Hietala, Vincent M.; Vawter, Gregory A.
1993-01-01
The traveling-wave photodetector of the present invention combines an absorptive optical waveguide and an electrical transmission line, in which optical absorption in the waveguide results in a photocurrent at the electrodes of the electrical transmission line. The optical waveguide and electrical transmission line of the electrically distributed traveling-wave photodetector are designed to achieve matched velocities between the light in the optical waveguide and electrical signal generated on the transmission line. This velocity synchronization provides the traveling-wave photodetector with a large electrical bandwidth and a high quantum efficiency, because of the effective extended volume for optical absorption. The traveling-wave photodetector also provides large power dissipation, because of its large physical size.
Traveling-Wave Membrane Photomixers
Wyss, R. A.; Martin, S. C.; Nakamura, B. J.; Neto, A.; Pasqualini, D.; Siegel, P. H.; Kadow, C.; Gossard, A. C.
2001-01-01
Traveling-wave photomixers have superior performance when compared with lumped area photomixers in the 1 to 3 THz frequency range. Their large active area and distributed gain mechanism assure high thermal damage threshold and elimination of the capacitive frequency roll-off. However, the losses experienced by the radio frequency wave traveling along the coplanar strips waveguide (due to underlying semi-infinite GaAs substrate) were a serious drawback. In this paper we present device designs and an experimental setup that make possible the realization of photomixers on membranes which eliminate the losses.
Sequentially pulsed traveling wave accelerator
Caporaso, George J [Livermore, CA; Nelson, Scott D [Patterson, CA; Poole, Brian R [Tracy, CA
2009-08-18
A sequentially pulsed traveling wave compact accelerator having two or more pulse forming lines each with a switch for producing a short acceleration pulse along a short length of a beam tube, and a trigger mechanism for sequentially triggering the switches so that a traveling axial electric field is produced along the beam tube in synchronism with an axially traversing pulsed beam of charged particles to serially impart energy to the particle beam.
Parametric form of QCD travelling waves
Peschanski, R.
2005-01-01
We derive parametric travelling-wave solutions of non-linear QCD equations. They describe the evolution towards saturation in the geometric scaling region. The method, based on an expansion in the inverse of the wave velocity, leads to a solvable hierarchy of differential equations. A universal parametric form of travelling waves emerges from the first two orders of the expansion.
New exact travelling wave solutions of bidirectional wave equations
Indian Academy of Sciences (India)
where , , and d are real constants. In general, the exact travelling wave solutions will be helpful in the theoretical and numerical study of the nonlinear evolution systems. In this paper, we obtain exact travelling wave solutions of system (1) using the modiﬁed tanh–coth function method with computerized symbolic ...
Geyer, Anna
2016-01-01
Following a general principle introduced by Ehrnstr\\"{o}m et.al. we prove that for an equation modeling the free surface evolution of moderate amplitude waves in shallow water, all symmetric waves are traveling waves.
Periodic Traveling Waves in Diatomic Granular Chains
Betti, Matthew; Pelinovsky, Dmitry E.
2013-10-01
We study bifurcations of periodic traveling waves in diatomic granular chains from the anti-continuum limit, when the mass ratio between the light and heavy beads is zero. We show that every limiting periodic wave is uniquely continued with respect to the mass ratio parameter, and the periodic waves with a wavelength larger than a certain critical value are spectrally stable. Numerical computations are developed to study how this solution family is continued to the limit of equal mass ratio between the beads, where periodic traveling waves of homogeneous granular chains exist.
Travelling waves in the lattice epidemic model
Directory of Open Access Journals (Sweden)
Zhixian Yu
2010-07-01
Full Text Available In this article, we establish the existence and nonexistence of travelling waves for a lattice non-monotone integral equation which is an epidemic model. Moreover, the wave is either convergent to the positive equilibrium or oscillating on the positive equilibrium at positive infinity, and has the exponential asymptotic behavior at negative infinity. For the non-monotone case, the asymptotic speed of propagation also coincides with the minimal wave speed.
Guided wave travel time tomography for bends
Volker, A.W.F.; Bloom, J.G.P.
2010-01-01
The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections. Guided wave tomography has been developed to map the wall thickness using the travel times of guided waves. The method
Guided Wave Travel Time Tomography for Bends
Volker, A.W.F.; Zon, A.T. van
2012-01-01
The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections. Guided wave tomography has been developed to map the wall thickness using the travel times of guided waves. The method
Traveling wave tube and method of manufacture
Vancil, Bernard K. (Inventor)
2004-01-01
A traveling wave tube includes a glass or other insulating envelope having a plurality of substantially parallel glass rods supported therewithin which in turn support an electron gun, a collector and an intermediate slow wave structure. The slow wave structure itself provides electrostatic focussing of a central electron beam thereby eliminating the need for focussing magnetics and materially decreasing the cost of construction as well as enabling miniaturization. The slow wave structure advantageously includes cavities along the electron beam through which the r.f. energy is propagated, or a double, interleaved ring loop structure supported by dielectric fins within a ground plane cylinder disposed coaxially within the glass envelope.
Travelling waves in hybrid chemotaxis models
Franz, Benjamin; Painter, Kevin J; Erban, Radek
2013-01-01
Hybrid models of chemotaxis combine agent-based models of cells with partial differential equation models of extracellular chemical signals. In this paper, travelling wave properties of hybrid models of bacterial chemotaxis are investigated. Bacteria are modelled using an agent-based (individual-based) approach with internal dynamics describing signal transduction. In addition to the chemotactic behaviour of the bacteria, the individual-based model also includes cell proliferation and death. Cells consume the extracellular nutrient field (chemoattractant) which is modelled using a partial differential equation. Mesoscopic and macroscopic equations representing the behaviour of the hybrid model are derived and the existence of travelling wave solutions for these models is established. It is shown that cell proliferation is necessary for the existence of non-transient (stationary) travelling waves in hybrid models. Additionally, a numerical comparison between the wave speeds of the continuum models and the hybr...
Traveling Theta Waves in the Human Hippocampus
Zhang, Honghui
2015-01-01
The hippocampal theta oscillation is strongly correlated with behaviors such as memory and spatial navigation, but we do not understand its specific functional role. One hint of theta's function came from the discovery in rodents that theta oscillations are traveling waves that allow parts of the hippocampus to simultaneously exhibit separate oscillatory phases. Because hippocampal theta oscillations in humans have different properties compared with rodents, we examined these signals directly using multielectrode recordings from neurosurgical patients. Our findings confirm that human hippocampal theta oscillations are traveling waves, but also show that these oscillations appear at a broader range of frequencies compared with rodents. Human traveling waves showed a distinctive pattern of spatial propagation such that there is a consistent phase spread across the hippocampus regardless of the oscillations' frequency. This suggests that traveling theta oscillations are important functionally in humans because they coordinate phase coding throughout the hippocampus in a consistent manner. SIGNIFICANCE STATEMENT We show for the first time in humans that hippocampal theta oscillations are traveling waves, moving along the length of the hippocampus in a posterior–anterior direction. The existence of these traveling theta waves is important for understanding hippocampal neural coding because they cause neurons at separate positions in the hippocampus to experience different theta phases simultaneously. The theta phase that a neuron measures is a key factor in how that cell represents behavioral information. Therefore, the existence of traveling theta waves indicates that, to fully understand how a hippocampal neuron represents information, it is vital to also account for that cell's location in addition to conventional measures of neural activity. PMID:26354915
Backward Wave Oscillation Thresholds in a Traveling-Wave Tube
Jassem, Abhijit; Wong, Patrick; Antoulinakis, Foivos; Lau, Y. Y.
2017-10-01
The threshold for the onset of backward wave oscillation (BWO) in a traveling-wave tube (TWT) was formulated by Johnson. In this paper, we extend Johnson's model to include random variations of circuit phase velocity along the tube axis. We find that Johnson's BWO threshold is minimally affected by these random variations. We next ignore these random variations, but include finite reflections at the two ends of a TWT and study their effects on Johnson's threshold. The latter theory is developed and being compared with results from an experimental helix test circuit. We will explore a 4-wave treatment for BWO, and its connection with the Briggs-Bers criterion for the existence of absolute instability. Work supported by DARPA, contract HR0011-16-C-0080 with Leidos, Inc., AFOSR Awards Nos. FA9550-15-1-0097, FA9550-14-1-0309, and L-3 Communications.
Travelling Waves in Hybrid Chemotaxis Models
Franz, Benjamin
2013-12-18
Hybrid models of chemotaxis combine agent-based models of cells with partial differential equation models of extracellular chemical signals. In this paper, travelling wave properties of hybrid models of bacterial chemotaxis are investigated. Bacteria are modelled using an agent-based (individual-based) approach with internal dynamics describing signal transduction. In addition to the chemotactic behaviour of the bacteria, the individual-based model also includes cell proliferation and death. Cells consume the extracellular nutrient field (chemoattractant), which is modelled using a partial differential equation. Mesoscopic and macroscopic equations representing the behaviour of the hybrid model are derived and the existence of travelling wave solutions for these models is established. It is shown that cell proliferation is necessary for the existence of non-transient (stationary) travelling waves in hybrid models. Additionally, a numerical comparison between the wave speeds of the continuum models and the hybrid models shows good agreement in the case of weak chemotaxis and qualitative agreement for the strong chemotaxis case. In the case of slow cell adaptation, we detect oscillating behaviour of the wave, which cannot be explained by mean-field approximations. © 2013 Society for Mathematical Biology.
Travelling Waves in Hyperbolic Chemotaxis Equations
Xue, Chuan
2010-10-16
Mathematical models of bacterial populations are often written as systems of partial differential equations for the densities of bacteria and concentrations of extracellular (signal) chemicals. This approach has been employed since the seminal work of Keller and Segel in the 1970s (Keller and Segel, J. Theor. Biol. 30:235-248, 1971). The system has been shown to permit travelling wave solutions which correspond to travelling band formation in bacterial colonies, yet only under specific criteria, such as a singularity in the chemotactic sensitivity function as the signal approaches zero. Such a singularity generates infinite macroscopic velocities which are biologically unrealistic. In this paper, we formulate a model that takes into consideration relevant details of the intracellular processes while avoiding the singularity in the chemotactic sensitivity. We prove the global existence of solutions and then show the existence of travelling wave solutions both numerically and analytically. © 2010 Society for Mathematical Biology.
Geometrid outbreak waves travel across Europe.
Tenow, Olle; Nilssen, Arne C; Bylund, Helena; Pettersson, Rickard; Battisti, Andrea; Bohn, Udo; Caroulle, Fabien; Ciornei, Constantin; Csóka, György; Delb, Horst; De Prins, Willy; Glavendekić, Milka; Gninenko, Yuri I; Hrašovec, Boris; Matošević, Dinka; Meshkova, Valentyna; Moraal, Leen; Netoiu, Constantin; Pajares, Juan; Rubtsov, Vasily; Tomescu, Romica; Utkina, Irina
2013-01-01
We show that the population ecology of the 9- to 10-year cyclic, broadleaf-defoliating winter moth (Operophtera brumata) and other early-season geometrids cannot be fully understood on a local scale unless population behaviour is known on a European scale. Qualitative and quantitative data on O. brumata outbreaks were obtained from published sources and previously unpublished material provided by authors of this article. Data cover six decades from the 1950s to the first decade of twenty-first century and most European countries, giving new information fundamental for the understanding of the population ecology of O. brumata. Analyses on epicentral, regional and continental scales show that in each decade, a wave of O. brumata outbreaks travelled across Europe. On average, the waves moved unidirectionally ESE-WNW, that is, toward the Scandes and the Atlantic. When one wave reached the Atlantic coast after 9-10 years, the next one started in East Europe to travel the same c. 3000 km distance. The average wave speed and wavelength was 330 km year(-1) and 3135 km, respectively, the high speed being incongruous with sedentary geometrid populations. A mapping of the wave of the 1990s revealed that this wave travelled in a straight E-W direction. It therefore passed the Scandes diagonally first in the north on its way westward. Within the frame of the Scandes, this caused the illusion that the wave moved N-S. In analogy, outbreaks described previously as moving S-N or occurring contemporaneously along the Scandes were probably the result of continental-scale waves meeting the Scandes obliquely from the south or in parallel. In the steppe zone of eastern-most and south-east Europe, outbreaks of the winter moth did not participate in the waves. Here, broadleaved stands are small and widely separated. This makes the zone hostile to short-distance dispersal between O. brumata subpopulations and prevents synchronization within meta-populations. We hypothesize that hostile
Millimeter-wave gyrotron traveling-wave tube amplifiers
Du, Chao-Hai
2014-01-01
A gyrotron traveling-wave amplifier (gyro-TWT) with the high-power and broad-band capabilities is considered as a turn-on key for next generation high-resolution radar. The book presents comprehensive theory, methods, and physics related to gyro-TWT. The most challenging problem of instability competition has been for the first time addressed in a focused and systematic way, and reported via concise states and vivid pictures. The book is likely to meet the interest of researchers and engineers in radar and microwave technology, who would like to study the gyro-TWTs and to promote its application in millimeter-wave radars. Chao-Hai Du is a research professor, and Pu-Kun Liu is a full professor, at Peking University, Beijing, P. R. China.
Traveling-Wave Maser for 32 GHz
Shell, James; Clauss, Robert
2009-01-01
The figure depicts a traveling-wave ruby maser that has been designed (though not yet implemented in hardware) to serve as a low-noise amplifier for reception of weak radio signals in the frequency band of 31.8 to 32.3 GHz. The design offers significant improvements over previous designs of 32-GHz traveling-wave masers. In addition, relative to prior designs of 32-GHz amplifiers based on high-electron-mobility transistors, this design affords higher immunity to radio-frequency interference and lower equivalent input noise temperature. In addition to the basic frequency-band and low-noise requirements, the initial design problem included a requirement for capability of operation in a closed-cycle helium refrigerator at a temperature .4 K and a requirement that the design be mechanically simplified, relative to prior designs, in order to minimize the cost of fabrication and assembly. Previous attempts to build 32- GHz traveling-wave masers involved the use of metallic slow-wave structures comprising coupled transverse electromagnetic (TEM)-mode resonators that were subject to very tight tolerances and, hence, were expensive to fabricate and assemble. Impedance matching for coupling signals into and out of these earlier masers was very difficult. A key feature of the design is a slow-wave structure, the metallic portions of which would be mechanically relatively simple in that, unlike in prior slow-wave structures, there would be no internal metal steps, irises, or posts. The metallic portions of the slow-wave structure would consist only of two rectangular metal waveguide arms. The arms would contain sections filled with the active material (ruby) alternating with evanescent-wave sections. This structure would be transparent in both the signal-frequency band (the aforementioned range of 31.8 to 32.3 GHz) and the pump-frequency band (65.75 to 66.75 GHz), and would impose large slowing factors in both frequency bands. Resonant ferrite isolators would be placed in the
Space-Qualified Traveling-Wave Tube
Wilson, Jeffrey D.; Krawczyk, Richard; Simons, Rainee N.; Williams, Wallace D.; Robbins, Neal R.; Dibb, Daniel R.; Menninger, William L.; Zhai, Xiaoling; Benton, Robert T.
2010-01-01
The L-3 Communications Electron Technologies, Inc. Model 999HA traveling-wave tube (TWT), was developed for use as a high-power microwave amplifier for high-rate transmission of data and video signals from deep space to Earth (see figure). The 999HA is a successor to the 999H a non-space qualified TWT described in High-Power, High-Efficiency Ka-Band Traveling-Wave Tube (LEW-17900-1), NASA Tech Briefs, Vol. 31, No. 2 (February 2007), page 32. Operating in the 31.8-to-32.3 GHz frequency band, the 999HA has been shown to generate 252 W of continuous- wave output power at 62 percent overall power efficiency a 75-percent increase in output power over the 999H. The mass of the 999HA is 35 percent less than that of the 999H. Moreover, taking account of the elimination of a Faraday cage that is necessary for operation of the 999H but is obviated by a redesign of high-voltage feed-throughs for the 999HA, the overall reduction in mass becomes 57 percent with an 82 percent reduction in volume. Through a series of rigorous tests, the 999HA has been qualified for operation aboard spacecraft with a lifetime exceeding seven years. Offspring of the 999HA will fly on the Kepler and Lunar Reconnaissance Orbiter missions.
Bifurcations and new exact travelling wave solutions for the ...
Indian Academy of Sciences (India)
2016-10-17
Oct 17, 2016 ... Abstract. By using the method of dynamical system, the bidirectional wave equations are considered. Based on this method, all kinds of phase portraits of the reduced travelling wave system in the parametric space are given. All possible bounded travelling wave solutions such as dark soliton solutions, ...
The Traveling Wave Reactor: Design and Development
Directory of Open Access Journals (Sweden)
John Gilleland
2016-03-01
Full Text Available The traveling wave reactor (TWR is a once-through reactor that uses in situ breeding to greatly reduce the need for enrichment and reprocessing. Breeding converts incoming subcritical reload fuel into new critical fuel, allowing a breed-burn wave to propagate. The concept works on the basis that breed-burn waves and the fuel move relative to one another. Thus either the fuel or the waves may move relative to the stationary observer. The most practical embodiments of the TWR involve moving the fuel while keeping the nuclear reactions in one place−sometimes referred to as the standing wave reactor (SWR. TWRs can operate with uranium reload fuels including totally depleted uranium, natural uranium, and low-enriched fuel (e.g., 5.5% 235U and below, which ordinarily would not be critical in a fast spectrum. Spent light water reactor (LWR fuel may also serve as TWR reload fuel. In each of these cases, very efficient fuel usage and significant reduction of waste volumes are achieved without the need for reprocessing. The ultimate advantages of the TWR are realized when the reload fuel is depleted uranium, where after the startup period, no enrichment facilities are needed to sustain the first reactor and a chain of successor reactors. TerraPower's conceptual and engineering design and associated technology development activities have been underway since late 2006, with over 50 institutions working in a highly coordinated effort to place the first unit in operation by 2026. This paper summarizes the TWR technology: its development program, its progress, and an analysis of its social and economic benefits.
Major dust storms and westward traveling waves on Mars
Wang, Huiqun
2017-04-01
Westward traveling waves are observed during major dust storm periods in northern fall and winter. The close correlation in timing makes westward traveling wave one of the signature responses of the Martian atmosphere to major dust storms. Westward traveling waves are dominated by zonal wave number m = 1 in the middle atmosphere and are typically characterized by long wave period. They are associated with significant temperature perturbations near the edge of the north polar vortex. Their wind signals extend to the low latitudes and the southern hemisphere. Their eddy momentum and heat fluxes exhibit complex patterns on a global scale in the middle atmosphere.
Traveling waves and compactons in phase oscillator lattices
Ahnert, Karsten; Pikovsky, Arkady
2008-09-01
We study waves in a chain of dispersively coupled phase oscillators. Two approaches—a quasicontinuous approximation and an iterative numerical solution of the lattice equation—allow us to characterize different types of traveling waves: compactons, kovatons, solitary waves with exponential tails as well as a novel type of semicompact waves that are compact from one side. Stability of these waves is studied using numerical simulations of the initial value problem.
Multimode Traveling-Wave Amplifier Tubes
Buck, E.
1981-02-01
The paper examines the recent developments which makes the Traveling Wave Tube (TWT) more powerful and efficient as a microwave amplifier than the solid state devices. Basic workings and efficiency, which can run, but usually do not, to 55%, are examined. The dependence of the performance of a given TWT upon the qualities of the beam and the manner of its focusing is described. Also described is the development of a multistage depressed collector (MDC) and its first application to a Communication Technology Satellite (CTS) tube, a 12 GHz, coupled-cavity, 200 watt TWT, which resulted in being operated in space for nearly four years and was both the most powerful and the most efficient (around 50%) communications TWT ever flown. It is predicted that the application of efficient refocusing and MDCs, made possible by computer simulations, will greatly increase tube efficiency, and thereby make practical, new multimode tubes which operate, as least partly, in a linear fashion.
BROADBAND TRAVELLING WAVE SEMICONDUCTOR OPTICAL AMPLIFIER
DEFF Research Database (Denmark)
2010-01-01
Broadband travelling wave semiconductor optical amplifier (100, 200, 300, 400, 800) for amplification of light, wherein the amplifier (100, 200, 300, 400, 800) comprises a waveguide region (101, 201, 301, 401, 801) for providing confinement of the light in transverse directions and adapted...... for propagation of the light in at least a first mode along a longitudinal axis (102, 202, 302) of the amplifier (100, 200, 300, 400, 800) in a propagation direction (103, 203, 303), and wherein the waveguide region (101, 201, 301, 401, 801) comprises a gain region (104, 204, 304, 404, 804) for amplifying......, 301, 401, 801) increases along the longitudinal axis (102, 202, 302), and wherein the ratio between the width (106, 206, 306) of the waveguide region (101, 201, 301, 401, 801) and the width (107, 207, 307) of the gain region (104, 204, 304, 404, 804) increases along the longitudinal axis (102, 202...
Traveling wave solutions of a highly nonlinear shallow water equation
Geyer, A.; Quirchmayr, Ronald
2018-01-01
Motivated by the question whether higher-order nonlinear model equations, which go beyond the Camassa-Holm regime of moderate amplitude waves, could point us to new types of waves profiles, we study the traveling wave solutions of a quasilinear evolution equation which models the propagation of
Traveling-wave ion mobility mass spectrometry of protein complexes
DEFF Research Database (Denmark)
Salbo, Rune; Bush, Matthew F; Naver, Helle
2012-01-01
The collision cross-section (Ω) of a protein or protein complex ion can be measured using traveling-wave (T-wave) ion mobility (IM) mass spectrometry (MS) via calibration with compounds of known Ω. The T-wave Ω-values depend strongly on instrument parameters and calibrant selection. Optimization...
Static Trapping of Polar Molecules in a Traveling Wave Decelerator
Quintero-Perez, Marina; Jansen, Paul; Wall, Thomas E.; van den Berg, Joost E.; Hoekstra, Steven; Bethlem, Hendrick L.
2013-01-01
We present experiments on decelerating and trapping ammonia molecules using a combination of a Stark decelerator and a traveling wave decelerator. In the traveling wave decelerator, a moving potential is created by a series of ring-shaped electrodes to which oscillating high voltages (HV) are
Static trapping of polar molecules in a traveling wave decelerator
Quintero Perez, M.; Jansen, P.; Wall, T.E.; van den Berg, J.E.; Hoekstra, S.; Bethlem, H.L.
2013-01-01
We present experiments on decelerating and trapping ammonia molecules using a combination of a Stark decelerator and a traveling wave decelerator. In the traveling wave decelerator, a moving potential is created by a series of ring-shaped electrodes to which oscillating high voltages (HV) are
Bifurcation analysis and the travelling wave solutions of the Klein ...
Indian Academy of Sciences (India)
In this paper, we investigate the bifurcations and dynamic behaviour of travelling wave solutions of the Klein–Gordon–Zakharov equations given in Shang et al, Comput. Math. Appl. 56, 1441 (2008). Under different parameter conditions, we obtain some exact explicit parametric representations of travelling wave solutions by ...
expansion method and travelling wave solutions for the perturbed ...
Indian Academy of Sciences (India)
Abstract. In this paper, we construct the travelling wave solutions to the perturbed nonlinear. Schrödinger's equation (NLSE) with Kerr law non-linearity by the extended (G /G)-expansion method. Based on this method, we obtain abundant exact travelling wave solutions of NLSE with. Kerr law nonlinearity with arbitrary ...
The extended (G/G)-expansion method and travelling wave ...
Indian Academy of Sciences (India)
In this paper, we construct the travelling wave solutions to the perturbed nonlinear Schrödinger's equation (NLSE) with Kerr law non-linearity by the extended (′/)-expansion method. Based on this method, we obtain abundant exact travelling wave solutions of NLSE with Kerr law nonlinearity with arbitrary parameters.
Laboratory Test Results for the Travelling Wave Fault Location Scheme
Directory of Open Access Journals (Sweden)
Krzysztof Glik
2014-03-01
Full Text Available The article describes the travelling wave fault location algorithm for high voltage lines based on wavelet transform. The algorithm is implemented in a prototype and tested in the laboratory. The article presents the hardware and software part of a travelling wave fault locator, methodology and test results.
DEFF Research Database (Denmark)
Ibsen, Lars Bo
2008-01-01
Estimates for the amount of potential wave energy in the world range from 1-10 TW. The World Energy Council estimates that a potential 2TW of energy is available from the world’s oceans, which is the equivalent of twice the world’s electricity production. Whilst the recoverable resource is many...... times smaller it remains very high. For example, whilst there is enough potential wave power off the UK to supply the electricity demands several times over, the economically recoverable resource for the UK is estimated at 25% of current demand; a lot less, but a very substantial amount nonetheless....
Traveling-Wave Tube Efficiency Enhancement
Dayton, James A., Jr.
2011-01-01
Traveling-wave tubes (TWT's) are used to amplify microwave communication signals on virtually all NASA and commercial spacecraft. Because TWT's are a primary power user, increasing their power efficiency is important for reducing spacecraft weight and cost. NASA Glenn Research Center has played a major role in increasing TWT efficiency over the last thirty years. In particular, two types of efficiency optimization algorithms have been developed for coupled-cavity TWT's. The first is the phase-adjusted taper which was used to increase the RF power from 420 to 1000 watts and the RF efficiency from 9.6% to 22.6% for a Ka-band (29.5 GHz) TWT. This was a record efficiency at this frequency level. The second is an optimization algorithm based on simulated annealing. This improved algorithm is more general and can be used to optimize efficiency over a frequency bandwidth and to provide a robust design for very high frequency TWT's in which dimensional tolerance variations are significant.
Characteristic model of travelling wave ultrasonic motor.
Jingzhuo, Shi; Dongmei, You
2014-02-01
In general, the design and analysis of ultrasonic motor and motor's control strategy are based on mathematical model. The academic model is widely used in the analysis of traveling wave ultrasonic motor (TWUSM). But the dispersive characteristic of piezoelectric ceramics and other complicated process, such as the friction, make the model's precision not so accurate. On the other hand, identification modeling method, which is built based on the tested data, has obtained increasing application in the study of ultrasonic motor's control technology. Based on the identification model, many control strategies can be designed easily. But the identification model is an approximate model, so if a more accurate model of ultrasonic motor can be obtained, the analysis and design of motor control system will be more effective. Characteristic model is a kind of identification model which can accurately describe the characteristics of TWUSM. Based on the tested data, this paper proposes the modeling method of ultrasonic motor's characteristic model. The paper also makes a comparison of the effectiveness of different identification algorithms. Aiming at the speed control of ultrasonic motor, the influence of the parameter's initial values on the precision of model is discussed. The calculating results indicate the availability of this characteristic model. Copyright © 2013 Elsevier B.V. All rights reserved.
2-D traveling-wave patterns in binary fluid convection
Energy Technology Data Exchange (ETDEWEB)
Surko, C.M.; Porta, A.L. [Univ. of California, La Jolla, CA (United States)
1996-12-31
An overview is presented of recent experiments designed to study two-dimensional traveling-wave convection in binary fluid convection in a large aspect ratio container. Disordered patterns are observed when convection is initiated. As time proceeds, they evolve to more ordered patterns, consisting of several domains of traveling-waves separated by well-defined domain boundaries. The detailed character of the patterns depends sensitively on the Rayleigh number. Numerical techniques are described which were developed to provide a quantitative characterization of the traveling-wave patterns. Applications of complex demodulation techniques are also described, which make a detailed study of the structure and dynamics of the domain boundaries possible.
Exact traveling wave solutions of some nonlinear evolution equations
Kumar, Hitender; Chand, Fakir
2014-02-01
Using a traveling wave reduction technique, we have shown that Maccari equation, (2+1)-dimensional nonlinear Schrödinger equation, medium equal width equation, (3+1)-dimensional modified KdV-Zakharov-Kuznetsev equation, (2+1)-dimensional long wave-short wave resonance interaction equation, perturbed nonlinear Schrödinger equation can be reduced to the same family of auxiliary elliptic-like equations. Then using extended F-expansion and projective Riccati equation methods, many types of exact traveling wave solutions are obtained. With the aid of solutions of the elliptic-like equation, more explicit traveling wave solutions expressed by the hyperbolic functions, trigonometric functions and rational functions are found out. It is shown that these methods provide a powerful mathematical tool for solving nonlinear evolution equations in mathematical physics. A variety of structures of the exact solutions of the elliptic-like equation are illustrated.
Human cortical traveling waves: dynamical properties and correlations with responses.
Directory of Open Access Journals (Sweden)
Timothy M Patten
Full Text Available The spatiotemporal behavior of human EEG oscillations is investigated. Traveling waves in the alpha and theta ranges are found to be common in both prestimulus and poststimulus EEG activity. The dynamical properties of these waves, including their speeds, directions, and durations, are systematically characterized for the first time, and the results show that there are significant changes of prestimulus spontaneous waves in the presence of an external stimulus. Furthermore, the functional relevance of these waves is examined by studying how they are correlated with reaction times on a single trial basis; prestimulus alpha waves traveling in the frontal-to-occipital direction are found to be most correlated to reaction speeds. These findings suggest that propagating waves of brain oscillations might be involved in mediating long-range interactions between widely distributed parts of human cortex.
Potential applications of microstrip devices with traveling wave resonators
Directory of Open Access Journals (Sweden)
Glushechenko E. N.
2013-05-01
Full Text Available The shortcomings of the known microwave filters in microstrip lines are considered, the advantages of the use of directional traveling-wave filters in microstrip performance and examples of their potential applications are shown.
The classification of the single travelling wave solutions to the ...
Indian Academy of Sciences (India)
The discrimination system for the polynomial method is applied to variant Boussinesq equations to classify single travelling wave solutions. In particular, we construct corresponding solutions to the concrete parameters to show that each solution in the classification can be realized.
Thresholds and travelling waves for the geographical spread of infection.
Diekmann, O
1978-07-27
A nonlinear integral equation of mixed Volterra--Fredholm type describing the spatio-temporal development of an epidemic is derived and analysed. Particular attention is paid to the hair-trigger effect and to the travelling wave problem.
Microfabricated, 94 GHz, 25 W, Helical Traveling Wave Tube Project
National Aeronautics and Space Administration — Teraphysics Corporation proposes to design and develop a microfabricated, 94 GHz, 25 W traveling wave tube (TWT) with 53% efficiency for NASA applications. In Phase...
Hybrid Modelling of a Traveling Wave Piezoelectric Motor
DEFF Research Database (Denmark)
El, Ghouti N.
This thesis considers the modeling of the traveling wave piezoelectric motor (PEM). The rotary traveling wave ultrasonic motor "Shinsei type USR60" is the case study considered in this work. The traveling wave PEM has excellent performance and many useful features such as high holding torque, high...... of an ultrasonic traveling wave rotary piezoelectric motor. This approach is carried out on the basis of the experimental investigation combined with the electrical network method. Consequently, an insight in the analysis of the electromechanical coupling force factor, which is responsible for the electrical...... for control purposes. Consequently, a general state space model is derived on the basis of the special design of the motor of interest, which is a two phase symmetrical system. Furthermore, a simplified model is derived within the framework of various assumptions on the behavior of the stator, which makes...
Periodic traveling interfacial hydroelastic waves with or without mass
Akers, Benjamin F.; Ambrose, David M.; Sulon, David W.
2017-12-01
We study the motion of an interface between two irrotational, incompressible fluids, with elastic bending forces present; this is the hydroelastic wave problem. We prove a global bifurcation theorem for the existence of families of spatially periodic traveling waves on infinite depth. Our traveling wave formulation uses a parameterized curve, in which the waves are able to have multivalued height. This formulation and the presence of the elastic bending terms allow for the application of an abstract global bifurcation theorem of "identity plus compact" type. We furthermore perform numerical computations of these families of traveling waves, finding that, depending on the choice of parameters, the curves of traveling waves can either be unbounded, reconnect to trivial solutions, or end with a wave which has a self-intersection. Our analytical and computational methods are able to treat in a unified way the cases of positive or zero mass density along the sheet, the cases of single-valued or multivalued height, and the cases of single-fluid or interfacial waves.
Bifurcation analysis and the travelling wave solutions of the Klein ...
Indian Academy of Sciences (India)
Math. Comput. 189, 271 (2007); Li et al, Appl. Math. Comput. 175, 61 (2006)). Keywords. Klein–Gordon–Zakharov equations; travelling wave solutions; bifurcation analysis. PACS Nos 05.45.Yv; 2.30.Jr; 04.20.Jb .... level h, it is shown that the exact periodic solutions evolute into solitary wave solution. In ref. [27], by using the ...
Emergence of traveling waves in the spreading of dengue fever
Bianco, Simone; Faatz, Andrea; Cummings, Derek; Shaw, Leah
2010-03-01
Dengue fever is a multistrain mosquito-borne subtropical disease that exhibits complex oscillatory outbreaks. Epidemiological data from Thailand displays traveling waves of infection originating in Bangkok, the largest population center (Cummings et al., Nature 427: 344, 2004). We present a multistrain metapopulation model in which traveling wave like behavior results from migration coupling between heterogeneous regions. The region with the highest effective person-to-person contact rate leads the dynamics. A stochastic version of the model will also be presented.
The classification of the single travelling wave solutions to the ...
Indian Academy of Sciences (India)
Yang [18] studied the envelop solutions to DS equation; Fan [19] gave the classification of the single travelling wave solutions to ... Chree equation and give the classification of all its single travelling wave solutions with p = 1/2 and p = 3/2. ...... [4] W X Ma and B Fuchssteiner, J. Non-Linear Mech. 31, 329 (1996). [5] W X Ma ...
Traveling waves in an optimal velocity model of freeway traffic
Berg, Peter; Woods, Andrew
2001-03-01
Car-following models provide both a tool to describe traffic flow and algorithms for autonomous cruise control systems. Recently developed optimal velocity models contain a relaxation term that assigns a desirable speed to each headway and a response time over which drivers adjust to optimal velocity conditions. These models predict traffic breakdown phenomena analogous to real traffic instabilities. In order to deepen our understanding of these models, in this paper, we examine the transition from a linear stable stream of cars of one headway into a linear stable stream of a second headway. Numerical results of the governing equations identify a range of transition phenomena, including monotonic and oscillating travelling waves and a time- dependent dispersive adjustment wave. However, for certain conditions, we find that the adjustment takes the form of a nonlinear traveling wave from the upstream headway to a third, intermediate headway, followed by either another traveling wave or a dispersive wave further downstream matching the downstream headway. This intermediate value of the headway is selected such that the nonlinear traveling wave is the fastest stable traveling wave which is observed to develop in the numerical calculations. The development of these nonlinear waves, connecting linear stable flows of two different headways, is somewhat reminiscent of stop-start waves in congested flow on freeways. The different types of adjustments are classified in a phase diagram depending on the upstream and downstream headway and the response time of the model. The results have profound consequences for autonomous cruise control systems. For an autocade of both identical and different vehicles, the control system itself may trigger formations of nonlinear, steep wave transitions. Further information is available [Y. Sugiyama, Traffic and Granular Flow (World Scientific, Singapore, 1995), p. 137].
The Traveling Wave Reactor： Design and Development
National Research Council Canada - National Science Library
John Gilleland Robert Petroski KevanWeaver
2016-01-01
... the nuclear reactions in one place-sometimes referred to as the standing wave reactor （SWR）. TWRs can operate with uranium reload fuels including totally depleted uranium, natural uranium, and low-enriched fuel （e.g., 5.5% 23sU and below...
Travelling waves in a singularly perturbed sine-Gordon equation
Derks, Gianne; Doelman, Arjen; van Gils, Stephanus A.; Visser, T.P.P.
2003-01-01
We determine the linearised stability of travelling front solutions of a perturbed sine-Gordon equation. This equation models the long Josephson junction using the RCSJ model for currents across the junction and includes surface resistance for currents along the junction. The travelling waves
Parsimonious wave-equation travel-time inversion for refraction waves
Fu, Lei
2017-02-14
We present a parsimonious wave-equation travel-time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into O(N2) refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave-equation travel-time inversion. Numerical results show that the parsimonious wave-equation travel-time tomogram has about the same accuracy as the tomogram computed by standard wave-equation travel-time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.
Body-wave traveltime and amplitude shifts from asymptotic travelling wave coupling
Pollitz, F.
2006-01-01
We explore the sensitivity of finite-frequency body-wave traveltimes and amplitudes to perturbations in 3-D seismic velocity structure relative to a spherically symmetric model. Using the approach of coupled travelling wave theory, we consider the effect of a structural perturbation on an isolated portion of the seismogram. By convolving the spectrum of the differential seismogram with the spectrum of a narrow window taper, and using a Taylor's series expansion for wavenumber as a function of frequency on a mode dispersion branch, we derive semi-analytic expressions for the sensitivity kernels. Far-field effects of wave interactions with the free surface or internal discontinuities are implicitly included, as are wave conversions upon scattering. The kernels may be computed rapidly for the purpose of structural inversions. We give examples of traveltime sensitivity kernels for regional wave propagation at 1 Hz. For the direct SV wave in a simple crustal velocity model, they are generally complicated because of interfering waves generated by interactions with the free surface and the Mohorovic??ic?? discontinuity. A large part of the interference effects may be eliminated by restricting the travelling wave basis set to those waves within a certain range of horizontal phase velocity. ?? Journal compilation ?? 2006 RAS.
Photo-induced travelling waves in condensed Langmuir monolayers
Tabe, Y; Yokoyama, H
2003-01-01
We report the detailed properties of photo-induced travelling waves in liquid crystalline Langmuir monolayers composed of azobenzene derivatives. When the monolayer, in which the constituent rodlike molecules are coherently tilted from the layer normal, is weakly illuminated to undergo the trans-cis photo-isomerization, spatio-temporal periodic oscillations of the molecular azimuth begin over the entire excited area and propagate as a two-dimensional orientational wave. The wave formation takes place only when the film is formed at an asymmetric interface with broken up-down symmetry and when the chromophores are continuously excited near the long-wavelength edge of absorption to induce repeated photo-isomerizations between the trans and cis forms. Under proper illumination conditions, Langmuir monolayers composed of a wide variety of azobenzene derivatives have been confirmed to exhibit similar travelling waves with velocity proportional to the excitation power irrespective of the degree of amphiphilicity. T...
Traveling wave front solutions in lateral-excitatory neuronal networks
Directory of Open Access Journals (Sweden)
Sittipong Ruktamatakul
2008-05-01
Full Text Available In this paper, we discuss the shape of traveling wave front solutions to a neuronal model with the connection function to be of lateral excitation type. This means that close connecting cells have an inhibitory influence, while cells that aremore distant have an excitatory influence. We give results on the shape of the wave fronts solutions, which exhibit different shapes depend ing on the size of a threshold parameter.
On Irrotational Flows Beneath Periodic Traveling Equatorial Waves
Quirchmayr, Ronald
2017-06-01
We discuss some aspects of the velocity field and particle trajectories beneath periodic traveling equatorial surface waves over a flat bed in a flow with uniform underlying currents. The system under study consists of the governing equations for equatorial ocean waves within a non-inertial frame of reference, where Euler's equation of motion has to be suitably adjusted, in order to account for the influence of the earth's rotation.
Analytical approximation and numerical simulations for periodic travelling water waves
Kalimeris, Konstantinos
2017-12-01
We present recent analytical and numerical results for two-dimensional periodic travelling water waves with constant vorticity. The analytical approach is based on novel asymptotic expansions. We obtain numerical results in two different ways: the first is based on the solution of a constrained optimization problem, and the second is realized as a numerical continuation algorithm. Both methods are applied on some examples of non-constant vorticity. This article is part of the theme issue 'Nonlinear water waves'.
Chaotic Traveling Waves in a Coupled Map Lattice
Kaneko, K
1993-01-01
Abstract: Traveling waves triggered by a phase slip in coupled map lattices are studied. A local phase slip affects globally the system, which is in strong contrast with kink propagation. Attractors with different velocities coexist, and form quantized bands determined by the number of phase slips. The mechanism and statistical and dynamical characters are studied with the use of spatial asymmetry, basin volume ratio, Lyapunov spectra, and mutual information. If the system size is not far from an integer multiple of the selected wavelength, attractors are tori, while weak chaos remains otherwise, which induces chaotic modulation of waves or a chaotic itinerancy of traveling states. In the itinerancy, the residence time distribution obeys the power law distribution, implying the existence of a long-ranged correlation. Supertransients before the formation of traveling waves are noted in the high nonlinearity regime. In the weaker nonlinearity regime corresponding to the frozen random pattern, we have found fluc...
Directory of Open Access Journals (Sweden)
Zhong-ye Tian
2014-01-01
Full Text Available The seismic responses of a long-span cable-stayed bridge under uniform excitation and traveling wave excitation in the longitudinal direction are, respectively, computed. The numerical results show that the bridge’s peak seismic responses vary significantly as the apparent wave velocity decreases. Therefore, the traveling wave effect must be considered in the seismic design of long-span bridges. The bridge’s peak seismic responses do not vary monotonously with the apparent wave velocity due to the traveling wave resonance. A new traveling wave excitation method that can simplify the multisupport excitation process into a two-support excitation process is developed.
Robustness of traveling waves in ongoing activity of visual cortex.
Nauhaus, Ian; Busse, Laura; Ringach, Dario L; Carandini, Matteo
2012-02-29
Numerous studies have revealed traveling waves of activity in sensory cortex, both following sensory stimulation and during ongoing activity. We contributed to this body of work by measuring the spike-triggered average of the local field potential (stLFP) at multiple concurrent locations (Nauhaus et al., 2009) in the visual cortex of anesthetized cats and macaques. We found the stLFP to be progressively delayed at increasing distances from the site of the triggering spikes, and interpreted this as a traveling wave of depolarization originating from that site. Our results were criticized, however, on two grounds. First, a study using the same recording techniques in the visual cortex of awake macaques reported an apparent lack of traveling waves, and proposed that traveling waves could arise artifactually from excessive filtering of the field potentials (Ray and Maunsell, 2011). Second, the interpretability of the stLFP was questioned (Kenneth Miller, personal communication), as the stLFP must reflect not only interactions between spike trains and field potentials, but also correlations within and across the spike trains. Here, we show that our data and interpretation are not imperiled by these criticisms. We reanalyzed our field potentials to remove any possible artifact due to filtering and to discount the effects of correlations within and across the triggering spike trains. In both cases, we found that the traveling waves were still present. In fact, closer inspection of Ray and Maunsell's (2011) data from awake cortex shows that they do agree with ours, as they contain clear evidence for traveling waves.
The origin of traveling waves in an emperor penguin huddle
Gerum, R. C.; Fabry, B.; Metzner, C.; Beaulieu, M.; Ancel, A.; Zitterbart, D. P.
2013-12-01
Emperor penguins breed during the Antarctic winter and have to endure temperatures as low as -50 °C and wind speeds of up to 200 km h-1. To conserve energy, they form densely packed huddles with a triangular lattice structure. Video recordings from previous studies revealed coordinated movements in regular wave-like patterns within these huddles. It is thought that these waves are triggered by individual penguins that locally disturb the huddle structure, and that the traveling wave serves to remove the lattice defects and restore order. The mechanisms that govern wave propagation are currently unknown, however. Moreover, it is unknown if the waves are always triggered by the same penguin in a huddle. Here, we present a model in which the observed wave patterns emerge from simple rules involving only the interactions between directly neighboring individuals, similar to the interaction rules found in other jammed systems, e.g. between cars in a traffic jam. Our model predicts that a traveling wave can be triggered by a forward step of any individual penguin located within a densely packed huddle. This prediction is confirmed by optical flow velocimetry of the video recordings of emperor penguins in their natural habitat.
Up-date of traveling wave tube improvements
Buck, E.
1978-01-01
NASA research in the area of traveling wave tube technology is reviewed, with emphasis on the basic physics of guns and collectors and a computer model for the interaction between the electron beam and the RF circuit. The design of a multistage depressed collector, capable of multiplying tube efficiency by a factor of two or more, is presented; one such design has been adopted for commercial traveling wave tube production. A three-dimensional model of electron trajectories toward the collector also receives attention, as does the problem of RF circuit losses.
Dispersion-Engineered Traveling Wave Kinetic Inductance Parametric Amplifier
Zmuidzinas, Jonas (Inventor); Day, Peter K. (Inventor)
2014-01-01
A traveling wave kinetic inductance parametric amplifier comprises a superconducting transmission line and a dispersion control element. The transmission line can include periodic variations of its dimension along its length. The superconducting material can include a high normal state resistivity material. In some instances the high normal state resistivity material includes nitrogen and a metal selected from the group consisting of titanium, niobium and vanadium. The traveling wave kinetic inductance parametric amplifier is expected to exhibit a noise temperature below 100 mK/GHz.
Dynamics and bifurcations of travelling wave solutions of R(m, n ...
Indian Academy of Sciences (India)
Under different regions of para- metric spaces, various sufficient conditions to guarantee the existence of the above waves are given. Moreover, some explicit exact parametric representations of travelling wave solutions are listed. Keywords. R(m, n) equations; solitary wave; periodic wave; breaking wave; solitary cusp wave ...
Snakes mimic earthworms: propulsion using rectilinear travelling waves
Marvi, Hamidreza; Bridges, Jacob; Hu, David L.
2013-01-01
In rectilinear locomotion, snakes propel themselves using unidirectional travelling waves of muscular contraction, in a style similar to earthworms. In this combined experimental and theoretical study, we film rectilinear locomotion of three species of snakes, including red-tailed boa constrictors, Dumeril's boas and Gaboon vipers. The kinematics of a snake's extension–contraction travelling wave are characterized by wave frequency, amplitude and speed. We find wave frequency increases with increasing body size, an opposite trend than that for legged animals. We predict body speed with 73–97% accuracy using a mathematical model of a one-dimensional n-linked crawler that uses friction as the dominant propulsive force. We apply our model to show snakes have optimal wave frequencies: higher values increase Froude number causing the snake to slip; smaller values decrease thrust and so body speed. Other choices of kinematic variables, such as wave amplitude, are suboptimal and appear to be limited by anatomical constraints. Our model also shows that local body lifting increases a snake's speed by 31 per cent, demonstrating that rectilinear locomotion benefits from vertical motion similar to walking. PMID:23635494
The classification of the single travelling wave solutions to the ...
Indian Academy of Sciences (India)
2016-09-21
Sep 21, 2016 ... For example,. Fan used Liu's method [11,12] to invest the generalized equal width equation and Pochhammer–Chree equa- tion, and she obtained all the possible travelling wave solutions including elliptic functions and hyperelliptic functions. In this paper, we consider the variant Boussinesq equations [13].
Recent developments in guided wave travel time tomography
Zon, A.T. van; Volker, A.W.F.
2014-01-01
The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections. Guided wave tomography had been developed to create a map of the wall thickness using the travel times of guided
New travelling wave solutions for nonlinear stochastic evolution ...
Indian Academy of Sciences (India)
The nonlinear stochastic evolution equations have a wide range of applications in physics, chemistry, biology, economics and finance from various points of view. In this paper, the (′/)-expansion method is implemented for obtaining new travelling wave solutions of the nonlinear (2 + 1)-dimensional stochastic ...
Traveling-wave deceleration of SrF molecules
van den Berg, J.E.; Chirayath Mathavan, Sreekanth; Meinema, C.; Nauta, Janko; Nijbroek, T. H.; Jungmann, K.; Bethlem, H. L.; Hoekstra, S.
We report on the production, deceleration and detection of a SrF molecular beam. The molecules are captured from a supersonic expansion and are decelerated in the X-2 Sigma(+) (v = 0, N = 1) state. We demonstrate the removal of up to 40% of the kinetic energy with a 2 m long modular traveling-wave
A generic travelling wave solution in dissipative laser cavity
Indian Academy of Sciences (India)
Using perturbation method, the stability region is identified. ... A split-step Fourier method and pseudospectral method have been used for direct numerical solution of the CGLE and travelling wave profiles identical to the analytical profiles ... School of Physics and Materials Science, Thapar University, Patiala 147 004, India ...
The classification of single travelling wave solutions to the Camassa ...
Indian Academy of Sciences (India)
Introduction. Classifications of single travelling wave solutions to some nonlinear differential equations have been obtained extensively by the complete discrimination system for polynomial method proposed by Liu [1–7]. Furthermore, Wang and Li [8] used Liu's method and factorization method proposed by Cornejo-Pérez ...
K-Band Traveling-Wave Tube Amplifier
Force, Dale A.; Simons, Rainee N.; Peterson, Todd T.; Spitsen, Paul C.
2010-01-01
A new space-qualified, high-power, high-efficiency, K-band traveling-wave tube amplifier (TWTA) will provide high-rate, high-capacity, direct-to-Earth communications for science data and video gathered by the Lunar Reconnaissance Orbiter (LRO) during its mission. Several technological advances were responsible for the successful demonstration of the K-band TWTA.
Exact travelling wave solutions for some important nonlinear ...
Indian Academy of Sciences (India)
The two-dimensional nonlinear physical models and coupled nonlinear systems such as Maccari equations, Higgs equations and Schrödinger–KdV equations have been widely applied in many branches of physics. So, finding exact travelling wave solutions of such equations are very helpful in the theories and numerical ...
Investigating The Travelling Wave Solution For an SIR Endemic ...
African Journals Online (AJOL)
This paper presents the travelling wave solution for an SIR endemic disease model with no disease related death when the spatial spread of the susceptible is not negligible. In this case the disease is driven by both the susceptible and the infective classes. The population is open since the disease is habitually prevalent in ...
Traveling wave solutions of the BBM-like equations
Energy Technology Data Exchange (ETDEWEB)
Kuru, S [Department of Physics, Faculty of Science, Ankara University 06100 Ankara (Turkey)], E-mail: kuru@science.ankara.edu.tr
2009-09-18
In this work, we apply the factorization technique to the Benjamin-Bona-Mahony-like equations, B(m, n), in order to get traveling wave solutions. We will focus on some special cases for which m {ne} n, and we will obtain these solutions in terms of the special forms of Weierstrass functions.
