WorldWideScience

Sample records for web growth method

  1. Advanced dendritic web growth development

    Science.gov (United States)

    Hopkins, R. H.

    1985-01-01

    A program to develop the technology of the silicon dendritic web ribbon growth process is examined. The effort is being concentrated on the area rate and quality requirements necessary to meet the JPL/DOE goals for terrestrial PV applications. Closed loop web growth system development and stress reduction for high area rate growth is considered.

  2. Large-area sheet task advanced dendritic web growth development

    Science.gov (United States)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.

    1984-01-01

    The thermal models used for analyzing dendritic web growth and calculating the thermal stress were reexamined to establish the validity limits imposed by the assumptions of the models. Also, the effects of thermal conduction through the gas phase were evaluated and found to be small. New growth designs, both static and dynamic, were generated using the modeling results. Residual stress effects in dendritic web were examined. In the laboratory, new techniques for the control of temperature distributions in three dimensions were developed. A new maximum undeformed web width of 5.8 cm was achieved. A 58% increase in growth velocity of 150 micrometers thickness was achieved with dynamic hardware. The area throughput goals for transient growth of 30 and 35 sq cm/min were exceeded.

  3. Large area sheet task: Advanced dendritic web growth development

    Science.gov (United States)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.; Meier, D.; Schruben, J.

    1981-01-01

    The growth of silicon dendritic web for photovoltaic applications was investigated. The application of a thermal model for calculating buckling stresses as a function of temperature profile in the web is discussed. Lid and shield concepts were evaluated to provide the data base for enhancing growth velocity. An experimental web growth machine which embodies in one unit the mechanical and electronic features developed in previous work was developed. In addition, evaluation of a melt level control system was begun, along with preliminary tests of an elongated crucible design. The economic analysis was also updated to incorporate some minor cost changes. The initial applications of the thermal model to a specific configuration gave results consistent with experimental observation in terms of the initiation of buckling vs. width for a given crystal thickness.

  4. Evaluating company growth potential using AI and web media data

    DEFF Research Database (Denmark)

    Droll, Andrew; Khan, Shahzad; Tanev, Stoyan

    2017-01-01

    The article focuses on adapting and validating the use of an existing web search and analytics engine to evaluate the growth and competitive potential of new technology start-ups and existing firms in the newly emerging precision medicine sector. The results are based on two different search...... includes new technology firms in the same sector. The firms in the second sample were used as test cases in examining if their growth related web search scores would relate to the degree of their innovativeness. The second part of the study applied the same methodology to the real time monitoring of firms...

  5. Web Page Classification Method Using Neural Networks

    Science.gov (United States)

    Selamat, Ali; Omatu, Sigeru; Yanagimoto, Hidekazu; Fujinaka, Toru; Yoshioka, Michifumi

    Automatic categorization is the only viable method to deal with the scaling problem of the World Wide Web (WWW). In this paper, we propose a news web page classification method (WPCM). The WPCM uses a neural network with inputs obtained by both the principal components and class profile-based features (CPBF). Each news web page is represented by the term-weighting scheme. As the number of unique words in the collection set is big, the principal component analysis (PCA) has been used to select the most relevant features for the classification. Then the final output of the PCA is combined with the feature vectors from the class-profile which contains the most regular words in each class before feeding them to the neural networks. We have manually selected the most regular words that exist in each class and weighted them using an entropy weighting scheme. The fixed number of regular words from each class will be used as a feature vectors together with the reduced principal components from the PCA. These feature vectors are then used as the input to the neural networks for classification. The experimental evaluation demonstrates that the WPCM method provides acceptable classification accuracy with the sports news datasets.

  6. GROUPING WEB ACCESS SEQUENCES uSING SEQUENCE ALIGNMENT METHOD

    OpenAIRE

    BHUPENDRA S CHORDIA; KRISHNAKANT P ADHIYA

    2011-01-01

    In web usage mining grouping of web access sequences can be used to determine the behavior or intent of a set of users. Grouping websessions is how to measure the similarity between web sessions. There are many shortcomings in traditional measurement methods. The taskof grouping web sessions based on similarity and consists of maximizing the intra-group similarity while minimizing the inter-groupsimilarity is done using sequence alignment method. This paper introduces a new method to group we...

  7. Plastic deformation of silicon dendritic web ribbons during the growth

    Science.gov (United States)

    Cheng, L. J.; Dumas, K. A.; Su, B. M.; Leipold, M. H.

    1984-01-01

    The distribution of slip dislocations in silicon dendritic web ribbons due to plastic deformation during the cooling phase of the growth was studied. The results show the existence of two distinguishable stress regions across the ribbon formed during the plastic deformation stage, namely, shear stress at the ribbon edges and tensile stress at the middle. In addition, slip dislocations caused by shear stress near the edges appear to originate at the twin plane.

  8. Models and methods for building web recommendation systems

    OpenAIRE

    Stekh, Yu.; Artsibasov, V.

    2012-01-01

    Modern Word Wide Web contains a large number of Web sites and pages in each Web site. Web recommendation system (recommendation system for web pages) are typically implemented on web servers and use the data obtained from the collection viewed web templates (implicit data) or user registration data (explicit data). In article considering methods and algorithms of web recommendation system based on the technology of data mining (web mining). Сучасна мережа Інтернет містить велику кількість веб...

  9. PMAnalyzer: a new web interface for bacterial growth curve analysis.

    Science.gov (United States)

    Cuevas, Daniel A; Edwards, Robert A

    2017-06-15

    Bacterial growth curves are essential representations for characterizing bacteria metabolism within a variety of media compositions. Using high-throughput, spectrophotometers capable of processing tens of 96-well plates, quantitative phenotypic information can be easily integrated into the current data structures that describe a bacterial organism. The PMAnalyzer pipeline performs a growth curve analysis to parameterize the unique features occurring within microtiter wells containing specific growth media sources. We have expanded the pipeline capabilities and provide a user-friendly, online implementation of this automated pipeline. PMAnalyzer version 2.0 provides fast automatic growth curve parameter analysis, growth identification and high resolution figures of sample-replicate growth curves and several statistical analyses. PMAnalyzer v2.0 can be found at https://edwards.sdsu.edu/pmanalyzer/ . Source code for the pipeline can be found on GitHub at https://github.com/dacuevas/PMAnalyzer . Source code for the online implementation can be found on GitHub at https://github.com/dacuevas/PMAnalyzerWeb . dcuevas08@gmail.com. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press.

  10. A study on the personalization methods of the web | Hajighorbani ...

    African Journals Online (AJOL)

    ... methods of correct patterns and analyze them. Here we will discuss the basic concepts of web personalization and consider the three approaches of web personalization and we evaluated the methods belonging to each of them. Keywords: personalization, search engine, user preferences, data mining methods ...

  11. Methods of Usability Testing in Libraries Web Sites

    Directory of Open Access Journals (Sweden)

    Eman Fawzy

    2006-03-01

    Full Text Available A Study about libraries' web sites evaluation, that is the Usability, the study talking about methods of usability testing and define it, and its important in web sites evaluation, then details the methods of usability: questionnaire, core groups, testing experimental model, cards arrangement, and composed evaluation.

  12. Large area sheet task. Advanced dendritic web growth development. [silicon films

    Science.gov (United States)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.; Meier, D.; Frantti, E.; Schruben, J.

    1981-01-01

    The development of a silicon dendritic web growth machine is discussed. Several refinements to the sensing and control equipment for melt replenishment during web growth are described and several areas for cost reduction in the components of the prototype automated web growth furnace are identified. A circuit designed to eliminate the sensitivity of the detector signal to the intensity of the reflected laser beam used to measure melt level is also described. A variable speed motor for the silicon feeder is discussed which allows pellet feeding to be accomplished at a rate programmed to match exactly the silicon removed by web growth.

  13. Gaining insight into food webs reconstructed by the inverse method

    NARCIS (Netherlands)

    Kones, J.; Soetaert, K.E.R.; Van Oevelen, D.; Owino, J.; Mavuti, K.

    2006-01-01

    The use of the inverse method to analyze flow patterns of organic components in ecological systems has had wide application in ecological modeling. Through this approach, an infinite number of food web flows describing the food web and satisfying biological constraints are generated, from which one

  14. WSDM : A user-centred design method for web sites

    NARCIS (Netherlands)

    de Troyer, O.M.F.; Leune, C.J.

    1998-01-01

    WSDM is a user-centered method for the design of kiosk Web Sites. By explicitly starting from the requirements of the users or visitors, WSDM solves Web site problems that are primarily caused by that fact that a site has no underlying design at all, or that the design is mostly data-driven.

  15. Social network extraction based on Web: 1. Related superficial methods

    Science.gov (United States)

    Khairuddin Matyuso Nasution, Mahyuddin

    2018-01-01

    Often the nature of something affects methods to resolve the related issues about it. Likewise, methods to extract social networks from the Web, but involve the structured data types differently. This paper reveals several methods of social network extraction from the same sources that is Web: the basic superficial method, the underlying superficial method, the description superficial method, and the related superficial methods. In complexity we derive the inequalities between methods and so are their computations. In this case, we find that different results from the same tools make the difference from the more complex to the simpler: Extraction of social network by involving co-occurrence is more complex than using occurrences.

  16. A Method for Transforming Existing Web Service Descriptions into an Enhanced Semantic Web Service Framework

    Science.gov (United States)

    Du, Xiaofeng; Song, William; Munro, Malcolm

    Web Services as a new distributed system technology has been widely adopted by industries in the areas, such as enterprise application integration (EAI), business process management (BPM), and virtual organisation (VO). However, lack of semantics in the current Web Service standards has been a major barrier in service discovery and composition. In this chapter, we propose an enhanced context-based semantic service description framework (CbSSDF+) that tackles the problem and improves the flexibility of service discovery and the correctness of generated composite services. We also provide an agile transformation method to demonstrate how the various formats of Web Service descriptions on the Web can be managed and renovated step by step into CbSSDF+ based service description without large amount of engineering work. At the end of the chapter, we evaluate the applicability of the transformation method and the effectiveness of CbSSDF+ through a series of experiments.

  17. A Web service substitution method based on service cluster nets

    Science.gov (United States)

    Du, YuYue; Gai, JunJing; Zhou, MengChu

    2017-11-01

    Service substitution is an important research topic in the fields of Web services and service-oriented computing. This work presents a novel method to analyse and substitute Web services. A new concept, called a Service Cluster Net Unit, is proposed based on Web service clusters. A service cluster is converted into a Service Cluster Net Unit. Then it is used to analyse whether the services in the cluster can satisfy some service requests. Meanwhile, the substitution methods of an atomic service and a composite service are proposed. The correctness of the proposed method is proved, and the effectiveness is shown and compared with the state-of-the-art method via an experiment. It can be readily applied to e-commerce service substitution to meet the business automation needs.

  18. Legacy effects of drought on plant growth and the soil food web

    DEFF Research Database (Denmark)

    de Vries, Franciska; Liiri, Mira; Strandmark, Lisa Bjørnlund

    2012-01-01

    the potential to feed back on each other's performance. In a greenhouse experiment, we compared legacy effects of repeated drought on plant growth and the soil food web in two contrasting land-use systems: extensively managed grassland, rich in C and with a fungal-based food web, and intensively managed wheat...... lower in C and with a bacterial-based food web. Moreover, we assessed the effect of plant presence on the recovery of the soil food web after drought. Drought legacy effects increased plant growth in both systems, and a plant strongly reduced N leaching. Fungi, bacteria, and their predators were more...... resilient after drought in the grassland soil than in the wheat soil. The presence of a plant strongly affected the composition of the soil food web, and alleviated the effects of drought for most trophic groups, regardless of the system. This effect was stronger for the bottom trophic levels, whose...

  19. Large-area sheet task: Advanced dendritic-web-growth development

    Science.gov (United States)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Schruben, J.

    1983-01-01

    Thermally generated stresses in the growing web crystal were reduced. These stresses, which if too high cause the ribbon to degenerate, were reduced by a factor of three, resulting in the demonstrated growth of high-quality web crystals to widths of 5.4 cm. This progress was brought about chiefly by the application of thermal models to the development of low-stress growth configurations. A new temperature model was developed which can analyze the thermal effects of much more complex lid and top shield configurations than was possible with the old lumped shield model. Growth experiments which supplied input data such as actual shield temperature and melt levels were used to verify the modeling results. Desirable modifications in the melt level-sensing circuitry were made in the new experimental web growth furnace, and this furnace has been used to carry out growth experiments under steady-state conditions. New growth configurations were tested in long growth runs at Westinghouse AESD which produced wider, lower stress and higher quality web crystals than designs previously used.

  20. An Accounting Method for Economic Growth

    OpenAIRE

    Hongchun Zhao

    2012-01-01

    As Chari et al. (2007) indicate, many growth theories explaining frictions in real economies are equivalent to a competitive economy, with some exogenous taxes. Using this idea, I developed an accounting method for identifying fundamental causes of economic growth. A two-sector neoclassical growth model with taxes is used as a prototype economy, and its equilibrium conditions define wedges. These wedges endogenously determine the long run growth rate, which is exogenous and not correlated wit...

  1. A design method for an intuitive web site

    Energy Technology Data Exchange (ETDEWEB)

    Quinniey, M.L.; Diegert, K.V.; Baca, B.G.; Forsythe, J.C.; Grose, E.

    1999-11-03

    The paper describes a methodology for designing a web site for human factor engineers that is applicable for designing a web site for a group of people. Many web pages on the World Wide Web are not organized in a format that allows a user to efficiently find information. Often the information and hypertext links on web pages are not organized into intuitive groups. Intuition implies that a person is able to use their knowledge of a paradigm to solve a problem. Intuitive groups are categories that allow web page users to find information by using their intuition or mental models of categories. In order to improve the human factors engineers efficiency for finding information on the World Wide Web, research was performed to develop a web site that serves as a tool for finding information effectively. The paper describes a methodology for designing a web site for a group of people who perform similar task in an organization.

  2. Growth and structure of the World Wide Web: Towards realistic modeling

    Science.gov (United States)

    Tadić, Bosiljka

    2002-08-01

    We simulate evolution of the World Wide Web from the dynamic rules incorporating growth, bias attachment, and rewiring. We show that the emergent double-hierarchical structure with distinct distributions of out- and in-links is comparable with the observed empirical data when the control parameter (average graph flexibility β) is kept in the range β=3-4. We then explore the Web graph by simulating (a) Web crawling to determine size and depth of connected components, and (b) a random walker that discovers the structure of connected subgraphs with dominant attractor and promoter nodes. A random walker that adapts its move strategy to mimic local node linking preferences is shown to have a short access time to "important" nodes on the Web graph.

  3. A Survey On Various Web Template Detection And Extraction Methods

    Directory of Open Access Journals (Sweden)

    Neethu Mary Varghese

    2015-03-01

    Full Text Available Abstract In todays digital world reliance on the World Wide Web as a source of information is extensive. Users increasingly rely on web based search engines to provide accurate search results on a wide range of topics that interest them. The search engines in turn parse the vast repository of web pages searching for relevant information. However majority of web portals are designed using web templates which are designed to provide consistent look and feel to end users. The presence of these templates however can influence search results leading to inaccurate results being delivered to the users. Therefore to improve the accuracy and reliability of search results identification and removal of web templates from the actual content is essential. A wide range of approaches are commonly employed to achieve this and this paper focuses on the study of the various approaches of template detection and extraction that can be applied across homogenous as well as heterogeneous web pages.

  4. A method for automating the extraction of specialized information from the web

    NARCIS (Netherlands)

    Lin, L.; Liotta, A.; Hippisley, A.; Hao, Y.; Liu, J.; Wang, Y.; Cheung, Y-M.; Yin, H.; Jiao, L.; Ma, j.; Jiao, Y-C.

    2005-01-01

    The World Wide Web can be viewed as a gigantic distributed database including millions of interconnected hosts some of which publish information via web servers or peer-to-peer systems. We present here a novel method for the extraction of semantically rich information from the web in a fully

  5. Using a Web Site in an Elementary Science Methods Class: Are We Opening a Pandora's Box?

    Science.gov (United States)

    Lewis, Scott P.; O'Brien, George E.

    This paper describes the introduction and use of the World Wide Web (WWW) in an elementary science methods course at Florida International University (FIU). The goals of creating a web site include engaging conversations among educators, providing access to local resources for students, and examining student use of web sites and the Internet. The…

  6. EVALUATION OF WEB SEARCHING METHOD USING A NOVEL WPRR ALGORITHM FOR TWO DIFFERENT CASE STUDIES

    Directory of Open Access Journals (Sweden)

    V. Lakshmi Praba

    2012-04-01

    Full Text Available The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to web data and documents. Web content mining and web structure mining have important roles in identifying the relevant web page. Relevancy of web page denotes how well a retrieved web page or set of web pages meets the information need of the user. Page Rank, Weighted Page Rank and Hypertext Induced Topic Selection (HITS are existing algorithms which considers only web structure mining. Vector Space Model (VSM, Cover Density Ranking (CDR, Okapi similarity measurement (Okapi and Three-Level Scoring method (TLS are some of existing relevancy score methods which consider only web content mining. In this paper, we propose a new algorithm, Weighted Page with Relevant Rank (WPRR which is blend of both web content mining and web structure mining that demonstrates the relevancy of the page with respect to given query for two different case scenarios. It is shown that WPRR’s performance is better than the existing algorithms.

  7. Towards the multilingual semantic web principles, methods and applications

    CERN Document Server

    Buitelaar, Paul

    2014-01-01

    To date, the relation between multilingualism and the Semantic Web has not yet received enough attention in the research community. One major challenge for the Semantic Web community is to develop architectures, frameworks and systems that can help in overcoming national and language barriers, facilitating equal access to information produced in different cultures and languages. As such, this volume aims at documenting the state-of-the-art with regard to the vision of a Multilingual Semantic Web, in which semantic information will be accessible in and across multiple languages. The Multiling

  8. THE GROWTH POINTS OF STATISTICAL METHODS

    OpenAIRE

    Orlov A. I.

    2014-01-01

    On the basis of a new paradigm of applied mathematical statistics, data analysis and economic-mathematical methods are identified; we have also discussed five topical areas in which modern applied statistics is developing as well as the other statistical methods, i.e. five "growth points" – nonparametric statistics, robustness, computer-statistical methods, statistics of interval data, statistics of non-numeric data

  9. Linking functional response and bioenergetics to estimate juvenile salmon growth in a reservoir food web

    Science.gov (United States)

    Haskell, Craig A.; Beauchamp, David A.; Bollens, Stephen M.

    2017-01-01

    Juvenile salmon (Oncorhynchus spp.) use of reservoir food webs is understudied. We examined the feeding behavior of subyearling Chinook salmon (O. tshawytscha) and its relation to growth by estimating the functional response of juvenile salmon to changes in the density of Daphnia, an important component of reservoir food webs. We then estimated salmon growth across a broad range of water temperatures and daily rations of two primary prey, Daphnia and juvenile American shad (Alosa sapidissima) using a bioenergetics model. Laboratory feeding experiments yielded a Type-II functional response curve: C = 29.858 P *(4.271 + P)-1 indicating that salmon consumption (C) of Daphnia was not affected until Daphnia densities (P) were < 30 · L-1. Past field studies documented Daphnia densities in lower Columbia River reservoirs of < 3 · L-1 in July but as high as 40 · L-1 in August. Bioenergetics modeling indicated that subyearlings could not achieve positive growth above 22°C regardless of prey type or consumption rate. When feeding on Daphnia, subyearlings could not achieve positive growth above 20°C (water temperatures they commonly encounter in the lower Columbia River during summer). At 16–18°C, subyearlings had to consume about 27,000 Daphnia · day-1 to achieve positive growth. However, when feeding on juvenile American shad, subyearlings had to consume 20 shad · day-1 at 16–18°C, or at least 25 shad · day-1 at 20°C to achieve positive growth. Using empirical consumption rates and water temperatures from summer 2013, subyearlings exhibited negative growth during July (-0.23 to -0.29 g · d-1) and August (-0.05 to -0.07 g · d-1). By switching prey from Daphnia to juvenile shad which have a higher energy density, subyearlings can partially compensate for the effects of higher water temperatures they experience in the lower Columbia River during summer. However, achieving positive growth as piscivores requires subyearlings to feed at

  10. Micro-Food Web Structure Shapes Rhizosphere Microbial Communities and Growth in Oak

    Directory of Open Access Journals (Sweden)

    Hazel R. Maboreke

    2018-03-01

    Full Text Available The multitrophic interactions in the rhizosphere impose significant impacts on microbial community structure and function, affecting nutrient mineralisation and consequently plant performance. However, particularly for long-lived plants such as forest trees, the mechanisms by which trophic structure of the micro-food web governs rhizosphere microorganisms are still poorly understood. This study addresses the role of nematodes, as a major component of the soil micro-food web, in influencing the microbial abundance and community structure as well as tree growth. In a greenhouse experiment with Pedunculate Oak seedlings were grown in soil, where the nematode trophic structure was manipulated by altering the proportion of functional groups (i.e., bacterial, fungal, and plant feeders in a full factorial design. The influence on the rhizosphere microbial community, the ectomycorrhizal symbiont Piloderma croceum, and oak growth, was assessed. Soil phospholipid fatty acids were employed to determine changes in the microbial communities. Increased density of singular nematode functional groups showed minor impact by increasing the biomass of single microbial groups (e.g., plant feeders that of Gram-negative bacteria, except fungal feeders, which resulted in a decline of all microorganisms in the soil. In contrast, inoculation of two or three nematode groups promoted microbial biomass and altered the community structure in favour of bacteria, thereby counteracting negative impact of single groups. These findings highlight that the collective action of trophic groups in the soil micro-food web can result in microbial community changes promoting the fitness of the tree, thereby alleviating the negative effects of individual functional groups.

  11. Method for solid state crystal growth

    Science.gov (United States)

    Nolas, George S.; Beekman, Matthew K.

    2013-04-09

    A novel method for high quality crystal growth of intermetallic clathrates is presented. The synthesis of high quality pure phase crystals has been complicated by the simultaneous formation of both clathrate type-I and clathrate type-II structures. It was found that selective, phase pure, single-crystal growth of type-I and type-II clathrates can be achieved by maintaining sufficient partial pressure of a chemical constituent during slow, controlled deprivation of the chemical constituent from the primary reactant. The chemical constituent is slowly removed from the primary reactant by the reaction of the chemical constituent vapor with a secondary reactant, spatially separated from the primary reactant, in a closed volume under uniaxial pressure and heat to form the single phase pure crystals.

  12. A fuzzy method for improving the functionality of search engines based on user's web interactions

    Directory of Open Access Journals (Sweden)

    Farzaneh Kabirbeyk

    2015-04-01

    Full Text Available Web mining has been widely used to discover knowledge from various sources in the web. One of the important tools in web mining is mining of web user’s behavior that is considered as a way to discover the potential knowledge of web user’s interaction. Nowadays, Website personalization is regarded as a popular phenomenon among web users and it plays an important role in facilitating user access and provides information of users’ requirements based on their own interests. Extracting important features about web user behavior plays a significant role in web usage mining. Such features are page visit frequency in each session, visit duration, and dates of visiting a certain pages. This paper presents a method to predict user’s interest and to propose a list of pages based on their interests by identifying user’s behavior based on fuzzy techniques called fuzzy clustering method. Due to the user’s different interests and use of one or more interest at a time, user’s interest may belong to several clusters and fuzzy clustering provide a possible overlap. Using the resulted cluster helps extract fuzzy rules. This helps detecting user’s movement pattern and using neural network a list of suggested pages to the users is provided.

  13. A Method to Ease the Deployment of Web Applications that Involve Database Systems A Method to Ease the Deployment of Web Applications that Involve Database Systems

    Directory of Open Access Journals (Sweden)

    Antonio Vega Corona

    2012-02-01

    Full Text Available El crecimiento continuo de la Internet ha permitido a las personas, alrededor de todo mundo, realizar transacciones en línea, buscar información o navegar usando el explorador de la Web. A medida que más gente se siente cómoda usando los exploradores de Web, más empresas productoras de software tratan de ofrecer interfaces Web como una forma alternativa para proporcionar acceso a sus aplicaciones. La naturaleza de la conexión Web y las restricciones impuestas por el ancho de banda disponible, hacen la integración de aplicaciones Web y los sistemas de bases de datos críticas. Debido a que las aplicaciones que usan bases de datos proporcionan una interfase gráfica para editar la información en la base de datos y debido a que cada columna en una tabla de una base de datos corresponde a un control en una interfase gráfica, el desarrollo de estas aplicaciones puede consumirun tiempo considerable, ya que la validación de campos y reglas de integridad referencial deben ser respetadas. Se propone un diseño orientado a objetos para así facilitar el desarrollo de aplicaciones que usan sistemas de bases de datos.The continuous growth of the Internet has driven people, all around the globe, to performtransactions on-line, search information or navigate using a browser. As more people feelcomfortable using a Web browser, more software companies are trying to alternatively offerWeb interfaces to provide access to their applications. The consequent nature of the Webconnection and the restrictions imposed by the available bandwidth make the successfulintegration of Web applications and database systems critical. Because popular databaseapplications provide a user interface to edit and maintain the information in the databaseand because each column in the database table maps to a graphic user interface control,the deployment of these applications can be time consuming; appropriate fi eld validationand referential integrity rules must be observed

  14. Web-based versus traditional lecture: are they equally effective as a flexible bronchoscopy teaching method?

    OpenAIRE

    Sterse Mata, Caio Augusto [UNIFESP; Ota, Luiz Hirotoshi [UNIFESP; Suzuki, Iunis [UNIFESP; Telles, Adriana [UNIFESP; Miotto, Andre [UNIFESP; Leao, Luiz Eduardo Villaca [UNIFESP

    2012-01-01

    This study compares the traditional live lecture to a web-based approach in the teaching of bronchoscopy and evaluates the positive and negative aspects of both methods. We developed a web-based bronchoscopy curriculum, which integrates texts, images and animations. It was applied to first-year interns, who were later administered a multiple-choice test. Another group of eight first-year interns received the traditional teaching method and the same test. the two groups were compared using the...

  15. Research on the Method of Enterprise Knowledge Management Based on Web 2.0

    Directory of Open Access Journals (Sweden)

    Le Chengyi

    2017-06-01

    Full Text Available [Purpose/significance] It is the key for the research of enterprise knowledge management to improve the efficiency of enterprise knowledge management by using the advantages of Web 2.0, such as its fastness, public participation and strong interaction. [Method/process] Based on the analysis of the characteristics and main technologies of Web 2.0, this paper discussed the role and application of Web 2.0 related technologies in the enterprise knowledge management, and then put forward the enterprise knowledge management methods based on Web 2.0, including knowledge acquisition method, knowledge classification and organization method, knowledge sharing and evaluation method by usingWeb2 .0. [Result/conclusion] Through the introduction of Web 2.0 related technologies into the knowledge management of enterprises, the research provides convenient and low-cost tools and methods for knowledge management related activities, and helps all users to participate in enterprise knowledge management activities quickly and easily.

  16. An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention

    OpenAIRE

    Alley, Stephanie; Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

    2016-01-01

    Background Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. Objective This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activ...

  17. Effects of Didymosphenia geminata massive growth on stream communities: Smaller organisms and simplified food web structure.

    Science.gov (United States)

    Ladrera, Rubén; Gomà, Joan; Prat, Narcís

    2018-01-01

    This study aims to contribute to the understanding of the impact of Didymosphenia geminata massive growths upon river ecosystem communities' composition and functioning. This is the first study to jointly consider the taxonomic composition and functional structure of diatom and macroinvertebrate assemblages in order to determine changes in community structure, and the food web alterations associated with this invasive alga. This study was carried out in the Lumbreras River (Ebro Basin, La Rioja, Northern Spain), which has been affected by a considerable massive growth of D. geminata since 2011. The study shows a profound alteration in both the river community composition and in the food web structure at the sites affected by the massive growth, which is primarily due to the alteration of the environmental conditions, thus demonstrating that D. geminata has an important role as an ecosystem engineer in the river. Thick filamentous mats impede the movement of large invertebrates-especially those that move and feed up on it-and favor small, opportunistic, herbivorous organisms, mainly chironomids, that are capable of moving between filaments and are aided by the absence of large trophic competitors and predators -prey release effect-. Only small predators, such as hydra, are capable of surviving in the new environment, as they are favored by the increase in chironomids, a source of food, and by the reduction in both their own predators and other midge predators -mesopredator release-. This change in the top-down control affects the diatom community, since chironomids may feed on large diatoms, increasing the proportion of small diatoms in the substrate. The survival of small and fast-growing pioneer diatoms is also favored by the mesh of filaments, which offers them a new habitat for colonization. Simultaneously, D. geminata causes a significant reduction in the number of diatoms with similar ecological requirements (those attached to the substrate). Overall, D

  18. Standard test method for measurement of web/roller friction characteristics

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method covers the simulation of a roller/web transport tribosystem and the measurement of the static and kinetic coefficient of friction of the web/roller couple when sliding occurs between the two. The objective of this test method is to provide users with web/roller friction information that can be used for process control, design calculations, and for any other function where web/roller friction needs to be known. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. A Novel Method for Live Debugging of Production Web Applications by Dynamic Resource Replacement

    OpenAIRE

    Khalid Al-Tahat; Khaled Zuhair Mahmoud; Ahmad Al-Mughrabi

    2014-01-01

    This paper proposes a novel methodology for enabling debugging and tracing of production web applications without affecting its normal flow and functionality. This method of debugging enables developers and maintenance engineers to replace a set of existing resources such as images, server side scripts, cascading style sheets with another set of resources per web session. The new resources will only be active in the debug session and other sessions will not be affected. T...

  20. System and Method for Providing Web-Based Remote Application Service

    OpenAIRE

    Shuen-Tai Wang; Yu-Ching Lin; Hsi-Ya Chang

    2017-01-01

    With the development of virtualization technologies, a new type of service named cloud computing service is produced. Cloud users usually encounter the problem of how to use the virtualized platform easily over the web without requiring the plug-in or installation of special software. The object of this paper is to develop a system and a method enabling process interfacing within an automation scenario for accessing remote application by using the web browser. To meet this challenge, we have ...

  1. Plant growth promoters and methods of using them

    KAUST Repository

    Al-Babili, Salim

    2017-01-01

    New plant growth regulators, including compounds and compositions, and methods of use including for promoting root growth. The compounds are carotenoid oxidation products, and a preferred example is 3-OH--β-apo-13-Carotenone. A method comprising

  2. Using artificial intelligence and web media data to evaluate the growth potential of companies in emerging industry sectors

    DEFF Research Database (Denmark)

    Tanev, Stoyan; Droll, Andrew; Khan, Shahzad

    2017-01-01

    In this article, we describe our efforts to adapt and validate a web search and analytics tool – the Gnowit Cognitive Insight Engine – to evaluate the growth and competitive potential of new technology startups and existing firms in the newly emerging precision medicine sector. The results are ba...

  3. A simple method for serving Web hypermaps with dynamic database drill-down

    Directory of Open Access Journals (Sweden)

    Carson Ewart R

    2002-08-01

    Full Text Available Abstract Background HealthCyberMap http://healthcybermap.semanticweb.org aims at mapping parts of health information cyberspace in novel ways to deliver a semantically superior user experience. This is achieved through "intelligent" categorisation and interactive hypermedia visualisation of health resources using metadata, clinical codes and GIS. HealthCyberMap is an ArcView 3.1 project. WebView, the Internet extension to ArcView, publishes HealthCyberMap ArcView Views as Web client-side imagemaps. The basic WebView set-up does not support any GIS database connection, and published Web maps become disconnected from the original project. A dedicated Internet map server would be the best way to serve HealthCyberMap database-driven interactive Web maps, but is an expensive and complex solution to acquire, run and maintain. This paper describes HealthCyberMap simple, low-cost method for "patching" WebView to serve hypermaps with dynamic database drill-down functionality on the Web. Results The proposed solution is currently used for publishing HealthCyberMap GIS-generated navigational information maps on the Web while maintaining their links with the underlying resource metadata base. Conclusion The authors believe their map serving approach as adopted in HealthCyberMap has been very successful, especially in cases when only map attribute data change without a corresponding effect on map appearance. It should be also possible to use the same solution to publish other interactive GIS-driven maps on the Web, e.g., maps of real world health problems.

  4. Method of Promoting Single Crystal Growth During Melt Growth of Semiconductors

    Science.gov (United States)

    Su, Ching-Hua (Inventor)

    2013-01-01

    The method of the invention promotes single crystal growth during fabrication of melt growth semiconductors. A growth ampoule and its tip have a semiconductor source material placed therein. The growth ampoule is placed in a first thermal environment that raises the temperature of the semiconductor source material to its liquidus temperature. The growth ampoule is then transitioned to a second thermal environment that causes the semiconductor source material in the growth ampoule's tip to attain a temperature that is below the semiconductor source material's solidus temperature. The growth ampoule so-transitioned is then mechanically perturbed to induce single crystal growth at the growth ampoule's tip.

  5. Crystal growth of emerald by flux method

    International Nuclear Information System (INIS)

    Inoue, Mikio; Narita, Eiichi; Okabe, Taijiro; Morishita, Toshihiko.

    1979-01-01

    Emerald crystals have been formed in two binary fluxes of Li 2 O-MoO 2 and Li 2 O-V 2 O 5 using the slow cooling method and the temperature gradient method under various conditions. In the flux of Li 2 O-MoO 3 carried out in the range of 2 -- 5 of molar ratios (MoO 3 /Li 2 O), emerald was crystallized in the temperature range from 750 to 950 0 C, and the suitable crystallization conditions were found to be the molar ratio of 3 -- 4 and the temperature about 900 0 C. In the flux of Li 2 O-V 2 O 5 carried out in the range of 1.7 -- 5 of molar ratios (V 2 O 5 /Li 2 O), emerald was crystallized in the temperature range from 900 to 1150 0 . The suitable crystals were obtained at the molar ratio of 3 and the temperature range of 1000 -- 1100 0 C. The crystallization temperature rised with an increase in the molar ratio of the both fluxes. The emeralds grown in two binary fluxes were transparent green, having the density of 2.68, the refractive index of 1.56, and the two distinct bands in the visible spectrum at 430 and 600nm. The emerald grown in Li 2 O-V 2 O 5 flux was more bluish green than that grown in Li 2 O-MoO 3 flux. The size of the spontaneously nucleated emerald grown in the former flux was larger than the latter, when crystallized by the slow cooling method. As for the solubility of beryl in the two fluxes, Li 2 O-V 2 O 5 flux was superior to Li 2 O-MoO 3 flux whose small solubility of SiO 2 caused an experimental problem to the temperature gradient method. The suitability of the two fluxes for the crystal growth of emerald by the flux method was discussed from the view point of various properties of above-mentioned two fluxes. (author)

  6. Building maps to search the web: the method Sewcom

    Directory of Open Access Journals (Sweden)

    Corrado Petrucco

    2002-01-01

    Full Text Available Seeking information on the Internet is becoming a necessity 'at school, at work and in every social sphere. Unfortunately the difficulties' inherent in the use of search engines and the use of unconscious cognitive approaches inefficient limit their effectiveness. It is in this respect presented a method, called SEWCOM that lets you create conceptual maps through interaction with search engines.

  7. Expert Advisor (EA) Evaluation System Using Web-based ELECTRE Method in Foreign Exchange (Forex) Market

    Science.gov (United States)

    Satibi; Widodo, Catur Edi; Farikhin

    2018-02-01

    This research aims to optimize forex trading profit automatically using EA but its still keep considering accuracy and drawdown levels. The evaluation system will classify EA performance based on trading market sessions (Sydney, Tokyo, London and New York) to determine the right EA to be used in certain market sessions. This evaluation system is a web-based ELECTRE methods that interact in real-time with EA through web service and are able to present real-time charts performance dashboard using web socket protocol communications. Web applications are programmed using NodeJs. In the testing period, all EAs had been simulated 24 hours in all market sessions for three months, the best EA is valued by its profit, accuracy and drawdown criteria that calculated using web-based ELECTRE method. The ideas of this research are to compare the best EA on testing period with collaboration performances of each best classified EA by market sessions. This research uses three months historical data of EUR/USD as testing period and other 3 months as validation period. As a result, performance of collaboration four best EA classified by market sessions can increase profits percentage consistently in testing and validation periods and keep securing accuracy and drawdown levels.

  8. Expert Advisor (EA Evaluation System Using Web-based ELECTRE Method in Foreign Exchange (Forex Market

    Directory of Open Access Journals (Sweden)

    Satibi Satibi

    2018-01-01

    Full Text Available This research aims to optimize forex trading profit automatically using EA but its still keep considering accuracy and drawdown levels. The evaluation system will classify EA performance based on trading market sessions (Sydney, Tokyo, London and New York to determine the right EA to be used in certain market sessions. This evaluation system is a web-based ELECTRE methods that interact in real-time with EA through web service and are able to present real-time charts performance dashboard using web socket protocol communications. Web applications are programmed using NodeJs. In the testing period, all EAs had been simulated 24 hours in all market sessions for three months, the best EA is valued by its profit, accuracy and drawdown criteria that calculated using web-based ELECTRE method. The ideas of this research are to compare the best EA on testing period with collaboration performances of each best classified EA by market sessions. This research uses three months historical data of EUR/USD as testing period and other 3 months as validation period. As a result, performance of collaboration four best EA classified by market sessions can increase profits percentage consistently in testing and validation periods and keep securing accuracy and drawdown levels.

  9. Using Artificial Intelligence and Web Media Data to Evaluate the Growth Potential of Companies in Emerging Industry Sectors

    Directory of Open Access Journals (Sweden)

    Andrew Droll

    2017-06-01

    Full Text Available In this article, we describe our efforts to adapt and validate a web search and analytics tool – the Gnowit Cognitive Insight Engine – to evaluate the growth and competitive potential of new technology startups and existing firms in the newly emerging precision medicine sector. The results are based on two different search ontologies and two different samples of firms. The first sample includes established drug companies operating in the precision medicine field and was used to estimate the relationship between the firms’ innovativeness and the extent of online discussions focusing on their potential growth. The second sample includes new technology firms in the same sector. The firms in the second sample were used as test cases to determine whether their growth-related web search scores would relate to the degree of their innovativeness. The second part of the study applied the same methodology to the real-time monitoring of the firms’ competitive actions. In our findings, we see that our methodology reveals a moderate degree of correlation between the Insight Engine’s algorithmically computed relevance scores and independent measures of innovation potential. The existence of such correlations invites future work in attempting to analyze company growth potential using techniques founded in web content scraping, natural language processing, and machine learning.

  10. WebMail versus WebApp: Comparing Problem-Based Learning Methods in a Business Research Methods Course

    Science.gov (United States)

    Williams van Rooij, Shahron

    2007-01-01

    This study examined the impact of two Problem-Based Learning (PBL) approaches on knowledge transfer, problem-solving self-efficacy, and perceived learning gains among four intact classes of adult learners engaged in a group project in an online undergraduate business research methods course. With two of the classes using a text-only PBL workbook…

  11. Direct strength method for web crippling—Lipped channels under EOF and IOF loading

    NARCIS (Netherlands)

    Heurkens, R.A.J.; Hofmeyer, H.; Mahendran, M.; Snijder, H.H.

    2018-01-01

    To apply the Direct Strength Method (DSM) to web crippling of lipped channel sections, experiments were recently conducted under EOF and IOF loading conditions. In the research presented here, finite element models were first developed to predict the elastic buckling loads and the elasto-plastic

  12. Spatial Visualization Learning in Engineering: Traditional Methods vs. a Web-Based Tool

    Science.gov (United States)

    Pedrosa, Carlos Melgosa; Barbero, Basilio Ramos; Miguel, Arturo Román

    2014-01-01

    This study compares an interactive learning manager for graphic engineering to develop spatial vision (ILMAGE_SV) to traditional methods. ILMAGE_SV is an asynchronous web-based learning tool that allows the manipulation of objects with a 3D viewer, self-evaluation, and continuous assessment. In addition, student learning may be monitored, which…

  13. Use of Web Technology and Active Learning Strategies in a Quality Assessment Methods Course.

    Science.gov (United States)

    Poirier, Therese I.; O'Neil, Christine K.

    2000-01-01

    The authors describe and evaluate quality assessment methods in a health care course that utilized web technology and various active learning strategies. The course was judged successful by student performance, evaluations and student assessments. The instructors were pleased with the outcomes achieved and the educational pedagogy used for this…

  14. Evaluation Methods for Assessing Users' Psychological Experiences of Web-Based Psychosocial Interventions: A Systematic Review.

    Science.gov (United States)

    Feather, Jacqueline Susan; Howson, Moira; Ritchie, Linda; Carter, Philip D; Parry, David Tudor; Koziol-McLain, Jane

    2016-06-30

    The use of Web-based interventions to deliver mental health and behavior change programs is increasingly popular. They are cost-effective, accessible, and generally effective. Often these interventions concern psychologically sensitive and challenging issues, such as depression or anxiety. The process by which a person receives and experiences therapy is important to understanding therapeutic process and outcomes. While the experience of the patient or client in traditional face-to-face therapy has been evaluated in a number of ways, there appeared to be a gap in the evaluation of patient experiences of therapeutic interventions delivered online. Evaluation of Web-based artifacts has focused either on evaluation of experience from a computer Web-design perspective through usability testing or on evaluation of treatment effectiveness. Neither of these methods focuses on the psychological experience of the person while engaged in the therapeutic process. This study aimed to investigate what methods, if any, have been used to evaluate the in situ psychological experience of users of Web-based self-help psychosocial interventions. A systematic literature review was undertaken of interdisciplinary databases with a focus on health and computer sciences. Studies that met a predetermined search protocol were included. Among 21 studies identified that examined psychological experience of the user, only 1 study collected user experience in situ. The most common method of understanding users' experience was through semistructured interviews conducted posttreatment or questionnaires administrated at the end of an intervention session. The questionnaires were usually based on standardized tools used to assess user experience with traditional face-to-face treatment. There is a lack of methods specified in the literature to evaluate the interface between Web-based mental health or behavior change artifacts and users. Main limitations in the research were the nascency of the topic

  15. ZOMG - I. How the cosmic web inhibits halo growth and generates assembly bias

    Science.gov (United States)

    Borzyszkowski, Mikolaj; Porciani, Cristiano; Romano-Díaz, Emilio; Garaldi, Enrico

    2017-07-01

    The clustering of dark matter haloes with fixed mass depends on their formation history, an effect known as assembly bias. We use zoom N-body simulations to investigate the origin of this phenomenon. For each halo at redshift z = 0, we determine the time in which the physical volume containing its final mass becomes stable. We consider five examples for which this happens at z ˜ 1.5 and two that do not stabilize by z = 0. The zoom simulations show that early-collapsing haloes do not grow in mass at z = 0 while late-forming ones show a net inflow. The reason is that 'accreting' haloes are located at the nodes of a network of thin filaments feeding them. Conversely, each 'stalled' halo lies within a prominent filament that is thicker than the halo size. Infalling material from the surroundings becomes part of the filament while matter within it recedes from the halo. We conclude that assembly bias originates from quenching halo growth due to tidal forces following the formation of non-linear structures in the cosmic web, as previously conjectured in the literature. Also the internal dynamics of the haloes change: the velocity anisotropy profile is biased towards radial (tangential) orbits in accreting (stalled) haloes. Our findings reveal the cause of the yet unexplained dependence of halo clustering on the anisotropy. Finally, we extend the excursion-set theory to account for these effects. A simple criterion based on the ellipticity of the linear tidal field combined with the spherical-collapse model provides excellent predictions for both classes of haloes.

  16. Growth of sphagnum: methods of measurement

    Energy Technology Data Exchange (ETDEWEB)

    Clymo, R S

    1970-01-01

    The results presented here show that the growth of sphagnum is at least comparable with other communities from the same area. It seems desirable to know more about the field microenvironment and about the response of the plants. It is not possible, for example, to account satisfactorily for such obvious features of bog topography as hummocks and pools.

  17. Bayesian methods to estimate urban growth potential

    Science.gov (United States)

    Smith, Jordan W.; Smart, Lindsey S.; Dorning, Monica; Dupéy, Lauren Nicole; Méley, Andréanne; Meentemeyer, Ross K.

    2017-01-01

    Urban growth often influences the production of ecosystem services. The impacts of urbanization on landscapes can subsequently affect landowners’ perceptions, values and decisions regarding their land. Within land-use and land-change research, very few models of dynamic landscape-scale processes like urbanization incorporate empirically-grounded landowner decision-making processes. Very little attention has focused on the heterogeneous decision-making processes that aggregate to influence broader-scale patterns of urbanization. We examine the land-use tradeoffs faced by individual landowners in one of the United States’ most rapidly urbanizing regions − the urban area surrounding Charlotte, North Carolina. We focus on the land-use decisions of non-industrial private forest owners located across the region’s development gradient. A discrete choice experiment is used to determine the critical factors influencing individual forest owners’ intent to sell their undeveloped properties across a series of experimentally varied scenarios of urban growth. Data are analyzed using a hierarchical Bayesian approach. The estimates derived from the survey data are used to modify a spatially-explicit trend-based urban development potential model, derived from remotely-sensed imagery and observed changes in the region’s socioeconomic and infrastructural characteristics between 2000 and 2011. This modeling approach combines the theoretical underpinnings of behavioral economics with spatiotemporal data describing a region’s historical development patterns. By integrating empirical social preference data into spatially-explicit urban growth models, we begin to more realistically capture processes as well as patterns that drive the location, magnitude and rates of urban growth.

  18. Web-based versus traditional lecture: are they equally effective as a flexible bronchoscopy teaching method?

    Science.gov (United States)

    Mata, Caio Augusto Sterse; Ota, Luiz Hirotoshi; Suzuki, Iunis; Telles, Adriana; Miotto, Andre; Leão, Luiz Eduardo Vilaça

    2012-01-01

    This study compares the traditional live lecture to a web-based approach in the teaching of bronchoscopy and evaluates the positive and negative aspects of both methods. We developed a web-based bronchoscopy curriculum, which integrates texts, images and animations. It was applied to first-year interns, who were later administered a multiple-choice test. Another group of eight first-year interns received the traditional teaching method and the same test. The two groups were compared using the Student's t-test. The mean scores (± SD) of students who used the website were 14.63 ± 1.41 (range 13-17). The test scores of the other group had the same range, with a mean score of 14.75 ± 1. The Student's t-test showed no difference between the test results. The common positive point noted was the presence of multimedia content. The web group cited as positive the ability to review the pages, and the other one the role of the teacher. Web-based bronchoscopy education showed results similar to the traditional live lecture in effectiveness.

  19. Web-enabled video-feedback: a method to reflect on the communication skills of experienced physicians.

    NARCIS (Netherlands)

    Noordman, J.; Verhaak, P.; Dulmen, S. van

    2011-01-01

    OBJECTIVE: To describe our web-enabled video-feedback method designed to reflect on the communication skills of experienced physicians. METHODS: Participating physicians (n=28) received a 'personal web link' to two of their video-recorded consultations. After watching the consultations physicians

  20. Social network extraction based on Web: 3. the integrated superficial method

    Science.gov (United States)

    Nasution, M. K. M.; Sitompul, O. S.; Noah, S. A.

    2018-03-01

    The Web as a source of information has become part of the social behavior information. Although, by involving only the limitation of information disclosed by search engines in the form of: hit counts, snippets, and URL addresses of web pages, the integrated extraction method produces a social network not only trusted but enriched. Unintegrated extraction methods may produce social networks without explanation, resulting in poor supplemental information, or resulting in a social network of durmise laden, consequently unrepresentative social structures. The integrated superficial method in addition to generating the core social network, also generates an expanded network so as to reach the scope of relation clues, or number of edges computationally almost similar to n(n - 1)/2 for n social actors.

  1. The Effect of Web-Based Teaching Method on Academic Achievement in Tourism Education

    Directory of Open Access Journals (Sweden)

    Bahadır Köksalan

    2011-12-01

    Full Text Available The purpose of this research was to determine the effects of web based teaching method on the academic achievement level of undergraduate students in Tourism Education department in the fall semester of 2009-2010 academic year. The research was carried out with 50 students (25 students in control group, 25 students in experimental group who were studying at Tourism and Travel Management; and Tourism and Hotel Management Programs in Tourism and Hotel Management Vocational High School at Gaziantep University. The research procedure included both pre-test/post-test and experimental-control group research models. While creating control and experimental groups, the researchers took into consideration neutrality, academic success, internet access, knowledge level of internet and computer use as well as of web based learning. The GTOI/SEYH 111 Communication Course was delivered both in webbased learning method and traditional face-to-face method. In the course, basic concepts, verbal-nonverbal communication, written communication with the communication issues were taught to experimental group with web-based teaching method and they were taught to control group with traditional methods (lecturing, question-answer, simulation

  2. A computed microtomography method for understanding epiphyseal growth plate fusion

    Science.gov (United States)

    Staines, Katherine A.; Madi, Kamel; Javaheri, Behzad; Lee, Peter D.; Pitsillides, Andrew A.

    2017-12-01

    The epiphyseal growth plate is a developmental region responsible for linear bone growth, in which chondrocytes undertake a tightly regulated series of biological processes. Concomitant with the cessation of growth and sexual maturation, the human growth plate undergoes progressive narrowing, and ultimately disappears. Despite the crucial role of this growth plate fusion ‘bridging’ event, the precise mechanisms by which it is governed are complex and yet to be established. Progress is likely hindered by the current methods for growth plate visualisation; these are invasive and largely rely on histological procedures. Here we describe our non-invasive method utilising synchrotron x-ray computed microtomography for the examination of growth plate bridging, which ultimately leads to its closure coincident with termination of further longitudinal bone growth. We then apply this method to a dataset obtained from a benchtop microcomputed tomography scanner to highlight its potential for wide usage. Furthermore, we conduct finite element modelling at the micron-scale to reveal the effects of growth plate bridging on local tissue mechanics. Employment of these 3D analyses of growth plate bone bridging is likely to advance our understanding of the physiological mechanisms that control growth plate fusion.

  3. Linking oceanic food webs to coastal production and growth rates of Pacific salmon ( Oncorhynchus spp.), using models on three scales

    Science.gov (United States)

    Aydin, Kerim Y.; McFarlane, Gordon A.; King, Jacquelynne R.; Megrey, Bernard A.; Myers, Katherine W.

    2005-03-01

    Three independent modeling methods—a nutrient-phytoplankton-zooplankton (NPZ) model (NEMURO), a food web model (Ecopath/Ecosim), and a bioenergetics model for pink salmon ( Oncorhynchus gorbuscha)—were linked to examine the relationship between seasonal zooplankton dynamics and annual food web productive potential for Pacific salmon feeding and growing in the Alaskan subarctic gyre ecosystem. The linked approach shows the importance of seasonal and ontogenetic prey switching for zooplanktivorous pink salmon, and illustrates the critical role played by lipid-rich forage species, especially the gonatid squid Berryteuthis anonychus, in connecting zooplankton to upper trophic level production in the subarctic North Pacific. The results highlight the need to uncover natural mechanisms responsible for accelerated late winter and early spring growth of salmon, especially with respect to climate change and zooplankton bloom timing. Our results indicate that the best match between modeled and observed high-seas pink salmon growth requires the inclusion of two factors into bioenergetics models: (1) decreasing energetic foraging costs for salmon as zooplankton are concentrated by the spring shallowing of pelagic mixed-layer depth and (2) the ontogenetic switch of salmon diets from zooplankton to squid. Finally, we varied the timing and input levels of coastal salmon production to examine effects of density-dependent coastal processes on ocean feeding; coastal processes that place relatively minor limitations on salmon growth may delay the seasonal timing of ontogenetic diet shifts and thus have a magnified effect on overall salmon growth rates.

  4. A Web text acquisition method%基于Delphi的Web文本获取方法

    Institute of Scientific and Technical Information of China (English)

    刘建培

    2016-01-01

    提出基于delphi的Web文本获取方法,从网页中获取Web页面格式的源文件(.html文件),分析它的结构信息,处理它的控制符,通过分析过滤源文件的格式来提取网页中的文本信息。利用标点符号对文本信息进行章节、段落、句子等预处理,将文本信息转换成句子序列,让用户快速地定位到需要了解的内容,从而让用户远离钓鱼网站、恶意广告、欺诈信息以及在浏览网页内容时产生的骚扰,提高互联网体验。%In this paper, a method of Web text acquisition with Delphi is proposed, which obtains the source files of the Web page format (.Html file) from the Web page, analyzes its structure information, deals with its control character, and extracts the text information from the Web page by analyzing and filtering the source files’ formats. The method makes use of punctuation marks to preprocess the text information for sections, paragraphs and sentences, converts the text information into sentence sequences, which allows the users to quickly navigate to the contents needed to know, allows the users to stay away from phishing sites, malicious advertising, fraud information and the harassment generated by browsing the content of Web pages, and improves their Internet experience.

  5. Comparison of test methods for mould growth in buildings

    DEFF Research Database (Denmark)

    Bonderup, Sirid; Gunnarsen, Lars Bo; Knudsen, Sofie Marie

    2016-01-01

    renovation needs. This is of importance when hidden surface testing would require destructive measures and subsequent renovation. After identifying available methods on the Danish market for assessing mould growth in dwellings, a case study was conducted to test the usefulness of the methods in four......The purpose of this work is to compare a range of test methods and kits for assessing whether a building structure is infested by mould fungi. A further purpose of this work is to evaluate whether air-based methods for sampling fungal emissions provide information qualifying decisions concerning...... methods measure different aspects relating to mould growth and vary in selectivity and precision. The two types of air samples indicated low levels of mould growth, even where the results of the other methods indicated high to moderate growth. With methods based on culture and DNA testing some differences...

  6. Standard test method for determination of surface lubrication on flexible webs

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method has been used since 1988 as an ANSI/ISO standard test for determination of lubrication on processed photographic films. Its purpose was to determine the presence of process-surviving lubricants on photographic films. It is the purpose of this test method to expand the applicability of this test method to other flexible webs that may need lubrication for suitable performance. This test measures the breakaway (static) coefficient of friction of a metal rider on the web by the inclined plane method. The objectives of the test is to determine if a web surface has a lubricant present or not. It is not intended to assign a friction coefficient to a material. It is not intended to rank lubricants. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish ...

  7. The effectiveness of web-based, multimedia tutorials for teaching methods of human body composition analysis.

    Science.gov (United States)

    Buzzell, Paul R; Chamberlain, Valerie M; Pintauro, Stephen J

    2002-12-01

    This study examined the effectiveness of a series of Web-based, multimedia tutorials on methods of human body composition analysis. Tutorials were developed around four body composition topics: hydrodensitometry (underwater weighing), dual-energy X-ray absorptiometry, bioelectrical impedance analysis, and total body electrical conductivity. Thirty-two students enrolled in the course were randomly assigned to learn the material through either the Web-based tutorials only ("Computer"), a traditional lecture format ("Lecture"), or lectures supplemented with Web-based tutorials ("Both"). All students were administered a validated pretest before randomization and an identical posttest at the completion of the course. The reliability of the test was 0.84. The mean score changes from pretest to posttest were not significantly different among the groups (65.4 plus minus 17.31, 78.82 plus minus 21.50, and 76 plus minus 21.22 for the Computer, Both, and Lecture groups, respectively). Additionally, a Likert-type assessment found equally positive attitudes toward all three formats. The results indicate that Web-based tutorials are as effective as the traditional lecture format for teaching these topics.

  8. Method and apparatus for ultrasonic characterization through the thickness direction of a moving web

    Science.gov (United States)

    Jackson, Theodore; Hall, Maclin S.

    2001-01-01

    A method and apparatus for determining the caliper and/or the ultrasonic transit time through the thickness direction of a moving web of material using ultrasonic pulses generated by a rotatable wheel ultrasound apparatus. The apparatus includes a first liquid-filled tire and either a second liquid-filled tire forming a nip or a rotatable cylinder that supports a thin moving web of material such as a moving web of paper and forms a nip with the first liquid-filled tire. The components of ultrasonic transit time through the tires and fluid held within the tires may be resolved and separately employed to determine the separate contributions of the two tire thicknesses and the two fluid paths to the total path length that lies between two ultrasonic transducer surfaces contained within the tires in support of caliper measurements. The present invention provides the benefit of obtaining a transit time and caliper measurement at any point in time as a specimen passes through the nip of rotating tires and eliminates inaccuracies arising from nonuniform tire circumferential thickness by accurately retaining point-to-point specimen transit time and caliper variation information, rather than an average obtained through one or more tire rotations. Morever, ultrasonic transit time through the thickness direction of a moving web may be determined independent of small variations in the wheel axle spacing, tire thickness, and liquid and tire temperatures.

  9. Re-assessing copepod growth using the Moult Rate method

    DEFF Research Database (Denmark)

    Hirst, Andrew G.; Keister, J. E.; Richardson, A. J.

    2014-01-01

    Estimating growth and production rates of mesozooplankton, and copepods in particular, is important in describing flows of material and energy though pelagic systems. Over the past 30 years, the Moult Rate (MR) method has been used to estimate juvenile copepod growth rates in ∼40 papers. Yet the MR......-moulting stage, e.g. copepodite stage 5 to adult. We performed experiments with Calanus pacificus to estimate growth of stage C5 using an alternative method. We found that the error size and sign varied between mass type (i.e. DW, C and N). Recommendations for practical future assessments of growth in copepods...

  10. An Invocation Cost Optimization Method for Web Services in Cloud Environment

    Directory of Open Access Journals (Sweden)

    Lianyong Qi

    2017-01-01

    Full Text Available The advent of cloud computing technology has enabled users to invoke various web services in a “pay-as-you-go” manner. However, due to the flexible pricing model of web services in cloud environment, a cloud user’ service invocation cost may be influenced by many factors (e.g., service invocation time, which brings a great challenge for cloud users’ cost-effective web service invocation. In view of this challenge, in this paper, we first investigate the multiple factors that influence the invocation cost of a cloud service, for example, user’s job size, service invocation time, and service quality level; and afterwards, a novel Cloud Service Cost Optimization Method named CS-COM is put forward, by considering the above multiple impact factors. Finally, a set of experiments are designed, deployed, and tested to validate the feasibility of our proposal in terms of cost optimization. The experiment results show that our proposed CS-COM method outperforms other related methods.

  11. A simple web-based tool to compare freshwater fish data collected using AFS standard methods

    Science.gov (United States)

    Bonar, Scott A.; Mercado-Silva, Norman; Rahr, Matt; Torrey, Yuta T.; Cate, Averill

    2016-01-01

    The American Fisheries Society (AFS) recently published Standard Methods for Sampling North American Freshwater Fishes. Enlisting the expertise of 284 scientists from 107 organizations throughout Canada, Mexico, and the United States, this text was developed to facilitate comparisons of fish data across regions or time. Here we describe a user-friendly web tool that automates among-sample comparisons in individual fish condition, population length-frequency distributions, and catch per unit effort (CPUE) data collected using AFS standard methods. Currently, the web tool (1) provides instantaneous summaries of almost 4,000 data sets of condition, length frequency, and CPUE of common freshwater fishes collected using standard gears in 43 states and provinces; (2) is easily appended with new standardized field data to update subsequent queries and summaries; (3) compares fish data from a particular water body with continent, ecoregion, and state data summaries; and (4) provides additional information about AFS standard fish sampling including benefits, ongoing validation studies, and opportunities to comment on specific methods. The web tool—programmed in a PHP-based Drupal framework—was supported by several AFS Sections, agencies, and universities and is freely available from the AFS website and fisheriesstandardsampling.org. With widespread use, the online tool could become an important resource for fisheries biologists.

