WorldWideScience

Sample records for weddell seal leptonychotes

  1. Antarctophthirus carlinii (Anoplura: Echinophthiriidae), a new species from the Weddell seal Leptonychotes weddelli.

    Science.gov (United States)

    Leonardi, María Soledad; Poljak, Sebastián; Carlini, Pedro; Galliari, Juan; Bobinac, Magalí; Santos, Mercedes; Márquez, María E; Negrete, Javier

    2014-11-01

    As a part of an ongoing long-term study on the biology of pack-ice seals in Antarctica, we had the opportunity to collect lice from Weddell seals (Leptonychotes weddelli). We did not find the original description of this host-parasite association. Antarctophthirus ogmorhini had previously been reported as a parasite for the Weddell seal, but the information is, to a certain extent, confusing. During the development of the present study, we had access to literature concerning the presence of A. ogmorhini on this host, which, to our knowledge, was not determined in any of the previous works on this species. We compared lice collected from Weddell seals with A. ogmorhini obtained from the type host, the leopard seal (Hydrurga leptonyx), and we found that both species can be distinguished. The main differences are the characteristic pattern of chaetotaxy in the dorsal side of the head in lice from Weddell seals, the size and form of the pseudopenis, and the distribution and size of the fringe of setae surrounding the genital opening. Considering the conservative morphology, and ecological and evolutionary features of sucking lice, we proposed that lice from Weddell seals constitute a new species. In the present work, we described and illustrated adults of this new species collected from Weddell seals during the austral summer of 2014 at the Danco Coast, Antarctic Peninsula.

  2. Trace element analysis in the serum and hair of Antarctic leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Rachael [Faculty of Veterinary Science, University of Sydney, NSW 2006 Australia (Australia); Australian Marine Mammal Research Centre PO Box 20 Mosman, NSW 2088 (Australia)], E-mail: rgray@vetsci.usyd.edu.au; Canfield, Paul [Faculty of Veterinary Science, University of Sydney, NSW 2006 (Australia); Rogers, Tracey [Australian Marine Mammal Research Centre PO Box 20 Mosman, NSW 2088 (Australia); Evolution and Ecology Research Centre and School of Biological Earth and Environmental Sciences, University of New South Wales, NSW 2052 (Australia)

    2008-07-25

    Leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii, occupy an upper trophic level within the Antarctic ecosystem and are useful indicator species in the Southern Ocean of trace element concentrations. Reference values for the concentration of 19 trace elements were determined in the serum and hair of leopard and Weddell seals sampled in Eastern Antarctica. These reference values can be used as 'baseline' levels for monitoring trace element concentrations in these species. Greater trace element concentrations were determined in hair compared to serum, indicating different time scales of trace element accumulation in these samples. For the majority of trace elements, except for Se in the leopard seal samples and Cr in the Weddell seal samples, significant regression relationships for trace element concentrations in hair and serum were not elucidated. Significant differences were determined in the concentrations of seven out of 15 elements with hair type, moult and new, in the leopard seal; concentrations in moult hair were determined to be greater than in new hair for all elements except Zn. Hair analysis was determined to be useful for monitoring exposure to trace elements and when collected off the ice from moulting seals, hair can be employed as a non-invasive sample for trace element analysis in leopard and Weddell seals.

  3. Trace element analysis in the serum and hair of Antarctic leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii.

    Science.gov (United States)

    Gray, Rachael; Canfield, Paul; Rogers, Tracey

    2008-07-25

    Leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii, occupy an upper trophic level within the Antarctic ecosystem and are useful indicator species in the Southern Ocean of trace element concentrations. Reference values for the concentration of 19 trace elements were determined in the serum and hair of leopard and Weddell seals sampled in Eastern Antarctica. These reference values can be used as 'baseline' levels for monitoring trace element concentrations in these species. Greater trace element concentrations were determined in hair compared to serum, indicating different time scales of trace element accumulation in these samples. For the majority of trace elements, except for Se in the leopard seal samples and Cr in the Weddell seal samples, significant regression relationships for trace element concentrations in hair and serum were not elucidated. Significant differences were determined in the concentrations of seven out of 15 elements with hair type, moult and new, in the leopard seal; concentrations in moult hair were determined to be greater than in new hair for all elements except Zn. Hair analysis was determined to be useful for monitoring exposure to trace elements and when collected off the ice from moulting seals, hair can be employed as a non-invasive sample for trace element analysis in leopard and Weddell seals.

  4. Assessment of legacy and emerging persistent organic pollutants in Weddell seal tissue (Leptonychotes weddellii) near McMurdo Sound, Antarctica

    Energy Technology Data Exchange (ETDEWEB)

    Trumble, Stephen J.; Robinson, Eleanor M. [Baylor University, One Bear Place 97388, Waco, TX 76798-7388 (United States); Noren, Shawn R. [Institute of Marine Science, University of California, Santa Cruz, CA (United States); Usenko, Sascha, E-mail: Sascha_Usenko@baylor.edu [Baylor University, One Bear Place 97388, Waco, TX 76798-7388 (United States); Davis, Jay [U.S. Fish and Wildlife Service, Western Washington Fish and Wildlife Office, Lacey, WA 98503 (United States); Kanatous, Shane B. [Department of Biology, Colorado State University, Fort Collins, CO 80523-1878 (United States)

    2012-11-15

    Muscle samples were collected from pup, juvenile and adult Weddell seals (Leptonychotes weddellii) near McMurdo Sound, Antarctica during the austral summer of 2006. Blubber samples were collected from juvenile and adult seals. Samples were analyzed for emerging and legacy persistent organic pollutants (POPs) including current and historic-use organochlorine pesticides, polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs). Of the 41 target analytes, 28 contaminants were recovered from the Weddell seal blubber, in this order of prevalence: p,p Prime -DDE, p,p Prime -DDT, trans-nonachlor, mirex, cis-nonachlor, PCB 153, PCB 138, dieldrin, heptachlor epoxide, nonachlor III, PCB 187, oxychlordane, cis-chlordane, PCB 118, PBDE 47, PCB 156, PCB 149, PCB 180, PCB 101, PCB 170, PCB 105, o,p Prime -DDT, PCB 99, trans-chlordane, PCB 157, PCB 167, PCB 189, and PCB 114. Fewer POPs were found in the muscle samples, but were similar in the order of prevalence to that of the blubber: p,p Prime -DDE, o,p Prime -DDT, trans-nonachlor, nonachlor III, oxychlordane, p,p Prime -DDT, dieldrin, mirex, cis-nonachlor, PCB 138, and PCB 105. Besides differences in toxicant concentrations reported between the muscle and blubber, we found differences in POP levels according to age class and suggest that differences in blubber storage and/or mobilization of lipids result in age class differences in POPs. To our knowledge, such ontogenetic associations are novel. Importantly, data from this study suggest that p,p Prime -DDT is becoming less prevalent temporally, resulting in an increased proportion of its metabolite p,p Prime -DDE in the tissues of this top predator. In addition, this study is among the first to identify a PBDE congener in Weddell seals near the McMurdo Station. This may provide evidence of increased PBDE transport and encroachment in Antarctic wildlife. -- Highlights: Black-Right-Pointing-Pointer PBDE measuring in Weddell seal blubber. Black

  5. Histophysiological observations on the external auditory meatus, middle, and inner ear of the Weddell seal (Leptonychotes weddelli).

    Science.gov (United States)

    Welsch, U; Riedelsheimer, B

    1997-10-01

    The external auditory meatus, middle, and inner ear of the deep-diving Weddell seal (Leptonychotes weddelli) were studied with light microscopic, histological, and histochemical techniques in order to contribute to the open discussion on the orientation of this seal in the darkness of the deep Antarctic seas. The external auditory meatus is characterized by a well-developed venous plexus, single apocrine ceruminous, and numerous holocrine sebaceous glands and an incomplete tube of elastic cartilage. The tympanic membrane is comprised of two layers of radially and concentrically arranged collagen fibers and by elastic fibers which are concentrated in the outer part of the ear drum. The tympanic cavity is lined by a pseudostratified prismatic ciliated epithelium with goblet cells; a plexus of wide venous vessels marks the subepithelial lamina propria. The cochlea is about 10 mm high and forms about two and a half turns. The richly pigmented stria vascularis is well vascularized, while the cell-rich prominentia spiralis contains only single small blood vessels. The organ of Corti contains one row of inner and three rows of outer hair cells. Cells of Hensen, Claudius, and Boettcher are present. The basilar membrane is of comparatively uniform simple structure and is composed of abundant glycoproteins, proteoglycans, collagenous fibers, and the loose tissue of the tympanal layer. The spiral ligament is built up by abundant proteoglycans and a complex system of radial and concentric collagen fibers; close to the osseous wall of the bony cochlea it contains fine elastic fibers. The inner zone of the osseous wall of the cochlea strikingly contains hyaline cartilage. The thin lamina spiralis ossea is covered by a limbus spiralis with interdental cells secreting the lamina tectoria, which has a fibrous texture and contains glycoproteins and negatively charged components.

  6. New data on Weddell seal (Leptonychotes weddellii) colonies: A genetic analysis of a top predator from the Ross Sea, Antarctica.

    Science.gov (United States)

    Zappes, Ighor Antunes; Fabiani, Anna; Sbordoni, Valerio; Rakaj, Arnold; Palozzi, Roberto; Allegrucci, Giuliana

    2017-01-01

    In this paper, we studied the genetic variability in Weddell seal from colonies in Terra Nova Bay and Wood Bay, both sites located in the Ross Sea area, Antarctica. Two mitochondrial genes and one nuclear gene, with different mutation rates, were sequenced to investigate the haplotype diversity of the colonies and to test for a possible recent expansion. Fifteen microsatellites were used to analyze their genetic structure. Sequenced genes and microsatellites were also used to estimate the effective population size of the studied colonies and the Ross Sea seal population. The Ross Sea has a high density population of Weddel seals, with an estimated effective number of 50,000 females, and 1,341 individuals for the sampling area, possibly due to its high primary production. The colonies showed high diversity (Hd > 0.90) and many exclusive haplotypes (> 75%), likely a consequence of the surprisingly high site fidelity of Weddell seals, despite the proximity of the colonies. Nevertheless, there was low microsatellite differentiation between colonies, suggesting that they are part of a single larger population. Their expansion seemed to have started during the last glacial cycle (around 58,000 years ago), indicating that the Ross Sea seal populations have been present in the area for long time, probably due to the lack of hunting by humans and terrestrial predation. As a top predator, the role of Weddell seals in the Ross Sea ecology is crucial, and its demographic dynamics should be monitored to follow the future changes of such an important ecosystem.

  7. Detección de anticuerpos Anti-brucella en focas de Weddell (Leptonychotes weddellii) de Cabo Shirref, Antártica Detection of anti-brucella antibodies in Weddell seals (Leptonychotes weddellii) from cape Shirref, Antarctica

    OpenAIRE

    O. BLANK; P. RETAMAL; P. ABALOS; D. TORRES

    2002-01-01

    Posterior al hallazgo de anticuerpos anti-Brucella en muestras de lobo fino antártico (Arctocephalus gazella), el estudio serológico en Pinnipedia Antárticos se continuó con el fin de determinar la presencia de anticuerpos anti-Brucella en otras especies. Se colectaron muestras de sangre y de fluido extravascular de 12 ejemplares de foca de Weddell (Leptonychotes weddellii) encontrados en el Sitio de Especial Interés Científico (SEIC) Nº 32 y sitio CCAMLR Ecosystem Monitoring Program (CEMP) N...

  8. New data on Weddell seal (Leptonychotes weddellii colonies: A genetic analysis of a top predator from the Ross Sea, Antarctica.

    Directory of Open Access Journals (Sweden)

    Ighor Antunes Zappes

    Full Text Available In this paper, we studied the genetic variability in Weddell seal from colonies in Terra Nova Bay and Wood Bay, both sites located in the Ross Sea area, Antarctica. Two mitochondrial genes and one nuclear gene, with different mutation rates, were sequenced to investigate the haplotype diversity of the colonies and to test for a possible recent expansion. Fifteen microsatellites were used to analyze their genetic structure. Sequenced genes and microsatellites were also used to estimate the effective population size of the studied colonies and the Ross Sea seal population. The Ross Sea has a high density population of Weddel seals, with an estimated effective number of 50,000 females, and 1,341 individuals for the sampling area, possibly due to its high primary production. The colonies showed high diversity (Hd > 0.90 and many exclusive haplotypes (> 75%, likely a consequence of the surprisingly high site fidelity of Weddell seals, despite the proximity of the colonies. Nevertheless, there was low microsatellite differentiation between colonies, suggesting that they are part of a single larger population. Their expansion seemed to have started during the last glacial cycle (around 58,000 years ago, indicating that the Ross Sea seal populations have been present in the area for long time, probably due to the lack of hunting by humans and terrestrial predation. As a top predator, the role of Weddell seals in the Ross Sea ecology is crucial, and its demographic dynamics should be monitored to follow the future changes of such an important ecosystem.

  9. Field use of ultrasonography to characterize the reproductive tract and early pregnancy in a phocid, the Weddell seal (Leptonychotes weddellii).

    Science.gov (United States)

    Shero, Michelle R; Adams, Gregg P; Burns, Jennifer M

    2015-12-01

    The utility of transrectal ultrasonography was tested in a field setting to characterize the reproductive tract and detect early pregnancy (embryonic vesicles ultrasonography was attempted in January/February 2014 to examine the entire reproductive tract (uterine horns and body, ovaries with follicles and corpora lutea) using a 5-10 MHz linear-array probe with a 70 cm-long extension. A single pregnancy was detected in 14 of 17 seals (82.4%) as a circular or guitar-pick shaped nonechogenic (black) vesicle with a clearly visible echogenic border within the lumen of the uterus. The stage of embryonic development (ostensibly the gestational age) varied markedly among individuals, ranging from a vesicle with no embryo proper to a large fetus with an ocular orbit, nose/mouth, limb buds, spinal column, umbilical cord, and prominent vasculature. Two of the pregnant seals were re-examined 3-6 days after the initial examination to obtain longitudinal growth rates. Images of one or both ovaries were obtained in nine and seven of the 19 examinations, respectively. Numerous ovarian follicles (3 to 12 mm diameter) were detected and animals typically had a single well-perfused corpus luteum (determined by Doppler color-flow) ipsilateral to the uterine horn containing the pregnancy. We conclude that real-time transrectal ultrasonography is an effective tool for characterizing reproductive events in phocids including ovarian dynamics, and for elucidating the nature of embryonic diapause. © 2015 Wiley Periodicals, Inc.

  10. Distribution, density and abundance of Antarctic ice seals off Queen Maud Land and the eastern Weddell Sea

    OpenAIRE

    Gurarie, Eliezer; Bengtson, John L.; Bester, Marthán N.; Blix, Arnoldus Schytte; Cameron, Michael; Bornemann, Horst; Nordøy, Erling S.; Plötz, Joachim; Steinhage, Daniel; Boveng, Peter

    2017-01-01

    The Antarctic Pack Ice Seal (APIS) Program was initiated in 1994 to estimate the abundance of four species of Antarctic phocids: the crabeater seal Lobodon carcinophaga , Weddell seal Leptonychotes weddellii , Ross seal Ommatophoca rossii and leopard seal Hydrurga leptonyx and to identify ecological relationships and habitat use patterns. The Atlantic sector of the Southern Ocean (the eastern sector of the Weddell Sea) was surveyed by research teams from Germany, Norway and South Africa usi...

  11. Brucella antibody seroprevalence in Antarctic seals (Arctocephalus gazella, Leptonychotes weddellii and Mirounga leonina).

    Science.gov (United States)

    Jensen, Silje-Kristin; Nymo, Ingebjørg Helena; Forcada, Jaume; Hall, Ailsa; Godfroid, Jacques

    2013-09-03

    Brucellosis is a worldwide infectious zoonotic disease caused by Gram-negative bacteria of the genus Brucella, and Brucella infections in marine mammals were first reported in 1994. A serosurvey investigating the presence of anti-Brucella antibodies in 3 Antarctic pinniped species was undertaken with a protein A/G indirect enzyme-linked immunosorbent assay (iELISA) and the Rose Bengal test (RBT). Serum samples from 33 Weddell seals Leptonychotes weddelli were analysed, and antibodies were detected in 8 individuals (24.2%) with the iELISA and in 21 (65.6%) with the RBT. We tested 48 southern elephant seal Mirounga leonina sera and detected antibodies in 2 animals (4.7%) with both the iELISA and the RBT. None of the 21 Antarctic fur seals Arctocephalus gazella was found positive. This is the first report of anti-Brucella antibodies in southern elephant seals. The potential impact of Brucella infection in pinnipeds in Antarctica is not known, but Brucella spp. are known to cause abortion in terrestrial species and cetaceans. Our findings suggest that Brucella infection in pinnipeds is present in the Antarctic, but to date B. pinnipedialis has not been isolated from any Antarctic pinniped species, leaving the confirmation of infection pending.

  12. Diverse and highly recombinant anelloviruses associated with Weddell seals in Antarctica

    Science.gov (United States)

    Fahsbender, Elizabeth; Kim, Stacy; Kraberger, Simona; Frankfurter, Greg; Eilers, Alice A.; Shero, Michelle R.; Beltran, Roxanne; Kirkham, Amy; McCorkell, Robert; Berngartt, Rachel K.; Male, Maketalena F.; Ballard, Grant; Ainley, David G.; Breitbart, Mya

    2017-01-01

    Abstract The viruses circulating among Antarctic wildlife remain largely unknown. In an effort to identify viruses associated with Weddell seals (Leptonychotes weddellii) inhabiting the Ross Sea, vaginal and nasal swabs, and faecal samples were collected between November 2014 and February 2015. In addition, a Weddell seal kidney and South Polar skua (Stercorarius maccormicki) faeces were opportunistically sampled. Using high throughput sequencing, we identified and recovered 152 anellovirus genomes that share 63–70% genome-wide identities with other pinniped anelloviruses. Genome-wide pairwise comparisons coupled with phylogenetic analysis revealed two novel anellovirus species, tentatively named torque teno Leptonychotes weddellii virus (TTLwV) -1 and -2. TTLwV-1 (n = 133, genomes encompassing 40 genotypes) is highly recombinant, whereas TTLwV-2 (n = 19, genomes encompassing three genotypes) is relatively less recombinant. This study documents ubiquitous TTLwVs among Weddell seals in Antarctica with frequent co-infection by multiple genotypes, however, the role these anelloviruses play in seal health remains unknown. PMID:28744371

  13. Temporal variation in isotopic composition and diet of Weddell seals in the western Ross Sea

    Science.gov (United States)

    Goetz, Kimberly T.; Burns, Jennifer M.; Hückstӓdt, Luis A.; Shero, Michelle R.; Costa, Daniel P.

    2017-06-01

    Weddell seals (Leptonychotes weddellii) are important predators in the Antarctic marine ecosystem, yet little is known about their diet. Previous studies have used scat and stomach content analyses to examine Weddell seal diet, however, these methods are biased towards prey with indigestible hard parts. To provide a more complete picture of their diet, we analyzed the stable isotope composition (δ13C and δ15N values) of red blood cells (RBC, n=96, representing a time scale of weeks to months) and vibrissae (n=45, representing months to a year) collected over a three year period (2010-2012). Our objectives were to (1) examine isotopic variation in relation to Weddell seal mass, sex, season, location, percent lipid, and age, and (2) quantify the contribution of prey items to overall diet. Body mass was a significant predictor of δ13C and δ15N values for both tissues, though the strength and direction of the relationship varied by year. The prey group consisting of Pleurogramma antarcticum and Trematomus newnesi was found to be an important dietary component, but its proportional contribution to Weddell seal diet varied with the timeframe represented by each tissue type [median RBC (range): 59.2% (40.2-8 1.1%); median mean vibrissae (range): 69.3% (43.9-89.6%)]. Results from mixing models ran for each seal indicate individual variation in diet. Overall, this study presents novel information on the isotopic variation and diet of Weddell seals over two time scales and provides insight into the feeding ecology of an important Antarctic predator.

  14. Diel and seasonal patterns of underwater sounds by Weddell seals, leopard seals, and killer whales in the Antarctic: When it's adaptive to be quiet

    Science.gov (United States)

    Mindach, Debrah; Thomas, Jeanette

    2005-09-01

    Automated underwater recordings taken during the austral breeding season of the Weddell seal (Leptonychotes weddellii) in Antarctica also provided data on the vocalizations of predators in the area; leopard seals (Hydrurga leptonyx) and killer whales (Orcinus orca). Weddell seals inhabit fast ice areas to give birth, mate, and molt. Near the end of the breeding season in December the fast ice often breaks out and the two pack ice predators are able to move near the Weddell seal colonies and prey on them, especially pups. Recordings were taken continuously for a 2.5-min period each hour from mid-October 1977 and late-January 1978 at Hutton Cliffs and South Turtle Rock Crack, in McMurdo Sound. The leopard seals increased their trill calls when killer whales came into the area as evidenced by an increase in their frequency-modulated squeak calls. Weddell seals decreased their vocalization rate dramatically (~10 sounds/min) compared to during the peak of the breeding season (~75 sounds/min). Perhaps by being quiet, Weddell seals do not attract predators to their area.

  15. Chemical immobilization of adult female Weddell seals with tiletamine and zolazepam: effects of age, condition and stage of lactation

    Directory of Open Access Journals (Sweden)

    Harcourt Robert G

    2006-02-01

    Full Text Available Abstract Background Chemical immobilization of Weddell seals (Leptonychotes weddellii has previously been, for the most part, problematic and this has been mainly attributed to the type of immobilizing agent used. In addition to individual sensitivity, physiological status may play an important role. We investigated the use of the intravenous administration of a 1:1 mixture of tiletamine and zolazepam (Telazol® to immobilize adult females at different points during a physiologically demanding 5–6 week lactation period. We also compared performance between IV and IM injection of the same mixture. Results The tiletamine:zolazepam mixture administered intravenously was an effective method for immobilization with no fatalities or pronounced apnoeas in 106 procedures; however, there was a 25 % (one animal in four mortality rate with intramuscular administration. Induction time was slightly longer for females at the end of lactation (54.9 ± 2.3 seconds than at post-parturition (48.2 ± 2.9 seconds. In addition, the number of previous captures had a positive effect on induction time. There was no evidence for effects due to age, condition (total body lipid, stage of lactation or number of captures on recovery time. Conclusion We suggest that intravenous administration of tiletamine and zolazepam is an effective and safe immobilizing agent for female Weddell seals. Although individual traits could not explain variation in recovery time, we suggest careful monitoring of recovery times during longitudinal studies (> 2 captures. We show that physiological pressures do not substantially affect response to chemical immobilization with this mixture; however, consideration must be taken for differences that may exist for immobilization of adult males and juveniles. Nevertheless, we recommend a mass-specific dose of 0.50 – 0.65 mg/kg for future procedures with adult female Weddell seals and a starting dose of 0.50 mg/kg for other age classes and other

  16. Density of pack-ice seals and penguins in the western Weddell Sea in relation to ice thickness and ocean depth

    Science.gov (United States)

    Flores, Hauke; Haas, Christian; van Franeker, Jan Andries; Meesters, Erik

    2008-04-01

    Aerial band transect censuses were carried out parallel with ice thickness profiling surveys in the pack ice of the western Weddell Sea during the ISPOL (Ice Station POLarstern) expedition of R.V. Polarstern from November 2004 to January 2005. Three regions were surveyed: the deep sea of the Weddell Sea, a western continental shelf/slope region where R.V. Polarstern passively drifted with an ice floe (ISPOL), and a northern region (N). Animal densities were compared among regions and in relation to bathymetry and ice thickness distribution. Crabeater seals Lobodon carcinophaga were the most abundant species in all three regions. Their density was significantly lower in the deep sea (0.50 km -2) than in the ISPOL (1.00 km -2) and northern regions (1.21 km -2). Weddell seals Leptonychotes weddellii were not sighted in the deep-sea region, their density elsewhere ranging from 0.03 (N) to 0.08 km -2 (ISPOL). Leopard seals Hydrurga leptonyx were observed in all three areas, but could only be quantified in the deep-sea (0.05 km -2) and northern regions (0.06 km -2). The abundance of emperor penguins Aptenodytes forsteri was markedly higher in the northern (0.75 km -2) than in the ISPOL (0.13 km -2) and the deep-sea region (not quantified). Crabeater seal density was significantly related to ocean depth and modal ice thickness.

  17. Energetics of breath-hold hunting: modeling the effects of aging on foraging success in the Weddell seal.

    Science.gov (United States)

    Hindle, Allyson G; Horning, Markus

    2010-06-07

    A simulation model was developed to predict age-related changes in foraging energetics of individual Weddell seals, Leptonychotes weddellii. Aging in diving animals is interesting because their characteristic cyclic sequence of apneustic hunting and eupnea should elevate oxidative stress, possibly accelerating aging. Such a hypothesis can be evaluated by modeling energetics of constrained, time-partitioned activities with well-defined costs. Three possible consequences of physiological aging in divers were specified and appraised. The model examined the potential impacts of age-related decline in muscle contractile ability, increased buoyancy, and reduced aerobic dive limit, alone and in combination, on a daily energy budget. A uniform age effect evident in model outputs is reduced foraging efficiency. The components of this net effect are exacerbated for sub-optimal behavioral-response settings or environmental conditions. The model predicts that with advancing age, efficiency declines increase for aging scenarios in the following order: simulated 'young' adults; 'old' seals with increased buoyancy; 'old' seals with reduced aerobic dive limit; 'old' seals having reduced muscle contractile efficiency; and, 'old' seals with all three conditions. The model indicates narrowed behavioral options to maintain positive energy balance in older animals, suggesting that behavioral plasticity may not allow older animals to compensate for age-related performance constraints. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  18. Heat loss in air of an Antarctic marine mammal, the Weddell seal.

    Science.gov (United States)

    Mellish, Jo-Ann; Hindle, Allyson; Skinner, John; Horning, Markus

    2015-01-01

    The conflicting needs of homeostasis in air versus water complicate our understanding of thermoregulation in marine mammals. Large-scale modeling efforts directed at predicting the energetic impact of changing sea ice conditions on polar ecosystems require a better understanding of thermoregulation in air of free-ranging animals. We utilized infrared imaging as an indirect approach to determine surface temperatures of dry, hauled-out Weddell seals (Leptonychotes weddellii, n = 35) of varying age and body condition during the Antarctic summer. The study groups provided a fivefold range in body mass and a threefold range in blubber depth. Surface temperature (T s) did not vary by body region (head, shoulder, axilla, torso, hip, flippers). Average seal T s (mean 13.9 ± 11.2 °C) was best described through a combination of the physical traits of body mass and environmental variables of ambient temperature T air, and wind speed. Additional factors of ice temperature (T ice), relative humidity and cloud cover did not improve the model. Heat transfer model estimates suggested that radiation contributed 56.6 ± 7.7 % of total heat loss. Convection and conduction accounted for the remaining 15.7 ± 12.3 and 27.7 ± 9.3 %, respectively. Heat loss by radiation was primarily influenced by body mass and wind speed, whereas convective heat loss was influenced primarily by blubber depth and wind speed. Conductive heat loss was modeled largely as a function of physical traits of mass and blubber depth rather than any environmental covariates, and therefore was substantially higher in animals in leaner condition.

  19. Environmental correlates of temporary emigration for female Weddell seals and consequences for recruitment

    Science.gov (United States)

    Stauffer, Glenn E.; Rotella, Jay J.; Garrott, Robert A.; Kendall, William L.

    2014-01-01

    In colonial-breeding species, prebreeders often emigrate temporarily from natal reproductive colonies then subsequently return for one or more years before producing young. Variation in attendance–nonattendance patterns can have implications for subsequent recruitment. We used open robust-design multistate models and 28 years of encounter data for prebreeding female Weddell seals (Leptonychotes weddellii [Lesson]) to evaluate hypotheses about (1) the relationships of temporary emigration (TE) probabilities to environmental and population size covariates and (2) motivations for attendance and consequences of nonattendance for subsequent probability of recruitment to the breeding population. TE probabilities were density dependent (βˆBPOP = 0.66,  = 0.17; estimated effects [β] and standard errors of population size in the previous year) and increased when the fast-ice edge was distant from the breeding colonies (βˆDIST = 0.75,  = 0.04; estimated effects and standard errors of distance to the sea-ice edge in the current year on TE probability in the current year) and were strongly age and state dependent. These results suggest that trade-offs between potential benefits and costs of colony attendance vary annually and might influence motivation to attend colonies. Recruitment probabilities were greatest for seals that consistently attended colonies in two or more years (e.g.,  = 0.56, SD = 0.17) and lowest for seals that never or inconsistently attended prior to recruitment (e.g.,  = 0.32, SD = 0.15), where denotes the mean recruitment probability (over all years) for 10-year-old seals for the specified prebreeder state. In colonial-breeding seabirds, repeated colony attendance increases subsequent probability of recruitment to the adult breeding population; our results suggest similar implications for a marine mammal and are consistent with the hypothesis that prebreeders were motivated to attend reproductive colonies to gain reproductive skills or

  20. Coping with the loss of large, energy-dense prey: a potential bottleneck for Weddell Seals in the Ross Sea.

    Science.gov (United States)

    Salas, Leo; Nur, Nadav; Ainley, David; Burns, Jennifer; Rotella, Jay; Ballard, Grant

    2017-01-01

    Extraction of Antarctic toothfish (Dissostichus mawsoni) in the Ross Sea began in 1997, following a management plan that targets the largest fish with a goal of reducing the spawning biomass by 50% over 35 yr. We investigate the potential long-term consequences of the reduced availability of this prey for Weddell seals (Leptonychotes weddellii). Energy demands in seals are acute, especially immediately following lactation, when females must recover substantial mass and cope with molting costs. We tested the hypothesis that toothfish are critically important for adult female seals during this period. Toothfish body mass is three orders of magnitude greater, and its energy density nearly double that of the most common seal prey, Antarctic silverfish (Pleuragramma antarcticum). Reduction or elimination of toothfish consumption could impair a female's ability to sufficiently recover and successfully produce a pup in the following pupping season. Our goals are to (1) illustrate mechanisms and conditions whereby toothfish depletion might plausibly affect seal population trends; (2) identify measurable parameters of the seals' ecology that may help better understand the potential negative impact of toothfish depletion on seal populations; and (3) promote a precautionary management approach for the fishery that includes monitoring of seal populations We constructed a set of inter-linked models of seal diving behavior, physiological condition, and demography based on existing information. We evaluate the effect of the following factors on seal mass recovery and intrinsic population growth rates: fishery depletion rate, daily diving limits, probability of a successful dive, and body mass recovery target. We show that loss of toothfish has the greatest potential impact on seal populations' growth rate. Under some scenarios, populations may decrease at >10% per year. Critical parameters to better understand fishery impacts include prevalence and size of toothfish in the seals

  1. Isolation and characterization of Campylobacter spp. from Antarctic fur seals (Arctocephalus gazella) at Deception Island, Antarctica.

    Science.gov (United States)

    García-Peña, F J; Pérez-Boto, D; Jiménez, C; San Miguel, E; Echeita, A; Rengifo-Herrera, C; García-Párraga, D; Ortega-Mora, L M; Pedraza-Díaz, S

    2010-09-01

    The presence of Campylobacter spp. was investigated in 41 Antarctic fur seals (Arctocephalus gazella) and 9 Weddell seals (Leptonychotes weddellii) at Deception Island, Antarctica. Infections were encountered in six Antarctic fur seals. The isolates, the first reported from marine mammals in the Antarctic region, were identified as Campylobacter insulaenigrae and Campylobacter lari.

  2. Aerial surveys for pack-ice seals along the Ingrid Christensen and Princess Astrid Coasts, East Antarctica

    OpenAIRE

    R.S. Kumar; J.A. Johnson

    2014-01-01

    We conducted aerial surveys in the austral summer of 2009-2010 to count and record the spatial distribution patterns of pack-ice seals hauled-out along the Ingrid Christensen and Princess Astrid coast of East Antarctica. A total of 3,601 hauled-out seals were counted from six aerial surveys totalling a length of approx. 1,200km, with each survey lasting about two hours. Weddell Seal Leptonychotes weddellii was the most commonly sighted species in both the areas surveyed (98.2%), and had an en...

  3. Aerial surveys for pack-ice seals along the Ingrid Christensen and Princess Astrid Coasts, East Antarctica

    Directory of Open Access Journals (Sweden)

    R.S. Kumar

    2014-08-01

    Full Text Available We conducted aerial surveys in the austral summer of 2009-2010 to count and record the spatial distribution patterns of pack-ice seals hauled-out along the Ingrid Christensen and Princess Astrid coast of East Antarctica. A total of 3,601 hauled-out seals were counted from six aerial surveys totalling a length of approx. 1,200km, with each survey lasting about two hours. Weddell Seal Leptonychotes weddellii was the most commonly sighted species in both the areas surveyed (98.2%, and had an encounter rate of 2.9 seals/km. The other species encountered during the survey were Crabeater Seal Lobodon carcinophaga (1.7% and Leopard Seal Hydrurga leptonyx (0.03%. Group size of hauled-out Weddell Seals varied considerably and ranged from solitary to maximum of 42 individuals. The median group size of Weddell seals hauled-out along the Ingrid Christenson Coast was found to be significantly different between the December 2009 and January 2010 survey. Further, along this coast Weddell Seals were found hauled-out mainly close to the ice shelf and their spatial distribution appeared to be influenced by the extent of sea ice in the area.

  4. Effects of hydrographic variability on the spatial, seasonal and diel diving patterns of southern elephant seals in the eastern Weddell Sea.

    Directory of Open Access Journals (Sweden)

    Martin Biuw

    Full Text Available Weddell Sea hydrography and circulation is driven by influx of Circumpolar Deep Water (CDW from the Antarctic Circumpolar Current (ACC at its eastern margin. Entrainment and upwelling of this high-nutrient, oxygen-depleted water mass within the Weddell Gyre also supports the mesopelagic ecosystem within the gyre and the rich benthic community along the Antarctic shelf. We used Conductivity-Temperature-Depth Satellite Relay Data Loggers (CTD-SRDLs to examine the importance of hydrographic variability, ice cover and season on the movements and diving behavior of southern elephant seals in the eastern Weddell Sea region during their overwinter feeding trips from Bouvetøya. We developed a model describing diving depth as a function of local time of day to account for diel variation in diving behavior. Seals feeding in pelagic ice-free waters during the summer months displayed clear diel variation, with daytime dives reaching 500-1500 m and night-time targeting of the subsurface temperature and salinity maxima characteristic of CDW around 150-300 meters. This pattern was especially clear in the Weddell Cold and Warm Regimes within the gyre, occurred in the ACC, but was absent at the Dronning Maud Land shelf region where seals fed benthically. Diel variation was almost absent in pelagic feeding areas covered by winter sea ice, where seals targeted deep layers around 500-700 meters. Thus, elephant seals appear to switch between feeding strategies when moving between oceanic regimes or in response to seasonal environmental conditions. While they are on the shelf, they exploit the locally-rich benthic ecosystem, while diel patterns in pelagic waters in summer are probably a response to strong vertical migration patterns within the copepod-based pelagic food web. Behavioral flexibility that permits such switching between different feeding strategies may have important consequences regarding the potential for southern elephant seals to adapt to

  5. Aerobic dive limits of seals with mutant myoglobin using combined thermochemical and physiological data

    DEFF Research Database (Denmark)

    Dasmeh, Pouria; Davis, Randall W.; Kepp, Kasper Planeta

    2013-01-01

    This paper presents an integrated model of convective O2-transport, aerobic dive limits (ADL), and thermochemical data for oxygen binding to mutant myoglobin (Mb), used to quantify the impact of mutations in Mb on the dive limits of Weddell seals (Leptonychotes weddellii). We find that wild-type Mb...... traits are only superior under specific behavioral and physiological conditions that critically prolong the ADL, action radius, and fitness of the seals. As an extreme example, the mutations in the conserved His-64 reduce ADL up to 14±2 min for routine aerobic dives, whereas many other mutations...

  6. Some anatomical aspects of the cardiovascular system of Antarctic seals and their possible functional significance in diving.

    Science.gov (United States)

    Drabek, C M

    1975-01-01

    The hearts and ascending aortae of 11 Weddell seals, Leptonychotes weddelli, three adult Crabeater seals, Lobodon carcinophagus, two adult Ross seals, Ommatophoca rossi, and one adult Leopard seal, Hydrurga leptonyx, were examined for comparison with terrestrial forms. The Weddell seal specimens were from animals ranging in age from midterm in fetal development to mature adults. All specimens were collected in 1971, 1972, and 1973, from McMurdo Sound and the Ross Sea, Antarctica. The phocid hearts were characteristically broader and flatter than those of other carnivore families and they tended toward bifid apices. The heart form indices (height/circumference) averaged 31.5 compared to 39.0 for felids. The right ventricular chambers of the Antarctic seals were found to average longer in Weddells and narrower in all, than those reported for four other carnivore families. An elastic enlargement was present in the ascending aortae of all seals. The largest diameter of the aortic bulb averaged 25.5 mm more than the base of the aorta in the adult Weddell seals which represented an increase of 72.5% over the base. It is suggested that the general heart form, and especially the ascending aortae, are anatomical adaptations to diving. The compressed heart makes possible unimpaired function when the chest is compressed during deep dives. The aortic bulb maintains mean arterial blood pressure and perfusion of the brain and cardiac tissue during diving bradycardia.

  7. Evaluating the demographic buffering hypothesis with vital rates estimated for Weddell seals from 30years of mark-recapture data

    Science.gov (United States)

    Rotella, J.J.; Link, W.A.; Chambert, T.; Stauffer, G.E.; Garrott, R.A.

    2012-01-01

    1.Life-history theory predicts that those vital rates that make larger contributions to population growth rate ought to be more strongly buffered against environmental variability than are those that are less important. Despite the importance of the theory for predicting demographic responses to changes in the environment, it is not yet known how pervasive demographic buffering is in animal populations because the validity of most existing studies has been called into question because of methodological deficiencies. 2.We tested for demographic buffering in the southern-most breeding mammal population in the world using data collected from 5558 known-age female Weddell seals over 30years. We first estimated all vital rates simultaneously with mark-recapture analysis and then estimated process variance and covariance in those rates using a hierarchical Bayesian approach. We next calculated the population growth rate's sensitivity to changes in each of the vital rates and tested for evidence of demographic buffering by comparing properly scaled values of sensitivity and process variance in vital rates. 3.We found evidence of positive process covariance between vital rates, which indicates that all vital rates are affected in the same direction by changes in annual environment. Despite the positive correlations, we found strong evidence that demographic buffering occurred through reductions in variation in the vital rates to which population growth rate was most sensitive. Process variation in vital rates was inversely related to sensitivity measures such that variation was greatest in breeding probabilities, intermediate for survival rates of young animals and lowest for survival rates of older animals. 4.Our work contributes to a small but growing set of studies that have used rigorous methods on long-term, detailed data to investigate demographic responses to environmental variation. The information from these studies improves our understanding of life

  8. 76 FR 70421 - Marine Mammals; File No. 87-1851

    Science.gov (United States)

    2011-11-14

    ... amendment to Permit No. 87-1851-03 to conduct research on Weddell seals (Leptonychotes weddellii) had been..., and sampling of 35 Weddell seals, and ] weighing 35 Weddell seal nursing pups, during 2012. The...

  9. Occurrence of microbial indicators and Clostridium perfringens in wastewater, water column samples, sediments, drinking water, and Weddell seal feces collected at McMurdo Station, Antarctica

    Science.gov (United States)

    Lisle, J.T.; Smith, J.J.; Edwards, D.D.; McFeters, G.A.

    2004-01-01

    McMurdo Station, Antarctica, has discharged untreated sewage into McMurdo Sound for decades. Previous studies delineated the impacted area, which included the drinking water intake, by using total coliform and Clostridium perfringens concentrations. The estimation of risk to humans in contact with the impacted and potable waters may be greater than presumed, as these microbial indicators may not be the most appropriate for this environment. To address these concerns, concentrations of these and additional indicators (fecal coliforms, Escherichia coli, enterococci, coliphage, and enteroviruses) in the untreated wastewater, water column, and sediments of the impacted area and drinking water treatment facility and distribution system at McMurdo Station were determined. Fecal samples from Weddell seals in this area were also collected and analyzed for indicators. All drinking water samples were negative for indicators except for a single total coliform-positive sample. Total coliforms were present in water column samples at higher concentrations than other indicators. Fecal coliform and enterococcus concentrations were similar to each other and greater than those of other indicators in sediment samples closer to the discharge site. C. perfringens concentrations were higher in sediments at greater distances from the discharge site. Seal fecal samples contained concentrations of fecal coliforms, E. coli, enterococci, and C. perfringens similar to those found in untreated sewage. All samples were negative for enteroviruses. A wastewater treatment facility at McMurdo Station has started operation, and these data provide a baseline data set for monitoring the recovery of the impacted area. The contribution of seal feces to indicator concentrations in this area should be considered.

  10. Density of pack-ice seals and penguins in the western Weddell Sea in relation to ice thickness and ocean depth

    NARCIS (Netherlands)

    Florentino De Souza Silva, A.P.; Haas, C.; Franeker, van J.A.; Meesters, H.W.G.

    2008-01-01

    Aerial band transect censuses were carried out parallel with ice thickness profiling surveys in the pack ice of the western Weddell Sea during the ISPOL (Ice Station POLarstern) expedition of R.V. Polarstern from November 2004 to January 2005. Three regions were surveyed: the deep sea of the Weddell

  11. 76 FR 59663 - Marine Mammals; File No. 16472

    Science.gov (United States)

    2011-09-27

    ... (76 FR 43266) that a request for a permit to conduct research on Antarctic fur seals (Arctocephalus gazella), southern elephant seals (Mirounga leonina), crabeater seals (Lobodon carcinophagus), leopard seals (Hydrurga leptonyx), Ross seals (Ommatophoca rossii), and Weddell seals (Leptonychotes weddellii...

  12. Distribution and coassociations of selected metals in seals of the Antarctic.

    Science.gov (United States)

    Szefer, P; Szefer, K; Pempkowiak, J; Skwarzec, B; Bojanowski, R; Holm, E

    1994-01-01

    Zinc, Cu, Cd, Pb, Ag, Ni, Co, Cr, Fe and Mn concentrations in some tissues of crabeater seal (Lobodon carcinophagus), leopard seal (Hydrurga leptonyx) and Weddell seal (Leptonychotes weddelli) from the Antarctic were determined. Distinct inter-tissue differences in metal concentrations in seals were observed; liver contained maximum levels of Zn, Cu, Ag and Mn, whilst kidney showed the highest levels of Cd, Ni and Co. Muscle was characterized by low concentrations of all the elements analyzed. The metal concentrations in the vertebrates analyzed were compared with those for organisms originating from various aquatic areas. Significant correlations were found between the levels of several of the metals analyzed, e.g. between renal and hepatic concentrations of Zn and Cd. Strong relationships between the hepatic concentrations of some metals were found, e.g. Cd-Zn. These two metals also showed a significant coassociation in their renal concentrations. The slope of the regression line for renal Cd/Zn was about three times higher than the hepatic one and this may reflect a relatively high Cd exposure, probably from specific food (squid and krill) provenance, of the seals analyzed.

  13. Shifts in Ross Sea food web structure as indicated by δ15N and δ13C values of fossil Antarctic seals

    Science.gov (United States)

    Leopold, A.; Brault, E.; McMahon, K.

    2013-12-01

    As climate change continues to mount, there is a growing need for understanding its effects on biological-physical interactions of marine ecosystems. Assessing the effects of anthropogenic activities on the coastal marine ecosystem involves understanding the underlying mechanisms driving these changes as well as establishing baselines of the natural system. Preliminary findings have indicated shifts in bulk carbon (C) and nitrogen (N) isotopic values of southern elephant seal (Mirounga leonina) samples, collected in the Dry Valleys of Antarctica in the Ross Sea region, over approximately the last 7,000 years. These shifts could result from 1) seals changing their foraging location and/or diet over this time, 2) climate change-induced shifts in the biogeochemistry at the base of the food web, or 3) some combination of both processes. We explored the patterns of long-term change in Ross Sea food web structure by examining the stable isotope values of three top predators in this system, Weddell seals (Leptonychotes weddellii), leopard seals (Hydrurga leptonyx), and crabeater seals (Lobodon carcinophagus). Fossil seal samples were collected in the Dry Valleys during the austral summer of 2012/13 and then analyzed for bulk C and N isotopes via an elemental analyzer/isotope-ratio mass spectrometer (EA/IRMS). Our initial findings indicate that C isotopic values of fossil seal samples from Weddell, leopard, and crabeater seals were more enriched than isotopic values of modern seals of the same species (e.g., δ13C = -22.79 × 0.92 ‰ and -26.71 × 0.50 ‰ for fossil and modern crabeater seals, respectively). Given the relatively consistent diet of crabeater seals, these findings suggest a shift in baseline food web structure occurred over the last 10,000 years, either through changes in foraging location or local shifts in biogeochemistry. For all species, N isotopic values are widely variable (e.g., 7.28 to 16.0 δ15N ‰ for the Weddell seal), which may be a result of

  14. 77 FR 34352 - Marine Mammals; File No. 17178

    Science.gov (United States)

    2012-06-11

    ... fur, blood, and fat biopsies from up to 300 crabeater seals (Lobodon carcinophaga), 200 Weddell seals (Leptonychotes weddellii), 50 Ross seals (Ommatophoca Rossii), and 25 leopard seals (Hydrurga leptonyx). No takes...

  15. 76 FR 43266 - Marine Mammals; File No. 16472

    Science.gov (United States)

    2011-07-20

    ...), leopard seals (Hydrurga leptonyx), Ross seals (Ommatophoca rossii), and Weddell seals (Leptonychotes... pups; 50 leopard seal adults and juveniles; 50 southern elephant seal adults and juveniles; 100... leopard seals, 200 Weddell seals, and 5 Ross seals would be taken annually by harassment during aerial and...

  16. Mercury and major essential elements in seals, penguins, and other representative fauna of the Antarctic.

    Science.gov (United States)

    Szefer, P; Czarnowski, W; Pempkowiak, J; Holm, E

    1993-11-01

    Concentrations of total Hg and major essential elements, Ca, Mg, Na, and K, were measured in the muscle, liver, and kidney of three species of seals, crabeater seal (Lobodon carcinophagus), leopard seal (Hydrurga leptonyx), and Weddell seal (Leptonychotes weddelli) collected in the Antarctic. The muscle and liver of three species of penguins, i.e., gentoo penguin (Pygoscelis papua), Adelie penguin (P. adeliae), chinstrap penguin (P. antarctica), and other representative fauna were also analyzed for the elements. Distinct inter-tissue differences in the metal concentration were observed; liver had the greatest concentrations of Hg, kidney showed maximum concentration of Ca and Na, while muscle was characterized by the greatest content of Mg and K. Inter-specimen differentiation of concentrations among the same species was distinctly visualized for Hg but not for the major essential elements. The Hg concentration in the seals analyzed are in keeping with those reported previously by other authors. Such comparison for Ca, Mg, Na, and K was impossible because of the lack of available literature data for their concentrations in marine seals. Numerous significant correlations were observed between concentrations of the several metals analyzed. There was no correlation between Hg, which is a non-essential element and both Zn and Cd which are essential and non-essential elements, respectively in the liver or kidney of seals. However, there were significant correlations between concentration of Zn and the sum of molar concentrations of Hg+Cd in kidney (r = 0.82) and liver (r = 0.76). The results suggest that several control mechanisms operate to maintain physiologically required levels that decreases any effect of heavy metal toxicants such as Hg and Cd.

  17. 77 FR 32081 - Marine Mammals; File No. 17236

    Science.gov (United States)

    2012-05-31

    ...,000 Weddell, 50 crabeater (Lobodon carcinophagus), and 50 leopard (Hydrurga leptonyx) seals may be... permit to conduct research on Weddell seals (Leptonychotes weddellii). DATES: Written, telefaxed, or... variability and individual heterogeneity affects the population dynamics of Weddell seals in the Antarctic...

  18. 76 FR 28421 - Marine Mammals; File No. 15646

    Science.gov (United States)

    2011-05-17

    ... 300 crabeater seals (Lobodon carcinophaga), 200 Weddell seals (Leptonychotes weddellii), 50 Ross seals (Ommatophoca Rossii), 25 leopard seals (Hydrurga leptonyx), and 20 killer whales (Orcinus orca) that were... the dietary preferences and feeding ecology of Antarctic marine mammals by analyzing seal and whale...

  19. 77 FR 19646 - Marine Mammals; File No. 17178

    Science.gov (United States)

    2012-04-02

    ... biopsies from up to 300 crabeater seals (Lobodon carcinophaga), 200 Weddell seals (Leptonychotes weddellii), 50 Ross seals (Ommatophoca Rossii), and 25 leopard seals (Hydrurga leptonyx) that were collected in... analyzing seal and whale samples for persistent organic pollutants, mercury, and stable isotopes. The...

  20. Weddell Sea exploration from ice station

    Science.gov (United States)

    Ice Station Weddell Group of Principal Investigators; Chief Scientists; Gordon, Arnold L.

