WorldWideScience

Sample records for water desalination plants

  1. Desalination plant aids Australian water shortage

    Energy Technology Data Exchange (ETDEWEB)

    Stocking, A.W.

    2010-09-15

    This article described a reverse-osmosis desalination plant that was commissioned for Adelaide, South Australia, which operates under permanent water restrictions. The plant will supplement the freshwater supply, reduce the pressure on the existing rainwater catchment system, and allow water levels to regenerate. The company that won the bid on the project used 3-dimensional modelling to get accurate cost estimates and visualize the plant impact on the environment, the community, and a culturally important site. A detailed diffusion plan was devised to mitigate the effects of saline concentrate release. As reverse osmosis is so energy intensive that it can be difficult to justify a plant on sustainability grounds. Energy recovery devices were included in the process building and outfall shaft, and solar energy panels will be installed on the process building roof. The energy recovery devices use energy stored in the brine to increase the output of the high-pressure pumps that feed the reverse osmosis units. Energy recovery units in the outfall shaft will produce electricity and provide power to the grid for the process plant to use. The 3-dimensional model was credited as a key factor in winning the bid, and the many advantages of 3-dimensional modelling were described. 3 figs.

  2. On fuzzy control of water desalination plants

    Energy Technology Data Exchange (ETDEWEB)

    Titli, A. [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France); Jamshidi, M. [New Mexico Univ., Albuquerque, NM (United States); Olafsson, F. [Institute of Technology, Norway (Norway)

    1995-12-31

    In this report we have chosen a sub-system of an MSF water desalination plant, the brine heater, for analysis, synthesis, and simulation. This system has been modelled and implemented on computer. A fuzzy logic controller (FLC) for the top brine temperature control loop has been designed and implemented on the computer. The performance of the proposed FLC is compared with three other conventional control strategies: PID, cascade and disturbance rejection control. One major concern on FLC`s has been the lack of stability criteria. An up to-date survey of stability of fuzzy control systems is given. We have shown stability of the proposed FLC using the Sinusoidal Input Describing Functions (SIDF) method. The potential applications of fuzzy controllers for complex and large-scale systems through hierarchy of rule sets and hybridization with conventional approaches are also investigated. (authors)

  3. Improvement of water desalination technologies in reverse osmosis plants

    Science.gov (United States)

    Vysotskii, S. P.; Konoval'chik, M. V.; Gul'ko, S. E.

    2017-07-01

    The strengthening of requirements for the protection of surface-water sources and increases in the cost of reagents lead to the necessity of using membrane (especially, reverse osmosis) technologies of water desalination as an alternative to ion-exchange technologies. The peculiarities of using reverse osmosis technologies in the desalination of waters with an increased salinity have been discussed. An analogy has been made between the dependence of the adsorptive capacity of ion-exchange resins on the reagent consumption during ion exchange and the dependence of the specific ion flux on the voltage in the electrodialysis and productivity of membrane elements on the excess of the pressure of source water over the osmotic pressure in reverse osmosis. It has been proposed to regulate the number of water desalination steps in reverse osmosis plants, which makes it possible to flexibly change the productivity of equipment and the level of desalinization, depending on the requirements for the technological process. It is shown that the selectivity of reverse osmotic membranes with respect to bivalent ions (calcium, magnesium, and sulfates) is approximately four times higher than the selectivity with respect to monovalent ions (sodium and chlorine). The process of desalination in reverse osmosis plants depends on operation factors, such as the salt content and ion composition of source water, the salt content of the concentrate, and the temperatures of solution and operating pressure, and the design features of devices, such as the length of the motion of the desalination water flux, the distance between membranes, and types of membranes and turbulators (spacers). To assess the influence of separate parameters on the process of reverse osmosis desalination of water solutions, we derived criteria equations by compiling problem solution matrices on the basis of the dimensional method, taking into account the Huntley complement. The operation of membrane elements was

  4. Thermodynamic optimisation of a boiler feed water desalination plant / Philippus Johannes van der Walt

    OpenAIRE

    Van der Walt, Philippus Johannes

    2014-01-01

    In the process of electricity generation, water is used as the working fluid to transport energy from the fuel to the turbine. This water has to be ultrapure in order to reduce maintenance cost on the boilers. For the production of ultrapure water, a desalination process is used. This process consists of an ultrafiltration pretreatment section, two reverse osmosis stages and a continuous electrodeionisation stage. Reverse osmosis desalination plants are, however, inherently inefficient wit...

  5. State of the reverse osmosis membrane of sea water corso plant desalination (Algiers)

    Science.gov (United States)

    Abdessemed, D.; Hamouni, S.; Nezzal, G.

    2009-11-01

    Seawater reverse osmosis (SWRO) desalination is being increasingly emphasized as a strategy for conservation of limited resources of freshwater. Although desalination has been developed for the last few decades, the SWRO operation is still affected by membrane fouling. The membrane fouling of SWRO has a significant impact on operation of desalination plants. We follow the evolution of the permeate conductivity during three months of the sea water Corso (Algiers) plant desalination. The purpose of this work is to conduct an autopsy of fouled membranes in seawater using the scanning electron microscopy (SEM) coupled by an analysis EDX. This membrane shows a change of the surface morphology, which justifies the abrupt increase in the conductivity of the permeate in May 2006. In order to identify the nature of the fouling deposit, we analysed this deposit by Xrays diffraction (XRD).

  6. Analysis the Existence of Heterotrophic Bacteria in Active Water Desalination Plant Output of Kashan City, Iran

    Directory of Open Access Journals (Sweden)

    Hosseindoost Gh. MSc,

    2015-12-01

    Full Text Available Aims One of the consequences of taking ground water into surface is changing its chemical quality, specially increasing the concentration of dissolved salts. This research was performed in order to analyze growth possibility of heterotrophic bacteria in the membrane of active desalination plants in Kashan City, Iran. Instrument & Methods This descriptive cross-sectional study was done on water output of 20 active desalination plants in 2013 in Kashan City, Iran and 200 specimens of input and output water was randomly extracted from desalination plants. Awareness and education level of system operators, filter changing intervals, HPC of input and output water and chlorine concentration of input and output water were measured and recorded. Obtained data were analyzed statistically with SPSS 18 software using one-way ANOVA, Chi-square, McNemar and one-sample T tests. Findings There was a significant relation between the interval time and output HPC level of the plants (p0.05. The mean concentration of chlorine in samples of 20 desalination plants was 0.76±0.44mg/l in input water and 0.64±0.52mg/l in output water (p>0.05. Level of awareness had significant relation with the output water pollution with HPC (p0.05. Conclusion The mean level of HPC

  7. Predictive Control Applied to a Solar Desalination Plant Connected to a Greenhouse with Daily Variation of Irrigation Water Demand

    Directory of Open Access Journals (Sweden)

    Lidia Roca

    2016-03-01

    Full Text Available The water deficit in the Mediterranean area is a known matter severely affecting agriculture. One way to avoid the aquifers’ exploitation is to supply water to crops by using thermal desalination processes. Moreover, in order to guarantee long-term sustainability, the required thermal energy for the desalination process can be provided by solar energy. This paper shows simulations for a case study in which a solar multi-effect distillation plant produces water for irrigation purposes. Detailed models of the involved systems are the base of a predictive controller to operate the desalination plant and fulfil the water demanded by the crops.

  8. Potential effects of desalinated water quality on the operation stability of wastewater treatment plants.

    Science.gov (United States)

    Lew, Beni; Cochva, Malka; Lahav, Ori

    2009-03-15

    Desalinated water is expected to become the major source of drinking water in many places in the near future, and thus the major source of wastewater to arrive at wastewater treatment plants. The paper examines the effect of the alkalinity value with which the water is released from the desalination plant on the alkalinity value that would develop within the wastewater treatment process under various nitrification-denitrification operational scenarios. The main hypothesis was that the difference in the alkalinity value between tap water and domestic wastewater is almost exclusively a result of the hydrolysis of urea (NH(2)CONH(2), excreted in the human urine) to ammonia (NH(3)), regardless of the question what fraction of NH(3(aq)) is transformed to NH(4)(+). Results from a field study show that the ratio between the alkalinity added to tap water when raw wastewater is formed (in meq/l units) and the TAN (total ammonia nitrogen, mole/l) concentration in the raw wastewater is almost 1:1 in purely domestic sewage and close to 1:1 in domestic wastewater streams mixed with light industry wastewaters. Having established the relationship between TAN and total alkalinity in raw wastewater the paper examines three theoretical nitrification-denitrification treatment scenarios in the wastewater treatment plant (WWTP). The conclusion is that if low-alkalinity desalinated water constitutes the major water source arriving at the WWTP, external alkalinity will have to be added in order to avoid pH drop and maintain process stability. The results lead to the conclusion that supplying desalinated water with a high alkalinity value (e.g. > or =100 mg/l as CaCO(3)) would likely prevent the need to add costly basic chemicals in the WWTP, while, in addition, it would improve the chemical and biological stability of the drinking water in the distribution system.

  9. An arduino based control system for a brackish water desalination plant

    Science.gov (United States)

    Caraballo, Ginna

    Water scarcity for agriculture is one of the most important challenges to improve food security worldwide. In this thesis we study the potential to develop a low-cost controller for a small scale brackish desalination plant that consists of proven water treatment technologies, reverse osmosis, cation exchange, and nanofiltration to treat groundwater into two final products: drinking water and irrigation water. The plant is powered by a combination of wind and solar power systems. The low-cost controller uses Arduino Mega, and Arduino DUE, which consist of ATmega2560 and Atmel SAM3X8E ARM Cortex-M3 CPU microcontrollers. These are widely used systems characterized for good performance and low cost. However, Arduino also requires drivers and interfaces to allow the control and monitoring of sensors and actuators. The thesis explains the process, as well as the hardware and software implemented.

  10. Water Desalination with Wires

    NARCIS (Netherlands)

    Porada, S.; Sales, B.B.; Hamelers, H.V.M.; Biesheuvel, P.M.

    2012-01-01

    We show the significant potential of water desalination using a novel capacitive wire-based technology in which anode/cathode wire pairs are constructed from coating a thin porous carbon electrode layer on top of electrically conducting rods (or wires). By alternately dipping an array of electrode

  11. Water Desalination Using Geothermal Energy

    OpenAIRE

    Noreddine Ghaffour; , Hacene Mahmoudi; Mattheus Goosen

    2010-01-01

    The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only...

  12. Bacterial community structure and variation in a full-scale seawater desalination plant for drinking water production

    KAUST Repository

    Belila, Abdelaziz

    2016-02-18

    Microbial processes inevitably play a role in membrane-based desalination plants, mainly recognized as membrane biofouling. We assessed the bacterial community structure and diversity during different treatment steps in a full-scale seawater desalination plant producing 40,000 m3/d of drinking water. Water samples were taken over the full treatment train consisting of chlorination, spruce media and cartridge filters, de-chlorination, first and second pass reverse osmosis (RO) membranes and final chlorine dosage for drinking water distribution. The water samples were analyzed for water quality parameters (total bacterial cell number, total organic carbon, conductivity, pH, etc.) and microbial community composition by 16S rRNA gene pyrosequencing. The planktonic microbial community was dominated by Proteobacteria (48.6%) followed by Bacteroidetes (15%), Firmicutes (9.3%) and Cyanobacteria (4.9%). During the pretreatment step, the spruce media filter did not impact the bacterial community composition dominated by Proteobacteria. In contrast, the RO and final chlorination treatment steps reduced the Proteobacterial relative abundance in the produced water where Firmicutes constituted the most dominant bacterial group. Shannon and Chao1 diversity indices showed that bacterial species richness and diversity decreased during the seawater desalination process. The two-stage RO filtration strongly reduced the water conductivity (>99%), TOC concentration (98.5%) and total bacterial cell number (>99%), albeit some bacterial DNA was found in the water after RO filtration. About 0.25% of the total bacterial operational taxonomic units (OTUs) were present in all stages of the desalination plant: the seawater, the RO permeates and the chlorinated drinking water, suggesting that these bacterial strains can survive in different environments such as high/low salt concentration and with/without residual disinfectant. These bacterial strains were not caused by contamination during

  13. Bacterial community structure and variation in a full-scale seawater desalination plant for drinking water production.

    Science.gov (United States)

    Belila, A; El-Chakhtoura, J; Otaibi, N; Muyzer, G; Gonzalez-Gil, G; Saikaly, P E; van Loosdrecht, M C M; Vrouwenvelder, J S

    2016-05-01

    Microbial processes inevitably play a role in membrane-based desalination plants, mainly recognized as membrane biofouling. We assessed the bacterial community structure and diversity during different treatment steps in a full-scale seawater desalination plant producing 40,000 m(3)/d of drinking water. Water samples were taken over the full treatment train consisting of chlorination, spruce media and cartridge filters, de-chlorination, first and second pass reverse osmosis (RO) membranes and final chlorine dosage for drinking water distribution. The water samples were analyzed for water quality parameters (total bacterial cell number, total organic carbon, conductivity, pH, etc.) and microbial community composition by 16S rRNA gene pyrosequencing. The planktonic microbial community was dominated by Proteobacteria (48.6%) followed by Bacteroidetes (15%), Firmicutes (9.3%) and Cyanobacteria (4.9%). During the pretreatment step, the spruce media filter did not impact the bacterial community composition dominated by Proteobacteria. In contrast, the RO and final chlorination treatment steps reduced the Proteobacterial relative abundance in the produced water where Firmicutes constituted the most dominant bacterial group. Shannon and Chao1 diversity indices showed that bacterial species richness and diversity decreased during the seawater desalination process. The two-stage RO filtration strongly reduced the water conductivity (>99%), TOC concentration (98.5%) and total bacterial cell number (>99%), albeit some bacterial DNA was found in the water after RO filtration. About 0.25% of the total bacterial operational taxonomic units (OTUs) were present in all stages of the desalination plant: the seawater, the RO permeates and the chlorinated drinking water, suggesting that these bacterial strains can survive in different environments such as high/low salt concentration and with/without residual disinfectant. These bacterial strains were not caused by contamination during

  14. Stacked microbial desalination cells to enhance water desalination efficiency.

    Science.gov (United States)

    Chen, Xi; Xia, Xue; Liang, Peng; Cao, Xiaoxin; Sun, Haotian; Huang, Xia

    2011-03-15

    Microbial desalination cell (MDC) is a new method to obtain clean water from brackish water using electricity generated from organic matters by exoelectrogenic bacteria. Anions and cations, derived from salt solution filled in the desalination chamber between the anode and cathode, move to the anode and cathode chambers under the force of electrical field, respectively. On the basis of the primitive single-desalination-chambered MDC, stacked microbial desalination cells (SMDCs) were developed in order to promote the desalination rate in the present study. The effects of desalination chamber number and external resistance were investigated. Results showed that a remarkable increase in the total desalination rate (TDR) could be obtained by means of increasing the desalination cell number and reducing the external resistance, which caused the charge transfer efficiency increased since the SMDCs enabled more pairs of ions separated while one electron passed through the external circuit. The maximum TDR of 0.0252 g/h was obtained using a two-desalination-chambered SMDC with an external resistance of 10 Ω, which was 1.4 times that of single-desalination-chambered MDC. SMDCs proved to be an effective approach to increase the total water desalination rate if provided a proper desalination chamber number and external resistance.

  15. State of the art in the process design of large sea water desalination plants; Estado del arte en el diseno del proceso de plantas desaladoras de agua de mar de gran capacidad

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Sanchez, J. M.; Sanchez Castillo, N.; Sanchez Castillo, R.

    2008-07-01

    The desalination of seawater is used in commercial operations worldwide in order to obtain large quantities of proper water for population supply, irrigation or industrial uses. The designs of the processes which are involved in desalination are changing all the time. In this paper the evolution of the processes of seawater desalination plants will be discussed. It will focus on large Reverse Osmosis desalination plants: also it will discuss the reasons of this evolution. (Author) 8 refs.

  16. Water Desalination Using Geothermal Energy

    Directory of Open Access Journals (Sweden)

    Noreddine Ghaffour

    2010-08-01

    Full Text Available The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only in the presence of cheap geothermal reservoirs or in decentralized applications focusing on small-scale water supplies in coastal regions, provided that society is able and willing to pay for desalting.

  17. Water Desalination using geothermal energy

    KAUST Repository

    Goosen, M.

    2010-08-03

    The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only in the presence of cheap geothermal reservoirs or in decentralized applications focusing on small-scale water supplies in coastal regions, provided that society is able and willing to pay for desalting. 2010 by the authors; licensee MDPI, Basel, Switzerland.

  18. Nanostructured materials for water desalination

    Energy Technology Data Exchange (ETDEWEB)

    Humplik, T; Lee, J; O' Hern, S C; Fellman, B A; Karnik, R; Wang, E N [Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge (United States); Baig, M A; Hassan, S F; Atieh, M A; Rahman, F; Laoui, T, E-mail: tlaoui@kfupm.edu.sa, E-mail: karnik@mit.edu, E-mail: enwang@mit.edu [Departments of Mechanical Engineering and Chemical Engineering and Research Institute, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia)

    2011-07-22

    Desalination of seawater and brackish water is becoming an increasingly important means to address the scarcity of fresh water resources in the world. Decreasing the energy requirements and infrastructure costs of existing desalination technologies remains a challenge. By enabling the manipulation of matter and control of transport at nanometer length scales, the emergence of nanotechnology offers new opportunities to advance water desalination technologies. This review focuses on nanostructured materials that are directly involved in the separation of water from salt as opposed to mitigating issues such as fouling. We discuss separation mechanisms and novel transport phenomena in materials including zeolites, carbon nanotubes, and graphene with potential applications to reverse osmosis, capacitive deionization, and multi-stage flash, among others. Such nanostructured materials can potentially enable the development of next-generation desalination systems with increased efficiency and capacity. (topical review)

  19. Nanostructured materials for water desalination

    Science.gov (United States)

    Humplik, T.; Lee, J.; O'Hern, S. C.; Fellman, B. A.; Baig, M. A.; Hassan, S. F.; Atieh, M. A.; Rahman, F.; Laoui, T.; Karnik, R.; Wang, E. N.

    2011-07-01

    Desalination of seawater and brackish water is becoming an increasingly important means to address the scarcity of fresh water resources in the world. Decreasing the energy requirements and infrastructure costs of existing desalination technologies remains a challenge. By enabling the manipulation of matter and control of transport at nanometer length scales, the emergence of nanotechnology offers new opportunities to advance water desalination technologies. This review focuses on nanostructured materials that are directly involved in the separation of water from salt as opposed to mitigating issues such as fouling. We discuss separation mechanisms and novel transport phenomena in materials including zeolites, carbon nanotubes, and graphene with potential applications to reverse osmosis, capacitive deionization, and multi-stage flash, among others. Such nanostructured materials can potentially enable the development of next-generation desalination systems with increased efficiency and capacity.

  20. Nanostructured materials for water desalination.

    Science.gov (United States)

    Humplik, T; Lee, J; O'Hern, S C; Fellman, B A; Baig, M A; Hassan, S F; Atieh, M A; Rahman, F; Laoui, T; Karnik, R; Wang, E N

    2011-07-22

    Desalination of seawater and brackish water is becoming an increasingly important means to address the scarcity of fresh water resources in the world. Decreasing the energy requirements and infrastructure costs of existing desalination technologies remains a challenge. By enabling the manipulation of matter and control of transport at nanometer length scales, the emergence of nanotechnology offers new opportunities to advance water desalination technologies. This review focuses on nanostructured materials that are directly involved in the separation of water from salt as opposed to mitigating issues such as fouling. We discuss separation mechanisms and novel transport phenomena in materials including zeolites, carbon nanotubes, and graphene with potential applications to reverse osmosis, capacitive deionization, and multi-stage flash, among others. Such nanostructured materials can potentially enable the development of next-generation desalination systems with increased efficiency and capacity.

  1. A Grid-Connected Desalination Plant Operation

    Directory of Open Access Journals (Sweden)

    Won Ko

    2013-02-01

    Full Text Available In this paper, a grid-connected desalination plant operation approach is suggested. In desalination plant, large amount of energy is needed to operate pump and motor; hence most of energy is electricity. For this reason, the largest part of the operation cost is electricity charges. To demonstrate power usage, small size desalination measuring system mounted plant is used. Finally, to show the result of a grid-connected desalination plant operation, electric tariff rate of Korea is used. The result shows that total cost reduction rate is calculated about 1.6% of annual total electric plant operation cost.

  2. Source water quality shaping different fouling scenarios in a full-scale desalination plant at the Red Sea

    KAUST Repository

    Khan, Muhammad

    2013-02-01

    The complexity of Reverse Osmosis (RO) membrane fouling phenomenon has been widely studied and several factors influencing it have been reported by many researchers. This original study involves the investigation of two different fouling profiles produced at a seawater RO desalination plant installed on a floating mobile barge. The plant was moved along the coastline of the Red Sea in Saudi Arabia. The two locations where the barge was anchored showed different water quality. At the second location, two modules were harvested. One of the modules was pre-fouled by inorganics during plant operation at the previous site while the other was installed at the second site. Fouled membranes were subjected to a wide range of chemical and microbiological characterization procedures. Drastically different fouling patterns were observed in the two membranes which indicates the influence of source water quality on membrane surface modification and on fouling of RO membranes. © 2012 Elsevier Ltd.

  3. Water desalination via capacitive deionization

    NARCIS (Netherlands)

    Suss, M.E.; Porada, S.; Sun, X.; Biesheuvel, P.M.; Yoon, J.; Presser, V.

    2015-01-01

    Capacitive deionization (CDI) is an emerging technology for the facile removal of charged ionic species from aqueous solutions, and is currently being widely explored for water desalination applications. The technology is based on ion electrosorption at the surface of a pair of electrically charg

  4. Water desalination via capacitive deionization

    NARCIS (Netherlands)

    Suss, M.E.; Porada, S.; Sun, X.; Biesheuvel, P.M.; Yoon, J.; Presser, V.

    2015-01-01

    Capacitive deionization (CDI) is an emerging technology for the facile removal of charged ionic species from aqueous solutions, and is currently being widely explored for water desalination applications. The technology is based on ion electrosorption at the surface of a pair of electrically charg

  5. A New Method for Water Desalination Using Microbial Desalination Cells

    KAUST Repository

    Cao, Xiaoxin

    2009-09-15

    Current water desalination techniques are energy intensive and some use membranes operated at high pressures. It is shownhere that water desalination can be accomplished without electrical energy input or high water pressure by using a source of organic matter as the fuel to desalinate water. A microbial fuel cell was modified by placing two membranes between the anode and cathode, creating a middle chamber for water desalination between the membranes. An anion exchange membrane was placed adjacent to the anode, and a cation exchange membrane was positioned next to the cathode. When current was produced by bacteria on the anode, ionic species in the middle chamber were transferred into the two electrode chambers, desalinating the water in the middle chamber. Proof-of-concept experiments for this approach, using what we call a microbial desalination cell (MDC), was demonstrated using water at different initial salt concentrations (5, 20, and 35 g/L) with acetate used as the substrate for the bacteria. The MDC produced a maximum of 2 W/m2 (31 W/m3) while at the same time removing about 90% of the salt in a single desalination cycle. As the salt was removed from the middle chamber the ohmic resistance of the MDC (measured using electrochemical impedance spectroscopy) increased from 25 Ω to 970 Ω at the end of the cycle. This increased resistance was reflected by a continuous decrease in the voltage produced over the cycle. These results demonstrate for the first time the possibility for a new method for water desalination and power production that uses only a source of biodegradable organic matter and bacteria. © 2009 American Chemical Society.

  6. A new method for water desalination using microbial desalination cells.

    Science.gov (United States)

    Cao, Xiaoxin; Huang, Xia; Liang, Peng; Xiao, Kang; Zhou, Yingjun; Zhang, Xiaoyuan; Logan, Bruce E

    2009-09-15

    Current water desalination techniques are energy intensive and some use membranes operated at high pressures. It is shown here that water desalination can be accomplished without electrical energy input or high water pressure by using a source of organic matter as the fuel to desalinate water. A microbial fuel cell was modified by placing two membranes between the anode and cathode, creating a middle chamber for water desalination between the membranes. An anion exchange membrane was placed adjacent to the anode, and a cation exchange membrane was positioned next to the cathode. When current was produced by bacteria on the anode, ionic species in the middle chamber were transferred into the two electrode chambers, desalinating the water in the middle chamber. Proof-of-concept experiments for this approach, using what we call a microbial desalination cell (MDC), was demonstrated using water at different initial salt concentrations (5, 20, and 35 g/L) with acetate used as the substrate for the bacteria. The MDC produced a maximum of 2 W/m2 (31 W/m3) while at the same time removing about 90% of the salt in a single desalination cycle. As the salt was removed from the middle chamber the ohmic resistance of the MDC (measured using electrochemical impedance spectroscopy) increased from 25 Omega to 970 Omega at the end of the cycle. This increased resistance was reflected by a continuous decrease in the voltage produced over the cycle. These results demonstrate for the first time the possibility for a new method for water desalination and power production that uses only a source of biodegradable organic matter and bacteria.

  7. Desalination

    Science.gov (United States)

    To cope with the rising demand for fresh water, desalination of brackish groundwater and seawater is increasingly being viewed as a pragmatic option for augmenting fresh water supplies. The large scale deployment of desalination is likely to demonstrably increase electricity use,...

  8. Removal of Radionuclides from Waste Water at Fukushima Daiichi Nuclear Power Plant: Desalination and Adsorption Methods - 13126

    Energy Technology Data Exchange (ETDEWEB)

    Kani, Yuko; Kamosida, Mamoru; Watanabe, Daisuke [Hitachi Research Laboratory, Hitachi, Ltd., 7-2-1 Omika-cho, Hitachi, Ibaraki, 319-1221 (Japan); Asano, Takashi; Tamata, Shin [Hitachi Works, Hitachi-GE Nuclear Energy, Ltd. (Japan)

    2013-07-01

    Waste water containing high levels of radionuclides due to the Fukushima Daiichi Nuclear Power Plant accident, has been treated by the adsorption removal and reverse-osmosis (RO) desalination to allow water re-use for cooling the reactors. Radionuclides in the waste water are collected in the adsorbent medium and the RO concentrate (RO brine) in the water treatment system currently operated at the Fukushima Daiichi site. In this paper, we have studied the behavior of radionuclides in the presently applied RO desalination system and the removal of radionuclides in possible additional adsorption systems for the Fukushima Daiichi waste water treatment. Regarding the RO desalination system, decontamination factors (DFs) of the elements present in the waste water were obtained by lab-scale testing using an RO unit and simulated waste water with non-radioactive elements. The results of the lab-scale testing using representative elements showed that the DF for each element depended on its hydrated ionic radius: the larger the hydrated ionic radius of the element, the higher its DF is. Thus, the DF of each element in the waste water could be estimated based on its hydrated ionic radius. For the adsorption system to remove radionuclides more effectively, we studied adsorption behavior of typical elements, such as radioactive cesium and strontium, by various kinds of adsorbents using batch and column testing. We used batch testing to measure distribution coefficients (K{sub d}s) for cesium and strontium onto adsorbents under different brine concentrations that simulated waste water conditions at the Fukushima Daiichi site. For cesium adsorbents, K{sub d}s with different dependency on the brine concentration were observed based on the mechanism of cesium adsorption. As for strontium, K{sub d}s decreased as the brine concentration increased for any adsorbents which adsorbed strontium by intercalation and by ion exchange. The adsorbent titanium oxide had higher K{sub d}s and it

  9. EXPERIMENTAL RESEARCH OF THE INFLUENCE OF VARIOUS TYPES OF SOLAR COLLECTORS FOR PERFORMANCE SOLAR DESALINATION PLANT

    OpenAIRE

    Rakhmatulin I.R.

    2014-01-01

    The article discusses the possibility of using renewable energy for water purification. Results of analysis of a preferred energy source for a water purification using installed in places where fresh water shortages and a lack of electrical energy. The possibility of desalination of salt water using solar energy for regions with temperate climate. Presented desalination plant working on energy vacuum solar collectors, principles of action developed by the desalination plant. The experimental ...

  10. Reverse osmosis desalination: water sources, technology, and today's challenges.

    Science.gov (United States)

    Greenlee, Lauren F; Lawler, Desmond F; Freeman, Benny D; Marrot, Benoit; Moulin, Philippe

    2009-05-01

    Reverse osmosis membrane technology has developed over the past 40 years to a 44% share in world desalting production capacity, and an 80% share in the total number of desalination plants installed worldwide. The use of membrane desalination has increased as materials have improved and costs have decreased. Today, reverse osmosis membranes are the leading technology for new desalination installations, and they are applied to a variety of salt water resources using tailored pretreatment and membrane system design. Two distinct branches of reverse osmosis desalination have emerged: seawater reverse osmosis and brackish water reverse osmosis. Differences between the two water sources, including foulants, salinity, waste brine (concentrate) disposal options, and plant location, have created significant differences in process development, implementation, and key technical problems. Pretreatment options are similar for both types of reverse osmosis and depend on the specific components of the water source. Both brackish water and seawater reverse osmosis (RO) will continue to be used worldwide; new technology in energy recovery and renewable energy, as well as innovative plant design, will allow greater use of desalination for inland and rural communities, while providing more affordable water for large coastal cities. A wide variety of research and general information on RO desalination is available; however, a direct comparison of seawater and brackish water RO systems is necessary to highlight similarities and differences in process development. This article brings to light key parameters of an RO process and process modifications due to feed water characteristics.

  11. Water quality assessment of solar-assisted adsorption desalination cycle

    KAUST Repository

    Kim, Youngdeuk

    2014-07-01

    This study focuses on the water quality assessment (feed, product and brine) of the pilot adsorption desalination (AD) plant. Seawater from the Red Sea is used as feed to the AD plant. Water quality tests are evaluated by complying the Environmental Protection Agency (EPA) standards with major primary and secondary inorganic drinking water pollutants and other commonly tested water quality parameters. Chemical testing of desalinated water at the post desalination stage confirms the high quality of produced fresh water. Test results have shown that the adsorption desalination process is very effective in eliminating all forms of salts, as evidenced by the significant reduction of the TDS levels from approximately 40,000. ppm in feed seawater to less than 10. ppm. Test results exhibit extremely low levels of parameters which are generally abundant in feed seawater. The compositions of seawater and process related parameters such as chloride, sodium, bromide, sulfate, calcium, magnesium, and silicate in desalinated water exhibit values of less than 0.1. ppm. Reported conductivity measurements of desalinated water are comparable to distilled water conductivity levels and ranged between 2 and 6. μS/cm while TOC and TIC levels are also extremely low and its value is less than 0.5. ppm. © 2014 Elsevier B.V.

  12. Performance evaluation of reverse osmosis desalination plants for rural water supply in a developing country--a case study.

    Science.gov (United States)

    Kelkar, P S; Joshi, V A; Ansari, M H; Manivel, U

    2003-12-01

    Performance evaluation of two reverse osmosis (RO) desalination plants (DSP) at villages: Melasirupodhu (30 m3 day(-1)) and Sikkal (50 m3 day(-1)) in Ramanathpuram district, Tamil Nadu (India) were studied so as to bring out the state-of-art of their operation and maintenance (O&M). Detailed information on plant design and engineering, water quality, plant personnel, and cost of O&M was collected for a period of three years after commissioning of the two plants. Feed water was brackish, the TDS varied in the range of 6500-8500 mg L(-1) at Melasirupodhu and 5300-7100 mg L(-1) at Sikkal villages. The product water quality was observed to be gradually deteriorating as the salt rejection by the membranes decreased with time. The salt rejection was 97-99% at the time of commissioning of the plants, and came down to 89-90% at the end of 3 years of operation. Product water TDS soon after installation of the plants was excellent and within desirable limits of BIS. After three years of operation, few parameters exceeded the desirable limits, however, they were found to be within permissible limits of BIS. The analyses of the data showed that both plants were operated only at 30-36% of the design capacity. Plant shut-down due to inadequate and erratic power supply, and plant break-down and inherent delay in repairs due to lack of adequate infrastructure were found to be the major causes for the low utilization of the plants. Consequently the recurring cost of product water production enhanced to Rs. 25.0/m3 at Melasirupodhu and Rs. 17.5 m(-3) at Sikkal, as against the estimated cost of Rs. 15.0/m3 and Rs. 11.0/m3, respectively, as per the design. Over the years, the energy consumption for the product water output increased reflecting higher operational pressures needed with the aging of the membranes.

  13. Economic evaluation of the integrated SMART desalination plant

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Young Dong; Lee, Man Kye; Yeo, Ji Won; Kim, Hee Chul; Chang, Moon Hee

    2001-04-01

    In this study, an economic evaluation methodology of the integrated SMART desalination plant was established and the economic evaluation of SMART was performed. The plant economics was evaluated with electricity generation costs calculated using approximate estimates of SMART cost data and the result was compared with the result calculated using the SMART design data and estimated bulk materials. In addition, a series of sensitivity studies on the power generation cost was performed for the main economic parameters of SMART Power credit method was used for the economic analysis of the integrated SMART desalination plant. Power credit method is a widely used economic analysis method for the cogeneration plant when the major portion of the energy is used for the electricity generation. In the case of using SMART fot power generation only, the result shows that the electricity generation cost of SMART is higher than that of the alternative power options. However, it can be competitive with the other power options in the limited cases, especially with the gas fired combined plant. In addition, an economic analysis of the integrated SMART desalination plant coupled with MED was performed. The calculated water production cost is in the range of 0.56 approx. 0.88($/m{sup 3}) for the plant availability of 80% or higher, which is close to the study results presented by the various other countries. This indicates that SMART can be considered as a competitive choice for desalination among various alternative energy sources.

  14. Desalination leading to Salinity Variations in Kuwait Marine Waters

    Directory of Open Access Journals (Sweden)

    Ahmad E. Al-Dousari

    2009-01-01

    Full Text Available Problem statements: The salinity of seawater is a critical issue for desalination process. Approach: The salinity changes in the coastal waters of Kuwait due to large scale power and desalination activity were evaluated. Results: Systematic sampling campaigns were planned to cover the uptake and outfall of the desalination plant spreading evenly the sampling points to cover the freshwater input zone of Arabian Gulf in north. The salinity observations are critical both for the desalination process and for integrity of the marine environment, which is critical in case of Kuwait. Conclusion/Recommendations: The results showed compliance of Kuwait EPA salinity standard in the area with a difference of around 4 ppt salinity increase at outfall compared to uptake zone.

  15. Economics of Renewable Energy for Water Desalination in Developing Countries

    Directory of Open Access Journals (Sweden)

    Enas R. Shouman

    2015-12-01

    Full Text Available The aim of this study is to investigate the economics of renewable energy- powered desalination, as applied to water supply for remote coastal and desert communities in developing countries. In this paper, the issue of integration of desalination technologies and renewable energy from specified sources is addressed. The features of Photovoltaic (PV system combined with reverse osmosis desalination technology, which represents the most commonly applied integration between renewable energy and desalination technology, are analyzed. Further, a case study for conceptual seawater reverse osmosis (SW-RO desalination plant with 1000 m3 /d capacity is presented, based on PV and conventional generators powered with fossil fuel to be installed in a remote coastal area in Egypt, as a typical developing country. The estimated water cost for desalination with PV/ SW-RO system is about $1.25 m3 , while ranging between $1.22-1.59 for SW-RO powered with conventional generator powered with fossil fuel. Analysis of the economical, technical and environmental factors depicts the merits of using large scale integrated PV/RO system as an economically feasible water supply relying upon a renewable energy source.

  16. EXPERIMENTAL RESEARCH OF THE INFLUENCE OF VARIOUS TYPES OF SOLAR COLLECTORS FOR PERFORMANCE SOLAR DESALINATION PLANT

    Directory of Open Access Journals (Sweden)

    Rakhmatulin I.R.

    2014-04-01

    Full Text Available The article discusses the possibility of using renewable energy for water purification. Results of analysis of a preferred energy source for a water purification using installed in places where fresh water shortages and a lack of electrical energy. The possibility of desalination of salt water using solar energy for regions with temperate climate. Presented desalination plant working on energy vacuum solar collectors, principles of action developed by the desalination plant. The experimental results of a constructed distiller when working with vacuum glass tubes and vacuum tubes with copper core inside. Conclusions about the possibility of using solar collectors for water desalination, are tips and tricks to improve the performance of solar desalination plant.

  17. Solar field control for desalination plants

    Energy Technology Data Exchange (ETDEWEB)

    Roca, Lidia [Convenio Universidad de Almeria, Plataforma Solar de Almeria, Ctra. Senes s/n, 04200 Tabernas, Almeria (Spain); Berenguel, Manuel [Universidad de Almeria, Dpto. Lenguajes y Computacion, Ctra. Sacramento s/n, 04120 Almeria (Spain); Yebra, Luis; Alarcon-Padilla, Diego C. [CIEMAT, Plataforma Solar de Almeria, Ctra. Senes s/n, 04200 Tabernas, Almeria (Spain)

    2008-09-15

    This paper presents the development and application of a feedback linearization control strategy for a solar collector field supplying process heat to a multi-effect seawater distillation plant. Since one objective is to use as much as possible the solar resource, control techniques can be used to produce the maximum heat process in the solar field. The main purpose of the controller presented in this paper is to manipulate the water flow rate to maintain an outlet-inlet temperature gradient in the collectors, thereby ensuring continuous process heating, or in other words, continuous production of fresh water in spite of disturbances. The dynamic behaviour of this solar field was approximated by a simplified lumped-parameters nonlinear model based on differential equations, validated with real data and used in the feedback linearization control design. Experimental results in the seawater desalination plant at the Plataforma Solar de Almeria (Spain) show good agreement of the model and real data despite the approximations included. Moreover, by using feedback linearization control it is possible to track a constant gradient temperature reference in the solar field with good results. (author)

  18. Tracing disinfection byproducts in full-scale desalination plants

    KAUST Repository

    Le Roux, Julien

    2015-03-01

    The aim of this study was to assess the formation and the behavior of halogenated byproducts (regulated THMs and HAAs, as well as nitrogenous, brominated and iodinated DBPs including the emerging iodo-THMs) along the treatment train of full-scale desalination plants. One thermal multi-stage flash distillation (MSF) plant and two reverse osmosis (RO) plants located on the Red Sea coast of Saudi Arabia. DBPs formed during the prechlorination step were efficiently removed along the treatment processes (MSF or RO). Desalination plants fed with good seawater quality and using intermittent chlorine injection did not show high DBP formation and discharge. One RO plant with a lower raw water quality and using continuous chlorination at the intake formed more DBPs. In this plant, some non-regulated DBPs (e.g., dibromoacetonitrile and iodo-THMs) reached the product water in low concentrations (< 1.5 μg/L). Regulated THMs and HAAs were far below their maximum contamination levels set by the US Environmental Protection Agency. Substantial amounts of DBPs are disposed to the sea; low concentrations of DBPs were indeed detected in the water on shore of the desalination plants.

  19. GIS-based assessment of combined CSP electric power and seawater desalination plant for Duqum - Oman

    Energy Technology Data Exchange (ETDEWEB)

    Gastli, Adel [Department of Electrical and Computer Engineering, College of Engineering, Sultan Qaboos University, P.O. 33, Al-Khodh, Muscat-123 (Oman); Charabi, Yassine [Department of Geography, College of Arts, Sultan Qaboos University, P.O. 42, Al-Khodh, Muscat-123 (Oman); Zekri, Slim [Department of Natural Resource Economics, College of Agricultural and Marine Sciences, Sultan Qaboos University, P.O. 34, Al-Khodh, Muscat-123 (Oman)

    2010-02-15

    This paper investigates the potential of implementing combined electric power and seawater desalination plant using concentrated solar power technologies for Wilayat Duqum in Oman. Duqum is going through a considerable urban, touristic and industrial expansion and development. GIS solar radiation tools are used to select the most appropriate site for the plant location. There are basically two different options to combine concentrated solar electric power with seawater desalination. The first option is to combine a CSP plant with a thermal desalination unit, exploiting the exhaust heat of the steam cycle to drive a thermal desalination unit. The second option is to exploit only the electricity output of the CSP plant with a reverse osmosis desalination unit. The paper deals with both options and shows where each of the concepts has advantages considering local conditions: the quality of the input water, the demand of freshwater and/or potable water, social and economic aspects, the environment and others. (author)

  20. Multilayer Nanoporous Graphene Membranes for Water Desalination.

    Science.gov (United States)

    Cohen-Tanugi, David; Lin, Li-Chiang; Grossman, Jeffrey C

    2016-02-10

    While single-layer nanoporous graphene (NPG) has shown promise as a reverse osmosis (RO) desalination membrane, multilayer graphene membranes can be synthesized more economically than the single-layer material. In this work, we build upon the knowledge gained to date toward single-layer graphene to explore how multilayer NPG might serve as a RO membrane in water desalination using classical molecular dynamic simulations. We show that, while multilayer NPG exhibits similarly promising desalination properties to single-layer membranes, their separation performance can be designed by manipulating various configurational variables in the multilayer case. This work establishes an atomic-level understanding of the effects of additional NPG layers, layer separation, and pore alignment on desalination performance, providing useful guidelines for the design of multilayer NPG membranes.

  1. Identification of optimum outfall location for desalination plant in the coastal waters off Tuticorin, India

    Digital Repository Service at National Institute of Oceanography (India)

    DineshKumar, P.K.; NaveenKumar, K.R.; Muraleedharan, K.R.

    values. It is suggested that the offshore waters at a distance of 2 Km away from the coastline could be considered as optimum where the environmental impact on the ecosystem due to the disposal operations is considered to be minimum...

  2. Submerged membrane distillation for desalination of water

    KAUST Repository

    Francis, Lijo

    2016-10-27

    Submerged membrane modules for use for desalination of water are disclosed. In one or more aspects, the membrane modules can be submerged either in a feed solution tank or the feed solution can pass through the lumen side of the membrane submerged within the tank. The feed solution can be a water-based feed stream containing an amount of salt.

  3. Proposal of an Eco-Industrial Park based on the water desalination plant located inside the King Abdullah University of Science and Technology

    KAUST Repository

    Lopez Torres, Rodrigo

    2016-12-01

    This thesis project is a proposal of a scenario of an industrial collaboration that could become the basis for the development of an Eco-Industrial Park inside the King Abdullah University of Science and Technology using the water desalination plant as the foundation of this network. It is defined why the university is a suitable place for a development of this type; what industrial networks can be formed and what environmental, economic and social benefits could be achieved if the Kingdom of Saudi Arabia implemented this project around the country. An Eco-Industrial Park is a collaboration between industries where they share resources and create an exchange network of wastes and by-products with the objective of obtaining positive environmental, economic and social impacts. In the proposed scenario, the initial collaboration is between a PV solar plant and the water desalination located inside the university. With the use of solar energy there are savings of CO2 emissions, which turn into positive impacts on the environment. The idea is that this initial collaboration could be extended in the future to provide the entire energy consumption of the KAUST community. The project also provides an insight into how an industrial symbiosis could be formed taking as a base this industrial collaboration. However, further studies and analysis are required in order to provide more solid information regarding the development of an Eco-Industrial Park.

  4. Thermoeconomic Analysis and Multiobjective Optimization of a Solar Desalination Plant

    Directory of Open Access Journals (Sweden)

    Hamid Mokhtari

    2014-01-01

    Full Text Available A solar desalination plant consisting of solar parabolic collectors, steam generators, and MED unit was simulated technoeconomically and optimized using multiobjective genetic algorithm. A simulation code was developed using MATLAB language programming. Indirect steam generation using different thermal oils including THERMINOL VP1, THERMINOL66, and THERMINOL59 was also investigated. Objective function consisted of 17 essential parameters such as diameter of heat collector element, collector width, steam generator pinch, approach temperatures, and MED number of effects. Simulation results showed that THERMINOL VP1 had superior properties and produced more desalinated water than other heat transfer fluids. Performance of the plant was analyzed on four characteristic days of the year to show that multiobjective optimization technique can be used to obtain an optimized solution, in which the product flow rate increased, while total investment and O&M costs decreased compared to the base case.

  5. An evaluation of chemical, physical and biological qualities of the inlet and outlet water of desalination plants by reverse osmosis and multistage flash processes in Qeshm Island during

    Directory of Open Access Journals (Sweden)

    Doleh Mohammad

    2016-01-01

    Full Text Available Background and aim: One of the most important components of community’s health is providing clean drinking water. The aim of this study is the quality evaluation of inlet and outlet water of desalination plants in Qeshm by reverse osmosis (RO and Multistage flash (MSF processes and also to compare water quality of outlet from both of process with National and International standards of drinking water. Methods: The cross-sectional descriptive study was carried out during 7 months from November 2011 to May 2012. Sampling was carried out once every two months from inlet and outlet water of desalination plants in Qeshm by RO and MSF processes. Parameters were studied included total hardness, electrical conductivity (EC, total dissolved solid (TDS, turbidity, temperature, pH, fluoride, nitrate, nitrite, chloride, sulfate and biological parameter (total coliform, fecal coliform. Finally, analytical analysis was performed by SPSS (version 16 using paired T- test. Result: Although theresults of this study showed that total hardness and fluoride concentration in the effluent of the both of the processes (RO and MSF were lower than desirable concentration and chloride concentration in RO process was higher than allowable concentration limit, the rest of parameters (chemical and physical in both of processes were in the acceptable range. There was not observed any coliform contamination in the effluent from the both processes (RO and MSF. Conclusion: Due to low fluoride and hardness concentration in the effluent of the both processes (RO and MSF, it should be compensated by adding fluoride and calcium or magnesium compounds. More importantly, the both processes have high capability in providing safe drinking water quality according to water quality standards.

  6. Desalination of Water Using ZVI (Fe0

    Directory of Open Access Journals (Sweden)

    David D. J. Antia

    2015-07-01

    Full Text Available Batch treatment of water (0.2 to 240 L using Fe0 (44,000–77,000 nm in a diffusion environment operated (at −8 to 25 °C using: (a no external energy; (b pressurized (<0.1 MPa air; (c pressurized (<0.1 MPa acidic gas (CO2; (d pressurized (<0.1 MPa anoxic gas (N2; (e pressurized (<0.1 MPa anoxic, acidic, reducing gas (H2 + CO + CO2 + CH4 + N2, reduces the salinity of water. Desalination costs increase with increasing NaCl removal. The cost of reducing water salinity from: (i 2.65 to 1.55 g·L−1 (over 1–24 h is $0.002–$0.026 m−3; (ii 38.6 to 0.55 g·L−1 (over 210 days is $67.6–$187.2 m−3. Desalination is accompanied by the removal, from the water, of one or more of: nitrate, chloride, fluoride, sulphate, phosphate, As, B, Ba, Ca, Cd, Co, Cu, Fe, Mg, Mn, Na, Ni, P, S, Si, Sr, Zn. The rate of desalination is enhanced by increasing temperatures and increasing HCO3−/CO32− concentrations. The rate of desalination decreases with increasing SO42− removal under acidic, or pH neutral, operating conditions.

  7. Water Desalination Systems Powered by Solar Energy

    Science.gov (United States)

    Barseghyan, A.

    2015-12-01

    The supply of potable water from polluted rivers, lakes, unsafe wells, etc. is a problem of high priority. One of the most effective methods to obtain low cost drinking water is desalination. Advanced water treatment system powered by Solar Energy and based on electrodialysis for water desalination and purification, is suggested. Technological and economic evaluations and the benefits of the suggested system are discussed. The Advanced Water Treatment System proposed clears water not only from different salts, but also from some infections, thus decreasing the count of diseases which are caused by the usage of non-clear water. Using Solar Energy makes the system stand alone which is convenient to use in places where power supply is problem.

  8. Tunable water desalination across Graphene Oxide Frameworks

    Science.gov (United States)

    Nicolai, Adrien; Meunier, Vincent

    2014-03-01

    ``Water, water, everywhere, nor any drop to drink.'' wrote Samuel Taylor Coleridge in 1798. Today's scientific advances in water desalination promise to change the second part of the sentence into ``and every drop to drink,'' by transforming sea water into fresh water and quench the thirst of 1.2B people facing shortages of water. To achieve this, the design of nanoporous materials with high water permeability and coupled with high salt rejection capacity is crucial. Graphene Oxide Frameworks (GOF) materials are a class of porous materials consisting of layers of graphene oxide sheets interconnected by linear boronic acid linkers. Water desalination across GOF is studied using classical Molecular Dynamics simulations. We used quantum mechanically obtained boron-related force field parameters to study the diffusion of water molecules inside bulk GOF. Properties, such as the self-diffusion coefficient of water molecules increases linearly with linker concentration n. Further, the desalination performance of GOF membranes reveals that the water permeability of GOF is several orders of magnitude higher than conventional membranes and an high water permeability can be coupled with a 100% efficiency of salt rejection by choosing the appropriate concentration n and thickness h.

  9. Indirect economic impacts in water supplies augmented with desalinated water

    DEFF Research Database (Denmark)

    Rygaard, Martin; Arvin, Erik; Binning, Philip John

    2010-01-01

    softeners. This paper describes potential economic consequences of diluting Copenhagen's drinking water with desalinated water. With a mineral content at 50% of current levels, dental caries and cardiovascular diseases are expected to increase by 51 and 23% respectively. Meanwhile, the number of dish...... going from fresh water based to desalinated water supply. Large uncertainties prevent the current results from being used for or against desalination as an option for Copenhagen's water supply. In the future, more impacts and an uncertainty analysis will be added to the assessment....

  10. Mild desalination of various raw water streams.

    Science.gov (United States)

    Groot, C K; van den Broek, W B P; Loewenberg, J; Koeman-Stein, N; Heidekamp, M; de Schepper, W

    2015-01-01

    For chemical industries, fresh water availability is a pre-requisite for sustainable operation. However, in many delta areas around the world, fresh water is scarce. Therefore, the E4 Water project (www.e4water.eu) comprises a case study at the Dow site in Terneuzen, The Netherlands, which is designed to develop commercial applications for mild desalination of brackish raw water streams from various origins to enable reuse in industry or agriculture. This study describes an effective two-stage work process, which was used to narrow down a broad spectrum of desalination technologies to a selection of the most promising techniques for a demonstration pilot at 2-4 m³/hour. Through literature study, laboratory experiments and multi-criteria analysis, nanofiltration and electrodialysis reversal were selected, both having the potential to attain the objectives of E4Water at full scale.