  12. Evaluation Methods for Assessing Users’ Psychological Experiences of Web-Based Psychosocial Interventions: A Systematic Review

    Science.gov (United States)

    Howson, Moira; Ritchie, Linda; Carter, Philip D; Parry, David Tudor; Koziol-McLain, Jane

    2016-01-01

    Background The use of Web-based interventions to deliver mental health and behavior change programs is increasingly popular. They are cost-effective, accessible, and generally effective. Often these interventions concern psychologically sensitive and challenging issues, such as depression or anxiety. The process by which a person receives and experiences therapy is important to understanding therapeutic process and outcomes. While the experience of the patient or client in traditional face-to-face therapy has been evaluated in a number of ways, there appeared to be a gap in the evaluation of patient experiences of therapeutic interventions delivered online. Evaluation of Web-based artifacts has focused either on evaluation of experience from a computer Web-design perspective through usability testing or on evaluation of treatment effectiveness. Neither of these methods focuses on the psychological experience of the person while engaged in the therapeutic process. Objective This study aimed to investigate what methods, if any, have been used to evaluate the in situ psychological experience of users of Web-based self-help psychosocial interventions. Methods A systematic literature review was undertaken of interdisciplinary databases with a focus on health and computer sciences. Studies that met a predetermined search protocol were included. Results Among 21 studies identified that examined psychological experience of the user, only 1 study collected user experience in situ. The most common method of understanding users’ experience was through semistructured interviews conducted posttreatment or questionnaires administrated at the end of an intervention session. The questionnaires were usually based on standardized tools used to assess user experience with traditional face-to-face treatment. Conclusions There is a lack of methods specified in the literature to evaluate the interface between Web-based mental health or behavior change artifacts and users. Main

  13. Methods for measuring arctic and alpine shrub growth

    DEFF Research Database (Denmark)

    Myers-Smith, Isla; Hallinger, Martin; Blok, Daan

    2015-01-01

    Shrubs have increased in abundance and dominance in arctic and alpine regions in recent decades. This often dramatic change, likely due to climate warming, has the potential to alter both the structure and function of tundra ecosystems. The analysis of shrub growth is improving our understanding...... of tundra vegetation dynamics and environmental changes. However, dendrochronological methods developed for trees, need to be adapted for the morphology and growth eccentricity of shrubs. Here, we review current and developing methods to measure radial and axial growth, estimate age, and assess growth...... dynamics in relation to environmental variables. Recent advances in sampling methods, analysis and applications have improved our ability to investigate growth and recruitment dynamics of shrubs. However, to extrapolate findings to the biome scale, future dendroecologicalwork will require improved...

  14. Reliability and validity of Web-SPAN, a web-based method for assessing weight status, diet and physical activity in youth.

    Science.gov (United States)

    Storey, K E; McCargar, L J

    2012-02-01

    Web-based surveys are becoming increasing popular. The present study aimed to assess the reliability and validity of the Web-Survey of Physical Activity and Nutrition (Web-SPAN) for self-report of height and weight, diet and physical activity by youth. School children aged 11-15years (grades 7-9; n=459) participated in the school-based research (boys, n=225; girls, n=233; mean age, 12.8years). Students completed Web-SPAN (self-administered) twice and participated in on-site school assessments [height, weight, 3-day food/pedometer record, Physical Activity Questionnaire for Older Children (PAQ-C), shuttle run]. Intraclass (ICC) and Pearson's correlation coefficients and paired samples t-tests were used to assess the test-retest reliability of Web-SPAN and to compare Web-SPAN with the on-site assessments. Test-retest reliability for height (ICC=0.90), weight (ICC=0.98) and the PAQ-C (ICC=0.79) were highly correlated, whereas correlations for nutrients were not as strong (ICC=0.37-0.64). There were no differences between Web-SPAN times 1 and 2 for height and weight, although there were differences for the PAQ-C and most nutrients. Web-SPAN was strongly correlated with the on-site assessments, including height (ICC=0.88), weight (ICC=0.93) and the PAQ-C (ICC=0.70). Mean differences for height and the PAQ-C were not significant, whereas mean differences for weight were significant resulting in an underestimation of being overweight/obesity prevalence (84% agreement). Correlations for nutrients were in the range 0.24-0.40; mean differences were small but generally significantly different. Correlations were weak between the web-based PAQ-C and 3-day pedometer record (r=0.28) and 20-m shuttle run (r=0.28). Web-SPAN is a time- and cost-effective method that can be used to assess the diet and physical activity status of youth in large cross-sectional studies and to assess group trends (weight status). © 2011 The Authors. Journal of Human Nutrition and Dietetics © 2011 The

  15. Studying Cannabis Use Behaviors With Facebook and Web Surveys: Methods and Insights

    Science.gov (United States)

    2018-01-01

    The rapid and wide-reaching expansion of internet access and digital technologies offers epidemiologists numerous opportunities to study health behaviors. One particularly promising new data collection strategy is the use of Facebook’s advertising platform in conjunction with Web-based surveys. Our research team at the Center for Technology and Behavioral Health has used this quick and cost-efficient method to recruit large samples and address unique scientific questions related to cannabis use. In conducting this research, we have gleaned several insights for using this sampling method effectively and have begun to document the characteristics of the resulting data. We believe this information could be useful to other researchers attempting to study cannabis use or, potentially, other health behaviors. The first aim of this paper is to describe case examples of procedures for using Facebook as a survey sampling method for studying cannabis use. We then present several distinctive features of the data produced using this method. Finally, we discuss the utility of this sampling method for addressing specific types of epidemiological research questions. Overall, we believe that sampling with Facebook advertisements and Web surveys is best conceptualized as a targeted, nonprobability-based method for oversampling cannabis users across the United States. PMID:29720366

  16. Studying Cannabis Use Behaviors With Facebook and Web Surveys: Methods and Insights.

    Science.gov (United States)

    Borodovsky, Jacob T; Marsch, Lisa A; Budney, Alan J

    2018-05-02

    The rapid and wide-reaching expansion of internet access and digital technologies offers epidemiologists numerous opportunities to study health behaviors. One particularly promising new data collection strategy is the use of Facebook's advertising platform in conjunction with Web-based surveys. Our research team at the Center for Technology and Behavioral Health has used this quick and cost-efficient method to recruit large samples and address unique scientific questions related to cannabis use. In conducting this research, we have gleaned several insights for using this sampling method effectively and have begun to document the characteristics of the resulting data. We believe this information could be useful to other researchers attempting to study cannabis use or, potentially, other health behaviors. The first aim of this paper is to describe case examples of procedures for using Facebook as a survey sampling method for studying cannabis use. We then present several distinctive features of the data produced using this method. Finally, we discuss the utility of this sampling method for addressing specific types of epidemiological research questions. Overall, we believe that sampling with Facebook advertisements and Web surveys is best conceptualized as a targeted, nonprobability-based method for oversampling cannabis users across the United States. ©Jacob T Borodovsky, Lisa A Marsch, Alan J Budney. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 02.05.2018.

  17. of different weed control methods on Weed infestation, growth

    African Journals Online (AJOL)

    thinkexploitsint'l

    This weed control method also resulted in significantly better growth and ... proper management, it is possible to obtain 2,500 kg ha-1 (Onwueme and Sinha, 1991). ... however, time consuming, labour – intensive, strenuous and generally ...

  18. Silicon crystal growth using a liquid-feeding Czochralski method

    Science.gov (United States)

    Shiraishi, Yutaka; Kurosaka, Shoei; Imai, Masato

    1996-09-01

    Silicon single crystals with uniformity along the growth direction were grown using a new continuous Czochralski (CCZ) method. Polycrystalline silicon rods used as charge materials are melted by carbon heaters over a crucible without contact between the raw material and other substances. Using this method, silicon crystals with diameters as large as 6 or 8 inch and good uniformity along the growth direction were grown.

  19. Construction of the World Health Organization child growth standards: Selection of methods for attained growth curves

    NARCIS (Netherlands)

    Borghi, E.; Onis, M. de; Garza, C.; Broeck, J. van den; Frongillo, E.A.; Grummer-Strawn, L.; Buuren, S. van; Pan, H.; Molinari, L.; Martorell, R.; Onyango, A.W.; Martines, J.C.; Pinol, A.; Siyam, A.; Victoria, C.G.; Bhan, M.K.; Araújo, C.L.; Lartey, A.; Owusu, W.B.; Bhandari, N.; Norum, K.R.; Bjoerneboe, G.-E.Aa.; Mohamed, A.J.; Dewey, K.G.; Belbase, K.; Chumlea, C.; Cole, T.; Shrimpton, R.; Albernaz, E.; Tomasi, E.; Cássia Fossati da Silveira, R. de; Nader, G.; Sagoe-Moses, I.; Gomez, V.; Sagoe-Moses, C.; Taneja, S.; Rongsen, T.; Chetia, J.; Sharma, P.; Bahl, R.; Baerug, A.; Tufte, E.; Alasfoor, D.; Prakash, N.S.; Mabry, R.M.; Al Rajab, H.J.; Helmi, S.A.; Nommsen-Rivers, L.A.; Cohen, R.J.; Heinig, M.J.

    2006-01-01

    The World Health Organization (WHO), in collaboration with a number of research institutions worldwide, is developing new child growth standards. As part of a broad consultative process for selecting the best statistical methods, WHO convened a group of statisticians and child growth experts to

  20. Determining the signalling overhead of two common WebRTC methods:JSON via XMLHttpRequest and SIP over WebSocket

    CSIR Research Space (South Africa)

    Adeyeye, M

    2013-09-01

    Full Text Available Web Real-Time Communication (WebRTC) introduces real-time multimedia communication as native capabilities of Web browsers. With the adoption of WebRTC the Web browsers will be able to use WebRTC to communicate with one another (peer...

  1. Automated web usage data mining and recommendation system using K-Nearest Neighbor (KNN classification method

    Directory of Open Access Journals (Sweden)

    D.A. Adeniyi

    2016-01-01

    Full Text Available The major problem of many on-line web sites is the presentation of many choices to the client at a time; this usually results to strenuous and time consuming task in finding the right product or information on the site. In this work, we present a study of automatic web usage data mining and recommendation system based on current user behavior through his/her click stream data on the newly developed Really Simple Syndication (RSS reader website, in order to provide relevant information to the individual without explicitly asking for it. The K-Nearest-Neighbor (KNN classification method has been trained to be used on-line and in Real-Time to identify clients/visitors click stream data, matching it to a particular user group and recommend a tailored browsing option that meet the need of the specific user at a particular time. To achieve this, web users RSS address file was extracted, cleansed, formatted and grouped into meaningful session and data mart was developed. Our result shows that the K-Nearest Neighbor classifier is transparent, consistent, straightforward, simple to understand, high tendency to possess desirable qualities and easy to implement than most other machine learning techniques specifically when there is little or no prior knowledge about data distribution.

  2. Teachers' Attitudes Toward WebQuests as a Method of Teaching

    Science.gov (United States)

    Perkins, Robert; McKnight, Margaret L.

    2005-01-01

    One of the latest uses of technology gaining popular status in education is the WebQuest, a process that involves students using the World Wide Web to solve a problem. The goals of this project are to: (a) determine if teachers are using WebQuests in their classrooms; (b) ascertain whether teachers feel WebQuests are effective for teaching…

  3. Growth, biomass, and production of two small barbs (Barbus humilis and B. tanapelagius, Cyprinidae) and their role in the food web of Lake Tana (Ethiopia)

    NARCIS (Netherlands)

    Dejen, E.; Vijverberg, J.; Nagelkerke, L.A.J.; Sibbing, F.A.

    2009-01-01

    Growth, biomass and production of two small barbs (Barbus humilis and Barbus tanapelagius) and their role in the food web of Lake Tana were investigated. From length–frequency distribution of trawl monitoring surveys growth coefficient, F' values were estimated at 3.71–4.17 for B. humilis and

  4. Growth, biomass, and production of two small barbs (Barbus humilis and B. tanapelagius, Cyprinidae) and their role in the food web of Lake Tana (Ethiopia)

    NARCIS (Netherlands)

    Dejen, E.; Vijverberg, J.; Nagelkerke, L.A.J.; Sibbing, F.A.

    2009-01-01

    Growth, biomass and production of two small barbs (Barbus humilis and Barbus tanapelagius) and their role in the food web of Lake Tana were investigated. From length–frequency distribution of trawl monitoring surveys growth coefficient, Φ′ values were estimated at 3.71–4.17 for B. humilis and

  5. AN EFFICIENT METHOD FOR DEEP WEB CRAWLER BASED ON ACCURACY -A REVIEW

    OpenAIRE

    Pranali Zade1, Dr.S.W.Mohod2

    2018-01-01

    As deep web grows at a very fast pace, there has been increased interest in techniques that help efficiently locate deep-web interfaces. However, due to the large volume of web resources and the dynamic nature of deep web, achieving wide coverage and high efficiency is a challenging issue. We propose a three-stage framework, for efficient harvesting deep web interfaces. Project experimental results on a set of representative domains show the agility and accuracy of our proposed crawler framew...

  6. Aluminum-catalyzed silicon nanowires: Growth methods, properties, and applications

    Energy Technology Data Exchange (ETDEWEB)

    Hainey, Mel F.; Redwing, Joan M. [Department of Materials Science and Engineering, Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2016-12-15

    Metal-mediated vapor-liquid-solid (VLS) growth is a promising approach for the fabrication of silicon nanowires, although residual metal incorporation into the nanowires during growth can adversely impact electronic properties particularly when metals such as gold and copper are utilized. Aluminum, which acts as a shallow acceptor in silicon, is therefore of significant interest for the growth of p-type silicon nanowires but has presented challenges due to its propensity for oxidation. This paper summarizes the key aspects of aluminum-catalyzed nanowire growth along with wire properties and device results. In the first section, aluminum-catalyzed nanowire growth is discussed with a specific emphasis on methods to mitigate aluminum oxide formation. Next, the influence of growth parameters such as growth temperature, precursor partial pressure, and hydrogen partial pressure on nanowire morphology is discussed, followed by a brief review of the growth of templated and patterned arrays of nanowires. Aluminum incorporation into the nanowires is then discussed in detail, including measurements of the aluminum concentration within wires using atom probe tomography and assessment of electrical properties by four point resistance measurements. Finally, the use of aluminum-catalyzed VLS growth for device fabrication is reviewed including results on single-wire radial p-n junction solar cells and planar solar cells fabricated with nanowire/nanopyramid texturing.

  7. Informing web-based communication curricula in veterinary education: a systematic review of web-based methods used for teaching and assessing clinical communication in medical education.

    Science.gov (United States)

    Artemiou, Elpida; Adams, Cindy L; Toews, Lorraine; Violato, Claudio; Coe, Jason B

    2014-01-01

    We determined the Web-based configurations that are applied to teach medical and veterinary communication skills, evaluated their effectiveness, and suggested future educational directions for Web-based communication teaching in veterinary education. We performed a systematic search of CAB Abstracts, MEDLINE, Scopus, and ERIC limited to articles published in English between 2000 and 2012. The review focused on medical or veterinary undergraduate to clinical- or residency-level students. We selected studies for which the study population was randomized to the Web-based learning (WBL) intervention with a post-test comparison with another WBL or non-WBL method and that reported at least one empirical outcome. Two independent reviewers completed relevancy screening, data extraction, and synthesis of results using Kirkpatrick and Kirkpatrick's framework. The search retrieved 1,583 articles, and 10 met the final inclusion criteria. We identified no published articles on Web based communication platforms in veterinary medicine; however, publications summarized from human medicine demonstrated that WBL provides a potentially reliable and valid approach for teaching and assessing communication skills. Student feedback on the use of virtual patients for teaching clinical communication skills has been positive,though evidence has suggested that practice with virtual patients prompted lower relation-building responses.Empirical outcomes indicate that WBL is a viable method for expanding the approach to teaching history taking and possibly to additional tasks of the veterinary medical interview.

  8. An e-learning Programming Method And It's Implementation Based On Multimedia And Web

    International Nuclear Information System (INIS)

    Madenda, Sarifuddin; Tommy, F. R.

    2001-01-01

    New developments in information technology and telecommunication play an important rile in exchanging fast and accurate information which range from text, sound, graphic to video. These technologies seem to be very effective for Distance learning, Virtual University and E-learning. This paper presents an E-learning programming method and it's implementation based on multimedia and Web. An example of the study case corresponds to human organ, where the organ functions are presented as texts and sounds and the activities as graphic and video

  9. Advanced dendritic web growth development and development of single-crystal silicon dendritic ribbon and high-efficiency solar cell program

    Science.gov (United States)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.

    1986-01-01

    Efforts to demonstrate that the dendritic web technology is ready for commercial use by the end of 1986 continues. A commercial readiness goal involves improvements to crystal growth furnace throughput to demonstrate an area growth rate of greater than 15 sq cm/min while simultaneously growing 10 meters or more of ribbon under conditions of continuous melt replenishment. Continuous means that the silicon melt is being replenished at the same rate that it is being consumed by ribbon growth so that the melt level remains constant. Efforts continue on computer thermal modeling required to define high speed, low stress, continuous growth configurations; the study of convective effects in the molten silicon and growth furnace cover gas; on furnace component modifications; on web quality assessments; and on experimental growth activities.

  10. A semantics-based method for clustering of Chinese web search results

    Science.gov (United States)

    Zhang, Hui; Wang, Deqing; Wang, Li; Bi, Zhuming; Chen, Yong

    2014-01-01

    Information explosion is a critical challenge to the development of modern information systems. In particular, when the application of an information system is over the Internet, the amount of information over the web has been increasing exponentially and rapidly. Search engines, such as Google and Baidu, are essential tools for people to find the information from the Internet. Valuable information, however, is still likely submerged in the ocean of search results from those tools. By clustering the results into different groups based on subjects automatically, a search engine with the clustering feature allows users to select most relevant results quickly. In this paper, we propose an online semantics-based method to cluster Chinese web search results. First, we employ the generalised suffix tree to extract the longest common substrings (LCSs) from search snippets. Second, we use the HowNet to calculate the similarities of the words derived from the LCSs, and extract the most representative features by constructing the vocabulary chain. Third, we construct a vector of text features and calculate snippets' semantic similarities. Finally, we improve the Chameleon algorithm to cluster snippets. Extensive experimental results have shown that the proposed algorithm has outperformed over the suffix tree clustering method and other traditional clustering methods.

  11. Web usability evaluation on BloobIS website by using hallway usability testing method and ISO 9241:11

    Science.gov (United States)

    Dwi Susanto, Tony; Ingesti Prasetyo, Anisa; Astuti, Hanim Maria

    2018-03-01

    At this moment, the need for web as an information media is highly important. Not only confined in the infotainment area, government, and education, but health as well uses the web media as a medium for providing information effectively. BloobIS is a web based application which integrates blood supply and distribution information at the Blood Transfusion Unit. Knowing how easy information is on BloobIS is marked by how convenient the website is used. Up until now, the BloobIS website is nearing completion but testing has not yet been performed to users and is on the testing and development phase in the Development Life Cycle software. Thus, an evaluation namely the quality control software which focuses on the perspective of BloobIs web usability is required. Hallway Usability Testing and ISO 9241:11 are the methods chosen to measure the BloobIS application usability. The expected outputs of the quality control software focusing on the usability evaluation are being able to rectify the usability deficiencies on the BloobIs web and provide recommendations to develop the web as a basic BloobIS web quality upgraed which sets a goal to amplify the satisfaction of web users based on usability factors in ISO 9241:11.

  12. Continuum damage mechanics method for fatigue growth of surface cracks

    International Nuclear Information System (INIS)

    Feng Xiqiao; He Shuyan

    1997-01-01

    With the background of leak-before-break (LBB) analysis of pressurized vessels and pipes in nuclear plants, the fatigue growth problem of either circumferential or longitudinal semi-elliptical surface cracks subjected to cyclic loading is studied by using a continuum damage mechanics method. The fatigue damage is described by a scalar damage variable. From the damage evolution equation at the crack tip, a crack growth equation similar to famous Paris' formula is derived, which shows the physical meaning of Paris' formula. Thereby, a continuum damage mechanics approach is developed to analyze the configuration evolution of surface cracks during fatigue growth

  13. Web Applications Vulnerability Management using a Quantitative Stochastic Risk Modeling Method

    Directory of Open Access Journals (Sweden)

    Sergiu SECHEL

    2017-01-01

    Full Text Available The aim of this research is to propose a quantitative risk modeling method that reduces the guess work and uncertainty from the vulnerability and risk assessment activities of web based applications while providing users the flexibility to assess risk according to their risk appetite and tolerance with a high degree of assurance. The research method is based on the research done by the OWASP Foundation on this subject but their risk rating methodology needed de-bugging and updates in different in key areas that are presented in this paper. The modified risk modeling method uses Monte Carlo simulations to model risk characteristics that can’t be determined without guess work and it was tested in vulnerability assessment activities on real production systems and in theory by assigning discrete uniform assumptions to all risk charac-teristics (risk attributes and evaluate the results after 1.5 million rounds of Monte Carlo simu-lations.

  14. TECHNOLOGY AND METHODS OF CREATING WEB-BASED LEARNING ENVIRONMENT FOR HUMANITIES EDUCATION

    Directory of Open Access Journals (Sweden)

    Вилена Александровна Брылева

    2013-04-01

    Full Text Available The purpose of the article is to describe the structure of web environment in frames of new educational paradigm in teaching Humanities, to clarify the scientifical and practical importance of using Web 2.0 technologies in higher education. This problem is of great importance due to the necessity of integration of modern IT into educational environment which needs to develop new methods of teaching.The model of educational environment presented in the article is based on the integration of LMS Moodle and PLE Mahara. The authors define the functional modules and means of the environment, describe its didactic qualities, organization requirements and usage advantages. The methodic model of teaching English worked out by the authors supposes step-by-step formation of professional as well as informational competence necessary to any modern specialist. The effectiveness of the model is verified by experiental learning, based on individual and group forms of work on educational site of Institute of Philology and Intercultural Communication of Volgograd State university.DOI: http://dx.doi.org/10.12731/2218-7405-2013-2-8

  15. Materials and methods to increase plant growth and yield

    Science.gov (United States)

    Kirst, Matias

    2017-05-16

    The present invention relates to materials and methods for modulating growth rates, yield, and/or resistance to drought conditions in plants. In one embodiment, a method of the invention comprises increasing expression of an hc1 gene (or a homolog thereof that provides for substantially the same activity), or increasing expression or activity of the protein encoded by an hc1 gene thereof, in a plant, wherein expression of the hc1 gene or expression or activity of the protein encoded by an hc1 gene results in increased growth rate, yield, and/or drought resistance in the plant.

  16. Effect of Growth Parameters on SnO2 Nanowires Growth by Electron Beam Evaporation Method

    Science.gov (United States)

    Rakesh Kumar, R.; Manjula, Y.; Narasimha Rao, K.

    2018-02-01

    Tin oxide (SnO2) nanowires were synthesized via catalyst assisted VLS growth mechanism by the electron beam evaporation method at a growth temperature of 450 °C. The effects of growth parameters such as evaporation rate of Tin, catalyst film thickness, and different types of substrates on the growth of SnO2 nanowires were studied. Nanowires (NWs) growth was completely seized at higher tin evaporation rates due to the inability of the catalyst particle to initiate the NWs growth. Nanowires diameters were able to tune with catalyst film thickness. Nanowires growth was completely absent at higher catalyst film thickness due to agglomeration of the catalyst film. Optimum growth parameters for SnO2 NWs were presented. Nanocomposites such as Zinc oxide - SnO2, Graphene oxide sheets- SnO2 and Graphene nanosheets-SnO2 were able to synthesize at a lower substrate temperature of 450 °C. These nanocompsoites will be useful in enhancing the capacity of Li-ion batteries, the gas sensing response and also useful in increasing the photo catalytic activity.

  17. Web Based Cattle Disease Expert System Diagnosis with forward Chaining Method

    Science.gov (United States)

    Zamsuri, Ahmad; Syafitri, Wenni; Sadar, Muhamad

    2017-12-01

    Cattle is one of the livestock who have high economic potential, whether for livestock, cattle seed, or even for food stock. Everything that comes from Cattle is a treasure for example the Milk, the Meat, and Cattle-hide. The factor that cause Cattles to die is the spread of disease that could crock up the Cattle’s health. So that the Expert system is needed to utilize and analye the Cattle’s disease so it could detect the disease without going to the veterinarian. Forward chaining method is one of the correct method in this expert system wherein began with Symptoms to determine the illness. From this matter, we built a web based expert system application on Cattles disease to ease the disease detection and showing the brief information about the Cattles itself.

  18. Modeling error distributions of growth curve models through Bayesian methods.

    Science.gov (United States)

    Zhang, Zhiyong

    2016-06-01

    Growth curve models are widely used in social and behavioral sciences. However, typical growth curve models often assume that the errors are normally distributed although non-normal data may be even more common than normal data. In order to avoid possible statistical inference problems in blindly assuming normality, a general Bayesian framework is proposed to flexibly model normal and non-normal data through the explicit specification of the error distributions. A simulation study shows when the distribution of the error is correctly specified, one can avoid the loss in the efficiency of standard error estimates. A real example on the analysis of mathematical ability growth data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 is used to show the application of the proposed methods. Instructions and code on how to conduct growth curve analysis with both normal and non-normal error distributions using the the MCMC procedure of SAS are provided.

  19. A Formative Evaluation with Extension Educators: Exploring Implementation Approaches Using Web-based Methods

    Directory of Open Access Journals (Sweden)

    Adrienne M. Duke

    2017-10-01

    Full Text Available The article describes the formative evaluation of a bullying prevention program called Be SAFE from the perspective of Extension educators. Twelve regional and county educators from Family and Child Development and 4-H Youth Development participated in our study. We used a web-based, mixed methods approach, utilizing both Qualtrics, an online survey software platform, and Scopia, a video conferencing application, to collect survey data and do a focus group. The results of the survey show that three activities, Clear Mind, Mud Mind, Take a Stand, and The Relationship Continuum, were perceived as garnering the most participation from students. However, focus group data indicated that while there was often a high level of participation, the subject matter of the curriculum was too advanced for students in the fifth grade and that classroom size affected how well educators could teach lessons. Furthermore, school access was not an implementation challenge, but the amount of days available to implement the full curriculum was sometimes limited. The data collected through this formative evaluation were used to improve implementation efforts. The process outlined in this article can be used as a model to help program leaders who are interested in using web-based tools to evaluate implementation processes.

  20. Plant growth promoters and methods of using them

    KAUST Repository

    Al-Babili, Salim

    2017-01-05

    New plant growth regulators, including compounds and compositions, and methods of use including for promoting root growth. The compounds are carotenoid oxidation products, and a preferred example is 3-OH--β-apo-13-Carotenone. A method comprising promoting the growth of at least one plant with use of an effective amount of at least one composition comprising an effective amount of at least one compound which is represented by A-B-C, wherein B is a bivalent polyene moiety, A is a monovalent moiety linked to B by a six-membered carbon ring, wherein the ring has at least one substituent linked to the ring by an oxygen atom, and C is a monovalent moiety linked to B by a carbonyl group. Synergistic effects can be used with combinations of compounds.

  1. Synthesis of lithium niobate and monocrystal growth by Czochralski method

    International Nuclear Information System (INIS)

    Balzuweit, K.

    1988-01-01

    The qualitative analysis of lithium niobate by x-ray analysis and optical microscopy is presented. The lithium niobate compound was obtained by synthesis using niobium oxides and lithium carbonates. The lithium niobate monocrystal growth was done by Czochralski method. (M.C.K.)

  2. Developing a Web Platform to Support a Community of Practice: A Mixed Methods Study in Pediatric Physiotherapy.

    Science.gov (United States)

    Pratte, Gabrielle; Hurtubise, Karen; Rivard, Lisa; Berbari, Jade; Camden, Chantal

    2018-01-01

    Web platforms are increasingly used to support virtual interactions between members of communities of practice (CoP). However, little is known about how to develop these platforms to support the implementation of best practices for health care professionals. The aim of this article is to explore pediatric physiotherapists' (PTs) perspectives regarding the utility and usability of the characteristic of a web platform developed to support virtual communities of practice (vCoP). This study adopted an explanatory sequential mixed methods design. A web platform supporting the interactions of vCoP members was developed for PTs working with children with developmental coordination disorder. Specific strategies and features were created to support the effectiveness of the platform across three domains: social, information-quality, and system-quality factors. Quantitative data were collected from a cross-sectional survey (n = 41) after 5 months of access to the web platform. Descriptive statistics were calculated. Qualitative data were also collected from semistructured interviews (n = 9), which were coded, interpreted, and analyzed by using Boucher's Web Ergonomics Conceptual Framework. The utility of web platform characteristics targeting the three key domain factors were generally perceived positively by PTs. However, web platform usability issues were noted by PTs, including problems with navigation and information retrieval. Web platform aiming to support vCoP should be carefully developed to target potential users' needs. Whenever possible, users should co-construct the web platform with vCoP developers. Moreover, each of the developed characteristics (eg, newsletter, search function) should be evaluated in terms of utility and usability for the users.

  3. A crack growth evaluation method for interacting multiple cracks

    International Nuclear Information System (INIS)

    Kamaya, Masayuki

    2003-01-01

    When stress corrosion cracking or corrosion fatigue occurs, multiple cracks are frequently initiated in the same area. According to section XI of the ASME Boiler and Pressure Vessel Code, multiple cracks are considered as a single combined crack in crack growth analysis, if the specified conditions are satisfied. In crack growth processes, however, no prescription for the interference between multiple cracks is given in this code. The JSME Post-Construction Code, issued in May 2000, prescribes the conditions of crack coalescence in the crack growth process. This study aimed to extend this prescription to more general cases. A simulation model was applied, to simulate the crack growth process, taking into account the interference between two cracks. This model made it possible to analyze multiple crack growth behaviors for many cases (e.g. different relative position and length) that could not be studied by experiment only. Based on these analyses, a new crack growth analysis method was suggested for taking into account the interference between multiple cracks. (author)

  4. Adjusting the general growth balance method for migration

    OpenAIRE

    Hill, Kenneth; Queiroz, Bernardo

    2010-01-01

    Death distribution methods proposed for death registration coverage by comparison with census age distributions assume no net migration. This assumption makes it problematic to apply these methods to sub-national and national populations affected by substantial net migration. In this paper, we propose and explore a two-step process in which the Growth Balance Equation is first used to estimate net migration rates, using a model of age-specific migration, and then it is used to compare the obs...

  5. Standard test method for creep-fatigue crack growth testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of creep-fatigue crack growth properties of nominally homogeneous materials by use of pre-cracked compact type, C(T), test specimens subjected to uniaxial cyclic forces. It concerns fatigue cycling with sufficiently long loading/unloading rates or hold-times, or both, to cause creep deformation at the crack tip and the creep deformation be responsible for enhanced crack growth per loading cycle. It is intended as a guide for creep-fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. Therefore, this method requires testing of at least two specimens that yield overlapping crack growth rate data. The cyclic conditions responsible for creep-fatigue deformation and enhanced crack growth vary with material and with temperature for a given material. The effects of environment such as time-dependent oxidation in enhancing the crack growth ra...

  6. Online Recruitment Methods for Web-Based and Mobile Health Studies: A Review of the Literature.

    Science.gov (United States)

    Lane, Taylor S; Armin, Julie; Gordon, Judith S

    2015-07-22

    Internet and mobile health (mHealth) apps hold promise for expanding the reach of evidence-based health interventions. Research in this area is rapidly expanding. However, these studies may experience problems with recruitment and retention. Web-based and mHealth studies are in need of a wide-reaching and low-cost method of recruitment that will also effectively retain participants for the duration of the study. Online recruitment may be a low-cost and wide-reaching tool in comparison to traditional recruitment methods, although empirical evidence is limited. This study aims to review the literature on online recruitment for, and retention in, mHealth studies. We conducted a review of the literature of studies examining online recruitment methods as a viable means of obtaining mHealth research participants. The data sources used were PubMed, CINAHL, EbscoHost, PyscINFO, and MEDLINE. Studies reporting at least one method of online recruitment were included. A narrative approach enabled the authors to discuss the variability in recruitment results, as well as in recruitment duration and study design. From 550 initial publications, 12 studies were included in this review. The studies reported multiple uses and outcomes for online recruitment methods. Web-based recruitment was the only type of recruitment used in 67% (8/12) of the studies. Online recruitment was used for studies with a variety of health domains: smoking cessation (58%; 7/12) and mental health (17%; 2/12) being the most common. Recruitment duration lasted under a year in 67% (8/12) of the studies, with an average of 5 months spent on recruiting. In those studies that spent over a year (33%; 4/12), an average of 17 months was spent on recruiting. A little less than half (42%; 5/12) of the studies found Facebook ads or newsfeed posts to be an effective method of recruitment, a quarter (25%; 3/12) of the studies found Google ads to be the most effective way to reach participants, and one study showed

  7. Web-based Survey Data Collection With Peer Support and Advocacy Organizations: Implications of Participatory Methods.

    Science.gov (United States)

    Ostrow, Laysha; Penney, Darby; Stuart, Elizabeth; Leaf, Phillip J

    2017-01-01

    The 2012 National Survey of Peer-Run Organizations is one of the first to survey a nationally representative sample of mental health peer-run organizations, nonprofit venues for support and advocacy which are defined by people with psychiatric histories being in positions of authority and control. This paper describes data collection methods and demonstrates how participatory strategies to involve people with psychiatric histories intersected with Internet research to achieve study aims. People with psychiatric histories were involved in designing and implementing a web-based survey to collect data on peer-run organizations' operations and views on national policy. Participatory approaches were used throughout design, data collection analysis, and dissemination. The extensive involvement of people with psychiatric histories in project design and implementation were important strategies that contributed to this study's success.

  8. An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention

    Science.gov (United States)

    Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

    2016-01-01

    Background Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. Objective This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activity intervention. Methods A range of print-based (newspaper advertisements, newspaper articles, letterboxing, leaflets, and posters) and Web-based (Facebook advertisements, Google AdWords, and community calendars) methods were applied to attract participants to a Web-based physical activity intervention in Australia. The time investment, cost, number of first time website visits, the number of completed sign-up questionnaires, and the demographics of participants were recorded for each advertising method. Results A total of 278 people signed up to participate in the physical activity program. Of the print-based methods, newspaper advertisements totaled AUD $145, letterboxing AUD $135, leaflets AUD $66, posters AUD $52, and newspaper article AUD $3 per sign-up. Of the Web-based methods, Google AdWords totaled AUD $495, non-targeted Facebook advertisements AUD $68, targeted Facebook advertisements AUD $42, and community calendars AUD $12 per sign-up. Although the newspaper article and community calendars cost the least per sign-up, they resulted in only 17 and 6 sign-ups respectively. The targeted Facebook advertisements were the next most cost-effective method and reached a large number of sign-ups (n=184). The newspaper article and the targeted Facebook advertisements required the lowest time investment per sign-up (5 and 7 minutes respectively). People reached through the targeted Facebook advertisements were on average older (60 years vs 50 years, PFacebook advertising is the

  9. Verification of the fulfilment of the purposes of Basel II, Pillar 3 through application of the web log mining methods

    Directory of Open Access Journals (Sweden)

    M. Munk

    2012-01-01

    Full Text Available The objective of the paper is the verification of the fulfilment of the purposes of Basel II, Pillar 3 – market discipline during the recent financial crisis. The objective of the paper is to describe the current state of the working out of the project that is focused on the analysis of the market participants’ interest in mandatory disclosure of financial information by a commercial bank by means of advanced methods of web log mining. The output of the realized project will be the verification of the assumptions related to the purposes of Basel III by means of the web mining methods, the recommendations for possible reduction of mandatory disclosure of information under Basel II and III, the proposal of the methodology for data preparation for web log mining in this application domain and the generalised procedure for users’ behaviour modelling dependent on time. The schedule of the project has been divided into three phases. The paper deals with its first phase that is focusing on the data pre-processing, analysis and evaluation of the required information under Basel II, Pillar 3 since 2008 and its disclosure into the web site of a commercial bank. The authors introduce the methodologies for data preparation and known heuristic methods for path completion into web log files with respect to the particularity of investigated application domain. They propose scientific methods for modelling users’ behaviour of the webpages related to Pillar 3 with respect to time.

  10. An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention.

    Science.gov (United States)

    Alley, Stephanie; Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

    2016-05-27

    Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activity intervention. A range of print-based (newspaper advertisements, newspaper articles, letterboxing, leaflets, and posters) and Web-based (Facebook advertisements, Google AdWords, and community calendars) methods were applied to attract participants to a Web-based physical activity intervention in Australia. The time investment, cost, number of first time website visits, the number of completed sign-up questionnaires, and the demographics of participants were recorded for each advertising method. A total of 278 people signed up to participate in the physical activity program. Of the print-based methods, newspaper advertisements totaled AUD $145, letterboxing AUD $135, leaflets AUD $66, posters AUD $52, and newspaper article AUD $3 per sign-up. Of the Web-based methods, Google AdWords totaled AUD $495, non-targeted Facebook advertisements AUD $68, targeted Facebook advertisements AUD $42, and community calendars AUD $12 per sign-up. Although the newspaper article and community calendars cost the least per sign-up, they resulted in only 17 and 6 sign-ups respectively. The targeted Facebook advertisements were the next most cost-effective method and reached a large number of sign-ups (n=184). The newspaper article and the targeted Facebook advertisements required the lowest time investment per sign-up (5 and 7 minutes respectively). People reached through the targeted Facebook advertisements were on average older (60 years vs 50 years, Padvertising is the most cost-effective and efficient method at

  11. Principles of crystallization, and methods of single crystal growth

    International Nuclear Information System (INIS)

    Chacra, T.

    2010-01-01

    Most of single crystals (monocrystals), have distinguished optical, electrical, or magnetic properties, which make from single crystals, key elements in most of technical modern devices, as they may be used as lenses, Prisms, or grating sin optical devises, or Filters in X-Ray and spectrographic devices, or conductors and semiconductors in electronic, and computer industries. Furthermore, Single crystals are used in transducer devices. Moreover, they are indispensable elements in Laser and Maser emission technology.Crystal Growth Technology (CGT), has started, and developed in the international Universities and scientific institutions, aiming at some of single crystals, which may have significant properties and industrial applications, that can attract the attention of international crystal growth centers, to adopt the industrial production and marketing of such crystals. Unfortunately, Arab universities generally, and Syrian universities specifically, do not give even the minimum interest, to this field of Science.The purpose of this work is to attract the attention of Crystallographers, Physicists and Chemists in the Arab universities and research centers to the importance of crystal growth, and to work on, in the first stage to establish simple, uncomplicated laboratories for the growth of single crystal. Such laboratories can be supplied with equipment, which are partly available or can be manufactured in the local market. Many references (Articles, Papers, Diagrams, etc..) has been studied, to conclude the most important theoretical principles of Phase transitions,especially of crystallization. The conclusions of this study, are summarized in three Principles; Thermodynamic-, Morphologic-, and Kinetic-Principles. The study is completed by a brief description of the main single crystal growth methods with sketches, of equipment used in each method, which can be considered as primary designs for the equipment, of a new crystal growth laboratory. (author)

  12. Growth of large patterned arrays of neurons using plasma methods

    International Nuclear Information System (INIS)

    Brown, I G; Bjornstad, K A; Blakely, E A; Galvin, J E; Monteiro, O R; Sangyuenyongpipat, S

    2003-01-01

    To understand how large systems of neurons communicate, we need to develop, among other things, methods for growing patterned networks of large numbers of neurons. Success with this challenge will be important to our understanding of how the brain works, as well as to the development of novel kinds of computer architecture that may parallel the organization of the brain. We have investigated the use of metal ion implantation using a vacuum-arc ion source, and plasma deposition with a filtered vacuum-arc system, as a means of forming regions of selective neuronal attachment on surfaces. Lithographic patterns created by the treating surface with ion species that enhance or inhibit neuronal cell attachment allow subsequent proliferation and/or differentiation of the neurons to form desired patterned neural arrays. In the work described here, we used glass microscope slides as substrates, and some of the experiments made use of simple masks to form patterns of ion beam or plasma deposition treated regions. PC-12 rat neurons were then cultured on the treated substrates coated with Type I Collagen, and the growth and differentiation was monitored. Particularly good selective growth was obtained using plasma deposition of diamond-like carbon films of about one hundred Angstroms thickness. Neuron proliferation and the elaboration of dendrites and axons after the addition of nerve growth factor both showed excellent contrast, with prolific growth and differentiation on the treated surfaces and very low growth on the untreated surfaces

  13. Growth of large patterned arrays of neurons using plasma methods

    Energy Technology Data Exchange (ETDEWEB)

    Brown, I G; Bjornstad, K A; Blakely, E A; Galvin, J E; Monteiro, O R; Sangyuenyongpipat, S [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

    2003-05-01

    To understand how large systems of neurons communicate, we need to develop, among other things, methods for growing patterned networks of large numbers of neurons. Success with this challenge will be important to our understanding of how the brain works, as well as to the development of novel kinds of computer architecture that may parallel the organization of the brain. We have investigated the use of metal ion implantation using a vacuum-arc ion source, and plasma deposition with a filtered vacuum-arc system, as a means of forming regions of selective neuronal attachment on surfaces. Lithographic patterns created by the treating surface with ion species that enhance or inhibit neuronal cell attachment allow subsequent proliferation and/or differentiation of the neurons to form desired patterned neural arrays. In the work described here, we used glass microscope slides as substrates, and some of the experiments made use of simple masks to form patterns of ion beam or plasma deposition treated regions. PC-12 rat neurons were then cultured on the treated substrates coated with Type I Collagen, and the growth and differentiation was monitored. Particularly good selective growth was obtained using plasma deposition of diamond-like carbon films of about one hundred Angstroms thickness. Neuron proliferation and the elaboration of dendrites and axons after the addition of nerve growth factor both showed excellent contrast, with prolific growth and differentiation on the treated surfaces and very low growth on the untreated surfaces.

  14. Developing a Healthy Web-Based Cookbook for Pediatric Cancer Patients and Survivors: Rationale and Methods

    Science.gov (United States)

    Raber, Margaret

    2015-01-01

    Background Obesity has been a growing problem among children and adolescents in the United States for a number of decades. Childhood cancer survivors (CCS) are more susceptible to the downstream health consequences of obesity such as cardiovascular disease, endocrine issues, and risk of cancer recurrence due to late effects of treatment and suboptimal dietary and physical activity habits. Objective The objective of this study was to document the development of a Web-based cookbook of healthy recipes and nutrition resources to help enable pediatric cancer patients and survivors to lead healthier lifestyles. Methods The Web-based cookbook, named “@TheTable”, was created by a committee of researchers, a registered dietitian, patients and family members, a hospital chef, and community advisors and donors. Recipes were collected from several sources including recipe contests and social media. We incorporated advice from current patients, parents, and CCS. Results Over 400 recipes, searchable by several categories and with accompanying nutritional information, are currently available on the website. In addition to healthy recipes, social media functionality and cooking videos are integrated into the website. The website also features nutrition information resources including nutrition and cooking tip sheets available on several subjects. Conclusions The “@TheTable” website is a unique resource for promoting healthy lifestyles spanning pediatric oncology prevention, treatment, and survivorship. Through evaluations of the website’s current and future use, as well as incorporation into interventions designed to promote energy balance, we will continue to adapt and build this unique resource to serve cancer patients, survivors, and the general public. PMID:25840596

  15. A review of Web information seeking research: considerations of method and foci of interest

    Directory of Open Access Journals (Sweden)

    Konstantina Martzoukou

    2005-01-01

    Full Text Available Introduction. This review shows that Web information seeking research suffers from inconsistencies in method and a lack of homogeneity in research foci. Background. Qualitative and quantitative methods are needed to produce a comprehensive view of information seeking. Studies also recommend observation as one of the most fundamental ways of gaining direct knowledge of behaviour. User-centred research emphasises the importance of holistic approaches, which incorporate physical, cognitive, and affective elements. Problems. Comprehensive studies are limited; many approaches are problematic and a consistent methodological framework has not been developed. Research has often failed to ensure appropriate samples that ensure both quantitative validity and qualitative consistency. Typically, observation has been based on simulated rather than real information needs and most studies show little attempt to examine holistically different characteristics of users in the same research schema. Research also deals with various aspects of cognitive style and ability with variant definitions of expertise and different layers of user experience. Finally the effect of social and cultural elements has not been extensively investigated. Conclusion. The existing limitations in method and the plethora of different approaches allow little progress and fewer comparisons across studies. There is urgent need for establishing a theoretical framework on which future studies can be based so that information seeking behaviour can be more holistically understood, and results can be generalised.

  16. Material and method for promoting the growth of anaerobic bacteria

    Science.gov (United States)

    Adler, Howard I.

    1984-01-01

    A material and method for promoting the growth of anaerobic bacteria which includes a nutrient media containing a hydrogen donor and sterile membrane fragments of bacteria having an electron transfer system which reduces oxygen to water. Dissolved oxygen in the medium is removed by adding the sterile membrane fragments to the nutrient medium and holding the medium at a temperature of about 10.degree. to about 60.degree. C. until the dissolved oxygen is removed.

  17. Method and system of measuring ultrasonic signals in the plane of a moving web

    Science.gov (United States)

    Hall, Maclin S.; Jackson, Theodore G.; Wink, Wilmer A.; Knerr, Christopher

    1996-01-01

    An improved system for measuring the velocity of ultrasonic signals within the plane of moving web-like materials, such as paper, paperboard and the like. In addition to velocity measurements of ultrasonic signals in the plane of the web in the machine direction, MD, and a cross direction, CD, generally perpendicular to the direction of the traveling web, therefor, one embodiment of the system in accordance with the present invention is also adapted to provide on-line indication of the polar specific stiffness of the moving web. In another embodiment of the invention, the velocity of ultrasonic signals in the plane of the web are measured by way of a plurality of ultrasonic transducers carried by synchronously driven wheels or cylinders, thus eliminating undue transducer wear due to any speed differences between the transducers and the web. In order to provide relatively constant contact force between the transducers and the webs, the transducers are mounted in a sensor housings which include a spring for biasing the transducer radially outwardly. The sensor housings are adapted to be easily and conveniently mounted to the carrier to provide a relatively constant contact force between the transducers and the moving web.

  18. Comparison of elution efficiency of 99Mo/99mTc generator using theoretical and a free web based software method

    International Nuclear Information System (INIS)

    Kiran Kumar, J.K.; Sharma, S.; Chakraborty, D.; Singh, B.; Bhattacharaya, A.; Mittal, B.R.; Gayana, S.

    2010-01-01

    Full text: Generator is constructed on the principle of decay growth relationship between a long lived parent radionuclide and short lived daughter radionuclide. Difference in chemical properties of daughter and parent radionuclide helps in efficient separation of the two radionuclides. Aim and Objectives: The present study was designed to calculate the elution efficiency of the generator using the traditional formula based method and free web based software method. Materials and Methods: 99 Mo/ 99m Tc MON.TEK (Monrol, Gebze) generator and sterile 0.9% NaCl vial and vacuum vial in the lead shield were used for the elution. A new 99 Mo/ 99m Tc generator (calibrated activity 30GBq) calibrated for thursday was received on monday morning in our department. Generator was placed behind lead bricks in fume hood. The rubber plugs of both vacuum and 0.9% NaCl vial were wiped with 70% isopropyl alcohol swabs. Vacuum vial placed inside the lead shield was inserted in the vacuum position simultaneously 10 ml NaCl vial was inserted in the second slot. After 1-2 min vacuum vial was removed without moving the emptied 0.9%NaCl vial. The vacuum slot was covered with another sterile vial to maintain sterility. The RAC was measured in the calibrated dose calibrator (Capintec, 15 CRC). The elution efficiency was calculated theoretically and using free web based software (Apache Web server (www.apache.org) and PHP (www.php.net). Web site of the Italian Association of Nuclear Medicine and Molecular Imaging (www.aimn.it). Results: The mean elution efficiency calculated by theoretical method was 93.95% +0.61. The mean elution efficiency as calculated by the software was 92.85% + 0.89. There was no statistical difference in both the methods. Conclusion: The free web based software provides precise and reproducible results and thus saves time and mathematical calculation steps. This enables a rational use of available activity and also enabling a selection of the type and number of

  19. Case-Based Web Learning Versus Face-to-Face Learning: A Mixed-Method Study on University Nursing Students.

    Science.gov (United States)

    Chan, Aileen Wai-Kiu; Chair, Sek-Ying; Sit, Janet Wing-Hung; Wong, Eliza Mi-Ling; Lee, Diana Tze-Fun; Fung, Olivia Wai-Man

    2016-03-01

    Case-based learning (CBL) is an effective educational method for improving the learning and clinical reasoning skills of students. Advances in e-learning technology have supported the development of the Web-based CBL approach to teaching as an alternative or supplement to the traditional classroom approach. This study aims to examine the CBL experience of Hong Kong students using both traditional classroom and Web-based approaches in undergraduate nursing education. This experience is examined in terms of the perceived self-learning ability, clinical reasoning ability, and satisfaction in learning of these students. A mixture of quantitative and qualitative approaches was adopted. All Year-3 undergraduate nursing students were recruited. CBL was conducted using the traditional classroom approach in Semester 1, and the Web-based approach was conducted in Semester 2. Student evaluations were collected at the end of each semester using a self-report questionnaire. In-depth, focus-group interviews were conducted at the end of Semester 2. One hundred twenty-two students returned their questionnaires. No difference between the face-to-face and Web-based approaches was found in terms of self-learning ability (p = .947), clinical reasoning ability (p = .721), and satisfaction (p = .083). Focus group interview findings complemented survey findings and revealed five themes that reflected the CBL learning experience of Hong Kong students. These themes were (a) the structure of CBL, (b) the learning environment of Web-based CBL, (c) critical thinking and problem solving, (d) cultural influence on CBL learning experience, and (e) student-centered and teacher-centered learning. The Web-based CBL approach was comparable but not superior to the traditional classroom CBL approach. The Web-based CBL experience of these students sheds light on the impact of Chinese culture on student learning behavior and preferences.

  20. Silicon Crystal Growth by the Electromagnetic Czochralski (EMCZ) Method

    Science.gov (United States)

    Watanabe, Masahito; Eguchi, Minoru; Hibiya, Taketoshi

    1999-01-01

    A new method for growing silicon crystals by using electromagnetic force to rotate the melt without crucible rotation has been developed. We call it electromagnetic Czochralski (EMCZ) growth. An electromagnetic force in the azimuthal direction is generated in the melt by the interaction between an electric current (I) through the melt in the radial direction and a vertical magnetic field (B). The rotation rate (ωm) of the silicon melt is continuously changed from 0 to over 105 rpm under I = 0 to 8 A and B = 0 to 0.1 T. Thirty-mm-diameter silicon single crystals free of dislocations could be grown under two conditions: I = 2.0 A and B = 0.05 T (ωm = 105 rpm); and I =0.2 A and B = 0.1 T (ωm = 15 rpm). The oxygen concentration in the crystals was 8 ×1017 atoms/cm3 for the high rotation rate and 1×1017 atoms/cm3 for the low rotation rate. The oxygen-concentration distributions in the radial direction in both crystals were more homogeneous than those in the crystals grown by conventional CZ and/or MCZ growth. This new crystal-growth method can be easily adopted for growing large-diameter silicon crystals.

  1. Web Caching

    Indian Academy of Sciences (India)

    leveraged through Web caching technology. Specifically, Web caching becomes an ... Web routing can improve the overall performance of the Internet. Web caching is similar to memory system caching - a Web cache stores Web resources in ...

  2. Three-dimensional Reconstruction of Scar Contracture-bearing Axilla and Digital Webs Using the Square Flap Method

    Directory of Open Access Journals (Sweden)

    Chenyu Huang, MD, PhD

    2014-05-01

    Conclusions: When used to treat joint scar contractures, the square flap method can fully span the web space in a stereometric manner, thus yielding a close-to-original shape and function. Compared with the classical Z-plasties, it also provides sufficient anatomical blood supply while imposing the least physiological tension on the adjacent skin.

  3. Effects of Learning Style and Training Method on Computer Attitude and Performance in World Wide Web Page Design Training.

    Science.gov (United States)

    Chou, Huey-Wen; Wang, Yu-Fang

    1999-01-01

    Compares the effects of two training methods on computer attitude and performance in a World Wide Web page design program in a field experiment with high school students in Taiwan. Discusses individual differences, Kolb's Experiential Learning Theory and Learning Style Inventory, Computer Attitude Scale, and results of statistical analyses.…

  4. Assessment of Web-Based Authentication Methods in the U.S.: Comparing E-Learning Systems to Internet Healthcare Information Systems

    Science.gov (United States)

    Mattord, Herbert J.

    2012-01-01

    Organizations continue to rely on password-based authentication methods to control access to many Web-based systems. This research study developed a benchmarking instrument intended to assess authentication methods used in Web-based information systems (IS). It developed an Authentication Method System Index (AMSI) to analyze collected data from…

  5. Focused Crawling of the Deep Web Using Service Class Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Rocco, D; Liu, L; Critchlow, T

    2004-06-21

    Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

  6. An Invocation Cost Optimization Method for Web Services in Cloud Environment

    OpenAIRE

    Qi, Lianyong; Yu, Jiguo; Zhou, Zhili

    2017-01-01

    The advent of cloud computing technology has enabled users to invoke various web services in a “pay-as-you-go” manner. However, due to the flexible pricing model of web services in cloud environment, a cloud user’ service invocation cost may be influenced by many factors (e.g., service invocation time), which brings a great challenge for cloud users’ cost-effective web service invocation. In view of this challenge, in this paper, we first investigate the multiple factors that influence the in...

  7. Web-conferencing as a viable method for group decision research

    Directory of Open Access Journals (Sweden)

    Michel J. J. Handgraaf

    2012-09-01

    Full Text Available Studying group decision-making is challenging for multiple reasons. An important logistic difficulty is studying a sufficiently large number of groups, each with multiple participants. Assembling groups online could make this process easier and also provide access to group members more representative of real-world work groups than the sample of college students that typically comprise lab Face-to-Face (FtF groups. The main goal of this paper is to compare the decisions of online groups to those of FtF groups. We did so in a study that manipulated gain/loss framing of a risky decision between groups and examined the decisions of both individual group members and groups. All of these dependent measures are compared for an online and an FtF sample. Our results suggest that web-conferencing can be a substitute for FtF interaction in group decision-making research, as we found no moderation effects of communication medium on individual or group decision outcome variables. The effects of medium that were found suggest that the use of online groups may be the preferred method for group research. To wit, discussions among the online groups were shorter, but generated a greater number of thought units, i.e., they made more efficient use of time.

  8. Semantic Web status model

    CSIR Research Space (South Africa)

    Gerber, AJ

    2006-06-01

    Full Text Available Semantic Web application areas are experiencing intensified interest due to the rapid growth in the use of the Web, together with the innovation and renovation of information content technologies. The Semantic Web is regarded as an integrator across...

  9. Quality assurance of nursing web sites: development and implications of the ALEU method.

    Science.gov (United States)

    Cambil-Martín, Jacobo; Flynn, Maria; Villaverde-Gutiérrez, Carmen

    2011-09-01

    This article presents a study that evaluated the physical accessibility, readability, and usability of Spanish nursing Web sites and discusses the quality assurance issues raised, which are relevant to the wider nursing community. The Internet is recognized as an important source of health information for both nurses and the general public. Although it makes health-related information universally available, the wide variation in the overall quality of health Web sites is problematic. This raises many questions for the nursing profession: about what constitutes a good-quality Web site, about the nature of the information that nurses are finding and using to support their professional education, research, and clinical practice, and about the impact that Internet information ultimately has on health interactions and nursing care. The process of completing this small study showed that it is possible to usefully assess dimensions of Web site quality and suggested that it may be feasible to develop tools to help nurses evaluate national and international nursing Web sites. More research is needed to understand how nurses use the Internet to support their everyday professional practices, but the development and application of international Web site quality assurance tools may be important for maintaining professional nursing standards in the Internet age.

  10. Methods of assessing grain-size distribution during grain growth

    DEFF Research Database (Denmark)

    Tweed, Cherry J.; Hansen, Niels; Ralph, Brian

    1985-01-01

    This paper considers methods of obtaining grain-size distributions and ways of describing them. In order to collect statistically useful amounts of data, an automatic image analyzer is used, and the resulting data are subjected to a series of tests that evaluate the differences between two related...... distributions (before and after grain growth). The distributions are measured from two-dimensional sections, and both the data and the corresponding true three-dimensional grain-size distributions (obtained by stereological analysis) are collected. The techniques described here are illustrated by reference...

  11. Enhancement web proxy cache performance using Wrapper Feature Selection methods with NB and J48

    Science.gov (United States)

    Mahmoud Al-Qudah, Dua'a.; Funke Olanrewaju, Rashidah; Wong Azman, Amelia

    2017-11-01

    Web proxy cache technique reduces response time by storing a copy of pages between client and server sides. If requested pages are cached in the proxy, there is no need to access the server. Due to the limited size and excessive cost of cache compared to the other storages, cache replacement algorithm is used to determine evict page when the cache is full. On the other hand, the conventional algorithms for replacement such as Least Recently Use (LRU), First in First Out (FIFO), Least Frequently Use (LFU), Randomized Policy etc. may discard important pages just before use. Furthermore, using conventional algorithm cannot be well optimized since it requires some decision to intelligently evict a page before replacement. Hence, most researchers propose an integration among intelligent classifiers and replacement algorithm to improves replacement algorithms performance. This research proposes using automated wrapper feature selection methods to choose the best subset of features that are relevant and influence classifiers prediction accuracy. The result present that using wrapper feature selection methods namely: Best First (BFS), Incremental Wrapper subset selection(IWSS)embedded NB and particle swarm optimization(PSO)reduce number of features and have a good impact on reducing computation time. Using PSO enhance NB classifier accuracy by 1.1%, 0.43% and 0.22% over using NB with all features, using BFS and using IWSS embedded NB respectively. PSO rises J48 accuracy by 0.03%, 1.91 and 0.04% over using J48 classifier with all features, using IWSS-embedded NB and using BFS respectively. While using IWSS embedded NB fastest NB and J48 classifiers much more than BFS and PSO. However, it reduces computation time of NB by 0.1383 and reduce computation time of J48 by 2.998.

  12. Comparison Of Keyword Based Clustering Of Web Documents By Using Openstack 4j And By Traditional Method

    Directory of Open Access Journals (Sweden)

    Shiza Anand

    2015-08-01

    Full Text Available As the number of hypertext documents are increasing continuously day by day on world wide web. Therefore clustering methods will be required to bind documents into the clusters repositories according to the similarity lying between the documents. Various clustering methods exist such as Hierarchical Based K-means Fuzzy Logic Based Centroid Based etc. These keyword based clustering methods takes much more amount of time for creating containers and putting documents in their respective containers. These traditional methods use File Handling techniques of different programming languages for creating repositories and transferring web documents into these containers. In contrast openstack4j SDK is a new technique for creating containers and shifting web documents into these containers according to the similarity in much more less amount of time as compared to the traditional methods. Another benefit of this technique is that this SDK understands and reads all types of files such as jpg html pdf doc etc. This paper compares the time required for clustering of documents by using openstack4j and by traditional methods and suggests various search engines to adopt this technique for clustering so that they give result to the user querries in less amount of time.

