WorldWideScience

Sample records for well completion

  1. STIMULATION TECHNOLOGIES FOR DEEP WELL COMPLETIONS

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2003-06-01

    The Department of Energy (DOE) is sponsoring a Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a project to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. Phase 1 was recently completed and consisted of assessing deep gas well drilling activity (1995-2007) and an industry survey on deep gas well stimulation practices by region. Of the 29,000 oil, gas and dry holes drilled in 2002, about 300 were drilled in the deep well; 25% were dry, 50% were high temperature/high pressure completions and 25% were simply deep completions. South Texas has about 30% of these wells, Oklahoma 20%, Gulf of Mexico Shelf 15% and the Gulf Coast about 15%. The Rockies represent only 2% of deep drilling. Of the 60 operators who drill deep and HTHP wells, the top 20 drill almost 80% of the wells. Six operators drill half the U.S. deep wells. Deep drilling peaked at 425 wells in 1998 and fell to 250 in 1999. Drilling is expected to rise through 2004 after which drilling should cycle down as overall drilling declines.

  2. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-09-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a study to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. An assessment of historical deep gas well drilling activity and forecast of future trends was completed during the first six months of the project; this segment of the project was covered in Technical Project Report No. 1. The second progress report covers the next six months of the project during which efforts were primarily split between summarizing rock mechanics and fracture growth in deep reservoirs and contacting operators about case studies of deep gas well stimulation.

  3. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2005-06-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies conducted a study to evaluate the stimulation of deep wells. The objective of the project was to review U.S. deep well drilling and stimulation activity, review rock mechanics and fracture growth in deep, high-pressure/temperature wells and evaluate stimulation technology in several key deep plays. This report documents results from this project.

  4. Sand control systems used in completing wells

    Directory of Open Access Journals (Sweden)

    Gabriel Wittenberger

    2005-12-01

    Full Text Available Expandable Tubular Technology is transforming the face of well completion and construction. This technology provides: a substantially higher hydrocarbon production rates from the reservoir, a reduced well drilling and construction costs, new possibilities for previously unreachable or uneconomic reservoirs, and step a change towards the single diameter well. ESS (Expandable Sand Screen has an unrivalled performance worldwide for delivering a reliable sand control in a wide range of applications. Well costs typically cut by over 20 %, and the productivity increases up to 70 %.

  5. Entiat 4Mile WELLs Completion Report, 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Malinowksi, Richard

    2007-01-01

    The Entiat 4-mile Wells (Entiat 4-mile) project is located in the Entiat subbasin and will benefit Upper Columbia steelhead, spring Chinook and bull trout. The goal of this project is to prevent juvenile fish from being diverted into an out-of-stream irrigation system and to eliminate impacts due to the annual maintenance of an instream pushup dam. The objectives include eliminating a surface irrigation diversion and replacing it with two wells, which will provide Bonneville Power Administration (BPA) and the Bureau of Reclamation (Reclamation) with a Federal Columbia River Power System (FCRPS) BiOp metric credit of one. Wells were chosen over a new fish screen based on biological benefits and costs. Long-term biological benefits are provided by completely eliminating the surface diversion and the potential for fish entrainment in a fish screen. Construction costs for a new fish screen were estimated at $150,000, which does not include other costs associated with implementing and maintaining a fish screening project. Construction costs for a well were estimated at $20,000 each. The diversion consisted of a pushup dam that diverted water into an off-channel pond. Water was then pumped into a pressurized system for irrigation. There are 3 different irrigators who used water from this surface diversion, and each has multiple water right claims totaling approximately 5 cfs. Current use was estimated at 300 gallons per minute (approximately 0.641 cfs). Some irrigated acreage was taken out of orchard production less than 5 years ago. Therefore, approximately 6.8 acre-feet will be put into the State of Washington Trust Water Right program. No water will be set aside for conservation savings. The construction of the two irrigation wells for three landowners was completed in September 2006. The Lower Well (Tippen/Wick) will produce up to 175 gpm while the Upper Well (Griffith) will produce up to 275 gpm during the irrigation season. The eight inch diameter wells were

  6. Completion techniques for geothermal-geopressured wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, W.E.

    1974-01-01

    The following are covered: oil well completions, water well completions, sand control techniques, geopressured oil and gas wells, and geopressured water well completion. The conclusions for a geothermal-geopressured water well completion and needed research are included. (MHR)

  7. A selection method of the horizontal wells completion

    Directory of Open Access Journals (Sweden)

    Ivica Ristović

    2006-10-01

    Full Text Available The completion of horizontal wells can be done by different ways and depends on production constraints and the reservoir characteristics.The selection of a completon method is directly influenced by the degree of rock consolidation, the need for water or gas shut off,the anticipated flow rate, the completion longevity, the shale reactivity and the stability, the degree of grain sorting and the lamination.In this article, the possible methods for the horizontal well completion are shown. Also, it is presented the horizontal well completion selection flowchart. This algorithm is made on the basis of a large number of wells’ analysis considering reservoir characteristics and production constraints.

  8. Predrilled liner / barefoot completions in horizontal sour gas wells

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.W. [Mobil Erdgas-Erdoel GmbH, Celle (Germany)

    1999-09-01

    When selecting the completion type of a horizontal well, all relevant production and reservoir engineering aspects have to be taken into consideration to ensure safe and optimised long-term production. Especially in the case of sour gas wells, which require corrosion-resistant and expensive alloys, the technical/economic need to run a liner in the horizontal section is often discussed. This paper compares the preinvestment for a 'predrilled liner' with the cost of downhole operations which may become necessary in a 'barefoot completion'. These calculated 'risked savings' - as a function of the horizontal length - lead to a break-even point which is intended to assist in the decision to run a liner in sour gas wells or not. (orig.)

  9. Drilling and Completion of the Urach III HDR Test Well

    Energy Technology Data Exchange (ETDEWEB)

    Meier, U.; Ernst, P. L.

    1981-01-01

    The hot dry rock (HDR) test well, urach III, was drilled and completed in 1979. The borehole is located in Southwest Germany in the geothermal anomaly of Urach. The purpose of project Urach was to study drilling and completion problems of HDR wells and to provide a test site for a HDR research program. The Urach III borehole was drilled to a total depth of 3,334 meters (10,939 feet), penetrating 1,700 meters (5,578 feet) into the granitic basement. Extensive coring was required to provide samples for geophysical and geochemical studies. Positive displacement downhole motors were used for coring and normal drilling operations. It was found that these motors in combination with the proper bits gave better results than conventional rotary drilling. Loss of circulation was encountered not only in sedimentary rocks but also in the granite. After drilling and completion of the borehole, a number of hydraulic fracturing experiments were performed in the open hole as well as in the cased section of Urach III. A circulation loop was established by using the single-borehole concept. It is not yet clear whether new fractures have actually been generated or preexisting joints and fissures have been reactivated. Evaluation of the results of this first step is almost completed and the planning of Phase II of the Urach project is under way.

  10. Completion report for Well Cluster ER-20-5

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The Well Cluster ER-20-5 drilling and completion project was conducted for the US Department of Energy, Nevada Operations Office (DOE/NV), in support of the Nevada Environmental Restoration Project at the Nevada Test Site (NTS) in Nye County, Nevada. Its primary tasks include collecting geological, geophysical, hydrological, and water chemistry data from new and existing wells to define groundwater quality in addition to pathways and rates of groundwater migration. A program of drilling wells near the sites of selected underground nuclear tests (near-field drilling) was implemented to obtain site-specific data about the nature and extent of migration of radionuclides that might have been produced by an underground nuclear explosion. Well Cluster ER-20-5 is the first near-field drilling project initiated at the NTS. This document presents construction data and summarizes the scientific data gathered during the drilling and well-installation phases for all three holes drilled at Well Cluster ER-20-5. Some of this information is preliminary and unprocessed, but was released so that drilling, geotechnical, well design, and completion data could be rapidly disseminated. Additional information about water levels, aquifer testing, and groundwater sampling will be reported after any of this work is performed. Any additional geologic and/or geophysical investigations conducted for this project is described in one or more analysis and interpretation reports. The lithologic and stratigraphic logs, however, are provided in final form.

  11. Geopressured-geothermal well report. Volume I. Drilling and completion

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Gladys McCall site activities are covered through the completion of the test well and salt water disposal well. The test well was drilled to a total depth of 16,510 feet, then plugged back to 15,831 feet. Three 4'' diameter diamond cores were taken for analysis. An existing well on site, the Getty-Butts Gladys McCall No. 1, was reentered and completed to a depth of 3514 feet as a salt water disposal well. The geologic interpretation of the Gladys McCall site indicated target sands for testing at 15,080 feet through 15, 831 feet. Reservoir fluid temperature at this depth is estimated to be approximately 313/sup 0/F and pressure is estimated to be +-12,800 psi. The preliminary reservoir volume estimate is 3.6 billion barrels of brine. The design wells program includes environmental monitoring of the Gladys McCall site by Louisiana State University. Field stations are set up to monitor surface and ground water quality, subsidence, land loss and shoreline erosion, and seismicity. As of December 31, 1981 the study shows no significant impact on the environment by site operations.

  12. Completion Techniques for Geothermal-Geopressured Wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, W.E.; Dorfman, M.H.; Podio, A.L.

    1974-01-01

    Geological studies have established that geothermal-geopressured formations can be found at depths of 10,000 to 18,000 feet in the Gulf Coast area of Texas and Louisiana. Bottom hole pressures are in the range of 9,000 to 15,000 psig and temperatures 250-350 F. Test wells to tap these reservoirs can be drilled routinely, utilizing available equipment and methods. Electric logs, surveys, cores and production tests can be used to assess these resources and to evaluate their economic viability as primary sources of energy. But it will be necessary to complete the wells in such fashion that production of the high-pressured fluid can be obtained to deliver heat, mechanical energy and methane gas in economic quantities. This will require carefully considered completion techniques, involving pipe sizes and accessory equipment suitable for high volumes of fluid. Completion operations may include formation stimulation treatments and/or sand control measures to obtain optimum rates of flow with minimum sand influx. It appears that gravel-packed completions will be more feasible at this time than chemical consolidation treatments to control sand production because of high temperatures, thick producing intervals, and high-velocity flow rates. Flow rates up to 100 barrels per day per foot of perforations should be possible from consolidated formations without sand control treatments.

  13. Geothermal well technology: drilling and completions program plan

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, M.M.; Barnett, J.H.; Baker, L.E.; Varnado, S.G.; Polito, J.

    1978-03-01

    The drilling and completion portion of the long-range Geothermal Well Technology Program is presented. A nine-year program is outlined based upon an objective of reducing the cost of geothermal energy development and providing a major stimulus to meeting the power-on-line goals established by the Department of Energy. Major technological challenges to be addressed in this program include improvements in geothermal drilling fluids, downhole drilling motors, rock bits and the development of high flow rate, high temperature completion and reinjection techniques. In addition, fundamental studies will be conducted in drilling energetics to improve the understanding of drilling mechanics. This will lead to advanced development of high performance, low cost geothermal drilling systems.

  14. Completion report for Well ER-EC-6

    Energy Technology Data Exchange (ETDEWEB)

    M. J. Townsend

    2000-05-01

    Well ER-EC-6 was drilled for the U.S. Department of Energy, Nevada Operations Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in the spring of 1999 as part of the DOE's hydrogeologic investigation well program in the Western Pahute Mesa - Oasis Valley region just west of the Nevada Test Site. A 66-centimeter surface hole was drilled and cased off to the depth of 485.1 meters below the surface. The hole diameter was then decreased to 31.1 centimeters for drilling to a total depth of 1,524.0 meters. A preliminary composite, static, water level was measured at the depth of approximately 434.6 meters prior to installation of the completion string. One completion string with four isolated, slotted intervals was installed in the well. Detailed lithologic descriptions with preliminary stratigraphic assignments are included in the report. These are based on composite drill cuttings collected every 3 meters and 33 sidewall samples taken at various depths below 504.4 meters, supplemented by geophysical log data. Detailed chemical and mineralogical studies of rock samples are in progress. The well penetrated Tertiary-age lava and tuff of the Timber Mountain Group, the Paintbrush Group, the Calico Hills Formation, and the Volcanics of Quartz Mountain. Intense hydrothermal alteration was observed below the depth of 640 m. The preliminary geologic interpretation indicates that this site may be located on a buried structural ridge that separates the Silent Canyon and Timber Mountain caldera complexes.

  15. Completion Report for Well ER-EC-7

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2004-10-01

    Well ER-EC-7 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in the summer of 1999 as part of the Department of Energy's hydrogeologic investigation program in the Western Pahute Mesa - Oasis Valley region just west of the Test Site. A 44.5-centimeter surface hole was drilled and cased off to a depth of 265.8 meters below the surface. The hole diameter was then decreased to 31.1 centimeters for drilling to a total depth of 422.5 meters. The planned depth of 762 meters was not reached due to borehole stability problems. One completion string with two isolated slotted intervals was installed in the well. A preliminary composite, static, water level was measured at the depth of 227.8 meters, 20 days after installation of the completion string. Detailed lithologic descriptions with stratigraphic assignments are included in the report. These are based on composite drill cuttings, supplemented by geophysical log data, and incorporating data from detailed chemical and mineralogical studies of rock samples. Beneath a thin alluvial deposit, the well penetrated 410 meters of lava and bedded tuff of the Volcanics of Fortymile Canyon Group, deposited in the Timber Mountain caldera moat after caldera collapse. The geologic interpretation of data from this well provides information on the thickness, lithologic composition, and hydrogeologic character of moat-filling rocks in the southern portion of the Timber Mountain caldera complex in the southwestern Nevada volcanic field.

  16. Completion Report for Well ER-EC-2A

    Energy Technology Data Exchange (ETDEWEB)

    M. J. Townsend

    2002-03-01

    Well ER-EC-2A was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office, in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in January and February of 2000 as part of a hydrogeologic investigation program in the Pahute Mesa - Oasis Valley region just west of the Nevada Test Site. A 44.5-centimeter surface hole was drilled and cased off to a depth of 412.9 meters below the surface. The hole diameter was then decreased to 31.1 centimeters for drilling to a total depth of 1,516.1 meters. One completion string with three isolated slotted intervals was installed in the well. A preliminary composite, static water level was measured at the depth of 228.0 meters, approximately two months after installation of the completion string. Detailed lithologic descriptions with preliminary stratigraphic assignments are included in this report. These are based on composite drill cuttings collected every 3 meters, and 81 sidewall samples taken at various depths below 212 meters, supplemented by geophysical log data. Detailed petrographic, chemical, and mineralogical studies of rock samples were conducted on 30 samples. The well was collared in rhyolite lava and penetrated Tertiary-age lava and tuff of the Volcanics of Fortymile Canyon and the Timber Mountain Group. The preliminary geologic interpretation of borehole data indicates that this well was drilled within the margins of the buried Rainier Mesa and Ammonia Tanks calderas, and that caldera collapse in this area was deeper than expected, resulting in a section of Volcanics of Fortymile Canyon (caldera-filling deposit) that is much thicker than expected.

  17. Completion report for Well Cluster ER-20-6

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Well Cluster ER-20-6 drilling and completion project was conducted during February, March, and April of 1996 in support of the Nevada Environmental Restoration Project at the Nevada Test Site (NTS), Nye County, Nevada. This project is part of the DOE`s Underground Test Area (UGTA) subproject at the NTS. The primary UGTA tasks include collecting geological, geophysical, and hydrological data from new and existing wells to define groundwater quality as well as pathways and rates of groundwater migration at the NTS. A program of drilling wells near the sites of selected underground nuclear tests (near-field drilling) was implemented as part of the UGTA subproject to obtain site-specific data on the nature and extent of migration of radionuclides produced by an underground nuclear explosion. The ER-20-6 near-field drilling project was originally planned to be very similar to that recently conducted at Well Cluster ER-20-5, which was designed to obtain data on the existing hydrologic regime near the site of an underground nuclear explosion (IT, 1995; IT, 1996a). However, after further consideration of the goals of the near-field drilling program and the characteristics of the BULLION site, the TWG recommended that the ER-20-6 project be redesigned to accommodate a forced-gradient experiment. This proposed experiment is expected to yield more realistic estimates of transport parameters than can be deduced from sampling and testing natural groundwater flow systems.

  18. COMPLETION REPORT FOR WELL CLUSTER ER-5-3

    Energy Technology Data Exchange (ETDEWEB)

    BECHTEL NEVADA

    2005-12-01

    Well Cluster ER-5-3 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This cluster of 3 wells was drilled in 2000 and 2001 as part of a hydrogeologic investigation program in Frenchman Flat. The first borehole in the cluster, Well ER-5-3, was drilled in February and March 2000. A 47.0-centimeter surface hole was drilled and cased off to the depth of 374.8 meters. The hole diameter was decreased to 31.1 centimeters for drilling to a total depth of 794.3 meters within welded ash-flow tuff. A piezometer string with 1 slotted interval was installed in the annulus of the surface casing, open to the saturated alluvium. A completion string with 2 slotted intervals was installed in the main hole, open to saturated alluvium and to the welded tuff aquifer. A second piezometer string with 1 slotted interval open to the welded-tuff aquifer was installed outside the completion string. Well ER-5-3 No.2 was drilled about 30 meters west of the first borehole in March 2000, and was recompleted in March 2001. A 66.0-centimeter hole was drilled and cased off to the depth of 613.8 meters. The hole diameter was decreased to 44.5 centimeters and the borehole was drilled and cased off to the depth of 849.0 meters. The hole diameter was decreased once more to 31.1 centimeters for drilling to a total depth of 1,732.2 meters in dolomite. A completion string open to the dolomite (lower carbonate aquifer) was installed. Well ER-5-3 No.3 was drilled approximately 30 meters north of the first 2 boreholes in February 2001. A 66.0-centimeter hole was drilled and cased off to the depth of 36.6 meters, then the main 25.1-centimeter-diameter hole was drilled to a total depth of 548.6 meters in alluvium. A slotted stainless-steel tubing string was installed in the saturated alluvium. A preliminary composite, static water level was measured at

  19. Course An Introduction to Geothermal Resources - Well Completion Production Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ascuaga, John; Garrett, B.D. (Slim)

    1987-10-01

    A course to introduce geothermal energy held in Sparks, Nevada on October 1987. Topics included well draining and well computation production equipment. There is much technical detail and some cost detail. [DJE-2005

  20. Polymer-cement geothermal-well-completion materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zeldin, A.N.; Kukacka, L.E.

    1980-07-01

    A program to develop high-temperature polymer cements was performed. Several formulations based on organic and semi-inorganic binders were evaluated on the basis of mechanical and thermal stability, and thickening time. Two optimized systems exhibited properties exceeding those required for use in geothermal wells. Both systems were selected for continued evaluation at the National Bureau of Standards and contingent upon the results, for field testing in geothermal wells.

  1. Completion Report for Well Cluster ER-6-1

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2004-10-01

    Well Cluster ER-6-1 was constructed for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Division at the Nevada Test Site, Nye County, Nevada. This work was initiated as part of the Groundwater Characterization Project, now known as the Underground Test Area Project. The well cluster is located in southeastern Yucca Flat. Detailed lithologic descriptions with stratigraphic assignments for Well Cluster ER-6-1 are included in this report. These are based on composite drill cuttings collected every 3 meters and conventional core samples taken below 639 meters, supplemented by geophysical log data. Detailed petrographic, chemical, and mineralogical studies of rock samples were conducted on 11 samples to resolve complex interrelationships between several of the Tertiary tuff units. Additionally, paleontological analyses by the U.S. Geological Survey confirmed the stratigraphic assignments below 539 meters within the Paleozoic sedimentary section. All three wells in the Well ER-6-1 cluster were drilled within the Quaternary and Tertiary alluvium section, the Tertiary volcanic section, and into the Paleozoic sedimentary section.

  2. Completion Report for Well ER-2-1

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2004-10-01

    Well ER-2-1 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (formerly Nevada Operations Office), in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in February and March of 2003, as part of a hydrogeologic investigation program for the Yucca Flat/Climax Mine Corrective Action Unit in the northeastern portion of the Nevada Test Site. Well ER-2-1 was drilled as part of the Yucca Flat Corrective Action Unit Phase I drilling initiative. The well is located in north central Yucca Flat within Area 2 of the Nevada Test Site, and provided information regarding the radiological and physical environment near underground nuclear tests conducted in a saturated volcanic aquifer setting. Detailed lithologic descriptions with stratigraphic assignments are included in this report. These are based on composite drill cuttings collected every 3 meters and 83 sidewall samples taken at various depths between 113.7 and 754.4 meters, supplemented by geophysical log data. Detailed petrographic, chemical, and mineralogical studies of rock samples were conducted on 27 samples of drill cuttings. The well was collared in tuffaceous alluvium, and penetrated Tertiary-age tuffs of the Timber Mountain and Paintbrush Groups, Calico Hills and Wahmonie Formations, Crater Flat Group, Grouse Canyon Formation, before reaching total depth in the Tunnel Bed Formation.

  3. Shale Gas Well Completions and Maximizing Gas Recoveries

    Institute of Scientific and Technical Information of China (English)

    Michael D. Burnaman; Stephen Smith; Wenwu Xia

    2009-01-01

    It is shown that stress fields within the earth are the principle control for hydraulic fracture direction in horizontal shale gas wells. Hydraulic fracturing is a process of increasing permeability within gas shales and involves a sophisticated organization of technology, good planning and proper management of equipment over a very short time period to be successful.The direction and extent of the induced fractures can be determined in near real-time at the well site via application of earthquake seismology theory in a now common process known as frac mapping. Next to the horizontal lateral azimuth, the total volume of slurry pumped into the well is a major factor in determining well EURs. Vertical fracture growth can be controlled and is important in concentration of the slurry within the main zone target zone that has the high TOC and porosity. Cemented casing with perforations is currently the most used method for zone isolation. New open-hole sleeve packers may eventually provide more flexibility in fracture design while also providing a means for refracturing multi-stage fractured horizontal wells, a technique not now commonly available. Multi-Stage fracture design requires incorporating rock properties with fracturing effect simulations and then verifying results using 3D reservoir simulations. Maximizing the gas recovery factors and EURs can be accomplished through use of closely spaced laterals with inter-fingered fracture stages and exploiting the stress shadow fracturing phenomenon.Even greater EURs may be possible if the wells can be refractured thereby opening up additional permeability channels. Shale gas development has progressed in an environmentally sensitive manner within the U.S. and will continue in this manner.During the past ten years, all of these technologies have been either newly developed or were the advancement of existingtechnology with modifications. The opportunity exists to take these proven technologies to other areas of the world

  4. Completion Report for Well ER-7-1

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2004-11-01

    Well ER-7-1 was drilled for the U.S. Department of Energy's National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in January and February 2003, as part of a hydrogeologic investigation program in Yucca Flat. A 47.0-centimeter surface hole was drilled and cased off to a depth of 541.0 meters below the surface. The hole diameter was then decreased to 31.8 centimeters for drilling to a total depth of 762.0 meters. Detailed lithologic descriptions with stratigraphic assignments are included in this report. These are based on composite drill cuttings collected every 3 meters, and 62 sidewall samples taken at various depths below 85.3 meters, supplemented by geophysical log data. Detailed petrographic, chemical, and mineralogical studies were conducted on 22 samples of cuttings. The well was collared in Quaternary surficial deposits and penetrated a thick section of Tertiary-age volcanic deposits before terminating in carbonate rocks of Paleozoic-age.

  5. Completion Report for Well ER-8-1

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2004-11-01

    Well ER-8-1 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in October and November of 2002 as part of a Hydrogeologic investigation program for the Yucca Flat/Climax Mine Corrective Action Unit in the northeastern portion of the Nevada Test Site. Well ER-8-1 is located at the north end of Yucca Flat approximately 580 meters south-southeast of the surface exposure of the Climax granitic intrusive. Detailed lithologic descriptions with stratigraphic assignments are included in this report. These are based on composite drill cuttings samples collected every 3 meters, and 21 sidewall samples taken at various depths between 351.1 and 573.0 meters, supplemented by incomplete geophysical log data. Detailed petrographic, geochemical, and mineralogical studies of rock samples were conducted on 22 samples of drill cuttings. Drilling began in tuffaceous alluvium, and the borehole penetrated Tertiary age bedded tuffs of the Volcanics of Oak Spring Butte and carbonate sediments of Paleozoic age, which were encountered at a depth of 334 meters. The borehole unexpectedly penetrated granite at the depth of 538.9 meters in which drilling was stopped. Contact metamorphic rocks and intrusive dikes associated with the Cretaceous-age granitic intrusive and at least one significant fault zone were encountered.

  6. Geothermal-well completions: a survey and technical evaluation of existing equipment and needs

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, J.E.; Snyder, R.E.

    1982-07-01

    The geothermal environment and associated well completion problems are reviewed. Existing well completion equipment is surveyed and limitations are identified. A technical evaluation of selected completion equipment is presented. The technical evaluation concentrates on well cementing equipment and identifies potential failure mechanisms which limit the effectiveness of these tools. Equipment employed in sand control, perforating, and corrosion control are identified as potential subjects for future technical evaluation.

  7. 78 FR 68079 - Information Collection Activities: Oil and Gas Well-Completion Operations; Submitted for Office...

    Science.gov (United States)

    2013-11-13

    ... INFORMATION: Title: 30 CFR 250, Subpart E, Oil and Gas Well-Completion Operations. OMB Control Number: 1014... driller's report. 517(d)(8) Function test ROV 10 17 wells 170 interventions on your subsea BOP stack... completions..... 13 autoshear and deadman on your subsea BOP stack during stump test; document all...

  8. Innovative well-completion strategy for challenging heavy-oil wells within mature fields requiring sand control in Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Huimin, YE; Patarroyo, Mauricio [Mansarovar Energy (Colombia); Lopez, Nicolas; Perez, Carlos [Schlumberger (Colombia)

    2011-07-01

    With the depletion of conventional oil resources and the development of new techniques, exploitation of heavy oil wells has become common in Northern South America. Nevertheless those projects face the great challenge of implementing environment and sand management systems while optimizing the production and reservoir's life. The aim of this paper is to present a completion methodology, its results and impacts on the productivity of the reservoir. Different simulations to select the sand control strategy and sensitivity studies to confirm their decision were carried out in the Moriche field, a heavy-oil mature field located in Colombia. Following the simulation results, stainless steel wool based screens were finally chosen and their implementation led to savings in time and costs and the elimination of downhole issues. The use of the completion methodology presented herein on the Moriche wells led to an overall improvement in productivity.

  9. Testing geopressured geothermal reservoirs in existing wells: Detailed completions prognosis for geopressured-geothermal well of opportunity, prospect #1

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, Clovis A.

    1980-04-03

    This prospective well of opportunity was originally drilled and completed as a gas producer by Wrightsman Investment Company in early 1973. The original and present producing interval was from 15,216 to 15,238 feet. IMC Exploration Company, Inc. acquired the property from Wrightsman and is the present owner operator. The well is presently shut in s a non-economic producer and IMC proposed to perform plug and abandonment operations in April, 1980. This well has a good geopressured-geothermal water sand behind the 5-1/2 inch casing that has 94 feet of net sand thickness. Pursuant to DOE/NVO authorization of March 11,1980, Eaton negotiated an option agreement with IMC whereby IMC would delay their abandonment operations for a period of 90 days to permit DOE to evaluate the well for geopressure-geothermal testing. The IMC-Eaton option agreements provide that IMG will delay plugging the well until June 15, 1980. If Eaton exercises its option to acquire the well, IMC will sell the well bore, and an adjacent salt water disposal well, to Eaton for the sole consideration of Eaton assuming the obligation to plug and abandon the wells in accordance with lease and regulatory requirements. If Eaton does not exercise its option, then Eaton will pay IMC $95,000 cash and IMC will proceed with plugging and abandonment at the termination of the option period.

  10. Testing geopressured geothermal reservoirs in existing wells: Detailed completion prognosis for geopressured-geothermal well of opportunity, prospect #2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    A geopressured-geothermal test of Martin Exploration Company's Crown Zellerbach Well No. 2 will be conducted in the Tuscaloosa Trend. The Crown Zellerbach Well No. 1 will be converted to a saltwater disposal well for disposal of produced brine. The well is located in the Satsuma Area, Livingston parish, Louisiana. Eaton proposes to test the Tuscaloosa by perforating the 7 inch casing from 16,718 feet to 16,754 feet. The reservoir pressure at an intermediate formation depth of 16,736 feet is anticipated to be 12,010 psi and the temperature is anticipated to be 297 F. Calculated water salinity is 16,000 ppm. The well is expected to produce a maximum of 16,000 barrels of water a day with a gas content of 51 SCF/bbl. Eaton will re-enter the test well, clean out to 17,000 feet, run production casing and complete the well. The disposal well will be re-entered and completed in the 9-5/8 inch casing for disposal of produced brine. Testing will be conducted similar to previous Eaton annular flow WOO tests. An optional test from 16,462 feet to 16,490 feet may be performed after the original test and will require a workover with a rig on location to perform the plugback. The surface production equipment utilized on previous tests will be utilized on this test. The equipment has worked satisfactorily and all parties involved in the testing are familiar with its operation. Weatherly Engineering will operate the test equipment. The Institute of Gas Technology (IGT) and Mr. Don Clark will handle sampling, testing and reservoir engineering evaluation, respectively. wireline work required will be awarded on basis of bid evaluation. At the conclusion of the test period, the D.O.E. owned test equipment will be removed from the test site, the test and disposal wells plugged and abandoned and the sites restored to the satisfaction of all parties.

  11. Method for completing a non-vertical portion of a subterranean well bore

    Energy Technology Data Exchange (ETDEWEB)

    Donovan, J.F.; Spatz, E.C.; Salerni, J.V.; Peterson, E.R.; Weirich, J.B.

    1990-04-10

    This patent describes a method of completing a well bore having a deviated configuration including an entry portion communicating with a curved portion extending downwardly in the well from the entry portion and a generally linear end portion traversable with a production formation. It comprises: forming a conduit including well isolation means, at least one screen element and at least one stabilizer means having at least one movable stabilizer portion movable from a first retracted position to a second expanded position; running the conduit into the well bore and manipulating the conduit to facilitate passage of the conduit through the curved portion of the well bore; setting the well isolation means to position the tubular screen means approximate the linear portion of the well bore; and actuating the stabilizer members to the second expanded position to engage the adjacent wall of the well bore and position the screen means away from the adjacent wall.

  12. Testing geopressured geothermal reservoirs in existing wells: Detailed completion prognosis for geopressured-geothermal well of opportunity, prospect #7

    Energy Technology Data Exchange (ETDEWEB)

    Godchaux, Frank A.

    1981-06-01

    This book is a detailed prognosis covering the acquisition, completion, drilling, testing and abandonment of the Frank A. Godchaux, III, Well No. 1 under the Wells of Opportunity Program. The well is located approximately 12 miles southeast of the city of Abbeville, Louisiana. Eaton Operating Company proposes to test a section of the Planulina sand at a depth ranging from 15,584 to 15,692 feet. The reservoir pressure is estimated to be 14,480 psi and the temperature of the formation water is expected to be 298 F. The water salinity is calculated to be 75,000 ppm. The well is expected to produce 20,000 barrels of water per day with a gas content of 44 standard cubic feet pre barrel. The well was acquired from C and K Petroleu, Inc. on March 20, 1981. C and K abandoned the well at a total depth of 16,000 feet. The well has a 7-5/8 inches liner set at 13,387 feet. Eaton proposes to set 5-1/2 inch casing at 16,000 feet and produce the well through the casing using a 2-3/8 inch tubing string for wireline protection and for pressure control. A 4,600 foot saltwater disposal well will be drilled on the site and testing will be conducted similar to previous Eaton tests. The total estimated cost to perform the work is $2,959,000. An optional test from 14,905 to 15,006 feet may be performed after the original test and will require a workover with a rig on location to perform the plugback. The surface production equipment utilized on previous Eaton WOO tests will be utilized on this test. This equipment has worked satisfactorily and all parties involved in the testing are familiar with its operation. The Institute of Gas Technology and Mr. Don Clark will handle the sampling and testing and reservoir evaluation, respectively, as on the previous Eaton tests.

  13. G. M. Koelemay well No. 1, Jefferson County, Texas. Volume I. Completion and testing: testing geopressured geothermal reservoirs in existing wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The acquisition, completion, and testing of a geopressured-geothermal well are described. The following are covered: geology; petrophysics; re-entry and completion operations - test well; drilling and completion operations - disposal well; test objectives; surface testing facilities; pre-test operations; test sequence; test results and analysis; and return of wells and location to operator. (MHR)

  14. 78 FR 48893 - Information Collection Activities: Oil and Gas Well-Completion Operations; Proposed Collection...

    Science.gov (United States)

    2013-08-12

    ... Bureau of Safety and Environmental Enforcement [Docket ID BSEE-2013-0004; OMB Control Number 1014-0004... Gas Well-Completion Operations. OMB Control Number: 1014-0004. Abstract: The Outer Continental Shelf... interventions on your 10 subsea BOP stack; document all test results; make available to BSEE upon request....

  15. Well Completion Report for Well ER-20-11, Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2013-02-27

    Well ER-20-11 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Management Operations Underground Test Area (UGTA) Activity at the Nevada National Security Site (formerly Nevada Test Site), Nye County, Nevada. The well was drilled in September 2012 as part of the Central and Western Pahute Mesa Corrective Action Unit Phase II drilling program. Well ER-20-11 was constructed to further investigate the nature and extent of radionuclidecontaminated groundwater encountered in two nearby UGTA wells, to help define hydraulic and transport parameters for the contaminated Benham aquifer, and to provide data for the UGTA hydrostratigraphic framework model. The 44.5-centimeter (cm) surface hole was drilled to a depth of 520.0 meters (m) and cased with 34.0-cm casing to 511.5 m. The hole diameter was then decreased to 31.1 cm, and the borehole was drilled to a total depth of 915.6 m. The hole was completed to allow access for hydrologic testing and sampling in the target aquifer, which is a lava-flow aquifer known as the Benham aquifer. The completion casing string, set to the depth of 904.3 m, consists of a string of 6 5/8-inch (in.) stainless-steel casing hanging from a string of 7 5/8-in. carbon-steel casing. The stainless-steel casing has one slotted interval at 796.3 to 903.6 m. One piezometer string was installed, which consists of 2 7/8-in. stainless-steel tubing that hangs from 2 3/8-in. carbon-steel tubing via a crossover sub. This string was landed at 903.8 m and is slotted in the interval 795.3 to 903.1 m. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, fluid samples (for groundwater chemistry analysis and tritium measurements), and water-level measurements. The well penetrated 915.6 m of Tertiary volcanic rock, including one saturated lava flow aquifer. Measurements on

  16. Method and apparatus for completing a non-vertical portion of a subterranean well bore

    Energy Technology Data Exchange (ETDEWEB)

    Donovan, J.F.; Spatz, E.C.; Salerni, J.V.; Peterson, E.R.; Weirich, J.B.

    1989-09-19

    This patent describes an apparatus for completing a well bore having a deviated configuration including an essentially vertical entry portion communicating with a curved portion extending away from the top surface of the well and communicating with a generally linear bore portion traversable with a production formation. It comprises: a plurality of tubular screen elements; a plurality of tubular stabilizer housings threadably interconnecting the tubular screen elements, thereby forming a tool string; means for securing the stabilizer elements in a radially retracted position during run-in of the screen elements into the generally linear portion of the well bore; and fluid pressure means for radially expanding the stabilizer elements into engagement with the wall of the generally linear portion of the well bore, thereby centering the tubular screen elements relative to the generally linear portion of the well bore. The method of completing a deviated subterranean well bore having a generally vertical entry portion and a nonvertical bore portion traversing a production formation. It comprises the steps of: inserting in the non-vertical well portion a plurality of tubular screen elements interconnected by tubular stabilizing housings; each stabilizer housing mounting a plurality of peripherally spaced, radially shiftable stabilizer elements; and placing the stabilizer elements in a radially retracted position during run in. The stabilizer elements being movable from retracted position and movable radially outwardly to engage the well bore when the tubular screen elements are positioned in the production formation.

  17. Comments on some of the drilling and completion problems in Cerro Prieto geothermal wells

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez A, B.; Sanchez G, G.

    1981-01-01

    From 1960 to the present, 85 wells with a total drilling length exceeding 160,000 m have been constructed at Cerro Prieto, a modest figure compared to an oil field. This activity took place in five stages, each characterized by changes and modifications required by various drilling and well-completion problems. Initially, the technical procedures followed were similar to those used in the oil industry. However, several problems emerged as a result of the relatively high temperatures found in the geothermal reservoir. The various problems that have been encountered can be considered to be related to drilling fluids, cements and cementing operations, lithology, geothermal fluid characteristics, and casings and their accessories. As the importance of high temperatures and the characteristics of the geothermal reservoir fluids were better understood, the criteria were modified to optimize well-completion operations, and satisfactory results have been achieved to date.

  18. New Technologies for the completion of underground gass storage wells in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Milan Gavenda

    2006-10-01

    Full Text Available At present we can´t imagine the gas trading without underground gas storages. That´s why there are more and more requirements for a gas storage performance and an enhancedof safety during the storage operating. In this article, new trends of the completion development of injection-production wells in underground gas storages in the Czech Republic are presented.

  19. Completion Summary for Well NRF-16 near the Naval Reactors Facility, Idaho National Laboratory, Idaho

    Science.gov (United States)

    Twining, Brian V.; Fisher, Jason C.; Bartholomay, Roy C.

    2010-01-01

    In 2009, the U.S. Geological Survey in cooperation with the U.S. Department of Energy's Naval Reactors Laboratory Field Office, Idaho Branch Office cored and completed well NRF-16 for monitoring the eastern Snake River Plain (SRP) aquifer. The borehole was initially cored to a depth of 425 feet below land surface and water samples and geophysical data were collected and analyzed to determine if well NRF-16 would meet criteria requested by Naval Reactors Facility (NRF) for a new upgradient well. Final construction continued after initial water samples and geophysical data indicated that NRF-16 would produce chemical concentrations representative of upgradient aquifer water not influenced by NRF facility disposal, and that the well was capable of producing sustainable discharge for ongoing monitoring. The borehole was reamed and constructed as a Comprehensive Environmental Response Compensation and Liability Act monitoring well complete with screen and dedicated pump. Geophysical and borehole video logs were collected after coring and final completion of the monitoring well. Geophysical logs were examined in conjunction with the borehole core to identify primary flow paths for groundwater, which are believed to occur in the intervals of fractured and vesicular basalt and to describe borehole lithology in detail. Geophysical data also were examined to look for evidence of perched water and the extent of the annular seal after cement grouting the casing in place. Borehole videos were collected to confirm that no perched water was present and to examine the borehole before and after setting the screen in well NRF-16. Two consecutive single-well aquifer tests to define hydraulic characteristics for well NRF-16 were conducted in the eastern SRP aquifer. Transmissivity and hydraulic conductivity averaged from the aquifer tests were 4.8 x 103 ft2/d and 9.9 ft/d, respectively. The transmissivity for well NRF-16 was within the range of values determined from past aquifer

  20. Completion Report for Well ER-12-3. Corrective Action Unit 99: Rainier Mesa - Shoshone Mountain

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2006-05-01

    Well ER-12-3 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. The well was drilled in March and April 2005 as part of a hydrogeologic investigation program for the Rainier Mesa-Shoshone Mountain Corrective Action Unit. The overall purpose of the well was to gather subsurface data to better characterize the hydrogeology of central Rainier Mesa, especially in the older Tertiary volcanic rocks and Paleozoic sedimentary rocks. The main 47.0-centimeter hole was drilled to a depth of 799.2 meters and cased with 33.97-centimeter casing to 743.1 meters. The hole diameter was then decreased to 31.1 centimeters, and the well was drilled to a total depth of 1,496.0 meters. The completion string consisted of 13.97-centimeter stainless steel casing, with two slotted intervals open to the lower carbonate aquifer, suspended from 19.37-centimeter carbon steel casing. A piezometer string was installed outside the 33.97-centimeter casing to a depth of 467.1 meters to monitor a zone of perched water within the Tertiary volcanic section. Data gathered during and shortly after hole construction include composite drill cuttings samples collected every 3 meters (extra cuttings samples were collected from the Paleozoic rocks for paleontological analyses), sidewall core samples from 35 depths, various geophysical logs, and water level measurements. These data indicate that the well penetrated 674.2 meters of Tertiary volcanic rocks and 821.7 meters of Paleozoic dolomite and limestone. Forty-nine days after the well was completed, but prior to well development and testing, the water level inside the main hole was tagged at the depth of 949.1 meters, and the water level inside the piezometer string was tagged at 379.9 meters.

  1. Well Completion Report for Corrective Action Unit 443 Central Nevada Test Area Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-12-01

    The drilling program described in this report is part of a new corrective action strategy for Corrective Action Unit (CAU) 443 at the Central Nevada Test Area (CNTA). The drilling program included drilling two boreholes, geophysical well logging, construction of two monitoring/validation (MV) wells with piezometers (MV-4 and MV-5), development of monitor wells and piezometers, recompletion of two existing wells (HTH-1 and UC-1-P-1S), removal of pumps from existing wells (MV-1, MV-2, and MV-3), redevelopment of piezometers associated with existing wells (MV-1, MV-2, and MV-3), and installation of submersible pumps. The new corrective action strategy includes initiating a new 5-year proof-of-concept monitoring period to validate the compliance boundary at CNTA (DOE 2007). The new 5-year proof-of-concept monitoring period begins upon completion of the new monitor wells and collection of samples for laboratory analysis. The new strategy is described in the Corrective Action Decision Document/Corrective Action Plan addendum (DOE 2008a) that the Nevada Division of Environmental Protection approved (NDEP 2008).

  2. Completion Report for Model Evaluation Well ER-5-5: Corrective Action Unit 98: Frenchman Flat

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Underground Test Area and Boreholes Programs and Operations

    2013-01-18

    Model Evaluation Well ER-5-5 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in July and August 2012 as part of a model evaluation well program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radiological data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to obtain data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test MILK SHAKE, conducted in Emplacement Hole U-5k in 1968, which were considered to be uncertain due to the unknown extent of a basalt lava-flow aquifer present in this area. Well ER-5-5 is expected to provide information to refine the Phase II Frenchman Flat hydrostratigraphic framework model, if necessary, as well as to support future groundwater flow and transport modeling. The 31.1-centimeter (cm) diameter hole was drilled to a total depth of 331.3 meters (m). The completion string, set at the depth of 317.2 m, consists of 16.8-cm stainless-steel casing hanging from 19.4-cm carbon-steel casing. The 16.8-cm stainless-steel casing has one slotted interval open to the basalt lava-flow aquifer and limited intervals of the overlying and underlying alluvial aquifer. A piezometer string was also installed in the annulus between the completion string and the borehole wall. The piezometer is composed of 7.3-cm stainless-steel tubing suspended from 6.0-cm carbon-steel tubing. The piezometer string was landed at 319.2 m, to monitor the basalt lava-flow aquifer. Data collected during and shortly after hole construction include

  3. High-temperature cementing materials for completion of geothermal wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kalyoncu, R.S.; Snyder, M.J.

    1981-05-01

    Several portland cement types, oil well cements, and various additives and admixtures were evaluated during the course of development of a number of promising compositions suitable for geothermal applications. Among the cements and various materials considered were portland cement Types I, III, and V; oil well cement Classes G, H, and J; and additives such as silica flour, blast furnace slags, pozzolan, hydrated lime, perlite, and aluminum phosphate. Properties of interest in the study were thickening time, compressive strength, cement-to-metal bond strength, and effects of the cements on the corrosion of steel well casings. Testing procedures and property data obtained on a number of compositions are presented and discussed. Several cementing compositions comprised of Class J oil well cement, pozzolan, blast furnace slags, and silica flour were found to possess properties which appear to make them suitable for use in geothermal well completions. Five of the promising cementing compositions have been submitted to the National Bureau of Standards for additional testing.

  4. Completion Report for Model Evaluation Well ER-11-2: Corrective Action Unit 98: Frenchman Flat

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Underground Test Area and Boreholes Programs and Operations

    2013-01-22

    Model Evaluation Well ER-11-2 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in August 2012 as part of a model evaluation program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radionuclide data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to provide data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test PIN STRIPE, conducted in borehole U-11b in 1966. Well ER-11-2 will provide information that can be used to refine the Phase II Frenchman Flat hydrostratigraphic framework model if necessary, as well as to support future groundwater flow and transport modeling. The main 31.1-centimeter (cm) hole was drilled to a total depth of 399.6 meters (m). A completion casing string was not set in Well ER-11-2. However, a piezometer string was installed in the 31.1-cm open hole. The piezometer is composed of 7.3-cm stainless-steel tubing hung on 6.0-cm carbon-steel tubing via a crossover sub. The piezometer string was landed at 394.5 m, for monitoring the lower tuff confining unit. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, water quality (including tritium and other test-related radionuclides) measurements, and water level measurements. The well penetrated 42.7 m of Quaternary and Tertiary alluvium and 356.9 m of Tertiary volcanic rock. The water-level measured in the piezometer string on September 25, 2012, was 353.8 m below ground surface. No

  5. Completion Report for Well ER-16-1 Corrective Action Unit 99: Rainier Mesa - Shoshone Mountain

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2006-12-01

    Well ER-16-1 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. The well was drilled in June and July 2005 as part of a hydrogeologic investigation program for the Rainier Mesa-Shoshone Mountain Corrective Action Unit, Number 99. The overall purpose of the well was to gather subsurface data to better characterize the hydrogeology of the Shoshone Mountain area, especially in the older Tertiary and pre-Tertiary strata. The main 46.99-centimeter hole was drilled to a depth of 702.9 meters and cased with 33.97-centimeter casing to 663.7 meters. The hole diameter was then decreased to 31.1 centimeters, and the well was drilled to total depth of 1,220.7 meters. A completion string set at the depth of 1,162.4 meters consisted of 13.97-centimeter stainless-steel casing, with one continuous slotted interval open to the lower carbonate aquifer. The fluid level in the borehole soon dropped, so the borehole was deepened in July 2006. To deepen the borehole, the slotted section was cemented and a 12.1-centimeter hole was drilled through the bottom of the completion string to the new total depth of 1,391.7 meters, which is 171.0 meters deeper than the original borehole. A string of 6.03-centimeter carbon-steel tubing with one continuous slotted interval at 1,361.8 to 1,381.4 meters, and open to the lower carbonate aquifer, was installed in the well with no gravel packing or cement, to serve as a monitoring string. Data gathered during and shortly after hole construction include composite drill cuttings samples collected every 3 meters (extra cuttings samples were collected from the Paleozoic rocks for paleontological analyses), sidewall core samples from 37 depths, various geophysical logs, and water level measurements. These data indicate that the well penetrated 646.8 meters of Tertiary volcanic rocks and 744.9 meters

  6. Godchaux Well No. 1, Vermilion Parish, Louisiana: completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The Godchaux Well No. 1 was originally drilled too a total depth of 16,000 feet in January, 1981 by C and K Petroleum, Inc. and was temporarily abandoned. The well was re-entered by Eaton on 6 August 1981 in an effort to clean out the original open hole below the 7-5/8 inch liner and test a section of the Planulina sand at a depth ranging from 15,584 to 15,692 feet. The reservoir pressure was estimated to be 14,480 psi, and the temperature of the formation water was expected to be 298/sup 0/F. The water salinity was predicted to be 70,000 ppM. The well was expected to produce up to 20,000 BWPD, was a gas content of 44 SCF per barrel. An optional test of a zone from 14,905 to 15,006 feet was also proposed in the detailed completion prognosis, which preceded the attempted test. In the process of drilling the cement plug set by the original operators, the drill string became side-tracked from the original hole. While drilling at 14,510 feet a severe loss of circulation of drilling fluid occurred through a hole in the intermediate casing. The reduction in hydrostatic head resulting from lost circulation caused the open hole to close around and stick the drill string. Efforts to repair the intermediate casing and return to normal operations were estimated to be prohibitively expensive in view of the expected poor probability of success; accordingly, the decision to plug and abandon was carried out on September 12, 1981.

  7. Investigation and Evaluation of Geopressured-Geothermal Wells; Detailed Completion Prognosis for Geopressured-Geothermal Well of Opportunity Prospect No.6; Beulah Simon No. 2 Well

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-04-06

    This well of opportunity (WOO) geopressured-geothermal prospect has been drilled to 15,265 feet by Southport Exploration, Inc. (Southport) as the Beulah Simon No. 2 Well. The well is located in Section 26, T11S, R2E, Vermilion Parish, Louisiana, approximately four miles northeast of the town of Kaplan. The wellsite is shown on the enclosed section of USGS topographic sheet, ''Lafayette, La.'', and is accessible by State Highway 13 from Interstate Highway 10. The well was drilled approximately one mile east of the Southport et al. Beulah Simon No. 1 Well in the Cossinade Field. The Beulah Simon No. 1 Well is producing natural gas from a zone which is separate and distinct from the target reservoir in the No. 2 Well.

  8. Borehole Completion and Conceptual Hydrogeologic Model for the IFRC Well Field, 300 Area, Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Bjornstad, Bruce N.; Horner, Jacob A.; Vermeul, Vincent R.; Lanigan, David C.; Thorne, Paul D.

    2009-04-20

    A tight cluster of 35 new wells was installed over a former waste site, the South Process Pond (316-1 waste site), in the Hanford Site 300 Area in summer 2008. This report documents the details of the drilling, sampling, and well construction for the new array and presents a summary of the site hydrogeology based on the results of drilling and preliminary geophysical logging.

  9. Crown Zellerbach Well No. 2, Livingston Parish, Louisiana. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The Crown Zellerbach Well No. 2, approximately 23 miles east of Baton Rouge, Louisiana, is the eighth successful test of a geopressured-geothermal aquifer under the DOE Wells of Opportunity program. The well was tested through the annulus between 7-inch casing and 2-3/8 inch tubing. Two flow tests and one reservoir pressure buildup test were conducted on the lower zone during a 13-day period. A total of 12,489 barrels of water was produced. The highest flow rate achieved was about 3887 BWPD. One flow test followed by a buildup period was conducted on the combined upper and lower zones during a 3-day period. A total of 4739 barrels of water was produced. The highest flow rate achieved was about 3000 BWPD. The gas/water ratio measured during testing was about 32.0 SCF/BBL for the lower zone. The extrapolated latoratory data indicates that the solubility of the gas is 55.7 SCF/BBL. It appears that the reservoir brine is considerably undersaturated. The methane content of the flare line gas averaged 71.0 mole percent. Crown Zellerbach Company carefully studied the commercial feasibility of using the well to produce energy for a wood-drying facility and decided against the project.

  10. Prairie Canal Well No. 1, Calcasieu Parish, Louisiana. Volume 1. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The Prairie Canal Company, Inc. Well No. 1, approximately 8 miles south of the city of Lake Charles, Louisiana, was tested through the annulus between 5-1/2 inch casing and 2-3/8 inch tubing. The interval tested was from 14,782 to 14,820 feet. The geological section was the Hackberry Sand, a member of the Oligocene Frio formation. Produced water was injected into a disposal well which was perforated in several Miocene Sands from 3070 to 4600 feet. Original plans were to test a section of the Hackberry sand from 14,976 to 15,024 feet. This primary zone, however, produced a large amount of sand, shale, gravel, and rocks during early flow periods and was abandoned in favor of the secondary zone. Four pressure drawdown flow tests and three pressure buildup tests were conducted during a 12-day period. A total of 36,505 barrels of water was produced. The highest sustained flow rate was approximately 7100 BWPD. The gas-to-water ratio, measured during testing, ranged from 41 to 50 SCF/BBL. There is disagreement as to the saturation value of the reservoir brine, which may be between 43.3 and 49.7 SCF/BBL. The methane content of the flare line gas averaged 88.4 mole percent. The CO/sub 2/ content averaged 8.4 mole percent. Measured values of H/sub 2/S in the gas were between 12 and 24 ppM.