  11. International overview of seawater desalination plant by reverse osmosis technology

    OpenAIRE

    Kangwen, Shu

    2012-01-01

    In a world faced with increased urbanization, population growth, climate change and degradation of water supplies, the importance of a reliable source of technology to provide fresh water emphasizes the importance of seawater desalination. Over the years a variety of seawater desalination methods have been developed throughout the world. The most common technologies available for desalination around the world are membrane reverse osmosis (RO), thermal distillation (TD) and electrodialysis ...

  12. International overview of seawater desalination plant by reverse osmosis technology

    OpenAIRE

    Kangwen, Shu

    2012-01-01

    In a world faced with increased urbanization, population growth, climate change and degradation of water supplies, the importance of a reliable source of technology to provide fresh water emphasizes the importance of seawater desalination. Over the years a variety of seawater desalination methods have been developed throughout the world. The most common technologies available for desalination around the world are membrane reverse osmosis (RO), thermal distillation (TD) and electrodialysis ...

  13. An Applied Research Program on Water Desalination with Renewable Energies

    Directory of Open Access Journals (Sweden)

    S. M. Alcocer

    2008-01-01

    Full Text Available The use of renewable energy for desalination might be quite different in many places of the world. In Mexico, specifically in Baja California, there is an abundance of “traditional” renewable resources like sun and wind but also some others like hot springs at the coast, tidal currents and tidal amplitudes of over six meters in the upper part of the Gulf of California associated with a severe scarcity of fresh water. The National University of Mexico (UNAM started two years ago a well organized research program to assess the amount of these resources and to find the way to use them for desalinating sea water. Very exiting results have being obtained: The abundance of hot springs at the shore, some of them over 84°C, lead to the design of thermal desalinating prototype plants with very little energy consumption. It was found by geochemistry that at a few meters deep, some 50 m, very high temperature can be obtained, easy to use in binary geothermal power plants to generate electricity for desalination. During the survey it was found that the amount of electrical power that can be generated with tidal storage and from deep sea hydrothermal vents is of the order of several thousands of MW. A special approach is also presented for the use of solar energy and the tidal currents of the Gulf. The IMPULSA research group at UNAM has been already consolidated with more than 30 students, dedicated to the design of appropriate equipment to make use of these resources and to characterize and quantify this huge amount of renewable energies that will permit to desalinate sea water.

  14. Subsurface intake systems: Green choice for improving feed water quality at SWRO desalination plants, Jeddah, Saudi Arabia

    KAUST Repository

    Dehwah, Abdullah H A

    2015-10-25

    An investigation of three seawater reverse osmosis facilities located along the shoreline of the Red Sea of Saudi Arabia that use well intake systems showed that the pumping-induced flow of raw seawater through a coastal aquifer significantly improves feed water quality. A comparison between the surface seawater and the discharge from the wells shows that turbidity, algae, bacteria, total organic carbon, most fractions of natural organic matter (NOM), and particulate and colloidal transparent exopolymer particles (TEP) have significant reductions in concentration. Nearly all of the algae, up to 99% of the bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of the TEP were removed during transport. The data suggest that the flowpath length and hydraulic retention time in the aquifer play the most important roles in removal of the organic matter. Since the collective concentrations of bacteria, biopolymers, and TEP in the intake seawater play important roles in the biofouling of SWRO membranes, the observed reductions suggest that the desalination facilities that use well intakes systems will have a potentially lower fouling rate compared to open-ocean intake systems. Furthermore, well intake system intakes also reduce the need for chemical usage during complex pretreatment systems required for operation of SWRO facilities using open-ocean intakes and reduce environmental impacts.

  15. Subsurface intake systems: Green choice for improving feed water quality at SWRO desalination plants, Jeddah, Saudi Arabia.

    Science.gov (United States)

    Dehwah, Abdullah H A; Missimer, Thomas M

    2016-01-01

    An investigation of three seawater reverse osmosis facilities located along the shoreline of the Red Sea of Saudi Arabia that use well intake systems showed that the pumping-induced flow of raw seawater through a coastal aquifer significantly improves feed water quality. A comparison between the surface seawater and the discharge from the wells shows that turbidity, algae, bacteria, total organic carbon, most fractions of natural organic matter (NOM), and particulate and colloidal transparent exopolymer particles (TEP) have significant reductions in concentration. Nearly all of the algae, up to 99% of the bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of the TEP were removed during transport. The data suggest that the flowpath length and hydraulic retention time in the aquifer play the most important roles in removal of the organic matter. Since the collective concentrations of bacteria, biopolymers, and TEP in the intake seawater play important roles in the biofouling of SWRO membranes, the observed reductions suggest that the desalination facilities that use well intakes systems will have a potentially lower fouling rate compared to open-ocean intake systems. Furthermore, well intake system intakes also reduce the need for chemical usage during complex pretreatment systems required for operation of SWRO facilities using open-ocean intakes and reduce environmental impacts.

  16. Potential health impacts of consuming desalinated bottled water.

    Science.gov (United States)

    Rowell, Candace; Kuiper, Nora; Shomar, Basem

    2015-06-01

    This study compared physicochemical properties, anion and carbon content and major and trace elements in desalinated and non-desalinated bottled water available in Qatar, and assessed the potential health risks associated with prolonged consumption of desalinated water. Results indicate that Qatar's population is not at elevated risk of dietary exposure to As (mean = 666 ng/L), Ba (48.0 μg/L), Be (9.27 ng/L), Cd (20.1 ng/L), Cr (874 ng/L), Pb (258 ng/L), Sb (475 ng/L) and U (533 ng/L) from consumption of both desalinated and non-desalinated bottled water types available in the country. Consumers who primarily consume desalinated water brands further minimize risk of exposure to heavy metals as levels were significantly lower than in non-desalinated bottled water. Desalinated bottled water was not a significant contributor to recommended daily intakes for Ca, Mg and F(-) for adults and children and may increase risk of deficiencies. Desalinated bottled water accounted for only 3% of the Institute of Medicine (IOM) adequate intake (AI) for Ca, 5-6% of the recommended daily allowance for Mg and 4% of the AI for F among adults. For children desalinated water contributed 2-3% of the IOM AICa, 3-10% of the RDA(Mg) and 3-9% of the AIF.

  17. Optimization of membrane stack configuration in enlarged microbial desalination cells for efficient water desalination

    Science.gov (United States)

    Chen, Xi; Sun, Haotian; Liang, Peng; Zhang, Xiaoyuan; Huang, Xia

    2016-08-01

    Microbial desalination cells are considered a low-energy-consumption, clean technology to simultaneously purify wastewater and desalinate saline water by utilizing the in situ energy source contained in wastewater. To enhance desalination performance and achieve an optimal membrane stack configuration, an enlarged stacked microbial desalination cell (SMDC) has been developed and tested with 6-14 desalination cells. The cross-membrane area of the enlarged SMDC is 100 cm2. The anode and cathode volumes are both 200 mL. To reduce internal resistance, the width of desalination cells is kept as <0.5 mm. The optimal configuration with 10 desalination cells achieves the highest total desalination rate (TDR) of 423 mg/h and the highest charge transfer efficiency (CTE) of 836% when treating the 20 g/L NaCl solution. During this process, the junction potential across membranes increases from 0 to 374 mV, and occupies up to 74% of the total potential loss inside the SMDC. This shows that the SMDC used in this work achieves the highest TDR and CTE among the reported studies, and the junction potential should be effectively controlled to achieve the desired desalination performance in future practical applications.

  18. A framework for planning sustainable seawater desalination water supply.

    Science.gov (United States)

    Shahabi, Maedeh P; McHugh, Adam; Anda, Martin; Ho, Goen

    2017-01-01

    A quantitative framework for sustainable desalination planning in metropolitan areas, which integrates the tools of mixed integer linear programming and life cycle assessment, is presented. The life cycle optimisation framework allows for optimal desalination planning by considering choices over intake type, staging and location of the infrastructure under different land-use, environmental and economic policies. Optimality is defined by the decision maker's selected objective function, being either an environmental impact or a levelised cost indicator. The framework was tested for future desalination planning scenarios in the northern metropolitan area of Perth, Western Australia. Results indicate that multi-staged construction and decentralised planning solutions may produce lower life cycle environmental impacts (58%) and at a lower levelised cost (24%) than a centralised desalination solution currently being considered by Western Australian water planners. Sensitivity analysis results suggest that the better environmental and economic performance of decentralised planning over centralised planning is highly sensitive to the proportion of land that can be made available for the siting of decentralised plants near the demand zone. Insight into land use policies is a critical factor to the initiation and success of decentralised solution in developed metropolitan areas.

  19. Performance Analysis of Thermal Vapour Compression Desalination System Coupled to Cogeneration Nuclear Power Plant

    Directory of Open Access Journals (Sweden)

    P. Asiedu-Boateng

    2012-04-01

    Full Text Available Nuclear desalination of seawater has been identified as one of the affordable means of fresh water production. However this can only be achieved by the design of energy efficient desalination systems. This study focused on cycle analysis of the cogeneration nuclear power plant. A theoretical model of the Thermo Vapour Compression (TVC desalination process was also developed and coupled to the cogeneration nuclear power plant. The modeled coupled system was developed on the computer code, NUCDES using FORTRAN language to investigate the effect of design and operating parameters on parameters controlling the cost of producing fresh water from TVC process. The results showed that the performance of the TVC desalination process and the efficiency of the cogeneration nuclear power improve with the motive steam pressure.

  20. Seawater desalination plant using nuclear heating reactor coupled with MED process

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A small size plant for seawater desalination using nuclear heating reactor coupled with MED process was developed by the Institute of Nuclear Energy Technology, Tsinghua University, China. This seawater desalination plant was designed to supply potable water demand to some coastal location or island where both fresh water and energy source are severely lacking. It is also recommended as a demonstration and training facility for seawater desalination using nuclear energy. The design of small size of seawater desalination plant couples two proven technologies: Nuclear Heating Reactor (NHR) and Multi-Effect Destination (MED) process. The NHR design possesses intrinsic and passive safety features, which was demonstrated by the experiences of the project NHR-5. The intermediate circuit and steam circuit were designed as the safety barriers between the NHR reactor and MED desalination system. Within 10~200 MWt of the power range of the heating reactor, the desalination plant could provide 8000 to 150,000 m3/d of high quality potable water. The design concept and parameters, safety features and coupling scheme are presented.

  1. Modeling and simulation of cogeneration nuclear power plant for seawater desalination

    Energy Technology Data Exchange (ETDEWEB)

    Asiedu-Boateng, P., E-mail: pierob79@yahoo.co.uk [Department of Nuclear Engineering and Material Science, School of Nuclear and Allied Sciences (SNAS), University of Ghana, P.O. Box AE1, Atomic Energy, Accra (Ghana); Akaho, E.H.K. [Department of Nuclear Engineering and Material Science, School of Nuclear and Allied Sciences (SNAS), University of Ghana, P.O. Box AE1, Atomic Energy, Accra (Ghana); Nyarko, B.J.B.; Yamoah, S. [National Nuclear Research Institute, Ghana Atomic Energy Commission, P.O. Box LG80, Legon (Ghana)

    2012-01-15

    Nuclear desalination of seawater remains a very viable option to solving the perennial fresh water shortage problem along the coast of Ghana especially as Ghana prepares to install the first nuclear power plant. There is, therefore, the need for research to be conducted into nuclear seawater desalination technology as part of the nuclear power program of Ghana so as to develop the needed human resources in Ghana. In this research, cycle analysis of the cogeneration nuclear power plant was conducted to determine its efficiency and desalination steam requirements. An analytical model of the thermo vapour compression (TVC) desalination process was also developed to investigate the effect of design and operating parameters on parameters controlling the cost of producing fresh water from TVC process. Steady state mass and energy balances as well as empirical correlations derived from experiments were used to model the TVC, which was coupled to a cogeneration nuclear power plant to supply the needed steam for the desalination. The model was developed on a computer code, using FORTRAN language. The results showed that the thermal performance of the TVC desalination process improves with the efficiency of the cogeneration nuclear power plant but decreases with increasing steam consumption rates.

  2. A desalination plant with solar and wind energy

    Science.gov (United States)

    Chen, H.; Ye, Z.; Gao, W.

    2013-12-01

    The shortage of freshwater resources has become a worldwide problem. China has a water shortage, although the total amount of water resources is the sixth in the world, the per capita water capacity is the 121th (a quarter of the world's per capita water capacity), and the United Nations considers China one of the poorest 13 countries in the world in terms of water. In order to increase the supply of fresh water, a realistic way is to make full use of China's long and narrow coastline for seawater desalination. This paper discusses a sea water desalination device, the device adopts distillation, uses the greenhouse effect principle and wind power heating principle, and the two-type start is used to solve the problem of vertical axis wind turbine self-starting. Thrust bearings are used to ensure the stability of the device, and to ensure absorbtion of wind energy and solar energy, and to collect evaporation of water to achieve desalination. The device can absorb solar and wind energy instead of input energy, so it can be used in ship, island and many kinds of environment. Due to the comprehensive utilization of wind power and solar power, the efficiency of the device is more than other passive sea water desalting plants, the initial investment and maintenance cost is lower than active sea water desalting plant. The main part of the device cannot only be used in offshore work, but can also be used in deep sea floating work, so the device can utilise deep sea energy. In order to prove the practicability of the device, the author has carried out theory of water production calculations. According to the principle of conservation of energy, the device ais bsorbing solar and wind power, except loose lost part which is used for water temperature rise and phase transition. Assume the inflow water temperature is 20 °C, outflow water temperature is 70 °C, the energy utilization is 60%, we can know that the water production quantity is 8 kg/ m2 per hour. Comparing with the

  3. Microbial desalination cells packed with ion-exchange resin to enhance water desalination rate.

    Science.gov (United States)

    Morel, Alexandre; Zuo, Kuichang; Xia, Xue; Wei, Jincheng; Luo, Xi; Liang, Peng; Huang, Xia

    2012-08-01

    A novel configuration of microbial desalination cell (MDC) packed with ion-exchange resin (R-MDC) was proposed to enhance water desalination rate. Compared with classic MDC (C-MDC), an obvious increase in desalination rate (DR) was obtained by R-MDC. With relatively low concentration (10-2 g/L NaCl) influents, the DR values of R-MDC were about 1.5-8 times those of C-MDC. Ion-exchange resins packed in the desalination chamber worked as conductor and thus counteracted the increase in ohmic resistance during treatment of low concentration salt water. Ohmic resistances of R-MDC stabilized at 3.0-4.7 Ω. By contrast, the ohmic resistances of C-MDC ranged from 5.5 to 12.7 Ω, which were 55-272% higher than those of R-MDC. Remarkable improvement in desalination rate helped improve charge efficiency for desalination in R-MDC. The results first showed the potential of R-MDC in the desalination of water with low salinity.

  4. 太阳能直接法苦咸水淡化装置研究%Study on Brackish Water Desalination Plant of Solar Direct Method

    Institute of Scientific and Technical Information of China (English)

    范辉; 冯冬艳

    2014-01-01

    In the southern mountainous area of Ningxia,the brackish water contains high salt and fluorine quantity.This experiment used the solar direct method for brackish water desalination plant,and desalination capacity factors were investigated.In addition,the bubbling method was used to strengthen the heat and mass transfer of distiller internal.The results showed that:(1) The fresh water conductivity was as low as 20 μS/cm and fluorine quantity around 0 mg/L; (2) The thickness of brackish water in distiller had a optimum value.The water yield would decline when it was greater than or less than the value; (3) Increasing the insulation measures around the device and adding the black sponge into distiller internal could extend its water production time.At the same time,the daily total productivity of the still was improved.(4) The use of the bubbling method to strengthen the heat and mass transfer of distiller internal which was observed that this method greatly improved the water production and different bubbling had different production.(5) Compared experimental production and theoretical production,it was found that theoretical analysis gave well agreement with the experiments.%宁夏南部山区苦咸水含盐量、含氟量均较高.设计了小型太阳能苦咸水淡化装置,考察其产水量的影响因素,并采用鼓泡方法对其进行内部传热传质强化.结果表明:(1)产生淡水电导率低至20 μS/cm,氟离子基本去除;(2)蒸馏器中苦咸水层厚度有适宜值,大于或小于该值产水量均有所下降;(3)装置外部增加保温措施、内部放入黑色海绵,均可延长产水时间,提高日产水量.(4)采用鼓泡强化方法很大程度上提高了产水量,不同鼓泡量对蒸馏器内部传热传质速率影响不同,从而产水量也不同.(5)将实验产水量与理论产水量进行比较,分析结果表明二者吻合较好.

  5. Constructive measures for handling submarine desalination plants. Konstruktive Massnahmen zur Handhabung submariner Entsalzungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Drude, B.C.; Klapp, E.; Peters, T.

    1978-11-23

    The erection and the periodical repair works of a submarine desalination plant are made easier by the separate construction of the main components, as such a membrane body for the desalination and the fresh water conveying device, both in pressure-proof vessels and by the light-weight construction method. Considerable membrane surfaces for the desalination by reverse osmosis are wound spirally around a collecting vessel of fresh water. The vessel is made of glass-fiber reinforced plastics or another light material. The main components are connected by sufficiently long and flexible pipes by which the handling of the parts is simplified during erection. This is particularly advantageous if several desalination aggregates are fed by one conveyor system.

  6. An Interactive Computer Tool for Teaching About Desalination and Managing Water Demand in the US

    Science.gov (United States)

    Ziolkowska, J. R.; Reyes, R.

    2016-12-01

    This paper presents an interactive tool to geospatially and temporally analyze desalination developments and trends in the US in the time span 1950-2013, its current contribution to satisfying water demands and its future potentials. The computer tool is open access and can be used by any user with Internet connection, thus facilitating interactive learning about water resources. The tool can also be used by stakeholders and policy makers for decision-making support and with designing sustainable water management strategies. Desalination technology has been acknowledged as a solution to a sustainable water demand management stemming from many sectors, including municipalities, industry, agriculture, power generation, and other users. Desalination has been applied successfully in the US and many countries around the world since 1950s. As of 2013, around 1,336 desalination plants were operating in the US alone, with a daily production capacity of 2 BGD (billion gallons per day) (GWI, 2013). Despite a steady increase in the number of new desalination plants and growing production capacity, in many regions, the costs of desalination are still prohibitive. At the same time, the technology offers a tremendous potential for `enormous supply expansion that exceeds all likely demands' (Chowdhury et al., 2013). The model and tool are based on data from Global Water Intelligence (GWI, 2013). The analysis shows that more than 90% of all the plants in the US are small-scale plants with the capacity below 4.31 MGD. Most of the plants (and especially larger plants) are located on the US East Coast, as well as in California, Texas, Oklahoma, and Florida. The models and the tool provide information about economic feasibility of potential new desalination plants based on the access to feed water, energy sources, water demand, and experiences of other plants in that region.

  7. Microfluidic desalination techniques and their potential applications

    NARCIS (Netherlands)

    Roelofs, Susan Helena; van den Berg, Albert; Odijk, Mathieu

    2015-01-01

    In this review we discuss recent developments in the emerging research field of miniaturized desalination. Traditionally desalination is performed to convert salt water into potable water and research is focused on improving performance of large-scale desalination plants. Microfluidic desalination

  8. Microfluidic desalination techniques and their potential applications

    NARCIS (Netherlands)

    Roelofs, S.H.; Berg, van den A.; Odijk, M.

    2015-01-01

    In this review we discuss recent developments in the emerging research field of miniaturized desalination. Traditionally desalination is performed to convert salt water into potable water and research is focused on improving performance of large-scale desalination plants. Microfluidic desalination o

  9. Solar Energy Water Desalination in the United States and Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Luft, W.

    1981-04-01

    Five solar energy water desalination systems are described. The systems will each deliver 6000 m3/day of desalted water from either seawater or brackish water. After the system definition study is completed in August 1981, two systems will be selected for pilot plant construction. The pilot plants will have capacities in the range of 1 00 to 400 m3/day.

  10. BELL PEPPER CULTIVATION WITH BRINE FROM BRACKISH WATER DESALINATION

    Directory of Open Access Journals (Sweden)

    CARLOS EDUARDO DE MOURA ARRUDA

    2011-01-01

    Full Text Available In desalination process, besides the potable water, highly salty and pollutant water (brine is generated, which can be used for producing crops since it is carefully monitored. In order to test this hypothesis, bell pepper plants, cv. 'Margarita', were grown in coconut fiber substrate under greenhouse and were irrigated with nutrient solutions prepared with tap water, brine from desalination plant, and its dilution with tap water at 75, 50 and 25%, giving a range of electrical conductivities of the nutrient solution (ECs of 2.6, 3.1, 6.6, 10.0 and 12.2 dS m-1 after the dilutions and fertilizers addition. Completely randomized blocks design was used with 5 treatments (salinity levels of the nutrient solutions and six replications. Leaf area, number of marketable fruit, total and marketable yield were reduced with ECs increase. The marketable yield of bell pepper 'Margarita' reduced 6.3% for each unitary increase of ECs above 2.6 dS m-1 (threshold salinity and the results suggest that in hydroponic system, the reduction of marketable yield with increasing ECs is promoted by reduction of the number of fruits per plant instead of a reduction of fruit mean weight.

  11. Provision of Desalinated Irrigation Water by the Desalination of Groundwater within a Saline Aquifer

    Directory of Open Access Journals (Sweden)

    David D. J. Antia

    2016-12-01

    Full Text Available Irrigated land accounts for 70% of global water usage and 30% of global agricultural production. Forty percent of this water is derived from groundwater. Approximately 20%–30% of the groundwater sources are saline and 20%–50% of global irrigation water is salinized. Salinization reduces crop yields and the number of crop varieties which can be grown on an arable holding. Structured ZVI (zero valent iron, Fe0 pellets desalinate water by storing the removed ions as halite (NaCl within their porosity. This allows an “Aquifer Treatment Zone” to be created within an aquifer, (penetrated by a number of wells (containing ZVI pellets. This zone is used to supply partially desalinated water directly from a saline aquifer. A modeled reconfigured aquifer producing a continuous flow (e.g., 20 m3/day, 7300 m3/a of partially desalinated irrigation water is used to illustrate the impact of porosity, permeability, aquifer heterogeneity, abstraction rate, Aquifer Treatment Zone size, aquifer thickness, optional reinjection, leakage and flow by-pass on the product water salinity. This desalination approach has no operating costs (other than abstraction costs (and ZVI regeneration and may potentially be able to deliver a continuous flow of partially desalinated water (30%–80% NaCl reduction for $0.05–0.5/m3.

  12. Integration of solar process heat into an existing thermal desalination plant in Qatar

    Science.gov (United States)

    Dieckmann, S.; Krishnamoorthy, G.; Aboumadi, M.; Pandian, Y.; Dersch, J.; Krüger, D.; Al-Rasheed, A. S.; Krüger, J.; Ottenburger, U.

    2016-05-01

    The water supply of many countries in the Middle East relies mainly on water desalination. In Qatar, the water network is completely fed with water from desalination plants. One of these power and desalination plants is located in Ras Abu Fontas, 20 km south of the capital Doha. The heat required for thermal desalination is provided by steam which is generated in waste heat recovery boilers (HRB) connected to gas turbines. Additionally, gas fired boilers or auxiliary firing in the HRBs are used in order to decouple the water generation from the electricity generation. In Ras Abu Fontas some auxiliary boilers run 24/7 because the HRB capacity does not match the demand of the desalination units. This paper contains the techno-economic analysis of two large-scale commercial solar field options, which could reduce the fuel consumption significantly. Both options employ parabolic trough technology with a nominal saturated steam output of 350 t/h at 15 bar (198°C, 240 MW). The first option uses direct steam generation without storage while the second relies on common thermal oil in combination with a molten salt thermal storage with 6 hours full-load capacity. The economic benefit of the integration of solar power depends mainly on the cost of the fossil alternative, and thus the price (respectively opportunity costs) of natural gas. At a natural gas price of 8 US-/MMBtu the internal rate of return on equity (IRR) is expected at about 5%.

  13. Desalination and Water Recycling by Air Gap Membrane Distillation

    NARCIS (Netherlands)

    Meindersma, G.W.; Guijt, C.M.; de Haan, A.B.

    2006-01-01

    Membrane distillation (MD) is an emerging technology for desalination. Membrane distillation differs from other membrane technologies in that the driving force for desalination is the difference in vapour pressure of water across the membrane, rather than total pressure. The membranes for MD are

  14. Water recycling and desalination by air gap membrane distillation

    NARCIS (Netherlands)

    Meindersma, G.W.; Guijt, C.M.; Haan, de A.B.

    2005-01-01

    Because salt and other small components are the most common compounds in wastewater from the process industry, desalination techniques are likely to be suitable as treatment processes in many cases. Although membrane distillation (MD) is a well-known technology for desalination and water treatment,

  15. Desalination and water recycling by air gap membrane distillation

    NARCIS (Netherlands)

    Meindersma, G.W.; Guijt, C.M.; Haan, de A.B.

    2006-01-01

    Membrane distillation (MD) is an emerging technology for desalination. Membrane distillation differs from other membrane technologies in that the driving force for desalination is the difference in vapour pressure of water across the membrane, rather than total pressure. The membranes for MD are hyd

  16. Feasibility study of a dedicated nuclear desalination system: Low-pressure Inherent heat sink Nuclear Desalination plant (LIND

    Directory of Open Access Journals (Sweden)

    Ho Sik Kim

    2015-04-01

    Full Text Available In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal–hydraulic and neutronic design requirements. In a thermal–hydraulic analysis using an analytical method based on the Wooton–Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 MWth and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

  17. Feasibility study of a dedicate nuclear desalination system: Low-pressure inherent heat sink nuclear desalination plant (LIND)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Sik; No, Hee Cheon; Jo, Yu Gwan; Wivisono, Andhika Feri; Park, Byung Ha; Choi, Jin Young; Lee, Jeong Ik; Jeong, Yong Hoon; Cho, Nam Zin [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2015-04-15

    In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 MW{sub th} and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

  18. Marine monitoring surveys for desalination plants-A critical review

    KAUST Repository

    Lattemann, Sabine

    2013-01-01

    Environmental impact assessment (EIA) studies are standard practice and a regulatory requirement for most new desalination projects today. However, most of the EIA studies are limited to predictive information; that is, they gather information on the project and the project\\'s environment before project implementation to make predictions about likely impacts. The EIAs may involve comprehensive studies, such as field monitoring, laboratory toxicity testing, and modeling studies. Consequently, the"surprising paucity of useful experimental data, either from laboratory tests or from field monitoring studies", which was observed by the US National Research Council in 2008, has been gradually decreasing. However, there is still a long-term research need on the site-specific effects of desalination plants after project commissioning has taken place. A main challenge of field research is the adequate design of the monitoring studies, which have to adequately distinguish the effects of the desalination project from natural processes over long periods of time. The existing monitoring studies have so far used a wide range of approaches and methods to investigate the environmental impacts of desalination plant discharges. Shortfalls are often that they are limited in scope, short-term, or localized. In essence, many studies fall short of recognizing the potentially synergetic effects of the single waste components of the discharges on marine organisms and the complexity of the potential responses by the ecosystem. While the possible risk of damage arising from the concentrate discharge to the marine environment in close proximity to the outfall is at hand, no conclusive evidence can yet be provided concerning the long-term impacts of desalination plant discharges, let alone the cumulative impacts on certain sea areas. This paper conducts a critical review of existing monitoring programs for desalination plants. Shortcomings of current practices are identified and relevant

  19. Combined desalination, water reuse, and aquifer storage and recovery to meet water supply demands in the GCC/MENA region

    KAUST Repository

    Ghaffour, Noreddine

    2013-01-01

    Desalination is no longer considered as a nonconventional resource to supply potable water in several countries, especially in the Gulf Corporation Countries (GCC) and Middle East and North Africa (MENA) region as most of the big cities rely almost 100% on desalinated water for their supply. Due to the continuous increase in water demand, more large-scale plants are expected to be constructed in the region. However, most of the large cities in these countries have very limited water storage capacity, ranging from hours to a few days only and their groundwater capacity is very limited. The growing need for fresh water has led to significant cost reduction, because of technological improvements of desalination technologies which makes it an attractive option for water supply even in countries where desalination was unthinkable in the past. In the GCC/MENA region, operating records show that water demand is relatively constant during the year, while power demand varies considerably with a high peak in the summer season. However, desalination and power plants are economically and technically efficient only if they are fully operated at close to full capacity. In addition, desalination plants are exposed to external constraints leading to unexpected shutdowns (e.g. red tides). Hybridization of different technologies, including reverse osmosis and thermal-based plants, is used to balance the power to water mismatch in the demand by using the idle power from co-generation systems during low power demand periods. This has led to consideration of storage of additional desalinated water to allow for maximum production and stability in operation. Aquifer storage and recovery (ASR) would then be a good option to store the surplus of desalinated water which could be used when water demand is high or during unexpected shutdowns of desalination plants. In addition, increased reuse of treated wastewater could bring an integrated approach to water resources management. In this

  20. The techno-economic optimization of a 100MWe CSP-desalination plant in Arandis, Namibia

    Science.gov (United States)

    Dall, Ernest P.; Hoffmann, Jaap E.

    2017-06-01

    Energy is a key factor responsible for a country's economic growth and prosperity. It is closely related to the main global challenges namely: poverty mitigation, global environmental change and food and water security [1.]. Concentrating solar power (CSP) is steadily gaining more market acceptance as the cost of electricity from CSP power plants progressively declines. The cogeneration of electricity and water is an attractive prospect for future CSP developments as the simultaneous production of power and potable water can have positive economic implications towards increasing the feasibility of CSP plant developments [2.]. The highest concentrations of direct normal irradiation are located relatively close to Western coastal and Middle-Eastern North-African regions. It is for this reason worthwhile investigating the possibility of CSP-desalination (CSP+D) plants as a future sustainable method for providing both electricity and water with significantly reduced carbon emissions and potential cost reductions. This study investigates the techno-economic feasibility of integrating a low-temperature thermal desalination plant to serve as the condenser as opposed to a conventional dry-cooled CSP plant in Arandis, Namibia. It outlines the possible benefits of the integration CSP+D in terms of overall cost of water and electricity. The high capital costs of thermal desalination heat exchangers as well as the pumping of seawater far inland is the most significant barrier in making this approach competitive against more conventional desalination methods such as reverse osmosis. The compromise between the lowest levelized cost of electricity and water depends on the sizing and the top brine temperature of the desalination plant.

  1. IRIS Reactor a Suitable Option to Provide Energy and Water Desalination for the Mexican Northwest Region

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, G.; Ramirez, R.; Gomez, C.; Viais, J.

    2004-10-03

    The Northwest region of Mexico has a deficit of potable water, along this necessity is the region growth, which requires of additional energy capacity. The IRIS reactor offers a very suitable source of energy given its modular size of 300 MWe and it can be coupled with a desalination plant to provide the potable water for human consumption, agriculture and industry. The present paper assess the water and energy requirements for the Northwest region of Mexico and how the deployment of the IRIS reactor can satisfy those necessities. The possible sites for deployment of Nuclear Reactors are considered given the seismic constraints and the closeness of the sea for external cooling. And in the other hand, the size of the desalination plant and the type of desalination process are assessed accordingly with the water deficit of the region.

  2. Rotating carbon nanotube membrane filter for water desalination

    Science.gov (United States)

    Tu, Qingsong; Yang, Qiang; Wang, Hualin; Li, Shaofan

    2016-05-01

    We have designed a porous nanofluidic desalination device, a rotating carbon nanotube membrane filter (RCNT-MF), for the reverse osmosis desalination that can turn salt water into fresh water. The concept as well as design strategy of RCNT-MF is modeled, and demonstrated by using molecular dynamics simulation. It has been shown that the RCNT-MF device may significantly improve desalination efficiency by combining the centrifugal force propelled reverse osmosis process and the porous CNT-based fine scale selective separation technology.

  3. Rotating carbon nanotube membrane filter for water desalination.

    Science.gov (United States)

    Tu, Qingsong; Yang, Qiang; Wang, Hualin; Li, Shaofan

    2016-05-18

    We have designed a porous nanofluidic desalination device, a rotating carbon nanotube membrane filter (RCNT-MF), for the reverse osmosis desalination that can turn salt water into fresh water. The concept as well as design strategy of RCNT-MF is modeled, and demonstrated by using molecular dynamics simulation. It has been shown that the RCNT-MF device may significantly improve desalination efficiency by combining the centrifugal force propelled reverse osmosis process and the porous CNT-based fine scale selective separation technology.

  4. Specific contents of the SAR for a nuclear desalination plant

    Energy Technology Data Exchange (ETDEWEB)

    Doval, A.S. [Nuclear Projects Division, INVAP S.E., S.C. de Bariloche, R.N. (Argentina)]. E-mail: doval@invap.com.ar; Nestor A. Masriera, Claudio M. Mazufri [Nuclear Projects Division, INVAP S.E., S.C. de Bariloche, R.N. (Argentina)

    2004-07-01

    Although it is widely accepted that coupling a Desalination Plant (DP) to a Nuclear Power Plant (NPP) does not pose any significant additional hazard, it must clearly be considered as a major modification of the design and, therefore, requires issuing an ad hoc version of the Facility Safety Analysis Report (SAR). Documentation is already available covering general safety aspects of nuclear desalination, including standards and applicable requirements, as well as methodologies for assessing potential exposure. In this report, a specific analysis of the main features to be considered for producing the safety analysis report of a nuclear desalination plant will be presented. For the sake of clarity, it is assumed that there is an existing SAR of the NPP and only the additional information to be included in the SAR will be considered. The scope of this additional information is extremely dependent on the desalination technology and the coupling scheme. Therefore, the kind of nuclear desalination process coupling, i.e. thermal, mechanical or electrical, must be defined as a previous task. A thorough review of the main contents of the SAR is performed in order to identify the relevant points, if any, which need to be included in every chapter coping with the coupling. The SAR chapters' content and scope are considered in accordance with IAEA guidelines. As part of the safety report, possible accidental event analysis and their consequences must be included and, therefore, the deterministic analysis of an envelope case of contamination release through the DP must be assessed. The elaboration of this safety case is analysed, and the justified scope of the models needed to quantify the contamination transport mechanisms is presented. Finally, the most commonly accepted techniques and codes, used for the deterministic safety analysis of nuclear plants and effectively applicable to nuclear desalination plants, are presented by the use of the modelling tool DESNU

  5. Using Solar Energy to Desalinate Water.

    Science.gov (United States)

    Tabor, Harry Z.

    1978-01-01

    Material presented is adapted from Desalination with Solar Energy, a paper presented before the International Symposium on Energy Sources and Development, held in Spain in 1977. Desalination systems energized by the sun, conditions governing their efficiency, and their costs are discussed. (HM)

  6. Problems of pricing fresh water obtained from a sea water desalination plant; Problemes de tarification de l'eau douce obtenue a partir d'une installation de dessalement d'eau de mer

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J. [Commissariat a l' Energie Atomique, (France). Centre d' Etudes Nucleaires

    1967-07-01

    Integrating a double-purpose desalination and electricity generating plant into a water supply system alters the conditions in which the other water and electricity sources are used, as the peak and the base load water and electricity demands have to be met at the least cost. This paper attempts to show how the problem of determining optimal water supply structures can be approached, in definite cases, but against a global economic back-ground. It becomes necessary to define the competition between classical resources and desalination plants, as these plants introduce into optimum studies new factors due to the peculiar shape of their production functions. These new factors (fixed and proportional costs structures, flow availabilities) are studied in relation to the production functions in various management cases (private monopoly, public monopoly). (author) [French] L'intervention d'une installation egalement productrice d'energie electrique dans l'alimentation en eau d'une zone modifie les conditions d'utilisation des autres ressources en eau et en electricite, compte tenu de la necessite d'assurer les pointes et la base des diagrammes de demande d'eau et d'electricite au moindre cout. Cet expose se propose de montrer comment on peut approcher le probleme de la determination des structures optimales d'approvisionnement en eau pour des cas precis, mais dans un cadre economique global, II devient en effet necessaire de situer la competition: ressources classiques/installation de dessalement; ces dernieres introduisent, dans les etudes d'optimum, des elements nouveaux dus a la forme particuliere de leurs fonctions de production. On etudie ces elements nouveaux (structures des couts fixes et des couts proportionnels, disponibilite des debits) en liaison avec les fonctions de production dans divers cas de gestion (monopole prive, monopole public). (auteur)

  7. An innovative psychometric solar-powered water desalination system

    OpenAIRE

    Shatat, Mahmood; Riffat, Saffa; Gan, Guohui

    2016-01-01

    Important advances have been made in solar water desalination technology but their wide application is restricted by relatively high capital and running costs. Until recently, solar concentrator collectors had usually been employed to distill water in compact desalination systems. Currently, it is possible to replace these collectors by the more efficient evacuated tube collectors, which are now widely available on the market at lower prices. This paper describes the results of experimental a...

  8. Tunable C2N Membrane for High Efficient Water Desalination

    OpenAIRE

    Yanmei Yang; Weifeng Li; Hongcai Zhou; Xiaoming Zhang; Mingwen Zhao

    2016-01-01

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently re...

  9. Optimizing desalinated sea water blending with other sources to meet magnesium requirements for potable and irrigation waters.

    Science.gov (United States)

    Avni, Noa; Eben-Chaime, Moshe; Oron, Gideon

    2013-05-01

    Sea water desalination provides fresh water that typically lacks minerals essential to human health and to agricultural productivity. Thus the rising proportion of desalinated sea water consumed by both the domestic and agricultural sectors constitutes a public health risk. Research on low-magnesium water irrigation showed that crops developed magnesium deficiency symptoms that could lead to plant death, and tomato yields were reduced by 10-15%. The World Health Organization (WHO) reported on a relationship between sudden cardiac death rates and magnesium intake deficits. An optimization model, developed and tested to provide recommendations for Water Distribution System (WDS) quality control in terms of meeting optimal water quality requirements, was run in computational experiments based on an actual regional WDS. The expected magnesium deficit due to the operation of a large Sea Water Desalination Plant (SWDP) was simulated, and an optimal operation policy, in which remineralization at the SWDP was combined with blending desalinated and natural water to achieve the required quality, was generated. The effects of remineralization costs and WDS physical layout on the optimal policy were examined by sensitivity analysis. As part of the sensitivity blending natural and desalinated water near the treatment plants will be feasible up to 16.2 US cents/m(3), considering all expenses. Additional chemical injection was used to meet quality criteria when blending was not feasible.

  10. Understanding transport in model water desalination membranes

    Science.gov (United States)

    Chan, Edwin

    Polyamide based thin film composites represent the the state-of-the-art nanofiltration and reverse osmosis membranes used in water desalination. The performance of these membranes is enabled by the ultrathin (~100 nm) crosslinked polyamide film in facilitating the selective transport of water over salt ions. While these materials have been refined over the last several decades, understanding the relationships between polyamide structure and membrane performance remains a challenge because of the complex and heterogeneous nature of the polyamide film. In this contribution, we present our approach to addressing this challenge by studying the transport properties of model polyamide membranes synthesized via molecular layer-by-layer (mLbL) assembly. First, we demonstrate that mLbL can successfully construct polyamide membranes with well-defined nanoscale thickness and roughness using a variety of monomer formulations. Next, we present measurement tools for characterizing the network structure and transport of these model polyamide membranes. Specifically, we used X-ray and neutron scattering techniques to characterize their structure as well as a recently-developed indentation based poromechanics approach to extrapolate their water diffusion coefficient. Finally, we illustrate how these measurements can provide insight into the original problem by linking the key polyamide network properties, i.e. water-polyamide interaction parameter and characteristic network mesh size, to the membrane performance.

  11. Application of Delphi method in site selection of desalination plants

    Directory of Open Access Journals (Sweden)

    M. Sepehr

    2017-12-01

    Full Text Available Given the reduced freshwater supplies across the world, seawater desalination is one of the appropriate methods available for producing freshwater. Selecting an optimal location is crucial in the installation of these plants owing to the environmental problems they cause. The present study was conducted to identify optimal locations for installing desalination Plants in the coastal areas of southern Iran (Hormozgan Province with application of Delphi method. To implement this technique and identify, screen and prioritize effective criteria and sub-criteria, ten experts were surveyed through questionnaires and eight criteria and 18 sub-criteria were identified. All these sub-criteria were evaluated and classified in ArcGIS into five classes as input layers. The maps were then integrated based on the modulation importance coefficient and the identified priorities using a linear Delphi model and the final map was reclassified into five categories. Environmentally sensitive areas and seawater quality were respectively the criterion and sub-criterion that received the highest importance. After combining the layers and obtaining the final map, 63 locations were identified for installing desalination plants in the coastal areas on the Persian Gulf and Oman Sea in Hormozgan Province.  At the end, 27 locations were high important and had optimal environmental conditions for establishing desalination plants. Of the 27 locations, six were located in the coastal area of the Oman Sea, one in the coastal area of the Strait of Hormuz and 20 others in the coastal area of the Persian Gulf.

  12. Emerging desalination technologies for water treatment: a critical review.

    Science.gov (United States)

    Subramani, Arun; Jacangelo, Joseph G

    2015-05-15

    In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption.

  13. Study on solar sea water desalination; Studie ueber solare Meerwasserentsalzung

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, G.K.

    1995-09-01

    The state of the art of solar sea water desalination is discussed based on the example of simple solar distillation. Reasons are given for the relatively reserved use of this technique in the past. The increasing shortage of fresh water (drinking water) due to increasing water consumption, the deforestation of (rain) forests, and increasing environmental pollution reveals the urgency of sea water desalination. However, the fossil energy sources that are needed for desalination cause a further increase in carbon dioxide emissions and aggravate the global-warming problem. This study suggests to multiply the relatively low economic efficiency and low cost efficiency of simple solar distillers by vacuum-controlled ground cooling and to operate pumps that convey sea water and distilled water by means of solar energy or solar cogeneration. Model calculations and a pilot project are recommended for a closer quantification of the data. General intercultural and socioeconomic aspects that must be considered when installing solar sea water (waste water) distillation plants, e.g. in Africa, are discussed. (orig.) [Deutsch] In dieser Studie wird der Stand der Technik der solaren Wasserentsalzung, basierend auf der einfachen solaren Destillation, untersucht sowie die Gruende fuer den bisher relativ geringen Einsatz dieser Technik erlaeutert. Die zunehmende Verknappung von Suesswasser (Trinkwasser), durch steigenden Wasserverbrauch, durch die Abholzung von (Regen)-Waeldern und durch die zunehmende Umweltverschmutzung ruecken aber die Notwendigkeit der Meerwasserentsalzung immer staerker in den Vordergrund. Der hohe Energiebedarf dafuer traegt aber bei der Verwendung von fossiler Primaerenergie zu einer weiteren Verstaerkung des CO{sub 2}-Ausstosses und damit zur weiteren Verschaerfung der Klimaproblematik bei. Deshalb wird hier nicht nur vorgeschlagen, den relativ geringen Wirkungsgrad und die relativ geringe Kosteneffizienz einfacher solarer Destillatoren durch

  14. Present status of and subjects on the industrial utilization of polymer separation membranes. Japan`s first largest sea water desalination plant by RO; Kobunshi bunrimaku no sangyo riyo no genjo to kadai. Zosui bun`ya ni okeru maku riyo

    Energy Technology Data Exchange (ETDEWEB)

    Furuichi, M. [Kurita Water Industries Ltd., Tokyo (Japan)

    1998-07-05

    The utilization in Japan and abroad is discussed of desalination methods using evaporation, reverse osmosis (RO) membranes, and electrodialysis membranes, out of various desalination techniques for seawater and others containing more salt. A new seawater desalination plant built in Okinawa, Japan, is outlined, and the future trend of Japan`s efforts for desalination is predicted. The said plant in Okinawa is the largest ever built in this country, and occupies 4th or 5th place in terms of capacity among similar facilities across the world. It was completed in April, 1997, and produces pure water at a rate of 40,000m{sup 3}/day. This plant, operating on RO, comprises eight RO membrane units each capable of 5131{sup 3}/day. The membranes are of the spiral type, consisting of Toray`s crosslinked aramid-base composite membranes and Nitto Denko`s membranes composed totally of crosslinked aromatic polyamide. The greatest of the pending tasks is to reduce the desalination cost. As for the operating cost of the desalination facility at the current stage, it costs 120-130 yen/m{sup 3} on the 40,000m{sup 3}/day scale, and the power cost occupies approximately 60% of the total operating cost. It is concluded that the consumption of electric power and chemicals per pure water produced have to be reduced. 8 refs., 5 figs., 5 tabs.

  15. Integrated experimental investigation and mathematical modeling of brackish water desalination and wastewater treatment in microbial desalination cells.

    Science.gov (United States)

    Ping, Qingyun; Huang, Zuyi; Dosoretz, Carlos; He, Zhen

    2015-06-15

    Desalination of brackish water can provide freshwater for potable use or non potable applications such as agricultural irrigation. Brackish water desalination is especially attractive to microbial desalination cells (MDCs) because of its low salinity, but this has not been well studied before. Herein, three brackish waters prepared according to the compositions of actual brackish water in three locations in Israel were examined with domestic wastewater as an electron source in a bench-scale MDC. All three brackish waters could be effectively desalinated with simultaneous wastewater treatment. The MDC achieved the highest salt removal rate of 1.2 g L(-1) d(-1) with an initial salinity of 5.9 g L(-1) and a hydraulic retention time (HRT) of 0.8 d. The desalinated brackish water could meet the irrigation standard of both salinity (450 mg L(-1) TDS) and the concentrations of major ionic species, given a sufficient HRT. The MDC also accomplished nearly 70% removal of organic compounds in wastewater with Coulombic efficiency varied between 5 and 10%. A previously developed MDC model was improved for brackish water desalination, and could well predict salinity variation and the concentrations of individual ions. The model also simulated a staged operation mode with improved desalination performance. This integrated experiment and mathematical modeling approach provides an effective method to understand the key factors in brackish water desalination by MDCs towards further system development.

  16. Exploiting interfacial water properties for desalination and purification applications.

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Hongwu (Los Alamos National Laboratory, Los Alamos, NM); Varma, Sameer; Nyman, May Devan; Alam, Todd Michael; Thuermer, Konrad; Holland, Gregory P.; Leung, Kevin; Liu, Nanguo (University of New Mexico Albuquerque, NM); Xomeritakis, George K. (University of New Mexico Albuquerque, NM); Frankamp, Benjamin L.; Siepmann, J. Ilja (University of Minnesota, Minneapolis, MN); Cygan, Randall Timothy; Hartl, Monika A. (Los Alamos National Laboratory, Los Alamos, NM); Travesset, Alex (Iowa State University, Ames, IA); Anderson, Joshua A. (Iowa State University, Ames, IA); Huber, Dale L.; Kissel, David J. (University of New Mexico Albuquerque, NM); Bunker, Bruce Conrad; Lorenz, Christian Douglas; Major, Ryan C. (University of Minnesota, Minneapolis, MN); McGrath, Matthew J. (University of Minnesota, Minneapolis, MN); Farrow, Darcie; Cecchi, Joseph L. (University of New Mexico Albuquerque, NM); van Swol, Frank B.; Singh, Seema; Rempe, Susan B.; Brinker, C. Jeffrey; Clawson, Jacalyn S.; Feibelman, Peter Julian; Houston, Jack E.; Crozier, Paul Stewart; Criscenti, Louise Jacqueline; Chen, Zhu (University of New Mexico Albuquerque, NM); Zhu, Xiaoyang (University of Minnesota, Minneapolis, MN); Dunphy, Darren Robert (University of New Mexico Albuquerque, NM); Orendorff, Christopher J.; Pless, Jason D.; Daemen, Luke L. (Los Alamos National Laboratory, Los Alamos, NM); Gerung, Henry (University of New Mexico Albuquerque, NM); Ockwig, Nathan W.; Nenoff, Tina Maria; Jiang, Ying-Bing; Stevens, Mark Jackson

    2008-09-01

    A molecular-scale interpretation of interfacial processes is often downplayed in the analysis of traditional water treatment methods. However, such an approach is critical for the development of enhanced performance in traditional desalination and water treatments. Water confined between surfaces, within channels, or in pores is ubiquitous in technology and nature. Its physical and chemical properties in such environments are unpredictably different from bulk water. As a result, advances in water desalination and purification methods may be accomplished through an improved analysis of water behavior in these challenging environments using state-of-the-art microscopy, spectroscopy, experimental, and computational methods.

  17. Complex admixtures of clathrate hydrates in a water desalination method

    Science.gov (United States)

    Simmons, Blake A.; Bradshaw, Robert W.; Dedrick, Daniel E.; Anderson, David W.

    2009-07-14

    Disclosed is a method that achieves water desalination by utilizing and optimizing clathrate hydrate phenomena. Clathrate hydrates are crystalline compounds of gas and water that desalinate water by excluding salt molecules during crystallization. Contacting a hydrate forming gaseous species with water will spontaneously form hydrates at specific temperatures and pressures through the extraction of water molecules from the bulk phase followed by crystallite nucleation. Subsequent dissociation of pure hydrates yields fresh water and, if operated correctly, allows the hydrate-forming gas to be efficiently recycled into the process stream.