  13. Standard test method for measurement of fatigue crack growth rates

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    1.1 This test method covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability. Results are expressed in terms of the crack-tip stress-intensity factor range (ΔK), defined by the theory of linear elasticity. 1.2 Several different test procedures are provided, the optimum test procedure being primarily dependent on the magnitude of the fatigue crack growth rate to be measured. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength so long as specimens are of sufficient thickness to preclude buckling and of sufficient planar size to remain predominantly elastic during testing. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size is variable to be adjusted for yield strength and applied force. Specimen thickness may be varied independent of planar size. 1.5 The details of the various specimens and test configurations are shown in Annex A1-Annex A3. Specimen configurations other than t...

  14. Web document clustering using hyperlink structures

    Energy Technology Data Exchange (ETDEWEB)

    He, Xiaofeng; Zha, Hongyuan; Ding, Chris H.Q; Simon, Horst D.

    2001-05-07

    With the exponential growth of information on the World Wide Web there is great demand for developing efficient and effective methods for organizing and retrieving the information available. Document clustering plays an important role in information retrieval and taxonomy management for the World Wide Web and remains an interesting and challenging problem in the field of web computing. In this paper we consider document clustering methods exploring textual information hyperlink structure and co-citation relations. In particular we apply the normalized cut clustering method developed in computer vision to the task of hyperdocument clustering. We also explore some theoretical connections of the normalized-cut method to K-means method. We then experiment with normalized-cut method in the context of clustering query result sets for web search engines.

  15. Web-based surveys as an alternative to traditional mail methods.

    Science.gov (United States)

    Fleming, Christopher M; Bowden, Mark

    2009-01-01

    Environmental economists have long used surveys to gather information about people's preferences. A recent innovation in survey methodology has been the advent of web-based surveys. While the Internet appears to offer a promising alternative to conventional survey administration modes, concerns exist over potential sampling biases associated with web-based surveys and the effect these may have on valuation estimates. This paper compares results obtained from a travel cost questionnaire of visitors to Fraser Island, Australia, that was conducted using two alternate survey administration modes; conventional mail and web-based. It is found that response rates and the socio-demographic make-up of respondents to the two survey modes are not statistically different. Moreover, both modes yield similar consumer surplus estimates.

  16. Accidental Discovery of Information on the User-Defined Social Web: A Mixed-Method Study

    Science.gov (United States)

    Lu, Chi-Jung

    2012-01-01

    Frequently interacting with other people or working in an information-rich environment can foster the "accidental discovery of information" (ADI) (Erdelez, 2000; McCay-Peet & Toms, 2010). With the increasing adoption of social web technologies, online user-participation communities and user-generated content have provided users the…

  17. Methods to obtain referral criteria in growth monitoring

    NARCIS (Netherlands)

    Van Dommelen, Paula; Van Buuren, Stef

    An important goal of growth monitoring is to identify genetic disorders, diseases or other conditions that manifest themselves through an abnormal growth. The two main conditions that can be detected by height monitoring are Turner's syndrome and growth hormone deficiency. Conditions or risk factors

  18. The Promise of Technology to Confront Dilemmas in Teacher Education: The Use of WebQuests in Problem-Based Methods Courses

    Science.gov (United States)

    Smith, Leigh K.; Draper, Roni Jo; Sabey, Brenda L.

    2005-01-01

    This qualitative study examined the use of WebQuests as a teaching tool in problem-based elementary methods courses. We explored the potential of WebQuests to address three dilemmas faced in teacher education: (a) modeling instruction that is based on current learning theory and research-based practices, (b) providing preservice teachers with…

  19. Methods for improved growth of group III nitride buffer layers

    Science.gov (United States)

    Melnik, Yurity; Chen, Lu; Kojiri, Hidehiro

    2014-07-15

    Methods are disclosed for growing high crystal quality group III-nitride epitaxial layers with advanced multiple buffer layer techniques. In an embodiment, a method includes forming group III-nitride buffer layers that contain aluminum on suitable substrate in a processing chamber of a hydride vapor phase epitaxy processing system. A hydrogen halide or halogen gas is flowing into the growth zone during deposition of buffer layers to suppress homogeneous particle formation. Some combinations of low temperature buffers that contain aluminum (e.g., AlN, AlGaN) and high temperature buffers that contain aluminum (e.g., AlN, AlGaN) may be used to improve crystal quality and morphology of subsequently grown group III-nitride epitaxial layers. The buffer may be deposited on the substrate, or on the surface of another buffer. The additional buffer layers may be added as interlayers in group III-nitride layers (e.g., GaN, AlGaN, AlN).

  20. To Study and Explain the Different Methods to Built a Secure Web Application

    OpenAIRE

    Parveen Kumar

    2012-01-01

    The secure web application is the most important thing for any type of transaction or similar things. Information security should enable, to the extent possible, a business to take the risks it is prepared to take on, by designing and deploying countermeasuresthat allow for sensible business risk. Additionally, seemingly small exposures should be dealt with if there is a business case. The role of the security architecture is not to steer the business away from risk, but rather to educate the...

  1. Methods and Systems for Representing, Using and Displaying Time-Varying Information on the Semantic Web

    Science.gov (United States)

    2013-11-26

    Datatype , including an xsd:dateTime datatype , an xsd:date datatype and/or a xsd: gYear datatype . The instructions include instructions for controlling a...can underlie most Semantic Web efforts. While implementation of the start and stop properties can include various known protocols or datatypes for...providing and communicating such properties among resources and applications, the use of standardized protocols, properties, and datatypes can be

  2. WEB STRUCTURE MINING

    Directory of Open Access Journals (Sweden)

    CLAUDIA ELENA DINUCĂ

    2011-01-01

    Full Text Available The World Wide Web became one of the most valuable resources for information retrievals and knowledge discoveries due to the permanent increasing of the amount of data available online. Taking into consideration the web dimension, the users get easily lost in the web’s rich hyper structure. Application of data mining methods is the right solution for knowledge discovery on the Web. The knowledge extracted from the Web can be used to raise the performances for Web information retrievals, question answering and Web based data warehousing. In this paper, I provide an introduction of Web mining categories and I focus on one of these categories: the Web structure mining. Web structure mining, one of three categories of web mining for data, is a tool used to identify the relationship between Web pages linked by information or direct link connection. It offers information about how different pages are linked together to form this huge web. Web Structure Mining finds hidden basic structures and uses hyperlinks for more web applications such as web search.

  3. Growth of uranyl hydroxide nanowires and nanotubes with electrodeposition method

    International Nuclear Information System (INIS)

    Wang Lin; Yuan Liyong; Chai Zhifang; Shi Weiqun

    2013-01-01

    Actinides nanomaterials have great potential applications in fabrication of novel nuclear fuel and spent fuel reprocessing in advanced nuclear energy system. However, the relative research so far still lacks systematic investigation on the synthetic methods for actinides nanomaterials. In this work, we use track-etched membranes as hard templates to synthesize uranium based nanomaterials with novel structures by electrodeposition method. Through electrochemical behavior investigations and subsequent product characterizations such as energy dispersive spectrometer (EDS), fourier transform infrared spectroscopy (FTIR), the chemical composition of deposition products have been confirmed as the uranyl hydroxide. More importantly, accurate control of morphology and structures (nanowires and nanotubes) could be achieved by carefully adjusting the growth parameters such as deposition time and deposition current density. It was found that the preferred morphology of electrodeposition products is nanowire when a low current density was applied, whereas nanotubes could be formed only under conditions of high current density and the short deposition time. The mechanism for the formation of nanowires in track-etched membranes is based on the precipitation of uranyl hydroxide from uranyl nitrate solution, according to the previous researches about obtaining nanostructures of hydroxides from nitrate salt solutions. And we have concluded that the formation of nanotubes is attributed to the hydrogen bubbles generated by water electrolysis under the condition of over-potential electro-reduction. The conveying of hydrogen bubbles plays the role of dynamic template which can prevent the complete filling of uranyl hydroxide in the channels. Additionally, we transform the chemical composition of deposition products from uranyl hydroxide to triuranium octoxide by calcining them at 500 and 800 degree centigrade, respectively, and SEM results show the morphologies of nanowires and

  4. Applications of web produced by hot air assisted melt differential electrospinning method

    International Nuclear Information System (INIS)

    Bubakir, Mahmoud M; Li, Haoyi; Wu, Weifeng; Li, Xiaohu; Ma, Shuai; Yang, Weimin

    2014-01-01

    Melt electrospinning, a technique that has gained increasing attention since it easily can generate continuous ultrafine fibers directly from polymer melts without the use of any solvent. Therefore, it is considered as a safe, cost effective, and environmental friendly technique. However, with all those great advantages, the technique still suffers some drawbacks such as: large fiber diameter and low throughput. The hot air assisted melt differential electrospinning (MDES) is a new technique invented by our research team that can solve or eliminate those drawbacks. The most important features of our used apparatus are: Needleless nozzle that could generate multiple Taylor cones around the bottom edge of the nozzle, which can result in a high throughput. The stretching force acting on the jets can be further strengthened by an air current provided by an air pressure gun. Interference between the high voltage supply and temperature sensors could be prevented through the grounding of the nozzle. The ultrafine pp webs produced using the same apparatus was in the micro/nano scale with a diameter of 600nm-6um and a smooth surface. Porosity of the webs ranges from 86.5%-99.4% when different collecting devices are used. The resultant ultrafine webs were applied in three areas: oil sorption, water treatment, and hydrophilic PP membrane. The results were very promising as for oil the sorption capacity was 129.0g/g; for water treatment, the rejection rate for 3um particles was 95%. And for the hydrophilic PP membrane, the water sorption capacity was 12.3 g/g

  5. Developing a healthy web-based cookbook for pediatric cancer patients and survivors: rationale and methods.

    Science.gov (United States)

    Li, Rhea; Raber, Margaret; Chandra, Joya

    2015-03-31

    Obesity has been a growing problem among children and adolescents in the United States for a number of decades. Childhood cancer survivors (CCS) are more susceptible to the downstream health consequences of obesity such as cardiovascular disease, endocrine issues, and risk of cancer recurrence due to late effects of treatment and suboptimal dietary and physical activity habits. The objective of this study was to document the development of a Web-based cookbook of healthy recipes and nutrition resources to help enable pediatric cancer patients and survivors to lead healthier lifestyles. The Web-based cookbook, named "@TheTable", was created by a committee of researchers, a registered dietitian, patients and family members, a hospital chef, and community advisors and donors. Recipes were collected from several sources including recipe contests and social media. We incorporated advice from current patients, parents, and CCS. Over 400 recipes, searchable by several categories and with accompanying nutritional information, are currently available on the website. In addition to healthy recipes, social media functionality and cooking videos are integrated into the website. The website also features nutrition information resources including nutrition and cooking tip sheets available on several subjects. The "@TheTable" website is a unique resource for promoting healthy lifestyles spanning pediatric oncology prevention, treatment, and survivorship. Through evaluations of the website's current and future use, as well as incorporation into interventions designed to promote energy balance, we will continue to adapt and build this unique resource to serve cancer patients, survivors, and the general public.

  6. A comparative study of software adaptation using remote method call and Web Services

    Directory of Open Access Journals (Sweden)

    AFFONSO, F. J.

    2011-06-01

    Full Text Available The software development process has been directed, over the years, to various methodologies with specific purposes to attend emerging needs. Besides, it can also be noticed, during this period, that some processes require mechanisms related to software reuse and greater speed in the development stage. An important factor in this context is the mutation (adaptation, which occurs in all the software's life cycle, due to its customers' needs or due to technological changes. Regarding the latter factor, it has been observed a significant increase in developments that use distributed applications through the World Wide Web or remote application. Based on the adaptation idea and on the necessity of software distribution systems, this paper presents a technique to reconfigure software capable of acting in several developmental contexts (local, distributed and/or Web. In order to demonstrate its applicability, a case study, through the use of service orientation and remote calls, was done to show the software adaptation in the development of applications. Besides, comparative results among the approaches used in the development of reconfigurable applications are also presented.

  7. Developing a Tile-Based Rendering Method to Improve Rendering Speed of 3D Geospatial Data with HTML5 and WebGL

    Directory of Open Access Journals (Sweden)

    Seokchan Kang

    2017-01-01

    Full Text Available A dedicated plug-in has been installed to visualize three-dimensional (3D city modeling spatial data in web-based applications. However, plug-in methods are gradually becoming obsolete, owing to their limited performance with respect to installation errors, unsupported cross-browsers, and security vulnerability. Particularly, in 2015, the NPAPI service was terminated in most existing web browsers except Internet Explorer. To overcome these problems, the HTML5/WebGL (next-generation web standard, confirmed in October 2014 technology emerged. In particular, WebGL is able to display 3D spatial data without plug-ins in browsers. In this study, we attempted to identify the requirements and limitations of displaying 3D city modeling spatial data using HTML5/WebGL, and we propose alternative ways based on the bin-packing algorithm that aggregates individual 3D city modeling data including buildings in tile units. The proposed method reduces the operational complexity and the number and volume of transmissions required for rendering processing to improve the speed of 3D data rendering. The proposed method was validated on real data for evaluating its effectiveness in 3D visualization of city modeling data in web-based applications.

  8. Simplified method of computation for fatigue crack growth

    International Nuclear Information System (INIS)

    Stahlberg, R.

    1978-01-01

    A procedure is described for drastically reducing the computation time in calculating crack growth for variable-amplitude fatigue loading when the loading sequence is periodic. By the proposed procedure, the crack growth, r, per loading is approximated as a smooth function and its reciprocal is integrated, rather than summing crack growth cycle by cycle. The savings in computation time results since only a few pointwise values of r must be computed to generate an accurate interpolation function for numerical integration. Further time savings can be achieved by selecting the stress intensity coefficient (stress intensity divided by load) as the argument of r. Once r has been obtained as a function of stress intensity coefficient for a given material, environment, and loading sequence, it applies to any configuration of cracked structure. (orig.) [de

  9. SequenceCEROSENE: a computational method and web server to visualize spatial residue neighborhoods at the sequence level.

    Science.gov (United States)

    Heinke, Florian; Bittrich, Sebastian; Kaiser, Florian; Labudde, Dirk

    2016-01-01

    To understand the molecular function of biopolymers, studying their structural characteristics is of central importance. Graphics programs are often utilized to conceive these properties, but with the increasing number of available structures in databases or structure models produced by automated modeling frameworks this process requires assistance from tools that allow automated structure visualization. In this paper a web server and its underlying method for generating graphical sequence representations of molecular structures is presented. The method, called SequenceCEROSENE (color encoding of residues obtained by spatial neighborhood embedding), retrieves the sequence of each amino acid or nucleotide chain in a given structure and produces a color coding for each residue based on three-dimensional structure information. From this, color-highlighted sequences are obtained, where residue coloring represent three-dimensional residue locations in the structure. This color encoding thus provides a one-dimensional representation, from which spatial interactions, proximity and relations between residues or entire chains can be deduced quickly and solely from color similarity. Furthermore, additional heteroatoms and chemical compounds bound to the structure, like ligands or coenzymes, are processed and reported as well. To provide free access to SequenceCEROSENE, a web server has been implemented that allows generating color codings for structures deposited in the Protein Data Bank or structure models uploaded by the user. Besides retrieving visualizations in popular graphic formats, underlying raw data can be downloaded as well. In addition, the server provides user interactivity with generated visualizations and the three-dimensional structure in question. Color encoded sequences generated by SequenceCEROSENE can aid to quickly perceive the general characteristics of a structure of interest (or entire sets of complexes), thus supporting the researcher in the initial

  10. Growth of lead molybdate crystals by vertical Bridgman method

    Indian Academy of Sciences (India)

    Unknown

    The seeds were put in the seed wells, then the feed materials were filled in the cylinder of crucibles. The assembled crucible was sealed in order to prevent the volatilization of the melt during crystal growth. The cru- cible was installed in a refractory tube filled with Al2O3 powder to isolate it from external temperature fluctua-.

  11. Methods for measuring arctic and alpine shrub growth: A review

    NARCIS (Netherlands)

    Myers-Smith, I.H.; Hallinger, M.; Blok, D.; Sass-Klaassen, U.G.W.; Rayback, S.A.

    2015-01-01

    Shrubs have increased in abundance and dominance in arctic and alpine regions in recent decades. This often dramatic change, likely due to climate warming, has the potential to alter both the structure and function of tundra ecosystems. The analysis of shrub growth is improving our understanding of

  12. Costs and Efficiency of Online and Offline Recruitment Methods: A Web-Based Cohort Study

    Science.gov (United States)

    Riis, Anders H; Hatch, Elizabeth E; Wise, Lauren A; Nielsen, Marie G; Rothman, Kenneth J; Toft Sørensen, Henrik; Mikkelsen, Ellen M

    2017-01-01

    Background The Internet is widely used to conduct research studies on health issues. Many different methods are used to recruit participants for such studies, but little is known about how various recruitment methods compare in terms of efficiency and costs. Objective The aim of our study was to compare online and offline recruitment methods for Internet-based studies in terms of efficiency (number of recruited participants) and costs per participant. Methods We employed several online and offline recruitment methods to enroll 18- to 45-year-old women in an Internet-based Danish prospective cohort study on fertility. Offline methods included press releases, posters, and flyers. Online methods comprised advertisements placed on five different websites, including Facebook and Netdoktor.dk. We defined seven categories of mutually exclusive recruitment methods and used electronic tracking via unique Uniform Resource Locator (URL) and self-reported data to identify the recruitment method for each participant. For each method, we calculated the average cost per participant and efficiency, that is, the total number of recruited participants. Results We recruited 8252 study participants. Of these, 534 were excluded as they could not be assigned to a specific recruitment method. The final study population included 7724 participants, of whom 803 (10.4%) were recruited by offline methods, 3985 (51.6%) by online methods, 2382 (30.8%) by online methods not initiated by us, and 554 (7.2%) by other methods. Overall, the average cost per participant was €6.22 for online methods initiated by us versus €9.06 for offline methods. Costs per participant ranged from €2.74 to €105.53 for online methods and from €0 to €67.50 for offline methods. Lowest average costs per participant were for those recruited from Netdoktor.dk (€2.99) and from Facebook (€3.44). Conclusions In our Internet-based cohort study, online recruitment methods were superior to offline methods in terms

  13. Asynchronous web-based learning, a practical method to enhance teaching in emergency medicine.

    Science.gov (United States)

    Pourmand, Ali; Lucas, Raymond; Nouraie, Mehdi

    2013-03-01

    Abstract Objective: To compare medical knowledge acquisition among emergency medicine (EM) residents who attend weekly core content lectures with those absent but asynchronously viewing the same lectures in a Web-based electronic platform. During the study period all EM residents attending or absent from weekly educational conferences were given a quiz on the covered material. During Phase 1, absentees were not given supplemental educational content for missed lectures. During Phase 2, absentees were sent a link to an online multimedia module containing an audiovisual recording of the actual missed lecture with presentation slides. Scores between attendees and absentees during both phases were compared using a repeated-measures analysis to evaluate the effect of the supplemental online module on knowledge acquisition. Thirty-nine EM residents (equally distributed in postgraduate years 1-4) were studied during a 15-week period. Overall and after adjusting for sex and postgraduate year level, both lecture attendance (b=27; 95% confidence interval, 22-32; pcontent lectures. The percentage of curriculum delivery by asynchronous learning that may be used to achieve overall terminal learning objectives in medical knowledge acquisition requires further study.

  14. The mind over the Web: the quest for the definition of a method for Internet research.

    Science.gov (United States)

    Riva, G

    2001-02-01

    Psychology is increasingly interested in understanding the characteristics of the Internet and its effects on people, groups and organizations. However, studying the Internet is not a simple task. First, the Internet is a medium that can be experienced in many different ways. Though a computer and keyboard are usually the mediator of our Internet experience, there are different ways in which users can explore the Internet, present themselves, and communicate using it. Second, the Internet is a social and cognitive space. The handling of information is linked to the activation of psychosocial relationships in which cognitions are elaborated. This happens inside a rather special kind of container--Cyberspace--which tends to rarefy the structural and process features of communication. Third, the Internet experience is always situated in a specific context, even when we are chatting alone in a room. In this sense it can only be fully understood through detailed analysis of the social context in which it happens. Starting from a general three-level model of interpersonal interaction in the Web, this paper tries to define a model of data analysis (Complementary Explorative Multilevel Data Analysis--CEMDA) suited to the constraints of Internet research. The main characteristics of the model are: the focus on different frames and objects for each considered unit of research; the mixed use of quantitative and qualitative tools; and the final integration of results in a general framework.

  15. Costs and Efficiency of Online and Offline Recruitment Methods: A Web-Based Cohort Study.

    Science.gov (United States)

    Christensen, Tina; Riis, Anders H; Hatch, Elizabeth E; Wise, Lauren A; Nielsen, Marie G; Rothman, Kenneth J; Toft Sørensen, Henrik; Mikkelsen, Ellen M

    2017-03-01

    The Internet is widely used to conduct research studies on health issues. Many different methods are used to recruit participants for such studies, but little is known about how various recruitment methods compare in terms of efficiency and costs. The aim of our study was to compare online and offline recruitment methods for Internet-based studies in terms of efficiency (number of recruited participants) and costs per participant. We employed several online and offline recruitment methods to enroll 18- to 45-year-old women in an Internet-based Danish prospective cohort study on fertility. Offline methods included press releases, posters, and flyers. Online methods comprised advertisements placed on five different websites, including Facebook and Netdoktor.dk. We defined seven categories of mutually exclusive recruitment methods and used electronic tracking via unique Uniform Resource Locator (URL) and self-reported data to identify the recruitment method for each participant. For each method, we calculated the average cost per participant and efficiency, that is, the total number of recruited participants. We recruited 8252 study participants. Of these, 534 were excluded as they could not be assigned to a specific recruitment method. The final study population included 7724 participants, of whom 803 (10.4%) were recruited by offline methods, 3985 (51.6%) by online methods, 2382 (30.8%) by online methods not initiated by us, and 554 (7.2%) by other methods. Overall, the average cost per participant was €6.22 for online methods initiated by us versus €9.06 for offline methods. Costs per participant ranged from €2.74 to €105.53 for online methods and from €0 to €67.50 for offline methods. Lowest average costs per participant were for those recruited from Netdoktor.dk (€2.99) and from Facebook (€3.44). In our Internet-based cohort study, online recruitment methods were superior to offline methods in terms of efficiency (total number of participants

  16. Inclusion free cadmium zinc tellurium and cadmium tellurium crystals and associated growth method

    Science.gov (United States)

    Bolotnikov, Aleskey E [South Setauket, NY; James, Ralph B [Ridge, NY

    2010-07-20

    The present disclosure provides systems and methods for crystal growth of cadmium zinc tellurium (CZT) and cadmium tellurium (CdTe) crystals with an inverted growth reactor chamber. The inverted growth reactor chamber enables growth of single, large, high purity CZT and CdTe crystals that can be used, for example, in X-ray and gamma detection, substrates for infrared detectors, or the like. The inverted growth reactor chamber enables reductions in the presence of Te inclusions, which are recognized as an important limiting factor in using CZT or CdTe as radiation detectors. The inverted growth reactor chamber can be utilized with existing crystal growth techniques such as the Bridgman crystal growth mechanism and the like. In an exemplary embodiment, the inverted growth reactor chamber is a U-shaped ampoule.

  17. A method of demand-driven and data-centric Web service configuration for flexible business process implementation

    Science.gov (United States)

    Xu, Boyi; Xu, Li Da; Fei, Xiang; Jiang, Lihong; Cai, Hongming; Wang, Shuai

    2017-08-01

    Facing the rapidly changing business environments, implementation of flexible business process is crucial, but difficult especially in data-intensive application areas. This study aims to provide scalable and easily accessible information resources to leverage business process management. In this article, with a resource-oriented approach, enterprise data resources are represented as data-centric Web services, grouped on-demand of business requirement and configured dynamically to adapt to changing business processes. First, a configurable architecture CIRPA involving information resource pool is proposed to act as a scalable and dynamic platform to virtualise enterprise information resources as data-centric Web services. By exposing data-centric resources as REST services in larger granularities, tenant-isolated information resources could be accessed in business process execution. Second, dynamic information resource pool is designed to fulfil configurable and on-demand data accessing in business process execution. CIRPA also isolates transaction data from business process while supporting diverse business processes composition. Finally, a case study of using our method in logistics application shows that CIRPA provides an enhanced performance both in static service encapsulation and dynamic service execution in cloud computing environment.

  18. Methods of forecasting crack growth rate under creep conditions

    International Nuclear Information System (INIS)

    Ol'kin, S.I.

    1979-01-01

    Using construction aluminium alloy application possibility of linear mechanics of the destruction for quantitative description of crack development process under creepage conditions is investigated. It is shown, that the grade dependence between the stress intensity coefficient and the crack growth rate takes place only at certain combination of the sample geometry and creepage parameters, and consequently, its applicability in every given case must necessarily be tested experimentally

  19. Insulin-like growth factors: assay methods and their implications

    International Nuclear Information System (INIS)

    Guyda, H.J.; Posner, B.I.; Schiffrin, A.; Rappaport, R.; Postel-Vinay, M.C.; Corvol, M.T.

    1981-01-01

    The insulin-like growth factors (IGF's) are small molecular weight peptides (6-10 x 10 3 daltons) that circulate in blood plasma almost entirely bound to macromolecular carrier proteins. The growth-promoting and insulin-like activities of IGF's can be explained by the observed ability of these peptides to interact with the IGF receptor on the one hand and with the insulin receptor on the other. These observations have led to the establishment of radioreceptor assays (RRA's), competitive protein binding assays (CPBA's), and more recently radioimmunoassays (RIA's) for the IGF's that have different specificities. Because of their ease of performance and sensitivity, the radioligand assays have largely supplanted the biological assays originally utilized to identify and characterize these anabolic peptides. In this report the authors' studies are summarised which utilize a slightly acidic IGF which has been purified on the basis of its insulin-like activity in an insulin RRA and which was termed ILAs. They refer to purified insulin-like peptides that have the properties of a somatomedin by the generic term insulin-like growth factor (IGF). Somatomedin (SM) activity will be utilized to connote that activity in plasma or serum determined by bioassay. The competitive dose-response curves for IGF peptides in the insulin RRA as well as those in the ILAs RRA are presented. A combination of bioassays, RRA and RIA were employed to assess somatomedin activity and IGF peptide levels in a number of clinical circumstances. The correlations are discussed. (Auth.)

  20. Utilizing mixed methods research in analyzing Iranian researchers’ informarion search behaviour in the Web and presenting current pattern

    Directory of Open Access Journals (Sweden)

    Maryam Asadi

    2015-12-01

    Full Text Available Using mixed methods research design, the current study has analyzed Iranian researchers’ information searching behaviour on the Web.Then based on extracted concepts, the model of their information searching behavior was revealed. . Forty-four participants, including academic staff from universities and research centers were recruited for this study selected by purposive sampling. Data were gathered from questionnairs including ten questions and semi-structured interview. Each participant’s memos were analyzed using grounded theory methods adapted from Strauss & Corbin (1998. Results showed that the main objectives of subjects were doing a research, writing a paper, studying, doing assignments, downloading files and acquiring public information in using Web. The most important of learning about how to search and retrieve information were trial and error and get help from friends among the subjects. Information resources are identified by searching in information resources (e.g. search engines, references in papers, and search in Online database… communications facilities & tools (e.g. contact with colleagues, seminars & workshops, social networking..., and information services (e.g. RSS, Alerting, and SDI. Also, Findings indicated that searching by search engines, reviewing references, searching in online databases, and contact with colleagues and studying last issue of the electronic journals were the most important for searching. The most important strategies were using search engines and scientific tools such as Google Scholar. In addition, utilizing from simple (Quick search method was the most common among subjects. Using of topic, keywords, title of paper were most important of elements for retrieval information. Analysis of interview showed that there were nine stages in researchers’ information searching behaviour: topic selection, initiating search, formulating search query, information retrieval, access to information

  1. Integration of Web mining and web crawler: Relevance and State of Art

    OpenAIRE

    Subhendu kumar pani; Deepak Mohapatra,; Bikram Keshari Ratha

    2010-01-01

    This study presents the role of web crawler in web mining environment. As the growth of the World Wide Web exceeded all expectations,the research on Web mining is growing more and more.web mining research topic which combines two of the activated research areas: Data Mining and World Wide Web .So, the World Wide Web is a very advanced area for data mining research. Search engines that are based on web crawling framework also used in web mining to find theinteracted web pages. This paper discu...

  2. Web-based emergency response exercise management systems and methods thereof

    Science.gov (United States)

    Goforth, John W.; Mercer, Michael B.; Heath, Zach; Yang, Lynn I.

    2014-09-09

    According to one embodiment, a method for simulating portions of an emergency response exercise includes generating situational awareness outputs associated with a simulated emergency and sending the situational awareness outputs to a plurality of output devices. Also, the method includes outputting to a user device a plurality of decisions associated with the situational awareness outputs at a decision point, receiving a selection of one of the decisions from the user device, generating new situational awareness outputs based on the selected decision, and repeating the sending, outputting and receiving steps based on the new situational awareness outputs. Other methods, systems, and computer program products are included according to other embodiments of the invention.

  3. The potential of Web-based interventions for heart disease self-management: a mixed methods investigation.

    Science.gov (United States)

    Kerr, Cicely; Murray, Elizabeth; Noble, Lorraine; Morris, Richard; Bottomley, Christian; Stevenson, Fiona; Patterson, David; Peacock, Richard; Turner, Indra; Jackson, Keith; Nazareth, Irwin

    2010-12-02

    Existing initiatives to support patient self-management of heart disease do not appear to be reaching patients most in need. Providing self-management programs over the Internet (web-based interventions) might help reduce health disparities by reaching a greater number of patients. However, it is unclear whether they can achieve this goal and whether their effectiveness might be limited by the digital divide. To explore the effectiveness of a web-based intervention in decreasing inequalities in access to self-management support in patients with coronary heart disease (CHD). Quantitative and qualitative methods were used to explore use made of a web-based intervention over a period of 9 months. Patients with CHD, with or without home Internet access or previous experience using the Internet, were recruited from primary care centers in diverse socioeconomic and ethnic areas of North London, UK. Patients without home Internet were supported in using the intervention at public Internet services. Only 10.6% of eligible patients chose to participate (N=168). Participants were predominantly Caucasian well-educated men, with greater proportions of male and younger CHD patients among participants than were registered at participating primary care practices. Most had been diagnosed with CHD a number of years prior to the study. Relatively few had been newly diagnosed or had experienced a cardiac event in the previous 5 years. Most had home Internet access and prior experience using the Internet. A greater use of the intervention was observed in older participants (for each 5-year age increase, OR 1.25 for no, low or high intervention use, 95% CI, 1.06-1.47) and in those that had home Internet access and prior Internet experience (OR 3.74, 95% CI, 1.52-9.22). Less use was observed in participants that had not recently experienced a cardiac event or diagnosis (≥ 5 years since cardiac event or diagnosis; OR 0.69, 95% CI, 0.50-0.95). Gender and level of education were not

  4. Simplified web-based decision support method for traffic management and work zone analysis.

    Science.gov (United States)

    2015-06-01

    Traffic congestion mitigation is one of the key challenges that transportation planners and operations engineers face when : planning for construction and maintenance activities. There is a wide variety of approaches and methods that address work : z...

  5. METHOD FOR EVALUATING MOLD GROWTH ON CEILING TILE

    Science.gov (United States)

    A method to extract mold spores from porous ceiling tiles was developed using a masticator blender. Ceiling tiles were inoculated and analyzed using four species of mold. Statistical analysis comparing results obtained by masticator extraction and the swab method was performed. T...

  6. Prior approval: the growth of Bayesian methods in psychology.

    Science.gov (United States)

    Andrews, Mark; Baguley, Thom

    2013-02-01

    Within the last few years, Bayesian methods of data analysis in psychology have proliferated. In this paper, we briefly review the history or the Bayesian approach to statistics, and consider the implications that Bayesian methods have for the theory and practice of data analysis in psychology.

  7. Measurement of fatigue crack growth rate of reactor structural material in air based on DCPD method

    International Nuclear Information System (INIS)

    Du Donghai; Chen Kai; Yu Lun; Zhang Lefu; Shi Xiuqiang; Xu Xuelian

    2014-01-01

    The principles and details of direct current potential drop (DCPD) in monitoring the crack growth of reactor structural materials was introduced in this paper. Based on this method, the fatigue crack growth rate (CGR) of typical structural materials in nuclear power systems was measured. The effects of applied load, load ratio and loading frequency on the fatigue crack growth rate of reactor structural materials were discussed. The result shows that the fatigue crack growth rate of reactor structural materials depends on the hardness of materials, and the harder the material is, the higher the rate of crack growth is. (authors)

  8. A hydroponic method for plant growth in microgravity

    Science.gov (United States)

    Wright, B. D.

    1985-01-01

    A hydroponic apparatus under development for long-term microgravity plant growth is described. The capillary effect root environment system (CERES) is designed to keep separate the nutrient and air flows, although both must be simultaneously available to the roots. Water at a pressure slightly under air pressure is allowed to seep into a plastic depression covered by a plastic screen and a porous membrane. A root in the air on the membrane outer surface draws the moisture through it. The laboratory model has a wire-based 1.241 mm mesh polyethylene screen and a filter membrane with 0.45 micron pores, small enough to prohibit root hair penetration. The design eliminates the need to seal-off the plant environment. Problems still needing attention include scaling up of the CERES size, controlling biofouling of the membrane, and extending the applications to plants without fibrous root systems.

  9. A Web-based Alternative Non-animal Method Database for Safety Cosmetic Evaluations.

    Science.gov (United States)

    Kim, Seung Won; Kim, Bae-Hwan

    2016-07-01

    Animal testing was used traditionally in the cosmetics industry to confirm product safety, but has begun to be banned; alternative methods to replace animal experiments are either in development, or are being validated, worldwide. Research data related to test substances are critical for developing novel alternative tests. Moreover, safety information on cosmetic materials has neither been collected in a database nor shared among researchers. Therefore, it is imperative to build and share a database of safety information on toxicological mechanisms and pathways collected through in vivo, in vitro, and in silico methods. We developed the CAMSEC database (named after the research team; the Consortium of Alternative Methods for Safety Evaluation of Cosmetics) to fulfill this purpose. On the same website, our aim is to provide updates on current alternative research methods in Korea. The database will not be used directly to conduct safety evaluations, but researchers or regulatory individuals can use it to facilitate their work in formulating safety evaluations for cosmetic materials. We hope this database will help establish new alternative research methods to conduct efficient safety evaluations of cosmetic materials.

  10. Detecting long-term growth trends using tree rings: a critical evaluation of methods.

    Science.gov (United States)

    Peters, Richard L; Groenendijk, Peter; Vlam, Mart; Zuidema, Pieter A

    2015-05-01

    Tree-ring analysis is often used to assess long-term trends in tree growth. A variety of growth-trend detection methods (GDMs) exist to disentangle age/size trends in growth from long-term growth changes. However, these detrending methods strongly differ in approach, with possible implications for their output. Here, we critically evaluate the consistency, sensitivity, reliability and accuracy of four most widely used GDMs: conservative detrending (CD) applies mathematical functions to correct for decreasing ring widths with age; basal area correction (BAC) transforms diameter into basal area growth; regional curve standardization (RCS) detrends individual tree-ring series using average age/size trends; and size class isolation (SCI) calculates growth trends within separate size classes. First, we evaluated whether these GDMs produce consistent results applied to an empirical tree-ring data set of Melia azedarach, a tropical tree species from Thailand. Three GDMs yielded similar results - a growth decline over time - but the widely used CD method did not detect any change. Second, we assessed the sensitivity (probability of correct growth-trend detection), reliability (100% minus probability of detecting false trends) and accuracy (whether the strength of imposed trends is correctly detected) of these GDMs, by applying them to simulated growth trajectories with different imposed trends: no trend, strong trends (-6% and +6% change per decade) and weak trends (-2%, +2%). All methods except CD, showed high sensitivity, reliability and accuracy to detect strong imposed trends. However, these were considerably lower in the weak or no-trend scenarios. BAC showed good sensitivity and accuracy, but low reliability, indicating uncertainty of trend detection using this method. Our study reveals that the choice of GDM influences results of growth-trend studies. We recommend applying multiple methods when analysing trends and encourage performing sensitivity and reliability

  11. Methods to quantify soft-tissue based facial growth and treatment outcomes in children: a systematic review.

    Directory of Open Access Journals (Sweden)

    Sander Brons

    Full Text Available CONTEXT: Technological advancements have led craniofacial researchers and clinicians into the era of three-dimensional digital imaging for quantitative evaluation of craniofacial growth and treatment outcomes. OBJECTIVE: To give an overview of soft-tissue based methods for quantitative longitudinal assessment of facial dimensions in children until six years of age and to assess the reliability of these methods in studies with good methodological quality. DATA SOURCE: PubMed, EMBASE, Cochrane Library, Web of Science, Scopus and CINAHL were searched. A hand search was performed to check for additional relevant studies. STUDY SELECTION: Primary publications on facial growth and treatment outcomes in children younger than six years of age were included. DATA EXTRACTION: Independent data extraction by two observers. A quality assessment instrument was used to determine the methodological quality. Methods, used in studies with good methodological quality, were assessed for reliability expressed as the magnitude of the measurement error and the correlation coefficient between repeated measurements. RESULTS: In total, 47 studies were included describing 4 methods: 2D x-ray cephalometry; 2D photography; anthropometry; 3D imaging techniques (surface laser scanning, stereophotogrammetry and cone beam computed tomography. In general the measurement error was below 1 mm and 1° and correlation coefficients range from 0.65 to 1.0. CONCLUSION: Various methods have shown to be reliable. However, at present stereophotogrammetry seems to be the best 3D method for quantitative longitudinal assessment of facial dimensions in children until six years of age due to its millisecond fast image capture, archival capabilities, high resolution and no exposure to ionizing radiation.

  12. Interactive overlays: a new method for generating global journal maps from Web-of-Science data

    NARCIS (Netherlands)

    Leydesdorff, L.; Rafols, I.

    2012-01-01

    Recent advances in methods and techniques enable us to develop interactive overlays to a global map of science based on aggregated citation relations among the 9162 journals contained in the Science Citation Index and Social Science Citation Index 2009. We first discuss the pros and cons of the

  13. Capillary Electrophoresis Method Development : Web-based self-paced training-on-demand

    NARCIS (Netherlands)

    Sänger - van de Griend, Cari

    2015-01-01

    If you use capillary electrophoresis (CE) in your work and want a better understanding of the technique, or want to start with CE method development and want to be well prepared, this course is for you. The course is designed for analytical scientists and technicians who use CE in their regular job,

  14. SU-F-E-07: Web-Based Training for Radiosurgery: Methods and Metrics for Global Reach

    International Nuclear Information System (INIS)

    Schulz, R; Thomas, E; Popple, R; Fiveash, J; Jacobsen, E

    2016-01-01

    Purpose: Webinars have become an evolving tool with greater or lesser success in reaching health care providers (HCPs). This study seeks to assess best practices and metrics for success in webinar deployment for optimal global reach. Methods: Webinars have been developed and launched to reach practicing health care providers in the field of radiation oncology and radiosurgery. One such webinar was launched in early February 2016. “Multiple Brain Metastases & Volumetric Modulated Arc Radiosurgery: Refining the Single-Isocenter Technique to Benefit Surgeons and Patients” presented by Drs. Fiveash and Thomas from UAB was submitted to and accredited by the Institute for Medical Education as qualifying for CME as well as MDCB for educational credit for dosimetrists, in order to encourage participation. MedicalPhysicsWeb was chosen as the platform to inform attendees regarding the webinar. Further IME accredited the activity for 1 AMA PRA Category 1 credit for physicians & medical physicists. The program was qualified by the ABR in meeting the criteria for self-assessment towards fulfilling MOC requirements. Free SAMs credits were underwritten by an educational grant from Varian Medical Systems. Results: The webinar in question attracted 992 pre-registrants from 66 countries. Outside the US and Canada; 11 were from the Americas; 32 were from Europe; 9 from the Middle East and Africa. Australasia and the Indian subcontinent represented the remaining 14 countries. Pre-registrants included 423 Medical Physicists, 225 Medical Dosimetrists, 24 Radiation Therapists, 66 Radiation Oncologists & other. Conclusion: The effectiveness of CME and SAM-CME programs such as this can be gauged by the high rate of respondents who state an intention to change practice habits, a primary goal of continuing medical education and self-assessment. This webinar succeeded in being the most successful webinar on Medical Physics Web as measured by pre-registration, participation and

  15. SU-F-E-07: Web-Based Training for Radiosurgery: Methods and Metrics for Global Reach

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, R [Varian Medical Systems, Palo Alto, CA (United States); Thomas, E [University of Alabama - Birmingham, Birmingham, AL (United States); Popple, R [The University of Alabama at Birmingham, Birmingham, AL (United States); Fiveash, J [University Alabama Birmingham, Birmingham, AL (United States); Jacobsen, E [Univesity of California, Los Angeles, Los Angeles, CA (United States)

    2016-06-15

    Purpose: Webinars have become an evolving tool with greater or lesser success in reaching health care providers (HCPs). This study seeks to assess best practices and metrics for success in webinar deployment for optimal global reach. Methods: Webinars have been developed and launched to reach practicing health care providers in the field of radiation oncology and radiosurgery. One such webinar was launched in early February 2016. “Multiple Brain Metastases & Volumetric Modulated Arc Radiosurgery: Refining the Single-Isocenter Technique to Benefit Surgeons and Patients” presented by Drs. Fiveash and Thomas from UAB was submitted to and accredited by the Institute for Medical Education as qualifying for CME as well as MDCB for educational credit for dosimetrists, in order to encourage participation. MedicalPhysicsWeb was chosen as the platform to inform attendees regarding the webinar. Further IME accredited the activity for 1 AMA PRA Category 1 credit for physicians & medical physicists. The program was qualified by the ABR in meeting the criteria for self-assessment towards fulfilling MOC requirements. Free SAMs credits were underwritten by an educational grant from Varian Medical Systems. Results: The webinar in question attracted 992 pre-registrants from 66 countries. Outside the US and Canada; 11 were from the Americas; 32 were from Europe; 9 from the Middle East and Africa. Australasia and the Indian subcontinent represented the remaining 14 countries. Pre-registrants included 423 Medical Physicists, 225 Medical Dosimetrists, 24 Radiation Therapists, 66 Radiation Oncologists & other. Conclusion: The effectiveness of CME and SAM-CME programs such as this can be gauged by the high rate of respondents who state an intention to change practice habits, a primary goal of continuing medical education and self-assessment. This webinar succeeded in being the most successful webinar on Medical Physics Web as measured by pre-registration, participation and

  16. Adaptive Tutorials Versus Web-Based Resources in Radiology: A Mixed Methods Comparison of Efficacy and Student Engagement.

    Science.gov (United States)

    Wong, Vincent; Smith, Ariella J; Hawkins, Nicholas J; Kumar, Rakesh K; Young, Noel; Kyaw, Merribel; Velan, Gary M

    2015-10-01

    Diagnostic imaging is under-represented in medical curricula globally. Adaptive tutorials, online intelligent tutoring systems that provide a personalized learning experience, have the potential to bridge this gap. However, there is limited evidence of their effectiveness for learning about diagnostic imaging. We performed a randomized mixed methods crossover trial to determine the impact of adaptive tutorials on perceived engagement and understanding of the appropriate use and interpretation of common diagnostic imaging investigations. Although concurrently engaged in disparate blocks of study, 99 volunteer medical students (from years 1-4 of the 6-year program) were randomly allocated to one of two groups. In the first arm of the trial on chest X-rays, one group received access to an adaptive tutorial, whereas the other received links to an existing peer-reviewed Web resource. These two groups crossed over in the second arm of the trial, which focused on computed tomography scans of the head, chest, and abdomen. At the conclusion of each arm of the trial, both groups completed an examination-style assessment, comprising questions both related and unrelated to the topics covered by the relevant adaptive tutorial. Online questionnaires were used to evaluate student perceptions of both learning resources. In both arms of the trial, the group using adaptive tutorials obtained significantly higher assessment scores than controls. This was because of higher assessment scores by senior students in the adaptive tutorial group when answering questions related to topics covered in those tutorials. Furthermore, students indicated significantly better engagement with adaptive tutorials than the Web resource and rated the tutorials as a significantly more valuable tool for learning. Medical students overwhelmingly accept adaptive tutorials for diagnostic imaging. The tutorials significantly improve the understanding of diagnostic imaging by senior students. Crown Copyright

  17. Growth

    Science.gov (United States)

    John R. Jones; George A. Schier

    1985-01-01

    This chapter considers aspen growth as a process, and discusses some characteristics of the growth and development of trees and stands. For the most part, factors affecting growth are discussed elsewhere, particularly in the GENETICS AND VARIATION chapter and in chapters in PART 11. ECOLOGY. Aspen growth as it relates to wood production is examined in the WOOD RESOURCE...

  18. Designing Web-based GIS Application by CSF Method: A Case Study in Boven Digoel Papua

    Science.gov (United States)

    Letsoin, Hendrykus Saritangdan; JSantoso, Albertus Joko; Suyoto

    2018-02-01

    Since Boven Digoel Regency was established in 2003, to this day its infrastructures are very limited, the region is still not developed, Human Resources (SDM) and Information and Communication Technology are still manual. The development of Geographic Information System was expected to contribute to ICT development in Papua, particularly Boven Digoel Regency, in displaying data of existing local potentials, e.g. tourism, plantation and forestry. Critical Success Factor Method was the right method in considering factors determining the success of the implementation of a strategy, in good information management and in providing data of local potentials of geographic information system for people in Boven Digoel Regency and the people of Indonesia in general to introduce Boven Digoel Regency, Papua. Framework Laravel with PHP programming language was expected to support Geographic Information System well to determine the distribution of local potentials in Boven Digoel Regency‥

  19. Designing Web-based GIS Application by CSF Method: A Case Study in Boven Digoel Papua

    Directory of Open Access Journals (Sweden)

    Saritangdan Letsoin Hendrykus

    2018-01-01

    Full Text Available Since Boven Digoel Regency was established in 2003, to this day its infrastructures are very limited, the region is still not developed, Human Resources (SDM and Information and Communication Technology are still manual. The development of Geographic Information System was expected to contribute to ICT development in Papua, particularly Boven Digoel Regency, in displaying data of existing local potentials, e.g. tourism, plantation and forestry. Critical Success Factor Method was the right method in considering factors determining the success of the implementation of a strategy, in good information management and in providing data of local potentials of geographic information system for people in Boven Digoel Regency and the people of Indonesia in general to introduce Boven Digoel Regency, Papua. Framework Laravel with PHP programming language was expected to support Geographic Information System well to determine the distribution of local potentials in Boven Digoel Regency‥

  20. NetFCM: A Semi-Automated Web-Based Method for Flow Cytometry Data Analysis

    DEFF Research Database (Denmark)

    Frederiksen, Juliet Wairimu; Buggert, Marcus; Karlsson, Annika C.

    2014-01-01

    data analysis has become more complex and labor-intensive than previously. We have therefore developed a semi-automatic gating strategy (NetFCM) that uses clustering and principal component analysis (PCA) together with other statistical methods to mimic manual gating approaches. NetFCM is an online...... tool both for subset identification as well as for quantification of differences between samples. Additionally, NetFCM can classify and cluster samples based on multidimensional data. We tested the method using a data set of peripheral blood mononuclear cells collected from 23 HIV-infected individuals...... corresponding to those obtained by manual gating strategies. These data demonstrate that NetFCM has the potential to identify relevant T cell populations by mimicking classical FCM data analysis and reduce the subjectivity and amount of time associated with such analysis. (c) 2014 International Society...

  1. A Web-based Alternative Non-animal Method Database for Safety Cosmetic Evaluations

    OpenAIRE

    Kim, Seung Won; Kim, Bae-Hwan

    2016-01-01

    Animal testing was used traditionally in the cosmetics industry to confirm product safety, but has begun to be banned; alternative methods to replace animal experiments are either in development, or are being validated, worldwide. Research data related to test substances are critical for developing novel alternative tests. Moreover, safety information on cosmetic materials has neither been collected in a database nor shared among researchers. Therefore, it is imperative to build and share a d...

  2. Web Mining

    Science.gov (United States)

    Fürnkranz, Johannes

    The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to Web data and documents. This chapter provides a brief overview of web mining techniques and research areas, most notably hypertext classification, wrapper induction, recommender systems and web usage mining.

  3. Growth of Cu thin films by the successive ionic layer adsorption and reaction (SILAR) method

    International Nuclear Information System (INIS)

    Lindroos, S.; Ruuskanen, T.; Ritala, M.; Leskelae, M.

    2004-01-01

    Copper thin films were grown on reduced indium tin oxide, molybdenum and polymer substrates using successive ionic layer adsorption and reaction (SILAR) method. Copper films were grown sequentially in a controlled way using simple copper salt and basic solution of formaldehyde as precursors. The copper films were polycrystalline with no preferred orientation as characterised by X-ray diffraction. On all substrates, the growth was clearly island growth in the beginning but after the whole surface was covered, the growth was more homogeneous

  4. Sensitive double-antibody method for simultaneous determination of insulin and growth hormone

    International Nuclear Information System (INIS)

    Koparanova, O.; Sotirov, G.; Tyrkolev, N.

    1982-01-01

    A method is described for simultaneous determination of insulin and growth hormone in one sample, using double-antibody technique. The method is characterized by appreciable sensitivity (2.5 μE/ml for insulin and a.2 ng/ml for growth hormone), exactness (variation quotient 6-16 per cent) and reproducibility (96.9-117 per cent). There was no statistically significant difference in the insulin and growth hormone values of the same sera, determined by the here suggested and the standard methods. The necessary test material for examination of either hormone is minimal (0.2 ml). One may thus extend the possibilities for radioimmunologic determination of insulin and growth hormone, when only minor amounts of serum or other biological fluid are available. The method is also less time consuming. Results are reported of statistical processing of an experimental model and different sera determined by the standard method and the one described by the authors. (author)

  5. A Comparison of Web-Based and Paper-Based Survey Methods: Testing Assumptions of Survey Mode and Response Cost

    Science.gov (United States)

    Greenlaw, Corey; Brown-Welty, Sharon

    2009-01-01

    Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and…

  6. Using experts’ consensus (the Delphi method) to evaluate weighting techniques in web surveys not based on probability schemes

    NARCIS (Netherlands)

    Toepoel, V.; Emerson, Hannah

    2017-01-01

    Weighting techniques in web surveys based on no probability schemes are devised to correct biases due to self-selection, undercoverage, and nonresponse. In an interactive panel, 38 survey experts addressed weighting techniques and auxiliary variables in web surveys. Most of them corrected all biases

  7. Comparison of Fluorescence Microscopy and Different Growth Media Culture Methods for Acanthamoeba Keratitis Diagnosis.

    Science.gov (United States)

    Peretz, Avi; Geffen, Yuval; Socea, Soergiu D; Pastukh, Nina; Graffi, Shmuel

    2015-08-01

    Acanthamoeba keratitis (AK), a potentially blinding infection of the cornea, is caused by a free-living protozoan. Culture and microscopic examination of corneal scraping tissue material is the conventional method for identifying Acanthamoeba. In this article, we compared several methods for AK diagnosis of 32 patients: microscopic examination using fluorescent dye, specific culture on growth media-non-nutrient agar (NNA), culture on liquid growth media-peptone yeast glucose (PYG), and TYI-S-33. AK was found in 14 patients. Thirteen of the specimens were found AK positive by fluorescence microscopic examination, 11 specimens were found AK positive on PYG growth media, and 9 specimens were found AK positive on TYI-S-33 growth media. Only five specimens were found AK positive on NNA growth media. Therefore, we recommend using fluorescence microscopy technique and culture method, especially PYG liquid media. © The American Society of Tropical Medicine and Hygiene.

  8. New synthesis method for the growth of epitaxial graphene

    Energy Technology Data Exchange (ETDEWEB)

    Yu, X.Z. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Laboratory of Condensed Matter Spectroscopy and Opto-Electronic Physics, Department of Physics, Shanghai Jiao Tong University, 1954 Hua Shan Road, Shanghai 200030 (China); Hwang, C.G.; Jozwiak, C.M.; Koehl, A. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Schmid, A.K. [National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, Berkeley, CA 94709 (United States); Lanzara, A., E-mail: ALanzara@lbl.gov [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Department of Physics, University of California, Berkeley, CA 94720 (United States)

    2011-04-15

    Highlights: {yields} We report a new straightforward method for the synthesis of micrometer scale graphene sheets. {yields} The process is based on a face to face mehtod in which two SiC substrates are placed one on top of the other and are heated simultaneously, leading to highly homogeneous samples. {yields} The number of graphene layers is determined by the annealing temperature. - Abstract: As a viable candidate for an all-carbon post-CMOS electronics revolution, epitaxial graphene has attracted significant attention. To realize its application potential, reliable methods for fabricating large-area single-crystalline graphene domains are required. A new way to synthesize high quality epitaxial graphene, namely 'face-to-face' method, has been reported in this paper. The structure and morphologies of the samples are characterized by low-energy electron diffraction, atomic force microscopy, angle-resolved photoemission spectroscopy and Raman spectroscopy. The grown samples show better quality and larger length scales than samples grown through conventional thermal desorption. Moreover, the graphene thickness can be easily controlled by changing annealing temperature.

  9. Monitoring crack growth by a potential drop method

    International Nuclear Information System (INIS)

    Tomlinson, J.R.

    1978-01-01

    A theoretical model has been developed for the surface current flow and potential distribution around a surface breaking crack. This model's predictions have been confirmed in the laboratory and the method applied on site. It proved possible by careful design and rigorous testing to overcome the problems of interference in an electrically noisy environment. The principal weaknesses of the technique are that it is only capable of detecting cracks that break the accessible surface of the component, and that there may be problems with conductive bridging across the crack. On the other hand, the lack of any sophisticated probe in contact with the component makes the method suitable for high temperature use, and, being an electrical method, it is capable of continuous use. The use of a.c., as opposed to d.c., enables lower currents to be used. Given good access to the crack tip, a high sensitivity can be obtained, which enables noise rejection to be achieved with the use of a high threshold. (orig.) [de

  10. A STUDY ON RANKING METHOD IN RETRIEVING WEB PAGES BASED ON CONTENT AND LINK ANALYSIS: COMBINATION OF FOURIER DOMAIN SCORING AND PAGERANK SCORING

    Directory of Open Access Journals (Sweden)

    Diana Purwitasari

    2008-01-01

    Full Text Available Ranking module is an important component of search process which sorts through relevant pages. Since collection of Web pages has additional information inherent in the hyperlink structure of the Web, it can be represented as link score and then combined with the usual information retrieval techniques of content score. In this paper we report our studies about ranking score of Web pages combined from link analysis, PageRank Scoring, and content analysis, Fourier Domain Scoring. Our experiments use collection of Web pages relate to Statistic subject from Wikipedia with objectives to check correctness and performance evaluation of combination ranking method. Evaluation of PageRank Scoring show that the highest score does not always relate to Statistic. Since the links within Wikipedia articles exists so that users are always one click away from more information on any point that has a link attached, it it possible that unrelated topics to Statistic are most likely frequently mentioned in the collection. While the combination method show link score which is given proportional weight to content score of Web pages does effect the retrieval results.

  11. Web-based application on employee performance assessment using exponential comparison method

    Science.gov (United States)

    Maryana, S.; Kurnia, E.; Ruyani, A.

    2017-02-01

    Employee performance assessment is also called a performance review, performance evaluation, or assessment of employees, is an effort to assess the achievements of staffing performance with the aim to increase productivity of employees and companies. This application helps in the assessment of employee performance using five criteria: Presence, Quality of Work, Quantity of Work, Discipline, and Teamwork. The system uses the Exponential Comparative Method and Weighting Eckenrode. Calculation results using graphs were provided to see the assessment of each employee. Programming language used in this system is written in Notepad++ and MySQL database. The testing result on the system can be concluded that this application is correspond with the design and running properly. The test conducted is structural test, functional test, and validation, sensitivity analysis, and SUMI testing.

  12. Investigations on pelagic food webs in mountain lakes - aims and methods

    Directory of Open Access Journals (Sweden)

    Jirí NEDOMA

    1999-08-01

    Full Text Available A methodical approach for the assessment of pelagic biomass and the main carbon fluxes in remote and hardly accessible mountain lakes was elaborated and tested. Number and biomass of bacteria (BAC, autotrophic picoplankton (APP, heterotrophic nanoflagellates (HNF, ciliates (CIL, phytoplankton (PHY, zooplankton smaller than 40 μm (ZOOS and zooplankton larger than 40 μm (ZOOL were investigated regularly during two ice-free periods in 13 European mountain lakes (1st level approach – fixed samples elaborated in specialized laboratories. Carbon fluxes measured in 9 lakes included: primary production, exudation by PHY and BAC uptake of exudates, BAC production, elimination of BAC. These processes were measured in the field by specialized teams (2nd level approach. The ranges of values found in mountain lakes were evaluated and possible methodical and interpretative errors discussed. BAC were a significant component of pelagic biomass. The intercomparison between different partners showed differences in bacterial counts lower than 10%, whereas the mean cell volumes measured fluctuated by more than 40%. APP was never found in a significant quantity, except in one lake. HNF and CIL, though regularly found, were usually scarce and only occasionally significant in terms of biomass. The main components of pelagic biomass were BAC, PHY and ZOOL+ZOOS, except for acidified lakes, where zooplankton was very low. In oligotrophic mountain lakes, the percentage of extracellular production in the total primary production was considerable. Bacterial abundance and production often reached values quite comparable with the situation found in lowland mesotrophic lakes during winter.

  13. Conformal growth method of ferroelectric materials for multifunctional composites

    Science.gov (United States)

    Bowland, Christopher Charles

    Multifunctional composites are the next generation of composites and aim to simultaneously meet multiple performance objectives to create system-level performance enhancements. Current fiber-reinforced composites have offered improved efficiency and performance through weight reduction and increased strength. However, these composites satisfy singular performance objectives. Therefore, the concept of multifunctional composites was developed as an approach to create components in a system that serve multiple functions. These composites aim to reduce the required components in a system by integrating unifunctional components together thus reducing the weight and complexity of the system as a whole. This work offers an approach to create multifunctional composites through the development of a structural, multifunctional fiber. This is achieved by synthesizing a ferroelectric material on the surface of carbon fiber. In this work, a two-step hydrothermal reaction is developed for synthesizing a conformal film of barium titanate (BaTiO3) on the surface of carbon fiber. A fundamental understanding of this hydrothermal process is performed on planar substrates leading to the development of processing parameters that result in epitaxial-type growth of highly-aligned BaTiO3 nanowires. This work establishes the hydrothermal reaction as a powerful synthesis technique for generating nanostructured BaTiO3 on carbon fiber creating a novel, multifunctional fiber. A reaction optimization process leads to the development of parameters that stabilize tetragonal phase BaTiO3 without the need for subsequent heat treatments. The application potential of these fibers is illustrated with both single fibers and woven fabrics. Single fiber cantilever beams are fabricated and subjected to vibrations to determine its voltage output with the ultimate goal of producing an air flow sensor. Carbon fiber reinforced composite integration is carried out by scaling up the hydrothermal reaction to

  14. Methods for growth regulation of greenhouse produced ornamental pot- and bedding plants – a current review

    Directory of Open Access Journals (Sweden)

    Bergstrand Karl-Johan I.