    On January 18, 1915, the Endurance and Sir Ernest Shackleton and his crew were stranded in the ice of the Weddell Sea and began one of the most famous drifts in polar exploration. Shackleton turned a failure into a triumph by leading all of his team to safety [Shackleton, 1919]. The drift track of the Endurance and the ice floe occupied by her stranded crew after the ship was lost on November 21, 1915, at 68°38.5‧S and 52°26.5‧W, carried the group along the western rim of the Weddell Gyre, representing a rare human presence in this region of perennial sea-ice cover.Seventy-seven years later, in 1992, the first intentional scientific Southern Ocean ice drift station, Ice Station Weddell-1 (ISW-1), was established in the western Weddell Sea by a joint effort of the United States and Russia. ISW-1 followed the track of the Endurance closely (Figure 1) and gathered an impressive array of data in this largely unexplored corner of the Southern Ocean, the western edge of the Weddell Gyre.

  1. Transport and structure of the Weddell Gyre

    Directory of Open Access Journals (Sweden)

    E. Fahrbach

    1994-08-01

    Full Text Available A cyclonic gyre controls the advection of source waters into the formation areas of bottom water in the southern and western parts of the Weddell Sea and the subsequent transport of modified water masses to the north. Determination of the structure of the Weddell Gyre and of the associated transports was one of the objectives of the "Weddell Gyre Study" which began in September 1989 and ended in January 1993. The collected data set comprises records of moored current meters and profiles of temperature and salinity distributed along a transect between the northern tip of the Antarctic Peninsula and Kapp Norvegia. The circulation pattern on the transect is dominated by stable boundary currents of several hundred kilometers width at the eastern and western sides of the basin. They are of comparable size on both sides and provide nearly 90% of the volume transport of the gyre which amounts to 29.5 Sv. In the interior, a weak anticyclonic cell of 800 km diameter transports less than 4 Sv. Apart from the continental slopes, the near-bottom currents flow at some locations in an opposite direction to those in the water column above, indicating a significant baroclinic component of the current field. The intensity of the boundary currents is subject to seasonal fluctuations, whereas in the interior, time scales from days to weeks dominate. The large-scale circulation pattern is persistent during the years 1989 to 1991. The heat transport into the southern Weddell Sea is estimated to be 3.48×1013 W. This implies an equivalent heat loss through the sea surface of 19 W m-2, as an average value for the area south of the transect. The derived salt transport is not significantly different from zero; consequently, the salt gain by sea ice formation has to compensate almost entirely the fresh water gain from the melting ice shelves and from precipitation. Estimation of water mass formation rates from the thermohaline differences of the inflow and outflow

  2. Transport and structure of the Weddell Gyre

    Directory of Open Access Journals (Sweden)

    E. Fahrbach

    Full Text Available A cyclonic gyre controls the advection of source waters into the formation areas of bottom water in the southern and western parts of the Weddell Sea and the subsequent transport of modified water masses to the north. Determination of the structure of the Weddell Gyre and of the associated transports was one of the objectives of the "Weddell Gyre Study" which began in September 1989 and ended in January 1993. The collected data set comprises records of moored current meters and profiles of temperature and salinity distributed along a transect between the northern tip of the Antarctic Peninsula and Kapp Norvegia. The circulation pattern on the transect is dominated by stable boundary currents of several hundred kilometers width at the eastern and western sides of the basin. They are of comparable size on both sides and provide nearly 90% of the volume transport of the gyre which amounts to 29.5 Sv. In the interior, a weak anticyclonic cell of 800 km diameter transports less than 4 Sv. Apart from the continental slopes, the near-bottom currents flow at some locations in an opposite direction to those in the water column above, indicating a significant baroclinic component of the current field. The intensity of the boundary currents is subject to seasonal fluctuations, whereas in the interior, time scales from days to weeks dominate. The large-scale circulation pattern is persistent during the years 1989 to 1991. The heat transport into the southern Weddell Sea is estimated to be 3.48×1013 W. This implies an equivalent heat loss through the sea surface of 19 W m-2, as an average value for the area south of the transect. The derived salt transport is not significantly different from zero; consequently, the salt gain by sea ice formation has to compensate almost entirely the fresh water gain from the melting ice shelves and from precipitation. Estimation of water mass formation rates from the thermohaline differences of the

  3. Population structure of ice-breeding seals.

    Science.gov (United States)

    Davis, Corey S; Stirling, Ian; Strobeck, Curtis; Coltman, David W

    2008-07-01

    The development of population genetic structure in ice-breeding seal species is likely to be shaped by a combination of breeding habitat and life-history characteristics. Species that return to breed on predictable fast-ice locations are more likely to exhibit natal fidelity than pack-ice-breeding species, which in turn facilitates the development of genetic differentiation between subpopulations. Other aspects of life history such as geographically distinct vocalizations, female gregariousness, and the potential for polygynous breeding may also facilitate population structure. Based on these factors, we predicted that fast-ice-breeding seal species (the Weddell and ringed seal) would show elevated genetic differentiation compared to pack-ice-breeding species (the leopard, Ross, crabeater and bearded seals). We tested this prediction using microsatellite analysis to examine population structure of these six ice-breeding species. Our results did not support this prediction. While none of the Antarctic pack-ice species showed statistically significant population structure, the bearded seal of the Arctic pack ice showed strong differentiation between subpopulations. Again in contrast, the fast-ice-breeding Weddell seal of the Antarctic showed clear evidence for genetic differentiation while the ringed seal, breeding in similar habitat in the Arctic, did not. These results suggest that the development of population structure in ice-breeding phocid seals is a more complex outcome of the interplay of phylogenetic and ecological factors than can be predicted on the basis of breeding substrate and life-history characteristics.

  4. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2014-01-01

    Seals and Sealing Handbook, 6th Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices. Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failur

  5. AWI Moored ULS Data, Weddell Sea (1990-1998)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of moored Upward Looking Sonar (ULS) data from 14 stations in the Weddell Sea. Parameters in the processed data files are water pressure,...

  6. Physical and structural characteristics of Weddell Sea pack ice

    National Research Council Canada - National Science Library

    Gow, A.J; Ackley, S.F; Buck, K.R; Golden, K.M

    1987-01-01

    Recent studies by CRREL researchers of the dynamics and thermodynamics of sea ice in the Antarctic have included investigations of the physical and structural properties of pack ice in the Weddell Sea...

  7. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2007-01-01

    Wherever machinery operates there will be seals of some kind ensuring that the machine remains lubricated, the fluid being pumped does not leak, or the gas does not enter the atmosphere. Seals are ubiquitous, in industry, the home, transport and many other places. This 5th edition of a long-established title covers all types of seal by application: static, rotary, reciprocating etc. The book bears little resemblance to its predecessors, and Robert Flitney has re-planned and re-written every aspect of the subject. No engineer, designer or manufacturer of seals can afford to be without this uniq

  8. Role of Weddell Sea ice variability in southern African climate

    Science.gov (United States)

    Morioka, Y.; Engelbrecht, F.; Behera, S. K.

    2016-12-01

    A role of interannual sea ice variability in the Weddell Sea on southern African climate is investigated by conducting data analysis and coupled general circulation model (CGCM) experiments. The Weddell Sea ice exhibits a distinct interannual variability during austral summer when the southern African rainfall experiences most of its annual rainfall. The sea ice concentration (SIC) in the Weddell Sea shows a significantly negative correlation with the southern African rainfall during early summer (Nov-Jan). The low SIC anomaly in the Weddell Sea is associated with anticyclonic atmospheric circulation anomalies in the South Atlantic and southern Indian Oceans, which facilitates more moisture advection from the southern Indian Ocean. Composite analysis reveals that the low SIC anomaly in the Weddell Sea is attributed to the increased solar radiation and the northwesterly wind anomaly. This low SIC anomaly, in turn, acts to cause warmer skin temperature and reduce the meridional temperature gradient to the north. This is a favoring condition for sustaining the anticyclonic circulation anomaly in the South Atlantic by enhancing the near-surface atmospheric stability. This intriguing association between the SIC and atmospheric circulation anomalies is also simulated in a series of CGCM experiment, e.g. where the interannual sea surface temperature (SST) variability in the tropics and midlatitudes is suppressed by the monthly climatology of the model. However, in the absence of interannual SST variability over global oceans, the simulated SIC anomaly is much smaller in association with the atmospheric internal variability, called the Southern Annular Mode. These CGCM results suggest that the air-sea-ice interaction in the Weddell Sea has potential impact on the overlying atmosphere in the South Atlantic, which is important for the southern African climate.

  9. Glass sealing

    Energy Technology Data Exchange (ETDEWEB)

    Brow, R.K.; Kovacic, L.; Chambers, R.S. [Sandia National Labs., Albuquerque, NM (United States)

    1996-04-01

    Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

  10. Mechanical seals

    CERN Document Server

    Mayer, E

    1977-01-01

    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and c

  11. Albedo of the ice covered Weddell and Bellingshausen Seas

    Directory of Open Access Journals (Sweden)

    A. I. Weiss

    2012-04-01

    Full Text Available This study investigates the surface albedo of the sea ice areas adjacent to the Antarctic Peninsula during the austral summer. Aircraft measurements of the surface albedo, which were conducted in the sea ice areas of the Weddell and Bellingshausen Seas show significant differences between these two regions. The averaged surface albedo varied between 0.13 and 0.81. The ice cover of the Bellingshausen Sea consisted mainly of first year ice and the sea surface showed an averaged sea ice albedo of αi = 0.64 ± 0.2 (± standard deviation. The mean sea ice albedo of the pack ice area in the western Weddell Sea was αi = 0.75 ± 0.05. In the southern Weddell Sea, where new, young sea ice prevailed, a mean albedo value of αi = 0.38 ± 0.08 was observed. Relatively warm open water and thin, newly formed ice had the lowest albedo values, whereas relatively cold and snow covered pack ice had the highest albedo values. All sea ice areas consisted of a mixture of a large range of different sea ice types. An investigation of commonly used parameterizations of albedo as a function of surface temperature in the Weddell and Bellingshausen Sea ice areas showed that the albedo parameterizations do not work well for areas with new, young ice.

  12. Albedo of the ice-covered Weddell and Bellingshausen Sea

    OpenAIRE

    Weiss, A.I.; King, J C; T. A. Lachlan-Cope; Ladkin, R. S.

    2011-01-01

    This study investigates the surface albedo of the sea ice areas adjacent to the Antarctic Peninsula during the austral summer. Aircraft measurements of the surface albedo which were conducted in the sea ice areas of the Weddell and Bellingshausen Sea show significant differences between these two regions. The averaged surface albedo varied between 0.13 and 0.81. The ice cover of the Bellingshausen Sea consisted mainly of first year ice and the sea surface showed an averaged sea ice albed...

  13. Sea ice ridging in the eastern Weddell Sea

    Science.gov (United States)

    Lytle, V. I.; Ackley, S. F.

    1991-10-01

    In August 1986, sea ice ridge heights and spatial frequency in the eastern Weddell Sea were measured using a ship-based acoustical sounder. Using a minimum ridge sail height of 0.75 m, a total of 933 ridges were measured along a track length of 415 km. The ridge frequency varied from 0.4 to 10.5 ridges km-1. The mean height of the ridges was found to be about 1.1 m regardless of the ridge frequency. These results are compared to other ridging statistics from the Ross Sea and found to be similar. Comparison with Arctic data, however, indicates that the height and frequency of the ridges are considerably less in the Weddell Sea than in the Arctic. Whereas in the Arctic the mean ridge height tends to increase with the ridge frequency, we found that this was not the case in the Weddell Sea, where the mean ridge height remained constant irrespective of the ridge frequency. Estimates of the contribution of deformed ice to the total ice thickness are generally low except for a single 53-km section where the ridge frequency increased by an order of magnitude. This resulted in an increase in the equivalent mean ice thickness due to ridging from 0.04 m in the less deformed areas to 0.45 m in the highly deformed section. These values were found to be consistent with values obtained from drilled profile lines during the same cruise.

  14. Numerical simulation of the Weddell Sea pack ice

    Science.gov (United States)

    Hibler, W. D., III; Ackley, S. F.

    1983-01-01

    In order to determine the degree to which a coupled dynamic thermodynamic model can reproduce the seasonal cycle of the Antarctic Sea ice in the Weddell Sea, a series of two-year simulations of the Weddell Sea ice pack were carried out. The simulations employed Hibler's (1979) model and used a one-day time step on an 18 x 15 grid with a resolution of 222 km. Daily atmospheric data from 1979 were used to drive the simulations. The simulations yielded a seasonal cycle of ice with maximum and minimum extents close to that observed. Except for portions of the western Weddell, the advance of the ice is found to be primarily thermodynamic in nature, while the rapid decay depends critically on the presence of both leads and lateral ice advection. In early summer the ice motion causes a residual tongue of ice to extend eastward from the Antarctic Peninsula in agreement with observations. Mean ice thicknesses are consistent with observations, as are the mean drift rates of about 5 km/day.

  15. Carbonate Chemistry of the Weddell Sea from 10/9/1981 - 11/25/1981 (NODC Accession 0000121)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Carbonate data for the Weddell sea are provided from both surface samples taken along the cruise track of the US-USSR Weddell Polynya Expedition (WEPOLEX-81) and...

  16. Dissolved Fe across the Weddell Sea and Drake Passage: impact of DFe on nutrient uptake

    NARCIS (Netherlands)

    Klunder, M.B.; Laan, P.; de Baar, H.J.W.; Middag, R.; Neven, I.; Van Ooijen, J.

    2014-01-01

    This manuscript reports the first full depth distributions of dissolved iron (DFe) over a high-resolution Weddell Sea and Drake Passage transect. Very low dissolved DFe concentrations (0.01-0.1 nM range) were observed in the surface waters of the Weddell Sea, and within the Drake Passage polar

  17. Dissolved Fe across the Weddell Sea and Drake Passage : Impact of DFe on nutrient uptake

    NARCIS (Netherlands)

    Klunder, M. B.; Laan, P.; De Baar, H. J. W.; Middag, R.; Neven, I.; Van Ooijen, J.

    2014-01-01

    This manuscript reports the first full depth distributions of dissolved iron (DFe) over a high-resolution Weddell Sea and Drake Passage transect. Very low dissolved DFe concentrations (0.01-0.1 nM range) were observed in the surface waters of the Weddell Sea, and within the Drake Passage polar

  18. Body and blubber relationships in antarctic pack ice seals: implications for blubber depth patterns.

    Science.gov (United States)

    Castellini, M A; Trumble, S J; Mau, T L; Yochem, P K; Stewart, B S; Koski, M A

    2009-01-01

    Morphometrics and blubber depths from all four high Antarctic seals (Weddell, Ross, crabeater, and leopard) were obtained during a midsummer research cruise in the Ross Sea as the physiological ecology component of the U.S. Antarctic Pack Ice Seals project. These data are the only in vivo measurements of all four species from the same location and time of year and focused on variances in morphometrics and blubber depth related to species, sex, and age. By controlling for location and season, this cross-species design provided the means to differentiate how blubber mass might be influenced in these groups. We measured both absolute blubber depth and ratio of blubber depth to body core diameter. We found that adult and younger animals showed differences in blubber depth, but male versus female seals did not show differences within any given species. However, when compared across species, the ratio of blubber ring depth to body core diameter suggests that adult Weddell seals differ in their use of blubber compared with the other three species. We propose that this difference in blubber pattern is most likely related to Weddell nutritional requirements during the breeding season having a greater influence on blubber depth than thermal requirements when compared with the other three species.

  19. Albedo of the ice covered Weddell and Bellingshausen Seas

    OpenAIRE

    Weiss, A.I.; King, J C; T. A. Lachlan-Cope; Ladkin, R. S.

    2012-01-01

    This study investigates the surface albedo of the sea ice areas adjacent to the Antarctic Peninsula during the austral summer. Aircraft measurements of the surface albedo, which were conducted in the sea ice areas of the Weddell and Bellingshausen Seas show significant differences between these two regions. The averaged surface albedo varied between 0.13 and 0.81. The ice cover of the Bellingshausen Sea consisted mainly of first year ice and the sea surface showed an averaged sea ice albedo o...

  20. Weddell Sea ice drift: Kinematics and wind forcing

    Science.gov (United States)

    Vihma, Timo; Launiainen, Jouko; Uotila, Juha

    1996-08-01

    Ice drift in the Weddell Sea was studied on the basis of positional and meteorological data from Argos buoys drifting in 1990-1992 and surface pressure analyses from the European Centre for Medium Range Weather Forecasts (ECMWF). The drift kinematics showed differences between the eastern and western parts of the Weddell Sea. Close to the Antarctic Peninsula, the ice drifted as an almost nonrotating uniform field at a low speed, having reduced small-scale motions with little meandering, compared to regions further to the east. Inertial motion was detected from the ice drift in areas east of 35°W and in the region of the Antarctic Circumpolar Current. On timescales of days, wind was the primary forcing factor for the drift. A linear model between the wind and ice drift explained 40-80% of the drift velocity variance. The degree of explanation was higher in the central Weddell Sea (around 40°W) and lower closer to the Antarctic Peninsula. The geostrophic wind was found to provide almost as good a basis for the general drift estimation as the surface wind observed by the buoys, although strong cyclones were not well detected by the ECMWF analyses. The data suggest a dependency upon atmospheric stability such that stable stratification reduces the wind forcing on the drift. For 60-80% of the time the direction of the drift deviated less than 45° from the geostrophic wind and for 45-70% of the time less than 45° from the ocean current. Ice transport through a transect crossing the Weddell Sea from the Antarctic Peninsula tip to Kapp Norwegia was estimated on the basis of the geostrophic winds, the drift's observed response to the wind, and literature-based information on ice concentration and thickness. The estimated annual mean net export in 1992-1994 varied from 8000 to 22,000 m3/s. Most of the net export took place in winter and spring, export prevailing west of 35°W and import east of it.

  1. Concentrations, metabolic clearance rates, production rates and plasma binding of cortisol in Antarctic phocid seals.

    Science.gov (United States)

    Liggins, G C; France, J T; Schneider, R C; Knox, B S; Zapol, W M

    1993-10-01

    We have reported previously that plasma of the Weddell seal, a member of the phocid family, contains a very high concentration of cortisol. The present study was undertaken to determine whether high cortisol levels were common to seals in the Antarctic environment, or to other phocidae, and to determine the mechanism of the hypercortisolaemia. High levels of cortisol (0.82-2.38 mumol/l) were found in 4 phocidae (Weddell, crabeater, leopard and Southern elephant seals), whereas levels in a member of the otariid family (Antarctic fur seal) were similar to human values. Metabolic clearance rates (MCR) and production rates (PR) of cortisol were determined in the field in Weddell (N = 1), crabeater (N = 3) and leopard (N = 3) seals following bolus injections of [3H] cortisol. The MCR and PR did not differ between the three phocids, but whereas the MCR of 410-590 1/day was twice that of human values, the PR of 460-1180 mumol.m-2 x d-1 was up to 40-fold greater. The binding capacity of corticosteroid-binding globulin (CBG) was equal to or greater than the plasma concentrations of cortisol, resulting in relatively low concentrations of free cortisol. We conclude that hypercortisolaemia is maintained in phocid seals mainly by a high production rate--the highest (corrected for surface area) reported in any species. The relatively low cortisol levels in otariid seals studied in the same environment suggest that the high PR in phocidae is unrelated to the harsh climatic conditions, but may be part of their adaptation for diving to extreme depths.(ABSTRACT TRUNCATED AT 250 WORDS)

  2. Ferrules seals

    Science.gov (United States)

    Smith, J.L.

    1984-07-10

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible. 3 figs.

  3. Ceramic Seal.

    Energy Technology Data Exchange (ETDEWEB)

    Smartt, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Romero, Juan A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Custer, Joyce Olsen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hymel, Ross W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Krementz, Dan [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gobin, Derek [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Harpring, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Martinez-Rodriguez, Michael [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Varble, Don [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); DiMaio, Jeff [Tetramer Technologies, Pendleton, SC (United States); Hudson, Stephen [Tetramer Technologies, Pendleton, SC (United States)

    2016-11-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  4. East Weddell Sea echinoids from the JR275 expedition

    Directory of Open Access Journals (Sweden)

    Thomas Saucède

    2015-05-01

    Full Text Available Information regarding the echinoids in this dataset is based on the Agassiz Trawl (AGT and epibenthic sledge (EBS samples collected during the British Antarctic Survey cruise JR275 on the RRS James Clark Ross in the austral summer 2012. A total of 56 (1 at the South Orkneys and 55 in the Eastern Weddell Sea Agassiz Trawl and 18 (2 at the South Orkneys and 16 in the Eastern Weddell Sea epibenthic sledge deployments were performed at depths ranging from ~280 to ~2060 m. This presents a unique collection for the Antarctic benthic biodiversity assessment of an important group of benthic invertebrates. In total 487 specimens belonging to six families, 15 genera, and 22 morphospecies were collected. The species richness per station varied between one and six. Total species richness represents 27% of the 82 echinoid species ever recorded in the Southern Ocean (David et al. 2005b, Pierrat et al. 2012, Saucède et al. 2014. The Cidaridae (sub-family Ctenocidarinae and Schizasteridae are the two most speciose families in the dataset. They comprise seven and nine species respectively. This is illustrative of the overall pattern of echinoid diversity in the Southern Ocean where 65% of Antarctic species belong to the families Schizasteridae and Cidaridae (Pierrat et al. 2012.

  5. Quantification of sea ice production in Weddell Sea polynyas

    Science.gov (United States)

    Zentek, Rolf; Heinemann, Günther; Paul, Stephan; Stulic, Lukrecia; Timmermann, Ralph

    2017-04-01

    The regional climate model COSMO-CLM was used to perform simulations the Weddell Sea region in Antarctica for the time period 2002-2015 with the focus on atmosphere-ocean-sea ice interactions. The original model was adapted to polar regions by the use of a thermodynamic sea ice module with snow cover and an temperature-dependent albedo scheme for sea ice. The recently published topography RTopo2 was used. The model was run with nesting in ERA-Interim data in a forecast mode. Sea ice concentrations were taken from satellite measurements (AMSR-E, SSMI/S, AMSR2) and were updated daily to allow for a close-to-reality hindcast. Simulations were done with 15 km resolution for the whole period 2002-2015 with the goal to force the sea-ice ocean model FESOM. In a second step a 5 km simulation was one-way nested for the winter period (April - September) 2002-2015 to allow for a better quantification of sea ice production in the Weddell Sea. Estimates of sea ice production and comparisons of the results to remote sensing data will be presented.

  6. On the freshening of the northwestern Weddell Sea continental shelf

    Directory of Open Access Journals (Sweden)

    H. H. Hellmer

    2011-05-01

    Full Text Available We analyzed hydrographic data from the northwestern Weddell Sea continental shelf of the three austral winters 1989, 1997, and 2006 and two summers following the last winter cruise. During summer a thermal front exists at ~64° S separating cold southern waters from warm northern waters that have similar characteristics as the deep waters of the central basin of the Bransfield Strait. In winter, the whole continental shelf exhibits southern characteristics with high Neon (Ne concentrations, indicating a significant input of glacial melt water. The comparison of the winter data from the shallow shelf off the tip of the Antarctic Peninsula, spanning a period of 17 yr, shows a salinity decrease of 0.09 for the whole water column, which has a residence time of <1 yr. We interpret this freshening as being caused by a combination of reduced salt input due to a southward sea ice retreat and higher precipitation during the late 20th century on the western Weddell Sea continental shelf. However, less salinification might also result from a delicate interplay between enhanced salt input due to sea ice formation in coastal areas formerly occupied by Larsen A and B ice shelves and increased Larsen C ice loss.

  7. Turbulent mixing under drifting pack ice in the weddell sea.

    Science.gov (United States)

    McPhee, M G; Martinson, D G

    1994-01-14

    By providing cold, dense water that sinks and mixes to fill the abyssal world ocean, high-latitude air-sea-ice interaction is the main conduit through which the deep ocean communicates with the rest of the climate system. A key element in modeling and predicting oceanic impact on climate is understanding the processes that control the near surface exchange of heat, salt, and momentum. In 1992, the United States-Russian Ice Station Weddell-1 traversed the western Weddell Sea during the onset of winter, providing a platform for direct measurement of turbulent heat flux and Reynolds stress in the upper ocean. Data from a storm early in the drift indicated (i) well-formed Ekman spirals (in both velocity and turbulent stress); (ii) high correlation between mixed layer heat flux and temperature gradients; (iii) that eddy viscosity and eddy thermal diffusivity were similar, about 0.02 square meters per second; and (iv) that the significant turbulent length scale (2 to 3 meters through most of the boundary layer) was proportional to the wavelength at the peak in the weighted vertical velocity spectrum. The measurements were consistent with a simple model in which the bulk eddy viscosity in the neutrally buoyant mixed layer is proportional to kinematic boundary stress divided by the Coriolis parameter.

  8. Distribution, density, and abundance of pack-ice seals in the Amundsen and Ross Seas, Antarctica

    Science.gov (United States)

    Bengtson, John L.; Laake, Jeff L.; Boveng, Peter L.; Cameron, Michael F.; Bradley Hanson, M.; Stewart, Brent S.

    2011-05-01

    We made three sets of population surveys of the four species of ice-inhabiting phocid pinnipeds in the Ross and Amundsen Seas between 26 December 1999 and 24 March 2000 using icebreakers and helicopters deployed from those icebreakers. We used line transect methods to survey 23,671 km by helicopter and 3,694 km by ship accounting for a total coverage of 53,217 km 2. We detected and identified 11,308 seals in 7,104 groups and estimated their abundance from estimates of densities using distance sampling methods and corrections for probability of haul out of seals derived from satellite telemetry of tagged seals. Crabeater seals were most abundant (ca 1.7 million) followed by Weddell seals (330,000), Ross seals (22,600), and leopard seals (15,000). Our estimates of abundance are difficult to directly compare with earlier estimates because of geographic areas covered and by our improvements in survey and analytical methods. Notwithstanding these limitations and with some adjustments for differences in methods, we found that our estimates of abundance for crabeater seals are similar to those from the most recent surveys in the Ross and Amundsen Seas and along the George-Oates Coast. Our estimates for Weddell seals are the first for the broad areas of pack ice that we surveyed in the Ross and Amundsen Seas but indicate that these habitats are ecologically important to this species. Our estimates of abundance of Ross seals were relatively similar to estimates for surveys in these areas in the 1970s and 1980s whereas our estimates of abundance of leopard seals were substantially lower.

  9. Seal Counts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Database of seal counts from aerial photography. Counts by image, site, species, and date are stored in the database along with information on entanglements and...

  10. Multichannel Seismic Reflection Data - SCAR - Weddell Sea - 1978, SDLS CD-ROM vol 17

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are stacked multichannel marine seismic reflection data recorded during 1978 in the Weddell Sea and Queen Maud Land, Antarctica, by the Bundesanstalt fur...

  11. Benthic community productivity in the Magellan Region and in the Weddell Sea

    Directory of Open Access Journals (Sweden)

    Thomas Brey

    1999-12-01

    Full Text Available Our comparison of macrobenthic biomass, production and productivity of the Magellan region (14 - 349 m water depth and the Weddell Sea (132 - 548 m water depth is based on multi box corer samples collected in both areas. Biomass is slightly but not significantly lower in the Magellan region (7.3 g C m-2 than in the Weddell Sea (12.0 g C m-2. Annual production and P/B ratio are higher in the Magellan region (5.1 g C m-2 y-1, 0.7 y-1 as compared to the Weddell Sea (3.6 g C m-2 y-1, 0.3 y-1. In the Magellan region, Mollusca, Polychaeta and Arthropoda dominate benthic production, whereas in the Weddell Sea Polychaeta, Porifera and Echinodermata are the most productive taxa.

  12. Multichannel Seismic Reflection Data - SCAR - Weddell Sea - 1978, SDLS CD-ROM vol 19

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are stacked multichannel marine seismic reflection data recorded during 1978 in the Weddell Sea and Queen Maud Land, Antarctica, by the Bundesanstalt fur...

  13. Multichannel Seismic Reflection Data - SCAR - Weddell Sea - 1978, SDLS CD-ROM vol 18

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are stacked multichannel marine seismic reflection data recorded during 1978 in the Weddell Sea and Queen Maud Land, Antarctica, by the Bundesanstalt fur...

  14. [Christmas seals].

    Science.gov (United States)

    Loytved, G

    2006-11-01

    Christmas seals, i. e., special stamps used to decorate or seal Christmas and New Year's mail, were created by the Danish post office clerk E. Holboell. The proceeds from the sale of the stickers were meant to alleviate the suffering of children sick with tuberculosis. The first Christmas seal, showing a portrait of Queen Louise of Denmark, was issued on December 10, 1904. The demand at the post office was enormous. The funds raised exceeded all expectations and made it possible to finance the construction of a sanatorium for tuberculosis children. The idea of Christmas seals spread quickly around the world and ended up being copied in 130 countries. At the beginning of the 20 (th) century, the small stamp with the red double-barred cross became a banner for the crusade against tuberculosis. For many patients, it also represented a symbol of hope for recovery even though this hope, given the cure rates of a sanatorium treatment, only became a reality for a few. Worldwide, Christmas seals were and are colourful and imaginatively designed, mostly with Christmas symbols or motives relating to the fight against tuberculosis. The funds raised through the sale of the seals initially helped to build hospitals and were later also used to screen persons at risk for tuberculosis, to improve housing conditions of patients and for other measures of support. With the decrease of tuberculosis, some organisations discontinued fundraising through Christmas seals while others widened their intended purpose and supported, for example, the prevention of and research on lung diseases. In Germany, Christmas seals are closely connected with the German Central Committee against Tuberculosis. Today the "Kuratorium Tuberkulose in der Welt" is the only organisation in this country that still raises funds by this means. The funds are mostly used to assist developing countries with a high burden of tuberculosis.

  15. Atmospheric Response to Weddell Sea Open-Ocean Polynya

    Energy Technology Data Exchange (ETDEWEB)

    Hodos, Travis [United States Air Force Academy, Colorado Springs, CO (United States); Weijer, Wilbert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-02

    The atmospheric conditions associated with the rare Weddell Sea open ocean polynya are investigated. The polynya has not been seen since 1976, so data on the event is scarce. The CESM high resolution model is used to investigate multiple atmospheric variables. We analyze three years of polynyas, which are also compared to three years without a polynya. The surface temperature, sensible heat flux, latent heat flux, humidity, average wind speed, precipitation, longwave flux, and shortwave flux all increased over the polynya. The sensible heat flux had a higher magnitude than the latent heat flux because conduction and convection were the primary drivers of heat flux. A combination of increased latent heat flux and humidity led to an increase in precipitation. Increased longwave downwelling flux over the polynya indicated the presence of clouds over the polynya. Lastly, the sea level pressure was consistently lower over the polynya because of the presence of a thermal low generated by thermally driven convective updrafts.

  16. Python fiber optic seal

    Energy Technology Data Exchange (ETDEWEB)

    Ystesund, K.; Bartberger, J.; Brusseau, C.; Fleming, P.; Insch, K.; Tolk, K.

    1993-08-01

    Sandia National Laboratories has developed a high security fiber optic seal that incorporates tamper resistance features that are not available in commercial fiber optic seals. The Python Seal is a passive fiber optic loop seal designed to give indication of unauthorized entry. The seal includes a fingerprint feature that provides seal identity information in addition to the unique fiber optic pattern created when the seal is installed. The fiber optic cable used for the seal loop is produced with tamper resistant features that increase the difficulty of attacking that component of a seal. A Seal Reader has been developed that will record the seal signature and the fingerprint feature of the seal. A Correlator software program then compares seal images to establish a match or mismatch. SNL is also developing a Polaroid reader to permit hard copies of the seal patterns to be obtained directly from the seal.

  17. Distributions, trends and inter-annual variability of nutrients along a repeat section through the Weddell Sea (1996-2011)

    NARCIS (Netherlands)

    Hoppema, Mario; Bakker, Karel; van Heuven, Steven M. A. C.; van Ooijen, Jan C.; de Baar, Henricus

    2015-01-01

    Nutrient data from five repeat sections spanning 1996 to 2011 crossing the Weddell Sea are presented. These measurements have been standardized against the same reference material, yielding an outstanding internal consistency. The generic structure of the Weddell Gyre and its hydrographic features

  18. Repeated CFC sections at the Greenwich Meridian in the Weddell Sea

    Science.gov (United States)

    Klatt, Olaf; Roether, Wolfgang; Hoppema, Mario; Bulsiewicz, Klaus; Fleischmann, Uli; Rodehacke, Christian; Fahrbach, Eberhard; Weiss, Ray F.; Bullister, John L.

    2002-04-01

    Repeated observations of the tracer chlorofluorocarbon-11 (CFC-11) for a section along the Greenwich Meridian from Antarctica (70°S) to about 50°S are presented for the period 1984-1998. The CFC sections display a highly persistent pattern. A middepth CFC minimum in the central Weddell Sea is bounded laterally by elevated levels of dissolved CFCs at the southern margin of the Weddell Basin and by a column of elevated CFC concentrations around 55°S near to the northern margin. Part of the latter column covers waters of the Antarctic Circumpolar Current, which indicates that a moderate portion of these waters was ventilated in the Weddell Sea. Deep CFC maxima adjoining the southern and northern margins of the Weddell Basin indicate advective cores of recently ventilated waters. The southern core supports previous notions of deep water import into the Weddell Sea from the east. For all deep and bottom waters, the portions ventilated on the CFC timescale (~50 years) are small. Effective initial CFC saturations for these portions are estimated to be between 60 and 70%, using in part new data from off the Filchner-Ronne Ice Shelf. For various CFC features along the section (mostly advective cores), ventilated fractions and mean ages of these fractions were obtained (with error limits). The procedure was to fit an age distribution of a prescribed form to CFC-11 time series for these features, constructed from the various realizations of the CFC section. The ages are between 3 and 19 years, and the ventilated fractions range between 6 and 23%, indicating a rather limited ventilation of the interior Weddell Sea subsurface layer waters on the CFC timescale. It is shown that the concurrent CFC-12 data provide little additional information. The work demonstrates a high information content of repeated tracer observations and encourages similar approaches also in other ocean regions.

  19. Major histocompatibility complex class II DOA sequences from three Antarctic seal species verify stabilizing selection on the DO locus.

    Science.gov (United States)

    Decker, D J; Stewart, B S; Lehman, N

    2002-12-01

    To provide additional support for the sequence conservation and hence the regulatory role of the MHC class II DOA locus, we obtained the nucleotide sequences of exon 2 and exon 3, along with the intervening intron, of the Ross seal, and sequences from the exon 2 region from the Weddell and leopard seals. These are the first reports of the sequences of this locus from a carnivore species. The results demonstrate strong conservation among mammals for the exon sequence and produce a gene genealogy that is consistent in topology with a species tree.

  20. Turbine with radial acting seal

    Energy Technology Data Exchange (ETDEWEB)

    Eng, Darryl S; Ebert, Todd A

    2016-11-22

    A floating brush seal in a rim cavity of a turbine in a gas turbine engine, where the floating brush seal includes a seal holder in which the floating brush seal floats, and a expandable seal that fits within two radial extending seal slots that maintains a seal with radial displacement of the floating brush seal and the seal holder.

  1. A molecular view of pinniped relationships with particular emphasis on the true seals.

    Science.gov (United States)

    Arnason, U; Bodin, K; Gullberg, A; Ledje, C; Mouchaty, S

    1995-01-01

    Phylogenetic analysis of conservative nucleotide substitutions in 18 complete sequences of the mitochondrial cytochrome b gene of Phocidae (true seals), Odobenidae (walruses), and Otariidae (sea lions and fur seals), plus three ursid and three felid sequences, identified the pinnipeds as monophyletic with Otariidae and Odobenidae on a common evolutionary branch. Analysis of total nucleotide differences separated the evolutionary lineages of northern and southern phocids. Both lineages are distinct from the most ancestral phocid genus, Monachus (monk seals), represented by the Hawaiian monk seal. The inclusion of the Hawaiian monk seal in the subfamily Monachinae makes the subfamily paraphyletic. Among the northern phocids, the hooded seal (genus Cystophora, chromosome number 2n = 34) is sister taxon to the Phoca complex. The Phoca complex, which is characterized by the chromosome number 2n = 32, includes genus Phoca and the monotypic genus Halichoerus (grey seal). The comparison does not support a generic distinction of Halichoerus within the Phoca complex. The present data suggest that Cystophora and Phoca separated > or = 6 million years ago. Among the southern phocids the close molecular relationship of the Weddell and leopard seals relative to their morphological distinction exemplifies rapid adaptation to different ecological niches. This result stands in contrast to the limited morphological differentiation relative to the pronounced molecular distinctions that may occur within the Phoca complex.

  2. Triple acting radial seal

    Science.gov (United States)

    Ebert, Todd A [West Palm Beach, FL; Carella, John A [Jupiter, FL

    2012-03-13

    A triple acting radial seal used as an interstage seal assembly in a gas turbine engine, where the seal assembly includes an interstage seal support extending from a stationary inner shroud of a vane ring, the interstage seal support includes a larger annular radial inward facing groove in which an outer annular floating seal assembly is secured for radial displacement, and the outer annular floating seal assembly includes a smaller annular radial inward facing groove in which an inner annular floating seal assembly is secured also for radial displacement. A compliant seal is secured to the inner annular floating seal assembly. The outer annular floating seal assembly encapsulates the inner annular floating seal assembly which is made from a very low alpha material in order to reduce thermal stress.

  3. Damper Spring For Omega Seal

    Science.gov (United States)

    Maclaughlin, Scott T.; Montgomery, Stuart K.

    1993-01-01

    Damper spring reduces deflections of omega-cross-section seal, reducing probability of failure and extending life of seal. Spring is split ring with U-shaped cross section. Placed inside omega seal and inserted with seal into seal cavity. As omega seal compressed into cavity, spring and seal make contact near convolution of seal, and spring becomes compressed also. During operation, when seal dynamically loaded, spring limits deflection of seal, reducing stress on seal.

  4. On the near-bottom variability in the northwestern Weddell Sea

    Science.gov (United States)

    Schröder, M.; Hellmer, H. H.; Absy, J. M.

    The thermohaline data from the first Brazilian hydrographic cruise to the northwestern Weddell Sea (AR XVIII) revealed significant near-bottom changes in water-column properties over seasonal and interannual time scales. Favorable ice conditions in 2000 allowed a dense station coverage of the area including the main pathways for Weddell Sea deep and bottom waters. The new results are compared with the data from the 1998 German cruise ANT XV/4 and other historical data. A warming of the bottom layer was discovered that was more attributable to short-term seasonal or interannual fluctuations in the formation of cold bottom water than to a long-term trend. There was both consistency and variation between and within seasons. Invariant bottom-water characteristics were observed in different seasons (summer/winter), and variable bottom-water characteristics were observed in the same season (summer) at the same locations. This reduces the possibility of a dominant seasonal effect. Instead, we propose that the intermittent behavior of small cold-water sources along the Weddell Sea's periphery causes the variability measured in the deep northwestern Weddell Sea. The observed variability has consequences for the water-mass export across the South Scotia Ridge, as the absence of the fresher/lighter Weddell Sea Bottom Water south of South Orkney Plateau during AR XVIII might be linked to a reduced ventilation of the deep Scotia Sea. The results of this study show the need for ongoing efforts for establishing a long-term monitoring of this region with global importance.

  5. Flexible sliding seal

    Science.gov (United States)

    Wallenhorst, E. L.

    1980-01-01

    Circular seal both slides and flexes to accomodate relative motion between two sealed members. Originally developed for Space Shuttle orbiter, it contains sliding seal to accommodate engine gimbaling and flexible seal that absorbs forward motion at high thrust of engine heat shield relative to airframe. Other possible applications are in support structures of heavy machinery and vehicle engines. Flexible sliding seal is ring about 7 feet in diameter and can withstand temperatures up to 1,600 F.

  6. A dynamically consistent analysis of circulation and transports in the southwestern Weddell Sea

    Directory of Open Access Journals (Sweden)

    M. Yaremchuk

    1998-08-01

    Full Text Available An inverse model is applied for the analysis of hydrographic and current meter data collected on the repeat WOCE section SR4 in the Weddell Sea in 1989–1992. The section crosses the Weddell Sea cyclonic gyre from Kapp Norvegia to the northern end of the Antarctic Peninsula. The concepts of geostrophy, conservation of planetary vorticity and hydrostatics are combined with advective balances of active and passive properties to provide a dynamically consistent circulation pattern. Our variational assimilation scheme allows the calculation of three-dimensional velocities in the section plane. Current speeds are small except along the coasts where they reach up to 12 cm/s. We diagnose a gyre transport of 34 Sverdrup which is associated with a poleward heat transport of 28×1012 W corresponding to an average heat flux of 15 Wm–2 in the Weddell Sea south of the transect. This exceeds the estimated local flux on the transect of 2 Wm–2. As the transect is located mostly in the open ocean, we conclude that the shelf areas contribute significantly to the ocean-atmosphere exchange and are consequently key areas for the contribution of the Weddell Sea to global ocean ventilation. Conversion of water masses occuring south of the section transform 6.6±1.1 Sv of the inflowing warm deep water into approximately equal amounts of Weddell Sea deep water and Weddell Sea bottom water. The volume transport of surface water equals in the in- and outflow. This means that almost all newly formed surface water is involved in the deep and bottom water formation. Comparison with the results obtained by pure velocity interpolation combined with a hydrographic data subset indicates major differences in the derived salt transports and the water mass conversion of the surface water. The differences can be explained by deviations in the structure of the upper ocean currents to which shelf areas contribute significantly. Additionally a rigorous variance analysis is

  7. Rotary shaft sealing assembly

    Science.gov (United States)

    Dietle, Lannie L.; Schroeder, John E.; Kalsi, Manmohan S.; Alvarez, Patricio D.

    2010-09-21

    A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

  8. Nuclear reactor sealing system

    Science.gov (United States)

    McEdwards, James A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

  9. Quantification of sea ice production at coastal polynyas in the southern Weddell Sea

    Science.gov (United States)

    Stulic, Lukrecia; Timmermann, Ralph; Zentek, Rolf; Heinemann, Günther

    2017-04-01

    Sea ice production and associated High Salinity Shelf Water (HSSW) formation in the southern Weddell Sea is an important driver for the global thermohaline ocean circulation and determines the properties of shelf water inflow that fuels ice shelf basal melting. In the southern Weddell Sea, coastal polynyas cover 1% of the area, but contribute about 10% to the total winter sea ice production. This project aims to improve estimates of the sea ice production and HSSW formation in the southern Weddell Sea coastal polynyas by a synergy of numerical simulations and remote sensing data. Sea ice-ocean simulations are performed with the Finite Element Sea ice-Ocean Model (FESOM) with a horizontal resolution close to the Rossby radius over the whole Weddell Sea to better represent eddy dynamics. In order to asses sensitivity of polynya characteristics and HSSW formation rates to the atmospheric forcing, FESOM is forced with different reanalysis data (ERA-Interim, NCEP-CFSR). Mean sea ice growth for the simulated period (1979-2012) is lower and more localized along the coastline/ice shelf front in the NCEP-CFSR run. Differences may be attributed to the colder air temperatures and stronger offshore winds in ERA-Interim forcing. FESOM will be forced with output from the regional atmospheric model COSMO-CLM (CCLM) to further investigate sensitivity with respect to different atmospheric forcing. The best and most realistic ice production and HSSW formation estimates are expected to be obtained by assimilation of thin ice thickness data derived from MODIS retrievals into FESOM. This will lead to a high resolution data set of sea ice coverage and ice thickness fields that can be used as reference data set for other sea ice models and as an input for high-resolution atmospheric models.

  10. Inboard seal mounting

    Science.gov (United States)

    Hayes, John R. (Inventor)

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  11. Magnetically Actuated Seal Project

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT proposes development of a magnetically actuated dynamic seal. Dynamic seals are used throughout the turbopump in high-performance, pump-fed, liquid rocket...

  12. Magnetically Actuated Seal

    Science.gov (United States)

    Pinera, Alex

    2013-01-01

    This invention is a magnetically actuated seal in which either a single electromagnet, or multiple electromagnets, are used to control the seal's position. This system can either be an open/ close type of system or an actively controlled system.

  13. Increasing levels and biomagnification of persistent organic pollutants (POPs) in Antarctic biota

    Energy Technology Data Exchange (ETDEWEB)

    Goerke, Helmut; Weber, Kurt; Bornemann, Horst; Ramdohr, Sven; Ploetz, Joachim

    2004-02-01

    Representatives of the Antarctic food web (krill, cephalopod, fish, penguin, seal) of the area around Elephant Island and from the Weddell Sea were analysed for the most recalcitrant organochlorine compounds. Due to sorption of the compounds to sinking particles and accumulation in sediments, two benthic fish species (Gobionotothen gibberifrons, Chaenocephalus aceratus) feeding on benthos invertebrates and fish reflected significantly increasing concentrations within a decade (1987-1996), while a benthopelagic species (Champsocephalus gunnari) feeding on krill did not. In the pelagic food chain, lipid normalised concentrations of all compounds increased from Antarctic krill to fish proving that biomagnification of highly lipophilic pollutants (log octanol-water partition coefficient > 5) occurs in water-breathing animals. As top predators Weddell and southern elephant seals (Leptonychotes weddellii, Mirounga leonina) biomagnified the persistent organic pollutants relative to krill 30-160 fold with the exception of hexachlorobenzene, the levels of which were lower than in fish indicating its intense specific elimination.

  14. Skew resisting hydrodynamic seal

    Science.gov (United States)

    Conroy, William T.; Dietle, Lannie L.; Gobeli, Jeffrey D.; Kalsi, Manmohan S.

    2001-01-01

    A novel hydrodynamically lubricated compression type rotary seal that is suitable for lubricant retention and environmental exclusion. Particularly, the seal geometry ensures constraint of a hydrodynamic seal in a manner preventing skew-induced wear and provides adequate room within the seal gland to accommodate thermal expansion. The seal accommodates large as-manufactured variations in the coefficient of thermal expansion of the sealing material, provides a relatively stiff integral spring effect to minimize pressure-induced shuttling of the seal within the gland, and also maintains interfacial contact pressure within the dynamic sealing interface in an optimum range for efficient hydrodynamic lubrication and environment exclusion. The seal geometry also provides for complete support about the circumference of the seal to receive environmental pressure, as compared the interrupted character of seal support set forth in U.S. Pat. Nos. 5,873,576 and 6,036,192 and provides a hydrodynamic seal which is suitable for use with non-Newtonian lubricants.

  15. Seals in motion

    NARCIS (Netherlands)

    Brasseur, Sophie Marie Jacqueline Michelle

    2017-01-01

    The harbour seal Phoca vitulina and the grey seal Halichoerus grypus have been inhabitants of the Wadden Sea since millennia. Prehistoric findings indicate the presence of both species around 5000 BC. This changed dramatically in the mid Middle-Ages as around 1500 AC, the grey seal disappeared from

  16. Low Cost, Durable Seal

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, George; Parsons, Jason; Friedman, Jake

    2010-12-17

    Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.

  17. Scientific background document in support of the development of a CCAMLR MPA in the Weddell Sea (Antarctica) - Version 2015 - Part A: General context of the establishment of MPAs and background information on the Weddell Sea MPA planning area-

    OpenAIRE

    Teschke, Katharina; Beaver, Daniel; Bester, Marthán; Bombosch, Annette; Bornemann, Horst; Brandt, Angelika; Brtnik, Patricia; De Broyer, Claude; Burkhardt, Elke; Dieckmann, Gerhard; Douglass, Lucinda; Flores, Hauke; Gerdes, Dieter; Griffiths, Huw; Gutt, Julian

    2015-01-01

    Germany intends to present the Working Group on Ecosystem Monitoring and Management (WG EMM) the background document that provides the scientific basis for the evaluation of a marine protected area (MPA) in the Weddell Sea planning area. The contents and structure of the whole document reflect its main objectives, i.e. to set out the general context of the establishment of MPAs and to provide the background information on the Weddell Sea MPA (WSMPA) planning area (Part A); to inform on the da...

  18. Sealing materials seals for arctic applications

    OpenAIRE

    Eichstaedt, Joanna Anna

    2016-01-01

    This thesis is about exploring the performance of rubber O-ring seals made of materials such as: ELAST-O-LION 101, base HNBR and HNBR 50 CB, under cold temperatures and compressions equal to 10% and 20%. Initially a test apparatus with cooling chamber was built to evaluate seal performance at different temperatures and contact pressures. This part of the project included building the environmental chamber in which the mechanical compression rig is located, as well as connecting the circulatin...