  18. Solar and wind opportunities for water desalination in the Arab regions

    Energy Technology Data Exchange (ETDEWEB)

    Al-Karaghouli, Ali; Renne, David; Kazmerski, Lawrence L. [National Renewable Energy Laboratory, Golden, CO 80401 (United States)

    2009-12-15

    Despite the abundance of renewable energy resources in the Arab region, the use of solar thermal, solar photovoltaics, and wind is still in its technological and economic infancy. Great potential exists, but economic constraints have impeded more rapid growth for many applications. These technologies have certainly advanced technically over the last quarter century to the point where they should now be considered clean-energy alternatives to fossil fuels. For the Arab countries and many other regions of the world, potable water is becoming as critical a commodity as electricity. As renewable energy technologies advance and environmental concerns rise, these technologies are becoming more interesting partners for powering water desalination projects. We evaluate the current potential and viability of solar and wind, emphasizing the strict mandate for accurate, reliable site-specific resource data. Water desalination can be achieved through either thermal energy (using phase-change processes) or electricity (driving membrane processes), and these sources are best matched to the particular desalination technology. Desalination using solar thermal can be accomplished by multistage flash distillation, multi-effect distillation, vapor compression, freeze separation, and solar still methods. Concentrating solar power offers the best match to large-scale plants that require both high-temperature fluids and electricity. Solar and wind electricity can be effective energy sources for reverse osmosis, electrodialysis, and ultra- and nano-filtration. All these water desalination processes have special operational and high energy requirements that put additional requisites on the use of solar and wind to power these applications. We summarize the characteristics of the various desalination technologies. The effective match of solar thermal, solar photovoltaics, and wind to each of these is discussed in detail. An economic analysis is provided that incorporates energy consumption

  19. DESALINATION AND WATER TREATMENT RESEARCH AT SANDIA NATIONAL LABORATORIES.

    Energy Technology Data Exchange (ETDEWEB)

    Rigali, Mark J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, James E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Altman, Susan J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Biedermann, Laura [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brady, Patrick Vane. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kuzio, Stephanie P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nenoff, Tina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rempe, Susan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-11-01

    Water is the backbone of our economy - safe and adequate supplies of water are vital for agriculture, industry, recreation, and human consumption. While our supply of water today is largely safe and adequate, we as a nation face increasing water supply challenges in the form of extended droughts, demand growth due to population increase, more stringent health-based regulation, and competing demands from a variety of users. To meet these challenges in the coming decades, water treatment technologies, including desalination, will contribute substantially to ensuring a safe, sustainable, affordable, and adequate water supply for the United States. This overview documents Sandia National Laboratories' (SNL, or Sandia) Water Treatment Program which focused on the development and demonstration of advanced water purification technologies as part of the larger Sandia Water Initiative. Projects under the Water Treatment Program include: (1) the development of desalination research roadmaps (2) our efforts to accelerate the commercialization of new desalination and water treatment technologies (known as the 'Jump-Start Program),' (3) long range (high risk, early stage) desalination research (known as the 'Long Range Research Program'), (4) treatment research projects under the Joint Water Reuse & Desalination Task Force, (5) the Arsenic Water Technology Partnership Program, (6) water treatment projects funded under the New Mexico Small Business Administration, (7) water treatment projects for the National Energy Technology Laboratory (NETL) and the National Renewable Energy Laboratory (NREL), (8) Sandia- developed contaminant-selective treatment technologies, and finally (9) current Laboratory Directed Research and Development (LDRD) funded desalination projects.

  20. Strategies for merging microbial fuel cell technologies in water desalination processes: Start-up protocol and desalination efficiency assessment

    Science.gov (United States)

    Borjas, Zulema; Esteve-Núñez, Abraham; Ortiz, Juan Manuel

    2017-07-01

    Microbial Desalination Cells constitute an innovative technology where microbial fuel cell and electrodialysis merge in the same device for obtaining fresh water from saline water with no energy-associated cost for the user. In this work, an anodic biofilm of the electroactive bacteria Geobacter sulfurreducens was able to efficiently convert the acetate present in synthetic waste water into electric current (j = 0.32 mA cm-2) able to desalinate water. .Moreover, we implemented an efficient start-up protocol where desalination up to 90% occurred in a desalination cycle (water production:0.308 L m-2 h-1, initial salinity: 9 mS cm-1, final salinity: treatment method combined with other well established desalination technologies such as reverse osmosis (RO) or reverse electrodialysis.

  1. Planning and Design of Seawater Reverse Osmosis Desalination Plants Marine Outfalls

    Science.gov (United States)

    Maalouf, S.; Yeh, W. W.

    2011-12-01

    Increasing demands for water in urban areas and agricultural zones in arid and semi-arid regions have urged planners and regulators to look for alternative renewable water sources. Worldwide, seawater reverse osmosis (SWRO) desalination plants have become an essential supply source for the production of fresh water in such regions. Disposal of their wastes, however, has not been fully and properly addressed. This study presents a strategy for the analysis and design of optimal disposal systems of hypersaline wastes that are generated by SWRO desalination plants. The study evaluates current disposal methods and recommends ways to effectively employ multiport marine outfalls for this purpose. Such outfalls emerged as reliable means for conveying wastes from process plants, to include wastewater treatment and power plants, into the coastal waters. Their proper use, however, in conjunction with SWRO desalination plants is still in its beginning stage, and much work needs to be done to employ them effectively. Therefore, the main objective of this research is to provide design engineers with effective procedures that meet environmental permitting requirements and restrictions, while ascertaining adequate hydrodynamic performance. The study is tested by employing a simulation model and examining its reliability under many parameter perturbation scenarios. This is further extended by providing a solution to the same problem using a heuristic approach.

  2. Desalination is possible. New plant engeneerings; Dissalare e' possibile. Le novita' impiantistiche

    Energy Technology Data Exchange (ETDEWEB)

    Salemi, G. [Palermo Univ., Palermo (Italy). Facolta' di Ingegneria, Dipt. di Energetica ed Applicazioni di Fisica

    1999-12-01

    This article analyses salt water desalination state-of-art in the world. It also deals with new plant engineering trends, particularly with multifunctional combined plants which seem to represent the new frontier from an energy saving point of view. This work also analyses the various planning parameters coming into play in the different desalination plants, as well as the problems related to chemical treatment of both supply and resulting waters. [Italian] In questo articolo viene analizzato lo stato dell'arte della dissalazione di acqua marina nel mondo. Si parla anche delle nuove tendenze impiantistiche, con particolare agli impianti combinati multifunzionali che sembrano essere la nuova frontiera dal punto di vista del risparmio energetico. Nel presente lavoro vengono inoltre analizzati i diversi parametri progettuali che entrano in gioco nei diversi impianti di dissalazione, e i problemi connessi con il trattamento chimico sia delle acque di alimentazione che di quelle ottenute.

  3. Energy-water-environment nexus underpinning future desalination sustainability

    KAUST Repository

    Shahzad, Muhammad Wakil

    2017-03-11

    Energy-water-environment nexus is very important to attain COP21 goal, maintaining environment temperature increase below 2°C, but unfortunately two third share of CO2 emission has already been used and the remaining will be exhausted by 2050. A number of technological developments in power and desalination sectors improved their efficiencies to save energy and carbon emission but still they are operating at 35% and 10% of their thermodynamic limits. Research in desalination processes contributing to fuel World population for their improved living standard and to reduce specific energy consumption and to protect environment. Recently developed highly efficient nature-inspired membranes (aquaporin & graphene) and trend in thermally driven cycle\\'s hybridization could potentially lower then energy requirement for water purification. This paper presents a state of art review on energy, water and environment interconnection and future energy efficient desalination possibilities to save energy and protect environment.

  4. Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability

    KAUST Repository

    Ghaffour, Noreddine

    2013-01-01

    Desalination capacity has rapidly increased in the last decade because of the increase in water demand and a significant reduction in desalination cost as a result of significant technological advances, especially in the reverse osmosis process. The cost of desalinated seawater has fallen below US$0.50/m3 for a large scale seawater reverse osmosis plant at a specific location and conditions while in other locations the cost is 50% higher (US$1.00/m3) for a similar facility. In addition to capital and operating costs, other parameters such as local incentives or subsidies may also contribute to the large difference in desalted water cost between regions and facilities. Plant suppliers and consultants have their own cost calculation methodologies, but they are confidential and provide water costs with different accuracies. The few existing costing methodologies and software packages such as WTCost© and DEEP provide an estimated cost with different accuracies and their applications are limited to specific conditions. Most of the available cost estimation tools are of the black box type, which provide few details concerning the parameters and methodologies applied for local conditions. Many desalination plants built recently have greater desalinated water delivery costs caused by special circumstances, such as plant remediation or upgrades, local variation in energy costs, and site-specific issues in raw materials costs (e.g., tariffs and transportation). Therefore, the availability of a more transparent and unique methodology for estimating the cost will help in selecting an appropriate desalination technology suitable for specific locations with consideration of all the parameters influencing the cost. A techno-economic evaluation and review of the costing aspects and the main parameters influencing the total water cost produced by different desalination technologies are herein presented in detail. Some recent developments, such as the increase of unit capacity

  5. Water Desalination Using Capacitive Deionization with Microporous Carbon Electrodes

    NARCIS (Netherlands)

    Porada, S.; Weinstein, L.; Dash, R.; Wal, van der A.F.; Bryjak, M.; Gogotsi, Y.; Biesheuvel, P.M.

    2012-01-01

    Capacitive deionization (CDI) is a water desalination technology in which salt ions are removed from brackish water by flowing through a spacer channel with porous electrodes on each side. Upon applying a voltage difference between the two electrodes, cations move to and are accumulated in electrost

  6. ZVI (Fe0 Desalination: Stability of Product Water

    Directory of Open Access Journals (Sweden)

    David D. J. Antia

    2016-03-01

    Full Text Available A batch-operated ZVI (zero valent iron desalination reactor will be able to partially desalinate water. This water can be stored in an impoundment, reservoir or tank, prior to use for irrigation. Commercial development of this technology requires assurance that the partially-desalinated product water will not resalinate, while it is in storage. This study has used direct ion analyses to confirm that the product water from a gas-pressured ZVI desalination reactor maintains a stable salinity in storage over a period of 1–2.5 years. Two-point-three-litre samples of the feed water (2–10.68 g (Na+ + Cl−·L−1 and product water (0.1–5.02 g (Na+ + Cl−·L−1 from 21 trials were placed in storage at ambient (non-isothermal temperatures (which fluctuated between −10 and 25 °C, for a period of 1–2.5 years. The ion concentrations (Na+ and Cl− of the stored feed water and product water were then reanalysed. The ion analyses of the stored water samples demonstrated: (i that the product water salinity (Na+ and Cl− remains unchanged in storage; and (ii the Na:Cl molar ratios can be lower in the product water than the feed water. The significance of the results is discussed in terms of the various potential desalination routes. These trial data are supplemented with the results from 122 trials to demonstrate that: (i reactivity does not decline with successive batches; (ii the process is catalytic; and (iii the process involves a number of steps.

  7. Augmenting water supply by combined desalination/water recycling methods: an economic assessment.

    Science.gov (United States)

    Teusner, Adam; Blandin, Gaetan; Le-Clech, Pierre

    2017-02-01

    Dry coastal communities increasingly need to consider non-traditional methods of augmenting their water supply. This study presents a preliminary economic comparison of three alternatives for increasing the water supply by 50% for a hypothetical baseline coastal scenario: increasing desalination (Scenario A), direct potable water reuse (DPWR) (Scenario B), and a novel retrofitted configuration of a hybrid forward osmosis-reverse osmosis (FO-RO) plant (Scenario C). The latter used the dilution of the seawater feed to increase the recovery and overall output water of the original RO step. To account for the time value of money, levelised cost (LC) was used as the primary economic metric. The hybrid FO-RO configuration had a comparable LC to DPWR (0.59 vs. 0.61 $ m(-3)) and was 12% cheaper than desalination (0.67 $ m(-3)). Furthermore, hybrid FO-RO was 7% more energy efficient than conventional desalination due to reduced intake and pretreatment flows. Sensitivity analyses demonstrated that incremental reductions in LC were possible for increased FO membrane flux, including in pressure-assisted osmosis scenarios with applied pressure ranging from 2 to 6 bar. These findings validate the examination of hybrid FO-RO configurations that deviate from the energy-reduction paradigms typically studied.

  8. Review of nuclear electricity generation and desalination plants and evaluation of SMART application

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Han Ok; Kang, Hyung Suk; Cho, Bong Hyun; Yoon, Ju Hyeon; Kim, Hwan Yeol; Lee, Young Jin; Kim, Joo Pyung; Lee, Doo Jeong; Chang, Moon Hee

    1998-03-01

    KAERI are developing a new advanced integral reactor named SMART for dual application purpose of the electric power generation and seawater desalination. This report are describing the general desalting methods with its technology development and the coupling schemes between electricity generation system and desalting system. Though MSF takes the most part of currently operating seawater desalination plants, MED and RO has been preferred in the past decade. MED has a advantage over MSF with the view to investment costs and energy efficiency. The coupling between electricity generation system and desalination system can be realized by using one of back pressure cycle, extraction cycle, and multi-shaft cycle. New design and operating strategy has to be established for various environment and load conditions. To evaluate the candidate desalination systems of SMART and the coupling method of it with other secondary systems, the desalted water and electricity were calculated through the several options. The result shows that back pressure cycle is preferred at the high water/power ratio and extraction cycle at the low value. If energy efficiency are only considered, RO will be best choice. (author). 17 refs., 12 tabs., 31 figs

  9. Adsorption characteristics of water vapor on ferroaluminophosphate for desalination cycle

    KAUST Repository

    Kim, Youngdeuk

    2014-07-01

    The adsorption characteristics of microporous ferroaluminophosphate adsorbent (FAM-Z01, Mitsubishi Plastics) are evaluated for possible application in adsorption desalination and cooling (AD) cycles. A particular interest is its water vapor uptake behavior at assorted adsorption temperatures and pressures whilst comparing them to the commercial silica gels of AD plants. The surface characteristics are first carried out using N2 gas adsorption followed by the water vapor uptake analysis for temperature ranging from 20°C to 80°C. We propose a hybrid isotherm model, composing of the Henry and the Sips isotherms, which can be integrated to satisfactorily fit the experimental data of water adsorption on the FAM-Z01. The hybrid model is selected to fit the unusual isotherm shapes, that is, a low adsorption in the initial section and followed by a rapid vapor uptake leading to a likely micropore volume filling by hydrogen bonding and cooperative interaction in micropores. It is shown that the equilibrium adsorption capacity of FAM-Z01 can be up to 5 folds higher than that of conventional silica gels. Owing to the quantum increase in the adsorbate uptake, the FAM-Z01 has the potential to significantly reduce the footprint of an existing AD plant for the same output capacity. © 2014 Elsevier B.V.

  10. Design of a process for supercritical water desalination with zero liquid discharge

    NARCIS (Netherlands)

    Odu, Samuel Obarinu; van der Ham, Aloysius G.J.; Metz, S.; Kersten, Sascha R.A.

    2015-01-01

    Conventional desalination methods have a major drawback; the production of a liquid waste stream which must be disposed. The treatment of this waste stream has always presented technical, economic, and environmental challenges. The supercritical water desalination (SCWD) process meets these

  11. Minimizing the Environmental Impact of Sea Brine Disposal by Coupling Desalination Plants with Solar Saltworks: A Case Study for Greece

    Directory of Open Access Journals (Sweden)

    Stylianos Gialis

    2010-02-01

    Full Text Available The explosive increase in world population, along with the fast socio-economic development, have led to an increased water demand, making water shortage one of the greatest problems of modern society. Countries such as Greece, Saudi Arabia and Tunisia face serious water shortage issues and have resorted to solutions such as transporting water by ships from the mainland to islands, a practice that is expensive, energy-intensive and unsustainable. Desalination of sea-water is suitable for supplying arid regions with potable water, but extensive brine discharge may affect marine biota. To avoid this impact, we explore the option of directing the desalination effluent to a solar saltworks for brine concentration and salt production, in order to achieve a zero discharge desalination plant. In this context, we conducted a survey in order to evaluate the potential of transferring desalination brine to solar saltworks, so that its disposal to the sea is avoided. Our analysis showed that brine transfer by trucks is prohibitively expensive. In order to make the zero discharge desalination plant economically feasible, efforts should be directed into developing a more efficient technology that will result in the production of only a fraction of the brine that is produced from our systems today.

  12. Desalinated water hygiene and scientific bases for its investigation.

    Science.gov (United States)

    Sidorenko, G I; Rakhmanin YuA

    1978-01-01

    In view of the increasing scarcity of fresh water reserves in many countries of the world, a thorough hygienic evaluation of the different methods of desalinating highly mineralized underground and sea waters for economic and drinking purpose becomes indispensable. In addition to generally accepted hygienic criteria (favourable organoleptic properties, innocuous chemical composition and epidemiological safety), introduction of supplementary criteria for the assessment of the characteristic of the quality of freshened drinking water is necessary, i.e., its full value in the physiological sense and stability of drinking properties. The necessity of hygienic tests concerned with the study and regulation of the mineral and microelement composition of desalinated drinking water as well as of its microbial composition, structural peculiarities, the so-called "deuterium number" and the presence of various organic substances in desalinated water was pointed out. A certain degree of priority should be given to the study of the mentioned indices in hygienic assessment of the different methods of water desalination (distillation, freezing out, ion exchange, electrodialysis, inverse osmosis and others).

  13. A review of environmental governance and its effects on concentrate discharge from desalination plants in the Kingdom of Saudi Arabia

    KAUST Repository

    Van Der Merwe, Riaan

    2013-01-01

    The most likely environmental impact of concentrate discharges (in most instances twice the concentration of the ambient environment) leaking from desalination plants on local marine ecosystems has been controversially discussed for many years. Increasing water demand and lack of renewable natural water resources in Saudi Arabia also result in greater dependence on desalination and consequently amplify the impact on marine environment and multifactorial ecosystems in near-field areas of desalination discharges. Accurate scientific baseline data should furnish information on various factors such as intake- and outfall locality, brine (concentrate) discharge and chemical characteristics (i.e. effluent concentration, mass flow rates (flux)), local effects, and even cumulative effects of desalination activities, at least on a regional and even on a national scale. Even if such data were available, in many cases they are non-transparent and are not even accessible, or tend to be overlooked as a result of ambiguous desalination-related policies. This paper focuses on national environmental regulations in the Kingdom of Saudi Arabia (KSA) and how such regulations help control the flow of concentrate discharge into the receiving waters. © 2013 Desalination Publications.

  14. Impacts of desalination plant discharges on the marine environment: A critical review of published studies.

    Science.gov (United States)

    Roberts, David A; Johnston, Emma L; Knott, Nathan A

    2010-10-01

    Desalination of seawater is an increasingly common means by which nations satisfy demand for water. Desalination has a long history in the Middle East and Mediterranean, but expanding capacities can be found in the United States, Europe and Australia. There is therefore increasing global interest in understanding the environmental impacts of desalination plants and their discharges on the marine environment. Here we review environmental, ecological and toxicological research in this arena including monitoring and assessment of water quality and ecological attributes in receiving environments. The greatest environmental and ecological impacts have occurred around older multi-stage flash (MSF) plants discharging to water bodies with little flushing. These discharge scenarios can lead to substantial increases in salinity and temperature, and the accumulation of metals, hydrocarbons and toxic anti-fouling compounds in receiving waters. Experiments in the field and laboratory clearly demonstrate the potential for acute and chronic toxicity, and small-scale alterations to community structure following exposures to environmentally realistic concentrations of desalination brines. A clear consensus across many of the reviewed articles is that discharge site selection is the primary factor that determines the extent of ecological impacts of desalination plants. Ecological monitoring studies have found variable effects ranging from no significant impacts to benthic communities, through to widespread alterations to community structure in seagrass, coral reef and soft-sediment ecosystems when discharges are released to poorly flushed environments. In most other cases environmental effects appear to be limited to within 10s of meters of outfalls. It must be noted that a large proportion of the published work is descriptive and provides little quantitative data that we could assess independently. Many of the monitoring studies lacked sufficient detail with respect to study design

  15. Mathematical model of dynamic behavior of microbial desalination cells for simultaneous wastewater treatment and water desalination.

    Science.gov (United States)

    Ping, Qingyun; Zhang, Chenyao; Chen, Xueer; Zhang, Bo; Huang, Zuyi; He, Zhen

    2014-11-04

    Microbial desalination cells (MDCs) are an emerging concept for simultaneous wastewater treatment and water desalination. This work presents a mathematical model to simulate dynamic behavior of MDCs for the first time through evaluating multiple factors such as organic supply, salt loading, and current generation. Ordinary differential equations were applied to describe the substrate as well as bacterial concentrations in the anode compartment. Local sensitivity analysis was employed to select model parameters that needed to be re-estimated from the previous studies. This model was validated by experimental data from both a bench- and a large-scale MDC system. It could fit current generation fairly well and simulate the change of salt concentration. It was able to predict the response of the MDC with time under various conditions, and also provide information for analyzing the effects of different operating conditions. Furthermore, optimal operating conditions for the MDC used in this study were estimated to have an acetate flow rate of 0.8 mL·min(-1), influent salt concentration of 15 g·L(-1) and salt solution flow rate of 0.04 mL·min(-1), and to be operated with an external resistor less than 30 Ω. The MDC model will be helpful with determining operational parameters to achieve optimal desalination in MDCs.

  16. Water monitoring as a safety feature for nuclear desalination

    Energy Technology Data Exchange (ETDEWEB)

    Masriera, N.A. [Nuclear Engineering Department, INVAP, Bariloche, Rio Negro (Argentina)]. E-mail: masriera@invap.com.ar; Doval, A.S.; Di Tada, M.L. [Nuclear Engineering Department, INVAP, Bariloche, Rio Negro (Argentina)

    2006-07-01

    It is widely accepted that the general safety approach for nuclear facilities is valid for a Nuclear Desalination Plant (NDP), thus IAEA standards and guides are applicable. The coupling of a NDP should be designed with the safety objective of ensuring that it results in no adverse effect on the Nuclear Power Plant (NPP) safety. The first objective (provisions of barriers) is complied with by the known NDP design, so the relevant issue becomes the design features preventing the transfer of radioactive material to the product water, even in the event of system failures. This presentation drafts a coupling-system safety assessment, from fundamentals and general requirements down to specific design requirements. The state of the art of monitoring systems imposes constraints on the coupling design, in terms of hold-up capability and piping interconnection. This conceptual design shows the system's complexity implied in having monitoring of product water as a safety feature, and conclusions are extremely relevant when drafting general user requirements for a NDP project. (author)

  17. Irrigation with desalinated water: A step toward increasing water saving and crop yields

    Science.gov (United States)

    Silber, Avner; Israeli, Yair; Elingold, Idan; Levi, Menashe; Levkovitch, Irit; Russo, David; Assouline, Shmuel

    2015-01-01

    We examined the impact of two different approaches to managing irrigation water salinity: salt leaching from the field ("conventional" management) and water desalination before field application ("alternative" management). Freshwater commonly used for irrigation (FW) and desalinated water (DS) were applied to the high-water-demanding crop banana at four different rates. Both irrigation rate and water salinity significantly affected yield. DS application consistently produced higher yields than FW, independently of irrigation rate. The highest yield for FW-irrigation was achieved with the highest irrigation rate, whereas the same yield was obtained in the case of DS-irrigation with practically half the amount of water. Yield decreased with FW-irrigation, even when the water salinity, ECi, was lower than the limit considered safe for soil and crops. Irrigating with FW provided a massive amount of salt which accumulated in the rhizosphere, inducing increased osmotic potential of the soil solution and impairing plant water uptake. Furthermore, applying the "conventional" management, a significant amount of salt is leached from the rhizosphere, accumulating in deeper soil layers, and eventually reaching groundwater reservoirs, thus contributing to the deterioration of both soil and water quality. Removal of salt excess from the water before it reaches the field by means of DS-irrigation may save significant amounts of irrigation water by reducing the salt leaching requirements while increasing yield and improving fruit quality, and decreasing salt load in the groundwater.

  18. Knowledge, attitudes and practice of desalinated water among professionals in health and water departments in Shengsi, China: a qualitative study.

    Science.gov (United States)

    Chen, Tao; Wang, Qiqi; Qin, Yu; Chen, Xi; Yang, Xiaoxiong; Lou, Wei; Zhou, Mikang; He, Guangxue; Lu, Kai

    2015-01-01

    Desalination has been considered as an essential way to solve water stress all over the world. Most of previous studies focused on its environmental impacts, energy consumption and desalination technologies rather than human health. However, the safety of desalinated water remains unclear. This study was undertaken to investigate the knowledge, attitude and practice (KAP) of the residents in an island county in eastern China to desalinated water. Seventeen people working in medical and water industries were recruited, and focus group discussion and in-depth interview were conducted among them. Our results showed that the majority of people interviewed knew the definition and local supply pattern of desalinated water, while some of them showed some concern about the safety and nutrition of desalinated water. Current drinking water standard has no specific item for desalination, so we strongly suggest issuing a standard for desalinated water.

  19. Knowledge, attitudes and practice of desalinated water among professionals in health and water departments in Shengsi, China: a qualitative study.

    Directory of Open Access Journals (Sweden)

    Tao Chen

    Full Text Available Desalination has been considered as an essential way to solve water stress all over the world. Most of previous studies focused on its environmental impacts, energy consumption and desalination technologies rather than human health. However, the safety of desalinated water remains unclear. This study was undertaken to investigate the knowledge, attitude and practice (KAP of the residents in an island county in eastern China to desalinated water. Seventeen people working in medical and water industries were recruited, and focus group discussion and in-depth interview were conducted among them. Our results showed that the majority of people interviewed knew the definition and local supply pattern of desalinated water, while some of them showed some concern about the safety and nutrition of desalinated water. Current drinking water standard has no specific item for desalination, so we strongly suggest issuing a standard for desalinated water.

  20. Electric power and desalinated water co-production from Sulcis coal gasification project - Sardinia, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Manca, E.; Utzeri, B.; Figus, M. (IST Engineers and Contractors, Cagliari (Italy))

    1991-01-01

    Because of environmental constraints, coal gasification is the only process which can be used to process Sulcis coal. Pilot plant IGCC tests have shown that high carbon conversion rates are possible, minimum emissions are achievable, and chemically and physically inert slag can be produced. Studies have also been undertaken of a co-production plant with the capability of recovering the discharged thermal energy into water cooling condensers feeding a desalination plant for production of industrial water from sea water. 1 fig., 4 tabs.

  1. Knowledge, Attitudes and Practice of Desalinated Water among Professionals in Health and Water Departments in Shengsi, China: A Qualitative Study

    OpenAIRE

    Tao Chen; Qiqi Wang; Yu Qin; Xi Chen; Xiaoxiong Yang; Wei Lou; Mikang Zhou; Guangxue He; Kai Lu

    2015-01-01

    Desalination has been considered as an essential way to solve water stress all over the world. Most of previous studies focused on its environmental impacts, energy consumption and desalination technologies rather than human health. However, the safety of desalinated water remains unclear. This study was undertaken to investigate the knowledge, attitude and practice (KAP) of the residents in an island county in eastern China to desalinated water. Seventeen people working in medical and water ...

  2. Impact of seawater-quality and water treatment procedures on the active bacterial assemblages at two desalination sites.

    Science.gov (United States)

    Manes, C-L de O; Barbe, C; West, N J; Rapenne, S; Lebaron, P

    2011-07-15

    Inorganic and organic compounds, particles and microorganisms in intake waters are mainly responsible for fouling of reverse osmosis membranes, which reduces the efficiency of the desalination process. The characterization of seawater quality to better predict its fouling potential remains a challenge for the desalination field and little is known about the seasonal variability of water quality parameters in the coastal waters used to supply desalination plants. In this study, standard water quality methods were combined with flow cytometry and molecular methods (16S rRNA sequencing and fingerprinting) to assess in parallel, the physicochemical properties, the microbial abundance and the active microbial community composition of the intake waters and their associated pretreated waters at two desalination sites from July 2007 to July 2008. The overall assessment of quality parameters revealed that microfiltration followed by slow sand filtration were the most efficient in removing microorganisms than the conventional dual media filtration routinely used in full-scale desalination plants, and that all treatments were inefficient for organic matter reduction. Temporal variation of the environmental parameters such as temperature, turbidity and silt density index only moderately affected the bacterial community structure in raw waters, but that interestingly, water treatment compartments changed the composition and diversity of the metabolically active bacterial populations and thus create distinct ecological post-treatment niches.

  3. Materials for next-generation desalination and water purification membranes

    Science.gov (United States)

    Werber, Jay R.; Osuji, Chinedum O.; Elimelech, Menachem

    2016-05-01

    Membrane-based separations for water purification and desalination have been increasingly applied to address the global challenges of water scarcity and the pollution of aquatic environments. However, progress in water purification membranes has been constrained by the inherent limitations of conventional membrane materials. Recent advances in methods for controlling the structure and chemical functionality in polymer films can potentially lead to new classes of membranes for water purification. In this Review, we first discuss the state of the art of existing membrane technologies for water purification and desalination, highlight their inherent limitations and establish the urgent requirements for next-generation membranes. We then describe molecular-level design approaches towards fabricating highly selective membranes, focusing on novel materials such as aquaporin, synthetic nanochannels, graphene and self-assembled block copolymers and small molecules. Finally, we highlight promising membrane surface modification approaches that minimize interfacial interactions and enhance fouling resistance.

  4. Microfluidic desalination techniques and their potential applications.

    Science.gov (United States)

    Roelofs, S H; van den Berg, A; Odijk, M

    2015-09-07

    In this review we discuss recent developments in the emerging research field of miniaturized desalination. Traditionally desalination is performed to convert salt water into potable water and research is focused on improving performance of large-scale desalination plants. Microfluidic desalination offers several new opportunities in comparison to macro-scale desalination, such as providing a platform to increase fundamental knowledge of ion transport on the nano- and microfluidic scale and new microfluidic sample preparation methods. This approach has also lead to the development of new desalination techniques, based on micro/nanofluidic ion-transport phenomena, which are potential candidates for up-scaling to (portable) drinking water devices. This review assesses microfluidic desalination techniques on their applications and is meant to contribute to further implementation of microfluidic desalination techniques in the lab-on-chip community.

  5. Optimal scheduling of biocide dosing for seawater-cooled power and desalination plants

    KAUST Repository

    Mahfouz, Abdullah Bin

    2011-02-13

    Thermal desalination systems are typically integrated with power plants to exploit the excess heat resulting from the power-generation units. Using seawater in cooling the power plant and the desalination system is a common practice in many parts of the world where there is a shortage of freshwater. Biofouling is one of the major problems associated with the usage of seawater in cooling systems. Because of the dynamic variation in the power and water demands as well as the changes in the characteristics of seawater and the process, there is a need to develop an optimal policy for scheduling biocide usage and cleaning maintenance of the heat exchangers. The objective of this article is to introduce a systematic procedure for the optimization of scheduling the dosing of biocide and dechlorination chemicals as well as cleaning maintenance for a power production/thermal desalination plant. A multi-period optimization formulation is developed and solved to determine: the optimal levels of dosing and dechlorination chemicals; the timing of maintenance to clean the heat-exchange surfaces; and the dynamic dependence of the biofilm growth on the applied doses, the seawater-biocide chemistry, the process conditions, and seawater characteristics for each time period. The technical, economic, and environmental considerations of the system are accounted for. A case study is solved to elucidate the applicability of the developed optimization approach. © 2011 Springer-Verlag.

  6. Nanotechnology applications to desalination : a report for the joint water reuse & desalination task force.

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Patrick Vane; Mayer, Tom; Cygan, Randall Timothy

    2011-01-01

    Nanomaterials and nanotechnology methods have been an integral part of international research over the past decade. Because many traditional water treatment technologies (e.g. membrane filtration, biofouling, scale inhibition, etc.) depend on nanoscale processes, it is reasonable to expect one outcome of nanotechnology research to be better, nano-engineered water treatment approaches. The most immediate, and possibly greatest, impact of nanotechnology on desalination methods will likely be the development of membranes engineered at the near-molecular level. Aquaporin proteins that channel water across cell membranes with very low energy inputs point to the potential for dramatically improved performance. Aquaporin-laced polymer membranes and aquaporin-mimicking carbon nanotubes and metal oxide membranes developed in the lab support this. A critical limitation to widespread use of nanoengineered desalination membranes will be their scalability to industrial fabrication processes. Subsequent, long-term improvements in nanoengineered membranes may result in self-healing membranes that ideally are (1) more resistant to biofouling, (2) have biocidal properties, and/or (3) selectively target trace contaminants.

  7. Model-Based Extracted Water Desalination System for Carbon Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Dees, Elizabeth M. [General Electric Global Research Center, Niskayuna, NY (United States); Moore, David Roger [General Electric Global Research Center, Niskayuna, NY (United States); Li, Li [Pennsylvania State Univ., University Park, PA (United States); Kumar, Manish [Pennsylvania State Univ., University Park, PA (United States)

    2017-05-28

    Over the last 1.5 years, GE Global Research and Pennsylvania State University defined a model-based, scalable, and multi-stage extracted water desalination system that yields clean water, concentrated brine, and, optionally, salt. The team explored saline brines that ranged across the expected range for extracted water for carbon sequestration reservoirs (40,000 up to 220,000 ppm total dissolved solids, TDS). In addition, the validated the system performance at pilot scale with field-sourced water using GE’s pre-pilot and lab facilities. This project encompassed four principal tasks, in addition to Project Management and Planning: 1) identify a deep saline formation carbon sequestration site and a partner that are suitable for supplying extracted water; 2) conduct a techno-economic assessment and down-selection of pre-treatment and desalination technologies to identify a cost-effective system for extracted water recovery; 3) validate the downselected processes at the lab/pre-pilot scale; and 4) define the scope of the pilot desalination project. Highlights from each task are described below: Deep saline formation characterization The deep saline formations associated with the five DOE NETL 1260 Phase 1 projects were characterized with respect to their mineralogy and formation water composition. Sources of high TDS feed water other than extracted water were explored for high TDS desalination applications, including unconventional oil and gas and seawater reverse osmosis concentrate. Technoeconomic analysis of desalination technologies Techno-economic evaluations of alternate brine concentration technologies, including humidification-dehumidification (HDH), membrane distillation (MD), forward osmosis (FO), turboexpander-freeze, solvent extraction and high pressure reverse osmosis (HPRO), were conducted. These technologies were evaluated against conventional falling film-mechanical vapor recompression (FF-MVR) as a baseline desalination process. Furthermore, a

  8. Tunable C2N Membrane for High Efficient Water Desalination

    Science.gov (United States)

    Yang, Yanmei; Li, Weifeng; Zhou, Hongcai; Zhang, Xiaoming; Zhao, Mingwen

    2016-07-01

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently reported graphene-like carbon nitride (g-C2N) monolayer can serve as high efficient filters for water desalination. Taking the advantages of the intrisic nanoporous structure and excellent mechanical properties of g-C2N, high water transparency and strong salt filtering capability have been demonstrated in our simulations. More importantly, the “open” and “closed” states of the g-C2N filter can be precisely regulated by tensile strain. It is found that the water permeability of g-C2N is significantly higher than that reported for graphene filters by almost one order of magnitude. In the light of the abundant family of graphene-like carbon nitride monolayered materials, our results thus offer a promising approach to the design of high efficient filteration architectures.

  9. Tunable C2N Membrane for High Efficient Water Desalination.

    Science.gov (United States)

    Yang, Yanmei; Li, Weifeng; Zhou, Hongcai; Zhang, Xiaoming; Zhao, Mingwen

    2016-07-07

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently reported graphene-like carbon nitride (g-C2N) monolayer can serve as high efficient filters for water desalination. Taking the advantages of the intrisic nanoporous structure and excellent mechanical properties of g-C2N, high water transparency and strong salt filtering capability have been demonstrated in our simulations. More importantly, the "open" and "closed" states of the g-C2N filter can be precisely regulated by tensile strain. It is found that the water permeability of g-C2N is significantly higher than that reported for graphene filters by almost one order of magnitude. In the light of the abundant family of graphene-like carbon nitride monolayered materials, our results thus offer a promising approach to the design of high efficient filteration architectures.

  10. Design concept and its requirements of the integrated SMART nuclear desalination plant

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Young Dong; Kim, Young In; Chon, Bong Hyun; Lee, Doo Jung; Chang, Moon Hee

    2001-02-01

    The integrated SMART desalination plant consists of four(4) units of Multi Effect Distillation Process combined with Thermal-Vapor Compressor(MED-TVC) and coupled with the extracted steam from turbine through the steam transformer. Steam transformer produces the main pressure steam and supplies to the MED-TVC unit. Each distillation unit has the production the capacity of 10,000 m3/day of distilled water per day at top brine temperature of 65 deg C using the seawater supplied at temperature of 33 deg C. MED-TVC was selected as a desalination process coupled with SMART, since the thermal vapor compression is very effective where the steam is available at high temperature and pressure conditions than required in the evaporator. The MED-TVC unit is consisted of the steam supply system, vapor and condensate system, seawater supply system, brine system and chemical dosing system. The standard design of the SMART desalination plant is under development as a part of the SMART project. This report describes design concept of these systems and their requirements.

  11. Development of an environmental impact assessment and decision support system for seawater desalination plants

    NARCIS (Netherlands)

    Lattemann, S.

    2010-01-01

    Seawater desalination is a rapidly growing coastal-based industry. The combined production capacity of all seawater desalination plants worldwide has increased by 30% over the last two years: from 28 million cubic meters per day in 2007—which is the equivalent of the average discharge of the River

  12. Development of an environmental impact assessment and decision support system for seawater desalination plants

    NARCIS (Netherlands)

    Lattemann, S.

    2010-01-01

    Seawater desalination is a rapidly growing coastal-based industry. The combined production capacity of all seawater desalination plants worldwide has increased by 30% over the last two years: from 28 million cubic meters per day in 2007—which is the equivalent of the average discharge of the River S

  13. INFLUENCE OF NANOFILTRATION PRETREATMENT ON SCALE DEPOSITION IN MULTI-STAGE FLASH THERMAL DESALINATION PLANTS

    Directory of Open Access Journals (Sweden)

    Aiman E Al-Rawajfeh

    2011-01-01

    Full Text Available Scale formation represents a major operational problem encountered in thermal desalination plants. In current installed plants, and to allow for a reasonable safety margin, sulfate scale deposition limits the top brine temperature (TBT in multi-stage flash (MSF distillers up to 110-112oC. This has significant effect on the unit capital, operational and water production cost. In this work, the influence of nanofiltration (NF pretreatment on the scale deposition potential and increasing TBT in MSF thermal desalination plants is modeled on the basis of mass transfer with chemical reaction of solutes in the brine. Full and partial NF-pretreatment of the feed water were investigated. TBT can be increased in MSF by increasing the percentage of NF-treated feed. Full NF pretreatment of the make-up allows TBT in the MSF plant to be raised up to 175oC in the case of di hybrid NF-MSF and up to 165oC in the case of tri hybrid NF-RO-MSF. The significant scale reduction is associated with increasing flashing range, unit recovery, unit performance, and will lead to reduction in heat transfer surface area, pumping power and therefore, water production cost.

  14. Aridity, desalination plants and tourism in the eastern Canary Islands

    Directory of Open Access Journals (Sweden)

    José-León García-Rodríguez

    2016-05-01

    Full Text Available The islands of Lanzarote and Fuerteventura are the easternmost of the Canary Islands, and are located on the southern edge of the temperate zone, in the subtropical anticyclone belt. With less than 150 mm of rainfall a year, they are classified as an arid zone. Their inhabitants have devised original agricultural systems to combat the aridity, although low yields have historically limited socio-economic development and population growth. These systems were used until the introduction of seawater desalination plants and the arrival of tourism in the last third of the twentieth century, which improved living standards for the local population but also led to a cultural transition. Nevertheless, these farming systems have left behind an important regional heritage, with an environmental and scenic value that has played an integral role in the latest phase of development. The systems have become a tourist attraction and have been central to the two islands being designated biosphere reserves by UNESCO. This article aims to analyse the main socioeconomic and land-use changes that have come about as a result of desalination technology.

  15. Economic Analysis of a Brackish Water Photovoltaic-Operated (BWRO-PV) Desalination System: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Al-Karaghouli, A.; Kazmerski, L. L.

    2010-10-01

    The photovoltaic (PV)-powered reverse-osmosis (RO) desalination system is considered one of the most promising technologies in producing fresh water from both brackish and sea water, especially for small systems located in remote areas. We analyze the economic viability of a small PV-operated RO system with a capacity of 5 m3/day used to desalinate brackish water of 4000 ppm total dissolve solids, which is proposed to be installed in a remote area of the Babylon governorate in the middle of Iraq; this area possesses excellent insolation throughout the year. Our analysis predicts very good economic and environmental benefits of using this system. The lowest cost of fresh water achieved from using this system is US $3.98/ m3, which is very reasonable compared with the water cost reported by small-sized desalination plants installed in rural areas in other parts of the world. Our analysis shows that using this small system will prevent the release annually of 8,170 kg of CO2, 20.2 kg of CO, 2.23 kg of CH, 1.52 kg of particulate matter, 16.41 kg of SO2, and 180 kg of NOx.

  16. Hybrid membrane operations in water desalination and industrial process rationalisation.

    Science.gov (United States)

    Drioli, E; Di Profio, G; Curcio, E

    2005-01-01

    Membrane science and technology are recognized today as powerful tools in resolving some important global problems, and developing newer industrial processes, needed from the imperative of sustainable industrial growth. In seawater desalination, for resolving the dramatic increase of freshwater demand in many regions of the world, membrane unitary operations or the combination of some of them in integrated systems are already a real means for producing water from the sea, at lower costs and minimum environmental impact, with a very interesting prospective in particular for poor economy countries. However, membranes are used or are becoming used in some important industrial fields, for developing more efficient productive cycles, with reduced waste of raw-material, reducing the polluting charge by controlling byproduct generation, and reducing overall costs. In the present paper, other than for seawater desalination applications, some industrial applications where membrane technology has led already to match the goal of process intensification are discussed.

  17. High performance hydrophilic pervaporation composite membranes for water desalination

    KAUST Repository

    Liang, Bin

    2014-08-01

    A three-layer thin film nanofibrous pervaporation composite (TFNPVC) membrane was prepared by sequential deposition using electrospraying/electrospinning. The poly(vinyl alcohol) (PVA) top barrier layer was first electrosprayed on aluminum foil and its thickness can be easily controlled by adjusting the collecting time. Next a polyacrylonitrile (PAN) nanofibrous scaffold was deposited by electrospinning as a mid-layer support. A nonwoven PET layer is used to complete the composite membrane. The pervaporation desalination performance of TFNPVC membranes was tested using NaCl solutions at 100. Pa and at room temperature. The TFNPVC membranes show excellent desalination performance (high water flux and salt rejection >. 99.5%) for different salt concentrations with virtually no change in performance after 50. h of operation. © 2014 Elsevier B.V.

  18. 宁德核电站项目海水淡化设计方案比选%Comparison of Design Schemes for Sea Water Desalination (SWD) in Ningde Nuclear Power Plant Project

    Institute of Scientific and Technical Information of China (English)

    周晶

    2011-01-01

    Draft comparison of sea water desalination (SWD) applied in Fujian Ningde nuclear power plant was introduced. The characters of current main SWD processes were analyzed in terms of technology and economy. According to the current operation condition, pretreatment processes of membrane system used in SWD in Fujian Ningde nuclear power plant were also discussed. The result shows that the traditional pretreatment process is more suitable for SWD in Fujian Ningde nuclear power plant.%介绍了海水淡化在福建宁德核电站设计中的方案选择,从技术经济角度分析当前主流的海水淡化工艺特点,并结合已建核电站的运行情况,对福建宁德核电站膜法海水淡化系统预处理工艺方案的比选进行了论述,表明传统预处理工艺更适合福建宁德核电站海水淡化系统.

  19. Quantized Water Transport: Ideal Desalination through Graphyne-4 Membrane

    Science.gov (United States)

    Zhu, Chongqin; Li, Hui; Zeng, Xiao Cheng; Wang, E. G.; Meng, Sheng

    2014-03-01

    The shortage of clean and fresh water is one of most pervasive problems afflicting human being's life in the world. Desalination is one viable solution to produce clean water, since 98% of the available water in the form of salty water. Using molecular dynamics simulations, we demonstrate that graphyne sheet exhibits promising potential for nanoscale desalination to achieve both high water permeability and salt rejection rate. In addition, Graphyne sheets also are mechanically robust with high tolerance to deformation. Especially, γ-graphyne-4 has the best performance with 100% slat rejection and an unprecedented water permeability of ~ 13L/cm2/day/MPa. 3 orders of magnitude higher than prevailing commercial membranes based on reverse osmosis, and ~ 10 times higher than the state-of-the-art nanoporous graphene. Strikingly, water permeability across graphyne exhibits unexpected nonlinear dependence on the pore area. This counter-intuitive behavior is attributed to the quantized nature of water flow at the nanoscale, which has wide implications in controlling nanoscale water transport and designing highly effective membrane.

  20. Source book for planning nuclear dual-purpose electric/distillation desalination plants

    Energy Technology Data Exchange (ETDEWEB)

    Reed, S.A.

    1981-02-01

    A source book on nuclear dual-purpose electric/distillation desalination plants was prepared to assist government and other planners in preparing broad evaluations of proposed applications of dual-purpose plants. The document is divided into five major sections. Section 1 presents general discussions relating to the benefits of dual-purpose plants, and spectrum for water-to-power ratios. Section 2 presents information on commercial nuclear plants manufactured by US manufacturers. Section 3 gives information on distillation desalting processes and equipment. Section 4 presents a discussion on feedwater pretreatment and scale control. Section 5 deals with methods for coupling the distillation and electrical generating plants to operate in the dual mode.

  1. Forward osmosis :a new approach to water purification and desalination.

    Energy Technology Data Exchange (ETDEWEB)

    Miller, James Edward; Evans, Lindsey R.

    2006-07-01

    Fresh, potable water is an essential human need and thus looming water shortages threaten the world's peace and prosperity. Waste water, brackish water, and seawater have great potential to fill the coming requirements. Unfortunately, the ability to exploit these resources is currently limited in many parts of the world by both the cost of the energy and the investment in equipment required for purification/desalination. Forward (or direct) osmosis is an emerging process for dewatering aqueous streams that might one day help resolve this problem. In FO, water from one solution selectively passes through a membrane to a second solution based solely on the difference in the chemical potential (concentration) of the two solutions. The process is spontaneous, and can be accomplished with very little energy expenditure. Thus, FO can be used, in effect, to exchange one solute for a different solute, specifically chosen for its chemical or physical properties. For desalination applications, the salts in the feed stream could be exchanged for an osmotic agent specifically chosen for its ease of removal, e.g. by precipitation. This report summarizes work performed at Sandia National Laboratories in the area of FO and reviews the status of the technology for desalination applications. At its current state of development, FO will not replace reverse osmosis (RO) as the most favored desalination technology, particularly for routine waters. However, a future role for FO is not out of the question. The ability to treat waters with high solids content or fouling potential is particularly attractive. Although our analysis indicates that FO is not cost effective as a pretreatment for conventional BWRO, water scarcity will likely drive societies to recover potable water from increasingly marginal resources, for example gray water and then sewage. In this context, FO may be an attractive pretreatment alternative. To move the technology forward, continued improvement and

  2. Tunable water desalination across Graphene Oxide Framework membranes

    Energy Technology Data Exchange (ETDEWEB)

    Nicolai, Adrien [Rensselaer Polytechnic Institute (RPI); Sumpter, Bobby G [ORNL; Meunier, V. [Rensselaer Polytechnic Institute (RPI)

    2014-01-01

    The performance of graphene oxide framework (GOF) membranes for water desalination is assessed using classical molecular dynamics (MD) simulations. The coupling between water permeability and salt rejection GOF membranes is studied as a function of linker concentration n, thickness h and applied pressure DP. The simulations reveal that water permeability in GOF-(n,h) membranes can be tuned from 5 (n = 32 and h = 6.5 nm) to 400 L/cm2/day/MPa (n = 64 and h = 2.5 nm) and follows the law Cnh an . For a given pore size (n = 16 or 32), water permeability of GOF membranes increases when the pore spacing decreases, whereas for a given pore spacing (n = 32 or 64), water permeability increases by up to two orders of magnitude when the pore size increases. Furthermore, for linker concentrations n 32, the high water permeability corresponds to a 100% salt rejection, elevating this type of GOF membrane as an ideal candidate for water desalination. Compared to experimental performance of reverse osmosis membranes, our calculations suggest that under the same conditions of applied pressure and characteristics of membranes (DP 10 MPa and h 100 nm), one can expect a perfect salt rejection coupled to a water permeability two orders of magnitude higher than existing technologies, i.e., from a few cL/cm2/day/MPa to a few L/cm2/day/MPa.

  3. Mild desalination of various raw water streams

    NARCIS (Netherlands)

    Groot, C.K.; Broek, W.B.P. van den; Loewenberg, J.; Koeman-Stein-N.E.; Heidekamp, M.; Schepper, W. de

    2015-01-01

    For chemical industries, fresh water availability is a pre-requisite for sustainable operation. However, in many delta areas around the world, fresh water is scarce. Therefore, the E4Water project (http://www.e4water.eu) comprises a case study at the Dow site in Terneuzen, The Netherlands, which is

  4. Mild desalination of various raw water streams

    NARCIS (Netherlands)

    Groot, C.K.; Broek, W.B.P. van den; Loewenberg, J.; Koeman-Stein-N.E.; Heidekamp, M.; Schepper, W. de

    2015-01-01

    For chemical industries, fresh water availability is a pre-requisite for sustainable operation. However, in many delta areas around the world, fresh water is scarce. Therefore, the E4Water project (http://www.e4water.eu) comprises a case study at the Dow site in Terneuzen, The Netherlands, which is

  5. Drivers of an urban community's acceptance of a large desalination scheme for drinking water

    Science.gov (United States)

    Gibson, Fiona L.; Tapsuwan, Sorada; Walker, Iain; Randrema, Elodie

    2015-09-01

    Changing climates and growing populations have prompted policy makers to shift to more climate resilient, technology-driven water sources, such as seawater desalination. Desalination is a prominent water resource in the Middle East but countries in other parts of the world with similar scarcity issues and good access to sea water, such as Australia, have been comparatively slow to adopt it. This paper explores attitudes to desalination in Perth, Western Australia, and the factors that influence its acceptance. We compared individuals' acceptance of desalination over two time periods by using identical surveys administered in 2007 and 2012. We then examined the attitudinal factors - attitudes towards desalination and attitudes towards the environment - that influence acceptance. Acceptance of desalination was reasonably high and stable at both times (74% and 73% in 2007 and 2012 respectively). We found that respondents' attitudes to perceived outcomes and benefits, fairness, environmental obligation and risk were important predictors of their acceptance of desalination in both surveys. However the weight given to these aspects varied over time. The findings show that there is still mixed community sentiment towards desalination, which helps to explain why acceptance has not increased since desalination was introduced in 2006.