    2017-06-01

    Full Text Available Chemical plant growth regulators (PGRs are used in the production of ornamental potted and bedding plants. Growth control is needed for maximizing production per unit area, reducing transportation costs and to obtain a desired visual quality. However, the use of PGRs is associated with toxicity risks to humans and the environment. In many countries the availability of PGRs is restricted as few substances are registered for use. A number of alternative methods have been suggested. The methods include genetic methods (breeding and crop cultivation practices such as fertigation, temperature and light management. A lot of research into “alternative” growth regulation was performed during the 1980-1990s, revealing several possible ways of using different climatic factors to optimize plant growth with respect to plant height. In recent years, the interest in climatic growth regulation has been resurrected, not least due to the coming phase-out of the plant growth regulator chlormequat chloride (CCC. Today, authorities in many countries are aiming towards reducing the use of agrochemicals. At the same time, there is a strong demand from consumers for products produced without chemicals. This article provides a broad overview of available methods for non-chemical growth control. It is concluded that a combination of plant breeding and management of temperature, fertigation and light management has the potential of replacing chemical growth regulators in the commercial production of ornamental pot- and bedding plants.

  15. Correct software in web applications and web services

    CERN Document Server

    Thalheim, Bernhard; Prinz, Andreas; Buchberger, Bruno

    2015-01-01

    The papers in this volume aim at obtaining a common understanding of the challenging research questions in web applications comprising web information systems, web services, and web interoperability; obtaining a common understanding of verification needs in web applications; achieving a common understanding of the available rigorous approaches to system development, and the cases in which they have succeeded; identifying how rigorous software engineering methods can be exploited to develop suitable web applications; and at developing a European-scale research agenda combining theory, methods a

  16. SEMANTIC WEB MINING: ISSUES AND CHALLENGES

    OpenAIRE

    Karan Singh*, Anil kumar, Arun Kumar Yadav

    2016-01-01

    The combination of the two fast evolving scientific research areas “Semantic Web” and “Web Mining” are well-known as “Semantic Web Mining” in computer science. These two areas cover way for the mining of related and meaningful information from the web, by this means giving growth to the term “Semantic Web Mining”. The “Semantic Web” makes mining easy and “Web Mining” can construct new structure of Web. Web Mining applies Data Mining technique on web content, Structure and Usage. This paper gi...

  17. GePb Alloy Growth Using Layer Inversion Method

    Science.gov (United States)

    Alahmad, Hakimah; Mosleh, Aboozar; Alher, Murtadha; Banihashemian, Seyedeh Fahimeh; Ghetmiri, Seyed Amir; Al-Kabi, Sattar; Du, Wei; Li, Bauhoa; Yu, Shui-Qing; Naseem, Hameed A.

    2018-04-01

    Germanium-lead films have been investigated as a new direct-bandgap group IV alloy. GePb films were deposited on Si via thermal evaporation of Ge and Pb solid sources using the layer inversion metal-induced crystallization method for comparison with the current laser-induced recrystallization method. Material characterization of the films using x-ray diffraction analysis revealed highly oriented crystallinity and Pb incorporation as high as 13.5% before and 5.2% after annealing. Transmission electron microscopy, scanning electron microscopy, and energy-dispersive x-ray mapping of the samples revealed uniform incorporation of elements and complete layer inversion. Optical characterization of the GePb films by Raman spectroscopy and photoluminescence techniques showed that annealing the samples resulted in higher crystalline quality as well as bandgap reduction. The bandgap reduction from 0.67 eV to 0.547 eV observed for the highest-quality material confirms the achievement of a direct-bandgap material.

  18. GePb Alloy Growth Using Layer Inversion Method

    Science.gov (United States)

    Alahmad, Hakimah; Mosleh, Aboozar; Alher, Murtadha; Banihashemian, Seyedeh Fahimeh; Ghetmiri, Seyed Amir; Al-Kabi, Sattar; Du, Wei; Li, Bauhoa; Yu, Shui-Qing; Naseem, Hameed A.

    2018-07-01

    Germanium-lead films have been investigated as a new direct-bandgap group IV alloy. GePb films were deposited on Si via thermal evaporation of Ge and Pb solid sources using the layer inversion metal-induced crystallization method for comparison with the current laser-induced recrystallization method. Material characterization of the films using x-ray diffraction analysis revealed highly oriented crystallinity and Pb incorporation as high as 13.5% before and 5.2% after annealing. Transmission electron microscopy, scanning electron microscopy, and energy-dispersive x-ray mapping of the samples revealed uniform incorporation of elements and complete layer inversion. Optical characterization of the GePb films by Raman spectroscopy and photoluminescence techniques showed that annealing the samples resulted in higher crystalline quality as well as bandgap reduction. The bandgap reduction from 0.67 eV to 0.547 eV observed for the highest-quality material confirms the achievement of a direct-bandgap material.

  19. New evaluation method of crack growth in SiC/SiC composites using interface elements

    International Nuclear Information System (INIS)

    Serizawa, H.; Ando, M.; Lewinsohn, C.A.; Murakawa, H.

    2000-01-01

    Crack propagation behavior in SiC/SiC composites was analyzed using a new computer simulation method that included time-dependent interface elements. The simulation method was used to describe the time-dependent crack growth in SiC/SiC composites under four-point bending of single-edge-notched beam bend-bars. Two methods were used to simulate time-dependent crack growth in SiC/SiC composites due to fiber creep. In one method, the creep property was introduced into the interface elements by the general method of finite element method (FEM) analysis. In the second method, a new technique making the best use of the potential function was used to represent crack closure tractions due to creeping fibers. The stage-II slow crack growth of a general creep deformation was simulated by both methods. Additionally, stage-III crack growth and the transition from stage-II to stage-III could be simulated by the new method. The new method has the potential to completely simulate time-dependent crack growth behavior in SiC/SiC composites due to fiber creep

  20. Study of growth of polyaniline chain by EPR method

    Energy Technology Data Exchange (ETDEWEB)

    Kulikov, A V [Inst. of Chemical Physics, Chernogolovka (Russian Federation); Kogan, Ya L [Inst. of Chemical Physics, Chernogolovka (Russian Federation); Fokeeva, L S [Inst. of Chemical Physics, Chernogolovka (Russian Federation)

    1993-03-22

    Chemical aniline polymerization has been studied by the EPR method. After a long delay a weak EPR signal I is appeared and transformed rapidly into a strong Lorentzian line. Constants of spin exchange of signals I and II with paramagnetic probes Fe(CN)[sub 6][sup 3-], Co[sup 2+] and O[sub 2], freely diffusing in solution, have been determined. Effect of ferricyanide ions and urea, a breaker of hydrogen bonds, has been measured for signals I and II. Data obtained show the formation of an array of positive charges in PANI at early stage of doping. Constants of spin exchange depend on prehistory of samples. Averaging of EPR line widths of different paramagnetic centers in polyaniline was found. (orig.)

  1. Self-assembling peptide amphiphiles and related methods for growth factor delivery

    Science.gov (United States)

    Stupp, Samuel I [Chicago, IL; Donners, Jack J. J. M.; Silva, Gabriel A [Chicago, IL; Behanna, Heather A [Chicago, IL; Anthony, Shawn G [New Stanton, PA

    2009-06-09

    Amphiphilic peptide compounds comprising one or more epitope sequences for binding interaction with one or more corresponding growth factors, micellar assemblies of such compounds and related methods of use.

  2. ArrayMining: a modular web-application for microarray analysis combining ensemble and consensus methods with cross-study normalization

    Directory of Open Access Journals (Sweden)

    Krasnogor Natalio

    2009-10-01

    Full Text Available Abstract Background Statistical analysis of DNA microarray data provides a valuable diagnostic tool for the investigation of genetic components of diseases. To take advantage of the multitude of available data sets and analysis methods, it is desirable to combine both different algorithms and data from different studies. Applying ensemble learning, consensus clustering and cross-study normalization methods for this purpose in an almost fully automated process and linking different analysis modules together under a single interface would simplify many microarray analysis tasks. Results We present ArrayMining.net, a web-application for microarray analysis that provides easy access to a wide choice of feature selection, clustering, prediction, gene set analysis and cross-study normalization methods. In contrast to other microarray-related web-tools, multiple algorithms and data sets for an analysis task can be combined using ensemble feature selection, ensemble prediction, consensus clustering and cross-platform data integration. By interlinking different analysis tools in a modular fashion, new exploratory routes become available, e.g. ensemble sample classification using features obtained from a gene set analysis and data from multiple studies. The analysis is further simplified by automatic parameter selection mechanisms and linkage to web tools and databases for functional annotation and literature mining. Conclusion ArrayMining.net is a free web-application for microarray analysis combining a broad choice of algorithms based on ensemble and consensus methods, using automatic parameter selection and integration with annotation databases.

  3. Instruction via Web-Based Modules in Early Childhood Personnel Preparation: A Mixed-Methods Study of Effectiveness and Learner Perspectives

    Science.gov (United States)

    Hollingsworth, Heidi L.; Lim, Chih-Ing

    2015-01-01

    Effective personnel preparation is critical to the development of a high quality early childhood workforce that provides optimal care and education for young children. This mixed-methods study examined the effectiveness of, and learner perspectives on, instruction via web-based modules within face-to-face early childhood personnel preparation…

  4. Growth of magnetite films by a hydrogel method

    Energy Technology Data Exchange (ETDEWEB)

    Velásquez, A.A., E-mail: avelas26@eafit.edu.edu.co [Grupo de Electromagnetismo Aplicado, Universidad EAFIT, A.A. 3300, Medellín (Colombia); Marín, C.C. [Grupo de Electromagnetismo Aplicado, Universidad EAFIT, A.A. 3300, Medellín (Colombia); Urquijo, J.P. [Grupo de Estado Sólido, Instituto de Física, Universidad de Antioquia, A.A. 1226, Medellín (Colombia)

    2017-06-15

    Magnetite (Fe{sub 3}O{sub 4}) films were grown on glass substrates by formation and condensation of complex of iron oxides in an agarose hydrogel. The obtained films were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Room Temperature Mössbauer Spectroscopy (TMS), Vibrating Sample Magnetometry (VSM), Atomic Force Microscopy (AFM) and Voltage vs. Current measurements by the four-point method. FTIR and TGA measurements showed that some polymer chains of agarose remain linked to the surface of the magnetic particles of the films after heat treatment. SEM measurements showed that the films are composed by quasi spherical particles with sizes around 55 nm. Mössbauer spectroscopy measurements showed two sextets with broaden lines, which were assigned to magnetite with a distributed particle size, and two doublets, which were assigned to superparamagnetic phases of magnetite. For the specific dimensions of the films prepared, measurements of Voltage vs. Current showed an ohmic behavior for currents between 0 and 200 nA, with a resistance of 355 kΩ.

  5. Growth of magnetite films by a hydrogel method

    International Nuclear Information System (INIS)

    Velásquez, A.A.; Marín, C.C.; Urquijo, J.P.

    2017-01-01

    Magnetite (Fe 3 O 4 ) films were grown on glass substrates by formation and condensation of complex of iron oxides in an agarose hydrogel. The obtained films were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Room Temperature Mössbauer Spectroscopy (TMS), Vibrating Sample Magnetometry (VSM), Atomic Force Microscopy (AFM) and Voltage vs. Current measurements by the four-point method. FTIR and TGA measurements showed that some polymer chains of agarose remain linked to the surface of the magnetic particles of the films after heat treatment. SEM measurements showed that the films are composed by quasi spherical particles with sizes around 55 nm. Mössbauer spectroscopy measurements showed two sextets with broaden lines, which were assigned to magnetite with a distributed particle size, and two doublets, which were assigned to superparamagnetic phases of magnetite. For the specific dimensions of the films prepared, measurements of Voltage vs. Current showed an ohmic behavior for currents between 0 and 200 nA, with a resistance of 355 kΩ.

  6. Influence of Plant Growth Regulators (PGRs and Planting Method on Growth and Yield in Oil Pumpkin (Cucurbita pepo var. styriaca

    Directory of Open Access Journals (Sweden)

    Shirzad SURE

    2012-05-01

    Full Text Available The effect of plant growth regulators IBA (indole butyric acid, GA3 (gibberellin and ethylene (as ethephon in two methods of planting was investigated (each method was considered as a separate experiment on morphological characters and yield of medicinal pumpkin. The experiments were carried out in a factorial trial based on completely randomized block design, with four replicates. The treatments were combined with priming and spraying with the above PGRs. The first seed priming with control (water, IBA 100 ppm, GA3 25 ppm and ethephon 200 ppm, and when seedling developed to 4 leaf stage sprayed there with control (water, IBA 100 ppm, GA3 25 ppm and ethephon 200 ppm for three times. In both planting methods, there were all of these treatments. The result showed that PGRs and planting method had significant effects on vegetative, flowering and yield characteristics including: leaf area %DM plant, number of male and female flowers per plant, number of fruit/plant, fruits fresh weight, seeds length and width, number of seed per fruit, seed yield, % seeds oil and oil yield. Hence spraying with GA3 25 ppm in four leaf stage at trellis method could be a suitable treatment for enhancing growth and yield of medicinal pumpkin.

  7. Isothermal microcalorimetry - A quantitative method to monitor Trypanosoma congolense growth and growth inhibition by trypanocidal drugs in real time.

    Science.gov (United States)

    Gysin, M; Braissant, O; Gillingwater, K; Brun, R; Mäser, P; Wenzler, T

    2018-03-16

    Trypanosoma congolense is a protozoan parasite that is transmitted by tsetse flies, causing African Animal Trypanosomiasis, also known as Nagana, in sub-Saharan Africa. Nagana is a fatal disease of livestock that causes severe economic losses. Two drugs are available, diminazene and isometamidium, yet successful treatment is jeopardized by drug resistant T. congolense. Isothermal microcalorimetry is a highly sensitive tool that can be used to study growth of the extracellular T. congolense parasites or to study parasite growth inhibition after the addition of antitrypanosomal drugs. Time of drug action and time to kill can be quantified in a simple way by real time heat flow measurements. We established a robust protocol for the microcalorimetric studies of T. congolense and developed mathematical computations in R to calculate different parameters related to growth and the kinetics of drug action. We demonstrate the feasibility and benefit of the method exemplary with the two standard drugs, diminazene aceturate and isometamidium chloride. The method and the mathematical approach can be translated to study other pathogenic or non-pathogenic cells if they are metabolically active and grow under axenic conditions. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. The Potential of Web-based Interventions for Heart Disease Self-Management: A Mixed Methods Investigation

    OpenAIRE

    Kerr, C.; Murray, E.; Noble, L.; Morris, R.; Bottomley, C.; Stevenson, F.; Patterson, D.; Peacock, R.; Turner, I.; Jackson, K.; Nazareth, I.

    2010-01-01

    Background: Existing initiatives to support patient self-management of heart disease do not appear to be reaching patients most in need. Providing self-management programs over the Internet (web-based interventions) might help reduce health disparities by reaching a greater number of patients. However, it is unclear whether they can achieve this goal and whether their effectiveness might be limited by the digital divide.Objective: To explore the effectiveness of a web-based intervention in de...

  9. The Potential of Web-based Interventions for Heart Disease Self-Management: A Mixed Methods Investigation

    OpenAIRE

    Kerr, Cicely; Murray, Elizabeth; Noble, Lorraine; Morris, Richard; Bottomley, Christian; Stevenson, Fiona; Patterson, David; Peacock, Richard; Turner, Indra; Jackson, Keith; Nazareth, Irwin

    2010-01-01

    Background: Existing initiatives to support patient self-management of heart disease do not appear to be reaching patients most in need. Providing self-management programs over the Internet (web-based interventions) might help reduce health disparities by reaching a greater number of patients. However, it is unclear whether they can achieve this goal and whether their effectiveness might be limited by the digital divide. Objective: To explore the effectiveness of a web-based intervention in d...

  10. Cellular Automaton Modeling of Dendritic Growth Using a Multi-grid Method

    International Nuclear Information System (INIS)

    Natsume, Y; Ohsasa, K

    2015-01-01

    A two-dimensional cellular automaton model with a multi-grid method was developed to simulate dendritic growth. In the present model, we used a triple-grid system for temperature, solute concentration and solid fraction fields as a new approach of the multi-grid method. In order to evaluate the validity of the present model, we carried out simulations of single dendritic growth, secondary dendrite arm growth, multi-columnar dendritic growth and multi-equiaxed dendritic growth. From the results of the grid dependency from the simulation of single dendritic growth, we confirmed that the larger grid can be used in the simulation and that the computational time can be reduced dramatically. In the simulation of secondary dendrite arm growth, the results from the present model were in good agreement with the experimental data and the simulated results from a phase-field model. Thus, the present model can quantitatively simulate dendritic growth. From the simulated results of multi-columnar and multi-equiaxed dendrites, we confirmed that the present model can perform simulations under practical solidification conditions. (paper)

  11. [A reliability growth assessment method and its application in the development of equipment in space cabin].

    Science.gov (United States)

    Chen, J D; Sun, H L

    1999-04-01

    Objective. To assess and predict reliability of an equipment dynamically by making full use of various test informations in the development of products. Method. A new reliability growth assessment method based on army material system analysis activity (AMSAA) model was developed. The method is composed of the AMSAA model and test data conversion technology. Result. The assessment and prediction results of a space-borne equipment conform to its expectations. Conclusion. It is suggested that this method should be further researched and popularized.

  12. Methods and Measures: Growth Mixture Modeling--A Method for Identifying Differences in Longitudinal Change among Unobserved Groups

    Science.gov (United States)

    Ram, Nilam; Grimm, Kevin J.

    2009-01-01

    Growth mixture modeling (GMM) is a method for identifying multiple unobserved sub-populations, describing longitudinal change within each unobserved sub-population, and examining differences in change among unobserved sub-populations. We provide a practical primer that may be useful for researchers beginning to incorporate GMM analysis into their…

  13. Web archives

    DEFF Research Database (Denmark)

    Finnemann, Niels Ole

    2018-01-01

    This article deals with general web archives and the principles for selection of materials to be preserved. It opens with a brief overview of reasons why general web archives are needed. Section two and three present major, long termed web archive initiatives and discuss the purposes and possible...... values of web archives and asks how to meet unknown future needs, demands and concerns. Section four analyses three main principles in contemporary web archiving strategies, topic centric, domain centric and time-centric archiving strategies and section five discuss how to combine these to provide...... a broad and rich archive. Section six is concerned with inherent limitations and why web archives are always flawed. The last sections deal with the question how web archives may fit into the rapidly expanding, but fragmented landscape of digital repositories taking care of various parts...

  14. Effectiveness of the cervical vertebral maturation method to predict postpeak circumpubertal growth of craniofacial structures.

    NARCIS (Netherlands)

    Fudalej, P.S.; Bollen, A.M.

    2010-01-01

    INTRODUCTION: Our aim was to assess effectiveness of the cervical vertebral maturation (CVM) method to predict circumpubertal craniofacial growth in the postpeak period. METHODS: The CVM stage was determined in 176 subjects (51 adolescent boys and 125 adolescent girls) on cephalograms taken at the

  15. A new method for high yield purification of type beta transforming growth factor from human platelets

    NARCIS (Netherlands)

    Eijnden-van Raaij, A.J.M. van den; Koornneef, I.; Zoelen, E.J.J. van

    1988-01-01

    A new method was developed for the purification of type beta transforming growth factor from human platelets. This method is a three-step procedure including gel filtration, weak cation exchange HPLC and reverse phase HPLC. All steps are carried out at low pH using exclusively volatile acidic buffer

  16. Cervical vertebral maturation method and mandibular growth peak: a longitudinal study of diagnostic reliability.

    Science.gov (United States)

    Perinetti, Giuseppe; Primozic, Jasmina; Sharma, Bhavna; Cioffi, Iacopo; Contardo, Luca

    2018-03-28

    The capability of the cervical vertebral maturation (CVM) method in the identification of the mandibular growth peak on an individual basis remains undetermined. The diagnostic reliability of the six-stage CVM method in the identification of the mandibular growth peak was thus investigated. From the files of the Oregon and Burlington Growth Studies (data obtained between early 1950s and middle 1970s), 50 subjects (26 females, 24 males) with at least seven annual lateral cephalograms taken from 9 to 16 years were identified. Cervical vertebral maturation was assessed according to the CVM code staging system, and mandibular growth was defined as annual increments in Co-Gn distance. A diagnostic reliability analysis was carried out to establish the capability of the circumpubertal CVM stages 2, 3, and 4 in the identification of the imminent mandibular growth peak. Variable durations of each of the CVM stages 2, 3, and 4 were seen. The overall diagnostic accuracy values for the CVM stages 2, 3, and 4 were 0.70, 0.76, and 0.77, respectively. These low values appeared to be due to false positive cases. Secular trends in conjunction with the use of a discrete staging system. In most of the Burlington Growth Study sample, the lateral head film at age 15 was missing. None of the CVM stages 2, 3, and 4 reached a satisfactorily diagnostic reliability in the identification of imminent mandibular growth peak.

  17. Using Qualitative Methods to Create a Home Health Web Application User Interface for Patients with Low Computer Proficiency.

    Science.gov (United States)

    Baier, Rosa R; Cooper, Emily; Wysocki, Andrea; Gravenstein, Stefan; Clark, Melissa

    2015-01-01

    Despite the investment in public reporting for a number of healthcare settings, evidence indicates that consumers do not routinely use available data to select providers. This suggests that existing reports do not adequately incorporate recommendations for consumer-facing reports or web applications. Healthcentric Advisors and Brown University undertook a multi-phased approach to create a consumer-facing home health web application in Rhode Island. This included reviewing the evidence base review to identify design recommendations and then creating a paper prototype and wireframe. We performed qualitative research to iteratively test our proposed user interface with two user groups, home health consumers and hospital case managers, refining our design to create the final web application. To test our prototype, we conducted two focus groups, with a total of 13 consumers, and 28 case manager interviews. Both user groups responded favorably to the prototype, with the majority commenting that they felt this type of tool would be useful. Case managers suggested revisions to ensure the application conformed to laws requiring Medicare patients to have the freedom to choose among providers and could be incorporated into hospital workflow. After incorporating changes and creating the wireframe, we conducted usability testing interviews with 14 home health consumers and six hospital case managers. We found that consumers needed prompting to navigate through the wireframe; they demonstrated confusion through both their words and body language. As a result, we modified the web application's sequence, navigation, and function to provide additional instructions and prompts. Although we designed our web application for low literacy and low health literacy, using recommendations from the evidence base, we overestimated the extent to which older adults were familiar with using computers. Some of our key learnings and recommendations run counter to general web design principles

  18. A Method for Upper Bounding Long Term Growth of Network Access Speed

    Directory of Open Access Journals (Sweden)

    Thomas Phillip Knudsen

    2006-06-01

    Full Text Available The development in home Internet access speed has shown an exponential development with growth rates averaging 25% per year. For resource management in network provisioning it becomes an urgent question how long such growth can continue. This paper presents a method for calculating an upper bound to visual content driven growth, proceeding from datarate requirements for a full virtual environment. Scenarios and approaches for reducing datarate requirements are considered and discussed. The presented figures for an upper bound on network access speed are discussed and perspectives on further research presented.

  19. A Method for Upper Bounding Long Term Growth of Network Access Speed

    DEFF Research Database (Denmark)

    Knudsen, Thomas Phillip; Pedersen, Jens Myrup; Madsen, Ole Brun

    2004-01-01

    The development in home Internet access speed has shown an exponential development with growth rates averaging 25% per year. For resource management in network provisioning it becomes an urgent question how long such growth can continue. This paper presents a method for calculating an upper bound...... to visual content driven growth, proceeding from datarate requirements for a full virtual environment. Scenarios and approaches for reducing datarate requirements are considered and discussed. The presented figures for an upper bound on network access speed are discussed and perspectives on further research...

  20. Researching Seeds: Films, Sanitation Methods, Microbiological Growth, Viability, and Selection for New Crops

    Science.gov (United States)

    Padgett, Niki; Smith, Trent

    2018-01-01

    A major factor in long-term human exploration of the solar system is crop growth in microgravity. Space crops can provide fresh, nutritious food to supplement diets for astronauts. Important factors impacting space plant growth and consumption are water delivery to root zone in microgravity, sanitation methods for microbiological safety, plant responses to light quality/spectrum, and identifying optimal edible plants suitable for growth on the International Space Station (ISS). Astronauts growing their own food on the ISS provides necessary data for crop production for long duration deep space missions. The seed film project can be used in Advanced Plant Habitat and Veggies that are currently being utilized on the ISS.

  1. An Eulerian-Lagrangian finite-element method for modeling crack growth in creeping materials

    International Nuclear Information System (INIS)

    Lee Hae Sung.

    1991-01-01

    This study is concerned with the development of finite-element-solution methods for analysis of quasi-static, ductile crack growth in history-dependent materials. The mixed Eulerian-Langrangian description (ELD) kinematic model is shown to have several desirable properties for modeling inelastic crack growth. Accordingly, a variational statement based on the ELD for history-dependent materials is developed, and a new moving-grid finite-element method based on the variational statement is presented. The moving-grid finite-element method based on the variational statement is presented. The moving-grid finite-element method is applied to the analysis of transient, quasi-static, mode-III crack growth in creeping materials. A generalized Petrov-Galerkin method (GPG) is developed that simultaneously stabilizes the statement to admit L 2 basis functions for the nonlinear strain field. Quasi-static, model-III crack growth in creeping materials under small-scale-yielding (SSY) conditions is considered. The GPG/ELD moving-grid finite-element formulation is used to model a transient crack-growth problem. The GPG/ELD results compare favorably with previously-published numerical results and the asymptotic solutions

  2. Applications and methods utilizing the Simple Semantic Web Architecture and Protocol (SSWAP for bioinformatics resource discovery and disparate data and service integration

    Directory of Open Access Journals (Sweden)

    Nelson Rex T

    2010-06-01

    Full Text Available Abstract Background Scientific data integration and computational service discovery are challenges for the bioinformatic community. This process is made more difficult by the separate and independent construction of biological databases, which makes the exchange of data between information resources difficult and labor intensive. A recently described semantic web protocol, the Simple Semantic Web Architecture and Protocol (SSWAP; pronounced "swap" offers the ability to describe data and services in a semantically meaningful way. We report how three major information resources (Gramene, SoyBase and the Legume Information System [LIS] used SSWAP to semantically describe selected data and web services. Methods We selected high-priority Quantitative Trait Locus (QTL, genomic mapping, trait, phenotypic, and sequence data and associated services such as BLAST for publication, data retrieval, and service invocation via semantic web services. Data and services were mapped to concepts and categories as implemented in legacy and de novo community ontologies. We used SSWAP to express these offerings in OWL Web Ontology Language (OWL, Resource Description Framework (RDF and eXtensible Markup Language (XML documents, which are appropriate for their semantic discovery and retrieval. We implemented SSWAP services to respond to web queries and return data. These services are registered with the SSWAP Discovery Server and are available for semantic discovery at http://sswap.info. Results A total of ten services delivering QTL information from Gramene were created. From SoyBase, we created six services delivering information about soybean QTLs, and seven services delivering genetic locus information. For LIS we constructed three services, two of which allow the retrieval of DNA and RNA FASTA sequences with the third service providing nucleic acid sequence comparison capability (BLAST. Conclusions The need for semantic integration technologies has preceded

  3. Distributed Web Service Repository

    Directory of Open Access Journals (Sweden)

    Piotr Nawrocki

    2015-01-01

    Full Text Available The increasing availability and popularity of computer systems has resulted in a demand for new, language- and platform-independent ways of data exchange. That demand has in turn led to a significant growth in the importance of systems based on Web services. Alongside the growing number of systems accessible via Web services came the need for specialized data repositories that could offer effective means of searching of available services. The development of mobile systems and wireless data transmission technologies has allowed the use of distributed devices and computer systems on a greater scale. The accelerating growth of distributed systems might be a good reason to consider the development of distributed Web service repositories with built-in mechanisms for data migration and synchronization.

  4. Homogeneous SiGe crystal growth in microgravity by the travelling liquidus-zone method

    International Nuclear Information System (INIS)

    Kinoshita, K; Arai, Y; Inatomi, Y; Sakata, K; Takayanagi, M; Yoda, S; Miyata, H; Tanaka, R; Sone, T; Yoshikawa, J; Kihara, T; Shibayama, H; Kubota, Y; Shimaoka, T; Warashina, Y

    2011-01-01

    Homogeneous SiGe crystal growth experiments will be performed on board the ISS 'Kibo' using a gradient heating furnace (GHF). A new crystal growth method invented for growing homogeneous mixed crystals named 'travelling liquidus-zone (TLZ) method' is evaluated by the growth of Si 0.5 Ge 0.5 crystals in space. We have already succeeded in growing homogeneous 2mm diameter Si 0.5 Ge 0.5 crystals on the ground but large diameter homogeneous crystals are difficult to be grown due to convection in a melt. In microgravity, larger diameter crystals can be grown with suppressing convection. Radial concentration profiles as well as axial profiles in microgravity grown crystals will be measured and will be compared with our two-dimensional TLZ growth model equation and compositional variation is analyzed. Results are beneficial for growing large diameter mixed crystals by the TLZ method on the ground. Here, we report on the principle of the TLZ method for homogeneous crystal growth, results of preparatory experiments on the ground and plan for microgravity experiments.

  5. Spinning the web of knowledge

    CERN Multimedia

    Knight, Matthew

    2007-01-01

    "On August 6, 1991, Tim Berners-Lee posted the World Wide Web's first Web site. Fifteen years on there are estimated to be over 100 million. The space of growth has happened at a bewildering rate and its success has even confounded its inventor." (1/2 page)

  6. Designing Health Websites Based on Users’ Web-Based Information-Seeking Behaviors: A Mixed-Method Observational Study

    Science.gov (United States)

    Pang, Patrick Cheong-Iao; Verspoor, Karin; Pearce, Jon

    2016-01-01

    Background Laypeople increasingly use the Internet as a source of health information, but finding and discovering the right information remains problematic. These issues are partially due to the mismatch between the design of consumer health websites and the needs of health information seekers, particularly the lack of support for “exploring” health information. Objective The aim of this research was to create a design for consumer health websites by supporting different health information–seeking behaviors. We created a website called Better Health Explorer with the new design. Through the evaluation of this new design, we derive design implications for future implementations. Methods Better Health Explorer was designed using a user-centered approach. The design was implemented and assessed through a laboratory-based observational study. Participants tried to use Better Health Explorer and another live health website. Both websites contained the same content. A mixed-method approach was adopted to analyze multiple types of data collected in the experiment, including screen recordings, activity logs, Web browsing histories, and audiotaped interviews. Results Overall, 31 participants took part in the observational study. Our new design showed a positive result for improving the experience of health information seeking, by providing a wide range of information and an engaging environment. The results showed better knowledge acquisition, a higher number of page reads, and more query reformulations in both focused and exploratory search tasks. In addition, participants spent more time to discover health information with our design in exploratory search tasks, indicating higher engagement with the website. Finally, we identify 4 design considerations for designing consumer health websites and health information–seeking apps: (1) providing a dynamic information scope; (2) supporting serendipity; (3) considering trust implications; and (4) enhancing interactivity

  7. Instructional methods and cognitive and learning styles in web-based learning: report of two randomised trials.

    Science.gov (United States)

    Cook, David A; Gelula, Mark H; Dupras, Denise M; Schwartz, Alan

    2007-09-01

    Adapting web-based (WB) instruction to learners' individual differences may enhance learning. Objectives This study aimed to investigate aptitude-treatment interactions between learning and cognitive styles and WB instructional methods. We carried out a factorial, randomised, controlled, crossover, post-test-only trial involving 89 internal medicine residents, family practice residents and medical students at 2 US medical schools. Parallel versions of a WB course in complementary medicine used either active or reflective questions and different end-of-module review activities ('create and study a summary table' or 'study an instructor-created table'). Participants were matched or mismatched to question type based on active or reflective learning style. Participants used each review activity for 1 course module (crossover design). Outcome measurements included the Index of Learning Styles, the Cognitive Styles Analysis test, knowledge post-test, course rating and preference. Post-test scores were similar for matched (mean +/- standard error of the mean 77.4 +/- 1.7) and mismatched (76.9 +/- 1.7) learners (95% confidence interval [CI] for difference - 4.3 to 5.2l, P = 0.84), as were course ratings (P = 0.16). Post-test scores did not differ between active-type questions (77.1 +/- 2.1) and reflective-type questions (77.2 +/- 1.4; P = 0.97). Post-test scores correlated with course ratings (r = 0.45). There was no difference in post-test subscores for modules completed using the 'construct table' format (78.1 +/- 1.4) or the 'table provided' format (76.1 +/- 1.4; CI - 1.1 to 5.0, P = 0.21), and wholist and analytic styles had no interaction (P = 0.75) or main effect (P = 0.18). There was no association between activity preference and wholist or analytic scores (P = 0.37). Cognitive and learning styles had no apparent influence on learning outcomes. There were no differences in outcome between these instructional methods.

  8. Extraction of solubles from plant biomass for use as microbial growth stimulant and methods related thereto

    Energy Technology Data Exchange (ETDEWEB)

    Lau, Ming Woei

    2015-12-08

    A method for producing a microbial growth stimulant (MGS) from a plant biomass is described. In one embodiment, an ammonium hydroxide solution is used to extract a solution of proteins and ammonia from the biomass. Some of the proteins and ammonia are separated from the extracted solution to provide the MGS solution. The removed ammonia can be recycled and the proteins are useful as animal feeds. In one embodiment, the method comprises extracting solubles from pretreated lignocellulosic biomass with a cellulase enzyme-producing growth medium (such T. reesei) in the presence of water and an aqueous extract.

  9. Improved Growth Methods for LaBr3 Scintillation Radiation Detectors

    International Nuclear Information System (INIS)

    McGregor, Douglas S.

    2011-01-01

    The objective is to develop advanced materials for deployment as high-resolution gamma ray detectors. Both LaBr3 and CeBr3 are advanced scintillation materials, and will be studied in this research. Prototype devices, in collaboration Sandia National Laboratories, will be demonstrated along with recommendations for mass production and deployment. It is anticipated that improved methods of crystal growth will yield larger single crystals of LaBr3 for deployable room-temperature operated gamma radiation spectrometers. The growth methods will be characterized. The LaBr3 and CeBr3 scintillation crystals will be characterized for light yield, spectral resolution, and for hardness.

  10. Standard test method for measurement of creep crack growth times in metals

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This test method covers the determination of creep crack growth (CCG) in metals at elevated temperatures using pre-cracked specimens subjected to static or quasi-static loading conditions. The time (CCI), t0.2 to an initial crack extension δai = 0.2 mm from the onset of first applied force and creep crack growth rate, ˙a or da/dt is expressed in terms of the magnitude of creep crack growth relating parameters, C* or K. With C* defined as the steady state determination of the crack tip stresses derived in principal from C*(t) and Ct (1-14). The crack growth derived in this manner is identified as a material property which can be used in modeling and life assessment methods (15-25). 1.1.1 The choice of the crack growth correlating parameter C*, C*(t), Ct, or K depends on the material creep properties, geometry and size of the specimen. Two types of material behavior are generally observed during creep crack growth tests; creep-ductile (1-14) and creep-brittle (26-37). In creep ductile materials, where cr...

  11. IL web tutorials

    DEFF Research Database (Denmark)

    Hyldegård, Jette; Lund, Haakon

    2012-01-01

    The paper presents the results from a study on information literacy in a higher education (HE) context based on a larger research project evaluating 3 Norwegian IL web tutorials at 6 universities and colleges in Norway. The aim was to evaluate how the 3 web tutorials served students’ information...... seeking and writing process in an study context and to identify barriers to the employment and use of the IL web tutorials, hence to the underlying information literacy intentions by the developer. Both qualitative and quantitative methods were employed. A clear mismatch was found between intention...... and use of the web tutorials. In addition, usability only played a minor role compared to relevance. It is concluded that the positive expectations of the IL web tutorials tend to be overrated by the developers. Suggestions for further research are presented....

  12. Web Dynpro ABAP for practitioners

    CERN Document Server

    Gellert, Ulrich

    2013-01-01

    Web Dynpro ABAP, a NetWeaver web application user interface tool from SAP, enables web programming connected to SAP Systems. The authors' main focus was to create a book based on their own practical experience. Each chapter includes examples which lead through the content step-by-step and enable the reader to gradually explore and grasp the Web Dynpro ABAP process. The authors explain in particular how to design Web Dynpro components, the data binding and interface methods, and the view controller methods. They also describe the other SAP NetWeaver Elements (ABAP Dictionary, Authorization) and

  13. Single-crystal growth of Group IVB and VB carbides by the floating-zone method

    International Nuclear Information System (INIS)

    Finch, C.B.; Chang, Y.K.; Abraham, M.M.

    1989-02-01

    The floating-zone method for the growth of Group IVB and VB carbides is described and reviewed. We have systematically investigated the technique and confirmed the growth of large single crystals of TiC/sub 0.95/, ZrC/sub 0.93/, ZrC/sub 0.98/, VC/sub 0.80/, NbC/sub 0.95/, TaC/sub 0.89/. Optimal growth conditions were in the 0.5-2.0 cm/h range under 8-12 atm helium. Good crystal growth results were achieved with hot-pressed starting rods of 90-95% density, using a ''double pancake'' induction coil and a 200-kHz/100- kW rf power supply. 36 refs., 5 figs., 3 tabs

  14. Evaluation of stable crack growth by using the finite element method

    International Nuclear Information System (INIS)

    Saarenheimo, A.

    1996-01-01

    In the study the analysis of stable crack growth by using the finite element method is considered. The results of numerical analyses are compared with the corresponding experimental results. The applications are reported in three separate papers enclosed at the end of the work. The first paper deals with the numerical analysis of a full scale pressure vessel test. The second and the third paper concern numerical analyses of fracture mechanical test specimens. In the literature study section of the work basic theories of fracture mechanics and common crack growth criteria are presented. The balance equations needed are written based on thermodynamical considerations. Physical interpretations of the energy release rate are briefly considered. Numerical calculation methods for determining the J-integral values are presented. The virtual crack extension method is used in the numerical examples. Also the Domain integral method and its implementation in the finite element method are described. (orig.) (70 refs.)

  15. Web Engineering

    Energy Technology Data Exchange (ETDEWEB)

    White, Bebo

    2003-06-23

    Web Engineering is the application of systematic, disciplined and quantifiable approaches to development, operation, and maintenance of Web-based applications. It is both a pro-active approach and a growing collection of theoretical and empirical research in Web application development. This paper gives an overview of Web Engineering by addressing the questions: (a) why is it needed? (b) what is its domain of operation? (c) how does it help and what should it do to improve Web application development? and (d) how should it be incorporated in education and training? The paper discusses the significant differences that exist between Web applications and conventional software, the taxonomy of Web applications, the progress made so far and the research issues and experience of creating a specialization at the master's level. The paper reaches a conclusion that Web Engineering at this stage is a moving target since Web technologies are constantly evolving, making new types of applications possible, which in turn may require innovations in how they are built, deployed and maintained.

  16. An exploratory mixed-methods crossover study comparing DVD- vs. Web-based patient decision support in three conditions: The importance of patient perspectives.

    Science.gov (United States)

    Halley, Meghan C; Rendle, Katharine A S; Gillespie, Katherine A; Stanley, Katherine M; Frosch, Dominick L

    2015-12-01

    The last 15 years have witnessed considerable progress in the development of decision support interventions (DESIs). However, fundamental questions about design and format of delivery remain. An exploratory, randomized mixed-method crossover study was conducted to compare a DVD- and Web-based DESI. Randomized participants used either the Web or the DVD first, followed by the alternative format. Participants completed a questionnaire to assess decision-specific knowledge at baseline and a questionnaire and structured qualitative interview after viewing each format. Tracking software was used to capture Web utilization. Transcripts were analyzed using integrated inductive and deductive approaches. Quantitative data were analyzed using exploratory bivariate and multivariate analyses. Exploratory knowledge analyses suggest that both formats increased knowledge, with limited evidence that the DVD increased knowledge more than the Web. Format preference varied across participants: 44% preferred the Web, 32% preferred the DVD and 24% preferred 'both'. Patient discussions of preferences for DESI information structure and the importance of a patients' stage of a given decision suggest these characteristics may be important factors underlying variation in utilization, format preferences and knowledge outcomes. Our results suggest that both DESI formats effectively increase knowledge. Patients' perceptions of these two formats further suggest that there may be no single 'best' format for all patients. These results have important implications for understanding why different DESI formats might be preferable to and more effective for different patients. Further research is needed to explore the relationship between these factors and DESI utilization outcomes across diverse patient populations. © 2014 John Wiley & Sons Ltd.

  17. Designing Health Websites Based on Users' Web-Based Information-Seeking Behaviors: A Mixed-Method Observational Study.

    Science.gov (United States)

    Pang, Patrick Cheong-Iao; Chang, Shanton; Verspoor, Karin; Pearce, Jon

    2016-06-06

    Laypeople increasingly use the Internet as a source of health information, but finding and discovering the right information remains problematic. These issues are partially due to the mismatch between the design of consumer health websites and the needs of health information seekers, particularly the lack of support for "exploring" health information. The aim of this research was to create a design for consumer health websites by supporting different health information-seeking behaviors. We created a website called Better Health Explorer with the new design. Through the evaluation of this new design, we derive design implications for future implementations. Better Health Explorer was designed using a user-centered approach. The design was implemented and assessed through a laboratory-based observational study. Participants tried to use Better Health Explorer and another live health website. Both websites contained the same content. A mixed-method approach was adopted to analyze multiple types of data collected in the experiment, including screen recordings, activity logs, Web browsing histories, and audiotaped interviews. Overall, 31 participants took part in the observational study. Our new design showed a positive result for improving the experience of health information seeking, by providing a wide range of information and an engaging environment. The results showed better knowledge acquisition, a higher number of page reads, and more query reformulations in both focused and exploratory search tasks. In addition, participants spent more time to discover health information with our design in exploratory search tasks, indicating higher engagement with the website. Finally, we identify 4 design considerations for designing consumer health websites and health information-seeking apps: (1) providing a dynamic information scope; (2) supporting serendipity; (3) considering trust implications; and (4) enhancing interactivity. Better Health Explorer provides strong

  18. Complete Tangent Stiffness for eXtended Finite Element Method by including crack growth parameters

    DEFF Research Database (Denmark)

    Mougaard, J.F.; Poulsen, P.N.; Nielsen, L.O.

    2013-01-01

    the crack geometry parameters, such as the crack length and the crack direction directly in the virtual work formulation. For efficiency, it is essential to obtain a complete tangent stiffness. A new method in this work is presented to include an incremental form the crack growth parameters on equal terms......The eXtended Finite Element Method (XFEM) is a useful tool for modeling the growth of discrete cracks in structures made of concrete and other quasi‐brittle and brittle materials. However, in a standard application of XFEM, the tangent stiffness is not complete. This is a result of not including...... with the degrees of freedom in the FEM‐equations. The complete tangential stiffness matrix is based on the virtual work together with the constitutive conditions at the crack tip. Introducing the crack growth parameters as direct unknowns, both equilibrium equations and the crack tip criterion can be handled...

  19. Evaluation of Irrigation Methods for Highbush Blueberry. I. Growth and Water Requirements of Young Plants

    Science.gov (United States)

    A study was conducted in a new field of northern highbush blueberry (Vaccinium corymbosum L. 'Elliott') to determine the effects of different irrigation methods on growth and water requirements of uncropped plants during the first 2 years after planting. The plants were grown on mulched, raised beds...

  20. Deep iCrawl: An Intelligent Vision-Based Deep Web Crawler

    OpenAIRE

    R.Anita; V.Ganga Bharani; N.Nityanandam; Pradeep Kumar Sahoo

    2011-01-01

    The explosive growth of World Wide Web has posed a challenging problem in extracting relevant data. Traditional web crawlers focus only on the surface web while the deep web keeps expanding behind the scene. Deep web pages are created dynamically as a result of queries posed to specific web databases. The structure of the deep web pages makes it impossible for traditional web crawlers to access deep web contents. This paper, Deep iCrawl, gives a novel and vision-based app...

  1. Web 25

    DEFF Research Database (Denmark)

    the reader on an exciting time travel journey to learn more about the prehistory of the hyperlink, the birth of the Web, the spread of the early Web, and the Web’s introduction to the general public in mainstream media. Fur- thermore, case studies of blogs, literature, and traditional media going online...

  2. In ovo method for evaluating the effect of nutritional therapies on tumor development, growth and vascularization

    OpenAIRE

    Dupertuis, Yves M.; Delie, Florence; Cohen, Marie; Pichard, Claude

    2015-01-01

    In the state of the art evaluation of nutritional therapy on tumor development, growth and vascularization requires tedious and expensive in vivo assays in which a significant number of animals undergo invasive treatments. Therefore, new alternative methods to avoid animal suffering and sacrifice are welcome. This review presents a rapid and low-cost method of experimental radio/chemotherapy in tumor xenografted chicken chorioallantoic membrane (CAM), which may contribute to implement the 3R ...

  3. Web Page Recommendation Using Web Mining

    OpenAIRE

    Modraj Bhavsar; Mrs. P. M. Chavan

    2014-01-01

    On World Wide Web various kind of content are generated in huge amount, so to give relevant result to user web recommendation become important part of web application. On web different kind of web recommendation are made available to user every day that includes Image, Video, Audio, query suggestion and web page. In this paper we are aiming at providing framework for web page recommendation. 1) First we describe the basics of web mining, types of web mining. 2) Details of each...

  4. Non-Contact Plant Growth Measurement Method and System Based on Ubiquitous Sensor Network Technologies

    Directory of Open Access Journals (Sweden)

    Intae Ryoo

    2011-04-01

    Full Text Available This paper proposes a non-contact plant growth measurement system using infrared sensors based on the ubiquitous sensor network (USN technology. The proposed system measures plant growth parameters such as the stem radius of plants using real-time non-contact methods, and generates diameter, cross-sectional area and thickening form of plant stems using this measured data. Non-contact sensors have been used not to cause any damage to plants during measurement of the growth parameters. Once the growth parameters are measured, they are transmitted to a remote server using the sensor network technology and analyzed in the application program server. The analyzed data are then provided for administrators and a group of interested users. The proposed plant growth measurement system has been designed and implemented using fixed-type and rotary-type infrared sensor based measurement methods and devices. Finally, the system performance is compared and verified with the measurement data that have been obtained by practical field experiments.

  5. Comparison of growth methods and biological activities of brazilian marine Streptomyces

    Directory of Open Access Journals (Sweden)

    A. C. Granato

    2013-03-01

    Full Text Available The present work describes the study of the growth and the cytotoxic and antitumor activities of the extracts of the marine microorganisms Streptomyces acrymicini and Streptomyces cebimarensis, the latter a new strain. Both microorganisms were collected from coastal marine sediments of the north coast of São Paulo state. Growth was performed in a shaker and in a bioreactor using Gym medium and the broths of both microorganisms were extracted with ethyl acetate and n-butanol. Three extracts, two organic and one aqueous, from each microorganism were obtained and tested for cytotoxic and antitumor activity using the SF-295 (Central Nervous System, HCT-8 (Colon cell lines, and the MTT (3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide method. The growth methods were compared and show that, although the shaker presented reasonable results, the bioreactor represents the best choice for growth of these microorganisms. The biological activity of the different extracts was evaluated and it was demonstrated that the growth methodology may influence the secondary metabolite production and the biological activity.

  6. An efficient computational method for global sensitivity analysis and its application to tree growth modelling

    International Nuclear Information System (INIS)

    Wu, Qiong-Li; Cournède, Paul-Henry; Mathieu, Amélie

    2012-01-01

    Global sensitivity analysis has a key role to play in the design and parameterisation of functional–structural plant growth models which combine the description of plant structural development (organogenesis and geometry) and functional growth (biomass accumulation and allocation). We are particularly interested in this study in Sobol's method which decomposes the variance of the output of interest into terms due to individual parameters but also to interactions between parameters. Such information is crucial for systems with potentially high levels of non-linearity and interactions between processes, like plant growth. However, the computation of Sobol's indices relies on Monte Carlo sampling and re-sampling, whose costs can be very high, especially when model evaluation is also expensive, as for tree models. In this paper, we thus propose a new method to compute Sobol's indices inspired by Homma–Saltelli, which improves slightly their use of model evaluations, and then derive for this generic type of computational methods an estimator of the error estimation of sensitivity indices with respect to the sampling size. It allows the detailed control of the balance between accuracy and computing time. Numerical tests on a simple non-linear model are convincing and the method is finally applied to a functional–structural model of tree growth, GreenLab, whose particularity is the strong level of interaction between plant functioning and organogenesis. - Highlights: ► We study global sensitivity analysis in the context of functional–structural plant modelling. ► A new estimator based on Homma–Saltelli method is proposed to compute Sobol indices, based on a more balanced re-sampling strategy. ► The estimation accuracy of sensitivity indices for a class of Sobol's estimators can be controlled by error analysis. ► The proposed algorithm is implemented efficiently to compute Sobol indices for a complex tree growth model.

  7. Web-based virtual microscopy at the RWTH Aachen University: didactic concept, methods and analysis of acceptance by the students.

    Science.gov (United States)

    Merk, Magdalene; Knuechel, Ruth; Perez-Bouza, Alberto

    2010-12-20

    Fundamental knowledge of microscopic anatomy and pathology has always been an essential part in medical education. The traditional didactic concept comprises theoretical and practical lessons using a light microscope and glass slides. High-speed Internet connections and technical improvement in whole-slide digital microscopy (commonly termed "virtual microscopy") provide a new and attractive approach for both teachers and students. High picture quality and unlimited temporal and spatial availability of histology samples from different fields are key advantages of web-based digital microscopy. In this report we discuss the technical requirements, system efficiency, optical resolution and didactic concept. Furthermore, we present a review of the experience gained in the course of one year based on an analysis of student acceptance. Three groups with a total of 192 students between the 3rd and 5th year of medical studies attending the practical courses of general and advanced histopathology had access to both glass-mounted and digitalized slides. Prior to exams, students were asked to answer an anonymous questionnaire. The results of the study reflect the high acceptance and intensive use of the web-based digital histology by students, thus encouraging the development of further Web-based learning strategies for the teaching of histology and pathology. 2010 Elsevier GmbH. All rights reserved.

  8. Growth of ruby crystals by the heat exchanger method, phase 1: NSF small business innovation research

    Science.gov (United States)

    Schmid, F.; Khattak, C. P.

    1980-03-01

    Conditions for the growth of large, uniformly doped laser crystals by the heat exchanger method are explored. Determination of the melt point, selection of crucible material and establishment of furnace operating parameters are discussed. The melt point of ruby was found to be 2040 plus or minus 10 C. Molybdenum crucibles can be used to contain ruby in vacuum as well as under argon atmospheres at desired superheat temperatures over extended periods required for crystal growth. Thermodynamic analysis was conducted and vapor pressures of volatile species calculated. Experimentally, volatilization of chromium oxides was suppressed by using welded covers on crucibles and operating under an argon pressure in the furnace.

  9. A new diatom growth inhibition assay using the XTT colorimetric method.

    Science.gov (United States)

    Jiang, Weina; Akagi, Takuya; Suzuki, Hidekazu; Takimoto, Ayaka; Nagai, Hiroshi

    2016-01-01

    Marine biofouling, which leads to significant operational stress and economic damage on marine infrastructures, is a major problem in marine related industries. Currently, the most common way to avoid marine biofouling involves the use of biocidal products in surface coatings. However, the need for environmentally friendly antibiofouling compounds has increased rapidly with the recent global prohibition of harmful antifoulants, such as tributyltin (TBT). In particular, periphytic diatoms have been shown to contribute significantly to biofilms, which play an important role in biofouling. Therefore, inhibiting the proliferation of fouling diatoms is a very important step in the prevention of marine biofouling. In this study, we developed a new, rapid, accurate, and convenient growth inhibition assay using the XTT colorimetric method to prevent the growth of the fouling periphytic diatom, Nitzschia amabilis Hidek. Suzuki (replaced synonym, Nitzschia laevis Hustedt). The feasibility of this method was verified by determining the growth inhibition activities of two standard photosynthetic inhibitors, DCMU and CuSO4. However, neither inhibitor had any cytotoxic activities at the range of concentrations tested. Moreover, this method was applied by screening and purification of herbicidic but non-cytotoxic compounds from cyanobacteria extracts. Our results demonstrate the utility of this newly established growth inhibition assay for the identification of marine anti-biofouling compounds. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Microwave-assisted Facile and Ultrafast Growth of ZnO Nanostructures and Proposition of Alternative Microwave-assisted Methods to Address Growth Stoppage

    Science.gov (United States)

    Rana, Abu Ul Hassan Sarwar; Kang, Mingi; Kim, Hyun-Seok

    2016-04-01

    The time constraint in the growth of ZnO nanostructures when using a hydrothermal method is of paramount importance in contemporary research, where a long fabrication time rots the very essence of the research on ZnO nanostructures. In this study, we present the facile and ultrafast growth of ZnO nanostructures in a domestic microwave oven within a pressurized environment in just a few minutes. This method is preferred for the conventional solution-based method because of the ultrafast supersaturation of zinc salts and the fabrication of high-quality nanostructures. The study of the effect of seed layer density, growth time, and the solution’s molar concentration on the morphology, alignment, density, and aspect ratio of ZnO nanorods (ZNRs) is explored. It is found in a microwave-assisted direct growth method that ~5 mins is the optimum time beyond which homogeneous nucleation supersedes heterogeneous nucleation, which results in the growth stoppage of ZNRs. To deal with this issue, we propound different methods such as microwave-assisted solution-replacement, preheating, and PEI-based growth methods, where growth stoppage is addressed and ZNRs with a high aspect ratio can be grown. Furthermore, high-quality ZnO nanoflowers and ZnO nanowalls are fabricated via ammonium hydroxide treatment in a very short time.

  11. Taguchi method for partial differential equations with application in tumor growth.

    Science.gov (United States)

    Ilea, M; Turnea, M; Rotariu, M; Arotăriţei, D; Popescu, Marilena

    2014-01-01

    The growth of tumors is a highly complex process. To describe this process, mathematical models are needed. A variety of partial differential mathematical models for tumor growth have been developed and studied. Most of those models are based on the reaction-diffusion equations and mass conservation law. A variety of modeling strategies have been developed, each focusing on tumor growth. Systems of time-dependent partial differential equations occur in many branches of applied mathematics. The vast majority of mathematical models in tumor growth are formulated in terms of partial differential equations. We propose a mathematical model for the interactions between these three cancer cell populations. The Taguchi methods are widely used by quality engineering scientists to compare the effects of multiple variables, together with their interactions, with a simple and manageable experimental design. In Taguchi's design of experiments, variation is more interesting to study than the average. First, Taguchi methods are utilized to search for the significant factors and the optimal level combination of parameters. Except the three parameters levels, other factors levels other factors levels would not be considered. Second, cutting parameters namely, cutting speed, depth of cut, and feed rate are designed using the Taguchi method. Finally, the adequacy of the developed mathematical model is proved by ANOVA. According to the results of ANOVA, since the percentage contribution of the combined error is as small. Many mathematical models can be quantitatively characterized by partial differential equations. The use of MATLAB and Taguchi method in this article illustrates the important role of informatics in research in mathematical modeling. The study of tumor growth cells is an exciting and important topic in cancer research and will profit considerably from theoretical input. Interpret these results to be a permanent collaboration between math's and medical oncologists.

  12. Tracing the cosmic web

    Science.gov (United States)

    Libeskind, Noam I.; van de Weygaert, Rien; Cautun, Marius; Falck, Bridget; Tempel, Elmo; Abel, Tom; Alpaslan, Mehmet; Aragón-Calvo, Miguel A.; Forero-Romero, Jaime E.; Gonzalez, Roberto; Gottlöber, Stefan; Hahn, Oliver; Hellwing, Wojciech A.; Hoffman, Yehuda; Jones, Bernard J. T.; Kitaura, Francisco; Knebe, Alexander; Manti, Serena; Neyrinck, Mark; Nuza, Sebastián E.; Padilla, Nelson; Platen, Erwin; Ramachandra, Nesar; Robotham, Aaron; Saar, Enn; Shandarin, Sergei; Steinmetz, Matthias; Stoica, Radu S.; Sousbie, Thierry; Yepes, Gustavo

    2018-01-01

    The cosmic web is one of the most striking features of the distribution of galaxies and dark matter on the largest scales in the Universe. It is composed of dense regions packed full of galaxies, long filamentary bridges, flattened sheets and vast low-density voids. The study of the cosmic web has focused primarily on the identification of such features, and on understanding the environmental effects on galaxy formation and halo assembly. As such, a variety of different methods have been devised to classify the cosmic web - depending on the data at hand, be it numerical simulations, large sky surveys or other. In this paper, we bring 12 of these methods together and apply them to the same data set in order to understand how they compare. In general, these cosmic-web classifiers have been designed with different cosmological goals in mind, and to study different questions. Therefore, one would not a priori expect agreement between different techniques; however, many of these methods do converge on the identification of specific features. In this paper, we study the agreements and disparities of the different methods. For example, each method finds that knots inhabit higher density regions than filaments, etc. and that voids have the lowest densities. For a given web environment, we find a substantial overlap in the density range assigned by each web classification scheme. We also compare classifications on a halo-by-halo basis; for example, we find that 9 of 12 methods classify around a third of group-mass haloes (i.e. Mhalo ∼ 1013.5 h-1 M⊙) as being in filaments. Lastly, so that any future cosmic-web classification scheme can be compared to the 12 methods used here, we have made all the data used in this paper public.

  13. Growth mechanisms and morphology of NaCl monocrystals obtained by the Czochralski method

    International Nuclear Information System (INIS)

    Goujon, Gilles G.

    1969-01-01

    In its first part, this research thesis describes the various aspects of the theory of crystal growth in melt bath by drawing with growth being limited either by heat transfer phenomena or by mechanisms of molecule transport through the interface. The second part addresses the quality of the obtained monocrystals (dislocations, dislocation density) while discussing the impact of external growth parameters (germ choice and orientation, drawing speed, rotating speed, atmosphere, impurities, crystal diameter). Then, the author presents an experimental study (equipment, experimental conditions) and discusses its results (influence of temperature on crystal geometry, morphology of side surface, study of crystal plane faces by chemical attack). The next part proposes an interpretation of the morphology change of a crystal drawn by the Czochralski method

  14. Graphene growth on Ge(100)/Si(100) substrates by CVD method.

    Science.gov (United States)

    Pasternak, Iwona; Wesolowski, Marek; Jozwik, Iwona; Lukosius, Mindaugas; Lupina, Grzegorz; Dabrowski, Pawel; Baranowski, Jacek M; Strupinski, Wlodek

    2016-02-22

    The successful integration of graphene into microelectronic devices is strongly dependent on the availability of direct deposition processes, which can provide uniform, large area and high quality graphene on nonmetallic substrates. As of today the dominant technology is based on Si and obtaining graphene with Si is treated as the most advantageous solution. However, the formation of carbide during the growth process makes manufacturing graphene on Si wafers extremely challenging. To overcome these difficulties and reach the set goals, we proposed growth of high quality graphene layers by the CVD method on Ge(100)/Si(100) wafers. In addition, a stochastic model was applied in order to describe the graphene growth process on the Ge(100)/Si(100) substrate and to determine the direction of further processes. As a result, high quality graphene was grown, which was proved by Raman spectroscopy results, showing uniform monolayer films with FWHM of the 2D band of 32 cm(-1).