  19. A dynamically consistent analysis of circulation and transports in the southwestern Weddell Sea

    Directory of Open Access Journals (Sweden)

    M. Yaremchuk

    Full Text Available An inverse model is applied for the analysis of hydrographic and current meter data collected on the repeat WOCE section SR4 in the Weddell Sea in 1989–1992. The section crosses the Weddell Sea cyclonic gyre from Kapp Norvegia to the northern end of the Antarctic Peninsula. The concepts of geostrophy, conservation of planetary vorticity and hydrostatics are combined with advective balances of active and passive properties to provide a dynamically consistent circulation pattern. Our variational assimilation scheme allows the calculation of three-dimensional velocities in the section plane. Current speeds are small except along the coasts where they reach up to 12 cm/s. We diagnose a gyre transport of 34 Sverdrup which is associated with a poleward heat transport of 28×1012 W corresponding to an average heat flux of 15 Wm–2 in the Weddell Sea south of the transect. This exceeds the estimated local flux on the transect of 2 Wm–2. As the transect is located mostly in the open ocean, we conclude that the shelf areas contribute significantly to the ocean-atmosphere exchange and are consequently key areas for the contribution of the Weddell Sea to global ocean ventilation. Conversion of water masses occuring south of the section transform 6.6±1.1 Sv of the inflowing warm deep water into approximately equal amounts of Weddell Sea deep water and Weddell Sea bottom water. The volume transport of surface water equals in the in- and outflow. This means that almost all newly formed surface water is involved in the deep and bottom water formation. Comparison with the results obtained by pure velocity interpolation combined with a hydrographic data subset indicates major differences in the derived salt transports and the water mass conversion of the surface water. The differences can be explained by deviations in the structure of the upper ocean currents to which shelf areas contribute significantly. Additionally a

  20. Southern Ocean ventilation and bottom water formation driven by Weddell Sea polynyas

    Science.gov (United States)

    Rheinlaender, Jonathan; Nisancioglu, Kerim; Smedsrud, Lars Henrik

    2017-04-01

    A distinct feature of the last glacial period, are the abrupt temperature fluctuations in Greenland associated with Dansgaard-Oeschger events and a similar but opposite response in Antarctica. The prevailing hypothesis behind this inter-hemispheric coupling, points to changes in deep water formation as the main driver, thus highlighting the pivotal role of the high latitude oceans in global climate. Bottom water formation through open-ocean deep convection in an Antarctic polynya, a large open water area inside the winter sea ice cover, provide a potential mechanism to trigger such changes in ocean circulation. In this study, an ocean-sea ice only version of the Norwegian Earth System Model (NorESM) is explored and shows strong open-ocean deep convection associated with large polynyas in the Weddell Sea. This provides us with an opportunity to test (1) how internal ocean dynamics can trigger abrupt changes in sea-ice cover and (2) how these polynyas affect the overturning circulation through changes in bottom water formation. During the 1,000 year long free-running simulation two polynyas are observed. We show, that the polynya is caused by subsurface warming leading to a gradual weakening of the surface stratification which destabilizes the whole water column and eventually triggers deep convective overturning. This mixes up relatively warm deep water causing extensive melt of sea ice in the Weddell Sea, while cold and fresh surface water sinks to the bottom. Consequently, the polynya leads to extensive bottom water formation and increase in the northward flow of Antarctic Bottom Water, while the southward flow of North Atlantic Deep Water is reduced. Finally, our results suggest that a decrease in the temperature of warm deep water in the Weddell Sea leads to cessation of open-ocean deep convection. This raises the question if open-ocean deep convection associated with polynyas in the Southern Ocean could be a realistic feature in a cold, glacial climate.

  1. Morphology of sea ice pressure ridges in the northwestern Weddell Sea in winter

    Science.gov (United States)

    Tan, Bing; Li, Zhi-Jun; Lu, Peng; Haas, Christian; Nicolaus, Marcel

    2012-06-01

    To investigate the morphology and distribution of pressure ridges in the northwestern Weddell Sea, ice surface elevation profiles were measured by a helicopter-borne laser altimeter during Winter Weddell Outflow Study with the German R/V Polarstern in 2006. An optimal cutoff height of 0.62 m, derived from the best fits between the measured and theoretical ridge height and spacing distributions, was first used to separate pressure ridges from other sea ice surface undulations. It was found that the measured ridge height distribution was well modeled by a negative exponential function, and the ridge spacing distribution by a lognormal function. Next, based on the ridging intensity Ri (the ratio of mean ridge sail height to mean spacing), all profiles were clustered into three regimes by an improved k-means clustering algorithm: Ri ≤ 0.01, 0.01 0.026 (denoted as C1, C2, and C3 respectively). Mean (and standard deviation) of sail height was 0.99 (±0.07) m in Regime C1, 1.12 (±0.06) m in C2, and 1.17 (±0.04) m in C3, respectively, while the mean spacings (and standard deviations) were 232 (±240) m, 54 (±20) m, and 31 (±5.6) m. These three ice regimes coincided closely with distinct sea ice regions identified in a satellite radar image, where C1 corresponded to the broken ice in the marginal ice zone and level ice formed in the Larsen Polynya, C2 corresponded to the deformed first- and second-year ice formed by dynamic action in the center of the study region, and C3 corresponded to heavily deformed ice in the outflowing branch of the Weddell Gyre. The results of our analysis showed that the relationship between the mean ridge height and frequency was well modeled by a logarithmic function with a correlation coefficient of 0.8, although such correlation was weaker when considering each regime individually. The measured ridge height and frequency were both greater than those reported by others for the Ross Sea. Compared with reported values for other parts of the

  2. Inflatable traversing probe seal

    Science.gov (United States)

    Trimarchi, Paul A.

    1991-01-01

    An inflatable seal acts as a pressure-tight zipper to provide traversing capability for instrumentation rakes and probes. A specially designed probe segment with a teardrop cross-section in the vicinity of the inflatable seal minimizes leakage at the interface. The probe is able to travel through a lengthwise slot in a pressure vessel or wind tunnel section, while still maintaining pressure integrity. The design uses two commercially available inflatable seals, opposing each other, to cover the probe slot in a wind tunnel wall. Proof-of-concept tests were conducted at vessel pressures up to 30 psig, with seals inflated to 50 psig, showing no measurable leakage along the seal's length or around the probe teardrop cross-section. This seal concept can replace the existing technology of sliding face plate/O-ring systems in applications where lengthwise space is limited.

  3. Sodium sulfur battery seal

    Science.gov (United States)

    Mikkor, Mati

    1981-01-01

    This disclosure is directed to an improvement in a sodium sulfur battery construction in which a seal between various battery compartments is made by a structure in which a soft metal seal member is held in a sealing position by holding structure. A pressure applying structure is used to apply pressure on the soft metal seal member when it is being held in sealing relationship to a surface of a container member of the sodium sulfur battery by the holding structure. The improvement comprises including a thin, well-adhered, soft metal layer on the surface of the container member of the sodium sulfur battery to which the soft metal seal member is to be bonded.

  4. Foil Face Seal Testing

    Science.gov (United States)

    Munson, John

    2009-01-01

    In the seal literature you can find many attempts by various researchers to adapt film riding seals to the gas turbine engine. None have been successful, potential distortion of the sealing faces is the primary reason. There is a film riding device that does accommodate distortion and is in service in aircraft applications, namely the foil bearing. More specifically a foil thrust bearing. These are not intended to be seals, and they do not accommodate large axial movement between shaft & static structure. By combining the 2 a unique type of face seal has been created. It functions like a normal face seal. The foil thrust bearing replaces the normal primary sealing surface. The compliance of the foil bearing allows the foils to track distortion of the mating seal ring. The foil seal has several perceived advantages over existing hydrodynamic designs, enumerated in the chart. Materials and design methodology needed for this application already exist. Also the load capacity requirements for the foil bearing are low since it only needs to support itself and overcome friction forces at the antirotation keys.

  5. High Test Peroxide High Sealing Conical Seal Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High Test Peroxide (HTP) Highly Compatible High Sealing Conical Seals are necessary for ground test operations and space based applications. Current conical seals...

  6. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

    OpenAIRE

    Chuanjun Han; Han Zhang; Jie Zhang

    2015-01-01

    In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficie...

  7. Geology, geophysics, and hydrocarbon potential of Antarctica continental margin of Weddell Sea

    Energy Technology Data Exchange (ETDEWEB)

    Hinz, K.; Kristoffersen, Y.

    1987-05-01

    A prominent escarpment, called the Explora-Andenes Escarpment, has been recognized between long. 40/sup 0/W, lat. 72/sup 0/40'S and long. 10/sup 0/W, lat. 69/sup 0/20'S. It separates the continental margin from the Weddell Sea basin. Their recent MCS data have revealed the presence of some remarkably symmetric structures beneath a thick pile of tectonically undisturbed sediments. For example, two extensive wedge-shaped basement units occur between 20/sup 0/W and 40/sup 0/W. These units are characterized by a pattern of divergent reflectors which surround an elongated depression in basement. The northern wedge terminates against the Explora-Andenes Escarpment between 25/sup 0/W and 30/sup 0/W. The southern wedge, known as the Explora Wedge, shows a northward-dipping reflection pattern. The seismic characteristics suggest that both wedges consist of volcanic rocks. The basement depression is interpreted as a failed rift basin. The initial fragmentation of Gondwana was accompanied by prolific volcanism, which led to the emplacement of the wedges of dipping reflectors. The tectonomagmatic/volcanic period was followed by transtensional movements between Africa and Antarctica. This phase was heralded by the formation of the Explora-Andenes Escarpment as a new plate boundary and the opening of the Weddell Sea by sea-floor spreading. The Explora-Andenes Escarpment cuts across the early rift structures.

  8. Macro- and megabenthic assemblages in the bathyal and abyssal Weddell Sea (Southern Ocean)

    Science.gov (United States)

    Linse, Katrin; Brandt, Angelika; Bohn, Jens M.; Danis, Bruno; De Broyer, Claude; Ebbe, Brigitte; Heterier, Vincent; Janussen, Dorte; López González, Pablo J.; Schüller, Myriam; Schwabe, Enrico; Thomson, Michael R. A.

    2007-08-01

    The assemblages inhabiting the continental shelf around Antarctica are known to be very patchy, in large part due to deep iceberg impacts. The present study shows that richness and abundance of much deeper benthos, at slope and abyssal depths, also vary greatly in the Southern and South Atlantic oceans. On the ANDEEP III expedition, we deployed 16 Agassiz trawls to sample the zoobenthos at depths from 1055 to 4930 m across the northern Weddell Sea and two South Atlantic basins. A total of 5933 specimens, belonging to 44 higher taxonomic groups, were collected. Overall the most frequent taxa were Ophiuroidea, Bivalvia, Polychaeta and Asteroidea, and the most abundant taxa were Malacostraca, Polychaeta and Bivalvia. Species richness per station varied from 6 to 148. The taxonomic composition of assemblages, based on relative taxon richness, varied considerably between sites but showed no relation to depth. The former three most abundant taxa accounted for 10-30% each of all taxa present. Standardised abundances based on trawl catches varied between 1 and 252 individuals per 1000 m 2. Abundance significantly decreased with increasing depth, and assemblages showed high patchiness in their distribution. Cluster analysis based on relative abundance showed changes of community structure that were not linked to depth, area, sediment grain size or temperature. Generally abundances of zoobenthos in the abyssal Weddell Sea are lower than shelf abundances by several orders of magnitude.

  9. Three new species of deep-sea Gromia (Protista, Rhizaria) from the bathyal and abyssal Weddell Sea, Antarctica

    DEFF Research Database (Denmark)

    Rothe, Nina; Gooday, Andrew J.; Cedhagen, Tomas

    2009-01-01

    We describe three new species of the genus Gromia from bathyal and abyssal depths in the Weddell Sea. The new species are characterized by a combination of morphological and molecular criteria. All three species possess a distinct oral capsule and a layer of ‘honeycomb membranes’, which form the ...

  10. Basic epidemiological data on metazoan parasites of notothenioid fish off James Ross Island (Prince Gustav Channel, Weddell Sea), Antarctica

    Czech Academy of Sciences Publication Activity Database

    Nezhybová, Veronika; Mašová, Š.

    2015-01-01

    Roč. 5, č. 1 (2015), s. 44-54 ISSN 1805-0689 R&D Projects: GA ČR(CZ) GBP505/12/G112 Institutional support: RVO:68081766 Keywords : Host * Notothenioid fish * Parasites * Prince Gustav Channel * Weddell Sea Subject RIV: EG - Zoology

  11. Stratification and the distribution of phytoplankton, nutrients, inorganic carbon, and sulfur in the surface waters of Weddell Sea leads

    NARCIS (Netherlands)

    Zemmelink, H. J.; Houghton, L.; Dacey, J. W. H.; Stefels, J.; Koch, B. P.; Wisotzki, A.; Scheltz, A.; Thomas, D. N.; Papadimitriou, S.; Kennedy, H.; Kuosa, H.; Dittmar, T.

    2008-01-01

    The distribution (fine resolution depth profiles) of major nutrients, chlorophyll-a, organic compounds, and phytoplankton (biomass and numbers) was examined in lead water in pack ice of the Weddell Sea. Samples were taken by pulling water into a syringe from a series of depths from 0.002 to 4m.

  12. Macrostylis cerritus sp nov., a new species of Macrostylidae (Isopoda : Asellota) from the Weddell Sea, Southern Ocean

    NARCIS (Netherlands)

    Vey, Aidan; Brix, Saskia

    2009-01-01

    Macrostylis cerritus sp. nov. (Macrostylidae) is described from the Weddell Sea, Antarctica, at a depth of 2149 m. The new species differs from other species of Macrostylis due to the incisor with 4 cusps; the strongly hook-shaped ischium of pereopod 3; pereopod 4 being greatly reduced and juvenile

  13. Rotary shaft seal

    Science.gov (United States)

    Langebrake, C.O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transucer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

  14. Performance evaluation of fog seals on chip seals and verification of fog seal field tests

    National Research Council Canada - National Science Library

    Kim, Y. Richard; Im, Jeong Hyuk

    2015-01-01

    .... To mitigate a major problem with chip seals, i.e., the loose aggregate particles, fog seals, which are composed of an emulsified product placed on top of the chip seal, can be used to help control the loose aggregate...

  15. SEALING SIMULATED LEAKS

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  16. Sealing device for providing a seal in a turbomachine

    Energy Technology Data Exchange (ETDEWEB)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward; Weber, David Wayne

    2016-08-16

    Sealing device for providing seals between adjacent components, and turbomachines utilizing such sealing devices, are provided. A sealing device includes a seal plate insertable between the adjacent components, the seal plate comprising a first face and an opposing second face. The sealing device further includes a plurality of pins extending from one of the first face or the second face, the plurality of pins configured to space the one of the first face or the second face from contact surfaces of the adjacent components.

  17. New records of Antarctic and Sub-Antarctic sea anemones (Cnidaria, Anthozoa, Actiniaria and Corallimorpharia) from the Weddell Sea, Antarctic Peninsula, and Scotia Arc.

    Science.gov (United States)

    Rodríguez, Estefanía

    2013-01-01

    Herein we provide new records for 22 Antarctic species of sea anemone sensu lato (Anthozoa: Actiniaria and Corallimorpharia) from the Weddell Sea, Antarctic Peninsula, and the Scotia Sea. We provided short descriptions, images of the external morphology of preserved specimens (but also of living specimens in most cases), cnida data, and distribution maps for each studied species. New records are presented for nine species in the Weddell Sea and the geographic or bathymetric distributions for 19 of the 22 studied species are extended.

  18. Progress report on the scientific data compilation and analyses in support of the development of a CCAMLR MPA in the Weddell Sea (Antarctica)

    OpenAIRE

    Teschke, Katharina; Bornemann, Horst; Bombosch, Annette; Brey, Thomas; Brtnik, Patricia; Burkhardt, Elke; Dorschel, Boris; Feindt-Herr, Helena; Gerdes, Dieter; Gutt, Julian; Hain, Stefan; Herata, Heike; Jerosch, Kerstin; Knust, Rainer; Kock, Karl-Hermann

    2013-01-01

    At the CCAMLR meeting in 2012, the Commission welcomed the offer of Germany to take the lead in developing a Weddell Sea MPA for consideration in 2014. Subsequently, the German Federal Ministry of Food, Agriculture and Consumer Protection tasked the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research to compile and analyse scientific data for identifying areas which require particular protection in the Weddell Sea. Work under this project started mid-April 2013. This prog...

  19. Protists from the ice-edge region of the Weddell Sea

    Science.gov (United States)

    Buck, Kurt R.; Garrison, David L.

    1983-12-01

    We present some of the first records and quantitative data on protists from the ice-edge region of the Weddell Sea. Major groups were diatoms (33 species), dinoflagellates (4 species), prymnesiophytes (2 species), cryptomonads (2 species), prasinophytes (1 species), chrysophytes (3 species), and choanoflagellates (11 species). The prymnesiophyte, Phaeocystis pouchetii, diatoms (predominantly Nitzschia of the Fragilariopsis group), and choanogflagellates (Acanthoecidae) were numerically dominant, although other protists sometimes contributed significantly to plankton populations. Most groups were more abundant at the ice edge than under the pack ice or in the open water. The abundance of choanoflagellates suggests that food chains based on bacterial production must be important, as well as the traditional diatom-krill-vertebrate food chain.

  20. A new species of Halcampella (Actiniaria, Halcampoididae from the eastern Weddell Sea and Antarctic Peninsula

    Directory of Open Access Journals (Sweden)

    Estefanía Rodríguez

    2002-03-01

    Full Text Available A new species of soft-bottom-dwelling sea anemone of the genus Halcampella is described and illustrated based on 47 specimens collected during the Polarstern cruises ANT XV/3 and ANT XVII/3 to the Antarctic Peninsula and the eastern Weddell Sea. The new Halcampella species is easily distinguishable from its congeners by the number of cycles of mesenteries and tentacles, the cnidae and the geographic distribution. The new species is described and compared to the available type material of the other species of the genus and new cnidae data are given for H. maxima Hertwig, 1888 and H. robusta Carlgren, 1931. According to other authors H. endromitata (Andres, 1881 is considered a nomen dubium and H. maxima is here proposed as the types species of the genus.

  1. Ingestion resistant seal assembly

    Science.gov (United States)

    Little, David A [Chuluota, FL

    2011-12-13

    A seal assembly limits gas leakage from a hot gas path to one or more disc cavities in a gas turbine engine. The seal assembly includes a seal apparatus associated with a blade structure including a row of airfoils. The seal apparatus includes an annular inner shroud associated with adjacent stationary components, a wing member, and a first wing flange. The wing member extends axially from the blade structure toward the annular inner shroud. The first wing flange extends radially outwardly from the wing member toward the annular inner shroud. A plurality of regions including one or more recirculation zones are defined between the blade structure and the annular inner shroud that recirculate working gas therein back toward the hot gas path.

  2. Fur seal investigations, 1966

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annually a report is made on the fur seal investigations carried on by the Bureau of Commercial Fisheries on the Pribilof Islands and at sea. Investigations on the...

  3. Spotted Seal Distribution Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains GIS layers that depict the known spatial distributions (i.e., ranges) and reported breeding areas of spotted seals (Phoca largha). It was...

  4. Turbine seal assembly

    Science.gov (United States)

    Little, David A.

    2013-04-16

    A seal assembly that limits gas leakage from a hot gas path to one or more disc cavities in a turbine engine. The seal assembly includes a seal apparatus that limits gas leakage from the hot gas path to a respective one of the disc cavities. The seal apparatus comprises a plurality of blade members rotatable with a blade structure. The blade members are associated with the blade structure and extend toward adjacent stationary components. Each blade member includes a leading edge and a trailing edge, the leading edge of each blade member being located circumferentially in front of the blade member's corresponding trailing edge in a direction of rotation of the turbine rotor. The blade members are arranged such that a space having a component in a circumferential direction is defined between adjacent circumferentially spaced blade members.

  5. Bearded Seal Distribution Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains GIS layers that depict the known spatial distributions (i.e., ranges) of the two subspecies of bearded seals (Erignathus barbatus). It was...

  6. Ringed Seal Distribution Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains GIS layers that depict the known spatial distributions (i.e., ranges) of the five subspecies of ringed seals (Phoca hispida). It was produced...

  7. Damping Seals for Turbomachinery

    Science.gov (United States)

    Von Pragenau, G. L.

    1984-01-01

    Seals with rough surfaces proposed for stabilizing shaft motion and preventing leakage along shaft in machines such as turbopumps. Applicable to turbomachinery with speed limits raised and bearing life extended, avoiding costly shutdowns.

  8. Dissolved aluminium in the Weddell-Scotia Confluence and effect of Al on the dissolution kinetics of biogenic silica

    Energy Technology Data Exchange (ETDEWEB)

    Bennekom, A.J. van; Buma, A.G.J.; Nolting, R.F. (Netherlands Inst. for Sea Research, Den Burg (Netherlands))

    1991-11-01

    In the Scotia and Weddell Seas the concentration of dissolved Al was 1-1.5 nM in ice-free surface waters, up to 3 nM in ice-covered waters and about 2.6 nM in bottom waters. The solubility and the dissolution rate of diatomaceous silica, obtained from net samples and from incubations in the presence or absence of dissolved Al, were inversely related to solid-phase Al/Si ratios. At in situ temperatures, dissolution rates from Antarctic diatoms are higher than those for diatoms from temperature regions. Effects on distribution patterns of silicic acid in the Weddell Sea are discussed. (author). 32 refs.; 3 figs.; 2 tabs.

  9. Spatio-temporal patterns in acoustic presence and distribution of Antarctic blue whales Balaenoptera musculus intermedia in the Weddell Sea

    OpenAIRE

    Thomisch, Karolin; Boebel, Olaf; Clark, CW; Hagen, W.; Spiesecke, Stefanie; Zitterbart, Daniel; Van Opzeeland, Ilse

    2016-01-01

    Distribution and movement patterns of Antarctic blue whales Balaenoptera musculus intermedia at large temporal and spatial scales are still poorly understood. The objective of this study was to explore spatio-temporal distribution patterns of Antarctic blue whales in the Atlantic sector of the Southern Ocean, using passive acoustic monitoring data. Multi-year data were collected between 2008 and 2013 by 11 recorders deployed in the Weddell Sea and along the Greenwich meridian. Antarctic blue ...

  10. Proposal for the establishment of a marine CCAMLR MPA in the Weddell Sea (Antarctica) – First conceptual outline

    OpenAIRE

    Teschke, Katharina; Dorschel, Boris; Gutt, Julian; Hain, Stefan; Hellmer, Hartmut; Jerosch, Kerstin; Knust, Rainer; Kock, Karl-Hermann; Schlüter, Michael; Siegel, Volker; Brey, Thomas

    2013-01-01

    In recent years, CCAMLR member states undertook substantial efforts to designate marine protected areas (MPAs) in the Southern Ocean. While MPA planning for six domains is underway, for three domains CCAMLR member states were asked to take the lead in MPA planning. At the CCAMLR meeting in 2012, the Commission welcomed the offer of Germany to take the lead in developing a Weddell Sea MPA for consideration in 2014. Subsequently, the German Federal Ministry of Food, Agriculture and Consumer Pro...

  11. Scientific background document in support of the development of a CCAMLR MPA in the Weddell Sea (Antarctica) – Version 2014

    OpenAIRE

    Teschke, Katharina; Bester, M. N.; Bornemann, Horst; Brandt, Angelika; Brtnik, Patricia; De Broyer, Claude; Burkhardt, Elke; Dieckmann, Gerhard; Flores, Hauke; Gerdes, Dieter; Griffiths, H. J.; Gutt, Julian; Hain, Stefan; Hellmer, Hartmut; Herata, Heike

    2014-01-01

    Germany intends to present the Scientific Committee the background document that provides the scientific basis for the evaluation of marine protected areas (MPAs) in the Weddell Sea. Please note, that the current state of the background document presents a comprehensive yet incomplete first version concerning chapters that have to be (further) developed or revised. The contents and structure of the document reflect also its main objectives, i.e. (i) to set out the general background and conte...

  12. Taper-seal type metal sealing system and available applications

    Science.gov (United States)

    Kurokouchi, Satoshi; Okabe, Masayuki; Morita, Shinsaku

    2001-01-01

    A conventional disk (flat ring) gasket for ConFlat ® sealing system has been commonly applied to commercially available equipments for ultrahigh vacuum systems. However, its large redundant part which wastes the tightening force makes its handling and seal reliability problematic. We examine a taper-seal type gasket, which is newly designed to improve the inefficiency of ConFlat mechanism using conventional disk gaskets. It is remarked that the obtained seal area on a taper-seal type gasket is 1.6˜3.7 times larger than that of a conventional disk gasket. Our numencal results on stress distributions in a tightened gasket indicate that taper-seal gasket realizes highly stable seal pressure even under a lower tightening torque. High sealing reliability is thus achieved as expected which is mainly due to the wide seal area and stable seal pressure realized even for rather hard gasket material. Taper-seal type gasket also has some practical advantages. The most important of them may be that it enables to construct new edgeless metal sealing systems without a welded heavy flange. Here, edgeless sealing systems are composed of highly flexible incorporating viewports, bellows, feedthroughs, and blank-off covers, as well as any other conventional vacuum components.

  13. Seal system with integral detector

    Science.gov (United States)

    Fiarman, Sidney

    1985-01-01

    There is disclosed a seal system for materials where security is of the essence, such as nuclear materials, which is tamper-indicating, which indicates changes in environmental conditions that evidence attempts to by-pass the seal, which is unique and cost effective, said seal system comprised of a seal where an optical signal is transmitted through a loop, with a detector to read said signal, and one or more additional detectors designed to detect environmental changes, these detectors being operatively associated with the seal so that detection of a break in the optical signal or detection of environmental changes will cause an observable change in the seal.

  14. HMSRP Hawaiian Monk Seal Master Identification Records (seal)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of all individually identified Hawaiian monk seals since 1981. These seals were identified by PSD personnel and cooperating scientists...

  15. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring.

    Science.gov (United States)

    Han, Chuanjun; Zhang, Han; Zhang, Jie

    2015-01-01

    In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficient, and material parameters on sealing performances were discussed. The results show that von Mises stress of the biomimetic sealing ring distributed symmetrically in no-pressure static sealing. The maximum von Mises stress appears on the second bulge of the inner side. High contact stress concentrates on left bulges. Von Mises stress distribution becomes uneven under medium pressure. Both von Mises stress and contact stress increase when precompression, medium pressure, and rubber hardness increase in static sealing. Biomimetic ring can avoid rolling and distortion in reciprocating dynamic seal, and its working life is much longer than O-ring and rectangular ring. The maximum von Mises stress and contact stress increase with the precompression, medium pressure, rubber hardness, and friction coefficient in reciprocating dynamic seal.

  16. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

    Directory of Open Access Journals (Sweden)

    Chuanjun Han

    2015-01-01

    Full Text Available In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficient, and material parameters on sealing performances were discussed. The results show that von Mises stress of the biomimetic sealing ring distributed symmetrically in no-pressure static sealing. The maximum von Mises stress appears on the second bulge of the inner side. High contact stress concentrates on left bulges. Von Mises stress distribution becomes uneven under medium pressure. Both von Mises stress and contact stress increase when precompression, medium pressure, and rubber hardness increase in static sealing. Biomimetic ring can avoid rolling and distortion in reciprocating dynamic seal, and its working life is much longer than O-ring and rectangular ring. The maximum von Mises stress and contact stress increase with the precompression, medium pressure, rubber hardness, and friction coefficient in reciprocating dynamic seal.

  17. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

    Science.gov (United States)

    Han, Chuanjun

    2015-01-01

    In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficient, and material parameters on sealing performances were discussed. The results show that von Mises stress of the biomimetic sealing ring distributed symmetrically in no-pressure static sealing. The maximum von Mises stress appears on the second bulge of the inner side. High contact stress concentrates on left bulges. Von Mises stress distribution becomes uneven under medium pressure. Both von Mises stress and contact stress increase when precompression, medium pressure, and rubber hardness increase in static sealing. Biomimetic ring can avoid rolling and distortion in reciprocating dynamic seal, and its working life is much longer than O-ring and rectangular ring. The maximum von Mises stress and contact stress increase with the precompression, medium pressure, rubber hardness, and friction coefficient in reciprocating dynamic seal. PMID:27019582

  18. Provenance Tracing of Glacial Sediment from the Foundation, Academy, and Recovery Ice Streams, Weddell Sea, Antarctica

    Science.gov (United States)

    Cirone, A.; Brachfeld, S. A.; Cortes, I.; Verhagen, C. M.; Williams, T.; Hemming, S. R.; Licht, K.; van de Flierdt, T.

    2016-12-01

    The Ronne-Filchner Ice Shelf is the second largest ice shelf in Antarctica and drains ice from both West and East Antarctica. This sector has the potential to generate significant sea level rise in the face of global climate change. This project seeks to advance our understanding of ice dynamics by "fingerprinting" ice streams that drain into the Ronne-Filchner Ice Shelf and gain insight into the bedrock composition beneath the Antarctic Ice Sheet. The first step is to develop tracers of glacial debris, which can be used to correlate ice rafted debris in the Weddell Sea with ice streams on land. Till samples were collected from moraines adjacent to the Foundation, Academy, and Recovery ice streams during a December 2014 field season, and marine sediment samples from the ice shelf edge were taken from surface sediment grabs and piston cores from the International Weddell Sea Ocean Expedition. This collaborative project is developing a comprehensive suite of tracers. The ongoing study presented here focuses on bulk elemental compositions, texture and composition of iron-oxide grains, and sediment magnetic properties of the till samples. Till from the northern margin of Recovery ice stream has high Al/Ti ratios (21-22) and high values of the chemical index of alteration (CIA 70 -71). However, till from the southern margin of Recovery ice stream has Al/Ti values of 13-15 and elevated Mn/Al and Fe/Al ratios. Academy till has the highest Al/Ti values (23-24) and the highest Fe/Ti values (9-10), while Foundation ice stream till has a greater range of Al/Ti ratios (15-21) and CIA values (61-70). Iron oxide grains in the coarse silt and sand fraction from both terrestrial and marine samples have been extracted to form polished grain mounts, which will be analyzed for grain texture and geochemistry. Sediment magnetic analyses include magnetic susceptibility, magnetic grain size, and remanence carrying abilities of bulk sediment and individual lithologies represented by the

  19. Static seal for turbine engine

    Science.gov (United States)

    Salazar, Santiago; Gisch, Andrew

    2014-04-01

    A seal structure for a gas turbine engine, the seal structure including first and second components located adjacent to each other and forming a barrier between high and low pressure zones. A seal cavity is defined in the first and second components, the seal cavity extending to either side of an elongated gap extending generally in a first direction between the first and second components. A seal member is positioned within the seal cavity and spans across the elongated gap. The seal member includes first and second side edges extending into each of the components in a second direction transverse to the first direction, and opposing longitudinal edges extending between the side edges generally parallel to the first direction. The side edges include a groove formed therein for effecting a reduction of gas flow around the seal member at the side edges.

  20. Chip seal design and specifications : final report.

    Science.gov (United States)

    2016-12-01

    Chip seals or seal coats, are a pavement preservation method constructed using a layer of asphalt binder that is covered by a uniformly graded aggregate. The benefits of chip seal include: sealing surface cracks, keeping water from penetrating the su...

  1. Direct observation of increasing CO 2 in the Weddell Gyre along the Prime Meridian during 1973-2008

    Science.gov (United States)

    van Heuven, Steven M. A. C.; Hoppema, Mario; Huhn, Oliver; Slagter, Hans A.; de Baar, Hein J. W.

    2011-12-01

    The World Ocean takes up a large portion of the anthropogenic CO 2 emitted into the atmosphere. Determining the resulting increase in dissolved inorganic carbon ( CT, expressed in μmol kg -1) is challenging, particularly in the sub-surface and deep Southern Ocean where the time rate of change of CT (in μmol kg -1 decade -1) is commonly expected to be low. We present a determination of this time trend of CT in a dataset of measurements that spans 35 years comprising 10 cruises in the 1973-2008 period along the 0°-meridian in the Weddell Gyre. The inclusion of many cruises aims to generate results that are more robust than may be obtained by taking the difference between only one pair of cruises, each of which may suffer from errors in accuracy. To further improve consistency between cruises, data were adjusted in order to obtain time-invariant values of CT (and other relevant parameters) over the 35 years in the least ventilated local water body, this comprising the deeper Warm Deep Water (WDW) and upper Weddell Sea Deep Water (WSDW). It is assumed that this normalization procedure will allow trends in CT in the more intensely ventilated water masses to be more clearly observed. Time trends were determined directly in measurements of CT, and alternatively in back-calculated values of preformed CT ( CT0; i.e., the CT of the water at the time that it lost contact with the atmosphere). The determined time trends may be attributed to a combination of natural variability (in hydrography or biogeochemistry) and increased uptake of anthropogenic CO 2 from the atmosphere. In order to separate these natural and anthropogenic components, an analysis of the residuals of a multivariate linear regression (MLR), involving the complete time series of all 10 cruises, was additionally performed. This approach is referred to as the Time Series Residuals (TSR) approach. Using the direct method, the time trends of CT in the WSDW are quite small and non-significant at +0.176±0.321

  2. Four Sided Seal Tester

    Science.gov (United States)

    2009-07-01

    The Center for Advanced Food Technology School of Enviromental and Biological Sciences New Brunswick, NJ 08903 FTR 216 Defense Logistics Agency...specification for four sided seal tester as function of confinement plate distance” The following modifications were issued :  Jul 18, 2007 0013/01

  3. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  4. Gas path seal

    Science.gov (United States)

    Bill, R. C.; Johnson, R. D. (Inventor)

    1979-01-01

    A gas path seal suitable for use with a turbine engine or compressor is described. A shroud wearable or abradable by the abrasion of the rotor blades of the turbine or compressor shrouds the rotor bades. A compliant backing surrounds the shroud. The backing is a yieldingly deformable porous material covered with a thin ductile layer. A mounting fixture surrounds the backing.

  5. Detection of grey seal

    NARCIS (Netherlands)

    van Bleijswijk, J.; Begeman, L.; Witte, H.J.; IJsseldijk, L.L.; Brasseur, S.M.J.M.; Gröne, A.; Leopold, M.F.

    2014-01-01

    DNA was analysed from external wounds on 3 dead harbour porpoises Phocoena phocoena that were stranded in the Netherlands. Puncture wounds as well as the edges of large open wounds were sampled with sterile cotton swabs. With specific primers that target the mtDNA control region of grey seal

  6. Seal for sodium sulfur battery

    Science.gov (United States)

    Topouzian, Armenag; Minck, Robert W.; Williams, William J.

    1980-01-01

    This invention is directed to a seal for a sodium sulfur battery in which the sealing is accomplished by a radial compression seal made on a ceramic component of the battery which separates an anode compartment from a cathode compartment of the battery.

  7. Carnivorous sponges (Cladorhizidae) of the deep Weddell Sea, with descriptions of two new species

    Science.gov (United States)

    Dressler-Allame, Melina; Göcke, Christian; Kersken, Daniel; Plotkin, Alexander; Janussen, Dorte

    2017-03-01

    This paper presents 29 sponges of the family Cladorhizidae Dendy, 1922 sampled at 18 different stations in the Weddell Sea, Antarctic during two expeditions of RV Polarstern, PS61 ANT-XIX/2 ANDEEP 2 in 2002 and PS67 ANT-XXII/3 ANDEEP 3 in 2005. Fourteen species from four genera have been registered - one species of Asbestopluma Topsent, 1901, five species of Chondrocladia Thomson, 1873, three species of Cladorhiza Sars, 1872 and five species of Lycopodina Lundbeck, 1905. Six species are endemics of the Southern Ocean. Four species were previously only known from the areas north of the Antarctic and our records of them are thereby new for this region. Two species of Lycopodina, Lycopodina rhabdostylophora sp. nov. and Lycopodina pediculifera sp. nov., are new to science. Our study has considerably expanded the data on diversity of Cladorhizidae in the Southern Ocean. About 27 cladorhizid species (18-19% of global cladorhizid diversity) are now recorded for this region, of which 56% are endemics.

  8. Distribution patterns of macrozoobenthos: a comparison between the Magellan Region and the Weddell Sea (Antarctic

    Directory of Open Access Journals (Sweden)

    D. Gerdes

    1999-12-01

    Full Text Available The Joint Chilean-German-Italian Magellan Victor Hensen Campaign in October/November 1994 and the Polarstern expedition ANT XIII/4 (May 1996 yielded 207 quantitative multibox corer samples from 11 stations in the Paso Ancho (Magellan Straits, 10 stations in the Beagle Channel, and 15 stations of the shelf and continental slope off the eastern entrance of the Beagle Channel. Mean abundance values in the Magellan Region varied from 1591 Ind. M-2 in the Paso Ancho to 3643 Ind. m-2 in the Beagle Channel and 3983 Ind. m-2 on the shelf; the corresponding biomass values were 96.8 g, 301.6 g, and 119.0 g wet weight m-2 respectively. In terms of org. C the corresponding values are 4.8, 11.4, and 4.6 g m-2. Abundance (3806 Ind. m-2 and biomass (222.6 g wet weight m-2 or 7.3 g C data from the eastern Weddell Sea shelf (Polarstern expeditions ANT VI/3, 1987/88 and ANT VII/4, 1989 are in the same range. The composition of the fauna, however, reveals distinct differences.

  9. Early Pliocene Weddell Sea climate and seasonality reconstructed from bivalves and bryozoans

    Science.gov (United States)

    Williams, M.; Clark, N.; Okamura, B.; Zalasiewicz, J.; Johnson, A.; Leng, M. J.; Smellie, J.; Haywood, A.; Nelson-Laloe, A.; Taylor, P.

    2010-12-01

    Early Pliocene marine cheilostome bryozoans and bivalves are preserved in glacigenic and interglacial marine deposits of James Ross Island and Cockburn Island, northern Antarctic Peninsula. Several different marine bryozoan genera were incorporated into diamictites during Pliocene ice advance(s). Bryozoan zooid-size Mean Annual Range of Temperature (zs-MART) analysis provides estimates of seasonality which suggest annual marine temperatures for the James Ross Island region varied by at least 4°C and possibly by as much as 10°C during Early Pliocene warm intervals (compared with ca 2°C for present day). Coupled with evidence from oxygen isotope data from bivalves, Early Pliocene Weddell Sea warm intervals were evidently much warmer than present, with summer sea temperatures probably exceeding 5°C. Morphological (growth-increment) and oxygen isotope data from bivalves in the marine interglacial Cockburn Island Formation (dated at 4.7 Ma) indicate little or no sea ice present, supporting the theory that Chlamys-like bivalves have retreated from the Antarctic as sea ice increased in the late Pliocene. We demonstrate that bivalve and bryozoan growth-related morphologies, interpreted in conjunction with stable oxygen and carbon isotope data, provide a powerful tool for tracking high latitude climate in the Pliocene.

  10. Unusual diatom layers in upper pleistocene sediments from the northern Weddell Sea

    Science.gov (United States)

    Jordan, R. W.; Priddle, J.; Pudsey, C. J.; Barker, P. F.; Whitehouse, M. J.

    1991-07-01

    A sediment core from Jane Basin, northern Weddell Sea, contains distinct bands, up to 3 cm thick, of well preserved diatom frustules, contrasting with the generally poor preservation of adjacent material. Most notably, the fragile diatom genus Corethron is abundant in the layers and found as whole valves, while in the remainder of the core is rare and valves are broken and corroded. Extrapolation from contemporary data on phytoplankton production and standing crop suggests that the silicon content of the diatom ooze layers is very much greater than could be expected from a single year's phytoplankton production sedimenting from a corresponding area of the water column. Assuming direct, quantitative sedimentation, it would have taken decades to centuries to accumulate 3 cm of diatom ooze. The preservation of these layer indicates that unusual conditions prevailed, so that diatom valves settled through the water column more-or-less unaltered and remained preserved in this state in the sediment. Mass sedimentation of a diatom bloom followed by rapid burial seems the most likely combination of circumstances that could have caused this. It is unlikely that this would have occurred consistently over a long period. Horizontal concentration must have taken place, and this is most likely to have been associated with a physical feature of the water column such as an eddy or "chimney", which entrained phytoplankton biomass from a wide area of the surface mixed layer and caused it to sediment to a smaller area of the seabed.

  11. Gulf and Dilmun Type seals

    DEFF Research Database (Denmark)

    Laursen, Steffen

    2011-01-01

    From around 2100 BC a glyptic tradition emerges in the Arabian Gulf, which is dependant on the well-established schools of the Indus Valley seal cutters. These circular hybrids of classic Harappan seals rapidly became popular amongst the merchants of Dilmun, centered on Bahrain Island. At first...... these Gulf Type‘ seals drew heavily on Indus Valley iconography and Indus script was occasionally employed in a pidgin-like manner. While the earliest circular seals incorporate features from Mesopotamian glyptic only to a lesser extent, this becomes a more important source of inspiration for later Dilmun...... Type seals....

  12. Hermetic Seal Leak Detection Apparatus

    Science.gov (United States)

    Kelley, Anthony R. (Inventor)

    2013-01-01

    The present invention is a hermetic seal leak detection apparatus, which can be used to test for hermetic seal leaks in instruments and containers. A vacuum tight chamber is created around the unit being tested to minimize gas space outside of the hermetic seal. A vacuum inducing device is then used to increase the gas chamber volume inside the device, so that a slight vacuum is pulled on the unit being tested. The pressure in the unit being tested will stabilize. If the stabilized pressure reads close to a known good seal calibration, there is not a leak in the seal. If the stabilized pressure reads closer to a known bad seal calibration value, there is a leak in the seal. The speed of the plunger can be varied and by evaluating the resulting pressure change rates and final values, the leak rate/size can be accurately calculated.

  13. Gas turbine sealing apparatus

    Science.gov (United States)

    Wiebe, David J; Wessell, Brian J; Ebert, Todd; Beeck, Alexander; Liang, George; Marussich, Walter H

    2013-02-19

    A gas turbine includes forward and aft rows of rotatable blades, a row of stationary vanes between the forward and aft rows of rotatable blades, an annular intermediate disc, and a seal housing apparatus. The forward and aft rows of rotatable blades are coupled to respective first and second portions of a disc/rotor assembly. The annular intermediate disc is coupled to the disc/rotor assembly so as to be rotatable with the disc/rotor assembly during operation of the gas turbine. The annular intermediate disc includes a forward side coupled to the first portion of the disc/rotor assembly and an aft side coupled to the second portion of the disc/rotor assembly. The seal housing apparatus is coupled to the annular intermediate disc so as to be rotatable with the annular intermediate disc and the disc/rotor assembly during operation of the gas turbine.

  14. A High-Resolution Model of Water Mass Transformation and Transport in the Weddell Sea

    Science.gov (United States)

    Hazel, J.; Stewart, A.

    2016-12-01

    The ocean circulation around the Antarctic margins has a pronounced impact on the global ocean and climate system. One of these impacts includes closing the global meridional overturning circulation (MOC) via formation of dense Antarctic Bottom Water (AABW), which ventilates a large fraction of the subsurface ocean. AABW is also partially composed of modified Circumpolar Deep Water (CDW), a warm, mid-depth water mass whose transport towards the continent has the potential to induce rapid retreat of marine-terminating glaciers. Previous studies suggest that these water mass exchanges may be strongly influenced by high-frequency processes such as downslope gravity currents, tidal flows, and mesoscale/submesoscale eddy transport. However, evaluating the relative contributions of these processes to near-Antarctic water mass transports is hindered by the region's relatively small scales of motion and the logistical difficulties in taking measurements beneath sea ice.In this study we develop a regional model of the Weddell Sea, the largest established source of AABW. The model is forced by an annually-repeating atmospheric state constructed from the Antarctic Mesoscale Prediction System data and by annually-repeating lateral boundary conditions constructed from the Southern Ocean State Estimate. The model incorporates the full Filchner-Ronne cavity and simulates the thermodynamics and dynamics of sea ice. To analyze the role of high-frequency processes in the transport and transformation of water masses, we compute the model's overturning circulation, water mass transformations, and ice sheet basal melt at model horizontal grid resolutions ranging from 1/2 degree to 1/24 degree. We temporally decompose the high-resolution (1/24 degree) model circulation into components due to mean, eddy and tidal flows and discuss the geographical dependence of these processes and their impact on water mass transformation and transport.

  15. Jurassic high heat production granites associated with the Weddell Sea rift system, Antarctica

    Science.gov (United States)

    Leat, Philip T.; Jordan, Tom A.; Flowerdew, Michael J.; Riley, Teal R.; Ferraccioli, Fausto; Whitehouse, Martin J.

    2018-01-01

    The distribution of heat flow in Antarctic continental crust is critical to understanding continental tectonics, ice sheet growth and subglacial hydrology. We identify a group of High Heat Production granites, intruded into upper crustal Palaeozoic metasedimentary sequences, which may contribute to locally high heat flow beneath the West Antarctic Ice Sheet. Four of the granite plutons are exposed above ice sheet level at Pagano Nunatak, Pirrit Hills, Nash Hills and Whitmore Mountains. A new Usbnd Pb zircon age from Pirrit Hills of 178.0 ± 3.5 Ma confirms earlier Rbsbnd Sr and Usbnd Pb dating and that the granites were emplaced approximately coincident with the first stage of Gondwana break-up and the developing Weddell rift, and 5 m.y. after eruption of the Karoo-Ferrar large igneous province. Aerogeophysical data indicate that the plutons are distributed unevenly over 40,000 km2 with one intruded into the transtensional Pagano Shear Zone, while the others were emplaced within the more stable Ellsworth-Whitmore mountains continental block. The granites are weakly peraluminous A-types and have Th and U abundances up to 60.7 and 28.6 ppm respectively. Measured heat production of the granite samples is 2.96-9.06 μW/m3 (mean 5.35 W/m3), significantly higher than average upper continental crust and contemporaneous silicic rocks in the Antarctic Peninsula. Heat flow associated with the granite intrusions is predicted to be in the range 70-95 mW/m2 depending on the thickness of the high heat production granite layer and the regional heat flow value. Analysis of detrital zircon compositions and ages indicates that the high Th and U abundances are related to enrichment of the lower-mid crust that dates back to 200-299 Ma at the time of the formation of the Gondwanide fold belt and its post-orogenic collapse and extension.

  16. Aft outer rim seal arrangement

    Science.gov (United States)

    Lee, Ching-Pang; Tham, Kok-Mun; Schroeder, Eric; Meeroff, Jamie; Miller, Jr., Samuel R; Marra, John J; Campbell, Christian X

    2015-04-28

    An outer rim seal arrangement (10), including: an annular rim (70) centered about a longitudinal axis (30) of a rotor disc (31), extending fore and having a fore-end (72), an outward-facing surface (74), and an inward-facing surface (76); a lower angel wing (62) extending aft from a base of a turbine blade (22) and having an aft end (64) disposed radially inward of the rim inward-facing surface to define a lower angel wing seal gap (80); an upper angel wing (66) extending aft from the turbine blade base and having an aft end (68) disposed radially outward of the rim outward-facing surface to define a upper angel wing seal gap (80, 82); and guide vanes (100) disposed on the rim inward-facing surface in the lower angel wing seal gap. Pumping fins (102) may be disposed on the upper angel wing seal aft end in the upper angel wing seal gap.

  17. Development of helicopter engine seals

    Science.gov (United States)

    Lynwander, P.

    1973-01-01

    An experimental evaluation of main shaft seals for helicopter gas turbine engines was conducted with shaft speeds to 213 m/s(700 ft/sec), air pressures to 148 N/sq cm (215 psia), and air temperatures to 645 K (675 F). Gas leakage test results indicate that conventional seals will not be satisfactory for high-pressure sealing because of excessive leakage. The self-acting face seal, however, had significantly lower leakage and operated with insignificant wear during a 150-hour endurance test at sliding speeds to 145 m/s (475 ft/sec), air pressures to 124 N/sq cm (180 psia), and air temperatures to 408 K (275 F). Wear measurements indicate that noncontact operation was achieved at shaft speeds of 43,000 rpm. Evaluation of the self-acting circumferential seal was inconclusive because of seal dimensional variations.

  18. Fiber Optic Safeguards Sealing System

    Science.gov (United States)

    1978-01-01

    an intergrity check of a seal than to photograph the seal’s fingerprints and to match positive/negative overlays. The seal identification time and...INSTALLATIONS, LOGISTICS fi FINANCIAL MANAGEMENT) DEPARTMENT OF THE ARMY WASHINGTON, DC 20310 ATTN OASA-IL&FM-DSM&T, E. A. ORSINI ATTK OASA-IL&FM, COL K...W, GOOCH OFFICE, DEPUTY CHIEF OF STAFF FOR LOGISTICS DEPARTMENT OF THE ARMY WASHINGTON, DC 20310 ATTN DALO-SMS, T. C. UECKERT OFFICE, DEPUTY

  19. Fluidtight Seal for a Container

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Edward F.

    1999-03-31

    A fluidtight seal for a container is formed by abutting a metal ring with a step machined in a convexo-concave container closure device and inserting this assembly into an open end of the container. Under compressive force, the closure device deforms causing the metal ring to pivot about the step on the closure device and interact with symmetrically tapered inner walls of the container to form a fluidtight seal between the container and the closure device. The compressive force is then withdrawn without affecting the fluidtight characteristic of the seal. A destructive force against the container closure device is necessary to destroy the fluidtight seal.