  6. An Applied Research Program on Water Desalination with Renewable Energies

    OpenAIRE

    2008-01-01

    The use of renewable energy for desalination might be quite different in many places of the world. In Mexico, specifically in Baja California, there is an abundance of traditional renewable resources like sun and wind but also some others like hot springs at the coast, tidal currents and tidal amplitudes of over six meters in the upper part of the Gulf of California associated with a severe scarcity of fresh water. The National University of Mexico (UNAM) started two years ago a well organize...

  7. The future of seawater desalination: energy, technology, and the environment.

    Science.gov (United States)

    Elimelech, Menachem; Phillip, William A

    2011-08-05

    In recent years, numerous large-scale seawater desalination plants have been built in water-stressed countries to augment available water resources, and construction of new desalination plants is expected to increase in the near future. Despite major advancements in desalination technologies, seawater desalination is still more energy intensive compared to conventional technologies for the treatment of fresh water. There are also concerns about the potential environmental impacts of large-scale seawater desalination plants. Here, we review the possible reductions in energy demand by state-of-the-art seawater desalination technologies, the potential role of advanced materials and innovative technologies in improving performance, and the sustainability of desalination as a technological solution to global water shortages.

  8. MATHEMATICAL MODEL OF ICE FORMATION ON TEPLOOBMENNOGO SIDE OF THETHERMOELECTRIC DESALINATION PLANT

    Directory of Open Access Journals (Sweden)

    A. M. Gajiyev

    2016-01-01

    Full Text Available Abstract. The necessity of the use of technology and analytically summarizes the methods of desalination of seawater and brackish waters. Tasked to investigate the processes occurring in the desalination plant with the continuous process of freezing of ice on heat transfer surface with a film mode of fluid motion.To solve this problem the article deals with mathematical cal model of ice formation on heat transfer surfaces and thermo-electric distiller. The model allows us to estimate the rise time and the thickness of the ice under specified conditions of temperature and flow of water. It is shown that the use of thermoelectric converters allows the flexibility to adjust the mode of ice formation. Solved the problem of determining the maximum thickness of the ice at which freezing is possible film of water flowing through it at a predetermined temperature of the cooling plate and the cooling capacity of the thermoelectric battery.It is established that the performance of thermoelectric opreznitive of the system increases due to the increase in the number of cooled surfaces, and the use of the heat from the hot junction of the converters for melting of ice increases the energy efficiency of the system as a whole. 

  9. Geophysical remote sensing of water reservoirs suitable for desalinization.

    Energy Technology Data Exchange (ETDEWEB)

    Aldridge, David Franklin; Bartel, Lewis Clark; Bonal, Nedra; Engler, Bruce Phillip

    2009-12-01

    In many parts of the United States, as well as other regions of the world, competing demands for fresh water or water suitable for desalination are outstripping sustainable supplies. In these areas, new water supplies are necessary to sustain economic development and agricultural uses, as well as support expanding populations, particularly in the Southwestern United States. Increasing the supply of water will more than likely come through desalinization of water reservoirs that are not suitable for present use. Surface-deployed seismic and electromagnetic (EM) methods have the potential for addressing these critical issues within large volumes of an aquifer at a lower cost than drilling and sampling. However, for detailed analysis of the water quality, some sampling utilizing boreholes would be required with geophysical methods being employed to extrapolate these sampled results to non-sampled regions of the aquifer. The research in this report addresses using seismic and EM methods in two complimentary ways to aid in the identification of water reservoirs that are suitable for desalinization. The first method uses the seismic data to constrain the earth structure so that detailed EM modeling can estimate the pore water conductivity, and hence the salinity. The second method utilizes the coupling of seismic and EM waves through the seismo-electric (conversion of seismic energy to electrical energy) and the electro-seismic (conversion of electrical energy to seismic energy) to estimate the salinity of the target aquifer. Analytic 1D solutions to coupled pressure and electric wave propagation demonstrate the types of waves one expects when using a seismic or electric source. A 2D seismo-electric/electro-seismic is developed to demonstrate the coupled seismic and EM system. For finite-difference modeling, the seismic and EM wave propagation algorithms are on different spatial and temporal scales. We present a method to solve multiple, finite-difference physics

  10. Tailor-made polyamide membranes for water desalination.

    Science.gov (United States)

    Choi, Wansuk; Gu, Joung-Eun; Park, Sang-Hee; Kim, Seyong; Bang, Joona; Baek, Kyung-Youl; Park, Byoungnam; Lee, Jong Suk; Chan, Edwin P; Lee, Jung-Hyun

    2015-01-27

    Independent control of the extrinsic and intrinsic properties of the polyamide (PA) selective layer is essential for designing thin-film composite (TFC) membranes with performance characteristics required for water purification applications besides seawater desalination. Current commercial TFC membranes fabricated via the well-established interfacial polymerization (IP) approach yield materials that are far from ideal because their layer thickness, surface roughness, polymer chemistry, and network structure cannot be separately tailored. In this work, tailor-made PA-based desalination membranes based on molecular layer-by-layer (mLbL) assembly are presented. The mLbL technique enables the construction of an ultrathin and highly cross-linked PA selective layer in a precisely and independently controlled manner. The mLbL-assembled TFC membranes exhibit significant enhancements in performance compared to their IP-assembled counterparts. A maximum sodium chloride rejection of 98.2% is achieved along with over 2.5 times higher water flux than the IP-assembled counterpart. More importantly, this work demonstrates the broad applicability of mLbL in fabricating a variety of PA-based TFC membranes with nanoscale control of the selective layer thickness and roughness independent of the specific polyamide chemistry.

  11. Design of a process for supercritical water desalination with zero liquid discharge

    NARCIS (Netherlands)

    Odu, S.O.; Ham, van der A.G.J.; Metz, S.; Kersten, S.R.A.

    2015-01-01

    Conventional desalination methods have a major drawback; the production of a liquid waste stream which must be disposed. The treatment of this waste stream has always presented technical, economic, and environmental challenges. The supercritical water desalination (SCWD) process meets these challeng

  12. Composition and Variability of Biofouling Organisms in Seawater Reverse Osmosis Desalination Plants ▿ †

    OpenAIRE

    Zhang, Minglu; Jiang, Sunny; Tanuwidjaja, Dian; Voutchkov, Nikolay; Hoek, Eric M. V.; Cai, Baoli

    2011-01-01

    Seawater reverse osmosis (SWRO) membrane biofouling remains a common challenge in the desalination industry, but the marine bacterial community that causes membrane fouling is poorly understood. Microbial communities at different stages of treatment processes (intake, cartridge filtration, and SWRO) of a desalination pilot plant were examined by both culture-based and culture-independent approaches. Bacterial isolates were identified to match the genera Shewanella, Alteromonas, Vibrio, and Ce...

  13. Composition and Variability of Biofouling Organisms in Seawater Reverse Osmosis Desalination Plants ▿ †

    OpenAIRE

    Zhang, Minglu; Jiang, Sunny; Tanuwidjaja, Dian; Voutchkov, Nikolay; Hoek, Eric M. V.; Cai, Baoli

    2011-01-01

    Seawater reverse osmosis (SWRO) membrane biofouling remains a common challenge in the desalination industry, but the marine bacterial community that causes membrane fouling is poorly understood. Microbial communities at different stages of treatment processes (intake, cartridge filtration, and SWRO) of a desalination pilot plant were examined by both culture-based and culture-independent approaches. Bacterial isolates were identified to match the genera Shewanella, Alteromonas, Vibrio, and Ce...

  14. Using mesoporous carbon electrodes for brackish water desalination.

    Science.gov (United States)

    Zou, Linda; Li, Lixia; Song, Huaihe; Morris, Gayle

    2008-04-01

    Electrosorptive deionisation is an alternative process to remove salt ions from the brackish water. The porous carbon materials are used as electrodes. When charged in low voltage electric fields, they possess a highly charged surface that induces adsorption of salt ions on the surface. This process is reversible, so the adsorbed salt ions can be desorbed and the electrode can be reused. In the study, an ordered mesoporous carbon (OMC) electrode was developed for electrosorptive desalination. The effects of pore arrangement pattern (ordered and random) and pore size distribution (mesopores and micropores) on the desalination performance was investigated by comparing OMC and activated carbon (AC). It were revealed from X-ray diffraction and N(2) sorption measurements that AC has both micropores and mesopores, whereas ordered mesopores are dominant in OMC. Their performance as potential electrodes to remove salt was evaluated by cyclic voltammetry (CV) and galvanostatic charge/discharge tests at a range of electrolyte concentrations and sweep rates. It is deduced that under the same electrochemical condition the specific capacitance values of OMC electrode (i.e. 133 F/g obtained from CV at a sweep rate of 1 mV/s in 0.1M NaCl solution) are larger than those of AC electrode (107 F/g), suggesting that the former has a higher desalting capacity than the latter. Furthermore, the OMC electrode shows a better rate capacity than the AC electrode. In addition, the desalination capacities were quantified by the batch-mode experiment at low voltage of 1.2V in 25 ppm NaCl solution (50 micros/cm conductivity). It was found that the adsorbed ion amounts of OMC and AC electrodes were 11.6 and 4.3 micromol/g, respectively. The excellent electrosorptive desalination performance of OMC electrode might be not only due to the suitable pore size (average of 3.3 nm) for the propagation of the salt ions, but also due to the ordered mesoporous structure that facilitates desorption of the

  15. Treatment and desalination of domestic wastewater for water reuse in a four-chamber microbial desalination cell.

    Science.gov (United States)

    Lu, Yaobin; Abu-Reesh, Ibrahim M; He, Zhen

    2016-09-01

    Microbial desalination cells (MDCs) have been studied for contaminant removal from wastewater and salinity reduction in saline water. However, in an MDC wastewater treatment and desalination occurs in different streams, and high salinity of the treated wastewater creates challenges for wastewater reuse. Herein, a single-stream MDC (SMDC) with four chambers was developed for simultaneous organic removal and desalination in the same synthetic wastewater. This SMDC could achieve a desalination rate of 12.2-31.5 mg L(-1) h(-1) and remove more than 90 % of the organics and 75 % of NH4 (+)-N; the pH imbalance between the anode and cathode chambers was also reduced. Several strategies such as controlling catholyte pH, increasing influent COD concentration, adopting the batch mode, applying external voltage, and increasing the alkalinity of wastewater were investigated for improving the SMDC performance. Under a condition of 0.4 V external voltage, anolyte pH adjustment, and a batch mode, the SMDC decreased the wastewater salinity from 1.45 to below 0.75 mS cm(-1), which met the salinity standard of wastewater for irrigation. Those results encourage further development of the SMDC technology for sustainable wastewater treatment and reuse.

  16. Water Storage Instead of Energy Storage for Desalination Powered by Renewable Energy—King Island Case Study

    Directory of Open Access Journals (Sweden)

    Aya Tafech

    2016-10-01

    Full Text Available In this paper, we scrutinized the energy storage options used in mitigation of the intermittent nature of renewable energy resources for desalination process. In off-grid islands and remote areas, renewable energy is often combined with appropriate energy storage technologies (ESTs to provide a consistent and reliable electric power source. We demonstrated that in developing a renewable energy scheme for desalination purposes, product (water storage is a more reliable and techno-economic solution. For a King Island (Southeast Australia case-study, electric power production from renewable energy sources was sized under transient conditions to meet the dynamic demand of freshwater throughout the year. Among four proposed scenarios, we found the most economic option by sizing a 13 MW solar photovoltaic (PV field to instantly run a proportional RO desalination plant and generate immediate freshwater in diurnal times without the need for energy storage. The excess generated water was stored in 4 × 50 ML (mega liter storage tanks to meet the load in those solar deficit times. It was also demonstrated that integrating well-sized solar PV with wind power production shows more consistent energy/water profiles that harmonize the transient nature of energy sources with the water consumption dynamics, but that would have trivial economic penalties caused by larger desalination and water storage capacities.

  17. Desalination and reuse of high-salinity shale gas produced water: drivers, technologies, and future directions.

    Science.gov (United States)

    Shaffer, Devin L; Arias Chavez, Laura H; Ben-Sasson, Moshe; Romero-Vargas Castrillón, Santiago; Yip, Ngai Yin; Elimelech, Menachem

    2013-09-03

    In the rapidly developing shale gas industry, managing produced water is a major challenge for maintaining the profitability of shale gas extraction while protecting public health and the environment. We review the current state of practice for produced water management across the United States and discuss the interrelated regulatory, infrastructure, and economic drivers for produced water reuse. Within this framework, we examine the Marcellus shale play, a region in the eastern United States where produced water is currently reused without desalination. In the Marcellus region, and in other shale plays worldwide with similar constraints, contraction of current reuse opportunities within the shale gas industry and growing restrictions on produced water disposal will provide strong incentives for produced water desalination for reuse outside the industry. The most challenging scenarios for the selection of desalination for reuse over other management strategies will be those involving high-salinity produced water, which must be desalinated with thermal separation processes. We explore desalination technologies for treatment of high-salinity shale gas produced water, and we critically review mechanical vapor compression (MVC), membrane distillation (MD), and forward osmosis (FO) as the technologies best suited for desalination of high-salinity produced water for reuse outside the shale gas industry. The advantages and challenges of applying MVC, MD, and FO technologies to produced water desalination are discussed, and directions for future research and development are identified. We find that desalination for reuse of produced water is technically feasible and can be economically relevant. However, because produced water management is primarily an economic decision, expanding desalination for reuse is dependent on process and material improvements to reduce capital and operating costs.

  18. Observations on the quality of desalinated water in the Segura river basin. Irrigation and supply; Observaciones sobre la calidad del agua desalada en la Cuenca del Seguro. Riego y abastecimiento

    Energy Technology Data Exchange (ETDEWEB)

    Latorre Carrion, M.; Camara Zapata, J. M.

    2004-07-01

    Desalination of seawater by reverse osmosis (RO) is an unconventional water resource that could help to maintain irrigation crops in the Segura river basin. Its suitability for irrigation purposes needs to be studied to prevent the soil from being harmed and the quality and yield of the crops from falling. This article describes a simulation of the functioning of a RO desalination plant based on actual seawater data (Mazarron). The results show that desalinated water has an ionic balance giving rise to a high specific absorption rate of Na+ and low electrical conductivity, which means that its quality for agricultural purposes is deficient. The article sets out the requirements for irrigation water and the problems they pose for desalination plants. The suitability of desalinated water for agricultural purposes is ecaminaed, corrective measures proposed and the cost involved quantified. (Author) 5 refs.

  19. Highly efficient hydrophobic titania ceramic membranes for water desalination.

    Science.gov (United States)

    Kujawa, Joanna; Cerneaux, Sophie; Koter, Stanisław; Kujawski, Wojciech

    2014-08-27

    Hydrophobic titania ceramic membranes (300 kD) were prepared by grafting of C6F13C2H4Si(OC2H5)3 and C12F25C2H4Si(OC2H5)3 molecules and thus applied in membrane distillation (MD) process of NaCl solutions. Grafting efficiency and hydrophobicity were evaluated by contact angle measurement, atomic force microscopy, scanning electron microscopy, nitrogen adsorption/desorption, and liquid entry pressure measurement of water. Desalination of NaCl solutions was performed using the modified hydrophobic membranes in air gap MD (AGMD) and direct contact MD (DCMD) processes in various operating conditions. High values of NaCl retention coefficient (>99%) were reached. The permeate fluxes were in the range 231-3692 g·h(-1)·m(-2), depending on applied experimental conditions. AGMD mode appeared to be more efficient showing higher fluxes and selectivity in desalination. Overall mass transfer coefficients (K) for membranes tested in AGMD were constant over the investigated temperature range. However, K values in DCMD increased at elevated temperature. The hydrophobic layer was also stable after 4 years of exposure to open air.

  20. Carbon nanotube membranes with ultrahigh specific adsorption capacity for water desalination and purification

    National Research Council Canada - National Science Library

    Yang, Hui Ying; Han, Zhao Jun; Yu, Siu Fung; Pey, Kin Leong; Ostrikov, Kostya; Karnik, Rohit

    2013-01-01

    Development of technologies for water desalination and purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation, especially for point-of-use applications...

  1. Impact of the brine from a desalination plant on a shallow seagrass ( Posidonia oceanica) meadow

    Science.gov (United States)

    Gacia, Esperança; Invers, Olga; Manzanera, Marta; Ballesteros, Enric; Romero, Javier

    2007-05-01

    Although seawater desalination has increased significantly over recent decades, little attention has been paid to the impact of the main by-product (hypersaline water: brine) on ecosystems. In the Mediterranean, potentially the most affected ecosystems are meadows of the endemic seagrass Posidonia oceanica. We studied the effect of brine on a shallow P. oceanica meadow exposed to reverse osmosis brine discharge for more than 6 years. P. oceanica proved to be very sensitive to both eutrophication and high salinities derived from the brine discharge. Affected plants showed high epiphyte load and nitrogen content in the leaves, high frequencies of necrosis marks, low total non-structural carbohydrates and low glutamine synthetase activity, compared to control plants. However, there was no indication of extensive decline of the affected meadow. This is probably due to its very shallow situation, which results in high incident radiation as well as fast dilution and dispersion of the brine plume.

  2. The Energy-Water Nexus: An Analysis and Comparison of Various Configurations Integrating Desalination with Renewable Power

    Directory of Open Access Journals (Sweden)

    Gary M. Gold

    2015-04-01

    Full Text Available This investigation studies desalination powered by wind and solar energy, including a study of a configuration using PVT solar panels. First, a water treatment was developed to estimate the power requirement for brackish groundwater reverse-osmosis (BWRO desalination. Next, an energy model was designed to (1 size a wind farm based on this power requirement and (2 size a solar farm to preheat water before reverse osmosis treatment. Finally, an integrated model was developed that combines results from the water treatment and energy models. The integrated model optimizes performances of the proposed facility to maximize daily operational profits. Results indicate that integrated facility can reduce grid-purchased electricity costs by 88% during summer months and 89% during winter when compared to a stand-alone desalination plant. Additionally, the model suggests that the integrated configuration can generate $574 during summer and $252 during winter from sales of wind- and solar-generated electricity to supplement revenue from water production. These results indicate that an integrated facility combining desalination, wind power, and solar power can potentially reduce reliance on grid-purchased electricity and advance the use of renewable power.

  3. Desalinated drinking water in the GCC countries - The need to address consumer perceptions.

    Science.gov (United States)

    Shomar, Basem; Hawari, Jalal

    2017-10-01

    The Gulf Cooperation Council (GCC) countries consist of Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates. These countries depend mainly on seawater desalination to meet their water needs. Although great emphasis is given to characterize desalinated water for its physicochemical and microbial properties, e.g. presence of metals, other organic contaminants and for bacteria, sensorial characteristics including smell, taste and color have not received the same attention. This is possibly attributed to the fact that inhabitants of GCC States do not use desalinated tap water for drinking consumption, rather they depend on locally produced or imported bottled water where color, taste and odor are not problematic. To address the consumer needs and perceptions of drinking desalinated water in GCC countries, water quality standards and guidelines, should respond to the public concern about other sensorial characteristics (organoleptic properties) including taste, odor, and trigeminal sensations. Often the root causes of color and smell in water are attributed to the presence of organic and inorganic contaminants and to bacterial growth which is frequently accompanied by the production of metabolites and byproducts that are obnoxious. The unpleasant sensorial problems associated with desalinated drinking tap water may constitute the driving force for most people in GCC countries to depend on bottled water. To encourage people in the GCC countries to consume desalinated tap water, it is essential that water testing include measurements of physicochemical properties, biofilm presence and organoleptic parameters to improve overall water quality. This review highlights the contribution of organoleptics for consumers of desalinated tap water. It extends water quality research to be addressed by standards for organoleptic parameters in desalinated drinking water. Accordingly, consumer awareness and outreach campaigns should be implemented to encourage people

  4. Economic evaluation of dual purpose desalination plants by fuel type in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Seung-Su, Kim; Man-Ki, Lee [Korea Atomic Energy Research Institute, Dae-jeon city (Korea, Republic of)

    2007-07-01

    In light of the recent rapid increase in the fossil fuel prices it is meaningful to evaluate the impact of these price changes in the economics of dual-purpose desalination projects producing electricity and fresh water simultaneously. The price of crude oil and LNG (Liquefied Natural Gas) has increased by about 200% and 100% during the past three or four years. The uranium price has also increased by nearly 500% during the same period. The purpose of this paper is to analyze and compare the economics of SMART (System-integrated Modular Advanced ReacTor) which is being developed as a small size PWR type and the LNG Combine Cycle coupled with MED (Multi-Effect Distillation) which are being acknowledged as promising energy sources for the future in Korea. The methods of analysis used in this paper are the lifetime leveled cost method for the power and water cost calculation and the power credit method for the total cost allocation. DEEP (Devaluation Economic Evaluation Program) developed by IAEA was used to perform an economic comparison between the two dual-purpose desalination projects. From the results of the analysis it is found that the desalination by SMART-MED is much superior to that of LNG CC-MED under the current economic and technical situations. It is also shown that the relative superiority of SMART-MED to LNG CC-MED will be maintained even in case where an increase in the uranium price and the SMART construction cost would reach a maximum in the sensitivity analysis. In the case that the discount rate declines to 5% per year, the relative attractiveness of SMART-MED which is a capital intensive plant will be enhanced when compared to that for a 7% discount rate. In addition to this, it is thought that a nuclear energy source will be favored much more than now in the field of desalination if the regulations for the emission of greenhouse gases are to be strengthened. (authors)

  5. Vibration Monitoring of Desalination Plant%海水淡化装置的振动监测

    Institute of Scientific and Technical Information of China (English)

    吴真光; 刘波

    2012-01-01

    通过振动测量和频谱分析,对海水淡化装置实施状态监测和故障诊断,掌握该装置运行的技术状态,分析、判断该装置的故障,为该船的预防性维修提供科学依据.%Through vibration measurement and spectrum analysis, the state monitoring and fault diagnosis of a sea-water desalination plant were carried out. Its technical state was controlled, and its fault was identified and analyzed. This work provides some database for preventive maintenance of the desalination plant.

  6. Solar energy water desalination in the United States and Saudi Arabia

    Science.gov (United States)

    Luft, W.; William, J.

    1981-01-01

    Five solar energy water desalination systems were designed to deliver 6000 cubic m/day of desalted water from either seawater or brackish water. Two systems will be selected for pilot plant construction. The pilot plants will have capacities in the range of 100 to 400 m/day. Goals of the Project Agreement for Cooperation in the Field of Solar Energy, under the auspices of the United States-Saudi Arabian Joint Commission on Economic Cooperation, are to: (1) cooperate in the field of solar energy technology for the mutual benefit of the two countries, including the development and stimulation of solar industries within the two countries; (2) advance the development of solar energy technology in the two countries; and (3) facilitate the transfer between the two countries of technology developed under this agreement.

  7. Cellulose Derived Graphenic Fibers for Capacitive Desalination of Brackish Water.

    Science.gov (United States)

    Pugazhenthiran, Nalenthiran; Sen Gupta, Soujit; Prabhath, Anupama; Manikandan, Muthu; Swathy, Jakka Ravindran; Raman, V Kalyan; Pradeep, Thalappil

    2015-09-16

    We describe a simple and inexpensive cellulose-derived and layer-by-layer stacked carbon fiber network electrode for capacitive deionization (CDI) of brackish water. The microstructure and chemical composition were characterized using spectroscopic and microscopic techniques; electrochemical/electrical performance was evaluated by cyclic voltammetry and 4-probe electrical conductivity and surface area by Brunauer-Emmett-Teller analysis, respectively. The desalination performance was investigated using a laboratory batch model CDI unit, under fixed applied voltage and varying salt concentrations. Electro-adsorption of NaCl on the graphite reinforced-cellulose (GrC) electrode reached equilibrium quickly (within 90 min) and the adsorbed salts were released swiftly (in 40 min) back into the solution, during reversal of applied potential. X-ray photoelectron spectroscopic studies clearly illustrate that sodium and chloride ions were physisorbed on the negative and positive electrodes, respectively during electro-adsorption. This GrC electrode showed an electro-adsorption capacity of 13.1 mg/g of the electrode at a cell potential of 1.2 V, with excellent recyclability and complete regeneration. The electrode has a high tendency for removal of specific anions, such as fluoride, nitrate, chloride, and sulfate from water in the following order: Cl->NO3->F->SO4(2-). GrC electrodes also showed resistance to biofouling with negligible biofilm formation even after 5 days of incubation in Pseudomonas putida bacterial culture. Our unique cost-effective methodology of layer-by-layer stacking of carbon nanofibers and concurrent reinforcement using graphite provides uniform conductivity throughout the electrode with fast electro-adsorption, rapid desorption, and extended reuse, making the electrode affordable for capacitive desalination of brackish water.

  8. Effectiveness of water desalination by membrane distillation process.

    Science.gov (United States)

    Gryta, Marek

    2012-07-17

    The membrane distillation process constitutes one of the possibilities for a new method for water desalination. Four kinds of polypropylene membranes with different diameters of capillaries and pores, as well as wall thicknesses were used in studied. The morphology of the membrane used and the operating parameters significantly influenced process efficiency. It was found that the membranes with lower wall thickness and a larger pore size resulted in the higher yields. Increasing both feed flow rate and temperature increases the permeate flux and simultaneously the process efficiency. However, the use of higher flow rates also enhanced heat losses by conduction, which decreases the thermal efficiency. This efficiency also decreases when the salt concentration in the feed was enhanced. The influence of fouling on the process efficiency was considered.

  9. Effectiveness of Water Desalination by Membrane Distillation Process

    Directory of Open Access Journals (Sweden)

    Marek Gryta

    2012-07-01

    Full Text Available The membrane distillation process constitutes one of the possibilities for a new method for water desalination. Four kinds of polypropylene membranes with different diameters of capillaries and pores, as well as wall thicknesses were used in studied. The morphology of the membrane used and the operating parameters significantly influenced process efficiency. It was found that the membranes with lower wall thickness and a larger pore size resulted in the higher yields. Increasing both feed flow rate and temperature increases the permeate flux and simultaneously the process efficiency. However, the use of higher flow rates also enhanced heat losses by conduction, which decreases the thermal efficiency. This efficiency also decreases when the salt concentration in the feed was enhanced. The influence of fouling on the process efficiency was considered.

  10. Effectiveness of Water Desalination by Membrane Distillation Process

    Science.gov (United States)

    Gryta, Marek

    2012-01-01

    The membrane distillation process constitutes one of the possibilities for a new method for water desalination. Four kinds of polypropylene membranes with different diameters of capillaries and pores, as well as wall thicknesses were used in studied. The morphology of the membrane used and the operating parameters significantly influenced process efficiency. It was found that the membranes with lower wall thickness and a larger pore size resulted in the higher yields. Increasing both feed flow rate and temperature increases the permeate flux and simultaneously the process efficiency. However, the use of higher flow rates also enhanced heat losses by conduction, which decreases the thermal efficiency. This efficiency also decreases when the salt concentration in the feed was enhanced. The influence of fouling on the process efficiency was considered. PMID:24958289

  11. Desalination and water recovery: Control of membrane fouling

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, A.V.R.; Jagan Mohan, D.; Buch, P.R.; Joshi, S.V.; Pushpito Kumar Ghosh [Reverse Osmosis Discipline, Central Salt and Marine Chemicals Research Institute, Bhavnagar, Gujarat (India)]. E-mail: salt@csir.res.in

    2006-07-01

    Ultrafiltration (UF), Nanofiltration (NF) and Reverse Osmosis (RO) technologies are widely used for the production of safe drinking water, and for the recovery of reusable water from various industrial effluent streams. The most commonly encountered phenomenon in these processes, especially in water recovery application, is membrane fouling, and control of membrane fouling is regarded as a significant challenge. Membranes with charged and hydrophilic surfaces are reported to be less susceptible to fouling and often reversible. UF/RO membranes containing negatively charged and/or neutral hydrophilic functional groups on the surface were prepared by surface modification of suitable membranes. The surface modified membranes exhibited separations of 68%-85% for Na{sub 2}SO{sub 4}, 19%-31% for MgSO{sub 4}, 10%-26% for NaCl and 2%-12% for CaCl{sub 2} with water permeation rates of 9-50 l/m{sup 2}-h at the operating pressure of 4 kg/cm{sup 2}. The UF membranes were tested for water recovery from reactive dye effluents containing solutes with molecular sizes in the range of 600-1000 Da along with inorganic solutes. Surface-modified RO membranes were utilised for desalination of brackish water. (author)

  12. SOLERAS: Solar Energy Water Desalination Project. Exxon Research and Engineering. Volume 3: Appendices pilot plan and design details and subsystem direct cost support

    Science.gov (United States)

    Details of the design of a water desalination solar pilot plant in Yanbu, Saudi Arabia are presented. The major subsystems of the plant are defined, including solar energy collection and simulation, energy storage, energy delivery, reverse osmosis/multiple effect distillation, water storage, waste disposal, backup power generators, controls and instrumentation data acquisition, facilities and enclosures, and computers. A list of the plant equipment and a set of process flow diagrams are provided. A cost analysis of the pilot plant is included.

  13. The Role of Desalinated Water in Integrated Water Resource Management in Abu Dhabi Emirate-UAE

    OpenAIRE

    Al-Omar, Muthanna

    2012-01-01

    Water resources components in Abu Dhabi encompass the conventional sources (rain, springs, ponds and groundwater), and unconventional sources (desalinated water and reclaimed wastewater). The latter represent the most important resources for the time being, since ground water is brackish or salty and the annual rainfall is very low in Abu Dhabi Emirate. Thus conventional water resources are considered under sever depletion and exceeded their natural recharging capacity by 24 times. Per capita...

  14. Needs and processes for the sea water desalination; Besoins et Procedes pour le dessalement de l'eau de mer

    Energy Technology Data Exchange (ETDEWEB)

    Livet, F. [Institut National Polytechnique (INPG-UJF), SIMaP, UMR CNRS 5266, 38 - Grenoble (France)

    2007-11-15

    The author shows the needs of the sea water desalination for the dry countries. The main technique is the reverse osmosis. It requires electricity and its development needs big electric power plants. For economical and ecological reasons, the nuclear energy seems well appropriate. Libya is for instance very interested in this technique, because of their water shortage problem. (A.L.B.)

  15. Desalination of Saline and Brackish Waters using Carbon Aerogel Technology

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Massoudinejad

    2012-10-01

    Full Text Available Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 Background and Objectives: The increasing demand for drinking water has led scientists to the use of saline waters, but existing desalinating processes are very expensive. carbon aerogel is a type of organic aerogel that is suitable for desalination owing to its unique porous structure. Low potential of fouling and deposits, very low wastewater production, electrostatic regeneration of aerogels and, in turn, no need to acid consumption, and lower power consumption are some of this technology benefits.Materials and Method: In this experimental- analytical study, the purpose was survey of saline and brackish water desalination using carbon aerogel technology and its comparison with electrolysis.The community studied was synthetic salt water samples, using of TDS and EC indicators. The minimum synthetic samples were 243. In this regard, after polymerization of Resorsinol and Formaldehyde compounds under ambient pressure conditions and then its pyrolysis, we fabricated plates of carbon aerogel.Result: With manufacturing in the pilot-scale, the effect of different parameters, including input salt concentration, current, water flow, distance of between electrodes and pH, on NaCl sorption amount of carbon aerogel electrodes were studied. Generally, adsorption amount increased with increasing of current and NaCl concentration and decreased with increasing of distance electrodes, flow and pH.  Results: Fabricating reactor at pilot-scale, we studied the effect of different parameters, including input salt concentration, current, water flow, intra-distance of electrodes, and pH on the NaCl sorption using carbon aerogel electrodes. Generally, adsorption capacity increased with increasing of current and NaCl concentration in the inlet flow, and it decreased with increasing intra-distance of electrodes, flow, and pH.Conclusion: Under the most optimal

  16. Adsorption Desalination: A Novel Method

    KAUST Repository

    Ng, Kim Choon

    2010-11-15

    The search for potable water for quenching global thirst remains a pressing concern throughout many regions of the world. The demand for new and sustainable sources and the associated technologies for producing fresh water are intrinsically linked to the solving of potable water availability and hitherto, innovative and energy efficient desalination methods seems to be the practical solutions. Quenching global thirst by adsorption desalination is a practical and inexpensive method of desalinating the saline and brackish water to produce fresh water for agriculture irrigation, industrial, and building applications. This chapter provides a general overview of the adsorption fundamentals in terms of adsorption isotherms, kinetics, and heat of adsorption. It is then being more focused on the principles of thermally driven adsorption desalination methods. The recent developments of adsorption desalination plants and the effect of operating conditions on the system performance in terms of specific daily water production and performance ratio are presented. Design of a large commercial adsorption desalination plant is also discussed herein.

  17. Desalination of brackish water and concentration of industrial effluents by electrodialysis

    Directory of Open Access Journals (Sweden)

    J. J. Schoeman

    1983-03-01

    Full Text Available Electrodialysis (ED is, at present, used mainly for the desalination of brackish drinking-water. Brackish water with a high scaling potential can be successfully treated, using the electrodialysis reversal (EDR process without the addition of chemicals. The reliability of the ED process makes it very attractive for water treatment. Although used mainly for brackish water desalination, ED also has certain industrial applications. Plating wash waters, cooling tower recirculation water and glass etching effluents have been treated successfully with ED for water recovery and effluent volume reduction, while ED treatment of nickel plating wash waters is an established industrial process.

  18. Efficiently Combining Water Reuse and Desalination through Forward Osmosis—Reverse Osmosis (FO-RO) Hybrids: A Critical Review

    Science.gov (United States)

    Blandin, Gaetan; Verliefde, Arne R.D.; Comas, Joaquim; Rodriguez-Roda, Ignasi; Le-Clech, Pierre

    2016-01-01

    Forward osmosis (FO) is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO) hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be a credible alternative to new desalination facilities or to implementation of stand-alone water reuse schemes. However, apart from the societal (public perception of water reuse for potable application) and water management challenges (proximity of wastewater and desalination plants), FO-RO hybrid has to overcome technical limitation such as low FO permeation flux to become economically attractive. Recent developments (i.e., improved FO membranes, use of pressure assisted osmosis, PAO) demonstrated significant improvement in water flux. However, flux improvement is associated with drawbacks, such as increased fouling behaviour, lower rejection of trace organic compounds (TrOCs) in PAO operation, and limitation in FO membrane mechanical resistance, which need to be better considered. To support successful implementation of FO-RO hybrid in the industry, further work is required regarding up-scaling to apprehend full-scale challenges in term of mass transfer limitation, pressure drop, fouling and cleaning strategies on a module scale. In addition, refined economics assessment is expected to integrate fouling and other maintenance costs/savings of the FO/PAO-RO hybrid systems, as well as cost savings from any treatment step avoided in the water recycling. PMID:27376337

  19. Efficiently Combining Water Reuse and Desalination through Forward Osmosis—Reverse Osmosis (FO-RO Hybrids: A Critical Review

    Directory of Open Access Journals (Sweden)

    Gaetan Blandin

    2016-07-01

    Full Text Available Forward osmosis (FO is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be a credible alternative to new desalination facilities or to implementation of stand-alone water reuse schemes. However, apart from the societal (public perception of water reuse for potable application and water management challenges (proximity of wastewater and desalination plants, FO-RO hybrid has to overcome technical limitation such as low FO permeation flux to become economically attractive. Recent developments (i.e., improved FO membranes, use of pressure assisted osmosis, PAO demonstrated significant improvement in water flux. However, flux improvement is associated with drawbacks, such as increased fouling behaviour, lower rejection of trace organic compounds (TrOCs in PAO operation, and limitation in FO membrane mechanical resistance, which need to be better considered. To support successful implementation of FO-RO hybrid in the industry, further work is required regarding up-scaling to apprehend full-scale challenges in term of mass transfer limitation, pressure drop, fouling and cleaning strategies on a module scale. In addition, refined economics assessment is expected to integrate fouling and other maintenance costs/savings of the FO/PAO-RO hybrid systems, as well as cost savings from any treatment step avoided in the water recycling.

  20. Efficiently Combining Water Reuse and Desalination through Forward Osmosis-Reverse Osmosis (FO-RO) Hybrids: A Critical Review.

    Science.gov (United States)

    Blandin, Gaetan; Verliefde, Arne R D; Comas, Joaquim; Rodriguez-Roda, Ignasi; Le-Clech, Pierre

    2016-07-01

    Forward osmosis (FO) is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO) hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be a credible alternative to new desalination facilities or to implementation of stand-alone water reuse schemes. However, apart from the societal (public perception of water reuse for potable application) and water management challenges (proximity of wastewater and desalination plants), FO-RO hybrid has to overcome technical limitation such as low FO permeation flux to become economically attractive. Recent developments (i.e., improved FO membranes, use of pressure assisted osmosis, PAO) demonstrated significant improvement in water flux. However, flux improvement is associated with drawbacks, such as increased fouling behaviour, lower rejection of trace organic compounds (TrOCs) in PAO operation, and limitation in FO membrane mechanical resistance, which need to be better considered. To support successful implementation of FO-RO hybrid in the industry, further work is required regarding up-scaling to apprehend full-scale challenges in term of mass transfer limitation, pressure drop, fouling and cleaning strategies on a module scale. In addition, refined economics assessment is expected to integrate fouling and other maintenance costs/savings of the FO/PAO-RO hybrid systems, as well as cost savings from any treatment step avoided in the water recycling.

  1. Water desalination using nanoporous single-layer graphene.

    Science.gov (United States)

    Surwade, Sumedh P; Smirnov, Sergei N; Vlassiouk, Ivan V; Unocic, Raymond R; Veith, Gabriel M; Dai, Sheng; Mahurin, Shannon M

    2015-05-01

    By creating nanoscale pores in a layer of graphene, it could be used as an effective separation membrane due to its chemical and mechanical stability, its flexibility and, most importantly, its one-atom thickness. Theoretical studies have indicated that the performance of such membranes should be superior to state-of-the-art polymer-based filtration membranes, and experimental studies have recently begun to explore their potential. Here, we show that single-layer porous graphene can be used as a desalination membrane. Nanometre-sized pores are created in a graphene monolayer using an oxygen plasma etching process, which allows the size of the pores to be tuned. The resulting membranes exhibit a salt rejection rate of nearly 100% and rapid water transport. In particular, water fluxes of up to 10(6) g m(-2) s(-1) at 40 °C were measured using pressure difference as a driving force, while water fluxes measured using osmotic pressure as a driving force did not exceed 70 g m(-2) s(-1) atm(-1).

  2. Water desalination using nanoporous single-layer graphene

    Science.gov (United States)

    Surwade, Sumedh P.; Smirnov, Sergei N.; Vlassiouk, Ivan V.; Unocic, Raymond R.; Veith, Gabriel M.; Dai, Sheng; Mahurin, Shannon M.

    2015-05-01

    By creating nanoscale pores in a layer of graphene, it could be used as an effective separation membrane due to its chemical and mechanical stability, its flexibility and, most importantly, its one-atom thickness. Theoretical studies have indicated that the performance of such membranes should be superior to state-of-the-art polymer-based filtration membranes, and experimental studies have recently begun to explore their potential. Here, we show that single-layer porous graphene can be used as a desalination membrane. Nanometre-sized pores are created in a graphene monolayer using an oxygen plasma etching process, which allows the size of the pores to be tuned. The resulting membranes exhibit a salt rejection rate of nearly 100% and rapid water transport. In particular, water fluxes of up to 106 g m-2 s-1 at 40 °C were measured using pressure difference as a driving force, while water fluxes measured using osmotic pressure as a driving force did not exceed 70 g m-2 s-1 atm-1.

  3. Simulation insights for graphene-based water desalination membranes.

    Science.gov (United States)

    Konatham, Deepthi; Yu, Jing; Ho, Tuan A; Striolo, Alberto

    2013-09-24

    Molecular dynamics simulations were employed to study the transport of water and ions through pores created on the basal plane of one graphene sheet (GS). Graphene pore diameters ranged from 7.5 to 14.5 Å. Different pore functionalities were considered, obtained by tethering various functional groups to the terminal carbon atoms. The ease of ion and water translocation across the pores was monitored by calculating the potential of mean force along the direction perpendicular to the GS pore. The results indicate that effective ion exclusion can be achieved only using nonfunctionalized (pristine) pores of diameter ~7.5 Å, whereas the ions can easily penetrate pristine pores of diameters ~10.5 and 14.5 Å. Carboxyl functional groups can enhance ion exclusion for all pores considered, but the effect becomes less pronounced as both the ion concentration and the pore diameter increase. When compared to a carbon nanotube of similar pore diameter, our results suggest that GS pores functionalized with COO(-) groups are more effective in excluding Cl(-) ions from passing through the membrane. Our results suggest that narrow graphene pores functionalized with hydroxyl groups remain effective at excluding Cl(-) ions even at moderate solution ionic strength. The results presented could be useful for the design of water desalination membranes.

  4. Simultaneous Desalination of Sea Water and Electricity Production with New Membrane Technology, Air-Cathode Microbial Desalination Cells

    Directory of Open Access Journals (Sweden)

    Mahdi Asadi-Ghalhari

    2015-04-01

    Full Text Available Water and energy shortages, has increased the need for methods that can provide low energy for desalination of sea water. Microbial desalination cell is one of the most important of these methods. In this study we use air cathode MDC for desalination of seawater. The maximum voltage, power and current density was 607mV, 521mW/m2 and 858mA/m2 (25mM PBS and 701mV, 695mW/m2 and 992mA/m2 (50mM PBS respectively. During the period of the voltage generation in 50mM PBS was about 1.5 times of 25mM PBS. Under this situation, EC of seawater with initial electrical conductivity declined by 48.31±3% (25mM PBS and 46.71±2.73% (50mM PBS. As well as decrease of salt from sea water in the middle chamber, EC in synthetic wastewater and catholyte slightly increased. So that Change percent of EC in synthetic wastewater was 44.20 ± 11.94(25mM PBS and 27.94 ± 3 (50 mM PBS and in catholyte was 211.66 ± 22.41(25mM PBS and 119.24 ± 11.25 (50 mM PBS respectively. These results show that the MDC can also be used as a pretreatment to reverse osmosis; simultaneously the energy required in this process is also partly meet.

  5. Economic and Policy Drivers of Agricultural Water Desalination in California's Central Valley

    Science.gov (United States)

    Welle, P.; Medellin-Azuara, J.; Viers, J. H.; Mauter, M.

    2016-12-01

    Agriculture in arid regions is threatened by the twin stresses of soil salinity and uncertain water availability. Recently, water desalination has been a proposed solution for mitigating the effects of drought, soil salinization, and the ecological impacts of agricultural drainage. In this study, we combine data from earth observing systems with auxiliary information on prices, yields, and farmer behavior in order to create a decision framework which assesses the public and private costs and benefits of distributed desalination in the Central Valley (CV) of California. The use of remotely sensed crop classifiers allows us to resolve our analysis at the 30m pixel scale across the CV, a feature that allows us to characterize regional differences in technology effectiveness. We employ environmental and economic modeling to estimate the value of lower salinity irrigation water; the value of augmented water supply under present and future climate scenarios; and the human health, environmental, and climate change damages associated with generating power to desalinate water. We find that water desalination is only likely to be profitable in 4% of the CV during periods of severe drought, and that current costs would need to decrease by 70-90% for adoption to occur on the median acre. Fossil-fuel powered desalination technologies also generate air emissions that impose significant public costs in the form of human health and climate change damages, although these damages vary greatly depending on technology. The ecosystem service benefits of reduced agricultural drainage would need to be valued between 800 and 1200 per acre-foot, or nearly the full capital and operational costs of water desalination, for the net benefits of water desalination to be positive from a societal perspective.

  6. Economic Investigation of Different Configurations of Inclined Solar Water Desalination Systems

    Directory of Open Access Journals (Sweden)

    O. Phillips Agboola

    2014-02-01

    Full Text Available This study empirically investigated the performance of four configurations of inclined solar water desalination (ISWD system for parameters such as daily production, efficiency, system cost, and distilled water production cost. The empirical findings show that in terms of daily productivity improved inclined solar water desalination (IISWD performed best with 6.41 kg/m2/day while improved inclined solar water desalination with wire mesh (IISWDWM produced the least with 3.0 kg/m2/day. In terms of cost price of the systems, the control system inclined solar water desalination (ISWD is the cheapest while IISWDWM is the most expensive system. Distilled water cost price ranges from 0.059 TL/kg, for IISWDW, to 0.134 TL/kg, for IISWDWM system. All the systems are economically and technically feasible as a solar desalination system for potable water in northern Cyprus. Potable water from vendors/hawkers ranges from 0.2 to 0.3 TL/kg.

  7. Bioluminescence-based method for measuring assimilable organic carbon in pretreatment water for reverse osmosis membrane desalination.

    Science.gov (United States)

    Weinrich, Lauren A; Schneider, Orren D; LeChevallier, Mark W

    2011-02-01

    A bioluminescence-based assimilable organic carbon (AOC) test was developed for determining the biological growth potential of seawater within the reverse osmosis desalination pretreatment process. The test uses Vibrio harveyi, a marine organism that exhibits constitutive luminescence and is nutritionally robust. AOC was measured in both a pilot plant and a full-scale desalination plant pretreatment.

  8. Bioluminescence-Based Method for Measuring Assimilable Organic Carbon in Pretreatment Water for Reverse Osmosis Membrane Desalination

    Science.gov (United States)

    Weinrich, Lauren A.; Schneider, Orren D.; LeChevallier, Mark W.

    2011-01-01

    A bioluminescence-based assimilable organic carbon (AOC) test was developed for determining the biological growth potential of seawater within the reverse osmosis desalination pretreatment process. The test uses Vibrio harveyi, a marine organism that exhibits constitutive luminescence and is nutritionally robust. AOC was measured in both a pilot plant and a full-scale desalination plant pretreatment. PMID:21148685

  9. A Novel Method for Enhancement of System Regulating Capacity by using Seawater Desalination Plant in a Small Island Power System

    Science.gov (United States)

    Yoshihara, Toru; Yokoyama, Akihiko; Imanaka, Masaki; Onda, Yusuke; Baba, Jumpei; Kuniba, Yusuke; Higa, Naoto; Asato, Sadao

    Recently, more and more unstable renewable energy based generations such as photovoltaic generations and wind turbine generations have been installed into power systems. This paper focuses a small island power system operation and proposes a novel control method of power consumption of a seawater desalination plant as a controllable load in order to secure more regulating capacity of the power system considering the customer's convenience of the desalination plant. Through a frequency analysis simulation, fuel cost can be reduced and system frequency fluctuation can be suppressed for the proposed control method of seawater desalination plant.

  10. Future Energy Benchmark for Desalination: is it Better to have a Power (electricity) Plant with ro or Med/msf?

    Science.gov (United States)

    Shahzad, Muhammad Wakil; Ng, Kim Choon; Thu, Kyaw

    2016-06-01

    Power and desalination cogeneration plants are common in many water scared courtiers. Designers and planners for cogeneration face tough challenges in deciding the options:- Is it better to operate a power plant (PP) with the reverse osmosis (i.e., PP+RO) or the thermally-driven multi-effect distillation/multi-stage flashed (PP+MED/MSF) methods. From literature, the RO methods are known to be energy efficient whilst the MED/MSF are known to have excellent thermodynamic synergies as only low pressure and temperature steam are used. Not with-standing the challenges of severe feed seawater of the Gulf, such as the frequent harmful algae blooms (HABs) and high silt contents, this presentation presents a quantitative analyses using the exergy and energetic approaches in evaluating the performances of a real cogeneration plant that was recently proposed in the eastern part of Saudi Arabia. We demonstrate that the process choice of PP+RO versus PP+MED depends on the inherent efficiencies of individual process method which is closely related to innovative process design. In this connection, a method of primary fuel cost apportionment for a co-generation plant with a MED desalination is presented. We show that an energy approach, that captures the quality of expanding steam, is a better method over the conventional work output (energetic) and the energy method seems to be over-penalizing a thermally-driven MED by as much as 22% in the operating cost of water.

  11. Future Energy Benchmark for Desalination: Is it Better to have a Power (Electricity) Plant With RO or MED/MSF?

    KAUST Repository

    Shahzad, Muhammad Wakil

    2016-06-23

    Power and desalination cogeneration plants are common in many water scared courtiers. Designers and planners for cogeneration face tough challenges in deciding the options:- Is it better to operate a power plant (PP) with the reverse osmosis (i.e., PP+RO) or the thermally-driven multi-effect distillation/multi-stage flashed ( PP+MED/MSF) methods. From literature, the RO methods are known to be energy efficient whilst the MED/MSF are known to have excellent thermodynamic synergies as only low pressure and temperature steam are used. Not with-standing the challenges of severe feed seawater of the Gulf, such as the frequent harmful algae blooms (HABs) and high silt contents, this presentation presents a quantitative analyses using the exergy and energetic approaches in evaluating the performances of a real cogeneration plant that was recently proposed in the eastern part of Saudi Arabia. We demonstrate that the process choice of PP+RO versus PP+MED depends on the inherent efficiencies of individual process method which is closely related to innovative process design. In this connection, a method of primary fuel cost apportionment for a co-generation plant with a MED desalination is presented. We show that an energy approach, that captures the quality of expanding steam, is a better method over the conventional work output (energetic) and the energy method seems to be over-penalizing a thermally-driven MED by as much as 22% in the operating cost of water.

  12. Dynamic bacterial communities on reverse-osmosis membranes in a full-scale desalination plant.

    Science.gov (United States)

    Manes, C-L de O; West, N; Rapenne, S; Lebaron, P

    2011-01-01

    To better understand biofouling of seawater reverse osmosis (SWRO) membranes, bacterial diversity was characterized in the intake water, in subsequently pretreated water and on SWRO membranes from a full-scale desalination plant (FSDP) during a 9 month period. 16S rRNA gene fingerprinting and sequencing revealed that bacterial communities in the water samples and on the SWRO membranes were very different. For the different sampling dates, the bacterial diversity of the active and the total bacterial fractions of the water samples remained relatively stable over the sampling period whereas the bacterial community structure on the four SWRO membrane samples was significantly different. The richness and evenness of the SWRO membrane bacterial communities increased with usage time with an increase in the Shannon diversity index of 2.2 to 3.7. In the oldest SWRO membrane (330 days), no single operational taxonomic unit (OTU) dominated and the majority of the OTUs fell into the Alphaproteobacteria or the Planctomycetes. In striking contrast, a Betaproteobacteria OTU affiliated to the genus Ideonella was dominant and exclusively found in the membrane used for the shortest time (10 days). This suggests that bacteria belonging to this genus could be one of the primary colonizers of the SWRO membrane. Knowledge of the dominant bacterial species on SWRO membranes and their dynamics should help guide culture studies for physiological characterization of biofilm forming species.

