WorldWideScience

Sample records for waves energies renouvelables

  1. Renewables | Energies renouvelables

    Directory of Open Access Journals (Sweden)

    2012-05-01

    Full Text Available World Energy Generated for Commercial Use by Type*Production mondiale d’énergie destinée à des applications commerciales, par type*­Main ProducersPrincipaux producteurs* Renewables also include biomass, yet most of it is used for energy generation for non-commercial purposes. | Les énergies renouvelables incluent la biomasse, mais celle-ci sert essentiellement à générer de l’énergie qui ne rentre pas dans les circuits commerciaux.Source: British Petroleum, BP Statistical Review of World Energ...

  2. Clean energy, renewable energies; Energie propre, energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    This document is the compilation of the 4 issues of the 'energie propre - energie renouvelables' newsletter published by the regional energy agency of Provence-Alpes-Cote d'Azur region (ARENE). Each issue is a technical file presenting a particular facility or installation: the pico-hydraulic power plant of the Allos lake (Mercantour, French Alps), the 'Chute de la Guerche' and 'Chute de Chastillon' hydraulic power plant exploited by the Isola town; the pico-hydraulic power plant of the drinkable water network of Hameau des Agnielles village, the direct solar thermal floor. (J.S.)

  3. The renewable energies; Les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The renewable energies are everywhere but also irregular. Thus they need savings in our energy consumptions. This document provides information, such as economics, capacity and implementation, on the following renewable energies: the wind power, the solar energy, the photovoltaic energy, the biogas, the geothermal energy, the hydroelectricity, the wood. It also presents a state of the art and examples of bio-climatic architecture. (A.L.B.)

  4. Offshore renewable energies, offshore wind power marine currents and waves; Energies renouvelables en mer eolien en mer courants marins et vagues

    Energy Technology Data Exchange (ETDEWEB)

    Paillard, M. [Institut Francais de Recherche pour l' Exploitation de la Mer, 92 - Issy les Moulineaux (France); Peirano, E. [Agence de Environnement et de la Maitrise de l' Energie (ADEME), 06 - Valbonne (France)

    2004-07-01

    This colloquium aims to take stock on the development of ocean energies, mainly exploitation of offshore wind energy, but also exploitation of marine currents and waves for energy conversion by discussing their perspectives, their constraints, and their environmental and socio-economic impacts. It proposes also a review the recent methodological and technological advances. The different subjects introduced are: state of the art and prospects; resource assessments, forecasting and short-term prediction, site conditions; technical assessments, installation,decommissioning, certification; environmental impacts, social aspects and acceptability; policies, market perspectives and constraints; project developments and feedback. (A.L.B.)

  5. Energies alternatives, énergies renouvelables, énergies vertes

    OpenAIRE

    André Fontana

    2013-01-01

    Après avoir brossé le paysage énergétique du monde et de l’Europe, et compte tenu de la volonté de nombreux états de voter un moratoire pour la poursuite du nucléaire, les atouts des énergies alternatives et renouvelables sont passées en revue.

  6. Renewable energy in Africa; Les energies renouvelables en Afrique

    Energy Technology Data Exchange (ETDEWEB)

    Karekezi, S.; Kimani, J.; Wambile, A. [African Energy Policy Research Network, Nairobi (Kenya)

    2007-04-15

    Africa's vast renewable energy sources have been used with variable success rates. Although the area has potential for hydro, geothermal, biomass, solar and wind energy, these energy sources have not been largely exploited due to a lack of political interest and a lack of investment. Some of these renewable energy sources can meet part of the energy needs of African countries while offering additional advantages, such as decreasing air pollution at the local and regional levels. Development of renewable energy sources requires less capital than conventional energy systems. Renewable energy also provides clean energy to individuals and enterprises. However, the lack of promotion of renewable energy in Africa can be attributed to problems linked to poverty and to the already low greenhouse gas emissions in Africa. According to decision makers in Africa, arguments that favour the use of renewable energy for the purpose of environmental protection must be based on solid empirical facts regarding increasing oil prices; advantages of renewable energy; or, the reduction of risks associated with shortages of hydroelectricity during periods of drought. Other considerations that favour the use of renewable energy include job creation, energy consumption in the agroalimentary and forestry sectors, indoor air quality, and energy source development in rural areas, particularly for hospitals, schools and mission centres. This article commented on various types of renewable energy sources, such as hydro, solar, wind, biomass, and geothermal energy sources. Also, it explained which renewable energy sources have succeeded in Africa, and which types have less chance of succeeding. The obstacles encountered in the development and use of renewable energy sources in Africa were also discussed with reference to political, financial and human obstacles. The short and long term priorities were also addressed. It was concluded that certain types of renewable energies can reduce risks

  7. The wood, renewable energy; Le bois, energie renouvelable

    Energy Technology Data Exchange (ETDEWEB)

    Acket, C

    2006-12-15

    This document evaluates the french forest situation and its future. Indeed, the wood energy constitutes in France the first renewable energy after the hydraulic. It presents the today situation of the french forest providing statistical data, evaluation of the energy estimation, the carbon fixation, the resources, the perspectives wood energy for 2050, the biofuels and an economic analysis. (A.L.B.)

  8. Renewable energies, alternative or complement?; Energie renouvelables, alternative ou complement?

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-01

    This meeting deals with the place of the renewable energies in the future. Many subjects were discussed during this meeting: the renewable energies part in in the heating systems and in the bio-fuels, the development of the solar and the wind power energies, the choice of a sector to assist, the renewable energies and the economic development. The full texts of the presentations are provided. (A.L.B.)

  9. Renewable energies and public policies; Energies renouvelables et politiques publiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This report presents the full texts of the allocution delivered during the colloquium on the renewable energies and the public policies. It takes stock on the strategical environment and the political will of the renewable energies, the tracks of development in France and the necessity of a law on the renewable energies. (A.L.B.)

  10. Study 4: the renewable energies; Etude 4: les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Roc, G. [Total Fina, 92 - Paris La Defense (France)

    2000-07-01

    In 1986 the Brundtlandt Commission formalized the durable development concept and defined in these terms: satisfy the today needs without mortgage the future generation capacity to satisfy their own needs. This concept leads to give an interest in the development of new energies sources and in the abatement of the environmental pollution. For each following energies sources, the author takes stock of the state of the art, the technological and political stakes at an international scale: the bio-fuels, the wood energy, the photovoltaic, the solar energy and the geothermal energy. (A.L.B.)

  11. Renewable energies and public policies; Energies renouvelables et politiques publiques

    Energy Technology Data Exchange (ETDEWEB)

    Cochet, Y. [Ministere de l' Amenagement du Territoire et de l' Environnement, 75 - Paris (France); Pierret, Ch. [Ministere de l' Industrie, 75 - Paris (France); Lienemann, M.N. [Ministere de l' Urbanisme, du Logement et des Transports, 75 - Paris (France)

    2002-04-01

    This document presents the interventions of political personalities on the topic of the renewable energies development policies and the necessity of financial incentives which have been discussed during the colloquium of thursday 4 april 2002 at Paris. (A.L.B.)

  12. Les sources d'energie renouvelables dans la production d'electricite ...

    African Journals Online (AJOL)

    alimentation de quelques autres villages par des pays voisins, ont incitées nos autorités a investir dans les sources renouvelables dans le cadre de stratégie de développement durable énergétique, bien qu'une coopération européenne dans ce ...

  13. The renewable energies in France 1970-2003; Les energies renouvelables en France 1970-2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-01-01

    This report aims to present series of energy production by renewable energies (hydroelectric power, wind power, photovoltaic, geothermal energy, biomass and domestic wastes) and thermal energy production by renewable energies (wood, domestic wastes, heat pumps, geothermal energy, biogas, solar energy, biofuels) in order to estimate the evolution of the energy policy. (A.L.B.)

  14. Renewable energies it is time to go; Energies renouvelables a vous d'agir

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-06-15

    After the presentation of the allocutions, offered by ministries and specialists, the questions and answers of the conference are detailed. It concerns the political aspects of the renewable energies part in the energy policy, the energy consumption and the energy efficiency, the local policies and the renewable energies in the life, architecture and urban areas. (A.L.B.)

  15. The renewable energies in France 1970-2005; Les energies renouvelables en France 1970-2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-06-15

    This document provides statistical data on the renewable energies situation in France (metropolitan and overseas department) from 1970 to 2005. It concerns 1- the electric power production from renewable energies as the hydroelectric power, wind power, photovoltaic, geothermal energy and biomass and 2- the thermal power production from renewable energies as the wood energy, domestic wastes, heat pumps, geothermal energy, crops residues, biogas, thermal solar and biofuels. (A.L.B.)

  16. Renewable energies in France 1970-2002; Energies renouvelables en France 1970-2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-02-01

    The energy observatory presents in this 2004 edition today data concerning the thermal renewable energies and the new energetic accounting method for the electric renewable energies. The following energy sources are concerned: hydroelectric power, wind power, photovoltaic, geothermal energy, biomass, wood fuels, domestic wastes, heat pumps, biogas, the thermal solar and biofuels. The energy production by renewable sources from 1970 to 2002, is also provided. (A.L.B.)

  17. INSTITUT DE RECHERCHE DES ENERGIES RENOUVELABLES A TLEMCEN « énergie solaire »

    OpenAIRE

    BOUMEDIENE, Hayat; TEKIA, Sarah

    2015-01-01

    L’indépendance énergétique, couplée à la diminution des émissions de gaz à effet de serre et la volonté de diversifier des ressources énergétiques permet de valoriser et d’exploiter les énergies alternatives. De ce fait, les énergies renouvelables représentent une alternative écologique aux combustibles fossiles, elles ont toutes l’immense avantage d’être d’origines naturelles, inépuisables, non polluantes et très adaptées à la production décentralisée. Les divers types d’énergies renouvelabl...

  18. 2005: risks and opportunities for the renewable energies; 2005: risques et opportunites pour les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-15

    This press conference takes stock on the renewable energies in the world at the date of the first of february 2005. A first part presents the renewable energies activities in the world, and then more specially in France, the 2001 directive on the development of the electric power from renewable sources, the controversy around the public service charges due to the renewable energies and the fiscal advantages proposed. The second part details each renewable energies sources situation, cost, capacity: photovoltaic, wind energy, hydroelectricity, thermal solar energy, wood energy, biofuels and heat pumps. (A.L.B.)

  19. A survey of renewable energies in France; Panorama des energies renouvelables en France

    Energy Technology Data Exchange (ETDEWEB)

    Bal, J.L. [Syndicat des energies renouvelables, 75 - Paris (France)

    2011-05-15

    One of the goals set by the Grenelle agreement was to reach a ratio of 23% for the part of renewable energies in the final energies consumed in France by 2020. In 2005 this ratio was 10 per cent. In this article the situation in 2010 for wind energy, solar energy, biomass, wood heating and geothermal energy are reported. It appears that the results are promising but the reduction of fiscal incentives might jeopardize the objective for 2020. (A.C.)

  20. The renewable energies: a topical issue; Les energies renouvelables: un sujet d'actualite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-01

    This document analyzes the situation of the renewable energies in the french energy sector. The first part presents the part of the renewable energies in the energy production and consumption, their interest in the fight against the climatic change and in the employment creation. The second part details for each renewable energy source the government policy in favor their development and the legislative framework. The third part provides data on cost, CO{sub 2} emissions, life cycle and employments to illustrate the analysis. The last part presents the government objectives of the renewable energies development for 2010. (A.L.B.)

  1. The renewable energies: the landscape; Les energies renouvelables: un tour d'horizon

    Energy Technology Data Exchange (ETDEWEB)

    Acket, C.; Bacher, P

    2005-03-15

    If one takes into account the hydroelectric power, the France is the first european country in the renewable energies domain. The position is also honorable concerning the wood energy. Meanwhile, for the solar and wind energy, France is late. To discuss this debate, the authors bring together today data on the renewable energies, offer some proposals for the next 50 years taking into account the reduction of greenhouse gases emission for 2050. (A.L.B.)

  2. Disadvantages for the renewable energies; Course a handicap pour les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    If on the whole the Europe the renewable energies expand, some countries remain hesitant in their project of development. The author takes stock on the energy policies of some european countries and the investments to develop these clean energies. (A.L.B.)

  3. The renewable energies have the wind aft; Les energies renouvelables ont le vent en poupe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-20

    This document brings together four papers on the future of the renewable energies. It shows the market development hopeful the enterprises demand and the enjoy of the economy for these green energies, way of greenhouse gases control. A special interest is given to the solar and wind energies and to the fuel cells. (A.L.B.)

  4. Renewable energy from vegetation; Les energies renouvelables d'origine vegetale

    Energy Technology Data Exchange (ETDEWEB)

    Sales, C. [Centre francais de cooperation international en recherche agronomique pour le developpement (France)

    2009-07-15

    Currently, vegetation accounts for 3 major types of energy sources, notably woody biomass, starches and vegetable oils. Bio-ethanol and biodiesel is produced from the fermentation of starches, such as sugar cane, beet sugar, sorghum, corn and potatoes. Biofuels can be produced from palm tree oil, coconut oil , soya oil, sunflower oil or any type of vegetable based oil. This article discussed energy efficiency issues and the environmental impact of developing these energies. In general, the lower energy efficiency of the starches can be attributed to the enzymes responsible for the catalysis. The article also reviewed the thermochemistry and energy efficiency regarding second generation fuels. It also discussed the burning of biomass, including woody biomass, forest waste and agricultural waste. 1 ref., 2 figs.

  5. Renewable energies and national development; Energies renouvelables et amenagement du territoire

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This document brings together the communications presented at this colloquium on renewable energy sources and the debates that took place during the round-tables. The aim of the colloquium was to take stock of the present day situation of the development of renewable energies in France, to share experiences and to discuss the conditions of implementation and development of renewable energies in particular in accommodations and tertiary buildings (solar thermal and photovoltaic) and in collective services (wood-fuel, cogeneration units, bio-automotive fuels, geothermal energy and biogas). One round table was devoted to the electricity produced from renewable energy sources (hydro- and wind power, cogeneration units, photovoltaic) and to the problem of connection of decentralized power generation units to the national grid (tariffs, legal aspects, administrative procedures) in the new context of deregulation of electricity markets. (J.S.)

  6. Project of european directive on the renewable energies; Projet de directive europeenne sur les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Bacher, P

    2008-01-15

    The project of directive is a legislative adaptation of the ''road map of the renewable energies'' presented by the Ministers Council Commission the 10 January 2007. Meanwhile, this approach does not take into account the final objectives, the reduction of the CO{sub 2} and the fuels importation. The author aims to discuss the project. He shows how the text is exclusively centered on the renewable energies, the lack of guarantee that the objectives will be reach, the lack of criteria to determine the % of renewable energies by country and the lack of an approach cost-benefit. (A.L.B.)

  7. Renewable energies. France wakes up; Energies renouvelables. La France se reveille

    Energy Technology Data Exchange (ETDEWEB)

    Lepetit, V

    2007-02-15

    Boosted by incentive measures and by the collective awareness about climatic change, the renewable energy sources are developing over the French territory. This segment, in deficit in the past is finally becoming profitable thanks to important subsidies. Wind power and solar energy represent the main potentialities in France, in particular the photovoltaic projects in the residential sector. However, todays the offer cannot follow the demand. (J.S.)

  8. Local investment in renewable energies; Investissement local dans les energies renouvelables - depliant d'information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-11-01

    Although the vast majority of renewable energies projects are established by commercial developers, some of them are financed by ''ordinary citizens'' pooling together through different schemes. This is particularly frequent in Denmark and Germany, possibly a key reason for the continuous and so successful growth of various renewable energies sources in these countries. This guideline aims to define the term of local investment and provides examples of development and recommendations. (A.L.B.)

  9. Renewable energies: France does well; Energies renouvelables: la France fait ses preuves

    Energy Technology Data Exchange (ETDEWEB)

    Chesnais, L

    2006-08-15

    In France, renewable energy resources can rely on important governmental development programs. 17 million petroleum equivalent tonnes (Mtep) were produced in 2005 which puts France in the top European countries for the use of renewable energies. Hydro-electricity can still progress in French overseas territories where there are potentialities for big and small units, an increase in the production capacity ranging from 200 and 1000 MW is expected by january 2007. Wind energy keeps on developing. On the first january 2006, 132 wind farms were operating totaling a power output of 737 MW. Numerous projects are under construction, an increase of the wind energy capacity ranging between 2000 MW and 6000 MW is expected by 2007. In France the contribution of biomass to the mix of renewable energies is the most important: 12.2 Mtep (in 2004) and it can be broken up into: 9.2 Mtep for wood, 2.6 Mtep for energy recovery from wastes and 0.4 Mtep for bio-fuels. (A.C.)

  10. Local investment in renewable energies; Investissement local dans les Energies Renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Grepmeier, K.; Larsen, J.; Manolakaki, E.; Quantin, J.; Twele, J

    2003-07-01

    This document presents european examples on the interest of the local investment, illustrated by cases studies in Germany, Denmark and Switzerland. Two main points were discussed: the financial tools and the french strategy. The colloquium provided many discussions and analyzes on the possibility of significant contribution to the collective efforts in favor of the public involvement in the renewable energies development in Europe. (A.L.B.)

  11. The local investment in renewable energies; L'investissement local dans les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Poussard, E.; Quantin, J.; Grepmeier, K.; Larsen, J.; Manolakaki, E.; Twele, J

    2003-07-01

    These proceedings present some European testimonies about the advantage of local investment, illustrated with concrete cases taken in Germany, Denmark and Switzerland. They demonstrate that local investment in renewable energy sources is a reality and that this practice has indisputably contributed to their significant development in some countries of the European Union. The sustain of foreign banks to the financing of renewable energy sources is at the evidence an example to follow up in countries like France, Greece or Spain. Important efforts have to be made to simplify and encourage the implementation of projects, in particular from the administrative point of view. Beyond the financial aspects, the colloquium has shown that these practices of citizenship involvement represent an important factor of social adaptation and acceptation. The projects, gathering local actors but also the overall citizens through common investment funds, ensure a better territorial anchoring and a sustain to local and sustainable development. This document has been published with the support of the European Commission and ADEME (French Agency for Environment and Energy Management). (J.S.)

  12. Tidal energy, a renewable energy within hand reach; Les marees, une energie renouvelable a portee de lune

    Energy Technology Data Exchange (ETDEWEB)

    Danielo, O.

    2011-06-15

    Tide energy and oceanic current energy represent a strong potentiality for a few countries in the world including France. In the domain of tidal energy there are 2 strategies. The first one is based on the search for the lowest power production cost in order to contribute efficiently to the country's energy mix. Generally this strategy leads to the construction of tidal dams. The second strategy is based on the search for the lowest environmental impact. This strategy is economically competitive only in places where electrical power is expensive like isolated islands. This strategy is illustrated by the tidal power station of the Alderney island. In fact the amount of energy delivered by a tidal power station depends on the rise of the tide and on the surface of the dam. It appears that tidal dams require less surface that hydroelectric power plants. The energy of oceanic currents like Gulf Stream or the thermal energy of oceans or wave power are very little exploited now but represent a potentiality higher by several orders of magnitude than tidal energy. (A.C.)

  13. Energy and durable development: the place of the renewable energies; Energie et developpement durable: la place des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The 29 may 2000, took place at the UNESCO, a colloquium on the place of the renewable energies facing the economic development. This document presents the opening presentation of A. Antolini and L. Jospin and the colloquium papers and debates in the following four domains: the energy challenges of the durable development, the renewable energies sources facing the european directive, the thermal renewable energies (solar, geothermics and biomass) and the greenhouse effect, the world market of the renewable energies. (A.L.B.)

  14. The wind energy, a clean and renewable energy; L'energie eolienne, une energie propre et renouvelable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Facing the context of greenhouse gases reduction, the France began a national program of fight against the climatic change, in which the development of the renewable energies plays a major part. Among the renewable energy sources, the wind energy is the only one which is cheap and easily used. After a presentation of the leader of the wind energy in Europe (Germany, Spain and Denmark) and the position of the France, the document details the economical and environmental advantages of the wind energy, as the public opinion concerning this energy source. (A.L.B.)

  15. INTEGRATION DES ENERGIES RENOUVELABLE POUR UNE POLITIQUE ENERGETIQUE DURABLE A DJIBOUTI

    OpenAIRE

    Aye, Fouad

    2009-01-01

    Generally, the predictable exhaustion of the fossil fuels, the necessity of fighting against the global warming, the awareness for the protection of the environment and finally the consideration of the sustainable development in energy policies put the renewable energies in the heart of a strategic stake for the future of our planet. But for the Republic of Djibouti which currently knows an annual economic growth of 3,5 %, it is almost vital to exploit its potential in renewable energies to e...

  16. Centrales au gaz et Energies renouvelables: comparer des pommes avec des pommes

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark; Wiser, Ryan; Golove, William

    2003-10-20

    The fundamental conclusion that we draw from this analysis is that one should not to base itself blindly on forecasts prices of natural gas when one compare contracts at price fixes with producers of renewable energy with contracts at variable prices with promoters power stations with gas. Indeed, forecasts of the prices of gas do not succeed not to enter the associated costs with the covering of the risk, that they are connected to the negative pressure against the cover, with the CAPM, with costs of transaction or with unspecified combination of three. Thus, insofar as price stability to length term is developed, better way of comparing the two choices would be to have recourse to the data on the prices in the long term natural gas, and not with forecasts of the prices. During three last years at least, the use of these prices in the long term would have besides license to correct a methodological error who, obviously, seem to have supported unduly, and of relatively important way, power stations with natural gas compared to their competitors of renewable energies.

  17. Renewable energies and energy choices. Summary of the colloquium; Energies renouvelables et choix energetiques. Compte rendu du colloque

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-01

    This document is an executive summary of the colloquium organized by the French syndicate of renewable energies (SER) which took place at the Maison de l'UNESCO in Paris during the national debate on energies organized by the French government in spring 2003. The colloquium was organized around 6 round tables dealing with: the world perspectives and the environmental context of the contribution of renewable energies to the sustainable development (respect of Kyoto protocol commitments, contribution to the security of energy supplies, lack of large scale program of development of decentralized power generation in developing countries, lack of market tools linked with CO{sub 2} emissions, improvement of competitiveness); development of renewable energies in Europe (promotion and sustain in all European countries, obligation of supply and purchase, pricing regulation, European harmonization of practices); renewable electricity and its place in the new orientation law about energies (tariff/pluri-annual investment planing, administrative authorizations, connections to the grid, calls for offer, costs of the photovoltaic solar energy); contribution of renewable energies in the transportation sector (bio-fuels, low taxes, ethanol fuel cells, vegetal chemistry); renewable heat and integration of renewable energy sources in buildings (intelligent architecture, promotion, quality labels and standards, lack of CO{sub 2} penalties linked with fossil fuels, tax reduction for solar and wood fuel appliances, acknowledgment of geothermal heat pumps as renewable energy source); and the presentation of the first proposals for the future orientation law (balance between nuclear and renewable energy sources, integration in the local environment, competitiveness, use of market mechanisms, R and D etc.). (J.S.)

  18. The renewable energies in France: the main results in 2006; Les energies renouvelables en France: les principaux resultats en 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The main results presented in the renewable energies annual evaluation are discussed: the production of electricity from renewable energy sources, the thermal production from renewable energy sources, the consumption of thermal renewable energies and statistical data from 2004 to 2006 on the total primary energy, the hydroelectricity, the solar energy, the geothermal energy, the heat pump, the wood energy, the cogeneration, the biogas the wind energy and the biofuels. (A.L.B.)

  19. Energies renouvelables et territoires : les défis de la transition énergétique en Allemagne

    OpenAIRE

    Deshaies, Michel

    2015-01-01

    En décidant la sortie du nucléaire dès 2022 et à terme le remplacement de l’ensemble des énergies fossiles par des énergies renouvelables, l’Allemagne s’est lancée à elle-même un défi extraordinaire dans la mesure où la réalisation de cet objectif ne doit pas compromettre sa place de quatrième puissance industrielle du monde (Buchan, 2012). C’est précisément cette mutation du système énergétique qui est qualifiée de transition énergétique, Energiewende en allemand, un terme popularisé depuis ...

  20. The state of renewable energies in Europe. 11th EurObserv'ER report; Etat des energies renouvelables en Europe. 11e bilan EurObserv'ER

    Energy Technology Data Exchange (ETDEWEB)

    Civel, Y.B. (ed.)

    2012-02-15

    For over ten years now, eurobserv'eR has been collecting data on european Union renewable energy sources to describe the state and thrust of the various sectors in its thematic barometers. The first part of this assessment is an updated and completed summary of the work published in 2011. It provides a complete overview of the ten renewable sectors, supplemented by two summary notes on concentrated solar power and ocean energies. Their performances are compared against the european Commission White Paper and Biomass Action plan targets. The eurobserv'eR consortium members will publish their end-of-year estimates of the renewable energy share of overall final energy consumption for each European Union country from this edition onwards. These figures will thus provide preliminary indication of how the various countries are faring along their renewable energy paths and will ascertain whether their individual trends point to success in achieving their objectives [Dutch] Depuis plus de dix ans, eurobserv'er collecte des donnees sur les sources d'energies renouvelables de l'union europeenne afin de decrire, dans des barometres thematiques, l'etat et la dynamique des filieres. La premiere partie de cet ouvrage constitue une synthese des travaux publies en 2011, actualisee et completee. Elle offre un tour d'horizon complet des dix filieres renouvelables, completee par deux notes de synthese sur l'heliothermodynamique et l'energie marine. Ces filieres sont analysees a l'aide de differents indicateurs de types energetiques. leurs performances sont comparees aux objectifs du livre blanc de la Commission europeenne et de son plan d'action biomasse. a partir de cette edition, les membres du consortium eurobserv'er publieront chaque fin d'annee leurs estimations de la part des energies renouvelables dans la consommation brute d'energie finale pour chaque pays de l'union europeenne. Ces estimations

  1. The state of renewable energies in Europe. 10th EurObserv'ER report; Etat des energies renouvelables en Europe. 10e bilan EurObserv'ER

    Energy Technology Data Exchange (ETDEWEB)

    Civel, Y.B. (ed.)

    2011-01-15

    For over ten years now, eurobserv'eR has been collecting data on european Union renewable energy sources to describe the state and thrust of the various sectors in its thematic barometers. The first part of this assessment is an updated and completed summary of the work published in 2010. It provides a complete overview of the ten renewable sectors, supplemented by two summary notes on concentrated solar power and ocean energies. Their performances are compared against the european Commission White Paper and Biomass Action plan targets. The eurobserv'eR consortium members will publish their end-of-year estimates of the renewable energy share of overall final energy consumption for each European Union country from this edition onwards. These figures will thus provide preliminary indication of how the various countries are faring along their renewable energy paths and will ascertain whether their individual trends point to success in achieving their objectives. [Dutch] Depuis plus de dix ans, eurobserv'er collecte des donnees sur les sources d'energies renouvelables de l'union europeenne afin de decrire, dans des barometres thematiques, l'etat et la dynamique des filieres. La premiere partie de cet ouvrage constitue une synthese des travaux publies en 2010, actualisee et completee. Elle offre un tour d'horizon complet des dix filieres renouvelables, completee par deux notes de synthese sur l'heliothermodynamique et l'energie marine. Ces filieres sont analysees a l'aide de differents indicateurs de types energetiques. leurs performances sont comparees aux objectifs du livre blanc de la Commission europeenne et de son plan d'action biomasse. a partir de cette edition, les membres du consortium eurobserv'er publieront chaque fin d'annee leurs estimations de la part des energies renouvelables dans la consommation brute d'energie finale pour chaque pays de l'union europeenne. Ces estimations

  2. Efficient Wave Energy Amplification with Wave Reflectors

    OpenAIRE

    Kramer, Morten Mejlhede; Frigaard, Peter Bak

    2002-01-01

    Wave Energy Converters (WEC's) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased to approximately 130-140%. In the paper a procedure for calculating the efficiency and optimizing the geometry of wave reflectors are described, this by use of a 3D boundary element method. The calculations are verified ...

  3. The renewable energies sources in France 1970-2000; Les energies renouvelables en France 1970-2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The objective of this report is to describe the energy production from renewable sources in France since 1970. In France the rate of using renewable energy sources is unequal. Some of them as hydro energy show a confirmed industrial and commercial interest when other techniques have not still reach the same level of maturity. The renewable energy sources chosen to calculate the electric and thermal production of France are: for electric power, hydro energy, wind energy, solar energy, geothermal energy, the urban wastes, the wood wastes, the harvesting residues, the biogas. For the thermal production, the thermal solar energy, the geothermal energy, the urban wastes, the wood and wood wastes, the harvesting residues, the biogas and bio fuels. The figures are marked in thirty tables. (N.C.)

  4. The renewable energies: major tools for our development; Les energies renouvelables: des outils essentiels pour notre developpement

    Energy Technology Data Exchange (ETDEWEB)

    Antolini, A.

    2004-06-15

    Even if the fossil fuels use is always possible for the few ten years, the renewable energies will answer the new challenges of the society. In this framework the author takes stock on the greenhouse effect, the energy demand, the nuclear energy and on different renewable energies sources: the solar energy, the wind power, the biomass, the hydroelectricity, the cogeneration and the biofuels. (A.L.B.)

  5. Renewable energies: reality of the facts, data and stakes; Energies renouvelables: realite des faits, chiffres et enjeux

    Energy Technology Data Exchange (ETDEWEB)

    Antolini, A.

    2002-12-15

    Facing the public hostile declarations, this analysis takes stock on the renewable energies situation in France. It offers information and discusses the following topics: the french objectives, the real cost of the renewable energies, the french opinion, the market and the needed efforts, the contribution of the renewable energies to the greenhouse effect and the renewable energies as an employment source. (A.L.B.)

  6. Renewable energies, development, and environment: discourses, realities, and perspectives; Energies renouvelables, developpement et environnement. Discours, realites et perspectives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    After two contributions describing the context of renewable energies and their different objectives and roles in the North and in the South, a set of contributions discusses some controversies and generally accepted ideas about renewable energies: fossil energy appraisal and the greenhouse effect of presently used fuels, the issue of irregularity and climate hazards, photovoltaic energy as a development key for South countries, vulnerability of energy systems, renewable energies and energy market privatisation. The next set of contributions deals with different examples: renewable energies in Africa, electricity and high dams, small hydro developments in China, wind energy in Morocco, solar water-heaters in Tunisia, bio-energies and food security, second generation bio-fuels, biomass energy in Cambodia. Sheets are then proposed with a brief historical overview, a description of the state of the art, an indication of the installed power, of market shares, and a brief discussion of perspectives for the different renewable energy sources: large and small hydro, photovoltaic, thermodynamic solar, wind, geothermal, thermal solar, bio-fuels, biomass, and biogas

  7. European conferences. Integration of renewable energies in buildings; Conferences europeennes. Integration des energies renouvelables dans le batiment

    Energy Technology Data Exchange (ETDEWEB)

    Bal, J.L. [ADEME, Agence de l' Environnement et de la Maitrise de l' Energie, 75 - Paris (France); Letz, T. [Asder, 73 - Saint Alban Leysse (France); Tuille, F. [Observ' er, 75 - Paris (France)] [and others

    2001-07-01

    This document comprises 2 parts. First part is a detailed program of the exhibition with a press dossier which presents the different topics discussed during conferences and round tables, the market of renewable energies, and a list of agencies and companies involved in renewable energies development and products. The second part is the abstracts of the lectures presented during the European conferences on the integration of renewable energies in buildings (solar-thermal and photovoltaic systems, wood fuel and biomass). (J.S.)

  8. Local investment in renewable energies - European experiences; Investissement local dans les energies renouvelables - recueil d'experiences europeennes

    Energy Technology Data Exchange (ETDEWEB)

    Quantin, J.; Grepmeier, K.; Larsen, J.; Manolakaki, E.; Smith, M

    2004-01-01

    This booklet is realized within the framework of the european commission called PREDAC. This document have been conceived by a working group specialized on the local investment into renewable energies thematic. The objectives of this project are: to promote citizen participation in the financing of renewable energies projects in Europe; to make organizations, investor clubs and local government to be aware of this way of implication into renewable energies development; to examine more especially three renewable energy sources: biomass, photovoltaic and wind in Denmark, France, Germany, Greece and United Kingdom. (author)

  9. The Wave Energy Sector

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter

    2017-01-01

    shaped by the development, research, and teaching that we have carried out at the Wave Energy Research Group at Aalborg University over the past decades. It is our belief and experience that it would be useful writing and compiling such a handbook in order to enhance the understanding of the sector......This Handbook for Ocean Wave Energy aims at providing a guide into the field of ocean wave energy utilization. The handbook offers a concise yet comprehensive overview of the main aspects and disciplines involved in the development of wave energy converters (WECs). The idea for the book has been...

  10. Renewable energies: 75000 new employments for 2010; Energies renouvelables: un gisement de 75000 emplois nouveaux d'ici 2010

    Energy Technology Data Exchange (ETDEWEB)

    Antolini, A.

    2005-03-15

    The employment creation is one more trump for the renewable energies. This paper presents a sectoral analysis of the opportunity for the employment concerning the wind power, the wood industry, the biofuels industry, the solar energy, the biogas, the hydroelectricity and the geothermal industry. (A.L.B.)

  11. The Wave Energy Device

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter; Tedd, James William

    2006-01-01

    The Wave Dragon is a 4 to 11 MW offshore wave energy converter of the overtopping type. It basically consists of two wave reflectors focusing the waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power......'s first offshore wave energy converter. During this period an extensive measuring program has established the background for optimal design of the structure and regulation of the power take off system. Planning for full scale deployment of a 7 MW unit within the next 2 years is in progress. The prototype...

  12. Renewable energies in France: the main results in 2007; Les energies renouvelables en France: les principaux resultats en 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This document is a status for the year 2007 of the production and consumption of renewable energies in France. This status allows to follow and measure the advance the programs sustained by the public authorities for the use and valorization of renewable energy sources. The production includes the power generation (hydraulic, wind, solar and biofuel power plants) and the heat generation (heat pumps, biofuels and refuse fuels). The consumption concerns only the heat generation and is analyzed by sector of use. Statistical production data are summarized in tables. (J.S.)

  13. Causal bond graphs for renewable energy systems (part 1); Graphes de liens causaux pour systemes a energie renouvelable (partie 1)

    Energy Technology Data Exchange (ETDEWEB)

    Roboam, X. [Centre National de la Recherche Scientifique (CNRS), Lab. d' Electrotechnique et d' Electronique Industrielle (LEEI), Groupe Energie Electrique et Systemique, 31 - Toulouse (France); Astier, St. [Ecole Nationale Superieure d' Electrotechnique, d' Electronique, d' Informatique, d' Hydraulique et des Telecommunications (INP/ENSEEIHT), Groupe Energie Electrique et Systemique du LEEI, 31 - Toulouse (France); Foch, H.; Fontes, G.; Gandanegara, G.; Piquet, H.; Saisset, R.; Sareni, B.; Turpin, C. [Laboratoire d' Electrotechnique et d' Electronique Industrielle (LEEI), Groupe Energie Electrique et Systemique, 31 - Toulouse (France)

    2006-08-15

    Causal bond graphs is a methodology used for the unifying representation of power exchanges in macroscopic and energetic systems. It offers a very structured graphical vision of the cause-effect relations between the different elements of the system for the building up of models. This article deals with the use of causal bond graphs for the design of power conversion or storage devices used in renewable energy systems (static converters, electromechanical converters, electrochemical converters). (J.S.)

  14. Causal bond graphs for renewable energy systems (part 2); Graphes de liens causaux pour systemes a energie renouvelable (partie 2)

    Energy Technology Data Exchange (ETDEWEB)

    Roboam, X. [Centre National de la Recherche Scientifique (CNRS), Lab. d' Electrotechnique et d' Electronique Industrielle (LEEI), Groupe Energie Electrique et Systemique, 31 - Toulouse (France); Astier, St. [Ecole Nationale Superieure d' Electrotechnique, d' Electronique, d' Informatique, d' Hydraulique et des Telecommunications (INP/ENSEEIHT), Groupe Energie Electrique et Systemique du LEEI, 31 - Toulouse (France); Foch, H.; Fontes, G.; Gandanegara, G.; Piquet, H.; Saisset, R.; Sareni, B.; Turpin, C. [Laboratoire d' Electrotechnique et d' Electronique Industrielle (LEEI), Groupe Energie Electrique et Systemique, 31 - Toulouse (France)

    2006-08-15

    Causal bond graphs is a methodology used for the unifying representation of power exchanges in macroscopic and energetic systems. It offers a very structured graphical vision of the cause-effect relations between the different elements of the system for the building up of models. This article treats more particularly of generators and renewable energy systems (photovoltaic and wind power generators, solar vehicle) with some examples allowing to concretize the approach and implementation of the bond graph tool in designing. (J.S.)

  15. Cycloidal Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Stefan G. Siegel, Ph.D.

    2012-11-30

    This program allowed further advancing the development of a novel type of wave energy converter, a Cycloidal Wave Energy Converter or CycWEC. A CycWEC consists of one or more hydrofoils rotating around a central shaft, and operates fully submerged beneath the water surface. It operates under feedback control sensing the incoming waves, and converts wave power to shaft power directly without any intermediate power take off system. Previous research consisting of numerical simulations and two dimensional small 1:300 scale wave flume experiments had indicated wave cancellation efficiencies beyond 95%. The present work was centered on construction and testing of a 1:10 scale model and conducting two testing campaigns in a three dimensional wave basin. These experiments allowed for the first time for direct measurement of electrical power generated as well as the interaction of the CycWEC in a three dimensional environment. The Atargis team successfully conducted two testing campaigns at the Texas A&M Offshore Technology Research Center and was able to demonstrate electricity generation. In addition, three dimensional wave diffraction results show the ability to achieve wave focusing, thus increasing the amount of wave power that can be extracted beyond what was expected from earlier two dimensional investigations. Numerical results showed wave cancellation efficiencies for irregular waves to be on par with results for regular waves over a wide range of wave lengths. Using the results from previous simulations and experiments a full scale prototype was designed and its performance in a North Atlantic wave climate of average 30kW/m of wave crest was estimated. A full scale WEC with a blade span of 150m will deliver a design power of 5MW at an estimated levelized cost of energy (LCOE) in the range of 10-17 US cents per kWh. Based on the new results achieved in the 1:10 scale experiments these estimates appear conservative and the likely performance at full scale will

  16. SSG Wave Energy Converter

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Vicinanza, Diego; Frigaard, Peter

    2008-01-01

    The SSG (Sea Slot-cone Generator) is a wave energy converter of the overtopping type. The structure consists of a number of reservoirs one on the top of each others above the mean water level, in which the water of incoming waves is stored temporary. In each reservoir, expressively designed low...... head hydroturbines are converting the potential energy of the stored water into power. A key to success for the SSG will be the low cost of the structure and its robustness. The construction of the pilot plant is scheduled and this paper aims to describe the concept of the SSG wave energy converter...... and the studies behind the process that leads to its construction. The pilot plant is an on-shore full scale module in 3 levels with an expected power production of 320 MWh/y in the North Sea. Location, wave climate and laboratory tests results will be used here to describe the pilot plant and its characteristics....

  17. Efficient Wave Energy Amplification with Wave Reflectors

    DEFF Research Database (Denmark)

    Kramer, Morten Mejlhede; Frigaard, Peter Bak

    2002-01-01

    Wave Energy Converters (WEC's) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased to approximately 130......-140%. In the paper a procedure for calculating the efficiency and optimizing the geometry of wave reflectors are described, this by use of a 3D boundary element method. The calculations are verified by laboratory experiments and a very good agreement is found. The paper gives estimates of possible power benifit...... for different geometries of the wave reflectors and optimal geometrical design parameters are specified. On this basis inventors of WEC's can evaluate whether a specific WEC possible could benefit from wave reflectors....

  18. Electromagnetic wave energy converter

    Science.gov (United States)

    Bailey, R. L. (Inventor)

    1973-01-01

    Electromagnetic wave energy is converted into electric power with an array of mutually insulated electromagnetic wave absorber elements each responsive to an electric field component of the wave as it impinges thereon. Each element includes a portion tapered in the direction of wave propagation to provide a relatively wideband response spectrum. Each element includes an output for deriving a voltage replica of the electric field variations intercepted by it. Adjacent elements are positioned relative to each other so that an electric field subsists between adjacent elements in response to the impinging wave. The electric field results in a voltage difference between adjacent elements that is fed to a rectifier to derive dc output power.

  19. Les énergies renouvelables.

    OpenAIRE

    Gautier, Henri

    2015-01-01

    Voici un livre très utile pour les béotiens qui voudraient aborder la thématique des énergies renouvelables comme introduction, mais également pour les analystes travaillant dans ce domaine comme manuel de référence. En effet, écrit par un praticien de l’énergie et un pédagogue des sciences physiques, cet ouvrage balaie le panel des énergies renouvelables actuellement disponibles en fournissant des indications techniques indispensables sur chaque solution énergétique et des repères utiles sur...

  20. A sustainable local energy policy. Into a renewable millennium; Politique energetique locale durable: vers un millenaire renouvelable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Renewable energy sources only contribute to a marginal extent to the energy balance of most European towns and cities. Many of them, however, have set ambitious targets for 2010 and have developed programmes to this end. During the seminar organised by Energie-Cites in Verona, around 200 people representing towns and cities from over 20 countries were able to present and exchange experience in all areas related to renewable energy: on practical projects and on their impact on local development, urban planning and employment. It is in towns and cities that energy consumption is the highest and that heat networks working on biomass and buildings equipped with thermal and photovoltaic solar collectors are to be found. Renewable energy has been increasingly gaining ground in urban areas over the last few years for the following reasons: cities are responsible for 80% of total energy consumption and therefore concentrate most of energy needs; the existence of heat networks in densely-populated areas is an incentive to use resources such as biomass or geothermal energy for producing heat or in CHP units; biogas from sewage plants or resulting from the biological treatment of waste is also an urban product; thermal solar systems can often be installed on roof tops to satisfy part of the needs in terms of hot water or space heating and the same applies to photovoltaic solar energy; even wind energy can be promoted, either directly or through green buying procedures. Sustainable urban development depends on the implementation of a sustainable local energy policy based on the involvement of local authorities in improving energy efficiency and developing the use of renewable energy sources in municipal energy supplies. Local development, employment, social integration, the quality of the air - all being major sources of concern for local decision-makers - are stimulated by the promotion of renewable energy sources. Cities are, on account of their size, capable of defining

  1. A today energy, the wind turbines. The renewable energies; Une energie dans l'air du temps, les eoliennes. Les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This sheet, devoted to the public, provides information on the wind power, the french policy facing the wind turbines development, the wind turbines impacts on the environment, the noise and the public health. It presents also the energy context and the economical aspects of this renewable energy. (A.L.B.)

  2. Handbook of Ocean Wave Energy

    DEFF Research Database (Denmark)

    This book offers a concise, practice-oriented reference-guide to the field of ocean wave energy. The ten chapters highlight the key rules of thumb, address all the main technical engineering aspects and describe in detail all the key aspects to be considered in the techno-economic assessment...... in the wave energy sector. •Offers a practice-oriented reference guide to the field of ocean wave energy •Presents an overview as well as a deeper insight into wave energy converters •Covers both the economic and engineering aspects related to ocean wave energy conversion...

  3. Interpretation of wave energy spectra

    National Research Council Canada - National Science Library

    Thompson, E.F

    1980-01-01

    Guidelines for interpreting nondirectional wave energy spectra and presented. A simple method is given for using the spectrum to estimate a significant height and period for each major wave train in most sea states...

  4. About the renewable and the seas energies in the United States; Apercus sur les energies renouvelables et l'energie des mers aux Etats-Unis

    Energy Technology Data Exchange (ETDEWEB)

    Jamet, Ph

    2006-07-01

    This report aims to bring some information on the regulations and the technologies in the United States in the domain of the seas energies. After a presentation of the different seas and renewable energies and the corresponding regulations in the United States, the author concludes of an energy in its infancy except for the offshore wind power where some big projects are implemented. (A.L.B.)

  5. Handbook of Ocean Wave Energy

    DEFF Research Database (Denmark)

    This book offers a concise, practice-oriented reference-guide to the field of ocean wave energy. The ten chapters highlight the key rules of thumb, address all the main technical engineering aspects and describe in detail all the key aspects to be considered in the techno-economic assessment...... of wave energy converters. Written in an easy-to-understand style, the book answers questions relevant to readers of different backgrounds, from developers, private and public investors, to students and researchers. It is thereby a valuable resource for both newcomers and experienced practitioners...... in the wave energy sector. •Offers a practice-oriented reference guide to the field of ocean wave energy •Presents an overview as well as a deeper insight into wave energy converters •Covers both the economic and engineering aspects related to ocean wave energy conversion...

  6. The SSG Wave Energy Converter

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Margheritini, Lucia; Kofoed, Jens Peter

    2012-01-01

    The Sea-wave Slot-cone Generator concept (SSG) is a Wave Energy Converter based on the wave overtopping principle utilizing several reservoirs placed on top of each other, in which the energy of the incoming wave will be stored as potential energy. The water captured in the reservoirs will then run...... through turbines for electricity production. The system utilizes a wide spectrum of different wave conditions by means of multiple reservoirs, located at different levels above the still water level. Thereby, it obtains a high overall efficiency and it can be suitable for shoreline and breakwater...... at the Svaaheia site (Norway), Port of Hanstholm (Denmark) and Port of Garibaldi (Oregon, USA). In the last-mentioned two projects, the Sea-wave Slot-cone Generator technology is integrated into outer harbor breakwater and jetty reconstruction projects. Comprehensive studies have been performed in the last years...

  7. Renewable energies: it is time to choose for the France; Energie renouvelables: la France a l'heure du choix

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This colloquium takes stock on the renewable energies situation in France. What is the renewable energies place in the today french energy policy and in the developing countries? It presents also the renewable energies possibilities facing of the climatic change, their economical and environmental impact, the french people opinion and demand and the legal aspects of the renewable energies implementation. (A.L.B.)

  8. Key Aspects of Wave Energy

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Nørgaard, Jørgen Harck

    2012-01-01

    Diversification of renewable energy sources is fundamental to ensure sustainability. In this contest, wave energy can provide a substantial contribution as soon as the sector breaks into the market. In order to accelerate shift from a technology to a market focus and reduce technical and non...... be used as a breakwater therefore providing a solid structure for harbor protection; the Wave Star can be used as a base for offshore wind and photovoltaic installation in the middle of the sea, realizing an hybrid renewable energy platform. It is the authors´ believe that taking wave energy devices......-technical risks, it is critical to provide comprehensive and reliable information on the technologies without neglecting attractive advantages. It is possible to underline a different key of lecture of wave energy performance by considering efficiency and power production as well as device versatility...

  9. Environment project: 50 measures for a development of the high environmental quality renewable energies; Grenelle Environnement: 50 mesures pour un developpement des energies renouvelables a haute qualite environnementale

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-11-15

    This document presents the 50 measures decided by the government to develop the renewable energies in France and reach the 20% of participation to the energy production in 2020. Some measures concern all the renewable energies, they deal with the regulation, the administrative procedures of the building, others are specific to each energy. (A.L.B.)

  10. The renewable energies state of the art and perspectives in Italy; Les energies renouvelables etat des lieux et perspectives en Italie

    Energy Technology Data Exchange (ETDEWEB)

    Jaouen, M.; Racault, C

    2005-06-15

    Renewable energies are inexhaustible energies, meanwhile not enough exploited. This document presents the technical description of the different renewable energies sources and their repartition in the european union. A special part is devoted to the italian situation to show the poor utilization of the renewable energies and the gap between the situation and the objectives of the White Book. (A.L.B.)

  11. What are the perspectives for the renewable energies in France towards 2010 and after; Quelles perspectives pour les energies renouvelables en France en 2010 et au-dela

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    In the framework of the renewable energies development in the context of sustainable development, the author wonders on the advantages and the disadvantages of those energies. Many criteria of success are discussed as the costs, the french electric power networks adaptation, the energy policy, the research programs on renewable energies and the international cooperation. (A.L.B.)

  12. Wave energy absorption by ducks

    DEFF Research Database (Denmark)

    Kurniawan, Adi

    2017-01-01

    We study the absorption of wave energy by a single and multiple cam-shaped bodies referred to as ducks. Numerical models are developed under the assumptions of linear theory. We consider wave absorption by a single duck as well as by two lines of ducks meeting at an angle....

  13. 2005: risks and opportunities for the renewable energies. Press document; 2005: risques et opportunites pour les energies renouvelables. Dossier de presse

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-01

    In this document the Syndicate of the Renewable Energies presents the economic situation of the renewable energies from foreign parts and from France. It takes stock also on the 2001 directive on the development of the electric power and shows how the renewable energies are wrongly said to generate taxes on the electric utilities. Each renewable energies sources are then detailed. (A.L.B.)

  14. Development of renewable energies in the building industry and in the industry in general; Developpement des energies renouvelable dans le batiment et l'industrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This third issue of the international DERBI conference has permitted to decipher the international actuality of renewable energies, to position the French national projects in this thriving context, and to discover the recent technological innovations. Californian companies were invited to this conference for a comparison of the policies in favor of renewable energy sources on both sides of the Atlantic ocean. This document gathers the transparencies presented at this conference and dealing with technologies, products, projects and realization in the following domains: solar cooling, biomass power plants, photovoltaic power plants and advances in photovoltaic engineering, solar thermal energy, thermodynamic solar power plants, architecture, renewable energies and the Eco-Building European project, biofuels, wood fuels, wind power and small wind power, geothermal energy. Presentations deal also with the financing of renewable energy projects, the competencies, employment and training, the numerical dimension, and the automation in the renewable energies domain. (J.S.)

  15. Renewable energy in urban areas. The future has already begun; Energies renouvelables en milieu urbain. Le futur, c'est deja maintenant

    Energy Technology Data Exchange (ETDEWEB)

    Magnin, G.

    1999-10-01

    Renewable energy is still often presented as the energy of tomorrow or the day after tomorrow. It is true: 6% of the European energy total is still too little. But, 6% is not something to be sneezed at either. The White Paper fixed the ambitious objective of 12% in 2010 and initiatives are flourishing. These initiatives are far from coming exclusively from the countryside, where local resources (biomass, small-scale hydro power, etc.) or space (wind energy) are to be found. Urban areas, which have to meet higher energy requirements, often have district heating working on biomass and geothermal energy, biogas produced from sewage treatment plants and used as bus fuel, building roofs fitted for thermal and photovoltaic solar collectors or rivers running through the city. Encouraging examples will be find in this special issue dedicated to ''renewable''. (author)

  16. Report on the present day situation and technical perspectives of renewable energies; Rapport sur l'etat actuel et les perspectives techniques des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Birraux, C.; Le Deaut, J.Y.

    2001-11-01

    This work, carried out by the parliamentary office for the evaluation of scientific and technological choices on request of the French National Assembly and Senate, takes stock of the present day situation and technical perspectives of development of renewable energy sources and of research needs of the French industry in this domain: 1 - renewable energies: key-technologies for the energy supply of developing countries and for a rational consumption in transportation systems and accommodations of developed countries (energies technically different from fossil or nuclear energies; fundamental energy sources for a developing world; different national goals in Europe depending on the available natural resources and on the political realities; a minor interest in France for the domestic power generation but a major interest for transports, residential and tertiary sectors and export); 2 - priority choices given to the French renewable energy resources: renewable electricity (photovoltaic, wind, biomass), thermal technologies (solar, geothermal, biomass); 3 - future policy: sustain of renewable electricity production with the revival of research, industry and technical cooperation. (J.S.)

  17. Does renewable energy in Spain still have wind in its sails?;En Espagne, les energies renouvelables ont-elles toujours le vent (et le soleil) en poupe?