  11. Advanced high-temperature lightweight foamed cements for geothermal well completions

    Energy Technology Data Exchange (ETDEWEB)

    Sugama, T.; Kukacka, L.E.; Galen, B.G.

    1986-04-01

    Foamed cement slurries that were prepared by mixing a cementitious material having a Class H cement-to-silica flour ratio of 1.0 in conjunction with a alpha-olefin sulfate foam surfactant and a coconut diethanolamide foam stabilizer were exposed in an autoclave at a temperature of 300/sup 0/C and a hydrostatic pressure of 2000 psi (13.79 MPa). One lightweight slurry having a density of 9.61 lb/gal (1.15 g/cc) yielded a cellular cement having a compressive strength at 24 hr of >1000 psi (6.9 MPa) and a water permeability of approx.10/sup -3/ darcys. The factors responsible for the attainment of these mechanical and physical properties were identified to be well-crystallized truscottite phases and a uniform distribution of discrete fine bubbles. The addition of graphite fiber reinforcement for the cement matrix significantly suppressed any segregation of foam caused by thermal expansion of the air bubbles and further improved the mechanical characteristics of the cured cements.

  12. Computation of the pseudoskin factor caused by a restricted-entry well completed in a multilayer reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, N.; Reynolds, A.C.

    1989-06-01

    This work considers flow to a restricted-entry well in a single- or multilayer reservoir where crossflow occurs between reservoir layers. A simple algebraic expression for approximating the pseudoskin factor caused by restricted entry is presented. It is shown that, for practical purposes, this equation yields sufficiently accurate estimates of the pseudoskin factor regardless of the location of the open interval.This work also extends single-layer results of interest in well testing to the multilayer case and shows that if sufficient data are available, the results of this work can be used to prepare a complete analysis of well testing pressure data obtained at a restricted-entry well.

  13. Using a new intelligent well technology completions strategy to increase thermal EOR recoveries-SAGD field trial

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, Joel; Bedry, Mark [Halliburton (Canada)

    2011-07-01

    In the bitumen and heavy oil industry, thermal recovery methods are often used to enhance oil recovery. At the moment, traditional steam assisted gravity drainage (SAGD) systems are being used but they present some issues: poor injectability, steam breakthrough and lack of conformance. This paper presents a new completions strategy addressing the problems of steam injection and production conformance. This strategy relies on an intelligent completion technology incorporating interval control valves, well segmentation and instrumentation. A field test of this technology is being done in an SAGD system in the Orion field of Northern Alberta. Up to now results have shown the new completions strategy to be successful with an improvement in injectivity of 35%. This paper presented a new completions strategy which has been successfully implemented in a field trial and could improve the steam oil ratio and recovery in thermal enhanced oil recovery projects.

  14. 75 FR 18545 - MMS Information Collection Activity: 1010-0067, Oil and Gas Well-Completion Operations, Extension...

    Science.gov (United States)

    2010-04-12

    ... Minerals Management Service MMS Information Collection Activity: 1010-0067, Oil and Gas Well- Completion.... ACTION: Notice of extension of an information collection (1010-0067). SUMMARY: To comply with the...; 381 Elden Street, MS-4024; Herndon, Virginia 20170-4817. Please reference ICR 1010-0067 in...

  15. 75 FR 68817 - BOEMRE Information Collection Activity: 1010-0067, Oil and Gas Well-Completion Operations...

    Science.gov (United States)

    2010-11-09

    ... rulemaking that became effective June 3, 2010 (75 FR 23582), and addresses the procedures and requirements... 12, 2010, we published a Federal Register notice (75 FR 18545) announcing that we would submit this...: 1010-0067, Oil and Gas Well-Completion Operations, Extension of a Collection; Submitted for Office...

  16. Drilling, completion, stimulation, and testing of Hardy HW{number_sign}1 well, Putnam County, West Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Carden, R.S.; Locke, C.D.; Salamy, S.P.

    1992-03-01

    This report discusses the detailed field operations in drilling, logging, casing, completing, stimulating and testing the Hardy HW No. l well located in Union District, Putnam County, West Virginia. The project was designed and managed by BDM in cooperation with Cabot Oil and Gas Corporation. The well was spudded on November 29, 1989 and was completed at a total measured depth of 6406 feet on December 29, 1989. The well was drilled on an average azimuth of 335 degrees with a total horizontal displacement of 2618 feet. Approximately 1035 feet of the well had an inclination higher than 86 degrees, while 2212 feet of the well had an inclination greater than 62 degrees. The well was partitioned into five zones for stimulation purposes. Four zones were stimulated during three stimulation operations (Zones 3 and 4 were stimulated together). Zone 1 stimulation was a successful foam frac while the stimulations on Zones 2, 3-4 were Partially successful. Initial gas production rates were 4.5 times greater than the natural production rate. After 21 months, gas produced from the BDM/Cabot well has declined at a rate about one-half that of a conventional vertical well in the area. This horizontal well is projected to produce 475 million cubic feet of gas over a 30-year period.

  17. Drilling, completion, stimulation, and testing of Hardy HW[number sign]1 well, Putnam County, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Carden, R.S.; Locke, C.D.; Salamy, S.P.

    1992-03-01

    This report discusses the detailed field operations in drilling, logging, casing, completing, stimulating and testing the Hardy HW No. l well located in Union District, Putnam County, West Virginia. The project was designed and managed by BDM in cooperation with Cabot Oil and Gas Corporation. The well was spudded on November 29, 1989 and was completed at a total measured depth of 6406 feet on December 29, 1989. The well was drilled on an average azimuth of 335 degrees with a total horizontal displacement of 2618 feet. Approximately 1035 feet of the well had an inclination higher than 86 degrees, while 2212 feet of the well had an inclination greater than 62 degrees. The well was partitioned into five zones for stimulation purposes. Four zones were stimulated during three stimulation operations (Zones 3 and 4 were stimulated together). Zone 1 stimulation was a successful foam frac while the stimulations on Zones 2, 3-4 were Partially successful. Initial gas production rates were 4.5 times greater than the natural production rate. After 21 months, gas produced from the BDM/Cabot well has declined at a rate about one-half that of a conventional vertical well in the area. This horizontal well is projected to produce 475 million cubic feet of gas over a 30-year period.

  18. Key technologies for well drilling and completion in ultra-deep sour gas reservoirs, Yuanba Gasfield, Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Jiaxiang Xia

    2016-12-01

    Full Text Available The Yuanba Gasfield is a large gas field discovered by Sinopec in the Sichuan Basin in recent years, and another main exploration area for natural gas reserves and production increase after the Puguang Gasfield. The ultra-deep sour gas reservoir in the Yuanba Gasfield is characterized by complicated geologic structure, deep reservoirs and complex drilled formation, especially in the continental deep strata which are highly abrasive with low ROP (rate of penetration and long drilling period. After many years of drilling practice and technical research, the following six key drilling and completion technologies for this type reservoir are established by introducing new tools and technologies, developing specialized drill bits and optimizing drilling design. They are: casing program optimization technology for ROP increasing and safe well completion; gas drilling technology for shallow continental strata and high-efficiency drilling technology for deep high-abrasion continental strata; drilling fluid support technologies of gas–liquid conversion, ultra-deep highly-deviated wells and horizontal-well lubrication and drag reduction, hole stability control and sour gas contamination prevention; well cementing technologies for gas medium, deep-well long cementing intervals and ultra-high pressure small space; horizontal-well trajectory control technologies for measuring instrument, downhole motor optimization and bottom hole assembly design; and liner completion modes and completion string optimization technologies suitable for this gas reservoir. Field application shows that these key technologies are contributive to ROP increase and efficiency improvement of 7000 m deep horizontal wells and to significant operational cycle shortening.

  19. Drilling, completion, stimulation, and testing of BDM/CNGD Well 3997, Lee District, Calhoun County, West Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Carden, R.S.; Salamy, S.P.; Locke, C.D.; Johnson, H.R.

    1992-03-01

    This report discusses the detailed field operations in drilling, casing, completing, and stimulating the Hunter Bennett No. 3997 well located in Lee District, Calhoun County West Virginia. The project was designed and managed by BDM in cooperation with CNG Development Company. The well was spudded on November 9, 1990, and drilling was completed on December 14, 1990. The well was drilled on an average asmuth of 312 degrees with a total horizontal displacement of 2459 feet. The well was turned to a 90 degree inclination from the vertical over a measured course length of 1216 feet. Approximately 1381 feet of the well had an inclination higher than 86 degrees, while 2179 feet had an inclination greater than 62 degrees. The well was partitioned into five zones for stimulation purposes. Each zone is a little more than 300 feet long. The well was stimulated with nitrogen gas in zones one and two. Early production results are encouraging. The BDM/CNGD horizontal well averaged 147 mcfd of gas over the first week of production and, in week five, began to produce oil at a rate of about 2 bbl/day.

  20. Drilling, completion, stimulation, and testing of BDM/CNGD Well 3997, Lee District, Calhoun County, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Carden, R.S.; Salamy, S.P.; Locke, C.D.; Johnson, H.R.

    1992-03-01

    This report discusses the detailed field operations in drilling, casing, completing, and stimulating the Hunter Bennett No. 3997 well located in Lee District, Calhoun County West Virginia. The project was designed and managed by BDM in cooperation with CNG Development Company. The well was spudded on November 9, 1990, and drilling was completed on December 14, 1990. The well was drilled on an average asmuth of 312 degrees with a total horizontal displacement of 2459 feet. The well was turned to a 90 degree inclination from the vertical over a measured course length of 1216 feet. Approximately 1381 feet of the well had an inclination higher than 86 degrees, while 2179 feet had an inclination greater than 62 degrees. The well was partitioned into five zones for stimulation purposes. Each zone is a little more than 300 feet long. The well was stimulated with nitrogen gas in zones one and two. Early production results are encouraging. The BDM/CNGD horizontal well averaged 147 mcfd of gas over the first week of production and, in week five, began to produce oil at a rate of about 2 bbl/day.

  1. Completion Report for Well ER-3-3 Corrective Action Unit 97: Yucca Flat/Climax Mine, Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeffrey [Navarro, Las Vegas, NV (United States); Rehfeldt, Ken [Navarro, Las Vegas, NV (United States)

    2017-04-01

    Well ER-3-3 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area (UGTA) Activity. The well was drilled and completed from February 21 to March 15, 2016, as part of the Corrective Action Investigation Plan (CAIP) for Yucca Flat/Climax Mine Corrective Action Unit (CAU) 97. The primary purpose of the well was to collect hydrogeologic data to assist in validating concepts of the flow system within the Yucca Flat/Climax Mine CAU, and to test for potential radionuclides in groundwater from the WAGTAIL (U3an) underground test.

  2. Testing geopressured geothermal reservoirs in existing wells. Final report P. R. Girouard Well No. 1, Lafayette Parish, Louisiana. Volume I. Completion and testing

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The P.R. Girouard No. 1 Well, located approximately 10 miles southeast of Lafayette, Louisiana, was the fourth successful test of a geopressured-geothermal aquifer under the Wells of Opportunity program. The well was tested through 3-1/2 inch tubing set on a packer at 14,570 feet without major problems. The geological section tested was the Oligocene Marginulina Texana No. 1 sand of upper Frio age. The interval tested was from 14,744 to 14,819 feet. Produced water was piped down a disposal well perforated from 2870 to 3000 feet in a Miocene saltwater sand. Four flow tests were conducted for sustained production rates of approximately 4000 BWPD to approximately 15,000 BWPD. The highest achieved, during a fifth short test, was 18,460 BWPD. The test equipment was capable of handling higher rates. The gas-to-water ratio was relatively uniform at approximately 40 SCF/bbl. The heating value of the gas is 970 Btu/SCF. The reservoir tests show that is is doubtful that this well would sustain production rates over 10,000 BWPD for any lengthy period from the sand zone in which it was completed. This limited flow capacity is due to the well's poor location in the reservoir and is not a result of any production deficiencies of the Marginulina Texana sand.

  3. Simultaneous sand control and liner cement system: keeping well productivity by optimizing drilling and completion operations in mature fields

    Energy Technology Data Exchange (ETDEWEB)

    Sa, Andrea Nicolino de; Silva, Dayana Nunes e; Calderon, Agostinho [Petroleo Brasileiro S.A. (PETROBRAS), Rio de janeiro, RJ (Brazil)

    2012-07-01

    The need to reduce oil extraction costs by increasing the recovery factor in mature fields unconsolidated sandstone reservoirs motivated the development of drilling and completion techniques that integrate the various interfaces of engineering the well, resulting in a final well configuration that provides maximum oil production at a lower cost. Due to the continued growth of drilling and completion of new wells or deviation of old wells in the design of mesh density field with an advanced degree of exploitation, PETROBRAS took the challenge to seek options for projects well, in order to maintain productivity and reduce their construction time, with the optimization of drilling and sand control systems. To achieve these goals, PETROBRAS developed the SCARS - Simultaneous Sand Control and Liner Cementing System, a pioneer technique in the global oil industry, which consists of a one trip sequence of operations in which sand control screens and liner are installed followed by the open hole gravel pack operation performed with the alpha and beta waves deposition technique, using a non aqueous system as a carrier fluid. The sequence is completed by liner cementing in the same trip. The great success of this project was based on the definition of a specific application scenario and demands allowing optimization of the system. This project started with the development of a non aqueous system as a gravel pack carrier fluid in order to perform an open hole gravel pack with the alpha/beta wave deposition technique along with the development and optimization of SCARS procedures. This article details the planning and execution phases of this project and also presents a broad description of the technical aspects. (author)

  4. A strategy for delineating the area of ground-water contribution to wells completed in fractured bedrock aquifers in Pennsylvania

    Science.gov (United States)

    Risser, D.W.; Barton, G.J.

    1995-01-01

    Delineating a contributing area to a well completed in a fractured bedrock aquifer in Pennsylvania is difficult because the hydrogeologic characteristics of fractured rocks are extremely complex. Because of this complexity, a single method or technique to delineate a contributing area will not be applicable for all wells completed in fractured-bedrock aquifers. Therefore, a strategy for refining the understanding of boundary conditions and major heterogeneities that control ground-water flow and sources of water to a supply well is suggested. The strategy is based on developing and refining a conceptual model for the sources of water to the well. Specifically, the strategy begins with an initial conceptual model of the ground-water-flow system, then requires the collection of hydrogeologic information to refine the conceptual model in a stepwise manner from one or more of sic categories: (1) hydrogeologic mapping, (2) water-level and streamflow measurements, (3) geochemistry, (4) geophysics and borehole flowmetering, (5) aquifer testing, and (6) tracer testing. During the refinement process, the applicability of treating the fratured-rock aquifer as a hydrologic continuum is evaluated, and the contributing area is delineated. Choice of the method used to delineate the contributing area is less important than insuring that the method is consistent with the refined conceptual model. By use of such a strategy, the improved understanding of the ground-water-flow system will lead to a technically defensible delineation of the contributing area.

  5. Contamination of wells completed in the Roubidoux aquifer by abandoned zinc and lead mines, Ottawa County, Oklahoma

    Science.gov (United States)

    Christenson, Scott C.

    1995-01-01

    The Roubidoux aquifer in Ottawa County Oklahoma is used extensively as a source of water for public supplies, commerce, industry, and rural water districts. Water in the Roubidoux aquifer in eastern Ottawa County has relatively low dissolved-solids concentrations (less than 200 mg/L) with calcium, magnesium, and bicarbonate as the major ions. The Boone Formation is stratigraphically above the Roubidoux aquifer and is the host rock for zinc and lead sulfide ores, with the richest deposits located in the vicinity of the City of Picher. Mining in what became known as the Picher mining district began in the early 1900's and continued until about 1970. The water in the abandoned zinc and lead mines contains high concentrations of calcium, magnesium, bicarbonate, sulfate, fluoride, cadmium, copper, iron, lead, manganese, nickel, and zinc. Water from the abandoned mines is a potential source of contamination to the Roubidoux aquifer and to wells completed in the Roubidoux aquifer. Water samples were collected from wells completed in the Roubidoux aquifer in the Picher mining district and from wells outside the mining district to determine if 10 public supply wells in the mining district are contaminated. The chemical analyses indicate that at least 7 of the 10 public supply wells in the Picher mining district are contaminated by mine water. Application of the Mann-Whitney test indicated that the concentrations of some chemical constituents that are indicators of mine-water contamination are different in water samples from wells in the mining area as compared to wells outside the mining area. Application of the Wilcoxon signed-rank test showed that the concentrations of some chemical constituents that are indicators of mine-water contamination were higher in current (1992-93) data than in historic (1981-83) data, except for pH, which was lower in current than in historic data. pH and sulfate, alkalinity, bicarbonate, magnesium, iron, and tritium concentrations consistently

  6. Alternative cementing materials for completion of deep, hot oil wells; Sementeringsmateriale med regulert herdetid, for anvendelse i dype, varme oljebroenner

    Energy Technology Data Exchange (ETDEWEB)

    Justnes, H.; Dahl-Joergensen, E.

    1995-03-06

    The invention deals with alternative cementing materials for use in oil well completion. A cementing material with controlled curing time, for use in the primary secondary cementing of deep hot oil wells with a static background temperature in the range of 120 to 200{sup o}C, comprising a resin consisting of ortho-, meta- and/or para-diallyl phthalates and/or prepolymers and/or oligomers thereof; a curing agent in the form of a dissolved organic peroxide generating free radicals, and an inhibitor for stabilizing free radicals so as to obtain the required open time for pumping the resin in place, and optionally the following, one or more heavy weight filler(s) for controlling the density of the cement; extender materials controlling the consistency and materials compensating inherent shrinkage. 6 figs.

  7. Complete Fiber/Copper Cable Solution for Long-Term Temperature and Pressure Measurement in Supercritical Reservoirs and EGS Wells

    Energy Technology Data Exchange (ETDEWEB)

    Pastouret, Alan [Draka Cableteq USA, Inc., North Dighton, MA (United States); Gooijer, Frans [Draka Cableteq USA, Inc., North Dighton, MA (United States); Overton, Bob [Draka Cableteq USA, Inc., North Dighton, MA (United States); Jonker, Jan [Draka Cableteq USA, Inc., North Dighton, MA (United States); Curley, Jim [Draka Cableteq USA, Inc., North Dighton, MA (United States); Constantine, Walter [Draka Cableteq USA, Inc., North Dighton, MA (United States); Waterman, Kendall Miller [Draka Cableteq USA, Inc., North Dighton, MA (United States)

    2015-11-13

    High Temperature insulated wire and optical fiber cable is a key enabling technology for the Geothermal Technologies Program (GTP). Without insulated electrical wires and optical fiber, downhole temperature and pressure sensors, flow meters and gauges cannot communicate with the surface. Unfortunately, there are currently no insulated electrical wire or fiber cable constructions capable of surviving for extended periods of deployment in a geothermal well (240-325°C) or supercritical (374°C) reservoir. This has severely hindered engineered reservoir creation, management and utilization, as hot zones and cool water intrusions cannot be understood over time. The lack of a insulated electrical wire and fiber cable solution is a fundamental limitation to the viability of this energy source. The High Temperature Downhole Tools target specification is development of tools and sensors for logging and monitoring wellbore conditions at depths of up to 10,000 meters and temperatures up to 374oC. It well recognized in the industry that no current electronic or fiber cable can be successfully deployed in a well and function successfully for more a few days at temperatures over 240oC. The goal of this project was to raise this performance level significantly. Prysmian Group’s objective in this project was to develop a complete, multi-purpose cable solution for long-term deployment in geothermal wells/reservoirs that can be used with the widest variety of sensors. In particular, the overall project objective was to produce a manufacturable cable design that can perform without serious degradation: • At temperatures up to 374°C; • At pressures up to 220 bar; • In a hydrogen-rich environment; and • For the life of the well (> 5 years). This cable incorporates: • Specialty optical fibers, with specific glass chemistry and high temperature and pressure protective coatings for data communication and distributed temperature and pressure sensing, and • High

  8. Completion Report for Well ER-2-2 Corrective Action Unit 97: Yucca Flat/Climax Mine

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeffrey [Navarro, Las Vegas, NV (United States); Rehfeldt, Ken [Navarro, Las Vegas, NV (United States)

    2017-01-01

    Well ER-2-2 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area (UGTA) Activity. The well was drilled from January 17 to February 8, 2016, as part of the Corrective Action Investigation Plan (CAIP) for Corrective Action Unit 97: Yucca Flat/Climax Mine, Nevada Test Site, Nevada. The primary purpose of the well was to collect hydrogeologic data to evaluate uncertainty in the flow and transport conceptual model and its contamination boundary forecasts, and to detect radionuclides in groundwater from the CALABASH (U2av) underground test. Well ER-2-2 was not completed as planned due to borehole stability problems. As completed, the well includes a piezometer (p1) to 582 meters (m) (1,909 feet [ft]) below ground surface (bgs) installed in the Timber Mountain lower vitric-tuff aquifer (TMLVTA) and a 12.25-inch (in.) diameter open borehole to 836 m (2,743 ft) bgs in the Lower tuff confining unit (LTCU). A 13.375-in. diameter carbon-steel casing is installed from the surface to a depth of 607 m (1,990 ft) bgs. Data collected during borehole construction include composite drill cutting samples collected every 3.0 m (10 ft), geophysical logs to a depth of 672.4 m (2,206 ft) bgs, water-quality measurements (including tritium), water-level measurements, and slug test data. The well penetrated 384.05 m (1,260 ft) of Quaternary alluvium, 541.93 m (1,778 ft) of Tertiary Volcanics (Tv) rocks, and 127.71 m (419 ft) of Paleozoic carbonates. The stratigraphy and lithology were generally as expected. However, several of the stratigraphic units were significantly thicker then predicted—principally, the Tunnel formation (Tn), which had been predicted to be 30 m (100 ft) thick; the actual thickness of this unit was 268.22 m (880 ft). Fluid depths were measured in the borehole during drilling as follows: (1) in the piezometer (p1) at 552.15 m (1,811.53 ft) bgs and (2) in the main casing (m1) at

  9. Completion Report for Well ER-EC-14, Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-03-05

    Well ER-EC-14 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Management Operations Underground Test Area (UGTA) Activity at the Nevada National Security Site (NNSS; formerly Nevada Test Site), Nye County, Nevada. The well was drilled in September and October 2012, as part of the Central and Western Pahute Mesa Corrective Action Unit Phase II drilling program. The primary purpose of the well was to provide detailed hydrogeologic information for the Fortymile Canyon composite hydrostratigraphic unit in the Timber Mountain moat area, within the Timber Mountain caldera complex, that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic framework model. The main 55.9-centimeter (cm) hole was drilled to a total depth of 325.5 meters (m) and cased with 40.6-cm casing to 308.1 m. The hole diameter was then decreased to 37.5 cm, and drilling continued to a total depth of 724.8 m. The completion casing string, set to the depth of 690.9 m, consists of 16.8-cm stainless-steel casing hanging from 19.4-cm carbon-steel casing. The stainless-steel casing has two slotted intervals open to the Rainier Mesa Tuff. Two piezometer strings were installed in Well ER-EC-14. Both piezometer strings, each with one slotted interval, consist of 6.0-cm carbon-steel tubing at the surface, then cross over to 7.3-cm stainless-steel tubing just above the water table. The shallow piezometer string was landed at 507.8 m, and the deep piezometer string was landed at 688.6 m. Both piezometer strings are set to monitor groundwater within moderately to densely welded Rainier Mesa Tuff. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, water quality (including tritium and other radionuclides) measurements, and water level measurements. The well penetrated 15.2 m of alluvium and

  10. Completion Report for Well ER-20-7: Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2010-04-28

    Well ER-20-7 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. The well was drilled in June 2009 as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to further investigate migration of radionuclides from the nearby, up-gradient TYBO and BENHAM underground nuclear tests, which originally was discovered at Well Cluster ER-20-5. This well also provided detailed hydrogeologic information in the Tertiary volcanic section that will reduce uncertainties within the Pahute Mesa-Oasis Valley hydrostratigraphic framework model. The main 44.45-centimeter hole was drilled to a depth of 681.8 meters and cased with 33.97-centimeter casing to 671.7 meters. The hole diameter was then decreased to 31.12 centimeters, and the well was drilled to total depth of 894.9 meters. The completion string, set to the depth of 890.0 meters, consists of 14.13-centimeter stainless-steel casing hanging from 19.37-centimeter carbon-steel casing. The 14.13-centimeter stainless-steel casing has one continuous slotted interval open to the Topopah Spring aquifer. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 meters, sidewall core samples from 20 depth intervals, various geophysical logs, water quality (primarily tritium) measurements, and water level measurements. The well penetrated 894.9 meters of Tertiary volcanic rock, including two saturated welded-tuff aquifers. A fluid level measurement was obtained during open-hole geophysical well logging for the upper, Tiva Canyon, aquifer at the depth of 615.7 meters on June 19, 2009. The fluid level measured in the open hole on June 27, 2009,after the total depth was reached and the upper aquifer was cased off, was also at the depth of 615.7 meters. Preliminary field measurements indicated 1

  11. Completion Report for the Well ER-6-2 Site Corrective Action Unit 97: Yucca Flat - Climax Mine

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2008-03-01

    Well ER-6-2 and its satellite hole, Well ER-6-2 No.1, were drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. Well ER-6-2 was drilled in two stages in 1993 and 1994; the satellite hole, Well ER-6-2 No.1 was drilled nearby in 1993 but was abandoned. The wells were drilled as part of a hydrogeologic investigation program for the Yucca Flat-Climax Mine Corrective Action Unit Number 97, in the northeastern portion of the Nevada Test Site. The wells are located in Yucca Flat, within Area 6 of the Nevada Test Site. The wells provided information regarding the radiological and hydrogeological environment in a potentially down-gradient position from tests conducted in northern and central Yucca Flat. Construction of Well ER-6-2 began with a 1.2-meter-diameter surface conductor hole, which was drilled and cased off to a depth of 30.8 meters below the surface. A 50.8-centimeter diameter surface hole was then rotary drilled to the depth of 578.5 meters and cased off to the depth of 530.4 meters. The hole diameter was then reduced to 27.0 centimeters, and the borehole was advanced to a temporary depth of 611.4 meters. The borehole was conventionally cored to a total depth of 1,045 meters with a diameter of 14.0 centimeters. Borehole sloughing required cementing and re-drilling of several zones. The open-hole completion accesses the lower carbonate aquifer, the CP thrust fault, and the upper clastic confining unit. A fluid level depth of 543.2 meters was most recently measured in the open borehole in September 2007. No radionuclides were encountered during drilling. The satellite hole Well ER-6-2 No.1 was drilled approximately 15.2 meters north of Well ER-6-2 on the same drill pad. This was planned to be used as an observation well during future hydrologic testing at Well ER-6-2; however, the satellite hole was abandoned at

  12. Completion Report for Well ER-2-2 Corrective Action Unit 97: Yucca Flat/Climax Mine, Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeffrey [Navarro, Las Vegas, NV (United States)

    2017-05-01

    Well ER-2-2 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area (UGTA) Activity. The well was drilled from January 17 to February 8, 2016, as part of the Corrective Action Investigation Plan (CAIP) for Corrective Action Unit 97: Yucca Flat/Climax Mine, Nevada Test Site, Nevada. The primary purpose of the well was to collect hydrogeologic data to evaluate uncertainty in the flow and transport conceptual model and its contamination boundary forecasts, and to detect radionuclides in groundwater from the CALABASH (U2av) underground test. Well ER-2-2 was not completed as planned due to borehole stability problems. As completed, the well includes a piezometer (p1) to 582 meters (m) (1,909 feet [ft]) below ground surface (bgs) installed in the Timber Mountain lower vitric-tuff aquifer (TMLVTA) and a 12.25-inch (in.) diameter open borehole to 836 m (2,743 ft) bgs in the Lower tuff confining unit (LTCU). A 13.375-in. diameter carbon-steel casing is installed from the surface to a depth of 607 m (1,990 ft) bgs. Data collected during borehole construction include composite drill cutting samples collected every 3.0 m (10 ft), geophysical logs to a depth of 672.4 m (2,206 ft) bgs, water-quality measurements (including tritium), water-level measurements, and slug test data. The well penetrated 384.05 m (1,260 ft) of Quaternary alluvium, 541.93 m (1,778 ft) of Tertiary Volcanics (Tv) rocks, and 127.71 m (419 ft) of Paleozoic carbonates. The stratigraphy and lithology were generally as expected. However, several of the stratigraphic units were significantly thicker then predicted—principally, the Tunnel formation (Tn), which had been predicted to be 30 m (100 ft) thick; the actual thickness of this unit was 268.22 m (880 ft). Fluid depths were measured in the borehole during drilling as follows: (1) in the piezometer (p1) at 552.15 m (1,811.53 ft) bgs and (2) in the main casing (m1) at

  13. Completion Report for Well ER-20-12: Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeff [Navarro-Intera, LLC (N-I), Las Vegas, NV (United States)

    2016-08-01

    Well ER-20-12 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area Activity. The well was drilled from October 2015 to January 2016 as an addition to the Central and Western Pahute Mesa corrective action units 101 and 102 the Phase II drilling program. Well ER-20-12 was identified based on recommendations of the Pahute Mesa Guidance Team as a result of anomalous tritium detections in groundwater samples collected from Well PM-3 in 2011 and 2013. The primary purpose of the well was to provide information on the hydrogeology in the area downgradient of select underground tests on Western Pahute Mesa and define hydraulic properties in the saturated Tertiary volcanic rocks. The main 46.99-centimeter (cm) (18.5-inch [in.]) borehole was drilled to a depth of 765.14 meters (m) (2,510.3 ft) and the hole opened to 66.04 cm (26 in.); followed by the 50.80-cm (20-in.) surface casing, which was installed and sealed with cement; and a piezometer (p4) was set in the Timber Mountain welded-tuff aquifer (TMWTA) between the casing and the open borehole. The borehole was continued with a 46.99-cm (18.5-in.) drill bit to a depth of 1,326.53 m (4,352.16 ft), and an intermediate 24.44-cm (9.625-in.) casing was installed and sealed to 1,188.72 m (3,900.00 ft) A piezometer (p3) was installed across the Calico Hills zeolitic composite unit (CHZCM) (lava-flow aquifer [LFA]) in the annulus of the open borehole. Two additional piezometers were installed and completed between the intermediate casing and the borehole wall, one (p2) in the CHZCM and one (p1) in the Belted Range aquifer (BRA). The piezometers are set to monitor groundwater properties in the completed intervals. The borehole was continued with a 21.59-cm (8.5-in.) drill bit to a total depth of 1,384.80 m (4,543.33 ft), and the main completion 13.97-cm (5.5-in.) casing was installed in the open borehole across the Pre-Belted Range

  14. Completion Report for Well ER-20-12: Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeff [Navarro-Intera, LLC (N-I), Las Vegas, NV (United States)

    2016-08-01

    Well ER-20-12 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area Activity. The well was drilled from October 2015 to January 2016 as an addition to the Central and Western Pahute Mesa corrective action units 101 and 102 the Phase II drilling program. Well ER-20-12 was identified based on recommendations of the Pahute Mesa Guidance Team as a result of anomalous tritium detections in groundwater samples collected from Well PM-3 in 2011 and 2013. The primary purpose of the well was to provide information on the hydrogeology in the area downgradient of select underground tests on Western Pahute Mesa and define hydraulic properties in the saturated Tertiary volcanic rocks. The main 46.99-centimeter (cm) (18.5-inch [in.]) borehole was drilled to a depth of 765.14 meters (m) (2,510.3 ft) and the hole opened to 66.04 cm (26 in.); followed by the 50.80-cm (20-in.) surface casing, which was installed and sealed with cement; and a piezometer (p4) was set in the Timber Mountain welded-tuff aquifer (TMWTA) between the casing and the open borehole. The borehole was continued with a 46.99-cm (18.5-in.) drill bit to a depth of 1,326.53 m (4,352.16 ft), and an intermediate 24.44-cm (9.625-in.) casing was installed and sealed to 1,188.72 m (3,900.00 ft) A piezometer (p3) was installed across the Calico Hills zeolitic composite unit (CHZCM) (lava-flow aquifer [LFA]) in the annulus of the open borehole. Two additional piezometers were installed and completed between the intermediate casing and the borehole wall, one (p2) in the CHZCM and one (p1) in the Belted Range aquifer (BRA). The piezometers are set to monitor groundwater properties in the completed intervals. The borehole was continued with a 21.59-cm (8.5-in.) drill bit to a total depth of 1,384.80 m (4,543.33 ft), and the main completion 13.97-cm (5.5-in.) casing was installed in the open borehole across the Pre-Belted Range

  15. Completion Report for Well ER-4-1 Corrective Action Unit 97: Yucca Flat/Climax Mine, Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Wurtz, Jeffrey [Navarro, Las Vegas, NV (United States); Rehfeldt, Ken [Navarro, Las Vegas, NV (United States)

    2017-07-01

    Well ER-4-1 was drilled for the U.S. Department of Energy, Nevada National Security Administration Nevada Field Office in support of the Underground Test Area (UGTA) Activity. The well was drilled and completed from March 23 to April 13, 2016, as part of the Corrective Action Investigation Plan (CAIP) for Yucca Flat/Climax Mine Corrective Action Unit (CAU) 97. The primary purpose of the well was to collect hydrogeologic data to assist in validating concepts of the groundwater flow system within the Yucca Flat/Climax Mine CAU, and to test for potential radionuclides in groundwater from the STRAIT (U4a) underground test. The completed well includes one piezometer (p1), to a depth of 663.16 meters (m) (2,175.71 feet [ft]) below ground surface (bgs) and open from the Alluvial aquifer (AA3) to the Oak Spring Butte confining unit (OSBCU) hydrostratigraphic units; and a main completion (m1), which includes 6.625-inch (in.) casing with slotted interval (m1) installed to 906.80 m (2,975.05 ft) bgs in the Lower carbonate aquifer (LCA). A 13.375-in. diameter surface casing was installed from the surface to a depth of 809.00 m (2,654.21 ft) bgs. Well ER-4-1 experienced a number of technical issues during drilling, including borehole instability and sloughing conditions. An intermediate, 10.75-in./9.625-in. casing string was installed to 856.94 m (2,811.48 ft) bgs to control these issues. Borehole stability and erosion problems appear to be associated with the Tunnel Formation (Tn) and the Older tunnel beds (Ton). Overall efforts to stabilize the borehole were successful. Data collected during borehole construction include composite drill cutting samples collected every 3.0 m (10 ft), a partial suite of geophysical logs to a maximum depth of 766.57 m (2,515 ft) bgs, water-quality measurements (including tritium), water-level measurements, and two depth-discrete bailer samples collected at 538.89 m and 646.18 m (1,768 ft and 2,120 ft) bgs respectively. The well penetrated 187

  16. Testing geopressured geothermal reservoirs in existing wells. Saldana well No. 2, Zapata County, Texas. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-07

    The Saldana Well No. 2, approximately 35 miles Southeast of the city of Laredo, Texas, was the sixth successful test of a geopressured-geothermal aquifer under the DOE Wells of Opportunity Program. The well was tested through the annulus between 7-inch casing and 2-3/8 inch tubing. The interval tested was from 9745 to 9820 feet. The geological section was the 1st Hinnant Sand, an upper member of the Wilcox Group. Produced water was injected into the Saldana Well No. 1, which was also acquired from Riddle Oil Company and converted to a disposal well. A Miocene salt water sand was perforated from 3005 to 3100 feet for disposal. One pressure drawdown flow test and one pressure buildup test were conducted during a 10-day period. A total of 9328 barrels of water was produced. The highest sustained flow rate was 1950 BWPD.

  17. Completion Report for Well ER-EC-11 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2010-12-01

    Well ER-EC-11 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly Nevada Test Site), Nye County, Nevada. The well was drilled in September and October 2009 as part of the Pahute Mesa Phase II drilling program. A main objective was to investigate radionuclide migration down-gradient from Well Cluster ER-20-5 and Well ER-20-7 and across the northern Timber Mountain moat structural zone into the area referred to as the Bench, between Pahute Mesa and the Timber Mountain caldera complex. A secondary purpose of the well was to provide detailed hydrogeologic information for the shallow- to intermediate-depth Tertiary volcanic section in the Bench area. This well also provided detailed hydrogeologic information in the Tertiary volcanic section to reduce uncertainties within the Pahute Mesa-Oasis Valley hydrostratigraphic framework model (Bechtel Nevada, 2002). The main 52.1-centimeter hole was drilled to a depth of 507.5 meters and then opened to a diameter of 66.0 centimeters. It was cased with 50.8-centimeter casing to 504.9 meters. The hole diameter was then decreased to 47.0 centimeters, and drilling continued to a total depth of 979.3 meters. It was then cased with 34.0-centimeter casing set at 965.5 meters. The hole diameter was then decreased to 31.1 centimeters and the borehole was drilled to a total depth of 1,264.3 meters. The completion casing string, set to the depth of 1,262.5 meters, consists of 19.4-centimeter stainless-steel casing hanging from 19.4-centimeter carbon-steel casing. The stainless-steel casing has two slotted intervals open to the Tiva Canyon and Topopah Spring aquifers. Four piezometer strings were installed in Well ER-EC-11. A string of carbon-steel 6.0-centimeter tubing with one slotted interval was inserted outside the 50.8-centimeter casing, within the 66.0-centimeter borehole

  18. Impact to Underground Sources of Drinking Water and Domestic Wells from Production Well Stimulation and Completion Practices in the Pavillion, Wyoming, Field.

    Science.gov (United States)

    DiGiulio, Dominic C; Jackson, Robert B

    2016-04-19

    A comprehensive analysis of all publicly available data and reports was conducted to evaluate impact to Underground Sources of Drinking Water (USDWs) as a result of acid stimulation and hydraulic fracturing in the Pavillion, WY, Field. Although injection of stimulation fluids into USDWs in the Pavillion Field was documented by EPA, potential impact to USDWs at the depths of stimulation as a result of this activity was not previously evaluated. Concentrations of major ions in produced water samples outside expected levels in the Wind River Formation, leakoff of stimulation fluids into formation media, and likely loss of zonal isolation during stimulation at several production wells, indicates that impact to USDWs has occurred. Detection of organic compounds used for well stimulation in samples from two monitoring wells installed by EPA, plus anomalies in major ion concentrations in water from one of these monitoring wells, provide additional evidence of impact to USDWs and indicate upward solute migration to depths of current groundwater use. Detections of diesel range organics and other organic compounds in domestic wells drilling mud and production fluids suggest impact to domestic wells as a result of legacy pit disposal practices.

  19. Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Willits, M.H.; McCoy, R.L.; Dobson, R.J.; Hartsock, J.H.

    1979-12-01

    The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests.

  20. Optimization of perforated completions for horizontal wells in a high-permeability, thin oil zone : case study : Hassi R'mel oil rim, Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Bourenane, M.; Recham, R. [Sonatrach Production PED, Hydra (Algeria); Tiab, D. [Oklahoma Univ., Norman, OK (United States)

    2004-07-01

    The efficiency and economics of horizontal wells has increased significantly in the past twenty years due to advances in drilling and completion technologies. State of the art applications require even better completion designs to optimize production, and ultimate recoverable reserves. Perforation is a common well completion method whose performance depends on the perforation length and its distribution along the horizontal well, perforation density, phasing, depth of penetration and diameter of the individual perforations. This study examined how reservoir heterogeneity and coning problems influence the performance of perforated completions for horizontal wells. Eight horizontal wells from the Hassi R'mel oil rim in Algeria were subjected to a petrophysical evaluation. A numerical solution was developed to optimize the perforated completion wells in heterogeneous reservoirs with large gas caps and an active aquifer. The most relevant reservoir parameters were examined through a sensitivity analysis. In particular, the performance of the HRZ-09 well was simulated because it was completed non-conventionally using an inverted high angle technique. Therefore, it was possible to study the effect of perforating the slated section of the well. The study showed that no extra recovery should be expected from the double perforation of this well. 22 refs., 3 tabs., 17 figs.

  1. Completion Report for Well ER-20-4 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-04-30

    Well ER-20-4 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site, Nye County, Nevada. The well was drilled in August and September 2010 as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to investigate the possibility of radionuclide transport from up-gradient underground nuclear tests conducted in central Pahute Mesa. This well also provided detailed hydrogeologic information in the Tertiary volcanic section that will help reduce uncertainties within the Pahute Mesa-Oasis Valley hydrostratigraphic framework model.

  2. Completion Report for Well ER-EC-15 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-05-31

    Well ER-EC-15 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly known as the Nevada Test Site), Nye County, Nevada. The well was drilled in October and November 2010, as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to provide detailed hydrogeologic information in the Tertiary volcanic section in the area between Pahute Mesa and the Timber Mountain caldera complex that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic model. In particular, the well was intended to help define the structural position and hydraulic parameters of volcanic aquifers potentially down-gradient from underground nuclear tests on Pahute Mesa. It may also be used as a long-term monitoring well.

  3. Completion Report for Well ER-EC-12 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-04-30

    Well ER-EC-12 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly known as the Nevada Test Site), Nye County, Nevada. The well was drilled in June and July 2010 as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to provide detailed hydrogeologic information in the Tertiary volcanic section in the area between Pahute Mesa and the Timber Mountain caldera complex that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic model. In particular, the well was intended to help define the structural position and hydraulic parameters for volcanic aquifers potentially down-gradient from historic underground nuclear tests on Pahute Mesa. It may also be used as a long-term monitoring well.

  4. Evaluation of methods for delineating areas that contribute water to wells completed in valley-fill aquifers in Pennsylvania

    Science.gov (United States)

    Risser, Dennis W.; Madden, Thomas M.

    1994-01-01

    Valley-fill aquifers in Pennsylvania are the source of drinking water for many wells in the glaciated parts of the State and along major river valleys. These aquifers area subject to contamination because of their shallow water-table depth and highly transmissive sediments. The possibility for contamination of water-supply wells in valley-fill aquifers can be minimized by excluding activities that could contaminate areas that contribute water to supply wells. An area that contributes water to a well is identified in this report as either an area of diversion, time-of-travel area, or contributing area. The area of diversion is a projection to land surface of the valley-fill aquifer volume through which water is diverted to a well and the time-of travel area is that fraction of the area of diversion through which water moves to the well in a specified time. The contributing area, the largest of three areas, includes the area of diversion but also incorporates bedrock uplands and other area that contribute water. Methods for delineating areas of diversion and contributing areas in valley-fill aquifers, described and compared in order of increasing complexity, include fixed radius, uniform flow, analytical, semianalytical, and numerical modeling. Delineated areas are considered approximations because the hydraulic properties and boundary conditions of the real ground-water system are simplified even in the most complex numerical methods. Successful application of any of these methods depends on the investigator's understanding of the hydrologic system in and near the well field, and the limitations of the method. The hydrologic system includes not only the valley-fill aquifer but also the regional surface-water and ground-water flow systems within which the valley is situated. As shown by numerical flow simulations of a well field in the valley-fill aquifer along Marsh Creek Valley near Asaph, Pa., water from upland bedrock sources can provide nearly all the water

  5. Completion Report for Well ER-EC-13 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-05-31

    Well ER-EC-13 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly Nevada Test Site), Nye County, Nevada. The well was drilled in October 2010 as part of the Pahute Mesa Phase II drilling program. A main objective was to provide detailed hydrogeologic information for the Fortymile Canyon composite unit hydrostratigraphic unit in the Timber Mountain moat area, within the Timber Mountain caldera complex, that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic framework model. This well may also be used as a long-term monitoring well.

  6. Completion Report for Well ER-12-4, Corrective Action Unit 99: Rainier Mesa - Shoshone Mountain (includes Errata Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Bechtel Nevada

    2006-05-01

    Well ER-12-4 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, in support of the Nevada Environmental Restoration Project at the Nevada Test Site, Nye County, Nevada. This well was drilled in May 2005, as part of a hydrogeologic investigation program for the Rainier Mesa-Shoshone Mountain Corrective Action Unit in the north-central portion of the Nevada Test Site. The well is located on Rainier/Aqueduct Mesa, northwest of Yucca Flat, within Area 12 of the Nevada Test Site. The well provided information regarding the radiological and physical environment near underground nuclear tests conducted in U12t Tunnel, information on the pre-Tertiary rocks in the area, and depth to the regional water table.

  7. Hot gas injection as an artificial lift system through a concentric tubing completion in a heavy oil well, Pilon field, Faja Petrolifera del Orinoco

    Energy Technology Data Exchange (ETDEWEB)

    Marfissi, S.; Lujan, A. [PDVSA EandP (Venezuela)

    2011-07-01

    The Pilon Field in the Morichal District, Venezuela is producing heavy oil with numerous gas lift wells. Some of these wells are now inactive due to casing damage. The purpose of this paper is to assess the benefits of using hot gas injection as an artificial lift system through a concentric tubing completion in such wells. A pilot test was conducted on a well presenting a low water cut and 12 degree API, an indirect fire heater was installed near the wells. Results showed that heat losses were minimized thanks to the concentric pipe completion. In addition hot gas injection resulted in an oil production increase of 57%. The hot gas injection method used with a concentric tubing completion was proved to be a good alternative to the use of diluent but an economic analysis is nevertheless recommended to determine the costs of installing heating equipment.

  8. Design aspects to consider during drilling and completion of wells of the pilot test in the in situ combustion project, Bare field

    Energy Technology Data Exchange (ETDEWEB)

    Vargas, D.; Garcia, J. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of). Exploration and Production; PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of). INTEVEP; Rodriguez, J.; Reverol, H. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of). Exploration and Production

    2009-07-01

    This paper discussed an in situ combustion demonstration project in Venezuela's Orinoco oil belt. Unconventional drilling and completion techniques are being implemented in order to assess well performance during different phases of the combustion process. Drilling, well completion and monitoring techniques planned in each of the project's wells were described. The purpose of the project is to minimize formation damage, reduce corrosion, and prevent formation sand production. Numerical analyses, sampling studies, and laboratory experiments will be conducted in order to define well arrangement and to select completion equipment. Thermocouples, pressure chambers, and fiber optics will be used to monitor temperature and pressure rates. To date, the analyses have demonstrated that the horizontal section of the production wells must be drilled with special directional and geo-navigational tools. The selected completion equipment must allow for the installation of high capacity mechanical pumping systems. Completion equipment must be capable of performing in high temperatures and with the corrosive gases produced during the combustion process. It was concluded that casings for the wells must be centralized in order to ensure good cement placement. Real time monitoring will be conducted to control firefloods. 3 refs., 1 tab., 8 figs.

  9. 2014 Well Completion Report for Corrective Action Unit 447 Project Shoal Area Churchill County, Nevada October 2015

    Energy Technology Data Exchange (ETDEWEB)

    Findlay, Rick [US Department of Energy, Washington, DC (United States).Office of Legacy Management

    2015-11-01

    This report summarizes the drilling program conducted by the U.S. Department of Energy (DOE) Office of Legacy Management at the Project Shoal Area (Shoal) Subsurface Corrective Action Unit 447 in Churchill County, Nevada. Shoal was the location of an underground nuclear test conducted on October 26, 1963, as part of the Vela Uniform program sponsored jointly by the U.S. Department of Defense and the U.S. Atomic Energy Commission (a predecessor to DOE). The test consisted of detonating a 12-kiloton nuclear device in granitic rock at a depth of approximately 1,211 feet (ft) below ground surface (bgs) (AEC 1964). The corrective action strategy for the site is focused on revising the site conceptual model and evaluating the adequacy of the monitoring well network at the site. Field activities associated with the project were conducted in accordance with the Federal Facility Agreement and Consent Order (FFACO 1996, as amended) and applicable Nevada Division of Environmental Protection (NDEP) policies and regulations.

  10. Effects of well placement and intelligent completions on SAGD in a full-field thermal-numerical model for Athabasca oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Akram, F. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Schlumberger Canada Ltd., Calgary, AB (Canada)

    2008-10-15

    This paper described a simulation study conducted to compare traditional and targeted, or smart, steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS) processes in ultra-heavy oil and bitumen reservoirs. Simulations were conducted using a Schlumberger Petrel and ECLIPSE thermal simulator. A reservoir model was used to determine steam requirements and production strategies in multiple well pairs. A fiscal model was used to evaluate SAGD project costs as well as to determine incremental costs for each completion strategy. Results of the study showed that while the efficient use of steam did not yield higher recovery rates, the expected value of the projects was improved. Process and operational controls were investigated. Strategies considered in the study included the smart completion strategy designed to target optimal steam injection areas and avoiding continuous zones of low permeability or shale barriers. Three completion designs were simulated and results were then run through the fiscal model in order to determine the financial impacts of the methods. Five year forecasts were generated for all completion designs. The smart design yielded a 5 per cent cost improvement over other designs, and yielded 442 MSTB less bitumen over the 5 year period. It was concluded that the smart design generated an incremental CAD $1.8 mm discounted cash flow at a capitalized cost of 10 per cent. 6 refs., 3 tabs., 11 figs.

  11. Comparison of predrilled liner/barefoot completions in horizontal sour gas wells; Vergleich von Predrilled Liner-/Barefoot-Komplettierungen in horizontalen Bohrungen im Stassfurtkarbonat

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.W. [Mobil Erdgas-Erdoel GmbH, Celle (Germany)

    1999-10-01

    When selecting the completion type of a horizontal well, all relevant aspects for production and reservoir engineering for safe and optimized long term production have to be considered. Mainly in sour gas wells with the need of corrosion resistent and expensive alloys, the technical/economic requirements for running a liner in the horizontal section are often be discussed. This paper compares the preinvestment of a 'Predrilled liner' with the costs of downhole operations which may become necessary in a 'barefoot completion'. These calculated 'risk savings' as a function of the horizontal length lead to a break-even-point which is supposed to assist the decision of running a liner in sour gas wells or not. (orig.) [German] Bei der Auswahl der Komplettierung einer Horizontalbohrung ist es erforderlich, alle produktions- und lagerstaettentechnischen Aspekte einfliessen zu lassen, um langfristig eine sichere und optimierte Foerderung zu gewaehrleisten. Gerade in Sauergasbohrungen mit den korrosionsresistenten, sehr teuren Werkstoffen wird die technisch/wirtschaftliche Notwendigkeit einer Verrohrung des horizontalen Aufschlusses haeufig diskutiert. In diesem Beitrag werden die Investition fuer einen 'Predrilled Liner' und Folgekosten von moeglichen Untertage-Arbeiten in einer 'Barefoot-Completion' in Sauergasbohrungen gegenuebergestellt und bewertet. Aus den errechneten 'Risked Savings' wird in Abhaengigkeit der Laenge des Traegeraufschlusses ein Break-Even-Point ermittelt, der eine Entscheidungshilfe fuer eine Traegerverrohrung im Stassfurtkarbonat darstellen soll. (orig.)