  13. Carbon nanotube membranes with ultrahigh specific adsorption capacity for water desalination and purification.

    Science.gov (United States)

    Yang, Hui Ying; Han, Zhao Jun; Yu, Siu Fung; Pey, Kin Leong; Ostrikov, Kostya; Karnik, Rohit

    2013-01-01

    Development of technologies for water desalination and purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation, especially for point-of-use applications. Conventional desalination methods are energy and operationally intensive, whereas adsorption-based techniques are simple and easy to use for point-of-use water purification, yet their capacity to remove salts is limited. Here we report that plasma-modified ultralong carbon nanotubes exhibit ultrahigh specific adsorption capacity for salt (exceeding 400% by weight) that is two orders of magnitude higher than that found in the current state-of-the-art activated carbon-based water treatment systems. We exploit this adsorption capacity in ultralong carbon nanotube-based membranes that can remove salt, as well as organic and metal contaminants. These ultralong carbon nanotube-based membranes may lead to next-generation rechargeable, point-of-use potable water purification appliances with superior desalination, disinfection and filtration properties.

  14. Desalination of Red Sea water using both electrodialysis and reverse osmosis as complementary methods

    Directory of Open Access Journals (Sweden)

    E.A. Abdel-Aal

    2015-03-01

    Full Text Available Desalination process separates nearly salt free water from sea or brackish water. So, desalination process is becoming a solution for water scarcity all over the world. Two membrane methods of water desalination namely electrodialysis (ED and reverse osmosis (RO are used in this study as complementary methods. The results show that both ED and RO can be used as integrated system. This system is economic and cost effective compared with each individual method provided using the ED system before the RO. In this study, it was approved that seawater can be used as it is an electrolyte. TDS of Red Sea water was decreased from 42070 ppm to 2177 ppm achieving 94.8% removal efficiency using ED for half of its optimum time. Total removal efficiency of 99.4% can be obtained using the combined system of ED and RO.

  15. Shale gas produced water treatment using innovative microbial capacitive desalination cell.

    Science.gov (United States)

    Stoll, Zachary A; Forrestal, Casey; Ren, Zhiyong Jason; Xu, Pei

    2015-01-01

    The rapid development of unconventional oil and gas production has generated large amounts of wastewater for disposal, raising significant environmental and public health concerns. Treatment and beneficial use of produced water presents many challenges due to its high concentrations of petroleum hydrocarbons and salinity. The objectives of this study were to investigate the feasibility of treating actual shale gas produced water using a bioelectrochemical system integrated with capacitive deionization-a microbial capacitive desalination cell (MCDC). Microbial degradation of organic compounds in the anode generated an electric potential that drove the desalination of produced water. Sorption and biodegradation resulted in a combined organic removal rate of 6.4 mg dissolved organic carbon per hour in the reactor, and the MCDC removed 36 mg salt per gram of carbon electrode per hour from produced water. This study is a proof-of-concept that the MCDC can be used to combine organic degradation with desalination of contaminated water without external energy input.

  16. Disinfection by-product formation during seawater desalination: A review.

    Science.gov (United States)

    Kim, Daekyun; Amy, Gary L; Karanfil, Tanju

    2015-09-15

    Due to increased freshwater demand across the globe, seawater desalination has become the technology of choice in augmenting water supplies in many parts of the world. The use of chemical disinfection is necessary in desalination plants for pre-treatment to control both biofouling as well as the post-disinfection of desalinated water. Although chlorine is the most commonly used disinfectant in desalination plants, its reaction with organic matter produces various disinfection by-products (DBPs) (e.g., trihalomethanes [THMs], haloacetic acids [HAAs], and haloacetonitriles [HANs]), and some DBPs are regulated in many countries due to their potential risks to public health. To reduce the formation of chlorinated DBPs, alternative oxidants (disinfectants) such as chloramines, chlorine dioxide, and ozone can be considered, but they also produce other types of DBPs. In addition, due to high levels of bromide and iodide concentrations in seawater, highly cytotoxic and genotoxic DBP species (i.e., brominated and iodinated DBPs) may form in distribution systems, especially when desalinated water is blended with other source waters having higher levels of organic matter. This article reviews the knowledge accumulated in the last few decades on DBP formation during seawater desalination, and summarizes in detail, the occurrence of DBPs in various thermal and membrane plants involving different desalination processes. The review also identifies the current challenges and future research needs for controlling DBP formation in seawater desalination plants and to reduce the potential toxicity of desalinated water.

  17. Bioindicators as metrics for environmental monitoring of desalination plant discharges.

    Science.gov (United States)

    de-la-Ossa-Carretero, J A; Del-Pilar-Ruso, Y; Loya-Fernández, A; Ferrero-Vicente, L M; Marco-Méndez, C; Martinez-Garcia, E; Giménez-Casalduero, F; Sánchez-Lizaso, J L

    2016-02-15

    Development of desalination projects requires simple methodologies and tools for cost-effective and environmentally-sensitive management. Sentinel taxa and biotic indices are easily interpreted in the perspective of environment management. Echinoderms are potential sentinel taxon to gauge the impact produced by brine discharge and the BOPA index is considered an effective tool for monitoring different types of impact. Salinity increase due to desalination brine discharge was evaluated in terms of these two indicators. They reflected the environmental impact and recovery after implementation of a mitigation measure. Echinoderms disappeared at the station closest to the discharge during the years with highest salinity and then recovered their abundance after installation of a diffuser reduced the salinity increase. In the same period, BOPA responded due to the decrease in sensitive amphipods and the increase in tolerant polychaete families when salinities rose. Although salinity changes explained most of the observed variability in both indicators, other abiotic parameters were also significant in explaining this variability. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Use of geothermal energy for desalination in New Mexico: a feasibility study. Final report, January 1, 1977-May 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Chaturvedi, L.; Keyes, C.G. Jr.; Swanberg, C.A.; Gupta, Y.F.; Davis, R.J.

    1979-06-01

    The water requirements and availability for New Mexico are described. The possibility of using geothermal resources for desalination of the state's saline water sources is discussed. The following aspects of the problem are covered: resource evaluation, geothermal desalination technology, potential geothermal desalination sites, saline and geothermal aquifer well fields design, geothermal desalination plant waste brine disposal, process water pumping and brine disposal unit costs, environmental considerations, and legal and institutional considerations. (MHR)

  19. Performance Measurement of Water Desalination Supply Chain Using Balanced Scorecard Model

    Directory of Open Access Journals (Sweden)

    Hasan Balfaqih

    2016-02-01

    Full Text Available The purpose of this study is to propose a theoretical framework based on a balanced scorecard (BSC for performance measurement in the water desalination supply chain (WDSC. The reason for choosing this context is that the supply chain (SC of water desalination has received a great amount of attention, due to issues related to the increased need of fresh water for agricultural, industrial and human consumptions. The research methodology is based on literature analysis concerning performance measurement and metrics, the water desalination industry and the BSC model. Different SC performance measures which related to WDSC have been reviewed and distributed into four BSC perspectives: financial, customer, internal business, and learning & growth. The article provides a structured theoretical framework specific for WDSC. This is the first developed framework in WDSC which could serve as a reference to develop applicable performance indicators, and it is expected that both researchers and practitioners would benefit from the proposed framework.

  20. Chemometric exploration of the abundance of trace metals and ions in desalinated and bottled drinking water in Kuwait.

    Science.gov (United States)

    Al-Mudhaf, Humood F; Astel, Aleksander M; Al-Hayan, Mohammad N; Abu-Shady, Abdel-Sattar I

    2014-01-01

    Chemometric exploration of desalinated and bottled water in Kuwait was employed to interpret the spatial variation in the physicochemical parameters. The data set consisted of the concentrations of principal macronutrient elements, ions, trace elements, temperature, pH, electrolytic conductivity, and total dissolved solids measured in indoor, outdoor, and bottled water samples. Quantitative assessment of the Cd, Hg, and Sb contents revealed rare cases of elevated concentrations; however, these concentrations were always below international health agency standards. Two general clusters of similar parameters were discovered in the variables mode and were associated with "natural" water characteristics or "conditions" of the pipeline system. We found that an increase in temperature facilitates the leaching of metals from the metallic equipment in the system. Spatial variation in the water quality was discovered, which indicates that residential areas fed from the Az-Zoor plant are supplied with water that contains lower concentrations of Ca, Cr, Mg, Mo, Ni, Na, TDS, and SO4 (2-) than the desalinated water produced and fed from the Doha plant. However, on the basis of the aluminum concentration in the water, cement mortar lining is assumed to be prevalent in the pipeline systems of the Mubarak Al-Kabeer, Ahmadi, Umm Al-Haiman, and Sorra areas.

  1. An investigation of desalination by nanofiltration, reverse osmosis and integrated (hybrid NF/RO) membranes employed in brackish water treatment.

    Science.gov (United States)

    Talaeipour, M; Nouri, J; Hassani, A H; Mahvi, A H

    2017-01-01

    As an appropriate tool, membrane process is used for desalination of brackish water, in the production of drinking water. The present study aims to investigate desalination processes of brackish water of Qom Province in Iran. This study was carried out at the central laboratory of Water and Wastewater Company of the studied area. To this aim, membrane processes, including nanofiltration (NF) and reverse osmosis (RO), separately and also their hybrid process were applied. Moreover, water physical and chemical parameters, including salinity, total dissolved solids (TDS), electric conductivity (EC), Na(+1) and Cl(-1) were also measured. Afterward, the rejection percent of each parameter was investigated and compared using nanofiltration and reverse osmosis separately and also by their hybrid process. The treatment process was performed by Luna domestic desalination device, which its membrane was replaced by two NF90 and TW30 membranes for nanofiltration and reverse osmosis processes, respectively. All collected brackish water samples were fed through membranes NF90-2540, TW30-1821-100(RO) and Hybrid (NF/RO) which were installed on desalination household scale pilot (Luna water 100GPD). Then, to study the effects of pressure on permeable quality of membranes, the simulation software model ROSA was applied. Results showed that percent of the salinity rejection was recorded as 50.21%; 72.82 and 78.56% in NF, RO and hybrid processes, respectively. During the study, in order to simulate the performance of nanofiltartion, reverse osmosis and hybrid by pressure drive, reverse osmosis system analysis (ROSA) model was applied. The experiments were conducted at performance three methods of desalination to remove physic-chemical parameters as percentage of rejections in the pilot plant are: in the NF system the salinity 50.21, TDS 43.41, EC 43.62, Cl 21.1, Na 36.15, and in the RO membrane the salinity 72.02, TDS 60.26, EC 60.33, Cl 43.08, Na 54.41. Also in case of the rejection

  2. A Cost Effective Desalination Plant Using a Solar Chimney with Recycled Aluminum Can Collector

    Directory of Open Access Journals (Sweden)

    Singuru Rajesh

    2016-01-01

    Full Text Available The main objective of the work was to use solar energy for desalination of water. A solar chimney desalination system, which includes the solar chimney, solar collector, evaporation system, and passive condenser, was designed and built. The air enters into collector and gets heated and released at the bottom of chimney. Due to draught effect dry air goes upward. The air is humidified by spraying salt water into the hot air stream using a mistifier at the middle of chimney. Then, the partial vapours contained in the air are condensed to give desalinated water. The performance of the integrated system including power and potable water production was estimated and the results were discussed. With a 3.4 m height setup, experimental test rig was capable of evaporating 3.77 L water daily condensing 2.3 L water. It is compact in nature as it is easy to assemble and dissemble. It can be used for purifying rain water in summer under rain water harvesting. Because of using country wood, recycled Al cans, and GI sheet in fabrication, it is lower in cost.

  3. Review on the science and technology of water desalination by capacitive deionization

    NARCIS (Netherlands)

    Porada, S.; Zhao, R.; Wal, van der A.; Presser, V.; Biesheuvel, P.M.

    2013-01-01

    Porous carbon electrodes have significant potential for energy-efficient water desalination using a promising technology called Capacitive Deionization (CDI). In CDI, salt ions are removed from brackish water upon applying an electrical voltage difference between two porous electrodes, in which the

  4. Integrated Wireless Monitoring and Control System in Reverse Osmosis Membrane Desalination Plants

    Directory of Open Access Journals (Sweden)

    Al Haji Ahmad

    2015-01-01

    Full Text Available The operational processes of the Reverse Osmosis (RO membrane desalination plants require continuous monitoring through the constant attendance of operators to ensure proper productivity and minimize downtime and prevent membrane failure. Therefore, the plant must be equipped with a control system that monitors and controls the operational variables. Monitoring and controlling the affecting parameters are critical to the evaluation of the performance of the desalination plant, which will help the operator find and resolve problems immediately. Therefore, this paper was aimed at developing an RO unit by utilizing a wireless sensor network (WSN system. Hence, an RO pilot plant with a feed capacity of 1.2 m3/h was utilized, commissioned, and tested in Kuwait to assess and verify the performance of the integrated WSN in RO membrane desalination system. The investigated system allowed the operators to remotely monitor the operational process of the RO system. The operational data were smoothly recorded and monitored. Furthermore, the technical problems were immediately determined, which reduced the time and effort in rectifying the technical problems relevant to the RO performance. The manpower requirements of such treatment system were dramatically reduced by about 50%. Based on a comparison between manual and wireless monitoring operational processes, the availability of the integrated RO unit with a wireless monitoring was increased by 10%

  5. CSP cogeneration of electricity and desalinated water at the Pentakomo field facility

    Science.gov (United States)

    Papanicolas, C. N.; Bonanos, A. M.; Georgiou, M. C.; Guillen, E.; Jarraud, N.; Marakkos, C.; Montenon, A.; Stiliaris, E.; Tsioli, E.; Tzamtzis, G.; Votyakov, E. V.

    2016-05-01

    The Cyprus Institute's Pentakomo Field Facility (PFF) is a major infrastructure for research, development and testing of technologies relating to concentrated solar power (CSP) and solar seawater desalination. It is located at the south coast of Cyprus near the sea and its environmental conditions are fully monitored. It provides a test facility specializing in the development of CSP systems suitable for island and coastal environments with particular emphasis on small units (electricity and desalinated seawater from CSP. Specifically, the experimental plant consists of a heliostat-central receiver system for solar harvesting, thermal energy storage in molten salts followed by a Rankine cycle for electricity production and a multiple-effect distillation (MED) unit for desalination.

  6. A computational assessment of the permeability and salt rejection of carbon nanotube membranes and their application to water desalination.

    Science.gov (United States)

    Thomas, Michael; Corry, Ben

    2016-02-13

    Membranes made from nanomaterials such as nanotubes and graphene have been suggested to have a range of applications in water filtration and desalination, but determining their suitability for these purposes requires an accurate assessment of the properties of these novel materials. In this study, we use molecular dynamics simulations to determine the permeability and salt rejection capabilities for membranes incorporating carbon nanotubes (CNTs) at a range of pore sizes, pressures and concentrations. We include the influence of osmotic gradients and concentration build up and simulate at realistic pressures to improve the reliability of estimated membrane transport properties. We find that salt rejection is highly dependent on the applied hydrostatic pressure, meaning high rejection can be achieved with wider tubes than previously thought; while membrane permeability depends on salt concentration. The ideal size of the CNTs for desalination applications yielding high permeability and high salt rejection is found to be around 1.1 nm diameter. While there are limited energy gains to be achieved in using ultra-permeable CNT membranes in desalination by reverse osmosis, such membranes may allow for smaller plants to be built as is required when size or weight must be minimized. There are diminishing returns in further increasing membrane permeability, so efforts should focus on the fabrication of membranes containing narrow or functionalized CNTs that yield the desired rejection or selection properties rather than trying to optimize pore densities.

  7. Composition and Variability of Biofouling Organisms in Seawater Reverse Osmosis Desalination Plants ▿ †

    Science.gov (United States)

    Zhang, Minglu; Jiang, Sunny; Tanuwidjaja, Dian; Voutchkov, Nikolay; Hoek, Eric M. V.; Cai, Baoli

    2011-01-01

    Seawater reverse osmosis (SWRO) membrane biofouling remains a common challenge in the desalination industry, but the marine bacterial community that causes membrane fouling is poorly understood. Microbial communities at different stages of treatment processes (intake, cartridge filtration, and SWRO) of a desalination pilot plant were examined by both culture-based and culture-independent approaches. Bacterial isolates were identified to match the genera Shewanella, Alteromonas, Vibrio, and Cellulophaga based on 16S rRNA gene sequencing analysis. The 16S rRNA gene clone library of the SWRO membrane biofilm showed that a filamentous bacterium, Leucothrix mucor, which belongs to the gammaproteobacteria, accounted for nearly 30% of the clone library, while the rest of the microorganisms (61.2% of the total clones) were related to the alphaproteobacteria. 16S rRNA gene terminal restriction fragment length polymorphism (T-RFLP) analysis indicated that bacteria colonizing the SWRO membrane represented a subportion of microbes in the source seawater; however, they were quite different from those colonizing the cartridge filter. The examination of five SWRO membranes from desalination plants located in different parts of the world showed that although the bacterial communities from the membranes were not identical to each other, some dominant bacteria were commonly observed. In contrast, bacterial communities in source seawater were significantly different based on location and season. Microbial profiles from 14 cartridge filters collected from different plants also revealed spatial trends. PMID:21551282

  8. Composition and variability of biofouling organisms in seawater reverse osmosis desalination plants.

    Science.gov (United States)

    Zhang, Minglu; Jiang, Sunny; Tanuwidjaja, Dian; Voutchkov, Nikolay; Hoek, Eric M V; Cai, Baoli

    2011-07-01

    Seawater reverse osmosis (SWRO) membrane biofouling remains a common challenge in the desalination industry, but the marine bacterial community that causes membrane fouling is poorly understood. Microbial communities at different stages of treatment processes (intake, cartridge filtration, and SWRO) of a desalination pilot plant were examined by both culture-based and culture-independent approaches. Bacterial isolates were identified to match the genera Shewanella, Alteromonas, Vibrio, and Cellulophaga based on 16S rRNA gene sequencing analysis. The 16S rRNA gene clone library of the SWRO membrane biofilm showed that a filamentous bacterium, Leucothrix mucor, which belongs to the gammaproteobacteria, accounted for nearly 30% of the clone library, while the rest of the microorganisms (61.2% of the total clones) were related to the alphaproteobacteria. 16S rRNA gene terminal restriction fragment length polymorphism (T-RFLP) analysis indicated that bacteria colonizing the SWRO membrane represented a subportion of microbes in the source seawater; however, they were quite different from those colonizing the cartridge filter. The examination of five SWRO membranes from desalination plants located in different parts of the world showed that although the bacterial communities from the membranes were not identical to each other, some dominant bacteria were commonly observed. In contrast, bacterial communities in source seawater were significantly different based on location and season. Microbial profiles from 14 cartridge filters collected from different plants also revealed spatial trends.

  9. Shale gas produced water treatment using innovative microbial capacitive desalination cell

    Energy Technology Data Exchange (ETDEWEB)

    Stoll, Zachary A. [New Mexico State University, Las Cruces, NM 88003 (United States); Forrestal, Casey [University of Colorado Boulder, Boulder, CO 80309 (United States); Ren, Zhiyong Jason, E-mail: jason.ren@colorado.edu [University of Colorado Boulder, Boulder, CO 80309 (United States); Xu, Pei, E-mail: wxpei@hotmail.com [New Mexico State University, Las Cruces, NM 88003 (United States)

    2015-02-11

    Highlights: • Actual shale gas produced water was treated with no external energy input. • Biodegradation of organics generated stable voltages for desalination. • On average, 36 mg TDS per g activated carbon was removed in 1 h. • A maximum organic removal rate of 6.4 mg DOC per hour was achieved in the reactor. - Abstract: The rapid development of unconventional oil and gas production has generated large amounts of wastewater for disposal, raising significant environmental and public health concerns. Treatment and beneficial use of produced water presents many challenges due to its high concentrations of petroleum hydrocarbons and salinity. The objectives of this study were to investigate the feasibility of treating actual shale gas produced water using a bioelectrochemical system integrated with capacitive deionization—a microbial capacitive desalination cell (MCDC). Microbial degradation of organic compounds in the anode generated an electric potential that drove the desalination of produced water. Sorption and biodegradation resulted in a combined organic removal rate of 6.4 mg dissolved organic carbon per hour in the reactor, and the MCDC removed 36 mg salt per gram of carbon electrode per hour from produced water. This study is a proof-of-concept that the MCDC can be used to combine organic degradation with desalination of contaminated water without external energy input.

  10. Tunable, Strain-Controlled Nanoporous MoS₂ Filter for Water Desalination.

    Science.gov (United States)

    Li, Weifeng; Yang, Yanmei; Weber, Jeffrey K; Zhang, Gang; Zhou, Ruhong

    2016-02-23

    The deteriorating state of global fresh water resources represents one of the most serious challenges that scientists and policymakers currently face. Desalination technologies, which are designed to extract potable water from the planet's bountiful stores of seawater, could serve to alleviate much of the stress that presently plagues fresh water supplies. In recent decades, desalination methods have improved via water-filtering architectures based on nanoporous graphene filters and artificial membranes integrated with biological water channels. Here, we report the auspicious performance (in simulations) of an alternative nanoporous desalination filter constructed from a MoS2 nanosheet. In striking contrast to graphene-based filters, we find that the "open" and "closed" states of the MoS2 filter can be regulated by the introduction of mechanical strain, yielding a highly tunable nanopore interface. By applying lateral strain to the MoS2 filter in our simulations, we see that the transition point between "open" and "closed" states occurs under tension that induces about 6% cross-sectional expansion in the membrane (6% strain); the open state of the MoS2 filter demonstrates high water transparency and a strong salt filtering capability even under 12% strain. Our results thus demonstrate the promise of a controllable nanoporous MoS2 desalination filter, wherein the morphology and size of the central nanopore can be precisely regulated by tensile strain. These findings support the design and proliferation of tunable nanodevices for filtration and other applications.

  11. Reducing the impact of a desalination plant using stochastic modeling and optimization techniques

    Science.gov (United States)

    Alcolea, Andres; Renard, Philippe; Mariethoz, Gregoire; Bertone, François

    2009-02-01

    SummaryWater is critical for economic growth in coastal areas. In this context, desalination has become an increasingly important technology over the last five decades. It often has environmental side effects, especially when the input water is pumped directly from the sea via intake pipelines. However, it is generally more efficient and cheaper to desalt brackish groundwater from beach wells rather than desalting seawater. Natural attenuation is also gained and hazards due to anthropogenic pollution of seawater are reduced. In order to minimize allocation and operational costs and impacts on groundwater resources, an optimum pumping network is required. Optimization techniques are often applied to this end. Because of aquifer heterogeneity, designing the optimum pumping network demands reliable characterizations of aquifer parameters. An optimum pumping network in a coastal aquifer in Oman, where a desalination plant currently pumps brackish groundwater at a rate of 1200 m 3/h for a freshwater production of 504 m 3/h (insufficient to satisfy the growing demand in the area) was designed using stochastic inverse modeling together with optimization techniques. The Monte Carlo analysis of 200 simulations of transmissivity and storage coefficient fields conditioned to the response to stresses of tidal fluctuation and three long term pumping tests was performed. These simulations are physically plausible and fit the available data well. Simulated transmissivity fields are used to design the optimum pumping configuration required to increase the current pumping rate to 9000 m 3/h, for a freshwater production of 3346 m 3/h (more than six times larger than the existing one). For this task, new pumping wells need to be sited and their pumping rates defined. These unknowns are determined by a genetic algorithm that minimizes a function accounting for: (1) drilling, operational and maintenance costs, (2) target discharge and minimum drawdown (i.e., minimum aquifer

  12. Microbial electrodialysis cell for simultaneous water desalination and hydrogen gas production.

    Science.gov (United States)

    Mehanna, Maha; Kiely, Patrick D; Call, Douglas F; Logan, Bruce E

    2010-12-15

    A new approach to water desalination is to use exoelectrogenic bacteria to generate electrical power from the biodegradation of organic matter, moving charged ions from a middle chamber between two membranes in a type of microbial fuel cell called a microbial desalination cell. Desalination efficiency using this approach is limited by the voltage produced by the bacteria. Here we examine an alternative strategy based on boosting the voltage produced by the bacteria to achieve hydrogen gas evolution from the cathode using a three-chambered system we refer to as a microbial electrodialysis cell (MEDC). We examined the use of the MEDC process using two different initial NaCl concentrations of 5 g/L and 20 g/L. Conductivity in the desalination chamber was reduced by up to 68 ± 3% in a single fed-batch cycle, with electrical energy efficiencies reaching 231 ± 59%, and maximum hydrogen production rates of 0.16 ± 0.05 m(3) H(2)/m(3) d obtained at an applied voltage of 0.55 V. The advantage of this system compared to a microbial fuel cell approach is that the potentials between the electrodes can be better controlled, and the hydrogen gas that is produced can be used to recover energy to make the desalination process self-sustaining with respect to electrical power requirements.

  13. Microbial Electrodialysis Cell for Simultaneous Water Desalination and Hydrogen Gas Production

    KAUST Repository

    Mehanna, Maha

    2010-12-15

    A new approach to water desalination is to use exoelectrogenic bacteria to generate electrical power from the biodegradation of organic matter, moving charged ions from a middle chamber between two membranes in a type of microbial fuel cell called a microbial desalination cell. Desalination efficiency using this approach is limited by the voltage produced by the bacteria. Here we examine an alternative strategy based on boosting the voltage produced by the bacteria to achieve hydrogen gas evolution from the cathode using a three-chambered system we refer to as a microbial electrodialysis cell (MEDC). We examined the use of the MEDC process using two different initial NaCl concentrations of 5 g/L and 20 g/L. Conductivity in the desalination chamber was reduced by up to 68 ± 3% in a single fed-batch cycle, with electrical energy efficiencies reaching 231 ± 59%, and maximum hydrogen production rates of 0.16 ± 0.05 m3 H2/m3 d obtained at an applied voltage of 0.55 V. The advantage of this system compared to a microbial fuel cell approach is that the potentials between the electrodes can be better controlled, and the hydrogen gas that is produced can be used to recover energy to make the desalination process self-sustaining with respect to electrical power requirements. © 2010 American Chemical Society.

  14. Energy optimization of Llobregat Desalination Plant by ERD; Optimizacion energetica de la Desalinizadora del Llobregat mediante sistemas de intercambio de presion

    Energy Technology Data Exchange (ETDEWEB)

    Miguel, C.; Cazurra, T.; Jurado, J. L.; Orbe, H.; Sanz, M. A.; Icaza, G.; Galtes, J.

    2009-07-01

    Construction of the Llobregat desalination seawater reverse osmosis (SWRO) plant will represent the guarantee of drinking water supply in the entire network managed by Aigues Ter Llobregat. The biggest cost associated to the drinking water supply produced by means of SWRO is mainly due to the necessary high operating pressures at the inlet of membranes. Due to this reality, Llobregat Desalination Plant incorporates the most state of the art and efficient technologies available, with the aim on minimizing the energy consumption. As a a result, one of the fundamental parts of these technologies are the Energy Recovery Devices (ERD), which recover the remaining energy (as a pressure form) in the brine out from the reverse osmosis, transferring this pressure to part of seawater feed towards the membranes, reducing the needs of energy consumption and the size the high pressure pump. (Author) 6 refs.

  15. Operational Optimization of Large-Scale Parallel-Unit SWRO Desalination Plant Using Differential Evolution Algorithm

    Directory of Open Access Journals (Sweden)

    Jian Wang

    2014-01-01

    Full Text Available A large-scale parallel-unit seawater reverse osmosis desalination plant contains many reverse osmosis (RO units. If the operating conditions change, these RO units will not work at the optimal design points which are computed before the plant is built. The operational optimization problem (OOP of the plant is to find out a scheduling of operation to minimize the total running cost when the change happens. In this paper, the OOP is modelled as a mixed-integer nonlinear programming problem. A two-stage differential evolution algorithm is proposed to solve this OOP. Experimental results show that the proposed method is satisfactory in solution quality.

  16. Theory of Water Desalination by Porous Electrodes with Immobile Chemical Charge

    NARCIS (Netherlands)

    Biesheuvel, P.M.; Hamelers, H.V.M.; Suss, M.E.

    2015-01-01

    In capacitive deionization (CDI), water is desalinated by storing ions in electrical double layers (EDLs) within the micropores of charged porous carbon electrodes. Recent experiments using chemically modified electrodes have shown differing, novel phenomena such as "inverted CDI," "enhanced CDI,

  17. Coal Gangue Water Instead of Raw Water Desalination System Water Test Ssummary%煤矸水代替原水制脱盐水试验

    Institute of Scientific and Technical Information of China (English)

    栗振翩

    2012-01-01

      To ensure that my company in 0# line raw water water off the water desalination water under standing for water, reduce the risk of parking system plan,using the phase ii desalination water station for coal gangue instead of raw water from water desalination water test. Through the of the original water and coal bottles of water quality analysis, part of the use of coal gangue until all water desalination is water, and prove the second phase water desalination using coal gangue is standing water desalination the feasibility of the water, and put forward the improvement measures.%  为保证神木化工公司在原水中断的情况下脱盐水站有原水供应,减少系统非计划停车的风险,利用二期脱盐水站进行了煤矸水代替原水制取脱盐水的试验研究。通过对原水和煤矸水水质的分析,部分利用直至全部利用煤矸水制取脱盐水,证明了二期脱盐水站用煤矸水制取脱盐水的可行性,并提出改进措施。

  18. Efficiently Combining Water Reuse and Desalination through Forward Osmosis—Reverse Osmosis (FO-RO) Hybrids: A Critical Review

    OpenAIRE

    Gaetan Blandin; Verliefde, Arne R.D.; Joaquim Comas; Ignasi Rodriguez-Roda; Pierre Le-Clech

    2016-01-01

    Forward osmosis (FO) is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO) hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be ...

  19. Experimental benchmarks and simulation of GAMMA-T for overcooling and undercooling transients in HTGRs coupled with MED desalination plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Sik, E-mail: hskim25@kaist.ac.kr [Korea Advanced Institute of Science and Technology (KAIST), Department of Nuclear and Quantum Engineering, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kim, In Hun, E-mail: nuclea@kaist.ac.kr [Korea Advanced Institute of Science and Technology (KAIST), Department of Nuclear and Quantum Engineering, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); NO, Hee Cheon, E-mail: hcno@kaist.ac.kr [Korea Advanced Institute of Science and Technology (KAIST), Department of Nuclear and Quantum Engineering, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Jin, Hyung Gon, E-mail: gonijin@gmail.com [Korea Advanced Institute of Science and Technology (KAIST), Department of Nuclear and Quantum Engineering, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2013-06-15

    Highlights: ► The GAMMA-T code was well validated through benchmark experiments. ► Based on the KAIST coupling scheme, the GTHTR300 + MED systems were made. ► Safety analysis was performed for overcooling and undercooling accidents. ► In all accidents, maximum peak fuel temperatures were well below than 1600 °C. ► In all accidents, the HTGR + MED system could be operated continuously. -- Abstracts: The nuclear desalination based on the high temperature gas-cooled reactor (HTGR) with gas turbomachinery and multi-effect distillation (MED) is attracting attention because the coupling system can utilize the waste heat of the nuclear power system for the MED desalination system. In previous work, KAIST proposed the new HTGR + MED coupling scheme, evaluated desalination performance, and performed cost analysis for the system. In this paper, in order to confirm the safety and the performance of the coupling system, we performed the transient analysis with GAMMA-T (GAs Multidimensional Multicomponent mixture Analysis–Turbomachinery) code for the KAIST HTGR + MED systems. The experimental benchmarks of GAMMA-T code were set up before the transient analysis for several accident scenarios. The GAMMA-T code was well validated against steady state and transient scenarios of the He–Water test loop such as changes in water mass flow rate and water inlet temperatures. Then, for transient analysis, the GTHTR300 was chosen as a reference plant. The GTHTR300 + MED systems were made, based on the KAIST HTGR + MED coupling scheme. Transient analysis was performed for three kinds of accidents scenarios: (1) loss of heat rejection through MED plant, (2) loss of heat rejection through heat sink, and (3) overcooling due to abnormal cold temperature of seawater. In all kinds of accident scenarios, maximum peak fuel temperatures were well below than the fuel failure criterion, 1600 °C and the GTHTR300 + MED system could be operated continuously and safely. Specially, in the

  20. Experimental Analysis of Desalination Unit Coupled with Solar Water Lens Concentrator

    Science.gov (United States)

    Chaithanya, K. K.; Rajesh, V. R.; Suresh, Rahul

    2016-09-01

    The main problem that the world faces in this scenario is shortage of potable water. Hence this research work rivets to increase the yield of desalination system in an economical way. The integration of solar concentrator and desalination unit can project the desired yield, but the commercially available concentrated solar power technologies (CSP) are not economically viable. So this study proposes a novel method to concentrate ample amount of solar radiation in a cost effective way. Water acting as lens is a highlighted technology initiated in this work, which can be a substitute for CSP systems. And water lens can accelerate the desalination process so as to increase the yield economically. The solar irradiance passing through the water will be concentrated at a focal point, and the concentration depends on curvature of water lens. The experimental analysis of water lens makes use of transparent thin sheet, supported on a metallic structure. The Plano convex shape of water lens is developed by varying the volume of water that is being poured on the transparent thin sheet. From the experimental analysis it is inferred that, as the curvature of water lens increases, solar irradiance can be focused more accurately on to the focus and a higher water temperature is obtained inside the solar still.

  1. Minimum energy requirement of an endoreversible desalination system of sea water

    Directory of Open Access Journals (Sweden)

    Lingen Chen, Liwei Shu, Yanlin Ge, Fengrui Sun

    2015-01-01

    Full Text Available A model of a typical endoreversible desalination system of sea water is established and the minimum energy requirement for the system is optimized by using finite time thermodynamic theory. The heat exchange between the endoreversible desalination system of sea water and surroundings are delivered by two endoreversible Carnot heat pumps and three endoreversible Carnot heat engines. The minimum energy requirement for the system can be found by subtracting the power outputs from the power inputs. The results show that the minimum energy requirement for the distillation system depends on not only the properties of the input saline water, the output pure water and the brine water, but also the inherent features of the heat pumps and the heat engines, i.e. the total heat conductance of the heat pumps and of the heat engines. The results obtained herein are closer to those of practical system than those obtained based on reversible model.

  2. Fast Water Thermo-pumping Flow Across Nanotube Membranes for Desalination.

    Science.gov (United States)

    Zhao, Kuiwen; Wu, Huiying

    2015-06-10

    Development of high-efficiency and low-cost seawater desalination technologies is critical to meet global water crisis. Here we report a fast water pumping method in which the water molecules in seawater are continuously pumped across nanotube membranes driven by a small temperature difference, opening the possibility of high-throughput small-scale desalination devices driven by low-grade thermal energy. Using molecular dynamics simulations, we show that an equivalent driving pressure of 5.3 MPa is achieved with a temperature difference of only 15 K. The remarkable water pumping ability is attributed to the asymmetric thermal fluctuation of water molecules. With this method, a 10 cm(2) nanotube membrane with 1.5 × 10(13) pores per cm(2) will produce freshwater with a flow rate of 7.77 L/h under a small temperature difference of 15 K.

  3. Linking near- and far-field hydrodynamic models for simulation of desalination plant brine discharges.

    Science.gov (United States)

    Botelho, D A; Barry, M E; Collecutt, G C; Brook, J; Wiltshire, D

    2013-01-01

    A desalination plant is proposed to be the major water supply to the Olympic Dam Expansion Mining project. Located in the Upper Spencer Gulf, South Australia, the site was chosen due to the existence of strong currents and their likely advantages in terms of mixing and dilution of discharged return water. A high-resolution hydrodynamic model (Estuary, Lake and Coastal Ocean Model, ELCOM) was constructed and, through a rigorous review process, was shown to reproduce the intricate details of the Spencer Gulf dynamics, including those characterising the discharge site. Notwithstanding this, it was found that deploying typically adopted 'direct insertion' techniques to simulate the brine discharge within the hydrodynamic model was problematic. Specifically, it was found that in this study the direct insertion technique delivered highly conservative brine dilution predictions in and around the proposed site, and that these were grid and time-step dependent. To improve the predictive capability, a strategy to link validated computational fluid dynamics (CFD) predictions to hydrodynamic simulations was devised. In this strategy, environmental conditions from ELCOM were used to produce boundary conditions for execution of a suite of CFD simulations. In turn, the CFD simulations provided the brine dilutions and flow rates to be applied in ELCOM. In order to conserve mass in a system-wide sense, artificial salt sinks were introduced to the ELCOM model such that salt quantities were conserved. As a result of this process, ELCOM predictions were naturally very similar to CFD predictions near the diffuser, whilst at the same time they produced an area of influence (further afield) comparable to direct insertion methods. It was concluded that the linkage of the models, in comparison to direct insertion methods, constituted a more realistic and defensible alternative to predict the far-field dispersion of outfall discharges, particularly with regards to the estimation of brine

  4. Graphene oxide-based efficient and scalable solar desalination under one sun with a confined 2D water path.

    Science.gov (United States)

    Li, Xiuqiang; Xu, Weichao; Tang, Mingyao; Zhou, Lin; Zhu, Bin; Zhu, Shining; Zhu, Jia

    2016-12-06

    Because it is able to produce desalinated water directly using solar energy with minimum carbon footprint, solar steam generation and desalination is considered one of the most important technologies to address the increasingly pressing global water scarcity. Despite tremendous progress in the past few years, efficient solar steam generation and desalination can only be achieved for rather limited water quantity with the assistance of concentrators and thermal insulation, not feasible for large-scale applications. The fundamental paradox is that the conventional design of direct absorber-bulk water contact ensures efficient energy transfer and water supply but also has intrinsic thermal loss through bulk water. Here, enabled by a confined 2D water path, we report an efficient (80% under one-sun illumination) and effective (four orders salinity decrement) solar desalination device. More strikingly, because of minimized heat loss, high efficiency of solar desalination is independent of the water quantity and can be maintained without thermal insulation of the container. A foldable graphene oxide film, fabricated by a scalable process, serves as efficient solar absorbers (>94%), vapor channels, and thermal insulators. With unique structure designs fabricated by scalable processes and high and stable efficiency achieved under normal solar illumination independent of water quantity without any supporting systems, our device represents a concrete step for solar desalination to emerge as a complementary portable and personalized clean water solution.

  5. Indirect desalination of Red Sea water with forward osmosis and low pressure reverse osmosis for water reuse

    KAUST Repository

    Yangali-Quintanilla, Victor

    2011-10-01

    The use of energy still remains the main component of the costs of desalting water. Forward osmosis (FO) can help to reduce the costs of desalination, and extracting water from impaired sources can be beneficial in this regard. Experiments with FO membranes using a secondary wastewater effluent as a feed water and Red Sea water as a draw solution demonstrated that the technology is promising. FO coupled with low pressure reverse osmosis (LPRO) was implemented for indirect desalination. The system consumes only 50% (~1.5 kWh/m3) of the energy used for high pressure seawater RO (SWRO) desalination (2.5-4 kWh/m3), and produces a good quality water extracted from the impaired feed water. Fouling of the FO membranes was not a major issue during long-term experiments over 14 days. After 10 days of continuous FO operation, the initial flux declined by 28%. Cleaning the FO membranes with air scouring and clean water recovered the initial flux by 98.8%. A cost analysis revealed FO per se as viable technology. However, a minimum average FO flux of 10.5 L/m2-h is needed to compete with water reuse using UF-LPRO, and 5.5 L/m2-h is needed to recover and desalinate water at less cost than SWRO. © 2011 Elsevier B.V.

  6. Particulate-free porous silicon networks for efficient capacitive deionization water desalination

    Science.gov (United States)

    Metke, Thomas; Westover, Andrew S.; Carter, Rachel; Oakes, Landon; Douglas, Anna; Pint, Cary L.

    2016-01-01

    Energy efficient water desalination processes employing low-cost and earth-abundant materials is a critical step to sustainably manage future human needs for clean water resources. Here we demonstrate that porous silicon – a material harnessing earth abundance, cost, and environmental/biological compatibility is a candidate material for water desalination. With appropriate surface passivation of the porous silicon material to prevent surface corrosion in aqueous environments, we show that porous silicon templates can enable salt removal in capacitive deionization (CDI) ranging from 0.36% by mass at the onset from fresh to brackish water (10 mM, or 0.06% salinity) to 0.52% in ocean water salt concentrations (500 mM, or ~0.3% salinity). This is on par with reports of most carbon nanomaterial based CDI systems based on particulate electrodes and covers the full salinity range required of a CDI system with a total ocean-to-fresh water required energy input of ~1.45 Wh/L. The use of porous silicon for CDI enables new routes to directly couple water desalination technology with microfluidic systems and photovoltaics that natively use silicon materials, while mitigating adverse effects of water contamination occurring from nanoparticulate-based CDI electrodes. PMID:27101809

  7. Super square carbon nanotube network: a new promising water desalination membrane

    Science.gov (United States)

    Sun, Ligang; He, Xiaoqiao; Lu, Jian

    2016-04-01

    Super square (SS) carbon nanotube (CNT) networks, acting as a new kind of nanoporous membrane, manifest excellent water desalination performance. Nanopores in SS CNT network can efficiently filter NaCl from water. The water desalination ability of such nanoporous membranes critically depends on the pore diameter, permitting water molecule permeatration while salt ion obstruction. On the basis of the systematical analysis on the interaction among water permeability, salt concentration limit and pressure on the membranes, an empirical formula is developed to describe the relationship between pressure and concentration limit. In the meantime, the nonlinear relationship between pressure and water permeability is examined. Hence, by controlling pressure, optimal plan can be easily made to efficiently filter the saltwater. Moreover, steered molecular dynamics (MD) method uncovers bending and local buckling of SS CNT network that leads to salt ions passing through membranes. These important mechanical behaviours are neglected in most MD simulations, which may overestimate the filtration ability. Overall, water permeability of such material is several orders of magnitude higher than the conventional reverse osmosis membranes and several times higher than nanoporous graphene membranes. SS CNT networks may act as a new kind of membrane developed for water desalination with excellent filtration ability.

  8. Particulate-free porous silicon networks for efficient capacitive deionization water desalination.

    Science.gov (United States)

    Metke, Thomas; Westover, Andrew S; Carter, Rachel; Oakes, Landon; Douglas, Anna; Pint, Cary L

    2016-04-22

    Energy efficient water desalination processes employing low-cost and earth-abundant materials is a critical step to sustainably manage future human needs for clean water resources. Here we demonstrate that porous silicon - a material harnessing earth abundance, cost, and environmental/biological compatibility is a candidate material for water desalination. With appropriate surface passivation of the porous silicon material to prevent surface corrosion in aqueous environments, we show that porous silicon templates can enable salt removal in capacitive deionization (CDI) ranging from 0.36% by mass at the onset from fresh to brackish water (10 mM, or 0.06% salinity) to 0.52% in ocean water salt concentrations (500 mM, or ~0.3% salinity). This is on par with reports of most carbon nanomaterial based CDI systems based on particulate electrodes and covers the full salinity range required of a CDI system with a total ocean-to-fresh water required energy input of ~1.45 Wh/L. The use of porous silicon for CDI enables new routes to directly couple water desalination technology with microfluidic systems and photovoltaics that natively use silicon materials, while mitigating adverse effects of water contamination occurring from nanoparticulate-based CDI electrodes.

  9. Particulate-free porous silicon networks for efficient capacitive deionization water desalination

    Science.gov (United States)

    Metke, Thomas; Westover, Andrew S.; Carter, Rachel; Oakes, Landon; Douglas, Anna; Pint, Cary L.

    2016-04-01

    Energy efficient water desalination processes employing low-cost and earth-abundant materials is a critical step to sustainably manage future human needs for clean water resources. Here we demonstrate that porous silicon – a material harnessing earth abundance, cost, and environmental/biological compatibility is a candidate material for water desalination. With appropriate surface passivation of the porous silicon material to prevent surface corrosion in aqueous environments, we show that porous silicon templates can enable salt removal in capacitive deionization (CDI) ranging from 0.36% by mass at the onset from fresh to brackish water (10 mM, or 0.06% salinity) to 0.52% in ocean water salt concentrations (500 mM, or ~0.3% salinity). This is on par with reports of most carbon nanomaterial based CDI systems based on particulate electrodes and covers the full salinity range required of a CDI system with a total ocean-to-fresh water required energy input of ~1.45 Wh/L. The use of porous silicon for CDI enables new routes to directly couple water desalination technology with microfluidic systems and photovoltaics that natively use silicon materials, while mitigating adverse effects of water contamination occurring from nanoparticulate-based CDI electrodes.

  10. Bounding the marginal cost of producing potable water including the use of seawater desalinization as a backstop potable water production technology

    Energy Technology Data Exchange (ETDEWEB)

    Dooley, James J.

    2014-04-01

    The analysis presented in this technical report should allow for the creation of high, medium, and low cost potable water prices for GCAM. Seawater reverse osmosis (SWRO) based desalinization should act as a backstop for the cost of producing potable water (i.e., the literature seems clear that SWRO should establish an upper bound for the plant gate cost of producing potable water). Transporting water over significant distances and having to lift water to higher elevations to reach end-users can also have a significant impact on the cost of producing water. The three potable fresh water scenarios describe in this technical report are: low cost water scenario ($0.10/m3); medium water cost scenario ($1.00/m3); and high water cost scenario ($2.50/m3).

  11. Water permeability of nanoporous graphene at realistic pressures for reverse osmosis desalination

    Energy Technology Data Exchange (ETDEWEB)

    Cohen-Tanugi, David; Grossman, Jeffrey C. [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2014-08-21

    Nanoporous graphene (NPG) shows tremendous promise as an ultra-permeable membrane for water desalination thanks to its atomic thickness and precise sieving properties. However, a significant gap exists in the literature between the ideal conditions assumed for NPG desalination and the physical environment inherent to reverse osmosis (RO) systems. In particular, the water permeability of NPG has been calculated previously based on very high pressures (1000–2000 bars). Does NPG maintain its ultrahigh water permeability under real-world RO pressures (<100 bars)? Here, we answer this question by drawing results from molecular dynamics simulations. Our results indicate that NPG maintains its ultrahigh permeability even at low pressures, allowing a permeate water flux of 6.0 l/h-bar per pore, or equivalently 1041 ± 20 l/m{sup 2}-h-bar assuming a nanopore density of 1.7 × 10{sup 13} cm{sup −2}.

  12. Water permeability of nanoporous graphene at realistic pressures for reverse osmosis desalination

    Science.gov (United States)

    Cohen-Tanugi, David; Grossman, Jeffrey C.

    2014-08-01

    Nanoporous graphene (NPG) shows tremendous promise as an ultra-permeable membrane for water desalination thanks to its atomic thickness and precise sieving properties. However, a significant gap exists in the literature between the ideal conditions assumed for NPG desalination and the physical environment inherent to reverse osmosis (RO) systems. In particular, the water permeability of NPG has been calculated previously based on very high pressures (1000-2000 bars). Does NPG maintain its ultrahigh water permeability under real-world RO pressures (<100 bars)? Here, we answer this question by drawing results from molecular dynamics simulations. Our results indicate that NPG maintains its ultrahigh permeability even at low pressures, allowing a permeate water flux of 6.0 l/h-bar per pore, or equivalently 1041 ± 20 l/m2-h-bar assuming a nanopore density of 1.7 × 1013 cm-2.

  13. THE USE OF SOLAR ENERGY IN THE DESALINATION SEA WATER IN AGRICULTURAL GREENHOUSE

    Directory of Open Access Journals (Sweden)

    T. Tahri

    2015-08-01

    Full Text Available The limited resources of fresh water in arid areas like the Middle East and North Africa MENA have led to the use of poor quality water in irrigation agriculture. These can reduce crop yield and environmental damage. Agriculture accounts for 70% of overall consumption in freshwater. Given the evaporation phenomena that occur in arid regions, this figure rises to 90%. This study focuses on the concept of combining the greenhouse with the desalination of seawater This concept is intended for small scale applications in remote areas where only saline water and solar energy are available.  The main objective of this research work is to analyze the production of fresh water using solar energy in the desalination of sea water in the greenhouse. This operating system is in need of thorough study of evaporators, condensers and design of the greenhouse. Desalination, combining the greenhouse to the use of sea water while exploiting the phenomenon of condensation of water vapor in the air, seems to respond positively to the needs of agricultural irrigation.

  14. Desalination Technologies: Hellenic Experience

    Directory of Open Access Journals (Sweden)

    Konstantinos Zotalis

    2014-04-01

    Full Text Available Beyond doubt, desalination is growing rapidly worldwide. However, there are still obstacles to its wider implementation and acceptance such as: (a high costs and energy use for fresh water production; (b environmental impacts from concentrate disposal; (c a complex, convoluted and time-consuming project permitting process; and (d limited public understanding of the role, importance, benefits and environmental challenges of desalination. In this paper, a short review of desalination in Greece is being made. Data on the cost of desalination shows a decrease in the future and the potential of water desalination in Greece. The paper summarizes the current status in southeastern Greece (e.g., Aegean islands and Crete, and investigates the possibility of production of desalinated water from brackish water.

  15. Adsorption Characteristics of Water and Silica Gel System for Desalination Cycle

    KAUST Repository

    Cevallos, Oscar R.