    Energy Technology Data Exchange (ETDEWEB)

    Vial, Th. [Ambassade de France en Espagne, Chef de pole, Mission economique-Ubifrance (Spain); Molenat, G. [Ambassade de France en Espagne, Service pour la Science et la technologie (Spain)

    2009-11-15

    Spain is apparently contradictory. It figures among the European countries farthest from the Kyoto Protocol's objectives but is often cited as an example, even by President Obama, for its success in speeding up developments in renewable energy. Successes in solar and wind power have proven that Spanish industry can, with support from the state and within a decade, develop to become competitive internationally at the very time when climate change will be having repercussions on economic models and opening new markets. From this vantage point, big projects (like the Mediterranean Solar Plan or future European Union initiatives related to the Energy-Climate package) should stimulate the Spanish, who will probably soon be looking for European partners. Given its advantages in wind and solar energy, the country should be able to consolidate an efficient energy solution with a promising future, while reinforcing its particularly innovative industry. (authors)

  18. Renouvellement des eaux du fjord du Saguenay

    Science.gov (United States)

    Belzile, Melany

    Le fjord du Saguenay, localise dans la region subarctique de l'est du Canada, ala particularite d' etre connecte a un estuaire tres energetique plutot que directement a 1' ocean. L'embouchure du fjord est situee ala rencontre d'un chenal profond et d'un seuil de 20m de profondeur qui limite les echanges d'eau entre le fjord et l'estuaire du Saint-Laurent. Cependant, les grandes amplitudes de maree a son embouchure ont le potentiel d'entrainer des eaux denses du Saint-Laurent a l'interieur du fjord renouvelant ainsi les eaux des differents bassins. Dans le but d' a voir une meilleure comprehension de la dynamique et de la saisonnalite des renouvellements dans le bassin interne, deux mouillages y ont ete deployes pour recolter les premieres donnees de courant, sur toute la colonne d' eau et sur plusieurs mois, ainsi que des observations de temperature et de salinite a differentes profondeurs. L'un de ces mouillages n' a malheureusement pas pu etre analyse en detail dfi a la complexite de ses resultats et au manque de temps. Des profils ont ete recoltes le long de section transversales (transects), couvrant plusieurs saisons et plusieurs annees, ce qui a contribue a une meilleure comprehension de la distribution spatiale des masses d'eau dans le fjord. Les resultats montrent que ladynamique du fjord est plus complexe que ce qui avait ete precedemment presente dans la litterature. Un changement saisonnier abrupte dans la circulation du fjord a ete observe a la rni-fevrier. De plus, des renouvellements non-anticipes juste en-dessous de la thermohalocline (˜ 10 m de profondeur) ont ete observes entre la fin de 1' hiver et le milieu de 1' ete. En fonction des saisons, trois types de renouvellement peuvent etre observes : renouvellements profonds a l'automne et au debut de l'hiver suivis des renouvellements de sous-surface et enfin les renouvellements a des profondeurs intermediaires pendant l'ete. Le changement saisonnier abrupte observe au milieu de l'hiver ainsi que la

  19. The 'renewable' stakes of the national debate on energies; Les enjeux ''renouvelables'' du debat national sur les energies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    Renewable energies do not produce any additional greenhouse gas emissions and do not leed to the production of dangerous wastes. The facilities used for their valorization are easily dismantled at the end of their life, and they offer many advantages in terms of employment, local economy, decentralization and national development. Their main drawbacks concern the required land surfaces and the intermittency of their availability. This paper analyzes the feasibility and the medium- and long-term perspectives of development of renewable energies in France and in Europe: costs and conditions (decentralized production, public acceptability, competitiveness, investments, operating costs, international cooperation). (J.S.)

  20. The environmental policies which favour the renewable energies development; Les politiques environnementales d'incitation au developpement des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Menanteau, Ph.; Finon, D.; Lamy, M.L.

    2001-05-01

    Facing the climatic changes and the Europe policy of the renewable energies development, the authors wonder on the compared efficiency of the incentive tools. The study is theoretical with the presentation of the price and the quantity approaches, but also practical with concrete examples. It reveals the theoretical qualities of the green certificate approach. (A.L.B.)

  1. Direct Drive Wave Energy Buoy

    Energy Technology Data Exchange (ETDEWEB)

    Rhinefrank, Kenneth E. [Columbia Power Technologies, Inc.; Lenee-Bluhm, Pukha [Columbia Power Technologies, Inc.; Prudell, Joseph H. [Columbia Power Technologies, Inc.; Schacher, Alphonse A. [Columbia Power Technologies, Inc.; Hammagren, Erik J. [Columbia Power Technologies, Inc.; Zhang, Zhe [Columbia Power Technologies, Inc.

    2013-07-29

    The most prudent path to a full-scale design, build and deployment of a wave energy conversion (WEC) system involves establishment of validated numerical models using physical experiments in a methodical scaling program. This Project provides essential additional rounds of wave tank testing at 1:33 scale and ocean/bay testing at a 1:7 scale, necessary to validate numerical modeling that is essential to a utility-scale WEC design and associated certification.

  2. Hydrodynamic Performance of a Wave Energy Converter

    Science.gov (United States)

    Yang, Yingchen

    2010-11-01

    To harvest energy from ocean waves, a new wave energy converter (WEC) was proposed and tested in a wave tank. The WEC freely floats on the water surface and rides waves. It utilizes its wave-driven angular oscillation to convert the mechanical energy of waves into electricity. To gain the maximum possible angular oscillation of the WEC under specified wave conditions, both floatation of the WEC and wave interaction with the WEC play critical roles in a joint fashion. During the experiments, the submersion condition of the WEC and wave condition were varied. The results were analyzed in terms of the oscillation amplitude, stability, auto-orientation capability, and wave frequency dependency.

  3. Reliability of Wave Energy Converters

    DEFF Research Database (Denmark)

    Ambühl, Simon

    There are many different working principles for wave energy converters (WECs) which are used to produce electricity from waves. In order for WECs to become successful and more competitive to other renewable electricity sources, the consideration of the structural reliability of WECs is essential...... WEPTOS. Calibration of safety factors are performed for welded structures at theWavestar device including different control systems for harvesting energy from waves. In addition, a case study of different O&M strategies for WECs is discussed, and an example of reliability-based structural optimization....... Structural reliability considerations and optimizations impact operation and maintenance (O&M) costs as well as the initial investment costs. Furthermore, there is a control system for WEC applications which defines the harvested energy but also the loads onto the structure. Therefore, extreme loads but also...

  4. Reliability of Wave Energy Converters

    DEFF Research Database (Denmark)

    Ambühl, Simon

    There are many different working principles for wave energy converters (WECs) which are used to produce electricity from waves. In order for WECs tobecome successful and more competitive to other renewable electricity sources,the consideration of the structural reliability of WECs is essential...... for welded structures at the Wavestar device includingdifferent control systems for harvesting energy from waves. In addition, a casestudy of different O&M strategies for WECs is discussed, and an example ofreliability-based structural optimization of the Wavestar foundation ispresented. The work performed.......Structural reliability considerations and optimizations impact operation andmaintenance (O&M) costs as well as the initial investment costs.Furthermore, there is a control system for WEC applications which defines theharvested energy but also the loads onto the structure. Therefore, extremeloads but also fatigue loads...

  5. Handbook of ocean wave energy

    CERN Document Server

    Kofoed, Jens

    2017-01-01

    This book is open access under a CC BY-NC 2.5 license. This book offers a concise, practice-oriented reference-guide to the field of ocean wave energy. The ten chapters highlight the key rules of thumb, address all the main technical engineering aspects and describe in detail all the key aspects to be considered in the techno-economic assessment of wave energy converters. Written in an easy-to-understand style, the book answers questions relevant to readers of different backgrounds, from developers, private and public investors, to students and researchers. It is thereby a valuable resource for both newcomers and experienced practitioners in the wave energy sector.

  6. Direct Drive Wave Energy Buoy

    Energy Technology Data Exchange (ETDEWEB)

    Rhinefrank, Kenneth [Columbia Power Technologies, Inc., Charlottesville, VA (United States); Lamb, Bradford [Columbia Power Technologies, Inc., Charlottesville, VA (United States); Prudell, Joseph [Columbia Power Technologies, Inc., Charlottesville, VA (United States); Hammagren, Erik [Columbia Power Technologies, Inc., Charlottesville, VA (United States); Lenee-Bluhm, Pukha [Columbia Power Technologies, Inc., Charlottesville, VA (United States)

    2016-08-22

    This Project aims to satisfy objectives of the DOE’s Water Power Program by completing a system detailed design (SDD) and other important activities in the first phase of a utility-scale grid-connected ocean wave energy demonstration. In early 2012, Columbia Power (CPwr) had determined that further cost and performance optimization was necessary in order to commercialize its StingRAY wave energy converter (WEC). CPwr’s progress toward commercialization, and the requisite technology development path, were focused on transitioning toward a commercial-scale demonstration. This path required significant investment to be successful, and the justification for this investment required improved annual energy production (AEP) and lower capital costs. Engineering solutions were developed to address these technical and cost challenges, incorporated into a proposal to the US Department of Energy (DOE), and then adapted to form the technical content and statement of project objectives of the resulting Project (DE-EE0005930). Through Project cost-sharing and technical collaboration between DOE and CPwr, and technical collaboration with Oregon State University (OSU), National Renewable Energy Lab (NREL) and other Project partners, we have demonstrated experimentally that these conceptual improvements have merit and made significant progress towards a certified WEC system design at a selected and contracted deployment site at the Wave Energy Test Site (WETS) at the Marine Corps Base in Oahu, HI (MCBH).

  7. Key features of wave energy.

    Science.gov (United States)

    Rainey, R C T

    2012-01-28

    For a weak point source or dipole, or a small body operating as either, we show that the power from a wave energy converter (WEC) is the product of the particle velocity in the waves, and the wave force (suitably defined). There is a thus a strong analogy with a wind or tidal turbine, where the power is the product of the fluid velocity through the turbine, and the force on it. As a first approximation, the cost of a structure is controlled by the force it has to carry, which governs its strength, and the distance it has to be carried, which governs its size. Thus, WECs are at a disadvantage compared with wind and tidal turbines because the fluid velocities are lower, and hence the forces are higher. On the other hand, the distances involved are lower. As with turbines, the implication is also that a WEC must make the most of its force-carrying ability-ideally, to carry its maximum force all the time, the '100% sweating WEC'. It must be able to limit the wave force on it in larger waves, ultimately becoming near-transparent to them in the survival condition-just like a turbine in extreme conditions, which can stop and feather its blades. A turbine of any force rating can achieve its maximum force in low wind speeds, if its diameter is sufficiently large. This is not possible with a simple monopole or dipole WEC, however, because of the 'nλ/2π' capture width limits. To achieve reasonable 'sweating' in typical wave climates, the force is limited to about 1 MN for a monopole device, or 2 MN for a dipole. The conclusion is that the future of wave energy is in devices that are not simple monopoles or dipoles, but multi-body devices or other shapes equivalent to arrays.

  8. Energy and tourist buildings 10 actions for the energy conservation and to use the renewable energies; Energie et etablisssements touristiques 10 actions pour economiser l'energie et utiliser les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    These actions proposed to the people working in the tourism industry, aims to reduce the energy consumption and use the renewable energies. They concern the heating (insulation of walls and glasses, wood heating), the solar protection, the lighting systems, the energy efficiency appliances, the water consumption, the solar water heating, the heating control. For each ten proposed actions, two indicators allow to evaluate their environmental and economic interest, and the implementing problems. (A.L.B.)

  9. Wave-to-wire Modelling of Wave Energy Converters

    DEFF Research Database (Denmark)

    Ferri, Francesco

    and non-technical issues. These can be efficiently summarised in the cost of the energy produced by the various wave energy converters: If compared with other renewable energy technologies the cost of energy from the ocean waves is still significantly higher. Holding the comparison it also important...... to noticed that there is not a clear front runner in the wave energy sector, which fades effort and funding over a too broad frame. In order to assist efficient development and analysis of wave energy converters and therefore to accelerate the sector progression towards commercialisation, a generally......, but talking about renewable energy partially ravels the problem out. Wave energy is a large, mostly untapped, renewable energy resource. It has the potential to contribute significantly to the future energy mix, but the sector has not yet rolled off into the market in consequence of a number of technical...

  10. Testing, Analysis and Control of Wave Dragon, Wave Energy Converter

    DEFF Research Database (Denmark)

    Tedd, James

    One of the prongs in the attack on climate change is the development of alternative, non-polluting sources of energy. Wave Dragon is a device at the forefront of this field of development, converting the energy of ocean waves into electricity. This thesis presents the author's work on the technical...... the expected performance. Other sources of generation are presented, including development and tank testing of a novel power absorbing joint. Wave Dragon belongs in the family of overtopping wave energy converters. The energy is captured by waves running up a ramp and overtopping the crest into a reservoir...... of the process Wave Dragon has undergone to develop from an inventor's concept to a serious contender in the wave energy industry is very valuable. This shows the gradual steps of development testing, increasing in scale and complexity, in parallel with the growth in the organisational structure behind...

  11. Energy Capture Optimization for an Adaptive Wave Energy Converter

    OpenAIRE

    Barradas Berglind, Jose de Jesus; Meijer, Harmen; van Rooij, Marijn; Clemente Pinol, Silvia; Galvan Garcia, Bruno; Prins, Wouter; Vakis, Antonis I.; Jayawardhana, Bayu

    2016-01-01

    Wave energy has great potential as a renewable energy source, and can therefore contribute significantly to the proportion of renewable energy in the global energy mix. This is especially important since energy mixes with high renewable penetration have become a worldwide priority. One solution to facilitate such goals is to harvest the latent untapped energy of the ocean waves and convert it into electrical energy. A device performing such a task is known as a wave energy converter (WEC). In...

  12. Wave Dragon Wave Energy Converters Used as Coastal Protection

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Kofoed, Jens Peter

    2011-01-01

    This paper deals with wave energy converters used to reduce the wave height along shorelines. For this study the Wave Dragon wave energy converter is chosen. The wave height reduction from a single device has been evaluated from physical model tests in scale 1:51.8 of the 260 x 150 m, 24 kW/m model....... Different stiffness of the mooring system and reflector joints has been tested for different wave steepness and relative floating ratios. The influence of each of these parameters on the wave transmission is presented. Additionally, a numerical case study is performed for the Santander Bay in the northern...... Spain, to evaluate the potential for reducing wave heights close the shore by means of Wave Dragons....

  13. Prototype Testing of the Wave Energy Converter Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter Bak; Friis-Madsen, Erik

    2004-01-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power. In the period...... from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57 x 27 m wide and 237 tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world's first offshore wave energy...... converter. The prototype is fully equipped with hydro turbines and automatic control systems, and is instrumented in order to monitor power production, wave climate, forces in mooring lines, stresses in the structure and movements of the Wave Dragon. During the last months, extensive testing has started...

  14. Prototype Testing of the Wave Energy Converter Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Friis-Madsen, Erik

    2006-01-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power. In the period...... from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57!27 m wide and 237 tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world’s first offshore wave energy...... converter. The prototype is fully equipped with hydro turbines and automatic control systems, and is instrumented in order to monitor power production, wave climate, forces in mooring lines, stresses in the structure and movements of the Wave Dragon. In the period May 2003 to January 2005 an extensive...

  15. Experimental Study on the WavePiston Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Angelelli, E.

    This report presents the results of an experimental study of the power performance of the WavePiston wave energy converter. It focuses mainly on evaluating the power generating capabilities of the device and the effect of the following issues: Scaling ratios PTO loading Wave height and wave period...... dependency Oblique incoming waves Distance between plates During the study, the model supplied by the client, WavePiston, has been rigorously tested as all the anticipated tests have been done thoroughly and during all tests, good quality data has been obtained from all the sensors....

  16. The Crest Wing Wave Energy Device

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Antonishen, Michael Patrick

    This report presents the results of a continuation of an experimental study of the wave energy converting abilities of the Crest Wing wave energy converter (WEC), in the following referred to as ‘Phase 2'. The Crest Wing is a WEC that uses its movement in matching the shape of an oncoming wave...

  17. Wave Induced Loads on the LEANCON Wave Energy Converter

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter; Beserra, Eliab Ricarte

    This report is a product of the co-operation agreement between Aalborg University and LEANCON (by Kurt Due Rasmussen) on the evaluation and development of the LEANCON wave energy converter (WEC). The work reported here has focused on evaluation of the wave induced loads on the device, based...... in the laboratory, all under the supervision of the personnel of the Wave Energy Research Group at Department of Civil Engineering, Aalborg University....

  18. Building a better energy future for the remote communities: sustainable energy supply strategy for the village of Inukjuak; Batir un meilleur avenir energetique pour les communautes eloignees: Strategie d'approvisionnement en energie renouvelable pour le village d'Inukjuak

    Energy Technology Data Exchange (ETDEWEB)

    St-Pierre, Stephane; Bui-Quang, Hung; Atagotaaluk, Eric; Benedetti, Bruno

    2010-09-15

    Remote regions of Canada, notwithstanding their natural resources, suffer from a development lag because of a lack of affordable energy. The production in an isolated network comes from thermal sources, highly responsible for global warming. To replace thermal production by renewable energy necessitate the implementation of electricity prices by the public utility who favors the investment. The tariff is actually applied in order to reflect the high production cost. This article shows the actual rate situation, some possible solutions to encourage investment and the hydro electrical development in Inukjuak, where the sale of electricity at the cost of not using fossil fuels would allow to make the investments profitable. [French] Les regions eloignees du Canada, malgre leurs richesses naturelles, accusent un retard dans leur developpement vu le manque d'energie abordable. La production en reseau isole provient de sources thermiques, grandement responsables du rechauffement climatique. Remplacer la production thermique par des energies renouvelables requiert d'implanter des prix d'achat d'electricite par l'utilite publique favorisant l'investissement. Le tarif est presentement applique afin de refleter le cout eleve de production. Ce papier presente la situation tarifaire actuelle, des pistes de solution pour encourager l'investissement, et le developpement hydroelectrique Inukjuak, ou la vente d'electricite au cout d'evitement des combustibles fossiles permettrait de rentabiliser les investissements.

  19. Experiments on the WavePiston, Wave Energy Converter

    DEFF Research Database (Denmark)

    Angelelli, E.; Zanuttigh, B.; Kofoed, Jens Peter

    2011-01-01

    This paper analyses the performance of a new Wave Energy Converter (WEC) of the Oscillating Water Column type (OWC), named WavePiston. This near-shore floating device is composed of plates (i.e. energy collectors) sliding around a cylinder, that is placed perpendicular to the shore. Tests...... in the wave basin at Aalborg University allowed to investigate power production in the North Sea typical wave climate, with varying design parameters such as plate dimensions and their mutual distance. The power produced per meter by each collector is about the 5% of the available wave power. Experimental...... results and survivability considerations suggest that the WavePiston would be particularly suited for installations in milder seas. An example application is therefore presented in the Mediterranean Sea, off-shore the island of Sicily. In this case, each collector harvests the 10% of the available wave...

  20. Probabilistic Design of Wave Energy Devices

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Kofoed, Jens Peter; Ferreira, C.B.

    2011-01-01

    Wave energy has a large potential for contributing significantly to production of renewable energy. However, the wave energy sector is still not able to deliver cost competitive and reliable solutions. But the sector has already demonstrated several proofs of concepts. The design of wave energy...... and advocate for a probabilistic design approach, as it is assumed (in other areas this has been demonstrated) that this leads to more economical designs compared to designs based on deterministic methods. In the present paper a general framework for probabilistic design and reliability analysis of wave energy...

  1. Development of the Wave Energy Converter -Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Sørensen, Hans Christian

    2000-01-01

    2Over the years wave energy has gradually been brought into focus, as it has become clear that the fossil energy resources are limited, and cause large environmental problems, e.g. CO2 pollution. On this background a number of different wave energy converters have been proposed. In Denmark...... the government have decided to appropriate 20 mill. DKK (approx. 2,7 mill. EUR) to the development of wave energy devices over two years, 1998-1999, and the European Community (EC) also supports the development through the JOULECRAFT program....

  2. Ocean floor mounting of wave energy converters

    Science.gov (United States)

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  3. CISBAT 2005 proceedings. Renewables in a changing climate - Innovation in building envelopes and environmental systems; CISBAT 2005 proceedings. Energies renouvelables et climat - Enveloppes et systemes environnementaux innovatifs

    Energy Technology Data Exchange (ETDEWEB)

    Scartezzini, J. L. (ed.)

    2005-07-01

    These proceedings include the contributions presented at the 2005 CISBAT conference, held in Lausanne, Switzerland. Hosted by the Swiss Federal Institute of Technology (EPFL) in Lausanne and jointly organised by the Solar Energy and Buildings Physics Laboratory at the EPFL, Cambridge University and the Massachusetts Institute of Technology (MIT), this international conference looked at 'Innovation in building envelopes and environmental systems'. Along with three keynote presentations on climate change, the use of renewables in the European Union and Swiss policies on solar energy, these 632-page conference proceedings include the conference's 106 presentations grouped in 10 sections. These cover the following topics: Design and renovation of building envelopes (33 contributions); solar collectors (16 contributions); active and passive cooling (9 contributions); indoor environment quality and health (10 contributions); optimisation of daylighting and electric lighting (5 contributions); advanced building control systems (2 contributions); environmental impacts of construction (4 contributions); networks and decentralised energy production (1 contribution); sustainable urban development (12 contributions) and software and new information technologies (14 contributions). Organised each second year, the two-day CISBAT international conference 2005 attracted more than 200 participants from all over the world.

  4. Offshore Desalination Using Wave Energy

    Directory of Open Access Journals (Sweden)

    Álvaro Serna

    2013-01-01

    Full Text Available This paper evaluates the design of an offshore desalination plant currently under preliminary development. The purpose is to test the feasibility of producing drinkable water using wave energy in out-of-sight installations, as an alternative for those locations where land use, civil engineering works, and/or environmental impact make a coast-based solution inadequate. After describing the components, a proposal for sizing them is studied, based on using buoy-measured data at the expected location and their mathematical models of the different sections of the plant. Finally, by using measured buoy data, the influence of sizing on the expected performance is studied for a specific location, and one of the designs is developed in detail.

  5. Comments made by the Syndicate of renewable energies on the draft of orientation law about energies; Observations du Syndicat des energies renouvelables a l'avant-projet de loi d'orientation sur les energies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-12-01

    This document presents the proposals of modifications and the comments made by the French syndicate of renewable energies (SER) about the draft of energy law proposed by the government in November 2003. The document is presented as 3 columns with the original text of the law, the modifications proposed by the SER and their observations. The comments of the SER concern only the promotion of development and use of renewable energy sources, the energy saving certificates and the development of bio-fuels. (J.S.)

  6. Energy in one-dimensional linear waves

    Energy Technology Data Exchange (ETDEWEB)

    Repetto, C E; Roatta, A; Welti, R J, E-mail: welti@fceia.unr.edu.ar [Laboratorio de Vibraciones y Ondas, Departamento de Fisica, Escuela de Formacion Basica, Facultad de Ciencias Exactas, IngenierIa y Agrimensura (UNR), Pellegrini 250, S2000BTP Rosario (Argentina)

    2011-11-15

    This work is based on propagation phenomena that conform to the classical wave equation. General expressions of power, the energy conservation equation in continuous media and densities of the kinetic and potential energies are presented. As an example, we study the waves in a string and focused attention on the case of standing waves. The treatment is applicable to introductory science textbooks. (letters and comment)

  7. Predictability of Wave Energy and Electricity Markets

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez

    2012-01-01

    The articlw addresses an important challenge ahead the integration of the electricity generated by wave energy conversion technologies into the electric grid. Particularly, it looks into the role of wave energy within the day-ahead electricity market. For that the predictability of the theoretical...

  8. Market regulation options in the renewable energy sector : the case of wind energy; Options de reglementation du marche dans le secteur des energies renouvelables : le cas de l'energie eolienne

    Energy Technology Data Exchange (ETDEWEB)

    Uh, D. [Dieter Uh Consultant (Germany)

    2008-04-15

    The liberalization of electricity markets in the 1990s raised a number of issues concerning climate change, the depletion of fossil fuels, and the reaction of economists regarding the economy. This article discussed the role of renewable energy sources in future electricity supplies and emphasized the need to restructure current power management systems in order to ensure sustainable development. Some countries, such as Spain and Germany, have progressively developed tools to promote renewable energies, including wind energy. These include political instruments such as regulatory measures, education and monetary redemption systems that guarantee fixed prices. This system is sometimes perceived by economists as contrary to market rules. However, the author argued that in reality, a system of fair competition does not exist. Renewable energy can be made more competitive by imposing an additional cost on conventional fossil energy, or reducing the costs of renewable energy. The 3 strategies that are important for the successful integration of renewable energies include: (1) developing a comprehensive policy, (2) establishing financing, and (3) establishing the capacity for building. The real challenge lies in developing countries, where international cooperation will play a major role in the support for sustainable development. 5 refs., 4 tabs., 6 figs.

  9. Levelized Cost of Energy of the Weptos wave energy converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report presents the cost of energy calculations of a wave energy array of 90 MW, consisting of 25 x 3.6 MW Weptos wave energy converters. The calculation has been made in analogy with a publically available document presented by the UK government, covering the case of a similar size wind...

  10. Standing wave tube electro active polymer wave energy converter

    Science.gov (United States)

    Jean, Philippe; Wattez, Ambroise; Ardoise, Guillaume; Melis, C.; Van Kessel, R.; Fourmon, A.; Barrabino, E.; Heemskerk, J.; Queau, J. P.

    2012-04-01

    Over the past 4 years SBM has developed a revolutionary Wave Energy Converter (WEC): the S3. Floating under the ocean surface, the S3 amplifies pressure waves similarly to a Ruben's tube. Only made of elastomers, the system is entirely flexible, environmentally friendly and silent. Thanks to a multimodal resonant behavior, the S3 is capable of efficiently harvesting wave energy from a wide range of wave periods, naturally smoothing the irregularities of ocean wave amplitudes and periods. In the S3 system, Electro Active Polymer (EAP) generators are distributed along an elastomeric tube over several wave lengths, they convert wave induced deformations directly into electricity. The output is high voltage multiphase Direct Current with low ripple. Unlike other conventional WECs, the S3 requires no maintenance of moving parts. The conception and operating principle will eventually lead to a reduction of both CAPEX and OPEX. By integrating EAP generators into a small scale S3, SBM achieved a world first: direct conversion of wave energy in electricity with a moored flexible submerged EAP WEC in a wave tank test. Through an extensive testing program on large scale EAP generators, SBM identified challenges in scaling up to a utility grid device. French Government supports the consortium consisting of SBM, IFREMER and ECN in their efforts to deploy a full scale prototype at the SEMREV test center in France at the horizon 2014-2015. SBM will be seeking strategic as well as financial partners to unleash the true potentials of the S3 Standing Wave Tube Electro Active Polymer WEC.

  11. The taxes allocation devoted to the sustainable development (energy conservation, renewable energies); Le credit d'impot dedie au developpement durable (economies d'energie, energies renouvelables)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document aims to bring a better knowledge of the sustainable energy equipment which benefit of tax allocation. It presents the expenditure concerned by this law, the buildings where the expenditure are allowed, the expenditure amount and the administrative procedure to benefit of this decree. (A.L.B.)

  12. Near-Shore Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Ruol, Piero; Zanuttigh, Barbara; Martinelli, Luca

    2011-01-01

    Aim of this note is to analyse the possible application of a Wave Energy Converter (WEC) as a combined tool to protect the coast and harvest energy. Physical model tests are used to evaluate wave transmission past a near-shore floating WEC of the wave activated body type, named DEXA. Efficiency...... and transmission characteristics are approximated to functions of wave height, period and obliquity. Their order of magnitude are 20% and 80%, respectively. It is imagined that an array of DEXA is deployed in front of Marina di Ravenna beach (IT), a highly touristic site of the Adriatic Coast. Based on the CERC...

  13. Hydraulic Response of the Wave Energy Converter Wave Dragon in Nissum Bredning

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter

    This report deals with the hydraulic performance of the wave energy converter Wave Dragon, Nissum Bredning prototype.......This report deals with the hydraulic performance of the wave energy converter Wave Dragon, Nissum Bredning prototype....

  14. Energy Capture Optimization for an Adaptive Wave Energy Converter

    NARCIS (Netherlands)

    Barradas Berglind, Jose de Jesus; Meijer, Harmen; van Rooij, Marijn; Clemente Pinol, Silvia; Galvan Garcia, Bruno; Prins, Wouter; Vakis, Antonis I.; Jayawardhana, Bayu

    2016-01-01

    Wave energy has great potential as a renewable energy source, and can therefore contribute significantly to the proportion of renewable energy in the global energy mix. This is especially important since energy mixes with high renewable penetration have become a worldwide priority. One solution to

  15. Investigation of Wave Transmission from a Floating Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Thomas Lykke

    2012-01-01

    This paper focuses on the calibration of the MIKE21BW model against the measured wave height reduction behind a 24 kW/m Wave Dragon (WD) wave energy converter. A numerical model is used to determine the wave transmission through the floating WD in varying wave conditions. The transmission obtained...... from the MIKE21BW model is compared to results from a simpler model, based on the integration of wave energy flux. The conclusion is that the simplified approach provides results similar to the transmission obtained from the numerical model, both for a single WD and a farm of multiple WDs....

  16. Wave energy harvesting by piezoelectric flexible plates

    Science.gov (United States)

    Shoele, Kourosh

    2013-11-01

    The ocean tidal currents and waves are very attractive sources of energy for extraction due to their vast availability and very low environmental impacts. Among different technologies, the harvesting of flow energy through the flapping of flexible plates has recently gained attentions. The sustained oscillation of a flexible plate is the result of a fluid-structure interaction occurrence, mainly from two different situations. In the first case, the oscillation is from the fluttering instability of the plate. In the second case, the unsteady flow is presented in the incoming flow either from the oscillatory sources such as surface waves. The mechanical energy is then converted to electricity using piezoelectric patches connected to the plate. In this paper, we discuss the novel approach to extract the wave energy using piezoelectric plates and discuss how parameters of the piezoelectric plate can be adjusted to increase the amount of energy that can be extracted from the current and free-surface waves.

  17. Performance Evaluation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Pecher, Arthur

    . Guidelines for the development of wave energy converters recommend the use of different prototypes, having different sizes, which have to perform tank tests or sea trials. This implicates the need of different testing environment, which shifts from being controllable to uncontrollable with the development...... stages, and results thereby in a need for specific test objectives and procedures for each development stage. This PhD thesis has looked into the different development stages and more specifically in the performance assessment of wave energy converters based on tank testing and sea trials. The objective......Ocean waves provide a sustainable, power-dense, predictable and widely available source of energy that could provide about 10 % of worlds energy needs. While research into wave energy has been undertaken for decades, a significant increase in related activities has been seen in the recent years...

  18. Innovative Breakwaters Design for Wave Energy Conversion

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Stagonas, D.; Müller, G.

    2012-01-01

    This paper intends contributing to an economically and environmentally sustainable development of coastal infrastructures by investigating the possibility of combining together breakwaters and Wave Energy Converters (WEC). The latter change the wave energy to electricity, which may serve both...... the rubble mound breakwaters and seawalls related activity and the energy demand of small human communities. Wave loadings and overtopping on a seawall and rubble mound breakwater with front reservoir are discussed on the basis of physical 2-D model tests carried out at University of Southampton (UK...

  19. Development of the Wave Energy Converter

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Sørensen, Hans Christian

    2000-01-01

    The development of the wave energy converter Wave Dragon (WD) is presented. The WD is based on the overtopping principle. Initially a description of the WD is given. Then the development over time in terms of the various research and development projects working with the concept is described...

  20. Energy Extraction from a Slider-Crank Wave Energy under Irregular Wave Conditions: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Sang, Yuanrui; Karayaka, H. Bora; Yan, Yanjun; Zhang, James Z.; Muljadi, Eduard; Yu, Yi-Hsiang

    2015-08-24

    A slider-crank wave energy converter (WEC) is a novel energy conversion device. It converts wave energy into electricity at a relatively high efficiency, and it features a simple structure. Past analysis on this particular WEC has been done under regular sinusoidal wave conditions, and suboptimal energy could be achieved. This paper presents the analysis of the system under irregular wave conditions; a time-domain hydrodynamics model is adopted and a rule-based control methodology is introduced to better serve the irregular wave conditions. Results from the simulations show that the performance of the system under irregular wave conditions is different from that under regular sinusoidal wave conditions, but a reasonable amount of energy can still be extracted.

  1. Image processing to optimize wave energy converters

    Science.gov (United States)

    Bailey, Kyle Marc-Anthony

    The world is turning to renewable energies as a means of ensuring the planet's future and well-being. There have been a few attempts in the past to utilize wave power as a means of generating electricity through the use of Wave Energy Converters (WEC), but only recently are they becoming a focal point in the renewable energy field. Over the past few years there has been a global drive to advance the efficiency of WEC. Placing a mechanical device either onshore or offshore that captures the energy within ocean surface waves to drive a mechanical device is how wave power is produced. This paper seeks to provide a novel and innovative way to estimate ocean wave frequency through the use of image processing. This will be achieved by applying a complex modulated lapped orthogonal transform filter bank to satellite images of ocean waves. The complex modulated lapped orthogonal transform filterbank provides an equal subband decomposition of the Nyquist bounded discrete time Fourier Transform spectrum. The maximum energy of the 2D complex modulated lapped transform subband is used to determine the horizontal and vertical frequency, which subsequently can be used to determine the wave frequency in the direction of the WEC by a simple trigonometric scaling. The robustness of the proposed method is provided by the applications to simulated and real satellite images where the frequency is known.

  2. State estimation for wave energy converters

    Energy Technology Data Exchange (ETDEWEB)

    Bacelli, Giorgio; Coe, Ryan Geoffrey

    2017-04-01

    This report gives a brief discussion and examples on the topic of state estimation for wave energy converters (WECs). These methods are intended for use to enable real-time closed loop control of WECs.

  3. Power Generation Using Mechanical Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Srinivasan Chandrasekaran

    2012-03-01

    Full Text Available Ocean wave energy plays a significant role in meeting the growing demand of electric power. Economic, environmental, and technical advantages of wave energy set it apart from other renewable energy resources. Present study describes a newly proposed Mechanical Wave Energy Converter (MEWC that is employed to harness heave motion of floating buoy to generate power. Focus is on the conceptual development of the device, illustrating details of component level analysis. Employed methodology has many advantages such as i simple and easy fabrication; ii easy to control the operations during rough weather; and iii low failure rate during normal sea conditions. Experimental investigations carried out on the scaled model of MWEC show better performance and its capability to generate power at higher efficiency in regular wave fields. Design Failure Mode and Effect Analysis (FMEA shows rare failure rates for all components except the floating buoy.

  4. Microstructural Design for Stress Wave Energy Management

    Science.gov (United States)

    2013-04-01

    dissipation (i.e. viscoelasticity ) to control the amplitude, energy, and direction of propagating stress-waves in a multilayered structure. 15. SUBJECT...Polyurea based foam 7 4) Controlling transmission and reflection of pressure and shear waves in a multilayered anisotropic structure 10 5...methods with conventional mechanisms for shear dissipation (i.e. viscoelasticity ) to control the amplitude, energy, and direction of propagating stress

  5. Numerical Modelling and Statistical Analysis of Ocean Wave Energy Converters and Wave Climates

    OpenAIRE

    Li, Wei

    2016-01-01

    Ocean wave energy is considered to be one of the important potential renewable energy resources for sustainable development. Various wave energy converter technologies have been proposed to harvest the energy from ocean waves. This thesis is based on the linear generator wave energy converter developed at Uppsala University. The research in this thesis focuses on the foundation optimization and the power absorption optimization of the wave energy converters and on the wave climate modelling a...

  6. Strategy and development means of the energy efficiency and renewable energies sources in France; Strategie et moyens de developpement de l'efficacite energetique et des sources d'energies renouvelables en France

    Energy Technology Data Exchange (ETDEWEB)

    Cochet, Y.

    2000-09-01

    In the framework of the renewable energies development policy and the energy mastership wanted by the Government, a document has been asked by the Prime Minister. It evaluates the development prospects at long and medium dated, of the main chains of renewable energies production taking into account the national developable deposits size, the technologies assessment, the environmental impacts and the competition facing the traditional energies. It evaluates the measures leading to an increasing efficiency. Measures concerning the regulations, the budget, and the fiscality are also discussed. From these analysis, a national strategy for actions in favor the renewable energies, are proposed. (A.L.B.)

  7. Wave energy potential in Galicia (NW Spain)

    DEFF Research Database (Denmark)

    Iglesias, Gregorio; López, Mario; Carballo, Rodrigo

    2009-01-01

    Wave power presents significant advantages with regard to other CO2-free energy sources, among which the predictability, high load factor and low visual and environmental impact stand out. Galicia, facing the Atlantic on the north-western corner of the Iberian Peninsula, is subjected to a very...... harsh wave climate; in this work its potential for energy production is assessed based on three-hourly data from a third generation ocean wave model (WAM) covering the period 1996 - 2005. Taking into account the results of this assessment along with other relevant considerations such as the location...

  8. Reflectors to Focus Wave Energy

    DEFF Research Database (Denmark)

    Kramer, Morten; Frigaard, Peter

    2005-01-01

    boundary element method. The calculations are verified by laboratory experiments and a very good agreement is found. The paper gives estimates of possible power benefit for different wave reflector geometries and optimal geometrical design parameters are specified. On this basis inventors of WEC’s can...

  9. Assessment of wave energy resources in Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Stopa, Justin E.; Cheung, Kwok Fai [Department of Ocean and Resources Engineering, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); Chen, Yi-Leng [Department of Meteorology, University of Hawaii at Manoa, Honolulu, HI 96822 (United States)

    2011-02-15

    Hawaii is subject to direct approach of swells from distant storms as well as seas generated by trade winds passing through the islands. The archipelago creates a localized weather system that modifies the wave energy resources from the far field. We implement a nested computational grid along the major Hawaiian Islands in the global WaveWatch3 (WW3) model and utilize the Weather Research and Forecast (WRF) model to provide high-resolution mesoscale wind forcing over the Hawaii region. Two hindcast case studies representative of the year-round conditions provide a quantitative assessment of the regional wind and wave patterns as well as the wave energy resources along the Hawaiian Island chain. These events of approximately two weeks each have a range of wind speeds, ground swells, and wind waves for validation of the model system with satellite and buoy measurements. The results demonstrate the wave energy potential in Hawaii waters. While the episodic swell events have enormous power reaching 60 kW/m, the wind waves, augmented by the local weather, provide a consistent energy resource of 15-25 kW/m throughout the year. (author)

  10. Probabilistic Forecasting of the Wave Energy Flux

    DEFF Research Database (Denmark)

    Pinson, Pierre; Reikard, G.; Bidlot, J.-R.

    2012-01-01

    markets. A methodology for the probabilistic forecasting of the wave energy flux is introduced, based on a log-Normal assumption for the shape of predictive densities. It uses meteorological forecasts (from the European Centre for Medium-range Weather Forecasts – ECMWF) and local wave measurements......Wave energy will certainly have a significant role to play in the deployment of renewable energy generation capacities. As with wind and solar, probabilistic forecasts of wave power over horizons of a few hours to a few days are required for power system operation as well as trading in electricity......% and 70% in terms of Continuous Rank Probability Score (CRPS), depending upon the test case and the lead time. It is finally shown that the log-Normal assumption can be seen as acceptable, even though it may be refined in the future....

  11. Clustering of cycloidal wave energy converters

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, Stefan G.

    2016-03-29

    A wave energy conversion system uses a pair of wave energy converters (WECs) on respective active mountings on a floating platform, so that the separation of the WECs from each other or from a central WEC can be actively adjusted according to the wavelength of incident waves. The adjustable separation facilitates operation of the system to cancel reactive forces, which may be generated during wave energy conversion. Modules on which such pairs of WECs are mounted can be assembled with one or more central WECs to form large clusters in which reactive forces and torques can be made to cancel. WECs of different sizes can be employed to facilitate cancelation of reactive forces and torques.

  12. Aquabuoy Wave Energy Converter

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Margheritini, Lucia; Frigaard, Peter

    The work reported here is part of the contract agreement between the Finavera Renewables Ocean Energy Ltd. and the Department of Civil Engineering Hydraulics and Coastal Engineering Laboratory to instrument a model in scale 1:10 to prototype of the AquaBuOY (AB) wave energy converter and to analyse...

  13. Performance Evaluation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Pecher, Arthur

    . Guidelines for the development of wave energy converters recommend the use of different prototypes, having different sizes, which have to perform tank tests or sea trials. Thisimplicates the need of different testing environment, which shifts from being controllable to uncontrollable with the development...... stages, and results thereby in a need for specific testobjectives and procedures for each development stage. This PhD thesis has looked into the different development stages and more specifically in the performance assessment of wave energy converters based on tank testing and sea trials. The objective......Ocean waves provide a sustainable, power-dense, predictable and widely available source of energy that could provide about 10 % of worlds energy needs. While research into waveenergy has been undertaken for decades, a significant increase in related activities has been seen in the recent years...

  14. Worlds Largest Wave Energy Project 2007 in Wales

    DEFF Research Database (Denmark)

    Christensen, Lars; Friis-Madsen, Erik; Kofoed, Jens Peter

    2006-01-01

    a large number of fundamentally different technologies are utilised to harvest wave energy. The Wave Dragon belongs to the wave overtopping class of converters and the paper describes the fundamentals and the technical solutions used in this wave energy converter. An offshore floating WEC like the Wave......This paper introduces world largest wave energy project being developed in Wales and based on one of the leading wave energy technologies. The background for the development of wave energy, the total resource ands its distribution around the world is described. In contrast to wind energy turbines...

  15. Fundamental formulae for wave-energy conversion.

    Science.gov (United States)

    Falnes, Johannes; Kurniawan, Adi

    2015-03-01

    The time-average wave power that is absorbed from an incident wave by means of a wave-energy conversion (WEC) unit, or by an array of WEC units-i.e. oscillating immersed bodies and/or oscillating water columns (OWCs)-may be mathematically expressed in terms of the WEC units' complex oscillation amplitudes, or in terms of the generated outgoing (diffracted plus radiated) waves, or alternatively, in terms of the radiated waves alone. Following recent controversy, the corresponding three optional expressions are derived, compared and discussed in this paper. They all provide the correct time-average absorbed power. However, only the first-mentioned expression is applicable to quantify the instantaneous absorbed wave power and the associated reactive power. In this connection, new formulae are derived that relate the 'added-mass' matrix, as well as a couple of additional reactive radiation-parameter matrices, to the difference between kinetic energy and potential energy in the water surrounding the immersed oscillating WEC array. Further, a complex collective oscillation amplitude is introduced, which makes it possible to derive, by a very simple algebraic method, various simple expressions for the maximum time-average wave power that may be absorbed by the WEC array. The real-valued time-average absorbed power is illustrated as an axisymmetric paraboloid defined on the complex collective-amplitude plane. This is a simple illustration of the so-called 'fundamental theorem for wave power'. Finally, the paper also presents a new derivation that extends a recently published result on the direction-average maximum absorbed wave power to cases where the WEC array's radiation damping matrix may be singular and where the WEC array may contain OWCs in addition to oscillating bodies.

  16. Wave energy in Europe: current status and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Clement, Alain [Exole Centrale de Nantes, Nantes, (France); McCullen, Pat [ESBI (Ireland); Falcao, Antonio [IST, Lisboa (Portugal); Firoentino, Antonio [Ponte di Archimede nello Streto di Messina, Messina (Italy); Gardner, Fred [Teamwork Technology (Netherlands); Hammarlund, Karin [Hammarlund A., Konsult (Sweden); Lemonis, George [Centre for Renewable Energy Sources, Attika (Greece); Lewis, Tony [University College Cork, Cork (Ireland)

    2002-10-01

    The progress in wave energy conversion in Europe during the past ten years is reviewed, and current activities and initiatives in the wave energy sector at National and Union level are described. Other important activities worldwide are summarized. The technical and economic status in wave energy conversion is outlined, and important wave energy developments are presented.

  17. Parametric pendulum based wave energy converter

    Science.gov (United States)

    Yurchenko, Daniil; Alevras, Panagiotis

    2018-01-01

    The paper investigates the dynamics of a novel wave energy converter based on the parametrically excited pendulum. The herein developed concept of the parametric pendulum allows reducing the influence of the gravity force thereby significantly improving the device performance at a regular sea state, which could not be achieved in the earlier proposed original point-absorber design. The suggested design of a wave energy converter achieves a dominant rotational motion without any additional mechanisms, like a gearbox, or any active control involvement. Presented numerical results of deterministic and stochastic modeling clearly reflect the advantage of the proposed design. A set of experimental results confirms the numerical findings and validates the new design of a parametric pendulum based wave energy converter. Power harvesting potential of the novel device is also presented.

  18. Reliability assessment of wave Energy devices

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kramer, Morten; Kofoed, Jens Peter

    2014-01-01

    Energy from waves may play a key role in sustainable electricity production in the future. Optimal reliability levels for components used for Wave Energy Devices (WEDs) need to be defined to be able to decrease their cost of electricity. Optimal reliability levels can be found using probabilistic...... near Hanstholm (DK). In the present paper, a generic example for an extreme limit state is considered. The extreme limit state case considers important failure modes of the system which are determined by a Fault Tree Analysis (FTA) and Failure Mode and Effects Analysis (FMEA). The resulting reliability...

  19. Carrying Energy to the Corona with Waves

    Science.gov (United States)

    Kohler, Susanna

    2017-11-01

    The solar corona has a problem: its weirdly hot! A new study explores how magnetic waves might solve the mystery of the unusually hot corona by transporting energy to the outer atmosphere of the Sun.The Problem with the CoronaThe temperatures of different layers of the Sun. Click for a closer look. [ISAS/JAXA]The corona, the outer layer of the Suns atmosphere, has typical temperatures of 13 million K significantly hotter than the cool 5,800 K of the photosphere, the surface of the Sun far below it. Since temperatures ordinarily drop the further you get from the heat source (in this case, the Suns atom-fusing center), this so-called coronal heating problem poses a definite puzzle.As is the case for many astronomical mysteries, the answer may have something to do with magnetic fields. Alfvn waves, magnetohydrodynamic waves that travel through magnetized plasma, could potentially carry energy from the convective zone beneath the Suns photosphere up into the solar atmosphere. There, the Alfvn waves could turn into shock waves that dissipate their energy as heat, causing the increased temperature of the corona.The Daniel K. Inouye Solar Telescope, located on the summit of Haleakala in Hawaii, is scheduled to be completed in 2018. [Ekrem Canli]Predicting ObservationsAlfvn waves as a means of delivering heat to the corona makes for a nice picture, but theres a lot of work to be done before we can be certain that this is the correct model. Observational evidence of Alfvn waves has thus far been limited to specific conditions and the observations have not yet been enough to convince us that Alfvn waves can deliver enough energy to explain the coronas temperature.Lucas Tarr, a scientist at the Naval Research Laboratory, argues that upcoming solar telescopes may make it easier to detect these waves but first we need to know what to look for! In a recent study, Tarr uses a simplified analytic model to show which frequencies of waves are likely to carry power when magnetic

  20. Systems and methods for wave energy conversion

    Science.gov (United States)

    MacDonald, Daniel G.; Cantara, Justin; Nathan, Craig; Lopes, Amy M.; Green, Brandon E.

    2017-02-28

    Systems for wave energy conversion that have components that can survive the harsh marine environment and that can be attached to fixed structures, such as a pier, and having the ability to naturally adjust for tidal height and methods for their use are presented.

  1. Underwater noise from a wave energy converter

    DEFF Research Database (Denmark)

    Tougaard, Jakob

    A recent addition to the anthropogenic sources of underwater noise is offshore wave energy converters. Underwater noise was recorded from the Wavestar wave energy converter located at Hastholm, Denmark (57°7.73´N, 8°37.23´E). The Wavestar is a full-scale test and demonstration converter...... in full operation and start and stop of the converter. Median broad band (10 Hz – 20 kHz) sound pressure level (Leq) was 123 dB re. 1 Pa, irrespective of status of the wave energy converter (stopped, running or starting/stopping). The most pronounced peak in the third-octave spectrum was in the 160 Hz...... significant noise above ambient could be detected above the 250 Hz band. The absolute increase in noise above ambient was very small. L50 third-octave levels in the four bands with the converter running were thus only 1-2 dB above ambient L50 levels. The noise recorded 25 m from the wave energy converter...

  2. Layout Optimisation of Wave Energy Converter Arrays

    DEFF Research Database (Denmark)

    Ruiz, Pau Mercadé; Nava, Vincenzo; Topper, Mathew B. R.

    2017-01-01

    This paper proposes an optimisation strategy for the layout design of wave energy converter (WEC) arrays. Optimal layouts are sought so as to maximise the absorbed power given a minimum q-factor, the minimum distance between WECs, and an area of deployment. To guarantee an efficient optimisation...

  3. Centre de recherche des énergies renouvelables

    OpenAIRE

    NEMICHE, Youssouf; AZZOUT, Sarah

    2013-01-01

    Dans ce cadre le pole de recherche sur les énergies renouvelables que nous avons étudiées dans la ville de Tlemcen marquera une ère de développement dans la recherche des énergies renouvelables. Nous savons tous : Architectes, Ingénieurs, Paysages, écologistes et autres très bien aujourd’hui que les solutions existent, nous avons tous le pouvoir de changer alors qu’est ce qu’on attend.

  4. Inventing a Better Way to Capture the Energy of Waves

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    NREL's ocean energy research team's efforts to develop more robust and cost-effective wave energy converters have yielded a record of invention titled, 'Wave Energy Conversion Devices with Actuated Geometry.' This innovative wave device features a wave converter with controlled geometry that increases energy capture and prevents large waves from overloading the generator. The invention's control system actuates flaps that open and close depending on wave conditions. Better control of the wave forces acting on wave energy conversion devices provides a solution to one of wave energy's biggest challenges -- and could cut the cost of wave energy in half.

  5. Wave energy transmission apparatus for high-temperature environments

    Science.gov (United States)

    Buckley, John D. (Inventor); Edwards, William C. (Inventor); Kelliher, Warren C. (Inventor); Carlberg, Ingrid A. (Inventor)

    2010-01-01

    A wave energy transmission apparatus has a conduit made from a refractory oxide. A transparent, refractory ceramic window is coupled to the conduit. Wave energy passing through the window enters the conduit.

  6. Coordinated Control of Wave Energy Converters Subject to Motion Constraints

    National Research Council Canada - National Science Library

    Wang, Liguo; Engström, Jens; Leijon, Mats; Isberg, Jan

    2016-01-01

    ...) damping of each wave energy converter in the frequency domain in each sea state. In a case study, a wave energy farm consisting of four converters based on the concept developed by Uppsala University is studied...

  7. Underwater Noise Modelling of Wave Energy Devices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Future large-scale implementation of wave energy converts (WECs) will introduce an anthropogenic activity in the ocean which may contribute to underwater noise. The Ocean houses several marine species with acoustic sensibility; consequently the potential impact of the underwater noise needs to be addressed. At present, there are no acoustic impact studies based on acquired data. The WEAM project (Wave Energy Acoustic Monitoring) aims at developing an underwater noise monitoring plan for WECs. The development of an acoustic monitoring plan must consider the sound propagation in the ocean, identify noise sources, understand the operational characteristics and select adequate instrumentation. Any monitoring strategy must involve in-situ measurements. However, the vast distances which sound travels within the ocean, can make in-situ measurements covering the entire area of interest, impracticable. This difficulty can be partially overcome through acoustic numerical modelling. This paper presents a synthetic study, on the application of acoustic forward modelling and the evaluation of the impact of noise produced by wave energy devices on marine mammals using criteria based on audiograms of dolphins, or other species. The idea is to illustrate the application of that methodology, and to show to what extent it allows for estimating distances of impacts due to acoustic noise.

  8. Peculiarities in the energy transfer by waves on strained strings

    Science.gov (United States)

    Butikov, Eugene I.

    2013-12-01

    Localization of elastic potential energy associated with waves in a stretched string is discussed. The influence of nonlinear coupling between transverse and longitudinal waves on the density of energy is investigated by considering the examples of stationary traveling and standing waves. Misunderstandings about different expressions for the density of potential energy encountered in the literature are clarified. The common statement regarding the relationship between the densities of kinetic and potential energies in a transverse wave is criticized.

  9. Practical performances of MPC for wave energy converters

    DEFF Research Database (Denmark)

    Ferri, Francesco; Tetu, Amelie; Hals, J.

    2016-01-01

    Maximising the efficiency of Wave Energy Converter (WEC) is one of the important tasks toward the exploitation of the wave energy resource. Along with a proper design of the device, an important way to achieve better energy performances is to improve the wave-body interaction by applying...