  12. Feasibility of Optimizing and Reserves from a Mature and Geological Complex Multiple Turbidite Offshore California Reservoir Through the Drilling and Completion of a Trilateral Horizontal Well.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The main objective of this project is to devise an effective re- development strategy to combat producibility problems related to the Repetto turbidite sequences of the Carpinteria Field. The lack of adequate reservoir characterization, high-water cut production, and scaling problems have in the past contributed to the field`s low productivity. To improve productivity and enhance recoverable reserves, the following specific goals were proposed: (1) Develop an integrated database of all existing data from work done by the former ownership group. (2) Expand reservoir drainage and reduce sand problems through horizontal well drilling and completion. (3) Operate and validate reservoir`s conceptual model by incorporating new data from the proposed trilateral well. (4) Transfer methodologies employed in geologic modeling and drilling multilateral wells to other operators with similar reservoirs. Pacific Operators Offshore, Inc. with the cooperation of its team members; the University of Southern California; Schlumberger; Baker Oil Tools; Halliburton Energy Services and Coombs and Associates undertook a comprehensive study to reexamine the reservoir conditions leading to the cent field conditions and to devise methodologies to mitigate the producibility problems. A computer based data retrieval system was developed to convert hard copy documents containing production, well completion and well log data into easily accessible on-line format. To ascertain the geological framework of the reservoir, a thorough geological modeling and subsurface mapping of the Carpinteria field was developed. The model is now used to examine the continuity of the sands, characteristics of the sub-zones, nature of water influx and transition intervals in individual major sands. The geological model was then supplemented with a reservoir engineering study of spatial distribution of voidage in individual layers using the production statistics and pressure surveys. Efforts are continuing in

  13. Drilling & completion techniques for coalbed methane wells in Jincheng Area,Shanxi,China%山西晋城地区煤层气钻井完井技术

    Institute of Scientific and Technical Information of China (English)

    田中岚

    2001-01-01

    通过对晋城地区所钻煤层气井的钻井完井技术总结,提出了适合该地区煤层气开发的钻井技术、完井技术、煤层保护技术、绳索取心技术、固井技术等。%It is introduced in the paper that a summary of drilling & completion techniques for coal-bed methane wells,which drilled in Jincheng area,Shanxi,China,1999.A set of techniques are suitable for coal-bed methane development are evaluated,such as drilling,completion,coal protection,wire line coring tools and coment.

  14. Hydraulic fracturing and wellbore completion of coalbed methane wells in the Powder River Basin, Wyoming: Implications for water and gas production

    Energy Technology Data Exchange (ETDEWEB)

    Colmenares, L.B.; Zoback, M.D. [Stanford University, Stanford, CA (United States). Dept. of Geophysics

    2007-01-15

    Excessive water production (more than 7000 bbl/month per well) from many coalbed methane (CBM) wells in the Powder River Basin of Wyoming is also associated with significant delays in the time it takes for gas production to begin. Analysis of about 550 water-enhancement activities carried out during well completion demonstrates that such activities result in hydraulic fracturing of the coal. Water-enhancement activities, consists of pumping 60 bbl of water/min into the coal seam during approximately 15 min. This is done to clean the well-bore and to enhance CBM production. Hydraulic fracturing is of concern because vertical hydraulic fracture growth could extend into adjacent formations and potentially result in excess CBM water production and inefficient depressurization of coals. Analysis of the pressure-time records of the water-enhancement tests enabled us to determine the magnitude of the least principal stress (S{sub 3}) in the coal seams of 372 wells. These data reveal that because S{sub 3} switches between the minimum horizontal stress and the overburden at different locations, both vertical and horizontal hydraulic fracture growth is inferred to occur in the basin, depending on the exact location and coal layer. Relatively low water production is observed for wells with inferred horizontal fractures, whereas all of the wells associated with excessive water production are characterized by inferred vertical hydraulic fractures. The reason wells with exceptionally high water production show delays in gas production appears to be inefficient depressurization of the coal caused by water production from the formations outside the coal. To minimize CBM water production, we recommend that in areas of known vertical fracture propagation, the injection rate during the water-enhancement tests should be reduced to prevent the propagation of induced fractures into adjacent water-bearing formations.

  15. 基于操作日志的完井数据同步模型%Well Completion Business Data Synchronization Model Research Based on Operation Log

    Institute of Scientific and Technical Information of China (English)

    吴雅娟; 任占广; 杜睿山

    2015-01-01

    同步技术是提高移动数据库系统性能的一项关键技术。依托完井移动平台,结合完井业务数据,提出一种基于操作日志的移动数据同步处理模型,重点分析了该模型中的日志序列的生成以及冲突的消解,并给出了具体的实现算法。该模型允许移动终端在断接状态下对本地副本数据进行操作,并通过移动事务日志记录用户行为,当重新连接时,根据服务器返回的日志序列进行同步处理,使系统最终收敛于一致性状态。同时还引入了日志合并、时间戳等方法,有效减少了移动终端的资源消耗,提高了同步效率。实验表明该算法能快速高效地完成客户端与服务器之间的数据更新与交互。%Synchronization technology is one of the key techniques to promote the performance of mobile database systems. This paper which relied on the well completion mobile platform and integrated the well completion business data proposed a mobile data synchronization model which is based on operation log. In this model, the generation of log sequences, and the resolution of conflicts are discussed in detail, and the implementation algorithm is proposed. In this model, mobile devices are allowed to access the local copy data and locally commit the mobile transactions when the system is disconnected, meanwhile the user behavior can also be recorded in the mobile transaction log. According to the log sequence which is returned by the synchronous server, the mobile devices can update the local data when the system is reconnected to ensure the consistency of data. Besides, by introducing the merger of log and time-stamp into the model, the model can reduce the resource consumption, and improve the efficiency of the synchronization. The experiments proved that the algorithm can exchange the well completion business data between mobile devices and synchronization server rapidly and efficiently.

  16. Mittelplate A23. Completion of Germany's first pressure tight multi lateral well; Mittelplate A23. Komplettierung und Inproduktionsnahme von Deutschlands erster druckdichter Multilateralbohrung

    Energy Technology Data Exchange (ETDEWEB)

    Boor, C.; Seemann, G.; Kainer, T. [RWE Dea AG, Hamburg (Germany)

    2011-07-15

    Mittelplate Drilling and Production Island is located in the Southern part of the Wattenmeer National Park in the North German state of Schleswig-Holstein. The Wattenmeer tidal flatlands have been a National Park since 1985. Oil production from the island commenced in 1987, RWE Dea AG as the operator and Wintershall Holding GmbH as an equal partner, have already benefited from producing in excess of 25 million mt of crude oil. Mittelplate A23 is Germany's first pressure tight (TAML 5) multi lateral well. The advantage of using this technology was that 4000 m had to be drilled through only once in order to reach three different reservoir compartments. This significantly increased the commercial potential and will help to develop the field faster using fewer of the restricted number of slots. As the junction of Mittelplate A23 was placed in relative close proximity to a water injector, the junction had to be absolutely pressure-tight and withstand a minimum pressure differential of 450 bars to ensure that no water enters into the production stream. The motherbore has an overall length of ca. 5940 m (2865 mTVD) with a gross pay zone of 1800 m. A window was milled through the 9 5/8'' casing of the main bore at 4100 m, a 7.00'' and 5.00'' liner were installed to the lateral and added an additional 1200 m gross pay zone. To initiate the junction a Baker Hughes S-3 Hook Hanger System was installed. The Hook Hanger facilitated access to main bore and lateral providing selective re-entry capability to each branch. To provide pressure integrity at the junction a dual string completion was connected to the Hook Hanger to tie the two laterals together and seal off the junction. Two of the most important components of the junction completion are the Dual Seal Module (DSM) to connect the dual tubing strings with the Hook Hanger and the Selective Re-entry Tool (SRT) which acts as a transition point from dual to single string. After the two

  17. Borehole Geophysical, Water-Level, and Water-Quality Investigation of a Monitoring Well Completed in the St. Francois Aquifer in Oregon County, Missouri, 2005-08

    Science.gov (United States)

    Schumacher, John G.; Kleeschulte, Michael J.

    2010-01-01

    A deep (more than 2,000 feet) monitoring well was installed in an area being explored for lead and zinc deposits within the Mark Twain National Forest in southern Missouri. The area is a mature karst terrain where rocks of the Ozark aquifer, a primary source of water for private and public supplies and major springs in the nearby Eleven Point National Wild and Scenic River and the Ozark National Scenic Riverways, are exposed at the surface. The potential lead deposits lie about 2,000 feet below the surface within a deeper aquifer, called the St. Francois aquifer. The two aquifers are separated by the St. Francois confining unit. The monitoring well was installed as part of a series of investigations to examine potentiometric head relations and water-quality differences between the two aquifers. Results of borehole flowmeter measurements in the open borehole and water-level measurements from the completed monitoring well USGS-D1 indicate that a seasonal upward gradient exists between the St. Francois aquifer and the overlying Ozark aquifer from about September through February. The upward potentiometric heads across the St. Francois confining unit that separates the two aquifers averaged 13.40 feet. Large reversals in this upward gradient occurred during the late winter through summer (about February through August) when water levels in the Ozark aquifer were as much as 138.47 feet higher (average of 53.84 feet) than water levels in the St. Francois aquifer. Most of the fluctuation of potentiometric gradient is caused by precipitation and rapid recharge that cause large and rapid increases in water levels in the Ozark aquifer. Analysis of water-quality samples collected from the St. Francois aquifer interval of the monitoring well indicated a sodium-chloride type water containing dissolved-solids concentrations as large as 1,300 milligrams per liter and large concentrations of sodium, chloride, sulfate, boron, and lithium. In contrast, water in the overlying Ozark

  18. Sexual life and sexual wellness in individuals with complete androgen insensitivity syndrome (CAIS) and Mayer-Rokitansky-Küster-Hauser Syndrome (MRKHS).

    Science.gov (United States)

    Fliegner, Maike; Krupp, Kerstin; Brunner, Franziska; Rall, Katharina; Brucker, Sara Y; Briken, Peer; Richter-Appelt, Hertha

    2014-03-01

    Sexual wellness depends on a person's physical and psychological constitution. Complete Androgen Insensitivity Syndrome (CAIS) and Mayer-Rokitansky-Küster-Hauser Syndrome (MRKHS) can compromise sexual well-being. To compare sexual well-being in CAIS and MRKHS using multiple measures: To assess sexual problems and perceived distress. To gain insight into participants' feelings of inadequacy in social and sexual situations, level of self-esteem and depression. To determine how these psychological factors relate to sexual (dys)function. To uncover what participants see as the source of their sexual problems. Data were collected using a paper-and-pencil questionnaire. Eleven individuals with CAIS and 49 with MRKHS with/without neovagina treatment were included. Rates of sexual dysfunctions, overall sexual function, feelings of inadequacy in social and sexual situations, self-esteem and depression scores were calculated. Categorizations were used to identify critical cases. Correlations between psychological variables and sexual function were computed. Sexually active subjects were compared with sexually not active participants. A qualitative content analysis was carried out to explore causes of sexual problems. An extended list of sexual problems based on the Diagnostic and Statistical Manual of Mental Disorders, 4th ed., text revision, by the American Psychiatric Association and related distress. Female Sexual Function Index (FSFI), German Questionnaire on Feelings of Inadequacy in Social and Sexual Situations (FUSS social scale, FUSS sexual scale), Rosenberg Self-Esteem Scale (RSE), Brief Symptom Inventory (BSI) subscale depression. Open question on alleged causes of sexual problems. The results point to a far-reaching lack of sexual confidence and sexual satisfaction in CAIS. In MRKHS apprehension in sexual situations is a source of distress, but sexual problems seem to be more focused on issues of vaginal functioning. MRKHS women report being satisfied with their

  19. A nearly completely artic-ulated rhamphorhynchoid pterosaur with exceptionally well-preserved wing mem-branes and "hairs" from In-ner Mongolia, northeast China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    We report a new and nearly completely articulated rhamphorhynchoid pterosaur, Jeholopterus ningchengensis gen. et sp. nov., with excellently preserved fibres in the wing membrane and "hairs" in the neck, body and tail regions. Many of its characteristics such as a short neck, short metacarpals and distinctively long fifth pedal digit are characteristic of rhamphorhynchoids. The new species can be further referred to the 'strange' short-tailed rhamphorhynchoid family Anurognathidae. It is much more complete than the other known members of the family, namely, Anurognathus from Solnhofen, Germany, Batrachognathus from Karatau, Kazakhstan, and Dendrorhynchoides from Beipiao, Liaoning Province, China. The new pterosaur also shows that the wing membrane is attached to the ankle of the hind limb. The pedal digits are webbed. Furthermore, the "hair" of Jeholopterus bears some resemblance to the hair-like integumental structures of the feathered dinosaur Sinosauropteryx although there is yet no direct evidence to argue for or against their homology.

  20. Completion Report for Wells ER-20-8 and ER-20-8#2 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-02-28

    Wells ER-20-8 and ER-20-8#2 were drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly Nevada Test Site), Nye County, Nevada. The holes were drilled in July and August 2009, as part of the Pahute Mesa Phase II drilling program. The primary purpose of these wells was to provide detailed hydrogeologic information in the Tertiary volcanic section that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic framework model. They may also be used as long-term monitoring wells.

  1. Sweet lake geopressured-geothermal project, Magma Gulf-Technadril/DOE Amoco Fee. Annual report, December 1, 1979-February 27, 1981. Volume I. Drilling and completion test well and disposal well

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, R.W. (ed.)

    1982-06-01

    The Sweet lake site is located approximately 15 miles southeast of Lake Charles in Cameron Parish, Louisiana. A geological study showed that the major structure in this area is a graben. The dip of the beds is northwesterly into the basin. A well drilled into the deep basin would find the target sand below 18,000', at high pressures and temperatures. However, since there is no well control in the basin, the specific site was chosen on the 15,000' contour of the target sand in the eastern, more narrow part of the garben. Those key control wells are present within one mile of the test well. The information acquired by drilling the test well confirmed the earlier geologic study. The target sand was reached at 15,065', had a porosity of over 20% and a permeability to water of 300 md. The original reservoir pressure was 12,060 psi and the bottom hole temperature 299{sup 0}F. There are approximately 250 net feet of sand available for the perforation. The disposal well was drilled to a total depth of 7440'.

  2. Selection of the optimal completion of horizontal wells with multi-stage hydraulic fracturing of the low-permeable formation, field C

    Science.gov (United States)

    Bozoev, A. M.; Demidova, E. A.

    2016-03-01

    At the moment, many fields of Western Siberia are in the later stages of development. In this regard, the multilayer fields are actually involved in the development of hard to recover reserves by conducting well interventions. However, most of these assets may not to be economical profitable without application of horizontal drilling and multi-stage hydraulic fracturing treatment. Moreover, location of frac ports in relative to each other, number of stages, volume of proppant per one stage are the main issues due to the fact that the interference effect could lead to the loss of oil production. The optimal arrangement of horizontal wells with multi-stage hydraulic fracture was defined in this paper. Several analytical approaches have been used to predict the started oil flow rate and chose the most appropriate for field C reservoir J1. However, none of the analytical equations could not take into account the interference effect and determine the optimum number of fractures. Therefore, the simulation modelling was used. Finally, the universal equation is derived for this field C, the reservoir J1. This tool could be used to predict the flow rate of the horizontal well with hydraulic fracturing treatment on the qualitative level without simulation model.

  3. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.

    1989-06-01

    The Site Characterization and Assessment Section of the Geosciences Department at Pacific Northwest Laboratory (PNL) has compiled a list of wells located on or near the Hanford Site. Information has been updated on wells existing from the days before construction of the Hanford Works to the present. This work was funded by the US Department of Energy (DOE). The list of wells will be used by DOE contractors who need condensed, tabular information on well location, construction, and completion dates. This report does not include data on lithologic logs and ground-water contamination. Moreover, the completeness of this list is limited because of new well construction and existing well modifications, which are continually under way. Despite these limitations, this list represents the most complete description possible of data pertaining to wells on or adjacent to the Hanford Site. 7 refs., 1 fig., 2 tabs.

  4. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.; Damschen, D.W.

    1977-06-01

    The Hanford Site contains about 2200 wells constructed from pre-Hanford Works days to the present. As of June 1977, about 1900 wells still exist, and about 850 of these existing wells were drilled to the ground-water table. About 700 of these wells (including about 24 farm wells) still contain water. The others have become dry through infiltration of sediments or a general lowering of the water table in their vicinity. This report, providing the most complete documentation of wells in and adjacent to the Hanford Site, supersedes all previous compilations of Hanford wells.

  5. Research on the Effect of Well Completion Technology of Ground Temperature Air-Conditioner Project on Groundwater System%地温空调成井工艺参数对地下水系统的影响

    Institute of Scientific and Technical Information of China (English)

    米庆彬; 付博; 窦明; 韩涛; 张彦; 张坤; 张华云

    2014-01-01

    在对成井环节分析的基础上,识别了对地下水系统影响较为显著的成井工艺参数(即井径和滤水管孔隙率),基于地下水水热运移基本原理,建立了地下水流动和热量输运耦合模型。选取典型地温空调项目,通过设计不同成井工艺参数,模拟地温空调运行对地下水流场和温度场的影响。结果显示:不同井径和孔隙率在地温空调运行中,对地下水系统影响程度差别较大,井径对抽水井、回水井的影响比较明显,孔隙率对抽水井的影响大于对回水井的影响,适合安阳市地温空调的井径为30 cm、滤水管孔隙率为30%。%According to the analysis of well completion process,this paper distinguished that the well completion tech-parameters (well diameter and filter porosity)could largely affect the groundwater system. Based on the fundamental principle of water and heat transfer,the coupling model of the flow of groundwater and the transport of heat was established. It selected several typical ground temperature air-conditioning projects in order to simulate the effect of ground temperature air-conditioning to the underground flow field and temperature field by design well completion technolo-gies with different parameters. From the results of simulation,it finds out that the different well diameter and filter porosity can make a great differ-ence on the effect of groundwater system. The well diameter can affect the pumping wells and recharge wells obviously,on another hand,the filter porosity parameter’s effect on the pumping wells is bigger than on recharge wells. It finds out that 30cm of well diameter and 30% of the porosity of filter are more suitable for the ground temperature air-conditioning project in Anyang City.

  6. Comparative investigation of predrilled liner and barefoot completion of horizontal wells in Stassfurt carbonate rock; Vergleich von Predrilled Liner-/Barefoot-Komplettierungen in horizontalen Bohrungen im Stassfurt-Karbonat

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.W. [Mobil Erdgas-Erdoel GmbH, Celle (Germany)

    1999-07-01

    When selecting the completion type of a horizontal well, all relevant aspects for production and reservoir engineering for safe and optimized long term production have to be considered. Mainly in sour gas wells with the need of corrosionresistent and expensive alloys, the technical/economic requirements for running a liner in the horizontal section are often be discussed. This paper compares the preinvestment of a 'Predrilled liner' with the costs of downhole operations which may become necessary in a 'Barefoot Completion'. These calculated 'Risk Savings' - as a function of the horizontal length - lead to a Break-Even-Point which is supposed to assist the decision of running a liner in sour gas wells or not. (orig.) [German] Bei der Auswahl der Komplettierung einer Horizontalbohrung ist es erforderlich, alle produktions- und lagerstaettentechnischen Aspekte einfliessen zu lassen, um langfristig eine sichere und optimierte Foerderung zu gewaehrleisten. Gerade in Sauergasbohrungen mit den korrosionsresistenten, sehr teuren Werkstoffen, wird die technisch/wirtschaftliche Notwendigkeit einer Verrohrung des horizontalen Aufschlusses haeufig diskutiert. In diesem Beitrag werden die Investition fuer einen 'Predrilled Liner' und Folgekosten von moeglichen Untertage-Arbeiten in einer 'Barefoot - Completion' in Sauergasbohrungen gegenuebergestellt und bewertet. Aus den errechneten 'Risked Savings' wird in Abhaengigkeit der Laenge des Traegeraufschlusses ein Break-Even-Point ermittelt, der eine Entscheidungshilfe fuer eine Traegerverrohrung im Stassfurtkarbonat darstellen soll. (orig.)

  7. φ139.7 mm 筛管顶部注水泥免钻塞固井完井技术%φ139.7 mm Plug-Drilling-Free Well Cementing Completion Technology

    Institute of Scientific and Technical Information of China (English)

    冯德杰; 李国锋; 赵勇

    2014-01-01

    φ139.7 mm plug-drilling-free well cementing completion technology was studied to replace conventional φ139.7 mm screen top cementing technique which was deficient over an extended period of plug drilling ,sticking ,casing and screen damage ,and impact on subsequent tripping-in of the string .Based on the screen-top-cementing well completion technique ,the existing φ177.8 mm plug-drilling-free well ce-menting tool was redesigned by adding ball socket ,upper rubber packer ,and removable sealing mechanism and optimizing the pressure differential of shear pins ,so as to develop theφ139.7 mm plug-drilling-free well cementing tool and supporting technology .Field tests in 3 wells showed that the φ139.7 mm plug-drilling-free well cementing tool could create piston effects for the circulation while running casing ,well cementing assisted with the upper rubber packer ,and fish releasing after landing ,thus reducing the fishing force by more than 200 kN and the completion time by about 30% .The study also suggested that the φ139.7 mm plug-drilling-free well completion technology was devoid of such completion procedures as plug drilling , thus avoiding risks in completions .T herefore ,the technology is suitable for screen-top-cementing opera-tions in all kinds of oil reservoirs ,and medium-deep ,deep and large-hole wells .%为解决常规φ139.7 mm筛管顶部注水泥固井时钻塞时间长、易卡钻、易损坏套管和筛管、影响后期作业管柱下入等问题,依据筛管顶部注水泥固井完井技术要求,在现有φ177.8 m m免钻塞固井工具的基础上,通过设计增加球座、上封隔胶筒和可移动密封机构,优化剪钉压力级差,研制了φ139.7 mm 免钻塞固井工具,形成了φ139.7 m m免钻塞固井完井配套技术。该技术在3口井进行了现场试验,结果表明,φ139.7 m m免钻塞固井工具可实现下套管钻井液循环、上封隔胶筒辅助固井、碰压后解除打捞时的

  8. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    Chamness, M.A.; Merz, J.K.

    1993-08-01

    Records describing wells located on or near the Hanford Site have been maintained by Pacific Northwest Laboratory and the operating contractor, Westinghouse Hanford Company. In support of the Ground-Water Surveillance Project, portions of the data contained in these records have been compiled into the following report, which is intended to be used by those needing a condensed, tabular summary of well location and basic construction information. The wells listed in this report were constructed over a period of time spanning almost 70 years. Data included in this report were retrieved from the Hanford Envirorunental Information System (HEIS) database and supplemented with information not yet entered into HEIS. While considerable effort has been made to obtain the most accurate and complete tabulations possible of the Hanford Site wells, omissions and errors may exist. This document does not include data on lithologic logs, ground-water analyses, or specific well completion details.

  9. 实体筛管完井技术在氮气钻井中的应用%Application of stuffed screen pipe completion technology in N2 drilled wells

    Institute of Scientific and Technical Information of China (English)

    赵前进

    2009-01-01

    In view of the unique and complicated completion method for gas drilling, and high cost and low reliability of DDV and leakless inflatable screen pipe, the stuffed screen pipe with temporary plugging agent was developed autonomously. With this technology, the screen pipe was plugged with temporary plugging agent to be blank tubing in advance, and then slot or perforate holes on the pipe. After running the screen pipe downhole, the temporary plugging agent will be drilled, and then the formation will communicate with screen pipe. This technology was successfully used in the N_2 drilled well which is Niuqi-1 Well in Santanghu Oil Field, the daily production rate after completion was 2.5×10~4 m~3 which is 6 times more than offset wells. The low cost, low pollution and safer screen pipe designing method is an effective means for N_2 drilled wells completion.%针对气体钻井完井方式单一、完井程序复杂、采用套管阀或非透式可膨胀筛管完井技术成本高、可靠性差等问题,自主研发了利用暂堵剂密封筛管的实体筛管完井技术.该技术先将筛管用暂堵剂密封为盲管后对其进行割缝或打孔处理,然后利用成熟的下尾管完井技术入井后钻掉暂堵剂,最终实现储层与筛管连通.该技术在三塘湖油田牛气1井氮气钻井中得到了成功应用,完钻后日产气量2.5×10~4 m~3,为邻井的6倍以上,实现了低成本、零污染、安全顺利下入筛管的全过程氮气钻完井技术,为降低氮气钻井筛管完井成本提供了一条有效的途径.

  10. 高压气井完井管柱的流固耦合振动模型及其应用%A fluid-solid coupled oscillation model for completion string and its application in high pressure gas well

    Institute of Scientific and Technical Information of China (English)

    樊洪海; 王宇; 张丽萍; 杨行; 杨向同; 魏峰

    2011-01-01

    瞬态压力冲击诱发充液管道结构耦合振动,剧烈的振动将导致管道结构失效.笔者将进一步阐明天然气的瞬变流动诱发高压气井完井管柱的耦合振动过程.根据充液管道流固耦合振动模型,推导了适用于气井完井管柱的流固耦合振动四方程模型,采用特征线法及线性插值方法进行数值求解.以现场一口高压气井井口阀门开启过程中的瞬态响应为例,结合完井管柱系统的初边值条件,利用MATLAB语言编制了相应的计算机程序,计算分析了流体与管柱的耦合振动响应过程.计算结果表明:天然气的瞬变流动通过泊松耦合效应诱发完井管柱轴向往复运动,轴向往复运动将加剧完井管柱结构的疲劳破坏与磨损破坏.该结果对预防完井管柱先期失效有实际工程意义.%Transient pressure fluctuations in a liquid-filled pipe could induce coupled oscillations of pipe structures, even a structural failure if severe.The present paper elaborated the coupled oscillation process of completion string induced by transient flow of natural gas, and a fluid-solid coupled oscillation four-equation model applicable to completion string in gas wells was derived based on the fluid-solid coupled oscillation model for liquid-filled pipes.The model was numerically solved by the characteristic method and linear interpolation.Taking a transient flow caused instantaneously by opening the valve of a high-pressure gas well as an example, a corresponding software, combined with initial and boundary conditions, was programmed with the MATLAB code, which could calculate and analyze the process in response to coupled oscillations derived from fluid and pipe string.The calculation indicated that the transient flow of natural gas could induce an axial reciprocation of completion string by the Poisson coupling effect, which would aggravate the structural damage of completion string via stress fatigue and rubbing abrasion

  11. Application of 13Cr Steel in CO2 Gas Well Completion Packer%13Cr 钢在含 CO2气井用完井封隔器上的应用

    Institute of Scientific and Technical Information of China (English)

    孙志扬; 罗君; 姜建平; 焦阳

    2016-01-01

    CO2腐蚀是世界石油工业中常见的腐蚀类型,CO2溶于水后对钢铁具有极强的腐蚀性,会对油套管及井下工具产生严重腐蚀。13Cr 钢具有良好的抗 CO2腐蚀性能,可以满足含 CO2气井用完井封隔器的使用要求。本文主要讲述了13Cr 钢在含 CO2气井用完井封隔器上的应用情况,说明了含 CO2气井用完井封隔器材料选用原则,针对13Cr 钢在加工过程中发生的问题,给出了解决方案,并介绍了这种完井封隔器的室内试验情况。%CO2 corrosion is a common type of corrosion in petroleum industry. However, with excellent CO2 corrosion resistance, the 13Cr steel can satisfy the requirements of CO2 gas well completion packer. This paper mainly described the application of 13Cr steel in CO2 gas well completion packer, explained the material selection principle, provided solutions for processing problems, and introduced the indoor test results.

  12. Complete prewetting

    Science.gov (United States)

    Yatsyshin, P.; Parry, A. O.; Kalliadasis, S.

    2016-07-01

    We study continuous interfacial transitions, analagous to two-dimensional complete wetting, associated with the first-order prewetting line, which can occur on steps, patterned walls, grooves and wedges, and which are sensitive to both the range of the intermolecular forces and interfacial fluctuation effects. These transitions compete with wetting, filling and condensation producing very rich phase diagrams even for relatively simple prototypical geometries. Using microscopic classical density functional theory to model systems with realistic Lennard-Jones fluid-fluid and fluid-substrate intermolecular potentials, we compute mean-field fluid density profiles, adsorption isotherms and phase diagrams for a variety of confining geometries.

  13. A new numerical coupling model of horizontal well completed with flow control method in bottom water reservoir%底水油藏水平井控流完井数值模拟耦合模型

    Institute of Scientific and Technical Information of China (English)

    陈阳; 彭志刚; 王绍先; 张建国; 张磊; 马明新

    2015-01-01

    为了预测控流完井条件下底水油藏水平井生产动态并设计关键控流参数,以数值模拟方法为数学求解手段,建立三维空间油水两相混合网格耦合模型,引入"拟传导率"概念,使得耦合模型中包含的油藏渗流、井筒管流和筛管控流3种数学模型可写成统一线性数学表达形式,从而方便建立大型线性方程组求解.结果表明:拟传导率反映相邻网格之间井筒管流或筛管控流流动过程中某相流体流量和压降的比率,流体流动阻力越大,则拟传导率越小,反之亦然;相比常规裸眼井下滤砂管完井,用耦合模型设计控流参数的控流完井方法使得实例井流入流率剖面、油藏渗流压降剖面、水脊前缘上升剖面和见水时间剖面更加均衡,见水时间大幅延长.%A new 3D hybrid grid model for oil-water two-phase was built, in which numerical simulation was carried out to forecast production performance of a bottom water reservoir with horizontal wells completed using a flow control technique. The new model consists of reservoir flow, wellbore flow and ICD pipe flow control models. A parameter of"pseudo conductiv-ity" was defined in order to linearize the flow in wellbore and ICD pipe and to unify the mathematical expressions of all the three flow models, and then a system of linear equations coupling with the three flow models can be readily established and solved. The pseudo conductivity parameter is calculated as the ratio of the flow rate versus pressure drop for a certain fluid phase passing through adjacent grids by wellbore flow or the controlled flow through ICDs. The simulation results of a case study show that, the larger the flow resistance is, the smaller the pseudo conductivity will be, and vice versa. In comparison with the conventional open hole sand control completion method, the flow control method can greatly delay water breakthrough time by improving the performance of inflow and reducing the

  14. On completely irreducible operators

    Institute of Scientific and Technical Information of China (English)

    JIANG Zejian; SUN Shanli

    2006-01-01

    Let T be a bounded linear operator on Hilbert space H,M an invariant subspace of T.If there exists another invariant subspace N of T such that H=M+N and M ∩ N=0,then M is said to be a completely reduced subspace of T.If T has a nontrivial completely reduced subspace,then T is said to be completely reducible;otherwise T is said to be completely irreducible.In the present paper we briefly sum up works on completely irreducible operators that have been done by the Functional Analysis Seminar of Jilin University in the past ten years and more.The paper contains four sections.In section 1 the background of completely irreducible operators is given in detail.Section 2 shows which operator in some well-known classes of operators,for example,weighted shifts,Toeplitz operators,etc.,is completely irreducible.In section 3 it is proved that every bounded linear operator on the Hilbert space can be approximated by the finite direct sum of completely irreducible operators.It is clear that a completely irreducible operator is a rather suitable analogue of Jordan blocks in L(H),the set of all bounded linear operators on Hilbert space H.In section 4 several questions concerning completely irreducible operators are discussed and it is shown that some properties of completely irreducible operators are different from properties of unicellular operators.

  15. Completing $h$

    CERN Document Server

    Dienes, Keith R

    2014-01-01

    Nearly a decade ago, the science community was introduced to the $h$-index, a proposed statistical measure of the collective impact of the publications of any individual researcher. It is of course undeniable that any method of reducing a complex data set to a single number will necessarily have certain limitations and introduce certain biases. However, in this paper we point out that the definition of the $h$-index actually suffers from something far deeper: a hidden mathematical incompleteness intrinsic to its definition. In particular, we point out that one critical step within the definition of $h$ has been missed until now, resulting in an index which only achieves its stated objectives under certain rather limited circumstances. For example, this incompleteness explains why the $h$-index ultimately has more utility in certain scientific subfields than others. In this paper, we expose the origin of this incompleteness and then also propose a method of completing the definition of $h$ in a way which remai...

  16. Complete Makeover

    Science.gov (United States)

    2004-01-01

    [figure removed for brevity, see original site] Released July 23, 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth. Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms. We finish our look at Mars's dynamic atmosphere with an image of the surface that has been completely modified by the wind. Even the small ridges that remain have been ground down to a cliff-face with a 'tail' of eroded material. The crosshatching shows that the wind regime has remained mainly E/W to ENE/WSW. Image information: VIS instrument. Latitude 8.9, Longitude 221 East (139 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State

  17. 油藏耦合水平井调流控水筛管优选模型%An optimization model of completion strings with inner-located nozzle in horizontal wells coupled with reservoirs

    Institute of Scientific and Technical Information of China (English)

    王庆; 刘慧卿; 张红玲; 郑家朋

    2011-01-01

    根据质量守恒定律和动量定理,建立了与油藏耦合的水平井调流控水筛管优选模型.研究发现,相对于单纯的实施盲管段或调整嘴子大小的方武,实施管外封隔或在实施管外封隔的同时配合使用实施盲管段(或调整嘴子大小)的方式对产液剖面的调整幅度较大.由于高渗透带是主要的水淹带,同时又是主要的产液带,因此,过分限制高渗透带的产液量未必能取得较好的开发效果,因为在限制高渗透带产液量的同时也损失了产油量.在非均质油藏中,随着变异系数的增加,累积产油量减少;变异系数较大时,累积产油量减少的趋势更加明显;实施最优的调流措施时,累积产油量增加;当变异系数约为0.6时,调流的效果最好(增油量最大),变异系数太小或太大调流效果均不明显.%An optimization model for completion strings with inner-located nozzle of horizontal wells coupled with reservoirs was established according to the mass conservation law and momentum theorem. The study demonstrated that compared with the manner using a simple blank tubing or adjusting the nozzle size, the manner using an external casing packer only or additionally in conjunction with a blank tubing (or nozzle size adjustment) could adjust the production fluid profile in a wider range. Since the high permeability zone is both the major water flooded zone and the major fluid producing zone, an undue limit of the liquid producing amount of high permeability zones may not be able to achieve a preferable result of development due to the co-existence of the limited liquid producing amount and the loss of the crude output. In non-homogeneous bottom-water reservoirs, the cumulative oil production decreases with the increase of the variation coefficient, this trend is more obvious as the variation coefficient is greater. The best effect (the maximum increase of oil production) can be obtained when the variation coefficient is about

  18. 煤层气水平井完井用塑料筛管优化设计%Optimized Design of Plastic Screen Pipe for Coal Bed Methane Horizontal Well Completion

    Institute of Scientific and Technical Information of China (English)

    付利; 申瑞臣; 苏海洋; 乔磊; 王开龙

    2012-01-01

    塑料筛管完井技术能够提高煤层井壁的支撑能力,并能有效解决粉煤灰堵泵问题。在介绍塑料筛管完井工艺的基础上,对塑料筛管的几何参数进行了设计,采用计算流体动力学方法,使用Fluent软件对塑料筛管进行了压力损失计算,并对计算结果进行了分析和优化。分析结果表明,过流面积比越大压力损失越小,缝宽越小压力损失越小,筛眼越长越有利于降低压力损失;筛眼宽度对长条形筛管强度的影响很小,筛管变形位移随筛眼长度的增大而增大,60°相位角的筛管变形位移小且分布均匀。建议采用相位角呈60°、筛眼宽度为7 mm、筛眼长度为23~26 mm,过流面积比为3%~4%的筛管设计方案。%The plastic screen pipe can improve the supporting capacity of coal bed methane (CBM) well wall and effectively prevent fly ash from plugging the pump. The completion technology of plastic screen pipe was first introduced and then the geometric parameters of the screen pipe were designed. The computational fluid dynamic method and the Fluent software were adopted to conduct a calculation of the screen pipe pressure loss. The calcula- tion result was analyzed and optimized. The analysis shows that the greater the open area ratio, the less the pressure loss ; the smaller the slot width, the less the pressure loss ; the longer the screen mesh, the more favorable to the re- duction of pressure loss. The screen mesh width has little effect on the strength of long strip screen pipe. The de- formation and displacement of the screen pipe increase with the screen mesh length. The deformation and displacement of the screen pipe with the phase angle of 60°are less remarkable with an even distribution. It is suggested that the design scheme of the screen pipe be adopted with the phase angle being 60°, the screen mesh width being 7 ram, the screen mesh length being 23 -26 ram, and the open area ratio being 3% -4%.

  19. Feasibility of Optimizing Recovery and Reserves from a Mature and Geological Complex Multiple Turbidite Offshore Calif. Reservoir through the Drilling and Completion of a Trilateral Horizontal Well, Class III

    Energy Technology Data Exchange (ETDEWEB)

    Pacific Operators Offshore, Inc.

    2001-04-04

    The intent of this project was to increase production and extend the economic life of this mature field through the application of advanced reservoir characterization and drilling technology, demonstrating the efficacy of these technologies to other small operators of aging fields. Two study periods were proposed; the first to include data assimilation and reservoir characterization and the second to drill the demonstration well. The initial study period showed that a single tri-lateral well would not be economically efficient in redevelopment of Carpinteria's multiple deep water turbidite sand reservoirs, and the study was amended to include the drilling of a series of horizontal redrills from existing surplus well bores on Pacific Operators' Platform Hogan.

  20. Drilling and completion technique for high angle deviated wells in 3rd island of Jidong field%冀东3号岛大斜度井钻井技术

    Institute of Scientific and Technical Information of China (English)

    刘小龙; 靳秀兰; 张津; 王清利; 薛建兴; 凌红军

    2012-01-01

    The 3rd artificial island in Jidong field is surrounded by sea, with the area of 200 acres. To accelerate Oilfield development and achieve the objective of operation with multi rigs simultaneously without affecting each other, multiwell cluster is taken as the well deployment ways. Through optimizing plans, the upper wellbore collision is reasonably avoided. According to the characteristics of great number of high angle deviated wells and collapse tend of the formation with low drillability because of the big vertical section of basaltic layers in Guantao formation, the wellbore structure optimization, drilling fluid development, bid screening and drilling techniques were studied, taking Well NP13-X1046 and NP13-X1042 as examples. And it was applied in onsite drilling operations, which made the drilling process of high angle deviated wells successful in the island.%冀东油田3号人工岛四面环海,岛体面积0.1475 km2.为加快油田开发速度,达到多部钻机同时作业互不影响的目的,采用了丛式井组布井方式,通过方案优化合理规避了上部井眼碰撞的风险.针对岛上大斜度井多,馆陶组有大段玄武岩易垮、可钻性差的特点,以NP13-X1046井和NP13-X1042井2口井为例,进行了井身结构优选、钻井液体系研制、钻头优选和钻井技术措施的研究,并应用在实际钻井过程中,使岛上的大斜度井钻井能够顺利进行.

  1. Modern completion and start-up techniques for petroleum wells on Mittelplate: Mittelplate A 3a and 8b; Moderne Komplettierung und Inproduktionssetzung von Erdoelbohrungen auf Mittelplate am Beispiel Mittelplate A 3a und 8b

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, P. [RWE-DEA AG, Friedrichskoog (Germany). Foerderbetrieb Holstein

    1998-12-31

    The Mittelplate offshore platform is located 7 km offshore Schleswig-Holstein in the Wattenmeer national park. The contribution describes the completion and start-up operations. (orig.) [Deutsch] Seit ueber zehn Jahren betreibt das Mittelplate Konsortium die Bohr- und Foerderinsel Mittelplate. Sie liegt 7 km vor der Nordseekueste Schleswig-Holsteins im Nationalpark Wattenmeer an der Position von einer der drei vorausgegangenen Erkundungsbohrungen. Auf der mit Spundwaenden eingefassten kuenstlichen Insel befinden sich die notwendigen Foerder-, Aufbereitungs- und Zwischenlagereinrichtungen fuer Erdoel, als auch die Energieversorgungs-, Prozesssteuer- und Wohnbereiche. Ein in die Insel integrierter Hafen nimmt zum Abtransport des Reinoels eine der drei Oeltransport-Bargen auf, mit denen das Reinoel zum Anlanden nach Brunsbuettel gebracht wird. Am Beispiel der beiden in 1997 komplettierten Bohrungen Mittelplate A 3a und 8b soll im Folgenden ueber die Komplettierung und Inproduktionssetzung von Bohrungen auf Mittelplate berichtet werden. Es werden die Anforderungen an die Komplettierungstechnik vorgestellt und im Hinblick darauf die Beispielbohrungen erlaeutert. Abschliessend soll ein Blick in die Praxis der Komplettierungsarbeiten und der Inproduktionssetzung geworfen werden. (orig.)

  2. Well Spacing for Horizontal Wells

    Directory of Open Access Journals (Sweden)

    C.D.S. Keuengoua

    2011-06-01

    Full Text Available In the developing phase of a hydrocarbon reservoir and planning for drilling the production wells, it is necessary to drill the wells in an appropriate spacing to achieve maximum economic revenues during the reservoir life span. Well spacing which is the real location and interrelationship between producing oil or gas wells in an oil field is an important parameter. It is determined for the maximum ultimate production of a given reservoir and should be taken in consideration during well planning to avoid drilling of unnecessary wells. This study presents the concept of drainage area on horizontal well and horizontal productivity indices with different equations and their applications. A user friendly Excel Spreadsheet program was developed to calculate the productivity values of horizontal wells using three major available productivity equations. Also, the developed spreadsheet program was used to evaluate the effect of well spacing on the productivities of horizontal wells using productivity index approach and drainage area concept. It also helps to review the comparison between vertical and horizontal wells spacing based on drainage area concept. This program was validated, and then was used to study the effect of horizontal well length on the ratio of horizontal well productivity to vertical well productivity. The results show that higher ratio of horizontal well productivity to vertical well productivity values are obtained with increase length of the horizontal well. It is a very useful tool for making decision about the application of well spacing for horizontal wells.

  3. TestComplete cookbook

    CERN Document Server

    Alpaev, Gennadiy

    2013-01-01

    A practical cookbook, with a perfect package of simple, medium, and advanced recipes targeted at basic programmers as well as expert software testers, who will learn to create, manage, and run automated tests. It is packed with problem-solving recipes that are supported by simple examples.If you are a software tester or a programmer who is involved with testing automation using TestComplete, this book is ideal for you! You will be introduced to the very basics of using the tool, as well as polish any previously gained knowledge in using the tool. If you are already aware of programming basics,

  4. Single-trip subsea completions

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.J.; Lorenzatto, R.A.; Rittershaussen, J.H.; Barreto, J.L.; Filho, E.L.

    1994-12-31

    Reliability of completion equipment and rig time are becoming more and more critical for subsea completions because of continually increasing water depths in which operators are being required to complete wells. In addition, completion designs must reflect the more stringent economic requirements of today`s oil and gas industry. This paper describes the use of a single-trip completion system that has been successfully and economically installed in the offshore Marimba and Bonito fields of South America. This new completion system has the capability to land the tubing hanger and install it in the wellhead before setting the packer and compensating for subsequent tubing movement. The new system also can employ pre-job calculations--based on initial well conditions and anticipated conditions during production--that help determine appropriate completion configurations and bottomhole equipment compatibility. Many failures in offshore wells, whether platform or subsea, can be attributed to inappropriate application of downhole completion tools or methods. Use of pre-job calculations during the equipment design stage can facilitate proper selection of design criteria and can help ensure operational safety and cost efficiency. The development of this new completion system is discussed in detail. Three case histories that document successful test completions is reviewed along with the economic gains and advantages that the reduction in rig time generated.

  5. Militantly Well

    DEFF Research Database (Denmark)

    Vigh, Henrik Erdman

    2015-01-01

    futures that transcend conflict engagement and wartime suffering for young militiamen. It clarifies the positive prospects that are expected to lie beyond the known horrors of war. Though conflict and warfare may provide strange points of departure for talking about well-being, imaginaries of happiness...... stand out from a background of hardship and are talked about in both a quite concrete way, as a lack of insecurity, as well as in an abstract way, as realization of social being. However, for most of the people I talk to, happiness remains elusive and evades their desperate attempts to grasp it....... It appears, as such, simultaneously to be what life is most profoundly about, as well as the dimension of it that constantly seems to avoid capture....

  6. SCT Barrel Assembly Complete

    CERN Multimedia

    L. Batchelor

    As reported in the April 2005 issue of the ATLAS eNews, the first of the four Semiconductor Tracker (SCT) barrels, complete with modules and services, arrived safely at CERN in January of 2005. In the months since January, the other three completed barrels arrived as well, and integration of the four barrels into the entire barrel assembly commenced at CERN, in the SR1 building on the ATLAS experimental site, in July. Assembly was completed on schedule in September, with the addition of the innermost layer to the 4-barrel assembly. Work is now underway to seal the barrel thermal enclosure. This is necessary in order to enclose the silicon tracker in a nitrogen atmosphere and provide it with faraday-cage protection, and is a delicate and complicated task: 352 silicon module powertapes, 352 readout-fibre bundles, and over 400 Detector Control System sensors must be carefully sealed into the thermal enclosure bulkhead. The team is currently verifying the integrity of the low mass cooling system, which must be d...

  7. Liver Wellness

    Science.gov (United States)

    ... can cause the liver to swell and not work well. Prevention: Hepatitis A vaccination is the best way to prevent HAV. Other ways to stop the spread of HAV are: • Always washing your hands with soap and warm water immediately after using the bathroom ...

  8. Wellness Matters

    Science.gov (United States)

    Arteaga, Brenda

    2011-01-01

    Creating a healthier school in today's world of budget cuts and seemingly endless to-do lists is not only possible, but it is also imperative. Beyond the health implications, one of the most compelling reasons for creating healthier schools is that wellness serves as a power booster for learning. Numerous studies have documented what educators…

  9. Wellness Matters

    Science.gov (United States)

    Arteaga, Brenda

    2011-01-01

    Creating a healthier school in today's world of budget cuts and seemingly endless to-do lists is not only possible, but it is also imperative. Beyond the health implications, one of the most compelling reasons for creating healthier schools is that wellness serves as a power booster for learning. Numerous studies have documented what educators…

  10. Werable wellness

    DEFF Research Database (Denmark)

    Rozycki, Bartosz

    2015-01-01

    We live in a world full of rush and a ‘relaxed state of being’ might increasingly play a role in today’s fast paced society to overcome contemporary stress and related illnesses such as burn-outs. The Sleephones concept is a wearable wellness device that aims to support relaxation by combing music...

  11. Geodesically Complete Universe

    CERN Document Server

    Bars, Itzhak

    2011-01-01

    This talk is about solving cosmological equations analytically without approximations, and discovering new phenomena that could not be noticed with approximate solutions. We found all the solutions of the Friedmann equations for a specific model, including all the zero-size-bounce solutions that do not violate the null energy condition, as well as all the finite-size-bounce solutions, and then discovered model independent phenomena. Among them is the notion of geodesic completeness for the geometry of the universe. From this we learned a few new general lessons for cosmology. Among them is that anisotropy provides a model independent attractor mechanism to some specific initial values for cosmological fields, and that there is a period of antigravity in the history of the universe. The results are obtained only at the classical gravity level. Effects of quantum gravity or string theory are unknown, they are not even formulated, so there are new theoretical challenges.

  12. Research and Application of Offshore Drilling and Completion Technology of Efficient Sidetracking Slim-hole Hor-izontal Well%海上高效侧钻小井眼水平井钻完井技术研究及应用

    Institute of Scientific and Technical Information of China (English)

    赵少伟; 范白涛; 岳文凯; 李长林

    2016-01-01

    通过对常规侧钻小井眼方案的分析对比,结合钻机作业能力提出了高效侧钻小井眼水平井钻完井技术,包括小井眼水平井钻进、防砂方式优选、油水层的封隔等技术。通过在QHD32-6F平台4口调整井的钻完井实施证明,该技术能有效降低小尺寸套管侧钻井作业难度,大大降低了钻完井的综合成本,为海上钻完井提速增效发挥了重要作用。该技术具有很好的应用前景。%By comparing and analyzing the conventional project of sidetracking slim-hole horizontal well and considering the rig ability, this paper puts forward an offshore drilling and completion technology of efficient sidetracking slim-hole horizon-tal well, including the slim-hole horizontal well drilling, sand control methods optimization and oil-water layer packer.By the application of drilling and completion in 4 adjustment wells in QHD32-6F platform, it shows that with this technology, the operation difficulty can be effectively reduced for small size casing sidetracking and the comprehensive cost of drilling and completion can be greatly reduced.The broad application prospect of this technology is presented.

  13. Completing the Complete ECC Formulae with Countermeasures

    Directory of Open Access Journals (Sweden)

    Łukasz Chmielewski

    2017-02-01

    Full Text Available This work implements and evaluates the recent complete addition formulae for the prime order elliptic curves of Renes, Costello and Batina on an FPGA platform. We implement three different versions:(1 an unprotected architecture; (2 an architecture protected through coordinate randomization; and (3 an architecture with both coordinate randomization and scalar splitting in place. The evaluation is done through timing analysis and test vector leakage assessment (TVLA. The results show that applying an increasing level of countermeasures leads to an increasing resistance against side-channel attacks. This is the first work looking into side-channel security issues of hardware implementations of the complete formulae.

  14. Completions of rationals

    Directory of Open Access Journals (Sweden)

    Janusz J. Charatonik

    1994-05-01

    Full Text Available Spaces which are metrizable completions of the space Q of rationals are described. A characterization of metrizable spaces having the same family of metrizable completions as Q is deduced.

  15. Latino College Completion: Texas

    Science.gov (United States)

    Excelencia in Education (NJ1), 2012

    2012-01-01

    In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

  16. Completely random signed measures

    DEFF Research Database (Denmark)

    Hellmund, Gunnar

    Completely random signed measures are defined, characterized and related to Lévy random measures and Lévy bases.......Completely random signed measures are defined, characterized and related to Lévy random measures and Lévy bases....

  17. Latino College Completion: Kansas

    Science.gov (United States)

    Excelencia in Education (NJ1), 2012

    2012-01-01

    In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

  18. Latino College Completion: Hawaii

    Science.gov (United States)

    Excelencia in Education (NJ1), 2012

    2012-01-01

    In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

  19. Characterization of complete denture

    National Research Council Canada - National Science Library

    Srivastava, Rajeev; Choukse, Vivek

    2011-01-01

    Characterization is a procedure in which the character or collective qualities of a person are introduced in the complete denture, either by modification of teeth or denture bases, to make it appear...

  20. Hollow Maxillary Complete Denture

    National Research Council Canada - National Science Library

    Radke, Usha; Mundhe, Darshana

    2011-01-01

    .... The resorption occurs at a faster rate in mandibular arch as compared to the maxillary arch; but severely atrophic maxillae with large interridge distance often pose a clinical challenge during fabrication of a successful maxillary complete denture...

  1. BUSN 460 Complete Class

    OpenAIRE

    Laynebaril1

    2017-01-01

    BUSN 460 Complete Class Click Link Below To Buy:   http://hwcampus.com/shop/busn-460-complete-class/     Week 1 DQ 1 Selling your team’s services to CanGo  Week 1 DQ 2 Mission, Vision & Values  Week 2 DQ 1 Planning a Technological Solution  Week 2 DQ 2 Cost Benefit Analysis  Week 3 DQ 1 Flow Charting Processes  Week 3 DQ 2 Implementing Technology  Week 4 DQ 1 Group vs Team  Week  4 DQ 2 Matrixed Employee Environments  Week 5 DQ 1 Pe...

  2. Complete French Teach Yourself

    CERN Document Server

    Graham, Gaelle

    2010-01-01

    The best-selling complete course for a fun and effective way to learn French. This ISBN is for the paperback book. The corresponding audio support (ISBN: 9781444100068) is also available. The book and audio support can also be purchased as a pack (ISBN: 9781444100051).