    2012-07-01

    An adsorbent suitable for adsorption desalination cycles is essentially characterized by a hydrophilic and porous structure with high surface area where water molecules are adsorbed via hydrogen bonding mechanism. Silica gel type A++ possesses the highest surface area and exhibits the highest equilibrium uptake from all the silica gels available in the market, therefore being suitable for water desalination cycles; where adsorbent’s adsorption characteristics and water vapor uptake capacity are key parameters in the compactness of the system; translated as feasibility of water desalination through adsorption technologies. The adsorption characteristics of water vapor onto silica gel type A++ over a temperature range of 30 oC to 60 oC are investigated in this research. This is done using water vapor adsorption analyzer utilizing a constant volume and variable pressure method, namely the Hydrosorb-1000 instrument by Quantachrome. The experimental uptake data is studied using numerous isotherm models, i. e. the Langmuir, Tóth, generalized Dubinin-Astakhov (D-A), Dubinin-Astakhov based on pore size distribution (PSD) and Dubinin-Serpinski (D-Se) isotherm for the whole pressure range, and for a pressure range below 10 kPa, proper for desalination cycles; isotherms type V of the International Union of Pure and Applied Chemistry (IUPAC) classification were exhibited. It is observed that the D-A based on PSD and the D-Se isotherm models describe the best fitting of the experimental uptake data for desalination cycles within a regression error of 2% and 6% respectively. All isotherm models, except the D-A based on PSD, have failed to describe the obtained experimental uptake data; an empirical isotherm model is proposed by observing the behavior of Tóth and D-A isotherm models. The new empirical model describes the water adsorption onto silica gel type A++ within a regression error of 3%. This will aid to describe the advantages of silica gel type A++ for the design of

  16. The effect of flow and chemical corrosion in reverse osmosis over desalinated water

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jae [Chunnam National Univ., Gwangju (Korea, Republic of); Pak, Byung Gu [Doosan Heavy Industry Co., Tongyoung (Korea, Republic of)

    2015-12-15

    Desalinated water produced by a reverse osmosis (RO) filtering method forms about 22% of total production of desalinated water in the world. However, the RO environment is very corrosive due to the presence of various chemicals for water treatment and the flow of sand particles leading to corrosion. Recently, there has been much effort to substitute cheaper and more corrosion resistant stainless steels for copper based alloys as a valve material in RO. Nevertheless, the effects of chemicals and particles on the corrosion of stainless steels have rarely been studied. Erosion phenomenon was detected under the condition with the flow rate of more than 8ms{sup -1} in spite of the absence of sand particles. In seawater containing sand particles, the erosion in stainless steels was accelerated further.

  17. Eukaryotic community diversity and spatial variation during drinking water production (by seawater desalination) and distribution in a full-scale network

    KAUST Repository

    Belila, Abdelaziz

    2016-12-01

    Eukaryotic microorganisms are naturally present in many water resources and can enter, grow and colonize water treatment and transport systems, including reservoirs, pipes and premise plumbing. In this study, we explored the eukaryotic microbial community structure in water during the (i) production of drinking water in a seawater desalination plant and (ii) transport of the drinking water in the distribution network. The desalination plant treatment involved pre-treatment (e.g. spruce filters), reverse osmosis (RO) membrane filtration and post-treatment steps (e.g. remineralization). 454 pyrosequencing analysis of the 18S rRNA gene revealed a highly diverse (35 phyla) and spatially variable eukaryotic community during water treatment and distribution. The desalination plant feed water contained a typical marine picoeukaryotic community dominated by Stramenopiles, Alveolates and Porifera. In the desalination plant Ascomycota was the most dominant phylum (15.5% relative abundance), followed by Alveolata (11.9%), unclassified fungi clade (10.9%) and Porifera (10.7%). In the drinking water distribution network, an uncultured fungi phylum was the major group (44.0%), followed by Chordata (17.0%), Ascomycota (11.0%) and Arthropoda (8.0%). Fungi constituted 40% of the total eukaryotic community in the treatment plant and the distribution network and their taxonomic composition was dominated by an uncultured fungi clade (55%). Comparing the plant effluent to the network samples, 84 OTUs (2.1%) formed the core eukaryotic community while 35 (8.4%) and 299 (71.5%) constituted unique OTUs in the produced water at the plant and combined tap water samples from the network, respectively. RO membrane filtration treatment significantly changed the water eukaryotic community composition and structure, highlighting the fact that (i) RO produced water is not sterile and (ii) the microbial community in the final tap water is influenced by the downstream distribution system. The study

  18. Toward high permeability, selectivity and controllability of water desalination with FePc nanopores.

    Science.gov (United States)

    Deng, Qingming; Pan, Jun; Yin, Xiaohui; Wang, Xiaofeng; Zhao, Lina; Kang, Seung-gu; Jimenez-Cruz, Camilo A; Zhou, Ruhong; Li, Jingyuan

    2016-03-21

    Nanoporous materials exhibit promising potential in water transportation applications, especially in ocean water desalination. It is highly desired to have great permeability, selectivity and controllability in the desalination performance of these nanopores. However, it is still a challenge to achieve all three features in one material or device. Here, we demonstrate efficient and controllable water desalination with a nanoporous 2D Fe phthalocyanine (FePc) membrane using molecular dynamics simulations. We find the FePc membrane not only conducts fast water flow, but it also suppresses ion permeation. The selectivity is attributed to a mechanism distinct from the traditional steric exclusion: cations are excluded due to electrostatic repulsion, whereas anions can be trapped in the nanopore and induce the reorganization of ions in the vicinity of the nanopore, which in turn creates a tendency for the trapped anions to move back into the saline reservoir. More interestingly, we find such mechanism is largely due to the sufficiently strong electrostatic interaction of the charged nanopore region with ions and is not restricted to the FePc nanopore. In addition, the number of protonated nitrogen atoms in FePc pores can be modulated by adjusting the pH value of the solution. The extent of the anion occupancy can thus be regulated, giving rise to control of the water flow. Taken together, great permeability, selectivity and controllability can be achieved with this nanosheet system. Moreover, our study suggests there is an alternative mechanism of water desalination which may be realized by intrinsically nanoporous materials such as FePc membranes.

  19. The Study of Desalination Water Corrosion of Capacity Steel%海水淡化产水对碳钢腐蚀研究

    Institute of Scientific and Technical Information of China (English)

    覃涛; 庞胜林; 申健

    2015-01-01

    某海滨电厂装机容量为4×1000MW,机组全部生产用水源自35000m3/d“双膜法”海水淡化系统。一级反渗透产水对碳钢的腐蚀比较严重。探讨该厂“双膜法”海水淡化产水对碳钢的腐蚀及其缓蚀方法,具有一定的实践意义。%A coastal power plant installed capacity of 4×1000MW, all units of production water from 35000m3/d“double-membrane”desalination systems. A reverse osmosis water corrosion of carbon steel is more serious. Explore the plant“double membrane”produced water desalination and corrosion of carbon steel corrosion method has certain practical significance.

  20. Bioelectrochemical systems-driven directional ion transport enables low-energy water desalination, pollutant removal, and resource recovery.

    Science.gov (United States)

    Chen, Xi; Liang, Peng; Zhang, Xiaoyuan; Huang, Xia

    2016-09-01

    Bioelectrochemical systems (BESs) are integrated water treatment technologies that generate electricity using organic matter in wastewater. In situ use of bioelectricity can direct the migration of ionic substances in a BES, thereby enabling water desalination, resource recovery, and valuable substance production. Recently, much attention has been placed on the microbial desalination cells in BESs to drive water desalination, and various configurations have optimized electricity generation and desalination performance and also coupled hydrogen production, heavy metal reduction, and other reactions. In addition, directional transport of other types of charged ions can remediate polluted groundwater, recover nutrient, and produce valuable substances. To better promote the practical application, the use of BESs as directional drivers of ionic substances requires further optimization to improve energy use efficiency and treatment efficacy. This article reviews existing researches on BES-driven directional ion transport to treat wastewater and identifies a few key factors involved in efficiency optimization.

  1. Technology of Mixing Desalinated Sea Water and Original Municipal Water%海水淡化水与地表源水混配工艺研究

    Institute of Scientific and Technical Information of China (English)

    刘建卫; 唐娜; 何国华; 张蕾; 程鹏高; 王学魁

    2014-01-01

    In this research,the desalinated sea water and original municipal water were mixed to improve the stability of the desalinated seawater. At the same time calcium hydroxide was added to adjust pH and the effect was studied under different conditions of temperature and stirring situation. It showed that the best mixing rate of the desalinated sea water to the mu-nicipal water (Luanhe River water)was 1∶2 in Tianjin. pH value was controled at about 8.0 by adding calcium hydroxide. The water quality could meet the requirements of the water plant,and the water could enter the municipal pipe network safely after subsequent processing.%为了提高海水淡化水稳定性,将海水淡化水与地表源水进行混配处理,同时投加氢氧化钙调节 pH,研究考察在不同温度和搅拌条件下的混配效果,通过对实验结果进行分析,确定天津市海水淡化水与地表源水(滦河水)的最佳混配体积比为1∶2、投加 Ca(OH)2调节 pH 在8.0左右,水质达到水厂要求,经后续处理即可进入天津市市政管网进行安全输送.

  2. Contactless conductometric determination of methanol and ethanol in samples containing water after their electrophoretic desalination.

    Science.gov (United States)

    Tůma, Petr; Opekar, František

    2015-08-01

    Determination of the contents of methanol and ethanol in aqueous solutions was performed by measuring the permittivity of solutions using a contactless conductivity detector (C(4) D) normally used for detection in capillary electrophoresis. The detection cell is a section of a fused silica capillary with an internal diameter of 50 μm with a pair of conductivity electrodes on the external walls. The C(4) D response to samples of methanol/water and ethanol/water mixtures is linear in the concentration interval of approx. 40-100% v/v alcohol content. In the analysis of technical samples of methanol and ethanol, the determination is disturbed by the presence of even trace amounts of salts. This interference can be effectively eliminated by integrated electrophoretic desalination of the sample by the application of a direct current electric voltage with a magnitude of 10 kV to the capillary with the injected sample zone. Under these conditions, the ions migrate out of the sample zone and the detector response is controlled purely by the permittivity of the solvent/water zone. Desalinating is effective for NaCl contents in the range from 0 to 5 mmol/L NaCl. The effectiveness of the desalinating process has been verified on MeOH/water samples and in determination of the ethanol content in distilled beverages normally available in the retail network.

  3. Volume 1: Survey of Available Information in Support of the Energy-Water Bandwidth Study of Desalination Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Prakash [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Aghajanzadeh, Arian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sheaffer, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Brueske, Sabine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dollinger, Caroline [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Kevin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sarker, Prateeti [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ward, Nicholas [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cresko, Joe [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-10-01

    The U.S. Department of Energy (DOE) has set a goal to reduce the cost of seawater desalination systems to $0.50/ cubic meter (m3) through the development of technology pathways to reduce energy, capital, operating, soft, and system integration costs.1 In support of this goal and to evaluate the technology pathways to lower the energy and carbon intensity of desalination while also reducing the total water cost, DOE is undertaking a comprehensive study of the energy consumption and carbon dioxide (CO2) emissions for desalination technologies and systems. This study is being undertaken in two phases. Phase 1, Survey of Available Information in Support of the Energy-Water Bandwidth Study of Desalination Systems, collected the background information that will underpin Phase 2, the Energy Water Bandwidth Study for Desalination Systems. This report (Volume 1) summarizes the results from Phase 1. The results from Phase 2 will be summarized in Volume 2: Energy Water Bandwidth Study for Desalination Systems (Volume 2). The analysis effort for Phase 2 will utilize similar methods as other industry-specific Energy Bandwidth Studies developed by DOE,2 which has provided a framework to evaluate and compare energy savings potentials within and across manufacturing sectors at the macroscale. Volume 2 will assess the current state of desalination energy intensity and reduction potential through the use of advanced and emerging technologies. For the purpose of both phases of study, energy intensity is defined as the amount of energy required per unit of product water output (for example, kilowatt-hours per cubic meter of water produced). These studies will expand the scope of previous sectorial bandwidth studies by also evaluating CO2 intensity and reduction opportunities and informing a techno-economic analysis of desalination systems. Volume 2 is expected to be completed in 2017.

  4. Full cost analysis on seawater desalination and the prospects discussion: A case study of desalination project in Tianjin Beijiang Power Plant%海水淡化全成本分析及其发展前景探讨——以天津北疆电厂海水淡化项目为例

    Institute of Scientific and Technical Information of China (English)

    李晓琼

    2012-01-01

    Water shortage is a major environmental issue that attracts global concern. China is one of the countries with water scarce in the world. This study evaluated and analyzed the cost of desalination project in Tianjin Beijiang Power Plant. In accordance with the relevant theory and desalination cost evaluation methods, the study analyzed the components and calculated the full cost of seawater desalination, then made comparisons with other new ways of water resource use, including the South-to-North Water Diversion, reclaimed water use, rainwater usage, so as to explore the feasibility of desalination in alleviating the water crisis in Beijing and Tianjin areas.%水资源短缺是全球关注的重大环境问题,而中国是全球最为缺水的国家之一。选取天津北疆发电厂海水淡化项目进行成本实证评估与分析,进行全成本的构成分析和综合核算评估,进而与其他新型水资源利用方法(南水北调、中水回用与污水资源化、雨水利用)进行成本比较与分析,探讨其海水淡化模式应对京津地区水资源危机的可行性。

  5. Fertiliser drawn forward osmosis process: Pilot-scale desalination of mine impaired water for fertigation

    KAUST Repository

    Phuntsho, Sherub

    2016-02-20

    The pilot-scale fertiliser driven forward osmosis (FDFO) and nanofiltration (NF) system was operated in the field for about six months for the desalination of saline groundwater from the coal mining activities. Long-term operation of the FDFO-NF system indicates that simple hydraulic cleaning could effectively restore the water flux with minimal chemical cleaning frequency. No fouling/scaling issues were encountered with the NF post-treatment process. The study indicates that, FDFO-NF desalination system can produce water quality that meets fertigation standard. This study also however shows that, the diffusion of solutes (both feed and draw) through the cellulose triacetate (CTA) FO membrane could be one of the major issues. The FO feed brine failed to meet the effluent discharge standard for NH4+ and SO42+ (reverse diffusion) and their concentrations are expected to further increase at higher feed recovery rates. Low rejection of feed salts (Na+, Cl−) by FO membrane may result in their gradual build-up in the fertiliser draw solution (DS) in a closed FDFO-NF system eventually affecting the final water quality unless it is balanced by adequate bleeding from the system through NF and re-reverse diffusion towards the FO feed brine. Therefore, FO membrane with higher reverse flux selectivity than the CTA-FO membrane used in this study is necessary for the application of the FDFO desalination process.

  6. Spanish legislation situation about sea water desalination; Situacion legal de las aguas desaladas en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Gangas del Campo, A.B.; Lopez de Toledo y de la Maza, S.; Perez Clavijo, S.; Vizcaino Blanco, S.

    2007-07-01

    This report analyzes present-day Spanish legislation situation referring to water coming from sea water desalination. It describes the evolution of corresponding regulations and the changes that during last few years have taken place on them. These changes are due to both national and autonomic hydraulic policies, themselves conditioned and limited by actual hydric reality in the country. These waters, before considered as private, become now public by their inclusion in the present Water Law for the private use of hydraulic public domain. this lays out the in force settings to be developed in the new Regulations of Hydraulic Public Domain. (Author)

  7. The sea water desalination by the nuclear reactors; Le dessalement de l'eau de mer par les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Nisan, S. [CEA Cadarache, Dir. du Developpement et de l' Innovation Nucleares DDIN, 13 - Saint-Paul-lez-Durance (France)

    2002-07-01

    This document underlines the importance of water shortage in many areas in the world in the future. The water sea desalination can be a efficient solution to this problem. The desalination methods are presented. In this context the desalination reactors appear as a competitive solution, facing the fossil energies systems not only for the simultaneous electric power and drinking water production, but also for the minimization of greenhouse gases. (A.L.B.)

  8. Impact of socio-economic growth on desalination in the US.

    Science.gov (United States)

    Ziolkowska, Jadwiga R; Reyes, Reuben

    2016-02-01

    In 2013, around 1336 desalination plants in the United States (US) provided purified water mainly to municipalities, the industry sector and for power generation. In 2013 alone, ∼200 million m(3) of water were desalinated; the amount that could satisfy annual municipal water consumption of more than 1.5 million people in the US. Desalination has proven to be a reliable water supply source in many countries around the world, with the total global desalination capacity of ∼60 million m(3)/day in 2013. Desalination has been used to mitigate water scarcity and lessen the pressure on water resources. Currently, data and information about desalination are still limited, while extensive socio-economic analyses are missing. This paper presents an econometric model to fill this gap. It evaluates the impact of selected socio-economic variables on desalination development in the US in the time span 1970-2013. The results show that the GDP and population growth have significantly impacted the desalination sector over the analyzed time period. The insights into the economics of desalination provided with this paper can be used to further evaluate cost-effectiveness of desalination both in the US and in other countries around the world.

  9. Photo Induced Membrane Separation for Water Purification and Desalination Using Azobenzene Modified Anodized Alumina Membranes.

    Science.gov (United States)

    Fujiwara, Masahiro; Imura, Tatsuki

    2015-06-23

    Water purification and desalination to produce end-use water are important agendas in 21st century, because the global water shortage is becoming increasingly serious. Those processes using light energy, especially solar energy, without the consumption of fossil fuels are desired for creating sustainable society. For these earth-friendly water treatments, nanoporous materials and membranes are expected to provide new technologies. We have reported before that the repetitive photo isomerization of azobenzene groups between the trans and cis isomers induced by the simultaneous irradiation of UV and visible lights accelerates the molecular movement of nearby molecules in nanoporous materials. After further studies, we recently found that the permeation of water through azobenzene modified anodized alumina membranes as a photo responsive nanoporous membrane was achieved by the simultaneous irradiation of UV and visible lights, while no water penetration occurred under no light, only single UV or visible light. The photo induced permeation of water was promoted by the vaporization of water with the repetitive photo isomerization of azobenzene. This membrane permeation achieved the purification of water solutions, because dye molecules and a protein dissolved in aqueous solutions were not involved in the photo induced penetrated water. When 3.5% of sodium chloride solution as model seawater was employed for this membrane separation, the salt content of the permeated water was less than 0.01% to accomplish the complete desalination of seawater.

  10. On the use of wind energy to power reverse osmosis desalination plant: A case study from Tenes (Algeria)

    Energy Technology Data Exchange (ETDEWEB)

    Dehmas, Djamila Abdeslame; Merzouk, Nachida Kasbadji [Wind Energy Division, Renewable Energy Development Center, BP. 62, Bouzareah, Algiers (Algeria); Kherba, Nabila; Hacene, Fouad Boukli [University Hassiba Ben Bouali of Chlef (Algeria); Merzouk, Mustapha [Mechanical Department, University Saad Dahlab of Blida (Algeria); Mahmoudi, Hacene [Wind Energy Division, Renewable Energy Development Center, BP. 62, Bouzareah, Algiers (Algeria); University Hassiba Ben Bouali of Chlef (Algeria); Goosen, Mattheus F.A. (Alfaisal University, P.O. Box 50927, Riyadh 11533, Saudi Arabia)

    2011-02-15

    The aim of this study was to provide a detailed analysis of wind energy resources for seawater reverse osmosis desalination (SWRO), in a case study region of Tenes Algeria, by using commercial Wasp software. An economic analysis of the environmental benefits was also done using RETScreen software to give details about financial investment hazards and CO{sub 2} emissions reduction. An energy yield and economical analysis was performed of a hypothetical wind farm consisting of 5 wind turbines of type Bonus 2 MW. It was found that wind energy can successfully power a SWRO desalination plant in the case study region. (author)

  11. APPLICATION OF REGRESSION MODELLING TECHNIQUES IN DESALINATION OF SEA WATER BY MEMBRANE DISTILLATION

    Directory of Open Access Journals (Sweden)

    SELVI S. R

    2015-08-01

    Full Text Available The objective of this work is to gain an idea about the statistical significance of experimental parameters on the performance of membrane distillation. In this work the raw sea water sample without pretreatment was collected from Puducherry and desalinated using direct contact membrane distillation method. Experimental data analysis was carried out using statistical methods. The experimental data involves the effects of feed temperature, feed flow rate and feed concentration on the permeate flux. In statistical methods, regression model was developed to correlate the significance of input parameters like feed temperature, feed concentration and feed flow rate with the output parameter like permeate flux in the process of membrane distillation. Since the performance of the membrane distillation in the desalination of water is characterised by permeate flux, regression model using simple linear method was carried out. Goodness of model fitting should always has to be validated. Regression model was validated using ANOVA. Estimates of ANOVA for the parameter study was given and the coefficient obtained by regression analysis was specified in the regression equation and concluded that the highest coefficient of input parameter is significant, highly influences the response. Feed flow rate and feed temperature has higher influence on permeate flux than that of feed concentration. The coefficient of feed concentration was found to be negative which indicates less significant factor on permeate flux. The chemical composition of sea water was given by water quality analysis . TDS of membrane distilled water was found to be 18ppm than the initial feed TDS of sea water 27,720 ppm. From the experimental work it was found, salt rejection as 99% and water analysis report confirms the quality of distillate obtained by this desalination process as potable water.

  12. Why do local communities support or oppose seawater desalination?

    Science.gov (United States)

    Mirza Ordshahi, B.; Heck, N.; Faraola, S.; Paytan, A.; Haddad, B.; Potts, D. C.

    2016-12-01

    Freshwater shortages have become a global problem due to increasing water consumption and environmental changes which are reducing the reliability of traditional water resources. One option to address water shortages in coastal areas is the use of seawater desalination. Desalination technology is particularly valued for the production of high quality drinking water and consistent production. However, seawater desalination is controversial due to potential environmental, economic, and societal impacts and lack of public support for this water supply method. Compared to alternative potable water production methods, such as water recycling, little is known about public attitudes towards seawater desalination and factors that shape local support or rejection. Our research addresses this gap and explores variables that influence support for proposed desalination plants in the Monterey Bay region, where multiple facilities have been proposed in recent years. Data was collected via a questionnaire-based survey among a random sample of coastal residents and marine stakeholders between June-July, 2016. Findings of the study identify the influence of socio-demographic variables, knowledge about desalination, engagement in marine activities, perception of the environmental context, and the existence of a National Marine Sanctuary on local support. Research outcome provide novel insights into public attitudes towards desalination and enhances our understanding of why communities might support or reject this water supply technology.

  13. Energy analysis of a desalination process of sea water with nuclear energy; Analisis energetico de un proceso de desalinizacion de agua de mar con energia nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Martinez L, G.; Valle H, J., E-mail: julfi_jg@yahoo.com.mx [Universidad Politecnica Metropolitana de Hidalgo, Boulevard acceso a Tolcayuca No. 1009, Ex-hacienda San Javier, 43860 Tolcayuca, Hidalgo (Mexico)

    2016-09-15

    In the present work, is theoretically proven that the residual heat, removed by the chillers in the stage prior to the compression of the recuperative Brayton cycle with which nuclear power plants operate with high temperature gas reactors (HTGR), can be used to produce stem and desalinate seawater. The desalination process selected for the analysis, based on its operating characteristics, is the Multi-Stage Distillation (Med). The Med process will use as energy source, for the flash evaporation process in the flash trap, the residual heat that the reactor coolant dissipates to the environment in order to increase the compression efficiency of the same; the energy dissipated depends on the operating conditions of the reactor. The Med distillation process requires saturated steam at low pressure which can be obtained by means of a heat exchanger, taking advantage of the residual heat, where the relative low temperatures with which the process operates make the nuclear plants with HTGR reactors ideal for desalination of sea water, because they do not require major modifications to their design of their operation. In this work the energy analysis of a six-stage Med module coupled to the chillers of an HTGR reactor of the Pebble Bed Modular Reactor type is presented. Mathematical modeling was obtained by differential equations of mass and energy balances in the system. The results of the analysis are presented in a table for each distillation stage, estimating the pure water obtained as a function of the heat supplied. (Author)

  14. Water Desalination through Zeolitic Imidazolate Framework Membranes: Significant Role of Functional Groups.

    Science.gov (United States)

    Gupta, Krishna M; Zhang, Kang; Jiang, Jianwen

    2015-12-08

    A molecular simulation study is reported for water desalination through five zeolitic imidazolate framework (ZIF) membranes, namely ZIF-25, -71, -93, -96, and -97. The five ZIFs possess identical rho-topology but differ in functional groups. The rejection of salt (NaCl) is found to be around 97% in ZIF-25, and 100% in the other four ZIFs. The permeance ranges from 27 to 710 kg/(m(2)·h·bar), about one∼two orders of magnitude higher compared with commercial reverse osmosis membranes. Due to a larger aperture size da, ZIF-25, -71, and -96 exhibit a much higher water flux than ZIF-93 and -97; however, the flux in ZIF-25, -71, and -96 is governed by the polarity of functional group rather than da. With the hydrophobic CH3 group, ZIF-25 has the highest flux despite the smallest da among ZIF-25, -71, and -96. The lifetime of hydrogen bonding in ZIF-25 is shorter than that in ZIF-71 and -96. Furthermore, water molecules undergo a fast flushing motion in ZIF-25, but frequent jumping in ZIF-96 and particularly in ZIF-97. An Arrhenius-type relationship is found between water flux in ZIF-25 and temperature, and the activation energy is predicted to be 6.5 kJ/mol. This simulation study provides a microscopic insight into water desalination in a series of ZIFs, reveals the key factors (aperture size and polarity of functional group) governing water flux, and suggests that ZIF-25 might be an interesting reverse osmosis membrane for high-performance water desalination.

  15. Enhanced water desalination efficiency in an air-cathode stacked microbial electrodeionization cell (SMEDIC)

    KAUST Repository

    Chehab, Noura A.

    2014-11-01

    A microbial desalination cell was developed that contained a stack of membranes packed with ion exchange resins between the membranes to reduce ohmic resistances and improve performance. This new configuration, called a stacked microbial electro-deionization cell (SMEDIC), was compared to a control reactor (SMDC) lacking the resins. The SMEDIC+S reactors contained both a spacer and 1.4±0.2. mL of ion exchange resin (IER) per membrane channel, while the spacer was omitted in the SMEDIC-S reactors and so a larger volume of resin (2.4±0.2. mL) was used. The overall extent of desalination using the SMEDIC with a moderate (brackish water) salt concentration (13. g/L) was 90-94%, compared to only 60% for the SMDC after 7 fed-batch cycles of the anode. At a higher (seawater) salt concentration of 35. g/L, the extent of desalination reached 61-72% (after 10 cycles) for the SMEDIC, compared to 43% for the SMDC. The improved performance was shown to be due to the reduction in ohmic resistances, which were 130. Ω (SMEDIC-S) and 180. Ω (SMEDIC+S) at the high salt concentration, compared to 210. Ω without resin (SMDC). These results show that IERs can improve performance of stacked membranes for both moderate and high initial salt concentrations. © 2014 Elsevier B.V.

  16. Adsorption desalination: An emerging low-cost thermal desalination method

    KAUST Repository

    Ng, K. C.

    2013-01-01

    Desalination, other than the natural water cycle, is hailed as the panacea to alleviate the problems of fresh water shortage in many water stressed countries. However, the main drawback of conventional desalination methods is that they are energy intensive. In many instances, they consumed electricity, chemicals for pre- and post-treatment of water. For each kWh of energy consumed, there is an unavoidable emission of Carbon Dioxide (CO2) at the power stations as well as the discharge of chemically-laden brine into the environment. Thus, there is a motivation to find new direction or methods of desalination that consumed less chemicals, thermal energy and electricity.This paper describes an emerging and yet low cost method of desalination that employs only low-temperature waste heat, which is available in abundance from either the renewable energy sources or exhaust of industrial processes. With only one heat input, the Adsorption Desalination (AD) cycle produces two useful effects, i.e., high grade potable water and cooling. In this article, a brief literature review, the theoretical framework for adsorption thermodynamics, a lumped-parameter model and the experimental tests for a wide range of operational conditions on the basic and the hybrid AD cycles are discussed. Predictions from the model are validated with measured performances from two pilot plants, i.e., a basic AD and the advanced AD cycles. The energetic efficiency of AD cycles has been compared against the conventional desalination methods. Owing to the unique features of AD cycle, i.e., the simultaneous production of dual useful effects, it is proposed that the life cycle cost (LCC) of AD is evaluated against the LCC of combined machines that are needed to deliver the same quantities of useful effects using a unified unit of $/MWh. In closing, an ideal desalination system with zero emission of CO2 is presented where geo-thermal heat is employed for powering a temperature-cascaded cogeneration plant.

  17. Technology development and application of solar energy in desalination: MEDRC contribution

    KAUST Repository

    Ghaffour, Noreddine

    2011-12-01

    Desalination has become one of the sources for water supply in several countries especially in the Middle East and North Africa region. There is a great potential to develop solar desalination technologies especially in this region where solar source is abundantly available. The success in implementing solar technologies in desalination at a commercial scale depends on the improvements to convert solar energy into electrical and/or thermal energies economically as desalination processes need these types of energies. Since desalination is energy intensive, the wider use of solar technologies in desalination will eventually increase the demand on these technologies, making it possible to go for mass production of photovoltaic (PV) cells, collectors and solar thermal power plants. This would ultimately lead to the reduction in the costs of these technologies. The energy consumed by desalination processes has been significantly reduced in the last decade meaning that, if solar technologies are to be used, less PV modules and area for collectors would be needed. The main aspects to be addressed to make solar desalination a viable option in remote location applications is to develop new materials or improve existing solar collectors and find the best combinations to couple the different desalination processes with appropriate solar collector. In the objective to promote solar desalination in MENA, the Middle East Desalination Research Center has concentrated on various aspects of solar desalination in the last twelve years by sponsoring 17 research projects on different technologies and Software packages development for coupling desalination and renewable energy systems to address the limitations of solar desalination and develop new desalination technologies and hybrid systems suitable for remote areas. A brief description of some of these projects is highlighted in this paper. The full details of all these projects are available the Centers website. © 2011 Elsevier

  18. A desalination battery.

    Science.gov (United States)

    Pasta, Mauro; Wessells, Colin D; Cui, Yi; La Mantia, Fabio

    2012-02-08

    Water desalination is an important approach to provide fresh water around the world, although its high energy consumption, and thus high cost, call for new, efficient technology. Here, we demonstrate the novel concept of a "desalination battery", which operates by performing cycles in reverse on our previously reported mixing entropy battery. Rather than generating electricity from salinity differences, as in mixing entropy batteries, desalination batteries use an electrical energy input to extract sodium and chloride ions from seawater and to generate fresh water. The desalination battery is comprised by a Na(2-x)Mn(5)O(10) nanorod positive electrode and Ag/AgCl negative electrode. Here, we demonstrate an energy consumption of 0.29 Wh l(-1) for the removal of 25% salt using this novel desalination battery, which is promising when compared to reverse osmosis (~ 0.2 Wh l(-1)), the most efficient technique presently available.

  19. A Desalination Battery

    KAUST Repository

    Pasta, Mauro

    2012-02-08

    Water desalination is an important approach to provide fresh water around the world, although its high energy consumption, and thus high cost, call for new, efficient technology. Here, we demonstrate the novel concept of a "desalination battery", which operates by performing cycles in reverse on our previously reported mixing entropy battery. Rather than generating electricity from salinity differences, as in mixing entropy batteries, desalination batteries use an electrical energy input to extract sodium and chloride ions from seawater and to generate fresh water. The desalination battery is comprised by a Na 2-xMn 5O 10 nanorod positive electrode and Ag/AgCl negative electrode. Here, we demonstrate an energy consumption of 0.29 Wh l -1 for the removal of 25% salt using this novel desalination battery, which is promising when compared to reverse osmosis (∼ 0.2 Wh l -1), the most efficient technique presently available. © 2012 American Chemical Society.

  20. Feasibility of municipal solid waste (MSW as energy sources for Saudi Arabia’s future Reverse osmosis (RO desalination plants

    Directory of Open Access Journals (Sweden)

    Agboola Phillips O.

    2016-12-01

    Full Text Available The Kingdom of Saudi Arabia (KSA generates between 1.4–1.75 kg/person/day of Municipal Solid Waste (MSW that accounts for over 16 million tons of MSW/year. The solid waste collected from different sources is dumped in landfills, thereby creating environmental concerns. In this paper, the potential of solid waste as an energy source (Waste to Energy (WTE for Reverse Osmosis (RO water purification was evaluated. The KSA is known for its acute fresh water shortages and uses desalination technology in meeting its daily water requirements; a process that is energy intensive. The evaluation of the energy content of MSW shows a potential to produce about 927 MW in 2015, based on a total mass burn, and about 1,692 MW in 2032. The MSW-WTE plants can produce about 1.5% of the targeted 120 GW of energy for 2032. For the R.O system, it will give approximately 16.8% of the daily fresh water needed for total mass burn and 2.4% with the recycling option.

  1. Ab Initio Density Functional Theory Investigation of the Interaction between Carbon Nanotubes and Water Molecules during Water Desalination Process

    Directory of Open Access Journals (Sweden)

    Loay A. Elalfy

    2013-01-01

    Full Text Available Density functional theory calculations using B3LYP/3-21G level of theory have been implemented on 6 carbon nanotubes (CNTs structures (3 zigzag and 3 armchair CNTs to study the energetics of the reverse osmosis during water desalination process. Calculations of the band gap, interaction energy, highest occupied molecular orbital, lowest unoccupied molecular orbital, electronegativity, hardness, and pressure of the system are discussed. The calculations showed that the water molecule that exists inside the CNT is about 2-3 Å away from its wall. The calculations have proven that the zigzag CNTs are more efficient for reverse osmosis water desalination process than armchair CNTs as the reverse osmosis process requires pressure of approximately 200 MPa for armchair CNTs, which is consistent with the values used in molecular dynamics simulations, while that needed when using zigzag CNTs was in the order of 60 MPa.

  2. Application of forward osmosis membrane technology for oil sands process-affected water desalination.

    Science.gov (United States)

    Jiang, Yaxin; Liang, Jiaming; Liu, Yang

    2016-01-01

    The extraction process used to obtain bitumen from the oil sands produces large volumes of oil sands process-affected water (OSPW). As a newly emerging desalination technology, forward osmosis (FO) has shown great promise in saving electrical power requirements, increasing water recovery, and minimizing brine discharge. With the support of this funding, a FO system was constructed using a cellulose triacetate FO membrane to test the feasibility of OSPW desalination and contaminant removal. The FO systems were optimized using different types and concentrations of draw solution. The FO system using 4 M NH4HCO3 as a draw solution achieved 85% water recovery from OSPW, and 80 to 100% contaminant rejection for most metals and ions. A water backwash cleaning method was applied to clean the fouled membrane, and the cleaned membrane achieved 77% water recovery, a performance comparable to that of new FO membranes. This suggests that the membrane fouling was reversible. The FO system developed in this project provides a novel and energy efficient strategy to remediate the tailings waters generated by oil sands bitumen extraction and processing.

  3. Using microbial desalination cells to reduce water salinity prior to reverse osmosis

    KAUST Repository

    Mehanna, Maha

    2010-01-01

    A microbial desalination cell (MDC) is a new method to reduce the salinity of one solution while generating electrical power from organic matter and bacteria in another (anode) solution. Substantial reductions in the salinity can require much larger volumes of the anode solution than the saline water, but any reduction of salinity will benefit the energy efficiency of a downstream reverse osmosis (RO) desalination system. We investigated here the use of an MDC as an RO pre-treatment method using a new type of air-cathode MDC containing three equally sized chambers. A single cycle of operation using a 1 g L -1 acetate solution reduced the conductivity of salt water (5 g L-1 NaCl) by 43 ± 6%, and produced a maximum power density of 480 mW m-2 with a coulombic efficiency of 68 ± 11%. A higher concentration of acetate (2 g L-1) reduced solution conductivity by 60 ± 7%, and a higher salt concentration (20 g L-1 NaCl) reduced solution conductivity by 50 ± 7%. The use of membranes with increased ion exchange capacities further decreased the solution conductivity by 63 ± 2% (20 g L-1 NaCl). These results demonstrate substantial (43-67%) desalination of water is possible using equal volumes of anode solution and salt water. These results show that MDC treatment could be used to substantially reduce salt concentrations and thus energy demands for downstream RO processing, while at the same time producing electrical power. © 2010 The Royal Society of Chemistry.

  4. Experimental evidence of rapid water transport through carbon nanotubes embedded in polymeric desalination membranes.

    Science.gov (United States)

    Lee, Hee Dae; Kim, Hyo Won; Cho, Young Hoon; Park, Ho Bum

    2014-07-09

    As water molecules permeate ultrafast through carbon nanotubes (CNTs), many studies have prepared CNTs-based membranes for water purification as well as desalination, particularly focusing on high flux membranes. Among them, vertically aligned CNTs membranes with ultrahigh water flux have been successfully demonstrated for fundamental studies, but they lack scalability for bulk production and sufficiently high salt rejection. CNTs embedded in polymeric desalination membranes, i.e., polyamide thin-film composite (TFC) membranes, can improve water flux without any loss of salt rejection. This improved flux is achieved by enhancing the dispersion properties of CNTs in diamine aqueous solution and also by using cap-opened CNTs. Hydrophilic CNTs were prepared by wrapping CNT walls via bio-inspired surface modification using dopamine solution. Cap-opening of pristine CNTs is performed by using a thermo-oxidative process. As a result, hydrophilic, cap-opened CNTs-embedded polyamide TFC membranes are successfully prepared, which show much higher water flux than pristine polyamide TFC membrane. On the other hand, less-disperse, less cap-opened CNTs-embedded TFC membranes do not show any flux improvement and rather lead to lower salt rejection properties.

  5. Boron in reverse osmosis water desalination: current situational and applying technologies for its removal; El boro en las aguas desaladas por osmosis inversa: situacion actual y tecnologias aplicables para su eliminacion

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigo Sanz, M.; Penate Suarez, B.

    2007-07-01

    In most of the seawater reverse osmosis desalination plants operating in one stage, the water produced presents values bordering or exceeding the limit established by the Spanish legislation for boron content of 1mg/l. As well as on the intrinsic features of the membrane elements, the boron removal in the desalination process depends on various factors. In this article the most relevant ones are described and a synopsis of the applied technologies and designs is introduced in order to fulfil current regulations. (Author)

  6. Investigation of Indirect Contact Freezing Process in Desalination of Boshehr Beach's Saline Water

    Directory of Open Access Journals (Sweden)

    M Alimohaadi

    2011-10-01

    Full Text Available Background and Objectives: Nowadays, most countries of the world have shortage of water due to many reasons such as population growth, rising of living standards, indiscriminate water use, and so on. Besides, in absence of adequate water resources, desalination of brackish and saline waters have been used to supply potable water. Freezing process is one of the methods which can be used to desalinate saline waters.The aim of this study was to survey freezing process to produce potable water from saline water of Persian Gulf shores."nMaterials and Methods: This study was conducted in lab-scale by using indirect contact freezing. Three samples of 50 liter were provided from Bushehr shores. The implemented process steps were freezing (crystallization, separation of crystals, surface washing, and thawing. Freezing of the samples (each in 0.5 liter containers were performed by a refrigerator at -20°C and 0.1KW/h energy consumption.Results: The removal efficiencies of TDS in the first, second, and third samples by first freezing process were 56, 56, and 51 percent, respectively. Moreover, the removal efficiencies by EC were 42, 44, and 40 percent, respectively. Meanwhile, the removal efficiencies of TDS in first, second, and third samples by second freezing process observed 69, 69, and 68 percent, respectively. Moreover, the removal efficiencies by EC were 61, 60, and 63 percent, respectively. Also, the removal efficiencies of TDS in first, second, and third samples by third freezing process were 72, 73, and 72 percent, respectively. Moreover, the removal efficiencies by EC were 77, 78, and 77 percent, respectively. The production of the potable water by this method was 15-20 percent of the entry water.Conclusions: According to the obtained results, potable water was obtained after third freezing of the saline water. Meanwhile, TDS of the produced water was less than maximum allowed concentration of Iranian standards.

  7. Water desalination with a single-layer MoS2 nanopore

    Science.gov (United States)

    Heiranian, Mohammad; Farimani, Amir Barati; Aluru, Narayana R.

    2015-10-01

    Efficient desalination of water continues to be a problem facing the society. Advances in nanotechnology have led to the development of a variety of nanoporous membranes for water purification. Here we show, by performing molecular dynamics simulations, that a nanopore in a single-layer molybdenum disulfide can effectively reject ions and allow transport of water at a high rate. More than 88% of ions are rejected by membranes having pore areas ranging from 20 to 60 Å2. Water flux is found to be two to five orders of magnitude greater than that of other known nanoporous membranes. Pore chemistry is shown to play a significant role in modulating the water flux. Pores with only molybdenum atoms on their edges lead to higher fluxes, which are ~70% greater than that of graphene nanopores. These observations are explained by permeation coefficients, energy barriers, water density and velocity distributions in the pores.

  8. Selection of Seawater Desalination Scheme for Nuclear Power Plant%核电厂海水淡化方案选择

    Institute of Scientific and Technical Information of China (English)

    王鹏

    2011-01-01

    As a trend,seawater desalination is used to settle out the problem of freshwater source for nuclear power plant.This article proposes a recommended seawater desalination scheme by comparison all of the seawater desalination schemes for Shandong Haiyang nuclear plant.%滨海核电采用海水淡化解决淡水来源,已经成为一个趋势。结合山东海阳核电工程,对海水淡化方式进行综合比选,提出滨海核电厂海水淡化的推荐方案。

  9. Desalination of Basal Water by Mesoporous Carbons Nanocomposite Membrane.

    Science.gov (United States)

    Choi, Jeongdong; Ahn, Youngho; Gamal El-Din, Mohamed; Kim, Eun-Sik

    2016-02-01

    The hydro-transportation process used to obtain bitumen from the Alberta oil sands produces large volume of basal depressurization water (BDW), which contains high salt concentrations. In this research, thin-film nanocomposite (TFN) membrane technology applied to treat BDW in lab-scale, and evaluated water properties before and after the treatment. The average rejection ratios of ionic species were 95.2% and 92.8% by TFN membrane (with ordered mesoporous carbons (OMCs)) and thin-film composite (TFC) (without OMCs) membrane, respectively. The turbidity and total dissolved solids (TDS) were completely rejected in all treatment conditions. Interestingly, the water flux of TFN membrane was dramatically increased compared to TFC membrane. The increase of water flux was believed to be caused by the increased membrane surface hydrophilicity and nano-pore effects by the OMCs.

  10. SOLAR WATER DESALINATION SYSTEM WITH CONDENSER WITHOUT USING ELECTRICITY FOR RURAL AREAS

    Directory of Open Access Journals (Sweden)

    Abhijeet Auti

    2013-01-01

    Full Text Available Domestic desalination is a process in which salt water is heated and converted to steam by using parabolic solar concentrator. Solar radiations incident on concentrator are focused at the absorber which contains salt water. The steam is then condensed by the condenser which is designed on the basis of the thermal analysis. Condenser is a basically a water tank with copper tubes immersed in it. The steam flows through the tubes and heat exchange takes place between steam and tank water which absorbs the heat from the steam by converting it to purified water. No electricity is used for the condensation and the equipment is suitable for a small family, having no or limited access to electricity.

  11. Advances in Membrane Distillation for Water Desalination and Purification Applications

    Directory of Open Access Journals (Sweden)

    Juan Gomez

    2013-01-01

    Full Text Available Membrane distillation is a process that utilizes differences in vapor pressure to permeate water through a macro-porous membrane and reject other non-volatile constituents present in the influent water. This review considers the fundamental heat and mass transfer processes in membrane distillation, recent advances in membrane technology, module configurations, and the applications and economics of membrane distillation, and identifies areas that may lead to technological improvements in membrane distillation as well as the application characteristics required for commercial deployment.

  12. Omniphobic Polyvinylidene Fluoride (PVDF) Membrane for Desalination of Shale Gas Produced Water by Membrane Distillation.

    Science.gov (United States)

    Boo, Chanhee; Lee, Jongho; Elimelech, Menachem

    2016-11-15

    Microporous membranes fabricated from hydrophobic polymers such as polyvinylidene fluoride (PVDF) have been widely used for membrane distillation (MD). However, hydrophobic MD membranes are prone to wetting by low surface tension substances, thereby limiting their use in treating challenging industrial wastewaters, such as shale gas produced water. In this study, we present a facile and scalable approach for the fabrication of omniphobic polyvinylidene fluoride (PVDF) membranes that repel both water and oil. Positive surface charge was imparted to an alkaline-treated PVDF membrane by aminosilane functionalization, which enabled irreversible binding of negatively charged silica nanoparticles (SiNPs) to the membrane through electrostatic attraction. The membrane with grafted SiNPs was then coated with fluoroalkylsilane (perfluorodecyltrichlorosilane) to lower the membrane surface energy. Results from contact angle measurements with mineral oil and surfactant solution demonstrated that overlaying SiNPs with ultralow surface energy significantly enhanced the wetting resistance of the membrane against low surface tension liquids. We also evaluated desalination performance of the modified membrane in direct contact membrane distillation with a synthetic wastewater containing surfactant (sodium dodecyl sulfate) and mineral oil, as well as with shale gas produced water. The omniphobic membrane exhibited a stable MD performance, demonstrating its potential application for desalination of challenging industrial wastewaters containing diverse low surface tension contaminants.

  13. Integrating tunable anion exchange with reverse osmosis for enhanced recovery during inland brackish water desalination.

    Science.gov (United States)

    Smith, Ryan C; SenGupta, Arup K

    2015-05-01

    For inland brackish water desalination by reverse osmosis or RO, concentrate or reject disposal poses a major challenge. However, enhanced recovery and consequent reduction in the reject volume using RO processes is limited by the solubility of ions present in the feedwater. One of the most common and stubborn precipitate formed during desalination is calcium sulfate. Reducing or eliminating the presence of sulfate would allow the process to operate at higher recoveries without threat to membrane scaling. In this research, this goal is accomplished by using an appropriate mixture of self-regenerating anion exchange resins that selectively remove and replace sulfate by chloride prior to the RO unit. Most importantly, the mixed bed of anion exchange resins is self-regenerated with the reject brine from the RO process, thus requiring no addition of external chemicals. The current work demonstrates the reversibility of the hybrid ion exchange and RO (HIX-RO) process with 80% recovery for a brackish water composition representative of groundwater in San Joaquin Valley in California containing approximately 5200 mg/L of total dissolved solids or TDS. Consequently, the reject volume can be reduced by 50% without the threat of sulfate scaling and use of antiscaling chemicals can be eliminated altogether. By appropriately designing or tuning the mixed bed of anion exchange resins, the process can be extended to nearly any composition of brackish water for enhanced recovery and consequent reduction in the reject volume.

  14. Exceptionally fast water desalination at complete salt rejection by pristine graphyne monolayers

    Science.gov (United States)

    Xue, Minmin; Qiu, Hu; Guo, Wanlin

    2013-12-01

    Desalination that produces clean freshwater from seawater holds the promise of solving the global water shortage for drinking, agriculture and industry. However, conventional desalination technologies such as reverse osmosis and thermal distillation involve large amounts of energy consumption, and the semipermeable membranes widely used in reverse osmosis face the challenge to provide a high throughput at high salt rejection. Here we find by comprehensive molecular dynamics simulations and first principles modeling that pristine graphyne, one of the graphene-like one-atom-thick carbon allotropes, can achieve 100% rejection of nearly all ions in seawater including Na+, Cl-, Mg2+, K+ and Ca2+, at an exceptionally high water permeability about two orders of magnitude higher than those for commercial state-of-the-art reverse osmosis membranes at a salt rejection of ˜98.5%. This complete ion rejection by graphyne, independent of the salt concentration and the operating pressure, is revealed to be originated from the significantly higher energy barriers for ions than for water. This intrinsic specialty of graphyne should provide a new possibility for the efforts to alleviate the global shortage of freshwater and other environmental problems.

  15. Application of a Hybrid Uf-Ro Process to Geothermal Water Desalination. Concentrate Disposal and Cost Analysis

    Directory of Open Access Journals (Sweden)

    Tomaszewska Barbara

    2014-12-01

    Full Text Available M embrane-based water desalination processes and hybrid technologies are often considered as a technologically and economically viable alternative for desalination of geothermal waters. This has been confirmed by the results of pilot studies concerning the UF-RO desalination of geothermal waters extracted from various geological structures in Poland. The assessment of the feasibility of implementing the water desalination process analysed on an industrial scale is largely dependent on the method and possibility of disposing or utilising the concentrate. The analyses conducted in this respect have demonstrated that it is possible to use the solution obtained as a balneological product owing to its elevated metasilicic acid, fluorides and iodides ions content. Due to environmental considerations, injecting the concentrate back into the formation is the preferable solution. The energy efficiency and economic analysis conducted demonstrated that the cost effectiveness of implementing the UF-RO process in a geothermal system on an industrial scale largely depends on the factors related to its operation, including without limitation the amount of geothermal water extracted, water salinity, the absorption parameters of the wells used to inject water back into the formation, the scale of problems related to the disposal of cooled water, local demand for drinking and household water, etc. The decrease in the pressure required to inject water into the formation as well as the reduction in the stream of the water injected are among the key cost-effectiveness factors. Ensuring favourable desalinated water sale terms (price/quantity is also a very important consideration owing to the electrical power required to conduct the UF-RO process.

  16. Sustainable water desalination and electricity generation in a separator coupled stacked microbial desalination cell with buffer free electrolyte circulation.

    Science.gov (United States)

    Chen, Xi; Liang, Peng; Wei, Zhimou; Zhang, Xiaoyuan; Huang, Xia

    2012-09-01

    A separator coupled circulation stacked microbial desalination cell (c-SMDC-S) was constructed to stabilize the pH imbalances in MDCs without buffer solution and achieved the stable desalination. The long-term operation of c-SMDC-S, regular stacked MDC (SMDC) and no separator coupled circulation SMDC (c-SMDC) were tested. The SMDC and c-SMDC could only stably operate for 1 week and 1 month owing to dramatic anolyte pH decrease and serious biofilm growth on the air cathode, respectively. The c-SMDC-S gained in anolyte alkalinity and operated stably for about 60 days without the thick biofilm growth on cathode. Besides, the chemical oxygen demand removal and coulombic efficiency were 64 ± 6% and 30 ± 2%, higher than that of SMDC and c-SMDC, respectively. It was concluded that the circulation of alkalinity could remove pH imbalance while the separator could expand the operation period and promote the conversion of organic matter to electricity.

