WorldWideScience

Sample records for weight bearing control

  1. Early weight bearing versus delayed weight bearing in medial opening wedge high tibial osteotomy: a randomized controlled trial.

    Science.gov (United States)

    Lansdaal, Joris Radboud; Mouton, Tanguy; Wascher, Daniel Charles; Demey, Guillaume; Lustig, Sebastien; Neyret, Philippe; Servien, Elvire

    2017-12-01

    The need for a period of non-weight bearing after medial opening wedge high tibial osteotomy remains controversial. It is hypothesized that immediate weight bearing after medial opening wedge high tibial osteotomy would have no difference in functional scores at one year compared to delayed weight bearing. Fifty patients, median age 54 years (range 40-65), with medial compartment osteoarthritis, underwent a medial opening wedge high tibial osteotomy utilizing a locking plate without bone grafting. Patients were randomized into an Immediate or a Delayed (2 months) weight bearing group. All patients were assessed at one-year follow-up and the two groups compared. The primary outcome measure was the IKS score. Secondary outcome measures included the IKDC score, the VAS pain score and rate of complications. The functional scores significantly improved in both groups. The IKS score increased from 142 ± 31 to 171 ± 26 in the Immediate group (p bearing after medial opening wedge high tibial osteotomy had no effect on functional scores at 1 year follow-up and did not significantly increase the complication rate. Immediate weight bearing after medial opening wedge high tibial osteotomy appears to be safe and can allow some patients a quicker return to activities of daily living and a decreased convalescence period. II.

  2. Weight bearing or non-weight bearing after surgically fixed ankle fractures, the WOW! Study : study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Briet, Jan Paul; Houwert, Roderick M; Smeeing, Diederik P J; Pawiroredjo, Janity S; Kelder, Johannes C; Lansink, Koen W; Leenen, Luke P H; van der Zwaal, Peer; van Zutphen, Stephan W A M; Hoogendoorn, Jochem M; van Heijl, Mark; Verleisdonk, Egbert J M M; van Lammeren, Guus W; Segers, Michiel J; Hietbrink, Falco

    2015-01-01

    BACKGROUND: The optimal post-operative care regimen after surgically fixed Lauge Hansen supination exorotation injuries remains to be established. This study compares whether unprotected weight bearing as tolerated is superior to protected weight bearing and unprotected non-weight bearing in terms

  3. Weight bearing or non-weight bearing after surgically fixed ankle fractures, the WOW! Study : Study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Briet, Jan Paul; Houwert, Roderick M.; Smeeing, Diederik P. J.; Pawiroredjo, Janity S.; Kelder, Johannes C.; Lansink, Koen W.; Leenen, Luke P. H.; van der Zwaal, Peer; van Zutphen, Stephan W. A. M.; Hoogendoorn, Jochem M.; van Heijl, Mark; Verleisdonk, Egbert J. M. M.; van Lammeren, Guus W.; Segers, Michiel J.; Hietbrink, Falco

    2015-01-01

    Background The optimal post-operative care regimen after surgically fixed Lauge Hansen supination exorotation injuries remains to be established. This study compares whether unprotected weight bearing as tolerated is superior to protected weight bearing and unprotected non-weight bearing in terms of

  4. Changes in skeletal muscle gene expression consequent to altered weight bearing

    Science.gov (United States)

    Booth, F. W.; Kirby, C. R.

    1992-01-01

    Skeletal muscle is a dynamic organ that adapts to alterations in weight bearing. This brief review examines changes in muscle gene expression resulting from the removal of weight bearing by hindlimb suspension and from increased weight bearing due to eccentric exercise. Acute (less than or equal to 2 days) non-weight bearing of adult rat soleus muscle alters only the translational control of muscle gene expression, while chronic (greater than or equal to 7 days) removal of weight bearing appears to influence pretranslational, translational, and posttranslational mechanisms of control. Acute and chronic eccentric exercise are associated with alterations of translational and posttranslational control, while chronic eccentric training also alters the pretranslational control of muscle gene expression. Thus alterations in weight bearing influence multiple sites of gene regulation.

  5. Weight bearing or non-weight bearing after surgically fixed ankle fractures, the WOW! Study: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Briet, Jan Paul; Houwert, Roderick M; Smeeing, Diederik P J; Pawiroredjo, Janity S; Kelder, Johannes C; Lansink, Koen W; Leenen, Luke P H; van der Zwaal, Peer; van Zutphen, Stephan W A M; Hoogendoorn, Jochem M; van Heijl, Mark; Verleisdonk, Egbert J M M; van Lammeren, Guus W; Segers, Michiel J; Hietbrink, Falco

    2015-04-18

    The optimal post-operative care regimen after surgically fixed Lauge Hansen supination exorotation injuries remains to be established. This study compares whether unprotected weight bearing as tolerated is superior to protected weight bearing and unprotected non-weight bearing in terms of functional outcome and safety. The WOW! Study is a prospective multicenter clinical trial. Patients between 18 and 65 years of age with a Lauge Hansen supination exorotation type 2, 3 or 4 ankle fractures requiring surgical treatment are eligible for inclusion. An expert panel validates the classification and inclusion eligibility. After surgery, patients are randomized to either the 1) unprotected non-weight-bearing, 2) protected weight-bearing, or 3) unprotected weight-bearing group. The primary outcome measure is ankle-specific disability measured by the Olerud-Molander ankle score. Secondary outcomes are 1) quality of life (e.g., return to work and resumption of sport), 2) complications, 3) range of motion, 4) calf wasting, and 5) maximum pressure load after 3 months and 1 year. This trial is designed to compare the effectiveness and safety of unprotected weight bearing with two commonly used post-operative treatment regimens after internal fixation of specified, intrinsically stable but displaced ankle fractures. An expert panel has been established to evaluate every potential subject, which ensures that every patient is strictly screened according to the inclusion and exclusion criteria and that there is a clear indication for surgical fixation. The WOW! Study is registered in the Dutch Trial Register ( NTR3727 ). Date of registration: 28-11-2012.

  6. Neuromuscular fatigue and tibiofemoral joint biomechanics when transitioning from non-weight bearing to weight bearing.

    Science.gov (United States)

    Schmitz, Randy J; Kim, Hyunsoo; Shultz, Sandra J

    2015-01-01

    Fatigue is suggested to be a risk factor for anterior cruciate ligament injury. Fatiguing exercise can affect neuromuscular control and laxity of the knee joint, which may render the knee less able to resist externally applied loads. Few authors have examined the effects of fatiguing exercise on knee biomechanics during the in vivo transition of the knee from non-weight bearing to weight bearing, the time when anterior cruciate ligament injury likely occurs. To investigate the effect of fatiguing exercise on tibiofemoral joint biomechanics during the transition from non-weight bearing to early weight bearing. Cross-sectional study. Research laboratory. Ten participants (5 men and 5 women; age = 25.3 ± 4.0 years) with no previous history of knee-ligament injury to the dominant leg. Participants were tested before (preexercise) and after (postexercise) a protocol consisting of repeated leg presses (15 repetitions from 10°-40° of knee flexion, 10 seconds' rest) against a 60% body-weight load until they were unable to complete a full bout of repetitions. Electromagnetic sensors measured anterior tibial translation and knee-flexion excursion during the application of a 40% body-weight axial compressive load to the bottom of the foot, simulating weight acceptance. A force transducer recorded axial compressive force. The axial compressive force (351.8 ± 44.3 N versus 374.0 ± 47.9 N; P = .018), knee-flexion excursion (8.0° ± 4.0° versus 10.2° ± 3.7°; P = .046), and anterior tibial translation (6.7 ± 1.7 mm versus 8.2 ± 1.9 mm; P Neuromuscular fatigue may impair initial knee-joint stabilization during weight acceptance, leading to greater accessory motion at the knee and the potential for greater anterior cruciate ligament loading.

  7. Functional weight-bearing mobilization after Achilles tendon rupture enhances early healing response: a single-blinded randomized controlled trial.

    Science.gov (United States)

    Valkering, Kars P; Aufwerber, Susanna; Ranuccio, Francesco; Lunini, Enricomaria; Edman, Gunnar; Ackermann, Paul W

    2017-06-01

    Functional weight-bearing mobilization may improve repair of Achilles tendon rupture (ATR), but the underlying mechanisms and outcome were unknown. We hypothesized that functional weight-bearing mobilization by means of increased metabolism could improve both early and long-term healing. In this prospective randomized controlled trial, patients with acute ATR were randomized to either direct post-operative functional weight-bearing mobilization (n = 27) in an orthosis or to non-weight-bearing (n = 29) plaster cast immobilization. During the first two post-operative weeks, 15°-30° of plantar flexion was allowed and encouraged in the functional weight-bearing mobilization group. At 2 weeks, patients in the non-weight-bearing cast immobilization group received a stiff orthosis, while the functional weight-bearing mobilization group continued with increased range of motion. At 6 weeks, all patients discontinued immobilization. At 2 weeks, healing metabolites and markers of procollagen type I (PINP) and III (PIIINP) were examined using microdialysis. At 6 and 12 months, functional outcome using heel-rise test was assessed. Healing tendons of both groups exhibited increased levels of metabolites glutamate, lactate, pyruvate, and of PIIINP (all p bearing mobilization group demonstrated significantly higher concentrations of glutamate compared to the non-weight-bearing cast immobilization group (p = 0.045).The upregulated glutamate levels were significantly correlated with the concentrations of PINP (r = 0.5, p = 0.002) as well as with improved functional outcome at 6 months (r = 0.4; p = 0.014). Heel-rise tests at 6 and 12 months did not display any differences between the two groups. Functional weight-bearing mobilization enhanced the early healing response of ATR. In addition, early ankle range of motion was improved without the risk of Achilles tendon elongation and without altering long-term functional outcome. The relationship between

  8. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  9. Similar failure rate in immediate post-operative weight bearing versus protected weight bearing following meniscal repair on peripheral, vertical meniscal tears.

    Science.gov (United States)

    Perkins, Bryan; Gronbeck, Kyle R; Yue, Ruixian Alexander; Tompkins, Marc A

    2017-08-16

    Post-operative weight bearing after meniscal repair is a point of debate among physicians. This study sought to evaluate whether patients adhering to an immediate WBAT rehabilitation programme have a higher failure rate compared to those adhering to a more traditional, protected, NWB status following meniscal repair. The null hypothesis was that there would be no difference in failure between the two groups. A retrospective review of meniscal repair patients greater than 5 years from surgery was performed for patients receiving meniscal repair treatment. Patients were categorized by post-surgical weight-bearing status, either NWB or WBAT, and then analysed for failure of repair. Failure was defined as re-operation on the torn meniscus. The study controlled for variables including age at surgery, sex, height, weight, and BMI, classification of tear type, acuity of the tear, repair location (medial or lateral), repair location within the meniscus, repair technique, and concomitant procedures. Re-operations were performed in 61 of 157 patients [38.9%]. There was no difference between weight-bearing groups for failure of meniscus repair (n.s.). The tears were acute vertical tears located in the posterior horn and body. For the 61 patients with re-operation, the average time to re-operation was 2.2 years with 10 [16%] > 5 years from surgery, 17 [28%] 2-5 years from surgery, and 34 [56%] bearing groups for rate of re-operation (n.s.). Weight bearing as tolerated after meniscal repair for peripheral, vertical tears does not result in a higher failure rate than traditional, non-weight bearing over a five-year follow-up period. The clinical relevance is that, based on these data, it may be appropriate to allow weight bearing as tolerated following meniscal repair of peripheral, vertical tears. Retrospective cohort study, Level III.

  10. Non-Weight-Bearing and Weight-Bearing Ultrasonography of Select Foot Muscles in Young, Asymptomatic Participants: A Descriptive and Reliability Study.

    Science.gov (United States)

    Battaglia, Patrick J; Mattox, Ross; Winchester, Brett; Kettner, Norman W

    The primary aim of this study was to determine the reliability of diagnostic ultrasound imaging for select intrinsic foot muscles using both non-weight-bearing and weight-bearing postures. Our secondary aim was to describe the change in muscle cross-sectional area (CSA) and dorsoplantar thickness when bearing weight. An ultrasound examination was performed with a linear ultrasound transducer operating between 9 and 12 MHz. Long-axis and short-axis ultrasound images of the abductor hallucis, flexor digitorum brevis, and quadratus plantae were obtained in both the non-weight-bearing and weight-bearing postures. Two examiners independently collected ultrasound images to allow for interexaminer and intraexaminer reliability calculation. The change in muscle CSA and dorsoplantar thickness when bearing weight was also studied. There were 26 participants (17 female) with a mean age of 25.5 ± 3.8 years and a mean body mass index of 28.0 ± 7.8 kg/m 2 . Inter-examiner reliability was excellent when measuring the muscles in short axis (intraclass correlation coefficient >0.75) and fair to good in long axis (intraclass correlation coefficient >0.4). Intraexaminer reliability was excellent for the abductor hallucis and flexor digitorum brevis and ranged from fair to good to excellent for the quadratus plantae. Bearing weight did not reduce interexaminer or intraexaminer reliability. All muscles exhibited a significant increase in CSA when bearing weight. This is the first report to describe weight-bearing diagnostic ultrasound of the intrinsic foot muscles. Ultrasound imaging is reliable when imaging these muscles bearing weight. Furthermore, muscle CSA increases in the weight-bearing posture. Copyright © 2016. Published by Elsevier Inc.

  11. Measurement of lower limb alignment: there are within-person differences between weight-bearing and non-weight-bearing measurement modalities.

    Science.gov (United States)

    Schoenmakers, Daphne A L; Feczko, Peter Z; Boonen, Bert; Schotanus, Martijn G M; Kort, Nanne P; Emans, Pieter J

    2017-11-01

    Previous studies have compared weight-bearing mechanical leg axis (MLA) measurements to non-weight-bearing measurement modalities. Most of these studies compared mean or median values and did not analyse within-person differences between measurements. This study evaluates the within-person agreement of MLA measurements between weight-bearing full-length radiographs (FLR) and non-weight-bearing measurement modalities (computer-assisted surgery (CAS) navigation or MRI). Two independent observers measured the MLA on pre- and postoperative weight-bearing FLR in 168 patients. These measurements were compared to non-weight-bearing measurements obtained by CAS navigation or MRI. Absolute differences in individual subjects were calculated to determine the agreement between measurement modalities. Linear regression was used to evaluate the possibility that other independent variables impact the differences in measurements. A difference was found in preoperative measurements between FLR and CAS navigation (mean of 2.5° with limit of agreement (1.96 SD) of 6.4°), as well as between FLR and MRI measurements (mean of 2.4° with limit of agreement (1.96 SD) of 6.9°). Postoperatively, the mean difference between MLA measured on FLR compared to CAS navigation was 1.5° (limit of agreement (1.96 SD) of 4.6°). Linear regression analysis showed that weight-bearing MLA measurements vary significantly from non-weight-bearing MLA measurements. Differences were more severe in patients with mediolateral instability (p = 0.010), age (p = 0.049) and ≥3° varus or valgus alignment (p = 0.008). The clinical importance of this study lies in the finding that there are within-person differences between weight-bearing and non-weight-bearing measurement modalities. This has implications for preoperative planning, performing total knee arthroplasty (TKA), and clinical follow-up after TKA surgery using CAS navigation or patient-specific instrumentation. III.

  12. Eccentric exercise training as a countermeasure to non-weight-bearing soleus muscle atrophy

    Science.gov (United States)

    Kirby, Christopher R.; Ryan, Mirelle J.; Booth, Frank W.

    1992-01-01

    This investigation tested whether eccentric resistance training could prevent soleus muscle atrophy during non-weight bearing. Adult female rats were randomly assigned to either weight bearing +/- intramuscular electrodes or non-weight bearing +/- intramuscular electrodes groups. Electrically stimulated maximal eccentric contractions were performed on anesthetized animals at 48-h intervals during the 10-day experiment. Non-weight bearing significantly reduced soleus muscle wet weight (28-31 percent) and noncollagenous protein content (30-31 percent) compared with controls. Eccentric exercise training during non-weight bearing attenuated but did not prevent the loss of soleus muscle wet weight and noncollagenous protein by 77 and 44 percent, respectively. The potential of eccentric exercise training as an effective and highly efficient counter-measure to non-weight-bearing atrophy is demonstrated in the 44 percent attenuation of soleus muscle noncollagenous protein loss by eccentric exercise during only 0.035 percent of the total non-weight-bearing time period.

  13. Is it correct to always consider weight-bearing asymmetrically distributed in individuals with hemiparesis?

    Science.gov (United States)

    Martins, Emerson Fachin; de Araujo Barbosa, Paulo Henrique Ferreira; de Menezes, Lidiane Teles; de Sousa, Pedro Henrique Côrtes; Costa, Abraão Souza

    2011-11-01

    Injuries may cause unilateral deterioration of brain areas related to postural control resulting in lateralized motor disability with abnormal asymmetry in weight-bearing distribution. Although overloading toward the nonaffected limb has been described as the preferred posture among individuals with hemiparesis, characterization of the weight-bearing asymmetry is poorly and indirectly described. Therefore, this study aimed to describe weight-bearing distribution during upright stance, establishing criteria to consider asymmetry in hemiparesis when analyzed within the limits defined by controls matched by age and gender. Forty subjects with (n = 20) or without hemiparesis (n = 20) were included in procedures to record weight-bearing values between hemibodies, and these values were used to calculate a symmetry ratio. Control presented 95% confidence interval (CI) of the mean for symmetry ratio ranging from 0.888 to 1.072, defining limits to symmetry. Four subjects with hemiparesis (20%) had symmetry ratios inside limits defined by controls (i.e., weight-bearing symmetrically distributed), and 11 (55%) subjects without hemiparesis showed symmetry ratios outside the limits, suggesting asymmetrical weight-bearing distribution. It was concluded that asymmetry, when present in a control group, was more frequently overloading nonpredominantly used hemibody (nondominant side), differing from a hemiparesis group commonly forced to assume the nonaffected side as the predominantly used hemibody and where the overload was observed.

  14. The effect of weight-bearing exercise and non-weight-bearing exercise on gait in rats with sciatic nerve crush injury.

    Science.gov (United States)

    Kim, Ki-Hyun; Hwangbo, Gak; Kim, Seong-Gil

    2015-04-01

    [Purpose] The purpose of this study was to access the effect of weight bearing exercise (treadmill exercise) and non-weight-bearing exercise (swimming exercise) on gait in the recovery process after a sciatic nerve crush injury. [Subjects and Methods] Rats were randomly divided into a swimming group (n=3) with non-weight-bearing exercise after a sciatic nerve crush and a treadmill group (n=3) with weight bearing exercise after a sciatic nerve crush. Dartfish is a program that can analyze and interpret motion through video images. The knee lateral epicondyle, lateral malleolus, and metatarsophalangeal joint of the fifth toe were marked by black dots before recording. [Results] There were significant differences in TOK (knee angle toe off) and ICK (knee angle at initial contact) in the swimming group and in TOK, ICA (ankle angle at initial contact), and ICK in the treadmill group. In comparison between groups, there were significant differences in TOA (ankle angle in toe off) and ICA at the 7th day. [Conclusion] There was no difference between weight bearing and non-weight-bearing exercise in sciatic nerve damage, and both exercises accelerated the recovery process in this study.

  15. [Correlative analysis on metatarsalgia and the X-ray measurement indexes under weight-bearing and non-weight-bearing of hallux valgus].

    Science.gov (United States)

    Gong, Hao; Sang, Zhi-Cheng; Wen, Jian-Min; Sun, Wei-Dong; Hu, Hai-Wei; Zhang, Yong-Chao; Zuo, Jian-Gang; Wang, Hai-Xiong

    2014-04-01

    To study changes in the radiographic appearance during weight-bearing and non-weigh-bearing in hallux valgus, and to analyse the correlation between the elasticity of plantar soft tissue of hallux valgus and the pain under the metatarsal head. From May 2012 to October 2012, 240 feet of 120 patients with hallux valgus were enrolled in the study. The degrees of the pian under the metatarsal head of all the patients were observed. AP and lateral X-ray films of feet were taken on the condition of weight-bearing and non-weight-bearing. So the hallux valgus angle (HVA), the inter-metatarsal angle between the first and second metatarsals (IM1-2), the inter-metatarsal angle between the first and fifth metatarsals (IM1-5), top angle of the medial longitudinal arch (TAOTMLA),and anterior angle of the medial longitudinal arch (AAOTMLA) were measured on the X-ray films. The differences of HVA, IM1-2, IM1-5, TAOTMLA and AAOTMLA between two groups were compared, and the correlation between the changes of IM1-2, IM 1-5, TAOTMLA, AAOTMLA and the degree of the pain under the metatarsal head were analysed. One hundred and forty-eight feet had the pain under the metatarsal head. The IM1-2, IM1-5 and TAOTMLA increased on weight-bearing position compared with those on non-weight-bearing position, but the HVA and AAOTMLA decreased on weight-bearing position compared with those on non-weight-bearing position. There was a moderate relationship between the changes of IM 1-2,IM1-5 and the degree of the hallux valgus deformity, as well as the relationship between the different of IM1-5 and the degree of the pian under the metatarsal head. The degree of the collapse of the arch of foot with hallux valgus becomes serious with its deformity increasing. The pain under the metatarsal head of hallux valgus increases with the increased changes of IM 1-2,IM 1-5 and TAOTMLA. Analysis of the X-ray observation indexes of hallux valgus on weight-bearing position and non-weight-bearing position has

  16. Combination of Weight-Bearing Training and Anti-MSTN Polyclonal Antibody Improve Bone Quality In Rats.

    Science.gov (United States)

    Tang, Liang; Gao, Xiaohang; Yang, Xiaoying; Zhang, Didi; Zhang, Xiaojun; Du, Haiping; Han, Yanqi; Sun, Lijun

    2016-12-01

    Weight-bearing exercise is beneficial to bone health. Myostatin (MSTN) deficiency has a positive effect on bone formation. We wondered if a combination of weight-bearing training and polyclonal antibody for MSTN (MsAb) would augment bone formation to a greater degree than single treatment. In this study, rats were randomly assigned to four groups: Control, weight-bearing training (WT), MsAb, and WT+MsAb. The trained rats ran at 15 m/min bearing with 35% of their body weight, 40 min/day (2 min of running followed by 2 min of rest), 6 days/week, for 8 weeks. The rats with MsAb were injected once a week with MsAb for 8 weeks. MicroCT analysis showed that compared with the MsAb group, WT+MsAb significantly enhanced cortical bone mineral density (BMD) (p .05), weight-bearing training significantly increased energy absorption (p weight-bearing training and MsAb have a greater positive effect on bone than treatment with either MsAb or weight-bearing training alone, suggesting that resistance training in combination with MSTN antagonists could be an effective approach for improving bone health and reducing osteoporosis risk.

  17. Is prescribed lower extremity weight-bearing status after geriatric lower extremity trauma associated with increased mortality?

    Science.gov (United States)

    Gitajn, Ida Leah; Connelly, Daniel; Mascarenhas, Daniel; Breazeale, Stephen; Berger, Peter; Schoonover, Carrie; Martin, Brook; O'Toole, Robert V; Pensy, Raymond; Sciadini, Marcus

    2018-02-01

    Evaluate whether mortality after discharge is elevated in geriatric fracture patients whose lower extremity weight-bearing is restricted. Retrospective cohort study SETTING: Urban Level 1 trauma center PATIENTS/PARTICIPANTS: 1746 patients >65 years of age INTERVENTION: Post-operative lower extremity weight-bearing status MAIN OUTCOME MEASURE: Mortality, as determined by the Social Security Death Index RESULTS: Univariate analysis demonstrated that patients who were weight-bearing as tolerated on bilateral lower extremities (BLE) had significantly higher 5-year mortality compared to patients with restricted weight-bearing on one lower extremity and restricted weight-bearing on BLE (30%, 21% and 22% respectively, p bearing as tolerated on BLE, restricted weight-bearing on one lower extremity had a hazard ratio (HR) of 0.97 (95% confidence interval 0.78 to 1.20, p = 0.76) and restricted weight-bearing in BLE had a HR of 0.91 (95% confidence interval 0.60 to 1.36, p = 0.73). In geriatric patients, prescribed weight-bearing status did not have a statistically significant association with mortality after discharge, when controlling for age, sex, body mass index, medical comorbidities, Injury Severity Scale (ISS), mechanism of injury, nonoperative treatment and admission GCS. This remained true in when the analysis was restricted to operative injuries only. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Baropodometric technology used to analyze types of weight-bearing during hemiparetic upright position

    Directory of Open Access Journals (Sweden)

    Lidiane Teles de Menezes

    Full Text Available INTRODUCTION: Although baropodometric analysis has been published since the 1990s, only now it is found a considerable number of studies showing different uses in the rehabilitation. OBJECTIVE: To amplify the use of this technology, this research aimed to analyze baropodometric records during upright position of subjects with hemiparesis, describing a way to define weight-bearing profiles in this population. METHOD: 20 healthy subjects were matched by gender and age with 12 subjects with chronic spastic hemiparesis. This control group was formed to establish the limits of symmetry during weight-bearing distribution in the hemiparesis group. Next, hemiparesis group was submitted to procedures to measure baropodometric records used to provide variables related to the weight-bearing distribution, the arch index and the displacements in the center of pressure (CoP. Data were used to compare differences among kinds of weight-bearing distribution (symmetric, asymmetric toward non-paretic or paretic foot and coordination system for CoP displacements. RESULTS: Hemiparesis group was compounded by eight symmetrics, eight asymmetrics toward non-paretic foot and four asymmetric toward paretic foot. Significant differences in the weight-bearing distributions between non-predominantly and predominantly used foot did not promote differences in the other baropodometric records (peak and mean of pressure, and support area. Mainly in the asymmetry toward non-paretic foot it was observed significant modifications of the baropodometric records. CONCLUSION: Baropodometric technology can be used to analyze weight-bearing distribution during upright position of subjects with hemiparesis, detecting different kinds of weight-bearing profiles useful to therapeutic programs and researches involving subjects with this disability.

  19. High Variability of Observed Weight Bearing During Standing Foot and Ankle Radiographs.

    Science.gov (United States)

    Miller, Christopher P; Ghorbanhoseini, Mohammad; Ehrlichman, Lauren K; Walley, Kempland C; Ghaheri, Azadeh; Kwon, John Y

    2017-06-01

    Weight-bearing radiographs are a critical component of evaluating foot and ankle pathology. An underlying assumption is that patients are placing 50% of their body weight on the affected foot during image acquisition. The accuracy of weight bearing during radiographs is unknown and, presumably, variable, which may result in uncertain ability of the resultant radiographs to appropriately portray the pathology of interest. Fifty subjects were tested. The percentage body weight through the foot of interest was measured at the moment of radiographic image acquisition. The subject was then instructed to bear "half [their] weight" prior to the next radiograph. The percentage body weight was calculated and compared to ideal 50% weight bearing. The mean percentage body weight in trial 1 and 2 was 45.7% ± 3.2% ( P = .012 compared to the 50% mark) and 49.2% ± 2.4%, respectively ( P = .428 compared to 50%). The mean absolute difference in percentage weight bearing compared to 50% in trials 1 and 2 was 9.3% ± 2.3% and 5.8% ± 1.8%, respectively ( P = .005). For trial 1, 18/50 subjects were within the "ideal" (45%-55%) range for weight bearing compared to 32/50 on trial 2 ( P = .005). In trial 1, 24/50 subjects had "appropriate" (>45%) weight bearing compared to 39/50 on trial 2 ( P = .002). There was substantial variability in the weight applied during radiograph acquisition. This study raises questions regarding the assumptions, reliability, and interpretation when evaluating weight-bearing radiographs. Level III, comparative study.

  20. Inaccuracy of a physical strain trainer for the monitoring of partial weight bearing.

    Science.gov (United States)

    Pauser, Johannes; Jendrissek, Andreas; Swoboda, Bernd; Gelse, Kolja; Carl, Hans-Dieter

    2011-11-01

    To investigate the use of a physical strain trainer for the monitoring of partial weight bearing. Case series with healthy volunteers. Orthopedic clinic. Healthy volunteers (N=10) with no history of foot complaints. Volunteers were taught to limit weight bearing to 10% body weight (BW) and 50% BW, monitored by a physical strain trainer. The parameters peak pressure, maximum force, force-time integral, and pressure-time integral were assessed by dynamic pedobarography when volunteers walked with full BW (condition 1), 50% BW (condition 2), and 10% BW (condition 3). With 10% BW (condition 3), forces with normative gait (condition 1) were statistically significantly reduced under the hindfoot where the physical strain trainer is placed. All pedobarographic parameters were, however, exceeded when the total foot was measured. A limitation to 10% BW with the physical strain trainer (condition 3) was equal to a bisection of peak pressure and maximum force for the total foot with normative gait (condition 1). Halved BW (condition 2) left a remaining mean 82% of peak pressure and mean 59% of maximum force from full BW (condition 1). The concept of controlling partial weight bearing with the hindfoot-addressing device does not represent complete foot loading. Such devices may be preferably applied in cases when the hindfoot in particular must be off-loaded. Other training devices (eg, biofeedback soles) that monitor forces of the total foot have to be used to control partial weight bearing of the lower limb accurately. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  1. Early Versus Late Weight-Bearing Protocols for Surgically Managed Posterior Wall Acetabular Fractures.

    Science.gov (United States)

    Heare, Austin; Kramer, Nicholas; Salib, Christopher; Mauffrey, Cyril

    2017-07-01

    Despite overall improved outcomes with open reduction and internal fixation of acetabular fractures, posterior wall fractures show disproportionately poor results. The effect of weight bearing on outcomes of fracture management has been investigated in many lower extremity fractures, but evidence-based recommendations in posterior wall acetabular fractures are lacking. The authors systematically reviewed the current literature to determine if a difference in outcome exists between early and late postoperative weight-bearing protocols for surgically managed posterior wall acetabular fractures. PubMed and MEDLINE were searched for posterior wall acetabular fracture studies that included weight-bearing protocols and Merle d'Aubigné functional scores. Twelve studies were identified. Each study was classified as either early or late weight bearing. Early weight bearing was defined as full, unrestricted weight bearing at or before 12 weeks postoperatively. Late weight bearing was defined as restricted weight bearing for greater than 12 weeks postoperatively. The 2 categories were then compared by functional score using a 2-tailed t test and by complication rate using chi-square analysis. Six studies (152 fractures) were placed in the early weight-bearing category. Six studies (302 fractures) were placed in the late weight-bearing category. No significant difference in Merle d'Aubigné functional scores was found between the 2 groups. No difference was found regarding heterotopic ossification, avascular necrosis, superficial infections, total infections, or osteoarthritis. This systematic review found no difference in functional outcome scores or complication rates between early and late weight-bearing protocols for surgically treated posterior wall fractures. [Orthopedics. 2017: 40(4):e652-e657.]. Copyright 2017, SLACK Incorporated.

  2. Haptic biofeedback for improving compliance with lower-extremity partial weight bearing.

    Science.gov (United States)

    Fu, Michael C; DeLuke, Levi; Buerba, Rafael A; Fan, Richard E; Zheng, Ying Jean; Leslie, Michael P; Baumgaertner, Michael R; Grauer, Jonathan N

    2014-11-01

    After lower-extremity orthopedic trauma and surgery, patients are often advised to restrict weight bearing on the affected limb. Conventional training methods are not effective at enabling patients to comply with recommendations for partial weight bearing. The current study assessed a novel method of using real-time haptic (vibratory/vibrotactile) biofeedback to improve compliance with instructions for partial weight bearing. Thirty healthy, asymptomatic participants were randomized into 1 of 3 groups: verbal instruction, bathroom scale training, and haptic biofeedback. Participants were instructed to restrict lower-extremity weight bearing in a walking boot with crutches to 25 lb, with an acceptable range of 15 to 35 lb. A custom weight bearing sensor and biofeedback system was attached to all participants, but only those in the haptic biofeedback group were given a vibrotactile signal if they exceeded the acceptable range. Weight bearing in all groups was measured with a separate validated commercial system. The verbal instruction group bore an average of 60.3±30.5 lb (mean±standard deviation). The bathroom scale group averaged 43.8±17.2 lb, whereas the haptic biofeedback group averaged 22.4±9.1 lb (Phaptic biofeedback group averaged 14.5±6.3% (Phaptic biofeedback to improve compliance with lower-extremity partial weight bearing, haptic biofeedback was superior to conventional physical therapy methods. Further studies in patients with clinical orthopedic trauma are warranted. Copyright 2014, SLACK Incorporated.

  3. DC Control Effort Minimized for Magnetic-Bearing-Supported Shaft

    Science.gov (United States)

    Brown, Gerald V.

    2001-01-01

    A magnetic-bearing-supported shaft may have a number of concentricity and alignment problems. One of these involves the relationship of the position sensors, the centerline of the backup bearings, and the magnetic center of the magnetic bearings. For magnetic bearings with permanent magnet biasing, the average control current for a given control axis that is not bearing the shaft weight will be minimized if the shaft is centered, on average over a revolution, at the magnetic center of the bearings. That position may not yield zero sensor output or center the shaft in the backup bearing clearance. The desired shaft position that gives zero average current can be achieved if a simple additional term is added to the control law. Suppose that the instantaneous control currents from each bearing are available from measurements and can be input into the control computer. If each control current is integrated with a very small rate of accumulation and the result is added to the control output, the shaft will gradually move to a position where the control current averages to zero over many revolutions. This will occur regardless of any offsets of the position sensor inputs. At that position, the average control effort is minimized in comparison to other possible locations of the shaft. Nonlinearities of the magnetic bearing are minimized at that location as well.

  4. Correlation of psychomotor findings and the ability to partially weight bear

    Science.gov (United States)

    2012-01-01

    Background Partial weight bearing is thought to avoid excessive loading that may interfere with the healing process after surgery of the pelvis or the lower extremity. The object of this study was to investigate the relationship between the ability to partially weight bear and the patient's psychomotor skills and an additional evaluation of the possibility to predict this ability with a standardized psychomotor test. Methods 50 patients with a prescribed partial weight bearing at a target load of 15 kg following surgery were verbally instructed by a physical therapist. After the instruction and sufficient training with the physical therapist vertical ground reaction forces using matrix insoles were measured while walking with forearm crutches. Additionally, psychomotor skills were tested with the Motorische Leistungsserie (MLS). To test for correlations Spearman's Rank correlation was used. For further comparison of the two groups a Mann-Withney test was performed using Bonferroni correction. Results The patient's age and body weight significantly correlated with the ability to partially weight bear at a 15 kg target load. There were significant correlations between several subtests of the MLS and ground reaction forces measured while walking with crutches. Patients that were able to correctly perform partial weight bearing showed significant better psychomotor skills especially for those subtests where both hands had to be coordinated simultaneously. Conclusions The ability to partially weight bear is associated with psychomotor skills. The MLS seems to be a tool that helps predicting the ability to keep within the prescribed load limits. PMID:22330655

  5. Correlation of psychomotor findings and the ability to partially weight bear

    Directory of Open Access Journals (Sweden)

    Ruckstuhl Thomas

    2012-02-01

    Full Text Available Abstract Background Partial weight bearing is thought to avoid excessive loading that may interfere with the healing process after surgery of the pelvis or the lower extremity. The object of this study was to investigate the relationship between the ability to partially weight bear and the patient's psychomotor skills and an additional evaluation of the possibility to predict this ability with a standardized psychomotor test. Methods 50 patients with a prescribed partial weight bearing at a target load of 15 kg following surgery were verbally instructed by a physical therapist. After the instruction and sufficient training with the physical therapist vertical ground reaction forces using matrix insoles were measured while walking with forearm crutches. Additionally, psychomotor skills were tested with the Motorische Leistungsserie (MLS. To test for correlations Spearman's Rank correlation was used. For further comparison of the two groups a Mann-Withney test was performed using Bonferroni correction. Results The patient's age and body weight significantly correlated with the ability to partially weight bear at a 15 kg target load. There were significant correlations between several subtests of the MLS and ground reaction forces measured while walking with crutches. Patients that were able to correctly perform partial weight bearing showed significant better psychomotor skills especially for those subtests where both hands had to be coordinated simultaneously. Conclusions The ability to partially weight bear is associated with psychomotor skills. The MLS seems to be a tool that helps predicting the ability to keep within the prescribed load limits.

  6. Weights and hematology of wild black bears during hibernation

    Science.gov (United States)

    DelGiudice, Glenn D.; Rogers, Lynn L.; Allen, Arthur W.; Seal, U.S.

    1991-01-01

    We compared weights and hematological profiles of adult (greater than 3-yr-old) female black bears (Ursus americanus) during hibernation (after 8 January). We handled 28 bears one to four times (total of 47) over 4 yr of varying mast and berry production. Mean weight of lactating bears was greater (P less than 0.0001) than that of non-lactating females. White blood cells (P less than 0.05) and mean corpuscular volume (P = 0.005) also differed between lactating and non-lactating bears. Hemoglobin (P = 0.006) and mean corpuscular hemoglobin concentration (P = 0.02) varied among years; values were lowest during 1975, following decreased precipitation and the occurrence of a second year of mast and berry crop shortages in a three-year period. Significant (P less than 0.05) interaction between reproductive status (lactating versus non-lactating) and study year for hemoglobin, red blood cells, and packed cell volume, and increased mean corpuscular volume, suggested a greater nutritional challenge for lactating females compared to non-lactating females during the 1975 denning season. Our data suggest that hematological characteristics of denning bears may be more sensitive than weights as indicators of annual changes in nutritional status; however, other influential factors, in addition to mast and berry crop production, remain to be examined.

  7. Hip arthroscopy protocol: expert opinions on post-operative weight bearing and return to sports guidelines.

    Science.gov (United States)

    Rath, Ehud; Sharfman, Zachary T; Paret, Matan; Amar, Eyal; Drexler, Michael; Bonin, Nicolas

    2017-01-01

    The objectives of this study are to survey the weight-bearing limitation practices and delay for returning to running and impact sports of high volume hip arthroscopy orthopedic surgeons. The study was designed in the form of expert survey questionnaire. Evidence-based data are scares regarding hip arthroscopy post-operative weight-bearing protocols. An international cross-sectional anonymous Internet survey of 26 high-volume hip arthroscopy specialized surgeons was conducted to report their weight-bearing limitations and rehabilitation protocols after various arthroscopic hip procedures. The International Society of Hip Arthroscopy invited this study. The results were examined in the context of supporting literature to inform the studies suggestions. Four surgeons always allow immediate weight bearing and five never offer immediate weight bearing. Seventeen surgeons provide weight bearing depending on the procedures performed: 17 surgeons allowed immediate weight bearing after labral resection, 10 after labral repair and 8 after labral reconstruction. Sixteen surgeons allow immediate weight bearing after psoas tenotomy. Twenty-one respondents restrict weight bearing after microfracture procedures for 3-8 weeks post-operatively. Return to running and impact sports were shorter for labral procedures and bony procedures and longer for cartilaginous and capsular procedures. Marked variability exists in the post-operative weight-bearing practices of hip arthroscopy surgeons. This study suggests that most surgeons allow immediate weight bearing as tolerated after labral resection, acetabular osteoplasty, chondroplasty and psoas tenotomy. For cartilage defect procedures, 6 weeks or more non-weight bearing is suggested depending on the area of the defect and lateral central edge angle. Delayed return to sports activities is suggested after microfracture procedures. The level of evidence was Level V expert opinions.

  8. Real-time visual biofeedback during weight bearing improves therapy compliance in patients following lower extremity fractures.

    Science.gov (United States)

    Raaben, Marco; Holtslag, Herman R; Leenen, Luke P H; Augustine, Robin; Blokhuis, Taco J

    2018-01-01

    Individuals with lower extremity fractures are often instructed on how much weight to bear on the affected extremity. Previous studies have shown limited therapy compliance in weight bearing during rehabilitation. In this study we investigated the effect of real-time visual biofeedback on weight bearing in individuals with lower extremity fractures in two conditions: full weight bearing and touch-down weight bearing. 11 participants with full weight bearing and 12 participants with touch-down weight bearing after lower extremity fractures have been measured with an ambulatory biofeedback system. The participants first walked 15m and the biofeedback system was only used to register the weight bearing. The same protocol was then repeated with real-time visual feedback during weight bearing. The participants could thereby adapt their loading to the desired level and improve therapy compliance. In participants with full weight bearing, real-time visual biofeedback resulted in a significant increase in loading from 50.9±7.51% bodyweight (BW) without feedback to 63.2±6.74%BW with feedback (P=0.0016). In participants with touch-down weight bearing, the exerted lower extremity load decreased from 16.7±9.77kg without feedback to 10.27±4.56kg with feedback (P=0.0718). More important, the variance between individual steps significantly decreased after feedback (P=0.018). Ambulatory monitoring weight bearing after lower extremity fractures showed that therapy compliance is low, both in full and touch-down weight bearing. Real-time visual biofeedback resulted in significantly higher peak loads in full weight bearing and increased accuracy of individual steps in touch-down weight bearing. Real-time visual biofeedback therefore results in improved therapy compliance after lower extremity fractures. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Activation of the hip adductor muscles varies during a simulated weight-bearing task.

    Science.gov (United States)

    Hides, Julie A; Beall, Paula; Franettovich Smith, Melinda M; Stanton, Warren; Miokovic, Tanja; Richardson, Carolyn

    2016-01-01

    To investigate the pattern of muscle activation of the individual hip adductor muscles using a standardised simulated unilateral weight-bearing task. A repeated measures design. Laboratory. 20 healthy individuals (11 females, 9 males) participated in the study. Age ranged from 20 to 25 years. Surface electromyography recordings from adductor magnus and adductor longus muscles were taken at levels representing 10-50% of body weight during a simulated weight-bearing task. Electromyography (EMG) data were normalised to maximal voluntary isometric contraction. The adductor magnus was recruited at significantly higher levels than the adductor longus muscle during a simulated weight-bearing task performed across 10-50% of body weight (p bearing task. This information should be considered when selecting exercises for management and prevention of groin strains. Closed chain exercises with weight-bearing through the lower limb are more likely to recruit the adductor magnus muscle over the adductor longus muscle. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. The effects of a 12-week program of static upper extremity weight bearing exercises on weight bearing in children with hemiplegic type of cerebral palsy

    Directory of Open Access Journals (Sweden)

    P. Jayaraman

    2010-01-01

    Full Text Available The  major  objective  of  this  study  was  to  quantify  the  effects  of a  12-week  program  of  weight  bearing  exercises  on  weight  borne  through  the hand and grip pressures in children with hemiplegic cerebral palsy. This study also sought to monitor the change in spasticity immediately following weight-bearing  exercises.  A  quasi-experimental,  one  group  pre-test,  post-test  study  was used. Eleven children with hemiplegic type of cerebral palsy from a special school in KwaZulu Natal participated after fully informed written consent. The intervention consisted of a 12-week program of weight bearing. The Tekscan Grip system was used to quantify weight borne through the hand during extended arm prone and quadruped positions and whilst holding a pencil and a tumbler. The modified Ashworth grading of spasticity was used to monitor spasticity. The data was analysed using the random effects GLS model Wald Chi Square test. Significant increases in contact pressure in extended arms prone (p=0,012 and quadruped (p=0,002 and when holding a pencil (p=0,045 was noted post-test compared to pre-test. Significant increases in contact area of the hand was also noted in prone (p=0,000, quadruped (p=0, 03 at assessment 7 and when holding a pencil (p=0,035.  A significant decrease in spasticity during elbow extension (p=0,004, and wrist flexion (p=0,026 and extension (p=0,004 was noted. An overall significant effect of static weight bearing exercises on weight borne through the hands, grip strength and spasticity justifies the use of static weight-bearing in therapy.

  11. Weight-bearing recommendations after operative fracture treatment-fact or fiction? Gait results with and feasibility of a dynamic, continuous pedobarography insole.

    Science.gov (United States)

    Braun, Benedikt J; Veith, Nils T; Rollmann, Mika; Orth, Marcel; Fritz, Tobias; Herath, Steven C; Holstein, Jörg H; Pohlemann, Tim

    2017-08-01

    Rehabilitation after lower-extremity fractures is based on the physicians' recommendation for non-, partial-, or full weight-bearing. Clinical studies rely on this assumption, but continuous compliance or objective loading rates are unknown. The purpose of this study was to determine the compliance to weight-bearing recommendations by introducing a novel, pedobarography system continuously registering postoperative ground forces into ankle, tibial shaft and proximal femur fracture aftercare and test its feasibility for this purpose. In this prospective, observational study, a continuously measuring pedobarography insole was placed in the patients shoe during the immediate post-operative aftercare after ankle, tibial shaft and intertrochanteric femur fractures. Weight-bearing was ordered as per the institutional standard and controlled by physical therapy. The insole was retrieved after a maximum of six weeks (28 days [range 5-42 days]). Non-compliance was defined as a failure to maintain, or reach the ordered weight-bearing within 30%. Overall 30 patients were included in the study. Fourteen (47%) of the patients were compliant to the weight-bearing recommendations. Within two weeks after surgery patients deviated from the recommendation by over 50%. Sex, age and weight did not influence the performance (p > 0.05). Ankle fracture patients (partial weight-bearing) showed a significantly increased deviation from the recommendation (p = 0.01). Our study results show that, despite physical therapy training, weight-bearing compliance to recommended limits was low. Adherence to the partial weight-bearing task was further decreased over time. Uncontrolled weight-bearing recommendations should thus be viewed with caution and carefully considered as fiction. The presented insole is feasible to determine weight bearing continuously, could immediately help define real-time patient behaviour and establish realistic, individual weight-bearing recommendations.

  12. Weight-bearing exercise and bone mineral accrual in children and adolescents: a review of controlled trials.

    Science.gov (United States)

    Hind, K; Burrows, M

    2007-01-01

    Osteoporosis is a serious skeletal disease and as there is currently no cure, there is a large emphasis on its prevention, including the optimisation of peak bone mass. There is increasing evidence that regular weight-bearing exercise is an effective strategy for enhancing bone status during growth. This systematic review evaluates randomised and non-randomised controlled trials to date, on the effects of exercise on bone mineral accrual in children and adolescents. An online search of Medline and the Cochrane database enabled the identification of studies. Those that met the inclusion criteria were included in the review and graded according to risk for bias. Twenty-two trials were reviewed. Nine were conducted in prepubertal children (Tanner I), 8 in early pubertal (Tanner II-III) and 5 in pubertal (Tanner IV-V). Sample sizes ranged from n=10 to 65 per group. Exercise interventions included games, dance, resistance training and jumping exercises, ranging in duration from 3 to 48 months. Approximately half of the trials (n=10) included ground reaction force (GRF) data (2 to 9 times body weight). All trials in early pubertal children, 6 in pre pubertal and 2 in pubertal children, reported positive effects of exercise on bone (P<0.05). Mean increases in bone parameters over 6 months were 0.9-4.9% in prepubertal, 1.1-5.5% in early pubertal and 0.3-1.9% in pubertal exercisers compared to controls (P<0.05). Although weight-bearing exercise appears to enhance bone mineral accrual in children, particularly during early puberty; it remains unclear as to what constitutes the optimal exercise programme. Many studies to date have a high risk for bias and only a few have a low risk. Major limitations concerned selection procedures, compliance rates and control of variables. More well designed and controlled investigations are needed. Furthermore, the specific exercise intervention that will provide the optimal stimulus for peak bone mineral accretion is unclear. Future

  13. Effects of upright weight bearing and the knee flexion angle on patellofemoral indices using magnetic resonance imaging in patients with patellofemoral instability.

    Science.gov (United States)

    Becher, Christoph; Fleischer, Benjamin; Rase, Marten; Schumacher, Thees; Ettinger, Max; Ostermeier, Sven; Smith, Tomas

    2017-08-01

    This study analysed the effects of upright weight bearing and the knee flexion angle on patellofemoral indices, determined using magnetic resonance imaging (MRI), in patients with patellofemoral instability (PI). Healthy volunteers (control group, n = 9) and PI patients (PI group, n = 16) were scanned in an open-configuration MRI scanner during upright weight bearing and supine non-weight bearing positions at full extension (0° flexion) and at 15°, 30°, and 45° flexion. Patellofemoral indices included the Insall-Salvati Index, Caton-Deschamp Index, and Patellotrochlear Index (PTI) to determine patellar height and the patellar tilt angle (PTA), bisect offset (BO), and the tibial tubercle-trochlear groove (TT-TG) distance to assess patellar rotation and translation with respect to the femur and alignment of the extensor mechanism. A significant interaction effect of weight bearing by flexion angle was observed for the PTI, PTA, and BO for subjects with PI. At full extension, post hoc pairwise comparisons revealed a significant effect of weight bearing on the indices, with increased patellar height and increased PTA and BO in the PI group. Except for the BO, no such changes were seen in the control group. Independent of weight bearing, flexing the knee caused the PTA, BO, and TT-TG distance to be significantly reduced. Upright weight bearing and the knee flexion angle affected patellofemoral MRI indices in PI patients, with significantly increased values at full extension. The observations of this study provide a caution to be considered by professionals when treating PI patients. These patients should be evaluated clinically and radiographically at full extension and various flexion angles in context with quadriceps engagement. Explorative case-control study, Level III.

  14. Gait analysis and weight bearing in pre-clinical joint pain research.

    Science.gov (United States)

    Ängeby Möller, Kristina; Svärd, Heta; Suominen, Anni; Immonen, Jarmo; Holappa, Johanna; Stenfors, Carina

    2018-04-15

    There is a need for better joint pain treatment, but development of new medication has not been successful. Pre-clinical models with readouts that better reflect the clinical situation are needed. In patients with joint pain, pain at rest and pain at walking are two major complaints. We describe a new way of calculating results from gait analysis using the CatWalk™ setup. Rats with monoarthritis induced by injection of Complete Freund's Adjuvant (CFA) intra-articularly into the ankle joint of one hind limb were used to assess gait and dynamic weight bearing. The results show that dynamic weight bearing was markedly reduced for the injected paw. Gait parameters such as amount of normal step sequences, walking speed and duration of step placement were also affected. Treatment with naproxen (an NSAID commonly used for inflammatory pain) attenuated the CFA-induced effects. Pregabalin, which is used for neuropathic pain, had no effect. Reduced dynamic weight bearing during locomotion, assessed and calculated in the way we present here, showed a dose-dependent and lasting normalization after naproxen treatment. In contrast, static weight bearing while standing (Incapacitance tester) showed a significant effect for a limited time only. Mechanical sensitivity (von Frey Optihairs) was completely normalized by naproxen, and the window for testing pharmacological effect disappeared. Objective and reproducible effects, with an endpoint showing face validity compared to pain while walking in patients with joint pain, are achieved by a new way of calculating dynamic weight bearing in monoarthritic rats. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Is weight-bearing asymmetry associated with postural instability after stroke? A systematic review.

    NARCIS (Netherlands)

    Kamphuis, J.F.; Kam, D.C.J. de; Geurts, A.C.H.; Weerdesteijn, V.G.M.

    2013-01-01

    Introduction. Improvement of postural stability is an important goal during poststroke rehabilitation. Since weight-bearing asymmetry (WBA) towards the nonparetic leg is common, training of weight-bearing symmetry has been a major focus in post-stroke balance rehabilitation. It is assumed that

  16. Effect and safety of early weight-bearing on the outcome after open-wedge high tibial osteotomy: a systematic review and meta-analysis.

    Science.gov (United States)

    Lee, O-Sung; Ahn, Soyeon; Lee, Yong Seuk

    2017-07-01

    The purpose of this systematic review and meta-analysis was to evaluate the effectiveness and safety of early weight-bearing by comparing clinical and radiological outcomes between early and traditional delayed weight-bearing after OWHTO. A rigorous and systematic approach was used. The methodological quality was also assessed. Results that are possible to be compared in two or more than two articles were presented as forest plots. A 95% confidence interval was calculated for each effect size, and we calculated the I 2 statistic, which presents the percentage of total variation attributable to the heterogeneity among studies. The random-effects model was used to calculate the effect size. Six articles were included in the final analysis. All case groups were composed of early full weight-bearing within 2 weeks. All control groups were composed of late full weight-bearing between 6 weeks and 2 months. Pooled analysis was possible for the improvement in Lysholm score, but there was no statistically significant difference shown between groups. Other clinical results were also similar between groups. Four studies reported mechanical femorotibial angle (mFTA) and this result showed no statistically significant difference between groups in the pooled analysis. Furthermore, early weight-bearing showed more favorable results in some radiologic results (osseointegration and patellar height) and complications (thrombophlebitis and recurrence). Our analysis supports that early full weight-bearing after OWHTO using a locking plate leads to improvement in outcomes and was comparable to the delayed weight-bearing in terms of clinical and radiological outcomes. On the contrary, early weight-bearing was more favorable with respect to some radiologic parameters and complications compared with delayed weight-bearing.

  17. Permissive weight bearing in trauma patients with fracture of the lower extremities: prospective multicenter comparative cohort study.

    Science.gov (United States)

    Kalmet, Pishtiwan H S; Meys, Guido; V Horn, Yvette Y; Evers, Silvia M A A; Seelen, Henk A M; Hustinx, Paul; Janzing, Heinrich; Vd Veen, Alexander; Jaspars, Coen; Sintenie, Jan Bernard; Blokhuis, Taco J; Poeze, Martijn; Brink, Peter R G

    2018-02-02

    The standard aftercare treatment in surgically treated trauma patients with fractures around or in a joint, known as (peri)- or intra-articular fractures of the lower extremities, is either non-weight bearing or partial weight bearing. We have developed an early permissive weight bearing post-surgery rehabilitation protocol in surgically treated patients with fractures of the lower extremities. In this proposal we want to compare our early permissive weight bearing protocol to the existing current non-weight bearing guidelines in a prospective comparative cohort study. The study is a prospective multicenter comparative cohort study in which two rehabilitation aftercare treatments will be contrasted, i.e. permissive weight bearing and non-weight bearing according to the AO-guideline. The study population consists of patients with a surgically treated fracture of the pelvis/acetabulum or a surgically treated (peri)- or intra-articular fracture of the lower extremities. The inclusion period is 12 months. The duration of follow up is 6 months, with measurements taken at baseline, 2,6,12 and 26 weeks post-surgery. ADL with Lower Extremity Functional Scale. Outcome variables for compliance, as measured with an insole pressure measurement system, encompass peak load and step duration. This study will investigate the (cost-) effectiveness of a permissive weight bearing aftercare protocol. The results will provide evidence whether a permissive weight bearing protocol is more effective than the current non-weight bearing protocol. The study is registered in the Dutch Trial Register ( NTR6077 ). Date of registration: 01-09-2016.

  18. FUNCTIONAL OUTCOMES OF HIP ARTHROSCOPY IN AN ACTIVE DUTY MILITARY POPULATION UTILIZING A CRITERION-BASED EARLY WEIGHT BEARING PROGRESSION.

    Science.gov (United States)

    Shaw, K Aaron; Jacobs, Jeremy M; Evanson, J Richard; Pniewski, Josh; Dickston, Michelle L; Mueller, Terry; Bojescul, John A

    2017-10-01

    Hip arthroscopy allows surgeons to address intra-articular pathology of the hip while avoiding more invasive open surgical dislocation. However the post-operative rehabilitation protocols have varied greatly in the literature, with many having prolonged periods of limited motion and weight bearing. The purpose of this study was to describe a criterion-based early weight bearing protocol following hip arthroscopy and investigate functional outcomes in the subjects who were active duty military. Active duty personnel undergoing hip arthroscopy for symptomatic femoroacetabular impingement were prospectively assessed in a controlled environment for the ability to incorporate early postoperative weight-bearing with the following criteria: no increased pain complaint with weight bearing and normalized gait pattern. Modified Harris Hip (HHS) and Hip Outcome score (HOS) were performed preoperatively and at six months post-op. Participants were progressed with a standard hip arthroscopy protocol. Hip flexion was limited to not exceed 90 degrees for the first three weeks post-op, with progression back to running beginning at three months. Final discharge was dependent upon the ability to run two miles at military specified pace and do a single leg broad jump within six inches of the contralateral leg without an increase in pain. Eleven participants met inclusion criteria over the study period. Crutch use was discontinued at an average of five days following surgery based on established weight bearing criteria. Only one participant required continued crutch use at 15 days. Participants' functional outcome was improved postoperatively, as demonstrated by significant increases in HOS and HHS. At the six month follow up, eight of 11 participants were able to take and complete a full Army Physical Fitness Test. Following completion of the early weight bearing rehabilitation protocol, 81% of participants were able to progress to full weight bearing by four days post

  19. Appearance of the weight-bearing lateral radiograph in retrocalcaneal bursitis

    Science.gov (United States)

    Muller, Bart; Maas, Mario; Sierevelt, Inger N; van Dijk, C Niek

    2010-01-01

    Background and purpose A retrocalcaneal bursitis is caused by repetitive impingement of the bursa between the Achilles tendon and the posterosuperior calcaneus. The bursa is situated in the posteroinferior corner of Kager's triangle (retrocalcaneal recess), which is a radiolucency with sharp borders on the lateral radiograph of the ankle. If there is inflammation, the fluid-filled bursa is less radiolucent, making it difficult to delineate the retrocalcaneal recess. We assessed whether the radiographic appearance of the retrocalcaneal recess on plain digital (filmless) radiographs could be used in the diagnosis of a retrocalcaneal bursitis. Methods Whether or not there was obliteration of the retrocalcaneal recess (yes/no) on 74 digital weight-bearing lateral radiographs of the ankle was independently assessed by 2 observers. The radiographs were from 24 patients (25 heels) with retrocalcaneal bursitis (confirmed on endoscopic calcaneoplasty); the control group consisted of 50 patients (59 heels). Results The sensitivity of the test was 83% for observer 1 and 79% for observer 2. Specificity was 100% and 98%, respectively. The kappa value of the interobserver reliability test was 0.86. For observer 1, intraobserver reliability was 0.96 and for observer 2 it was 0.92. Interpretation On digital weight-bearing lateral radiographs of a retrocalcaneal bursitis, the retrocalcaneal recess has a typical appearance. PMID:20450438

  20. Upright Cone CT of the hindfoot: Comparison of the non-weight-bearing with the upright weight-bearing position

    Energy Technology Data Exchange (ETDEWEB)

    Hirschmann, Anna; Pfirrmann, Christian W.A.; Buck, Florian M. [University of Zurich, Department of Radiology, Orthopaedic University Hospital Balgrist, Zurich (Switzerland); Klammer, Georg; Espinosa, Norman [University of Zurich, Department of Orthopedic Surgery, Orthopaedic University Hospital Balgrist, Zurich (Switzerland)

    2014-03-15

    To prospectively compare computed tomography (CT) of the hindfoot in the supine non-weight-bearing position (NWBCT) with upright weight-bearing position (WBCT). Institutional review board approval and informed consent of all patients were obtained. NWBCT and WBCT scans of the ankle were obtained in 22 patients (mean age, 46.0 ± 17.1 years; range 19-75 years) using a conventional 64-row CT for NWBCT and a novel cone-beam CT for WBCT. Two musculoskeletal radiologists independently performed the following measurements: the hindfoot alignment angle, fibulocalcaneal and tibiocalcaneal distances, lateral talocalcaneal joint space width, talocalcaneal overlap and naviculocalcaneal distance. Significant changes between NWBCT and WBCT were sought using Wilcoxon signed-rank test. P values <0.05 were considered statistically significant. Significant differences were found for all measurements except the hindfoot alignment angle and tibiocalcaneal distance. Significant measurement results were as follows (NWBCT/WBCT reader 1; NWBCT/WBCT reader 2, mean ± standard deviation): fibulocalcaneal distance 3.6 mm ± 5.2/0.3 mm ± 6.0 (P = 0.006); 1.4 mm ± 6.3/-1.1 mm ± 6.3 (P = 0.002), lateral talocalcaneal joint space width 2.9 mm ± 1.7/2.2 mm ± 1.1 (P = 0.005); 3.4 mm ± 1.9/2.4 mm ± 1.3 (P = 0.001), talocalcaneal overlap 4.1 mm ± 3.9/1.4 mm ± 3.9 (P = 0.001); 4.5 mm ± 4.3/1.4 mm ± 3.7 (P < 0.001) and naviculocalcaneal distance 13.5 mm ± 4.0/15.3 mm ± 4.7 (P = 0.037); 14.0 mm ± 4.4/15.7 mm ± 6.2 (P = 0.100). Interreader agreement was good to excellent (ICC 0.48-0.94). Alignment of the hindfoot significantly changes in the upright weight-bearing CT position. Differences can be visualised and measured using WBCT. (orig.)

  1. Radiographic changes and factors associated with subsequent progression of damage in weight-bearing joints of patients with rheumatoid arthritis under TNF-blocking therapies-three-year observational study.

    Science.gov (United States)

    Matsushita, Isao; Motomura, Hiraku; Seki, Eiko; Kimura, Tomoatsu

    2017-07-01

    The long-term effects of tumor necrosis factor (TNF)-blocking therapies on weight-bearing joints in patients with rheumatoid arthritis (RA) have not been fully characterized. The purpose of this study was to assess the radiographic changes of weight-bearing joints in patients with RA during 3-year of TNF-blocking therapies and to identify factors related to the progression of joint damage. Changes in clinical variables and radiological findings in 243 weight-bearing joints (63 hips, 54 knees, 71 ankles, and 55 subtalar joints) in 38 consecutive patients were investigated during three years of treatment with TNF-blocking agents. Multivariate logistic regression analysis was used to identify risk factors for the progression of weight-bearing joint damage. Seventeen (14.5%) of proximal weight-bearing joints (hips and knees) showed apparent radiographic progression during three years of treatment, whereas none of the proximal weight-bearing joints showed radiographic evidence of improvement or repair. In contrast, distal weight-bearing joints (ankle and subtalar joints) displayed radiographic progression and improvement in 20 (15.9%) and 8 (6.3%) joints, respectively. Multivariate logistic analysis for proximal weight-bearing joints identified the baseline Larsen grade (p bearing joints identified disease activity at one year after treatment (p bearing joints. Disease activity after treatment was an independent factor for progression of damage in proximal and distal weight-bearing joints. Early treatment with TNF-blocking agents and tight control of disease activity are necessary to prevent the progression of damage of the weight-bearing joints.

  2. Measuring polyethylene wear in total knee arthroplasty by RSA: differences between weight-bearing and non-weight-bearing positioning.

    Science.gov (United States)

    van Ijsseldijk, Emiel A; Valstar, Edward R; Stoel, Berend C; de Ridder, Ruud; Nelissen, Rob G H H; Kaptein, Bart L

    2014-04-01

    Measuring the minimum-joint-space-width (mJSW) in total knee arthroplasty (TKA) in Roentgen stereophotogrammetric analysis (RSA) provides valuable information on polyethylene wear, a leading cause for TKA failure. Most existing studies use non-weight-bearing (NWB) patient positioning. The latter may compromise mJSW measurements due to knee laxity with subsequent non-contact between the TKA components. We investigated the difference in mJSW between weight-bearing (WB) and NWB images and the association with mediolateral (ML) knee stability. At one-year follow-up, 23 TKAs were included from an ongoing RSA study, and ML stability was evaluated. For each examination, the mJSW and femoral-tibial contact locations were measured. A linear regression model was used to analyze the association between the mJSW difference (NWB-WB) with the ML stability and contact locations. The mean mJSW difference was 0.28 mm medially and 0.20 mm laterally. Four TKAs had medium (5-9°) and 19 TKAs had high (RSA studies are influenced by knee laxity, but may still provide information on wear progression based on TKA with high ML stability. A direct comparison of mJSW measurements from WB and NWB data is not possible. © 2014 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  3. Foot Loading Characteristics of Different Graduations of Partial Weight Bearing

    Science.gov (United States)

    Gusinde, Johannes; Pauser, Johannes; Swoboda, Bernd; Gelse, Kolja; Carl, Hans-Dieter

    2011-01-01

    Limited weight bearing of the lower extremity is a commonly applied procedure in orthopaedic rehabilitation after reconstructive forefoot surgery, trauma surgery and joint replacement. The most frequent limitations are given as percentage of body weight (BW) and represent 10 or 50% BW. The extent of foot loading under these graduations of partial…

  4. [Contact characteristics research of acetabular weight-bearing area with different internal fixation methods after compression fracture of acetabular dome].

    Science.gov (United States)

    Xu, Bowen; Zhang, Qingsong; An, Siqi; Pei, Baorui; Wu, Xiaobo

    2017-08-01

    To establish the model of compression fracture of acetabular dome, and to measure the contact characteristics of acetabular weight-bearing area of acetabulum after 3 kinds of internal fixation. Sixteen fresh adult half pelvis specimens were randomly divided into 4 groups, 4 specimens each group. Group D was the complete acetabulum (control group), and the remaining 3 groups were prepared acetabular dome compression fracture model. The fractures were fixed with reconstruction plate in group A, antegrade raft screws in group B, and retrograde raft screws in group C. The pressure sensitive films were attached to the femoral head, and the axial compression test was carried out on the inverted single leg standing position. The weight-bearing area, average stress, and peak stress were measured in each group. Under the loading of 500 N, the acetabular weight-bearing area was significantly higher in group D than in other 3 groups ( P area were significantly higher in group B and group C than in group A, and the average stress and peak stress were significantly lower than in group A ( P 0.05). For the compression fracture of the acetabular dome, the contact characteristics of the weight-bearing area can not restore to the normal level, even if the anatomical reduction and rigid internal fixation were performed; compared with the reconstruction plate fixation, antegrade and retrograde raft screws fixations can increase the weight-bearing area, reduce the average stress and peak stress, and reduce the incidence of traumatic arthritis.

  5. Outcomes and weight-bearing status during rehabilitation after arthroplasty for hip fractures.

    Science.gov (United States)

    Siebens, Hilary C; Sharkey, Phoebe; Aronow, Harriet U; Horn, Susan D; Munin, Michael C; DeJong, Gerben; Smout, Randall J; Radnay, Craig S

    2012-08-01

    To examine the association of weight-bearing status with patient-related variables and outcomes of inpatient rehabilitation after hip arthroplasty for acute hip fracture. A multi-site prospective observational cohort study. Eighteen skilled nursing and inpatient rehabilitation facilities. Patients with hip fractures (N = 224) treated with hip arthroplasty and admitted to either skilled nursing or inpatient rehabilitation facilities; a subset (N = 84) with telephone follow-up outcomes 8 months after rehabilitation discharge. Measurements included demographic variables, medical severity using the Comprehensive Severity Index, and functional levels using the Functional Independence Measure. MAIN OUTCOMES MEASUREMENT: Cognitive, motor, and total Functional Independence Measure scores at rehabilitation discharge and at 8-month follow-up; living location at discharge and follow-up. Patients on average (standard deviation) were 76.8 ± 11.4 years old, mainly women (78%), and mainly white (87%). In unadjusted analysis, weight bearing as tolerated (WBAT) was associated with less osteoarthritis (P = .025) and lower admission medical severity (ACSI) (P = .014). One participating facility had a significant preponderance of restricted weight-bearing cases. WBAT had no bivariate association with cognitive or motor function at discharge. Therapists cited restricted weight bearing as a barrier to therapy in 11% of cases. In logistic regressions, lower medical admission severity, older age, and one specified site significantly predicted WBAT (c statistic = 0.714). Significant predictors for home discharge included lower maximum severity (P < .001), younger age (P < .001), higher cognition (P = .037), and WBAT (P = .051) (c statistic = 0.863). WBAT is associated with a greater likelihood of home discharge and had similar functional outcomes compared with restricted weight bearing. These findings add support for allowing WBAT after arthroplasty for hip fracture. Copyright © 2012

  6. Real-time visual biofeedback during weight bearing improves therapy compliance in patients following lower extremity fractures

    NARCIS (Netherlands)

    Raaben, Marco; Holtslag, Herman R.; Leenen, Luke P. H.; Augustine, Robin; Blokhuis, Taco J.

    2017-01-01

    Individuals with lower extremity fractures are often instructed on how much weight to bear on the affected extremity. Previous studies have shown limited therapy compliance in weight bearing during rehabilitation. In this study we investigated the effect of real-time visual biofeedback on weight

  7. Characteristics of postoperative weight bearing and management protocols for tibial plateau fractures: Findings from a scoping review.

    Science.gov (United States)

    Arnold, John B; Tu, Chen Gang; Phan, Tri M; Rickman, Mark; Varghese, Viju Daniel; Thewlis, Dominic; Solomon, Lucian B

    2017-12-01

    To identify and describe the characteristics of existing practices for postoperative weight bearing and management of tibial plateau fractures (TPFs), identify gaps in the literature, and inform the design of future research. Seven electronic databases and clinical trial registers were searched from inception until November 17th 2016. Studies were included if they reported on the surgical management of TPFs, had a mean follow-up time of ≥1year and provided data on postoperative management protocols. Data were extracted and synthesized according to study demographics, patient characteristics and postoperative management (weight bearing regimes, immobilisation devices, exercises and complications). 124 studies were included involving 5156 patients with TPFs. The mean age across studies was 45.1 years (range 20.8-72; 60% male), with a mean follow-up of 34.9 months (range 12-264). The most frequent fracture types were AO/OTA classification 41-B3 (29.5%) and C3 (25%). The most commonly reported non-weight bearing time after surgery was 4-6 weeks (39% of studies), with a further 4-6 weeks of partial weight bearing (51% of studies), resulting in 9-12 weeks before full weight bearing status was recommended (55% of studies). Loading recommendations for initial weight bearing were most commonly toe-touch/bearing was positively correlated with the proportion of fractures of AO/OTA type C (r=0.465, p=0.029) and Schatzker type IV-VI (r=0.614, pbearing time before full weight bearing is recommended at 9-12 weeks. Partial weight bearing protocols and brace use were varied. Type of rehabilitation may be an important factor influencing recovery, with future high quality prospective studies required to determine the impact of different protocols on clinical and radiological outcomes. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  8. Connectivity strategies to enhance the capacity of weight-bearing networks

    International Nuclear Information System (INIS)

    Janaki, T.M.; Gupte, Neelima

    2003-01-01

    The connectivity properties of a weight-bearing network are exploited to enhance its capacity. We study a 2D network of sites where the weight-bearing capacity of a given site depends on the capacities of the sites connected to it in the layers above. The network consists of clusters, viz., a set of sites connected with each other with the largest such collection of sites being denoted as the maximal cluster. New connections are made between sites in successive layers using two distinct strategies. The key element of our strategies consists of adding as many disjoint clusters as possible to the sites on the trunk T of the maximal cluster. In the first strategy the reconnections start from the last layer upwards and stop when no new sites are added. In the second case, the reconnections start from the top layer and go all the way down to the last layer. The new networks can bear much higher weights than the original networks and have much lower failure rates. The first strategy leads to a greater enhancement of stability, whereas the second leads to a greater enhancement of capacity compared to the original networks. The original network used here is a typical example of the branching hierarchical class. However, the application of strategies similar to ours can yield useful results in other types of networks as well

  9. Real-time visual biofeedback during weight bearing improves therapy compliance in patients following lower extremity fractures

    NARCIS (Netherlands)

    Raaben, Marco; Holtslag, Herman R; Leenen, Luke P H; Augustine, Robin; Blokhuis, Taco J

    BACKGROUND: Individuals with lower extremity fractures are often instructed on how much weight to bear on the affected extremity. Previous studies have shown limited therapy compliance in weight bearing during rehabilitation. In this study we investigated the effect of real-time visual biofeedback

  10. Effect of partial weight bearing program on functional ability and ...

    African Journals Online (AJOL)

    Lilian A. Zaky

    2013-03-17

    Mar 17, 2013 ... essence of the importance of partial weight bearing program in rehabilitation of lower limb condi ... and long term physical and psychosocial impairments [11,12]. .... gram for their functional walking using the 6-min walking test,.