  10. Wave Energy Research, Testing and Demonstration Center

    Energy Technology Data Exchange (ETDEWEB)

    Batten, Belinda [Oregon State Univ., Corvallis, OR (United States)

    2014-09-30

    The purpose of this project was to build upon the research, development and testing experience of the Northwest National Marine Renewable Energy Center (NNMREC) to establish a non-grid connected open-ocean testing facility for wave energy converters (WECs) off the coast of Newport, Oregon. The test facility would serve as the first facility of its kind in the continental US with a fully energetic wave resource where WEC technologies could be proven for west coast US markets. The test facility would provide the opportunity for self-contained WEC testing or WEC testing connected via an umbilical cable to a mobile ocean test berth (MOTB). The MOTB would act as a “grid surrogate” measuring energy produced by the WEC and the environmental conditions under which the energy was produced. In order to realize this vision, the ocean site would need to be identified through outreach to community stakeholders, and then regulatory and permitting processes would be undertaken. Part of those processes would require environmental baseline studies and site analysis, including benthic, acoustic and wave resource characterization. The MOTB and its myriad systems would need to be designed and constructed.The first WEC test at the facility with the MOTB was completed within this project with the WET-NZ device in summer 2012. In summer 2013, the MOTB was deployed with load cells on its mooring lines to characterize forces on mooring systems in a variety of sea states. Throughout both testing seasons, studies were done to analyze environmental effects during testing operations. Test protocols and best management practices for open ocean operations were developed. As a result of this project, the non-grid connected fully energetic WEC test facility is operational, and the MOTB system developed provides a portable concept for WEC testing. The permitting process used provides a model for other wave energy projects, especially those in the Pacific Northwest that have similar

  11. EB Frond wave energy converter - phase 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The EB Frond project is a wave energy programme developed by The Engineering Business (EB) from an original idea at Lancaster University. The EB Frond is a wave generator with a collector vane on top of an arm that pivots near the seabed. Phase 1 of the project demonstrated the technical feasibility of the project and provided proof of concept. Phase 2 involved further assesment of the technical and commercial viability of the concept through the development of mathematical and physical modelling methods. The work involved small-scale (1/25th) testing in wave tanks at Newcastle and Lancaster Universities and the development, verification and validation of a time domain mathematical model. The decision by EB to put on hold its renewable generation programme meant that plans to test at an intermediate scale (1/16th), assess different survival strategies in extreme wave conditions, carry out site characterisation for full-scale systems and to produce a robust economic model were not fulfilled. However, the mathematical and physical modelling work was used to develop an economic model for the Frond system. This produced a predicted unit cost of electricity by a pre-commercial 5 MW demonstration farm of about 17 pence/kWh. The report discusses the small-scale testing, test results, mathematical modelling, analysis and interpretation, survivability, the economic model and the development route to full-scale production.

  12. Proceedings of the business and investment forum for renewable energy in the Arab Regions; Recueil des interventions du forum d'affaires pour le developpement des energies renouvelables dans la region Arabe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This event on renewable energies comes within the framework of the World Solar Programme. Indeed, following the World Solar Summit in Harare in 1997, UNESCO, the European Commission, ADEME and ICAEN have taken the initiative to organize a series of Business Forums devoted to renewable energies. The first two were held in Quito in 1998 and in Harare in 1999. The Harare forum was especially devoted to the use of renewable energies in decentralized rural electrification. Promoters wish to focus debates and thinking on themes with a particular bearing on surrounding countries. This is why the main subject for this Forum is how renewable energies can be used for a sustainable development in the Arab region, supplying energy and water. The growing demand for water is a crucial issue in Middle Eastern and Mediterranean countries. The relatively limited resources, the high population growth and the regular improvement in the standard of living can, in the medium term, only confirm the attention that should be given to the problem. Firstly, it is a question of identifying the most efficient and best-adapted technologies, and enabling their dissemination, all the while developing the know-how of local operators. It is also a matter of focusing on the problems connected with the financing of the projects. Indeed, public aid for development can be sought on both sides, and international financing can be mobilized at the World Bank, within the Global Environmental Facility, or through development banks, although access to them still seems difficult. How can we simplify these procedures and at the same time meet the necessary guarantees, and what are the most efficient financing mechanisms? Lastly, to implement these projects it is vital that we increase commercial opportunities and favour the bringing together of all the players present here today - the users, and the public and private sectors. The participation of industrialists will therefore play a fundamental role here. To

  13. Conversion of organic matter : production of renewable energy at Riviere-du-Loup; Conversion de la matiere organique : production d'energie renouvelable a Riviere-du-Loup

    Energy Technology Data Exchange (ETDEWEB)

    Laforest, M. [Envirogaz, Portneuf, PQ (Canada)

    2010-03-15

    The municipality of Riviere-du-Loup in Quebec requested a study to find a solution for waste management. The study suggested that instead of composting, biomethanation should be used as a waste management solution to recuperate the energy emitted from organic matter via anaerobic digestion. Composting has several disadvantages, such as odour and loss of unused energy. The municipality estimated that 17,000 tons of organic waste can produce 1.4 million m{sup 3} of biomethane, which has similar properties to natural gas. In addition, this technique would have both economic and environmental advantages, including reduced greenhouse gas emissions. This project has received funding from provincial and federal governments but still faces challenges since technologies supporting biomethane in Quebec are still underdeveloped compared to Europe and the United States. 5 figs.

  14. Hydrogen production by renewable energies. Final report of the integrated research program 4.1; Production d'hydrogene par des energies renouvelables. Rapport final du programme de recherche integree 4.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The aim of this PRI is to study and to develop methods of hydrogen production based on the renewable energies, without greenhouse gases emission in order to implement clean processes in the framework of a sustainable development. Two approaches are proposed. The first one uses microorganisms in condition of hydrogen production (micro-algae). The second one is based on the bio-mimetism approaches aiming to reproduce artificially the biological mechanisms of the photosynthesis leading to water decomposition. (A.L.B.)

  15. Climate change: what perspectives for the development of renewable energies in France and in Europe?; Changement climatique: quelles perspectives pour le developpement des energies renouvelables en France et en Europe?

    Energy Technology Data Exchange (ETDEWEB)

    Mousel, M. [Ministere de l' Amenagement du Territoire et de l' Environnement, MIES, 75 - Paris (France); Kandel, R. [Ecole Polytechnique, Lab. de Meteorologie Dynamique, CNRS, 91 - Palaiseau (France); Connor, H. [HELIO International (France)] [and others

    2000-07-01

    The greatest challenge facing the world at the beginning of the century, according to hundreds of business and government leaders is climate change. Different propositions can help fighting against a global warming. The development of renewable energy sources, ( wind power, geothermal power) the market of carbon dioxide, the reduction of greenhouse gases emissions, path by path, the building and the heat network are so possibilities that are studied. (N.C.)

  16. R&D Towards Commercialization of Sea Wave Slot Cone Generator (SSG) Overtopping Wave Energy Converter

    DEFF Research Database (Denmark)

    Margheritini, Lucia

    between ventures and private investors, and to promote an accelerated shift from a technology to a market focus. This Thesis is presented as a collection of works published by the author on her research on the Sea wave Slot cone Generator wave energy converter. These include 1 accepted and 2 submitted...... from technology to market focus. This has been done by using the R&D steps for a specific wave energy converter as an example of best practice for wave energy development towards commercialization. The Sea wave Slot cone Generator (SSG) is a multilevel wave energy converter. Incoming waves overtop...... the consumption of fossil fuels and related greenhouse-gas emissions and to the development of Renewable Energy Sources (RES). Diversification of RES is fundamental in such a path to ensure sustainability. In this contest wave energy can provide great contribution, having its worldwide resource been estimated...

  17. Design guidelines of triboelectric nanogenerator for water wave energy harvesters

    Science.gov (United States)

    Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Abu Yazid, Taher; Zu, Jean; Wang, Zhong Lin

    2017-05-01

    Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester’s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

  18. Design guidelines of triboelectric nanogenerator for water wave energy harvesters

    KAUST Repository

    Ahmed, Abdelsalam

    2017-04-11

    Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester\\'s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

  19. Sea wave energy based in nanotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Duque, Carlos

    2010-09-15

    Application on which it turns east document is the recovery of the energy of the sea waves turning it into electricity by means of the combination of nano-piezoelectric and condensing, the system would be seen like a compound floating fabric of million piezoelectric crystals that turn the oscillating movement of the sea into micro-electrical signals that they are added and they left by means cables to the surface where electronics devices classified to the load of condensers, from the electricity is confined and later is invested and synchronize itself with the great national mains.

  20. Hydraulic Evaluation of the Crest Wing Wave Energy Converter

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Antonishen, Michael Patrick

    This report presents the results of an experimental study of the wave energy converting abilities of the Crest Wing wave energy converter (WEC). The Crest Wing is a WEC that uses its movement in matching the shape of an oncoming wave to generate power. Model tests have been performed using a scale...... model (length scale 1:30), provided by WaveEnergyFyn, in regular and irregular wave states that can be found in Assessment of Wave Energy Devices. Best Practice as used in Denmark (Frigaard et al., 2008). The tests were carried out at Dept. of Civil Engineering, Aalborg (Frigaard et al., 2008......). The tests were carried out at Dept. of Civil Engineering, Aalborg University (AAU) in the 3D deep water wave tank. The displacement and force applied to a power take off system, provided by WaveEnergyFyn, were measured and used to calculate total power take off....

  1. Report on power consumption from renewable energy sources in France; Rapport sur la consommation d'electricite produite a partir de sources d'energie renouvelable en France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-03-15

    This report presents an analysis of the realization of the national objectives of domestic consumption of electricity of renewable origin. Conformably with article 3 of the European directive no 2001/77/CE from September 27, 2001, it takes into account the climatic factors susceptible to interfere with the realization of the objectives and indicates to what extent the actions implemented are conformable with the national commitment of France in the domain of climatic change. Content: national objectives and tools for the sustained development of renewable energy sources (programs, investments, financial incentives, environmental policy), power consumption of renewable origin in 2004 (demand factors, evolution of renewable power generation between 1997 and 2004), 2005 highlights. (J.S.)

  2. Power Collection from Wave Energy Farms

    Directory of Open Access Journals (Sweden)

    Marta Molinas

    2013-04-01

    Full Text Available Most Wave Energy Converters (WECs produce highly distorted power due to thereciprocal motion induced by ocean waves. Some WEC systems have integrated energystorage that overcomes this limitation, but add significant expenses to an already costlysystem. As an alternative approach, this article investigates the direct export option thatrelies on aggregate smoothing among several WECs. By optimizing the positioning of theWEC devices with respect to the incoming waves, fluctuations may be mutually canceledout between the devices. This work is based on Fred. Olsen’s WEC system Lifesaver, anda WEC farm consisting of 48 devices is designed in detail and simulated. The major costdriver for the electrical export system is the required oversize factor necessary for transferof the average power output. Due to the low power quality, this number can be as high as20 at the entry point of the electrical system, and it is thus crucial to quickly improve thepower quality so that the downstream power system is efficiently utilized. The simulationsundertaken in this work indicate that a high quality power output can be achieved at the farmlevel, but that a significant oversize factor will be required in the intermediate power systemwithin the farm.

  3. The Draukie's Tale: Origin Myth for Wave Energy

    DEFF Research Database (Denmark)

    Watts, Laura

    2017-01-01

    Poem based on ethnographic research with people and places around the European Marine Energy Centre, the world's longest running test site for wave and tide energy, Orkney islands, Scotland.......Poem based on ethnographic research with people and places around the European Marine Energy Centre, the world's longest running test site for wave and tide energy, Orkney islands, Scotland....

  4. The energy density of a Landau damped plasma wave

    NARCIS (Netherlands)

    Best, R. W. B.

    1999-01-01

    In this paper some theories about the energy of a Landau damped plasma wave are discussed and new initial conditions are proposed. Analysis of a wave packet, rather than an infinite wave, gives a clear picture of the energy transport from field to particles. Initial conditions are found which excite

  5. Preliminary Load Estimations for DEXA Wave Energy Device - Hanstholm, Denmark

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter

    by DEXA Wave Energy ApS, in regular and irregular wave states, as described in Assessment of Wave Energy Devices. Best Practice as used in Denmark (Frigaard et al., 2008). The length scale of the model was 1:20 compared to a full scale device suitable fro the Danish part of the North Sea, according...

  6. CFD study of the overtopping discharge of the Wave Dragon wave energy converter

    DEFF Research Database (Denmark)

    Eskilsson, K.; Palm, J.; Kofoed, Jens Peter

    2015-01-01

    The Wave Dragon is a floating Wave Energy Converter (WEC) working by the overtopping principle. The overtopping discharge has been determined by model scale experiments in wave basins. In the present study we numerically simulate the overtopping behavior of the Wave Dragon device using a VOFbased...

  7. Structural Loads Analysis for Wave Energy Converters

    Energy Technology Data Exchange (ETDEWEB)

    van Rij, Jennifer A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-06-03

    This study explores and verifies the generalized body-modes method for evaluating the structural loads on a wave energy converter (WEC). Historically, WEC design methodologies have focused primarily on accurately evaluating hydrodynamic loads, while methodologies for evaluating structural loads have yet to be fully considered and incorporated into the WEC design process. As wave energy technologies continue to advance, however, it has become increasingly evident that an accurate evaluation of the structural loads will enable an optimized structural design, as well as the potential utilization of composites and flexible materials, and hence reduce WEC costs. Although there are many computational fluid dynamics, structural analyses and fluid-structure-interaction (FSI) codes available, the application of these codes is typically too computationally intensive to be practical in the early stages of the WEC design process. The generalized body-modes method, however, is a reduced order, linearized, frequency-domain FSI approach, performed in conjunction with the linear hydrodynamic analysis, with computation times that could realistically be incorporated into the WEC design process.

  8. Experimental Measurement of Wave Field Variations around Wave Energy Converter Arrays

    Directory of Open Access Journals (Sweden)

    Louise O’Boyle

    2017-01-01

    Full Text Available Wave energy converters (WECs inherently extract energy from incident waves. For wave energy to become a significant power provider in the future, large farms of WECs will be required. This scale of energy extraction will increase the potential for changes in the local wave field and coastal environment. Assessment of these effects is necessary to inform decisions on the layout of wave farms for optimum power output and minimum environmental impact, as well as on potential site selection. An experimental campaign to map, at high resolution, the wave field variation around arrays of 5 oscillating water column WECs and a methodology for extracting scattered and radiated waves is presented. The results highlight the importance of accounting for the full extent of the WEC behavior when assessing impacts on the wave field. The effect of radiated waves on the wave field is not immediately apparent when considering changes to the entire wave spectrum, nor when observing changes in wave climate due to scattered and radiated waves superimposed together. The results show that radiated waves may account for up to 50% of the effects on wave climate in the near field in particular operating conditions.

  9. Experimental Study on the Langlee Wave Energy Converter

    DEFF Research Database (Denmark)

    Lavelle, John; Kofoed, Jens Peter

    This report concerns the experimental study of the 1:20 scale model of the Langlee Wave Energy Converter (WEC) carried out at Aalborg University’s wave basin during the summer of 2010.......This report concerns the experimental study of the 1:20 scale model of the Langlee Wave Energy Converter (WEC) carried out at Aalborg University’s wave basin during the summer of 2010....

  10. Experimental Study of the Weptos Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Larsen, Tommy

    2012-01-01

    This paper presents the power performance results of the experimental study of the WEPTOS wave energy converter (WEC). This novel device combines an established and efficient wave energy absorbing mechanism with an adjustable structure that can regulate the amount of incoming wave energy and reduce...... loads in extreme wave conditions. This A-shaped floating structure absorbs the energy in the waves through a multitude of rotors, the shape of which is based on the renowned Salter’s Duck. These rotors pivot around a common axle, one for each leg of the structure, to which the rotors transfer...... the absorbed wave energy and which is connected to a common power take off system (one for each leg). The study investigates the performance of the device in a large range of wave states and estimates the performance in terms of mechanical power available to the power take off system of the WEPTOS WEC for two...

  11. Optimisation Of a Magnetostrictive Wave Energy Converter

    Science.gov (United States)

    Mundon, T. R.; Nair, B.

    2014-12-01

    Oscilla Power, Inc. (OPI) is developing a patented magnetostrictive wave energy converter aimed at reducing the cost of grid-scale electricity from ocean waves. Designed to operate cost-effectively across a wide range of wave conditions, this will be the first use of reverse magnetostriction for large-scale energy production. The device architecture is a straightforward two-body, point absorbing system that has been studied at length by various researchers. A large surface float is anchored to a submerged heave (reaction) plate by multiple taut tethers that are largely made up of discrete, robust power takeoff modules that house the magnetostrictive generators. The unique generators developed by OPI utilize the phenomenon of reverse magnetostriction, which through the application of load to a specific low cost alloy, can generate significant magnetic flux changes, and thus create power through electromagnetic induction. Unlike traditional generators, the mode of operation is low-displacement, high-force, high damping which in combination with the specific multi-tether configuration creates some unique effects and interesting optimization challenges. Using an empirical approach with a combination of numerical tools, such as ORCAFLEX, and physical models, we investigated the properties and sensitivities of this system arrangement, including various heave plate geometries, with the overall goal of identifying the mass and hydrodynamic parameters required for optimum performance. Furthermore, through a detailed physical model test program at the University of New Hampshire, we were able to study in more detail how the heave plate geometry affects the drag and added mass coefficients. In presenting this work we will discuss how alternate geometries could be used to optimize the hydrodynamic parameters of the heave plate, allowing maximum inertial forces in operational conditions, while simultaneously minimizing the forces generated in extreme waves. This presentation

  12. Study of the potential of wave energy in Malaysia

    Science.gov (United States)

    Tan, Wan Ching; Chan, Keng Wai; Ooi, Heivin

    2017-07-01

    Renewable energy is generally defined as energy harnessed from resources which are naturally replenished. It is an alternative to the current conventional energy sources such as natural gas, oil and coal, which are nonrenewable. Besides being nonrenewable, the harnessing of these resources generally produce by-products which could be potentially harmful to the environment. On the contrary, the generation from renewable energy does not pose environmental degradation. Some examples of renewable energy sources are sunlight, wind, tides, waves and geothermal heat. Wave energy is considered as one of the most promising marine renewable resources and is becoming commercially viable quicker than other renewable technologies at an astonishing growth rate. This paper illustrates the working principle of wave energy converter (WEC) and the availability of wave energy in Malaysia oceans. A good understanding of the behaviour of ocean waves is important for designing an efficient WEC as the characteristics of the waves in shallow and deep water are different. Consequently, wave energy converters are categorized into three categories on shore, near shore and offshore. Therefore, the objectives of this study is ought to be carried out by focusing on the formation of waves and wave characteristics in shallow as well as in deep water. The potential sites for implementation of wave energy harvesting technology in Malaysia and the wave energy available in the respective area were analysed. The potential of wave energy in Malaysia were tabulated and presented with theoretical data. The interaction between motion of waves and heave buoys for optimum phase condition by using the mass and diameter as the variables were investigated.

  13. Investigation of Wave Height Reduction behind the Wave Dragon Wave Energy Converters and Application in Santander, Spain

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Quvang Harck; Andersen, Thomas Lykke

    This paper deals with a case study on the wave height reduction behind floating Wave Dragon wave energy converters in Santander Bay, Spain. The study is performed using the MIKE21 Boussinesq model from DHI. The Wave Dragon transmission characteristics in the numerical wave propagation model...... are based on previously performed physical model tests in scale 1:51. Typical winter storm conditions are considered in the case study together with different stiffness in the mooring system of the floating device. From the study it is found that if multiple Wave Dragons are positioned in a farm the wave...

  14. Utilization of Double-Water-Chamber Seawall type for Wave Energy Extraction and Wave Dissipation

    OpenAIRE

    Husain, Firman

    2016-01-01

    Variation type and model of wave energy converter have been applied in many countries around the world in order to harvest the ocean wave power. A number of other devices were developing and testing by researchers in the experimental scale. In the present paper investigates double-water-chamber seawall performance for wave energy converter. The main body of water chamber seawall is like OWC structure. Savonius water turbine and guide vanes used to extract a wave power instead of air turbine a...

  15. Experimental Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter

    The Wave Dragon is a floating slack-moored Wave Energy Converter (WEC) of the overtopping type. Oncoming waves are focused by two wing reflectors towards the ramp of the device, surge-up and overtop into a reservoir placed at a higher level than the surface of the sea. The energy production takes...... at different scales and locations. A flexible and comprehensive modelling tool is therefore highly required. Wave Dragon produces power through different steps of energy conversion: 1. Primary energy conversion: overtopping – The energy content of the wave (partly in the kinetic and partly in the potential...... into mechanical energy as the water flows back to the sea, activating the lowhead hydro-turbines. 3. Tertiary energy conversion step: generators – The turbines shaft rotation activates the permanent magnet generators, converting mechanical energy into electrical energy. 4. Grid connection and delivery...

  16. Experiments with Point Absorber Type Wave Energy Converters in a Large-Scale Wave Basin

    DEFF Research Database (Denmark)

    Stratigaki, Vasiliki; Troch, Peter; Stallard, Tim

    2014-01-01

    Wave Energy Converters (WECs) extract energy from ocean waves and have the potential to produce a significant contribution of electricity from renewable sources. However, large "WEC farms" or "WEC arrays" are expected to have "WEC array effects", expressed as the impact of the WECs on the wave...... of geometric layout configurations and wave conditions. WEC response, wave induced forces on the WECs and wave field modifications have been measured. Each WEC consists of a buoy with diameter of 0.315 m. Power take-off is modeled by realizing friction based energy dissipation through damping of the WECs...... array effects and for validation and extension of numerical models. This model validation will enable optimization of the geometrical layout of WEC arrays for real applications and reduction of the cost of energy from wave energy systems....

  17. Diffuse Waves and Energy Densities Near Boundaries

    Science.gov (United States)

    Sanchez-Sesma, F. J.; Rodriguez-Castellanos, A.; Campillo, M.; Perton, M.; Luzon, F.; Perez-Ruiz, J. A.

    2007-12-01

    Green function can be retrieved from averaging cross correlations of motions within a diffuse field. In fact, it has been shown that for an elastic inhomogeneous, anisotropic medium under equipartitioned, isotropic illumination, the average cross correlations are proportional to the imaginary part of Green function. For instance coda waves are due to multiple scattering and their intensities follow diffusive regimes. Coda waves and the noise sample the medium and effectively carry information along their paths. In this work we explore the consequences of assuming both source and receiver at the same point. From the observable side, the autocorrelation is proportional to the energy density at a given point. On the other hand, the imaginary part of the Green function at the source itself is finite because the singularity of Green function is restricted to the real part. The energy density at a point is proportional with the trace of the imaginary part of Green function tensor at the source itself. The Green function availability may allow establishing the theoretical energy density of a seismic diffuse field generated by a background equipartitioned excitation. We study an elastic layer with free surface and overlaying a half space and compute the imaginary part of the Green function for various depths. We show that the resulting spectrum is indeed closely related to the layer dynamic response and the corresponding resonant frequencies are revealed. One implication of present findings lies in the fact that spatial variations may be useful in detecting the presence of a target by its signature in the distribution of diffuse energy. These results may be useful in assessing the seismic response of a given site if strong ground motions are scarce. It suffices having a reasonable illumination from micro earthquakes and noise. We consider that the imaginary part of Green function at the source is a spectral signature of the site. The relative importance of the peaks of

  18. Hydrodynamic Modelling and Layout Optimisation of Wave Energy Converter Arrays

    DEFF Research Database (Denmark)

    Ruiz, Pau Mercadé

    2017-01-01

    This PhD thesis explores mathematical models for recreation of small-amplitude ocean waves and their interaction with assemblies of oscillating wave energy converters. Underpinned by the simulation capabilities associated with these models, algorithms seeking optimal arrangements between devices...... in various positions and orientations are finally investigated. This thesis intends in this way to offer a practical approach to the analysis of wave energy converters when they operate together as an array and the optimal design of array layouts. The topics covered by the text include propagation of waves...... around solid bodies, generation of waves by oscillating bodies, wave transformation due to slowly-varying water depth conditions, basic principles of wave power extraction by oscillating bodies, and optimal formation of arrays of wave energy converters....

  19. Experimental Study on the Langlee Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Weisz, A.

    This report presents the results of an experimental study of the wave energy converting abilities of the Langlee wave energy converter (WEC). It focused mainly on evaluating the power generating capabilities of the device, including investigations of the following issues: Scaling ratiosPTO loadingWave...... height and wave period dependencyOblique incoming waves and directional spreading of waves (3D waves)Damping platesMooring forces and fixed structure setupPitch, surge and heave motion During the study the model supplied by the client (Langlee Wave Power AS) has been heavily instrumented - up to 23...... different instruments was deployed to measure and record data. Tests were performed at scales of 1:30 and 1:20 based on the realized reference wave states....

  20. Wave Energy Converter Annual Energy Production Uncertainty Using Simulations

    Directory of Open Access Journals (Sweden)

    Clayton E. Hiles

    2016-09-01

    Full Text Available Critical to evaluating the economic viability of a wave energy project is: (1 a robust estimate of the electricity production throughout the project lifetime and (2 an understanding of the uncertainty associated with said estimate. Standardization efforts have established mean annual energy production (MAEP as the metric for quantification of wave energy converter (WEC electricity production and the performance matrix approach as the appropriate method for calculation. General acceptance of a method for calculating the MAEP uncertainty has not yet been achieved. Several authors have proposed methods based on the standard engineering approach to error propagation, however, a lack of available WEC deployment data has restricted testing of these methods. In this work the magnitude and sensitivity of MAEP uncertainty is investigated. The analysis is driven by data from simulated deployments of 2 WECs of different operating principle at 4 different locations. A Monte Carlo simulation approach is proposed for calculating the variability of MAEP estimates and is used to explore the sensitivity of the calculation. The uncertainty of MAEP ranged from 2%–20% of the mean value. Of the contributing uncertainties studied, the variability in the wave climate was found responsible for most of the uncertainty in MAEP. Uncertainty in MAEP differs considerably between WEC types and between deployment locations and is sensitive to the length of the input data-sets. This implies that if a certain maximum level of uncertainty in MAEP is targeted, the minimum required lengths of the input data-sets will be different for every WEC-location combination.

  1. CFD study of the overtopping discharge of the Wave Dragon wave energy converter

    DEFF Research Database (Denmark)

    Eskilsson, K.; Palm, J.; Kofoed, Jens Peter

    2015-01-01

    The Wave Dragon is a floating Wave Energy Converter (WEC) working by the overtopping principle. The overtopping discharge has been determined by model scale experiments in wave basins. In the present study we numerically simulate the overtopping behavior of the Wave Dragon device using a VOFbased...... incompressible Euler/Navier-Stokes solver in the OpenFOAM® framework. We present simulations of: (i) a complete sea state for different crest heights, and (ii) regular waves for different wave conditions and crest heights. The simulations compare reasonably well with the experimental data, albeit the irregular...... wave simulations predict a larger overtopping discharge than observed in the experiments....

  2. Innovative rubble mound breakwaters for overtopping wave energy conversion

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Contestabile, Pasquale; Nørgaard, Jørgen Quvang Harck

    2014-01-01

    This paper intends contributing to the development of an economically and environmentally sustainable coastal infrastructure, which combines rubble mound breakwaters with Wave Energy Converters (WEC). The energy is produced by collecting wave overtopping in a front reservoir, which is returned...... experiments. The formulae are provided with the aim to be of direct use to engineers in the preliminary design of a first prototype of combined breakwater and wave energy converter....

  3. Layout Optimisation of Wave Energy Converter Arrays

    Directory of Open Access Journals (Sweden)

    Pau Mercadé Ruiz

    2017-08-01

    Full Text Available This paper proposes an optimisation strategy for the layout design of wave energy converter (WEC arrays. Optimal layouts are sought so as to maximise the absorbed power given a minimum q-factor, the minimum distance between WECs, and an area of deployment. To guarantee an efficient optimisation, a four-parameter layout description is proposed. Three different optimisation algorithms are further compared in terms of performance and computational cost. These are the covariance matrix adaptation evolution strategy (CMA, a genetic algorithm (GA and the glowworm swarm optimisation (GSO algorithm. The results show slightly higher performances for the latter two algorithms; however, the first turns out to be significantly less computationally demanding.

  4. Chorus Wave Energy Budget Analysis in the Earth's Radiation Belts

    Science.gov (United States)

    Blancarte, J.; Agapitov, O. V.; Mozer, F.

    2016-12-01

    Whistler-mode chorus emissions are important electromagnetic waves in the Earth's magnetosphere, where they continuously scatter and accelerate electrons of the outer radiation belt, controlling radiation hazards to satellites and astronauts. Here, we present an analysis of Van Allen Probes electric and magnetic field VLF waveform data, evaluating the wave energy budget, and show that a significant fraction of the energy corresponds to very oblique waves. Such waves, with a generally much smaller (up to 10 times) magnetic power than parallel waves, typically have comparable or even larger total energy. Very oblique waves may turn out to be a crucial agent of energy redistribution in the Earth's radiation belts and also provide nonlinear effects due to wave-particle interaction through the Landau resonance due to the significant electric field component parallel to the background magnetic field.

  5. Stakeholder requirements for commercially successful wave energy converter farms

    Energy Technology Data Exchange (ETDEWEB)

    Babarit, Aurélien; Bull, Diana; Dykes, Katherine; Malins, Robert; Nielsen, Kim; Costello, Ronan; Roberts, Jesse; Bittencourt Ferreira, Claudio; Kennedy, Ben; Weber, Jochem

    2017-12-01

    In this study, systems engineering techniques are applied to wave energy to identify and specify stakeholders' requirements for a commercially successful wave energy farm. The focus is on the continental scale utility market. Lifecycle stages and stakeholders are identified. Stakeholders' needs across the whole lifecycle of the wave energy farm are analyzed. A list of 33 stakeholder requirements are identified and specified. This list of requirements should serve as components of a technology performance level metric that could be used by investors and funding agencies to make informed decisions when allocating resources. It is hoped that the technology performance level metric will accelerate wave energy conversion technology convergence.

  6. Damping Profile Research for Corpower Ocean's Wave Energy Converter

    OpenAIRE

    Zhou, Tianzhi

    2016-01-01

    With increasing energy demanding and greenhouse gases from fossil fuel, the need to develop new ways to convert energy in sustainable methods is becoming more and more urgent. Corpower Ocean AB designed a point absorber type wave energy converter to harvest energy from surface wave. To maximize the energy output, phase and amplitude control of the converter are needed. Falnes and Budal proposed latching around 1980s which could deliver almost perfect phase and thusly boost power output, howev...

  7. Wave energy resource assessment and review of the technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wan Nik, W.B.: Sulaiman, O.O. [Maritime Technology Department, Universiti Malaysia Terengganu, 21030, Kuala Terengganu (Malaysia); Rosliza, R. [TATI University College, Teluk Kalong, 24000 Kemaman, Terengganu, (Malaysia); Prawoto, Y. [Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM, Skudai, Johor (Malaysia); Muzathik, A.M. [Institute of Technology, University of Moratuwa (Sri Lanka)

    2011-07-01

    Increase in human population has increased the demand for more energy. Technical improvement in transport and electrical appliances gives a lot of facilities to our life nowadays. Still we need to generate or convert this energy. Energy generation based on conventional technologies is always accompanied by environmental pollution. It gives overheating and greenhouse effects that later result in biosphere degradation. Nowadays sea wave energy is being increasingly regarded in many countries as a major and promising resource. It is renewable and environmentally friendly. In this paper wave parameters related to wave energy is analyzed. Then the paper describes the development of many different types of wave-energy converters. Several topics are addressed; the characterization of the wave energy resource, range of devices and how such devices can be organized into classes.

  8. Integrated analysis of energy transfers in elastic-wave turbulence.

    Science.gov (United States)

    Yokoyama, Naoto; Takaoka, Masanori

    2017-08-01

    In elastic-wave turbulence, strong turbulence appears in small wave numbers while weak turbulence does in large wave numbers. Energy transfers in the coexistence of these turbulent states are numerically investigated in both the Fourier space and the real space. An analytical expression of a detailed energy balance reveals from which mode to which mode energy is transferred in the triad interaction. Stretching energy excited by external force is transferred nonlocally and intermittently to large wave numbers as the kinetic energy in the strong turbulence. In the weak turbulence, the resonant interactions according to the weak turbulence theory produce cascading net energy transfer to large wave numbers. Because the system's nonlinearity shows strong temporal intermittency, the energy transfers are investigated at active and moderate phases separately. The nonlocal interactions in the Fourier space are characterized by the intermittent bundles of fibrous structures in the real space.

  9. DANWEC - Empirical Analysis of the Wave Climate at the Danish Wave Energy Centre

    DEFF Research Database (Denmark)

    Tetu, Amelie; Nielsen, Kim; Kofoed, Jens Peter

    The wave energy sector is at a development stage where real-sea testing is imperative. Dedicated test sites for wave energy converters (WECs) [1-6] are being established around Europe to facilitate sea trials. The Danish Wave Energy Centre (DanWEC) test site at Hanstholm has been the preferred test......, as for example scatter diagram (Hm0, Tz) will be analysed and wave power distribution given. Based on the data gathered so far a preliminary analysis of extreme events at the DanWEC test site will be presented. Deployment, control strategies and O&M strategies of wave energy converters are sensitive to the wave...... site for several Danish WECs. In 2013 DanWEC has received Greenlab funding from the EUDP programme to establish the site including more detailed information on its wave climate and bathymetry and seabed conditions. The project “Resource Assessment, Forecasts and WECs O&M strategies at DanWEC and beyond...

  10. Climate change impact on wave energy in the Persian Gulf

    Science.gov (United States)

    Kamranzad, Bahareh; Etemad-Shahidi, Amir; Chegini, Vahid; Yeganeh-Bakhtiary, Abbas

    2015-06-01

    Excessive usage of fossil fuels and high emission of greenhouse gases have increased the earth's temperature, and consequently have changed the patterns of natural phenomena such as wind speed, wave height, etc. Renewable energy resources are ideal alternatives to reduce the negative effects of increasing greenhouse gases emission and climate change. However, these energy sources are also sensitive to changing climate. In this study, the effect of climate change on wave energy in the Persian Gulf is investigated. For this purpose, future wind data obtained from CGCM3.1 model were downscaled using a hybrid approach and modification factors were computed based on local wind data (ECMWF) and applied to control and future CGCM3.1 wind data. Downscaled wind data was used to generate the wave characteristics in the future based on A2, B1, and A1B scenarios, while ECMWF wind field was used to generate the wave characteristics in the control period. The results of these two 30-yearly wave modelings using SWAN model showed that the average wave power changes slightly in the future. Assessment of wave power spatial distribution showed that the reduction of the average wave power is more in the middle parts of the Persian Gulf. Investigation of wave power distribution in two coastal stations (Boushehr and Assalouyeh ports) indicated that the annual wave energy will decrease in both stations while the wave power distribution for different intervals of significant wave height and peak period will also change in Assalouyeh according to all scenarios.

  11. Coordinated Control of Wave Energy Converters Subject to Motion Constraints

    Directory of Open Access Journals (Sweden)

    Liguo Wang

    2016-06-01

    Full Text Available In this paper, a generic coordinated control method for wave energy converters is proposed, and the constraints on motion amplitudes and the hydrodynamic interaction between converters are considered. The objective of the control problem is to maximize the energy converted from ocean waves, and this is achieved by coordinating the power take-off (PTO damping of each wave energy converter in the frequency domain in each sea state. In a case study, a wave energy farm consisting of four converters based on the concept developed by Uppsala University is studied. In the solution, motion constraints, including constraints on the amplitudes of displacement and velocity, are included. Twelve months of sea states, based on measured wave data at the Lysekil test site on the Swedish west coast, are used in the simulation to evaluate the performance of the wave energy farm using the new method. Results from the new coordinated control method and traditional control method are compared, indicating that the coordinated control of wave energy converters is an effective way to improve the energy production of wave energy farm in harmonic waves.

  12. Real-time Ocean Wave Prediction for Optimal Performance of a Wave Energy Converter

    Science.gov (United States)

    Cavaglieri, Daniele; Bewley, Thomas

    2013-11-01

    In recent years, there has been a growing interest in renewable energy. Among all the available possibilities, wave energy conversion, due to the huge availability of energy that the ocean could provide, represents nowadays one of the most promising solutions. However, the efficiency of a wave energy converter for ocean wave energy harvesting is still far from making it competitive with more mature fields of renewable energy, such as solar and wind energy. One of the main problems is related to the inability to accurately predict the profile of oncoming waves approaching the wave energy converter. For this reason, we developed a new hybrid method for state estimation of nonlinear systems, which is based on a variational formulation of an ensemble smoother, combined with the formulation of the ensemble Kalman smoother. This method has been employed for the optimal forecasting of ocean waves via sensors placed on an array of wave energy converters. The coupled simulation of ocean waves and energy devices has been carried out leveraging a nonlinear High Order Spectral code.

  13. Specification of Instrumentation of Multi MW Wave Dragon Offshore Wave Energy Converter

    DEFF Research Database (Denmark)

    Gilling, Lasse; Kofoed, Jens Peter

    Wave Dragon is a wave energy converter of the overtopping type and is described e.g. in Tedd et. al. (2006). The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based...

  14. Wave Energy Dissipation of Waves Breaking on a Reef with a Steep Front Slope

    DEFF Research Database (Denmark)

    Jensen, M.S.; Burcharth, Hans F.; Brorsen, Michael

    2005-01-01

    The Transformation of waves propagating over a steep bottom slope is of great importance regarding the coastal processes in the near-shore area.This study will contribute with tools to predict the dissipated wave energy for irregular waves passing a steep submerged slope. An extensive number...... of test with regular and irregular waves breaking over a steep bottom slope have been performed in the Hydraulics & Coastal Engineering Laboratory, Aalborg University. Based on these experimental data formulae have been developed capable of predicting he transmitted wave energy over steep slopes....

  15. Wave energy budget analysis in the Earth's radiation belts uncovers a missing energy.

    Science.gov (United States)

    Artemyev, A V; Agapitov, O V; Mourenas, D; Krasnoselskikh, V V; Mozer, F S

    2015-05-15

    Whistler-mode emissions are important electromagnetic waves pervasive in the Earth's magnetosphere, where they continuously remove or energize electrons trapped by the geomagnetic field, controlling radiation hazards to satellites and astronauts and the upper-atmosphere ionization or chemical composition. Here, we report an analysis of 10-year Cluster data, statistically evaluating the full wave energy budget in the Earth's magnetosphere, revealing that a significant fraction of the energy corresponds to hitherto generally neglected very oblique waves. Such waves, with 10 times smaller magnetic power than parallel waves, typically have similar total energy. Moreover, they carry up to 80% of the wave energy involved in wave-particle resonant interactions. It implies that electron heating and precipitation into the atmosphere may have been significantly under/over-valued in past studies considering only conventional quasi-parallel waves. Very oblique waves may turn out to be a crucial agent of energy redistribution in the Earth's radiation belts, controlled by solar activity.

  16. Hanstholm phase 2B. Offshore wave energy test 1994 - 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The wave power converter consists of a float 2.5 meter in diameter, connected by a rope to a seabed-mounted piston pump, installed on 25 meter deep water 2,5 km offshore Hanstholm, Denmark. The converter is designed to absorb an average maximum power of 1 kW. Measured data in real sea conditions are compared to results based on computer simulations and previous tank testing. Losses caused by rope elasticity and hysteresis, friction in the pump and back flow through the valves are assessed. The economic perspectives of a large wave power plant are presented, based on a revised prototype incorporating the results and experience gained during the test period. The wave energy conversion test `Hanstholm phase 2B` has showed, that it it technically possible to exploit the offshore wave energy resource. This source of energy could become attractive for commercial enterprise. The wave power converter demonstrated a reliable performance over a period of nine months. It produced energy under all wave conditions and survived storm waves of 9,6 m. A 300 MW wave power plant in the Danish part of the North sea is estimated to produce electricity at a cost between 2,1 - 2,4 DKK/kWh. The electrical transmission to shore contribute to approximately 20% of the cost. New data predict a potential of 23 kW per meter wave front. The energy plan Energy 21 proposed by the Danish Department of Energy, includes a scenario incorporating wave energy in the energy system year 2030. A strategy for the development of wave energy, has been proposed as part of the project OWEC-1 supported by the European Joule R and D programme. A proposal for future Danish initiatives to develop second generation point absorber systems is outlined. (ARW) 29 refs.

  17. Loss of energy of internal solitary wave over underwater obstacle

    Science.gov (United States)

    Talipova, Tatiana; Terletska, Katherina; Maderich, Vladimir; Brovchenko, Igor; Jung, Kyung-Tae; Pelinovsky, Efim; Grimshaw, Roger

    2014-05-01

    Internal waves are considered as the main reason of mixing of the stratified ocean waters. They loss their energy for mixing processes when dissipate on the ocean shelves. The elementary act of interaction of an internal solitary wave with a bottom step is studied to estimate the energy loss of an incident internal solitary wave. It is studied numerically in a computing tank in the approximation of two-layer flow within the full Navier - Stokes equations. Five different regimes of internal solitary wave interaction were identified within the full range of ratios of height of bottom layer after the step to the incident wave amplitude: (1) weak interaction, when wave dynamics can fully described by weakly nonlinear theory, (2) moderate interaction when wave breaking mechanism over the step is mainly shear instability, (3) strong interaction when supercritical flow in the step vicinity results in backward jet and vortices for depression waves and in a forward moving vortex (bolus) transporting dense fluid on the step, (4) transitional regime of interaction at the step height between splash on the step and (5) complete reflection from the step, and reflection regime when almost all energy transfers to the energy of reflected wave. The mechanism of KH instability takes place for reasonable amplitude waves of both depression and elevation during interaction with the bottom step for all regimes except regime (1). For this two-layer flow the energy loss due to an internal solitary wave interacting with the bottom step does not exceed 50% of the energy of the incident wave. The maximum of energy loss an elevation incident wave is reached when the ratio of the height of bottom layer after the step to incident wave amplitude equals zero. For an incident depression wave this ratio in maximum of energy loss is close to one. Self-similarities of the energy loss versus the ratio of the height of upper layer after the step to incident wave amplitude take place for the values more

  18. Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Mirko Previsic

    2010-06-17

    Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industry’s development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two

  19. Short term wave forecasting, using digital filters, for improved control of Wave Energy Converters

    DEFF Research Database (Denmark)

    Tedd, James; Frigaard, Peter

    2007-01-01

    experimentally. Results are shown form measurements taken on the Wave Dragon prototype device, a floating overtopping device situated in Northern Denmark. In this case the method is able to accurately predict the surface elevation at the device 11.2 seconds before the measurement is made. This is sufficient......This paper presents a Digital Filter method for real time prediction of waves incident upon a Wave Energy device. The method transforms waves measured at a point ahead of the device, to expected waves incident on the device. The relationship between these incident waves and power capture is derived...

  20. On Mooring Solutions for Large Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Ferri, Francesco

    2017-01-01

    The present paper describes the work carried out in the project ’Mooring Solutions for Large Wave Energy Converters’, which is a Danish research project carried out in a period of three years from September 2014, with the aim of reducing cost of the moorings for four wave energy converters and im...

  1. An Appraisal of the DEXA Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report has been requested by VækstFonden and aims at giving an overview of the experimental tests and a general appraisal of the DEXA wave energy converter (WEC). The reported results and findings were obtained during previously performed experimental tests by the Wave Energy Research Group...

  2. Design Specifications for the Hanstholm WEPTOS Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Larsen, Tommy

    2012-01-01

    The WEPTOS wave energy converter (WEC) is a novel device that combines an established and efficient wave energy absorbing mechanism with a smart structure, which can regulate the amount of incoming wave energy and reduce loads in extreme wave conditions. This adjustable A-shaped slack......-moored and floating structure absorbs the energy of the waves through a multitude of rotors. The shape of the rotors is based on the renowned Salter’s Duck. On each leg, the rotors pivot around a common axle, through which the rotors transfer the absorbed power to a common power take off system. The study...... the rotational speed and transmitted torque (and hereby power) to the PTO system using different PTO control strategies, the impact of fluctuations of the available mechanical power and the effect of limiting the PTO capacity on the annual energy production. Acquisition of structural forces includes mooring...

  3. Measurements of Wave Power in Wave Energy Converter Effectiveness Evaluation

    Science.gov (United States)

    Berins, J.; Berins, J.; Kalnacs, A.

    2017-08-01

    The article is devoted to the technical solution of alternative budget measuring equipment of the water surface gravity wave oscillation and the theoretical justification of the calculated oscillation power. This solution combines technologies such as lasers, WEB-camera image digital processing, interpolation of defined function at irregular intervals, volatility of discrete Fourier transformation for calculating the spectrum.

  4. Measurements of Wave Power in Wave Energy Converter Effectiveness Evaluation

    Directory of Open Access Journals (Sweden)

    Berins J.

    2017-08-01

    Full Text Available The article is devoted to the technical solution of alternative budget measuring equipment of the water surface gravity wave oscillation and the theoretical justification of the calculated oscillation power. This solution combines technologies such as lasers, WEB-camera image digital processing, interpolation of defined function at irregular intervals, volatility of discrete Fourier transformation for calculating the spectrum.

  5. Enhancing Wave Energy Competitiveness through Co-Located Wind and Wave Energy Farms. A Review on the Shadow Effect

    Directory of Open Access Journals (Sweden)

    Sharay Astariz

    2015-07-01

    Full Text Available Wave energy is one of the most promising alternatives to fossil fuels due to the enormous available resource; however, its development may be slowed as it is often regarded as uneconomical. The largest cost reductions are expected to be obtained through economies of scale and technological progress. In this sense, the incorporation of wave energy systems into offshore wind energy farms is an opportunity to foster the development of wave energy. The synergies between both renewables can be realised through these co-located energy farms and, thus, some challenges of offshore wind energy can be met. Among them, this paper focuses on the longer non-operational periods of offshore wind turbines—relative to their onshore counterparts—typically caused by delays in maintenance due to the harsh marine conditions. Co-located wave energy converters would act as a barrier extracting energy from the waves and resulting in a shielding effect over the wind farm. On this basis, the aim of this paper is to analyse wave energy economics in a holistic way, as well as the synergies between wave and offshore wind energy, focusing on the shadow effect and the associated increase in the accessibility to the wind turbines.

  6. Electricity from wave and tide an introduction to marine energy

    CERN Document Server

    Lynn, Paul A

    2014-01-01

    This is a concise yet technically authoritative overview of modern marine energy devices with the goal of sustainable electricity generation. With 165 full-colour illustrations and photographs of devices at an advanced stage, the book provides inspiring case studies of today's most promising marine energy devices and developments, including full-scale grid-connected prototypes tested in sea conditions. It also covers the European Marine Energy Centre (EMEC) in Orkney, Scotland, where many of the devices are assessed. Topics discussed: global resources - drawing energy from the World's waves and tides history of wave and tidal stream systems theoretical background to modern developments conversion of marine energy into grid electricity modern wave energy converters and tidal stream energy converters. This book is aimed at a wide readership including professionals, policy makers and employees in the energy sector needing an introduction to marine energy. Its descriptive style and technical level will also appea...

  7. 78 FR 40132 - Wave Energy Converter Prize Administration Webinar

    Science.gov (United States)

    2013-07-03

    ... alternative strategies and approaches for the prize administration. A multi stage-gate challenge structure... of Energy Efficiency and Renewable Energy Wave Energy Converter Prize Administration Webinar AGENCY... Energy Converter Prize Administration''. The Office is planning a webinar in advance of any potential FOA...

  8. Wave Climate Resource Analysis Based on a Revised Gamma Spectrum for Wave Energy Conversion Technology

    Directory of Open Access Journals (Sweden)

    Jeremiah Pastor

    2016-12-01

    Full Text Available In order to correctly predict and evaluate the response of wave energy converters (WECs, an accurate representation of wave climate resource is crucial. This paper gives an overview of wave resource modeling techniques and applies a methodology to estimate the naturally available and technically recoverable resource in a given deployment site. The methodology was initially developed by the Electric Power Research Institute (EPRI, which uses a modified gamma spectrum to interpret sea state hindcast parameter data produced by National Oceanic and Atmospheric Administration’s (NOAA’s WaveWatch III. This gamma spectrum is dependent on the calibration of two variables relating to the spectral width parameter and spectral peakedness parameter. In this study, this methodology was revised by the authors to increase its accuracy in formulating wavelength. The revised methodology shows how to assess a given geographic area’s wave resource based on its wave power density and total annual wave energy flux.

  9. A wave model test bed study for wave energy resource characterization

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhaoqing; Neary, Vincent S.; Wang, Taiping; Gunawan, Budi; Dallman, Annie R.; Wu, Wei-Cheng

    2017-12-01

    This paper presents a test bed study conducted to evaluate best practices in wave modeling to characterize energy resources. The model test bed off the central Oregon Coast was selected because of the high wave energy and available measured data at the site. Two third-generation spectral wave models, SWAN and WWIII, were evaluated. A four-level nested-grid approach—from global to test bed scale—was employed. Model skills were assessed using a set of model performance metrics based on comparing six simulated wave resource parameters to observations from a wave buoy inside the test bed. Both WWIII and SWAN performed well at the test bed site and exhibited similar modeling skills. The ST4 package with WWIII, which represents better physics for wave growth and dissipation, out-performed ST2 physics and improved wave power density and significant wave height predictions. However, ST4 physics tended to overpredict the wave energy period. The newly developed ST6 physics did not improve the overall model skill for predicting the six wave resource parameters. Sensitivity analysis using different wave frequencies and direction resolutions indicated the model results were not sensitive to spectral resolutions at the test bed site, likely due to the absence of complex bathymetric and geometric features.

  10. Recent Developments of Wave Energy Utilization in Denmark

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Kramer, Morten

    2006-01-01

    by a more thorough description of three ongoing projects. These are Wave Dragon, Wave Star and Seawave Slot-cone Generator. Common for these projects are that they are being, or will soon be, tested in real sea and have benefited from the Danish Wave Energy Program. The work by the department......This paper aims at giving an overview of the developments researchers at the Department of Civil Engineering, Aalborg University, Denmark (DCE), have been involved in within the field of wave energy utilization in Denmark over the past decade. At first a general introduction is given followed...

  11. Wave energy dissipation by intertidal sand waves on a mixed-sediment Beach

    Science.gov (United States)

    Adams, P.; Ruggiero, P.

    2006-01-01

    Within the surf zone, the energy expended by wave breaking is strongly influenced by nearshore bathymetry, which is often linked to the character and abundance of local sediments. Based upon a continuous, two year record of Argus Beach Monitoring System (ABMS) data on the north shore of Kachemak Bay in southcentral Alaska, we model the enhancement of wave energy dissipation by the presence of intertidal sand waves. Comparison of model results from simulations in the presence and absence of sand waves illustrates that these ephemeral morphological features can offer significant protection to the backing beach and sea cliff through two mechanisms: (1) by moving the locus of wave breaking seaward and (2) by increasing energy expenditure associated with the turbulence of wave breaking. Copyright ASCE 2006.

  12. Numerical Modeling of a Wave Energy Point Absorber

    DEFF Research Database (Denmark)

    Hernandez, Lorenzo Banos; Frigaard, Peter; Kirkegaard, Poul Henning

    2009-01-01

    The present study deals with numerical modelling of the Wave Star Energy WSE device. Hereby, linear potential theory is applied via a BEM code on the wave hydrodynamics exciting the floaters. Time and frequency domain solutions of the floater response are determined for regular and irregular seas....... Furthermore, these results are used to estimate the power and the energy absorbed by a single oscillating floater. Finally, a latching control strategy is analysed in open-loop configuration for energy maximization....

  13. Wave Energy Resource along the Coast of Santa Catarina (Brazil

    Directory of Open Access Journals (Sweden)

    Pasquale Contestabile

    2015-12-01

    Full Text Available Brazil has one of the largest electricity markets in South America, which needs to add 6000 MW of capacity every year in order to satisfy growing the demand from an increasing and more prosperous population. Apart from biomass, no other renewable energy sources, besides hydroelectricity, play a relevant role in the energy mix. The potential for wind and wave energy is very large. Brazil's Santa Catarina state government is starting a clean energy program in the state, which is expected to bring more than 1 GW of capacity. Assessment of wave energy resources is needed along the coastline. This work studied the potential wave energy along the north-central coasts of Santa Catarina, in Southern Brazil, by analysis of the hindcast data from the European Centre for Medium-Range Weather Forecasts (ECMWF. The annual offshore wave power was found to be equal to 15.25 kW/m, the bulk of which is provided by southeastern waves. The nearshore energetic patterns were studied by means of a numerical coastal propagation model (Mike21 SW. The mean wave power of 20 m isobaths is 11.43 kW/m. Supplementary considerations are drawn on realistic perspectives for wave energy converters installations.