  3. Complete-member Ethnography

    Directory of Open Access Journals (Sweden)

    Hsun-Yu Sharon Chuang

    2015-11-01

    Full Text Available Within the vast array of ethnographic research methodology, complete-member ethnography (CME is one ethnographic inquiry whose methodological development is still in infantile in intercultural communication research. Specifically in this article, the author includes four major sections to understand and to advance CME. First, the author reviews the historical development of CME, and realizes epistemological intimacy as the core of CME and as how researchers’ complete-memberships may be established. Second, the author explains the concept and practice of epistemological intimacy in extant literature. Third, the author advances the concept of epistemological intimacy to identify and explain five contextual factors that influence a complete-member ethnographer’s complete-membership to his or her research community. The five factors include historicity of identity, institutional memory, situational (intersubjectivity, consensual membership, and symbolic codes. In order to elucidate that said factors are essentially interrelated, the author supplements the five factors with her conceptualizations of selfhood/identity. In the end, the author discusses three potential contributions of how CME can advance critical communication research, which pertain to (a praxis and reflexivity, (b challenging struggles and inequalities in power and privilege, and (c promote hopeful social justice from within.

  4. Global Hyperbolicity and Completeness

    CERN Document Server

    Choquet-Bruhat, Y; Choquet-Bruhat, Yvonne; Cotsakis, Spiros

    2002-01-01

    We prove global hyperbolicity of spacetimes under generic regularity conditions on the metric. We then show that these spacetimes are timelike and null geodesically complete if the gradient of the lapse and the extrinsic curvature $K$ are integrable. This last condition is required only for the tracefree part of $K$ if the universe is expanding.

  5. Completeness of Lyapunov Abstraction

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Sloth, Christoffer

    2013-01-01

    This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

  6. Completeness of Lyapunov Abstraction

    Directory of Open Access Journals (Sweden)

    Rafael Wisniewski

    2013-08-01

    Full Text Available In this work, we continue our study on discrete abstractions of dynamical systems. To this end, we use a family of partitioning functions to generate an abstraction. The intersection of sub-level sets of the partitioning functions defines cells, which are regarded as discrete objects. The union of cells makes up the state space of the dynamical systems. Our construction gives rise to a combinatorial object - a timed automaton. We examine sound and complete abstractions. An abstraction is said to be sound when the flow of the time automata covers the flow lines of the dynamical systems. If the dynamics of the dynamical system and the time automaton are equivalent, the abstraction is complete. The commonly accepted paradigm for partitioning functions is that they ought to be transversal to the studied vector field. We show that there is no complete partitioning with transversal functions, even for particular dynamical systems whose critical sets are isolated critical points. Therefore, we allow the directional derivative along the vector field to be non-positive in this work. This considerably complicates the abstraction technique. For understanding dynamical systems, it is vital to study stable and unstable manifolds and their intersections. These objects appear naturally in this work. Indeed, we show that for an abstraction to be complete, the set of critical points of an abstraction function shall contain either the stable or unstable manifold of the dynamical system.

  7. Completeness of Lyapunov Abstraction

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Sloth, Christoffer

    2013-01-01

    This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

  8. Complete Rerouting Protection

    DEFF Research Database (Denmark)

    Stidsen, Thomas K.; Kjærulff, Peter

    2005-01-01

    In this paper we present a new protection method: Complete Rerouting. This is the most capacity e cient protection method for circuit switched networks and it is, to the best of our knowledge, the first time it has been described. We implement a column generation algorithm and test the performanc...

  9. The complete cosmicomics

    CERN Document Server

    Calvino, Italo

    2014-01-01

    The definitive edition of Calvino’s cosmicomics, bringing together all of these enchanting stories—including some never before translated—in one volume for the first time. In Italo Calvino’s cosmicomics, primordial beings cavort on the nearby surface of the moon, play marbles with atoms, and bear ecstatic witness to Earth’s first dawn. Exploring natural phenomena and the origins of the universe, these beloved tales relate complex scientific concepts to our common sensory, emotional, human world. Now, The Complete Cosmicomics brings together all of the cosmicomic stories for the first time. Containing works previously published in Cosmicomics, t zero, and Numbers in the Dark, this single volume also includes seven previously uncollected stories, four of which have never been published in translation in the United States. This “complete and definitive collection” (Evening Standard) reconfirms the cosmicomics as a crowning literary achievement and makes them available to new generations of reader...

  10. MKT 438 Complete Class

    OpenAIRE

    admin

    2015-01-01

      To purchase this material click below link   http://www.assignmentcloud.com/MKT-438/MKT-438-Complete-Class-Guide   For more classes visit www.assignmentcloud.com   MKT 438 Week 1 Individual Assignment Defining Public Relation Paper MKT 438 Week 2 Team Assignment Public Relations Campaign Overview Paper MKT 438 Week 3 Individual Assignment Functions of Public Relation Paper MKT 438 Week 3 Team Assignment Public Relations Campaig...

  11. Deployment Completion Report.

    Science.gov (United States)

    1983-02-24

    computer in its con- struction management effort. NMCE ONE enjoyed and fostered strong relations between the Seabees and the Fleet. * SUPLY: NMCB CNE’s...planning, & leadership present day to day on the projects was exhibited for the enbarka- tion. NMCB CNE maintained a strong Community Relations Program...DICMY LABR EX] EHM : 166 mandays(CAT 0115: 93, TRAINEE: 3, LOCAL: 70) 3. O OSITICH CF W= O : CAT 0115, TRAINEE, & LOAL 4. UIM’I OF PIOJIM: Completion

  12. CMS Is Finally Completed

    CERN Multimedia

    2008-01-01

    Yet another step in the completion of the Large Hadron Collider was taken yesterday morning, as the final element of the Compact Muon Solenoid was lowered nearly 100 meters bellow ground. After more than eight years of work at the world's most powerful particle accelerator, scientists hope that they will be able to start initial experiments with the LHC until the end of this year.

  13. LEAR construction completed

    CERN Multimedia

    1982-01-01

    In July 1982, LEAR construction was completed, the individual systems had been dry-tested. On 16 July, the first 50 MeV (309 MeV/c) protons from Linac 1 were injected and circulated. On 11 October, the first antiprotons from the AA, decelerated in the PS to 609 MeV/c, were injected. Also in 1982, acceleration, deceleration and stochastic cooling were successfully tested. See 9007366 for a more detailed description. See also 8201061, 8204131, 8309026.

  14. Complete androgen insensitivity syndrome

    Directory of Open Access Journals (Sweden)

    Tančić-Gajić Milina

    2015-01-01

    Full Text Available Introduction. Androgen insensitivity syndrome (AIS belongs to disorders of sex development, resulting from complete or partial resistance to the biological actions of androgens in persons who are genetically males (XY with normally developed testes and age-appropriate for males of serum testosterone concentration. Case Outline. A 21-year-old female patient was admitted at our Clinic further evaluation and treatment of testicular feminization syndrome, which was diagnosed at the age of 16 years. The patient had never menstruated. On physical examination, her external genitalia and breast development appeared as completely normal feminine structures but pubic and axillary hair was absent. Cytogenetic analysis showed a 46 XY karyotype. The values of sex hormones were as in adult males. The multisliced computed tomography (MSCT showed structures on both sides of the pelvic region, suggestive of testes. Bilateral orchiectomy was performed. Hormone replacement therapy was prescribed after gonadectomy. Vaginal dilatation was advised to avoid dyspareunia. Conclusion. The diagnosis of complete androgen insensitivity is based on clinical findigs, hormonal analysis karyotype, visualization methods and genetic analysis. Bilateral gonadectomy is generally recommended in early adulthood to avoid the risk of testicular malignancy. Vaginal length may be short requiring dilatation in an effort to avoid dyspareunia. Vaginal surgery is rarely indicated for the creation of a functional vagina. [Projekat Ministarstva nauke Republike Srbije, br. 175067

  15. Hilbert, completeness and geometry

    Directory of Open Access Journals (Sweden)

    Giorgio Venturi

    2011-11-01

    Full Text Available This paper aims to show how the mathematical content of Hilbert's Axiom of Completeness consists in an attempt to solve the more general problem of the relationship between intuition and formalization. Hilbert found the accordance between these two sides of mathematical knowledge at a logical level, clarifying the necessary and sufficient conditions for a good formalization of geometry. We will tackle the problem of what is, for Hilbert, the definition of geometry. The solution of this problem will bring out how Hilbert's conception of mathematics is not as innovative as his conception of the axiomatic method. The role that the demonstrative tools play in Hilbert's foundational reflections will also drive us to deal with the problem of the purity of methods, explicitly addressed by Hilbert. In this respect Hilbert's position is very innovative and deeply linked to his modern conception of the axiomatic method. In the end we will show that the role played by the Axiom of Completeness for geometry is the same as the Axiom of Induction for arithmetic and of Church-Turing thesis for computability theory. We end this paper arguing that set theory is the right context in which applying the axiomatic method to mathematics and we postpone to a sequel of this work the attempt to offer a solution similar to Hilbert's for the completeness of set theory.

  16. Complete agenesis of dorsal pancreas

    Directory of Open Access Journals (Sweden)

    Malwinder Singh

    2014-04-01

    Full Text Available Introduction: Complete agenesis of body and tail of pancreas is a very rare type of developmental anomaly of pancreas. It is important regarding its presentations of diabetes mellitus, pancreatitis, and exocrine insufficiency. Case Report: An old man had presented with atypical symptoms of obstructive jaundice with exocrine insufficiency. CECT helped to reveal the complete absence of the body and tail of pancreas with radiologically normal head with no signs of pancreatitis or mass lesion. Conclusions: The cause of agenesis of the dorsal pancreas is currently not well understood. It can also present lately as the presenting case. The presentations are usually related to secretory malfunctions. CECT is an initial investigation for diagnosis

  17. Well data summary sheets. Vol. 30. North Sea wells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This thirtieth volume of the `Well Data Summary sheets` includes data from three recently released offshore wells from the North Sea. The two wells Amalie-1/1A and Skarv-1 are situated in the Danish Central Graben area. The Ida-1 well is one of a number of Danish North Sea wells situated outside the Central Graben (se also Volume 25). Minor corrections have been made since the first edition. The `Complete index of released wells` had been updated. Volume 27, 28 and 29 are regional volumes; volume 27 includes well data from Southern Jutland; volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are included in volumes 17-26 and 30. Data references are made to the revised volumes and not to the original published reference. (au)

  18. Statistics a complete introduction

    CERN Document Server

    Graham, Alan

    2013-01-01

    Statistics: A Complete Introduction is the most comprehensive yet easy-to-use introduction to using Statistics. Written by a leading expert, this book will help you if you are studying for an important exam or essay, or if you simply want to improve your knowledge. The book covers all the key areas of Statistics including graphs, data interpretation, spreadsheets, regression, correlation and probability. Everything you will need is here in this one book. Each chapter includes not only an explanation of the knowledge and skills you need, but also worked examples and test questions.

  19. Complete thoracic ectopia cordis.

    Science.gov (United States)

    Alphonso, N; Venugopal, P S; Deshpande, R; Anderson, D

    2003-03-01

    Thoracic ectopia cordis is a rare congenital defect with very few reported survivors after surgical correction. We report a case of complete thoracic ectopia cordis with double outlet right ventricle. The diagnosis was established antenatally and a repair was undertaken soon after birth. The child remained stable and was extubated on the fifth post-operative day. Forty-eight hours later the child succumbed to an unexplained respiratory arrest. Also presented is a review of the different surgical strategies for this unusual condition.

  20. Photometric and Obscurational Completeness

    CERN Document Server

    Brown, R A

    2005-01-01

    We report a method that uses "completeness" to estimate the number of exrasolar planets discovered by an observing program with a direct-imaging instrument. We develop a completeness function for Earth-like planets on "habitable" orbits for an instrument with a central field obscuration, uniform sensitivity in an annular detection zone, and limiting sensitivity that is expressed as a "delta magnitude" with respect to the star, determined by systematic effects (given adequate exposure time). We demonstrate our method of estimation by applying it to our understanding of the coronagraphic version of the Terrestrial Planet Finder (TPF-C) mission as of October 2004. We establish an initial relationship between the size, quality, and stability of the instrument's optics and its ability to meet mission science requirements. We provide options for increasing the fidelity and versatility of the models on which our method is based, and we discuss how the method could be extended to model the TPF-C mission as a whole, t...

  1. Superluminality and UV Completion

    CERN Document Server

    Shore, G M

    2007-01-01

    The idea that the existence of a consistent UV completion satisfying the fundamental axioms of local quantum field theory or string theory may impose positivity constraints on the couplings of the leading irrelevant operators in a low-energy effective field theory is critically discussed. Violation of these constraints implies superluminal propagation, in the sense that the low-frequency limit of the phase velocity $v_{\\rm ph}(0)$ exceeds $c$. It is explained why causality is related not to $v_{\\rm ph}(0)$ but to the high-frequency limit $v_{\\rm ph}(\\infty)$ and how these are related by the Kramers-Kronig dispersion relation, depending on the sign of the imaginary part of the refractive index $\\Ima n(\\w)$ which is normally assumed positive. Superluminal propagation and its relation to UV completion is investigated in detail in three theories: QED in a background electromagnetic field, where the full dispersion relation for $n(\\w)$ is evaluated numerically for the first time and the role of the null energy con...

  2. Exact completions and small sheaves

    CERN Document Server

    Shulman, Michael

    2012-01-01

    We prove a general theorem which includes most notions of "exact completion". The theorem is that "k-ary exact categories" are a reflective sub-2-category of "k-ary sites", for any regular cardinal k. A k-ary exact category is an exact category with disjoint and universal k-small coproducts, and a k-ary site is a site whose covering sieves are generated by k-small families and which satisfies a weak size condition. For different values of k, this includes the exact completions of a regular category or a category with (weak) finite limits; the pretopos completion of a coherent category; and the category of sheaves on a small site. For a large site with k the size of the universe, it gives a well-behaved "category of small sheaves". Along the way, we define a slightly generalized notion of "morphism of sites", and show that k-ary sites are equivalent to a type of "enhanced allegory".

  3. Well data summary sheets. Vol. 33: North sea wells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This 33rd volume of the `Well Data Summary sheets` includes data from seven recently released offshore wells from the North Sea. The wells Baron-2, S.E. Adda-1 and Skjold Flank-1 were presented in our `Well Data Summary Sheets, special volume`, published May 1, 1997. In volume 33, the wells Baron-2 and Skjold Flank-1 are updated with respect to information on sidewall cores. Information regarding all released well data, included in our well data summary sheets, are available on GEUS homepage: http://www.geus.dk/ or the departments homepage: http://www.geus.dk/departments/geol-info-data-centre/geoldata.htm/. A complete index of releases wells in volumes 17-33 is included. (au)

  4. Algebraic totality, towards completeness

    CERN Document Server

    Tasson, Christine

    2009-01-01

    Finiteness spaces constitute a categorical model of Linear Logic (LL) whose objects can be seen as linearly topologised spaces, (a class of topological vector spaces introduced by Lefschetz in 1942) and morphisms as continuous linear maps. First, we recall definitions of finiteness spaces and describe their basic properties deduced from the general theory of linearly topologised spaces. Then we give an interpretation of LL based on linear algebra. Second, thanks to separation properties, we can introduce an algebraic notion of totality candidate in the framework of linearly topologised spaces: a totality candidate is a closed affine subspace which does not contain 0. We show that finiteness spaces with totality candidates constitute a model of classical LL. Finally, we give a barycentric simply typed lambda-calculus, with booleans ${\\mathcal{B}}$ and a conditional operator, which can be interpreted in this model. We prove completeness at type ${\\mathcal{B}}^n\\to{\\mathcal{B}}$ for every n by an algebraic metho...

  5. Link Prediction via Matrix Completion

    CERN Document Server

    Pech, Ratha; Pan, Liming; Cheng, Hong; Zhou, Tao

    2016-01-01

    Inspired by practical importance of social networks, economic networks, biological networks and so on, studies on large and complex networks have attracted a surge of attentions in the recent years. Link prediction is a fundamental issue to understand the mechanisms by which new links are added to the networks. We introduce the method of robust principal component analysis (robust PCA) into link prediction, and estimate the missing entries of the adjacency matrix. On one hand, our algorithm is based on the sparsity and low rank property of the matrix, on the other hand, it also performs very well when the network is dense. This is because a relatively dense real network is also sparse in comparison to the complete graph. According to extensive experiments on real networks from disparate fields, when the target network is connected and sufficiently dense, whatever it is weighted or unweighted, our method is demonstrated to be very effective and with prediction accuracy being considerably improved comparing wit...

  6. Juvenile eye growth, when completed?

    DEFF Research Database (Denmark)

    Fledelius, Hans C; Christensen, Anders S; Fledelius, Christian

    2014-01-01

    PURPOSE: To test Sorsby's classical statement of axial eye growth as completed at the age of 13 years, with a view also to differentiating between basic eye growth and juvenile elongation associated with eventual refractive change towards myopia. METHODS: (i) A total of 160 healthy eyes close...... was preferred for conventional ultrasound oculometry due to its extreme repeatability of measuring values, thus making it well fitted for evaluating very small differences. In particular, this had bearing for the decelerating end phase of growth in the longitudinal investigation. RESULTS: Sorby's statement...... about age 13 as general limit found support from the cross-sectional data, which suggested stable emmetropic eye size from about 11-12 years, with an average apparently outgrown male emmetropic value of 23.5 mm versus females' 22.9 mm. The longitudinal data, however, showed emmetropic growth also beyond...

  7. DAQ INSTALLATION IN USC COMPLETED

    CERN Multimedia

    A. Racz

    After one year of work at P5 in the underground control rooms (USC55-S1&S2), the DAQ installation in USC55 is completed. The first half of 2006 was dedicated to the DAQ infrastructures installation (private cable trays, rack equipment for a very dense cabling, connection to services i.e. water, power, network). The second half has been spent to install the custom made electronics (FRLs and FMMs) and place all the inter-rack cables/fibers connecting all sub-systems to central DAQ (more details are given in the internal pages). The installation has been carried out by DAQ group members, coming from the hardware and software side as well. The pictures show the very nice team spirit !

  8. 2010 ion run: completed!

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    After a very fast switchover from protons to lead ions, the LHC has achieved performances that allowed the machine to exceed both peak and integrated luminosity by a factor of three. Thanks to this, experiments have been able to produce high-profile results on ion physics almost immediately, confirming that the LHC was able to keep its promises for ions as well as for protons.   First direct observation of jet quenching. A seminar on 2 December was the opportunity for the ALICE, ATLAS and CMS collaborations to present their first results on ion physics in front of a packed auditorium. These results are important and are already having a major impact on the understanding of the physics processes that involve the basic constituents of matter at high energies. In the ion-ion collisions, the temperature is so high that partons (quarks and gluons), which are usually constrained inside the nucleons, are deconfined to form a highly dense and hot soup known as quark-gluon plasma (QGP). The existence of ...

  9. Complete Achilles tendon ruptures.

    Science.gov (United States)

    Landvater, S J; Renström, P A

    1992-10-01

    Achilles tendon ruptures can be treated nonsurgically in the nonathletic or low-end recreational athletic patient, particularly those more than 50 years of age, provided the treating physician does not delay in the diagnosis and treatment (preferably less than 48 hrs and possibly less than 1 week). The patient should be advised of the higher incidence of re-rupture of the tendon when treated nonsurgically. Surgical treatment is recommended for patients who are young and athletic. This is particularly true because the major criticism of surgical treatment has been the complication rate, which has decreased to a low level and to a mild degree, usually not significantly affecting the repair over time. Surgical treatment in these individuals seems to be superior not only in regard to re-rupture but also in assuring the correct apposition of the tendon ends and in placing the necessary tension on the tendon to secure appropriate orientation of the collagen fibers. This in turn allows them to regain full strength, power, endurance, and an early return to sports. Surgery is also recommended for late diagnosed ruptures where there is significant lengthening of the tendon. Surgical technique should involve a medial incision to avoid the sural nerve, absorbable suture, and augmentation with fascia or tendon where there is a gap or late rupture. Postoperatively, the immobilization should be 7 to 10 days in a splint. A walking boot with early motion in plantar flexion or a short leg cast with the tendon under slight tension should thereafter be used for 4 to 5 weeks. An early and well-supervised rehabilitation program should be initiated to restore the patient to the preinjury activity level.

  10. BOOK REVIEW: Complete Physics

    Science.gov (United States)

    Carson, Simon

    2000-03-01

    This book contains all the essential concepts for GCSE (or equivalent) physics courses or for general science courses at Key Stage 4. It claims to be ideal for use as a bridging resource for those intending to take physics beyond GCSE: it is no surprise, then, that the book is written at a level above that of the average Key Stage 4 student. It includes material not included in many GCSE syllabuses; this is clearly identified in the contents pages. It would be a useful resource for more able students at GCSE or for beginning A-level students. The layout of the book is attractive. It is well illustrated and colourful. Some of the illustrations are striking: each of the 12 main sections of the book begins with a title page that includes some unusual photographs illustrating physical ideas. Section 2, Forces and Motion, has a photograph of a bungee jumper leaping from the Sky Tower in New Zealand, taken at night looking along the length of the tower from its foot. Section 9, Magnets and Currents, has a computer-generated picture of the magnetic field in a fusion generator. These pictures, as well as contributing to the attractiveness of the book, could be used to initiate discussions of some of the physics. However, there are pictures that serve little useful purpose: a photograph of a recording station for seismic waves looks like any other building lit up at night. A photograph of a rock band in the middle of a section on sound carries no explanatory caption at all and is purely decorative. Other illustrations - in a variety of styles - do illustrate some physical ideas very well: the diagrams of motors and generators, for instance, are far clearer than my efforts on the blackboard! The book is divided into 14 sections with titles reflecting the traditional divisions of physics syllabuses, together with a beginning section on measurement and units and two final sections, `History of Key Ideas' and `Experimental Physics'. The first section, `Measurement and Units

  11. EIA completes corrections to drilling estimates series

    Energy Technology Data Exchange (ETDEWEB)

    Trapmann, W.; Shambaugh, P. [Energy Information Administration, Washington, DC (United States)

    1998-11-23

    The Energy Information Administration (EIA) has published monthly and annual estimates of US oil and gas drilling activity since 1978. These data are key information for many industry analysts, serving as a leading indicator of trends in the industry and a barometer of general industry status. They are assessed directly for trends, as well as in combination with other measures to assess the productivity and profitability of upstream industry operations. They are major reference points for federal and state policymakers. EIA does not itself collect drilling activity data. Instead, it relies on an external source for data on oil, bas, and dry well completions. These data are provided to EIA monthly on an as reported basis. During a recent effort to enhance EIA`s well completion data system, the detection of unusual patterns in the well completion data as received led to an expanded examination of these data. Substantial discrepancies between the data as received by EIA and correct record counts since 1987 were identified. For total wells by year, the errors ranged up to more than 2,300 wells, 11% of the 1995 total, and the impact of these errors extended backward in time to at least the early 1980s. When the magnitude and extent of the as reported well completion data problem were confirmed, EIA suspended its publication and distribution of updated drilling data. EIA staff proceeded to acquire replacement files with the as reported records and then revise the statistical portion of its drilling data system to reflect the new information. The replacement files unfortunately also included erroneous data based on the improper allocation of wells between exploration and development. EIA has now resolved the two data problems and generated revised time series estimates for well completions and footage drilled. The paper describes the problems in the data, differences between the series, and maintaining future data quality.

  12. Integrated Association Rules Complete Hiding Algorithms

    Directory of Open Access Journals (Sweden)

    Mohamed Refaat Abdellah

    2017-01-01

    Full Text Available This paper presents database security approach for complete hiding of sensitive association rules by using six novel algorithms. These algorithms utilize three new weights to reduce the needed database modifications and support complete hiding, as well as they reduce the knowledge distortion and the data distortions. Complete weighted hiding algorithms enhance the hiding failure by 100%; these algorithms have the advantage of performing only a single scan for the database to gather the required information to form the hiding process. These proposed algorithms are built within the database structure which enables the sanitized database to be generated on run time as needed.

  13. p-topological Cauchy completions

    Directory of Open Access Journals (Sweden)

    J. Wig

    1999-01-01

    Full Text Available The duality between “regular” and “topological” as convergence space properties extends in a natural way to the more general properties “p-regular” and “p-topological.” Since earlier papers have investigated regular, p-regular, and topological Cauchy completions, we hereby initiate a study of p-topological Cauchy completions. A p-topological Cauchy space has a p-topological completion if and only if it is “cushioned,” meaning that each equivalence class of nonconvergent Cauchy filters contains a smallest filter. For a Cauchy space allowing a p-topological completion, it is shown that a certain class of Reed completions preserve the p-topological property, including the Wyler and Kowalsky completions, which are, respectively, the finest and the coarsest p-topological completions. However, not all p-topological completions are Reed completions. Several extension theorems for p-topological completions are obtained. The most interesting of these states that any Cauchy-continuous map between Cauchy spaces allowing p-topological and p′-topological completions, respectively, can always be extended to a θ-continuous map between any p-topological completion of the first space and any p′-topological completion of the second.

  14. Western Canada SAGD drilling and completions performance

    Energy Technology Data Exchange (ETDEWEB)

    Turchin, S.; Tucker, R. [Ziff Energy Group (Canada)

    2011-07-01

    In the heavy oil industry, steam assisted gravity drainage (SAGD) is a thermal recovery method used to enhance oil recovery. In 2009, Ziff Energy carried out a study on SAGD drilling and completions performance in Western Canada. This paper presents the methodology used to assess drilling performances and the results obtained. This study was conducted on 159 SAGD well pairs and 1,833 delineation wells in the Western Canadian Sedimentary Basin from late 2004 to fall 2008. The drilling performance assessment was calculated from several aspects including well quality, drilling and completions cost performance and drilling time analysis. This study provided a detailed analysis of drilling and completions costs of SAGD which can help companies to improve their performance.

  15. Matrix Completions and Chordal Graphs

    Institute of Scientific and Technical Information of China (English)

    Kenneth John HARRISON

    2003-01-01

    In a matrix-completion problem the aim is to specifiy the missing entries of a matrix inorder to produce a matrix with particular properties. In this paper we survey results concerning matrix-completion problems where we look for completions of various types for partial matrices supported ona given pattern. We see that thc existence of completions of the required type often depends on thechordal properties of graphs associated with the pattern.

  16. Well-being

    OpenAIRE

    Blatný, M. (Marek); Šolcová, I. (Iva)

    2015-01-01

    The chapter first discusses two essential theoretical concepts of well-being: subjective well-being and psychological well-being. Then the main findings on the links between well-being and socio-demographic variables are summarized. The main focus of the chapter is on the analysis of the links between personality and well-being. In agreement with the present views on personality domains, the relationships between well-being and personality traits, characteristic adaptations and personal narra...

  17. Complete Pick Positivity and Unitary Invariance

    CERN Document Server

    Bhattacharya, Angshuman

    2009-01-01

    The characteristic function for a contraction is a classical complete unitary invariant devised by Sz.-Nagy and Foias. Just as a contraction is related to the Szego kernel $k_S(z,w) = (1 - z\\ow)^{-1}$ for $|z|, |w| < 1$, by means of $(1/k_S)(T,T^*) \\ge 0$, we consider an arbitrary open connected domain $\\Omega$ in $\\BC^n$, a complete Nevanilinna-Pick kernel $k$ on $\\Omega$ and a tuple $T = (T_1, ..., T_n)$ of commuting bounded operators on a complex separable Hilbert space $\\clh$ such that $(1/k)(T,T^*) \\ge 0$. For a complete Pick kernel the $1/k$ functional calculus makes sense in a beautiful way. It turns out that the model theory works very well and a characteristic function can be associated with $T$. Moreover, the characteristic function then is a complete unitary invariant for a suitable class of tuples $T$.

  18. Strong Completeness of Coalgebraic Modal Logics

    CERN Document Server

    Schröder, Lutz

    2009-01-01

    Canonical models are of central importance in modal logic, in particular as they witness strong completeness and hence compactness. While the canonical model construction is well understood for Kripke semantics, non-normal modal logics often present subtle difficulties - up to the point that canonical models may fail to exist, as is the case e.g. in most probabilistic logics. Here, we present a generic canonical model construction in the semantic framework of coalgebraic modal logic, which pinpoints coherence conditions between syntax and semantics of modal logics that guarantee strong completeness. We apply this method to reconstruct canonical model theorems that are either known or folklore, and moreover instantiate our method to obtain new strong completeness results. In particular, we prove strong completeness of graded modal logic with finite multiplicities, and of the modal logic of exact probabilities.

  19. Dynamic reservoir well interaction

    NARCIS (Netherlands)

    Sturm, W.L.; Belfroid, S.P.C.; Wolfswinkel, O. van; Peters, M.C.A.M.; Verhelst, F.J.P.C.M.

    2004-01-01

    In order to develop smart well control systems for unstable oil wells, realistic modeling of the dynamics of the well is essential. Most dynamic well models use a semi-steady state inflow model to describe the inflow of oil and gas from the reservoir. On the other hand, reservoir models use steady s

  20. Unsteady Stokes Equations: Some Complete General Solutions

    Indian Academy of Sciences (India)

    A Venkatlaxmi; B S Padmavathi; T Amaranath

    2004-05-01

    The completeness of solutions of homogeneous as well as non-homogeneous unsteady Stokes equations are examined. A necessary and sufficient condition for a divergence-free vector to represent the velocity field of a possible unsteady Stokes flow in the absence of body forces is derived.

  1. Complete recovery after massive ethylene glycol ingestion.

    Science.gov (United States)

    Curtin, L; Kraner, J; Wine, H; Savitt, D; Abuelo, J G

    1992-06-01

    We treated a 64-year-old man who recovered completely from a massive antifreeze ingestion with ethylene glycol levels well above those of previously described survivors. Rapid and aggressive treatment of the patient with recognized methods, including hemodialysis, resulted in the favorable outcome.

  2. Completely regular fuzzifying topological spaces

    Directory of Open Access Journals (Sweden)

    A. K. Katsaras

    2005-12-01

    Full Text Available Some of the properties of the completely regular fuzzifying topological spaces are investigated. It is shown that a fuzzifying topology τ is completely regular if and only if it is induced by some fuzzy uniformity or equivalently by some fuzzifying proximity. Also, τ is completely regular if and only if it is generated by a family of probabilistic pseudometrics.

  3. Completely Continuous and Weakly Completely Continuous Abstract Segal Algebras

    Indian Academy of Sciences (India)

    Fatemeh Abtahi

    2013-11-01

    Let $\\mathcal{A}$ be a Banach algebra. It is obtained a necessary and sufficient condition for the complete continuity and also weak complete continuity of symmetric abstract Segal algebras with respect to $\\mathcal{A}$, under the condition of the existence of an approximate identity for $\\mathcal{B}$, bounded in $\\mathcal{A}$. In addition, a necessary condition for the weak complete continuity of $\\mathcal{A}$ is given. Moreover, the applications of these results about some group algebras on locally compact groups are obtained.

  4. Latino College Completion: New Mexico

    Science.gov (United States)

    Excelencia in Education (NJ1), 2012

    2012-01-01

    In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

  5. Complete axiomatizations for XPath fragments

    NARCIS (Netherlands)

    ten Cate, B.; Litak, T.; Marx, M.

    2010-01-01

    We provide complete axiomatizations for several fragments of Core XPath, the navigational core of XPath 1.0 introduced by Gottlob, Koch and Pichler. A complete axiomatization for a given fragment is a set of equivalences from which every other valid equivalence is derivable; equivalences can be thou

  6. well-being perspective

    African Journals Online (AJOL)

    well-being, namely: self-acceptance, personal growth, purpose in life, positive relations with others .... Sternberg, 2004] identifies the concepts of exploration and commitment from the work of ..... Clinical applications of well-being therapy.

  7. Structure completion for facade layouts

    KAUST Repository

    Fan, Lubin

    2014-11-19

    (Figure Presented) We present a method to complete missing structures in facade layouts. Starting from an abstraction of the partially observed layout as a set of shapes, we can propose one or multiple possible completed layouts. Structure completion with large missing parts is an ill-posed problem. Therefore, we combine two sources of information to derive our solution: the observed shapes and a database of complete layouts. The problem is also very difficult, because shape positions and attributes have to be estimated jointly. Our proposed solution is to break the problem into two components: a statistical model to evaluate layouts and a planning algorithm to generate candidate layouts. This ensures that the completed result is consistent with the observation and the layouts in the database.

  8. PRODUCTIVITY OF FRACTURED HORIZONTAL WELLS

    Directory of Open Access Journals (Sweden)

    Stjepan Antolović

    2009-12-01

    Full Text Available The interest and performance of horizontal drilling and completions has increased during the last two decades. Horizontal wells are advantageous compared to vertical wells in thin reservoirs, reservoirs with favorable vertical permeability and reservoirs with water and gas coning problems. In many reservoirs, the ratio of horizontal permeability to the vertical permeability is substantially larger than one and often is close to 10. Thus, these reservoirs are very good candidates for hydraulic fracturing. By hydraulic fracturing one or more fractures are created, which can be longitudinal or orthogonal. By that, flow is altered and it mostly conducts horizontally through reservoir toward horizontal wellbore. With this altered flow, fluid is produced faster, with less pressure loss by fluid unit of produced fluid. Some of the existing mathematical models to determine the productivity of multifractured horizontal wells are presented in this work (the paper is published in Croatian.

  9. Total well dominated trees

    DEFF Research Database (Denmark)

    Finbow, Arthur; Frendrup, Allan; Vestergaard, Preben D.

    cardinality then G is a total well dominated graph. In this paper we study composition and decomposition of total well dominated trees. By a reversible process we prove that any total well dominated tree can both be reduced to and constructed from a family of three small trees....

  10. Complexity of Products of Some Complete and Complete Bipartite Graphs

    Directory of Open Access Journals (Sweden)

    S. N. Daoud

    2013-01-01

    Full Text Available The number of spanning trees in graphs (networks is an important invariant; it is also an important measure of reliability of a network. In this paper, we derive simple formulas of the complexity, number of spanning trees, of products of some complete and complete bipartite graphs such as cartesian product, normal product, composition product, tensor product, and symmetric product, using linear algebra and matrix analysis techniques.

  11. [Biological review of completed suicide].

    Science.gov (United States)

    Otsuka, Ikuo; Sora, Ichiro; Hishimoto, Akitoyo

    2016-06-01

    Family, twin and adoption studies have revealed genetic factors involved in suicide, while the accumulation of stress and mental illnesses are major contributing factors of suicide. Since higher lethality of suicidal behavior is considered to increase familial liability to suicidal behavior, we believe biological research of completed suicide is most important for a better understanding of the pathophysiology in suicide. Dysregulated hypothalamic-pituitary-adrenal axis has gained a special interest in the neurobiology of suicide, mostly because of the findings using a dexamethasone suppression test (DST), in which DST non-suppressors show a nearly 10-fold higher risk of completed suicide than DST suppressors in a depressed cohort. Other data mainly from postmortem brain studies indicate abnormalities of the noradrenergic-locus coeruleus system, serotonergic system, endogenous opioid system, brain-derived neurotrophic factor, inflammatory cytokines and omega-3 fatty acid in completed suicide. However, genetic research of complete suicide is behind other mental problems because it is extremely difficult to obtain tissue samples of completed suicide. Under the difficult situation, we now retain over 800 blood samples of suicide completers thanks to bereaved families' cooperation. We are actively working on the research of suicide, for instance, by performing a GWAS using 500 samples of suicide completers.

  12. Trend of Complete Hydatidiform Mole

    Directory of Open Access Journals (Sweden)

    K Thapa

    2010-03-01

    Full Text Available INTRODUCTION: Complete Hydatidiform mole is one of the most frequent abnormal pregnancies. This review studies the trend of complete mole in Paropakar Maternity and Women's hospital and clinical ability to detect it. METHODS: This is a retrospective study of 504 cases of complete hydatidiform mole recorded at Paropakar maternity and women's hospital, Kathmandu, during 2058-2065 B.S. Medical records were reviewed and incidence, clinical presentation and method of diagnosis were studied. RESULTS: During the study period, there were 13,9117 births and 504 complete moles, 12 partial moles, 48 persistent gestational tumours, six choriocarcinoma and four invasive moles recorded in the hospital. The incidence of complete mole was one per 276 births. It was prevalent among women younger than 29 years (80% and among the primigravidae (36.7%. More than 90% women presented in the first half of their pregnancy and vaginal bleeding was the main complaint (68.3%. Suction evacuation, dilation and evacuation followed by sharp curettage and abdominal hysterectomy were performed in 80.6%, 17.6% and 1.2% of the women respectively. Persistent mole and choriocarcinoma developed in 9.5% and 0.4% respectively. CONCLUSIONS: Complete mole has the highest incidence. It affects mostly younger women and presents with vaginal bleeding most of the time, usually in the first half of their pregnancy. Keywords: complete hydatidiform mole, gestational trophoblastic disease, persistent gestational tumours.

  13. Isolated complete corpus callosal agenesis

    Directory of Open Access Journals (Sweden)

    Jaiganesh S, Venkateshwaran A, Naresh Kumar C, Rajasekhar KV

    2014-11-01

    Full Text Available Isolated complete corpus callosal agenesis is a rare entity. Usually this condition will be an associated finding in other syndromes. 3 month old male child came with complaints of deformed foot on both sides, not having a social smile and neck holding. Patient referred to the Radiology department for MRI brain which showed complete absence of corpus callosum, widely separated and parallely placed lateral ventricles, colpocephaly, high riding of 3rd ventricle and absence of cingulate gyrus and radial arrangement of gyri along the interhemispheric fissure. Hence it was reported as isolated complete corpus callosal agenesis and this article describes the Embryogenesis, anatomy, developmental anomalies and its clinical manifestations & prognosis.

  14. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. [Elf Aquitaine, 92 - Courbevoie (France)

    1998-12-31

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  15. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. (Elf Aquitaine, 92 - Courbevoie (France))

    1998-01-01

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  16. Large Hadron Collider nears completion

    CERN Multimedia

    2008-01-01

    Installation of the final component of the Large Hadron Collider particle accelerator is under way along the Franco-Swiss border near Geneva, Switzerland. When completed this summer, the LHC will be the world's largest and most complex scientific instrument.

  17. Characterization of Multiplicative Metric Completeness

    Directory of Open Access Journals (Sweden)

    Badshshah e Romer

    2016-03-01

    Full Text Available We established fixed point theorems in multiplicative metric spaces. The obtained results generalize Banach contraction principle in multiplicative metric spaces and also characterize completeness of the underlying multiplicative metric space.

  18. A new recipe for causal completions

    CERN Document Server

    Marolf, D; Marolf, Donald; Ross, Simon F.

    2003-01-01

    We discuss the asymptotic structure of spacetimes, presenting a new construction of ideal points at infinity and introducing useful topologies on the completed space. Our construction is based on structures introduced by Geroch, Kronheimer, and Penrose and has much in common with the modifications introduced by Budic and Sachs as well as those introduced by Szabados. However, these earlier constructions defined ideal points as equivalence classes of certain past and future sets, effectively defining the completed space as a quotient. Our approach is fundamentally different as it identifies ideal points directly as appropriate pairs consisting of a (perhaps empty) future set and a (perhaps empty) past set. These future and past sets are just the future and past of the ideal point within the original spacetime. This provides our construction with useful causal properties and leads to more satisfactory results in a number of examples. We are also able to endow the completion with a topology. In fact, we introduc...

  19. Isolated complete corpus callosal agenesis

    OpenAIRE

    Jaiganesh S, Venkateshwaran A, Naresh Kumar C, Rajasekhar KV

    2014-01-01

    Isolated complete corpus callosal agenesis is a rare entity. Usually this condition will be an associated finding in other syndromes. 3 month old male child came with complaints of deformed foot on both sides, not having a social smile and neck holding. Patient referred to the Radiology department for MRI brain which showed complete absence of corpus callosum, widely separated and parallely placed lateral ventricles, colpocephaly, high riding of 3rd ventricle and absence of cingulate gyrus an...

  20. Complete nitrification by Nitrospira bacteria

    DEFF Research Database (Denmark)

    Daims, Holger; Lebedeva, Elena V.; Pjevac, Petra

    2015-01-01

    Nitrification, the oxidation of ammonia via nitrite to nitrate, has always been considered to be a two-step process catalysed by chemolithoautotrophic microorganisms oxidizing either ammonia or nitrite. No known nitrifier carries out both steps, although complete nitrification should...... and were retrieved on Nitrospira-contigs in new metagenomes from engineered systems. These findings fundamentally change our picture of nitrification and point to completely nitrifying Nitrospira as key components of nitrogen-cycling microbial communities....

  1. Wellness in Industry.

    Science.gov (United States)

    Hackleman, Karen T.; And Others

    1985-01-01

    Reports on efforts of three institutions in response to need for consumer health information: Health Education Center (promotes health in southwestern Pennsylvania), Tulsa City-County Library (Oklahoma), and Wellness Council of the Midlands (WELCOM) (promotes wellness at work site in Omaha, Nebraska, area). WELCOM's 62-item reference list is…

  2. Staying Well at Work.

    Science.gov (United States)

    Blai, Boris, Jr.

    Employee wellness directly affects business/industry operations and costs. When employees are helped and encouraged to stay well, this people-positive policy results in triple benefits: reduced worker absenteeism, increased employee productivity, and lower company expenditures for health costs. Health care programs at the worksite offer these…

  3. New challenges? Well, certainly!

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.

    proficiency, but research as well as experience on the ground tells us that this is not enough. Everyone must learn to navigate in the multilingual and multicultural learning space because lecturers as well as students may come from different countries and cultures and therefore have different first languages...

  4. Water Treatment Technology - Wells.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on wells provides instructional materials for five competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: dug, driven, and chilled wells, aquifer types, deep well…

  5. Provider Health and Wellness.

    Science.gov (United States)

    Nanda, Anil; Wasan, Anita; Sussman, James

    2017-07-19

    Provider health and wellness is a significant issue and can impact patient care, including patient satisfaction, quality of care, medical errors, malpractice risk, as well as provider and office staff turnover and early retirement. Health and wellness encompasses various areas including burnout, depression, divorce, and suicide and affects providers of all specialties and at all levels of training. Providers deal with many everyday stresses, including electronic health records, office politics, insurance and billing issues, dissatisfied patients, and their own personal and family issues. Approximately half of all physicians suffer from burnout, and the rate of burnout among physicians of all specialties is increasing. An important first step in dealing with burnout is recognition and then seeking assistance. Strategies to prevent and treat burnout include increasing provider resiliency as well as implementing practical changes in the everyday practice of medicine. There is currently very little data regarding health and wellness specifically in the field of allergy and immunology, and studies are necessary to determine the prevalence of burnout and related issues in this field. Many medical specialties as well as state and national medical associations have health and wellness committees and other resources, which are essential for providers. Health and wellness programs should be introduced early in a provider's training and continued throughout a provider's career. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  6. Well production decline

    Energy Technology Data Exchange (ETDEWEB)

    Cvetkovic, Branimir

    2008-12-15

    Effective rate-time analysis during a declining production in an oil or gas wells is an important tool for establishing a successful management. The reasons behind the production decline include reservoir, fracture and well conditions. A well's decline rate is transient, signifying that the pressure wave propagates freely from the wellbore, leading to depletion when the outer boundary for the well is reached and to the wave propagation coming to a halt. This thesis studies the transient decline, with emphasis on a horizontal well with fracture wellbore responses. It also deals with the depletion decline, investigating the wellbore pressure responses for a vertical well producing under variable rate conditions of Arps decline. The well decline model solutions are analytical, and the modelling itself is carried out in two steps. The first step involves modelling the transient well responses of a multi fractured horizontal well. These responses originate from an infinitive reservoir and are considered as full-time rate-time responses. Multi-fractured horizontal well rate-time responses represent the solutions to a diffusion equation with varying boundary conditions and different fracture options (i.e., with or without fracture, a variety of fracture orientations, various fracture lengths, etc). The transient model calculates individual fracture rates, productivity indexes and an equivalent wellbore radius for the multi-fractured well. For the transient decline of a fractured-horizontal well model, well data is matched and the reservoir diagnosis and production prognosis are improved through the individual fracture production, with a model screening ability, and novel model features that can handle wellbore conditions changing from rate-to-pressure. Screening analyses can generate valuable information for fracture diagnosis in addition to a well and fracture production prognosis. Further model runs are carried out to match the real well data. The model solution is

  7. The WELL Detector

    CERN Document Server

    Bellazzini, R; Brez, A; Gariano, G; Latronico, L; Lumb, N; Papanestis, A; Spandre, G; Massai, M M; Raffo, R; Spezziga, M A

    1999-01-01

    We introduce the WELL detector, a new type of position-sensitive gas proportional counter produced using advanced printed circuit board (PCB) technology. The WELL is based on a thin kapton foil, copp erclad on both sides. Charge amplifying micro-wells are etched into the first metal and kapton layers. These end on a micro-strip pattern which is defined on the second metal plane. The array of micr o-strips is used for read-out to obtain 1-D positional information. First results from our systematic assessment of this device are reported.

  8. Agricultural Drainage Well Intakes

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Locations of surface intakes for registered agriculture drainage wells according to the database maintained by IDALS. Surface intakes were located from their...

  9. Optimizing well intervention routes

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Ronaldo O. [PETROBRAS S.A., Vitoria, ES (Brazil); Schiozer, Denis J.; Bordalo, Sergio N. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Centro de Estudo do Petroleo (CEPETRO)]. E-mail: denis@dep.fem.unicamp.br; bordalo@dep.fem.unicamp.br

    2000-07-01

    This work presents a method for optimizing the itinerary of work over rigs, i.e., the search for the route of minimum total cost, and demonstrates the importance of the dynamics of reservoir behaviour. The total cost of a route includes the rig expenses (transport, assembly and operation), which are functions of time and distances, plus the losses of revenue in wells waiting for the rig, which are also dependent of time. A reservoir simulator is used to evaluate the monetary influence of the well shutdown on the present value of the production curve. Finally, search algorithms are employed to determine the route of minimal cost. The Simulated Annealing algorithm was also successful in optimizing the distribution of a list of wells among different work over rigs. The rational approach presented here is recommended for management teams as a standard procedure to define the priority of wells scheduled for work over. (author)

  10. Emotional Well-Being

    Science.gov (United States)

    ... Cancer Nutrition Information (AICR) Emotional Well-Being Patient Empowerment Support Get Answers To Your Questions Meet Patients ... with kidney cancer, you may wish to seek professional assistance. These services may be covered by your ...

  11. Well Logging Symposium News

    Institute of Scientific and Technical Information of China (English)

    Yang Chunsheng

    1996-01-01

    @@ ‘96 International Symposium on Well Logging Techniques for Oilfield Development under Waterflood was held on 17-21 September, 1996 in Beijing. The symdrew than 160 experts and scholars in the well logging circle from Russia,The United States, France, Britain, Indonesia and China. About 80 papers were presented duringthe symposium. Mr. Zhang Yongyi,Vice President of CNPC delivered the opening remarks.

  12. Wellness as fairness.

    Science.gov (United States)

    Prilleltensky, Isaac

    2012-03-01

    I argue that distinct conditions of justice lead to diverse wellness outcomes through a series of psychosocial processes. Optimal conditions of justice, suboptimal conditions of justice, vulnerable conditions of injustice, and persisting conditions of injustice lead to thriving, coping, confronting, and suffering, respectively. The processes that mediate between optimal conditions of justice and thriving include the promotion of responsive conditions, the prevention of threats, individual pursuit, and avoidance of comparisons. The mechanisms that mediate between suboptimal conditions of justice and coping include resilience, adaptation, compensation, and downward comparisons. Critical experiences, critical consciousness, critical action, and righteous comparisons mediate between vulnerable conditions of injustice and confrontation with the system. Oppression, internalization, helplessness, and upward comparisons mediate between persisting conditions of injustice and suffering. These psychosocial processes operate within and across personal, interpersonal, organizational and community contexts. Different types of justice are hypothesized to influence well-being within each context. Intrapersonal injustice operates at the personal level, whereas distributive, procedural, relational, and developmental justice impact interpersonal well-being. At the organizational level, distributive, procedural, relational and informational justice influence well-being. Finally, at the community level, distributive, procedural, retributive, and cultural justice support community wellness. Data from a variety of sources support the suggested connections between justice and well-being.

  13. Complete Normal Ordering 1: Foundations

    CERN Document Server

    Ellis, John; Skliros, Dimitri P.

    2016-01-01

    We introduce a new prescription for quantising scalar field theories perturbatively around a true minimum of the full quantum effective action, which is to `complete normal order' the bare action of interest. When the true vacuum of the theory is located at zero field value, the key property of this prescription is the automatic cancellation, to any finite order in perturbation theory, of all tadpole and, more generally, all `cephalopod' Feynman diagrams. The latter are connected diagrams that can be disconnected into two pieces by cutting one internal vertex, with either one or both pieces free from external lines. In addition, this procedure of `complete normal ordering' (which is an extension of the standard field theory definition of normal ordering) reduces by a substantial factor the number of Feynman diagrams to be calculated at any given loop order. We illustrate explicitly the complete normal ordering procedure and the cancellation of cephalopod diagrams in scalar field theories with non-derivative i...

  14. UV completion without symmetry restoration

    CERN Document Server

    Endlich, Solomon; Penco, Riccardo

    2013-01-01

    We show that it is not possible to UV-complete certain low-energy effective theories with spontaneously broken space-time symmetries by embedding them into linear sigma models, that is, by adding "radial" modes and restoring the broken symmetries. When such a UV completion is not possible, one can still raise the cutoff up to arbitrarily higher energies by adding fields that transform non-linearly under the broken symmetries, that is, new Goldstone bosons. However, this (partial) UV completion does not necessarily restore any of the broken symmetries. We illustrate this point by considering a concrete example in which a combination of space-time and internal symmetries is broken down to a diagonal subgroup. Along the way, we clarify a recently proposed interpretation of inverse Higgs constraints as gauge-fixing conditions.

  15. Deformed Calabi-Yau Completions

    CERN Document Server

    Keller, Bernhard

    2009-01-01

    We define and investigate deformed n-Calabi-Yau completions of homologically smooth differential graded (=dg) categories. Important examples are: deformed preprojective algebras of connected non Dynkin quivers, Ginzburg dg algebras associated to quivers with potentials and dg categories associated to the category of coherent sheaves on the canonical bundle of a smooth variety. We show that deformed Calabi-Yau completions do have the Calabi-Yau property and that their construction is compatible with derived equivalences and with localizations. In particular, Ginzburg dg algebras have the Calabi-Yau property. We show that deformed 3-Calabi-Yau completions of algebras of global dimension at most 2 are quasi-isomorphic to Ginzburg dg algebras and apply this to the study of cluster-tilted algebras and to the construction of derived equivalences associated to mutations of quivers with potentials. In the appendix, Michel Van den Bergh uses non commutative differential geometry to give an alternative proof of the fac...

  16. Completeness in Hybrid Type Theory

    DEFF Research Database (Denmark)

    Areces, Carlos; Blackburn, Patrick Rowan; Huertas, Antonia;

    2014-01-01

    We show that basic hybridization (adding nominals and @ operators) makes it possible to give straightforward Henkin-style completeness proofs even when the modal logic being hybridized is higher-order. The key ideas are to add nominals as expressions of type t, and to extend to arbitrary types...... the way we interpret @i in propositional and first-order hybrid logic. This means: interpret @iαa , where αa is an expression of any type a , as an expression of type a that rigidly returns the value that αa receives at the i-world. The axiomatization and completeness proofs are generalizations of those...