Thick barrier buckets using the SPS travelling wave structures
Bohl, T; Shaposhnikova, Elena; CERN. Geneva. SPS and LEP Division
2000-01-01
The barrier bucket technique has many interesting applications and has been tested in different laboratories around the world. In all these cases; specially designed, very broad band (Q = 1) cavities were installed in the ring. We used the existing travelling wave cavities in the SPS to create multi-period barrier buckets and hold the beam.
Numerical continuation of travelling waves and pulses in neural fields
Meijer, Hil Gaétan Ellart; Coombes, Stephen
2013-01-01
We study travelling waves and pulses in neural fields. Neural fields are a macroscopic description of the activity of brain tissue, which mathematically are formulated as integro-differential equations. While linear and weakly nonlinear analysis can describe instabilities and small amplitude
Symbolic computation and abundant travelling wave solutions to ...
Indian Academy of Sciences (India)
2016-12-09
Dec 9, 2016 ... 2Department of Mathematics, National University of Computer and Emerging Sciences, Lahore, Pakistan. 3Centre for Undergraduate Studies, ... in physical science and engineering. Many of these solutions are new and ... scientists to find exact travelling wave solutions of. NLEE, i.e. the inverse scattering ...
Travelling wave solutions for (N+ 1)-dimensional nonlinear evolution ...
Indian Academy of Sciences (India)
... Public Lectures · Lecture Workshops · Refresher Courses · Symposia. Home; Journals; Pramana – Journal of Physics; Volume 75; Issue 4. Travelling wave solutions for ( + 1)-dimensional nonlinear evolution equations. Jonu Lee Rathinasamy Sakthivel. Research Articles Volume 75 Issue 4 October 2010 pp 565-578 ...
Travelling wave solutions to nonlinear physical models by means of ...
Indian Academy of Sciences (India)
This paper presents the ﬁrst integral method to carry out the integration of nonlinear partial differential equations in terms of travelling wave solutions. For illustration, three important equations of mathematical physics are analytically investigated. Through the established ﬁrst integrals, exact solutions are successfully ...
Static trapping of polar molecules in a traveling wave decelerator.
Quintero-Pérez, Marina; Jansen, Paul; Wall, Thomas E; van den Berg, Joost E; Hoekstra, Steven; Bethlem, Hendrick L
2013-03-29
We present experiments on decelerating and trapping ammonia molecules using a combination of a Stark decelerator and a traveling wave decelerator. In the traveling wave decelerator, a moving potential is created by a series of ring-shaped electrodes to which oscillating high voltages (HV) are applied. By lowering the frequency of the applied voltages, the molecules confined in the moving trap are decelerated and brought to a standstill. As the molecules are confined in a true 3D well, this kind of deceleration has practically no losses, resulting in a great improvement on the usual Stark deceleration techniques. The necessary voltages are generated by amplifying the output of an arbitrary wave generator using fast HV amplifiers, giving us great control over the trapped molecules. We illustrate this by experiments in which we adiabatically cool trapped NH3 and ND3 molecules and resonantly excite their motion.
Small energy traveling waves for the Euler-Korteweg system
Audiard, Corentin
2017-09-01
We investigate the existence and properties of traveling waves for the Euler-Korteweg system with general capillarity and pressure. Our main result is the existence in dimension two of waves with arbitrarily small energies. They are obtained as minimizers of a modified energy with fixed momentum. The proof builds upon various ideas developed for the Gross-Pitaevskii equation (and more generally nonlinear Schrödinger equations with non zero limit at infinity). Even in the Schrödinger case, the fact that we work with the hydrodynamical variables and a general pressure law both brings new difficulties and some simplifications. Independently, in dimension one we prove that the criterion for the linear instability of traveling waves from Benzoni-Gavage (2013 Differ. Integral Equ. 26 439-85) actually implies nonlinear instability.
Traveling wave solutions for reaction-diffusion systems
DEFF Research Database (Denmark)
Pedersen, Michael; Lin, Zhigui; Tian, Canrong
2010-01-01
This paper is concerned with traveling waves of reaction–diffusion systems. The definition of coupled quasi-upper and quasi-lower solutions is introduced for systems with mixed quasimonotone functions, and the definition of ordered quasi-upper and quasi-lower solutions is also given for systems...... with quasimonotone nondecreasing functions. By the monotone iteration method, it is shown that if the system has a pair of coupled quasi-upper and quasi-lower solutions, then there exists at least a traveling wave solution. Moreover, if the system has a pair of ordered quasi-upper and quasi-lower solutions......, then there exists at least a traveling wavefront. As an application we consider the delayed system of a mutualistic model....
Travelling waves in models of neural tissue: from localised structures to periodic waves
Meijer, Hil Gaétan Ellart; Coombes, Stephen
2014-01-01
We consider travelling waves (fronts, pulses and periodics) in spatially extended one dimensional neural field models. We demonstrate for an excitatory field with linear adaptation that, in addition to an expected stable pulse solution, a stable anti-pulse can exist. Varying the adaptation strength
Traveling-wave tubes and backward-wave oscillators with weak external magnetic fields.
Abu-elfadl, T M; Nusinovich, G S; Shkvarunets, A G; Carmel, Y; Antonsen, T M; Goebel, D
2001-06-01
Recent development of plasma-assisted slow-wave oscillators [Goebel et al. IEEE Trans. Plasma Sci. 22, 547 (1994)], microwave sources that operate without guiding magnetic fields, has stimulated interest in the theoretical analysis of such tubes. In principle, in the absence of guiding magnetic fields, due to the space charge forces and the radial electric field of the wave, the electrons may propagate radially outward which increases electron coupling to the slow wave whose field is localized near the slow-wave structure (SWS). This increases the wave growth rate and efficiency, and hence allows one to shorten the interaction region. So the radial electron motion can be beneficial for operation if it does not lead to interception of electrons by the SWS. To avoid this interception a weak external magnetic field can be applied. The theory developed describes the effect of weak magnetic fields on the operation of traveling-wave tubes and backward-wave oscillators with electrons moving not only axially but also transversely. This theory allows one to estimate the magnetic field required for protecting the SWS from electron bombardment at different power levels. Theoretical predictions of the efficiency enhancement due to the weak magnetic field are confirmed in experiments.
Traveling wave deflector design for femtosecond streak camera
Pei, Chengquan; Wu, Shengli; Luo, Duan; Wen, Wenlong; Xu, Junkai; Tian, Jinshou; Zhang, Minrui; Chen, Pin; Chen, Jianzhong; Liu, Rong
2017-05-01
In this paper, a traveling wave deflection deflector (TWD) with a slow-wave property induced by a microstrip transmission line is proposed for femtosecond streak cameras. The pass width and dispersion properties were simulated. In addition, the dynamic temporal resolution of the femtosecond camera was simulated by CST software. The results showed that with the proposed TWD a femtosecond streak camera can achieve a dynamic temporal resolution of less than 600 fs. Experiments were done to test the femtosecond streak camera, and an 800 fs dynamic temporal resolution was obtained. Guidance is provided for optimizing a femtosecond streak camera to obtain higher temporal resolution.
Traveling wave deflector design for femtosecond streak camera
Energy Technology Data Exchange (ETDEWEB)
Pei, Chengquan; Wu, Shengli [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi' an Jiaotong University, Xi’an 710049 (China); Luo, Duan [Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Wen, Wenlong [Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); Xu, Junkai [Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Tian, Jinshou, E-mail: tianjs@opt.ac.cn [Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006 (China); Zhang, Minrui; Chen, Pin [Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Chen, Jianzhong [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi' an Jiaotong University, Xi’an 710049 (China); Liu, Rong [Xi' an Technological University, Xi' an 710021 (China)
2017-05-21
In this paper, a traveling wave deflection deflector (TWD) with a slow-wave property induced by a microstrip transmission line is proposed for femtosecond streak cameras. The pass width and dispersion properties were simulated. In addition, the dynamic temporal resolution of the femtosecond camera was simulated by CST software. The results showed that with the proposed TWD a femtosecond streak camera can achieve a dynamic temporal resolution of less than 600 fs. Experiments were done to test the femtosecond streak camera, and an 800 fs dynamic temporal resolution was obtained. Guidance is provided for optimizing a femtosecond streak camera to obtain higher temporal resolution.
Analytical approximation and numerical simulations for periodic travelling water waves.
Kalimeris, Konstantinos
2018-01-28
We present recent analytical and numerical results for two-dimensional periodic travelling water waves with constant vorticity. The analytical approach is based on novel asymptotic expansions. We obtain numerical results in two different ways: the first is based on the solution of a constrained optimization problem, and the second is realized as a numerical continuation algorithm. Both methods are applied on some examples of non-constant vorticity.This article is part of the theme issue 'Nonlinear water waves'. © 2017 The Author(s).
On a `time' reparametrization in relativistic electrodynamics with travelling waves
Fiore, Gaetano
2018-01-01
We briefly report on our method [23] of simplifying the equations of motion of charged particles in an electromagnetic (EM) field that is the sum of a plane travelling wave and a static part; it is based on changes of the dependent variables and the independent one (light-like coordinate ξ instead of time t). We sketch its application to a few cases of extreme laser-induced accelerations, both in vacuum and in plane problems at the vacuum-plasma interface, where we are able to reduce the system of the (Lorentz-Maxwell and continuity) partial differential equations into a family of decoupled systems of Hamilton equations in 1 dimension. Since Fourier analysis plays no role, the method can be applied to all kind of travelling waves, ranging from almost monochromatic to socalled "impulses".
Exact traveling wave solutions for system of nonlinear evolution equations.
Khan, Kamruzzaman; Akbar, M Ali; Arnous, Ahmed H
2016-01-01
In this work, recently deduced generalized Kudryashov method is applied to the variant Boussinesq equations, and the (2 + 1)-dimensional breaking soliton equations. As a result a range of qualitative explicit exact traveling wave solutions are deduced for these equations, which motivates us to develop, in the near future, a new approach to obtain unsteady solutions of autonomous nonlinear evolution equations those arise in mathematical physics and engineering fields. It is uncomplicated to extend this method to higher-order nonlinear evolution equations in mathematical physics. And it should be possible to apply the same method to nonlinear evolution equations having more general forms of nonlinearities by utilizing the traveling wave hypothesis.
On the structure of spectra of travelling waves
Directory of Open Access Journals (Sweden)
Péter Simon
2003-10-01
Full Text Available The linear stability of the travelling wave solutions of a general reaction-diffusion system is investigated. The spectrum of the corresponding second order differential operator $L$ is studied. The problem is reduced to an asymptotically autonomous first order linear system. The relation between the spectrum of $L$ and the corresponding first order system is dealt with in detail. The first order system is investigated using exponential dichotomies. A self-contained short presentation is shown for the study of the spectrum, with elementary proofs. An algorithm is given for the determination of the exact position of the essential spectrum. The Evans function method for determining the isolated eigenvalues of $L$ is also presented. The theory is illustrated by three examples: a single travelling wave equation, a three variable combustion model and the generalized KdV equation.
Photo-induced travelling waves in condensed Langmuir monolayers
Energy Technology Data Exchange (ETDEWEB)
Tabe, Y [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan); Yamamoto, T [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan); Yokoyama, H [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan)
2003-06-01
We report the detailed properties of photo-induced travelling waves in liquid crystalline Langmuir monolayers composed of azobenzene derivatives. When the monolayer, in which the constituent rodlike molecules are coherently tilted from the layer normal, is weakly illuminated to undergo the trans-cis photo-isomerization, spatio-temporal periodic oscillations of the molecular azimuth begin over the entire excited area and propagate as a two-dimensional orientational wave. The wave formation takes place only when the film is formed at an asymmetric interface with broken up-down symmetry and when the chromophores are continuously excited near the long-wavelength edge of absorption to induce repeated photo-isomerizations between the trans and cis forms. Under proper illumination conditions, Langmuir monolayers composed of a wide variety of azobenzene derivatives have been confirmed to exhibit similar travelling waves with velocity proportional to the excitation power irrespective of the degree of amphiphilicity. The dynamics can be qualitatively explained by the modified reaction-diffusion model proposed by Reigada, Sagues and Mikhailov.
Development of a thermoacoustic travelling-wave refrigerator
Pierens, Matthieu; Thermeau, Jean-Pierre; Le Pollès, Thierry; Duthil, Patxi
2012-01-01
International audience; Thermoacoustic phenomenon deals with the interaction between heat and sound. This physical field is studied from the later seventies to develop heat machines for energy conversion. A thermoacoustic refrigerator uses a mechanical work, induced by an intense acoustic wave, to pump heat from a cold source and rejecting heat to an ambient source. In the framework of the European project called THATEA focusing on energy conversion efficiencies, a thermoacoustic travelling-w...
New exact travelling wave solutions of some complex nonlinear equations
Bekir, Ahmet
2009-04-01
In this paper, we establish exact solutions for complex nonlinear equations. The tanh-coth and the sine-cosine methods are used to construct exact periodic and soliton solutions of these equations. Many new families of exact travelling wave solutions of the coupled Higgs and Maccari equations are successfully obtained. These solutions may be important of significance for the explanation of some practical physical problems.
Traveling waves in a spring-block chain sliding down a slope
Morales, J. E.; James, G.; Tonnelier, A.
2017-07-01
Traveling waves are studied in a spring slider-block model. We explicitly construct front waves (kinks) for a piecewise-linear spinodal friction force. Pulse waves are obtained as the matching of two traveling fronts with identical speeds. Explicit formulas are obtained for the wavespeed and the wave form in the anticontinuum limit. The link with localized waves in a Burridge-Knopoff model of an earthquake fault is briefly discussed.
Zhang, Dongsheng; Wang, Shiyu; Xiu, Jie
2017-11-01
Elastic wave quality determines the operating performance of traveling wave ultrasonic motor (TWUM). The time-variant circumferential force from the shrink of piezoelectric ceramic is one of the factors that distort the elastic wave. The distorted waveshape deviates from the ideal standard sinusoidal fashion and affects the contact mechanics and driving performance. An analytical dynamic model of ring ultrasonic motor is developed. Based on this model, the piezoelectric parametric effects on the wave distortion and contact mechanics are examined. Multi-scale method is employed to obtain unstable regions and distorted wave response. The unstable region is verified by Floquét theory. Since the waveshape affects the contact mechanism, a contact model involving the distorted waveshape and normal stiffness of the contact layer is established. The contact model is solved by numerical calculation. The results verify that the deformation of the contact layer deviates from sinusoidal waveshape and the pressure distribution is changed, which influences the output characteristics directly. The surface speed within the contact region is averaged such that the rotor speed decreases for lower torque and increases for larger torque. The effects from different parametric strengths, excitation frequencies and pre-pressures on pressure distribution and torque-speed relation are compared. Copyright © 2017 Elsevier B.V. All rights reserved.
Amplification of traveling magnetostatic waves by parametric pumping
Bashkovskiy, A. V.; Zubkov, V. I.; Krutsenko, I. V.; Melkov, G. A.
1984-07-01
An experiment was performed with traveling surface magnetostatic waves in a structure consisting of two parallel microstrip lines isolated from one another on a common Polycor base, both covered with a YIG (yttrium-iron garnet) film on a GGG (gallium-gadolinum garnet) substrate. An open dielectric pumping cavity resonator at the center of the 9.6 micron thick YIG film on its substrate side was operating in the parallel mode, with its magnetic field parallel to the constant external magnetic field, this mode of operation requiring less power than the transverse mode. The frequency of surface magneto-static waves on the YIG film (saturation magnetization 4 pi m sub o = 1750 Gs, width of resonance line 2 delta H= 0.5 Oe) was approx 4.7 GHz and the pumping frequency was approx. 9.4 GHz, with the intensity of the external magnetic field approx. 940 Oe. Heating of the film was avoided by pumping with pulses of 20 micro sec duration at a repetition rate of 50 Hz rather than with a continuous wave. This experiment for the first time revealed amplification of surface magnetostatic waves, the gain reaching 16 dB at a pumping powr of 2.2 W with 8 MHz bandwidth and 3 micro sec. delay time. Amplification occurred in a magnetic field of intensity H0 corresponding to maximum signal transmission from input to output microstrip line.
Experimental results using active control of traveling wave power flow
Miller, David W.; Hall, Steven R.
1991-01-01
Active structural control experiments conducted on a 24-ft pinned-free beam derived feedback compensators on the basis of a traveling-wave approach. A compensator is thus obtained which eliminates resonant behavior by absorbing all impinging power. A causal solution is derived for this noncausal compensator which mimics its behavior in a given frequency range, using the Wiener-Hopf. This optimal Wiener-Hopf compensator's structure-damping performance is found to exceed any obtainable by means of rate feedback. Performance limitations encompassed the discovery of frequencies above which the sensor and actuator were no longer dual and an inadvertent coupling of the control hardware to unmodeled structure torsion modes.
Nutto, C.; Steiner, O.; Schaffenberger, W.; Roth, M.
2012-02-01
Context. Observations of waves at frequencies above the acoustic cut-off frequency have revealed vanishing wave travel-times in the vicinity of strong magnetic fields. This detection of apparently evanescent waves, instead of the expected propagating waves, has remained a riddle. Aims: We investigate the influence of a strong magnetic field on the propagation of magneto-acoustic waves in the atmosphere of the solar network. We test whether mode conversion effects can account for the shortening in wave travel-times between different heights in the solar atmosphere. Methods: We carry out numerical simulations of the complex magneto-atmosphere representing the solar magnetic network. In the simulation domain, we artificially excite high frequency waves whose wave travel-times between different height levels we then analyze. Results: The simulations demonstrate that the wave travel-time in the solar magneto-atmosphere is strongly influenced by mode conversion. In a layer enclosing the surface sheet defined by the set of points where the Alfvén speed and the sound speed are equal, called the equipartition level, energy is partially transferred from the fast acoustic mode to the fast magnetic mode. Above the equipartition level, the fast magnetic mode is refracted due to the large gradient of the Alfvén speed. The refractive wave path and the increasing phase speed of the fast mode inside the magnetic canopy significantly reduce the wave travel-time, provided that both observing levels are above the equipartition level. Conclusions: Mode conversion and the resulting excitation and propagation of fast magneto-acoustic waves is responsible for the observation of vanishing wave travel-times in the vicinity of strong magnetic fields. In particular, the wave propagation behavior of the fast mode above the equipartition level may mimic evanescent behavior. The present wave propagation experiments provide an explanation of vanishing wave travel-times as observed with multi
Lateralization of travelling wave response in the hearing organ of bushcrickets.
Palghat Udayashankar, Arun; Kössl, Manfred; Nowotny, Manuela
2014-01-01
Travelling waves are the physical basis of frequency discrimination in many vertebrate and invertebrate taxa, including mammals, birds, and some insects. In bushcrickets (Tettigoniidae), the crista acustica is the hearing organ that has been shown to use sound-induced travelling waves. Up to now, data on mechanical characteristics of sound-induced travelling waves were only available along the longitudinal (proximal-distal) direction. In this study, we use laser Doppler vibrometry to investigate in-vivo radial (anterior-posterior) features of travelling waves in the tropical bushcricket Mecopoda elongata. Our results demonstrate that the maximum of sound-induced travelling wave amplitude response is always shifted towards the anterior part of the crista acustica. This lateralization of the travelling wave response induces a tilt in the motion of the crista acustica, which presumably optimizes sensory transduction by exerting a shear motion on the sensory cilia in this hearing organ.
Lateralization of travelling wave response in the hearing organ of bushcrickets.
Directory of Open Access Journals (Sweden)
Arun Palghat Udayashankar
Full Text Available Travelling waves are the physical basis of frequency discrimination in many vertebrate and invertebrate taxa, including mammals, birds, and some insects. In bushcrickets (Tettigoniidae, the crista acustica is the hearing organ that has been shown to use sound-induced travelling waves. Up to now, data on mechanical characteristics of sound-induced travelling waves were only available along the longitudinal (proximal-distal direction. In this study, we use laser Doppler vibrometry to investigate in-vivo radial (anterior-posterior features of travelling waves in the tropical bushcricket Mecopoda elongata. Our results demonstrate that the maximum of sound-induced travelling wave amplitude response is always shifted towards the anterior part of the crista acustica. This lateralization of the travelling wave response induces a tilt in the motion of the crista acustica, which presumably optimizes sensory transduction by exerting a shear motion on the sensory cilia in this hearing organ.
Traveling wave resonant ring for electron cloud studies
Iriso, U; Laurent, J M; Mostacci, A
2004-01-01
Within the framework of the CERN program on electron cloud effects in accelerators, a coaxial multipacting test stand was built. In order to simulate bunched beam, the test stand is subjected to short rf pulses. The field strength in a traveling wave mode is sufficient to trigger multipacting in "as received" surfaces, but not in chambers treated to reduce the secondary emission yield. Thus a number of upgrades in the bench setup have been pursued, mainly in two directions. The first one is a general reduction in mismatching (i.e., electrical losses) amongst the different parts of the setup. Secondly, instead of dumping the pulsed power into a load, it is recirculated by means of a broadband working regime resonant ring. This ring required the design of a directional coupler with up to 1 kV dc isolation, very low transmission losses, and a four octave bandwidth. This paper reports on the steps required to build this traveling wave resonant ring (improvements on the chamber and implementation of the coupler) a...
A Traveling Wave Resonant Ring for Electron Cloud Studies
Iriso, U; Laurent, J M; Mostacci, A
2004-01-01
Within the framework of the CERN program on electron cloud effects in accelerators, a coaxial multipacting test stand was built. In order to simulate bunched beam, the test stand is subjected to short RF pulses. The field strength in a traveling wave mode is sufficient to trigger multipacting in “as received” surfaces, but not in chambers treated to reduce the secondary emission yield. Thus a number of upgrades in the bench set-up have been pursued, mainly in two directions. The first one is a general reduction in mismatching (i.e. electrical losses) amongst the different parts of the setup. Secondly, instead of dumping the pulsed power into a load, it is recirculated by means of a broadband working regime resonant ring. This ring required the design of a directional coupler with up to 1 kV DC isolation, very low transmission losses and a four octave bandwidth. This paper reports on the steps required to build this traveling wave resonant ring (improvements on the chamber and implementation of the coupler...
Electronic Power Conditioner for Ku-band Travelling Wave Tube
Kowstubha, Palle; Krishnaveni, K.; Ramesh Reddy, K.
2017-04-01
A highly sophisticated regulated power supply is known as electronic power conditioner (EPC) is required to energise travelling wave tubes (TWTs), which are used as RF signal amplifiers in satellite payloads. The assembly consisting of TWT and EPC together is known as travelling wave tube amplifier (TWTA). EPC is used to provide isolated and conditioned voltage rails with tight regulation to various electrodes of TWT and makes its RF performance independent of solar bus variations which are caused due to varying conditions of eclipse and sunlit. The payload mass and their power consumption is mainly due to the existence of TWTAs that represent about 35 % of total mass and about 70-90 % (based on the type of satellite application) of overall dc power consumption. This situation ensures a continuous improvement in the design of TWTAs and their associated EPCs to realize more efficient and light products. Critical technologies involved in EPCs are design and configuration, closed loop regulation, component and material selection, energy limiting of high voltage (HV) outputs and potting of HV card etc. This work addresses some of these critical technologies evolved in realizing and testing the state of art of EPC and it focuses on the design of HV supply with a HV and high power capability, up to 6 kV and 170 WRF, respectively required for a space TWTA. Finally, an experimental prototype of EPC with a dc power of 320 W provides different voltages required by Ku-band TWT in open loop configuration.
Low-noise kinetic inductance traveling-wave amplifier using three-wave mixing
Vissers, M. R.; Erickson, R. P.; Ku, H.-S.; Vale, Leila; Wu, Xian; Hilton, G. C.; Pappas, D. P.
2016-01-01
We have fabricated a wide-bandwidth, high dynamic range, low-noise cryogenic amplifier based on a superconducting kinetic inductance traveling-wave device. The device was made from NbTiN and consisted of a long, coplanar waveguide on a silicon chip. By adding a DC current and an RF pump tone, we are able to generate parametric amplification using three-wave mixing (3WM). The devices exhibit gain of more than 15 dB across an instantaneous bandwidth from 4 to 8 GHz. The total usable gain bandwidth, including both sides of the signal-idler gain region, is more than 6 GHz. The noise referred to the input of the devices approaches the quantum limit, with less than 1 photon excess noise. We compare these results directly to the four-wave mixing amplification mode, i.e., without DC-biasing. We find that the 3WM mode allows operation with the pump at lower RF power and at frequencies far from the signal. We have used this knowledge to redesign the amplifiers to utilize primarily 3WM amplification, thereby allowing for direct integration into large scale qubit and detector applications.
Low-noise kinetic inductance traveling-wave amplifier using three-wave mixing.
Vissers, M R; Erickson, R P; Ku, H-S; Vale, Leila; Wu, Xian; Hilton, G; Pappas, D P
We have fabricated a wide-bandwidth, high dynamic range, low-noise cryogenic amplifier based on a superconducting kinetic inductance traveling-wave device. The device was made from NbTiN and consisted of a long, coplanar waveguide on a silicon chip. By adding a DC current and an RF pump tone we are able to generate parametric amplification using three-wave mixing. The devices exhibit gain of more than 15 dB across an instantaneous bandwidth from 4 to 8 GHz. The total usable gain bandwidth, including both sides of the signal-idler gain region, is more than 6 GHz. The noise referred to the input of the devices approaches the quantum limit, with less than 1 photon excess noise. Compared to similarly constructed four-wave mixing amplifiers, these devices operate with the RF pump at ~20 dB lower power and at frequencies far from the signal. This will permit easier integration into large scale qubit and detector applications.
Analytical travelling wave solutions and parameter analysis for the ...
Indian Academy of Sciences (India)
By using dynamical system method, this paper considers the (2+1)-dimensional Davey–Stewartson-type equations. The analytical parametric representations of solitary wave solutions, periodic wave solutions as well as unbounded wave solutions are obtained under different parameter conditions. A few diagrams ...
Tonotopically arranged traveling waves in the miniature hearing organ of bushcrickets.
Directory of Open Access Journals (Sweden)
Arun Palghat Udayashankar
Full Text Available Place based frequency discrimination (tonotopy is a fundamental property of the coiled mammalian cochlea. Sound vibrations mechanically conducted to the hearing organ manifest themselves into slow moving waves that travel along the length of the organ, also referred to as traveling waves. These traveling waves form the basis of the tonotopic frequency representation in the inner ear of mammals. However, so far, due to the secure housing of the inner ear, these waves only could be measured partially over small accessible regions of the inner ear in a living animal. Here, we demonstrate the existence of tonotopically ordered traveling waves covering most of the length of a miniature hearing organ in the leg of bushcrickets in vivo using laser Doppler vibrometery. The organ is only 1 mm long and its geometry allowed us to investigate almost the entire length with a wide range of stimuli (6 to 60 kHz. The tonotopic location of the traveling wave peak was exponentially related to stimulus frequency. The traveling wave propagated along the hearing organ from the distal (high frequency to the proximal (low frequency part of the leg, which is opposite to the propagation direction of incoming sound waves. In addition, we observed a non-linear compression of the velocity response to varying sound pressure levels. The waves are based on the delicate micromechanics of cellular structures different to those of mammals. Hence place based frequency discrimination by traveling waves is a physical phenomenon that presumably evolved in mammals and bushcrickets independently.
Limiting Behavior of Travelling Waves for the Modified Degasperis-Procesi Equation
Directory of Open Access Journals (Sweden)
Jiuli Yin
2014-01-01
Full Text Available Using an improved qualitative method which combines characteristics of several methods, we classify all travelling wave solutions of the modified Degasperis-Procesi equation in specified regions of the parametric space. Besides some popular exotic solutions including peaked waves, and looped and cusped waves, this equation also admits some very particular waves, such as fractal-like waves, double stumpons, double kinked waves, and butterfly-like waves. The last three types of solutions have not been reported in the literature. Furthermore, we give the limiting behavior of all periodic solutions as the parameters trend to some special values.
Travelling Wave Structure of an SPS RF Cavity
CERN PhotoLab
1974-01-01
The RF cavities for acceleration of particles in the SPS have a travelling-wave structure. They operate at a fixed frequency of 200 MHz (h = 4620). With a quality factor of Q = 100, the bandwidth covers the small frequency swing for the acceleration of protons from as low as 10 GeV to the top energy of 450 GeV. Later on, for the acceleration of ions, with a larger frequency swing, turn-to-turn phase jumps did the trick. Two cavities, each consisting of 5 tank sections, were installed in long straight section 3. Each cavity is driven by a power amplifier of 750 kW CW (1 MW pulsed). Another 2 cavities were added later on. See also 7411033 and 7802190.
Traveling-wave device with mass flux suppression
Swift, Gregory W.; Backhaus, Scott N.; Gardner, David L.
2000-01-01
A traveling-wave device is provided with the conventional moving pistons eliminated. Acoustic energy circulates in a direction through a fluid within a torus. A side branch may be connected to the torus for transferring acoustic energy into or out of the torus. A regenerator is located in the torus with a first heat exchanger located on a first side of the regenerator downstream of the regenerator relative to the direction of the circulating acoustic energy; and a second heat exchanger located on an upstream side of the regenerator. The improvement is a mass flux suppressor located in the torus to minimize time-averaged mass flux of the fluid. In one embodiment, the device further includes a thermal buffer column in the torus to thermally isolate the heat exchanger that is at the operating temperature of the device.
Harmonic Generation in a Traveling-Wave Tube
Wong, Patrick; Zhang, Peng; Lau, Y. Y.; Greening, Geoffrey; Gilgenbach, Ronald; Chernin, David; Simon, David; Hoff, Brad
2016-10-01
Crowding of electron orbits in a traveling-wave tube (TWT) may lead to significant harmonic contents in the beam current, even in the linear regime. Here, we consider a wideband TWT that exhibits gain at the second harmonic. We analytically formulate equations governing the evolution of the generation of second harmonic, including axial variations of the Pierce parameters. The second harmonic output is phase-controlled by the input signal which consists only of a fundamental frequency. Several test cases are performed and compared with simulation using the CHRISTINE code. Reasonable agreement between theory and simulation is found. Work supported by AFOSR FA9550-15-1-0097, ONR N00014-16-1-2353, and L-3 Communications Electron Device Division.
TRAVELING WAVE SOLUTIONS OF SOME FRACTIONAL DIFFERENTIAL EQUATIONS
Directory of Open Access Journals (Sweden)
SERIFE MUGE EGE
2016-07-01
Full Text Available The modified Kudryashov method is powerful, efficient and can be used as an alternative to establish new solutions of different type of fractional differential equations applied in mathematical physics. In this article, we’ve constructed new traveling wave solutions including symmetrical Fibonacci function solutions, hyperbolic function solutions and rational solutions of the space-time fractional Cahn Hillihard equation D_t^α u − γD_x^α u − 6u(D_x^α u^2 − (3u^2 − 1D_x^α (D_x^α u + D_x^α(D_x^α(D_x^α(D_x^α u = 0 and the space-time fractional symmetric regularized long wave (SRLW equation D_t^α(D_t^α u + D_x^α(D_x^α u + uD_t^α(D_x^α u + D_x^α u D_t^α u + D_t^α(D_t^α(D_x^α(D_x^α u = 0 via modified Kudryashov method. In addition, some of the solutions are described in the figures with the help of Mathematica.
Recent developments in guided wave travel time tomography
Energy Technology Data Exchange (ETDEWEB)
Zon, Tim van; Volker, Arno [TNO, Stieltjesweg 1, P.O. box 155 2600 AD Delft (Netherlands)
2014-02-18
The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections. Guided wave tomography had been developed to create a map of the wall thickness using the travel times of guided waves. It can be used for both monitoring and for inspection of pipe-segments that are difficult to access, for instance at the location of pipe-supports. An important outcome of the tomography is the minimum remaining wall thickness, as this is critical in the scheduling of a replacement of the pipe-segment. In order to improve the sizing accuracy we have improved the tomography scheme. A number of major improvements have been realized allowing to extend the application envelope to pipes with a larger wall thickness and to larger distances between the transducer rings. Simulation results indicate that the sizing accuracy has improved and that is now possible to have a spacing of 8 meter between the source-ring and the receiver-ring. Additionally a reduction of the number of sensors required might be possible as well.
Dispersal, landscape and travelling waves in cyclic vole populations.
Berthier, Karine; Piry, Sylvain; Cosson, Jean-François; Giraudoux, Patrick; Foltête, Jean-Christophe; Defaut, Régis; Truchetet, Denis; Lambin, Xavier
2014-01-01
Travelling waves (TW) are among the most striking ecological phenomena emerging in oscillating populations. Despite much theory, understanding how real-world TW arise remains a challenge for ecology. Herein, we analyse 16-year time series of cyclic vole populations collected at 314 localities covering 2500 km² in France. We found evidence for a linear front TW spreading at a speed of 7.4 km year(-1) along a north-west/south-east direction and radiating away from a major landscape discontinuity as predicted by recent theory. The spatial signature of vole dispersal was assessed using genetic data collected at 14 localities. Both data sets were handled using similar autocorrelation approaches. Our results revealed a remarkable congruence of the spatial extent and direction of anisotropy of both demographic and genetic structures. Our results constitute the first empirical evidence that effective dispersal is limited in the direction of TW while most of the individual exchanges occur along the wave front. © 2013 John Wiley & Sons Ltd/CNRS.
Observation of the traveling component of an x-ray standing wave field
Energy Technology Data Exchange (ETDEWEB)
Lai, B.; Yun, W.B.; Chrzas, J.; Viccaro, P.J.
1994-03-01
We present the first systematic experimental study of the traveling component of a standing wave field, formed by interference of an incident beam with its specularly reflected part from a plane interface. The traveling component of the standing wave field propagates parallel to the interface and its existence manifests the dynamical aspect of the standing wave field. In our experiment, a multilayer structure was used to aid in the observation of the traveling wave component. The data measured are explained using a finite thickness diffraction grating model.
Travelling wave solutions of the generalized Benjamin-Bona-Mahony equation
Energy Technology Data Exchange (ETDEWEB)
Estevez, P.G. [Departamento de Fisica Fundamental, Area de Fisica Teorica, Universidad de Salamanca, 37008 Salamanca (Spain); Kuru, S. [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain); Department of Physics, Faculty of Science, Ankara University, 06100 Ankara (Turkey); Negro, J. [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain)], E-mail: jnegro@fta.uva.es; Nieto, L.M. [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain)
2009-05-30
A class of particular travelling wave solutions of the generalized Benjamin-Bona-Mahony equation is studied systematically using the factorization technique. Then, the general travelling wave solutions of Benjamin-Bona-Mahony equation, and of its modified version, are also recovered.
Synchronization of chaotic modulated travelling waves in coupled rotating annuli
Castrejon-Pita, Alfonso A.; Read, Peter L.
2010-05-01
Synchronization is now well established as a phenomenon where coherent behaviour between two or more otherwise autonomous nonlinear systems subject to some degree of coupling is developed and maintained. Such behaviour has mostly been studied to date, however, in relatively low-dimensional discrete numerical systems or networks, and very simple laboratory experiments. But the possibility of similar kinds of behaviour in continuous or extended spatiotemporal systems has many potential practical implications, especially in geophysics. Recent investigations have found that some atmospheric teleconnections of oscillatory climate phenomena can be better understood and analysed via chaos synchronization theory. The use of well-controlled laboratory analogues may therefore have an important role to play in the study of natural systems that can only be observed and for which controlled and repeatable experiments are impossible. The laboratory experiment that we use in our research is the thermally driven, rotating baroclinic annulus. The combined effect of differential heating in the horizontal direction and uniform background rotation leads to the formation of a zonally-symmetric jet flow around the annulus that may become unstable to travelling baroclinic waves and exhibit a wide range of flow regimes including steady amplitude travelling waves, periodic amplitude modulated waves and a range of more complex spatiotemporal flows, culminating in forms of geostrophic turbulence. Motivated in part by studies of quasi-periodic and chaotic ‘index cycles' in previous laboratory experiments using the baroclinic annulus, we have investigated synchronization effects in a pair of baroclinically unstable flows in both periodic and chaotic regimes, thermally coupled via their (zonally symmetric) boundary conditions. When the coupling strength and the de-tuning were systematically varied, the experiment showed clear signs of phase synchronization. By increasing or decreasing the
The (′/-Expansion Method for Abundant Traveling Wave Solutions of Caudrey-Dodd-Gibbon Equation
Directory of Open Access Journals (Sweden)
Hasibun Naher
2011-01-01
Full Text Available We construct the traveling wave solutions of the fifth-order Caudrey-Dodd-Gibbon (CDG equation by the (/-expansion method. Abundant traveling wave solutions with arbitrary parameters are successfully obtained by this method and the wave solutions are expressed in terms of the hyperbolic, the trigonometric, and the rational functions. It is shown that the (/-expansion method is a powerful and concise mathematical tool for solving nonlinear partial differential equations.
Classification of single travelling wave solutions to the generalized ...
Indian Academy of Sciences (India)
The investigation of exact solutions of nonlinear wave equations plays an important role in the study of nonlinear physical phenomena. Many authors started concentrating on researching the exact solutions of nonlinear wave equations [1,2]. For many nonlinear differential equations which can be directly reduced to the ...
Simons, Rainee N.; Wintucky, Edwin G.
2014-01-01
This paper presents the design and test results of a CW millimeter-wave satellite beacon source, based on the second harmonic from a traveling-wave tube amplifier and utilizes a novel waveguide multimode directional coupler. A potential application of the beacon source is for investigating the atmospheric effects on Q-band (37-42 GHz) and V/W-band (71- 76 GHz) satellite-to-ground signals.
Uni-directional waves over slowly varying bottom, part II: Deformation of travelling waves
Pudjaprasetya, S.R.; Pudjaprasetya, S.R.; van Groesen, Embrecht W.C.
1996-01-01
A new Korteweg-de Vries type of equation for uni-directional waves over slowly varying bottom has been derived in Part I. The equation retains the Hamiltonian structure of the underlying complete set of equations for surface waves. For flat bottom it reduces to the standard Korteweg-de Vries
Polymers for Traveling Wave Ion Mobility Spectrometry Calibration
Duez, Quentin; Chirot, Fabien; Liénard, Romain; Josse, Thomas; Choi, ChangMin; Coulembier, Olivier; Dugourd, Philippe; Cornil, Jérôme; Gerbaux, Pascal; De Winter, Julien
2017-07-01
One of the main issues when using traveling wave ion mobility spectrometry (TWIMS) for the determination of collisional cross-section (CCS) concerns the need for a robust calibration procedure built from referent ions of known CCS. Here, we implement synthetic polymer ions as CCS calibrants in positive ion mode. Based on their intrinsic polydispersities, polymers offer in a single sample the opportunity to generate, upon electrospray ionization, numerous ions covering a broad mass range and a large CCS window for different charge states at a time. In addition, the key advantage of polymer ions as CCS calibrants lies in the robustness of their gas-phase structure with respect to the instrumental conditions, making them less prone to collisional-induced unfolding (CIU) than protein ions. In this paper, we present a CCS calibration procedure using sodium cationized polylactide and polyethylene glycol, PLA and PEG, as calibrants with reference CCS determined on a home-made drift tube. Our calibration procedure is further validated by testing the polymer calibration to determine CCS of numerous different ions for which CCS are reported in the literature. [Figure not available: see fulltext.
Travelling Wave Magnetic Resonance Imaging at 3 Tesla
Vazquez, F; Marrufo, O; Rodriguez, A O
2013-01-01
Waveguides have been successfully used to generate magnetic resonance images at 7 T with whole-body systems. The bore limits the magnetic resonance signal transmitted because its specific cut-off frequency is greater than the majority of resonant frequencies. This restriction can be overcome by using a parallel-plate waveguide whose cut-off frequency is zero for the transversal electric modes and it can propagate any frequency. To investigate the potential benefits for whole-body imaging at 3 T, we compare numerical simulations at 1.5 T, 3 T, 7 T, and 9 T via the propagation of the parallel-plate waveguide principal mode filled with a cylindrical phantom and two surface coils. B1 mapping was computed to investigate the feasibility of this approach at 3T. The point spread function method was used to measure the imager performance for the traveling-wave magnetic resonance imaging experiment. Human leg images were acquired to experimentally validate this approach. The principal mode shows very little field magni...
Absolute Instability near Band Edges in a Traveling Wave Tube
Antoulinakis, Foivos; Lau, Y. Y.; Wong, Patrick; Jassem, Abhijit
2017-10-01
We re-examine the beam mode and its interaction with the circuit mode near the lower and upper band edges in a traveling wave tube. We find that an absolute instability may arise, according to the Briggs-Bers criterion, if the beam current is sufficiently high, even if the beam mode intersects with the circuit mode at a point in the (w, k) =(frequency, wavenumber) plane with a positive group velocity. This finding differs from the previous works for the lower band edge, and points to the vulnerability to absolute instabilities at both the upper and lower band edges of a TWT. When the threshold current is exceeded, the Green's function, at a fixed position, exponentiates in time as t**(1/3) initially, but as (wi*t) at later time, where wi is the imaginary part of w in the unstable pole-pinch root. Work supported by AFOSR Awards Nos. FA9550-14-1-0309, FA9550-15-1-0097, DARPA contract HR0011-16-C-0080 with Leidos, Inc., and L-3 Communications.
Travelling waves above the canopy of aquatic vegetation
Lyubimov, D.; Lyubimova, T.; Baidina, D.
2012-04-01
When fluid moves over a saturated porous medium with high permeability and porosity, the flow partially involves the fluid in porous medium, however, because of the great resistance force there arises sharp drop of tangential velocity. This leads to the development of instability similar to the Kelvin-Helmholtz instability on discontinuity surface of the tangential velocities of homogeneous fluids. Analogy becomes even more complete if we take into account the deformability of porous medium under the influence of pressure changes. Intensive vortices above the canopy of aquatic vegetation can lead to the coherent oscillations of vegetation, such traveling waves are called monami [1]. In the present paper we investigate stability of steady flow over a saturated porous medium. The importance of this problem is related to the applications to the dynamics of pollutants in the bottom layer of vegetation: the accumulation at low flow and salvo emissions with increasing velocity. We consider a two-layer system consisting of a layer of a viscous incompressible fluid and porous layer saturated with the same fluid located underneath. The lower boundary of the system is assumed to be rigid, the upper boundary - free and non-deformable. Weak slope of the river is taken into account. The problem is solved within the framework of single approach in which a two-layer system is described by a single system of equations for saturated porous medium and the presence of two layers is modeled by introducing variable permeability and porosity, depending on vertical coordinate. The flow in a saturated porous medium is described by the Brinkman model. Solution of the problem for steady flow shows that the velocity profile has two inflection points, which leads to the instability. The neutral curves are obtained for different values of the ratio d of porous layer thickness to full thickness. It is found that the dependence of critical Reynolds number on d is non-monotonic and the wave
Energy Technology Data Exchange (ETDEWEB)
Sun Tao; Morgan, Hywel; Green, Nicolas G [Nanoscale Systems Integration Group, School of Electronics and Computer Science, University of Southampton, SO17 1BJ (United Kingdom)], E-mail: ts04r@ecs.soton.ac.uk, E-mail: ng2@ecs.soton.ac.uk
2008-12-01
In AC electrokinetics, the application of an AC electric field to a suspension of particles results in the manipulation and separation of the particles also the movement of the fluid. One application is dielectrophoresis (DEP). The second effect is travelling wave dielectrophoresis (twDEP). This paper presents the analytical solutions of the dielectrophoretic and travelling wave forces for the interdigitated electrode arrays energised with either a two- or four-phase signal, respectively. The torque that rotates the particle in the four-phase travelling wave arrays is also analytically solved.
Theoretical Modeling and Implementation of Traveling Wave Sensor Based on PCB Coils
Directory of Open Access Journals (Sweden)
Zewen Li
2015-01-01
Full Text Available Based on analyzing characteristics of Rogowski coil, a new type of PCB traveling wave sensor with simple structure, high linearity, and anti-interference ability is proposed. The sensor has fine physical structure, which can effectively resist external electromagnetic interference by anti-interference measurement. In addition, it can greatly improve mutual inductance based on simple combinations. Simulations show that the new PCB traveling wave sensor can validly extract and deliver traveling wave signal and therefore realize fault location and protection accurately.
Some Further Results on Traveling Wave Solutions for the ZK-BBM( Equations
Directory of Open Access Journals (Sweden)
Shaoyong Li
2013-01-01
Full Text Available We investigate the traveling wave solutions for the ZK-BBM( equations by using bifurcation method of dynamical systems. Firstly, for ZK-BBM(2, 2 equation, we obtain peakon wave, periodic peakon wave, and smooth periodic wave solutions and point out that the peakon wave is the limit form of the periodic peakon wave. Secondly, for ZK-BBM(3, 2 equation, we obtain some elliptic function solutions which include periodic blow-up and periodic wave. Furthermore, from the limit forms of the elliptic function solutions, we obtain some trigonometric and hyperbolic function solutions which include periodic blow-up, blow-up, and smooth solitary wave. We also show that our work extends some previous results.
Directory of Open Access Journals (Sweden)
Md. Nur Alam
2014-03-01
Full Text Available The new approach of generalized (G′/G-expansion method is significant, powerful and straightforward mathematical tool for finding exact traveling wave solutions of nonlinear evolution equations (NLEEs arise in the field of engineering, applied mathematics and physics. Dispersive effects due to microstructure of materials combined with nonlinearities give rise to solitary waves. In this article, the new approach of generalized (G′/G-expansion method has been applied to construct general traveling wave solutions of the strain wave equation in microstructured solids. Abundant exact traveling wave solutions including solitons, kink, periodic and rational solutions have been found. These solutions might play important role in engineering fields.
Huang, Rui; Jin, Chunhua; Mei, Ming; Yin, Jingxue
2018-01-01
This paper deals with the existence and stability of traveling wave solutions for a degenerate reaction-diffusion equation with time delay. The degeneracy of spatial diffusion together with the effect of time delay causes us the essential difficulty for the existence of the traveling waves and their stabilities. In order to treat this case, we first show the existence of smooth- and sharp-type traveling wave solutions in the case of c≥c^* for the degenerate reaction-diffusion equation without delay, where c^*>0 is the critical wave speed of smooth traveling waves. Then, as a small perturbation, we obtain the existence of the smooth non-critical traveling waves for the degenerate diffusion equation with small time delay τ >0 . Furthermore, we prove the global existence and uniqueness of C^{α ,β } -solution to the time-delayed degenerate reaction-diffusion equation via compactness analysis. Finally, by the weighted energy method, we prove that the smooth non-critical traveling wave is globally stable in the weighted L^1 -space. The exponential convergence rate is also derived.
Mitsotakis, Dimitrios; Assylbekuly, Aydar; Zhakebaev, Dauren
2016-01-01
In this Letter we consider long capillary-gravity waves described by a fully nonlinear weakly dispersive model. First, using the phase space analysis methods we describe all possible types of localized travelling waves. Then, we especially focus on the critical regime, where the surface tension is exactly balanced by the gravity force. We show that our long wave model with a critical Bond number admits stable travelling wave solutions with a singular crest. These solutions are usually referred to in the literature as peakons or peaked solitary waves. They satisfy the usual speed-amplitude relation, which coincides with Scott-Russel's empirical formula for solitary waves, while their decay rate is the same regardless their amplitude. Moreover, they can be of depression or elevation type independent of their speed. The dynamics of these solutions are studied as well.
Travelling-wave solutions bifurcating from relative periodic orbits in plane Poiseuille flow
Rawat, Subhandu; Cossu, Carlo; Rincon, François
2016-06-01
Travelling-wave solutions are shown to bifurcate from relative periodic orbits in plane Poiseuille flow at Re = 2000 in a saddle-node infinite-period bifurcation. These solutions consist in self-sustaining sinuous quasi-streamwise streaks and quasi-streamwise vortices located in the bulk of the flow. The lower branch travelling-wave solutions evolve into spanwise localized states when the spanwise size Lz of the domain in which they are computed is increased. On the contrary, the upper branch of travelling-wave solutions develops multiple streaks when Lz is increased. Upper-branch travelling-wave solutions can be continued into coherent solutions to the filtered equations used in large-eddy simulations where they represent turbulent coherent large-scale motions.
Lunin, Andrei; Grudiev, Alexej
2011-01-01
Analytical solutions are derived for transient and steady state gradient distributions in the travelling wave accelerating structures with arbitrary variation of parameters over the structure length. The results of both the unloaded and beam loaded cases are presented.
Traveling Wave Solutions of ZK-BBM Equation Sine-Cosine Method
Directory of Open Access Journals (Sweden)
Sadaf Bibi
2014-03-01
Full Text Available Travelling wave solutions are obtained by using a relatively new technique which is called sine-cosine method for ZK-BBM equations. Solution procedure and obtained results re-confirm the efficiency of the proposed scheme.
Drábek, Pavel; Takáč, Peter
2017-02-14
We consider a one-dimensional population genetics model for the advance of an advantageous gene. The model is described by the semilinear Fisher equation with unbalanced bistable non-Lipschitzian nonlinearity f(u). The "nonsmoothness" of f allows for the appearance of travelling waves with a new, more realistic profile. We study existence, uniqueness, and long-time asymptotic behavior of the solutions u(x, t), [Formula: see text]. We prove also the existence and uniqueness (up to a spatial shift) of a travelling wave U. Our main result is the uniform convergence (for [Formula: see text]) of every solution u(x, t) of the Cauchy problem to a single travelling wave [Formula: see text] as [Formula: see text]. The speed c and the travelling wave U are determined uniquely by f, whereas the shift [Formula: see text] is determined by the initial data.