  14. ENERGY CONTENT AND PROPAGATION IN TRANSVERSE SOLAR ATMOSPHERIC WAVES

    Energy Technology Data Exchange (ETDEWEB)

    Goossens, M.; Van Doorsselaere, T. [Centre for mathematical Plasma Astrophysics, Mathematics Department, Celestijnenlaan 200B bus 2400, B-3001 Heverlee (Belgium); Soler, R. [Solar Physics Group, Departament de Fisica, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain); Verth, G., E-mail: tom.vandoorsselaere@wis.kuleuven.be [Solar Physics and Space Plasma Research Centre (SP2RC), School of Mathematics and Statistics, University of Sheffield, Hounsfield Road, Hicks Building, Sheffield S3 7RH (United Kingdom)

    2013-05-10

    Recently, a significant amount of transverse wave energy has been estimated propagating along solar atmospheric magnetic fields. However, these estimates have been made with the classic bulk Alfven wave model which assumes a homogeneous plasma. In this paper, the kinetic, magnetic, and total energy densities and the flux of energy are computed for transverse MHD waves in one-dimensional cylindrical flux tube models with a piecewise constant or continuous radial density profile. There are fundamental deviations from the properties for classic bulk Alfven waves. (1) There is no local equipartition between kinetic and magnetic energy. (2) The flux of energy and the velocity of energy transfer have, in addition to a component parallel to the magnetic field, components in the planes normal to the magnetic field. (3) The energy densities and the flux of energy vary spatially, contrary to the case of classic bulk Alfven waves. This last property has the important consequence that the energy flux computed with the well known expression for bulk Alfven waves could overestimate the real flux by a factor in the range 10-50, depending on the flux tube equilibrium properties.

  15. Modelling and Testing of Wave Dragon Wave Energy Converter Towards Full Scale Deployment

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano

    This doctoral thesis is framed into the development process of the Wave Dragon wave energy converter (WEC). Wave energy is a vast and untapped resource with the potential of becoming an important contributor to the World energy mix, although presently its commercial exploitation has been hindered....... This is mainly due to the development of an updated overtopping model specifically suited to Wave Dragon, which allows greater quality to predictions of the primary energy absorption of the device compared to previous versions. At the same time an equitable approach has been described and used in the performance...... by the difficulties of developers to demonstrate the technology feasibility at full-scale, first of all caused by lack of finance of full-scale demonstration units. Although having a large potential for the cost-effective generation of clean and renewable electricity, Wave Dragon is currently in a pre...

  16. Life cycle assessment of the wave energy converter: Wave Dragon

    DEFF Research Database (Denmark)

    Hans Chr., Sørensen; Stefan, Naef; Stefan, Anderberg

    Any power production technology should be able to demonstrate that it's able to comply with current and future environmental regulation and that it demonstrates a considerable surplus in the energy balance being a part of the entire power system. This means that the energy used throughout all...... the lifecycle stages; from provision of materials over manufacturing of components and assembly, to deployment and use and eventually the disposal stage, is considerably less than the energy produced by the devise during its use/production stage....

  17. Model Predictive Control of Buoy Type Wave Energy Converter

    DEFF Research Database (Denmark)

    Soltani, Mohsen; Sichani, Mahdi Teimouri; Mirzaei, Mahmood

    2014-01-01

    The paper introduces the Wavestar wave energy converter and presents the implementation of model predictive controller that maximizes the power generation. The ocean wave power is extracted using a hydraulic electric generator which is connected to an oscillating buoy. The power generator...... is an additive device attached to the buoy which may include damping, stiffness or similar terms hence will affect the dynamic motion of the buoy. Therefore such a device can be seen as a closed-loop controller. The objective of the wave energy converter is to harvest as much energy from sea as possible...

  18. Transmission of wave energy through an offshore wind turbine farm

    DEFF Research Database (Denmark)

    Christensen, Erik Damgaard; Johnson, Martin; Sørensen, Ole Rene

    2013-01-01

    The transmission of wave energy passing an offshore wind farm is studied. Three effects that can change the wave field are analysed, which is the A) energy dissipation due to drag resistance, B) wave reflection/diffraction from structures, and C) the effect of a modified wind field inside...... and on the lee side of the wind farm. The drag dissipation, A), is quantified by a quadratic resistance law. The effect of B) is parameterised based on 1st order potential theory. A method to find the amount of reflected and transmitted wave energy is developed based on the panel method WAMIT™ and a radiation...... condition at infinity. From airborne and Satellite SAR (Synthetic Aperture Radar) a model has been derived for the change of the water surface friction C) inside and on the lee side of the offshore wind farm. The effects have been implemented in a spectral wind wave model,MIKE21 SW, and a parametric study...

  19. Optimal Discrete PTO Force Point Absorber Wave Energy Converters in Regular Waves

    DEFF Research Database (Denmark)

    Hansen, Anders Hedegaard; Pedersen, Henrik C.

    2013-01-01

    For ocean wave energy converters (WECs) to become a cost-effective alternative in the energy production system a large increase in the conversion efficiency is needed. Fluid power technology is the leading technology for the Power Take- Off (PTO) system of wave energy converters. However...... of discrete force systems for PTO, by focusing on how to choose the optimal PTO force levels and force profile when seeking to increase energy harvesting. The work concerns point absorber WECs and utilises a simple float model based on linear wave theory. Utilising the principle of superposition...... and the Laplace transform a solution of the float movement is found when subjected an incoming wave and a discrete PTO force. Finally an optimisation leads to the force profile implying the highest harvested energy....

  20. Nonlinear Passive Control of a Wave Energy Converter Subject to Constraints in Irregular Waves

    Directory of Open Access Journals (Sweden)

    Liguo Wang

    2015-06-01

    Full Text Available This paper investigates a passive control method of a point absorbing wave energy converter by considering the displacement and velocity constraints under irregular waves in the time domain. A linear generator is used as a power take-off unit, and the equivalent damping force is optimized to improve the power production of the wave energy converter. The results from nonlinear and linear passive control methods are compared, and indicate that the nonlinear passive control method leads to the excitation force in phase with the velocity of the converter that can significantly improve the energy production of the converter.

  1. Simplified Design Procedures for Moorings of Wave-Energy Converters

    DEFF Research Database (Denmark)

    Bergdahl, Lars; Kofoed, Jens Peter

    The goal of the report is that the reader shall be able to self-dependently make a first, preliminary analysis of wave-induced horizontal loads, motions and mooring forces for a moored floating wave energy device. Necessary prerequisites to attain that goal are the understanding of the physical...

  2. Thermal effects on parallel resonance energy of whistler mode wave

    Indian Academy of Sciences (India)

    Abstract. In this short communication, we have evaluated the effect of thermal velocity of the plasma particles on the energy of resonantly interacting energetic electrons with the propagating whistler mode waves as a function of wave frequency and L-value for the normal and disturbed magnetospheric conditions. During the ...

  3. Thermoelastic waves without energy dissipation in an elastic plate to ...

    African Journals Online (AJOL)

    The linear theory of thermoelasticity without energy dissipation for isotropic and homogeneous materials is employed to study waves in an elastic plate. The waves are assumed to arise out of a ramp-type stress on the plate's boundary which is maintained at constant temperature. Laplace transforms are used to solve the ...

  4. Wave Loadings Acting on an Innovative Breakwater for Energy Production

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Ciardulli, F.; Buccino, M.

    2011-01-01

    The paper reports on 2D small scale experiments conducted to investigate wave loadings acting on a pilot project of device for the conversion of wave energy into electricity. The conversion concept is based on the overtopping principle and the structure is worldwide known with the acronym SSG...

  5. Determination of wave energy potential of black sea

    NARCIS (Netherlands)

    Bingölbali, Bilal; Akpınar, Adem; van Vledder, G.P.

    2016-01-01

    This study aims to assess wave energy potential and its long-term spatial and temporal characteristics in the Black Sea within the TUBITAK research project (Akpınar et al., 2015). With this purpose, a wave model (SWAN model version 41.01 driven by the CFSR winds) over the entire Black Sea was

  6. Energy Conversion: A Comparison of Fix- and Self-Referenced Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Wanan Sheng

    2016-12-01

    Full Text Available The paper presents an investigation of fix-referenced and self-referenced wave energy converters and a comparison of their corresponding wave energy conversion capacities from real seas. For conducting the comparisons, two popular wave energy converters, point absorber and oscillating water column, and their power conversion capacities in the fixed-referenced and self-referenced forms have been numerically studied and compared. In the numerical models, the device’s power extractions from seas are maximized using the correspondingly optimized power take-offs in different sea states, thus their power conversion capacities can be calculated and compared. From the comparisons and analyses, it is shown that the energy conversion capacities of the self-referenced devices can be significantly increased if the motions of the device itself can be utilized for wave energy conversion; and the self-referenced devices can be possibly designed to be compliant in long waves, which could be a very beneficial factor for device survivability in the extreme wave conditions (normally long waves. In this regards, the self-referenced WECs (wave energy converters may be better options in terms of wave energy conversion from the targeted waves in seas (frequently the most occurred, and in terms of the device survivability, especially in the extreme waves when compared to the fix-referenced counterparts.

  7. Misconceptions about the energy of waves in a strained string

    Science.gov (United States)

    Butikov, Eugene I.

    2012-09-01

    The localization of the elastic potential energy associated with transverse and longitudinal waves in a stretched string is discussed. Some misunderstandings about different expressions for the density of potential energy encountered in the literature are clarified. The widespread opinion regarding the inherent ambiguity of the density of elastic potential energy is criticized.

  8. Internal wave energy radiated from a turbulent mixed layer

    Energy Technology Data Exchange (ETDEWEB)

    Munroe, James R., E-mail: jmunroe@mun.ca [Department of Physics and Physical Oceanography, Memorial University of Newfoundland, St. John' s, Newfoundland A1B 3X7 (Canada); Sutherland, Bruce R., E-mail: bsuther@ualberta.ca [Departments of Physics and Earth and Atmospheric Sciences, University of Alberta, Edmonton, Alberta T6G 2R3 (Canada)

    2014-09-15

    We examine mixed-layer deepening and the generation of internal waves in stratified fluid resulting from turbulence that develops in response to an applied surface stress. In laboratory experiments the stress is applied over the breadth of a finite-length tank by a moving roughened conveyor belt. The turbulence in the shear layer is characterized using particle image velocimetry to measure the kinetic energy density. The internal waves are measured using synthetic schlieren to determine their amplitudes, frequencies, and energy density. We also perform fully nonlinear numerical simulations restricted to two dimensions but in a horizontally periodic domain. These clearly demonstrate that internal waves are generated by transient eddies at the integral length scale of turbulence and which translate with the background shear along the base of the mixed layer. In both experiments and simulations we find that the energy density of the generated waves is 1%–3% of the turbulent kinetic energy density of the turbulent layer.

  9. Model Predictive Control of Buoy Type Wave Energy Converter

    DEFF Research Database (Denmark)

    Soltani, Mohsen N.; Sichani, Mahdi T.; Mirzaei, Mahmood

    2014-01-01

    The paper introduces the Wavestar wave energy converter and presents the implementation of model predictive controller that maximizes the power generation. The ocean wave power is extracted using a hydraulic electric generator which is connected to an oscillating buoy. The power generator...... is an additive device attached to the buoy which may include damping, stiffness or similar terms hence will affect the dynamic motion of the buoy. Therefore such a device can be seen as a closed-loop controller. The objective of the wave energy converter is to harvest as much energy from sea as possible....... This approach is then taken into account and an MPC controller is designed for a model wave energy converter and implemented on a numerical example. Further, the power outtake of this controller is compared to the optimal controller as an indicator of the performance of the designed controller....

  10. National-scale wave energy resource assessment for Australia

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Michael G.; Heap, Andrew D. [Geoscience Australia, Marine and Coastal Environment Group, GPO Box 378, Canberra, ACT 2601 (Australia)

    2010-08-15

    A nationally consistent wave resource assessment is presented for Australian shelf (<300 m) waters. Wave energy and power were derived from significant wave height and period, and wave direction hindcast using the AusWAM model for the period 1 March 1997 to 29 February 2008 inclusive. The spatial distribution of wave energy and power is available on a 0.1 grid covering 110-156 longitude and 7-46 latitude. Total instantaneous wave energy on the entire Australian shelf is on average 3.47 PJ. Wave power is greatest on the 3000 km-long southern Australian shelf (Tasmania/Victoria, southern Western Australia and South Australia), where it widely attains a time-average value of 25-35 kW m{sup -1} (90th percentile of 60-78 kW m{sup -1}), delivering 800-1100 GJ m{sup -1} of energy in an average year. New South Wales and southern Queensland shelves, with moderate levels of wave power (time-average: 10-20 kW m{sup -1}; 90th percentile: 20-30 kW m{sup -1}), are also potential sites for electricity generation due to them having a similar reliability in resource delivery to the southern margin. Time-average wave power for most of the northern Australian shelf is <10 kW m{sup -1}. Seasonal variations in wave power are consistent with regional weather patterns, which are characterised by winter SE trade winds/summer monsoon in the north and winter temperate storms/summer sea breezes in the south. The nationally consistent wave resource assessment for Australian shelf waters can be used to inform policy development and site-selection decisions by industry. (author)

  11. Turbine Control Strategy using Wave Prediction to Optimise Power Take Off of Overtopping Wave Energy Converters

    DEFF Research Database (Denmark)

    Tedd, James; Knapp, Wilfried; Frigaard, Peter

    2005-01-01

    This paper presents the control strategy used on Wave Dragon overtopping wave energy converter. The nature of overtopping requires that for optimum performance the water level in the reservoir must be controlled by controlling the turbine outflows. A history of the simulations performed is included...

  12. Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Pecher, Arthur; Kofoed, Jens Peter

    2010-01-01

    The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions...

  13. Wave energy fluxes and multi-decadal shoreline changes

    DEFF Research Database (Denmark)

    Kabuth, Alina Kristin; Kroon, Aart

    2014-01-01

    Spatial patterns of multidecadal shoreline changes in two microtidal, low-energetic embayments of southern Zealand, Denmark, were investigated by using the directional distribution of wave energy fluxes. The sites include a barrier island system attached to moraine bluffs, and a recurved spit...... variability of directional distributions of wave energy fluxes furthermore outlined potential sediment sources and sinks for the evolution of the barrier island system and for the evolution of the recurved spit....

  14. Model Predictive Control of a Wave Energy Converter

    DEFF Research Database (Denmark)

    Andersen, Palle; Pedersen, Tom Søndergård; Nielsen, Kirsten Mølgaard

    2015-01-01

    In this paper reactive control and Model Predictive Control (MPC) for a Wave Energy Converter (WEC) are compared. The analysis is based on a WEC from Wave Star A/S designed as a point absorber. The model predictive controller uses wave models based on the dominating sea states combined with a model...... connecting undisturbed wave sequences to sequences of torque. Losses in the conversion from mechanical to electrical power are taken into account in two ways. Conventional reactive controllers are tuned for each sea state with the assumption that the converter has the same efficiency back and forth. MPC...

  15. An array effect of wave energy farm buoys

    Directory of Open Access Journals (Sweden)

    Hyuck-Min Kweon

    2012-12-01

    Full Text Available An ocean buoy energy farm is considered for Green energy generation and delivery to small towns along the Korean coast. The present studypresents that the floating buoy-type energy farm appears to be sufficiently feasible fortrapping more energy compared to afixed cylinder duck array. It is also seen from the numerical resultsthat the resonated waves between spaced buoys are further trapped by floating buoy motion. Our numerical study is analyzed by a plane-wave approximation, in which evanescent mode effects are included in a modified mild-slope equation based on the scattering characteristics for a single buoy.

  16. An array effect of wave energy farm buoys

    Science.gov (United States)

    Kweon, Hyuck-Min; Lee, Jung-Lyul

    2012-12-01

    An ocean buoy energy farm is considered for Green energy generation and delivery to small towns along the Korean coast. The present studypresents that the floating buoy-type energy farm appears to be sufficiently feasible fortrapping more energy compared to afixed cylinder duck array. It is also seen from the numerical resultsthat the resonated waves between spaced buoys are further trapped by floating buoy motion.Our numerical study is analyzed by a plane-wave approximation, in which evanescent mode effects are included in a modified mild-slope equation based on the scattering characteristics for a single buoy.

  17. Design and Control of Full Scale Wave Energy Simulator System

    DEFF Research Database (Denmark)

    Pedersen, Henrik C.; Hansen, Anders Hedegaard; Hansen, Rico Hjerm

    2012-01-01

    For wave energy to become feasible it is a requirement that the efficiency and reliability of the power take-off (PTO) systems are significantly improved. The cost of installing and testing PTO-systems at sea are however very high, and the focus of the current paper is therefore on the design...... of a full scale wave simulator for testing PTO-systems for point absorbers. The main challenge is here to design a system, which mimics the behavior of a wave when interacting with a given PTO-system. The paper includes a description of the developed system, located at Aalborg University......, and the considerations behind the design. Based on the description a model of the system is presented, which, along with a description of the wave theory applied, makes the foundation for the control strategy. The objective of the control strategy is to emulate not only the wave behavior, but also the dynamic wave...

  18. Experimental Testing of the Langlee Wave Energy Converter

    DEFF Research Database (Denmark)

    Lavelle, John; Kofoed, Jens Peter

    2011-01-01

    Aalborg University carried out wave tank testing a 1:20 scale model of Langlee, an oscillating wave-surge type of Wave Energy Converter (WEC). Langlee is designed to operate in deep water, with the hinged flaps attached to a, moored, semi-submerged reference frame. Langlee has a novel flap...... arrangement, with the flaps placed symmetrically opposing each other on a floating reference structure. This minimises the net force on the reference frame and increases the stability of the reference frame under optimal wave conditions. This paper presents the results and analysis from the wave tanks, which...... addressed the following: The Power Take Offs (PTOs) were simulated using a motor to resist the motion of the wings, according to the damping profile. Torque and velocity measurements were used to predict the wave- to mechanical-power conversion efficiency of the device. A number of wing types...

  19. Equilibrium shoreline response of a high wave energy beach

    Science.gov (United States)

    Yates, M.L.; Guza, R.T.; O'Reilly, W. C.; Hansen, J.E.; Barnard, P.L.

    2011-01-01

    Four years of beach elevation surveys at Ocean Beach, San Francisco, California, are used to extend an existing equilibrium shoreline change model, previously calibrated with fine sand and moderate energy waves, to medium sand and higher-energy waves. The shoreline, characterized as the cross-shore location of the mean high water contour, varied seasonally by between 30 and 60 m, depending on the alongshore location. The equilibrium shoreline change model relates the rate of horizontal shoreline displacement to the hourly wave energy E and the wave energy disequilibrium, the difference between E and the equilibrium wave energy that would cause no change in the present shoreline location. Values for the model shoreline response coefficients are tuned to fit the observations in 500 m alongshore segments and averaged over segments where the model has good skill and the estimated effects of neglected alongshore sediment transport are relatively small. Using these representative response coefficients for 0.3 mm sand from Ocean Beach and driving the model with much lower-energy winter waves observed at San Onofre Beach (also 0.3 mm sand) in southern California, qualitatively reproduces the small seasonal shoreline fluctuations at San Onofre. This consistency suggests that the shoreline model response coefficients depend on grain size and may be constant, and thus transportable, between sites with similar grain size and different wave climates. The calibrated model response coefficients predict that for equal fluctuations in wave energy, changes in shoreline location on a medium-grained (0.3 mm) beach are much smaller than on a previously studied fine-grained (0.2 mm) beach. Copyright ?? 2011 by the American Geophysical Union.

  20. Catching the Right Wave: Evaluating Wave Energy Resources and Potential Compatibility with Existing Marine and Coastal Uses

    Science.gov (United States)

    Kim, Choong-Ki; Toft, Jodie E.; Papenfus, Michael; Verutes, Gregory; Guerry, Anne D.; Ruckelshaus, Marry H.; Arkema, Katie K.; Guannel, Gregory; Wood, Spencer A.; Bernhardt, Joanna R.; Tallis, Heather; Plummer, Mark L.; Halpern, Benjamin S.; Pinsky, Malin L.; Beck, Michael W.; Chan, Francis; Chan, Kai M. A.; Levin, Phil S.; Polasky, Stephen

    2012-01-01

    Many hope that ocean waves will be a source for clean, safe, reliable and affordable energy, yet wave energy conversion facilities may affect marine ecosystems through a variety of mechanisms, including competition with other human uses. We developed a decision-support tool to assist siting wave energy facilities, which allows the user to balance the need for profitability of the facilities with the need to minimize conflicts with other ocean uses. Our wave energy model quantifies harvestable wave energy and evaluates the net present value (NPV) of a wave energy facility based on a capital investment analysis. The model has a flexible framework and can be easily applied to wave energy projects at local, regional, and global scales. We applied the model and compatibility analysis on the west coast of Vancouver Island, British Columbia, Canada to provide information for ongoing marine spatial planning, including potential wave energy projects. In particular, we conducted a spatial overlap analysis with a variety of existing uses and ecological characteristics, and a quantitative compatibility analysis with commercial fisheries data. We found that wave power and harvestable wave energy gradually increase offshore as wave conditions intensify. However, areas with high economic potential for wave energy facilities were closer to cable landing points because of the cost of bringing energy ashore and thus in nearshore areas that support a number of different human uses. We show that the maximum combined economic benefit from wave energy and other uses is likely to be realized if wave energy facilities are sited in areas that maximize wave energy NPV and minimize conflict with existing ocean uses. Our tools will help decision-makers explore alternative locations for wave energy facilities by mapping expected wave energy NPV and helping to identify sites that provide maximal returns yet avoid spatial competition with existing ocean uses. PMID:23144824

  1. Experimental Modeling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, Erik

    2011-01-01

    The Wave Dragon Wave Energy Converter is currently facing a precommercial phase. At this stage of development a reliable overtopping model is highly required, in order to predict the performance of the device at possible deployment locations. A model formulation derived for an overtopping device...... with general geometry has been used so far. The paper presents an updated formulation drawn through the tank testing of a scaled model the Wave Dragon. The sensitivity analysis of the main features influencing the overtopping flow led to an updated model formulation which can be specifically suited...... for the Wave Dragon....

  2. Superluminal X-wave propagation: energy localization and velocity.

    Science.gov (United States)

    Mugnai, D; Mochi, I

    2006-01-01

    The electromagnetic propagation of a Bessel-X wave is analyzed on the basis of a vectorial treatment in order to obtain information about the propagation of energy flux and the velocity of the energy. Knowledge of these quantities is of great interest since they are connected to the production of localized electromagnetic energy and to the topic of superluminality, respectively. The electric and magnetic fields are obtained in the far-field approximation by considering a realistic situation able to generate a Bessel-X wave. The vectorial treatment confirms the capability of this kind of wave to localize energy, while, quite surprisingly, even if the group velocity is superluminal, the energy velocity is equal to the light speed.

  3. A Method for EIA Scoping of Wave Energy Converters

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Hansen, Anne Merrild; Frigaard, Peter

    2012-01-01

    . This paper presents the development of a classification of wave energy converters that is based on the different impact the technologies are expected to have on the environment. This innovative classification can be used in order to simplify the scoping process for developers and authorities.......During the first decade of the 21st Century the World faces spread concern for global warming caused by rise of green house gasses produced mainly by combustion of fossil fuels. Under this latest spin all renewable energies run parallel in order to achieve sustainable development. Among them wave...... energy has an unequivocal potential and technology is ready to enter the market and contribute to the renewable energy sector. Yet, frameworks and regulations for wave energy development are not fully ready, experiencing a setback caused by lack of understanding of the interaction of the technologies...

  4. Renouvellement ou crise de l’imaginaire capitaliste?

    Directory of Open Access Journals (Sweden)

    Wolfe, Harald

    2008-12-01

    Full Text Available Cette contribution met en question l’imaginaire capitaliste : son noyau chez Castoriadis – maîtrise (pseudo- rationnelle, organisation bureaucratique – et ses métamorphoses contemporaines. On a parlé d’un "nouvel esprit du capitalisme" (Boltanski/Chiapello: organisation en réseau, des projets, autonomie relative du travail. Ces mutations de l’idéologie managériale et le développement correspondant de l’institution de l’organisation et du travail signifient-ils un véritable renouvellement de l’imaginaire capitaliste? Ou bien ces changements, avec leurs contradictions et leurs limites, sont-ils, au contraire, l’indice d’une crise profonde de la capacité d’innovation et de mobilisation des significations imaginaires sociales centrales du capitalisme?

  5. On the dynamics of a novel ocean wave energy converter

    Science.gov (United States)

    Orazov, B.; O'Reilly, O. M.; Savaş, Ö.

    2010-11-01

    Buoy-type ocean wave energy converters are designed to exhibit resonant responses when subject to excitation by ocean waves. A novel excitation scheme is proposed which has the potential to improve the energy harvesting capabilities of these converters. The scheme uses the incident waves to modulate the mass of the device in a manner which amplifies its resonant response. To illustrate the novel excitation scheme, a simple one-degree of freedom model is developed for the wave energy converter. This model has the form of a switched linear system. After the stability regime of this system has been established, the model is then used to show that the excitation scheme improves the power harvesting capabilities by 25-65 percent even when amplitude restrictions are present. It is also demonstrated that the sensitivity of the device's power harvesting capabilities to changes in damping becomes much smaller when the novel excitation scheme is used.

  6. On the dynamics of a novel ocean wave energy converter

    KAUST Repository

    Orazov, B.

    2010-11-01

    Buoy-type ocean wave energy converters are designed to exhibit resonant responses when subject to excitation by ocean waves. A novel excitation scheme is proposed which has the potential to improve the energy harvesting capabilities of these converters. The scheme uses the incident waves to modulate the mass of the device in a manner which amplifies its resonant response. To illustrate the novel excitation scheme, a simple one-degree of freedom model is developed for the wave energy converter. This model has the form of a switched linear system. After the stability regime of this system has been established, the model is then used to show that the excitation scheme improves the power harvesting capabilities by 2565 percent even when amplitude restrictions are present. It is also demonstrated that the sensitivity of the device\\'s power harvesting capabilities to changes in damping becomes much smaller when the novel excitation scheme is used. © 2010 Elsevier Ltd. All rights reserved.

  7. Experimental investigation of rubble mound breakwaters for wave energy conversion

    DEFF Research Database (Denmark)

    Luppa, C.; Contestabile, P.; Cavallaro, L.

    2015-01-01

    The paper describes recent laboratory investigation on the breakwater integrated device named “OBREC” (Overtopping BReakwater for Energy Conversion). This technology recently appeared on the wave energy converter scene as an executive outcome of improving composite seawalls by including overtopping...... type wave energy converters [1]. Two complementary experimental campaigns were carried out, in 2012 and in 2014. Several geometries and wave conditions were examined. Preliminary comparison of hydraulic behaviour has been summarized, focusing on reflection analysis and overtopping flow rate....... Preliminary design formulae are presented to predict overtopping at the rear side of the structure and in to the front reservoir based on both datasets. Moreover, some important results have been presented on hydraulic behaviour of OBREC with saturated reservoir. Particularly attention is paid to wave...

  8. Modeling the Buoyancy System of a Wave Energy Power Plant

    DEFF Research Database (Denmark)

    Pedersen, Tom S.; Nielsen, Kirsten M.

    2009-01-01

    A nonlinear dynamic model of the buoyancy system in a wave energy power plant is presented. The plant ("Wave Dragon") is a floating device using the potential energy in overtopping waves to produce power. A water reservoir is placed on top of the WD, and hydro turbines lead the water to the sea...... producing electrical power. Through air chambers it is possible to control the level of the WD. It is important to control the level in order to maximize the power production in proportion to the wave height, here the amount of overtopping water and the amount of potential energy is conflicting....... The pressures in the air chambers may be individually controlled by an air fan through an array of valves. The paper presents a model describing the dynamics from the air inlet to the level. Results from validation of the model against plant data are presented....

  9. Measurements of Overtopping Flow Time Series on the Wave Dragon, Wave Energy Converter

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    2009-01-01

    the characteristics of the overtopping flow are discussed and the simulation algorithm is tested. Measured data is shown from a storm build up in October 2006, from theWave Dragon prototype situated in an inland sea in Northern Denmark. This wave energy converter extracts energy from the waves, by funnelling them......A study of overtopping flow series on the Wave Dragon prototype, a low crested device designed to maximise flow, in a real sea, is presented. This study aims to fill the gap in the literature on time series of flow overtopping low crested structures. By comparing to a simulated flow...... to run-up a ramp and overtop into a reservoir. This water is stored at a higher level than the average sea surface, before being discharged through hydro turbines. The waves, device sea handling and  overtopping flow are measured by pressure transducers ahead of, beneath and in the device. Comparisons...

  10. Design Specifications for the Hanstholm WEPTOS Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Tommy Larsen

    2012-04-01

    Full Text Available The WEPTOS wave energy converter (WEC is a novel device that combines an established and efficient wave energy absorbing mechanism with a smart structure, which can regulate the amount of incoming wave energy and reduce loads in extreme wave conditions. This adjustable A-shaped slack-moored and floating structure absorbs the energy of the waves through a multitude of rotors. The shape of the rotors is based on the renowned Salter’s Duck. On each leg, the rotors pivot around a common axle, through which the rotors transfer the absorbed power to a common power take off system. The study investigates the required capacity of the power take off (PTO system and the structural forces on a WEPTOS WEC prototype, intended for installation at Hanstholm (Denmark, based on large scale experimental tests using a highly realistic laboratory model of the complete device. The results hereof includes the rotational speed and transmitted torque (and hereby power to the PTO system using different PTO control strategies, the impact of fluctuations of the available mechanical power and the effect of limiting the PTO capacity on the annual energy production. Acquisition of structural forces includes mooring forces and structural bending moments in both production and extreme wave conditions, illustrating that the regulation of the angle in the A shape ensures that extreme forces on the structure can be kept in the same order of magnitude as in production conditions.

  11. Design of full scale wave simulator for testing Power Take Off systems for wave energy converters

    DEFF Research Database (Denmark)

    Pedersen, H. C.; Hansen, R. H.; Hansen, Anders Hedegaard

    2016-01-01

    For wave energy to become a major future contributor of renewable energy it is a requirement that the efficiency and reliability of the Power Take-Off (PTO) systems is significantly improved. However, the cost of installing and testing PTO-systems at sea is very high. The focus of the current paper...... is therefore on the design and commissioning of a full scale wave simulator for testing PTO-systems for point absorbers. The challenge is to be able to design a system, which mimics the behavior of a wave when interacting with a given PTO-system – especially when considering discrete type PTO...

  12. Wave Tank Testing and Model Validation of an Autonomous Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Bret Bosma

    2015-08-01

    Full Text Available A key component in bringing ocean wave energy converters from concept to commercialization is the building and testing of scaled prototypes to provide model validation. A one quarter scale prototype of an autonomous two body heaving point absorber was modeled, built, and tested for this work. Wave tank testing results are compared with two hydrodynamic and system models—implemented in both ANSYS AQWA and MATLAB/Simulink—and show model validation over certain regions of operation. This work will serve as a guide for future developers of wave energy converter devices, providing insight in taking their design from concept to prototype stage.

  13. Extreme Loads on the Mooring Lines and Survivability Mode for the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, E.

    2011-01-01

    One of the main challenges Wave Energy Converters have to face on the road towards commercialization is to ensure survivability in extreme condition at a reasonable capital costs. For a floating device like the Wave Dragon, a reliable mooring system is essential. The control strategy of the Wave...... Dragon aims at optimizing the power production by adapting the floating level to the incoming waves and by activating the hydro-turbines and regulating their working speed. In extreme conditions though, the control strategy could be changed in order to reduce the forces in the mooring system, lowering...... the design requirements with almost no added cost. The paper presents the result of the tank testing of a 1:51.8 scale model of a North Sea Wave Dragon in extreme wave conditions of up to 100 years of return period. The results show that the extreme loads in the main mooring line can be reduced...

  14. Survivability Mode and Extreme Loads on the Mooring Lines of the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter

    This report is a product of the cooperation agreement between Wave Dragon and Aalborg University regarding phase 2 of the development of the Wave Dragon Wave Energy Converter. The research is carried out by testing the 1:51.8 scale model of the Wave Dragon, aiming at the assessment...... of the survivability of the device in extreme waves and evaluation of the design loads for the mooring component. The testing has been carried out in October 2010 by PhD student Stefano Parmeggiani and Master students Giovanna Bevilacqua and Giacomo Girardi Ferruzza at the Hydraulic and Coastal Laboratories...... of the department of Civil Engineering at Aalborg University. The outcome of the research will be used as input for future research work aimed at the design of the mooring system and the certification of the structural design for the full scale Wave Dragon demonstrator....

  15. Short term wave forecasting, using digital filters, for improved control of Wave Energy Converters

    Energy Technology Data Exchange (ETDEWEB)

    Tedd, J.; Frigaard, P. [Department of Civil Engineering, Aalborg University, Aalborg (Denmark)

    2007-07-01

    This paper presents a Digital Filter method for real time prediction of waves incident upon a Wave Energy device. The method transforms waves measured at a point ahead of the device, to expected waves incident on the device. The relationship between these incident waves and power capture is derived experimentally. Results are shown form measurements taken on the Wave Dragon prototype device, a floating overtopping device situated in Northern Denmark. In this case the method is able to accurately predict the surface elevation at the device 11.2 seconds before the measurement is made. This is sufficient to allow advanced control systems to be developed using this knowledge to significantly improve power capture.

  16. Evaluation of an energy-propagation wave refraction model

    Science.gov (United States)

    Vincent, C. E.; Carrie, A.

    1988-03-01

    A simple wave refraction model, based on the conservation of wave energy entering and leaving grid squares defined by an areal array of equally spaced depth points, has been tested on a number of idealized bathymetries and against two field data sets. The model allows waves to cross by treating the directionality of the wave field in terms of discrete energy bins 10° apart. Algorithms for predicting the extent of partial breaking ( DALLY, DEAN and DALRYMPLE, 1985 ; Journal of Geophysical Research, 90, 11917-11927) and for bottom friction over a movable bed ( GRANT and MADSEN, 1982 ; Journal of Geophysical Research, 87, 469-481) were initially incorporated in the model but, for operational reasons, were replaced by a fixed 'wave height to water depth' limit of 0.5 and by a single friction factor specified by the user. For a simple linear shoreline, close correspondence was found between the model and Snell's law for offshore directions up to 45° wave height differences are <5% while for direction the differences rise to <10% in 2 m water depth. Over a linear bank differences in wave angle between opposite sides can exceed 20% when uni-directional waves are used, due to the algorithm being irreversible; when waves with a directional spread are used the differences drop to <10%. The model is able to predict well the wave heights measured at a number of locations in Haringvliet Estuary, Holland after the friction factor was tuned to 0.04, although the higher-than-predicted wave heights further into the estuary suggests that energy input from the wind is significant and so the friction factor of 0.04 is probably an underestimate. The model also shows reasonable directional predictive ability when tested against data from Pt Sapin, Canada. Wave heights at this location are also in good agreement but suggest a friction factor nearer 0.1. The model performed well when compared with field data from Holland and Canada but was found to have a number of limitations when run

  17. Wave-current interactions at the FloWave Ocean Energy Research Facility

    Science.gov (United States)

    Noble, Donald; Davey, Thomas; Steynor, Jeffrey; Bruce, Tom; Smith, Helen; Kaklis, Panagiotis

    2015-04-01

    Physical scale model testing is an important part of the marine renewable energy development process, allowing the study of forces and device behaviour in a controlled environment prior to deployment at sea. FloWave is a new state-of-the-art ocean energy research facility, designed to provide large scale physical modelling services to the tidal and wave sector. It has the unique ability to provide complex multi-directional waves that can be combined with currents from any direction in the 25m diameter circular tank. The facility is optimised for waves around 2s period and 0.4m height, and is capable of generating currents upwards of 1.6m/s. This offers the ability to model metocean conditions suitable for most renewable energy devices at a typical scale of between 1:10 and 1:40. The test section is 2m deep, which can be classed as intermediate-depth for most waves of interest, thus the full dispersion equation must be solved as the asymptotic simplifications do not apply. The interaction between waves and currents has been studied in the tank. This has involved producing in the tank sets of regular waves, focussed wave groups, and random sea spectra including multi-directional sea states. These waves have been both inline-with and opposing the current, as well as investigating waves at arbitrary angles to the current. Changes in wave height and wavelength have been measured, and compared with theoretical results. Using theoretical wave-current interaction models, methods have been explored to "correct" the wave height in the central test area of the tank when combined with a steady current. This allows the wave height with current to be set equal to that without a current. Thus permitting, for example, direct comparison of device motion response between tests with and without current. Alternatively, this would also permit a specific wave height and current combination to be produced in the tank, reproducing recorded conditions at a particular site of interest. The

  18. Numerical Simulation of Wake Effects in the Lee of a Farm of Wave Dragon Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, C.; Troch, P.; De Visch, K.

    2009-01-01

    The contribution of wave energy to the renewable energy supply is rising. To extract a considerable amount of wave power,Wave Energy Converters (WECs) are arranged in several rows or in a ‘farm'. The wake behind each individual WEC in the farm affects the power absorption of its neighbouring WECs....... In this paper wake effects in the lee of a single Wave Dragon WEC and multiple Wave Dragon WECs are studied in a time-dependent mild-slope equation model. The Wave Dragon WEC is a floating offshore converter of the overtopping type. The water volume of overtopped waves is first captured in a basin above mean...

  19. Wave propagation of spectral energy content in a granular chain

    Directory of Open Access Journals (Sweden)

    Shrivastava Rohit Kumar

    2017-01-01

    Full Text Available A mechanical wave is propagation of vibration with transfer of energy and momentum. Understanding the spectral energy characteristics of a propagating wave through disordered granular media can assist in understanding the overall properties of wave propagation through inhomogeneous materials like soil. The study of these properties is aimed at modeling wave propagation for oil, mineral or gas exploration (seismic prospecting or non-destructive testing of the internal structure of solids. The focus is on the total energy content of a pulse propagating through an idealized one-dimensional discrete particle system like a mass disordered granular chain, which allows understanding the energy attenuation due to disorder since it isolates the longitudinal P-wave from shear or rotational modes. It is observed from the signal that stronger disorder leads to faster attenuation of the signal. An ordered granular chain exhibits ballistic propagation of energy whereas, a disordered granular chain exhibits more diffusive like propagation, which eventually becomes localized at long time periods. For obtaining mean-field macroscopic/continuum properties, ensemble averaging has been used, however, such an ensemble averaged spectral energy response does not resolve multiple scattering, leading to loss of information, indicating the need for a different framework for micro-macro averaging.

  20. Energy density and energy flow of surface waves in a strongly magnetized graphene

    Science.gov (United States)

    Moradi, Afshin

    2018-01-01

    General expressions for the energy density and energy flow of plasmonic waves in a two-dimensional massless electron gas (as a simple model of graphene) are obtained by means of the linearized magneto-hydrodynamic model and classical electromagnetic theory when a strong external magnetic field perpendicular to the system is present. Also, analytical expressions for the energy velocity, wave polarization, wave impedance, transverse and longitudinal field strength functions, and attenuation length of surface magneto-plasmon-polariton waves are derived, and numerical results are prepared.

  1. Research on a new wave energy absorption device

    Science.gov (United States)

    Lu, Zhongyue; Shang, Jianzhong; Luo, Zirong; Sun, Chongfei; Zhu, Yiming

    2018-01-01

    To reduce impact of global warming and the energy crisis problems caused by pollution of energy combustion, the research on renewable and clean energies becomes more and more important. This paper designed a new wave absorption device, and also gave an introduction on its mechanical structure. The flow tube model is analyzed, and presented the formulation of the proposed method. To verify the principle of wave absorbing device, an experiment was carried out in a laboratory environment, and the results of the experiment can be applied for optimizing the structure design of output power.

  2. User guide – COE Calculation Tool for Wave Energy Converters

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez; Kofoed, Jens Peter; Jensen, Niels Ejner Helstrup

    Aalborg University together with Energinet.dk and Julia F. Chozas Consulting Engineer, have released a freely available online spreadsheet to evaluate the Levelised Cost of Energy (LCOE) for wave energy projects. The open-access tool calculates the LCOE based on the power production of a Wave...... Energy Converter (WEC) at a particular location. Production data may derive from laboratory testing, numerical modelling or from sea trials. The tool has been developed as a transparent and simple model that evaluates WEC’s economic feasibility in a range of locations, while scaling WEC’s features...

  3. Operation and maintenance strategies for wave energy converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Marquis, Laurent; Kofoed, Jens Peter

    2015-01-01

    Inspection and maintenance costs are a significant contributor to the cost of energy for wave energy converters. There are different operation and maintenance strategies for wave energy converters. Maintenance can be performed after failure (corrective) or before a breakdown (preventive) occurs....... Furthermore, a helicopter and boats can be used to transport equipment and personnel to the device, or the whole device can be towed to a harbour for operation and maintenance actions. This article describes, among others, a risk-based inspection and maintenance planning approach where the overall repair...... and maintenance costs estimations for wave energy converter applications including real weather data and damage accumulation. Furthermore, uncertainties related with costs, structural damage accumulation, inspection accuracy and different maintenance strategies can be included. This article contains a case study...

  4. A Detailed Assessment of the Wave Energy Resource at the Atlantic Marine Energy Test Site

    Directory of Open Access Journals (Sweden)

    Reduan Atan

    2016-11-01

    Full Text Available Wave characteristic assessments of wave energy test sites provide a greater understanding of prevailing wave conditions and are therefore extremely important to both wave energy test site operators and clients as they can inform wave energy converter design, optimisation, deployment, operation and maintenance. This research presents an assessment of the wave resource at the Atlantic Marine Energy Test Site (AMETS on the west coast of Ireland based on 12-years of modelled data from January 2004 to December 2015. The primary aim is to provide an assessment of annual and seasonal wave characteristics and resource variability at the two deployment berths which comprise the site. A nested model has been developed using Simulating WAves Nearshore (SWAN to replicate wave propagations from regional to local scale with a 0.05° resolution model covering the northeast Atlantic and a 0.0027° resolution model covering AMETS. The coarse and fine models have been extensively validated against available measured data within Irish waters. 12-year model outputs from the high resolution model were analysed to determine mean and maximum conditions and operational, high and extreme event conditions for significant wave height, energy period and power. Annual and seasonal analyses are presented. The 12-year annual mean P were 68 kW/m at Berth A (BA and 57 kW/m at Berth B (BB. The resource shows strong seasonal and annual variations and the winter mean power levels were found to be strongly correlated with the North Atlantic Oscillation (NAO.

  5. International Energy Agency Ocean Energy Systems Task 10 Wave Energy Converter Modeling Verification and Validation

    DEFF Research Database (Denmark)

    Wendt, Fabian F.; Yu, Yi-Hsiang; Nielsen, Kim

    2017-01-01

    This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10...... was proposed by Bob Thresher (National Renewable Energy Laboratory) in 2015 and approved by the OES Executive Committee EXCO in 2016. The kickoff workshop took place in September 2016, wherein the initial baseline task was defined. Experience from similar offshore wind validation/verification projects (OC3-OC5...... conducted within the International Energy Agency Wind Task 30) [1], [2] showed that a simple test case would help the initial cooperation to present results in a comparable way. A heaving sphere was chosen as the first test case. The team of project participants simulated different numerical experiments...

  6. Designing and Testing Composite Energy Storage Systems for Regulating the Outputs of Linear Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Zanxiang Nie

    2017-01-01

    Full Text Available Linear wave energy converters generate intrinsically intermittent power with variable frequency and amplitude. A composite energy storage system consisting of batteries and super capacitors has been developed and controlled by buck-boost converters. The purpose of the composite energy storage system is to handle the fluctuations and intermittent characteristics of the renewable source, and hence provide a steady output power. Linear wave energy converters working in conjunction with a system composed of various energy storage devices, is considered as a microsystem, which can function in a stand-alone or a grid connected mode. Simulation results have shown that by applying a boost H-bridge and a composite energy storage system more power could be extracted from linear wave energy converters. Simulation results have shown that the super capacitors charge and discharge often to handle the frequent power fluctuations, and the batteries charge and discharge slowly for handling the intermittent power of wave energy converters. Hardware systems have been constructed to control the linear wave energy converter and the composite energy storage system. The performance of the composite energy storage system has been verified in experiments by using electronics-based wave energy emulators.

  7. Experimental Study of the WEPTOS Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Marchalot, Tanguy

    This report presents the results of an experimental study on the power conversion capabilities and structural loads of the WEPTOS wave energy converter. The investigation focuses mainly at identifying the performance of the WEPTOS prototype in a wide range of production wave states...... and at the mooring forces and structural bending moments in extreme wave conditions, in order to estimate the performance and structural loads of larger WEPTOS machines being located at various offshore locations of interest. The following aspects were the main subjects of investigation: Performance of the prototype...... under a constant and linear PTO loading, the opening angle of the device, the effect of alterations to the wave conditions, and mooring forces and structural bending moments in production and extreme wave states. During the study, a highly realistic scale model was supplied by the client, WEPTOS, which...

  8. Experimental Validation of a Wave Energy Converter Array Hydrodynamics Tool

    DEFF Research Database (Denmark)

    Ruiz, Pau Mercadé; Ferri, Francesco; Kofoed, Jens Peter

    2017-01-01

    This paper uses experimental data to validate a wave energy converter (WEC) array hydrodynamics tool developed within the context of linearized potential flow theory. To this end, wave forces and power absorption by an array of five-point absorber WECs in monochromatic and panchromatic waves were...... measured from a set of deep-water wave basin experimental tests. Unlike the few other examples of WEC array experimental campaigns, the power take-off (PTO) system of each WEC was simulated by means of advanced equipment capable of accurately reproducing linear control strategies and, thereby, reducing......, wave forces and power absorption with less than 17.5% and 23.0% error, respectively, for more than 68% of the predictions....

  9. Local energy decay for linear wave equations with variable coefficients

    Science.gov (United States)

    Ikehata, Ryo

    2005-06-01

    A uniform local energy decay result is derived to the linear wave equation with spatial variable coefficients. We deal with this equation in an exterior domain with a star-shaped complement. Our advantage is that we do not assume any compactness of the support on the initial data, and its proof is quite simple. This generalizes a previous famous result due to Morawetz [The decay of solutions of the exterior initial-boundary value problem for the wave equation, Comm. Pure Appl. Math. 14 (1961) 561-568]. In order to prove local energy decay, we mainly apply two types of ideas due to Ikehata-Matsuyama [L2-behaviour of solutions to the linear heat and wave equations in exterior domains, Sci. Math. Japon. 55 (2002) 33-42] and Todorova-Yordanov [Critical exponent for a nonlinear wave equation with damping, J. Differential Equations 174 (2001) 464-489].

  10. Hydrodynamic analysis of oscillating water column wave energy devices

    DEFF Research Database (Denmark)

    Bingham, Harry B.; Ducasse, Damien; Nielsen, Kim

    2015-01-01

    A 40-chamber I-Beam attenuator-type, oscillating water column, wave energy converter is analyzed numerically based on linearized potential flow theory, and experimentally via model test experiments. The high-order panel method WAMIT by Newman and Lee (WAMIT; a radiation–diffraction panel program...... for wave-body interactions, 2014, http://​www.​wamit.​com) is used for the basic wave-structure interaction analysis. The damping applied to each chamber by the power take off is modeled in the experiment by forcing the air through a hole with an area of about 1 % of the chamber water surface area....... In the numerical model, this damping is modeled by an equivalent linearized damping coefficient which extracts the same amount of energy over one cycle as the experimentally measured quadratic damping coefficient. The pressure in each chamber in regular waves of three different height-to-length ratios is measured...

  11. Preliminary Results from Second Phase Sea Testing of the Wave Dragon Prototype Wave Energy Converter

    DEFF Research Database (Denmark)

    Soerensen, Hans Chr.; Tedd, James; Friis-Madsen, Erik

    2006-01-01

    In March 2006 the prototype Wave Dragon has been redeployed to a more energetic site in Nissum Bredning an inland sea in Western Denmark. This has followed a period of renovation of many aspects of the device which have resulted in 20% higher energy output. This paper describes the preliminary...... results from this period of testing at the higher energy site....

  12. Low energy consumption vortex wave flow membrane bioreactor.

    Science.gov (United States)

    Wang, Zhiqiang; Dong, Weilong; Hu, Xiaohong; Sun, Tianyu; Wang, Tao; Sun, Youshan

    2017-11-01

    In order to reduce the energy consumption and membrane fouling of the conventional membrane bioreactor (MBR), a kind of low energy consumption vortex wave flow MBR was exploited based on the combination of biofilm process and membrane filtration process, as well as the vortex wave flow technique. The experimental results showed that the vortex wave flow state in the membrane module could be formed when the Reynolds number (Re) of liquid was adjusted between 450 and 1,050, and the membrane flux declined more slowly in the vortex wave flow state than those in the laminar flow state and turbulent flow state. The MBR system was used to treat domestic wastewater under the condition of vortex wave flow state for 30 days. The results showed that the removal efficiency for CODcr and NH3-N was 82% and 98% respectively, and the permeate quality met the requirement of 'Water quality standard for urban miscellaneous water consumption (GB/T 18920-2002)'. Analysis of the energy consumption of the MBR showed that the average energy consumption was 1.90 ± 0.55 kWh/m3 (permeate), which was only two thirds of conventional MBR energy consumption.

  13. Are Wave and Tidal Energy Plants New Green Technologies?

    Science.gov (United States)

    Douziech, Mélanie; Hellweg, Stefanie; Verones, Francesca

    2016-07-19

    Wave and tidal energy plants are upcoming, potentially green technologies. This study aims at quantifying their various potential environmental impacts. Three tidal stream devices, one tidal range plant and one wave energy harnessing device are analyzed over their entire life cycles, using the ReCiPe 2008 methodology at midpoint level. The impacts of the tidal range plant were on average 1.6 times higher than the ones of hydro-power plants (without considering natural land transformation). A similar ratio was found when comparing the results of the three tidal stream devices to offshore wind power plants (without considering water depletion). The wave energy harnessing device had on average 3.5 times higher impacts than offshore wind power. On the contrary, the considered plants have on average 8 (wave energy) to 20 (tidal stream), or even 115 times (tidal range) lower impact than electricity generated from coal power. Further, testing the sensitivity of the results highlighted the advantage of long lifetimes and small material requirements. Overall, this study supports the potential of wave and tidal energy plants as alternative green technologies. However, potential unknown effects, such as the impact of turbulence or noise on marine ecosystems, should be further explored in future research.

  14. Selection of Design Power of Wave Energy Converters Based on Wave Basin Experiments

    DEFF Research Database (Denmark)

    Martinelli, L.; Zanuttigh, B.; Kofoed, Jens Peter

    2011-01-01

    of the measured efficiency; description of the energy production by means of a function of the design capacity; application of a simple formula for cost benefit analysis. The analyses here proposed are based on the experimental results of 3D tests on two floating wave energy devices, named LEANCON and DEXA......Aim of this paper is to develop a method for selecting the optimal power generation capacity for which a wave energy converter (WEC) should be rated. This method is suitable for the earliest stages of development, when several studies are missing, including design of the Power Take Off (PTO) system...

  15. Wave energy converter effects on wave propagation: A sensitivity study in Monterey Bay, CA

    Science.gov (United States)

    Chang, G.; Jones, C. A.; Roberts, J.; Magalen, J.; Ruehl, K.; Chartrand, C.