  11. Inadequate thickness of the weight-bearing surface of claws in ruminants : clinical review

    Directory of Open Access Journals (Sweden)

    A.S. Shakespeare

    2009-05-01

    Full Text Available The term 'thin soles' refers to the suboptimal thickness of the weight-bearing surface of claws in ruminants. These palmar / plantar surfaces of the claws support the weight of the animal and consist of the distal wall horn, the sole proper, the heel and the minute white line area. The sole should normally only bear weight on uneven or undulating surfaces. A decrease in the thickness of the weight-bearing claw surface will decrease the protective function of this structure and may alter the proportion of weight-bearing by each section with possible detrimental effects on hoof function. Horn tissue readily absorbs water and becomes softer which can lead to increased wear rates. Growth rates normally match wear rates but, unlike the latter, time is needed for the growth rate response to adapt to changes in wear rate. Concrete surfaces can be abrasive and dairy cows that spend their lactation cycle on these floors should be let out to pasture in the dry period so that their claws can recoup lost horn. Frictional coefficient is a measure of the 'slipperiness' of hooves on various surfaces. Newly laid or fresh concrete is not only abrasive but the thin surface suspension of calcium hydroxide that forms has a very alkaline pH which causes keratin degradation and is mostly responsible for the excessive claw wear that occurs. Four case studies are used to illustrate the importance of the distal wall horn, the dangers of over-trimming and the effects of disease and concrete on horn growth and wear rates.

  12. Initial non-weight-bearing therapy is important for preventing vertebral body collapse in elderly patients with clinical vertebral fractures

    Directory of Open Access Journals (Sweden)

    Kishikawa Y

    2012-04-01

    Full Text Available Yoichi KishikawaKishikawa Orthopaedic Clinic, Saga City, Saga, JapanPurpose: The aim of the present conventional observational study was to compare the clinical outcomes of initial non-weight-bearing therapy and conventional relative rest therapy among elderly patients with clinical vertebral fractures.Methods: In total, 196 consecutive patients with clinical vertebral fractures (mean age: 78 years who were hospitalized for treatment between January 1999 and March 2007 were analyzed. Initial non-weight-bearing therapy consisted of complete bed rest allowing rolling on the bed without any weight-bearing to the spine for 2 weeks, followed by rehabilitation wearing a soft brace. The indications for initial non-weight-bearing therapy were vertebral fracture involving the posterior portion of the vertebral body at the thoraco-lumbar spine, mild neurological deficit, instability of the fracture site, severe pain, multiple vertebral fractures arising from trauma, malalignment at the fracture site, and mild spinal canal stenosis caused by the fracture. Patients who met the indication criteria were treated with initial non-weight-bearing therapy (n = 103, while the other patients were treated with conventional relative rest (n = 93. All the patients were uniformly treated with intramuscular elcatonin to relieve pain. The primary endpoint was progression of the vertebral fracture. The secondary endpoints included bony union and subjective back pain. The follow-up period was 12 weeks.Results: Compared with the conventional relative rest group, the collapse rate of the anterior and posterior portions of the vertebral body was significantly smaller in the initial non-weight-bearing group. The bony union rate was 100% in the initial non-weight-bearing group and 97% in the conventional relative rest group. The number of patients who experienced back pain was significantly lower in the initial non-weight-bearing group than in the conventional relative rest

  13. Do Knee Bracing and Delayed Weight Bearing Affect Mid-Term Functional Outcome after Anterior Cruciate Ligament Reconstruction?

    Science.gov (United States)

    Di Miceli, Riccardo; Marambio, Carlotta Bustos; Zati, Alessandro; Monesi, Roberta; Benedetti, Maria Grazia

    2017-12-01

    Purpose  The aim of this study was to assess the effect of knee bracing and timing of full weight bearing after anterior cruciate ligament reconstruction (ACLR) on functional outcomes at mid-term follow-up. Methods  We performed a retrospective study on 41 patients with ACLR. Patients were divided in two groups: ACLR group, who received isolated ACL reconstruction and ACLR-OI group who received ACL reconstruction and adjunctive surgery. Information about age at surgery, bracing, full or progressive weight bearing permission after surgery were collected for the two groups. Subjective IKDC score was obtained at follow-up. Statistical analysis was performed to compare the two groups for IKDC score. Subgroup analysis was performed to assess the effect of postoperative regimen (knee bracing and weight bearing) on functional outcomes. Results  The mean age of patients was 30.8 ± 10.6 years. Mean IKDC score was 87.4 ± 13.9. The mean follow-up was 3.5 ± 1.8 years. Twenty-two (53.7%) patients underwent ACLR only, while 19 (46.3%) also received other interventions, such as meniscal repair and/or collateral ligament suture. Analysis of overall data showed no differences between the groups for IKDC score. Patients in the ACLR group exhibited a significantly better IKDC score when no brace and full weight bearing after 4 weeks from surgery was prescribed in comparison with patients who worn a brace and had delayed full weight bearing. No differences were found with respect to the use of brace and postoperative weight bearing regimen in the ACLR-OI group. Conclusion  Brace and delayed weight bearing after ACLR have a negative influence on long-term functional outcomes. Further research is required to explore possible differences in the patients operated on ACLR and other intervention with respect to the use of a brace and the timing of full weight bearing to identify optimal recovery strategies. Level of Evidence  Level III, retrospective observational

  14. Associations of lifetime walking and weight bearing exercise with accelerometer-measured high impact physical activity in later life.

    Science.gov (United States)

    Elhakeem, Ahmed; Hannam, Kimberly; Deere, Kevin C; Hartley, April; Clark, Emma M; Moss, Charlotte; Edwards, Mark H; Dennison, Elaine; Gaysin, Tim; Kuh, Diana; Wong, Andrew; Fox, Kenneth R; Cooper, Cyrus; Cooper, Rachel; Tobias, Jon H

    2017-12-01

    High impact physical activity (PA) is thought to benefit bone. We examined associations of lifetime walking and weight bearing exercise with accelerometer-measured high impact and overall PA in later life. Data were from 848 participants (66.2% female, mean age = 72.4 years) from the Cohort for Skeletal Health in Bristol and Avon, Hertfordshire Cohort Study and MRC National Survey of Health and Development. Acceleration peaks from seven-day hip-worn accelerometer recordings were used to derive counts of high impact and overall PA. Walking and weight bearing exercise up to age 18, between 18-29, 30-49 and since age 50 were recalled using questionnaires. Responses in each age category were dichotomised and cumulative scores derived. Linear regression was used for analysis. Greater lifetime walking was related to higher overall, but not high impact PA, whereas greater lifetime weight bearing exercise was related to higher overall and high impact PA. For example, fully-adjusted differences in log-overall and log-high impact PA respectively for highest versus lowest lifetime scores were: walking [0.224 (0.087, 0.362) and 0.239 (- 0.058, 0.536)], and weight bearing exercise [0.754 (0.432, 1.076) and 0.587 (0.270, 0.904)]. For both walking and weight bearing exercise, associations were strongest in the 'since age 50' category. Those reporting the most walking and weight bearing exercise since age 50 had highest overall and high impact PA, e.g. fully-adjusted difference in log-high impact PA versus least walking and weight bearing exercise = 0.588 (0.226, 0.951). Promoting walking and weight bearing exercise from midlife may help increase potentially osteogenic PA levels in later life.

  15. Controllable sliding bearings and controllable lubrication principles-an overview

    DEFF Research Database (Denmark)

    Santos, Ilmar F.

    2018-01-01

    -mechanical actuators have been coupled to such bearings. Depending on (i) the actuator type; (ii) the actuation principle, i.e., hydraulic, pneumatic, piezoelectric or magnetic among others; and (iii) how such an actuator is coupled to the sliding bearings, different regulation and control actions of fluid film...... bearing gap and its preload via moveable and compliant sliding surfaces; and (d) the control of the lubricant viscosity. All four parameters, i.e., pressure, flow (velocity profiles), gap and viscosity, are explicit parameters in the modified form of Reynolds' equations for active lubrication....... In this framework, this paper gives one main original contribution to the state-of-the-art of radial sliding bearings and controllable lubrication: a comprehensive overview about the different types of controllable sliding bearings and principles used by several authors. The paper ends with some conclusive remarks...

  16. A hippotherapy simulator is effective to shift weight bearing toward the affected side during gait in patients with stroke.

    Science.gov (United States)

    Sung, Yun-Hee; Kim, Chang-Ju; Yu, Byong-Kyu; Kim, Kyeong-Mi

    2013-01-01

    We investigated whether a hippotherapy simulator has influence on symmetric body weight bearing during gait in patients with stroke. Stroke patients were divided into a control group (n = 10) that received conventional rehabilitation for 60 min/day, 5 times/week for 4 weeks and an experimental group (n = 10) that used a hippotherapy simulator for 15 min/day, 5 times/week for 4 weeks after conventional rehabilitation for 45 min/day. Temporospatial gait assessed using OptoGait and trunk muscles (abdominis and erector spinae on affected side) activity evaluated using surface electromyography during sit-to-stand and gait. Prior to starting the experiment, pre-testing was performed. At the end of the 4-week intervention, we performed post-testing. Activation of the erector spinae in the experimental group was significantly increased compared to that in the control group (p hippotherapy simulator compared to control group (p hippotherapy simulator to patients with stroke can improve asymmetric weight bearing by influencing trunk muscles.

  17. Effect of Symmetry Improvement in Weight Bearing on Postural Stability of Hemiparetic Patients

    Directory of Open Access Journals (Sweden)

    Hossein Asghar-Hosseini

    2008-07-01

    Full Text Available Objective: Impaired postural control has been known as the main cause of fall in hemiparesis after stroke. Is Asymmetry of weight bearing on lower limb is one of the prominent characteristics of postural imbalance in these patients. The aim of this study was to evaluate the effect of symmetry improvement in weight bearing through therapeutic interventions on postural stability in hemiparetic patients. Materials & Methods: In this quasi – experimental study which 27 hemiparetic patients were selected through sample of convenience by simple method from men and women who were referred to neurology clinic of Hazrat-e-Rasool hospital. For postural assessment patients stood quietly with open eyes and close eyes on force plates. Primary assessments included evaluation of asymmetry index (AI, RMS COP displacement (Root Mean Square of Center of Pressure and RMS COP velocity in both frontal and sagital planes. Then a 10mm lift was inserted under the unaffected limb and primary assessments were repeated. Data were analyzed by repeated measure ANOVA test. Results: Simple main effect of lift on asymmetry index was significant (P<0/0001. There was no significant interaction between vision and lift. Simple main effect of lift on postural stability variables was also non significant (for RMS COP displacement in frontal and sagital planes P=0.186 and P=0.245, respectively and for RMS COP velocity P=0.259 and P=0.342 respectively. Conclusion: Inserting a lift can improve symmetry by shifting center of gravity to midline. Since symmetry improvement did not decrease postural instability, asymmetric weight bearing can not be the primary cause of postural instability and may not be the principal target of rehabilitation programs aiming at restoring standing balance after stroke.

  18. A comparison between the dimensions of positive transtibial residual limb molds prepared by air pressure casting and weight-bearing casting methods.

    Science.gov (United States)

    Hajiaghaei, Behnam; Ebrahimi, Ismail; Kamyab, Mojtaba; Saeedi, Hassan; Jalali, Maryam

    2016-01-01

    Creating a socket with proper fit is an important factor to ensure the comfort and control of prosthetic devices. Several techniques are commonly used to cast transtibial stumps but their effect on stump shape deformation is not well understood. This study compares the dimensions, circumferences and volumes of the positive casts and also the socket comfort between two casting methods. Our hypothesis was that the casts prepared by air pressure method have less volume and are more comfortable than those prepared by weight bearing method. Fifteen transtibial unilateral amputees participated in the study. Two weight bearing and air pressure casting methods were utilized for their residual limbs. The diameters and circumferences of various areas of the residual limbs and positive casts were compared. The volumes of two types of casts were measured by a volumeter and compared. Visual Analogue Scale (VAS) was used to measure the sockets fit comfort. Circumferences at 10 and 15 cm below the patella on the casts were significantly smaller in air pressure casting method compared to the weight bearing method (p=0.00 and 0.01 respectively). The volume of the cast in air pressure method was lower than that of the weight bearing method (p=0.006). The amputees found the fit of the sockets prepared by air pressure method more comfortable than the weight bearing sockets (p=0.015). The air pressure casting reduced the circumferences of the distal portion of residual limbs which has more soft tissue and because of its snug fit it provided more comfort for amputees, according to the VAS measurements.

  19. Effect of modified constraint induced movement therapy on weight bearing and protective extension in children with hemiplegic cerebral palsy

    Directory of Open Access Journals (Sweden)

    Masoud Gharib

    2012-01-01

    Full Text Available Background: Constraint induced movement therapy is one of the new therapeutic interventions that limits the performance of intact upper limb with increased use of the affected limb. Aim of this study was to investigate the effects of modified constraint induced movement therapy on weight bearing & protective extension in children with hemiplegic cerebral palsy.Methods: 21 hemiplegic children were selected and randomly divided into experimental and control groups. Common Practices of Occupational Therapy applied for 6 weeks in both groups equally and test group received constrain induced movement therapy for three hours every day. Weight-bearing and protective extension was measured based on quality of test skills of upper limbs (QUEST. Data analyzed using appropriated statistical methods. Results: 11 children in the experimental group (7 girls, 4 boys with mean age 47.2 ± 55.5 months and 10 children in the control group (5 girls, 5 boys with mean age 19.2 ± 10.5 months were studied. No significant difference observed before and after six weeks intervention between two groups (P>0.05. There was a significant change before and after six weeks intervention in both subscales (P<0.05.Conclusion: This study showed that modified constraint induced movement therapy may affect weight bearing, but has no effect on the protective extension.

  20. Effect of Weight-Bearing in Conservative and Operative Management of Fractures of the Base of the Fifth Metatarsal Bone

    Directory of Open Access Journals (Sweden)

    Jae-Yong Park

    2017-01-01

    Full Text Available Background. There is no established principle regarding weight-bearing in conservative and operative management of fifth metatarsal base fractures. Methods. We reviewed 86 patients with acute fifth metatarsal base fractures. Conservatively treated late or early weight-bearing patients were assigned to Group A or C, respectively. Operatively treated late or early weight-bearing patients were assigned to Group B or D, respectively. Results were evaluated by clinical union, bone resorption, and the American Orthopaedic Foot and Ankle Society (AOFAS and Visual Analogue Scale (VAS scores. Results. All 4 groups had bone union at a mean of 6.9 weeks (range, 5.1–15.0. There were no differences between the groups in the AOFAS and VAS scores. In the early weight-bearing groups, there were fewer cases of bone resorption, and the bone unions periods were earlier. Conclusions. Early weight-bearing may help this patient population. Moreover, conservative treatment could be an option in patients with underlying diseases.

  1. Active Vibration Control of Hydrodynamic Journal Bearings

    Science.gov (United States)

    Tůma, J.; Šimek, J.; Škuta, J.; Los, J.; Zavadil, J.

    Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. It is assumed that the journal vibration is measured by a pair of proximity probes. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. The active vibration control was tested with the use of a test rig, which consists of a rotor supported by two controllable journal bearings and driven by an inductive motor up to 23,000 rpm. As it was proved by experiments the active vibration control extends considerably the range of the rotor operational speed.

  2. Slow Recovery of Weight Bearing After Stabilization of Long-Bone Fractures Using Elastic Stable Intramedullary Nails in Children.

    Science.gov (United States)

    Lardelli, Patrizia; Frech-Dörfler, Martina; Holland-Cunz, Stefan; Mayr, Johannes

    2016-03-01

    Stabilization of diaphyseal long-bone fractures using elastic stable intramedullary nails (ESIN) in children promises early mobilization and rapid resumption of full weight bearing. We evaluated the duration of postoperative functional rehabilitation after ESIN, measured by the time from stabilization until first partial weight bearing, full weight bearing, and resumption of school sports. Fifty children with unstable, displaced fractures of the femur or lower leg treated with ESIN between 2002 and 2012 were included in this retrospective analysis. We classified fractures according to the pediatric comprehensive classification of fractures (PCCF). Thirty-five children sustained a femur fracture, and 15 children had a fracture of the lower leg or tibia. The surgeons in charge applied an additional plaster cast in 7 of 15 children who suffered a lower leg fracture. The postoperative time interval until full weight bearing in the group of children who had suffered transverse or short oblique femur fractures was significantly shorter (median: 4.4 weeks; range: 0.1-9.1 weeks) than that in the group who had sustained more complex fracture patterns (median: 6.8 weeks; range: 2.9-13.9 weeks; P = 0.04). Similarly, transverse and short oblique lower leg and tibia fractures required less time until full weight bearing (median: 4.1 weeks; range 2.7-6.0 weeks) than complex lower leg fractures (median: 6.1 weeks; range: 1.3-12.9 weeks; P = 0.04). ESIN proved fairly effective in restoring full weight bearing in transverse or short oblique fractures of the lower extremities but was less effective in complex fractures.

  3. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

  4. Upright CT of the knee: the effect of weight-bearing on joint alignment

    Energy Technology Data Exchange (ETDEWEB)

    Hirschmann, Anna [Orthopedic University Hospital Balgrist, University of Zurich, Department of Radiology, Zurich (Switzerland); University of Basel Hospital, Clinic of Radiology and Nuclear Medicine, Basel (Switzerland); Buck, Florian M.; Pfirrmann, Christian W.A. [Orthopedic University Hospital Balgrist, University of Zurich, Department of Radiology, Zurich (Switzerland); Fucentese, Sandro F. [Orthopedic University Hospital Balgrist, University of Zurich, Orthopedic Surgery, Zurich (Switzerland)

    2015-11-15

    To prospectively compare patellofemoral and femorotibial alignment in supine non-weight-bearing computed tomography (NWBCT) and upright weight-bearing CT (WBCT) and assess the differences in joint alignment. NWBCT and WBCT images of the knee were obtained in 26 patients (mean age, 57.0 ± 15.9 years; range, 21-81) using multiple detector CT for NWBCT and cone-beam extremity CT for WBCT. Two musculoskeletal radiologists independently quantified joint alignment by measuring femorotibial rotation, tibial tuberosity-trochlear groove distance (TTTG), lateral patellar tilt angle, lateral patellar shift, and medial and lateral femorotibial joint space widths. Significant differences between NWBCT and WBCT were sought using Wilcoxon signed-rank test (P-value < 0.05). Significant differences were found for femorotibial rotation (the NWBCT mean changed from 2.7 ± 5.1 (reader 1)/2.6 ± 5.6 (reader 2) external rotation to WBCT 0.4 ± 7.7/0.2 ± 7.5 internal rotation; P = 0.009/P = 0.004), TTTG decrease from NWBCT (13.8 mm ± 5.1/13.9 mm ± 3.9) to WBCT (10.5 mm ± 5.0/10.9 mm ± 5.2; P = 0.008/P = 0.002), lateral patellar tilt angle decrease from NWBCT (15.6 ± 6.7/16.9 ± 7.4) to WBCT (12.5 ± 7.7/15.0 ± 6.2; P = 0.011/P = 0.188). The medial femorotibial joint space decreased from NWBCT (3.9 mm ± 1.4/4.5 mm ± 1.3) to WBCT (2.9 mm ± 2.2/3.5 mm ± 2.2; P = 0.003/P = 0.004). Inter-reader agreement ranged from 0.52-0.97. Knee joint alignment changes significantly in the upright weight-bearing position using CT when compared to supine non-weight-bearing CT. (orig.)

  5. Upright CT of the knee: the effect of weight-bearing on joint alignment

    International Nuclear Information System (INIS)

    Hirschmann, Anna; Buck, Florian M.; Pfirrmann, Christian W.A.; Fucentese, Sandro F.

    2015-01-01

    To prospectively compare patellofemoral and femorotibial alignment in supine non-weight-bearing computed tomography (NWBCT) and upright weight-bearing CT (WBCT) and assess the differences in joint alignment. NWBCT and WBCT images of the knee were obtained in 26 patients (mean age, 57.0 ± 15.9 years; range, 21-81) using multiple detector CT for NWBCT and cone-beam extremity CT for WBCT. Two musculoskeletal radiologists independently quantified joint alignment by measuring femorotibial rotation, tibial tuberosity-trochlear groove distance (TTTG), lateral patellar tilt angle, lateral patellar shift, and medial and lateral femorotibial joint space widths. Significant differences between NWBCT and WBCT were sought using Wilcoxon signed-rank test (P-value < 0.05). Significant differences were found for femorotibial rotation (the NWBCT mean changed from 2.7 ± 5.1 (reader 1)/2.6 ± 5.6 (reader 2) external rotation to WBCT 0.4 ± 7.7/0.2 ± 7.5 internal rotation; P = 0.009/P = 0.004), TTTG decrease from NWBCT (13.8 mm ± 5.1/13.9 mm ± 3.9) to WBCT (10.5 mm ± 5.0/10.9 mm ± 5.2; P = 0.008/P = 0.002), lateral patellar tilt angle decrease from NWBCT (15.6 ± 6.7/16.9 ± 7.4) to WBCT (12.5 ± 7.7/15.0 ± 6.2; P = 0.011/P = 0.188). The medial femorotibial joint space decreased from NWBCT (3.9 mm ± 1.4/4.5 mm ± 1.3) to WBCT (2.9 mm ± 2.2/3.5 mm ± 2.2; P = 0.003/P = 0.004). Inter-reader agreement ranged from 0.52-0.97. Knee joint alignment changes significantly in the upright weight-bearing position using CT when compared to supine non-weight-bearing CT. (orig.)

  6. Arthrosis of the ankle evaluated on films in weight-bearing position

    International Nuclear Information System (INIS)

    Bauer, M.; Bergstroem, B.; Hemborg, A.

    1979-01-01

    About 7 years after a malleolar fracture 113 patients were examined for development of arthrosis. The addition of films exposed in weight-bearing position with a.p. beam direction to views of the ankle joint exposed in supine position did not contribute to the diagnosis of arthrosis. (Auth.)

  7. Postoperative weight bearing and patient reported outcomes at one year following tibial plateau fractures.

    Science.gov (United States)

    Thewlis, Dominic; Fraysse, Francois; Callary, Stuart A; Verghese, Viju Daniel; Jones, Claire F; Findlay, David M; Atkins, Gerald J; Rickman, Mark; Solomon, Lucian B

    2017-07-01

    Tibial plateau fractures are complex and the current evidence for postoperative rehabilitation is weak, especially related to the recommended postoperative weight bearing. The primary aim of this study was to investigate if loading in the first 12 weeks of recovery is associated with patient reported outcome measures at 26 and 52 weeks postoperative. We hypothesized that there would be no association between loading and patient reported outcome measures. Seventeen patients, with a minimum of 52-week follow-up following fragment-specific open reduction and internal fixation for tibial plateau fracture, were selected for this retrospective analysis. Postoperatively, patients were advised to load their limb to a maximum of 20kg during the first 6 weeks. Loading data were collected during walking using force platforms. A ratio of limb loading (affected to unaffected) was calculated at 2, 6 and 12 weeks postoperative. Knee Injury and Osteoarthritis Scores were collected at 6, 12, 26 and 52 weeks postoperative. The association between loading ratios and patient reported outcomes were investigated. Compliance with weight bearing recommendations and changes in the patient reported outcome measures are described. Fracture reduction and migration were assessed on plain radiographs. No fractures demonstrated any measurable postoperative migration at 52 weeks. Significant improvements were seen in all patient reported outcome measures over the first 52 weeks, despite poor adherence to postoperative weight bearing restrictions. There were no associations between weight bearing ratio and patient reported outcomes at 52 weeks postoperative. Significant associations were identified between the loading ratio at 2 weeks and knee-related quality of life at six months (R 2 =0.392), and between the loading ratio at 6 weeks combined with injury severity and knee-related quality of life at 26 weeks (R 2 =0.441). In summary, weight bearing as tolerated does not negatively affect the

  8. Stepping-Motion Motor-Control Subsystem For Testing Bearings

    Science.gov (United States)

    Powers, Charles E.

    1992-01-01

    Control subsystem closed-loop angular-position-control system causing motor and bearing under test to undergo any of variety of continuous or stepping motions. Also used to test bearing-and-motor assemblies, motors, angular-position sensors including rotating shafts, and like. Monitoring subsystem gathers data used to evaluate performance of bearing or other article under test. Monitoring subsystem described in article, "Monitoring Subsystem For Testing Bearings" (GSC-13432).

  9. Modelling of Rotor-gas bearings for Feedback Controller Design

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Niemann, Hans Henrik

    2014-01-01

    Controllable rotor-gas bearings are popular oering adaptability, high speed operation, low friction and clean operation. Rotor-gas bearings are however highly sensitive to disturbances due to the low friction of the injected gas. These undesirable damping properties call for controllers, which ca...... and are shown to accurately describe the dynamical behaviour of the rotor-gas bearing. Design of a controller using the identied models is treated and experiments verify the improvement of the damping properties of the rotor-gas bearing.......Controllable rotor-gas bearings are popular oering adaptability, high speed operation, low friction and clean operation. Rotor-gas bearings are however highly sensitive to disturbances due to the low friction of the injected gas. These undesirable damping properties call for controllers, which can...... be designed from suitable models describing the relation from actuator input to measured shaft position. Current state of the art models of controllable gas bearings however do not provide such relation, which calls for alternative strategies. The present contribution discusses the challenges for feedback...

  10. Direct Model Reference Adaptive Control for a Magnetic Bearing

    Energy Technology Data Exchange (ETDEWEB)

    Durling, Mike [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1999-11-01

    A Direct Model Reference Adaptive Controller (DMRAC) is applied to a magnetic bearing test stand. The bearing of interest is the MBC 500 Magnetic Bearing System manufactured by Magnetic Moments, LLC. The bearing model is presented in state space form and the system transfer function is measured directly using a closed-loop swept sine technique. Next, the bearing models are used to design a phase-lead controller, notch filter and then a DMRAC. The controllers are tuned in simulations and finally are implemented using a combination of MATLAB, SIMULINK and dSPACE. The results show a successful implementation of a DMRAC on the magnetic bearing hardware.

  11. Cranial acetabular retroversion is common in developmental dysplasia of the hip as assessed by the weight bearing position

    DEFF Research Database (Denmark)

    Troelsen, Anders; Mikkelsen, Lone Rømer; Jacobsen, Steffen

    2010-01-01

    The appearance of acetabular version differs between the supine and weight bearing positions in developmental dysplasia of the hip. Weight bearing radiographic evaluation has been recommended to ensure the best coherence between symptoms, functional appearance, and hip deformities. Previous...... prevalence estimates of acetabular retroversion in dysplastic hips have been established in radiographs recorded with the patient supine and with inclusion only if pelvic tilt met standardized criteria. We assessed the prevalence and the extent of acetabular retroversion in dysplastic hip joints in weight...

  12. Effects of obesity on weight-bearing versus weight-supported exercise testing in patients with COPD.

    Science.gov (United States)

    Maatman, Robbert C; Spruit, Martijn A; van Melick, Paula P; Peeters, Jos P I; Rutten, Erica P A; Vanfleteren, Lowie E G W; Wouters, Emiel F M; Franssen, Frits M E

    2016-04-01

    Obesity is associated with increased dyspnoea and reduced health status in patients with chronic obstructive pulmonary disease (COPD). Studies on the effects of obesity on exercise capacity showed divergent results. The objective of this study is to investigate the impact of obesity on weight-bearing versus weight-supported exercise tolerance in obese and normal weight patients, matched for age, gender and degree of airflow limitation. Retrospective analyses of data obtained during pre-pulmonary rehabilitation assessment in 108 obese COPD patients (OB) (age: 61.2 ± 5.3y, FEV1 : 43.2 ± 7.4%, BMI: 34.1 ± 3.9 kg/m(2) ,) and 108 age and FEV1 -matched normal weight COPD patients (NW) (age: 61.7 ± 3.6y, FEV1 : 41.5 ± 8.4%, BMI: 22.9 ± 1.2 kg/m(2) ,). Cardiopulmonary exercise test (CPET) and 6 min walk test (6MWT) were performed, Borg scores for dyspnoea and leg fatigue were recorded, before and after the tests. Six-minute walk distance differed between OB (398 ± 107 m) and NW patients (446 ± 109 m, P exercise load was comparable (OB: 75 ± 29 W, NW: 70 ± 25 W, ns). Dyspnoea (OB 3.2 ± 2.0 vs NW 3.1 ± 1.7, ns) and leg fatigue (OB 2.4 ± 2.3 vs NW 1.9 ± 1.7, ns) were not significantly different in OB compared with NW after 6MWT, or after CPET (dyspnoea: OB 5.1 ± 2.4 vs NW 5.4 ± 2.2, ns; leg fatigue: OB 4.0 ± 2.3 vs NW 4.0 ± 2.7, ns). In contrast to weight-supported exercise, obesity has a negative impact on weight-bearing exercise capacity, despite comparable exercise-related symptoms. The results of this study enhance the understanding of the impact of obesity on physical performance in COPD. © 2015 Asian Pacific Society of Respirology.

  13. Effects of body weight and season on serum lipid concentrations in sloth bears (Melursus ursinus ursinus).

    Science.gov (United States)

    Shanmugam, Arun Attur; Kumar, Jadav Kajal; Selvaraj, Illayaraja; Selvaraj, Vimal

    2011-09-01

    Serum lipid levels were measured in 66 healthy sloth bears (Melursus ursinus ursinus) living under semicaptive conditions with access to natural food resources in the Bannerghatta Biological Park (Karnataka, India), a portion of their native habitat range in the Indian peninsula. Total cholesterol, triglycerides, high-density lipoprotein (HDL) cholesterol, and low-density lipoprotein cholesterol levels were analyzed. The effects of age, body weight, and season on these lipid parameters were statistically evaluated. There were no correlations between age and any of the serum lipid parameters analyzed. Positive correlations of body weight to both triglyceride and HDL cholesterol levels in these bears were identified. In addition, seasonal trends in physiological serum lipid values, potentially due to variations in the sloth bear diet, were identified. Serum triglyceride levels were higher during postmonsoon season and cholesterol levels were higher during winter compared to other seasons. Serum lipid values obtained from sloth bears in this study were also compared to previously published data on other members of the family Ursidae. This is the first report of serum lipid values as a reference for sloth bears. These values can be used as sensitive predictors of overall health and nutritional status to aid in the captive management and feeding of these bears.

  14. Cortical and trabecular bone microstructure did not recover at weight-bearing skeletal sites and progressively deteriorated at non-weight-bearing sites during the year following international space station missions

    NARCIS (Netherlands)

    Vico, L.; van Rietbergen, B.; Vilayphiou, N.; Linossier, M.T.; Locrelle, H.; Normand, M.; Zouch, M.; Gerbaix, M.; Bonnet, N.; Novikov, V.; Thomas, T.; Vassilieva, G.

    2017-01-01

    Risk for premature osteoporosis is a major health concern in astronauts and cosmonauts; the reversibility of the bone lost at the weight-bearing bone sites is not established, although it is suspected to take longer than the mission length. The bone three-dimensional structure and strength that

  15. Delay in weight bearing in surgically treated tibial shaft fractures is associated with impaired healing: a cohort analysis of 166 tibial fractures.

    Science.gov (United States)

    Houben, I B; Raaben, M; Van Basten Batenburg, M; Blokhuis, T J

    2018-04-09

    The relation between timing of weight bearing after a fracture and the healing outcome is yet to be established, thereby limiting the implementation of a possibly beneficial effect for our patients. The current study was undertaken to determine the effect of timing of weight bearing after a surgically treated tibial shaft fracture. Surgically treated diaphyseal tibial fractures were retrospectively studied between 2007 and 2015. The timing of initial weight bearing (IWB) was analysed as a predictor for impaired healing in a multivariate regression. Totally, 166 diaphyseal tibial fractures were included, 86 cases with impaired healing and 80 with normal healing. The mean age was 38.7 years (range 16-89). The mean time until IWB was significantly shorter in the normal fracture healing group (2.6 vs 7.4 weeks, p bearing is independently associated with impaired fracture healing in surgically treated tibial shaft fractures. Unlike other factors such as fracture type or soft tissue condition, early resumption of weight bearing can be influenced by the treating physician and this factor therefore has a direct clinical relevance. This study indicates that early resumption of weight bearing should be the treatment goal in fracture fixation. 3b.

  16. Weight-bearing radiography in total hip replacement

    International Nuclear Information System (INIS)

    Turula, K.B.; Haajanen, J.; Friberg, O.; Lindholm, T.S.; Tallroth, K.

    1985-01-01

    Serial anteroposterior (AP) radiographs of the weight-bearing pelvis and hips were taken of 29 patients with total hip replacement (THR). For constant positioning the patient stands with straight knees on a board with a block between the heels. A U-shaped mercury level strapped to the patient provides a horizontal reference line on the radiograph. On the average, individual variation of pelvic tilt in serial films was 1 0 and pelvic rotation 3.5 0 confirming satisfactory reproducibility. The horizontal reference enables estimation of pre- and postoperative leg length inequality (LLI) and of the angle of the acetabular cup (AA). Reproducibility allows assessment of the exact position of the femoral component and quantitative evaluation of radiolucency and bone resorption around the prosthetic implant in the follow-up of THR. (orig.)

  17. Relationship between pelvic alignment and weight-bearing asymmetry in community-dwelling chronic stroke survivors

    Directory of Open Access Journals (Sweden)

    Suruliraj Karthikbabu

    2016-01-01

    Full Text Available Background and Purpose: Altered pelvic alignment and asymmetrical weight bearing on lower extremities are the most common findings observed in standing and walking after stroke. The purpose of this study was to find the relationship between pelvic alignment and weight-bearing asymmetry (WBA in community-dwelling chronic stroke survivors. Materials and Methods: This cross-sectional study was conducted in tertiary care rehabilitation centers. In standing, the lateral and anterior pelvic tilt angle of chronic stroke survivors was assessed using palpation (PALM™ meter device. The percentage of WBA was measured with two standard weighing scales. Pearson correlation coefficient (r was used to study the correlation between pelvic tilt and WBA. Results: Of 112 study participants, the mean (standard deviation age was 54.7 (11.7 years and the poststroke duration was 14 (11 months. The lateral pelvic tilt on the most affected side and bilateral anterior pelvic tilt were 2.47 (1.8 and 4.4 (1.8 degree, respectively. The percentage of WBA was 23.2 (18.94. There was a high correlation of lateral pelvic tilt with WBA (r = 0.631; P< 0.001 than anterior pelvic tilt (r = 0.44; P< 0.001. Conclusion: Excessive lateral pelvic tilt toward the most affected side in standing may influence the weight-bearing ability of the ipsilateral lower extremity in community-dwelling chronic stroke survivors.

  18. Postero-anterior radiogram of the knee in weight-bearing and semiflexion. Comparison with MR imaging

    International Nuclear Information System (INIS)

    Boegaard, T.; Rudling, O.; Sanfridsson, J.; Jonsson, K.; Saxne, T.; Svensson, B.

    1997-01-01

    Purpose: The purpose was four-fold: to assess the reproducibility of p.a. weight-bearing radiograms of the knee and the minimal joint-space (MJS) width measurements in these radiograms; to compare the MJS with MR-detected cartilage defects; to evaluate the location of these cartilage defects; and to estimate the relation between meniscal abnormalities and joint-space narrowing. Material and Methods: Fifty-nine individuals, aged 41-58 years (mean 50), with chronic knee pain were examined by means of p.a. weight-bearing radiograms in semiflexion with fluoroscopic guidance of the knee joint. The MJS was measured with a standard ruler. On the same day MR imaging was performed with proton-density- and T2-weighted turbo spin-echo on a 1.0 T imager. Meniscal abnormalities and cartilage defects in the tibiofemoral joint (TFJ) were noted. Results and Conclusion: The p.a. view of the knee and the MJS measurements were reproducible. MJS of 3 mm is a limit in diagnosing joint-space narrowing in knees with MR-detected cartilage defects. There was a high proportion (p<0.001) of meniscal abnormality within the narrowed compartments in comparison with those that were not narrowed. A larger number of the cartilage defects (p<0.05) was found in the medial femoral condyle than in any of the other condyles of the TFJ. The defects had a dorsal location (p<0.001) as shown in the weight-bearing radiograms of the knee in semiflexion. (orig.)

  19. Dynamic weight-bearing assessment of pain in knee osteoarthritis

    DEFF Research Database (Denmark)

    Klokker, Louise; Christensen, Robin; Osborne, Richard

    2015-01-01

    PURPOSE: To evaluate the reliability, agreement and smallest detectable change in a measurement instrument for pain and function in knee osteoarthritis; the Dynamic weight-bearing Assessment of Pain (DAP). METHODS: The sample size was set to 20 persons, recruited from the outpatient osteoarthritis...... for intra-rater test (1.95). The three knee bend scores all had ICC above 0.50, showing fair-to-good reliability. None of the knee bend scores showed acceptable SEM and SDC. CONCLUSIONS: The reproducibility of the DAP pain score meets the demands for use in clinical practice and research. The total knee...

  20. Weight bearing cone beam CT scan versus gravity stress radiography for analysis of supination external rotation injuries of the ankle.

    Science.gov (United States)

    Marzo, John M; Kluczynski, Melissa A; Clyde, Corey; Anders, Mark J; Mutty, Christopher E; Ritter, Christopher A

    2017-12-01

    For AO 44-B2 ankle fractures of uncertain stability, the current diagnostic standard is to obtain a gravity stress radiograph, but some have advocated for the use of weight-bearing radiographs. The primary aim was to compare measures of medial clear space (MCS) on weight-bearing cone beam computed tomography (CBCT) scans versus gravity stress radiographs for determining the state of stability of ankle fractures classified as AO SER 44-B2 or Weber B. The secondary aim was to evaluate the details offered by CBCT scans with respect to other findings that may be relevant to patient care. Nine patients were enrolled in this cross-sectional study between April 2016 and February 2017 if they had an AO SER 44-B2 fracture of uncertain stability, had a gravity stress radiograph, and were able to undergo CT scan within seven days. The width of the MCS was measured at the level of the talar dome on all radiographs and at the mid coronal slice on CT. Wilcoxon signed-ranks tests were used to compare MCS between initial radiographs, gravity stress radiographs and weight-bearing CBCT scans. MCS on weight-bearing CBCT scan (1.41±0.41 mm) was significantly less than standard radiographs (3.28±1.63 mm, P=0.004) and gravity stress radiographs (5.82±1.93 mm, P=0.02). There was no statistically significant difference in MCS measured on standard radiographs versus gravity stress radiographs (P=0.11). Detailed review of the multiplanar CT images revealed less than perfect anatomical reduction of the fractures, with residual fibular shortening, posterior displacement, and fracture fragments in the incisura as typical findings. Similar to weight-bearing radiographs, weight-bearing CBCT scan can predict stability of AO 44-B2 ankle fractures by showing restoration of the MCS, and might be used to indicate patients for non-operative treatment. None of the fractures imaged in this study were perfectly reduced however, and further clinical research is necessary to determine if any of the

  1. Evaluation of First-Ray Mobility in Patients with Hallux Valgus Using Weight-Bearing CT and a 3-D Analysis System: A Comparison with Normal Feet.

    Science.gov (United States)

    Kimura, Tadashi; Kubota, Makoto; Taguchi, Tetsuya; Suzuki, Naoki; Hattori, Asaki; Marumo, Keishi

    2017-02-01

    Some physicians report that patients with hallux valgus have hypermobility at the tarsometatarsal (TMT) joint of the first ray and 3-dimensional (3-D) deformity. With use of non-weight-bearing and weight-bearing computed tomography (CT), we evaluated the 3-D mobility of each joint of the first ray in feet with hallux valgus compared with normal feet. Ten feet of 10 patients with hallux valgus and 10 feet of 10 healthy volunteers with no foot disorders were examined. All participants were women. Weight-bearing (a load equivalent to body weight) and non-weight-bearing CT scans were made with use of a device that we developed. Orthogonal coordinate axes were set and a 3-D model was reconstructed. Each joint of the first ray was aligned with the respective proximal bone, and 3-D displacement of the distal bone relative to the proximal bone under loading was quantified. At the talonavicular joint, significantly greater dorsiflexion of the navicular relative to the talus was observed in the hallux valgus group compared with the control group. At the medial cuneonavicular joint, the hallux valgus group showed significantly greater eversion and abduction of the medial cuneiform relative to the navicular. At the first TMT joint, the hallux valgus group showed significantly greater dorsiflexion, inversion, and adduction of the first metatarsal relative to the medial cuneiform. At the first metatarsophalangeal joint, the hallux valgus group showed significantly greater eversion and abduction of the first proximal phalanx relative to the first metatarsal (all p hallux valgus.

  2. Bearing-Only Formation Control for Cascade Multirobots

    Directory of Open Access Journals (Sweden)

    Qing Han

    2016-01-01

    Full Text Available A new formation control method is proposed, which is used to queue multirobots in a single-direction cascade structure. In the cascade formation, each robot is a follower for the previous robot and a leader for the next robot, and the robots in the middle act as both leader and follower. The follower robot can only observe the bearing information of the leader robot. The observability of the cascade leader-follower formation is studied, which shows that the bearing-only observation meets the observability conditions required for the nonlinear system. Based on the bearing-only observations, the unscented Kalman filter (UKF is employed for the state estimation of the leader and the follower robots at all levels, which enables the real-time movement control of the follower robots via the input-output feedback control. Simulation results demonstrate that the proposed approach can efficiently control the formation of multirobots as desired.

  3. Effect of gradual weight-bearing on regenerated articular cartilage after joint distraction and motion in a rabbit model.

    Science.gov (United States)

    Nishino, Tomofumi; Ishii, Tomoo; Chang, Fei; Yanai, Takaji; Watanabe, Arata; Ogawa, Takeshi; Mishima, Hajime; Nakai, Kenjiro; Ochiai, Naoyuki

    2010-05-01

    The purpose of this study was to clarify the effect of gradual weight bearing (GWB) on regenerating cartilage. We developed a novel external fixation device (EFD) with a controllable weight-bearing system and continuous passive motion (CPM). A full-thickness defect was created by resection of the entire articular surface of the tibial plateau after the EFD was fixed in the rabbit's left knee. In the GWB group (n=6), GWB was started 6 weeks after surgery. In the CPM group (n=6), CPM with EFD was applied in the same manner without GWB. The control group (n=5) received only joint distraction. All rabbits were sacrificed 9 weeks after surgery. The central one-third of the regenerated tissue was assessed and scored blindly using a grading scale modified from the International Cartilage Repair Society visual histological assessment scale. The areas stained by Safranin-O and type II collagen antibody were measured, and the percentage of each area was calculated. There was no significant difference in the histological assessment scale among the groups. The percentage of the type II collagen-positive area was significantly larger in the GWB group than in the CPM group. The present study suggests that optimal mechanical stress, such as GWB, may affect regeneration of cartilage, in vivo. Copyright (c) 2009 Orthopaedic Research Society.

  4. Multiscale investigation on the effects of additional weight bearing in combination with low-magnitude high-frequency vibration on bone quality of growing female rats.

    Science.gov (United States)

    Zhang, Tianlong; Gao, Jiazi; Fang, Juan; Gong, He

    2018-03-01

    This study aimed to explore the effects of additional weight bearing in combination with low-magnitude high-frequency vibration (LMHFV; 45 Hz, 0.3 g) on bone quality. One hundred twenty rats were randomly divided into ten groups; namely, sedentary (SED), additional weight bearing in which the rat wears a backpack whose weight is x% of the body weight (WBx; x = 5, 12, 19, 26), basic vibration (V), and additional weight bearing in combination with LMHFV in which the rat wears a backpack whose weight is x% of the body weight (Vx; x = 5, 12, 19, 26). The experiment was conducted for 12 weeks, 7 days per week, and 15 min per day. A three-point bending mechanical test, micro computed tomography, and a nanoindentation test were used. Serum samples were analyzed chemically. Failure load in V19 rats was significantly lower than that in SED rats (P bearing in combination with LMHFV negatively affected the macromechanical properties and microarchitecture of bone. Heavy additional weight bearing, such as 26% of body weight, in combination with LMHFV was able to improve the nanomechanical properties of growing bone material compared with LMHFV. A combined mechanical stimulation was used, which may provide useful information to understand the mechanism of this mechanical stimulation on bone.

  5. Improvement of Roller Bearing Diagnosis with Unlabeled Data Using Cut Edge Weight Confidence Based Tritraining

    Directory of Open Access Journals (Sweden)

    Wei-Li Qin

    2016-01-01

    Full Text Available Roller bearings are one of the most commonly used components in rotational machines. The fault diagnosis of roller bearings thus plays an important role in ensuring the safe functioning of the mechanical systems. However, in most cases of bearing fault diagnosis, there are limited number of labeled data to achieve a proper fault diagnosis. Therefore, exploiting unlabeled data plus few labeled data, this paper proposed a roller bearing fault diagnosis method based on tritraining to improve roller bearing diagnosis performance. To overcome the noise brought by wrong labeling into the classifiers training process, the cut edge weight confidence is introduced into the diagnosis framework. Besides a small trick called suspect principle is adopted to avoid overfitting problem. The proposed method is validated in two independent roller bearing fault experiment vibrational signals that both include three types of faults: inner-ring fault, outer-ring fault, and rolling element fault. The results demonstrate the desirable diagnostic performance improvement by the proposed method in the extreme situation where there is only limited number of labeled data.

  6. Piezoelectric actuators in the active vibration control system of journal bearings

    Science.gov (United States)

    Tůma, J.; Šimek, J.; Mahdal, M.; Pawlenka, M.; Wagnerova, R.

    2017-07-01

    The advantage of journal hydrodynamic bearings is high radial load capacity and operation at high speeds. The disadvantage is the excitation of vibrations, called an oil whirl, after crossing a certain threshold of the rotational speed. The mentioned vibrations can be suppressed using the system of the active vibration control with piezoactuators which move the bearing bushing. The motion of the bearing bushing is controlled by a feedback controller, which responds to the change in position of the bearing journal which is sensed by a pair of capacitive sensors. Two stacked linear piezoactuators are used to actuate the position of the bearing journal. This new bearing enables not only to damp vibrations but also serves to maintain the desired bearing journal position with an accuracy of micrometers. The paper will focus on the effect of active vibration control on the performance characteristics of the journal bearing.

  7. Is Weight-Bearing Asymmetry Associated with Postural Instability after Stroke? A Systematic Review

    Directory of Open Access Journals (Sweden)

    Jip F. Kamphuis

    2013-01-01

    Full Text Available Introduction. Improvement of postural stability is an important goal during poststroke rehabilitation. Since weight-bearing asymmetry (WBA towards the nonparetic leg is common, training of weight-bearing symmetry has been a major focus in post-stroke balance rehabilitation. It is assumed that restoration of a more symmetrical weight distribution is associated with improved postural stability. Objective. To determine to what extent WBA is associated with postural instability in people after stroke. Methods. Electronic databases were searched (Cochrane, MEDLINE, EMBASE, and CINAHL until March 2012. Main Eligibility Criteria. (1 Participants were people after stroke. (2 The association between WBA and postural stability was reported. Quality of reporting was assessed with the STROBE checklist and a related tool for reporting of confounding. Results. Nine observational studies met all criteria. Greater spontaneous WBA was associated with higher center of pressure (COP velocity and with poorer synchronization of COP trajectories between the legs (two and one studies, resp.. Evidence for associations between WBA and performance on clinical balance tests or falls was weak. Conclusion. Greater WBA after stroke was associated with increased postural sway, but the current literature does not provide evidence for a causal relationship. Further studies should investigate whether reducing WBA would improve postural stability.

  8. Assessment of Brown Bear\\'s (Ursus arctos syriacus Winter Habitat Using Geographically Weighted Regression and Generalized Linear Model in South of Iran

    Directory of Open Access Journals (Sweden)

    A. A. Zarei

    2016-03-01

    Full Text Available Winter dens are one of the important components of brown bear's (Ursus arctos syriacus habitat, affecting their reproduction and survival. Therefore identification of factors affecting the habitat selection and suitable denning areas in the conservation of our largest carnivore is necessary. We used Geographically Weighted Logistic Regression (GWLR and Generalized Linear Model (GLM for modeling suitability of denning habitat in Kouhkhom region in Fars province. In the present research, 20 dens (presence locations and 20 caves where signs of bear were not found (absence locations were used as dependent variables and six environmental factors were used for each location as independent variables. The results of GLM showed that variables of distance to settlements, altitude, and distance to water were the most important parameters affecting suitability of the brown bear's denning habitat. The results of GWLR showed the significant local variations in the relationship between occurrence of brown bear dens and the variable of distance to settlements. Based on the results of both models, suitable habitats for denning of the species are impassable areas in the mountains and inaccessible for humans.

  9. The Immediate Effect of a Textured Insole in Nonparetic Lower Limb Symmetry of Weight Bearing and Gait Parameters in Patients with Chronic Stroke

    Directory of Open Access Journals (Sweden)

    Mehdi Hassan Abadi

    2016-04-01

    Conclusion The current study showed that obligatory use of affected limb side could improve symmetry of weight bearing in walking and standing position of patients with chronic stroke by overcoming the phenomenon of learned lack of using and correcting the failure of sending sensory signals to centers of movement controls. The results of this study showed that unilateral use of textured insole with shore A-80 in the unaffected side could immediately improve weight bearing symmetry and step length symmetry in patients with hemiparesis, but it has no effect on their walking speed and step length. Using insole with A-60 hardness did not significantly change any variables of tests. Considering the results of this study, these insoles can be used in balance exercises and walking of hemiparetic patients.

  10. Exploring integral controllers in actively-lubricated tilting-pad journal bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2015-01-01

    investigation of integral controllers for feedback-controlled lubrication with the aim of: a) presetting the static journal center and consequently exploring the changes of bearing dynamic properties; b) obtaining an integral controller capable of re-positioning the static journal eccentricity for matching......Active tilting-pad journal bearings with radial oil injection combine good stability properties of conventional tilting-pad journal bearings with the capability of improving their dynamic properties even more by control techniques. The main contribution of this work is the experimental...

  11. The effect of non-weight bearing group-exercising on females with non-specific chronic low back pain: a randomized single blind controlled pilot study.

    Science.gov (United States)

    Masharawi, Youssef; Nadaf, Nedal

    2013-01-01

    The aim of this study was to investigate the effect of active non-weight-bearing (NWB) group exercising on women with non specific chronic low back pain (NSCLBP). Forty females with NSCLBP were assigned in a randomized control longitudinal single blinded pilot study. 20 of them were assigned to a NWB bi-weekly group exercise class and 20 females were included in the control group. The exercises involved the entire lumbo-pelvic spine aimed at improving lumbar mobility/flexibility and stability. Pain intensity (VAS), back specific disability (Rolland Morris questionnaire-RMQ), and lumbar flexion and extension ranges of motion measurements were taken prior to intervention (t(0)), immediately following 4 weeks of intervention (t(1)) and 8 weeks later (t(fu)). Reliability trials were conducted on 10 females. Non-parametric tests were used for statistical significance (p exercising improves functional, painful status, lumbar flexion and extension ranges of motion in women suffering from NSCLBP.

  12. Modelling and Identification for Control of Gas Bearings

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Niemann, Hans Henrik; Santos, Ilmar

    2015-01-01

    Gas bearings are popular for their high speed capabilities, low friction and clean operation, but suffer from poor damping, which poses challenges for safe operation in presence of disturbances. Enhanced damping can be achieved through active lubrication techniques using feedback control laws....... Such control design requires models with low complexity, able to describe the dominant dynamics from actuator input to sensor output over the relevant range of operation. The mathematical models based on first principles are not easy to obtain, and in many cases, they cannot be directly used for control design...... to industrial rotating machinery with gas bearings and to allow for subsequent control design. The paper shows how piezoelectric actuators in a gas bearing are efficiently used to perturb the gas film for identification over relevant ranges of rotational speed and gas injection pressure. Parameter...

  13. Primary observation on the effect of APBMV on tumor weight and general physical condition of hepatoma 22-bearing mice after radiotherapy

    International Nuclear Information System (INIS)

    Kong Tianhan; Wei Ling; Han Xuefei; Dong Weihua

    2000-01-01

    Objective: To observe the effect of antineoplastic polypeptide from buthus martensii venom (APBMV) combined with radiotherapy on hepatoma-bearing mouse. Methods: Hundreds H22-bearing mice were used in this experiment. The tumor growth inhibiting rate (IR%), WBC count, hemoglobin content, activity of superoxide dismutase (SOD), level of lipid peroxide (LPO) and spleens index (SI) were used as the parameters. After radiotherapy (RT) or after administration of different dosage of APBMV combined with RT, the changes of these parameters were observed. Results: On the 6th and 9th day after radiotherapy, the tumor weights decreased after administrating APBMV combined with RT, in which IR were 78.29% and 70.45%, respectively (comparing with RT and APBMV group, P 0.05) among all groups. SOD activity was the lowest and LPO level was the highest in RT group (comparing with the control group, P 22 -bearing mice, SOD activity increased and LPO level decreased evidently (comparing with RT group, P 22 was stronger than radiation or APBMV alone. APBMV can also antagonize radiation injury on H 22 -bearing mice

  14. Fault tolerant homopolar magnetic bearings with flux invariant control

    International Nuclear Information System (INIS)

    Na, Uhn Joo

    2006-01-01

    The theory for a novel fault-tolerant 4-active-pole homopolar magnetic bearing is developed. If any one coil of the four coils in the bearing actuator fail, the remaining three coil currents change via an optimal distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. The homopolar magnetic bearing thus provides unaltered magnetic forces without any loss of the bearing load capacity even if any one coil suddenly fails. Numerical examples are provided to illustrate the novel fault-tolerant, 4-active pole homopolar magnetic bearings

  15. Active vibrations control of journal bearings with the use of piezoactuators

    Science.gov (United States)

    Tůma, Jiří; Šimek, Jiří; Škuta, Jaromír; Los, Jaroslav

    2013-04-01

    Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The controllable journal bearing is a part of a test rig, which consists of a rotor driven by an inductive motor up to 23,000 rpm. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. The journal vibration is measured by a pair of proximity probes. The control system enables run-up, coast-down and steady-state rotation. A real-time simulator dSpace encloses the control loop. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. As it was proved by experiments the active vibration control extends considerably the range of the operational speed.

  16. Reliability of the measures of weight-bearing distribution obtained during quiet stance by digital scales in subjects with and without hemiparesis.

    Science.gov (United States)

    de Araujo-Barbosa, Paulo Henrique Ferreira; de Menezes, Lidiane Teles; Costa, Abraão Souza; Couto Paz, Clarissa Cardoso Dos Santos; Fachin-Martins, Emerson

    2015-05-01

    Described as an alternative way of assessing weight-bearing asymmetries, the measures obtained from digital scales have been used as an index to classify weight-bearing distribution. This study aimed to describe the intra-test and the test/retest reliability of measures in subjects with and without hemiparesis during quiet stance. The percentage of body weight borne by one limb was calculated for a sample of subjects with hemiparesis and for a control group that was matched by gender and age. A two-way analysis of variance was used to verify the intra-test reliability. This analysis was calculated using the differences between the averages of the measures obtained during single, double or triple trials. The intra-class correlation coefficient (ICC) was utilized and data plotted using the Bland-Altman method. The intra-test analysis showed significant differences, only observed in the hemiparesis group, between the measures obtained by single and triple trials. Excellent and moderate ICC values (0.69-0.84) between test and retest were observed in the hemiparesis group, while for control groups ICC values (0.41-0.74) were classified as moderate, progressing from almost poor for measures obtained by a single trial to almost excellent for those obtained by triple trials. In conclusion, good reliability ranging from moderate to excellent classifications was found for participants with and without hemiparesis. Moreover, an improvement of the repeatability was observed with fewer trials for participants with hemiparesis, and with more trials for participants without hemiparesis.

  17. Effects of Patellofemoral Taping on Patellofemoral Joint Alignment and Contact Area During Weight Bearing.

    Science.gov (United States)

    Ho, Kai-Yu; Epstein, Ryan; Garcia, Ron; Riley, Nicole; Lee, Szu-Ping

    2017-02-01

    Study Design Controlled laboratory study. Background Although it has been theorized that patellofemoral joint (PFJ) taping can correct patellar malalignment, the effects of PFJ taping techniques on patellar alignment and contact area have not yet been studied during weight bearing. Objective To examine the effects of 2 taping approaches (Kinesio and McConnell) on PFJ alignment and contact area. Methods Fourteen female subjects with patellofemoral pain and PFJ malalignment participated. Each subject underwent a pretaping magnetic resonance imaging (MRI) scan session and 2 MRI scan sessions after the application of the 2 taping techniques, which aimed to correct lateral patellar displacement. Subjects were asked to report their pain level prior to each scan session. During MRI assessment, subjects were loaded with 25% of body weight on their involved/more symptomatic leg at 0°, 20°, and 40° of knee flexion. The outcome measures included patellar lateral displacement (bisect-offset [BSO] index), mediolateral patellar tilt angle, patellar height (Insall-Salvati ratio), contact area, and pain. Patellofemoral joint alignment and contact area were compared among the 3 conditions (no tape, Kinesio, and McConnell) at 3 knee angles using a 2-factor, repeated-measures analysis of variance. Pain was compared among the 3 conditions using the Friedman test and post hoc Wilcoxon signed-rank tests. Results Our data did not reveal any significant effects of either McConnell or Kinesio taping on the BSO index, patellar tilt angle, Insall-Salvati ratio, or contact area across the 3 knee angles, whereas knee angle had a significant effect on the BSO index and contact area. A reduction in pain was observed after the application of the Kinesio taping technique. Conclusion In a weight-bearing condition, this preliminary study did not support the use of PFJ taping as a medial correction technique to alter the PFJ contact area or alignment of the patella. J Orthop Sports Phys Ther 2017

  18. Active control of multi-input hydraulic journal bearing system

    Science.gov (United States)

    Chuang, Jen-Chen; Chen, Chi-Yin; Tu, Jia-Ying

    2016-09-01

    Because of the advantages of high accuracy, high capacity, and low friction, the development of hydrostatic bearing for machine tool receives significant attention in the last decades. The mechanics and mechanical design of hydrostatic journal bearing with capillary restrictors has been discussed in literature. However, pragmatically, the undesired loading effects of cutting force tend to result in resonance and instability of the rotor and damage the shaft during operation. Therefore, multi-input, active flow control using state feedback design is proposed in this paper. To this purpose, the proportional pressure valves are added to the hydraulic system as active control devices, and the linearised models of the bearing and valve are discussed and identified. Simulation and experimental work is conducted to verify the proposed active control and parameter identification techniques. The results show that the unbalance responses of the rotor are reduced by the proposed state feedback controller, which is able to regulate the flow pressure effectively, thus enhancing the stability and accuracy of the hydraulic journal bearing.

  19. Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient's and Physical Therapist's Perspective.

    Science.gov (United States)

    van Lieshout, Remko; Pisters, Martijn F; Vanwanseele, Benedicte; de Bie, Rob A; Wouters, Eveline J; Stukstette, Mirelle J

    2016-01-01

    Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient's compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user's perspective. To describe the usability from the physical therapists' and a patients' perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. This study gives insight in the usability of two biofeedback devices from the patient's and physical therapist's perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the patient's perspective. The study findings could help

  20. The effect of isolating the paretic limb on weight-bearing distribution and EMG activity during squats in hemiplegic and healthy individuals.

    Science.gov (United States)

    Lee, Dong-Kyu; An, Duk-Hyun; Yoo, Won-Gyu; Hwang, Byong-Yong; Kim, Tae-Ho; Oh, Jae-Seop

    2017-05-01

    Neural reorganization for movement therapy after a stroke is thought to be an important mechanism that facilitates motor recovery. However, there is a lack of evidence for the effectiveness of exercise programs in improving the lower limbs. We investigated the immediate effect of isolating the paretic limb using different foot positions ((i) foot parallel; both feet parallel, (ii) foot asymmetry; paretic foot backward by 10 cm, and (iii) foot lifting; nonparetic foot lifting by normalization to 25% of knee height) on weight-bearing distribution and electromyography (EMG) of the thigh muscle during squats. In total, 20 patients with hemiplegia and 16 healthy subjects randomly performed three squat conditions in which the knee joint was flexed to 30°. Weight distribution was measured using the BioRescue system. Muscle activity was measured using a surface EMG system. Patients with hemiplegia exhibited significantly decreased weight bearing on the paretic foot at 0° and 30° knee flexion compared with the nondominant foot of a healthy subject. The muscle activity of the quadriceps was significantly lower in patients with hemiplegia compared to healthy subjects. Weight bearing and EMG activity of the quadriceps femoris on the paretic or nondominant side significantly increased during a knee flexion of 30° with under the foot asymmetry and foot lifting positions compared with the parallel foot position. Isolating the paretic limb using the asymmetric foot positions and lifting of the foot during squats might help patients with hemiplegia to improve weight-bearing and achieve greater activation of the quadriceps muscle in the paretic limb.

  1. Genetic control of biennial bearing in apple

    Science.gov (United States)

    Guitton, Baptiste; Kelner, Jean-Jacques; Velasco, Riccardo; Gardiner, Susan E.; Chagné, David; Costes, Evelyne

    2012-01-01

    Although flowering in mature fruit trees is recurrent, floral induction can be strongly inhibited by concurrent fruiting, leading to a pattern of irregular fruiting across consecutive years referred to as biennial bearing. The genetic determinants of biennial bearing in apple were investigated using the 114 flowering individuals from an F1 population of 122 genotypes, from a ‘Starkrimson’ (strong biennial bearer)בGranny Smith’ (regular bearer) cross. The number of inflorescences, and the number and the mass of harvested fruit were recorded over 6 years and used to calculate 26 variables and indices quantifying yield, precocity of production, and biennial bearing. Inflorescence traits exhibited the highest genotypic effect, and three quantitative trait loci (QTLs) on linkage group (LG) 4, LG8, and LG10 explained 50% of the phenotypic variability for biennial bearing. Apple orthologues of flowering and hormone-related genes were retrieved from the whole-genome assembly of ‘Golden Delicious’ and their position was compared with QTLs. Four main genomic regions that contain floral integrator genes, meristem identity genes, and gibberellin oxidase genes co-located with QTLs. The results indicated that flowering genes are less likely to be responsible for biennial bearing than hormone-related genes. New hypotheses for the control of biennial bearing emerged from QTL and candidate gene co-locations and suggest the involvement of different physiological processes such as the regulation of flowering genes by hormones. The correlation between tree architecture and biennial bearing is also discussed. PMID:21963613

  2. Enhancing damping of gas bearings using linear parameter-varying control

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Niemann, Hans Henrik; Galeazzi, Roberto

    2017-01-01

    systems to regulate the injection pressure of the fluid. Due to the strong dependencies of system performance on system parameters, the sought controller should be robust over a large range of operational conditions. This paper addresses the damping enhancement of controllable gas bearings through robust...... control approaches. Through an extensive experimental campaign the paper evaluates two robust controllers, a linear parametervarying (LPV) controller and ∞ controller, on their capability to guarantee stability and performance of a gas bearing across the large operational envelopes in rotational speed...

  3. Weight-bearing computed tomography findings in varus ankle osteoarthritis: abnormal internal rotation of the talus in the axial plane.

    Science.gov (United States)

    Kim, Ji-Beom; Yi, Young; Kim, Jae-Young; Cho, Jae-Ho; Kwon, Min-Soo; Choi, Seung-Hyuk; Lee, Woo-Chun

    2017-08-01

    To assess the incidence of abnormal internal rotation of the talus in the axial plane in patients with varus ankle osteoarthritis, and to determine whether this incidence differs from the severity of varus ankle osteoarthritis (moderate versus severe). We retrospectively evaluated weight-bearing computed tomography (CT) and plain radiographs of 52 ankles with no abnormalities (control group) and 96 ankles with varus osteoarthritis (varus-OA group), which were further stratified into a moderate-OA subgroup (50 ankles) and a severe-OA subgroup (46 ankles). A new radiographic parameter on weight-bearing CT, the talus rotation ratio, was used to assess the rotation of the talus in the axial plane. The normal range of the talus rotation ratio was defined as the 95% prediction interval for talus rotation ratio values in the control group. Abnormal internal rotation of the talus was defined for talus rotation ratio values above the normal range. We determined the incidence of abnormal internal rotation of the talus in the varus-OA group, moderate-OA subgroup, and severe-OA subgroup. In the varus-OA group, the incidence of abnormal internal rotation of the talus was 45% (43 ankles), which corresponded to an incidence of 32% (16 ankles) in the moderate-OA subgroup and 59% (27 ankles) in the severe-OA subgroup (p = 0.013). Our study demonstrates that abnormal internal rotation of the talus occurs in patients with varus ankle osteoarthritis, and is more frequently noted in severe than in moderate varus ankle osteoarthritis.

  4. Weight-bearing computed tomography findings in varus ankle osteoarthritis: abnormal internal rotation of the talus in the axial plane

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji-Beom; Yi, Young; Lee, Woo-Chun [Seoul Foot and Ankle Center, Dubalo Orthopaedic Clinic, Seochogu, Seoul (Korea, Republic of); Kim, Jae-Young; Kwon, Min-Soo; Choi, Seung-Hyuk [Inje University Seoul Paik Hospital, Department of Orthopaedic Surgery, Jung-gu, Seoul (Korea, Republic of); Cho, Jae-Ho [Hallym University, ChunCheon Sacred Heart Hospital, Department of Orthopaedic Surgery, Chuncheon, GangWon-do (Korea, Republic of)

    2017-08-15

    To assess the incidence of abnormal internal rotation of the talus in the axial plane in patients with varus ankle osteoarthritis, and to determine whether this incidence differs from the severity of varus ankle osteoarthritis (moderate versus severe). We retrospectively evaluated weight-bearing computed tomography (CT) and plain radiographs of 52 ankles with no abnormalities (control group) and 96 ankles with varus osteoarthritis (varus-OA group), which were further stratified into a moderate-OA subgroup (50 ankles) and a severe-OA subgroup (46 ankles). A new radiographic parameter on weight-bearing CT, the talus rotation ratio, was used to assess the rotation of the talus in the axial plane. The normal range of the talus rotation ratio was defined as the 95% prediction interval for talus rotation ratio values in the control group. Abnormal internal rotation of the talus was defined for talus rotation ratio values above the normal range. We determined the incidence of abnormal internal rotation of the talus in the varus-OA group, moderate-OA subgroup, and severe-OA subgroup. In the varus-OA group, the incidence of abnormal internal rotation of the talus was 45% (43 ankles), which corresponded to an incidence of 32% (16 ankles) in the moderate-OA subgroup and 59% (27 ankles) in the severe-OA subgroup (p = 0.013). Our study demonstrates that abnormal internal rotation of the talus occurs in patients with varus ankle osteoarthritis, and is more frequently noted in severe than in moderate varus ankle osteoarthritis. (orig.)

  5. Weight-bearing computed tomography findings in varus ankle osteoarthritis: abnormal internal rotation of the talus in the axial plane

    International Nuclear Information System (INIS)

    Kim, Ji-Beom; Yi, Young; Lee, Woo-Chun; Kim, Jae-Young; Kwon, Min-Soo; Choi, Seung-Hyuk; Cho, Jae-Ho

    2017-01-01

    To assess the incidence of abnormal internal rotation of the talus in the axial plane in patients with varus ankle osteoarthritis, and to determine whether this incidence differs from the severity of varus ankle osteoarthritis (moderate versus severe). We retrospectively evaluated weight-bearing computed tomography (CT) and plain radiographs of 52 ankles with no abnormalities (control group) and 96 ankles with varus osteoarthritis (varus-OA group), which were further stratified into a moderate-OA subgroup (50 ankles) and a severe-OA subgroup (46 ankles). A new radiographic parameter on weight-bearing CT, the talus rotation ratio, was used to assess the rotation of the talus in the axial plane. The normal range of the talus rotation ratio was defined as the 95% prediction interval for talus rotation ratio values in the control group. Abnormal internal rotation of the talus was defined for talus rotation ratio values above the normal range. We determined the incidence of abnormal internal rotation of the talus in the varus-OA group, moderate-OA subgroup, and severe-OA subgroup. In the varus-OA group, the incidence of abnormal internal rotation of the talus was 45% (43 ankles), which corresponded to an incidence of 32% (16 ankles) in the moderate-OA subgroup and 59% (27 ankles) in the severe-OA subgroup (p = 0.013). Our study demonstrates that abnormal internal rotation of the talus occurs in patients with varus ankle osteoarthritis, and is more frequently noted in severe than in moderate varus ankle osteoarthritis. (orig.)