Traveling Waves for Nonlinear Schrödinger Equations with Nonzero Conditions at Infinity
Chiron, David; Mariş, Mihai
2017-10-01
We prove the existence of nontrivial finite energy traveling waves for a large class of nonlinear Schrödinger equations with nonzero conditions at infinity (includindg the Gross-Pitaevskii and the so-called "cubic-quintic" equations) in space dimension { N ≥ 2}. We show that minimization of the energy at fixed momentum can be used whenever the associated nonlinear potential is nonnegative and it gives a set of orbitally stable traveling waves, while minimization of the action at constant kinetic energy can be used in all cases. We also explore the relationship between the families of traveling waves obtained by different methods and we prove a sharp nonexistence result for traveling waves with small energy.
Development of gyrotron traveling-wave tubes at IAP and GYCOM
Samsonov, S. V.; Denisov, G. G.; Gachev, I. G.; Bogdashov, A. A.; Mishakin, S. V.; Manuilov, V. N.; Belousov, V. I.; Sobolev, D. I.; Sokolov, E. V.; Soluyanova, E. A.; Tai, E. M.
2017-08-01
A brief review of research activity on gyrotron traveling-wave tube amplifiers (gyro-TWTs) with helically corrugated waveguides developing by the Institute of Applied Physics and GYCOM (Nizhny Novgorod, Russia) will be presented.
Yasuda, Shugo
2015-01-01
A Monte Carlo simulation for the chemotactic bacteria is developed on the basis of the kinetic modeling, i.e., the Boltzmann transport equation, and applied to the one-dimensional traveling population wave in a micro channel.In this method, the Monte Carlo method, which calculates the run-and-tumble motions of bacteria, is coupled with a finite volume method to solve the macroscopic transport of the chemical cues in the field. The simulation method can successfully reproduce the traveling population wave of bacteria which was observed experimentally. The microscopic dynamics of bacteria, e.g., the velocity autocorrelation function and velocity distribution function of bacteria, are also investigated. It is found that the bacteria which form the traveling population wave create quasi-periodic motions as well as a migratory movement along with the traveling population wave. Simulations are also performed with changing the sensitivity and modulation parameters in the response function of bacteria. It is found th...
Dividing to unveil protein microheterogeneities: traveling wave ion mobility study.
Halgand, F; Habchi, Johnny; Cravello, Laetitia; Martinho, Marlène; Guigliarelli, Bruno; Longhi, Sonia
2011-10-01
Overexpression of a protein in a foreign host is often the only route toward an exhaustive characterization, especially when purification from the natural source(s) is hardly achievable. The key issue in these studies relies on quality control of the purified recombinant protein to precisely determining its identity as well as any undesirable microheterogeneities. While standard proteomics approaches preclude unbiased search for modifications, the optional technique of top-down tandem mass spectrometry (MSMS) requires the use of highly accurate and highly resolved experiments to reveal subtle sequence modifications. In the present study, the top-down MSMS approach combined with traveling wave ion mobility (TWIM) separation was evaluated for its ability to achieve high sequence coverage and to reveal subtle microheterogeneities that were hitherto only accessible with Fourier-transform ion cyclotron resonance-MS instruments. The power of this approach is herein illustrated in an in-depth analysis of both the wild type and K496C variant of the recombinant X domain (XD; aa's 459-507) of the measles virus phosphoprotein expressed in Escherichia coli . Using top-down MSMS combined with TWIM, we show that XD samples occasionally exhibit a microheterogeneity that could not be anticipated from the nucleotide sequence of the encoding constructs and that likely reflects a genetic drift, neutral or not, occurring during expression. In addition, a 1-oxyl-2,2,5,5-tetramethyl-δ3-pyrroline-3-methyl methanethiosulfonate nitroxide probe that was grafted onto the K496C XD variant was shown to undergo oxidation and/or protonation in the electrospray ionization source, leading to artifactual mass increases.
Longitudinal spread of mechanical excitation through tectorial membrane traveling waves.
Sellon, Jonathan B; Farrahi, Shirin; Ghaffari, Roozbeh; Freeman, Dennis M
2015-10-20
The mammalian inner ear separates sounds by their frequency content, and this separation underlies important properties of human hearing, including our ability to understand speech in noisy environments. Studies of genetic disorders of hearing have demonstrated a link between frequency selectivity and wave properties of the tectorial membrane (TM). To understand these wave properties better, we developed chemical manipulations that systematically and reversibly alter TM stiffness and viscosity. Using microfabricated shear probes, we show that (i) reducing pH reduces TM stiffness with little change in TM viscosity and (ii) adding PEG increases TM viscosity with little change in TM stiffness. By applying these manipulations in measurements of TM waves, we show that TM wave speed is determined primarily by stiffness at low frequencies and by viscosity at high frequencies. Both TM viscosity and stiffness affect the longitudinal spread of mechanical excitation through the TM over a broad range of frequencies. Increasing TM viscosity or decreasing stiffness reduces longitudinal spread of mechanical excitation, thereby coupling a smaller range of best frequencies and sharpening tuning. In contrast, increasing viscous loss or decreasing stiffness would tend to broaden tuning in resonance-based TM models. Thus, TM wave and resonance mechanisms are fundamentally different in the way they control frequency selectivity.
Reverse cochlear propagation in the intact cochlea of the gerbil: Evidence for slow traveling waves
S.W.F. Meenderink; M. van der Heijden (Marcel)
2010-01-01
textabstractThe inner ear can produce sounds, but how these otoacoustic emissions back-propagate through the cochlea is currently debated. Two opposing views exist: fast pressure waves in the cochlear fluids and slow traveling waves involving the basilar membrane. Resolving this issue requires
Alvarez, Roberto; van Hecke, Martin; van Saarloos, Wim
1996-01-01
In many pattern forming systems that exhibit traveling waves, sources and sinks occur which separate patches of oppositely traveling waves. We show that simple qualitative features of their dynamics can be compared to predictions from coupled amplitude equations. In heated wire convection experiments, we find a discrepancy between the observed multiplicity of sources and theoretical predictions. The expression for the observed motion of sinks is incompatible with any amplitude equation descri...
Energy Technology Data Exchange (ETDEWEB)
Mitsotakis, Dimitrios, E-mail: dmitsot@gmail.com [Victoria University of Wellington, School of Mathematics, Statistics and Operations Research, PO Box 600, Wellington 6140 (New Zealand); Dutykh, Denys, E-mail: Denys.Dutykh@univ-savoie.fr [LAMA, UMR 5127 CNRS, Université Savoie Mont Blanc, Campus Scientifique, F-73376 Le Bourget-du-Lac Cedex (France); Assylbekuly, Aydar, E-mail: asylbekuly@mail.ru [Khoja Akhmet Yassawi International Kazakh–Turkish University, Faculty of Natural Science, Department of Mathematics, 161200 Turkestan (Kazakhstan); Zhakebayev, Dauren, E-mail: daurjaz@mail.ru [Al-Farabi Kazakh National University, Faculty of Mechanics and Mathematics, Department of Mathematical and Computer Modelling, 050000 Almaty (Kazakhstan)
2017-05-25
In this Letter we consider long capillary–gravity waves described by a fully nonlinear weakly dispersive model. First, using the phase space analysis methods we describe all possible types of localized travelling waves. Then, we especially focus on the critical regime, where the surface tension is exactly balanced by the gravity force. We show that our long wave model with a critical Bond number admits stable travelling wave solutions with a singular crest. These solutions are usually referred to in the literature as peakons or peaked solitary waves. They satisfy the usual speed-amplitude relation, which coincides with Scott–Russel's empirical formula for solitary waves, while their decay rate is the same regardless their amplitude. Moreover, they can be of depression or elevation type independent of their speed. The dynamics of these solutions are studied as well. - Highlights: • A model for long capillary–gravity weakly dispersive and fully nonlinear water waves is derived. • Shallow capillary–gravity waves are classified using phase plane analysis. • Peaked travelling waves are found in the critical regime. • The dynamics of peakons in Serre–Green–Naghdi equations is studied numerically.
Computing the center of mass for traveling alpha waves in the human brain.
Manjarrez, Elías; Vázquez, Montserrat; Flores, Amira
2007-05-11
The phenomenon of traveling waves of the brain is an intriguing area of research, and its mechanisms and neurobiological bases have been unknown since the 1950s. The present study offers a new method to compute traveling alpha waves using the center of mass algorithm. Electroencephalographic alpha waves are oscillations with a characteristic frequency range and reactivity to closed eyes. Several lines of evidence derived from qualitative observations suggest that the alpha waves represent a spreading wave process with specific trajectories in the human brain. We found that during a certain alpha wave peak recorded with 30 electrodes the trajectory starts and ends in distinct regions of the brain, mostly frontal-occipital, frontal-frontal, or occipital-frontal, but the position of the trajectory at the time in which the maximal positivity of the alpha wave occurs has a definite position near the central regions. Thus we observed that the trajectory always crossed around the central zones, traveling from one region to another region of the brain. A similar trajectory pattern was observed for different alpha wave peaks in one alpha burst, and in different subjects, with a mean velocity of 2.1+/-0.29 m/s. We found that all our results were clear and reproducible in all of the subjects. To our knowledge, the present method documents the first explicit description of a spreading wave process with a singular pattern in the human brain in terms of the center of mass algorithm.
Travelling wave solutions to nonlinear physical models by means of ...
Indian Academy of Sciences (India)
NPDEs is an important and attractive research area. Not all NPDEs are integrable. For ... Thus, based on the qualitative theory of ordinary differential equations. [22], if we can find a single first .... Equation (29) has appeared in the study of qualitative behaviours of wave-breaking [27,. 28]. A peaked solution of the form u(x, ...
Exact travelling wave solutions for some important nonlinear ...
Indian Academy of Sciences (India)
problems. More precisely, there is no unified method that can be used to handle all types of nonlinear problems. A powerful and effective method for finding exact ... Explicit solutions to nonlinear problems are of fundamental importance. ... fluid dynamics, fluid flow, quantum field theory, electromagnetic waves and so on [7].
Dynamical behaviours and exact travelling wave solutions of ...
Indian Academy of Sciences (India)
2016-12-13
Dec 13, 2016 ... 2School of Mathematics and Statistics, Guizhou University of Finance and Economics, Guiyang,. Guizhou 550025, People's Republic of China. ∗. Corresponding author. ..... derivative of the wave function jumps down (or up) rapidly in a very short time interval. Lemma 2. [Existence of finite time interval of ...
A generic travelling wave solution in dissipative laser cavity
Indian Academy of Sciences (India)
2016-09-09
Sep 9, 2016 ... of solutions have been reported for the generalized. CGLE. In addition to stable stationary solutions, exact periodic and blow-up solutions have been derived using the homogeneous balance principle and Jacobi elliptic function. Peculiar results like periodic kink wave solu- tions, have been reported in ref.
Deng, Gao-Fu; Gao, Yi-Tian
2017-06-01
Under investigation in this paper is a generalized (3+1)-dimensional varible-coefficient nonlinear-wave equation, which has been presented for nonlinear waves in liquid with gas bubbles. The bilinear form, Bäcklund transformation, Lax pair and infinitely-many conservation laws are obtained via the binary Bell polynomials. One-, two- and three-soliton solutions are generated by virtue of the Hirota method. Travelling-wave solutions are derived with the aid of the polynomial expansion method. The one-periodic wave solutions are constructed by the Hirota-Riemann method. Discussions among the soliton, periodic- and travelling-wave solutions are presented: I) the soliton velocities are related to the variable coefficients, while the soliton amplitudes are unaffected; II) the interaction between the solitons is elastic; III) there are three cases of the travelling-wave solutions, i.e., the triangle-type periodical, bell-type and soliton-type travelling-wave solutions, while we notice that bell-type travelling-wave solutions can be converted into one-soliton solutions via taking suitable parameters; IV) the one-periodic waves approach to the solitary waves under some conditions and can be viewed as a superposition of overlapping solitary waves, placed one period apart.
TERRAPOWER, LLC TRAVELING WAVE REACTOR DEVELOPMENT PROGRAM OVERVIEW
Directory of Open Access Journals (Sweden)
PAVEL HEJZLAR
2013-11-01
Full Text Available Energy security is a topic of high importance to many countries throughout the world. Countries with access to vast energy supplies enjoy all of the economic and political benefits that come with controlling a highly sought after commodity. Given the desire to diversify away from fossil fuels due to rising environmental and economic concerns, there are limited technology options available for baseload electricity generation. Further complicating this issue is the desire for energy sources to be sustainable and globally scalable in addition to being economic and environmentally benign. Nuclear energy in its current form meets many but not all of these attributes. In order to address these limitations, TerraPower, LLC has developed the Traveling Wave Reactor (TWR which is a near-term deployable and truly sustainable energy solution that is globally scalable for the indefinite future. The fast neutron spectrum allows up to a ∼30-fold gain in fuel utilization efficiency when compared to conventional light water reactors utilizing enriched fuel. When compared to other fast reactors, TWRs represent the lowest cost alternative to enjoy the energy security benefits of an advanced nuclear fuel cycle without the associated proliferation concerns of chemical reprocessing. On a country level, this represents a significant savings in the energy generation infrastructure for several reasons 1 no reprocessing plants need to be built, 2 a reduced number of enrichment plants need to be built, 3 reduced waste production results in a lower repository capacity requirement and reduced waste transportation costs and 4 less uranium ore needs to be mined or purchased since natural or depleted uranium can be used directly as fuel. With advanced technological development and added cost, TWRs are also capable of reusing both their own used fuel and used fuel from LWRs, thereby eliminating the need for enrichment in the longer term and reducing the overall societal waste
Skin friction drag reduction in turbulent flow using spanwise traveling surface waves
Musgrave, Patrick F.; Tarazaga, Pablo A.
2017-04-01
A major technological driver in current aircraft and other vehicles is the improvement of fuel efficiency. One way to increase the efficiency is to reduce the skin friction drag on these vehicles. This experimental study presents an active drag reduction technique which decreases the skin friction using spanwise traveling waves. A novel method is introduced for generating traveling waves which is low-profile, non-intrusive, and operates under various flow conditions. This wave generation method is discussed and the resulting traveling waves are presented. These waves are then tested in a low-speed wind tunnel to determine their drag reduction potential. To calculate the drag reduction, the momentum integral method is applied to turbulent boundary layer data collected using a pitot tube and traversing system. The skin friction coefficients are then calculated and the drag reduction determined. Preliminary results yielded a drag reduction of ≍ 5% for 244Hz traveling waves. Thus, this novel wave generation method possesses the potential to yield an easily implementable, non-invasive drag reduction technology.
Orbital stability of periodic traveling-wave solutions for the log-KdV equation
Natali, Fábio; Pastor, Ademir; Cristófani, Fabrício
2017-09-01
In this paper we establish the orbital stability of periodic waves related to the logarithmic Korteweg-de Vries equation. Our motivation is inspired in the recent work [3], in which the authors established the well-posedness and the linear stability of Gaussian solitary waves. By using the approach put forward recently in [20] to construct a smooth branch of periodic waves as well as to get the spectral properties of the associated linearized operator, we apply the abstract theories in [13] and [25] to deduce the orbital stability of the periodic traveling waves in the energy space.
Vector control method applied to a traveling wave in a finite beam.
Giraud, Frédéric; Giraud-Audine, Christophe; Amberg, Michel; Lemaire-Semail, Betty
2014-01-01
This paper presents the closed-loop control of exciters to produce a traveling wave in a finite beam. This control is based on a dynamical modeling of the system established in a rotating reference frame. This method allows dynamic and independent control of the phase and amplitude of two vibration modes. The condition to obtain the traveling wave is written in this rotating frame, and requires having two vibration modes with the same amplitude, and imposing a phase shift of 90° between them. The advantage of the method is that it allows easy implementation of a closed loop control that can handle parameter drift of the system, after a temperature rise, for example. The modeling is compared with measurement on an experimental test bench which also implements real-time control. We managed to experimentally obtain a settling time of 250 ms for the traveling wave, and a standing wave ratio (SWR) of 1.3.
Acoustic tweezing of particles using decaying opposing travelling surface acoustic waves (DOTSAW).
Ng, Jia Wei; Devendran, Citsabehsan; Neild, Adrian
2017-10-11
Surface acoustic waves offer a versatile and biocompatible method of manipulating the location of suspended particles or cells within microfluidic systems. The most common approach uses the interference of identical frequency, counter propagating travelling waves to generate a standing surface acoustic wave, in which particles migrate a distance less than half the acoustic wavelength to their nearest pressure node. The result is the formation of a periodic pattern of particles. Subsequent displacement of this pattern, the prerequisite for tweezing, can be achieved by translation of the standing wave, and with it the pressure nodes; this requires changing either the frequency of the pair of waves, or their relative phase. Here, in contrast, we examine the use of two counterpropagating traveling waves of different frequency. The non-linearity of the acoustic forces used to manipulate particles, means that a small frequency difference between the two waves creates a substantially different force field, which offers significant advantages. Firstly, this approach creates a much longer range force field, in which migration takes place across multiple wavelengths, and causes particles to be gathered together in a single trapping site. Secondly, the location of this single trapping site can be controlled by the relative amplitude of the two waves, requiring simply an attenuation of one of the electrical drive signals. Using this approach, we show that by controlling the powers of the opposing incoherent waves, 5 μm particles can be migrated laterally across a fluid flow to defined locations with an accuracy of ±10 μm.
Behrens, Jan; Langelier, Sean; Rezk, Amgad R; Lindner, Gerhard; Yeo, Leslie Y; Friend, James R
2015-01-07
We present a versatile and very low-power traveling SAW microfluidic sorting device able to displace and separate particles of different diameter in aqueous suspension; the travelling wave propagates through the fluid bulk and diffuses via a Schröder diffuser, adapted from its typical use in concert hall acoustics to be the smallest such diffuser to be suitable for microfluidics. The effective operating power range is two to three orders of magnitude less than current SAW devices, uniquely eliminating the need for amplifiers, and by using traveling waves to impart forces directly upon suspended microparticles, they can be separated by size.
Travelling waves for a Frenkel-Kontorova chain
Buffoni, Boris; Schwetlick, Hartmut; Zimmer, Johannes
2017-08-01
In this article, the Frenkel-Kontorova model for dislocation dynamics is considered, where the on-site potential consists of quadratic wells joined by small arcs, which can be spinodal (concave) as commonly assumed in physics. The existence of heteroclinic waves-making a transition from one well of the on-site potential to another-is proved by means of a Schauder fixed point argument. The setting developed here is general enough to treat such a Frenkel-Kontorova chain with smooth (C2) on-site potential. It is shown that the method can also establish the existence of two-transition waves for a piecewise quadratic on-site potential.
Prestimulus amplitudes modulate P1 latencies and evoked traveling alpha waves
Directory of Open Access Journals (Sweden)
Nicole Alexandra Himmelstoss
2015-05-01
Full Text Available Traveling waves have been well documented in the ongoing, and more recently also in the evoked EEG. In the present study we investigate what kind of physiological process might be responsible for inducing an evoked traveling wave. We used a semantic judgment task which already proved useful to study evoked traveling alpha waves that coincide with the appearance of the P1 component. We found that the P1 latency of the leading electrode is significantly correlated with prestimulus amplitude size and that this event is associated with a transient change in alpha frequency. We assume that cortical background excitability, as reflected by an increase in prestimulus amplitude, is responsible for the observed change in alpha frequency and the initiation of an evoked traveling trajectory.
On exact traveling-wave solutions for local fractional Korteweg-de Vries equation
Yang, Xiao-Jun; Tenreiro Machado, J. A.; Baleanu, Dumitru; Cattani, Carlo
2016-08-01
This paper investigates the Korteweg-de Vries equation within the scope of the local fractional derivative formulation. The exact traveling wave solutions of non-differentiable type with the generalized functions defined on Cantor sets are analyzed. The results for the non-differentiable solutions when fractal dimension is 1 are also discussed. It is shown that the exact solutions for the local fractional Korteweg-de Vries equation characterize the fractal wave on shallow water surfaces.
Wintucky, Edwin G.; Simons, Rainee N.
2014-01-01
This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler fabricated from two dissimilar waveguides is capable of isolating the power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT). In addition to accurate power measurements at harmonic frequencies, a potential application of the MDC is in the design of a beacon source for atmospheric propagation studies at millimeter-wave frequencies.
On exact traveling-wave solutions for local fractional Korteweg-de Vries equation.
Yang, Xiao-Jun; Tenreiro Machado, J A; Baleanu, Dumitru; Cattani, Carlo
2016-08-01
This paper investigates the Korteweg-de Vries equation within the scope of the local fractional derivative formulation. The exact traveling wave solutions of non-differentiable type with the generalized functions defined on Cantor sets are analyzed. The results for the non-differentiable solutions when fractal dimension is 1 are also discussed. It is shown that the exact solutions for the local fractional Korteweg-de Vries equation characterize the fractal wave on shallow water surfaces.
Time-domain theory of gyrotron traveling wave amplifiers operating at grazing incidence
Energy Technology Data Exchange (ETDEWEB)
Ginzburg, N. S., E-mail: ginzburg@appl.sci-nnov.ru [Institute of Applied Physics of the Russian Academy of Sciences, 46, Ul' yanov St., Nizhny Novgorod (Russian Federation); Nizhny Novgorod State University, Gagarin Ave., 23, 603950 Nizhny Novgorod (Russian Federation); Sergeev, A. S.; Zotova, I. V.; Zheleznov, I. V. [Institute of Applied Physics of the Russian Academy of Sciences, 46, Ul' yanov St., Nizhny Novgorod (Russian Federation)
2015-01-15
Time-domain theory of the gyrotron traveling wave tube (gyro-TWT) operating at grazing incidence has been developed. The theory is based on a description of wave propagation by a parabolic equation. The results of the simulations are compared with experimental results of the observation of subnanosecond pulse amplification in a gyro-TWT consisting of three gain sections separated by severs. The theory developed can also be used successfully for a description of amplification of monochromatic signals.
Development of Traveling Wave Actuators Using Waveguides of Different Geometrical Forms
Directory of Open Access Journals (Sweden)
Ramutis Bansevicius
2016-01-01
Full Text Available The paper covers the research and development of piezoelectric traveling wave actuators using different types of the waveguides. The introduced piezoelectric actuators can be characterized by specific areas of application, different resolution, and torque. All presented actuators are ultrasonic resonant devices and they were developed to increase amplitudes of the traveling wave oscillations of the contact surface. Three different waveguides are introduced, that is, symmetrical, asymmetrical, and cone type waveguide. A piezoelectric ring with the sectioned electrodes is used to excite traveling wave oscillations for all actuators. Operating principle, electrode pattern, and excitation regimes of piezoelectric actuators are described. A numerical modelling of the actuators was performed to validate the operating principle and to calculate trajectories of the contact points motion. Prototype actuators were made and experimental study was performed. The results of numerical and experimental analysis are discussed.
Kim, Hyomin; Clauer, C. Robert; Gerrard, Andrew J.; Engebretson, Mark J.; Hartinger, Michael D.; Lessard, Marc R.; Matzka, Jürgen; Sibeck, David G.; Singer, Howard J.; Stolle, Claudia; Weimer, Daniel R.; Xu, Zhonghua
2017-07-01
We report on simultaneous observations of electromagnetic ion cyclotron (EMIC) waves associated with traveling convection vortex (TCV) events caused by transient solar wind dynamic pressure (Pd) impulse events. The Time History of Events and Macroscale Interactions during Substorms (THEMIS) spacecraft located near the magnetopause observed radial fluctuations of the magnetopause, and the GOES spacecraft measured sudden compressions of the magnetosphere in response to sudden increases in Pd. During the transient events, EMIC waves were observed by interhemispheric conjugate ground-based magnetometer arrays as well as the GOES spacecraft. The spectral structures of the waves appear to be well correlated with the fluctuating motion of the magnetopause, showing compression-associated wave generation. In addition, the wave features are remarkably similar in conjugate hemispheres in terms of bandwidth, quasiperiodic wave power modulation, and polarization. Proton precipitation was also observed by the DMSP spacecraft during the wave events, from which the wave source region is estimated to be 72°-74° in magnetic latitude, consistent with the TCV center. The confluence of space-borne and ground instruments including the interhemispheric, high-latitude, fluxgate/induction coil magnetometer array allows us to constrain the EMIC source region while also confirming the relationship between EMIC waves and the TCV current system.
Traveling Wave Solutions of Space-Time Fractional Generalized Fifth-Order KdV Equation
Directory of Open Access Journals (Sweden)
Dianchen Lu
2017-01-01
Full Text Available The Korteweg-de Vries (KdV equation, especially the fractional higher order one, provides a relatively accurate description of motions of long waves in shallow water under gravity and wave propagation in one-dimensional nonlinear lattice. In this article, the generalized exp(-Φ(ξ-expansion method is proposed to construct exact solutions of space-time fractional generalized fifth-order KdV equation with Jumarie’s modified Riemann-Liouville derivatives. At the end, three types of exact traveling wave solutions are obtained which indicate that the method is very practical and suitable for solving nonlinear fractional partial differential equations.
Tao, Zhi-Fu; Han, Zhong-Ling; Yao, Meng
2011-01-01
Using the difference of dielectric constant between malignant tumor tissue and normal breast tissue, breast tumor microwave sensor system (BRATUMASS) determines the detected target of imaging electromagnetic trait by analyzing the properties of target tissue back wave obtained after near-field microwave radicalization (conelrad). The key of obtained target properties relationship and reconstructed detected space is to analyze the characteristics of the whole process from microwave transmission to back wave reception. Using traveling wave method, we derive spatial transmission properties and the relationship of the relation detected points distances, and valuate the properties of each unit by statistical valuation theory. This chapter gives the experimental data analysis results.
Exact Traveling-Wave Solution for Local Fractional Boussinesq Equation in Fractal Domain
Yang, Xiao-Jun; Machado, J. A. Tenreiro; Baleanu, Dumitru
The new Boussinesq-type model in a fractal domain is derived based on the formulation of the local fractional derivative. The novel traveling wave transform of the non-differentiable type is adopted to convert the local fractional Boussinesq equation into a nonlinear local fractional ODE. The exact traveling wave solution is also obtained with aid of the non-differentiable graph. The proposed method, involving the fractal special functions, is efficient for finding the exact solutions of the nonlinear PDEs in fractal domains.
The existence of traveling wave solutions for a bistable three-component lattice dynamical system
Guo, Jong-Shenq; Wu, Chin-Chin
2016-01-01
We study the traveling wave solutions for a three-component lattice dynamical system. This problem arises in the modeling of three species competing two food resources in an environment with migration in which the habitat is one-dimensional and is divided into countable niches. We are concerned with the case when two species have different preferences of food and the third species has both preferences of food. To understand which species win the competition under the bistable condition, the existence of a traveling wave solution for this lattice dynamical system is proven.
Slip-stick excitation and travelling waves excite silo honking
Directory of Open Access Journals (Sweden)
Warburton Katarzyna
2017-01-01
Full Text Available Silo honking is the harmonic sound generated by the discharge of a silo filled with a granular material. In industrial storage silos, the acoustic emission during discharge of PET-particles forms a nuisance for the environment and may ultimately result in structural failure. This work investigates the phenomenon experimentally using a laboratory-scale silo, and successfully correlates the frequency of the emitted sound with the periodicity of the mechanical motion of the grains. The key driver is the slip-stick interaction between the wall and the particles, characterized as a wave moving upwards through the silo. A quantitative correlation is established for the first time between the frequency of the sound, measured with an electret microphone, and the slip-frequency, measured with a high-speed camera. In the lower regions of the tube, both the slip-stick motion and the honking sound disappear.
Human seizures couple across spatial scales through travelling wave dynamics
Martinet, L.-E.; Fiddyment, G.; Madsen, J. R.; Eskandar, E. N.; Truccolo, W.; Eden, U. T.; Cash, S. S.; Kramer, M. A.
2017-04-01
Epilepsy--the propensity toward recurrent, unprovoked seizures--is a devastating disease affecting 65 million people worldwide. Understanding and treating this disease remains a challenge, as seizures manifest through mechanisms and features that span spatial and temporal scales. Here we address this challenge through the analysis and modelling of human brain voltage activity recorded simultaneously across microscopic and macroscopic spatial scales. We show that during seizure large-scale neural populations spanning centimetres of cortex coordinate with small neural groups spanning cortical columns, and provide evidence that rapidly propagating waves of activity underlie this increased inter-scale coupling. We develop a corresponding computational model to propose specific mechanisms--namely, the effects of an increased extracellular potassium concentration diffusing in space--that support the observed spatiotemporal dynamics. Understanding the multi-scale, spatiotemporal dynamics of human seizures--and connecting these dynamics to specific biological mechanisms--promises new insights to treat this devastating disease.
Directory of Open Access Journals (Sweden)
Dong Wang
2015-01-01
Full Text Available The traditional polarity comparison based travelling wave protection, using the initial wave information, is affected by initial fault angle, bus structure, and external fault. And the relationship between the magnitude and polarity of travelling wave is ignored. Because of the protection tripping and malfunction, the further application of this protection principle is affected. Therefore, this paper presents an ultra-high-speed travelling wave protection using integral based polarity comparison principle. After empirical mode decomposition of the original travelling wave, the first-order intrinsic mode function is used as protection object. Based on the relationship between the magnitude and polarity of travelling wave, this paper demonstrates the feasibility of using travelling wave magnitude which contains polar information as direction criterion. And the paper integrates the direction criterion in a period after fault to avoid wave head detection failure. Through PSCAD simulation with the typical 500 kV transmission system, the reliability and sensitivity of travelling wave protection were verified under different factors’ affection.
Traveling Wave RF Systems for Helical Cooling Channels
Yonehara, K; Moretti, A; Popovic, M; Romanov, G; Neubauer, M; Johnson, R P; Thorndahl, L
2010-01-01
The great advantage of the helical ionization cooling channel (HCC) is its compact structure that enables the fast cooling of muon beam 6-dimensional phase space. This compact aspect requires a high average RF gradient, with few places that do not have cavities. Also, the muon beam is diffuse and requires an RF system with large transverse and longitudinal acceptance. A traveling wave system can address these requirements. First, the number of RF power coupling ports can be significantly reduced compared with our previous pillbox concept. Secondly, by adding a nose on the cell iris, the presence of thin metal foils traversed by the muons can possibly be avoided. We show simulations of the cooling performance of a traveling wave RF system in a HCC, including cavity geometries with inter-cell RF power couplers needed for power propagation.
Georgi, Howard
1993-01-01
The first complete introduction to waves and wave phenomena by a renowned theorist. Covers damping, forced oscillations and resonance; normal modes; symmetries; traveling waves; signals and Fourier analysis; polarization; diffraction.
Traveling wave solutions of the nonlinear Schrödinger equation
Akbari-Moghanjoughi, M.
2017-10-01
In this paper, we investigate the traveling soliton and the periodic wave solutions of the nonlinear Schrödinger equation (NLSE) with generalized nonlinear functionality. We also explore the underlying close connection between the well-known KdV equation and the NLSE. It is remarked that both one-dimensional KdV and NLSE models share the same pseudoenergy spectrum. We also derive the traveling wave solutions for two cases of weakly nonlinear mathematical models, namely, the Helmholtz and the Duffing oscillators' potentials. It is found that these models only allow gray-type NLSE solitary propagations. It is also found that the pseudofrequency ratio for the Helmholtz potential between the nonlinear periodic carrier and the modulated sinusoidal waves is always in the range 0.5 ≤ Ω/ω ≤ 0.537285 regardless of the potential parameter values. The values of Ω/ω = {0.5, 0.537285} correspond to the cnoidal waves modulus of m = {0, 1} for soliton and sinusoidal limits and m = 0.5, respectively. Moreover, the current NLSE model is extended to fully NLSE (FNLSE) situation for Sagdeev oscillator pseudopotential which can be derived using a closed set of hydrodynamic fluid equations with a fully integrable Hamiltonian system. The generalized quasi-three-dimensional traveling wave solution is also derived. The current simple hydrodynamic plasma model may also be generalized to two dimensions and other complex situations including different charged species and cases with magnetic or gravitational field effects.
Speed ot travelling waves in reaction-diffusion equations
Energy Technology Data Exchange (ETDEWEB)
Benguria, R.D.; Depassier, M.C. [Facultad de Fisica, Pontificia Universidad Catolica de Chile, Avda. Vicuna Mackenna 4860, Santiago (Chile); Mendez, V. [Facultat de Ciencies de la Salut, Universidad Internacional de Catalunya, Gomera s/n 08190 Sant Cugat del Valles, Barcelona (Spain)
2002-07-01
Reaction diffusion equations arise in several problems of population dynamics, flame propagation and others. In one dimensional cases the systems may evolve into travelling fronts. Here we concentrate on a reaction diffusion equation which arises as a simple model for chemotaxis and present results for the speed of the travelling fronts. (Author)
Existence of a directional Stokes drift in asymmetrical three-dimensional travelling gravity waves
Iooss, Gérard; Plotnikov, Pavel
2009-09-01
We consider periodic travelling gravity waves at the surface of an infinitely deep perfect fluid. The pattern is non-symmetric with respect to the propagation direction of the waves and we consider a general non-resonant situation. Defining a couple of amplitudes ɛ,ɛ along the basis of wave vectors which satisfy the dispersion relation, following Iooss and Plotnikov (2009), travelling waves exist with an asymptotic expansion in powers of ɛ,ɛ, for nearly all pair of angles made by the basic wave vectors with the critical propagation direction, and for values of the couple (ɛ12,ɛ22) in a subset of the plane, with asymptotic full measure at the origin. We prove the remarkable property that on the free surface, observed in the moving frame, the propagation direction of the waves differs from the asymptotic direction taken by fluid particles, by a small angle which is computed. To cite this article: G. Iooss, P. Plotnikov, C. R. Mecanique 337 (2009).
Baconneau, O.; van den Berg, G.J.B.; Brauner, C.-M.; Hulshof, J.
2004-01-01
We study travelling wave solutions of a one-dimensional two-phase Free Boundary Problem, which models premixed flames propagating in a gaseous mixture with dust. The model combines diffusion of mass and temperature with reaction at the flame front, the reaction rate being temperature dependent. The
The traveling-wave amplifier model of the cochlea adapted to dolphins
DEFF Research Database (Denmark)
Andersen, Lars Nonboe; Au, W.W.L.
1999-01-01
The traveling-wave amplifier (TWA) model of the cochlea [A. Hubbard, Science 259, 68–71 (1993)] has been shown to produce outputs that compare quite well with experimental data. A TWA model with parameters adjusted to fit the physiological properties of the dolphin cochlea was used as part...
Measurements on the SPS 200 MHz Travelling Wave Cavity towards an Impedance Model
Roggen, Toon; Caspers, Fritz; Vollinger, Christine; CERN. Geneva. ATS Department
2016-01-01
This note discusses the contribution of the SPS 200 MHz TWC (Travelling Wave Cavity) to the SPS longitudinal impedance model. The measurement method and setup is briefly explained and a comparison with simulations is discussed for both the fundamental pass band (FPB) as well as the Higher Order Modes (HOMs). In addition a number of improvements to the measurement setup are discussed.
Non-monotonic Travelling Wave Fronts in a System of Fractional Flow Equations from Porous Media
Zegeling, P.A.; Hönig, O.; Doster, F.; Hilfer, R.
2016-01-01
Motivated by observations of saturation overshoot, this article investigates generic classes of smooth travelling wave solutions of a system of two coupled nonlinear parabolic partial differential equations resulting from a flux function of high symmetry. All boundary resp. limit value problems of
A New Scheme for Experimental-Based Modeling of a Traveling Wave Ultrasonic Motor
DEFF Research Database (Denmark)
Mojallali, Hamed; Amini, R.; Izadi-Zamanabadi, Roozbeh
2005-01-01
In this paper, a new method for equivalent circuit modeling of a traveling wave ultrasonic motor is presented. The free stator of the motor is modeled by an equivalent circuit containing complex circuit elements. A systematic approach for identifying the elements of the equivalent circuit...
Travelling Waves of an n-Species Food Chain Model with Spatial Diffusion and Time Delays
Fei Hu; Yuyin Xu; Z. Wang; Wei Ding
2014-01-01
We investigate an n-species food chain model with spatial diffusion and time delays. By using Schauder’s fixed point theorem, we obtain the result about the existence of the travelling wave solutions of the food chain model with reaction term satisfying the partial quasimonotonicity conditions.
Travelling Waves of an n-Species Food Chain Model with Spatial Diffusion and Time Delays
Directory of Open Access Journals (Sweden)
Fei Hu
2014-01-01
Full Text Available We investigate an n-species food chain model with spatial diffusion and time delays. By using Schauder’s fixed point theorem, we obtain the result about the existence of the travelling wave solutions of the food chain model with reaction term satisfying the partial quasimonotonicity conditions.
Electromagnetic Excitation of a Thin Wire: A traveling-Wave Approach
Bogerd, J.C.; Tijhuis, A.G.; Klaasen, J.J.A.
1998-01-01
An approximate representation for the current along a perfectly conducting straight thin wire is presented. The current is approximated in terms of pulsed waves that travel along the wire with the velocity of the exterior medium. At the ends of the wire, these pulses are partially reflected, with a
MINIMIZING COMPUTATIONAL ERRORS OF TSUNAMI WAVE-RAY AND TRAVEL TIME
Directory of Open Access Journals (Sweden)
Andrei G. Marchuk
2008-01-01
Full Text Available There are many methods for computing tsunami kinematics directly and inversely. The direct detection of waves in the deep ocean makes it possible to establish tsunami source characteristics and origin. Thus, accuracy of computational methods is very important in obtaining reliable results. In a non-homogeneous medium where tsunami wave propagation velocity varies, it is not very easy to determine a wave-ray that connects two given points along a path. The present study proposes modification in the methodology of determining tsunami travel-times and of wave-ray paths. An approximate ray trace path can be developed from a source origin point to any other point on a computational grid by solving directly the problem - and thus obtain the tsunami travel- times. The initial ray approximation can be optimized with the use of an algorithm that calculates all potential variations and applies corrections to travel-time values. Such an algorithm was tested in an area with model bathymetry and compared with a non-optimized method. The latter exceeded the optimized method by one minute of travel-time for every hour of tsunami propagation time.
Global Existence of Solutions to the Fowler Equation in a Neighbourhood of Travelling-Waves
Directory of Open Access Journals (Sweden)
Afaf Bouharguane
2011-01-01
Full Text Available We investigate a fractional diffusion/anti-diffusion equation proposed by Andrew C. Fowler to describe the dynamics of sand dunes sheared by a fluid flow. In this paper, we prove the global-in-time well-posedness in the neighbourhood of travelling-waves solutions of the Fowler equation.
Periodic travelling waves in a non-integrable one-dimensional lattice
Valkering, T.P.
1982-01-01
The existence of a one-parameter family of periodic solutions representing longitudinal travelling waves is established for a one-dimensional lattice of identical particles with nearest-neighbour interaction. The potential is not given in closed form but is specified by only a few global properties.
The SPS acceleration system travelling wave drift-tube structure for the CERN SPS
Dôme, Georges
1976-01-01
The SPS accelerating structure is essentially a high energy proton linac, except for a small frequency swing during the acceleration cycle. It is operated almost CW with a travelling wave giving an energy gain around 0.1 MeV/m. The guide-lines for the design of such a structure are explained, and practical solutions are described. (3 refs).
Transverse kick in misaligned traveling wave structures driven at the fundamental mode
Energy Technology Data Exchange (ETDEWEB)
Whittum, D.H. [Stanford Univ., CA (US). Stanford Linear Accelerator Center; Henke, H. [Technical Univ. Berlin (Germany)
1998-04-01
Fabrication errors in traveling wave structures result in non-axisymmetric RF fields that couple to the rf drive at the fundamental mode frequency. The authors calculate the excitation of the dipole mode and the integrated effect on the beam, using the thin iris and small hole approximation.
Microwave heating offers a number of advantages over conventional heating methods, such as, rapid and volumetric heating, precise temperature control, energy efficiency and lower temperature gradient. In this article we demonstrate the use of 2450 MHz microwave traveling wave reactor to heat the cat...
Three-Dimensional Simulation of Traveling-Wave Tube Cold-Test Characteristics Using MAFIA
Kory, Carol L.; Wilson, Jeffrey D.
1995-01-01
The three-dimensional simulation code MAFIA was used to compute the cold-test parameters - frequency-phase dispersion, beam on-axis interaction impedance, and attenuation - for two types of traveling-wave tube (TWT) slow-wave circuits. The potential for this electromagnetic computer modeling code to reduce the time and cost of TWT development is demonstrated by the high degree of accuracy achieved in calculating these parameters. Generalized input files were developed for ferruled coupled-cavity and TunneLadder slow-wave circuits. These files make it easy to model circuits of arbitrary dimensions. The utility of these files was tested by applying each to a specific TWT slow-wave circuit and comparing the results with experimental data. Excellent agreement was obtained.
A review of atmospheric gravity waves and travelling ionospheric disturbances: 1982-1995
Directory of Open Access Journals (Sweden)
K. Hocke
Full Text Available Recent investigations of atmospheric gravity waves (AGW and travelling ionospheric disturbances (TID in the Earth's thermosphere and ionosphere are reviewed. In the past decade, the generation of gravity waves at high latitudes and their subsequent propagation to low latitudes have been studied by several global model simulations and coordinated observation campaigns such as the Worldwide Atmospheric Gravity-wave Study (WAGS, the results are presented in the first part of the review. The second part describes the progress towards understanding the AGW/TID characteristics. It points to the AGW/TID relationship which has been recently revealed with the aid of model-data comparisons and by the application of new inversion techniques. We describe the morphology and climatology of gravity waves and their ionospheric manifestations, TIDs, from numerous new observations.
A novel ultrasonic surface machining tool utilizing elastic traveling waves.
Ji, Ruinan; Jin, Jiamei; Wang, Liang; Zhang, Jianhui
2017-09-01
With the rapid development of modern industrial technology and high performance technology products, ultra-precision machining technology becomes increasingly important. However, joint clearance of kinematic pairs, lack of feeding accuracy and overlarge contact stress still limit the further improvement of ultra-precision machining technology. In this study, a novel surface machining method utilizing structural elastic waves was proposed, and a machining tool using the piezoelectric actuating principle was presented for verifying the proposed method. Two vibration modes with a phase shift of π/2 in both space and time domains are exited simultaneously in the elliptical motion of points on the structural surface. By means of adjusting driving signal parameters, such as frequency, voltage amplitude and phase shift, different machining performances could be achieved. The configuration and working vibration modes of the proposed machining tool were firstly calculated by the finite element method, and then the optimal working frequency of the machining tool prototype was determined by vibration characteristic experiments. At last, machining characteristic experiments were conducted to validate the proposed machining method. Experimental results showed that the minimum working contact force between the machining tool and workpiece was 1N, and the chipped depth of 1.93μm was achieved at the same contact force after machining for 5min. And at the conditions of the contact force of 6N, two driving voltages of 400V pp with a phase shift of π/2, and machining time of 5min, the prototype could achieve to machine the workpiece most efficiently and the roughness of the machined workpiece surface could be reached approximating 0.20μm. In conclusion, this proposed machining method could achieve a good quality machined surface with low residual stress and little damage by applying low contact force. Furthermore, it also had the advantage of no joint clearance error due to no
On the evaluation of Pierce parameters C and Q in a traveling wave tube
Simon, D. H.; Wong, P.; Chernin, D.; Lau, Y. Y.; Hoff, B.; Zhang, P.; Dong, C. F.; Gilgenbach, R. M.
2017-03-01
A study of an exactly solvable model of a traveling wave tube (TWT) shows that Pierce gain parameter C and space charge parameter Q generally depend on wavenumber k in addition to frequency ω. The choice of k at which C and Q are evaluated may strongly affect their values and, consequently, the values of the small signal gain obtained from 3- and 4-wave Pierce theory. In order to illustrate this effect, we calculate the spatial amplification rate, ki, from the exact dispersion relation for a dielectric TWT model which is exactly solvable. We compare this exact value of ki with approximate values obtained from Pierce's classical 3-wave and 4-wave dispersion relations, obtained by making various assumptions on k in the evaluation of C and Q. We find that the various ways to approximate C and Q will have a significant influence on the numerical values of ki. For our dielectric TWT example, Pierce's 4-wave TWT dispersion relation generally yields the most accurate values of ki if Q is evaluated for k = ω/v0, where v0 is the beam velocity, and if the complete frequency and wavelength dependence of C is retained. Pierce's 3-wave theory also yields accurate values of ki using a different form of Q from the 4-wave theory. The implications of this result for TWT design are explored.
Propagating neocortical gamma bursts are coordinated by traveling alpha waves
Bahramisharif, A.; Gerven, M.A.J. van; Aarnoutse, E.J.; Mercier, M.R.; Schwartz, T.H.; Foxe, J.J.; Ramsey, N.F.; Jensen, O.
2013-01-01
Neocortical neuronal activity is characterized by complex spatiotemporal dynamics. Although slow oscillations have been shown to travel over space in terms of consistent phase advances, it is unknown how this phenomenon relates to neuronal activity in other frequency bands. We here present
A rod type linear ultrasonic motor utilizing longitudinal traveling waves: proof of concept
Wang, Liang; Wielert, Tim; Twiefel, Jens; Jin, Jiamei; Wallaschek, Jörg
2017-08-01
This paper proposes a non-resonant linear ultrasonic motor utilizing longitudinal traveling waves. The longitudinal traveling waves in the rod type stator are generated by inducing longitudinal vibrations at one end of the waveguide and eliminating reflections at the opposite end by a passive damper. Considering the Poisson’s effect, the stator surface points move on elliptic trajectories and the slider is driven forward by friction. In contrast to many other flexural traveling wave linear ultrasonic motors, the driving direction of the proposed motor is identical to the wave propagation direction. The feasibility of the motor concept is demonstrated theoretically and experimentally. First, the design and operation principle of the motor are presented in detail. Then, the stator is modeled utilizing the transfer matrix method and verified by experimental studies. In addition, experimental parameter studies are carried out to identify the motor characteristics. Finally, the performance of the proposed motor is investigated. Overall, the results indicate very dynamic drive characteristics. The motor prototype achieves a maximum mean velocity of 115 mm s-1 and a maximum load of 0.25 N. Thereby, the start-up and shutdown times from the maximum speed are lower than 5 ms.
Directory of Open Access Journals (Sweden)
Yingxiang Liu
Full Text Available BACKGROUND: Ultrasonic motors (USM are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy. PRINCIPAL FINDINGS: A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses. CONCLUSIONS: The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn't an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.
Investigating Dielectric and Metamaterial Effects in a Terahertz Traveling-Wave Tube Amplifier
Starinshak, David P.; Wilson, Jeffrey D.
2008-01-01
Adding material enhancements to a terahertz traveling-wave tube amplifier is investigated. Isotropic dielectrics, negative-index metamaterials, and anisotropic crystals are simulated, and plans to increase the efficiency of the device are discussed. Early results indicate that adding dielectric to the curved sections of the serpentine-shaped slow-wave circuit produce optimal changes in the cold-test characteristics of the device and a minimal drop in operating frequency. Additional results suggest that materials with simultaneously small relative permittivities and electrical conductivities are best suited for increasing the efficiency of the device. More research is required on the subject, and recommendations are given to determine the direction.
Collective Transport for Active Matter Run and Tumble Disk Systems on a Traveling Wave Substrate
Sándor, Cs.; Libál, A.; Reichhardt, C.; Reichhardt, C. J. Olson
2016-01-01
We numerically examine the transport of an assembly of active run-and-tumble disks interacting with a traveling wave substrate. We show that as a function of substrate strength, wave speed, disk activity, and disk density, a variety of dynamical phases arise that are correlated with the structure and net flux of disks. We find that there is a sharp transition into a state where the disks are only partially coupled to the substrate and form a phase separated cluster state. This transition is a...
Astronomy's New Messengers: A traveling exhibit on gravitational-wave physics
Cavaglià, Marco; Hendry, Martin; Márka, Szabolcs; Reitze, David H.; Riles, Keith
2010-01-01
The Laser Interferometer Gravitational-wave Observatory exhibit Astronomy's New Messengers: Listening to the Universe with Gravitational Waves is traveling to colleges, universities, museums and other public institutions throughout the United States. Astronomy's New Messengers primarily communicates with an adolescent and young adult audience, potentially inspiring them into the field of science. Acknowledging that this audience is traditionally a difficult one to attract, the exhibit publicly announces itself in a charismatic fashion to reach its principal goals of broadening the community of people interested in science and encouraging interest in science among young people.
Christov, Ivan C
2012-01-01
In classical continuum physics, a wave is a mechanical disturbance. Whether the disturbance is stationary or traveling and whether it is caused by the motion of atoms and molecules or the vibration of a lattice structure, a wave can be understood as a specific type of solution of an appropriate mathematical equation modeling the underlying physics. Typical models consist of partial differential equations that exhibit certain general properties, e.g., hyperbolicity. This, in turn, leads to the possibility of wave solutions. Various analytical techniques (integral transforms, complex variables, reduction to ordinary differential equations, etc.) are available to find wave solutions of linear partial differential equations. Furthermore, linear hyperbolic equations with higher-order derivatives provide the mathematical underpinning of the phenomenon of dispersion, i.e., the dependence of a wave's phase speed on its wavenumber. For systems of nonlinear first-order hyperbolic equations, there also exists a general ...
Control of traveling-wave oscillations and bifurcation behavior in central pattern generators.