  17. Complete Quasiconvex Mappings in Polydisc

    Institute of Scientific and Technical Information of China (English)

    LIU Tai-shun; ZHANG Wen-jun

    2006-01-01

    In this paper,a class of biholomorphic mappings called complete quasiconvex mappings is introduced and studied in bounded convex Reinhardt domains of Cn.Through a detailed analysis of the analytic characterization for this class of mappings,it is shown that this class of mappings contains the convex mappings and is also a subset of the class of starlike mappings.In the special case of the polydisc,a decomposition theorem is established for the complete quasiconvex mappings,which in turn is used to derive an improved sufficient condition for the convex mappings.

  18. Risk assessment for SAGD well blowouts

    Energy Technology Data Exchange (ETDEWEB)

    Worth, D.; Alhanati, F.; Lastiwka, M. [C-FER Technologies, Edmonton, AB (Canada); Crepin, S. [Petrocedeno, Caracas (Venezuela)

    2008-10-15

    This paper discussed a steam assisted gravity drainage (SAGD) pilot project currently being conducted in Venezuela's Orinoco Belt. A risk assessment was conducted as part of the pilot program in order to evaluate the use of single barrier completions in conjunction with a blowout response plan. The study considered 3 options: (1) an isolated double barrier completion with a downhole safety valve (DHSV) in the production tubing string and a packer in the production casing annulus; (2) a partially isolated completion with no DHSV and a packer in the production casing annulus; and (3) an open single barrier completion with no additional downhole barriers. A reservoir model was used to assess the blowout flowing potential of SAGD well pairs. The probability of a blowout was estimated using fault tree analysis techniques. Risk was determined for various blowout scenarios, including blowouts during normal and workover operations, as well as blowouts through various flow paths. Total risk for each completion scenario was also determined at 3 different time periods within the production life of the well pair. The possible consequences of a blowout were assessed using quantitative consequence models. Results of the study showed that environmental and economic risks were much higher for the open completion technique. Higher risks were also associated with the earlier life of the completion strings. 20 refs., 3 tabs., 19 figs.

  19. Reverse trade mission on the drilling and completion of geothermal wells

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-09

    This draft report was prepared as required by Task No. 2 of the US Department of Energy, Grant No. DE-FG07-89ID12850 Reverse Trade Mission to Acquaint International Representatives with US Power Plant and Drilling Technology'' (mission). As described in the grant proposal, this report covers the reactions of attendees toward US technology, its possible use in their countries, and an evaluation of the mission by the staff leaders. Note this is the draft report of one of two missions carried out under the same contract number. Because of the diversity of the mission subjects and the different attendees at each, a separate report for each mission has been prepared. This draft report has been sent to all mission attendees, specific persons in the US Department of Energy and Los Alamos National Lab., the California Energy Commission (CEC), and various other governmental agencies.

  20. DNA interstrand cross-link induced by estrogens as well as their complete and synergic carcinogenesis

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The estrogens show negative activity in Ames test, but estrodiol and diethylstilbestrol in estrogens both are carcinogens based upon animal experiments and epidemiological investigation. It is concluded from the di-region theory, a mechanism conception put forward by one of the present authors, that the carcinogenesis of estrogens is switched on by the covalent cross-link between complementary DNA bases induced by them. We verified for the first time by the DNA alkaline elution method that both estrodiol and diethylstilbestrol cause covalent cross-link between DNA-protein and DNA interstrands after metabolic activation with dosage correlation, but neither the non-carcinogens cholesterol nor pyrene can lead to these sorts of cross-link in the same condition. It has been known that there is a synergetic effect between estrogen and pollution of polycyclic aromatic hydrocarbons. Although non-carcinogenic pyrene alone cannot induce cross-link, its addition with equal molar quantity to estrodiol culture causes synergically the total and DNA interstrand cross-link ratios to be respectively four and three times more than the ones in the cultivation with estrodiol only. It is shown that not only the estrodiol set off the formation of pyrene bi-radicals, but also the pyrene radicals arouse conversely the production of estrodiol bi-radicals.

  1. Geothermal Well Stimulation

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D. A.; Morris, C. W.; Sinclair, A. R.; Hanold, R. J.; Vetter, O. J.

    1981-03-01

    The stimulation of geothermal wells presents some new and challenging problems. Formation temperatures in the 300-600 F range can be expected. The behavior of stimulation fluids, frac proppants, and equipment at these temperatures in a hostile brine environment must be carefully evaluated before performance expectations can be determined. In order to avoid possible damage to the producing horizon of the formation, high temperature chemical compatibility between the in situ materials and the stimulation materials must be verified. Perhaps most significant of all, in geothermal wells the required techniques must be capable of bringing about the production of very large amounts of fluid. This necessity for high flow rates represents a significant departure from conventional petroleum well stimulation and demands the creation of very high near-wellbore permeability and/or fractures with very high flow conductivity.

  2. YB0 SERVICES INSTALLATION COMPLETED

    CERN Multimedia

    The beauty of the completed YB0 was briefly visible at P5 as preparations continue for Tracker installation. A tremendous effort, lasting 7 months and involving more than 100 workers on the busiest days, resulted in 5700 electrical cables, 780 optical cables with 65k fibre channels, and 550 pipes laid on YB0 for HB, EB and Tracker.

  3. LHC Cost Review To Completion

    CERN Multimedia

    2001-01-01

    At the CERN Finance Committee and the Committee of Council on 19-20 September, CERN management presented a review of costs to completion in 2006 of the LHC project. A document on the web reviews the background, evolution, and facts behind these costs. To view it please go to: http://user.web.cern.ch/CERN/LHC.html

  4. Kurodoko is NP-Complete

    DEFF Research Database (Denmark)

    Kölker, Jonas

    2012-01-01

    In a Kurdoko puzzle,one must colour some squares in a grid black in a way that satisfies non-overlapping, non-adjacency, reachability and numeric constraints specified by the numeric clues in the grid. We show that deciding the solvability of Kurodoko puzzles is NP-complete....

  5. Largest particle detector nearing completion

    CERN Multimedia

    2006-01-01

    "Construction of another part of the Large Hadron Collider (LHC), the worl's largest particle accelerator at CERN in Switzerland, is nearing completion. The Compact Muon Solenoid (CMS) is oner of the LHC project's four large particle detectors. (1/2 page)

  6. A-3 steel work completed

    Science.gov (United States)

    2009-01-01

    Stennis Space Center engineers celebrated a key milestone in construction of the A-3 Test Stand on April 9 - completion of structural steel work. Workers with Lafayette (La.) Steel Erector Inc. placed the last structural steel beam atop the stand during a noon ceremony attended by more than 100 workers and guests.

  7. Completeness of the Accumulation Calculus

    Institute of Scientific and Technical Information of China (English)

    虞慧群; 孙永强; 等

    1998-01-01

    The accumulation calculs(AC for short)is an interval based temporal logic to specify and reason about hybrid real-time systems.This paper presents a formal proof system for AC,and proves that the system is complete relative to that of Interval Temporal Logic(ITL for short)on real domain.

  8. Investigation and evaluation of geopressured-geothermal wells. Final report, Tenneco Fee N No. 1 Well Terrebonne Paris, Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, R.J.; Hartsock, J.H.; McCoy, R.L.; Rodgers, J.A.

    1980-09-01

    The reservoir conditions that led to the choice of this well as the fifth well of opportunity are described as well as the attempts to complete the well for high-volume brine production. Individual opinions concerning underlying and conributing causes for the liner failure which aborted the completion attempt are included. (MHR)

  9. Well Conductor Strain Monitoring

    Science.gov (United States)

    2014-05-06

    comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2014 2. REPORT TYPE 3. DATES...849,429; filed on June 26, 2013 by the inventor, Dr. Anthony Ruffa and entitled “ SUBSEA WELL CONDUCTOR STRAIN MONITORING”. STATEMENT OF

  10. Rural Wellness and Prevention

    Science.gov (United States)

    ... governors of U.S. states have implemented wellness and prevention programs in their states in the last few years. The programs generally promote healthy habits, understanding of risks associated with lifestyles, disease management practices, and regular physical activity. Worksites provide ...

  11. Live Your Life Well

    Science.gov (United States)

    ... Workplace Wellness Work-Life Balance Mental Illness and Work Support an Employee Workplace Bullying & Violence Signs of a Healthy Workplace ... you can thrive even in the face of stress. We want you to know that you can ... you focus at work, overcome obstacles, get along with the people around ...

  12. Hantush Well Function Revisited

    NARCIS (Netherlands)

    Veling, E.J.M.; Maas, C.

    2010-01-01

    In this paper we comment on some recent numerical and analytical work to evaluate the Hantush Well Function. We correct an expression found in a Comment by Nadarajah (J. of Hydrology, vol. 338, p. 152-153 (2007)) to a paper by Prodanoff et al. (J. of Hydrology, vol. 318, p. 173-183 (2006)). We subse

  13. Child Wellness and Happiness

    Science.gov (United States)

    Rettew, David C.

    2009-01-01

    Wellness and happiness should be considered in the clinical treatment of child and adolescent psychiatry, in addition with thinking about illness. Meanwhile, various studies on child and adolescent psychiatry,which includes an article from the "Journal of Happiness Studies," are discussed.

  14. The world's deepest well

    Science.gov (United States)

    Kozlovskii, E. A.

    1984-12-01

    A 12,000-meter-deep research well at Kola in the Soviet Arctic is discussed. A major objective of the well was to penetrate into the basement rock of basaltic composition, presumably marked by an abrupt increase in the velocity of the seismic waves. At Kola the shift occurs at 9000 meters. However, instead of the basalt expected below that depth, an anomalous zone of disaggregated metamorphic rock was found. Further in that zone abundant flows of hot, highly mineralized 'water of crystallization' were found. Flows of gas, including helium, hydrogen, nitrogen, methane, and other hydrocarbons, and carbon dioxide were observed at all levels, thus indicating the existence of active gas-water processes, which raises the prospect of new ore deposits. The well utilizes a 400- to 500-ton aluminum alloy drill string. Unlike conventional drilling, the bit is powered by a turbine driven by the high-pressure flow of the drilling mud at 250 atm, which eliminates the disabling stresses at the surface caused by the rotation of the entire string. This technology opens the possibility of drilling to the depths of 15 to 17 km. The well is expected to help improve the interpretation of the seismic data.

  15. Why Does Well

    Science.gov (United States)

    Sartorius, Tara Cady

    2010-01-01

    There is something disappointing about life. It is messy and out of control. It seems the more one tries to put life in order, the more ordering there is to do. The more one seeks explanations, the more confusing things become. Life's an impossible task. Maybe one should just give up. Or, then again, one might as well keep trying. It's this…

  16. Child Wellness and Happiness

    Science.gov (United States)

    Rettew, David C.

    2009-01-01

    Wellness and happiness should be considered in the clinical treatment of child and adolescent psychiatry, in addition with thinking about illness. Meanwhile, various studies on child and adolescent psychiatry,which includes an article from the "Journal of Happiness Studies," are discussed.

  17. Robust Matrix Completion with Corrupted Columns

    CERN Document Server

    Chen, Yudong; Caramanis, Constantine; Sanghavi, Sujay

    2011-01-01

    This paper considers the problem of matrix completion, when some number of the columns are arbitrarily corrupted, potentially by a malicious adversary. It is well-known that standard algorithms for matrix completion can return arbitrarily poor results, if even a single column is corrupted. What can be done if a large number, or even a constant fraction of columns are corrupted? In this paper, we study this very problem, and develop an efficient algorithm for its solution. Our results show that with a vanishing fraction of observed entries, it is nevertheless possible to succeed in performing matrix completion, even when the number of corrupted columns grows. When the number of corruptions is as high as a constant fraction of the total number of columns, we show that again exact matrix completion is possible, but in this case our algorithm requires many more -- a constant fraction -- of observations. One direct application comes from robust collaborative filtering. Here, some number of users are so-called mani...

  18. Method of treating wells

    Energy Technology Data Exchange (ETDEWEB)

    Knox, J.A.; Lasater, R.M.

    1966-11-22

    Chemical compositions and methods are provided for treating underground formations to render their surfaces water-repellent or preferentially oil-wettable. Previous methods have provided only temporary water-repellency because they do not actually act chemically with the reservoir rock. This improvement is obtained by using a treating agent which does not form a precipitate upon hydrolysis with water, such as a liquid organo-halogen- silane or its ester. A water-soluble anhydrous solvent which is nonreactive with the silane is used as a carrier. This method may be used for treating non-oil-bearing aquifers for increasing the flow rate of water, such as in water supply wells, or in water input rate, such as in water disposal wells. (10 claims)

  19. Complete EOS for PBX 9502

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph S [Los Alamos National Laboratory

    2009-10-08

    PBX 9502 is an insensitive plastic-bonded explosive based on triamino-trinitrobenzene (TATB). A complete equation of state (EOS) is constructed for unreacted PBX 9502 suitable for reactive burn models, i.e., high pressure regime in which material strength is unimportant. The PBX EOS is composed of two parts: a complete EOS for TATB and a porosity model which allows for variations in the initial PBX density. The TATB EOS is based on a cold curve and a thermal model for lattice vibrations. The heat capacity, and hence thermal model, is determined by the vibrational spectrum from Raman scattering. The cold curve is calibrated to diamond anvil cell data for isothermal compression using a two-piece Keane fitting form. Hugoniot data for PBX 9502 is used as a consistency check.

  20. Zaha Hadid: The Complete Works

    OpenAIRE

    2004-01-01

    Zaha Hadid is probably the most famous woman architect in the world and the first to win the Pritzker Prize. She has achieved international recognition for her visionary images and design.\\ud \\ud The book offers the definitive overview of the creative trajectory of this architect and her practice.\\ud \\ud Zaha Hadid: The Complete Works has been judged as one of the most complex architectural monographs ever produced. The publication comprises four volumes of differing sizes that offer multiple...

  1. Complete normal ordering 1: Foundations

    Science.gov (United States)

    Ellis, John; Mavromatos, Nick E.; Skliros, Dimitri P.

    2016-08-01

    We introduce a new prescription for quantising scalar field theories (in generic spacetime dimension and background) perturbatively around a true minimum of the full quantum effective action, which is to 'complete normal order' the bare action of interest. When the true vacuum of the theory is located at zero field value, the key property of this prescription is the automatic cancellation, to any finite order in perturbation theory, of all tadpole and, more generally, all 'cephalopod' Feynman diagrams. The latter are connected diagrams that can be disconnected into two pieces by cutting one internal vertex, with either one or both pieces free from external lines. In addition, this procedure of 'complete normal ordering' (which is an extension of the standard field theory definition of normal ordering) reduces by a substantial factor the number of Feynman diagrams to be calculated at any given loop order. We illustrate explicitly the complete normal ordering procedure and the cancellation of cephalopod diagrams in scalar field theories with non-derivative interactions, and by using a point splitting 'trick' we extend this result to theories with derivative interactions, such as those appearing as non-linear σ-models in the world-sheet formulation of string theory. We focus here on theories with trivial vacua, generalising the discussion to non-trivial vacua in a follow-up paper.

  2. Complete normal ordering 1: Foundations

    Directory of Open Access Journals (Sweden)

    John Ellis

    2016-08-01

    Full Text Available We introduce a new prescription for quantising scalar field theories (in generic spacetime dimension and background perturbatively around a true minimum of the full quantum effective action, which is to ‘complete normal order’ the bare action of interest. When the true vacuum of the theory is located at zero field value, the key property of this prescription is the automatic cancellation, to any finite order in perturbation theory, of all tadpole and, more generally, all ‘cephalopod’ Feynman diagrams. The latter are connected diagrams that can be disconnected into two pieces by cutting one internal vertex, with either one or both pieces free from external lines. In addition, this procedure of ‘complete normal ordering’ (which is an extension of the standard field theory definition of normal ordering reduces by a substantial factor the number of Feynman diagrams to be calculated at any given loop order. We illustrate explicitly the complete normal ordering procedure and the cancellation of cephalopod diagrams in scalar field theories with non-derivative interactions, and by using a point splitting ‘trick’ we extend this result to theories with derivative interactions, such as those appearing as non-linear σ-models in the world-sheet formulation of string theory. We focus here on theories with trivial vacua, generalising the discussion to non-trivial vacua in a follow-up paper.

  3. Complete graph model for community detection

    Science.gov (United States)

    Sun, Peng Gang; Sun, Xiya

    2017-04-01

    Community detection brings plenty of considerable problems, which has attracted more attention for many years. This paper develops a new framework, which tries to measure the interior and the exterior of a community based on a same metric, complete graph model. In particular, the exterior is modeled as a complete bipartite. We partition a network into subnetworks by maximizing the difference between the interior and the exterior of the subnetworks. In addition, we compare our approach with some state of the art methods on computer-generated networks based on the LFR benchmark as well as real-world networks. The experimental results indicate that our approach obtains better results for community detection, is capable of splitting irregular networks and achieves perfect results on the karate network and the dolphin network.

  4. Drilling and well technology

    Energy Technology Data Exchange (ETDEWEB)

    Milheim, K. [Mining University Leoben Institute for Drilling Technology, (Austria)

    1996-12-31

    Over a billion dollars a year is lost by exploration and production companies drilling wells because of the lack of learn curve management (LMC) practices. This paper presents the importance of the LMC concept, what it is, why LMC has not yet been recognized as a major initiative for improving drilling cost performance. The paper discusses the different types of planning, problems with implementation of plans, the use and misuse of drilling results and data bases, and the lack of post analysis practices. The major point of the paper is to show the massive savings that can be achieved by valuing LMC, learning LMC and successfully implementing LMC. . 2 refs., 5 figs.

  5. Quantum well lasers

    CERN Document Server

    Zory, Jr, Peter S; Kelley, Paul

    1993-01-01

    This book provides the information necessary for the reader to achieve a thorough understanding of all aspects of QW lasers - from the basic mechanism of optical gain, through the current technolgoical state of the art, to the future technologies of quantum wires and quantum dots. In view of the growing importance of QW lasers, this book should be read by all those with an active interest in laser science and technology, from the advanced student to the experienced laser scientist.* The first comprehensive book-length treatment of quantum well lasers* Provides a detailed treatment

  6. WellBe手环

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    来认识一下WellBe,一只能随时探测你精神压力状态,并立即提供解决建议的手环。WellBe判断佩戴者心理压力的依据是内藏的光学心率计所提供的实时测量值,在统计过最容易使佩戴者产生心理压力的场合后,为其提供量身定制的压力释放方式——包括冥思、深呼吸、引导想象,或是个性化过的学习课程或音乐播放列表。而它采用的软木腕带材质也在作出拥抱大自然,告别紧张快节奏的日常生活的暗示。

  7. Modeling Quantum Well Lasers

    Directory of Open Access Journals (Sweden)

    Dan Alexandru Anghel

    2012-01-01

    Full Text Available In semiconductor laser modeling, a good mathematical model gives near-reality results. Three methods of modeling solutions from the rate equations are presented and analyzed. A method based on the rate equations modeled in Simulink to describe quantum well lasers was presented. For different signal types like step function, saw tooth and sinus used as input, a good response of the used equations is obtained. Circuit model resulting from one of the rate equations models is presented and simulated in SPICE. Results show a good modeling behavior. Numerical simulation in MathCad gives satisfactory results for the study of the transitory and dynamic operation at small level of the injection current. The obtained numerical results show the specific limits of each model, according to theoretical analysis. Based on these results, software can be built that integrates circuit simulation and other modeling methods for quantum well lasers to have a tool that model and analysis these devices from all points of view.

  8. Quantum well nonlinear microcavities

    Science.gov (United States)

    Oudar, J. L.; Kuszelewicz, R.; Sfez, B.; Pellat, D.; Azoulay, R.

    We report on recent progress in reducing the power threshold of all-optical bistable quantum well vertical microcavities. Significant improvements are achieved through an increase of the cavity finesse, together with a reduction of the device active layer thickness. A critical intensity of 5 μW/μm 2 has been observed on a microcavity of finesse 250, with a nonlinear medium of only 18 GaAs quantum wells of 10 nm thickness. Further improvements of the Bragg mirror quality resulted in a finesse of 700 and a power-lifetime product of 15 fJ/μm 2. Microresonator pixellation allows to obtain 2-dimensional arrays. A thermally-induced alloy-mixing technique is described, which produced a 110 meV carrier confinement energy, together with a refractive index change of -.012, averaged over the 2.6 μm nonlinear medium thickness. The resulting electrical and optical confinement is shown to improve the nonlinear characteristics, by limiting lateral carrier diffusion and light diffraction.

  9. Reservoir and production engineering aspects of slim-hole wells

    Energy Technology Data Exchange (ETDEWEB)

    Azari, Mehdi; Soliman, Mohamed; Pacheco, Eduardo [Halliburton Energy Services (United States)

    1994-12-31

    The purpose of this article is to provide insight into the reservoir and production engineering aspects of reservoirs with well bore and completion string diameters less than conventionally drilled and completed wells. In addition it will provide an answer to the question: `when should you hydraulically fracture a slim-hole well?` (author) 10 refs., 8 figs., 18 tabs.

  10. Nim on the Complete Graph

    CERN Document Server

    Erickson, Lindsay

    2010-01-01

    The game of Nim as played on graphs was introduced in Nim on Graphs I and extended in Nim on Graphs II by Masahiko Fukuyama. His papers detail the calculation of Grundy numbers for graphs under specific circumstances. We extend these results and introduce the strategy for even cycles. This paper examines a more general class of graphs by restricting the edge weight to one. We provide structural conditions for which there exist a winning strategy. This yields the solution for the complete graph.

  11. Scarf is Ppad-Complete

    CERN Document Server

    Kintali, Shiva

    2008-01-01

    Scarf's lemma is one of the fundamental results in combinatorics, originally introduced to study the core of an N-person game. Over the last four decades, the usefulness of Scarf's lemma has been demonstrated in several important combinatorial problems. However, the complexity of the computational version of Scarf's lemma (SCARF) is unknown. In this paper, we prove that SCARF is complete for the complexity class PPAD. In other words, there is no polynomial-time algorithm for SCARF unless PPAD is a subset of P.

  12. Completely positive maps with memory

    CERN Document Server

    Daffer, S; Cresser, J D; McIver, J K; Daffer, Sonja; Wodkiewicz, Krzysztof; Cresser, James D.; Iver, John K. Mc

    2003-01-01

    The prevailing description for dissipative quantum dynamics is given by the Lindblad form of a Markovian master equation, used under the assumption that memory effects are negligible. However, in certain physical situations, the master equation is essentially of a non-Markovian nature. This paper examines master equations that possess a memory kernel, leading to a replacement of white noise by colored noise. The conditions under which this leads to a completely positive, trace-preserving map are discussed for an exponential memory kernel. A physical model that possesses such an exponential memory kernel is presented. This model contains a classical, fluctuating environment based on random telegraph signal stochastic variables.

  13. Projective modules and complete intersections

    CERN Document Server

    Mandal, Satya

    1997-01-01

    In these notes on "Projective Modules and Complete Intersections" an account on the recent developments in research on this subject is presented. The author's preference for the technique of Patching isotopic isomorphisms due to Quillen, formalized by Plumsted, over the techniques of elementary matrices is evident here. The treatment of Basic Element theory here incorporates Plumstead's idea of the "generalized dimension functions". These notes are highly selfcontained and should be accessible to any graduate student in commutative algebra or algebraic geometry. They include fully self-contained presentations of the theorems of Ferrand-Szpiro, Cowsik-Nori and the techniques of Lindel.

  14. Strong Completeness for Markovian Logics

    DEFF Research Database (Denmark)

    Kozen, Dexter; Mardare, Radu Iulian; Panangaden, Prakash

    2013-01-01

    In this paper we present Hilbert-style axiomatizations for three logics for reasoning about continuous-space Markov processes (MPs): (i) a logic for MPs defined for probability distributions on measurable state spaces, (ii) a logic for MPs defined for sub-probability distributions and (iii) a logic...... defined for arbitrary distributions. These logics are not compact so one needs infinitary rules in order to obtain strong completeness results. We propose a new infinitary rule that replaces the so-called Countable Additivity Rule (CAR) currently used in the literature to address the problem of proving...

  15. Kinematically complete chemical reaction dynamics

    Science.gov (United States)

    Trippel, S.; Stei, M.; Otto, R.; Hlavenka, P.; Mikosch, J.; Eichhorn, C.; Lourderaj, U.; Zhang, J. X.; Hase, W. L.; Weidemüller, M.; Wester, R.

    2009-11-01

    Kinematically complete studies of molecular reactions offer an unprecedented level of insight into the dynamics and the different mechanisms by which chemical reactions occur. We have developed a scheme to study ion-molecule reactions by velocity map imaging at very low collision energies. Results for the elementary nucleophilic substitution (SN2) reaction Cl- + CH3I → ClCH3 + I- are presented and compared to high-level direct dynamics trajectory calculations. Furthermore, an improved design of the crossed-beam imaging spectrometer with full three-dimensional measurement capabilities is discussed and characterization measurements using photoionization of NH3 and photodissociation of CH3I are presented.

  16. Bounds for Completely Decomposable Jacobians

    CERN Document Server

    Duursma, Iwan

    2010-01-01

    A curve over the field of two elements with completely decomposable Jacobian is shown to have at most six rational points and genus at most 26. The bounds are sharp. The previous upper bound for the genus was 145. We also show that a curve over the field of $q$ elements with more than $q^{m/2}+1$ rational points has at least one Frobenius angle in the open interval $(\\pi/m,3\\pi/m)$. The proofs make use of the explicit formula method.

  17. Well maintenance evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.

    1978-10-01

    The ground-water monitoring program is an integral part of the total environmental surveillance program for the Hanford Site. Extensive ground-water data have been collected and studied over the past several decades. All of this data is, of course, dependent upon the quality of the ground-water sampling structures. A program to upgrade the quality of ground-water sampling was initiated in early 1974. That program also included changes to avoid cross-contamination of ground-water samples by installing permanently mounted individual pumps in many of the sampling wells. These two programs have resulted in increased reliability of both the ground-water samples and the analytical data. This basic quality assurance effort has provided a high level of confidence in ground-water surveillance. The current program is providing data with reliabilities not previously attainable.

  18. LCDD: A complete detector description package

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman, E-mail: Norman.Graf@slac.stanford.edu; McCormick, Jeremy, E-mail: Jeremy.McCormick@slac.stanford.edu

    2015-07-21

    LCDD has been developed to provide a complete detector description package for physics detector simulations using Geant4. All aspects of the experimental setup, such as the physical geometry, magnetic fields, and sensitive detector readouts, as well as control of the physics simulations, such as physics processes, interaction models and kinematic limits, are defined at runtime. Users are therefore able to concentrate on the design of the detector system without having to master the intricacies of C++ programming or being proficient in setting up their own Geant4 application. We describe both the XML-based file format and the processors which communicate this information to the underlying Geant4 simulation toolkit.

  19. SPS completes LS1 activities

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    On 27 June, the SPS closed its doors to the LS1 engineers, bringing to an end almost 17 months of activities. The machine now enters the hardware-testing phase in preparation for an October restart.   Photo 1: The SPS transfer tunnel, TT10, reinforced with steal beams. Having completed their LS1 activities right on schedule (to the day!), the SPS team is now preparing the machine for its restart. Over the next eight weeks, hardware tests of the SPS dipole and quadrupole power converters will be underway, led by the TE-EPC (Electrical Power Converters) team. "OP start-up test activities will also be running in parallel, utilising the off hours when EPC is not using the machine," says David McFarlane, the SPS technical coordinator from the Engineering Department. "The primary beam testing phase will start at the beginning of September, once hardware tests and DSO safety tests have been completed." It has been a long journey to this point, with several major...

  20. AEgIS installation completed

    CERN Multimedia

    Katarina Anthony

    2012-01-01

    Gravity. Despite first being described over three centuries ago, it remains one of the least understood of the fundamental forces explored by physicists. At CERN’s recently completed AEgIS experiment, a team has set out to examine the effect of gravity on an as-yet-uncharted realm: antimatter.   The complete AEgIS set-up. Located in the AD hall, the AEgIS experiment plans to  make the first direct measurement of Earth’s gravitation effect on antimatter. By sending a beam of antihydrogen atoms through very thin gratings, the experiment will be able to measure how far the antihydrogen atoms fall and in how much time – giving the AEgIS team a measurement of the gravitational coupling. “By the end of 2012, we had finished by putting all the elements of the experiment together,” explains Michael Doser, AEgIS Spokesperson. “Now we have to show that they can all work together and, unfortunately, we will have no antiproton beams fo...

  1. LHCf completes its first run

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    LHCf, one of the three smaller experiments at the LHC, has completed its first run. The detectors were removed last week and the analysis of data is continuing. The first results will be ready by the end of the year.   One of the two LHCf detectors during the removal operations inside the LHC tunnel. LHCf is made up of two independent detectors located in the tunnel 140 m either side of the ATLAS collision point. The experiment studies the secondary particles created during the head-on collisions in the LHC because they are similar to those created in a cosmic ray shower produced when a cosmic particle hits the Earth’s atmosphere. The focus of the experiment is to compare the various shower models used to estimate the primary energy of ultra-high-energy cosmic rays. The energy of proton-proton collisions at the LHC will be equivalent to a cosmic ray of 1017eV hitting the atmosphere, very close to the highest energies observed in the sky. “We have now completed the fir...

  2. Completion of the TRT Barrel

    CERN Multimedia

    Gagnon, P

    On February 3, the US-TRT team proudly completed the installation of the 96th barrel TRT module on its support structure in the SR building at CERN. This happy event came after many years of R&D initiated in the nineties by the TA1 team at CERN, followed by the construction of the modules in three American institutes (Duke, Hampton and Indiana Universities) from 1996 to 2003. In total, the 96 barrel modules contain 52544 kapton straws, each 4 mm in diameter and strung with a 30 micron gold-plated tungsten wire. Each wire was manually inserted, a feat in itself! The inner layer modules contain 329 straws, the middle layer modules have 520 straws and the outer layer, 793 straws. Thirty- two modules of each type form a full layer. Their special geometry was designed such as to leave no dead region. On average, a particle will cross 36 straws. Kirill Egorov, Chuck Mahlon and John Callahan inserted the last module in the Barrel Support Structure. After completion in the US, all modules were transferred...

  3. CAVITY LIKE COMPLETIONS IN WEAK SANDS PREFERRED UPSTREAM MANAGEMENT PRACTICES

    Energy Technology Data Exchange (ETDEWEB)

    Ian Palmer; John McLennan

    2004-04-30

    The technology referred to as Cavity Like Completions (CLC) offers a new technique to complete wells in friable and unconsolidated sands. A successfully designed CLC provides significant increases in well PI (performance index) at lower costs than alternative completion techniques. CLC technology is being developed and documented by a partnership of major oil and gas companies through a GPRI (Global Petroleum Research Institute) joint venture. Through the DOE-funded PUMP program, the experiences of the members of the joint venture will be described for other oil and gas producing companies. To date six examples of CLC completions have been investigated by the JV. The project was performed to introduce a new type of completion (or recompletion) technique to the industry that, in many cases, offers a more cost effective method to produce oil and gas from friable reservoirs. The project's scope of work included: (1) Further develop theory, laboratory and field data into a unified model to predict performance of cavity completion; (2) Perform at least one well test for cavity completion (well provided by one of the sponsor companies); (3) Provide summary of geo-mechanical models for PI increase; and (4) Develop guidelines to evaluate success of potential cavity completion. The project tracks the experiences of a joint industry consortium (GPRI No. 17) over a three year period and compiles results of the activities of this group.

  4. Proposed technique for fabricating complete denture

    Directory of Open Access Journals (Sweden)

    Abdulsalam Ali Zwiad

    2012-01-01

    Full Text Available Introduction: Reduction of the visits for fabricating complete dentures are welcomed by both dentists and patients and this might be an aspect of the new changes in prosthodontic treatment according to the suggested new methods. Clinical Innovation: Complete dentures fabricated by the technique described in this report reduce processing time, cost and efforts since the technique does not require the use of gypsum materials, metal flasks or other related materials to obtain a mold for packing the heat cured acrylic resin as might be needed with the conventional method. This method requires only an appropriate volume of silicone impression material to provide the required mold and a heat pressure machine for processing and polymerization of the heat-cured acrylic resin. Although this technique might be difficult to be applicable by all dentist but it could be consider an advisable method. Discussion: Because the record base in this technique is made of heat cured resin, it provides a reliable denture base with better retention and stability and it overcomes the shortcomings that may be faced during registration of vertical dimension. This technique meets the basic requirements for a successful complete denture which is well tolerated by the patient′s mouth.

  5. Dual Enrollment, Structural Reform, and the Completion Agenda

    Science.gov (United States)

    Karp, Melinda Mechur

    2015-01-01

    This chapter contextualizes and extends the previous chapters by addressing the intertwined issues of structural systems reform and college completion, as well as the role dual enrollment can play in ensuring equitable postsecondary outcomes for underrepresented students.

  6. Dual Enrollment, Structural Reform, and the Completion Agenda

    Science.gov (United States)

    Karp, Melinda Mechur

    2015-01-01

    This chapter contextualizes and extends the previous chapters by addressing the intertwined issues of structural systems reform and college completion, as well as the role dual enrollment can play in ensuring equitable postsecondary outcomes for underrepresented students.

  7. Abandoning wells working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The primary objective of this working group is to identify major technical, regulatory, and environmental issues that are relevant to the abandonment of offshore wellbores. Once the issues have been identified, the working group also has the objective of making recommendations or providing potential solutions for consideration. Areas for process improvement will be identified and {open_quotes}best practices{close_quotes} will be discussed and compared to {open_quotes}minimum standards.{close_quotes} The working group will primarily focus on wellbore abandonment in the Gulf of Mexico. However, workshop participants are encouraged to discuss international issues which may be relevant to wellbore abandonment practices in the Gulf of Mexico. The Abandoning Wells Group has identified several major areas for discussion that have concerns related to both operators and service companies performing wellbore abandonments in the Gulf of Mexico. The following broad topics were selected for the agenda: (1) MMS minimum requirements and state regulations. (2) Co-existence of best practices, new technology, and P & A economics. (3) Liability and environmental issues relating to wellbore abandonment.

  8. Stability of Geodesically Complete Cosmologies

    CERN Document Server

    Creminelli, Paolo; Santoni, Luca; Trincherini, Enrico

    2016-01-01

    We study the stability of spatially flat FRW solutions which are geodesically complete, i.e. for which one can follow null (graviton) geodesics both in the past and in the future without ever encountering singularities. This is the case of NEC-violating cosmologies such as smooth bounces or solutions which approach Minkowski in the past. We study the EFT of linear perturbations around a solution of this kind, including the possibility of multiple fields and fluids. One generally faces a gradient instability which can be avoided only if the operator $~^{(3)}{R} \\delta N~$ is present and its coefficient changes sign along the evolution. This operator (typical of beyond-Horndeski theories) does not lead to extra degrees of freedom, but cannot arise starting from any theory with second-order equations of motion. The change of sign of this operator prevents to set it to zero with a generalised disformal transformation.

  9. Stability of geodesically complete cosmologies

    Energy Technology Data Exchange (ETDEWEB)

    Creminelli, Paolo [Abdus Salam International Centre for Theoretical Physics (ICTP),Strada Costiera 11, Trieste, 34151 (Italy); Pirtskhalava, David [Institute of Physics, École Polytechnique Fédérale de Lausanne,Lausanne, CH-1015 (Switzerland); Santoni, Luca; Trincherini, Enrico [Scuola Normale Superiore,Piazza dei Cavalieri 7, Pisa, 56126 (Italy); INFN - Sezione di Pisa,Largo B. Pontecorvo 3, Pisa, 56100 (Italy)

    2016-11-22

    We study the stability of spatially flat FRW solutions which are geodesically complete, i.e. for which one can follow null (graviton) geodesics both in the past and in the future without ever encountering singularities. This is the case of NEC-violating cosmologies such as smooth bounces or solutions which approach Minkowski in the past. We study the EFT of linear perturbations around a solution of this kind, including the possibility of multiple fields and fluids. One generally faces a gradient instability which can be avoided only if the operator {sup (3)} RδN is present and its coefficient changes sign along the evolution. This operator (typical of beyond-Horndeski theories) does not lead to extra degrees of freedom, but cannot arise starting from any theory with second-order equations of motion. The change of sign of this operator prevents to set it to zero with a generalised disformal transformation.

  10. ER-12-1 completion report

    Energy Technology Data Exchange (ETDEWEB)

    Russell, C.E.; Gillespie, D.; Cole, J.C.; Drellack, S.L. [and others

    1996-12-01

    The objective of drillhole ER-12-1 was to determine the hydrogeology of paleozoic carbonate rocks and of the Eleana Formation, a regional aquitard, in an area potentially downgradient from underground nuclear testing conducted in nearby Rainier Mesa. This objective was addressed through the drilling of well ER-12-1 at N886,640.26 E640,538.85 Nevada Central Coordinates. Drilling of the 1094 m (3588 ft) well began on July 19, 1991 and was completed on October 17, 1991. Drilling problems included hole deviation and hole instability that prevented the timely completion of this borehole. Drilling methods used include rotary tri-cone and rotary hammer drilling with conventional and reverse circulation using air/water, air/foam (Davis mix), and bentonite mud. Geologic cuttings and geophysical logs were obtained from the well. The rocks penetrated by the ER-12-1 drillhole are a complex assemblage of Silurian, Devonian, and Mississippian sedimentary rocks that are bounded by numerous faults that show substantial stratigraphic offset. The final 7.3 m (24 ft) of this hole penetrated an unusual intrusive rock of Cretaceous age. The geology of this borehole was substantially different from that expected, with the Tongue Wash Fault encountered at a much shallower depth, paleozoic rocks shuffled out of stratigraphic sequence, and the presence of an altered biotite-rich microporphyritic igneous rock at the bottom of the borehole. Conodont CAI analyses and rock pyrolysis analyses indicate that the carbonate rocks in ER-12-1, as well as the intervening sheets of Eleana siltstone, have been thermally overprinted following movement on the faults that separate them. The probable source of heat for this thermal disturbance is the microporphyritic intrusion encountered at the bottom of the hole, and its age establishes that the major fault activity must have occurred prior to 102.3+0.5 Ma (middle Cretaceous).

  11. Towards Understanding Methane Emissions from Abandoned Wells

    Science.gov (United States)

    Reconciliation of large-scale top-down methane measurements and bottom-up inventories requires complete accounting of source types. Methane emissions from abandoned oil and gas wells is an area of uncertainty. This presentation reviews progress to characterize the potential inv...

  12. Thermodynamics a complete undergraduate course

    CERN Document Server

    Steane, Andrew M

    2016-01-01

    This is an undergraduate textbook in thermodynamics—the science of heat, work, temperature, and entropy. The text presents thermodynamics in and of itself, as an elegant and powerful set of ideas and methods. These methods open the way to understanding a very wide range of phenomena in physics, chemistry, engineering, and biology. Starting out from an introduction of concepts at first year undergraduate level, the roles of temperature, internal energy, and entropy are explained via the laws of thermodynamics. The text employs a combination of examples, exercises, and careful discussion, with a view to conveying the feel of the subject as well as avoiding common misunderstandings. The Feynman–Smuluchowski ratchet, Szilard’s engine, and Maxwell’s daemon are used to elucidate entropy and the second law. Free energy and thermodynamic potentials are discussed at length, with applications to solids as well as fluids and flow processes. Thermal radiation is discussed, and the main ideas significant to global...

  13. Self Completeness of Einstein Gravity

    CERN Document Server

    Dvali, Gia

    2010-01-01

    We argue, that in Einsteinian gravity the Planck length is the shortest length of nature, and any attempt of resolving trans-Planckian physics bounces back to macroscopic distances due to black hole formation. In Einstein gravity trans-Planckian propagating quantum degrees of freedom cannot exist, instead they are equivalent to the classical black holes that are fully described by lighter infra-red degrees of freedom and give exponentially-soft contribution into the virtual processes. Based on this property we argue that pure-Einstein (super)gravity and its high-dimensional generalizations are self-complete in deep-UV, but not in standard Wilsonian sense. We suggest that certain strong-coupling limit of string theory is built-in in pure Einstein gravity, whereas the role of weakly-coupled string theory limit is to consistently couple gravity to other particle species, with their number being set by the inverse string coupling. We also discuss some speculative ideas generalizing the notion of non-Wilsonian sel...

  14. ATLAS Magnet System Nearing Completion

    CERN Document Server

    ten Kate, H H J

    2008-01-01

    The ATLAS Detector at the Large Hadron Collider at CERN is equipped with a superconducting magnet system that consists of a Barrel Toroid, two End-Cap Toroids and a Central Solenoid. The four magnets generate the magnetic field for the muon- and inner tracking detectors, respectively. After 10 years of construction in industry, integration and on-surface tests at CERN, the magnets are now in the underground cavern where they undergo the ultimate test before data taking in the detector can start during the course of next year. The system with outer dimensions of 25 m length and 22 m diameter is based on using conduction cooled aluminum stabilized NbTi conductors operating at 4.6 K and 20.5 kA maximum coil current with peak magnetic fields in the windings of 4.1 T and a system stored magnetic energy of 1.6 GJ. The Barrel Toroid and Central Solenoid were already successfully charged after installation to full current in autumn 2006. This year the system is completed with two End Cap Toroids. The ultimate test of...

  15. Heavy duty complete extension slides

    Science.gov (United States)

    Bueno, José Ignacio; Vázquez, Javier

    2001-09-01

    The selection from available commercial market of a set of slides to be used in an habitable pressurised module in space, to draw a 660 mm box out of a rack, up to a completely extracted position in a safely supported configuration, seems in principle not to be a complicated task. That was the first approach taken in the design process of the telescopic guides of the Crew Work Bench (CWB) included in the Fluid Science Laboratory (FSL), part of "ESA Microgravity Facilities for Columbus" within the Columbus Orbital Facility (COF) of the International Space Station (ISS). Nevertheless, common space compatible requirements such as materials, specific environmental loads, available envelope, total weight, etc., can make the selection of telescopic slides from commercial market unfeasible. A specific development to design space compatible telescopic slides for the CWB was undertaken. A set of heavy duty space compatible telescopic slides were designed, manufactured and tested. They should be operative in both, 1-g environment and in orbit, and additionally should withstand an inadvertent astronaut kick or bump of 556 N in any direction.

  16. Towards a complete World Glacier Inventory

    Science.gov (United States)

    Zemp, Michael

    2013-04-01

    The need for an inventory of the world's glaciers evolved during the International Hydrological Decade (1965-74). As a result, guidelines were established in the mid 1970s to compile a worldwide detailed inventory of existing perennial snow and ice masses. Following these international guidelines, several countries started compiling national glacier inventories based primarily on aerial photographs and maps. In the 1980s, the World Glacier Inventory (WGI) database was launched together with a status report about global and regional glacierised surface areas for the second half of the 20th century. These estimates were based on the detailed inventory data together with preliminary estimates of the remaining glacierised regions derived from early satellite imagery. In the late 1990s, the Global Land Ice Measurements from Space (GLIMS) database was initiated to continue the inventory task with space-borne sensors. In the WGI, glaciers are represented by geographical point coordinates. The GLIMS database includes digital outlines. Both include exact time stamps and tabular information on glacier classifications, length, area, orientation, and altitude range. Both are regularly updated with newly available data: the WGI stores point information for the second half of the 20th century whereas the GLIMS includes digital outlines for the 21st century. Since these detailed glacier inventories are not (yet) globally complete, there have been several efforts towards preliminary estimates of the overall global glacier coverage. A first, well elaborated one was included in the original status report of the WGI, published in 1989, and was refined in 2005 with information from other sources by Dyurgerov and Meier. Other studies used the detailed WGI, or an extended format by Cogley, for regional or global up-scaling of glacier extents. In 2003, Cogley published a global map of percentage glacier coverage per 1°x1° grid box (GGHydro) that is widely used for modeling at global

  17. Subsea building blocks for slender wells

    Energy Technology Data Exchange (ETDEWEB)

    Sabedotti, Sergio

    2010-07-01

    Reduce the Life Cycle Cost (LCC), IOR and improve HSE are fundamental aspects in future subsea field developments. The SBB (Subsea Building Blocks) is an R D effort from Statoil and Aker Solutions to investigate and develop new technology that can allow the industry to achieve these objectives. One important aspect of this initiative is well construction and reduced rig time for drilling, completion and intervention of subsea wells. To enable a slender system and increase the operational flexibility, well equipment (WH, XMT) has been analyzed and redesigned. (Author)

  18. Completely Described Undirected Graph Structure

    Directory of Open Access Journals (Sweden)

    G. S. Ivanova

    2016-01-01

    Full Text Available The objects of research are undirected graphs. The paper considers a problem of their isomorphism. A literature analysis of its solution, has shown that there is no way to define a complete graph invariant in the form of unique structural characteristics of each its vertex, which has a computational complexity of definition better than О (n 4 .The work objective is to provide the characteristics of the graph structure, which could be used to solve the problem of their isomorphism for a time better than О (n 4 . As such characteristics, the paper proposes to use the set of codes of tree roots of all the shortest - in terms of the number of edges - paths from each vertex to the others, uniquely defining the structure of each tree. It proves the theorem that it is possible to reduce the problem of isomorphism of the undirected graphs to the isomorphism problem of their splitting into the trees of all the shortest - in terms of the number of edges - paths of each vertex to the others. An algorithm to construct the shortest paths from each vertex to all others and to compute codes of their vertices has been developed. As the latter, are used Aho-codes, which find application in recognising the isomorphism of trees. The computational complexity to obtain structural characteristics of vertices has been estimated to be about О (n 3 .The pilot studies involved the full-scale experiment using the developed complex programmes to generate raw data, i.e. analytic representation of the graph with the number of vertices equal to 1200, and a programme to provide codes of the tree roots. To have an estimate of - "the worst" in terms of time - complexity of expansion algorithm of graphs into trees of the shortest paths and define the codes of their roots has been an experimentally studied how the number of tree vertices depends on the graph density. For the worst case was obtained a dependence of the number of tree vertices on the number of graph vertices

  19. Complete mesocolic excision: Techniques and outcomes

    Institute of Scientific and Technical Information of China (English)

    Nikoletta; Dimitriou; John; Griniatsos

    2015-01-01

    Complete mesocolic excision(CME) for the treatment of colon cancer was first introduced in the West in 2008. The first aim of this procedure is to remove the afflicted colon and its accessory lymphovascular supply by resecting the colon and mesocolon in an intact envelope of visceral peritoneum, which holds potentiallyinvolved lymph nodes. The second component of CME is a central vascular tie to remove completely all lymph nodes in the central(vertical) direction. In its original iteration, CME was performed via laparotomy, although many centers preferentially perform laparoscopic surgery, with its associated benefits and similar oncolo-gical outcomes, as the standard treatment for colonic cancer. Here, we present the surgical techniques for CME in open and laparoscopic surgery, as well as the surgical, pathological and oncological outcomes of the procedure that are available to date. Because there are no randomized control trials comparing CME to "standard" colon surgery, the principles underlying CME seem anatomical and logical, and the results published from the Far East, reporting an 80% 5-year survival rate for Stage III cancer, should guide us.

  20. Strong Completeness of Medium Logic System

    Institute of Scientific and Technical Information of China (English)

    Pan Zhenghua; Zhu Wujia

    2005-01-01

    The strong completeness of medium logic system is discussed. The following results are proved: medium propositional logic system MP and its extension MP * are strong complete; medium predicate logic system MF and its extensions ( MF * and ME * ) are not strong complete; and generally, if a consistent formal system is not strong complete, then any consistent extensions of this formai system are not strong complete either.

  1. Informationally complete quantum measurements & entanglement bounds

    Science.gov (United States)

    Flammia, Steven Thomas

    2007-12-01

    We define a class of measurements which we call pure-state informationally complete (PSI-complete) POVMs. These are measurements which can be used to reconstruct the pure state of a d-dimensional quantum system, but not necessarily a mixed state. We show that 2d measurement outcomes is necessary and sufficient for PSI-completeness. This demonstrates that the measurement complexity (as measured by the number of measurement outcomes) can achieve quadratic improvements when the system is confidently believed to be in a pure state. Next, we consider symmetric informationally complete POVMs (SIC-POVMs). SIC-POVMs are relevant for mixed state quantum tomography, but are not well understood. We prove a theorem related to the conjectured existence of SIC-POVMs showing the uniqueness (up to certain symmetries) of SIC-POVMs of a particular group-covariant type when the dimension of the Hilbert space is a prime number. In the second part of the dissertation, we consider a computational model that has access to only one pure qubit, along with n qubits in the totally mixed state. This model is thought to be capable of performing sonic computational tasks exponentially faster than any known classical algorithm. We show that circuits of this type generally lead to entangled states, but where the entanglement (as measured by the negativity) is bounded by a constant, independent of n, for all bipartite divisions. This suggests that the global nature of entanglement is a more important resource than the magnitude of the entanglement. We then consider multiply constrained bounds on entanglement measures based on convex constraint functions. We outline the general procedure, and then explicitly implement the program for the case of 4 x N quantum systems by bounding the entanglement of formation, the concurrence, and the tangle. Finally, we develop generalized bounds for quantum single-parameter estimation problems for which the coupling to the parameter is described by intrinsic multi

  2. Discriminant validity of well-being measures.

    Science.gov (United States)

    Lucas, R E; Diener, E; Suh, E

    1996-09-01

    The convergent and discriminant validities of well-being concepts were examined using multitrait-multimethod matrix analyses (D. T. Campbell & D. W. Fiske, 1959) on 3 sets of data. In Study 1, participants completed measures of life satisfaction, positive affect, negative affect, self-esteem, and optimism on 2 occasions 4 weeks apart and also obtained 3 informant ratings. In Study 2, participants completed each of the 5 measures on 2 occasions 2 years apart and collected informant reports at Time 2. In Study 3, participants completed 2 different scales for each of the 5 constructs. Analyses showed that (a) life satisfaction is discriminable from positive and negative affect, (b) positive affect is discriminable from negative affect, (c) life satisfaction is discriminable from optimism and self-esteem, and (d) optimism is separable from trait measures of negative affect.

  3. Application of Horizontal Well Technology to Liaohe Oilfield

    Institute of Scientific and Technical Information of China (English)

    HanYun

    2008-01-01

    @@ Horizontal well technology has become one of the main technologies enabling Liaohe Oilfield to realize stable development. By the end of 2006, 296 horizontal wells of various kinds had been completed in Liaohe Oil Field,273 wells had been put into production, Among uhich 237 were horizontal wells (see Table 1).

  4. Ultra Thin Quantum Well Materials

    Energy Technology Data Exchange (ETDEWEB)

    Dr Saeid Ghamaty

    2012-08-16

    This project has enabled Hi-Z technology Inc. (Hi-Z) to understand how to improve the thermoelectric properties of Si/SiGe Quantum Well Thermoelectric Materials. The research that was completed under this project has enabled Hi-Z Technology, Inc. (Hi-Z) to satisfy the project goal to understand how to improve thermoelectric conversion efficiency and reduce costs by fabricating ultra thin Si/SiGe quantum well (QW) materials and measuring their properties. In addition, Hi-Z gained critical new understanding on how thin film fabrication increases the silicon substrate's electrical conductivity, which is important new knowledge to develop critical material fabrication parameters. QW materials are constructed with alternate layers of an electrical conductor, SiGe and an electrical insulator, Si. Film thicknesses were varied, ranging from 2nm to 10nm where 10 nm was the original film thickness prior to this work. The optimum performance was determined at a Si and SiGe thickness of 4nm for an electrical current and heat flow parallel to the films, which was an important conclusion of this work. Essential new information was obtained on how the Si substrate electrical conductivity increases by up to an order of magnitude upon deposition of QW films. Test measurements and calculations are accurate and include both the quantum well and the substrate. The large increase in substrate electrical conductivity means that a larger portion of the electrical current passes through the substrate. The silicon substrate's increased electrical conductivity is due to inherent impurities and thermal donors which are activated during both molecular beam epitaxy and sputtering deposition of QW materials. Hi-Z's forward looking cost estimations based on future high performance QW modules, in which the best Seebeck coefficient and electrical resistivity are taken from separate samples predict that the electricity cost produced with a QW module could be achieved at <$0.35/W

  5. Quotient completion for the foundation of constructive mathematics

    CERN Document Server

    Maietti, Maria Emilia

    2012-01-01

    We apply some tools developed in categorical logic to give an abstract description of constructions used to formalize constructive mathematics in foundations based on intensional type theory. The key concept we employ is that of a Lawvere hyperdoctrine for which we describe a notion of quotient completion. That notion includes the exact completion on a category with weak finite limits as an instance as well as examples from type theory that fall apart from this.