  20. On the forcing mechanisms of mesocyclones in the eastern Weddell Sea region, Antarctica: Process studies using a mesoscale numerical model

    Directory of Open Access Journals (Sweden)

    Thomas Klein

    2001-04-01

    Full Text Available Development mechanisms of Antarctic mesocyclones in the eastern Weddell Sea area are examined by means of simulations with a mesoscale model using different idealized initial conditions. In one of the experiments, a mesocyclone develops over an area of open water close to the coast of the Antarctic continent. The forcing mechanisms of this mesocyclogenesis are investigated by means of sensitivity studies in which certain physical processes and the relevance of the surface conditions topography, sea surface temperature and sea ice coverage are examined. The sensitivity experiments show that the simulated mesocyclone is forced by an interaction of several forcing mechanisms at different stages of the development rather than by a single mechanism. The topography of the eastern Weddell Sea region and the summertime coastal polynia are shown to be of great importance for the mesocyclogenesis. A suitable synoptic-scale flow is necessary to support the katabatic flow over the sloped ice sheet, and to enhance the generation of cyclonic vorticity due to vertical stretching for the initial mesocyclogenesis. The diabatic process of the convergence of the sensible and latent heat fluxes in the boundary layer over the coastal polynia then becomes the dominant forcing mechanism for the further development of the mesocyclone.

  1. ABUNDANCE OF CRYPTOPHYCEAE AND CHLOROPHYLL B-CONTAINING ORGANISMS IN THE WEDDELL-SCOTIA CONFLUENCE AREA IN THE SPRING OF 1988

    NARCIS (Netherlands)

    BUMA, AGJ; GIESKES, WWC; THOMSEN, HA

    During a cruise in the Weddell-Scotia Confluence area (EPOS Leg 2: November-January 1988/1989) nanophytoplankton composition was determined by employing taxon-specific pigment measurements with HPLC. The biomass of the most important components was estimated by using specific pigment ratios measured

  2. Decline of deep and bottom water ventilation and slowing down of anthropogenic carbon storage in the Weddell Sea, 1984-2011

    NARCIS (Netherlands)

    Huhn, Oliver; Rhein, Monika; Hoppema, Mario; van Heuven, Steven

    We use a 27 year long time series of repeated transient tracer observations to investigate the evolution of the ventilation time scales and the related content of anthropogenic carbon (C-ant) in deep and bottom water in the Weddell Sea. This time series consists of chlorofluorocarbon (CFC)

  3. INFLUENCE OF PHYSICAL AND BIOLOGICAL PROCESSES ON THE CONCENTRATION OF O-2 AND CO2 IN THE ICE-COVERED WEDDELL SEA IN THE SPRING OF 1988

    NARCIS (Netherlands)

    BOUQUEGNEAU, JM; GIESKES, WWC; KRAAY, GW; LARSSON, AM

    In October and November 1988, measurements of oxygen and total dissolved inorganic carbon (TCO2) concentrations were made in the northwestern Weddell Sea to the south and north of the marginal ice edge, in order to estimate the relative importance, regarding their variations, of both biological

  4. Seal between metal and ceramic conduits

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, Richard Paul; Tentarelli, Stephen Clyde

    2015-02-03

    A seal between a ceramic conduit and a metal conduit of an ion transport membrane device consisting of a sealing surface of ceramic conduit, a sealing surface of ceramic conduit, a single gasket body, and a single compliant interlayer.

  5. leonina and Cape fur seals Arctocephalus pusillus

    African Journals Online (AJOL)

    Namibia, was observed catching, killing and attempting copulation with female fur seals Arc- tocephalus pusillus, as well as catching and occasionally kill- ing fur seal pups and participating in territorial disputes with fur seal bulls. Previous and ...

  6. Toward an Improved Hypersonic Engine Seal

    Science.gov (United States)

    Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; DeMange,Jeffrey J.; Taylor, Shawn C.

    2003-01-01

    High temperature, dynamic seals are required in advanced engines to seal the perimeters of movable engine ramps for efficient, safe operation in high heat flux environments at temperatures from 2000 to 2500 F. Current seal designs do not meet the demanding requirements for future engines, so NASA s Glenn Research Center (GRC) is developing advanced seals to overcome these shortfalls. Two seal designs and two types of seal preloading devices were evaluated in a series of compression tests at room temperature and 2000 F and flow tests at room temperature. Both seals lost resiliency with repeated load cycling at room temperature and 2000 F, but seals with braided cores were significantly more flexible than those with cores composed of uniaxial ceramic fibers. Flow rates for the seals with cores of uniaxial fibers were lower than those for the seals with braided cores. Canted coil springs and silicon nitride compression springs showed promise conceptually as potential seal preloading devices to help maintain seal resiliency.

  7. Face-Sealing Butterfly Valve

    Science.gov (United States)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  8. High temperature autoclave vacuum seals

    Science.gov (United States)

    Hoffman, J. R.; Simpson, W. G.; Walker, H. M.

    1971-01-01

    Aluminum sheet forms effective sealing film at temperatures up to 728 K. Soft aluminum wire rings provide positive seal between foil and platen. For applications at temperatures above aluminum's service temperature, stainless steel is used as film material and copper wire as sealant.

  9. Conical O-ring seal

    Science.gov (United States)

    Chalfant, Jr., Gordon G.

    1984-01-01

    A shipping container for radioactive or other hazardous materials which has a conical-shaped closure containing grooves in the conical surface thereof and an O-ring seal incorporated in each of such grooves. The closure and seal provide a much stronger, tighter and compact containment than with a conventional flanged joint.

  10. Asteroids, ophiuroids and holothurians from the southeastern Weddell Sea (Southern Ocean

    Directory of Open Access Journals (Sweden)

    Julian Gutt

    2014-08-01

    Full Text Available Until the early 1980s, the composition and distribution of the asteroid (starfish, ophiuroid (brittle star and holothurian (sea cucumber bottom fauna of the southeastern Weddell Sea was virtually unknown. This southernmost part of the Atlantic sector of the Southern Ocean is a typical high-latitude Antarctic region located in the circumpolar permanent pack-ice zone. It became accessible for large-scale scientific surveys only through the availability of modern ice-breaking research vessels, such as the German RV “Polarstern”. Here, we describe a dataset of the faunal composition and abundance of starfish, brittle star and sea cucumber assemblages in this area, based on collections from trawl catches carried out during three “Polarstern” cruises in 1983, 1984 and 1985. The set comprises a total of 4,509 records of abundances of 35 asteroid species (with a total of 2,089 specimens and 38 ophiuroid species (with a total of 18,484 specimens from 34 stations, as well as of 66 holothurian species (with a total of 20,918 specimens from 59 stations including zero-abundances (absences. A synthesizing zoogeographical community analysis confirms the presence of three distinct assemblages of asteroids, ophiuroids, and holothurians with highest species richness on the eastern shelf. Overall, starfishes, brittle stars and sea cucumbers were present at all sites investigated in the study area but composition and abundance of asterozoan (asteroids and ophiuroids together and holothurian fauna varied considerably. A synthesizing zoogeographical community analysis confirms the presence of three distinct assemblages of asteroids, ophiuroids, and holothurians with highest species richness on the eastern shelf. In the case of asterozoans, water depth and latitude seemed to be the most important drivers of assemblage distribution and composition. One of the holothurian assemblages was part of the rich macrozoobenthic community dominated by a diverse and

  11. Asteroids, ophiuroids and holothurians from the southeastern Weddell Sea (Southern Ocean).

    Science.gov (United States)

    Gutt, Julian; Piepenburg, Dieter; Voß, Joachim

    2014-01-01

    Until the early 1980s, the composition and distribution of the asteroid (starfish), ophiuroid (brittle star) and holothurian (sea cucumber) bottom fauna of the southeastern Weddell Sea was virtually unknown. This southernmost part of the Atlantic sector of the Southern Ocean is a typical high-latitude Antarctic region located in the circumpolar permanent pack-ice zone. It became accessible for large-scale scientific surveys only through the availability of modern ice-breaking research vessels, such as the German RV "Polarstern". Here, we describe a dataset of the faunal composition and abundance of starfish, brittle star and sea cucumber assemblages in this area, based on collections from trawl catches carried out during three "Polarstern" cruises in 1983, 1984 and 1985. The set comprises a total of 4,509 records of abundances of 35 asteroid species (with a total of 2,089 specimens) and 38 ophiuroid species (with a total of 18,484 specimens) from 34 stations, as well as of 66 holothurian species (with a total of 20,918 specimens) from 59 stations including zero-abundances (absences). A synthesizing zoogeographical community analysis confirms the presence of three distinct assemblages of asteroids, ophiuroids, and holothurians with highest species richness on the eastern shelf. Overall, starfishes, brittle stars and sea cucumbers were present at all sites investigated in the study area but composition and abundance of asterozoan (asteroids and ophiuroids together) and holothurian fauna varied considerably. A synthesizing zoogeographical community analysis confirms the presence of three distinct assemblages of asteroids, ophiuroids, and holothurians with highest species richness on the eastern shelf. In the case of asterozoans, water depth and latitude seemed to be the most important drivers of assemblage distribution and composition. One of the holothurian assemblages was part of the rich macrozoobenthic community dominated by a diverse and abundant epifauna, mainly

  12. Airfoil seal system for gas turbine engine

    Science.gov (United States)

    None, None

    2013-06-25

    A turbine airfoil seal system of a turbine engine having a seal base with a plurality of seal strips extending therefrom for sealing gaps between rotational airfoils and adjacent stationary components. The seal strips may overlap each other and may be generally aligned with each other. The seal strips may flex during operation to further reduce the gap between the rotational airfoils and adjacent stationary components.

  13. Aerodynamic seals for rotary machine

    Science.gov (United States)

    Bidkar, Rahul Anil; Cirri, Massimiliano; Thatte, Azam Mihir; Williams, John Robert

    2016-02-09

    An aerodynamic seal assembly for a rotary machine includes multiple sealing device segments disposed circumferentially intermediate to a stationary housing and a rotor. Each of the segments includes a shoe plate with a forward-shoe section and an aft-shoe section having multiple labyrinth teeth therebetween facing the rotor. The sealing device segment also includes multiple flexures connected to the shoe plate and to a top interface element, wherein the multiple flexures are configured to allow the high pressure fluid to occupy a forward cavity and the low pressure fluid to occupy an aft cavity. Further, the sealing device segments include a secondary seal attached to the top interface element at one first end and positioned about the flexures and the shoe plate at one second end.

  14. Turbine and Structural Seals Team Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Seals Team Facilities conceive, develop, and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. Current projects include...

  15. Rim seal arrangement having pumping feature

    Science.gov (United States)

    Lee, Ching-Pang; Myers, Caleb

    2017-04-25

    A rim seal arrangement for a gas turbine engine includes a first seal face on a rotor component, and a second seal face on a stationary annular rim centered about a rotation axis of the rotor component. The second seal face is spaced from the first seal face along an axial direction to define a seal gap. The seal gap is located between a radially outer hot gas path and a radially inner rotor cavity. The first seal face has a plurality of circumferentially spaced depressions, each having a depth in an axial direction and extending along a radial extent of the first seal face. The depressions influence flow in the seal gap such that during rotation of the rotor component, fluid in the seal gap is pumped in a radially outward direction to prevent ingestion of a gas path fluid from the hot gas path into the rotor cavity.

  16. Physical and chemical data collected using bottle casts from the GENERAL SAN MARTIN in the Scotia Sea and Weddell Sea from 14 December 1963 to 11 January 1964 (NODC Accession 0000791)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and chemical data were collected using bottle casts in the Scotia Sea and Weddell Sea from the GENERAL SAN MARTIN. Data were collected from 14 December 1963...

  17. Turbidity, SOLAR RADIATION - ATMOSPHERIC and other data from NATHANIEL B. PALMER, ICE ISLANDS and AKADEMIK FYODOROV in the Weddell Sea from 1992-02-02 to 1992-06-18 (NODC Accession 9500052)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Conductivity, Temperature and Depth (CTD) and Rosette Bottle sampling was done from helicopter, ship, and ice island. The data were collected in Weddell Sea as...

  18. Climatología de la variabilidad espacial de la concentración de hielo en los mares de Bellingshausen, Amundsen y Weddell Climatology of sea ice concentration spatial variability over Bellingshausen, Amundsen and Weddell Seas

    Directory of Open Access Journals (Sweden)

    Rosa H. Compagnucci

    2005-12-01

    Full Text Available En el presente trabajo se han obtenido los patrones espaciales más frecuentes de los campos de anomalías de concentración de hielo marino (ACHM en los mares de Amundsen, Bellingshausen y Weddell a partir de los valores medios mensuales de concentración de hielo marino provistos por la NASA Goddard Space Flight Center derivados del Scanning Multichannel Microwave Radiometer y Special Sensor Microwave/Imager para el período 1979 al 2000. Haciendo uso de la técnica de análisis de Componentes Principales (CPs en modo-T rotadas Varimax, se obtienen seis CPs. Por lo tanto, se obtienen un total de 12 patrones con seis en modo directo (ACHM del mismo signo que la CP y seis en inverso (ACHM de signo opuesto a la CP, que clasifican el 95,5% de los campos mensuales. Tres CPs describen los casos más frecuentes de inviernoprimavera (período con mayor concentración y expansión del hielo marino y tres CPs corresponden a verano-otoño (menor concentración y retracción del campo de hielo. La primera y segunda CP representan situaciones de invierno y primavera. La segunda componente está rotada 30° en sentido horario con respecto a la primer componente y ambas presentan anomalías dipolares entre los mares a ambos lados de la península Antártica. Estas dos componentes presentan una recurrencia de aproximadamente 4 años en los que alternativamente el exterior del mar de Weddell tiene condiciones de hielo marino sobre lo normal cuando en el norte del mar de Amundsen las anomalías son negativas y viceversa. La condición más frecuente y con una recurrencia anual de verano-otoño (3ºCP también es bipolar pero entre el interior del Weddell y la región del Amundsen-Bellingshausen costera por ser la región donde se presenta el hielo en esaépoca del año. Las componentes 4º, 5º y 6º refieren a condiciones de ACHM diferentes y no descriptas en la literatura. Por otra parte, las CPs de verano-otoño, fundamentales para la navegación ant

  19. 9 CFR 381.98 - Official seal.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such mark...

  20. 36 CFR 901.6 - Seal.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Seal. 901.6 Section 901.6... CORPORATION § 901.6 Seal. The Corporation may adopt a corporate seal which shall have the name of the Corporation and year of incorporation printed upon it. The seal may be used by causing it or a facsimile...

  1. 39 CFR 3002.3 - Official seal.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Official seal. 3002.3 Section 3002.3 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL ORGANIZATION § 3002.3 Official seal. (a) Authority. The Seal described in this section is hereby established as the official seal of the Postal Rate Commission...

  2. 7 CFR 29.34 - Sample seal.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.34 Sample seal. A seal approved by the Director for sealing official...

  3. 14 CFR 65.133 - Seal.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press. After...

  4. 7 CFR 29.35 - Lot seal.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.35 Lot seal. A seal approved by the Director for sealing lots of...

  5. Alaska Harbor Seal Glacial Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Floating glacial ice serves as a haul-out substrate for a significant number (10-15%) of Alaskan harbor seals, and thus surveying tidewater glacial fjords is an...

  6. Northern Fur Seal Food Habits

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains food habits samples, usually scats, collected opportunistically on northern fur seal rookeries and haulouts in Alaska from 1987 to present....

  7. Seal testing of large diameter rocket motors

    Science.gov (United States)

    Moore, N. B.; Hellums, John W.; Bechtel, Thomas; Kittredge, Ken; Crossfield, Craig

    1991-01-01

    This investigative program examines leakage testing of elastomeric O-ring seals for a solid rocket casing and provides direction towards an improved nondestructive postassembly test. It also details test equipment for the Space Shuttle systems solid rocket boosters (SRB). The results are useful to designers of hardware for pressure containment vessels which use O-ring seals. Using several subscale seal and groove configuration test fixtures equipped with either two or three O-ring seals in series, seal integrity is investigated with both a pressure decay and flowmeter methods. Both types of test equipment adequately detect the practical range of expected seal leak rates of 1 to 0.0001 sccs. The flowmeter leak test equipment appears to reduce testing time substantially. Limited seal leakage testing is performed on full-sized rocket motor segment seals, a pre-Challenger short stack, providing comparison of bore seals to test specimen bore and face seals. The conclusions are that seal reliability, verified via a performance pressure test, can be affected by temperature, quantity of grease, test pressure, and seal pressure load direction. Potential seal failure scenarios including contamination, seal damage, and sealing surface damage are discussed. Recommendations are made for an improved test procedure.

  8. Modification of the deep salinity-maximum in the Southern Ocean by circulation in the Antarctic Circumpolar Current and the Weddell Gyre

    Science.gov (United States)

    Donnelly, Matthew; Leach, Harry; Strass, Volker

    2017-07-01

    The evolution of the deep salinity-maximum associated with the Lower Circumpolar Deep Water (LCDW) is assessed using a set of 37 hydrographic sections collected over a 20-year period in the Southern Ocean as part of the WOCE/CLIVAR programme. A circumpolar decrease in the value of the salinity-maximum is observed eastwards from the North Atlantic Deep Water (NADW) in the Atlantic sector of the Southern Ocean through the Indian and Pacific sectors to Drake Passage. Isopycnal mixing processes are limited by circumpolar fronts, and in the Atlantic sector, this acts to limit the direct poleward propagation of the salinity signal. Limited entrainment occurs into the Weddell Gyre, with LCDW entering primarily through the eddy-dominated eastern limb. A vertical mixing coefficient, κV of (2.86 ± 1.06) × 10-4 m2 s-1 and an isopycnal mixing coefficient, κI of (8.97 ± 1.67) × 102 m2 s-1 are calculated for the eastern Indian and Pacific sectors of the Antarctic Circumpolar Current (ACC). A κV of (2.39 ± 2.83) × 10-5 m2 s-1, an order of magnitude smaller, and a κI of (2.47 ± 0.63) × 102 m2 s-1, three times smaller, are calculated for the southern and eastern Weddell Gyre reflecting a more turbulent regime in the ACC and a less turbulent regime in the Weddell Gyre. In agreement with other studies, we conclude that the ACC acts as a barrier to direct meridional transport and mixing in the Atlantic sector evidenced by the eastward propagation of the deep salinity-maximum signal, insulating the Weddell Gyre from short-term changes in NADW characteristics.

  9. Further Investigations of Hypersonic Engine Seals

    Science.gov (United States)

    Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; DeMange, Jeffrey J.

    2004-01-01

    Durable, flexible sliding seals are required in advanced hypersonic engines to seal the perimeters of movable engine ramps for efficient, safe operation in high heat flux environments at temperatures of 2000 to 2500 F. Current seal designs do not meet the demanding requirements for future engines, so NASA's Glenn Research Center is developing advanced seals and preloading devices to overcome these shortfalls. An advanced ceramic wafer seal design and two silicon nitride compression spring designs were evaluated in a series of compression, scrub, and flow tests. Silicon nitride wafer seals survived 2000 in. (50.8 m) of scrubbing at 2000 F against a silicon carbide rub surface with no chips or signs of damage. Flow rates measured for the wafers before and after scrubbing were almost identical and were up to 32 times lower than those recorded for the best braided rope seal flow blockers. Silicon nitride compression springs showed promise conceptually as potential seal preload devices to help maintain seal resiliency.

  10. Harbour seals (Phoca vitulina and rehabilitation

    Directory of Open Access Journals (Sweden)

    Nynke Osinga

    2010-09-01

    Full Text Available Throughout the past few decades, rehabilitation of seals has become an activity that is anchored in the present day society of many countries. Seals are primarily rehabilitated to help individual animals in distress. At the same time, the release of seals which would have otherwise died can be considered as a contribution to the population. Most rehabilitated seals are animals under one year of age. They are mainly orphans, weaned seals with complications and seals with a parasiticbronchopneumonia. For the optimal handling of seals and their diseases, centralised operations with quality standards are essential. Rehabilitation provides an instrument to monitor the health of the seal population and its ecosystem. Changes in stranding trends or the appearance of new diseases can be monitored. Moreover, rehabilitation is important to show the general public thestate of the marine environment. In the Netherlands there is significant social support for the rehabilitation of seals. Experience obtained with seal care is of importance in countries where urgent help of threatened seal species is required. Here individual seals are also ambassadors to raise support for the protection of this species in general. Given that the anthropogenic impact on the seals and their environment is extensive in the Wadden Sea, rehabilitation centres can compensate the consequences of this impact on individual seals as well as the population as a whole.

  11. Turbine interstage seal with self-balancing capability

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Jacob A; Jones, Russell B; Sexton, Thomas D

    2017-09-26

    An interstage seal for a turbine of a gas turbine engine, the interstage seal having a seal carrier with an axial extending seal tooth movable with a stator of the engine, and a rotor with a seal surface that forms the interstage seal with the seal tooth, where a magnetic force produced by two magnets and a gas force produced by a gas pressure acting on the seal carrier forms a balancing force to maintain a close clearance of the seal without the seal tooth contacting the rotor seal surfaces during engine operation. In other embodiments, two pairs of magnets produce first and second magnetic forces that balance the seal in the engine.

  12. Gas Path Sealing in Turbine Engines

    Science.gov (United States)

    Ludwig, L. P.

    1978-01-01

    A survey of gas path seals is presented with particular attention given to sealing clearance effects on engine component efficiency. The effects on compressor pressure ratio and stall margin are pointed out. Various case-rotor relative displacements, which affect gas path seal clearances, are identified. Forces produced by nonuniform sealing clearances and their effect on rotor stability are discussed qualitatively, and recent work on turbine-blade-tip sealing for high temperature is described. The need for active clearance control and for engine structural analysis is discussed. The functions of the internal-flow system and its seals are reviewed.

  13. Cryogenic Flange and Seal Evaluation

    Science.gov (United States)

    Ramirez, Adrian

    2014-01-01

    The assembly of flanges, seals, and pipes are used to carry cryogenic fluid from a storage tank to the vehicle at launch sites. However, after a certain amount of cycles these raised face flanges with glass-filled Teflon gaskets have been found to have torque relaxation and are as a result susceptible to cryogenic fluid leakage if not re-torqued. The intent of this project is to identify alternate combinations of flanges and seals which may improve thermal cycle performance and decrease re-torque requirements. The general approach is to design a test fixture to evaluate leak characteristics between spiral and concentric serrations and to test alternate flange and seal combinations. Due to insufficient time, it was not possible to evaluate these different types of combinations for the combination that improved thermal cycle performance the most. However, the necessary drawings for the test fixture were designed and assembled along with the collection of the necessary parts.

  14. Mechanical seal with textured sidewall

    Science.gov (United States)

    Khonsari, Michael M.; Xiao, Nian

    2017-02-14

    The present invention discloses a mating ring, a primary ring, and associated mechanical seal having superior heat transfer and wear characteristics. According to an exemplary embodiment of the present invention, one or more dimples are formed onto the cylindrical outer surface of a mating ring sidewall and/or a primary ring sidewall. A stationary mating ring for a mechanical seal assembly is disclosed. Such a mating ring comprises an annular body having a central axis and a sealing face, wherein a plurality of dimples are formed into the outer circumferential surface of the annular body such that the exposed circumferential surface area of the annular body is increased. The texture added to the sidewall of the mating ring yields superior heat transfer and wear characteristics.

  15. Sealed source peer review plan

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, Alexander [Los Alamos National Laboratory; Leonard, Lee [RETIRED; Burns, Ron [CONTRACTOR

    2009-01-01

    Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR {section} 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements

  16. Stabilizing geometry for hydrodynamic rotary seals

    Science.gov (United States)

    Dietle, Lannie L.; Schroeder, John E.

    2010-08-10

    A hydrodynamic sealing assembly including a first component having first and second walls and a peripheral wall defining a seal groove, a second component having a rotatable surface relative to said first component, and a hydrodynamic seal comprising a seal body of generally ring-shaped configuration having a circumference. The seal body includes hydrodynamic and static sealing lips each having a cross-sectional area that substantially vary in time with each other about the circumference. In an uninstalled condition, the seal body has a length defined between first and second seal body ends which varies in time with the hydrodynamic sealing lip cross-sectional area. The first and second ends generally face the first and second walls, respectively. In the uninstalled condition, the first end is angulated relative to the first wall and the second end is angulated relative to the second wall. The seal body has a twist-limiting surface adjacent the static sealing lip. In the uninstalled condition, the twist-limiting surface is angulated relative to the peripheral wall and varies along the circumference. A seal body discontinuity and a first component discontinuity mate to prevent rotation of the seal body relative to the first component.

  17. Investigation of the causes of the longitudinal variation of the electron density in the Weddell Sea Anomaly

    Science.gov (United States)

    Richards, P. G.; Meier, R. R.; Chen, Shih-Ping; Drob, D. P.; Dandenault, P.

    2017-06-01

    This paper investigates and quantifies the causes of the Weddell Sea Anomaly (WSA), a region near the tip of South America extending from approximately 30° to 120°W geographic longitude and 50° to 75°S geographic latitude at solar minimum between 2007 and 2010. This region is unusual because the midnight peak electron density exceeds the midday peak electron density in summer. This study is far more quantitative than previous studies because, unlike other models, it assimilates selected data parameters to constrain a physical model in order to investigate other aspects of the data. It is shown that the commonly accepted explanation that the WSA is related to the magnetic field declination and inclination effects on the neutral wind does not explain the longitudinal variation of the electron density. Rather, longitudinal changes in the neutral winds and neutral densities are the most likely explanation for the WSA. These longitudinal wind and density changes are attributed to the varying latitudinal distance from the auroral zone energy input. No contributions from the plasmasphere or other sources are required. Furthermore, it is shown that a widely used empirical thermosphere density model overestimates the longitudinal changes in the WSA region.type="synopsis">type="main">Plain Language SummaryThis paper investigates and quantifies the causes of the Weddell Sea Anomaly (WSA), a region near the tip of South America extending from approximately 30° to 120°W geographic longitude and 50° to 75°S geographic latitude at solar minimum between 2007 and 2010. This region is unusual because the midnight peak electron density exceeds the midday peak electron density in summer. This study is far more quantitative than previous studies because, unlike other models, it assimilates selected data parameters to constrain a physical model in order to investigate other aspects of the data. It is shown that the commonly accepted explanation that the WSA is related to the

  18. Seabed images from Southern Ocean shelf regions off the northern Antarctic Peninsula and in the southeastern Weddell Sea

    Science.gov (United States)

    Piepenburg, Dieter; Buschmann, Alexander; Driemel, Amelie; Grobe, Hannes; Gutt, Julian; Schumacher, Stefanie; Segelken-Voigt, Alexandra; Sieger, Rainer

    2017-07-01

    Recent advances in underwater imaging technology allow for the gathering of invaluable scientific information on seafloor ecosystems, such as direct in situ views of seabed habitats and quantitative data on the composition, diversity, abundance, and distribution of epibenthic fauna. The imaging approach has been extensively used within the research project DynAMo (Dynamics of Antarctic Marine Shelf Ecosystems) at the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research Bremerhaven (AWI), which aimed to comparatively assess the pace and quality of the dynamics of Southern Ocean benthos. Within this framework, epibenthic spatial distribution patterns have been comparatively investigated in two regions in the Atlantic sector of the Southern Ocean: the shelf areas off the northern tip of the Antarctic Peninsula, representing a region with above-average warming of surface waters and sea-ice reduction, and the shelves of the eastern Weddell Sea as an example of a stable high-Antarctic marine environment that is not (yet) affected by climate change. The AWI Ocean Floor Observation System (OFOS) was used to collect seabed imagery during two cruises of the German research vessel Polarstern, ANT-XXIX/3 (PS81) to the Antarctic Peninsula from January to March 2013 and ANT-XXXI/2 (PS96) to the Weddell Sea from December 2015 to February 2016. Here, we report on the image and data collections gathered during these cruises. During PS81, OFOS was successfully deployed at a total of 31 stations at water depths between 29 and 784 m. At most stations, series of 500 to 530 pictures ( > 15 000 in total, each depicting a seabed area of approximately 3.45 m2 or 2.3 × 1.5 m) were taken along transects approximately 3.7 km in length. During PS96, OFOS was used at a total of 13 stations at water depths between 200 and 754 m, yielding series of 110 to 293 photos (2670 in total) along transects 0.9 to 2.6 km in length. All seabed images taken during the two cruises

  19. Self-Sealing Cryogenic Fitting

    Science.gov (United States)

    Jia, Lin Xiang; Chow, Wen Lung; Moslemian, Davood; Lin, Gary; Melton, Greg

    1994-01-01

    Self-sealing fitting for cryogenic tubes remains free of leakage from room temperature to liquid-helium temperature even at internal pressure as high as 2.7 MPa. Fitting comprises parts made of materials with different coefficients of thermal expansion to prevent leakage gaps from forming as temperature decreases. Consists of coupling nut, two flared tube ends, and flared O-ring spacer. Spacer contracts more than tube ends do as temperature decreases. This greater contraction seals tube ends more tightly, preventing leakage.

  20. HMSRP Hawaiian Monk Seal Telemetry Tag Deployments

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  1. HMSRP Hawaiian Monk Seal Argos Location Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with satellite...

  2. Seal Apparatus and Methods to Manufacture Thereof

    Science.gov (United States)

    Richard, James A. (Inventor)

    2013-01-01

    In some implementations, apparatus and methods are provided through which a dynamic cryogenic seal is manufactured. In some implementations, the seal includes a retainer and a spring-seal assembly, the assembly being comprised of a main spring housing and fluorine-containing polymer seals. In some implementations, either a radial seal, or an axial (or "piston seal") is provided. In some implementations, methods of manufacturing the dynamic cryogenic seal are also provided. In some implementations, the methods include assembling the components while either heated or cooled, taking advantage of thermal expansion and contraction, such that there is a strong interference fit between the components at room temperature. In some implementations, this process ensures that the weaker fluorine-containing polymer seal is forced to expand and contract with the stronger retainer and spring and is under constant preload. In some implementations, the fluorine-containing polymer is therefore fluidized and retained, and can not lift off.

  3. HMSRP Hawaiian Monk Seal Handling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

  4. HMSRP Hawaiian Monk Seal Crittercam video

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  5. 7 CFR 330.110 - Seals.

    Science.gov (United States)

    2010-01-01

    ... OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS... inspector. (c) Notice of sealing. When an inspector seals any opening, product or article, he shall explain...

  6. Legacy HMSRP Hawaiian Monk Seal Ultrasound Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ultrasounds measuring the condition of juvenile seals at Laysan Island during 2009-2010, collected when seals were handled as part of the De-Worming Project

  7. Film riding seals for rotary machines

    Science.gov (United States)

    Bidkar, Rahul Anil; Sarawate, Neelesh Nandkumar; Wolfe, Christopher Edward; Ruggiero, Eric John; Raj Mohan, Vivek Raja

    2017-03-07

    A seal assembly for a rotary machine is provided. The seal assembly includes multiple sealing device segments disposed circumferentially intermediate to a stationary housing and a rotor. Each of the segments includes a shoe plate with a forward-shoe section and an aft-shoe section having one or more labyrinth teeth therebetween facing the rotor. The sealing device includes a stator interface element having a groove or slot for allowing disposal of a spline seal for preventing segment leakages. The sealing device segment also includes multiple bellow springs or flexures connected to the shoe plate and to the stator interface element. Further, the sealing device segments include a secondary seal integrated with the stator interface element at one end and positioned about the multiple bellow springs or flexures and the shoe plate at the other end.

  8. Legacy HMSRP Hawaiian Monk Seals Observers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set documents observers that have collected monk seal data as part of the ongoing monk seal population assessment efforts by PSD personnel and cooperating...

  9. HMSRP Hawaiian Monk Seal Entanglement data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains records of all entanglements of Hawaiian monk seals in marine debris. The data set comprises records of seals entangled by derelict fishing...

  10. 39 CFR 2.4 - Seal.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Seal. 2.4 Section 2.4 Postal Service UNITED STATES... (ARTICLE II) § 2.4 Seal. (a) The Seal of the Postal Service is filed by the Board in the Office of the Secretary of State, and is required by 39 U.S.C. 207 to be judicially noticed. The Seal shall be in the...

  11. Compensating For Shrinkage In A Cryogenic Seal

    Science.gov (United States)

    Hill, Arnold E.

    1993-01-01

    Proposed design for seals in liquid-hydrogen plumbing eliminates leaks caused by contraction of seals at low operating temperature. Each seal consists of rubber, polytetrafluorethylene, or lead O-ring including hollow core filled with water. At temperature of liquid hydrogen, anomalous expansion of water keeps seal gland filled and leaktight despite shrinkage of surrounding O-ring material. Design also used in systems using cryogenic fluids other than liquid hydrogen.

  12. Non Destructive Seal Testing Polymeric Tray

    Science.gov (United States)

    2006-10-01

    School of Enviromental and Biological Science Rutgers, The State University of New Jersey New Brunswick, New Jersey 08903 Principal Investigator...strength, tack seals and seal creep. The following modifications were issued : Jan 20, 2004 0008/01 Add incremental funding to increase total...Technologies”. Most of the “commercial off the shelf” systems are designed to detect seal integrity issues , such as seal contamination, cuts and holes. A

  13. Multi-layer seal for electrochemical devices

    Science.gov (United States)

    Chou, Yeong-Shyung [Richland, WA; Meinhardt, Kerry D [Kennewick, WA; Stevenson, Jeffry W [Richland, WA

    2010-09-14

    Multi-layer seals are provided that find advantageous use for reducing leakage of gases between adjacent components of electrochemical devices. Multi-layer seals of the invention include a gasket body defining first and second opposing surfaces and a compliant interlayer positioned adjacent each of the first and second surfaces. Also provided are methods for making and using the multi-layer seals, and electrochemical devices including said seals.

  14. 29 CFR 4002.11 - Seal.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time to...

  15. 14 CFR 187.7 - Copies; seal.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in subpart...

  16. 19 CFR 201.0 - Seal.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b) Custody...

  17. 1 CFR 18.8 - Seal.

    Science.gov (United States)

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document or...

  18. Solid rocket booster joint seal analyses

    Science.gov (United States)

    Moore, Carleton J.

    1987-01-01

    O-ring response and sealing in pressurized shell structures is examined. The study found that the key elements in the failure of the seal to be joint opening and rotation, assembly out of roundness, and O-ring seal response.

  19. Ergonomics and safety of manual bag sealing.

    NARCIS (Netherlands)

    Groot, M.D. de; Bosch, T.; Eikhout, S.M.; Vink, P.

    2005-01-01

    A variety of seals is used to close bags. Each seal has advantages and disadvantages. For shop assistants sealing bags could be a repetitive physically demanding action. Opening and closing the bags again can cause some discomfort or annoyance for consumers. Besides, it is an activity which can

  20. Annular Pressure Seals and Hydrostatic Bearings

    National Research Council Canada - National Science Library

    San Andres, Luis

    2006-01-01

    ..., in particular those handling large density fluids. Highlights on the bulk-flow analysis of annular seals are given with details on the performance of two water seals long and short, featuring the advantages of an anti-swirl brake to enhance the seal...

  1. Aerodynamic seal assemblies for turbo-machinery

    Science.gov (United States)

    Bidkar, Rahul Anil; Wolfe, Christopher; Fang, Biao

    2015-09-29

    The present application provides an aerodynamic seal assembly for use with a turbo-machine. The aerodynamic seal assembly may include a number of springs, a shoe connected to the springs, and a secondary seal positioned about the springs and the shoe.

  2. Dampers for Stationary Labyrinth Seals

    Science.gov (United States)

    El-Aini, Yehia; Mitchell, William; Roberts, Lawrence; Montgomery, Stuart; Davis, Gary

    2011-01-01

    Vibration dampers have been invented that are incorporated as components within the stationary labyrinth seal assembly. These dampers are intended to supplement other vibration-suppressing features of labyrinth seals in order to reduce the incidence of high-cycle-fatigue failures, which have been known to occur in the severe vibratory environments of jet engines and turbopumps in which labyrinth seals are typically used. A vibration damper of this type includes several leaf springs and/or a number of metallic particles (shot) all held in an annular seal cavity by a retaining ring. The leaf springs are made of a spring steel alloy chosen, in conjunction with design parameters, to maintain sufficient preload to ensure effectiveness of damping at desired operating temperatures. The cavity is vented via a small radial gap between the retaining ring and seal housing. The damping mechanism is complex. In the case of leaf springs, the mechanism is mainly friction in the slippage between the seal housing and individual dampers. In the case of a damper that contains shot, the damping mechanism includes contributions from friction between individual particles, friction between particles and cavity walls, and dissipation of kinetic energy of impact. The basic concept of particle/shot vibration dampers has been published previously; what is new here is the use of such dampers to suppress traveling-wave vibrations in labyrinth seals. Damping effectiveness depends on many parameters, including, but not limited to, coefficient of friction, mode shape, and frequency and amplitude of vibrational modes. In tests, preloads of the order of 6 to 15 lb (2.72 to 6.8 kilograms) per spring damper were demonstrated to provide adequate damping levels. Effectiveness of shot damping of vibrations having amplitudes from 20 to 200 times normal terrestrial gravitational acceleration (196 to 1,960 meters per square second) and frequencies up to 12 kHz was demonstrated for shot sizes from 0.032 to

  3. Organic iodine in Antarctic sea ice: A comparison between winter in the Weddell Sea and summer in the Amundsen Sea

    Science.gov (United States)

    Granfors, Anna; Ahnoff, Martin; Mills, Matthew M.; Abrahamsson, Katarina

    2014-12-01

    Recent studies have recognized sea ice as a source of reactive iodine to the Antarctic boundary layer. Volatile iodinated compounds (iodocarbons) are released from sea ice, and they have been suggested to contribute to the formation of iodine oxide (IO), which takes part in tropospheric ozone destruction in the polar spring. We measured iodocarbons (CH3I, CH2ClI, CH2BrI, and CH2I2) in sea ice, snow, brine, and air during two expeditions to Antarctica, OSO 10/11 to the Amundsen Sea during austral summer and ANT XXIX/6 to the Weddell Sea in austral winter. These are the first reported measurements of iodocarbons from the Antarctic winter. Iodocarbons were enriched in sea ice in relation to seawater in both summer and winter. During summer, the positive relationship to chlorophyll a biomass indicated a biological origin. We suggest that CH3I is formed biotically in sea ice during both summer and winter. For CH2ClI, CH2BrI, and CH2I2, an additional abiotic source at the snow/ice interface in winter is suggested. Elevated air concentrations of CH3I and CH2ClI during winter indicate that they are enriched in lower troposphere and may take part in the formation of IO at polar sunrise.

  4. Long-term observations of theWeddell Sea Anomaly based on the Swarm, CHAMP and DEMETER missions

    Science.gov (United States)

    Slominska, E.

    2016-12-01

    Normalized density difference index (INDD) was introduced for the purpose of detection of such phenomena as the Weddell Sea Anomaly (WSA). With this basic approach, we are capable of identifying spatial and temporal occurrence of anomalies exhibiting reversed diurnal cycle, characterized by greater ionospheric plasma densities observed in the post-sunset hours, when compared to day-time ones. Development of the WSA together with similar phenomenon observed in the Northern Hemisphere, named as the Mid-latitude Summer Nighttime Anomaly is documented with three satellite missions Swarm, DEMETER, and CHAMP. Since the generation of discussed anomalies is still an open issue, multi-mission and multi-instrumental observations at various altitudes should improve our understanding of the phenomena, and verify the role of several potential mechanisms used for explanation. Among mentioned mechanisms, combined result of thermospheric wind, solar photo-ionization, and the local magnetic field configuration is taken as a most comprehensive explanation. Analysis based on long-term trends of observations from three missions and six satellites are aimed at the proper parametrization of the phenomenon. Using spatial gradients in the magnetic field components derived from Swarm A/B/C magnetometers, we discuss longitudinal distributions and variations of anomalies. The study quantifies hemispheric differences between two anomalies, as well as temporal trends concerning the solar cycle.

  5. Metal enrichment experiments in the Weddell-Scotia Seas: Effects of iron and manganese on various communities

    Energy Technology Data Exchange (ETDEWEB)

    Buma, A.G.J.; Barr, H.J.W. de; Nolting, R.F.; Bennekom, A.J. van (Netherlands Inst. for Sea Research, Den Burg (Netherlands))

    1991-12-01

    During the European Polarstern Study (EPOS 1988/1989) in the Weddell and Scotia Seas, five series of metal enrichment experiments were carried out with natural plankton communities under ultraclean conditions. Despite a clear stimulation of growth by the addition of Fe, control bottles also showed rapid buildup of Chl a and complete utilization of a major nutrient within 2 weeks, indicating nonlimiting ambient Fe levels. Effects of Mn additions were less pronounced or absent, whereas extra additions of Zn and Cu in one experiment showed little or no effect. The species composition of the plankton community, monitored by HPLC pigment analysis and microscopic observations, changed in favor of diatoms when Fe was added. The addition of Fe also caused an increase in microzooplankton densities and concentrations of pigment breakdown products. However, metal-mediated shifts in the plankton community were minor compared to major changes resulting from incubation. Changes were most pronounced in experiments where microzooplankton was strongly developed, presumably as a result of excluding mesozooplankton from the bottles. Fe had an impact on plankton growth and species composition, but other factors seem to responsible for keeping phytoplankton productivity far from its potential in these Antarctic waters.

  6. Immobilisation of southern elephant seals and leopard seals with cyclohexamine anaesthetics and xylazine.

    Science.gov (United States)

    Mitchell, P J; Burton, H R

    1991-10-12

    Ketamine and xylazine were given to 55 southern elephant seals (Mirounga leonina) for stomach lavaging, and to three leopard seals (Hydrurga leptonyx). The elephant seals showed prolonged apnoea and two of them died owing to aspiration of stomach contents. Two of the leopard seals died from unknown causes. Tiletamine and zolazepam were given to five elephant seals and one leopard seal. Two of the elephant seals and the leopard seal died from unknown causes. Xylazine alone was administered to 34 leopard seals. Sedation was poor at low dose rates (less than 1.7 mg/kg) but four of the seals given higher dose rates died owing to the aspiration of stomach contents.

  7. Turbine Seal Research at NASA GRC

    Science.gov (United States)

    Proctor, Margaret P.; Steinetz, Bruce M.; Delgado, Irebert R.; Hendricks, Robert C.

    2011-01-01

    Low-leakage, long-life turbomachinery seals are important to both Space and Aeronautics Missions. (1) Increased payload capability (2) Decreased specific fuel consumption and emissions (3) Decreased direct operating costs. NASA GRC has a history of significant accomplishments and collaboration with industry and academia in seals research. NASA's unique, state-of-the-art High Temperature, High Speed Turbine Seal Test Facility is an asset to the U.S. Engine / Seal Community. Current focus is on developing experimentally validated compliant, non-contacting, high temperature seal designs, analysis, and design methodologies to enable commercialization.

  8. Energy conversion device with improved seal

    Science.gov (United States)

    Miller, Gerald R.; Virkar, Anil V.

    1980-01-01

    An energy conversion device comprising an improved sealing member adapted to seal a cation-permeable casing to the remainder of the device. The sealing member comprises a metal substrate which (i) bears a nonconductive and corrosion resistant coating on the major surface to which said casing is sealed, and (ii) is corrugated so as to render it flexible, thereby allowing said member to move relative to said casing without cracking the seal therebetween. Corrugations may be circumferential, radial, or both radial and circumferential so as to form dimples. The corrugated member may be in form of a bellows or in a substantially flat form, such as a disc.

  9. Air riding seal with purge cavity

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, Thomas D; Mills, Jacob A

    2017-08-15

    An air riding seal for a turbine in a gas turbine engine, where an annular piston is axial moveable within an annular piston chamber formed in a stator of the turbine and forms a seal with a surface on the rotor using pressurized air that forms a cushion in a pocket of the annular piston. A purge cavity is formed on the annular piston and is connected to a purge hole that extends through the annular piston to a lower pressure region around the annular piston or through the rotor to an opposite side. The annular piston is sealed also with inner and outer seals that can be a labyrinth seal to form an additional seal than the cushion of air in the pocket to prevent the face of the air riding seal from overheating.

  10. Rotary seal with improved film distribution

    Science.gov (United States)

    Dietle, Lannie Laroy; Schroeder, John Erick

    2013-10-08

    The present invention is a generally circular rotary seal that establishes sealing between relatively rotatable machine components for lubricant retention and environmental exclusion, and incorporates seal geometry that interacts with the lubricant during relative rotation to distribute a lubricant film within the dynamic sealing interface. The features of a variable inlet size, a variable dynamic lip flank slope, and a reduction in the magnitude and circumferentially oriented portion of the lubricant side interfacial contact pressure zone at the narrowest part of the lip, individually or in combination thereof, serve to maximize interfacial lubrication in severe operating conditions, and also serve to minimize lubricant shear area, seal torque, seal volume, and wear, while ensuring retrofitability into the seal grooves of existing equipment.

  11. Seal dynamics on the Swedish west coast: Scenarios of competition as Baltic grey seal intrude on harbour seal territory

    Science.gov (United States)

    Svensson, Carl Johan

    2012-07-01

    The Kattegat-Skagerrak region on the Swedish west coast is home to an abundant harbour seal population (Phoca vitulina) and a small scattered grey seal population (Halichoerus grypus). In addition, grey seal from the growing population in the Baltic Sea frequently migrate into the Kattegat-Skagerrak. Harbour seals on the west coast of Sweden show relatively high population growth (approximately 9%) compared to the Baltic grey seal in ice-free habitats (approximately 6%), which, in theory, makes harbour seal the stronger competitor of the two in this region. However, incidents of disease in harbour seals that lower population growth are becoming more frequent. These epidemics are primarily caused by the Phocine Distemper Virus (PDV), and may reduce population size with up to 70%. This study models the average development under potential scenarios of competing harbour- and Baltic grey seal populations using Leslie matrices and the Lotka-Volterra model of inter-specific competition. The model is parameterised with previously published data, and resource overlap is incorporated through density dependent pup survival. Using numerical methods short- and long-term abundances are simulated under weak, moderate and strong competition and for different frequencies of PDV epidemics. Results show that the harbour seals are resilient to competition while exerting a negative effect on grey seal abundance under moderate to strong competition. Hence Baltic grey seal benefit from weaker levels of competition. Under moderate and strong competition grey seal abundance is a direct function of the PDV frequency as this reduces the competitive strength of harbour seals. Theoretically this means that higher frequencies of PDV or other pathogens epidemics could facilitate an expansion of Baltic grey seal into Kattegat-Skagerrak. Independent of interaction strength and frequency of epidemics the projected changes to abundances are slow (50-100 years), and even in exceedingly stable

  12. Seal designing of theodolite used in seaside environment

    Science.gov (United States)

    Jin, Humin; Yan, Xiaoxu; Hao, Wei; Zhou, Sizhong

    2014-08-01

    Based on the environment requirements in seaside there exists static and dynamic seal designing for the photoelectric Theodolite. Static seal designing emphatically includes the designing of o-ring size and mechanical property analysis of o-ring seal, which is difficult to adopt conventional dynamic seal to meet the requirements. According to practical application, the combination of the radial labyrinth seal and high quality felt seal are designed. The combination seal which better solves the seal problem of narrow radial size is a good way of dynamic seal. At the same time, there is engineering practice needing to proof the radial labyrinth seal.

  13. Ampoule sealing apparatus and process

    Science.gov (United States)

    Debnam, Jr., William J. (Inventor); Clark, Ivan O. (Inventor)

    1988-01-01

    An apparatus 10 for effecting sealing of a fused quartz ampoule 24 while maintaining a vacuum on the ampoule via system 12 is disclosed. A plug 28 of fused quartz is lowered into the vertically disposed ampoule 24 (while maintaining the vacuum thereon) and heat sealed therein to prevent any vapor escape from, or contamination of, the contained semiconductor growth charge 29 during subsequent semiconductor crystal growth processes. A rotary vacuum feed-through mechanism 16 selectively rotates axle 34 and spool 32 to unwind wire 30 for lowering of plug 28 into the reduced diameter portion 24b of ampoule 24. Ampoule 24 is hermatically connected to vacuum housing 18 by quick release flange 20 wherein O-ring 22 retains ampoule 24.

  14. Hermetically Sealed Aluminum Electrolytic Capacitor

    Science.gov (United States)

    Alwitt, Robert S.; Liu, Yanming; Elias, William

    1996-01-01

    Aluminum electrolytic capacitors are presently not allowed on NASA missions because they outgas water and organic vapors, as well as H2. As a consequence, for some applications, much larger and heavier packages of tantalum capacitors must be used. A hermetically sealed aluminum capacitor has been developed. This contains a nongassing electrolyte that was developed for this application so internal pressure would remain low. Capacitors rated from 250 V to 540 V have been operated under full load for thousands of hours at 85 and 105 C with good electrical performance and absence of gas generation. Electrolyte chemistry and seal engineering will be discussed, as well as the extension of this design concept to lower voltage ratings.

  15. Translation and rotation of small crustal blocks in the southernmost Atlantic-Weddell Sea region prior to seafloor spreading: in search of a mechanism

    Science.gov (United States)

    Dalziel, I. W. D.; Norton, I. O.; Lawver, L. A.; Lavier, L.; Davis, J. K.; Gahagan, L.