  15. A simple method to tune graphene growth between monolayer and bilayer

    Directory of Open Access Journals (Sweden)

    Xiaozhi Xu

    2016-02-01

    Full Text Available Selective growth of either monolayer or bilayer graphene is of great importance. We developed a method to readily tune large area graphene growth from complete monolayer to complete bilayer. In an ambient pressure chemical vapor deposition process, we used the sample temperature at which to start the H2 flow as the control parameter and realized the change from monolayer to bilayer growth of graphene on Cu foil. When the H2 starting temperature was above 700°C, continuous monolayer graphene films were obtained. When the H2 starting temperature was below 350°C, continuous bilayer films were obtained. Detailed characterization of the samples treated under various conditions revealed that heating without the H2 flow caused Cu oxidation. The more the Cu substrate oxidized, the less graphene bilayer could form.

  16. Development of a model for on-line control of crystal growth by the AHP method

    Science.gov (United States)

    Gonik, M. A.; Lomokhova, A. V.; Gonik, M. M.; Kuliev, A. T.; Smirnov, A. D.

    2007-05-01

    The possibility to apply a simplified 2D model for heat transfer calculations in crystal growth by the axial heat close to phase interface (AHP) method is discussed in this paper. A comparison with global heat transfer calculations with the CGSim software was performed to confirm the accuracy of this model. The simplified model was shown to provide adequate results for the shape of the melt-crystal interface and temperature field in an opaque (Ge) and a transparent crystal (CsI:Tl). The model proposed is used for identification of the growth setup as a control object, for synthesis of a digital controller (PID controller at the present stage) and, finally, in on-line simulations of crystal growth control.

  17. Verification of annual growth rings in Egyptian trees by C-14 method

    International Nuclear Information System (INIS)

    Belacy, N.; Abou El-Nour, F.; Jacoby, G.C.

    1990-01-01

    Annual growth rings in trees were thought to be due to sharp seasonal variations in the precipitation rates during the year. Accordingly temperature zone trees such as Egyptian trees were supposed to be away from this phenomenon. The temperature zones which are meant here are those of no sharp seasonal variations in the precipitation rates. The present study applied carbon-14 dating to prove that the growth rings in some Egyptian trees are annual. The method was based on the tropospheric measurements of C-14 during the period 1954-1981. C-14 exhibited a sharp peak resulting from the ever greater series of nuclear tests during 1963-1965. The presence of this peak for Egyptian trees proved that they form annual growth rings. (orig.) [de

  18. The performance studies of DKDP crystals grown by a rapid horizontal growth method

    Science.gov (United States)

    Xie, Xiaoyi; Qi, Hongji; Wang, Bin; Wang, Hu; Chen, Duanyang; Shao, Jianda

    2018-04-01

    A deuterated potassium dihydrogen phosphate (DKDP) crystal with about 70% deuterium level was grown by a rapid horizontal growth method with independent design equipment, which includes a continuous filtration system. The cooling program during crystal growth was designed according to a self-developed software to catch the size of growing crystal in real time. The crystal structure, optical performance and laser induced damage threshold (LIDT) of this DKDP crystal were investigated in this paper. The deuterium concentration of the crystal was confirmed by the neutron diffraction technique, which was effective and available in determining a complete range of deuteration level. The dielectric property was measured to evaluate the perfection of the lattice. The transmittance and LIDT were carried out further to evaluate the optical and functional properties of this DKDP crystal grown in the rapid horizontal growth technique. All of the detailed characterization for DKDP figured out that the 70% deuterated KDP crystal grown in this way had relatively good qualities.

  19. Sensor web

    Science.gov (United States)

    Delin, Kevin A. (Inventor); Jackson, Shannon P. (Inventor)

    2011-01-01

    A Sensor Web formed of a number of different sensor pods. Each of the sensor pods include a clock which is synchronized with a master clock so that all of the sensor pods in the Web have a synchronized clock. The synchronization is carried out by first using a coarse synchronization which takes less power, and subsequently carrying out a fine synchronization to make a fine sync of all the pods on the Web. After the synchronization, the pods ping their neighbors to determine which pods are listening and responded, and then only listen during time slots corresponding to those pods which respond.

  20. A high precision extrapolation method in multiphase-field model for simulating dendrite growth

    Science.gov (United States)

    Yang, Cong; Xu, Qingyan; Liu, Baicheng

    2018-05-01

    The phase-field method coupling with thermodynamic data has become a trend for predicting the microstructure formation in technical alloys. Nevertheless, the frequent access to thermodynamic database and calculation of local equilibrium conditions can be time intensive. The extrapolation methods, which are derived based on Taylor expansion, can provide approximation results with a high computational efficiency, and have been proven successful in applications. This paper presents a high precision second order extrapolation method for calculating the driving force in phase transformation. To obtain the phase compositions, different methods in solving the quasi-equilibrium condition are tested, and the M-slope approach is chosen for its best accuracy. The developed second order extrapolation method along with the M-slope approach and the first order extrapolation method are applied to simulate dendrite growth in a Ni-Al-Cr ternary alloy. The results of the extrapolation methods are compared with the exact solution with respect to the composition profile and dendrite tip position, which demonstrate the high precision and efficiency of the newly developed algorithm. To accelerate the phase-field and extrapolation computation, the graphic processing unit (GPU) based parallel computing scheme is developed. The application to large-scale simulation of multi-dendrite growth in an isothermal cross-section has demonstrated the ability of the developed GPU-accelerated second order extrapolation approach for multiphase-field model.

  1. Lessons Learned for Online Health Community Moderator Roles: A Mixed-Methods Study of Moderators Resigning From WebMD Communities

    Science.gov (United States)

    Marmor, Rebecca; Jiang, Xiaoqian

    2016-01-01

    Background Online health community (OHC) moderators help facilitate conversations and provide information to members. However, the necessity of the moderator in helping members achieve goals by providing the support they need remains unclear, with some prior research suggesting that moderation is unnecessary or even harmful for close-knit OHCs. Similarly, members’ perceptions of moderator roles are underexplored. Starting January of 2013, WebMD moderators stopped working for WebMD communities. This event provided an opportunity for us to study the perceived role of moderators in OHCs. Objective We examine the OHC members’ perception on OHC moderators by studying their reactions toward the departure of moderators in their communities. We also analyzed the relative posting activity on OHCs before and after the departure of moderators from the communities among all members and those who discussed moderators’ departures. Methods We applied a mixed-methods approach to study the posts of all 55 moderated WebMD communities by querying the terms relating to discussions surrounding moderators’ disappearance from the WebMD community. We performed open and axial coding and affinity diagramming to thematically analyze patients’ reactions to the disappeared moderators. The number of posts and poster groups (members and moderators) were analyzed over time to understand posting patterns around moderators’ departure. Results Of 821 posts retrieved under 95 threads, a total of 166 open codes were generated. The codes were then grouped into 2 main themes with 6 total subthemes. First, patients attempted to understand why moderators had left and what could be done to fill the void left by the missing moderators. During these discussions, the posts revealed that patients believed that moderators played critical roles in the communities by making the communities vibrant and healthy, finding solutions, and giving medical information. Some patients felt personally attached

  2. Web Analytics

    Science.gov (United States)

    EPA’s Web Analytics Program collects, analyzes, and provides reports on traffic, quality assurance, and customer satisfaction metrics for EPA’s website. The program uses a variety of analytics tools, including Google Analytics and CrazyEgg.

  3. Web Service

    Science.gov (United States)

    ... topic data in XML format. Using the Web service, software developers can build applications that utilize MedlinePlus health topic information. The service accepts keyword searches as requests and returns relevant ...

  4. Numerical investigation of flows in Czochralski crystal growth by an axisymmetric lattice Boltzmann method

    Science.gov (United States)

    Peng, Y.; Shu, C.; Chew, Y. T.; Qiu, J.

    2003-03-01

    An alternative new method called lattice Boltzmann method (LBM) is applied in this work to simulate the flows in Czochralski crystal growth, which is one of the widely used prototypical systems for melt-crystal growth. The standard LBM can only be used in Cartesian coordinate system and we extend it to be applicable to this axisymmetric thermal flow problem, avoiding the use of three-dimensional LBM on Cartesian coordinate system. The extension is based on the following idea. By inserting position and time dependent source terms into the evolution equation of standard LBM, the continuity and NS equations on the cylindrical coordinate system [1] can be recovered. Our extension is validated by its application to the benchmark problem suggested by Wheeler [2].

  5. Numerical investigation of flows in Czochralski crystal growth by an axisymmetric lattice Boltzmann method

    International Nuclear Information System (INIS)

    Peng, Y.; Shu, C.; Chew, Y.T.; Qiu, J.

    2003-01-01

    An alternative new method called lattice Boltzmann method (LBM) is applied in this work to simulate the flows in Czochralski crystal growth, which is one of the widely used prototypical systems for melt-crystal growth. The standard LBM can only be used in Cartesian coordinate system and we extend it to be applicable to this axisymmetric thermal flow problem, avoiding the use of three-dimensional LBM on Cartesian coordinate system. The extension is based on the following idea. By inserting position and time dependent source terms into the evolution equation of standard LBM, the continuity and NS equations on the cylindrical coordinate system can be recovered. Our extension is validated by its application to the benchmark problem suggested by Wheeler

  6. Numerical investigation of flows in Czochralski crystal growth by an axisymmetric lattice Boltzmann method

    CERN Document Server

    Peng, Y; Chew, Y T; Qiu, J

    2003-01-01

    An alternative new method called lattice Boltzmann method (LBM) is applied in this work to simulate the flows in Czochralski crystal growth, which is one of the widely used prototypical systems for melt-crystal growth. The standard LBM can only be used in Cartesian coordinate system and we extend it to be applicable to this axisymmetric thermal flow problem, avoiding the use of three-dimensional LBM on Cartesian coordinate system. The extension is based on the following idea. By inserting position and time dependent source terms into the evolution equation of standard LBM, the continuity and NS equations on the cylindrical coordinate system can be recovered. Our extension is validated by its application to the benchmark problem suggested by Wheeler .

  7. Influence of Te and Se doping on ZnO films growth by SILAR method

    Science.gov (United States)

    Güney, Harun; Duman, Ćaǧlar

    2016-04-01

    The AIP Successive ionic layer adsorption and reaction (SILAR) is an economic and simple method to growth thin films. In this study, SILAR method is used to growth Selenium (Se) and Tellurium (Te) doped zinc oxide (ZnO) thin films with different doping rates. For characterization of the films X-ray diffraction (XRD), absorbance and scanning electron microscopy (SEM) are used. XRD results are showed well-defined strongly (002) oriented crystal structure for all samples. Also, absorbance measurements show, Te and Se concentration are proportional and inversely proportional with band gap energy, respectively. SEM measurements show that the surface morphology and thickness of the material varied with Se and/or Te and varying concentrations.

  8. Influence of Te and Se doping on ZnO films growth by SILAR method

    International Nuclear Information System (INIS)

    Güney, Harun; Duman, Çağlar

    2016-01-01

    The AIP Successive ionic layer adsorption and reaction (SILAR) is an economic and simple method to growth thin films. In this study, SILAR method is used to growth Selenium (Se) and Tellurium (Te) doped zinc oxide (ZnO) thin films with different doping rates. For characterization of the films X-ray diffraction (XRD), absorbance and scanning electron microscopy (SEM) are used. XRD results are showed well-defined strongly (002) oriented crystal structure for all samples. Also, absorbance measurements show, Te and Se concentration are proportional and inversely proportional with band gap energy, respectively. SEM measurements show that the surface morphology and thickness of the material varied with Se and/or Te and varying concentrations.

  9. Influence of Te and Se doping on ZnO films growth by SILAR method

    Energy Technology Data Exchange (ETDEWEB)

    Güney, Harun, E-mail: harunguney25@hotmail.com [Department of Electric and Energy, Vocation High School, Ağrı İbrahim Çeçen University (Turkey); Duman, Çağlar, E-mail: caglarduman@erzurum.edu.tr [Department of Electrical and Electronic Engineering, Faculty of Engineering, Erzurum Technical University (Turkey)

    2016-04-18

    The AIP Successive ionic layer adsorption and reaction (SILAR) is an economic and simple method to growth thin films. In this study, SILAR method is used to growth Selenium (Se) and Tellurium (Te) doped zinc oxide (ZnO) thin films with different doping rates. For characterization of the films X-ray diffraction (XRD), absorbance and scanning electron microscopy (SEM) are used. XRD results are showed well-defined strongly (002) oriented crystal structure for all samples. Also, absorbance measurements show, Te and Se concentration are proportional and inversely proportional with band gap energy, respectively. SEM measurements show that the surface morphology and thickness of the material varied with Se and/or Te and varying concentrations.

  10. Methods for growth of relatively large step-free SiC crystal surfaces

    Science.gov (United States)

    Neudeck, Philip G. (Inventor); Powell, J. Anthony (Inventor)

    2002-01-01

    A method for growing arrays of large-area device-size films of step-free (i.e., atomically flat) SiC surfaces for semiconductor electronic device applications is disclosed. This method utilizes a lateral growth process that better overcomes the effect of extended defects in the seed crystal substrate that limited the obtainable step-free area achievable by prior art processes. The step-free SiC surface is particularly suited for the heteroepitaxial growth of 3C (cubic) SiC, AlN, and GaN films used for the fabrication of both surface-sensitive devices (i.e., surface channel field effect transistors such as HEMT's and MOSFET's) as well as high-electric field devices (pn diodes and other solid-state power switching devices) that are sensitive to extended crystal defects.

  11. NNAlign: A Web-Based Prediction Method Allowing Non-Expert End-User Discovery of Sequence Motifs in Quantitative Peptide Data

    DEFF Research Database (Denmark)

    Andreatta, Massimo; Schafer-Nielsen, Claus; Lund, Ole

    2011-01-01

    Recent advances in high-throughput technologies have made it possible to generate both gene and protein sequence data at an unprecedented rate and scale thereby enabling entirely new "omics"-based approaches towards the analysis of complex biological processes. However, the amount and complexity...... to interpret large data sets. We have recently developed a method, NNAlign, which is generally applicable to any biological problem where quantitative peptide data is available. This method efficiently identifies underlying sequence patterns by simultaneously aligning peptide sequences and identifying motifs...... associated with quantitative readouts. Here, we provide a web-based implementation of NNAlign allowing non-expert end-users to submit their data (optionally adjusting method parameters), and in return receive a trained method (including a visual representation of the identified motif) that subsequently can...

  12. Prediction system of hydroponic plant growth and development using algorithm Fuzzy Mamdani method

    Science.gov (United States)

    Sudana, I. Made; Purnawirawan, Okta; Arief, Ulfa Mediaty

    2017-03-01

    Hydroponics is a method of farming without soil. One of the Hydroponic plants is Watercress (Nasturtium Officinale). The development and growth process of hydroponic Watercress was influenced by levels of nutrients, acidity and temperature. The independent variables can be used as input variable system to predict the value level of plants growth and development. The prediction system is using Fuzzy Algorithm Mamdani method. This system was built to implement the function of Fuzzy Inference System (Fuzzy Inference System/FIS) as a part of the Fuzzy Logic Toolbox (FLT) by using MATLAB R2007b. FIS is a computing system that works on the principle of fuzzy reasoning which is similar to humans' reasoning. Basically FIS consists of four units which are fuzzification unit, fuzzy logic reasoning unit, base knowledge unit and defuzzification unit. In addition to know the effect of independent variables on the plants growth and development that can be visualized with the function diagram of FIS output surface that is shaped three-dimensional, and statistical tests based on the data from the prediction system using multiple linear regression method, which includes multiple linear regression analysis, T test, F test, the coefficient of determination and donations predictor that are calculated using SPSS (Statistical Product and Service Solutions) software applications.

  13. Factors Associated With Engagement With a Web-Based Lifestyle Intervention Following Provision of Coronary Heart Disease Risk: Mixed Methods Study.

    Science.gov (United States)

    Usher-Smith, Juliet A; Winther, Laura R; Shefer, Guy S; Silarova, Barbora; Payne, Rupert A; Griffin, Simon J

    2017-10-16

    Web-based interventions provide the opportunity to combine the tailored approach of face-to-face interventions with the scalability and cost-effectiveness of public health interventions. This potential is often limited by low engagement. A number of studies have described the characteristics of individuals who engage more in Web-based interventions but few have explored the reasons for these variations. We aimed to explore individual-level factors associated with different degrees of engagement with a Web-based behavior change intervention following provision of coronary heart disease (CHD) risk information, and the barriers and facilitators to engagement. This study involved the secondary analysis of data from the Information and Risk Modification Trial, a randomized controlled trial of a Web-based lifestyle intervention alone, or alongside information on estimated CHD risk. The intervention consisted of three interactive sessions, each lasting up to 60 minutes, delivered at monthly intervals. Participants were characterized as high engagers if they completed all three sessions. Thematic analysis of qualitative data from interviews with 37 participants was combined with quantitative data on usage of the Web-based intervention using a mixed-methods matrix, and data on the views of the intervention itself were analyzed across all participants. Thirteen participants were characterized as low engagers and 24 as high engagers. There was no difference in age (P=.75), gender (P=.95), or level of risk (P=.65) between the groups. Low engagement was more often associated with: (1) reporting a negative emotional reaction in response to the risk score (P=.029), (2) perceiving that the intervention did not provide any new lifestyle information (P=.011), and (3) being less likely to have reported feeling an obligation to complete the intervention as part of the study (P=.019). The mixed-methods matrix suggested that there was also an association between low engagement and less

  14. Effects of different CMV-heat-inactivation-methods on growth factors in human breast milk.

    Science.gov (United States)

    Goelz, Rangmar; Hihn, Eva; Hamprecht, Klaus; Dietz, Klaus; Jahn, Gerhard; Poets, Christian; Elmlinger, Martin

    2009-04-01

    Preterm infants can inoculate virulent cytomegalovirus (CMV) through their mothers' raw breast milk. Complete virus inactivation is achieved only by heat treatment, but the effect on growth factors has never been assessed systematically. Insulin-like-growth-factor-1-, IGF-2-, insulin-like-growth-factor-binding-protein-2-, and IGFBP-3-concentrations were measured, before and after heating, in 51 breast-milk-samples from 28 mothers, and epidermal-growth-factor-concentrations in a subgroup of 35 samples from 22 mothers. Two heating methods were applied: Short-term (5 s) pasteurisation at 62, 65, and 72 degrees C, and long-term Holder-Pasteurisation (30 min) at 63 degrees C. IGF-1, IGF-2, IGFBP-2, and IGFBP-3 were measured by RIA, and EGF by ELISA. Heating for 30 min decreased significantly IGF-1 by 39.4%, IGF-2 by 9.9%, IGFBP-2 by 19.1%, and IGFBP-3 by 7.0%. In contrast, IGF-1, IGF-2, IGFBP-2, and IGFBP-3 were not altered significantly when using a short heating duration of 5 s, irrespective of the level of temperature, except for IGF-2 at 62 degrees C for 5 s (p = 0.041) and IGFBP-2 at 72 degrees C for 5 s (p = 0.025). Neither long- nor short-time heating methods changed the concentration of EGF. Only short heating methods (5 s, 62-72 degrees C) can preserve, almost completely, the concentrations of IGFs in human milk, whereas Holder-Pasteurization does not.

  15. High Quality, Low Cost Bulk Gallium Nitride Substrates Grown by the Electrochemical Solution Growth Method

    Energy Technology Data Exchange (ETDEWEB)

    Seacrist, Michael [SunEdison Inc., St. Peters, MO (United States)

    2017-08-15

    The objective of this project was to develop the Electrochemical Solution Growth (ESG) method conceived / patented at Sandia National Laboratory into a commercially viable bulk gallium nitride (GaN) growth process that can be scaled to low cost, high quality, and large area GaN wafer substrate manufacturing. The goal was to advance the ESG growth technology by demonstrating rotating seed growth at the lab scale and then transitioning process to prototype commercial system, while validating the GaN material and electronic / optical device quality. The desired outcome of the project is a prototype commercial process for US-based manufacturing of high quality, large area, and lower cost GaN substrates that can drive widespread deployment of energy efficient GaN-based power electronic and optical devices. In year 1 of the project (Sept 2012 – Dec 2013) the overall objective was to demonstrate crystalline GaN growth > 100um on a GaN seed crystal. The development plan included tasks to demonstrate and implement a method for purifying reagent grade salts, develop the reactor 1 process for rotating seed Electrochemical Solution Growth (ESG) of GaN, grow and characterize ESG GaN films, develop a fluid flow and reaction chemistry model for GaN film growth, and design / build an improved growth reactor capable of scaling to 50mm seed diameter. The first year’s project objectives were met in some task areas including salt purification, film characterization, modeling, and reactor 2 design / fabrication. However, the key project objective of the growth of a crystalline GaN film on the seed template was not achieved. Amorphous film growth on the order of a few tenths of a micron has been detected with a film composition including Ga and N, plus several other impurities originating from the process solution and hardware. The presence of these impurities, particularly the oxygen, has inhibited the demonstration of crystalline GaN film growth on the seed template. However, the

  16. METHODS FOR OVERCOMING SEED DORMANCY AND THE INITIAL GROWTH OF Ziziphus joazeiro Mart. IN DIFFERENT SOILS

    Directory of Open Access Journals (Sweden)

    JOSENARA DAIANE DE SOUZA COSTA

    2016-01-01

    Full Text Available Considering the potential and importance of biodiversity of the Caatinga biome, studies on endemic species are relevant to conservation of its natural resources. The objectives of this work was to evaluate seed viability and physical methods for overcoming seed dormancy in juazeiro (Ziziphus joazeiro Mart. and assess the influence of different types of soil on the initial growth of juazeiro plants. The experiments were conducted in three stages. In the first stage, the viability of seeds from different lots was evaluated using the tetrazolium test. The second stage was conducted in a plant nursery, evaluating the application of physical processes (scarification with sandpaper and hammer in overcoming seed dormancy, and the initial growth of the plants. In the third step, the chlorophyll a and b contents, gas exchange and dry matter accumulation were evaluated in young juazeiro plants in three types of soil (Oxisol, Entisol and Vertisol. The results indicate that the viability of juazeiro seeds is greatly influenced by differences between the progenitor plants and by storage conditions, which enable a longevity of two years when stored at 22°C and 16% of relative humidity. The scarification methods with sandpaper and hammer are not efficient to reduce the time and uniform seed germination. The juazeiro plants have high growth potential in different edaphic environments, adapting well to soils of different textures and chemical compositions.

  17. Simulating the growth process of aromatic polyamide layer by monomer concentration controlling method

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Yan [Vontron Technology Co., Ltd., Guiyang 550018, Guizhou (China); Liang, Songmiao, E-mail: liangsongmiao@vontron.com.cn [Vontron Technology Co., Ltd., Guiyang 550018, Guizhou (China); Wu, Zongce; Cai, Zhiqi [Vontron Technology Co., Ltd., Guiyang 550018, Guizhou (China); Zhao, Ning [National Laboratory of Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences (ICCAS), Beijing 100190 (China)

    2014-09-30

    Highlights: • A concentration controlling method to simulate the growth process of polyamide layer was developed. • The surface structure features and properties of polyamide layer at its different growth stages were systematically investigated. • Structure transition from spherical aggregator to leaf-like to typical ridge-and-valley was observed. • The performance of RO membrane is closely related to the structure of polyamide. - Abstract: With the wide distribution and gradual increase of TMC concentration (C{sub TMC}) from 1 × 10{sup −4} wt% to 2.5 × 10{sup −1} wt%, the main purpose of this work is to simulate the surface structure and properties of polyamide layer of reverse osmosis membranes at its different growth stage. The surface structure and properties of the resulted membranes were then characterized by atomic force microscopy (AFM), scanning electron microscope (SEM), attenuated total reflectance infrared (ATR-IR) spectroscopy, drop shape analysis system and electrokinetic analyzer. The structure growth of polyamide layer underwent in turn three different stages including spherical aggregator, leaf-like and typical ridge-valley structure. Spherical aggregator is the intrinsic structure in the inner layer of polyamide while leaf-like structure is transitional on the outmost polyamide layer. Furthermore, to clarify the effect of the structure change on the properties of polyamide layer, contact angle and zeta potential in the surface of polyamide layer were studied. Hydrophilic surface of polyamide layer is accessible at higher TMC concentration because of the presence of negative charged groups. Performances of the membranes were further measured with an emphasis on studying its structure–performance relationship during the growth process of polyamide layer.

  18. The study of thin film growth by using Monte Carlo method

    International Nuclear Information System (INIS)

    Tandogan, M.; Aktas, S.

    2010-01-01

    Thin film growth was studied by using Monte Carlo simulation method. Three basic models were used in this study. Model A, the gas particles used for the formation of film were under no external effects until they stick on the surface or to another particle which already stickled on the surface to form the film. Model B, gases were drifted towards the surface by an external agent. Model C, where the gas particles in the closed container were always distributed uniformly throughout the container while they are in gas state. The simulations revealed the fact that for an ideal thin film growth Model C gave the best result to prepare a thin film while a thicker but a better quality could be obtained by Model B.

  19. On some descriptive and predictive methods for the dynamics of cancer growth

    Directory of Open Access Journals (Sweden)

    Iulian T. Vlad

    2015-09-01

    Full Text Available Cancer is a widely spread disease that affects a large proportion of the human population, and many research teams are developing algorithms to help medics to understand this disease. In particular, tumor growth has been studied from different viewpoints and several mathematical models have been proposed. In this paper, we review a set of comprehensive and modern tools that are useful for prediction of cancer growth in space and time. We comment on three alternative approaches. We first consider spatio-temporal stochastic processes within a Bayesian framework to model spatial heterogeneity, temporal dependence and spatio-temporal interactions amongst the pixels, providing a general modeling framework for such dynamics. We then consider predictions based on geometric properties of plane curves and vectors, and propose two methods of geometric prediction. Finally we focus on functional data analysis to statistically compare tumor contour evolutions. We also analyze real data on brain tumor.

  20. RPM-WEBBSYS: A web-based computer system to apply the rational polynomial method for estimating static formation temperatures of petroleum and geothermal wells

    Science.gov (United States)

    Wong-Loya, J. A.; Santoyo, E.; Andaverde, J. A.; Quiroz-Ruiz, A.

    2015-12-01

    A Web-Based Computer System (RPM-WEBBSYS) has been developed for the application of the Rational Polynomial Method (RPM) to estimate static formation temperatures (SFT) of geothermal and petroleum wells. The system is also capable to reproduce the full thermal recovery processes occurred during the well completion. RPM-WEBBSYS has been programmed using advances of the information technology to perform more efficiently computations of SFT. RPM-WEBBSYS may be friendly and rapidly executed by using any computing device (e.g., personal computers and portable computing devices such as tablets or smartphones) with Internet access and a web browser. The computer system was validated using bottomhole temperature (BHT) measurements logged in a synthetic heat transfer experiment, where a good matching between predicted and true SFT was achieved. RPM-WEBBSYS was finally applied to BHT logs collected from well drilling and shut-in operations, where the typical problems of the under- and over-estimation of the SFT (exhibited by most of the existing analytical methods) were effectively corrected.

  1. A simple method for analysing the effects of algae on the growth of Lemna and preventing algal growth in duckweed bioassays

    NARCIS (Netherlands)

    Szabo, S.; Roijackers, R.M.M.; Scheffer, M.

    2003-01-01

    A simple novel method for indoor culture experiments with small floating water plants, such as Lemnaceae, is described. Experiments demonstrate that the method allows for longer lasting culture experiments with Lemna, avoiding algal growth and self-shading of fronds by overcrowding. This is achieved

  2. Responses of growth of lady's fingers (Abelmoschus esculentus L.) to different treatments methods of dairy wastewater.

    Science.gov (United States)

    Al-Dulaimi, Rana Ibrahim; Ismail, Norli; Ibrahim, Mahamad H

    2014-01-01

    Water is one of the most important precious resources found on the earth, and are most often affected by anthropogenic activities and by industry. Pollution caused by human beings and industries is a serious concern throughout the world. Population growth, massive urbanization, rapid rate of industrialization and modern techniques in agriculture have accelerated water pollution and led to the gradual deterioration of its quality. A large quantity of waste water disposed of at sea or on land has caused environmental problems which have led to environmental pollution, economic losses and chemical risks caused by the wastewater, and its impact on agriculture. However, waste water which contain nutrients and organic matter has possible advantages for agricultural purposes. Therefore, the presented study was undertaken to assess the impact of Dairy Effluent (treated and untreated waste water) on seed germination, seedling growth, dry matter production and the biochemical parameters of lady's fingers (Abelmoschus esculentus L.). A field experiment in a green house was conducted to use raw and treated dairy wastewater for watering lady's fingers (Abelmoschus esculentus L.). The plants were watered using (WW) raw dairy wastewater, (T1) chemicals treatment, (T2) physical treatment, (T3) dilution method treatment and tap water (TW) in pot experiments. Ten plants of each treatment /3 replicate were randomly selected and labelled for the collection of data. The data was collected sequentially, starting with chlorophyll content pre-harvest, vegetative qualities (shoot, root and seedling length) and dry matter quality (shoot and root dry matter) pos-tharvest. The effect was seen on the germination seed and growth of the plant. The results showed inhibitory effect from dairy effluent (WW) on seed germination and plant growth. Treatment with chemicals showed statistically significant differences with other treatments. Chemical treatment (TC2) at 20 mg/L Al2(SO4)3 and pH 6

  3. System configuration on Web with mashup.

    OpenAIRE

    清水, 宏泰; SHIMIZU, Hiroyasu

    2014-01-01

    Mashup become trend for create Web service due to popularizing cloud service. Mashup is method for create Web service from several Web services and API. Mashup has a few problems. One of the problem is deference of data format and label. Semantic Web can solve it. This paper propose method of building a system on Web with mashup using semantic Web. Mashup system configuration can express as URL. So, editing URL for mashup is editing system configuration. And any device can use this system on ...

  4. Effects of Online Instructional Conversation on English as a Foreign Language Learners' WebQuest Writing Performance: A Mixed Methods Study

    Science.gov (United States)

    Lee, Haesong

    2013-01-01

    WebQuests, or inquiry-oriented activities in which learners interact with Web-based information (Dodge, 1995, 1996, 2007), have recently been gaining popularity in education in general and in language education in particular. While it has the advantage of fostering higher-level thinking through authentic assignments, a WebQuest can be challenging…

  5. In ovo method for evaluating the effect of nutritional therapies on tumor development, growth and vascularization

    Directory of Open Access Journals (Sweden)

    Yves M. Dupertuis

    2015-10-01

    Full Text Available In the state of the art evaluation of nutritional therapy on tumor development, growth and vascularization requires tedious and expensive in vivo assays in which a significant number of animals undergo invasive treatments. Therefore, new alternative methods to avoid animal suffering and sacrifice are welcome. This review presents a rapid and low-cost method of experimental radio/chemotherapy in tumor xenografted chicken chorioallantoic membrane (CAM, which may contribute to implement the 3R principle (Reduce, Refine, Replace. Advantages and limitations of the CAM as an experimental model in cancer research are discussed. Improving the CAM model by using tumor spheroid grafting and positron emission and computed tomography imaging would help to overcome the drawbacks of poor tumor grafting efficiency and restrained 2-D tumor growth measurement to the CAM surface. Such a simple, reliable, reproducible and quantitative method for obtaining dose–response analysis and estimating treatment schedule (i.e. type, route, dose and timing would provide an alternative to the time-consuming and expensive evaluation step in animals before initiating clinical trials.

  6. Optimization of the purification methods for recovery of recombinant growth hormone from Paralichthys olivaceus

    Science.gov (United States)

    Zang, Xiaonan; Zhang, Xuecheng; Mu, Xiaosheng; Liu, Bin

    2013-03-01

    This study aimed to optimize the purification of recombinant growth hormone from Paralichthys olivaceus. Recombinant flounder growth hormone (r-fGH) was expressed by Escherichia coli in form of inclusion body or as soluble protein under different inducing conditions. The inclusion body was renatured using two recovery methods, i.e., dilution and dialysis. Thereafter, the refolded protein was purified by Glutathione Sepharase 4B affinity chromatography and r-fGH was obtained by cleavage of thrombin. For soluble products, r-fGH was directly purified from the lysates by Glutathione Sepharase 4B affinity chromatography. ELISA-receptor assay demonstrated that despite its low receptor binding activity, the r-fGH purified from refolded inclusion body had a higher yield (2.605 mg L-1) than that from soluble protein (1.964 mg L-1). Of the tested recovery methods, addition of renaturing buffer (pH 8.5) into denatured inclusion body yielded the best recovery rate (17.9%). This work provided an optimized purification method for high recovery of r-fGH, thus contributing to the application of r-fGH to aquaculture.

  7. Method for single crystal growth of photovoltaic perovskite material and devices

    Science.gov (United States)

    Huang, Jinsong; Dong, Qingfeng

    2017-11-07

    Systems and methods for perovskite single crystal growth include using a low temperature solution process that employs a temperature gradient in a perovskite solution in a container, also including at least one small perovskite single crystal, and a substrate in the solution upon which substrate a perovskite crystal nucleates and grows, in part due to the temperature gradient in the solution and in part due to a temperature gradient in the substrate. For example, a top portion of the substrate external to the solution may be cooled.

  8. Model for determining vapor equilibrium rates in the hanging drop method for protein crystal growth

    Science.gov (United States)

    Baird, James K.; Frieden, Richard W.; Meehan, E. J., Jr.; Twigg, Pamela J.; Howard, Sandra B.; Fowlis, William A.

    1987-01-01

    An engineering analysis of the rate of evaporation of solvent in the hanging drop method of protein crystal growth is presented. Results are applied to 18 drop and well arrangements commonly encountered in the laboratory. The chemical nature of the salt, drop size and shape, drop concentration, well size, well concentration, and temperature are taken into account. The rate of evaporation increases with temperature, drop size, and the salt concentration difference between the drop and the well. The evaporation in this model possesses no unique half-life. Once the salt in the drop achieves 80 percent of its final concentration, further evaporation suffers from the law of diminishing returns.

  9. Optimization of Growth Medium for Efficient Cultivation of Lactobacillus salivarius i 24 using Response Surface Method

    Directory of Open Access Journals (Sweden)

    Lim, C. H.

    2007-01-01

    Full Text Available Production of Lactobacillus salivarius i 24, a probiotic strain for chicken, was studied in batch fermentation using 500 mL Erlenmeyer flask. Response surface method (RSM was used to optimize the medium for efficient cultivation of the bacterium. The factors investigated were yeast extract, glucose and initial culture pH. A polynomial regression model with cubic and quartic terms was used for the analysis of the experimental data. Estimated optimal conditions of the factors for growth of L. salivarius i 24 were; 3.32 % (w/v glucose, 4.31 % (w/v yeast extract and initial culture pH of 6.10.

  10. A new method to manipulate broiler chicken growth and metabolism: Response to mixed LED light system

    Science.gov (United States)

    Yang, Yefeng; Yu, Yonghua; Pan, Jinming; Ying, Yibin; Zhou, Hong

    2016-05-01

    Present study introduced a new method to manipulate broiler chicken growth and metabolism by mixing the growth-advantage LED. We found that the green/blue LED mixed light system (G-B and G × B) have the similar stimulatory effect on chick body weight with single green light and single blue light (G and B), compared with normal artificial light (P = 0.028). Moreover, the percentage of carcass was significantly greater in the mixed light (G × B) when compared with the single light (P = 0.003). Synchronized with body weight, the mixed light (G-B and G × B) had a significant improved influence on the feed conversion of birds compared with normal light (P = 0.002). A significant improvement in feed conversion were found in mixed light (G × B) compared with single LED light (P = 0.037). G group resulted in a greater high-density lipoprotein cholesterol level than B group (P = 0.002), whereas B group resulted in a greater low-density lipoprotein cholesterol level than G group (P = 0.017). The mixed light significantly increased the birds’ glucose level in comparison with the single light (P = 0.003). This study might establish an effective strategy for maximizing growth of chickens by mixed LED technology.

  11. Fiber webs

    Science.gov (United States)

    Roger M. Rowell; James S. Han; Von L. Byrd

    2005-01-01

    Wood fibers can be used to produce a wide variety of low-density three-dimensional webs, mats, and fiber-molded products. Short wood fibers blended with long fibers can be formed into flexible fiber mats, which can be made by physical entanglement, nonwoven needling, or thermoplastic fiber melt matrix technologies. The most common types of flexible mats are carded, air...

  12. Web Sitings.

    Science.gov (United States)

    Lo, Erika

    2001-01-01

    Presents seven mathematics games, located on the World Wide Web, for elementary students, including: Absurd Math: Pre-Algebra from Another Dimension; The Little Animals Activity Centre; MathDork Game Room (classic video games focusing on algebra); Lemonade Stand (students practice math and business skills); Math Cats (teaches the artistic beauty…

  13. Tracheal web

    International Nuclear Information System (INIS)

    Legasto, A.C.; Haller, J.O.; Giusti, R.J.

    2004-01-01

    Congenital tracheal web is a rare entity often misdiagnosed as refractory asthma. Clinical suspicion based on patient history, examination, and pulmonary function tests should lead to its consideration. Bronchoscopy combined with CT imaging and multiplanar reconstruction is an accepted, highly sensitive means of diagnosis. (orig.)

  14. Development of a microtitre-based spectrophotometric method to monitor Babesia divergens growth in vitro.

    Science.gov (United States)

    Malandrin, Laurence; Marchand, Anne-Marie; Chauvin, Alain

    2004-09-01

    Babesia divergens multiplication cycle involves erythrocyte invasion, intracellular division, and erythrocyte lysis with the simultaneous liberation of hemoglobin. We have decided to set up a spectrophotometric protocol based on hemoglobin concentration in the culture supernatants to monitor B. divergens in vitro growth. After the selection of 405 nm as the most appropriate endpoint hemoglobin wavelength in our conditions (hemoglobin concentration in the supernatant), cultures were standardized [1 x 10(9) red blood cell (RBC)/ml, 1-2.5 x 10(5) infected red blood cell (iRBC)/ml] to allow their monitoring over 3 days. The protocol was then compared to the most commonly used growth measurement methods: parasitemia counting and [(3)H]hypoxanthine incorporation. An excellent correlation was demonstrated between A(405) of the culture supernatant and parasitemia of the iRBC, whatever the RBC concentration used in the medium. This correlation was also evidenced between A(405) and [(3)H]hypoxanthine incorporation for [(3)H]hypoxanthine concentrations lower than 4 microCi/ml. Our assays also highlighted the inhibitory effect of [(3)H]hypoxanthine on B. divergens growth even when used at low concentrations (0.8 microCi/ml) and for a short incorporation duration (24 h). This effect was confirmed by both A(405) and parasitemia counting. In conclusion, A(405) measurement of B. divergens culture supernatant represents a simple, rapid, safe, and reliable way to measure the in vitro growth of this parasite. Generation times of three different B. divergens strains were then determined by the protocol described here and varied between 8 h 36 min and 13 h 8 min.

  15. A web-based approach to data imputation

    KAUST Repository

    Li, Zhixu; Sharaf, Mohamed Abdel Fattah; Sitbon, Laurianne; Sadiq, Shazia Wasim; Indulska, Marta; Zhou, Xiaofang

    2013-01-01

    principle. Moreover, WebPut extends effective Information Extraction (IE) methods for the purpose of formulating web search queries that are capable of effectively retrieving missing values with high accuracy. WebPut employs a confidence-based scheme

  16. Solution of Dendritic Growth in Steel by the Novel Point Automata Method

    International Nuclear Information System (INIS)

    Lorbiecka, A Z; Šarler, B

    2012-01-01

    The aim of this paper is the simulation of dendritic growth in steel in two dimensions by a coupled deterministic continuum mechanics heat and species transfer model and a stochastic localized phase change kinetics model taking into account the undercooling, curvature, kinetic, and thermodynamic anisotropy. The stochastic model receives temperature and concentration information from the deterministic model and the deterministic heat, and species diffusion equations receive the solid fraction information from the stochastic model. The heat and species transfer models are solved on a regular grid by the standard explicit Finite Difference Method (FDM). The phase-change kinetics model is solved by a novel Point Automata (PA) approach. The PA method was developed [1] in order to circumvent the mesh anisotropy problem, associated with the classical Cellular Automata (CA) method. The PA approach is established on randomly distributed points and neighbourhood configuration, similar as appears in meshless methods. A comparison of the PA and CA methods is shown. It is demonstrated that the results with the new PA method are not sensitive to the crystallographic orientations of the dendrite.

  17. Estimation of Staphylococcus aureus growth parameters from turbidity data: characterization of strain variation and comparison of methods.

    Science.gov (United States)

    Lindqvist, R

    2006-07-01

    Turbidity methods offer possibilities for generating data required for addressing microorganism variability in risk modeling given that the results of these methods correspond to those of viable count methods. The objectives of this study were to identify the best approach for determining growth parameters based on turbidity data and use of a Bioscreen instrument and to characterize variability in growth parameters of 34 Staphylococcus aureus strains of different biotypes isolated from broiler carcasses. Growth parameters were estimated by fitting primary growth models to turbidity growth curves or to detection times of serially diluted cultures either directly or by using an analysis of variance (ANOVA) approach. The maximum specific growth rates in chicken broth at 17 degrees C estimated by time to detection methods were in good agreement with viable count estimates, whereas growth models (exponential and Richards) underestimated growth rates. Time to detection methods were selected for strain characterization. The variation of growth parameters among strains was best described by either the logistic or lognormal distribution, but definitive conclusions require a larger data set. The distribution of the physiological state parameter ranged from 0.01 to 0.92 and was not significantly different from a normal distribution. Strain variability was important, and the coefficient of variation of growth parameters was up to six times larger among strains than within strains. It is suggested to apply a time to detection (ANOVA) approach using turbidity measurements for convenient and accurate estimation of growth parameters. The results emphasize the need to consider implications of strain variability for predictive modeling and risk assessment.

  18. An application of the variable-r method to subpopulation growth rates in a 19th century agricultural population

    Directory of Open Access Journals (Sweden)

    Corey Sparks

    2009-07-01

    Full Text Available This paper presents an analysis of the differential growth rates of the farming and non-farming segments of a rural Scottish community during the 19th and early 20th centuries using the variable-r method allowing for net migration. Using this method, I find that the farming population of Orkney, Scotland, showed less variability in their reproduction and growth rates than the non-farming population during a period of net population decline. I conclude by suggesting that the variable-r method can be used in general cases where the relative growth of subpopulations or subpopulation reproduction is of interest.

  19. Simple and convenient preparation of Au-Pt core-shell nanoparticles on surface via a seed growth method

    International Nuclear Information System (INIS)

    Qian Lei; Sha Yufang; Yang Xiurong

    2006-01-01

    Au-Pt core-shell nanoparticles were prepared on glass surface by a seed growth method. Gold nanoparticles were used as seeds and ascorbic acid-H 2 PtCl 6 solutions as growth solutions to deposit Pt shell on the surface of gold nanoparticles. These core-shell nanoparticles and their growth process were examined by UV-Vis spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy and field-emission environmental scanning electron microscopy and the results indicated that the deposition speed was fast and nanoparticles with obvious core-shell structure could be obtained after 2 min. Moreover, this seed growth method for preparation of the core-shell nanoparticles is simple and convenient compared with other seed growth methods with NH 4 OH as a mild reductant. In addition, electrochemical experiments indicated that these Au-Pt core-shell nanoparticles had similar electrochemical properties to those of the bulk Pt electrode

  20. The impact of web services at the IRIS DMC

    Science.gov (United States)

    Weekly, R. T.; Trabant, C. M.; Ahern, T. K.; Stults, M.; Suleiman, Y. Y.; Van Fossen, M.; Weertman, B.

    2015-12-01

    The IRIS Data Management Center (DMC) has served the seismological community for nearly 25 years. In that time we have offered data and information from our archive using a variety of mechanisms ranging from email-based to desktop applications to web applications and web services. Of these, web services have quickly become the primary method for data extraction at the DMC. In 2011, the first full year of operation, web services accounted for over 40% of the data shipped from the DMC. In 2014, over ~450 TB of data was delivered directly to users through web services, representing nearly 70% of all shipments from the DMC that year. In addition to handling requests directly from users, the DMC switched all data extraction methods to use web services in 2014. On average the DMC now handles between 10 and 20 million requests per day submitted to web service interfaces. The rapid adoption of web services is attributed to the many advantages they bring. For users, they provide on-demand data using an interface technology, HTTP, that is widely supported in nearly every computing environment and language. These characteristics, combined with human-readable documentation and existing tools make integration of data access into existing workflows relatively easy. For the DMC, the web services provide an abstraction layer to internal repositories allowing for concentrated optimization of extraction workflow and easier evolution of those repositories. Lending further support to DMC's push in this direction, the core web services for station metadata, timeseries data and event parameters were adopted as standards by the International Federation of Digital Seismograph Networks (FDSN). We expect to continue enhancing existing services and building new capabilities for this platform. For example, the DMC has created a federation system and tools allowing researchers to discover and collect seismic data from data centers running the FDSN-standardized services. A future capability

  1. Long-term response to recombinant human growth hormone treatment: a new predictive mathematical method.

    Science.gov (United States)

    Migliaretti, G; Ditaranto, S; Guiot, C; Vannelli, S; Matarazzo, P; Cappello, N; Stura, I; Cavallo, F

    2018-07-01

    Recombinant GH has been offered to GH-deficient (GHD) subjects for more than 30 years, in order to improve height and growth velocity in children and to enhance metabolic effects in adults. The aim of our work is to describe the long-term effect of rhGH treatment in GHD pediatric patients, suggesting a growth prediction model. A homogeneous database is defined for diagnosis and treatment modalities, based on GHD patients afferent to Hospital Regina Margherita in Turin (Italy). In this study, 232 GHD patients are selected (204 idiopathic GHD and 28 organic GHD). Each measure is shown in terms of mean with relative standard deviations (SD) and 95% confidence interval (95% CI). To estimate the final height of each patient on the basis of few measures, a mathematical growth prediction model [based on Gompertzian function and a mixed method based on the radial basis functions (RBFs) and the particle swarm optimization (PSO) models] was performed. The results seem to highlight the benefits of an early start of treatment, further confirming what is suggested by the literature. Generally, the RBF-PSO method shows a good reliability in the prediction of the final height. Indeed, RMSE is always lower than 4, i.e., in average the forecast will differ at most of 4 cm to the real value. In conclusion, the large and accurate database of Italian GHD patients allowed us to assess the rhGH treatment efficacy and compare the results with those obtained in other Countries. Moreover, we proposed and validated a new mathematical model forecasting the expected final height after therapy which was validated on our cohort.

  2. Using Kalman Filter to Guarantee QoS Robustness of Web Server

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The exponential growth of the Internet coupled with the increasing popularity of dynamically generated content on the World Wide Web, has created the need for more and faster Web servers capable of serving the over 100 million Internet users. To converge the control method has emerged as a promising technique to solve the Web QoS problem. In this paper, a model of adaptive session is presented and a session flow self-regulating algorism based on Kalman Filter are proposed towards Web Server. And a Web QoS self-regulating scheme is advanced. To attain the goal of on-line system identification, the optimized estimation of QoS parameters is fulfilled by utilizing Kalman Filter in full domain. The simulation results shows that the proposed scheme can guarantee the QoS with both robustness and stability .

  3. The Art of Memory and the Growth of the Scientific Method

    Directory of Open Access Journals (Sweden)

    Gopal P. Sarma

    2015-07-01

    Full Text Available I argue that European schools of thought on memory and memorization were critical in enabling growth of the scientific method. After giving a historical overview of the development of the memory arts from ancient Greece through 17th century Europe, I describe how the Baconian viewpoint on the scientific method was fundamentally part of a culture and a broader dialogue that conceived of memorization as a foundational methodology for structuring knowledge and for developing symbolic means for representing scientific concepts. The principal figures of this intense and rapidly evolving intellectual milieu included some of the leading thinkers traditionally associated with the scientific revolution; among others, Francis Bacon, Renes Descartes, and Gottfried Leibniz. I close by examining the acceleration of mathematical thought in light of the art of memory and its role in 17th century philosophy, and in particular, Leibniz’s project to develop a universal calculus.

  4. Evaluation of immunological methods for detection of bovine growth hormone (BGH) produced in E. coli

    International Nuclear Information System (INIS)

    Rosner, A.; Zwang, R.; Aviv, H.

    1982-01-01

    The use of several immunological methods for studies on synthesis of bovine growth hormone (BGH) by E. coli is described here. The ELISA procedure was shown to be the least sensitive and unfit for assaying BGH in E. coli extracts. The solid-phase radioimmunoassay (RIA) proved to be highly sensitive, but since E. coli extract itself (not containing BGH) interfered with the immunological reaction, its use for measuring BGH was practically limited. The best adequate procedure proved to be radioimmunoassay in solution, which was not adversely affected by the E. coli extract and was sufficiently sensitive to detect nanogram quantities of BGH. The size of the BGH produced by normal bacterial cells was investigated by protein fractionation, transfer to nitrocellulose paper and detection by anti-BGH serum. This method also served for semi-quantitative determination of BGH in the bacterial extract. (Auth.)

  5. Evaluation of immunological methods for detection of bovine growth hormone (BGH) produced in E. coli

    Energy Technology Data Exchange (ETDEWEB)

    Rosner, A; Zwang, R; Aviv, H [Weizmann Institute of Science, Rehovot (Israel). Dept. of Virology

    1982-07-30

    The use of several immunological methods for studies on synthesis of bovine growth hormone (BGH) by E. coli is described here. The ELISA procedure was shown to be the least sensitive and unfit for assaying BGH in E. coli extracts. The solid-phase radioimmunoassay (RIA) proved to be highly sensitive, but since E. coli extract itself (not containing BGH) interfered with the immunological reaction, its use for measuring BGH was practically limited. The most adequate procedure proved to be radioimmunoassay in solution, which was not adversely affected by the E. coli extract and was sufficiently sensitive to detect nanogram quantities of BGH. The size of the BGH produced by normal bacterial cells was investigated by protein fractionation, transfer to nitrocellulose paper and detection by anti-BGH serum. This method also served for semi-quantitative determination of BGH in the bacterial extract.

  6. A new method to produce macroporous Mg-phosphate bone growth substitutes

    Energy Technology Data Exchange (ETDEWEB)

    Babaie, Elham, E-mail: Elham.Babaie@rockets.utoledo.edu [Department of Biomedical Engineering, University of Toledo, Toledo, OH 43606 (United States); Lin, Boren [Department of Biomedical Engineering, University of Toledo, Toledo, OH 43606 (United States); Bhaduri, Sarit B. [Department of Mechanical, Industrial and Manufacturing Engineering, University of Toledo, Toledo, OH 43606 (United States); Department of Surgery (Dentistry), University of Toledo, Toledo, OH 43614 (United States)

    2017-06-01

    This paper is a sequel to our previous effort in developing Mg-phosphate orthopedic cements using amorphous Mg-phosphate (AMP) as the precursor. In this paper, we report a new real-time in situ technique to create macroporous bone growth substitute (BGS). The method uses biodegradable Mg-particles as the porogen. As opposed to the conventional wisdom of providing corrosion protection layers to biodegradable Mg-alloys, the present method uses the fast corrosion kinetics of Mg to create macropores in real time during the setting of the cement. An aqueous solution of PVA was used as the setting solution. Using this technique, a macroporous cement containing up to 91% porosity is obtained, as determined by pycnometry. Due to formation of H{sub 2} gas bubbles from corrosion of Mg, the cement becomes macroporous. The pore sizes as big as 760 μm were observed. The results of SBF soaking indicated change in crystallinity as confirmed via scanning electron microscopy (SEM) and X-ray diffraction (XRD). Our in vitro cytocompatibility evaluation also revealed that the macroporous bone growth substitute composed of bobierrite is cytocompatible and can improve gene expression. - Highlights: • We report a new real time, in situ technique to fabricate macroporous bone grafts. • Self-corroding Mg granules act as porogens. • Compositions containing AMP and PVA self-set within a reasonable time. • The final bone graft substitute showed promising biocompatibility. • The results provide important information on the porosity content and bioactivity.

  7. Web Based VRML Modelling

    NARCIS (Netherlands)

    Kiss, S.; Sarfraz, M.

    2004-01-01

    Presents a method to connect VRML (Virtual Reality Modeling Language) and Java components in a Web page using EAI (External Authoring Interface), which makes it possible to interactively generate and edit VRML meshes. The meshes used are based on regular grids, to provide an interaction and modeling

  8. Web components and the semantic web

    OpenAIRE

    Casey, Maire; Pahl, Claus

    2003-01-01

    Component-based software engineering on the Web differs from traditional component and software engineering. We investigate Web component engineering activites that are crucial for the development,com position, and deployment of components on the Web. The current Web Services and Semantic Web initiatives strongly influence our work. Focussing on Web component composition we develop description and reasoning techniques that support a component developer in the composition activities,fo cussing...

  9. A new method for evaluating forest thinning: growth dominance in managed Pinus resinosa stands

    Science.gov (United States)

    John B. Bradford; Anthony W. D' Amato; Brian J. Palik; Shawn. Fraver

    2010-01-01

    Growth dominance is a relatively new, simple, quantitative metric of within-stand individual tree growth patterns, and is defined as positive when larger trees in the stand display proportionally greater growth than smaller trees, and negative when smaller trees display proportionally greater growth than larger trees. We examined long-term silvicultural experiments in...

  10. Identification of growth phases and influencing factors in cultivations with AGE1.HN cells using set-based methods.

    Directory of Open Access Journals (Sweden)

    Steffen Borchers

    Full Text Available Production of bio-pharmaceuticals in cell culture, such as mammalian cells, is challenging. Mathematical models can provide support to the analysis, optimization, and the operation of production processes. In particular, unstructured models are suited for these purposes, since they can be tailored to particular process conditions. To this end, growth phases and the most relevant factors influencing cell growth and product formation have to be identified. Due to noisy and erroneous experimental data, unknown kinetic parameters, and the large number of combinations of influencing factors, currently there are only limited structured approaches to tackle these issues. We outline a structured set-based approach to identify different growth phases and the factors influencing cell growth and metabolism. To this end, measurement uncertainties are taken explicitly into account to bound the time-dependent specific growth rate based on the observed increase of the cell concentration. Based on the bounds on the specific growth rate, we can identify qualitatively different growth phases and (in-validate hypotheses on the factors influencing cell growth and metabolism. We apply the approach to a mammalian suspension cell line (AGE1.HN. We show that growth in batch culture can be divided into two main growth phases. The initial phase is characterized by exponential growth dynamics, which can be described consistently by a relatively simple unstructured and segregated model. The subsequent phase is characterized by a decrease in the specific growth rate, which, as shown, results from substrate limitation and the pH of the medium. An extended model is provided which describes the observed dynamics of cell growth and main metabolites, and the corresponding kinetic parameters as well as their confidence intervals are estimated. The study is complemented by an uncertainty and outlier analysis. Overall, we demonstrate utility of set-based methods for analyzing cell

  11. Identification of growth phases and influencing factors in cultivations with AGE1.HN cells using set-based methods.

    Science.gov (United States)

    Borchers, Steffen; Freund, Susann; Rath, Alexander; Streif, Stefan; Reichl, Udo; Findeisen, Rolf

    2013-01-01

    Production of bio-pharmaceuticals in cell culture, such as mammalian cells, is challenging. Mathematical models can provide support to the analysis, optimization, and the operation of production processes. In particular, unstructured models are suited for these purposes, since they can be tailored to particular process conditions. To this end, growth phases and the most relevant factors influencing cell growth and product formation have to be identified. Due to noisy and erroneous experimental data, unknown kinetic parameters, and the large number of combinations of influencing factors, currently there are only limited structured approaches to tackle these issues. We outline a structured set-based approach to identify different growth phases and the factors influencing cell growth and metabolism. To this end, measurement uncertainties are taken explicitly into account to bound the time-dependent specific growth rate based on the observed increase of the cell concentration. Based on the bounds on the specific growth rate, we can identify qualitatively different growth phases and (in-)validate hypotheses on the factors influencing cell growth and metabolism. We apply the approach to a mammalian suspension cell line (AGE1.HN). We show that growth in batch culture can be divided into two main growth phases. The initial phase is characterized by exponential growth dynamics, which can be described consistently by a relatively simple unstructured and segregated model. The subsequent phase is characterized by a decrease in the specific growth rate, which, as shown, results from substrate limitation and the pH of the medium. An extended model is provided which describes the observed dynamics of cell growth and main metabolites, and the corresponding kinetic parameters as well as their confidence intervals are estimated. The study is complemented by an uncertainty and outlier analysis. Overall, we demonstrate utility of set-based methods for analyzing cell growth and

  12. Study Of Soot Growth And Nucleation By A Time-Resolved Synchrotron Radiation Based X-Ray Absorption Method

    National Research Council Canada - National Science Library

    Mitchell, Judith I

    2001-01-01

    This report results from a contract tasking University of Rennes I as follows: The contractor will perform a study of soot growth and nucleation by a time-resolved synchrotron radiation based x-ray absorption method...

  13. Determining individual variation in growth and its implication for life-history and population processes using the empirical Bayes method.

    Directory of Open Access Journals (Sweden)

    Simone Vincenzi

    2014-09-01

    Full Text Available The differences in demographic and life-history processes between organisms living in the same population have important consequences for ecological and evolutionary dynamics. Modern statistical and computational methods allow the investigation of individual and shared (among homogeneous groups determinants of the observed variation in growth. We use an Empirical Bayes approach to estimate individual and shared variation in somatic growth using a von Bertalanffy growth model with random effects. To illustrate the power and generality of the method, we consider two populations of marble trout Salmo marmoratus living in Slovenian streams, where individually tagged fish have been sampled for more than 15 years. We use year-of-birth cohort, population density during the first year of life, and individual random effects as potential predictors of the von Bertalanffy growth function's parameters k (rate of growth and L∞ (asymptotic size. Our results showed that size ranks were largely maintained throughout marble trout lifetime in both populations. According to the Akaike Information Criterion (AIC, the best models showed different growth patterns for year-of-birth cohorts as well as the existence of substantial individual variation in growth trajectories after accounting for the cohort effect. For both populations, models including density during the first year of life showed that growth tended to decrease with increasing population density early in life. Model validation showed that predictions of individual growth trajectories using the random-effects model were more accurate than predictions based on mean size-at-age of fish.

  14. Determining individual variation in growth and its implication for life-history and population processes using the empirical Bayes method.

    Science.gov (United States)

    Vincenzi, Simone; Mangel, Marc; Crivelli, Alain J; Munch, Stephan; Skaug, Hans J

    2014-09-01

    The differences in demographic and life-history processes between organisms living in the same population have important consequences for ecological and evolutionary dynamics. Modern statistical and computational methods allow the investigation of individual and shared (among homogeneous groups) determinants of the observed variation in growth. We use an Empirical Bayes approach to estimate individual and shared variation in somatic growth using a von Bertalanffy growth model with random effects. To illustrate the power and generality of the method, we consider two populations of marble trout Salmo marmoratus living in Slovenian streams, where individually tagged fish have been sampled for more than 15 years. We use year-of-birth cohort, population density during the first year of life, and individual random effects as potential predictors of the von Bertalanffy growth function's parameters k (rate of growth) and L∞ (asymptotic size). Our results showed that size ranks were largely maintained throughout marble trout lifetime in both populations. According to the Akaike Information Criterion (AIC), the best models showed different growth patterns for year-of-birth cohorts as well as the existence of substantial individual variation in growth trajectories after accounting for the cohort effect. For both populations, models including density during the first year of life showed that growth tended to decrease with increasing population density early in life. Model validation showed that predictions of individual growth trajectories using the random-effects model were more accurate than predictions based on mean size-at-age of fish.