  6. Electromyographic analysis of the three subdivisions of gluteus medius during weight-bearing exercises

    Directory of Open Access Journals (Sweden)

    O'Sullivan Kieran

    2010-07-01

    Full Text Available Abstract Background Gluteus medius (GM dysfunction is associated with many musculoskeletal disorders. Rehabilitation exercises aimed at strengthening GM appear to improve lower limb kinematics and reduce pain. However, there is a lack of evidence to identify which exercises best activate GM. In particular, as GM consists of three distinct subdivisions, it is unclear if GM activation is consistent across these subdivisions during exercise. The aim of this study was to determine the activation of the anterior, middle and posterior subdivisions of GM during weight-bearing exercises. Methods A single session, repeated-measures design. The activity of each GM subdivision was measured in 15 pain-free subjects using surface electromyography (sEMG during three weight-bearing exercises; wall squat (WS, pelvic drop (PD and wall press (WP. Muscle activity was expressed relative to maximum voluntary isometric contraction (MVIC. Differences in muscle activation were determined using one-way repeated measures ANOVA with post-hoc Bonferroni analysis. Results The activation of each GM subdivision during the exercises was significantly different (interaction effect; p Discussion Posterior GM displayed higher activation across all three exercises than both anterior and middle GM. The WP produced the highest %MVIC activation for all GM subdivisions, and this was most pronounced for posterior GM. Clinicians may use these results to effectively progress strengthening exercises for GM in the rehabilitation of lower extremity injuries.

  7. A Canine Non-Weight-Bearing Model with Radial Neurectomy for Rotator Cuff Repair.

    Directory of Open Access Journals (Sweden)

    Xiaoxi Ji

    Full Text Available The major concern of using a large animal model to study rotator cuff repair is the high rate of repair retears. The purpose of this study was to test a non-weight-bearing (NWB canine model for rotator cuff repair research.First, in the in vitro study, 18 shoulders were randomized to 3 groups. 1 Full-width transections repaired with modified Mason-Allen sutures using 3-0 polyglactin suture, 2 Group 1 repaired using number 2 (#2 polyester braid and long-chain polyethylene suture, and 3 Partial-width transections leaving the superior 2 mm infraspinatus tendon intact without repair. In the in vivo study of 6 dogs, the infraspinatus tendon was partially transected as the same as the in vitro group 3. A radial neurectomy was performed to prevent weight bearing. The operated limb was slung in a custom-made jacket for 6 weeks.In the in vitro study, mean ultimate tensile load and stiffness in Group 2 were significantly higher than Group 1 and 3 (p<0.05. In the in vivo study, gross inspection and histology showed that the preserved superior 2-mm portion of the infraspinatus tendon remained intact with normal structure.Based on the biomechanical and histological findings, this canine NWB model may be an appropriate and useful model for studies of rotator cuff repair.

  8. Radial oil injection applied to main engine bearings: evaluation of injection control rules

    DEFF Research Database (Denmark)

    Estupiñan, EA; Santos, Ilmar

    2012-01-01

    , the dynamic behaviour of the main bearing of a medium-size engine is theoretically analysed when the engine operates with controllable radial oil injection and four different injection control rules. The theoretical investigation is based on a single-cylinder combustion engine model. The performance......The performance of main bearings in a combustion engine affects key functions such as durability, noise and vibration. Thus, with the aim of reducing friction losses and vibrations between the crankshaft and the bearings, the work reported here evaluates different strategies for applying...... controllable radial oil injection to main crankshaft journal bearings. In an actively lubricated bearing, conventional hydrodynamic lubrication is combined with controllable hydrostatic lubrication, where the oil injection pressures can be modified depending on the operational conditions. In this study...

  9. Conical Magnetic Bearings Developed for Active Stall Control in Gas Turbine Engines

    Science.gov (United States)

    Trudell, Jeffrey J.; Kascak, Albert F.; Provenza, Andrew J.; Buccieri, Carl J.

    2004-01-01

    Active stall control is a current research area at the NASA Glenn Research Center that offers a great benefit in specific fuel consumption by allowing the gas turbine to operate beyond the onset of stall. Magnetic bearings are being investigated as a new method to perform active stall control. This enabling global aviation safety technology would result in improved fuel efficiency and decreased carbon dioxide emissions, as well as improve safety and reliability by eliminating oil-related delays and failures of engine components, which account for 40 percent of the commercial aircraft departure delays. Active stall control works by perturbing the flow in front of the compressor stage such that it cancels the pressure wave, which causes the compressor to go into stall. Radial magnetic bearings are able to whirl the shaft so that variations in blade tip leakage would flow upstream causing a perturbation wave that could cancel the rotating stall cell. Axial or thrust magnetic bearings cannot be used to cancel the surge mode in the compressor because they have a very low bandwidth and thus cannot modulate at a high enough frequency. Frequency response is limited because the thrust runner cannot be laminated. To improve the bandwidth of magnetic thrust bearings, researchers must use laminations to suppress the eddy currents. A conical magnetic bearing can be laminated, resulting in increased bandwidth in the axial direction. In addition, this design can produce both radial and thrust force in a single bearing, simplifying the installation. The proposed solution combines the radial and thrust bearing into one design that can be laminated--a conical magnetic bearing. The new conical magnetic bearing test rig, funded by a Glenn fiscal year 2002 Director's Discretionary Fund, was needed because none of the existing rigs has an axial degree of freedom. The rotor bearing configuration will simulate that of the main shaft on a gas turbine engine. One conical magnetic bearing

  10. Characteristic Analysis and Simulated Test of Hybrid Bearing with the Introduction of Piezoelectric Controller

    Directory of Open Access Journals (Sweden)

    Runlin Chen

    2016-01-01

    Full Text Available A novel hybrid bearing with the introduction of piezoelectric controller and tilting pads to control vibration actively is proposed in this paper, and the feasibility of this scheme is verified by theoretical calculation and experimental data. This scheme can control the vibration of bearing actively by using the electromechanical characteristics of piezoelectric ceramic transducer (PZT components. The static internal character of PZT and static external characteristic of piezoelectric control component are analyzed, and the calculation equations of preload coefficient and driving force of the new bearing are given. The simulation setup of the new bearing is designed and developed. The data representing the relationship of displacement of pad pivot, driving force, voltage, and the simulation stiffness of liquid film are obtained in the test, and the feature parameters of piezoelectric control component are amended to analyze the relationship between preload coefficient of the bearing and driving voltage. The proposed new bearing has the function of controlling preload actively. The theoretical and experimental research results provide essential guidance for the detail design of this new bearing and also provide a new idea for the vibration control of high speed rotor systems.

  11. Design and implementation of FPGA-based LQ control of active magnetic bearings

    Energy Technology Data Exchange (ETDEWEB)

    Jastrzebski, R.

    2007-07-01

    The need for high performance, high precision, and energy saving in rotating machinery demands an alternative solution to traditional bearings. Because of the contactless operation principle, the rotating machines employing active magnetic bearings (AMBs) provide many advantages over the traditional ones. The advantages such as contamination-free operation, low maintenance costs, high rotational speeds, low parasitic losses, programmable stiffness and damping, and vibration insulation come at expense of high cost, and complex technical solution. All these properties make the use of AMBs appropriate primarily for specific and highly demanding applications. High performance and high precision control requires model-based control methods and accurate models of the flexible rotor. In turn, complex models lead to high-order controllers and feature considerable computational burden. Fortunately, in the last few years the advancements in signal processing devices provide new perspective on the real-time control of AMBs. The design and the real-time digital implementation of the high-order LQ controllers, which focus on fast execution times, are the subjects of this work. In particular, the control design and implementation in the field programmable gate array (FPGA) circuits are investigated. The optimal design is guided by the physical constraints of the system for selecting the optimal weighting matrices. The plant model is complemented by augmenting appropriate disturbance models. The compensation of the force-field nonlinearities is proposed for decreasing the uncertainty of the actuator. A disturbance-observer-based unbalance compensation for canceling the magnetic force vibrations or vibrations in the measured positions is presented. The theoretical studies are verified by the practical experiments utilizing a custom-built laboratory test rig. The test rig uses a prototyping control platform developed in the scope of this work. To sum up, the work makes a step in

  12. Advantage and limitations of a minimally-invasive approach and early weight bearing in the treatment of tibial shaft fractures with locking plates.

    Science.gov (United States)

    Adam, P; Bonnomet, F; Ehlinger, M

    2012-09-01

    Intramedullary nailing is a common method of treating tibial shaft fractures. However, precise control of reduction at the proximal and distal quarters is difficult to achieve. The purpose of this study was to assess the results of plating using locking screws and the feasibility of a minimally-invasive approach. All patients with tibial shaft fracture treated by means of locking plates from January 2004 to October 2006. Thirty-two fractures were treated in 32 patients with a mean age of 43.8 years. Internal fixation with a locking plate and screw construct, using a minimally-invasive or standard approach. Surgical approach, time to weight bearing, complications and their type, time to bone union, alignment in the frontal and sagittal planes on anteroposterior and lateral radiographs. The minimally-invasive approach was performed in 28 cases and immediate full weight bearing allowed in 25 cases. At a mean follow-up of 27 months, two patients had died and two patients were lost to follow-up. The mean time to bone union was 9.1 weeks. Four cases had a complicated course: one infection, one compartment syndrome, one hardware breakage and one pseudarthrosis. Six cases ended up with valgus malunion exceeding 5° in the frontal plane, already present at the time of surgery. Where a minimally-invasive approach can be performed, immediate pain-free weight bearing can be allowed without further displacement at follow-up. The observed rate of malunion underlines the need for adequate reduction and shows that the rationale for success does not solely depend on the plate anatomic design but also on the skills of the operating surgeon. Level I university regional hospital Cohort study. Copyright © 2012. Published by Elsevier Masson SAS.

  13. An electric motor with magnetic bearings: A concept

    Science.gov (United States)

    Studer, P. A.

    1973-01-01

    Because same magnetic flux is used to control rotor as to drive it, size, weight, and power required are minimized. Constant total current keeps motor torque invarient, and absence of mechanical bearings eliminates wear and reduces frictional power loss.

  14. Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient’s and Physical Therapist’s Perspective

    Science.gov (United States)

    van Lieshout, Remko; Pisters, Martijn F.; Vanwanseele, Benedicte; de Bie, Rob A.; Wouters, Eveline J.; Stukstette, Mirelle J.

    2016-01-01

    Background Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient’s compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user’s perspective. Aim To describe the usability from the physical therapists’ and a patients’ perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. Methods In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Results Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. Conclusion This study gives insight in the usability of two biofeedback devices from the patient’s and physical therapist’s perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the

  15. Resistance exercise attenuates skeletal muscle oxidative stress, systemic pro-inflammatory state, and cachexia in Walker-256 tumor-bearing rats.

    Science.gov (United States)

    Padilha, Camila Souza; Borges, Fernando Henrique; Costa Mendes da Silva, Lilian Eslaine; Frajacomo, Fernando Tadeu Trevisan; Jordao, Alceu Afonso; Duarte, José Alberto; Cecchini, Rubens; Guarnier, Flávia Alessandra; Deminice, Rafael

    2017-09-01

    The aim of this study was to investigate the effects of resistance exercise training (RET) on oxidative stress, systemic inflammatory markers, and muscle wasting in Walker-256 tumor-bearing rats. Male (Wistar) rats were divided into 4 groups: sedentary controls (n = 9), tumor-bearing (n = 9), exercised (n = 9), and tumor-bearing exercised (n = 10). Exercised and tumor-bearing exercised rats were exposed to resistance exercise of climbing a ladder apparatus with weights tied to their tails for 6 weeks. The physical activity of control and tumor-bearing rats was confined to the space of the cage. After this period, tumor-bearing and tumor-bearing exercised animals were inoculated subcutaneously with Walker-256 tumor cells (11.0 × 10 7 cells in 0.5 mL of phosphate-buffered saline) while control and exercised rats were injected with vehicle. Following inoculation, rats maintained resistance exercise training (exercised and tumor-bearing exercised) or sedentary behavior (control and tumor-bearing) for 12 more days, after which they were euthanized. Results showed muscle wasting in the tumor-bearing group, with body weight loss, increased systemic leukocytes, and inflammatory interleukins as well as muscular oxidative stress and reduced mTOR signaling. In contrast, RET in the tumor-bearing exercised group was able to mitigate the reduced body weight and muscle wasting with the attenuation of muscle oxidative stress and systemic inflammatory markers. RET also prevented loss of muscle strength associated with tumor development. RET, however, did not prevent the muscle proteolysis signaling via FBXO32 gene messenger RNA expression in the tumor-bearing group. In conclusion, RET performed prior tumor implantation prevents cachexia development by attenuating tumor-induced systemic pro-inflammatory condition with muscle oxidative stress and muscle damage.

  16. Control of Surge in Centrifugal Compressors by Active Magnetic Bearings Theory and Implementation

    CERN Document Server

    Yoon, Se Young; Allaire, Paul E

    2013-01-01

    Control of Surge in Centrifugal Compressors by Active Magnetic Bearings sets out the fundamentals of integrating the active magnetic bearing (AMB) rotor suspension technology in compressor systems, and describes how this relatively new bearing technology can be employed in the active control of compressor surge. The authors provide a self-contained and comprehensive review of rotordynamics and the fundamentals of the AMB technology. The active stabilization of compressor surge employing AMBs in a machine is fully explored, from the modeling of the instability and the design of feedback controllers, to the implementation and experimental testing of the control algorithms in a specially-constructed, industrial-size centrifugal compression system. The results of these tests demonstrate the great potential of the new surge control method developed in this text. This book will be useful for engineers in industries that involve turbocompressors and magnetic bearings, as well as for researchers and graduate students...

  17. Recurrence of Hallux Valgus Can Be Predicted from Immediate Postoperative Non-Weight-Bearing Radiographs.

    Science.gov (United States)

    Park, Chul Hyun; Lee, Woo-Chun

    2017-07-19

    The aims of this study were to identify risk factors for the recurrence of hallux valgus deformity and to clarify whether recurrence after surgery to treat hallux valgus can be predicted using radiographic parameters assessed on immediate postoperative non-weight-bearing radiographs. A proximal chevron osteotomy combined with a distal soft-tissue procedure was performed by a single surgeon to treat moderate to severe hallux valgus deformity in 93 patients (117 feet). The feet were grouped according to nonrecurrence or recurrence. Changes in the hallux valgus angle, the intermetatarsal angle, and sesamoid position over time were analyzed by comparing values measured during each postoperative period. The relative risks of recurrence as indicated by preoperative and postoperative radiographic parameters were determined. Twenty (17.1%) of the 117 feet showed hallux valgus recurrence at the time of the last follow-up. The hallux valgus angle and the intermetatarsal angle stabilized at 6 months after surgery in the nonrecurrence group. An immediate postoperative hallux valgus angle of ≥8°, an immediate postoperative sesamoid position of grade 4 or greater, a preoperative metatarsus adductus angle of ≥23°, and a preoperative hallux valgus angle of ≥40° were significantly associated with recurrence. Recurrence of hallux valgus after a proximal chevron osteotomy can be reliably predicted from immediate postoperative non-weight-bearing radiographs. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

  18. Body weight perception and body weight control behaviors in adolescents

    OpenAIRE

    Frank, Robson; Claumann, Gaia S.; Felden, Érico P.G.; Silva, Diego A.S.; Pelegrini, Andreia

    2018-01-01

    Abstract Objective: To investigate the association between the perception of body weight (as above or below the desired) and behaviors for body weight control in adolescents. Methods: This was a cross-sectional study that included 1051 adolescents (aged 15-19 years) who were high school students attending public schools. The authors collected information on the perception of body weight (dependent variable), weight control behaviors (initiative to change the weight, physical exercise, eatin...

  19. Gender differences in tibio-femoral kinematics and quadriceps muscle force during weight-bearing knee flexion in vitro.

    Science.gov (United States)

    Wünschel, Markus; Wülker, Nikolaus; Müller, Otto

    2013-11-01

    Females have a higher risk in terms of anterior cruciate ligament injuries during sports than males. Reasons for this fact may be different anatomy and muscle recruitment patterns leading to less protection for the cruciate- and collateral-ligaments. This in vitro study aims to evaluate gender differences in knee joint kinematics and muscle force during weight-bearing knee flexions. Thirty-four human knee specimens (17 females/17 males) were mounted on a dynamic knee simulator. Weight-bearing single-leg knee flexions were performed with different amounts of simulated body weight (BW). Gender-specific kinematics was measured with an ultrasonic motion capture system and different loading conditions were examined. Knee joint kinematics did not show significant differences regarding anteroposterior and medial-lateral movement as well as tibial varus-valgus and internal-external rotation. This applied to all simulated amounts of BW. Simulating 100 N BW in contrast to AF50 led to a significant higher quadriceps overall force in female knees from 45° to 85° of flexion in contrast to BW 50 N. In these female specimens, the quadriceps overall force was about 20 % higher than in male knees being constant in higher flexion angles. It is indicated by our results that in a squatting movement females compared with males produce higher muscle forces, suggesting an increased demand for muscular stabilization, whereas tibio-femoral kinematics was similar for both genders.

  20. 49 CFR 229.69 - Side bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Side bearings. 229.69 Section 229.69....69 Side bearings. (a) Friction side bearings with springs designed to carry weight may not have more than 25 percent of the springs in any one nest broken. (b) Friction side bearings may not be run in...

  1. MATHEMATICAL AND COMPUTER MODELING OF AUTOMATIC CONTROL SYSTEM FOR HYDROSTATIC BEARING

    Directory of Open Access Journals (Sweden)

    N. A. Pelevin

    2016-09-01

    Full Text Available The paper presents simulation results of hydrostatic bearing dynamics in spindle assembly of standard flexible production module with throttled circuit. The necessity of dynamic quality increase for automatic control system of the hydrostatic bearing with the use of correcting means in the form of RC-chains is shown. The features of correction parameters choice coming from the existence of the crossing connections in automatic control system structure are noted. We propose the block diagram of automatic control system of the hydrostatic bearing in Simulink working field and cyclic algorithm for determination program of RC-chain parameters implemented in MATLAB taking into account typical thermal processes for the finishing treatment. Graphic-analytical method for the correction parameters choice is presented based on the stability stock phase gradient for dynamic quality determination of automatic control system. Researches of the method estimability in case of using the standard metal bellow valve as the hydrocapacity for RC-chain are also carried out. Recommendations for the bellow valve choice are formulated. The check of dynamic quality indicators concerning transition processes calculated by means of the appropriate programs developed for MATLAB is performed. Examples are given for phase stability factor gradient schedules with partition of various areas of hydrostatic bearing dynamic quality for different frequencies of spindle rotation and procedure description of data cursor function application on MATLAB toolbar. Improvement of hydrostatic bearing dynamics under typical low loadings for finishing treatment is noted. Also, decrease of dynamic indicators for high loadings treatment in case of roughing treatment is marked.

  2. A One-Axis-Controlled Magnetic Bearing and Its Performance

    Science.gov (United States)

    Li, Lichuan; Shinshi, Tadahiko; Kuroki, Jiro; Shimokohbe, Akira

    Magnetic bearings (MBs) are complex machines in which sensors and controllers must be used to stabilize the rotor. A standard MB requires active control of five motion axes, imposing significant complexity and high cost. In this paper we report a very simple MB and its experimental testing. In this MB, the rotor is stabilized by active control of only one motion axis. The other four motion axes are passively stabilized by permanent magnets and appropriate magnetic circuit design. In rotor radial translational motion, which is passively stabilized, a resonant frequency of 205Hz is achieved for a rotor mass of 11.5×10-3kg. This MB features virtually zero control current and zero rotor iron loss (hysteresis and eddy current losses). Although the rotational speed and accuracy are limited by the resonance of passively stabilized axes, the MB is still suitable for applications where cost is critical but performance is not, such as cooling fans and auxiliary support for aerodynamic bearings.

  3. LIGHT-WEIGHT LOAD-BEARING STRUCTURES REINFORCED BY CORE ELEMENTS MADE OF SEGMENTS AND A METHOD OF CASTING SUCH STRUCTURES

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure, reinforced by core elements (2) of a strong material constituting one or more compression or tension zones in the structure to be cast, which core (2) is surrounded by or adjacent to a material of less strength compared to the core (2......), where the core (2) is constructed from segments (1) of core elements (2) assembled by means of one or more prestressing elements (4). The invention further relates to a method of casting of light-weight load-bearing structures, reinforced by core elements (2) of a strong material constituting one...... or more compression or tension zones in the structure to be cast, which core (2) is surrounded by or adjacent to a material of less strength compared to the core (2), where the core (2) is constructed from segments (1) of core elements (2) assembled and hold together by means of one or more prestressing...

  4. Linear and Non-Linear Control Techniques Applied to Actively Lubricated Journal Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2003-01-01

    The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication. For furt......The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication....... For further reduction of shaft vibrations one can count with the active lubrication action, which is based on injecting pressurised oil into the bearing gap through orifices machined in the bearing sliding surface. The design and efficiency of some linear (PD, PI and PID) and non-linear controllers, applied...... vibration reduction of unbalance response of a rigid rotor, where the PD and the non-linear P controllers show better performance for the frequency range of study (0 to 80 Hz). The feasibility of eliminating rotor-bearing instabilities (phenomena of whirl) by using active lubrication is also investigated...

  5. Effects of spine loading in a patient with post-decompression lumbar disc herniation: observations using an open weight-bearing MRI.

    Science.gov (United States)

    Mahato, Niladri Kumar; Sybert, Daryl; Law, Tim; Clark, Brian

    2017-05-01

    Our objective was to use an open weight-bearing MRI to identify the effects of different loading conditions on the inter-vertebral anatomy of the lumbar spine in a post-discectomy recurrent lumbar disc herniation patient. A 43-year-old male with a left-sided L5-S1 post-decompression re-herniation underwent MR imaging in three spine-loading conditions: (1) supine, (2) weight-bearing on standing (WB), and (3) WB with 10 % of body mass axial loading (WB + AL) (5 % through each shoulder). A segmentation-based proprietary software was used to calculate and compare linear dimensions, angles and cross sections across the lumbar spine. The L5 vertebrae showed a 4.6 mm posterior shift at L5-S1 in the supine position that changed to an anterior translation >2.0 mm on WB. The spinal canal sagittal thickness at L5-S1 reduced from supine to WB and WB + AL (13.4, 10.6, 9.5 mm) with corresponding increases of 2.4 and 3.5 mm in the L5-S1 disc protrusion with WB and WB + AL, respectively. Change from supine to WB and WB + AL altered the L5-S1 disc heights (10.2, 8.6, 7.0 mm), left L5-S1 foramen heights (12.9, 11.8, 10.9 mm), L5-S1 segmental angles (10.3°, 2.8°, 4.3°), sacral angles (38.5°, 38.3°, 40.3°), L1-L3-L5 angles (161.4°, 157.1°, 155.1°), and the dural sac cross sectional areas (149, 130, 131 mm 2 ). Notably, the adjacent L4-L5 segment demonstrated a retro-listhesis >2.3 mm on WB. We observed that with weight-bearing, measurements indicative of spinal canal narrowing could be detected. These findings suggest that further research is warranted to determine the potential utility of weight-bearing MRI in clinical decision-making.

  6. Weight control behaviors of highly successful weight loss maintainers: the Portuguese Weight Control Registry.

    Science.gov (United States)

    Santos, Inês; Vieira, Paulo N; Silva, Marlene N; Sardinha, Luís B; Teixeira, Pedro J

    2017-04-01

    To describe key behaviors reported by participants in the Portuguese Weight Control Registry and to determine associations between these behaviors and weight loss maintenance. A total of 388 adults participated in this cross-sectional study. Assessments included demographic information, weight history, weight loss and weight maintenance strategies, dietary intake, and physical activity. Participants lost on average 18 kg, which they had maintained for ~28 months. Their average dietary intake was 2199 kcal/day, with 33 % of energy coming from fat. About 78 % of participants engaged in levels of moderate-plus-vigorous physical activity exceeding 150 min/week (51 % above 250 min/week), with men accumulating 82 more minutes than women (p breakfast. Greater weight loss maintenance was associated with higher levels of physical activity, walking, weight self-monitoring, establishing specific goals, and with reduced portion size use, reduced consumption of carbohydrates, and increased consumption of protein, (p < 0.05). Results indicate that weight loss maintenance is possible through the adoption of a nutritionally-balanced diet and regular participation in physical activity, but also suggest that adopting different (and, to a degree, individualized) set of behavioral strategies is key for achieving success.

  7. A control method of the rotor re-levitation for different orbit responses during touchdowns in active magnetic bearings

    Science.gov (United States)

    Lyu, Mindong; Liu, Tao; Wang, Zixi; Yan, Shaoze; Jia, Xiaohong; Wang, Yuming

    2018-05-01

    Touchdown can make active magnetic bearings (AMB) unable to work, and bring severe damages to touchdown bearings (TDB). To resolve it, we presents a novel re-levitation method consisting of two operations, i.e., orbit response recognition and rotor re-levitation. In the operation of orbit response recognition, the three orbit responses (pendulum vibration, combined rub and bouncing, and full rub) can be identified by the expectation of radial displacement of rotor and expectation of instantaneous frequency (IF) of rotor motion in the sampling period. In the rotor re-levitation operation, a decentralized PID control algorithm is employed for pendulum vibration and combined rub and bouncing, and the decentralized PID control algorithm and another whirl damping algorithm, in which the weighting factor is determined by the whirl frequency, are jointly executed for the full rub. The method has been demonstrated by the simulation results of an AMB model. The results reveal that the method is effective in actively suppressing the whirl motion and promptly re-levitating the rotor. As the PID control algorithm and the simple operations of signal processing are employed, the algorithm has a low computation intensity, which makes it more easily realized in practical applications.

  8. Change in body weight of mothers and neonates and in milk composition during denning period in captive Japanese black bears (Ursus thibetanus japonicus).

    Science.gov (United States)

    Iibuchi, Ruriko; Nakano, Noriko; Nakamura, Tadashi; Urashima, Tadasu; Shimozuru, Michito; Murase, Tetsuma; Tsubota, Toshio

    2009-05-01

    Japanese black bears, Ursus thibetanus japonicus, have been classified as a vulnerable species so that data on reproduction are needed to maintain and/or extend their population. They are known to have a peculiar style of reproduction, giving birth to their neonates and raising them during denning, a period of complete fasting. In this study, we investigated the metabolic rate and milk composition of mother bears raising neonates, and the changes in body weight of the neonates under captive conditions. Seven female bears kept in dens were weighed once a month, and the amount of energy they used was calculated. From birth, cubs were also weighed and their growth rate was determined. In addition, the milk composition was analyzed to investigate its characteristics. As a result, it was found that mother bears used 34% more energy than did solitary females. There was no significant difference in the energy used for nursing whether they had single or twin cubs. On the other hand, the body weight gain of single cubs was significantly higher than that of twin cubs, suggesting that the growth of the cubs was highly affected by the suppression of mother's energy consumption during the fasting period. The milk had high fat and low sugar concentrations. This indicates that mother bears used the fat accumulated prior to denning for their main energy source when raising cubs. Considering all results together, Japanese black bears showed remarkable efficiency in the use of energy for reproduction during the fasting period.

  9. Performance Improvement of tilting-pad journal bearings by means of controllable lubrication

    DEFF Research Database (Denmark)

    Cerda, Alejandro; Santos, Ilmar

    2012-01-01

    Tilting-Pad Journal Bearings (TPJB) are commonly used on high-performance turbomachinery due to their excellent stability properties at high speed when compared to other designs for oil film bearings. Hence, efforts have been made to improve the accuracy for the available models for these mechani...... is used to show the benefits of applying a controllable lubrication regime, by means of the modification of the thermal and dynamic behaviour of the bearing....

  10. Advanced Control of Active Bearings - Modelling, Design and Experiments

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane

    In all rotating machines relative movements between the stationary parts and the rotating parts imply energy loss and, in many critical cases, vibration problems. This energy loss leads to higher overall energy consumption of the system. Research activities towards the reduction of friction......, the enhancement of damping, the extension of operating range and the minimisation of critical vibrations in machine elements are of fundamental importance. The main component to tackle the energy-loss-related problems is the bearing. The area of design of active bearings, while very promising, is still in its...... the critical speeds. The feedback control law is preferably designed from a simple model, which captures the dominant dynamics of the machine in the frequency range of interest. This thesis offers two main original contributions in the field of active bearings. First, an experimental technique is proposed...

  11. Big bearings. Unsung hero; Kyodaina jikuuke. Hitome ni tsukanai hatarakimono

    Energy Technology Data Exchange (ETDEWEB)

    Nanba, S. [Koyo Seiko Co. Ltd., Osaka (Japan)

    1997-03-05

    This paper introduces examples of the use of big bearings. Bearings are divided largely into those used for radial load supporting and those used for thrust load supporting, while big bearings are often used for the latter usage. Thrust bearings include a cutter heat supporting bearing for tunnel excavator working underground, in addition to those used for swing motion of parabolic antennas and tower cranes. A bearing used in an excavator has an outer diameter of about half that of the excavator. The outer diameter of a shielding machine practically used in tunnel drilling currently has an outer diameter of 14,140 mm, and the outer diameter of the bearing is 7200 mm (bearing weighing 45 tons). Other big thrust bearings may include a swing tower swinging thrust bearing used in a continuous casting facility. Big radial bearings are used in iron and steel making facilities. This paper describes two examples of bearings used in this application. A spherical roller bearing to support converter trunion should be of an ultra big size to withstand total weight of about 1400 tons composed of a converter weight and weight of steel to be processed. A four-row cylindrical roller bearing to support the backup roll of a thick plate rolling mill is a bearing with durability against large loads to support reduction rolls whose size have become increasingly large. 2 refs., 5 figs.

  12. Weight loss maintenance in relation to locus of control: The MedWeight study.

    Science.gov (United States)

    Anastasiou, Costas A; Fappa, Evaggelia; Karfopoulou, Eleni; Gkza, Anastasia; Yannakoulia, Mary

    2015-08-01

    Locus of control, i.e. the degree of an individual's belief on the control of his/her life, has been related to many health outcomes, including weight loss in overweight/obese individuals. No information is available on the impact of locus of control in maintaining weight loss. We aimed to investigate the effect of locus of control in weight loss maintenance and explore potential associations with lifestyle factors. Study participants included 239 individuals (41% males) who had lost at least 10% of body weight in the past and either maintained the loss (maintainers: weight maintenance of at least 10% of initial weight) or regained it (regainers). Locus of control was defined by a relevant multi-dimensional scale; participants were categorised to internals and externals, based on "internal" and "others" sub-scales. A significant interaction was found between locus of control and weight loss maintenance status (p locus of control. Individualised treatment, according to locus of control, may increase weight loss maintenance rates in former overweight/obese individuals. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Missile rolling tail brake torque system. [simulating bearing friction on canard controlled missiles

    Science.gov (United States)

    Davis, W. T. (Inventor)

    1984-01-01

    Apparatus for simulating varying levels of friction in the bearings of a free rolling tail afterbody on a canard-controlled missile to determine friction effects on aerodynamic control characteristics is described. A ring located between the missile body and the afterbody is utilized in a servo system to create varying levels of friction between the missile body and the afterbody to simulate bearing friction.

  14. Ideal Timing of Starting Weight-Bearing After Calcaneal Insufficiency Fracture: A Case Report and Review of the Literature

    OpenAIRE

    Imamura; Mochizuki; Kawakami; Momohara

    2016-01-01

    Introduction Criteria for starting weight-bearing on the heel with a symptomatic calcaneal insufficiency fracture have not yet been reported. Case Presentation We describe a rare case of a 52-year-old woman with a calcaneal insufficiency fracture who sustained a second ipsilateral calcaneal insufficiency fracture within a short time span. The initial fracture was not evident radiographically, but was detected using magnetic resona...

  15. ELEMENT DESIGN FOR AN INKJET SYSTEM OF HYDROSTATIC GAS BEARING CONTROL

    Directory of Open Access Journals (Sweden)

    T. E. Il'ina

    2015-09-01

    Full Text Available Subject of Study. The paper discusses the concept of inkjet systems application, also known as pneumonics, for automatic hydrostatic gas bearing control. Inkjet systems have the advantages over traditional control systems in those problems where the speed of traditional mechanical, electrical or hydraulic servomotors is not enough. Control of the shaft position in gas bearing with forced gas supply into the gap between the shaft and the bearing is typical for this class of problems. In this case, control means the pressure changing or flow rate of gas supplied to the gap by at least one of three axes at a frequency higher than the nominal speed of the shaft. Thus, high speed of response is required from the system. The objective of this work is to design a discrete jet element, testing of its geometry and switching characteristics. Main Results. The discrete inkjet element for oil-free non-contact transmission working on the refrigerant was designed. Relay transition process was modeled in the inkjet element with the use of numerical methods. The switching time has reached 0.2-0.3 ms; this is one order less than the requirements of aircraft control systems, which typically operate at a frequency of about 200 Hz. It is shown that periodic oscillations with high frequency occur when the control signal is injected with insufficient level of pressure. Therefore, a separate design task is to determine the minimum pressure allowable in the control channel.

  16. Frequency-Weighted Balancing Related Controller Reduction

    OpenAIRE

    Varga, Andras; Anderson, Brian D.O.

    2002-01-01

    The efficient solution of a class of controller approximation problems by using frequency-weighted balancing related model reduction approaches is considered. It is shown that for certain standard performance and stability enforcing frequency-weights, the computation of the frequency-weighted controllability and observability grammians can be done by solving reduced order Lyapunov equations regardless the controller itself is stable or unstable. The new approach can be used in conjunction wit...

  17. Hypolocomotion, asymmetrically directed behaviors (licking, lifting, flinching, and shaking and dynamic weight bearing (gait changes are not measures of neuropathic pain in mice

    Directory of Open Access Journals (Sweden)

    Schorscher-Petcu Ara

    2010-06-01

    Full Text Available Abstract Background Spontaneous (non-evoked pain is a major clinical symptom of neuropathic syndromes, one that is understudied in basic pain research for practical reasons and because of a lack of consensus over precisely which behaviors reflect spontaneous pain in laboratory animals. It is commonly asserted that rodents experiencing pain in a hind limb exhibit hypolocomotion and decreased rearing, engage in both reflexive and organized limb directed behaviors, and avoid supporting their body weight on the affected side. Furthermore, it is assumed that the extent of these positive or negative behaviors can be used as a dependent measure of spontaneous chronic pain severity in such animals. In the present study, we tested these assumptions via blinded, systematic observation of digital video of mice with nerve injuries (chronic constriction or spared nerve injury, and automated assessment of locomotor behavior using photocell detection and dynamic weight bearing (i.e., gait using the CatWalk® system. Results We found no deficits in locomotor activity or rearing associated with neuropathic injury. The frequency of asymmetric (ipsilaterally directed behaviors were too rare to be seriously considered as representing spontaneous pain, and in any case did not statistically exceed what was blindly observed on the contralateral hind paw and in control (sham operated and unoperated mice. Changes in dynamic weight bearing, on the other hand, were robust and ipsilateral after spared nerve injury (but not chronic constriction injury. However, we observed timing, pharmacological, and genetic dissociation of mechanical allodynia and gait alterations. Conclusions We conclude that spontaneous neuropathic pain in mice cannot be assessed using any of these measures, and thus caution is warranted in making such assertions.

  18. Effect of psychological distress on weight concern and weight control behaviors.

    Science.gov (United States)

    Roohafza, Hamidreza; Kabir, Ali; Sadeghi, Masoumeh; Shokouh, Pedram; Aalaei-Andabili, Seyed Hossein; Mehrabi, Yadollah; Sarrafzadegan, Nizal

    2014-09-01

    Obesity is associated with chronic disorders like coronary artery diseases, metabolic syndrome, cancers, and psychiatric disorders. Stress may contribute to weight gain by disrupting weight concern, and lead to uncontrolled eating behavior. This study aimed to investigate the effects of stress on weight concern and control behaviors in normal weight and obese adults. A total of 9544 subjects were selected by multi-stage random sampling from three provinces in central Iran. Information related to weight concern and control behavior was registered in normal weight and obese participants. Psychological distress was measured by a 12-item General Health Questionnaire (GHQ-12) and subjects were divided into high and low stress groups. Logistic regression was used for analysis. The mean age of participants was 38.7 ± 15.5 years and 50% (4772) of them were males. The adjusted odds ratio (OR) for age, sex and education of high stress to low stress level for weight concern, weight control behavior and acceptable physical activity behavior was more than 1; but the OR was less than 1 for waist circumference, obesity and healthy diet behavior. Among obese participants, higher levels of stress were associated with lower weight concern with OR, 95%CI: 0.821, (0.682 - 0.988), lower acceptable physical activity with OR = 0.833, 95%CI: (0.624 - 0.912), but higher rates of healthy diet behavior with OR = 1.360, 95% CI: (1.040 - 1.780). Individuals with high stress level have lower weight concern and lower physical activity; therefore, they are prone to weight gain and obesity. It could be concluded that stress management should be considered as a crucial component of obesity prevention and control programs.

  19. Fiducial marker-based correction for involuntary motion in weight-bearing C-arm CT scanning of knees. II. Experiment

    International Nuclear Information System (INIS)

    Choi, Jang-Hwan; Maier, Andreas; Keil, Andreas; McWalter, Emily J.; Gold, Garry E.; Fahrig, Rebecca; Pal, Saikat; Beaupré, Gary S.

    2014-01-01

    warping improved the SSIM in the central slice by 20.22%, 16.83%, and 25.77% in the data with the largest motion among the five datasets (SCAN5); improvement in off-center slices was 18.94%, 29.14%, and 36.08%, respectively. Conclusions: The authors showed that C-arm CT control can be implemented for nonstandard horizontal trajectories which enabled us to scan and successfully reconstruct both legs of volunteers in weight-bearing positions. As predicted using theoretical models, the proposed motion correction methods improved image quality by reducing motion artifacts in reconstructions; 3D warping performed better than the 2D methods, especially in off-center slices

  20. Roles of superconducting magnetic bearings and active magnetic bearings in attitude control and energy storage flywheel

    International Nuclear Information System (INIS)

    Tang Jiqiang; Fang Jiancheng; Ge, Shuzhi Sam

    2012-01-01

    Compared with conventional energy storage flywheel, the rotor of attitude control and energy storage flywheel (ACESF) used in space not only has high speed, but also is required to have precise and stable direction. For the presented superconducting magnetic bearing (SMB) and active magnetic bearing (AMB) suspended ACESF, the rotor model including gyroscopic couples is established originally by taking the properties of SMB and AMB into account, the forces of SMB and AMB are simplified by linearization within their own neighbors of equilibrium points. For the high-speed rigid discal rotor with large inertia, the negative effect of gyroscopic effect of rotor is prominent, the radial translation and tilting movement of rotor suspended by only SMB, SMB with equivalent PMB, or SMB together with PD controlled AMB are researched individually. These analysis results proved originally that SMB together with AMB can make the rotor be stable and make the radial amplitude of the vibration of rotor be small while the translation of rotor suspended by only SMB or SMB and PM is not stable and the amplitude of this vibration is large. For the stability of the high-speed rotor in superconducting ACESF, the AMB can suppress the nutation and precession of rotor effectively by cross-feedback control based on the separated PD type control or by other modern control methods.

  1. A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring

    Science.gov (United States)

    Kerst, Stijn; Shyrokau, Barys; Holweg, Edward

    2018-05-01

    This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.

  2. Peri-Conceptional undernutrition in twin bearing ewes: Eect on early fetal growth and birth weight / Desnutrición peri-concepcional en ovejas con gestación gemelar: Efecto sobre el crecimiento fetal temprano y peso al nacimiento

    Directory of Open Access Journals (Sweden)

    Ricardo Vicente Pérez

    2017-09-01

    Full Text Available A total of 48 Katahdin x Pelibuey multiparous ewes were used to evaluate the eect of nutritional restriction (40 % before (30 d, RT, after (50 d, TR or both periods (80 d, RR compared with a control group on maternal body status, early fetal growth and lamb birth weights. Only twin bearing ewes were selected at d 50 of pregnancy for fetal measurements by ultrasonography and record of birth weight. Compared with control ewes, lower (p < 0.05 weight and body condition score had RT and RR ewes at mating time, likewise, TR and RR ewes at d 50 post-conception. There were mainly dierences between fetuses from control and RT ewes, being higher (p < 0.05 the vesicular, abdominal and fetal area, as well as crown-rump length and birth weight for RT fetuses. In conclusion, preconception undernutrition positively altered the early fetal growth and lamb birth weights in hair ewes pregnant with twins

  3. Nonlinear Control of an Active Magnetic Bearing System Achieved Using a Fuzzy Control with Radial Basis Function Neural Network

    Directory of Open Access Journals (Sweden)

    Seng-Chi Chen

    2014-01-01

    Full Text Available Studies on active magnetic bearing (AMB systems are increasing in popularity and practical applications. Magnetic bearings cause less noise, friction, and vibration than the conventional mechanical bearings; however, the control of AMB systems requires further investigation. The magnetic force has a highly nonlinear relation to the control current and the air gap. This paper proposes an intelligent control method for positioning an AMB system that uses a neural fuzzy controller (NFC. The mathematical model of an AMB system comprises identification followed by collection of information from this system. A fuzzy logic controller (FLC, the parameters of which are adjusted using a radial basis function neural network (RBFNN, is applied to the unbalanced vibration in an AMB system. The AMB system exhibited a satisfactory control performance, with low overshoot, and produced improved transient and steady-state responses under various operating conditions. The NFC has been verified on a prototype AMB system. The proposed controller can be feasibly applied to AMB systems exposed to various external disturbances; demonstrating the effectiveness of the NFC with self-learning and self-improving capacities is proven.

  4. The construction design of ball bearings used in the control rod driving mechanisms of PWRs

    International Nuclear Information System (INIS)

    Leng Chengmu; Huang Chongming; Chen Jianting.

    1986-01-01

    According to the operation conditions of ball bearings used in the control rod driving mechanisms of PWRs, this paper has analysed and discussed the problems that must be taken into account in the construction design of this ball bearing. It includes: a discussion about the reasonable selection of construction parameters of the bearing, deduction of the relationship between bearing clearance and contact angle, and the emphasis on the significance of assembling accuracy and torque measurement in the assurance of operational performance of the bearings. These experiences may be somewhat valuable for the design and application of this kind of ball bearing

  5. Weight-Bearing Exercise and Foot Health in Native Americans.

    Science.gov (United States)

    Cuaderes, Elena; DeShea, Lise; Lamb, W Lyndon

    2014-12-01

    Diabetes contributes to sensory peripheral neuropathy, which has been linked to lower limb abnormalities that raise the risk for foot ulcers and amputations. Because amputations are a reason for pain and hospitalization in those with diabetes, it is of critical importance to gain insight about prevention of ulcer development in this population. Although the American Diabetes Association (ADA) now recommends that individuals with neuropathy can engage in moderate-intensity weight-bearing activity (WBA), they must wear appropriate footwear and inspect their feet daily. The physical forces and inflammatory processes from WBA may contribute to plantar characteristics that lead to ulcers. The purpose of this study was to compare neuropathic status and foot characteristics in Native Americans according to WBA classification. The t tests for unequal sample sizes found that exercisers had more difficulty sensing baseline temperature than nonexercisers, except at the right foot (all p values Exercisers demonstrated higher surface skin temperature gradients at the first metatarsal head, a plantar site where wounds tend to form. The more consistently exercisers performed, the higher the plan-tar pressures were at the right second ( r = .24, p = .02) and third metatarsal heads ( r = .26, p = .01). Findings from this investigation do not refute current ADA recommendations and further intervention studies are needed that are longitudinal and measures WBA more accurately.

  6. Bearings for the HFIR control plates

    International Nuclear Information System (INIS)

    Abbatiello, A.A.

    1975-08-01

    Recent accelerated wear of HFIR bearings seems to be a more advanced stage of the situation encountered in 1967. The latest observations are in agreement with the hypothesis that high-frequency impact loads at a 30 0 angle on these bearings are the apparent basic cause of their short life. In view of the limited possibilities for change at this stage of HFIR operation, the region of best payoff seems to be an increase in the load-carrying area at some acceptable sacrifice of low rolling friction. On this basis three types of bearings are proposed for test--two of these are journal types and one is a slider type. The next planned shutdown for major parts replacement provides an opportunity to test these modified bearing types in the HFIR under full mechanical operating conditions but without nuclear operation. The program is recommended for consideration and adoption. (U.S.)

  7. Early weight-bearing after periacetabular osteotomy leads to a high incidence of postoperative pelvic fractures.

    Science.gov (United States)

    Ito, Hiroshi; Tanino, Hiromasa; Sato, Tatsuya; Nishida, Yasuhiro; Matsuno, Takeo

    2014-07-11

    It has not been shown whether accelerated rehabilitation following periacetabular osteotomy (PAO) is effective for early recovery. The purpose of this retrospective study was to compare complication rates in patients with standard and accelerated rehabilitation protocols who underwent PAO. Between January 2002 and August 2011, patients with a lateral center-edge (CE) angle of rehabilitation protocol. In 65 patients (76 hips) with the accelerated rehabilitation protocol, postoperative strengthening of the hip, thigh and core musculature was begun on the day of surgery as tolerated. The exercise program included active hip range of motion, and gentle isometric hamstring and quadriceps muscle sets; these exercises were performed for 30 minutes in the morning and 30 minutes in the afternoon with a physical therapist every weekday for 6 weeks. Full weight-bearing with two axillary crutches started on the day of surgery as tolerated. Complications were evaluated for 2 years. The clinical results at the time of follow-up were similar in the two groups. The average periods between the osteotomy and full-weight-bearing walking without support were 4.2 months and 6.9 months in patients with the accelerated and standard rehabilitation protocols (P rehabilitation protocol could achieve earlier recovery of patients. However, postoperative fractures of the ischial ramus and posterior column of the pelvis were more frequently found in patients with the accelerated rehabilitation protocol (8/76) than in those with the standard rehabilitation protocol (1/80) (P = 0.013). The accelerated rehabilitation protocol seems to have advantages for early muscle recovery in patients undergoing PAO; however, postoperative pelvic fracture rates were unacceptably high in patients with this protocol.

  8. Rolling bearings control by comparing the wavelet of scaling ...

    African Journals Online (AJOL)

    The method for bearing monitoring is proposed, which makes it possible to automate the process of defect detection and to increase the resolving power during vibrationacoustic control performance. The result of the study showed that the application of analysis algorithms with the use of wavelet transformation allows to ...

  9. On the future of controllable fluid film bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    lubrication regimes, i.e., as tilting-pad journal bearings, multi-recess journal bearings and plain journal bearings. After a comprehensive overview of the theoretical and experimental technological advancements achieved in university laboratories, the feasibility of industrial applications is highlighted......This work gives an overview of the theoretical and experimental achievements of mechatronics applied to fluid film bearings. Compressible and uncompressible fluids are addressed. Rigid and elastic (deformable) bearing profiles are investigated. Hydraulic, pneumatic, magnetic and piezoelectric...

  10. Steady state characteristics of a tilting pad journal bearing with controllable lubrication: Comparison between theoretical and experimental results

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; Nielsen, Bo Bjerregaard; Santos, Ilmar

    2013-01-01

    direction. The modification of the injection pressure enables to modify the bearing static and dynamic properties according to the operational needs. The results presented are obtained using a theoretical model, which considers all the effects that determine the bearing behavior (controllable......This paper is aimed at presenting results regarding the static and thermal behavior of a tilting-pad journal bearing operating under controllable regime. The bearing is rendered controllable by injecting high pressure oil into the clearance using holes drilled across the bearing pads in the radial...... elastothermohydrodynamic lubrication regime), as well as using a test rig designed and built to this effect. The comparison between experimental and theoretical results provides solid ground to determine the accuracy of the available model for the the prediction of the steady-state behavior of the tilting-pad bearing...

  11. Five degree-of-freedom control of an ultra-precision magnetically-suspended linear bearing. Ph.D. Thesis - MIT

    Science.gov (United States)

    Trumper, David L.; Slocum, A. H.

    1991-01-01

    The authors constructed a high precision linear bearing. A 10.7 kg platen measuring 125 mm by 125 mm by 350 mm is suspended and controlled in five degrees of freedom by seven electromagnets. The position of the platen is measured by five capacitive probes which have nanometer resolution. The suspension acts as a linear bearing, allowing linear travel of 50 mm in the sixth degree of freedom. In the laboratory, this bearing system has demonstrated position stability of 5 nm peak-to-peak. This is believed to be the highest position stability yet demonstrated in a magnetic suspension system. Performance at this level confirms that magnetic suspensions can address motion control requirements at the nanometer level. The experimental effort associated with this linear bearing system is described. Major topics are the development of models for the suspension, implementation of control algorithms, and measurement of the actual bearing performance. Suggestions for the future improvement of the bearing system are given.

  12. Fractional Order PID Control of Rotor Suspension by Active Magnetic Bearings

    Directory of Open Access Journals (Sweden)

    Parinya Anantachaisilp

    2017-01-01

    Full Text Available One of the key issues in control design for Active Magnetic Bearing (AMB systems is the tradeoff between the simplicity of the controller structure and the performance of the closed-loop system. To achieve this tradeoff, this paper proposes the design of a fractional order Proportional-Integral-Derivative (FOPID controller. The FOPID controller consists of only two additional parameters in comparison with a conventional PID controller. The feasibility of FOPID for AMB systems is investigated for rotor suspension in both the radial and axial directions. Tuning methods are developed based on the evolutionary algorithms for searching the optimal values of the controller parameters. The resulting FOPID controllers are then tested and compared with a conventional PID controller, as well as with some advanced controllers such as Linear Quadratic Gausian (LQG and H ∞ controllers. The comparison is made in terms of various stability and robustness specifications, as well as the dimensions of the controllers as implemented. Lastly, to validate the proposed method, experimental testing is carried out on a single-stage centrifugal compressor test rig equipped with magnetic bearings. The results show that, with a proper selection of gains and fractional orders, the performance of the resulting FOPID is similar to those of the advanced controllers.

  13. Orthostatic Tremor and Orthostatic Myoclonus: Weight-bearing Hyperkinetic Disorders: A Systematic Review, New Insights, and Unresolved Questions

    Directory of Open Access Journals (Sweden)

    Anhar Hassan

    2016-11-01

    Full Text Available Background: Orthostatic tremor (OT and orthostatic myoclonus (OM are weight-bearing hyperkinetic movement disorders most commonly affecting older people that induce “shaky legs” upon standing. OT is divided into “classical” and “slow” forms based on tremor frequency. In this paper, the first joint review of OT and OM, we review the literature and compare and contrast their demographic, clinical, electrophysiological, neuroimaging, pathophysiological, and treatment characteristics. Methods: A PubMed search up to July 2016 using the phrases “orthostatic tremor,” “orthostatic myoclonus,” “shaky legs,” and “shaky legs syndrome” was performed. Results: OT and OM should be suspected in older patients reporting unsteadiness with prolonged standing and/or who exhibit cautious, wide-based gaits. Surface electromyography (SEMG is necessary to verify the diagnoses. Functional neuroimaging and electrophysiology suggest the generator of classical OT lies within the cerebellothalamocortical network. For OM, and possibly slow OT, the frontal, subcortical cerebrum is the most likely origin. Clonazepam is the most useful medication for classical OT, and levetiracetam for OM, although results are often disappointing. Deep brain stimulation appears promising for classical OT. Rolling walkers reliably improve gait affected by these disorders, as both OT and OM attenuate when weight is transferred from the legs to the arms. Discussion: Orthostatic hyperkinesias are likely underdiagnosed, as SEMG is often unavailable in clinical practice, and thus may be more frequent than currently recognized. The shared weight-bearing induction of OT and OM may indicate a common pathophysiology. Further research, including use of animal models, is necessary to better define the prevalence and pathophysiology of OT and OM, in order to improve their treatment, and provide additional insights into basic balance and gait mechanisms.

  14. Associations of body weight perception and weight control behaviors with problematic internet use among Korean adolescents.

    Science.gov (United States)

    Park, Subin; Lee, Yeeun

    2017-05-01

    We examined the association of body mass index (BMI), body weight perception, and weight control behaviors with problematic Internet use in a nationwide sample of Korean adolescents. Cross-sectional data from the 2010 Korean Youth Risk Behavior Web-based Survey collected from 37,041 boys and 33,655 girls in middle- and high- schools (grades 7-12) were analyzed. Participants were classified into groups based on BMI (underweight, normal weight, overweight, and obese), body weight perception (underweight, normal weight, and overweight), and weight control behavior (no weight control behavior, appropriate weight control behavior, inappropriate weight control behavior). The risk of problematic Internet use was assessed with the Korean Internet Addiction Proneness Scale for Youth-Short Form. Both boys and girls with inappropriate weight control behavior were more likely to have problematic Internet use. Underweight, overweight, and obese boys and girls were more likely to have problematic Internet use. For both boys and girls, subjective perception of underweight and overweight were positively associated with problematic Internet use. Given the negative effect of inappropriate weight control behavior, special attention needs to be given to adolescents' inappropriate weight control behavior, and an educational intervention for adolescents to control their weight in healthy ways is needed. Copyright © 2017. Published by Elsevier B.V.

  15. Schizophrenia and weight management: a systematic review of interventions to control weight.

    Science.gov (United States)

    Faulkner, G; Soundy, A A; Lloyd, K

    2003-11-01

    Weight gain is a frequent side effect of antipsychotic medication which has serious implications for a patient's health and well being. This study systematically reviews the literature on the effectiveness of interventions designed to control weight gain in schizophrenia. A systematic search strategy was conducted of major databases in addition to citation searches. Study quality was rated. Sixteen studies met the inclusion criteria. Five of eight pharmacological intervention studies reported small reductions in weight (weight). All behavioural (including diet and/or exercise) interventions reported small reductions in, or maintenance of, weight. Weight loss may be difficult but it is not impossible. Given the inconsistent results, the widespread use of pharmacological interventions cannot be recommended. Both dietary and exercise counselling set within a behavioural modification programme is necessary for sustained weight control.

  16. Lateral Dynamics of Flexible Rotors Supported by Controllable Gas Bearings Theory & Experiment

    DEFF Research Database (Denmark)

    Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar

    2015-01-01

    Active gas bearings might represent a mechatronic answer to the growing industrial need for high performance turbomachinery. In this framework, the paper gives a theoretical and experimental contribution to the improvement of lateral dynamics of rotating machines. The work aims at demonstrating...... theoretically as well as experimentally the feasibility of applying active lubrication to gas journal bearings. The operation principle is to generate active forces by regulating the radial injection of a compressible lubricant (gas) by means of piezoelectric actuators mounted on the back of the bearing sleeve....... The active control principle is built using eddy-current sensor signals to detect the lateral motion of the rotor. A feedback law is used to couple the lateral dynamics of a flexible rotor-bearing system with the pneumatic and dynamic characteristics of a piezoelectric actuated valve system. A proportional...

  17. Validity of the Nintendo Wii Balance Board to assess weight bearing asymmetry during sit-to-stand and return-to-sit task.

    Science.gov (United States)

    Abujaber, Sumayeh; Gillispie, Gregory; Marmon, Adam; Zeni, Joseph

    2015-02-01

    Weight bearing asymmetry is common in patients with unilateral lower limb musculoskeletal pathologies. The Nintendo Wii Balance Board (WBB) has been suggested as a low-cost and widely-available tool to measure weight bearing asymmetry in a clinical environment; however no study has evaluated the validity of this tool during dynamic tasks. Therefore, the purpose of this study was to determine the concurrent validity of force measurements acquired from the WBB as compared to laboratory force plates. Thirty-five individuals before, or within 1 year of total joint arthroplasty performed a sit-to-stand and return-to-sit task in two conditions. First, subjects performed the task with both feet placed on a single WBB. Second, the task was repeated with each foot placed on an individual laboratory force plate. Peak vertical ground reaction force (VGRF) under each foot and the inter-limb symmetry ratio were calculated. Validity was examined using Intraclass Correlation Coefficients (ICC), regression analysis, 95% limits of agreement and Bland-Altman plots. Force plates and the WBB exhibited excellent agreement for all outcome measurements (ICC=0.83-0.99). Bland-Altman plots showed no obvious relationship between the difference and the mean for the peak VGRF, but there was a consistent trend in which VGRF on the unaffected side was lower and VGRF on the affected side was higher when using the WBB. However, these consistent biases can be adjusted for by utilizing regression equations that estimate the force plate values based on the WBB force. The WBB may serve as a valid, suitable, and low-cost alternative to expensive, laboratory force plates for measuring weight bearing asymmetry in clinical settings. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Closed loop identification of a piezoelectrically controlled radial gas bearing: Theory and experiment

    DEFF Research Database (Denmark)

    Sekunda, André Krabdrup; Niemann, Hans Henrik; Poulsen, Niels Kjølstad

    2018-01-01

    Gas bearing systems have extremely small damping properties. Feedback control is thus employed to increase the damping of gas bearings. Such a feedback loop correlates the input with the measurement noise which in turn makes the assumptions for direct identification invalid. The originality...... of this article lies in the investigation of the impact of using different identification methods to identify a rotor-bearing systems’ dynamic model when a feedback loop is active. Two different identification methods are employed. The first method is open loop Prediction Error Method, while the other method...

  19. Prevalence of overweight misperception and weight control behaviors among normal weight adolescents in the United States

    Directory of Open Access Journals (Sweden)

    Kathleen S. Talamayan

    2006-01-01

    Full Text Available Weight perceptions and weight control behaviors have been documented with underweight and overweight adolescents, yet limited information is available on normal weight adolescents. This study investigates the prevalence of overweight misperceptions and weight control behaviors among normal weight adolescents in the U.S. by sociodemographic and geographic characteristics. We examined data from the 2003 Youth Risk Behavior Survey (YRBS. A total of 9,714 normal weight U.S. high school students were included in this study. Outcome measures included self-reported height and weight measurements, overweight misperceptions, and weight control behaviors. Weighted prevalence estimates and odds ratios were computed. There were 16.2% of normal weight students who perceived themselves as overweight. Females (25.3% were more likely to perceive themselves as overweight than males (6.7% (p < 0.05. Misperceptions of overweight were highest among white (18.3% and Hispanic students (15.2% and lowest among black students (5.8%. Females (16.8% outnumbered males (6.8% in practicing at least one unhealthy weight control behavior (use of diet pills, laxatives, and fasting in the past 30 days. The percentage of students who practiced at least one weight control behavior was similar by ethnicity. There were no significant differences in overweight misperception and weight control behaviors by grade level, geographic region, or metropolitan status. A significant portion of normal weight adolescents misperceive themselves as overweight and are engaging in unhealthy weight control behaviors. These data suggest that obesity prevention programs should address weight misperceptions and the harmful effects of unhealthy weight control methods even among normal weight adolescents.

  20. Weight Control: MedlinePlus Health Topic

    Science.gov (United States)

    ... loss medications Show More Show Less Related Health Topics Body Weight Diets Eating Disorders Exercise and Physical Fitness Nutrition Obesity Weight Loss Surgery National Institutes of Health The primary NIH organization for research on Weight Control is the National Institute of ...

  1. Plantar fascia evaluation with a dedicated magnetic resonance scanner in weight-bearing position: our experience in patients with plantar fasciitis and in healthy volunteers.

    Science.gov (United States)

    Sutera, R; Iovane, A; Sorrentino, F; Candela, F; Mularo, V; La Tona, G; Midiri, M

    2010-03-01

    This study assessed the usefulness of upright weight-bearing examination of the ankle/hind foot performed with a dedicated magnetic resonance (MR) imaging scanner in the evaluation of the plantar fascia in healthy volunteers and in patients with clinical evidence of plantar fasciitis. Between January and March 2009, 20 patients with clinical evidence of plantar fasciitis (group A) and a similar number of healthy volunteers (group B) underwent MR imaging of the ankle/hind foot in the upright weight-bearing and conventional supine position. A 0.25-Tesla MR scanner (G-Scan, Esaote SpA, Genoa, Italy) was used with a dedicated receiving coil for the ankle/hind foot. Three radiologists, blinded to patients' history and clinical findings, assessed in consensus morphological and dimensional changes and signal intensity alterations on images acquired in both positions, in different sequences and in different planes. In group A, MR imaging confirmed the diagnosis in 15/20 cases; in 4/15 cases, a partial tear of the plantar fascia was identified in the upright weight-bearing position alone. In the remaining 5/20 cases in group A and in all cases in group B, the plantar fascia showed no abnormal signal intensity. Because of the increased stretching of the plantar fascia, in all cases in group A and B, thickness in the proximal third was significantly reduced (pplantar fascia, which could be overlooked in the supine position.

  2. Weight Control: Attitudes of Dieters and Change Agents.

    Science.gov (United States)

    Parham, Ellen S.; And Others

    1991-01-01

    Survey explores attitudes toward weight loss/weight control among 2 groups of change agents--40 dietitians and 42 fitness instructors--and among 96 people trying to lose weight. Significant differences were found in terms of importance in weight control of diet, drugs, exercise, religion, and will power; in importance of being of normal weight;…

  3. Process for the production of a tantalum and niobium bearing concentrate from a tantalum and niobium bearing ferro-alloy

    International Nuclear Information System (INIS)

    Deweck, J.; Van, H.

    1980-01-01

    In a process for the production of a tantalum and niobium bearing concentrate from a tantalum and niobium bearing ferro-alloy containing tantalum and niobium as carbide, by treating the ferro-alloy in molten state with a controlled amount of an oxidizing agent in order to slag at least most of the tantalum and at least part of the niobium and by separting the so obtained slag phase from the metal phase, the improvement which comprises using air, oxygen enriched air or oxygen as oxidizing agent and adjusting the iron content to the ferro-alloy by adding at least 70% by weight of iron prior to the step of forming the slag so that at least most of the tantalum carbide is dissolved in the molten ferro-alloy

  4. Optimizing weight control in diabetes: antidiabetic drug selection

    Directory of Open Access Journals (Sweden)

    S Kalra

    2010-08-01

    Full Text Available S Kalra1, B Kalra1, AG Unnikrishnan2, N Agrawal3, S Kumar41Bharti Hospital, Karnal; 2Amrita Institute of Medical Science, Kochi; 3Medical College, Gwalior; 4Excel Life Sciences, Noida, IndiaDate of preparation: 18th August 2010Conflict of interest: SK has received speaker fees from Novo Nordisk, sanofi-aventis, MSD, Eli Lilly, BMS, and AstraZeneca.Clinical question: Which antidiabetic drugs provide optimal weight control in patients with type 2 diabetes?Results: Metformin reduces weight gain, and may cause weight loss, when given alone or in combination with other drugs. Pioglitazone and rosiglitazone use is associated with weight gain. Use of the glucagon-like peptide-1 (GLP-1 analogs, liraglutide and exenatide, is associated with weight loss. Dipeptidyl peptidase-4 (DPP-4 inhibitors are considered weight-neutral. Results with insulin therapy are conflicting. Insulin detemir provides weight control along with glycemic control.Implementation: • Weight gain is considered an inevitable part of good glycemic control using conventional modalities of treatment such as sulfonylureas.• Use of metformin, weight-sparing insulin analogs such as insulin detemir, and liraglutide, should be encouraged as monotherapy, or in combination with other drugs.Keywords: weight control, diabetes

  5. Motivation, self-determination, and long-term weight control.

    Science.gov (United States)

    Teixeira, Pedro J; Silva, Marlene N; Mata, Jutta; Palmeira, António L; Markland, David

    2012-03-02

    This article explores the topics of motivation and self-regulation in the context of weight management and related behaviors. We focus on the role of a qualitative approach to address motivation--not only considering the level but also type of motivation--in weight control and related behaviors. We critically discuss the operationalization of motivation in current weight control programs, present a complementary approach to understanding motivation based on self-determination theory, and review empirical findings from weight control studies that have used self-determination theory measures and assessed their association with weight outcomes. Weight loss studies which used Motivational Interviewing (MI) are also reviewed, considering MI's focus on enhancing internal motivation. We hypothesize that current weight control interventions may have been less successful with weight maintenance in part due to their relative disregard of qualitative dimensions of motivation, such as level of perceived autonomy, often resulting in a motivational disconnect between weight loss and weight-related behaviors. We suggest that if individuals fully endorse weight loss-related behavioral goals and feel not just competent but also autonomous about reaching them, as suggested by self-determination theory, their efforts are more likely to result in long-lasting behavior change.

  6. A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection

    Science.gov (United States)

    Imaouchen, Yacine; Kedadouche, Mourad; Alkama, Rezak; Thomas, Marc

    2017-01-01

    Signal processing techniques for non-stationary and noisy signals have recently attracted considerable attentions. Among them, the empirical mode decomposition (EMD) which is an adaptive and efficient method for decomposing signals from high to low frequencies into intrinsic mode functions (IMFs). Ensemble EMD (EEMD) is proposed to overcome the mode mixing problem of the EMD. In the present paper, the Complementary EEMD (CEEMD) is used for bearing fault detection. As a noise-improved method, the CEEMD not only overcomes the mode mixing, but also eliminates the residual of added white noise persisting into the IMFs and enhance the calculation efficiency of the EEMD method. Afterward, a selection method is developed to choose relevant IMFs containing information about defects. Subsequently, a signal is reconstructed from the sum of relevant IMFs and a Frequency-Weighted Energy Operator is tailored to extract both the amplitude and frequency modulations from the selected IMFs. This operator outperforms the conventional energy operator and the enveloping methods, especially in the presence of strong noise and multiple vibration interferences. Furthermore, simulation and experimental results showed that the proposed method improves performances for detecting the bearing faults. The method has also high computational efficiency and is able to detect the fault at an early stage of degradation.

  7. Telemetry experiments with a hibernating black bear

    Science.gov (United States)

    Craighead, J. J.; Varney, J. R.; Sumner, J. S.; Craighead, F. C., Jr.

    1972-01-01

    The objectives of this research were to develop and test telemetry equipment suitable for monitoring physiological parameters and activity of a hibernating bear in its den, to monitor this data and other environmental information with the Nimbus 3 IRLS data collection system, and to refine immobilizing, handling, and other techniques required in future work with wild bears under natural conditions. A temperature-telemetering transmitter was implanted in the abdominal cavity of a captive black bear and body temperature data was recorded continuously during a 3 month hibernation period. Body temperatures ranging between 37.5 and 31.8 C were observed. Body temperature and overall activity were influenced by disturbances and ambient den temperature. Nychthemeral temperature changes were not noticable. A load cell weight recording device was tested for determining weight loss during hibernation. Monitoring of data by satellite was not attempted. The implanted transmitter was removed and the bear was released with a radiolocation collar at the conclusion of the experiment.

  8. Auxiliary bearing design and rotor dynamics analysis of blower fan for HTR-10

    International Nuclear Information System (INIS)

    Gao Mingshan; Yang Guojun; Xu Yang; Zhao Lei; Yu Suyuan

    2005-01-01

    The electromagnetic bearing instead of ordinary mechanical bearing was chosen to support the rotor in the blower fan system with helium of 10 MW high temperature gas-cooled test reactor (HTR-10), and the auxiliary bearing was applied in the HTR-10 as the backup protector. When the electromagnetic bearing doesn't work suddenly for the power broken, the auxiliary bearing is used to support the falling rotor with high rotating speed. The rotor system will be protected by the auxiliary bearing. The design of auxiliary bearing is the ultimate safeguard for the system. This rotor is vertically mounted to hold the blower fan. The rotor's length is about 1.5 m, its weight is about 240 kg and the rotating speed is about 5400 r/min. Auxiliary bearing design and rotor dynamics analysis are very important for the design of blower fan to make success. The research status of the auxiliary bearing was summarized in the paper. A sort of auxiliary bearing scheme was proposed. MSC.Marc was selected to analyze the vibration mode and the natural frequency of the rotor. The scheme design of auxiliary bearing and analysis result of rotor dynamics offer the important theoretical base for the protector design and control system of electromagnetic bearing of the blower fan. (authors)

  9. Passive axial magnetic bearing with Halbach magnetized array in magnetically suspended control moment gyro application

    International Nuclear Information System (INIS)

    Sun Jinji; Ren Yuan; Fang Jiancheng

    2011-01-01

    The paper presents a special configuration of passive axial magnetic bearing with segmented Halbach magnetized array in magnetically suspended control moment gyro (MSCMG). Peculiarity of presented passive axial magnetic bearing is its ability to provide angular stiffness so that it can produce gyro moment when it is used in MSCMG. The MSCMG with this passive axial magnetic bearing can efficiently reduce the power loss when it supplies gyro moment compared with the five degrees of freedom (5-DOF) MSCMG. The characteristics of the suspension force and stiffness of the passive axial magnetic bearing are studied using finite element method (FEM). The performance of the presented passive axial magnetic bearing with Halbach magnetized array is verified by a prototyped MSCMG. - Research highlights: → Passive axial magnetic bearing is used to provide angular stiffness. → Passive axial magnetic bearing is based on repulsion. → Layers Halbach magnetized array realizes higher stiffness per bearing volume. → Passive axial magnetic bearing can provide gyro moment in CMG. → Power loss of MSCMG with PMB does not increase when it provides gyro moment.

  10. On the Controllability and Observability of Actively Lubricated Journal Bearings with Pads Featuring Different Nozzle-Pivot Configurations

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2017-01-01

    tilt angle, (iii) the vertical pad movement-due to the pivot flexibility, and (iv) the controllable force as the hydraulic DOF. The test rig consists of a rigid rotor supported by a single rocker-pivoted rigid pad. A thorough parametric study is carried out by investigating the effects of: (a) nozzle-pivot...... offset, (b) pivot flexibility, and (c) bearing loading on these control basics in order to determine the pad with the best control characteristics. Different nozzle-pivot offsets can be set by varying the positioning of either the injection nozzle or the pivot line. The influence of the pivot compliance...... on the bearing dynamics is assessed by benchmarking the results obtained with the flexible pivot against the rigid pivot. Three different bearing loads are studied. According to the results, the proposed configurations, especially the offset-pivot pad with slight offsets, improve the bearing control...