    2016-12-01

    Geological and paleomagnetic data indicate that initial fragmentation of the Gondwanaland supercontinent in the southernmost Atlantic-Weddell Sea region involved translation and rotation of two small crustal blocks. The Falkland/Malvinas block on the South American plate (F/M) and the Ellsworth-Whitmore mountains block in West Antarctica (EWM) both contain segments of the earliest Mesozoic Gondwana fold belt. The blocks originated in the Natal embayment between the Cape Mountains of southernmost Africa and the Pensacola Mountains of the East Antarctic craton margin. Shortly after emplacement of the Karoo-Ferrar large igneous province (LIP) at ca. 182Ma, the F/M block was rotated clockwise 150 ° and the EWM block counter¬clockwise 90°, while both were translated several hundred kilometers towards the Panthalassic/Pacific Ocean. As indicated by absence of shortening in the sedimentary basins of the F/M Plateau and Weddell embayment, the motions of the crustal blocks relative to the major continents happened during extreme extension accompanied by widespread silicic magmatism that preceded seafloor spreading. We propose a new reconstruction of the Gondwana craton margin, suggesting an original embayment between the Kalahari and East Antarctic cratons, and subsequent mirror-image clockwise (South America-F/M) and counterclockwise (Antarctic Peninsula-EWM) rotations prior to seafloor spreading in the Weddell Sea and South Atlantic.What geodynamic processes were involved in the significant rotations and translations of continental lithosphere prior to ocean basin formation? Our conclusion, based on the geologic and geophysical data and on geodynamic modeling, is that the motions were driven by the distributed crustal thinning of warm continental lithosphere and by mantle flow towards a retreating Panthalassic margin subduction zone associated with the formation of the Karoo-Ferrar Large Igneous Province between the East Antarctic, Kalahari and Rio de la Plata cratons.

  16. Early results from combined historic chlorofluorocarbon and first sulphur hexafluoride measurements in the Weddell Sea - variability of ventilation rates and anthropogenic carbon

    Science.gov (United States)

    Huhn, O.; Rhein, M.; Bulsiewicz, K.

    2012-04-01

    The Weddell Sea is a key area for the formation of deep and bottom water and, hence, a major driver of the deep part of the global ocean's conveyor belt. Furthermore, it provides an important sink for atmospheric gases like anthropogenic carbon. Its sensitivity to changing atmospheric conditions is under discussion. During the last three decades time series of anthropogenic transient tracer measurements (chlorofluorocarbons, CFCs) were obtained on a section crossing the Weddell Basin from the northern tip of the Antarctic Peninsula to Cape Norwegia and along the Prime Meridian from the Antarctic Continent to the Mid Atlantic Ridge (1984-2008). On our most recent RV POLARSTERN expedition from November 2010 to February 2011 we obtained for the first time sulphur hexafluoride (SF6) measurements in addition to CFCs in that area. The onset of the atmospheric SF6 history starts some decades after the CFCs, and the increase of SF6 in the atmosphere is steeper. The combination of CFC and SF6 may, hence, provide a better constraint for the quantification of very recently ventilated deep and bottom water and for the estimate of transport time scales or transit time distributions (TTDs). We discuss that new CFC and SF6 data set in comparison to the historic CFC data and show early results from our analysis. We use the extended CFC time series combined with the additional tracer SF6 to determine TTDs, from which we assess the ventilation rates of deep and bottom water and estimate the related content of anthropogenic carbon and their temporal variability in the Weddell Sea during the last three decades.

  17. Seal for fluid forming tools

    Science.gov (United States)

    Golovashchenko, Sergey Fedorovich [Beverly Hills, MI; Bonnen, John Joseph Francis [Milford, MI

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  18. Seals, Concrete Anchors, and Connections

    Science.gov (United States)

    1989-02-01

    coupling rigid mounted blast doors to shock iso - lated specialty doors (RFI, gas sealed, fire rated, etc.), providing portals between two rigid...26- 38500 27- 38500 3/8 x 5 50 3421 3/8 x 2-5/8 ." 1 26-12234 27-12234 112 X 2.3/4 50 3422 3/8 x 3 b0 26-12400 27-12400 1/2 X 4 50 3423 318 x 4 50

  19. Characteristics and distribution patterns of snow and meteoric ice in the Weddell Sea and their contribution to the mass balance of sea ice

    Directory of Open Access Journals (Sweden)

    Hajo Eicken

    Full Text Available Based on snow- and ice-thickness measurements at >11 000 points augmented by snow- and icecore studies during 4 expeditions from 1986 - 92 in the Weddell Sea, we describe characteristics and distribution patterns of snow and meteoric ice and assess their importance for the mass balance of sea ice. For first-year ice (FY in the central and eastern Weddell Sea, mean snow depth amounts to 0.16 m (mean ice thickness 0.75 m compared to 0.53 m (mean ice thickness 1.70 m for second-year ice (SY in the northwestern Weddell Sea. Ridged ice retains a thicker snow cover than level ice, with ice thickness and snow depth negatively correlated for the latter, most likely due to aeolian redistribution. During the different expeditions, 8, 15, 17 and 40% of all drill holes exhibited negative freeboard. As a result of flooding and brine seepage into the snow pack, snow salinities averaged 4‰. Through 18O measurements the distribution of meteoric ice (i.e. precipitation in the sea-ice cover was assessed. Roughly 4% of the total ice thickness consist of meteoric ice (FY 3%, SY 5%. With a mean density of 290 kg/m3, the snow cover itself contributes 8% to total ice mass (7% FY, 11% SY. Analysis of 18O in snow indicates a local maximum in accumulation in the 65 to 75°S latitude zone. Hydrogen peroxide in the snow has proven useful as a temporal tracer and for identification of second-year floes. Drawing on accumulation data from stations at the Weddell Sea coast, it becomes clear that the onset of ice growth is important for the evolution of ice thickness and the interaction between ice and snow. Loss of snow to leads due to wind drift may be considerable, yet is reduced owing to metamorphic processes in the snow column. This is confirmed by a comparison of accumulation data from coastal stations and from snow depths over sea ice. Temporal and spatial accumulation patterns of snow are shown to be important in controlling

  20. Characteristics and distribution patterns of snow and meteoric ice in the Weddell Sea and their contribution to the mass balance of sea ice

    Directory of Open Access Journals (Sweden)

    H. Eicken

    1994-01-01

    Full Text Available Based on snow- and ice-thickness measurements at >11 000 points augmented by snow- and icecore studies during 4 expeditions from 1986 - 92 in the Weddell Sea, we describe characteristics and distribution patterns of snow and meteoric ice and assess their importance for the mass balance of sea ice. For first-year ice (FY in the central and eastern Weddell Sea, mean snow depth amounts to 0.16 m (mean ice thickness 0.75 m compared to 0.53 m (mean ice thickness 1.70 m for second-year ice (SY in the northwestern Weddell Sea. Ridged ice retains a thicker snow cover than level ice, with ice thickness and snow depth negatively correlated for the latter, most likely due to aeolian redistribution. During the different expeditions, 8, 15, 17 and 40% of all drill holes exhibited negative freeboard. As a result of flooding and brine seepage into the snow pack, snow salinities averaged 4‰. Through 18O measurements the distribution of meteoric ice (i.e. precipitation in the sea-ice cover was assessed. Roughly 4% of the total ice thickness consist of meteoric ice (FY 3%, SY 5%. With a mean density of 290 kg/m3, the snow cover itself contributes 8% to total ice mass (7% FY, 11% SY. Analysis of ∆18O in snow indicates a local maximum in accumulation in the 65 to 75°S latitude zone. Hydrogen peroxide in the snow has proven useful as a temporal tracer and for identification of second-year floes. Drawing on accumulation data from stations at the Weddell Sea coast, it becomes clear that the onset of ice growth is important for the evolution of ice thickness and the interaction between ice and snow. Loss of snow to leads due to wind drift may be considerable, yet is reduced owing to metamorphic processes in the snow column. This is confirmed by a comparison of accumulation data from coastal stations and from snow depths over sea ice. Temporal and spatial accumulation patterns of snow are shown to be important in controlling the sea-ice cover evolution.

  1. Simulating pancake and frazil ice growth in the Weddell Sea: A process model from freezing to consolidation

    Science.gov (United States)

    Doble, Martin J.

    2009-09-01

    Processes controlling the formation and transformation of frazil to pancake ice are examined using data from an array of drifting buoys deployed at the advancing ice edge in the Weddell Sea. A simple thermodynamic model is coupled to the buoy dynamics and to an ice redistribution model to determine the influence of deformation, thermodynamics, and mechanical scavenging, incorporating frazil crystals from the surrounding slick into the pancakes, on the partitioning of ice volume between frazil and pancakes. Ice production was examined from the time the buoys were deployed until the frazil/pancake cover consolidated into the more familiar pack ice. The model reproduced the expected ice cover thickness at consolidation (60 cm). Rafting was the dominant contribution to thickening in the region owing to large-scale compression of the initial area by northerly winds from passing low-pressure weather systems, which are rather typical in the region. High-resolution positional forcing from the buoys (20-min intervals) doubled the contribution of mechanical scavenging to final pancake thickness compared to the coarser (2-h) result, owing to the larger path length that the pancakes traverse through the frazil slick, and produced a significantly larger volume of ice in the pancake phase. The ice cover generated at consolidation was approximately twice as thick as would have formed by the more familiar congelation ice growth under the same forcing, reinforcing the importance of correctly parameterizing the early stages of ice formation in the Antarctic. The study highlighted uncertainties in the effect of the frazil/pancake cover on ocean-atmosphere heat exchange, both in terms of the area contributing to ice production and the effect on turbulent exchange coefficients. Further work placing the empirical parameters into a more constrained physical framework and introducing wave properties is suggested.

  2. Air-ice drag coefficients in the western Weddell Sea: 2. A model based on form drag and drifting snow

    Science.gov (United States)

    Andreas, Edgar L.

    1995-03-01

    In part 1 (Andreas and Claffey, this issue) we observed some characteristics of the neutral stability air-ice drag coefficient at a reference height of 10 m (CDN10) that had not been documented before. Our main conclusion was that wind-driven snow continually alters the sea ice surface; the resulting snowdrifts determine how large CDN10 is. In particular, part 1 reported three observations that I would like to explain. (1) CDN10 is near 1.5×10-3 when the wind is well aligned with the drifted snow. (2) CDN10 is near 2.5×10-3 when the wind makes a large angle with the dominant orientation of the snowdrifts. (3) CDN10 can increase by 20% if, after being well aligned with the drift patterns, the mean wind direction shifts by as little as 20°. To investigate this behavior of CDN10 here I adapt a model developed by Raupach (1992) that partitions the total surface stress into contributions from form drag and skin friction. An essential part of this development was extending Raupach's model to the more complex geometry of sastrugi-like roughness elements. Assuming that 10-cm high sastrugi cover 15% of the surface, this physically based model reproduces the three main observations listed above. Thus the model seems to include the basic physics of air-ice momentum exchange. The main conclusion from this modeling is that 10-cm, sastrugilike snowdrifts, rather than pressure ridges, sustain most of the form drag over compact sea ice in the western Weddell Sea. Secondly, the modeling suggests that skin friction accounts for about 60% of the surface stress when the wind is well aligned with the sastrugi; but when the wind is not well aligned, form drag accounts for about 80% of the stress. The sastrugi are thus quite effective in streamlining the surface.

  3. High temperature dynamic engine seal technology development

    Science.gov (United States)

    Steinetz, Bruce M.; Dellacorte, Christopher; Machinchick, Michael; Mutharasan, Rajakkannu; Du, Guang-Wu; Ko, Frank; Sirocky, Paul J.; Miller, Jeffrey H.

    1992-01-01

    Combined cycle ramjet/scramjet engines being designed for advanced hypersonic vehicles, including the National Aerospace Plane (NASP), require innovative high temperature dynamic seals to seal the sliding interfaces of the articulated engine panels. New seals are required that will operate hot (1200 to 2000 F), seal pressures ranging from 0 to 100 psi, remain flexible to accommodate significant sidewall distortions, and resist abrasion over the engine's operational life. This report reviews the recent high temperature durability screening assessments of a new braided rope seal concept, braided of emerging high temperature materials, that shows promise of meeting many of the seal demands of hypersonic engines. The paper presents durability data for: (1) the fundamental seal building blocks, a range of candidate ceramic fiber tows; and for (2) braided rope seal subelements scrubbed under engine simulated sliding, temperature, and preload conditions. Seal material/architecture attributes and limitations are identified through the investigations performed. The paper summarizes the current seal technology development status and presents areas in which future work will be performed.

  4. Wet powder seal for gas containment

    Science.gov (United States)

    Stang, Louis G.

    1982-01-01

    A gas seal is formed by a compact layer of an insoluble powder and liquid filling the fine interstices of that layer. The smaller the particle size of the selected powder, such as sand or talc, the finer will be the interstices or capillary spaces in the layer and the greater will be the resulting sealing capacity, i.e., the gas pressure differential which the wet powder layer can withstand. Such wet powder seal is useful in constructing underground gas reservoirs or storage cavities for nuclear wastes as well as stopping leaks in gas mains buried under ground or situated under water. The sealing capacity of the wet powder seal can be augmented by the hydrostatic head of a liquid body established over the seal.

  5. Air riding seal for a turbine

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Jacob A; Brown, Wesley D; Sexton, Thomas D; Jones, Russell B

    2016-07-19

    An air riding seal between a rotor and a stator in a turbine of a gas turbine engine, where an annular piston is movable in an axial direction within a housing that extends from the stator, and a bellows is secured to the annular piston to form a flexible air passageway from a compressed air inlet through the annular piston and into a cushion cavity that forms an air riding seal between the annular piston and the rotor sealing surface. In another embodiment, a flexible seal secured to and extending from the annular piston forms a sealing surface between the annular piston chamber and the annular piston to provide a seal and allow for axial movement.

  6. NEW POLIMER SEALING FLUID STOPS MUD LOSS

    Directory of Open Access Journals (Sweden)

    Stanislaw Stryczek

    1989-12-01

    Full Text Available This paper deals with a composition of sealing fluid, prepared from acrylic acid salt water solution Solakryl M. Laboratory test results of technological properties of its modifications with mineral agents are shown. A new method of sealing mud loss operations with given sealing liquid is discussed along with comments on effects of its use for stopping mud loss in case of freeze-well drilling is described (the paper is published in Croatian.

  7. A Hot Dynamic Seal Rig for Measuring Hypersonic Engine Seal Durability and Flow Performance

    Science.gov (United States)

    Miller, Jeffrey H.; Steinetz, Bruce M.; Sirocky, Paul J.; Kren, Lawrence A.

    1993-01-01

    A test fixture for measuring the dynamic performance of candidate high-temperature engine seal concepts was installed at NASA Lewis Research Center. The test fixture was designed to evaluate seal concepts under development for advanced hypersonic engines, such as those being considered for the National Aerospace Plane (NASP). The fixture can measure dynamic seal leakage performance from room temperature up to 840 C (1550 F) and air pressure differentials up to 690 kPa (100 psi). Performance of the seals can be measured while sealing against flat or distorted walls. In the fixture two seals are preloaded against the sides of a 30 cm (1 ft) long saber that slides transverse to the axis of the seals, simulating the scrubbing motion anticipated in these engines. The capabilities of this test fixture along with preliminary data showing the dependence of seal leakage performance on high temperature cycling are addressed.

  8. Hypersonic engine seal development at NASA Lewis Research Center

    Science.gov (United States)

    Steinetz, Bruce M.

    1994-01-01

    NASA Lewis Research Center is developing advanced seal concepts and sealing technology for advanced combined cycle ramjet/scramjet engines being designed for the National Aerospace Plane (NASP). Technologies are being developed for both the dynamic seals that seal the sliding interfaces between articulating engine panels and sidewalls, and for the static seals that seal the heat exchanger to back-up structure interfaces. This viewgraph presentation provides an overview of the candidate engine seal concepts, seal material assessments, and unique test facilities used to assess the leakage and thermal performance of the seal concepts.

  9. Ductile alloys for sealing modular component interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Marra, John J.; Wessell, Brian J.; James, Allister W.; Marsh, Jan H.; Gear, Paul J.

    2017-08-08

    A vane assembly (10) having: an airfoil (12) and a shroud (14) held together without metallurgical bonding there between; a channel (22) disposed circumferentially about the airfoil (12), between the airfoil (12) and the shroud (14); and a seal (20) disposed in the channel (22), wherein during operation of a turbine engine having the vane assembly (10) the seal (20) has a sufficient ductility such that a force generated on the seal (20) resulting from relative movement of the airfoil (12) and the shroud (14) is sufficient to plastically deform the seal (20).

  10. A reliable sealing method for microbatteries

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yuxing; Cartmell, Samuel; Li, Qiuyan; Xiao, Jie; Li, Huidong; Deng, Zhiqun Daniel; Zhang, Ji-Guang

    2017-02-01

    With continuous downsizing of electronic devices, lithium batteries of traditional shapes cannot meet the demand where small-size high energy density batteries are needed. Conventional sealing methods become increasingly difficult to apply and impose high processing cost as the size of batteries decreases. In this report, a facile sealing method is proposed and demonstrated in CFx/Li mini-batteries. The method employs a temporary barrier to liquid electrolytes while relies on the epoxies/cell casings bond for the hermetic sealing. Cells sealed by this method show no degradation for an extended period of storage time.

  11. Mars containers - Dust on teflon sealing surfaces

    Science.gov (United States)

    Lauer, H. V., Jr.; Allton, J. H.

    As part of an evaluation of suitable hermetic seals for containers for Martian rock and soil samples, teflon o-ring static face seals were challenged with silica gel, basalt, and bentonite dust in several size ranges: 20-45 microns, 45-75 microns, and 75-125 microns. Seals were most tolerant of the soft bentonite dust and least tolerant of angular silica gel dust. Small amounts of 75-125 micron size particles can be accommodated by the teflon o-ring; however, the seals do not work well if smaller particles are concentrated enough to form layers more than 1 grain thick.

  12. 28 CFR 803.3 - Use of the seal.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) The Agency seal is used by Agency staff for official agency business as approved by the appropriate Director or designee. (b) Use of the Agency seal by any person or...

  13. Well sealing via thermite reactions

    Science.gov (United States)

    Lowry, William Edward; Dunn, Sandra Dalvit

    2016-11-15

    A platform is formed in a well below a target plug zone by lowering a thermite reaction charge into the well and igniting it, whereby the products of the reaction are allowed to cool and expand to form a platform or support in the well. A main thermite reaction charge is placed above the platform and ignited to form a main sealing plug for the well. In some embodiments an upper plug is formed by igniting an upper thermite reaction charge above the main thermite reaction charge. The upper plug confines the products of ignition of the main thermite reaction charge.

  14. Magnetohydrodynamic (MHD) channel corner seal

    Science.gov (United States)

    Spurrier, Francis R.

    1980-01-01

    A corner seal for an MHD duct includes a compressible portion which contacts the duct walls and an insulating portion which contacts the electrodes, sidewall bars and insulators. The compressible portion may be a pneumatic or hydraulic gasket or an open-cell foam rubber. The insulating portion is segmented into a plurality of pieces of the same thickness as the electrodes, insulators and sidewall bars and aligned therewith, the pieces aligned with the insulator being of a different size from the pieces aligned with the electrodes and sidewall bars to create a stepped configuration along the corners of the MHD channel.

  15. Surface Seal for Carbon Parts

    Science.gov (United States)

    Shuford, D. M.; Spruiell, J. P.

    1982-01-01

    Surface pores in parts made of graphite or reinforced-carbon/ carbon materials are sealed by a silicon carbide-based coating. Coating inhibits subsurface oxidation and lengthens part life. Starting material for coating is graphite felt, which is converted to silicon carbide felt by processing it according to a prescribed time/temperature schedule. Converted felt is pulverized in a ball mill and resulting powder is mixed with an equal weight of black silicon carbide powder. Powder mixture is combined with an equal weight of adhesive to form a paste.

  16. 76 FR 46279 - Marine Mammals; File No. 87-1851

    Science.gov (United States)

    2011-08-02

    ... seals (Leptonychotes weddellii), 35 crabeater seals (Lobodon carcinophagus), 35 southern elephant seals (Mirounga leonina), 10 leopard seals (Hydrurga leptonyx), and 5 Ross seals (Ommatophoca rossii). Incidental..., issued on September 3, 2010 (75 FR 55745), authorizes tagging studies and physiological research on seals...

  17. Albinistic common seals (Phoca vitulina) and melanistic grey seals (Halichoerus grypus) rehabilitated in the Netherlands

    NARCIS (Netherlands)

    Osinga, Nynke; 't Hart, Pieter; Vader, Pieter C. van Voorst

    2010-01-01

    The Seal Rehabilitation and Research Centre (SRRC) in Pieterburen, The Netherlands, rehabilitates seals from the waters of the Wadden Sea, North Sea and Southwest Delta area. Incidental observations of albinism and melanism in common and grey seals are known from countries surrounding the North Sea.

  18. Seals at sea: modelling seal distribution in the German bight based on aerial survey data

    NARCIS (Netherlands)

    Herr, H.; Scheidat, M.; Lehnert, K.; Siebert, U.

    2009-01-01

    The Wadden Sea is an important habitat for harbour seals and grey seals. They regularly haul-out on sandbanks and islands along the coast. Comparably little is known about the time seals spend at sea and how they use the remainder of the North Sea. Yet, human activity in offshore waters is

  19. Elements for a revision and notes on bionomy of the Cumacea (Crustacea: Peracarida) of the Weddell Sea (Antarctica). : Material collected by the Expedition ANTARKTIS-VIII/5 of R.V. “Polarstern” 1989/90

    NARCIS (Netherlands)

    Petrescu, I.; Wittmann, K.J.

    2003-01-01

    Among 26 species of Antarctic Cumacea sampled during the southern summer 1989/90 from benthic habitats in the Weddell Sea, four are described as new to science: Campylaspis ledoyeri spec. nov., Hemilamprops bacescui spec. nov., Paralamprops racovitzai spec. nov., and Leptostylis weddelli spec. nov.

  20. Corkscrew Seals: Grey Seal (Halichoerus grypus Infanticide and Cannibalism May Indicate the Cause of Spiral Lacerations in Seals.

    Directory of Open Access Journals (Sweden)

    Andrew Brownlow

    Full Text Available Large numbers of dead seals with characteristic spiral lesions have been washing ashore around the North Atlantic over the past two decades. Interactions with ship propellers and shark predation have been suggested as the likely causal mechanisms. However, new evidence points towards a more likely candidate: grey seal predation. An adult male grey seal was observed and recorded catching, killing and eating five weaned grey seal pups over a period of one week on the Isle of May, Scotland. A further 9 carcasses found in the same area exhibited similar injuries. Post mortem analysis of lesions indicated the wound characteristics were similar to each other and in 12 of the 14 carcasses analysed, were indistinguishable from carcasses previously attributed to propeller interaction. We therefore propose that most of the seal carcasses displaying spiral lacerations in the UK are caused by grey seal predation. Cases in other locations should be re-evaluated using the scoring system presented here to identify whether grey seal predation is a major cause of mortality in phocid seals.

  1. Corkscrew Seals: Grey Seal (Halichoerus grypus) Infanticide and Cannibalism May Indicate the Cause of Spiral Lacerations in Seals.

    Science.gov (United States)

    Brownlow, Andrew; Onoufriou, Joseph; Bishop, Amanda; Davison, Nicholas; Thompson, Dave

    2016-01-01

    Large numbers of dead seals with characteristic spiral lesions have been washing ashore around the North Atlantic over the past two decades. Interactions with ship propellers and shark predation have been suggested as the likely causal mechanisms. However, new evidence points towards a more likely candidate: grey seal predation. An adult male grey seal was observed and recorded catching, killing and eating five weaned grey seal pups over a period of one week on the Isle of May, Scotland. A further 9 carcasses found in the same area exhibited similar injuries. Post mortem analysis of lesions indicated the wound characteristics were similar to each other and in 12 of the 14 carcasses analysed, were indistinguishable from carcasses previously attributed to propeller interaction. We therefore propose that most of the seal carcasses displaying spiral lacerations in the UK are caused by grey seal predation. Cases in other locations should be re-evaluated using the scoring system presented here to identify whether grey seal predation is a major cause of mortality in phocid seals.

  2. Rodent Control: Seal Up! Trap Up! Clean Up!

    Science.gov (United States)

    ... successfully trapping rodents in and around the home. Seal Up! Seal up holes inside and outside the home to ... infested areas. Before cleaning, trap the rodents and seal up any entryways to ensure that no rodents ...

  3. Performance oriented guidance for Mississippi chip seals - volume I.

    Science.gov (United States)

    2013-12-01

    A five year laboratory study was conducted to investigate near surface properties of flexible pavements in relation to : how they are affected by bituminous surface treatments. Chip seals and scrub seals (a specialized type of chip seal) : were the f...

  4. Damping device for a stationary labyrinth seal

    Science.gov (United States)

    El-Aini, Yehia M. (Inventor); Mitchell, William S. (Inventor); Roberts, Lawrence P. (Inventor); Montgomery, Stuart K. (Inventor); Davis, Gary A. (Inventor)

    2010-01-01

    A stationary labyrinth seal system includes a seal housing having an annular cavity, a plurality of damping devices, and a retaining ring. The damping devices are positioned within the annular cavity and are maintained within the annular cavity by the retaining ring.

  5. Heat and Pressure Seal for Doors

    Science.gov (United States)

    Gillespie, C. A.

    1982-01-01

    Proposed tubular gasket for doors performs dual function: seals in pressure, and seals out heat. Composed of quartz fabric filled with alumina matting, gasket is bonded with room-temperature-vulcanizing material to periphery of door. When door is closed, gasket is compressed like O-ring: fills gap between door and frame; and prevents leakage of air and heat.

  6. Cadmium Toxicity to Ringed Seals (Phoca hispida)

    DEFF Research Database (Denmark)

    Sonne, Christian; Dietz, R.; Riget, F. F.

    Cadmium concentrations in kidneys from ringed seals (Phoca hispida) from North West Greenland (Qaanaaq) are high. Concentrations range at level known to induce renal toxic effects (mainly tubulopathy) and demineralisation (osteopenia) of the skeletal system (Fanconi's Syndrome) in humans as well...... the absence of toxic effects of cadmium in ringed seal...

  7. Space Environment's Effects on Seal Materials

    Science.gov (United States)

    deGroh, Henry C., III; Daniels, Christopher C.; Dunlap, Patrick; Miller, Sharon; Dever, Joyce; Waters, Deborah; Steinetz, Bruce M.

    2007-01-01

    A Low Impact Docking System (LIDS) is being developed by the NASA Johnson Space Center to support future missions of the Crew Exploration Vehicle (CEV). The LIDS is androgynous, such that each system half is identical, thus any two vehicles or modules with LIDS can be coupled. Since each system half is a replica, the main interface seals must seal against each other instead of a conventional flat metal surface. These sealing surfaces are also expected to be exposed to the space environment when vehicles are not docked. The NASA Glenn Research Center (NASA GRC) is supporting this project by developing the main interface seals for the LIDS and determining the durability of candidate seal materials in the space environment. In space, the seals will be exposed to temperatures of between 50 to 50 C, vacuum, atomic oxygen, particle and ultraviolet radiation, and micrometeoroid and orbital debris (MMOD). NASA GRC is presently engaged in determining the effects of these environments on our candidate elastomers. Since silicone rubber is the only class of seal elastomer that functions across the expected temperature range, NASA GRC is focusing on three silicone elastomers: two provided by Parker Hannifin (S0-899-50 and S0-383-70) and one from Esterline Kirkhill (ELA-SA-401). Our results from compression set, elastomer to elastomer adhesion, and seal leakage tests before and after various simulated space exposures will be presented.

  8. Sealing a Loosely Fitting Valve Assembly

    Science.gov (United States)

    Goff, L.; Tellier, G.

    1986-01-01

    Double-ring seal avoids expense of remachining or redesigning valve parts. Mating fittings on valve sealed by pair of rings - one O-ring and backup ring. Backup ring fills relatively large gap between parts. Prevents softer O-ring from being pushed into and through gap.

  9. Sealing Occlusal Dentin Caries in Permanent Molars

    DEFF Research Database (Denmark)

    Qvist, Vibeke; Borum, Mette Kit; Møller, Kirsten Dynes

    2017-01-01

    The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical and radiog......The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical...... longevity of sealings and restorations until retreatments, and 3) compare effectiveness of sealings and restorations to halt caries progression in sealed lesions and beneath restorations. Furthermore, we aimed to identify factors influencing longevity and the effectiveness of sealings and restorations.......001). The median survival time for sealings not replaced by restorations was 7.3 y (CI, 6.4 y to NA). Survival of sealings was increased in patients with low caries risk and/or excellent oral hygiene, second molars compared with first molars, and lesions not extending the middle one-third of the dentin. Survival...

  10. Performance evaluation of chip seals in Idaho.

    Science.gov (United States)

    2010-08-01

    The intent of this research project is to identify a wide variety of parameters that influence the performance of pavements treated via chip seals within the State of Idaho. Chip sealing is currently one of the most popular methods of maintenance for...

  11. Earlier pupping in harbour seals, Phoca vitulina

    NARCIS (Netherlands)

    Reijnders, P.J.H.; Brasseur, S.M.J.M.; Meesters, H.W.G.

    2010-01-01

    The annual reproductive cycle of most seal species is characterized by a tight synchrony of births. Typically, timing of birth shows little inter-annual variation. Here, however we show that harbour seals Phoca vitulina from the Wadden Sea (southeast North Sea) have shortened their yearly cycle,

  12. 19 CFR 101.7 - Customs seal.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department...

  13. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands

    NARCIS (Netherlands)

    R. Bodewes (Rogier); A.R. García (Ana Rubio); S.M. Brasseur (Sophie M.); G.J.S. Conteras (Guillermo J. Sanchez); M.W.G. van de Bildt (Marco); M.P.G. Koopmans D.V.M. (Marion); A.D.M.E. Osterhaus (Albert); T. Kuiken (Thijs)

    2015-01-01

    textabstractIn the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals

  14. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands

    NARCIS (Netherlands)

    Bodewes, Rogier; Garcia, Ana Rubio; Brasseur, Sophie M.; Conteras, Guillermo J.S.; De Bildt, Van Marco W.G.; Koopmans, Marion P.G.; Osterhaus, Albert D.M.E.; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were

  15. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands

    NARCIS (Netherlands)

    Bodewes, Rogier|info:eu-repo/dai/nl/33230583X; Rubio García, Ana; Brasseur, Sophie M; Sanchez Conteras, Guillermo J; van de Bildt, Marco W G; Koopmans, Marion P G; Osterhaus, Albert D M E|info:eu-repo/dai/nl/074960172; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were

  16. Active Infrared Thermography for Seal Contamination Detection in Heat-Sealed Food Packaging

    Directory of Open Access Journals (Sweden)

    Karlien D’huys

    2016-11-01

    Full Text Available Packaging protects food products from environmental influences, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the quality of the packaging material and of the closure or seal. A common problem possibly jeopardizing seal quality is the presence of seal contamination, which can cause a decreased seal strength, an increased packaging failure risk and leak formation. Therefore, early detection and removal of seal contaminated packages from the production chain is crucial. In this work, a pulsed-type active thermography method using the heated seal bars as an excitation source was studied for detecting seal contamination. Thermal image sequences of contaminated seals were recorded shortly after sealing. The detection performances of six thermal image processing methods, based on a single frame, a fit of the cooling profiles, thermal signal reconstruction, pulsed phase thermography, principal component thermography and a matched filter, were compared. High resolution digital images served as a reference to quantify seal contamination, and processed thermal images were mapped to these references. The lowest detection limit (equivalent diameter 0.60 mm was obtained for the method based on a fit of the cooling profiles. Moreover, the detection performance of this method did not depend strongly on the time after sealing at which recording of the thermal images was started, making it a robust and generally applicable method.

  17. Effects of sonic booms on breeding gray seals and harbor seals on Sable Island, Canada.

    Science.gov (United States)

    Perry, Elizabeth A; Boness, Daryl J; Insley, Stephen J

    2002-01-01

    The Concorde produces audible sonic booms as it passes 15 km north of Sable Island, Nova Scotia, where gray and harbor seals occur year round. The purpose of this research was to assess how sonic booms affect these seals. The intensity of the booms was measured and three types of data (beach counts, frequency of behavior, and heart rate) were collected before and after booms during the breeding seasons of the two species. In addition to the data taken during breeding, beach counts were made before and after booms during the gray seal moult. The greatest range in overpressure within a single boom was 2.70 psf during gray seal breeding and 2.07 psf during harbor seal breeding. No significant differences were found in the behavior or beach counts of gray seals following sonic booms, regardless of the season. Beach counts and most behaviors of harbor seals also did not differ significantly following booms, however, harbor seals became more vigilant. The heart rates of four gray seal mothers and three pups showed no clear change as a result of booms, but six male harbor seals showed a nonsignificant tendency toward elevated heart rates during the 15-s interval of the boom. These results suggest sonic booms produced by the Concorde, in level flight at altitude and producing on average a sonic boom of 0.9 psf, do not substantially affect the breeding behavior of gray or harbor seals.

  18. Conditioning of Spent Sealed Sources in Singapore

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Dae Seok; Kang, Il Sik; Jang, Kyung Duk; Shon, Jong Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    In 2010, IAEA (International Atomic Energy Agency) requested KAERI (Korea Atomic Energy Research Institute) to support Singapore for conditioning spent sealed sources. Once had been used for lightning conductor, check source or smoke detector, various sealed sources were collected and temporarily have been stored at HSA (Health Science Authority) under control of NEA (National Environment Agency) in Singapore. Based on experiences for conditioning of Ra-226 sources in various Asian countries since 2000, KAERI sent an expert team of three members to Singapore for safe management of spent sealed sources in 2011. As a result of conditioning operation, about 575.21 mCi of sealed sources were safely conditioned in 3 cement packages with cooperation of KAERI expert team, IAEA supervisor, NEA staffs and local labors. In this paper, procedure and result of the conditioning operation for the spent sealed sources in Singapore are discussed

  19. A reliable sealing method for microbatteries

    Science.gov (United States)

    Wang, Yuxing; Cartmell, Samuel; Li, Qiuyan; Xiao, Jie; Li, Huidong; Deng, Zhiqun Daniel; Zhang, Ji-Guang

    2017-02-01

    As electronic devices continue to become smaller, their energy sources (i.e., batteries) also need to be smaller. Typically, energy densities of batteries decrease as the battery size decreases due to the relative increase of parasitic weight such as packaging materials. In addition, the sealing methods in conventional batteries are difficult to apply to microbatteries. In this work, we developed a facile sealing method for microbatteries. The method employs a dual-sealing concept: a first rubber barrier temporally confines the organic electrolytes and a second adhesive barrier forms a hermetic seal with the battery case. With this innovative sealing approach, excellent shelf life and operation life of the batteries have been demonstrated. A minimal amount of packing materials is employed resulting in high energy densities.

  20. Does the seal licensing system in Scotland have a negative impact on seal welfare?

    Directory of Open Access Journals (Sweden)

    Laetitia Nunny

    2016-08-01

    Full Text Available This study examined the licensing system that permits seal shooting in Scotland, which was established under Part 6 Conservation of Seals of the Marine (Scotland Act 2010. Four approaches were used: data were collated and analyzed from both the Scottish Government and Scottish Marine Animal Stranding Scheme; a survey was sent to current license holders and informal interviews were conducted with key stakeholder types. Between February 2011 and the end of October 2015, 1229 gray seals and 275 common seals were reported shot under license to the Scottish Government. The numbers of seals reported as shot has reduced year-on-year since the licensing system was put in place. While some license holders, notably fish farms, were using some non-lethal forms of deterrent to reduce seal-related damage, these were often used alongside seal shooting. Of the seals reported as shot to the Scottish Government, only a small percentage were also reported to the Scottish Marine Animal Stranding Scheme, despite this being a licensing requirement. Only 2.3% of the shot gray seals and 4.5% of the shot common seals were necropsied. There is evidence from these necropsies that some seals had not died instantly or had not been shot in the manner recommended by the Scottish Seal Management Code of Practice. These preliminary results show that more carcasses need to be recovered and necropsied if the welfare implications of current seal shooting practice are to be properly assessed. The current legislation does not specify closed seasons to protect breeding seals and thirty-five per cent of necropsied seals were pregnant gray seals. Seals have also been shot during their lactation periods when pups are dependent on their mothers. This raises significant welfare concerns. The re-introduction of closed seasons specific to each species of seal is recommended along with greater effort to deploy non-lethal methods. Independent assessment of the number of seals being killed

  1. 45 CFR 670.19 - Designation of native mammals.

    Science.gov (United States)

    2010-10-01

    ... Designation of native mammals. The following are designated native mammals: Pinnipeds: Crabeater seal—Lobodon carcinophagus. Leopard seal—Hydrurga leptonyx. Ross seal—Ommatophoca rossi. 1 1 These species of mammals have... elephant seal—Mirounga leonina. Southern fur seals—Arctocephalus spp. 1 Weddell seal—Leptonychotes weddelli...

  2. Analysis on the Viscous Pumping in a Magnetic Fluid Seal Under a Rotating Load and the Seal Design

    OpenAIRE

    長屋, 幸助; 大沼, 浩身; 佐藤,淳

    1990-01-01

    This paper discusses effects of viscous pumping in a magnetic fluid seal under a rotating load. The Reynolds equation was presented for the seal based on magnetic fluid mechanics, and the expressions for obtaining pressures in the seal, eccentricities of the rotating shaft due to the viscous pumping and seal pressures were given. Numerical Calculations were carried out for some sample problems, and the effect of magnetic flux densities on the pressure in the seal and the seal pressures were c...

  3. Ocean climate and seal condition

    Directory of Open Access Journals (Sweden)

    Crocker Daniel E

    2005-03-01

    Full Text Available Abstract Background The condition of many marine mammals varies with fluctuations in productivity and food supply in the ocean basin where they forage. Prey is impacted by physical environmental variables such as cyclic warming trends. The weaning weight of northern elephant seal pups, Mirounga angustirostris, being closely linked to maternal condition, indirectly reflects prey availability and foraging success of pregnant females in deep waters of the northeastern Pacific. The aim of this study was to examine the effect of ocean climate on foraging success in this deep-diving marine mammal over the course of three decades, using cohort weaning weight as the principal metric of successful resource accrual. Results The mean annual weaning weight of pups declined from 1975 to the late 1990s, a period characterized by a large-scale, basin-wide warm decadal regime that included multiple strong or long-duration El Niños; and increased with a return to a cool decadal regime from about 1999 to 2004. Increased foraging effort and decreased mass gain of adult females, indicative of reduced foraging success and nutritional stress, were associated with high ocean temperatures. Conclusion Despite ranging widely and foraging deeply in cold waters beyond coastal thermoclines in the northeastern Pacific, elephant seals are impacted significantly by ocean thermal dynamics. Ocean warming redistributes prey decreasing foraging success of females, which in turn leads to lower weaning mass of pups. Annual fluctuations in weaning mass, in turn, reflect the foraging success of females during the year prior to giving birth and signals changes in ocean temperature cycles.

  4. Sealing glasses for titanium and titanium alloys

    Science.gov (United States)

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Barium lanthanoborate sealing-glass compositions are provided comprising various combinations (in terms of mole-%) of boron oxide (B.sub.2 O.sub.3), barium oxide (BaO), lanthanum oxide (La.sub.2 O.sub.3), and at least one other oxide selected from the group consisting of aluminum oxide (Al.sub.2 O.sub.3), calcium oxide (CaO), lithium oxide (Li.sub.2 O), sodium oxide (Na.sub.2 O), silicon dioxide (SiO.sub.2), or titanium dioxide (TiO.sub.2). These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys having an improved aqueous durability and favorable sealing characteristics. Examples of the sealing-glass compositions are provided having coefficients of thermal expansion about that of titanium or titanium alloys, and with sealing temperatures less than about 900.degree. C., and generally about 700.degree.-800.degree. C. The barium lanthanoborate sealing-glass compositions are useful for components and devices requiring prolonged exposure to moisture or water, and for implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  5. Self-Representation on Byzantine Seals

    Directory of Open Access Journals (Sweden)

    Claudia Sode

    2015-10-01

    Full Text Available Sigillography brings to our attention a huge number of individuals that would otherwise have remained unknown. Thousands of seals survive that bear, together with religious images, inscriptions indicating the name of their owner, a title and the office held. Based upon the corpus of published seals, the article investigates the contribution of lead seals to our understanding of identity in Byzantium. The geographic expansion of Byzantium in the tenth and eleventh centuries brought a host of populations within the empire’s frontier which for the most part were not Greek-speaking, including Armenians, Georgians, and Christian Arabs. As a consequence, oriental languages appear on Byzantine seals. The seals often show an image of the Virgin or a Saint on one side and an inscription on the other side, or they bear inscriptions on both sides. The legends can be in Arabic or Syriac, Armenian or Georgian alone or are sometimes “mixed”, for instance in Arabic and Greek or Arabic and Syriac. The seal of Andronikos Rogerios – a Westerner who, however, seems to have been fully integrated into Byzantine society – clearly shows Western influence in the choice of the seals’s image. The article discusses the function of inscriptions and images found on seals as a means of understanding ethnic, social, cultural and linguistic identities.

  6. Tamper-indicating quantum optical seals

    Energy Technology Data Exchange (ETDEWEB)

    Humble, Travis S [ORNL; Williams, Brian P [ORNL

    2015-01-01

    Confidence in the means for identifying when tampering occurs is critical for containment and surveillance technologies. Fiber-optic seals have proven especially useful for actively surveying large areas or inventories due to the extended transmission range and flexible layout of fiber. However, it is reasonable to suspect that an intruder could tamper with a fiber-optic sensor by accurately replicating the light transmitted through the fiber. In this contribution, we demonstrate a novel approach to using fiber-optic seals for safeguarding large-scale inventories with increased confidence in the state of the seal. Our approach is based on the use of quantum mechanical phenomena to offer unprecedented surety in the authentication of the seal state. In particular, we show how quantum entangled photons can be used to monitor the integrity of a fiber-optic cable - the entangled photons serve as active sensing elements whose non-local correlations indicate normal seal operation. Moreover, we prove using the quantum no-cloning theorem that attacks against the quantum seal necessarily disturb its state and that these disturbances are immediately detected. Our quantum approach to seal authentication is based on physical principles alone and does not require the use of secret or proprietary information to ensure proper operation. We demonstrate an implementation of the quantum seal using a pair of entangled photons and we summarize our experimental results including the probability of detecting intrusions and the overall stability of the system design. We conclude by discussing the use of both free-space and fiber-based quantum seals for surveying large areas and inventories.

  7. The gastropod-symbiotic sea anemone genus Isosicyonis Carlgren, 1927 (Actiniaria: Actiniidae: a new species from the Weddell Sea (Antarctica that clarifies the taxonomic position of the genus

    Directory of Open Access Journals (Sweden)

    Estefanía Rodríguez

    2008-03-01

    Full Text Available A second species of the sea anemone genus Isosicyonis is described and illustrated from 16 specimens collected in the Weddell Sea (Antarctica on the Polarstern cruises ANT XVII/3, ANT XXI/2 and ANT XXIII/8. Isosicyonis striata n. sp. is easily distinguishable externally from the other species of the genus Isosicyonis alba by its pattern: white longitudinal stripes on the column, oral disc, and tentacles. It is also distinguished by internal features including the retractor muscles, parietobasilar muscles, marginal sphincter muscles, number of mesenteries, and cnidae. The genus Isosycionis is currently only known from the Southern Ocean. Both species of Isosicyonis live in association with a gastropod, with a single sea anemone occupying almost the whole shell of its gastropod host. The description of this new species, and our re-examination of Isosicyonis alba, resolves the controversial higher taxonomic position of the genus, confirming its placement within the Endomyaria.

  8. Body lengths and temperatures of the crabeater seal Lobodon ...

    African Journals Online (AJOL)

    The following data were collected en route to the South African National Antarctic Expedition base (S.A.N.A.E.) in Queen Maud Land, Antarctica, during the early part of 1964. The route taken by the M.V. "R.S.A." to the base passed through the north-eastern fringes of the. Weddell Sea. This remote area is seldom visited by ...

  9. Testing of sealed lead-acid batteries

    Energy Technology Data Exchange (ETDEWEB)

    Bush, D.M.; Sealey, J.D.; Miller, D.W.

    1984-02-01

    In early January 1981, Sandia National Laboratories began testing sealed lead-acid batteries which were being developed under Sandia contracts. The goal was to develop a totally maintenance-free sealed lead-acid battery capable of deep-discharge operation in a photovoltaic power system. Sealed lead-acid batteries and a group of conventional, flooded lead-acid batteries were exposed to a matrix test plan, with some approaching 1000 cycles. This performance was achieved with the standard National Electrical Manufacturers' Association cycle test, as well as the partial-state-of-charge cycle test. Modes of failure are being investigated.

  10. Floating air riding seal for a turbine

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, Todd A

    2016-08-16

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

  11. Compliant Glass Seals for SOFC Stacks

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Yeong -Shyung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Choi, Jung-Pyung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xu, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephens, Elizabeth V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Koeppel, Brian J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stevenson, Jeffry W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lara-Curzio, Edgar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-04-30

    This report summarizes results from experimental and modeling studies performed by participants in the Solid-State Energy Conversion Alliance (SECA) Core Technology Program, which indicate that compliant glass-based seals offer a number of potential advantages over conventional seals based on de-vitrifying glasses, including reduced stresses during stack operation and thermal cycling, and the ability to heal micro-damage induced during thermal cycling. The properties and composition of glasses developed and/or investigated in these studies are reported, along with results from long-term (up to 5,800h) evaluations of seals based on a compliant glass containing ceramic particles or ceramic fibers.

  12. Aerial surveys of seals at Rødsand seal sanctuary and adjacent haul-out sites

    DEFF Research Database (Denmark)

    Teilmann, J.; Dietz, R.; Edren, Susi M.C.

    This report describes the preliminary results of aerial surveys at Rødsand seal sanctuary, southeast Denmark and adjacent seal haul-out sites in southwestern Baltic. The work was carried out in connection with studies of potential effects of the Nysted offshore wind farm. Rødsand seal sanctuary...... is a part of seal management area 4, and the area is believed to hold a more or less closed population with little exchange to other areas. Although the harbour seal is relatively stationary there may be movements between the haul-out sites in the area. A possible reaction to disturbance from...... the construction and operation of the wind farm may be that the seals use other haul-out sites to a higher extend....

  13. 28 CFR 803.2 - Authority to affix seal.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Authority to affix seal. 803.2 Section... COLUMBIA AGENCY SEAL § 803.2 Authority to affix seal. The Director of CSOSA or PSA (as appropriate) and the Director's designees are authorized to affix the Agency seal (including replicas and reproductions) to...

  14. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Science.gov (United States)

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal or...

  15. 49 CFR 803.3 - Authority to affix Seal.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of the...

  16. 4 CFR 202.2 - Authority to affix seal.

    Science.gov (United States)

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Authority to affix seal. 202.2 Section 202.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.2 Authority to affix seal. (a) The following officials of the Board are authorized to affix the official seal (including reproductions) to...

  17. 17 CFR 2.3 - Prohibitions against misuse of seal.

    Science.gov (United States)

    2010-04-01

    ... seal. 2.3 Section 2.3 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.3 Prohibitions against misuse of seal. (a) Fraudulently or wrongfully affixing or impressing the Seal to or upon any certificate, instrument, document or paper or with knowledge of its fraudulent...

  18. 34 CFR 3.3 - Authority to affix seal.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Authority to affix seal. 3.3 Section 3.3 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.3 Authority to affix seal. The Secretary and the Secretary's designees are authorized to affix the Official Seal, replicas, reproductions...

  19. Development of a magnetic liquid seal for clean robots

    Science.gov (United States)

    Mizumoto, M.; Inoue, H.

    1987-03-01

    A magnetic liquid seal is developed for clean robots used in semiconductor producing factories. This seal is made of a O-ring type elastic magnet in which magnetic liquid is attracted to the magnet directly. The results of experimental tests prove that the newly developed seal affords reliable sealing performance for clean robots in a cleanness class of 10 or less.

  20. HMSRP Hawaiian Monk Seal Survey Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of Hawaiian monk seal and green turtle sightings in the Northwestern Hawaiian Islands (NWHI) since 1982 at Lisianski Island, and since...

  1. Improved Gas Seal for Electrolytic Cells

    Science.gov (United States)

    Richter, R.

    1984-01-01

    Breakage by differential thermal expansion reduced. Cells for hot electrolysis of gases improved by design that reduces vulnerability of gas seals to breakage at operating temperature of about 1000 degrees C.

  2. HMSRP Hawaiian Monk Seal Photo Identification Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This photo collection contains identification and other images and video of Hawaiian monk seals taken by PSD personnel and cooperating scientists as part of the...

  3. Fuel cell cassette with compliant seal

    Science.gov (United States)

    Karl, Haltiner, Jr. J.; Anthony, Derose J.; Klotzbach, Darasack C.; Schneider, Jonathan R.