    2014-12-01

    The development of renewable offshore energy in the United States is growing rapidly and wave energy is one of the largest resources currently being evaluated. The deployment of wave energy converter (WEC) arrays required to harness this resource could feasibly number in the hundreds of individual devices. The WEC arrays have the potential to alter nearshore wave propagation and circulation patterns and ecosystem processes. As the industry progresses from pilot- to commercial-scale it is important to understand and quantify the effects of WECs on the natural nearshore processes that support a local, healthy ecosystem. To help accelerate the realization of commercial-scale wave power, predictive modeling tools have been developed and utilized to evaluate the likelihood of environmental impact. At present, direct measurements of the effects of different types of WEC arrays on nearshore wave propagation are not available; therefore wave model simulations provide the groundwork for investigations of the sensitivity of model results to prescribed WEC characteristics over a range of anticipated wave conditions. The present study incorporates a modified version of an industry standard wave modeling tool, SWAN (Simulating WAves Nearshore), to simulate wave propagation through a hypothetical WEC array deployment site on the California coast. The modified SWAN, referred to as SNL-SWAN, incorporates device-specific WEC power take-off characteristics to more accurately evaluate a WEC device's effects on wave propagation. The primary objectives were to investigate the effects of a range of WEC devices and device and array characteristics (e.g., device spacing, number of WECs in an array) on nearshore wave propagation using SNL-SWAN model simulations. Results showed that significant wave height was most sensitive to variations in WEC device type and size and the number of WEC devices in an array. Locations in the lee centerline of the arrays in each modeled scenario showed the

  16. Energy transfer from lower energy to higher-energy electrons mediated by whistler waves in the radiation belts

    Science.gov (United States)

    Shklyar, D. R.

    2017-01-01

    We study the problem of energy exchange between waves and particles, which leads to energization of the latter, in an unstable plasma typical of the radiation belts. The ongoing Van Allen Probes space mission brought this problem among the most discussed in space physics. A free energy which is present in an unstable plasma provides the indispensable condition for energy transfer from lower energy particles to higher-energy particles via resonant wave-particle interaction. This process is studied in detail by the example of electron interactions with whistler mode wave packets originated from lightning-induced emission. We emphasize that in an unstable plasma, the energy source for electron energization is the energy of other particles, rather than the wave energy as is often assumed. The way by which the energy is transferred from lower energy to higher-energy particles includes two processes that operate concurrently, in the same space-time domain, or sequentially, in different space-time domains, in which a given wave packet is located. In the first process, one group of resonant particles gives the energy to the wave. The second process consists in wave absorption by another group of resonant particles, whose energy therefore increases. We argue that this mechanism represents an efficient means of electron energization in the radiation belts.

  17. Wave Energy, Lever Operated Pivoting Float LOPF Study

    DEFF Research Database (Denmark)

    Margheritini, Lucia

    for maximum energy output in regular as well as irregular waves. During storms the buoy pivots and streamlines itself to minimize loads on the mooring line. A conservative estimate shows that a full scale system for North Sea conditions has a float size width of 15 m that will, with 60% generator efficiency......The fully instrumented Resen Waves Lever Operated Pivoting Float LOPF wave energy buoy model has gone through the first stage of testing in regular waves in scale 1:25 of the North Sea wave conditions, in the 3D deep wave basin at the Hydraulic and Coastal Engineering Laboratory of Aalborg...... University in Denmark. The model size was 60cm W x 90cm L x 21cm H. The 60 cm width pointed towards the wave front. The LOPF buoy is characterized by a simple mechanical design with few moving parts and direct electrical output and it is taut moored to the sea bed, so all forces are referenced to the seabed...

  18. The SSG Wave Energy Converter: Performance, Status and Recent Developments

    Directory of Open Access Journals (Sweden)

    Mariano Buccino

    2012-01-01

    Full Text Available The Sea-wave Slot-cone Generator (SSG is a Wave Energy Converter based on the wave overtopping principle; it employs several reservoirs placed on top of each other, in which the energy of incoming waves is stored as potential energy. Then, the captured water runs through turbines for electricity production. The system works under a wide spectrum of different wave conditions, giving a high overall efficiency. It can be suitable for shoreline and breakwater applications and presents particular advantages, such as sharing structure costs, availability of grid connection and recirculation of water inside the harbor, as the outlet of the turbines is on the rear part of the system. Recently, plans for the SSG pilot installations are in progress at the Svaaheia site (Norway, the port of Hanstholm (Denmark and the port of Garibaldi (Oregon, USA. In the last-mentioned two projects, the Sea-wave Slot-cone Generator technology is integrated into the outer harbor breakwater and jetty reconstruction projects. In the last years extensive studies have been performed on the hydraulic and the structural response of this converter, with the aim of optimizing the design process. The investigations have been conducted by physical model tests and numerical simulations and many results have been published on both conference proceedings and journals. The main scope of this paper is reviewing the most significant findings, to provide the reader with an organic overview on the present status of knowledge.

  19. A Review of Wave-to-Wire Models for Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Markel Penalba

    2016-06-01

    Full Text Available Control of wave energy converters (WECs has been very often limited to hydrodynamic control to absorb the maximum energy possible from ocean waves. This generally ignores or significantly simplifies the performance of real power take-off (PTO systems. However, including all the required dynamics and constraints in the control problem may considerably vary the control strategy and the power output. Therefore, this paper considers the incorporation into the model of all the conversion stages from ocean waves to the electricity network, referred to as wave-to-wire (W2W models, and identifies the necessary components and their dynamics and constraints, including grid constraints. In addition, the paper identifies different control inputs for the different components of the PTO system and how these inputs are articulated to the dynamics of the system. Examples of pneumatic, hydraulic, mechanical or magnetic transmission systems driving a rotary electrical generator, and linear electric generators are provided.

  20. Optimization of bottom-hinged flap-type wave energy converter for a specific wave rose

    Science.gov (United States)

    Behzad, Hamed; Panahi, Roozbeh

    2017-06-01

    In this paper, we conducted a numerical analysis on the bottom-hinged flap-type Wave Energy Convertor (WEC). The basic model, implemented through the study using ANSYS-AQWA, has been validated by a three-dimensional physical model of a pitching vertical cylinder. Then, a systematic parametric assessment has been performed on stiffness, damping, and WEC direction against an incoming wave rose, resulting in an optimized flap-type WEC for a specific spot in the Persian Gulf. Here, stiffness is tuned to have a near-resonance condition considering the wave rose, while damping is modified to capture the highest energy for each device direction. Moreover, such sets of specifications have been checked at different directions to present the best combination of stiffness, damping, and device heading. It has been shown that for a real condition, including different wave heights, periods, and directions, it is very important to implement the methodology introduced here to guarantee device performance.

  1. Multistable chain for ocean wave vibration energy harvesting

    Science.gov (United States)

    Harne, R. L.; Schoemaker, M. E.; Wang, K. W.

    2014-03-01

    The heaving of ocean waves is a largely untapped, renewable kinetic energy resource. Conversion of this energy into electrical power could integrate with solar technologies to provide for round-the-clock, portable, and mobile energy supplies usable in a wide variety of marine environments. However, the direct drive conversion methodology of gridintegrated wave energy converters does not efficiently scale down to smaller, portable architectures. This research develops an alternative power conversion approach to harness the extraordinarily large heaving displacements and long oscillation periods as an excitation source for an extendible vibration energy harvesting chain. Building upon related research findings and engineering insights, the proposed system joins together a series of dynamic cells through bistable interfaces. Individual impulse events are generated as the inertial mass of each cell is pulled across a region of negative stiffness to induce local snap through dynamics; the oscillating magnetic inertial mass then generates current in a coil which is connected to energy harvesting circuitry. It is shown that linking the cells into a chain transmits impulses through the system leading to cascades of vibration and enhancement of electrical energy conversion from each impulse event. This paper describes the development of the multistable chain and ways in which realistic design challenges were addressed. Numerical modeling and corresponding experiments demonstrate the response of the chain due to slow and large amplitude input motion. Lastly, experimental studies give evidence that energy conversion efficiency of the chain for wave energy conversion is much higher than using an equal number of cells without connections.

  2. International Energy Agency Ocean Energy Systems Task 10 Wave Energy Converter Modeling Verification and Validation: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, Fabian F [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nielsen, Kim [Ramboll, Copenhagen (Denmark); Ruehl, Kelley [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bunnik, Tim [MARIN (Netherlands); Touzon, Imanol [Tecnalia (Spain); Nam, Bo Woo [KRISO (Korea, Rep. of); Kim, Jeong Seok [KRISO (Korea, Rep. of); Janson, Carl Erik [Chalmers University (Sweden); Jakobsen, Ken-Robert [EDRMedeso (Norway); Crowley, Sarah [WavEC (Portugal); Vega, Luis [Hawaii Natural Energy Institute (United States); Rajagopalan, Krishnakimar [Hawaii Natural Energy Institute (United States); Mathai, Thomas [Glosten (United States); Greaves, Deborah [Plymouth University (United Kingdom); Ransley, Edward [Plymouth University (United Kingdom); Lamont-Kane, Paul [Queen' s University Belfast (United Kingdom); Sheng, Wanan [University College Cork (Ireland); Costello, Ronan [Wave Venture (United Kingdom); Kennedy, Ben [Wave Venture (United Kingdom); Thomas, Sarah [Floating Power Plant (Denmark); Heras, Pilar [Floating Power Plant (Denmark); Bingham, Harry [Technical University of Denmark (Denmark); Kurniawan, Adi [Aalborg University (Denmark); Kramer, Morten Mejlhede [Aalborg University (Denmark); Ogden, David [INNOSEA (France); Girardin, Samuel [INNOSEA (France); Babarit, Aurelien [EC Nantes (France); Wuillaume, Pierre-Yves [EC Nantes (France); Steinke, Dean [Dynamic Systems Analysis (Canada); Roy, Andre [Dynamic Systems Analysis (Canada); Beatty, Scott [Cascadia Coast Research (Canada); Schofield, Paul [ANSYS (United States); Kim, Kyong-Hwan [KRISO (Korea, Rep. of); Jansson, Johan [KTH Royal Inst. of Technology, Stockholm (Sweden); BCAM (Spain); Hoffman, Johan [KTH Royal Inst. of Technology, Stockholm (Sweden)

    2017-10-16

    This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10 was proposed by Bob Thresher (National Renewable Energy Laboratory) in 2015 and approved by the OES Executive Committee EXCO in 2016. The kickoff workshop took place in September 2016, wherein the initial baseline task was defined. Experience from similar offshore wind validation/verification projects (OC3-OC5 conducted within the International Energy Agency Wind Task 30) [1], [2] showed that a simple test case would help the initial cooperation to present results in a comparable way. A heaving sphere was chosen as the first test case. The team of project participants simulated different numerical experiments, such as heave decay tests and regular and irregular wave cases. The simulation results are presented and discussed in this paper.

  3. Energy flow characteristics of vector X-Waves

    KAUST Repository

    Salem, Mohamed

    2011-01-01

    The vector form of X-Waves is obtained as a superposition of transverse electric and transverse magnetic polarized field components. It is shown that the signs of all components of the Poynting vector can be locally changed using carefully chosen complex amplitudes of the transverse electric and transverse magnetic polarization components. Negative energy flux density in the longitudinal direction can be observed in a bounded region around the centroid; in this region the local behavior of the wave field is similar to that of wave field with negative energy flow. This peculiar energy flux phenomenon is of essential importance for electromagnetic and optical traps and tweezers, where the location and momenta of microand nanoparticles are manipulated by changing the Poynting vector, and in detection of invisibility cloaks. © 2011 Optical Society of America.

  4. Shock Wave Energy Dissipation by Metal-Organic Framework

    Science.gov (United States)

    Zhou, Xuan; Miao, Yurun; Banlusan, Kiettipong; Shaw, William; Strachan, Alejandro; Suslick, Kenneth; Dlott, Dana

    2017-06-01

    Metal-organic framework (MOF) such as ZIF-8 and UiO-66 show promising shock energy dissipation abilities through mechano-chemical reactions including bond breaking and pore collapse. In this work, we performed quantitative measurements on the shock wave energy attenuated by MOF films using a laser-driven flyer-plate apparatus. Aluminum flyer plates of 75-um thick were accelerated to speeds up to 2.0 km/s by a flat-top pulsed laser to impact the MOF film. The MOF layer was coated on a 200-nm thick gold mirror, which was deposited previously on glass substrate. Photonic Doppler velocimetry (PDV) was used to track the motions of the gold mirror, which can be converted to the energy flux and fluence of the shock wave that transmitted through the MOF layer. We deduced the shock energy that was attenuated by the MOF film by comparing the transmitted energy flux/fluence obtained with and without the presence of the MOF layer. A two-wave-shaped flux-time curve was obtained with the MOF layer because of its nanoporous structure. Studies on the shock wave energy attenuation by ZIF-8 and UiO-66 were carried out under various flyer speeds and sample thicknesses. We used in situ emission spectroscopy to verify that pore collapse was accompanied by chemical bond breakage. Corresponding author:dlott@illinois.edu.

  5. Reliability-Based Structural Optimization of Wave Energy Converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kramer, Morten; Sørensen, John Dalsgaard

    2014-01-01

    More and more wave energy converter (WEC) concepts are reaching prototype level. Once the prototype level is reached, the next step in order to further decrease the levelized cost of energy (LCOE) is optimizing the overall system with a focus on structural and maintenance (inspection) costs......, as well as on the harvested power from the waves. The target of a fully-developed WEC technology is not maximizing its power output, but minimizing the resulting LCOE. This paper presents a methodology to optimize the structural design of WECs based on a reliability-based optimization problem...

  6. Hydraulic Evaluation of the LEANCON Wave Energy Converter

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter

    This report is a product of the co-operation agreement between Aalborg University and LEANCON (by Kurt Due Rasmussen) on the evaluation and development of the LEANCON wave energy converter (WEC). The work reported here has focused on evaluation of the power production of the device, based...... on laboratory testing of a model of the WEC provided by LEANCON. LEANCON, represented by Kurt Due Rasmussen, has been heavily involved in the testing of the device, including the instrumentation, model setup and execution of the tests in the laboratory, all under the supervision of the personnel of the Wave...... Energy Research Group at Department of Civil Engineering, Aalborg University....

  7. Structural Reliability of Plain Bearings for Wave Energy Converter Applications

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kramer, Morten Mejlhede; Sørensen, John Dalsgaard

    2016-01-01

    The levelized cost of energy (LCOE) from wave energy converters (WECs) needs to be decreased in order to be able to become competitive with other renewable electricity sources. Probabilistic reliability methods can be used to optimize the structure of WECs. Optimization is often performed...... the hydraulic cycle when waves are passing. The new PTO system leads to different load characteristics at the floater itself compared to the actual setup where the turbine/generator is directly coupled to the fluctuating hydraulic pressure within the PTO system. This paper calculates the structural reliability...

  8. The Potential for Wave Energy in the North Sea

    DEFF Research Database (Denmark)

    Sørensen, H. C.; Chozas, Julia Fernandez

    2010-01-01

    as in the Atlantic and the distance to shore relatively long compared to sites with good wave climate like Ireland, Portugal, Spain and the west coast of UK. The increasing activities within offshore wind in the North Sea and the attempt to build a super grid connecting the wind sites with the major consumers around......The North Sea has not yet been regarded as prime area for wave energy development in Europe except in Denmark, Benelux and Germany. The reason is the relatively low intensity of waves (12-17kW/m) compared to the Atlantic with a wave climate of 24-48kW/m. Further on the design wave load is almost...... the North Sea are expected to change the priority in favour of utilising wave energy from the North Sea. The paper describes the opportunities for power production in the North Sea considering the competition for space and the synergy with offshore wind. Two approaches are used: a traditional national...

  9. Wave energy budget analysis in the Earth's radiation belts uncovers a missing energy

    Science.gov (United States)

    Artemyev, A.V.; Agapitov, O.V.; Mourenas, D.; Krasnoselskikh, V.V.; Mozer, F.S.

    2015-01-01

    Whistler-mode emissions are important electromagnetic waves pervasive in the Earth's magnetosphere, where they continuously remove or energize electrons trapped by the geomagnetic field, controlling radiation hazards to satellites and astronauts and the upper-atmosphere ionization or chemical composition. Here, we report an analysis of 10-year Cluster data, statistically evaluating the full wave energy budget in the Earth's magnetosphere, revealing that a significant fraction of the energy corresponds to hitherto generally neglected very oblique waves. Such waves, with 10 times smaller magnetic power than parallel waves, typically have similar total energy. Moreover, they carry up to 80% of the wave energy involved in wave–particle resonant interactions. It implies that electron heating and precipitation into the atmosphere may have been significantly under/over-valued in past studies considering only conventional quasi-parallel waves. Very oblique waves may turn out to be a crucial agent of energy redistribution in the Earth's radiation belts, controlled by solar activity. PMID:25975615

  10. System for harvesting water wave energy

    Science.gov (United States)

    Wang, Zhong Lin; Su, Yanjie; Zhu, Guang; Chen, Jun

    2016-07-19

    A generator for harvesting energy from water in motion includes a sheet of a hydrophobic material, having a first side and an opposite second side, that is triboelectrically more negative than water. A first electrode sheet is disposed on the second side of the sheet of a hydrophobic material. A second electrode sheet is disposed on the second side of the sheet of a hydrophobic material and is spaced apart from the first electrode sheet. Movement of the water across the first side induces an electrical potential imbalance between the first electrode sheet and the second electrode sheet.

  11. Simulation of Wave Energy Harvesting by Piezoelectric Seaweed

    Science.gov (United States)

    Cui, Yiliang; Wang, Haifeng; Li, Meng; Sun, Kaili

    2017-10-01

    In the last decade, the research about energy harvesting for low-power electricity generation has received growing interest all around the world. In this study, a piezoelectric seaweed made by piezoelectric polymer (PVDF) has been used as the energy harvester. ANSYS Workbench is utilized to construct the flow domain and piezoelectric energy harvester, set up working conditions for the simulation, and calculate the power generating capacity of the piezoelectric seaweed actuated by the vibration. The results show that the maximal and minimal output voltages are 117.65V and -112.53V respectively, and it is possible to harvest energy from ocean wave using piezoelectric seaweed.

  12. Wave Energy Resources Assessment for the China Sea Based on Remote Sensing Data

    Science.gov (United States)

    Meng, Junmin; Zhang, Jie; Wan, Yong; Fabrice, Collard

    2014-11-01

    Wave energy is a type of significant renewable energy of ocean. In order to exploit this promising energy, it is necessary to have a full apprehension of its distribution. Remote sensing is a novel method for ocean wave observations. In this paper, based on 2009-2013 AVISO multi-satellites merged altimeter data by CNES&CLS and ESA ENVISAT ASAR observed wave field, assessment of wave energy resources were carried out. We select the South China Sea and the sea area around the Yangtze Estuary in the East China Sea as examples. Some factors about wave energy were calculated to assess the distribution of wave energy in these areas. The results show that it is effective and feasible to evaluate wave energy resources by altimeter and SAR(Synthetic Aperture Radar) data. We can carry out wave observations and wave energy assessment better by the combination of remote sensing data and wave model simulation.

  13. Wave energy, lever operated pivoting float LOPF study

    Energy Technology Data Exchange (ETDEWEB)

    Margheritini, L.

    2012-11-01

    The fully instrumented Resen Waves Lever Operated Pivoting Float LOPF wave energy buoy model has gone through the first stage of testing in regular waves in scale 1:25 of the North Sea wave conditions, in the 3D deep wave basin at the Hydraulic and Coastal Engineering Laboratory of Aalborg University in Denmark. The model size was 60cm W x 90cm L x 21cm H. The 60 cm width pointed towards the wave front. The LOPF buoy is characterized by a simple mechanical design with few moving parts and direct electrical output and it is taut moored to the sea bed, so all forces are referenced to the seabed for maximum energy output in regular as well as irregular waves. During storms the buoy pivots and streamlines itself to minimize loads on the mooring line. A conservative estimate shows that a full scale system for North Sea conditions has a float size width of 15 m that will, with 60% generator efficiency, produce 610 MWh/y (609.497 kWh/y) with an average power output of 69.6 kW, which requires a generator capacity of 700 kW. It is expected the generator efficiency can be increased to 90% in the future. More specific calculations (from EnergiNet) show that with one generator of 695 kW the expected power production is 585 MWh/y; with a generator of 250 kW and 100 kW, the expected power production is 481 MWh/y and 182 MWh/y respectively. In addition there are several areas for future improvements for increased power production. (Author)

  14. Small energy traveling waves for the Euler-Korteweg system

    Science.gov (United States)

    Audiard, Corentin

    2017-09-01

    We investigate the existence and properties of traveling waves for the Euler-Korteweg system with general capillarity and pressure. Our main result is the existence in dimension two of waves with arbitrarily small energies. They are obtained as minimizers of a modified energy with fixed momentum. The proof builds upon various ideas developed for the Gross-Pitaevskii equation (and more generally nonlinear Schrödinger equations with non zero limit at infinity). Even in the Schrödinger case, the fact that we work with the hydrodynamical variables and a general pressure law both brings new difficulties and some simplifications. Independently, in dimension one we prove that the criterion for the linear instability of traveling waves from Benzoni-Gavage (2013 Differ. Integral Equ. 26 439-85) actually implies nonlinear instability.

  15. Optimization of wave energy capture of wave-powered navigational lighting buoys of seadromes

    Directory of Open Access Journals (Sweden)

    WANG Guangda

    2017-12-01

    Full Text Available [Objectives] This paper proposes an optimized design for wave-power navigational lighting buoys of seadromes.[Methods] Based on the theory of three-dimensional potential flow, the buoyant motion response of a buoy is calculated. A type of array of wave-power navigational lighting buoys located in an offshore seadrome is proposed,and a procedure for the design optimization of its component buoys is presented. Matching the best Power Take-Off(PTO damping, the diameter to draft ratio and array distance with the best energy capture width ratio are acquired, and the energy capture for the short-term forecast of the buoy array is accomplished. On this basis, combined with the actual sea conditions, energy capture for the long-term forecast of an individual buoy is accomplished. The influence of the buoy diameter, buoy draft and array distance on the energy capture width ratio is discussed.[Results] The results show that the energy capture width ratio is at its greatest when the diameter to draft ratio is between 2.4-2.6; the smaller the distance between array buoys, the greater the energy capture width of each buoy.[Conclusions] The results can provide a reference and suggestions for the optimization of the design of wave energy generation for arrays buoy.

  16. Synergies for a Wave-Wind Energy Concept

    DEFF Research Database (Denmark)

    Pérez-Collazo, Carlos; Jakobsen, Morten Møller; Chozas, Julia Fernandez

    2013-01-01

    into the positive synergies when offshore wind and wave energy technologies share the same marine space. Among that ones are: shared cost; a smoothing power output; and shielding effects of WECs over the offshore wind farm, which contribute to increase the weather windows for operation and maintenance. Secondly...

  17. Hydraulic power take-off for wave energy systems

    DEFF Research Database (Denmark)

    Christensen, Georg Kronborg

    2001-01-01

    Investigation and laboratory experiments with a hydraulic power conversion system for converting forces from a 2.5m diamter float to extract energy from seawaves. The test rig consists of a hydraulic wave simulator and a hydraulic point absorber. The absorber converts the incomming forces...

  18. Optimization of Overtopping Wave Energy Converters by Geometry Control

    DEFF Research Database (Denmark)

    Victor, L.; Troch, P.; Kofoed, Jens Peter

    2011-01-01

    In this paper, the results of a study on the effects of geometry control on the performance of overtopping wave energy converters with a simple geometry built in coastal structures (simple OWECs) are presented. Empirical formulae, derived based on experimental tests on simple OWECs with varying...

  19. Aiding Design of Wave Energy Converters via Computational Simulations

    Science.gov (United States)

    Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

    2015-11-01

    With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

  20. Experimental testing of moorings for large floating wave energy converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2016-01-01

    This paper presents the outcome of a test campaign, which investigates the behaviour of a synthetic mooring system applied to the Floating Power Plant wave energy converter. The study investigates the motion and tension response under operational and extreme sea states expected at the deployment...

  1. Experimental Study on a Rotor for WEPTOS Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Marchalot, Tanguy

    This report presents the results of an experimental study of the power conversion capabilities of one single rotor of the WEPTOS wave energy converter. The investigation focuses mainly on defining the optimal weight distribution in the rotor in order to improve the hydraulic performance through...

  2. Initial Assessment of Mooring Solutions for Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Delaney, Martin

    2016-01-01

    The present study investigates three different types of mooring systems in order to establish potential cost reductions and applicability to wave energy converters (WECs). Proposed mooring systems for three existing WECs create the basis for this study, and the study highlights areas of interest...

  3. Electromagnetic Lead Screw for Potential Wave Energy Application

    DEFF Research Database (Denmark)

    Lu, Kaiyuan; Wu, Weimin

    2014-01-01

    This paper presents a new type electromagnetic lead screw (EMLS) intended for wave energy application. Similar to the mechanical lead screw, this electromagnetic version can transfer slow linear motion to high-rotational motion, offering gearing effects. Compared with the existing pure magnetic...

  4. Prediction of the Individual Wave Overtopping Volumes of a Wave Energy Converter using Experimental Testing and First Numerical Model Results

    DEFF Research Database (Denmark)

    Victor, L.; Troch, P.; Kofoed, Jens Peter

    2009-01-01

    For overtopping wave energy converters (WECs) a more efficient energy conversion can be achieved when the volumes of water, wave by wave, that enter their reservoir are known and can be predicted. A numerical tool is being developed using a commercial CFD-solver to study and optimize...... nearshore 2Dstructure. First numerical model results are given for a specific test with regular waves, and are compared with the corresponding experimental results in this paper....

  5. Energy Content & Spectral Energy Representation of Wave Propagation in a Granular Chain

    Science.gov (United States)

    Shrivastava, Rohit; Luding, Stefan

    2017-04-01

    A mechanical wave is propagation of vibration with transfer of energy and momentum. Studying the energy as well as spectral energy characteristics of a propagating wave through disordered granular media can assist in understanding the overall properties of wave propagation through materials like soil. The study of these properties is aimed at modeling wave propagation for oil, mineral or gas exploration (seismic prospecting) or non-destructive testing for the study of internal structure of solids. Wave propagation through granular materials is often accompanied by energy attenuation which is quantified by Quality factor and this parameter has often been used to characterize material properties, hence, determining the Quality factor (energy attenuation parameter) can also help in determining the properties of the material [3], studied experimentally in [2]. The study of Energy content (Kinetic, Potential and Total Energy) of a pulse propagating through an idealized one-dimensional discrete particle system like a mass disordered granular chain can assist in understanding the energy attenuation due to disorder as a function of propagation distance. The spectral analysis of the energy signal can assist in understanding dispersion as well as attenuation due to scattering in different frequencies (scattering attenuation). The selection of one-dimensional granular chain also helps in studying only the P-wave attributes of the wave and removing the influence of shear or rotational waves. Granular chains with different mass distributions have been studied, by randomly selecting masses from normal, binary and uniform distributions and the standard deviation of the distribution is considered as the disorder parameter, higher standard deviation means higher disorder and lower standard deviation means lower disorder [1]. For obtaining macroscopic/continuum properties, ensemble averaging has been invoked. Instead of analyzing deformation-, velocity- or stress

  6. Wave Energy Converter (WEC) Array Effects on Wave Current and Sediment Circulation: Monterey Bay CA.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Jones, Craig; Magalen, Jason

    2014-09-01

    The goal s of this study were to develop tools to quantitatively characterize environments where wave energy converter ( WEC ) devices may be installed and to assess e ffects on hydrodynamics and lo cal sediment transport. A large hypothetical WEC array was investigated using wave, hydrodynamic, and sediment transport models and site - specific average and storm conditions as input. The results indicated that there were significant changes in sediment s izes adjacent to and in the lee of the WEC array due to reduced wave energy. The circulation in the lee of the array was also altered; more intense onshore currents were generated in the lee of the WECs . In general, the storm case and the average case show ed the same qualitative patterns suggesting that these trends would be maintained throughout the year. The framework developed here can be used to design more efficient arrays while minimizing impacts on nearshore environmen ts.

  7. Wave induced coastal cliff top ground motions and infragravity wave dissipation under high energy wave conditions.

    Science.gov (United States)

    Earlie, C. S.; le Dantec, N.; Young, A.

    2016-12-01

    Coastal cliff erosion is a widespread problem that threatens property and infrastructure globally. The prediction of this risk calls for robust understanding of the processes and mechanisms involved in causing coastal cliff failure. Over the last decade, a number of geomorphological studies have highlighted the importance of the relationship between the offshore wave climate and cliff-toe water levels, and the resultant coastal response in terms of cliff-top ground motion and erosion. Field-based studies of instantaneous cliff response to direct wave impact have shown that wave-induced loading of the foreshore leads to cliff-top ground motions that may have the potential to weaken the integrity of the rocks and prepare them for failure. In order to understand wave-cliff interaction and how beach morphodynamics influences cliff-top ground motion and cliff erosion, two field experiments were carried out simultaneously at two locations in Northern Brittany (France). This three-month long winter field campaign (Jan-Mar 2016) included, for the first time, a comparison of cliff-top ground motion and cliff erosion at sites fronted by different beach morphologies (reflective/dissipative), along with monitoring of hydrodynamic forcing and beach topography. The magnitude of cliff-top displacements at both sites were dependent on tidal stage and free water surface elevation at the cliff toe, with the greatest contributions of cliff-top ground motions found at infragravity frequencies (0.05-0.005 Hz). Vertical displacements at infragravity and incident sea-swell (0.1-0.5 Hz) frequencies were greater at the dissipative site, apart from during spring high tide and energetic wave conditions, where displacements were two times that at the reflective site. Combining these wave-cliff interaction data with beach morphology and nearshore bathymetry will be key to understanding the spatial variability in cliff erosion under a variety of environmental settings and forcing conditions.

  8. Dynamics and Control of the GyrpPTO Wave Energy Point Absorber under Sea Waves

    DEFF Research Database (Denmark)

    Zhang, Zili; Nielsen, Søren R. K.; Basu, Biswajit

    2017-01-01

    The Gyroscopic Power Take-Off (GyroPTO) wave energy point absorber has the operational principle somewhat similar to the so-called gyroscopic hand wrist exerciser. Inside the float of GyroPTO, there is a mechanical system made up of a spinning flywheel with its spin axis in rolling contact...

  9. Wave loadings acting on innovative rubble mound breakwater for overtopping wave energy conversion

    DEFF Research Database (Denmark)

    Contestabile, Pasquale; Iuppa, Claudio; Lauro, Enrico Di

    2017-01-01

    Highlights •An innovative breakwater for overtopping wave energy conversion has been studied. •Physical model tests have been carried out and analysed. •Breakwater design information on loadings acting on various parts of the structure has been presented. •Design formulae and validation of some...

  10. Performance Assessment of the Wave Dragon Wave Energy Converter Based on the EquiMar Methodology

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Chozas, Julia Fernandez; Pecher, Arthur

    2011-01-01

    At the present pre-commercial phase of the wave energy sector, device developers are called to provide reliable estimates on power performance and production at possible deployment locations. The EU EquiMar project has proposed a novel approach, where the performance assessment is based mainly...

  11. WEC3: Wave Energy Converter Code Comparison Project: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Combourieu, Adrien; Lawson, Michael; Babarit, Aurelien; Ruehl, Kelley; Roy, Andre; Costello, Ronan; Laporte Weywada, Pauline; Bailey, Helen

    2017-01-01

    This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

  12. Stochastic Control of Inertial Sea Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Mattia Raffero

    2015-01-01

    Full Text Available The ISWEC (inertial sea wave energy converter is presented, its control problems are stated, and an optimal control strategy is introduced. As the aim of the device is energy conversion, the mean absorbed power by ISWEC is calculated for a plane 2D irregular sea state. The response of the WEC (wave energy converter is driven by the sea-surface elevation, which is modeled by a stationary and homogeneous zero mean Gaussian stochastic process. System equations are linearized thus simplifying the numerical model of the device. The resulting response is obtained as the output of the coupled mechanic-hydrodynamic model of the device. A stochastic suboptimal controller, derived from optimal control theory, is defined and applied to ISWEC. Results of this approach have been compared with the ones obtained with a linear spring-damper controller, highlighting the capability to obtain a higher value of mean extracted power despite higher power peaks.

  13. Floating attenuator wave energy device. Wavegen HYDRA project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Wavegen Project which set out to develop a floating externally tensioned articulated wave-energy generator based on work carried out at RMCS Shrivenham in the 1980s has been abandoned until further notice. The computer modelling carried out in the early days indicated much promise, but the promise turned to disappointment when difficulties cropped-up in attempting to put the design into practice. A particular problem arose in matching the external tension to an equivalent beam stiffness to tune the natural bending frequency of the raft to that of the driving waves. A further eleven practical problems encountered are discussed.

  14. Les enjeux du développement des énergies renouvelables : Les enjeux territoriaux

    OpenAIRE

    Fournier, Mauricette; Grison, Jean-Baptiste; Rieutort, Laurent

    2012-01-01

    L'approche spatiale des enjeux du développement des énergies renouvelables permet de rappeler que les géographes s'intéressent aux questions énergétiques comme clé de lecture des territoires. À l'échelle mondiale, même si la part de consommation énergétique provenant des sources d'énergie renouvelables reste faible (8 %), la production connaît une croissance sensible, y compris dans certains pays émergents, laissant augurer un début de transition énergétique. Les cartes de distribution de la ...

  15. Les énergies renouvelables pour le redressement productif ?

    OpenAIRE

    Lermant, Nicolas

    2016-01-01

    Quels sont les axes de travail du ministère du redressement productif (MRP) pour le développement des filières de production d’énergies renouvelables ? Le travail par filières est un axe fort de la politique industrielle du gouvernement et en particulier du ministère du redressement productif. En ce qui concerne les énergies renouvelables, le travail s’organise au travers du comité stratégique de filière pour les eco-industries (COSEI) avec une panoplie de politiques publiques faites pour acc...

  16. Draft for an European Parliament and Council directive to foster domestic market of electricity produced from renewable energy resources; Proposition de Directive du Parlement Europeen et du Conseil relative a la promotion de l'electricite produite a partir de sources d'energie renouvelables sur le marche interieur de l'electricite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-06-06

    This document contains two parts, an exposition of motives and the proposal. The draft of directive has as objective the creation of an EU frame for boosting on a medium term the electricity production from renewable energy resources (RER). It presents a number of important measures to implement the commitment of reducing the greenhouse gas releases accepted by EU in Kyoto, particularly to increase twice, i.e., from 6% to 12%, the net domestic energy consumption, as established by the White Book on renewable energies and approved by the European Council in May 1998. RER include: Wind Power, Solar Energy, Geothermal Energy, Wave Power, Tidal Power, Hydroelectric Power (of capacity lower than 10 MW) and Biomass The exposition of motives contains six sections: - 1. Introduction; - 2. Detailed outlook of the proposal;- 3. Expertise panel; - 4. Impact on enterprises; - 5. Consulting during drafting the proposal; - 6. Conclusions. The second part displays the proposal in the following six chapters: - 1. Domain of application and definitions; -2. National objectives of the consumption of electricity produced from renewable energy resources; -3. Access of electricity produced from renewable energy resources to the interior domestic energy market; -4. Management procedures; -5. Questions concerning the distribution grid; -6. Final directions. An Appendix is given presenting the indicative figures as objectives of the Member States. So, the RER fraction in the total electricity consumption in the Member States in 2010 as percentage/TWh should looks like: Austria, 78.1/55.3; Belgium, 6.0/6.3; Denmark, 29.0/12.9; Finland, 35.0/33.7; France, 21.0/112.9; Germany, 12.5/76.4; Greece, 20.1/14.5; Ireland, 13.2/4.5; Italy, 25.0/89.6; Luxemburg, 5.7/0.5; Netherlands, 12.0/15.9; Portugal, 45.6/28.3; Spain, 29.4/76.6; Sweden, 60.0/97.5; United Kingdom, 10.0/50.0. Thus, the global figures for the European Union would be 22.1/674.9.

  17. Modeling and Simulation of a Wave Energy Converter INWAVE

    Directory of Open Access Journals (Sweden)

    Seung Kwan Song

    2017-01-01

    Full Text Available INGINE Inc. developed its own wave energy converter (WEC named INWAVE and has currently installed three prototype modules in Jeju Island, Korea. This device is an on-shore-type WEC that consists of a buoy, pulleys fixed to the sea-floor and a power take off module (PTO. Three ropes are moored tightly on the bottom of the buoy and connected to the PTO via the pulleys, which are moving back and forth according to the motion of the buoy. Since the device can harness wave energy from all six degrees of movement of the buoy, it is possible to extract energy efficiently even under low energy density conditions provided in the coastal areas. In the PTO module, the ratchet gears convert the reciprocating movement of the rope drum into a uni-directional rotation and determine the transmission of power from the relation of the angular velocities between the rope drum and the generator. In this process, the discontinuity of the power transmission occurs and causes the modeling divergence. Therefore, we introduce the concept of the virtual torsion spring in order to prevent the impact error in the ratchet gear module, thereby completing the PTO modeling. In this paper, we deal with dynamic analysis in the time domain, based on Newtonian mechanics and linear wave theory. We derive the combined dynamics of the buoy and PTO modules via geometric relation between the buoy and mooring ropes, then suggest the ratchet gear mechanism with the virtual torsion spring element to reduce the dynamic errors during the phase transitions. Time domain simulation is carried out under irregular waves that reflect the actual wave states of the installation area, and we evaluate the theoretical performance using the capture width ratio.

  18. Impact of Tidal Level Variations on Wave Energy Absorption at Wave Hub

    Directory of Open Access Journals (Sweden)

    Valeria Castellucci

    2016-10-01

    Full Text Available The energy absorption of the wave energy converters (WEC characterized by a limited stroke length —like the point absorbers developed at Uppsala University—depends on the sea level variation at the deployment site. In coastal areas characterized by high tidal ranges, the daily energy production of the generators is not optimal. The study presented in this paper quantifies the effects of the changing sea level at the Wave Hub test site, located at the south-west coast of England. This area is strongly affected by tides: the tidal height calculated as the difference between the Mean High Water Spring and the Mean Low Water Spring in 2014 was about 6.6 m. The results are obtained from a hydro-mechanic model that analyzes the behaviour of the point absorber at the Wave Hub, taking into account the sea state occurrence scatter diagram and the tidal time series at the site. It turns out that the impact of the tide decreases the energy absorption by 53%. For this reason, the need for a tidal compensation system to be included in the design of the WEC becomes compelling. The economic advantages are evaluated for different scenarios: the economic analysis proposed within the paper allows an educated guess to be made on the profits. The alternative of extending the stroke length of the WEC is investigated, and the gain in energy absorption is estimated.

  19. Dynamics and Control of the GyrpPTO Wave Energy Point Absorber under Sea Waves

    DEFF Research Database (Denmark)

    Zhang, Zili; Nielsen, Søren R. K.; Basu, Biswajit

    2017-01-01

    The Gyroscopic Power Take-Off (GyroPTO) wave energy point absorber has the operational principle somewhat similar to the so-called gyroscopic hand wrist exerciser. Inside the float of GyroPTO, there is a mechanical system made up of a spinning flywheel with its spin axis in rolling contact...... between the spin axis and the flywheel, which also makes semi-active control of the device possible. A 4-DOF model is then established, and simulation results show the introduced magnetic coupling successfully enables synchronization of the device under non-harmonic sea waves....

  20. Wave loadings acting on Overtopping Breakwater for Energy Conversion

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Nørgaard, Jørgen Harck; Contestabile, Pasquale

    2013-01-01

    Any kind of Wave Energy Converter (WEC) requires information on reliability of technology and on time required for the return of the investment (reasonable payback). The structural response is one of the most important parameters to take in to account for a consistent assessment on innovative...... distributions. Load measurements were compared with the most used prediction method for traditional breakwaters, available in the Coastal Engineering Manual (U.S. Army Corps of Engineers, 2002). These results suggest to use the experimental data as design loadings since the design criteria for the innovative...... the incoming wave to produce electricity. 2D hydraulic model tests were carried out at the Department of Civil Engineering, Aalborg University (Denmark). The analyses of hydraulic model tests have identified the main shapes assumed by wave surfaces at the breakwater and respective spatial and temporal pressure...

  1. Identification of Swell in Nearshore Surface Wave Energy Spectra

    Directory of Open Access Journals (Sweden)

    Paul A. Work

    2010-06-01

    Full Text Available An approach for routine identification of swell and sea in nominally fully developed, omnidirectional, surface water wave energy spectra measured in arbitrary water depth is developed, applied, and discussed. The methodology is an extension of earlier work with deepwater spectra and involves identifying the frequency at which wave steepness is maximized and relating this to the swell separation frequency. The TMA parameterized spectrum is employed to establish a relationship between the two frequencies so that the methodology can be used when wind data are unavailable. The methodology is developed for finite water depth and tested using a dataset that includes both acoustic Doppler current profiler and wave buoy data, recorded simultaneously at the same location. For cases where the sea and swell are clearly, visually distinguishable in the omnidirectional spectra, the new method accurately distinguishes between the two, but it can also be used to identify sea and swell in unimodal spectra.

  2. Power inversion design for ocean wave energy harvesting

    Science.gov (United States)

    Talebani, Anwar N.

    The needs for energy sources are increasing day by day because of several factors, such as oil depletion, and global climate change due to the higher level of CO2, so the exploration of various renewable energy sources is very promising area of study. The available ocean waves can be utilized as free source of energy as the water covers 70% of the earth surface. This thesis presents the ocean wave energy as a source of renewable energy. By addressing the problem of designing efficient power electronics system to deliver 5 KW from the induction generator to the grid with less possible losses and harmonics as possible and to control current fed to the grid to successfully harvest ocean wave energy. We design an AC-DC full bridge rectifier converter, and a DC-DC boost converter to harvest wave energy from AC to regulated DC. In order to increase the design efficiency, we need to increase the power factor from (0.5-0.6) to 1. This is accomplished by designing the boost converter with power factor correction in continues mode with RC circuit as an input to the boost converter power factor correction. This design results in a phase shift between the input current and voltage of the full bridge rectifier to generate a small reactive power. The reactive power is injected to the induction generator to maintain its functionality by generating a magnetic field in its stator. Next, we design a single-phase pulse width modulator full bridge voltage source DC-AC grid-tied mode inverter to harvest regulated DC wave energy to AC. The designed inverter is modulated by inner current loop, to control current injected to the grid with minimal filter component to maintain power quality at the grid. The simulation results show that our design successfully control the current level fed to the grid. It is noteworthy that the simulated efficiency is higher than the calculated one since we used an ideal switch in the simulated circuit.

  3. Experimental Wave Tank Test for Reference Model 3 Floating-Point Absorber Wave Energy Converter Project

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lawson, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Li, Y. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Previsic, M. [Re Vision Consulting, Sacramento, CA (United States); Epler, J. [Re Vision Consulting, Sacramento, CA (United States); Lou, J. [Oregon State Univ., Corvallis, OR (United States)

    2015-01-01

    The U.S. Department of Energy established a reference model project to benchmark a set of marine and hydrokinetic technologies including current (tidal, open-ocean, and river) turbines and wave energy converters. The objectives of the project were to first evaluate the status of these technologies and their readiness for commercial applications. Second, to evaluate the potential cost of energy and identify cost-reduction pathways and areas where additional research could be best applied to accelerate technology development to market readiness.

  4. Study of a Novel Oscillating Surge Wave Energy Converter: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Tom, Nathan M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Choiniere, Michael [University of Maine; Thiagarajan, Krish P. [University of Maine

    2017-08-01

    This study investigates the performance of an oscillating surge wave energy converter (OSWEC) that utilizes adjustable geometry as a means of controlling the hydrodynamic coefficients, a concept originally proposed by [1]. The body of the device consists of a bottom-hinged solid rectangular frame with five horizontal flaps spanning the interior of the frame. The flaps can rotate independently about their center of rotation within the frame like a large window shutter. Changing the orientation of the flaps alters the hydrodynamic coefficients and natural frequency of the device as well as the ability to shed or absorb structural loads accordingly. This ability may allow the device to operate in a wider range of sea states than other current wave energy converter designs. This paper presents and compares the results of numerical simulations and experimental testing of the OSWEC's response to regular waves with all five of the horizontal fin configurations sharing the same orientation of 0 degrees (fully closed interior) and 90 degrees (fully open). The numerical simulations were performed using WAMIT, which calculates hydrodynamic coefficients using a boundary element method code to solve the linear potential flow problem, and WEC-Sim, a MATLAB-based tool that simulates multibody devices in the time domain by solving the governing equations of motion. A 1:14 scale model of the device was built for experimental evaluation in an 8-m-long, 1-m wide wave tank, which supports a water depth of 0.7 m. The OSWEC motion in different wave conditions was measured with displacement sensors while nonlinear wave-structure interaction effects like slamming and overtopping were captured using a high-speed camera and used to understand differences between the simulation and experiments.

  5. Direct Drive Wave Energy Buoy – 33rd scale experiment

    Energy Technology Data Exchange (ETDEWEB)

    Rhinefrank, Kenneth E. [Columbia Power Technologies, Inc.; Lenee-Bluhm, Pukha [Columbia Power Technologies, Inc.; Prudell, Joseph H. [Columbia Power Technologies, Inc.; Schacher, Alphonse A.; Hammagren, Erik J.; Zhang, Zhe [Columbia Power Technologies, Inc.

    2013-07-29

    Columbia Power Technologies (ColPwr) and Oregon State University (OSU) jointly conducted a series of tests in the Tsunami Wave Basin (TWB) at the O.H. Hinsdale Wave Research Laboratory (HWRL). These tests were run between November 2010 and February 2011. Models at 33rd scale representing Columbia Power’s Manta series Wave Energy Converter (WEC) were moored in configurations of one, three and five WEC arrays, with both regular waves and irregular seas generated. The primary research interest of ColPwr is the characterization of WEC response. The WEC response will be investigated with respect to power performance, range of motion and generator torque/speed statistics. The experimental results will be used to validate a numerical model. The primary research interests of OSU include an investigation into the effects of the WEC arrays on the near- and far-field wave propagation. This report focuses on the characterization of the response of a single WEC in isolation. To facilitate understanding of the commercial scale WEC, results will be presented as full scale equivalents.

  6. Initial Assessment of Mooring Solutions for Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Delaney, Martin

    2016-01-01

    The present study investigates three different types of mooring systems in order to establish potential cost reductions and applicability to wave energy converters (WECs). Proposed mooring systems for three existing WECs create the basis for this study, and the study highlights areas of interest ...... type system can provide a paramount cost reduction compared to a traditional CALM type system with chain lines. Similarly, use of nylon ropes similarly appears to provide low cost....

  7. Concept Study of Foundation Systems for Wave Energy Converters

    DEFF Research Database (Denmark)

    Molina, Salvador Devant; Vaitkunaite, Evelina; Ibsen, Lars Bo

    Analysis of possible foundation solution for Wave Energy Converters (WEC) is presented by investigating and optimizing novel foundation systems recently developed for offshore wind turbines. Gravity based, pile and bucket foundations are innovative foundation systems that are analyzed. Concept...... studies for all three foundation systems, geotehcnical design methods of foundations and discussion about the differences in the means of structural design, installation and cost are presented in the paper....

  8. Different reliability assessment approaches for wave energy converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kramer, Morten Mejlhede; Sørensen, John Dalsgaard

    2015-01-01

    Reliability assessments are of importance for wave energy converters (WECs) due to the fact that accessibility might be limited in case of failure and maintenance. These failure rates can be adapted by reliability considerations. There are two different approaches to how reliability can be estima...... be estimated: the so-called classical reliability theory and the probabilistic reliability theory. The classical reliability theory is often used for failure rate estimations of mechanical and electrical components, whereas the probabilistic reliability theory is …...

  9. Efficiency of a gyroscopic device for conversion of mechanical wave energy to electrical energy

    DEFF Research Database (Denmark)

    Carlsen, Martin; Darula, Radoslav; Gravesen, Jens

    2011-01-01

    We consider a recently proposed gyroscopic device for conversion of mechanical ocean wave energy to electrical energy. Two models of the device derived from standard engineering mechanics from the literature are analysed, and a model is derived from analytical mechanics considerations. From...

  10. Shock Wave Energy Dissipation using Polymerized Ionic Liquids

    Science.gov (United States)

    Lee, Jaejun; Ren, Yi; Evans, Christopher; Moore, Jeffrey; Sottos, Nancy

    2017-06-01

    Polymerized ionic liquids composed of alkyl-imidazolium cations and bis(trifluoromethane)sulfonamide anions exhibit intriguing shock wave energy absorption performance. In prior work, we observed a shock-induced disorder-to-order change in network forming ionic liquids. We hypothesize that this shock-induced ordering is strongly associated with the microstructure of the ionic liquids. Polymerized ionic liquids, which have similar microstructures but slower relaxation times compared to the ionic liquids, are prepared to demonstrate the ordering transition mechanism and to exploit relaxation processes for the energy dissipation. By employing size-tunable alkyl backbone spacers between cations, we explore the effect of the relative microstructural heterogeneity on the activation of shock-induced ordering. Relaxation time, which is adjustable by the alkyl spacer length, also plays an important role in the energy dissipation process. Absorption properties of a series of thin film (ca. 50 μm) polymerized ionic liquids are evaluated using a laser-induced shock wave testing protocol. Superior shock wave mitigating performance of polymerized ionic liquids was achieved compared to polyurea films.

  11. Energy supply technologies. Hydro, ocean, wave and tidal

    Energy Technology Data Exchange (ETDEWEB)

    Fenhann, J.; Larsen, Hans [Risoe National Lab. - DTU (Denmark)

    2007-11-15

    This chapter presents an overview of current hydro, ocean, wave and tidal initiatives. Large hydro remains one of the lowest-cost generating technologies, although environmental constraints, resettlement impacts and the limited availability of sites have restricted further growth in many countries. Large hydro supplied 16 % of global electricity in 2004, down from 19 % a decade ago. Large hydro capacity totalled about 720 GW worldwide in 2004 and has grown historically at slightly more than 2 % annually. China installed nearly 8 GW of large hydro in 2004, taking the country to number one in terms of installed capacity (74 GW). With the completion of the Three Gorges Dam, China will add some 18.2 GW of hydro capacity in 2009. The socio-economic benefits of hydro include improved flood control and water supply. The socio-economic benefits of hydro include improved flood control and water supply. The socio-economic cost of hydro includes displacements and submergence. Further hydro can improve peak-capacity management. Ocean currents, some of which runs close to European coasts, carry a lot of kinetic energy. Part of this energy can be captured by sub-marine windmills and converted into electricity. These are more compact than the wind turbines used on land, simply because water is much denser than air. The main European countries with useful current power potential are France and the UK. Ocean tides are driven by the gravitational pull of the moon. With one high tide every 12 hours, a tidal power plant can operate for only four or five hours per cycle, so power from a single plant is intermittent. A suitably-designed tidal plant can, however, operate as a pimped storage system, using electricity during periods of low demand to store energy that can be recovered later. The only large, modern example of a tidal power plant is the 240 MW La Rance plant, built in France in the 1960s, which represents 91 % of the world tidal power capacity. Wave energy can be seen as

  12. Wave

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo

    2008-01-01

    Estimates for the amount of potential wave energy in the world range from 1-10 TW. The World Energy Council estimates that a potential 2TW of energy is available from the world’s oceans, which is the equivalent of twice the world’s electricity production. Whilst the recoverable resource is many...... times smaller it remains very high. For example, whilst there is enough potential wave power off the UK to supply the electricity demands several times over, the economically recoverable resource for the UK is estimated at 25% of current demand; a lot less, but a very substantial amount nonetheless....

  13. Hydraulic evaluation of the Crest Wing wave energy converter

    Energy Technology Data Exchange (ETDEWEB)

    Kofoed, J.P.; Antonishen, M.

    2008-09-15

    The Crest Wing Wave Energy Converter is currently being developed by Henning Pilgaard, of WaveEnergyFyn, Denmark. It is meant to act like a carpet on the water, conforming to the shape of each wave and using that movement to generate power. The thought of making a WEC that acts like a carpet on top of the waves is not new; ongoing or past projects such as the Pelamis and Cockerel Raft were designed with this thought in mind. The real difference with the Crest Wing is that it has skirt drafts, that extend down into the water and create suction; this increases the effective mass of the WEC while minimizing the material use. Special attention was given to the design of the first and last floaters as they are meant to act as a smooth transition between wave and machine. Their purpose is to make sure that no air gets under the two middle floaters so that suction is not broken and the device continues to function well. In summary the Crest Wing functions and is able to produce power with a good overall efficiency. The configuration with relative reference PTO (Power Take Off) is superior. It has not been proven that the idea of mounting skirts on the floaters is leading to a better performance. Thus, the study leads to the conclusion that the idea of making a simple hinged raft type device is good, and it is likely that the construction cost for a device of this type can be kept down. However, the study also leaves the chance that some limited draft of skirts in combination with inlet/outlet devices, could prove beneficial. In case of further testing on this device, an effort should be made to design and construct a more easily and accurately controlled PTO model in the test setup. This could greatly improve the quality of the output of such tests. (ln)

  14. Performance of a Tethered Point Wave-Energy Absorber in Regular and Irregular Waves

    KAUST Repository

    Bachynski, Erin E.