  15. Effect of 4 years of growth hormone therapy in children with Noonan syndrome in the American Norditropin Studies: Web-Enabled Research (ANSWER Program® registry

    Directory of Open Access Journals (Sweden)

    Lee Peter A

    2012-06-01

    Full Text Available Abstract Background Noonan syndrome (NS is a genetic disorder characterized by phenotypic features, including facial dysmorphology, cardiovascular anomalies, and short stature. Growth hormone (GH has been approved by the United States Food and Drug Administration for short stature in children with NS. The objective of this analysis was to assess the height standard deviation score (HSDS and change in HSDS (ΔHSDS for up to 4 years (Y4 of GH therapy in children with NS. Methods The American Norditropin Studies: Web-Enabled Research (ANSWER Program®, a US-based registry, collects long-term efficacy and safety information on patients treated with Norditropin® (somatropin rDNA origin, Novo Nordisk A/S at the discretion of participating physicians. A total of 120 children (90 boys, 30 girls with NS, naïve to previous GH treatment, were included in this analysis. Results The mean (SD baseline age of subjects (n = 120 was 9.2 (3.8 years. Mean (SD HSDS increased from –2.65 (0.73 at baseline to –1.32 (1.11 at Y4 (n = 17. Subjects showed continued increase in HSDS from baseline to Y4 without significant differences between genders at Y1 or Y2. The mean (SD GH dose was 47 (11 mcg/kg/day at baseline and 59 (16 mcg/kg/day at Y4. There was a negative correlation between baseline age and ΔHSDS at Y1 (R = –0.3156; P = 0.0055 and Y2 (R = –0.3394; P = 0.017. ΔHSDS at Y1 was significantly correlated with ΔHSDS at Y2 (n = 37; R = 0.8527, P  Conclusions GH treatment-naïve patients with NS showed continued increases in HSDS during 4 years of treatment with GH with no significant differences between genders up to 2 years. Baseline age was negatively correlated with ΔHSDS at Y1 and Y2. Whether long-term therapy in NS results in continued increase in HSDS to adult height remains to be investigated. Trial registration ClinicalTrials.gov NCT01009905

  16. Association and Sequence Mining in Web Usage

    Directory of Open Access Journals (Sweden)

    Claudia Elena DINUCA

    2011-06-01

    Full Text Available Web servers worldwide generate a vast amount of information on web users’ browsing activities. Several researchers have studied these so-called clickstream or web access log data to better understand and characterize web users. Clickstream data can be enriched with information about the content of visited pages and the origin (e.g., geographic, organizational of the requests. The goal of this project is to analyse user behaviour by mining enriched web access log data. With the continued growth and proliferation of e-commerce, Web services, and Web-based information systems, the volumes of click stream and user data collected by Web-based organizations in their daily operations has reached astronomical proportions. This information can be exploited in various ways, such as enhancing the effectiveness of websites or developing directed web marketing campaigns. The discovered patterns are usually represented as collections of pages, objects, or re-sources that are frequently accessed by groups of users with common needs or interests. The focus of this paper is to provide an overview how to use frequent pattern techniques for discovering different types of patterns in a Web log database. In this paper we will focus on finding association as a data mining technique to extract potentially useful knowledge from web usage data. I implemented in Java, using NetBeans IDE, a program for identification of pages’ association from sessions. For exemplification, we used the log files from a commercial web site.

  17. Measuring the learning effectiveness of Web-based teacher professional development in the hypothesis based learning method of teaching science

    Science.gov (United States)

    Wilson, Penne L.

    2007-12-01

    This study was conducted as part of the five year evaluation of the Star Schools grant awarded to Oklahoma State University for the development on online teacher professional development in the Hypothesis Based Learning (HbL) method of science instruction. Participants in this research were five teachers who had completed the online workshop, submitted a lesson plan, and who allowed this researcher and other members of the University of New Mexico Evaluation Team into their classrooms to observe and to determine if the learning of the method from the online HbL workshop had translated into practice. These teachers worked in inner city, suburban, metropolitan, and rural communities in the U.S. Southwest. This study was conducted to determine if teachers learned the HbL method from the online HbL workshop, to examine the relationship of satisfaction to learning, and to determine the elements of the online workshop that led to teacher learning. To measure learning of HbL, three different assessment instruments were used: embedded assessments within the online HbL workshop that gave teachers a scenario and asked them to generate questions to facilitate the HbL process; the analysis of a lesson plan provided by teachers using a science concept that they wished to incorporate in their curriculum using an HbL lesson template provided at the HbL website; and, observations of teachers facilitating the HbL process conducted at three different times during the year that they began the HbL online workshop. To determine if teachers were satisfied with the learning environment, the online HbL workshop, and the product, HbL Method for Teaching Science, and to determine if teachers could identify the elements of the online workshop that led to learning, interviews with the participants were conducted. The research findings were presented in two parts: Part I is an analysis of data provided by the assessment instruments and a content analysis of the transcripts of the teacher

  18. Evaporation kinetics in the hanging drop method of protein crystal growth

    Science.gov (United States)

    Baird, James K.; Frieden, Richard W.; Meehan, E. J., Jr.; Twigg, Pamela J.; Howard, Sandra B.; Fowlis, William A.

    1987-01-01

    An engineering analysis of the rate of evaporation of solvent in the hanging drop method of protein crystal growth is presented; these results are applied to 18 different drop and well arrangements commonly encountered in the laboratory, taking into account the chemical nature of the salt, the drop size and shape, the drop concentration, the well size, the well concentration, and the temperature. It is found that the rate of evaporation increases with temperature, drop size, and with the salt concentration difference between the drop and the well. The evaporation possesses no unique half-life. Once the salt in the drop achieves about 80 percent of its final concentration, further evaporation suffers from the law of diminishing returns.

  19. Growth of polyaniline nanofibers for supercapacitor applications using successive ionic layer adsorption and reaction (SILAR) method

    Energy Technology Data Exchange (ETDEWEB)

    Deshmukh, P. R.; Pusawale, S. N.; Shinde, N. M.; Lokhande, C. D. [Shivaji University, Kolhapur (India)

    2014-07-15

    We report the synthesis of polyaniline nanofibers using the successive ionic layer adsorption and reaction (SILAR) method. The structural study shows the amorphous nature of polyaniline. The formation of polyaniline nanofibers has been revealed by scanning electron microscopy (SEM) whereas the confirmation of polyaniline material is obtained from Fourier transform infrared (FT-IR) spectroscopy. A plausible explanation illustrating the growth mechanism is presented. A maximum specific capacitance of 1078 F·g{sup -1} at a scan rate of 5 mV·s{sup -1} is obtained. The charge-discharge behavior shows a maximum specific power of 1.2 kW·kg{sup -1} and specific energy of 64 Wh·kg{sup -1}. The ease of the synthesis and the interesting electrochemical properties indicate that polyaniline nanofibers are promising materials for supercapacitor applications.

  20. Growth of polyaniline nanofibers for supercapacitor applications using successive ionic layer adsorption and reaction (SILAR) method

    International Nuclear Information System (INIS)

    Deshmukh, P. R.; Pusawale, S. N.; Shinde, N. M.; Lokhande, C. D.

    2014-01-01

    We report the synthesis of polyaniline nanofibers using the successive ionic layer adsorption and reaction (SILAR) method. The structural study shows the amorphous nature of polyaniline. The formation of polyaniline nanofibers has been revealed by scanning electron microscopy (SEM) whereas the confirmation of polyaniline material is obtained from Fourier transform infrared (FT-IR) spectroscopy. A plausible explanation illustrating the growth mechanism is presented. A maximum specific capacitance of 1078 F·g -1 at a scan rate of 5 mV·s -1 is obtained. The charge-discharge behavior shows a maximum specific power of 1.2 kW·kg -1 and specific energy of 64 Wh·kg -1 . The ease of the synthesis and the interesting electrochemical properties indicate that polyaniline nanofibers are promising materials for supercapacitor applications.

  1. On a separating method for mixed-modes crack growth in wood material using image analysis

    Science.gov (United States)

    Moutou Pitti, R.; Dubois, F.; Pop, O.

    2010-06-01

    Due to the complex wood anatomy and the loading orientation, the timber elements are subjected to a mixed-mode fracture. In these conditions, the crack tip advance is characterized by mixed-mode kinematics. In order to characterize the fracture process function versus the loading orientation, a new mixed-mode crack growth timber specimen is proposed. In the present paper, the design process and the experimental validation of this specimen are proposed. Using experimental results, the energy release rate is calculated for several modes. The calculi consist on the separation of each fracture mode. The design of the specimen is based on the analytical approach and numerical simulation by finite element method. The specimen particularity is the stability of the crack propagation under a force control.

  2. Using growth-based methods to determine direct effects of salinity on soil microbial communities

    Science.gov (United States)

    Rath, Kristin; Rousk, Johannes

    2015-04-01

    Soil salinization is a widespread agricultural problem and increasing salt concentrations in soils have been found to be correlated with decreased microbial activity. A central challenge in microbial ecology is to link environmental factors, such as salinity, to responses in the soil microbial community. That is, it can be difficult to distinguish direct from indirect effects. In order to determine direct salinity effects on the community we employed the ecotoxicological concept of Pollution-Induced Community Tolerance (PICT). This concept is built on the assumption that if salinity had an ecologically relevant effect on the community, it should have selected for more tolerant species and strains, resulting in an overall higher community tolerance to salt in communities from saline soils. Growth-based measures, such as the 3H-leucine incorporation into bacterial protein , provide sensitive tools to estimate community tolerance. They can also provide high temporal resolution in tracking changes in tolerance over time. In our study we used growth-based methods to investigate: i) at what levels of salt exposure and over which time scales salt tolerance can be induced in a non-saline soil, and (ii) if communities from high salinity sites have higher tolerance to salt exposure along natural salinity gradients. In the first part of the study, we exposed a non-saline soil to a range of salinities and monitored the development of community tolerance over time. We found that community tolerance to intermediate salinities up to around 30 mg NaCl per g soil can be induced at relatively short time scales of a few days, providing evidence that microbial communities can adapt rapidly to changes in environmental conditions. In the second part of the study we used soil samples originating from natural salinity gradients encompassing a wide range of salinity levels, with electrical conductivities ranging from 0.1 dS/m to >10 dS/m. We assessed community tolerance to salt by

  3. Growth and characterization of magnetite-maghemite thin films by the dip coating method

    Energy Technology Data Exchange (ETDEWEB)

    Velásquez, A. A., E-mail: avelas26@eafit.edu.edu.co; Arnedo, A. [Universidad EAFIT, Grupo de Electromagnetismo Aplicado (Colombia)

    2017-11-15

    We present the process of growth and characterization of magnetite-maghemite thin films obtained by the dip coating method. The thin films were deposited on glass substrates, using a ferrofluid of nanostructured magnetite-maghemite particles as precursor solution. During the growth of the films the following parameters were controlled: number of dips of the substrates, dip velocity of the substrates and drying times. The films were characterized by Atomic Force Microscopy, Scanning Elelectron Microscopy, four-point method for resistance measurement, Room Temperature Mössbauer Spectroscopy and Hall effect. Mössbauer measurements showed the presence of a sextet attributed to maghemite (γ-Fe{sub 2}O{sub 3}) and two doublets attributed to superparamagnetic magnetite (Fe{sub 3}O{sub 4}), indicating a distribution of oxidation states of the iron as well as a particle size distribution of the magnetic phases in the films. Atomic force microscopy measurements showed that the films cover quasi uniformly the substrates, existing in them some pores with sub-micron size. Scanning Electron Microscopy measurements showed a uniform structure in the films, with spherical particles with size around 10 nm. Voltage versus current measurements showed an ohmic response of the films for currents between 0 and 100 nA. On the other hand, Hall effect measurements showed a nonlinear response of the Hall voltage with the magnetic flux density applied perpendicular to the plane of the films, however the response is fairly linear for magnetic flux densities between 0.15 and 0.35 T approximately. The results suggest that the films are promising for application as magnetic flux density sensors.

  4. Growth and characterization of magnetite-maghemite thin films by the dip coating method

    International Nuclear Information System (INIS)

    Velásquez, A. A.; Arnedo, A.

    2017-01-01

    We present the process of growth and characterization of magnetite-maghemite thin films obtained by the dip coating method. The thin films were deposited on glass substrates, using a ferrofluid of nanostructured magnetite-maghemite particles as precursor solution. During the growth of the films the following parameters were controlled: number of dips of the substrates, dip velocity of the substrates and drying times. The films were characterized by Atomic Force Microscopy, Scanning Elelectron Microscopy, four-point method for resistance measurement, Room Temperature Mössbauer Spectroscopy and Hall effect. Mössbauer measurements showed the presence of a sextet attributed to maghemite (γ-Fe_2O_3) and two doublets attributed to superparamagnetic magnetite (Fe_3O_4), indicating a distribution of oxidation states of the iron as well as a particle size distribution of the magnetic phases in the films. Atomic force microscopy measurements showed that the films cover quasi uniformly the substrates, existing in them some pores with sub-micron size. Scanning Electron Microscopy measurements showed a uniform structure in the films, with spherical particles with size around 10 nm. Voltage versus current measurements showed an ohmic response of the films for currents between 0 and 100 nA. On the other hand, Hall effect measurements showed a nonlinear response of the Hall voltage with the magnetic flux density applied perpendicular to the plane of the films, however the response is fairly linear for magnetic flux densities between 0.15 and 0.35 T approximately. The results suggest that the films are promising for application as magnetic flux density sensors.

  5. On the evaluation of Web Radio

    OpenAIRE

    Field, A.N.; Hartel, Pieter H.

    2001-01-01

    We develop an evaluation method for Web radio, and perform it to see what we can be learnt about seven prominent Web radio sites. We also evaluate a commercial FM radio station for control purposes. We present a taxonomy of Web radio, and we give our observations and conclusions on this evaluation.

  6. The Spine of the Cosmic Web

    NARCIS (Netherlands)

    Aragón-Calvo, Miguel A.; Platen, Erwin; van de Weijgaert, Rien; Szalay, Alexander S.

    We present the SpineWeb framework for the topological analysis of the Cosmic Web and the identification of its walls, filaments, and cluster nodes. Based on the watershed segmentation of the cosmic density field, the SpineWeb method invokes the local adjacency properties of the boundaries between

  7. The Spine of the Cosmic Web

    NARCIS (Netherlands)

    Aragón-Calvo, Miguel A.; Platen, Erwin; van de Weijgaert, Rien; Szalay, Alexander S.

    2010-01-01

    We present the SpineWeb framework for the topological analysis of the Cosmic Web and the identification of its walls, filaments, and cluster nodes. Based on the watershed segmentation of the cosmic density field, the SpineWeb method invokes the local adjacency properties of the boundaries between

  8. Effect of fertilization methods on growth of pear trees, yielding and fruit quality

    Directory of Open Access Journals (Sweden)

    Tomasz Lipa

    2013-04-01

    Full Text Available The experiment was carried out in the commercial orchard near Lublin on five-year old pear trees of two cultivars: ‘Conference’and ‘Lukasowka’, planted on Quince MA. The objective of the study was evaluated the reaction of pear on the method of application of fertilizers. In the early spring the surface broadcasting of fertilizers was used (N – 71,5 kg, P 2O5 – 33,0 kg, K 2 O – 114,0 kg and from the May to the middle of August the fertigation was applied (N – 76,4 kg, P 2O5 – 49,5 kg, K 2 O – 84,2 kg. Method of fertilizer’s applications had no significant effect on the growth of evaluated trees. There were no differences in quantity of yield in dependence on the method of fertilization. In the case of cv. ‘Lukasowka’the beneficial influence of the way of fertilization on morphology of fruits (their diameter, height and mass was stated. Such an effect was not observed in the case of the ‘Conference’.

  9. Study on the Growth of Holes in Cold Spraying via Numerical Simulation and Experimental Methods

    Directory of Open Access Journals (Sweden)

    Guosheng Huang

    2016-12-01

    Full Text Available Cold spraying is a promising method for rapid prototyping due to its high deposition efficiency and high-quality bonding characteristic. However, many researchers have noticed that holes cannot be replenished and will grow larger and larger once formed, which will significantly decrease the deposition efficiency. No work has yet been done on this problem. In this paper, a computational simulation method was used to investigate the origins of these holes and the reasons for their growth. A thick copper coating was deposited around the pre-drilled, micro-size holes using a cold spraying method on copper substrate to verify the simulation results. The results indicate that the deposition efficiency inside the hole decreases as the hole become deeper and narrower. The repellant force between the particles perpendicular to the impaction direction will lead to porosity if the particles are too close. There is a much lower flattening ratio for successive particles if they are too close at the same location, because the momentum energy contributes to the former particle’s deformation. There is a high probability that the above two phenomena, resulting from high powder-feeding rate, will form the original hole, which will grow larger and larger once it is formed. It is very important to control the powder feeding rate, but the upper limit is yet to be determined by further simulation and experimental investigation.

  10. Effectiveness of the cervical vertebral maturation method to predict postpeak circumpubertal growth of craniofacial structures.

    Science.gov (United States)

    Fudalej, Piotr; Bollen, Anne-Marie

    2010-01-01

    Our aim was to assess effectiveness of the cervical vertebral maturation (CVM) method to predict circumpubertal craniofacial growth in the postpeak period. The CVM stage was determined in 176 subjects (51 adolescent boys and 125 adolescent girls) on cephalograms taken at the end of treatment (T2; mean ages, 15.75 years [boys] and 15.23 years [girls]) in subjects from the postretention database at the University of Washington in Seattle. Craniofacial growth was evaluated from the following measurements on cephalograms at T2 and end of follow-up (T3) (mean ages, 29.01 years [men] and 28.08 years [women]): condylion to gnathion, condylion to gonion, gonion to gnathion, sella to gnathion, nasion to menton, anterior nasal spine to menton, and sella to gonion. The change of each variable from T2 to T3 was assessed with paired t tests. Parametric (t tests or analysis of variance [ANOVA]) or nonparametric (Mann-Whitney or Kruskal-Wallis) tests were used to detect intergroup differences. One hundred eight subjects (35 boys, 73 girls) demonstrated CVM stage 3, 56 (16 boys, 40 girls) were in CVM stage 4, and 12 (all girls) were in CVM stage 5 at T2. Intrasex comparisons showed that boys in CVM stages 3 and 4 could be differentiated regarding changes of all variables. In the girls, only those in CVM stages 3 and 4 could be differentiated based on the amount of changes of 2 measurements: condylion to gonion and sella to gonion. Intersex comparisons showed that boys in CVM stage 3 had significantly more changes than girls (P <0.01). Boys in CVM stage 4 showed significant differences compared with girls in CVM stage 4 for only 2 variables (sella to gonion and condylion to gonion; P <0.001 and P = 0.012, respectively). The CVM method was modestly effective in determining the amount of postpeak circumpubertal craniofacial growth. Copyright 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  11. Effect of culture methods on individual variation in the growth of sea cucumber Apostichopus japonicus within a cohort and family

    Science.gov (United States)

    Qiu, Tianlong; Zhang, Libin; Zhang, Tao; Bai, Yucen; Yang, Hongsheng

    2014-07-01

    There is substantial individual variation in the growth rates of sea cucumber Apostichopus japonicus individuals. This necessitates additional work to grade the seed stock and lengthens the production period. We evaluated the influence of three culture methods (free-mixed, isolated-mixed, isolated-alone) on individual variation in growth and assessed the relationship between feeding, energy conversion efficiency, and individual growth variation in individually cultured sea cucumbers. Of the different culture methods, animals grew best when reared in the isolated-mixed treatment (i.e., size classes were held separately), though there was no difference in individual variation in growth between rearing treatment groups. The individual variation in growth was primarily attributed to genetic factors. The difference in food conversion efficiency caused by genetic differences among individuals was thought to be the origin of the variance. The level of individual growth variation may be altered by interactions among individuals and environmental heterogeneity. Our results suggest that, in addition to traditional seed grading, design of a new kind of substrate that changes the spatial distribution of sea cucumbers would effectively enhance growth and reduce individual variation in growth of sea cucumbers in culture.

  12. Usare WebDewey

    OpenAIRE

    Baldi, Paolo

    2016-01-01

    This presentation shows how to use the WebDewey tool. Features of WebDewey. Italian WebDewey compared with American WebDewey. Querying Italian WebDewey. Italian WebDewey and MARC21. Italian WebDewey and UNIMARC. Numbers, captions, "equivalente verbale": Dewey decimal classification in Italian catalogues. Italian WebDewey and Nuovo soggettario. Italian WebDewey and LCSH. Italian WebDewey compared with printed version of Italian Dewey Classification (22. edition): advantages and disadvantages o...

  13. Semantic Web

    Directory of Open Access Journals (Sweden)

    Anna Lamandini

    2011-06-01

    Full Text Available The semantic Web is a technology at the service of knowledge which is aimed at accessibility and the sharing of content; facilitating interoperability between different systems and as such is one of the nine key technological pillars of TIC (technologies for information and communication within the third theme, programme specific cooperation of the seventh programme framework for research and development (7°PQRS, 2007-2013. As a system it seeks to overcome overload or excess of irrelevant information in Internet, in order to facilitate specific or pertinent research. It is an extension of the existing Web in which the aim is for cooperation between and the computer and people (the dream of Sir Tim Berners –Lee where machines can give more support to people when integrating and elaborating data in order to obtain inferences and a global sharing of data. It is a technology that is able to favour the development of a “data web” in other words the creation of a space in both sets of interconnected and shared data (Linked Data which allows users to link different types of data coming from different sources. It is a technology that will have great effect on everyday life since it will permit the planning of “intelligent applications” in various sectors such as education and training, research, the business world, public information, tourism, health, and e-government. It is an innovative technology that activates a social transformation (socio-semantic Web on a world level since it redefines the cognitive universe of users and enables the sharing not only of information but of significance (collective and connected intelligence.

  14. Web 2.0 (and Beyond)

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2015-01-01

    textabstractWeb 2.0 is a term coined to mark a new era of Internet usage driven by user interactivity and collaboration in generating content, moving away from the static information dissemination model associated with Web 1.0. It became common in early 2000 with the growth of social network sites,

  15. Life cycle and population growth rate of Caenorhabditis elegans studied by a new method.

    Science.gov (United States)

    Muschiol, Daniel; Schroeder, Fabian; Traunspurger, Walter

    2009-05-16

    The free-living nematode Caenorhabditis elegans is the predominant model organism in biological research, being used by a huge number of laboratories worldwide. Many researchers have evaluated life-history traits of C. elegans in investigations covering quite different aspects such as ecotoxicology, inbreeding depression and heterosis, dietary restriction/supplement, mutations, and ageing. Such traits include juvenile growth rates, age at sexual maturity, adult body size, age-specific fecundity/mortality, total reproduction, mean and maximum lifespan, and intrinsic population growth rates. However, we found that in life-cycle experiments care is needed regarding protocol design. Here, we test a recently developed method that overcomes some problems associated with traditional cultivation techniques. In this fast and yet precise approach, single individuals are maintained within hanging drops of semi-fluid culture medium, allowing the simultaneous investigation of various life-history traits at any desired degree of accuracy. Here, the life cycles of wild-type C. elegans strains N2 (Bristol, UK) and MY6 (Münster, Germany) were compared at 20 degrees C with 5 x 10(9) Escherichia coli ml-1 as food source. High-resolution life tables and fecundity schedules of the two strains are presented. Though isolated 700 km and 60 years apart from each other, the two strains barely differed in life-cycle parameters. For strain N2 (n = 69), the intrinsic rate of natural increase (r m d(-1)), calculated according to the Lotka equation, was 1.375, the net reproductive rate (R 0) 291, the mean generation time (T) 90 h, and the minimum generation time (T min) 73.0 h. The corresponding values for strain MY6 (n = 72) were r m = 1.460, R0 = 289, T = 84 h, and T min = 67.3 h. Peak egg-laying rates in both strains exceeded 140 eggs d(-1). Juvenile and early adulthood mortality was negligible. Strain N2 lived, on average, for 16.7 d, while strain MY6 died 2 days earlier; however

  16. Life cycle and population growth rate of Caenorhabditis elegans studied by a new method

    Directory of Open Access Journals (Sweden)

    Schroeder Fabian

    2009-05-01

    Full Text Available Abstract Background The free-living nematode Caenorhabditis elegans is the predominant model organism in biological research, being used by a huge number of laboratories worldwide. Many researchers have evaluated life-history traits of C. elegans in investigations covering quite different aspects such as ecotoxicology, inbreeding depression and heterosis, dietary restriction/supplement, mutations, and ageing. Such traits include juvenile growth rates, age at sexual maturity, adult body size, age-specific fecundity/mortality, total reproduction, mean and maximum lifespan, and intrinsic population growth rates. However, we found that in life-cycle experiments care is needed regarding protocol design. Here, we test a recently developed method that overcomes some problems associated with traditional cultivation techniques. In this fast and yet precise approach, single individuals are maintained within hanging drops of semi-fluid culture medium, allowing the simultaneous investigation of various life-history traits at any desired degree of accuracy. Here, the life cycles of wild-type C. elegans strains N2 (Bristol, UK and MY6 (Münster, Germany were compared at 20°C with 5 × 109 Escherichia coli ml-1 as food source. Results High-resolution life tables and fecundity schedules of the two strains are presented. Though isolated 700 km and 60 years apart from each other, the two strains barely differed in life-cycle parameters. For strain N2 (n = 69, the intrinsic rate of natural increase (rmd-1, calculated according to the Lotka equation, was 1.375, the net reproductive rate (R0 291, the mean generation time (T 90 h, and the minimum generation time (Tmin 73.0 h. The corresponding values for strain MY6 (n = 72 were rm = 1.460, R0 = 289, T = 84 h, and Tmin = 67.3 h. Peak egg-laying rates in both strains exceeded 140 eggs d-1. Juvenile and early adulthood mortality was negligible. Strain N2 lived, on average, for 16.7 d, while strain MY6 died 2 days

  17. Semantic Web Requirements through Web Mining Techniques

    OpenAIRE

    Hassanzadeh, Hamed; Keyvanpour, Mohammad Reza

    2012-01-01

    In recent years, Semantic web has become a topic of active research in several fields of computer science and has applied in a wide range of domains such as bioinformatics, life sciences, and knowledge management. The two fast-developing research areas semantic web and web mining can complement each other and their different techniques can be used jointly or separately to solve the issues in both areas. In addition, since shifting from current web to semantic web mainly depends on the enhance...

  18. The effect of cutting origin and organic plant growth regulator on the growth of Daun Ungu (Graptophyllum pictum) through stem cutting method

    Science.gov (United States)

    Pratama, S. P.; Yunus, A.; Purwanto, E.; Widyastuti, Y.

    2018-03-01

    Graptophyllum pictum is one of medical plants which has important chemical content to treat diseases. Leaf, bark and flower can be used to facilitate menstruation, treat hemorrhoid, constipation, ulcers, ulcers, swelling, and earache. G. pictum is difficult to propagated by seedling due to the long duration of seed formation, thusvegetative propagation is done by stem cutting. The aims of this study are to obtain optimum combination of cutting origin and organic plant growth regulator in various consentration for the growth of Daun Ungu through stem cutting method. This research was conducted at Research center for Medicinal Plant and Traditional DrugTanjungsari, Tegal Gede, Karanganyar in June to August 2016. Origin of cuttings and organic plant growth regulator were used as treatments factor. A completely randomized design (RAL) is used and data were analyzed by F test (ANOVA) with a confidence level of 95%. Any significant differences among treatment followed with Duncan test at a = 5%. The research indicates that longest root was resulted from the treatment of 0,5 ml/l of organic plant growth regulator. The treatment of 1 ml/l is able to increase the fresh and dry weight of root, treatment of 1,5 ml/l of organic plant growth regulator was able to increase the percentage of growing shoots. Treatment of base part as origin of cuttings increases the length, fresh weight and and dry weight of shoot, increase the number of leaves. Interaction treatment between 1 ml/l consentration of organic plant growth regulator and central part origin of cuttings is capable of increasing the leaf area, whereas treatment without organic plant growth regulator and base part as planting material affects the smallest leaf area.

  19. Use of the Delphi method for determining community growth goals inventory: the Nashville experience

    Science.gov (United States)

    Vishwa K. Varma

    1977-01-01

    The author discusses the growth-inducing pressures on Nashville, Tennessee, describes the application of the Delphi technique to develop an inventory of the community's growth goals, and suggests that the development of a list of community goals is a necessary first step toward growth management.

  20. Crack growth prediction method considering interaction between multiple cracks. Growth of surface cracks of dissimilar size under cyclic tensile and bending load

    International Nuclear Information System (INIS)

    Kamaya, Masayuki; Miyokawa, Eiichi; Kikuchi, Masanori

    2011-01-01

    When multiple cracks approach one another, the stress intensity factor is likely to change due to the interaction of the stress field. This causes change in growth rate and shape of cracks. In particular, when cracks are in parallel position to the loading direction, the shape of cracks becomes non-planar. In this study, the complex growth of interacting cracks is evaluated by using the S-Version finite element method, in which local detailed finite element mesh (local mesh) is superposed on coarse finite element model (global mesh) representing the global structure. In order to investigate the effect of interaction on the growth behavior, two parallel surface cracks are subjected to cyclic tensile or bending load. It is shown that the smaller crack is shielded by larger crack due to the interaction and stops growing when the difference in size of two cracks is significant. Based on simulations of various conditions, a procedure and criteria for evaluating crack growth for fitness-for-service assessment is proposed. According to the procedure, the interaction is not necessary to be considered in the crack growth prediction when the difference in size of two cracks exceeds the criterion. (author)

  1. Responsive web design workflow

    OpenAIRE

    LAAK, TIMO

    2013-01-01

    Responsive Web Design Workflow is a literature review about Responsive Web Design, a web standards based modern web design paradigm. The goals of this research were to define what responsive web design is, determine its importance in building modern websites and describe a workflow for responsive web design projects. Responsive web design is a paradigm to create adaptive websites, which respond to the properties of the media that is used to render them. The three key elements of responsi...

  2. Vertically aligned carbon nanotube growth by pulsed laser deposition and thermal chemical vapor deposition methods

    International Nuclear Information System (INIS)

    Sohn, Jung Inn; Nam, Chunghee; Lee, Seonghoon

    2002-01-01

    We have grown vertically aligned carbon nanotubes on the various substrates such as a planar p-type Si(1 0 0) wafer, porous Si wafer, SiO 2 , Si 3 N 4 , Al 2 O 3 , and Cr by thermal chemical vapor deposition (CVD) at 800 deg.C, using C 2 H 2 gas as a carbon source and Fe catalyst films deposited by a pulsed laser on the substrates. The Fe films were deposited for 5 min by pulsed laser deposition (PLD). The advantage of Fe deposition by PLD over other deposition methods lies in the superior adhesion of Fe to a Si substrate due to high kinetic energies of the generated Fe species. Scanning electron microscopy (SEM) images show that vertically well-aligned carbon nanotubes are grown on Fe nanoparticles formed from the thermal annealing of the Fe film deposited by PLD on the various substrates. Atomic force microscopy (AFM) images show that the Fe film annealed at 800 deg.C is broken to Fe nanoparticles of 10-50 nm in size. We show that the appropriate density of Fe nanoparticles formed from the thermal annealing of the film deposited by PLD is crucial in growing vertically aligned carbon nanotubes. Using a PLD and a lift-off method, we developed the selective growth of carbon nanotubes on a patterned Fe-coated Si substrate

  3. ZnO crystal growth on microelectrode by electrochemical deposition method

    International Nuclear Information System (INIS)

    Kondo, Y; Ashida, A; Nouzu, N; Fujimura, N

    2011-01-01

    Zinc Oxide crystals were grown by constant potential electrochemical deposition method on the substrate with the Pt working electrode which consists of Pt film with large area and μm-sized line and space structured area. In case of depositions with cathodic potential of -0.3V, ZnO crystal is not observed on the micro electrode, but observed on the electrode with large area (0.2 cm 2 ). By using electrolyte with higher pH, ZnO crystal grows on both areas. In case of lower pH, ZnO crystal does not grow on either. From these results, the pH range for growth of ZnO on the microelectrode seems to be higher than that on the electrode with large area. And, it is expected that the pH just on the surface of μm-sized electrode is lower than that in the bulk of electrolyte. Based on these results, it can be concluded that control of the pH in vicinity of the surface is very important to ECD method for micro- and nano-scaled devices.

  4. A method for analyzing changing prison populations: explaining the growth of the elderly in prison.

    Science.gov (United States)

    Luallen, Jeremy; Kling, Ryan

    2014-12-01

    For the past several decades, the U.S. prison system has witnessed a steady and persistent increase in the ages of prison populations. Given the additional costs and burdens placed on prisons as they house older inmates, this aging trend has generated intense interest among policy makers and academics who seek to understand why prison populations are getting older. This article presents a method for evaluating drivers influencing the change in age distributions among prisoners. We define a methodological approach and demonstrate its application using prison data from four states reporting to the Bureau of Justice Statistics' National Corrections Reporting Program. We find that since 2000, the primary driver of overall growth in the elderly populations in prison (defined as inmates over 50) is the increasing admission age of offenders entering prison. Moreover, changes in offense mix and sentence length/time served over the last decade have had significantly less influence on the age composition of prison populations. We also find that the impact of explanatory factors varies across states and offense types. For example, prison admission and exit rates explain much of the change in elderly drug offenders in New York, but not elderly violent offenders, where admission age plays a much stronger explanatory role. Our analysis offers an effective demonstration that supports the use of this method as an important and informative first step toward understanding components of change that affect the problem of prison aging. © The Author(s) 2014.

  5. Gold nanoparticle growth control - Implementing novel wet chemistry method on silicon substrate

    KAUST Repository

    Al-Ameer, Ammar

    2013-04-01

    Controlling particle size, shape, nucleation, and self-assembly on surfaces are some of the main challenges facing electronic device fabrication. In this work, growth of gold nanoparticles over a wide range of sizes was investigated by using a novel wet chemical method, where potassium iodide is used as the reducing solution and gold chloride as the metal precursor, on silicon substrates. Four parameters were studied: soaking time, solution temperature, concentration of the solution of gold chloride, and surface pre-treatment of the substrate. Synthesized nanoparticles were then characterized using scanning electron microscopy (SEM). The precise control of the location and order of the grown gold overlayer was achieved by using focused ion beam (FIB) patterning of a silicon surface, pre-treated with potassium iodide. By varying the soaking time and temperature, different particle sizes and shapes were obtained. Flat geometrical shapes and spherical shapes were observed. We believe, that the method described in this work is potentially a straightforward and efficient way to fabricate gold contacts for microelectronics. © 2013 IEEE.

  6. Growth and properties of ZnO films on polymeric substrate by spray pyrolysis method

    Energy Technology Data Exchange (ETDEWEB)

    Kriisa, Merike; Kärber, Erki [Department of Materials Science, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Krunks, Malle, E-mail: malle.krunks@ttu.ee [Department of Materials Science, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Mikli, Valdek [Centre for Materials Research, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Unt, Tarmo; Kukk, Mart; Mere, Arvo [Department of Materials Science, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia)

    2014-03-31

    The growth of ZnO layers deposited by spray pyrolysis on polymeric substrate was studied. Zinc acetate precursor solution was sprayed onto preheated polyimide (PI) and glass reference substrates at 380 °C. The structural, morphological, optical and electrical properties of the layers were measured by X-ray diffraction, scanning electron microscopy, optical spectroscopy and van der Pauw and Hall method. ZnO:In layers could be grown on PI when deposited onto undoped ZnO layer acting as a buffer layer on PI. Independent of the substrate type, the ZnO/ZnO:In bilayer showed a mixed morphology from smooth canvas-like surface to large scrolled belt grains dependent on buffer layer morphology. Due to the formation of scrolled belts, the ZnO:In layer shows no preferential orientation, yet the preferred orientation of the ZnO buffer crystallites is (100) plane parallel to the substrate. The bilayers deposited on PI exhibit high light scattering capability (haze factor of 85–95% in the spectral region of 350–1500 nm). The resistivity of the ZnO:In film in bilayer on PI is 4.4 × 10{sup −2} Ω cm mainly due to low carrier mobility of 1.5 cm{sup 2}/Vs, the carrier concentration is 10{sup 20} cm{sup −3}. - Highlights: • ZnO:In layers were grown on polyimide substrate by spray pyrolysis. • The buffer layer morphology is controlled by the layer thickness and spray rate. • ZnO/ZnO:In bilayer morphology is dependent on the surface of buffer layer. • Rough buffer layer leads to rough bilayer with scrolled belts (diameter of 2–6 μm). • Due to scrolled belts layers show no preferential growth yet highly scatter light.

  7. Maintaining Web Cache Coherency

    Directory of Open Access Journals (Sweden)

    2000-01-01

    Full Text Available Document coherency is a challenging problem for Web caching. Once the documents are cached throughout the Internet, it is often difficult to keep them coherent with the origin document without generating a new traffic that could increase the traffic on the international backbone and overload the popular servers. Several solutions have been proposed to solve this problem, among them two categories have been widely discussed: the strong document coherency and the weak document coherency. The cost and the efficiency of the two categories are still a controversial issue, while in some studies the strong coherency is far too expensive to be used in the Web context, in other studies it could be maintained at a low cost. The accuracy of these analysis is depending very much on how the document updating process is approximated. In this study, we compare some of the coherence methods proposed for Web caching. Among other points, we study the side effects of these methods on the Internet traffic. The ultimate goal is to study the cache behavior under several conditions, which will cover some of the factors that play an important role in the Web cache performance evaluation and quantify their impact on the simulation accuracy. The results presented in this study show indeed some differences in the outcome of the simulation of a Web cache depending on the workload being used, and the probability distribution used to approximate updates on the cached documents. Each experiment shows two case studies that outline the impact of the considered parameter on the performance of the cache.

  8. A Web-Based Decision Tool to Improve Contraceptive Counseling for Women With Chronic Medical Conditions: Protocol For a Mixed Methods Implementation Study

    Science.gov (United States)

    Damschroder, Laura J; Fetters, Michael D; Zikmund-Fisher, Brian J; Crabtree, Benjamin F; Hudson, Shawna V; Ruffin IV, Mack T; Fucinari, Juliana; Kang, Minji; Taichman, L Susan; Creswell, John W

    2018-01-01

    Background Women with chronic medical conditions, such as diabetes and hypertension, have a higher risk of pregnancy-related complications compared with women without medical conditions and should be offered contraception if desired. Although evidence based guidelines for contraceptive selection in the presence of medical conditions are available via the United States Medical Eligibility Criteria (US MEC), these guidelines are underutilized. Research also supports the use of decision tools to promote shared decision making between patients and providers during contraceptive counseling. Objective The overall goal of the MiHealth, MiChoice project is to design and implement a theory-driven, Web-based tool that incorporates the US MEC (provider-level intervention) within the vehicle of a contraceptive decision tool for women with chronic medical conditions (patient-level intervention) in community-based primary care settings (practice-level intervention). This will be a 3-phase study that includes a predesign phase, a design phase, and a testing phase in a randomized controlled trial. This study protocol describes phase 1 and aim 1, which is to determine patient-, provider-, and practice-level factors that are relevant to the design and implementation of the contraceptive decision tool. Methods This is a mixed methods implementation study. To customize the delivery of the US MEC in the decision tool, we selected high-priority constructs from the Consolidated Framework for Implementation Research and the Theoretical Domains Framework to drive data collection and analysis at the practice and provider level, respectively. A conceptual model that incorporates constructs from the transtheoretical model and the health beliefs model undergirds patient-level data collection and analysis and will inform customization of the decision tool for this population. We will recruit 6 community-based primary care practices and conduct quantitative surveys and semistructured qualitative

  9. A Web-Based Decision Tool to Improve Contraceptive Counseling for Women With Chronic Medical Conditions: Protocol For a Mixed Methods Implementation Study.

    Science.gov (United States)

    Wu, Justine P; Damschroder, Laura J; Fetters, Michael D; Zikmund-Fisher, Brian J; Crabtree, Benjamin F; Hudson, Shawna V; Ruffin, Mack T; Fucinari, Juliana; Kang, Minji; Taichman, L Susan; Creswell, John W

    2018-04-18

    Women with chronic medical conditions, such as diabetes and hypertension, have a higher risk of pregnancy-related complications compared with women without medical conditions and should be offered contraception if desired. Although evidence based guidelines for contraceptive selection in the presence of medical conditions are available via the United States Medical Eligibility Criteria (US MEC), these guidelines are underutilized. Research also supports the use of decision tools to promote shared decision making between patients and providers during contraceptive counseling. The overall goal of the MiHealth, MiChoice project is to design and implement a theory-driven, Web-based tool that incorporates the US MEC (provider-level intervention) within the vehicle of a contraceptive decision tool for women with chronic medical conditions (patient-level intervention) in community-based primary care settings (practice-level intervention). This will be a 3-phase study that includes a predesign phase, a design phase, and a testing phase in a randomized controlled trial. This study protocol describes phase 1 and aim 1, which is to determine patient-, provider-, and practice-level factors that are relevant to the design and implementation of the contraceptive decision tool. This is a mixed methods implementation study. To customize the delivery of the US MEC in the decision tool, we selected high-priority constructs from the Consolidated Framework for Implementation Research and the Theoretical Domains Framework to drive data collection and analysis at the practice and provider level, respectively. A conceptual model that incorporates constructs from the transtheoretical model and the health beliefs model undergirds patient-level data collection and analysis and will inform customization of the decision tool for this population. We will recruit 6 community-based primary care practices and conduct quantitative surveys and semistructured qualitative interviews with women who

  10. A development process meta-model for Web based expert systems: The Web engineering point of view

    DEFF Research Database (Denmark)

    Dokas, I.M.; Alapetite, Alexandre

    2006-01-01

    raised their complexity. Unfortunately, there is so far no clear answer to the question: How may the methods and experience of Web engineering and expert systems be combined and applied in order todevelop effective and successful Web based expert systems? In an attempt to answer this question...... on Web based expert systems – will be presented. The idea behind the presentation of theaccessibility evaluation and its conclusions is to show to Web based expert system developers, who typically have little Web engineering background, that Web engineering issues must be considered when developing Web......Similar to many legacy computer systems, expert systems can be accessed via the Web, forming a set of Web applications known as Web based expert systems. The tough Web competition, the way people and organizations rely on Web applications and theincreasing user requirements for better services have...

  11. Development of Auto-Seeding System Using Image Processing Technology in the Sapphire Crystal Growth Process via the Kyropoulos Method

    Directory of Open Access Journals (Sweden)

    Churl Min Kim

    2017-04-01

    Full Text Available The Kyropoulos (Ky and Czochralski (Cz methods of crystal growth are used for large-diameter single crystals. The seeding process in these methods must induce initial crystallization by initiating contact between the seed crystals and the surface of the melted material. In the Ky and Cz methods, the seeding process lays the foundation for ingot growth during the entire growth process. When any defect occurs in this process, it is likely to spread to the entire ingot. In this paper, a vision system was constructed for auto seeding and for observing the surface of the melt in the Ky method. An algorithm was developed to detect the time when the internal convection of the melt is stabilized by observing the shape of the spoke pattern on the melt material surface. Then, the vision system and algorithm were applied to the growth furnace, and the possibility of process automation was examined for sapphire growth. To confirm that the convection of the melt was stabilized, the position of the island (i.e., the center of a spoke pattern was detected using the vision system and image processing. When the observed coordinates for the center of the island were compared with the coordinates detected from the image processing algorithm, there was an average error of 1.87 mm (based on an image with 1024 × 768 pixels.

  12. ANALYSIS OF GROWTH OF LALAWAK Barbonymus balleroides (VALENCIENNES, 1842 IN THREE CULTURE METHODS

    Directory of Open Access Journals (Sweden)

    Deni Radona

    2017-09-01

    Full Text Available In fish culture, optimal growth could be influenced by various culture methods. Aim of the study was to evaluate the productivity of Barbonymus balleroides, lalawak in floating net cages, concrete ponds, and earthen ponds. Cultivation was designed with the circulation water system. Experiment was conducted using completely randomized design with three treatments and three replications for each treatment. The experimental fish, sized of 4.20 ± 0.64 cm SL and weight of 2.14 ± 0.99 g, were obtained from induced breeding. The stocking density used was 20 individuals/m3. Fish were fed 3% of total weight two times every day using commercial pellet with 35% protein content for 90 day. The result showed that lalawak reared in earthen pond was no significant difference on length, weight, and biomass compared with that one in concrete pond (P>0.05, but significantly different (P0.05 among the three different culture systems for survival rate and FCR. Lalawak reared on earthen pond system supported with optimal water quality could increase productivity value.

  13. Synthesis and growth mechanism of sponge-like nickel using a hydrothermal method

    Science.gov (United States)

    Shao, Bin; Yin, Xueguo; Hua, Weidong; Ma, Yilong; Sun, Jianchun; Li, Chunhong; Chen, Dengming; Guo, Donglin; Li, Kejian

    2018-05-01

    Sponge-like nickel composed of micro-chains with a diameter of 1-5 μm was selectively synthesized by the hydrothermal method, using sodium hydroxide (NaOH) as the alkaline reagent, aqueous hydrazine as reducing agent and citric acid as a coordination agent. The time-dependent samples prepared at different NaOH concentrations were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FTIR). The results showed that the agglomerates of nickel citrate hydrazine complex nanoplates were first precipitated and then reduced to prickly nickel micro-chains at a lower NaOH concentration, which played a role in the further formation of sponge-like nickel. Also, the probable growth mechanism of the sponge-like nickel was proposed. The magnetic properties of sponge-like nickel were studied using a vibrating sample magnetometer. The sponge-like nickel exhibited a ferromagnetic behavior with a saturation magnetization value of 43.8 emu g-1 and a coercivity value of 120.7 Oe.

  14. EFFECT OF SOWING DATE AND WEED CONTROL METHOD ON THE GROWTH AND YIELD OF SOYBEAN

    Directory of Open Access Journals (Sweden)

    Nasrin Akter

    2016-06-01

    Full Text Available Sowing date and weed management play a significant role in determining soybean growth, development and seed yield. Results showed that different sowing date and weed control methods had significant effect on relative weed density, weed biomass, weed control efficiency, plant height, dry weight plant-1 and seed yield of soybean. Among the infested weed species in the experimental field the dominant weeds were Lindernia procumbens (44.78%, Echinochloa colonum (26.39% and Cynodon dactylon (16.30%. The results also revealed that early sowing (2 January brought about the highest seed yield (2.17 t ha-1 and sowing delay (1 February resulted in the lowest yield (1.64 t ha-1. Two times hand weeding (20 and 40 DAS controlled the weeds most effectively and led to highest seed yield (2.23 t ha-1 which was statistically similar (2.19 t ha-1 with herbicide application. Combination effect showed that the highest seed yield (2.50 t ha-1 was obtained from 2 January sowing when the crop was weeded by hand at 20 and 40 DAS.

  15. Numerical simulation of bubble growth and departure during flow boiling period by lattice Boltzmann method

    International Nuclear Information System (INIS)

    Sun, Tao; Li, Weizhong; Yang, Shuai

    2013-01-01

    Highlights: • The bubble departure diameter is proportional to g −0.425 in quiescent fluid. • The bubble release frequency is proportional to g 0.678 in quiescent fluid. • The simulation result supports the transient micro-convection model. • The bubble departure diameter has exponential relation with inlet velocity. • The bubble release frequency has linear relation with inlet velocity. -- Abstract: Nucleate boiling flows on a horizontal plate are studied in this paper by a hybrid lattice Boltzmann method, where both quiescent and slowly flowing ambient are concerned. The process of a single bubble growth on and departure from the superheated wall is simulated. The simulation result supports the transient micro-convection model. The bubble departure diameter and the release frequency are investigated from the simulation result. It is found that the bubble departure diameter and the release frequency are proportional to g −0.425 and g 0.678 in quiescent fluid, respectively, where g is the gravitational acceleration. Nucleate boiling in slowly flowing ambient is also calculated in consideration of forced convection. It is presented that the bubble departure diameter and the release frequency have exponential relationship and linear relationship with inlet velocity in slowly flowing fluid, respectively

  16. How the “Understanding Research Evidence” Web-Based Video Series From the National Collaborating Centre for Methods and Tools Contributes to Public Health Capacity to Practice Evidence-Informed Decision Making: Mixed-Methods Evaluation

    Science.gov (United States)

    Chan, Linda; Mackintosh, Jeannie

    2017-01-01

    Background The National Collaborating Centre for Methods and Tools (NCCMT) offers workshops and webinars to build public health capacity for evidence-informed decision-making. Despite positive feedback for NCCMT workshops and resources, NCCMT users found key terms used in research papers difficult to understand. The Understanding Research Evidence (URE) videos use plain language, cartoon visuals, and public health examples to explain complex research concepts. The videos are posted on the NCCMT website and YouTube channel. Objective The first four videos in the URE web-based video series, which explained odds ratios (ORs), confidence intervals (CIs), clinical significance, and forest plots, were evaluated. The evaluation examined how the videos affected public health professionals’ practice. A mixed-methods approach was used to examine the delivery mode and the content of the videos. Specifically, the evaluation explored (1) whether the videos were effective at increasing knowledge on the four video topics, (2) whether public health professionals were satisfied with the videos, and (3) how public health professionals applied the knowledge gained from the videos in their work. Methods A three-part evaluation was conducted to determine the effectiveness of the first four URE videos. The evaluation included a Web-based survey, telephone interviews, and pretest and posttests, which evaluated public health professionals’ experience with the videos and how the videos affected their public health work. Participants were invited to participate in this evaluation through various open access, public health email lists, through informational flyers and posters at the Canadian Public Health Association (CPHA) conference, and through targeted recruitment to NCCMT’s network. Results In the Web-based surveys (n=46), participants achieved higher scores on the knowledge assessment questions from watching the OR (P=.04), CI (P=.04), and clinical significance (P=.05) videos but

  17. Determination of the slow crack growth susceptibility coefficient of dental ceramics using different methods.

    Science.gov (United States)

    Gonzaga, Carla Castiglia; Cesar, Paulo Francisco; Miranda, Walter Gomes; Yoshimura, Humberto Naoyuki

    2011-11-01

    This study compared three methods for the determination of the slow crack growth susceptibility coefficient (n) of two veneering ceramics (VM7 and d.Sign), two glass-ceramics (Empress and Empress 2) and a glass-infiltrated alumina composite (In-Ceram Alumina). Discs (n = 10) were prepared according to manufacturers' recommendations and polished. The constant stress-rate test was performed at five constant stress rates to calculate n(d) . For the indentation fracture test to determine n(IF) , Vickers indentations were performed and the crack lengths were measured under an optical microscope. For the constant stress test (performed only for d.Sign for the determination of n(s) ) four constant stresses were applied and held constant until the specimens' fracture and the time to failure was recorded. All tests were performed in artificial saliva at 37°C. The n(d) values were 17.2 for Empress 2, followed by d.Sign (20.5), VM7 (26.5), Empress (30.2), and In-Ceram Alumina (31.1). In-Ceram Alumina and Empress 2 showed the highest n(IF) values, 66.0 and 40.2, respectively. The n(IF) values determined for Empress (25.2), d.Sign (25.6), and VM7 (20.1) were similar. The n(s) value determined for d.Sign was 31.4. It can be concluded that the n values determined for the dental ceramics evaluated were significantly influenced by the test method used. 2011 Wiley Periodicals, Inc.

  18. The Effect of Plant Cultivar, Growth Media, Harvest Method and Post Harvest Treatment on the Microbiology of Edible Crops

    Science.gov (United States)

    Hummerick, Mary P.; Gates, Justin R.; Nguyen, Bao-Thang; Massa, Gioia D.; Wheeler, Raymond M.

    2011-01-01

    Systems for the growth of crops in closed environments are being developed and tested for potential use in space applications to provide a source of fresh food. Plant growth conditions, growth media composition and harvest methods can have an effect on the microbial population of the plant, and therefore should be considered along with the optimization of plant growth and harvest yields to ensure a safe and palatable food crop. This work examines the effect of plant cultivar, growth media, and harvest method on plant microbial populations. Twelve varieties of leafy greens and herbs were grown on a mixture of Fafard #2 and Arcillite in the pillow root containment system currently being considered for the VEGGIE plant growth unit developed by Orbitec. In addition, ,Sierra and Outredgeous lettuce varieties were grown in three different mixtures (Fafard #2, Ardllite, and Perlite/Vermiculite). The plants were analyzed for microbial density. Two harvest methods, "cut and come again" (CACA) and terminal harvest were also compared. In one set ofexpe'riments red leaf lettuce and mizuna were grown in pots in a Biomass Production System for education. Plants were harvested every two weeks by either method. Another set of experiments was performed using the rooting pillows to grow 5 varieties of leafy greens and cut harvesting at different intervals. Radishes were harvested and replanted at two-week intervals. Results indicate up to a 3 IOglO difference in microbial counts between some varieties of plants. Rooting medium resulted in an approximately 2 IOglO lower count in the lettuce grown in arscillite then those grown in the other mixtures. Harvest method and frequency had less impact on microbial counts only showing a significant increase in one variety of plant. Post harvest methods to decrease the bacterial counts on edible crops were investigated in these and other experiments. The effectiveness of PRO-SAN and UV-C radiation is compared.

  19. Web-ADARE: A Web-Aided Data Repairing System

    KAUST Repository

    Gu, Binbin

    2017-03-08

    Data repairing aims at discovering and correcting erroneous data in databases. In this paper, we develop Web-ADARE, an end-to-end web-aided data repairing system, to provide a feasible way to involve the vast data sources on the Web in data repairing. Our main attention in developing Web-ADARE is paid on the interaction problem between web-aided repairing and rule-based repairing, in order to minimize the Web consultation cost while reaching predefined quality requirements. The same interaction problem also exists in crowd-based methods but this is not yet formally defined and addressed. We first prove in theory that the optimal interaction scheme is not feasible to be achieved, and then propose an algorithm to identify a scheme for efficient interaction by investigating the inconsistencies and the dependencies between values in the repairing process. Extensive experiments on three data collections demonstrate the high repairing precision and recall of Web-ADARE, and the efficiency of the generated interaction scheme over several baseline ones.

  20. Web-ADARE: A Web-Aided Data Repairing System

    KAUST Repository

    Gu, Binbin; Li, Zhixu; Yang, Qiang; Xie, Qing; Liu, An; Liu, Guanfeng; Zheng, Kai; Zhang, Xiangliang

    2017-01-01

    Data repairing aims at discovering and correcting erroneous data in databases. In this paper, we develop Web-ADARE, an end-to-end web-aided data repairing system, to provide a feasible way to involve the vast data sources on the Web in data repairing. Our main attention in developing Web-ADARE is paid on the interaction problem between web-aided repairing and rule-based repairing, in order to minimize the Web consultation cost while reaching predefined quality requirements. The same interaction problem also exists in crowd-based methods but this is not yet formally defined and addressed. We first prove in theory that the optimal interaction scheme is not feasible to be achieved, and then propose an algorithm to identify a scheme for efficient interaction by investigating the inconsistencies and the dependencies between values in the repairing process. Extensive experiments on three data collections demonstrate the high repairing precision and recall of Web-ADARE, and the efficiency of the generated interaction scheme over several baseline ones.

  1. Effect of solution volume covariation on the growth mechanism of Au nanorods using the seed-mediated method

    International Nuclear Information System (INIS)

    Ma, Xiao; Wang, Moo-Chin; Feng, Jinyang; Zhao, Xiujian

    2015-01-01

    The effect of solution volume covariation on the growth mechanism of Au nanorods synthesized using a seed-mediated method was studied. The results from the ultraviolet–visible absorption spectra of gold nanorods (GNRs) revealed that the transverse surface plasmon resonance was ∼550 nm for all GNR samples synthesized in various total volumes of growth solutions. The wavelength of longitudinal surface plasmon resonance of GNRs increased from 757 to 915 nm, with the total volume of growth solution being raised from 10 to 320 ml. Moreover, the calculated aspect ratio (AR) also increased from 3.55 to 5.21 while the total volume of growth solution increased from 10 to 320 ml. Transmission electron microscopy microstructures showed that the growth mechanism of GNRs along 〈1 0 0〉 is in accordance with the hypothesis that the ratio of the number of monodispersed Au atoms existing in the growth solution to the number of seeds explain the behavior of Au atoms deposited on the nanorods with respect to all of the constituent concentrations in the growth solution on the AR of GNRs

  2. Weed-crop competition effects on growth and yield of sugarcane planted using two methods

    International Nuclear Information System (INIS)

    Zafar, M.; Tanveer, A.; Cheema, Z.A.; Ashraf, M.

    2010-01-01

    Effect of planting techniques and weed-crop competition periods on yield potential of spring planted sugarcane variety HSF-240 was studied at the Ayub Agricultural Research Institute, Faisalabad, Pakistan. The experiment was laid out in RCBD with a split-plot arrangement, with four replications and net plot size of 3.6m x 10m. In the experiment, two planting techniques viz., 60 cm apart rows in flat sowing technique and 120 cm apart rows in trench sowing technique were randomized in main plots. Seven weed-crop competition periods viz., Zero (weed free), weed-crop competition for 45, 60, 75, 90, 105 days after sowing (DAS) and weedy check (full season weed-crop competition) were randomized in sub-plots. Sugarcane sown by trench method exhibited more leaf area index (LAI), average crop growth rate (ACGR) and yield contributing attributes. Trench sowing by yielding 72.22 and 75.08 t ha/sup -1/ stripped cane yields, significantly showed superiority over the flat sowing, which gave 64.13 and 66.04 t ha/sup -1/ stripped cane yields in 2005-06 and 2006- 07, respectively. Generally, there was an increase in weed population and biomass but decrease in leaf area index, crop growth rate and yield components with an increase in weed-crop competition period. A decrease of 10.06, 17.90, 22.42, 28.65, 37.64 and 56.89% in stripped cane yield was observed for weed-crop competition periods of 45, 60, 75, 90, 105 DAS and weedy check as compared with zero competition in 2005-06, respectively. In 2006-07, the respective decrease in stripped cane yield was 9.84, 18.76, 22.92, 27.98, 38.75, and 54.98%. Trench sowing at 1.2 m row spacing proved better sowing technique and 45 DAS was the critical period of weed-crop competition. (author)

  3. Web TA Production (WebTA)

    Data.gov (United States)

    US Agency for International Development — WebTA is a web-based time and attendance system that supports USAID payroll administration functions, and is designed to capture hours worked, leave used and...

  4. Multidimensional structured data visualization method and apparatus, text visualization method and apparatus, method and apparatus for visualizing and graphically navigating the world wide web, method and apparatus for visualizing hierarchies

    Science.gov (United States)

    Risch, John S [Kennewick, WA; Dowson, Scott T [West Richland, WA; Hart, Michelle L [Richland, WA; Hatley, Wes L [Kennewick, WA

    2008-05-13

    A method of displaying correlations among information objects comprises receiving a query against a database; obtaining a query result set; and generating a visualization representing the components of the result set, the visualization including one of a plane and line to represent a data field, nodes representing data values, and links showing correlations among fields and values. Other visualization methods and apparatus are disclosed.

  5. The status of silicon ribbon growth technology for high-efficiency silicon solar cells

    Science.gov (United States)

    Ciszek, T. F.