    2017-11-07

    A fuel cell cassette for forming a fuel cell stack along a fuel cell axis includes a cell retainer, a plate positioned axially to the cell retainer and defining a space axially with the cell retainer, and a fuel cell having an anode layer and a cathode layer separated by an electrolyte layer. The outer perimeter of the fuel cell is positioned in the space between the plate and the cell retainer, thereby retaining the fuel cell and defining a cavity between the cell retainer, the fuel cell, and the plate. The fuel cell cassette also includes a seal disposed within the cavity for sealing the edge of the fuel cell. The seal is compliant at operational temperatures of the fuel cell, thereby allowing lateral expansion and contraction of the fuel cell within the cavity while maintaining sealing at the edge of the fuel cell.

  4. HMSRP Hawaiian Monk Seal Tag Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all tags applied to Hawaiian monk seals since 1981. These tags were applied by PSD personnel and cooperating scientists as part of...

  5. Epoxy resins used to seal brachytherapy seed

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Natalia Carolina Camargos; Ferraz, Wilmar Barbosa; Reis, Sergio Carneiro dos; Santos, Ana Maria Matildes dos, E-mail: nccf@cdtn.br, E-mail: ferrazw@cdtn.br, E-mail: reissc@cdtn.br, E-mail: amms@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, BH (Brazil)

    2013-07-01

    Prostate cancer treatment with brachytherapy is recommended for patients with cancer at an early stage. In this treatment, small radioactive seeds are implanted directly in the prostate gland. These seeds are composed at least of one radionuclide carrier and an X-ray marker enclosed within a metallic tube usually sealed by laser process. This process is expensive and, furthermore, it can provoke a partial volatilization of the radionuclide and change the isotropy in dose distribution around the seed. In this paper, we present a new sealing process using epoxy resin. Three kinds of resins were utilized and characterized by scanning electron microscopy (SEM), energy dispersive X ray (EDS) and by differential scanning calorimetry (DSC) after immersion in simulated body fluid (SBF) and in sodium iodine solution (NaI). The sealing process showed excellent potential to replace the sealing laser usually employed. (author)

  6. HMSRP Hawaiian Monk Seal Fisheries Interactions data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains records of all documented hookings and/or entanglements of Hawaiian monk seals with actively fished gear, both commercial and recreational. The...

  7. HMSRP Hawaiian Monk Seal Microsatellite Genotypes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Currently ~2,400 Hawaiian monk seal specimens have been analyzed genetically, providing genotypes at 18 microsatellite loci. These data are organized by individual,...

  8. Prevention of Stripping under Chip Seals

    Science.gov (United States)

    2017-10-01

    Eighteen chip-sealed roadways in eight cities and counties in Minnesota were evaluated both in the field (for condition surveys and density tests) and in the laboratory (for permeability, stripping, tensile-strength ratio, asphalt film thickness, and...

  9. Chip seal performance measures : best practices.

    Science.gov (United States)

    2015-03-01

    The Washington State Department of Transportation (WSDOT) has a long history of designing, constructing, : and maintaining chip seal or bituminous surface treatment pavements. However, to date WSDOT has not : developed pavement performance indicators...

  10. Onboard Acoustic Recording from Diving Elephant Seals

    National Research Council Canada - National Science Library

    Fletcher, Stacia

    1996-01-01

    The aim of this project was to record sounds impinging on free-ranging northern elephant seals, Mirounga angustirostris, a first step in determining the importance of LFS to these animals as they dive...

  11. Contamination and potential impacts to monk seals

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — There are six main Hawaiian monk seal breeding colonies (French Frigate Shoals, Kure Atoll, Laysan Island, Lisianski Island, Pearl and Hermes Reef and Midway Atoll)...

  12. Collyria seals in the Roman Empire.

    Science.gov (United States)

    Perez-Cambrodi, Rafael J; Pinero, David P; Mavrou, Ariadni; Cervino, Alejandro; Brautaset, Rune; Murube del Castillo, Juan

    2013-01-01

    Roman seals associated with collyria (Latin expression for eye drops/washes and lotions for eye maintenance) provide valuable information about eye care in the antiquity. These small, usually stone-made pieces bore engravings with the names of eye doctors and also the collyria used to treat an eye disease. The collyria seals have been found all over the Roman empire and Celtic territories in particular and were usually associated with military camps. In Hispania (Iberian Peninsula), only three collyria seals have been found. These findings speak about eye care in this ancient Roman province as well as about of the life of the time. This article takes a look at the utility and social significance of the collyria seals and seeks to give an insight in the ophthalmological practice of in the Roman Empire.

  13. HMSRP Hawaiian Monk Seals on Social Media

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — As social media platforms develop, they potentially provide valuable information for wildlife researchers and managers. NOAA’s Hawaiian Monk Seal Research Program...

  14. HMSRP Hawaiian Monk Seal Survival Factors

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of survival factors recorded by PSD personnel and cooperating scientists as part of the ongoing monk seal population assessment...

  15. HMSRP Hawaiian Monk Seal Necropsy Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains information on Hawaiian monk seal gross necropsy (in some cases only field notes or minimal information) and histopathology results beginning...

  16. Infiltrating/sealing proximal caries lesions

    DEFF Research Database (Denmark)

    Martignon, S; Ekstrand, K R; Gomez, J

    2012-01-01

    This randomized split-mouth controlled clinical trial aimed at assessing the therapeutic effects of infiltration vs. sealing for controlling caries progression on proximal surfaces. Out of 90 adult students/patients assessed at university clinics and agreeing to participate, 39, each with 3...... differences in lesion progression between infiltration and placebo (P = 0.0012) and between sealing and placebo (P = 0.0269). The study showed that infiltration and sealing are significantly better than placebo treatment for controlling caries progression on proximal lesions. No significant difference...... proximal lesions identified radiographically around the enamel-dentin junction to the outer third of the dentin, were included. Lesions were randomly allocated for treatment to test-A (Infiltration: ICON-pre-product; DMG), test-B (Sealing: Prime-Bond-NT; Dentsply), or control-C (Placebo). Primary outcome...

  17. Detection of seal contamination in heat-sealed food packaging based on active infrared thermography

    Science.gov (United States)

    D'huys, Karlien; Saeys, Wouter; De Ketelaere, Bart

    2015-05-01

    In the food industry packaging is often applied to protect the product from the environment, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the material used and the closure (seal). The material is selected based on the specific needs of the food product to be wrapped. However, proper closure of the package is often harder to achieve. One problem possibly jeopardizing seal quality is the presence of food particles between the seal. Seal contamination can cause a decreased seal strength and thus an increased packaging failure risk. It can also trigger the formation of microchannels through which air and microorganisms can enter and spoil the enclosed food. Therefore, early detection and removal of seal-contaminated packages from the production chain is essential. In this work, a pulsed-type active thermography method using the heat of the sealing bars as an excitation source was studied for detecting seal contamination. The cooling profile of contaminated seals was recorded. The detection performance of four processing methods (based on a single frame, a fit of the cooling profile, pulsed phase thermography and a matched filter) was compared. High resolution digital images served as a reference to quantify contamination. The lowest detection limit (equivalent diameter of 0.63 mm) and the lowest processing time (0.42 s per sample) were obtained for the method based on a single frame. Presumably, practical limitations in the recording stage prevented the added value of active thermography to be fully reflected in this application.

  18. Troubleshooting ProSeal LMA

    Directory of Open Access Journals (Sweden)

    Bimla Sharma

    2009-01-01

    Full Text Available Supraglottic devices have changed the face of the airway management. These devices have contributed in a big way in airway management especially, in the difficult airway scenario significantly decreasing the pharyngolaryngeal morbidity. There is a plethora of these devices, which has been well matched by their wider acceptance in clinical practice. ProSeal laryngeal mask airway (PLMA is one such frequently used device employed for spontaneous as well as controlled ventilation. However, the use of PLMAat tunes maybe associated with certain problems. Some of the problems related with its use are unique while others are akin to the classic laryngeal mask airway (eLMA. However, expertise is needed for its safe and judicious use, correct placement, recognition and management of its various malpositions and complications. The present article describes the tests employed for proper confirmation of placementto assess the ventilatooy and the drain tube functions of the mask, diagnosis of various malpositions and the management of these aspects. All these areas have been highlighted under the heading of troubleshooting PLMA. Many problems can be solved by proper patient and procedure selection, maintaining adequate depth of anaesthesia, diagnosis and management of malpositions. Proper fixation of the device and monitoring cuff pressure intraopera-tively may bring down the incidence of airway morbidity.

  19. Anodizing And Sealing Aluminum In Nonchromated Solutions

    Science.gov (United States)

    Emmons, John R.; Kallenborn, Kelli J.

    1995-01-01

    Improved process for anodizing and sealing aluminum involves use of 5 volume percent sulfuric acid in water as anodizing solution, and 1.5 to 2.0 volume percent nickel acetate in water as sealing solution. Replaces process in which sulfuric acid used at concentrations of 10 to 20 percent. Improved process yields thinner coats offering resistance to corrosion, fatigue life, and alloy-to-alloy consistency equal to or superior to those of anodized coats produced with chromated solutions.

  20. Emergency sacrificial sealing method in filters, equipment, or systems

    Science.gov (United States)

    Brown, Erik P.

    2017-02-28

    A system seals a filter or equipment component to abase and will continue to seal the filter or equipment component to the base in the event of hot air or fire. The system includes a first sealing material between the filter or equipment component and the base; and a second sealing material between the filter or equipment component and the base and proximate the first sealing material. The first sealing material and the second seal material are positioned relative to each other and relative to the filter or equipment component and the base to seal the filter or equipment component to the base and upon the event of fire the second sealing material will be activated and expand to continue to seal the filter or equipment component to the base in the event of hot air or fire.

  1. Investigations of Shuttle Main Landing Gear Door Environmental Seals

    Science.gov (United States)

    Finkbeiner, Joshua; Dunlap, Pat; Steinetz, Bruce; DeMango, Jeff; Newswander, Daniel

    2005-01-01

    The environmental seals for the main landing gear doors of the Shuttle Orbiters were raised by the Columbia Accident Investigation Board as a potential safety concern. Inspections of seals installed on the Shuttle Discovery revealed that they were permanently deformed and no longer met certified seal compression requirements. Replacement of the seals led to the inability to fully close the main landing gear doors. Johnson Space Center requested that Glenn Research Center conduct tests on the main landing gear door environmental seals to assist in installing the seals in a manner to allow the main landing gear doors to fully close. Further testing was conducted to fill out the seal performance database. Results from the testing indicated that the method of bonding the seals was important in reducing seal loads on the main landing gear doors. Also, the replacement seals installed in Shuttle Discovery were found to have leakage performance sufficient to meet the certification requirements.

  2. Distribution and abundance of marine bird and pinniped populations within Port Foster, Deception Island, Antarctica

    Science.gov (United States)

    Kendall, Katrina A.; Ruhl, Henry A.; Wilson, Robert C.

    2003-06-01

    Seabirds and pinnipeds were surveyed during four cruises from March 1999 to November 2000 at Port Foster, Deception Island, Antarctica. Abundances and distributions of three species of pinnipeds, Arctocephalus gazella (Antarctic fur seals), Leptonychotes weddelli (Weddell seals), and Lobodon carcinophagus (crabeater seals), and 11 species of marine birds were documented within Port Foster. A. gazella was the dominant pinniped within Port Foster; its abundance has increased since the 1986/87 austral summer season. A. gazella were concentrated at the entrance to Port Foster. More pinnipeds were observed during the austral summer than during the spring. The most dominant seabird, Pygoscelis antarctica (chinstrap penguin), was concentrated along the rocky cliffs behind the beaches where A. gazella hauled out. Larus dominicanus (kelp gull) and Daption capense (cape petrel) were the most dominant flying seabirds. All other seabird species were more widely distributed around Port Foster than P. antarctica. There was no clear trend in abundances of seabirds over the study period. It is possible that the protected area of Port Foster provides refuge for vagrants of colonies along the outer periphery of the island and as a stopover point for migrating species.

  3. A Comparison of Candidate Seal Designs for Future Docking Systems

    Science.gov (United States)

    Dunlap, Patrick, H., Jr.; Steinetz, Bruce, M.

    2012-01-01

    NASA is developing a new docking system to support future space exploration missions to low Earth orbit, the Moon, and other destinations. A key component of this system is the seal at the main docking interface which inhibits the loss of cabin air once docking is complete. Depending on the mission, the seal must be able to dock in either a seal-on-flange or seal-on-seal configuration. Seal-on-flange mating would occur when a docking system equipped with a seal docks to a system with a flat metal flange. This would occur when a vehicle docks to a node on the International Space Station. Seal-on-seal mating would occur when two docking systems equipped with seals dock to each other. Two types of seal designs were identified for this application: Gask-O-seals and multi-piece seals. Both types of seals had a pair of seal bulbs to satisfy the redundancy requirement. A series of performance assessments and comparisons were made between the candidate seal designs indicating that they meet the requirements for leak rate and compression and adhesion loads under a range of operating conditions. Other design factors such as part count, integration into the docking system tunnel, seal-on-seal mating, and cost were also considered leading to the selection of the multi-piece seal design for the new docking system. The results of this study can be used by designers of future docking systems and other habitable volumes to select the seal design best-suited for their particular application.

  4. Self-balancing air riding seal for a turbine

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Jacob A.

    2017-08-15

    A turbine of a gas turbine engine has an air riding seal that forms a seal between a rotor and a stator of the turbine, the air riding seal including an annular piston movable in an axial direction under the influence of a pressure on one side with a pressure acting on an opposite side that self-balances the air riding seal during the steady state condition of the engine and lifts off the seal during engine transients.

  5. Seroprevalence of Antibodies against Seal Influenza A(H10N7 Virus in Harbor Seals and Gray Seals from the Netherlands.

    Directory of Open Access Journals (Sweden)

    Rogier Bodewes

    Full Text Available In the spring and summer 2014, an outbreak of seal influenza A(H10N7 virus infection occurred among harbor seals (Phoca vitulina off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were reported dead in Sweden, Denmark and Germany, only a limited number of seals were found dead in the Netherlands. To determine the extent of exposure of seals in the Netherlands to influenza A/H10N7 virus, we measured specific antibody titers in serum samples from live-captured seals and seals admitted for rehabilitation in the Netherlands by use of a hemagglutination inhibition assay and an ELISA. In harbor seals in 2015, antibodies against seal influenza A(H10N7 virus were detected in 41% (32 out of 78 pups, 10% (5 out of 52 weaners, and 58% (7 out of 12 subadults or adults. In gray seals (Halichoerus grypus in 2015, specific antibodies were not found in the pups (n = 26, but in 26% (5 out of 19 of the older animals. These findings indicate that, despite apparent low mortality, infection with seal influenza A(H10N7 virus was geographically widespread and also occurred in grey seals.

  6. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands.

    Science.gov (United States)

    Bodewes, Rogier; Rubio García, Ana; Brasseur, Sophie M; Sanchez Conteras, Guillermo J; van de Bildt, Marco W G; Koopmans, Marion P G; Osterhaus, Albert D M E; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were reported dead in Sweden, Denmark and Germany, only a limited number of seals were found dead in the Netherlands. To determine the extent of exposure of seals in the Netherlands to influenza A/H10N7 virus, we measured specific antibody titers in serum samples from live-captured seals and seals admitted for rehabilitation in the Netherlands by use of a hemagglutination inhibition assay and an ELISA. In harbor seals in 2015, antibodies against seal influenza A(H10N7) virus were detected in 41% (32 out of 78) pups, 10% (5 out of 52) weaners, and 58% (7 out of 12) subadults or adults. In gray seals (Halichoerus grypus) in 2015, specific antibodies were not found in the pups (n = 26), but in 26% (5 out of 19) of the older animals. These findings indicate that, despite apparent low mortality, infection with seal influenza A(H10N7) virus was geographically widespread and also occurred in grey seals.

  7. Experiment on wear behavior of high pressure gas seal faces

    Science.gov (United States)

    Xu, Jing; Peng, Xudong; Bai, Shaoxian; Meng, Xiangkai; Li, Jiyun

    2014-11-01

    Current researches show that mechanical deformation of seal ring face makes fluid film clearance decrease at high pressure side, thus a divergent clearance is formed and face wear occurs more seriously at the high pressure side than that on the low pressure side. However, there is still lack of published experimental works enough to prove the theoretical results. In this paper, a spiral groove dry gas seal at high pressures is experimentally investigated so as to prove the face wear happened at the high pressure side of seal faces due to the face mechanical deformation, and the wear behavior affected by seal ring structure is also studied. The experimental results show that face wear would occur at the high pressure side of seal faces due to the deformation, thus the leakage and face temperature increase, which all satisfies the theoretical predictions. When sealed pressure is not less than 5 MPa, the pressure can provide enough opening force to separate the seal faces. The seal ring sizes have obvious influence on face wear. Face wear, leakage and face temperature of a dry gas seal with the smaller cross sectional area of seal ring are less than that of a dry gas seal with bigger one, and the difference of leakage rate between these two sizes of seal face width is in the range of 24%-25%. Compared with the effect of seal ring sizes, the effect of secondary O-ring seal position on face deformation and face wear is less. The differences between these two types of dry gas seals with different secondary O-ring seal positions are less than 5.9% when the rotational speed varies from 0 to 600 r/min. By linking face wear and sealing performance changes to the shift in mechanical deformation of seal ring, this research presents an important experimental method to study face deformation of a dry gas seal at high pressures.

  8. Labyrinth Seal Analysis. Volume 3. Analytical and Experimental Development of a Design Model for Labyrinth Seals

    Science.gov (United States)

    1986-01-01

    JAPANESE SOCIETY OF LUBRICATION ENGINEERS, VOL. 14, NO. St MAY, 1969, PP. 243-250. (JAPANESE) KOMOTORI, KAZUNARI. CONTACTFREE SEALS, CORONA PUBLISHING CO...CLEVELAND, OHIO, JULY, 1976. iODA 79-0024) SILL, ROBERT C. PLASMA-SPRAYEO ZIRCONIA GAS PATH SEAL TECHNOLOGY A STATE-OF-THE-ART REVIEW, NASA TM 79273

  9. Why do seals have cones? Behavioural evidence for colour-blindness in harbour seals.

    Science.gov (United States)

    Scholtyssek, Christine; Kelber, Almut; Dehnhardt, Guido

    2015-03-01

    All seals and cetaceans have lost at least one of two ancestral cone classes and should therefore be colour-blind. Nevertheless, earlier studies showed that these marine mammals can discriminate colours and a colour vision mechanism has been proposed which contrasts signals from cones and rods. However, these earlier studies underestimated the brightness discrimination abilities of these animals, so that they could have discriminated colours using brightness only. Using a psychophysical discrimination experiment, we showed that a harbour seal can solve a colour discrimination task by means of brightness discrimination alone. Performing a series of experiments in which two harbour seals had to discriminate the brightness of colours, we also found strong evidence for purely scotopic (rod-based) vision at light levels that lead to mesopic (rod-cone-based) vision in other mammals. This finding speaks against rod-cone-based colour vision in harbour seals. To test for colour-blindness, we used a cognitive approach involving a harbour seal trained to use a concept of same and different. We tested this seal with pairs of isoluminant stimuli that were either same or different in colour. If the seal had perceived colour, it would have responded to colour differences between stimuli. However, the seal responded with "same", providing strong evidence for colour-blindness.

  10. Corrosion sealing of amalgam restorations in vitro.

    Science.gov (United States)

    Mahler, David B; Pham, Bao V; Adey, Jerry D

    2009-01-01

    Amalgam restorations, when first placed, have been shown to exhibit a gap at the amalgam/tooth interface. With time in service, this gap fills with corrosion products that have the potential to "seal" the restoration. With the advent of high-copper, more corrosion-resistant amalgams, there has been concern that the time required to create this seal would be increased significantly when compared with low-copper traditional amalgams. The current study was designed to address this concern. Amalgam was condensed into a MACOR mold, simulating a Class I cavity form and then immersed into a 1.0% NaCl solution to simulate oral conditions. Using an air pressure test, the sealing was monitored over time. The results showed that the sealing was influenced by the size of the initial gap prior to immersion as well as corrosion resistance of the amalgam and that a corrosion-resistant amalgam with a small initial gap size can seal as quickly as a corrosion-prone amalgam. Therefore, it is not possible to predict sealing behavior based on corrosion resistance, alone. Furthermore, the presence of zinc in the amalgam alloy has been shown to result in the formation of zinc corrosion products in the amalgam/mold margin, which contributes to more rapid sealing. Analysis of a tooth extracted after 16 years of clinical service that had been restored with an amalgam-containing zinc was also shown to contain zinc corrosion products in the occlusal marginal area. This could explain the reported reduction in marginal fracture of clinically placed amalgam restorations made from zinc-containing alloys.

  11. Development of a Whole Container Seal

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, Michael J [ORNL; Pickett, Chris A [ORNL; Stinson, Brad J [ORNL; Rowe, Nathan C [ORNL

    2014-01-01

    This paper outlines a technique for utilizing electrically conductive textiles as a whole container seal. This method has the potential to provide more robustness for ensuring that the container has not been breached versus conventional sealing methods that only provide tamper indication at the area used for normal access. The conductive textile is used as a distributed sensor for detecting and localizing container tamper or breach. For sealing purposes, the conductive fabric represents a bounded, near-infinite grid of resistors. The well-known infinite resistance grid problem was used to model and confirm the expected accuracy and validity of this approach. An experimental setup was built that uses a multiplexed Wheatstone bridge measurement to determine the resistances of a coarse electrode grid across the conductive fabric. Non-uniform resistance values of the grid infer the presence of damage or tears in the fabric. Results suggest accuracy proportional to the electrode spacing in determining the presence and location of disturbances in conductive fabric samples. Current work is focused on constructing experimental prototypes for field and environmental testing to gauge the performance of these whole container seals in real world conditions. We are also developing software and hardware to interface with the whole container seals. The latest prototypes are expected to provide more accuracy in detecting and localizing events, although detection of a penetration should be adequate for most sealing applications. We are also developing smart sensing nodes that integrate digital hardware and additional sensors (e.g., motion, humidity) into the electrode nodes within the whole container seal.

  12. Solid oxide fuel cell having a glass composite seal

    Science.gov (United States)

    De Rose, Anthony J.; Mukerjee, Subhasish; Haltiner, Jr., Karl Jacob

    2013-04-16

    A solid oxide fuel cell stack having a plurality of cassettes and a glass composite seal disposed between the sealing surfaces of adjacent cassettes, thereby joining the cassettes and providing a hermetic seal therebetween. The glass composite seal includes an alkaline earth aluminosilicate (AEAS) glass disposed about a viscous glass such that the AEAS glass retains the viscous glass in a predetermined position between the first and second sealing surfaces. The AEAS glass provides geometric stability to the glass composite seal to maintain the proper distance between the adjacent cassettes while the viscous glass provides for a compliant and self-healing seal. The glass composite seal may include fibers, powders, and/or beads of zirconium oxide, aluminum oxide, yttria-stabilized zirconia (YSZ), or mixtures thereof, to enhance the desirable properties of the glass composite seal.

  13. Method and system to facilitate sealing in gas turbines

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Victor John; Foster, Gregory Thomas; Sarawate, Neelesh Nandkumar

    2017-09-12

    A method and system for sealing between components within a gas turbine is provided. A first recess defined in a first component receives a seal member. A second recess defined in a second component adjacent the first component also receives the seal member. The first and second recesses are located proximate a hot gas path defined through the gas turbine, and define circumferential paths about the turbine axis. The seal member includes a sealing face that extends in a direction substantially parallel to the turbine axis. The seal member also includes a plurality of seal layers, wherein at least one of the seal layers includes at least one stress relief region for facilitating flexing of the first seal member.

  14. Advanced helium purge seals for Liquid Oxygen (LOX) turbopumps

    Science.gov (United States)

    Shapiro, Wilbur; Lee, Chester C.

    1989-01-01

    Program objectives were to determine three advanced configurations of helium buffer seals capable of providing improved performance in a space shuttle main engine (SSME), high-pressure liquid oxygen (LOX) turbopump environment, and to provide NASA with the analytical tools to determine performance of a variety of seal configurations. The three seal designs included solid-ring fluid-film seals often referred to as floating ring seals, back-to-back fluid-film face seals, and a circumferential sectored seal that incorporated inherent clearance adjustment capabilities. Of the three seals designed, the sectored seal is favored because the self-adjusting clearance features accommodate the variations in clearance that will occur because of thermal and centrifugal distortions without compromising performance. Moreover, leakage can be contained well below the maximum target values; minimizing leakage is important on the SSME since helium is provided by an external tank. A reduction in tank size translates to an increase in payload that can be carried on board the shuttle. The computer codes supplied under this program included a code for analyzing a variety of gas-lubricated, floating ring, and sector seals; a code for analyzing gas-lubricated face seals; a code for optimizing and analyzing gas-lubricated spiral-groove face seals; and a code for determining fluid-film face seal response to runner excitations in as many as five degrees of freedom. These codes proved invaluable for optimizing designs and estimating final performance of the seals described.

  15. Tags and seals for arms control verification

    Energy Technology Data Exchange (ETDEWEB)

    DeVolpi, A.

    1990-09-18

    Tags and seals have long been recognized as important tools in arms control. The trend in control of armaments is to limit militarily significant equipment that is capable of being verified through direct and cooperative means, chiefly on-site inspection or monitoring. Although this paper will focus on the CFE treaty, the role of tags and seals for other treaties will also be addressed. Published technology and concepts will be reviewed, based on open sources. Arms control verification tags are defined as unique identifiers designed to be tamper-revealing; in that respect, seals are similar, being used as indicators of unauthorized access. Tamper-revealing tags might be considered as single-point markers, seals as two-point couplings, and nets as volume containment. The functions of an arms control tag can be considered to be two-fold: to provide field verification of the identity of a treaty-limited item (TLI), and to have a means of authentication of the tag and its tamper-revealing features. Authentication could take place in the field or be completed elsewhere. For CFE, the goal of tags and seals can be to reduce the overall cost of the entire verification system.

  16. Dynamic tester for rotor seals and bearings

    Science.gov (United States)

    Vonpragenau, George L. (Inventor)

    1993-01-01

    A dynamic tester for testing vibration damping seals and bearings is constructed having a hollow shaft extending through the seal or bearing, with the shaft internally supported at each end by fluid bearings on hollow bosses connected to an interior of an enclosure, with no rolling members connected to the shaft is described. A high pressure working fluid is forced through the hollow bosses to operate the bearings. Additionally, the shaft is provided with a reaction turbine that angularly vents a portion of the high pressure working fluid in order to rotate the shaft at high speed, up to 40,000 rpm. The seal or bearing is mounted in a bushing, in turn supported by rods to a shaking device that vibrates the seal or bearing as the shaft is rotated. A plurality of proximity sensors are mounted from outside the enclosure to sense shaft and seal bushing vibrations, and a plurality of pressure ports are disposed in the enclosure to allow sensing of dynamic and static pressures of the testing apparatus.

  17. Tribological Studies of Dynamic Thermal Seal Materials

    Science.gov (United States)

    DeMange, Jeffrey J.; Taylor, Shawn C.

    2016-01-01

    Thermal seals are required on high-speed vehicles in many dynamic applications such as variable inlets in propulsion systems and control surfaces. These seals, often referred to as dynamic thermal seals, must not only mitigate inboard heat transfer, but must also exhibit sufficient durability when scrubbed against mating surfaces. For high-temperature high-speed vehicle applications, the mating surfaces are often made from thermal protection system (TPS) materials, which are typically rougher and more abrasive than TPS materials used at lower temperatures. The high-temperature TPS materials used can include non-ablative (e.g., lightweight porous oxides, ceramic matrix composites) andor ablative systems (e.g., phenolic systems). Due to the increased need for durable high-temperature dynamic seals, researchers working with the NASA Glenn Research Center embarked on an effort to (a) characterize the tribological performance of state-of-the-art thermal seal materials against a variety of TPS materials and (b) develop approaches for improved wear resistance. Tests were conducted using a recently upgraded high-temperature tribometer to assess wear resistance for a variety of tribopairs under multiple conditions. This data will begin to frame the challenges of using these materials and eventually permit an improved ability to design and implement these critical TPS components.

  18. The status of grey seals in Britain

    Directory of Open Access Journals (Sweden)

    C D Duck

    2013-10-01

    Full Text Available Grey seal pup production in Scotland was estimated through annual aerial surveys of the main grey seal breeding colonies. Between 3 and 7 counts of pups were obtained for each colony at intervals through the course of the breeding season. Pup production for individual colonies was estimated from the series of counts using a maximum likelihood model. At 3 colonies, 2 in England, annual pup production was estimated using ground counts. Between the early 1960s and the early 1990s, grey seal pup production progressively increased. At colonies in the Inner and Outer Hebrides, production appeared to stabilize during the 1990s and has remained so. Pup production at colonies in Orkney and in the North Sea has continued to increase but in recent years the rate of increase has declined. This may imply that the UK grey seal population is reaching some limit to its size. The observed changes in pup production imply that some density dependent factors are affecting the British grey seal population. Changes in either juvenile survival and/or female fecundity are the most likely options. Without knowing which of these, or what combination of these factors, is operating, estimating total population size is complicated.

  19. Application of polyimide actuator rod seals

    Science.gov (United States)

    Watermann, A. W.; Gay, B. F.; Robinson, E. D.; Srinath, S. K.; Nelson, W. G.

    1972-01-01

    Development of polyimide two-stage hydraulic actuator rod seals for application in high-performance aircraft was accomplished. The significant portion of the effort was concentrated on optimization of the chevron and K-section second-stage seal geometries to satisfy the requirements for operation at 450 K (350 F) with dynamic pressure loads varying between 200 psig steady-state and 1500 psig impulse cycling. Particular significance was placed on reducing seal gland dimension by efficiently utilizing the fatigue allowables of polyimide materials. Other objectives included investigation of pressure balancing techniques for first-stage polyimide rod seals for 4000 psig 450 K(350 F) environment and fabrication of a modular retainer for the two-stage combination. Seals were fabricated in 0.0254 m (1.0in.) and 0.0635 m (2.5in.) sizes and tested for structural integrity, frictional resistance, and endurance life. Test results showed that carefully designed second stages using polyimides could be made to satisfy the dynamic return pressure requirements of applications in high-performance aircraft. High wear under full system pressure indicated that further research is necessary to obtain an acceptable first-stage design. The modular retainer was successfully tested and showed potential for new actuator applications.

  20. Seal assembly with anti-rotation pin for high pressure supercritical fluids

    Science.gov (United States)

    Wright, Steven A.; Fuller, Robert L.

    2014-08-05

    A seal assembly for sealing a machine with a first chamber and a second chamber is provided. A rotating shaft extends through the first and second chambers, and rotates therein. The seal assembly has a seal housing, a seal ring and a seal pin. The seal housing is positionable in the machine housing. The seal housing has a seal pocket extending into a fluid side thereof, and a housing receptacle extending into an inner diameter thereof at the seal pocket. The seal ring is positionable in the seal pocket of the seal housing for forming a seal therewith. The seal ring has a ring receptacle extending into an outer diameter thereof. The ring receptacle is positionable adjacent to the housing receptacle for defining a pin hole therebetween. The seal pin is loosely positionable in the pin hole whereby movement about the seal ring is accommodated while preventing rotation thereof.

  1. Properties of Sealing Materials in Groundwater Wells

    DEFF Research Database (Denmark)

    Köser, Claus

    years collected data on water chemistry from groundwater wells throughout the country. Based on these data it has been found that the levels of pesticides and their degradation products have been exceeded in many cases. The content of pesticides and degradation products can be the results of leaky...... pellets as sealing material in groundwater wells. The way and the pattern, in which bentonite pellets are deposited, have been shown to have an effect on the swelling pressure of the bentonite seal. During the transport phase of pellets from the terrain to a given sedimentation depth, a sorting process...... in this Ph.D. thesis, a number of recommendations has been offered; i) a change regarding the production of pellets and ii) how sealing material must be treated in the actual construction of groundwater wells....

  2. Thermohaline structure and water masses in the north of Antarctic Peninsula from data collected in situ by southern elephant seals (Mirounga leonina

    Directory of Open Access Journals (Sweden)

    Ilana E. K. C. Wainer

    2013-04-01

    Full Text Available The Western Antarctic Peninsula is rapidly warming and exhibits high indices of biodiversity concentrated mostly along its continental shelf. This region has great importance due to the the mixing caused by the interaction of waters from Weddell Sea (MW, Bransfield Strait (EB and the Antarctic Circumpolar Current (CCA transmits thermohaline characteristics and nutrients of different sites and finally connects with all the world’s oceans. However, studies focusing on the temporal variability of the region’s oceanographic conditions that finally determine the water mass formation are sparse due to the logistical difficulties of conducting oceanographic surveys and traditional monitoring during the winter. For this study, variations of the thermohaline structure and water masses in the vicinity and below the sea ice in the North of the Antarctic Peninsula (AP and Scotia Sea (SS were recorded between February and November 2008 by two female southern elephant seals (SES, Mirounga leonina tagged with Conductivity–Temperature–Depth/Satellite-Relay Data Logger (CTD–SRDL. One thousand three hundred and thirty vertical profiles of temperature and salinity were collected by seals which were tagged by the MEOP-BR Project team at the Elephant Island, South Shetlands. These profiles, together with spread state diagrams allowed the identification of water masses and their variances in the ocean’s vertical structure. Among the set of identified water masses we cite: Antarctic Surface Water (AASW, Winter Water (WW, Warm Deep Water (WDW, Modified Warm Deep Water (MWDW, Circumpolar Deep Water (CDW, Upper Circumpolar Deep Water (UCDW, Lower Circumpolar Deep Water (LCDW and Ice Shelf Water (ISW. Our results show that the oceanic vertical structure undergoes changes that cannot be traditionally monitored, particularly during the Austral winter and that SES are important and modern oceanographic data collection platforms allowing for the improvement of our

  3. Miniature magnetic fluid seal working in liquid environments

    Energy Technology Data Exchange (ETDEWEB)

    Mitamura, Yoshinori, E-mail: ymitamura@par.odn.ne.jp [Graduate School of Information Science and Technology, Hokkaido University, Sapporo 060-0814 (Japan); Durst, Christopher A., E-mail: chris@procyrion.com [Procyrion, Inc., Houston, TX 77027 (United States)

    2017-06-01

    This study was carried out to develop a miniature magnetic fluid (MF) seal working in a liquid environment. The miniature MF seal is intended for use in a catheter blood pump. The requirements for the MF seal included a size of less than Ø4×4.5 mm, shaft diameter of 1 mm, sealing pressure of 200 mmHg, shaft speed of up to 40000 rpm, and life of one month. The miniature MF seal was composed of an NdFeB magnet (Ø4×Ø2×1) sandwiched between two pole pieces (Ø4×Ø1.1×0.5). A shield (Ø4×Ø1.2×1.5) was placed on the pole piece facing the liquid to minimize the influence of pump flow on the MF. The seal was installed on a Ø1 shaft. A seal was formed by injecting MF (Ms: 47.8 kA/m and η: 0.5 Pa·sec) into the gap between the pole pieces and the shaft. Total volume of the MF seal was 44 μL. A sealing pressure of 370 mmHg was obtained at motor speeds of 0-40,000 rpm. The seal remained perfect for 10 days in saline under the condition of a pump flow of 1.5 L/min (The test was terminated in accordance with plans). The seal remained intact after ethylene oxide sterilization during which the seal was exposed to high pressures. In conclusion, the newly developed MF seal will be useful for a catheter pump. - Highlights: • A miniature magnetic fluid seal working in a liquid environment was developed. • The seal can be installed on Ø1 mm shaft and can seal against 370 mmHg at 40000 rpm. • The magnetic fluid seal will be useful for a catheter blood pump.

  4. Numerical Investigation on Windback Seals Used in Aero Engines

    Directory of Open Access Journals (Sweden)

    Michael Flouros

    2018-01-01

    Full Text Available Seals are considered one of the most important flow elements in turbomachinery applications. The most traditional and widely known seal is the labyrinth seal but in recent years other types like the brush or carbon seals were introduced since they considerably reduce the sealing air consumption. When seals are used for sealing of aero engine bearing chambers they are subjected to high “bombardment” through oil particles which are present in the bearing chamber. These particles mainly result from the bearings as a consequence of the high rotational speeds. Particularly when carbon or brush seals are used, problems with carbon formation (coking may arise when oil gets trapped in the very tight gap of these seals. In order to prevent oil migration into the turbomachinery, particularly when the pressure difference over a seal is small or even negligible, significant improvement can be achieved through the introduction of so called windback seals. This seal has a row of static helical teeth (thread and below this thread a scalloped or smooth shaft section is rotating. Depending on the application, a windback seal can be used alone or as a combination with another seal (carbon, brush or labyrinth seal. A CFD analysis carried out with ANSYS CFX version 11 is presented in this paper with the aim to investigate this seal type. The simulations were performed by assuming a two-phase flow of air and oil in the bearing compartment. Design parameters like seal clearance, thread size, scallop width, were investigated at different operating conditions.

  5. Dynamic analysis of C/C composite finger seal

    Directory of Open Access Journals (Sweden)

    Chen Guoding

    2014-06-01

    Full Text Available A seal device as an important component of aeroengines has decisive influence on performance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are made strictly. Finger seal as a novel kind of sealing device, recently attracts more and more attentions in academic circles and engineering fields at home and abroad. Research on finger seals has been extensively developed, especially on leakage and wear performances under dynamic conditions. However, it is a pity that the work on finger seals has been limited with a single approach that is improving the performance by structural optimization; in addition, the technology of dynamic analysis on finger seals is weak. Aiming at the problems mentioned above, a distributed mass equivalent dynamic model of finger seals considering the coupling effect of overlaid laminates is established in the present paper, the dynamic performance of 2.5 dimension C/C composite finger seal is analyzed with the model, and then the effects of fiber bundle density and fiber bundle preparation direction on finger seal’s dynamic performance are discussed, as well as compared with those of Co-based alloy finger seal. The current work is about dynamic analysis of finger seals and application of C/C composite in this paper may have much academic significance and many engineering values for improving research level of finger seal dynamics and exploring feasibility of C/C composite being used for finger seals.

  6. Glacial geomorphology of the northwestern Weddell Sea, eastern Antarctic Peninsula continental shelf: Shifting ice flow patterns during deglaciation

    Science.gov (United States)

    Campo, Jennifer M.; Wellner, Julia S.; Domack, Eugene; Lavoie, Caroline; Yoo, Kyu-Cheul

    2017-03-01

    During the Last Glacial Maximum, grounded ice from the expanded Antarctic Peninsula Ice Sheet extended across the continental shelf. Grounded and flowing ice created a distinctive array of glacial geomorphic features on the sea floor, which were then exposed as the ice sheet retreated. The recent disintegration of the northern parts of the Larsen Ice Shelf (Larsen A and B) have permitted acquisition of marine geophysical data in previously inaccessible and unmapped areas. We present a reconstruction of the evolving ice-flow path and ice sheet geometry of the eastern Antarctic Peninsula, with particular focus paid to newly surveyed areas that shed light on the dynamics of a marine-terminating glacial geomorphic environment, where ice shelves play a major role in grounding line stability. Shifting flow directions were mapped in several areas, including across the Seal Nunataks, which divide Larsen A and B, and offshore of Larsen C, indicating flow reorientation that reflects the changing ice sheet geometry as retreat neared the modern coastline. The measured flow indicators in this area reveal comparatively high elongation ratios (> 20), indicating rapid ice flow. Evidence of possible previous ice-shelf collapses are noted near the shelf break, further illustrating the critical, protective effect that ice shelves impart to marine-terminating glacial environments. Modern ice retreat is governed in part by reorganization of flow patterns accompanying grounding line movement; such reorganizations happened in the past and can aid understanding of modern processes.

  7. Solid state switch panel. [using hermetic sealing

    Science.gov (United States)

    Beenfeldt, E.

    1974-01-01

    An intensive study of various forms of transducers was conducted with application towards hermetically sealing the transducer pick off and all electronics. The results indicated that the Hall effect devices and a LED/phototransistor combination were the most practical for this type of application. Therefore, hardware was developed utilizing a magnet/Hall effect transducer for single action switches and LED/phototransistor transducers for rotary multiposition or potentiometer applications. A number of switches were built and models were hermetically sealed to prove the feasibility of this type of fabrication. One of each type of switch was subjected to temperature cycling, vibration, and EMI tests.

  8. Evaluation of Subterranean Subsidence at Seal Beach National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this study was to determine the amount of subsurface subsidence at Naval Weapons Station Seal Beach (NWSSB) areas which include Seal Beach National...

  9. Bismuth alloy potting seals aluminum connector in cryogenic application

    Science.gov (United States)

    Flower, J. F.; Stafford, R. L.

    1966-01-01

    Bismuth alloy potting seals feedthrough electrical connector for instrumentation within a pressurized vessel filled with cryogenic liquids. The seal combines the transformation of high-bismuth content alloys with the thermal contraction of an external aluminum tube.

  10. Salmonella and Campylobacter spp. in northern elephant seals, California

    National Research Council Canada - National Science Library

    Stoddard, Robyn A; Gulland, M D Frances; Atwill, E Rob; Lawrence, Judy; Jang, Spencer; Conrad, Patricia A

    2005-01-01

    Campylobacter and Salmonella spp. prevalence and antimicrobial drug sensitivity were determined in northern elephant seals that had not entered the water and seals that were stranded on the California coast...

  11. Forming a Turbomachinery Seals Working Group: An Overview and Discussion

    Science.gov (United States)

    Proctor, Margaret P.

    2007-01-01

    Purose: Identify technical challenges to improving turbomachinery seal leakage and wear performance, reliability and cost effectiveness. Develop a coordinated effort to resolve foundational issues for turbomachinery seal technologies. Identify and foster opportunities for collaboration. Advocate for funding.

  12. Effectiveness of crack sealing on pavement serviceability and life.

    Science.gov (United States)

    2011-06-01

    This report presents the details of a study to evaluate effectiveness of Ohio Department of Transportations prevailing crack sealing program. Evaluation was performed through field monitoring a large number of crack sealed and control sections. Fi...

  13. Bentonite as a waste isolation pilot plant shaft sealing material

    Energy Technology Data Exchange (ETDEWEB)

    Daemen, J.; Ran, Chongwei [Univ. of Nevada, Reno, NV (United States)

    1996-12-01

    Current designs of the shaft sealing system for the Waste Isolation Pilot Plant (WIPP) propose using bentonite as a primary sealing component. The shaft sealing designs anticipate that compacted bentonite sealing components can perform through the 10,000-year regulatory period and beyond. To evaluate the acceptability of bentonite as a sealing material for the WIPP, this report identifies references that deal with the properties and characteristics of bentonite that may affect its behavior in the WIPP environment. This report reviews published studies that discuss using bentonite as sealing material for nuclear waste disposal, environmental restoration, toxic and chemical waste disposal, landfill liners, and applications in the petroleum industry. This report identifies the physical and chemical properties, stability and seal construction technologies of bentonite seals in shafts, especially in a saline brine environment. This report focuses on permeability, swelling pressure, strength, stiffness, longevity, and densification properties of bentonites.

  14. HMSRP Hawaiian Monk Seal Master Identification Records (annual)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of all individually identified Hawaiian monk seals since 1981. These seals were identified by PSD personnel and cooperating scientists...

  15. Performance evaluation of seal coat materials and designs.

    Science.gov (United States)

    2011-01-01

    "This project presents an evaluation of seal coat materials and design method. The primary objectives of this research are 1) to evaluate seal coat performance : from various combinations of aggregates and emulsions in terms of aggregate loss; 2) to ...

  16. Performance oriented guidance for Mississippi chip seals - volume II.

    Science.gov (United States)

    2013-12-01

    A laboratory and field study was conducted related to long term chip seal performance. This reports primary : objective was to initiate development of a long term performance (LTP) test protocol for chip seals focused on : aggregate retention. Key...

  17. Kansas Department of Transportation 2014 chip seal manual.

    Science.gov (United States)

    2014-03-01

    A chip seal is a very effective thin surface treatment process used by maintenance managers to : preserve existing asphalt pavements. The Kansas Department of Transportation (KDOT) 2014 Chip Seal : Manual is a guide that provides guidelines, backgrou...

  18. Ecology, tourism and management of harbour seals (Phoca vitulina)

    OpenAIRE

    Granquist, Sandra M.

    2016-01-01

    In cases where human and wildlife are co-using the same geographical areas and resources, management issues often get complex and stakeholder conflicts are common. The Icelandic harbour seal (Phoca vitulina) population is rapidly decreasing, but direct culling of seals still occurs. At the same time seals are becoming an important resource due to increased interest in wildlife watching. Despite the complicated management situation, the Icelandic harbour seal population is one of the least stu...

  19. A morbillivirus causing mass mortality in seals.

    NARCIS (Netherlands)

    A.D.M.E. Osterhaus (Albert)

    1989-01-01

    textabstractDuring an outbreak of a serious apparently infectious disease among harbour seals (Phoca vitulina), which started in the Kattegat area in April 1988 and rapidly spread to the North sea, the Wadden sea and the Baltic sea, greater than 17,000 animals died within a period of eight months.

  20. Advanced Seal Sessions I and II

    Science.gov (United States)

    Steinetz, Bruce M.; Dunlap, Patrick H.; Sarawate, Neelesh

    2013-01-01

    As aircraft operators continue to seek higher fuel efficiency, lower emissions, and longer on-wing performance, turbine engine designers are scrutinizing all components for areas of improvement. To achieve overall goals, turbine pressure ratios and by-pass ratios continue to climb. Also, designers are seeking to minimize parasitic and cooling flows to extract the most useful work out of the flow stream, placing a renewed interest on seal technology and secondary flow path management. In the area of future manned spacecraft, advancements are being examined for both habitat seals and re-entry thermal protection system thermal barrierseals. For long duration space craft, designers are continuing to look for savings in parasitic losses to reduce the amount of cabin re-supply air that needs to be brought along. This is placing greater demands on seal designs and materials to exhibit low leakage and be resistant to space environments. For future missions to and from distant planets, the re-entry heating will be higher than for low-earth orbit or lunar return motivating advanced thermal barrier development. This presentation will provide an overview of the seal challenges and opportunities in these diverse areas.

  1. 18 CFR 375.103 - Official seal.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Official seal. 375.103 Section 375.103 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT... outside border of which shall consist of two concentric circles enclosing the words “Department of Energy...

  2. 7 CFR 205.311 - USDA Seal.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false USDA Seal. 205.311 Section 205.311 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling,...

  3. MICROFLUIDIC COMPONENT CAPABLE OF SELF-SEALING

    DEFF Research Database (Denmark)

    2009-01-01

    A microfluidic component (100) for building a microfluidic system is provided. The microfluidic component (100) can be mounted on a microf luidic breadboard (202) in a manner that allows it to be connected to other microfluidic components (204, 206) without the requirement of additional devices. ...... (204, 206). Applying the pressure causes the two tubes to be fluidically sealed....

  4. Differential Pressure Helps Seal Ball Valve

    Science.gov (United States)

    Mangialardi, J. K.

    1985-01-01

    Leakage suppressed despite O-ring wear. New design eliminates leakage in vacuum selector valve on Space Shuttle waste-control subsystem. Applied to improve sealing in laboratory and industrial vacuum systems and other plumbing involving switching among lines with pressure differentials of order of 1 atmosphere (0.1 MPa).

  5. Design, construction and testing of underground seals

    CSIR Research Space (South Africa)

    Cook, AP

    2000-01-01

    Full Text Available There has not been any formal research carried out in South Africa into suitable construction methods and materials for underground seals. This literature survey was done to find out how this is handled in other countries, mainly the USA...

  6. Measure Guideline: Guide to Attic Air Sealing

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J.

    2014-09-01

    The Guide to Attic Air Sealing was completed in 2010 and although not in the standard Measure Guideline format, is intended to be a Measure Guideline on Attic Air Sealing. The guide was reviewed during two industry stakeholders meetings held on December 18th, 2009 and January 15th, 2010, and modified based on the comments received. Please do not make comments on the Building America format of this document. The purpose of the Guide to Attic Air Sealing is to provide information and recommendations for the preparation work necessary prior to adding attic insulation. Even though the purpose of this guide is to save energy - health, safety and durability should not be compromised by energy efficiency. Accordingly, combustion safety and ventilation for indoor air quality are addressed first. Durability and attic ventilation then follow. Finally, to maximize energy savings, air sealing is completed prior to insulating. The guide is intended for home remodelers, builders, insulation contractors, mechanical contractors, general contractors who have previously done remodeling and homeowners as a guide to the work that needs to be done.