  11. Vaping to lose weight: Predictors of adult e-cigarette use for weight loss or control.

    Science.gov (United States)

    Morean, Meghan E; Wedel, Amelia V

    2017-03-01

    Some traditional cigarette smokers are motivated to smoke to lose weight or control their weight. The current study evaluated whether a subset of adult e-cigarette users reported vaping to lose or control their weight and examined potential predictors of vaping for weight management. Adult e-cigarette users (n=459) who reported wanting to lose weight or maintain their weight completed an anonymous online survey. Participants reported on demographics, vaping frequency, e-cigarette nicotine content, cigarette smoking status, preferred e-cigarette/e-liquid flavors, current weight status (i.e., overweight, underweight), use of dieting strategies associated with anorexia and bulimia, lifetime history of binge eating, self-discipline, and impulse control. Binary logistic regression was used to examine whether vaping for weight loss/control was associated with the aforementioned variables. Participants who reported vaping for weight loss/control (13.5%) were more likely to vape frequently (adjOR=1.15; 95% CI [1.00, 1.31]); be overweight (adjOR=2.80; [1.33, 5.90]); restrict calories (adjOR=2.23; [1.13, 4.42]); have poor impulse control (adjOR=0.59; [0.41, 0.86]); and prefer coffee- (adjOR=2.92; [1.47, 5.80]) or vanilla-flavored e-liquid (adjOR=7.44; [1.56, 36.08]). A subset of adult e-cigarette users reported vaping for weight loss/control, raising concerns about expanded, scientifically unsubstantiated uses of e-cigarettes. Identifying where individuals obtain information about vaping for weight loss (e.g., e-cigarette ads, Internet) and whether weight-related motives promote e-cigarette initiation among e-cigarette naïve individuals is important to informing regulatory efforts. Further research also is needed to better understand the link between e-liquid flavors and weight loss motivations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Agreement Between Actual and Perceived Body Weight in Adolescents and Their Weight Control Behaviors

    Directory of Open Access Journals (Sweden)

    Sun Mi Shin

    2017-06-01

    Full Text Available Background : To investigate the agreements between actual and perceived body weight status among adolescents and to identify the associations of disagreements with their weight control behaviors. Methods : This study used the secondary data of a sample survey (n=13,871 of the Seoul Student Health Examination among middle and high schools in 2010. Agreements between actual (underweight, normal, overweight, and obese, according to 2007 Korean National Growth Charts and perceived body weight status (underweight, normal, overweight, and obese were examined using Chi-square and Cohen’s kappa agreement, and then multinomial logistic regression including gender, grade, and attempt of weight control or method of weight control was done. Results : Agreements between actual and perceived body weight status were only 45.2%, and disagreements were up to 54.8%, including mild over- (20.4%, severe over- (1.8%, mild under- (29.5%, and severe under-estimation (3.1%. The kappa coefficient of agreement was only 0.19. The odds ratios on severe over-estimated perception were 1.59 (95% CI, 1.22-2.07 in female subjects, 1.78 (95% CI, 1.36-2.34 in diet control behaviors, and 1.53 (95% CI, 1.18-2.00 in exercise. The odds ratios on severe under-estimated perception were only 0.40 (95% CI, 0.32–0.50 in female subjects but 5.77 (95% CI, 3.68-9.06 in taking medication. Conclusion : There were associations of body weight control behaviors with disagreements of actual and perceived weight status. Therefore, further study is needed to identify the weight disagreement-related factors and to promote the desired weight control behaviors for adolescents.

  13. Motivation, self-determination, and long-term weight control

    Directory of Open Access Journals (Sweden)

    Teixeira Pedro J

    2012-03-01

    Full Text Available Abstract This article explores the topics of motivation and self-regulation in the context of weight management and related behaviors. We focus on the role of a qualitative approach to address motivation - not only considering the level but also type of motivation - in weight control and related behaviors. We critically discuss the operationalization of motivation in current weight control programs, present a complementary approach to understanding motivation based on self-determination theory, and review empirical findings from weight control studies that have used self-determination theory measures and assessed their association with weight outcomes. Weight loss studies which used Motivational Interviewing (MI are also reviewed, considering MI's focus on enhancing internal motivation. We hypothesize that current weight control interventions may have been less successful with weight maintenance in part due to their relative disregard of qualitative dimensions of motivation, such as level of perceived autonomy, often resulting in a motivational disconnect between weight loss and weight-related behaviors. We suggest that if individuals fully endorse weight loss-related behavioral goals and feel not just competent but also autonomous about reaching them, as suggested by self-determination theory, their efforts are more likely to result in long-lasting behavior change.

  14. Motivation, self-determination, and long-term weight control

    Science.gov (United States)

    2012-01-01

    This article explores the topics of motivation and self-regulation in the context of weight management and related behaviors. We focus on the role of a qualitative approach to address motivation - not only considering the level but also type of motivation - in weight control and related behaviors. We critically discuss the operationalization of motivation in current weight control programs, present a complementary approach to understanding motivation based on self-determination theory, and review empirical findings from weight control studies that have used self-determination theory measures and assessed their association with weight outcomes. Weight loss studies which used Motivational Interviewing (MI) are also reviewed, considering MI's focus on enhancing internal motivation. We hypothesize that current weight control interventions may have been less successful with weight maintenance in part due to their relative disregard of qualitative dimensions of motivation, such as level of perceived autonomy, often resulting in a motivational disconnect between weight loss and weight-related behaviors. We suggest that if individuals fully endorse weight loss-related behavioral goals and feel not just competent but also autonomous about reaching them, as suggested by self-determination theory, their efforts are more likely to result in long-lasting behavior change. PMID:22385818

  15. Measurements of Weight Bearing Asymmetry Using the Nintendo Wii Fit Balance Board Are Not Reliable for Older Adults and Individuals With Stroke.

    Science.gov (United States)

    Liuzzo, Derek M; Peters, Denise M; Middleton, Addie; Lanier, Wes; Chain, Rebecca; Barksdale, Brittany; Fritz, Stacy L

    Clinicians and researchers have used bathroom scales, balance performance monitors with feedback, postural scale analysis, and force platforms to evaluate weight bearing asymmetry (WBA). Now video game consoles offer a novel alternative for assessing this construct. By using specialized software, the Nintendo Wii Fit balance board can provide reliable measurements of WBA in healthy, young adults. However, reliability of measurements obtained using only the factory settings to assess WBA in older adults and individuals with stroke has not been established. To determine whether measurements of WBA obtained using the Nintendo Wii Fit balance board and default settings are reliable in older adults and individuals with stroke. Weight bearing asymmetry was assessed using the Nintendo Wii Fit balance board in 2 groups of participants-individuals older than 65 years (n = 41) and individuals with stroke (n = 41). Participants were given a standardized set of instructions and were not provided auditory or visual feedback. Two trials were performed. Intraclass correlation coefficients (ICC), standard error of measure (SEM), and minimal detectable change (MDC) scores were determined for each group. The ICC for the older adults sample was 0.59 (0.35-0.76) with SEM95 = 6.2% and MDC95 = 8.8%. The ICC for the sample including individuals with stroke was 0.60 (0.47-0.70) with SEM95 = 9.6% and MDC95 = 13.6%. Although measurements of WBA obtained using the Nintendo Wii Fit balance board, and its default factory settings, demonstrate moderate reliability in older adults and individuals with stroke, the relatively high associated SEM and MDC values substantially reduce the clinical utility of the Nintendo Wii Fit balance board as an assessment tool for WBA. Weight bearing asymmetry cannot be measured reliably in older adults and individuals with stroke using the Nintendo Wii Fit balance board without the use of specialized software.

  16. Lateral vibration control of a flexible overcritical rotor via an active gas bearing – Theoretical and experimental comparisons

    DEFF Research Database (Denmark)

    Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar

    2016-01-01

    The lack of damping of radial gas bearings leads to high vibration levels of a rotor supported by this type of bearing when crossing resonant areas. This is even more relevant for flexible rotors, as studied in this work. In order to reduce these high vibration levels, an active gas bearing...... is proposed. The control action of this active bearing is selected based on two different strategies: a simple proportional integral derivative controller and an optimal controller. Both controllers are designed based on a theoretical model previously presented. The dynamics of the flexible rotor are modelled......-based controllers are compared against experimental results, showing good agreement. Theoretical and experimental results show a significant increase in the damping ratio of the system, enabling the flexible rotor to run safely across the critical speeds and up to 12,000rev/min, i.e. 50 percent over the second...

  17. Servo Reduces Friction In Flexure Bearing

    Science.gov (United States)

    Clingman, W. Dean

    1991-01-01

    Proposed servocontrol device reduces such resistive torques as stiction, friction, ripple, and cogging in flexure bearing described in LAR-14348, "Flexure Bearing Reduces Startup Friction". Reduces frictional "bump" torque encountered when bearing ball runs into buildup of grease on bearing race. Also used as cable follower to reduce torque caused by cable and hoses when they bend because of motion of bearing. New device includes torquer across ball race. Torquer controlled by servo striving to keep flexure at null, removing torque to outer ring. In effect, device is inner control loop reducing friction, but does not control platforms or any outer-control-loop functions.

  18. Immediate mobilisation with complete weight bearing after uncemented total hip replacement in elderly

    Directory of Open Access Journals (Sweden)

    Sankarlingam P, Shivraj V, V R Subramaniyam

    2014-11-01

    Full Text Available This prospective study was analyzed in 23 patients who were allowed to do immediate weight bearing after uncemented total hip arthroplasty. Immediate mobilization shortened the hospital stay and facilitated early rehabilitation of hip. Immediate mobilization was started on postoperative Day 3 rather than Day 7 without any adverse consequences to the patients. A series of 23 elderly patients of age more than 60 years, who were diagnosed with conditions such as avascular necrosis of hip, non union of fracture neck of femur, trochanteric non union and rheumatoid arthritis, underwent uncemented total hip replacement and immediate mobilization was started in our hospital. Patients were evaluated by Harris Hip Scoring Scale. All ambulated patients had painless hip and the mean Harris Hip Score was 85. There were no incidence of stem subsidence, acetabular component loosening, and heterotrophic ossification. This data concluded that early intensive rehabilitation yielded faster attainment of short-term functional milestones in fewer days.

  19. Weighing every day matters: daily weighing improves weight loss and adoption of weight control behaviors.

    Science.gov (United States)

    Steinberg, Dori M; Bennett, Gary G; Askew, Sandy; Tate, Deborah F

    2015-04-01

    Daily weighing is emerging as the recommended self-weighing frequency for weight loss. This is likely because it improves adoption of weight control behaviors. To examine whether weighing every day is associated with greater adoption of weight control behaviors compared with less frequent weighing. Longitudinal analysis of a previously conducted 6-month randomized controlled trial. Overweight men and women in Chapel Hill, NC, participated in the intervention arm (N=47). The intervention focused on daily weighing for weight loss using an e-scale that transmitted weights to a study website, along with weekly e-mailed lessons and tailored feedback on daily weighing adherence and weight loss progress. We gathered objective data on self-weighing frequency from the e-scales. At baseline and 6 months, weight change was measured in the clinic and weight control behaviors (total items=37), dietary strategies, and calorie expenditure from physical activity were assessed via questionnaires. Calorie intake was assessed using an online 24-hour recall tool. We used χ(2) tests to examine variation in discrete weight control behaviors and linear regression models to examine differences in weight, dietary strategies, and calorie intake and expenditure by self-weighing frequency. Fifty-one percent of participants weighed every day (n=24) over 6 months. The average self-weighing frequency among those weighing less than daily (n=23) was 5.4±1.2 days per week. Daily weighers lost significantly more weight compared with those weighing less than daily (mean difference=-6.1 kg; 95% CI -10.2 to -2.1; P=0.004). The total number of weight control behaviors adopted was greater among daily weighers (17.6±7.6 vs 11.2±6.4; P=0.004). There were no differences by self-weighing frequency in dietary strategies, calorie intake, or calorie expenditure. Weighing every day led to greater adoption of weight control behaviors and produced greater weight loss compared with weighing most days of the

  20. Feedback-controlled lubrication for reducing the lateral vibration of flexible rotors supported by tilting-pad journal bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2015-01-01

    function is optimized in the stabilizing gain domain and then chosen from a subdomain imposed by servovalve restrictions. This work demonstrates enhancements of the dynamic response of flexible rotor-bearing systems supported by an active tilting-pad journal bearing by means of the feedback......The feedback-controlled lubrication regime, based on a model-free designed proportional–derivative controller, is experimentally investigated in a flexible rotor mounted on an actively-lubricated tilting-pad journal bearing. With such a lubrication regime, both the resulting pressure distribution...

  1. Control Chart on Semi Analytical Weighting

    Science.gov (United States)

    Miranda, G. S.; Oliveira, C. C.; Silva, T. B. S. C.; Stellato, T. B.; Monteiro, L. R.; Marques, J. R.; Faustino, M. G.; Soares, S. M. V.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.

    2018-03-01

    Semi-analytical balance verification intends to assess the balance performance using graphs that illustrate measurement dispersion, trough time, and to demonstrate measurements were performed in a reliable manner. This study presents internal quality control of a semi-analytical balance (GEHAKA BG400) using control charts. From 2013 to 2016, 2 weight standards were monitored before any balance operation. This work intended to evaluate if any significant difference or bias were presented on weighting procedure over time, to check the generated data reliability. This work also exemplifies how control intervals are established.

  2. Simulation to coating weight control for galvanizing

    Science.gov (United States)

    Wang, Junsheng; Yan, Zhang; Wu, Kunkui; Song, Lei

    2013-05-01

    Zinc coating weight control is one of the most critical issues for continuous galvanizing line. The process has the characteristic of variable-time large time delay, nonlinear, multivariable. It can result in seriously coating weight error and non-uniform coating. We develop a control system, which can automatically control the air knives pressure and its position to give a constant and uniform zinc coating, in accordance with customer-order specification through an auto-adaptive empirical model-based feed forward adaptive controller, and two model-free adaptive feedback controllers . The proposed models with controller were applied to continuous galvanizing line (CGL) at Angang Steel Works. By the production results, the precise and stability of the control model reduces over-coating weight and improves coating uniform. The product for this hot dip galvanizing line does not only satisfy the customers' quality requirement but also save the zinc consumption.

  3. Self-perception of body weight status and weight control practices among adolescents in Malaysia.

    Science.gov (United States)

    Zainuddin, Ahmad Ali; Manickam, Mala A; Baharudin, Azli; Omar, Azahadi; Cheong, Siew Man; Ambak, Rashidah; Ahmad, Mohamad Hasnan; Ghaffar, Suhaila Abdul

    2014-09-01

    The prevalence of overweight and obesity among adolescents is rising rapidly in many countries, including Malaysia. This article aims to present the associations between body mass index-based body weight status, body weight perception, and weight control practices among adolescents in Malaysia. The Malaysia School Based Nutrition Survey 2012, which included a body weight perception questionnaire and anthropometric measurements, was conducted on a representative sample of 40 011 students from Standard 4 until Form 5, with a 90.5% response rate. Comparing actual and perceived body weight status, the findings show that 13.8% of adolescents underestimated their weight, 35.0% overestimated, and 51.2% correctly judged their own weight. Significantly more normal weight girls felt they were overweight, whereas significantly more overweight boys perceived themselves as underweight. The overall appropriateness of weight control practices to body weight was 72.6%. Adolescents attempting to lose or gain weight need to have better understanding toward desirable behavioral changes. © 2014 APJPH.

  4. Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2017-01-01

    This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical and experimen...... derived in part I. Results show further suppression of resonant vibrations when using the feedback-controlled or active lubrication, overweighting the reduction already achieved with hybrid lubrication, thus improving the whole machine dynamic performance.......This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical...... and experimental analyses are presented with focus on the reduction of rotor lateral vibration. This part is devoted to synthesising model-based LQG optimal controllers (LQR regulator + Kalman Filter) for the feedback-controlled lubrication and is based upon the mathematical model of the rotor-bearing system...

  5. Development testing of high temperature bearings for SP-100 control drive assemblies

    Science.gov (United States)

    Dalcher, Alfred W.; Kjaer-Olsen, Christian G.; Martinez, Carlos; Ogawa, Stanley Y.; Springer, Dwight R.; Yaspo, Robert

    1992-01-01

    Initial phases of two distinct SP-100 control drive assembly bearing test programs were successfully completed at elevated temperature in vacuum. The first was for the reflector drive line spherical self-aligning bearings. Each bearing consisted of a carbon-graphite ball mounted on an aluminum oxide-coated Ta-10%W shaft, captured by an aluminum oxide-coated Ta-10%W socket. One set of these bearings was exposed to temperatures up to 1180K (1665°F) at 1.33×10-6 Pa (1×10-8 torr) and subjected to 38000 cycles of motion. Friction coefficients were found to be between 0.11 and 0.25 over the full range of operation. Overall performance of the bearings was excellent, with only slight wear observed. The second test program was for the safety rod slider bearing. Zirconium carbide coated Nb-1%Zr bearings pads were stroked inside a molybdenum tube at temperatures up to 1422 K (2100°F) at ˜1.33×10-6 Pa with a normal load of 1.02 Kg between each sliding surface. Coefficients of sliding friction were found to increase from 0.90 at 293 K to 1.20 at 1422 K prior to high temperature dwells. Results were consistent over the range of stroke velocities; 5.1 to 51 mm (0.2 to 2.0 inches) per second. Following dwells of 92, 72, and 110 hours at 1422 K, static friction coefficients as high as 5.4 were observed prior to initiation of sliding, after which sliding friction coefficients of ˜1.6 were seen. Breakaway forces were well within the actuator design limits.

  6. The TiltMeter app is a novel and accurate measurement tool for the weight bearing lunge test.

    Science.gov (United States)

    Williams, Cylie M; Caserta, Antoni J; Haines, Terry P

    2013-09-01

    The weight bearing lunge test is increasing being used by health care clinicians who treat lower limb and foot pathology. This measure is commonly established accurately and reliably with the use of expensive equipment. This study aims to compare the digital inclinometer with a free app, TiltMeter on an Apple iPhone. This was an intra-rater and inter-rater reliability study. Two raters (novice and experienced) conducted the measurements in both a bent knee and straight leg position to determine the intra-rater and inter-rater reliability. Concurrent validity was also established. Allied health practitioners were recruited as participants from the workplace. A preconditioning stretch was conducted and the ankle range of motion was established with the weight bearing lunge test position with firstly the leg straight and secondly with the knee bent. The measurement device and each participant were randomised during measurement. The intra-rater reliability and inter-rater reliability for the devices and in both positions were all over ICC 0.8 except for one intra-rater measure (Digital inclinometer, novice, ICC 0.65). The inter-rater reliability between the digital inclinometer and the tilmeter was near perfect, ICC 0.96 (CI: 0.898-0.983); Concurrent validity ICC between the two devices was 0.83 (CI: -0.740 to 0.445). The use of the Tiltmeter app on the iPhone is a reliable and inexpensive tool to measure the available ankle range of motion. Health practitioners should use caution in applying these findings to other smart phone equipment if surface areas are not comparable. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  7. Using Positive Deviance for Determining Successful Weight-Control Practices

    Science.gov (United States)

    Stuckey, Heather L.; Boan, Jarol; Kraschnewski, Jennifer L.; Miller-Day, Michelle; Lehman, Erik B.; Sciamanna, Christopher N.

    2013-01-01

    Based on positive deviance (examining the practices of successful individuals), we identified five primary themes from 36 strategies that help to maintain long-term weight loss (weight control) in 61 people. We conducted in-depth interviews to determine what successful individuals did and/or thought about regularly to control their weight. The themes included weight-control practices related to (a) nutrition: increase water, fruit, and vegetable intake, and consistent meal timing and content; (b) physical activity: follow and track an exercise routine at least 3×/week; (c) restraint: practice restraint by limiting and/or avoiding unhealthy foods; (d) self-monitor: plan meals, and track calories/weight progress; and (e) motivation: participate in motivational programs and cognitive processes that affect weight-control behavior. Using the extensive data involving both the practices and practice implementation, we used positive deviance to create a comprehensive list of practices to develop interventions for individuals to control their weight. PMID:20956609

  8. The difference between actual and prescribed weight bearing of total hip patients with a trochanteric osteotomy: long-term vertical force measurements inside and outside the hospital

    NARCIS (Netherlands)

    H.L.P. Hurkmans (Henri); J.B.J. Bussmann (Hans); R.W. Selles (Ruud); E. Benda (Eric); H.J. Stam (Henk); J.A.N. Verhaar (Jan)

    2007-01-01

    textabstractOBJECTIVE: To determine whether patients load the operated leg at a prescribed weight-bearing target load during postoperative recovery. DESIGN: A descriptive prospective study. SETTING: Orthopedic clinic and patients' homes. PARTICIPANTS: Fifty patients who had undergone total hip

  9. Gender and Socioeconomic Status in Relation to Weight Perception and Weight Control Behavior in Korean Adults

    Directory of Open Access Journals (Sweden)

    Hee-Kyung Joh

    2013-02-01

    Full Text Available Aim: In Korea, obesity is more prevalent among men and lower socioeconomic groups. To explain this obesity disparity, we compared weight perception and weight control behavior across gender and socioeconomic status (SES. Methods: We analyzed data from 16,260 participants aged 20 years or older in a nationally representative cross-sectional survey. SES indicators included education and income levels. Weight under-perception was defined when participants considered themselves lighter than their measured BMI status. Either no active or inappropriate weight control (i.e., trying to gain weight in obese individuals was considered to be unhealthy patterns. Multivariate prevalence ratios were calculated using log-binomial regressions. Results: Men had a higher prevalence of weight under-perception (24.5 vs. 11.9% and unhealthy patterns of weight control behavior (57 vs. 40% than women. Low education level was associated with weight under-perception (ptrend = 0.022 in men, ptrend trend trend = 0.047 in men, ptrend Conclusion: Weight perception and weight control behavior significantly varied by gender and SES. Public actions should be directed toward improving perception and behavior of high-risk populations.

  10. The observation about the change of the body weight for tumor patients and the bearing tumor mice in radiotherapy

    International Nuclear Information System (INIS)

    Wu Dijun; Ju Yongjian; Ning Liyan; Wu Hong; Wang Gaoren; Gao Xuan; Tang Yahong

    2010-01-01

    Objective: To observe the change of the body weight for tumor patients and the bearing tumor mice in radiotherapy. Methods: For 63 tumor patients, the body weight (BW) were measured before and after radiotherapy respectively, and then the change of BW were compared and analyzed with that of 23 healthy volunteers at the median treatment period. Also 45 mice bearing human galactophore tumor cells SK-BR-3 were divided into irradiation and non-irradiation groups, and the change of BW for these two groups were measured and analyzed. Results: The average BW decreases in the irradiation groups' mice but increase in the non-irradiation groups' mice, and the change of BW in these two groups has the statistical significance respectively, also the difference between these two groups has the statistical significance. For the four groups' tumor patients including 63 tumor patients as a whole, the nasopharynx cancer, esophagus cancer and lung cancer, the average BW decreases, but only in nasopharynx cancer and lung cancer groups the statistical significance are found. And at the same period, the BW of healthy volunteers are maintained. Compared change of BW in the four tumor groups with that in the healthy volunteers respectively, except the esophagus cancer group, the statistical significance are found in the other three groups. Conclusion: For tumor patients,perhaps the BW will lose in the period of radiotherapy, so the effect of lose of BW must be cared about. (authors)

  11. FEASIBILITY STUDY OF AIR BEARING ROCKET SLED SLIPPERS

    Science.gov (United States)

    a simple self-acting type of bearing can support a typical monorail rocket sled, without contact between the slipper and the rail, at speeds between...slipper bearing is capable of preventing slipper-rail contact over the entire speed range of typical monorail and dual rail sleds. However, the weight and

  12. Changes in weight control behaviors and hedonic hunger during a 12-week commercial weight loss program.

    Science.gov (United States)

    O'Neil, Patrick M; Theim, Kelly R; Boeka, Abbe; Johnson, Gail; Miller-Kovach, Karen

    2012-12-01

    Greater use of key self-regulatory behaviors (e.g., self-monitoring of food intake and weight) is associated with greater weight loss within behavioral weight loss treatments, although this association is less established within widely-available commercial weight loss programs. Further, high hedonic hunger (i.e., susceptibility to environmental food cues) may present a barrier to successful behavior change and weight loss, although this has not yet been examined. Adult men and women (N=111, body mass index M±SD=31.5±2.7kg/m(2)) were assessed before and after participating in a 12-week commercial weight loss program. From pre- to post-treatment, reported usage of weight control behaviors improved and hedonic hunger decreased, and these changes were inversely associated. A decrease in hedonic hunger was associated with better weight loss. An improvement in reported weight control behaviors (e.g., self-regulatory behaviors) was associated with better weight loss, and this association was even stronger among individuals with high baseline hedonic hunger. Findings highlight the importance of specific self-regulatory behaviors within weight loss treatment, including a commercial weight loss program developed for widespread community implementation. Assessment of weight control behavioral skills usage and hedonic hunger may be useful to further identify mediators of weight loss within commercial weight loss programs. Future interventions might specifically target high hedonic hunger and prospectively examine changes in hedonic hunger during other types of weight loss treatment to inform its potential impact on sustained behavior change and weight control. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Control system design for flexible rotors supported by actively lubricated bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2008-01-01

    and keeping the lengths of the two eigenvalues constant in the real-imaginary plane. The methodology is applied to an industrial gas compressor supported by active tilting-pad journal bearings. The unbalance response functions and mode shapes of the flexible rotor with and without active control are presented...

  14. Development and Application of Coating Weight Control Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hyoung [Dongbu Steel, Incheon (Korea, Republic of)

    2010-08-15

    Precise coating weight control is very important issue on quality and minimizing operating costs on continuous galvanizing line. These days, many steel making companies are having a new understanding of cost importance by rise raw material prices and customers requirement for cost reduction. Dongbu steel also meets these situations and decided to develop the technologies. Dongbu Steel developed Integrated coating weight control system jointly with Objective Control Ltd. and installed 2CGL and 4CGL. Several technological functions were developed and realized to achieve true hands-off operation and maximum cost benefit by combining model-based preset and dynamic prediction models. We also installed it on 1 CGL on April, 2008. This paper will present the interface, functions and application result of the integrated coating weight control system including Zn saving and coating weight uniformity.

  15. Weight-related concerns and weight-control behaviors among overweight adolescents in Delhi, India: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Shrivastav Radhika

    2011-02-01

    Full Text Available Abstract Background Obesity is emerging as a public health problem among adolescents in India. The aim of this study was to describe specific weight-related concerns among school-going youth in Delhi, India and to assess the prevalence of weight control behaviors, including healthy and unhealthy ones. Differences by weight status, gender, grade level, and school-type (a proxy for SES in this setting are considered. Methods This study is cross-sectional by design. A sample of eighth and tenth graders (n = 1818 enrolled in Private (middle-high SES and Government (low SES schools (n = 8 in Delhi, India participated. All students' height and weight were measured. Students participated in a survey of weight-related concerns and weight-control behaviors, as well. Mixed-effects regression models were used to test for differences in weight-related concerns and weight-control behaviors across key factors of interest (i.e., weight status, gender, grade level, and SES. Results The combined prevalence of obesity and overweight was 16.6%, overall. Controlling one's weight was important to overweight and non-overweight youth, alike (94.2% v. 84.8%, p p Conclusions Interventions to promote healthy weight control should be pertinent to and well-received by school-going youth in India. Healthy weight control practices need to be explicitly encouraged and unhealthy practices reduced. Future interventions should address issues specific to body image, too, as body dissatisfaction was not uncommon among youth.

  16. GA-based fuzzy reinforcement learning for control of a magnetic bearing system.

    Science.gov (United States)

    Lin, C T; Jou, C P

    2000-01-01

    This paper proposes a TD (temporal difference) and GA (genetic algorithm)-based reinforcement (TDGAR) learning method and applies it to the control of a real magnetic bearing system. The TDGAR learning scheme is a new hybrid GA, which integrates the TD prediction method and the GA to perform the reinforcement learning task. The TDGAR learning system is composed of two integrated feedforward networks. One neural network acts as a critic network to guide the learning of the other network (the action network) which determines the outputs (actions) of the TDGAR learning system. The action network can be a normal neural network or a neural fuzzy network. Using the TD prediction method, the critic network can predict the external reinforcement signal and provide a more informative internal reinforcement signal to the action network. The action network uses the GA to adapt itself according to the internal reinforcement signal. The key concept of the TDGAR learning scheme is to formulate the internal reinforcement signal as the fitness function for the GA such that the GA can evaluate the candidate solutions (chromosomes) regularly, even during periods without external feedback from the environment. This enables the GA to proceed to new generations regularly without waiting for the arrival of the external reinforcement signal. This can usually accelerate the GA learning since a reinforcement signal may only be available at a time long after a sequence of actions has occurred in the reinforcement learning problem. The proposed TDGAR learning system has been used to control an active magnetic bearing (AMB) system in practice. A systematic design procedure is developed to achieve successful integration of all the subsystems including magnetic suspension, mechanical structure, and controller training. The results show that the TDGAR learning scheme can successfully find a neural controller or a neural fuzzy controller for a self-designed magnetic bearing system.

  17. Genetic test feedback with weight control advice: study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Meisel Susanne F

    2012-12-01

    Full Text Available Abstract Background Genetic testing for risk of weight gain is already available over the internet despite uncertain benefits and concerns about adverse emotional or behavioral effects. Few studies have assessed the effect of adding genetic test feedback to weight control advice, even though one of the proposed applications of genetic testing is to stimulate preventive action. This study will investigate the motivational effect of adding genetic test feedback to simple weight control advice in a situation where weight gain is relatively common. Methods/design First-year university students (n = 800 will be randomized to receive either 1 their personal genetic test result for a gene (FTO related to weight gain susceptibility in addition to a leaflet with simple weight control advice (‘Feedback + Advice’ group, FA, or 2 only the leaflet containing simple weight control advice (‘Advice Only’ group, AO. Motivation to avoid weight gain and active use of weight control strategies will be assessed one month after receipt of the leaflet with or without genetic test feedback. Weight and body fat will be measured at baseline and eight months follow-up. We will also assess short-term psychological reactions to the genetic test result. In addition, we will explore interactions between feedback condition and gene test status. Discussion We hope to provide a first indication of the clinical utility of weight-related genetic test feedback in the prevention context. Trial registration Current controlled trials ISRCTN91178663

  18. Validity of clinical outcome measures to evaluate ankle range of motion during the weight-bearing lunge test.

    Science.gov (United States)

    Hall, Emily A; Docherty, Carrie L

    2017-07-01

    To determine the concurrent validity of standard clinical outcome measures compared to laboratory outcome measure while performing the weight-bearing lunge test (WBLT). Cross-sectional study. Fifty participants performed the WBLT to determine dorsiflexion ROM using four different measurement techniques: dorsiflexion angle with digital inclinometer at 15cm distal to the tibial tuberosity (°), dorsiflexion angle with inclinometer at tibial tuberosity (°), maximum lunge distance (cm), and dorsiflexion angle using a 2D motion capture system (°). Outcome measures were recorded concurrently during each trial. To establish concurrent validity, Pearson product-moment correlation coefficients (r) were conducted, comparing each dependent variable to the 2D motion capture analysis (identified as the reference standard). A higher correlation indicates strong concurrent validity. There was a high correlation between each measurement technique and the reference standard. Specifically the correlation between the inclinometer placement at 15cm below the tibial tuberosity (44.9°±5.5°) and the motion capture angle (27.0°±6.0°) was r=0.76 (p=0.001), between the inclinometer placement at the tibial tuberosity angle (39.0°±4.6°) and the motion capture angle was r=0.71 (p=0.001), and between the distance from the wall clinical measure (10.3±3.0cm) to the motion capture angle was r=0.74 (p=0.001). This study determined that the clinical measures used during the WBLT have a high correlation with the reference standard for assessing dorsiflexion range of motion. Therefore, obtaining maximum lunge distance and inclinometer angles are both valid assessments during the weight-bearing lunge test. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  19. Efficacy of lifestyle modification for long-term weight control.

    Science.gov (United States)

    Wadden, Thomas A; Butryn, Meghan L; Byrne, Kirstin J

    2004-12-01

    A comprehensive program of lifestyle modification induces loss of approximately 10% of initial weight in 16 to 26 weeks, as revealed by a review of recent randomized controlled trials, including the Diabetes Prevention Program. Long-term weight control is facilitated by continued patient-therapist contact, whether provided in person or by telephone, mail, or e-mail. High levels of physical activity and the consumption of low-calorie, portion-controlled meals, including liquid meal replacements, can also help maintain weight loss. Additional studies are needed of the effects of macronutrient content (e.g., low-fat vs. low-carbohydrate diets) on long-term changes in weight and health. Research also is needed on effective methods of providing comprehensive weight loss control to the millions of Americans who need it.

  20. Employers should disband employee weight control programs.

    Science.gov (United States)

    Lewis, Alfred; Khanna, Vikram; Montrose, Shana

    2015-02-01

    American corporations continue to expand wellness programs, which now reach an estimated 90% of workers in large organizations, yet no study has demonstrated that the main focus of these programs-weight control-has any positive effect. There is no published evidence that large-scale corporate attempts to control employee body weight through financial incentives and penalties have generated savings from long-term weight loss, or a reduction in inpatient admissions associated with obesity or even long-term weight loss itself. Other evidence contradicts the hypothesis that population obesity rates meaningfully retard economic growth or manufacturing productivity. Quite the contrary, overscreening and crash dieting can impact employee morale and even harm employee health. Therefore, the authors believe that corporations should disband or significantly reconfigure weight-oriented wellness programs, and that the Affordable Care Act should be amended to require such programs to conform to accepted guidelines for harm avoidance.

  1. The effects of gait training with body weight support (BWS) with no body weight support (no-BWS) in stroke patients.

    Science.gov (United States)

    Ullah, Muhammad Asad; Shafi, Hina; Khan, Ghazanfar Ali; Malik, Arshad Nawaz; Amjad, Imran

    2017-07-01

    The purpose of this study was to measure the clinical outcomes for patients with stroke after gait training with body weight support (BWS) and with no body weight support (no-BWS).Experimental group was trained to walk by a BWS system with overhead harness (BWS group), and Control group was trained with full weight bearing walk on their lower extremities. Treatment session comprised of six weeks training. Treatment outcomes were assessed on the basis of Timed 10 Meter Walk Test, Timed Get Up and Go Test and Dynamic Gait Index. There was a significant (PTraining of gait in stroke patients while a percentage of their body weight supported by a harness, resulted in better walking abilities than the Training of gait while full weight was placed on patient's lower extremities.

  2. Weight self-regulation process in adolescence: the relationship between control weight attitudes, behaviors and body weight status

    Directory of Open Access Journals (Sweden)

    Jordi ePich

    2015-05-01

    Full Text Available Adolescents’ self-control weight behaviors were assessed (n= 1961; 12-17 years old; 2007-2008 in the Balearic Islands, Spain. The study analyzed the relationships between body weight status, body image and self-weight concern, and actual attempts to lose weight by restrained eating and/or increased exercising. In terms of regulatory focus theory (RFT, we considered that efforts to lose or to maintain weight (successful or failed would be motivated either by a promotion focus (to show an attractive body, a prevention focus (to avoid social rejection of fatness, or both. Results showed that 41% of overweight boys and 25% of obese boys stated that they had never made any attempt to lose weight, and 13% and 4% in females. Around half of overweight boys and around a quarter of obese boys stated that they were Not at all concerned about weight gain, and girls’ percentages decreased to 13% and 11% respectively. By contrast 57% of normal weight girls monitored their weight and stated that they had tried to slim at least once. Weight self-regulation in females attempted to combine diet and exercise, while boys relied almost exclusively on exercise. Apparent lack of consciousness of body weight status among overweight boys, and more important, subsequent absence of behaviors to reduce their weight clearly challenges efforts to prevent obesity. We argue that several causes may be involved in this outcome, including unconscious emotional (self-defense and cognitive (dissonance mechanisms driven by perceived social stigmatization of obesity. The active participation of social values of male and female body image (strong vs. pretty and the existence of social habituation to overweight are suggested. A better knowledge of psychosocial mechanisms underlying adolescent weight self-control may improve obesity epidemics.

  3. Teasing and weight-control behaviors in adolescent girls

    OpenAIRE

    Leme, Ana Carolina B.; Philippi, Sonia Tucunduva

    2013-01-01

    OBJECTIVE: To analyze the association between weight teasing, body satisfaction and weight control behaviors. METHODS: Cross-sectional study based on adaptation and validity research of a North American questionnaire for adolescent girls about physical activity, nutrition, body image, perceptions, and behaviors. The variables used to conduct the study were weight control behaviors, body satisfaction and presence of teasing by family members. Descriptive analyses were carried out by chi-s...

  4. On frequency-weighted coprime factorization based controller reduction

    OpenAIRE

    Varga, Andras

    2003-01-01

    We consider the efficient solution of a class of coprime factorization based controller approximation problems by using frequency-weighted balancing related model reduction approaches. It is shown that for some special stability enforcing frequency-weights, the computation of the frequency-weighted controllability and observability grammians can be done by solving reduced order Lyapunov equations. The new approach can be used in conjunction with accuracy enhancing square-root and balancing-fr...

  5. Weight change in control group participants in behavioural weight loss interventions: a systematic review and meta-regression study

    Directory of Open Access Journals (Sweden)

    Waters Lauren

    2012-08-01

    Full Text Available Abstract Background Unanticipated control group improvements have been observed in intervention trials targeting various health behaviours. This phenomenon has not been studied in the context of behavioural weight loss intervention trials. The purpose of this study is to conduct a systematic review and meta-regression of behavioural weight loss interventions to quantify control group weight change, and relate the size of this effect to specific trial and sample characteristics. Methods Database searches identified reports of intervention trials meeting the inclusion criteria. Data on control group weight change and possible explanatory factors were abstracted and analysed descriptively and quantitatively. Results 85 trials were reviewed and 72 were included in the meta-regression. While there was no change in control group weight, control groups receiving usual care lost 1 kg more than control groups that received no intervention, beyond measurement. Conclusions There are several possible explanations why control group changes occur in intervention trials targeting other behaviours, but not for weight loss. Control group participation may prevent weight gain, although more research is needed to confirm this hypothesis.

  6. Motivation, self-determination, and long-term weight control

    OpenAIRE

    Teixeira, Pedro J; Silva, Marlene N; Mata, Jutta; Palmeira, António L; Markland, David

    2012-01-01

    Abstract This article explores the topics of motivation and self-regulation in the context of weight management and related behaviors. We focus on the role of a qualitative approach to address motivation - not only considering the level but also type of motivation - in weight control and related behaviors. We critically discuss the operationalization of motivation in current weight control programs, present a complementary approach to understanding motivation based on self-determination theor...

  7. A Three-Dimensional Foil Bearing Performance Map Applied to Oil-Free Turbomachinery

    Science.gov (United States)

    2009-04-01

    stress brought on by excessive viscous power loss; therefore a map that graphically relates component and system-level parameters (bearing size, applied...Introduction Foil bearings are self-acting, hydrodynamic gas bearings that use air as their working fluid . Their use in rotating systems eliminates the...weight, maintenance requirements, speed, and temperature limitations associated with conventional oil-lubricated rotor supports (i.e., bearings, dampers

  8. Force analysis of magnetic bearings with power-saving controls

    International Nuclear Information System (INIS)

    Johnson, D.; Brown, G.V.; Inman, D.J.

    1992-01-01

    Most magnetic bearing control schemes use a bias current with a superimposed control current to linearize the relationship between the control current and the force it delivers. For most operating conditions, the existence of the bias current requires more power than alternative methods that do not use conventional bias. Two such methods are examined which diminish or eliminate bias current. In the typical bias control scheme it is found that for a harmonic control force command into a voltage limited transconductance amplifier, the desired force output is obtained only up to certain combinations of force amplitude and frequency. Above these values, the force amplitude is reduced and a phase lag occurs. The power saving alternative control schemes typically exhibit such deficiencies at even lower command frequencies and amplitudes. To assess the severity of these effects, a time history analysis of the force output is performed for the bias method and the alternative methods. Results of the analysis show that the alternative approaches may be viable. The various control methods examined were mathematically modeled using nondimensionalized variables to facilitate comparison of the various methods

  9. Semiactive balancing control scheme in a rotor - bearing system supported on Mr. Dampers: design and experiments

    Energy Technology Data Exchange (ETDEWEB)

    Silva Navarro, Gerardo; Cabrera Amado, Alvaro [Cinvestav, IPN, Mexico, D.F. (Mexico)

    2007-11-15

    This paper deals with the problem of semiactive balancing control of a rotor-bearing system, where one journal bearings is supported on two radial Magneto-Rheological (MR) dampers. The mathematical model of the rotor-bearing system results from an orthotropic Jeffcott-like model and the dynamics associated to the MR dampers, whose rheological properties depend on the current inputs. For control purposes we use the Choi-Lee-Park polynomial for the MR dampers, which is quite consistent with the tpical nonlinear and complex hysteresis behavior and also simplifies the physical implementation on an experimental setup. The semiactive control scheme for the unbalance reponse of the rotor-bearing system is synthesized using sliding-mode control techniques. Some numerical and experimental results are included to illustrate the dynamic performance and robustness of the overall system. [Spanish] En este trabajo se abora el problema de control semiactivo del desbalance en un sistema rotor-chumacera, donde una de las chumaceras convencionales se monta sobre una suspension con dos amortiguadores Magneto-Reologicos (MR) radiales. El modelo matematico del sistema rotorchumacera se obtiene de un modelo tipo Jefcott ortotropico y la dinamica de los amortiguadores MR, cuyas propiedades reologicas dependen de las corrientes electricas de alimentacion. Para propositos de control se emplea el modelo polinomial de Choi-Lee-Park para los dos amortiguadores MR, el cual es consistente con el tipico comportamiento no-lineal y de histeresis, permitiendo simplificar su implementacion fisica en una plataforma experimental. El esquema de control semiactivo de la respuesta al desbalance, en el sistema rotor-chumacera, se basa en las tecnicas de control por modos deslizantes. Se presentan algunos resultados de simulacion numerica y experimentos que utilizan el funcionamiento y robustez del sistema completo.

  10. How College Students Search the Internet for Weight Control and Weight Management Information: An Observational Study

    Science.gov (United States)

    Senkowski, Valerie; Branscum, Paul

    2015-01-01

    Background: Few studies have attempted to examine how young adults search for health information on the Internet, especially information related to weight control and weight management. Purpose: The purpose of this study was to determine search strategies that college students used for finding information related to weight control and weight…

  11. To Keep and Bear Arms: Gun Control and the Second Amendment. Teacher's Guide.

    Science.gov (United States)

    Edwards, Amy N.; Walker, Tim

    This teacher's guide is designed to accompany the two-part videotape "To Keep and Bear Arms: Gun Control and the Second Amendment." The videotape and teacher's guide should help students to: (1) understand the history of the Second Amendment; (2) examine how guns and gun control laws affect people's lives; (3) compare and contrast the…

  12. Active Magnetic Bearings Stiffness and Damping Identification from Frequency Characteristics of Control System

    Directory of Open Access Journals (Sweden)

    Chaowu Jin

    2016-01-01

    Full Text Available At present, the stiffness and damping identification for active magnetic bearings (AMBs are still in the stage of theoretical analysis. The theoretical analysis indicates that if the mechanical structure and system parameters are determined, AMBs stiffness and damping are only related to frequency characteristic of control system, ignoring operating condition. More importantly, few verification methods are proposed. Considering the shortcomings of the theoretical identification, this paper obtains these coefficients from the experiment by using the magnetic bearing as a sine exciter. The identification results show that AMBs stiffness and damping have a great relationship with the control system and rotating speed. Specifically, at low rotating speed, the stiffness and damping can be obtained from the rotor static suspension by adding the same excitation frequency. However, at high speed, different from the static suspension situation, the AMBs supporting coefficients are not only related to the frequency characteristics of control system, but also related to the system operating conditions.

  13. Accurate tool height control by bearing gap adjustment

    NARCIS (Netherlands)

    Wielen, van der A.M.; Schellekens, P.H.J.; Jaartsveld, F.T.M.

    2002-01-01

    Face turning of optical surfaces on precision lathes needs high precision tool height adjustment, which may be a difficult and time-consuming task. In this paper we present a new tool adjustment mechanism based on varying the bearing gap height of the hydrostatic bearings present in precision lathe

  14. Tilted wheel satellite attitude control with air-bearing table experimental results

    Science.gov (United States)

    Inumoh, Lawrence O.; Forshaw, Jason L.; Horri, Nadjim M.

    2015-12-01

    Gyroscopic actuators for satellite control have attracted significant research interest over the years, but their viability for the control of small satellites has only recently started to become clear. Research on variable speed gyroscopic actuators has long been focused on single gimbal actuators; double gimbal actuators typically operate at constant wheel spin rate and allow tilt angle ranges far larger than the ranges needed to operate most satellite missions. This research examines a tilted wheel, a newly proposed type of inertial actuator that can generate torques in all three principal axes of a rigid satellite using a spinning wheel and a double tilt mechanism. The tilt mechanism tilts the angular momentum vector about two axes providing two degree of freedom control, while variation of the wheel speed provides the third. The equations of motion of the system lead to a singularity-free system during nominal operation avoiding the need for complex steering logic. This paper describes the hardware design of the tilted wheel and the experimental setup behind both standalone and spherical air-bearing tables used to test it. Experimental results from the air bearing table are provided with the results depicting the high performance capabilities of the proposed actuator in torque generation.

  15. molecular weight control of a batch suspension polymerization reactor

    International Nuclear Information System (INIS)

    Shahrokhi, M.; Fanaei, M. A.

    2002-01-01

    This paper concerns molecular weight control of a batch polymerization reactor where suspension polymerization of methyl methylacrylate (MMA) takes place. For this purpose, a cascade control structure with two control loops has been selected. The slave loop is used for temperature control using on-line temperature measurements, and the master loop controls the average molecular weights based on its estimated values. Two different control algorithms namely proportional-integral (PI) controller and globally linearizing controller (GLC) have been used for temperature control. An estimator, which has the structure of an extended Kalman filter(EKF), is used for estimating monomer conversion and average molecular weights of polymer using reactor temperature measurements. The performance of proposed control algorithm is evaluated through simulation and experimental studies. The results indicate that a constant average molecular weight cannot be achieved in case of strong gel effect. However, the polydispersity of product will be lower in comparison to isothermal operation. It is also shown that in case of mo dek mismatch, the performance of cascade control is superior compared to the case where only reactor temperature is controlled based on desired temperature trajectory obtained through cascade strategy

  16. Wayside Bearing Fault Diagnosis Based on Envelope Analysis Paved with Time-Domain Interpolation Resampling and Weighted-Correlation-Coefficient-Guided Stochastic Resonance

    Directory of Open Access Journals (Sweden)

    Yongbin Liu

    2017-01-01

    Full Text Available Envelope spectrum analysis is a simple, effective, and classic method for bearing fault identification. However, in the wayside acoustic health monitoring system, owing to the high relative moving speed between the railway vehicle and the wayside mounted microphone, the recorded signal is embedded with Doppler effect, which brings in shift and expansion of the bearing fault characteristic frequency (FCF. What is more, the background noise is relatively heavy, which makes it difficult to identify the FCF. To solve the two problems, this study introduces solutions for the wayside acoustic fault diagnosis of train bearing based on Doppler effect reduction using the improved time-domain interpolation resampling (TIR method and diagnosis-relevant information enhancement using Weighted-Correlation-Coefficient-Guided Stochastic Resonance (WCCSR method. First, the traditional TIR method is improved by incorporating the original method with kinematic parameter estimation based on time-frequency analysis and curve fitting. Based on the estimated parameters, the Doppler effect is removed using the TIR easily. Second, WCCSR is employed to enhance the diagnosis-relevant period signal component in the obtained Doppler-free signal. Finally, paved with the above two procedures, the local fault is identified using envelope spectrum analysis. Simulated and experimental cases have verified the effectiveness of the proposed method.

  17. Relationship between Personalities Attributes (Neuroticism, Psychoticsism and Self-efficacy in Weight Control with People’s Weight

    Directory of Open Access Journals (Sweden)

    Ali Zakiei

    2018-01-01

    Full Text Available Abstract Background: Today, overweight is a damaging agent that threats general health and mental states. So, the current research was done with the aim of specifying the relationship between personality attributes (neuroticism, psychoticism, self-efficacy in weight control with people’s weight. Materials and Methods: This was a descriptive - correlational study. The sample concluded of all of students in Razi university of Kermanshah in year 2015-2016; of them 459 people were selected with stochastic random sampling method. The research tools were self-efficacy of lifestyle that effects on weight and Eisenck personality questionnaires. Results: The results showed that there is a negative significant relationship between weight with neuroticism and psychotics (p<0.001, but there was no significant relationship between neuroticism and weight. Also, the results showed that the components of self-efficacy in weight control can predict weight of people. Based on this, overeating with impact factor equal to 0.001, diet with 0.28 and oral inhibition with -0.13 of impact factor can predict weight of people. Conclusion: Due to the results, psycho personality and self-efficacy have roles in weight control of people.

  18. Genetic characterization of Kenai brown bears (Ursus arctos): Microsatellite and mitochondrial DNA control region variation in brown bears of the Kenai Peninsula, south central Alaska

    Science.gov (United States)

    Jackson, J.V.; Talbot, S.L.; Farley, S.

    2008-01-01

    We collected data from 20 biparentally inherited microsatellite loci, and nucleotide sequence from the maternally inherited mitochondrial DNA (mtDNA) control region, to determine levels of genetic variation of the brown bears (Ursus arctos L., 1758) of the Kenai Peninsula, south central Alaska. Nuclear genetic variation was similar to that observed in other Alaskan peninsular populations. We detected no significant inbreeding and found no evidence of population substructuring on the Kenai Peninsula. We observed a genetic signature of a bottleneck under the infinite alleles model (IAM), but not under the stepwise mutation model (SMM) or the two-phase model (TPM) of microsatellite mutation. Kenai brown bears have lower levels of mtDNA haplotypic diversity relative to most other brown bear populations in Alaska. ?? 2008 NRC.

  19. Bearing construction for refrigeration compresssor

    Science.gov (United States)

    Middleton, Marc G.; Nelson, Richard T.

    1988-01-01

    A hermetic refrigeration compressor has a cylinder block and a crankshaft rotatable about a vertical axis to reciprocate a piston in a cylinder on the cylinder block. A separate bearing housing is secured to the central portion of the cylinder block and extends vertically along the crankshaft, where it carries a pair of roller bearings to journal the crankshaft. The crankshaft has a radially extending flange which is journaled by a thrust-type roller bearing above the bearing housing to absorb the vertical forces on the crankshaft so that all three of the roller bearings are between the crankshaft and the bearing housing to maintain and control the close tolerances required by such bearings.

  20. The Role of Body Weight on Bone in Anorexia Nervosa

    DEFF Research Database (Denmark)

    Frølich, Jacob; Hansen, Stinus; Winkler, Laura Al-Dakhiel

    2017-01-01

    Anorexia nervosa (AN) is associated with decreased bone mineral density and increased risk of fracture. The aim of this study was to assess bone geometry, volumetric bone mineral density (vBMD), trabecular microarchitecture and estimated failure load in weight-bearing vs. non-weight-bearing bones...

  1. Effects of leucine supplemented diet on intestinal absorption in tumor bearing pregnant rats

    Directory of Open Access Journals (Sweden)

    de Mello Maria

    2002-04-01

    Full Text Available Abstract Background It is known that amino acid oxidation is increased in tumor-bearing rat muscles and that leucine is an important ketogenic amino acid that provides energy to the skeletal muscle. Methods To evaluate the effects of a leucine supplemented diet on the intestinal absorption alterations produced by Walker 256, growing pregnant rats were distributed into six groups. Three pregnant groups received a normal protein diet (18% protein: pregnant (N, tumor-bearing (WN, pair-fed rats (Np. Three other pregnant groups were fed a diet supplemented with 3% leucine (15% protein plus 3% leucine: leucine (L, tumor-bearing (WL and pair-fed with leucine (Lp. Non pregnant rats (C, which received a normal protein diet, were used as a control group. After 20 days, the animals were submitted to intestinal perfusion to measure leucine, methionine and glucose absorption. Results Tumor-bearing pregnant rats showed impairment in food intake, body weight gain and muscle protein content, which were less accentuated in WL than in WN rats. These metabolic changes led to reduction in both fetal and tumor development. Leucine absorption slightly increased in WN group. In spite of having a significant decrease in leucine and methionine absorption compared to L, the WL group has shown a higher absorption rate of methionine than WN group, probably due to the ingestion of the leucine supplemented diet inducing this amino acid uptake. Glucose absorption was reduced in both tumor-bearing groups. Conclusions Leucine supplementation during pregnancy in tumor-bearing rats promoted high leucine absorption, increasing the availability of the amino acid for neoplasic cells and, mainly, for fetus and host utilization. This may have contributed to the better preservation of body weight gain, food intake and muscle protein observed in the supplemented rats in relation to the non-supplemented ones.

  2. Effects of leucine supplemented diet on intestinal absorption in tumor bearing pregnant rats

    International Nuclear Information System (INIS)

    Ventrucci, Gislaine; Mello, Maria Alice Roston de; Gomes-Marcondes, Maria Cristina Cintra

    2002-01-01

    It is known that amino acid oxidation is increased in tumor-bearing rat muscles and that leucine is an important ketogenic amino acid that provides energy to the skeletal muscle. To evaluate the effects of a leucine supplemented diet on the intestinal absorption alterations produced by Walker 256, growing pregnant rats were distributed into six groups. Three pregnant groups received a normal protein diet (18% protein): pregnant (N), tumor-bearing (WN), pair-fed rats (Np). Three other pregnant groups were fed a diet supplemented with 3% leucine (15% protein plus 3% leucine): leucine (L), tumor-bearing (WL) and pair-fed with leucine (Lp). Non pregnant rats (C), which received a normal protein diet, were used as a control group. After 20 days, the animals were submitted to intestinal perfusion to measure leucine, methionine and glucose absorption. Tumor-bearing pregnant rats showed impairment in food intake, body weight gain and muscle protein content, which were less accentuated in WL than in WN rats. These metabolic changes led to reduction in both fetal and tumor development. Leucine absorption slightly increased in WN group. In spite of having a significant decrease in leucine and methionine absorption compared to L, the WL group has shown a higher absorption rate of methionine than WN group, probably due to the ingestion of the leucine supplemented diet inducing this amino acid uptake. Glucose absorption was reduced in both tumor-bearing groups. Leucine supplementation during pregnancy in tumor-bearing rats promoted high leucine absorption, increasing the availability of the amino acid for neoplasic cells and, mainly, for fetus and host utilization. This may have contributed to the better preservation of body weight gain, food intake and muscle protein observed in the supplemented rats in relation to the non-supplemented ones

  3. Weight-Control Methods, 3-Year Weight Change, and Eating Behaviors: A Prospective Nationwide Study of Middle-Aged New Zealand Women.

    Science.gov (United States)

    Leong, Sook Ling; Gray, Andrew; Haszard, Jillian; Horwath, Caroline

    2016-08-01

    The effectiveness of women's weight-control methods and the influences of dieting on eating behaviors remain unclear. Our aim was to determine the association of various weight-control methods at baseline with weight change to 3 years, and examine the association between baseline weight-control status (trying to lose weight, trying to prevent weight gain or no weight-control attempts) and changes in intuitive eating and binge eating at 3 years. A nationally representative sample of 1,601 New Zealand women (40 to 50 years) was recruited and completed a self-administered questionnaire at baseline regarding use of variety of weight-control methods. Information on demographic characteristics, weight, height, food habits, binge eating, and intuitive eating were collected at baseline and 3 years. Linear and logistic regression models examined associations between both weight status and weight-control methods at baseline and weight change to 3 years; and baseline weight-control status and change in intuitive eating from baseline to 3 years and binge eating at 3 years. χ(2) tests were used to cross-sectionally compare food habits across the weight status categories at both baseline and 3 years. Trying to lose weight and the use of weight-control methods at baseline were not associated with change in body weight to 3 years. There were a few differences in the frequency of consumption of high-energy-density foods between those trying to lose or maintain weight and those not attempting weight control. Trying to lose weight at baseline was associated with a 2.0-unit (95% CI 0.7 to 3.4, P=0.003) reduction in intuitive eating scores by 3 years (potential range=21 to 105), and 224% (odds ratio=3.24; 95% CI 1.69 to 6.20; Pfoods. Dieting may reduce women's ability to recognize hunger and satiety cues and place women at increased risk of binge eating. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  4. Health literacy and parent attitudes about weight control for children.

    Science.gov (United States)

    Liechty, Janet M; Saltzman, Jaclyn A; Musaad, Salma M

    2015-08-01

    The purpose of this study was to examine associations between parental health literacy and parent attitudes about weight control strategies for young children. Parental low health literacy has been associated with poor child health outcomes, yet little is known about its relationship to child weight control and weight-related health information-seeking preferences. Data were drawn from the STRONG Kids Study, a Midwest panel survey among parents of preschool aged children (n = 497). Parents endorsed an average of 4.3 (SD =2.8) weight loss strategies, 53% endorsed all three recommended weight loss strategies for children, and fewer than 1% of parents endorsed any unsafe strategies. Parents were most likely to seek child weight loss information from healthcare professionals but those with low (vs. adequate) health literacy were significantly less likely to use the Internet or books and more likely to use minister/clergy as sources. Poisson and logistic regressions showed that higher health literacy was associated with endorsement of more strategies overall, more recommended strategies, and greater odds of endorsing each specific recommended strategy for child weight control, after adjusting for parent age, education, race/ethnicity, income, marital status, weight concern, and child BMI percentile. Findings suggest that health literacy impacts parental views about child weight loss strategies and health information-seeking preferences. Pediatric weight loss advice to parents should include assessment of parent attitudes and prior knowledge about child weight control and facilitate parent access to reliable sources of evidence-informed child weight control information. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Effect of Posture Training with Weighted Kypho-Orthosis (WKO) on Improving Balance in Women with Osteoporosis

    OpenAIRE

    Raeissadat, Seyed Ahmad; Sedighipour, Leyla; Pournajaf, Safura; Vahab Kashani, Reza; Sadeghi, Shahram

    2014-01-01

    Objectives. To determine the effect of weighted kypho-orthosis (WKO) on improving balance in women with osteoporosis. In this nonrandomized controlled clinical trial, 31 patients with osteoporosis were included. The patients were assigned to two groups: (1) control group who received 4-week home-based daily exercise program including weight bearing, back strengthening, and balance exercises and (2) intervention group (WKO) who performed aforementioned exercises and wore WKO for one hour twice...

  6. Overweight Adolescents’ Self-Perceived Weight and Weight Control Behaviour: HBSC Study in Finland 1994–2010

    Directory of Open Access Journals (Sweden)

    Kristiina Ojala

    2012-01-01

    Full Text Available Introduction. Overweight and perception of being overweight, may lead adolescent to lose weight. The aim of the present study was to investigate overweight adolescents’ self-perceived weight, body dissatisfaction, and weight control behaviour during 1994–2010 in Finland. Methods. The country-representative, cross-sectional data of 15-year olds were obtained from the Health Behaviour in School-aged Children (HBSC study, conducted in 1994 (=1194; males: 48%, 1998 (=1545; 49%, 2002 (=1745; 50%, 2006 (=1670; 47%, and 2010 (=2082; 48%. Results. The majority of overweight boys (62–69% and girls (89–100% assessed themselves as too fat, and their body image was lower than in nonoverweight adolescents. The highest prevalence of current weight controlling was found in 2006 in males (18% and in 2010 in females (39%. Conclusion. The phenomena were current and gender differences notable, but there was no statistically significant difference in overweight adolescents’ self-perceived weight, body dissatisfaction, or weight control behaviour between survey years.

  7. Adaptive Spindle Balancing Using Magnetically Levitated Bearings

    International Nuclear Information System (INIS)

    BARNEY, PATRICK S.; LAUFFER, JAMES P.; PETTEYS, REBECCA; REDMOND, JAMES M.; SULLIVAN, WILLIAM N.

    1999-01-01

    A technological break through for supporting rotating shafts is the active magnetic bearing (AMB). Active magnetic bearings offer some important advantages over conventional ball, roller or journal bearings such as reduced frictional drag, no physical contact in the bearing, no need for lubricants, compatibility with high vacuum and ultra-clean environments, and ability to control shaft position within the bearing. The disadvantages of the AMB system are the increased cost and complexity, reduced bearing stiffness and the need for a controller. Still, there are certain applications, such as high speed machining, biomedical devices, and gyroscopes, where the additional cost of an AMB system can be justified. The inherent actuator capabilities of the AMB offer the potential for active balancing of spindles and micro-shaping capabilities for machine tools, The work presented in this paper concentrates on an AMB test program that utilizes the actuator capability to dynamically balance a spindle. In this study, an unbalanced AMB spindle system was enhanced with an LMS (Least Mean Squares) algorithm combined with an existing PID (proportional, integral, differential) control. This enhanced controller significantly improved the concentricity of an intentionally unbalanced shaft. The study included dynamic system analysis, test validation, control design and simulation, as well as experimental implementation using a digital LMS controller

  8. Comparison of Findings from Oblique Radiographs of the Raised Limb with Those of the Weight-bearing Limb for Selected Diseases of the Equine Digit

    Directory of Open Access Journals (Sweden)

    J. Šterc

    2007-01-01

    Full Text Available In the present study, the radiographic examination of the distal and proximal interphalangeal joints was performed in 43 randomly selected horses. A total of 86 forelimbs were examined. On the forelimbs, dorsolateral-palmaromedial, and dorsomedial-palmarolateral oblique views were performed. The oblique views were performed on raised limbs placed in a navicular block and on weight-bearing limbs placed on a pedestal made at the equine clinic. In total, 688 dorsolateral-palmaromedial and dorsomedial-palmarolateral views were taken. During the evaluation of the radiographs we focused on the detection of signs of degenerative joint disease of the distal and proximal iterphalangeal joints, and the detection of new bone formation in the phalanx regions, not associated with a disease of the distal or proximal interphalangeal joints. Based on the radiographic signs visible on these views, we diagnosed 9 cases of degenerative joint disease of the distal intraphalangeal joint, 13 cases of the degenerative joint disease of the proximal intraphalangeal joint and 21 cases of new bone formation in the phalanx regions. These signs were observed in 253 of 688 oblique views. Positive radiographic findings of the above-mentioned disorders were shown on 127 oblique views of the raised limb placed in the navicular block and 126 oblique views of the weight-bearing limb placed on the pedestal we made. When 128 oblique views of the weight-bearing limb (placed on the pedestal were compared with those of the raised limb (in the navicular block, there were different radiographic findings in three cases only. The differences in detection rates of radiographic signs between different type views showed no statistical significance (p ≥ 0.05. Therefore we assume that the pedestal we made can be routinely used for the radiographic examination of the distal and proximal interphalangeal joints on DL-PM and DM-PL oblique views, as part of pre-purchase examination or diagnosis

  9. In control of weight: the relationship between facets of control and weight restriction.

    Science.gov (United States)

    Donovan, Caroline L; Penny, Rhiannon

    2014-01-01

    This study explored the moderating effects of body dissatisfaction (BD) on the relationships between various constructs of control and weight restricting and control behaviours (WRCBs). Participants were 167 female undergraduates who completed self-report measures of control, BD and WRCBs. It was found that higher external locus of control (LOC) was related to less dieting and exercise and that LOC was unrelated to purging. In addition, higher levels of general self-control were found to be related to higher levels of purging when BD was high but not low, and higher general self-control was associated with greater dieting and exercise behaviour. Finally, higher 'self-control as self-esteem' was strongly associated with greater dieting and exercise behaviour at both high and low levels of BD, whilst 'self-control as self-esteem' was related to purging only when BD was high. The results of this research suggest that different constructs of control have differential effects on WRCBs. The clinical implications of the findings are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Geographic structure and demographic history of Iranian brown bear (Ursus arctos based on mtDNA control region sequences

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Ashrafzadeh

    2015-12-01

    Full Text Available In recent years, the brown bear's range has declined and its populations in some areas have faced extinction. Therefore, to have a comprehensive picture of genetic diversity and geographic structure of populations is essential for effective conservation strategies. In this research, we sequenced a 271bp segment of mtDNA control region of seven Iranian brown bears, where a total dataset of 467 sequences (brown and polar bears were used in analyses. Overall, 113 different haplotypes and 77 polymorphic sites were identified within the segment. Based on phylogenetic analyses, Iranian brown bears were not nested in any other clades. The low values of Nm (range=0.014-0.187 and high values of Fst (range=0.728-0.972 among Iranian bears and others revealed a genetically significant differentiation. We aren't found any significant signal of demographic reduction in Iranian bears. The time to the most recent common ancestor of Iranian brown bears (Northern Iran was found to be around 19000 BP.

  11. Frequency weighted model predictive control of wind turbine

    DEFF Research Database (Denmark)

    Klauco, Martin; Poulsen, Niels Kjølstad; Mirzaei, Mahmood

    2013-01-01

    This work is focused on applying frequency weighted model predictive control (FMPC) on three blade horizontal axis wind turbine (HAWT). A wind turbine is a very complex, non-linear system influenced by a stochastic wind speed variation. The reduced dynamics considered in this work are the rotatio...... predictive controller are presented. Statistical comparison between frequency weighted MPC, standard MPC and baseline PI controller is shown as well.......This work is focused on applying frequency weighted model predictive control (FMPC) on three blade horizontal axis wind turbine (HAWT). A wind turbine is a very complex, non-linear system influenced by a stochastic wind speed variation. The reduced dynamics considered in this work...... are the rotational degree of freedom of the rotor and the tower for-aft movement. The MPC design is based on a receding horizon policy and a linearised model of the wind turbine. Due to the change of dynamics according to wind speed, several linearisation points must be considered and the control design adjusted...

  12. Executive function in weight loss and weight loss maintenance: a conceptual review and novel neuropsychological model of weight control.

    Science.gov (United States)

    Gettens, Katelyn M; Gorin, Amy A

    2017-10-01

    Weight loss maintenance is a complex, multifaceted process that presents a significant challenge for most individuals who lose weight. A growing body of literature indicates a strong relationship between cognitive dysfunction and excessive body weight, and suggests that a subset of high-order cognitive processes known as executive functions (EF) likely play an important role in weight management. Recent reviews cover neuropsychological correlates of weight status yet fail to address the role of executive function in the central dilemma of successful weight loss maintenance. In this paper, we provide an overview of the existing literature examining executive functions as they relate to weight status and initial weight loss. Further, we propose a novel conceptual model of the relationships between EF, initial weight loss, and weight loss maintenance, mapping specific executive functions onto strategies known to be associated with both phases of the weight control process. Implications for the development of more efficacious weight loss maintenance interventions are discussed.

  13. A leucine-supplemented diet improved protein content of skeletal muscle in young tumor-bearing rats

    Directory of Open Access Journals (Sweden)

    Gomes-Marcondes M.C.C.

    2003-01-01

    Full Text Available Cancer cachexia induces host protein wastage but the mechanisms are poorly understood. Branched-chain amino acids play a regulatory role in the modulation of both protein synthesis and degradation in host tissues. Leucine, an important amino acid in skeletal muscle, is higher oxidized in tumor-bearing animals. A leucine-supplemented diet was used to analyze the effects of Walker 256 tumor growth on body composition in young weanling Wistar rats divided into two main dietary groups: normal diet (N, 18% protein and leucine-rich diet (L, 15% protein plus 3% leucine, which were further subdivided into control (N or L or tumor-bearing (W or LW subgroups. After 12 days, the animals were sacrificed and their carcass analyzed. The tumor-bearing groups showed a decrease in body weight and fat content. Lean carcass mass was lower in the W and LW groups (W = 19.9 ± 0.6, LW = 23.1 ± 1.0 g vs N = 29.4 ± 1.3, L = 28.1 ± 1.9 g, P < 0.05. Tumor weight was similar in both tumor-bearing groups fed either diet. Western blot analysis showed that myosin protein content in gastrocnemius muscle was reduced in tumor-bearing animals (W = 0.234 ± 0.033 vs LW = 0.598 ± 0.036, N = 0.623 ± 0.062, L = 0.697 ± 0.065 arbitrary intensity, P < 0.05. Despite accelerated tumor growth, LW animals exhibited a smaller reduction in lean carcass mass and muscle myosin maintenance, suggesting that excess leucine in the diet could counteract, at least in part, the high host protein wasting in weanling tumor-bearing rats.

  14. Body Weight Perception, Unhealthy Weight Control Behaviors, and Suicidal Ideation among Korean Adolescents

    Science.gov (United States)

    Kim, Dong-Sik; Cho, Youngtae; Cho, Sung-Il; Lim, In-Sook

    2009-01-01

    Background: This study examined the mediating function of body weight perception (BWP) in the relation between body mass index (BMI) and unhealthy weight control behaviors (UWCBs; eg, fasting, using diet pills, or laxatives), and between BMI and suicidal ideation. It also explored the correlation between exposure to multiple UWCBs and suicidal…

  15. Lead-free bearing alloys for engine applications

    Science.gov (United States)

    Ratke, Lorenz; Ågren, John; Ludwig, Andreas; Tonn, Babette; Gránásy, László; Mathiesen, Ragnvald; Arnberg, Lars; Anger, Gerd; Reifenhäuser, Bernd; Lauer, Michael; Garen, Rune; Gust, Edgar

    2005-10-01

    Recent developments to reduce the fuel consumption, emission and air pollution, size and weight of engines for automotive, truck, ship propulsion and electrical power generation lead to temperature and load conditions within the engines that cannot be borne by conventional bearings. Presently, only costly multilayer bearings with electroplated or sputtered surface coatings can cope with the load/speed combinations required. Ecological considerations in recent years led to a ban by the European Commission on the use of lead in cars a problem for the standard bronze-lead bearing material. This MAP project is therefore developing an aluminium-based lead-free bearing material with sufficient hardness, wear and friction properties and good corrosion resistance. Only alloys made of components immiscible in the molten state can meet the demanding requirements. Space experimentation plays a crucial role in optimising the cast microstructure for such applications.

  16. A randomised, controlled clinical study on total hip arthroplasty using 4 different bearings

    DEFF Research Database (Denmark)

    Borgwardt, Arne; Zerahn, Bo; Fabricius, Sandra D

    2017-01-01

    PURPOSE: To compare 4 different bearings in total hip arthroplasty (THA) in a randomised controlled clinical study on clinical performance. METHODS: 393 patients with osteoarthritis of the hip or avascular necrosis were included and allocated to 1 of the head-and-cup couples zirconia...