Landsman, Alexandra S; Slotine, Jean-Jacques
2012-10-01
Understanding synchronous and traveling-wave oscillations, particularly as they relate to transitions between different types of behavior, is a central problem in modeling biological systems. Here, we address this problem in the context of central pattern generators (CPGs). We use contraction theory to establish the global stability of a traveling-wave or synchronous oscillation, determined by the type of coupling. This opens the door to better design of coupling architectures to create the desired type of stable oscillations. We then use coupling that is both amplitude and phase dependent to create either globally stable synchronous or traveling-wave solutions. Using the CPG motor neuron network of a leech as an example, we show that while both traveling and synchronous oscillations can be achieved by several types of coupling, the transition between different types of behavior is dictated by a specific coupling architecture. In particular, it is only the "repulsive" but not the commonly used phase or rotational coupling that can explain the transition to high-frequency synchronous oscillations that have been observed in the heartbeat pattern generator of a leech. This shows that the overall dynamics of a CPG can be highly sensitive to the type of coupling used, even for coupling architectures that are widely believed to produce the same qualitative behavior.
Directory of Open Access Journals (Sweden)
Philippe Saltiel
2017-12-01
Full Text Available The central pattern generator (CPG architecture for rhythm generation remains partly elusive. We compare cat and frog locomotion results, where the component unrelated to pattern formation appears as a temporal grid, and traveling wave respectively. Frog spinal cord microstimulation with N-methyl-D-Aspartate (NMDA, a CPG activator, produced a limited set of force directions, sometimes tonic, but more often alternating between directions similar to the tonic forces. The tonic forces were topographically organized, and sites evoking rhythms with different force subsets were located close to the constituent tonic force regions. Thus CPGs consist of topographically organized modules. Modularity was also identified as a limited set of muscle synergies whose combinations reconstructed the EMGs. The cat CPG was investigated using proprioceptive inputs during fictive locomotion. Critical points identified both as abrupt transitions in the effect of phasic perturbations, and burst shape transitions, had biomechanical correlates in intact locomotion. During tonic proprioceptive perturbations, discrete shifts between these critical points explained the burst durations changes, and amplitude changes occurred at one of these points. Besides confirming CPG modularity, these results suggest a fixed temporal grid of anchoring points, to shift modules onsets and offsets. Frog locomotion, reconstructed with the NMDA synergies, showed a partially overlapping synergy activation sequence. Using the early synergy output evoked by NMDA at different spinal sites, revealed a rostrocaudal topographic organization, where each synergy is preferentially evoked from a few, albeit overlapping, cord regions. Comparing the locomotor synergy sequence with this topography suggests that a rostrocaudal traveling wave would activate the synergies in the proper sequence for locomotion. This output was reproduced in a two-layer model using this topography and a traveling wave
A traveling wave decelerator for neutral polar molecules.
Meek, Samuel A; Parsons, Maxwell F; Heyne, Georg; Platschkowski, Viktor; Haak, Henrik; Meijer, Gerard; Osterwalder, Andreas
2011-09-01
Recently, a decelerator for neutral polar molecules has been presented that operates on the basis of macroscopic, three-dimensional, traveling electrostatic traps [A. Osterwalder, S. A. Meek, G. Hammer, H. Haak, and G. Meijer, Phys. Rev. A 81, 051401 (2010)]. In the present paper, a complete description of this decelerator is given, with emphasis on the electronics and the mechanical design. Experimental results showing the transverse velocity distributions of guided molecules are shown and compared to trajectory simulations. An assessment of non-adiabatic losses is made by comparing the deceleration signals from (13)CO with those from (12)CO and with simulated signals. © 2011 American Institute of Physics
Directory of Open Access Journals (Sweden)
Koichi Narahara
2012-01-01
Full Text Available Nonlinear transmission lines, which define transmission lines periodically loaded with nonlinear devices such as varactors, diodes, and transistors, are modeled in the framework of finite-difference time-domain (FDTD method. Originally, some root-finding routine is needed to evaluate the contributions of nonlinear device currents appropriately to the temporally advanced electrical fields. Arbitrary nonlinear transmission lines contain large amount of nonlinear devices; therefore, it costs too much time to complete calculations. To reduce the calculation time, we recently developed a simple model of diodes to eliminate root-finding routines in an FDTD solver. Approximating the diode current-voltage relation by a piecewise-linear function, an extended Ampere's law is solved in a closed form for the time-advanced electrical fields. In this paper, we newly develop an FDTD model of field-effect transistors (FETs, together with several numerical examples that demonstrate pulse-shortening phenomena in a traveling-wave FET.
Doubly Periodic Traveling Waves in a Cellular Neural Network with Linear Reaction
Directory of Open Access Journals (Sweden)
Lin JianJhong
2009-01-01
Full Text Available Szekeley observed that the dynamic pattern of the locomotion of salamanders can be explained by periodic vector sequences generated by logical neural networks. Such sequences can mathematically be described by "doubly periodic traveling waves" and therefore it is of interest to propose dynamic models that may produce such waves. One such dynamic network model is built here based on reaction-diffusion principles and a complete discussion is given for the existence of doubly periodic waves as outputs. Since there are 2 parameters in our model and 4 a priori unknown parameters involved in our search of solutions, our results are nontrivial. The reaction term in our model is a linear function and hence our results can also be interpreted as existence criteria for solutions of a nontrivial linear problem depending on 6 parameters.
1.5 octave wideband traveling-wave tube with heavily-loaded helical slow-wave structure
Jung, S S; Han, S T; Jeon, S; Soukhov, A V; Park, G S
2001-01-01
Summary form only given. A 1.5 octave wideband traveling wave tube (TWT) with a helical structure loaded by the thick dielectric support rods has been designed and fabricated for the frequency range of 6-18 GHz. Helical slow-wave structure (SWS) was modeled using three- dimensional HFSS code. The nonresonant perturbation measurement using a thin copper wire with 20 mm diameter was performed to verify the phase velocity and interaction impedance of the helical structure. The performance of TWT was predicted using one-dimensional (1-D) nonlinear theory involving a macro particle beam model. The harmonic effect was considered in this calculation. The measured performance of TWT using a beam voltage 4 kV and a beam current of 120 mA was shown. These results were compared with a 1-D nonlinear theory. The comparison showed that the measured power and gain were less than the predicted one but had a similar trend over the operating frequency range. The 2nd harmonic levels at the low frequency range of 6-8 GHz were ne...
Integrable, oblique travelling waves in quasi-charge-neutral two-fluid plasmas
Directory of Open Access Journals (Sweden)
G. M. Webb
2008-02-01
Full Text Available A Hamiltonian description of oblique travelling waves in a two-fluid, charge-neutral, electron-proton plasma reveals that the transverse momentum equations for the electron and proton fluids are exactly integrable in cases where the total transverse momentum flux integrals, P_{y}^{(d} and P_{z}^{(d}, are both zero in the de Hoffman Teller (dHT frame. In this frame, the transverse electric fields are zero, which simplifies the transverse momentum equations for the two fluids. The integrable travelling waves for the case P_{y}^{(d}=P_{z}^{(d}=0, are investigated based on the Hamiltonian trajectories in phase space, and also on the longitudinal structure equation for the common longitudinal fluid velocity component u_{x} of the electron and proton fluids. Numerical examples of a variety of travelling waves in a cold plasma, including oscillitons, are used to illustrate the physics. The transverse, electron and proton velocity components u_{jy} and u_{jz} (j=e, p of the waves exhibit complex, rosette type patterns over several periods for u_{x}. The role of separatrices in the phase space, the rotational integral and the longitudinal structure equation on the different wave forms are discussed.
Feasibility of Traveling Wave Direct Energy Conversion of Fission Reaction Fragments
Tarditi, A. G.; George, J. A.; Miley, G. H.; Scott, J. H.
2013-01-01
Fission fragment direct energy conversion has been considered in the past for the purpose of increasing nuclear power plant efficiency and for advanced space propulsion. Since the fragments carry electric charge (typically in the order of 20 e) and have 100 MeV-range kinetic energy, techniques utilizing very high-voltage DC electrodes have been considered. This study is focused on a different approach: the kinetic energy of the charged fission fragments is converted into alternating current by means of a traveling wave coupling scheme (Traveling Wave Direct Energy Converter, TWDEC), thereby not requiring the utilization of high voltage technology. A preliminary feasibility analysis of the concept is introduced based on a conceptual level study and on a particle simulation model of the beam dynamics.
Traveling wave linear accelerator with RF power flow outside of accelerating cavities
Dolgashev, Valery A.
2016-06-28
A high power RF traveling wave accelerator structure includes a symmetric RF feed, an input matching cell coupled to the symmetric RF feed, a sequence of regular accelerating cavities coupled to the input matching cell at an input beam pipe end of the sequence, one or more waveguides parallel to and coupled to the sequence of regular accelerating cavities, an output matching cell coupled to the sequence of regular accelerating cavities at an output beam pipe end of the sequence, and output waveguide circuit or RF loads coupled to the output matching cell. Each of the regular accelerating cavities has a nose cone that cuts off field propagating into the beam pipe and therefore all power flows in a traveling wave along the structure in the waveguide.
A rotational traveling wave based levitation device - Modeling, design, and control
Gabai, Ran; Shaham, Ran; Cohen, Nadav; Bucher, Izhak
2016-01-01
Described is a device acting on an acoustically levitated object by manipulating the pressure and flow of a thin layer of air such that its rotation can be precisely controlled without mechanical contact. Virtual work analysis assists in simplifying the multi-actuator control problem into a problem governed by a controllable parameter. Actuation is done with a vibrating ring capable of producing ultrasonic standing and traveling waves, creating the acoustic excitation that affects the pressure in a thin, intermediate layer of gas. A distinctive vibration pattern is required to generate the temporal and spatial pressure field of the squeezed air layer that gives rise to both acoustic levitation force and rotational torque. Described are the physical and design development stages leading to an optimized structure, all followed by verifying and dynamics-calibration experiments. Moreover, by precisely controlling the ratio of standing and traveling waves in a closed-loop, one can affect the shear forces applied b...
Simulation studies on the standing and traveling wave thermoacoustic prime movers
Skaria, Mathew; Rasheed, K. K. Abdul; Shafi, K. A.; Kasthurirengan, S.; Behera, Upendra
2014-01-01
Thermoacoustic systems have been a focus of recent research due to its structural simplicity, high reliability due to absence of moving parts, and can be driven by low grade energy such as fuel, gas, solar energy, waste heat etc. There has been extensive research on both standing wave and traveling wave systems. Towards the development of such systems, simulations can be carried out by several methods such as (a) solving the energy equation, (b) enthalpy flow model, (c) DeltaEC, a free software available from LANL, USA (d) Computational Fluid Dynamics (CFD) etc. We present here the simulation studies of standing wave and traveling wave thermoacoustic prime movers using CFD and DeltaEC. The CFD analysis is carried out using Fluent 6.3.26, incorporating the necessary boundary conditions with different working fluids at different operating pressures. The results obtained by CFD are compared with those obtained using DeltaEC. Also, the CFD simulation of the thermoacoustically driven refrigerator is presented.
Yang, Zhiyong; Heeger, David J.; Blake, Randolph
2014-01-01
Traveling waves of cortical activity, in which local stimulation triggers lateral spread of activity to distal locations, have been hypothesized to play an important role in cortical function. However, there is conflicting physiological evidence for the existence of spreading traveling waves of neural activity triggered locally. Dichoptic stimulation, in which the two eyes view dissimilar monocular patterns, can lead to dynamic wave-like fluctuations in visual perception and therefore, provides a promising means for identifying and studying cortical traveling waves. Here, we used voltage-sensitive dye imaging to test for the existence of traveling waves of activity in the primary visual cortex of awake, fixating monkeys viewing dichoptic stimuli. We find clear traveling waves that are initiated by brief, localized contrast increments in one of the monocular patterns and then, propagate at speeds of ∼30 mm/s. These results demonstrate that under an appropriate visual context, circuitry in visual cortex in alert animals is capable of supporting long-range traveling waves triggered by local stimulation. PMID:25343785
Exact Traveling Wave Solutions for Wick-Type Stochastic Schamel KdV Equation
Directory of Open Access Journals (Sweden)
Hossam A. Ghany
2014-01-01
Full Text Available F-expansion method is proposed to seek exact solutions of nonlinear partial differential equations. By means of Hermite transform, inverse Hermite transform, and white noise analysis, the variable coefficients and Wick-type stochastic Schamel KdV equations are completely described. Abundant exact traveling wave solutions for variable coefficients Schamel KdV equations are given. These solutions include exact stochastic Jacobi elliptic functions, trigonometric functions, and hyperbolic functions solutions.
Traveling-Wave Tube Cold-Test Circuit Optimization Using CST MICROWAVE STUDIO
Chevalier, Christine T.; Kory, Carol L.; Wilson, Jeffrey D.; Wintucky, Edwin G.; Dayton, James A., Jr.
2003-01-01
The internal optimizer of CST MICROWAVE STUDIO (MWS) was used along with an application-specific Visual Basic for Applications (VBA) script to develop a method to optimize traveling-wave tube (TWT) cold-test circuit performance. The optimization procedure allows simultaneous optimization of circuit specifications including on-axis interaction impedance, bandwidth or geometric limitations. The application of Microwave Studio to TWT cold-test circuit optimization is described.
Tarditi, A. G.; Chap, A.; Wolinsky, J.; Scott, J. H.
2015-01-01
A coordinated experimental and theory/simulation effort has been carried out to investigate the physics of the Traveling Wave Direct Energy Converter (TWDEC), a scheme that has been proposed in the past for the direct conversion into electricity of the kinetic energy of an ion beam generated from fusion reactions. This effort has been focused in particular on the TWDEC process in the high density beam regime, thus accounting for the ion beam expansion due to its space charge.
Conservation Laws and Traveling Wave Solutions of a Generalized Nonlinear ZK-BBM Equation
Directory of Open Access Journals (Sweden)
Khadijo Rashid Adem
2014-01-01
Full Text Available We study a generalized two-dimensional nonlinear Zakharov-Kuznetsov-Benjamin-Bona-Mahony (ZK-BBM equation, which is in fact Benjamin-Bona-Mahony equation formulated in the ZK sense. Conservation laws for this equation are constructed by using the new conservation theorem due to Ibragimov and the multiplier method. Furthermore, traveling wave solutions are obtained by employing the (G'/G-expansion method.
Traveling Wave Solutions of Reaction-Diffusion Equations Arising in Atherosclerosis Models
Directory of Open Access Journals (Sweden)
Narcisa Apreutesei
2014-05-01
Full Text Available In this short review article, two atherosclerosis models are presented, one as a scalar equation and the other one as a system of two equations. They are given in terms of reaction-diffusion equations in an infinite strip with nonlinear boundary conditions. The existence of traveling wave solutions is studied for these models. The monostable and bistable cases are introduced and analyzed.
2D Traveling Wave Array Employing a Trapezoidal Dielectric Wedge for Beam Steering
Host, Nicholas K.; Chen, Chi-Chih; Volakis, John L.; Miranada, Felix A.
2014-01-01
This presentation addresses the progress made so far in the development of an antenna array with reconfigurable transmission line feeds connecting each element in series. In particular, 2D traveling wave array employing trapezoidal Dielectric Wedge for Beam Steering will be discussed. The presentation includes current status of the effort and suggested future work. The work is being done as part of the NASA Office of the Chief Technologist's Space Technology Research Fellowship (NSTRF).
Artur Wymysłowski; Waldemar Wiejak; Piotr Słupski
2017-01-01
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes and radar systems. TWT's seem to be an alternative and a more reliable solution than semiconductor devices when building high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. In fact, the standard TWT is treated as a high power device and the supp...
A travelling wave model of ripple formation on ion bombarded surfaces
Energy Technology Data Exchange (ETDEWEB)
Numazawa, Satoshi, E-mail: s.numazawa@hzdr.de; Smith, Roger, E-mail: R.Smith@lboro.ac.uk
2013-05-15
We present a mathematical model describing surface modification resulting from atomic motion after ion bombardment. The model considers only the defect production and recovery process induced by the local atom rearrangement and is essentially independent of surface topography changes formed by both sputtering and surface diffusion. A stable analytic, travelling wave solution is presented for a specific incident angle, which agrees with experimental observation excellently.
Analyses of the temperature field of traveling-wave rotary ultrasonic motors.
Lu, Xiaolong; Hu, Junhui; Zhao, Chunsheng
2011-12-01
In this paper, the transient and steady-state temperature field of a traveling-wave rotary ultrasonic motor is analyzed by the finite element method, based on a theoretical model of power loss of this motor in rated operation. Using this model, the temperature field of this motor is calculated and the effects of the heat conductivity of friction material, motor size, ambient temperature, and pressure on the temperature field are estimated. The calculated temperature distribution and transient temperature change agree with the experimental results. The variation of heat conductivity of the friction material has little effect on the minimum temperature in the motor but this variation seriously affects the maximum temperature in the motor when the heat conductivity of the friction material is lower than 0.5 W/(m°C). Two indices are defined to express the non-uniformity of temperature field and how quickly the temperature field reaches its steady state for traveling-wave ultrasonic motors of different sizes. It is found that traveling-wave ultrasonic motors with different sizes have different nonuniformity of temperature field and take different amounts of time to reach thermal steady state. The maximum temperature rise is lower when the ambient temperature is higher; the maximum temperature increases as the vacuum degree increases and it is not affected by the vacuum degree when the vacuum degree is too high (<10(-3) Pa).
A novel traveling wave piezoelectric actuated tracked mobile robot utilizing friction effect
Wang, Liang; Shu, Chengyou; Jin, Jiamei; Zhang, Jianhui
2017-03-01
A novel traveling wave piezoelectric-actuated tracked mobile robot with potential application to robotic rovers was proposed and investigated in this study. The proposed tracked mobile robot is composed of a parallelogram-frame-structure piezoelectric transducer with four rings and a metal track. Utilizing the converse piezoelectric and friction effects, traveling waves were propagated in the rings and then the metal track was actuated by the piezoelectric transducer. Compared with traditional tracked mechanisms, the proposed tracked mobile robot has a simpler and more compact structure without lubricant, which eliminates the problem of lubricant volatilization and deflation, thus, it could be operated in the vacuum environment. Dynamic characteristics were simulated and measured to reveal the mechanism of actuating track of the piezoelectric transducer. Experimental investigations of the traveling wave piezoelectric-actuated tracked mobile robot were then carried out, and the results indicated that the robot prototype with a pair of exciting voltages of 460 Vpp is able to achieve a maximum velocity of 57 mm s-1 moving on the foam plate and possesses the obstacle crossing capability with a maximum height of 27 mm. The proposed tracked mobile robot exhibits potential to be the driving system of robotic rovers.
Alexander, David M; Trengove, Chris; van Leeuwen, Cees
2015-11-01
An assumption nearly all researchers in cognitive neuroscience tacitly adhere to is that of space-time separability. Historically, it forms the basis of Donders' difference method, and to date, it underwrites all difference imaging and trial-averaging of cortical activity, including the customary techniques for analyzing fMRI and EEG/MEG data. We describe the assumption and how it licenses common methods in cognitive neuroscience; in particular, we show how it plays out in signal differencing and averaging, and how it misleads us into seeing the brain as a set of static activity sources. In fact, rather than being static, the domains of cortical activity change from moment to moment: Recent research has suggested the importance of traveling waves of activation in the cortex. Traveling waves have been described at a range of different spatial scales in the cortex; they explain a large proportion of the variance in phase measurements of EEG, MEG and ECoG, and are important for understanding cortical function. Critically, traveling waves are not space-time separable. Their prominence suggests that the correct frame of reference for analyzing cortical activity is the dynamical trajectory of the system, rather than the time and space coordinates of measurements. We illustrate what the failure of space-time separability implies for cortical activation, and what consequences this should have for cognitive neuroscience.
Travel at low energetic cost by swimming and wave-riding bottlenose dolphins.
Williams, T M; Friedl, W A; Fong, M L; Yamada, R M; Sedivy, P; Haun, J E
1992-02-27
Over the past 50 years there has been much speculation about the energetic cost of swimming and wave-riding by dolphins. When aligned properly in front of the bow of moving ships in the stern wake of small boats, on wind waves, and even in the wake of larger cetaceans, the animals appear to move effortlessly through the water without the benefit of propulsive strokes by the flukes. Theoretically, body streamlining as well as other anatomical and behavioural adaptations contribute to low transport costs in these animals. The economy of movement permitted by wave-riding has been perceived as an energetic advantage for the swimming dolphin, but has been hard to prove in the absence of physiological data for exercising cetaceans. Here we determine the aerobic and anaerobic costs of swimming and wave-riding in bottlenose dolphins and find that the minimum cost of transport for swimming dolphins is 1.29 +/- 0.05 J kg-1 m-1 at a cruising speed of 2.1 m s-1. Aerobic costs are nearly twice as high for swimming seals and sea lions, and 8-12 times higher for human swimmers. Wave-riding by dolphins provides additional benefits in terms of speed. The results indicate that behavioural, physiological and morphological factors make swimming an economical form of high-speed travel for dolphins.
National Research Council Canada - National Science Library
Zayed, E. M. E; Hoda Ibrahim, S. A; Abdelaziz, M. A. M
2012-01-01
The two variables ([superscript]G[variant prime][/superscript] /G,1/G) -expansion method is proposed in this paper to construct new exact traveling wave solutions with parameters of the nonlinear (3+1...
A nonlinear analysis of the terahertz serpentine waveguide traveling-wave amplifier
Energy Technology Data Exchange (ETDEWEB)
Li, Ke, E-mail: like.3714@163.com; Cao, Miaomiao, E-mail: mona486@yeah.net [Key Laboratory of High Power Microwave Sources and Technologies, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190 (China); Institute of Electronics, University of Chinese Academy of Sciences, Beijing 100190 (China); Liu, Wenxin, E-mail: lwenxin@mail.ie.ac.cn; Wang, Yong, E-mail: wangyong3845@sina.com [Key Laboratory of High Power Microwave Sources and Technologies, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190 (China)
2015-04-15
A nonlinear model for the numerical simulation of terahertz serpentine waveguide traveling-wave tube (SW-TWT) is described. In this model, the electromagnetic wave transmission in the SW is represented as an infinite set of space harmonics to interact with an electron beam. Analytical expressions for axial electric fields in axisymmetric interaction gaps of SW-TWTs are derived and compared with the results from CST simulation. The continuous beam is treated as discrete macro-particles with different initial phases. The beam-tunnel field equations, space-charge field equations, and motion equations are combined to solve the beam-wave interaction. The influence of backward wave and relativistic effect is also considered in the series of equations. The nonlinear model is used to design a 340 GHz SW-TWT. Several favorable comparisons of model predictions with results from a 3-D Particle-in-cell simulation code CHIPIC are presented, in which the output power versus beam voltage and interaction periods are illustrated. The relative error of the predicted output power is less than 15% in the 3 dB bandwidth and the relative error of the saturated length is less than 8%.The results show that the 1-D nonlinear analysis model is appropriate to solve the terahertz SW-TWT operation characteristics.
Simulation analysis of rectangular dielectric-loaded traveling wave amplifiers for THz sources
Directory of Open Access Journals (Sweden)
Changbiao Wang
2007-12-01
Full Text Available Nonlinear simulation results for a 220-GHz rectangular dielectric-loaded traveling-wave amplifier are presented. Simulations are used to check a linear theory that is developed by phenomenological introduction of an effective dielectric parameter for electron beam channel, and it is found that the rf power gains from Pierce three-wave theory and particle simulations are in reasonable agreement. It is shown that the rf power gain during initial beam-wave interaction is positive; the falling on the initial rf power profile, which has been thought to be the rf power transferred to the beam for bunching buildup (negative gain effect, is probably resulting from numerical errors. Beam-wave interaction mechanism is analyzed by examining the evolution of beam bunching centers. Influences of various parameters on amplifier performance are examined, and transverse space-charge effect is analyzed. A symmetric excitation scheme for rf couplers is proposed, and rf field jumps on the common intersection line of vacuum, dielectric, and metal wall, which were found in rf simulations, are explained theoretically.
Body wave travel times and amplitudes for present-day seismic model of Mars
Raevskiy, Sergey; Gudkova, Tamara
At the moment Martian interior structure models are constrained by the satellite observational data (the mass, the moment of inertia factor, the Love number k _{2}) (Konopliv et al., 2011) and high pressure experimental data (Bertka and Fei, 1997). Seismological observations could provide unparalleled capability for studying Martian interiors. Future missions include seismic experiments on Mars (Lognonné et al., 2012). The main instrument for these seismic experiments is a broadband seismometer (Robert et al., 2012). When seismic measurements are not yet available, physically consistent interior models, characterized by properties of relevant minerals, make possible to study of the seismic response of the planet. \\To estimate travel times for direct P, S, core reflected PcP, ScS and core refracted PKP body waves as a function of epicentral distance and hypocentral depth, as well as their amplitudes at the surface for a given marsquake, software product was developed in MatLab, as it encompasses many plotting routines that plot resulting travel times and ray paths. The computational results have been compared with the program TTBox (Knapmeyer, 2004). The code computes seismic ray paths and travel times for a one-dimentional spherical interior model (density and seismic velocities are functions of a radius only). Calculations of travel times tables for direct P, S, core reflected PcP, ScS and core refracted PKP waves and their amplitudes are carried out for a trial seismic model of Mars M14_3 from (Zharkov et al., 2009): the core radius is 1800 km, the thickness of the crust is 50 km. Direct and core reflected P and S waves are recorded to a maximum epicentral distance equal to about 100(°) , and PKP arrivals can be detected for epicental distances larger than 150(°) . The shadow zone is getting wider in comparison with previous results (Knapmeyer, 2010), as the liquid core radius of the seismic model under consideration is larger. Based on the estimates of
Bennett, James E. M.; Bair, Wyeth
2015-01-01
Traveling waves in the developing brain are a prominent source of highly correlated spiking activity that may instruct the refinement of neural circuits. A candidate mechanism for mediating such refinement is spike-timing dependent plasticity (STDP), which translates correlated activity patterns into changes in synaptic strength. To assess the potential of these phenomena to build useful structure in developing neural circuits, we examined the interaction of wave activity with STDP rules in simple, biologically plausible models of spiking neurons. We derive an expression for the synaptic strength dynamics showing that, by mapping the time dependence of STDP into spatial interactions, traveling waves can build periodic synaptic connectivity patterns into feedforward circuits with a broad class of experimentally observed STDP rules. The spatial scale of the connectivity patterns increases with wave speed and STDP time constants. We verify these results with simulations and demonstrate their robustness to likely sources of noise. We show how this pattern formation ability, which is analogous to solutions of reaction-diffusion systems that have been widely applied to biological pattern formation, can be harnessed to instruct the refinement of postsynaptic receptive fields. Our results hold for rich, complex wave patterns in two dimensions and over several orders of magnitude in wave speeds and STDP time constants, and they provide predictions that can be tested under existing experimental paradigms. Our model generalizes across brain areas and STDP rules, allowing broad application to the ubiquitous occurrence of traveling waves and to wave-like activity patterns induced by moving stimuli. PMID:26308406
A near-quantum-limited Josephson traveling-wave parametric amplifier.
Macklin, C; O'Brien, K; Hover, D; Schwartz, M E; Bolkhovsky, V; Zhang, X; Oliver, W D; Siddiqi, I
2015-10-16
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics. Copyright © 2015, American Association for the Advancement of Science.
Theory of a Traveling Wave Feed for a Planar Slot Array Antenna
Rengarajan, Sembiam
2012-01-01
Planar arrays of waveguide-fed slots have been employed in many radar and remote sensing applications. Such arrays are designed in the standing wave configuration because of high efficiency. Traveling wave arrays can produce greater bandwidth at the expense of efficiency due to power loss in the load or loads. Traveling wave planar slot arrays may be designed with a long feed waveguide consisting of centered-inclined coupling slots. The feed waveguide is terminated in a matched load, and the element spacing in the feed waveguide is chosen to produce a beam squinted from the broadside. The traveling wave planar slot array consists of a long feed waveguide containing resonant-centered inclined coupling slots in the broad wall, coupling power into an array of stacked radiating waveguides orthogonal to it. The radiating waveguides consist of longitudinal offset radiating slots in a standing wave configuration. For the traveling wave feed of a planar slot array, one has to design the tilt angle and length of each coupling slot such that the amplitude and phase of excitation of each radiating waveguide are close to the desired values. The coupling slot spacing is chosen for an appropriate beam squint. Scattering matrix parameters of resonant coupling slots are used in the design process to produce appropriate excitations of radiating waveguides with constraints placed only on amplitudes. Since the radiating slots in each radiating waveguide are designed to produce a certain total admittance, the scattering (S) matrix of each coupling slot is reduced to a 2x2 matrix. Elements of each 2x2 S-matrix and the amount of coupling into the corresponding radiating waveguide are expressed in terms of the element S11. S matrices are converted into transmission (T) matrices, and the T matrices are multiplied to cascade the coupling slots and waveguide sections, starting from the load end and proceeding towards the source. While the use of non-resonant coupling slots may provide an
Standing and travelling waves in a spherical brain model: The Nunez model revisited
Visser, S.; Nicks, R.; Faugeras, O.; Coombes, S.
2017-06-01
The Nunez model for the generation of electroencephalogram (EEG) signals is naturally described as a neural field model on a sphere with space-dependent delays. For simplicity, dynamical realisations of this model either as a damped wave equation or an integro-differential equation, have typically been studied in idealised one dimensional or planar settings. Here we revisit the original Nunez model to specifically address the role of spherical topology on spatio-temporal pattern generation. We do this using a mixture of Turing instability analysis, symmetric bifurcation theory, centre manifold reduction and direct simulations with a bespoke numerical scheme. In particular we examine standing and travelling wave solutions using normal form computation of primary and secondary bifurcations from a steady state. Interestingly, we observe spatio-temporal patterns which have counterparts seen in the EEG patterns of both epileptic and schizophrenic brain conditions.
A computational role for bistability and traveling waves in motor cortex
Directory of Open Access Journals (Sweden)
Stewart eHeitmann
2012-09-01
Full Text Available Adaptive changes in behavior require rapid changes in brain states yet the brain must also remain stable. We investigated two neural mechanisms for evoking rapid transitions between spatiotemporal synchronization patterns of beta oscillations (13--30Hz in motor cortex. Cortex was modeled as a sheet of neural oscillators that were spatially coupled using a center-surround connection topology. Manipulating the inhibitory surround was found to evoke reliable transitions between synchronous oscillation patterns and traveling waves. These transitions modulated the simulated local field potential in agreement with physiological observations in humans. Intermediate levels of surround inhibition were also found to produce bistable coupling topologies that supported both waves and synchrony. State-dependent perturbation between bistable states produced very rapid transitions but were less reliable. We surmise that motor cortex may thus employ state-dependent computation to achieve very rapid changes between bistable motor states when the demand for speed exceeds the demand for accuracy.
Paraskevov, A. V.; Zendrikov, D. K.
2017-04-01
We show that in model neuronal cultures, where the probability of interneuronal connection formation decreases exponentially with increasing distance between the neurons, there exists a small number of spatial nucleation centers of a network spike, from where the synchronous spiking activity starts propagating in the network typically in the form of circular traveling waves. The number of nucleation centers and their spatial locations are unique and unchanged for a given realization of neuronal network but are different for different networks. In contrast, if the probability of interneuronal connection formation is independent of the distance between neurons, then the nucleation centers do not arise and the synchronization of spiking activity during a network spike occurs spatially uniform throughout the network. Therefore one can conclude that spatial proximity of connections between neurons is important for the formation of nucleation centers. It is also shown that fluctuations of the spatial density of neurons at their random homogeneous distribution typical for the experiments in vitro do not determine the locations of the nucleation centers. The simulation results are qualitatively consistent with the experimental observations.
Bani-Hani, M. A.; Karami, M. A.
2015-09-01
This paper presents vibration analysis and structural optimization of a swimming-morphing structure. The swimming of the structure is achieved by utilization of piezoelectric patches to generate traveling waves. The third mode shape of the structure in the longitudinal direction resembles the body waveform of a swimming eel. After swimming to its destination, the morphing structure changes shape from an open box to a cube using shape memory alloys (SMAs). The SMAs used for the configuration change of the box robot cannot be used for swimming since they fail to operate at high frequencies. Piezoelectric patches are actuated at the third natural frequency of the structure. We optimize the thickness of the panels and the stiffness of the springs at the joints to generate swimming waveforms that most closely resemble the body waveform of an eel. The traveling wave is generated using two piezoelectric sets of patches bonded to the first and last segments of the beams in the longitudinal direction. Excitation of the piezoelectric results in coupled system dynamics equations that can be translated into the generation of waves. Theoretical analysis based on the distributed parameter model is conducted in this paper. A scalar measure of the traveling to standing wave ratio is introduced using a 2-dimensional Fourier transform (2D-FFT) of the body deformation waveform. An optimization algorithm based on tuning the flexural transverse wave is established to obtain a higher traveling to standing wave ratio. The results are then compared to common methods in the literature for assessment of standing to traveling wave ratios. The analytical models are verified by the close agreement between the traveling waves predicted by the model and those measured in the experiments.
The existence of minimum speed of traveling wave solutions to a non-KPP isothermal diffusion system
Chen, Xinfu; Liu, Guirong; Qi, Yuanwei
2017-08-01
The reaction-diffusion system at =axx - abn ,bt = Dbxx + abn, where n ≥ 1 and D > 0, arises from many real-world chemical reactions. Whereas n = 1 is the KPP type nonlinearity, which is much studied and very important results obtained in literature not only in one dimensional spatial domains, but also multi-dimensional spaces, but n > 1 proves to be much harder. One of the interesting features of the system is the existence of traveling wave solutions. In particular, for the traveling wave solution a (x , t) = a (x - vt), b (x , t) = b (x - vt), where v > 0, if we fix lim x → - ∞ (a , b) = (0 , 1) it was proved by many authors with different bounds v* (n , D) > 0 such that a traveling wave solution exists for any v ≥v* when n > 1. For the latest progress, see [7]. That is, the traveling wave problem exhibits the mono-stable phenomenon for traveling wave of scalar equation ut =uxx + f (u) with f (0) = f (1) = 0, f (u) > 0 in (0 , 1) and, u = 0 is unstable and u = 1 is stable. A natural and significant question is whether, like the scalar case, there exists a minimum speed. That is, whether there exists a minimum speed vmin > 0 such that traveling wave solution of speed v exists iff v ≥vmin? This is an open question, in spite of many works on traveling wave of the system in last thirty years. This is duo to the reason, unlike the KPP case, the minimum speed cannot be obtained through linear analysis at equilibrium points (a , b) = (0 , 1) and (a , b) = (1 , 0). In this work, we give an affirmative answer to this question.
Simulation of TunneLadder Traveling-Wave Tube Input/Output Coupler Characteristics Using MAFIA
Kory, Carol L.; Qureshi, A. Haq
1996-01-01
RF input/output coupler characteristics for the TunneLadder traveling-wave tube have been calculated using the three-dimensional computer code, MAFIA and compared to experimental data with good agreement. Theory behind coupling of the TunneLadder interaction circuit to input and output waveguides is presented and VSWR data is calculated for variations on principal coupler dimensions to provide insight into manufacturing tolerances necessary for acceptable performance. Accuracy of results using MAFIA demonstrates how experimental hardware testing of three-dimensional coupler designs can be reduced.
An interleaved structure for a high-voltage planar transformer for a Travelling-wave Tube
DEFF Research Database (Denmark)
Zhao, Bin; Wang, Gang; Hurley, William G.
2016-01-01
is proposed to reduce leakage inductance and the insulation’s thickness is adjusted to optimize the electric isolation. In addition, the resistance and parasitic capacitance are investigated. With this method, a planar transformer used for a Travelling-Wave Tube Amplifier (TWTA) is designed. Calculations......Fully interleaved structure can significantly reduce leakage inductance in transformers, However， it is hard to apply them into high-voltage applications due to the electric insulation. In this paper, a partially interleaved structure that is suitable for high-voltage high frequency applications...
Asymptotics of QCD traveling waves with fluctuations and running coupling effects
Beuf, Guillaume
2008-09-01
Extending the Balitsky-Kovchegov (BK) equation independently to running coupling or to fluctuation effects due to pomeron loops is known to lead in both cases to qualitative changes of the traveling-wave asymptotic solutions. In this paper we study the extension of the forward BK equation, including both running coupling and fluctuations effects, extending the method developed for the fixed coupling case [E. Brunet, B. Derrida, A.H. Mueller, S. Munier, Phys. Rev. E 73 (2006) 056126, cond-mat/0512021]. We derive the exact asymptotic behavior in rapidity of the probabilistic distribution of the saturation scale.
Investigation of a traveling wave thermoacoustic engine in a looped-tube
Directory of Open Access Journals (Sweden)
Novotný Petr
2014-03-01
Full Text Available In the present paper, four configurations of a traveling wave thermoacoustic engine in a looped tube were investigated by means of theoretical calculations and experiments. The effect of natural heat convection on their functionality was observed. Acoustic intensity was measured using a dual two microphone method. The stack was designed with few times higher dimension of channels than thermal penetration depth, due to the stack should not be called regenerator. Pressure distribution in the resonator was measured, and a good agreement with theoretical calculations from DELTAEC has been demonstrated.
Non-cooperative Fisher–KPP systems: traveling waves and long-time behavior
Girardin, Léo
2018-01-01
This paper is concerned with non-cooperative parabolic reaction–diffusion systems which share structural similarities with the scalar Fisher–KPP equation. These similarities make it possible to prove, among other results, an extinction and persistence dichotomy and, when persistence occurs, the existence of a positive steady state, the existence of traveling waves with a half-line of possible speeds and a positive minimal speed and the equality between this minimal speed and the spreading speed for the Cauchy problem. Non-cooperative KPP systems can model various phenomena where the following three mechanisms occur: local diffusion in space, linear cooperation and superlinear competition.
Monthus, Cecile; Garel, Thomas
2008-01-01
For Anderson localization on the Cayley tree, we study the statistics of various observables as a function of the disorder strength $W$ and the number $N$ of generations. We first consider the Landauer transmission $T_N$. In the localized phase, its logarithm follows the traveling wave form $\\ln T_N \\simeq \\bar{\\ln T_N} + \\ln t^*$ where (i) the disorder-averaged value moves linearly $\\bar{\\ln (T_N)} \\simeq - \\frac{N}{\\xi_{loc}}$ and the localization length diverges as $\\xi_{loc} \\sim (W-W_c)^...
An Exact Hot-Tube Solution For Thin Tape Helix Traveling-Wave Tube
Wong, Patrick; Lau, Y. Y.; Gilgenbach, Ronald; Chernin, David; Hoff, Brad
2017-10-01
The exact hot-tube dispersion relation for a thin tape helix traveling-wave tube (TWT) is derived for the first time, based on its exact cold-tube solution. This is an attempt to provide a reliable determination of the Pierce parameters, in particular the ``AC space-charge'' parameter QC, for a realistic TWT. The determination of QC remains an outstanding issue. The numerical results from the exact formulation will be compared with other approximate models of TWT that were commonly used in the literature for QC. This work was supported by AFOSR Grant No. FA9550-15-1-0097.
Exact Travelling Wave Solutions of two Important Nonlinear Partial Differential Equations
Kim, Hyunsoo; Bae, Jae-Hyeong; Sakthivel, Rathinasamy
2014-04-01
Coupled nonlinear partial differential equations describing the spatio-temporal dynamics of predator-prey systems and nonlinear telegraph equations have been widely applied in many real world problems. So, finding exact solutions of such equations is very helpful in the theories and numerical studies. In this paper, the Kudryashov method is implemented to obtain exact travelling wave solutions of such physical models. Further, graphic illustrations in two and three dimensional plots of some of the obtained solutions are also given to predict their behaviour. The results reveal that the Kudryashov method is very simple, reliable, and effective, and can be used for finding exact solution of many other nonlinear evolution equations.
Integrating a Traveling Wave Tube into an AECR-U ion source
Energy Technology Data Exchange (ETDEWEB)
Covo, Michel Kireeff; Benitez, Janilee Y.; Ratti, Alessandro; Vujic, Jasmina L.
2011-07-01
An RF system of 500W - 10.75 to 12.75 GHz was designed and integrated into the Advanced Electron Cyclotron Resonance - Upgrade (AECR-U) ion source of the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. The AECR-U produces ion beams for the Cyclotron giving large flexibility of ion species and charge states. The broadband frequency of a Traveling Wave Tube (TWT) allows modifying the volume that couples and heats the plasma. The TWT system design and integration with the AECR-U ion source and results from commissioning are presented.
Watt-Meyer, O.; Kushner, P. J.
2015-12-01
The winter season over North America during 2013/14 was dominated by a persistent ridge-trough that brought warm and dry conditions to the southwestern U.S., and markedly cold temperatures to central and eastern North America [Wang et al., 2014; Hartmann, 2015]. In addition, several cold air outbreaks occurred during the winter season, the strongest of which was around 7 January 2014 and led to minimum daily temperature records being set at many weather stations including Atlanta, Austin, Chicago and New York [Screen et al., in press]. This study uses a novel decomposition of wave variability into standing and travelling components [Watt-Meyer and Kushner, 2015] to diagnose the anomalous circulation of the 2013/14 winter season. This spectral decomposition is an improvement on previous methods because it explicitly accounts for the covariance between standing and travelling waves, and because the real-space components of the signal can be easily reconstructed. An index representing the ridge-trough dipole is computed using mid-tropospheric heights and shown to be well correlated with surface temperatures over central and eastern North America. The contributions to this dipole index from standing waves, westward travelling waves, and eastward travelling waves are calculated. The analysis demonstrates that the cold air outbreak of 7 January 2014 was driven by a synoptic wave of record breaking amplitude intensifying a persistent background amplification of the typical ridge-trough structure seen during North American winter.
Spoor, Philip S.
2005-09-01
CFIC/QDrive has developed a food storage refrigerator for the Army based on thermoacoustic technology. This ``Phase II'' SBIR project is a continuation of a ``Phase I'' effort that explored using a standing-wave thermoacoustic cooler for the refrigerator. The standing-wave cooler was found to be too inefficient with too low a power density to be practical, so it was switched to an acoustic Stirling, or traveling-wave thermoacoustic (regenerator based) cooler for Phase II. The major challenges of this project were adapting the Stirling-style cooler to a food storage application, and not the fundamentals of the cooler itself (the one exception being the issue of acoustic streaming). The challenges include: Running at 60 Hz (without frequency-shifting electronics), heat exchange without circulating fluids, dynamic balance, guarantee of long life, efficiency, and compactness (power density). How these challenges were met and how they drove the design, in most cases away from what would be ideal for the cycle itself, will be discussed. Time permitting, how the additional pressure of low unit cost would affect this type of product development will also be discussed. [Research supported by the U. S. Army through a Small Business Innovation Research (SBIR) grant.
Real-Time Monitoring of Shear Wave Traveling in Liver Tissue In Vivo
Machida, Hideyuki; Yagi, Shin-ichi; Kondo, Yuji; Murata, Yutaka; Akimoto, Shin
2004-05-01
Real-time imaging of tissue dynamic response caused by internal or external stress forces acting across a living tissue is promising for improving diagnostic quality and accuracy of clinical palpation as an “ultrasonic visualized palpation”. Thus we have investigated a real-time imaging system of local tissue displacement along an ultrasonic beam scanned across the living tissue, which realized straightforward but tissue-oriented physiological and dynamic color imaging on a conventional B-mode screen. System performance is fairly supported by a flexible design of a digital signal processor for real-time local cross correlation between successive two-dimensional complex speckle echo frames. Propagation of shear waves raised by external stress in a tissue phantom was clearly observed, so that real-time observation of shear wave traveling across a physiological liver tissue locally stressed by heartbeats was studied. As a result, we could confirm the characteristic shear wave propagation pattern by internal stress synchronous with heartbeat.
Experimental Study of Linear Compressor Driven Traveling-wave Thermo Acoustic Refrigerator
Wu, Z.; Luo, E.; Dai, W.; Yu, G.
2006-04-01
The investigation on the performance of a traveling-wave thermoacoustic refrigerator driven by a self-made linear compressor is presented in this paper. The linear compressor is of moving-coil type, which has a moving coil, a piston with about 100 square centimeters cross section area, and a flexure bearing unit for piston support. The operating frequency can be adjusted to achieve a resonant status in order that the compressor can work with high electroacoustic efficiency. The thermoacoustic refrigerator operates on traveling-wave mode with acoustic power recovery. In the experiments, influence of different working frequencies on electroacoustic efficiency, lowest temperature, cooling power and COP is investigated. So far in the experiment with helium as working fluid, a lowest temperature of -29 °C is obtained, when the mean and oscillating pressures are 1.0MPa and 0.042MPa respectively and the temperature of room-temperature heat exchanger is kept around 15°C. And a maximum cooling power of about 28.5W@0°C is achieved under 1.5MPa mean pressure and 0.049MPa oscillating pressure. Besides, the performance of the linear compressor itself is also investigated, which is important for a reasonable evaluation of the refrigerator performance.
Pulse wave travel distance as a novel marker of ventricular-arterial coupling.
Obata, Yurie; Ruzankin, Pavel; Gottschalk, Allan; Nyhan, Daniel; Berkowitz, Dan E; Steppan, Jochen; Barodka, Viachaslau
2017-10-03
Each stroke volume ejected by the heart is distributed along the arterial system as a pressure waveform. How far the front of the pressure waveform travels within the arterial system depends both on the pulse wave velocity (PWV) and the ejection time (ET). We tested the hypothesis that ET and PWV are coupled together, in order to produce a pulse wave travel distance (PWTD = PWV × ET) which would match the distance from the heart to the most distant site in the arterial system. The study was conducted in 11 healthy volunteers. We recorded lead II of the ECG along with pulse plethysmography at ear, finger and toe. The ET at the ear and pulse arrival time to each peripheral site were extracted. We then calculated PWV followed by PWTD for each location. Taken into account the individual subject variability PWTDToe in the supine position was 153 cm (95% CI 146-160 cm). It was not different from arterial pathway distance from the heart to the toe (D Toe 153 cm). The PWTDFinger and PWTDEar were longer than the distance from the heart to the finger and ear irrespective of body position. ETEar and PWVToe appear to be coupled in healthy subjects to produce a PWTD that is roughly equivalent to the arterial pathway distance to the toe. We propose that PWTD should be evaluated further to test its potential as a noninvasive parameter of ventricular-arterial coupling in subjects with cardiovascular diseases.
Johnson, Kennita A.; Vormohr, Hannah R.; Doinikov, Alexander A.; Bouakaz, Ayache; Shields, C. Wyatt; López, Gabriel P.; Dayton, Paul A.
2016-05-01
Acoustophoresis uses acoustic radiation force to remotely manipulate particles suspended in a host fluid for many scientific, technological, and medical applications, such as acoustic levitation, acoustic coagulation, contrast ultrasound imaging, ultrasound-assisted drug delivery, etc. To estimate the magnitude of acoustic radiation forces, equations derived for an inviscid host fluid are commonly used. However, there are theoretical predictions that, in the case of a traveling wave, viscous effects can dramatically change the magnitude of acoustic radiation forces, which make the equations obtained for an inviscid host fluid invalid for proper estimation of acoustic radiation forces. To date, experimental verification of these predictions has not been published. Experimental measurements of viscous effects on acoustic radiation forces in a traveling wave were conducted using a confocal optical and acoustic system and values were compared with available theories. Our results show that, even in a low-viscosity fluid such as water, the magnitude of acoustic radiation forces is increased manyfold by viscous effects in comparison with what follows from the equations derived for an inviscid fluid.
Study of rectangular beam folded waveguide traveling-wave tube for terahertz radiation
Lu, Fengying; Zhang, Changqing; Grieser, Manfred; Wang, Yong; Lü, Suye; Zhao, Guohui
2017-10-01
To gain higher power with a lower cathode current density and a simpler structure, a novel rectangular beam folded waveguide traveling-wave tube (RB-FW-TWT) operating at 220 GHz is proposed and analyzed in this paper and compared with the normal circular beam (CB) FW TWT. The dispersion characteristic was investigated based on an equivalent circuit model. The interaction impedance and the S-parameter of a RB-FW traveling-wave tube were analyzed by numerical simulations. A 3-D particle-in-cell code CST particle studio was introduced to analyze the performance of RB-FW TWT. The influence of the initial electron energy, frequency, input power, guiding magnetic field, and aspect ratio of the RB tunnel on the circuit performance was observed, and physical explanations were given. It reveals that the output power of RB-FW can reach 51.1 dBm, 8.4% dBm higher than a CB-FW, with a 3 dB bandwidth of 35 GHz when the beam voltage and current are set to 14.25 kV and 140 mA, respectively. An aspect ratio of 0.4 is recommended to optimize the high-frequency properties and circuit performance.
Cloud-based design of high average power traveling wave linacs
Kutsaev, S. V.; Eidelman, Y.; Bruhwiler, D. L.; Moeller, P.; Nagler, R.; Barbe Welzel, J.
2017-12-01
The design of industrial high average power traveling wave linacs must accurately consider some specific effects. For example, acceleration of high current beam reduces power flow in the accelerating waveguide. Space charge may influence the stability of longitudinal or transverse beam dynamics. Accurate treatment of beam loading is central to the design of high-power TW accelerators, and it is especially difficult to model in the meter-scale region where the electrons are nonrelativistic. Currently, there are two types of available codes: tracking codes (e.g. PARMELA or ASTRA) that cannot solve self-consistent problems, and particle-in-cell codes (e.g. Magic 3D or CST Particle Studio) that can model the physics correctly but are very time-consuming and resource-demanding. Hellweg is a special tool for quick and accurate electron dynamics simulation in traveling wave accelerating structures. The underlying theory of this software is based on the differential equations of motion. The effects considered in this code include beam loading, space charge forces, and external magnetic fields. We present the current capabilities of the code, provide benchmarking results, and discuss future plans. We also describe the browser-based GUI for executing Hellweg in the cloud.
Directory of Open Access Journals (Sweden)
Heng Wang
2016-01-01
Full Text Available By using the method of dynamical system, the exact travelling wave solutions of the higher-order nonlinear Schrödinger equation with derivative non-Kerr nonlinear terms are studied. Based on this method, all phase portraits of the system in the parametric space are given with the aid of the Maple software. All possible bounded travelling wave solutions, such as solitary wave solutions, kink and anti-kink wave solutions, and periodic travelling wave solutions, are obtained, respectively. The results presented in this paper improve the related previous conclusions.