  17. Simultaneous water desalination and electricity generation in a microbial desalination cell with electrolyte recirculation for pH control

    KAUST Repository

    Qu, Youpeng

    2012-02-01

    A recirculation microbial desalination cell (rMDC) was designed and operated to allow recirculation of solutions between the anode and cathode chambers. This recirculation avoided pH imbalances that could inhibit bacterial metabolism. The maximum power density was 931±29mW/m 2 with a 50mM phosphate buffer solution (PBS) and 776±30mW/m 2 with 25mM PBS. These power densities were higher than those obtained without recirculation of 698±10mW/m 2 (50mM PBS) and 508±11mW/m 2 (25mM PBS). The salt solution (20g/L NaCl) was reduced in salinity by 34±1% (50mM) and 37±2% (25mM) with recirculation (rMDC), and by 39±1% (50mM) and 25±3% (25mM) without recirculation (MDC). These results show that electrolyte recirculation using an rMDC is an effective method to increase power and achieve efficient desalination by eliminating pH imbalances. © 2011 Elsevier Ltd.

  18. The Development of a Renewable-Energy-Driven Reverse Osmosis System for Water Desalination and Aquaculture Production

    Institute of Scientific and Technical Information of China (English)

    Clark C K Liu

    2013-01-01

    Water and energy are closely linked natural resources-the transportation, treatment, and distribution of water depends on low-cost energy;while power generation requires large volumes of water. Seawater desalination is a mature technology for increasing freshwater supply, but it is essentially a trade of energy for freshwater and is not a viable solution for regions where both water and energy are in short supply. This paper discusses the development and application of a renewable-energy-driven reverse osmosis (RO) system for water desalination and the treatment and reuse of aquaculture wastewater. The system consists of (1) a wind-driven pumping subsystem, (2) a pressure-driven RO membrane desalination subsystem, and (3) a solar-driven feedback control module. The results of the pilot experiments indicated that the system, operated under wind speeds of 3 m s-1 or higher, can be used for brackish water desalination by reducing the salinity of feedwater with total dissolved solids (TDS) of over 3 000 mg L-1 to product water or permeate with a TDS of 200 mg L-1 or less. Results of the pilot experiments also indicated that the system can remove up to 97%of the nitrogenous wastes from the fish pond effluent and can recover and reuse up to 56%of the freshwater supply for fish pond operation.

  19. Generation of Electric Energy and Desalinating Water from Solar Energy and the Oceans Hydropower

    Science.gov (United States)

    Elfikky, Niazi

    will decrease or when the Solar thermal radiation of the Sun will increase, the efficiency of the Solar Voltiac Cells will nearly fully degrade at the ambient temperature 55C?(131Fahrenheit). As known, in the African countries near the Atlantic Ocean like Mauritania, Senegal, South Africa and Guinea ..etc, also the middle east countries like Moroco, Tuniz, Lybia, Algeria, Egypt, Sudan, Saudi Arabia, Kuwait, United Arab Emarates and Iraq etc. the range of the ambient temerature in the Summer seasons especially in the Desrt near the Atlantic Ocean, the Mediterranean Sea, Red Sea and the Persian Gulf is around (60-70)C? or (140F-158F). Similarly the majority of the Latin American countries with India and China. So, all the environments of the antecedent countries are not the suitable envuironment for generating electric energy from the Solar Voltiac cells in all seasons along the year. Characteristics of the Concentrated Solar Power (CSP). It uses half cylindrical mirrors to reflect with concentration the Solar thermal Radiation around a pipe to heat a special liquid. When the liquid will be heated it will pass through a water tank to exchange its heat in water tank to evaporate the water and create a steam to drive the Power Turbine for generating electricity. Also the capacity of the electric power generated by such technique is so much limited with respect to the wide area (3000 acres, about five miles end to end) occupied by the Concentrated Solar Power Plant . 3. The New Project Profile. Employing the water from the Oceans, Mediterranean Sea, Red Sea and Chinees sea to generate the bulky Hydraulic power capacity which will be deliverd directly to the electric power Grid without any inverters. The Salt water will be drawn for desalination after driving A Steam Power Turbine for genrating additional electric power. Invited Call, Speaker No.41445.

  20. Relationship between performance deterioration of a polyamide reverse osmosis membrane used in a seawater desalination plant and changes in its physicochemical properties.

    Science.gov (United States)

    Suzuki, Tasuma; Tanaka, Ryohei; Tahara, Marina; Isamu, Yuya; Niinae, Masakazu; Lin, Lin; Wang, Jingbo; Luh, Jeanne; Coronell, Orlando

    2016-09-01

    While it is known that the performance of reverse osmosis membranes is dependent on their physicochemical properties, the existing literature studying membranes used in treatment facilities generally focuses on foulant layers or performance changes due to fouling, not on the performance and physicochemical changes that occur to the membranes themselves. In this study, the performance and physicochemical properties of a polyamide reverse osmosis membrane used for three years in a seawater desalination plant were compared to those of a corresponding unused membrane. The relationship between performance changes during long-term use and changes in physicochemical properties was evaluated. The results showed that membrane performance deterioration (i.e., reduced water flux, reduced contaminant rejection, and increased fouling propensity) occurred as a result of membrane use in the desalination facility, and that the main physicochemical changes responsible for performance deterioration were reduction in PVA coating coverage and bromine uptake by polyamide. The latter was likely promoted by oxidant residual in the membrane feed water. Our findings indicate that the optimization of membrane materials and processes towards maximizing the stability of the PVA coating and ensuring complete removal of oxidants in feed waters would minimize membrane performance deterioration in water purification facilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Dynamics of microbial communities in an integrated ultrafiltration–reverse osmosis desalination pilot plant located at the Arabian Gulf

    KAUST Repository

    Hong, Pei-Ying

    2015-08-27

    This study demonstrated the use of high-throughput sequencing to assess the efficacy of an integrated ultrafiltration (UF)–reverse osmosis (RO) desalination pilot plant located at the Arabian Gulf, and to identify potential microbial-associated problems that may arise in this plant. When integrated into the desalination treatment system, the UF membranes were able to serve as a good pretreatment strategy to delay RO fouling by achieving up to 1.96-log removal of cells from the seawater. Consequently, the differential pressure of the RO membrane remained around 1 bar for the entire six-month study, suggesting no significant biofouling performance issue identified for this RO system. Examples of microbial populations effectively removed by the UF membranes from the feed waters included Nitrosoarchaeum limnia and phototrophic eukaryotes. Microbial-associated problems observed in this pilot plant included the presence of Pseudomonas spp. in coexistence with Desulfovibrio spp. These two bacterial populations can reduce sulfate and produce hydrogen sulfide, which would in turn cause corrosion problems or compromise membrane integrities. Chemical-enhanced backwashing (CEB) can be used as an effective strategy to minimize the associated microbial problems by removing bacterial populations including sulfate reducers from the UF membranes.

  2. A single-effect solar still for desalination of treated oil production water

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, M.A.S.B.; Melo, J.L.S.; Melo, H.N.S.; Chiavone-Filho, O.; Nunes, A.O.; Borges, M.C. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)], E-mail: magnelica@eq.ufrn.br

    2009-10-15

    Methods for evaporating oil produced water (OPW) have been tested and used to remove salinity by means of solar energy. The aim of the present study was to assess the application of a conventional solar still in the desalination of treated OPW, investigating the temperatures reached and comparing them with solar radiation levels. The solar distillation equipment consisted of a two-water single effect passive solar still. The still was fed with treated OPW. Temperatures were recorded using data loggers with PT100 sensors. The experiments were conducted between February and April 2008. The temperatures obtained are consistent with the type of still used and the seasons of the year. The maximum recorded temperatures varied between 49.9 deg C and 63.8 deg C. The distilled volume ranged between 48 and 240 mL/h. The estimated daily amount produced was compatible with literature values. The results show that the single-effect solar still can also be used to desalinate treated OPW. (author)

  3. HybridICE® filter: ice separation in freeze desalination of mine waste waters.

    Science.gov (United States)

    Adeniyi, A; Maree, J P; Mbaya, R K K; Popoola, A P I; Mtombeni, T; Zvinowanda, C M

    2014-01-01

    Freeze desalination is an alternative method for the treatment of mine waste waters. HybridICE(®) technology is a freeze desalination process which generates ice slurry in surface scraper heat exchangers that use R404a as the primary refrigerant. Ice separation from the slurry takes place in the HybridICE filter, a cylindrical unit with a centrally mounted filter element. Principally, the filter module achieves separation of the ice through buoyancy force in a continuous process. The HybridICE filter is a new and economical means of separating ice from the slurry and requires no washing of ice with water. The performance of the filter at a flow-rate of 25 L/min was evaluated over time and with varied evaporating temperature of the refrigerant. Behaviours of the ice fraction and residence time were also investigated. The objective was to find ways to improve the performance of the filter. Results showed that filter performance can be improved by controlling the refrigerant evaporating temperature and eliminating overflow.

  4. Performance Investigation of O-Ring Vacuum Membrane Distillation Module for Water Desalination

    Directory of Open Access Journals (Sweden)

    Adnan Alhathal Alanezi

    2016-01-01

    Full Text Available A new O-ring flat sheet membrane module design was used to investigate the performance of Vacuum Membrane Distillation (VMD for water desalination using two commercial polytetrafluoroethylene (PTFE and polyvinylidene fluoride (PVDF flat sheet hydrophobic membranes. The design of the membrane module proved its applicability for achieving a high heat transfer coefficient of the order of 103 (W/m2 K and a high Reynolds number (Re. VMD experiments were conducted to measure the heat and mass transfer coefficients within the membrane module. The effects of the process parameters, such as the feed temperature, feed flow rate, vacuum degree, and feed concentration, on the permeate flux have been investigated. The feed temperature, feed flow rate, and vacuum degree play an important role in enhancing the performance of the VMD process; therefore, optimizing all of these parameters is the best way to achieve a high permeate flux. The PTFE membrane showed better performance than the PVDF membrane in VMD desalination. The obtained water flux is relatively high compared to that reported in the literature, reaching 43.8 and 52.6 (kg/m2 h for PVDF and PTFE, respectively. The salt rejection of NaCl was higher than 99% for both membranes.

  5. Water desalination by air-gap membrane distillation using meltblown polypropylene nanofiber membrane

    Science.gov (United States)

    Rosalam, S.; Chiam, C. K.; Widyaparamitha, S.; Chang, Y. W.; Lee, C. A.

    2016-06-01

    This paper presents a study of air gap membrane distillation (AGMD) using meltblown polypropylene (PP) nanofiber membrane to produce fresh water via desalination process. PP nanofiber membranes with the effective area 0.17 m2 are tested with NaCl solutions (0.5 - 4.0 wt.%) and seawater as the feed solutions (9400 - 64800 μS/cm) in a tubular membrane module. Results show that the flux decreases with increasing the membrane thickness from 547 to 784 μm. The flux increases with the feed flow rate and temperature difference across the membrane. The feed concentration affects the flux insignificantly. The AGMD system can reject the salts at least 96%. Water vapor permeation rate is relatively higher than solute permeation rate resulting in the conductivity value of permeate decreases when the corresponding flux increases. The AGMD system produces the fresh water (200 - 1520 μS/cm) that is suitable for drinking, fisheries or irrigation.

  6. Autonomous system without batteries for brackish water desalination; Sistema autonomo sem baterias para dessalinizacao de agua salobra

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Eduardo Henrique Pereira de; Bezerra, Luiz Daniel Santos; Antunes, Fernando Luiz Marcelo [Universidade Federal do Ceara (PPGEE/UFC), Fortaleza, CE (Brazil). Programa de Pos -Graduacao em Engenharia Eletrica

    2008-07-01

    Ones of the goods most precious of the humanity, in the current times, with certainty is the drinking waters. Each scarcer and basic time for survival. In everybody more than 6,000 children die every day victims of some type of illness provoked for contaminated water (WHO, 2003). The underground water for being free of contamination is a good alternative, however its exploration if it becomes each more expensive time, since the water of better quality, is located in deeper sheets. In the state of the Ceara, techniques to explore water of deep well are each more frequent time, however, present a great inconvenience, most of the excavated wells, present brackish water, improper for the human consumption. In the attempt to make possible these wells the water is treated by desalination process. This article presents the practical implementation of a desalination the reverse Osmosis, Pump high-pressure supplied by solar photovoltaic energy system. (author)

  7. Desalination of underground brackish waters using an electrodialysis system powered directly by photovoltaic energy

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, J.M.; Exposito, E.; Gallud, F.; Garcia-Garcia, V.; Montiel, V.; Aldaz, A. [Grupo de Electroquimica Aplicada y Electrocatalisis, Departamento de Quimica Fisica and Instituto Universitario de Electroquimica, Universidad de Alicante, Ap. 99, 03080 Alicante (Spain)

    2008-12-15

    The aims of this paper are: to demonstrate the feasibility of the desalination of brackish water from aquifers (total dissolved solids=2300-5100 g m{sup -3}) by means of an electrodialysis system powered directly by photovoltaic solar panels, and improve the mathematical model developed in a previous work in order to apply it to real brackish waters. The application of this model allows to predict the behaviour of the electrodialysis-photovoltaic system under different operational and meteorological conditions, and the time required to reach a given final concentration. Finally, the cost of electrodialysis-photovoltaic systems for small applications in isolated locations with lack of electric grid has been estimated. (author)

  8. Superhydrophobic membranes with ordered arrays of nanospiked microchannels for water desalination.

    Science.gov (United States)

    Ma, Zeyu; Hong, Yan; Ma, Liyuan; Su, Ming

    2009-05-19

    Membrane distillation can desalinate seawater using low-grade heat energy or solar heat, but it has limited mass fluxes and membrane fouling issues. Glass membranes with integrated arrays of nanospiked microchannels and a narrow pore size distribution are made through a process that involves glass fiber drawing, dissolving template material from microchannels and differential chemical etching. After surface modification, superhydrophobic glass membranes with water contact angles of over 160 degrees are produced because of the formations of ordered arrays of spiked nanostructures. The superhydrophobic membrane has shown better antifouling ability and higher flux than those of existing polymer membranes, especially at high salt concentration, owing to its large pore diameter, straight pore shape, narrow pore size distribution, high chemical and thermal stabilities, and water-repelling ability.

  9. EVALUATION OF A SOLAR DESALINATION SYSTEM, TYPE CYLINDRICAL PARABOLIC CONCENTRATOR FOR SEA WATER

    Directory of Open Access Journals (Sweden)

    Carolina Mercado

    2015-12-01

    Full Text Available In this work, the methodology for the design, construction and commissioning of a solar desalinator, based on a parabolic trough collector and a solar still occurs, is presented. The energy is supplied through the solar collector, which is connected to the distiller. The equipment was set up on the premises of the Universidad Católica del Norte. It is compact, modular, low cost, easy maintenance and long life, with an average production capacity of distilled water of 2.37 l / d, however, it has to be considered that this rate is directly related with weather conditions and sea water flow entering the system, generating an average percentage of 34.04% efficiency. The results obtained with the respective findings, conclusions and recommendations for future projects associated to renewable energy equipment designed analyzed.

  10. In-depth analyses of organic matters in a full-scale seawater desalination plant and an autopsy of reverse osmosis membrane

    KAUST Repository

    Jeong, Sanghyun

    2016-02-17

    In order to facilitate the global performance of seawater reverse osmosis (SWRO) systems, it is important to improve the feed water quality before it enters the RO. Currently, many desalination plants experience production losses due to incidents of organic and biofouling. Consequently, monitoring or characterizing the pretreatment step using more advanced organic and biological parameters are required for better operation to lessen fouling issues. In this study, the performance of pretreatment processes (including coagulation, dual media filtration (DMF), polishing with cartridge filter (CF) coupled with anti-scalant) used at Perth Seawater Desalination Plant (PSDP) located in Western Australia were characterized in terms of organic and biological fouling parameters. These analyses were carried out using liquid chromatography with organic carbon detector (LC-OCD), three dimensional-fluorescence excitation emission matrix (3D-FEEM) and assimilable organic carbon (AOC). Furthermore, the used (exhausted) RO membrane and CF were autopsied so that the fates and behaviors of organic foulants in these treatment systems could be better understood.

  11. Energy Implications of Seawater Desalination (Invited)

    Science.gov (United States)

    Cooley, H.; Heberger, M. G.

    2013-12-01

    Freshwater has traditionally come from rivers, lakes, streams, and groundwater aquifers. As demand increases and climate change alters the location and timing of water supply, these traditional sources are becoming unavailable, more difficult, or increasingly expensive to develop. As a result, many communities are switching to alternative sources of water. Interest in pursuing seawater desalination is high in many coastal communities. In California, for example, 17 plants are proposed for development along the California coast and two in Mexico. Water managers are pursing desalination because is a local supply that can help diversify the water supply portfolio. Additionally, it is a reliable supply, which can be especially valuable during a drought. But removing the salt from seawater is an energy-intensive process that consumes more energy per gallon than most other water supply and treatment options. These energy requirements are key factors that will impact the extent and success of desalination in California. Energy requirements for seawater desalination average about 4.0 kWh per cubic meter (m3) of water produced. By comparison, the least energy-intensive options of local sources of groundwater and surface water require 0 - 0.90 kWh per m3; wastewater reuse, depending on treatment levels, may require from 0.26 - 2.2 kWh per m3. Beyond the electricity required for the desalination facility itself, producing any new source of water, including through desalination, increases the amount of energy required to deliver and use the water produced as well as collect, treat, and dispose of the wastewater generated. Energy is the largest single variable cost for a desalination plant, varying from one-third to more than one-half the cost of produced water. Building a desalination plant may reduce a water utility's exposure to water reliability risks at the added expense of an increase in exposure to energy price risk. In dependent on hydropower, electricity prices tend to

  12. Multiple-barrier disinfection by chlorination and UV irradiation for desalinated drinking waters: chlorine photolysis and accelerated lamp-sleeve fouling effects.

    Science.gov (United States)

    Wait, Isaac W

    2008-11-01

    Experiments were conducted to quantify interaction effects between UV irradiation and chlorination for desalinated drinking water. The rate of chlorine photolysis in desalinated water was characterized using a low-pressure UV lamp and chlorine doses typical of drinking water treatment and was found to be lower than reported photolysis rates for treated surface water. Results indicate that, for most desalinated water applications, reduction in free chlorine is likely to be limited, but, depending on the UV dose used, not necessarily negligible. Investigation of the potential for reactor lamp-sleeve fouling included mineral speciation and solubility modeling and showed that chlorination of desalinated water before UV disinfection may increase lamp-sleeve fouling, particularly for point-of-use reactors. UV irradiation before chlorination may minimize fouling. Overall results point to the variable nature of UV lamp-sleeve fouling and chlorine photolysis and an intrinsic dependence on local water chemistry conditions.

  13. Data on daily fluoride intake based on drinking water consumption prepared by household desalinators working by reverse osmosis process

    Directory of Open Access Journals (Sweden)

    Vahid Noroozi Karbasdehi

    2016-09-01

    Full Text Available In this data article, we evaluated the daily fluoride contents in 20 household desalinators working by reverse osmosis (RO1 Reverse Osmosis. process in Bushehr, Iran. The concentration levels of fluoride in inlet and outlet waters were determined by the standard SPADNS method using a spectrophotometer (M501 Single Beam Scanning UV/VIS, UK. The fluoride content in outlet waters were compared with EPA and WHO guidelines for drinking water.

  14. Data on daily fluoride intake based on drinking water consumption prepared by household desalinators working by reverse osmosis process.

    Science.gov (United States)

    Karbasdehi, Vahid Noroozi; Dobaradaran, Sina; Esmaili, Abdolhamid; Mirahmadi, Roghayeh; Ghasemi, Fatemeh Faraji; Keshtkar, Mozhgan

    2016-09-01

    In this data article, we evaluated the daily fluoride contents in 20 household desalinators working by reverse osmosis (RO) process in Bushehr, Iran. The concentration levels of fluoride in inlet and outlet waters were determined by the standard SPADNS method using a spectrophotometer (M501 Single Beam Scanning UV/VIS, UK). The fluoride content in outlet waters were compared with EPA and WHO guidelines for drinking water.

  15. The effect of surface transport on water desalination by porous electrodes undergoing capacitive charging

    CERN Document Server

    Shocron, Amit N

    2016-01-01

    Capacitive deionization (CDI) is a technology in which water is desalinated by ion electrosorption into the electric double layers (EDLs) of charging porous electrodes. In recent years significant advances have been made in modeling the charge and salt dynamics in a CDI cell, but the possible effect of surface transport within diffuse EDLs on these dynamics has not been investigated. We here present theory which includes surface transport in describing the dynamics of a charging CDI cell. Through our numerical solution to the presented models, the possible effect of surface transport on the CDI process is elucidated. While at some model conditions surface transport enhances the rate of CDI cell charging, counter-intuitively this additional transport pathway is found to slow down cell charging at other model conditions.

  16. A lanthanum chelate possessing an open-channel framework with water nanotubes: properties and desalination.

    Science.gov (United States)

    Chen, Mao-Long; Guo, Yi-Chao; Yang, Fang; Liang, Jin-Xia; Cao, Ze-Xing; Zhou, Zhao-Hui

    2014-04-28

    A new type of thermally stable chelate {La(H2O)4[La(1,3-pdta)(H2O)]3}n · 12nH2O (1) [1,3-H4pdtaCH2[CH2N(CH2CO2H)2]2] with an open-channel shows significant and unusual solvent transport properties and demonstrates a use for low-pressure desalination, which is constructed by cheap and available lanthanum salt and 1,3-propanediaminetetraacetate. The chelate could be converted reversibly to its trihydrate {La(H2O)4[La(1,3-pdta)(H2O)]3}n · 3nH2O (1a), dehydrated product {La(H2O)4[La(1,3-pdta)(H2O)]3}n (1b) and ethanol adduct {La(H2O)4[La(1,3-pdta)(H2O)]3}n · 3nH2O · 3nEtOH (1c). The latter nano-confined ethanol shows a remarkable downfield shift (Δδ = 6.0 ppm) for the methylene group in the solid 13C NMR spectrum compared with that of the free EtOH. Crystal 1 with a regular hexagonal appearance can be used directly for saline water desalination on a small-scale at an ambient temperature, demonstrating a low energy consumption and environmentally friendly method. This is attributed to the 10.0 Å hydrophobic open-channel containing water nanotubes (WNTs, Φ = 4.2 Å). The nano-confined WNTs can be removed at a low temperature (45 °C).

  17. Recovery of Fresh Water Resources from Desalination of Brine Produced During Oil and Gas Production Operations

    Energy Technology Data Exchange (ETDEWEB)

    David B. Burnett; Mustafa Siddiqui

    2006-12-29

    for the removal of hydrocarbons from produced water. The results of these experiments show that hydrocarbons from produced water can be reduced from 200 ppm to below 29 ppm level. Experiments were also done to remove the dissolved solids (salts) from the pretreated produced water using desalination membranes. Produced water with up to 45,000 ppm total dissolved solids (TDS) can be treated to agricultural water quality water standards having less than 500 ppm TDS. The Report also discusses the results of field testing of various process trains to measure performance of the desalination process. Economic analysis based on field testing, including capital and operational costs, was done to predict the water treatment costs. Cost of treating produced water containing 15,000 ppm total dissolved solids and 200 ppm hydrocarbons to obtain agricultural water quality with less than 200 ppm TDS and 2 ppm hydrocarbons range between $0.5-1.5 /bbl. The contribution of fresh water resource from produced water will contribute enormously to the sustainable development of the communities where oil and gas is produced and fresh water is a scarce resource. This water can be used for many beneficial purposes such as agriculture, horticulture, rangeland and ecological restorations, and other environmental and industrial application.

  18. Investigation of the knowledge, attitude and performance of people in Behbahan city about using home water desalination devices

    Directory of Open Access Journals (Sweden)

    Zeynab Baboli

    2016-12-01

    Full Text Available Background and objective: Low quality of piped water in Behbahan city and lack of portability of water is the reason of using water desalination systems at homes. Knowledge and attitude have a direct effect on the people’s performance in using thesedevices. Therefore in this study, knowledge, attitude and performance of people in Behbahan city regarding using water desalination devices at home has been investigated. Methods: This is a cross-sectional analytic study conducted in 2015. The study population was all families who were using water desalination devices at home in Behbahan city. Based on the calculations, 172 people were selected randomly to participate in the study. The data collection tool was a researcher made valid and reliable questionnaire (a=0.76. The questionnaire included 4 parts (personal information and questions to measure knowledge, attitude and performance and was completed by participants. The collected data were analyzed by SPSS 16, using ANOVA, independent T-test and Pearson correlation coefficient test at the confidence level of P<0.05. Findings:The mean age of studied people was 37.71 ± 10.39 years. The mean knowledge, attitude and performance scores of participants were 35.33± 19.98, 62.62 ± 13.25 and 66.34 ± 10.84 respectively. The knowledge score was low but the attitude score was more than moderate and it shows that there was a positive attitude towards using water desalination devices. The performance score was more than moderate as well. Conclusion:Findings of this study indicate that education and informing peopleon this issue has been insufficient. The positive attitude of people is due to the better quality of water made by these devices and the low quality of pipe water. The relatively good performance has been due to the instructionprovided by installers and sellers of these devices about the way and time of changing filters.

  19. Conditions of competition between the production of water by desalination and natural resources; Les conditions de concurrence entre la production d'eau par dessalement et les ressources naturelles

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    A close examination of the local supply and demand for fresh water is involved when considering a sea water desalination plant in a given region. This examination makes it possible in most cases to undertake a thorough study of the natural resources, resulting in the use of desalination being rejected. After confirming this fact by precise examples, the authors consider that the preliminary study should be extended, taking into account the complementary character of natural resources and desalination systems: contribution to peak demand, contribution to base demand. This analysis results in a classification of the main user regions according to certain economic criteria defining their suitability for the use of desalination processes. (author) [French] Envisager une installation d'eau de mer dans une region donnee, entraine un examen attentif de l'offre et de la demande locale en eau douce. Cet examen permet de conduire dans la plupart des cas a une etude approfondie des ressources naturelles qui aboutit a ecarter le recours au dessalement. Apres avoir constate ce fait, par des exemples precis, les auteurs estiment que l'on doit pousser plus loin l'etude preliminaire en tenant compte de la complementarite entre les ressources naturelles et les systemes de dessalement: contribution a la demande de pointe, contribution a la demande de base. Cette analyse conduit a classer les regions utilisatrices essentielles selon certains criteres economiques definissant leur aptitude a l'utilisation des procedes de dessalement. (auteur)

  20. Application of China-made RO membranes to the large-scale seawater desalination of a power plant%国产反渗透膜在电厂大型海水淡化项目中的应用

    Institute of Scientific and Technical Information of China (English)

    仲惟雷; 梁宏书; 李燕; 吴宗策; 张彬; 刘枫; 金焱; 梁松苗; 王思亮

    2012-01-01

    Taking the large-scale seawater desalination of a power plant in Shandong as an example, the China-made RO membranes applied to the seawater desalination project is introduced. The results show that this seawater desalination treatment process has been designed reasonably. The water quality of its effluent water meets the tap water and water supply requirements in Shandong, having pretty good environmental and economic benefits. It is of reference value for cities that are of water shortage in coastal areas.%以山东某城市电厂的大型海水淡化工程为实例,介绍了国产反渗透膜在该海水淡化项目中的应用.运行结果表明:以国产反渗透膜为主的海水淡化处理工艺设计合理,出水水质符合该地的自来水供水要求和植被用水要求,具有良好的环境效益和经济效益,对沿海地区缺水城市的发展具有借鉴意义.

  1. Desalination of oil sands process-affected water and basal depressurization water in Fort McMurray, Alberta, Canada: application of electrodialysis.

    Science.gov (United States)

    Kim, Eun-Sik; Dong, Shimiao; Liu, Yang; Gamal El-Din, Mohamed

    2013-01-01

    The high content of inorganic species in water used to extract bitumen from the Alberta oil sands and in the groundwater below the oil sands is an increasing environmental concern. These water matrices require treatment before they can be reused or safely discharged. Desalination of the oil sands process-affected water (OSPW) and groundwater, or basal depressurization water (BDW), can be accomplished with deionization techniques such as electrodialysis (ED). In order to achieve the effective ED treatment, OSPW and BDW were pretreated with coagulation-flocculation-sedimentation to remove solid species and turbidity. We demonstrated that a conductivity range for industrial reuse of OSPW and BDW can be achieved with the ED treatment and showed the possibility of applying ED in the oil sands industry. A continuous ED system that reuses the diluate stream as a source for the concentrate stream was designed. The cost of a hypothetical ED water treatment plant in Fort McMurray, Alberta, was estimated to be C$10.71 per cubic meter of treated water.

  2. Economical analysis of a solar desalination system

    DEFF Research Database (Denmark)

    Chen, Ziqian; Wang, Tie-Zhu; He, Xiao-Rong

    2012-01-01

    Based on the calculation of the single-factor impact values of the parameters of a triple stage tower-type of solar desalination unit by utilizing a single-factor analyzing method, the influences of the cost of solar heating system, the cost of hot water tank, the costs of desalination unit...... and yearly electrical power, the life time of solar desalination unit and the yearly yield of fresh water, on the cost of the fresh water production of the solar desalination unit are studied. It is helpful to do the further investigation on solar desalination systems for reducing the cost of fresh water...

  3. Aquifer Treatment of Sea Water to Remove Natural Organic Matter Before Desalination

    KAUST Repository

    Dehwah, Abdullah H A

    2016-10-18

    An investigation of a sea water reverse osmosis desalination facility located in western Saudi Arabia has shown that aquifer treatment of the raw sea water provides a high degree of removal of natural organic matter (NOM) that causes membrane biofouling. The aquifer is a carbonate system that has a good hydraulic connection to the sea and 14 wells are used to induce sea water movement 400 to 450 m from the sea to the wells. During aquifer transport virtually all of the algae, over 90% of the bacteria, over 90% of the biopolymer fraction of NOM, and high percentages of the humic substance, building blocks, and some of the low molecular weight fractions of NOM are removed. Between 44 and over 90% of the transparent exopolymer particles (TEP) are removed with a corresponding significant reduction in concentration of the colloidal fraction of TEP. The removal rate for TEP appears to be greater in carbonate aquifers compared to siliciclastic systems. Although the production wells range in age from 4 months to 14 years, no significant difference in the degree of water treatment provided by the aquifer was found.

  4. Evaluation of multivariate statistical analyses for monitoring and prediction of processes in an seawater reverse osmosis desalination plant

    Energy Technology Data Exchange (ETDEWEB)

    Kolluri, Srinivas Sahan; Esfahani, Iman Janghorban; Garikiparthy, Prithvi Sai Nadh; Yoo, Chang Kyoo [Kyung Hee University, Yongin (Korea, Republic of)

    2015-08-15

    Our aim was to analyze, monitor, and predict the outcomes of processes in a full-scale seawater reverse osmosis (SWRO) desalination plant using multivariate statistical techniques. Multivariate analysis of variance (MANOVA) was used to investigate the performance and efficiencies of two SWRO processes, namely, pore controllable fiber filterreverse osmosis (PCF-SWRO) and sand filtration-ultra filtration-reverse osmosis (SF-UF-SWRO). Principal component analysis (PCA) was applied to monitor the two SWRO processes. PCA monitoring revealed that the SF-UF-SWRO process could be analyzed reliably with a low number of outliers and disturbances. Partial least squares (PLS) analysis was then conducted to predict which of the seven input parameters of feed flow rate, PCF/SF-UF filtrate flow rate, temperature of feed water, turbidity feed, pH, reverse osmosis (RO)flow rate, and pressure had a significant effect on the outcome variables of permeate flow rate and concentration. Root mean squared errors (RMSEs) of the PLS models for permeate flow rates were 31.5 and 28.6 for the PCF-SWRO process and SF-UF-SWRO process, respectively, while RMSEs of permeate concentrations were 350.44 and 289.4, respectively. These results indicate that the SF-UF-SWRO process can be modeled more accurately than the PCF-SWRO process, because the RMSE values of permeate flowrate and concentration obtained using a PLS regression model of the SF-UF-SWRO process were lower than those obtained for the PCF-SWRO process.

  5. Development of Ultrafiltration Membrane-Separation Technology for Energy-Efficient Water Treatment and Desalination Process

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Woosoon [Univ. of Nevada, Las Vegas, NV (United States); Bae, Chulsung [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2016-10-28

    The growing scarcity of fresh water is a major political and economic challenge in the 21st century. Compared to thermal-based distillation technique of water production, pressure driven membrane-based water purification process, such as ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO), can offer more energy-efficient and environmentally friendly solution to clean water production. Potential applications also include removal of hazardous chemicals (i.e., arsenic, pesticides, organics) from water. Although those membrane-separation technologies have been used to produce drinking water from seawater (desalination) and non-traditional water (i.e., municipal wastewater and brackish groundwater) over the last decades, they still have problems in order to be applied in large-scale operations. Currently, a major huddle of membrane-based water purification technology for large-scale commercialization is membrane fouling and its resulting increases in pressure and energy cost of filtration process. Membrane cleaning methods, which can restore the membrane properties to some degree, usually cause irreversible damage to the membranes. Considering that electricity for creating of pressure constitutes a majority of cost (~50%) in membrane-based water purification process, the development of new nano-porous membranes that are more resistant to degradation and less subject to fouling is highly desired. Styrene-ethylene/butylene-styrene (SEBS) block copolymer is one of the best known block copolymers that induces well defined morphologies. Due to the polarity difference of aromatic styrene unit and saturated ethylene/butylene unit, these two polymer chains self-assemble each other and form different phase-separated morphologies depending on the ratios of two polymer chain lengths. Because the surface of SEBS is hydrophobic which easily causes fouling of membrane, incorporation of ionic group (e,g, sulfonate) to the polymer is necessary to reduces fouling

  6. Pilot-Scale Investigation of Forward/Reverse Osmosis Hybrid System for Seawater Desalination Using Impaired Water from Steel Industry

    Directory of Open Access Journals (Sweden)

    Hanaa M. Ali

    2016-01-01

    Full Text Available This paper was focused on the investigation of a forward osmosis- (FO- reverse osmosis (RO hybrid process to cotreat seawater and impaired water from steel industry. By using this hybrid process, seawater can be diluted before desalination, hence reducing the energy cost of desalination, and simultaneously contaminants present in the impaired water are prevented from migrating into the product water through the FO and RO membranes. The main objective of this work was to investigate on pilot-scale system the performance of the combined FO pretreatment and RO desalination hybrid system and specifically its effects on membrane fouling and overall solute rejection. Firstly, optimization of the pilot-scale FO process to obtain the most suitable and stable operating conditions for practical application was investigated. Secondly, pilot-scale RO process performance as a posttreatment to FO process was evaluated in terms of water flux and rejection. The results indicated that the salinity of seawater reduced from 35000 to 13000 mg/L after 3 hrs using FO system, while after 6 hrs it approached 10000 mg/L. Finally, FO/RO system was tested on continuous operation for 15 hrs and it was demonstrated that no pollutant was detected neither in draw solution nor in RO permeate after the end of operating time.

  7. An exergy approach to efficiency evaluation of desalination

    KAUST Repository

    Ng, Kim Choon

    2017-05-02

    This paper presents an evaluation process efficiency based on the consumption of primary energy for all types of practical desalination methods available hitherto. The conventional performance ratio has, thus far, been defined with respect to the consumption of derived energy, such as the electricity or steam, which are susceptible to the conversion losses of power plants and boilers that burned the input primary fuels. As derived energies are usually expressed by the units, either kWh or Joules, these units cannot differentiate the grade of energy supplied to the processes accurately. In this paper, the specific energy consumption is revisited for the efficacy of all large-scale desalination plants. In today\\'s combined production of electricity and desalinated water, accomplished with advanced cogeneration concept, the input exergy of fuels is utilized optimally and efficiently in a temperature cascaded manner. By discerning the exergy destruction successively in the turbines and desalination processes, the relative contribution of primary energy to the processes can be accurately apportioned to the input primary energy. Although efficiency is not a law of thermodynamics, however, a common platform for expressing the figures of merit explicit to the efficacy of desalination processes can be developed meaningfully that has the thermodynamic rigor up to the ideal or thermodynamic limit of seawater desalination for all scientists and engineers to aspire to.

  8. Using SDI, SDI+ and MFI to evaluate fouling in a UR/RO desalination pilot plant

    NARCIS (Netherlands)

    Al-Hadidi, A.M.M.; Kemperman, A.J.B.; Schurer, H.; Schippers, J.C.; Wessling, M.; Meer, van der W.G.J.

    2012-01-01

    This paper assesses the performance of a UF/RO demonstration plant located in the Oosterschelde estuary in the south-western part of the Netherlands. Spring blooms in the seawater pose a challenge to the plant because of the resulting increased fouling potential of the water. Determinations of the f

  9. Osmotically-assisted desalination method and system

    Science.gov (United States)

    Achilli, Andrea; Childress, Amy E.; Cath, Tzahi Y.

    2014-08-12

    Systems and methods for osmotically assisted desalination include using a pressurized concentrate from a pressure desalination process to pressurize a feed to the desalination process. The depressurized concentrate thereby produced is used as a draw solution for a pressure-retarded osmosis process. The pressure-retarded osmosis unit produces a pressurized draw solution stream that is used to pressurize another feed to the desalination process. In one example, the feed to the pressure-retarded osmosis process is impaired water.

  10. Preparation and water desalination properties of POSS-polyamide nanocomposite reverse osmosis membranes

    KAUST Repository

    Duan, Jintang

    2015-01-01

    The application of nanotechnology to thin-film nanocomposites (TFN) is a new route to enhance membrane performance in water desalination. Here, the potential of polyhedral oligomeric silsesquioxane (POSS) as the nanofiller in polyamide (PA) reverse osmosis membranes was systematically investigated. Four POSS materials (P-8Phenyl, P-8NH3Cl, P-8NH2 and P-1NH2) were introduced into the selective layer by physical blending or chemical fixation during standard interfacial polymerization. Water flux and NaCl rejection were measured with 2000ppm NaCl solution under 15.5bar pressure, and SEM and TEM images of membrane selective layers were obtained. Membranes prepared without POSS showed water flux of 20.0±0.5L/m2·h and salt rejection of 98.0±0.2%. TFN membranes prepared with 0.4% (w/v) P-8Phenyl in the organic phase showed a 65% increase in water flux compared to the pristine PA membrane while maintaining high salt rejection. The selective layer of this membrane maintained the typical ridge-and-valley structure of aromatic PA. Results with P-8NH3Cl and P-8NH2 added to the organic phase were similar. TFN membranes prepared with monoamine P-1NH2 in the organic phase had poor water flux of 3.2L/m2·h, a smooth and more hydrophobic surface, and a much thicker (~400nm) selective layer. One of the four POSS compounds studied, P-8NH3Cl, is sufficiently soluble in water for incorporation into the selective layer via the aqueous phase. Membranes were prepared with P-8NH3Cl in the aqueous phase at varying reaction time, loading, and additive (triethylamine) concentration. With these parameters optimized, water flux increased to 35.4L/m2·h.

  11. Flexible 3D Nanoporous Graphene for Desalination and Bio-decontamination of Brackish Water via Asymmetric Capacitive Deionization.

    Science.gov (United States)

    El-Deen, Ahmed G; Boom, Remko M; Kim, Hak Yong; Duan, Hongwei; Chan-Park, Mary B; Choi, Jae-Hwan

    2016-09-28

    Nanoporous graphene based materials are a promising nanostructured carbon for energy storage and electrosorption applications. We present a novel and facile strategy for fabrication of asymmetrically functionalized microporous activated graphene electrodes for high performance capacitive desalination and disinfection of brackish water. Briefly, thiocarbohydrazide coated silica nanoparticles intercalated graphene sheets are used as a sacrificial material for creating mesoporous graphene followed by alkaline activation process. This fabrication procedure meets the ideal desalination pore diameter with ultrahigh specific surface area ∼ 2680 m(2) g(-1) of activated 3D graphene based micropores. The obtained activated graphene electrode is modified by carboxymethyl cellulose as negative charge (COO(-2)) and disinfectant quaternary ammonium cellulose with positively charged polyatomic ions of the structure (NR4(+)). Our novel asymmetric coated microporous activated 3D graphene employs nontoxic water-soluble binder which increases the surface wettability and decreases the interfacial resistance and moreover improves the electrode flexibility compared with organic binders. The desalination performance of the fabricated electrodes was evaluated by carrying out single pass mode experiment under various cell potentials with symmetric and asymmetric cells. The asymmetric charge coated microporous activated graphene exhibits exceptional electrosorption capacity of 18.43 mg g(-1) at a flow rate of 20 mL min(-1) upon applied cell potential of 1.4 V with initial NaCl concentration of 300 mg L(-1), high charge efficiency, excellent recyclability, and, moreover, good antibacterial behavior. The present strategy provides a new avenue for producing ultrapure water via green capacitive deionization technology.

  12. Characterization of saline groundwater across the coastal aquifer of Israel as resource for desalination

    Science.gov (United States)

    Stein, Shaked; Russak, Amos; Sivan, Orit; Yechieli, Yospeh; Oren, Yoram; Kasher, Roni

    2015-04-01

    In arid countries with access to marine water seawater desalination is becoming an important water source in order to deal with the water scarcity and population growth. Seawater reverse osmosis (RO) facilities use open seawater intake, which requires pretreatment processes to remove particles in order to avoid fouling of the RO membrane. In small and medium size desalination facilities, an alternative water source can be saline groundwater in coastal aquifers. Using saline groundwater from boreholes near the shore as feed water may have the advantage of natural filtration and low organic content. It will also reduce operation costs of pretreatment. Another advantage of using groundwater is its availability in highly populated areas, where planning of large RO desalination plants is difficult and expensive due to real-estate prices. Pumping saline groundwater underneath the freshwater-seawater interface (FSI) might shift the interface towards the sea, thus rehabilitating the fresh water reservoirs in the aquifer. In this research, we tested the potential use of saline groundwater in the coastal aquifer of Israel as feed water for desalination using field work and desalination experiments. Specifically, we sampled the groundwater from a pumping well 100 m from the shore of Tel-Aviv and sea water from the desalination plant in Ashqelon, Israel. We used an RO cross flow system in a pilot plant in order to compare between the two water types in terms of permeate flux, permeate flux decline, salt rejection of the membrane and the fouling on the membrane. The feed, brine and fresh desalinated water from the outlet of the desalination system were chemically analyzed and compared. Field measurements of dissolved oxygen, temperature, pH and salinity were also conducted in situ. Additionally, SDI (silt density index), which is an important index for desalination, and total organic carbon that has a key role in organic fouling and development of biofouling, were measured and

  13. 新型海水淡化装置经济性分析%Economic Analysis of the New Desalination Plant

    Institute of Scientific and Technical Information of China (English)

    周升辉; 武金燕

    2016-01-01

    Fresh water is a human survival and production indispensable or alternative precious resource.The islands of the South China Sea a serious lack of fresh water resources,fresh water supply is mainly shipping supply and rainwater harvesting existing desalination plants not only high running costs and the need to consume extra energy,and the South China Sea islands from the mainland,but also need to maintain their operation power supply,if more increased electricity demand for desalination,power will bring great pressure,for proposed use of solar thermal energy cascade ocean desalination and organic Rankine cycle power plant.The device to be improved on the basis of existing solar desalination systems on the use of sea water and solar heating and cooling by flashing to obtain fresh water,an organic Rankine cycle recovery flash steam condensing heat for power generation,and in an organic Rankine the cold end of the cycle is introduced deep waters,in order to increase the temperature difference between the heat source and the cold source and to improve the efficiency of organic Rankine cycle,with energy saving,efficient use of the characteristics of very broad application prospects.%淡水是人类赖以生存和生产的不可缺少或替代的宝贵资源。我国南海各岛屿严重缺乏淡水资源,淡水的供应主要是船运供应和收集雨水,现有的海水淡化装置不仅运行费用高且需要消耗额外的能源,并且南海各岛屿远离大陆,维持自身运作也需要电力供应,若再增加用于海水淡化的电力需求,将带来极大的供电压力,为此提出利用太阳能海洋温差能复叠式海水淡化及有机朗肯循环发电装置。本装置在现有太阳能海水淡化系统的基础上加以改进,利用太阳能加热海水并通过闪蒸及冷却以获得淡水,利用有机朗肯循环回收闪蒸蒸汽的冷凝热用于发电,并在有机朗肯循环的冷端引入深层海水,以增加热源与

  14. FY 2000 report on the basic survey to promote Joint Implementation, etc. Project for improvement of efficiency of the power generation/desalination plant in Aktau City; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Aktau shi hatsuden zosui plant koritsu kaizen jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of conserving energy and reducing greenhouse effect gas emission, feasibility study was conducted for improvement of efficiency of power generation/desalination facilities at MAEK Energy Center, Aktau City, Manghistau, Kazakhstan. Presently, the main facilities are the conventional natural gas fired power plant, evaporation type seawater desalination facility, hot water production facility, etc. In the project, introduction of the following was planned to be made: cogeneration facility composed of two units of 1,100-degree C class gas turbine and reverse osmosis (RO) type desalination facility for drinking water production with a capacity of 50,000 t/d. As a result of the study, the energy conservation amount in this project was 151,900-165,400 toe/y in power generation facility, and the greenhouse effect gas reduction amount was 355,000-387,000 t-CO2/y in power generation facility and 268,000 t-CO2/y in desalination facility. The construction cost and operational cost of the plant were 45.7 billion yen and 2.8 billion yen/y. In the economical estimation, ROI and ROE before tax were 7.4 and 34.8, respectively, which were considered to be appropriate values as social infrastructure related conditions. (NEDO)

  15. The Energy-Water Nexus: Spatially-Resolved Analysis of the Potential for Desalinating Brackish Groundwater by Use of Solar Energy

    Directory of Open Access Journals (Sweden)

    Jill B. Kjellsson

    2015-06-01

    Full Text Available This research looks at coupling desalination with renewable energy sources to create a high-value product (treated water from two low value resources (brackish groundwater and intermittent solar energy. Desalination of brackish groundwater is already being considered as a potential new water supply in Texas. This research uses Texas as a testbed for spatially-resolved analysis techniques while considering depth to brackish groundwater, water quality, and solar radiation across Texas to determine the locations with the best potential for integrating solar energy with brackish groundwater desalination. The framework presented herein can be useful for policymakers, regional planners, and project developers as they consider where to site desalination facilities coupled with solar photovoltaics. Results suggest that the northwestern region of Texas—with abundant sunshine and groundwater at relatively shallow depths and low salinity in areas with freshwater scarcity—has the highest potential for solar powered desalination. The range in capacity for solar photovoltaic powered reverse osmosis desalination was found to be 1.56 × 10—6 to 2.93 × 10—5 cubic meters of water per second per square meter of solar panel (m3/s/m2.

  16. Desalination of water by vapor-phase transport through hydrophobic nanopores

    Science.gov (United States)

    Lee, Jongho; Karnik, Rohit

    2010-08-01

    We propose a new approach to desalination of water whereby a pressure difference across a vapor-trapping nanopore induces selective transport of water by isothermal evaporation and condensation across the pore. Transport of water through a nanopore with saline water on one side and pure water on the other side under a pressure difference was theoretically analyzed under the rarefied gas assumption using a probabilistic framework that accounts for diffuse scattering from the pore walls as well as reflection from the menisci. The analysis revealed that in addition to salinity, temperature, and pressure difference, the nanopore aspect ratio and the probability of condensation of a water molecule incident on a meniscus from the vapor phase, known as the condensation coefficient, are key determinants of flux. The effect of condensation coefficient on mass flux becomes critical when the aspect ratio is small. However, the mass flux becomes independent of the condensation coefficient as the pore aspect ratio increases, converging to the Knudsen flux for long nanopores. For design of a nanopore membrane that can trap vapor, a minimum aspect ratio is derived for which coalescence of the two interfaces on either side of the nanopore remains energetically unfavorable. Based on this design criterion, the analysis suggests that mass flux in the range of 20-70 g/m2 s may be feasible if the system is operated at temperatures in the range of 30-50 °C. The proposed approach further decouples transport properties from material properties of the membrane, which opens the possibility of engineering membranes with appropriate materials that may lead to reverse osmosis membranes with improved flux, better selectivity, and high chlorine resistance.

  17. Use of drinking water treatment solids for arsenate removal from desalination concentrate.

    Science.gov (United States)

    Xu, Xuesong; Lin, Lu; Papelis, Charalambos; Myint, Maung; Cath, Tzahi Y; Xu, Pei

    2015-05-01

    Desalination of impaired water can be hindered by the limited options for concentrate disposal. Selective removal of specific contaminants using inexpensive adsorbents is an attractive option to address the challenges of concentrate management. In this study, two types of ferric-based drinking water treatment solids (DWTS) were examined for arsenate removal from reverse osmosis concentrate during continuous-flow once-through column experiments. Arsenate sorption was investigated under different operating conditions including pH, arsenate concentration, hydraulic retention time, loading rate, temperature, and moisture content of the DWTS. Arsenate removal by the DWTS was affected primarily by surface complexation, electrostatic interactions, and arsenate speciation. Results indicated that arsenate sorption was highly dependent on initial pH and initial arsenate concentration. Acidic conditions enhanced arsenate sorption as a result of weaker electrostatic repulsion between predominantly monovalent H2AsO4(-) and negatively charged particles in the DWTS. High initial arsenate concentration increased the driving force for arsenate sorption to the DWTS surface. Tests revealed that the potential risks associated with the use of DWTS include the leaching of organic contaminants and ammonia, which can be alleviated by using wet DWTS or discarding the initially treated effluent that contains high organic concentration.