  17. Design of Temperature Measuring Instrument of The Primary Cooling System Bearing Motor At The RSG-GAS Based on Micro controller ATMEGA 8535

    International Nuclear Information System (INIS)

    Ranji Gusman; Cahyana; Heri Suherkiman; Sukino

    2012-01-01

    Controlling on the bearing of an electric motor is the thing that important to do, to know the performance of an electric motor is staying awake. One of the parameters that can be controlled is temperature of bearing electric motor. The bearing of an electric motors has three areas of work, namely the normal working temperature area(<45 °C), working area (45-50 °C) and critical shutdown area (<50 °C). On the design of this tool-making, we are going to control the electric motor on that condition. The micro controller ATMEGA 8535 is used as a controller. Micro controller serve control the input in the form of temperature bearing motor then cultivate it and will be displayed to output devices such as the LCD viewer, lights indicators and buzzer. On this design has the design of casing, power supply circuit, micro controller port, buzzer driver circuit, indicator light and relay circuits, as well as the LCD viewer circuit and flow chart. On the next activity, the design will be submitted to the manufacturing stage. (author)

  18. Biodesulfurization of vanadium-bearing titanomagnetite concentrates and pH control of bioleaching solution

    Science.gov (United States)

    Liu, Xiao-rong; Jiang, Sheng-cai; Liu, Yan-jun; Li, Hui; Wang, Hua-jun

    2013-10-01

    Vanadium-bearing titanomagnetite concentrates were desulfurized with Acidithiobacillus ferrooxidans ( A. ferrooxidans). The sulfur content of the concentrates was reduced from 0.69wt% to 0.14wt% after bioleaching for 15 d with a 10% pulp density at 30°C. Maintaining a stable pH value during biodesulfurization was critical because of high acid consumption, resulting from a combination of nonoxidative and oxidative dissolution of pyrrhotite in acid solution. It is discovered that the citric acid-disodium hydrogen phosphate buffer of pH 2.0 can control the solution pH value smoothly in the optimal range of 2.0-3.0 for A. ferrooxidans growth. Using the buffer in the volume fraction range of 5.0%-15.0% stimulates A. ferrooxidans growth and improves the biodesulfurization efficiency. Compared with the buffer-free control case, the maximum increase of biodesulfurization rate is 29.7% using a 10.0vol% buffer. Bioleaching provides an alternative process for desulfurization of vanadium-bearing titanomagnetite ores.

  19. The effect of external dynamic loads on the lifetime of rolling element bearings: accurate measurement of the bearing behaviour

    International Nuclear Information System (INIS)

    Jacobs, W; Boonen, R; Sas, P; Moens, D

    2012-01-01

    Accurate prediction of the lifetime of rolling element bearings is a crucial step towards a reliable design of many rotating machines. Recent research emphasizes an important influence of external dynamic loads on the lifetime of bearings. However, most lifetime calculations of bearings are based on the classical ISO 281 standard, neglecting this influence. For bearings subjected to highly varying loads, this leads to inaccurate estimations of the lifetime, and therefore excessive safety factors during the design and unexpected failures during operation. This paper presents a novel test rig, developed to analyse the behaviour of rolling element bearings subjected to highly varying loads. Since bearings are very precise machine components, their motion can only be measured in an accurately controlled environment. Otherwise, noise from other components and external influences such as temperature variations will dominate the measurements. The test rig is optimised to perform accurate measurements of the bearing behaviour. Also, the test bearing is fitted in a modular structure, which guarantees precise mounting and allows testing different types and sizes of bearings. Finally, a fully controlled multi-axial static and dynamic load is imposed on the bearing, while its behaviour is monitored with capacitive proximity probes.

  20. A qualitative study of successful adolescent and young adult weight losers: implications for weight control intervention.

    Science.gov (United States)

    Jensen, Chad D; Duraccio, Kara M; Hunsaker, Sanita L; Rancourt, Diana; Kuhl, Elizabeth S; Jelalian, Elissa; Wing, Rena R

    2014-12-01

    Our study aims to provide an in-depth analysis of behavioral strategies, psychological factors, and social contributors to adolescent weight loss and weight loss maintenance among participants in the Adolescent Weight Control Registry (AWCR). Qualitative analyses were conducted using semi-structured interview data from 40 participants from the AWCR who successfully lost ≥10 lbs and maintained their weight loss for at least one year. In contrast to existing literature, our findings suggest that primary motivating factors for adolescent weight loss may be intrinsic (e.g., desire for better health, desire to improve self-worth) rather than extrinsic. In addition, life transitions (e.g., transition to high school) were identified as substantial motivators for weight-related behavior change. Peer and parental encouragement and instrumental support were widely endorsed as central to success. The most commonly endorsed weight loss maintenance strategies included attending to dietary intake and physical activity levels, and making self-corrections when necessary. Results from this study highlight considerations for future adolescent weight control treatment development.

  1. Idaho Nuclear Technology and Engineering Center Sodium-Bearing Waste Treatment Research and Development FY-2002 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Deldebbio, John Anthony; Mc Cray, John Alan; Kirkham, Robert John; Olson, Lonnie Gene; Scholes, Bradley Adams

    2002-09-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is considering several optional processes for disposal of liquid sodium-bearing waste. During fiscal year 2002, immobilization-related research included of grout formulation development for sodium-bearing waste, absorption of the waste on silica gel, and off-gas system mercury collection and breakthrough using activated carbon. Experimental results indicate that sodium-bearing waste can be immobilized in grout at 70 weight percent and onto silica gel at 74 weight percent. Furthermore, a loading of 11 weight percent mercury in sulfur-impregnated activated carbon was achieved with 99.8% off-gas mercury removal efficiency.

  2. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  3. EARLY WEIGHT-BEARING AFTER ANKLE FRACTURE FIXATION ...

    African Journals Online (AJOL)

    Background: In early 2006 during AO-scholarship training at Hadassah Hospital in Jerusalem, I witnessed ... I then determined to study and compare the functional benefit of early weight- .... (.80) of detecting an effect we used a power table. A.

  4. Trehalose Liposomes Suppress the Growth of Tumors on Human Lung Carcinoma-bearing Mice by Induction of Apoptosis In Vivo.

    Science.gov (United States)

    Ichihara, Hideaki; Kuwabara, Keiji; Matsumoto, Yoko

    2017-11-01

    Previous evidence demonstrates that trehalose liposomes (DMTreC14) composed of L-α-dimyristoylphosphatidylcholine (DMPC) and α-D-glycopyranosyl-α-D-glucopyranoside monomyristate (TreC14) inhibit proliferation and invasion on lung carcinoma (A549 cells) in vitro. Here, we aimed to investigate suppressive effects of DMTreC14 on the growth of tumor on human lung carcinoma bearing mice. DMTreC14 composed of 30 mol% DMPC and 70 mol% TreC14 were prepared by the sonication method. Anti-tumor activities of DMTreC14 using the subcutaneous and orthotopic graft-bearing mice of A549 cells were investigated in vivo. The remarkable reduction of volume and weight in subcutaneous tumors on subcutaneous lung carcinoma-bearing mice topically administrated with DMTreC14 were obtained. Apoptotic-positive cells in the subcutaneous tumor slice of subcutaneous lung carcinoma-bearing mice topically administrated with DMTreC14 were observed using TUNEL staining. Lung weights on the orthotopic graft-bearing mice of lung carcinoma intravenously administrated with DMTreC14 were markedly decreased compared to those of the control group. Remarkable decrease in dimensions of tumor area of lung on the orthotopic graft-bearing mice of lung carcinoma intravenously administrated with DMTreC14 was obtained in histological analysis using the hematoxylin and eosin staining. Remarkably high anti-tumor activities of DMTreC14 for the subcutaneous and orthotopic graft-bearing mice of lung carcinoma accompanied with apoptosis were revealed for the first time in vivo. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

  5. An application of gain-scheduled control using state-space interpolation to hydroactive gas bearings

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Camino, Juan F.; Niemann, Hans Henrik

    2016-01-01

    with a gain-scheduling strategy using state-space interpolation, which avoids both the performance loss and the increase of controller order associated to the Youla parametrisation. The proposed state-space interpolation for gain-scheduling is applied for mass imbalance rejection for a controllable gas...... bearing scheduled in two parameters. Comparisons against the Youla-based scheduling demonstrate the superiority of the state-space interpolation....

  6. The push-off test: development of a simple, reliable test of upper extremity weight-bearing capability.

    Science.gov (United States)

    Vincent, Joshua I; MacDermid, Joy C; Michlovitz, Susan L; Rafuse, Richard; Wells-Rowsell, Christina; Wong, Owen; Bisbee, Leslie

    2014-01-01

    Longitudinal clinical measurement study. The push-off test (POT) is a novel and simple measure of upper extremity weight-bearing that can be measured with a grip dynamometer. There are no published studies on the validity and reliability of the POT. The relationship between upper extremity self-report activity/participation and impairment measures remain an unexplored realm. The primary purpose of this study is to estimate the intra and inter-rater reliability and construct validity of the POT. The secondary purpose is to estimate the relationship between upper extremity self-report activity/participation questionnaires and impairment measures. A convenience sample of 22 patients with wrist or elbow injuries were tested for POT, wrist/elbow range of motion (ROM), isometric wrist extension strength (WES) and grip strength; and completed two self-report activity/participation questionnaires: Disability of the Arm, Shoulder and the Hand (DASH) and Work Limitations Questionnaire (WLQ-26). POT's inter and intra-rater reliability and construct validity was tested. Pearson's correlations were run between the impairment measures and self-report questionnaires to look into the relationship amongst them. The POT demonstrated high inter-rater reliability (ICC affected = 0.97; 95% C.I. 0.93-0.99; ICC unaffected = 0.85; 95% C.I. 0.68-0.94) and intra-rater reliability (ICC affected = 0.96; 95% C.I. 0.92-0.97; ICC unaffected = 0.92; 95% C.I. 0.85-0.97). The POT was correlated moderately with the DASH (r = -0.47; p = 0.03). While examining the relationship between upper extremity self-reported activity/participation questionnaires and impairment measures the strongest correlation was between the DASH and the POT (r = -0.47; p = 0.03) and none of the correlations with the other physical impairment measures reached significance. At-work disability demonstrated insignificant correlations with physical impairments. The POT test provides a reliable and easily

  7. EFFECT OF ACTIVE COOLING AND α-2 ADRENOCEPTOR ANTAGONISM ON CORE TEMPERATURE IN ANESTHETIZED BROWN BEARS (URSUS ARCTOS).

    Science.gov (United States)

    Ozeki, Larissa Mourad; Caulkett, Nigel; Stenhouse, Gordon; Arnemo, Jon M; Fahlman, Åsa

    2015-06-01

    Hyperthermia is a common complication during anesthesia of bears, and it can be life threatening. The objective of this study was to evaluate the effectiveness of active cooling on core body temperature for treatment of hyperthermia in anesthetized brown bears (Ursus arctos). In addition, body temperature after reversal with atipamezole was also evaluated. Twenty-five adult and subadult brown bears were captured with a combination of zolazepam-tiletamine and xylazine or medetomidine. A core temperature capsule was inserted into the bears' stomach or 15 cm into their rectum or a combination of both. In six bears with gastric temperatures≥40.0°C, an active cooling protocol was performed, and the temperature change over 30 min was analyzed. The cooling protocol consisted of enemas with 2 L of water at approximately 5°C/100 kg of body weight every 10 min, 1 L of intravenous fluids at ambient temperature, water or snow on the paws or the inguinal area, intranasal oxygen supplementation, and removing the bear from direct sunlight or providing shade. Nine bears with body temperature>39.0°C that were not cooled served as control for the treated animals. Their body temperatures were recorded for 30 min, prior to administration of reversal. At the end of the anesthetic procedure, all bears received an intramuscular dose of atipamezole. In 10 bears, deep rectal temperature change over 30 min after administration of atipamezole was evaluated. The active cooling protocol used in hyperthermic bears significantly decreased their body temperatures within 10 min, and it produced a significantly greater decrease in their temperature than that recorded in the control group.

  8. Gas Bearing Control for Safe Operation in Critical Speed Regions - Experimental Verification

    DEFF Research Database (Denmark)

    Theisen, Lukas R. S.; Niemann, Hans H.; Galeazzi, Roberto

    2015-01-01

    supported by gas bearings to extend their operating range. Using H∞-design methods, active lubrication techniques are proposed to enhance the damping, which in turn reduces the vibrations to a desired safe level. The control design is validated experimentally on a laboratory test rig, and shown to allow...... and deceleration patterns and avoidance of operation near the critical speeds, which is a limiting factor during operation, specially during run-downs. An approach for reducing the vibrations is by feedback controlled lubrication. This paper addresses the challenge of reducing vibrations in rotating machines...

  9. Plastic surgery improves long-term weight control after bariatric surgery.

    Science.gov (United States)

    Balagué, Nicolas; Combescure, Christophe; Huber, Olivier; Pittet-Cuénod, Brigitte; Modarressi, Ali

    2013-10-01

    The positive impact of Roux-en-Y gastric bypass on weight, comorbidities, and health-related quality of life is well documented. However, 50 percent of patients regain some of the lost weight after 2 years with Roux-en-Y gastric bypass and present a mean weight regain of 10 to 15 percent after several years, partially losing the previously obtained benefits. The authors hypothesize that body contouring could decrease weight regain, leading to better long-term weight control after Roux-en-Y gastric bypass. In a matched control study, variations in weight for 98 patients with body contouring after Roux-en-Y gastric bypass were compared with those of 102 matched control patients with Roux-en-Y gastric bypass alone. Data were collected prospectively at 1, 3, 6, 9, 12, and 18 months after Roux-en-Y gastric bypass and then yearly until 7 years. After a massive mean weight loss of 45.2 kg during the first 2 years after Roux-en-Y gastric bypass, patients with Roux-en-Y gastric bypass alone presented a higher continuous mean weight regain than those with Roux-en-Y gastric bypass and body contouring (1.78 kg/year versus 0.51 kg/year of weight regain, respectively; p = 0.001). After 7 years, patients with Roux-en-Y gastric bypass presented significantly higher mean weight regain than patients with Roux-en-Y gastric bypass and body contouring (i.e., 10.8 percent versus 3.6 percent mean weight gain, respectively; p weight of 2.04 kg by body contouring, the weight regain was 22.9 kg for patients with Roux-en-Y gastric bypass alone and only 6.2 kg for those with Roux-en-Y gastric bypass and body contouring. The authors demonstrated that patients with body contouring present better long-term weight control after Roux-en-Y gastric bypass. Therefore, body contouring must be considered as a reconstructive operation in the treatment of morbid obesity. Therapeutic, III.

  10. Overestimation of own body weights in female university students: associations with lifestyles, weight control behaviors and depression.

    Science.gov (United States)

    Kim, Miso; Lee, Hongmie

    2010-12-01

    The study aimed to analyze the lifestyles, weight control behavior, dietary habits, and depression of female university students. The subjects were 532 students from 8 universities located in 4 provinces in Korea. According to percent ideal body weight, 33 (6.4%), 181 (34.0%), 283 (53.2%), 22 (4.1%) and 13 (2.5%) were severely underweight, underweight, normal, overweight and obese, respectively, based on self-reported height and weight. As much as 64.1% and only 2.4%, respectively, overestimated and underestimated their body weight status. Six overweight subjects were excluded from overestimation group for the purpose of this study, resulting in overestimation group consisting of only underweight and normal weight subjects. Compared to those from the normal perception group, significantly more subjects from the overestimation group were currently smoking (P = 0.017) and drank more often than once a week (P = 0.015), without any significant differences in dietary habits. Despite similar BMIs, subjects who overestimated their own weight statuses had significantly higher weight dissatisfaction (P = 0.000), obesity stress (P = 0.000), obsession to lose weight (P = 0.007) and depression (P = 0.018). Also, more of them wanted to lose weight (P = 0.000), checked their body weights more often than once a week (P = 0.025) and had dieting experiences using 'reducing meal size' (P = 0.012), 'reducing snacks' (P = 0.042) and 'taking prescribed pills' (P = 0.032), and presented 'for a wider range of clothes selection' as the reason for weight loss (P = 0.039), although none was actually overweight or obese. Unlike the case with overestimating one's own weight, being overweight was associated with less drinking (P = 0.035) and exercising more often (P = 0.001) and for longer (P = 0.001) and healthier reasons for weight control (P = 0.002), despite no differences in frequency of weighing and depression. The results showed that weight overestimation, independent of weight status

  11. Use of probabilistic weights to enhance linear regression myoelectric control.

    Science.gov (United States)

    Smith, Lauren H; Kuiken, Todd A; Hargrove, Levi J

    2015-12-01

    Clinically available prostheses for transradial amputees do not allow simultaneous myoelectric control of degrees of freedom (DOFs). Linear regression methods can provide simultaneous myoelectric control, but frequently also result in difficulty with isolating individual DOFs when desired. This study evaluated the potential of using probabilistic estimates of categories of gross prosthesis movement, which are commonly used in classification-based myoelectric control, to enhance linear regression myoelectric control. Gaussian models were fit to electromyogram (EMG) feature distributions for three movement classes at each DOF (no movement, or movement in either direction) and used to weight the output of linear regression models by the probability that the user intended the movement. Eight able-bodied and two transradial amputee subjects worked in a virtual Fitts' law task to evaluate differences in controllability between linear regression and probability-weighted regression for an intramuscular EMG-based three-DOF wrist and hand system. Real-time and offline analyses in able-bodied subjects demonstrated that probability weighting improved performance during single-DOF tasks (p linear regression control. Use of probability weights can improve the ability to isolate individual during linear regression myoelectric control, while maintaining the ability to simultaneously control multiple DOFs.

  12. Positive and negative dimensions of weight control motivation.

    Science.gov (United States)

    Stotland, S; Larocque, M; Sadikaj, G

    2012-01-01

    This study examined weight control motivation among patients (N=5460 females and 547 males) who sought weight loss treatment with family physicians. An eight-item measure assessed the frequency of thoughts and feelings related to weight control "outcome" (e.g. expected physical and psychological benefits) and "process" (e.g. resentment and doubt). Factor analysis supported the existence of two factors, labeled Positive and Negative motivation. Positive motivation was high (average frequency of thoughts about benefits was 'every day') and stable throughout treatment, while Negative motivation declined rapidly and then stabilized. The determinants of changes in the Positive and Negative dimensions during treatment were examined within 3 time frames: first month, months 2-6, and 6-12. Maintenance of high scores on Positive motivation was associated with higher BMI and more disturbed eating habits. Early reductions in Negative motivation were greater for those starting treatment with higher weight and more disturbed eating habits, but less depression and stress, while later reductions in Negative motivation were predicted by improvements in eating habits, weight, stress and perfectionism. Clinicians treating obesity should be sensitive to fluctuations in both motivational dimensions, as they are likely to play a central role in determining long-term behavior and weight change. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Foothills model forest grizzly bear study : project update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    This report updates a five year study launched in 1999 to ensure the continued healthy existence of grizzly bears in west-central Alberta by integrating their needs into land management decisions. The objective was to gather better information and to develop computer-based maps and models regarding grizzly bear migration, habitat use and response to human activities. The study area covers 9,700 square km in west-central Alberta where 66 to 147 grizzly bears exist. During the first 3 field seasons, researchers captured and radio collared 60 bears. Researchers at the University of Calgary used remote sensing tools and satellite images to develop grizzly bear habitat maps. Collaborators at the University of Washington used trained dogs to find bear scat which was analyzed for DNA, stress levels and reproductive hormones. Resource Selection Function models are being developed by researchers at the University of Alberta to identify bear locations and to see how habitat is influenced by vegetation cover and oil, gas, forestry and mining activities. The health of the bears is being studied by researchers at the University of Saskatchewan and the Canadian Cooperative Wildlife Health Centre. The study has already advanced the scientific knowledge of grizzly bear behaviour. Preliminary results indicate that grizzlies continue to find mates, reproduce and gain weight and establish dens. These are all good indicators of a healthy population. Most bear deaths have been related to poaching. The study will continue for another two years. 1 fig.

  14. Possible conservation units of the sun bear (Helarctos malayanus) in Sarawak based on variation of mtDNA control region.

    Science.gov (United States)

    Onuma, Manabu; Suzuki, Masatsugu; Ohtaishi, Noriyuki

    2006-11-01

    The mitochondrial DNA control region of the sun bear (Helarctos malayanus) was sequenced using 21 DNA samples collected from confiscated sun bears to identify conservation units, such as evolutionarily significant units and management units, in Sarawak, Borneo Island. A total of 10 haplotypes were observed, indicating the presence of at least two lineages in the sun bear population in Sarawak. Presumably, these two lineages could represent evolutionarily significant units. However, the geographical distributions of the two lineages remained unknown due to the lack of information regarding the exact capture locations of the confiscated sun bears. It is essential to elucidate the geographical distributions of these lineages in order to create a proper conservation plan for the sun bears in Sarawak. Therefore, further studies examining the haplotype distributions using DNA samples from known localities are essential.

  15. Clinic-based assessment of weight-bearing asymmetry during squatting in people with anterior cruciate ligament reconstruction using Nintendo Wii Balance Boards.

    Science.gov (United States)

    Clark, Ross A; Howells, Brooke; Feller, Julian; Whitehead, Tim; Webster, Kate E

    2014-06-01

    To use low-cost Nintendo Wii Balance Boards (NWBB) to assess weight-bearing asymmetry (WBA) in people who have undergone anterior cruciate ligament reconstruction (ACLR), and to compare their results with a matched control group. Quantitative clinical study using a cross-sectional design. Orthopedic clinic of a private hospital. ACLR participants (n=41; mean age ± SD, 26.0 ± 9.8 y; current Cincinnati sports activity level, 75.3 ± 19.8) performed testing in conjunction with their routine 6- or 12-month clinical follow-up, and a control group (n=41) was matched for age, height, body mass, and physical activity level. Participants performed double-limb squats while standing on 2 NWBBs, 1 under each foot. The WBA variables mean mass difference as a percentage of body mass, time favoring a single limb by >5% body mass, absolute symmetry index, and symmetry index relative to the operated or matched control limb were derived. Mann-Whitney U tests were performed to assess between-group differences. Significant (P<.05) increases in asymmetry in the ACLR group were found for all outcome measures except symmetry index relative to the operated limb. People who have undergone ACLR are likely to possess WBA during squats, and this can be assessed using low-cost NWBBs in a clinical setting. Interestingly, the observed asymmetry was not specific to the surgical limb. Future research is needed to assess the relationship between WBA early in the rehabilitation process and long-term outcomes. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  16. Four Weeks in a Single-Leg Weight-Bearing Hip Spica Cast is Sufficient Treatment for Isolated Femoral Shaft Fractures in Children Aged 1 to 3 Years.

    Science.gov (United States)

    Jaafar, Sami; Sobh, Ali; Legakis, Julie E; Thomas, Ronald; Buhler, Kelsey; Jones, Eric T

    2016-01-01

    Hip spica casting regimens for the treatment of femoral shaft fractures in a pediatric population aged 1 to 3 years vary. Patient charts were reviewed to determine if there are any clinical differences between 3 and 4 weeks in an ambulatory single-leg hip spica (SLHS) cast versus 6 to 8 weeks in a standard double-leg, non-weight-bearing hip spica cast. The medical records of 109 patients with femoral shaft fractures treated with a hip spica casting from January 1, 2008 to December 31, 2011 were examined. After exclusions, 94 patients were eligible for inclusion in the study. Patient records were assessed, noting age, weight, type of cast, time in cast, and complications. All casts were applied by senior pediatric orthopaedic surgeons at a single institution. Two groups were evaluated: 59 patients in the SLHS group and 35 in the double-leg hip spica group. The 2 groups were demographically similar with an average age of 2 years, 70.2% of patients were male, 45.7% were black, and 35.1% were white. The average time to cast removal was 4.1 weeks for the single-leg group and 5.3 weeks for the double-leg group (Pshaft fractures in patients less than 4 years old can be treated in a weight-bearing SLHS casts for approximately 4 weeks with fewer alignment and skin complications. Level III-clinical retrospective comparative study.

  17. Creatine supplementation prevents hyperhomocysteinemia, oxidative stress and cancer-induced cachexia progression in Walker-256 tumor-bearing rats.

    Science.gov (United States)

    Deminice, Rafael; Cella, Paola Sanches; Padilha, Camila S; Borges, Fernando H; da Silva, Lilian Eslaine Costa Mendes; Campos-Ferraz, Patrícia L; Jordao, Alceu Afonso; Robinson, Jason Lorne; Bertolo, Robert F; Cecchini, Rubens; Guarnier, Flávia Alessandra

    2016-08-01

    The purpose of this study was to investigate (1) the impact of tumor growth on homocysteine (Hcy) metabolism, liver oxidative stress and cancer cachexia and, (2) the potential benefits of creatine supplementation in Walker-256 tumor-bearing rats. Three experiments were conducted. First, rats were killed on days 5 (D5), 10 (D10) and 14 (D14) after tumor implantation. In experiment 2, rats were randomly assigned to three groups designated as control (C), tumor-bearing (T) and tumor-bearing supplemented with creatine (TCr). A life span experiment was conducted as the third experiment. Creatine was supplied in drinking water for 21 days (8 g/L) in all cases. Tumor implantation consisted of a suspension of Walker-256 cells (8.0 × 10(7) cells in 0.5 mL of PBS). The progressive increase (P creatine supplementation promoted a 28 % reduction of tumor weight (P Creatine supplementation was unable to decrease Hcy concentration and to increase SAM/SAH ratio in tumor tissue. These data suggest that creatine effects on hepatic impaired Hcy metabolism promoted by tumor cell inoculation are responsible to decrease plasma Hcy in tumor-bearing rats. In conclusion, Walker-256 tumor growth is associated with progressive hyperhomocysteinemia, body weight loss and liver oxidative stress in rats. Creatine supplementation, however, prevented these tumor-associated perturbations.

  18. Comprehensive entropy weight observability-controllability risk ...

    African Journals Online (AJOL)

    Decision making for water resource planning is often related to social, economic and environmental factors. There are various methods for making decisions about water resource planning alternatives and measures with various shortcomings. A comprehensive entropy weight observability-controllability risk analysis ...

  19. Access Request Trustworthiness in Weighted Access Control Framework

    Institute of Scientific and Technical Information of China (English)

    WANG Lun-wei; LIAO Xiang-ke; WANG Huai-min

    2005-01-01

    Weighted factor is given to access control policies to express the importance of policy and its effect on access control decision. According to this weighted access control framework, a trustworthiness model for access request is also given. In this model, we give the measure of trustworthiness factor to access request, by using some idea of uncertainty reasoning of expert system, present and prove the parallel propagation formula of request trustworthiness factor among multiple policies, and get the final trustworthiness factor to decide whether authorizing. In this model, authorization decision is given according to the calculation of request trustworthiness factor, which is more understandable, more suitable for real requirement and more powerful for security enhancement than traditional methods. Meanwhile the finer access control granularity is another advantage.

  20. A new hybrid observer based rotor imbalance vibration control via passive autobalancer and active bearing actuation

    Science.gov (United States)

    Jung, DaeYi; DeSmidt, Hans

    2018-02-01

    Many researchers have explored the use of active bearings, such as non-contact Active Magnetic Bearings (AMB), to control imbalance vibration in rotor systems. Meanwhile, the advantages of a passive Auto-balancer device (ABD) eliminating the imbalance effect of rotor without using other active means have been recently studied. This paper develops a new hybrid imbalance vibration control approach for an ABD-rotor system supported by a normal passive bearing in augmented with an AMB to enhance the balancing and vibration isolation capabilities. Essentially, an ABD consists of several freely moving eccentric balancing masses mounted on the rotor, which, at supercritical operating speeds, act to cancel the rotor's imbalance at steady-state. However, due to the inherent nonlinearity of the ABD, the potential for other, non-synchronous limit-cycle behavior exists resulting in increased rotor vibration. To address this, the algorithm of proposed hybrid control is designed to guarantee globally asymptotic stability of the synchronous balanced condition. This algorithm also incorporates with a "Luenberger-like" observer that continuously estimates the states of a balancer ball circulating around within ABD. In particular, it is shown that the balanced equilibrium can be made globally attractive under the hybrid control strategy, and that the control power levels of AMB are significantly reduced via the addition of the ABD because the control is designed such that it is only switched on for the abnormal operation of ABD and will be disengaged otherwise. Moreover, unlike other imbalance vibration control applications based upon ABD such as rotor speed regulator [21,22], this approach enables the controller to achieve the desirable performance without altering rotor speed once the rotor initially reaches the target speed. These applications are relevant to limited power applications such as in satellite reaction wheels, flywheel energy storage batteries or CD-ROM application.

  1. Feedback-Controlled Lubrication for Reducing the Lateral Vibration of Flexible Rotors supported by Tilting-Pad Journal Bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2014-01-01

    In this work, the feedback-controlled lubrication regime, based on a model-free designed proportional-derivative (PD) controller, is studied and experimentally tested in a flexible rotor mounted on an actively-lubricated tilting-pad journal bearing (active TPJB). With such a lubrication regime...... to experimentally characterized multi-input multi-output systems is used to determine the stabilizing PD gain domain. The main contribution of this work is to demonstrate the enhancement of the dynamic response of a flexible rotor-bearing system supported by an active TPJB by means of the feedback...... are used as actuators and the flexible rotor lateral movements as feedback control signals. To synthesise the PD controller gains an objective function is optimized in the stabilizing gain domain and then chosen from a subdomain imposed by the servovalves restrictions. The D-decomposition approach expanded...

  2. No difference in terms of radiostereometric analysis between fixed- and mobile-bearing total knee arthroplasty: a randomized, single-blind, controlled trial.

    Science.gov (United States)

    Schotanus, M G M; Pilot, P; Kaptein, B L; Draijer, W F; Tilman, P B J; Vos, R; Kort, N P

    2017-09-01

    A concern that arises with any new prosthesis is whether it will achieve satisfactory long-term implant stability. The gold standard of assessing the quality of fixation in a new or relatively new implant is to undertake a randomized controlled trial using radiostereometric analysis. It was hypothesized that both mobile-bearing total knee arthroplasty and fixed-bearing total knee arthroplasty have comparable migration patterns at 2-year follow-up. This study investigated two types of cemented total knee arthroplasty, the mobile- or fixed-bearing variant from the same family with use of radiostereometric analysis. This prospective, patient-blinded, randomized, controlled trial was designed to investigate early migration of the tibia component after two years of follow-up with use of radiostereometric analysis. A total of 50 patients were randomized to receive a mobile- or fixed-bearing TKA from the same family. Patients were evaluated during 2-year follow-up, including radiostereometric analysis, physical and clinical examination and patient reported outcome measures (PROMs). At two-year follow-up, the mean (±SD) maximum total point motion (MTPM) in the fixed-bearing group was 0.82 (±1.16) versus 0.92 mm (±0.64) in the mobile-bearing group (p = n.s) with the largest migration seen during the first 6 weeks (0.45 ± 0.32 vs. 0.54 ± 0.30). The clinical outcome and PROMs significantly improved within each group, not between both groups. Measuring early micromotion is useful for predicting clinical loosening that can lead to revision. The results of this study demonstrate that early migration of the mobile-bearing is similar to that of the fixed-bearing component at two years and was mainly seen in the first weeks after implantation. Randomized, single-blind, controlled trial, Level I.

  3. A study on synchronously whirling motion of hydrodynamic journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2001-01-01

    In this paper, a control algorithm which is synchronously excitation the bearing with whirl speed of rotor is employed to suppress the whirl instability and unbalance response of the rotor-bearing system. Also, the cavitation algorithm implementing the Jakobsson-Floberg-Olsson boundary condition is adopted to predict cavitation regions in the fluid film more accurately than a conventional analysis with the Renolds condition. The stabilities and unbalance responses of the rotor-bearing system are investigated for various control gains and phase differences between the bearing and journal motion. It is shown that the unbalance response of the system can be greatly improved by synchronous control of the bearing, and there is an optimum phase difference, which gives the minimum unbalance response of the system, for given operating condition. It is also found that the onset speed of the instability can be greatly increased by synchronous control of the bearing

  4. A study on synchronously whirling motion of hydrodynamic journal bearings

    Energy Technology Data Exchange (ETDEWEB)

    Rho, Byoung Hoo; Kim, Kyung Woong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2001-09-01

    In this paper, a control algorithm which is synchronously excitation the bearing with whirl speed of rotor is employed to suppress the whirl instability and unbalance response of the rotor-bearing system. Also, the cavitation algorithm implementing the Jakobsson-Floberg-Olsson boundary condition is adopted to predict cavitation regions in the fluid film more accurately than a conventional analysis with the Renolds condition. The stabilities and unbalance responses of the rotor-bearing system are investigated for various control gains and phase differences between the bearing and journal motion. It is shown that the unbalance response of the system can be greatly improved by synchronous control of the bearing, and there is an optimum phase difference, which gives the minimum unbalance response of the system, for given operating condition. It is also found that the onset speed of the instability can be greatly increased by synchronous control of the bearing.

  5. Joint distraction and movement for repair of articular cartilage in a rabbit model with subsequent weight-bearing.

    Science.gov (United States)

    Nishino, T; Chang, F; Ishii, T; Yanai, T; Mishima, H; Ochiai, N

    2010-07-01

    We have previously shown that joint distraction and movement with a hinged external fixation device for 12 weeks was useful for repairing a large articular cartilage defect in a rabbit model. We have now investigated the results after six months and one year. The device was applied to 16 rabbits who underwent resection of the articular cartilage and subchondral bone from the entire tibial plateau. In group A (nine rabbits) the device was applied for six months. In group B (seven rabbits) it was in place for six months, after which it was removed and the animals were allowed to move freely for an additional six months. The cartilage remained sound in all rabbits. The areas of type II collagen-positive staining and repaired soft tissue were larger in group B than in group A. These findings provide evidence of long-term persistence of repaired cartilage with this technique and that weight-bearing has a positive effect on the quality of the cartilage.

  6. Temporal Trends and Future Predictions of Mercury Concentrations in Northwest Greenland Polar Bear (Ursus maritimus) Hair

    DEFF Research Database (Denmark)

    Dietz, Rune; Born, E.W.; Riget, Frank Farsø

    2011-01-01

    -2008 concentrations ofHg in Northwest Greenland polar bear hair exceeded the general guideline values of 20-30 μg/g dry weight for terrestrial wildlife, whereas the neurochemical effect level of 5.4 μg Hg/g dry weight proposed for East Greenland polar bears was exceeded in 93.5% of the cases. These results call......Hair samples from 117 Northwest Greenland polar bears (Ursus maritimus) were taken during 1892-2008 and analyzed for total mercury (hereafterHg). The sample represented 28 independent years and the aim of the study was to analyze for temporal Hg trends. Mercury concentrations showed yearly...

  7. Space Station alpha joint bearing

    Science.gov (United States)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  8. Distribution of copper-64 in control mice and in mice bearing ascitic Krebs tumor cells

    International Nuclear Information System (INIS)

    Apelgot, S.; Coppey, J.; Grisvard, J.; Guille, E.; Sissoeeff, I.

    1981-01-01

    Three to 20 hr after an i.p. injection of 64 Cu (half-life, 12.8 hr) into mice bearing Krebs ascites cells, a high amount of the radioisotope was recovered in the ascites cells themselves. In the control group, the radioisotope was mainly present in the liver. Similar amounts of 64 Cu were recovered in regenerating as well as in normal liver, whereas in the liver of mice bearing ascites cells, this amount was lower by 40 to 50% regardless of the ascitic volume. Thus, the copper metabolism seems to be disturbed at the hepatic level in mice bearing ascites cells. The distribution of 64 Cu was 'analyzed in DNA, RNA, and proteins from cellular lysates fractionated by CsCl gradient. There was a uniform pattern of distribution in the macromolecules from ascites cells, while 64 Cu' was preferentially associated with the protein fraction from liver. Further experiments indicated that, in vivo, 64 Cu was bound to the DNA of ascites cells

  9. Health Assessment of Cooling Fan Bearings Using Wavelet-Based Filtering

    Directory of Open Access Journals (Sweden)

    Qiang Miao

    2012-12-01

    Full Text Available As commonly used forced convection air cooling devices in electronics, cooling fans are crucial for guaranteeing the reliability of electronic systems. In a cooling fan assembly, fan bearing failure is a major failure mode that causes excessive vibration, noise, reduction in rotation speed, locked rotor, failure to start, and other problems; therefore, it is necessary to conduct research on the health assessment of cooling fan bearings. This paper presents a vibration-based fan bearing health evaluation method using comblet filtering and exponentially weighted moving average. A new health condition indicator (HCI for fan bearing degradation assessment is proposed. In order to collect the vibration data for validation of the proposed method, a cooling fan accelerated life test was conducted to simulate the lubricant starvation of fan bearings. A comparison between the proposed method and methods in previous studies (i.e., root mean square, kurtosis, and fault growth parameter was carried out to assess the performance of the HCI. The analysis results suggest that the HCI can identify incipient fan bearing failures and describe the bearing degradation process. Overall, the work presented in this paper provides a promising method for fan bearing health evaluation and prognosis.

  10. Intravenous maternal -arginine administration to twin-bearing ewes during late pregnancy enhances placental growth and development.

    Science.gov (United States)

    van der Linden, D S; Sciascia, Q; Sales, F; Wards, N J; Oliver, M H; McCoard, S A

    2015-10-01

    This study aimed to investigate if intravenous maternal Arg administration to well-fed twin-bearing ewes, from 100 to 140 d of gestation or birth, could enhance placental development and placental nutrient transport. Ewes received intravenous infusions of saline (control) or 345 μmol Arg HCl/kg of BW 3 times daily from d 100 of pregnancy (P100) to d 140 of pregnancy (P140; cohort 1) or from P100 to birth (cohort 2). At P140, ewes in cohort 1 were euthanized and individual placentae per fetus were dissected and placentomes were classed per type (A to D) and size (light to heavy). Placentome number and individual weight were recorded. As an indicator of placental nutrient transport, blood plasma was collected from the uterine ovarian vein (UOV), uterine artery (UA), and umbilical vein and artery at the time of euthanasia and analyzed for metabolites and free AA concentrations. The ewes in cohort 2 were allowed to lamb and lambs were weighed at birth. The expelled placenta was dissected and number of cotyledons and weights of total cotyledons, remaining fetal membranes, and total placenta were recorded. At P140, Arg-infused ewes had a 63% ( = 0.03) greater number of unoccupied caruncles than control ewes. No differences were observed for placental weight at P140. At birth, lambs from Arg-infused ewes tended to have 11% ( = 0.09) greater placental weight and 34% ( = 0.03) greater total cotyledon weight compared with control lambs. Arginine-infused ewes (Arg-infused) had increased concentrations of Arg ( = 0.0001) and ornithine (Orn; = 0.004) but decreased concentrations of Met ( = 0.01) and His ( = 0.02 and = 0.09, respectively) compared with control ewes in plasma UOV and UA. Fetuses from Arg-infused ewes had increased concentrations of Orn ( = 0.005) and decreased concentrations of His ( = 0.006), Met ( = 0.003), and Lys ( = 0.01) but no differences in Arg ( > 0.10) concentrations were found compared with control fetuses in umbilical artery and vein plasma. This

  11. Fabrication of cermet bearings for the control system of a high temperature lithium cooled nuclear reactor

    Science.gov (United States)

    Yacobucci, H. G.; Heestand, R. L.; Kizer, D. E.

    1973-01-01

    The techniques used to fabricate cermet bearings for the fueled control drums of a liquid metal cooled reference-design reactor concept are presented. The bearings were designed for operation in lithium for as long as 5 years at temperatures to 1205 C. Two sets of bearings were fabricated from a hafnium carbide - 8-wt. % molybdenum - 2-wt. % niobium carbide cermet, and two sets were fabricated from a hafnium nitride - 10-wt. % tungsten cermet. Procedures were developed for synthesizing the material in high purity inert-atmosphere glove boxes to minimize oxygen content in order to enhance corrosion resistance. Techniques were developed for pressing cylindrical billets to conserve materials and to reduce machining requirements. Finishing was accomplished by a combination of diamond grinding, electrodischarge machining, and diamond lapping. Samples were characterized in respect to composition, impurity level, lattice parameter, microstructure and density.

  12. Experimental Investigations of Decentralised Control Design for The Stabilisation of Rotor-Gas Bearings

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Galeazzi, Roberto; Niemann, Hans Henrik

    2015-01-01

    frequencies. Active lubrication of the journal during operations could enhance the damping and stabilisation characteristics of the sytems, and this could be achieved by means of stabilising controllers. This paper investigates the feasibility of using reduced order models obtained through Grey......-Box identification for the design of stabilising controllers, capable of enabling the active lubrication of the journal. The root locus analysis shows that two different control solutions are feasible for the dampening of the first two eigenfrequencies of the rotor-gas bearing in the horizontal and vertical...... directions. Hardening and softening P-lead controllers are designed based on the models experimentally identified, and salient features of both controllers are discussed. Both controllers are implemented and validated on the physical test rig. Experimental results confirm the validity of the proposed...

  13. Bears and pipeline construction in Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Follmann, E.H.; Hechtel, J.L. (Univ. of Alaska Fairbanks, AK (USA))

    1990-06-01

    Serious problems were encountered with bears during construction of the 1274-km trans-Alaska oil pipeline between Prudhoe Bay and Valdez. This multi-billion-dollar project traversed both black bear (Ursus americanus Pallas) and grizzly bear (U. arctos L.) habitat throughtout its entire length. Plans for dealing with anticipated problems with bears were often inadequate. Most (71%) problems occurred north of the Yukon River in a previously roadless wilderness where inadequate refuse disposal and widespread animal feeding created dangerous situations. Of the 192 officially reported bear problems associated with the Trans-Alaska Pipeline System (TAPS) (1971-1979), about 65% involved the presence of bears in camps or dumps, 13% the feeding of bears on garbage or handouts, 10% property damage or economic loss, 7% bears under and in buildings, and only 5% charges by bears. Remarkably, no bear-related injuries were reported, suggesting that bears became accustomed to people and did not regard them as a threat. Following construction of the TAPS there have been proposals for pipelines to transport natural gas from Prudhoe Bay to southern and Pacific-rim markets. Based on past experience, some animal control measures were developed during the planning phase for the authorized gas pipeline route in Alaska. Fences installed around 100-person survey camps were found to be effective in deterring bears in two traditionally troublesome areas. 16 refs., 7 figs., 1 tab.

  14. Lipidomic profiling of di- and tri-acylglycerol species in weight-controlled mice.

    Directory of Open Access Journals (Sweden)

    Brenee S King

    Full Text Available Weight control by dietary calorie restriction (DCR or exercise has been shown to prevent cancer in various models. However, the mechanisms as to how weight control is beneficial are not well understood. While previous reports have investigated the effects of weight control on total lipid levels or lipid composition within cellular membranes, there has been little work surrounding changes to individual lipids following weight control interventions. In this study, using a model of skin carcinogenesis centered on the tumor promotion stage, CD-1 mice were randomly assigned into 4 groups: ad libitum and sedentary (control, ad libitum with exercise (AL+Exe, exercise with pair feeding of a diet isocaloric with control (PF+Exe, and sedentary with 20% DCR compared to control. After ten weeks, body weight and body fat percentages significantly decreased in the PF+Exe and DCR groups but not AL+Exe when compared with sedentary controls. Murine skin and plasma samples were obtained for analysis. Lipidomics using electrospray ionization MS/MS was employed to profile triacylglycerol (TG and diacylglycerol (DG species. Both plasma and tissue TG species containing fatty acid chains with length 18:1 were significantly decreased following DCR when compared to sedentary control animals. In regards to DG, the most significant changes occurred in the plasma. DG species containing fatty acids with lengths 16:1 or 18:1 were significantly decreased in PF+Exe and DCR groups when compared to sedentary controls. Due to the significant role of TG in energy storage and DG in cellular signaling, our findings of the effects of weight control on individual TG and DG species in plasma and skin tissue following exposure to a tumor promoter, may provide insight into the mechanism of weight control on cancer prevention.

  15. Family Food Choices: A Guide to Weight and Diabetes Control.

    Science.gov (United States)

    Indian Health Service (PHS/HSA), Rockville, MD.

    Written for American Indians who have diabetes, this folder explains diabetes and outlines a weight control program and diet. The folder discusses the five things diabetics can do to help control their disease: lose weight, watch the amount and kind of fat eaten, eat more food with fiber, avoid sugar, and avoid alcohol. Charts for foods containing…

  16. Pronounced expression of the lipolytic inhibitor G0/G1 Switch Gene 2 (G0S2) in adipose tissue from brown bears (Ursus arctos) prior to hibernation

    DEFF Research Database (Denmark)

    Jessen, Niels; Nielsen, Thomas S; Vendelbo, Mikkel H

    2016-01-01

    Prior to hibernation, the brown bear (Ursus arctos) exhibits unparalleled weight gain. Unlike humans, weight gain in bears is associated with lower levels of circulating free fatty acids (FFA) and increased insulin sensitivity. Understanding how free-ranging brown bears suppress lipolysis when...... gaining weight may therefore provide novel insight toward the development of human therapies. Blood and subcutaneous adipose tissue were collected from immobilized free-ranging brown bears (fitted with GPS-collars) during hibernation in winter and from the same bears during the active period in summer...... in Dalarna, Sweden. The expression of lipid droplet-associated proteins in adipose tissue was examined under the hypothesis that bears suppress lipolysis during summer while gaining weight by increased expression of negative regulators of lipolysis. Adipose triglyceride lipase (ATGL) expression did...

  17. Migration and clinical outcome of mobile-bearing versus fixed-bearing single-radius total knee arthroplasty : A randomized controlled trial

    NARCIS (Netherlands)

    Van Hamersveld, Koen T.; Marang-Van De Mheen, Perla J.; Van Der Heide, Huub J.L.; Van Der Linden-Van Der Zwaag, Henrica M.J.; Valstar, E.R.; Nelissen, R.G.H.H.

    2018-01-01

    Background and purpose — Mobile-bearing total knee prostheses (TKPs) were developed in the 1970s in an attempt to increase function and improve implant longevity. However, modern fixed-bearing designs like the single-radius TKP may provide similar advantages. We compared tibial component

  18. From Hybrid to Actively-Controlled Gas Lubricated Bearings – Theory and Experiment

    DEFF Research Database (Denmark)

    Morosi, Stefano

    bearings, tilting pad and flexure pivot gas bearings. These solutions proved to be effective in improving static and dynamic properties of the bearings, however issues related to the manufacturing and accuracy of predictions has so far limited their applications. Another drawback is that passive bearings......-rig are backed by a comprehensive mathematical model that couples a finite element model of a flexible rotor, a thermohydrodynamic model based on a modified form of the Reynold’s equation for hybrid aerostatic-aerodynamic lubrication of compressible fluid, a piezoelectric injection system and a proportional...

  19. Bearing system

    Science.gov (United States)

    Kapich, Davorin D.

    1987-01-01

    A bearing system includes backup bearings for supporting a rotating shaft upon failure of primary bearings. In the preferred embodiment, the backup bearings are rolling element bearings having their rolling elements disposed out of contact with their associated respective inner races during normal functioning of the primary bearings. Displacement detection sensors are provided for detecting displacement of the shaft upon failure of the primary bearings. Upon detection of the failure of the primary bearings, the rolling elements and inner races of the backup bearings are brought into mutual contact by axial displacement of the shaft.

  20. Effect of colloid (Androcoll-Bear, Percoll, and PureSperm) selection on the freezability of brown bear (Ursus arctos) sperm.

    Science.gov (United States)

    Álvarez-Rodríguez, M; Álvarez, M; Anel-López, L; López-Urueña, E; Manrique, P; Borragán, S; Morrell, J M; de Paz, P; Anel, L

    2016-04-01

    The development of a species-specific conservation protocol that involves artificial insemination with frozen semen needs to validate an effective methodology for freezing semen. Colloid centrifugation has been suggested and widely applied as an effective tool for selecting animal spermatozoa for artificial breeding. The objective of the present study was to compare different methods of centrifugation, single layer using Androcoll-Bear and Percoll and double layer using PureSperm 100 (in two different discontinuous gradients 40%-80% and 45%-90%), for the selection of fresh brown bear sperm samples. In the before freezing group, all selected samples showed a higher progressive motility and viability (except Percoll for motility 43.0 ± 5.3 [P Bear in number of damaged acrosomes, different relative to the control (control, 5.3 ± 0.6; PureSperm 80, 2.0 ± 0.3; Androcoll, 2.1 ± 0.9 [P Bear constitutes a useful tool for handling of brown bear ejaculates owing to its simple handling and procedure with a reliable sperm selection and freezability. This colloid yielded an improvement in several sperm parameters in brown bear frozen-thawed semen; the selected spermatozoa of fresh samples with this colloid showed a better resistance to freezing compared with the control sample not only for motility but also for viability. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. New chopper control at ILL

    Energy Technology Data Exchange (ETDEWEB)

    Descamps, F [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    Proper phasing is an essential characteristic of the chopper systems used at ILL. A wide variety of choppers and selectors differing in weight, speed and bearing types are controlled by a unique electronic card performing digital adaptative filtering. The chopper regulation system is described. (author).

  2. Development of ball bearing in high temperature water for in-vessel type control rod drive mechanism of advanced marine reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nunokawa, Hiroshi [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Yoritsune, Tsutomu; Imayoshi, Shou; Ochiai, Masa-aki; Ishida, Toshihisa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kasahara, Yoshiyuki [Advanced Reactor Technology Co., Ltd., Tokyo (Japan)

    2001-06-01

    An advanced marine reactor MRX designed by Japan Atomic Energy Research Institute (JAERI) adopts an in-vessel type control rod drive mechanism, which is installed inside the reactor vessel. Since the in-vessel type control rod drive mechanism should work at a severe condition of a high temperature and high pressure water - 310degC and 12 MPa -, the JAERI has developed the components, a ball bearing of which especially is one of key technologies for realization of this type mechanism. The present report describes the development of the ball bearing containing a survey of materials, material screening tests on oxidation in an autoclave and rolling wear by a small facility, a trial fabrication of the full size ball bearing, and endurance test of it in the high temperature water. As a result, it was found from the development that the materials of cobalt alloy for both of the inner and outer races, cermet for the ball, and graphite for the retainer can satisfy the design condition of the ball bearing. (author)

  3. Molecular biomarkers for weight control in obese individuals subjected to a multi-phase dietary intervention

    DEFF Research Database (Denmark)

    Bolton, Jennifer L; Montastier, Emilie; Carayol, Jérôme

    2017-01-01

    Context: While calorie restriction has proven beneficial for weight loss, long-term weight control is variable between individuals. Objective: To identify biomarkers of successful weight control during a dietary intervention (DI). Design, Setting, and Participants: Adipose tissue (AT) transcripto......-controllers. Interestingly, ASPN is a TGFβ1 inhibitor. Conclusions: We found circulating biomarkers associated with weight control, which could influence weight management strategies, and genes that may be prognostic for successful weight control....

  4. Subsurface-controlled geological maps for the Y-12 plant and adjacent areas of Bear Creek Valley

    International Nuclear Information System (INIS)

    King, H.L.; Haase, C.S.

    1987-04-01

    Bear Creek Valley in the vicinity of the US Department of Energy Y-12 Plant is underlain by Middle to Late Cambrian strata of the Conasauga Group. The group consists of interbedded limestones, shales, mudstones, and siltstones, and it can be divided into six discrete formations. Bear Creek Valley is bordered on the north by Pine Ridge, which is underlain by sandstones, siltstones, and shales of the Rome Formation, and on the south by Chestnut Ridge, which is underlain by dolostones of the Knox Group. Subsurface-controlled geological maps illustrating stratigraphic data and formational contacts for the formations within the Conasauga Group have been prepared for the Y-12 Plant vicinity and selected areas in Bear Creek Valley westward from the plant. The maps are consistent with all available surface and subsurface data for areas where sufficient data exist to make map construction feasible. 13 refs

  5. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1991-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial-stress-shear-strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of FBR plants. It also discusses the protection method against aging and the quality control which are important for implementation. (orig./HP)

  6. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1989-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial stress-shear strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of fast breeder reactor (FBR) plants. The paper also discusses the protection method against aging and the quality control which are important for implementation

  7. Weight misperception and disordered weight control behaviors among U.S. high school students with overweight and obesity: Associations and trends, 1999-2013.

    Science.gov (United States)

    Hazzard, Vivienne M; Hahn, Samantha L; Sonneville, Kendrin R

    2017-08-01

    To examine prevalence of weight misperception (incongruence between one's perceived weight status and one's actual weight status) and disordered weight control behaviors (DWCBs; unhealthy behaviors aiming to control or modify weight), associations between weight misperception and DWCBs, and temporal trends in prevalence and associations among adolescents with overweight and obesity from 1999 to 2013. Self-reported data from eight biennial cycles (1999-2013) of the cross-sectional national Youth Risk Behavior Survey were used in analyses restricted to respondents with overweight/obesity. Data on weight status perception, use of fasting, purging, and diet pills to control weight, sex, race/ethnicity, and grade in school were used in multivariate logistic regression models. Among U.S. high school students with overweight and obesity, no linear temporal trends were detected for prevalence of weight misperception, fasting, or purging between 1999 and 2013, while a significant linear decrease was observed for prevalence of diet pill use between 1999 and 2013 (b=-0.81, pfasting to control weight among males. No significant changes over time in associations of weight misperception with fasting or purging were observed, though the association between weight misperception and diet pill use weakened somewhat across 1999-2013. In the context of increasing prevalence of overweight and obesity, weight misperception appears to be a robust protective factor for DWCBs. Copyright © 2017. Published by Elsevier Ltd.

  8. Enhancing stability of industrial turbines using adjustable partial arc bearings

    Science.gov (United States)

    Chasalevris, Athanasios; Dohnal, Fadi

    2016-09-01

    The paper presents the principal of operation, the simulation and the characteristics of two partial-arc journal bearings of variable geometry and adjustable/controllable stiffness and damping properties. The proposed journals are supposed to consist of a scheme that enables the periodical variation of bearing properties. Recent achievements of suppressing rotor vibrations using plain circular journal bearings of variable geometry motivate the further extension of the principle to bearings of applicable geometry for industrial turbines. The paper describes the application of a partial-arc journal bearing to enhance stability of high speed industrial turbines. The proposed partial-arc bearings with adjustable/controllable properties enhance stability and they introduce stable margins in speeds much higher than the 1st critical.

  9. What is the role of portion control in weight management?

    Science.gov (United States)

    Rolls, B J

    2014-01-01

    Systematic studies have shown that providing individuals with larger portions of foods and beverages leads to substantial increases in energy intake. The effect is sustained over weeks, supporting the possibility that large portions have a role in the development of obesity. The challenge is to find strategies to effectively manage the effects of portion size. One approach involves teaching people to select appropriate portions and to use tools that facilitate portion control. Although tools such as portion-control plates have been shown in several randomized trials to improve weight loss, limited data are available on whether education and tools lead to long-term changes in eating behavior and body weight. Another approach is to use preportioned foods (PPFs) to add structure to meals and minimize decisions about the amount of food to eat. A number of randomized controlled trials have demonstrated the efficacy of both liquid meal replacements and solid PPFs for weight loss and weight loss maintenance, but it is not known if they lead to better understanding of appropriate portions. Although portion control is important for weight management, urging people simply to ‘eat less' of all foods may not be the best approach as high-energy-dense foods disproportionately increase energy intake compared with those lower in energy density. A more effective strategy may be to encourage people to increase the proportion of foods low in energy density in their diets while limiting portions of high-energy-dense foods. If people lower the energy density of their diet, they can eat satisfying portions while managing their body weight. PMID:25033958

  10. Examination of weight control practices in a non-clinical sample of college women.

    Science.gov (United States)

    Hayes, S; Napolitano, M A

    2012-09-01

    The current study examined healthy weight control practices among a sample of college women enrolled at an urban university (N=715; age=19.87±1.16; 77.2% Caucasian; 13.4% African American, 7.2% Asian, 2.2% other races). Participants completed measures as part of an on-line study about health habits, behaviors, and attitudes. Items from the Three Factor Eating Questionnaire were selected and evaluated with exploratory factor analysis to create a healthy weight control practices scale. Results revealed that college women, regardless of weight status, used a comparable number (four of eight) of practices. Examination of racial differences between Caucasian and African American women revealed that normal weight African American women used significantly fewer strategies than Caucasian women. Of note, greater use of healthy weight control practices was associated with higher cognitive restraint, drive for thinness, minutes of physical activity, and more frequent use of compensatory strategies. Higher scores on measures of binge and disinhibited eating, body dissatisfaction, negative affect, and depressive symptoms were associated with greater use of healthy weight control practices by underweight/normal weight but not by overweight/obese college women. Results suggest that among a sample of college females, a combination of healthy and potentially unhealthy weight control practices occurs. Implications of the findings suggest the need for effective weight management and eating disorder prevention programs for this critical developmental life stage. Such programs should be designed to help students learn how to appropriately use healthy weight control practices, as motivations for use may vary by weight status.

  11. Friction coefficients of PTFE bearing liner

    Science.gov (United States)

    Daniels, C. M.

    1979-01-01

    Data discusses frictional characteristics of PTFE (polytetrafluoroethylene) under temperature extremes and in vacuum environment. Tests were also run on reduced scale hardware to determine effects of vacuum. Data is used as reference by designers of aircraft-control system rod-end bearings and for bearings used in polar regions.

  12. Leisure-time physical activity patterns by weight control status: 1999-2002 NHANES.

    Science.gov (United States)

    Kruger, Judy; Yore, Michelle M; Kohl, Harold W

    2007-05-01

    Regular physical activity reduces the risk of hypertension, type 2 diabetes, coronary heart disease, stroke, and some cancers. Physical activity is associated inversely with overweight and obesity prevalence, thus potentially assisting in weight control efforts. The purpose of this paper is to examine the variability of physical activity levels and their patterns by self-reported weight control status in a nationally representative sample. Four years of data from the 1999-2002 National Health and Nutrition Examination Survey (NHANES) were used to examine leisure-time physical activity patterns (regular, irregular, inactive) and the prevalence of weight control practices (trying to lose, trying to maintain, not trying to lose or maintain) among U.S. adults (N = 9496). The prevalence of regular physical activity was 32.6% among people trying to lose weight, 37.9% among people trying to maintain weight, and 21.8% among those not trying to lose or maintain weight. Those trying to lose weight were almost three times as likely to be regularly active (vs inactive), and those trying to maintain weight were over three times more likely to be regularly active (vs inactive) than those not trying to lose or maintain weight. The most commonly reported activities among those trying to lose weight were walking (38.3%), yard work (14.5%), biking (12.5%), and running (11.6%). Despite the importance of physical activity, fewer than half the people trying to lose or maintain weight were regularly active during leisure-time. People trying to lose or maintain weight had a higher likelihood of being regularly active than those not trying to lose or maintain weight. Walking was the most common type of physical activity among all weight control groups. Health promotion efforts should promote increased levels of physical activity among all adults.

  13. Use of probabilistic weights to enhance linear regression myoelectric control

    Science.gov (United States)

    Smith, Lauren H.; Kuiken, Todd A.; Hargrove, Levi J.

    2015-12-01

    Objective. Clinically available prostheses for transradial amputees do not allow simultaneous myoelectric control of degrees of freedom (DOFs). Linear regression methods can provide simultaneous myoelectric control, but frequently also result in difficulty with isolating individual DOFs when desired. This study evaluated the potential of using probabilistic estimates of categories of gross prosthesis movement, which are commonly used in classification-based myoelectric control, to enhance linear regression myoelectric control. Approach. Gaussian models were fit to electromyogram (EMG) feature distributions for three movement classes at each DOF (no movement, or movement in either direction) and used to weight the output of linear regression models by the probability that the user intended the movement. Eight able-bodied and two transradial amputee subjects worked in a virtual Fitts’ law task to evaluate differences in controllability between linear regression and probability-weighted regression for an intramuscular EMG-based three-DOF wrist and hand system. Main results. Real-time and offline analyses in able-bodied subjects demonstrated that probability weighting improved performance during single-DOF tasks (p < 0.05) by preventing extraneous movement at additional DOFs. Similar results were seen in experiments with two transradial amputees. Though goodness-of-fit evaluations suggested that the EMG feature distributions showed some deviations from the Gaussian, equal-covariance assumptions used in this experiment, the assumptions were sufficiently met to provide improved performance compared to linear regression control. Significance. Use of probability weights can improve the ability to isolate individual during linear regression myoelectric control, while maintaining the ability to simultaneously control multiple DOFs.

  14. Weight-controlled capillary viscometer

    Science.gov (United States)

    Digilov, Rafael M.; Reiner, M.

    2005-11-01

    The draining of a water column through a vertical discharge capillary tube is examined with the aid of a force sensor. The change of the mass of the liquid in the column with time is found to be not purely exponential as implied by Poiseuille's law. Using observed residuals associated with a kinetic energy correction, an approximate formula for the mass as a function of time is derived and excellent agreement with experimental data is attained. These results are verified by a viscosity test of distilled water at room temperature. A simple and inexpensive weight-controlled capillary viscometer is proposed that is especially suitable for undergraduate physics and chemistry laboratories.

  15. Reducing Stress-Corrosion Cracking in Bearing Alloys

    Science.gov (United States)

    Paton, N. E.; Dennies, D. P.; Lumsden, I., J.b.

    1986-01-01

    Resistance to stress-corrosion cracking in some stainless-steel alloys increased by addition of small amounts of noble metals. 0.75 to 1.00 percent by weight of palladium or platinum added to alloy melt sufficient to improve properties of certain stainless steels so they could be used in manufacture of high-speed bearings.

  16. Control of body weight by eating behavior in children

    Directory of Open Access Journals (Sweden)

    Modjtaba eZandian

    2015-10-01

    Full Text Available Diet, exercise, and pharmacological interventions have limited effects in counteracting the worldwide increase in pediatric body weight. Moreover, the promise that individualized drug design will work to induce weight loss appears to be exaggerated. We suggest that the reason for this limited success is that the cause of obesity has been misunderstood. Body weight is mainly under external control; our brain permits us to eat under most circumstances, and unless the financial or physical cost of food is high, eating and body weight increase by default. When energy-rich, inexpensive foods are continually available, people need external support to maintain a healthy body weight. Weight loss can thereby be achieved by continuous feedback on how much and how fast to eat on a computer screen.

  17. A new chart for weight control in Duchenne muscular dystrophy.

    OpenAIRE

    Griffiths, R D; Edwards, R H

    1988-01-01

    Weight control is desirable in the muscle wasting conditions. A new chart is presented to allow the prediction of an ideal weight, free of excess fat, specifically for boys with Duchenne muscular dystrophy.

  18. The effect of weight controllability beliefs on prejudice and self-efficacy

    Science.gov (United States)

    Loi, Natasha M.; Breadsell, Dana

    2016-01-01

    An experiment was conducted to test for the presence of prejudice towards obesity and whether weight controllability beliefs information reduces this prejudice and impacts on a person’s own healthy eating self-efficacy. The experiment randomly allocated 346 participants (49 males) into one of three conditions: controllable contributors toward obesity condition (e.g., information about personal control about diet and exercise); uncontrollable contributors toward obesity condition (e.g., information about genes, factors in society); and a control condition with no information given. Prejudice was present in 81% of the sample. High prejudice was predicted by low self-efficacy for exercise and weight. Weight controllability beliefs information had no significant effect on prejudice levels or exercise or healthy eating self-efficacy levels. Future research directions are discussed. PMID:26966679

  19. Physical activity intensity and weight control status among U.S. Adults with diabetes.

    Science.gov (United States)

    Loprinzi, Paul D; Pariser, Gina

    2014-01-01

    We have a limited understanding of the objectively determined physical activity levels by weight control status (i.e., trying to lose weight, trying to maintain weight, and neither trying to lose or maintain weight) among U.S. adults with diabetes. Therefore, this study assessed the association between physical activity and weight control status among U.S. adults with diabetes. Cross-sectional survey. The 2003-2006 National Health and Nutrition Examination Survey (NHANES) was used, which is representative of the U.S. population. Subjects were 733 adults (≥20 years) with diabetes. Participants wore an accelerometer to assess physical activity, and questionnaires were used to assess weight control status and covariates. Multivariate negative binomial regressions were used. After adjustments, and compared to those not trying to lose or maintain their weight, women trying to lose weight engaged in 74% more physical activity (rate ratio = 1.74; 95% confidence interval [CI]: 1.14 to 2.65). Although findings were not significant for men, men were more likely than women to meet physical activity recommendations. Diabetic women trying to lose weight engaged in more physical activity than did their female counterparts not trying to lose or maintain their weight. Although men were more active than women, no differences in activity estimates occurred across weight control status for men.

  20. Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

    Science.gov (United States)

    Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

    2009-01-01

    Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

  1. Blade Bearing Friction Estimation of Operating Wind Turbines

    DEFF Research Database (Denmark)

    Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

    2012-01-01

    Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...... monitoring systems. A novel algorithm for online monitoring of bearing friction level is developed combining physical knowledge about pitch system dynamics with state estimator, i.e. observer theory and signal processing assuming realistic sensor availability. Results show estimation of bearing friction...

  2. What distinguishes weight loss maintainers of the German Weight Control Registry from the general population?

    Science.gov (United States)

    Feller, Silke; Müller, Astrid; Mayr, Andreas; Engeli, Stefan; Hilbert, Anja; de Zwaan, Martina

    2015-05-01

    Differences between successful long-term weight loss maintainers and the general population with regard to eating and weighing habits, non-normative eating behaviors, and eating-related and general psychopathological parameters are unknown. Self-identified weight loss maintainers from the German Weight Control Registry (GWCR, n = 494) were compared with a representative sample of the general German population (n = 2,129). The samples did not differ in current BMI. Using the same assessment instruments in both cohorts, a variety of eating-related and psychological variables were determined. The GWCR participants reported more self-weighing and higher eating frequency but less hot meal consumption and more eating-out-of-home. Binge eating, compensatory behaviors, and concerns about shape and weight were reported more often by successful weight loss maintainers. Scores of depression and worrying about health were slightly higher whereas severity of somatic symptoms was less pronounced in the GWCR participants. Overall, our data suggest that successful weight loss maintainers are characterized by more concerns about shape and weight, greater binge eating frequency, and higher use of compensatory behaviors. The latter suggests that weight loss maintenance might not only be achieved by healthy strategies but also by non-normative behaviors which might increase the vulnerability for weight regain. © 2015 The Obesity Society.

  3. Feasibility of Applying Controllable Lubrication to Dynamically Loaded Journal Bearings

    DEFF Research Database (Denmark)

    Estupinan, Edgar Alberto; Santos, Ilmar

    2009-01-01

    A multibody dynamic model of the main mechanical components of a hermetic reciprocating compressor is presented in this work. Considering that some of the mechanical elements are interconnected via thin fluid films, the multibody dynamic model is coupled to the equations from the dynamics...... of the fluid films, based on fluid film theory. For a dynamically loaded journal bearing, the fluid film pressure distribution can be computed by numerically solving the Reynolds equation, by means of finite-difference method. Particularly, in this study the main focus is on the lubrication behavior...... and reaction forces in a reciprocating compressor have a cyclic behavior, periodic oil pressure injection rules based on the instantaneous crank angle and load bearing condition can be established. In this paper, several bearing configurations working under different oil pressure injection rules conditions...

  4. School-Based Obesity-Prevention Policies and Practices and Weight-Control Behaviors among Adolescents.

    Science.gov (United States)

    Larson, Nicole; Davey, Cynthia S; Caspi, Caitlin E; Kubik, Martha Y; Nanney, Marilyn S

    2017-02-01

    The promotion of healthy eating and physical activity within school settings is an important component of population-based strategies to prevent obesity; however, adolescents may be vulnerable to weight-related messages, as rapid development during this life stage often leads to preoccupation with body size and shape. This study examines secular trends in secondary school curricula topics relevant to the prevention of unhealthy weight-control behaviors; describes cross-sectional associations between weight-related curricula content and students' use of weight-control behaviors; and assesses whether implementation of school-based obesity-prevention policies/practices is longitudinally related to students' weight-control behaviors. The Minnesota School Health Profiles and Minnesota Student Survey (grades 9 and 12) data were used along with National Center for Education Statistics data to examine secular trends, cross-sectional associations (n=141 schools), and longitudinal associations (n=42 schools). Students self-reported their height and weight along with past-year use of healthy (eg, exercise), unhealthy (eg, fasting), and extreme (eg, use laxatives) weight-control behaviors. Descriptive statistics, generalized estimating equations, and generalized linear regression models accounting for school-level demographics. There was no observable pattern during the years 2008 to 2014 in the mean number of curricula topics addressing unhealthy weight-control behaviors, despite an increase in the prevalence of curricula addressing acceptance of body-size differences. Including three vs fewer weight-control topics and specifically including the topic of eating disorders in the curricula was related to a lower school-level percent of students using any extreme weight-control behaviors. In contrast, an overall measure of implementing school-based obesity-prevention policies/practices (eg, prohibited advertising) was unrelated to use of unhealthy or extreme behaviors

  5. Fuzzy Logic Based Set-Point Weighting Controller Tuning for an Internal Model Control Based PID Controller

    Directory of Open Access Journals (Sweden)

    Maruthai Suresh

    2009-10-01

    Full Text Available Controller tuning is the process of adjusting the parameters of the selected controller to achieve optimum response for the controlled process. For many of the control problems, a satisfactory performance is obtained by using PID controllers. One of the main problems with mathematical models of physical systems is that the parameters used in the models cannot be determined with absolute accuracy. The values of the parameters may change with time or various effects. In these cases, conventional controller tuning methods suffer when trying a lot to produce optimum response. In order to overcome these difficulties a fuzzy logic based Set- Point weighting controller tuning method is proposed. The effectiveness of the proposed scheme is analyzed through computer simulation using SIMULINK software and the results are presented. The fuzzy logic based simulation results are compared with Cohen-Coon (CC, Ziegler- Nichols (ZN, Ziegler – Nichols with Set- Point weighting (ZN-SPW, Internal Model Control (IMC and Internal model based PID controller responses (IMC-PID. The effects of process modeling errors and the importance of controller tuning have been brought out using the proposed control scheme.

  6. Design of Active Magnetic Bearing Controllers for Rotors Subjected to Gas Seal Forces

    DEFF Research Database (Denmark)

    Lauridsen, Jonas Skjødt; Santos, Ilmar F.

    2018-01-01

    Proper design of feedback controllers is crucial for ensuring high performance of Active Magnetic Bearing (AMB) supported rotor dynamic systems. Annular seals in those systems can contribute with significant forces, which, in many cases, are hard to model in advance due to complex geometries...... of the seal and multiphase fluids. Hence, it can be challenging to design AMB controllers that will guarantee robust performance for these kinds of systems. This paper demonstrates the design, simulation and experimental results of model based controllers for AMB systems, subjected to dynamic seal forces....... The controllers are found using H-infinity - and µ synthesis and are based on a global rotor dynamic model in-which the seal coefficients are identified in-situ. The controllers are implemented in a rotor-dynamic test facility with two radial AMBs and one annular seal with an adjustable inlet pressure. The seal...