  6. Tensor completion for PDEs with uncertain coefficients and Bayesian Update

    KAUST Repository

    Litvinenko, Alexander

    2017-03-05

    In this work, we tried to show connections between Bayesian update and tensor completion techniques. Usually, only a small/sparse vector/tensor of measurements is available. The typical measurement is a function of the solution. The solution of a stochastic PDE is a tensor, the measurement as well. The idea is to use completion techniques to compute all "missing" values of the measurement tensor and only then apply the Bayesian technique.

  7. Well data summary sheets. Vol. 27. Released wells from southern Jylland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This twenty-seventh volume of the `Well Data Summary sheets` includes data from wells in Southern Jutland. With the exception of Loegumkloster-2 all the included wells have been released and can be found in the previous volume (2,8,9,11,15 and 16). The primary purpose of producing this volume has been to update the previously released wells and produce them in our new format. Also this Volume 27 is one of several published or planned regional volumes including well data from onshore Denmark. Volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are in volumes 17-26 and 30. `Complete index of released wells in volumes 1-30` is included. Data references are made to the new revised volume and not to the original published reference. (au)

  8. The discovery of isotopes a complete compilation

    CERN Document Server

    Thoennessen, Michael

    2016-01-01

    This book describes the exciting discovery of every isotope observed on earth to date, which currently numbers some 3000. For each isotope a short essay highlights the authors of the first publication for the isotope, the laboratory and year where and when the isotope was discovered, as well as details about the production and detection methods used. In controversial cases previously claims are also discussed. At the end a comprehensive table lists all isotopes sorted by elements and a complete list of references. Preliminary versions of these paragraphs have been published over the last few years as separate articles in the journal "Atomic Data and Nuclear Data Tables". The work re-evaluates all assignments judging them with a uniform set of criteria. In addition, the author includes over 100 new isotopes which have been discovered since the articles published. This book is a source of information for researchers as well as enthusiastic laymen alike. From the prepublication review: “The explanations focus ...

  9. Computer modeling of complete IC fabrication process

    Science.gov (United States)

    Dutton, Robert W.

    1987-05-01

    The development of fundamental algorithms for process and device modeling as well as novel integration of the tools for advanced Integrated Circuit (IC) technology design is discussed. The development of the first complete 2D process simulator, SUPREM 4, is reported. The algorithms are discussed as well as application to local-oxidation and extrinsic diffusion conditions which occur in CMOS AND BiCMOS technologies. The evolution of 1D (SEDAN) and 2D (PISCES) device analysis is discussed. The application of SEDAN to a variety of non-silicon technologies (GaAs and HgCdTe) are considered. A new multi-window analysis capability for PISCES which exploits Monte Carlo analysis of hot carriers has been demonstrated and used to characterize a variety of silicon MOSFET and GaAs MESFET effects. A parallel computer implementation of PISCES has been achieved using a Hypercube architecture. The PISCES program has been used for a range of important device studies including: latchup, analog switch analysis, MOSFET capacitance studies and bipolar transient device for ECL gates. The program is broadly applicable to RAM and BiCMOS technology analysis and design. In the analog switch technology area this research effort has produced a variety of important modeling and advances.

  10. Private Well Water and Fluoride

    Science.gov (United States)

    ... well. What do I need to know about fluoride and groundwater from a well? Fluoride is present ... well has less than the recommended level of fluoride for preventing tooth decay? The recommended fluoride level ...

  11. Well data summary sheets. Vol. 25. North Sea Wells from outside the Central Graben area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This twenty-fifth volume of the `Well Data Summary sheets` together with volumes twenty-three, twenty-four and twenty-six which have been prepared concurrently, includes data from wells in the Danish North Sea. With the exception of Alma-1x well in volume 26 and the Gert-4 well in volume 23, all the included wells have been released and can be found in the previous volumes (1-16). The primary purpose of producing these four volumes (23-26) has been to update the previously released wells and produce them in our new format. With the new volumes 23, 24, and 26 together with well data from volumes 17, 18, and 19, all released wells from the Danish Central Graben are updated in our new format. Volume 25 includes Danish North sea wells from outside the Central Graben area. The Ibenholt-1 well and the Felicia-1/1A well included in this regional volume were previously included in volumes 21 and 20 respectively. Minor corrections have been made since the first edition. The `Complete index of released wells` had been updated. Volume 27, 28 and 29 are regional volumes; volume 27 includes well data from Southern Jutland; volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are included in volumes 17-26 and 30. Data references are made to the revised volumes and not to the original published reference. (au)

  12. Complete albinism in a Podarcis muralis newborn

    Directory of Open Access Journals (Sweden)

    Filippo Spadola

    2007-01-01

    Full Text Available The authors describe a case of complete albinism in a Podarcis muralis newborn, from Chieti (Abruzzo, central Italy in September 2004. This is the first complete albinism case in a Podarcis spp. In the world.

  13. Jacobi fields of completely integrable Hamiltonian systems

    Energy Technology Data Exchange (ETDEWEB)

    Giachetta, G.; Mangiarotti, L.; Sardanashvily, G

    2003-03-31

    We show that Jacobi fields of a completely integrable Hamiltonian system of m degrees of freedom make up an extended completely integrable system of 2m degrees of freedom, where m additional first integrals characterize a relative motion.

  14. Quantization of noncommutative completely integrable Hamiltonian systems

    CERN Document Server

    Giachetta, G; Sardanashvily, G

    2007-01-01

    Integrals of motion of a Hamiltonian system need not be commutative. The classical Mishchenko-Fomenko theorem enables one to quantize a noncommutative completely integrable Hamiltonian system around its invariant submanifold as an abelian completely integrable Hamiltonian system.

  15. Hanford well custodians. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Schatz, A.L.; Underwood, D.J.

    1995-02-02

    The Hanford Site Groundwater Protection Management Program recognized the need to integrate monitoring well activities in a centralized manner. A key factor to Hanford Site well integration was the need to clearly identify a responsible party for each of the wells. WHC was asked to identify all wells on site, the program(s) using each well, and the program ultimately responsible for the well. This report lists the custodian and user(s) for each Hanford well and supplies a comprehensive list of all decommissioned and orphaned wells on the Hanford Site. This is the first update to the original report released in December 1993.

  16. Personality dimensions and subjective well-being.

    Science.gov (United States)

    Chico Librán, Eliseo

    2006-05-01

    This work examines the association between personality dimensions (extraversion and neuroticism) and subjective well-being. Subjective well-being is associated both with extraversion and neuroticism, and currently, neuroticism is generally considered the more important. A total of 368 students from the University of Rovira i Virgili completed the Extraversion and Neuroticism subscales of the revised Eysenck Personality Questionnaire (Eysenck, Eysenck, and Barrett, 1985), the Satisfaction with Life Scale (SWLS; Diener, Emmons, Larsen, and Griffin, 1985), and the Positive and Negative Affect Scale (Watson, Clark, and Tellegen, 1988). Regression analyses revealed the personality variable of neuroticism as one of the most important correlates of subjective well-being. Regression analyses also showed that 44% of the variance of subjective well-being was accounted for by neuroticism, whereas extraversion only explained 8% of the variance.

  17. Measuring Homework Completion in Behavioral Activation

    Science.gov (United States)

    Busch, Andrew M.; Uebelacker, Lisa A.; Kalibatseva, Zornitsa; Miller, Ivan W.

    2010-01-01

    The aim of this study was to develop and validate an observer-based coding system for the characterization and completion of homework assignments during Behavioral Activation (BA). Existing measures of homework completion are generally unsophisticated, and there is no current measure of homework completion designed to capture the particularities…

  18. Isaac Newton and Student College Completion

    Science.gov (United States)

    Tinto, Vincent

    2013-01-01

    Success in college is built upon classroom success, but success in the classroom does not in itself ensure college completion. Completion arises from success in a sequence of classes one after another over time. It does so most frequently when students are presented with coherent course pathways to degree completion, are able to gain degree credit…

  19. Completion Mindsets and Contexts in Doctoral Supervision

    Science.gov (United States)

    Green, Pam; Bowden, John

    2012-01-01

    Purpose: Doctoral candidates are now located within a research context of performativity where the push to successfully complete in a timely manner is central. The purpose of this paper is to develop a model of completion mindset within a completion context to assist research students and supervisors. Design/methodology/approach: The research was…

  20. Completeness in quantum mechanics and the Weyl-Titchmarsh-Kodaira theorem

    Energy Technology Data Exchange (ETDEWEB)

    Palma, G [Departamento de Fisica, Universidad de Santiago de Chile, Casilla 307, Santiago 2 (Chile); Prado, H; Reyes, E G, E-mail: guillermo.palma@usach.c, E-mail: humberto.prado@usach.c, E-mail: ereyes@fermat.usach.c [Departamento de Matematica y Ciencia de la Computacion, Universidad de Santiago de Chile, Casilla 307 Correo 2, Santiago (Chile)

    2010-06-25

    We discuss the completeness of (generalized) eigenfunctions in quantum mechanics using the classical theory developed by Weyl, Titchmarsh, and Kodaira. As applications, we rigorously prove the completeness of generalized eigenfunctions for the step and well potentials.

  1. Wellness, Professional Quality of Life, and Career-Sustaining Behaviors: What Keeps Us Well?

    Science.gov (United States)

    Lawson, Gerard; Myers, Jane E.

    2011-01-01

    A sample of 506 professional counselors who were members of the American Counseling Association completed measures of professional quality of life, career-sustaining behaviors (CSBs), and wellness. Significant differences were found both within the sample based on caseload characteristics and between the participants and available norm groups.…

  2. Arsenic management through well modification and simulation

    Science.gov (United States)

    Halford, Keith J.; Stamos, Christina L.; Nishikawa, Tracy; Martin, Peter

    2010-01-01

    Arsenic concentrations can be managed with a relatively simple strategy of grouting instead of completely destroying a selected interval of well. The strategy of selective grouting was investigated in Antelope Valley, California, where groundwater supplies most of the water demand. Naturally occurring arsenic typically exceeds concentrations of 10 (mu or u)g/L in the water produced from these long-screened wells. The vertical distributions of arsenic concentrations in intervals of the aquifer contributing water to selected supply wells were characterized with depth-dependent water-quality sampling and flow logs. Arsenic primarily entered the lower half of the wells where lacustrine clay deposits and a deeper aquifer occurred. Five wells were modified by grouting from below the top of the lacustrine clay deposits to the bottom of the well, which reduced produced arsenic concentrations to less than 2 (mu or u)g/L in four of the five wells. Long-term viability of well modification and reduction of specific capacity was assessed for well 4-54 with AnalyzeHOLE, which creates and uses axisymmetric, radial MODFLOW models. Two radial models were calibrated to observed borehole flows, drawdowns, and transmissivity by estimating hydraulicconductivity values in the aquifer system and gravel packs of the original and modified wells. Lithology also constrained hydraulic-conductivity estimates as regularization observations. Well encrustations caused as much as 2 (mu or u)g/L increase in simulated arsenic concentration by reducing the contribution of flow from the aquifer system above the lacustrine clay deposits. Simulated arsenic concentrations in the modified well remained less than 3 (mu or u)g/L over a 20-year period.

  3. Resonant Tunneling in Barrier-in-Well and Well-in-Well Structures

    Institute of Scientific and Technical Information of China (English)

    YAO Jiang-Hong; JIA Guo-Zhi; ZHANG Yan; LI Wei-Wu; SHU Yong-Chun; WANG Zhan-Guo; XU Jing-Jun

    2008-01-01

    @@ A Schr(o)dinger equation is solved numerically for a barrier in a quantum well and a quantum well in another well structure by the transfer matrix technique.Effect of structure parameters on the transmission probabilities is investigated in detail.The results suggest that symmetry plays an important role in the coupling effect between the quantum wells.The relationship between the width of the inner well and the resonant energy levels in well-in-well structures is also studied.It is found that the ground state energy and the second resonant energy decrease with increasing width of the inner well, while the first resonant energy remains constant.

  4. Direct memory access transfer completion notification

    Science.gov (United States)

    Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

    2011-02-15

    DMA transfer completion notification includes: inserting, by an origin DMA engine on an origin node in an injection first-in-first-out (`FIFO`) buffer, a data descriptor for an application message to be transferred to a target node on behalf of an application on the origin node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying a packet header for a completion notification packet; transferring, by the origin DMA engine to the target node, the message in dependence upon the data descriptor; sending, by the origin DMA engine, the completion notification packet to a local reception FIFO buffer using a local memory FIFO transfer operation; and notifying, by the origin DMA engine, the application that transfer of the message is complete in response to receiving the completion notification packet in the local reception FIFO buffer.

  5. Raft River well stimulation experiments: geothermal reservoir well stimulation program

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The Geothermal Reservoir Well Stimulation Program (GRWSP) performed two field experiments at the Raft River KGRA in 1979. Wells RRGP-4 and RRGP-5 were selected for the hydraulic fracture stimulation treatments. The well selection process, fracture treatment design, field execution, stimulation results, and pre- and post-job evaluations are presented.

  6. The COMPLETE Survey of Outflows in Perseus

    CERN Document Server

    Arce, Hector G; Goodman, Alyssa A; Pineda, Jaime E; Halle, Michael W; 10.1088/0004-637X/715/2/1170

    2010-01-01

    We present a study on the impact of molecular outflows in the Perseus molecular cloud complex using the COMPLETE survey large-scale 12CO(1-0) and 13CO(1-0) maps. We used three-dimensional isosurface models generated in RA-DEC-Velocity space to visualize the maps. This rendering of the molecular line data allowed for a rapid and efficient way to search for molecular outflows over a large (~ 16 sq. deg.) area. Our outflow-searching technique detected previously known molecular outflows as well as new candidate outflows. Most of these new outflow-related high-velocity features lie in regions that have been poorly studied before. These new outflow candidates more than double the amount of outflow mass, momentum, and kinetic energy in the Perseus cloud complex. Our results indicate that outflows have significant impact on the environment immediately surrounding localized regions of active star formation, but lack the energy needed to feed the observed turbulence in the entire Perseus complex. This implies that oth...

  7. LS1 Report: Preparatory phase complete

    CERN Multimedia

    Katy Foraz

    2013-01-01

    The preparatory phase in the LHC which includes electrical and leak test is now completed. The field is now free for consolidation, upgrade and maintenance activities.   Three magnets have been replaced in sector 7-8 and a special intervention team is now connecting new magnets that have been installed. Two magnets of sector 1-2 will be exchanged this week. The R2E project is progressing well: the power converters are being removed at points 1 and 7, while the protection works required prior to any civil engineering works commencing are almost finished at point 5. Moreover, many other activities are taking place in LHC, including the consolidation of the cryo line, and the maintenance of radio-frequency systems and cabling. The activities in the injector complex are also in full gear. Sixteen magnets at the SPS are being exchanged, and the pick-up tank of AD is now back in place. Meanwhile, the PS cranes are being exchanged and the old PS ventilation system is being replaced. The interconnecti...

  8. Completely bounded norms of right module maps

    CERN Document Server

    Levene, Rupert H

    2011-01-01

    It is well-known that if T is a D_m-D_n bimodule map on the m by n complex matrices, then T is a Schur multiplier and $\\|T\\|_{cb}=\\|T\\|$. If n=2 and T is merely assumed to be a right D_2-module map, then we show that $\\|T\\|_{cb}=\\|T\\|$. However, this property fails if m>1 and n>2. For m>1 and n=3,4 or $n\\geq m^2$, we give examples of maps T attaining the supremum C(m,n)=\\sup \\|T\\|_{cb} taken over the contractive, right D_n-module maps on M_{m,n}, and we show that C(m,n) grows with m and n. As a consequence, if H is an infinite-dimensional Hilbert space and D is a masa in B(H), then there is a bounded right D-module map on the compact operators which is not completely bounded.

  9. Completed Local Ternary Pattern for Rotation Invariant Texture Classification

    Directory of Open Access Journals (Sweden)

    Taha H. Rassem

    2014-01-01

    Full Text Available Despite the fact that the two texture descriptors, the completed modeling of Local Binary Pattern (CLBP and the Completed Local Binary Count (CLBC, have achieved a remarkable accuracy for invariant rotation texture classification, they inherit some Local Binary Pattern (LBP drawbacks. The LBP is sensitive to noise, and different patterns of LBP may be classified into the same class that reduces its discriminating property. Although, the Local Ternary Pattern (LTP is proposed to be more robust to noise than LBP, however, the latter’s weakness may appear with the LTP as well as with LBP. In this paper, a novel completed modeling of the Local Ternary Pattern (LTP operator is proposed to overcome both LBP drawbacks, and an associated completed Local Ternary Pattern (CLTP scheme is developed for rotation invariant texture classification. The experimental results using four different texture databases show that the proposed CLTP achieved an impressive classification accuracy as compared to the CLBP and CLBC descriptors.

  10. CNLC Provides Well-Bore Technical Services Worldwide

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    @@ BRIEF INTRODUCTION of CNLC China National Logging Corporation (CNLC), a subsidiary of CNPC Services & Engineering Ltd.,which provides well bore technical services at international market solely on behalf of CNPC, is a specialized service company mainly engaged in: 1. Wire-line logging, mud logging, well testing,well completion, perforating and other relevant engineering services.

  11. China's Wellness Revolution

    Institute of Scientific and Technical Information of China (English)

    MarkGodfrey

    2004-01-01

    SEVERAL years after its publication, the Wellness Revolution remains a cult best-selling book. Its writer, businessman and motivational speaker Paul Zane Pilzer, advised investors and ama-teur stock market players that "wellness" would be the next tril-

  12. Creating Wellness in Your Schools.

    Science.gov (United States)

    Tager, Mark J.

    1983-01-01

    Wellness programs emphasize positive motivation and usually include health awareness campaigns, behavior change programs, and cost containment strategies. Guides are offered for beginning wellness programs in school districts. (MLF)

  13. School wellness team best practices to promote wellness policy implementation.

    Science.gov (United States)

    Profili, Erika; Rubio, Diana S; Lane, Hannah G; Jaspers, Lea H; Lopes, Megan S; Black, Maureen M; Hager, Erin R

    2017-08-01

    Schools with wellness teams are more likely to implement federally mandated Local Wellness Policies (LWPs, Local Education Agency-level policies for healthy eating/physical activity). Best practices have been developed for wellness teams based on minimal empirical evidence. The purpose of this study is to determine, among schools with wellness teams, associations between LWP implementation and six wellness team best practices (individually and as a sum score). An online survey targeting Maryland school wellness leaders/administrators (52.4% response rate, 2012-2013 school year) was administered that included LWP implementation (17-item scale: categorized as no, low, and high implementation) and six wellness team best practices. Analyses included multi-level multinomial logistic regression. Wellness teams were present in 311/707 (44.0%) schools, with no (19.6%), low (36.0%), and high (44.4%) LWP implementation. A sum score representing active wellness teams (mean=2.6) included: setting healthy eating/physical activity goals (66.9%), informing the public of LWP activities (71.4%), meeting ≥4times/year (45.8%), and having school staff (46.9%), parent (25.4%), or student (14.8%) representation. In adjusted models, goal setting, meeting ≥4times/year, and student representation were associated with high LWP implementation. For every one-unit increase in active wellness team sum score, schools were 41% more likely to be in high versus no implementation (Likelihood Ratio=1.41, 95% C.I.=1.13, 1.76). In conclusion, wellness teams meeting best practices are more likely to implement LWPs. Interventions should focus on the formation of wellness teams with recommended composition/activities. Study findings provide support for wellness team recommendations stemming from the 2016 Healthy, Hunger-Free Kids Act final rule. Copyright © 2017. Published by Elsevier Inc.

  14. Electronic Quantum Confinement in Cylindrical Potential Well

    CERN Document Server

    Baltenkov, A S

    2016-01-01

    The effects of quantum confinement on the momentum distribution of electrons confined within a cylindrical potential well have been analyzed. The motivation is to understand specific features of the momentum distribution of electrons when the electron behavior is completely controlled by the parameters of a non-isotropic potential cavity. It is shown that studying the solutions of the wave equation for an electron confined in a cylindrical potential well offers the possibility to analyze the confinement behavior of an electron executing one- or two-dimensional motion in the three-dimensional space within the framework of the same mathematical model. Some low-lying electronic states with different symmetries have been considered and the corresponding wave functions have been calculated; the behavior of their nodes and their peak positions with respect to the parameters of the cylindrical well has been analyzed. Additionally, the momentum distributions of electrons in these states have been calculated. The limi...

  15. HORIZONTAL WELL DRILL-IN FLUIDS

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    1998-12-01

    Full Text Available Main objective of horizontal driling is to place a drain-hole for a long distance within the pay zone to enhance productivity or injectivity. In drilling horizontal wells, more serious problems appear than in drilling vertical wells. These problems are: poor hole cleaning, excessive torque and drag, hole filling, pipe stucking, wellbore instability, loss of circulation, formation damage, poor cement job, and difficulties at logging jobs. From that reason, successful drilling and production of horizontal well depends largely on the fluid used during drilling and completion phases. Several new fluids, that fulfill some or all of required properties (hole cleaning, cutting suspension, good lubrication, and relative low formation damage, are presented in this paper.

  16. Geothermal well drilling manual at Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez P., A.; Flores S., M.

    1982-08-10

    The objective of the drilling manual is to solve all problems directly related to drilling during the construction of a well. In this case, the topics dealt which are drilling fluids and hydraulics to be applied in the field to improve drilling progress, eliminate risks and achieve good well-completion. There are other topics that are applicable such as drill bits and the drilling string, which are closely linked to drilling progress. On this occasion drilling fluid and hydraulics programs are presented, in addition to a computing program for a Casio FX-502P calculator to be applied in the field to optimize hydraulics and in the analysis of hydraulics for development and exploration wells at their different intervals.

  17. Identity Support, Identity Devaluation, and Well-Being among Lesbians

    Science.gov (United States)

    Beals, Kristin P.; Peplau, Letitia Anne

    2005-01-01

    This research tested predictions about the association of identity support and identity devaluation with psychological well-being (self-esteem, life satisfaction, and depression). Lesbian women completed baseline surveys (N=42), then provided daily experience reports during a 2-week period (n=38), and completed a 2-month follow-up survey (n=34).…

  18. Identity Support, Identity Devaluation, and Well-Being among Lesbians

    Science.gov (United States)

    Beals, Kristin P.; Peplau, Letitia Anne

    2005-01-01

    This research tested predictions about the association of identity support and identity devaluation with psychological well-being (self-esteem, life satisfaction, and depression). Lesbian women completed baseline surveys (N=42), then provided daily experience reports during a 2-week period (n=38), and completed a 2-month follow-up survey (n=34).…

  19. Insomnia and Well-Being

    Science.gov (United States)

    Hamilton, Nancy A.; Gallagher, Matthew W.; Preacher, Kristopher J.; Stevens, Natalie; Nelson, Christy A.; Karlson, Cynthia; McCurdy, Danyale

    2007-01-01

    Most Americans have occasional problems with insomnia. The relationship of insomnia to illness is well known. However, insomnia may also relate to lower levels of well-being. Although there are various definitions of well-being, one of the most clearly articulated and comprehensive models identifies 2 overarching constructs, psychological…

  20. Direct memory access transfer completion notification

    Science.gov (United States)

    Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

    2010-08-17

    Methods, apparatus, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA engine on an origin compute node in an injection FIFO buffer, a data descriptor for an application message to be transferred to a target compute node on behalf of an application on the origin compute node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying an address of a completion notification field in application storage for the application; transferring, by the origin DMA engine to the target compute node, the message in dependence upon the data descriptor; and notifying, by the origin DMA engine, the application that the transfer of the message is complete, including performing a local direct put operation to store predesignated notification data at the address of the completion notification field.

  1. Road Signs for UV-Completion

    CERN Document Server

    Dvali, Gia; Gomez, Cesar

    2012-01-01

    We confront the concepts of Wilsonian UV-completion versus self-completion by Classicalization in theories with derivatively-coupled scalars. We observe that the information about the UV-completion road is encoded in the sign of the derivative terms. We note that the sign of the derivative couplings for which there is no consistent Wilsonian UV-completion is the one that allows for consistent classicalons. This is an indication that for such a sign the vertex must be treated as fundamental and the theory self-protects against potential inconsistencies, such as superluminality, via self-completion by classicalization. Applying this reasoning to the UV-completion of the Standard Model, we see that the information about the Higgs versus classicalization is encoded in the sign of the scattering amplitude of longitudinal W-bosons. Negative sign excludes Higgs or any other weakly-coupled Wilsonian physics.

  2. A completion construction for continuous dynamical systems

    CERN Document Server

    Calcines, J M Garcia; Rodriguez, M T Rivas

    2012-01-01

    In this work we construct the $\\Co^{\\r}$-completion and $\\Co^{\\l}$-completion of a dynamical system. If $X$ is a flow, we construct canonical maps $X\\to \\Co^{\\r}(X)$ and $X\\to \\Co^{\\l}(X)$ and when these maps are homeomorphism we have the class of $\\Co^{\\r}$-complete and $\\Co^{\\l}$-complete flows, respectively. In this study we find out many relations between the topological properties of the completions and the dynamical properties of a given flow. In the case of a complete flow this gives interesting relations between the topological properties (separability properties, compactness, convergence of nets, etc.) and dynamical properties (periodic points, omega limits, attractors, repulsors, etc.).

  3. Barriers to Successful Treatment Completion in Child Sexual Abuse Survivors

    Science.gov (United States)

    McPherson, Paul; Scribano, Philip; Stevens, Jack

    2012-01-01

    Child sexual abuse (CSA) often requires psychological treatment to address the symptoms of victim trauma. Barriers to entry and completion of counseling services can compromise long-term well-being. An integrated medical and mental health evaluation and treatment model of a child advocacy center (CAC) has the potential to reduce barriers to mental…

  4. Checking Consistency of Pedigree Information is NP-complete

    DEFF Research Database (Denmark)

    Aceto, Luca; Hansen, Jens A.; Ingolfsdottir, Anna

    arose originally from the geneticists' need to filter their input data from erroneous information, and is well motivated from both a biological and a sociological viewpoint. This paper shows that consistency checking is NP-complete, even in the presence of three alleles. Several other results...

  5. Barriers to Successful Treatment Completion in Child Sexual Abuse Survivors

    Science.gov (United States)

    McPherson, Paul; Scribano, Philip; Stevens, Jack

    2012-01-01

    Child sexual abuse (CSA) often requires psychological treatment to address the symptoms of victim trauma. Barriers to entry and completion of counseling services can compromise long-term well-being. An integrated medical and mental health evaluation and treatment model of a child advocacy center (CAC) has the potential to reduce barriers to mental…

  6. A Complete Foliation of Schwarzschild Spacetime by Free Falling Hypersurfaces

    Institute of Scientific and Technical Information of China (English)

    M. Ayub Faridi; Amjad Pervez; Haris Rashid; Fazal-e-Aleem

    2006-01-01

    Free falling hypersurfaces in the Schwarzschild geometry have been studied to provide a complete foliation of spacetime. The hypersurfaces do not cross into the maximally extended spacetime and are well behaved everywhere except at the singularity r = 0 the mean extrinsic curvature becomes infinity.

  7. Complete Blood Count and Retinal Vessel Calibers

    OpenAIRE

    Gerald Liew; Jie Jin Wang; Elena Rochtchina; Tien Yin Wong; Paul Mitchell

    2014-01-01

    OBJECTIVE: The influence of hematological indices such as complete blood count on microcirculation is poorly understood. Retinal microvasculature can be directly visualized and vessel calibers are associated with a range of ocular and systemic diseases. We examined the association of complete blood count with retinal vessel calibers. METHODS: Cross-sectional population-based Blue Mountains Eye Study, n = 3009, aged 49+ years. Complete blood count was measured from fasting blood samples taken ...

  8. Rough Class on a Completely Distributive Lattice

    Institute of Scientific and Technical Information of China (English)

    陈德刚; 张文修; 宋士吉

    2003-01-01

    This paper generalizes the Pawlak rough set method to a completely distributive lattice. Theconcept of a rough set has many applications in data mining. The approximation operators on a completelydistributive lattice are studied, the rough class on a completely distributive lattice is defined and theexpressional theorems of the rough class are proven. These expressional theorems are used to prove that thecollection of all rough classes is an atomic completely distributive lattice.

  9. On Dedekind's problem for complete simple games

    CERN Document Server

    Kurz, Sascha

    2010-01-01

    We combine the parametric Barvinok algorithm with a generation algorithm for a finite list of suitably chosen discrete sub-cases on the enumeration of complete simple games, i.e. a special subclass of monotone Boolean functions. Recently, Freixas et al. have proven an enumeration formula for complete simple games with two types of voters. We will provide a shorter proof and an enumeration formula for complete simple games with two shift-minimal winning coalitions.

  10. Byzantine Vector Consensus in Complete Graphs

    Science.gov (United States)

    2013-02-11

    communication network is a complete graph. All the communication channels are reliable and FIFO (first-in-first-out). The problem of Byzantine vector...the communication network is a complete graph. All the communication channels are reliable and FIFO ( rst-in- rst-out). The problem of Byzantine...other directly on reliable FIFO (first-in first-out) channels. Thus, the communication network is a complete graph. The input vector at each process

  11. Counting Links and Knots in Complete Graphs

    CERN Document Server

    Abrams, Loren

    2010-01-01

    We investigate the minimal number of links and knots in complete partite graphs. We provide exact values or bounds on the minimal number of links for all complete partite graphs with all but 4 vertices in one partition, or with 9 vertices in total. In particular, we find that the minimal number of links for $K_{4,4,1}$ is 74. We also provide exact values or bounds on the minimal number of knots for all complete partite graphs with 8 vertices.

  12. Oil and Natural Gas Wells, Western U.S.

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A complete set of wells associated with oil, natural gas, and coal bed natural gas development in the western states as of June 2004. This is a static dataset even...

  13. The effects of stereoscopic depth on completion.

    Science.gov (United States)

    Takeichi, H

    1999-01-01

    Stereoscopic depth has a critical effect on completion of partially occluded figures. However, it has not strictly been distinguished whether the effect is direct or indirect through alteration of contour segmentation or parsing. Here, I report that stereoscopic depth does not influence completion of partially occluded figures when parsing is unambiguous from motion cues. This is consistent with the present proposal that stereoscopic depth does not have a unique role in completion and that it is one of the cues to contour segmentation or parsing, which in turn influences completion and surface representation, like motion, shape, or transparency.

  14. POLES OF ZETA FUNCTIONS OF COMPLETE INTERSECTIONS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A vanishing theorem is proved for -adic cohomology with compact support on an affine (singular) complete intersection. As an application, it is shown that for an affine complete intersection defined over a finite field of q elements, the reciprocal "poles" of the zeta function are always divisible by q as algebraic integers. A p-adic proof is also given, which leads to further q-divisibility of the poles or equivalently an improvement of the polar part of the AxKatz theorem for an affine complete intersection. Similar results hold for a projective complete intersection.

  15. Well Integrity and Sealing in CO2 Sequestration Wells

    Science.gov (United States)

    Sweatman, R.; Santra, A.; Kulakofsky, D.

    2009-12-01

    CO2 sequestration is a cost-effective and safe way to help mitigate climate change. Sustained well integrity and zonal isolation of CO2 by cement for the required 1000 year trapping period may be challenging. Some researchers report that cement fails when exposed to CO2 leading to potential leakage into the atmosphere or other underground zones. Others show cement samples from 30-50 year old CO2 wells that maintain the well’s sealing integrity, even though carbonization was found. This presentation provides reasons likely for this disparity between research lab test results and actual well performance data along with best practices to provide efficient cement-based systems for maintaining CO2 containment in storage and EOR (enhanced oil recovery) reservoirs. This discussion includes the geochemical conditions surrounding wells and the positive, long-term effects on cement durability, sealing integrity, and the protection of well casing from CO2 induced corrosion. Also discussed are recent laboratory results testing cement samples surrounded by formation material treated at two different downhole conditions. In one case the cement specimens were treated with a 40% humid CO2 at 140°F and 2000 psi whereas in the second case they were treated with saturated CO2 in water at 200°F and 2000 psi for various time intervals. Results show that samples of carefully designed cement systems had carbonization without any sign of loss of mechanical or sealing integrity which could lead to zonal isolation and well integrity failures. We also will report on a new lab method proposed to determine CO2 sealing performance by cement in a relatively short time period compared to previous methods. In summary, we will discuss a comprehensive approach that may be taken to help ensure longer term effective well integrity and CO2 containment in new CO2 wells and remedial solutions for old wells and for plugging and abandoning wells.

  16. Wellness as a worldwide phenomenon?

    Science.gov (United States)

    Elliott, Heather; Bernstein, Jennifer; Bowman, Diana M

    2014-10-01

    This article examines the concept of wellness through a comparative political economy and legal framework. It asks whether wellness, an increasingly defined term within US federal and state legislative instruments including, for example, the Patient Protection and Affordable Care Act, is primarily a US-centric phenomenon. Or is wellness, in its various different guises, a worldwide phenomenon? By focusing on three distinctly different jurisdictions - the United States, Germany, and Australia - this article examines wellness through the lens of employers, the health care system, employment and tort law, and the greater political economy. It notes that while improving employee health, well-being, and productivity is common across the three countries and their respective cultures, the focus on wellness as a distinct legal concept is unique to the United States. Copyright © 2014 by Duke University Press.

  17. WES: A well test analysis expert system

    Energy Technology Data Exchange (ETDEWEB)

    Mensch, A.

    1988-06-01

    This report describes part of the development of an expert system in the domain of well-test analysis. This work has been done during my final internship, completed at the Lawrence Berkeley Laboratory. The report is divided in three parts: the first one gives a description of the state of the project at the time I first began to work on it, and raises some problems that have to be solved. The second section shows the results that have been reached, and the last one draws conclusions from these results and proposes extensions that would be useful in the future.

  18. The Magnets Puzzle is NP-Complete

    DEFF Research Database (Denmark)

    Kölker, Jonas

    2012-01-01

    In a Magnets puzzle, one must pack magnets in a box subjet to polarity and numeric constraints. We show that solvability of Magnets instances is NP-complete.......In a Magnets puzzle, one must pack magnets in a box subjet to polarity and numeric constraints. We show that solvability of Magnets instances is NP-complete....

  19. 78 FR 76218 - Rural Call Completion

    Science.gov (United States)

    2013-12-17

    ... providers of VoIP service, other providers could circumvent the rules by working with a VoIP service... expect the Commission will obtain the data we need to identify and analyze patterns of call completion... below will allow the Commission to better identify patterns of rural call completion problems and...

  20. Query auto completion in information retrieval

    NARCIS (Netherlands)

    Cai, Fei

    2016-01-01

    Query auto completion is an important feature embedded into today's search engines. It can help users formulate queries which other people have searched for when he/she finishes typing the query prefix. Today's most sophisticated query auto completion approaches are based on the collected query logs

  1. Strictly convex functions on complete Finsler manifolds

    Indian Academy of Sciences (India)

    YOE ITOKAWA; KATSUHIRO SHIOHAMA; BANKTESHWAR TIWARI

    2016-10-01

    The purpose of the present paper is to investigate the influence of strictly convex functions on the metric structures of complete Finsler manifolds. More precisely we discuss the properties of the group of isometries and the exponential maps on a complete Finsler manifold admitting strictly convex functions.

  2. Leak Path Development in CO2 Wells

    Science.gov (United States)

    Torsater, M.; Todorovic, J.; Opedal, N.; Lavrov, A.

    2014-12-01

    Wells have in numerous scientific works been denoted the "weak link" of safe and cost-efficient CO2 Capture and Storage (CCS). Whether they are active or abandoned, all wells are man-made intrusions into the storage reservoir with sealing abilities depending on degradable materials like steel and cement. If dense CO2 is allowed to expand (e.g. due to leakage) it will cool down its surroundings and cause strong thermal and mechanical loading on the wellbore. In addition, CO2 reacts chemically with rock, cement and steel. To ensure long-term underground containment, it is therefore necessary to study how, why, where and when leakage occurs along CO2wells. If cement bonding to rock or casing is poor, leak paths can form already during drilling and completion of the well. In the present work, we have mapped the bonding quality of cement-rock and cement-steel interfaces - and measured their resistance towards CO2 flow. This involved a large experimental matrix including different rocks, steels, cement types and well fluids. The bonding qualities were measured on composite cores using micro computed tomography (µ-CT), and CO2 was flooded through the samples to determine leakage rates. These were further compared to numerical simulations of leakage through the digitalized µ-CT core data, and CO2chemical interactions with the materials were mapped using electron microscopy. We also present a new laboratory set-up for measuring how well integrity is affected by downhole temperature variations - and we showcase some initial results. Our work concludes that leak path development in CO2 wells depends critically on the drilling fluids and presflushes/spacers chosen already during drilling and completion of a well. Fluid films residing on rock and casing surfaces strongly degrade the quality of cement bonding. The operation of the well is also important, as even slight thermal cycling (between 10°C and 95°C on casing) leads to significant de-bonding of the annular cement.

  3. Well sealing via thermite reactions

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, William Edward; Dunn, Sandra Dalvit

    2016-11-15

    A platform is formed in a well below a target plug zone by lowering a thermite reaction charge into the well and igniting it, whereby the products of the reaction are allowed to cool and expand to form a platform or support in the well. A main thermite reaction charge is placed above the platform and ignited to form a main sealing plug for the well. In some embodiments an upper plug is formed by igniting an upper thermite reaction charge above the main thermite reaction charge. The upper plug confines the products of ignition of the main thermite reaction charge.

  4. The new frontier of wellness.

    Science.gov (United States)

    Clark, Ann D

    2008-01-01

    Businesses should focus on a proactive solution to rising health care costs, using integrated wellness programs that emphasize condition management and total health and well-being. If corporations wish to remain competitive, profitable and successful in attracting and retaining topnotch talent from all generations, they are going to have to start investing in and thinking creatively about wellness offerings. Not only do wellness programs have a proven track record of success in reducing health care costs, they also resonate loud and clear with modern-day employees who are determined to work for a company that understands their needs and is willing to make progress with the employee's best interests in mind.

  5. Calabi-Yau completions and orbifold equivalences

    CERN Document Server

    Carqueville, Nils

    2015-01-01

    Calabi-Yau algebras are particularly symmetric differential graded algebras. There is a construction due to Keller called `Calabi-Yau completion' which produces a canonical Calabi-Yau algebra from any homologically smooth dg algebra. Homologically smooth dg algebras also form a 2-category to which the construction of `equivariant completion' can be applied. In this theory two objects are called `orbifold equivalent' if there is a 1-morphism with invertible quantum dimensions between them. Any such relation entails a whole family of equivalences between categories. We show that Calabi-Yau completion and equivariant completion are compatible. More precisely, we prove that any orbifold equivalence between two homologically smooth and proper dg algebras lifts to an orbifold equivalence between their Calabi-Yau completions. As a corollary we obtain orbifold equivalences between Ginzburg algebras of Dynkin quivers.

  6. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A.; Kumar, Sameer; Parker, Jeffrey J.

    2014-07-01

    Completion processing of data communications instructions in a distributed computing environment with computers coupled for data communications through communications adapters and an active messaging interface (`AMI`), injecting for data communications instructions into slots in an injection FIFO buffer a transfer descriptor, at least some of the instructions specifying callback functions; injecting a completion descriptor for each instruction that specifies a callback function into an injection FIFO buffer slot having a corresponding slot in a pending callback list; listing in the pending callback list callback functions specified by data communications instructions; processing each descriptor in the injection FIFO buffer, setting a bit in a completion bit mask corresponding to the slot in the FIFO where the completion descriptor was injected; and calling by the AMI any callback functions in the pending callback list as indicated by set bits in the completion bit mask.

  7. Completion processing for data communications instructions

    Science.gov (United States)

    Blocksome, Michael A.; Kumar, Sameer; Jeffrey, Parker J.

    2014-06-10

    Completion processing of data communications instructions in a distributed computing environment with computers coupled for data communications through communications adapters and an active messaging interface (`AMI`), injecting for data communications instructions into slots in an injection FIFO buffer a transfer descriptor, at least some of the instructions specifying callback functions; injecting a completion descriptor for each instruction that specifies a callback function into an injection FIFO buffer slot having a corresponding slot in a pending callback list; listing in the pending callback list callback functions specified by data communications instructions; processing each descriptor in the injection FIFO buffer, setting a bit in a completion bit mask corresponding to the slot in the FIFO where the completion descriptor was injected; and calling by the AMI any callback functions in the pending callback list as indicated by set bits in the completion bit mask.

  8. Determinants of successful completion of pulmonary rehabilitation in COPD

    Directory of Open Access Journals (Sweden)

    Brown AT

    2016-02-01

    Full Text Available Angel T Brown,1 Jason Hitchcock,2 Christopher Schumann,2 J Michael Wells,1,3,4 Mark T Dransfield,1,3,4 Surya P Bhatt1,3 1Division of Pulmonary, Allergy, and Critical Care Medicine, 2Department of Cardiopulmonary Rehabilitation, 3UAB Lung Health Center, University of Alabama at Birmingham, 4Veterans Affairs Medical Center, Birmingham, AL, USA Background: Despite known benefits, a significant proportion of patients with COPD do not complete pulmonary rehabilitation (PR. Little is known regarding which factors promote successful completion of PR. Methods: We analyzed data from a prospectively maintained database of subjects with COPD who attended a PR program at the University of Alabama at Birmingham, from 1996 to 2013. Subjects were categorized as either completers or non-completers, based on successful completion of at least 8 weeks of PR. Demographics and comorbidities were recorded. Short Form 36 Health Survey, Beck Depression Inventory-II, and San Diego Shortness of Breath Questionnaire were administered to all participants at baseline and on completion of PR to assess participants’ perception of their health status, severity of depression, and dyspnea with performance of activities of daily living. Univariate and multivariable analyses were performed to identify predictors of successful completion of PR. Results: Four hundred and forty subjects were included, of whom 229 completed PR. Forty-one percent were female, and 17% were African American. Compared with non-completers, completers had greater Short Form 36 Health Survey pain score, lower forced expiratory volume in the first second, and lower Beck Depression Inventory score, and included a lower percentage of current smokers. On multivariate analysis, cigarette smoking at enrollment was associated with lower likelihood of completion of PR (adjusted odds ratio 0.38, 95% confidence interval 0.16–0.90; P=0.02.Conclusion: Cigarette smoking was the sole independent predictor of PR

  9. Catalysts for complete oxidation of gaseous fuels

    Energy Technology Data Exchange (ETDEWEB)

    Neyestanaki, A.K.

    1995-12-31

    This thesis presents a study on the complete oxidation of propane, natural gas and the conversion of car exhaust gases over two types of catalysts: (a) knitted silica-fibre supported catalysts and (b) metal-modified ZSM zeolite catalysts. A hybrid textile made up of an organic-inorganic hybrid fibre containing 70 % cellulose and 30 % silicic acid was used as the raw material for preparation of the fibre support for combustion catalysts. The hybrid textile was burnt to obtain a knitted silica-fibre. The changes in the surface area, pore volume and the crystallinity of the obtained support were studied as a function of burning temperature. The stability of the support in steam-rich atmospheres was tested. The knitted silica-fibre obtained by burning the hybrid textile at 1223 K was found to have sufficient strength and high BET specific surface area (140 m{sub 2}/g) to be used as a catalyst support. A series of knitted silica-fibre supported metal oxides (oxides of Co, Ni, Mn, Cr and Cu) and combinations of them, platinum-activated metal oxides (Pt-Co{sub 3}O{sub 4}, Pt-NiO, Pt-MnO{sub 2} and Pt-Cr{sub 2}O{sub 3}) as well as noble metal (Pt, Pd) catalysts were prepared. The location of the metal oxides on the catalyst was studied by SEM equipped with EDXA. The metal oxide was found to be located mostly inside the pores rather than on the exterior surface of the silica-fibre. The catalysts were characterized by XRD, N{sub 2}-physisorption, O{sub 2}-TPD and the chemisorption of propane, carbon monoxide and hydrogen. The activity of the catalysts was tested in the combustion of propane, natural gas and in the conversion of automobile exhaust gases. The effect of residence time and stoichiometry on the conversion behaviour of the catalysts was studied

  10. Review - The Complete Works of Zhuang Xueben

    Directory of Open Access Journals (Sweden)

    Amy Holmes-Tagchungdarpa

    2012-12-01

    Full Text Available Review of: Zhuang Xueben, Li Mei, Wang Huangsheng, and Zhuang Wenjun (eds. 2009. Zhuang xueben quan ji [The Complete Works of Zhuang Xueben], Volumes I and II. Beijing : Zhonghua Shuju [Zhonghua Book Company]. 767. Zhuang Xueben's Authored Works, Borderland Photographs List, Timeline, Epilogue. Soft cover. ISBN: 978-7-101-06859-7 (paperback, 688RMB. Deeply patriotic, dedicated, and self-educated, Zhuang Xueben (1909-1984 typified his generation in many respects. He set out on a self-imposed mission to investigate the underexplored territory between Republican China and Central Tibet in 1934. His writings about his adventures and observations became popular in his native Shanghai and in other urban areas of China, where investigating and categorizing the borderlands were part of broader, nation-building methods during the Republican period. However, what set Zhuang apart from his contemporaries were the extraordinary photographs he took of his journey throughout Mgo log and surrounding areas in 1934. Images of vast landscapes featuring craggy gorges and bucolic villages inhabited by various ethnicities including the Qiang and the Rong were published in the major photographic periodicals of the day, and led to an increased interest in his work and new patronage opportunities from the Republican government that allowed Zhuang to continue his journeys. These extended into Gansu, Qinghai, Sichuan, Yunnan, and the short-lived experimental province of Xikang, as well as briefly into India. Between 1934 and the end of the 1950s, Zhuang took over 3,000 photographs of the people he met during his travels, and took thousands of pages of notes. He was an excellent example of the young, adventurous Chinese intellectuals of ...

  11. Attenuation of water coning using dual completion technology

    Energy Technology Data Exchange (ETDEWEB)

    Ould-amer, Y.; Chikh, S. [Departement de Genie Mecanique, USTHB, B.P. 32 El Alia, Bab-Ezzouar, 16111 Algiers (Algeria); Naji, H. [Laboratoire de Mecanique de Lille, UMR 8107, Polytech' Lille, USTL (France)

    2004-11-30

    Water coning causes a reduction of oil production and an increase of production costs. Dual completion (downhole water sink) is one of the methods adopted to attenuate water coning. This work describes numerical results associated with this completion technique. The water cone shape and water breakthrough time are investigated to define the mechanism and performance of this technical procedure. The numerical results show that dual completion deforms the shape of the cone. For instance, the top of the water-oil interface is shifted away from the well yielding (under high water production rates) oil breakthrough into water perforations. The water breakthrough is proportional to dimensionless density difference and horizontal permeability and inversely proportional to oil production rate, mobility, and anisotropy ratios. High oil production rates yield elevation of water coning height that intercepts oil flow. Paradoxically, high production rate at water sink is not recommended, the improvement of water breakthrough begins when dimensionless density difference is greater than 0.05. The dual completion technique delays water breakthrough time (BT). In general, the BT is delayed by two times that of single completion and critical oil rate is augmented compared to single completion.

  12. Water Well Locations - MO 2012 Certified Wells (SHP)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This data set provides information about wells that are certified by the State of Missouri. The parent data set is the Wellhead Information Management System (WIMS)...

  13. Community College Employee Wellness Programs

    Science.gov (United States)

    Thornton, L. Jay; Johnson, Sharon

    2010-01-01

    This paper describes the prevalence and characteristics of employee wellness programs in public community colleges accredited by the Southern Association of Colleges and Schools (SACS). A random sample of 250 public community colleges accredited by SACS was mailed a 46-item employee-wellness program survey. The survey solicited program information…

  14. Well test analysis for wells producing layered reservoirs with crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Raghavan, R.; Prijambodo, R.; Reynolds, A.C.

    1985-06-01

    The pressure response of a well producing a two-layer reservoir with crossflow is examined. Virtually all studies on the response of a well in multilayered systems with crossflow claim that after a few hours of production these systems behave as if they are single-layer systems. In this study, the authors show that the flowing pressure response of a well at early times can be divided into three flow periods. The first period is one in which the reservoir behaves as if it were a stratified (no-crossflow) system. This period is followed by a transitional period. The response of the well during this period depends on the contrast in horizontal permeabilities and on the degree of communication between the layers. During the third period, the reservoir can be described by an equivalent single-layer system. An examination of the time ranges of the various flow periods indicates that, unless tests are designed properly, most of the interpretable pressure buildup data would be measured during the time the well response is influenced by the transitional period. The influence of the skin regions on the well response is examined. The significance of the estimate of the skin factor obtained from a pressure test is discussed. The authors show that the nature and the magnitude of the skin regions and the size of the reservoir determine the applicability of conventional semilog procedures to systems with interlayer communication.

  15. Modeling the complete Otto cycle: Preliminary version. [computer programming

    Science.gov (United States)

    Zeleznik, F. J.; Mcbride, B. J.

    1977-01-01

    A description is given of the equations and the computer program being developed to model the complete Otto cycle. The program incorporates such important features as: (1) heat transfer, (2) finite combustion rates, (3) complete chemical kinetics in the burned gas, (4) exhaust gas recirculation, and (5) manifold vacuum or supercharging. Changes in thermodynamic, kinetic and transport data as well as model parameters can be made without reprogramming. Preliminary calculations indicate that: (1) chemistry and heat transfer significantly affect composition and performance, (2) there seems to be a strong interaction among model parameters, and (3) a number of cycles must be calculated in order to obtain steady-state conditions.

  16. On the complete perturbative solution of one-matrix models

    Directory of Open Access Journals (Sweden)

    A. Mironov

    2017-08-01

    Full Text Available We summarize the recent results about complete solvability of Hermitian and rectangular complex matrix models. Partition functions have very simple character expansions with coefficients made from dimensions of representation of the linear group GL(N, and arbitrary correlators in the Gaussian phase are given by finite sums over Young diagrams of a given size, which involve also the well known characters of symmetric group. The previously known integrability and Virasoro constraints are simple corollaries, but no vice versa: complete solvability is a peculiar property of the matrix model (hypergeometric τ-functions, which is actually a combination of these two complementary requirements.

  17. Roberto Del Favero completes the description of Italian forests

    Directory of Open Access Journals (Sweden)

    Paci M

    2010-12-01

    Full Text Available The description of Italian woods by Roberto Del Favero is now completed: after the book dedicated to the “woods of the Alpine regions” and the one concerning the “woods of the southern Italy and Italian islands”, a third book completes the arrangement, aimed to the forest management, of the Italian woods. In the treatise, the strict connection between ecology and silviculture must be underlined: the silvicultural choices are proposed in accordance with ecological requirements of the tree species, as well as to the natural dynamic of stands.