DEFF Research Database (Denmark)
This book is dedicated to various aspects of electromagnetic wave theory and its applications in science and technology. The covered topics include the fundamental physics of electromagnetic waves, theory of electromagnetic wave propagation and scattering, methods of computational analysis...
National Aeronautics and Space Administration — Space telecommunications require amplifiers that are efficient, high-power, wideband, small, lightweight, and highly reliable. Currently, helix traveling wave tube...
Kallosh, Renata
1994-01-01
We study the gravitational waves in the 10-dimensional target space of the superstring theory. Some of these waves have unbroken supersymmetries. They consist of Brinkmann metric and of a 2-form field. Sigma-model duality is applied to such waves. The corresponding solutions we call dual partners of gravitational waves, or dual waves. Some of these dual waves upon Kaluza-Klein dimensional reduction to 4 dimensions become equivalent to the conformo-stationary solutions of axion-dilaton gravity...
Bolborici, V; Dawson, F P; Pugh, M C
2014-03-01
Piezoelectric traveling wave rotary ultrasonic motors are motors that generate torque by using the friction force between a piezoelectric composite ring (or disk-shaped stator) and a metallic ring (or disk-shaped rotor) when a traveling wave is excited in the stator. The motor speed is proportional to the amplitude of the traveling wave and, in order to obtain large amplitudes, the stator is excited at frequencies close to its resonance frequency. This paper presents a non-empirical partial differential equations model for the stator, which is discretized using the finite volume method. The fundamental frequency of the discretized model is computed and compared to the experimentally-measured operating frequency of the stator of Shinsei USR60 piezoelectric motor. Copyright © 2013 Elsevier B.V. All rights reserved.
Directory of Open Access Journals (Sweden)
Farhad Namdari
2016-06-01
Full Text Available Accurate fault classification and localization are the bases of protection for transmission systems. This paper presents a new method for classifying and showing location of faults by travelling waves and modal analysis. In the proposed method, characteristics of different faults are investigated using Clarke transformation and initial current traveling wave; then, appropriate indices are introduced to identify different types of faults. Continuous wavelet transform (CWT is employed to extract information of current and voltage travelling waves. Fault location and classification algorithm is being designed according to wavelet transform coefficients relating to current and voltage modal components. The performance of the proposed method is tested for different fault conditions (different fault distance, different fault resistances, and different fault inception angles by using PSCAD and MATLAB with satisfactory results
Collective transport for active matter run-and-tumble disk systems on a traveling-wave substrate
Sándor, Cs.; Libál, A.; Reichhardt, C.; Reichhardt, C. J. Olson
2017-01-01
We examine numerically the transport of an assembly of active run-and-tumble disks interacting with a traveling-wave substrate. We show that as a function of substrate strength, wave speed, disk activity, and disk density, a variety of dynamical phases arise that are correlated with the structure and net flux of disks. We find that there is a sharp transition into a state in which the disks are only partially coupled to the substrate and form a phase-separated cluster state. This transition is associated with a drop in the net disk flux, and it can occur as a function of the substrate speed, maximum substrate force, disk run time, and disk density. Since variation of the disk activity parameters produces different disk drift rates for a fixed traveling-wave speed on the substrate, the system we consider could be used as an efficient method for active matter species separation. Within the cluster phase, we find that in some regimes the motion of the cluster center of mass is in the opposite direction to that of the traveling wave, while when the maximum substrate force is increased, the cluster drifts in the direction of the traveling wave. This suggests that swarming or clustering motion can serve as a method by which an active system can collectively move against an external drift.
Ku-Band Traveling Wave Slot Array Using Simple Scanning Control
Host, Nicholas K.; Chen, Chi-Chih; Volakis, John L.; Miranda, Felix A.
2015-01-01
This paper introduces a feeding concept aimed at simplifying the backend (phase shifters) of traditional phased arrays. As an alternative to traditional phased arrays, we employ a traveling wave array (TWA) using a single feedline whose propagation constant is controlled via a single, small mechanical movement without a need for phase shifters to enable scanning. Specifically, a dielectric plunger is positioned within a parallel plate waveguide (PPW) transmission line (TL) that feeds the TWA. By adjusting the position of the dielectric plunger within the PPW feeding the TWA, beam steering is achieved. A 20 element array is designed at 13GHz shown to give stable realized gain across the angular range of -25 deg. less than or equal to theta less than or equal to 25 deg. A proof of concept array is fabricated and measured to demonstrate and validate the concept's operation.
Webb, Andrew G; Collins, Christopher M; Versluis, Maarten J; Kan, Hermien E; Smith, Nadine B
2010-02-01
Using a small resonant loop to produce a longitudinal traveling wave on a human 7-T system allows MR to be performed over the entire volume of the human leg. We have used this capability to perform localized proton MR spectroscopy of the lipid composition of muscle in volunteers with a coil placed approximately 30 cm away from the region of interest. Spectra with a reasonable signal-to-noise ratio can be acquired in a clinically relevant data acquisition time of less than 5 min using the loop in transmit/receive mode, maintaining the full flexibility to acquire spectra from any part of the calf and/or thigh. If a local receive coil is used in combination with the remote transmit coil, then the signal-to-noise improves significantly, as expected.
One-dimensional nonlinear theory for rectangular helix traveling-wave tube
Energy Technology Data Exchange (ETDEWEB)
Fu, Chengfang, E-mail: fchffchf@126.com; Zhao, Bo; Yang, Yudong; Ju, Yongfeng [Faculty of Electronic Information Engineering, Huaiyin Institute of Technology, Huai' an 223003 (China); Wei, Yanyu [School of Physical Electronics, University of Electronic and Technology of China, Chengdu 610054 (China)
2016-08-15
A 1-D nonlinear theory of a rectangular helix traveling-wave tube (TWT) interacting with a ribbon beam is presented in this paper. The RF field is modeled by a transmission line equivalent circuit, the ribbon beam is divided into a sequence of thin rectangular electron discs with the same cross section as the beam, and the charges are assumed to be uniformly distributed over these discs. Then a method of computing the space-charge field by solving Green's Function in the Cartesian Coordinate-system is fully described. Nonlinear partial differential equations for field amplitudes and Lorentz force equations for particles are solved numerically using the fourth-order Runge-Kutta technique. The tube's gain, output power, and efficiency of the above TWT are computed. The results show that increasing the cross section of the ribbon beam will improve a rectangular helix TWT's efficiency and reduce the saturated length.
Study of 42 and 85 GHz coupled cavity traveling-wave tubes for space use
Kennedy, J. B.; Tammaru, I.; Wolcott, P. S.
1977-01-01
Designs were formulated for four CW, millimeter wavelength traveling-wave tubes having high efficiency and long life. Three of these tubes, in the 42 to 44 GHz frequency region, develop power outputs of 100 to 300 watts with overall efficiencies of typically 45 percent. Another tube, which covers the frequency range of 84 to 86 GHz, provides a power output of 200 watts at 25 percent efficiency. The cathode current density in each design was 1A/sq cm. Each tube includes: metal-ceramic construction, periodic permanent magnet focusing, a two step velocity taper, an electron beam refocusing section, and a radiation cooled three-stage depressed collector. The electrical and mechanical design for each tube type is discussed in detail. The results of thermal and mechanical analyses are presented.
Directory of Open Access Journals (Sweden)
Eric Dumonteil
2017-09-01
Full Text Available The Monte Carlo criticality simulation of decoupled systems, as for instance in large reactor cores, has been a challenging issue for a long time. In particular, due to limited computer time resources, the number of neutrons simulated per generation is still many order of magnitudes below realistic statistics, even during the start-up phases of reactors. This limited number of neutrons triggers a strong clustering effect of the neutron population that affects Monte Carlo tallies. Below a certain threshold, not only is the variance affected but also the estimation of the eigenvectors. In this paper we will build a time-dependent diffusion equation that takes into account both spatial correlations and population control (fixed number of neutrons along generations. We will show that its solution obeys a traveling wave dynamic, and we will discuss the mechanism that explains this biasing of local tallies whenever leakage boundary conditions are applied to the system.
Traveling-wave-tube simulation: The IBC (Interactive Beam-Circuit) code
Energy Technology Data Exchange (ETDEWEB)
Morey, I.J.; Birdsall, C.K.
1989-09-26
Interactive Beam-Circuit (IBC) is a one-dimensional many particle simulation code which has been developed to run interactively on a PC or Workstation, and displaying most of the important physics of a traveling-wave-tube. The code is a substantial departure from previous efforts, since it follows all of the particles in the tube, rather than just those in one wavelength, as commonly done. This step allows for nonperiodic inputs in time, a nonuniform line and a large set of spatial diagnostics. The primary aim is to complement a microwave tube lecture course, although past experience has shown that such codes readily become research tools. Simple finite difference methods are used to model the fields of the coupled slow-wave transmission line. The coupling between the beam and the transmission line is based upon the finite difference equations of Brillouin. The space-charge effects are included, in a manner similar to that used by Hess; the original part is use of particle-in-cell techniques to model the space-charge fields. 11 refs., 11 figs.
Travelling-wave amplitudes as solutions of the phase-field crystal equation
Nizovtseva, I. G.; Galenko, P. K.
2018-01-01
The dynamics of the diffuse interface between liquid and solid states is analysed. The diffuse interface is considered as an envelope of atomic density amplitudes as predicted by the phase-field crystal model (Elder et al. 2004 Phys. Rev. E 70, 051605 (doi:10.1103/PhysRevE.70.051605); Elder et al. 2007 Phys. Rev. B 75, 064107 (doi:10.1103/PhysRevB.75.064107)). The propagation of crystalline amplitudes into metastable liquid is described by the hyperbolic equation of an extended Allen-Cahn type (Galenko & Jou 2005 Phys. Rev. E 71, 046125 (doi:10.1103/PhysRevE.71.046125)) for which the complete set of analytical travelling-wave solutions is obtained by the http://www.w3.org/1999/xlink" xlink:href="RSTA20170202IM1"/> method (Malfliet & Hereman 1996 Phys. Scr. 15, 563-568 (doi:10.1088/0031-8949/54/6/003); Wazwaz 2004 Appl. Math. Comput. 154, 713-723 (doi:10.1016/S0096-3003(03)00745-8)). The general http://www.w3.org/1999/xlink" xlink:href="RSTA20170202IM2"/> solution of travelling waves is based on the function of hyperbolic tangent. Together with its set of particular solutions, the general http://www.w3.org/1999/xlink" xlink:href="RSTA20170202IM3"/> solution is analysed within an example of specific task about the crystal front invading metastable liquid (Galenko et al. 2015 Phys. D 308, 1-10 (doi:10.1016/j.physd.2015.06.002)). The influence of the driving force on the phase-field profile, amplitude velocity and correlation length is investigated for various relaxation times of the gradient flow. This article is part of the theme issue `From atomistic interfaces to dendritic patterns'.
Spreading Speed, Traveling Waves, and Minimal Domain Size in Impulsive Reaction–Diffusion Models
Lewis, Mark A.
2012-08-15
How growth, mortality, and dispersal in a species affect the species\\' spread and persistence constitutes a central problem in spatial ecology. We propose impulsive reaction-diffusion equation models for species with distinct reproductive and dispersal stages. These models can describe a seasonal birth pulse plus nonlinear mortality and dispersal throughout the year. Alternatively, they can describe seasonal harvesting, plus nonlinear birth and mortality as well as dispersal throughout the year. The population dynamics in the seasonal pulse is described by a discrete map that gives the density of the population at the end of a pulse as a possibly nonmonotone function of the density of the population at the beginning of the pulse. The dynamics in the dispersal stage is governed by a nonlinear reaction-diffusion equation in a bounded or unbounded domain. We develop a spatially explicit theoretical framework that links species vital rates (mortality or fecundity) and dispersal characteristics with species\\' spreading speeds, traveling wave speeds, as well as minimal domain size for species persistence. We provide an explicit formula for the spreading speed in terms of model parameters, and show that the spreading speed can be characterized as the slowest speed of a class of traveling wave solutions. We also give an explicit formula for the minimal domain size using model parameters. Our results show how the diffusion coefficient, and the combination of discrete- and continuous-time growth and mortality determine the spread and persistence dynamics of the population in a wide variety of ecological scenarios. Numerical simulations are presented to demonstrate the theoretical results. © 2012 Society for Mathematical Biology.
Physics design of a 10 MeV, 6 kW travelling wave electron linac for ...
Indian Academy of Sciences (India)
2016-10-11
Oct 11, 2016 ... Three- dimensional transient simulations of the accelerating structure along with the input and output couplers have been performed using the software CST-MWS to explicitly demonstrate this feature. Keywords. Travelling wave; electromagnetic design; integrated buncher; constant impedance; longitudinal.
Directory of Open Access Journals (Sweden)
Shahnam Javadi
2013-07-01
Full Text Available In this paper, the $(G'/G$-expansion method is applied to solve a biological reaction-convection-diffusion model arising in mathematical biology. Exact traveling wave solutions are obtained by this method. This scheme can be applied to a wide class of nonlinear partial differential equations.
A new traveling wave phenomenon of Dictyostelium in the presence of cAMP
Ševčíková, Hana; Čejková, Jitka; Krausová, Lenka; Přibyl, Michal; Štěpánek, František; Marek, Miloš
2010-06-01
The emergence of wave patterns in chemical and biological systems is of interest for the understanding of development, differentiation, signaling, and other phenomena. In this work we report a new type of wave pattern - called the “global wave” - which was observed in populations of Dictyostelium discoideum cells exposed to an excess of cyclic adenosine- 3‧, 5‧- monophosphate (cAMP) added to the supporting agar. It has been found that the addition of different amounts of cAMP to the agar leads to important deviations from the standard course of aggregation: (i) the formation and propagation of a global wave that has not been observed before; (ii) the delayed onset or absence of cAMP waves patterning; (iii) an atypical mechanism of cells clustering; and (iv) a faster or incomplete developmental cycle. We suggest that the global wave is a chemotactic response of the Dictyostelium cells to a wave of the cAMP concentration.
Swanson, DG
1989-01-01
Plasma Waves discusses the basic development and equations for the many aspects of plasma waves. The book is organized into two major parts, examining both linear and nonlinear plasma waves in the eight chapters it encompasses. After briefly discussing the properties and applications of plasma wave, the book goes on examining the wave types in a cold, magnetized plasma and the general forms of the dispersion relation that characterize the waves and label the various types of solutions. Chapters 3 and 4 analyze the acoustic phenomena through the fluid model of plasma and the kinetic effects. Th
Ring-plane traveling-wave tube slow-wave circuit design simulations at V-Band frequencies
Kory, Carol L.; Wilson, Jeffrey D.
1995-01-01
The V-Band frequency range of 59-64 GHz is a region of the millimeter-wave spectrum that has been designated for intersatellite communications. As a first effort to develop a high-efficiency V-band TWT, variations on a ring-plane slow-wave circuit were computationally investigated to develop an alternative to the more conventional ferruled coupled-cavity circuit. The ring-plane circuit was chosen because of its high interaction impedance, large beam aperture, and excellent thermal dissipation properties. Despite the high-power capabilities of the ring-plane TWT, disadvantages of low bandwidth and high voltage requirements have until now prevented its acceptance outside the laboratory. In this paper, we use the three-dimensional electromagnetic simulation code MAFIA to investigate methods of increasing the bandwidth and lowering the operating voltage. Dispersion, impedance, and attenuation calculations for various geometric variations and loading distributions were performed. Based on the results of the variations, a circuit termed the finned-ladder TWT slowwave circuit was designed and is compared here to the scaled ring-plane prototype and the conventional ferruled coupled-cavity TWT circuit over the V-band frequency range.
DEFF Research Database (Denmark)
Kramer, Morten; Brorsen, Michael; Frigaard, Peter
Denne rapport beskriver numeriske beregninger af forskellige flydergeometrier for bølgeenergianlæget Wave Star.......Denne rapport beskriver numeriske beregninger af forskellige flydergeometrier for bølgeenergianlæget Wave Star....
Heat Waves Dangers we face during periods of very high temperatures include: Heat cramps: These are muscular pains and ... having trouble with the heat. If a heat wave is predicted or happening… - Slow down. Avoid strenuous ...
A Stable Traveling-Wave Optical Parametric Oscillator for Entanglement Protection and Manipulation
Bloomer, Russell
This dissertation presents both the theoretical and experimental progress in building sources for both quantum optics and one-way quantum computing. An optical parametric oscillator (OPO) is a source of quantum fields. The quantum fields of an OPO can be squeezed, which is suited for interferometry, and can be entangled, which is necessary for one-way quantum computing. A traveling-wave OPO was built for research in quantum optics and quantum information. An OPO is a resonant cavity with a nonlinear crystal inside. The nonlinear crystal in the OPO produced twin beams (at 1064 nm) by down converting a pump source (at 532 nm) Like a laser, the OPO can be below or above threshold. The traveling-wave design allowed for the OPO to be pumped in counterpropagating directions to produce twin beam pairs counterpropagating in the cavity. Due to the resonance conditions of the cavity, the forward and backward twin beam pairs were identical. When the OPO was above threshold (240 mW) in the forward direction, the intensity noise of the forward twin beams was reduced by 5.9 dB. The intensity noise for the backward twin beams was reduced by 5.1 dB, when the OPO was above threshold (280 mW). This OPO is a core component of several sophisticated quantum optics experiments. One such experiment is the creation of a scalable number of 4-mode cluster entangled states in the optical frequency comb of the OPO. A cluster state is an entangled state that is necessary to perform one-way quantum computing. This work presents a detailed theory, an experimental proposal, and exhaustive preliminary experiments towards creating several four-mode cluster states in a single OPO. The second experiment considered in this dissertation is the protection of entanglement from decoherence by the quantum engineering of the reservoir fluctuations which, once traced over, are responsible for decoherence. It was shown that entangling the reservoirs that interact with initial two entangled physical systems
DEFF Research Database (Denmark)
Kofoed, Jens Peter; Frigaard, Peter; Sørensen, H. C.
1998-01-01
This paper concerns with the development of the wave energy converter (WEC) Wave Dragon. This WEC is based on the overtopping principle. An overview of the performed research done concerning the Wave Dragon over the past years is given, and the results of one of the more comprehensive studies......, concerning a hydraulic evaluation and optimisation of the geometry of the Wave Dragon, is presented. Furthermore, the plans for the future development projects are sketched....
Energy Technology Data Exchange (ETDEWEB)
Miller, Jonah Maxwell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2017-10-18
This report has slides on Gravitational Waves; Pound and Rebka: A Shocking Fact; Light is a Ruler; Gravity is the Curvature of Spacetime; Gravitational Waves Made Simple; How a Gravitational Wave Affects Stuff Here; LIGO; This Detection: Neutron Stars; What the Gravitational Wave Looks Like; The Sound of Merging Neutron Stars; Neutron Star Mergers: More than GWs; The Radioactive Cloud; The Kilonova; and finally Summary, Multimessenger Astronomy.
Blok, H.; van den Berg, P.M.
2011-01-01
This book is dedicated to various aspects of electromagnetic wave theory and its applications in science and technology. The covered topics include the fundamental physics of electromagnetic waves, theory of electromagnetic wave propagation and scattering, methods of computational analysis, material characterization, electromagnetic properties of plasma, analysis and applications of periodic structures and waveguide components, etc.
DEFF Research Database (Denmark)
Tedd, James; Kofoed, Jens Peter; Knapp, W.
2006-01-01
Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...
Towne, Dudley H
1988-01-01
This excellent undergraduate-level text emphasizes optics and acoustics, covering inductive derivation of the equation for transverse waves on a string, acoustic plane waves, boundary-value problems, polarization, three-dimensional waves and more. With numerous problems (solutions for about half). ""The material is superbly chosen and brilliantly written"" - Physics Today. Problems. Appendices.
A scheme for a terahertz traveling-wave amplifier working with the TE11 mode in a circular waveguide
Energy Technology Data Exchange (ETDEWEB)
Chang, L.H., E-mail: lhchang@nsrrc.org.tw; Wang, Ch.; Luo, G.H.; Yu, T.C.; Liu, Z.K.; Yeh, M.S.; Lin, M.C.; Lin, Y.H.; Chung, F.T.; Chang, M.H.; Chen, L.J.; Lo, C.H.; Tsai, M.H.
2015-01-21
To enlarge the interaction structure to a feasible dimension and to decrease the required magnetic field to an available strength, the gyrotron devices at THz frequencies must be designed with a high-order-mode interaction, which is weaker in a beam–wave interaction and more susceptible to mode competition. Using the same interaction structure (a circular waveguide) as in the gyrotron traveling-wave amplifier (gyro-TWT), but replacing the axial magnetic field of the gyro-TWT with a tapered helical magnetic field, we found that the gyrating electrons are able to perform strong interaction with the TE11 mode in the THz region. Through an example case, we explored the behavior of the particles and wave fields as in a beam–wave interaction under a modified scheme of the gyro-TWT with a numerical simulation code. The equations required for the simulation are presented. The simulation result of the example case indicates that, through the TE11 beam–wave interaction under the presented scheme, more than one quarter of the beam energy can be converted to the wave at 612.7 GHz and to heat, dissipated on the waveguide wall, of radius 2.5 cm.
Nunez, Paul L; Srinivasan, Ramesh
2006-11-01
We propose a theoretical framework for EEG and evoked potential studies based on the single postulate that these data are composed of a combination of waves (as this term is used in the physical sciences) and thalamocortical network activity. Using known properties of traveling and standing waves, independent of any neocortical dynamic theory, our simple postulate leads to experimental predictions, several of which have now been verified. A mathematical-physiological theory of "brain waves" based on known (but highly idealized) properties of cortical synaptic action and corticocortical fibers is used to support the framework. Brain waves are predicted with links between temporal frequencies and the spatial distributions of synaptic activity. Such dispersion relations, which essentially define more general phenomena as waves, are shown to restrict the spatial-temporal dynamics of synaptic action with many experimental EEG consequences. The proposed framework accounts for several salient features of spontaneous EEG and evoked potentials. We conjecture that wave-like behavior of synaptic action may facilitate interactions between remote cell assemblies, providing an important mechanism for the functional integration underlying conscious experience.
Non-invasive biophysical measurement of travelling waves in the insect inner ear.
Sarria-S, Fabio A; Chivers, Benedict D; Soulsbury, Carl D; Montealegre-Z, Fernando
2017-05-01
Frequency analysis in the mammalian cochlea depends on the propagation of frequency information in the form of a travelling wave (TW) across tonotopically arranged auditory sensilla. TWs have been directly observed in the basilar papilla of birds and the ears of bush-crickets (Insecta: Orthoptera) and have also been indirectly inferred in the hearing organs of some reptiles and frogs. Existing experimental approaches to measure TW function in tetrapods and bush-crickets are inherently invasive, compromising the fine-scale mechanics of each system. Located in the forelegs, the bush-cricket ear exhibits outer, middle and inner components; the inner ear containing tonotopically arranged auditory sensilla within a fluid-filled cavity, and externally protected by the leg cuticle. Here, we report bush-crickets with transparent ear cuticles as potential model species for direct, non-invasive measuring of TWs and tonotopy. Using laser Doppler vibrometry and spectroscopy, we show that increased transmittance of light through the ear cuticle allows for effective non-invasive measurements of TWs and frequency mapping. More transparent cuticles allow several properties of TWs to be precisely recovered and measured in vivo from intact specimens. Our approach provides an innovative, non-invasive alternative to measure the natural motion of the sensilla-bearing surface embedded in the intact inner ear fluid.
Kim, Hugh I.; Kim, Hyungjun; Pang, Eric S.; Ryu, Ernest K.; Beegle, Luther W.; Loo, Joseph A.; Goddard, William A.; Kanik, Isik
2009-01-01
A number of phosphatidylcholine (PC) cations spanning a mass range of 400 to 1000 Da are investigated using electrospray ionization mass spectrometry coupled with traveling wave ion mobility spectrometry (TWIMS). A high correlation between mass and mobility is demonstrated with saturated phosphatidylcholine cations in N2. A significant deviation from this mass-mobility correlation line is observed for the unsaturated PC cation. We found that the double bond in the acyl chain causes a 5% reduction in drift time. The drift time is reduced at a rate of ~1% for each additional double bond. Theoretical collision cross sections of PC cations exhibit good agreement with experimentally evaluated values. Collision cross sections are determined using the recently derived relationship between mobility and drift time in TWIMS stacked ring ion guide (SRIG) and compared to estimate collision cross-sections using empiric calibration method. Computational analysis was performed using the modified trajectory (TJ) method with nonspherical N2 molecules as the drift gas. The difference between estimated collision cross-sections and theoretical collision cross-sections of PC cations is related to the sensitivity of the PC cation collision cross-sections to the details of the ion-neutral interactions. The origin of the observed correlation and deviation between mass and mobility of PC cations is discussed in terms of the structural rigidity of these molecules using molecular dynamic simulations. PMID:19764704
Traveling waves in a coupled reaction-diffusion and difference model of hematopoiesis
Adimy, M.; Chekroun, A.; Kazmierczak, B.
2017-04-01
The formation and development of blood cells is a very complex process, called hematopoiesis. This process involves a small population of cells called hematopoietic stem cells (HSCs). The HSCs are undifferentiated cells, located in the bone marrow before they become mature blood cells and enter the blood stream. They have a unique ability to produce either similar cells (self-renewal), or cells engaged in one of different lineages of blood cells: red blood cells, white cells and platelets (differentiation). The HSCs can be either in a proliferating or in a quiescent phase. In this paper, we distinguish between dividing cells that enter directly to the quiescent phase and dividing cells that return to the proliferating phase to divide again. We propose a mathematical model describing the dynamics of HSC population, taking into account their spatial distribution. The resulting model is a coupled reaction-diffusion equation and difference equation with delay. We study the existence of monotone traveling wave fronts and the asymptotic speed of spread.
A traveling wave ultrasonic motor with a metal/polymer-matrix material compound stator
Li, Jinbang; Liu, Shuo; Zhou, Ningning; Yu, Aibing; Cui, Yuguo; Chen, Pengfei
2018-01-01
This study proposes a traveling wave ultrasonic motor with a metal/polymer-matrix material compound stator. The stator is composed of a metal ring and polymer-matrix teeth. The resonance frequency of the stator with different structural dimensions was analyzed by the finite element method. From the results, the structure parameters of the metal ring were obtained. The effects of the density and elastic modulus of the tooth material on the resonance frequency were also investigated. A viscoelastic contact model was built to explore the contact state between the compound stator and rotor. Considering the density, elastic modulus and tribological properties, the tooth material was prepared by a molding process. The load–torque and efficiency–torque characteristics of the motor with different tooth thicknesses were measured under different preloads using a preload controlled ultrasonic motor test device. The maximum no-load speed of the motor was about 85 r min‑1 with a tooth thickness of 3 mm and a preload of 100 N, the maximum stall torque of the motor was about 0.5 N · m with a tooth thickness of 4 mm and a preload of 125 N, and a maximum efficiency of about 5.5% occurred with a tooth thickness of 4 mm, a preload of 100 N and a torque of 0.3 N · m. The main merits of the proposed ultrasonic motor are low cost, light weight, high processing efficiency and long life.
The 938 MHz resonant damping loops for the 200 MHz SPS travelling wave cavities
Caspers, F
2012-01-01
Measurements of the beam stability in the SPS in 1982 - 1983 have shown a transversal instability for high intensity beams [1]. The fact that this related technical note is published nearly 30 years later, is related to the revival of interest in the frame of SPS impedance evaluation for LS1. Until now there was just a barely known paper folder available which could be consulted on request. The instability mentioned above was identified from beam measurements as raised by a deflecting mode at approximately 940 MHz in the 200 MHz travelling wave cavities of the SPS. Estimates showed that an attenuation of this particular mode by 20 dB would be desirable. In order to achieve this attenuation some vacuum ports on top of the cavities were available. For the damping devices three requirements had to be met: - sufficient damping at about 940 MHz - no serious change of cavity input VSWR at 200 MHz - no water cooling requirement for this higher order mode coupler.
Diversity in Gold Finger Structure Elucidated by Traveling-Wave Ion Mobility Mass Spectrometry.
Du, Zhifeng; de Paiva, Raphael E F; Nelson, Kristina; Farrell, Nicholas P
2017-04-10
Traveling wave ion mobility (TWIM) mass spectrometry (MS) is a powerful method for the structural and conformational analysis of proteins and peptides, enabling the differentiation of isomeric peptides (or proteins) that have the same sequence but are modified at different residues. In this study, the TWIM-MS technique was used to separate isomeric AuI metallopeptide ions that were formed by ZnII displacement from the parent zinc fingers (ZFs). The synthetic gold finger peptides were derived from the C-terminus of the HIV nucleocapsid p7 protein (NCp7-F2) and finger 3 of the Sp1 transcription factor (Sp1-F3). TWIM-MS enabled the acquisition of distinct product ion spectra for each isomer, clearly indicating the binding sites for the major conformers in the presence of multiple coordination possibilities. Collision cross-section measurements showed that the aurated peptide has a slightly more compact structure than the parent zinc compound NCp7-F2, which showed only one conformation. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Dividing to unveil protein microheterogeneities: A Traveling Wave Ion Mobility study
Halgand, F.; Habchi, Johnny; Cravello, Laetitia; Martinho, Marlène; Guigliarelli, Bruno; Longhi, Sonia
2011-01-01
Over-expression of a protein in a foreign host is often the only route toward an exhaustive characterization especially when purification from the natural source(s) is hardly achievable. The key issue in these studies relies on quality control of the purified recombinant protein to precisely determining its identity as well as any undesirable micro-heterogeneities. While standard proteomics approaches preclude unbiased search for modifications, the optional technique of top down MSMS requires the use of highly accurate and highly resolved experiments to reveal subtle sequence modifications. In the present study, the top down MSMS approach combined with Traveling Wave Ion Mobility (TWIM) separation was evaluated for its ability to achieve high sequence coverage and to reveal subtle micro-heterogeneities that were hitherto only accessible with FTICR-MS instruments. The power of this approach is herein illustrated in an in-depth analysis of both wt and K496C variant of the recombinant X domain (XD, aa 459-507) of the measles virus phosphoprotein expressed in E. coli. Using top down MSMS combined to TWIM, we show that XD samples occasionally exhibit a micro-heterogeneity that could not be anticipated from the nucleotide sequence of the encoding constructs and that likely reflects a genetic drift, neutral or not, occurring during expression. In addition, an MTSL nitroxide probe that was grafted on the K496C XD variant was shown to undergo oxidation and/or protonation in the ESI source leading to artifactual mass increases. PMID:21800924
Wiejak, W.; Wymysłowski, A.
2016-01-01
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes, e.g. radar systems. TWT's is an alternative solution in comparison to semiconductor devices in case of high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. The main goal of the research was to perform analytical, experimental and numerical analysis of a temperature distribution of a low band TWT in case of a typical working condition. Because the theoretical analysis seems to be very complex thus it was decided to compare the experimental results with the numerical simulations as well as with the simplified analytical formulas. As a first step of the presented research, the analytical analysis and numerical modelling of the helix TWT was carried out. The objective of the thermal analysis was to assess the temperature distribution in different parts of the helix TWT assembly during the extreme standard and working conditions. As a second stage of the research the numerical results were validated by the experimental measurements, which were carried out using a specially designed TWT test samples and corresponding experimental measurement tools.
Thermal effect on the thermomechanical behavior of contacts in a Traveling Wave Tube
Directory of Open Access Journals (Sweden)
Chbiki Mounir
2016-01-01
Full Text Available A new elasto-plastic study of the contact between the helix and the rods of the delay line of Traveling Waves Tubes (TWT was realized. Our study is focused on the analysis of the hot lines shrinking phenomenon. In the studied case, unlike brazed configuration, the contact areas are not perfect, resulting in a diminution of the heat transfer process. In order to maximize the contact area and to homogenize the contact pressure, a soft thermal conductive material is coated on the helix: copper was chosen for this study. In the present work, an analytical model is used to identify the properties of the copper coating at a given temperature. We focused on the mechanical properties in order to improve the assembly process with a better numerical study. Experimental method have been made to validate the proposed model. The first comparison results seem to indicate that the model represents the reality with a good agreement. It is very clearly shown that the temperature decreases the mechanical properties. (Young’s modulus, yield strength, tensile strength…. And the thickness of the coating increases the contact area. This last point is less important at room temperature (6% of increase than at 140°C (22%.
Preliminary concept design of sodium-cooled radial fuel shuffling traveling wave reactor
Energy Technology Data Exchange (ETDEWEB)
Tian, W.; Zheng, M.; Chu, X.; Zhang, D.; Su, G.; Qiu, S. [Xi' an Jiaotong University, School of Nuclear Science and Technology, Xi' an (China)
2014-07-01
The concept of traveling wave reactor (TWR) has been investigated for several decades and has been applied to kinds of reactors. Radial fuel shuffling TWR is a new TWR concept, which has been put forward for only a few years by Terra Power LCC. In the present paper, a sodium-cooled radial fuel shuffling TWR is preliminarily designed. To perform neutronic and burn-up investigation, a MCNP-ORIGEN coupled code system, called MCORE, is used. The comparison between calculation results of MCORE and benchmark values showed the calculation ability of MCORE. The calculation results of radial fuel shuffling TWR show that the asymptotic κ{sub eff} parabolically varies with the shuffling period, while the burn-up increase linearly with shuffling period. The power peak shifts from the core inside to the core outside. To reduce the power peak, shuffling period 450 days is recognized as the best design. The asymptotic is 1.020 and the average burn-up is about 156 MWd/kg-HM. (author)
Sound wave transmission (image)
When sounds waves reach the ear, they are translated into nerve impulses. These impulses then travel to the brain where they are interpreted by the brain as sound. The hearing mechanisms within the inner ear, can ...
Use of acoustic wave travel-time measurements to probe the near-surface layers of the Sun
Jefferies, S. M.; Osaki, Y.; Shibahashi, H.; Duvall, T. L., Jr.; Harvey, J. W.; Pomerantz, M. A.
1994-01-01
The variation of solar p-mode travel times with cyclic frequency nu is shown to provide information on both the radial variation of the acoustic potential and the depth of the effective source of the oscillations. Observed travel-time data for waves with frequency lower than the acoustic cutoff frequency for the solar atmosphere (approximately equals 5.5 mHz) are inverted to yield the local acoustic cutoff frequency nu(sub c) as a function of depth in the outer convection zone and lower atmosphere of the Sun. The data for waves with nu greater than 5.5 mHz are used to show that the source of the p-mode oscillations lies approximately 100 km beneath the base of the photosphere. This depth is deeper than that determined using a standard mixing-length calculation.
Superluminal waves in amplifying media
Energy Technology Data Exchange (ETDEWEB)
Oraevsky, Anatolii N [P.N. Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)
1998-12-31
In amplifying media steady-state waves can travel faster than the speed of light in vacuum without violating the principles of special relativity. The possibility of generating superluminal waves in induced elementary particle production processes is discussed. (methodological notes)
Kazeykina, A. V.
2010-04-01
The asymptotic behavior of the solution to the Cauchy problem for the Korteweg-de Vries-Burgers equation u t + ( f( u)) x + au xxx - bu xx = 0 as t → ∞ is analyzed. Sufficient conditions for the existence and local stability of a traveling-wave solution known in the case of f( u) = u 2 are extended to the case of an arbitrary sufficiently smooth convex function f( u).
Dong, Po; Gui, Chengcheng
2016-06-15
In coherent optical transmission, traveling-wave Mach-Zehnder modulators are commonly used to generate various advanced formats where the modulators are biased at the minimum transmission point. Here, we report that an optical isolation effect with lower backward transmission occurs under this condition. This concept is successfully demonstrated to achieve ∼7 dB isolation over a 90-nm wavelength span under binary phase-shift keying modulation using a commercial lithium niobate modulator.
Traveling Wave Amplifier Driven by a Large Diameter Annular Electron Beam in a Disk-Loaded Structure
2015-10-30
unlimited. 13. SUPPLEMENTARY NOTES OPS-15-9244 14. ABSTRACT This project studies the viability of a high-power traveling wave tube ( TWT ) using a novel...calculated using Pierce classical theory of TWT based on C and QC, and was spot-checked against simulation results from the ICEPIC, MAGIC and...CHRISTINE codes. Fair agreement was observed. The preliminary conclusion is that the disk-on-rod TWT is a viable, high-power extension to the conventional
Hanapi, Zurina Mohd; Othman, Mohamed; Zukarnain, Zuriati Ahmad
2017-01-01
Recently, Pulse Coupled Oscillator (PCO)-based travelling waves have attracted substantial attention by researchers in wireless sensor network (WSN) synchronization. Because WSNs are generally artificial occurrences that mimic natural phenomena, the PCO utilizes firefly synchronization of attracting mating partners for modelling the WSN. However, given that sensor nodes are unable to receive messages while transmitting data packets (due to deafness), the PCO model may not be efficient for sensor network modelling. To overcome this limitation, this paper proposed a new scheme called the Travelling Wave Pulse Coupled Oscillator (TWPCO). For this, the study used a self-organizing scheme for energy-efficient WSNs that adopted travelling wave biologically inspired network systems based on phase locking of the PCO model to counteract deafness. From the simulation, it was found that the proposed TWPCO scheme attained a steady state after a number of cycles. It also showed superior performance compared to other mechanisms, with a reduction in the total energy consumption of 25%. The results showed that the performance improved by 13% in terms of data gathering. Based on the results, the proposed scheme avoids the deafness that occurs in the transmit state in WSNs and increases the data collection throughout the transmission states in WSNs. PMID:28056020
Energy Technology Data Exchange (ETDEWEB)
Ambrose, David M.; Wilkening, Jon
2008-12-11
We classify all bifurcations from traveling waves to non-trivial time-periodic solutions of the Benjamin-Ono equation that are predicted by linearization. We use a spectrally accurate numerical continuation method to study several paths of non-trivial solutions beyond the realm of linear theory. These paths are found to either re-connect with a different traveling wave or to blow up. In the latter case, as the bifurcation parameter approaches a critical value, the amplitude of the initial condition grows without bound and the period approaches zero. We propose a conjecture that gives the mapping from one bifurcation to its counterpart on the other side of the path of non-trivial solutions. By experimentation with data fitting, we identify the form of the exact solutions on the path connecting two traveling waves, which represents the Fourier coefficients of the solution as power sums of a finite number of particle positions whose elementary symmetric functions execute simple orbits in the complex plane (circles or epicycles). We then solve a system of algebraic equations to express the unknown constants in the new representation in terms of the mean, a spatial phase, a temporal phase, four integers (enumerating the bifurcation at each end of the path) and one additional bifurcation parameter. We also find examples of interior bifurcations from these paths of already non-trivial solutions, but we do not attempt to analyze their algebraic structure.
Renteria Marquez, I A; Bolborici, V
2017-05-01
This manuscript presents a method to model in detail the piezoelectric traveling wave rotary ultrasonic motor (PTRUSM) stator response under the action of DC and AC voltages. The stator is modeled with a discrete two dimensional system of equations using the finite volume method (FVM). In order to obtain accurate results, a model of the stator bridge is included into the stator model. The model of the stator under the action of DC voltage is presented first, and the results of the model are compared versus a similar model using the commercial finite element software COMSOL Multiphysics. One can observe that there is a difference of less than 5% between the displacements of the stator using the proposed model and the one with COMSOL Multiphysics. After that, the model of the stator under the action of AC voltages is presented. The time domain analysis shows the generation of the traveling wave in the stator surface. One can use this model to accurately calculate the stator surface velocities, elliptical motion of the stator surface and the amplitude and shape of the stator traveling wave. A system of equations discretized with the finite volume method can easily be transformed into electrical circuits, because of that, FVM may be a better choice to develop a model-based control strategy for the PTRUSM. Copyright © 2017 Elsevier B.V. All rights reserved.
Directory of Open Access Journals (Sweden)
Zeyad Ghaleb Al-Mekhlafi
Full Text Available Recently, Pulse Coupled Oscillator (PCO-based travelling waves have attracted substantial attention by researchers in wireless sensor network (WSN synchronization. Because WSNs are generally artificial occurrences that mimic natural phenomena, the PCO utilizes firefly synchronization of attracting mating partners for modelling the WSN. However, given that sensor nodes are unable to receive messages while transmitting data packets (due to deafness, the PCO model may not be efficient for sensor network modelling. To overcome this limitation, this paper proposed a new scheme called the Travelling Wave Pulse Coupled Oscillator (TWPCO. For this, the study used a self-organizing scheme for energy-efficient WSNs that adopted travelling wave biologically inspired network systems based on phase locking of the PCO model to counteract deafness. From the simulation, it was found that the proposed TWPCO scheme attained a steady state after a number of cycles. It also showed superior performance compared to other mechanisms, with a reduction in the total energy consumption of 25%. The results showed that the performance improved by 13% in terms of data gathering. Based on the results, the proposed scheme avoids the deafness that occurs in the transmit state in WSNs and increases the data collection throughout the transmission states in WSNs.
CERN. Geneva
2005-01-01
We will present a brief introduction to the physics of gravitational waves and their properties. We will review potential astrophysical sources of gravitational waves, and the physics and astrophysics that can be learned from their study. We will survey the techniques and technologies for detecting gravitational waves for the first time, including bar detectors and broadband interferometers, and give a brief status report on the international search effort, with special emphasis on the LIGO detectors and search results.
Metabolomics and lipidomics using traveling-wave ion mobility mass spectrometry.
Paglia, Giuseppe; Astarita, Giuseppe
2017-04-01
Metabolomics and lipidomics aim to profile the wide range of metabolites and lipids that are present in biological samples. Recently, ion mobility spectrometry (IMS) has been used to support metabolomics and lipidomics applications to facilitate the separation and the identification of complex mixtures of analytes. IMS is a gas-phase electrophoretic technique that enables the separation of ions in the gas phase according to their charge, shape and size. Occurring within milliseconds, IMS separation is compatible with modern mass spectrometry (MS) operating with microsecond scan speeds. Thus, the time required for acquiring IMS data does not affect the overall run time of traditional liquid chromatography (LC)-MS-based metabolomics and lipidomics experiments. The addition of IMS to conventional LC-MS-based metabolomics and lipidomics workflows has been shown to enhance peak capacity, spectral clarity and fragmentation specificity. Moreover, by enabling determination of a collision cross-section (CCS) value-a parameter related to the shape of ions-IMS can improve the accuracy of metabolite identification. In this protocol, we describe how to integrate traveling-wave ion mobility spectrometry (TWIMS) into traditional LC-MS-based metabolomic and lipidomic workflows. In particular, we describe procedures for the following: tuning and calibrating a SYNAPT High-Definition MS (HDMS) System (Waters) specifically for metabolomics and lipidomics applications; extracting polar metabolites and lipids from brain samples; setting up appropriate chromatographic conditions; acquiring simultaneously m/z, retention time and CCS values for each analyte; processing and analyzing data using dedicated software solutions, such as Progenesis QI (Nonlinear Dynamics); and, finally, performing metabolite and lipid identification using CCS databases and TWIMS-derived fragmentation information.
Region-wide synchrony and traveling waves of dengue across eight countries in Southeast Asia.
van Panhuis, Willem G; Choisy, Marc; Xiong, Xin; Chok, Nian Shong; Akarasewi, Pasakorn; Iamsirithaworn, Sopon; Lam, Sai K; Chong, Chee K; Lam, Fook C; Phommasak, Bounlay; Vongphrachanh, Phengta; Bouaphanh, Khamphaphongphane; Rekol, Huy; Hien, Nguyen Tran; Thai, Pham Quang; Duong, Tran Nhu; Chuang, Jen-Hsiang; Liu, Yu-Lun; Ng, Lee-Ching; Shi, Yuan; Tayag, Enrique A; Roque, Vito G; Lee Suy, Lyndon L; Jarman, Richard G; Gibbons, Robert V; Velasco, John Mark S; Yoon, In-Kyu; Burke, Donald S; Cummings, Derek A T
2015-10-20
Dengue is a mosquito-transmitted virus infection that causes epidemics of febrile illness and hemorrhagic fever across the tropics and subtropics worldwide. Annual epidemics are commonly observed, but there is substantial spatiotemporal heterogeneity in intensity. A better understanding of this heterogeneity in dengue transmission could lead to improved epidemic prediction and disease control. Time series decomposition methods enable the isolation and study of temporal epidemic dynamics with a specific periodicity (e.g., annual cycles related to climatic drivers and multiannual cycles caused by dynamics in population immunity). We collected and analyzed up to 18 y of monthly dengue surveillance reports on a total of 3.5 million reported dengue cases from 273 provinces in eight countries in Southeast Asia, covering ∼ 10(7) km(2). We detected strong patterns of synchronous dengue transmission across the entire region, most markedly during a period of high incidence in 1997-1998, which was followed by a period of extremely low incidence in 2001-2002. This synchrony in dengue incidence coincided with elevated temperatures throughout the region in 1997-1998 and the strongest El Niño episode of the century. Multiannual dengue cycles (2-5 y) were highly coherent with the Oceanic Niño Index, and synchrony of these cycles increased with temperature. We also detected localized traveling waves of multiannual dengue epidemic cycles in Thailand, Laos, and the Philippines that were dependent on temperature. This study reveals forcing mechanisms that drive synchronization of dengue epidemics on a continental scale across Southeast Asia.
Oversized 250 GHz Traveling Wave Tube with a Photonic Band-Gap Structure
Rosenzweig, Guy; Shapiro, Michael A.; Temkin, Richard J.
2017-10-01
The challenge in manufacturing traveling wave tubes (TWTs) at high frequencies is that the sizes of the structures scale with, and are much smaller than, the wavelength. We have designed and are building a 250 GHz TWT that uses an oversized structure to overcome fabrication and power handling issues that result from the small dimensions. Using a photonic band-gap (PBG) structure, we succeeded to design the TWT with a beam tunnel diameter of 0.72 mm. The circuit consists of metal plates with the beam tunnel drilled down their center. Twelve posts are protruding on one side of each plate in a triangular array and corresponding sockets are drilled on the other side. The posts of each plate are inserted into the sockets of an adjacent plate, forming a PBG lattice. The vacuum spacing between adjacent plates forms the `PBG cavity''. The full structure is a series of PBG coupled cavities, with microwave power coupling through the beam tunnel. The PBG lattice provides confinement of microwave power in each of the cavities and can be tuned to give the right amount of diffraction per cavity so that no sever is needed to suppress oscillations in the operating mode. CST PIC simulations predict over 38 dB gain with 67 W peak power, using a 30 kV, 310 mA electron beam, 0.6 mm in diameter. Research supported by the AFOSR Program on Plasma and Electro-Energetic Physics and by the NIH National Institute of Biomedical Imaging and Bioengineering.
Destgeer, Ghulam; Ha, Byung Hang; Park, Jinsoo; Jung, Jin Ho; Alazzam, Anas; Sung, Hyung Jin
2015-05-05
We demonstrate a miniaturized acoustofluidic device composed of a pair of slanted interdigitated transducers (SIDTs) and a polydimethylsiloxane microchannel for achieving size-selective separation and exchange of medium around polystyrene particles in a continuous, label-free, and contactless fashion. The SIDTs, deposited parallel to each other, produce tunable traveling surface acoustic waves (TSAWs) at desired locations, which, in turn, yield an anechoic corner inside the microchannel that is used to selectively deflect particles of choice from their streamlines. The TSAWs with frequency fR originating from the right SIDT and propagating left toward the microchannel normal to the fluid flow direction, laterally deflect larger particles with diameter d1 from the hydrodynamically focused sample fluid that carries other particles as well with diameters d2 and d3, such that d1 > d2 > d3. The deflected particles (d1) are pushed into the top-left corner of the microchannel. Downstream, the TSAWs with frequency fL, such that fL > fR, disseminating from the left SIDT, deflect the medium-sized particles (d2) rightward, leaving behind the larger particles (d1) unaffected in the top-left anechoic corner and the smaller particles (d3) in the middle of the microchannel, thereby achieving particle separation. A particle not present in the anechoic corner could be deflected rightward to realize twice the medium exchange. In this work, the three-way separation of polystyrene particles with diameters of 3, 4.2, and 5 μm and 3, 5, and 7 μm is achieved using two separate devices. Moreover, these devices are used to demonstrate multimedium exchange around polystyrene particles ∼5 μm and 7 μm in diameter.
Papazoglou, Dimitris G.; Fedorov, Vladimir Yu.; Tzortzakis, Stelios
2016-01-01
We show the existence of a family of waves that share a common interesting property affecting the way they propagate and focus. These waves are a superposition of twin waves, which are conjugate to each other under inversion of the propagation direction. In analogy to holography, these twin "real" and "virtual" waves are related respectively to the converging and the diverging part of the beam and can be clearly visualized in real space at two distinct foci under the action of a focusing lens...
2005-01-01
tut quiz Tutorial Quiz Interactive Media Element This interactive tutorial reviews the mechanisms of Rossby waves. Rossby waves in both the northern and southern hemispheres are considered. The interactions involve answering simple fill-in-the-blank questions. Diagrams are used to illustrate some of the concepts reviewed. MR4322 Dynamic Meteorology
DEFF Research Database (Denmark)
Tedd, James; Kofoed, Jens Peter; Friis-Madsen, Erik
2008-01-01
Since March 2003 a prototype of Wave Dragon has been tested in an inland sea in Denmark. This has been a great success with all subsystems tested and improved through working in an offshore environment. The project has proved the Wave Dragon device and has enabled the next stage, a production sized...
DEFF Research Database (Denmark)
Kramer, Morten; Brorsen, Michael; Frigaard, Peter
Nærværende rapport beskriver numeriske beregninger af den hydrodynamiske interaktion mellem 5 flydere i bølgeenergianlægget Wave Star.......Nærværende rapport beskriver numeriske beregninger af den hydrodynamiske interaktion mellem 5 flydere i bølgeenergianlægget Wave Star....