    2010-01-01

    The importance of the mooring system on the dynamic response of a point-absorber type ocean-wave energy converter (WEC) is investigated using a frequency-domain approach. In order to ensure the safety of WECs, careful consideration of the response and resonance frequencies in all motions must be evaluated, including the effects of the mooring system. In this study, a WEC floater with a closed, flat bottom is modeled as a rigid vertical cylinder tethered by elastic mooring lines. The WEC hydrodynamic added mass and damping are obtained using established potential-flow methods, with additional damping provided by the energy-extraction system. The results show that the response of the WEC, and the corresponding power takeoff, varies with the diameter-to-draft (D=T) ratio, mooring system stiffness, and mass distribution. For a given wave climate in Northern California, near San Francisco, the heave energy extraction is found to be best for a shallow WEC with a soft mooring system, compared to other systems that were examined. This result assumes a physical limit (cap) on the motion which is related to the significant wave height to draft ratio. Shallow draft designs, however, may experience excessive pitch motions and relatively larger viscous damping. In order to mitigate the pitch response, the pitch radius of gyration should be small and the center of mass should be low. Copyright © 2010 by ASME.

  15. Balancing Power Absorption and Fatigue Loads in Irregular Waves for an Oscillating Surge Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Tom, Nathan M.; Yu, Yi-Hsiang; Wright, Alan D.; Lawson, Michael

    2016-06-24

    The aim of this paper is to describe how to control the power-to-load ratio of a novel wave energy converter (WEC) in irregular waves. The novel WEC that is being developed at the National Renewable Energy Laboratory combines an oscillating surge wave energy converter (OSWEC) with control surfaces as part of the structure; however, this work only considers one fixed geometric configuration. This work extends the optimal control problem so as to not solely maximize the time-averaged power, but to also consider the power-take-off (PTO) torque and foundation forces that arise because of WEC motion. The objective function of the controller will include competing terms that force the controller to balance power capture with structural loading. Separate penalty weights were placed on the surge-foundation force and PTO torque magnitude, which allows the controller to be tuned to emphasize either power absorption or load shedding. Results of this study found that, with proper selection of penalty weights, gains in time-averaged power would exceed the gains in structural loading while minimizing the reactive power requirement.

  16. Relationship between wave energy and free energy from pickup ions in the Comet Halley environment

    Science.gov (United States)

    Huddleston, D. E.; Johnstone, A. D.

    1992-01-01

    The free energy available from the implanted heavy ion population at Comet Halley is calculated by assuming that the initial unstable velocity space ring distribution of the ions evolves toward a bispherical shell. Ultimately this free energy adds to the turbulence in the solar wind. Upstream and downstream free energies are obtained separately for the conditions observed along the Giotto spacecraft trajectory. The results indicate that the waves are mostly upstream propagating in the solar wind frame. The total free energy density always exceeds the measured wave energy density because, as expected in the nonlinear process of ion scattering, the available energy is not all immediately released. An estimate of the amount which has been released can be obtained from the measured oxygen ion distributions and again it exceeds that observed. The theoretical analysis is extended to calculate the k spectrum of the cometary-ion-generated turbulence.

  17. Wind, Wave, and Tidal Energy Without Power Conditioning

    Science.gov (United States)

    Jones, Jack A.

    2013-01-01

    Most present wind, wave, and tidal energy systems require expensive power conditioning systems that reduce overall efficiency. This new design eliminates power conditioning all, or nearly all, of the time. Wind, wave, and tidal energy systems can transmit their energy to pumps that send high-pressure fluid to a central power production area. The central power production area can consist of a series of hydraulic generators. The hydraulic generators can be variable displacement generators such that the RPM, and thus the voltage, remains constant, eliminating the need for further power conditioning. A series of wind blades is attached to a series of radial piston pumps, which pump fluid to a series of axial piston motors attached to generators. As the wind is reduced, the amount of energy is reduced, and the number of active hydraulic generators can be reduced to maintain a nearly constant RPM. If the axial piston motors have variable displacement, an exact RPM can be maintained for all, or nearly all, wind speeds. Analyses have been performed that show over 20% performance improvements with this technique over conventional wind turbines

  18. Reference Model 6 (RM6): Oscillating Wave Energy Converter.

    Energy Technology Data Exchange (ETDEWEB)

    Bull, Diana L; Smith, Chris; Jenne, Dale Scott; Jacob, Paul; Copping, Andrea; Willits, Steve; Fontaine, Arnold; Brefort, Dorian; Gordon, Margaret Ellen; Copeland, Robert; Jepsen, Richard Alan

    2014-10-01

    This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter reference model design in a complementary manner to Reference Models 1-4 contained in the above report. In this report, a conceptual design for an Oscillating Water Column Wave Energy Converter (WEC) device appropriate for the modeled reference resource site was identified, and a detailed backward bent duct buoy (BBDB) device design was developed using a combination of numerical modeling tools and scaled physical models. Our team used the methodology in SAND2013-9040 for the economic analysis that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays, up to 100 devices. The methodology was applied to identify key cost drivers and to estimate levelized cost of energy (LCOE) for this RM6 Oscillating Water Column device in dollars per kilowatt-hour ($/kWh). Although many costs were difficult to estimate at this time due to the lack of operational experience, the main contribution of this work was to disseminate a detailed set of methodologies and models that allow for an initial cost analysis of this emerging technology. This project is sponsored by the U.S. Department of Energy's (DOE) Wind and Water Power Technologies Program Office (WWPTO), within the Office of Energy Efficiency & Renewable Energy (EERE). Sandia National Laboratories, the lead in this effort, collaborated with partners from National Laboratories, industry, and universities to design and test this reference model.

  19. Floating attenuator wave energy device: Wavegen HYDRA project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This report describes research funded by the Department of Trade and Industry (DTI) into the feasibility of developing and constructing a floating attenuator wave energy device known as HYDRA following initial studies by Wavegen. HYDRA is a floating externally tensioned articulated raft wave energy generator based on work by Professor FJM Farley and colleagues during the 1980s. The project's first four work tasks confirmed the theoretical potential of the device but also highlighted significant practical problems in translating that potential into a viable design. It was therefore decided not to proceed further, i.e. not to construct and test a prototype device. The report provides a general description of the device and describes the results of the initial analysis and the first series of model tests. It then discusses device design and component testing and explains the methodology for determining device performance at a particular site and mathematical modelling of a one-third scale device. To help future research and development programmes, the report emphasises the generic problems associated with the development of wave devices.

  20. Energy scavenging system by acoustic wave and integrated wireless communication

    Science.gov (United States)

    Kim, Albert

    The purpose of the project was developing an energy-scavenging device for other bio implantable devices. Researchers and scientist have studied energy scavenging method because of the limitation of traditional power source, especially for bio-implantable devices. In this research, piezoelectric power generator that activates by acoustic wave, or music was developed. Follow by power generator, a wireless communication also integrated with the device for monitoring the power generation. The Lead Zirconate Titanate (PZT) bimorph cantilever with a proof mass at the free end tip was studied to convert acoustic wave to power. The music or acoustic wave played through a speaker to vibrate piezoelectric power generator. The LC circuit integrated with the piezoelectric material for purpose of wireless monitoring power generation. However, wireless monitoring can be used as wireless power transmission, which means the signal received via wireless communication also can be used for power for other devices. Size of 74 by 7 by 7cm device could generate and transmit 100mVp from 70 mm distance away with electrical resonant frequency at 420.2 kHz..

  1. Technical Submission Form: Technical Specification of a Wave Energy Farm.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Kim Nielsen; Ben Kennedy; Bull, Diana L; Costello, Ronan Patrick; Jochem Weber

    2017-04-01

    The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be made by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.

  2. Licensing and Environmental Issues of Wave Energy Projects

    DEFF Research Database (Denmark)

    Neumann, Frank; Tedd, James; Prado, Miguel

    2006-01-01

    The major non-technical barrier for large-scale wave energy implementation is the wide range of licensing issues and potential environmental concerns, in addition to significant National/regional differences in licensing procedures and permit requirements. Whereas some pilot plants have had...... as concerning ocean space use and environmental concerns. Despite recent efforts to streamline European EIA (Environmental Impact Assessment) in general, potential project developers are far from having a clear view of present and future requirements concerning these barriers on a trans-national level...... pilot plants and exemplary presents the ongoing permitting process of the Wave Dragon in Wales. Comments on future park-scale application issues are made based on the present situation in different countries....

  3. Wave energy absorption by a floating air bag

    DEFF Research Database (Denmark)

    Kurniawan, Adi; Chaplin, John; Greaves, Deborah

    2017-01-01

    properties, which are successfully predicted numerically. Owing to its compressibility, the device can have a heave resonance period longer than that of a rigid device of the same shape and size, without any phase control. Furthermore, varying the amount of air in the bag is found to change its shape......A floating air bag, ballasted in water, expands and contracts as it heaves under wave action. Connecting the bag to a secondary volume via a turbine transforms the bag into a device capable of generating useful energy from the waves. Small-scale measurements of the device reveal some interesting...... and hence its dynamic response, while varying the turbine damping or the air volume ratio changes the dynamic response without changing the shape....

  4. Energy scaling of terahertz-wave parametric sources.

    Science.gov (United States)

    Tang, Guanqi; Cong, Zhenhua; Qin, Zengguang; Zhang, Xingyu; Wang, Weitao; Wu, Dong; Li, Ning; Fu, Qiang; Lu, Qingming; Zhang, Shaojun

    2015-02-23

    Terahertz-wave parametric oscillators (TPOs) have advantages of room temperature operation, wide tunable range, narrow line-width, good coherence. They have also disadvantage of small pulse energy. In this paper, several factors preventing TPOs from generating high-energy THz pulses and the corresponding solutions are analyzed. A scheme to generate high-energy THz pulses by using the combination of a TPO and a Stokes-pulse-injected terahertz-wave parametric generator (spi-TPG) is proposed and demonstrated. A TPO is used as a source to generate a seed pulse for the surface-emitted spi-TPG. The time delay between the pump and Stokes pulses is adjusted to guarantee they have good temporal overlap. The pump pulses have a large pulse energy and a large beam size. The Stokes beam is enlarged to make its size be larger than the pump beam size to have a large effective interaction volume. The experimental results show that the generated THz pulse energy from the spi-TPG is 1.8 times as large as that obtained from the TPO for the same pumping pulse energy density of 0.90 J/cm(2) and the same pumping beam size of 3.0 mm. When the pumping beam sizes are 5.0 and 7.0 mm, the enhancement times are 3.7 and 7.5, respectively. The spi-TPG here is similar to a difference frequency generator; it can also be used as a Stokes pulse amplifier.

  5. Marine Hydrokinetic Energy Site Identification and Ranking Methodology Part I: Wave Energy

    Energy Technology Data Exchange (ETDEWEB)

    Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-10-01

    Marine hydrokinetic energy is a promising and growing piece of the renewable energy sector that offers high predictability and additional energy sources for a diversified energy economy. This report investigates the market opportunities for wave energy along the U.S. coastlines. It is part one of a two-part investigation into the United State's two largest marine hydrokinetic resources (wave and tidal). Wave energy technology is still an emerging form of renewable energy for which large-scale, grid-connected project costs are currently poorly defined. Ideally, device designers would like to know the resource conditions at economical project sites so they can optimize device designs. On the other hand, project developers need detailed device cost data to identify sites where projects are economical. That is, device design and siting are, to some extent, a coupled problem. This work describes a methodology for identifying likely deployment locations based on a set of criteria that wave energy experts in industry, academia, and national laboratories agree are likely to be important factors for all technology types. This work groups the data for the six criteria into 'locales' that are defined as the smaller of either the local transmission grid or a state boundary. The former applies to U.S. islands (e.g., Hawaii, American Samoa) and rural villages (e.g., in Alaska); the latter applies to states in the contiguous United States. These data are then scored from 0 to 10 according to scoring functions that were developed with input from wave energy industry and academic experts. The scores are aggregated using a simple product method that includes a weighting factor for each criterion. This work presents two weighting scenarios: a long-term scenario that does not include energy price (weighted zero) and a near term scenario that includes energy price. The aggregated scores are then used to produce ranked lists of likely deployment locales. In both scenarios

  6. Impact of Generator Stroke Length on Energy Production for a Direct Drive Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Yue Hong

    2016-09-01

    Full Text Available The Lysekil wave energy converter (WEC, developed by the wave energy research group of Uppsala University, has evolved through a variety of mechanical designs since the first prototype was installed in 2006. The hundreds of engineering decisions made throughout the design processes have been based on a combination of theory, know-how from previous experiments, and educated guesses. One key parameter in the design of the WECs linear generator is the stroke length. A long stroke requires a taller WEC with associated economical and mechanical challenges, but a short stroke limits the power production. The 2-m stroke of the current WECs has been an educated guess for the Swedish wave climate, though the consequences of this choice on energy absorption have not been studied. When the WEC technology is considered for international waters, with larger waves and challenges of energy absorption and survivability, the subject of stroke length becomes even more relevant. This paper studies the impact of generator stroke length on energy absorption for three sites off the coasts of Sweden, Chile and Scotland. 2-m, 4-m, and unlimited stroke are considered. Power matrices for the studied WEC prototype are presented for each of the studied stroke lengths. Presented results quantify the losses incurred by a limited stroke. The results indicate that a 2-m stroke length is likely to be a good choice for Sweden, but 4-m is likely to be necessary in more energetic international waters.

  7. Advanced, High Power, Next Scale, Wave Energy Conversion Device

    Energy Technology Data Exchange (ETDEWEB)

    Mekhiche, Mike [Principal Investigator; Dufera, Hiz [Project Manager; Montagna, Deb [Business Point of Contact

    2012-10-29

    The project conducted under DOE contract DE‐EE0002649 is defined as the Advanced, High Power, Next Scale, Wave Energy Converter. The overall project is split into a seven‐stage, gated development program. The work conducted under the DOE contract is OPT Stage Gate III work and a portion of Stage Gate IV work of the seven stage product development process. The project effort includes Full Concept Design & Prototype Assembly Testing building on our existing PowerBuoy technology to deliver a device with much increased power delivery. Scaling‐up from 150kW to 500kW power generating capacity required changes in the PowerBuoy design that addressed cost reduction and mass manufacturing by implementing a Design for Manufacturing (DFM) approach. The design changes also focused on reducing PowerBuoy Installation, Operation and Maintenance (IO&M) costs which are essential to reducing the overall cost of energy. In this design, changes to the core PowerBuoy technology were implemented to increase capability and reduce both CAPEX and OPEX costs. OPT conceptually envisaged moving from a floating structure to a seabed structure. The design change from a floating structure to seabed structure would provide the implementation of stroke‐ unlimited Power Take‐Off (PTO) which has a potential to provide significant power delivery improvement and transform the wave energy industry if proven feasible.

  8. Networks of triboelectric nanogenerators for harvesting water wave energy: a potential approach toward blue energy.

    Science.gov (United States)

    Chen, Jun; Yang, Jin; Li, Zhaoling; Fan, Xing; Zi, Yunlong; Jing, Qingshen; Guo, Hengyu; Wen, Zhen; Pradel, Ken C; Niu, Simiao; Wang, Zhong Lin

    2015-03-24

    With 70% of the earth's surface covered with water, wave energy is abundant and has the potential to be one of the most environmentally benign forms of electric energy. However, owing to lack of effective technology, water wave energy harvesting is almost unexplored as an energy source. Here, we report a network design made of triboelectric nanogenerators (TENGs) for large-scale harvesting of kinetic water energy. Relying on surface charging effect between the conventional polymers and very thin layer of metal as electrodes for each TENG, the TENG networks (TENG-NW) that naturally float on the water surface convert the slow, random, and high-force oscillatory wave energy into electricity. On the basis of the measured output of a single TENG, the TENG-NW is expected to give an average power output of 1.15 MW from 1 km(2) surface area. Given the compelling features, such as being lightweight, extremely cost-effective, environmentally friendly, easily implemented, and capable of floating on the water surface, the TENG-NW renders an innovative and effective approach toward large-scale blue energy harvesting from the ocean.

  9. Wave energy resource assessment for the Indian shelf seas

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Anoop, T.R.

    K, Jayaraj J, Jayashankar V, Muruganandam TM, Santhakumar S, Ravindran M, Takao M, Setoguchi T, Toyota K, Nagata S, A twin unidirectional impulse turbine topology for OWC based wave energy plants - Experimental validation and scaling, Renewable... 17 18 19 0 1 2 3 4 M on th ly v ar ia bi lit y in de x (a) (b) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Location 2 3 4 5 R at io o f m ax im um to m ea n w av e he ig ht Figure 7. Variation of (a) monthly variability index and (b...

  10. Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenne, D. S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Copping, A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hanna, L. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-01-01

    This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversion chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.

  11. Numerical Forecasting Experiment of the Wave Energy Resource in the China Sea

    Directory of Open Access Journals (Sweden)

    Chong Wei Zheng

    2016-01-01

    Full Text Available The short-term forecasting of wave energy is important to provide guidance for the electric power operation and power transmission system and to enhance the efficiency of energy capture and conversion. This study produced a numerical forecasting experiment of the China Sea wave energy using WAVEWATCH-III (WW3, the latest version 4.18 wave model driven by T213 (WW3-T213 and T639 (WW3-T639 wind data separately. Then the WW3-T213 and WW3-T639 were verified and compared to build a short-term wave energy forecasting structure suited for the China Sea. Considering the value of wave power density (WPD, “wave energy rose,” daily and weekly total storage and effective storage of wave energy, this study also designed a series of short-term wave energy forecasting productions. Results show that both the WW3-T213 and WW3-T639 exhibit a good skill on the numerical forecasting of the China Sea WPD, while the result of WW3-T639 is much better. Judging from WPD and daily and weekly total storage and effective storage of wave energy, great wave energy caused by cold airs was found. As there are relatively frequent cold airs in winter, early spring, and later autumn in the China Sea and the surrounding waters, abundant wave energy ensues.

  12. Energy-dissipation anomaly in systems of localized waves

    Science.gov (United States)

    Gallet, Basile

    2017-05-01

    We study the statistics of the power P dissipated by waves propagating in a one-dimensional disordered medium with damping coefficient ν . An operator imposes the wave amplitude at one end, therefore injecting a power P that balances dissipation. The typical realization of P vanishes for ν →0 : Disorder leads to localization and total reflection of the wave energy back to the emitter, with negligible losses. More surprisingly, the mean dissipated power averaged over the disorder reaches a finite limit for ν →0 . We show that this "anomalous dissipation" limν→0 is directly given by the integrated density of states of the undamped system. In some cases, this allows us to compute the anomalous dissipation exactly, using properties of the undamped system only. As an example, we compute the anomalous dissipation for weak correlated disorder and for Gaussian white noise of arbitrary strength. Although the focus is on the singular limit ν →0 , we finally show that this approach is easily extended to arbitrary ν .

  13. Results of an Experimental Study of the Langlee Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter; Espedal, J.

    2010-01-01

    This paper presents the results of the first experimental study of the Langlee wave energy converter (WEC), a semi-submerged oscillating wave surge converter. Its design extracts the energy from the surge motion of the waves through two pairs of working flaps, called water wings, which are placed...

  14. Artificial upwelling using the energy of surface waves

    Science.gov (United States)

    Soloviev, A.

    2016-02-01

    The ocean is an important component of climate and climate change, since the heat capacity of a few meters of the upper ocean is equivalent to the heat capacity of the entire atmosphere. (Solar radiation and IR balance in the atmosphere are of course major factors as well.) Artificial upwelling devices using the energy of surface waves, similar to those developed by Vershinskiy, Pshenichnyy, and Soloviev (1987), can bring cold water from below the thermocline to the sea surface. Their wave-inertia pump consisted of a vertical tube, a valve, and a buoy to keep the device afloat. The device operated by using energy of surface waves to create an upward flow of water in the tube. An outlet valve at the top of the unit synchronized the operation of the device with surface waves and prevented back-splashing. A single device with a 100 m long and 1.2 m diameter tube is able to produce up to 1 m3s-1 flow of deep water to the surface. With a 10oC temperature difference over 100 m depth, the negative heat supply rate to the sea surface is 42 MW, which is equivalent to a 42 Wm-2 heat flux, if distributed over 1 km2 area. Such flux is comparable to the average net air-sea flux. This type of artificial upwelling can cool down the sea surface, modify climate on a regional scale and possibly help mitigate hurricanes. The cold water brought from the deep layer, however, has a larger density than the surface water and therefore has a tendency to sink back down. In this work, the efficiency of wave-inertia pumps has been estimated for different environmental conditions using a computational fluid dynamics model. The cooled near-surface layer of the ocean will be getting more heat from the sun, which is a detrimental consequence. Cloud seeding can help to mitigate this extra warming. A synergistic approach to climate engineering can thus reduce detriments and increase potential benefits of this system to society.

  15. Dynamics and control of the GyroPTO wave energy point absorber under sea waves

    DEFF Research Database (Denmark)

    Zhang, Zili; Nielsen, Søren R.K.; Basu, Biswajit

    2017-01-01

    The Gyroscopic Power Take-Off (GyroPTO) wave energy point absorber has the operational principle somewhat similar to the so-called gyroscopic hand wrist exerciser. Inside the float of GyroPTO, there is a mechanical system made up of a spinning flywheel with its spin axis in rolling contact...... to a ring. At certain conditions, the ring starts to rotate at a frequency equal to the excitation angular frequency. In this synchronized state, the generator is running at almost constant speed and the generated power becomes constant. In this paper, theoretical modeling of the GyroPTO device is carried...

  16. Reliability-Based Structural Optimization of Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Simon Ambühl

    2014-12-01

    Full Text Available More and more wave energy converter (WEC concepts are reaching prototypelevel. Once the prototype level is reached, the next step in order to further decrease thelevelized cost of energy (LCOE is optimizing the overall system with a focus on structuraland maintenance (inspection costs, as well as on the harvested power from the waves.The target of a fully-developed WEC technology is not maximizing its power output,but minimizing the resulting LCOE. This paper presents a methodology to optimize thestructural design of WECs based on a reliability-based optimization problem and the intentto maximize the investor’s benefits by maximizing the difference between income (e.g., fromselling electricity and the expected expenses (e.g., structural building costs or failure costs.Furthermore, different development levels, like prototype or commercial devices, may havedifferent main objectives and will be located at different locations, as well as receive varioussubsidies. These points should be accounted for when performing structural optimizationsof WECs. An illustrative example on the gravity-based foundation of the Wavestar deviceis performed showing how structural design can be optimized taking target reliability levelsand different structural failure modes due to extreme loads into account.

  17. Initial Assessment of Mooring Solutions for Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Delaney, Martin

    2016-01-01

    The present study investigates three different types of mooring systems in order to establish potential cost reductions and applicability to wave energy converters (WECs). Proposed mooring systems for three existing WECs create the basis for this study, and the study highlights areas of interest ...... type system can provide a paramount cost reduction compared to a traditional CALM type system with chain lines. Similarly, use of nylon ropes similarly appears to provide low cost.......The present study investigates three different types of mooring systems in order to establish potential cost reductions and applicability to wave energy converters (WECs). Proposed mooring systems for three existing WECs create the basis for this study, and the study highlights areas of interest...... using a preliminary cost estimation and discussion of buildability issues. Using synthetic rope and variations in the mooring configuration has the potential of influencing the cost significantly. In order to quantify this potential, a simple quasi-static analysis is performed, which shows that a SALM...

  18. Mechanism of the Shock Wave Generation and Energy Efficiency by Underwater Discharge

    Directory of Open Access Journals (Sweden)

    O Higa

    2016-09-01

    Full Text Available We are developing the rice powder manufacturing system using an underwater shock wave. The purpose of this study is to research a mechanism of the shock wave generation and energy efficiency by underwater discharge in order to increase energy of the underwater shock wave. We observed the shock wave generation using the visualization device with a high speed camera, and measured voltage current characteristics at the same time. As a result, it was clarified that countless underwater shock waves were generated at the time of water plasma expansion by discharge. But, the shock wave was not confirmed at the time of after a second peak of the damping oscillation. It was clarified that one part of charging energy was used to generation of the shock wave. Therefore, it was clarified that to release energy by the critical oscillation is desirable for efficient generation of the shock wave.

  19. Innovative wave energy device applied to coastal observatory systems

    Science.gov (United States)

    Marcelli, Marco; Bonamano, Simone; Piermattei, Viviana; Scanu, Sergio; Paladini de Mendoza, Francesco; Martellucci, Riccardo; Maximo, Peviani

    2017-04-01

    Marine environment is one of the most promising sources of renewable energy, whose exploitation could have an effect on several application fields. This work presents the design of an innovative device based on the Oscillating Water Column (OWC), that allows to convert wave energy into electricity, suitable for the typical Mediterranean wave climate. The flexibility of the device permits its installation either in deep or shallow waters, with reduced costs of deployment, maintenance and connection to the grid. Furthermore, the replicability of the design allows the device to be installed in array of several number of similar units. The technical concept is to convey the sea water within a vertical pipe, in which the water movements activate a rotor connected to a generator that transforms the energy of the water motion into electricity. The hydrodynamic design of the pipe is built to minimize the losses due to friction and turbulence and to exploit the maximum possible energy from wave motion. The wave energy is directly absorbed by the rotational movement of the turbine blades located in the water itself allowing a further reduction of the energy losses associated with the transformation of the linear water motion into electrical generation in the air phase (typical configuration of the OWC devices). In this work the device components are described considering two possible configurations that use a Wells turbine or a Bulb type turbine. The system can be realized at a low cost, because of the modularity of the device project, which allows large freedom of sizes and placements, being able to be installed both individually and in arrays. The modularity, associated with the fact that the main elements of the system are available on the market, makes the device particularly attractive from the economic point of view. Finally, it is realized with a high constructive flexibility: the proposed system can be transported floating and moored to existing coastal structures or

  20. Wave-energy distribution and hurricane effects on Margarita Reef, southwestern Puerto Rico

    Science.gov (United States)

    Lugo-Fernández, A.; Hernández-Ávila, M. L.; Roberts, H. H.

    1994-01-01

    Wave measurements at Margarita Reef in southwestern Puerto Rico show that wave height decreases as waves travel across the forereef and into the backreef. Wave spectra reveal the presence of two wave trains impinging on the reef during the study: trade-wind waves and locally generated seas. Significant wave height calculated from the spectra show an average reduction of 19.5% from 20- to 10-m isobaths and 26% from 20- to 5-m isobaths. The significant wave height decreases an average of 82% for waves traveling across the reef crest and into the backreef. Wave-energy reduction is 35% from 20- to 10-m isobaths and 45% from 20- to 5-m isobaths. Energy loss across the reef crest is 97% which translates into the formation of strong across-the-reef currents capable of moving coarse sediment. Refraction diagrams of waves impinging on the reef from the SE provide a display of wave energy distribution around the reef. The transmission coefficients calculated for trade-wind waves and locally generated seas have means of 18% and 39%, respectively. A wave height model with negligible energy dissipation, produces wave height estimates that are, in general, within the ±15% error bands. Results of wave-energy changes from this study were applied to waves representative of hurricane conditions at the reef. Aerial photographs of the reef before and after the passage of hurricanes were compared to assess the reef changes. Changes observed in the photographs are interpreted as products of sediment transport by hurricane-generated waves. The patterns of change agree with the refraction diagrams suggesting that waves were the main agents of change at margarita Reef during severe storms.

  1. Validation of Hydrodynamic Numerical Model of a Pitching Wave Energy Converter

    DEFF Research Database (Denmark)

    López, Maria del Pilar Heras; Thomas, Sarah; Kramer, Morten Mejlhede

    2017-01-01

    Validation of numerical model is essential in the development of new technologies. Commercial software and codes available simulating wave energy converters (WECs) have not been proved to work for all the available and upcoming technologies yet. The present paper presents the first stages...... of the validation process of a hydrodynamic numerical model for a pitching wave energy converter. The development of dry tests, wave flume and wave basin experiments are going to be explained, lessons learned shared and results presented....

  2. Technical and Non-Technical Issues Towards the Commercialisation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez

    The thesis “Technical and non-technical issues towards the commercialisation of wave energy converters” elaborates on the necessary steps and on the different difficulties that appear during the development of a wave energy converter (WEC). It focuses on seven key areas which appear when a WEC...... and availability. vi. It evaluates one of the most commonly claimed advantages for the wave energy sector: the predictability of waves, and assesses the value of wave forecasting in electricity markets. vii. Lastly, it reviews the economic assessment of wave energy projects. The scope of the thesis is broad...... and a collection of papers. The first part provides a brief history of wave energy, introduces the research topic, describes the different disciplines addressed in the thesis and relates them. The eight papers comprise the core part of the work. The papers address the research topic in different ways: from a legal...

  3. 21. L’éolien, une énergie renouvelable épuisable ?

    OpenAIRE

    Nadaï, Alain; Labussière, Olivier

    2017-01-01

    Une énergie renouvelable est une énergie de flux, adossée à une capacité de régénération de l’environnement naturel. Ses modalités d’exploitation ne doivent donc pas entraver ou altérer cette capacité. Si les analyses de cycle de vie et l’utilisation des terres rares (cf. V.19) sont des champs classiques pour interroger le caractère renouvelable de l’éolien industriel, une analyse mobilisant les méthodes des sciences sociales reste à mener pour examiner ses dimensions économique, sociale et t...

  4. Optimization of sources for focusing wave energy in targeted formations

    KAUST Repository

    Jeong, C

    2010-06-08

    We discuss a numerical approach for identifying the surface excitation that is necessary to maximize the response of a targeted subsurface formation. The motivation stems from observations in the aftermath of earthquakes, and from limited field experiments, whereby increased oil production rates were recorded and were solely attributable to the induced reservoir shaking. The observations suggest that focusing wave energy to the reservoir could serve as an effective low-cost enhanced oil recovery method. In this paper, we report on a general method that allows the determination of the source excitation, when provided with a desired maximization outcome at the targeted formation. We discuss, for example, how to construct the excitation that will maximize the kinetic energy in the target zone, while keeping silent the neighbouring zones. To this end, we cast the problem as an inverse-source problem, and use a partial-differential- equation-constrained optimization approach to arrive at an optimized source signal. We seek to satisfy stationarity of an augmented functional, which formally leads to a triplet of state, adjoint and control problems. We use finite elements to resolve the state and adjoint problems, and an iterative scheme to satisfy the control problem to converge to the sought source signal. We report on one-dimensional numerical experiments in the time domain involving a layered medium of semi-infinite extent. The numerical results show that the targeted formation\\'s kinetic energy resulting from an optimized wave source could be several times greater than the one resulting from a blind source choice, and could overcome the mobility threshold of entrapped reservoir oil. © 2010 Nanjing Geophysical Research Institute.

  5. A Method for Energy and Resource Assessment of Waves in Finite Water Depths

    Directory of Open Access Journals (Sweden)

    Wanan Sheng

    2017-04-01

    Full Text Available This paper presents a new method for improving the assessment of energy and resources of waves in the cases of finite water depths in which the historical and some ongoing sea wave measurements are simply given in forms of scatter diagrams or the forms of (significant wave heights and the relevant statistical wave periods, whilst the detailed spectrum information has been discarded, thus no longer available for the purpose of analysis. As a result of such simplified wave data, the assessment for embracing the effects of water depths on wave energy and resources becomes either difficult or inaccurate. In many practical cases, the effects of water depths are simply ignored because the formulas for deep-water waves are frequently employed. This simplification may cause large energy under-estimations for the sea waves in finite water depths. To improve the wave energy assessment for such much-simplified wave data, an approximate method is proposed for approximating the effect of water depth in this research, for which the wave energy period or the calculated peak period can be taken as the reference period for implementing the approximation. The examples for both theoretical and measured spectra show that the proposed method can significantly reduce the errors on wave energy assessment due to the approximations and inclusions of the effects of finite water depths.

  6. Simulation of breaking waves using the high-order spectral method with laboratory experiments: wave-breaking energy dissipation

    Science.gov (United States)

    Seiffert, Betsy R.; Ducrozet, Guillaume

    2017-11-01

    We examine the implementation of a wave-breaking mechanism into a nonlinear potential flow solver. The success of the mechanism will be studied by implementing it into the numerical model HOS-NWT, which is a computationally efficient, open source code that solves for the free surface in a numerical wave tank using the high-order spectral (HOS) method. Once the breaking mechanism is validated, it can be implemented into other nonlinear potential flow models. To solve for wave-breaking, first a wave-breaking onset parameter is identified, and then a method for computing wave-breaking associated energy loss is determined. Wave-breaking onset is calculated using a breaking criteria introduced by Barthelemy et al. (J Fluid Mech https://arxiv.org/pdf/1508.06002.pdf, submitted) and validated with the experiments of Saket et al. (J Fluid Mech 811:642-658, 2017). Wave-breaking energy dissipation is calculated by adding a viscous diffusion term computed using an eddy viscosity parameter introduced by Tian et al. (Phys Fluids 20(6): 066,604, 2008, Phys Fluids 24(3), 2012), which is estimated based on the pre-breaking wave geometry. A set of two-dimensional experiments is conducted to validate the implemented wave breaking mechanism at a large scale. Breaking waves are generated by using traditional methods of evolution of focused waves and modulational instability, as well as irregular breaking waves with a range of primary frequencies, providing a wide range of breaking conditions to validate the solver. Furthermore, adjustments are made to the method of application and coefficient of the viscous diffusion term with negligible difference, supporting the robustness of the eddy viscosity parameter. The model is able to accurately predict surface elevation and corresponding frequency/amplitude spectrum, as well as energy dissipation when compared with the experimental measurements. This suggests the model is capable of calculating wave-breaking onset and energy dissipation

  7. Simulation of breaking waves using the high-order spectral method with laboratory experiments: wave-breaking energy dissipation

    Science.gov (United States)

    Seiffert, Betsy R.; Ducrozet, Guillaume

    2018-01-01

    We examine the implementation of a wave-breaking mechanism into a nonlinear potential flow solver. The success of the mechanism will be studied by implementing it into the numerical model HOS-NWT, which is a computationally efficient, open source code that solves for the free surface in a numerical wave tank using the high-order spectral (HOS) method. Once the breaking mechanism is validated, it can be implemented into other nonlinear potential flow models. To solve for wave-breaking, first a wave-breaking onset parameter is identified, and then a method for computing wave-breaking associated energy loss is determined. Wave-breaking onset is calculated using a breaking criteria introduced by Barthelemy et al. (J Fluid Mech https://arxiv.org/pdf/1508.06002.pdf, submitted) and validated with the experiments of Saket et al. (J Fluid Mech 811:642-658, 2017). Wave-breaking energy dissipation is calculated by adding a viscous diffusion term computed using an eddy viscosity parameter introduced by Tian et al. (Phys Fluids 20(6): 066,604, 2008, Phys Fluids 24(3), 2012), which is estimated based on the pre-breaking wave geometry. A set of two-dimensional experiments is conducted to validate the implemented wave breaking mechanism at a large scale. Breaking waves are generated by using traditional methods of evolution of focused waves and modulational instability, as well as irregular breaking waves with a range of primary frequencies, providing a wide range of breaking conditions to validate the solver. Furthermore, adjustments are made to the method of application and coefficient of the viscous diffusion term with negligible difference, supporting the robustness of the eddy viscosity parameter. The model is able to accurately predict surface elevation and corresponding frequency/amplitude spectrum, as well as energy dissipation when compared with the experimental measurements. This suggests the model is capable of calculating wave-breaking onset and energy dissipation

  8. Energy Properties of Ion Acoustic Waves in Stable and Unstable Plasmas

    DEFF Research Database (Denmark)

    Jensen, Vagn Orla; Lynov, Jens-Peter

    1979-01-01

    acoustic waves that are growing or damped in space the time average of the sum of the potential and the kinetic energy density is independent of position. Energy absorption spectra in particle velocity space are calculated; they are relatively broad and complicated functions. This shows that plasma ions......Energy exchange between potential energy and ion kinetic energy in an ion acoustic wave is considered. In order to investigate the linear Landau damping or growth, the energy is calculated by use of first‐order quantities only so that nonlinear effects are not involved. It is found that for ion...... of all velocities exchange energy with the wave....

  9. Energy and Information Transfer Via Coherent Exciton Wave Packets

    Science.gov (United States)

    Zang, Xiaoning

    Electronic excitons are bound electron-hole states that are generated when light interacts with matter. Such excitations typically entangle with phonons and rapidly decohere; the resulting electronic state dynamics become diffusive as a result. However, if the exciton-phonon coupling can be reduced, it may be possible to construct excitonic wave packets that offer a means of efficiently transmitting information and energy. This thesis is a combined theory/computation investigation to design condensed matter systems which support the requisite coherent transport. Under the idealizing assumption that exciton-phonon entanglement could be completely suppressed, the majority of this thesis focuses on the creation and manipulation of exciton wave packets in quasi-one-dimensional systems. While each site could be a silicon quantum dot, the actual implementation focused on organic molecular assemblies for the sake of computational simplicity, ease of experimental implementation, potential for coherent transport, and promise because of reduced structural uncertainty. A laser design was derived to create exciton wave packets with tunable shape and speed. Quantum interference was then exploited to manipulate these packets to block, pass, and even dissociate excitons based on their energies. These developments allow exciton packets to be considered within the arena of quantum information science. The concept of controllable excitonic wave packets was subsequently extended to consider molecular designs that allow photons with orbital angular momentum to be absorbed to create excitons with a quasi-angular momentum of their own. It was shown that a well-defined measure of topological charge is conserved in such light-matter interactions. Significantly, it was also discovered that such molecules allow photon angular momenta to be combined and later emitted. This amounts to a new way of up/down converting photonic angular momentum without relying on nonlinear optical materials. The

  10. Innovative Design for Sea Dikes and Breakwaters for Wave Energy Conversion

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Stagonas, Dimitris; Müller, Gerald

    2012-01-01

    This paper intends contributing to an economically and environmentally sustainable development of coastal infrastructures by investigating the possibility of combining together breakwaters and Wave Energy Converters (WEC). The latter change the wave energy to electricity, which may serve both...... the rubble mound breakwaters and seawall related activity and the energy demand of small human communities....

  11. A high-resolution assessment of wind and wave energy potentials in the Red Sea

    KAUST Repository

    Langodan, Sabique

    2016-08-24

    This study presents an assessment of the potential for harvesting wind and wave energy from the Red Sea based on an 18-year high-resolution regional atmospheric reanalysis recently generated using the Advanced Weather Research Forecasting model. This model was initialized with ERA-Interim global data and the Red Sea reanalysis was generated using a cyclic three-dimensional variational approach assimilating available data in the region. The wave hindcast was generated using WAVEWATCH III on a 5 km resolution grid, forced by the Red Sea reanalysis surface winds. The wind and wave products were validated against data from buoys, scatterometers and altimeters. Our analysis suggests that the distribution of wind and wave energy in the Red Sea is inhomogeneous and is concentrated in specific areas, characterized by various meteorological conditions including weather fronts, mesoscale vortices, land and sea breezes and mountain jets. A detailed analysis of wind and wave energy variation was performed at three hotspots representing the northern, central and southern parts of the Red Sea. Although there are potential sites for harvesting wind energy from the Red Sea, there are no potential sites for harvesting wave energy because wave energy in the Red Sea is not strong enough for currently available wave energy converters. Wave energy should not be completely ignored, however, at least from the perspective of hybrid wind-wave projects. (C) 2016 Elsevier Ltd. All rights reserved.

  12. Reliability and Maintenance for Offshore Wind Turbines and Wave Energy Devices

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2015-01-01

    Wind turbines are in some countries contributing significantly the production of electricity and wave energy devices have the potential to be developed in a similarway. For both offshore wind turbines and wave energy devices reliability is a key issue since costs to operation and maintenance may...... and wave energy device structural components is discussed together with uncertainty modeling of the main uncertainties related to structural wind turbine components. Two examples are presented related to reliability-based calibration of partial safety factors....

  13. Gravitational wave sirens as a triple probe of dark energy

    Energy Technology Data Exchange (ETDEWEB)

    Linder, Eric V, E-mail: evlinder@lbl.gov [Berkeley Laboratory, University of California, Berkeley, CA 94720 (United States)

    2008-03-15

    Gravitational wave standard sirens have been considered as precision distance indicators of high redshift; however, at high redshift standard sirens or standard candles such as supernovae suffer from lensing noise. We investigate lensing noise as a signal instead and show how measurements of the maximum demagnification (minimum convergence) probe cosmology in a manner highly complementary to the distance itself. Revisiting the original form for minimum convergence we quantify the bias arising from the commonly used approximation. Furthermore, after presenting a new lensing probability function we discuss how the width of the lensed standard siren amplitude distribution also probes growth of structure. Thus standard sirens and candles can serve as triple probes of dark energy, measuring both the cosmic expansion history and growth history.

  14. Gravitational wave sirens as a triple probe of dark energy

    Science.gov (United States)

    Linder, Eric V.

    2008-03-01

    Gravitational wave standard sirens have been considered as precision distance indicators of high redshift; however, at high redshift standard sirens or standard candles such as supernovae suffer from lensing noise. We investigate lensing noise as a signal instead and show how measurements of the maximum demagnification (minimum convergence) probe cosmology in a manner highly complementary to the distance itself. Revisiting the original form for minimum convergence we quantify the bias arising from the commonly used approximation. Furthermore, after presenting a new lensing probability function we discuss how the width of the lensed standard siren amplitude distribution also probes growth of structure. Thus standard sirens and candles can serve as triple probes of dark energy, measuring both the cosmic expansion history and growth history.

  15. Shallow water effects on wave energy converters with hydraulic power take-off system

    Directory of Open Access Journals (Sweden)

    Ashank Sinha

    2016-12-01

    Full Text Available The effect of water depth on the power absorption by a single heaving point absorber wave energy converter, attached to a hydraulic power take-off system, is simulated and analysed. The wave energy flux for changing water depths is presented and the study is carried out at a location in the north-west Portuguese coast, favourable for wave power generation. This analysis is based on a procedure to modify the wave spectrum as the water depth reduces, namely, the TMA spectrum (Transformation spectrum. The present study deals with the effect of water depth on the spectral shape and significant wave heights. The reactive control strategy, which includes an external damping coefficient and a negative spring term, is used to maximize power absorption by the wave energy converter. The presented work can be used for making decisions regarding the best water depth for the installation of point absorber wave energy converters in the Portuguese nearshore.

  16. Structural Loads Analysis for Wave Energy Converters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    van Rij, Jennifer A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-09

    This study explores and verifies the generalized body-modes method for evaluating the structural loads on a wave energy converter (WEC). Historically, WEC design methodologies have focused primarily on accurately evaluating hydrodynamic loads, while methodologies for evaluating structural loads have yet to be fully considered and incorporated into the WEC design process. As wave energy technologies continue to advance, however, it has become increasingly evident that an accurate evaluation of the structural loads will enable an optimized structural design, as well as the potential utilization of composites and flexible materials, and hence reduce WEC costs. Although there are many computational fluid dynamics, structural analyses and fluid-structure-interaction (FSI) codes available, the application of these codes is typically too computationally intensive to be practical in the early stages of the WEC design process. The generalized body-modes method, however, is a reduced order, linearized, frequency-domain FSI approach, performed in conjunction with the linear hydrodynamic analysis, with computation times that could realistically be incorporated into the WEC design process. The objective of this study is to verify the generalized body-modes approach in comparison to high-fidelity FSI simulations to accurately predict structural deflections and stress loads in a WEC. Two verification cases are considered, a free-floating barge and a fixed-bottom column. Details for both the generalized body-modes models and FSI models are first provided. Results for each of the models are then compared and discussed. Finally, based on the verification results obtained, future plans for incorporating the generalized body-modes method into the WEC simulation tool, WEC-Sim, and the overall WEC design process are discussed.

  17. Structural Reliability of Plain Bearings for Wave Energy Converter Applications

    Directory of Open Access Journals (Sweden)

    Simon Ambühl

    2016-02-01

    Full Text Available The levelized cost of energy (LCOE from wave energy converters (WECs needs to be decreased in order to be able to become competitive with other renewable electricity sources. Probabilistic reliability methods can be used to optimize the structure of WECs. Optimization is often performed for critical structural components, like welded details, bolts or bearings. This paper considers reliability studies with a focus on plain bearings available from stock for the Wavestar device, which exists at the prototype level. The Wavestar device is a point absorber WEC. The plan is to mount a new power take-off (PTO system consisting of a discrete displacement cylinder (DDC, which will allow different hydraulic cycles to operate at constant pressure levels. This setup increases the conversion efficiency, as well as decouples the electricity production from the pressure variations within the hydraulic cycle when waves are passing. The new PTO system leads to different load characteristics at the floater itself compared to the actual setup where the turbine/generator is directly coupled to the fluctuating hydraulic pressure within the PTO system. This paper calculates the structural reliability of the different available plain bearings planned to be mounted at the new PTO system based on a probabilistic approach, and the paper gives suggestions for fulfilling the minimal target reliability levels. The considered failure mode in this paper is the brittle fatigue failure of plain bearings. The performed sensitivity analysis shows that parameters defining the initial crack size have a big impact on the resulting reliability of the plain bearing.

  18. Experimental investigation on the hydrodynamic performance of a wave energy converter

    Science.gov (United States)

    Zheng, Xiong-bo; Ma, Yong; Zhang, Liang; Jiang, Jin; Liu, Heng-xu

    2017-06-01

    Wave energy is an important type of marine renewable energy. A wave energy converter (WEC) moored with two floating bodies was developed in the present study. To analyze the dynamic performance of the WEC, an experimental device was designed and tested in a tank. The experiment focused on the factors which impact the motion and energy conversion performance of the WEC. Dynamic performance was evaluated by the relative displacements and velocities of the oscillator and carrier which served as the floating bodies of WEC. Four factors were tested, i.e. wave height, wave period, power take-off (PTO) damping, and mass ratio ( R M) of the oscillator and carrier. Experimental results show that these factors greatly affect the energy conversion performance, especially when the wave period matches R M and PTO damping. According to the results, we conclude that: (a) the maximization of the relative displacements and velocities leads to the maximization of the energy conversion efficiency; (b) the larger the wave height, the higher the energy conversion efficiency will be; (c) the relationships of energy conversion efficiency with wave period, PTO damping, and R M are nonlinear, but the maximum efficiency is obtained when these three factors are optimally matched. Experimental results demonstrated that the energy conversion efficiency reached the peak at 28.62% when the wave height was 120 mm, wave period was 1.0 s, R M was 0.21, and the PTO damping was corresponding to the resistance of 100 Ω.

  19. Interpretation of the mathematical source of the energy-flow of love-wave. Love ha no energy ryuryogen

    Energy Technology Data Exchange (ETDEWEB)

    Tazime, K. (Hokkaido Univ., Sapporo (Japan))

    1990-04-01

    This paper gives a mathematical discussion of the energy flow of wave using the function which represents cylindrical SH wave originating from a linear source as a fundamental solution of two-dimensional inhomogeneous wave equation. The formula representing the energy flow density of cylindrical wave is manipulated by means of this solution and the following results are obtained: first, the source of the cylindrical wave can be converted from a linear one to a planar one; second, the energy flow generated from the source is subject to conditions of all boundary surfaces; third, in virtue of the conservation of energy flow, the inhomogeneous transmitted wave can be generated by total reflection; fourth, the energy flow of love wave is subject to conditions of all boundary planes including the free surface, its source being also able to be converted from a linear one to a planar one; fifth, it is proved that the energy flow of Love wave originating from the source as SH wave is conserved throughout the space in which it propagates. 9 refs., 8 figs.

  20. Potential applications of low-energy shock waves in functional urology.

    Science.gov (United States)

    Wang, Hung-Jen; Cheng, Jai-Hong; Chuang, Yao-Chi

    2017-08-01

    A shock wave, which carries energy and can propagate through a medium, is a type of continuous transmitted sonic wave with a frequency of 16 Hz-20 MHz. It is accompanied by processes involving rapid energy transformations. The energy associated with shock waves has been harnessed and used for various applications in medical science. High-energy extracorporeal shock wave therapy is the most successful application of shock waves, and has been used to disintegrate urolithiasis for 30 years. At lower energy levels, however, shock waves have enhanced expression of vascular endothelial growth factor, endothelial nitric oxide synthase, proliferating cell nuclear antigen, chemoattractant factors and recruitment of progenitor cells; shock waves have also improved tissue regeneration. Low-energy shock wave therapy has been used clinically with musculoskeletal disorders, ischemic cardiovascular disorders and erectile dysfunction, through the mechanisms of neovascularization, anti-inflammation and tissue regeneration. Furthermore, low-energy shock waves have been proposed to temporarily increase tissue permeability and facilitate intravesical drug delivery. The present review article provides information on the basics of shock wave physics, mechanisms of action on the biological system and potential applications in functional urology. © 2017 The Japanese Urological Association.

  1. Cost Optimization of Mooring Solutions for Large Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2018-01-01

    commercial yet, primarily due to the relatively high cost of energy. A considerable amount of the wave energy converters are floating structures, which consequently need mooring systems in order to ensure station keeping. Despite being a well-known concept, mooring in wave energy application has proven......The increasing desire for using renewable energy sources throughout the world has resulted in a considerable amount of research into and development of concepts for wave energy converters. By now, many different concepts exist, but still, the wave energy sector is not at a stage that is considered...... to be expensive and has a high rate of failure. Therefore, there is a need for further improvement, investigation into new concepts and sophistication of design procedures. This study uses four Danish wave energy converters, all considered as large floating structures, to investigate a methodology in order...

  2. Marine renewable energies. When researchers consider the ocean as an energy source. Offshore wind power. The thermal energy of seas, a solar resource to be no longer neglected. Lipid biofuels production by micro-algae; Energies Renouvelables marines. Quand les chercheurs voient l'ocean comme source d'energie. L'eolien offshore. L'energie thermique des mers, ressource solaire a ne plus negliger. La production de biocarburant lipidiques par des microalgues

    Energy Technology Data Exchange (ETDEWEB)

    Ruer, J. [Saipen SA, 78 - Saint Quentin en Yvelines (France); Gauthier, M. [Ifremer, 92 - Issy les Moulineaux (France); Zaharia, R. [CNES, 75 - Paris (France); Cadoret, J.P. [IFREMER, Lab. de Physiologie et Biologie des Algues, 44 - Nantes (France)

    2008-03-15

    In the present day context of search for renewable energy sources, it is surprising that the oceans energy, potentially enormous, is poorly taken into consideration with respect to the other renewable energy sources, while France has been a pioneer in this domain with the construction of the Rance tidal power plant in the 1960's, and still in operation today. However, the scientific community, and in particular the IFREMER institute in France, is developing R and D programs on marine energy technologies. On the other hand, the development of wind power is growing up rapidly with a worldwide installed capacity exceeding today 94000 MW and supplying 3% of the electricity consumed in Europe. The development of offshore wind farms represents today 1122 MW and should grow up very fast in the coming years. The ocean is also a huge reservoir of thermal energy which can be exploited to generate electricity and desalinated water. Finally, the cultivation of micro-algae for the enhanced production of lipids may be a more ecological alternative to the terrestrial production of biofuels, strongly criticized today for its long term environmental impacts. (J.S.)