    1985-01-01

    More than a dozen methods have been applied to the growth of silicon ribbons, beginning as early as 1963. The ribbon geometry has been particularly intriguing for photovoltaic applications, because it might provide large area, damage free, nearly continuous substrates without the material loss or cost of ingot wafering. In general, the efficiency of silicon ribbon solar cells has been lower than that of ingot cells. The status of some ribbon growth techniques that have achieved laboratory efficiencies greater than 13.5% are reviewed, i.e., edge-defined, film-fed growth (EFG), edge-supported pulling (ESP), ribbon against a drop (RAD), and dendritic web growth (web).

  6. Development of test method for evaluating root resistance of pavement used for roof garden caused by thickening growth of root

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, Saori; Tanaka, Kyoji [Tokyo Institute of Technology, Tokyo, (Japan)

    2010-07-01

    The growth of roots of plants can damage roof garden components, such as pavements. This paper developed a test method for evaluating the resistance of pavement used in roof gardens to damage from a thickening growth of roots. The study assessed the behaviour of plant roots and evaluated the force of root growth subjected to hypertrophy. A system to measure the enlargement force of roots was designed and used for measurements over a period of 8 months on a cherry blossom of 21 years growth. The enlargement force was approximately 440 N/cm. A mechanical simulated root was designed and used to carry out experimental tests on asphalt pavements. The tests results demonstrated the viability of simulated root for evaluation of root resistances in pavements and various components of roof gardens.

  7. Web server attack analyzer

    OpenAIRE

    Mižišin, Michal

    2013-01-01

    Web server attack analyzer - Abstract The goal of this work was to create prototype of analyzer of injection flaws attacks on web server. Proposed solution combines capabilities of web application firewall and web server log analyzer. Analysis is based on configurable signatures defined by regular expressions. This paper begins with summary of web attacks, followed by detection techniques analysis on web servers, description and justification of selected implementation. In the end are charact...

  8. Semantic web for dummies

    CERN Document Server

    Pollock, Jeffrey T

    2009-01-01

    Semantic Web technology is already changing how we interact with data on the Web. By connecting random information on the Internet in new ways, Web 3.0, as it is sometimes called, represents an exciting online evolution. Whether you're a consumer doing research online, a business owner who wants to offer your customers the most useful Web site, or an IT manager eager to understand Semantic Web solutions, Semantic Web For Dummies is the place to start! It will help you:Know how the typical Internet user will recognize the effects of the Semantic WebExplore all the benefits the data Web offers t

  9. Delivering Electronic Resources with Web OPACs and Other Web-based Tools: Needs of Reference Librarians.

    Science.gov (United States)

    Bordeianu, Sever; Carter, Christina E.; Dennis, Nancy K.

    2000-01-01

    Describes Web-based online public access catalogs (Web OPACs) and other Web-based tools as gateway methods for providing access to library collections. Addresses solutions for overcoming barriers to information, such as through the implementation of proxy servers and other authentication tools for remote users. (Contains 18 references.)…

  10. Statistical prediction of AVB wear growth and initiation in model F steam generator tubes using Monte Carlo method

    International Nuclear Information System (INIS)

    Lee, Jae Bong; Park, Jae Hak; Kim, Hong Deok; Chung, Han Sub; Kim, Tae Ryong

    2005-01-01

    The growth of AVB wear in Model F steam generator tubes is predicted using the Monte Carlo Method and statistical approaches. The statistical parameters that represent the characteristics of wear growth and wear initiation are derived from In-Service Inspection (ISI) Non-Destructive Evaluation (NDE) data. Based on the statistical approaches, wear growth model are proposed and applied to predict wear distribution at the End Of Cycle (EOC). Probabilistic distributions of the number of wear flaws and maximum wear depth at EOC are obtained from the analysis. Comparing the predicted EOC wear flaw data with the known EOC data the usefulness of the proposed method is examined and satisfactory results are obtained

  11. Statistical prediction of AVB wear growth and initiation in model F steam generator tubes using Monte Carlo method

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Bong; Park, Jae Hak [Chungbuk National Univ., Cheongju (Korea, Republic of); Kim, Hong Deok; Chung, Han Sub; Kim, Tae Ryong [Korea Electtric Power Research Institute, Daejeon (Korea, Republic of)

    2005-07-01

    The growth of AVB wear in Model F steam generator tubes is predicted using the Monte Carlo Method and statistical approaches. The statistical parameters that represent the characteristics of wear growth and wear initiation are derived from In-Service Inspection (ISI) Non-Destructive Evaluation (NDE) data. Based on the statistical approaches, wear growth model are proposed and applied to predict wear distribution at the End Of Cycle (EOC). Probabilistic distributions of the number of wear flaws and maximum wear depth at EOC are obtained from the analysis. Comparing the predicted EOC wear flaw data with the known EOC data the usefulness of the proposed method is examined and satisfactory results are obtained.

  12. Moving toward a universally accessible web: Web accessibility and education.

    Science.gov (United States)

    Kurt, Serhat

    2017-12-08

    The World Wide Web is an extremely powerful source of information, inspiration, ideas, and opportunities. As such, it has become an integral part of daily life for a great majority of people. Yet, for a significant number of others, the internet offers only limited value due to the existence of barriers which make accessing the Web difficult, if not impossible. This article illustrates some of the reasons that achieving equality of access to the online world of education is so critical, explores the current status of Web accessibility, discusses evaluative tools and methods that can help identify accessibility issues in educational websites, and provides practical recommendations and guidelines for resolving some of the obstacles that currently hinder the achievability of the goal of universal Web access.

  13. [Growth of codoped CdWO4 crystals by Bridgman method and their optical spectra].

    Science.gov (United States)

    Yu, Can; Xia, Hai-Ping; Wang, Dong-Jie; Chen, Hong-Bing

    2011-09-01

    The CdWO4 crystals with good quality in the size of Phi25 mm x 120 mm, doped with Co in 0.5% molar fraction in the raw composition, were grown by the Bridgman method by taking -70 degrees C x cm(-1) of solid-liquid interface and -0.50 mm x h(-1) growth rate. The crystal presents transparence and deep blue. The X-ray diffraction (XRD) was used to characterize the crystals. Three absorption peaks at 518, 564 and 655 nm respectively, which are attributed to the overlapping of 4 T1 (4F) --> 4A2 (4F) and 4 T1 (4F) --> 4 T1 (4P) of Co2+ octahedrons, and a wide band centered at 1 863 nm, which is attributed to 4Ti (4F) --> 4 T2 (4F), was observed. The absorption results indicated that the Co ions presented +2 valence in crystal and located within the distorted oxygen octahedrons. The crystal-field parameter D(q) and the Racah parameter B were estimated to be 990 and 726.3 cm(-1) respectively based on the absorption spectra. A fluorescence emission at 778 nm (4T1 (4P) --> 4 T1 (4F)) for codoped CdWO4 crystals was observed under excitation by 520 nm light. It can be deduced from the changes in absorption and emission intensity of different parts of crystal that the concentration of Co2+ ion in crystal increased along growing direction and the effective distribution coefficient of Co2+ ion in CdWO4 crystal is less than 1.

  14. Beyond Trust: Web Site Design Preferences Across Cultures

    OpenAIRE

    Dianne Cyr; Carole Bonanni; John Bowes; Joe Ilsever

    2005-01-01

    The growth of Internet shopping motivates a better understanding of how e-loyalty is built online between businesses and consumers. In this study, Web site design and culture are advanced as important to Web site trust, Web site satisfaction, and e-loyalty in online business relationships. Based on data collected in Canada, the U.S., Germany, and Japan, the research considers (1) examining within culture preferences for design elements of a local vs. a foreign Web site and subsequent particip...

  15. Gold nanoparticle growth control - Implementing novel wet chemistry method on silicon substrate

    KAUST Repository

    Al-Ameer, Ammar; Katsiev, Habib; Sinatra, Lutfan; Hussein, Irshad; Bakr, Osman

    2013-01-01

    Controlling particle size, shape, nucleation, and self-assembly on surfaces are some of the main challenges facing electronic device fabrication. In this work, growth of gold nanoparticles over a wide range of sizes was investigated by using a novel

  16. Test Method Variability in Slow Crack Growth Properties of Sealing Glasses

    Science.gov (United States)

    Salem, J. A.; Tandon, R.

    2010-01-01

    The crack growth properties of several sealing glasses were measured by using constant stress rate testing in 2 and 95 percent RH (relative humidity). Crack growth parameters measured in high humidity are systematically smaller (n and B) than those measured in low humidity, and crack velocities for dry environments are 100x lower than for wet environments. The crack velocity is very sensitive to small changes in RH at low RH. Biaxial and uniaxial stress states produced similar parameters. Confidence intervals on crack growth parameters that were estimated from propagation of errors solutions were comparable to those from Monte Carlo simulation. Use of scratch-like and indentation flaws produced similar crack growth parameters when residual stresses were considered.

  17. Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X

    Directory of Open Access Journals (Sweden)

    R. Citarella

    2013-10-01

    Full Text Available The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five so-called lateral support elements (LSEs per half module. After welding of the LSE hollow boxes to the coil cases, cracks were found in the vicinity of the welds that could potentially limit the allowed number N of electromagnetic (EM load cycles of the machine. In response to the appearance of first cracks during assembly, the Stress Intensity Factors (SIFs were calculated and corresponding crack growth rates of theoretical semi-circular cracks of measured sizes in potentially critical position and orientation were predicted using Paris’ law, whose parameters were calibrated in fatigue tests at cryogenic temperature. In this paper the Dual Boundary Element Method (DBEM is applied in a coupled FEM-DBEM approach to analyze the propagation of multiple cracks with different shapes. For this purpose, the crack path is assessed with the Minimum Strain Energy density criterion and SIFs are calculated by the J-integral approach. The Finite Element Method (FEM is adopted to model, using the commercial codes Ansys or Abaqus;, the overall component whereas the submodel analysis, in the volume surrounding the cracked area, is performed by FEM (“FEM-FEM approach” or alternatively by DBEM (“FEM-DBEM approach”. The “FEM-FEM approach” considers a FEM submodel, that is extracted from the FEM global model; the latter provide the boundary conditions for the submodel. Such approach is affected by some restrictions in the crack propagation phase, whereas, with the “FEM-DBEM approach”, the crack propagation simulation is straightforward. In this case the submodel is created in a DBEM environment with boundary conditions provided by the global FEM analysis; then the crack is introduced and a crack propagation analysis

  18. A non-destructive selection method for faster growth at suboptimal temperature in common bean (Phaseolus vulgaris)

    NARCIS (Netherlands)

    Drijfhout, E.; Oeveren, J.C. van; Jansen, R.C.

    1991-01-01

    A non-destructive method has been developed to select common bean (Phaseolus vulgaris L.) plants whose growth is less effected at a suboptimal temperature. Shoot weight was determined at a suboptimal (14°C) and optimal temperature (20°C), 38 days after sowing and accessions identified with a

  19. Does economic growth erode social capital and subjective well-being? Old question, new method

    OpenAIRE

    Mikucka, Malgorzata; Sarracino, Francesco; 3rd International Annual Conference of the LCSR: “Cultural and Economic changes under cross-national perspective”

    2013-01-01

    The work of Easterlin questioned the relationship between economic growth and life satisfaction. Subsequent research on “Easterlin paradox” provided conflicting evidence, which suggests that the paradox holds in some conditions but not in others. However, these conditions were only rarely investigated by the literature, in part because the debate has been limited by use of country-level aggregated data. Our paper fills this gap by investigating the relationship between economic growth and lif...

  20. How do economic growth and social capital shape subjective well-being? Old question, new method

    OpenAIRE

    Mikucka, Malgorzata; Sarracino, Francesco; The 4th LCSR International Workshop “Social and Cultural Changes in Cross-National Perspective: Values and Modernization”

    2014-01-01

    The work of Easterlin questioned the relationship between economic growth and life satisfaction. Subsequent research on “Easterlin paradox” provided conflicting evidence, which suggests that the paradox holds in some conditions but not in others. However, these conditions were only rarely investigated by the literature, in part because the debate has been limited by use of country-level aggregated data. Our paper fills this gap by investigating the relationship between economic growth and lif...

  1. Fatigue crack growth studies on a tee junction using ultrasonic non-destructive methods

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Ramesh, A.S.; Jayakumar, T.; Kalyanasundaram, P.; Baldev Raj

    1996-01-01

    Fatigue cracks need to be detected and sized to maintain structural integrity. The significance of cracks detected in service must also be assessed. This paper describes the on-line ultrasonic testing carried out on a Tee joint subjected to fatigue loading. The initiation and growth of the cracks were monitored for every 5,000 cycles up to 40,000 cycles. The study demonstrated the use of ultrasonic testing for fatigue crack growth detection and sizing. (author)

  2. Improvement of elastic-plastic fatigue crack growth evaluation method. 2. Crack opening behavior

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Yukio [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    2001-05-01

    Evaluation of crack growth behavior under cyclic loading is often required in the structural integrity assessment of cracked components. Closing and re-opening of the crack give large influence on crack growth rate through the change of fracture mechanics parameters. Based on the finite element analysis for a center-cracked plate, dependency of crack opening ratio on applied stress range and mean stress was examined. Simple formulae for representing the results were derived for plane stress and plane strain conditions. (author)

  3. Gracob: a novel graph-based constant-column biclustering method for mining growth phenotype data

    KAUST Repository

    Alzahrani, Majed A.; Kuwahara, Hiroyuki; Wang, Wei; Gao, Xin

    2017-01-01

    Growth phenotype profiling of genome-wide genedeletion strains over stress conditions can offer a clear picture that the essentiality of genes depends on environmental conditions. Systematically identifying groups of genes from such high-throughput data that share similar patterns of conditional essentiality and dispensability under various environmental conditions can elucidate how genetic interactions of the growth phenotype are regulated in response to the environment.We first demonstrate that detecting such\\co-fit

  4. Gracob: a novel graph-based constant-column biclustering method for mining growth phenotype data

    KAUST Repository

    Alzahrani, Majed A.

    2017-04-05

    Growth phenotype profiling of genome-wide genedeletion strains over stress conditions can offer a clear picture that the essentiality of genes depends on environmental conditions. Systematically identifying groups of genes from such high-throughput data that share similar patterns of conditional essentiality and dispensability under various environmental conditions can elucidate how genetic interactions of the growth phenotype are regulated in response to the environment.We first demonstrate that detecting such\\\\co-fit

  5. Method to evaluate steering and alignment algorithms for controlling emittance growth

    International Nuclear Information System (INIS)

    Adolphsen, C.; Raubenheimer, T.

    1993-04-01

    Future linear colliders will likely use sophisticated beam-based alignment and/or steering algorithms to control the growth of the beam emittance in the linac. In this paper, a mathematical framework is presented which simplifies the evaluation of the effectiveness of these algorithms. As an application, a quad alignment that uses beam data taken with the nominal linac optics, and with a scaled optics, is evaluated in terms of the dispersive emittance growth remaining after alignment

  6. A generalized diffusion model for growth of nanoparticles synthesized by colloidal methods.

    Science.gov (United States)

    Wen, Tianlong; Brush, Lucien N; Krishnan, Kannan M

    2014-04-01

    A nanoparticle growth model is developed to predict and guide the syntheses of monodisperse colloidal nanoparticles in the liquid phase. The model, without any a priori assumptions, is based on the Fick's law of diffusion, conservation of mass and the Gibbs-Thomson equation for crystal growth. In the limiting case, this model reduces to the same expression as the currently accepted model that requires the assumption of a diffusion layer around each nanoparticle. The present growth model bridges the two limiting cases of the previous model i.e. complete diffusion controlled and adsorption controlled growth of nanoparticles. Specifically, the results show that a monodispersion of nanoparticles can be obtained both with fast monomer diffusion and with surface reaction under conditions of small diffusivity to surface reaction constant ratio that results is growth 'focusing'. This comprehensive description of nanoparticle growth provides new insights and establishes the required conditions for fabricating monodisperse nanoparticles critical for a wide range of applications. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Manure placement method influenced growth, phenology and bunch yield of three Musagenotypes in a humid zone of Southern Nigeria

    OpenAIRE

    A. Tenkouano; O. O. Ndukwe; K. P. Baiyeri

    2013-01-01

    Manure placement methods earlier evaluated in a greenhouse using the banana cultivar PITA 14 as a test-crop significantly influenced root system development, vegetative growth, nutrient uptake, whole plant dry matter yield and distribution of the crop. These placement methods plus an additional treatment were re-evaluated in a field experiment over two cropping cycles using three Musa genotypes. The treatments were: a full dose of poultry manure placed on the soil surface – top dressing(T1),a...

  8. Determination of the growth restriction factor and grain size for aluminum alloys by a quasi-binary equivalent method

    International Nuclear Information System (INIS)

    Mitrašinović, A.M.; Robles Hernández, F.C.

    2012-01-01

    Highlights: ► A new method to determine the growth restricting factor. (Q) is proposed ► The proposed method is highly accurate (R 2 = 0.99) and simple. ► A major novelty of this method is the determination of Q for non-dilute samples. ► The method proposed herein is based on quasi-binary phase diagrams and composition. ► This method can be easily implemented industrially or as a research tool. - Abstract: In the present research paper is suggested a new methodology to determine the growth restricting factor (Q) and grain size (GS) for various Al-alloys. The present method combines a thermodynamical component based on the liquidus behavior of each alloying element that is later incorporated into the well known growth restricting models for multi-component alloys. This approach that can be used to determine Q and/or GS based on the chemical composition and the slope of the liquidus temperature of any Al-alloy solidified in close to equilibrium conditions. This method can be modified further in order to assess the effect of cooling rate or thermomechanical processing on growth restricting factor and grain size. In the present paper is proposed a highly accurate (R 2 = 0.99) and validated model for Al–Si alloys, but it can be modified for any other Al–X alloying system. The present method can be used for alloys with relatively high solute content and due to the use of the thermodynamics of liquidus this system considers the poisoning effects of single and multi-component alloying elements.

  9. Effect of amaranth dye on the growth and properties of conventional and SR method grown KAP single crystals

    Science.gov (United States)

    Babu Rao, G.; P., Rajesh; Ramasamy, P.

    2018-04-01

    The 0.1 mol% amaranth added KAP single crystals were grown from aqueous solutions by both slow evaporation solution technique and Sankaranarayanan-Ramasamy method. The single crystal having dimension of 45 mm length and 12 mm diameter was grown with growth rate of 1.5 mm/day using SR method. 87 % transmittance is obtained for SR method grown amaranth added KAP single crystal. The high intense luminescence at 661 nm is obtained from amaranth added conventional and SR method grown KAP single crystal. The amaranth added KAP single crystal possesses good mechanical and laser damage threshold stability.

  10. Temperature Effect Study on Growth and Survival of Pathogenic Vibrio parahaemolyticus in Jinjiang Oyster (Crassostrea rivularis with Rapid Count Method

    Directory of Open Access Journals (Sweden)

    Yuan Wang

    2018-01-01

    Full Text Available The growth of Vibrio parahaemolyticus (V. parahaemolyticus in oysters during postharvest storage increases the possibility of its infection in humans. In this work, to investigate the growth or survival profiles in different media, pathogenic V. parahaemolyticus in APW, Jinjiang oyster (JO, Crassostrea rivularis slurry, and live JO were studied under different temperatures. All the strain populations were counted through our double-layer agar plate (DLAP method. In APW, the pathogenic V. parahaemolyticus showed continuous growth under 15, 25, and 35°C, while a decline in behavior was displayed under 5°C. The similar survival trend of pathogenic V. parahaemolyticus in JO slurry and live JO was observed under 5, 25, and 35°C, except the delayed growth or decline profile compared to APW. Under 15°C, they displayed decline and growth profile in JO slurry and live JO, respectively. These results indicate the different sensitivity of pathogenic V. parahaemolyticus in these matrices to temperature variation. Furthermore, nonpathogenic V. parahaemolyticus displayed little difference in survival profiles when inoculated in live JO under corresponding temperatures. The results indicate that inhibition or promotion effect could be regulated under different storage temperature for both pathogenic and nonpathogenic strains. Besides, the DLAP method showed the obvious quickness and efficiency during the bacteria count.

  11. Personalization of Rule-based Web Services.

    Science.gov (United States)

    Choi, Okkyung; Han, Sang Yong

    2008-04-04

    Nowadays Web users have clearly expressed their wishes to receive personalized services directly. Personalization is the way to tailor services directly to the immediate requirements of the user. However, the current Web Services System does not provide any features supporting this such as consideration of personalization of services and intelligent matchmaking. In this research a flexible, personalized Rule-based Web Services System to address these problems and to enable efficient search, discovery and construction across general Web documents and Semantic Web documents in a Web Services System is proposed. This system utilizes matchmaking among service requesters', service providers' and users' preferences using a Rule-based Search Method, and subsequently ranks search results. A prototype of efficient Web Services search and construction for the suggested system is developed based on the current work.

  12. Penilaian Risiko Aplikasi Web Menggunakan Model DREAD

    Directory of Open Access Journals (Sweden)

    Didit Suprihanto

    2016-01-01

    Full Text Available Application that  is developed by web based, beside has surplus in WWW technology, it has susceptibility side that can be threat too. Susceptibility generate risk and can bring out big trouble even effect big disadvantage. The goal of this research is design and build document risk assessment system of threat level and prevention advice. It use DREAD model as method to solve trouble by giving qualified information. This information are used to produce risk level in web application. The result of this research is web application risk assessment system by using DREAD model to know risk threat level and equate perception of web threat risk to application developer, minimize of threat risk and maximize performance of web application.   Keywords : DREAD model, web threat risk, web risk assessment system

  13. New Crystal-Growth Methods for Producing Lattice-Matched Substrates for High-Temperature Superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Boatner, L.A.

    2008-06-24

    This effort addressed the technical problem of identifying and growing, on a commercial scale, suitable single-crystal substrates for the subsequent deposition of epitaxial thin films of high temperature semiconductors such as GaN/AlN. The lack of suitable lattice-matched substrate materials was one of the major problem areas in the development of semiconducting devices for use at elevated temperatures as well as practical opto-electronic devices based on Al- and GaN technology. Such lattice-matched substrates are necessary in order to reduce or eliminate high concentrations of defects and dislocations in GaN/AlN and related epitaxial thin films. This effort concentrated, in particular, on the growth of single crystals of ZnO for substrate applications and it built on previous ORNL experience in the chemical vapor transport growth of large single crystals of zinc oxide. This combined expertise in the substrate growth area was further complemented by the ability of G. Eres and his collaborators to deposit thin films of GaN on the subject substrates and the overall ORNL capability for characterizing the quality of such films. The research effort consisted of research on the growth of two candidate substrate materials in conjunction with concurrent research on the growth and characterization of GaN films, i.e. the effort combined bulk crystal growth capabilities in the area of substrate production at both ORNL and the industrial partner, Commercial Crystal Growth Laboratories (CCL), Naples, Florida, with the novel thin-film deposition techniques previously developed in the ORNL SSD.

  14. An ant colony optimization based feature selection for web page classification.

    Science.gov (United States)

    Saraç, Esra; Özel, Selma Ayşe

    2014-01-01

    The increased popularity of the web has caused the inclusion of huge amount of information to the web, and as a result of this explosive information growth, automated web page classification systems are needed to improve search engines' performance. Web pages have a large number of features such as HTML/XML tags, URLs, hyperlinks, and text contents that should be considered during an automated classification process. The aim of this study is to reduce the number of features to be used to improve runtime and accuracy of the classification of web pages. In this study, we used an ant colony optimization (ACO) algorithm to select the best features, and then we applied the well-known C4.5, naive Bayes, and k nearest neighbor classifiers to assign class labels to web pages. We used the WebKB and Conference datasets in our experiments, and we showed that using the ACO for feature selection improves both accuracy and runtime performance of classification. We also showed that the proposed ACO based algorithm can select better features with respect to the well-known information gain and chi square feature selection methods.

  15. Unequal-thickness billet optimization in transitional region during isothermal local loading forming of Ti-alloy rib-web component using response surface method

    Directory of Open Access Journals (Sweden)

    Ke WEI

    2018-04-01

    Full Text Available Avoiding the folding defect and improving the die filling capability in the transitional region are desired in isothermal local loading forming of a large-scale Ti-alloy rib-web component (LTRC. To achieve a high-precision LTRC, the folding evolution and die filling process in the transitional region were investigated by 3D finite element simulation and experiment using an equal-thickness billet (ETB. It is found that the initial volume distribution in the second-loading region can greatly affect the amount of material transferred into the first-loading region during the second-loading step, and thus lead to the folding defect. Besides, an improper initial volume distribution results in non-concurrent die filling in the cavities of ribs after the second-loading step, and then causes die underfilling. To this end, an unequal-thickness billet (UTB was employed with the initial volume distribution optimized by the response surface method (RSM. For a certain eigenstructure, the critical value of the percentage of transferred material determined by the ETB was taken as a constraint condition for avoiding the folding defect in the UTB optimization process, and the die underfilling rate was considered as the optimization objective. Then, based on the RSM models of the percentage of transferred material and the die underfilling rate, non-folding parameter combinations and optimum die filling were achieved. Lastly, an optimized UTB was obtained and verified by the simulation and experiment. Keywords: Die filling, Folding defect, Isothermal local loading forming, Transitional region, Unequal-thickness billet optimization

  16. Web Services in Mobile Applications

    Directory of Open Access Journals (Sweden)

    Octavian DOSPINESCU

    2013-01-01

    Full Text Available Information and communication technologies are designed to support and anticipate the continuing changes of the information society, while outlining new economic, social and cultural dimensions. We see the growth of new business models whose aim is to remove traditional barriers and improve the value of goods and services. Information is a strategic resource and its manipulation raises new problems for all entities involved in the process. Information and communication technologies should be a stable support in managing the flow of data and support the integrity, confidentiality and availability. Concepts such as eBusiness, eCommerce, Software as a Service, Cloud Computing and Social Media are based on web technologies consisting of complex languages, protocols and standards, built around client-server architecture. One of the most used technologies in mobile applications are the Web Services defined as an application model supported by any operating system able to provide certain functionalities using Internet technologies to promote interoperability between various appli-cations and platforms. Web services use HTTP, XML, SSL, SMTP and SOAP, because their stability has proven over the years. Their functionalities are highly variable, with Web services applications exchange type, weather, arithmetic or authentication services. In this article we will talk about SOAP and REST architectures for web services in mobile applications and we will also provide some practical examples based on Android platform.

  17. Apparatus for growing a dendritic web

    International Nuclear Information System (INIS)

    Duncan, C.S.; Mchugh, J.P.; Piotrowski, P.A.; Skutch, M.E.

    1983-01-01

    A melt system including a susceptor-crucible assembly having improved gradient control when melt replenishment is used during dendritic web growth. The improvement lies in the formation of a thermal barrier in the base of the receptor which is in the form of a vertical slot in the region of the susceptor underlying the crucible at the location of a compartmental separator dividing the crucible into a growth compartment and a melt replenishment compartment. The result achieved is a step change in temperature gradient in the melt thereby providing a more uniform temperature in the growth compartment from which the dendritic web is drawn

  18. Het WEB leert begrijpen

    CERN Multimedia

    Stroeykens, Steven

    2004-01-01

    The WEB could be much more useful if the computers understood something of information on the Web pages. That explains the goal of the "semantic Web", a project in which takes part, amongst others, Tim Berners Lee, the inventor of the original WEB

  19. Instant responsive web design

    CERN Document Server

    Simmons, Cory

    2013-01-01

    A step-by-step tutorial approach which will teach the readers what responsive web design is and how it is used in designing a responsive web page.If you are a web-designer looking to expand your skill set by learning the quickly growing industry standard of responsive web design, this book is ideal for you. Knowledge of CSS is assumed.

  20. Feasibility, acceptability and effectiveness of an online alternative to face-to-face consultation in general practice: a mixed-methods study of webGP in six Devon practices.

    Science.gov (United States)

    Carter, Mary; Fletcher, Emily; Sansom, Anna; Warren, Fiona C; Campbell, John L

    2018-02-15

    To evaluate the feasibility, acceptability and effectiveness of webGP as piloted by six general practices. Mixed-methods evaluation, including data extraction from practice databases, general practitioner (GP) completion of case reports, patient questionnaires and staff interviews. General practices in NHS Northern, Eastern and Western Devon Clinical Commissioning Group's area approximately 6 months after implementing webGP (February-July 2016). Six practices provided consultations data; 20 GPs completed case reports (regarding 61 e-consults); 81 patients completed questionnaires; 5 GPs and 5 administrators were interviewed. Attitudes and experiences of practice staff and patients regarding webGP. WebGP uptake during the evaluation was small, showing no discernible impact on practice workload. The completeness of cross-sectional data on consultation workload varied between practices.GPs judged 41/61 (72%) of webGP requests to require a face-to-face or telephone consultation. Introducing webGP appeared to be associated with shifts in responsibility and workload between practice staff and between practices and patients.81/231 patients completed a postal survey (35.1% response rate). E-Consulters were somewhat younger and more likely to be employed than face-to-face respondents. WebGP appeared broadly acceptable to patients regarding timeliness and quality/experience of care provided. Similar problems were presented by all respondents. Both groups appeared equally familiar with other practice online services; e-consulters were somewhat more likely to have used them.From semistructured staff interviews, it appeared that, while largely acceptable within practice, introducing e-consults had potential for adverse interactions with pre-existing practice systems. There is potential to assess the impact of new systems on consultation patterns by extracting routine data from practice databases. Staff and patients noticed subtle changes to responsibilities associated with

  1. Ordered mesoporous silica prepared by quiescent interfacial growth method - effects of reaction chemistry

    Science.gov (United States)

    2013-01-01

    Acidic interfacial growth can provide a number of industrially important mesoporous silica morphologies including fibers, spheres, and other rich shapes. Studying the reaction chemistry under quiescent (no mixing) conditions is important for understanding and for the production of the desired shapes. The focus of this work is to understand the effect of a number of previously untested conditions: acid type (HCl, HNO3, and H2SO4), acid content, silica precursor type (TBOS and TEOS), and surfactant type (CTAB, Tween 20, and Tween 80) on the shape and structure of products formed under quiescent two-phase interfacial configuration. Results show that the quiescent growth is typically slow due to the absence of mixing. The whole process of product formation and pore structuring becomes limited by the slow interfacial diffusion of silica source. TBOS-CTAB-HCl was the typical combination to produce fibers with high order in the interfacial region. The use of other acids (HNO3 and H2SO4), a less hydrophobic silica source (TEOS), and/or a neutral surfactant (Tweens) facilitate diffusion and homogenous supply of silica source into the bulk phase and give spheres and gyroids with low mesoporous order. The results suggest two distinct regions for silica growth (interfacial region and bulk region) in which the rate of solvent evaporation and local concentration affect the speed and dimension of growth. A combined mechanism for the interfacial bulk growth of mesoporous silica under quiescent conditions is proposed. PMID:24237719

  2. Growth Factor Inhibiting PKC Sensor in E-coli Environment Using Classification Technique and ANN Method

    Directory of Open Access Journals (Sweden)

    T. K. BASAK

    2011-03-01

    Full Text Available Protein kinease C plays an important role in angiogenesis and apoptosis in cancer. During the phase of angiogenesis the growth factor is up regulated where as during apoptosis the growth factor is down regulated. For down regulation of growth factor the pH environment of intra-cellular fluid has a specific range in the alkaline medium. Protein kinease C along with E-coli through interaction of Selenometabolite is able to maintain that alkaline environment for the apoptosis of the cancer cell with inhibition of the growth factor related to antioxidant/oxidant ratio. The present paper through implementation of Artificial Neural Network and Decision Tree has focused on metastasis linked with Capacitance Relaxation phenomena and down regulation of growth factor (VGEF. In this paper a distributed neural network has been applied to a data mining problem for classification of cancer stages inorder to have proper diagnosis of patient with PKC sensor. The Network was trained off line using 270 patterns each of 6 inputs. Using the weight obtained during training, fresh patterns were tested for accuracy in diagnosis linked with the stages of cancer.

  3. Geospatial semantic web

    CERN Document Server

    Zhang, Chuanrong; Li, Weidong

    2015-01-01

    This book covers key issues related to Geospatial Semantic Web, including geospatial web services for spatial data interoperability; geospatial ontology for semantic interoperability; ontology creation, sharing, and integration; querying knowledge and information from heterogeneous data source; interfaces for Geospatial Semantic Web, VGI (Volunteered Geographic Information) and Geospatial Semantic Web; challenges of Geospatial Semantic Web; and development of Geospatial Semantic Web applications. This book also describes state-of-the-art technologies that attempt to solve these problems such as WFS, WMS, RDF, OWL, and GeoSPARQL, and demonstrates how to use the Geospatial Semantic Web technologies to solve practical real-world problems such as spatial data interoperability.

  4. DISTANCE LEARNING ONLINE WEB 3 .0

    Directory of Open Access Journals (Sweden)

    S. M. Petryk

    2015-05-01

    Full Text Available This article analyzes the existing methods of identification information in the semantic web, outlines the main problems of its implementation and researches the use of Semantic Web as the part of distance learning. Proposed alternative variant of identification and relationship construction of information and acquired knowledge based on the developed method “spectrum of knowledge”

  5. Layer-by-Layer Method for the Synthesis and Growth of Surface Mounted Metal-Organic Frameworks (SURMOFs

    Directory of Open Access Journals (Sweden)

    Osama Shekhah

    2010-02-01

    Full Text Available A layer-by-layer method has been developed for the synthesis of metal-organic frameworks (MOFs and their deposition on functionalized organic surfaces. The approach is based on the sequential immersion of functionalized organic surfaces into solutions of the building blocks of the MOF, i.e., the organic ligand and the inorganic unit. The synthesis and growth of different types of MOFs on substrates with different functionalization, like COOH, OH and pyridine terminated surfaces, were studied and characterized with different surface characterization techniques. A controlled and highly oriented growth of very homogenous films was obtained using this method. The layer-by-layer method offered also the possibility to study the kinetics of film formation in more detail using surface plasmon resonance and quartz crystal microbalance. In addition, this method demonstrates the potential to synthesize new classes of MOFs not accessible by conventional methods. Finally, the controlled growth of MOF thin films is important for many applications like chemical sensors, membranes and related electrodes.

  6. Quarter elliptical crack growth using three dimensional finite element method and crack closure technique

    Energy Technology Data Exchange (ETDEWEB)

    Gozin, Mohammad-Hosein; Aghaie-Khafri, Mehrdad [K. N. Toosi University of Technology, Tehran (Korea, Republic of)

    2014-06-15

    Shape evolution of a quarter-elliptical crack emanating from a hole is studied. Three dimensional elastic-plastic finite element analysis of the fatigue crack closure was considered and the stress intensity factor was calculated based on the duplicated elastic model at each crack tip node. The crack front node was advanced proportional to the imposed effective stress intensity factor. Remeshing was applied at each step of the crack growth and solution mapping algorithm was considered. Crack growth retardation at free surfaces was successfully observed. A MATLAB-ABAQUS interference code was developed for the first time to perform crack growth on the basis of crack closure. Simulation results indicated that crack shape is sensitive to the remeshing strategy. Predictions based on the proposed models were in good agreement with Carlson's experiments results.

  7. Posttraumatic growth following a first episode of psychosis: a mixed methods research protocol using a convergent design.

    Science.gov (United States)

    Jordan, Gerald; Malla, Ashok; Iyer, Srividya N

    2016-07-25

    The suffering people experience following a first episode of psychosis is great, and has been well-investigated. Conversely, potential positive outcomes following a first episode of psychosis have been under-investigated. One such outcome that may result from a first episode of psychosis is posttraumatic growth, or a positive aftermath following the trauma of a first psychotic episode. While posttraumatic growth has been described following other physical and mental illnesses, posttraumatic growth has received very little attention following a first episode of psychosis. To address this research gap, we will conduct a mixed methods study aimed at answering two research questions: 1) How do people experience posttraumatic growth following a first episode of psychosis? 2) What predicts, or facilitates, posttraumatic growth following a first episode of psychosis? The research questions will be investigated using a mixed methods convergent design. All participants will be service-users being offered treatment for a first episode of psychosis at a specialized early intervention service for young people with psychosis, as well as their case managers.. A qualitative descriptive methodology will guide data-collection through semi-structured interviews with service-users. Service-users and case managers will complete questionnaires related to posttraumatic growth and its potential predictors using quantitative methods. These predictors include the impact a first episode of psychosis on service-users' lives, the coping strategies they use; the level of social support they enjoy; and their experiences of resilience and recovery. Qualitative data will be subject to thematic analysis, quantitative data will be subject to multiple regression analyses, and results from both methods will be combined to answer the research questions in a holistic way. Findings from this study are expected to show that in addition to suffering, people with a first episode of psychosis may experience

  8. Virtual Web Services

    OpenAIRE

    Rykowski, Jarogniew

    2007-01-01

    In this paper we propose an application of software agents to provide Virtual Web Services. A Virtual Web Service is a linked collection of several real and/or virtual Web Services, and public and private agents, accessed by the user in the same way as a single real Web Service. A Virtual Web Service allows unrestricted comparison, information merging, pipelining, etc., of data coming from different sources and in different forms. Detailed architecture and functionality of a single Virtual We...

  9. The Semantic Web Revisited

    OpenAIRE

    Shadbolt, Nigel; Berners-Lee, Tim; Hall, Wendy

    2006-01-01

    The original Scientific American article on the Semantic Web appeared in 2001. It described the evolution of a Web that consisted largely of documents for humans to read to one that included data and information for computers to manipulate. The Semantic Web is a Web of actionable information--information derived from data through a semantic theory for interpreting the symbols.This simple idea, however, remains largely unrealized. Shopbots and auction bots abound on the Web, but these are esse...

  10. Web Project Management

    OpenAIRE

    Suralkar, Sunita; Joshi, Nilambari; Meshram, B B

    2013-01-01

    This paper describes about the need for Web project management, fundamentals of project management for web projects: what it is, why projects go wrong, and what's different about web projects. We also discuss Cost Estimation Techniques based on Size Metrics. Though Web project development is similar to traditional software development applications, the special characteristics of Web Application development requires adaption of many software engineering approaches or even development of comple...

  11. Growth of GaN single crystals by a Ca- and Ba-added Na flux method

    Science.gov (United States)

    Ukegawa, H.; Konishi, Y.; Fujimori, T.; Miyoshi, N.; Imade, M.; Yoshimura, M.; Kitaoka, Y.; Sasaki, T.; Mori, Y.

    2011-02-01

    GaN substrates are desirable for fabricating ultra-violet LEDs and LDs, and high-power and high-frequency transistors. High-quality GaN single crystals can be obtained by using Na flux method, but the growth habit of bulk crystals must be controlled. In this study, we investigated the effects of additives (Ca, Ba) on the growth habit and impurity concentration in the crystals. The aspect ratio (c/a) of the crystals was increased by increasing the amount of additives, showing that the growth habit could be changed from the pyramidal shape to the prism shape. Ba concentration was below the detection limit (1x1015 atoms/cm3).

  12. Simple control of surface topography of gold nanoshells by a surfactant-less seeded-growth method.

    Science.gov (United States)

    Topete, Antonio; Alatorre-Meda, Manuel; Villar-Álvarez, Eva M; Cambón, Adriana; Barbosa, Silvia; Taboada, Pablo; Mosquera, Víctor

    2014-07-23

    We report the synthesis of branched gold nanoshells (BGNS) through a seeded-growth surfactant-less method. This was achieved by decorating chitosan-Pluronic F127 stabilized poly(lactic-co-gycolic) acid nanoparticles (NPs) with Au seeds (NP-seed), using chitosan as an electrostatic self-assembling agent. Branched shells with different degrees of anisotropy and optical response were obtained by modulating the ratios of HAuCl4/K2CO3 growth solution, ascorbic acid (AA) and NP-seed precursor. Chitosan and AA were crucial in determining the BGNS size and structure, acting both as coreductants and structure directing growth agents. Preliminary cytotoxicity experiments point to the biocompatibility of the obtained BGNS, allowing their potential use in biomedical applications. In particular, these nanostructures with "hybrid" compositions, which combine the features of gold nanoshells and nanostars showed a better performance as surface enhanced Raman spectroscopy probes in detecting intracellular cell components than classical smoother nanoshells.

  13. Community Engagement to Optimize the Use of Web-Based and Wearable Technology in a Cardiovascular Health and Needs Assessment Study: A Mixed Methods Approach.

    Science.gov (United States)

    Yingling, Leah R; Brooks, Alyssa T; Wallen, Gwenyth R; Peters-Lawrence, Marlene; McClurkin, Michael; Cooper-McCann, Rebecca; Wiley, Kenneth L; Mitchell, Valerie; Saygbe, Johnetta N; Johnson, Twanda D; Curry, Rev Kendrick E; Johnson, Allan A; Graham, Avis P; Graham, Lennox A; Powell-Wiley, Tiffany M

    2016-04-25

    Resource-limited communities in Washington, D.C. have high rates of obesity-related cardiovascular disease in addition to inadequate physical activity (PA) facilities and limited Internet access. Engaging community members in the design and implementation of studies to address these health disparities is essential to the success of community-based PA interventions. The objective of the study was to use qualitative and quantitative methods to evaluate the feasibility and acceptability of PA-monitoring wristbands and Web-based technology by predominantly African American, church-based populations in resource-limited Washington, D.C. neighborhoods. To address cardiovascular health in at-risk populations in Washington, D.C., we joined community leaders to establish a community advisory board, the D.C. Cardiovascular Health and Obesity Collaborative (D.C. CHOC). As their first initiative, the Washington, D.C. Cardiovascular Health and Needs Assessment intends to evaluate cardiovascular health, social determinants of health, and PA-monitoring technologies. At the recommendation of D.C. CHOC members, we conducted a focus group and piloted the proposed PA-monitoring system with community members representing churches that would be targeted by the Cardiovascular Health and Needs Assessment. Participants (n=8) agreed to wear a PA-monitoring wristband for two weeks and to log cardiovascular health factors on a secure Internet account. Wristbands collected accelerometer-based data that participants uploaded to a wireless hub at their church. Participants agreed to return after two weeks to participate in a moderated focus group to share experiences using this technology. Feasibility was measured by Internet account usage, wristband utilization, and objective PA data. Acceptability was evaluated through thematic analysis of verbatim focus group transcripts. Study participants (5 males, 3 females) were African American and age 28-70 years. Participant wristbands recorded data on

  14. The Spectral Web of stationary plasma equilibria. II. Internal modes

    Science.gov (United States)

    Goedbloed, J. P.

    2018-03-01

    The new method of the Spectral Web to calculate the spectrum of waves and instabilities of plasma equilibria with sizeable flows, developed in the preceding Paper I [Goedbloed, Phys. Plasmas 25, 032109 (2018)], is applied to a collection of classical magnetohydrodynamic instabilities operating in cylindrical plasmas with shear flow or rotation. After a review of the basic concepts of the complementary energy giving the solution path and the conjugate path, which together constitute the Spectral Web, the cylindrical model is presented and the spectral equations are derived. The first example concerns the internal kink instabilities of a cylindrical force-free magnetic field of constant α subjected to a parabolic shear flow profile. The old stability diagram and the associated growth rate calculations for static equilibria are replaced by a new intricate stability diagram and associated complex growth rates for the stationary model. The power of the Spectral Web method is demonstrated by showing that the two associated paths in the complex ω-plane nearly automatically guide to the new class of global Alfvén instabilities of the force-free configuration that would have been very hard to predict by other methods. The second example concerns the Rayleigh-Taylor instability of a rotating theta-pinch. The old literature is revisited and shown to suffer from inconsistencies that are remedied. The most global n = 1 instability and a cluster sequence of more local but much more unstable n =2 ,3 ,…∞ modes are located on separate solution paths in the hydrodynamic (HD) version of the instability, whereas they merge in the MHD version. The Spectral Web offers visual demonstration of the central position the HD flow continuum and of the MHD Alfvén and slow magneto-sonic continua in the respective spectra by connecting the discrete modes in the complex plane by physically meaningful curves towards the continua. The third example concerns the magneto-rotational instability

  15. Influence of the Hydrothermal Method Growth Parameters on the Zinc Oxide Nanowires Deposited on Several Substrates

    Directory of Open Access Journals (Sweden)

    Concepción Mejía-García

    2014-01-01

    Full Text Available We report the synthesis of ZnO nanowires grown on several substrates (PET, glass, and Si using a two-step process: (a preparation of the seed layer on the substrate by spin coating, from solutions of zinc acetate dihydrate and 1-propanol, and (b growth of the ZnO nanostructures by dipping the substrate in an equimolar solution of zinc nitrate hexahydrate and hexamethylenetetramine. Subsequently, films were thermally treated with a commercial microwave oven (350 and 700 W for 5, 20, and 35 min. The ZnO nanowires obtained were characterized structurally, morphologically, and optically using XRD, SEM, and UV-VIS transmission, respectively. XRD patterns spectra revealed the presence of Zn(OH2 on the films grown on glass and Si substrates. A preferential orientation along c-axis directions for films grown on PET substrate was observed. An analysis by SEM revealed that the growth of the ZnO nanowires on PET and glass is better than the growth on Si when the same growth parameters are used. On glass substrates, ZnO nanowires less than 50 nm in diameter and between 200 nm and 1200 nm in length were obtained. The ZnO nanowires band gap energy for the films grown on PET and glass was obtained from optical transmission spectra.

  16. New improved method for evaluation of growth by food related fungi on biologically derived materials

    DEFF Research Database (Denmark)

    Bergenholtz, Karina P.; Nielsen, Per Væggemose

    2002-01-01

    Biologically derived materials, obtained as commercial and raw materials (Polylactate (PLA), Polyhydroxybutyrate (PHB), potato, wheat and corn starch) were tested for their ability to support fungal growth using a modified ASTM G21-96 (American Society for Testing and Materials) standard as well...

  17. Time dependent growth of vertically aligned carbon nanotube forest using a laser activated catalytical CVD method

    NARCIS (Netherlands)

    Haluska, M.; Bellouard, Y.J.; Dietzel, A.H.

    2008-01-01

    We report the growth of vertically aligned single-wall and multi-wall carbon nanotube forest using a Laser Activated - Catalytic Chemical Vapor Deposition process. The experiments were performed in a cold-wall reactor filled with an ethylene-hydrogen-argon gas mixture in a 5:2:8 ratio at ambient

  18. Growth of Nd doped LiNbO3 crystals using Bridgman method and its ...

    Indian Academy of Sciences (India)

    Administrator

    state for several hours so that a stable solid–liquid inter- face could ... growth would hold for about one week. ... Figure 4. The absorption spectrum of the Nd : LiNbO3 crystal. Figure 5. .... This work was supported by K C Wong Magna Fund in.

  19. Growth rates in modern speleothems from Santana Cave, Brazil, by the 210Pb-method

    International Nuclear Information System (INIS)

    Bonotto, D.M.; Karmann, I.; Baskaran, M.M.

    2012-01-01

    The Santana Cave is located at the Upper Ribeira Touristic State Park (PETAR-Parque Estadual Turístico do Alto Ribeira) in southern São Paulo State, Brazil. This paper describes 210 Pb activity concentration data in soda straw stalactites samples collected at Salão das Flores in Santana Cave that is a fossil tributary of the cave river. Non-expensive alpha counting following some analytical steps for extracting and depositing 210 Po were used for providing the 210 Pb data. In the analyzed samples, 210 Pb values of increasingly older samples fitted an exponential curve, thus suggesting that the production of 210 Pb has been constant with time. Also, the near-ideal fit indicated that the growth was uniform and there was no break in the continuous growth. The soda straw growth rates were determined from the best fit to the exponential curve through the 210 Pb activity concentration. The results of the measurements allowed estimate a longitudinal rate corresponding to 1.3 mm/yr and a lateral rate of 0.01 mm/yr, which permitted calculate times of 70 years and 317–498 years for their formation, respectively. The lateral growth rate is compatible with values from studies of chemical weathering rates held under laboratory and natural conditions.

  20. Semantic Web Technologies for the Adaptive Web

    DEFF Research Database (Denmark)

    Dolog, Peter; Nejdl, Wolfgang

    2007-01-01

    Ontologies and reasoning are the key terms brought into focus by the semantic web community. Formal representation of ontologies in a common data model on the web can be taken as a foundation for adaptive web technologies as well. This chapter describes how ontologies shared on the semantic web...... provide conceptualization for the links which are a main vehicle to access information on the web. The subject domain ontologies serve as constraints for generating only those links which are relevant for the domain a user is currently interested in. Furthermore, user model ontologies provide additional...... means for deciding which links to show, annotate, hide, generate, and reorder. The semantic web technologies provide means to formalize the domain ontologies and metadata created from them. The formalization enables reasoning for personalization decisions. This chapter describes which components...

  1. Applying semantic web services to enterprise web

    OpenAIRE

    Hu, Y; Yang, Q P; Sun, X; Wei, P

    2008-01-01

    Enterprise Web provides a convenient, extendable, integrated platform for information sharing and knowledge management. However, it still has many drawbacks due to complexity and increasing information glut, as well as the heterogeneity of the information processed. Research in the field of Semantic Web Services has shown the possibility of adding higher level of semantic functionality onto the top of current Enterprise Web, enhancing usability and usefulness of resource, enabling decision su...

  2. Web Based Customized Design

    OpenAIRE

    Moi, Morten Benestad

    2013-01-01

    This thesis studies the methods needed to create a web based application to remotely customize a CAD model. This includes customizing a CAD model by using a graphical user interface to be able to remotely control the inputs to- and outputs from the model in NX, and to get the result sent back to the user. Using CAD systems such as NX requires intensive training, is often a slow process and gives a lot of room for errors. An intuitive, simple user interface will eliminate the need for CAD trai...

  3. Adherence to a Web-Based Physical Activity Intervention for Patients With Knee and/or Hip Osteoarthritis: A Mixed Method Study

    NARCIS (Netherlands)

    Bossen, D.; Buskermolen, M.; Veenhof, C.; de Bakker, D.H.; Dekker, J.

    2013-01-01

    Background: Web-based interventions show promise in promoting a healthy lifestyle, but their effectiveness is hampered by high rates of nonusage. Predictors and reasons for (non)usage are not well known. Identifying which factors are related to usage contributes to the recognition of subgroups who

  4. The Experience of Bulimic College Students Who Use "Pro-Ana/Pro-Mia" Web Sites: A Two-Phase Mixed-Method Study

    Science.gov (United States)

    Davis, Blair J.

    2010-01-01

    Eating disorders (EDs) are a serious problem in the U.S. due to their rise in prevalence during the 20th century and high morbidity and mortality rates. A relatively new, controversial phenomenon, "pro-Ana" (pro-anorexia) and "pro-Mia" (pro-bulimia) Web sites, came to the public's attention around 2000. These sites are created by and for people…

  5. Web-Based Evidence Based Practice Educational Intervention to Improve EBP Competence among BSN-Prepared Pediatric Bedside Nurses: A Mixed Methods Pilot Study

    Science.gov (United States)

    Laibhen-Parkes, Natasha

    2014-01-01

    For pediatric nurses, their competence in EBP is critical for providing high-quality care and maximizing patient outcomes. The purpose of this pilot study was to assess and refine a Web-based EBP educational intervention focused on improving EBP beliefs and competence in BSN-prepared pediatric bedside nurses, and to examine the feasibility,…

  6. Workspaces in the Semantic Web

    Science.gov (United States)

    Wolfe, Shawn R.; Keller, RIchard M.

    2005-01-01

    Due to the recency and relatively limited adoption of Semantic Web technologies. practical issues related to technology scaling have received less attention than foundational issues. Nonetheless, these issues must be addressed if the Semantic Web is to realize its full potential. In particular, we concentrate on the lack of scoping methods that reduce the size of semantic information spaces so they are more efficient to work with and more relevant to an agent's needs. We provide some intuition to motivate the need for such reduced information spaces, called workspaces, give a formal definition, and suggest possible methods of deriving them.

  7. Growth of ZrSiO4 single crystal by flux method

    International Nuclear Information System (INIS)

    Ushio, Masumi; Nishitani, Yoshinari

    1982-01-01

    ZrSiO 4 single crystals were grown from the Na 2 O.3 V 2 O 5 fluxed melt at constant soaking temperatures of 900 0 C and 1000 0 C for periods up to 1710h, using the natural zircon seeds. Temperature difference between the seed and nutrient was 0.5 -- 5 0 C. A solubility curve of the natural zircon in Na 2 O.3 V 2 O 5 was determined. It was found that about 5.7g of the natural crystal dissolved in Na 2 O.3 V 2 O 5 in 48h at 1000 0 C and about 7.5g at 1200 0 C. .the maximum growth weight was about 0.35 2 g under conditions of the temperature difference of 2 0 C and the soaking for 1205h at 1000 0 C. The grown crystal was initially bounded with the c-, m-, p-, a-planes and very small planes consisting of the u- and x-, and finally bounded with the m- and p-planes. The observed linear growth rates of planes of ZrSiO 4 single crystals were in the following order:a(100) > c(001) > p(111) > m(110). The growth rates of a- and m-planes were about 5 -- 7 x 10 -4 mm/h and 0.9 -- 1.0 x 10 -4 mm/h, respectively. The growth hillocks of rounded triangular shape and elliptic shape extended to the direction of c-axis, were observed on the p- and m-planes, respectively. The observed step distence of the spiral and the step height were about 0.97 5 μm and 0.17 2 μm, respectively. The observed linear rate of advance of the step on the m-plane was about 0.4 0 -- 1.2 x 10 -8 cm/s. A linear growth rate of the m-plane was then calculated to be 0.2 5 -- 0.7 1 x 10 -4 mm/h by the BCF theory, which agreed in order of magnitude with the observes growth rate of the m-plabe. (author)

  8. Sounds of Web Advertising

    DEFF Research Database (Denmark)

    Jessen, Iben Bredahl; Graakjær, Nicolai Jørgensgaard

    2010-01-01

    Sound seems to be a neglected issue in the study of web ads. Web advertising is predominantly regarded as visual phenomena–commercial messages, as for instance banner ads that we watch, read, and eventually click on–but only rarely as something that we listen to. The present chapter presents...... an overview of the auditory dimensions in web advertising: Which kinds of sounds do we hear in web ads? What are the conditions and functions of sound in web ads? Moreover, the chapter proposes a theoretical framework in order to analyse the communicative functions of sound in web advertising. The main...... argument is that an understanding of the auditory dimensions in web advertising must include a reflection on the hypertextual settings of the web ad as well as a perspective on how users engage with web content....

  9. How the "Understanding Research Evidence" Web-Based Video Series From the National Collaborating Centre for Methods and Tools Contributes to Public Health Capacity to Practice Evidence-Informed Decision Making: Mixed-Methods Evaluation.

    Science.gov (United States)

    Chan, Linda; Mackintosh, Jeannie; Dobbins, Maureen

    2017-09-28

    The National Collaborating Centre for Methods and Tools (NCCMT) offers workshops and webinars to build public health capacity for evidence-informed decision-making. Despite positive feedback for NCCMT workshops and resources, NCCMT users found key terms used in research papers difficult to understand. The Understanding Research Evidence (URE) videos use plain language, cartoon visuals, and public health examples to explain complex research concepts. The videos are posted on the NCCMT website and YouTube channel. The first four videos in the URE web-based video series, which explained odds ratios (ORs), confidence intervals (CIs), clinical significance, and forest plots, were evaluated. The evaluation examined how the videos affected public health professionals' practice. A mixed-methods approach was used to examine the delivery mode and the content of the videos. Specifically, the evaluation explored (1) whether the videos were effective at increasing knowledge on the four video topics, (2) whether public health professionals were satisfied with the videos, and (3) how public health professionals applied the knowledge gained from the videos in their work. A three-part evaluation was conducted to determine the effectiveness of the first four URE videos. The evaluation included a Web-based survey, telephone interviews, and pretest and posttests, which evaluated public health professionals' experience with the videos and how the videos affected their public health work. Participants were invited to participate in this evaluation through various open access, public health email lists, through informational flyers and posters at the Canadian Public Health Association (CPHA) conference, and through targeted recruitment to NCCMT's network. In the Web-based surveys (n=46), participants achieved higher scores on the knowledge assessment questions from watching the OR (P=.04), CI (P=.04), and clinical significance (P=.05) videos but not the forest plot (P=.12) video, as

  10. Comparison between two meshless methods based on collocation technique for the numerical solution of four-species tumor growth model

    Science.gov (United States)

    Dehghan, Mehdi; Mohammadi, Vahid

    2017-03-01

    As is said in [27], the tumor-growth model is the incorporation of nutrient within the mixture as opposed to being modeled with an auxiliary reaction-diffusion equation. The formulation involves systems of highly nonlinear partial differential equations of surface effects through diffuse-interface models [27]. Simulations of this practical model using numerical methods can be applied for evaluating it. The present paper investigates the solution of the tumor growth model with meshless techniques. Meshless methods are applied based on the collocation technique which employ multiquadrics (MQ) radial basis function (RBFs) and generalized moving least squares (GMLS) procedures. The main advantages of these choices come back to the natural behavior of meshless approaches. As well as, a method based on meshless approach can be applied easily for finding the solution of partial differential equations in high-dimension using any distributions of points on regular and irregular domains. The present paper involves a time-dependent system of partial differential equations that describes four-species tumor growth model. To overcome the time variable, two procedures will be used. One of them is a semi-implicit finite difference method based on Crank-Nicolson scheme and another one is based on explicit Runge-Kutta time integration. The first case gives a linear system of algebraic equations which will be solved at each time-step. The second case will be efficient but conditionally stable. The obtained numerical results are reported to confirm the ability of these techniques for solving the two and three-dimensional tumor-growth equations.

  11. Effects of Irrigation Methods on the Growth of Petunia Grown in Heat Fusion Polyester Fiber Hardened Medium without Polythylene Pot

    OpenAIRE

    後藤, 丹十郎; 島, 浩二; 東, 千里; 森下, 照久; 藤井, 一徳; 元岡, 茂治

    2006-01-01

    Recenty, polyethylene pots(PP) present a significant environmental issue for waste disposal. To develop bedding plant production system without PP, properties of compacted medium hardened by heat fusion polyester fiber were investigated. Effects of irrigation methods on the growth of vegetative propagated petunia grown in medium without PP were investigated. The effect of medium type was not as significant as the difference in water loss per pot. Water loss per pot of medium without PP was ab...

  12. Evaluating the robustness of three ring-width measurement methods for growth release reconstruction

    Czech Academy of Sciences Publication Activity Database

    Maes, S. L.; Vannoppen, A.; Altman, Jan; Van den Bulcke, J.; Decocq, G.; De Mil, T.; Depauw, L.; Landuyt, D.; Perring, M. P.; Van Acker, J.; Vanhellemont, M.; Verheyen, K.