Sassi, Fabrizio; Liu, Han-Li; Emmert, John T.
2016-02-01
The effects of breaking of traveling, planetary scale Rossby waves (TPWs) in the lower thermosphere are investigated with respect to the mixing of neutral constituents. We use numerical simulations of the Whole Atmosphere Community Climate Model, eXtended version, whose meteorology below 92 km is constrained by atmospheric specifications obtained from operational weather forecast/data assimilation system. The Fourier spectra show that the amplitude of TPWs with periods between 3 and 10 days are statistically significant in some years; the amplitude and phase of the band-pass filtered behavior is consistent with the behavior of the 5 day wave. A wavelet analysis using the S-transform shows that large variations with periods between 3 and 10 days can occur in relatively narrow temporal windows (20-30 days) during boreal winter. The momentum flux entering the lower thermosphere during the times of TPW amplification is shown to be large, and the amplifications of the TPWs in the thermosphere are not always associated with stratospheric sudden warming. The subtropical zonal accelerations are consistent with Rossby wave encountering a surf zone at low latitudes, resulting in wave breaking. The zonal acceleration is shown to be associated with a meridional diffusion, which is largest in the lower thermosphere where the wave activity and the wave breaking are also large. The ultimate effect on neutral density and composition is a meridional, down-gradient mixing; although this horizontal diffusion is largest below 110 km, the effects on the composition are amplified with increasing altitude, due to the diffusive separation of the thermosphere.
Energy Technology Data Exchange (ETDEWEB)
Shu, Guoxiang; Wang, Jianxun; Liu, Guo; Yang, Liya; Luo, Yong [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China); Wang, Shafei [North Electronic Device Research Institution, P.O. Box 947, Beijing 100141 (China)
2015-06-15
Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under −15 dB, transmission up to −1.5 dB, and meanwhile isolation under −20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation.
Shu, Guoxiang; Wang, Jianxun; Liu, Guo; Yang, Liya; Luo, Yong; Wang, Shafei
2015-06-01
Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under -15 dB, transmission up to -1.5 dB, and meanwhile isolation under -20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation.
Obayashi, Masayuki; Ishihara, Yasushi; Suetsugu, Daisuke
2017-03-01
We conducted synthetic experiments to evaluate the effects of shallow-layer reverberation in oceanic regions on P-wave travel times measured by waveform cross-correlation. Time shift due to waveform distortion by the reverberation was estimated as a function of period. Reverberations in the crystalline crust advance the P-waves by a frequency-independent time shift of about 0.3 s in oceans. Sediment does not affect the time shifts in the mid-ocean regions, but effects as large as -0.8 s or more occur where sediment thickness is greater than 600 m for periods longer than 15 s. The water layer causes time delays (+0.3 s) in the relatively shallow (seismic tomography. We propose a simple method to correct relative P-wave travel times at two sites for shallow-layer reverberation by the cross-convolution of the crustal responses at the two sites. [Figure not available: see fulltext. Caption: .
Time Travel: The Role of Temporality in Enabling Semantic Waves in Secondary School Teaching
Matruglio, Erika; Maton, Karl; Martin, J. R.
2013-01-01
Based on the theoretical understandings from Legitimation Code Theory (Maton, 2013) and Systemic Functional Linguistics (Martin, 2013) underpinning the research discussed in this special issue, this paper focuses on classroom pedagogy to illustrate an important strategy for making semantic waves in History teaching, namely "temporal shifting". We…
Ramins, Peter; Ebihara, Ben
1989-03-01
A small, isotropic graphite electrode, multistage depressed collector (MDC) was designed, fabricated, and evaluated in conjunction with a 500-W, continuous wave (CW), 4.8- to 9.6-GHz traveling-wave tube (TWT). The carbon electrode surfaces were used to improve the TWT overall efficiency by minimizing the secondary electron emission losses in the MDC. The design and fabrication of the brazed graphite MDC assembly are described. The brazing technique, which used copper braze filler metal, is compatible with both vacuum and the more commonly available hydrogen atmosphere brazing furnaces. The TWT and graphite electrode MCC bakeout, processing, and outgassing characteristics were evaluated and found to be comparable to TWT's equipped with copper electrode MDC's. The TWT and MDC performance was optimized for broadband CW operation at saturation. The average radiofrequency (RF), overall, and MDC efficiencies were 14.9, 46.4, and 83.6 percent, respectively, across the octave operating band. A 1500-hr CW test, conducted without the use of an appendage ion pump, showed no gas buildup and excellent stability of the electrode surfaces.
Ebihara, Ben T.; Ramins, Peter; Peet, Shelly
1987-01-01
A simple method of improving the traveling-wave-tube (TWT) and multistage depressed collector (MDC) efficiency has been demonstrated. The efficiency improvement was produced by the application of a thin layer of carbon to the copper electrodes of the MDC by means of a rapid, low-cost technique involving the pyrolysis of hydrocarbon oil in electric arc discharges. Experimental results with a representative TWT and MDC showed an 11 percent improvement in both the TWT and MDC efficiencies as compared to those of the same TWT and MDC efficiencies with bare copper electrode surfaces. An extended test with a 500-W, continuous wave (CW) TWT and small-sized MDC indicated good stability of the carbon coated electrode surfaces after a relatively small initial degradation in TWT overall and apparent MDC efficiencies.
Theory of fads: Traveling-wave solution of evolutionary dynamics in a one-dimensional trait space
Lee, Mi Jin; Yi, Su Do; Kim, Beom Jun; Baek, Seung Ki
2015-01-01
We consider an infinite-sized population where an infinite number of traits compete simultaneously. The replicator equation with a diffusive term describes time evolution of the probability distribution over the traits due to selection and mutation on a mean-field level. We argue that this dynamics can be expressed as a variant of the Fisher equation with high-order correction terms. The equation has a traveling-wave solution, and the phase-space method shows how the wave shape depends on the correction. We compare this solution with empirical time-series data of given names in Quebec, treating it as a descriptive model for the observed patterns. Our model explains the reason that many names exhibit a similar pattern of the rise and fall as time goes by. At the same time, we have found that their dissimilarities are also statistically significant.
Theory of fads: traveling-wave solution of evolutionary dynamics in a one-dimensional trait space.
Lee, Mi Jin; Yi, Su Do; Kim, Beom Jun; Baek, Seung Ki
2015-01-01
We consider an infinite-sized population where an infinite number of traits compete simultaneously. The replicator equation with a diffusive term describes time evolution of the probability distribution over the traits due to selection and mutation on a mean-field level. We argue that this dynamics can be expressed as a variant of the Fisher equation with high-order correction terms. The equation has a traveling-wave solution, and the phase-space method shows how the wave shape depends on the correction. We compare this solution with empirical time-series data of given names in Quebec, treating it as a descriptive model for the observed patterns. Our model explains the reason that many names exhibit a similar pattern of the rise and fall as time goes by. At the same time, we have found that their dissimilarities are also statistically significant.
Barnoud, A.; Coutant, O.; Bouligand, C.
2016-12-01
We aim at jointly inverting surface wave dispersion curves, earthquake travel times and gravimetric data to image the 3D structure of the volcanic island of Basse-Terre in Guadeloupe (Lesser Antilles). Imaging the 3D structure of this island is challenging, in particular due to the rough topography, the difficult access associated with the dense vegetation and the high level of seismic noise associated with tropical climate. The joint inversion of different types of data allows to derive a model compatible with all datasets, improving the resolution of the resulting model, due to the intrinsic sensitivities of the methods and to the different data coverages. Surface wave dispersion curves were obtained from ambient noise cross-correlations and provide seismic velocities with a good resolution in the upper 4 to 6 km. Travel times from the Lesser Antilles earthquake catalogue (CDSA/IPGP, Massin et al. 2013, Massin et al. 2014) are also included to improve the resolution at depth. Five datasets of terrestrial gravimetric data covering the whole island are available (Coron et al. 1975, Barthes et al. 1984, Gunawan 2005, Matthieu et al. 2011, Barnoud et al. 2016), constraining mostly the shallow lateral density variations. However coupling such datasets is not straightforward as it requires defining a coupling, a discretization and an inversion scheme adapted to the three methods. Our problem is coupled via the surface wave data and a P-wave velocity/density relationship (Carlson & Raskin 1984). We regularize the inverse problem using a Bayesian formalism (Tarantola & Valette 1982) and we discuss the advantages and limitations of two approaches to model the velocities of the subsurface: 1) a grid of nodes regularly spaced and 2) a Lagrangian interpolation on Gauss-Chebychev colocation nodes, equivalent to the use of a base of Chebychev polynomials (Boyd 2001). This work leads to the first 3D seismic velocity model of the island of Basse-Terre and therefore constitute a
Fredericks, R. W.
1980-01-01
Topics included in the WISP science objectives are: (1) VLF wave injection experiments; (2) traveling ionospheric disturbances and atmospheric gravity waves; (3) ionospheric bubbles; and (4) plasma wave physics. Flow charts of the WISP investigation organization, the project life cycle and the instrumentation are given.
Simons, Rainee N.; Wilson, Jeffrey D.; Force, Dale A.
2008-01-01
Recent advances in high power and efficiency space traveling-wave tube amplifiers (TWTAs) for NASA s space-to-Earth communications are presented in this paper. The RF power and efficiency of a new K-Band amplifier are 40 W and 50 percent and that of a new Ka-Band amplifier are 200 W and 60 percent. An important figure-of-merit, which is defined as the ratio of the RF power output to the mass (W/kg) of a TWT has improved by a factor of ten over the previous generation Ka-Band devices.
Simons, Rainee N.; Wintucky, Edwin G.
2017-01-01
The paper presents the design, fabrication, and test results for a novel waveguide multimode directional coupler (MDC). The coupler fabricated from dissimilar frequency band waveguides, is capable of isolating power at the 2nd harmonic frequency from the fundamental power at the output port of a high power traveling-wave tube amplifier. The major advantage of the MDC is significantly lower insertion loss compared to a diplexer. The presentation slides for the paper that was approved is attached. The tracking number for the paper that was approved is TN 37015.
Energy Technology Data Exchange (ETDEWEB)
Estevez, P G [Departamento de Fisica Fundamental, Area de Fisica Teorica, Universidad de Salamanca, 37008 Salamanca (Spain); Kuru, S [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain); Negro, J [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain); Nieto, L M [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, 47071 Valladolid (Spain)
2006-09-15
The travelling wave solutions of the two-dimensional Korteweg-de Vries-Burgers and Kadomtsev-Petviashvili equations are studied from two complementary points of view. The first one is an adaptation of the factorization technique that provides particular as well as general solutions. The second one applies the Painleve analysis to both equations, throwing light on some aspects of the first method and giving an explanation to some restriction on the coefficients, as well as the relation between factorizations and integrals of motion.
Christensen, J. A.; Tammaru, I.
1974-01-01
The design, development, and test results are reported for an experimental PPM focused, traveling-wave tube that produces 235 watts of CW RF power over 85 MHz centered at 12.080 GHz. The tube uses a coupled cavity RF circuit with a velocity taper for greater than 30 percent basic efficiency. Overall efficiency of 51 percent is achieved by means of a nine stage depressed collector designed at NASA Lewis Research Center. This collector is cooled by direct radiation to deep space.
Aleiner, Igor L.; Faoro, Lara; Ioffe, Lev B.
2016-12-01
We extend the Keldysh technique to enable the computation of out-of-time order correlators such as . We show that the behavior of these correlators is described by equations that display initially an exponential instability which is followed by a linear propagation of the decoherence between two initially identically copies of the quantum many body systems with interactions. At large times the decoherence propagation (quantum butterfly effect) is described by a diffusion equation with non-linear dissipation known in the theory of combustion waves. The solution of this equation is a propagating non-linear wave moving with constant velocity despite the diffusive character of the underlying dynamics. Our general conclusions are illustrated by the detailed computations for the specific models describing the electrons interacting with bosonic degrees of freedom (phonons, two-level-systems etc.) or with each other.
Traveling at the Speed of Thought: Proving the Existence of Gravitational Waves
Kennefick, Daniel
2007-04-01
Gravitational Waves represent a nearly unique instance of unfinished business in the history of modern physics. One of the slew of novel concepts which arose in the revolutionary period of the early 20th century, they retained their place in the new physics for nearly a century in the total absence of any kind of experimental confirmation. It was only natural, therefore, that their theoretical development was marked by repeated debate over whether they really existed, or played any kind of role in astrophysical systems such as binary stars. The course of these controversies (including the quadrupole formula controversy) is briefly recounted, and it is argued that both confidence in and skepticism of their existence were nourished by the nature of the analogy with electromagnetic waves which enabled their conceptualization in the first place.
Development of a 39.5 GHz Karp traveling wave tube for use in space
Jacquez, A.; Wilson, D.
1988-10-01
A millimeter-wave TWT was developed using a dispersive, high-impedance forward wave interaction structure based on a ladder, with non-space-harmonic interaction, for a tube with high gain per inch and high efficiency. The 'Tunneladder' interaction structure combines ladder properties modified to accommodate Pierce gun beam optics on a radially magnetized PM focusing structure. The development involved the fabrication of chemically milled, shaped ladders diffusion brazed to each ridge of a double ridged waveguide. Cold-test data are presented, representing the omega-Beta and impedance characteristics of the modified ladder circuit These results were used in small and large-signal computer programs to predict TWT gain and efficiency. A laboratory model tube was designed and fabricated, including all major subassemblies.
Development of a 39.5 GHz Karp traveling wave tube for use in space
Jacquez, A.; Wilson, D.
1988-01-01
A millimeter-wave TWT was developed using a dispersive, high-impedance forward wave interaction structure based on a ladder, with non-space-harmonic interaction, for a tube with high gain per inch and high efficiency. The 'Tunneladder' interaction structure combines ladder properties modified to accommodate Pierce gun beam optics on a radially magnetized PM focusing structure. The development involved the fabrication of chemically milled, shaped ladders diffusion brazed to each ridge of a double ridged waveguide. Cold-test data are presented, representing the omega-Beta and impedance characteristics of the modified ladder circuit These results were used in small and large-signal computer programs to predict TWT gain and efficiency. A laboratory model tube was designed and fabricated, including all major subassemblies.
Tango waves in a bidomain model of fertilization calcium waves
Li, Yue-Xian
2003-12-01
Fertilization of an egg cell is marked by one or several Ca 2+ waves that travel across the intra-cellular space, called fertilization Ca 2+ waves. Patterns of Ca 2+ waves observed in mature or immature oocytes include traveling fronts and pulses as well as concentric and spiral waves. These patterns have been studied in other excitable media in physical, chemical, and biological systems. Here, we report the discovery of a new wave phenomenon in the numerical study of a bidomain model of fertilization Ca 2+ waves. This wave is a front that propagates in a back-and-forth manner that resembles the movement of tango dancers, thus is called a tango wave. When the medium is excitable, a forward-moving tango wave can generate traveling pulses that propagate down the space without reversal. The study shows that the occurrence of tango waves is related to spatial inhomogeneity in the local dynamics. This is tested and confirmed by simulating similar waves in a medium with stationary spatial inhomogeneity. Similar waves are also obtained in a FitzHugh-Nagumo system with a linear spatial ramp. In both the bidomain model of Ca 2+ waves and the FitzHugh-Nagumo system, the front is stable when the slope of a linear ramp is large. As the slope decreases beyond a critical value, front oscillations occur. The study shows that tango waves facilitate the dispersion of localized Ca 2+. Key features of the bidomain model underlying the occurrence of tango waves are revealed. These features are commonly found in egg cells of a variety of species. Thus, we predict that tango waves can occur in real egg cells provided that a slowly varying inhomogeneity does occur following the sperm entry. The observation of tango wave-like waves in nemertean worm and ascidian eggs seems to support such a prediction.
Traveling waves and spreading speed on a lattice model with age structure
Directory of Open Access Journals (Sweden)
Zongyi Wang
2012-09-01
Full Text Available In this article, we study a lattice differential model for a single species with distributed age-structure in an infinite patchy environment. Using method of approaches by Diekmann and Thieme, we develop a comparison principle and construct a suitable sub-solution to the given model, and show that there exists a spreading speed of the system which in fact coincides with the minimal wave speed.
The influence of cochlear traveling wave and neural adaptation on auditory brainstem responses
DEFF Research Database (Denmark)
Junius, D.; Dau, Torsten
2005-01-01
), disparities occurred between the responses, reflecting a nonlinearity in the processing when neural activity is integrated across frequency. In the third experiment, the effect of within-train rate on wave-V response was investigated. The response to the chirp presented at a within-train rate of 95 Hz...... processing in the human auditory system. The findings might also be useful for the development of effective stimulation paradigms in clinical applications....
Berg, Ward; Smit, Han
2007-01-01
textabstractThis paper explains why consolidation acquisitions occur in waves and it predicts the differing role each firm is likely to play in the consolidation game. We propose that whether a firm assumes the role of rival consolidator, target, or passive observer depends on the position of the firm relative to the entity that merges first. Our model predicts that an initial acquisition triggers a wave of follow-on acquisitions, where the process of asset accumulation by the consolidator is...
DEFF Research Database (Denmark)
Kramer, Morten; Andersen, Thomas Lykke
Nærværende rapport beskriver modelforsøg udført på Aalborg Universitet, Institut for Vand, Jord og Miljøteknik med bølgeenergianlægget Wave Star.......Nærværende rapport beskriver modelforsøg udført på Aalborg Universitet, Institut for Vand, Jord og Miljøteknik med bølgeenergianlægget Wave Star....
DEFF Research Database (Denmark)
Kramer, Morten; Frigaard, Peter
Nærværende rapport beskriver modelforsøg udført på Aalborg Universitet, Institut for Byggeri og Anlæg med bølgeenergianlæget Wave Star.......Nærværende rapport beskriver modelforsøg udført på Aalborg Universitet, Institut for Byggeri og Anlæg med bølgeenergianlæget Wave Star....
Needham, Charles E
2010-01-01
The primary purpose of this text is to document many of the lessons that have been learned during the author’s more than forty years in the field of blast and shock. The writing therefore takes on an historical perspective, in some sense, because it follows the author’s experience. The book deals with blast waves propagating in fluids or materials that can be treated as fluids. It begins by distinguishing between blast waves and the more general category of shock waves. It then examines several ways of generating blast waves, considering the propagation of blast waves in one, two and three dimensions as well as through the real atmosphere. One section treats the propagation of shocks in layered gases in a more detailed manner. The book also details the interaction of shock waves with structures in particular reflections, progressing from simple to complex geometries, including planar structures, two-dimensional structures such as ramps or wedges, reflections from heights of burst, and three-dimensional st...
DEFF Research Database (Denmark)
Frigaard, Peter; Høgedal, Michael; Christensen, Morten
The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered....
Directory of Open Access Journals (Sweden)
Rodríguez, H.
2004-06-01
Full Text Available Articles from different areas which are closely related to the modelling of the stator of travelling wave ultrasonic motors (TWUMs are reviewed in this work. Thus, important issues relevant to this problem are identified from the areas of vibration of annular plates, laminated plate theories, and modelling of piezoelectric transducers. From this integrated point of view, it becomes clear that there are some very important issues yet to be addressed in the modelling of TWUMs. Firstly, the influence of material properties and stator dimensions on output efficiency, electromechanical coupling coefficients (EMCC and maximum output energy is to be investigated in more detail. Secondly, the modelling of the electric potential field (by explicitly including the charge equation for TWUMs seems to be a must for better prediction of displacements and electric fields close to the resonance, as suggested by some recent works [1]. Moreover, the improvement of current models by using shear deformation (or higher order laminated plate theories (LPTs in conjunction with approximated methods of solution are discussed. In addition to analytical models, those works using Finite Element and Finite difference Methods (FEM and FDM for the modelling and simulation of the TWUM stator dynamics are reviewed.
En este trabajo se realiza una revisión de los trabajos de investigación realizados en diversas áreas sobre el modelado del estátor de los motores ultrasónicos de onda viajera (TWUMs. Entre los problemas relevantes que se han estudiado podemos citar la vibración de placas anulares, las teorías de placas laminadas y el modelado de transductores piezoeléctricos. A raíz de este punto de vista integral se hace manifiesto que todavía quedan asuntos importantes que estudiar en el modelado de los TWUMs. En primer lugar, la influencia de las propiedades del material y las dimensiones del estátor en la eficiencia del motor, los coeficientes de acoplamiento
Cuevas-Maraver, Jesús; Kevrekidis, Panayotis G.; Vainchtein, Anna; Xu, Haitao
2017-09-01
In this work, we provide two complementary perspectives for the (spectral) stability of solitary traveling waves in Hamiltonian nonlinear dynamical lattices, of which the Fermi-Pasta-Ulam and the Toda lattice are prototypical examples. One is as an eigenvalue problem for a stationary solution in a cotraveling frame, while the other is as a periodic orbit modulo shifts. We connect the eigenvalues of the former with the Floquet multipliers of the latter and using this formulation derive an energy-based spectral stability criterion. It states that a sufficient (but not necessary) condition for a change in the wave stability occurs when the functional dependence of the energy (Hamiltonian) H of the model on the wave velocity c changes its monotonicity. Moreover, near the critical velocity where the change of stability occurs, we provide an explicit leading-order computation of the unstable eigenvalues, based on the second derivative of the Hamiltonian H''(c0) evaluated at the critical velocity c0. We corroborate this conclusion with a series of analytically and numerically tractable examples and discuss its parallels with a recent energy-based criterion for the stability of discrete breathers.
Energy Technology Data Exchange (ETDEWEB)
Sanchez M, H.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, San Rafael Atlixco No. 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico); Francois, J. L. [UNAM, Facultad de Ingenieria, Paseo Cuauhnahuac 8532, Jiutepec 62550, Morelos (Mexico); Lopez S, R., E-mail: heribertosanchez7@hotmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)
2016-09-15
In this work the nuclear fuel burn wave in a fast traveling wave reactor (TWR) is presented, using the reduced model of the neutron diffusion equation, considering only the axial component, and the equations of the transuranic dynamics of U-Pu and a radionuclide of Pu. Two critical zones of the reactor are considered, one enriched with U-Pu called ignition zone and the other impoverished zone or of U-238, named breeding zone. Occupying Na as refrigerant within TWR, and Fe as structural material; both are present in the ignition and breeding zones. Considering as a fissile material the Pu, since by neutron capture the U is transformed into Pu, thus increasing the quantity of Pu more than that of U; in this way the fuel burn stability with the wave dynamics is understood. The calculation of the results was approached numerically to determine the temporal space evolution of the neutron flux in this system and of the main isotopes involved in the burning process. (Author)
Pal, Debashis; Chakraborty, Suman
2012-07-01
We discover that thermoviscous expansion along a traveling wave in a microfluidic channel may be capable of generating a spatially uniform flow profile in a time-averaged sense. We further delineate that the resultant complex flow characteristics, realized by virtue of an intricate interplay between thermal compression-expansion waves and temperature-dependent viscosity variations and controlled by an external heating, may be remarkably characterized by a unique thermal penetration depth scale (analogous to Debye length in electro-osmosis) and a velocity scale (analogous to the Helmholtz Smulochowski velocity in electro-osmosis) that in turn depends on the considerations of “thin” and “thick” microchannel limits, as dictated by the thermal penetration depth as compared to the lateral extent of the microfluidic channel. We show that, when the thermal penetration depth is small as compared to the channel height, a uniform velocity profile is generated in the channel in a time-averaged sense. The velocity scale characterizing this uniform flow may be represented by a function of the thermal diffusivity, volumetric expansion coefficient and thermal viscosity coefficient of the fluid, characteristic amplitude and speed of the thermal wave, as well as the channel height. Results from the present study are expected to provide valuable insights towards arresting hydrodynamic dispersion in microchannels by nonelectrochemical means, following a pH-independent route.
Wang, H.; Knepper, R.; Hossain, N.; Marthi, P.; Milithaler, J.-F.; Margala, M.
2017-10-01
In this paper a new waveguide design is proposed to be implemented as part of Ballistic Deflection Transistor (BDT) Traveling Wave Amplifier Design. The BDT is designed to be operated in the Terahertz regime. Due to its relatively low transconductance (gm=200µA/V), the entire structure will consist of ten stages, with 15 BDTs/stage, to reach a total gain of 30mA/V. In this case, the total length of the transmission line will be more than 400µm. We did the investigation for different structures and materials of the transmission line. For our Parallel Plate Dielectric Waveguide with Signal Line inserted (PPDWS) design, we are able to get an average loss of 0.46dB/mm at 0.8-1.4THz from ANSYS HFSS simulation. The return loss for input and output are better than -20dB at 0.8-1.7THz. Although it is designed for our future travelling wave amplifier, it can also be used for various other THz frequency applications.
Ragona, R.; Messiaen, A.
2016-07-01
For the central heating of a fusion reactor ion cyclotron radio frequency heating (ICRH) is the first choice method as it is able to couple RF power to the ions without density limit. The drawback of this heating method is the problem of excitation of the magneto-sonic wave through the plasma boundary layer from the antenna located along the wall, without exceeding its voltage standoff. The amount of coupling depends on the antenna excitation and the surface admittance at the antenna output due to the plasma profile. The paper deals with the optimization of the antenna excitation by the use of sections of traveling-wave antennas (TWAs) distributed all along the reactor wall between the blanket modules. They are mounted and fed in resonant ring system(s). First, the physics of the coupling of a strap array is studied by simple models and the coupling code ANTITER II. Then, after the study of the basic properties of a TWA section, its feeding problem is solved by hybrids driving them in resonant ring circuit(s). The complete modeling is obtained from the matrices of the TWA sections connected to one of the feeding hybrid(s). The solution is iterated with the coupling code to determine the loading for a reference low-coupling ITER plasma profile. The resulting wave pattern up to the plasma bulk is derived. The proposed system is totally load resilient and allows us to obtain a very selective exciting wave spectrum. A discussion of some practical implementation problems is added.
Efficient Wave Energy Amplification with Wave Reflectors
Kramer, Morten Mejlhede; Frigaard, Peter Bak
2002-01-01
Wave Energy Converters (WEC's) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased to approximately 130-140%. In the paper a procedure for calculating the efficiency and optimizing the geometry of wave reflectors are described, this by use of a 3D boundary element method. The calculations are verified ...
Crustal velocity structure of the Apennines (Italy from P-wave travel time tomography
Directory of Open Access Journals (Sweden)
A. Amato
1996-06-01
Full Text Available In this paper we provide P-wave velocity images of the crust underneath the Apennines (Italy, focusing on the lower crustal structure and the Moho topography. We inverted P-wave arrival times of earthquakes which occurred from 1986 to 1993 within the Apenninic area. To overcome inversion instabilities due to noisy data (we used bulletin data we decided to resolve a minimum number of velocity parameters, inverting for only two layers in the crust and one in the uppermost mantle underneath the Moho. A partial inversion of only 55% of the overall dataset yields velocity images similar to those obtained with the whole data set, indicating that the depicted tomograms are stable and fairly insensitive to the number of data used. We find a low-velocity anomaly in the lower crust extending underneath the whole Apenninic belt. This feature is segmented by a relative high-velocity zone in correspondence with the Ortona-Roccamonfina line, that separates the northern from the southern Apenninic arcs. The Moho has a variable depth in the study area, and is deeper (more than 37 km in the Adriatic side of the Northern Apennines with respect to the Tyrrhenian side, where it is found in the depth interval 22-34 km.
Directory of Open Access Journals (Sweden)
Zheng-Johansson J. X.
2006-10-01
Full Text Available The electromagnetic component waves, comprising together with their generating oscillatory massless charge a material particle, will be Doppler shifted when the charge hence particle is in motion, with a velocity v, as a mere mechanical consequence of the source motion. We illustrate here that two such component waves generated in opposite directions and propagating at speed c between walls in a one-dimensional box, superpose into a traveling beat wave of wavelength Λd=vcΛ and phase velocity c2/v+v which resembles directly L. de Broglie’s hypothetic phase wave. This phase wave in terms of transmitting the particle mass at the speed v and angular frequency Ωd= 2πv/Λd, with Λd and Ωd obeying the de Broglie relations, represents a de Broglie wave. The standing-wave function of the de Broglie (phase wave and its variables for particle dynamics in small geometries are equivalent to the eigen-state solutions to Schrödinger equation of an identical system.
Viswanathan, Koushik; Sundaram, Narayan; Chandrasekar, Srinivasan
Stick-slip, manifest as intermittent tangential motion between two dry solid surfaces, is a friction instability that governs diverse phenomena from automobile brake squeals to earthquakes. We show, using high-speed in situ imaging of an adhesive polymer interface, that low velocity stick-slip is fundamentally of three kinds, corresponding to passage of three different surface waves -- separation pulses, slip pulses and the well-known Schallamach waves. These waves, traveling much slower than elastic waves, have clear distinguishing properties. Separation pulses and Schallamach waves involve local interface separation, and propagate in opposite directions while slip pulses are characterized by a sharp stress front and do not display any interface detachment. A change in the stick-slip mode from separation to slip pulse is effected simply by increasing the normal force. Together, these three waves constitute all possible stick-slip modes in adhesive friction and are shown to have direct analogues in muscular locomotory waves in soft bodied invertebrates. A theory for slow wave propagation is also presented which is capable of explaining the attendant interface displacements, velocities and stresses.
Indian Academy of Sciences (India)
IAS Admin
(2). Hence, small amplitude waves are also called linear waves. Most of the aspects of the ocean waves can be explained by the small amplitude wave theory. Let us now see the water particle motion due to waves. While wave energy is carried by the wave as it progresses forward, the water particles oscillate up and down.
Starinshak, David P.; Smith, Nathan D.; Wilson, Jeffrey D.
2008-01-01
The electromagnetic effects of conventional dielectrics, anisotropic dielectrics, and metamaterials were modeled in a terahertz-frequency folded-waveguide slow-wave circuit. Results of attempts to utilize these materials to increase efficiency are presented.
Shallow Water Waves and Solitary Waves
Hereman, Willy
2013-01-01
Encyclopedic article covering shallow water wave models used in oceanography and atmospheric science. Sections: Definition of the Subject; Introduction and Historical Perspective; Completely Integrable Shallow Water Wave Equations; Shallow Water Wave Equations of Geophysical Fluid Dynamics; Computation of Solitary Wave Solutions; Numerical Methods; Water Wave Experiments and Observations; Future Directions, and Bibliography.
Wave groups in unidirectional surface wave models
van Groesen, Embrecht W.C.
1998-01-01
Uni-directional wave models are used to study wave groups that appear in wave tanks of hydrodynamic laboratories; characteristic for waves in such tanks is that the wave length is rather small, comparable to the depth of the layer. In second-order theory, the resulting Nonlinear Schrödinger (NLS)
Directory of Open Access Journals (Sweden)
Hamed Faghanpour Ganji
2016-09-01
Full Text Available The present study further examines two recent semi-analytic methods, a reduced order of nonlinear differential transformation method (also called RDTM and differential transformation method along with Pade approximation to discuss Jaulent–Miodek and coupled Whitham–Broer–Kaup equations. The basic ideas of these methods are briefly introduced and performance of the proposed methods for above mentioned equations is evaluated via comparing with exact solution. The results illustrate that the so-called DTM method, unlike RDTM, due to the presence of secular terms (similar to perturbation method, cannot be found practical for nonlinear partial differential equations (particularly in Acoustic and Wave propagation problems even through utilizing Pade approximation; meanwhile, RDTM method, despite its simplicity and rapid convergence, assured a significant accuracy and great agreement, and thus it is fair to say that nonlinear problems together with Acoustic application which cannot be solved via Analytical methods, can be studied with reduced order of nonlinear differential transformation method.
DEFF Research Database (Denmark)
Kramer, Morten; Frigaard, Peter
På foranledning af Löwenmark F.R.I, er der udført numeriske beregninger af Wave Dragons (herefter WD) armes effektivitet for forskellige geometriske udformninger. 5 geometriske modeller, hvor WD's arme er forkortet/forlænget er undersøgt for 3 forskellige drejninger af armene. I alt er 15...
Habib, A.; Shelke, A.; Pietsch, U.; Kundu, T.; Grill, W.
2012-04-01
Coulomb coupling has been applied for imaging of bulk and guided acoustic waves propagating in a 0.5 mm thick, z cut Lithium Niobate single-crystal. The excitation and detection of acoustic waves was performed by localized electrical field probes. The developed scheme has been applied to imaging of the transport properties of skimming longitudinal and guided acoustic waves. A short pulse of 20 ns has been used for the excitation of acoustic waves. Broadband coupling is achieved since neither mechanical nor electrical resonances are involved. The attenuation of acoustic waves in piezoelectric crystals is studied by this method. A thin film of conductive silver paint was deposited on the surface of the crystal acting as an acoustic attenuator inducing also mass loading effects and shortening of electrical fields. The group velocities of the propagating acoustic waves for both conditions, with and without the conductive silver paint film, are determined from the propagation of the acoustic wave fronts.
Yatim, Y. M.
2013-01-01
A novel family of three-dimensional travelling-wave similarity solutions describing a steadily translating slender dry patch in an infinitely wide thin fluid film on an inclined planar substrate when surface-tension effects are negligible is obtained, the flow being driven by gravity and/or a prescribed constant shear stress on the free surface of the film. For both driving mechanisms, the dry patch has a parabolic shape (which may be concave up or concave down the substrate), and the film thickness increases monotonically away from the contact lines to its uniform far-field value. The two most practically important cases of purely gravity-driven flow and of purely surface-shear-stress-driven flow are analysed separately. © 2013 AIP Publishing LLC.
Morii, Jun; Biwa, Tetsushi; Yazaki, Taichi
2014-09-01
We present theoretical solutions, based on linear acoustic theory, for axial acoustic particle velocity in an annular region of a coaxial duct. The solutions are expressed in terms of two non-dimensional parameters h/δ(ν) and R; h and δ(ν), respectively, represent the half of the spacing between two concentric ducts and the characteristic length given by kinematic viscosity of the gas and angular frequency of acoustic oscillations, and R is the radius ratio of the ducts. The validity of the solutions was verified by direct measurements using a laser Doppler velocimeter. The present results are applied to measurements of the acoustic power distribution in a traveling wave thermoacoustic engine with a coaxial duct, which provides experimental evidence for acoustic power feedback in the coaxial duct.
Mercy Latha, A.; Srivastav, V.; Gupta, R. K.; Ghosh, S. K.
2012-11-01
Traveling Wave Tubes are the unique class of microwave amplifiers with broad bandwidth, which makes it preferred for space applications. The constraints for a space application are very stringent demanding compactness and less weight. Entire size of the tube is mainly decided by the size of the collector, as it is the bulkiest component in a tube. Hence, if the size of the collector is reduced then the entire tube size will reduce. Researches reveal that in order to reduce the size of the collector, application of the magnetic field is necessary. Therefore, to study the effect of magnetic field on the collector performance, a magneto-static solver module has been developed. This paper describes the development of the magneto-static solver.
Akram, Ghazala; Batool, Fiza
2017-10-01
The (G'/G)-expansion method is utilized for a reliable treatment of space-time fractional biological population model. The method has been applied in the sense of the Jumarie's modified Riemann-Liouville derivative. Three classes of exact traveling wave solutions, hyperbolic, trigonometric and rational solutions of the associated equation are characterized with some free parameters. A generalized fractional complex transform is applied to convert the fractional equations to ordinary differential equations which subsequently resulted in number of exact solutions. It should be mentioned that the (G'/G)-expansion method is very effective and convenient for solving nonlinear partial differential equations of fractional order whose balancing number is a negative integer.
Design of a Novel High Power V-Band Helix-Folded Waveguide Cascaded Traveling Wave Tube Amplifier
Directory of Open Access Journals (Sweden)
Tianxiang Zhuge
2015-01-01
Full Text Available A design of a V-band Helix-Folded Waveguide (H-FWG cascaded traveling wave tube (TWT is presented. In this cascaded structure, a digitized nonlinear theory model is put forward first to simulate these two types of the tubes by common process. Then, an initial design principle is proposed, which can design these two different kinds of tubes universally. Using this principle, a high-gain helix TWT is carefully designed as a first stage amplifier followed by a FWG TWT to obtain high power. Simulations predict that a peak power of 800 W with saturated gain of 60 dB from 55 GHz to 60 GHz can be achieved.
Directory of Open Access Journals (Sweden)
Fabrizio Consoli
2013-07-01
Full Text Available The Single Bunch Selector (SBS will be used on the Spiral2 linear accelerator to reduce the rate of high energy bunches reaching the target with, in principle, no residual particles from the suppressed bunches. For this purpose, a pulsed electromagnetic wave will travel along the 100 Ω microstrip meander line electrode of the SBS. In this work we describe the broadband accurate characterization of the electrode electromagnetic features. The method applied here leads to the analytical determination of complex characteristic impedance, propagation constant, and group velocity from a measurement of the 50 Ω scattering parameters on the meander transmission line. Particular care is given to the de-embedding phase of the transitions required to connect the meander electrode to the measurement device.
Demonstration of a High-Order Mode Input Coupler for a 220-GHz Confocal Gyrotron Traveling Wave Tube
Guan, Xiaotong; Fu, Wenjie; Yan, Yang
2018-02-01
A design of high-order mode input coupler for 220-GHz confocal gyrotron travelling wave tube is proposed, simulated, and demonstrated by experimental tests. This input coupler is designed to excite confocal TE 06 mode from rectangle waveguide TE 10 mode over a broadband frequency range. Simulation results predict that the optimized conversion loss is about 2.72 dB with a mode purity excess of 99%. Considering of the gyrotron interaction theory, an effective bandwidth of 5 GHz is obtained, in which the beam-wave coupling efficiency is higher than half of maximum. The field pattern under low power demonstrates that TE 06 mode is successfully excited in confocal waveguide at 220 GHz. Cold test results from the vector network analyzer perform good agreements with simulation results. Both simulation and experimental results illustrate that the reflection at input port S11 is sensitive to the perpendicular separation of two mirrors. It provides an engineering possibility for estimating the assembly precision.
Gee, Anthony; Shin, Young-Min
2013-07-01
A multi-beam traveling wave amplifier designed with an overmoded staggered double grating array was examined by small signal analysis combined with simulation. Eigenmode and S-parameter analyses show that the 2 cm long slow wave structure (SWS) has 1-5 dB insertion loss over the passband (TM31 mode) with ˜28% cold bandwidth. Analytic gain calculation indicates that in the SWS, TM31-mode is amplified with 15-20 dB/beam at 64-84 GHz with three elliptical beams of 10 kV and 150 mA/beam, which was compared with particle-in-cell (PIC) simulations. PIC analysis on the analysis of instability with zero-input driving excitations demonstrated that background noises and non-operating lower order modes are noticeably suppressed by implanting equidistant dielectric absorbers; the overmoded structure only allowed the desired 3rd order mode to propagate in the structure. The designed circuit structure can be widely applied to multi-beam devices for high power RF generation.
Optimum coupling and multimode excitation of traveling-waves in a whole-body 9.4T scanner.
Geschewski, Frank H; Brenner, Daniel; Felder, Jörg; Shah, N Jon
2013-06-01
Given the absence of a body coil, the radio frequency screen of a whole-body 9.4T magnetic resonance imaging scanner can be used as a circular waveguide. In the unloaded case, the screen allows propagation of the dominant TE11- as well as the TM01-mode. In the first part of this study, the optimum coupling of a circular polarized TE11-mode was determined empirically for excitation and reception with a rectangular patch antenna. Employing full-wave simulations, two simulation models and two phantoms, different patch positions were tested to find the optimum position with respect to coupled power and homogenous excitation field. The best simulation results were validated with measurements. The second part of this study describes the design and measurements of a multimode excitation device. Using the parallel transmit system of the MR scanner, all propagable traveling wave modes could be excited and detected independently. The performance of the multimode device related to field of view, B1+-efficiency and radio frequency shimming was assessed by phantom measurements. Initial results show that three modes are sufficient to homogeneously excite regions of interest at 9.4 T. Copyright © 2012 Wiley Periodicals, Inc.
Directory of Open Access Journals (Sweden)
Ronald C. Davidson
2015-09-01
Full Text Available This paper makes use of a one-dimensional kinetic model to investigate the nonlinear longitudinal dynamics of a long coasting beam propagating through a perfectly conducting circular pipe with radius r_{w}. The average axial electric field is expressed as ⟨E_{z}⟩=-(∂/∂z⟨ϕ⟩=-e_{b}g_{0}∂λ_{b}/∂z-e_{b}g_{2}r_{w}^{2}∂^{3}λ_{b}/∂z^{3}, where g_{0} and g_{2} are constant geometric factors, λ_{b}(z,t=∫dp_{z}F_{b}(z,p_{z},t is the line density of beam particles, and F_{b}(z,p_{z},t satisfies the 1D Vlasov equation. Detailed nonlinear properties of traveling-wave and traveling-pulse (soliton solutions with time-stationary waveform are examined for a wide range of system parameters extending from moderate-amplitudes to large-amplitude modulations of the beam charge density. Two classes of solutions for the beam distribution function are considered, corresponding to: (i the nonlinear waterbag distribution, where F_{b}=const in a bounded region of p_{z}-space; and (ii nonlinear Bernstein-Green-Kruskal (BGK-like solutions, allowing for both trapped and untrapped particle distributions to interact with the self-generated electric field ⟨E_{z}⟩.
Ciufolini, I; Moschella, U; Fre, P
2001-01-01
Gravitational waves (GWs) are a hot topic and promise to play a central role in astrophysics, cosmology, and theoretical physics. Technological developments have led us to the brink of their direct observation, which could become a reality in the coming years. The direct observation of GWs will open an entirely new field: GW astronomy. This is expected to bring a revolution in our knowledge of the universe by allowing the observation of previously unseen phenomena, such as the coalescence of compact objects (neutron stars and black holes), the fall of stars into supermassive black holes, stellar core collapses, big-bang relics, and the new and unexpected.With a wide range of contributions by leading scientists in the field, Gravitational Waves covers topics such as the basics of GWs, various advanced topics, GW detectors, astrophysics of GW sources, numerical applications, and several recent theoretical developments. The material is written at a level suitable for postgraduate students entering the field.
DEFF Research Database (Denmark)
Kramer, Morten; Frigaard, Peter; Brorsen, Michael
Nærværende rapport beskriver foreløbige hovedkonklusioner på modelforsøg udført på Aalborg Universitet, Institut for Vand, Jord og Miljøteknik med bølgeenergianlægget Wave Star i perioden 13/9 2004 til 12/11 2004.......Nærværende rapport beskriver foreløbige hovedkonklusioner på modelforsøg udført på Aalborg Universitet, Institut for Vand, Jord og Miljøteknik med bølgeenergianlægget Wave Star i perioden 13/9 2004 til 12/11 2004....
Ferrarese, Giorgio
2011-01-01
Lectures: A. Jeffrey: Lectures on nonlinear wave propagation.- Y. Choquet-Bruhat: Ondes asymptotiques.- G. Boillat: Urti.- Seminars: D. Graffi: Sulla teoria dell'ottica non-lineare.- G. Grioli: Sulla propagazione del calore nei mezzi continui.- T. Manacorda: Onde nei solidi con vincoli interni.- T. Ruggeri: "Entropy principle" and main field for a non linear covariant system.- B. Straughan: Singular surfaces in dipolar materials and possible consequences for continuum mechanics
Jiang, Z
2005-01-01
The International Symposium on Shock Waves (ISSW) is a well established series of conferences held every two years in a different location. A unique feature of the ISSW is the emphasis on bridging the gap between physicists and engineers working in fields as different as gas dynamics, fluid mechanics and materials sciences. The main results presented at these meetings constitute valuable proceedings that offer anyone working in this field an authoritative and comprehensive source of reference.
Chap, Andrew; Tarditi, Alfonso G.; Scott, John H.
2013-01-01
A Particle-in-cell simulation model has been developed to study the physics of the Traveling Wave Direct Energy Converter (TWDEC) applied to the conversion of charged fusion products into electricity. In this model the availability of a beam of collimated fusion products is assumed; the simulation is focused on the conversion of the beam kinetic energy into alternating current (AC) electric power. The model is electrostatic, as the electro-dynamics of the relatively slow ions can be treated in the quasistatic approximation. A two-dimensional, axisymmetric (radial-axial coordinates) geometry is considered. Ion beam particles are injected on one end and travel along the axis through ring-shaped electrodes with externally applied time-varying voltages, thus modulating the beam by forming a sinusoidal pattern in the beam density. Further downstream, the modulated beam passes through another set of ring electrodes, now electrically oating. The modulated beam induces a time alternating potential di erence between adjacent electrodes. Power can be drawn from the electrodes by connecting a resistive load. As energy is dissipated in the load, a corresponding drop in beam energy is measured. The simulation encapsulates the TWDEC process by reproducing the time-dependent transfer of energy and the particle deceleration due to the electric eld phase time variations.
Stress wave focusing transducers
Energy Technology Data Exchange (ETDEWEB)
Visuri, S.R., LLNL
1998-05-15
Conversion of laser radiation to mechanical energy is the fundamental process behind many medical laser procedures, particularly those involving tissue destruction and removal. Stress waves can be generated with laser radiation in several ways: creation of a plasma and subsequent launch of a shock wave, thermoelastic expansion of the target tissue, vapor bubble collapse, and ablation recoil. Thermoelastic generation of stress waves generally requires short laser pulse durations and high energy density. Thermoelastic stress waves can be formed when the laser pulse duration is shorter than the acoustic transit time of the material: {tau}{sub c} = d/c{sub s} where d = absorption depth or spot diameter, whichever is smaller, and c{sub s} = sound speed in the material. The stress wave due to thermoelastic expansion travels at the sound speed (approximately 1500 m/s in tissue) and leaves the site of irradiation well before subsequent thermal events can be initiated. These stress waves, often evolving into shock waves, can be used to disrupt tissue. Shock waves are used in ophthalmology to perform intraocular microsurgery and photodisruptive procedures as well as in lithotripsy to fragment stones. We have explored a variety of transducers that can efficiently convert optical to mechanical energy. One such class of transducers allows a shock wave to be focused within a material such that the stress magnitude can be greatly increased compared to conventional geometries. Some transducer tips could be made to operate regardless of the absorption properties of the ambient media. The size and nature of the devices enable easy delivery, potentially minimally-invasive procedures, and precise tissue- targeting while limiting thermal loading. The transducer tips may have applications in lithotripsy, ophthalmology, drug delivery, and cardiology.
Quantum Emulation of Gravitational Waves.
Fernandez-Corbaton, Ivan; Cirio, Mauro; Büse, Alexander; Lamata, Lucas; Solano, Enrique; Molina-Terriza, Gabriel
2015-07-14
Gravitational waves, as predicted by Einstein's general relativity theory, appear as ripples in the fabric of spacetime traveling at the speed of light. We prove that the propagation of small amplitude gravitational waves in a curved spacetime is equivalent to the propagation of a subspace of electromagnetic states. We use this result to propose the use of entangled photons to emulate the evolution of gravitational waves in curved spacetimes by means of experimental electromagnetic setups featuring metamaterials.
Antarctic Circumpolar Wave and its Seasonality: Intrinsic Traveling Modes and ENSO Teleconnections
Wang, X.; Giannakis, D.; Slawinska, J. M.
2016-12-01
Despite global warming, recent changes in Antarctic sea ice exhibit a complex spatial structure that integrates to positive trend for the whole continent. This tendency is in stark contract with model projections and remains challenging to explain as separation of multi-scale natural variability and anthropogenic forcing is limited by the time span of the observational record. Moreover, due to the data preprocessing required by conventional data analysis techniques (e.g., EOF analysis), the results have frequently ambiguous physical interpretation. In this work, we study Antarctic sea ice variability in a millennial control integration of CCSM4 and in HadISST data using nonlinear Laplacian spectral analysis (NLSA), a nonlinear decomposition method which does not require data pre-filtering. Applied to sea ice concentration data, NLSA recovers the dominant signal that corresponds to the Antarctic Circumpolar Wave (ACW). This mode has a period of around 4-5 years, and the corresponding spatiotemporal pattern shows a clear eastward propagation around Antarctica. Two further groups of modes have frequencies consistent with the nonlinear modulation of the annual cycle by the ACW, and exhibit eastward and westward propagation, respectively. We explain the origin of these modes by establishing the teleconnection between ACW and the tropical Indo-Pacific Ocean; in particular, NLSA recovers a fundamental ENSO mode and its associated combination modes with the annual cycle that project strongly to ACW modes identified over Antarctica. Moreover, by applying multivariate analysis of SST and surface winds, we identify physical mechanisms coupling Antarctic sea ice with atmospheric and oceanic circulation over the Southern Oceans. Extensions of this work aiming to improve model fidelity and predictability of the Antarctic cryosphere are also discussed.
Shipman, Bob
2006-01-01
When children first hear the term "sound wave" perhaps they might associate it with the way a hand waves or perhaps the squiggly line image on a television monitor when sound recordings are being made. Research suggests that children tend to think sound somehow travels as a discrete package, a fast-moving invisible thing, and not something that…
REFLECTION OF ELECTROMAGNETIC WAVES FROM SOUND WAVES
The reflection of electromagnetic waves normally incident on the wavefronts of a semi-infinite standing sound wave is discussed. By analogy with the...with the sound frequency. An experiment is described in which the Bragg reflection of 3 cm electromagnetic waves from a standing sound wave beneath a water surface is observed.
Impact of Wave Dragon on Wave Climate
DEFF Research Database (Denmark)
Andersen, Thomas Lykke; Tedd, James; Kramer, Morten
This report is an advisory paper for use in determining the wave dragon effects on hydrography, by considering the effect on the wave climate in the region of a wave dragon. This is to be used in the impact assessment for the Wave Dragon pre-commercial demonstrator....