  7. Sealing materials for solid oxide fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, P.H.

    1999-02-01

    A major obstacle in the achievement of high electrical efficiency for planar solid oxide fuel cell stacks (SOFC) is the need for long term stable seals at the operational temperature between 850 and 1000 deg. C. In the present work the formation and properties of sealing materials for SOFC stacks that fulfil the necessary requirements were investigated. The work comprises analysis of sealing material properties independently, in simple systems as well as tests in real SOFC stacks. The analysed sealing materials were based on pure glasses or glass-ceramic composites having B{sub 2}O{sub 3}, P{sub 2}O{sub 5} or siO{sub 2} as glass formers, and the following four glass systems were investigated: MgO/caO/Cr{sub 2}O{sub 3}-Al{sub 2}O{sub 3}B{sub 2}O{sub 3}-P{sub 2}O{sub 5}, MgO-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5}, MgO-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5}-SiO{sub 2} and BaO/Na{sub 2}O-Al{sub 2}O{sub 3}-SiO{sub 2}. (au) 32 tabs., 106 ills., 107 refs.

  8. Self-lubricating fluorine shaft seal material

    Science.gov (United States)

    Munk, W. R.

    1970-01-01

    Lubricating film is produced by a reaction of fluorine with a composite of aluminum oxide and nickel powder. The rate of nickel fluoride generation is proportional to the rate at which the fluoride is rubbed off the surface, allowing the seal to operate with the lowest possible heating.

  9. Measuring Gaps In O-Ring Seals

    Science.gov (United States)

    Johnson, Scott E.

    1990-01-01

    Technique enables measurement of leakage areas created by small obstructions in O-ring seals. With simple fixture, gaps measured directly. Compresses piece of O-ring by amount determined by spacers. Camera aimed through clear plastic top plate records depression made in O-ring by obstruction. Faster, easier, more accurate than conventional estimation.

  10. Pressure Gauges Monitor Leakage Past Seals

    Science.gov (United States)

    Smith, Steven A.

    1990-01-01

    Method devised to measure leakage of gas past each of two sets of primary and secondary seals into common volume from which aggregate flow measured. Although method applicable only to specific combination of flow configuration and thermal conditions, it serves as example of more general approach involving use of statistical analysis to extract additional information from measurements.

  11. THE PROBLEMS AND PROSPECTS OF THE USE OF ELASTOMER SEALS FOR SEALING OF UNDERGROUND STRUCTURES

    Directory of Open Access Journals (Sweden)

    L. H. Politikova

    2007-10-01

    Full Text Available The research work on creation of effective rubber sealants for hermetic sealing of joints of underground structures from modular ferro-concrete and pig-iron including the underground tunnel casings is carried out.

  12. Both the Antarctic fur seal Arctocephalus gazella and the ...

    African Journals Online (AJOL)

    spamer

    population size and pup production of Antarctic fur seals at Prince Edward Island. It also updates the avail- able census figures for the Subantarctic fur seal, ..... In Status, Biology and Ecology of Fur. Seals. Croxall, J. P. and R. L. Gentry (Eds). Proceedings of an International Symposium and Workshop, Cambridge,. England ...

  13. 32 CFR 150.1 - Name and seal.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Name and seal. 150.1 Section 150.1 National... JUSTICE COURTS OF CRIMINAL APPEALS RULES OF PRACTICE AND PROCEDURE § 150.1 Name and seal. (a) The titles... Court is authorized a seal in the discretion of the Judge Advocate General concerned. The design of such...

  14. 50 CFR 216.73 - Disposition of fur seal parts.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person unless...

  15. 12 CFR 905.26 - Official logo and seal.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Official logo and seal. 905.26 Section 905.26... OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS Miscellaneous § 905.26 Official logo and seal. This... as the official seal used to certify and authenticate official documents of the Board of Directors...

  16. 50 CFR 223.201 - Guadalupe fur seal.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Guadalupe fur seal. 223.201 Section 223... Applicable to Threatened Marine and Anadromous Species § 223.201 Guadalupe fur seal. (a) Prohibitions. The... seal except as provided in paragraph (b) of this section. (b) Exceptions. (1) The Assistant...

  17. 17 CFR 2.2 - Authority to affix seal.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission are...

  18. 50 CFR 216.81 - Visits to fur seal rookeries.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage. ...

  19. 12 CFR 1700.3 - Official logo and seal.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Official logo and seal. 1700.3 Section 1700.3... DEVELOPMENT OFHEO ORGANIZATION AND FUNCTIONS ORGANIZATION AND FUNCTIONS § 1700.3 Official logo and seal. The..., and signage. The logo serves as the official seal to authenticate official documents of the Agency. (a...

  20. Behavior Of Joint Seal In Solid Rocket Booster

    Science.gov (United States)

    Moore, Carleton J.

    1988-01-01

    Report analyzes behavior of O-ring seals in case of Solid Rocket Booster. Numerical simulations of transient response of seal presented with measurements of relevant mechanical properties of O-rings to show there is range of operating conditions in which seal can fail.

  1. Vented piston seal prevents fluid leakage between two chambers

    Science.gov (United States)

    Mac Glashan, W. F.; Morrison, R.

    1964-01-01

    To prevent fluid leakage around piston seals separating two fluids under differential pressure, a venting system has been devised. Two methods may be used for venting seals through internal passages to an external low-pressure area, O-ring or split-ring seals.

  2. Experimental toxoplasma gondii infection in grey seals (Halichoerus grypus)

    DEFF Research Database (Denmark)

    Gajadhar, A. A.; Measures, L.; Forbes, L. B.

    2004-01-01

    Laboratory-reared animals were used to assess the susceptibility of seals (Halichoerus grypus) to Toxoplasma gondii infection. Four seals were each orally inoculated with 100 or 10,000 oocysts of T. gondii (VEG strain), and another 4 seals served as negative controls. Occasionally, mild behavioral...

  3. Short communications Goose barnacles on seals and a penguin at ...

    African Journals Online (AJOL)

    During a survey of seals in September and October 2009 at Gough Island, South Atlantic Ocean, we recorded goose barnacles (Lepas australis) attached to the pelage of two of the 12 elephant seals (Mirounga leonina) inspected and one of the seven vagrant Antarctic fur seals (Arctocephalus gazella) which were found ...

  4. Moult in the Mediterranean monk seal from Cap Blanc, western ...

    African Journals Online (AJOL)

    It is different to that of the Hawaiian monk seal and elephant seals, as Mediterranean monk seals partly moult in the water. The intermoult period was close to one year except in females nursing a pup. Such females have longer intermoult periods and can even moult whilst still lactating. In males, the process of developing ...

  5. population numbers of fur seals at prince edward island, southern ...

    African Journals Online (AJOL)

    During the period 17–22 December 2001, the onshore distribution and the abundance of Antarctic fur seals Arctocephalus gazella and Subantarctic fur seals A. tropicalis were determined for Prince Edward Island. Two breeding colonies of Antarctic fur seals were located on the south-east coast of the island; the first a mixed ...

  6. 14 CFR 1221.109 - Use of the NASA Seal.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Use of the NASA Seal. 1221.109 Section 1221.109 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA Program...

  7. 14 CFR 1221.102 - Establishment of the NASA Seal.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Establishment of the NASA Seal. 1221.102 Section 1221.102 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA...

  8. 2006 NASA Seal/Secondary Air System Workshop; Volume 1

    Science.gov (United States)

    Steinetz, Bruce, M. (Editor); Hendricks, Robert C. (Editor); Delgado, Irebert (Editor)

    2007-01-01

    The 2006 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (ii) Overview of NASA s new fundamental aeronautics technology project; (iii) Overview of NASA Glenn Research Center s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakages as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Several organizations presented development efforts aimed at developing faster clearance control systems and associated technology to meet future engine needs. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle. Seal technical challenges (including space environments, temperature variation, and seal-on-seal operation) as well as plans to develop the necessary "androgynous" seal technologies were reviewed. Researchers also reviewed seal technologies employed by the Apollo command module that serve as an excellent basis for seals for NASA s new Crew Exploration Vehicle (CEV).

  9. Thermal stress minimized, two component, turbine shroud seal

    Science.gov (United States)

    Handschuh, Robert F. (Inventor)

    1988-01-01

    In a turbine machine, a two-component shroud seal which maximizes insulation and sealing around the rotating turbine blades, and is made by independently fabricating each of the two components then joining them together, is disclosed. The two components may be joined together at room temperature. The resulting shroud seal provides greater engine efficiency and thrust.

  10. ITER lip seal welding and cutting developments

    Energy Technology Data Exchange (ETDEWEB)

    Levesy, B.; Cordier, J.J.; Jokinen, T. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Kujanpää, V.; Karhu, M. [VTT Technical Research Centre of Finland (Finland); Le Barbier, R. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Määttä, T. [VTT Technical Research Centre of Finland (Finland); Martins, J.P.; Utin, Y. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2015-10-15

    Highlights: • Different TIG and Laser welding techniques are tested. • Twin spot laser welding techniques is the best. • Limited heat input gives a stable weld pool in all positions. • Penetrations is achieved. • Lip seal welding and cutting with a robotic arm is successfully performed on a representative mock-up. - Abstract: The welded lip seals form part of the torus primary vacuum boundary in between the port plugs and the vacuum vessel, and are classified as Protection Important Component. In order to refurbish the port plugs or the in-vessel components, port plugs have to be removed from the machine. The lip seal design must enable up to ten opening of the vacuum vessel during the life time operation of the ITER machine. Therefore proven, remote reliable cutting and re-welding are essential, as these operations need to be performed in the port cells in a nuclear environment, where human presence will be restricted. Moreover, the combination of size of the components to be welded (∼10 m long vacuum compatible thin welds) and the congested environment close to the core of the machine constraint the type and size of tools to be used. This paper describes the lip seal cutting and welding development programme performed at the VTT Technical Research Centre, Finland. Potential cutting and welding techniques are analyzed and compared. The development of the cutting, TIG and laser welding techniques on samples are presented. Effects of lip seal misalignments and optimization of the 2 welding processes are discussed. Finally, the manufacturing and test of the two 1.2 m × 1 m representative mock-ups are presented. The set-up and use of a robotic arm for the mock-up cutting and welding operations are also described.

  11. Sealed source dismantling hot cell - startup

    Energy Technology Data Exchange (ETDEWEB)

    Dellamano, Jose Claudio; Ferreira, Robson de Jesus, E-mail: jcdellam@ipen.br, E-mail: rojefer@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Gerencia de Rejeitos radioativos

    2013-07-01

    Sealed radioactive sources are widely used in many applications of nuclear technology and at the end of the useful life, most sources become radioactive waste. In Brazil, this waste is received by the Institutes of the National Nuclear Energy Commission and kept under centralized storage. The Waste Management Department at the Nuclear and Energy Research Institute is the main storage center, having received around 20,000 disused sources. A hot cell was designed and constructed to manage Co-60 spent sealed sources with activity up to 3.7 10{sup 1}0 Bq and other sources with equivalent activities. In the hot cell the sources are withdraw from their original shielding and transferred to a standard shielding for further disposal off. The original shielding disassembling is made outside the hot cell and after opening, it is transferred inside the hot cell and the sealed source is removed remotely. The source is checked in relation to external contamination and its activity is checked. After this, the source is positioned in the standard shielding located inside an overpack at the bottom of the hot cell. This paper describes some pre-operational tests carried out in it, that include: opening and closing doors and locks, checking of all electrical and pneumatic controls, the original shielding movement inside the hot-cell, dose rate measurements outside the hot-cell, insertion of the sealed sources inside the activity meter chamber, transferring the sealed source to the standard shielding, movement of the overpack with the standard shielding to outside of the hot-cell and plugging of the standard shielding. (author)

  12. Investigation of seal technology for Francis turbine

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Wei

    2012-06-01

    Leakage loss and disk friction loss caused by the clearance gap flow at the back of a runner have a major impact on the efficiency of hydraulic turbines. Accordingly, it is extremely important to develop and improve the seal technology by investigating the gap flow. Generally, there are two types of the gap flow: axial gap flow between a rotating disk and a stator (e.g. the flow at the back of a runner) and the annular gap flow (e.g. the flow at an annular seal). Firstly, the overview of previous researches on labyrinth seal, rotating disk flow and Taylor-Couette flow are summarized. Labyrinth seals are the primary type of seals for turbo machinery. However, most researchers studied it for compressible flow only. It is also found that the enclosed rotating disk flow with through-flow can be studied instead of the gap flow in a hydraulic machine. Furthermore, the above mentioned annular gap flow is similar to the Taylor-Couette flow. The Taylor-vortices are formed in the annular gap due to the rotation of disk, which could be used as a resistance of flow. Therefore, in the present work, three parts are investigated. The first part is the investigation of the labyrinth seal for Francis turbines. The second part is the investigation of the gap flow between two stationary walls. The third part is investigation of the annular gap flow between one stationary and one rotating wall, based on the theory of Taylor-Couette flow. Afterwards, the theoretical formulas for leakage flow of a traditional labyrinth seal used in high head Francis turbine is derived and is verified to give acceptable results. The theoretical model is useful to predict the leakage flow by the measurements of Francis turbine at the Aabjoera Power plant. For straight-through labyrinth seal, the effects of cavity dimensions, numbers and locations on the leakage flow are investigated numerically. Smaller cavity depth, longer cavity length and fewer cavity numbers are required in order to reduce leakage

  13. Material Research of Rotary Sealing Device for Combined Cutting System

    OpenAIRE

    Rui Zeng; Yong Zhang; Zhenrong Lin; Lulu Wang

    2017-01-01

    In order to solve the rotary sealing problem of rotary shaft in drum shearer combined cutting system, the material and structure of combined cutting system rotary sealing device needs to be selected and designed. In the paper, the rotary sealing structure of four grades in series was designed first, and then the material of NBR-40 and PTFE 4FT-4 under the separate static and dynamic sealing tests were carried out on the combined tooth-slip-ring sealing test-bed. The tests show that the NBR-40...

  14. Low torque hydrodynamic lip geometry for rotary seals

    Science.gov (United States)

    Dietle, Lannie L.; Schroeder, John E.

    2015-07-21

    A hydrodynamically lubricating geometry for the generally circular dynamic sealing lip of rotary seals that are employed to partition a lubricant from an environment. The dynamic sealing lip is provided for establishing compressed sealing engagement with a relatively rotatable surface, and for wedging a film of lubricating fluid into the interface between the dynamic sealing lip and the relatively rotatable surface in response to relative rotation that may occur in the clockwise or the counter-clockwise direction. A wave form incorporating an elongated dimple provides the gradual convergence, efficient impingement angle, and gradual interfacial contact pressure rise that are conducive to efficient hydrodynamic wedging. Skewed elevated contact pressure zones produced by compression edge effects provide for controlled lubricant movement within the dynamic sealing interface between the seal and the relatively rotatable surface, producing enhanced lubrication and low running torque.

  15. Material Research of Rotary Sealing Device for Combined Cutting System

    Directory of Open Access Journals (Sweden)

    Rui Zeng

    2017-01-01

    Full Text Available In order to solve the rotary sealing problem of rotary shaft in drum shearer combined cutting system, the material and structure of combined cutting system rotary sealing device needs to be selected and designed. In the paper, the rotary sealing structure of four grades in series was designed first, and then the material of NBR-40 and PTFE 4FT-4 under the separate static and dynamic sealing tests were carried out on the combined tooth-slip-ring sealing test-bed. The tests show that the NBR-40 O-Ring with PTFE 4FT-4 tooth-slip-ring has no low-pressure leakage problem and low leakage in the sealing progress, the sealing effect of which is the best.

  16. Seal Technology for Hypersonic Vehicle and Propulsion: An Overview

    Science.gov (United States)

    Steinetz, Bruce M.

    2008-01-01

    Hypersonic vehicles and propulsion systems pose an extraordinary challenge for structures and materials. Airframes and engines require lightweight, high-temperature materials and structural configurations that can withstand the extreme environment of hypersonic flight. Some of the challenges posed include very high temperatures, heating of the whole vehicle, steady-state and transient localized heating from shock waves, high aerodynamic loads, high fluctuating pressure loads, potential for severe flutter, vibration, and acoustic loads and erosion. Correspondingly high temperature seals are required to meet these aggressive requirements. This presentation reviews relevant seal technology for both heritage (e.g. Space Shuttle, X-15, and X-38) vehicles and presents several seal case studies aimed at providing lessons learned for future hypersonic vehicle seal development. This presentation also reviews seal technology developed for the National Aerospace Plane propulsion systems and presents several seal case studies aimed at providing lessons learned for future hypersonic propulsion seal development.

  17. Glass-ceramic composition for hermetic seals

    Science.gov (United States)

    Ballard, Jr., Clifford P.

    1979-01-01

    The invention relates to a glass-ceramic composition having a high fracture strength adaptable for hermetically sealing to chromium bearing iron or nickel base alloys at temperatures of between about 950.degree. C to about 1100.degree. C to form a hermetically sealed insulator body, comprising from about 55 to about 65 weight percent SiO.sub.2, from about 0 to about 5 weight percent Al.sub.2 O.sub.3, from about 6 to about 11 weight % Li.sub.2 O, from about 25 to about 32 weight percent BaO, from about 0.5 to about 1.0 weight percent CoO and from about 1.5 to about 3.5 weight percent P.sub.2 O.sub.5.

  18. Manifold seal structure for fuel cell stack

    Science.gov (United States)

    Collins, William P.

    1988-01-01

    The seal between the sides of a fuel cell stack and the gas manifolds is improved by adding a mechanical interlock between the adhesive sealing strip and the abutting surface of the manifolds. The adhesive is a material which can flow to some extent when under compression, and the mechanical interlock is formed providing small openings in the portion of the manifold which abuts the adhesive strip. When the manifolds are pressed against the adhesive strips, the latter will flow into and through the manifold openings to form buttons or ribs which mechanically interlock with the manifolds. These buttons or ribs increase the bond between the manifolds and adhesive, which previously relied solely on the adhesive nature of the adhesive.

  19. Sealing Penetrating Eye Injuries With Photoactivated Bonding

    Science.gov (United States)

    2013-09-01

    Kochevar, R. W. Redmond and I. E. Kochevar (2012) Light-activated tissue bonding for excisional wound closure: a split- lesion clinical trial. Br J Dermatol...repair of Achilles tendon rupture in a rat model. J Surg Res. 2005;124:274– 279. 4. Chan BP, Kochevar IE, Redmond RW. Enhancement of porcine skin graft...preclinical studies for reattachment of peripheral nerves, blood vessel anastomosis and tendon repair. In this study, PTB was used to seal human

  20. Friction Forces in O-ring Sealing

    OpenAIRE

    Al-Ghathian; Faisal M.M. Tarawneh; S. Muafag

    2005-01-01

    In the present study the focus was on developing a relationship as practical and convenient option for computing the friction force in O-ring sealing elements as used in the hydraulic and pneumatic equipments. For low-pressure applications, the developed relationship was applied for a different number of O-ring diameters, by investigating the obtained results, a good agreement has been observed for some of the tested diameters through the comparison between the obtained re...

  1. Annular Pressure Seals and Hydrostatic Bearings

    Science.gov (United States)

    2006-11-01

    scale). The equation below presents a close form expression for estimation of the added mass coefficient (MXX) in a seal or squeeze film damper [14...Arauz & L. San Andrés, “ASME Journal of Tribology, 120, pp. 221-233, 1998. [14] Squeeze Film Dampers : Operation, Models and Technical Issues, L. San...fluid film bearing technology with very low number of parts and no DN limit operation. Details on the bulk- flow analysis of turbulent flow

  2. On the effect of topography and wind on warm water inflow—An idealized study of the southern Weddell Sea continental shelf system

    Science.gov (United States)

    Daae, K.; Hattermann, T.; Darelius, E.; Fer, I.

    2017-03-01

    An idealized eddy-resolving numerical model, with topographic features common to the southern Weddell Sea, is constructed to study mechanisms through which warm deep water enters a wide continental shelf with a trough. The open ocean, represented by a 1700 m deep channel, is connected to a 400 m deep shelf with a continental slope. The shelf is narrow (50 km) in the east but widens to 300 km at the center of the model domain. Over the narrow shelf, the slope front is balanced by wind-driven Ekman downwelling and counteracting eddy overturning, favoring on-shelf transport of warm water in summer scenarios when fresher surface water is present. Over the wide shelf, the Ekman downwelling ceases, and the mesoscale eddies relax the front. Inflow of warm water is sensitive to along-shelf salinity gradients and is most efficient when denser water over the wide shelf favors up-slope eddy transport along isopycnals of the V-shaped slope front. Inflow along the eastern side of the trough cannot penetrate the sill region due to potential vorticity constraints, while along the western trough flank, eddy-induced inflow crosses the sill and reaches the ice front. The warm inflow into the trough is sensitive to the density of the outflowing dense shelf water. For weaker winds, absence of the dense water outflow leads to a reversal of the trough circulation and a strong inflow of warm water, while for stronger winds, baroclinic effects become less important and the inflow is similar to experiments including dense water outflow.

  3. Overview of the SEAFP and SEAL Studies

    Science.gov (United States)

    Cook, I.; Raeder, J.; Gulden, W.

    1997-09-01

    The SEAFP ( Safety and Environmental Assessment of Fusion Power) and SEAL ( Safety and Environmental Assessment of fusion power, Long-term) programs form part of the ongoing effort in the European Fusion Programme to consider the safety and environmental aspects of fusion power. SEAFP was undertaken in the period 1992-1994. The assessment started with the development of two conceptual power plant designs, each of 3000 MW of fusion power, termed Model 1 and Model 2. Model 1 used vanadium alloy, helium cooling, and lithium oxide for tritium generation. Model 2 used a reduced-activation martensitic steel, water cooling, and a lithium-lead alloy for tritium generation. Both Models were designed for passive safety. The SEAFP analyses included detailed consideration of effluents, occupational doses, accidents (concentrating on the worst possible accidents), and waste management. The key results are summarized in this paper. SEAL was launched in 1995, with the aims of broadening the scope of SEAFP, and of elaborating selected aspects of SEAFP in more detail. The SEAL analyses include studies which extend the results of SEAFP to a wider class of blanket designs and material choices, improved assessments of the quantities of activated materials which may be exempted from regulatory control or recycled, improved modeling of occupational doses, and work in many areas to improve relevant data, modeling and analyses, or consider design improvements. Much of this work is ongoing, but key results from completed work are summarized in this paper.

  4. Sealing versus Nonsealing: Cost-benefit analysis

    Directory of Open Access Journals (Sweden)

    Anshula N Deshpande

    2016-01-01

    Full Text Available Dental caries still remains the second most prevalent disease after common cold, out of which occlusal caries is the most profound one. In India, more than 40% of children are found to be affected by dental caries. Occlusal surfaces of the teeth are most susceptible sites for caries development due to their morphology. They are least benefited from fluoride application. Various efforts have been made by the preventive means to decline the rate of caries, one of which being sealant application. Sealants have come into existence long back since 1971 when first pit and fissure sealant Nuva-Caulk came into existence. There have been piles of literature stating the benefits that arrive from sealing the teeth. However, one crucial point that is being missed most of the times is the cost-effectiveness of the sealant. There are various schools of thoughts, regarding this that is controversial ones. Some of the analysts believe that always sealing may be a bit costlier, but it reduces subsequent dental treatments and hence saves money as well as time. However, some believe that why to unnecessarily seal the teeth in all cases even when the child is not at a risk to develop caries. Hence, we need to foresee both the sides of equation. For best clinical practice and decision-making, we need to have a balance of best evidence, clinical judgment, and the most important, patient needs and preferences.

  5. Viscoelastic analysis of seals for extended service life

    Science.gov (United States)

    Bower, Mark V.

    1993-01-01

    The space station is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program (2) has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools which in turn, are to be used to qualify the flight hardware. Seals are simple devices, in wide spread use. The most common type of seal is the O-ring. O-ring seals are typically rings of rubber with a circular cross section. The rings are placed between the surfaces to be sealed, usually in a groove of some design. The particular design may differ based on a number of different factors. This research is focused on O-rings that are staticly compressed by perpendicular clamping forces, commonly referred to as face seals. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  6. Predicting recurrent PDV epizootics in European harbour seals (Phoca vitulina

    Directory of Open Access Journals (Sweden)

    Tero Härkönen

    2010-09-01

    Full Text Available Phocine Distemper Virus (PDV caused mass mortality in European harbour seals (Phoca vitulina in 1988 and in 2002. Both epizootics likely originated from refugia in Arctic seals, where data indicate PDV hops among populations and species. The metapopulation structure of host populations is suggested to be the reason why PDV is preserved among Arctic seals, since the high rate of spread of PDV would require much larger panmictic populations to maintain an infection. The pattern of sudden outbreaks of PDVis also seen in grey seals (Halichoerus grypus, the only to date identified species that could act as a vector between Arctic and North Sea seal populations. Harbour seal populations along mainland Europe were below critical herd immunity levels by 3-5 years after the events, and thus vulnerable for new outbreaks, but historical data and the 14 years between the 2 epizootics suggest that harbour seals in the North Sea area are only rarely exposed to the infective agent. The risk for new outbreaks of the seal plague in North Sea harbour seals is likely linked to the dynamics of the disease in Arctic seal species as well asvector species.

  7. Viscoelastic analysis of seals for extended service life

    Science.gov (United States)

    Bower, Mark V.

    1993-11-01

    The space station is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program (2) has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools which in turn, are to be used to qualify the flight hardware. Seals are simple devices, in wide spread use. The most common type of seal is the O-ring. O-ring seals are typically rings of rubber with a circular cross section. The rings are placed between the surfaces to be sealed, usually in a groove of some design. The particular design may differ based on a number of different factors. This research is focused on O-rings that are staticly compressed by perpendicular clamping forces, commonly referred to as face seals. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  8. 2008 NASA Seal/Secondary Air System Workshop

    Science.gov (United States)

    Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor); Delgado, Irebert R. (Editor)

    2009-01-01

    The 2008 NASA Seal/Secondary Air System Workshop covered the following topics: (i) Overview of NASA s new Orion project aimed at developing a new spacecraft that will fare astronauts to the International Space Station, the Moon, Mars, and beyond; (ii) Overview of NASA s fundamental aeronautics technology project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakage as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Turbine seal development topics covered include a method for fast-acting HPT blade tip clearance control, noncontacting low-leakage seals, intershaft seals, and a review of engine seal performance requirements for current and future Army engine platforms.

  9. 2007 NASA Seal/Secondary Air System Workshop. Volume 1

    Science.gov (United States)

    Steinetz, Bruce M.; Hendricks, Robert C.; Delgado, Irebert

    2008-01-01

    The 2007 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA's new Orion project aimed at developing a new spacecraft that will fare astronauts to the International Space Station, the Moon, Mars, and beyond; (ii) Overview of NASA's fundamental aeronautics technology project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA's turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakage as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Turbine seal development topics covered include a method for fast-acting HPT blade tip clearance control, noncontacting low-leakage seals, intershaft seals, and a review of engine seal performance requirements for current and future Army engine platforms.

  10. 2005 NASA Seal/Secondary Air System Workshop, Volume 1

    Science.gov (United States)

    Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

    2006-01-01

    The 2005 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (ii) Overview of the NASA-sponsored Propulsion 21 Project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Several organizations presented development efforts aimed at developing faster clearance control systems and associated technology to meet future engine needs. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle. Seal technical challenges (including space environments, temperature variation, and seal-on-seal operation) as well as plans to develop the necessary "androgynous" seal technologies were reviewed. Researchers also reviewed tests completed for the shuttle main landing gear door seals.

  11. Miniature magnetic fluid seal working in liquid environments

    Science.gov (United States)

    Mitamura, Yoshinori; Durst, Christopher A.

    2017-06-01

    This study was carried out to develop a miniature magnetic fluid (MF) seal working in a liquid environment. The miniature MF seal is intended for use in a catheter blood pump. The requirements for the MF seal included a size of less than Ø4×4.5 mm, shaft diameter of 1 mm, sealing pressure of 200 mmHg, shaft speed of up to 40000 rpm, and life of one month. The miniature MF seal was composed of an NdFeB magnet (Ø4×Ø2×1) sandwiched between two pole pieces (Ø4×Ø1.1×0.5). A shield (Ø4×Ø1.2×1.5) was placed on the pole piece facing the liquid to minimize the influence of pump flow on the MF. The seal was installed on a Ø1 shaft. A seal was formed by injecting MF (Ms: 47.8 kA/m and η: 0.5 Pa·sec) into the gap between the pole pieces and the shaft. Total volume of the MF seal was 44 μL. A sealing pressure of 370 mmHg was obtained at motor speeds of 0-40,000 rpm. The seal remained perfect for 10 days in saline under the condition of a pump flow of 1.5 L/min (The test was terminated in accordance with plans). The seal remained intact after ethylene oxide sterilization during which the seal was exposed to high pressures. In conclusion, the newly developed MF seal will be useful for a catheter pump.

  12. Feasibility Assessment of Thermal Barrier Seals for Extreme Transient Temperatures

    Science.gov (United States)

    Steinetz, Bruce M.; Dunlap, Patrick H., Jr.

    1998-01-01

    The assembly joints of modem solid rocket motor cases are generally sealed using conventional O-ring type seals. The 5500+ F combustion gases produced by rocket motors are kept a safe distance away from the seals by thick layers of phenolic insulation. Special compounds are used to fill insulation gaps leading up to the seals to prevent a direct flowpath to them. Design criteria require that the seals should not experience torching or charring during operation, or their sealing ability would be compromised. On limited occasions, NASA has observed charring of the primary O-rings of the Space Shuttle solid rocket nozzle assembly joints due to parasitic leakage paths opening up in the gap-fill compounds during rocket operation. NASA is investigating different approaches for preventing torching or charring of the primary O-rings. One approach is to implement a braided rope seal upstream of the primary O-ring to serve as a thermal barrier that prevents the hot gases from impinging on the O-ring seals. This paper presents flow, resiliency, and thermal resistance for several types of NASA rope seals braided out of carbon fibers. Burn tests were performed to determine the time to burn through each of the seals when exposed to the flame of an oxyacetylene torch (5500 F), representative of the 5500 F solid rocket motor combustion temperatures. Rope seals braided out of carbon fibers endured the flame for over six minutes, three times longer than solid rocket motor burn time. Room and high temperature flow tests are presented for the carbon seals for different amounts of linear compression. Room temperature compression tests were performed to assess seal resiliency and unit preloads as a function of compression. The thermal barrier seal was tested in a subscale "char" motor test in which the seal sealed an intentional defect in the gap insulation. Temperature measurements indicated that the seal blocked 2500 F combustion gases on the upstream side with very little temperature

  13. Hermetic Seal Designs for Sample Return Sample Tubes

    Science.gov (United States)

    Younse, Paulo J.

    2013-01-01

    Prototypes have been developed of potential hermetic sample sealing techniques for encapsulating samples in a ˜1-cm-diameter thin-walled sample tube that are compatible with IMSAH (Integrated Mars Sample Acquisition and Handling) architecture. Techniques include a heat-activated, finned, shape memory alloy plug; a contracting shape memory alloy activated cap; an expanding shape memory alloy plug; and an expanding torque plug. Initial helium leak testing of the shape memory alloy cap and finned shape memory alloy plug seals showed hermetic- seal capability compared against an industry standard of seal integrity after Martian diurnal cycles. Developmental testing is currently being done on the expanding torque plug, and expanding shape memory alloy plug seal designs. The finned shape memory alloy (SMA) plug currently shows hermetic sealing capability based on preliminary tests.

  14. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States); Berger, D. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States); Harrington, C. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2015-03-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis. CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing.

  15. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology.

  16. Pressure actuated film riding seals for turbo machinery

    Science.gov (United States)

    Bidkar, Rahul Anil; Thatte, Azam Mihir; Gibson, Nathan Evan McCurdy; Giametta, Andrew Paul

    2015-08-25

    A seal assembly for a rotary machine is provided. The seal assembly includes multiple sealing device segments disposed circumferentially intermediate to a stationary housing and a rotor. Each of the sealing device segments includes a stator interface element, a shoe plate having an extended portion having one or more labyrinth teeth facing the rotor and a load bearing portion, wherein the shoe plate is configured to generate an aerodynamic force between the shoe plate and the rotor. The sealing device segment further includes a secondary seal configured to be in contact with the stator interface element at a radially outer end and configured to be in contact with an elevated nose section of the extended portion of the shoe plate on a radially inner end; and multiple flexible elements attached to the shoe plate and to the stator interface element.

  17. Could seals prevent cod recovery in the Baltic Sea?

    DEFF Research Database (Denmark)

    MacKenzie, Brian; Eero, Margit; Ojaveer, Henn

    2011-01-01

    in an ecosystem that likely will change due to both the already started recovery of a cod predator, the grey seal Halichoerus grypus, and projected climate impacts. Simulation modelling, assuming increased seal predation, fishing levels consistent with management plan targets and stable salinity, shows...... that the cod population could reach high levels well above the long-term average. Scenarios with similar seal and fishing levels but with 15% lower salinity suggest that the Baltic will still be able to support a cod population which can sustain a fishery, but biomass and yields will be lower. At present...... knowledge of cod and seal interactions, seal predation was found to have much lower impact on cod recovery, compared to the effects of exploitation and salinity. These results suggest that dual management objectives (recovery of both seal and cod populations) are realistic but success in achieving...

  18. Present knowledge of grey seals (Halichoerus grypus in Faroese waters

    Directory of Open Access Journals (Sweden)

    Bjarni Mikkelsen

    2007-01-01

    Full Text Available The grey seal (Halichoerus grypus is the only pinniped species breeding in the Faroe Islands. They are present all year round, and can be observed throughout the archipelago, but prefer to reside in exposed coastal areas, away from human settlements. Grey seals breed primarily in caves, common along the Faroese coastline. Systematic scientific investigations have not been conducted on grey seals in the Faroes. Present population level is presumably around 1,000 to 2,000 animals. These seals have probably been hunted since the Norse settlement in the 8th century. Apparently, this removal has prevented the population from increasing above a certain threshold. Tagging studies have demonstrated a connection with seals from UK waters,but the magnitude and influence of this movement is not known. Present biological knowledge is very limited and insufficient; this is due largely to the inaccessible nature of these seals.

  19. Integral edge seals for phosphoric acid fuel cells

    Science.gov (United States)

    Granata, Jr., Samuel J. (Inventor); Woodle, Boyd M. (Inventor); Dunyak, Thomas J. (Inventor)

    1992-01-01

    A phosphoric acid fuel cell having integral edge seals formed by an elastomer permeating an outer peripheral band contiguous with the outer peripheral edges of the cathode and anode assemblies and the matrix to form an integral edge seal which is reliable, easy to manufacture and has creep characteristics similar to the anode, cathode and matrix assemblies inboard of the seals to assure good electrical contact throughout the life of the fuel cell.

  20. Forming a Turbomachinery Seals Working Group - An Overview and Discussion

    Science.gov (United States)

    Proctor, Margaret P.

    2007-01-01

    A proposal to form a Turbomachinery Seals Working Group is discussed. Survey responses regarding the purpose, membership, and meeting frequency are presented as well as the areas of expertise and experience of the respondents. The types of seals used, designed, or sold, current work, and technical challenges of turbomachinery seals, their materials, analysis, geometry, manufacturing, maintenance, testing, and incorporation into engine systems are also presented.

  1. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sean [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Berger, David [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Harrington, Curtis [Univ. of California, Davis, CA (United States)

    2015-03-01

    The U.S. Department of Energy Building America Team, Consortium for Advanced Residential Buildings, sought to demonstrate this new technology application in a new construction multifamily building in Queens, New York. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before-and-after sealing, point-source testing of individual leaks, and pressure measurements in the walls of an apartment during sealing.

  2. Influence analysis of secondary O-ring seals in dynamic behavior of spiral groove gas face seals

    Science.gov (United States)

    Hu, Songtao; Huang, Weifeng; Liu, Xiangfeng; Wang, Yuming

    2016-05-01

    The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior (steady-state performance and transient performance) of face seals. A numerical finite element method (FEM) model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.

  3. An ideal sealed source life-cycle

    Energy Technology Data Exchange (ETDEWEB)

    Tompkins, Joseph Andrew [Los Alamos National Laboratory

    2009-01-01

    In the last 40 years, barriers to compliant and timely disposition of radioactive sealed sources have become apparent. The story starts with the explosive growth of nuclear gauging technologies in the 1960s. Dozens of companies in the US manufactured sources and many more created nuclear solutions to industrial gauging problems. Today they do not yet know how many Cat 1, 2, or 3 sources there are in the US. There are, at minimum, tens of thousands of sources, perhaps hundreds of thousands of sources. Affordable transportation solutions to consolidate all of these sources and disposition pathways for these sources do not exist. The root problem seems to be a lack of necessary regulatory framework that has allowed all of these problems to accumulate with no national plan for solving the problem. In the 1960s, Pu-238 displaced Pu-239 for most neutron and alpha source applications. In the 1970s, the availability of inexpensive Am-241 resulted in a proliferation of low energy gamma sources used in nuclear gauging, well logging, pacemakers, and X-ray fluorescence applications for example. In the 1980s, rapid expansion of worldwide petroleum exploration resulted in the expansion of Am-241 sources into international locations. Improvements of technology and regulation resulted in a change in isotopic distribution as Am-241 made Pu-239 and Pu-238 obsolete. Many early nuclear gauge technologies have been made obsolete as they were replaced by non-nuclear technoogies. With uncertainties in source end of life disposition and increased requirements for sealed source security, nuclear gauging technology is the last choice for modern process engineering gauging solutions. Over the same period, much was learned about licensing LLW disposition facilities as evident by the closure of early disposition facilities like Maxey Flats. The current difficulties in sealed source disposition start with adoption of the NLLW policy act of 1985, which created the state LLW compact system they

  4. Ceramic-glass-metal seal by microwave heating

    Science.gov (United States)

    Meek, Thomas T.; Blake, Rodger D.

    1985-01-01

    A method for producing a ceramic-glass-metal seal by microwaving mixes a slurry of glass sealing material and coupling agent and applies same to ceramic and metal workpieces. The slurry and workpieces are then insulated and microwaved at a power, time and frequency sufficient to cause a liquid phase reaction in the slurry. The reaction of the glass sealing material forms a chemically different seal than that which would be formed by conventional heating because it is formed by diffusion rather than by wetting of the reactants.

  5. Split ring floating air riding seal for a turbine

    Science.gov (United States)

    Mills, Jacob A

    2015-11-03

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, and a central passage connecting the annular cavity to the annular piston chamber to supply compressed air to the seal face, where the annular piston assembly is a split piston assembly to maintain a tight seal as coning of the rotor disk occurs.

  6. Soft Wire Seals For High Temperatures And Pressures

    Science.gov (United States)

    Tsou, Peter

    1996-01-01

    Soft metal wires used to make O-ring and similar seals for vessels, flanges, and fittings subject to pressures equal to or greater than 1,000 psi and temperatures equal to or greater than 100 degrees C. Seals containing soft metal wires made inexpensively because fabricated to looser tolerances like those of lower-temperature, lower-pressure elastomeric-O-ring seals, which they resemble. Seals also made with noncircular grooves and with soft metals other than aluminum. For example, gold performs well, though expensive. For other applications, silver good choice.

  7. Histological evaluation and optimization of surgical vessel sealing systems

    Science.gov (United States)

    Lathrop, Robert; Ryan, Thomas; Gaspredes, Jonathan; Woloszko, Jean; Coad, James E.

    2017-02-01

    Surgical vessel sealing systems are widely used to achieve hemostasis and dissection in open surgery and minimally invasive, laparoscopic surgery. This enabling technology was developed about 17 years ago and continues to evolve with new devices and systems achieving improved outcomes. Histopathological assessment of thermally sealed tissues is a valuable tool for refining and comparing performance among surgical vessel sealing systems. Early work in this field typically assessed seal time, burst rate, and failure rate (in-situ). Later work compared histological staining methods with birefringence to assess the extent of thermal damage to tissues adjacent to the device. Understanding the microscopic architecture of a sealed vessel is crucial to optimizing the performance of power delivery algorithms and device design parameters. Manufacturers rely on these techniques to develop new products. A system for histopathological evaluation of vessels and sealing performance was established, to enable the direct assessment of a treatment's tissue effects. The parameters included the commonly used seal time, pressure burst rate and failure rate, as well as extensions of the assessment to include its likelihood to form steam vacuoles, adjacent thermal effect near the device, and extent of thermally affected tissue extruded back into the vessel lumen. This comprehensive assessment method provides an improved means of assessing the quality of a sealed vessel and understanding the exact mechanisms which create an optimally sealed vessel.

  8. Sealing type effect on corn silage quality in bunker silos

    Directory of Open Access Journals (Sweden)

    Mikael Neumann

    Full Text Available ABSTRACT: Forage conservation in silos depends on the efficiency of silo sealing, among other factors, to minimize aerobic deterioration and consequent qualitative and quantitative losses in silage. Thus, the aim of the present study was to evaluate the effect of two sealing types on dry matter recovery rate, aerobic stability, nutritional composition, and in vitro digestibility of corn silage in bunker silos: 110-µm-thick double-sided polyethylene sealing (conventional sealing and110-µm-thick double-sided polyethylene sealing superimposed on 111-µm-thick translucent polyethylene sealing (double sealing. There were no significant differences in nutritional composition of silages between conventional and double sealing. However, the double sealing system was more efficient (P<0.05 in maintaining lower silo temperatures (30.48°C vs. 31.18°C, in dry matter recovery (88.79% vs. 85.64%, and increased in vitro neutral-detergent fiber digestibility (33.04% vs. 24.6%, when compared to the conventional version.

  9. A Numerical Analysis Method of Hydraulic Seals for Downhole Equipments

    National Research Council Canada - National Science Library

    Xin, Li; Gaoliang, Peng; Qiang, Wang; Yuhui, Liu

    2013-01-01

    .... To simulate the wear process of sealing contact surface, a methodology is built with the iterative wear prediction procedure in which the geometry of the contact interfaceprogressively changes...

  10. Numerical modeling of gland seal erosion in a geothermal turbine

    Energy Technology Data Exchange (ETDEWEB)

    Mazur, Zdzislaw; Palacios, Luis M.; Urquiza, Gustavo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2004-10-01

    Excessive erosion of the low-pressure rotor end gland seal of a 25 MWe geothermal turbine produced a partial loss of turbine vacuum that degraded cycle efficiency. This study used computational fluid dynamics (CFD) to identify the causes of erosion and the optimal steam seal system flow conditions for reducing the erosion problem. The predictions were based upon a numerical calculation using a commercial CFD code (Adapco Star-CD) to model the rotor end gland seal with a steam flow containing hard solid particles. The results confirmed that flow conditions play a major role in rotor gland seal erosion. By changing steam seal flow pressures to vary flow, it was confirmed that there is a threshold seal flow condition below which erosion does not occur, or is minimized. Optimizing the rotor end gland seal supply pressure and intercondenser pressure reduced the turbulent flow kinetic energy by 49%, with a corresponding decrease in the erosion rate of the rotor gland seal surface. The erosion rate is related directly to the particle velocity and turbulent flow kinetic energy. Recommendations are provided for adjusting the rotor end gland seal system to avoid erosion. (Author)

  11. Reducing Seal Adhesion in Low Impact Docking Systems

    Science.gov (United States)

    Banks, Bruce A.; Miller, Sharon K.

    2010-01-01

    Silicone elastomers, used in seals for airlocks or other sealing surfaces in space, are sticky in their as-received condition. Because of the sticking, a greater force may be needed to separate the mating surfaces. If the adhesion is sufficiently high, a sudden unpredicted movement of the spacecraft during undocking, vibration, or uneven release could pull off the seal, resulting in a damage that would have to be repaired before another docking. The damaged seal can result in significant gas leakage and possibly in a catastrophic mishap impacting the safety of the crew. It is also possible that a compromised seal could result in a delayed but sudden gas leak that could put the crew at unexpected risk. This is especially of concern for androgynous seals, which have identical mating surfaces on both sides for interchangeability and redundancy. Such seals typically have elastomer-on-elastomer sealing surfaces. To reduce sticking, one could use release agents such as powders and lubricants, but these can be easily removed and transferred to other surfaces, causing uneven sealing and contamination. Modification of the elastomer surface to make a more slippery and less sticky surface that is integral with the bulk elastomer would be more desirable.

  12. Use of VUV Radiation to Control Elastomer Seal Adhesion

    Science.gov (United States)

    deGroh, Henry C., III; Puleo, Bernadette J.; Waters, Deborah L.

    2013-01-01

    Due to their wide operating temperatures and low leakage rates, silicone elastomers are the only class of flight qualified elastomer materials that currently meet NASA's needs for various seal applications, which include docking and hatch seals for future space exploration vehicles. However, silicone elastomers are naturally sticky and exhibit sizeable adhesion when mated against metals and other silicone surfaces. This undesirable adhesion can make undocking spacecraft or opening a hatch problematic. Two approaches that can be used to reduce seal adhesion include use of grease or, application of low doses of atomic oxygen (AO). This paper investigates a third approach: the application of light doses of vacuum ultraviolet (VUV) radiation. Presented are the adhesion and leakage characteristics of S0383-70 silicone elastomer exposed to various VUV doses in the 115 to 200 nm wavelength range. The data indicate that adhesion is expected to be less than the target threshold maximum of 2 lb/in(exp2) after about 1 J/cm(exp2) of VUV exposure for seal-to-metal configurations and after 2 J/cm(exp2) for seal-to-seal configurations with no significant damage, or increase in seal leakage. This paper shows that VUV, without AO or grease, can be an effective means to reduce adhesion to the desired levels necessary for space seals with minimal change in seal leak rates.

  13. Spatially Estimating Disturbance of Harbor Seals (Phoca vitulina.

    Directory of Open Access Journals (Sweden)

    John K Jansen

    Full Text Available Tidewater glacial fjords in Alaska provide habitat for some of the largest aggregations of harbor seals (Phoca vitulina, with calved ice serving as platforms for birthing and nursing pups, molting, and resting. These fjords have also been popular destinations for tour ships for more than a century, with dramatic increases in vessel traffic since the 1980s. Seals on ice are known to flush into the water when approached by tour ships, but estimating the exposure to disturbance across populations is difficult. Using aerial transect sampling while simultaneously tracking vessel movements, we estimated the spatial overlap between seals on ice and cruise ships in Disenchantment Bay, Alaska, USA. By integrating previously estimated rates of disturbance as a function of distance with an 'intensity surface' modeled spatially from seal locations in the surveys, we calculated probabilities of seals flushing during three separate ship visits. By combining our estimate of seals flushed with a modeled estimate of the total fjord population, we predict that up to 14% of the seals (up to 11% of pups hauled out would have flushed into the water, depending on the route taken by ships relative to seal aggregations. Such high potential for broad-scale disturbance by single vessels (when up to 4 ships visit per day was unexpected and underscores the need to 1 better understand long-term effects of disturbance; 2 regularly monitor populations exposed to high vessel traffic; and 3 develop conservation measures to reduce seal-ship overlap.

  14. 36 CFR 1200.2 - How is each NARA seal designed?

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How is each NARA seal... ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? § 1200.2 How is each NARA seal designed? NARA's three official seals are illustrated in Figures 1, 2, and 30. A...

  15. 76 FR 55332 - Federal Bureau of Investigation Anti-Piracy Warning Seal Program

    Science.gov (United States)

    2011-09-07

    ... Part 128-1 RIN 1110-AA32 Federal Bureau of Investigation Anti-Piracy Warning Seal Program AGENCY...- Piracy Warning Seal (APW Seal). The proposed rule will provide access to the APW Seal to all copyright... on the day the comment period closes. Discussion. The FBI's Anti-Piracy Warning (APW) Seal is a...

  16. Observations on food remains in faeces of elephant, leopard and crabeater seals

    OpenAIRE

    Green, K.; Williams, R.

    1986-01-01

    Faecal material of leopard, crabeater and elephant seals was collected from the vicinity of Davis station, Antarctica. Very few identifiable remains were found in elephant seal droppings. Fish remains, mainly of Pleuragramma antarcticum, were found in both leopard and crabeater seal droppings. The mysid Antarctomysis maxima was also found in crabeater seal droppings and amphipods and decapod crustaceans in leopard seal droppings.

  17. Measure Guideline: Guide to Attic Air Sealing

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, Joseph [Building Science Corporation, Westford, MA (United States)

    2014-09-01

    The purpose of this measure guideline is to provide information and recommendations for the preparation work necessary prior to adding attic insulation. Even though the purpose of this guide is to save energy, health, safety, and durability should not be compromised by energy efficiency. Accordingly, combustion safety and ventilation for indoor air quality are addressed first. Durability and attic ventilation then follow. Finally, to maximize energy savings, air sealing is completed prior to insulating. The guide is intended for home remodelers, builders, insulation contractors, mechanical contractors, general contractors who have previously done remodeling and homeowners as a guide to the work that needs to be done.

  18. Sealed Plant-Growth Chamber For Clinostat

    Science.gov (United States)

    Brown, Christopher S.; Dreschel, Thomas W.

    1993-01-01

    Laboratory chamber for growing plants used to measure photosynthesis and respiration in simulated microgravity. Holds plant specimens while rotated on clinostat, see article, "Clinostat Delivers Power To Plant-Growth Cabinets" (KSC-11537). Provides way of comparing gas-exchange rates of plants rotated horizontally on clinostat with those of stationary or vertically rotated plants. Gas extracted for analysis without stopping clinostat. Chamber includes potlike base and cylindrical cover, both made of transparent acrylic pipe. Gasket forms seal between cover and bottom plate of base. Cover bolted to pot baseplate, which in turn bolted to clinostat.