  7. A theoretical-experimental study of backup bearings

    DEFF Research Database (Denmark)

    Lampe Linhares da Fonseca, Cesar Augusto

    of two types of backup bearings, which are investigated experimentally and theoretically. The first type is a conventional ball bearing commonly used in industrial applications. The second is an unconventional bearing that, which contains pins inside the clearance for the rotor to impact on. The main...... both types of bearings for further investigation. Also, a full failure of the control and a rotor drop on the ball bearing as backup bearing is investigated by removing the magnetic forces. The nonlinear features of the dynamics of the rotor are assessed for different levels of unbalance. It has been...... radial forces. Remaining in this condition, it may lead to permanent damage or total failure of the machine. This is why the backup bearing design has to be carefully planned and investigated as to whether it helps to protect the integrity of the machine. This PhD thesis provides a comprehensive study...

  8. Evaluation on the Effect of Load Follow Controller's Weighting Factors

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Keuk Jong; Lee, Jae Gon [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    there are several important physical effects that limit the possibilities of power variations in NPPs. Some major effects are moderator and xenon effect. Moderator effect is relation with moderator density change and xenon effect is relation with the concentration change of Xe-135 which could affect axial power shape. These effects are more significant with large magnitudes of power variations and they are considered as major disturbances at the aspect of control method. Due to the above physical effects, it is necessary to carefully change nuclear power considering power distribution change in the core. So, when nuclear plants are required to operate on load variation mode, we could control not only reactor power but also power distribution. Generally, power distribution is controlled by reactor operators who have enough experience, whereas reactor power is automatically controlled by automatic controllers. So, it is necessary to design an automatic controller that controls both reactor power and power distribution for frequent load following operation. Korea Hydro and Nuclear Power Co., LTD (KHNP) has been developing automatic load follow controller as a part of Advanced Power Reactor Plus (APR+) development. The developing controller is composed of three algorithms which could control reactor power and axial power shape. This paper aimed to evaluate the effect of the controller’s weighting factors. So, in this paper, we identify the meaning of the weighting factors and the controlled output weighting factors are selected among them. In this study, the effect of output weighting factors is analyzed. According to the simulation results, it is recommended that the weighting factor of power be between 200 and 400 and that of ASI be between 200 and 600. In the near future, based on the study, optimization of power and ASI weighting factors will be performed at the same time.

  9. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  10. Does the 'Teddy Bear Hospital' enhance preschool children's knowledge? A pilot study with a pre/post-case control design in Germany.

    Science.gov (United States)

    Leonhardt, Corinna; Margraf-Stiksrud, Jutta; Badners, Larissa; Szerencsi, Andrea; Maier, Rolf F

    2014-10-01

    The 'Teddy Bear Hospital' is a medical students' project, which has been increasingly established in many countries. To evaluate this concept, we examined the effects of a German Teddy Bear Hospital on children's knowledge relating to their body, health and disease. Using a quasi-experimental pre/post design, we examined 131 preschool children from 14 German kindergartens with pictorial interview-based scales. The analysis of covariance revealed that the children who visited the Teddy Bear Hospital had a significantly better knowledge concerning their body, health and disease than the children from the control group. This German Teddy Bear Hospital is a good health education vehicle for preschool children. © The Author(s) 2013.

  11. Camshaft bearing arrangement

    Energy Technology Data Exchange (ETDEWEB)

    Aoi, K.; Ozawa, T.

    1986-06-10

    A bearing arrangement is described for the camshaft of an internal combustion engine or the like which camshaft is formed along its length in axial order with a first bearing surface, a first cam lobe, a second bearing surface, a second cam lobe, a third bearing surface, a third cam lobe and a fourth bearing surface, the improvement comprising first bearing means extending around substantially the full circumference of the first bearing surface and journaling the first bearing surface, second bearing means extending around substantially less than the circumference of the second bearing surface and journaling the second bearing surface, third bearing means extending around substantially less than the circumference of the third bearing surface and journaling the third bearing surface, and fourth bearing means extending around substantially the full circumference of the fourth bearing surface and journaling the first bearing surface.

  12. Gender orientation and alcohol-related weight control behavior among male and female college students.

    Science.gov (United States)

    Peralta, Robert L; Barr, Peter B

    2017-01-01

    We examine weight control behavior used to (a) compensate for caloric content of heavy alcohol use; and (b) enhance the psychoactive effects of alcohol among college students. We evaluate the role of gender orientation and sex. Participants completed an online survey (N = 651; 59.9% women; 40.1% men). Weight control behavior was assessed via the Compensatory-Eating-and-Behaviors-in Response-to-Alcohol-Consumption-Scale. Control variables included sex, race/ethnicity, age, and depressive symptoms. Gender orientation was measured by the Bem Sex Role Inventory. The prevalence and probability of alcohol-related weight control behavior using ordinal logistic regression are reported. Men and women do not significantly differ in compensatory-weight-control-behavior. However, regression models suggest that recent binge drinking, other substance use, and masculine orientation are positively associated with alcohol-related weight control behavior. Sex was not a robust predictor of weight control behavior. Masculine orientation should be considered a possible risk factor for these behaviors and considered when designing prevention and intervention strategies.

  13. A pilot study of a weight management program with food provision in schizophrenia.

    Science.gov (United States)

    Jean-Baptiste, Michel; Tek, Cenk; Liskov, Ellen; Chakunta, Umesh Rao; Nicholls, Sarah; Hassan, Akm Q; Brownell, Kelly D; Wexler, Bruce E

    2007-11-01

    Obesity is a serious medical problem that disproportionately affects people with severe mental illness. Behavioral strategies aimed at lifestyle modification have proven effective for weight loss in general population but have not been studied adequately among persons with schizophrenia. We have conducted a randomized controlled pilot trial of an established weight loss program, modified for this specific population, and supplemented with a novel food replacement program, as well as practical, community based teaching of shopping and preparing healthy food. The program not only arrested weight gain, and produced meaningful weight loss, but also weight loss continued 6 months after the intervention is completed. Cognitive impairment had no bearing to the extent a participant benefited from the program. As a conclusion, well designed simple behavioral programs can produce lasting weight loss for patients with schizophrenia and comorbid obesity, improve metabolic indices, and possibly decrease significant medical risks associated with obesity.

  14. 1H-NMR METABONOMICS ANALYSIS OF SERA DIFFERENTIATES BETWEEN MAMMARY TUMOR-BEARING MICE AND HEALTHY CONTROLS

    Science.gov (United States)

    Global analysis of 1H-NMR spectra of serum is an appealing approach for the rapid detection of cancer. To evaluate the usefulness of this method in distinguishing between mammary tumor-bearing mice and healthy controls, we conducted 1H-NMR metabonomic analyses on serum samples ob...

  15. Asthma and obesity: does weight loss improve asthma control? a systematic review

    Directory of Open Access Journals (Sweden)

    Juel CTB

    2012-06-01

    Full Text Available Caroline Trunk-Black Juel,1 Zarqa Ali,1 Lisbeth Nilas,2 Charlotte Suppli Ulrik11Respiratory Section, Internal Medicine Unit, 2Department of Obstetrics and Gynaecology, Hvidovre Hospital and University of Copenhagen, Hvidovre, DenmarkAim and methods: Obesity is a major health problem, and obesity is associated with a high incidence of asthma and poor asthma control. The aim of the present paper is to systematically review the current knowledge of the effect on overall asthma control of weight reduction in overweight and obese adults with asthma.Results: Weight loss in obese individuals with doctor-diagnosed asthma is associated with a 48%–100% remission of asthma symptoms and use of asthma medication. Published studies, furthermore, reveal that weight loss in obese asthmatics improves asthma control, and that especially surgically induced weight loss results in significant improvements in asthma severity, use of asthma medication, dyspnoea, exercise tolerance, and acute exacerbations, including hospitalizations due to asthma. Furthermore, weight loss in obese asthmatics is associated with improvements in level of lung function and airway responsiveness to inhaled methacholine, whereas no significant improvements have been observed in exhaled nitric oxide or other markers of eosinophilic airway inflammation.Conclusion: Overweight and obese adults with asthma experience a high symptomatic remission rate and significant improvements in asthma control, including objective measures of disease activity, after weight loss. Although these positive effects of weight loss on asthma-related health outcomes seem not to be accompanied by remission or improvements in markers of eosinophilic airway inflammation, it has potentially important implications for the future burden of asthma.Keywords: asthma, weight loss, diet, bariatric surgery, asthma control

  16. Randomised controlled trial and economic analysis of an internet-based weight management programme: POWeR+ (Positive Online Weight Reduction).

    Science.gov (United States)

    Little, Paul; Stuart, Beth; Hobbs, Fd Richard; Kelly, Jo; Smith, Emily R; Bradbury, Katherine J; Hughes, Stephanie; Smith, Peter Wf; Moore, Michael V; Lean, Mike Ej; Margetts, Barrie M; Byrne, Christopher D; Griffin, Simon; Davoudianfar, Mina; Hooper, Julie; Yao, Guiqing; Zhu, Shihua; Raftery, James; Yardley, Lucy

    2017-01-01

    Behavioural counselling with intensive follow-up for obesity is effective, but in resource-constrained primary care settings briefer approaches are needed. To estimate the clinical effectiveness and cost-effectiveness of an internet-based behavioural intervention with regular face-to-face or remote support in primary care, compared with brief advice. Individually randomised three-arm parallel trial with health economic evaluation and nested qualitative interviews. Primary care general practices in the UK. Patients with a body mass index of ≥ 30 kg/m 2 (or ≥ 28 kg/m 2 with risk factors) identified from general practice records, recruited by postal invitation. Positive Online Weight Reduction (POWeR+) is a 24-session, web-based weight management intervention completed over 6 months. Following online registration, the website randomly allocated participants using computer-generated random numbers to (1) the control intervention ( n  = 279), which had previously been demonstrated to be clinically effective (brief web-based information that minimised pressure to cut down foods, instead encouraging swaps to healthier choices and increasing fruit and vegetables, plus 6-monthly nurse weighing); (2) POWeR+F ( n  = 269), POWeR+ supplemented by face-to-face nurse support (up to seven contacts); or (3) POWeR+R ( n  = 270), POWeR+ supplemented by remote nurse support (up to five e-mails or brief telephone calls). The primary outcome was a modelled estimate of average weight reduction over 12 months, assessed blind to group where possible, using multiple imputation for missing data. The secondary outcome was the number of participants maintaining a 5% weight reduction at 12 months. A total of 818 eligible individuals were randomised using computer-generated random numbers. Weight change, averaged over 12 months, was documented in 666 out of 818 participants (81%; control, n  = 227; POWeR+F, n  = 221; POWeR+R, n  = 218). The control group

  17. Calculation methods for externally pressurised (hydrostatic) journal bearings with capillary restrictor control

    Science.gov (United States)

    1992-09-01

    ESDU 92026 provides a procedure for the design and performance analysis of the bearings with five or more identical equally-spaced rectangular recesses (or pockets) fed by identical capillary restrictors from a constant pressure supply. The method takes account of stiffness and overload capacity requirements and determines the bearing overall size and proportions from the required load, speed and shaft diameter, recommends the clearance and supply pressure, and defines the recess dimensions and capillary restrictor size from the properties of the chosen lubricant. Equations and charts allow prediction of the journal displacement under load, the power loss, the lubricant flow rate, and the bearing and lubricant temperatures. The method applies to laminar flow and guidance is given for assessing the onset of non-laminar flow in the bearing and restrictors. Guidance is also given on the likelihood of bearing-induced instability. The user is assisted by flowcharts in applying the method, and two practical worked examples illustrate the procedure. ESDU 92037 introduces a FORTRAN program that implements the method, and magnetic media are available in ESDUpac A9237.

  18. Electromyographic preactivation pattern of the gluteus medius during weight-bearing functional tasks in women with and without anterior knee pain.

    Science.gov (United States)

    Nakagawa, Theresa H; Muniz, Thiago B; Baldon, Rodrigo M; Maciel, Carlos D; Amorim, César F; Serrão, Fábio V

    2011-01-01

    Proximal factors have been proposed to influence the biomechanics of the patellofemoral joint. A delayed or diminished gluteus medius (GM) activation, before the foot contact on the ground during functional activities could lead to excessive femur adduction and internal rotation and be associated with anterior knee pain (AKP). There are few studies on this topic and the results were inconclusive, therefore, it is necessary to investigate the GM preactivation pattern during functional activities. To compare the GM electromyographic (EMG) preactivation pattern during walking, descending stairs and in single leg jump task in women with and without AKP. Nine women clinically diagnosed with AKP and ten control subjects with no history of knee injury participated in this study. We evaluated GM EMG linear envelope before the foot contact on the ground during walking and GM onset time and EMG linear envelope during descending stairs as well as in a single leg vertical jump. Mann-Whitney U tests were used to determine the between-group differences in GM EMG preactivation pattern. No between-group differences were observed in GM linear envelope during walking (P=0.41), GM onset time and linear envelope during descending stairs (P=0.17 and P=0.15) and single leg jump (P=0.81 and P=0.33). Women with AKP did not demonstrated altered GM preactivation pattern during functional weight bearing activities. Our results did not support the hypothesis that poor GM preactivation pattern could be associated with AKP.

  19. Novel maglev pump with a combined magnetic bearing.

    Science.gov (United States)

    Onuma, Hiroyuki; Murakami, Michiko; Masuzawa, Toru

    2005-01-01

    The newly developed pump is a magnetically levitated centrifugal blood pump in which active and passive magnetic bearings are integrated to construct a durable ventricular assist device. The developed maglev centrifugal pump consists of an active magnetic bearing, a passive magnetic bearing, a levitated impeller, and a motor stator. The impeller is set between the active magnetic bearing and the motor stator. The active magnetic bearing uses four electromagnets to control the tilt and the axial position of the impeller. The radial movement of the levitated impeller is restricted with the passive stability dependent upon the top stator and the passive permanent magnetic bearing to reduce the energy consumption and the control system complexity. The top stator was designed based upon a magnetic field analysis to develop the maglev pump with sufficient passive stability in the radial direction. By implementing this analysis design, the oscillating amplitude of the impeller in the radial direction was cut in half when compared with the simple shape stator. This study concluded that the newly developed maglev centrifugal pump displayed excellent levitation performance and sufficient pump performance as a ventricular assist device.

  20. Evaluation of knee-joint cartilage and menisci ten years after isolated and combined ruptures of the medial collateral ligament. Investigation by weight-bearing radiography, MR imaging and analysis of proteoglycan fragments in the joint fluid

    Energy Technology Data Exchange (ETDEWEB)

    Lundberg, M. [Univ. Hospital, Linkoeping (Sweden). Dept. of Orthopaedics and Sports Medicine (Sweden); Thuomas, K.Aa. [Univ. Hospital, Linkoeping (Sweden). Dept. of Diagnostic Radiology; Messner, K. [Univ. Hospital, Linkoeping (Sweden). Dept. of Orthopaedics and Sports Medicine (Sweden)

    1997-01-01

    Purpose: To compare radiography, MR imaging, and chemical analysis in posttraumatic knees. Material and Methods: Ten matched pairs with either isolated partial rupture of the medial collateral ligament or combined medial collateral ligament/anterior cruciate ligament rupture were compared with matched controls 10 years after trauma. Weight-bearing radiographys and MR examinations were compared with proteoglycan fragment concentrations in the joint fluid. Results: The chemical analyses were similar in both trauma groups. The radiographs showed mild signs of arthrosis in half the patients with combined injury. MR images showed almost all injuried knees to have degenerative changes of various degrees in the cartilage and menisci. More frequent and more advanced changes were found after combined injury than after isolated injury (p<0.01). There were no changes in the controls. Conclusion: MR imaging is the best method for detecting and differentiating early posttraumatic knee arthrosis. (orig.).

  1. Evaluation of knee-joint cartilage and menisci ten years after isolated and combined ruptures of the medial collateral ligament. Investigation by weight-bearing radiography, MR imaging and analysis of proteoglycan fragments in the joint fluid

    International Nuclear Information System (INIS)

    Lundberg, M.; Thuomas, K.Aa.

    1997-01-01

    Purpose: To compare radiography, MR imaging, and chemical analysis in posttraumatic knees. Material and Methods: Ten matched pairs with either isolated partial rupture of the medial collateral ligament or combined medial collateral ligament/anterior cruciate ligament rupture were compared with matched controls 10 years after trauma. Weight-bearing radiographys and MR examinations were compared with proteoglycan fragment concentrations in the joint fluid. Results: The chemical analyses were similar in both trauma groups. The radiographs showed mild signs of arthrosis in half the patients with combined injury. MR images showed almost all injuried knees to have degenerative changes of various degrees in the cartilage and menisci. More frequent and more advanced changes were found after combined injury than after isolated injury (p<0.01). There were no changes in the controls. Conclusion: MR imaging is the best method for detecting and differentiating early posttraumatic knee arthrosis. (orig.)

  2. Psychological control by parents is associated with a higher child weight.

    Science.gov (United States)

    Rodenburg, Gerda; Kremers, Stef P J; Oenema, Anke; van de Mheen, Dike

    2011-10-01

    In this examination of the association between parenting style and child weight, the neglected concept of 'psychological control' has been added to the generally accepted parenting dimensions 'support' and 'behavioural control'. Also explored is whether the potential association between parenting and child weight is moderated by socio-demographic variables (child's age/ethnicity, and parent's education level). A cross-sectional study was performed among 1,665 parent-child dyads. The children's mean age was 8 years. Their height and weight were measured to calculate their body mass index (BMI). Parents completed a questionnaire to measure the three parenting dimensions. Based on these dimensions, five parenting styles were defined: the authoritative, permissive, authoritarian, neglecting and rejecting parenting style. Child BMI z-scores were regressed on parenting style, adjusting for parental BMI, child ethnicity, and parent's education level. Rejecting parenting, characterized by high psychological control, low support and low behavioural control, is the only parenting style significantly related to child BMI z-scores (β = 0.074, p parenting, this study has further elucidated the mechanisms whereby parenting may affect child weight. Demonstrating that 'rejecting parenting' is associated with a higher child weight, emphasizes the need for longitudinal studies in which parenting style is measured three-dimensionally. Potential mediating effects of parental feeding style and children's eating style, as well as age moderation, should be included in these studies.

  3. Cohort Study of the Success of Controlled Weight Loss Programs for Obese Dogs.

    Science.gov (United States)

    German, A J; Titcomb, J M; Holden, S L; Queau, Y; Morris, P J; Biourge, V

    2015-01-01

    Most weight loss studies in obese dogs assess rate and percentage of weight loss in the first 2-3 months, rather than the likelihood of successfully reaching target weight. To determine outcome of controlled weight loss programs for obese dogs, and to determine the factors associated with successful completion. 143 obese dogs undergoing a controlled weight loss program. This was a cohort study of obese dogs attending a referral weight management clinic. Dogs were studied during their period of weight loss, and cases classified according to outcome as "completed" (reached target weight), "euthanized" (was euthanized before reaching target weight), or "stopped prematurely" (program stopped early for other reasons). Factors associated with successful completion were assessed using simple and multiple logistic regression. 87/143 dogs (61%) completed their weight loss program, 11 [8%] died or were euthanized, and the remaining 45 [32%] stopped prematurely. Reasons for dogs stopping prematurely included inability to contact owner, refusal to comply with weight management advice, or development of another illness. Successful weight loss was positively associated with a faster rate (P obese dogs on a controlled weight loss program reach their target weight. Future studies should better clarify reasons for success in individual cases, and also the role of factors such as activity and behavioral modification. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  4. Overestimation of own body weights in female university students: associations with lifestyles, weight control behaviors and depression

    OpenAIRE

    Kim, Miso; Lee, Hongmie

    2010-01-01

    The study aimed to analyze the lifestyles, weight control behavior, dietary habits, and depression of female university students. The subjects were 532 students from 8 universities located in 4 provinces in Korea. According to percent ideal body weight, 33 (6.4%), 181 (34.0%), 283 (53.2%), 22 (4.1%) and 13 (2.5%) were severely underweight, underweight, normal, overweight and obese, respectively, based on self-reported height and weight. As much as 64.1% and only 2.4%, respectively, overestima...

  5. Spatial Distribution of Black Bear Incident Reports in Michigan.

    Directory of Open Access Journals (Sweden)

    Jamie E McFadden-Hiller

    Full Text Available Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents. We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula, primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99, with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping

  6. Spatial Distribution of Black Bear Incident Reports in Michigan.

    Science.gov (United States)

    McFadden-Hiller, Jamie E; Beyer, Dean E; Belant, Jerrold L

    2016-01-01

    Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents). We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula), primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC) to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99), with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping techniques to

  7. The development of cobalt-base alloy ball bearing

    International Nuclear Information System (INIS)

    Yu Xinshui; Chen Jianting; Wang Zaishu; Wang Ximei; Huang Chongming.

    1986-01-01

    The main technologies and experiences in developing a Cobalt-base alloy ball bearing are described. In the hardfacing of bearing races, a lower-hardness alloy of type St-6 is used rather than an alloy with hardness similar to that of the ball and finally the hardness of race is increased to match that of the ball by heat treatment. This improvement has certain advantages. The experience of whole developing technology indicates that strict control of the technology in the bearing-race hardfacing is the key problem in the quality assurance of bearings

  8. Functional brain response to food images in successful adolescent weight losers compared with normal-weight and overweight controls.

    Science.gov (United States)

    Jensen, Chad D; Kirwan, C Brock

    2015-03-01

    Research conducted with adults suggests that successful weight losers demonstrate greater activation in brain regions associated with executive control in response to viewing high-energy foods. No previous studies have examined these associations in adolescents. Functional neuroimaging was used to assess brain response to food images among groups of overweight (OW), normal-weight (NW), and successful weight-losing (SWL) adolescents. Eleven SWL, 12 NW, and 11 OW participants underwent functional magnetic resonance imaging while viewing images of high- and low-energy foods. When viewing high-energy food images, SWLs demonstrated greater activation in the dorsolateral prefrontal cortex (DLPFC) compared with OW and NW controls. Compared with NW and SWL groups, OW individuals demonstrated greater activation in the ventral striatum and anterior cingulate in response to food images. Adolescent SWLs demonstrated greater neural activation in the DLPFC compared with OW/NW controls when viewing high-energy food stimuli, which may indicate enhanced executive control. OW individuals' brain responses to food stimuli may indicate greater reward incentive processes than either SWL or NW groups. © 2015 The Obesity Society.

  9. Hydrodynamic Effects on Modeling and Control of a High Temperature Active Magnetic Bearing Pump with a Canned Rotor

    Energy Technology Data Exchange (ETDEWEB)

    Melin, Alexander M [ORNL; Kisner, Roger A [ORNL; Fugate, David L [ORNL; Holcomb, David Eugene [ORNL

    2015-01-01

    Embedding instrumentation and control Embedding instrumentation and control (I\\&C) at the component level in nuclear power plants can improve component performance, lifetime, and resilience by optimizing operation, reducing the constraints on physical design, and providing on-board prognostics and diagnostics. However, the extreme environments that many nuclear power plant components operate in makes embedding instrumentation and control at the component level difficult. Successfully utilizing embedded I\\&C requires developing a deep understanding of the system's dynamics and using that knowledge to overcome material and physical limitations imposed by the environment. In this paper, we will develop a coupled dynamic model of a high temperature (700 $^\\circ$C) canned rotor pump that incorporates rotordynamics, hydrodynamics, and active magnetic bearing dynamics. Then we will compare two control design methods, one that uses a simplified decoupled model of the system and another that utilizes the full coupled system model. It will be seen that utilizing all the available knowledge of the system dynamics in the controller design yield an order of magnitude improvement in the magnitude of the magnetic bearing response to disturbances at the same level of control effort, a large reduction in the settling time of the system, and a smoother control action.

  10. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  11. Factors predicting weight-bearing asymmetry 1month after unilateral total knee arthroplasty: a cross-sectional study.

    Science.gov (United States)

    Christiansen, Cory L; Bade, Michael J; Weitzenkamp, David A; Stevens-Lapsley, Jennifer E

    2013-03-01

    Factors predicting weight-bearing asymmetry (WBA) after unilateral total knee arthroplasty (TKA) are not known. However, identifying modifiable and non-modifiable predictors of WBA is needed to optimize rehabilitation, especially since WBA is negatively correlated to poor functional performance. The purpose of this study was to identify factors predictive of WBA during sit-stand transitions for people 1month following unilateral TKA. Fifty-nine people were tested preoperatively and 1month following unilateral TKA for WBA using average vertical ground reaction force under each foot during the Five Times Sit-to-Stand Test. Candidate variables tested in the regression analysis represented physical impairments (strength, muscle activation, pain, and motion), demographics, anthropometrics, and movement compensations. WBA, measured as the ratio of surgical/non-surgical limb vertical ground reaction force, was 0.69 (0.18) (mean (SD)) 1month after TKA. Regression analysis identified preoperative WBA (β=0.40), quadriceps strength ratio (β=0.31), and hamstrings strength ratio (β=0.19) as factors predictive of WBA 1month after TKA (R(2)=0.30). Greater amounts of WBA 1month after TKA are predicted by modifiable factors including habitual movement pattern and asymmetry in quadriceps and hamstrings strength. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Magnetic bearings promise reduced operation and maintenance costs

    International Nuclear Information System (INIS)

    Jones, G.

    1990-01-01

    Magnetic bearings are being incorporated into the design of the US DoE modular high temperature gas cooled reactor. The virtually maintenance-free bearing technology may have potential in other nuclear applications. In an active magnetic bearing, a stationary electromagnet (stator) and a rotating ferrous material (rotor) are used to allow a shaft to be suspended in a magnetic field. The position of the shaft is maintained dynamically using position sensors to provide a continuous feedback through a control and amplifier system to the electromagnetic poles which are used to suspend the shaft. Two separate systems are required: an axial positioning system, or thrust bearing, and a pair of radial positioning systems, or journal bearings. (author)

  13. Effect of Bidens pilosa extract on renal functions and some tumor markers of Ehrlich Ascites Carcinoma bearing mice exposed to γ-radiation

    International Nuclear Information System (INIS)

    El-Kabany, H.; Ibrahim, S.I.

    2013-01-01

    The Ethanolic extract of Bidens pilosa (EtBP) was tested in Swiss albino mice transplanted with Ehrlich ascites carcinoma (EAC) and exposed to γ-radiation. EAC mice received intraperitoneal (i.p) 250 mg/kg body weight EtBP for nine days , 24hr after tumor inoculation. Mice exposed to 4 Gy γ-radiation 30 min after the first dose of EtBP. Seventy female mice were classified into 6 groups (15 mice in each group) as follows, control, mice treated with EtBP for 9 consecutive days, mice bearing EAC cells, EAC bearing mice treated with EtBP, 24 hour after tumor inoculation, EAC bearing mice and irradiated, and EAC bearing mice treated with EtBP and exposed to γ-radiation. Five animals from each group were sacrificed 18 hr after administration of the last EtBP dose. Blood and ascetic fluid were collected and kidneys were removed for biochemical and histopathological studies. The remaining animals were observed daily for recording survival percentage and body weight. Results showed that treatment of EAC bearing mice with EtBP and/or exposure to γ- radiation increased the survival percentage of the animals and decreased their body weight compared to EAC group. Inoculation of mice with EAC cells resulted in biochemical and histopathological changes leading to kidney damage. Animals of EAC bearing mice with EtBP and /or exposure to γ- radiation significantly restored the elevated levels of serum urea and creatinine, tumor necrosis factor-alpha (TNF-α), metalo matrix protein (mmp-2 and mmp9), also the elevated level of lipid peroxidation (MDA) in kidneys tissue, compared to EAC group. On the other hand, a significantly decline was observed in glutathione (GSH) and super oxide dismutase (SOD) contents in kidney tissue of EAC group. Treatment of EAC bearing mice with EtBP and/or exposure to γ-radiation resulted in increase GSH and SOD in kidney tissue and increased caspase-3 in ascetic fluid, comparing to EAC group. It could be concluded that EtBP through its antioxidant

  14. Temporal trends and future predictions of mercury concentrations in Northwest Greenland polar bear (Ursus maritimus) hair.

    Science.gov (United States)

    Dietz, R; Born, E W; Rigét, F; Aubail, A; Sonne, C; Drimmie, R; Basu, N

    2011-02-15

    Hair samples from 117 Northwest Greenland polar bears (Ursus maritimus) were taken during 1892-2008 and analyzed for total mercury (hereafter Hg). The sample represented 28 independent years and the aim of the study was to analyze for temporal Hg trends. Mercury concentrations showed yearly significant increases of 1.6-1.7% (p polar bear Hg exposure is 95.6-96.2% anthropogenic in its origin. Assuming a continued anthropogenic increase, this model estimated concentrations in 2050 and 2100 will be 40- and 92-fold the baseline concentration, respectively, which is equivalent to a 97.5 and 98.9% man-made contribution. None of the 2001-2008 concentrations of Hg in Northwest Greenland polar bear hair exceeded the general guideline values of 20-30 μg/g dry weight for terrestrial wildlife, whereas the neurochemical effect level of 5.4 μg Hg/g dry weight proposed for East Greenland polar bears was exceeded in 93.5% of the cases. These results call for detailed effect studies in main target organs such as brain, liver, kidney, and sexual organs in the Northwest Greenland polar bears.

  15. Passive magnetic bearing system

    Science.gov (United States)

    Post, Richard F.

    2014-09-02

    An axial stabilizer for the rotor of a magnetic bearing provides external control of stiffness through switching in external inductances. External control also allows the stabilizer to become a part of a passive/active magnetic bearing system that requires no external source of power and no position sensor. Stabilizers for displacements transverse to the axis of rotation are provided that require only a single cylindrical Halbach array in its operation, and thus are especially suited for use in high rotation speed applications, such as flywheel energy storage systems. The elimination of the need of an inner cylindrical array solves the difficult mechanical problem of supplying support against centrifugal forces for the magnets of that array. Compensation is provided for the temperature variation of the strength of the magnetic fields of the permanent magnets in the levitating magnet arrays.

  16. Good intentions gone awry? Effects of weight-related social control on health and well-being.

    Science.gov (United States)

    Brunson, Julie A; Overup, Camilla S; Nguyen, Mai-Ly; Novak, Sarah A; Smith, C Veronica

    2014-01-01

    A negative body image has been associated with a variety of negative health and well-being outcomes. Social pressures from others, in the form of weight-related social control, may serve to exacerbate this effect, especially for college-aged women. Undergraduate students (N=399) completed a variety of questionnaires assessing weight-related social control, well-being, and diet and exercise behaviors. The results suggest that weight is associated with a variety of negative health and well-being outcomes and particularly for women, weight-related social control is also associated with these negative effects. In addition, men of higher body mass indexes (BMIs) or higher self-perceived weight did not experience negative health and well-being outcomes to the same degree that overweight women did. Parents in particular seem to instigate weight-related social control to change students' diet and exercise behaviors. These results help clarify the effects of weight-related social control in a college population, where weight may be especially important. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Experimental and Numerical Simulation of Unbalance Response in Vertical Test Rig with Tilting-Pad Bearings

    Directory of Open Access Journals (Sweden)

    Mattias Nässelqvist

    2014-01-01

    Full Text Available In vertically oriented machines with journal bearing, there are no predefined static radial loads, such as dead weight for horizontal rotor. Most of the commercial software is designed to calculate rotordynamic and bearing properties based on machines with a horizontally oriented rotor; that is, the bearing properties are calculated at a static eccentricity. For tilting-pad bearings, there are no existing analytical expressions for bearing parameters and the bearing parameters are dependent on eccentricity and load angle. The objective of this paper is to present a simplified method to perform numerical simulations on vertical rotors including bearing parameters. Instead of recalculating the bearing parameters in each time step polynomials are used to represent the bearing parameters for present eccentricities and load angles. Numerical results are compared with results from tests performed in a test rig. The test rig consists of two guide bearings and a midspan rotor. The guide bearings are 4-pad tilting-pad bearings. Shaft displacement and strains in the bearing bracket are measured to determine the test rig’s properties. The comparison between measurements and simulated results shows small deviations in absolute displacement and load levels, which can be expected due to difficulties in calculating exact bearing parameters.

  18. Weight-related sport motive and girls’ body image, weight control behaviors and self-esteem

    NARCIS (Netherlands)

    de Bruin, A.P.; Woertman, L.; Bakker, F.C.; Oudejans, R.R.D.

    2009-01-01

    Research has shown that exercise for weight control is associated with disordered eating indices in older adolescent or adult exercisers in fitness centers. This study examined whether these relationships could be replicated in a more general sample of 140 Dutch adolescent girls between 13 and 18

  19. A novel structure of permanent-magnet-biased radial hybrid magnetic bearing

    International Nuclear Information System (INIS)

    Sun Jinji; Fang Jiancheng

    2011-01-01

    The paper proposes a novel structure for a permanent-magnet-biased radial hybrid magnetic bearing. Based on the air gap between the rotor and stator of traditional radial hybrid magnetic bearings, a subsidiary air gap is first constructed between the permanent magnets and the inner magnetic parts. Radial magnetic bearing makes X and Y magnetic fields independent of each other with separate stator poles, and the subsidiary air gap makes control flux to a close loop. As a result, magnetic field coupling of the X and Y channels is decreased significantly by the radial hybrid magnetic bearing and makes it easier to design control systems. Then an external rotor structure is designed into the radial hybrid magnetic bearing. The working principle of the radial hybrid magnetic bearing and its mathematical model is discussed. Finally, a non-linear magnetic network method is proposed to analyze the radial hybrid magnetic bearing. Simulation results indicate that magnetic fields in the two channels of the proposed radial hybrid magnetic bearing decouple well from each other.

  20. A novel structure of permanent-magnet-biased radial hybrid magnetic bearing

    Energy Technology Data Exchange (ETDEWEB)

    Sun Jinji, E-mail: sunjinji@aspe.buaa.edu.c [Key Laboratory of Fundamental Science for National Defense, Novel Inertial Instrument and Navigation System Technology, School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, 100191 (China); Fang Jiancheng [Key Laboratory of Fundamental Science for National Defense, Novel Inertial Instrument and Navigation System Technology, School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, 100191 (China)

    2011-01-15

    The paper proposes a novel structure for a permanent-magnet-biased radial hybrid magnetic bearing. Based on the air gap between the rotor and stator of traditional radial hybrid magnetic bearings, a subsidiary air gap is first constructed between the permanent magnets and the inner magnetic parts. Radial magnetic bearing makes X and Y magnetic fields independent of each other with separate stator poles, and the subsidiary air gap makes control flux to a close loop. As a result, magnetic field coupling of the X and Y channels is decreased significantly by the radial hybrid magnetic bearing and makes it easier to design control systems. Then an external rotor structure is designed into the radial hybrid magnetic bearing. The working principle of the radial hybrid magnetic bearing and its mathematical model is discussed. Finally, a non-linear magnetic network method is proposed to analyze the radial hybrid magnetic bearing. Simulation results indicate that magnetic fields in the two channels of the proposed radial hybrid magnetic bearing decouple well from each other.

  1. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    The use of fluid power to reduce and control rotor vibration in rotating machines is investigated. An active hybrid bearing is studied, whose main objective is to reduce wear and vibration between rotating and stationary machinery parts. By injecting pressurised oil into the oil film, through...... orifices machined in the bearing pads, one can alter the machine dynamic characteristics, thus enhancing its operational range. A mathematical model of the rotor-bearing system, as well as of the hydraulic system, is presented. Numerical results of the system frequency response show good agreement...

  2. Active magnetic bearings: As applied to centrifugal pumps

    Science.gov (United States)

    Nelik, Lev; Cooper, Paul; Jones, Graham; Galecki, Dennis; Pinckney, Frank; Kirk, Gordon

    1992-05-01

    Application of magnetic bearings to boiler feed pumps presents various attractive features, such as longer bearing life, lower maintenance costs, and improved operability through control of the rotordynamics. Magnetic bearings were fitted to an eight-stage, 600 hp boiler feed pump, which generates 2600 ft of heat at 680 gpm and 3560 rpm. In addition to the varied and severe operating environment in steady state operation of this pump in a power plant, it is also subjected to transient loads during frequent starts and stops. These loads can now be measured by the in-built instrumentation of the magnetic bearings. Following site installation, a follow-up bearing tune-up was performed, and pump transient response testing was conducted. The bearing response was completely satisfactory, ensuring trouble-free pump operation even in the range of reduced load. The experience gained so far through design and testing proves feasibility of magnetic bearings for boiler feed pumps, which sets the stage for application of even higher energy centrifugal pumps equipped with magnetic bearings.

  3. Effectiveness of elastic band-type ankle–foot orthoses on postural control in poststroke elderly patients as determined using combined measurement of the stability index and body weight-bearing ratio

    Directory of Open Access Journals (Sweden)

    Kim JH

    2015-11-01

    Full Text Available Jong Hyun Kim, Woo Sang Sim, Byeong Hee Won Usability Evaluation Technology Center, Advanced Biomedical and Welfare R&D Group, Korea Institute of Industrial Technology, Cheonan-si, Chungcheongnam-do, South Korea Purpose: Poor recovery of postural stability poststroke is the primary cause of impairment in activities and social participation in elderly stroke survivors. The purpose of our study was to experimentally evaluate the effectiveness of our new elastic ankle–foot orthosis (AFO, compared to a traditional AFO fabricated with hard plastic, in improving postural stability in elderly chronic stroke survivors. Patients and methods: Postural stability was evaluated in ten chronic stroke patients, 55.7±8.43 years old. Postural stability was evaluated using the standardized methods of the Biodex Balance System combined with a foot pressure system, under three experimental conditions, no AFO, rigid plastic AFO, and elastic AFO (E-AFO. The following dependent variables of postural stability were analyzed: plantar pressure under the paretic and nonparetic foot, area of the center of balance (COB and % time spent in each location, distance traveled by the COB away from the body center, distance traveled by the center of pressure, and calculated index of overall stability, as well as indices anterior–posterior and medial–lateral stability. Results: Both AFO designs improved all indices of postural stability. Compared to the rigid plastic AFO, the E-AFO produced additional positive effects in controlling anterior–posterior body sway, equalizing weight bearing through the paretic and nonparetic limbs, and restraining the displacement of the center of pressure and of the COB. Conclusion: Based on our outcomes, we recommend the prescription of E-AFOs as part of a physiotherapy rehabilitation program to promote recovery of postural stability poststroke. When possible, therapeutic outcomes should be documented using the Biodex Balance System and

  4. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of..., 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and Black Bear Development Holdings, LLC and Black Bear SO, LLC (transferees) filed an application for the partial the transfer of licenses...

  5. Rotational characteristics in the resonance state of the HTSC-permanent magnet hybrid magnetic bearing

    Energy Technology Data Exchange (ETDEWEB)

    Morii, Y.; Sukedai, M. [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan); Ohashi, S., E-mail: ohashi@kansai-u.ac.jp [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan)

    2011-11-15

    The hybrid magnetic bearing has been developed. In the hybrid system, effect of the pinning force becomes smaller. Influence of the vibration and the gradient angle in the resonance state is large. The resonance frequency becomes small in the hybrid bearing system. The hybrid magnetic bearing using permanent magnets and the high-Tc bulk superconductor (HTSC) has been developed. Repulsive force of the permanent magnet is introduced to increase the load weight of the magnetic bearing. Effect of the hybrid system has been shown. In this paper, influence of the hybrid system on the dynamic characteristics of the rotor is studied. The rotational characteristics in the mechanical resonance state are studied, and the equivalent magnetic spring coefficient is estimated from the experimental results of the load weight. The resonance frequency is measured by the rotation experiments. The rotor achieves stable levitation even in the resonance state. In the hybrid system, effect of the pinning force becomes smaller than that of the lateral force generated by the repulsive force between the two permanent magnets at the smaller air gap. Thus influence of the lateral vibration and the gradient angle in the resonance state becomes larger at a smaller air gap. The equivalent magnetic spring coefficient becomes also small, and the resonance frequency becomes small in the hybrid bearing system.

  6. Psychosocial and behavioural factors in the regulation of weight: Self-regulation, self-efficacy and locus control.

    Science.gov (United States)

    Menéndez-González, Lara; Orts-Cortés, María Isabel

    To identify the relationship and behaviour of the variables of self-control, self-efficacy and locus control in weight regulation of obese, overweight and normal weight adults. Transversal study undertaken in the Health Centre of El Coto (Gijón) from 1st April to 30th July 2015. Subjects between 18-65 years of age with a body mass index recording within the last two years. serious medical illness, eating disorders or pregnant women. Behavioural variables: self-regulation of body weight (Inventory of self-control of body weight), perceived self-efficacy in weight regulation (Inventory of perceived self-efficacy in weight regulation) and locus control in weight regulation (Inventory of locus control in weight regulation). Anthropometric variables: weight (kg) and height (m), body mass index. One hundred and six participants were included: 32 were obese, 28 overweight and 46 normal weight. Significant differences were found between the 3 study groups for total scale of self-efficacy (F=61.77; pcontrol (F=13.92; p=.019), other weighty influences of locus control (F=9.21; pcontrol (F=3.50; p=.011). The relationship between body mass index and behavioural variables of self-efficacy, self-regulation and locus control, suggests the need for healthcare professionals to include psychological factors of behaviour in any preventive action and intervention directed at weight control. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

  7. Phylogeography of mitochondrial DNA variation in brown bears and polar bears.

    Science.gov (United States)

    Shields, G F; Adams, D; Garner, G; Labelle, M; Pietsch, J; Ramsay, M; Schwartz, C; Titus, K; Williamson, S

    2000-05-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples. Copyright 2000 Academic Press.

  8. Phylogeography of mitochondrial DNA variation in brown bears and polar bears

    Science.gov (United States)

    Shields, Gerald F.; Adams, Deborah; Garner, Gerald W.; Labelle, Martine; Pietsch, Jacy; Ramsay, Malcolm; Schwartz, Charles; Titus, Kimberly; Williamson, Scott

    2000-01-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples.

  9. Quality assurance during fabrication of high-damping rubber isolation bearings

    Energy Technology Data Exchange (ETDEWEB)

    Way, D.; Greaves, W.C. [Base Isolation Consultants, Inc., San Francisco, CA (United States)

    1995-12-01

    Successful implementation of a high-damping rubber (HDR) base isolation project requires the application of Quality Assurance/Quality Control (QA/QC) methodology through all phases of the bearing fabrication process. HDR base isolation bearings must be fabricated with uniform physical characteristics while being produced in large quantities. To satisfy this requirement, manufacturing processes must be controlled. Prototype tests that include dynamic testing of small samples of rubber are necessary. Stringent full scale bearing testing must be carried out prior to beginning production, during which manufacturing is strictly regulated by small rubber sample and production bearing testing. All such activities should be supervised and continuously inspected by independent and experienced QA/QC personnel.

  10. Body Weight and Breast Cancer: Nested Case-Control Study in Southern Brazil.

    Science.gov (United States)

    Kops, Natália Luiza; Bessel, Marina; Caleffi, Maira; Ribeiro, Rodrigo Antonini; Wendland, Eliana Marcia

    2018-04-28

    Current studies have shown that fast weight gain may be more important than body mass index on the incidence of breast cancer. The aim of this study was to evaluate the association between body weight and breast cancer. This was a case-control study nested in a cohort of a breast cancer mammography screening program in Southern Brazil. A trained investigator administered a standardized interview to collect sociodemographic and clinical data, and body weight history (weight at menarche, at marriage, at first and last pregnancy, and at menopause). Current anthropometric measurements were also made. Fifty-seven women with cancer (66.7% postmenopausal) and 159 controls were included. Current age (60.3 ± 10.4 vs. 55.8 ± 8.4 years, P weight at different stages of life. Women with social vulnerability recruited at a mammography screening program in Southern Brazil showed a large weight gain during life, but no significant differences were found in body weight between women with or without breast cancer. Copyright © 2018 Elsevier Inc. All rights reserved.

  11. Optimization of Gad Pattern with Geometrical Weight

    International Nuclear Information System (INIS)

    Chang, Do Ik; Woo, Hae Seuk; Choi, Seong Min

    2009-01-01

    The prevailing burnable absorber for domestic nuclear power plants is a gad fuel rod which is used for the partial control of excess reactivity and power peaking. The radial peaking factor, which is one of the critical constraints for the plant safety depends largely on the number of gad bearing rods and the location of gad rods within fuel assembly. Also the concentration of gad, UO 2 enrichment in the gad fuel rod, and fuel lattice type play important roles for the resultant radial power peaking. Since fuel is upgraded periodically and longer fuel cycle management requires more burnable absorbers or higher gad weight percent, it is required frequently to search for the optimized gad patterns, i.e., the distribution of gad fuel rods within assembly, for the various fuel environment and fuel management changes. In this study, the gad pattern optimization algorithm with respect to radial power peaking factor using geometrical weight is proposed for a single gad weight percent, in which the candidates of the optimized gad pattern are determined based on the weighting of the gad rod location and the guide tube. Also the pattern evaluation is performed systematically to determine the optimal gad pattern for the various situation

  12. Manual centrifuge system: Bearing-based hand spinner made with 3-D printer.

    Science.gov (United States)

    Sun-Young Yoo; Seung Jae Lee; Jong-Mo Seo

    2017-07-01

    Compact disk (CD) Microfluidic platforms are being studied for medical applications such as blood tests. However, its size is bulky and electricity is needed to realize centrifuge force. In this paper, bearing-based hand spinner is designed using three-dimensional printer. This spinner does not need electricity and keeps rotating direction unlike paperfuge while it is spinning. The properties of spinner vary depending on bearing type which is positioned at the center. The type of weighting area also affects change in RPM over time. When a separation experiment is implemented, separating mixture into red ink and oil and whole blood into red blood cell and plasma are achieved properly with ceramic ball bearing.

  13. Pronounced expression of the lipolytic inhibitor G0/G1 Switch Gene 2 (G0S2) in adipose tissue from brown bears (Ursus arctos) prior to hibernation.

    Science.gov (United States)

    Jessen, Niels; Nielsen, Thomas S; Vendelbo, Mikkel H; Viggers, Rikke; Støen, Ole-Gunnar; Evans, Alina; Frøbert, Ole

    2016-04-01

    Prior to hibernation, the brown bear (Ursus arctos) exhibits unparalleled weight gain. Unlike humans, weight gain in bears is associated with lower levels of circulating free fatty acids (FFA) and increased insulin sensitivity. Understanding how free-ranging brown bears suppress lipolysis when gaining weight may therefore provide novel insight toward the development of human therapies. Blood and subcutaneous adipose tissue were collected from immobilized free-ranging brown bears (fitted with GPS-collars) during hibernation in winter and from the same bears during the active period in summer in Dalarna, Sweden. The expression of lipid droplet-associated proteins in adipose tissue was examined under the hypothesis that bears suppress lipolysis during summer while gaining weight by increased expression of negative regulators of lipolysis. Adipose triglyceride lipase (ATGL) expression did not differ between seasons, but in contrast, the expression of ATGL coactivator Comparative gene identification-58 (CGI-58) was lower in summer. In addition, the expression of the negative regulators of lipolysis, G0S2 and cell-death inducing DNA fragmentation factor-a-like effector (CIDE)C markedly increased during summer. Free-ranging brown bears display potent upregulation of inhibitors of lipolysis in adipose tissue during summer. This is a potential mechanism for increased insulin sensitivity during weight gain and G0S2 may serve as a target to modulate insulin sensitivity. © 2016 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of the American Physiological Society and The Physiological Society.

  14. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

  15. Weight-Control Information Network

    Science.gov (United States)

    ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ...

  16. Improvement of Zinc Coating Weight Control for Transition of Target Change

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chien Ming; Lin, Jeong Hwa; Hsu, Tse Wei; Lin, Rui Rong [China Steel Corporation, Kaohsiung (China)

    2010-06-15

    The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/m{sup 2} on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an L{sub 9}(3{sup 4}) orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15%.

  17. Elearning approaches to prevent weight gain in young adults: A randomized controlled study.

    Science.gov (United States)

    Nikolaou, Charoula Konstantia; Hankey, Catherine Ruth; Lean, Michael Ernest John

    2015-12-01

    Preventing obesity among young adults should be a preferred public health approach given the limited efficacy of treatment interventions. This study examined whether weight gain can be prevented by online approaches using two different behavioral models, one overtly directed at obesity and the other covertly. A three-group parallel randomized controlled intervention was conducted in 2012-2013; 20,975 young adults were allocated a priori to one control and two "treatment" groups. Two treatment groups were offered online courses over 19 weeks on (1) personal weight control ("Not the Ice Cream Van," NTICV) and, (2) political, environmental, and social issues around food ("Goddess Demetra," "GD"). Control group received no contact. The primary outcome was weight change over 40 weeks. Within-group 40-week weight changes were different between groups (P < 0.001): Control (n = 2,134): +2.0 kg (95% CI = 1.5, 2.3 kg); NTICV (n = 1,810): -1.0 kg (95% CI = -1.3, -0.5); and GD (n = 2,057): -1.35 kg (95% CI = -1.4 to -0.7). Relative risks for weight gain vs. NTICV = 0.13 kg (95% CI = 0.10, 0.15), P < 0.0001; GD = 0.07 kg (95% CI = 0.05, 0.10), P < 0.0001. Both interventions were associated with prevention of the weight gain observed among control subjects. This low-cost intervention could be widely transferable as one tool against the obesity epidemic. Outside the randomized controlled trial setting, it could be enhanced using supporting advertising and social media. © 2015 The Obesity Society.

  18. Quantifying feedforward control: a linear scaling model for fingertip forces and object weight.

    Science.gov (United States)

    Lu, Ying; Bilaloglu, Seda; Aluru, Viswanath; Raghavan, Preeti

    2015-07-01

    The ability to predict the optimal fingertip forces according to object properties before the object is lifted is known as feedforward control, and it is thought to occur due to the formation of internal representations of the object's properties. The control of fingertip forces to objects of different weights has been studied extensively by using a custom-made grip device instrumented with force sensors. Feedforward control is measured by the rate of change of the vertical (load) force before the object is lifted. However, the precise relationship between the rate of change of load force and object weight and how it varies across healthy individuals in a population is not clearly understood. Using sets of 10 different weights, we have shown that there is a log-linear relationship between the fingertip load force rates and weight among neurologically intact individuals. We found that after one practice lift, as the weight increased, the peak load force rate (PLFR) increased by a fixed percentage, and this proportionality was common among the healthy subjects. However, at any given weight, the level of PLFR varied across individuals and was related to the efficiency of the muscles involved in lifting the object, in this case the wrist and finger extensor muscles. These results quantify feedforward control during grasp and lift among healthy individuals and provide new benchmarks to interpret data from neurologically impaired populations as well as a means to assess the effect of interventions on restoration of feedforward control and its relationship to muscular control. Copyright © 2015 the American Physiological Society.

  19. On The Modeling Of Hybrid Aerostatic - Gas Journal Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2010-01-01

    of a compressible fluid film journal bearing. Control forces are generated by injecting pressurized air into the bearing gap through orifices located on the bearing walls. A modified form of the compressible Reynolds equation for active lubrication is derived. By solving this equation, stiffness and damping......Gas journal bearing have been increasingly adopted in modern turbo-machinery applications, as they meet the demands of operation at higher rotational speeds, in clean environment and great efficiency. Due to the fact that gaseous lubricants, typically air, have much lower viscosity than more...

  20. Holiday Weight Management by Successful Weight Losers and Normal Weight Individuals

    Science.gov (United States)

    Phelan, Suzanne; Wing, Rena R.; Raynor, Hollie A.; Dibello, Julia; Nedeau, Kim; Peng, Wanfeng

    2008-01-01

    This study compared weight control strategies during the winter holidays among successful weight losers (SWL) in the National Weight Control Registry and normal weight individuals (NW) with no history of obesity. SWL (n = 178) had lost a mean of 34.9 kg and had kept greater than or equal to 13.6 kg off for a mean of 5.9 years. NW (n = 101) had a…

  1. A Optimal Dimension Parameters Design of Needle Roller Bearings Considering Multi Factors Affecting Life

    Science.gov (United States)

    Bai, XiaoBo; Li, Bo

    2017-12-01

    Taking into many influencing factors, a Needle Roller Bearings life calculation model was established using the Influence coefficient method and ISO formula. Take this model as the optimization objective function, some optimization variables were determined, and these variables were added constraint conditions. Using dynamic nonlinear strategy to improve the inertia weight, the arccosine strategy to adjust the learning factor, function constraints was solved by the methods of ensure particle legitimacy. Nonlinear optimization design of cylindrical roller bearings was realized by Improved Particle Swarm Algorithm. The proposed method of bearing design was verified effective by test of the optimization results.

  2. GM1-gangliosidosis in American black bears: clinical, pathological, biochemical and molecular genetic characterization.

    Science.gov (United States)

    Muthupalani, Sureshkumar; Torres, Paola A; Wang, Betty C; Zeng, Bai Jin; Eaton, Samuel; Erdelyi, Ildiko; Ducore, Rebecca; Maganti, Rajanikarath; Keating, John; Perry, Bain J; Tseng, Florina S; Waliszewski, Nicole; Pokras, Mark; Causey, Robert; Seger, Rita; March, Philip; Tidwell, Amy; Pfannl, Rolf; Seyfried, Thomas; Kolodny, Edwin H; Alroy, Joseph

    2014-04-01

    G(M1)-gangliosidosis is a rare progressive neurodegenerative disorder due to an autosomal recessively inherited deficiency of lysosomal β-galactosidase. We have identified seven American black bears (Ursus americanus) found in the Northeast United States suffering from G(M1)-gangliosidosis. This report describes the clinical features, brain MRI, and morphologic, biochemical and molecular genetic findings in the affected bears. Brain lipids were compared with those in the brain of a G(M1)-mouse. The bears presented at ages 10-14 months in poor clinical condition, lethargic, tremulous and ataxic. They continued to decline and were humanely euthanized. The T(2)-weighted MR images of the brain of one bear disclosed white matter hyperintensity. Morphological studies of the brain from five of the bears revealed enlarged neurons with foamy cytoplasm containing granules. Axonal spheroids were present in white matter. Electron microscopic examination revealed lamellated membrane structures within neurons. Cytoplasmic vacuoles were found in the liver, kidneys and chondrocytes and foamy macrophages within the lungs. Acid β-galactosidase activity in cultured skin fibroblasts was only 1-2% of control values. In the brain, ganglioside-bound sialic acid was increased more than 2-fold with G(M1)-ganglioside predominating. G(A1) content was also increased whereas cerebrosides and sulfatides were markedly decreased. The distribution of gangliosides was similar to that in the G(M1)-mouse brain, but the loss of myelin lipids was greater in the brain of the affected bear than in the brain of the G(M1) mouse. Isolated full-length cDNA of the black bear GLB1 gene revealed 86% homology to its human counterpart in nucleotide sequence and 82% in amino acid sequence. GLB1 cDNA from liver tissue of an affected bear contained a homozygous recessive T(1042) to C transition inducing a Tyr348 to His mutation (Y348H) within a highly conserved region of the GLB1 gene. The coincidence of several

  3. Advanced Active-Magnetic-Bearing Thrust-Measurement System

    Science.gov (United States)

    Imlach, Joseph; Kasarda, Mary; Blumber, Eric

    2008-01-01

    An advanced thrust-measurement system utilizes active magnetic bearings to both (1) levitate a floating frame in all six degrees of freedom and (2) measure the levitation forces between the floating frame and a grounded frame. This system was developed for original use in measuring the thrust exerted by a rocket engine mounted on the floating frame, but can just as well be used in other force-measurement applications. This system offers several advantages over prior thrust-measurement systems based on mechanical support by flexures and/or load cells: The system includes multiple active magnetic bearings for each degree of freedom, so that by selective use of one, some, or all of these bearings, it is possible to test a given article over a wide force range in the same fixture, eliminating the need to transfer the article to different test fixtures to obtain the benefit of full-scale accuracy of different force-measurement devices for different force ranges. Like other active magnetic bearings, the active magnetic bearings of this system include closed-loop control subsystems, through which the stiffness and damping characteristics of the magnetic bearings can be modified electronically. The design of the system minimizes or eliminates cross-axis force-measurement errors. The active magnetic bearings are configured to provide support against movement along all three orthogonal Cartesian axes, and such that the support along a given axis does not produce force along any other axis. Moreover, by eliminating the need for such mechanical connections as flexures used in prior thrust-measurement systems, magnetic levitation of the floating frame eliminates what would otherwise be major sources of cross-axis forces and the associated measurement errors. Overall, relative to prior mechanical-support thrust-measurement systems, this system offers greater versatility for adaptation to a variety of test conditions and requirements. The basic idea of most prior active-magnetic-bearing

  4. School-based obesity policy, social capital, and gender differences in weight control behaviors.

    Science.gov (United States)

    Zhu, Ling; Thomas, Breanca

    2013-06-01

    We examined the associations among school-based obesity policies, social capital, and adolescents' self-reported weight control behaviors, focusing on how the collective roles of community and adopted policies affect gender groups differently. We estimated state-level ecologic models using 1-way random effects seemingly unrelated regressions derived from panel data for 43 states from 1991 to 2009, which we obtained from the Centers for Disease Control and Prevention's Youth Risk Behavior Surveillance System. We used multiplicative interaction terms to assess how social capital moderates the effects of school-based obesity policies. School-based obesity policies in active communities were mixed in improving weight control behaviors. They increased both healthy and unhealthy weight control behaviors among boys but did not increase healthy weight control behaviors among girls. Social capital is an important contextual factor that conditions policy effectiveness in large contexts. Heterogeneous behavioral responses are associated with both school-based obesity policies and social capital. Building social capital and developing policy programs to balance outcomes for both gender groups may be challenging in managing childhood obesity.

  5. Preadolescents' and Parents' Dietary Coping Efficacy during Behavioral Family-Based Weight Control Treatment

    Science.gov (United States)

    Theim, Kelly R.; Sinton, Meghan M.; Stein, Richard I.; Saelens, Brian E.; Thekkedam, Sucheta C.; Welch, R. Robinson; Epstein, Leonard H.; Wilfley, Denise E.

    2012-01-01

    Developmentally relevant high-risk dietary situations (e.g., parties where tempting foods are available) may influence overweight youth's weight control, as they increase risk for overeating. Better self-efficacy for coping with these situations--which preadolescents may learn from their parents--could foster successful weight control. Overweight…

  6. Obesity and weight control measures: Findings from female college students of Agra

    Directory of Open Access Journals (Sweden)

    H K Thakkar

    2013-01-01

    Full Text Available Context: Obesity has negative health impacts. Obese people have higher risk of non-communicable diseases (NCDs. Overweight and obesity during young adulthood can track into later adulthood along with its higher risk for NCDs. Aims: To identify the weight control intention and dietary practices used among normal, overweight, and obese college females and to know the reasons for discontinuation among ever tried subjects. Settings and Design : A cross-sectional study conducted in urban and rural colleges of Agra. Materials and Methods: This was a cross-sectional study among 400 female college students. Height and weight were measured to assess body composition according to BMI (Body Mass Index criteria (WHO 2002. Study included a semi-structured and semi-open-ended instrument to assess practices related to weight control. Their responses were collected, tabulated, analyzed, and interpreted. Statistical analysis used: Frequency. Results: The prevalence of overweight and obesity was found to be 18.5% and 4.5%, respectively, according to BMI (WHO 2002. One third of the subjects were recording their weight monthly. Slightly less than half of the subjects (46% were trying to maintain optimum weight. Almost one third of these subjects (33.5% were presently trying to lose weight. About one fifth of total 400 subjects (20.5% were not concerned about their weight status. Majority of the subjects (85% irrespective of their obesity status did not take any professional advice. More than half (52.7% were resorting to physical activity to lose weight. Taking more fruits/vegetables (44.7% was found to be the most common healthy dieting practices and most unhealthy was fasting (15.3%. More than one fourth (28.8% of the subjects abandoned weight control practices because of shortage of time followed by 22.4% due to physical weakness. Conclusions: Collectively, results indicate female college students, regardless of weight status, would benefit from open discussions

  7. Developing a consumer evaluation tool of weight control strategy advertisements on the Internet.

    Science.gov (United States)

    Luevorasirikul, Kanokrat; Gray, Nicola J; Anderson, Claire W

    2008-06-01

    To develop two evaluation tools for weight loss and weight gain advertisements on the Internet in order to help consumers to evaluate the quality of information within these advertisements. One hundred websites identified by Internet search engines for weight loss and weight gain strategies (50 websites each) were evaluated using two specific scoring instruments, developed by adapting questions from the 'DISCERN' tool and reviewing all related weight control guidelines and advertising regulations. The validity and reliability of the adapted tools were tested. Our evaluation tools rated the information from most websites as poor quality (70%). In the case of weight loss strategies, statements about rapid (18%) and permanent (28%) weight loss caused concern as well as lack of sensible advice about dieting and a lack of product warnings (84%). Safety concerns relating to weight gain products were the lack of warnings about side effects in products containing steroids and creatine (92%). The adapted tools exhibited acceptable validity and reliability. Quality of information within weight control advertisements on the Internet was generally poor. Problems of false claims, little advice on healthy ways to modify weight and few warnings on side effects have been highlighted in this study.

  8. Design and Experiment of Auxiliary Bearing for Helium Blower of HTR-PM

    International Nuclear Information System (INIS)

    Yang Guojun; Shi Zhengang; Liu Xingnan; Zhao Jingjing

    2014-01-01

    The helium blower is the important equipment for HTR-PM. Active magnetic bearing (AMB) instead of mechanical bearing is selected to support the rotor of the helium blower. However, one implication of AMB is the requirement to provide the auxiliary bearing to mitigate the effects of failures or overload conditions. The auxiliary bearing is used to support the rotor when the AMB fails to work. It must support the dropping rotor and bear the great impact force and friction heat. The design of the auxiliary bearing is one of the challenging problems in the whole system. It is very important for the helium blower with AMB of HTR-PM to make success. The rotor’s length of helium blower of HTR-PM is about 3.3 m, its weight is about 4000 kg and the rotating speed is 4000 r/min. The axial load is 4500kg, and the radial load is 1950kg. The angular contact ball bearing was selected as the auxiliary bearing. The test rig has been finished. It is difficult to analyze the falling course of the rotor. The preliminary analysis of the dropping rotor was done in the special condition. The impact force of auxiliary bearing was computed for the axial and radial load. And the dropping test of the blower rotor for HTR-10 will be introduced also in this paper. Results offer the important theoretical base for the protector design of the helium blower with AMB for HTR-PM. (author)

  9. Study on interstitial brachytherapy using 103Pd seeds on tumor-bearing rats

    International Nuclear Information System (INIS)

    Feng Huiru; Zhang Jingming; Tian Jiahe; Ding Weimin; Bai Hongsheng; Jin Xiaohai

    2003-01-01

    The effects of low-dose-rate brachytherapy are investigated in tumor-bearing rat. Walker 256 cells are transplanted subcutaneously with a trocar in the left leg of rats (Wistar). Two weeks later, rats with a tumor of 10 mm in mean diameter are divided into three groups (10 per group). Two groups are given 1 seed and 2 seeds implantation of 103 Pd, respectively, the third group is as an untreated control. Tumor size is measured twice a week until the 25th day when the rats are killed. Tumor is monitored either by palpation or further confirmed by histopathology. Kaplan-Meier statistic method is performed for survival analysis. The results show that the average weight of rats in untreated group is lower than in radiation groups (P 0.05). Tumor volumes in all treatment groups increase more obviously than in control till 16 days post-implantation. Tumor regression rate in 1 seed group is higher than in control group and in 2 seeds group. Although survival analysis show that the median survival time in 1 seed, 2 seeds and control groups are 24±0, 21±2 and 19±2 days with survival rate of 80%, 60% and 50% respectively, no significant differences are seen in all groups. So, brachytherapy with 103 Pd seed is effective on tumor-bearing rats. The implantation of seed can cause tumor edema in a self-limited way. A reasonable doses chosen for brachytherapy may play a role in treatment success

  10. Inhibiting effect of plasma from normal and tumour bearing mice on the mitotic rate of regenerating liver.

    Science.gov (United States)

    Echave Llanos, J M; Moreno, F R; Badrán, A F

    1986-01-01

    Plasma from normal mice and from mice bearing the ES2 transplantable malignant tumour was injected intraperitoneally at a dose of 0.01 ml/g body weight in partially hepatectomized mice. Control animals were injected with a solution of sodium citrate in saline. The recipients were killed at the first (14:00 hours/48 h). These times are the time of day and the number of h after partial hepatectomy and second (14:00 hours/72 h) peak times after partial hepatectomy. The number of colchicine metaphases per 1000 nuclei was determined for hepatocytes and litoral cells. A different effect was obtained with plasma from tumour-bearing compared with normal mice. Plasma from both sources when injected 26 h after partial hepatectomy (16:00 hours/26 h) inhibited the mitotic activity of hepatocytes at the next peak of regenerative activity (14:00 hours/48 h). The plasma from tumour-bearing mice also inhibited the peak on the following day (14:00 hours/72 h), whereas plasma from normal mice had no inhibitory effect and, indeed, a compensatory wave was observed at this time. Furthermore, plasma from tumour-bearing mice also showed an inhibitory effect at the first peak (14:00 hours/48 h) when injected at the time of partial hepatectomy (14:00 hours/00 h) or at 22 h before partial hepatectomy (16:00 hours/-22 h) whereas the injection of plasma from normal mice at these times had no inhibitory effect. In the litoral cells the injection of plasma from tumour-bearing mice made 22 h before hepatectomy (16:00 hours/-22 h) led to a stimulation of mitotic activity which was controlled at 14:00 hours/48 h.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Ball Bearings Equipped for In Situ Lubrication on Demand

    Science.gov (United States)

    Marchetti, Mario; Jones, William R., Jr.; Pepper, Stephen V.; Jansen, Mark; Predmore, Roamer

    2005-01-01

    bearing was turned at a rate of 200 RPM. The lubricator control was turned on at the beginning of the test, turned off for about 800 seconds, then turned on again. As shown in Figure 2, the controlled lubricator stabilized the torque in a low range, starting immediately after initial turn-on and immediately after resumption of the lubricator control.

  12. Weight control behaviors in overweight/obese U.S. adults with diagnosed hypertension and diabetes

    Directory of Open Access Journals (Sweden)

    Li Chaoyang

    2009-03-01

    Full Text Available Abstract Background Obesity is a major risk factor for development and progression of hypertension and diabetes, which often coexist in obese patients. Losing weight by means of energy restriction and physical activity has been effective in preventing and managing these diseases. However, weight control behaviors among overweight/obese adults with these conditions are poorly understood. Methods Using self-reported data from 143,386 overweight/obese participants (aged ≥ 18 years in the 2003 Behavioral Risk Factor Surveillance System, we examined the proportion of overweight/obese adults who tried to lose weight and their weight control strategies by hypertension and/or diabetes status. Results Among all participants, 58% of those with hypertension, 60% of those with diabetes, and 72% of those with both diseases tried to lose weight, significantly higher than the 50% of those with neither condition (Bonferroni corrected P Conclusion The proportion of overweight/obese patients with diagnosed hypertension and/or diabetes who attempted to lose weight remains suboptimal and the weight control strategies varied significantly among these patients.

  13. Developmental origins of polycystic ovary syndrome (PCOS), a case control study comparing birth weight in women with PCOS and control group.

    Science.gov (United States)

    Sadrzadeh, Sheda; Painter, Rebecca C; Lambalk, Cornelis B

    2016-10-01

    Evidence from various epidemiological studies and experimental animal studies has linked adverse intrauterine circumstances with health problems in adult life. This field of investigation is known as Developmental Origins of Health and Disease (DOHaD). Studies investigating the relation between developing polycystic ovary syndrome (PCOS) in adulthood and birth weight have yielded inconsistent results: PCOS is described more often in women with low birth weight and high birth weight, while other studies have failed to establish any relation. In this retrospective case-control study, we evaluated whether women diagnosed with PCOS had lower birth weight compared to women with a regular menstrual cycle (controls). Binary logistic regression models were used to analyze the data and correct for known confounders. About 65 women with PCOS and 96 controls were recruited for this purpose. The average birth weight of PCOS women (3357 g) did not differ from the average birth weight of controls (3409 g). Mean age at menarche differed significantly between groups, 13.7  years and 12.8  years (p = 0.006), respectively, for PCOS women and controls. In conclusion, we could not confirm the effect of adverse intrauterine conditions, reflected in birth weight, on developing PCOS.

  14. Controllable Lubrication for Main Engine Bearings Using Mechanical and Piezoelectric Actuators

    DEFF Research Database (Denmark)

    Estupinan, Edgar; Santos, Ilmar

    2012-01-01

    Although mechatronic systems are nowadays implemented in a large number of systems in vehicles, active lubrication systems are still incipient in industrial applications. This study is an attempt to extend the active lubrication concept to combustion engines and gives a theoretical contribution...... equations. The global system is numerically solved using as a case study a single-cylinder combustion engine, where the conventional lubrication of the main bearing is modified by applying radial oil injection using piezo-actuated injection. The performance of such a hybrid bearing is compared...

  15. A Technology-Mediated Behavioral Weight Gain Prevention Intervention for College Students: Controlled, Quasi-Experimental Study.