  18. Characterization Well R-7 Geochemistry Report

    Energy Technology Data Exchange (ETDEWEB)

    P.Longmire; F.Goff

    2002-12-01

    This report provides analytical results for four groundwater-sampling rounds conducted at characterization well R-7. The goal of the characterization efforts was to assess the hydrochemistry and to determine if contaminants from Technical Area (TA)-2 and TA-21 of the Los Alamos National Laboratory (LANL or the Laboratory) are present in the regional aquifer in the vicinity of the well. Figure 1.0-1 shows the well's location in the narrow upper part of Los Alamos Canyon, between the inactive Omega West reactor and the mouth of DP Canyon. Well R-7 is in an excellent location to characterize the hydrology and groundwater chemistry in both perched groundwater and the regional aquifer near sites of known Laboratory effluent release, including radionuclides and inorganic chemicals (Stone et al. 2002, 72717). The Risk Reduction and Environmental Stewardship-Remediation (RRES-R) Program (formerly the Environmental Restoration [ER] Project) installed well R-7 as part of groundwater investigations to satisfy requirements of the ''Hydrogeologic Workplan'' (LANL 1998, 59599) and to support the Laboratory's ''Groundwater Protection Management Program Plan'' (LANL 1996, 70215). Well R-7 was designed primarily to provide geochemical or water quality and hydrogeologic data for the regional aquifer within the Puye Formation. This report also presents a geochemical evaluation of the analytical results for well R-7 and provides hydrogeochemical interpretations using analytical results for groundwater samples collected at the well. Discussion of other hydrogeochemical data collected within the east-central portion of the Laboratory, however, is deferred until they can be evaluated in the context of sitewide information collected from other RRES and Hydrogeologic Workplan characterization wells (R-8A, R-9, and R-9i). Once all deep groundwater investigations in the east-central portion of the Laboratory are completed, geochemical and

  19. Completion Design Considerations for a Horizontal Enhanced Geothermal System

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Jeffrey; Eustes, Alfred; Fleckenstein, William; Eker, Erdinc; Baker, Reed; Augustine, Chad

    2015-09-02

    The petroleum industry has had considerable success in recent decades in developing unconventional shale plays using horizontal drilling and multi-zonal isolation and stimulation techniques to fracture tight formations to enable the commercial production of oil and gas. Similar well completions could be used in Enhanced Geothermal Systems (EGS) to create multiple fractures from horizontal wells. This study assesses whether well completion techniques used in the unconventional shale industry to create multi-stage fractures can be applied to an enhanced geothermal system, with a focus on the completion of the EGS injection well. This study assumes an Enhanced Geothermal System (EGS) consisting of a central horizontal injection well flanked on each side by horizontal production wells, connected to the injection well by multiple fractures. The focus is on the design and completion of the horizontal well. For the purpose of developing design criteria, a reservoir temperature of 200 degrees C (392 degrees F) and an injection well flow rate of 87,000 barrels per day (160 kg/s), corresponding to production well flow rates of 43,500 barrels per day (80 kg/s) is assumed. The analysis found that 9-5/8 inches 53.5 pounds per foot (ppf) P110 casing string with premium connections meets all design criteria for the horizontal section of injection well. A P110 grade is fairly common and is often used in horizontal sections of shale development wells in petroleum operations. Next, several zonal isolation systems commonly used in the shale gas industry were evaluated. Three techniques were evaluated -- a 'plug and perf' design, a 'sand and perf' design, and a 'packer and port' design. A plug and perf system utilizes a cemented casing throughout the length of the injector wellbore. The sand and perf system is identical to the plug and perf system, but replaces packers with sand placed in the casing after stimulation to screen out the stimulated

  20. as well as, as well, might as well 之用法

    Institute of Scientific and Technical Information of China (English)

    盛艳明

    2009-01-01

    1. as well as =not only/just … but(also),但两者在意义上有不同之处:as well as 侧重前者,而not only /just…but (also)侧重后者,通常要理解为A as well as B=not only/just B but(also) A。如:

  1. Modeling multiaquifer wells with MODFLOW.

    Science.gov (United States)

    Neville, Christopher J; Tonkin, Matthew J

    2004-01-01

    Multiaquifer wells, i.e., wells that are open across more than one aquifer, can have a profound effect on the hydraulics of a ground water system. These wells change the physical system by establishing direct hydraulic links between otherwise isolated strata. Several methods are available to simulate multiaquifer wells in the context of comprehensive ground water flow simulators. In this paper, we review four methods to represent multiaquifer wells with the widely used code MODFLOW. These methods include a specialized code developed, but never formally released, by the U.S. Geological Survey (USGS), the Multi-Aquifer Well (MAW1) Package. An expanded implementation of the techniques in the MAW1 Package has been incorporated in the Multi-Node Well Package released recently by the USGS (Halford and Hanson 2002). We examine the performance of the methods in the context of a benchmarking study against the analytical solutions of Papadopulos (1966) and Sokol (1963). Our results demonstrate that results obtained with the MAW1 Package closely match exact solutions for pumping and nonpumping conditions, using both coarse and refined grids.

  2. Oracle Goldengate 11g complete cookbook

    CERN Document Server

    Gupta, Ankur

    2013-01-01

    Oracle Goldengate 11g Complete Cookbook follows the Cookbook style. Each recipe provides step by step instructions with various examples and scripts. This book provides the necessary information to successfully complete most of the possible administration tasks.Oracle Goldengate 11g Complete Cookbook is aimed at Database Administrators, Architects, and Middleware Administrators who are keen to know more about Oracle Goldengate. Whether you are handling Goldengate environments on a day-to-day basis, or using it just for migration, this book provides the necessary information required to success

  3. THE PRODUCTIVITY OF WELL PATTERN WITH HORIZONTAL WELLS AND VERTICAL WELLS

    Institute of Scientific and Technical Information of China (English)

    Zhao Chun-sen; Cui Hai-qing; Song Wen-ling; Zhang Zhen

    2003-01-01

    The calculation of productivity and the choice of well pattern of mixed horizontal and vertical wells were discussed in this paper. Because the naturall drainage areas of horizontal wells are oval rather than circular, rectangular drainage well patterns should be adopted. Using pseudo 3-dimensional method and conformal transformation, the potential function of a row of horizontal wells was deduced. Using this function and the superposition principle, an analytical solution of the productivity for the rectangular mixed well pattern was given. Quantitative means for defining the shapes of the optimum pattern were developed in this paper by introducing two dimensionless parameters, the shape factor and dimensionless length of horizontal well. The formula for productvity was used to optimize the mixed well patterns. The curves of the optimized shape factor against dimensionless length of horizontal well were drawn. The results show that the pattern area and formation thickness have no effect on the optimal shape factors and can be applied to the design of development for oil fields.

  4. Well test analysis for Devonian-shale wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Serra, K.; Chen, C.C.; Yeh, N.S.; Ohaeri, C.; Reynolds, A.C.; Raghavan, R.

    1981-09-30

    This work presents broad interpretive rules for analyzing Devonian Shale Wells based on simulated drawdown and buildup tests. The report consists of four parts: (1) New Pressure Transient Analysis Methods for Naturally Fractured Reservoirs, (2) Pressure Transient Analysis Methods for Bounded Naturally Fractured Reservoirs, (3) Pressure Response at Observation Wells in Fractured Reservoirs, and (4) Unsteady Flow to a Well Produced at a Constant Pressure in a Fractured Reservoir. Each of these sections is an independent unit; that is, knowledge of the other sections, even though desirable, is not necessary to understand the material in a given section. The principal contribution of this work is the identification of a new flow regime during the early transient period. The discovery of this flow regime represents a major advance in our ability to analyze pressure transient tests. The identification of the new flow regime also explains the response of wells in fractured reservoirs that until now have been considered anomalous. Systematic procedures to analyze single well (drawdown and buildup) tests and multiwell (interference) tests are discussed.

  5. Session: Long Valley Exploratory Well

    Energy Technology Data Exchange (ETDEWEB)

    Tennyson, George P. Jr.; Finger, John T.; Eichelberger, John C.; Hickox, Charles E.

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of four presentations: ''Long Valley Exploratory Well - Summary'' by George P. Tennyson, Jr.; ''The Long Valley Well - Phase II Operations'' by John T. Finger; ''Geologic results from the Long Valley Exploratory Well'' by John C. Eichelberger; and ''A Model for Large-Scale Thermal Convection in the Long Valley Geothermal Region'' by Charles E. Hickox.

  6. 7 Steps to Aging Well

    Science.gov (United States)

    ... Issue Past Issues Special Section 7 Steps to Aging Well Past Issues / Winter 2007 Table of Contents ... Exercise: A Guide from the National Institute on Aging is a publication from NIA that has strength, ...

  7. The well-being questionnaire

    DEFF Research Database (Denmark)

    Pouwer, F; Snoek, Frank J; Van Der Ploeg, Henk M

    2000-01-01

    analyses were conducted. Group B (N = 736) was split up into four subgroups of male or female patients with type 1 or type 2 diabetes. In these subgroups, confirmatory factor analyses were employed to test the model(s) developed in group A and the two models described in the literature (four-factor model......BACKGROUND: The Well-being Questionnaire (W-BQ) has been designed to measure psychological well-being in people with a chronic somatic illness and is recommended by the World Health Organization for widespread use. However, studies into the factor structure of this instrument are still limited....... This factor solution was stable across gender, type of diabetes and level of education. CONCLUSIONS: The best description of the factor structure of the Dutch translation of the W-BQ was given by a three-factor solution with 12 items (W-BQ12), measuring positive well-being (four items), negative well...

  8. Monitoring Animal Well-being

    DEFF Research Database (Denmark)

    Gronskyte, Ruta

    In recent years, animal well-being in industrial slaughterhouses has become a significant concern for consumers, farmers, and meat producers. Different groups have different interpretations of animal well-being. For the majority of consumers, animal well-being is highly influenced by their values......, it is common to mix pigs from different farmers in one area. Such mixing can cause fights between pigs, which can lead to additional stress or the animals being harmed. The unfamiliar environment also increases the animals’ stress levels. In some industrial slaughterhouses, up to 62,000 pigs per week...... are handled. Ensuring the well-being of such large numbers of pigs using only personnel is a complicated task. Video surveillance of humans has been widely used to ensure safety and order in multiple situations. Methods have been developed to detect individual actions or abnormal behavior in small groups...

  9. Wellness strategies for smaller businesses.

    Science.gov (United States)

    Neely, Marc

    2012-01-01

    While innovative smaller companies are implementing employee wellness programs, many smaller firms may point to a lack of resources, such as staffing and financial resources, to establish and sustain a wellness program. The uncertain economy and rising health care costs have caused many smaller businesses to focus on core business strategies to keep the doors open and the business going. However, innovative companies realize that building a culture of health is a long-term business strategy directly related to improving the bottom line. This article highlights one company's approach to wellness and the results of the company's programs. It also outlines the components of a successful wellness program and suggests practical implementation steps for smaller businesses.

  10. Complete Denture in a Microstomia Patient

    National Research Council Canada - National Science Library

    Satpathy, Ashish; Gujjari, Anil K

    2015-01-01

    .... It's the duty of a dentist to provide every possible care to the patient with microstomia. This paper describes the treatment of a microstomia patient requiring complete dentures using sectional dentures...

  11. Network Completion for Static Gene Expression Data

    Directory of Open Access Journals (Sweden)

    Natsu Nakajima

    2014-01-01

    Full Text Available We tackle the problem of completing and inferring genetic networks under stationary conditions from static data, where network completion is to make the minimum amount of modifications to an initial network so that the completed network is most consistent with the expression data in which addition of edges and deletion of edges are basic modification operations. For this problem, we present a new method for network completion using dynamic programming and least-squares fitting. This method can find an optimal solution in polynomial time if the maximum indegree of the network is bounded by a constant. We evaluate the effectiveness of our method through computational experiments using synthetic data. Furthermore, we demonstrate that our proposed method can distinguish the differences between two types of genetic networks under stationary conditions from lung cancer and normal gene expression data.

  12. Structural Completeness in The War is Over

    DEFF Research Database (Denmark)

    Nielsen, Jakob Isak

    2010-01-01

    This article argues that Nina Mimica's The War is Over achieves structural completeness on the basis of a number of choices regarding its visual style: shot scale, shot length, editing style and camera movement.  ar Udgivelsesdato: Autumn...

  13. Logistics Hub Near Lhasa Almost Complete

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Seventy percent of the construction of the Naqu logistics center, 300 km north of the Tibetan capital Lhasa, was completed on October 1.With a total investment of 1.5 billion yuan (about $200 million), the Naqu

  14. Construction of complete generalized algebraic groups

    Institute of Scientific and Technical Information of China (English)

    WANG; Dengyin

    2005-01-01

    With one exception, the holomorph of a finite dimensional abelian connectedalgebraic group is shown to be a complete generalized algebraic group. This result on algebraic group is an analogy to that on Lie algebra.

  15. Quantization of noncommutative completely integrable Hamiltonian systems

    Energy Technology Data Exchange (ETDEWEB)

    Giachetta, G. [Department of Mathematics and Informatics, University of Camerino, 62032 Camerino (Italy); Mangiarotti, L. [Department of Mathematics and Informatics, University of Camerino, 62032 Camerino (Italy); Sardanashvily, G. [Department of Theoretical Physics, Moscow State University, 117234 Moscow (Russian Federation)]. E-mail: gennadi.sardanashvily@unicam.it

    2007-02-26

    Integrals of motion of a Hamiltonian system need not commute. The classical Mishchenko-Fomenko theorem enables one to quantize a noncommutative completely integrable Hamiltonian system around its invariant submanifold as the Abelian one.

  16. Well safety in Brazil; Seguranca de poco no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Otto L.A.; Sotomayor, Gabriel P.G.; Lage, Antonio C.M.; Scaringi Filho, Orlando; Martins, Francisco S.B. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    This article presents and discusses the actions taken in Brazil, in order to make drilling, completion and intervention operations safer. The implementation of these actions resulted in a reduction of the number of blowouts in the Country. They can be grouped into four categories: training and certification in well control of all personnel directly involved in drilling, completion and intervention operations (so far, more than 3800 well control certificates have been issued since the beginning of the certification program in 1993); rig inspections of the well control equipment and procedures and follow-up of the well control drills and rig crew certification; development of a program for writing regulations for several well control aspects such as design and operational procedures, equipment requirements, and practical recommendations for well control operations; and well control research projects specially those focused on deep waters. (author)

  17. ORAL INJURIES ASSOCIATED WITH THE USE OF COMPLETE ENTURE

    Directory of Open Access Journals (Sweden)

    Thanny de Paula Mascarenhas Barbosa

    2011-05-01

    Full Text Available Nowadays the complete denture still is a very used method of treatment in the rehabilitation of persons who lost their teeth. Oral lesions may occur due to the use of denture with deficiency in confection, or even an inadequate orientation of the patient by the dental surgeon about the use of the dentures and its cleaning. Among the oral lesions caused by the use of complete denture most frequent were the chronic atrophic candidiasis, chronic hyperplastic candidiasis, inflammatory fibrous hyperplasia, angular cheilitis, and traumatic ulceration. A neoplasic lesion wasn’t found associated with the use of dentures. This study aims to identify through a literature review of the prevalence of major diseases due to the use of complete dentures as well as their treatments.

  18. Pointwise approximation by elementary complete contractions

    CERN Document Server

    Magajna, Bojan

    2009-01-01

    A complete contraction on a C*-algebra A, which preserves all closed two sided ideals J, can be approximated pointwise by elementary complete contractions if and only if the induced map on the tensor product of B with A/J is contractive for every C*-algebra B, ideal J in A and C*-tensor norm on the tensor product. A lifting obstruction for such an approximation is also obtained.

  19. Generalized Inflations of Completely Simple Semigroups

    Institute of Scientific and Technical Information of China (English)

    Qiang Wang; Shelly L. Wismath

    2007-01-01

    Clarke and Monzo defined a construction called a generalized inflation of a semigroup, and proved that for unions of groups, all null extensions are generalized inflations. We characterize when a groupoid containing a completely simple semigroup B is an as\tsociative generalized inflation of B, and thus provide a way to construct all associative generalized inflations (null extensions) of a given completely simple semigroup.This answers a question posed by Clarke and Monzo.

  20. Completions of pre–uniform spaces

    OpenAIRE

    Adalberto García-Máynez; Rubén Mancio-Toledo

    2007-01-01

    [EN] In this paper we prove the existence of a completion of a T0–pre-uniform space (X,U), with the property that each Cauchy filter in (X,U) contains a weakly round filter. García-Máynez, A.; Mancio-Toledo, R. (2007). Completions of pre–uniform spaces. Applied General Topology. 8(2):213-221. doi:10.4995/agt.2007.1882. 213 221 8 2

  1. Complete interruption of the aortic arch

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sung Hak; Park, In Kyu; Lee, Won Hwa; Kim, Yong Joo; Kang, Duk Sik; Lee, Jong Tae [Kyungpook National University College of Medicine, Taegu (Korea, Republic of)

    1984-09-15

    Complete interrupture of the aortic arch is one of the least common cardiac malformation. In this condition, continuity between the ascending and descending protions of the aorta is not present, and the descending aorta is supplied through a reversing patent ductus arteriosus. In the majority of the patients a ventricular septal defect is present. Authors have experienced a case of the complete interruption of aortic arch, interruption between the left carotid and the left subclavian artery.

  2. DECOMPOSITIONS OF COMPLETE GRAPHS INTO KAYAK PADDLES

    Directory of Open Access Journals (Sweden)

    Dalibor Froncek

    2012-03-01

    Full Text Available A canoe paddle is a cycle attached to an end-vertex of a path. It was shown by Truszczynski that all canoe paddles are graceful and therefore decompose complete graphs. A kayak paddle is a pair of cycles joined by a path. We prove that the complete graph K2n+1 is decomposable into kayak paddles with n edges whenever at least one of its cycles is eve

  3. Hirzebruch-Milnor classes of complete intersections

    CERN Document Server

    Maxim, Laurentiu; Schuermann, Joerg

    2012-01-01

    We prove a new formula for the Hirzebruch-Milnor classes of global complete intersections with arbitrary singularities describing the difference between the Hirzebruch classes and the virtual ones. This generalizes a formula for the Chern-Milnor classes in the hypersurface case that was conjectured by S. Yokura and was proved by A. Parusinski and P. Pragacz. It also generalizes a formula of T. Suwa for the Chern-Milnor classes of complete intersections with isolated singularities.

  4. Completion of DNA replication in Escherichia coli.

    Science.gov (United States)

    Wendel, Brian M; Courcelle, Charmain T; Courcelle, Justin

    2014-11-18

    The mechanism by which cells recognize and complete replicated regions at their precise doubling point must be remarkably efficient, occurring thousands of times per cell division along the chromosomes of humans. However, this process remains poorly understood. Here we show that, in Escherichia coli, the completion of replication involves an enzymatic system that effectively counts pairs and limits cellular replication to its doubling point by allowing converging replication forks to transiently continue through the doubling point before the excess, over-replicated regions are incised, resected, and joined. Completion requires RecBCD and involves several proteins associated with repairing double-strand breaks including, ExoI, SbcDC, and RecG. However, unlike double-strand break repair, completion occurs independently of homologous recombination and RecA. In some bacterial viruses, the completion mechanism is specifically targeted for inactivation to allow over-replication to occur during lytic replication. The results suggest that a primary cause of genomic instabilities in many double-strand-break-repair mutants arises from an impaired ability to complete replication, independent from DNA damage.

  5. All's Well That Ends Well: Shakespeare's treatment of anal fistula.

    Science.gov (United States)

    Cosman, B C

    1998-07-01

    Textual and contextual evidence suggests that the French king's fistula, a central plot device in Shakespeare's play All's Well That Ends Well, is a fistula-in-ano. Anal fistula was known to the lay public in Shakespeare's time. In addition, Shakespeare may have known of the anal fistula treatise of John Arderne, an ancestor on Shakespeare's mother's side. Shakespeare's use of anal fistula differs from all previous versions of the story, which first appeared in Boccaccio's Decameron and from its possible historical antecedent, the fistula of Charles V of France. This difference makes sense given the conventions of Elizabethan comedy, which included anal humor. It is also understandable when one looks at what wounds in different locations mean in European legend. In this light, it is not surprising that subsequent expurgations treat Boccaccio's and Shakespeare's fistulas differently, censoring only Shakespeare's. This reading has implications for the staging of All's Well That Ends Well, and for our view of the place of anal fistulas in cultural history.

  6. Psychological Well-Being and Internet Addiction among University Students

    Science.gov (United States)

    Cardak, Mehmet

    2013-01-01

    The purpose of this research is to examine the relationship between Internet addiction and psychological well-being. Participants were 479 university students who completed a questionnaire package that included the Online Cognition Scale and the Scales of Psychological Well-Being. The relationships between Internet addiction and psychological…

  7. Well data summary sheets. Vol. 18. Danish North Sea

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This eighteenth volume of Well Data Summary Sheets includes data from five North Sea wells: Jeppe-1, Ravn-2, Gert-3, Elly-2, N-22/22A (Deep Gorm). Minor corrections have been made since the first edition. The `Complete index of released wells` has been updated. Volume 27, 28 and 29 are regional volumes; volume 27 includes well data from Southern Jutland; volume 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are included in volumes 17-26 and 30. Data references are made to the revised volumes and not to the original published reference. (au)

  8. Nitrogen cycle in microbial mats: completely unknown?

    Science.gov (United States)

    Coban, O.; Bebout, B.

    2015-12-01

    Microbial mats are thought to have originated around 3.7 billion years ago, most likely in the areas around submarine hydrothermal vents, which supplied a source of energy in the form of reduced chemical species from the Earth's interior. Active hydrothermal vents are also believed to exist on Jupiter's moon Europa, Saturn's moon Enceladus, and on Mars, earlier in that planet's history. Microbial mats have been an important force in the maintenance of Earth's ecosystems and the first photosynthesis was also originated there. Microbial mats are believed to exhibit most, if not all, biogeochemical processes that exist in aquatic ecosystems, due to the presence of different physiological groups of microorganisms therein. While most microbially mediated biogeochemical transformations have been shown to occur within microbial mats, the nitrogen cycle in the microbial mats has received very little study in spite of the fact that nitrogen usually limits growth in marine environments. We will present the first results in the determination of a complete nitrogen budget for a photosynthetic microbial mat. Both in situ sources and sinks of nitrogen in photosynthetic microbial mats are being measured using stable isotope techniques. Our work has a particular focus on recently described, but poorly understood, processes, e.g., anammox and dissimilatory nitrate reduction, and an emphasis on understanding the role that nitrogen cycling may play in generating biogenic nitrogen isotopic signatures and biomarker molecules. Measurements of environmental controls on nitrogen cycling should offer insight into the nature of co-evolution of these microbial communities and their planets of origin. Identifying the spatial (microscale) as well as temporal (diel and seasonal) distribution of nitrogen transformations, e.g., rates of nitrification and denitrification, within mats, particularly with respect to the distribution of photosynthetically-produced oxygen, is anticipated. The results

  9. Complete care at Kaiser Permanente: transforming chronic and preventive care.

    Science.gov (United States)

    Kanter, Michael H; Lindsay, Gail; Bellows, Jim; Chase, Alide

    2013-11-01

    In 2004 Kaiser Permanente Southern California (KPSC) recognized the potential to improve the quality of care. Healthcare Effectiveness Data and Information Set (HEDIS) performance was below what regional leadership aspired to achieve, exceeding the 90th national percentile on only 15 of 34 measures. Beginning in 2005 regional leadership identified several system opportunities to enhance evidence-based, person-focused care. DEVELOPMENT OF COMPLETE CARE: KPSC developed and implemented a comprehensive delivery system redesign and expanded and integrated existing clinical information systems, decision support, work flows, and self-management support-collectively referred to as Complete Care. The goal of Complete Care is to transform care for healthy members, those with chronic conditions, and those with multiple comorbidities. To date, KPSC has applied Complete Care to 26 chronic conditions and areas of preventive and wellness care. Implemented in all care settings and optimizing the roles of all health care team members to maximal scope of practice, Complete Care provides evidence-based, person-focused care addressing a large set of protocol-based health needs for every individual during every encounter within the health care system. On 51 HEDIS metrics, KPSC improvement using Complete Care averaged 13.0%, compared with 5.5% improvement in the national HEDIS 50th percentile. Implementation of Complete Care at KPSC was followed by six-year quality gains that outpaced changes in the HEDIS national percentiles for many measures. Additional care gaps have been included in proactive office encounter checklists; these relate to elder care, advance directives, posthospital care, immunizations, health maintenance, and pregnancy care.

  10. Comparative evaluation of nutritional status of elderly dentulous and completely edentulous patients wearing complete dentures

    Directory of Open Access Journals (Sweden)

    Bhumita R Makwana

    2014-12-01

    evaluate the nutritional status of the subjects. The data on food consumption was converted to the calorie content of the diet and the percentage of recommended dietary allowance (RDA was calculated for the subject according to the age, gender and activity level. Statistical analysis was done using the Chi square P value test. No investigation or intervention was conducted on patients, humans or other animals hence, ethical consideration was not applicable in this study. Null hypothesis: “There is no difference in the nutritional intake of the dentulous patients and edentulous patients wearing complete dentures”. Result: It was observed in this study that only 62% of the edentulous subjects were taking fruits frequently against 88% of dentulous subjects. In the same way, while 54% of dentulous subjects were consuming nuts and oil seeds, only 36% of edentulous subjects consumed them & the result is statistically significant. There was a direct relationship between edentulousness and malnutrition. 94% of the dentulous subjects in our study were well nourished according to MNA having score from 24 to 30 against 62% of edentulous subjects. The risk of malnutrition was eight times higher in edentulous as compared to dentulous subjects, 34% & 4% respectively which is highly significant statistically. Only negligible portion was malnourished that was 2% for dentulous and 4% for edentulous subjects. Further, there was a positive correlation between the MNA score and calorie intake per day in percentage of RDA. All the subjects detected to be malnourished were taking less than 75% of RDA calorie intake. Amongst 17 edentulous subjects (34% at risk of malnutrition, more than half (n=10 were consuming less than 75% of RDA. Even though statistically insignificant, maximum subjects in both the categories belonged to >25kg/m2 (over weight that is total 60% of dentulous and 44% of edentulous subjects. On further division, 38% of dentulous and 28% of edentulous subjects were preobese

  11. Optimization of well field management

    DEFF Research Database (Denmark)

    Hansen, Annette Kirstine

    Groundwater is a limited but important resource for fresh water supply. Differ- ent conflicting objectives are important when operating a well field. This study investigates how the management of a well field can be improved with respect to different objectives simultaneously. A framework...... objectives. The sequential scheduling optimizes the management stepwise for daily time steps, and allows the final management to vary in time. The research shows that this method performs better than the constant scheduling when large variations in the hydrological conditions occur. This novel approach can...... multi-objective optimization framework has shown to be useful in optimizing the management of well fields, and it has successfully been applied to the two case studies, Hardhof and Søndersø waterworks. If the method is applied to all Danish waterworks it is estimated that 20-32 GWh/year could be saved...

  12. Quantum-Well Thermophotovoltaic Cells

    Science.gov (United States)

    Freudlich, Alex; Ignatiev, Alex

    2009-01-01

    Thermophotovoltaic cells containing multiple quantum wells have been invented as improved means of conversion of thermal to electrical energy. The semiconductor bandgaps of the quantum wells can be tailored to be narrower than those of prior thermophotovoltaic cells, thereby enabling the cells to convert energy from longer-wavelength photons that dominate the infrared-rich spectra of typical thermal sources with which these cells would be used. Moreover, in comparison with a conventional single-junction thermophotovoltaic cell, a cell containing multiple narrow-bandgap quantum wells according to the invention can convert energy from a wider range of wavelengths. Hence, the invention increases the achievable thermal-to-electrical energy-conversion efficiency. These thermophotovoltaic cells are expected to be especially useful for extracting electrical energy from combustion, waste-heat, and nuclear sources having temperatures in the approximate range from 1,000 to 1,500 C.

  13. Inhibiting scale in oil wells

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, M.J.; Adler, S.F.

    1972-09-27

    An oil well treatment is described to inhibit the formation of hard scale by precipitation from the oil well brine of scale-forming water insoluble sulfate, carbonate, and other salts. The process consists of incorporating into the oil well during a fracturing treatment, a fluid containing a solid polymeric material characterized by molecular weight in the range of 1,000 to 15,000 and a substantially linear structure, derived by the linear polymerization of at least one monoolefinically unsaturated compound through the olefinically unsaturated group. The linear structure has pendent groups, 50% of which are carboxy groups, the carboxy groups being neutralized with a sufficient proportion of at least one compound having a cation of a metal selected from alkaline earth metals, chromium, aluminum, iron, cobalt, zinc, nickel or copper to render the polymer soluble in water at 25$C to a concentration of not more than 50 ppm. (8 claims)

  14. Well test analysis for wells producing layered reservoirs with crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Prijambodo, R.; Raghavan, R.; Reynolds, A.C.

    1981-01-01

    The pressure response of a well producing a two-layer reservoir with crossflow is examined. It is shown that the flowing pressure response of a well at early times can be divided into three flow periods. The first period is one in which the reservoir behaves as if it were a stratified system (no-crossflow). This period is followed by a transitional period. During the third period, the reservoir can be described by an equivalent single-layer system. The influence of the skin regions is presented. The significance of the estimate of the skin factor obtained from a pressure test is discussed. It is shown that the nature and magnitude of the skin regions and the size of the reservoir determine the applicability of procedures that are based on single-layer systems. 17 refs.

  15. Health and Wellness Policy Ethics

    Directory of Open Access Journals (Sweden)

    Frank J. Cavico

    2013-01-01

    Full Text Available This perspective is an ethical brief overview and examination of “wellness” policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a “healthy” lifestyle. The authors address how these policies could adversely affect “non-healthy” employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace.

  16. ADVANCED CEMENTS FOR GEOTHERMAL WELLS

    Energy Technology Data Exchange (ETDEWEB)

    SUGAMA,T.

    2007-01-01

    Using the conventional well cements consisting of the calcium silicate hydrates (CaO-SiO{sub 2}-H{sub 2}O system) and calcium aluminum silicate hydrates (CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-H{sub 2}O system) for the integrity of geothermal wells, the serious concern confronting the cementing industries was their poor performance in mechanically supporting the metallic well casing pipes and in mitigating the pipe's corrosion in very harsh geothermal reservoirs. These difficulties are particularly acute in two geological regions: One is the deep hot downhole area ({approx} 1700 m depth at temperatures of {approx} 320 C) that contains hyper saline water with high concentrations of CO{sub 2} (> 40,000 ppm) in conjunction with {approx} 100 ppm H{sub 2}S at a mild acid of pH {approx} 5.0; the other is the upper well region between the well's surface and {approx} 1000 m depth at temperatures up to 200 C. The specific environment of the latter region is characterized by highly concentrated H{sub 2}SO{sub 4} (pH < 1.5) brine containing at least 5000 ppm CO{sub 2}. When these conventional cements are emplaced in these harsh environments, their major shortcoming is their susceptibility to reactions with hot CO{sub 2} and H{sub 2}SO4, thereby causing their deterioration brought about by CO{sub 2}-catalyzed carbonation and acid-initiated erosion. Such degradation not only reduced rapidly the strength of cements, lowering the mechanical support of casing pipes, but also increased the extent of permeability of the brine through the cement layer, promoting the rate of the pipe's corrosion. Severely carbonated and acid eroded cements often impaired the integrity of a well in less than one year; in the worst cases, casings have collapsed within three months, leading to the need for costly and time-consuming repairs or redrilling operations. These were the reasons why the geothermal well drilling and cementing industries were concerned about using conventional well

  17. Health and Wellness Policy Ethics

    Science.gov (United States)

    Cavico, Frank J.; Mujtaba, Bahaudin G.

    2013-01-01

    This perspective is an ethical brief overview and examination of “wellness” policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a “healthy” lifestyle. The authors address how these policies could adversely affect “non-healthy” employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace. PMID:24596847

  18. Computing Flow through Well Screens Using an Embedded Well Technique

    Science.gov (United States)

    2015-08-01

    the three- dimensional (3D) groundwater (GW) flow simulation using the finite element (FE) method. BACKGROUND: Accurate estimation of flow rates...equations of the coupled GW/well system that include the 3D Richards equation for subsurface flow and a one- dimensional (1D) steady-state equation...fluxes from multi- dimensional finite element flow simulations. ERDC TN-SWWRP-10-4. Vicksburg, MS: U.S. Army Engineer Research and Development Center

  19. Hydraulic-fracture stimulation treatments at East Mesa, Well 58-30. Geothermal-reservoir well-stimulation program

    Energy Technology Data Exchange (ETDEWEB)

    1981-02-01

    East Mesa Well 58-30 was selected for two stimulation treatments: a conventional hydraulic fracture in a deep, low permeability interval, and a dendritic fracture in a shallow, high permeability interval of completion. The well selection, pre-stimulation evaluation, fracture treatment design, and post-stimulation evaluation are presented.

  20. A semantically complete extension sequence of the system L

    Institute of Scientific and Technical Information of China (English)

    裴道武; 王国俊

    2003-01-01

    In this paper, the method of well-combined semantics and syntax proposed by Pavelka is applied to the research of the propositional calculus formal system L*. The partial constant values are taken as formulas, formulas are fuzzified in two manners of semantics and syntax, and inferring processes are fuzzified. A sequence of new extensions {Ln*} of the system L* is proposed, and the completeness of Ln* is proved.

  1. Comprehensive study of LASL Well C/T-2 Roosevelt Hot Springs KGRA, Utah, and applications to geothermal well logging

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, W.E.; Hulen, J.B.; Nielson, D.L.

    1981-02-01

    Utah State Geothermal Well 9-1 in the Roosevelt Hot Springs KGRA, Beaver County, Utah, has been donated by Phillips Petroleum Company for calibration and testing of well-logging equipment in the hot, corrosive, geothermal environment. It is the second Calibration/Test Well (C/T-2) in the Geothermal Log Interpretation Program. A study of cuttings and well logs from Well C/T-2 was completed. This synthesis and data presentation contains most of the subsurface geologic information needed to effect the total evaluation of geophysical logs acquired in this geothermal calibration/test well, C/T-2.

  2. Complete Cohomologies and Some Homological Invariants

    Institute of Scientific and Technical Information of China (English)

    Javad Asadollahi; Shokrollah Salarian

    2007-01-01

    There is a complete cohomology theory developed over a commutative noetherian ring in which injectives take the role of projectives in Vogel's construction of complete cohomology theory. We study the interaction between this complete cohomology, that is referred to as I-complete cohomology, and Vogel's one and give some sufficient conditions for their equivalence. Using I-complete functors, we assign a new homological invariant to any finitely generated module over an arbitrary commutative noetherian local ring,that would generalize Auslander's delta invariant. We generalize the results about the δ-invariant to arbitrary rings and give a sufficient condition for the vanishing of this new invariant. We also introduce an analogue of the notion of the index of a Gorenstein local ring, introduced by Auslander, for arbitrary local rings and study its behavior under flat extensions of local rings. Finally, we study the connection between the index and Loewy length of a local ring and generalize the main result of [11] to arbitrary rings.

  3. Weak Completeness of Coalgebraic Dynamic Logics

    Directory of Open Access Journals (Sweden)

    Helle Hvid Hansen

    2015-09-01

    Full Text Available We present a coalgebraic generalisation of Fischer and Ladner's Propositional Dynamic Logic (PDL and Parikh's Game Logic (GL. In earlier work, we proved a generic strong completeness result for coalgebraic dynamic logics without iteration. The coalgebraic semantics of such programs is given by a monad T, and modalities are interpreted via a predicate lifting λ whose transpose is a monad morphism from T to the neighbourhood monad. In this paper, we show that if the monad T carries a complete semilattice structure, then we can define an iteration construct, and suitable notions of diamond-likeness and box-likeness of predicate-liftings which allows for the definition of an axiomatisation parametric in T, λ and a chosen set of pointwise program operations. As our main result, we show that if the pointwise operations are "negation-free" and Kleisli composition left-distributes over the induced join on Kleisli arrows, then this axiomatisation is weakly complete with respect to the class of standard models. As special instances, we recover the weak completeness of PDL and of dual-free Game Logic. As a modest new result we obtain completeness for dual-free GL extended with intersection (demonic choice of games.

  4. Image completion algorithm based on texture synthesis

    Institute of Scientific and Technical Information of China (English)

    Zhang Hongying; Peng Qicong; Wu Yadong

    2007-01-01

    A new algorithm is proposed for completing the missing parts caused by the removal of foreground or background elements from an image of natural scenery in a visually plausible way.The major contributions of the proposed algorithm are: (1) for most natural images, there is a strong orientation of texture or color distribution.So a method is introduced to compute the main direction of the texture and complete the image by limiting the search to one direction to carry out image completion quite fast; (2) there exists a synthesis ordering for image completion.The searching order of the patches is denned to ensure the regions with more known information and the structures should be completed before filling in other regions; (3) to improve the visual effect of texture synthesis, an adaptive scheme is presented to determine the size of the template window for capturing the features of various scales.A number of examples are given to demonstrate the effectiveness of the proposed algorithm.

  5. Nozzle Bricks and Well Bricks

    Institute of Scientific and Technical Information of China (English)

    Zhang Xiaohui; Peng Xigao

    2011-01-01

    1 Scope This standard specifies the classification,brand,technical requirements,test methods,inspection rules,marking,packing,transportation,storage,and quality certificate of nozzle bricks and well bricks.This standard is applicable to unfired and fired products.

  6. CCSD Well Logging Engineering Program

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper introduces briefly the tasks and characteristics of China Continent Science Drilling (CCSD) Well Logging Engineering, the logging methods measured with CCSD, the quality control of original logging information, the logging plan of CCSD, the logging engineering management of CCSD,the logging interpretation and the results and reports made with CCSD.

  7. Uniform Algebras Over Complete Valued Fields

    CERN Document Server

    Mason, Jonathan W

    2012-01-01

    UNIFORM algebras have been extensively investigated because of their importance in the theory of uniform approximation and as examples of complex Banach algebras. An interesting question is whether analogous algebras exist when a complete valued field other than the complex numbers is used as the underlying field of the algebra. In the Archimedean setting, this generalisation is given by the theory of real function algebras introduced by S. H. Kulkarni and B. V. Limaye in the 1980s. This thesis establishes a broader theory accommodating any complete valued field as the underlying field by involving Galois automorphisms and using non-Archimedean analysis. The approach taken keeps close to the original definitions from the Archimedean setting. Basic function algebras are defined and generalise real function algebras to all complete valued fields. Several examples are provided. Each basic function algebra is shown to have a lattice of basic extensions related to the field structure. In the non-Archimedean settin...

  8. Dannie Heineman Prize Talk: Future complete cosmologies

    Science.gov (United States)

    Choquet-Bruhat, Yvonne

    2003-04-01

    Classically a solution of an equation of evolution is called global if it exists up to an infinite value of the time variable t. Such a definition is meaningless in General Relativity, where a coordinate has no physical meaning. A natural generalization is to call global, future or past, a spacetime with initial data on a manifold M which is spanned by a family of time lines with origin or end on M, which have an infinite proper length in the spacetime lorentzian metric. A more refined definition consists in imposing timelike and null geodesic completeness. A spacetime is called cosmological if the space manifolds are closed (i.e. compact). I will review recent results on future complete cosmological spacetimes, and sketch the main ideas of the proof I obtained in collaboration with V. Moncrief on the existence and asymptotic behaviour of future complete expanding cosmological spacetimes with U(1) isometry group.

  9. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A.; Kumar, Sameer; Parker, Jeffrey J.

    2014-06-03

    Completion processing of data communications instructions in a distributed computing environment, including receiving, in an active messaging interface (`AMI`) data communications instructions, at least one instruction specifying a callback function; injecting into an injection FIFO buffer of a data communication adapter, an injection descriptor, each slot in the injection FIFO buffer having a corresponding slot in a pending callback list; listing in the pending callback list any callback function specified by an instruction, incrementing a pending callback counter for each listed callback function; transferring payload data as per each injection descriptor, incrementing a transfer counter upon completion of each transfer; determining from counter values whether the pending callback list presently includes callback functions whose data transfers have been completed; calling by the AMI any such callback functions from the pending callback list, decrementing the pending callback counter for each callback function called.

  10. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A; Kumar, Sameer; Parker, Jeffrey J

    2014-05-20

    Completion processing of data communications instructions in a distributed computing environment, including receiving, in an active messaging interface (`AMI`) data communications instructions, at least one instruction specifying a callback function; injecting into an injection FIFO buffer of a data communication adapter, an injection descriptor, each slot in the injection FIFO buffer having a corresponding slot in a pending callback list; listing in the pending callback list any callback function specified by an instruction, incrementing a pending callback counter for each listed callback function; transferring payload data as per each injection descriptor, incrementing a transfer counter upon completion of each transfer; determining from counter values whether the pending callback list presently includes callback functions whose data transfers have been completed; calling by the AMI any such callback functions from the pending callback list, decrementing the pending callback counter for each callback function called.

  11. [Occlusal vertical dimension in removable complete dentures].

    Science.gov (United States)

    den Haan, R; Witter, D J

    2011-12-01

    In removable complete dentures, the occlusal vertical dimension is an important factor for patients' satisfaction with aesthetics. An excessively reduced occlusal vertical dimension is especially likely to lead to complaints about aesthetics, whereas an increased occlusal vertical dimension may lead to discomfort and a decision not to wear the complete dentures. There are various methods for determining the occlusal vertical dimension in complete dentures, based on the vertical dimension in the rest position of the mandible or on phonetics. However, none of the methods have proven to be clearly superior, in terms of reliability, than the others. The assessment of the occlusal vertical dimension will become more reliable if several methods are used simultaneously. Moreover, knowledge of the characteristics of the ageing face is essential.

  12. The complete Brans-Dicke theory

    CERN Document Server

    Kofinas, Georgios

    2015-01-01

    The most general completion of Brans-Dicke gravity is found when energy is exchanged in a uniquely defined way between the scalar field and ordinary matter. The theory contains a new parameter (integration constant from the integration procedure) and when this is switched off, Brans-Dicke theory emerges. As usually, the vacuum theory can be defined from the complete Brans-Dicke theory when the matter energy-momentum tensor vanishes. However, additionally, the complete family of vacuum theories is found, consistent with the free wave equation for the scalar field. The subclass of this family with identically covariantly conserved energy-momentum tensor is identified and, thus, can be supplemented by any equation of motion for the scalar field.

  13. Influence of projectile breakup on complete fusion

    Indian Academy of Sciences (India)

    A Mukherjee; M K Pradhan

    2010-07-01

    Complete fusion excitation functions for 11,10B+159Tb and 6,7Li+159Tb have been reported at energies around the respective Coulomb barriers. The measurements show significant suppression of complete fusion cross-sections at energies above the barrier for 10B+159Tb and 6,7Li+159Tb reactions, when compared to those for 11B+159Tb. The comparison shows that the extent of suppression of complete fusion cross-sections is correlated with the -separation energies of the projectiles. Also, the measured incomplete fusion cross-sections show that the -particle emanating channel is the favoured incomplete fusion process. Inclusive measurement of the -particles produced in 6Li+159Tb reaction has been carried out. Preliminary CDCC calculations carried out to estimate the - yield following 6Li breaking up into + fail to explain the measured -yield. Transfer processes seem to be important contributors.

  14. Objectivity versus Completeness in Quantum Mechanics

    CERN Document Server

    Garola, C; Garola, Claudio; Sozzo, Sandro

    2003-01-01

    The old Bohr--Einstein debate about the completeness of quantum mechanics (QM) was held on an ontological ground but can be transferred at a semantic level. Indeed every physical theory adopts, explicitly or not, a truth theory for its observative language, in terms of which the notions of semantic objectivity and semantic completeness can be introduced and inquired. In particular, standard QM adopts a verificationist theory of truth (empirical verificationism) that implies its semantic nonobjectivity; moreover, we show in this paper that standard QM is semantically complete, which accords with Bohr's thesis. On the other hand, one of the authors has provided an interpretation of QM (Semantic Realism, or SR, interpretation) that adopts a Tarskian theory of truth as correspondence for the observative language of QM (which was previously mantained to be impossible): according to this interpretation QM is semantically objective, yet incomplete. Thus, standard QM and the SR interpretation of QM come to opposite c...

  15. WordPress 3.7 complete

    CERN Document Server

    Król, Karol

    2013-01-01

    WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

  16. Report of a complete second branchial fistula.

    LENUS (Irish Health Repository)

    Khan, Mohammad Habibullah

    2010-08-01

    We report a case of complete congenital branchial fistula with an internal opening near the tonsillar fossa. Cysts, fistulas, and sinuses of the second branchial cleft are the most common developmental anomalies arising from the branchial apparatus. In our case, a 43-year-old man presented with a several-year history of a discharging sinus from the right side of his neck, consistent with a branchial fistula. He underwent various investigations and finally was treated with a one-stage complete surgical excision of the fistula tract. We describe the general clinical presentation, investigations, and surgical outcome of this case.

  17. Colloquial French the complete course for beginners

    CERN Document Server

    Demouy, Valérie

    2014-01-01

     COLLOQUIAL FRENCH is easy to use and completely up to date!Specially written by experienced teachers for self-study or class use, the course offers a step-by-step approach to written and spoken French. No prior knowledge of the language is required.What makes COLLOQUIAL FRENCH your best choice in personal language learning?Interactive - lots of exercises for regular practiceClear - concise grammar notesPractical - useful vocabulary and pronunciation guideComplete - including answer key and reference sectionWhether you''re a business traveller, or about to take up a daring challenge in adventu

  18. Volume growth and stochastic completeness of graphs

    CERN Document Server

    Folz, Matthew

    2012-01-01

    Given the variable-speed random walk on a weighted graph and a metric adapted to the structure of the random walk, we construct a Brownian motion on a closely related metric graph which behaves similarly to the VSRW and for which the associated intrinsic metric has certain desirable properties. Jump probabilities and moments of jump times for Brownian motion on metric graphs with varying edge lengths, jump conductances, and edge densities are computed. We use these results together with a theorem of Sturm for stochastic completeness, or non-explosiveness, on local Dirichlet spaces to prove sharp volume growth criteria in adapted metrics for stochastic completeness of graphs.

  19. CompTIA A+ complete lab manual

    CERN Document Server

    Pyles, James

    2012-01-01

    Boost your understanding of CompTIA A+ exam principles with practical, real-world exercises Designed to complement CompTIA A+ Complete Study Guide, this hands-on companion book takes you step by step through the tasks a PC technician is likely to face on any given day. It supports the theory explained in the test-prep guide with additional practical application, increasing a new PC technician's confidence and marketability. Various scenarios incorporate roadblocks that may occur on the job and explain ways to successfully complete the task at hand. In addition, each task is mapped to a specif

  20. DRILL BITS FOR HORIZONTAL WELLS

    Directory of Open Access Journals (Sweden)

    Paolo Macini

    1996-12-01

    Full Text Available This paper underlines the importance of the correct drill bit application in horizontal wells. Afler the analysis of the peculiarities of horizontal wells and drainholes drilling techniques, advantages and disadvantages of the application of both roller cone and fixed cutters drill bits have been discussed. Also, a review of the potential specific featuries useful for a correct drill bit selection in horizontal small diameter holes has been highlighted. Drill bits for these special applications, whose importance is quickly increasing nowadays, should be characterised by a design capable to deliver a good penetration rate low WOB, and, at the same time, be able to withstand high RPM without premature cutting structure failure and undergauge. Formation properties will also determine the cutting structure type and the eventual specific features for additional gauge and shoulder protection.

  1. Lithology and hydrothermal alteration determination from well logs for the Cerro Prieto Wells, Mexico

    Science.gov (United States)

    Ershaghi, I.; Ghaemian, S.; Abdassah, D.

    1981-10-01

    The characteristics of geophysical well logs are compared against the sand-shale series of the sedimentary column of the Cerro Prieto Geothermal Field, Mexico. It is shown that the changes in mineralogy of the rocks because of hydrothermal alteration are not easily detectable on the existing logs. However, if the behavior of clay minerals alone is monitored, the onset of the hydrothermally altered zones may be estimated from the well logs. The effective concentration of clay-exchange cations, Q/sub v/, is computed using the data available from conventional well logs. Zones indicating the disappearance of low temperature clays are considered hydrothermally altered formations with moderate to high permeability and temperature, and suitable for completion purposes.

  2. Implementing an effective wellness program

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, N. [Bruce Power Inc., Toronto, ON (Canada)

    2004-07-01

    Bruce Power is one of the largest nuclear sites in the world, with more than 3,700 employees. The utility strives to be one of Canada's most dynamic and innovative teams. The values of Bruce Power include: safety first; profit through progress; openness; respect and recognition; and professional and personal integrity. With respect to health and safety, Bruce Power strives to have zero medically treated injuries. Details of the healthy workplace committee were presented as well as details of the health and wellness program. Charts of health and mental health screening strategies were presented. Other programs include: an excellent benefits package; flexible working hours; family care days; banked time; an electronic suggestion box; and station condition records. It was noted that there is a strong external focus on health and safety as well. Details of community involvement and sponsorship were presented, along with details of on-site fitness facilities and fitness membership subsidies. Details of the National Quality Institute certification were also provided, including physical environment; lifestyle behaviours; and psycho-social environment. The importance of strong leadership in encouraging feedback, team talk and continuous leadership development was emphasized. Strategies to strengthen leadership include new hiring criteria for managers; management days; first line manager academy; a mentoring program; and task observation and coaching. Communication strategies include articles in weekly newspapers; monthly safety meeting video segments; posters and electronic signs; and voice mail messages from the chief executive officer. Details of the Eat Smart and Weight Challenge certification were provided. The management at human resources faces the challenge of continual change, demographics, and the fact that wellness is difficult to measure. tabs., figs.

  3. Spacecraft Architecture and well being

    Science.gov (United States)

    Ören, Ayşe

    2016-07-01

    As we embark on a journey for new homes in the new worlds to lay solid foundations, we should consider not only the survival of frontiers but also well-being of those to live in zero gravity. As a versatile science, architecture encompasses abstract human needs as well. On our new different direction in the course of the Homo sapiens evolution, we can do this with designs addressing both our needs and senses. Well-being of humans can be achieved by creating environments supporting the cognitive and social stages in the evolution process. Space stations are going through their own evolution process. Any step taken can serve as a reference for further attempts. When studying the history of architecture, window designing is discussed in a later phase, which is the case for building a spaceship as well. We lean on the places we live both physically and metaphorically. The feeling of belonging is essential here, entailing trans-humanism, which is significant since the environment therein is like a dress comfortable enough to fit in, meeting needs without any burden. Utilizing the advent of technology, we can create moods and atmospheres to regulate night and day cycles, thus we can turn claustrophobic places into cozy or dream-like places. Senses provoke a psychological sensation going beyond cultural codes as they are rooted within consciousness, which allows designers to create a mood within a space that tells a story and evokes an emotional impact. Color, amount of light, sound and odor are not superficial. As much as intangible, they are real and powerful tools with a physical presence. Tapping into induction, we can solve a whole system based on a part thereof. Therefore, fractal designs may not yield good results unless used correctly in terms of design although they are functional, which makes geometric arrangement critical.