Energy Technology Data Exchange (ETDEWEB)
Ellison, James A.; Heinemann, Klaus [New Mexico Univ., Albuquerque, NM (United States). Dept. of Mathematics and Statistics; Vogt, Mathias [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany); Gooden, Matthew [North Carolina State Univ., Raleigh, NC (United States). Dept. of Physics
2013-03-15
We present a mathematical analysis of planar motion of energetic electrons moving through a planar dipole undulator, excited by a fixed planar polarized plane wave Maxwell field in the X-Ray FEL regime. Our starting point is the 6D Lorentz system, which allows planar motions, and we examine this dynamical system as the wave length {lambda} of the traveling wave varies. By scalings and transformations the 6D system is reduced, without approximation, to a 2D system in a form for a rigorous asymptotic analysis using the Method of Averaging (MoA), a long time perturbation theory. The two dependent variables are a scaled energy deviation and a generalization of the so- called ponderomotive phase. As {lambda} varies the system passes through resonant and nonresonant (NR) zones and we develop NR and near-to-resonant (NtoR) MoA normal form approximations. The NtoR normal forms contain a parameter which measures the distance from a resonance. For a special initial condition, for the planar motion and on resonance, the NtoR normal form reduces to the well known FEL pendulum system. We then state and prove NR and NtoR first-order averaging theorems which give explicit error bounds for the normal form approximations. We prove the theorems in great detail, giving the interested reader a tutorial on mathematically rigorous perturbation theory in a context where the proofs are easily understood. The proofs are novel in that they do not use a near identity transformation and they use a system of differential inequalities. The NR case is an example of quasiperiodic averaging where the small divisor problem enters in the simplest possible way. To our knowledge the planar prob- lem has not been analyzed with the generality we aspire to here nor has the standard FEL pendulum system been derived with associated error bounds as we do here. We briefly discuss the low gain theory in light of our NtoR normal form. Our mathematical treatment of the noncollective FEL beam dynamics problem in
Lermyte, Frederik; Sobott, Frank
2017-09-08
Electron transfer dissociation (ETD) is becoming increasingly important in mass spectrometry-based analysis of peptides and proteins. Supplemental collisional activation of undissociated electron transfer products can significantly increase fragmentation yield and sequence coverage, but hydrogen rearrangements - specifically, transfer of a hydrogen radical from a c to a z fragment - lead to distorted isotope distributions and increased potential for signal overlap. Concomitant collisional activation during the ion/ion reaction significantly reduces these rearrangements, but, in ion traps, also leads to lower reaction rates and reduced overlap of anion and cation clouds. In traveling-wave ion mobility devices, it has been reported - although not under ETD conditions - that significant ion activation can occur depending on the T-wave height and velocity. Here, we investigate this phenomenon in more detail using a commercial instrument (Waters Synapt G2) and report that a similar effect can be induced within the traveling-wave Trap cell where the ETD reaction occurs, using fairly typical T-wave settings. This ion 'heating' is demonstrated by analyzing the observed isotope distributions (sensitive to the aforementioned hydrogen rearrangements) of ETD fragments of ubiquitin and substance P. A more detailed investigation of ion activation using cesium iodide clusters (without ETD reagent anions present) shows that the observed behavior is consistent with the known dynamics of ions within traveling-wave devices. The insights gained in this work are potentially relevant both for 'native ETD' studies (in which tuning needs to be optimized to avoid unintentional ion activation) as well as the design of future T-wave ETD devices (where this 'heating' effect might be exploited to promote fragment release).
Gavrilyuk, S L; Sukhinin, S V
2017-01-01
Starting with the basic notions and facts of the mathematical theory of waves illustrated by numerous examples, exercises, and methods of solving typical problems Chapters 1 & 2 show e.g. how to recognize the hyperbolicity property, find characteristics, Riemann invariants and conservation laws for quasilinear systems of equations, construct and analyze solutions with weak or strong discontinuities, and how to investigate equations with dispersion and to construct travelling wave solutions for models reducible to nonlinear evolution equations. Chapter 3 deals with surface and internal waves in an incompressible fluid. The efficiency of mathematical methods is demonstrated on a hierarchy of approximate submodels generated from the Euler equations of homogeneous and non-homogeneous fluids. The self-contained presentations of the material is complemented by 200+ problems of different level of difficulty, numerous illustrations, and bibliographical recommendations.
Efficient Wave Energy Amplification with Wave Reflectors
DEFF Research Database (Denmark)
Kramer, Morten Mejlhede; Frigaard, Peter Bak
2002-01-01
Wave Energy Converters (WEC's) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased to approximately 130......-140%. In the paper a procedure for calculating the efficiency and optimizing the geometry of wave reflectors are described, this by use of a 3D boundary element method. The calculations are verified by laboratory experiments and a very good agreement is found. The paper gives estimates of possible power benifit...... for different geometries of the wave reflectors and optimal geometrical design parameters are specified. On this basis inventors of WEC's can evaluate whether a specific WEC possible could benefit from wave reflectors....
Skeletonized wave equation of surface wave dispersion inversion
Li, Jing
2016-09-06
We present the theory for wave equation inversion of dispersion curves, where the misfit function is the sum of the squared differences between the wavenumbers along the predicted and observed dispersion curves. Similar to wave-equation travel-time inversion, the complicated surface-wave arrivals in traces are skeletonized as simpler data, namely the picked dispersion curves in the (kx,ω) domain. Solutions to the elastic wave equation and an iterative optimization method are then used to invert these curves for 2D or 3D velocity models. This procedure, denoted as wave equation dispersion inversion (WD), does not require the assumption of a layered model and is less prone to the cycle skipping problems of full waveform inversion (FWI). The synthetic and field data examples demonstrate that WD can accurately reconstruct the S-wave velocity distribution in laterally heterogeneous media.
Traveling wave solutions of large-scale structures in turbulent channel flow at Reτ = 1000
Hwang, Yongyun; Willis, Ashley; Cossu, Carlo
2016-11-01
Recently, a set of stationary invariant solutions for the large-scale structures in turbulent Couette flow was computed at Reτ = 128 using an over-damped LES with the Smagorinsky model which accounts the effect of the surrounding small-scale motions. In this talk, we show that this approach can be extended to Reτ = 1000 in turbulent channel flow, towards the regime where the large-scale structures in the form of very-large-scale motions (long streaky motions) and large-scale motions (short vortical structures) energetically emerge. We demonstrate that a set of invariant solutions in the form of a traveling wave can be computed from simulations of the self-sustaining large-scale structures in the minimal unit with midplane reflection symmetry. By approximating the surrounding small scales with an artificially elevated Smagorinsky constant, a set of equilibrium states are found, labelled upper- and lower-branch according to their related wall shear stress. In particular, we will show that the upper-branch equilibrium state is a reasonable proxy for the spatial structure and the turbulent statistics of the self-sustaining large-scale structures. Engineering and Physical Sciences Research Council, UK (EP/N019342/1).
Yun, S J; Nam, K S
1998-01-01
Zinc sulfide (ZnS) and terbium-doped ZnS (ZnS:Tb) thin films were grown by traveling wave reactor atomic layer epitaxy (ALE). In the present work, ZnCl sub 2 , H sub 2 S, and tris (2,2,6,6-tetramethyl-3,5-heptandionato) terbium (Tb(tmhd) sub 3) were used as the precursors. The dependence of crystallinity and Cl content of ZnS films was investigated on the growth temperature. ZnS and ZnS:Tb films grown at temperatures ranging from 400 to 500 .deg. C showed a hexagonal-2H crystalline structure. The crystallinity of ZnS film was greatly enhanced as the temperature increased. At growth temperatures higher than 450.deg.C, the films showed preferred orientation with mainly (002) diffraction peak. The Cl content decreased from approximately 9 to 1 at.% with the increase in growth temperature from 400 to 500 .deg. C. The segregation of Cl near the surface region and the incorporation of O from Tb(tmhd) sub 3 during ALE process were also observed using Auger electron spectroscopy. The ALE-grown ZnS and ZnS:Tb films re...
Tarditi, Alfonso
2012-03-01
Due to the appeal of aneutronic fusion, a variety of reactor concepts have been proposed in past. In most cases, to achieve a positive net power balance these reactor concepts rely on a significant re-circulation of the energy produced to maintain a non-equilibrium configuration (unlike ignited plasmas). The availability of a direct conversion process with high efficiency is then critical for determining the feasibility of a reactor (particularly when the ``almost true aneutronic'' reaction like p-^11B is considered). A Traveling Wave Direct Energy Converter (TWDEC, [1]) is considered for the energy conversion of a high-density beam formed by the fusion products (MeV-range α-particles). As in [2], a PIC code is utilized for a realistic beam model. The study is focused on the possibility of obtaining high-efficiency coupling between a modulated high-density ``bunched'' beam, accounting also for a neutralizing electron environment, and the TWDEC electrode collector structure.[4pt] [1] Momota et al. (1999) Fus. Tech., 35, 60[0pt] [2] Y.Yasaka et al. (2009), Nucl. Fus., 49, 075009
Chen, M.; Ju, Y. L.
2017-07-01
Periodic and spontaneous on-off oscillation belongs to the onset and damping behaviors of thermoacoustic engines, and investigations on this phenomenon lead to better operation of the thermoacoustic engines with stable performances. In this paper, the quasi- periodic on-off oscillation in a small-scale traveling wave thermoacoustic heat engine with a resonator length of only 1 m was experimentally investigated. The type of working media, mean pressure and the input heating power are the main operating parameters, which significantly affect the formation of the periodic on-off oscillation. The experimental results demonstrated there was a critical charge pressure over which the periodic on-off oscillation could happen. For the small- scale engine with helium gas as the working media, the mean pressure threshold value was about 1.4 MPa and the on-off oscillation occurred with a single frequency. Using nitrogen and argon gas as the working media, the on-off oscillation was not observed. The reason was qualitatively analyzed as well.
Simons, Rainee N.; Force, Dale A.; Spitsen, Paul C.; Menninger, William L.; Robbins, Neal R.; Dibb, Daniel R.; Todd, Phillip C.
2010-01-01
The RF performance of a new K-Band helix conduction cooled traveling-wave tube amplifier (TWTA), is presented in this paper. A total of three such units were manufactured, tested and delivered. The first unit is currently flying onboard NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft and has flawlessly completed over 2000 orbits around the Moon. The second unit is a proto-flight model. The third unit will fly onboard NASA's International Space Station (ISS) as a very compact and lightweight transmitter package for the Communications, Navigation and Networking Reconfigurable Testbed (CoNNeCT), which is scheduled for launch in 2011. These TWTAs were characterized over the frequencies 25.5 to 25.8 GHz. The saturated RF output power is greater than 40 W and the saturated RF gain is greater than 46 dB. The saturated AM-to-PM conversion is 3.5 /dB and the small signal gain ripple is 0.46 dB peak-to-peak. The overall efficiency of the TWTA, including that of the electronic power conditioner (EPC) is as high as 45%.
Energy Technology Data Exchange (ETDEWEB)
Hamid, Ahmed M.; Garimella, Sandilya V. B.; Ibrahim, Yehia M.; Deng, Liulin; Zheng, Xueyun; Webb, Ian K.; Anderson, Gordon A.; Prost, Spencer A.; Norheim, Randolph V.; Tolmachev, Aleksey V.; Baker, Erin S.; Smith, Richard D.
2016-09-20
We report on ion mobility separations (IMS) achievable using traveling waves in a Structures for Lossless Ion Manipulations (TW-SLIM) module having a 44-cm path length and sixteen 90º turns. The performance of the TW-SLIM module was evaluated for ion transmission, and ion mobility separations with different RF, TW parameters and SLIM surface gaps in conjunction with mass spectrometry. In this work TWs were created by the transient and dynamic application of DC potentials. The TW-SLIM module demonstrated highly robust performance and the ion mobility resolution achieved even with sixteen close spaced turns was comparable to a similar straight path TW-SLIM module. We found an ion mobility peak capacity of ~ 31 and peak generation rate of 780 s-1 for TW speeds of <210 m/s using the current multi-turn TW-SLIM module. The separations achieved for isomers of peptides and tetrasaccharides were found to be comparable to those from a ~ 0.9-m drift tube-based IMS-MS platform operated at the same pressure (4 torr). The combined attributes of flexible design, low voltage requirements and lossless ion transmission through multiple turns for the present TW-SLIM module provides a basis for SLIM devices capable of achieving much greater ion mobility resolutions via greatly extended ion path lengths and compact serpentine designs that do not significantly impact the instrumentation profile, a direction described in a companion manuscript.
Hamid, Ahmed M; Garimella, Sandilya V B; Ibrahim, Yehia M; Deng, Liulin; Zheng, Xueyun; Webb, Ian K; Anderson, Gordon A; Prost, Spencer A; Norheim, Randolph V; Tolmachev, Aleksey V; Baker, Erin S; Smith, Richard D
2016-09-20
We report on ion mobility (IM) separations achievable using traveling waves (TW) in a Structures for Lossless Ion Manipulations (SLIM) module having a 44 cm path length and 16 90° turns. The performance of the TW-SLIM module was evaluated for ion transmission and IM separations with different RF, TW parameters, and SLIM surface gaps in conjunction with mass spectrometry. In this work, TWs were created by the transient and dynamic application of DC potentials. The module demonstrated highly robust performance and, even with 16 closely spaced turns, achieving IM resolution performance and ion transmission comparable to a similar straight path module. We found an IM peak capacity of ∼31 and peak generation rate of 780 s(-1) for TW speeds of ∼80 m/s using the current multi-turn TW-SLIM module. The separations achieved for isomers of peptides and tetrasaccharides were found to be comparable to those from a ∼0.9-m drift tube-based IM-MS platform operated at the same pressure (4 Torr). The combined attributes of flexible design, low voltage requirements and lossless ion transmission through multiple turns for the present TW-SLIM module provides a basis for SLIM devices capable of achieving much greater IM resolution via greatly extended ion path lengths and using compact serpentine designs.
Combination of a multimode antenna and TIAMO for traveling-wave imaging at 9.4 Tesla.
Hoffmann, Jens; Mirkes, Christian; Shajan, G; Scheffler, Klaus; Pohmann, Rolf
2016-01-01
To investigate the performance of a multimode antenna combined with time-interleaved acquisition of modes (TIAMO) for improved (1)H image homogeneity as compared to conventional traveling-wave imaging in the human brain at 9.4 Tesla (T). An adjustable three-port antenna was built to stimulate the propagation of three basic waveguide modes within a 9.4 T scanner bore. For TIAMO, two time-interleaved acquisitions using different linear combinations of these modes were optimized to achieve a homogeneous rooted sum-of-squares combination of their B1+ patterns ( B1,RSS+). The antenna's transmit and receive performance, as well as local specific absorption rate, were analyzed using experiments and numerical simulations. The optimized TIAMO B1,RSS+ combination was superior to radiofrequency shimming. Across the entire brain, it improved the homogeneity of the excitation field by a factor of two and its maximum-to-minimum ratio by almost a factor of five as compared to the circularly polarized mode. The two-fold increase in "virtual" receive channels enhanced the parallel imaging performance and enabled the use of higher acceleration factors. Despite the limited number of channels, a remote three-port antenna combined with TIAMO represents an easily implementable setup to achieve void-free (1)H images from the entire brain at 9.4 T, which can be used for anatomical localization and B0 shimming. © 2015 Wiley Periodicals, Inc.
Molnar, P.; Chen, W.-P.
1984-01-01
S-P wave travel time residuals were measured in earthquakes in Tibet and the Himalaya in order to study lateral inhomogeneities in the earth's mantle. Average S-P residuals, measured with respect to Jeffrey-Bullen (J-B) tables for 11 earthquakes in the Himalaya are less than +1 second. Average J-B S-P from 10 of 11 earthquakes in Tibet, however, are greater than +1 second even when corrected for local crustal thickness. The largest values, ranging between 2.5 and 4.9 seconds are for five events in central and northern Tibet, and they imply that the average velocities in the crust and upper mantle in this part of Tibet are 4 to 10 percent lower than those beneath the Himalaya. On the basis of the data, it is concluded that it is unlikely that a shield structure lies beneath north central Tibet unless the S-P residuals are due to structural variations occurring deeper than 250 km.
Downey, Joseph A.
2004-01-01
The Jupiter Icy Moons Orbiter (JIMO) is set to launch between the years 2012 and 2015. It will possibly utilize a nuclear reactor power source and ion engines as it travels to the moons of Jupiter. The nuclear reactor will produce hundreds of kilowatts of power for propulsion, communication and various scientific instruments. Hence, the RF amplification devices aboard will be able to operate at a higher power level and data rate. The initial plan for the communications system is for an output of 1000 watts of RF power, a data rate of at least 10 megabits a second, and a frequency of 32 GHz. A higher data rate would be ideal to fully utilize the instruments aboard JIMO. At NASA Glenn, one of our roles in the JIMO project is to demonstrate RF power combining using multiple traveling wave tubes (TWT). In order for the power of separate TWT s to be combined, the RF output waves from each must be in-phase and have the same amplitude. Since different tubes act differently, we had to characterize each tube using a Network Analyzer. We took frequency sweeps and power sweeps to characterize each tube to ensure that they will behave similarly under the same conditions. The 200 watt Dornier tubes had been optimized to run at a lower power level (120 watts) for their extensive use in the ACTS program, so we also had to experiment with adjusting the voltage settings on several internal components (helix, anode, collector) of the tubes to reach the full 200 watt potential. from the ACTS program. Phase shifters and power attenuators were placed in the waveguide circuit at the inputs to the tubes so that adjustments could be made individually to match them exactly. A magic tee was used to route and combine the amplified electromagnetic RF waves on the tube output side. The demonstration of 200 watts of combined power was successful with efficiencies greater than 90% over a 500 MHz bandwidth. The next step will be to demonstrate the use of three amplifiers using two magic tees by
Directory of Open Access Journals (Sweden)
J.C. Umavathi
2014-01-01
Full Text Available Fully developed laminar mixed convection in a corrugated vertical channel filled with two immiscible viscous fluids has been investigated. By using a perturbation technique, the coupled nonlinear equations governing the flow and heat transfer are solved. The fluids are assumed to have different viscosities and thermal conductivities. Separate solutions are matched at the interface using suitable matching conditions. The velocity, the temperature, the Nusselt number and the shear stress are analyzed for variations of the governing parameters such as Grashof number, viscosity ratio, width ratio, conductivity ratio, frequency parameter, traveling thermal temperature and are shown graphically. It is found that the Grashof number, viscosity ratio, width ratio and conductivity ratio enhance the velocity parallel to the flow direction and reduce the velocity perpendicular to the flow direction.
Wintucky, Edwin G.; Simons, Rainee N.
2015-01-01
This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler, fabricated from two dissimilar frequency band waveguides, is capable of isolating power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT) amplifier. Test results from proof-of-concept demonstrations are presented for a Ku-band/Ka-band MDC and a Ka-band/E-band MDC. In addition to power measurements at harmonic frequencies, a potential application of the MDC is in the design of a satellite borne beacon source for atmospheric propagation studies at millimeter-wave (mm-wave) frequencies (Ka-band and E-band).
Directory of Open Access Journals (Sweden)
M.G. Hafez
2016-06-01
Full Text Available In this paper, the novel (G′/G-expansion method is applied to construct exact travelling wave solutions of the cubic nonlinear Schrodinger equation. This technique is straightforward and simple to use, and gives more new general solutions than the other existing methods. Various types of solitary and periodic wave solutions of this equation are derived. The obtained results may be helpful to describe the wave propagation in soliton physics, such as soliton propagation in optical fibers, modulus instability in plasma physics, etc. and provided us the firm mathematical foundation in soliton physics or any varied instances. Furthermore, three-dimensional modules plot of the solutions are also given to visualize the dynamics of the equation.
Eberhart-Phillips, Donna; Fry, Bill
2017-08-01
We have developed a joint inversion of surface wave group velocity (U) and local earthquake travel-time (LET) data and applied it to the North Island, New Zealand, to improve the existing New Zealand wide 3-D seismic velocity model. This approach takes full advantage of the differing sensitivities of surface and body waves. The data are complementary, particularly at shallow depths where LET tomography suffers from vertical smearing and surface wave tomography is susceptible to horizontal smearing. The employed U observations are 2-D models at discrete periods which were developed for Rayleigh wave dispersion curves measured from the 1744 interstation Green's Functions obtained by stacked cross-correlations of broadband ambient noise data. In the volume surrounding each U observation, we distribute numerous points for relating the U observation to the gridded 3-D tomography model, analogous to points along a raypath. The partial derivatives at the points are computed using the U sensitivity kernels for Vp and Vs, with Vs related to Vp and Vp/Vs perturbations. Thus, the U observations are included along with the travel-time observations in a joint inversion to best fit the data and the existing tomography model. The resulting model favors the U where there is little travel-time resolution. The combined inversion used 2949 U observations at 6-16 s period and LET from 1509 earthquakes that extend to 370 km depth, and improved the model fit by reducing the U residual data variance by 62% and the LET by 9%. The resulting model generally has better constrained depth of shallow anomalies, with decreased velocity in the upper 2 km in the western North Island, and slight focusing of crustal high velocity features at 8 km depth. Significantly, the increased resolution in the shallowest 5 km of the model improves the utility of the 3-D model for use in seismic hazard assessment, wave propagation studies, and studies comparing seismic velocities to geological mapping.
Oscillating nonlinear acoustic shock waves
DEFF Research Database (Denmark)
Gaididei, Yuri; Rasmussen, Anders Rønne; Christiansen, Peter Leth
2016-01-01
We investigate oscillating shock waves in a tube using a higher order weakly nonlinear acoustic model. The model includes thermoviscous effects and is non isentropic. The oscillating shock waves are generated at one end of the tube by a sinusoidal driver. Numerical simulations show...... that at resonance a stationary state arise consisting of multiple oscillating shock waves. Off resonance driving leads to a nearly linear oscillating ground state but superimposed by bursts of a fast oscillating shock wave. Based on a travelling wave ansatz for the fluid velocity potential with an added 2'nd order...... polynomial in the space and time variables, we find analytical approximations to the observed single shock waves in an infinitely long tube. Using perturbation theory for the driven acoustic system approximative analytical solutions for the off resonant case are determined....
Directory of Open Access Journals (Sweden)
Rashida Hussain
2017-04-01
Full Text Available In this paper, Novel (Gʹ/G-expansion method is used to find new generalized exact travelling wave solutions of fractional order coupled Burger’s equations in terms of trigonometric functions, rational functions and hyperbolic functions with arbitrary parameters. For the conversion of the partial differential equation to the ordinary differential equation, complex transformation method is used. Novel (Gʹ/G-expansion method is very effective and provides a powerful mathematical tool to solve nonlinear equations. Moreover, for the representation of these exact solutions we have plotted graphs for different values of parameters which were in travelling waveform.
Deng, Liulin; Ibrahim, Yehia M.; Hamid, Ahmed M.; Garimella, Sandilya V.B.; Webb, Ian K.; Zheng, Xueyun; Prost, Spencer A; Sandoval, Jeremy A.; Norheim, Randolph V.; Anderson, Gordon A.; Tolmachev, Aleksey V.; Baker, Erin S.; Smith, Richard D.
2016-01-01
We report the development and initial evaluation of a 13 m path length Structures for Lossless Manipulations (SLIM) module for achieving high resolution separations using traveling waves (TW) with ion mobility (IM) spectrometry. The TW SLIM module was fabricated using two mirror-image printed circuit boards with appropriately configured RF, DC, and TW electrodes and positioned with a 2.75 mm intersurface gap. Ions were effectively confined in field-generated conduits between the surfaces by R...
Ellison, James A.; Heinemann, Klaus; Vogt, Mathias; Gooden, Matthew
2013-09-01
We present a mathematical analysis of planar motion of energetic electrons moving through a planar dipole undulator, excited by a fixed planar polarized plane wave Maxwell field in the x-ray free electron laser (FEL) regime. Our starting point is the 6D Lorentz system, which allows planar motions, and we examine this dynamical system as the wavelength λ of the traveling wave varies. By scalings and transformations the 6D system is reduced, without approximation, to a 2D system in a form for a rigorous asymptotic analysis using the method of averaging (MoA), a long-time perturbation theory. The two dependent variables are a scaled energy deviation and a generalization of the so-called ponderomotive phase. As λ varies the system passes through resonant and nonresonant (NonR) intervals and we develop NonR and near-to-resonant (NearR) MoA normal form approximations to the exact equations. The NearR normal forms contain a parameter which measures the distance from a resonance. For the planar motion, with the special initial condition that matches into the undulator design trajectory, and on resonance, the NearR normal form reduces to the well-known FEL pendulum system. We then state and prove NonR and NearR first-order averaging theorems which give explicit error bounds for the normal form approximations. We prove the theorems in great detail, giving the interested reader a tutorial on mathematically rigorous perturbation theory in a context where the proofs are easily understood. The proofs are novel in that they do not use a near-identity transformation and they use a system of differential inequalities. The NonR case is an example of quasiperiodic averaging where the small divisor problem enters in the simplest possible way. To our knowledge the planar problem has not been analyzed with the generality we aspire to here nor has the standard FEL pendulum system been derived with associated error bounds as we do here. We briefly discuss the low gain theory in light of
Sun, Dongming; Wang, Sheng; Hata, Seiichi; Sakurai, Junpei; Shimokohbe, Akira
2010-07-01
A novel method is presented for investigation of the traveling wave propagation generated on a thin film pipe with a short length of several millimeters. As a bridge to connect two piezoelectric ceramic (lead zirconate titanate, PZT) tubes, a thin-film metallic glass (TFMG) pipe is fabricated by a new technique of rotating magnetron sputtering. The vibrator combines the vibration of the axial mode of the PZT tube and the radial mode of the TFMG pipe. Theoretical analyses of the TFMG pipe and PZT tube, with a comparison of the finite element modeling, clarify the vibration characteristics so that the proper geometrical sizes, suitable boundary conditions, and driving voltage signals are designed. In the experiment, the designed vibrator was fabricated and the vibration characteristics were measured by a laser Doppler vibrometer system. The pure traveling wave propagation obtained theoretically and experimentally demonstrates the validity of this work. This study shows a new way to achieve a pure traveling wave on a short cylindrical pipe driven by PZT tubes.
DEFF Research Database (Denmark)
Rasmussen, Anders Rønne; Sørensen, Mads Peter; Gaididei, Yuri Borisovich
2011-01-01
the Hamiltonian structure, in contrast to the Kuznetsov equation, a model often used in nonlinear acoustics. An exact traveling wave front solution is derived from a generalized traveling wave assumption for the velocity potential. Numerical studies of the evolution of a number of arbitrary initial conditions...... as well as head-on colliding and confluent wave fronts exhibit several nonlinear interaction phenomena. These include wave fronts of changed velocity and amplitude along with the emergence of rarefaction waves. An analysis using the continuity of the solutions as well as the boundary conditions...
Spatial Damping of Linear Compressional Magnetoacoustic Waves ...
Indian Academy of Sciences (India)
shows greater wave damping at low values of radiative time and then attains some maximum value and then decreases. The slow mode wave has higher values of damping per wavelength, showing higher levels of damping due to radiation. For τR → ∞, the wave takes infinite time to damp and therefore travels very long ...
Energy Technology Data Exchange (ETDEWEB)
Deng, Liulin; Ibrahim, Yehia M.; Garimella, Sandilya V. B.; Webb, Ian K.; Hamid, Ahmed M.; Norheim, Randolph V.; Prost, Spencer A.; Sandoval, Jeremy A.; Baker, Erin S.; Smith, Richard D.
2016-10-18
The initial use of traveling waves (TW) for ion mobility (IM) separations using a structures for lossless ion manipulations (SLIM) employed an ion funnel trap (IFT) to accumulate ions from a continuous electrospray ionization source, and limited to injected ion populations of ~106 charges due to the onset of space charge effects in the trapping region. Additional limitations arise due to the loss of resolution for the injection of ions over longer periods (e.g. in extended pulses). In this work a new SLIM ‘flat funnel’ (FF) module has been developed and demonstrated to enable the accumulation of much larger ion populations and their injection for IM separations. Ion current measurements indicate a capacity of ~3.2×108 charges for the extended trapping volume, over an order of magnitude greater than the IFT. The orthogonal ion injection into a funnel shaped separation region can greatly reduce space charge effects during the initial IM separation stage, and the gradually reduced width of the path allows the ion packet to be increasingly compressed in the lateral dimension as the separation progresses, allowing e.g. efficient transmission through conductance limits or compatibility with subsequent ion manipulations. This work examined the TW, RF, and DC confining field SLIM parameters involved in ion accumulation, injection, transmission and separation in the FF IM module using both direct ion current and MS measurements. Wide m/z range ion transmission is demonstrated, along with significant increases in signal to noise (S/N) ratios due to the larger ion populations injected. Additionally, we observed a reduction in the chemical background, which was attributed to more efficient desolvation of solvent related clusters over the extended ion accumulation periods. The TW SLIM FF IM module is anticipated to be especially effective as a front end for long path SLIM IM separation modules.
Energy Technology Data Exchange (ETDEWEB)
Wang, Yan; Liu, Guo, E-mail: liuguo@uestc.edu.cn; Shu, Guoxiang; Yan, Ran; Wang, Li; Agurgo Balfour, E.; Fu, Hao; Luo, Yong [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China); Wang, Shafei, E-mail: rockingsandstorm@163.com [North Electronic Device Research Institution, Box 947, Beijing 100141 (China)
2016-03-15
A technique to launch a circular TE{sub 13} mode to interact with the helical electron beam of a gyrotron travelling wave amplifier is proposed and verified by simulation and cold test in this paper. The high order (HOM) TE{sub 13} mode is excited by a broadband Y-type power divider with the aid of a cylindrical waveguide system. Using grooves and convex strips loaded at the lateral planes of the output cylindrical waveguide, the electric fields of the potential competing TE{sub 32} and TE{sub 71} modes are suppressed to allow the transmission of the dominant TE{sub 13} mode. The converter performance for different structural dimensions of grooves and convex strips is studied in detail and excellent results have been achieved. Simulation predicts that the average transmission is ∼−1.8 dB with a 3 dB bandwidth of 7.2 GHz (91.5–98.7 GHz) and port reflection is less than −15 dB. The conversion efficiency to the TE{sub 32} and TE{sub 71} modes are, respectively, under −15 dB and −24 dB in the operating frequency band. Such an HOM converter operating at W-band has been fabricated and cold tested with the radiation boundary. Measurement from the vector network analyzer cold test and microwave simulations show a good reflection performance for the converter.
Directory of Open Access Journals (Sweden)
A. Vlasov
2011-11-01
Full Text Available We present a statistical study of Traveling Ionospheric Disturbances (TIDs as observed by the EISCAT Svalbard Radar (ESR during the continuous IPY-run (March 2007–February 2008 with field-aligned measurements. We have developed a semi-automatic routine for searching and extracting Atmospheric Gravity Wave (AGW activity. The collected data shows that AGW-TID signatures are common in the high-latitude ionosphere especially in the field-aligned ion velocity data (244 cases of AGW-TID signatures in daily records, but they can be observed also in electron density (26 cases, electron temperature (12 cases and ion temperature (26 cases. During the IPY campaign (in solar minimum conditions AGW-TID events appear more frequently during summer months than during the winter months. It remains still as a topic for future studies whether the observed seasonal variation is natural or caused by seasonal variation in the performance of the observational method that we use (AGW-TID signature may be more pronounced in a dense ionosphere. In our AGW-TID dataset the distribution of the oscillation periods has two peaks, one around 0.5–0.7 h and the other around 1.1–1.3 h. The diurnal occurrence rate has a deep minimum in the region of magnetic midnight, which might be partly explained by irregular auroral activity obscuring the TID signatures from our detection routines. As both the period and horizontal phase speed estimates (as derived from the classical AGW dispersion relation show values typical both for large scale TIDs and mesoscale TIDs it is difficult to distinguish whether the generator for high-latitude AGW-TIDs resides typically in the troposphere or in the near-Earth space. The results of our statistical analysis give anyway some valuable reference information for the future efforts to learn more about the dominating TID source mechanisms in polar cap conditions, and to improve AGW simulations.
Pulse wave analysis with diffusing-wave spectroscopy.
Belau, Markus; Scheffer, Wolfgang; Maret, Georg
2017-07-01
Hypertension is a major risk factor for cardiovascular disease and thus at the origin of many deaths by e.g. heart attack or stroke. Hypertension is caused by many factors including an increase in arterial stiffness which leads to changes in pulse wave velocity and wave reflections. Those often result in an increased left ventricular load which may result in heart failure as well as an increased pulsatile pressure in the microcirculation l to damage to blood vessels. In order to specifically treat the different causes of hypertension it is desirable to perform a pulse wave analysis as a complement to measurements of systolic and diastolic pressure by brachial cuff sphygmomanometry. Here we show that Diffusing Wave Spectroscopy, a novel non-invasive portable tool, is able to monitor blood flow changes with a high temporal resolution. The measured pulse travel times give detailed information of the pulse wave blood flow profile.
Westerhof, E.
2010-01-01
This lecture gives an overview of heating and current drive with electron cyclotron waves. We present the main theoretical aspects of wave propagation, wave absorption, and non-inductive current drive, as well as important technical aspects for the application of high power electron cyclotron waves,
Westerhof, E.
2012-01-01
This lecture gives an overview of heating and current drive with electron cyclotron waves. We present the main theoretical aspects of wave propagation, wave absorption, and non-inductive current drive, as well as important technical aspects for the application of high power electron cyclotron waves,
Westerhof, E.
2008-01-01
This lecture gives an overview of heating and current drive with electron cyclotron waves. We present the main theoretical aspects of wave propagation, wave absorption, and non-inductive current drive, as well as important technical aspects for the application of high power electron cyclotron waves,
Gerritsen, S.
2007-01-01
In this thesis we study wave propagation in inhomogeneous media. Examples of the classical (massless) waves we consider are acoustic waves (sound) and electromagnetic waves (light, for example). Interaction with inhomogeneities embedded in a reference medium alter the propagation direction, velocity
Post, R.F.
1963-06-11
The invention relates to a pyrotron, i.e., magnetic mirror device, designed for continuous operation in producing a high-temperature fusion reaction plasma and for directly converting the plasma energy into electrical power. The device utilizes a system in which an axially symmetric magnetic field is produced and transports plasma through a first zone of progressively rising field intensity, a second reaction zone of slowly increasing intensity, and thenceforth through a third zone of progressively decreasing intensity wherein the plasma expands against the magnetic field thereby producing electrical current in magnetic field generating solenoids associated with said third zone. (AEC)
DEFF Research Database (Denmark)
Alikhani, Amir; Frigaard, Peter; Burcharth, Hans F.
1998-01-01
The data collected over the course of the experiment must be analysed and converted into a form suitable for its intended use. Type of analyses range from simple to sophisticated. Depending on the particular experiment and the needs of the researcher. In this study three main part of irregular wave...... data analyses are presented e.g. Time Domain (Statistical) Analyses, Frequency Domain (Spectral) Analyses and Wave Reflection Analyses. Random wave profile and definitions of representative waves, distributions of individual wave height and wave periods and spectra of sea waves are presented....
Reflected-wave maser. [low noise amplifier
Clauss, R. C. (Inventor)
1976-01-01
A number of traveling-wave, slow-wave maser structures, containing active maser material but absent the typical ferrite isolators, are immersed in a nonuniform magnetic field. The microwave signal to be amplified is inserted at a circulator which directs the signal to a slow-wave structure. The signal travels through the slow-wave structure, being amplified according to the distance traveled. The end of the slow-wave structure farthest from the circulator is arranged to be a point of maximum reflection of the signal traveling through the slow-wave structure. As a consequence, the signal to be amplified traverses the slow-wave structure again, in the opposite direction (towards the circulator) experiencing amplification equivalent to that achieved by a conventional traveling-wave maser having twice the length. The circulator directs the amplified signal to following like stages of amplification. Isolators are used in between stages to prevent signals from traveling in the wrong direction, between the stages. Reduced signal loss is experienced at each stage. The high gain produced by each slow-wave structure is reduced to a moderate value by use of a nonuniform magnetic field which also broadens the line width of the maser material. The resulting bandwidth can be exceptionally wide. Cascaded stages provide high gain, exceptionally wide bandwith and very low noise temperature.
Taylor, W. W. L.
1986-01-01
Waves in space plasmas (WISP) utilizes powerful radio transmitters and sensitive receivers to probe the secrets of the magnetosphere, ionosphere and atmosphere. The scientific objective is to achieve a better understanding of the physical processes occurring in these regions. For example, audio frequency radio waves will be radiated from the long WISP antenna, will travel to the outer reaches of the magnetosphere, and will interact with Van Allen belt particles, releasing some of their energy which amplifies the waves. Study of this interaction will give a better understanding of a major magnetospheric process, wave-particle interactions. Radio waves from WISP at higher frequencies (AM radio and beyond) will be reflected by the ionosphere and will, for example, advance our understanding of bubbles in the equatorial ionosphere which affect satellite communications.
Energy Technology Data Exchange (ETDEWEB)
Muller, Norbert; Piechna, Janusz; Sun, Guangwei; Parraga, Pablo-Francisco
2018-01-02
A wave disc engine apparatus is provided. A further aspect employs a constricted nozzle in a wave rotor channel. A further aspect provides a sharp bend between an inlet and an outlet in a fluid pathway of a wave rotor, with the bend being spaced away from a peripheral edge of the wave rotor. A radial wave rotor for generating electricity in an automotive vehicle is disclosed in yet another aspect.
Energy Technology Data Exchange (ETDEWEB)
Lopez S, R. C.; Francois L, J. L. [UNAM, Facultad de Ingeniera, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico); Becker, M., E-mail: rcarlosls@yahoo.com.mx [Institut fur Neutronenphysik und Reaktortechnik (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)
2012-10-15
Problems with the computation time in a based code on the Monte Carlo method, they conduct to explore the option of the deterministic codes to be able to develop a model of robust reactor of traveling wave, and where short term results are obtained to carry out experimentation work to the moment to study an assemblies exchange scheme as method of fuel administration. KANEXT is a versatile and reliable code, developed in Germany that has satisfied our development necessities until the moment. In this article is described the KANEXT operation, and like it was implemented to develop a preliminary model of reactor core of traveling wave with operation way of stationary wave. The results obtained until the moment, as for the neutrons multiplication factor and the isotopic balance, are encouraging and they lead to refine the model removing completely the axial covering. The adoption of deterministic codes has allowed carrying out tests of complete core in a conventional computer in question of only hours; this will be valuable in the next stage of the research, where developing a re situate scheme of fuel assemblies will involve a great quantity of sprints. (Author)
Zeng, Zhi-Ping; Zhao, Yan-Gang; Xu, Wen-Tao; Yu, Zhi-Wu; Chen, Ling-Kun; Lou, Ping
2015-04-01
The frequent use of bridges in high-speed railway lines greatly increases the probability that trains are running on bridges when earthquakes occur. This paper investigates the random vibrations of a high-speed train traversing a slab track on a continuous girder bridge subjected to track irregularities and traveling seismic waves by the pseudo-excitation method (PEM). To derive the equations of motion of the train-slab track-bridge interaction system, the multibody dynamics and finite element method models are used for the train and the track and bridge, respectively. By assuming track irregularities to be fully coherent random excitations with time lags between different wheels and seismic accelerations to be uniformly modulated, non-stationary random excitations with time lags between different foundations, the random load vectors of the equations of motion are transformed into a series of deterministic pseudo-excitations based on PEM and the wheel-rail contact relationship. A computer code is developed to obtain the time-dependent random responses of the entire system. As a case study, the random vibration characteristics of an ICE-3 high-speed train traversing a seven-span continuous girder bridge simultaneously excited by track irregularities and traveling seismic waves are analyzed. The influence of train speed and seismic wave propagation velocity on the random vibration characteristics of the bridge and train are discussed.
Transversally periodic solitary gravity–capillary waves
Milewski, Paul A.; Wang, Zhan
2014-01-01
When both gravity and surface tension effects are present, surface solitary water waves are known to exist in both two- and three-dimensional infinitely deep fluids. We describe here solutions bridging these two cases: travelling waves which are localized in the propagation direction and periodic in the transverse direction. These transversally periodic gravity–capillary solitary waves are found to be of either elevation or depression type, tend to plane waves below a critical transverse period and tend to solitary lumps as the transverse period tends to infinity. The waves are found numerically in a Hamiltonian system for water waves simplified by a cubic truncation of the Dirichlet-to-Neumann operator. This approximation has been proved to be very accurate for both two- and three-dimensional computations of fully localized gravity–capillary solitary waves. The stability properties of these waves are then investigated via the time evolution of perturbed wave profiles. PMID:24399922
Robust Wave Resource Estimation
DEFF Research Database (Denmark)
Lavelle, John; Kofoed, Jens Peter
2013-01-01
An assessment of the wave energy resource at the location of the Danish Wave Energy test Centre (DanWEC) is presented in this paper. The Wave Energy Converter (WEC) test centre is located at Hanstholm in the of North West Denmark. Information about the long term wave statistics of the resource...... is necessary for WEC developers, both to optimise the WEC for the site, and to estimate its average yearly power production using a power matrix. The wave height and wave period sea states parameters are commonly characterized with a bivariate histogram. This paper presents bivariate histograms and kernel...... density estimates of the PDF as a function both of Hm0 and Tp, and Hm0 and T0;2, together with the mean wave power per unit crest length, Pw, as a function of Hm0 and T0;2. The wave elevation parameters, from which the wave parameters are calculated, are filtered to correct or remove spurious data...
Segregation of helicity in inertial wave packets
Ranjan, A.
2017-03-01
Inertial waves are known to exist in the Earth's rapidly rotating outer core and could be important for the dynamo generation. It is well known that a monochromatic inertial plane wave traveling parallel to the rotation axis (along positive z ) has negative helicity while the wave traveling antiparallel (negative z ) has positive helicity. Such a helicity segregation, north and south of the equator, is necessary for the α2-dynamo model based on inertial waves [Davidson, Geophys. J. Int. 198, 1832 (2014), 10.1093/gji/ggu220] to work. The core is likely to contain a myriad of inertial waves of different wave numbers and frequencies. In this study, we investigate whether this characteristic of helicity segregation also holds for an inertial wave packet comprising waves with the same sign of Cg ,z, the z component of group velocity. We first derive the polarization relations for inertial waves and subsequently derive the resultant helicity in wave packets forming as a result of superposition of two or more waves. We find that the helicity segregation does hold for an inertial wave packet unless the wave numbers of the constituent waves are widely separated. In the latter case, regions of opposite color helicity do appear, but the mean helicity retains the expected sign. An illustration of this observation is provided by (a) calculating the resultant helicity for a wave packet formed by superposition of four upward-propagating inertial waves with different wave vectors and (b) conducting the direct numerical simulation of a Gaussian eddy under rapid rotation. Last, the possible effects of other forces such as the viscous dissipation, the Lorentz force, buoyancy stratification, and nonlinearity on helicity are investigated and discussed. The helical structure of the wave packet is likely to remain unaffected by dissipation or the magnetic field, but can be modified by the presence of linearly stable stratification and nonlinearity.
Directory of Open Access Journals (Sweden)
Yun-Li Chen
2007-01-01
Full Text Available Utilizing Ground Penetrating Radar (GPR, emitted electromagnetic (EM standing waves can be generated in underground voids. This phenomenon can be employed for the detection of subterranean voids and fractures when one has a proper understanding of relation between the widest inner length in an underground vacant space and half an EM wavelength. In this study, indoor and outdoor small-scale experiments verified the generation of EM standing waves. These responses were then applied in an arched-top cave covered by a single layer of backfill at Gongzihliao, Taiwan. Further studies were carried out at two other sites, including a fracture located in a granite mountain without regolith on the surface at Kinmen, and a deteriorating fishing port in Nanfangao, northeast Taiwan. Applying a band-pass filter with bandwidth narrower than a typical two-octave bandwidth produced the required standing waves with recognizable positions of minimum amplitude. A hyperbolic travel-time (HTT curve revealing the minimum amplitude, known as standing-wave nodes, indicates the presence of an underground hollow diffractor with the widest inner length in the vacant space being larger than half an EM wavelength. However, a HTT curve without nodal points signifies a hollow object with the widest inner length smaller than half an EM wavelength or an underground solid diffractor. An underground arched-top cave was detected by nodal points in the arc-like curves. When emitting the radar waves toward a wall, the interval of the nodes was used for estimating the wavelength of receiving GPR signals. Identifying the occurrence of nodal points in HTT or HTTlike curves in radargrams may assist the GPR interpreting work for underground tunnels, drainages, cavities, fractures, or solid objects.
Yamaguchi, Yoshiyuki Y
2011-07-01
Traveling clusters are ubiquitously observed in the Hamiltonian mean-field model for a wide class of initial states, which are not predicted to become spatially inhomogeneous states by nonequilibrium statistical mechanics and by nonlinear Landau damping. To predict such a cluster state from a given initial state, we combine nonequilibrium statistical mechanics and a construction method of Bernstein-Greene-Kruskal (BGK) waves with the aid of phenomenological assumptions. The phenomenological theory is partially successful, and the theoretically constructed cluster states are in good agreement with N-body simulations. Robustness of the theory is also discussed for unsuccessful initial states.
Ma, Yingjun; Wu, Li; Wu, Hehui; Chen, Weimin; Wang, Yanli; Gu, Shijie
2008-11-10
We present a single longitudinal mode, diode pumped Nd:YVO(4) microchip laser where a pair of quarter-wave plates (QWPs) sandwich Nd:YVO(4) and the principle axes of QWPs are oriented at 45 degrees to the c-axis of Nd:YVO(4). Three pieces of crystals were optically bonded together as a microchip without adhesive. Owing to large birefringence of Nd:YVO(4), two standing waves with orthogonal polarizations compensate their hole-burning effects with each other, which diminish total spatial hole-burning effects in Nd:YVO(4). The maximum pump power of greater than 25 times the threshold for single longitudinal mode operation has been theoretically shown and experimentally demonstrated. The power of output, slope efficiencies and temperature range of single longitudinal mode operation are greater than 730 mw (at 1.25 W pump), 60% and 30 degrees C, respectively.
2006-01-01
Internal waves are waves that travel within the interior of a fluid. The waves propagate at the interface or boundary between two layers with sharp density differences, such as temperature. They occur wherever strong tides or currents and stratification occur in the neighborhood of irregular topography. They can propagate for several hundred kilometers. The ASTER false-color VNIR image off the island of Tsushima in the Korea Strait shows the signatures of several internal wave packets, indicating a northern propagation direction. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), ASTER images Earth to map and monitor the changing surface of our planet. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. The broad spectral coverage and high spectral resolution of ASTER provides scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring surface heat balance. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate. Size: 60 by 120 kilometers (37.2 by 74.4 miles) Location: 34.6 degrees North latitude, 129.5 degrees East longitude Orientation: North at top Image Data: ASTER bands 3, 2, and 1 Original Data Resolution: 90
Wiley, Scott
2008-01-01
This viewgraph document reviews some mountain wave turbulence and operational hazards while soaring. Maps, photographs, and satellite images of the meteorological phenomena are included. Additionally, photographs of aircraft that sustained mountain wave damage are provided.
Nijhof, M.J.J.
2010-01-01
In this work, the accuracy, efficiency and range of applicability of various (approximate) models for viscothermal wave propagation are investigated. Models for viscothermal wave propagation describe thewave behavior of fluids including viscous and thermal effects. Cases where viscothermal effects
... this page: //medlineplus.gov/ency/article/002693.htm Cold wave lotion poisoning To use the sharing features on this page, please enable JavaScript. Cold wave lotion is a hair care product used ...
Electromagnetic ultrasonic guided waves
Huang, Songling; Li, Weibin; Wang, Qing
2016-01-01
This book introduces the fundamental theory of electromagnetic ultrasonic guided waves, together with its applications. It includes the dispersion characteristics and matching theory of guided waves; the mechanism of production and theoretical model of electromagnetic ultrasonic guided waves; the effect mechanism between guided waves and defects; the simulation method for the entire process of electromagnetic ultrasonic guided wave propagation; electromagnetic ultrasonic thickness measurement; pipeline axial guided wave defect detection; and electromagnetic ultrasonic guided wave detection of gas pipeline cracks. This theory and findings on applications draw on the author’s intensive research over the past eight years. The book can be used for nondestructive testing technology and as an engineering reference work. The specific implementation of the electromagnetic ultrasonic guided wave system presented here will also be of value for other nondestructive test developers.
Coronal Waves and Oscillations
Directory of Open Access Journals (Sweden)
Nakariakov Valery M.
2005-07-01
Full Text Available Wave and oscillatory activity of the solar corona is confidently observed with modern imaging and spectral instruments in the visible light, EUV, X-ray and radio bands, and interpreted in terms of magnetohydrodynamic (MHD wave theory. The review reflects the current trends in the observational study of coronal waves and oscillations (standing kink, sausage and longitudinal modes, propagating slow waves and fast wave trains, the search for torsional waves, theoretical modelling of interaction of MHD waves with plasma structures, and implementation of the theoretical results for the mode identification. Also the use of MHD waves for remote diagnostics of coronal plasma - MHD coronal seismology - is discussed and the applicability of this method for the estimation of coronal magnetic field, transport coefficients, fine structuring and heating function is demonstrated.
Energy Technology Data Exchange (ETDEWEB)
Menikoff, Ralph [Los Alamos National Laboratory
2015-12-14
The Zel’dovich-von Neumann-Doering (ZND) profile of a detonation wave is derived. Two basic assumptions are required: i. An equation of state (EOS) for a partly burned explosive; P(V, e, λ). ii. A burn rate for the reaction progress variable; d/dt λ = R(V, e, λ). For a steady planar detonation wave the reactive flow PDEs can be reduced to ODEs. The detonation wave profile can be determined from an ODE plus algebraic equations for points on the partly burned detonation loci with a specified wave speed. Furthermore, for the CJ detonation speed the end of the reaction zone is sonic. A solution to the reactive flow equations can be constructed with a rarefaction wave following the detonation wave profile. This corresponds to an underdriven detonation wave, and the rarefaction is know as a Taylor wave.