    Science.gov (United States)

    West, Delia Smith; Monroe, Courtney M; Turner-McGrievy, Gabrielle; Sundstrom, Beth; Larsen, Chelsea; Magradey, Karen; Wilcox, Sara; Brandt, Heather M

    2016-06-13

    Both men and women are vulnerable to weight gain during the college years, and this phenomenon is linked to an increased risk of several chronic diseases and mortality. Technology represents an attractive medium for the delivery of weight control interventions focused on college students, given its reach and appeal among this population. However, few technology-mediated weight gain prevention interventions have been evaluated for college students. This study examined a new technology-based, social media-facilitated weight gain prevention intervention for college students. Undergraduates (n =58) in two sections of a public university course were allocated to either a behavioral weight gain prevention intervention (Healthy Weight, HW; N=29) or a human papillomavirus (HPV) vaccination awareness intervention (control; N=29). All students were enrolled, regardless of initial body weight or expressed interest in weight management. The interventions delivered 8 lessons via electronic newsletters and Facebook postings over 9 weeks, which were designed to foster social support and introduce relevant educational content. The HW intervention targeted behavioral strategies to prevent weight gain and provided participants with a Wi-Fi-enabled scale and an electronic physical activity tracker to facilitate weight regulation. A repeated-measures analysis of variance was conducted to examine within- and between-group differences in measures of self-reported weight control practices and objectively measured weight. Use of each intervention medium and device was objectively tracked, and intervention satisfaction measures were obtained. Students remained weight stable (HW: -0.48+1.9 kg; control: -0.45+1.4 kg), with no significant difference between groups over 9 weeks (P =.94). However, HW students reported a significantly greater increase in the number of appropriate weight control strategies than did controls (2.1+4.5 vs -1.1+3.4, respectively; P =.003) and there was no increase in

  16. A Review of Weight Control Strategies and Their Effects on the Regulation of Hormonal Balance

    Directory of Open Access Journals (Sweden)

    Neil A. Schwarz

    2011-01-01

    Full Text Available The estimated prevalence of obesity in the USA is 72.5 million adults with costs attributed to obesity more than 147 billion dollars per year. Though caloric restriction has been used extensively in weight control studies, short-term success has been difficult to achieve, with long-term success of weight control being even more elusive. Therefore, novel approaches are needed to control the rates of obesity that are occurring globally. The purpose of this paper is to provide a synopsis of how exercise, sleep, psychological stress, and meal frequency and composition affect levels of ghrelin, cortisol, insulin GLP-1, and leptin and weight control. We will provide information regarding how hormones respond to various lifestyle factors which may affect appetite control, hunger, satiety, and weight control.

  17. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  18. Effects of weight-bearing exercise on a mini-trampoline on foot mobility, plantar pressure and sensation of diabetic neuropathic feet; a preliminary study.

    Science.gov (United States)

    Kanchanasamut, Wararom; Pensri, Praneet

    2017-01-01

    Objective : Foot and ankle exercise has been advocated as a preventative approach in reducing the risk of foot ulceration. However, knowledge about the appropriate types and intensity of exercise program for diabetic foot ulcer prevention is still limited. The current study aimed to examine the effects of an eight-week mini-trampoline exercise on improving foot mobility, plantar pressure and sensation of diabetic neuropathic feet. Methods : Twenty-one people with diabetic peripheral neuropathy who had impaired sensation perception were divided into two groups. The exercise group received a foot-care education program plus an eight-week home exercise program using the mini-trampoline ( n  = 11); whereas a control group received a foot-care education only ( n  = 10). Measurements were undertaken at the beginning, at the completion of the eight-week program and at a 20-week follow-up. Results : Both groups were similar prior to the study. Subjects in the exercise group significantly increased the range of the first metatarsophalangeal joint in flexion (left: p  = 0.040, right: p  = 0.012) and extension (left: p  = 0.013) of both feet more than controlled subjects. There was a trend for peak plantar pressure at the medial forefoot to decrease in the exercise group ( p  = 0.016), but not in the control group. At week 20, the number of subjects in the exercise group who improved their vibration perception in their feet notably increased when compared to the control group (left: p  = 0.043; right: p  = 0.004). Conclusions : This is a preliminary study to document the improvements in foot mobility, plantar pressure and sensation following weight-bearing exercise on a flexible surface in people with diabetic neuropathic feet. Mini-trampoline exercise may be used as an adjunct to other interventions to reduce risk of foot ulceration. A larger sample size is needed to verify these findings. This trial is registered with COA No. 097.2/55.

  19. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  20. High Capacity cylinder roller bearing; High Capacity Zylinderrollenlager. Ein vollrolliges Lager mit Kaefig

    Energy Technology Data Exchange (ETDEWEB)

    Reichert, J.; Baum, J. [SKF, Schweinfurt (Germany)

    2007-07-15

    The high capacity cylinder roller bearing is an example for continuous development of SKF products and does an effective contribution to increase operational safety and offers the possibility to reduce weight and compact design. (GL)

  1. Does the incorporation of portion-control strategies in a behavioral program improve weight loss in a 1-year randomized controlled trial?

    Science.gov (United States)

    Rolls, B J; Roe, L S; James, B L; Sanchez, C E

    2017-03-01

    Controlling food portion sizes can help reduce energy intake, but the effect of different portion-control methods on weight management is not known. In a 1-year randomized trial, we tested whether the efficacy of a behavioral weight-loss program was improved by incorporating either of the two portion-control strategies instead of standard advice about eating less. The Portion-Control Strategies Trial included 186 women with obesity (81%) or overweight (19%). Participants were randomly assigned to one of three equally intensive behavioral programs, consisting of 19 individual sessions over 12 months. The Standard Advice Group was instructed to eat less food while making healthy choices, the Portion Selection Group was instructed to choose portions based on the energy density using tools such as food scales and the Pre-portioned Foods Group was instructed to structure meals around pre-portioned foods such as single-serving main dishes, for which some vouchers were provided. In an intention-to-treat analysis, a mixed-effects model compared weight loss trajectories across 23 measurements; at month 12, weight was measured for 151 participants (81%). The trajectories showed that the Pre-portioned Foods Group initially lost weight at a greater rate than the other two groups (P=0.021), but subsequently regained weight at a greater rate (P=0.0005). As a result, weight loss did not differ significantly across groups at month 6 (mean±s.e. 5.2±0.4 kg) or month 12 (4.5±0.5 kg). After 1 year, measured weight loss averaged 6% of baseline weight. The frequency of using portion-control strategies initially differed across groups, then declined over time and converged at months 6 and 12. Incorporating instruction on portion-control strategies within a 1-year behavioral program did not lead to a greater weight loss than standard advice. Using pre-portioned foods enhanced early weight loss, but this was not sustained over time. Long-term maintenance of behavioral strategies to

  2. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics.

    Science.gov (United States)

    Tse, Peter W; Wang, Dong

    2017-02-14

    Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL). Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI) so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  3. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  4. An Immune-Modulating Diet in Combination with Chemotherapy Prevents Cancer Cachexia by Attenuating Systemic Inflammation in Colon 26 Tumor-Bearing Mice.

    Science.gov (United States)

    Nakamura, Kentaro; Sasayama, Akina; Takahashi, Takeshi; Yamaji, Taketo

    2015-01-01

    Cancer cachexia is characterized by muscle wasting caused partly by systemic inflammation. We previously demonstrated an immune-modulating diet (IMD), an enteral diet enriched with immunonutrition and whey-hydrolyzed peptides, to have antiinflammatory effects in some experimental models. Here, we investigated whether the IMD in combination with chemotherapy could prevent cancer cachexia in colon 26 tumor-bearing mice. Forty tumor-bearing mice were randomized into 5 groups: tumor-bearing control (TB), low dose 5-fluorouracil (5-FU) and standard diet (LF/ST), low dose 5-FU and IMD (LF/IMD), high dose 5-FU and standard diet (HF/ST) and high dose 5-FU and IMD (HF/IMD). The ST and IMD mice received a standard diet or the IMD ad libitum for 21 days. Muscle mass in the IMD mice was significantly higher than that in the ST mice. The LF/IMD in addition to the HF/ST and HF/IMD mice preserved their body and carcass weights. Plasma prostaglandin E2 levels were significantly lower in the IMD mice than in the ST mice. A combined effect was also observed in plasma interleukin-6, glucose, and vascular endothelial growth factor levels. Tumor weight was not affected by different diets. In conclusion, the IMD in combination with chemotherapy prevented cancer cachexia without suppressing chemotherapeutic efficacy.

  5. Low/No Calorie Sweetened Beverage Consumption in the National Weight Control Registry

    Science.gov (United States)

    Catenacci, Victoria A.; Pan, Zhaoxing; Thomas, J. Graham; Ogden, Lorraine G.; Roberts, Susan A.; Wyatt, Holly R.; Wing, Rena R.; Hill, James O.

    2015-01-01

    Objective The aim of this cross-sectional study was to evaluate prevalence of and strategies behind low/no calorie sweetened beverage (LNCSB) consumption in successful weight loss maintainers. Methods An online survey was administered to 434 members of the National Weight Control Registry (NWCR, individuals who have lost ≥13.6 kg and maintained weight loss for > 1 year). Results While few participants (10%) consume sugar-sweetened beverages on a regular basis, 53% regularly consume LNCSB. The top five reasons for choosing LNCSB were for taste (54%), to satisfy thirst (40%), part of routine (27%), to reduce calories (22%) and to go with meals (21%). The majority who consume LNCSB (78%) felt they helped control total calorie intake. Many participants considered changing patterns of beverage consumption to be very important in weight loss (42%) and maintenance (40%). Increasing water was by far the most common strategy, followed by reducing regular calorie beverages. Conclusions Regular consumption of LNCSB is common in successful weight loss maintainers for various reasons including helping individuals to limit total energy intake. Changing beverage consumption patterns was felt to be very important for weight loss and maintenance by a substantial percentage of successful weight loss maintainers in the NWCR. PMID:25044563

  6. Comparison of Alignment Correction Angles Between Fixed-Bearing and Mobile-Bearing UKA.

    Science.gov (United States)

    Inoue, Atsuo; Arai, Yuji; Nakagawa, Shuji; Inoue, Hiroaki; Yamazoe, Shoichi; Kubo, Toshikazu

    2016-01-01

    Good outcomes have been reported with both fixed-bearing and mobile-bearing unicompartmental knee arthroplasty (UKA). However, overcorrected alignment could induce the progression of arthritis on the non-arthroplasty side. Changes of limb alignment after UKA with both types of bearings (fixed bearing: 24 knees, mobile bearing: 28 knees) were investigated. The mean difference between the preoperative standing femoral-tibial angle (FTA) and postoperative standing FTA was significantly larger in mobile bearing UKA group. In fixed-bearing UKA, there must be some laxity in MCL tension so that a 2-mm tension gauge can be inserted. In mobile-bearing UKA, appropriate MCL tension is needed to prevent bearing dislocation. This difference in MCL tension may have caused the difference in the correction angle between the groups. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Single axis controlled hybrid magnetic bearing for left ventricular assist device: hybrid core and closed magnetic circuit.

    Science.gov (United States)

    da Silva, Isaias; Horikawa, Oswaldo; Cardoso, Jose R; Camargo, Fernando A; Andrade, Aron J P; Bock, Eduardo G P

    2011-05-01

    In previous studies, we presented main strategies for suspending the rotor of a mixed-flow type (centrifugal and axial) ventricular assist device (VAD), originally presented by the Institute Dante Pazzanese of Cardiology (IDPC), Brazil. Magnetic suspension is achieved by the use of a magnetic bearing architecture in which the active control is executed in only one degree of freedom, in the axial direction of the rotor. Remaining degrees of freedom, excepting the rotation, are restricted only by the attraction force between pairs of permanent magnets. This study is part of a joint project in development by IDPC and Escola Politecnica of São Paulo University, Brazil. This article shows advances in that project, presenting two promising solutions for magnetic bearings. One solution uses hybrid cores as electromagnetic actuators, that is, cores that combine iron and permanent magnets. The other solution uses actuators, also of hybrid type, but with the magnetic circuit closed by an iron core. After preliminary analysis, a pump prototype has been developed for each solution and has been tested. For each prototype, a brushless DC motor has been developed as the rotor driver. Each solution was evaluated by in vitro experiments and guidelines are extracted for future improvements. Tests have shown good results and demonstrated that one solution is not isolated from the other. One complements the other for the development of a single-axis-controlled, hybrid-type magnetic bearing for a mixed-flow type VAD. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

  8. High Specific Stiffness Shafts and Advanced Bearing Coatings for Gas Turbine Engines Final Report CRADA No. TC-1089-95

    Energy Technology Data Exchange (ETDEWEB)

    Barbee, Troy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chin, Herbert [United Technologies Corporation, East Hartford, CT (United States)

    2017-11-09

    At the time of the CRADA, the largest in-service gas-turbine aircraft engines strove for increased thrust and power density to meet the requirements for take-off thrust, given the increase in take-off gross weight (TOGW) associated with longer range transport requirements. The trend in modem turbo shaft engines was toward turbine shafts with higher and higher length-to-diameter ratios, which reduced the shaft critical speed. Using co nventional shaft materials, this lead to shafts that needed to operate near or above sensitive shaft bending critical speeds, therefore requiring multiple bearings and/ or multiple squeeze-film dampers to control the dynamic response. Using new materials and d esign concepts this project demonstrated the use of new shaft materials which could provide increased shaft speed range above existing maximum engine speeds without encountering a critic al speed event and high vector deflections. This increased main shaft speed also resulted in decreased bearing life associated with lower heat dissipation and higher centrifugal forces. Thus, a limited effort was devoted to feasibility of higher performance bearing coatings to mitigate the speed effects.

  9. A work-site weight control program using financial incentives collected through payroll deduction.

    Science.gov (United States)

    Forster, J L; Jeffery, R W; Sullivan, S; Snell, M K

    1985-11-01

    In a work-site weight control program using a self-motivational program of financial incentives implemented through payroll deduction, 131 university employees chose weight loss goals (0 to 60 lb) and incentives (+5 to +30) to be deducted from each paycheck for six months. Return of incentive money was contingent on progress toward weight goals. Participants were assigned randomly to one of four protocols, involving group educational sessions v self-instruction only and required v optional attendance at weigh-ins and sessions. Overall, dropout rates (21.4%) and mean weight loss (12.2 lb) were encouraging, especially compared with those of other work-site programs. Weight loss was positively associated with attendance at weigh-ins and educational sessions. However, requiring attendance did not increase program effectiveness and seemed also to discourage enrollment among men. The weight control program was equally effective when offered with professionally led educational sessions or when accompanied by self-instructional materials only.

  10. Cigarette weight control systems

    International Nuclear Information System (INIS)

    Powell, G.F.W.; Bolt, R.C.; Simmons, A.

    1980-01-01

    A system is described for monitoring the weight of a continuous wrapped rod of tobacco formed by a cigarette-making machine. A scanner unit can be used which passes beta-rays from a primary radiation source through the rod. The absorption is measured by comparison of the intensity at a detector on the opposite side of the rod with that at a detector facing another smaller source, the balance unit. This is pre-set so that when the rod weight is correct the detected intensities from the two sources will be equal. It is essential that the scanning station is kept clean otherwise the dust is included in the weight reading and the cigarettes manufactured would be underweight. This can be checked using an artificial cigarette of known weight as a calibration check. In this device a test circuit can be connected to the scanner head and this opens the shutter over the radioactive source when the test is initiated. A warning device is initiated if the reading is beyond predetermined limits and can be made to prevent operation of the cigarette machine if a satisfactory test is not obtained. (U.K.)

  11. Development of superconducting magnetic bearing using superconducting coil and bulk superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Seino, H; Nagashima, K; Arai, Y [Railway Technical Research Institute, Hikari-cho 2-8-38, Kokubunji-shi, Tokyo (Japan)], E-mail: seino@rtri.or.jp

    2008-02-01

    The authors conducted a study on superconducting magnetic bearing, which consists of superconducting rotor and stator to apply the flywheel energy-storage system for railways. In this study, high temperature bulk superconductor (HTS bulk) was combined with superconducting coils to increase the load capacity of the bearing. In the first step of the study, the thrust rolling bearing was selected for application by using liquid nitrogen cooled HTS bulk. 60mm-diameter HTS bulks and superconducting coil which generated a high gradient of magnetic field by cusp field were adopted as a rotor and a stator for superconducting magnetic bearing, respectively. The results of the static load test and the rotation test, creep of the electromagnetic forces caused by static flux penetration and AC loss due to eccentric rotation were decreased to the level without any problems in substantial use by using two HTS bulks. In the result of verification of static load capacity, levitation force (thrust load) of 8900N or more was supportable, and stable static load capacity was obtainable when weight of 460kg was levitated.

  12. Development of superconducting magnetic bearing using superconducting coil and bulk superconductor

    International Nuclear Information System (INIS)

    Seino, H; Nagashima, K; Arai, Y

    2008-01-01

    The authors conducted a study on superconducting magnetic bearing, which consists of superconducting rotor and stator to apply the flywheel energy-storage system for railways. In this study, high temperature bulk superconductor (HTS bulk) was combined with superconducting coils to increase the load capacity of the bearing. In the first step of the study, the thrust rolling bearing was selected for application by using liquid nitrogen cooled HTS bulk. 60mm-diameter HTS bulks and superconducting coil which generated a high gradient of magnetic field by cusp field were adopted as a rotor and a stator for superconducting magnetic bearing, respectively. The results of the static load test and the rotation test, creep of the electromagnetic forces caused by static flux penetration and AC loss due to eccentric rotation were decreased to the level without any problems in substantial use by using two HTS bulks. In the result of verification of static load capacity, levitation force (thrust load) of 8900N or more was supportable, and stable static load capacity was obtainable when weight of 460kg was levitated

  13. Model ZD-I paper base weight measuring and controlling system

    International Nuclear Information System (INIS)

    Li Nianzu; Song Debin; Wu Guoliang; Hou Yaoxin; Li Dazhen

    1988-01-01

    Model ZD-I Base Weight Measuring and Controlling System has been developed for the automation process in paper-making industry. A single-board microprocessor is installed in the system. The mass thickness can be controlled within 1 g/m 2 if the changing range of concentration and water content is less than 10%

  14. The Biotribology of PEEK-on-HXLPE Bearings Is Comparable to Traditional Bearings on a Multidirectional Pin-on-disk Tester.

    Science.gov (United States)

    Baykal, Doruk; Siskey, Ryan S; Underwood, Richard J; Briscoe, Adam; Kurtz, Steven M

    2016-11-01

    All-polymer bearings involving polyetheretherketone (PEEK) have been proposed for orthopaedic applications because they may reduce stress shielding, reduce weight of the implants, reduce wear and risk of osteolysis, and prevent release of metal ions by replacing the metal articulating components. Little is known about the biotribology of all-polymer PEEK bearings, including the effects of cross-shear, which are relevant for implant longevity, especially in the hip, and increased temperature that may affect lubricant proteins and, hence, lubrication in the joint. Using pin-on-disk in vitro testing, we asked: (1) Can all-polymer bearing couples involving PEEK have a comparable or lower wear rate than highly crosslinked UHMWPE (HXLPE) on CoCr bearing couples? (2) Is the wear rate of PEEK bearing couples affected by the amount of cross-shear? (3) Is there a difference in wear mechanism and surface morphology for all-polymer bearing surfaces compared with UHMWPE (HXLPE) on CoCr? We simultaneously tested a total of 100 pin-on-disk couples (n = 10 per bearing couple) consisting of three traditional metal-on-UHMWPE and seven polymer-on-polymer bearings for 2 million cycles under physiologically relevant conditions and in accordance with ASTM F732. Using analysis of variance, we analyzed the effect of bearing surface topography and cross-shear on wear rate. The changes in surface topography were evaluated using optical microscopy. Sample size was sufficient to provide 80% power to detect a difference of 1.4 mm 3 /MC in average wear rates of bearing couples. The combined wear rates of all-polymer bearing couples were not different than traditional bearing couples. With the numbers available, the PEEK and HXLPE bearing couple had a mean wear rate (WR: mean ± SD) of 0.9 ± 1.1 mm 3 /MC (95% confidence interval [CI], 0.2-1.5 mm 3 /MC), which was not different than the wear rate of the CoCr and HXLPE bearing couple (1.6 ± 2.0 mm 3 /MC; 95% CI, 0.4-2.8 mm 3 /MC; mean difference

  15. Dynamic Characteristics of Rotors on Passive and Active Thrust Fluid-film Bearings with Fixed Pads

    Directory of Open Access Journals (Sweden)

    Babin Alexander

    2018-01-01

    Full Text Available Application of fluid-film bearings in rotor machines in many cases could have no alternative due to obvious advantages when compared to roller element bearings. Integration of information technology in mechanical engineering resulting in emergence of a new field of research – mechatronic bearings which allowed tracking condition of the most important parts of a machine and adjusting operational parameters of the system. Application of servo valves to control the flow rate through a fluid-film bearing is the most universal and simple way of rotor’s position control due to relative simplicity of modelling and absence of need to radically change the design of conventional hydrodynamic bearings. In the present paper numerical simulations of passive (conventional as opposed to mechatronic and active hybrid thrust fluid-film bearings with a central feeding chamber are presented, that are parts of a mechatronic rotor-bearing node. Numerical model of an active thrust bearing is based on solution of equations of hydrodynamics, rotor dynamics and an additional model of a servo valve. Various types of control have been investigated: P, PI and PID control, and the dynamic behaviour of a system has been estimated under various loads, namely static, periodic and impulse. A design of a test rig has been proposed to study passive and active thrust fluid-film bearings aimed at, among other, validation of numerical results of active bearings simulation.

  16. Portion controlled ready-to-eat meal replacement is associated with short term weight loss: a randomised controlled trial.

    Science.gov (United States)

    Kuriyan, Rebecca; Lokesh, Deepa P; D'Souza, Ninoshka; Priscilla, Divya J; Peris, Chandni Halcyon; Selvam, Sumithra; Kurpad, Anura V

    2017-01-01

    Strategies to prevent and treat overweight/obesity are urgently needed. This study assessed the effect of a short-term intake of ready-to-eat cereal on body weight and waist circumference of overweight/obese individuals in comparison to a control group. A randomized, controlled 2-arm trial was carried out on 101 overweight/obese (Body Mass Index - 29.2±2.4 kg/m2) females aged 18 to 44 years, at St. John's Medical College Hospital. The intervention group received a low fat, ready to eat cereal, replacing two meals/day for two weeks. The control group was provided with standard dietary guidelines for weight loss and energy requirements for both groups were calculated similarly. Anthropometric, dietary, appetite and health status assessments were carried out at baseline and at the end of two weeks. At the end of two weeks, the mean reductions in body weight and waist circumference were significantly greater in the intervention group, -0.53 kg; 95% CI (-0.86 to -0.19) for body weight and -1.39 cm; 95% CI (-1.78, -0.99) for waist circumference. The intervention group had a significantly higher increase in dietary intakes of certain vitamins, fiber and sugar, and significantly higher reductions in total and polyunsaturated fats and sodium intakes, as compared to the control group (peat cereal could be effective for short-term weight loss, with some improvements in the nutrient intake profile. However, studies of longer duration are needed.

  17. A review of bear farming and bear trade in Lao People's Democratic Republic

    Directory of Open Access Journals (Sweden)

    E. Livingstone

    2018-01-01

    Full Text Available This study reviews the bear farming industry in Lao PDR with the objective of documenting the current number of commercial bear facilities (i.e. captive bear facilities judged to be trading in bear bile and/or bears and bear parts and the number of bears contained within these facilities, noting changes since it was last examined between 2000 and 2012 by Livingstone and Shepherd (2014. We surveyed all known commercial bear facilities and searched for previously unrecorded facilities. We compared our records with Livingstone and Shepherd (2014 and corrected some duplicate records from their study. In 2017, we recorded seven commercial facilities; four dedicated bear farms, and three tiger farms that were reportedly also keeping bears. We found that between 2012 and 2017 the recorded number of dedicated bear farms reduced by two, and the recorded number of tiger farms also keeping bears increased by one. Within the same period, the total number of captive bears among all facilities in Lao PDR hardly changed (+one, but the number of bears within each facility did. The northern facilities, owned by ethnic Chinese, have expanded since 2012, and central and southern facilities have downsized or closed. While bear farming appears to be downsizing in Lao PDR overall, efforts to phase it out are undermined by the expansion of foreign owned facilities in the north, within Special and Specific Economic Zones that largely cater to a Chinese market, and where the Lao government's efforts to enforce laws and protect wildlife appear to be lacking. Closing the facilities in the north will require political will and decisive law enforcement. Keywords: Bear farms, Bear bile, Gall bladder, Urso-deoxycholic acid, Bear bile extraction facilities, Lao PDR, Ursus thibetanus

  18. Glycogen supercompensation in rat soleus muscle during recovery from nonweight bearing

    Science.gov (United States)

    Henriksen, Erik J.; Kirby, Christopher R.; Tischler, Marc E.

    1989-01-01

    Events leading to the normalization of the glycogen metabolism in the soleus muscle of rat, altered by 72-h three days of hind-limb suspension, were investigated during the 72-h recovery period when the animals were allowed to bear weight on all four limbs. Relative importance of the factors affecting glycogen metabolism in skeletal muscle during the recovery period was also examined. Glycogen concentration was found to decrease within 15 min and up to 2 h of recovery, while muscle glucose 6-phosphate, and the fractional activities of glycogen phosphorylase and glycogen synthase increased. From 2 to 4 h, when the glycogen synthase activity remained elevated and the phosphorylase activity declined, glycogen concentration increased, until it reached maximum values at about 24 h, after which it started to decrease, reaching control values by 72 h. At 12 and 24 h, the inverse relationship between glycogen concentration and the synthase activity ratio was lost, indicating that the reloading transiently uncoupled glycogen control of this enzyme.

  19. [The effect of verticalization of the resulting force (R) of weight bearing in the hip joint on morphologic characteristics of the medullary canal in the femoral shaft in patients with coxarthrosis].

    Science.gov (United States)

    Jovanović, S

    1992-01-01

    An influence of verticalization of the resulting force of weight-bearing on the hip joint "R" on the morphological characteristics of the medullar canal on the proximal edge of the shaft of femur was researched. Progressive degenerative changes of the hip joint with a consequent sideways limping or changes of the collodiaphysial angle (ccd angle) were the cause of the verticalization of the resulting force "R". The analysis of patients treated and operated on The Orthopaedic Department of the General Hospital Osijek and The Orthopaedic Clinic of The Medical Faculty of The University of Zagreb. The research, undoubtedly, proved that the patients with coxarthrosis and side-ways in the hip or with changed collodiaphysial angle experienced verticalization of the resulting force of weigh-bearing of the hip joint and the proximal edge of femur which caused morphological changes of the medular canal of the shaft of femur.

  20. Consumption choice by bears feeding on salmon.

    Science.gov (United States)

    Gende, S M; Quinn, T P; Willson, M F

    2001-05-01

    Consumption choice by brown (Ursus arctos) and black bears (U. americanus) feeding on salmon was recorded for over 20,000 bear-killed fish from 1994 to 1999 in Bristol Bay (sockeye salmon, Oncorhynchus nerka) and southeastern Alaska (pink, O. gorbuscha and chum salmon O. keta). These data revealed striking patterns of partial and selective consumption that varied with relative availability and attributes of the fish. As the availability of salmon decreased, bears consumed a larger proportion of each fish among both years and habitats. When availability was high (absolute number and density of salmon), bears consumed less biomass per captured fish, targeting energy-rich fish (those that had not spawned) or energy-rich body parts (eggs in females; brain in males). In contrast, individual fish were consumed to a much greater extent, regardless of sex or spawning status, in habitats or years of low salmon availability. The proportion of biomass consumed per fish was similar for males and females, when spawning status was statistically controlled, but bears targeted different body parts: the body flesh, brain and dorsal hump in males and the roe in females. Bears thus appeared to maximize energy intake by modifying the amount and body parts consumed, based on availability and attributes of spawning salmon.

  1. Targeting Faulty Bearings for an Ocean Turbine Dynamometer

    Directory of Open Access Journals (Sweden)

    David J. Vendittis

    2013-01-01

    Full Text Available A real-time, vibrations-based condition monitoring method used to detect, localize, and identify a faulty bearing in an ocean turbine electric motor is presented in this paper. The electric motor is installed in a dynamometer emulating the functions of the actual ocean turbine. High frequency modal analysis and power trending are combined to assess the operational health of the dynamometer’s bearings across an array of accelerometers. Once a defect has been detected, envelope analysis is used to identify the exact bearing containing the defect. After a brief background on bearing fault detection, this paper introduces a simplified mathematical model of the bearing fault, followed with the signal processing approach used to detect, locate, and identify the fault. In the results section, effectiveness of the methods of bearing fault detection presented in this paper is demonstrated through processing data collected, first, from a controlled lathe setup and, second, from the dynamometer. By mounting a bearing containing a defect punched into its inner raceway to a lathe and placing an array of accelerometers along the length of lathe, the bearing fault is clearly detected, localized, and identified as an inner raceway defect. Through retroactively trending the data leading to the near-failure of one of the electric motors in the dynamometer, the authors identified a positive trend in energy levels for a specific frequency band present across the array of accelerometers and identify two bearings as possible sources of the fault.

  2. Contrafreeloading in grizzly bears: implications for captive foraging enrichment.

    Science.gov (United States)

    McGowan, Ragen T S; Robbins, Charles T; Alldredge, J Richard; Newberry, Ruth C

    2010-01-01

    Although traditional feeding regimens for captive animals were focused on meeting physiological needs to assure good health, more recently emphasis has also been placed on non-nutritive aspects of feeding. The provision of foraging materials to diversify feeding behavior is a common practice in zoos but selective consumption of foraging enrichment items over more balanced "chow" diets could lead to nutrient imbalance. One alternative is to provide balanced diets in a contrafreeloading paradigm. Contrafreeloading occurs when animals choose resources that require effort to exploit when identical resources are freely available. To investigate contrafreeloading and its potential as a theoretical foundation for foraging enrichment, we conducted two experiments with captive grizzly bears (Ursus arctos horribilis). In Experiment 1, bears were presented with five foraging choices simultaneously: apples, apples in ice, salmon, salmon in ice, and plain ice under two levels of food restriction. Two measures of contrafreeloading were considered: weight of earned food consumed and time spent working for earned food. More free than earned food was eaten, with only two bears consuming food extracted from ice, but all bears spent more time manipulating ice containing salmon or apples than plain ice regardless of level of food restriction. In Experiment 2, food-restricted bears were presented with three foraging choices simultaneously: apples, apples inside a box, and an empty box. Although they ate more free than earned food, five bears consumed food from boxes and all spent more time manipulating boxes containing apples than empty boxes. Our findings support the provision of contrafreeloading opportunities as a foraging enrichment strategy for captive wildlife. (c) 2009 Wiley-Liss, Inc.

  3. Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

    Science.gov (United States)

    Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

    2014-01-01

    We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears.

  4. Water-bearing explosives thickened with a partially hydrolyzed acrylamide polymer

    Energy Technology Data Exchange (ETDEWEB)

    Lyerly, W.M.

    1971-11-23

    Thickened water-bearing explosives are provided which do not segregate and are water-resistant over a wide range of viscosities. Preferred compositions have a unique combination of pourability and fluidity coupled with resistance to water and segregation which makes them particularly suitable in small diameter holes and in holes partially filled with water. Accordingly, water-bearing explosive compositions also are provided which consist of inorganic oxidizing salt, fuel, and water, which improvement consists of thickening the compositions with the combination of polyacrylamide and cross-linked galactomannan. The weight ratio of the polyacrylamide to galactomanan is from about ratio 0.1:1 to 10:1, and preferably 1:1 to 5:1. (1 claim)

  5. Shaking table test of a base isolated model in main control room of nuclear power plant using LRB (lead rubber bearing)

    International Nuclear Information System (INIS)

    Ham, K. W.; Lee, K. J.; Suh, Y. P.

    2005-01-01

    LRB(Lead Rubber Bearing) is a widely used isolation system which is installed between equipment and foundation to reduce seismic vibration from ground. LRB is consist of bearings which are resistant to lateral motion and torsion and has a high vertical stiffness. For that reason, several studies are conducted to apply LRB to the nuclear power plant. In this study, we designed two types of main control floor systems (type I, type II) and a number of shaking table tests with and without isolation system were conducted to evaluate floor isolation effectiveness of LRB

  6. Accuracy of body image perception and preferred weight loss strategies in schizophrenia: a controlled pilot study.

    Science.gov (United States)

    Loh, C; Meyer, J M; Leckband, S G

    2008-02-01

    Obesity in severely mentally ill (SMI) populations is an increasing problem, but there is no controlled data regarding the relationship between SMI and weight perception. Fifty patients with schizophrenia and 50 demographically matched control participants were recruited. Weight, height, and body image accuracy were assessed for all participants, and assessments of mood, psychotic symptom severity and anxiety, and preferred modes of weight loss were assessed for the schizophrenia sample. Patients with schizophrenia were significantly more likely to be obese than controls (46% vs. 18%, P < 0.005), and most patients expressed an interest in losing weight. Obese participants with schizophrenia underestimated their body size (11.0%) more than controls (4.9%) (P < 0.05). Patients with schizophrenia are more likely to underestimate their body size, independent of the effects of obesity. However, they also express concern about weight issues and willingness to participate in psychoeducational groups targeted at weight loss.

  7. Detection of generator bearing inner race creep by means of vibration and temperature analysis

    DEFF Research Database (Denmark)

    Skrimpas, Georgios Alexandros; Dragiev, Ivaylo G.; Hilmisson, Reynir

    2015-01-01

    Vibration and temperature analysis are the two dominating condition monitoring techniques applied to fault detection of bearing failures in wind turbine generators. Relative movement between the bearing inner ring and generator axle is one of the most severe failure modes in terms of secondary...... damages and development. Detection of bearing creep can be achieved reliably based on continuous trending of the amplitude of vibration running speed harmonic and temperature absolute values. In order to decrease the number of condition indicators which need to be assessed, it is proposed to exploit...... a weighted average descriptor calculated based on the 3rd up to 6th harmonic orders. Two cases of different bearing creep severity are presented, showing the consistency of the combined vibration and temperature data utilization. In general, vibration monitoring reveals early signs of abnormality several...

  8. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  9. Orthopaedic measurements with computed radiography: Methodological development, accuracy, and radiation dose with special reference to the weight-bearing lower extremity and the dislocating patella

    International Nuclear Information System (INIS)

    Sanfridsson, J.

    2001-01-01

    The overall aim of this study was to develop and evaluate a measurement system for computed radiography and Picture Archiving and Communication Systems, permitting measurements of long distances and angles in and between related images. The developed measurement system, which was based on the QUESTOR Precision Radiography system, was applied to the weight-bearing knee with special reference to the dislocating patella. The QPR system modified for CR fulfilled the criteria for measuring the weight-bearing knee. The special measuring assistance tools that were developed were important for the implementation of CR and PACS, particularly in workstations programmed for musculoskeletal radiology. The energy imparted to the patient was reduced by 98% at the lowest exposure of the CR-system, compared with our conventional analogue method, without loss of diagnostic accuracy. The CR technique creates a possibility, to an extent not previously feasible, to differentiate the exposure parameters (and thus minimise the radiation dose to the patient) by carefully considering the purpose of the examination. A radiographic method for measuring the rotation of the femur and the tibia, and the patellar translation was developed and applied to healthy volunteers. The introduced patellar variables have yielded new insights into the complex sequence of motions between the femur, tibia, and patella. The patients with a dislocating patella were subdivided into one 'clean' group of spontaneous dislocations and one group with various traumas in the history, which thus resulted in two groups with distinct radiographic differences. The Q-angle was decreased in knees that had suffered dislocations, and the traditional surgical treatment with a further reduction of the Q-angle must be challenged. The use of clinical measurements of the Q-angle was not an optimal way to evaluate the mechanical alignment in the patellofemoral joint under physiological conditions. In this study, we have proved

  10. Orthopaedic measurements with computed radiography: Methodological development, accuracy, and radiation dose with special reference to the weight-bearing lower extremity and the dislocating patella

    Energy Technology Data Exchange (ETDEWEB)

    Sanfridsson, J. [Univ. Hospital, Lund (Sweden). Dept. of Diagnostic Radiology

    2001-03-01

    The overall aim of this study was to develop and evaluate a measurement system for computed radiography and Picture Archiving and Communication Systems, permitting measurements of long distances and angles in and between related images. The developed measurement system, which was based on the QUESTOR Precision Radiography system, was applied to the weight-bearing knee with special reference to the dislocating patella. The QPR system modified for CR fulfilled the criteria for measuring the weight-bearing knee. The special measuring assistance tools that were developed were important for the implementation of CR and PACS, particularly in workstations programmed for musculoskeletal radiology. The energy imparted to the patient was reduced by 98% at the lowest exposure of the CR-system, compared with our conventional analogue method, without loss of diagnostic accuracy. The CR technique creates a possibility, to an extent not previously feasible, to differentiate the exposure parameters (and thus minimise the radiation dose to the patient) by carefully considering the purpose of the examination. A radiographic method for measuring the rotation of the femur and the tibia, and the patellar translation was developed and applied to healthy volunteers. The introduced patellar variables have yielded new insights into the complex sequence of motions between the femur, tibia, and patella. The patients with a dislocating patella were subdivided into one 'clean' group of spontaneous dislocations and one group with various traumas in the history, which thus resulted in two groups with distinct radiographic differences. The Q-angle was decreased in knees that had suffered dislocations, and the traditional surgical treatment with a further reduction of the Q-angle must be challenged. The use of clinical measurements of the Q-angle was not an optimal way to evaluate the mechanical alignment in the patellofemoral joint under physiological conditions. In this study, we have

  11. A superconducting thrust-bearing system for an energy storage flywheel

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, T.A.; Cansiz, A.; Campbell, A.M. [IRC in Superconductivity, Cambridge (United Kingdom)

    2002-05-01

    We have constructed a bearing system for an energy storage flywheel. This bearing system uses a combination of permanent magnets and superconductors in an arrangement commonly termed as an Evershed bearing. In an Evershed system there are in fact two bearings which act in concert. In our system we have one bearing constructed entirely out of permanent magnets acting in attraction. This system bears the weight of the flywheel (43.6 kg) but would not, on its own, be stable. Stability is provided by a superconducting bearing which is formed by the interaction between the magnetic field of a permanent magnet sited on the rotor and superconductors on the stator. This overall arrangement is stable over a range of levitation heights and has been tested at rotation speeds of up to around 12 Hz (the maximum speed is dictated by the drive system not the bearing system). There is a sharp resonance peaking at between 2 and 3 Hz and spin down tests indicate that the equivalent coefficient of friction is of the order of 10{sup -5}. The rate of change of velocity is, however, not constant so the drag is clearly not solely frictional. The position of the resonance is dictated by the stiffness of the bearing relative to the mass of the flywheel but the amplitude of the resonance is dictated by the variation in magnitude of the magnetic field of the permanent magnets. Large magnets are (at present) fabricated in sections and this leads to a highly inhomogeneous field. The field has been smoothed by using a combination of iron which acts passively and copper which provides magnetic shielding due to the generation of eddy currents and therefore acts as an 'active' component. Calculations based on the spin down tests indicate that the resultant variation in field is of the order of 3% and measurements are being carried out to confirm this. (author)

  12. The effect of limb amputation on standing weight distribution in the remaining three limbs in dogs.

    Science.gov (United States)

    Cole, Grayson Lee; Millis, Darryl

    2017-01-16

    Despite the fact that limb amputation is a commonly performed procedure in veterinary medicine, quantitative data regarding outcomes are lacking. The intention of this study was to evaluate the effect of limb amputation on weight distribution to the remaining three limbs at a stance in dogs. Ten dogs with a prior forelimb amputation and ten dogs with a prior hindlimb amputation; all of which had no history of orthopaedic or neural disease in the remaining three limbs were included in the study. Standing weight bearing was evaluated with a commercial stance analyzer in all dogs. Five valid trials were obtained and a mean percentage of weight bearing was calculated for each remaining limb. The dogs with a previous forelimb amputation, and also those with a previous hindlimb amputation, had the largest mean increase in weight bearing in the contralateral forelimb. In conclusion, proactive monitoring of orthopaedic disease in the contralateral forelimb may be advisable in dogs with a previous limb amputation. In addition, when determining candidacy for a limb amputation, disease of the contralateral forelimb should be thoroughly evaluated.

  13. The link between weight shift asymmetry and gait disturbances in chronic hemiparetic stroke patients

    Directory of Open Access Journals (Sweden)

    Szopa A

    2017-12-01

    Full Text Available Andrzej Szopa,1 Małgorzata Domagalska-Szopa,2 Anetta Lasek-Bal,3 Amadeusz Żak3 1Department of Physiotherapy, 2Department of Medical Rehabilitation, School of Health Sciences in Katowice, 3Department of Neurology, Professor Leszek Giec Upper Silesian Medical Centre, Medical University of Silesia, Katowice, Poland Introduction: While the asymmetry of body posture and the asymmetrical nature of hemiparetic gait in poststroke (PS patients are well documented, the role of weight shift asymmetry in gait disorders after stroke remains unclear. Objective: We examined the association of weight-bearing asymmetry (WBA between paretic and nonparetic lower limbs during quiet standing with the degree of deviation of hemiplegic gait from normal gait evaluated by the Gillette Gait Index (GGI incorporating 16 distinct clinically important kinematic and temporal parameters in chronic PS patients.Participants and methods: Twenty-two ambulatory patients with chronic stroke aged between 50 and 75 years were included in this study. Fourteen patients had hemiparesis on the nondominant side and 8 on the dominant side. The mean time PS was 2 years and 6 months. The reference group consisted of 22 students from the University of the Third Age presenting no neurological disorders. The examination consisted of posturographic weight-bearing (WB distribution and 3-dimensional gait analyses.Results: A significant positive relationship between WBA and GGI was revealed. Moreover, we observed a significant negative association between WBA and paretic step length and walking speed. With regard to kinematic data, the range of motion of knee flexion and peak dorsiflexion in the swing phase of the paretic leg were significantly negatively associated with WBA.Conclusion: Although further research is needed to determine a causal link between postural control asymmetry and gait disturbance in hemiplegics, our findings support the inclusion of WB measurements between paretic and

  14. A new inertia weight control strategy for particle swarm optimization

    Science.gov (United States)

    Zhu, Xianming; Wang, Hongbo

    2018-04-01

    Particle Swarm Optimization is a member of swarm intelligence algorithms, which is inspired by the behavior of bird flocks. The inertia weight, one of the most important parameters of PSO, is crucial for PSO, for it balances the performance of exploration and exploitation of the algorithm. This paper proposes a new inertia weight control strategy and PSO with this new strategy is tested by four benchmark functions. The results shows that the new strategy provides the PSO with better performance.

  15. Bear-ly” learning: Limits of abstraction in black bear cognition

    Directory of Open Access Journals (Sweden)

    Jennifer Vonk

    2018-02-01

    Full Text Available We presented two American black bears (Ursus americanus with a serial list learning memory task, and one of the bears with a matching-to-sample task. After extended training, both bears demonstrated some success with the memory task but failed to generalize the overarching rule of the task to novel stimuli. Matching to sample proved even more difficult for our bear to learn. We conclude that, despite previous success in training bears to respond to natural categories, quantity discriminations, and other related tasks, that bears may possess a cognitive limitation with regards to learning abstract rules. Future tests using different procedures are necessary to determine whether this is a limit of bears’ cognitive capacities, or a limitation of the current tasks as presented. Future tests should present a larger number of varying stimuli. Ideally, bears of various species should be tested on these tasks to demonstrate species as well as individual differences.

  16. Overeating with and without loss of control: Associations with weight status, weight-related characteristics, and psychosocial health.

    Science.gov (United States)

    Goldschmidt, Andrea B; Loth, Katie A; MacLehose, Richard F; Pisetsky, Emily M; Berge, Jerica M; Neumark-Sztainer, Dianne

    2015-12-01

    The relative importance of loss of control and overeating in the relationship between binge eating and eating-related and general psychopathology has been debated in the literature. This study assessed the prevalence and correlates of overeating with and without loss of control within a diverse, population-based sample of adolescents. A highly diverse (81.1% non-White) sample of adolescents (n = 2,793) from EAT-2010 (Eating and Activity in Teens) completed self-report questionnaires assessing eating-related psychopathology, substance use, nonsuicidal self-injury, depressive symptoms, and self-esteem. Overeating without loss of control was reported by 6.9% of girls and 5.0% of boys, while 9.6% of girls and 6.3% of boys reported overeating with loss of control (binge eating). Overall, overeating (with or without loss of control) was positively associated with unhealthy or extreme weight control behaviors, dieting, nonsuicidal self-injury, lower body satisfaction, and self-esteem, and higher depressive symptoms relative to no overeating. Among girls, binge eating was associated with unhealthy or extreme weight control behaviors, lower self-esteem, and higher depressive symptoms relative to overeating without loss of control, while in boys, binge eating was associated with greater cigarette usage, lower body satisfaction, and greater depressive symptoms than overeating without loss of control (although cigarette usage was comparable in boys reporting binge eating and no overeating). Any overeating, with or without loss of control, was associated with multiple adverse correlates among adolescents. Loss of control was uniquely associated with multiple health indicators, further highlighting its importance as a marker of severity of overeating. © 2015 Wiley Periodicals, Inc.

  17. Adolescent exergame play for weight loss and psychosocial improvement: a controlled physical activity intervention.

    Science.gov (United States)

    Staiano, Amanda E; Abraham, Anisha A; Calvert, Sandra L

    2013-03-01

    Overweight and obese youth, who face increased risk of medical complications including heart disease and type II diabetes, can benefit from sustainable physical activity interventions that result in weight loss. This study examined whether a 20-week exergame (i.e., videogame that requires gross motor activity) intervention can produce weight loss and improve psychosocial outcomes for 54 overweight and obese African-American adolescents. Participants were recruited from a public high school and randomly assigned to competitive exergame, cooperative exergame, or control conditions. All exergame participants were encouraged to play the Nintendo Wii Active game for 30-60 min per school day in a lunch-time or after-school program. Cooperative exergame participants worked with a peer to expend calories and earn points together, whereas competitive exergame participants competed against a peer. Control participants continued regular daily activities. Outcome measures included changes in weight, peer support, self-efficacy, and self-esteem, measured at baseline, and at ∼10 and 20 weeks. Growth curve analysis revealed that cooperative exergame players lost significantly more weight (mean = 1.65 kg; s.d. = 4.52) than the control group, which did not lose weight. The competitive exergame players did not differ significantly from the other conditions. Cooperative exergame players also significantly increased in self-efficacy compared to the control group, and both exergame conditions significantly increased in peer support more than the control group. Exergames, especially played cooperatively, can be an effective technological tool for weight loss among youth. Copyright © 2012 The Obesity Society.

  18. GAS BEARING

    Science.gov (United States)

    Skarstrom, C.W.

    1960-09-01

    A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

  19. In vivo distribution of Tc-99m labeled recombinant tissue-type plasminogen activator in control and thrombus-bearing rats

    International Nuclear Information System (INIS)

    Tsukamoto, Eriko

    1992-01-01

    In vivo distribution of Tc-99m labeled recombinant tissue-type plasminogen activator (Tc-99m-rt-PA) was studied in control rats and thrombus-bearing rats. To compare fibrin binding in vivo with that in vitro, Tc-99m-rt-PA binding to fibrin gel in vitro was also imaged. Rapid blood clearance and accumulation into the liver and kidneys were observed in both control and thrombus-bearing rats. Accumulation in the stomach, which indicates instability of labeled rt-PA in vivo, was very low until two hours after injection. Tc-99m-rt-PA accumulation in the clots was higher than that in skeletal and heart muscles, although it was lower than in blood, liver, and kidneys. Administration of aprotinin, an antifibrinolytic agent, significantly prolonged clot accumulation of Tc-99m-rt-PA at 30 minutes after injection. These results suggest that fibrinolysis is responsible for the low rt-PA concentration in the clots. A scintigram of a thrombus-bearing rat demonstrated increased radioactivity at the clot forming site. On the other hand, Tc-99m-labeled human albumin, which was used as a control, was not accumulated in the clot. Tc-99m-rt-PA binding to fibrin gel in vitro was clearly imaged. By comparison, in vivo fibrin binding of Tc-99m-rt-PA was much lower than in vitro. The reasons for low thrombus uptake in vivo may be: (1) biochemical inactivation of extrinsically administered rt-PA by t-PA inhibitor; (2) fibrinolysis by rt-PA activated plasminogen. Overcoming these limitations will enable Tc-99m-rt-PA to reach the stage of clinical trials. (author)

  20. Low energy density diet, weight loss maintenance, and risk of cardiovascular disease following a recent weight reduction program: A randomized control trial

    Directory of Open Access Journals (Sweden)

    Golgis Karimi

    2016-01-01

    Full Text Available Background: Little is known about the effects of a low energy dense diet on weight maintenance and cardiovascular risks following a recent weight reduction. Therefore, we assessed if weight maintenance, lipid profiles, and glycemic control differ between low energy density (LED diet and usual diet consumers following a recent weight reduction. Materials and Methods: In this randomized controlled clinical trial study in a parallel design, we recruited 70 patients with the history of weight reduction in the recent 1 year. LED diet contained 30% fat, 15% protein, and 55% carbohydrate was administered to the test group, and a usual diet including 35% fat, 15% protein, and 50% carbohydrate was prescribed to the control group for 7 months. Dietary intake was assessed by using 3 days food records. Biochemical markers and anthropometric measures were done according to the standard protocol. Results: Weight reduced in LED diet consumers compared to usual diet consumers (−0.3 ± 0.2 vs. 1.3 ± 0.4%, P = 0.002. The results was the same regarding waist circumference (−0.4 ± 0.2 vs. 0.3 ± 0.1%, P = 0.004. Fasting blood sugar also decreased in LED diet group (−9.5 ± 0.8 vs. 0.4 ± 1.0%, P = 0.0001. LED diet group had a drop in percent change of their total cholesterol (−0.4 ± 0.5 vs. 2.05 ± 0.4%, P = 0.04 and low-density lipoprotein-cholesterol (4.8 ± 0.9 vs. −0.3 ± 0.9%, P = 0.002. Conclusion: Our findings confirmed beneficial effects of LED diet on attenuating weight regain in subjects with history of recent weight reduction. It might be derived from higher consumption of fruits, vegetables, and fiber among LED diet than usual diet consumers.

  1. Coefficients of productivity for Yellowstone's grizzly bear habitat

    Science.gov (United States)

    Mattson, David John; Barber, Kim; Maw, Ralene; Renkin, Roy

    2004-01-01

    This report describes methods for calculating coefficients used to depict habitat productivity for grizzly bears in the Yellowstone ecosystem. Calculations based on these coefficients are used in the Yellowstone Grizzly Bear Cumulative Effects Model to map the distribution of habitat productivity and account for the impacts of human facilities. The coefficients of habitat productivity incorporate detailed information that was collected over a 20-year period (1977-96) on the foraging behavior of Yellowstone's bears and include records of what bears were feeding on, when and where they fed, the extent of that feeding activity, and relative measures of the quantity consumed. The coefficients also incorporate information, collected primarily from 1986 to 1992, on the nutrient content of foods that were consumed, their digestibility, characteristic bite sizes, and the energy required to extract and handle each food. Coefficients were calculated for different time periods and different habitat types, specific to different parts of the Yellowstone ecosystem. Stratifications included four seasons of bear activity (spring, estrus, early hyperphagia, late hyperphagia), years when ungulate carrion and whitebark pine seed crops were abundant versus not, areas adjacent to (bear activity in each region, habitat type, and time period were incorporated into calculations, controlling for the effects of proximity to human facilities. The coefficients described in this report and associated estimates of grizzly bear habitat productivity are unique among many efforts to model the conditions of bear habitat because calculations include information on energetics derived from the observed behavior of radio-marked bears.

  2. [State of homeostasis under administration of bear fat in rats with exogenous and endogenous thrombinemia].

    Science.gov (United States)

    Kalashnikova, S P; Solovyov, V G

    2016-01-01

    In experimental studies on 448 rats treated with bear fat diet (0.08 ml/100 g body weight), the nature and mechanisms of influence of this additive on the process of blood coagulation in experimental thromboplastinemia of different origin has been studied. As a result of intravenous injection in the jugular vein of a suspension of thrombin (exog­enous thrombinemia) all clothingsee tests lengthened in the control animals (pbear fat, but the potential of hemostatic cascade and anticoagulation system remained high (judging by the tests PTV, thrombin time and content of antithrombin III). Under endogenous thromboplastinemia caused by combined stress (hypothermia + physi­cal activity) in animals of the control group on the background of the shortening of the APTT (by 24.9%) and PTV (16.8%), RCMP concentration increased by 52% and activity of antithrombin III increased compensatory. There was an increase of platelet count, due to the activated forms. To 3 h signs of hypocoagulation aggravated even more. In animals treated with bear fat, the results of clothing tests did not differ from the original figures, and by 3 h, the majority of the indicators have reached their original values. The increase in platelet count has not been observed.

  3. Skeletal muscles of hibernating brown bears are unusually resistant to effects of denervation.

    Science.gov (United States)

    Lin, David C; Hershey, John D; Mattoon, John S; Robbins, Charles T

    2012-06-15

    Hibernating bears retain most of their skeletal muscle strength despite drastically reduced weight-bearing activity. Regular neural activation of muscles is a potential mechanism by which muscle atrophy could be limited. However, both mechanical loading and neural activity are usually necessary to maintain muscle size. An alternative mechanism is that the signaling pathways related to the regulation of muscle size could be altered so that neither mechanical nor neural inputs are needed for retaining strength. More specifically, we hypothesized that muscles in hibernating bears are resistant to a severe reduction in neural activation. To test this hypothesis, we unilaterally transected the common peroneal nerve, which innervates ankle flexor muscles, in hibernating and summer-active brown bears (Ursus arctos). In hibernating bears, the long digital extensor (LDE) and cranial tibial (CT) musculotendon masses on the denervated side decreased after 11 weeks post-surgery by 18 ± 11 and 25 ± 10%, respectively, compared with those in the intact side. In contrast, decreases in musculotendon masses of summer-active bears after denervation were 61 ± 4 and 58 ± 5% in the LDE and CT, respectively, and significantly different from those of hibernating bears. The decrease due to denervation in summer-active bears was comparable to that occurring in other mammals. Whole-muscle cross-sectional areas (CSAs) measured from ultrasound images and myofiber CSAs measured from biopsies decreased similarly to musculotendon mass. Thus, hibernating bears alter skeletal muscle catabolic pathways regulated by neural activity, and exploration of these pathways may offer potential solutions for disuse atrophy of muscles.

  4. HemoHIM enhances the therapeutic efficacy of ionizing radiation treatment in tumor-bearing mice.

    Science.gov (United States)

    Park, Hae-Ran; Ju, Eun-Jin; Jo, Sung-Kee; Jung, Uhee; Kim, Sung-Ho

    2010-02-01

    Although radiotherapy is commonly used for a variety of cancers, radiotherapy alone does not achieve a satisfactory therapeutic outcome. In this study, we examined the possibility that HemoHIM can enhance the anticancer effects of ionizing radiation (IR) in melanoma-bearing mice. The HemoHIM was prepared by adding the ethanol-insoluble fraction to the total water extract of a mixture of three edible herbs-Angelica Radix, Cnidium Rhizoma, and Paeonia Radix. Anticancer effects of HemoHIM were evaluated in melanoma-bearing mice exposed to IR. IR treatment (5 Gy at 7 days after melanoma cell injection) reduced the weight of the solid tumors, and HemoHIM supplementation with IR enhanced the decreases in tumor weight (P HemoHIM administration also increased the activity of natural killer cells and cytotoxic T cells, although the proportions of these cells in spleen were not different. In addition, HemoHIM administration increased the interleukin-2 and tumor necrosis factor-alpha secretion from lymphocytes stimulated with concanavalin A, which seemed to contribute to the enhanced efficacy of HemoHIM in tumor-bearing mice treated with IR. In conclusion, HemoHIM may be a beneficial supplement during radiotherapy for enhancing the antitumor efficacy.

  5. Experimental study on bearing preload optimum of machine tool spindle

    International Nuclear Information System (INIS)

    Xu Tao; Xu Guanghua; Zhang Qin; Hua Cheng; Zhang Hu; Jiang Kuosheng

    2012-01-01

    An experimental study is conducted to investigate the possibility and the effect of temperature rise and vibration level of bearing by adjusting axial preloads and radial loads in spindle bearing test rig. The shaft of the test rig is driven by a motorized high speed spindle at the range of 0∼20000 rpm. The axial preloads and radial loads on bearings are controlled by using hydraulic pressure which can be adjusted automatically. Temperature rise and radial vibration of test bearings are measured by thermocouples and Polytec portable laser vibrometer PDV100. Experiment shows that the temperature rise of bearings is nonlinear varying with the increase of radial loads, but temperature rise almost increases linearly with the increase of axial preload and rotating speed. In this paper, an alternate axial preload is used for bearings. When the rotating speed passes through the critical speed of the shaft, axial preload of bearings will have a remarkable effect. The low preload could reduce bearing vibration and temperature rise for bearings as well. At the others speed, the high preload could improve the vibration performance of high speed spindle and the bearing temperature was lower than that of the constant pressure preload spindle.

  6. Hindlimb Skeletal Muscle Function and Skeletal Quality and Strength in +/G610C Mice With and Without Weight-Bearing Exercise.

    Science.gov (United States)

    Jeong, Youngjae; Carleton, Stephanie M; Gentry, Bettina A; Yao, Xiaomei; Ferreira, J Andries; Salamango, Daniel J; Weis, MaryAnn; Oestreich, Arin K; Williams, Ashlee M; McCray, Marcus G; Eyre, David R; Brown, Marybeth; Wang, Yong; Phillips, Charlotte L

    2015-10-01

    Osteogenesis imperfecta (OI) is a heterogeneous heritable connective tissue disorder associated with reduced bone mineral density and skeletal fragility. Bone is inherently mechanosensitive, with bone strength being proportional to muscle mass and strength. Physically active healthy children accrue more bone than inactive children. Children with type I OI exhibit decreased exercise capacity and muscle strength compared with healthy peers. It is unknown whether this muscle weakness reflects decreased physical activity or a muscle pathology. In this study, we used heterozygous G610C OI model mice (+/G610C), which model both the genotype and phenotype of a large Amish OI kindred, to evaluate hindlimb muscle function and physical activity levels before evaluating the ability of +/G610C mice to undergo a treadmill exercise regimen. We found +/G610C mice hindlimb muscles do not exhibit compromised muscle function, and their activity levels were not reduced relative to wild-type mice. The +/G610C mice were also able to complete an 8-week treadmill regimen. Biomechanical integrity of control and exercised wild-type and +/G610C femora were analyzed by torsional loading to failure. The greatest skeletal gains in response to exercise were observed in stiffness and the shear modulus of elasticity with alterations in collagen content. Analysis of tibial cortical bone by Raman spectroscopy demonstrated similar crystallinity and mineral/matrix ratios regardless of sex, exercise, and genotype. Together, these findings demonstrate +/G610C OI mice have equivalent muscle function, activity levels, and ability to complete a weight-bearing exercise regimen as wild-type mice. The +/G610C mice exhibited increased femoral stiffness and decreased hydroxyproline with exercise, whereas other biomechanical parameters remain unaffected, suggesting a more rigorous exercise regimen or another exercise modality may be required to improve bone quality of OI mice. © 2015 American Society for Bone

  7. Light weight hollow maxillary complete denture: A case series

    Directory of Open Access Journals (Sweden)

    Laxman Singh Kaira

    2012-01-01

    Full Text Available Retention, stability and support are the basic principles on which the success of a complete denture relies on. The skill lies in applying these principles efficiently in critical situations. Residual ridge resorption occurs at a three times faster rate in mandibular arch than in the maxillary arch. The severely resorbed maxillary and mandibular edentulous arches that are narrow and constricted with increased interarch space provide decreased support, retention and stability. The consequent weight of the processed complete denture only compromises them further. The severely resorbed jaw can have various treatment options. Extreme resorption of the maxillary denture-bearing area may lead to problems with prosthetic rehabilitation. The advantage of a hollow maxillary or mandibular denture is the reduction of excessive weight of acrylic resin, which normally replaces lost alveolar ridge in the interridge space of the denture wearer. This clinical report describes two case reports of edentulous patients with resorbed ridges where a simplified technique of fabricating a light weight hollow maxillary complete denture was used for the preservation of denture bearing areas.

  8. Black bears in Arkansas: Characteristics of a successful translocation

    Science.gov (United States)

    Smith, Kimberly G.; Clark, Joseph D.

    1994-01-01

    In 1958, the Arkansas Game and Fish Commission began translocating black bears (Ursus americanus) from Minnesota to the Interior Highlands (Ozark and Ouachita mountains) of Arkansas where bears had been extirpated early in this century. This project continued for 11 years with little public imput, during which time an estimated 254 bears were released. We estimate there are now >2,500 bears in the Interior Highlands of Arkansas, Missouri, and Oklahoma, making it one of the most successful translocations of a Carnivora. Factors that contributed to the success include use of wild-captured animals, elimination of major factors associated with extirpation, release into prime habitats within the former range, multiple release sites, release of 20–40 animals/year for eight years, and release of mostly males prior to release of mostly females. Studies on two allopatric populations demonstrate that they are now diverging in some demographic characteristics, including litter size, cub survivorship, and adult sex-ratio. Translocation of black bears to the Interior Highlands is successful in terms of numbers of animals, but it will not be truly successful until people accept black bears as part of the regional fauna. To that end, those associated with management and research of bears in Arkansas are now focussing on public education and control of nuisance bears.

  9. Bright Light for Weight Loss: Results of a Controlled Crossover Trial

    Directory of Open Access Journals (Sweden)

    Konstantin V. Danilenko

    2013-02-01

    Full Text Available Objective: To investigate whether bright light treatment can reduce body mass in overweight subjects irrespective of their seasonal (= light dependence. Methods: A crossover, placebo-controlled, randomized clinical trial was performed between November and April in Novosibirsk, Russia (55° N. The trial comprised a 3-week in-home session of morning bright light treatment using a device of light-emitting diodes and a 3-week placebo session by means of a deactivated ion generator, separated by an off-protocol period of at least 23 days. The number of placebo and light sessions was matched with respect to season. Data were obtained from 34 overweight women, aged 20-54 years, 10 were seasonal-dependent according to the Seasonal Pattern Assessment Questionnaire. Weekly measures included body weight, percentage body fat by bioimpedancemetry, and subjective scores (appetite, mood, energy levels. Results: Motivation and expectation towards weight loss were similar for the two intervention sessions. With light, compared to the placebo session, weight did not reduce significantly, but percentage fat, fat mass, and appetite were significantly lower (average fat reduction 0.35 kg. The latter two results remained significant after excluding seasonal-dependent subjects from the analysis. Irrespective of the type of intervention, seasonal-dependent subjects had greater weight and fat mass changes during treatment (decline p 0.036 or between sessions (regain p 0.003. Photoperiod (p = 0.0041, air temperature to a lesser extent (p = 0.012, but not sunshine (p = 0.29 was associated with the weight change (greater weight reduction if the second session was in spring. Conclusion: Morning bright light treatment reduces body fat and appetite in overweight women and may be included in weight control programs.

  10. Claimed effects, outcome variables and methods of measurement for health claims on foods proposed under European Community Regulation 1924/2006 in the area of appetite ratings and weight management.

    Science.gov (United States)

    Martini, Daniela; Biasini, Beatrice; Rossi, Stefano; Zavaroni, Ivana; Bedogni, Giorgio; Musci, Marilena; Pruneti, Carlo; Passeri, Giovanni; Ventura, Marco; Galli, Daniela; Mirandola, Prisco; Vitale, Marco; Dei Cas, Alessandra; Bonadonna, Riccardo C; Del Rio, Daniele

    2018-06-01

    All the requests for authorisation to bear health claims under Articles 13(5) and 14 in the context of appetite ratings and weight management have received a negative opinion by the European Food Safety Authority (EFSA), mainly because of the insufficient substantiation of the claimed effects (CEs). This manuscript results from an investigation aimed to collect, collate and critically analyse the information related to outcome variables (OVs) and methods of measurement (MMs) in the context of appetite ratings and weight management compliant with Regulation 1924/2006. Based on the literature review, the appropriateness of OVs and MMs was evaluated for specific CEs. This work might help EFSA in the development of updated guidance addressed to stakeholders interested in bearing health claims in the area of weight management. Moreover, it could drive the applicants during the design of randomised controlled trials aimed to substantiate such claims.

  11. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

    Science.gov (United States)

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-03-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

  12. Influence of Electric Discharges on Bearings of Electric Machines

    Directory of Open Access Journals (Sweden)

    Karel Chmelik

    2006-01-01

    Full Text Available I the last time many articles were found out discussed about shaft voltage, bearing currents and their influence on lifetime and reliability of electric machines bearings. This is associated with extension of use of static converters for control drives for DC motors feeding in the past and for induction motors feeding from frequency converters in the last time. It is known from our own experiences that not all failures assigned to bearing currents were their real reason and we also know how hardly the mentioned currents can be measured on real machines and how work-intensive and expensive is to detect real reason of the failure on damaged bearing. We will not concern with basics of classical bearing currents in this paper, because they were known and studied in the beginning of the last century but our own investigations will be presented.

  13. EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

    Directory of Open Access Journals (Sweden)

    Jarosław KACZOR

    2014-06-01

    Full Text Available Durability deep groove ball bearings depends on factors (called attributes design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bearings to work three-bearing shafts, including elasticity and resilience three-bearing shafts.

  14. The effect of a motivational intervention on weight loss is moderated by level of baseline controlled motivation

    Directory of Open Access Journals (Sweden)

    Tate Deborah F

    2010-01-01

    Full Text Available Abstract Background Clinic-based behavioral weight loss programs are effective in producing significant weight loss. A one-size-fits-all approach is often taken with these programs. It may be beneficial to tailor programs based on participants' baseline characteristics. Type and level of motivation may be an important factor to consider. Previous research has found that, in general, higher levels of controlled motivation are detrimental to behavior change while higher levels of autonomous motivation improve the likelihood of behavior modification. Methods This study assessed the outcomes of two internet behavioral weight loss interventions and assessed the effect of baseline motivation levels on program success. Eighty females (M (SD age 48.7 (10.6 years; BMI 32.0 (3.7 kg/m2; 91% Caucasian were randomized to one of two groups, a standard group or a motivation-enhanced group. Both received a 16-week internet behavioral weight loss program and attended an initial and a four-week group session. Weight and motivation were measured at baseline, four and 16 weeks. Hierarchical regression analysis was conducted to test for moderation. Results There was significant weight loss at 16-weeks in both groups (p p = 0.57 (standard group 3.4 (3.6 kg; motivation-enhanced group 3.9 (3.4 kg. Further analysis was conducted to examine predictors of weight loss. Baseline controlled motivation level was negatively correlated with weight loss in the entire sample (r = -0.30; p = 0.01. Statistical analysis revealed an interaction between study group assignment and baseline level of controlled motivation. Weight loss was not predicted by baseline level of controlled motivation in the motivation-enhanced group, but was significantly predicted by controlled motivation in the standard group. Baseline autonomous motivation did not predict weight change in either group. Conclusions This research found that, in participants with high levels of baseline controlled motivation

  15. Radioprotection of normal tissues in tumor-bearing mice by troxerutin

    International Nuclear Information System (INIS)

    Maurya, D.K.; Salvi, V.P.; Krishnan Nair, C.K.

    2004-01-01

    The flavanoid derivative troxerutin, used clinically for treating venous disorders, protected biomembranes and cellular DNA against the deleterious effects of γ-radiation. The peroxidation of lipids (measured as thiobarbituric acid-reacting substances, or TBARS) in rat liver microsomal and mitochondrial membranes resulting from γ-irradiation up to doses of 500 Gy in vitro was prevented by 0.2 mM troxerutin. The administration of troxerutin (175 mg/kg body weight) to tumor-bearing mice by intraperitoneal (ip) one hour prior to 4 Gy whole-body γ-irradiation significantly decreased the radiation-induced peroxidation of lipids in tissues such as liver and spleen, but there was no reduction of lipid peroxidation in tumor. The effect of troxerutin in γ-radiation-induced DNA strand breaks in different tissues of tumor-bearing mice was studied by comet assay. The administration of troxerutin to tumor-bearing animals protected cellular DNA against radiation-induced strand breaks. This was evidenced from decreases in comet tail length, tail moment, and percent of DNA in the tails in cells of normal tissues such as blood leukocytes and bone marrow, and these parameters were not altered in cells of fibrosarcoma tumor. The results revealed that troxerutin could preferentially protect normal tissues against radiation-induced damages in tumor-bearing animals. (author)

  16. Application of cool wan flow control weight scale design on belt conveyor

    International Nuclear Information System (INIS)

    Djokorayono, Rony; Junus; Rivai, A; Gunarwan; Indarzah

    2003-01-01

    Control of the coal mass flow on the belt conveyor at coal handling unit PLTU Suralaya has been designed by using weight scale of gamma absorption technique where accuracy for the measurement of weight scale system is 0,5% to 0,1%. The absorption gamma radiation will be measured by scintillation or ion chamber detector

  17. Tilting-Pad Journal Bearings with Active Lubrication Applied as Calibrated Shakers: Theory and Experiment

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; Santos, Ilmar

    2014-01-01

    In recent years, a continuous research effort has transformed the conventional tilting-pad journal bearing into a mechatronic machine element. The addition of electromechanical elements provides the possibility of generating controllable forces over the rotor as a function of a suitable control...... directly into the bearing clearance. The injected flow is controlled by means of a servovalve. The theoretical model includes the dynamics of servovalves and pipelines using a lumped parameter approach, whereas the coupling between the hydraulic system and the bearing oil film is modeled using a modified...

  18. Effect of Ganoderma lucidum (G. lucidum) on the Liver of Mice Bearing Ehrlich Solid Tumor (EST) and Exposed to γ-Radiation

    International Nuclear Information System (INIS)

    Ibrahim, S.I.; El-Kabany, H.

    2013-01-01

    The present study was performed to investigate the antitumor and radio sensitizing efficacy of Ganodarma lucidum (G. lucidum) and to evaluate its potential to improve hepatic dysfunction in Ehrlich solid tumor (EST) bearing mice. G. lucidum (100 mg/Kg body weight) was administered orally to EST bearing mice for 15 days before and 15 days after tumor inoculation. Irradiation was carried out the 8th day of tumor inoculation when the diameter of the tumor reached approximately 10 mm. Mice were exposed to fractionated doses of whole body γ-radiation (3x2Gy) at two days interval to attain a total dose of 6 Gy. Mice were divided into 6 groups (15 mice in each group) as follows: normal control, mice treated with G. lucidum for 30 days, EST bearing mice, EST bearing mice exposed to fractionated doses of γ-radiation (2Gy x 3), EST bearing mice treated with G. lucidum for 15 days before and 15 days after tumor inoculation and EST bearing mice received combined treatment radiation and G. lucidum. Five mice from each group were sacrificed, after 18 hr fasting after the last dose of G. lucidum treatment. Blood was collected, liver and tumor were removed for biochemical and histopathological studies. The remaining animals were observed for recording survival percentage and tumor size. In vitro study on Ehrlich Ascites Carcinoma cells showed that the percentage of nonviable cells (NVC%) increase with increasing G. lucidum concentration. The results revealed also that treatment of EST bearing mice with G. lucidum and/or γ- radiation increased the survivability and decrease the tumor size as compared to EST group. The biochemical analysis for EST bearing group recorded an elevation in the activities of lactate dehydrogenase (LDH), asparta amino transferase (AST) and alanine amino transferase (ALT) in the serum. Also, there was an elevation in the concentration of malondialdehyde (MDA), a marker of lipid peroxidation, accompanied by a decrease in superoxide dismutase (SOD

  19. Experimental Grey Box Model Identification of an Active Gas Bearing

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Pierart Vásquez, Fabián Gonzalo; Niemann, Hans Henrik

    2014-01-01

    in a dynamic model of an active gas bearing and subsequent control loop design. A grey box model is determined based on experiments where piezo actuated valves are used to perturb the journal and hence excite the rotor-bearing system. Such modelling from actuator to output is shown to effciently support...