  3. Benchmark Modeling of the Near-Field and Far-Field Wave Effects of Wave Energy Arrays

    Energy Technology Data Exchange (ETDEWEB)

    Rhinefrank, Kenneth E; Haller, Merrick C; Ozkan-Haller, H Tuba

    2013-01-26

    This project is an industry-led partnership between Columbia Power Technologies and Oregon State University that will perform benchmark laboratory experiments and numerical modeling of the near-field and far-field impacts of wave scattering from an array of wave energy devices. These benchmark experimental observations will help to fill a gaping hole in our present knowledge of the near-field effects of multiple, floating wave energy converters and are a critical requirement for estimating the potential far-field environmental effects of wave energy arrays. The experiments will be performed at the Hinsdale Wave Research Laboratory (Oregon State University) and will utilize an array of newly developed Buoys' that are realistic, lab-scale floating power converters. The array of Buoys will be subjected to realistic, directional wave forcing (1:33 scale) that will approximate the expected conditions (waves and water depths) to be found off the Central Oregon Coast. Experimental observations will include comprehensive in-situ wave and current measurements as well as a suite of novel optical measurements. These new optical capabilities will include imaging of the 3D wave scattering using a binocular stereo camera system, as well as 3D device motion tracking using a newly acquired LED system. These observing systems will capture the 3D motion history of individual Buoys as well as resolve the 3D scattered wave field; thus resolving the constructive and destructive wave interference patterns produced by the array at high resolution. These data combined with the device motion tracking will provide necessary information for array design in order to balance array performance with the mitigation of far-field impacts. As a benchmark data set, these data will be an important resource for testing of models for wave/buoy interactions, buoy performance, and far-field effects on wave and current patterns due to the presence of arrays. Under the proposed project we will initiate

  4. Infragravity-wave dynamics in shallow water : energy dissipation and role in sand suspension and transport

    NARCIS (Netherlands)

    de Bakker, A.T.M.|info:eu-repo/dai/nl/371573734

    2016-01-01

    Infragravity waves (20-200 s) receive their energy from sea-swell waves (2-20 s), and are thought to be important to beach erosion during storms, when they can reach up to several meters in height. Numerous studies have observed that on sandy beaches infragravity waves can lose a large part of their

  5. Energy loss and set-up due to breaking random waves

    NARCIS (Netherlands)

    Battjes, J.A.; Janssen, J.P.F.M.

    1978-01-01

    A description is given of a model developed for the prediction of the dissipation of energy in random waves breaking on a beach. The dissipation rate per breaking wave is estimated from that in a bore of corresponding height, while the probability of occurrence of breaking waves is estimated on the

  6. Energy in the Dominican Republic. A few historical considerations of the problems and integration of renewable energies; L’énergie en République Dominicaine. Quelques considérations historiques du problème et de l’impulsion des énergies renouvelables.

    Energy Technology Data Exchange (ETDEWEB)

    Priam, Judith

    2015-01-15

    Energy production on islands is based, as on continents, on fossil fuels. In the Dominican Republic, the production has been insufficient, a recognized fact since 1897. In 1998, the opening to privatization of energy services was impelled by the Comisión para la Reforma de la Empresa Pública (CREP). Then the promulgation of the Ley General de Electricidad in July 2001 by decree #125 is a first step for renewable energy integration in the electric system. We present a historical approach to the energy problem using documents of 1897, 1946, 1989 and 2001(point 1). Then we present the components of energy production in the Dominican Republic by 2000 (point 2). The demand reached for that year 2000 MW, with only 1600 MW installed capacity. Some elements of the first institutional and legislative impulses to integrate renewable energy in the system are included (point 3). Finally, we underline the last 2013 crisis and show how only fossil energy allows to respond rapidly (point 4). In fact, renewable energies require a long term for planning and execution.

  7. Controlling Energy Radiations of Electromagnetic Waves via Frequency Coding Metamaterials.

    Science.gov (United States)

    Wu, Haotian; Liu, Shuo; Wan, Xiang; Zhang, Lei; Wang, Dan; Li, Lianlin; Cui, Tie Jun

    2017-09-01

    Metamaterials are artificial structures composed of subwavelength unit cells to control electromagnetic (EM) waves. The spatial coding representation of metamaterial has the ability to describe the material in a digital way. The spatial coding metamaterials are typically constructed by unit cells that have similar shapes with fixed functionality. Here, the concept of frequency coding metamaterial is proposed, which achieves different controls of EM energy radiations with a fixed spatial coding pattern when the frequency changes. In this case, not only different phase responses of the unit cells are considered, but also different phase sensitivities are also required. Due to different frequency sensitivities of unit cells, two units with the same phase response at the initial frequency may have different phase responses at higher frequency. To describe the frequency coding property of unit cell, digitalized frequency sensitivity is proposed, in which the units are encoded with digits "0" and "1" to represent the low and high phase sensitivities, respectively. By this merit, two degrees of freedom, spatial coding and frequency coding, are obtained to control the EM energy radiations by a new class of frequency-spatial coding metamaterials. The above concepts and physical phenomena are confirmed by numerical simulations and experiments.

  8. Nonlinear Gravitational Waves as Dark Energy in Warped Spacetimes

    Directory of Open Access Journals (Sweden)

    Reinoud Jan Slagter

    2017-02-01

    Full Text Available We find an azimuthal-angle dependent approximate wave like solution to second order on a warped five-dimensional manifold with a self-gravitating U(1 scalar gauge field (cosmic string on the brane using the multiple-scale method. The spectrum of the several orders of approximation show maxima of the energy distribution dependent on the azimuthal-angle and the winding numbers of the subsequent orders of the scalar field. This breakup of the quantized flux quanta does not lead to instability of the asymptotic wavelike solution due to the suppression of the n-dependency in the energy momentum tensor components by the warp factor. This effect is triggered by the contribution of the five dimensional Weyl tensor on the brane. This contribution can be understood as dark energy and can trigger the self-acceleration of the universe without the need of a cosmological constant. There is a striking relation between the symmetry breaking of the Higgs field described by the winding number and the SO(2 breaking of the axially symmetric configuration into a discrete subgroup of rotations of about 180 ∘ . The discrete sequence of non-axially symmetric deviations, cancelled by the emission of gravitational waves in order to restore the SO(2 symmetry, triggers the pressure T z z for discrete values of the azimuthal-angle. There could be a possible relation between the recently discovered angle-preferences of polarization axes of quasars on large scales and our theoretical predicted angle-dependency and this could be evidence for the existence of cosmic strings. Careful comparison of this spectrum of extremal values of the first and second order φ-dependency and the distribution of the alignment of the quasar polarizations is necessary. This can be accomplished when more observational data become available. It turns out that, for late time, the vacuum 5D spacetime is conformally invariant if the warp factor fulfils the equation of a vibrating

  9. Estimation and Monitoring of Wind/Wave energy potential in the Eastern Mediterranean Sea

    Science.gov (United States)

    Zodiatis, George; Galanis, George; Galanis, George; Emmanouil, George; Emmanouil, George; Hayes, Dan; Nikolaidis, Andreas; Georgiou, Georgios; Kalogeri, Christina; Kallos, George

    2013-04-01

    Τhe adaptation and use of innovative methodologies for the exploitation of renewable energy marine resources is one of the main issues today for the environmental science community. Within this framework, the exploitation of wind and wave energy potential for coastal and island states seems to be one of the promising solutions and highly interesting from research and technological point of view. In this work, the activities of two projects focusing on the study of wind/wave energy over the area of Eastern Mediterranean Sea are presented. The "Integrated High Resolution System for Monitoring and Quantifying the Wave Energy Potential in the EEZ of Cyprus" (Ewave project) focuses on the estimation, monitoring and forecasting of the wave energy potential over the Levantine Basin with special emphasis to the Exclusive Economical Zone of Cyprus, while the "Development and application of new mathematical and physical models for Monitoring the wind and Sea wave Energy Potential" (MOSEP project) is a platform for developing new mathematical algorithms for the estimation of the wave energy over the Aegean Sea. In both projects, high resolution digital atlases of sea wave/wind climatological characteristics and the distribution of the wind and wave energy potential are developed for the coastal and offshore areas of the East Mediterranean sea . Moreover, new models for the prediction and quantification of wave energy in short and long forecast horizons are proposed. Statistical results concerning the probability density functions of the wind speed, the significant wave height, as well as the energy potential will be presented for selected sea areas in the Eastern Mediterranean Sea, while test case studies in certain regions favor to wind/wave renewable energy will be discussed.

  10. Optical theorem for electromagnetic field scattering by dielectric structures and energy emission from the evanescent wave.

    Science.gov (United States)

    Gulyaev, Yu V; Barabanenkov, Yu N; Barabanenkov, M Yu; Nikitov, S A

    2005-08-01

    We present an optical theorem for evanescent (near field) electromagnetic wave scattering by a dielectric structure. The derivation is based on the formalism of angular spectrum wave amplitudes and block scattering matrix. The optical theorem shows that an energy flux is emitted in the direction of the evanescent wave decay upon scattering. The energy emission effect from an evanescent wave is illustrated in two examples of evanescent wave scattering, first, by the electrical dipole and, second, one-dimensional grating with line-like rulings. Within the latter example, we show that an emitted energy flux upon evanescent wave scattering can travel through a dielectric structure even if the structure has a forbidden gap in the transmission spectrum of incident propagating waves.

  11. Numerical Modeling of Fluid Structure Interactions of a Floating Wave Energy Extraction Device

    Science.gov (United States)

    Lee, J.; Kang, S.

    2014-12-01

    In recent years there has been increased attention towards developing the strategies for harnessing hydrokinetic and wave energy from the ocean. There exists several hydrokinetic energy devices designed to extract energy from the ocean current but few wave energy devices are available. The moored floating cylinder-like structure that has been recently developed in South Korea is one of such devices. We carry out numerical simulation of the three-dimensional interactions of a floating cylinder and incoming waves using the level-set curvilinear immersed boundary method of Kang and Sotiropoulos (2012) to improve the understanding the wave energy extraction mechanisms of that device. The results demonstrate the potential of our numerical model as a powerful engineering tool for predicting complex wave-structure interaction phenomena associated with energy extraction devices.

  12. Inclusion of Structural Flexibility in Design Load Analysis for Wave Energy Converters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); van Rij, Jennifer A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tom, Nathan M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-14

    Hydroelastic interactions, caused by ocean wave loading on wave energy devices with deformable structures, are studied in the time domain. A midfidelity, hybrid modeling approach of rigid-body and flexible-body dynamics is developed and implemented in an open-source simulation tool for wave energy converters (WEC-Sim) to simulate the dynamic responses of wave energy converter component structural deformations under wave loading. A generalized coordinate system, including degrees of freedom associated with rigid bodies, structural modes, and constraints connecting multiple bodies, is utilized. A simplified method of calculating stress loads and sectional bending moments is implemented, with the purpose of sizing and designing wave energy converters. Results calculated using the method presented are verified with those of high-fidelity fluid-structure interaction simulations, as well as low-fidelity, frequency-domain, boundary element method analysis.

  13. The hydrodynamics of air-filled bags for wave energy conversion

    DEFF Research Database (Denmark)

    Greaves, Deborah; Hann, Martyn; Kurniawan, Adi

    The search for an economic means to harness energy from ocean waves continues. This paper aims to summarise the findings from our recent studies of novel wave energy devices in which flexible, deformable structures are used in place of conventional rigid structures. The devices utilise a flexible...... air-filled bag to capture energy from the waves and three different configurations are compared. In each of the three device configurations, expansion and contraction of the bag in waves create a reciprocating air flow via a turbine between the bag and another volume. The bags are all in the form...

  14. Wave-to-wire Modelling of Wave Energy Converters : Critical Assessment, Developments and Applicability for Economical Optimisation

    DEFF Research Database (Denmark)

    Ferri, Francesco

    untapped, renewable energy resource that has the potential to contribute significantly to the future energy mix, especially in an environmental friendly future scenario. What is bounding the sector to roll off into the market is the cost of the produced energy: too high if compared with other renewable......The idea to use the motion of a wavy sea surface to produce electricity was investigate in the seventies, in a time when the earliest wave energy converters were conceived and developed. But nowadays still none of the patented devices reached a commercial stage. Wave energy is a large, mostly...... energy sources. Generally speaking, the devices have a low efficiency and a high structural cost. The aim of the thesis is to push the research toward a cost minimisation algorithm, based on numerical simulation, which account for both efficiency and structural cost of the device. In order to achieve...

  15. Research into the further development of the LIMPET shoreline wave energy plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This report summarises the findings of a project focussing on technical issues associated with the design of the LIMPET shoreline oscillating water column (OWC) wave energy plant. Fifteen tasks are listed as the objectives of the project which was carried out to broaden the knowledge of the wave environment and the construction and operation of a wave energy plant. The experience gained in LIMPET instrumentation, control systems, and grid integration issues are discussed.

  16. Hydraulic evaluation of Joltech’s GyroPTO for wave energy applications

    DEFF Research Database (Denmark)

    Kramer, Morten Mejlhede; Pecher, Arthur Francois Serge; Guaraldi, Irene

    The work presented in this report was completed under the support from the Danish Energy Technological Development and Demonstration Program (EUDP), project no. 64014-0129 “Gyro electric energy converter unit for wave energy”. Testing took place in the wave basin at the Department of Civil...

  17. Absolute instability from linear conversion of counter-propagating positive and negative energy waves

    Energy Technology Data Exchange (ETDEWEB)

    Kaufman, A.N.; Brizard, A.J.; Morehead, J.J. [Lawrence Berkeley National Lab., CA (United States); Tracy, E.R. [College of William and Mary, Williamsburg, VA (United States)

    1997-12-31

    The resonant interaction of a negative-energy wave with a positive-energy wave gives rise to a linear instability. Whereas a single crossing of rays in a nonuniform medium leads to a convectively saturated instability, we show that a double crossing can yield an absolute instability.

  18. Assessment of Wave Energy in the South China Sea Based on GIS Technology

    Directory of Open Access Journals (Sweden)

    Gang Lin

    2017-01-01

    Full Text Available China is now the world’s largest user of coal and also has the highest greenhouse gas emissions associated with the mining and use of coal. Under today’s enormous pressures of the growing shortage of conventional energy sources and the need for emission reductions, the search for clean energy is the most effective strategy to address the energy crisis and global warming. This study utilized satellite remote sensing technology, geographic information system (GIS technology, and simulated wave data for the South China Sea. The characteristic features of the wave energy were obtained by analysis through the wave resource assessment formula and the results were stored in a GIS database. Software for the evaluation of wave energy in the South China Sea was written. The results should provide accurate, efficient references for wave energy researchers and decision-makers. Based on a 24-year WW3 model simulation wave data and GIS technology, this study presented the characteristic of the wave energy in the SCS; results demonstrated that the SCS has the feasibility and viability for wave energy farming.

  19. Linearized potential flow analysis of a 40 chamber, oscillating water column wave energy device

    DEFF Research Database (Denmark)

    Bingham, Harry B.; Read, Robert

    This abstract presents an analysis of an attenuator-type Wave Energy Converter (WEC) with 40 Os- cillating Water Column (OWC) chambers for the extraction of wave energy. Linearized potential flow calculations are made in the frequency-domain using WAMIT [8]. An equivalent linearized damping...

  20. Colloquium: Multimessenger astronomy with gravitational waves and high-energy neutrinos

    NARCIS (Netherlands)

    Ando, S.; Baret, B.; Bartos, I.; Bouhou, B.; Chassande-Mottin, E.; Corsi, A.; Di Palma, I.; Dietz, A.; Donzaud, C.; Eichler, D.; Finley, C.; Guetta, D.; Halzen, F.; Jones, G.; Kandhasamy, S.; Kotake, K.; Kouchner, A.; Mandic, V.; Márka, S.; Márka, Z.; Moscoso, L.; Papa, M.A.; Piran, T.; Pradier, T.; Romero, G.E.; Sutton, P.; Thrane, E.; van Elewyck, V.; Waxman, E.

    2013-01-01

    Many of the astrophysical sources and violent phenomena observed in our Universe are potential emitters of gravitational waves and high-energy cosmic radiation, including photons, hadrons, and presumably also neutrinos. Both gravitational waves (GW) and high-energy neutrinos (HEN) are cosmic

  1. Proceedings of the business and investment forum 'renewable energy in Africa'. A Thermie and UNESCO action; Recueil des interventions du forum d'affaires 'energies renouvelables en Afrique'. Une action du programme Thermie et de l'Unesco

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    One of the objectives of THERMIE (which is the demonstration component of the Research and Technological Development JOULE-THERMIE programme of the European community in non-nuclear energy technologies) is to promote co-operation in the field of renewable energy technologies between the European Union and African countries. The World Solar Programme 1996-2005 adopted during the Harare summit (September 96) organised by UNESCO in co-operation with the European Commission, recommends a wider use of renewable energy sources, through the implementation of national high priority projects. This Business and investment Forum is an integral part of the follow-up to the World Solar Summit. Following QUITO in September 98 and HARARE in March 99, similar events will be organised in other Regions, with an ADEME co-ordination. The Forum was specifically targeted at decision and policy-makers, local authorities, investors and international co-operation agencies, industrialists, institutional representatives and programme managers working in the field of Renewable Energy. One of the main goals of this Forum is to promote investments and financing opportunities for projects using efficient renewable energy technologies, for a sustainable development in Africa. (author)

  2. Report of the working group on the rationalization and simplification of the procedures applicable to power producers that use renewable energy sources; Rapport du groupe de travail sur la rationalisation et la simplification des procedures applicables aux producteurs d'electricite a partir de sources d'energie renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    After a recall of the general context of development of renewable energy sources in France, this report draws up an inventory of the procedures which concern the facilities that use renewable energy sources. Then, it examines the different criticisms that have been expressed about these procedures and about their modalities of enforcement. This analysis leads to a set of proposals which aims at restoring the expected legibility of the procedures with respect the operators of these facilities and at ensuring the necessary transparency and exemplariness with respect to the environment. (J.S.)

  3. Introduction Of Wavestar Wave Energy Converters At The Danish Offshore Wind Power Plant Horns Rev 2

    DEFF Research Database (Denmark)

    Marquis, L.; Kramer, Morten; Kringelum, J.

    Wavestar, DONG Energy, Aalborg University and Energinet.dk are working together to evaluate in practice the idea of combining the energy production from wind and wave technologies. For that purpose, Wavestar is planning the installation of a 600kW Wavestar Wave Energy Converter (WEC) which...... is to be connected to a wind turbine at the DONG Energy owned wind power plant Horns Rev 2 placed off the western coast of Denmark. The plant delivers its energy production to a transformer station owned by Energinet.dk. Energinet.dk has the obligation to ensure that power is transmitted to the Danish consumers....... If Executed the project will be the first one in the world where wind and wave power are combined at full scale. The goal of the project is to evaluate the opportunities of combining wind and wave energy production on a commercial scale and to demonstrate the reduction of energy fluctuations...

  4. Experimental study on the wave loads on a rotor of the WEPTOS Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    Experimental tests have been performed to investigate the wave load on the rotor in design wave conditions. These wave loads should give an indication of the required structural strength around the rotors as well as for other equipment such as the bearings. During the lab tests, the wave loads have...... been measured for the following configurations: • Head and beam seas (wave coming from the front and the side) • For three different submergence levels • For three different dispositions of the rotor (free to rotate, and fixed at 50° and 90°) Based on this results, an estimation of the maximum wave...... loads has been made on the maximum wave loads at the DanWEC test site....

  5. The renewable energies and raw materials in France. Situation and perspectives of development within the framework of the fight against the climatic change; Les energies et matieres premieres renouvelable en France. Situation et perspectives de developpement dans le cadre de la lutte contre le changement climatique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The ADEME proposes to evaluate the situation of the renewable energies utilization in France. The three types of utilizations are analyzed: heat, electric power and fuels. The renewable products in substitution to the petrochemistry are also considered. Two chapters are devoted to the perspectives development and the international context is discussed. (A.L.B.)

  6. Report on the french objectives of electricity consumption, produced from renewable energies sources and on the analysis of their realization; Rapport sur les objectifs francais de consommation d'electricite produite a partir de sources d'energie renouvelable et sur l'analyse de leur realisation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This report presents the french objectives of electricity, from renewable energies sources, internal consumption for the next ten years, as the analysis of their realization taking into account the climatic factors likely to change the realization of these objectives. It also discusses the adequacy of the actions to the national engagement in matter of climatic change. (A.L.B.)

  7. Spectral energy transfer of atmospheric gravity waves through sum and difference nonlinear interactions

    Directory of Open Access Journals (Sweden)

    K. M. Huang

    2012-02-01

    Full Text Available Nonlinear interactions of gravity waves are studied with a two-dimensional, fully nonlinear model. The energy exchanges among resonant and near-resonant triads are examined in order to understand the spectral energy transfer through interactions. The results show that in both resonant and near-resonant interactions, the energy exchange between two high frequency waves is strong, but the energy transfer from large to small vertical scale waves is rather weak. This suggests that the energy cascade toward large vertical wavenumbers through nonlinear interaction is inefficient, which is different from the rapid turbulence cascade. Because of considerable energy exchange, nonlinear interactions can effectively spread high frequency spectrum, and play a significant role in limiting wave amplitude growth and transferring energy into higher altitudes. In resonant interaction, the interacting waves obey the resonant matching conditions, and resonant excitation is reversible, while near-resonant excitation is not so. Although near-resonant interaction shows the complexity of match relation, numerical experiments show an interesting result that when sum and difference near-resonant interactions occur between high and low frequency waves, the wave vectors tend to approximately match in horizontal direction, and the frequency of the excited waves is also close to the matching value.

  8. The synoptic setting and possible energy sources for mesoscale wave disturbances

    Science.gov (United States)

    Uccellini, Louis W.; Koch, Steven E.

    1987-01-01

    Published data on 13 cases of mesoscale wave disturbances and their environment were examined to isolate common features for these cases and to determine possible energy sources for the waves. These events are characterized by either a singular wave of depression or wave packets with periods of 1-4 h, horizontal wavelengths of 50-500 km, and surface-pressure perturbation amplitudes of 0.2-7.0 mb. These wave events are shown to be associated with a distinct synoptic pattern (including the existence of a strong inversion in the lower troposphere and the propagation of a jet streak toward a ridge axis in the upper troposphere) while displaying little correlation with the presence of convective storm cells. The observed development of the waves is consistent with the hypothesis that the energy source needed to initiate and sustain the wave disturbances may be related to a geostrophic adjustment process associated with upper-tropospheric jet streaks.

  9. Group bound long waves as a source of infragravity energy in the surf zone

    Science.gov (United States)

    Masselink, Gerhard

    1995-11-01

    Measurements of water surface elevation and cross-shore currents were made under moderate-energy conditions ( Hrms = 1.1 m and Tz = 7.5 s) on a low-gradient macrotidal beach in central Queensland, Australia. The infragravity signal (BLW) that lags approximately 5 s behind the wind wave envelope. The BLW decouples from the wind wave groups as the incident waves break. The released BLW then travels onshore through the surf zone as a free wave and reflects some distance seaward (5 m) of the shoreline. The superposition of the released BLW and the reflected leaky wave results in standing wave motion in the inner surf zone. Coherence-spectra suggest that about 40% of the incoming infragravity energy is forced by the wind wave envelope.

  10. Building a Pre-Competitive Knowledge Base to Support Australia's Wave Energy Industry

    Science.gov (United States)

    Hoeke, R. K.; Hemer, M. A.; Symonds, G.; Rosebrock, U.; Kenyon, R.; Zieger, S.; Durrant, T.; Contardo, S.; O'Grady, J.; Mcinnes, K. L.

    2016-02-01

    A pre-competitive, query-able and openly available spatio-temporal atlas of Australia's wind-wave energy resource and marine management uses is being delivered. To provide the best representation of wave energy resource information, accounting for both spatial and temporal characteristics of the resource, a 34+yr numerical hindcast of wave conditions in the Australian region has been developed. Considerable in situ and remotely sensed data have been collected to support calibration and validation of the hindcast, resulting in a high-quality characterisation of the available wave resource in the Australian domain. Planning for wave energy projects is also subject to other spatial constraints. Spatial information on alternative uses of the marine domain including, for example, fisheries and aquaculture, oil and gas, shipping, navigation and ports, marine parks and reserves, sub-sea cables and infrastructure, shipwrecks and sites of cultural significance, have been compiled to complement the spatial characterisation of resource and support spatial planning of future wave energy projects. Both resource and spatial constraint information are being disseminated via a state-of-the-art portal, designed to meet the needs of all industry stakeholders. Another aspect currently impeding the industry in Australia is the limited evidence-base of impacts of wave energy extraction on adjacent marine and coastal environments. To build this evidence base, a network of in situ wave measurement devices have been deployed surrounding the 3 wave energy converters of Carnegie Wave Energy Limited's Perth Wave Energy Project. This data is being used to calibrate and validate numerical simulations of the project site. Early stage results will be presented.

  11. Experimental investigation of change of energy of infragavity waves in dependence on spectral characteristics of an irregular wind waves in coastal zone

    Science.gov (United States)

    Saprykina, Yana; Divinskii, Boris

    2013-04-01

    An infragravity waves are long waves with periods of 20 - 300 s. Most essential influence of infragarvity waves on dynamic processes is in a coastal zone, where its energy can exceed the energy of wind waves. From practical point of view, the infragravity waves are important, firstly, due to their influence on sand transport processes in a coastal zone. For example, interacting with group structure of wind waves the infragravity waves can define position of underwater bars on sandy coast. Secondly, they are responsible on formation of long waves in harbors. Main source of infragravity waves is wave group structure defined by sub-nonlinear interactions of wind waves (Longuet-Higgins, Stewart, 1962). These infragravity waves are bound with groups of wind waves and propagate with wave group velocity. Another type of infragravity waves are formed in a surf zone as a result of migration a wave breaking point (Symonds, et al., 1982). What from described above mechanisms of formation of infragravity waves prevails, till now it is unknown. It is also unknown how energy of infragravity waves depends on energy of input wind waves and how it changes during nonlinear wave transformation in coastal zone. In our work on the basis of the analysis of data of field experiment and numerical simulation a contribution of infragravity waves in total wave energy in depending on integral characteristics of an irregular wave field in the conditions of a real bathymetry was investigated. For analysis the data of field experiment "Shkorpilovtsy-2007" (Black sea) and data of numerical modeling of Boussinesq type equation with extended dispersion characteristics (Madsen et al., 1997) were used. It was revealed that infragravity waves in a coastal zone are defined mainly by local group structure of waves, which permanently changes due to nonlinearity, shoaling and breaking processes. Free infragravity waves appearing after wave breaking exist together with bound infragravity waves. There are

  12. Simulation and Experimental Study in the Process of Wave Energy Conversion

    Directory of Open Access Journals (Sweden)

    Zhang Wei

    2016-10-01

    Full Text Available This article introduces the operating principle of the wave energy device and makes AMEsim simulated analysis in the influence of the amplitude and period of the wave on the output efficient. By using the result of the simulation to optimize design, the article puts forwards a kind of suitable control technology which based on the disclosed amplitude and period of the wave to control the check valve, invoking the motor in different levels of efficiency. This kind of technology aims to solve the problem which includes low efficiency and high start wave of the wave energy device. The result is verified by the physical experiment, which lays the foundation for the implementation of marine engineering. The established methods of simulation model and analysis results are expected to be useful to designing and manufacturing of wave energy converter.

  13. Fatigue Analysis of a Wave Energy Converter Taking into Account Different Control Strategies

    DEFF Research Database (Denmark)

    Zurkinden, Andrew Stephen; Lambertsen, Søren Heide; Damkilde, Lars

    2013-01-01

    Point absorber wave energy converters (WEC) are subjected to random wave loads. In addition, the power production of a WEC and the motions are considerably influenced by the applied control mechanism. For small waves, with a wave period close to the natural period of the oscillating system......, the power output may be controlled passively by means of a constant damping coefficient. The energy is extracted proportionally to the square of the body′s velocity. If the wave period is away from the natural period, reactive power may be applied in order to enlarge the resonance bandwidth. Recent studies...... favorable regarding the trade off between the fatigue damage and power production of the wave energy device....

  14. Innovative Seawalls and Rubble Mound Breakwater Design for Wave Energy Conversion

    DEFF Research Database (Denmark)

    Vicinanza, Diego; Contestabile, P.; Ferrante, V.

    2012-01-01

    The development of contemporary coastal infrastructure is nowadays dictated by the need for economical and environmental sustainability, which can however be provided by the combination of breakwaters and Wave Energy Converters (WEC). The latter convert wave energy to electricity, whilst previous...... research has shown that they can also enhance the protective roll of coastal structures such as rubble mound breakwaters and vertical seawalls. Such WECs can in theory provide sufficient energy to partly cover the needs of small communities and although retrofitting solutions for vertical seawalls have...... that such a structure will convert wave energy to electricity and in the same time it will reduce run-up and overtopping....

  15. The observations of high energy electrons and associated waves by DSP satellites during substorm

    Energy Technology Data Exchange (ETDEWEB)

    Cao Jinbin [Key Laboratory of Space Weather, Center for Space Science and Applied Research, Chinese Academy of Sciences, Beijing, 100080 (China); Yang Junying; Yan Chunxiao [Key Laboratory of Space Weather, Center for Space Science and Applied Research, Chinese Academy of Sciences, Beijing, 100080 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100039 (China); Li Liyuan [Key Laboratory of Space Weather, Center for Space Science and Applied Research, Chinese Academy of Sciences, Beijing, 100080 (China)

    2007-04-15

    Double Star Program (DSP) is a CNSA-ESA cooperation mission. DSP consists of two satellites: Equatorial satellite (TC-1) and Polar satellite (TC-2). This paper presents important observations of long duration loss of high energetic electrons and relevant waves in the recovery phase of substorm, that are made by LFEW and HEED of the polar satellite of DSP (TC-2). The HEED of TC-2 observed a loss event of high energetic electrons which lasted about 4 minute. At the same time, the LFEW of TC-2 observed a wave burst. The wave burst began 1 minute earlier than the loss event of energetic electrons. The frequency of waves ranges form 600 Hz to over 10 kHz. The analyses of wave characteristics indicate that the wave was whistler-mode. Thus it is very possible that the loss of high energy electrons was caused by wave activities through wave-particle interactions.

  16. Application of the Time-Dependent Mild-Slope Equations for the Simulation of Wake Effects in the Lee of a Farm of Wave Dragon Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, Charlotte; Troch, Peter; Visch, Kenneth De

    2010-01-01

    Time-dependent mild-slope equations have been extensively used to compute wave transformations near coastal and offshore structures for more than 20 years. Recently the wave absorption characteristics of a Wave Energy Converter (abbreviated as WEC) of the overtopping type have been implemented...... in a time-dependent mild-slope equation model by using numerical sponge layers. In this paper the developed WEC implementation is applied to a single Wave Dragon WEC and multiple Wave Dragon WECs. The Wave Dragon WEC is a floating offshore converter of the overtopping type. Two wave reflectors focus...... the incident wave power towards a ramp. The focussed waves run up the ramp and overtop in a water reservoir above mean sea level. The obtained potential energy is converted into electricity when the stored water drains back to the sea through hydro turbines. The wave reflectors and the main body (ramp...

  17. Estimation of numerical uncertainty in computational fluid dynamics simulations of a passively controlled wave energy converter

    DEFF Research Database (Denmark)

    Wang, Weizhi; Wu, Minghao; Palm, Johannes

    2018-01-01

    The wave loads and the resulting motions of floating wave energy converters are traditionally computed using linear radiation–diffraction methods. Yet for certain cases such as survival conditions, phase control and wave energy converters operating in the resonance region, more complete...... mathematical models such as computational fluid dynamics are preferred and over the last 5 years, computational fluid dynamics has become more frequently used in the wave energy field. However, rigorous estimation of numerical errors, convergence rates and uncertainties associated with computational fluid...... dynamics simulations have largely been overlooked in the wave energy sector. In this article, we apply formal verification and validation techniques to computational fluid dynamics simulations of a passively controlled point absorber. The phase control causes the motion response to be highly nonlinear even...

  18. Hydrodynamic Characteristics and Strength Analysis of a Novel Dot-matrix Oscillating Wave Energy Converter

    Science.gov (United States)

    Shao, Meng; Xiao, Chengsi; Sun, Jinwei; Shao, Zhuxiao; Zheng, Qiuhong

    2017-12-01

    The paper analyzes hydrodynamic characteristics and the strength of a novel dot-matrix oscillating wave energy converter, which is in accordance with nowadays’ research tendency: high power, high efficiency, high reliability and low cost. Based on three-dimensional potential flow theory, the paper establishes motion control equations of the wave energy converter unit and calculates wave loads and motions. On this basis, a three-dimensional finite element model of the device is built to check its strength. Through the analysis, it can be confirmed that the WEC is feasible and the research results could be a reference for wave energy’s exploration and utilization.

  19. Structural Modeling and Analysis of a Wave Energy Converter Applying Dynamical Substructuring Method

    DEFF Research Database (Denmark)

    Zurkinden, Andrew Stephen; Damkilde, Lars; Gao, Zhen

    2013-01-01

    This paper deals with structural modeling and analysis of a wave energy converter. The device, called Wavestar, is a bottom fixed structure, located in a shallow water environment at the Danish Northwest coast. The analysis is concentrated on a single float and its structural arm which connects...... the WEC to a jackup structure. The wave energy converter is characterized by having an operational and survival mode. The survival mode drastically reduces the exposure to waves and therfore to the wave loads. Structural response analysis of the Wavestar arm is carried out in this study. Due...

  20. Hydrodynamic analysis of oscillating water column wave energy devices

    DEFF Research Database (Denmark)

    Bingham, Harry B.; Ducasse, Damien; Nielsen, Kim

    2015-01-01

    for wave-body interactions, 2014, http://​www.​wamit.​com) is used for the basic wave-structure interaction analysis. The damping applied to each chamber by the power take off is modeled in the experiment by forcing the air through a hole with an area of about 1 % of the chamber water surface area...

  1. Local energy decay for wave equation in the absence of resonance at zero energy in 3D

    OpenAIRE

    Georgiev, Vladimir; Tarulli, Mirko

    2011-01-01

    In this paper we study spectral properties associated to Schrodinger operator with potential that is an exponential decaying function. As applications we prove local energy decay for solutions to the perturbed wave equation and lack of resonances for the NLS.

  2. Marine Planning for Potential Wave Energy Facility Placement Amongst a Crowded Sea of Existing Resource Uses

    Science.gov (United States)

    Feist, B. E.; Fuller, E.; Plummer, M. L.

    2016-12-01

    Conversion to renewable energy sources is a logical response to increasing pressure to reduce greenhouse gas emissions. Ocean wave energy is the least developed renewable energy source, despite having the highest energy per unit area. While many hurdles remain in developing wave energy, assessing potential conflicts and evaluating tradeoffs with existing uses is essential. Marine planning encompasses a broad array of activities that take place in and affect large marine ecosystems, making it an ideal tool for evaluating wave energy resource use conflicts. In this study, we focus on the potential conflicts between wave energy conversion (WEC) facilities and existing marine uses in the context of marine planning, within the California Current Large Marine Ecosystem. First, we evaluated wave energy facility development using the Wave Energy Model (WEM) of the Integrated Valuation of Ecosystem Services and Trade-offs (InVEST) toolkit. Second, we ran spatial analyses on model output to identify conflicts with existing marine uses including AIS based vessel traffic, VMS and observer based measures of commercial fishing effort, and marine conservation areas. We found that regions with the highest wave energy potential were distant from major cities and that infrastructure limitations (cable landing sites) restrict integration with existing power grids. We identified multiple spatial conflicts with existing marine uses; especially shipping vessels and various commercial fishing fleets, and overlap with marine conservation areas varied by conservation designation. While wave energy generation facilities may be economically viable in the California Current, this viability must be considered within the context of the costs associated with conflicts that arise with existing marine uses. Our analyses can be used to better inform placement of WEC devices (as well as other types of renewable energy facilities) in the context of marine planning by accounting for economic tradeoffs

  3. AN INVESTIGATION OF WAVE ENERGY POTENTIAL IN WESTERN BLACK SEA REGION

    Directory of Open Access Journals (Sweden)

    İlyas UYGUR

    2006-01-01

    Full Text Available The main energy sources which are natural, clean, environmentally friendly, and renewable are wind power, solar energy, biomass energy, hydro energy, and wave energy. The wave energy has no cost except for the first investment and maintenance. There is also no cost for input energy. Besides these, it has no pollution effect on the environment, it is cheap and there is a huge potential all around the world. Wave energy is a good opportunity to solve the energy problem for Turkey which is surrounded by seas. Concerning all these facts, it has been conducted some studies which included five years of observation in the Western Black Sea Region (Akçakoca. The wave energy potential has also been calculated. From this sutdy results, it can be concluded that the wave energy potential of this region is inefficient. It is believed that by the improvement of the new energy converter devices in future, this low potential can be used more efficiently and as a result this study might be used as a basis for the future researches.

  4. Estimation of Downtime and of Missed Energy Associated with a Wave Energy Converter by the Equivalent Power Storm Model

    Directory of Open Access Journals (Sweden)

    Felice Arena

    2015-10-01

    Full Text Available The design of any wave energy converter involves the determination of relevant statistical data on the wave energy resource oriented to the evaluation of the structural reliability and energy performance of the device. Currently, limited discussions concern the estimation of parameters connected to the energy performance of a device. Thus, this paper proposes a methodology for determining average downtime and average missed energy, which is the energy that is not harvested because of device deactivations during severe sea storms. These quantities are fundamental for evaluating the expected inactivity of a device during a year or during its lifetime and are relevant for assessing the effectiveness of a device working at a certain site. For this purpose, the equivalent power storm method is used for their derivation, starting from concepts pertaining to long-term statistical analysis. The paper shows that the proposed solutions provide reliable estimations via comparison with results obtained by processing long wave data.

  5. Study on planar blast waves initiated by gaseous detonations. I. Estimation of initiation energy

    Energy Technology Data Exchange (ETDEWEB)

    Ohyagi, S.; Yoshihashi, T.; Harigaya, Y.

    1985-01-01

    An experimental study has been made of the initiation of planar blast waves by gaseous detonations. A gaseous detonation initiated by a DDT process is submitted into a long tube filled with air at various initial pressures. The measurement of the decay process of a produced shock wave indicates that it can be treated as a plane source blast wave, although there exists a secondary shock wave, which may be a detonation wave reflected on an end wall of a driver tube, behind the blast wave front. As a result, the decay of a propagation Mach number and a peak overpressure of the wave front as a function of a distance from the initiation source and the initial pressure of the medium are described by the quasi-similar theory of the idealized plane source blast wave. Comparing the experimental results with the theory leads to the estimation of an initiation energy of the blast wave. The initiation energies of oxyhydrogen detonations for three different mixture strengths, three different initial pressures, and two different sizes of the driver tube are estimated to show that about 30-40 percent of the chemical energy contained initially in the driver tube is used to initiate the blast wave. 9 references.

  6. Omni-directional lens for structure-borne wave focusing and energy harvesting

    Science.gov (United States)

    Tol, S.; Degertekin, F. L.; Erturk, A.

    2017-04-01

    In this paper, a Luneburg lens is explored for omnidirectional structure-borne wave focusing both numerically and experimentally. The proposed lens is formed by radially distributed blind holes with different diameters based on the gradient index phononic crystal theory. The radial orientation and diameter of the holes are determined according to the refractive index distribution which is guided by finite-element simulations of the lowest asymmetric mode Lamb wave band diagrams. According to this design, the wave travels slower at the center of the lens and converges at the focal spot which is on the circular lens boundary. Wave simulations are performed in COMSOL Multiphysics® under plane wave excitation from a line source and wave focusing is observed at the opposite border of the lens with respect to the incoming wave direction. Experimentally measured wave fields with a scanning laser vibrometer successfully validate simulated wave focusing. Furthermore, omnidirectionality is verified by testing the lens under plane wave excitation from different directions. With piezoelectric energy harvesters located at the boundary of the Luneburg lens substantially larger power output can be obtained as compared to the baseline case of energy harvesting without the lens on the uniform plate counterpart for the same incident plane wave excitation.

  7. The energy transport by the propagation of sound waves in wave guides with a moving medium

    NARCIS (Netherlands)

    le Grand, P.

    1977-01-01

    The problem of the propagation of sound waves radiated by a source in a fluid moving with subsonic velocity between two parallel walls or inside a cylindrical tube is considered in [2], The most interesting thing of this problem is that waves may occur with constant amplitude coming from infinity.

  8. Quantification of Wave Model Uncertainties Used for Probabilistic Reliability Assessments of Wave Energy Converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kofoed, Jens Peter; Sørensen, John Dalsgaard

    2015-01-01

    data are collected from published scientific research. The bias and the root-mean-square error, as well as the scatter index, are considered for the significant wave height as well as the mean zero-crossing wave period. Based on an illustrative generic example, this paper presents how the quantified...

  9. Determination of Wave Model Uncertainties used for Probabilistic Reliability Assessments of Wave Energy Devices

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kofoed, Jens Peter; Sørensen, John Dalsgaard

    2014-01-01

    data is collected from published scientific research. The bias, the root-mean-square error as well as the scatter index are considered for the significant wave height as well as the mean zero-crossing wave period. Based on an illustrative generic example it is shown how the estimated uncertainties can...

  10. Generation of Alfvén wave energy during magnetic reconnection in Hall MHD

    Science.gov (United States)

    Li, Lingjie; Ma, Zhiwei; Wang, Licheng

    2017-10-01

    The effect of the reconnection rate on the generation of Alfvén wave energy is systematically investigated using Hall magnetohydrodynamics (MHD). It is well known that a decrease in magnetic energy is proportional to the reconnection rate. It is found that an instantaneous increase in Alfvén wave energy in unit Alfvén time is the square dependence on the reconnection rate. The converted Alfvén wave energy is strongly enhanced due to the large increase in the reconnection rate in Hall MHD. For solar-terrestrial plasmas, the maximum converted Alfvén wave energy in unit Alfvén time with the Hall effect can be over 50 times higher than that without the Hall effect during magnetic reconnection.

  11. Nonlinear PTO Effect on Performance of Vertical Axisymmetric Wave Energy Converter Using Semi-Analytical Method

    Directory of Open Access Journals (Sweden)

    Liu Ming

    2017-11-01

    Full Text Available The wave energy, as a clean and non-pollution renewable energy sources, has become a hot research topic at home and abroad and is likely to become a new industry in the future. In this article, to effectively extract and maximize the energy from ocean waves, a vertical axisymmetric wave energy converter (WEC was presented according to investigating of the advantages and disadvantages of the current WEC. The linear and quadratic equations in frequency-domain for the reactive controlled single-point converter property under regular waves condition are proposed for an efficient power take-off (PTO. A method of damping coefficients, theoretical added mass and exciting force are calculated with the analytical method which is in use of the series expansion of eigen functions. The loads of optimal reactive and resistive, the amplitudes of corresponding oscillation, and the width ratios of energy capture are determined approximately and discussed in numerical results.

  12. A Methodology for Production and Cost Assessment of a Farm of Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, C.; Troch, P.; Kofoed, Jens Peter

    2011-01-01

    the power production and cost of a farm of WECs is applied to the Wave Dragon Wave Energy Converter (WD–WEC). The WD–WEC is a floating offshore converter of the overtopping type, which captures the water volume of overtopped waves in a basin above mean sea level and produces power when the water drains back......To generate a substantial amount of power, Wave Energy Converters (WECs) are arranged in several rows or in a ‘farm’. Both the power production and cost of a farm are lay-out dependent. In this paper, the wave power redistribution in and around three farm lay-outs in a near shore North Sea wave...

  13. Reliability-based Calibration of Partial Safety Factors for Wave Energy Converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Kramer, Morten Mejlhede; Sørensen, John Dalsgaard

    2015-01-01

    Wave energy converters (WECs), which harvest energy from the waves and transfer them to electricity, are a new technology, where structural standards need to be developed. An important step towards standardization is the calibration of partial safety factors. A methodology for calibration...... of partial safety factors for design of welded details for wave energy converter applications is presented in this paper using probabilistic methods. The paper presents an example with focus on the Wavestar device. SN curves and Rainflow counting are used to model fatigue without considering inspections...

  14. Kinematics and Dynamics of a Tensegrity-Based Water Wave Energy Harvester

    Directory of Open Access Journals (Sweden)

    Min Lin

    2016-01-01

    Full Text Available A tensegrity-based water wave energy harvester is proposed. The direct and inverse kinematic problems are investigated by using a geometric method. Afterwards, the singularities and workspaces are discussed. Then, the Lagrangian method was used to develop the dynamic model considering the interaction between the harvester and water waves. The results indicate that the proposed harvester allows harvesting 13.59% more energy than a conventional heaving system. Therefore, tensegrity systems can be viewed as one alternative solution to conventional water wave energy harvesting systems.

  15. Flow under standing waves Part 1. Shear stress distribution, energy flux and steady streaming

    DEFF Research Database (Denmark)

    Gislason, Kjartan; Fredsøe, Jørgen; Deigaard, Rolf

    2009-01-01

    The conditions for energy flux, momentum flux and the resulting streaming velocity are analysed for standing waves formed in front of a fully reflecting wall. The exchange of energy between the outer wave motion and the near bed oscillatory boundary layer is considered, determining the horizontal...... energy flux inside and outside the boundary layer. The momentum balance, the mean shear stress and the resulting time averaged streaming velocities are determined. For a laminar bed boundary layer the analysis of the wave drift gives results similar to the original work of Longuet-Higgins from 1953...

  16. Energy extraction from ocean currents and waves: Mapping the most promising locations

    Science.gov (United States)

    Ordonez, A.; Hamlington, P.; Fox-Kemper, B.

    2012-12-01

    Concerns about fossil fuel supplies and an ever-increasing demand for energy have prompted the search for alternative power sources. One option is the ocean, a power-dense and renewable source of energy, but its capacity to meet human energy demands is poorly understood. Although raw wave energy resources have been investigated at many scales, there is still substantial uncertainty regarding how much useful power can be extracted. Even less is known about the energy available in ocean currents, especially on a global scale. Moreover, no studies have attempted to examine wave and current energy simultaneously while at the same time taking into account geographical, environmental, and technical factors that can substantially limit the amount of extractable energy. In this study, we use high fidelity oceanographic model data to assess the availability, recoverability, and value of energy in ocean wind waves and currents. Global wave energy transport, coastal wave energy flux, and current energy are calculated and mapped using the model data. These maps are then incorporated into a geographic information system (GIS) in order to assess the U.S. recoverable ocean energy resource. In the GIS, the amount of recoverable energy is estimated by combining the power output from realistic wave and current energy farms with physical and ecological data such as bathymetry and environmentally protected areas. This holistic approach is then used to examine the distribution and value of extractable wave and current energy along the U.S. coast. The results support previous studies that show that the U.S. West Coast has large potential for wave energy extraction and that the Florida Strait has high potential for current energy extraction. We also show that, at any particular location, the amount of available ocean energy is only one factor of many that determines the ultimate feasibility and value of the energy. We outline ways in which the GIS framework used in this assessment can be

  17. Unusual energy properties of leaky backward Lamb waves in a submerged plate.

    Science.gov (United States)

    Nedospasov, I A; Mozhaev, V G; Kuznetsova, I E

    2017-05-01

    It is found that leaky backward Lamb waves, i.e. waves with negative energy-flux velocity, propagating in a plate submerged in a liquid possess extraordinary energy properties distinguishing them from any other type of waves in isotropic media. Namely, the total time-averaged energy flux along the waveguide axis is equal to zero for these waves due to opposite directions of the longitudinal energy fluxes in the adjacent media. This property gives rise to the fundamental question of how to define and calculate correctly the energy velocity in such an unusual case. The procedure of calculation based on incomplete integration of the energy flux density over the plate thickness alone is applied. The derivative of the angular frequency with respect to the wave vector, usually referred to as the group velocity, happens to be close to the energy velocity defined by this mean in that part of the frequency range where the backward mode exists in the free plate. The existence region of the backward mode is formally increased for the submerged plate in comparison to the free plate as a result of the liquid-induced hybridization of propagating and nonpropagating (evanescent) Lamb modes. It is shown that the Rayleigh's principle (i.e. equipartition of total time-averaged kinetic and potential energies for time-harmonic acoustic fields) is violated due to the leakage of Lamb waves, in spite of considering nondissipative media. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Geometrical Optimization for Improved Power Capture of Multi-Level Overtopping Based Wave Energy Converters

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Victor, L.; Kofoed, Jens Peter

    2009-01-01

    In multi-level wave energy converters the water from incoming waves is stored in reservoirs one on top of the other. Prevision formula for the overtopping flow rates in the individual reservoirs is fundamental for dimensioning correctly the turbines and optimizing the device. Having a number...... words, the opening between two consecutive reservoirs. 13 different geometries have been tested in 2D irregular waves and a new formulation for prediction of overtopping in multilevel structures is presented....

  19. Mechanisms of Surface Wave Energy Dissipation over a Fluid Mud Sediment Suspension

    Science.gov (United States)

    Traykovski, P.; Trowbridge, J. H.; Kineke, G. C.

    2014-12-01

    Field observations from the spring of 2008 on the Louisiana shelf were used to elucidate the mechanisms of wave energy dissipation over a muddy seafloor. After a period of high discharge from the Atchafalaya River acoustic measurements showed the presence of 20 cm thick mobile fluid mud layers during and after wave events. While total wave energy dissipation (D) was greatest during the high energy periods, these periods had relatively low normalized attenuation rates (Κ = Dissipation/Energy Flux). During declining wave energy conditions, as the fluid mud layer settled, the attenuation process became more efficient with high Κ and low D. The transition from high D and low Κ to high Κ and low D was caused by a transition from turbulent to laminar flow in the fluid mud layer as measured by a Pulse-coherent Doppler profiler. Measurements of the oscillatory boundary layer velocity profile in the fluid mud layer during laminar flow reveal a very thick wave boundary layer with curvature filling the entire fluid mud layer, suggesting a kinematic viscosity two to three orders of magnitude greater than clear water. This high viscosity is also consistent with a high wave attenuation rates measured by across shelf energy flux differences. The transition to turbulence was forced by instabilities on the lutocline, with wavelengths consistent with the dispersion relation for this two layer system. The measurements also provide new insight into the dynamics of wave supported turbidity flows during the transition from a laminar to turbulent fluid mud layer.

  20. Energy transformations and dissipation of nonlinear internal waves over New Jersey's continental shelf

    Directory of Open Access Journals (Sweden)

    E. L. Shroyer

    2010-08-01

    Full Text Available The energetics of large amplitude, high-frequency nonlinear internal waves (NLIWs observed over the New Jersey continental shelf are summarized from ship and mooring data acquired in August 2006. NLIW energy was typically on the order of 105 Jm−1, and the wave dissipative loss was near 50 W m−1. However, wave energies (dissipations were ~10 (~2 times greater than these values during a particular week-long period. In general, the leading waves in a packet grew in energy across the outer shelf, reached peak values near 40 km inshore of the shelf break, and then lost energy to turbulent mixing. Wave growth was attributed to the bore-like nature of the internal tide, as wave groups that exhibited larger long-term (lasting for a few hours displacements of the pycnocline offshore typically had greater energy inshore. For ship-observed NLIWs, the average dissipative loss over the region of decay scaled with the peak energy in waves; extending this scaling to mooring data produces estimates of NLIW dissipative loss consistent with those made using the flux divergence of wave energy. The decay time scale of the NLIWs was approximately 12 h corresponding to a length scale of 35 km (O(100 wavelengths. Imposed on these larger scale energetic trends, were short, rapid exchanges associated with wave interactions and shoaling on a localized topographic rise. Both of these events resulted in the onset of shear instabilities and large energy loss to turbulent mixing.

  1. On the modifications of near-inertial waves at fronts: implications for energy transfer across scales

    Science.gov (United States)

    Thomas, Leif N.

    2017-10-01

    In the ocean, wind-generated kinetic energy (KE) manifests itself primarily in balanced currents and near-inertial waves. The dynamics of these flows is strongly constrained by the Earth's rotation, causing the KE in balanced currents to follow an inverse cascade but also preventing wave-wave interactions from fluxing energy in the near-inertial band to lower frequencies and higher vertical wavenumbers. How wind-generated KE is transferred to small-scale turbulence and dissipated is thus a non-trivial problem. This article presents a review of recent theoretical calculations and numerical simulations that demonstrate how some surprising modifications to internal wave physics by the lateral density gradients present at ocean fronts allow for strong interactions between balanced currents and near-inertial waves that ultimately result in energy loss for both types of motion.

  2. Technical and Non-Technical Issues towards the Commercialisation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez

    The thesis elaborates on the necessary steps and on the different difficulties that appear during the development of a wave energy converter (WEC). It focuses on seven key areas which appear when a WEC is going through the initial sea trials. As examined throughout the thesis, all these subjects...... sector: the predictability of waves, and assesses the value of wave forecasting in electricity markets. . vii. Lastly, it reviews the economic assessment of wave energy projects. . The scope of the thesis is broad and embraces subjects that can be categorised within technical and non...... are of relevance to successfully reach the commercialisation of WECs and need attention from the sector as such, not least from device developers. The thesis is presented in two parts: a main introduction and a collection of papers. The first part provides a brief history of wave energy, introduces the research...

  3. Fundamental Studies On Development Of MHD (Magnetohydrodynamic) Generator Implement On Wave Energy Harvesting

    Science.gov (United States)

    Majid, M. F. M. A.; Apandi, Muhamad Al-Hakim Md; Sabri, M.; Shahril, K.