  4. Numerical Flow Simulation for Complete Vehicle Configurations

    Science.gov (United States)

    1993-09-01

    DTIC TAB Surface Remapping Unannounced Surface Grid Optimization Justification .................. Robust Herm ite Transfinite By...Grid Optimization A Hermite transfinite interpolation algorithm with automatic evaluations of slopes and proper twist vectors is developed. A grid...max c.,daries. This information can then be utilized to complete Hermite transfinite interpolation on the parametric space and the surface grid points

  5. Doctoral Dissertations Recently Completed or in Progress.

    Science.gov (United States)

    Miller, Louise

    1994-01-01

    Reviews six doctoral dissertations currently in progress or completed during 1993 that may be of interest to those in the school library media field. Topics include technology; information seeking; literacy; the portrayal of African American males in realistic fiction picture books; and the role of youth services librarians. (KRN)

  6. Completeness properties of the minimum uncertainty states

    Science.gov (United States)

    Trifonov, D. A.

    1993-01-01

    The completeness properties of the Schrodinger minimum uncertainty states (SMUS) and of some of their subsets are considered. The invariant measures and the resolution unity measures for the set of SMUS are constructed and the representation of squeezing and correlating operators and SMUS as superpositions of Glauber coherent states on the real line is elucidated.

  7. 19 CFR 122.75 - Complete manifest.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Complete manifest. 122.75 Section 122.75 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart;...

  8. PROVIDES: A Complete Veterinary Medical Information System

    OpenAIRE

    Pollock, Roy V.H.; Fredericks, Thomas A.

    1988-01-01

    The desirable attributes of a computer-based diagnostic aid are proposed. These include ease of use, ready accessibility, sound reasoning, completeness, the ability to justify its recommendations, and a system for updating. These principles are illustrated by examples from the authors' diagnostic system (PROVIDES).

  9. Weak Completeness of Coalgebraic Dynamic Logics

    NARCIS (Netherlands)

    Kupke, C.; Hansen, H.H.

    2015-01-01

    We present a coalgebraic generalisation of Fischer and Ladner’s Propositional Dynamic Logic (PDL) and Parikh’s Game Logic (GL). In earlier work, we proved a generic strong completeness result for coalgebraic dynamic logics without iteration. The coalgebraic semantics of such programs is given by a m

  10. Weak Completeness of Coalgebraic Dynamic Logics

    NARCIS (Netherlands)

    Hansen, H.H.; Kupke, C.A.

    2015-01-01

    We present a coalgebraic generalisation of Fischer and Ladner's Propositional Dynamic Logic (PDL) and Parikh's Game Logic (GL). In earlier work, we proved a generic strong completeness result for coalgebraic dynamic logics without iteration. The coalgebraic semantics of such programs is given by a m

  11. Complete azimuthal decomposition of optical fields

    CSIR Research Space (South Africa)

    Dudley, Angela L

    2013-02-01

    Full Text Available By using digital holograms, we present a simple technique for performing a complete azimuthal decomposition of an arbitrary laser mode. The match-filter, used to perform the azimuthal decomposition, is bounded by an annular ring, allowing us...

  12. Maximizing Completion and Comprehension of Reading Assignments

    Science.gov (United States)

    Owen, Leanne R.

    The author presents self-report data from students in three upper-level undergraduate courses to illustrate the comparative effectiveness of different out-of-class assessment approaches in promoting completion and comprehension of reading assignments. Students reported agreeing or strongly agreeing that all three assignments motivated them to…

  13. Structural completeness in propositional logics of dependence

    NARCIS (Netherlands)

    Iemhoff, Rosalie; Yang, Fan

    2016-01-01

    In this paper we prove that three of the main propositional logics of dependence (including propositional dependence logic and inquisitive logic), none of which is structural, are structurally complete with respect to a class of substitutions under which the logics are closed. We obtain an analogous

  14. Endodontic treatment completion following emergency pulpectomy.

    LENUS (Irish Health Repository)

    Lynch, C D

    2010-06-01

    Emergency pulpectomy is frequently performed to relieve pain experienced by patients following acute episodes of endodontic pain, or to limit the risks of infection or possible root resorption following traumatic pulpal exposures. The aim of this study was to examine subsequent patient attendance for completion of root canal treatment following pulpectomy procedures in a dental emergency unit.

  15. Determinants of Contractual Completeness in Franchising

    NARCIS (Netherlands)

    G.W.J. Hendrikse (George); J. Windsperger (Josef)

    2010-01-01

    textabstractThe aim of the study is to explain the determinants of contractual completeness in franchise relationships by formulating and testing various propositions derived from transaction cost theory, agency theory, property rights theory, organizational capability theory and relational view of

  16. Prenatal diagnosis of congenital complete heart block.

    Science.gov (United States)

    Costa, Patrícia; Carriço, Ana; Ramalho, Carla; Matias, Alexandra; Monterroso, José; Areias, José Carlos

    2007-06-01

    Congenital complete heart block (CHB) is a conduction defect with an incidence in the general population of 1/15,000 to 1/22,000 live births. It is frequently associated with structural heart defects or maternal autoimmune disease. We describe a case of CHB associated with maternal systemic lupus erythematosus and review our previous cases and experience of CHB.

  17. Phrase Completions: An Alternative to Likert Scales.

    Science.gov (United States)

    Hodge, David R.; Gillespie, David

    2003-01-01

    Delineates the problems with Likert scales, with a particular emphasis on multidimensionality and coarse response categories, and proposes a new measurement method called "phrase completions," which has been designed to circumvent the problems inherent in Likert scales. Also conducts an exploratory test, in which Likert items were adapted to…

  18. The complete idiot's guide to risk management

    CERN Document Server

    Cortez, Annetta

    2010-01-01

    Risk. It's what business is all about. The key to success is to anticipating and managing the risks that can impact business. The Complete Idiot's Guide(r) to Risk Management provides the key information necessary to manage business risk successfully.

  19. Distinguishability of complete and unextendible product bases

    CERN Document Server

    De Rinaldis, S

    2003-01-01

    It is not always possible to distinguish multipartite orthogonal states if only local operation and classical communication (LOCC) are allowed. We prove that we cannot distinguish the states of an unextendible product bases (UPB) by LOCC even when infinite resources (infinite-dimensional ancillas, infinite number of operations). Moreover we give a method to check the LOCC distinguishability of a complete product bases.

  20. Confabulation Based Sentence Completion for Machine Reading

    Science.gov (United States)

    2010-11-01

    in bold. As we can see, 10 of the 15 sentences are completed correctly. In the third setup, we use the book “Great Expectations” by Charles ... Dickens , and a children’s story book “Why the Sea is Salt” as our test files. Neither of the books has been read during the training procedure. From each

  1. Doctoral Dissertations Recently Completed or in Progress.

    Science.gov (United States)

    Miller, Louise

    1994-01-01

    Reviews six doctoral dissertations currently in progress or completed during 1993 that may be of interest to those in the school library media field. Topics include technology; information seeking; literacy; the portrayal of African American males in realistic fiction picture books; and the role of youth services librarians. (KRN)

  2. Alternative Education Completers: A Phenomenological Study

    Science.gov (United States)

    Murray, Becky L.; Holt, Carleton R.

    2014-01-01

    The purpose of this study was to explore the elements of the alternative education experience significant to successful completion of the program. This phenomenological paradigm provided the framework for all aspects of the qualitative study. Students, parents, administrators, and staff members of two alternative programs in the southeast Kansas…

  3. Race, College Attendance and College Completion.

    Science.gov (United States)

    Kane, Thomas J.

    This study examined the college attendance and degree completion rates of black and white students using census data and data from the class of 1980 of the High School and Beyond Study. Introductory information examines the racial gap in earnings. The following sections consider: differences in educational attainment in relation to wage…

  4. A more complete library on your desktop

    CERN Multimedia

    2003-01-01

    The CERN library announces two new services: a complete database on standards containing the description of 400,000 standards, and a collection of scientific journals with more than three million articles. These include historical papers, some of them dating from the end of the 19th century.

  5. Effectiveness of the Complete Health Improvement Program

    Science.gov (United States)

    Hutchins, Mathew; Melancon, Jim; Sneed, Demarcus; Nunning, Jennifer

    2015-01-01

    Currently, heart disease and diabetes dominate society as the leading cause of death for Americans. In this study, we examined the effectiveness of a lifestyle enhancement program on factors related to the development of heart disease. The Wabash Valley Complete Health Improvement Program (CHIP) is a community-based lifestyle change program with…

  6. Complete Genome of Bacillus subtilis Myophage Grass

    OpenAIRE

    Miller, Stanton Y.; Colquhoun, Jennifer M.; Perl, Abbey L.; Chamakura, Karthik R.; Kuty Everett, Gabriel F.

    2013-01-01

    Bacillus subtilis is a ubiquitous Gram-positive model organism. Here, we describe the complete genome of B. subtilus myophage Grass. Aside from genes encoding core proteins pertinent to the life cycle of the phage, Grass has several interesting features, including an FtsK/SpoIIIE protein.

  7. Complete Genome of Bacillus thuringiensis Myophage Spock

    OpenAIRE

    Maroun, Justin W.; Whitcher, Kelvin J.; Chamakura, Karthik R.; Kuty Everett, Gabriel F.

    2013-01-01

    Bacillus thuringiensis is a Gram-positive, sporulating soil microbe with valuable pesticide-producing properties. The study of bacteriophages of B. thuringiensis could provide new biotechnological tools for the use of this bacterium. Here, we present the complete annotated genome of Spock, a myophage of B. thuringiensis, and describe its features.

  8. Complete Genome of Bacillus megaterium Podophage Pookie

    OpenAIRE

    Ladzekpo, Tsonyake N.; DeCrescenzo, Andrew J.; Hernandez, Adriana C.; Kuty Everett, Gabriel F.

    2015-01-01

    Bacteriophage Pookie is a novel podophage, isolated from soil, which infects Bacillus megaterium. B. megaterium is an important host for large-scale recombinant protein production. Here, we present the complete genome of phage Pookie and describe its core features.

  9. THE COMPLETE ASYMPTOTIC EXPANSION FOR BASKAKOV OPERATORS

    Institute of Scientific and Technical Information of China (English)

    Chungou Zhang; Quane Wang

    2007-01-01

    In this paper, we derive the complete asymptotic expansion of classical Baskakov itly in terms of Stirling number of the first and second kind and another number G(I, p). As a corollary, we also get the Voronovskaja-type result for the operators.

  10. Quantum Error Correction Beyond Completely Positive Maps

    OpenAIRE

    Shabani, A.; Lidar, D. A.

    2006-01-01

    By introducing an operator sum representation for arbitrary linear maps, we develop a generalized theory of quantum error correction (QEC) that applies to any linear map, in particular maps that are not completely positive (CP). This theory of "linear quantum error correction" is applicable in cases where the standard and restrictive assumption of a factorized initial system-bath state does not apply.

  11. Collaborative Research: Catalog Completeness and Accuracy

    Science.gov (United States)

    2013-01-01

    R. Aster, and C. Rowe (2000). Improved relative locations of clustered earthquakes using constrained multiple event location, Bull. Seism . Soc. Amer...location errors, Bull. Seism . Soc. Arner., 82, 836-859. Pavlis, G. L. (1986). Appraising earthquake hypocenter location errors: a complete, practical

  12. Posttraumatic stress disorder and completed suicide.

    Science.gov (United States)

    Gradus, Jaimie L; Qin, Ping; Lincoln, Alisa K; Miller, Matthew; Lawler, Elizabeth; Sørensen, Henrik Toft; Lash, Timothy L

    2010-03-15

    Most research regarding posttraumatic stress disorder (PTSD) and suicide has focused on suicidal ideation or attempts; no known study of the association between PTSD and completed suicide in a population-based sample has been reported. This study examined the association between PTSD and completed suicide in a population-based sample. Data were obtained from the nationwide Danish health and administrative registries, which include data on all 5.4 million residents of Denmark. All suicides between January 1, 1994, and December 31, 2006, were included, and controls were selected from a sample of all Danish residents. Using this nested case-control design, the authors examined 9,612 suicide cases and 199,306 controls matched to cases on gender, date of birth, and time. Thirty-eight suicide cases (0.40%) and 95 controls (0.05%) were diagnosed with PTSD. The odds ratio associating PTSD with suicide was 9.8 (95% confidence interval: 6.7, 15). The association between PTSD and completed suicide remained after controlling for psychiatric and demographic confounders (odds ratio = 5.3, 95% confidence interval: 3.4, 8.1). Additionally, persons with PTSD and depression had a greater rate of suicide than expected based on their independent effects. In conclusion, a registry-based diagnosis of PTSD based on International Statistical Classification of Diseases and Related Health Problems, Tenth Revision, is a risk factor for completed suicide.

  13. Complete renormalization of QCD at five loops

    Science.gov (United States)

    Luthe, Thomas; Maier, Andreas; Marquard, Peter; Schröder, York

    2017-03-01

    We present new analytical five-loop Feynman-gauge results for the anomalous dimensions of ghost field and -vertex, generalizing the known values for SU(3) to a general gauge group. Together with previously published results on the quark mass and -field anomalous dimensions and the Beta function, this completes the 5-loop renormalization program of gauge theories in that gauge.

  14. The lingualized occlusion of complete denture

    Institute of Scientific and Technical Information of China (English)

    BEN Wei-hong; Eleni Roumanas

    2008-01-01

    This article reviews the literatures dealing with the lingualized occlusion of complete denture including the origin,development and research. Lingualized occlusion is a valuable concept because many advantages of anatomic and nonanatomic occlusions are retained,satisfactory occlusion is easily obtained,balanced occlusion can be accomplished.

  15. 7 CFR 1290.6 - Completed application.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Completed application. 1290.6 Section 1290.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... condition that is external to the project and that is of direct importance to the intended beneficiaries...

  16. Double-Critical Graphs and Complete Minors

    DEFF Research Database (Denmark)

    Kawarabayashi, Ken-ichi; Pedersen, Anders Sune; Toft, Bjarne

    2010-01-01

      A connected $k$-chromatic graph $G$ is double-critical if for all edges $uv$ of $G$ the graph $G - u - v$ is $(k-2)$-colourable. The only known double-critical $k$-chromatic graph is the complete $k$-graph $K_k$. The conjecture that there are no other double-critical graphs is a special case...

  17. A Massive Chinese Floral Corpus Completed

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Through the efforts of several generations of Chinese botanists over the past 50years, a massive 80-volume corpus (in 126 books) on China's flora,Flora Reipublicae Popularis Sinicae (Chinese edition), has finally been completed. This was announced at a press meeting on March 31 in Beijing.

  18. Gates Fund Creates Plan for College Completion

    Science.gov (United States)

    Gose, Ben

    2008-01-01

    The Bill & Melinda Gates Foundation plans to spend several hundred million dollars over the next five years to double the number of low-income young people who complete a college degree or certificate program by age 26. Foundation officials described the ambitious plan to an exclusive group of education leaders, citing 2025 as a target goal. If…

  19. 14. Implementation, execution, and completion of projects.

    Science.gov (United States)

    2014-05-01

    Once an intervention has been selected for implementation, it becomes a project. Implementation of a project is a complex process and requires completion of a host of tasks. The implementation process has been deconstructed into its components so that it can be analysed and evaluated. A prerequisite for implementation is an operational plan. The tasks that require completion include: (1) reassessing current status and verifying the needs; (2) activating the operational plan; (3) setting-up and operating an administrative structure; (4) identifying, acquiring, and organising resources (including human resources); (5) assigning roles and responsibilities; (6) educating and training personnel (including mission-specific); (7) briefing staff; (8) preparing/readying resources for transport; (9) assuring project self-sufficiency; (10) arranging for personal necessities; (11) ensuring the safety of personnel and the security of equipment and supplies; (12) insuring personnel; (13) coordinating with other projects/actors; (14) coordinating with other BSF systems (role of the coordination and control centre); (15) communicating with community leaders; (16) initiating the use of standardised progress reports; (17) deploying personnel, equipment, and supplies; (18) initiating the intervention(s); (19) executing the intervention(s); (20) reporting start of interventions; (21) completing the project; and (22) completing and submitting a formal report. This deconstruction is essential in order to study the process and identify critical points of success and failure. It also is recognised that many interventions consist of many components (subfunctions), each of which may be considered a production process.

  20. Oracle database 12c the complete reference

    CERN Document Server

    Bryla, Bob

    2014-01-01

    Maintain a scalable, highly available enterprise platform and reduce complexity by leveraging the powerful new tools and cloud enhancements of Oracle Database 12c. This authoritative Oracle Press guide offers complete coverage of installation, configuration, tuning, and administration. Find out how to build and populate Oracle databases, perform effective queries, design applications, and secure your enterprise data

  1. On the range of completely bounded maps

    Directory of Open Access Journals (Sweden)

    Richard I. Loebl

    1978-01-01

    Full Text Available It is shown that if every bounded linear map from a C*-algebra α to a von Neumann algebra β is completely bounded, then either α is finite-dimensional or β⫅⊗Mn, where is a commutative von Neumann algebra and Mn is the algebra of n×n complex matrices.

  2. Motivating Intervention Strategies to Increase Homework Completion

    Science.gov (United States)

    Amerine, Melissa; Pender, Lisa; Schuler, Kristin

    2009-01-01

    The purpose of this action research project was to increase homework completion through the use of motivating strategies. There were approximately 75 students, 100 parents, and three teacher researchers involved in this study. The three intervention strategies used were 15 minutes of class time, extrinsic rewards, and assignment notebook checks.…

  3. Integral complete r-partite graphs

    NARCIS (Netherlands)

    Wang, Ligong; Li, Xueliang; Hoede, C.

    2004-01-01

    A graph is called integral if all the eigenvalues of its adjacency matrix are integers. In this paper, we give a useful sufficient and necessary condition for complete r-partite graphs to be integral, from which we can construct infinite many new classes of such integral graphs. It is proved that

  4. Phosphate based oil well cements

    Science.gov (United States)

    Natarajan, Ramkumar

    The main application of the cement in an oil well is to stabilize the steel casing in the borehole and protect it from corrosion. The cement is pumped through the borehole and is pushed upwards through the annulus between the casing and the formation. The cement will be exposed to temperature and pressure gradients of the borehole. Modified Portland cement that is being used presently has several shortcomings for borehole sealant. The setting of the Portland cement in permafrost regions is poor because the water in it will freeze even before the cement sets and because of high porosity and calcium oxide, a major ingredient it gets easily affected by the down hole gases such as carbon dioxide. The concept of phosphate bonded cements was born out of considerable work at Argonne National Laboratory (ANL) on their use in stabilization of radioactive and hazardous wastes. Novel cements were synthesized by an acid base reaction between a metal oxide and acid phosphate solution. The major objective of this research is to develop phosphate based oil well cements. We have used thermodynamics along with solution chemistry principles to select calcined magnesium oxide as candidate metal oxide for temperatures up to 200°F (93.3°C) and alumina for temperatures greater than 200°F (93.3°C). Solution chemistry helped us in selecting mono potassium phosphate as the acid component for temperatures less than 200°F (93.3°C) and phosphoric acid solution greater than 200°F (93.3°C). These phosphate cements have performance superior to common Portland well cements in providing suitable thickening time, better mechanical and physical properties.

  5. Why Mathematics Works So Well

    CERN Document Server

    Yanofsky, Noson S

    2015-01-01

    A major question in philosophy of science involves the unreasonable effectiveness of mathematics in physics. Why should mathematics, created or discovered, with nothing empirical in mind be so perfectly suited to describe the laws of the physical universe? We review the well-known fact that the symmetries of the laws of physics are their defining properties. We show that there are similar symmetries of mathematical facts and that these symmetries are the defining properties of mathematics. By examining the symmetries of physics and mathematics, we show that the effectiveness is actually quite reasonable. In essence, we show that the regularities of physics are a subset of the regularities of mathematics.

  6. Quantum Wells in Photovoltaic Cells

    CERN Document Server

    Rohr, C; Ballard, I M; Bushnell, D B; Connolly, J P; Daukes, N J Ekins-; Barnham, K W J

    2016-01-01

    The fundamental efficiency limit of a single bandgap solar cell is about 31% at one sun with a bandgap of about Eg = 1.35 eV (1), determined by the trade-off of maximising current with a smaller bandgap and voltage with a larger bandgap. Multiple bandgaps can be introduced to absorb the broad solar spectrum more efficiently. This can be realised in multi- junction cells, for example, where two or more cells are stacked on top of each other either mechanically or monolithically connected by a tunnel junction. An alternative or complementary (see section 1.4) approach is the quantum well cell (QWC).

  7. Consortium for Petroleum & Natural Gas Stripper Wells

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Joel [Pennsylvania State Univ., University Park, PA (United States)

    2011-12-01

    The United States has more oil and gas wells than any other country. As of December 31, 2004, there were more than half a million producing oil wells in the United States. That is more than three times the combined total for the next three leaders: China, Canada, and Russia. The Stripper Well Consortium (SWC) is a partnership that includes domestic oil and gas producers, service and supply companies, trade associations, academia, the Department of Energy’s Strategic Center for Natural Gas and Oil (SCNGO) at the National Energy Technology Laboratory (NETL), and the New York State Energy Research and Development Authority (NYSERDA). The Consortium was established in 2000. This report serves as a final technical report for the SWC activities conducted over the May 1, 2004 to December 1, 2011 timeframe. During this timeframe, the SWC worked with 173 members in 29 states and three international countries, to focus on the development of new technologies to benefit the U.S. stripper well industry. SWC worked with NETL to develop a nationwide request-for-proposal (RFP) process to solicit proposals from the U.S. stripper well industry to develop and/or deploy new technologies that would assist small producers in improving the production performance of their stripper well operations. SWC conducted eight rounds of funding. A total of 132 proposals were received. The proposals were compiled and distributed to an industry-driven SWC executive council and program sponsors for review. Applicants were required to make a formal technical presentation to the SWC membership, executive council, and program sponsors. After reviewing the proposals and listening to the presentations, the executive council made their funding recommendations to program sponsors. A total of 64 projects were selected for funding, of which 59 were fully completed. Penn State then worked with grant awardees to issue a subcontract for their approved work. SWC organized and hosted a total of 14 meetings

  8. Excitons in asymmetric quantum wells

    Science.gov (United States)

    Grigoryev, P. S.; Kurdyubov, A. S.; Kuznetsova, M. S.; Ignatiev, I. V.; Efimov, Yu. P.; Eliseev, S. A.; Petrov, V. V.; Lovtcius, V. A.; Shapochkin, P. Yu.

    2016-09-01

    Resonance dielectric response of excitons is studied for the high-quality InGaAs/GaAs heterostructures with wide asymmetric quantum wells (QWs). To highlight effects of the QW asymmetry, we have grown and studied several heterostructures with nominally square QWs as well as with triangle-like QWs. Several quantum confined exciton states are experimentally observed as narrow exciton resonances. A standard approach for the phenomenological analysis of the profiles is generalized by introducing different phase shifts for the light waves reflected from the QWs at different exciton resonances. Good agreement of the phenomenological fit to the experimentally observed exciton spectra for high-quality structures allowed us to reliably obtain parameters of the exciton resonances: the exciton transition energies, the radiative broadenings, and the phase shifts. A direct numerical solution of the Schrödinger equation for the heavy-hole excitons in asymmetric QWs is used for microscopic modeling of the exciton resonances. Remarkable agreement with the experiment is achieved when the effect of indium segregation is taken into account. The segregation results in a modification of the potential profile, in particular, in an asymmetry of the nominally square QWs.

  9. Computer Security: Well fought, FP!

    CERN Multimedia

    Stefan Lueders, Computer Security Team

    2015-01-01

    We are used to spam and phishing emails. But at the end of last year, a very special email struck one of our colleagues in the FP Department.   An accountant was gently asked in an email from “Rolf.Heuer@cern.ch” to prepare a financial transaction - in the strictest confidence. A phone call from the beneficiary to the accountant was made in an attempt to support this request. Despite being instructed not to talk to anyone, the e-mail, the phone conversation and the circumstances were all so suspicious that our colleague consulted his hierarchy, the internal audit service and us. Well done, FP Department! This is a rare case of an attempt at “social engineering”, i.e. luring someone into doing something detrimental to the Organization. The e-mail was fake. While it appeared to come from “Rolf.Heuer@cern.ch”, it actually came from an alleged fraudster outside CERN. The e-mail and the phone call showed that he was well prepared and dire...

  10. The Complete Semiconductor Transistor and Its Incomplete Forms

    Institute of Scientific and Technical Information of China (English)

    Jie Binbin; Sah Chih-Tang

    2009-01-01

    This paper describes the definition of the complete transistor. For semiconductor devices, the complete transistor is always bipolar, namely, its electrical characteristics contain both electron and hole currents controlled by their spatial charge distributions. Partially complete or incomplete transistors, via coined names or/and designed physical geometries, included the 1949 Shockley p/n junction transistor (later called Bipolar Junction Transistor,BJT), the 1952 Shockley unipolar 'field-effect' transistor (FET, later called the p/n Junction Gate FET or JGFET), as well as the field-effect transistors introduced by later investigators. Similarities between the surface-channel MOS-gate FET (MOSFET) and the volume-channel BJT are illustrated. The bipolar currents, identified by us in a recent nanometer FET with 2-MOS-gates on thin and nearly pure silicon base, led us to the recognition of the physical makeup and electrical current and charge compositions of a complete transistor and its extension to other three or more terminal signal processing devices, and also the importance of the terminal contacts.

  11. Complete convergence and complete moment convergence for negatively associated sequences of random variables

    Directory of Open Access Journals (Sweden)

    Qunying Wu

    2016-06-01

    Full Text Available Abstract In this paper, we study the complete convergence and complete moment convergence for negatively associated sequences of random variables with E X = 0 $\\mathbb{E}X=0$ , E exp ( ln α | X | 1 $\\alpha>1$ . As a result, we extend some complete convergence and complete moment convergence theorems for independent random variables to the case of negatively associated random variables without necessarily imposing any extra conditions. Our results generalize corresponding results obtained by Gut and Stadtmüller (Stat. Probab. Lett. 81:1486-1492, 2011 and Qiu and Chen (Stat. Probab. Lett. 91:76-82, 2014.

  12. Completing the Web of $Z_3$ - Quotients of Complete Intersection Calabi-Yau Manifolds

    CERN Document Server

    Candelas, Philip

    2010-01-01

    We complete the study of smooth $Z_3$-quotients of complete intersection Calabi-Yau threefolds by discussing the six new manifolds that admit free $Z_3$ actions that were discovered discovered recently by Braun. These manifolds were missed in an earlier work and complete the web of smooth $Z_3$-quotients in a nice way. We discuss the transitions between these manifolds and include also the other manifolds of the web. This leads to the conclusion that the web of $Z_3$-free quotients of complete intersection Calabi-Yau threefolds is connected by conifold transitions.

  13. Specificity and completion time distributions of biochemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Munsky, Brian [Los Alamos National Laboratory; Nemenman, Ilya [Los Alamos National Laboratory; Bel, Golan [Los Alamos National Laboratory

    2009-01-01

    In order to produce specific complex structures from a large set of similar biochemical building blocks, many biochemical systems require high sensitivity to small molecular differences. The first and most common mqdel used to explain this high specificity is kinetic proofreading, which has been extended to a variety of systems from detection of DNA mismatch to cell signaling processes. While the specification properties of the kinetic proofreading model are well known and were studied in various contexts, very little is known about its temporal behavior. In this work, we study the dynamical properties of discrete stochastic two-branch kinetic proofreading schemes. Using the Laplace transform of the corresponding chemical master equation, we obtain an analytical solution for the completion time distribution. In particular we provide expressions for the specificity and the mean and the variance of the process completion times. We also show that, for a wide range of parameters a process distinguishing between two different products can be reduced to a much simpler three point process. Our results allow for the systematic study of the interplay between specificity and completion times as well as testing the validity of the kinetic proofreading model in biological systems.

  14. Well Monitoring System For EGS

    Energy Technology Data Exchange (ETDEWEB)

    Normann, Randy [Perma Works LLC, Pattonville, TX (United States); Glowka, Dave [Perma Works LLC, Pattonville, TX (United States); Normann, Charles [Perma Works LLC, Pattonville, TX (United States); Parker, James [Electrochemical Systems Inc, Knoxville, TN (United States); Caja, Josip [Electrochemical Systems Inc, Knoxville, TN (United States); Dustan, Don [Electrochemical Systems Inc, Knoxville, TN (United States); Caja, Mario [Electrochemical Systems Inc, Knoxville, TN (United States); Sariri, Kouros [Frequency Management Int. Inc., Huntington Beach, CA (United States); Beal, Craig [MajiQ Technologies Inc., Somerville, MA (United States)

    2017-02-26

    This grant is a collection of projects designed to move aircraft high temperature electronics technology into the geothermal industry. Randy Normann is the lead. He licensed the HT83SNL00 chip from Sandia National Labs. This chip enables aircraft developed electronics for work within a geothermal well logging tool. However, additional elements are needed to achieve commercially successful logging tools. These elements are offered by a strong list of industrial partners on this grant as: Electrochemical Systems Inc. for HT Rechargeable Batteries, Frequency Management Systems for 300C digital clock, Sandia National Labs for experts in high temperature solder, Honeywell Solid-State Electronics Center for reprogrammable high temperature memory. During the course of this project MagiQ Technologies for high temperature fiber optics.

  15. Biomedical wellness challenges and opportunities

    Science.gov (United States)

    Tangney, John F.

    2012-06-01

    The mission of ONR's Human and Bioengineered Systems Division is to direct, plan, foster, and encourage Science and Technology in cognitive science, computational neuroscience, bioscience and bio-mimetic technology, social/organizational science, training, human factors, and decision making as related to future Naval needs. This paper highlights current programs that contribute to future biomedical wellness needs in context of humanitarian assistance and disaster relief. ONR supports fundamental research and related technology demonstrations in several related areas, including biometrics and human activity recognition; cognitive sciences; computational neurosciences and bio-robotics; human factors, organizational design and decision research; social, cultural and behavioral modeling; and training, education and human performance. In context of a possible future with automated casualty evacuation, elements of current science and technology programs are illustrated.

  16. Release of crowding by pattern completion.

    Science.gov (United States)

    Manassi, Mauro; Hermens, Frouke; Francis, Gregory; Herzog, Michael H

    2015-01-01

    In crowding, target perception deteriorates in the presence of flanking elements. Crowding is classically explained by low-level mechanisms such as pooling or feature substitution. However, we have previously shown that perceptual grouping between the target and flankers, rather than low-level mechanisms, determines crowding. There are many grouping cues that can determine crowding, such as low- and high-level feature similarity, low- and high-level pattern regularity, and good Gestalt. Here we show that pattern completion, another grouping cue that is important for crowding in foveal vision, is also important in peripheral vision. We also describe computer simulations that show how pattern completion, and crowding in general, can be partly explained by recurrent processing.

  17. Birationally rigid Fano complete intersections. II

    CERN Document Server

    Pukhlikov, Aleksandr

    2011-01-01

    We prove that a generic (in the sense of Zariski topology) Fano complete intersection $V$ of the type $(d_1,...,d_k)$ in ${\\mathbb P}^{M+k}$, where $d_1+...+d_k=M+k$, is birationally superrigid if $M\\geq 7$, $M\\geq k+3$ and $\\mathop{\\rm max} \\{d_i\\}\\geq 4$. In particular, on the variety $V$ there is exactly one structure of a Mori fibre space (or a rationally connected fibre space), the groups of birational and biregular self-maps coincide, $\\mathop{\\rm Bir} V= \\mathop{\\rm Aut} V$, and the variety $V$ is non-rational. This fact covers a considerably larger range of complete intersections than the result of [J. reine angew. Math. {\\bf 541} (2001), 55-79], which required the condition $M\\geq 2k+1$. The paper is dedicated to the memory of Eckart Viehweg.

  18. A complete discrimination system for polynomials

    Institute of Scientific and Technical Information of China (English)

    杨路; 侯晓荣; 曾振柄

    1996-01-01

    Given a polynomial with symbolic/literal coefficients,a complete discrimination system is a set of explicit expressions in terms of the coefficients,which is sufficient for determining the numbers and multiplicities of the real and imaginary roots.Though it is of great significance,such a criterion for root-classification has never been given for polynomials with degrees greater than 4.The lack of efficient tools in this aspect extremely prevents computer implementations for Tarski’s and other methods in automated theorem proving.To remedy this defect,a generic algorithm is proposed to produce a complete discrimination system for a polynomial with any degrees.This result has extensive applications in various fields,and its efficiency was demonstrated by computer implementations.

  19. Similarity problems and completely bounded maps

    CERN Document Server

    Pisier, Gilles

    2001-01-01

    These notes revolve around three similarity problems, appearing in three different contexts, but all dealing with the space B(H) of all bounded operators on a complex Hilbert space H. The first one deals with group representations, the second one with C* -algebras and the third one with the disc algebra. We describe them in detail in the introduction which follows. This volume is devoted to the background necessary to understand these three problems, to the solutions that are known in some special cases and to numerous related concepts, results, counterexamples or extensions which their investigation has generated. While the three problems seem different, it is possible to place them in a common framework using the key concept of "complete boundedness", which we present in detail. Using this notion, the three problems can all be formulated as asking whether "boundedness" implies "complete boundedness" for linear maps satisfying certain additional algebraic identities. Two chapters have been added on the HALMO...

  20. Complete Solutions to Extended Stokes' Problems

    Directory of Open Access Journals (Sweden)

    Chi-Min Liu

    2008-01-01

    Full Text Available The main object of the present study is to theoretically solve the viscous flow of either a finite or infinite depth, which is driven by moving plane(s. Such a viscous flow is usually named as Stokes' first or second problems, which indicates the fluid motion driven by the impulsive or oscillating motion of the boundary, respectively. Traditional Stokes' problems are firstly revisited, and three extended problems are subsequently examined. Using some mathematical techniques and integral transforms, complete solutions which can exactly capture the flow characteristics at any time are derived. The corresponding steady-state and transient solutions are readily determined on the basis of complete solutions. Current results have wide applications in academic researches and are of significance for future studies taking more boundary conditions and non-Newtonian fluids into account.

  1. Lifting fixed points of completely positive semigroups

    CERN Document Server

    Prunaru, Bebe

    2011-01-01

    Let $\\{\\phi_s\\}_{s\\in S}$ be a commutative semigroup of completely positive and contractive linear maps acting on a von Neumann algebra $N$. Assume there exists a semigroup $\\{\\alpha_s\\}_{s\\in S}$ of *-endomorphisms of some larger von Neumann algebra $M\\supset N$ and a projection $p\\in M$ with $N=pMp$ such that $\\alpha_s(1-p)\\le 1-p$ for every $s\\in S$ and $\\phi_s(y)=p\\alpha_s(y)p$ for all $y\\in N$. If $\\inf_{s\\in S}\\alpha_s(1-p)=0$ then we show that the map $E:M\\to N$ defined by $E(x)=pxp$ for $x\\in M$ induces a complete isometry between the fixed point spaces of $\\{\\alpha_s\\}_{s\\in S}$ and $\\{\\phi_s\\}_{s\\in S}$.

  2. Shape Completion from a Single RGBD Image.

    Science.gov (United States)

    Li, Dongping; Shao, Tianjia; Wu, Hongzhi; Zhou, Kun

    2017-07-01

    We present a novel approach for constructing a complete 3D model for an object from a single RGBD image. Given an image of an object segmented from the background, a collection of 3D models of the same category are non-rigidly aligned with the input depth, to compute a rough initial result. A volumetric-patch-based optimization algorithm is then performed to refine the initial result to generate a 3D model that not only is globally consistent with the overall shape expected from the input image but also possesses geometric details similar to those in the input image. The optimization with a set of high-level constraints, such as visibility, surface confidence and symmetry, can achieve more robust and accurate completion over state-of-the art techniques. We demonstrate the efficiency and robustness of our approach with multiple categories of objects with various geometries and details, including busts, chairs, bikes, toys, vases and tables.

  3. Complete Reionization Constraints from Planck 2015 Polarization

    CERN Document Server

    Heinrich, Chen He; Hu, Wayne

    2016-01-01

    We conduct an analysis of the Planck 2015 data that is complete in reionization observables from the large angle polarization $E$-mode spectrum in the redshift range $6 15$ component to the optical depth but prefer it at the $2\\sigma$ level. This preference is associated with excess power in the multipole range $10 \\lesssim \\ell \\lesssim 20$ and may indicate high redshift ionization sources or unaccounted for systematics and foregrounds in the 2015 data.

  4. The complete guide to DAZ Studio 4

    CERN Document Server

    Ciccone, Paolo

    2013-01-01

    The book builds up a complete project from scratch and demonstrates the power of DAZ to create life-like characters. The book is replete with detailed examples and instructions on creating a tailor-made marvel out of scratch.This book can be used by anybody who has DAZ Studio 4, regardless of their level of familiarity with the program or the concepts of 3D art.

  5. On the completeness of quantum computation models

    CERN Document Server

    Arrighi, Pablo

    2010-01-01

    The notion of computability is stable (i.e. independent of the choice of an indexing) over infinite-dimensional vector spaces provided they have a finite "tensorial dimension". Such vector spaces with a finite tensorial dimension permit to define an absolute notion of completeness for quantum computation models and give a precise meaning to the Church-Turing thesis in the framework of quantum theory. (Extra keywords: quantum programming languages, denotational semantics, universality.)

  6. Completeness of the ring of polynomials

    DEFF Research Database (Denmark)

    Thorup, Anders

    2015-01-01

    Consider the polynomial ring R:=k[X1,…,Xn]R:=k[X1,…,Xn] in n≥2n≥2 variables over an uncountable field k. We prove that R   is complete in its adic topology, that is, the translation invariant topology in which the non-zero ideals form a fundamental system of neighborhoods of 0. In addition we pro...

  7. A compactness theorem for complete Ricci shrinkers

    CERN Document Server

    Haslhofer, Robert

    2010-01-01

    We prove precompactness in an orbifold Cheeger-Gromov sense of complete gradient Ricci shrinkers with a lower bound on their entropy and a local integral Riemann bound. We do not need any pointwise curvature assumptions, volume or diameter bounds. In dimension four, under a technical assumption, we can replace the local integral Riemann bound by an upper bound for the Euler characteristic. The proof relies on a Gauss-Bonnet with cutoff argument.

  8. Spiraling toward market completeness and financial instability

    OpenAIRE

    2009-01-01

    I study the limit of a large random economy, where a set of consumers invests in financial instruments engineered by banks, in order to optimize their future consumption. This exercise shows that, even in the ideal case of perfect competition, where full information is available to all market participants, the equilibrium develops a marked vulnerability (or susceptibility) to market imperfections, as markets approach completeness and transaction costs vanish. The decrease in transaction costs...

  9. Blind RRT: A probabilistically complete distributed RRT

    KAUST Repository

    Rodriguez, Cesar

    2013-11-01

    Rapidly-Exploring Random Trees (RRTs) have been successful at finding feasible solutions for many types of problems. With motion planning becoming more computationally demanding, we turn to parallel motion planning for efficient solutions. Existing work on distributed RRTs has been limited by the overhead that global communication requires. A recent approach, Radial RRT, demonstrated a scalable algorithm that subdivides the space into regions to increase the computation locality. However, if an obstacle completely blocks RRT growth in a region, the planning space is not covered and is thus not probabilistically complete. We present a new algorithm, Blind RRT, which ignores obstacles during initial growth to efficiently explore the entire space. Because obstacles are ignored, free components of the tree become disconnected and fragmented. Blind RRT merges parts of the tree that have become disconnected from the root. We show how this algorithm can be applied to the Radial RRT framework allowing both scalability and effectiveness in motion planning. This method is a probabilistically complete approach to parallel RRTs. We show that our method not only scales but also overcomes the motion planning limitations that Radial RRT has in a series of difficult motion planning tasks. © 2013 IEEE.

  10. Schwarzschild black-holes are quantum complete

    CERN Document Server

    Hofmann, Stefan

    2016-01-01

    The singularity theorem by Hawking and Penrose qualifies Schwarzschild black-holes as geodesic incomplete space-times. Albeit this is a mathematically rigorous statement, it requires an operational framework that allows to probe the space-like singularity via a measurement process. Any such framework necessarily has to be based on quantum theory. As a consequence, the notion of classical completeness needs to be adapted to situations where the only adequate description is in terms of quantum fields in dynamical space-times. It is shown that Schwarzschild black-holes turn out to be complete when probed by self-interacting quantum fields in the ground state and in excited states. The measure for populating quantum fields on hypersurfaces in the vicinity of the black-hole singularity goes to zero towards the singularity. This statement is robust under non-Gaussian deformations of and excitations relative to the ground state. The clash of completeness cultures as exemplified with black holes is discussed.

  11. Complete Intersection Fibers in F-Theory

    CERN Document Server

    Braun, Volker; Keitel, Jan

    2014-01-01

    Global F-theory compactifications whose fibers are realized as complete intersections form a richer set of models than just hypersurfaces. The detailed study of the physics associated with such geometries depends crucially on being able to put the elliptic fiber into Weierstrass form. While such a transformation is always guaranteed to exist, its explicit form is only known in a few special cases. We present a general algorithm for computing the Weierstrass form of elliptic curves defined as complete intersections of different codimensions and use it to solve all cases of complete intersections of two equations in an ambient toric variety. Using this result, we determine the toric Mordell-Weil groups of all 3134 nef partitions obtained from the 4319 three-dimensional reflexive polytopes and find new groups that do not exist for toric hypersurfaces. As an application, we construct several models that cannot be realized as toric hypersurfaces, such as the first toric SU(5) GUT model in the literature with disti...

  12. Musical stem completion: humming that note.

    Science.gov (United States)

    Warker, Jill A; Halpern, Andrea R

    2005-01-01

    This study looked at how people store and retrieve tonal music explicitly and implicitly using a production task. Participants completed an implicit task (tune stem completion) followed by an explicit task (cued recall). The tasks were identical except for the instructions at test time. They listened to tunes and were then presented with tune stems from previously heard tunes and novel tunes. For the implicit task, they were asked to sing a note they thought would come next musically. For the explicit task, they were asked to sing the note they remembered as coming next. Experiment 1 found that people correctly completed significantly more old stems than new stems. Experiment 2 investigated the characteristics of music that fuel retrieval by varying a surface feature of the tune (same timbre or different timbre) from study to test and the encoding task (semantic or nonsemantic). Although we did not find that implicit and explicit memory for music were significantly dissociated for levels of processing, we did find that surface features of music affect semanticjudgments and subsequent explicit retrieval.

  13. Successful replantation in 10-digit complete amputations.

    Science.gov (United States)

    Qing-tai, L; Chang-qing, J Z; Ke-fei, Y; Sha-ling, C; Jan, L; Zun-ying, L

    1996-08-01

    We report a case of successful replantation of 10-digit complete amputations. The conditions of the wounds over the ends of the 10 amputated digits are bound to vary; some are too severe to be replanted, while others may be light and easy for replantation. We reported a case of 10-digit complete amputations, with severe avulsion injuries over four fingers. Appropriate measures were taken during surgery, and the replanted digits all survived. The replantation operation was done by a team of surgeons, although the surgeons were physically challenged by the long and difficult procedures. However, it was the great pleasure of the surgeons to work hard and whole-heartedly for the benefit of the patient. Postoperative physiotherapy and exercises were done. After 6 months, the functions of both hands had been largely recovered. Complete amputations of 10 digits as a rule result in multiple complicated wounds. The replantation procedure for these conditions is not an easy endeavor because there are numerous blood vessels that need to be anastomosed, the time of the operation will be dreadfully long, and also there is the danger of the occurrence of vascular crises during the postoperative period. It is difficult to achieve successful survival of all 10 amputated digits after replantation.

  14. Robotic extended pyelolithotomy for complete staghorn calculus.

    Science.gov (United States)

    Sotelo, Rene; Astigueta, Juan Carlos; Giedelman, Camilo; de Andrade, Robert; Carmona, Oswaldo; Ramirez, Daniel; Clavijo, Rafael

    2010-08-01

    Staghorn stones represent a therapeutic challenge to urologists. We present our experience with laparoscopic extended pyelolithotomy for treatment of staghorn and complex renal calculi in highly selected cases. This approach provides the principles of open surgery with the advantages of minimally invasive surgery. We describe our experience with robot-assisted extended pyelolithotomy for complex coralliform calculi. Since January 2007, robotic extended pyelolithotomy has been performed by transperitoneal approach in two patients with complete coralliform lithiasis (calculi average size 8 cm). One patient had history of percutaneous nephrolithotomy. Demographic and operative data were collected. All procedures were technically successful without need for open conversion. Mean estimated blood loss was 175 ml (range 50-300 ml), and mean operative time was 150 min (range 120-150 min). A perinephric drain was employed in one patient with duration of 5 days. Postoperative imaging confirmed complete stone clearance. Robotic extended pyelolithotomy is a feasible and reproducible procedure for removal of complete and partial staghorn calculi in selected patients with complex nephrolithiasis. This approach might limit the role of open surgery for these calculi, but further publications with more cases are necessary to further define its utility.

  15. Visual Equivalence and Amodal Completion in Cuttlefish.

    Science.gov (United States)

    Lin, I-Rong; Chiao, Chuan-Chin

    2017-01-01

    Modern cephalopods are notably the most intelligent invertebrates and this is accompanied by keen vision. Despite extensive studies investigating the visual systems of cephalopods, little is known about their visual perception and object recognition. In the present study, we investigated the visual processing of the cuttlefish Sepia pharaonis, including visual equivalence and amodal completion. Cuttlefish were trained to discriminate images of shrimp and fish using the operant conditioning paradigm. After cuttlefish reached the learning criteria, a series of discrimination tasks were conducted. In the visual equivalence experiment, several transformed versions of the training images, such as images reduced in size, images reduced in contrast, sketches of the images, the contours of the images, and silhouettes of the images, were used. In the amodal completion experiment, partially occluded views of the original images were used. The results showed that cuttlefish were able to treat the training images of reduced size and sketches as the visual equivalence. Cuttlefish were also capable of recognizing partially occluded versions of the training image. Furthermore, individual differences in performance suggest that some cuttlefish may be able to recognize objects when visual information was partly removed. These findings support the hypothesis that the visual perception of cuttlefish involves both visual equivalence and amodal completion. The results from this research also provide insights into the visual processing mechanisms used by cephalopods.

  16. Visual Equivalence and Amodal Completion in Cuttlefish

    Science.gov (United States)

    Lin, I-Rong; Chiao, Chuan-Chin

    2017-01-01

    Modern cephalopods are notably the most intelligent invertebrates and this is accompanied by keen vision. Despite extensive studies investigating the visual systems of cephalopods, little is known about their visual perception and object recognition. In the present study, we investigated the visual processing of the cuttlefish Sepia pharaonis, including visual equivalence and amodal completion. Cuttlefish were trained to discriminate images of shrimp and fish using the operant conditioning paradigm. After cuttlefish reached the learning criteria, a series of discrimination tasks were conducted. In the visual equivalence experiment, several transformed versions of the training images, such as images reduced in size, images reduced in contrast, sketches of the images, the contours of the images, and silhouettes of the images, were used. In the amodal completion experiment, partially occluded views of the original images were used. The results showed that cuttlefish were able to treat the training images of reduced size and sketches as the visual equivalence. Cuttlefish were also capable of recognizing partially occluded versions of the training image. Furthermore, individual differences in performance suggest that some cuttlefish may be able to recognize objects when visual information was partly removed. These findings support the hypothesis that the visual perception of cuttlefish involves both visual equivalence and amodal completion. The results from this research also provide insights into the visual processing mechanisms used by cephalopods. PMID:28220075

  17. Complete intersection fibers in F-theory

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Volker [Mathematical Institute, University of Oxford,24-29 St Giles’, Oxford, OX1 3LB (United Kingdom); Grimm, Thomas W.; Keitel, Jan [Max-Planck-Institut für Physik,Föhringer Ring 6, 80805 Munich (Germany)

    2015-03-24

    Global F-theory compactifications whose fibers are realized as complete intersections form a richer set of models than just hypersurfaces. The detailed study of the physics associated with such geometries depends crucially on being able to put the elliptic fiber into Weierstrass form. While such a transformation is always guaranteed to exist, its explicit form is only known in a few special cases. We present a general algorithm for computing the Weierstrass form of elliptic curves defined as complete intersections of different codimensions and use it to solve all cases of complete intersections of two equations in an ambient toric variety. Using this result, we determine the toric Mordell-Weil groups of all 3134 nef partitions obtained from the 4319 three-dimensional reflexive polytopes and find new groups that do not exist for toric hypersurfaces. As an application, we construct several models that cannot be realized as toric hypersurfaces, such as the first toric SU(5) GUT model in the literature with distinctly charged 10 representations and an F-theory model with discrete gauge group ℤ{sub 4} whose dual fiber has a Mordell-Weil group with ℤ{sub 4} torsion.

  18. The Long Valley Well: Phase II operations

    Energy Technology Data Exchange (ETDEWEB)

    Finger, J.T.

    1992-01-01

    Phase II of the Long Valley Exploratory Well was completed to a depth of 7588 feet in November 1991. The drilling comprised two sub-phases: (1) drilling 17-1/2 inch hole from the Phase I casing shoe at 2558 feet to a depth of 7130 feet, plugging back to 6826 feet, and setting 13-3/8 inch casing at 6825 feet, all during August--September 1991; and (2) returning in November to drill a 3.85-inch core hole deviated out of the previous wellbore at 6868 feet and extending to 7588 feet. Ultimate depth of the well is planned to be 20,000 feet, or at a bottomhole temperature of 500{degrees}C, whichever comes first. Total cost of this drilling phase was approximately $2.3 million, and funding was shared about equally between the California Energy Commission and the Department of Energy. Phase II scientific work will commence in July 1992 and will be supported by DOE Office of Basic Energy Sciences, DOE Geothermal Division, and other funding sources.

  19. The Long Valley Well - Phase II Operations

    Energy Technology Data Exchange (ETDEWEB)

    Finger, John T.

    1992-03-24

    Phase II of the Long Valley Exploratory Well was completed to a depth of 7588 feet in November 1991. The drilling comprised two sub-phases: (1) drilling 17-1/2 inch hole from the Phase I casing shoe at 2558 feet to a depth of 7130 feet, plugging back to 6826 feet, and setting 13-3/8 inch casing at 6825 feet, all during August-September 1991; and (2) returning in November to drill a 3.85-inch core hole deviated out of the previous wellbore at 6808 feet and extending to 7588 feet. Ultimate depth of the well is planned to be 20,000 feet, or at a bottomhole temperature of 500 C, whichever comes first. Total cost of this drilling phase was approximately $2.3 million, and funding was shared about equally between the California Energy Commission and the Department of Energy. Phase II scientific work will commence in July 1992 and will be supported by DOE Office of Basic Energy Sciences, DOE Geothermal Division, and other funding sources.

  20. Effects of Completeness and Purity on Cluster Dark Energy Constraints

    CERN Document Server

    Aguena, Michel

    2016-01-01

    The statistical properties of galaxy clusters can only be used for cosmological purposes if observational effects related to cluster detection are accurately characterized. These effects include the selection function associated to cluster finder algorithms and survey strategy. The importance of the selection becomes apparent when different cluster finders are applied to the same galaxy catalog, producing different cluster samples. We consider parametrized functional forms for the observable-mass relation, its scatter as well as the completeness and purity of cluster samples, and study how prior knowledge on these function parameters affects dark energy constraints derived from cluster statistics. Under the assumption that completeness and purity reach 50 % at masses around 10^{13.5} Msun/h, we find that self-calibration of selection parameters in current and upcoming cluster surveys is possible, while still allowing for competitive dark energy constraints. We consider a fiducial survey with specifications si...