  19. Truss up, top out, seal off [decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, D.

    1995-09-07

    This article reports on the decommissioning of the United Kingdom`s first Magnox power station at Berkeley, in Gloucestershire. The aim of the work in progress at present is to seal off the buildings, leaving the structure maintenance free for thirty years to allow levels of radioactivity inside to fall. To reduce the visual impact of the station the top quarter of each building is also being removed. The three phases of the current scheme are described, as are the strategies in place for ensuring that construction workers are not exposed to radiation. Lessons learnt here will be applied to the decommissioning of Trawsfynydd power station. (UK).

  20. Remote video registration of seals at Rødsand seal sanctuary

    DEFF Research Database (Denmark)

    Edren, Susi M.C.; Teilmann, J.; Dietz, R.

    This report describes the preliminary use of a remote-controlled webbased camera system in the Rødsand seal sanctuary. The camera system powered by solar and wind energy is designed to operate under extreme weather conditions. Live images and still photos are transmitted to a land station, from...

  1. Testing of isolation barrier sealing surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Graves, C.E.

    1994-12-15

    Isolation barrier doors are to be installed in the 105KE and 105KW basins as part of the 1994 unreviewed safety question (USQ) resolution plan to isolate the fuel storage basin from the fuel discharge chute. Included in this installation is the placement of new sealing surfaces for the barriers by affixing stainless steel plates to existing carbon steel angle bars with a specially formulated epoxy adhesive/sealant material. The sealant is a two-part component consisting of an epoxy resin (the condensation product of bisphenol A and epichlorohydrin) and a curing agent (a proprietary cycloaliphatic polyamine). The sealant is solvent free (complying with air pollution regulations) and capable of withstanding the surrounding radiation fields over an estimated 15-year service life. The epoxy sealant experiences negligible water damage partly because of its hydrophobic (water-repelling) nature. With bond tensile strengths measured at greater than 862 kPa (125 lbf/in{sup 2}), the epoxy sealant is judged acceptable for its intended application. The four-hour pot life of the epoxy sealant provides sufficient time to apply the epoxy, examine the epoxy bead for continuity, and position the stainless steel sealing plates.

  2. Evaluation of Polymer Hermetically Sealed Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2014-01-01

    Polymer cathode tantalum capacitors have lower ESR (equivalent series resistance) compared to other types of tantalum capacitors and for this reason have gained popularity in the electronics design community. Their use allows improved performance of power supply systems along with substantial reduction of size and weight of the components used. However, these parts have poor thermal stability and can degrade in humid environments. Polymer hermetically sealed (PHS) capacitors avoid problems related to environmental degradation of molded case parts and can potentially replace current wet and solid hermetically sealed capacitors. In this work, PHS capacitors manufactured per DLA LAM DWG#13030 are evaluated for space applications. Several lots of capacitors manufactured over period from 2010 to 2014 were tested for the consistency of performance, electrical and thermal characteristics, highly accelerated life testing, and robustness under reverse bias and random vibration conditions. Special attention was given to analysis of leakage currents and the effect of long-term high temperature storage on capacitors in as is condition and after hermeticity loss. The results show that PHS capacitors might be especially effective for low-temperature applications or for system requiring a cold start-up. Additional screening and qualification testing have been recommended to assure the necessary quality of capacitors for space projects.

  3. Sealed joint structure for electrochemical device

    Science.gov (United States)

    Tucker, Michael C; Jacobson, Craig P; De Jonghe, Lutgard C; Visco, Steven J

    2013-05-21

    Several members make up a joint in a high-temperature electrochemical device, wherein the various members perform different functions. The joint is useful for joining multiple cells (generally tubular modules) of an electrochemical device to produce a multi-cell segment-in-series stack for a solid oxide fuel cell, for instance. The joint includes sections that bond the joining members to each other; one or more seal sections that provide gas-tightness, and sections providing electrical connection and/or electrical insulation between the various joining members. A suitable joint configuration for an electrochemical device has a metal joint housing, a first porous electrode, a second porous electrode, separated from the first porous electrode by a solid electrolyte, and an insulating member disposed between the metal joint housing and the electrolyte and second electrode. One or more brazes structurally and electrically connects the first electrode to the metal joint housing and forms a gas tight seal between the first electrode and the second electrode.

  4. A survey of actuator shaft sealing techniques for extended space missions

    Science.gov (United States)

    Hotz, G. M.

    1972-01-01

    Actuators for control and articulation aboard Mariner spacecraft have employed output shaft seals to maintain an internal gaseous atmosphere. On future missions, considerably greater expected lifetimes, temperature ranges, and radiation exposures have led to a need to determine the limitations of the present O-ring output shaft seal and to examine other candidate seals. Seals suited both to dynamic and static sealing were examined for potential use in three specific actuator applications and the following candidate seals were selected: (a) O-ring seal, (b) chevron seal, (c) bellows seal (linear actuator only), (d) magnetic fluid seal (rotary actuators only) and as a backup seal to any of the foregoing, (e) the labyrinth seal.

  5. 46 CFR 59.10-30 - Seal welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal welding. Where leaks occur in riveted joints or connections, they shall be carefully investigated to...

  6. An outbreak of leptospirosis in seals (Phoca vitulina) in captivity

    NARCIS (Netherlands)

    Kik, M. J. L.; Goris, M. G.; Bos, J. H.; Hartskeerl, R. A.; Dorrestein, G. M.

    2006-01-01

    An outbreak of leptospirosis in seals (Phoca vitulina) in captivity is described. In a zoo in The Netherlands 5 adult seals died within 12 days. At necropsy all animals showed signs of acute septicaemia, consistent with acute leptospirosis. Serological examination of one animal was positive for

  7. POPULATION NUMBERS OF FUR SEALS AT PRINCE EDWARD ...

    African Journals Online (AJOL)

    At a mean intrinsic rate of natural increase of 16.2% per year, Antarctic fur seals appear to be in the rapid recolonization phase of population growth. Breeding colonies of Subantarctic fur seals, largely found on the entire east coast, produced an estimated 15 000 pups, and the population had maintained a mean intrinsic ...

  8. Sealing occlusal caries lesions in adults referred for restorative treatment

    DEFF Research Database (Denmark)

    Bakhshandeh, Azam; Qvist, Vibeke; Ekstrand, Kim R

    2012-01-01

    treatment by senior lecturers at School of Dentistry, Copenhagen, Denmark were included. In case the patient had more than one occlusal caries lesion, randomization between sealing and restoration was made; otherwise, the lesion was sealed. In total, 60 resin sealants and 12 composite restorations were made...

  9. Plastic ingestion by harbour seal (Phoca vitulina) in the Netherlands

    NARCIS (Netherlands)

    Bravo Rebolledo, E.; Franeker, van J.A.; Jansen, O.E.; Brasseur, S.M.J.M.

    2013-01-01

    Abundance of ingested debris by seals has been mentioned as a potential indicator of marine litter in the European Marine Strategy Framework Directive (MSFD). A sample of 107 stomachs, 100 intestines and 125 scats of harbour seals from the Netherlands was analysed for the presence of plastics.

  10. Modelling the spread of phocine distemper virus among harbour seals

    NARCIS (Netherlands)

    Koeijer, de A.; Diekman, O.; Reijnders, P.J.H.

    1998-01-01

    Data presented in earlier publications on the 1988 epizootic among seals in North West Europe show a pattern that is somewhat inconsistent with the predictions of the standard mathematical model of epidemics. We argue that for animals living in herds or colonies, such as seals, the mutual contact

  11. Modelling prey consumption and switching by UK grey seals

    DEFF Research Database (Denmark)

    Smout, Sophie; Rindorf, Anna; Hammond, Philip S.

    2014-01-01

    Grey seals (Halichoerus grypus) are adaptable generalist predatorswhose diet includes commercial fish species such as cod. Consumption by the seals may reduce the size of some fish stocks or have an adverse effect on stock recovery programmes, especially because predation may trap sparse prey pop...

  12. Cephalopod diet of the Cape fur seal, Arctocephalus pusillus ...

    African Journals Online (AJOL)

    Scats of the Cape fur seal, Arctocephalus pusillus pusillus, were sampled at four mainland colonies, Cape Cross, Atlas Bay,Wolf Bay and Van Reenen Bay, along the Namibian coast over a period of eight years (1994–2001) to assess the diversity and spatial variability in the cephalopod component of the seal diet.

  13. 19 CFR 4.11 - Sealing of stores.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Sealing of stores. 4.11 Section 4.11 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Arrival and Entry of Vessels § 4.11 Sealing of stores. Upon the..., sea stores and ship's stores not required for immediate use or consumption on board while the vessel...

  14. The Seal Killing Controversy: What Are the Facts?

    Science.gov (United States)

    Scheffer, Victor B.

    1973-01-01

    Discusses the seal controversy using the harp and Alaska fur seals to illustrate the two distinct issues, i.e., conservation (the effect of killing upon the animal population); and two, morality (the effect of killing upon the human spirit). Factual information combines with personal philosophy. (LK)

  15. Vacuum Packaging of MEMS With Multiple Internal Seal Rings

    Science.gov (United States)

    Hayworth, Ken; Yee, Karl; Shcheglov, Kirill; Bae, Youngsam; Wiberg, Dean; Peay, Chris; Challoner, Anthony

    2008-01-01

    A proposed method of design and fabrication of vacuum-packaged microelectromechanical systems (MEMS) and of individual microelectromechanical devices involves the use of multiple internal seal rings (MISRs) in conjunction with vias (through holes plated with metal for electrical contacts). The proposed method is compatible with mass production in a wafer-level fabrication process, in which the dozens of MEMS or individual microelectromechanical devices on a typical wafer are simultaneously vacuum packaged by bonding a capping wafer before the devices are singulated (cut apart by use of a dicing saw). In addition to being compatible with mass production, the proposed method would eliminate the need for some complex and expensive production steps and would yield more reliable vacuum seals. Conventionally, each MEMS or individual microelectromechanical device is fabricated as one of many identical units on a device wafer. Vacuum packaging is accomplished by bonding the device wafer to a capping wafer with metal seal rings (one ring surrounding each unit) that have been formed on the capping wafer. The electrical leads of each unit are laid out on what would otherwise be a flat surface of the device wafer, against which the seal ring is to be pressed for sealing. The resulting pattern of metal lines and their insulating oxide coverings presents a very rough and uneven surface, upon which it is difficult to pattern the sealing metal. Consequently, the seal is prone to leakage unless additional costly and complex planarization steps are performed before patterning the seal ring and bonding the wafers.

  16. Haulout site selection by southern elephant seals at Marion Island ...

    African Journals Online (AJOL)

    Using data from an ongoing mark–resight programme at Marion Island, we tested empirically whether southern elephant seals prefer certain terrestrial sites to others during the breeding, moulting and winter haulouts, and whether the pattern of site use is the same for different age and sex groups. Southern elephant seals ...

  17. Pillow seal system at the BigRIPS separator

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, K., E-mail: ktanaka@riken.jp; Inabe, N.; Yoshida, K.; Kusaka, K.; Kubo, T.

    2013-12-15

    Highlights: • Pillow seal system has been installed for a high-intensity RI-beam facility at RIKEN. • It is aimed at facilitating remote maintenance under high residual radiation. • Local radiation shields are integrated with one of the pillow seals. • Pillow seals have been aligned to the beam axis within 1mm accuracy. • A leakage rate of 10{sup –9} Pa m{sup 3}/s has been achieved with our pillow seal system. -- Abstract: We have designed and installed a pillow seal system for the BigRIPS fragment separator at the RIKEN Radioactive Isotope Beam Factory (RIBF) to facilitate remote maintenance in a radioactive environment. The pillow seal system is a device to connect a vacuum chamber and a beam tube. It allows quick attachment and detachment of vacuum connections in the BigRIPS separator and consists of a double diaphragm with a differential pumping system. The leakage rate achieved with this system is as low as 10{sup –9} Pa m{sup 3}/s. We have also designed and installed a local radiation-shielding system, integrated with the pillow seal system, to protect the superconducting magnets and to reduce the heat load on the cryogenic system. We present an overview of the pillow seal and the local shielding systems.

  18. Dry compliant seal for phosphoric acid fuel cell

    Science.gov (United States)

    Granata, Jr., Samuel J. (Inventor); Woodle, Boyd M. (Inventor)

    1990-01-01

    A dry compliant overlapping seal for a phosphoric acid fuel cell preformed f non-compliant Teflon to make an anode seal frame that encircles an anode assembly, a cathode seal frame that encircles a cathode assembly and a compliant seal frame made of expanded Teflon, generally encircling a matrix assembly. Each frame has a thickness selected to accommodate various tolerances of the fuel cell elements and are either bonded to one of the other frames or to a bipolar or end plate. One of the non-compliant frames is wider than the other frames forming an overlap of the matrix over the wider seal frame, which cooperates with electrolyte permeating the matrix to form a wet seal within the fuel cell that prevents process gases from intermixing at the periphery of the fuel cell and a dry seal surrounding the cell to keep electrolyte from the periphery thereof. The frames may be made in one piece, in L-shaped portions or in strips and have an outer perimeter which registers with the outer perimeter of bipolar or end plates to form surfaces upon which flanges of pan shaped, gas manifolds can be sealed.

  19. 7 CFR 201.36c - Hermetically-sealed containers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Hermetically-sealed containers. 201.36c Section 201... ACT FEDERAL SEED ACT REGULATIONS Advertising § 201.36c Hermetically-sealed containers. The 5-month... been met: (a) The seed was packaged within 9 months after harvest; (b) The container used does not...

  20. Mercury and selenium in wild and experimental seals

    NARCIS (Netherlands)

    Ven, van de W.S.M.; Koeman, J.H.; Svenson, A.

    1979-01-01

    This paper describes the tissue distribution of inorganic mercury, organic mercury selenium in Dutch and British seals as well as in seals which were dosed with methylmercury under experimental conditions. In the experimental animals, a time-related increase of both mercury and selenium was found in

  1. Surface sealing and hydraulic conductances under varying-intensity rains

    NARCIS (Netherlands)

    Giménez, D.; Dirksen, C.; Miedema, R.; Eppink, L.A.A.J.; Schoonderbeek, D.

    1992-01-01

    In the past, investigations on surface seals developing under simulated rains usually were performed with uniform rainfall intensities. Recent studies, however, showed that varying-intensity rains affect erosion and volumes of runoff. We conducted a study on surface sealing under varying-intensity

  2. Information entropy analysis of leopard seal vocalization bouts

    Science.gov (United States)

    Buck, John R.; Rogers, Tracey L.; Cato, Douglas H.

    2004-05-01

    Leopard seals (Hydrurga leptonyx) are solitary pinnipeds who are vocally active during their brief breeding season. The seals produce vocal bouts consisting of a sequence of distinct sounds, with an average length of roughly ten sounds. The sequential structure of the bouts is thought to be individually distinctive. Bouts recorded from five leopard seals during 1992-1994 were analyzed using information theory. The first-order Markov model entropy estimates were substantially smaller than the independent, identically distributed model entropy estimates for all five seals, indicative of constraints on the sequential structure of each seal's bouts. Each bout in the data set was classified using maximum-likelihood estimates from the first-order Markov model for each seal. This technique correctly classified 85% of the bouts, comparable to results in Rogers and Cato [Behaviour (2002)]. The relative entropies between the Markov models were found to be infinite in 18/20 possible cross-comparisons, indicating there is no probability of misclassifying the bouts in these 18 comparisons in the limit of long data sequences. One seal has sufficient data to compare a nonparametric entropy estimate with the Markov entropy estimate, finding only a small difference. This suggests that the first-order Markov model captures almost all the sequential structure in this seal's bouts.

  3. Skull morphometrics of male Subantarctic fur seals ( Arctocephalus ...

    African Journals Online (AJOL)

    Skull morphometrics of two populations of Subantarctic fur seal (Arctocephalus tropicalis) were compared in order to identify possible geographic variation as an indicator of gene flow between the populations, as well as a potential tool to identify the source of vagrant seals. Nineteen metric variables were recorded from ...

  4. Rapid recovery of Dutch gray seal colonies fueled by immigration

    NARCIS (Netherlands)

    Brasseur, S.M.J.M.; Polanen Petel, van T.; Gerrodette, T.; Meesters, E.; Reijnders, P.J.H.; Aarts, G.M.

    2015-01-01

    Gray seals were first observed breeding in the Dutch Wadden Sea in 1985, after centuries of absence. The breeding colony there is now the largest on the European continent. We describe the changes in gray seal numbers and their geographical expansion, and estimate how these processes were influenced

  5. Endoparasites of the subantarctic fur seal Arctocephalus tropicalis ...

    African Journals Online (AJOL)

    1989-03-03

    Mar 3, 1989 ... A. tropicalis is a new host record for the tetraphyllidean cestode ... of the subantarctic fur seal population of Gough Island. Necropsies were .... Seals of the world. British Mus. (Nat. Hist.) London. PAULIAN, P. 1964. Contribution a I'etude de I'otarie de l'ile Amsterdam. Mammalia 28: 1-146. SHAUGHNESSY ...

  6. Supercritical fluid chromatography of fish, shark and seal oils

    DEFF Research Database (Denmark)

    Borch-Jensen, Christina; Mollerup, Jørgen

    1996-01-01

    Various natural and treated fish, shark liver and seal oils have been analyzed by supercritical fluid chromatography (SFC) using a non-polar capillary column. The lipids are separated according to molecular mass. The lipid groups found included free fatty acids, cholesterol, squalene, vitamins, wax...... applications of SFC on fish, seal and shark liver oils are presented....

  7. Analog Video Authentication and Seal Verification Equipment Development

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Lancaster

    2012-09-01

    Under contract to the US Department of Energy in support of arms control treaty verification activities, the Savannah River National Laboratory in conjunction with the Pacific Northwest National Laboratory, the Idaho National Laboratory and Milagro Consulting, LLC developed equipment for use within a chain of custody regime. This paper discussed two specific devices, the Authentication Through the Lens (ATL) analog video authentication system and a photographic multi-seal reader. Both of these devices have been demonstrated in a field trial, and the experience gained throughout will also be discussed. Typically, cryptographic methods are used to prove the authenticity of digital images and video used in arms control chain of custody applications. However, in some applications analog cameras are used. Since cryptographic authentication methods will not work on analog video streams, a simple method of authenticating analog video was developed and tested. A photographic multi-seal reader was developed to image different types of visual unique identifiers for use in chain of custody and authentication activities. This seal reader is unique in its ability to image various types of seals including the Cobra Seal, Reflective Particle Tags, and adhesive seals. Flicker comparison is used to compare before and after images collected with the seal reader in order to detect tampering and verify the integrity of the seal.

  8. Approximate Solution for Choked Flow in Gas Seal Pads

    Science.gov (United States)

    Fleming, David P.

    2004-01-01

    Previous analyses of high pressure seals have considered adiabatic flow with friction but neglected effects of seal rotation. Most of this work analyzed a one-dimensional flow field. This works well to calculate stiffness and leakage of full circular seals, either face seals or annular ring seals. However, it cannot provide accurate results for a rectangular seal pad with its strongly two-dimensional flow field and its reliance on hydrodynamic forces to maintain a full fluid film. On the other hand, solutions of Reynolds lubrication equation have been obtained for the two-dimensional flow in a seal pad. But these solutions do not account for choking which occurs at high seal pressure ratios, nor do they consider the pressure loss that occurs in the entrance region of the flow field. The aim of the present work is to build on the Reynolds equation solution by use of an approximate choked flow analysis. This will account for the pressure losses in the flow entrance region, ensure that fluid velocities remain subsonic, and enable fluid inertial effects within the pad film to be accounted for. Results show that, in general, fluid inertia acts to decrease pad film load capacity and leakage, and increase film stiffness.

  9. Performance assessment of sealing systems. Conceptual and integrated modelling of plugs and seals

    Energy Technology Data Exchange (ETDEWEB)

    Ruebel, Andre; Buhmann, Dieter; Kindlein, Jonathan; Lauke, Thomas

    2016-08-15

    The long-time isolation of radionuclides from the biosphere is the goal of the storage of radioactive waste in deep geological repositories. For repositories in rock salt, this goal is achieved on the one hand by the impermeable undisturbed part of the salt host rock formation and on the other hand by crushed salt, which is used to backfill the mine openings in the emplacement areas and galleries created during the construction of the repository. The crushed salt backfill is compacted over time and achieves a sufficiently high hydraulic resistance to avoid inflow of brines into the emplacement areas of the repository in the long-term. Plugs and seals must additionally provide their sealing function during the early post closure phase, until the compaction of the backfill is adequate and the permeability of the backfill is sufficiently low. To assess the future development of the waste repository, an adequate knowledge of the material behaviour is necessary and related mathematical models must be developed to be able to perform predictions on the long-term safety of the repository. An integrated performance assessment model was formulated that describes the long-term behaviour of a sealing built from salt concrete. The average permeability of the sealing changes with time after its emplacement from various processes of which two were regarded in a constitutive model: first, the healing of the EDZ in the host rock around the sealing, and second, the corrosion of the salt concrete material resulting from brine attack. Empirical parameter model functions were defined for both processes to reflect the actual behaviour. The mathematical model was implemented in the integrated performance assessment model LOPOS which is used by GRS as near-field model for repositories in salt. Deterministic and probabilistic calculations were performed with realistic parameters showing how the permeability of the sealing decreases during the first 2 000 years due to the healing of the EDZ

  10. Seal with integrated shroud for androgenous docking and berthing in contaminated environments

    Science.gov (United States)

    Daniels, Christopher C. (Inventor)

    2012-01-01

    The present invention is directed to a specially configured seal system which provides a barrier to gas leakage flow between a pressurized module and its external environment. The seal includes a shroud covering which protects the sealing interface from its environment when not in use, and retracts to expose the sealing interface when mated. The seal system is constructed and arranged to mate with a seal of identical construction and arrangement or to mate with a flat surface.

  11. Asphalt emulsion sealing of uranium mill tailings. 1980 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, J.N.; Koehmstedt, P.L; Esterl, D.J.; Freeman, H.D.; Buelt, J.L.; Nelson, D.A.; Elmore, M.R.

    1981-05-01

    Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado, confirmed that an 8-cm admix seal containing 22 wt% asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation.

  12. A new era for underground mine seal construction

    Energy Technology Data Exchange (ETDEWEB)

    Fiscor, S.

    2007-11-15

    Even though many compliance questions remain about the US MSHA's emergency temporary standard (ETS) for mine seals, the industry presses forward. This article discusses the ETS which included new requirements to strengthen underground mine seals, introduced following the Sago and Darby mine disasters. The standard is based on dynamic loading. Seals should be constructed at 50 psi but the atmosphere behind them must be monitored and maintained. Mine operators must submit design and installation applications for MSHA approval. Five months down the line, several companies have 50- and 120-psi seals approved, including Precision Mine Repair, Minova, Micon and Almon Associates. Strata Mine Series has submitted a 120-psi seal for approval. The article discusses these companies' designs and their experiences and delays in obtaining approval. 4 figs.

  13. Design and analysis of seals for extended service life

    Science.gov (United States)

    Bower, Mark V.

    1992-12-01

    Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  14. A new tribological test for candidate brush seal materials evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellenstein, J.A. [Ohio Aerospace Inst. Cleveland, Ohio (United States); DellaCorte, C. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center

    1994-10-01

    A new tribological test for candidate brush seal materials evaluation has been developed. The sliding contact between the brush seal wires and their mating counterface journal is simulated by testing a small tuft of wire against the outside diameter of a high speed rotating shaft. The test configuration is similar to a standard block on ring geometry. The new tester provides the capability to measure both the friction and wear of candidate wire and counterface materials under controlled loading conditions in the gram to kilogram range. A wide test condition latitude of speeds (1 to 27 m/s), temperatures (25 to 700C), and loads (0.5 to 10 N) enables the simulation of many of the important tribological parameters found in turbine engine brush seals. This paper describes the new test rig and specimen configuration and presents initial data for candidate seal materials comparing tuft test results and wear surface morphology to field tested seal components.

  15. Analysis of hydrostatic journal bearings with end seals

    Science.gov (United States)

    San Andres, L. A.

    1992-10-01

    An approximate analysis for the pressure field and dynamic force coefficients in turbulent flow, centered hydrostatic journal bearings (HJBs) with fluid inertia and liquid compressibility effects is presented. Results from the analysis show that HJBs with end seals have increased damping, better dynamic stability characteristics, as well as lower flow rates, than conventional HJBs. However, hydrostatic (direct) stiffness may be lost if excessively tight end seals are used. End seals are shown to compensate for the effect of liquid compressibility within the recess volume, and prescribe a net reduction in the whirl frequency ratio for hybrid operation. Hydrostatic squeeze film dampers (HSFD) with end seals are shown to be a viable alternative in applications where a tight control of the bearing leakage is important such as in jet-engines. Furthermore, HSFDs with end seals could be used as an active device to control the available damping in a typical application.

  16. ALTERNATIVE METHODS OF SEALING PLANAR SOLID OXIDE FUEL CELLS

    Energy Technology Data Exchange (ETDEWEB)

    Weil, K. Scott; Coyle, Christopher A.; Hardy, John S.; Kim, Jin Yong Y.; Xia, Gordon

    2005-03-01

    One of the key limiting issues in designing and fabricating a high performance planar solid oxide fuel cell (pSOFC) stack is the development of the appropriate materials and techniques for hermetically sealing the metal and ceramic components. There are essentially two standard methods of sealing: (1) by forming a rigid joint or (2) by constructing a compressive “sliding” seal. While short-term success has been achieved with both techniques, it is apparent that to meet the long-term operational needs of stack designers, alternative sealing concepts will need to be conceived. Described below are two alternative pSOFC sealing methods that have been developed at Pacific Northwest National Laboratory.

  17. Design and analysis of seals for extended service life

    Science.gov (United States)

    Bower, Mark V.

    1992-01-01

    Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  18. Grey seal predation on forage fish in the Baltic Sea

    DEFF Research Database (Denmark)

    Eero, Aro; Neuenfeldt, Stefan; Aho, Teija

    has increased accordingly. The diet of grey seal in the Baltic consists of ca. 20 fish species. The most abundant prey items in the Baltic proper are Baltic herring, sprat, and cod, and in the Bothnian Sea and Bothnian Bay Baltic herring, Coregonus sp., Baltic salmon, and sea trout. An adult seal...... consumes on average round 4.5 kg fish per day, of which 55% are clupeoids in the Baltic Main basin and 70% in the Bothnian Sea and Bothnian Bay. According to acoustic estimates, predator– prey distribution patterns, migration patterns, and multispecies analysis (SMS), the predation effect of grey seals...... on Baltic herring and sprat stocks is still at a very low level. Hence, with present grey seal stock sizes, the impact of seal predation can be ignored in whole Baltic‐scale herring and sprat stock management considerations. Locally, however, grey seal–fishery interactions play an important role and should...

  19. Influence of Geometry on Rotordynamic Coefficients of Brush Seal

    Science.gov (United States)

    Wei, Yuan; Dowell, Earl H.; Chen, Zhaobo; Jiao, Yinghou; Zhang, Zhouqiang

    2017-05-01

    It has been observed that the geometry of a brush seal has a significant effect on the sealing performance. However, the relationship between rotordynamic coefficients and geometry factors of the brush seal itself are rarely considered. In this article, the rotordynamic coefficients of a typical single-stage brush seal for different geometries and operating conditions were numerically analyzed using CFD RANS solutions coupled with a non-Darcian porous medium model. The reaction force which plays an essential role in rotordynamic coefficients was obtained by integrating the dynamic pressure distribution. The influence of the bristle pack thickness, fence height, clearance size and other working condition parameters on aerodynamic force, stiffness coefficients, and damping coefficients of brush seal were presented and compared. In addition, the effects of various geometric configurations on pressure and flow features were also discussed.

  20. Can a gray seal (Halichoerus grypus) generalize call classes?

    Science.gov (United States)

    Stansbury, Amanda L; de Freitas, Mafalda; Wu, Gi-Mick; Janik, Vincent M

    2015-11-01

    Past researchers have found that gray seals (Halichoerus grypus) are capable of classifying vocal signals by call type using a trained set, but were unable to generalize to novel exemplars (Shapiro, Slater, & Janik, 2004). Given the importance of auditory categorization in communication, it would be surprising if the animals were unable to generalize acoustically similar calls into classes. Here, we trained a juvenile gray seal to discriminate novel calls into 2 classes, "growls" and "moans," by vocally matching call types (i.e., the seal moaned when played a moan and growled when played a growl). Our method differed from the previous study as we trained the animal using a comparatively large set of exemplars with standardized durations, consisting of both the seal's own calls and those of 2 other seals. The seal successfully discriminated growls and moans for both her own (94% correct choices) and the other seals' (87% correct choices) calls. We used a generalized linear model (GLM) and found that the seal's performance significantly improved across test sessions, and that accuracy was higher during the first presentation of a sound from her own repertoire but decreased after multiple exposures. This pattern was not found for calls from unknown seals. Factor analysis for mixed data (FAMD) identified acoustic parameters that could be used to discriminate between call types and individuals. Growls and moans differed in noise, duration and frequency parameters, whereas individuals differed only in frequency. These data suggest that the seal could have gained information about both call type and caller identity using frequency cues. (c) 2015 APA, all rights reserved).

  1. The effects of climate change on harp seals (Pagophilus groenlandicus.

    Directory of Open Access Journals (Sweden)

    David W Johnston

    Full Text Available Harp seals (Pagophilus groenlandicus have evolved life history strategies to exploit seasonal sea ice as a breeding platform. As such, individuals are prepared to deal with fluctuations in the quantity and quality of ice in their breeding areas. It remains unclear, however, how shifts in climate may affect seal populations. The present study assesses the effects of climate change on harp seals through three linked analyses. First, we tested the effects of short-term climate variability on young-of-the year harp seal mortality using a linear regression of sea ice cover in the Gulf of St. Lawrence against stranding rates of dead harp seals in the region during 1992 to 2010. A similar regression of stranding rates and North Atlantic Oscillation (NAO index values was also conducted. These analyses revealed negative correlations between both ice cover and NAO conditions and seal mortality, indicating that lighter ice cover and lower NAO values result in higher mortality. A retrospective cross-correlation analysis of NAO conditions and sea ice cover from 1978 to 2011 revealed that NAO-related changes in sea ice may have contributed to the depletion of seals on the east coast of Canada during 1950 to 1972, and to their recovery during 1973 to 2000. This historical retrospective also reveals opposite links between neonatal mortality in harp seals in the Northeast Atlantic and NAO phase. Finally, an assessment of the long-term trends in sea ice cover in the breeding regions of harp seals across the entire North Atlantic during 1979 through 2011 using multiple linear regression models and mixed effects linear regression models revealed that sea ice cover in all harp seal breeding regions has been declining by as much as 6 percent per decade over the time series of available satellite data.

  2. Experimental and Simulation Studies on Cold Welding Sealing Process of Heat Pipes

    Science.gov (United States)

    Li, Yong; Chen, Shengle; Huang, Jinlong; Yan, Yuying; Zeng, Zhixin

    2017-03-01

    Sealing quality strongly affects heat pipe performance, but few studies focus on the process of heat pipe sealing. Cold welding sealing technology based on a stamping process is applied for heat pipe sealing. The bonding mechanism of the cold welding sealing process (CWSP) is investigated and compared with the experimental results obtained from the bonding interface analysis. An orthogonal experiment is conducted to observe the effects of various parameters, including the sealing gap, sealing length, sealing diameter, and sealing velocity on bonding strength. A method with the utilization of saturated vapor pressure inside a copper tube is proposed to evaluate bonding strength. A corresponding finite element model is developed to investigate the effects of sealing gap and sealing velocity on plastic deformation during the cold welding process. Effects of various parameters on the bonding strength are determined and it is found that the sealing gap is the most critical factor and that the sealing velocity contributes the least effect. The best parameter combination ( A 1 B 3 C 1 D 3, with a 0.5 mm sealing gap, 6 mm sealing length, 3.8 mm sealing diameter, and 50 mm/s sealing velocity) is derived within the experimental parameters. Plastic deformation results derived from the finite element model are consistent with those from the experiment. The instruction for the CWSP of heat pipes and the design of sealing dies of heat pipes are provided.

  3. Hearing thresholds of harbor seals (Phoca vitulina) for playbacks of seal scarer signals, and effects of the signals on behavior

    NARCIS (Netherlands)

    Kastelein, R.A.; Helder-Hoek, L.; Gransier, R.; Terhune, J.M.; Jennings, N.; Jong, C.A.F. de

    2015-01-01

    Acoustic mitigation devices (AMDs) are used to deter marine mammals from construction sites to prevent hearing injury by offshore pile-driving noise. In order to quantify the distance at which AMDs designed as ‘seal scarers’ are detected by seals, the 50% hearing thresholds for playbacks of their

  4. Interaction between Monk Seals, Monachus monachus (Hermann, 1779), and artisanal fisheries in the Foca Pilot Monk Seal conservation area, Turkey

    NARCIS (Netherlands)

    Guclusoy, H.

    2008-01-01

    The present study examines some aspects of the interaction between critically endangered Monk Seals Monachus monachus and artisanal fisheries in the Foc¿a Pilot Monk Seal Conservation Area, Turkey, between 1994 and 2002. One to four permanent researchers collected the data on this interaction during

  5. Damage by monk seals to gear of the artisanal fishery in the Foca Monk Seal Pilot Conservation Area, Turkey

    NARCIS (Netherlands)

    Guclusoy, H.

    2008-01-01

    The present study examines the operational interaction between critically endangered monk seals Monachus monachus and artisanal fisheries in the Foc¿a Pilot Monk Seal Conservation Area, Turkey between 1994 and 2002. One to four permanent researchers collected the data on this interaction during the

  6. Environmental contaminants in the food chain, NWS Seal Beach and Seal Beach NWR

    Energy Technology Data Exchange (ETDEWEB)

    Ohlendorf, H.M.; Byron, E.R. [CH2M Hill, Sacramento, CA (United States); Freas, K.E. [CH2M Hill, San Jose, CA (United States); Casados, E.M.; Kidwell, J.J. [Naval Facilities Engineering Command, San Diego, CA (United States). SW Division

    1994-12-31

    The authors conducted a study to determine whether environmental contaminants occurred in fish and invertebrates at concentrations that could be harmful to birds feeding in the estuarine salt marsh at Seal Beach National Wildlife Refuge (NWR), which is part of Naval Weapons Station (NWS) Seal Beach. Management of the refuge is focused primarily on endangered species, especially the light-footed clapper rail and the California least tern. Important food-chain organisms taken by rails (e.g., crabs and snails) and least terns (small fish) were sampled and analyzed for inorganic and organic contaminants that might be related to Navy activities at the Station. Results indicated that those contaminants are not likely to have lethal effects on rails or terns, although some chemicals (including cadmium, chromium, copper, lead, zinc and DDE) occurred at elevated concentrations in portions of the marsh. Possible sublethal effects also were evaluated and will be discussed.

  7. Sliding seal materials for adiabatic engines

    Science.gov (United States)

    Lankford, J.

    1985-01-01

    The sliding friction coefficients and wear rates of promising carbide, oxide, and nitride materials were measured under temperature, environmental, velocity, loading conditions that are representative of the adiabatic engine environment. In order to provide guidance needed to improve materials for this application, the program stressed fundamental understanding of the mechanisms involved in friction and wear. Microhardness tests were performed on the candidate materials at elevated temperatures, and in atmospheres relevant to the piston seal application, and optical and electron microscopy were used to elucidate the micromechanisms of wear following wear testing. X-ray spectroscopy was used to evaluate interface/environment interactions which seemed to be important in the friction and wear process. Electrical effects in the friction and wear processes were explored in order to evaluate the potential usefulness of such effects in modifying the friction and wear rates in service. However, this factor was found to be of negligible significance in controlling friction and wear.

  8. Secure passive RFID tag with seal

    Science.gov (United States)

    Nekoogar, Faranak; Reynolds, Matthew; Lefton, Scott; Dowla, Farid; Twogood, Richard

    2017-11-14

    A secure passive RFID tag system comprises at least one base station and at least one passive RFID tag. The tag includes a fiber optic cable with the cable ends sealed within the tag and the middle portion forming an external loop. The loop may be secured to at least portions of an object. The tag transmits and receives an optical signal through the fiber optic cable, and the cable is configured to be damaged or broken in response to removal or tampering attempts, wherein the optical signal is significantly altered if the cable is damaged or broken. The tag transmits the optical signal in response to receiving a radio signal from the base station and compares the transmitted optical signal to the received optical signal. If the transmitted optical signal and the received optical signal are identical, the tag transmits an affirmative radio signal to the base station.

  9. Diurnal variations in a sealed radon chamber

    Science.gov (United States)

    Gilboy, W. B.; James, P. R.; Farmer, C. P.; Beard, J. E.

    1990-12-01

    During experiments to calibrate a radon-in-air counter, some unexpected diurnal variations have been observed. Inside the sealed stainless-steel chamber of a nominal volume of 3 litres, ionised 218Po atoms from the alpha-decay of 222Rn are attracted by an electric field to a ZnS(Ag) scintillation screen via which subsequent α-decay events are detected. Results for this configuration are presented and also for a modified version in which the scintillation screen is replaced by a high-resolution α-detector. Ambient temperature changes were suspected to be responsible for the observed counting-efficiency variation and this has been confirmed by operating the wall of the chamber at various temperatures between 0°C and about 40°C, which revealed a positive temperature coefficient of ˜1%/°C at 25°C. Possible reasons for this effect are considered.

  10. Multiple-Pulse Sounds and Seals: Results of a Harbor Seal (Phoca vitulina) Telemetry Study During Wind Farm Construction.

    Science.gov (United States)

    Hastie, Gordon D; Russell, Debbie J F; McConnell, Bernie; Thompson, Dave; Janik, Vincent M

    2016-01-01

    Offshore construction and survey techniques can produce pulsed sounds with a high sound pressure level. In coastal waters, the areas in which they are produced are often also used by seals, potentially resulting in auditory damage or behavioral avoidance. Here, we describe a study on harbor seals during a wind farm installation off southeast England. The study used GPS/global system for mobile communication tags on 23 harbor seals that provided distribution and activity data; the closest range of individual seals to piling varied from 6.65 to 46.1 km. Furthermore, the maximum predicted received levels (RLs) at individual seals varied between 146.9 and 169.4 dB re 1 μPa peak to peak.

  11. The Mechanical Performance of Subscale Candidate Elastomer Docking Seals

    Science.gov (United States)

    Bastrzyk, Marta B.; Daniels, Christopher C.

    2010-01-01

    The National Aeronautics and Space Administration is developing a Low Impact Docking System (LIDS) for future exploration missions. The mechanism is a new state-of-the-art device for in-space assembly of structures and rendezvous of vehicles. At the interface between two pressurized modules, each with a version of the LIDS attached, a composite elastomer-metal seal assembly prevents the breathable air from escaping into the vacuum of space. Attached to the active LIDS, this seal mates against the passive LIDS during docking operation. The main interface seal assembly must exhibit low leak and outgas values, must be able to withstand various harsh space environments, must remain operational over a range of temperatures from -50 C to 75 C, and perform after numerous docking cycles. This paper presents results from a comprehensive study of the mechanical performance of four candidate subscale seal assembly designs at -50, 23, 50, and 75 C test temperatures. In particular, the force required to fully compress the seal during docking, and that which is required for separation during the undocking operation were measured. The height of subscale main interface seal bulbs, as well as the test temperature, were shown to have a significant effect on the forces the main interface seal of the LIDS may experience during docking and undocking operations. The average force values required to fully compress each of the seal assemblies were shown to increase with test temperature by approximately 50% from -50 to 75 C. Also, the required compression forces were shown to increase as the height of the seal bulb was increased. The seal design with the tallest elastomer seal bulb, which was 31% taller than that with the shortest bulb, required force values approximately 45% higher than those for the shortest bulb, independent of the test temperature. The force required to separate the seal was shown to increase with decreasing temperature after 15 hours of simulated docking. No adhesion

  12. Sealing of investigation boreholes, Phase 4 - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Pusch, Roland [Drawrite AB, Luleaa Technical University, Luleaa (Sweden); Ramqvist, Gunnar [El-Tekno AB, Figeholm (Sweden); Bockgaard, Niclas [Golder Associates, Goeteborg (Sweden); Ekman, Lennart [LE Geokonsult AB, Baelinge (Sweden)

    2011-09-15

    The report describes the outcome of Phase 4 of the project 'Sealing of investigation boreholes', which deals with 1) characterization and planning of borehole sealing, 2) performance and quality assessment, 3) sealing of large diameter holes, and 4) interaction of clay and concrete plugs. A specific goal was to find ways to characterize, plan and seal of boreholes so that their impact on the overall hydraulic performance of the repository rock can predicted and controlled. The work comprised selection of representative 'reference holes' at the Laxemar and Forsmark sites for development of a general programme for planning and simulating implementation of borehole plugging campaigns, considering also cost issues. A second aim was to define and quantify the role of seals in the reference holes for finding out how important sealing really is. A third was to test a practical way to seal large diameter boreholes and a fourth to find out how concrete matures and performs in contact with smectite clay. The study demonstrated, in conclusion, the need for developing techniques for preparing deep boreholes before lasting seals are installed in them, since poor sealing can short-circuit hydraulically important fracture zones intersected by the holes. The practically oriented sealing activities showed that the technique developed for tight sealing of large-diameter boreholes is practical and feasible. The issue of chemical stability was investigated by testing the performance and constitution of a plug consisting of CBI concrete in contact with smectite-rich seals for almost three years. This study showed that none of them underwent substantial degradation in this period of time, but chemical reactions and thereby generated changes in physical behaviour of the plug components had taken place, particularly in the clay. The rate of degradation is, however, not yet known. It was concluded from this study that it is suitable to carry out a corresponding

  13. Behavioral effects of environmental enrichment on harbor seals (Phoca vitulina concolor) and gray seals (Halichoerus grypus)

    Science.gov (United States)

    Hunter, S.A.; Bay, M.S.; Martin, M.L.; Hatfield, J.S.

    2002-01-01

    Zoos and aquariums have been incorporating environmental enrichment into their animal care programs for the past 30 years to increase mental stimulation and promote natural behaviors. However, most attempts to document the effects of enrichment on animal behavior have focused on terrestrial mammals. Staff at the National Aquarium in Baltimore conducted an investigation of the behavioral effects of enrichment on the seven harbor seals and two gray seals housed in the aquarium's outdoor seal exhibit. We expected that enrichment would change the amount of time the animals spent engaged in specific behaviors. The behaviors recorded were: resting in water, resting hauled out, maintenance, breeding display, breeding behavior, aggression, pattern swimming, random swimming, exploration, and out of sight. Activity levels (random swimming and exploration) were expected to increase, while stereotypic behaviors (pattern swimming) were expected to decrease. The frequency and duration of behaviors were documented for 90 hr in both the control phase (without enrichment) and the experimental phase (with enrichment). Statistically significant differences (P captivity. ?? 2002 Wiley-Liss, Inc.

  14. Behavioral effects of environmental enrichment on harbor seals (Phoca vitulina concolor) and gray seals (Hafichoerus grypus)

    Science.gov (United States)

    Hunter, S.A.; Bay, M.S.; Martin, M.L.; Hatfield, J.S.

    2002-01-01

    Zoos and aquariums have been incorporating environmental enrichment into their animal care programs for the past 30 years to increase mental stimulation and promote natural behaviors. However, most attempts to document the effects of enrichment on animal behavior have focused on terrestrial mammals. Staff at the National Aquarium in Baltimore conducted an investigation of the behavioral effects of enrichment on the seven harbor seals and two gray seals housed in the aquarium's outdoor seal exhibit. We expected that enrichment would change the amount of time the animals spent engaged in specific behaviors. The behaviors recorded were: resting in water, resting hauled out, maintenance, breeding display, breeding behavior, aggression, pattern swimming, random swimming, exploration, and out of sight. Activity levels (random swimming and exploration) were expected to increase, while stereotypic behaviors (pattern swimming) were expected to decrease. The frequency and duration of behaviors were documented for 90 hr in both the control phase (without enrichment) and the experimental phase (with enrichment). Statistically significant differences (Pcaptivity.

  15. Investigation of carbon dioxide in the South Atlantic and northern Weddell Sea areas (WOCE Sections A-12 and A-21) during the METEOR expedition 11/5, January--March 1990

    Energy Technology Data Exchange (ETDEWEB)

    Chipman, D.W.; Takahashi, Taro; Breger, D.; Sutherland, S.C.

    1991-12-01

    This report summarizes the results of investigation the oceanographic expedition aboard the F/S METEOR in South Atlantic Ocean including the Drake Passage, the northern Weddell Sea and the eastern South Atlantic during the austral summer of January through March 1990. The total CO{sub 2} concentration in about 1300 seawater samples and CO{sub 2} partial pressure (pCO{sub 2}) in about 870 seawater samples collected at 77 stations were determined aboard the ship using a coulometer and equilibrator/gas chromatograph system. The temperature, salinity, dissolved oxygen and nutrient salt data presented in this report were determined by other participants of the expedition including the members of the Oceanographic Data Facility of the Scripps Institution of Oceanography, Argentine Hydrographic Office and German institutions.

  16. Investigation of carbon dioxide in the South Atlantic and northern Weddell Sea areas (WOCE Sections A-12 and A-21) during the METEOR expedition 11/5, January--March 1990. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Chipman, D.W.; Takahashi, Taro; Breger, D.; Sutherland, S.C.

    1991-12-01

    This report summarizes the results of investigation the oceanographic expedition aboard the F/S METEOR in South Atlantic Ocean including the Drake Passage, the northern Weddell Sea and the eastern South Atlantic during the austral summer of January through March 1990. The total CO{sub 2} concentration in about 1300 seawater samples and CO{sub 2} partial pressure (pCO{sub 2}) in about 870 seawater samples collected at 77 stations were determined aboard the ship using a coulometer and equilibrator/gas chromatograph system. The temperature, salinity, dissolved oxygen and nutrient salt data presented in this report were determined by other participants of the expedition including the members of the Oceanographic Data Facility of the Scripps Institution of Oceanography, Argentine Hydrographic Office and German institutions.

  17. Engine panel seals for hypersonic engine applications: High temperature leakage assessments and flow modelling

    Science.gov (United States)

    Steinetz, Bruce M.; Mutharasan, Rajakkannu; Du, Guang-Wu; Miller, Jeffrey H.; Ko, Frank

    1992-01-01

    A critical mechanical system in advanced hypersonic engines is the panel-edge seal system that seals gaps between the articulating horizontal engine panels and the adjacent engine splitter walls. Significant advancements in seal technology are required to meet the extreme demands placed on the seals, including the simultaneous requirements of low leakage, conformable, high temperature, high pressure, sliding operation. In this investigation, the seal concept design and development of two new seal classes that show promise of meeting these demands will be presented. These seals include the ceramic wafer seal and the braided ceramic rope seal. Presented are key elements of leakage flow models for each of these seal types. Flow models such as these help designers to predict performance-robbing parasitic losses past the seals, and estimate purge coolant flow rates. Comparisons are made between measured and predicted leakage rates over a wide range of engine simulated temperatures and pressures, showing good agreement.

  18. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Univ. of California, Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  19. Evaluation of a Conductive Elastomer Seal for Spacecraft

    Science.gov (United States)

    Daniels, Christopher C.; Mather, Janice L.; Oravec, Heather A.; Dunlap, Patrick H., Jr.

    2016-01-01

    An electrically conductive elastomer was evaluated as a material candidate for a spacecraft seal. The elastomer used electrically conductive constituents as a means to reduce the resistance between mating interfaces of a sealed joint to meet spacecraft electrical bonding requirements. The compound's outgassing levels were compared against published NASA requirements. The compound was formed into a hollow O-ring seal and its compression set was measured. The O-ring seal was placed into an interface and the electrical resistance and leak rate were quantified. The amount of force required to fully compress the test article in the sealing interface and the force needed to separate the joint were also measured. The outgassing and resistance measurements were below the maximum allowable levels. The room temperature compression set and leak rates were fairly high when compared against other typical spacecraft seal materials, but were not excessive. The compression and adhesion forces were desirably low. Overall, the performance of the elastomer compound was sufficient to be considered for future spacecraft seal applications.

  20. Test of Seal System for Flexible Pipe End Fitting

    DEFF Research Database (Denmark)

    Banke, Lars; Jensen, Thomas Gregers

    1999-01-01

    The purpose of the end fitting seal system is to ensure leak proof termination of flexible pipes. The seal system of an NKT end fitting normally consists of a number of ring joint gaskets mounted in a steel sleeve on the outside of the polymeric inner liner of the pipe. The seal system is activated...... by compression of the gaskets, thus using the geometry to establish a seal towards the inner liner of the pipe and the steel sleeve of the end fitting. This paper describes how the seal system of an end fitting can be tested using an autoclave. By regulating temperature and pressure, the seal system can...... be tested up to 130oC and 51.7 MPa. Pressure, temperature and the mechanical behaviours of the pipe are measured for use in further research. The set-up is used to test the efficiency of the seal system as function of parameters such as cross sectional shapes of the gaskets, tolerances between gaskets...