    2016-02-01

    As increasing of agricultural and industrial activities each year has led to an increasing in demand for energy. Possibility in the future, the country was not able to offer a lot of energy and power demand. This means that we need to focus on renewable energy to supply the demand for energy. Energy harvesting is among a method that can contribute on the renewable energy. MHD power generator is a new way to harvest the energy especially Ocean wave energy. An experimental investigation was conducted to explore performance of MHD generator. The effect of intensity of NaCl Solution (Sea Water), flow rate of NaCl solution, magnetic strength and magnet position to the current produce was analyzed. The result shows that each factor is give a significant effect to the current produce, because of that each factor need to consider on develop of MHD generator to harvest the wave energy as an alternative way to support the demand for energy.

  4. Effects of Mooring Systems on the Performance of a Wave Activated Body Energy Converter

    DEFF Research Database (Denmark)

    Zanuttigh, Barbara; Angelelli, Elisa; Kofoed, Jens Peter

    2013-01-01

    Aim of this paper is to analyse the power and hydraulic performance of a floating Wave Energy Converter with the purpose at optimising its design for installation in arrays. The paper presents new experiments carried out in 1:30 scale on a single device of the Wave Activated Body type in the deep...

  5. Hydrodynamic Behavior of Overtopping Wave Energy Converters Built in Sea Defense Structures

    DEFF Research Database (Denmark)

    Victor, Lander; Kofoed, Jens Peter; Troch, Peter

    2010-01-01

    Many sea defense structures need to be adapted to the rising sea water level and changing wave climate due to global warming. The accordingly required investment opens perspectives for wave energy converters (WECs) – that are built as part of the sea defense structures – to become economically vi...

  6. Sea spray aerosol and wave energy dissipation in the surf zone

    NARCIS (Netherlands)

    Francius, M.J.; Piazzola, J.; Forget, P.; Calve, O. le; Kusmierczyk-Michulec, J.

    2007-01-01

    Results from a quantitative model for the prediction of the sea-salt mass flux produced in the surf zone are presented in this paper. The model relates the surf zone sea salt mass flux to the amount of wave energy dissipated in the surf zone. In order to apply this aerosol emission model, a wave

  7. Experimental Hydraulic Optimization of the Wave Energy Converter Seawave Slot-Cone Generator

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter

    This report presents the results of a experimental hydraulic optimization of the wave energy convert (WEC) Seawave Slot-Cone Generator (SSG). SSG is a WEC utilizing wave overtopping in multiple reservoirs. In the present SSG setup three reservoirs has been used. Model tests have been performed...

  8. Energy spectrum analysis of blast waves based on an improved Hilbert-Huang transform

    Science.gov (United States)

    Li, L.; Wang, F.; Shang, F.; Jia, Y.; Zhao, C.; Kong, D.

    2017-05-01

    Using the improved Hilbert-Huang transform (HHT), this paper investigates the problems of analysis and interpretation of the energy spectrum of a blast wave. It has been previously established that the energy spectrum is an effective feature by which to characterize a blast wave. In fact, the higher the energy spectra in a frequency band of a blast wave, the greater the damage to a target in the same frequency band. However, most current research focuses on analyzing wave signals in the time domain or frequency domain rather than considering the energy spectrum. We propose here an improved HHT method combined with a wavelet packet to extract the energy spectrum feature of a blast wave. When applying the HHT, the signal is first roughly decomposed into a series of intrinsic mode functions (IMFs) by empirical mode decomposition. The wavelet packet method is then performed on each IMF to eliminate noise on the energy spectrum. Second, a coefficient is introduced to remove unrelated IMFs. The energy of each instantaneous frequency can be derived through the Hilbert transform. The energy spectrum can then be obtained by adding up all the components after the wavelet packet filters and screens them through a coefficient to obtain the effective IMFs. The effectiveness of the proposed method is demonstrated by 12 groups of experimental data, and an energy attenuation model is established based on the experimental data. The improved HHT is a precise method for blast wave signal analysis. For other shock wave signals from blasting experiments, an energy frequency time distribution and energy spectrum can also be obtained through this method, allowing for more practical applications.

  9. Experimental Update of the Overtopping Model Used for the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, Erik

    2013-01-01

    An overtopping model specifically suited for Wave Dragon is needed in order to improve the reliability of its performance estimates. The model shall be comprehensive of all relevant physical processes that affect overtopping and flexible to adapt to any local conditions and device configuration....... An experimental investigation is carried out to update an existing formulation suited for 2D draft-limited, low-crested structures, in order to include the effects on the overtopping flow of the wave steepness, the 3D geometry of Wave Dragon, the wing reflectors, the device motions and the non-rigid connection...... between platform and reflectors. The study is carried out in four phases, each of them specifically targeted at quantifying one of these effects through a sensitivity analysis and at modeling it through custom-made parameters. These are depending on features of the wave or the device configuration, all...

  10. Experimental Update of the Overtopping Model Used for the Wave Dragon Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Erik Friis-Madsen

    2013-04-01

    Full Text Available An overtopping model specifically suited for Wave Dragon is needed in order to improve the reliability of its performance estimates. The model shall be comprehensive of all relevant physical processes that affect overtopping and flexible to adapt to any local conditions and device configuration. An experimental investigation is carried out to update an existing formulation suited for 2D draft-limited, low-crested structures, in order to include the effects on the overtopping flow of the wave steepness, the 3D geometry of Wave Dragon, the wing reflectors, the device motions and the non-rigid connection between platform and reflectors. The study is carried out in four phases, each of them specifically targeted at quantifying one of these effects through a sensitivity analysis and at modeling it through custom-made parameters. These are depending on features of the wave or the device configuration, all of which can be measured in real-time. Instead of using new fitting coefficients, this approach allows a broader applicability of the model beyond the Wave Dragon case, to any overtopping WEC or structure within the range of tested conditions. Predictions reliability of overtopping over Wave Dragon increased, as the updated model allows improved accuracy and precision respect to the former version.

  11. Theory of energy and power flow of plasmonic waves on single-walled carbon nanotubes

    Science.gov (United States)

    Moradi, Afshin

    2017-10-01

    The energy theorem of electrodynamics is extended so as to apply to the plasmonic waves on single-walled carbon nanotubes which propagate parallel to the axial direction of the system and are periodic waves in the azimuthal direction. Electronic excitations on the nanotube surface are modeled by an infinitesimally thin layer of free-electron gas which is described by means of the linearized hydrodynamic theory. General expressions of energy and power flow associated with surface waves are obtained by solving Maxwell and hydrodynamic equations with appropriate boundary conditions. Numerical results for the transverse magnetic mode show that energy, power flow, and energy transport velocity of the plasmonic waves strongly depend on the nanotube radius in the long-wavelength region.

  12. Comment on 'Energy in one-dimensional linear waves in a string'

    Science.gov (United States)

    Butikov, Eugene I.

    2011-11-01

    In this communication we comment on numerous erroneous statements in a recent letter to this journal by Burko (Eur. J. Phys. 2010 31 L71-7) concerning the energy transferred by transverse waves in a stretched string.

  13. Alaskan wave and river hydrokinetic energy resource assessment, river energy converter testing and surface debris mitigation performance

    Science.gov (United States)

    Johnson, J.; Kasper, J.; Schmid, J.; Duvoy, P.; Ravens, T. M.; Hansen, N.; Montlaur, A.

    2014-12-01

    The Alaska Hydrokinetic Energy Research Center (AHERC) is conducting a wave energy assessment study at Yakutat, Alaska, and conducting ongoing river technology studies at the Tanana River Tests Site (TRTS) at Nenana, Alaska. In Aug. 2013 an acoustic Doppler current profiler (ADCP) was deployed in 40 m of water off Cannon Beach in Yakutat, AK as part of the Yakutat area wave energy resource assessment. Over the course of the 1.5 year deployment, the ADCP will record area wave and current data in order to verify the area wave energy resource. Preliminary data analysis shows a vigorous wave field with maximum wave heights up to 16 m in Nov. 2013. In addition to the in-situ directional wave data recorded by the ADCP, a SWAN wave climatology spanning the past 20 years is being developed along with a simulation of the wave field for the near shore (5 mhydrokinetic turbine from river debris flows and to determine the effect of RDDP generated river current turbulence on turbine efficiency. Previous tests have shown that the RDDP effectively sheds debris, however, large debris objects can cause RDDP rotation about its mooring point requiring that a stable attachment between the RDDP and protected floating structure be in place to ensure that debris is diverted away from the protected structure. Performance tests of an Oceana hydrokinetic power turbine will be conducted in late August or early September, 2014 at the TRTS in realistic Alaskan river conditions of current turbulence, high sediment flow and debris. Measurements of river sediment concentration, current velocity and river stage will be made, and current turbulence will be derived. CFD simulations of the RDDP interaction with the river flow will be completed to compare current velocity and turbulence results, depending on the opening angle of the device. Study activities and results will be presented.

  14. Implementation of viscoelastic mud-induced energy attenuation in the third-generation wave model, SWAN

    Science.gov (United States)

    Beyramzade, Mostafa; Siadatmousavi, Seyed Mostafa

    2017-11-01

    The interaction of waves with fluid mud can dissipate the wave energy significantly over few wavelengths. In this study, the third-generation wave model, SWAN, was advanced to include attenuation of wave energy due to interaction with a viscoelastic fluid mud layer. The performances of implemented viscoelastic models were verified against an analytical solution and viscous formulations for simple one-dimensional propagation cases. Stationary and non-stationary test cases in the Surinam coast and the Atchafalaya Shelf showed that the inclusion of the mud-wave interaction term in the third-generation wave model enhances the model performance in real applications. A high value of mud viscosity (of the order of 0.1 m2/s) was required in both field cases to remedy model overestimation at high frequency ranges of the wave spectrum. The use of frequency-dependent mud viscosity value improved the performance of model, especially in the frequency range of 0.2-0.35 Hz in the wave spectrum. In addition, the mud-wave interaction might affect the high frequency part of the spectrum, and this part of the wave spectrum is also affected by energy transfer from wind to waves, even for the fetch lengths of the order of 10 km. It is shown that exclusion of the wind input term in such cases might result in different values for parameters of mud layer when inverse modeling procedure was employed. Unlike viscous models for wave-mud interaction, the inverse modeling results to a set of mud parameters with the same performance when the viscoelastic model is used. It provides an opportunity to select realistic mud parameters which are in more agreement with in situ measurements.

  15. Energy, institutions and development: rightfulness and institutional conditions of a spreading of renewable energies in developing countries. The example of power generation for networks; Rapport de stage et memoire de DESS. Energie, institutions et developpement: legitimite et conditions institutionnelles d'une diffusion des energies renouvelables dans les pays en voie de developpement. L'exemple de l'electricite en reseau

    Energy Technology Data Exchange (ETDEWEB)

    Richard, M

    2004-07-01

    This study treats of the rightfulness of the promotion of renewable energy sources in a developing country like Brazil. It examines the economical and financial barriers to get over and the mechanisms necessary to be implemented to sustain the investment in renewable energy sources: institutional security, regulatory and administrative stability, long-term warranty, consistency between actions, transparency, credibility etc. (J.S.)

  16. Rock noise accompanying mining: a comparison of release rates of seismic wave and strain energy

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Y.; Ishijima, Y.

    1986-01-01

    To get a better understanding of the rock noise that accompanies mining, estimates have been made of the rates of release of seismic wave energy and strain energy. The seismic wave energy was estimated using the empirical equations of Muramatsu and of Gutenberg and Richter. For the estimation of the strain energy release rate, a three-dimensional displacement offsetting technique was applied to a numerical model. It has been found that, although the release rates associated with the two types of energy behave analogously, the absolute values obtained differ by several orders of magnitude. This result is thought to be due to the efficiency involved in seismic waves, and to the method used for calculating the strain energy. 3 references, 5 figures, 1 table.

  17. Energy decay of a variable-coefficient wave equation with nonlinear time-dependent localized damping

    Directory of Open Access Journals (Sweden)

    Jieqiong Wu

    2015-09-01

    Full Text Available We study the energy decay for the Cauchy problem of the wave equation with nonlinear time-dependent and space-dependent damping. The damping is localized in a bounded domain and near infinity, and the principal part of the wave equation has a variable-coefficient. We apply the multiplier method for variable-coefficient equations, and obtain an energy decay that depends on the property of the coefficient of the damping term.

  18. Can cellulite be treated with low-energy extracorporeal shock wave therapy?

    OpenAIRE

    Angehrn, Fiorenzo; Kuhn, Christoph; Voss, Axel

    2007-01-01

    Fiorenzo Angehrn1, Christoph Kuhn1, Axel Voss21Klinik Piano, Gottstattstrasse 24, Biel, Switzerland; 2SwiTech Medical AG, Kreuzlingen, SwitzerlandAbstract: The present study investigates the effects of low-energy defocused extracorporeal generated shock waves on collagen structure of cellulite afflicted skin. Cellulite measurement using high-resolution ultrasound technology was performed before and after low-energy defocused extracorporeal shock wave therapy (ESWT) in 21 female subjects. ESWT...

  19. Comparative numerical and experimental study of two combined wind and wave energy concepts

    OpenAIRE

    Gao, Zhen; Moan, Torgeir; Wan, Ling; Michailides, Constantine

    2016-01-01

    With a successful and rapid development of offshore wind industry and increased research activities on wave energy conversion in recent years, there is an interest in investigating the technological and economic feasibility of combining offshore wind turbines (WTs) with wave energy converters (WECs). In the EU FP7 MARINA Platform project, three floating combined concepts, namely the spar torus combination (STC), the semi-submersible flap combination (SFC) and the oscillating water column (OWC...

  20. The Concept of a New Wave Energy Converter - the CECO

    Directory of Open Access Journals (Sweden)

    Paulo Jorge Rosa Santos

    2014-06-01

    The proof of concept of this patented WEC was carried out at the Hydraulics Laboratory of the Faculty of Engineering of the University of Porto, on a geometrical scale of 1:20. The paper presents some results of those tests and analyses the CECO response for different wave conditions and modes of operation (power take-off damping level and WEC inclination. Two different techniques were used to evaluate the power absorbed. The analysis is based on the measured motion, velocity and acceleration time series, the mean absorbed power and corresponding relative capture widths. The potential of this new concept was confirmed, as relative capture widths of up to 30% were obtained. In addition, these results are expected to improve after optimizing some components of this WEC. Figure 1. Representation of CECO (a and its mode of operation: (b upward motion - the wave crest passes by the LMM; (c downward motion - the wave trough passes by LMM.

  1. AN APPROACH TO WAVE ENERGY CONVERTER APPLICATIONS ON TURKEY AND THEIR ELECTRICITY GENERATION CAPACITY

    Directory of Open Access Journals (Sweden)

    ABDI KUKNER

    2016-06-01

    Full Text Available Increasing the amount of research on renewable wave energy in Turkey has been getting crucial recently to reduce its energy dependence on exhaustible natural energy resources. The purpose of this study is to determine the electrical energy potential obtainable from the wave energy converters in Turkey. Firstly, different type of wave energy conversion systems have been investigated and as a result of the review, the Oscillating Water Column (OWC is considered to be most effective energy converter due to a suitable power generation system. The scope of the study is to evaluate and compare the wave energy potential between different regions of Turkey by using available wind and wave data. Five different coastal regions selected along the coastline of Black and Mediterranean Sea and Iğneada is considered to be most effective region because of their highest wavelength. In addition, OWC is modeled as a system using the pressed air in a column and it is mathematically described as a difference in pressure and expressed by the Bernoulli equation. General equations of motion of a system subject to forced oscillation are derived, and then, the components of the damping coefficient are investigated by using the optimization theory. After that, the theory developed in the previous part has been applied to Iğneada Region in Black Sea. It is finally shown that how much electricity needs to be met by using OWC system.

  2. A framework for assessing the uncertainty in wave energy delivery to targeted subsurface formations

    KAUST Repository

    Karve, Pranav M.

    2016-02-01

    © 2015 Elsevier B.V. Stress wave stimulation of geological formations has potential applications in petroleum engineering, hydro-geology, and environmental engineering. The stimulation can be applied using wave sources whose spatio-temporal characteristics are designed to focus the emitted wave energy into the target region. Typically, the design process involves numerical simulations of the underlying wave physics, and assumes a perfect knowledge of the material properties and the overall geometry of the geostructure. In practice, however, precise knowledge of the properties of the geological formations is elusive, and quantification of the reliability of a deterministic approach is crucial for evaluating the technical and economical feasibility of the design. In this article, we discuss a methodology that could be used to quantify the uncertainty in the wave energy delivery. We formulate the wave propagation problem for a two-dimensional, layered, isotropic, elastic solid truncated using hybrid perfectly-matched-layers (PMLs), and containing a target elastic or poroelastic inclusion. We define a wave motion metric to quantify the amount of the delivered wave energy. We, then, treat the material properties of the layers as random variables, and perform a first-order uncertainty analysis of the formation to compute the probabilities of failure to achieve threshold values of the motion metric. We illustrate the uncertainty quantification procedure using synthetic data.

  3. Coupled Wave Energy and Erosion Dynamics along a Salt Marsh Boundary, Hog Island Bay, Virginia, USA

    Directory of Open Access Journals (Sweden)

    Anthony M. Priestas

    2015-09-01

    Full Text Available The relationship between lateral erosion of salt marshes and wind waves is studied in Hog Island Bay, Virginia USA, with high-resolution field measurements and aerial photographs. Marsh retreat is compared to wave climate calculated in the bay using the spectral wave-model Simulating Waves Nearshore (SWAN. We confirm the existence of a linear relationship between long-term salt marsh erosion and wave energy, and show that wave power can serve as a good proxy for average salt-marsh erosion rates. At each site, erosion rates are consistent across several temporal scales, ranging from months to decades, and are strongly related to wave power. On the contrary, erosion rates vary in space and weakly depend on the spatial distribution of wave energy. We ascribe this variability to spatial variations in geotechnical, biological, and morphological marsh attributes. Our detailed field measurements indicate that at a small spatial scale (tens of meters, a positive feedback between salt marsh geometry and wave action causes erosion rates to increase with boundary sinuosity. However, at the scale of the entire marsh boundary (hundreds of meters, this relationship is reversed: those sites that are more rapidly eroding have a marsh boundary which is significantly smoother than the marsh boundary of sheltered and slowly eroding marshes.

  4. High-Resolution Wave Energy Assessment in Shallow Water Accounting for Tides

    Directory of Open Access Journals (Sweden)

    Dina Silva

    2016-09-01

    Full Text Available The wave energy in a shallow water location is evaluated considering the influence of the local tide and wind on the wave propagation. The target is the coastal area just north of the Portuguese city of Peniche, where a wave energy converter operates on the sea bottom. A wave modelling system based on SWAN has been implemented and focused on this coastal environment in a multilevel computational scheme. The first three SWAN computational belonging to this wave prediction system were defined using the spherical coordinates. In the highest resolution computational domain, Cartesian coordinates have been considered, with a resolution of 25 m in both directions. An in-depth analysis of the main characteristics of the environmental matrix has been performed. This is based on the results of eight-year model system simulations (2005–2012. New simulations have been carried out in the last two computational domains with the most relevant wave and wind patterns, considering also the tide effect. The results show that the tide level, together with the wind intensity and direction, may influence to a significant degree the wave characteristics. This especially concerns the wave power in the location where the wave converter operates.

  5. A nanowire based triboelectric nanogenerator for harvesting water wave energy and its applications

    Science.gov (United States)

    Li, Xiaoyi; Tao, Juan; Zhu, Jing; Pan, Caofeng

    2017-07-01

    The ocean wave energy is one of the most promising renewable and clean energy sources for human life, which is the so-called "Blue energy." In this work, a nanowire based triboelectric nanogenerator was designed for harvesting wave energy. The nanowires on the surface of FEP largely raise the contacting area with water and also make the polymer film hydrophobic. The output can reach 10 μ A and 200 V. When combined with a capacitor, an infrared emitter, and a receiver, a self-powered wireless infrared system is fabricated, which can be used in the fields of communication and detecting.

  6. A nanowire based triboelectric nanogenerator for harvesting water wave energy and its applications

    Directory of Open Access Journals (Sweden)

    Xiaoyi Li

    2017-07-01

    Full Text Available The ocean wave energy is one of the most promising renewable and clean energy sources for human life, which is the so-called “Blue energy.” In this work, a nanowire based triboelectric nanogenerator was designed for harvesting wave energy. The nanowires on the surface of FEP largely raise the contacting area with water and also make the polymer film hydrophobic. The output can reach 10 μ A and 200 V. When combined with a capacitor, an infrared emitter, and a receiver, a self-powered wireless infrared system is fabricated, which can be used in the fields of communication and detecting.

  7. Non-Linear Numerical Modeling and Experimental Testing of a Point Absorber Wave Energy Converter

    DEFF Research Database (Denmark)

    Zurkinden, Andrew Stephen; Ferri, Francesco; Beatty, S.

    2014-01-01

    A time domain model is applied to a three-dimensional point absorber wave energy converter. The dynamical properties of a semi-submerged hemisphere oscillating around a pivot point where the vertical height of this point is above the mean water level are investigated. The numerical model includes.......e. H/λ≤0.02. For steep waves, H/λ≥0.04 however, the relative velocities between the body and the waves increase thus requiring inclusion of the non-linear hydrostatic restoring moment to effectively predict the dynamics of the wave energy converter. For operation of the device with a passively damping......-linear effect is investigated by a simplified formulation proportional to the quadratic velocity. Results from experiments are shown in order to validate the numerical calculations. All the experimental results are in good agreement with the linear potential theory as long as the waves are sufficiently mild i...

  8. 3D Tests on Overtopping for SSG Wave Energy Converter

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Kofoed, Jens Peter

    This report presents the results of the first study based on laboratory tests of the behaviour of the SSG pilot module in 3D wave conditions. This study was recommended already during Phase 2 of the Co-operation agreement between WEVEnergy AS (Norway) and Aalborg University, Department of Civil...

  9. Numerical Modeling and Experimental Testing of a Wave Energy Converter

    DEFF Research Database (Denmark)

    Zurkinden, Andrew Stephen; Kramer, Morten; Ferri, Francesco

    numerical values for comparison with the experimental test results which were carried out in the same time. It is for this reason why Chapter 4 does consist exclusively of numerical values. Experimental values and measured time series of wave elevations have been used throughout the report in order to a...

  10. Energy dissipation in breaking solitary and periodic waves

    NARCIS (Netherlands)

    Battjes, J.A.

    1986-01-01

    It is well known (see Divoky et al., 1970, for a review) that on gentle slopes (slope S < 1:30, say) the wave height after breaking does not decay in proportion to the mean depth. The curve H/Hb vs h/hb is concave upwards (for plane bottom). The concavity increases with decreasing S and with

  11. A SYSTEM TO MAKE USE OF EXISTING BREAKWATERS AS OVERTOPPING WAVE ENERGY CONVERTERS

    Directory of Open Access Journals (Sweden)

    DENIZ ÜNSALAN

    2016-06-01

    Full Text Available The main purpose of building breakwaters is to produce safe havens for ships and boats in rough seas. The general architecture for a breakwater is a wall with a trapezoidal -shaped cross section extending parallel to the shoreline. As the waves from the open sea approach, they are encountered by the so- called slope and revetment of the breakwater, where the wave is broken and its energy is dissipated and/or reflected back. However, the ever -increasing attractiveness of the utilization of waves as energy sources, paralleling to the increasing monetary and envir onmental costs of energy, has led the authors to consider the vast amounts of this otherwise dissipated energy into useful electrical energy. A wave energy conversion concept, which can be classified as an “overtopping” wave energy converter was conceived, where the open sea-facing (revetment side of the breakwater is fitted by a water collecting channel at a suitable height above the calm water level, running alongside the breakwater. The channel leads the collected water to a powerhouse containing a low head turbine (or a set of such turbines discharging it to the calm water of the inner harbour. Power obtained from these turbines can be converted to electrical energy. In this study, an estimation of the volume of water collected by the channel and the energy production for a proposed breakwater - power station system for a typical rough weather shall be made. It is deemed that the feasibility of this system is comparable to and even higher than the other wave energy conversion systems since it does not require additional facilities and power supply lines to be built due to its proximity to the existing energy transmission lines, except for the addition of new features/installations to the existing breakwaters.

  12. Mapping and Assessment of the United States Ocean Wave Energy Resource

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, Paul T; Hagerman, George; Scott, George

    2011-12-01

    This project estimates the naturally available and technically recoverable U.S. wave energy resources, using a 51-month Wavewatch III hindcast database developed especially for this study by National Oceanographic and Atmospheric Administration's (NOAA's) National Centers for Environmental Prediction. For total resource estimation, wave power density in terms of kilowatts per meter is aggregated across a unit diameter circle. This approach is fully consistent with accepted global practice and includes the resource made available by the lateral transfer of wave energy along wave crests, which enables wave diffraction to substantially reestablish wave power densities within a few kilometers of a linear array, even for fixed terminator devices. The total available wave energy resource along the U.S. continental shelf edge, based on accumulating unit circle wave power densities, is estimated to be 2,640 TWh/yr, broken down as follows: 590 TWh/yr for the West Coast, 240 TWh/yr for the East Coast, 80 TWh/yr for the Gulf of Mexico, 1570 TWh/yr for Alaska, 130 TWh/yr for Hawaii, and 30 TWh/yr for Puerto Rico. The total recoverable wave energy resource, as constrained by an array capacity packing density of 15 megawatts per kilometer of coastline, with a 100-fold operating range between threshold and maximum operating conditions in terms of input wave power density available to such arrays, yields a total recoverable resource along the U.S. continental shelf edge of 1,170 TWh/yr, broken down as follows: 250 TWh/yr for the West Coast, 160 TWh/yr for the East Coast, 60 TWh/yr for the Gulf of Mexico, 620 TWh/yr for Alaska, 80 TWh/yr for Hawaii, and 20 TWh/yr for Puerto Rico.

  13. Analysis of Wave Reflection from Wave Energy Converters Installed as Breakwaters in Harbour

    DEFF Research Database (Denmark)

    Zanuttigh, B.; Margheritini, Lucia; Gambles, L.

    2009-01-01

    loads on the structure, i.e. better survivability. Nevertheless these devices must comply with the requirements of harbour protection structures and thus cope with problems due to reflection of incoming waves, i.e. dangerous sea states close to harbors entrances and intensified sediment scour, which can...... lead to structure destabilization. The present paper aims to analyse wave reflection from OWC and Sea Slot-cone Generator (SSG) converters, based on experimental results obtained in 2D and 3D facilities. The applicability of formulae available in the literature and derived from costal structures...

  14. Electrical design for ocean wave and tidal energy systems

    CERN Document Server

    Alcorn, Raymond

    2013-01-01

    Provides an electrical engineering perspective on offshore power stations and their integration to the grid. With contributions from a panel of leading international experts, this book is essential reading for those working in ocean energy development and renewable energy.

  15. Hypersonic wave drag reduction performance of cylinders with repetitive laser energy depositions

    Energy Technology Data Exchange (ETDEWEB)

    Fang, J; Hong, Y J; Li, Q; Huang, H, E-mail: fangjuan314@163.com [Academy of Equipment Command and Technology, Post Box 3380-86, Huairou Dis. Beijing 101416 (China)

    2011-02-01

    It has been widely research that wave drag reduction on hypersonic vehicle by laser energy depositions. Using laser energy to reduce wave drag can improve vehicle performance. A second order accurate scheme based on finite-difference method and domain decomposition of structural grid is used to compute the drag performance of cylinders in a hypersonic flow of Mach number 2 at altitude of 15km with repetitive energy depositions. The effects of frequency on drag reduction are studied. The calculated results show: the recirculation zone is generated due to the interaction between bow shock over the cylinder and blast wave produced by energy deposition, and a virtual spike which is supported by an axis-symmetric recirculation, is formed in front of the cylinder. By increasing the repetitive frequency, the drag is reduced and the oscillation of the drag is decreased; however, the energy efficiency decreases by increasing the frequency.

  16. Energy Relations for Plane Waves Reflected from Moving Media

    DEFF Research Database (Denmark)

    Daly, P.; Gruenberg, Harry

    1967-01-01

    there is a net inflow or outflow of electromagnetic energy, which can be accounted for by the change of stored energy in the system, and the work done by the mechanical forces acting on the medium. A detailed energy balance is drawn up for two different media moving normal to their vacuum interfaces: (a...

  17. Mathematical Modeling of Oscillating Water Columns Wave-Structure Interaction in Ocean Energy Plants

    Directory of Open Access Journals (Sweden)

    Aitor J. Garrido

    2015-01-01

    Full Text Available Oscillating Water Column (OWC-based power take-off systems are one of the potential solutions to the current energy problems arising from the use of nuclear fission and the consumption of fossil fuels. This kind of energy converter turns wave energy into electric power by means of three different stages: firstly wave energy is transformed into pneumatic energy in the OWC chamber, and then a turbine turns it into mechanical energy and finally the turbogenerator module attached to the turbine creates electric power from the rotational mechanical energy. To date, capture chambers have been the least studied part. In this context, this paper presents an analytical model describing the dynamic behavior of the capture chamber, encompassing the wave motion and its interaction with the OWC structure and turbogenerator module. The model is tested for the case of the Mutriku wave power plant by means of experimental results. For this purpose, representative case studies are selected from wave and pressure drop input-output data. The results show an excellent matching rate between the values predicted by the model and the experimental measured data with a small bounded error in all cases, so that the validity of the proposed model is proven.

  18. Potential to kinetic energy conversion in wave number domain for the Southern Hemisphere

    Science.gov (United States)

    Huang, H.-J.; Vincent, D. G.

    1984-01-01

    Preliminary results of a wave number study conducted for the South Pacific Convergence Zone (SPCZ) using FGGE data for the period January 10-27, 1979 are reported. In particular, three variables (geomagnetic height, z, vertical p-velocity, omega, and temperature, T) and one energy conversion quantity, omega-alpha (where alpha is the specific volume), are shown. It is demonstrated that wave number 4 plays an important role in the conversion from available potential energy to kinetic energy in the Southern Hemisphere tropics, particularly in the vicinity of the SPCZ. It is therefore suggested that the development and movement of wave number 4 waves be carefully monitored in making forecasts for the South Pacific region.

  19. Experimental and Theoretical Analysis of a Combined Floating Wave and Wind Energy Conversion Platform

    DEFF Research Database (Denmark)

    Yde, Anders; Pedersen, Mads Mølgaard; Bellew, Sarah Bellew

    This report presents results from the PSO project 2011-1-10668 entitled Poseidon 2. The project is a continuation of the previous PSO project entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines. Floating Power Plant has developed the technology...... for a novel, floating, wave- and wind-energy hybrid device. To test the technology they have scaled the design to P37, a 37 m wide test platform that has been undergoing offshore testing for four complete test phases (totaling more than 2 years). The test platform provides electricity to the grid from both...... wind and wave energy, however its purpose is purely for research and development. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the test periods has been used for evaluating...

  20. Final Report Feasibility Study for the California Wave Energy Test Center (CalWavesm)

    Energy Technology Data Exchange (ETDEWEB)

    Blakeslee, Samuel Norman [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Inst. for Advanced Technology and Public Policy; Toman, William I. [Protean Wave Energy Ltd., Los Osos, CA (United States); Williams, Richard B. [Leidos Maritime Solutions, Reston, VA (United States); Davy, Douglas M. [CH2M, Sacramento, CA (United States); West, Anna [Kearns and West, Inc., San Francisco, CA (United States); Connet, Randy M. [Omega Power Engineers, LLC, Anaheim, CA (United States); Thompson, Janet [Kearns and West, Inc., San Francisco, CA (United States); Dolan, Dale [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Baltimore, Craig [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Jacobson, Paul [Electric Power Research Inst. (EPRI), Knoxville, TN (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Potter, Chris [California Natural Resources Agency, Sacramento, CA (United States); Dooher, Brendan [Pacific Gas and Electric Company, San Francisco, CA (United States); Wendt, Dean [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Sheppard, Colin [Humboldt State Univ., Arcata, CA (United States); Harris, Andrew [Humboldt State Univ., Arcata, CA (United States); Lawson, W. Graham [Power Delivery Consultants, Inc., Albany, NY (United States)

    2017-07-31

    The California Wave Energy Test Center (CalWave) Feasibility Study project was funded over multiple phases by the Department of Energy to perform an interdisciplinary feasibility assessment to analyze the engineering, permitting, and stakeholder requirements to establish an open water, fully energetic, grid connected, wave energy test center off the coast of California for the purposes of advancing U.S. wave energy research, development, and testing capabilities. Work under this grant included wave energy resource characterization, grid impact and interconnection requirements, port infrastructure and maritime industry capability/suitability to accommodate the industry at research, demonstration and commercial scale, and macro and micro siting considerations. CalWave Phase I performed a macro-siting and down-selection process focusing on two potential test sites in California: Humboldt Bay and Vandenberg Air Force Base. This work resulted in the Vandenberg Air Force Base site being chosen as the most favorable site based on a peer reviewed criteria matrix. CalWave Phase II focused on four siting location alternatives along the Vandenberg Air Force Base coastline and culminated with a final siting down-selection. Key outcomes from this work include completion of preliminary engineering and systems integration work, a robust turnkey cost estimate, shoreside and subsea hazards assessment, storm wave analysis, lessons learned reports from several maritime disciplines, test center benchmarking as compared to existing international test sites, analysis of existing applicable environmental literature, the completion of a preliminary regulatory, permitting and licensing roadmap, robust interaction and engagement with state and federal regulatory agency personnel and local stakeholders, and the population of a Draft Federal Energy Regulatory Commission (FERC) Preliminary Application Document (PAD). Analysis of existing offshore oil and gas infrastructure was also performed

  1. L’adjectif dans la désignation des énergies marines renouvelables

    Directory of Open Access Journals (Sweden)

    Bonadonna Maria Francesca

    2016-01-01

    Full Text Available Cet article propose une description de l’adjectif dans le domaine des énergies marines renouvelables. Il s’inscrit dans le cadre des méthodes exploitant le système des fonctions lexicales dans la structuration des terminologies. Premièrement, un aperçu est donné sur les recherches autour de la terminologie des énergies renouvelables et sur l’adjectif. En deuxième lieu, nous menons une analyse sémantique de quelques adjectifs employés dans les unités terminologiques qui se réfèrent aux principaux types d’énergies marines renouvelables. Dans ce but, un corpus de textes publiés entre 2004 et 2015 est constitué à partir de deux genres textuels différents, le discours institutionnel et le discours scientifique, et soumis au logiciel TermoStat. Le filtrage des résultats obtenus par cet extracteur donne un échantillon de termes – ici appelés lexies spécialisées – dont la tête est représentée par énergie/énergies et qui désignent des sources énergétiques liées à l’eau. Si l’étude du sémantisme propre aux adjectifs, et de leurs relations sémantiques réciproques, fait l’objet d’une première description au moyen des fonctions lexicales, c’est l’emploi dans les lexies spécialisées qui est ensuite analysé. Cela permet de décrire leurs sens respectifs et leur positionnement sémantique à l’intérieur d’une terminologie relativement récente, dont une systématisation est souhaitable.

  2. Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys

    Science.gov (United States)

    Murray, R.; Rastegar, J.

    2009-03-01

    Harvesting mechanical energy from ocean wave oscillations for conversion to electrical energy has long been pursued as an alternative or self-contained power source. The attraction to harvesting energy from ocean waves stems from the sheer power of the wave motion, which can easily exceed 50 kW per meter of wave front. The principal barrier to harvesting this power is the very low and varying frequency of ocean waves, which generally vary from 0.1Hz to 0.5Hz. In this paper the application of a novel class of two-stage electrical energy generators to buoyant structures is presented. The generators use the buoy's interaction with the ocean waves as a low-speed input to a primary system, which, in turn, successively excites an array of vibratory elements (secondary system) into resonance - like a musician strumming a guitar. The key advantage of the present system is that by having two decoupled systems, the low frequency and highly varying buoy motion is converted into constant and much higher frequency mechanical vibrations. Electrical energy may then be harvested from the vibrating elements of the secondary system with high efficiency using piezoelectric elements. The operating principles of the novel two-stage technique are presented, including analytical formulations describing the transfer of energy between the two systems. Also, prototypical design examples are offered, as well as an in-depth computer simulation of a prototypical heaving-based wave energy harvester which generates electrical energy from the up-and-down motion of a buoy riding on the ocean's surface.

  3. Balancing Power Absorption and Fatigue Loads in Irregular Waves for an Oscillating Surge Wave Energy Converter: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Tom, Nathan M.; Yu, Yi-Hsiang; Wright, Alan D.; Lawson, Michael

    2016-06-01

    The aim of this paper is to describe how to control the power-to-load ratio of a novel wave energy converter (WEC) in irregular waves. The novel WEC that is being developed at the National Renewable Energy Laboratory combines an oscillating surge wave energy converter (OSWEC) with control surfaces as part of the structure; however, this work only considers one fixed geometric configuration. This work extends the optimal control problem so as to not solely maximize the time-averaged power, but to also consider the power-take-off (PTO) torque and foundation forces that arise because of WEC motion. The objective function of the controller will include competing terms that force the controller to balance power capture with structural loading. Separate penalty weights were placed on the surge-foundation force and PTO torque magnitude, which allows the controller to be tuned to emphasize either power absorption or load shedding. Results of this study found that, with proper selection of penalty weights, gains in time-averaged power would exceed the gains in structural loading while minimizing the reactive power requirement.

  4. Optimal Control Of Nonlinear Wave Energy Point Converters

    DEFF Research Database (Denmark)

    Nielsen, Søren R.K.; Zhou, Qiang; Kramer, Morten

    2013-01-01

    In this paper the optimal control law for a single nonlinear point absorber in irregular sea-states is derived, and proven to be a closed-loop controller with feedback from measured displacement, velocity and acceleration of the floater. However, a non-causal integral control component dependent...... on future velocities appears in the optimal control law, rendering the optimal control law less useful for real time implementation. To circumvent this problem a causal closed-loop controller with the same feedback information is proposed, based on a slight modification of the optimal control law. The basic...... idea behind the control strategy is to enforce the stationary velocity response of the absorber into phase with the wave excitation force at any time. The controller is optimal under monochromatic wave excitation. It is demonstrated that the devised causal controller, in plane irregular sea states...

  5. Gravitational Wave Sirens as a Triple Probe of Dark Energy

    OpenAIRE

    Linder, Eric V.

    2007-01-01

    Gravitational wave standard sirens have been considered as precision distance indicators to high redshift; however, at high redshift standard sirens or standard candles such as supernovae suffer from lensing noise. We investigate lensing noise as a signal instead and show how measurements of the maximum demagnification (minimum convergence) probe cosmology in a highly complementary manner to the distance itself. Revisiting the original form for minimum convergence we quantify the bias arising...

  6. 3D-printed lens for structure-borne wave focusing and energy harvesting

    Science.gov (United States)

    Tol, S.; Degertekin, F. L.; Erturk, A.

    2017-04-01

    In this paper, we explore 3D-printed Gradient-Index Phononic Crystal Lens (GRIN-PCL) for structure-borne focusing both numerically and experimentally. The proposed lens consists of an array of nylon stubs with different heights which is fabricated by 3D printing the PA2200 nylon. The orientation and height of the stubs are determined according to the hyperbolic secant gradient distribution of refractive index which is guided by finite-element simulations of the lowest asymmetric mode Lamb wave band diagrams. The fabricated lens is then bonded to an aluminum plate to focus the wave energy in the structure. The wave focusing performance is simulated in COMSOL Multiphysics® under plane wave excitation from a line source indicating that the focal points are consistent with the analytical beam trajectory results. Experiments are conducted with a scanning laser vibrometer and experimentally measured wave field successfully validates the numerical simulation of wave focusing within the 3D-printed GRIN-PCL domain. With a piezoelectric energy harvester disk located at the focal region of the GRIN-PCL larger power output is obtained as compared to the baseline case of energy harvesting without the GRIN-PCL on the uniform plate counterpart for the same incident plane wave excitation.

  7. Les énergies renouvelables au fil des siècles

    OpenAIRE

    Hladik, Jean; Hladik, Claude Marcel

    2011-01-01

    Il nous faut remonter dans l'histoire de l'humanité vers des périodes beaucoup plus lointaines que celles des moulins à vent, de la fusion et de la forge des métaux ou même de la découverte et de l'utilisation des premiers récipients de terre cuite, pour comprendre le rôle des énergies fossiles ou renouvelables. Ce rôle ne se limite pas au développement des techniques car il apparaît comme une contribution essentielle à l'émergence des être humains, dans le cadre des seules théories actuelles...

  8. Stochastic Rating of Storage Systems in Isolated Networks with Increasing Wave Energy Penetration

    Directory of Open Access Journals (Sweden)

    Elisabetta Tedeschi

    2013-05-01

    Full Text Available The future success of wave energy in the renewable energy mix depends on the technical advancements of the specific components and systems, on the grid access availability and, ultimately, on the economical profitability of the investment. Small and remote islands represent an ideal framework for wave energy exploitation, due both to resource availability and to the current high cost of electricity that mostly relies on diesel generation. Energy storage can be the enabling technology to match the intermittent power generation from waves to the energy needs of the local community. In this paper real data from La Palma, in the Canary Islands, are used as a basis for the considered test case. As a first step the study quantifies the expected power production from Wave Energy Converter (WEC arrays, based on data from the Lifesaver point absorber developed by Fred. Olsen. Then, a stochastic optimization approach is applied to evaluate the convenience of energy storage introduction for reducing the final cost of energy and to define the corresponding optimal rating of the storage devices.

  9. Variations of wave energy power in shoaling zone of Benin coastal zone

    Directory of Open Access Journals (Sweden)

    Mathias A. Houekpoheha

    2015-02-01

    Full Text Available Today, we observe at the population level, that the improvement in comfort is accompanied by an increase in the electrical energy required. The predicted exhaustion of fossil energy resources maintains some speculation. Their unequal geographical distribution justifies the energy dependence of Benin overlooked from outside. So it is urgent to explore the various sources of renewable energy available to Benin. In this work, using measurements made ​​by the Millennium Challenge Account (MCA-Benin as part of the extension of the port of Cotonou, with Boussinesq equations (Peregrine and Stokes waves dispersion relation, we characterized the variations of various swell parameters (height, wavelength, velocities in the shoaling zone on the study site and proceeded to estimate variations in wave energy power from deep waters to the bathymetric breaking point. Finally, the zone with high energy power (where the conversion of this energy into electrical energy would be profitable of these waves is highlighted on the site, the local water depth at the point of breaking waves is evaluated and results obtained allowed to justify the very energetic character take by these swells on this coast when they are close to the beach.

  10. Electronic energy band parameters of CsCl evaluated on core Bloch states and plane waves

    Energy Technology Data Exchange (ETDEWEB)

    Syrotyuk, S.V. [Semiconductor Electronics Department, National University ' Lviv Polytechnic' , S. Bandera str. 12, Lviv 79013 (Ukraine); Chornodolskyy, Ya.M. [Physics Department, Ivan Franko National University of Lviv, Kyryla i Mefodiya str. 8, Lviv 79005 (Ukraine)], E-mail: chornodolsky@ukr.net; Stryganyuk, G.B. [HASYLAB at DESY, Notkestr. 85, Hamburg 22607 (Germany); Voloshinovskii, A.S. [Physics Department, Ivan Franko National University of Lviv, Kyryla i Mefodiya str. 8, Lviv 79005 (Ukraine); Rodnyi, P.A. [St. Petersburg State Polytechnical University, Polytekhnicheskaya 29, St. Petersburg 195251 (Russian Federation)

    2007-04-15

    Electronic energy bands of CsCl crystal have been calculated within the mixed basis approach with using the core Bloch states and plane waves. The calculated energy parameters of the crystal are in the satisfactory agreement with the experimental data obtained from the analysis of the core-valence luminescence spectra. The obtained results form a base for calculation of CVL spectra parameters.

  11. Revenue Optimization for the Ocean Grazer Wave Energy Converter through Storage Utilization

    NARCIS (Netherlands)

    Dijkstra, H.T.; Barradas Berglind, J.J.; Meijer, H.; van Rooij, Marijn; Prins, W.A.; Vakis, A. I.; Jayawardhana, B.

    2016-01-01

    Increased penetration of renewable energy generation motivates a change of paradigm in the way power systems are structured and operated, as advocated by the smart grid concept. Accordingly, in this paper we investigate the lossless storage capabilities of the Ocean Grazer wave energy converter

  12. The impulsive effects of momentum transfer on the dynamics of a novel ocean wave energy converter

    Science.gov (United States)

    Diamond, Christopher A.; O'Reilly, Oliver M.; Savaş, Ömer

    2013-10-01

    In a recent paper by Orazov et al. [On the dynamics of a novel ocean wave energy converter. Journal of Sound and Vibration329 (24) (2010) 5058-5069], a wave energy converter (WEC) was proposed. The converter features a mass modulation scheme and a simple model was used to examine its efficacy. The simple model did not adequately account for the momentum transfer which takes place during the mass modulation. The purpose of the present paper is to account for this transfer and to show that the WEC equipped with a novel and more general mass modulation scheme has the potential to improve its energy harvesting capabilities.

  13. Integration of Wave and Offshore Wind Energy in a European Offshore Grid

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez; Sørensen, H. C.; Korpås, M.

    2010-01-01

    High wave and offshore wind energy potentials are located along the West and North coasts of Europe, respectively. In the near future, these resources should significantly contribute to the European electricity mix, but there is hardly any grid infrastructure available for large scale integration...... of offshore renewable energy sources. According to this, the paper covers i) public and private initiatives for offshore transmission networks, ii) the synergies between the wave and the offshore wind energy sector within an offshore grid, iii) power transmission options for offshore generation and iv...

  14. User guide - COE calculation tool for wave energy converters. Draft version 1

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Chozas, J.; Kofoed, J.P. [Aalborg Univ., Aalborg (Denmark); Helstrup Jensen, N.E. [Energinet.dk, Fredericia (Denmark)

    2013-08-15

    Aalborg University together with Energinet.dk and Julia F. Chozas Consulting Engineer, have released a freely available online spreadsheet to evaluate the Levelised Cost of Energy (LCOE) for wave energy projects. The open-access tool calculates the LCOE based on the power production of a Wave Energy Converter (WEC) at a particular location. Production data may derive from laboratory testing, numerical modelling or from sea trials. The tool has been developed as a transparent and simple model that evaluates WEC's economic feasibility in a range of locations, while scaling WEC's features to the selected site. (Author)

  15. Can cellulite be treated with low-energy extracorporeal shock wave therapy?

    Science.gov (United States)

    Angehrn, Fiorenzo; Kuhn, Christoph; Voss, Axel

    2007-01-01

    The present study investigates the effects of low-energy defocused extracorporeal generated shock waves on collagen structure of cellulite afflicted skin. Cellulite measurement using high-resolution ultrasound technology was performed before and after low-energy defocused extracorporeal shock wave therapy (ESWT) in 21 female subjects. ESWT was applied onto the skin at the lateral thigh twice a week for a period of six weeks. Results provide evidence that low-energy defocused ESWT caused remodeling of the collagen within the dermis of the tested region. Improving device-parameters and therapy regimes will be essential for future development of a scientific based approach to cellulite treatment. PMID:18225463

  16. Screening of Available Tools for Dynamic Mooring Analysis of Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2017-01-01

    The focus on alternative energy sources has increased significantly throughout the last few decades, leading to a considerable development in the wave energy sector. In spite of this, the sector cannot yet be considered commercialized, and many challenges still exist, in which mooring of floating...... wave energy converters is included. Different methods for assessment and design of mooring systems have been described by now, covering simple quasi-static analysis and more advanced and sophisticated dynamic analysis. Design standards for mooring systems already exist, and new ones are being developed...

  17. Study on the Performance of the “Pendulor” Wave Energy Converter in an Array Configuration

    Directory of Open Access Journals (Sweden)

    Sudath Prasanna Gunawardane

    2016-04-01

    Full Text Available For over three decades the “Pendulor” wave energy device has had a significant influence in this field, triggering several research endeavours. It includes a top-hinged flap propelled by the standing waves produced in a caisson with a back wall on the leeward side. However, one of the main disadvantages which impedes its progress is the enormous expense involved in the construction of the custom made typical caisson structure, about a little more than one-quarter of the wave length. In this study, the influence of such design parameters on the performance of the device is investigated, via numerical modelling for a device arranged in an array configuration, for irregular waves. The potential wave theory is applied to derive the frequency-dependent hydrodynamic parameters by making a distinction in the fluid domain into a separate sea side and lee side. The Cummins equation was utilised for the development of the time domain equation of motion while the transfer function estimation methods were used to solve the convolution integrals. Finally, the device was tested numerically for irregular wave conditions for a 50 kW class unit. It was observed that in irregular wave operating conditions, the caisson chamber length could be reduced by 40% of the value estimated for the regular waves. Besides, the device demonstrated around 80% capture efficiency for irregular waves thus allowing provision for avoiding the employment of any active control.

  18. MAGNETOHYDRODYNAMIC KINK WAVES IN NONUNIFORM SOLAR FLUX TUBES: PHASE MIXING AND ENERGY CASCADE TO SMALL SCALES

    Energy Technology Data Exchange (ETDEWEB)

    Soler, Roberto; Terradas, Jaume, E-mail: roberto.soler@uib.es [Departament de Física, Universitat de les Illes Balears, E-07122, Palma de Mallorca (Spain)

    2015-04-10

    Magnetohydrodynamic (MHD) kink waves are ubiquitously observed in the solar atmosphere. The propagation and damping of these waves may play relevant roles in the transport and dissipation of energy in the solar atmospheric medium. However, in the atmospheric plasma dissipation of transverse MHD wave energy by viscosity or resistivity needs very small spatial scales to be efficient. Here, we theoretically investigate the generation of small scales in nonuniform solar magnetic flux tubes due to phase mixing of MHD kink waves. We go beyond the usual approach based on the existence of a global quasi-mode that is damped in time due to resonant absorption. Instead, we use a modal expansion to express the MHD kink wave as a superposition of Alfvén continuum modes that are phase mixed as time evolves. The comparison of the two techniques evidences that the modal analysis is more physically transparent and describes both the damping of global kink motions and the building up of small scales due to phase mixing. In addition, we discuss that the processes of resonant absorption and phase mixing are closely linked. They represent two aspects of the same underlying physical mechanism: the energy cascade from large scales to small scales due to naturally occurring plasma and/or magnetic field inhomogeneities. This process may provide the necessary scenario for efficient dissipation of transverse MHD wave energy in the solar atmospheric plasma.

  19. Optimal Configurations of Wave Energy Converter Arrays with a Floating Body

    Directory of Open Access Journals (Sweden)

    Zhang Wanchao

    2016-10-01

    Full Text Available An array of floating point-absorbing wave energy converters (WECs is usually employed for extracting efficiently ocean wave energy. For deep water environment, it is more feasible and convenient to connect the absorbers array with a floating body, such as a semi-submersible bottom-moored disk, whose function is to act as the virtual seabed. In the present work, an array of identical floating symmetrically distributed cylinders in a coaxial moored disk as a wave energy device is proposed The power take-off (PTO system in the wave energy device is assumed to be composed of a linear/nonlinear damper activated by the buoys heaving motion. Hydrodynamic analysis of the examined floating system is implemented in frequency domain. Hydrodynamic interferences between the oscillating bodies are accounted for in the corresponding coupled equations. The array layouts under the constraint of the disk, incidence wave directions, separating distance between the absorbers and the PTO damping are considered to optimize this kind of WECs. Numerical results with regular waves are presented and discussed for the axisymmetric system utilizing heave mode with these interaction factors, in terms of a specific numbers of cylinders and expected power production.

  20. Impact of Cold Waves and Heat Waves on the Energy Production Sector

    Directory of Open Access Journals (Sweden)

    Juan A. Añel

    2017-10-01

    Full Text Available Cold and heat waves represent a significant problem for the electricity generation sector. The disruptions cold and heat waves can cause in power production are beyond their consumption impacts through, for instance, higher peak demand. Unexpected stops at thermal or nuclear power plants by excessively high-temperature water constitute clear examples of this. In this invited paper, we use past case studies to analyze the impact of these kinds of events on power production. Subsequently we discuss how events of this nature may evolve over the future in view of their association to climate change. Although the review is not exhaustive, we do expose some ideas that may be relevant for decision making in this area