  20. Design of bearings for rotor systems based on stability

    Science.gov (United States)

    Dhar, D.; Barrett, L. E.; Knospe, C. R.

    1992-01-01

    Design of rotor systems incorporating stable behavior is of great importance to manufacturers of high speed centrifugal machinery since destabilizing mechanisms (from bearings, seals, aerodynamic cross coupling, noncolocation effects from magnetic bearings, etc.) increase with machine efficiency and power density. A new method of designing bearing parameters (stiffness and damping coefficients or coefficients of the controller transfer function) is proposed, based on a numerical search in the parameter space. The feedback control law is based on a decentralized low order controller structure, and the various design requirements are specified as constraints in the specification and parameter spaces. An algorithm is proposed for solving the problem as a sequence of constrained 'minimax' problems, with more and more eigenvalues into an acceptable region in the complex plane. The algorithm uses the method of feasible directions to solve the nonlinear constrained minimization problem at each stage. This methodology emphasizes the designer's interaction with the algorithm to generate acceptable designs by relaxing various constraints and changing initial guesses interactively. A design oriented user interface is proposed to facilitate the interaction.

  1. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    OpenAIRE

    Peter W. Tse; Dong Wang

    2017-01-01

    Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To exten...

  2. Effects of a Worksite Weight-Control Programme in Obese Male Workers: A Randomized Controlled Crossover Trial

    Science.gov (United States)

    Iriyama, Yae; Murayama, Nobuko

    2014-01-01

    Objective: We conducted a randomized controlled crossover trial to evaluate the effects of a new worksite weight-control programme designed for men with or at risk of obesity using a combination of nutrition education and nutrition environmental interventions. Subjects and methods: Male workers with or at risk of obesity were recruited for this…

  3. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen

    Science.gov (United States)

    Jett, T.; Hall, P.; Thom, R.

    1991-01-01

    Various bearing configurations were tested using the Marshall Space Flight Center single bearing tester with LN2 as the cryogenic coolant. The baseline was one Rocketdyne phase one high pressure oxidizer turbopump (HPOTP) pump end 45-mm bore bearing. The bearing configurations that were tested included a Salox/M cage configuration, a silicon nitride ball configuration, an elongated cage configuration, and a Bray 601 grease configuration.

  4. Acanthus ilicifolius plant extract prevents DNA alterations in a transplantable Ehrlich ascites carcinoma-bearing murine model.

    Science.gov (United States)

    Chakraborty, Tridib; Bhuniya, Dipak; Chatterjee, Mary; Rahaman, Mosiur; Singha, Dipak; Chatterjee, Baidya Nath; Datta, Subrata; Rana, Ajay; Samanta, Kartick; Srivastawa, Sunil; Maitra, Sankar K; Chatterjee, Malay

    2007-12-28

    To investigate the chemopreventive efficacy of the Indian medicinal plant Acanthus ilicifolius L Acanthaceae in a transplantable Ehrlich ascites carcinoma (EAC)-bearing murine model. Male Swiss albino mice were divided into four groups: Group A was the untreated normal control; Group B was the EAC control mice group that received serial, intraperitoneal (ip) inoculations of rapidly proliferating 2 x 10(5) viable EAC cells in 0.2 mL of sterile phosphate buffered saline; Group C was the plant extract-treated group that received the aqueous leaf extract (ALE) of the plant at a dose of 2.5 mg/kg body weight by single ip injections, once daily for 10, 20 and 30 consecutive days following tumour inoculation (ALE control); and Group D was the EAC + ALE-treatment group. The chemopreventive potential of the ALE was evaluated in a murine model by studying various biological parameters and genotoxic markers, such as tumour cell count, mean survival of the animals, haematological indices, hepatocellular histology, immunohistochemical expression of liver metallothionein (MT) protein, sister-chromatid exchanges (SCEs), and DNA alterations. Treatment of the EAC-bearing mice with the ALE significantly (P decrement (P single-strand breaks (SSBs) by 38.53% (3.14 +/- 0.31 vs 1.93 +/- 0.23, P < 0.01) in EAC-bearing murine liver. Our data indicate that, ALE is beneficial in restoring haematological and hepatic histological profiles and in lengthening the survival of the animals against the proliferation of ascites tumour in vivo. Finally, the chemopreventive efficacy of the ALE is manifested in limiting MT expression and in preventing DNA alterations in murine liver. The promising results of this study suggest further investigation into the chemopreventive mechanisms of the medicinal plant A. ilicifolius in vivo and in vitro.

  5. Autonomy support and control in weight management: what important others do and say matters.

    Science.gov (United States)

    Ng, Johan Y Y; Ntoumanis, Nikos; Thøgersen-Ntoumani, Cecilie

    2014-09-01

    Drawing from self-determination theory (Ryan & Deci, 2002, Overview of self-determination theory: An organismic-dialectical perspective. In E. L. Deci & R. M. Ryan (Eds.), Handbook of self-determination research (pp. 3-33). Rochester, NY: The University of Rochester Press.), we examined how individuals' psychological needs, motivation, and behaviours (i.e., physical activity and eating) associated with weight management could be predicted by perceptions of their important others' supportive and controlling behaviours. Using a cross-sectional survey design, 235 participants (mean age = 27.39 years, SD = 8.96 years) completed an online questionnaire. Statistical analyses showed that when important others were perceived to be more supportive, participants reported higher levels of more optimal forms of motivation for weight management, which in turn predicted more physical activity and healthy eating behaviours. In contrast, when important others were perceived to be controlling, participants reported higher levels of less optimal forms of motivation, which in turn predicted less physical activity and healthy eating behaviours, as well as more unhealthy eating behaviours. Significant indirect effects were also found from perceived support and control from important others to physical activity and eating behaviours, all in the expected directions. The findings support the importance of important others providing support and refraining from controlling behaviours in order to facilitate motivation and behaviours conducive to successful weight management. What is already known on this subject? Autonomy support is related to basic need satisfaction and autonomous motivation in the context of weight management. In turn, these variables are related to adaptive outcomes for weight management. What does this study add? Measurement of perceived controlling behaviours by important others. Measurement of perceived need thwarting. Structural model on how important others affect

  6. Unhealthy weight control behaviors mediate the association between weight status and weight-specific health-related quality of life in treatment-seeking youth who are obese.

    Science.gov (United States)

    Lim, Crystal S; Gowey, Marissa A; Cohen, Megan J; Silverstein, Janet; Janicke, David M

    2017-03-01

    Examine whether unhealthy and extreme weight control behaviors (WCBs) mediate the relationship between youth weight status and disease-specific health-related quality of life (HRQOL) in treatment-seeking youth who are overweight and obese (OV/OB). 82 youth 10-17 years of age who were OV/OB and attending an outpatient obesity-related medical appointment completed measures assessing unhealthy and extreme WCBs and disease-specific HRQOL. Parents completed a demographic questionnaire and medical staff measured youth height and weight. Regression analyses revealed that unhealthy WCBs mediated the associations between youth weight status and emotional and social avoidance disease-specific HRQOL, such that higher body mass index (BMI) predicted unhealthy WCBs, which were ultimately associated with poorer emotional and social HRQOL. Mediation analyses were not significant for total, physical, teasing/marginalization, and positive attributes disease-specific HRQOL. In addition, extreme WCBs did not mediate the association between youth weight status and any subscales of the disease-specific HRQOL measure. Weight status is an important predictor of disease-specific HRQOL in OV/OB youth; however, the association with emotional and social HRQOL is partially accounted for by youth engagement in unhealthy WCBs. Clinicians and researchers should assess WCBs and further research should explore and evaluate appropriate intervention strategies to address unhealthy WCBs in pediatric weight management prevention and treatment efforts.

  7. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff...... bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas...... the liner has practically no influence on the flexure journal bearing's performance....

  8. Effects of Oral Administration of Fucoidan Extracted from Cladosiphon okamuranus on Tumor Growth and Survival Time in a Tumor-Bearing Mouse Model

    Directory of Open Access Journals (Sweden)

    Yoshiharu Okamoto

    2012-10-01

    Full Text Available We evaluated the anti-tumor activities of the oral administration of fucoidan extracted from Cladosiphon okamuranus using a tumor (colon 26-bearing mouse model. The materials used included low-molecular-weight fucoidan (LMWF: 6.5–40 kDa, intermediate-molecular-weight fucoidan (IMWF: 110–138 kDa and high-molecular-weight fucoidan (HMWF: 300–330 kDa. The IMWF group showed significantly suppressed tumor growth. The LMWF and HMWF groups showed significantly increased survival times compared with that observed in the control group (mice fed a fucoidan-free diet. The median survival times in the control, LMWF, IMWF and HMWF groups were 23, 46, 40 and 43 days, respectively. It was also found that oral administration of fucoidan increased the population of natural killer cells in the spleen. Furthermore, from the results of the experiment using Myd-88 knockout mice, it was found that these effects are related to gut immunity. These results suggest that fucoidan is a candidate anti-tumor functional food.

  9. Weight Loss and the Prevention of Weight Regain: Evaluation of a Treatment Model of Exercise Self-Regulation Generalizing to Controlled Eating.

    Science.gov (United States)

    Annesi, James J; Johnson, Ping H; Tennant, Gisèle A; Porter, Kandice J; Mcewen, Kristin L

    2016-01-01

    For decades, behavioral weight-loss treatments have been unsuccessful beyond the short term. Development and testing of innovative, theoretically based methods that depart from current failed practices is a priority for behavioral medicine. To evaluate a new, theory-based protocol in which exercise support methods are employed to facilitate improvements in psychosocial predictors of controlled eating and sustained weight loss. Women with obesity were randomized into either a comparison treatment that incorporated a print manual plus telephone follow-ups (n = 55) or an experimental treatment of The Coach Approach exercise-support protocol followed after 2 months by group nutrition sessions focused on generalizing self-regulatory skills from an exercise support to a controlled eating context (n = 55). Repeated-measures analysis of variance contrasted group changes in weight, physical activity, fruit and vegetable intake, mood, and exercise- and eating-related self-regulation and self-efficacy over 24 months. Regression analyses determined salient interrelations of change scores over both the weight-loss phase (baseline-month 6) and weight-loss maintenance phase (month 6-month 24). Improvements in all psychological measures, physical activity, and fruit and vegetable intake were significantly greater in the experimental group where a mean weight loss of 5.7 kg (6.1% of initial body weight) occurred at month 6, and was largely maintained at a loss of 5.1 kg (5.4%) through the full 24 months of the study. After establishing temporal intervals for changes in self-regulation, self-efficacy, and mood that best predicted improvements in physical activity and eating, a consolidated multiple mediation model suggested that change in self-regulation best predicted weight loss, whereas change in self-efficacy best predicted maintenance of lost weight. Because for most participants loss of weight remained greater than that required for health benefits, and costs for treatment

  10. Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage.

    Science.gov (United States)

    Hailer, Frank; Kutschera, Verena E; Hallström, Björn M; Klassert, Denise; Fain, Steven R; Leonard, Jennifer A; Arnason, Ulfur; Janke, Axel

    2012-04-20

    Recent studies have shown that the polar bear matriline (mitochondrial DNA) evolved from a brown bear lineage since the late Pleistocene, potentially indicating rapid speciation and adaption to arctic conditions. Here, we present a high-resolution data set from multiple independent loci across the nuclear genomes of a broad sample of polar, brown, and black bears. Bayesian coalescent analyses place polar bears outside the brown bear clade and date the divergence much earlier, in the middle Pleistocene, about 600 (338 to 934) thousand years ago. This provides more time for polar bear evolution and confirms previous suggestions that polar bears carry introgressed brown bear mitochondrial DNA due to past hybridization. Our results highlight that multilocus genomic analyses are crucial for an accurate understanding of evolutionary history.

  11. [The efficacy of e-health management on weight control in adolescents: a systematic review].

    Science.gov (United States)

    Su, Mei-Chen; Lin, Chia-Ling; Tsao, Lee-Ing

    2014-02-01

    Advances during the past decade have made it feasible to apply e-health methods to chronic disease management. Researchers have recently begun applying these methods to weight control. The application of e-health management methods to weight control in adolescents has yet to be investigated empirically. This study conducted a systematic review of reports discussing the weight-control effects of e-health management in adolescents. Researchers searched 6 electronic databases for relevant articles published between 1995 and April 2013. Data were collected using inclusion and exclusion criteria. A modified Jadad Scale was used to evaluate the quality of the identified articles. Seven studies met the inclusion criterion of targeting adolescent subject populations. A total of 3728 adolescents and 1394 parents participated in these studies. The majority of participants were overweight girls and median participant ages ranged from 12.52 (SD = 3.15) to 15.31 (SD = 0.69). All studies reported that e-health management reduced body mass index and body fat percentage. Four studies indicate that e-health management may improve physical activity knowledge and skills. However, diet control outcomes among the seven studies varied. Empirical results demonstrate that e-health management significantly affects weight control. However, the effectiveness of log-in versus primary outcome indicators was inconclusive. Future studies should consider the use of incentives, reminder systems, and other strategies to enhance website usage. The development of an Internet-based, computer-tailored weight-management intervention for overweight adolescents and the development of an appropriate care model are recommended.

  12. How strongly does appetite counter weight loss? Quantification of the feedback control of human energy intake

    Science.gov (United States)

    Polidori, David; Sanghvi, Arjun; Seeley, Randy; Hall, Kevin D.

    2016-01-01

    Objective To quantify the feedback control of energy intake in response to long-term covert manipulation of energy balance in free-living humans. Methods We used a validated mathematical method to calculate energy intake changes during a 52 week placebo-controlled trial in 153 patients treated with canagliflozin, a sodium glucose co-transporter inhibitor that increases urinary glucose excretion thereby resulting in weight loss without patients being directly aware of the energy deficit. We analyzed the relationship between the body weight time course and the calculated energy intake changes using principles from engineering control theory. Results We discovered that weight loss leads to a proportional increase in appetite resulting in eating above baseline by ~100 kcal/day per kg of lost weight – an amount more than 3-fold larger than the corresponding energy expenditure adaptations. Conclusions While energy expenditure adaptations are often thought to be the main reason for slowing of weight loss and subsequent regain, feedback control of energy intake plays an even larger role and helps explain why long-term maintenance of a reduced body weight is so difficult. PMID:27804272

  13. Comparative morphology of the muscles of mastication in the giant panda and the Asiatic black bear.

    Science.gov (United States)

    Endo, Hideki; Taru, Hajime; Yamamoto, Masako; Arishima, Kazuyoshi; Sasaki, Motoki

    2003-06-01

    The morphological differences in the muscles of mastication between the giant panda (Ailuropoda melanoleuca) and the Asiatic black bear (Ursus thibetanus) were sought to confirm the adaptational strategy of these muscles in the giant panda. We measured some skull characteristics and weighed the muscles of mastication, and macroscopically observed the muscles of mastication in the two species. The noticeable differences between the two species are classified as follows: (1) The size ratio of the zygomatic width was much larger in the giant panda than in the Asiatic black bear. (2) The weight ratio of the two pterygoid muscles was also much larger in the giant panda than in the Asiatic black bear. (3) The lateral slips of the temporal muscles are thicker and stronger in the Asiatic black bear than in the giant panda. (4) The deep layer of the masseter muscle was rostrocaudally divided, and a complicated running of tendons is observed in the giant panda. (5) The two pterygoid muscles were much larger and well-developed in the giant panda than in the Asiatic black bear. The points (1) and (4) may be related to the generation of the force necessary to chew the bamboo in the giant panda. We thought that the large mass of the masseter and temporal muscles are needed in this species. In the points of (2) and (5), the two pterygoid muscles were obviously different in form and weight ratio between the two species. We suggest that the two pterygoid muscles may act as an additional force generator to dorsoventrally press and crush bamboo stems.

  14. Use of hyaluronidase to improve chemical immobilization of free-ranging polar bears (Ursus maritimus).

    Science.gov (United States)

    Cattet, Marc R L; Obbard, Martyn E

    2010-01-01

    We assessed the efficacy and safety of hyaluronidase to improve chemical immobilization of free-ranging polar bears (Ursus maritimus) captured from helicopter by remote drug delivery along the Ontario coast line of northwestern James Bay and southern Hudson Bay during September 2005 and October 2007. We used a single blind study design in which one person prepared and loaded all darts without the shooter knowing whether hyaluronidase (150 IU per dart) or sterile water was added to the immobilizing drug mixture of xylazine and zolazepam-tiletamine (XZT). We found that we often required more than one dart to immobilize bears in the control group (XZT+sterile water; >1 dart for 15 of 28 captures) versus the treatment group (XZT+hyaluronidase; >1 dart for seven of 26 captures). As a consequence, treatment bears were generally immobilized with smaller XZT dosages (7.9 vs. 9.4 mg/kg; P = 0.08) and shorter induction (10 vs. 15 min; P = 0.004) than control bears. We found no differences in vital rates and serum biochemistry results between control and treatment bears. We did find, however, that induction times correlated directly with rectal temperature at polar bears. Overall we found hyaluronidase to be effective and safe for capture of polar bears. We recommend further study to determine whether effects of hyaluronidase are dose dependent and recommend that others involved with capture of seasonally fat species such as polar bears consider use of hyaluronidase to improve chemical immobilization.

  15. Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis

    Science.gov (United States)

    Cong, Feiyun; Chen, Jin; Dong, Guangming; Pecht, Michael

    2013-04-01

    Rolling element bearing faults are among the main causes of breakdown in rotating machines. In this paper, a rolling bearing fault model is proposed based on the dynamic load analysis of a rotor-bearing system. The rotor impact factor is taken into consideration in the rolling bearing fault signal model. The defect load on the surface of the bearing is divided into two parts, the alternate load and the determinate load. The vibration response of the proposed fault signal model is investigated and the fault signal calculating equation is derived through dynamic and kinematic analysis. Outer race and inner race fault simulations are realized in the paper. The simulation process includes consideration of several parameters, such as the gravity of the rotor-bearing system, the imbalance of the rotor, and the location of the defect on the surface. The simulation results show that different amplitude contributions of the alternate load and determinate load will cause different envelope spectrum expressions. The rotating frequency sidebands will occur in the envelope spectrum in addition to the fault characteristic frequency. This appearance of sidebands will increase the difficulty of fault recognition in intelligent fault diagnosis. The experiments given in the paper have successfully verified the proposed signal model simulation results. The test rig design of the rotor bearing system simulated several operating conditions: (1) rotor bearing only; (2) rotor bearing with loader added; (3) rotor bearing with loader and rotor disk; and (4) bearing fault simulation without rotor influence. The results of the experiments have verified that the proposed rolling bearing signal model is important to the rolling bearing fault diagnosis of rotor-bearing systems.

  16. Polar bears at risk

    Energy Technology Data Exchange (ETDEWEB)

    Norris, S.; Rosentrater, L.; Eid, P.M. [WWF International Arctic Programme, Oslo (Norway)

    2002-05-01

    Polar bears, the world's largest terrestrial carnivore, spend much of their lives on the arctic sea ice. This is where they hunt and move between feeding, denning, and resting areas. The world population, estimated at 22,000 bears, is made up of 20 relatively distinct populations varying in size from a few hundred to a few thousand animals. About 60 per cent of all polar bears are found in Canada. In general, the status of this species is stable, although there are pronounced differences between populations. Reductions in the extent and thickness of sea ice has lead the IUCN Polar Bear Specialist Group to describe climate change as one of the major threats facing polar bears today. Though the long-term effects of climate change will vary in different areas of the Arctic, impacts on the condition and reproductive success of polar bears and their prey are likely to be negative. Longer ice-free periods resulting from earlier break-up of sea ice in the spring and later formation in the fall is already impacting polar bears in the southern portions of their range. In Canada's Hudson Bay, for example, bears hunt on the ice through the winter and into early summer, after which the ice melts completely, forcing bears ashore to fast on stored fat until freeze-up in the fall. The time bears have on the ice to hunt and build up their body condition is cut short when the ice melts early. Studies from Hudson Bay show that for every week earlier that ice break-up occurs, bears will come ashore 10 kg lighter and in poorer condition. It is likely that populations of polar bears dividing their time between land and sea will be severely reduced and local extinctions may occur as greenhouse gas emissions continue to rise and sea ice melts. Expected changes in regional weather patterns will also impact polar bears. Rain in the late winter can cause maternity dens to collapse before females and cubs have departed, thus exposing occupants to the elements and to predators. Such

  17. An algorithm for nonlinear thermal analysis of fuel bearing pads

    International Nuclear Information System (INIS)

    Attia, M.H.; D'Silva, N.

    1983-01-01

    An algorithm has been developed for accurate prediction of the temperature field in a CANDU fuel bearing pad and the extent of the nucleate boiling in the crevice region. The methodology recognizes the nonlinear nature of the problem due to the fact that local boiling is both controlling and being controlled by the conditions of heat transfer at the boundaries. The finite difference model accounts for the volumetric effect of the thermal contact resistance at the bearing pad/pressure tube interface. It also allows the evaluation of the thermal barrier effect caused by applying an oxide film on the radiused surface of the bearing pad. Information pertaining to the distribution of the coefficient of heat transfer over water-cooled surfaces has been generated. Analysis of the results indicated the significance of considering the nonlinear behaviour of the system in determining its state of equilibrium. It also indicated that, depending on the thickness of the oxide layer and the position of the bearing pad along the core of the reactor, the nucleate boiling process can be prevented

  18. Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2002-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

  19. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity.

    Science.gov (United States)

    Dubois, Sara; Fraser, David

    2013-09-12

    The "pot bears" received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  20. Cancer-induced anorexia in tumor-bearing mice is dependent on cyclooxygenase-1.

    Science.gov (United States)

    Ruud, Johan; Nilsson, Anna; Engström Ruud, Linda; Wang, Wenhua; Nilsberth, Camilla; Iresjö, Britt-Marie; Lundholm, Kent; Engblom, David; Blomqvist, Anders

    2013-03-01

    It is well-established that prostaglandins (PGs) affect tumorigenesis, and evidence indicates that PGs also are important for the reduced food intake and body weight loss, the anorexia-cachexia syndrome, in malignant cancer. However, the identity of the PGs and the PG producing cyclooxygenase (COX) species responsible for cancer anorexia-cachexia is unknown. Here, we addressed this issue by transplanting mice with a tumor that elicits anorexia. Meal pattern analysis revealed that the anorexia in the tumor-bearing mice was due to decreased meal frequency. Treatment with a non-selective COX inhibitor attenuated the anorexia, and also tumor growth. When given at manifest anorexia, non-selective COX-inhibitors restored appetite and prevented body weight loss without affecting tumor size. Despite COX-2 induction in the cerebral blood vessels of tumor-bearing mice, a selective COX-2 inhibitor had no effect on the anorexia, whereas selective COX-1 inhibition delayed its onset. Tumor growth was associated with robust increase of PGE(2) levels in plasma - a response blocked both by non-selective COX-inhibition and by selective COX-1 inhibition, but not by COX-2 inhibition. However, there was no increase in PGE(2)-levels in the cerebrospinal fluid. Neutralization of plasma PGE(2) with specific antibodies did not ameliorate the anorexia, and genetic deletion of microsomal PGE synthase-1 (mPGES-1) affected neither anorexia nor tumor growth. Furthermore, tumor-bearing mice lacking EP(4) receptors selectively in the nervous system developed anorexia. These observations suggest that COX-enzymes, most likely COX-1, are involved in cancer-elicited anorexia and weight loss, but that these phenomena occur independently of host mPGES-1, PGE(2) and neuronal EP(4) signaling. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. The effect of aquatic therapy on postural balance and muscle strength in stroke survivors--a randomized controlled pilot trial.

    Science.gov (United States)

    Noh, Dong Koog; Lim, Jae-Young; Shin, Hyung-Ik; Paik, Nam-Jong

    2008-01-01

    To evaluate the effect of an aquatic therapy programme designed to increase balance in stroke survivors. A randomized, controlled pilot trial. Rehabilitation department of a university hospital. Ambulatory chronic stroke patients (n = 25):13 in an aquatic therapy group and 12 in a conventional therapy group. The aquatic therapy group participated in a programme consisting of Ai Chi and Halliwick methods, which focused on balance and weight-bearing exercises. The conventional therapy group performed gym exercises. In both groups, the interventions occurred for 1 hour, three times per week, for eight weeks. The primary outcome measures were Berg Balance Scale score and weight-bearing ability, as measured by vertical ground reaction force during four standing tasks (rising from a chair and weight-shifting forward, backward and laterally). Secondary measures were muscle strength and gait. Compared with the conventional therapy group, the aquatic therapy group attained significant improvements in Berg Balance Scale scores, forward and backward weight-bearing abilities of the affected limbs, and knee flexor strength (P aquatic therapy based on the Halliwick and Ai Chi methods in stroke survivors. Because of limited power and a small population base, further studies with larger sample sizes are required.

  2. Preventing Weight Gain in Women in Rural Communities: A Cluster Randomised Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Catherine Lombard

    2016-01-01

    Full Text Available Obesity is reaching epidemic proportions in both developed and developing countries. Even modest weight gain increases the risk for chronic illness, yet evidence-based interventions to prevent weight gain are rare. This trial will determine if a simple low-intensity intervention can prevent weight gain in women compared to general health information.We conducted a 1-yr pragmatic, cluster randomised controlled trial in 41 Australian towns (clusters randomised using a computer-generated randomisation list for intervention (n = 21 or control (n = 20. Women aged 18 to 50 yr were recruited from the general population to receive a 1-yr self-management lifestyle intervention (HeLP-her consisting of one group session, monthly SMS text messages, one phone coaching session, and a program manual, or to a control group receiving one general women's health education session. From October 2012 to April 2014 we studied 649 women, mean age 39.6 yr (+/- SD 6.7 and BMI of 28.8 kg/m(2 (+/- SD 6.9 with the primary outcome weight change between groups at 1 yr. The mean change in the control was +0.44 kg (95% CI -0.09 to 0.97 and in the intervention group -0.48 kg (95% CI -0.99 to 0.03 with an unadjusted between group difference of -0.92 kg (95% CI -1.67 to -0.16 or -0.87 kg (95% CI -1.62 to -0.13 adjusted for baseline values and clustering. Secondary outcomes included improved diet quality and greater self-management behaviours. The intervention appeared to be equally efficacious across all age, BMI, income, and education subgroups. Loss to follow-up included 23.8% in the intervention group and 21.8% in the control group and was within the anticipated range. Limitations include lack of sensitive tools to measure the small changes to energy intake and physical activity. Those who gained weight may have been less inclined to return for 1 yr weight measures.A low intensity lifestyle program can prevent the persistent weight gain observed in women. Key features included

  3. Fetal body weight and the development of the control of the cardiovascular system in fetal sheep.

    Science.gov (United States)

    Frasch, M G; Müller, T; Wicher, C; Weiss, C; Löhle, M; Schwab, K; Schubert, H; Nathanielsz, P W; Witte, O W; Schwab, M

    2007-03-15

    Reduced birth weight predisposes to cardiovascular diseases in later life. We examined in fetal sheep at 0.76 (n = 18) and 0.87 (n = 17) gestation whether spontaneously occurring variations in fetal weight affect maturation of autonomic control of cardiovascular function. Fetal weights at both gestational ages were grouped statistically in low (LW) and normal weights (NW) (P fetal sheep not constituting a major malnutritive condition. Mean fetal blood pressure (FBP) of all fetuses was negatively correlated to fetal weight at 0.76 but not 0.87 gestation (P fetal heart rate depended on fetal weight (P fetal weight within the normal weight span is accompanied by a different trajectory of development of sympathetic blood pressure and vagal heart rate control. This may contribute to the development of elevated blood pressure in later life. Examination of the underlying mechanisms and consequences may contribute to the understanding of programming of cardiovascular diseases.

  4. Daily text messaging for weight control among racial and ethnic minority women: randomized controlled pilot study.

    Science.gov (United States)

    Steinberg, Dori M; Levine, Erica L; Askew, Sandy; Foley, Perry; Bennett, Gary G

    2013-11-18

    Daily self-monitoring of diet and physical activity behaviors is a strong predictor of weight loss success. Text messaging holds promise as a viable self-monitoring modality, particularly among racial/ethnic minority populations. This pilot study evaluated the feasibility of a text messaging intervention for weight loss among predominantly black women. Fifty obese women were randomized to either a 6-month intervention using a fully automated system that included daily text messages for self-monitoring tailored behavioral goals (eg, 10,000 steps per day, no sugary drinks) along with brief feedback and tips (n=26) or to an education control arm (n=24). Weight was objectively measured at baseline and at 6 months. Adherence was defined as the proportion of text messages received in response to self-monitoring prompts. The average daily text messaging adherence rate was 49% (SD 27.9) with 85% (22/26) texting self-monitored behavioral goals 2 or more days per week. Approximately 70% (16/23) strongly agreed that daily texting was easy and helpful and 76% (16/21) felt the frequency of texting was appropriate. At 6 months, the intervention arm lost a mean of 1.27 kg (SD 6.51), and the control arm gained a mean of 1.14 kg (SD 2.53; mean difference -2.41 kg, 95% CI -5.22 to 0.39; P=.09). There was a trend toward greater text messaging adherence being associated with greater percent weight loss (r=-.36; P=.08), but this did not reach statistical significance. There was no significant association between goal attainment and text messaging adherence and no significant predictors of adherence. Given the increasing penetration of mobile devices, text messaging may be a useful self-monitoring tool for weight control, particularly among populations most in need of intervention. Clinicaltrials.gov: NCT00939081; http://clinicaltrials.gov/show/NCT00939081 (Archived by WebCite at http://www.webcitation.org/6KiIIcnk1).

  5. Experimental Evaluation of Superconductor Flywheel Energy Storage System with Hybrid Type Active Magnetic Bearing

    International Nuclear Information System (INIS)

    Lee, J. P.; Kim, H. G.; Han, S. C.

    2012-01-01

    In this paper, we designed Active Magnetic Bearing (AMB) for large scale Superconductor Flywheel Energy Storage System (SFESS) and PD controller for AMB. And we experimentally evaluated SFESS including hybrid type AMB. The radial AMB was designed to provide force slew rate that was sufficient for the unbalance disturbances at the maximum operating speed. The thrust AMB is a hybrid type where a permanent magnet carries the weight of the flywheel and an electromagnetic actuator generates the dynamic control force. We evaluated the design performance of the manufactured AMB through comparison of FEM analysis and the results of experimental force measurement. In order to obtain gains of PD controller and design a notch filter, the system identification was performed through measuring frequency response including dynamics for the AMBs, a power amp and a sensor using a sine swept test method after levitating the flywheel. Through measuring the current input of the AMBs and the orbit of a flywheel according to rotational speed, we verified excellent control performance of the AMBs with small amount current for the large scale SFESS.

  6. Feasibility of Applying Active Lubrication to Dynamically Loaded Fluid Film Bearings

    DEFF Research Database (Denmark)

    Estupinan, Edgar Alberto; Santos, Ilmar

    2009-01-01

    The feasibility of modifying the dynamics of the thin fluid films of dynamically loaded journal bearings, using different strategies of active lubrication is studied in this work. A significant reduction in the vibration levels, wear and power friction losses, is expected. Particularly, the focus...... of this study is on the analysis of main crankshaft bearings, where the conventional hydrodynamic lubrication is modified by injecting oil at actively controllable pressures, through orifices circumferentially located along the bearing surface....

  7. Dieting and unhealthy weight control behaviors during adolescence: associations with 10-year changes in body mass index.

    Science.gov (United States)

    Neumark-Sztainer, Dianne; Wall, Melanie; Story, Mary; Standish, Amber R

    2012-01-01

    Dieting and unhealthy weight control behaviors are common among adolescents and questions exist regarding their long-term effect on weight status. To examine 10-year longitudinal associations between dieting and unhealthy weight control behaviors and changes in body mass index (BMI) from adolescence to young adulthood. A diverse population-based sample of middle school and high school adolescents participating in Project EAT (Eating and Activity in Teens and Young Adults) was followed up for 10 years. Participants (N = 1,902) completed surveys in 1998-1999 (Project EAT-I), 2003-2004 (Project EAT-II), and 2008-2009 (Project EAT-III). Dieting and unhealthy weight control behaviors at Time 1 and Time 2 were used to predict 10-year changes in BMI at Time 3, adjusting for sociodemographic characteristics and Time 1 BMI. Dieting and unhealthy weight control behaviors at both Time 1 and Time 2 predicted greater BMI increases at Time 3 in males and females, as compared with no use of these behaviors. For example, females using unhealthy weight control behaviors at both Time 1 and Time 2 increased their BMI by 4.63 units as compared with 2.29 units in females not using these behaviors (p meals and reporting eating very little (females and males), use of food substitutes (males), and use of diet pills (females). Findings clearly indicate that dieting and unhealthy weight control behaviors, as reported by adolescents, predict significant weight gain over time. Copyright © 2012 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  8. Obesity: locus of control, body image, weight loss, and age-at-onset.

    Science.gov (United States)

    Wineman, N M

    1980-01-01

    In a retrospective investigation designed to measure locus of control, body image, and weight loss in Overeaters Anonymous members who had childhood, adolescence, or adulthood onset of obesity, 116 subjects were grouped according to age at onset of obesity and the year they joined OA. A convenience, volunteer sample of OA members completed a demographic data questionnaire, Rotter's Social Reaction. Inventory, and Secord and Jourard's Body Cathexis Scale. Significant overweight percentage differences were not found when the three age-at-onset groups were compared. Significant differences emerged, however, for adolescent-onset group persons who were categorized as "old" members; they had a larger weight loss and were more satisfied with their body image. A positive linear relationship between greater perception of internal control and a good body image was found in the entire adulthood-onset group. Weight loss and good body image of the oldest adolescent-onset group probably was the outcome of their association with a self-help group i.e., OA. Assessment of developmental issues related to the time of initial weight gain may indicate which treatment regime would be most effective.

  9. Dynamic modeling of moment wheel assemblies with nonlinear rolling bearing supports

    Science.gov (United States)

    Wang, Hong; Han, Qinkai; Luo, Ruizhi; Qing, Tao

    2017-10-01

    Moment wheel assemblies (MWA) have been widely used in spacecraft attitude control and large angle slewing maneuvers over the years. Understanding and controlling vibration of MWAs is a crucial factor to achieving the desired level of payload performance. Dynamic modeling of a MWA with nonlinear rolling bearing supports is conducted. An improved load distribution analysis is proposed to more accurately obtain the contact deformations and angles between the rolling balls and raceways. Then, the bearing restoring forces are then obtained through iteratively solving the load distribution equations at every time step. The effects of preload condition, surface waviness, Hertz contact and elastohydrodynamic lubrication could all be reflected in the nonlinear bearing forces. Considering the mass imbalances of the flywheel, flexibility of supporting structures and rolling bearing nonlinearity, the dynamic model of a typical MWA is established based upon the energy theorem. Dynamic tests are conducted to verify the nonlinear dynamic model. The influences of flywheel mass eccentricity and inner/outer waviness amplitudes on the dynamic responses are discussed in detail. The obtained results would be useful for the design and vibration control of the MWA system.

  10. Qualification of high damping seismic isolation bearings for the ALMR

    International Nuclear Information System (INIS)

    Tajirian, F.F.; Gluekler, E.L.; Chen, W.P.; Kelly, J.M.

    1992-01-01

    The Advanced Liquid Metal Reactor (ALMR) seismic isolation system consists of high damping steel-laminated elastomeric bearings. This type of bearing is used worldwide to isolate buildings and large critical components. A comprehensive testing program has been developed to qualify the use of this system for the ALMR. The program includes material characterization tests, various scale bearing tests, full-size bearing tests, shake table tests, and long-term aging tests. The main tasks and objectives of this program are described in the paper. Additionally, a detailed assessment of completed ALMR bearing test results will be provided. This assessment will be mainly based on half-scale bearing tests performed at the Earthquake Engineering Research Center (EERC) of the University of California at Berkeley and at the Energy Technology Engineering Center (ETEC). These tests were funded by the U.S. Department of Energy (DOE). Both static and dynamic tests were performed. Bearings with two types of end connections were tested: dowelled and bolted. The parameters examined will include the vertical, horizontal stiffness and damping of the bearings under different loading conditions up to failure. This will determine the available margins in the bearings above the design vertical load and horizontal displacement. Additionally, the self-centering capability of the bearings after an earthquake will be addressed. On the basis of these findings, recommendations can be made if necessary, to improve current manufacturing procedures, quality control, and procurement specifications. (author)

  11. Genetic relationships of extant brown bears (Ursus arctos) and polar bears (Ursus maritimus).

    Science.gov (United States)

    Cronin, Matthew A; MacNeil, Michael D

    2012-01-01

    Polar bears (Ursus maritimus) and brown bears (Ursus arctos) are closely related species for which extensive mitochondrial and nuclear phylogenetic comparisons have been made. We used previously published genotype data for 8 microsatellite DNA loci from 930 brown bears in 19 populations and 473 polar bears in 16 populations to compare the population genetic relationships of extant populations of the species. Genetic distances (Nei standard distance = 1.157), the proportion of private alleles (52% of alleles are not shared by the species), and Bayesian cluster analysis are consistent with morphological and life-history characteristics that distinguish polar bears and brown bears as different species with little or no gene flow among extant populations.

  12. Response of Pinus ponderosa Seedlings to Stylet-Bearing Nematodes

    Science.gov (United States)

    Viglierchio, D. R.

    1979-01-01

    Of 12 stylet-bearing nematodes used for inoculations, Pratylenchus penetrans, P. brachyurus, P. vulnus, Ditylenchus destructor, Meloidogyne incognita, M. javanica, and M. hapla reproduced on Pinus ponderosa, while Xiphinema index, Aphelenchus avenae, Paratylenehus neoamblycephalus, Tylenchulus semipenetrans, and Macroposthonia xenoplax did not. P. vulnus, P. brachyurus, P. penetrans, A. avenae, D. destructor, T. semipenetrans, and P. neoamblycephalus significantly suppressed both the shoot and root wet weights of ponderosa pine seedlings obtained from stands in five different locations. X. index significantly suppressed root wet weights, M. xenoplax siguificantly suppressed shoot wet weight, and M. incognita, M. javanica, and M. hapla suppressed neither at the inoculation levels used. Injurious nematodes tended to suppress root growth more than shoot growth. Seedlings from two locations produced greater shoot growth wet weight than did seedlings from the other three locations. The more injurious nematodes tended to cause an increase in the water content of shoots. Frequency analyses of seedling population shoot-root ratios indicated that ponderosa pine seedlings could be selected for better shoot-root ratios as well as for resistance to several pathogenic nematodes. PMID:19300659

  13. Associations between body mass index, weight control concerns and behaviors, and eating disorder symptoms among non-clinical Chinese adolescents

    Science.gov (United States)

    2010-01-01

    Background Previous research with adolescents has shown associations of body weight, weight control concerns and behaviors with eating disorder symptoms, but it is unclear whether these associations are direct or whether a mediating effect exists. This study was conducted to investigate the prevalence of overweight and obesity, weight control concerns and behaviors, and eating disorder symptoms and to examine the mediating function of weight control concerns and behaviors on the relationship between body mass index (BMI) and eating disorder symptoms among non-clinical adolescents in China. Methods A cross-sectional survey among 2019 adolescent girls and 1525 adolescent boys in the 7th, 8th, 10th and 11th grades from seven cities in China was conducted. Information on weight control concerns and behaviors, and eating disorder symptoms (Eating Disorder Inventory-3) were collected from the adolescents using a self-administrated questionnaire. Results Weight control concerns and behaviors, and eating disorder symptoms were prevalent among the study population. A high proportion of adolescents scored at or above the threshold on the eating disorder inventory (EDI) subscale such as bulimia, interoceptive deficits, perfectionism, and maturity fears, which indicated eating disorder symptoms. High BMI was significantly associated with high score of drive for thinness, body dissatisfaction, bulimia, low self-esteem, interceptive deficits and maturity fears, so do perceived body weight status. Almost all weight control concerns and behaviors we investigated were significantly associated with high EDI subscale scores. When weight control concerns were added to the model, as shown in the model, the association between BMI and tendency of drive to thinness and bulimia was attenuated but still kept significant. The association between BMI and body dissatisfaction were no further significant. The association of BMI and drive for thinness, body dissatisfaction and bulimia was

  14. Associations between body mass index, weight control concerns and behaviors, and eating disorder symptoms among non-clinical Chinese adolescents

    Directory of Open Access Journals (Sweden)

    Hu Xiaoqi

    2010-06-01

    Full Text Available Abstract Background Previous research with adolescents has shown associations of body weight, weight control concerns and behaviors with eating disorder symptoms, but it is unclear whether these associations are direct or whether a mediating effect exists. This study was conducted to investigate the prevalence of overweight and obesity, weight control concerns and behaviors, and eating disorder symptoms and to examine the mediating function of weight control concerns and behaviors on the relationship between body mass index (BMI and eating disorder symptoms among non-clinical adolescents in China. Methods A cross-sectional survey among 2019 adolescent girls and 1525 adolescent boys in the 7th, 8th, 10th and 11th grades from seven cities in China was conducted. Information on weight control concerns and behaviors, and eating disorder symptoms (Eating Disorder Inventory-3 were collected from the adolescents using a self-administrated questionnaire. Results Weight control concerns and behaviors, and eating disorder symptoms were prevalent among the study population. A high proportion of adolescents scored at or above the threshold on the eating disorder inventory (EDI subscale such as bulimia, interoceptive deficits, perfectionism, and maturity fears, which indicated eating disorder symptoms. High BMI was significantly associated with high score of drive for thinness, body dissatisfaction, bulimia, low self-esteem, interceptive deficits and maturity fears, so do perceived body weight status. Almost all weight control concerns and behaviors we investigated were significantly associated with high EDI subscale scores. When weight control concerns were added to the model, as shown in the model, the association between BMI and tendency of drive to thinness and bulimia was attenuated but still kept significant. The association between BMI and body dissatisfaction were no further significant. The association of BMI and drive for thinness, body

  15. The relationship between maternal periodontitis and preterm low birth weight: A case-control study

    Directory of Open Access Journals (Sweden)

    Satheesh Mannem

    2011-01-01

    Full Text Available Background: The relationship between periodontal diseases in pregnancy and children born prematurely or with low birth weight has been increasingly investigated, showing positive and negative results, respectively. Objective: To evaluate the association between Maternal Periodontitis and Preterm delivery or Low Birth Weight. Materials and Methods: In this case-control study, 104 pregnant women without systemic disease or other risk factors for preterm labor were chosen. The control group (n = 52 had term labor (infants ≥37 weeks and the case group (n = 52 had preterm labor (infants <37 weeks. Plaque index, bleeding index, and birth weight were measured. Results: The data of plaque index (cases 1.21±0.56; controls 0.63±0.31, bleeding index (cases, 2.08±0.62; controls, 1.52±0.61, birth weight (cases, 2.01±0.36; controls 2.87±0.32, and Probing Pocket Depth (PPD ≥4mm and Clinical Attachment Level (CAL ≥3mm in at least 4 teeth (odds ratio 137.50, P value < 0.0001 revealed a statistically significant difference between the two groups P< 0.05. Conclusions: A noticeable relationship between periodontal health and duration of pregnancy; periodontal disease could be a risk factor for preterm labor. Oral hygiene maintenance should be a part of prenatal care protocol.

  16. Xenoendocrine pollutants May Reduce Size of Sexual Organs in East Greenland Polar Bears (Ursus Maritimus)

    DEFF Research Database (Denmark)

    Sonne, Christian; Leifsson, Pall S.; Dietz, Rune

    2006-01-01

    .01) and uterine horn length and HCB (p = 0.02). The study suggests thatthere is an impact from xenoendocrine pollutants on the size of East Greenland polar bear genitalia. This may pose a riskto this polar bear subpopulation in the future because of reduced sperm and egg quality/quantity and uterus and penis size......Reproductive organs from 55 male and 44 female East Greenland polar bears were examined to investigate the potential negative impact from organohalogen pollutants (OHCs). Multiple regressions normalizing for age showed a significant inverse relationship between OHCs and testis length and baculum...... length and weight, respectively, and was found in both subadults (dichlorodiphenyl trichloroethanes, dieldrin, chlordanes, hexacyclohexanes, polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs)) and adults (hexachlorobenzene [HCB]) (all p

  17. SisterTalk: final results of a culturally tailored cable television delivered weight control program for Black women

    OpenAIRE

    Risica, Patricia Markham; Gans, Kim M; Kumanyika, Shiriki; Kirtania, Usree; Lasater, Thomas M

    2013-01-01

    Background Obesity among Black women continues to exceed that of other women. Most weight loss programs created without reference to specific cultural contexts are less effective for Black than White women. Weight control approaches accessible to Black women and adapted to relevant cultural contexts are important for addressing this problem. This paper reports the final results of SisterTalk, the randomized controlled trial of a cable TV weight control program oriented toward Black women. Met...

  18. Intelligent Control System Taking Account of Cooperativeness Using Weighting Information on System Objective

    Directory of Open Access Journals (Sweden)

    Masaki Takahashi

    2004-08-01

    Full Text Available This study considers an intelligent control system to integrate flexibly its components by using weighted information where the system evaluation is reflected. Such system evaluates the information flowing through the components and converts them by weighting depending on the degree of importance. Integration of components based on the system evaluation enables a system consisting of them to realize various, flexible and adaptive control. In this study, the intelligent control method is applied to a swing up and stabilization control problem of a number of cart and pendulum systems on a restricted straight guide. To stabilize the pendulum in a restricted environment, each system should realize not only a swing-up and stabilization control of the pendulum, but also a position control of the cart to avoid collision or deadlock. The experiment using a real apparatus demonstrated that the controller learning light interaction acquires egoistic character, the controller learning heavy interaction behaves altruistically, and the controller equally considering self cart and another cart becomes cooperative. In other words, these autonomous decentralized controllers can acquire various characters and flexibility for cooperation.

  19. R+D works for the further development of high temperature reactors. (1) Captive bearing experiments for active magnetic bearings. (2) Captive bearing test for HTR blowers

    International Nuclear Information System (INIS)

    1991-01-01

    When using active magnetic bearings as blower shaft bearings, blower motors and bearings must be protected against mechanical damage in case of faults (example: total electrical supply failure due to the supply cables breaking). So-called captive bearings are provided, in order to be able to shut the blowers down safely in such faults. These captive bearings are roller bearings which are additionally fitted in the area of the blower shaft bearings, to prevent mechanical contact between the blower rotor and stator. As there was little experience available for the given boundary conditions, such as - speed, - acceleration, - bearing load, - bearing dimensions, - ambient conditions, appropriate development and tests had to be carried out. It was important to determine suitable captive bearings and the necessary ambient conditions, which will make it possible to support the failures of the magnetic bearings to be expected in 40 years' operation of the reactor without damage and to meet the requirements of the captive bearings. (orig./GL) [de

  20. EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

    Directory of Open Access Journals (Sweden)

    Emin GÜLLÜ

    2000-01-01

    Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

  1. Frequency-Weighted Model Predictive Control of Trailing Edge Flaps on a Wind Turbine Blade

    DEFF Research Database (Denmark)

    Castaignet, Damien; Couchman, Ian; Poulsen, Niels Kjølstad

    2013-01-01

    flapwise blade root moment and trailing edge flap deflection. Frequency-weighted MPC is chosen for its ability to handle constraints on the trailing edge flaps deflection, and to target at loads with given frequencies only. The controller is first tested in servo-aeroelastic simulations, before being......This paper presents the load reduction achieved with trailing edge flaps during a full-scale test on a Vestas V27 wind turbine. The trailing edge flap controller is a frequency-weighted linear model predictive control (MPC) where the quadratic cost consists of costs on the zero-phase filtered...

  2. The Association between Inappropriate Weight Control Behaviors and Suicide Ideation and Attempt among Korean Adolescents.

    Science.gov (United States)

    Lee, Sang Ah; Jang, Suk Yong; Shin, Jaeyong; Ju, Yeong Jun; Nam, Jin Young; Park, Eun Cheol

    2016-10-01

    Suicide is a leading cause of death among adolescents globally, and body weight is also a recognized reason for adolescent suicide. Therefore, we investigated the association between weight control behaviors (WCB) and suicide ideation and attempt, focusing on inappropriate weight control measures. We used data from the 2014 Korea Youth Risk Behavior Web-based Survey, representing a total of 35,224 boys and 34,361 girls aged 12 to 18 years. Adolescents were classified into groups based on WCB: appropriate WCB, inappropriate WCB, and no WCB. We performed logistic regression models to examine associations between WCB and suicide ideation and attempt, controlling for covariates. Both boys and girls with inappropriate WCB were more likely to report suicide ideation and attempt. Underweight and normal weight boys with inappropriate WCB were more likely to think or attempt suicide, and underweight girls with inappropriate WCB were also more likely to attempt suicide. Among five common WCB combinations, the combination of "regular exercise, fasting, eating less" was highly associated with suicide ideation and attempt. We confirmed that inappropriate WCB is associated with suicide ideation and attempt among Korean adolescents. Given the high incidence rate of suicide among adolescents and the adverse effect of inappropriate WCB, encouraging adolescents to control their weight in healthy ways is imperative.

  3. No difference in joint awareness after mobile- and fixed-bearing total knee arthroplasty: 3-year follow-up of a randomized controlled trial.

    Science.gov (United States)

    Schotanus, M G M; Pilot, P; Vos, R; Kort, N P

    2017-12-01

    To compare the patients ability to forget the artificial knee joint in everyday life who were randomized to be operated for mobile- or fixed-bearing total knee arthroplasty (TKA). This single-center randomized controlled trial evaluated the 3-year follow-up of the cemented mobile- and fixed-bearing TKA from the same brand in a series of 41 patients. Clinical examination was during the pre-, 6-week, 6-month, 1-, 2- and 3-year follow-up containing multiple patient-reported outcome measures (PROMs) including the 12-item Forgotten Joint Score (FJS-12) at 3 years. Effect size was calculated for each PROM at 3-year follow-up to quantify the size of the difference between both bearings. At 3-year follow-up, general linear mixed model analysis showed that there were no significant or clinically relevant differences between the two groups for all outcome measures. Calculated effect sizes were small (awareness was slightly lower in patients operated with the MB TKA with comparable improved clinical outcome and PROMs at 3-year follow-up. Measuring joint awareness with the FJS-12 is useful and provides more stringent information at 3-year follow-up compared to other PROMs and should be the PROM of choice at each follow-up after TKA. Level I, randomized controlled trial.

  4. Actively lubricated bearings applied as calibrated shakers to aid parameter identification in rotordynamics

    DEFF Research Database (Denmark)

    Santos, Ilmar; Cerda Varela, Alejandro Javier

    2013-01-01

    The servo valve input signal and the radial injection pressure are the two main parameters responsible for dynamically modifying the journal oil film pressure and generating active fluid film forces in controllable fluid film bearings. Such fluid film forces, resulting from a strong coupling...... domain and the application of such a controllable bearing as a calibrated shaker aiming at determining the frequency response function (FRF) of rotordynamic systems; b) experimental quantification of the influence of the supply pressure and servo valve input signal on the FRF of rotor-journal bearing...... between hydrodynamic, hydrostatic and controllable lubrication regimes, can be used either to control or to excite rotor lateral vibrations. An accurate characterization of the active oil film forces is of fundamental importance to elucidate the feasibility of applying the active lubrication as non...

  5. On the relative contribution of the paretic leg to the control of posture after stroke.

    NARCIS (Netherlands)

    Roerdink, M.; Geurts, A.C.H.; Haart, M. de; Beek, P.J.

    2009-01-01

    BACKGROUND: Reduced postural steadiness and asymmetry of weight bearing are characteristic for posture after stroke. OBJECTIVE: To examine the relative contribution of each leg to postural control in a cohort of 33 stroke patients at 5 stages during 3 months of inpatient rehabilitation, while taking

  6. On the relative contribution of the paretic leg to the control of posture after stroke

    NARCIS (Netherlands)

    Roerdink, M.; Geurts, A.C.; de Haart, M.; Beek, P.J.

    2009-01-01

    Background: Reduced postural steadiness and asymmetry of weight bearing are characteristic for posture after stroke. Objective: To examine the relative contribution of each leg to postural control in a cohort of 33 stroke patients at 5 stages during 3 months of inpatient rehabilitation, while taking

  7. The fracture sites of atypical femoral fractures are associated with the weight-bearing lower limb alignment.

    Science.gov (United States)

    Saita, Yoshitomo; Ishijima, Muneaki; Mogami, Atsuhiko; Kubota, Mitsuaki; Baba, Tomonori; Kaketa, Takefumi; Nagao, Masashi; Sakamoto, Yuko; Sakai, Kensuke; Kato, Rui; Nagura, Nana; Miyagawa, Kei; Wada, Tomoki; Liu, Lizu; Obayashi, Osamu; Shitoto, Katsuo; Nozawa, Masahiko; Kajihara, Hajime; Gen, Hogaku; Kaneko, Kazuo

    2014-09-01

    Atypical femoral fractures (AFFs) are stress-related fractures that are speculated to associate with long-term treatment with bisphosphonates for osteoporosis. A history of AFF is a high risk factor for the development of a subsequent AFF in the same location of the contralateral femur, suggesting that a patient's individual anatomical factor(s) are related to the fracture site of AFFs. In this study, we investigated the radiographs of fourteen AFFs (four bilateral fractures among ten patients) treated at six hospitals associated with our university between 2005 and 2010. The fracture site and standing femorotibial angle (FTA), which reflects the mechanical axis of the lower limb, were measured on weight-bearing lower limb radiographs. The fracture site and FTA of patients with typical femoral fractures (TFF) were compared to those of patients with AFFs. The correlations were examined using Spearman's rank correlation coefficients. The fracture locations in the femora were almost the same in the patients with bilateral AFFs. There was a positive correlation between the fracture site and the standing FTA in the patients with AFFs (r=0.82, 95% confidence interval; 0.49 to 0.94), indicating that the larger the standing FTA (varus alignment), the more distal the site of the fracture in the femur. The FTA of the patients with atypical diaphyseal femoral fracture were significantly larger compared to that of those with not only atypical subtrochanteric fractures but also TFFs. In conclusion, the fracture sites of AFFs are associated with the standing lower limb alignment, while those of TFFs are not. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. [New data on the phylogeography and genetic diversity of the brown bear Ursus arctos Linnaeus, 1758 of northeastern Eurasia (mtDNA control region polymorphism analysis)].

    Science.gov (United States)

    Salomashkina, V V; Kholodova, M V; Tiuten'kov, O Iu; Moskvitina, N S; Erokhin, N G

    2014-01-01

    An analysis of polymorphism of the fragment of the control region of mitochondrial DNA of 53 tissue samples of the brown bear Ursus arctos from several regions of the eastern part of Russia was carried out. It was found that most of the described haplotypes belong to cluster 3a, the most common in Eurasia, and do not form regionally specific haplogroups. However, among the bears from Western and Eastern Siberia, as well as the island of Kunashir, three haplotypes were identified, which are close to the haplogroup typical of Eastern Hokkaido bears. The assumption was made of the existence in Siberia and the Far East of one or more Pleistocene refugia.

  9. Passive magnetic bearing configurations

    Science.gov (United States)

    Post, Richard F [Walnut Creek, CA

    2011-01-25

    A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

  10. Body image and weight control in South Africans 15 years or older: SANHANES-1.

    Science.gov (United States)

    Mchiza, Zandile J; Parker, Whadi-Ah; Makoae, Mokhantso; Sewpaul, Ronel; Kupamupindi, Takura; Labadarios, Demetre

    2015-09-30

    South African studies have suggested that differences in obesity prevalence between groups may be partly related to differences in body image and body size dissatisfaction. However, there has never been a national study that measured body image and its relationship to weight control in the country. Hence, the main aim of the study was to examine body image in relation to body mass index and weight control in South Africa. A cross-sectional survey and a secondary analyses of data were undertaken for 6 411 South Africans (15+ years) participating in the first South African National Health and Nutrition Examination Survey. Body image was investigated in relation to weight status and attempts to lose or gain weight. Data were analysed using STATA version 11.0. Descriptive statistics are presented as counts (numbers), percentages, means, standard error of means, and 95 % confidence intervals. Any differences in values were considered to be significantly different if the confidence intervals did not overlap. Overall, 84.5 % participants had a largely distorted body image and 45.3 % were highly dissatisfied about their body size. Overweight and obese participants under estimated their body size and desired to be thinner. On the other hand, normal- and under-weight participants over estimated their body size and desired to be fatter. Only 12.1 and 10.1 % of participants attempted to lose or gain weight, respectively, mainly by adjusting dietary intake and physical activity. Body mass index appears to influence body image and weight adjustment in South Africa. South Africans at the extreme ends of the body mass index range have a largely distorted body image and are highly dissatisfied by it. This suggests a need for health education and beneficial weight control strategies to halt the obesity epidemic in the country.

  11. Framing obesity a disease: Indirect effects of affect and controllability beliefs on weight bias.

    Science.gov (United States)

    Nutter, Sarah; Alberga, Angela S; MacInnis, Cara; Ellard, John H; Russell-Mayhew, Shelly

    2018-05-24

    Obesity has been declared a disease by the American and Canadian Medical Associations. Although these declarations sparked much debate as to the impact of framing obesity as a disease on weight bias, strong empirical research is needed to examine this impact. The current study examined the impact of framing obesity a disease on weight bias, focusing on moderating and mediating processes. A sample of 309 participants living in the United States or Canada was recruited from Crowdflower. Participants completed measures of demographics, ideology, general attitudes, and previous contact quality and quantity with people living with obesity. Participants then read one of three articles as part of an experimental manipulation framing obesity as a disease, obesity not as a disease, and a control article unrelated to obesity. Post-manipulation included measures of affect, disgust, empathy, blame, and weight bias. Orthogonal contrasts were used to compare the obesity-disease condition to the obesity-not-disease condition and control condition. The manipulation had a direct effect on affect (emotions), such that affect toward individuals with obesity was more positive in the obesity-disease condition than the obesity-not-disease and control condition combined. Exploration of moderating effects revealed that both the belief in a just world and weight satisfaction moderated the relationship between the obesity-disease manipulation and blame for obesity. Two models of indirect effects on weight bias were also examined, which demonstrated that the obesity-disease manipulation predicted less weight bias through more positive affect (model 1) as well as less weight bias through decreased blame among individuals high in belief in a just world (model 2). This study further highlights the complex effects of declaring obesity a disease, uncovering a new direction for future research into the role of affect as well as indirect effects of characterising obesity a disease on weight bias.

  12. Inhibitory Control and Hedonic Response towards Food Interactively Predict Success in a Weight Loss Programme for Adults with Obesity

    Directory of Open Access Journals (Sweden)

    Timo Brockmeyer

    2016-10-01

    Full Text Available Objective: Low inhibitory control and strong hedonic response towards food are considered to contribute to overeating and obesity. Based on previous research, the present study aimed at examining the potentially crucial interplay between these two factors in terms of long-term weight loss in people with obesity. Methods: BMI, inhibitory control towards food, and food liking were assessed in obese adults prior to a weight reduction programme (OPTIFAST® 52. After the weight reduction phase (week 13 and the weight loss maintenance phase (week 52, participants' BMI was re-assessed. Results: Baseline BMI, inhibitory control and food liking alone did not predict weight loss. As hypothesised, however, inhibitory control and food liking interactively predicted weight loss from baseline to week 13 and to week 52 (albeit the latter effect was less robust. Participants with low inhibitory control and marked food liking were less successful in weight reduction. Conclusion: These findings underscore the relevance of the interplay between cognitive control and food reward valuation in the maintenance of obesity.

  13. Using new technologies to promote weight management: a randomised controlled trial study protocol.

    Science.gov (United States)

    Jane, Monica; Foster, Jonathan; Hagger, Martin; Pal, Sebely

    2015-05-27

    Over the last three decades, overweight and obesity and the associated health consequences have become global public health priorities. Methods that have been tried to address this problem have not had the desired impact, suggesting that other approaches need to be considered. One of the lessons learned throughout these attempts is that permanent weight loss requires sustained dietary and lifestyle changes, yet adherence to weight management programs has often been noted as one of the biggest challenges. This trial aims to address this issue by examining whether social media, as a potential health promotion tool, will improve adherence to a weight management program. To test the effectiveness of this measure, the designated program will be delivered via the popular social networking site Facebook, and compared to a standard delivery method that provides exactly the same content but which is communicated through a pamphlet. The trial will be conducted over a period of twelve weeks, with a twelve week follow-up. Although weight loss is expected, this study will specifically investigate the effectiveness of social media as a program delivery method. The program utilised will be one that has already been proven to achieve weight loss, namely The CSIRO Total Wellbeing Diet. This project will be conducted as a 3-arm randomised controlled trial. One hundred and twenty participants will be recruited from the Perth community, and will be randomly assigned to one of the following three groups: the Facebook group, the pamphlet group, or a control group. The Facebook Group will receive the weight management program delivered via a closed group in Facebook, the Pamphlet Group will be given the same weight management program presented in a booklet, and the Control Group will follow the Australian Dietary Guidelines and the National Physical Activity Guidelines for Adults as usual care. Change in weight, body composition and waist circumference will be initial indicators of

  14. Obesity, Body Image, Depression, and Weight-control Behaviour Among Female University Students in Korea

    OpenAIRE

    Jun, Eun Mi; Choi, Seung Bae

    2014-01-01

    Background: Obesity has become epidemic worldwide and 31.0% of Korean adults are obese. Obesity is the main cause of chronic diseases, such as diabetes, hypertension, cardiac disease, and cancer. The purpose of the study was to examine obesity, body image, depression, and weight-control behaviour among Korean female university students and investigate the differences in body image, depression, and weight-control behaviour with respect to obesity. Methods: This study examined obesity, body ima...

  15. Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication

    DEFF Research Database (Denmark)

    Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar

    2013-01-01

    and the pressure and velocity fields in the injection nozzle are compared. The simplified theoretical model has been validated against the CFD results and experimentally using a test rig. The test rig consists of a flexible rotor supported by a ball bearing and a controllable hybrid gas bearing. The results show...

  16. Changes in body weight and food choice in those attempting smoking cessation: a cluster randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Leslie Wilma S

    2012-05-01

    Full Text Available Abstract Background Fear of weight gain is a barrier to smoking cessation and significant cause of relapse for many people. The provision of nutritional advice as part of a smoking cessation programme may assist some in smoking cessation and perhaps limit weight gain. The aim of this study was to determine the effect of a structured programme of dietary advice on weight change and food choice, in adults attempting smoking cessation. Methods Cluster randomised controlled design. Classes randomised to intervention commenced a 24-week intervention, focussed on improving food choice and minimising weight gain. Classes randomised to control received “usual care”. Results Twenty-seven classes in Greater Glasgow were randomised between January and August 2008. Analysis, including those who continued to smoke, showed that actual weight gain and percentage weight gain was similar in both groups. Examination of data for those successful at giving up smoking showed greater mean weight gain in intervention subjects (3.9 (SD 3.1 vs. 2.7 (SD 3.7 kg. Between group differences were not significant (p = 0.23, 95% CI −0.9 to 3.5. In comparison to baseline improved consumption of fruit and vegetables and breakfast cereal were reported in the intervention group. A higher percentage of control participants continued smoking (74% vs. 66%. Conclusions The intervention was not successful at minimising weight gain in comparison to control but was successful in facilitating some sustained improvements in the dietary habits of intervention participants. Improved quit rates in the intervention group suggest that continued contact with advisors may have reduced anxieties regarding weight gain and encouraged cessation despite weight gain. Research should continue in this area as evidence suggests that the negative effects of obesity could outweigh the health benefits achieved through reductions in smoking prevalence. Trial registration Current Controlled Trials

  17. A double-blind, placebo-controlled trial of sibutramine for clozapine-associated weight gain.

    Science.gov (United States)

    Henderson, D C; Fan, X; Copeland, P M; Borba, C P; Daley, T B; Nguyen, D D; Zhang, H; Hayden, D; Freudenreich, O; Cather, C; Evins, A E; Goff, D C

    2007-02-01

    This study sought to examine the effectiveness of sibutramine, a weight loss agent, on clozapine-associated weight gain. This was a 12-week double-blind, placebo controlled, randomized trial of sibutramine for weight loss in obese clozapine-treated schizophrenia or schizoaffective disorder subjects. Ten patients were enrolled into the placebo group and 11 patients into the sibutramine group. There were no significant baseline differences between the two groups on age, gender, education, ethnicity, diagnosis, weight, body mass index (BMI), and blood pressure. At week 12, there were no significant differences in changes in weight, BMI, abdominal and waist circumferences, Hba1c, fasting glucose, or cholesterol levels. Sibutramine treatment did not show significant weight loss compared with placebo in clozapine-treated patients with schizophrenia or schizoaffective disorder. Further research with a larger sample size and longer follow-up duration is warranted.

  18. Comparison of fixed-bearing and mobile-bearing total knee arthroplasty after high tibial osteotomy.

    Science.gov (United States)

    Hernigou, Philippe; Huys, Maxime; Pariat, Jacques; Roubineau, François; Flouzat Lachaniette, Charles Henri; Dubory, Arnaud

    2018-02-01

    There is no information comparing the results of fixed-bearing total knee replacement and mobile-bearing total knee replacement in the same patients previously treated by high tibial osteotomy. The purpose was therefore to compare fixed-bearing and mobile-bearing total knee replacements in patients treated with previous high tibial osteotomy. We compared the results of 57 patients with osteoarthritis who had received a fixed-bearing prosthesis after high tibial osteotomy with the results of 41 matched patients who had received a rotating platform after high tibial osteotomy. The match was made for length of follow-up period. The mean follow-up was 17 years (range, 15-20 years). The patients were assessed clinically and radiographically. The pre-operative knee scores had no statistically significant differences between the two groups. So was the case with the intra-operative releases, blood loss, thromboembolic complications and infection rates in either group. There was significant improvement in both groups of knees, and no significant difference was observed between the groups (i.e., fixed-bearing and mobile-bearing knees) for the mean Knee Society knee clinical score (95 and 92 points, respectively), or the Knee Society knee functional score (82 and 83 points, respectively) at the latest follow-up. However, the mean post-operative knee motion was higher for the fixed-bearing group (117° versus 110°). In the fixed-bearing group, one knee was revised because of periprosthetic fracture. In the rotating platform mobile-bearing group, one knee was revised because of aseptic loosening of the tibial component. The Kaplan-Meier survivorship for revision at ten years of follow-up was 95.2% for the fixed bearing prosthesis and 91.1% for the rotating platform mobile-bearing prosthesis. Although we did manage to detect significant differences mainly in clinical and radiographic results between the two groups, we found no superiority or inferiority of the mobile-bearing

  19. Hydrodynamic sliding bearings vs. roller bearings. Segmented sliding bearings for higher rotational speed; Hydrodynamische Gleitlager versus Waelzlager. Segmentgleitlager fuer hoehere Drehzahlen

    Energy Technology Data Exchange (ETDEWEB)

    Hagenhoff, M.; Sauer, M. [Main-Metall-Giesserei Fritz Schorr GmbH und Co. KG, Altenglan (Germany)

    2004-10-01

    Hydrodynamic sliding bearings are considered only in cases when roller bearings reach their speed limits and there is no other solution. However, this view neglects the fact that there are modern, optimised sliding bearings which have more advantages over roller bearings than should be expected. Many producers of sliding bearings also have computer programs enabling them to offer customised solutions, i.e. optimal adaptation of the bearings to their specific operating conditions. (orig.) [German] Hydrodynamische Gleitlager werden oft erst dann in Betracht gezogen, wenn man an die Drehzahlgrenzen von Waelzlagern stoesst und keine andere sinnvolle Alternative mehr in Frage kommt. Dabei uebersieht man leicht, dass es moderne, optimierte Gleitlagerkonstruktionen gibt, die weitaus haeufiger ihre Staerken im Vergleich zu Waelzlagern ausspielen koennen als zunaechst vermutet. Viele Gleitlagerhersteller haben zudem heute Berechnungsprogramme zur Verfuegung, die eine optimale Anpassung der Lager an die speziellen Betriebsbedingungen erlauben. (orig.)

  20. Exposure–response model for sibutramine and placebo: suggestion for application to long-term weight-control drug development

    Science.gov (United States)

    Han, Seunghoon; Jeon, Sangil; Hong, Taegon; Lee, Jongtae; Bae, Soo Hyeon; Park, Wan-su; Park, Gab-jin; Youn, Sunil; Jang, Doo Yeon; Kim, Kyung-Soo; Yim, Dong-Seok

    2015-01-01

    No wholly successful weight-control drugs have been developed to date, despite the tremendous demand. We present an exposure–response model of sibutramine mesylate that can be applied during clinical development of other weight-control drugs. Additionally, we provide a model-based evaluation of sibutramine efficacy. Data from a double-blind, randomized, placebo-controlled, multicenter study were used (N=120). Subjects in the treatment arm were initially given 8.37 mg sibutramine base daily, and those who lost sibutramine, including the placebo effect, were modeled using NONMEM 7.2. An asymptotic model approaching the final body weight was chosen to describe the time course of weight loss. Extent of weight loss was described successfully using a sigmoidal exposure–response relationship of the drug with a constant placebo effect in each individual. The placebo effect was influenced by subjects’ sex and baseline body mass index. Maximal weight loss was predicted to occur around 1 year after treatment initiation. The difference in mean weight loss between the sibutramine (daily 12.55 mg) and placebo groups was predicted to be 4.5% in a simulation of 1 year of treatment, with considerable overlap of prediction intervals. Our exposure–response model, which included the placebo effect, is the first example of a quantitative model that can be used to predict the efficacy of weight-control drugs. Similar approaches can help decision-making during clinical development of novel weight-loss drugs. PMID:26392753