A multimodal wave spectrum-based approach for statistical downscaling of local wave climate
Hegermiller, Christie; Antolinez, Jose A A; Rueda, Ana C; Camus, Paula; Perez, Jorge; Erikson, Li; Barnard, Patrick; Mendez, Fernando J.
2017-01-01
Characterization of wave climate by bulk wave parameters is insufficient for many coastal studies, including those focused on assessing coastal hazards and long-term wave climate influences on coastal evolution. This issue is particularly relevant for studies using statistical downscaling of atmospheric fields to local wave conditions, which are often multimodal in large ocean basins (e.g. the Pacific). Swell may be generated in vastly different wave generation regions, yielding complex wave spectra that are inadequately represented by a single set of bulk wave parameters. Furthermore, the relationship between atmospheric systems and local wave conditions is complicated by variations in arrival time of wave groups from different parts of the basin. Here, we address these two challenges by improving upon the spatiotemporal definition of the atmospheric predictor used in statistical downscaling of local wave climate. The improved methodology separates the local wave spectrum into “wave families,” defined by spectral peaks and discrete generation regions, and relates atmospheric conditions in distant regions of the ocean basin to local wave conditions by incorporating travel times computed from effective energy flux across the ocean basin. When applied to locations with multimodal wave spectra, including Southern California and Trujillo, Peru, the new methodology improves the ability of the statistical model to project significant wave height, peak period, and direction for each wave family, retaining more information from the full wave spectrum. This work is the base of statistical downscaling by weather types, which has recently been applied to coastal flooding and morphodynamic applications.
Sterlini-Van der Meer, Fenneke
2009-01-01
The sea floor of shallow seas is rarely flat and often dynamic. A widely occurring bedform type is the sand wave. Sand waves form more or less regular wavelike patterns on the seabed with crests up to one third of the water depth, wave lengths of hundreds of metres and a migration rate of metres up
DEFF Research Database (Denmark)
Kofoed, Jens Peter; Frigaard, Peter
Wave Dragon is a wave energy converter of the overtopping type. The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the experience gained a full scale, multi MW prototype...
DEFF Research Database (Denmark)
Burcharth, H. F.; Larsen, Brian Juul
The investigation concerns the design of a new internal breakwater in the main port of Ibiza. The objective of the model tests was in the first hand to optimize the cross section to make the wave reflection low enough to ensure that unacceptable wave agitation will not occur in the port. Secondly...... wave overtopping was studied as well....
Modeling Regional Seismic Waves
1991-03-25
Shear waves are almost always observed from underground explosions. One can visualize many ways to convert explosion P waves into SV waves. An ob- vious...of the observed moment to the input source moment, Moba /Mo, as a function of the compressional velocities a, of the embedded sphere for different whole
Fundamentals of wave phenomena
Hirose, Akira
2010-01-01
This textbook provides a unified treatment of waves that either occur naturally or can be excited and propagated in various media. This includes both longitudinal and transverse waves. The book covers both mechanical and electrical waves, which are normally covered separately due to their differences in physical phenomena.
Directory of Open Access Journals (Sweden)
Andreas Spiegelberg
2016-12-01
With the still unmet need for a clinically acceptable method for acquiring intracranial compliance, and the revival of ICP waveform analysis, B-waves are moving back into the research focus. Herein we provide a concise review of the literature on B-waves, including a critical assessment of non-invasive methods for obtaining B-wave surrogates.
Indian Academy of Sciences (India)
We present a broad overview of the emerging field of gravitational-wave astronomy. Although gravitational waves have not been directly de- tected yet, the worldwide scientific community is engaged in an exciting search for these elusive waves. Once detected, they will open up a new observational window to the Universe.
Chevalier, C. T.; Herrmann, K. A.; Kory, C. L.; Wilson, J. D.; Cross, A. W.; Williams, W. D. (Technical Monitor)
2001-01-01
Previously, it was shown that MAFIA (solutions of Maxwell's equations by the Finite Integration Algorithm), a three-dimensional simulation code, can be used to produce accurate cold-test characteristics including frequency-phase dispersion, interaction impedance, and attenuation for traveling-wave tube (TWT) slow-wave structures. In an effort to improve user-friendliness and simulation time, a model was developed to compute the cold-test parameters using the electromagnetic field simulation software package CST MICROWAVE STUDIO (MWS). Cold-test parameters were calculated for several slow-wave circuits including a ferruled coupled-cavity, a folded waveguide, and a novel finned-ladder circuit using both MWS and MAFIA. Comparisons indicate that MWS provides more accurate cold-test data with significantly reduced simulation times. Both MAFIA and MWS are based on the finite integration (FI) method; however, MWS has several advantages over MAFIA. First, it has a Windows based interface for PC operation, making it very user-friendly, whereas MAFIA is UNIX based. MWS uses a new Perfect Boundary Approximation (PBA), which increases the accuracy of the simulations by avoiding stair step approximations associated with MAFIA's representation of structures. Finally, MWS includes a Visual Basic for Applications (VBA) compatible macro language that enables the simulation process to be automated and allows for the optimization of user-defined goal functions, such as interaction impedance.
Spin wave generation by surface acoustic waves
Li, Xu; Labanowski, Dominic; Salahuddin, Sayeef; Lynch, Christopher S.
2017-07-01
Surface acoustic waves (SAW) on piezoelectric substrates can excite spin wave resonance (SWR) in magnetostrictive films through magnetoelastic coupling. This acoustically driven SWR enables the excitation of a single spin wave mode with an in-plane wave vector k matched to the magnetoelastic wave vector. A 2D frequency domain finite element model is presented that fully couples elastodynamics, micromagnetics, and piezoelectricity with interface spin pumping effects taken into account. It is used to simulate SAW driven SWR on a ferromagnetic and piezoelectric heterostructure device with an interdigital transducer configuration. These results, for the first time, present the spatial distribution of magnetization components that, together with elastic wave, exponentially decays along the propagation direction due to magnetic damping. The results also show that the system transmission rate S21(dB) can be tuned by both an external bias field and the SAW wavevector. Acoustic spin pumping at magnetic film/normal metal interface leads to damping enhancement in magnetic films that decreases the energy absorption rate from elastic energy. This weakened interaction between the magnetic energy and elastic energy leads to a lower evanescence rate of the SAW that results in a longer distance propagation. With strong magnetoelastic coupling, the SAW driven spin wave is able to propagate up to 1200 μm. The results give a quantitative indication of the acoustic spin pumping contribution to linewidth broadening.
Energy Technology Data Exchange (ETDEWEB)
Deng, Liulin; Ibrahim, Yehia M.; Hamid, Ahmed M.; Garimella, Sandilya V. B.; Webb, Ian K.; Zheng, Xueyun; Prost, Spencer A.; Sandoval, Jeremy A.; Norheim, Randolph V.; Anderson, Gordon A.; Tolmachev, Aleksey V.; Baker, Erin S.; Smith, Richard D.
2016-09-20
We report the development and initial evaluation of a 13-m path length Structures for Lossless Manipulations (SLIM) module for achieving high resolution separations using traveling waves (TW) with ion mobility (IM) spectrometry. The TW SLIM module was fabricated using two mirror-image printed circuit boards with appropriately configured RF, DC and TW electrodes and positioned with a 2.75-mm inter-surface gap. Ions were effective confined between the surfaces by RF-generated pseudopotential fields and moved losslessly through a serpentine path including 44 “U” turns using TWs. The ion mobility resolution was characterized at different pressures, gaps between the SLIM surfaces, TW and RF parameters. After initial optimization the SLIM IM-MS module provided about 5-fold higher resolution separations than present commercially available drift tube or traveling wave IM-MS platforms. Peak capacity and peak generation rates achieved were 246 and 370 s-1, respectively, at a TW speed of 148 m/s. The high resolution achieved in the TW SLIM IM-MS enabled e.g., isomeric sugars (Lacto-N-fucopentaose I and Lacto-N-fucopentaose II) to be baseline resolved, and peptides from a albumin tryptic digest much better resolved than with existing commercial IM-MS platforms. The present work also provides a foundation for the development of much higher resolution SLIM devices based upon both considerably longer path lengths and multi-pass designs.
Deng, Liulin; Ibrahim, Yehia M; Hamid, Ahmed M; Garimella, Sandilya V B; Webb, Ian K; Zheng, Xueyun; Prost, Spencer A; Sandoval, Jeremy A; Norheim, Randolph V; Anderson, Gordon A; Tolmachev, Aleksey V; Baker, Erin S; Smith, Richard D
2016-09-20
We report the development and initial evaluation of a 13 m path length Structures for Lossless Manipulations (SLIM) module for achieving high resolution separations using traveling waves (TW) with ion mobility (IM) spectrometry. The TW SLIM module was fabricated using two mirror-image printed circuit boards with appropriately configured RF, DC, and TW electrodes and positioned with a 2.75 mm intersurface gap. Ions were effectively confined in field-generated conduits between the surfaces by RF-generated pseudopotential fields and moved losslessly through a serpentine path including 44 "U" turns using TWs. The ion mobility resolution was characterized at different pressures, gaps between the SLIM surfaces, and TW and RF parameters. After initial optimization, the SLIM IM-MS module provided about 5-fold higher resolution separations than present commercially available drift tube or traveling wave IM-MS platforms. Peak capacity and peak generation rates achieved were 246 and 370 s(-1), respectively, at a TW speed of 148 m/s. The high resolution achieved in the TW SLIM IM-MS enabled, e.g., isomeric sugars (lacto-N-fucopentaose I and lacto-N-fucopentaose II) to be baseline resolved, and peptides from an albumin tryptic digest were much better resolved than with existing commercial IM-MS platforms. The present work also provides a foundation for the development of much higher resolution SLIM devices based upon both considerably longer path lengths and multipass designs.
Wave turbulence in annular wave tank
Onorato, Miguel; Stramignoni, Ettore
2014-05-01
We perform experiments in an annular wind wave tank at the Dipartimento di Fisica, Universita' di Torino. The external diameter of the tank is 5 meters while the internal one is 1 meter. The tank is equipped by two air fans which can lead to a wind of maximum 5 m/s. The present set up is capable of studying the generation of waves and the development of wind wave spectra for large duration. We have performed different tests including different wind speeds. For large wind speed we observe the formation of spectra consistent with Kolmogorv-Zakharov predictions.
Lu, X.; Chen, C.; Chu, X.; Nguyen, V.; Smith, A. K.
2016-12-01
In the polar winter stratosphere, a group of eastward propagating planetary waves (relative to ground) are generated by the instability of the polar vortex and dominate the variability of chemistry and dynamics of the atmosphere. The strong polar vortex consisting of strong eastward winds support the propagation of these planetary waves until they reach the critical filtering level in the upper stratosphere. However, lidar measurements at McMurdo (78S), Antarctica illustrate the significant signatures of the planetary waves up to 110 km, making it intriguring to identify the wave source. The SD-WACCM well reproduces both local and global structure of these planeaty waves as compared with the ground-based lidar and satellite (MLS), which is thus used to derive the EP flux induced by these planetary waves. In addition to a region of positive EP flux divergence in the stratosphere where we expect to have the stratospheric planetary waves generated, a localized EP flux divergence is also found in the mesosphere and lower thermosphere (MLT) at high latitudes, which likely triggers the generation the waves locally or amplifies those waves that survive from the critical level filtering. By incorporating the background winds from SD-WACCM, a stand-alone mechanistic model with gravity wave effect parameterized is applied to investigate the relative importance of the vertical propagation and in-situ instability to the generation of the planetary waves in the mesosphere and lower thermosphere and whether and how there two processes are coupled together. The gravity wave effect on planetary waves is also addressed. This study provides insights on the vertical wave coupling via wave-wave and wave-mean interactions in the polar winter region.
Relationship between stress wave velocities of green and dry veneer
Brian K. Brashaw; Xiping Wang; Robert J. Ross; Roy F. Pellerin
2004-01-01
This paper evaluates the relationship between the stress wave velocities of green and dry southern pine and Douglas-fir veneers. A commercial stress wave timer and a laboratory signal analysis system were used to measure the transit time required for an induced stress wave to travel the longitudinal length of each veneer. Stress wave transit times were measured in the...
Chernyi, G. G.
Theoretical and experimental research related to the generation and propagation of exothermic waves in combustible gas mixtures as well as solid and liquid combustible media is reviewed. In particular, attention is given to detonation phenomena, the stationary structure of chemical detonation waves for various gas and condensed explosive models, discontinuous solutions for motions with exothermic discontinuities, and heat release in thermonuclear reactions. The discussion also covers frontal polymerization and crystallization waves, stationary combustion waves in systems with high-temperature self-propagating synthesis, and initiation of exothermic waves in continua with allowance for transfer processes.
DEFF Research Database (Denmark)
Sørensen, H. C.; Hansen, R.; Friis-Madsen, E.
2000-01-01
The Wave Dragon is an offshore wave energy converter of the overtopping type, utilizing a patented wave reflector design to focus the waves towards a ramp, and the overtopping is used for electricity production through a set of Kaplan/propeller hydro turbines. During the last 2 years, excessive...... design an testing has been performed on a scale 1:50 model of the Wave Dragon, and on a scale 1:3:5 model turbine. Thus survivability, overtopping, hydraulic response, turbine performance and feasibility have been verified....
DEFF Research Database (Denmark)
Frigaard, Peter; Kofoed, Jens Peter; Tedd, James William
2006-01-01
The Wave Dragon is a 4 to 11 MW offshore wave energy converter of the overtopping type. It basically consists of two wave reflectors focusing the waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power......'s first offshore wave energy converter. During this period an extensive measuring program has established the background for optimal design of the structure and regulation of the power take off system. Planning for full scale deployment of a 7 MW unit within the next 2 years is in progress. The prototype...
Pulsars and Gravitational Waves
Lee, K. J.; Xu, R. X.; Qiao, G. J.
2010-04-01
The relationship between pulsar-like compact stars and gravitational waves is briefly reviewed. Due to regular spins, pulsars could be useful tools for us to detect ~nano-Hz low-frequency gravitational waves by pulsar-timing array technique; besides, they would also be ~kilo-Hz high-frequency gravitational wave radiators because of their compactness. The wave strain of an isolated pulsar depends on the equation state of cold matter at supra-nuclear densities. Therefore, a real detection of gravitational wave should be very meaningful in gravity physics, micro-theory of elementary strong interaction, and astronomy.
Elmore, William C
1985-01-01
Because of the increasing demands and complexity of undergraduate physics courses (atomic, quantum, solid state, nuclear, etc.), it is often impossible to devote separate courses to the classic wave phenomena of optics, acoustics, and electromagnetic radiation. This brief comprehensive text helps alleviate the problem with a unique overview of classical wave theory in one volume.By examining a sequence of concrete and specific examples (emphasizing the physics of wave motion), the authors unify the study of waves, developing abstract and general features common to all wave motion. The fundam
Engelbrecht, Jüri
2015-01-01
This book addresses the modelling of mechanical waves by asking the right questions about them and trying to find suitable answers. The questions follow the analytical sequence from elementary understandings to complicated cases, following a step-by-step path towards increased knowledge. The focus is on waves in elastic solids, although some examples also concern non-conservative cases for the sake of completeness. Special attention is paid to the understanding of the influence of microstructure, nonlinearity and internal variables in continua. With the help of many mathematical models for describing waves, physical phenomena concerning wave dispersion, nonlinear effects, emergence of solitary waves, scales and hierarchies of waves as well as the governing physical parameters are analysed. Also, the energy balance in waves and non-conservative models with energy influx are discussed. Finally, all answers are interwoven into the canvas of complexity.
4-wave dynamics in kinetic wave turbulence
Chibbaro, Sergio; Rondoni, Lamberto
2016-01-01
A general Hamiltonian wave system with quartic resonances is considered, in the standard kinetic limit of a continuum of weakly interacting dispersive waves with random phases. The evolution equation for the multimode characteristic function $Z$ is obtained within an "interaction representation" and a perturbation expansion in the small nonlinearity parameter. A frequency renormalization is performed to remove linear terms that do not appear in the 3-wave case. Feynman-Wyld diagrams are used to average over phases, leading to a first order differential evolution equation for $Z$. A hierarchy of equations, analogous to the Boltzmann hierarchy for low density gases is derived, which preserves in time the property of random phases and amplitudes. This amounts to a general formalism for both the $N$-mode and the 1-mode PDF equations for 4-wave turbulent systems, suitable for numerical simulations and for investigating intermittency.
Wave Overtopping Characteristics of the Wave Dragon
DEFF Research Database (Denmark)
Tedd, James; Kofoed, Jens Peter
Simulation work has been used extensively with the Wave dragon and other overtopping devices to analyse the power production performance of them and to optimise the structural design and the control strategy. A time domain approach to this is well documented in Jakobsen & Frigaard 1999. Using...... measurements taken from the Wave Dragon Nissum Bredning prototype, some of the previous assumptions have been slightly modified and improved upon, so that the simulation method better represents the reality of what is occurring....
Energy Technology Data Exchange (ETDEWEB)
Santos, Allan Xavier dos
2010-07-01
During the operation of a nuclear plant and other industrial plants, the operational time and the exposition to severe working conditions may cause the wear of its components, consequently, compromising the safety and the performance of the installation. The implementation of periodical inspections helps to ensure the safe operation and the best performance of the plant. In this way, the use of ultrasonic techniques for inspection and materials characterization becomes more and more attractive, since they offer quick, precise results and are technically ease to implement. The usual ultrasonic techniques, need to the measure the travelling time of the ultrasonic wave in the material examined in order to extract information useful to characterize it. Thus, the measurement of the travelling time of the ultrasonic wave is the overriding factor in most of the applications made with ultrasound. In this work a new technique was developed for measuring the travelling time of the ultrasonic wave using a Fourier's Fast Transformer (FFT). It will be shown mathematically and experimentally that it is possible to use the ultrasonic signal in the frequency domain to determine the travelling time of the ultrasonic wave. Five experiments were carried out for the experimental validation of this new technique. The materials used were 20 ceramic pastilles with different porosities and 3 aluminum plates of different thicknesses. The obtained results have shown that the new technique proposed in this work was able to determine the travelling time of the ultrasonic wave with the same precision as the conventional technique. It was shown, furthermore, that this new technique is able to measure the travelling time of the ultrasonic wave in situations where the conventional technique cannot be applied greatly expanding the range of application of ultrasonic testing and inspections. (author)
Cycloidal Wave Energy Converter
Energy Technology Data Exchange (ETDEWEB)
Stefan G. Siegel, Ph.D.
2012-11-30
This program allowed further advancing the development of a novel type of wave energy converter, a Cycloidal Wave Energy Converter or CycWEC. A CycWEC consists of one or more hydrofoils rotating around a central shaft, and operates fully submerged beneath the water surface. It operates under feedback control sensing the incoming waves, and converts wave power to shaft power directly without any intermediate power take off system. Previous research consisting of numerical simulations and two dimensional small 1:300 scale wave flume experiments had indicated wave cancellation efficiencies beyond 95%. The present work was centered on construction and testing of a 1:10 scale model and conducting two testing campaigns in a three dimensional wave basin. These experiments allowed for the first time for direct measurement of electrical power generated as well as the interaction of the CycWEC in a three dimensional environment. The Atargis team successfully conducted two testing campaigns at the Texas A&M Offshore Technology Research Center and was able to demonstrate electricity generation. In addition, three dimensional wave diffraction results show the ability to achieve wave focusing, thus increasing the amount of wave power that can be extracted beyond what was expected from earlier two dimensional investigations. Numerical results showed wave cancellation efficiencies for irregular waves to be on par with results for regular waves over a wide range of wave lengths. Using the results from previous simulations and experiments a full scale prototype was designed and its performance in a North Atlantic wave climate of average 30kW/m of wave crest was estimated. A full scale WEC with a blade span of 150m will deliver a design power of 5MW at an estimated levelized cost of energy (LCOE) in the range of 10-17 US cents per kWh. Based on the new results achieved in the 1:10 scale experiments these estimates appear conservative and the likely performance at full scale will
Vu, Ngoc; Brown, Jeffery; Giles, Kevin; Zhang, Qibin
2017-09-15
The position of C=C within fatty acyl chains affects the biological function of lipids. Ozone-induced dissociation mass spectrometry (OzID-MS) has great potential in determination of lipid double-bond position, but has generally been implemented on low-resolution ion trap mass spectrometers. In addition, most of the OzID-MS experiments carried out so far were focused on the sodiated adducts of lipids; fragmentation of the most commonly observed protonated ions generated in LC/MS-based lipidomics workflow has been less explored. Ozone generated in line from an ozone generator was connected to the trap and transfer gas supply line of a Synapt G2 high-resolution mass spectrometer. Protonated ions of different phosphatidylcholines (PC) were generated by electrospray ionization through direct infusion. Different parameters, including traveling wave height and velocity, trap entrance and DC potential, were adjusted to maximize the OzID efficiency. sn-positional isomers and cis/trans isomers of lipids were compared for their reactivity with ozone. Traveling wave height and velocity were tuned to prolong the encounter time between lipid ions and ozone, and resulted in improved OzID efficiency, as did increasing trapping region DC and entrance potential. Under optimized settings, at least 1000 times enhancement in OzID efficiency was achieved compared to that under default settings for monounsaturated PC standards. Monounsaturated C=C in the sn-2 PC isomer reacted faster with ozone than the sn-1 isomer. Similarly, the C=C in trans PC reacted faster than in cis PC. This is the first implementation of OzID in the trap and transfer region of a traveling wave enabled high-resolution mass spectrometer. The OzID reaction efficiency is significantly improved by slowing down ions in the trap region for their prolonged interaction with ozone. This will facilitate application of high-resolution OzID-MS in lipidomics. Copyright © 2017 John Wiley & Sons, Ltd.
Exact solitary wave and quasi-periodic wave solutions of the KdV-Sawada-Kotera-Ramani equation
National Research Council Canada - National Science Library
Zhang, Lijun; Khalique, Chaudry Masood
2015-01-01
In this paper we derive new exact solitary wave solutions and quasi-periodic traveling wave solutions of the KdV-Sawada-Kotera-Ramani equation by using a method which we introduce here for the first time...
CERN. Geneva
2016-01-01
In the past year, the LIGO-Virgo Collaboration announced the first secure detection of gravitational waves. This discovery heralds the beginning of gravitational wave astronomy: the use of gravitational waves as a tool for studying the dense and dynamical universe. In this talk, I will describe the full spectrum of gravitational waves, from Hubble-scale modes, through waves with periods of years, hours and milliseconds. I will describe the different techniques one uses to measure the waves in these bands, current and planned facilities for implementing these techniques, and the broad range of sources which produce the radiation. I will discuss what we might expect to learn as more events and sources are measured, and as this field matures into a standard part of the astronomical milieu.
DEFF Research Database (Denmark)
Frigaard, Peter; Andersen, Thomas Lykke
The present book describes the most important aspects of wave analysis techniques applied to physical model tests. Moreover, the book serves as technical documentation for the wave analysis software WaveLab 3, cf. Aalborg University (2012). In that respect it should be mentioned that supplementary...... to the present technical documentation exists also the online help document describing the WaveLab software in detail including all the inputs and output fields. In addition to the two main authors also Tue Hald, Jacob Helm-Petersen and Morten Møller Jakobsen have contributed to the note. Their input is highly...... acknowledged. The outline of the book is as follows: • Chapter 2 and 3 describes analysis of waves in time and frequency domain. • Chapter 4 and 5 describes the separation of incident and reflected waves for the two-dimensional case. • Chapter 6 describes the estimation of the directional spectra which also...
Ockendon, Hilary
2016-01-01
Now in its second edition, this book continues to give readers a broad mathematical basis for modelling and understanding the wide range of wave phenomena encountered in modern applications. New and expanded material includes topics such as elastoplastic waves and waves in plasmas, as well as new exercises. Comprehensive collections of models are used to illustrate the underpinning mathematical methodologies, which include the basic ideas of the relevant partial differential equations, characteristics, ray theory, asymptotic analysis, dispersion, shock waves, and weak solutions. Although the main focus is on compressible fluid flow, the authors show how intimately gasdynamic waves are related to wave phenomena in many other areas of physical science. Special emphasis is placed on the development of physical intuition to supplement and reinforce analytical thinking. Each chapter includes a complete set of carefully prepared exercises, making this a suitable textbook for students in applied mathematics, ...
Digital Repository Service at National Institute of Oceanography (India)
Varkey, M.J.
of component waves of various periods and heights. This is the most commonly used theory for practical applications like design of ships, oil rigs and coastal structures such as jetties, ports, and sea walls. This theory also provides sufficient intellectual... of wind waves in the sea is a wide and interesting field with ap- plications in marine exploration ac- tivities, underwater pipe laying, pol- lution control, ports and shipping in- volving billions of dollars worth of transactions. Not all sea waves look...
Flammer, Carson
2005-01-01
Intended to facilitate the use and calculation of spheroidal wave functions, this applications-oriented text features a detailed and unified account of the properties of these functions. Addressed to applied mathematicians, mathematical physicists, and mathematical engineers, it presents tables that provide a convenient means for handling wave problems in spheroidal coordinates.Topics include separation of the scalar wave equation in spheroidal coordinates, angle and radial functions, integral representations and relations, and expansions in spherical Bessel function products. Additional subje
DEFF Research Database (Denmark)
Takayama, Osamu; Crasovan, Lucian Cornel; Johansen, Steffen Kjær
2008-01-01
The interface of two semi-infinite media, where at least one of them is a birefringent crystal, supports a special type of surface wave that was predicted theoretically by D'yakonov in 1988. Since then, the properties of such waves, which exist in transparent media only under very special......, the existence of these surface waves in specific material examples is analyzed, discussing the challenge posed by their experimental observation....
2015-10-30
Coastal Inlets Research Program WaveNet WaveNet is a web-based, Graphical-User-Interface ( GUI ) data management tool developed for Corps coastal...generates tabular and graphical information for project planning and design documents. The WaveNet is a web-based GUI designed to provide users with a...data from different sources, and employs a combination of Fortran, Python and Matlab codes to process and analyze data for USACE applications
CERN. Geneva HR-RFA
2006-01-01
We will present a brief introduction to the physics of gravitational waves and their properties. We will review potential astrophysical sources of gravitational waves, and the physics and astrophysics that can be learned from their study. We will survey the techniques and technologies for detecting gravitational waves for the first time, including bar detectors and broadband interferometers, and give a brief status report on the international search effort.
CERN. Geneva
2006-01-01
Gravitational wave astronomy is expected to become an observational field within the next decade. First direct detection of gravitational waves is possible with existing terrestrial-based detectors, and highly probable with proposed upgrades. In this three-part lecture series, we give an overview of the field, including material on gravitional wave sources, detection methods, some details of interferometric detectors, data analysis methods, and current results from observational data-taking runs of the LIGO and GEO projects.
Hanna, James P.
1994-06-01
The Waveform and Vector Exchange Specification (WAVES) is the Industry standard representation for digital stimulus and response for both the design and test communities. The VHSIC Hardware Description Language (VHDL) is the Industry standard language for the design, modeling, and simulation of digital electronics. Together VHDL and WAVES provide powerful support for top-down design and test methodologies and concurrent engineering practices. Although the syntax of WAVES is a subset of VHDL, no special support for using WAVES in a VHDL environment is defined within the language. This report will introduce and describe a VHDL package that was developed at Rome Laboratory to provide a software interface to support the use of WAVES in a VHDL environment. This VHDL package is referred to as the WAVES VHDL interface and has been proposed as a standard practice for a top-down design and test methodology using WAVES and VHDL. This report is not intended to provide a tutorial on VHDL or WAVES. It is assumed that the reader has an adequate understanding of the VHDL language and some modeling techniques. Further, it is assumed that the reader has an understanding of the WAVES language and can follow a simple Level 1 dataset description.
Hernandez-Figueroa, Hugo E; Recami, Erasmo
2013-01-01
This continuation and extension of the successful book ""Localized Waves"" by the same editors brings together leading researchers in non-diffractive waves to cover the most important results in their field and as such is the first to present the current state.The well-balanced presentation of theory and experiments guides readers through the background of different types of non-diffractive waves, their generation, propagation, and possible applications. The authors include a historical account of the development of the field, and cover different types of non-diffractive waves, including Airy
DEFF Research Database (Denmark)
Burcharth, H. F.; Frigaard, Peter
1989-01-01
Wave loads may be defined as time varying forces on a body resulting from the wave induced flow fields which surrounds the body in whole or in part. Such unsteady fluid forces are the net result of pressure and shear forces integrated over the instantaneous wetted area.......Wave loads may be defined as time varying forces on a body resulting from the wave induced flow fields which surrounds the body in whole or in part. Such unsteady fluid forces are the net result of pressure and shear forces integrated over the instantaneous wetted area....
David, P
2013-01-01
Propagation of Waves focuses on the wave propagation around the earth, which is influenced by its curvature, surface irregularities, and by passage through atmospheric layers that may be refracting, absorbing, or ionized. This book begins by outlining the behavior of waves in the various media and at their interfaces, which simplifies the basic phenomena, such as absorption, refraction, reflection, and interference. Applications to the case of the terrestrial sphere are also discussed as a natural generalization. Following the deliberation on the diffraction of the "ground? wave around the ear
Godin, Oleg A.
2015-04-01
Much like light and sound, acoustic-gravity waves in inhomogeneous atmosphere often have a caustic or caustics, where the ray theory predicts unphysical, divergent values of the wave amplitude and needs to be modified. Increase of the wave magnitude in the vicinity of a caustic makes such vicinities of primary interest in a number of problems, where a signal needs to be separated from a background noise. The value of wave focusing near caustics should be carefully quantified in order to evaluate possible nonlinearities promoted by the focusing. Physical understanding of the wave field in the vicinity of a caustic is also important for understanding of the wave reflection from and transmission (tunneling) through the caustic. To our knowledge, in contrast to caustics of acoustic, electromagnetic, and seismic waves as well as gravity waves in incompressible fluids, asymptotics of acoustic-gravity waves in the vicinity of a caustic have never been studied systematically. In this paper, we fill this gap. Atmospheric waves are considered as linear acoustic-gravity waves in a neutral, horizontally stratified, moving ideal gas of variable composition. Air temperature and wind velocity are assumed to be gradually varying functions of height, and slowness of these variations determines the large parameter of the problem. The scale height of the atmosphere can be large or small compared to the vertical wavelength. It is found that the uniform asymptotics of the wave field in the presence of a simple caustic can be expressed in terms of the Airy function and its derivative. As for the acoustic waves, the argument of the Airy function is expressed in terms of the eikonal calculated in the ray, or WKB, approximation. The geometrical, or Berry, phase, which arises in the consistent WKB approximation for acoustic-gravity waves, plays an important role in the caustic asymptotics. In the uniform asymptotics, the terms with the Airy function and its derivative are weighted by cosine
DEFF Research Database (Denmark)
Kofoed, Jens Peter
2017-01-01
shaped by the development, research, and teaching that we have carried out at the Wave Energy Research Group at Aalborg University over the past decades. It is our belief and experience that it would be useful writing and compiling such a handbook in order to enhance the understanding of the sector......This Handbook for Ocean Wave Energy aims at providing a guide into the field of ocean wave energy utilization. The handbook offers a concise yet comprehensive overview of the main aspects and disciplines involved in the development of wave energy converters (WECs). The idea for the book has been...
Gammino, S; Celona, L
2002-01-01
During recent experiments, a different behaviour of the electron cyclotron resonance (ECR) ion source CAESAR was observed at INFN-LNS, when it was operated by means of a travelling-wave-tube-based generator with respect to the standard operation by means of a klystron-based generator. The current available for argon-high charge states was significantly higher in the former case. The same test was repeated with the other source available at LNS, i.e. the superconducting ECR ion source SERSE, with oxygen in place of argon, and the results were similar. A description of the experimental set-up and of the results obtained in the two cases is given in the following.
Exitation of Whistler Waves by a Helical Wave Structure
DEFF Research Database (Denmark)
Balmashnov, A. A.; Lynov, Jens-Peter; Michelsen, Poul
1981-01-01
The excitation of whistler waves in a radial inhomogeneous plasma is investigated experimentally, using a slow-wave structure consisting of a helix of variable length surrounding the plasma column. The excited waves were observed to have a wave-vector parallel to the external magnetic field....... The possibility of exciting the waves in different radial regions is demonstrated....
Temchin, Andrei N; Recio-Spinoso, Alberto; Cai, Hongxue; Ruggero, Mario A
2012-08-01
Spatial magnitude and phase profiles for inner hair cell (IHC) depolarization throughout the chinchilla cochlea were inferred from responses of auditory-nerve fibers (ANFs) to threshold- and moderate-level tones and tone complexes. Firing-rate profiles for frequencies ≤2 kHz are bimodal, with the major peak at the characteristic place and a secondary peak at 3-5 mm from the extreme base. Response-phase trajectories are synchronous with peak outward stapes displacement at the extreme cochlear base and accumulate 1.5 period lags at the characteristic places. High-frequency phase trajectories are very similar to the trajectories of basilar-membrane peak velocity toward scala tympani. Low-frequency phase trajectories undergo a polarity flip in a region, 6.5-9 mm from the cochlear base, where traveling-wave phase velocity attains a local minimum and a local maximum and where the onset latencies of near-threshold impulse responses computed from responses to near-threshold white noise exhibit a local minimum. That region is the same where frequency-threshold tuning curves of ANFs undergo a shape transition. Since depolarization of IHCs presumably indicates the mechanical stimulus to their stereocilia, the present results suggest that distinct low-frequency forward waves of organ of Corti vibration are launched simultaneously at the extreme base of the cochlea and at the 6.5-9 mm transition region, from where antiphasic reflections arise.
Parametric analysis of change in wave number of surface waves
Directory of Open Access Journals (Sweden)
Tadić Ljiljana
2015-01-01
Full Text Available The paper analyzes the dependence of the change wave number of materials soil constants, ie the frequency of the waves. The starting point in this analysis cosists of wave equation and dynamic stiffness matrix of soil.
Design wave estimation considering directional distribution of waves
Digital Repository Service at National Institute of Oceanography (India)
SanilKumar, V.; Deo, M.C.
The design of coastal and offshore structures requires design significant wave height having a certain return period. The commonly followed procedure to estimate the design wave height, does not give any consideration to the directions of waves...
Indian Academy of Sciences (India)
Conformal transformations; conformal Killing vectors; -waves. Abstract. Brinkmann [1] has shown that conformally related distinct Ricci flat solutions are -waves. Brinkmann's result has been generalized to include the conformally invariant source terms. It has been shown that [4] if g i k and g ¯ i k ( = − 2 g i k , : a ...
Gravitational waves from inflation
Guzzetti, M. C.; Bartolo, N.; Liguori, M.; Matarrese, S.
2016-09-01
The production of a stochastic background of gravitational waves is a fundamental prediction of any cosmological inflationary model. The features of such a signal encode unique information about the physics of the Early Universe and beyond, thus representing an exciting, powerful window on the origin and evolution of the Universe. We review the main mechanisms of gravitational-wave production, ranging from quantum fluctuations of the gravitational field to other mechanisms that can take place during or after inflation. These include e.g. gravitational waves generated as a consequence of extra particle production during inflation, or during the (p)reheating phase. Gravitational waves produced in inflation scenarios based on modified gravity theories and second-order gravitational waves are also considered. For each analyzed case, the expected power spectrum is given. We discuss the discriminating power among different models, associated with the validity/violation of the standard consistency relation between tensor-to-scalar ratio r and tensor spectral index nT. In light of the prospects for (directly/indirectly) detecting primordial gravitational waves, we give the expected present-day gravitational radiation spectral energy-density, highlighting the main characteristics imprinted by the cosmic thermal history, and we outline the signatures left by gravitational waves on the Cosmic Microwave Background and some imprints in the Large-Scale Structure of the Universe. Finally, current bounds and prospects of detection for inflationary gravitational waves are summarized.
Houlrik, Jens Madsen
2009-01-01
The Lorentz transformation applies directly to the kinematics of moving particles viewed as geometric points. Wave propagation, on the other hand, involves moving planes which are extended objects defined by simultaneity. By treating a plane wave as a geometric object moving at the phase velocity, novel results are obtained that illustrate the…
Those Elusive Gravitational Waves
MOSAIC, 1976
1976-01-01
The presence of gravitational waves was predicted by Einstein in his theory of General Relativity. Since then, scientists have been attempting to develop a detector sensitive enough to measure these cosmic signals. Once the presence of gravitational waves is confirmed, scientists can directly study star interiors, galaxy cores, or quasars. (MA)
Energy Technology Data Exchange (ETDEWEB)
Simmons, N. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Myers, S. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Johannesson, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Matzel, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2012-10-06
[1] We develop a global-scale P wave velocity model (LLNL-G3Dv3) designed to accurately predict seismic travel times at regional and teleseismic distances simultaneously. The model provides a new image of Earth's interior, but the underlying practical purpose of the model is to provide enhanced seismic event location capabilities. The LLNL-G3Dv3 model is based on ∼2.8 millionP and Pnarrivals that are re-processed using our global multiple-event locator called Bayesloc. We construct LLNL-G3Dv3 within a spherical tessellation based framework, allowing for explicit representation of undulating and discontinuous layers including the crust and transition zone layers. Using a multiscale inversion technique, regional trends as well as fine details are captured where the data allow. LLNL-G3Dv3 exhibits large-scale structures including cratons and superplumes as well numerous complex details in the upper mantle including within the transition zone. Particularly, the model reveals new details of a vast network of subducted slabs trapped within the transition beneath much of Eurasia, including beneath the Tibetan Plateau. We demonstrate the impact of Bayesloc multiple-event location on the resulting tomographic images through comparison with images produced without the benefit of multiple-event constraints (single-event locations). We find that the multiple-event locations allow for better reconciliation of the large set of direct P phases recorded at 0–97° distance and yield a smoother and more continuous image relative to the single-event locations. Travel times predicted from a 3-D model are also found to be strongly influenced by the initial locations of the input data, even when an iterative inversion/relocation technique is employed.
Parsimonious Surface Wave Interferometry
Li, Jing
2017-10-24
To decrease the recording time of a 2D seismic survey from a few days to one hour or less, we present a parsimonious surface-wave interferometry method. Interferometry allows for the creation of a large number of virtual shot gathers from just two reciprocal shot gathers by crosscoherence of trace pairs, where the virtual surface waves can be inverted for the S-wave velocity model by wave-equation dispersion inversion (WD). Synthetic and field data tests suggest that parsimonious wave-equation dispersion inversion (PWD) gives S-velocity tomograms that are comparable to those obtained from a full survey with a shot at each receiver. The limitation of PWD is that the virtual data lose some information so that the resolution of the S-velocity tomogram can be modestly lower than that of the S-velocity tomogram inverted from a conventional survey.
Electromagnetic wave energy converter
Bailey, R. L. (Inventor)
1973-01-01
Electromagnetic wave energy is converted into electric power with an array of mutually insulated electromagnetic wave absorber elements each responsive to an electric field component of the wave as it impinges thereon. Each element includes a portion tapered in the direction of wave propagation to provide a relatively wideband response spectrum. Each element includes an output for deriving a voltage replica of the electric field variations intercepted by it. Adjacent elements are positioned relative to each other so that an electric field subsists between adjacent elements in response to the impinging wave. The electric field results in a voltage difference between adjacent elements that is fed to a rectifier to derive dc output power.
Ion Acoustic Waves in the Presence of Electron Plasma Waves
DEFF Research Database (Denmark)
Michelsen, Poul; Pécseli, Hans; Juul Rasmussen, Jens
1977-01-01
Long-wavelength ion acoustic waves in the presence of propagating short-wavelength electron plasma waves are examined. The influence of the high frequency oscillations is to decrease the phase velocity and the damping distance of the ion wave.......Long-wavelength ion acoustic waves in the presence of propagating short-wavelength electron plasma waves are examined. The influence of the high frequency oscillations is to decrease the phase velocity and the damping distance of the ion wave....
4-wave dynamics in kinetic wave turbulence
Chibbaro, Sergio; Dematteis, Giovanni; Rondoni, Lamberto
2018-01-01
A general Hamiltonian wave system with quartic resonances is considered, in the standard kinetic limit of a continuum of weakly interacting dispersive waves with random phases. The evolution equation for the multimode characteristic function Z is obtained within an ;interaction representation; and a perturbation expansion in the small nonlinearity parameter. A frequency renormalization is performed to remove linear terms that do not appear in the 3-wave case. Feynman-Wyld diagrams are used to average over phases, leading to a first order differential evolution equation for Z. A hierarchy of equations, analogous to the Boltzmann hierarchy for low density gases is derived, which preserves in time the property of random phases and amplitudes. This amounts to a general formalism for both the N-mode and the 1-mode PDF equations for 4-wave turbulent systems, suitable for numerical simulations and for investigating intermittency. Some of the main results which are developed here in detail have been tested numerically in a recent work.
Stress wave propagation on standing trees. Part 2, Formation of 3D stress wave contour maps.
Juan Su; Houjiang Zhang; Xiping Wang
2009-01-01
Nondestructive evaluation (NDE) of wood quality in standing trees is an important procedure in the forest operational value chain worldwide. The goal of this paper is to investigate how a stress wave travel in a tree stem as it is introduced into the tree through a mechanical impact. Experimental stress wave data was obtained on freshly cut red pine logs in the...
Abnormal Waves Modelled as Second-order Conditional Waves
DEFF Research Database (Denmark)
Jensen, Jørgen Juncher
2005-01-01
The paper presents results for the expected second order short-crested wave conditional of a given wave crest at a specific point in time and space. The analysis is based on the second order Sharma and Dean shallow water wave theory. Numerical results showing the importance of the spectral density......, the water depth and the directional spreading on the conditional mean wave profile are presented. Application of conditional waves to model and explain abnormal waves, e.g. the well-known New Year Wave measured at the Draupner platform January 1st 1995, is discussed. Whereas the wave profile can be modelled...... quite well by the second order conditional wave including directional spreading and finite water depth the probability to encounter such a wave is still, however, extremely rare. The use of the second order conditional wave as initial condition to a fully non-linear three-dimensional analysis...
Inner harbour wave agitation using boussinesq wave model
Directory of Open Access Journals (Sweden)
Panigrahi Jitendra K.
2015-01-01
Full Text Available Short crested waves play an important role for planning and design of harbours. In this context a numerical simulation is carried out to evaluate wave tranquility inside a real harbour located in east coast of India. The annual offshore wave climate proximity- to harbour site is established using Wave Model (WAM hindcast wave data. The deep water waves are transformed to harbour front using a Near Shore spectral Wave model (NSW. A directional analysis is carried out to determine the probable incident wave directions towards the harbour. Most critical threshold wave height and wave period is chosen for normal operating conditions using exceedence probability analysis. Irregular random waves from various directions are generated confirming to Pierson Moskowitz spectrum at 20m water depth. Wave incident into inner harbor through harbor entrance is performed using Boussinesq Wave model (BW. Wave disturbance experienced inside the harbour and at various berths are analysed. The paper discusses the progresses took place in short wave modeling and it demonstrates application of wave climate for the evaluation of harbor tranquility using various types of wave models.
Inner harbour wave agitation using boussinesq wave model
Directory of Open Access Journals (Sweden)
Jitendra K. Panigrahi
2015-01-01
Full Text Available Short crested waves play an important role for planning and design of harbours. In this context a numerical simulation is carried out to evaluate wave tranquility inside a real harbour located in east coast of India. The annual offshore wave climate proximity to harbour site is established using Wave Model (WAM hindcast wave data. The deep water waves are transformed to harbour front using a Near Shore spectral Wave model (NSW. A directional analysis is carried out to determine the probable incident wave directions towards the harbour. Most critical threshold wave height and wave period is chosen for normal operating conditions using exceedence probability analysis. Irregular random waves from various directions are generated confirming to Pierson Moskowitz spectrum at 20 m water depth. Wave incident into inner harbor through harbor entrance is performed using Boussinesq Wave model (BW. Wave disturbance experienced inside the harbour and at various berths are analysed. The paper discusses the progresses took place in short wave modeling and it demonstrates application of wave climate for the evaluation of harbor tranquility using various types of wave models.
Mandal, Birendra Nath
2015-01-01
The theory of water waves is most varied and is a fascinating topic. It includes a wide range of natural phenomena in oceans, rivers, and lakes. It is mostly concerned with elucidation of some general aspects of wave motion including the prediction of behaviour of waves in the presence of obstacles of some special configurations that are of interest to ocean engineers. Unfortunately, even the apparently simple problems appear to be difficult to tackle mathematically unless some simplified assumptions are made. Fortunately, one can assume water to be an incompressible, in viscid and homogeneous
DEFF Research Database (Denmark)
Jensen, J.; Houmann, Jens Christian Gylden; Bjerrum Møller, Hans
1975-01-01
The energies of spin waves propagating in the c direction of Tb have been studied by inelastic neutron scattering, as a function of a magnetic field applied along the easy and hard directions in the basal plane, and as a function of temperature. From a general spin Hamiltonian, consistent...... with the symmetry, we deduce the dispersion relation for the spin waves in a basal-plane ferromagnet. This phenomenological spin-wave theory accounts for the observed behavior of the magnon energies in Tb. The two q⃗-dependent Bogoliubov components of the magnon energies are derived from the experimental results...
Kaliski, S
2013-01-01
This book gives a comprehensive overview of wave phenomena in different media with interacting mechanical, electromagnetic and other fields. Equations describing wave propagation in linear and non-linear elastic media are followed by equations of rheological models, models with internal rotational degrees of freedom and non-local interactions. Equations for coupled fields: thermal, elastic, electromagnetic, piezoelectric, and magneto-spin with adequate boundary conditions are also included. Together with its companion volume Vibrations and Waves. Part A: Vibrations this work provides a wealth
Corinaldesi, Ernesto
1963-01-01
Geared toward advanced undergraduate and graduate students of physics, this text provides readers with a background in relativistic wave mechanics and prepares them for the study of field theory. The treatment originated as a series of lectures from a course on advanced quantum mechanics that has been further amplified by student contributions.An introductory section related to particles and wave functions precedes the three-part treatment. An examination of particles of spin zero follows, addressing wave equation, Lagrangian formalism, physical quantities as mean values, translation and rotat
Christhilf, David M.
2014-01-01
It has long been recognized that frequency and phasing of structural modes in the presence of airflow play a fundamental role in the occurrence of flutter. Animation of simulation results for the long, slender Semi-Span Super-Sonic Transport (S4T) wind-tunnel model demonstrates that, for the case of mass-ballasted nacelles, the flutter mode can be described as a traveling wave propagating downstream. Such a characterization provides certain insights, such as (1) describing the means by which energy is transferred from the airflow to the structure, (2) identifying airspeed as an upper limit for speed of wave propagation, (3) providing an interpretation for a companion mode that coalesces in frequency with the flutter mode but becomes very well damped, (4) providing an explanation for bursts of response to uniform turbulence, and (5) providing an explanation for loss of low frequency (lead) phase margin with increases in dynamic pressure (at constant Mach number) for feedback systems that use sensors located upstream from active control surfaces. Results from simulation animation, simplified modeling, and wind-tunnel testing are presented for comparison. The simulation animation was generated using double time-integration in Simulink of vertical accelerometer signals distributed over wing and fuselage, along with time histories for actuated control surfaces. Crossing points for a zero-elevation reference plane were tracked along a network of lines connecting the accelerometer locations. Accelerometer signals were used in preference to modal displacement state variables in anticipation that the technique could be used to animate motion of the actual wind-tunnel model using data acquired during testing. Double integration of wind-tunnel accelerometer signals introduced severe drift even with removal of both position and rate biases such that the technique does not currently work. Using wind-tunnel data to drive a Kalman filter based upon fitting coefficients to
Cell shape dynamics: from waves to migration.
Directory of Open Access Journals (Sweden)
Meghan K Driscoll
Full Text Available We observe and quantify wave-like characteristics of amoeboid migration. Using the amoeba Dictyostelium discoideum, a model system for the study of chemotaxis, we demonstrate that cell shape changes in a wave-like manner. Cells have regions of high boundary curvature that propagate from the leading edge toward the back, usually along alternating sides of the cell. Curvature waves are easily seen in cells that do not adhere to a surface, such as cells that are electrostatically repelled from surfaces or cells that extend over the edge of micro-fabricated cliffs. Without surface contact, curvature waves travel from the leading edge to the back of a cell at -35 µm/min. Non-adherent myosin II null cells do not exhibit these curvature waves. At the leading edge of adherent cells, curvature waves are associated with protrusive activity. Like regions of high curvature, protrusive activity travels along the boundary in a wave-like manner. Upon contact with a surface, the protrusions stop moving relative to the surface, and the boundary shape thus reflects the history of protrusive motion. The wave-like character of protrusions provides a plausible mechanism for the zig-zagging of pseudopods and for the ability of cells both to swim in viscous fluids and to navigate complex three dimensional topography.
Wave Height Distribution for Nonlinear Swell Waves in Deep an Depth Limited Wave Conditions
DEFF Research Database (Denmark)
Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Knudsen, Jannie Elkær
2017-01-01
This paper presents initial results from an on-going study on the influence from wave nonlinearity on the wave height distribution in deep- and depth-limited nonlinear wave conditions. A fully nonlinear VOF model, IH-2VOF, is applied to model the propagation of irregular waves on a sloping sea bed...... from deep to shallow water, including the effects of wave breaking. Different wave nonlinearities are evaluated in the model and the effects of the wave nonlinearity, described by the so-called Ursell-number, on the wave height distributions along the sloping sea bed are evaluated. The widely used...