    2017-01-01

    Roč. 46, DEC 2017 (2017), s. 67-76 ISSN 1125-7865 R&D Projects: GA ČR(CZ) GA17-07378S; GA ČR(CZ) GA14-12262S Institutional support: RVO:67985939 Keywords : Dendrochronology * Growth release * Ring-width measurement Subject RIV: EH - Ecology, Behaviour OBOR OECD: Ecology Impact factor: 2.259, year: 2016

  13. Surface reconstruction: An effective method for the growth of mismatched materials

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yu; Zheng, Beining; Wu, Xiaofeng; Yuan, Long; Wu, Jie; Guo, Hongping; Huang, Keke; Feng, Shouhua, E-mail: shfeng@mail.jlu.edu.cn

    2016-01-01

    Graphical abstract: High quality thin film of GaSb was fabricated with molecular beam epitaxy technique on the reconstructed Si(1 1 1) surface. - Highlights: • Surface reconstruction formed by different surface treatments controls the heteroepitaxial growth. • Mismatched stress can be effectively released when the mismatched material epi-film tilts out of the epitaxial interface plane to create a coincidence-site lattice. • GaSb films grown on Si(1 1 1)-(5√3 × 5√3)-Sb surface show better crystal quality and morphology for its self-assembled 2D fishbone structure. - Abstract: The crystalline quality of epitaxial films depends on the degree of lattice match between substrates and films. Here, we report a growth strategy for large mismatched epi-films to grow GaSb films on Si(1 1 1) substrates. The epitaxial strategy can be influenced by controlling the surface reconstructions of Sb-treated Si(1 1 1). The film with the best quality was grown on Si(1 1 1)-(5√3 × 5√3)-Sb surface due to the stress release and the formation of a self-assembled 2D fishbone structure. Controlled surface engineering provides an effective pathway towards the growth of the large mismatched materials.

  14. INVITED REVIEW: Inhibitors of myostatin as methods of enhancing muscle growth and development.

    Science.gov (United States)

    Chen, P R; Lee, K

    2016-08-01

    With the increasing demand for affordable, high-quality meat, livestock and poultry producers must continually find ways to maximize muscle growth in their animals without compromising palatability of the meat products. Muscle mass relies on myoblast proliferation during prenatal or prehatch stages and fiber hypertrophy through protein synthesis and nuclei donation by satellite cells after birth or hatch. Therefore, understanding the cellular and molecular mechanisms of myogenesis and muscle development is of great interest. Myostatin is a well-known negative regulator of muscle growth and development that inhibits proliferation and differentiation in myogenic cells as well as protein synthesis in existing muscle fibers. In this review, various inhibitors of myostatin activity or signaling are examined that may be used in animal agriculture for enhancing muscle growth. Myostatin inhibitors are relevant as potential therapies for muscle-wasting diseases and muscle weakness in humans and animals. Currently, there are no commercial myostatin inhibitors for agriculture or biomedical purposes because the safest and most effective option has yet to be identified. Further investigation of myostatin inhibitors and administration strategies may revolutionize animal production and the medical field.

  15. Comparison of manual mycobacteria growth indicator tube and epsilometer test with agar proportion method for susceptibility testing of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    N Karabulut

    2014-01-01

    Full Text Available Background and Objectives: Antimycobacterial susceptibility tests take weeks, and delayed therapy can lead to spread of Mycobacterium tuberculosis. Therefore, rapid, accurate and cost-effective methods are required for proper therapy selection. In this study, the Mycobacteria growth indicator tube (MGIT and epsilometer test (Etest methods were compared to the agar proportion method for susceptibility testing of Mycobacterium tuberculosis. Materials and Methods: The susceptibility tests against isoniazid (INH, rifampin (RIF, streptomycin (STM and ethambutol (ETM of 51 M. tuberculosis complex isolates were analyzed by the MGIT, Etest and agar proportion methods. Results: The concordance between MGIT/Etest and agar proportion methods was 98% for INH and 100% for RIF, STM, ETM. There were not statistically significant differences in results of the susceptibility tests between MGIT/Etest and the reference agar proportion method. Conclusion: The results have shown that MGIT and Etest methods can be used instead of the agar proportion method, because these two methods are more rapid and easier than the agar proportion method.

  16. The Role of Web-Based Health Information in Help-Seeking Behavior Prior to a Diagnosis of Lung Cancer: A Mixed-Methods Study.

    Science.gov (United States)

    Mueller, Julia; Jay, Caroline; Harper, Simon; Todd, Chris

    2017-06-08

    Delays to diagnosis in lung cancer can lead to reduced chance of survival, and patients often wait for several months before presenting symptoms. The time between first symptom recognition until diagnosis has been theorized into three intervals: symptom appraisal, help-seeking, and diagnostic interval (here: "pathway to diagnosis"). Interventions are needed to reduce delays to diagnosis in lung cancer. The Web has become an important lay health information source and could potentially play a role in this pathway to diagnosis. Our overall aim was to gain a preliminary insight into whether Web-based information plays a role in the pathway to diagnosis in lung cancer in order to assess whether it may be possible to leverage this information source to reduce delays to diagnosis. Patients diagnosed with lung cancer in the 6 months before study entry completed a survey about whether (and how, if yes) they had used the Web to appraise their condition prior to diagnosis. Based on survey responses, we purposively sampled patients and their next-of-kin for semistructured interviews (24 interviews; 33 participants). Interview data were analyzed qualitatively using Framework Analysis in the context of the pathway to diagnosis model. A total of 113 patients completed the survey (age: mean 67.0, SD 8.8 years). In all, 20.4% (23/113) reported they or next-of-kin had researched their condition online before the diagnosis. The majority of searches (20/23, 87.0%) were conducted by or with the help of next-of-kin. Interview results suggest that patients and next-of-kin perceived an impact of the information found online on all three intervals in the time to diagnosis. In the appraisal interval, participants used online information to evaluate symptoms and possible causes. In the help-seeking interval, the Web was used to inform the decision of whether to present to health services. In the diagnostic interval, it was used to evaluate health care professionals' advice, to support

  17. Web service based system for generating input data sets

    International Nuclear Information System (INIS)

    Kralev, Velin; Kraleva, Radoslava

    2011-01-01

    This article deals with a three-layer architectural model of a distributed information system based on Web services, which will be used for automatic generation of sets of input data. The information system will be constructed of a client layer, a service layer and of a data layer. The web services as a tool of developing distributed software systems will be presented briefly. A web service and the implementation of its web methods will be described. A way to use the developed web methods in real application will be proposed. Keywords: web services

  18. Where are the parasites in food webs?

    Directory of Open Access Journals (Sweden)

    Sukhdeo Michael VK

    2012-10-01

    Full Text Available Abstract This review explores some of the reasons why food webs seem to contain relatively few parasite species when compared to the full diversity of free living species in the system. At present, there are few coherent food web theories to guide scientific studies on parasites, and this review posits that the methods, directions and questions in the field of food web ecology are not always congruent with parasitological inquiry. For example, topological analysis (the primary tool in food web studies focuses on only one of six important steps in trematode life cycles, each of which requires a stable community dynamic to evolve. In addition, these transmission strategies may also utilize pathways within the food web that are not considered in traditional food web investigations. It is asserted that more effort must be focused on parasite-centric models, and a central theme is that many different approaches will be required. One promising approach is the old energetic perspective, which considers energy as the critical resource for all organisms, and the currency of all food web interactions. From the parasitological point of view, energy can be used to characterize the roles of parasites at all levels in the food web, from individuals to populations to community. The literature on parasite energetics in food webs is very sparse, but the evidence suggests that parasite species richness is low in food webs because parasites are limited by the quantity of energy available to their unique lifestyles.

  19. Where are the parasites in food webs?

    Science.gov (United States)

    2012-01-01

    This review explores some of the reasons why food webs seem to contain relatively few parasite species when compared to the full diversity of free living species in the system. At present, there are few coherent food web theories to guide scientific studies on parasites, and this review posits that the methods, directions and questions in the field of food web ecology are not always congruent with parasitological inquiry. For example, topological analysis (the primary tool in food web studies) focuses on only one of six important steps in trematode life cycles, each of which requires a stable community dynamic to evolve. In addition, these transmission strategies may also utilize pathways within the food web that are not considered in traditional food web investigations. It is asserted that more effort must be focused on parasite-centric models, and a central theme is that many different approaches will be required. One promising approach is the old energetic perspective, which considers energy as the critical resource for all organisms, and the currency of all food web interactions. From the parasitological point of view, energy can be used to characterize the roles of parasites at all levels in the food web, from individuals to populations to community. The literature on parasite energetics in food webs is very sparse, but the evidence suggests that parasite species richness is low in food webs because parasites are limited by the quantity of energy available to their unique lifestyles. PMID:23092160

  20. A mixed-method research to investigate the adoption of mobile devices and Web2.0 technologies among medical students and educators.

    Science.gov (United States)

    Fan, Si; Radford, Jan; Fabian, Debbie

    2016-04-19

    The past decade has witnessed the increasing adoption of Web 2.0 technologies in medical education. Recently, the notion of digital habitats, Web 2.0 supported learning environments, has also come onto the scene. While there has been initial research on the use of digital habitats for educational purposes, very limited research has examined the adoption of digital habitats by medical students and educators on mobile devices. This paper reports the Stage 1 findings of a two-staged study. The whole study aimed to develop and implement a personal digital habitat, namely digiMe, for medical students and educators at an Australian university. The first stage, however, examined the types of Web 2.0 tools and mobile devices that are being used by potential digiMe users, and reasons for their adoption. In this first stage of research, data were collected through a questionnaire and semi-structured interviews. Questionnaire data collected from 104 participants were analysed using the Predictive Analytics SoftWare (PASW). Frequencies, median and mean values were pursued. Kruskal Wallis tests were then performed to examine variations between views of different participant groups. Notes from the 6 interviews, together with responses to the open-ended section of the questionnaire, were analysed using the constructivist grounded theory approach, to generate key themes relevant to the adoption of Web 2.0 tools and mobile devices. The findings reflected the wide use of mobile devices, including both smart phones and computing tablets, by medical students and educators for learning, teaching and professional development purposes. Among the 22 types of Web 2.0 tools investigated, less than half of these tools were frequently used by the participants, this reflects the mismatch between users' desires and their actual practice. Age and occupation appeared to be the influential factors for their adoption. Easy access to information and improved communication are main purposes. This

  1. Teaching Students about Plagiarism Using a Web-Based Module

    Science.gov (United States)

    Stetter, Maria Earman

    2013-01-01

    The following research delivered a web-based module about plagiarism and paraphrasing to avoid plagiarism in both a blended method, with live instruction paired with web presentation for 105 students, and a separate web-only method for 22 other students. Participants were graduates and undergraduates preparing to become teachers, the majority of…

  2. Building web information systems using web services

    NARCIS (Netherlands)

    Frasincar, F.; Houben, G.J.P.M.; Barna, P.; Vasilecas, O.; Eder, J.; Caplinskas, A.

    2006-01-01

    Hera is a model-driven methodology for designing Web information systems. In the past a CASE tool for the Hera methodology was implemented. This software had different components that together form one centralized application. In this paper, we present a distributed Web service-oriented architecture

  3. Development of Content Management System-based Web Applications

    NARCIS (Netherlands)

    Souer, J.

    2012-01-01

    Web engineering is the application of systematic and quantifiable approaches (concepts, methods, techniques, tools) to cost-effective requirements analysis, design, implementation, testing, operation, and maintenance of high quality web applications. Over the past years, Content Management Systems

  4. Trust estimation of the semantic web using semantic web clustering

    Science.gov (United States)

    Shirgahi, Hossein; Mohsenzadeh, Mehran; Haj Seyyed Javadi, Hamid

    2017-05-01

    Development of semantic web and social network is undeniable in the Internet world these days. Widespread nature of semantic web has been very challenging to assess the trust in this field. In recent years, extensive researches have been done to estimate the trust of semantic web. Since trust of semantic web is a multidimensional problem, in this paper, we used parameters of social network authority, the value of pages links authority and semantic authority to assess the trust. Due to the large space of semantic network, we considered the problem scope to the clusters of semantic subnetworks and obtained the trust of each cluster elements as local and calculated the trust of outside resources according to their local trusts and trust of clusters to each other. According to the experimental result, the proposed method shows more than 79% Fscore that is about 11.9% in average more than Eigen, Tidal and centralised trust methods. Mean of error in this proposed method is 12.936, that is 9.75% in average less than Eigen and Tidal trust methods.

  5. Wordpress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2015-01-01

    This book is intended for WordPress developers and designers who want to develop quality web applications within a limited time frame and for maximum profit. Prior knowledge of basic web development and design is assumed.

  6. Promoting Your Web Site.

    Science.gov (United States)

    Raeder, Aggi

    1997-01-01

    Discussion of ways to promote sites on the World Wide Web focuses on how search engines work and how they retrieve and identify sites. Appropriate Web links for submitting new sites and for Internet marketing are included. (LRW)

  7. Practical web development

    CERN Document Server

    Wellens, Paul

    2015-01-01

    This book is perfect for beginners who want to get started and learn the web development basics, but also offers experienced developers a web development roadmap that will help them to extend their capabilities.

  8. EPA Web Taxonomy

    Data.gov (United States)

    U.S. Environmental Protection Agency — EPA's Web Taxonomy is a faceted hierarchical vocabulary used to tag web pages with terms from a controlled vocabulary. Tagging enables search and discovery of EPA's...

  9. Private Web Browsing

    National Research Council Canada - National Science Library

    Syverson, Paul F; Reed, Michael G; Goldschlag, David M

    1997-01-01

    .... These are both kept confidential from network elements as well as external observers. Private Web browsing is achieved by unmodified Web browsers using anonymous connections by means of HTTP proxies...

  10. Chemical Search Web Utility

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical Search Web Utility is an intuitive web application that allows the public to easily find the chemical that they are interested in using, and which...

  11. Crystal growth by Bridgman and Czochralski method of the ferromagnetic quantum critical material YbNi4P2

    Science.gov (United States)

    Kliemt, K.; Krellner, C.

    2016-09-01

    The tetragonal YbNi4P2 is one of the rare examples of compounds that allow the investigation of a ferromagnetic quantum critical point. We report in detail on two different methods which have been used to grow YbNi4P2 single crystals from a self-flux. The first, a modified Bridgman method, using a closed crucible system yields needle-shaped single crystals oriented along the [001]-direction. The second method, the Czochralski growth from a levitating melt, yields large single crystals which can be cut in any desired orientation. With this crucible-free method, samples without flux inclusions and a resistivity ratio at 1.8 K of RR1.8K = 17 have been grown.

  12. Nucleation and growth of microdroplets of ionic liquids deposited by physical vapor method onto different surfaces

    Science.gov (United States)

    Costa, José C. S.; Coelho, Ana F. S. M. G.; Mendes, Adélio; Santos, Luís M. N. B. F.

    2018-01-01

    Nanoscience and technology has generated an important area of research in the field of properties and functionality of ionic liquids (ILs) based materials and their thin films. This work explores the deposition process of ILs droplets as precursors for the fabrication of thin films, by means of physical vapor deposition (PVD). It was found that the deposition (by PVD on glass, indium tin oxide, graphene/nickel and gold-coated quartz crystal surfaces) of imidazolium [C4mim][NTf2] and pyrrolidinium [C4C1Pyrr][NTf2] based ILs generates micro/nanodroplets with a shape, size distribution and surface coverage that could be controlled by the evaporation flow rate and deposition time. No indication of the formation of a wetting-layer prior to the island growth was found. Based on the time-dependent morphological analysis of the micro/nanodroplets, a simple model for the description of the nucleation process and growth of ILs droplets is presented. The proposed model is based on three main steps: minimum free area to promote nucleation; first order coalescence; second order coalescence.

  13. PIV as a method for quantifying root cell growth and particle displacement in confocal images.

    Science.gov (United States)

    Bengough, A Glyn; Hans, Joachim; Bransby, M Fraser; Valentine, Tracy A

    2010-01-01

    Particle image velocimetry (PIV) quantifies displacement of patches of pixels between successive images. We evaluated PIV as a tool for microscopists by measuring displacements of cells and of a surrounding granular medium in confocal laser scanning microscopy images of Arabidopsis thaliana roots labeled with cell-membrane targeted green fluorescent protein. Excellent accuracy (e.g., displacement standard deviation PIV-predicted and actual displacements (r(2) > 0.83). Root mean squared error for these distorted images was 0.4-1.1 pixels, increasing at higher magnification factors. Cell growth and rhizosphere deformation were tracked with good temporal (e.g., 1-min interval) and spatial resolution, with PIV patches located on recognizable cell features being tracked more successfully. Appropriate choice of GFP-label was important to decrease small-scale biological noise due to intracellular motion. PIV of roots grown in stiff 2% versus 0.7% agar showed patterns of cell expansion consistent with physically impeded roots of other species. Roots in glass ballotini underwent rapid changes in growth direction on a timescale of minutes, associated with localized arching of ballotini. By tracking cell vertices, we monitored automatically cell length, width, and area every minute for 0.5 h for cells in different stages of development. In conclusion, PIV measured displacements successfully in images of living root cells and the external granular medium, revealing much potential for use by microscopists. (c) 2009 Wiley-Liss, Inc.

  14. An effective neodimium segregation coefficient in neodimium-doped yttrium-aluminum-garnet crystal growth by pulling method

    International Nuclear Information System (INIS)

    Shiroki, Ken-ichi; Kuwano, Yasuhiko

    1978-01-01

    Effective Nd segregation coefficient in the Nd:YAG (Nd-doped Y 3 Al 5 O 12 ) crystal growth by pulling method was determined precisely over 0 -- 1.3 atom% Nd concentration range at a 0.6 mm hr -1 growth rate. Two Nd:YAG crystals (-- 20 g) were grown from a large melt (-- 1 kg). Neodymium concentrations in the crystals and residual melts were estimated by fluorescent X-ray analysis, and a value of 0.21 was obtained as the effective segregation coefficient. Next, the optical absorption coefficient of Nd:YAG crystal at 5889 A absorption peak was measured in order to analyze a small specimen for Nd by optical absorption measurements. The optical absorption coefficient of 0.97 mm -1 .atom% -1 was determined in this way. The Nd concentrations, calculated by the segregation coefficient, agreed well with those obtained by optical absorption measurements at 5889 A for six successively grown Nd:YAG crystals. Therefore, the obtained segregation coefficient, 0.21, was confirmed as a reliable value for the Nd:YAG crystal growth by the pulling method. (auth.)

  15. Method for Bacterial Growth and Ammonia Production and Effect of Inhibitory Substances in Disposable Absorbent Hygiene Products.

    Science.gov (United States)

    Forsgren-Brusk, Ulla; Yhlen, Birgitta; Blomqvist, Marie; Larsson, Peter

    The purpose of this study was to evaluate a pragmatic laboratory method to provide a technique for developing incontinence products better able to reduce malodor when used in the clinical setting. Bacterial growth and bacterially formed ammonia in disposable absorbent incontinence products was measured by adding synthetic urine inoculated with bacteria to test samples cut from the crotch area of the product. The inhibitory effect's of low pH (4.5 and 4.9) and 3 antimicrobial substances-chlorhexidine, polyhexamethylene biguanide (PHMB), and thymol-at 2 concentrations each, were studied. From the initial inocula of 3.3 log colony-forming units per milliliter (cfu/mL) at baseline, the bacterial growth of the references increased to 5.0 to 6.0 log cfu/mL at 6 hours for Escherichia coli, Proteus mirabilis, and Enterococcus faecalis. At 12 hours there was a further increase to 7.0 to 8.9 log cfu/mL. Adjusting the pH of the superabsorbent in the incontinence product from 6.0 to pH 4.5 and pH 4.9 significantly (P disposable absorbent products to inhibit bacterial growth and ammonia production. This technique, we describe, provides a pragmatic method for assessing the odor-inhibiting capacity of specific incontinence products.

  16. Nursing students' preferences of strategies surrounding cinenurducation in a first year child growth and development courses: A mixed methods study.

    Science.gov (United States)

    Oh, Jina; Steefel, Lorraine

    2016-01-01

    Use of film in the classroom (cinenurducation) promotes nursing students' motivation and understanding of concepts about child growth and development; however, consensus has not been reached regarding students' preferred strategies and what they view as effective. To identify nursing students' preferences for pedagogical strategies surrounding film use in a Child Growth and Development course. A mixed methods study encompassing a concurrent triangulation strategy was undertaken. Eighty-three students attending the first year nursing class in the fall semester 2012 at a private University in South Korea participated. Films or film clips were shown either before or after pedagogical strategies including lecture, presentation, personal essay, group report, or group discussion, followed by a questionnaire to assess student preferences and their opinions on the impact of strategies on motivation and learning. A focus group with 10 participants provided their opinions. Although the preference for the time when films were watched showed no significant difference (t=.388, p=.699), participants preferred the following pedagogical methods: watching films with a group, saying this was more effective compared to watching films alone (t=5.488, pstrategies surrounding cinenurducation helped them gain conceptual knowledge in a Child Growth and Development course. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Growth and yield of patchouli (Pogostemon cablin, Benth) due to mulching and method of fertilizer on rain-fed land

    Science.gov (United States)

    Nasruddin; Harahap, E. M.; Hanum, C.; Siregar, L. A. M.

    2018-02-01

    The drought stress that occurs during growth results in a drastic reduction in growth and yield. This study was aimed to study the effect of mulching and method of fertilizer application in reducing the impact of drought stress on patchouli plants. The experiment was conducted from July to December 2016 using a split plot design into three replications with two treatment factors. The first factor was mulch factor with three levels, i.e. M0 (without mulch), M1 (rice straw mulch) and M2 (silver black plastic mulch). The second factor was the method of fertilizer application consisting of three stages: C1 (once), C2 (twice), C3 (three times). The parameters included plant height, number of branches, number of leaves, root length, wet weight of plant, root canopy ratio, total of chlorophyll, soil temperature and soil moisture content. The results showed the use of straw mulch reduce the impact of drought stress on patchouli plants. Two times fertilizer application gave better growth and yield. The use of straw mulch produced lower temperature degrees and maintained soil moisture content.

  18. A comparison of diamond growth rate using in-liquid and conventional plasma chemical vapor deposition methods

    International Nuclear Information System (INIS)

    Takahashi, Yoshiyuki; Toyota, Hiromichi; Nomura, Shinfuku; Mukasa, Shinobu; Inoue, Toru

    2009-01-01

    In order to make high-speed deposition of diamond effective, diamond growth rates for gas-phase microwave plasma chemical vapor deposition and in-liquid microwave plasma chemical vapor deposition are compared. A mixed gas of methane and hydrogen is used as the source gas for the gas-phase deposition, and a methanol solution of ethanol is used as the source liquid for the in-liquid deposition. The experimental system pressure is in the range of 60-150 kPa. While the growth rate of diamond increases as the pressure increases, the amount of input microwave energy per unit volume of diamond is 1 kW h/mm 3 regardless of the method used. Since the in-liquid deposition method provides a superior cooling effect through the evaporation of the liquid itself, a higher electric input power can be applied to the electrodes under higher pressure environments. The growth rate of in-liquid microwave plasma chemical vapor deposition process is found to be greater than conventional gas-phase microwave plasma chemical vapor deposition process under the same pressure conditions.

  19. A comparison of diamond growth rate using in-liquid and conventional plasma chemical vapor deposition methods

    Science.gov (United States)

    Takahashi, Yoshiyuki; Toyota, Hiromichi; Nomura, Shinfuku; Mukasa, Shinobu; Inoue, Toru

    2009-06-01

    In order to make high-speed deposition of diamond effective, diamond growth rates for gas-phase microwave plasma chemical vapor deposition and in-liquid microwave plasma chemical vapor deposition are compared. A mixed gas of methane and hydrogen is used as the source gas for the gas-phase deposition, and a methanol solution of ethanol is used as the source liquid for the in-liquid deposition. The experimental system pressure is in the range of 60-150 kPa. While the growth rate of diamond increases as the pressure increases, the amount of input microwave energy per unit volume of diamond is 1 kW h/mm3 regardless of the method used. Since the in-liquid deposition method provides a superior cooling effect through the evaporation of the liquid itself, a higher electric input power can be applied to the electrodes under higher pressure environments. The growth rate of in-liquid microwave plasma chemical vapor deposition process is found to be greater than conventional gas-phase microwave plasma chemical vapor deposition process under the same pressure conditions.

  20. Web Application Vulnerabilities

    OpenAIRE

    Yadav, Bhanu

    2014-01-01

    Web application security has been a major issue in information technology since the evolvement of dynamic web application. The main objective of this project was to carry out a detailed study on the top three web application vulnerabilities such as injection, cross site scripting, broken authentication and session management, present the situation where an application can be vulnerable to these web threats and finally provide preventative measures against them. ...

  1. Reactivity on the Web

    OpenAIRE

    Bailey, James; Bry, François; Eckert, Michael; Patrânjan, Paula Lavinia

    2005-01-01

    Reactivity, the ability to detect simple and composite events and respond in a timely manner, is an essential requirement in many present-day information systems. With the emergence of new, dynamic Web applications, reactivity on the Web is receiving increasing attention. Reactive Web-based systems need to detect and react not only to simple events but also to complex, real-life situations. This paper introduces XChange, a language for programming reactive behaviour on the Web,...

  2. Synthesis of Pd@Pt Core-shell Nanoparticles based on Photochemical Seed Growth Method and Co-reduction Method and the Electrocatalytic Performance

    Directory of Open Access Journals (Sweden)

    Li Shanshan

    2016-01-01

    Full Text Available A series of Pd@Pt nanoparticles were synthesized based on electrochemical seed growth method and co-reduction method in polyethylene-glycol and acetone solution system. The TEM/HR-TEM and XPS characterization proved that the prepared composite nanoparticles present core-shell structure and analyzed the chemical state of the particles. The electrocatalytic performance of Pd@Pt particles was studied by using the electrochemical workstation. The results showed that the Pd@Pt/C catalyst of different molar ratios of Pd to Pt exhibited preferable catalytic activity and stability for the methanol catalytic oxidation reaction. Among which, the Pd@Pt nanoparticles (Pd:Pt=1:1 prepared by co-reduction method, presented highest catalytic activity, which is 2 times higher than that of Pt/C catalyst. The high catalytic activity produced by the core-shell structure was briefly discussed.

  3. Architecture and the Web.

    Science.gov (United States)

    Money, William H.

    Instructors should be concerned with how to incorporate the World Wide Web into an information systems (IS) curriculum organized across three areas of knowledge: information technology, organizational and management concepts, and theory and development of systems. The Web fits broadly into the information technology component. For the Web to be…

  4. Semantic Web Primer

    NARCIS (Netherlands)

    Antoniou, Grigoris; Harmelen, Frank van

    2004-01-01

    The development of the Semantic Web, with machine-readable content, has the potential to revolutionize the World Wide Web and its use. A Semantic Web Primer provides an introduction and guide to this still emerging field, describing its key ideas, languages, and technologies. Suitable for use as a

  5. Evaluating Web Usability

    Science.gov (United States)

    Snider, Jean; Martin, Florence

    2012-01-01

    Web usability focuses on design elements and processes that make web pages easy to use. A website for college students was evaluated for underutilization. One-on-one testing, focus groups, web analytics, peer university review and marketing focus group and demographic data were utilized to conduct usability evaluation. The results indicated that…

  6. Web Search Engines

    OpenAIRE

    Rajashekar, TB

    1998-01-01

    The World Wide Web is emerging as an all-in-one information source. Tools for searching Web-based information include search engines, subject directories and meta search tools. We take a look at key features of these tools and suggest practical hints for effective Web searching.

  7. Classification of the web

    DEFF Research Database (Denmark)

    Mai, Jens Erik

    2004-01-01

    This paper discusses the challenges faced by investigations into the classification of the Web and outlines inquiries that are needed to use principles for bibliographic classification to construct classifications of the Web. This paper suggests that the classification of the Web meets challenges...... that call for inquiries into the theoretical foundation of bibliographic classification theory....

  8. Applicability of an innovative steroid-profiling method to determine synthetic growth promoter abuse in cattle

    NARCIS (Netherlands)

    Blokland, M.H.; Tricht, van E.F.; Ginkel, van L.A.; Sterk, S.S.

    2017-01-01

    A robust LC–MS/MS method was developed to quantify a large number of phase I and phase II steroids in urine. The decision limit is for most compounds lower than 1 ng ml−1 with a measurement uncertainty smaller than 30%. The method is fully validated and was applied to assess the influence of

  9. ECONOMETRIC METHODS AND MODELS USED IN THE ANALYSIS OF THE FACTORIAL INFLUENCE OF THE GROSS DOMESTIC PRODUCT GROWTH

    Directory of Open Access Journals (Sweden)

    Constantin ANGHELACHE

    2017-06-01

    Full Text Available Gross Domestic Product is the most representative synthetic indicator that expresses the evolution of the national economy. This macroeconomic indicator is used in the analysis of the level of the national economy, as well as the dynamic evolution of the national economy. In the forecast studies we rely on GDP evolution. In these situations, we might identify the factors of economic growth, and their influence. On the evolution of GDP have influence some factors: employees, labour productivity, the level of technology, investments and foreign direct investment, imports, exports or net exports, total consumption, and so on. We can analyze the data series and graphical representation. Detailed analysis is performed using econometric methods, parameters which express interdependence, meaning and intensity of correlation. Thus, we estimate the economic developments. The authors studied and proposed some econometric models for the analysis of economic growth/forecast. The novelty is that we adapt some econometric models to macroeconomic analysis.

  10. Box-scan: A novel 3DXRD method for studies of recrystallization and grain growth

    DEFF Research Database (Denmark)

    Lyckegaard, Allan; Poulsen, Henning Friis; Ludwig, Wolfgang

    2012-01-01

    Within the last decade a number of x-ray diffraction methods have been presented for non-destructive 3D characterization of polycrystalline materials. 3DXRD [1] and Diffraction Contrast Tomography [2,3,4] are examples of such methods providing full spatial and crystallographic information...... of the individual grains. Both methods rely on specially designed high-resolution near-field detectors for acquire the shape of the illuminated grains, and therefore the spatial resolution is for both methods limited by the resolution of the detector, currently ~2 micrometers. Applying these methods using...... for dynamic studies requiring high temporal resolution and set-ups involving bulky sample environments (e.g. furnaces, stress-rigs etc.)...

  11. Utilization of organic fertilizer to increase paddy growth and productivity using System of Rice Intensification (SRI method in saline soil

    Directory of Open Access Journals (Sweden)

    V . O . Subardja

    2016-01-01

    Full Text Available Soil salinity has negative effect on soil biodiversity as well as microbial activities. Hence, rice growth also effected by salinity. Application of organic fertilizer and adoption of System of Rice Intensification (SRI cultivation might improve the (biological soil properties and increase rice yield. The aim of this study was to evaluate the effect of two different rice cultivation methods namely conventional rice cultivation method and System of Rice Intensification (SRI rice cultivation method and two kinds organic fertilizer on improvement of soil biological properties and rice yield. In this study, a split plot experimental design was applied where rice cultivation method (conventional and SRI was the main plot and two kinds of organic fertilizer (market waste and rice straw was the sub plot. The treatments had four replicates. The results showed that SRI cultivation with market waste organic fertilizer could increase soil biological properties (population of microbe, fungi and soil respiration. The same treatment also increased rice growth and production. Combination of SRI and market waste organic fertilizer yielded the highest rice production (7.21 t/ha.

  12. Numerical Simulation of Yttrium Aluminum Garnet(YAG) Single Crystal Growth by Resistance Heating Czochralski(CZ) Method

    Energy Technology Data Exchange (ETDEWEB)

    You, Myeong Hyeon; Cha, Pil Ryung [Kookmin University, Seoul (Korea, Republic of)

    2017-01-15

    Yttrium Aluminum Garnet (YAG) single crystal has received much attention as the high power solid-state laser’s key component in industrial and medical applications. Various growth methods have been proposed, and currently the induction-heating Czochralski (IHCZ) growth method is mainly used to grow YAG single crystal. Due to the intrinsic properties of the IHCZ method, however, the solid/liquid interface has a downward convex shape and a sharp tip at the center, which causes a core defect and reduces productivity. To produce YAG single crystals with both excellent quality and higher yield, it is essential to control the core defects. In this study, using computer simulations we demonstrate that the resistance-heating CZ (RHCZ) method may avoid a downward convex interface and produce core defect free YAG single crystal. We studied the effects of various design parameters on the interface shape and found that there was an optimum combination of design parameter and operating conditions that produced a flat solid-liquid interface.

  13. Remote sensing change detection methods to track deforestation and growth in threatened rainforests in Madre de Dios, Peru

    Science.gov (United States)

    Shermeyer, Jacob S.; Haack, Barry N.

    2015-01-01

    Two forestry-change detection methods are described, compared, and contrasted for estimating deforestation and growth in threatened forests in southern Peru from 2000 to 2010. The methods used in this study rely on freely available data, including atmospherically corrected Landsat 5 Thematic Mapper and Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation continuous fields (VCF). The two methods include a conventional supervised signature extraction method and a unique self-calibrating method called MODIS VCF guided forest/nonforest (FNF) masking. The process chain for each of these methods includes a threshold classification of MODIS VCF, training data or signature extraction, signature evaluation, k-nearest neighbor classification, analyst-guided reclassification, and postclassification image differencing to generate forest change maps. Comparisons of all methods were based on an accuracy assessment using 500 validation pixels. Results of this accuracy assessment indicate that FNF masking had a 5% higher overall accuracy and was superior to conventional supervised classification when estimating forest change. Both methods succeeded in classifying persistently forested and nonforested areas, and both had limitations when classifying forest change.

  14. Growth and characterization of magnesium chloride and lanthanum chloride doped strontium tartrate crystals - gel method

    International Nuclear Information System (INIS)

    Kalaiarasi, S.; Jaikumar, D.

    2014-01-01

    Growth of single crystals of doped strontium tartrate by controlled diffusion of strontium chloride into the silica gel charged with tartaric acid at room temperature is narrated. In this study, we synthesized magnesium chloride (5% and 10%) doped strontium tartrate crystals and Lanthanum chloride (5%, 10% and 15%) doped strontium tartrate crystals are grown. The crystal structure of the compound crystals was confirmed by single crystal X-ray diffraction. The Fourier transform infrared spectrum of pure and doped crystals are recorded and analyzed. The UV-Vis-NIR spectrum analysis reveals that the optical study of the grown crystals. The second harmonic generation efficiency was measured by using Kurtz powder technique with Nd:YAG laser of wavelength 1064 nm. (author)

  15. Development of an aptamer-based affinity purification method for vascular endothelial growth factor

    Directory of Open Access Journals (Sweden)

    Maren Lönne

    2015-12-01

    Full Text Available Since aptamers bind their targets with high affinity and specificity, they are promising alternative ligands in protein affinity purification. As aptamers are chemically synthesized oligonucleotides, they can be easily produced in large quantities regarding GMP conditions allowing their application in protein production for therapeutic purposes. Several advantages of aptamers compared to antibodies are described in general within this paper. Here, an aptamer directed against the human Vascular Endothelial Growth Factor (VEGF was used as affinity ligand for establishing a purification platform for VEGF in small scale. The aptamer was covalently immobilized on magnetic beads in a controlled orientation resulting in a functional active affinity matrix. Target binding was optimized by introduction of spacer molecules and variation of aptamer density. Further, salt-induced target elution was demonstrated as well as VEGF purification from a complex protein mixture proving the specificity of protein-aptamer binding.

  16. Thermal transport during the growth of crystalline fibers by the laser-heated float zone method

    International Nuclear Information System (INIS)

    Feigelson, R.S.

    1990-01-01

    Single crystal fibers may someday prove useful in a variety of advanced device applications. At the current time, fibers for optical, superconducting, and structural applications are under investigation. The advantage of single crystal fibers for optical devices lies in the enhanced light guiding properties one can obtain compared to a bulk crystal of the same material. Potential fiber-optic applications include optical transmission lines for remote temperature sensing and spectroscopy, solid-state lasers and amplifiers, and nonlinear devices such as harmonic generators, Raman shifters and optical parameters oscillators. In the area of superconductivity, the potential for producing long flexible fibers of the Bi 2 Sr 2 CaCu 2 O 8 high temperature superconductor which are capable of carrying high electrical current has been demonstrated. This superconductor, like other high T c materials is incongruently melting and growth rates (fiber throughput), therefore, have to be reduced to optimize the superconducting properties. Interest in single crystal fibers for structural applications stems from a strong technological interest in high strength, light weight fiber-matrix composites capable of operating at elevated temperatures. The very high crystalline perfection possible in single crystal fibers of certain materials, for example Al 2 O 3 , make them very attractive for special high temperature structural applications. Single crystal fibers are noted for having greater lower defects and hence higher strength than comparable bulk crystals. For most of the fiber applications mentioned above, stringent requirements exist for uniform diameter, homogeneous composition, and a low density of crystalline defects. Excellent growth stability is needed to obtain such fibers

  17. Kyropoulos method for growth of nonlinear optical organic crystal ABP (4-aminobenzophenone) from the melt

    Science.gov (United States)

    Pan, Shoukui; Okano, Y.; Tsunekawa, S.; Fukuda, T.

    1993-03-01

    The Kyropoulus method was used to grow nonlinear optical organic crystals ABP (4-aminobenzophenone). The crystals were characterized by nonlinear optical measurements and had a large effect of frequency doubling.

  18. Development of growth rate measuring method for intracellular, parasitic acid-fast bacteria using radioisotopes

    International Nuclear Information System (INIS)

    Nakata, Noboru; Fukutomi, Yasuo

    1998-01-01

    To prevent and treat infections diseases caused by pathogenic acid-fast bacteria such as Mycobacterium leprae, Tubercle bacillus, it is important to elucidate the mechanisms of intracellular proliferations of these bacteria. This research project was started to make DNA library using a new constructed shuttle vector. Development of in vitro evaluation method for intracellular proliferation of mycobacterium and its transformed cells was attempted on the basis of Buddemeyer method. This method was able to precisely determine the metabolic activities as low as those in leprae and its modified method using 14 C-palmitic acid was highly sensitive and the results were obtainable in a shorter period. The generated CO 2 was satisfactorily absorbed into scintillator without using a filter paper. A new culture medium from which arginine, a NO-producing compound was eliminated was used to repress the sterilizing effects of NO, but the metabolic activities of leprae was not enhanced. (M.N.)

  19. Development of growth rate measuring method for intracellular, parasitic acid-fast bacteria using radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Nakata, Noboru; Fukutomi, Yasuo [National Inst. of Infectious Deseases, Tokyo (Japan)

    1998-02-01

    To prevent and treat infections diseases caused by pathogenic acid-fast bacteria such as Mycobacterium leprae, Tubercle bacillus, it is important to elucidate the mechanisms of intracellular proliferations of these bacteria. This research project was started to make DNA library using a new constructed shuttle vector. Development of in vitro evaluation method for intracellular proliferation of mycobacterium and its transformed cells was attempted on the basis of Buddemeyer method. This method was able to precisely determine the metabolic activities as low as those in leprae and its modified method using {sup 14}C-palmitic acid was highly sensitive and the results were obtainable in a shorter period. The generated CO{sub 2} was satisfactorily absorbed into scintillator without using a filter paper. A new culture medium from which arginine, a NO-producing compound was eliminated was used to repress the sterilizing effects of NO, but the metabolic activities of leprae was not enhanced. (M.N.)

  20. CMS Web-Based Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Badgett, William [Fermilab; Lopez-Perez, Juan Antonio [Fermilab; Maeshima, Kaori [Fermilab; Soha, Aron [Fermilab; Sulmanas, Balys [Fermilab; Wan, Zongru [Kansas State U.

    2010-01-01

    With the growth in size and complexity of High Energy Physics experiments, and the accompanying increase in the number of collaborators spread across the globe, the importance of widely relaying timely monitoring and status information has grown. To this end, we present online Web Based Monitoring solutions from the CMS experiment at CERN. The web tools developed present data to the user from many underlying heterogeneous sources, from real time messaging system to relational databases. We provide the power to combine and correlate data in both graphical and tabular formats of interest to the experimentalist, with data such as beam conditions, luminosity, trigger rates, detector conditions and many others, allowing for flexibility on the user side. We also present some examples of how this system has been used during CMS commissioning and early beam collision running at the Large Hadron Collider.

  1. Web services foundations

    CERN Document Server

    Bouguettaya, Athman; Daniel, Florian

    2013-01-01

    Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet.Web Services Foundations is the first installment of a two-book collection coverin

  2. Web Security, Privacy & Commerce

    CERN Document Server

    Garfinkel, Simson

    2011-01-01

    Since the first edition of this classic reference was published, World Wide Web use has exploded and e-commerce has become a daily part of business and personal life. As Web use has grown, so have the threats to our security and privacy--from credit card fraud to routine invasions of privacy by marketers to web site defacements to attacks that shut down popular web sites. Web Security, Privacy & Commerce goes behind the headlines, examines the major security risks facing us today, and explains how we can minimize them. It describes risks for Windows and Unix, Microsoft Internet Exp

  3. Cooperative Mobile Web Browsing

    DEFF Research Database (Denmark)

    Perrucci, GP; Fitzek, FHP; Zhang, Qi

    2009-01-01

    This paper advocates a novel approach for mobile web browsing based on cooperation among wireless devices within close proximity operating in a cellular environment. In the actual state of the art, mobile phones can access the web using different cellular technologies. However, the supported data......-range links can then be used for cooperative mobile web browsing. By implementing the cooperative web browsing on commercial mobile phones, it will be shown that better performance is achieved in terms of increased data rate and therefore reduced access times, resulting in a significantly enhanced web...

  4. WebGIS based on semantic grid model and web services

    Science.gov (United States)

    Zhang, WangFei; Yue, CaiRong; Gao, JianGuo

    2009-10-01

    As the combination point of the network technology and GIS technology, WebGIS has got the fast development in recent years. With the restriction of Web and the characteristics of GIS, traditional WebGIS has some prominent problems existing in development. For example, it can't accomplish the interoperability of heterogeneous spatial databases; it can't accomplish the data access of cross-platform. With the appearance of Web Service and Grid technology, there appeared great change in field of WebGIS. Web Service provided an interface which can give information of different site the ability of data sharing and inter communication. The goal of Grid technology was to make the internet to a large and super computer, with this computer we can efficiently implement the overall sharing of computing resources, storage resource, data resource, information resource, knowledge resources and experts resources. But to WebGIS, we only implement the physically connection of data and information and these is far from the enough. Because of the different understanding of the world, following different professional regulations, different policies and different habits, the experts in different field will get different end when they observed the same geographic phenomenon and the semantic heterogeneity produced. Since these there are large differences to the same concept in different field. If we use the WebGIS without considering of the semantic heterogeneity, we will answer the questions users proposed wrongly or we can't answer the questions users proposed. To solve this problem, this paper put forward and experienced an effective method of combing semantic grid and Web Services technology to develop WebGIS. In this paper, we studied the method to construct ontology and the method to combine Grid technology and Web Services and with the detailed analysis of computing characteristics and application model in the distribution of data, we designed the WebGIS query system driven by

  5. Growth Rates of Microbes in the Oceans.

    Science.gov (United States)

    Kirchman, David L

    2016-01-01

    A microbe's growth rate helps to set its ecological success and its contribution to food web dynamics and biogeochemical processes. Growth rates at the community level are constrained by biomass and trophic interactions among bacteria, phytoplankton, and their grazers. Phytoplankton growth rates are approximately 1 d(-1), whereas most heterotrophic bacteria grow slowly, close to 0.1 d(-1); only a few taxa can grow ten times as fast. Data from 16S rRNA and other approaches are used to speculate about the growth rate and the life history strategy of SAR11, the most abundant clade of heterotrophic bacteria in the oceans. These strategies are also explored using genomic data. Although the methods and data are imperfect, the available data can be used to set limits on growth rates and thus on the timescale for changes in the composition and structure of microbial communities.

  6. QoS management of web services

    CERN Document Server

    Zheng, Zibin

    2013-01-01

    Quality-of-Service (QoS) is normally used to describe the non-functional characteristics of Web services and as a criterion for evaluating different Web services. QoS Management of Web Services presents an innovative QoS evaluation framework for these services. Moreover, three QoS prediction methods and two methods for creating fault-tolerant Web services are also proposed in this book. It not only provides the latest research findings, but also presents an excellent overview of the QoS management of Web services, making it a valuable resource for researchers and graduate students in service computing.   Zibin Zheng is an associate research fellow at the Shenzhen Research Institute, the Chinese University of Hong Kong, China. Professor Michael R. Lyu also works at the same institute.

  7. Web server for priority ordered multimedia services

    Science.gov (United States)

    Celenk, Mehmet; Godavari, Rakesh K.; Vetnes, Vermund

    2001-10-01

    In this work, our aim is to provide finer priority levels in the design of a general-purpose Web multimedia server with provisions of the CM services. The type of services provided include reading/writing a web page, downloading/uploading an audio/video stream, navigating the Web through browsing, and interactive video teleconferencing. The selected priority encoding levels for such operations follow the order of admin read/write, hot page CM and Web multicasting, CM read, Web read, CM write and Web write. Hot pages are the most requested CM streams (e.g., the newest movies, video clips, and HDTV channels) and Web pages (e.g., portal pages of the commercial Internet search engines). Maintaining a list of these hot Web pages and CM streams in a content addressable buffer enables a server to multicast hot streams with lower latency and higher system throughput. Cold Web pages and CM streams are treated as regular Web and CM requests. Interactive CM operations such as pause (P), resume (R), fast-forward (FF), and rewind (RW) have to be executed without allocation of extra resources. The proposed multimedia server model is a part of the distributed network with load balancing schedulers. The SM is connected to an integrated disk scheduler (IDS), which supervises an allocated disk manager. The IDS follows the same priority handling as the SM, and implements a SCAN disk-scheduling method for an improved disk access and a higher throughput. Different disks are used for the Web and CM services in order to meet the QoS requirements of CM services. The IDS ouput is forwarded to an Integrated Transmission Scheduler (ITS). The ITS creates a priority ordered buffering of the retrieved Web pages and CM data streams that are fed into an auto regressive moving average (ARMA) based traffic shaping circuitry before being transmitted through the network.

  8. Effect of Recruitment Methods on Response Rate in a Web-Based Study for Primary Care Physicians: Factorial Randomized Controlled Trial.

    Science.gov (United States)

    So, Ryuhei; Shinohara, Kiyomi; Aoki, Takuya; Tsujimoto, Yasushi; Suganuma, Aya M; Furukawa, Toshi A

    2018-02-08

    Low participation rates are one of the most serious disadvantages of Web-based studies. It is necessary to develop effective strategies to improve participation rates to obtain sufficient data. The objective of this trial was to investigate the effect of emphasizing the incentive in the subject line of the invitation email and the day of the week of sending the invitation email on the participation rate in a Web-based trial. We conducted a 2×2 factorial design randomized controlled trial. We contacted 2000 primary care physicians from members of the Japan Primary Care Association in January 2017 and randomly allocated them to 1 of 4 combinations of 2 subject lines (presence or absence of an emphasis on a lottery for an Amazon gift card worth 3000 yen or approximately US $30) and 2 delivery days (sending the invitation email on Tuesday or Friday). The primary outcome was the response rate defined as the number of participants answering the first page of the questionnaire divided by the number of invitation emails delivered. All outcomes were collected between January 17, 2017, and February 8, 2017. We analyzed data from 1943 out of 2000 participants after excluding those whose email addresses were invalid. The overall response rate was 6.3% (123/1943). There was no significant difference in the response rates between the 2 groups regarding incentive in the subject line: the risk ratio was 1.12 (95% CI 0.80 to 1.58) and the risk difference was 0.7% (95% CI -1.5% to 2.9%). Similarly, there was no significant difference in the response rates between the 2 groups regarding sending the email on Tuesday or Friday: the risk ratio was 0.98 (95% CI 0.70 to 1.38) and the risk difference was -0.1% (95% CI -2.3% to 2.1%). Neither emphasizing the incentive in the subject line of the invitation email nor varying the day of the week the invitation email was sent led to a meaningful increase in response rates in a Web-based trial with primary care physicians. University Hospital

  9. A web-based survey of the relationship between buddhist religious practices, health, and psychological characteristics: research methods and preliminary results.

    Science.gov (United States)

    Wiist, W H; Sullivan, B M; Wayment, H A; Warren, M

    2010-03-01

    A Web-based survey was conducted to study the religious and health practices, medical history and psychological characteristics among Buddhist practitioners. This report describes the development, advertisement, administration and preliminary results of the survey. Over 1200 Buddhist practitioners responded. Electronic advertisements were the most effective means of recruiting participants. Survey participants were mostly well educated with high incomes and white. Participants engaged in Buddhist practices such as meditation, attending meetings and obtaining instruction from a monk or nun, and practiced healthful behaviors such as regular physical activity and not smoking. Buddhist meditative practice was related to psychological mindfulness and general health.

  10. Influence of the growth parameters on TiO2 thin films deposited using the MOCVD method

    Directory of Open Access Journals (Sweden)

    Bernardi M. I. B.

    2002-01-01

    Full Text Available In this work we report the synthesis of TiO2 thin films by the Organometallic Chemical Vapor Deposition (MOCVD method. The influence of deposition parameters used during the growth in the obtained structural characteristics was studied. Different temperatures of the organometallic bath, deposition time, temperature and type of the substrate were combined. Using Scanning Electron Microscopy associated to Electron Dispersive X-Ray Spectroscopy, Atomic Force Microscopy and X-ray Diffraction, the strong influence of these parameters in the thin films final microstructure was verified.

  11. Effects of different soil remediation methods on inhibition of lead absorption and growth and quality of Dianthus superbus L.

    Science.gov (United States)

    Yang, Xiaoyu; Ma, Siyue; Li, Jianheng

    2017-12-01

    Heavy metal pollution in soil poses a serious threat to the growth of plants used in traditional Chinese medicine. Therefore, a pot experiment was conducted to study the effects of various soil remediation methods on the performance of Herba Dianthi (Dianthus superbus L.) grown on Pb-contaminated soil. The results show that inoculation of Herba Dianthi with arbuscular mycorrhizal fungi (AMF) led to a significant reduction in Pb uptake (P< 0.05), and increased root development and root-to-shoot ratio compared to untreated control plants, along with the highest content of active components. When planting with Trifolium repens, the reduction effect of Pb absorption was insignificant. Herba Dianthi showed improved growth and active ingredients, and the lowest Pb content, with AMF inoculation. The addition of EDTA decreased the growth of Herba Dianthi, but promoted the absorption of Pb. The inhibition of tumor cells was highest in E2. In conclusion, inoculation with AMF can ensure that plant lead content meets testing standards, helping to improve the quality of medicinal herbs.

  12. A kinetic Monte Carlo simulation method of van der Waals epitaxy for atomistic nucleation-growth processes of transition metal dichalcogenides.

    Science.gov (United States)

    Nie, Yifan; Liang, Chaoping; Cha, Pil-Ryung; Colombo, Luigi; Wallace, Robert M; Cho, Kyeongjae

    2017-06-07

    Controlled growth of crystalline solids is critical for device applications, and atomistic modeling methods have been developed for bulk crystalline solids. Kinetic Monte Carlo (KMC) simulation method provides detailed atomic scale processes during a solid growth over realistic time scales, but its application to the growth modeling of van der Waals (vdW) heterostructures has not yet been developed. Specifically, the growth of single-layered transition metal dichalcogenides (TMDs) is currently facing tremendous challenges, and a detailed understanding based on KMC simulations would provide critical guidance to enable controlled growth of vdW heterostructures. In this work, a KMC simulation method is developed for the growth modeling on the vdW epitaxy of TMDs. The KMC method has introduced full material parameters for TMDs in bottom-up synthesis: metal and chalcogen adsorption/desorption/diffusion on substrate and grown TMD surface, TMD stacking sequence, chalcogen/metal ratio, flake edge diffusion and vacancy diffusion. The KMC processes result in multiple kinetic behaviors associated with various growth behaviors observed in experiments. Different phenomena observed during vdW epitaxy process are analysed in terms of complex competitions among multiple kinetic processes. The KMC method is used in the investigation and prediction of growth mechanisms, which provide qualitative suggestions to guide experimental study.

  13. Modelling the growth of ZnO thin films by PVD methods and the effects of post-annealing.

    Science.gov (United States)

    Blackwell, Sabrina; Smith, Roger; Kenny, Steven D; Walls, John M; Sanz-Navarro, Carlos F

    2013-04-03

    Results are presented for modelling of the evaporation and magnetron sputter deposition of Zn(x)O(y) onto an O-terminated ZnO (0001¯) wurtzite surface. Growth was simulated through a combination of molecular dynamics (MD) and an on-the-fly kinetic Monte Carlo (otf-KMC) method, which finds diffusion pathways and barriers without prior knowledge of transitions. We examine the effects of varying experimental parameters, such as substrate bias, distribution of the deposition species and annealing temperature. It was found when comparing evaporation and sputtering growth that the latter process results in a denser and more crystalline structure, due to the higher deposition energy of the arriving species. The evaporation growth also exhibits more stacking faults than the sputtered growth. Post-annealing at 770 K did not allow complete recrystallization, resulting in films which still had stacking faults where monolayers formed in the zinc blende phase, whereas annealing at 920 K enabled the complete recrystallization of some films to the wurtzite structure. At the latter temperature atoms could also sometimes be locked in the zinc blende phase after annealing. When full recrystallization did not take place, both wurtzite and zinc blende phases were seen in the same layer, resulting in a phase boundary. Investigation of the various distributions of deposition species showed that, during evaporation, the best quality film resulted from a stoichiometric distribution where only ZnO clusters were deposited. During sputtering, however, the best quality film resulted from a slightly O rich distribution. Two stoichiometric distributions, one involving mainly ZnO clusters and the other involving mainly single species, showed that the distribution of deposition species makes a huge impact on the grown film. The deposition of predominantly single species causes many more O atoms at the surface to be sputtered or reflected, resulting in an O deficiency of up to 18% in the

  14. Logging costs and cutting methods in young-growth ponderosa pine in California

    Science.gov (United States)

    Philip M. McDonald; William A. Atkinson; Dale O. Hall

    1969-01-01

    Mixed-conifer stands at the Challenge Experimental Forest, Calif., were cut to four specifications: seed-tree, group selection, single tree selection, and clearcut. Logging costs and production rates were compared and evaluated. Cutting method had little effect on felling or skidding production; felling ranged from 1,802 to 2,019 bd ft per hour, and skidding from 3,138...

  15. Instructors' Growth in TPACK: Teaching Technology-Infused Methods Courses to Preservice Teachers

    Science.gov (United States)

    Foulger, Teresa S.; Buss, Ray R.; Wetzel, Keith; Lindsey, LeeAnn

    2015-01-01

    We were concerned about teaching a stand-alone technology integration course while advocating that teachers employ full integration. Our college moved to a tech-infusion model whereby our educational technology curriculum would be incorporated in methods courses. Using a qualitative approach, we documented experiences of teacher educators who were…

  16. APPROACHES TO ANALYZE THE QUALITY OF ROMANIAN TOURISM WEB SITES

    Directory of Open Access Journals (Sweden)

    Lacurezeanu Ramona

    2013-07-01

    The purpose of our work is to analyze travel web-sites, more exactly, whether the criteria used to analyze virtual stores are also adequate for the Romanian tourism product. Following the study, we concluded that the Romanian online tourism web-sites for the Romanian market have the features that we found listed on similar web-sites of France, England, Germany, etc. In conclusion, online Romanian tourism can be considered one of the factors of economic growth.

  17. PANNZER2: a rapid functional annotation web server.

    Science.gov (United States)

    Törönen, Petri; Medlar, Alan; Holm, Liisa

    2018-05-08

    The unprecedented growth of high-throughput sequencing has led to an ever-widening annotation gap in protein databases. While computational prediction methods are available to make up the shortfall, a majority of public web servers are hindered by practical limitations and poor performance. Here, we introduce PANNZER2 (Protein ANNotation with Z-scoRE), a fast functional annotation web server that provides both Gene Ontology (GO) annotations and free text description predictions. PANNZER2 uses SANSparallel to perform high-performance homology searches, making bulk annotation based on sequence similarity practical. PANNZER2 can output GO annotations from multiple scoring functions, enabling users to see which predictions are robust across predictors. Finally, PANNZER2 predictions scored within the top 10 methods for molecular function and biological process in the CAFA2 NK-full benchmark. The PANNZER2 web server is updated on a monthly schedule and is accessible at http://ekhidna2.biocenter.helsinki.fi/sanspanz/. The source code is available under the GNU Public Licence v3.

  18. An efficient and reproducible method for improving growth of a soil alga (Chlorococcum infusionum) for toxicity assays.

    Science.gov (United States)

    Nam, Sun-Hwa; An, Youn-Joo

    2015-12-01

    This study evaluated five methods of soil inoculation using the soil alga Chlorococcum infusionum to determine the most efficient and reproducible method for promoting the growth of soil algae for toxicity testing. The five techniques included application of C. infusionum in a circle on top of the soil, to a central spot on top of the soil, to a central spot in the subsoil, to one side on top of the soil, and application divided between a circle and a central spot on top of the soil. Of these, the first method generated the greatest amount of chlorophyll fluorescence and was the method with the best reproducibility. We evaluated the applicability of this method in an assessment of the toxicity of copper and nickel to C. infusionum in two representative standard soils. Copper (20-75 mg/kg for OECD soil and 20-60 mg/kg Lufa 2.2 soil) and nickel (400-500 mg/kg for OECD soil and 60-100 mg/kg Lufa 2.2 soil) reduced the chlorophyll fluorescence of C. infusionum when the inoculation was delivered in a circle on top of both soil types. To our knowledge, this is the first study to assess the suitability of different soil algal inoculation methods for terrestrial toxicity testing. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Incentives to Encourage Scientific Web Contribution (Invited)

    Science.gov (United States)

    Antunes, A. K.

    2010-12-01

    We suggest improvements to citation standards and creation of remuneration opportunities to encourage career scientist contributions to Web2.0 and social media science channels. At present, agencies want to accomplish better outreach and engagement with no funding, while scientists sacrifice their personal time to contribute to web and social media sites. Securing active participation by scientists requires career recognition of the value scientists provide to web knowledge bases and to the general public. One primary mechanism to encourage participation is citation standards, which let a contributor improve their reputation in a quantifiable way. But such standards must be recognized by their scientific and workplace communities. Using case studies such as the acceptance of web in the workplace and the growth of open access journals, we examine what agencies and individual can do as well as the time scales needed to secure increased active contribution by scientists. We also discuss ways to jumpstart this process.

  20. Low temperature and self catalytic growth of ultrafine ITO nanowires by electron beam evaporation method and their optical and electrical properties

    International Nuclear Information System (INIS)

    Kumar, R. Rakesh; Rao, K. Narasimha; Rajanna, K.; Phani, A.R.

    2014-01-01

    Highlights: • ITO nanowires were grown by e-beam evaporation method. • ITO nanowires growth done at low substrate temperature of 350 °C. • Nanowires growth was carried out without use of catalyst and reactive oxygen gas. • Nanowires growth proceeds via self catalytic VLS growth. • Grown nanowires have diameter 10–20 nm and length 1–4 μm long. • ITO nanowire films have shown good antireflection property. - Abstract: We report the self catalytic growth of Sn-doped indium oxide (ITO) nanowires (NWs) over a large area glass and silicon substrates by electron beam evaporation method at low substrate temperatures of 250–400 °C. The ITO NWs growth was carried out without using an additional reactive oxygen gas and a metal catalyst particle. Ultrafine diameter (∼10–15 nm) and micron long ITO NWs growth was observed in a temperature window of 300–400 °C. Transmission electron microscope studies confirmed single crystalline nature of the NWs and energy dispersive spectroscopy studies on the NWs confirmed that the NWs growth proceeds via self catalytic vapor-liquid-solid (VLS) growth mechanism. ITO nanowire films grown on glass substrates at a substrate temperature of 300–400 °C have shown ∼2–6% reflection and ∼70–85% transmission in the visible region. Effect of deposition parameters was systematically investigated. The large area growth of ITO nanowire films would find potential applications in the optoelectronic devices