  18. INNOVATIVE FRESH WATER PRODUCTION PROCESS FOR FOSSIL FUEL PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    James F. Klausner; Renwei Mei; Yi Li; Mohamed Darwish; Diego Acevedo; Jessica Knight

    2003-09-01

    This report describes the annual progress made in the development and analysis of a Diffusion Driven Desalination (DDD) system, which is powered by the waste heat from low pressure condensing steam in power plants. The desalination is driven by water vapor saturating dry air flowing through a diffusion tower. Liquid water is condensed out of the air/vapor mixture in a direct contact condenser. A thermodynamic analysis demonstrates that the DDD process can yield a fresh water production efficiency of 4.5% based on a feed water inlet temperature of only 50 C. An example is discussed in which the DDD process utilizes waste heat from a 100 MW steam power plant to produce 1.51 million gallons of fresh water per day. The main focus of the initial development of the desalination process has been on the diffusion tower. A detailed mathematical model for the diffusion tower has been described, and its numerical implementation has been used to characterize its performance and provide guidance for design. The analysis has been used to design a laboratory scale diffusion tower, which has been thoroughly instrumented to allow detailed measurements of heat and mass transfer coefficient, as well as fresh water production efficiency. The experimental facility has been described in detail.

  19. INNOVATIVE FRESH WATER PRODUCTION PROCESS FOR FOSSIL FUEL PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    James F. Klausner; Renwei Mei; Yi Li; Mohamed Darwish; Diego Acevedo; Jessica Knight

    2003-09-01

    This report describes the annual progress made in the development and analysis of a Diffusion Driven Desalination (DDD) system, which is powered by the waste heat from low pressure condensing steam in power plants. The desalination is driven by water vapor saturating dry air flowing through a diffusion tower. Liquid water is condensed out of the air/vapor mixture in a direct contact condenser. A thermodynamic analysis demonstrates that the DDD process can yield a fresh water production efficiency of 4.5% based on a feed water inlet temperature of only 50 C. An example is discussed in which the DDD process utilizes waste heat from a 100 MW steam power plant to produce 1.51 million gallons of fresh water per day. The main focus of the initial development of the desalination process has been on the diffusion tower. A detailed mathematical model for the diffusion tower has been described, and its numerical implementation has been used to characterize its performance and provide guidance for design. The analysis has been used to design a laboratory scale diffusion tower, which has been thoroughly instrumented to allow detailed measurements of heat and mass transfer coefficient, as well as fresh water production efficiency. The experimental facility has been described in detail.

  20. The Dynamic Characteristic Analysis of the Water Lubricated Bearing-Rotor System in Seawater Desalination Pump

    Directory of Open Access Journals (Sweden)

    Xiaoyan Ye

    2014-05-01

    Full Text Available In order to study the water lubricated bearing-rotor system in seawater desalination pump, this paper is based on the coupling between the lubricating flow field and the rotor dynamics. The fluid-solid interaction (FSI method, Rigid Body, was adopted to study the journal orbit of the bearing-rotor system under the periodic unbalancing load. The influences of geometric and working parameter to the journal orbit were combined to analyze the stability and reliability of the bearing-rotor system. The result shows that increasing the rotating speed would increase the journal whirling amplitude and the system sensitivity to the external excitation and unbalancing load were promoted; increasing the aspect ratio would reduce the journal whirling amplitude and cause the system to be more unstable; increasing the inlet pressure would reduce the journal whirling amplitude and cause the system to be more unstable; increasing the unbalancing load would reduce the stability margin and the system is easy to be unstable if obstructed; increasing the radial clearance would reduce the journal whirling amplitude and cause the system to be more unstable. The attitude angle has no influence on the journal whirling amplitude but would influence the stability of system and the value of attitude angle should not be large.

  1. Effect of shear rate on the performance of nanofiltration membrane for water desalination

    Directory of Open Access Journals (Sweden)

    Ahmad Fausi Ismail

    2002-11-01

    Full Text Available Asymmetric nanofiltration membranes were fabricated from a ternary dope composition consisting of cellulose acetate (CA, formamide and acetone using a simple dry/wet phase inversion process. In order to fabricate a high performance nanofiltration membrane, the effects of rheological factor of dope solutions, that is shear rate on the performance of nanofiltration membranes for water desalination has been studied. The membranes performances that are based on percentage of rejection of sodium chloride (NaCl and fluxes with different concentrations of sodium chloride are reported. Generally, the percentage of rejection and fluxes were found to increase with increasing of shear rate until a critical level of shear rate is achieved. The experimental results showed that the fluxes were increased and percentage of rejection is decreased with sodium chloride concentrations. An optimum percentage of rejection and fluxes obtained were about 56.76% and 7.44 × 10-4 m/s, respectively. The optimum shear rate was found to be at 304 s-1. It was also found that membranes with shear rate below 152s-1 are not suitable to be used as a nanofiltration membrane due to their low mechanical strength.

  2. RO-75: a FORTRAN code for calculation and design optimization of reverse osmosis seawater desalination plants

    Energy Technology Data Exchange (ETDEWEB)

    Glueckstern, P.; Reed, S.A.; Wilson, J.V.

    1976-11-01

    The reverse osmosis process has been used extensively for the conversion of brackish waters to potable water. The process is now nearing commercialization as a means for the conversion of seawater. The computer program (RO-75) is a Fortran code for the optimizatin of the design and economics of seawater reverse osmosis plants. The examples described are based on currently available, commercial membrane modules and prevailing prices. However, the code is very flexible and can be used to optimize plants utilizing future technological improvements and different economic parameters.

  3. Economical analysis and study on a solar desalination unit

    DEFF Research Database (Denmark)

    Based on the calculation of the single-factor impact values of the parameters of a triple tower-type solar desalination unit on the cost of fresh water production by utilizing a single-factor analyzing method, the influences of the cost of solar heating system, the cost of hot water tank, the costs...... of desalination unit and electrical power, the life time of solar desalination unit and the yearly yield of fresh water, on the cost of the fresh water production of the solar desalination unit are studied. It is helpful for the further investigation of solar desalination and for reducing the cost of fresh water...... production for solar desalination units....

  4. Can the Adoption of Desalination Technology Lead to Aquifer Preservation? A Case Study of a Sociotechnical Water System in Baja California Sur, Mexico

    Directory of Open Access Journals (Sweden)

    Jamie McEvoy

    2015-09-01

    Full Text Available There is growing concern about the sustainability of groundwater supplies worldwide. In many regions, desalination—the conversion of saline water to freshwater—is viewed as a way to increase water supplies and reduce pressure on overdrawn aquifers. Using data from reports, articles, interviews, a survey, and a focus group, this paper examines if, and how, the adoption of desalination technology can lead to aquifer preservation in Baja California Sur (BCS, Mexico. The paper outlines existing institutional arrangements (i.e., laws, rules, norms, or organizations surrounding desalination in BCS and concludes that there are currently no effective mechanisms to ensure aquifer preservation. Four mechanisms that could be implemented to improve groundwater management are identified, including: 1 integrated water-and land-use planning; 2 creation of an institute responsible for coordinated and consistent planning; 3 improved groundwater monitoring; and 4 implementation of water conservation measures prior to the adoption of desalination technology. This paper concludes that viewing water technologies, including desalination, as sociotechnical systems—i.e., a set of technological components that are embedded in complex social, political, and economic contexts—has the potential to create a more sustainable human–environment–technology relationship. By assessing desalination technology as a sociotechnical system, this study highlights the need to focus on institutional development and capacity building, especially within local water utilities and urban planning agencies.

  5. Photosynthetic microbial desalination cells (PMDCs) for clean energy, water and biomass production.

    Science.gov (United States)

    Kokabian, Bahareh; Gude, Veera Gnaneswar

    2013-12-01

    Current microbial desalination cell (MDC) performances are evaluated with chemical catalysts such as ferricyanide, platinum catalyzed air-cathodes or aerated cathodes. All of these methods improve power generation potential in MDCs, however, they are not preferable for large scale applications due to cost, energy and environmental toxicity issues. In this study, performance of microbial desalination cells with an air cathode and an algae biocathode (Photosynthetic MDC - PMDC) were evaluated, both under passive conditions (no mechanical aeration or mixing). The results indicate that passive algae biocathodes perform better than air cathodes and enhance COD removal and utilize treated wastewater as the growth medium to obtain valuable biomass for high value bioproducts. Maximum power densities of 84 mW m(-3) (anode volume) or 151 mW m(-3) (biocathode volume) and a desalination rate of 40% were measured with 0.9 : 1 : 0.5 volumetric ratios of anode, desalination and algae biocathode chambers respectively. This first proof-of-concept study proves that the passive mechanisms can be beneficial in enhancing the sustainability of microbial desalination cells.

  6. Direct seawater desalination by ion concentration polarization.

    Science.gov (United States)

    Kim, Sung Jae; Ko, Sung Hee; Kang, Kwan Hyoung; Han, Jongyoon

    2010-04-01

    A shortage of fresh water is one of the acute challenges facing the world today. An energy-efficient approach to converting sea water into fresh water could be of substantial benefit, but current desalination methods require high power consumption and operating costs or large-scale infrastructures, which make them difficult to implement in resource-limited settings or in disaster scenarios. Here, we report a process for converting sea water (salinity approximately 500 mM or approximately 30,000 mg l(-1)) to fresh water (salinity water is divided into desalted and concentrated streams by ion concentration polarization, a phenomenon that occurs when an ion current is passed through ion-selective membranes. During operation, both salts and larger particles (cells, viruses and microorganisms) are pushed away from the membrane (a nanochannel or nanoporous membrane), which significantly reduces the possibility of membrane fouling and salt accumulation, thus avoiding two problems that plague other membrane filtration methods. To implement this approach, a simple microfluidic device was fabricated and shown to be capable of continuous desalination of sea water (approximately 99% salt rejection at 50% recovery rate) at a power consumption of less than 3.5 Wh l(-1), which is comparable to current state-of-the-art systems. Rather than competing with larger desalination plants, the method could be used to make small- or medium-scale systems, with the possibility of battery-powered operation.

  7. Ruled-based control of off-grid desalination powered by renewable energies

    Directory of Open Access Journals (Sweden)

    Alvaro Serna

    2015-08-01

    Full Text Available A rule-based control is presented for desalination plants operating under variable, renewable power availability. This control algorithm is based on two sets of rules: first, a list that prioritizes the reverse osmosis (RO units of the plant is created, based on the current state and the expected water demand; secondly, the available energy is then dispatched to these units following this prioritized list. The selected strategy is tested on a specific case study: a reverse osmosis plant designed for the production of desalinated water powered by wind and wave energy. Simulation results illustrate the correct performance of the plant under this control.

  8. LT-MED process for cogeneration and sea water desalination. El proceso LT-MED para cogeneracion y desalinizacion de Agua de mar

    Energy Technology Data Exchange (ETDEWEB)

    Ophir, A.; Gendel, A.; Kronenberg, G.

    1994-01-01

    The desalination plants at low temperature, with maximum temperatures of brine until 70 degree centigree , have low level of corrosion and fouling, the principal problem in conventional plants of high temperature distillation. More them 250 plants were developed by IDE Technologies Ltd. in the world. The first in Spain was in 1967. The plants use surface condensers of horizontal tubes and drown films in Vapor compression (LT-VC) and multi-effect distillation (LT-MED)

  9. STUDY ON DESALINATION OF SALT WATER BY THE RE FRIGERATION METHOD.%盐水冷冻淡化研究

    Institute of Scientific and Technical Information of China (English)

    乌志明; 邓小川

    2001-01-01

    进行了低浓度盐溶液的冷冻及含盐冰的部分融化实验,实验表明柴达木盆地盐湖区的盐水可通过自然冷冻实现浓淡分离,盐溶液自然冷冻以及含盐冰部分融化的脱盐效果都有相应的最适宜温度范围,所以随着冷季温度的变化处理相应浓度的盐水才能取得最佳效果。%The experiments of the refrigeration of diluted salt water and the partial melting of salt - containing ice to acquire fresh water have been done. The results indicate that the salt water in the lake areas of the Chaidam Basin can be desalinated. To achieve ideal effects for the desalination by the natural refrigeration - partial melting method,the optimum range of temprature must be provided. Therefore, processing certain concentration of salt water in accordance with the variation of temperature in the freezing weather, the best separation results can be obtained.

  10. Reasons for the Fast Growing Seawater Desalination Capacity in Algeria

    KAUST Repository

    Drouiche, Nadjib

    2011-05-24

    Seawater/brackish water desalination has been widely adopted by the Algerian Government in the last few years to supply potable water to municipality for various purposes mainly for domestic and industrial uses especially in areas where demand is high due to shortage of fresh water resources, rapid population growth and development of industry and tourism. Ten years ago, desalination was confined to the industrial use only especially in oil and gas industry as the country was relying on rain water and other available sources to supply fresh water to municipalities. Due to chronic drought conditions, the Ministry of Water Resources reviewed the national water strategy and a strong option for desalination was adopted where an ambitious program was thus put into action. Sixteen mega-plants, with capacities ranging from 100,000 to 500,000 m3 per day, primarily based on Reverse Osmosis technology, were launched in the last few years making the Algerian desalination program one of the world\\'s fastest growing markets. Five desalination plants, including the Africa\\'s largest seawater reverse osmosis project with a total capacity of 200,000 m3 per day, are already in operation and the remaining projects are either under construction or in commissioning. An integrated water resources management was also adopted as additional option to cuter the increasing water demand as there is also a great potential for water reuse and conventional water treatment. An additional benefit of this would be reducing the volume of treated wastewater disposed into the environment. © 2011 Springer Science+Business Media B.V.

  11. Purification of High Salinity Brine by Multi-Stage Ion Concentration Polarization Desalination

    Science.gov (United States)

    Kim, Bumjoo; Kwak, Rhokyun; Kwon, Hyukjin J.; Pham, Van Sang; Kim, Minseok; Al-Anzi, Bader; Lim, Geunbae; Han, Jongyoon

    2016-01-01

    There is an increasing need for the desalination of high concentration brine (>TDS 35,000 ppm) efficiently and economically, either for the treatment of produced water from shale gas/oil development, or minimizing the environmental impact of brine from existing desalination plants. Yet, reverse osmosis (RO), which is the most widely used for desalination currently, is not practical for brine desalination. This paper demonstrates technical and economic feasibility of ICP (Ion Concentration Polarization) electrical desalination for the high saline water treatment, by adopting multi-stage operation with better energy efficiency. Optimized multi-staging configurations, dependent on the brine salinity values, can be designed based on experimental and numerical analysis. Such an optimization aims at achieving not just the energy efficiency but also (membrane) area efficiency, lowering the true cost of brine treatment. ICP electrical desalination is shown here to treat brine salinity up to 100,000 ppm of Total Dissolved Solids (TDS) with flexible salt rejection rate up to 70% which is promising in a various application treating brine waste. We also demonstrate that ICP desalination has advantage of removing both salts and diverse suspended solids simultaneously, and less susceptibility to membrane fouling/scaling, which is a significant challenge in the membrane processes. PMID:27545955

  12. Purification of High Salinity Brine by Multi-Stage Ion Concentration Polarization Desalination

    Science.gov (United States)

    Kim, Bumjoo; Kwak, Rhokyun; Kwon, Hyukjin J.; Pham, Van Sang; Kim, Minseok; Al-Anzi, Bader; Lim, Geunbae; Han, Jongyoon

    2016-08-01

    There is an increasing need for the desalination of high concentration brine (>TDS 35,000 ppm) efficiently and economically, either for the treatment of produced water from shale gas/oil development, or minimizing the environmental impact of brine from existing desalination plants. Yet, reverse osmosis (RO), which is the most widely used for desalination currently, is not practical for brine desalination. This paper demonstrates technical and economic feasibility of ICP (Ion Concentration Polarization) electrical desalination for the high saline water treatment, by adopting multi-stage operation with better energy efficiency. Optimized multi-staging configurations, dependent on the brine salinity values, can be designed based on experimental and numerical analysis. Such an optimization aims at achieving not just the energy efficiency but also (membrane) area efficiency, lowering the true cost of brine treatment. ICP electrical desalination is shown here to treat brine salinity up to 100,000 ppm of Total Dissolved Solids (TDS) with flexible salt rejection rate up to 70% which is promising in a various application treating brine waste. We also demonstrate that ICP desalination has advantage of removing both salts and diverse suspended solids simultaneously, and less susceptibility to membrane fouling/scaling, which is a significant challenge in the membrane processes.

  13. Purification of High Salinity Brine by Multi-Stage Ion Concentration Polarization Desalination.

    Science.gov (United States)

    Kim, Bumjoo; Kwak, Rhokyun; Kwon, Hyukjin J; Pham, Van Sang; Kim, Minseok; Al-Anzi, Bader; Lim, Geunbae; Han, Jongyoon

    2016-08-22

    There is an increasing need for the desalination of high concentration brine (>TDS 35,000 ppm) efficiently and economically, either for the treatment of produced water from shale gas/oil development, or minimizing the environmental impact of brine from existing desalination plants. Yet, reverse osmosis (RO), which is the most widely used for desalination currently, is not practical for brine desalination. This paper demonstrates technical and economic feasibility of ICP (Ion Concentration Polarization) electrical desalination for the high saline water treatment, by adopting multi-stage operation with better energy efficiency. Optimized multi-staging configurations, dependent on the brine salinity values, can be designed based on experimental and numerical analysis. Such an optimization aims at achieving not just the energy efficiency but also (membrane) area efficiency, lowering the true cost of brine treatment. ICP electrical desalination is shown here to treat brine salinity up to 100,000 ppm of Total Dissolved Solids (TDS) with flexible salt rejection rate up to 70% which is promising in a various application treating brine waste. We also demonstrate that ICP desalination has advantage of removing both salts and diverse suspended solids simultaneously, and less susceptibility to membrane fouling/scaling, which is a significant challenge in the membrane processes.

  14. The potential of solar-driven humidification-dehumidification desalination for small-scale decentralized water production

    Energy Technology Data Exchange (ETDEWEB)

    Narayan, G. Prakash; Sharqawy, Mostafa H.; Summers, Edward K.; Lienhard, John H. [Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge (United States); Zubair, Syed M.; Antar, M.A. [Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals (Saudi Arabia)

    2010-05-15

    World-wide water scarcity, especially in the developing world, indicates a pressing need to develop inexpensive, decentralized small-scale desalination technologies which use renewable resources of energy. This paper provides a comprehensive review of the state-of-the-art in one of the most promising of these technologies, solar-driven humidification-dehumidification (HDH) desalination. Previous studies have investigated many different variations on the HDH cycle. In this paper, performance parameters which enable comparison of the various versions of the HDH cycle have been defined and evaluated. To better compare these cycles, each has been represented in psychometric coordinates. The principal components of the HDH system are also reviewed and compared, including the humidifier, solar heaters, and dehumidifiers. Particular attention is given to solar air heaters, for which design data is limited; and direct air heating is compared to direct water heating in the cycle assessments. Alternative processes based on the HDH concept are also reviewed and compared. Further, novel proposals for improvement of the HDH cycle are outlined. It is concluded that HDH technology has great promise for decentralized small-scale water production applications, although additional research and development is needed for improving system efficiency and reducing capital cost. (author)

  15. Fundamental measure theory for the electric double layer: implications for blue-energy harvesting and water desalination

    Science.gov (United States)

    Härtel, Andreas; Janssen, Mathijs; Samin, Sela; van Roij, René

    2015-05-01

    Capacitive mixing (CAPMIX) and capacitive deionization (CDI) are promising candidates for harvesting clean, renewable energy and for the energy efficient production of potable water, respectively. Both CAPMIX and CDI involve water-immersed porous carbon (supercapacitors) electrodes at voltages of the order of hundreds of millivolts, such that counter-ionic packing is important for the electric double layer (EDL) which forms near the surfaces of these porous materials. Thus, we propose a density functional theory (DFT) to model the EDL, where the White-Bear mark II fundamental measure theory functional is combined with a mean-field Coulombic and a mean spherical approximation-type correction to describe the interplay between dense packing and electrostatics, in good agreement with molecular dynamics simulations. We discuss the concentration-dependent potential rise due to changes in the chemical potential in capacitors in the context of an over-ideal theoretical description and its impact on energy harvesting and water desalination. Compared to less elaborate mean-field models our DFT calculations reveal a higher work output for blue-energy cycles and a higher energy demand for desalination cycles.

  16. Recent developments in thermally-driven seawater desalination: Energy efficiency improvement by hybridization of the MED and AD cycles

    KAUST Repository

    Ng, Kim Choon

    2015-01-01

    The energy, water and environment nexus is a crucial factor when considering the future development of desalination plants or industry in the water-stressed economies. New generation of desalination processes or plants has to meet the stringent environment discharge requirements and yet the industry remains highly energy efficient and sustainable when producing good potable water. Water sources, either brackish or seawater, have become more contaminated as feed while the demand for desalination capacities increase around the world. One immediate solution for energy efficiency improvement comes from the hybridization of the proven desalination processes to the newer processes of desalination: For example, the integration of the available thermally-driven to adsorption desalination (AD) cycles where significant thermodynamic synergy can be attained when cycles are combined. For these hybrid cycles, a quantum improvement in energy efficiency as well as in increase in water production can be expected. The advent of MED with AD cycles, or simply called the MEDAD cycles, is one such example where seawater desalination can be pursued and operated in cogeneration with the electricity production plants: The hybrid desalination cycles utilize only the low exergy bled-steam at low temperatures, complemented with waste exhaust or renewable solar thermal heat at temperatures between 60 and 80. °C. In this paper, the authors have reported their pioneered research on aspects of AD and related hybrid MEDAD cycles, both at theoretical models and experimental pilots. Using the cogeneration of electricity and desalination concept, the authors examined the cost apportionment of fuel cost by the quality or exergy of working steam for such cogeneration configurations.

  17. Energy issues in desalination processes.

    Science.gov (United States)

    Semiat, Raphael

    2008-11-15

    Water, energy, and environmental issues are closely related. New water techniques consume energy, and innovative renewable energy techniques using biofuels and biodiesel consume an incredible amount of water. Different desalination techniques that consume different energy levels from different sources are in use today. Some people, environmentalists, decision makers, and even scientists, mainly in nonscientific publications, consider energy consumption in desalination to be too high and are seeking new ways of reducing it, which often involves increasing capital investment. Efforts should be directed at reducing not only energy consumption but also total water cost. A competent grasp of thermodynamics and heat and mass transfer theory, as well as a proper understanding of current desalination processes, is essential for ensuring beneficial improvements in desalination processes. Thermodynamics sets the absolute minimum limit of the work energy required to separate water from a salt solution. Unavoidable irreversibilities augment the actual energy consumption, yet modern desalination techniques have succeeded in considerably narrowing the gap between actual and limiting energy levels. The implication of this smaller gap is that only marginal energy reductions are possible. The current energy consumption of different desalination processes is reviewed in this paper. A comparison with other common energy-consuming ventures leads to some interesting conclusions.

  18. Offshore Desalination Using Wave Energy

    Directory of Open Access Journals (Sweden)

    Álvaro Serna

    2013-01-01

    Full Text Available This paper evaluates the design of an offshore desalination plant currently under preliminary development. The purpose is to test the feasibility of producing drinkable water using wave energy in out-of-sight installations, as an alternative for those locations where land use, civil engineering works, and/or environmental impact make a coast-based solution inadequate. After describing the components, a proposal for sizing them is studied, based on using buoy-measured data at the expected location and their mathematical models of the different sections of the plant. Finally, by using measured buoy data, the influence of sizing on the expected performance is studied for a specific location, and one of the designs is developed in detail.

  19. The Winddrinker. Brackish water desalination in Somalia by means of wind energy; De Winddrinker. Brak water ontzilting in Somaliland door middel van windenergie

    Energy Technology Data Exchange (ETDEWEB)

    Generaal, C. [Faculteit Luchtvaart- en Ruimtetechniek, Technische Universiteit Delft TUD, Delft (Netherlands)

    2011-04-15

    The Winddrinker turns salt water into clean drinking water utilizing solely wind energy. It is a promising solution to solve water problems in dry coastal areas of developing countries. The Winddrinker combines a windmill and a desalination pump in the most efficient way. A mechanical coupling ensures a cheap, simple and reliable technology. [Dutch] De Winddrinker kan brak water ontzouten en veranderen in drinkwater met behulp van wind energie. Het is een veelbelovende oplossing voor het drinkwaterprobleem in droge kustgebieden in ontwikkelingslanden. De Winddrinker is een zeer efficient systeem bestaande uit een windmolen en een ontziltingspomp. Een mechanische koppeling zorgt voor een goedkope, eenvoudige en betrouwbare technologie.

  20. Microbial desalination cells for energy production and desalination

    KAUST Repository

    Kim, Younggy

    2013-01-01

    Microbial desalination cells (MDCs) are a new, energy-sustainable method for using organic matter in wastewater as the energy source for desalination. The electric potential gradient created by exoelectrogenic bacteria desalinates water by driving ion transport through a series of ion-exchange membranes (IEMs). The specific MDC architecture and current conditions substantially affect the amount of wastewater needed to desalinate water. Other baseline conditions have varied among studies making comparisons of the effectiveness of different designs problematic. The extent of desalination is affected by water transport through IEMs by both osmosis and electroosmosis. Various methods have been used, such as electrolyte recirculation, to avoid low pH that can inhibit exoelectrogenic activity. The highest current density in an MDC to date is 8.4A/m2, which is lower than that produced in other bioelectrochemical systems. This implies that there is a room for substantial improvement in desalination rates and overall performance. We review here the state of the art in MDC design and performance, safety issues related to the use of MDCs with wastewater, and areas that need to be examined to achieve practical application of this new technology. © 2012 Elsevier B.V.

  1. Energy system impacts of desalination in Jordan

    Directory of Open Access Journals (Sweden)

    Poul Alberg Østergaard

    2014-02-01

    Full Text Available Climate change mitigation calls for energy systems minimising end-use demands, optimising the fuel efficiency of conversion systems, increasing the use of renewable energy sources and exploiting synergies wherever possible. In parallel, global fresh water resources are strained due to amongst others population and wealth increase and competitive water uses from agriculture and industry is causing many nations to turn to desalination technologies. This article investigates a Jordanian energy scenario with two different desalination technologies; reverse osmosis (RO driven by electricity and Multi Stage Flash (MSF desalination driven by Cogeneration of Heat and Power (CHP. The two systems impact the energy systems in different ways due to the technologies’ particular characteristics. The systems are analyses in the energy systems analysis model EnergyPLAN to determine the impacts on energy system performance. Results indicate that RO and MSF are similar in fuel use. While there is no use of waste heat from condensing mode plants, efficiencies for CHP and MSF are not sufficiently good to results in lower fuel usage than RO. The Jordanian energy system is somewhat inflexible giving cause to Critical Excess Electricity Production (CEEP even at relatively modest wind power penetrations. Here RO assists the energy system in decreasing CEEP – and even more if water storage is applied.

  2. Assessment of the abiotic and biotic effects of sodium metabisulphite pulses discharged from desalination plant chemical treatments on seagrass (Cymodocea nodosa) habitats in the Canary Islands.

    Science.gov (United States)

    Portillo, E; Ruiz de la Rosa, M; Louzara, G; Ruiz, J M; Marín-Guirao, L; Quesada, J; González, J C; Roque, F; González, N; Mendoza, H

    2014-03-15

    Reverse osmosis membranes at many desalination plants are disinfected by periodic shock treatments with sodium metabisulphite, which have potentially toxic effects to the environment for marine life, although no empirical and experimental evidence for this is yet available. The aim of this study was to characterise for the first time, the physico-chemical modification of the marine environment and its biological effects, caused by hypersaline plumes during these membrane cleaning treatments. The case study was the Maspalomas II desalination plant, located in the south of Gran Canaria (Canary Islands, Spain). Toxicity bioassays were performed on marine species characteristic for the infralittoral soft bottoms influenced by the brine plume (Synodus synodus and Cymodocea nodosa), and revealed a high sensitivity to short-term exposure to low sodium metabisulphite concentrations. The corrective measure of incorporating a diffusion system with Venturi Eductors reduced nearly all the areas of influence, virtually eliminating the impact of the disinfectant.

  3. Methodology to analyze environmental monitoring reports of desalination plants; Metodologia para el analisis de los documentos de seguimiento ambiental de las instalaciones desaladoras de agua marina

    Energy Technology Data Exchange (ETDEWEB)

    Ruis Arriaga, S.; Orozco Conti, F.; Ubaldi Freda, G. M.; Garau Hernandez, F.; Salguero Martinez, J.; Garcia Sanchez-Colomer, M.

    2010-07-01

    In this paper we propose a methodology, based on check lists, to analyze the shape and the contents of the environmental vigilance programmes and the monitoring reports related to projects of desalination plants subjects to environmental impact assessment. The aim is to obtain useful and reproducible analysis tool for detect possible faults in the environmental monitoring reports. The application of this methodology leeds up to simplify and speed up the checking of these documents by competent authority. (Author) 6 refs.

  4. Desalination and sustainability - An appraisal and current perspective.

    Science.gov (United States)

    Gude, Veera Gnaneswar

    2016-02-01

    Desalination technologies have evolved and advanced rapidly along with increasing water demands around the world since 1950s. Many reviews have focused on the techno-economic and environmental and ecological issues of the desalination technologies and emphasized the feasibility of desalination industry as an alternative to meet the water demands in many water scarce regions. Despite these efforts, many perceptions about desalination processes hinder their applications for potential water supplies. This article has two specific aims: 1) provide an overview of the desalination trends around the world and discuss the sustainability components of desalination processes in comparison with other water supply alternatives; and 2) discuss case studies for desalination, and drivers and factors that influence sustainable desalination and other alternative water sources for desalination to increase our current understanding on the sensitive and futuristic issues of water supply and resource management options for drought facing regions. Although some of the facts and recent developments discussed here show that desalination can be affordable and potentially sustainable, contributions that meaningfully address socio-economic and ecological and environmental issues of desalination processes are urgently required in this critical era of severe water stress for the present context and the future development of desalination technologies.

  5. Precipitation softening: a pretreatment process for seawater desalination.

    Science.gov (United States)

    Ayoub, George M; Zayyat, Ramez M; Al-Hindi, Mahmoud

    2014-02-01

    Reduction of membrane fouling in reverse osmosis systems and elimination of scaling of heat transfer surfaces in thermal plants are a major challenge in the desalination of seawater. Precipitation softening has the potential of eliminating the major fouling and scaling species in seawater desalination plants, thus allowing thermal plants to operate at higher top brine temperatures and membrane plants to operate at a reduced risk of fouling, leading to lower desalinated water costs. This work evaluated the use of precipitation softening as a pretreatment step for seawater desalination. The effectiveness of the process in removing several scale-inducing materials such as calcium, magnesium, silica, and boron was investigated under variable conditions of temperature and pH. The treatment process was also applied to seawater spiked with other known fouling species such as iron and bacteria to determine the efficiency of removal. The results of this work show that precipitation softening at a pH of 11 leads to complete elimination of calcium, silica, and bacteria; to very high removal efficiencies of magnesium and iron (99.6 and 99.2 %, respectively); and to a reasonably good removal efficiency of boron (61 %).

  6. Seawater desalination as an option to alleviate water scarcity in South Africa: the need for a strategic approach to planning and environmental decision-making

    CSIR Research Space (South Africa)

    Schreiner, GO

    2014-04-01

    Full Text Available planning should be introduced to present the opportunities and constraints of the desalination option within the national water and energy policy. In absence of this, piece-meal decisions will be made at local authority levels and the construction of SWRO...

  7. Forward Osmosis in India: Status and Comparison with Other Desalination Technologies.

    Science.gov (United States)

    Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

    2014-01-01

    With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well.

  8. Renewable energy-driven desalination technologies: A comprehensive review on challenges and potential applications of integrated systems

    KAUST Repository

    Ghaffour, Noreddine

    2015-01-01

    Despite the tremendous improvements in conventional desalination technologies, its wide use is still limited due primarily to high energy requirements which are currently met with expensive fossil fuels. The use of alternative energy sources is essential to meet the growing demand for water desalination. In the last few decades a lot of effort has being directed in the use of different renewable energy (RE) sources to run desalination processes. However, the expansion of these efforts towards larger scale plants is hampered by several techno-economic challenges. Several medium-scale RE-driven desalination plants have been installed worldwide. Nevertheless, most of these plants are connected to the electrical grid to assure a continuous energy supply for stable operation. Furthermore, RE is mostly used to produce electric power which can be used to run desalination systems. This review paper focuses on an integrated approach in using RE-driven with an emphasis on solar and geothermal desalination technologies. Innovative and sustainable desalination processes which are suitable for integrated RE systems are presented. An assessment of the benefits of these technologies and their limitations are also discussed.

  9. CONTAMINATION POTENTIAL OF SPECIFIC IONS IN SOIL TREATED WITH REJECT BRINE FROM DESALINATION PLANTS

    Directory of Open Access Journals (Sweden)

    ANDLER MILTON PAIVA DE OLIVEIRA

    2016-01-01

    Full Text Available Percolation columns constructed in the Laboratory can predict the degree of contamination in soil due to reject brine disposal and can be a tool for reducing environmental impacts. This study aim to evaluate the mobilization of ions in reject brine from desalination process by reverse osmosis. The mobilization of the contaminant ions in the saline waste was studied in glass percolation columns, which were filled with soil of contrasting textures (eutrophic CAMBISOL, typic dystrophic Red OXISOL, ENTISOL Quartzipsamment. Experiments ware repeated three times each, and the initial and final concentrations of the ion contaminants were analyzed. The pollution potential of this wastewater was determined by the retardation factor and dispersion-diffusion coefficient of K+, Cl- and Na+ for each studied soil. The differences in the displacement curves of the ions present in the saline waste among various soil types were analyzed. The Entisol Quartzipsamment showed a higher forward speed of the ions K+ and Cl- (greater retardation factor, i.e., greater power of the subsurface contamination for these ions. In typic dystrophic Red OXISOL, the ions move with greater ease and therefore produced greater groundwater contamination. In eutrophic CAMBISOL, the low coefficient of diffusion-dispersion in all ions was evaluated (i.e., reduced ion mobility is directly influenced by their exchangeable levels.

  10. Assessment of wind energy to power solar brackish water greenhouse desalination units. A case study from Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudi, Hacene [Laboratory of Water and Environment, Hassiba Ben Bouali University, Chlef, P.O. Box 151 (Algeria); Faculty of Sciences and Engineering Sciences, Hassiba Ben Bouali University, Chlef (Algeria); Spahis, Nawel [Faculty of Sciences and Engineering Sciences, Hassiba Ben Bouali University, Chlef (Algeria); Goosen, Mattheus F. [Alfaisal University, P.O. Box 50927, Riyadh 11533, KSA (Saudi Arabia); Sablani, Shyam [Biological Systems Engineering, Washington State University, Pullman, WA (United States); Abdul-wahab, Sabah A. [College of Engineering, P.O. Box 33, Sultan Qaboos University, Al-Khod 123, Muscat (Oman); Ghaffour, Noreddine [Middle East Desalination Research Center, P.O. Box 21, P.C. 133, Muscat (Oman); Drouiche, Nadjib [Silicon Technology Development Unit (UDTS), 2 Bd Frantz Fanon BP399 Algiers (Algeria)

    2009-10-15

    The Algerian desert dominates large parts of the country's vast territory, and Algeria is among the countries filling most of the world's largest desert. In fact the country is over 80% desert. Even though more than 80% of the population is located in the northern Mediterranean coastal zone, most of oil and gas fields are located in the country's vast southern desert called Sahara. Furthermore, the desert region is developed into a major tourist destination. This arid zone region is characterized by a lack of potable water. However, in addition to the abundant solar energy, the region is also endowed with important wind and brackish groundwater resources with different qualities. Therefore, a brackish water greenhouse desalination unit that is powered by wind energy is a good solution for desalting groundwater for irrigation purposes in this region. Brackish water can be used to cool the greenhouse, creating the proper climate to grow valuable crops. Moreover, at the same time the fresh water that is produced in this system may be sufficient for the irrigation of crops grown inside the unit. In this study, five typical regions in the Sahara were selected and investigated. These regions were selected since they were areas of traditional agriculture. The frequency distributions of wind speed data were collected from Surface Meteorology and Solar Energy (SSE) statistics developed by NASA and evaluated for a 10-year period. The distributions were used to determine the average wind speed and the available wind power for the five locations. The results indicated that the available wind energy is a suitable resource for power production and can be used to provide the required electricity for the brackish groundwater greenhouse desalination units. (author)

  11. Determination of rational design parameters of a multi-stage solar water desalination still using transient mathematical modelling

    Energy Technology Data Exchange (ETDEWEB)

    Shatat, M.I.M.; Mahkamov, K. [School of Engineering, Durham University, South Road, Durham, DH1 3LE (United Kingdom)

    2010-01-15

    The paper describes the experimental investigations of the performance of a multi-stage water desalination still connected to a heat pipe evacuated tube solar collector with aperture area of 1.7 m{sup 2}. The multi-stage solar still water desalination system was designed to recover latent heat from evaporation and condensation processes in four stages. The variation in the solar radiation during a typical mid-summer day in the Middle East region was simulated on the test rig using an array of 110 halogen floodlights covering the area of the collector. The results of tests demonstrate that the system produces about 9 kg of fresh water per day and has a solar collector efficiency of about 68%. However, the overall efficiency of the laboratory test rig at this stage of the investigations was found to be at the level of 33% due to excessive heat losses in the system. The analysis of the distilled water showed that its quality was within the World Health Organization guidelines. The still's operation was numerically simulated by employing a mathematical model based on a system of ordinary energy and mass conservation differential equations written for each stage of the still. A computer program was developed for transient simulations of the evaporation and condensation processes inside the multi-stage still. Experimental results obtained and theoretical predictions were found to be in good agreement. The results on the determination of rational design dimensions and number of stages of the still for a given aperture of the solar collector are also presented in this work. (author)

  12. Application of geothermal energy for heating and fresh water production in a brackish water greenhouse desalination unit. A case study from Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudi, Hacene [Laboratory of Water and Environment, Hassiba Ben Bouali University, Chlef, P.O. Box 151 (Algeria); Faculty of Sciences and Engineering Sciences, Hassiba Ben Bouali University, Chlef (Algeria); Spahis, Nawel [Faculty of Sciences and Engineering Sciences, Hassiba Ben Bouali University, Chlef (Algeria); Goosen, Mattheus F. [Office of Research and Graduate Studies, Alfaisal University, Riyadh (Saudi Arabia); Ghaffour, Noreddine [Middle East Desalination Research Center, P.O. Box 21, P.C. 133, Muscat (Oman); Drouiche, Nadjib [Silicon Technology Development Unit (UDTS), 2 Bd Frantz Fanon BP399, Algiers (Algeria); Ouagued, Abdellah [Laboratory of Water and Environment, Hassiba Ben Bouali University, Chlef, P.O. Box 151 (Algeria)

    2010-01-15

    The aim of this paper was to outline a proposed a new brackish water greenhouse desalination unit powered by geothermal energy for the development of arid and relatively cold regions, using Algeria as a case study. Countries which have abundant sea/brackish water resources and good geothermal conditions are ideal candidates for producing fresh water from sea/brackish water. The establishment of human habitats in these arid areas strongly depends on availability of fresh water. The main advantage of using geothermal energy to power brackish water greenhouse desalination units is that this renewable energy source can provide power 24 h a day. This resource is generally invariant with less intermittence problems compared to other renewable resources such as solar or wind energy. Geothermal resources can both be used to heat the greenhouses and to provide fresh water needed for irrigation of the crops cultivated inside the greenhouses. A review of the geothermal potential in the case study country is also outlined. (author)

  13. Thermal desalination in GCC and possible development

    KAUST Repository

    Darwish, Mohamed Ali

    2013-06-28

    The Water Desalination and Reuse Center in King Abdulla University of Science and Technology, in Saudi Arabia, held a workshop on thermal desalination on the 11th and 12th of March, 2013. This paper was presented as part of a lecture at the workshop. It presents the status and possible developments of the two main thermal desalination systems processing large quantities of seawater in the Gulf Cooperation Council, multi-stage flash, and thermal vapor compression systems. Developments of these systems were presented to show how these systems are competing with the more energy-efficient seawater reverse osmosis desalting. © 2013 © 2013 Balaban Desalination Publications. All rights reserved.

  14. Comparison of Configurations for High-Recovery Inland Desalination Systems

    Directory of Open Access Journals (Sweden)

    Philip A. Davies

    2012-09-01

    Full Text Available Desalination of brackish groundwater (BW is an effective approach to augment water supply, especially for inland regions that are far from seawater resources. Brackish water reverse osmosis (BWRO desalination is still subject to intensive energy consumption compared to the theoretical minimum energy demand. Here, we review some of the BWRO plants with various system arrangements. We look at how to minimize energy demands, as these contribute considerably to the cost of desalinated water. Different configurations of BWRO system have been compared from the view point of normalized specific energy consumption (SEC. Analysis is made at theoretical limits. The SEC reduction of BWRO can be achieved by (i increasing number of stages, (ii using an energy recovery device (ERD, or (iii operating the BWRO in batch mode or closed circuit mode. Application of more stages not only reduces SEC but also improves water recovery. However, this improvement is less pronounced when the number of stages exceeds four. Alternatively and more favourably, the BWRO system can be operated in Closed Circuit Desalination (CCD mode and gives a comparative SEC to that of the 3-stage system with a recovery ratio of 80%. A further reduction of about 30% in SEC can be achieved through batch-RO operation. Moreover, the costly ERDs and booster pumps are avoided with both CCD and batch-RO, thus furthering the effectiveness of lowering the costs of these innovative approaches.

  15. Evaluating the efficiency of different microfiltration and ultrafiltration membranes used as pretreatment for Red Sea water reverse osmosis desalination

    KAUST Repository

    Almashharawi, Samir

    2013-01-01

    Conventional processes are widely used as pretreatment for reverse osmosis (RO) desalination technology since its development. However, these processes require a large footprint and have some limitation issues such as difficulty to maintain a consistent silt density index, coagulation control at low total suspended solids, and management of higher waste sludge. Recently, there has been a rapid growth in the use of low-pressure membranes as pretreatment for RO systems replacing the conventional processes. However, despite the numerous advantages of using this integrated membrane system mainly providing good and stable water quality to RO membranes, many issues have to be addressed. The primary limitation is membrane fouling which reduces the permeate flux; therefore, higher pumping intensity is required to maintain a consistent volume of product. This paper aims to optimize the permeation flux and cleaning frequency by providing high permeate quality. Different low-pressure polyethersulfone membranes with different pore sizes ranging from 0.1 lm to 50 kDa were tested. Eight different filtration configurations have been applied including the variation of coagulant doses aiming to control membrane fouling. Results showed that all the configurations with/without coagulation, provided permeate with excellent water quality which improves the stability of RO performance. However, more stable fluxes with less-energy consumption were achieved by using the 0.1 lm and 100 kDa membranes with 1 mg/L FeCl3 coagulation. The use of UF membranes, having tight pores, without coagulation also proved to be an excellent option for Red Sea water RO pretreatment. © 2013 Desalination Publications.

  16. Aquifer composition and the tendency toward scale-deposit formation during reverse osmosis desalination - Examples from saline ground water in New Mexico, USA

    Science.gov (United States)

    Huff, G.F.

    2006-01-01

    Desalination is expected to make a substantial contribution to water supply in the United States by 2020. Currently, reverse osmosis is one of the most cost effective and widely used desalination technologies. The tendency to form scale deposits during reverse osmosis is an important factor in determining the suitability of input waters for use in desalination. The tendency toward scale formation of samples of saline ground water from selected geologic units in New Mexico was assessed using simulated evaporation. All saline water samples showed a strong tendency to form CaCO3 scale deposits. Saline ground water samples from the Yeso Formation and the San Andres Limestone showed relatively stronger tendencies to form CaSO4 2H2O scale deposits and relatively weaker tendencies to form SiO2(a) scale deposits than saline ground water samples from the Rio Grande alluvium. Tendencies toward scale formation in saline ground water samples from the Dockum Group were highly variable. The tendencies toward scale formation of saline waters from the Yeso Formation, San Andres Limestone, and Rio Grande alluvium appear to correlate with the mineralogical composition of the geologic units, suggesting that scale-forming tendencies are governed by aquifer composition and water-rock interaction. ?? 2006 Elsevier B.V. All rights reserved.

  17. INNOVATIVE FRESH WATER PRODUCTION PROCESS FOR FOSSIL FUEL PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    James F. Klausner; Renwei Mei; Yi Li; Jessica Knight

    2004-09-01

    An innovative Diffusion Driven Desalination (DDD) process was recently described where evaporation of mineralized water is driven by diffusion within a packed bed. The energy source to drive the process is derived from low pressure condensing steam within the main condenser of a steam power generating plant. Since waste heat is used to drive the process, the main cost of fresh water production is attributed to the energy cost of pumping air and water through the packed bed. This report describes the annual progress made in the development and analysis of a Diffusion Driven Desalination (DDD) system. A combined thermodynamic and dynamic analysis demonstrates that the DDD process can yield a fresh water production of 1.03 million gallon/day by utilizing waste heat from a 100 MW steam power plant based on a condensing steam pressure of only 3'' Hg. Throughout the past year, the main focus of the desalination process has been on the diffusion tower and direct contact condenser. Detailed heat and mass transfer analyses required to size and analyze these heat and mass transfer devices are described. An experimental DDD facility has been fabricated, and temperature and humidity data have been collected over a range of flow and thermal conditions. The analyses agree quite well with the current data and the information available in the literature. Direct contact condensers with and without packing have been investigated. It has been experimentally observed that the fresh water production rate is significantly enhanced when packing is added to the direct contact condensers.

  18. Utilization of desalinated b rackish water resi dues for cultivation of the m a rine fish species, Dicentrarchus labra x, Sparus aurata, and Sciaenops ocellatus

    OpenAIRE

    Mutaz A. Al-Qutob; Ra'fat A. Qubaja; Tharwat S. Nashashibi

    2013-01-01

    The utilization of brackish water residues from desalination units for fish mariculture inPalestine could represent an environmental friendly alternative of disposing brine water which could havean adverse effect on wild life. In this study, three juvenile marine fish species (Gilt-head bream S. aurata, European sea bass D. labrax, and red drum S. ocellatus) with average weights of 0.7-4.9 g, wereacclimated and reared in brine brackish water residues collected from Jericho desalination units ...

  19. NMR, Water and Plants

    NARCIS (Netherlands)

    As, van H.

    1982-01-01

    This Thesis describes the application of a non-destructive pulsed proton NMR method mainly to measure water transport in the xylem vessels of plant stems and in some model systems. The results are equally well applicable to liquid flow in other biological objects than plants, e.g. flow of blood and

  20. Nuclear desalination for the northwest of Mexico; Desalacion nuclear para el noroeste de Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Ortega C, R. F. [Instituto de Ingenieria, UNAM, 04510 Mexico D.F. (Mexico)

    2008-07-01

    The IMPULSA project of the Engineering Institute of UNAM, it has dedicated from the year 2005 to the study and development of new desalination technologies of seawater with renewable energies. The objective is to form a group of expert engineers and investigators in the desalination topics able to transform their scientific knowledge in engineering solutions, with a high grade of knowledge of the environment and the renewable energies. In the middle of 2007 was took the initiative in the IMPULSA project to study the nuclear desalination topic. It is evident that before the high cost of the hydrocarbons and its high environmental impact, the nuclear generation alternative of energy becomes extremely attractive, mainly for desalination projects of seawater of great size. The Northwest of Mexico is particularly attractive as the appropriate site for one nuclear desalination plant of great size given its shortage of drink water and the quick growth of its population; as well as its level of tourist, agricultural and industrial activity. In this study was revised the state of the art of the nuclear desalination on the world and it is simulated some couplings and operation forms of nuclear reactors and desalination units, from the thermodynamic and economic viewpoint with the purpose of identifying the main peculiarities of this technology. The objective of the study was to characterize several types and sizes of nuclear reactors of the last generation that could be couple to a desalination technology as multi-stage distillation, type flash distillation or inverse osmosis. It is used for this effect the DEEP 3.1 program of the IAEA to simulate the coupling and to carry out an economic preliminary evaluation. Was found cost very competitive of 0.038-0.044 US$/kWh for the electric power production and 0.60 to 0.77 US$/m{sup 3} for the drink water produced, without including the water transport cost or the use of carbon certificates. (Author)

  1. Water Quality Analysis of Reverse Osmosis Desalination Brine%反渗透海水淡化后浓海水的水质特点研究

    Institute of Scientific and Technical Information of China (English)

    胡海燕; 周琳

    2012-01-01

      Seawater desalination develops fast as a significant method to solve the global water resource crisis. But there are rare report about the quality of concentrated sea water. In this paper,many parameters of seawater desalination water and original seawater are analyzed. the data we got may be something useful for the water environment management and scientific study.%  作为水资源的开源增量技术,海水淡化已经成为解决全球水资源危机的重要途径。通过对浓海水的水质分析,分析了海水淡化水质状况和存在的主要问题,为水源地的水环境管理和规划提供重要科学依据。

  2. Economical analysis of a solar desalination system

    DEFF Research Database (Denmark)

    Chen, Ziqian; Wang, Tie-Zhu; He, Xiao-Rong

    2012-01-01

    Based on the calculation of the single-factor impact values of the parameters of a triple stage tower-type of solar desalination unit by utilizing a single-factor analyzing method, the influences of the cost of solar heating system, the cost of hot water tank, the costs of desalination unit and y...

  3. High-flux water desalination with interfacial salt sieving effect in nanoporous carbon composite membranes

    CERN Document Server

    Chen, Wei; Zhang, Qiang; Fan, Zhongli; Huang, Kuo-Wei; Zhang, Xixiang; Lai, Zhiping; Sheng, Ping

    2016-01-01

    Nanoporous carbon composite membranes, comprising a layer of porous carbon fiber structures with an average channel width of 30-60 nm grown on a porous ceramic substrate, are found to exhibit robust desalination effect with high freshwater flux. In three different membrane processes of vacuum membrane distillation, reverse osmosis and forward osmosis, the carbon composite membrane showed 100% salt rejection with 3.5 to 20 times higher freshwater flux compared to existing polymeric membranes. Thermal accounting experiments found that at least 80% of the freshwater pass through the carbon composite membrane with no phase change. Molecular dynamics simulations revealed a unique salt rejection mechanism. When seawater is interfaced with either vapor or the surface of carbon, one to three interfacial atomic layers contain no salt ions. Below the liquid entry pressure, the salt solution is stopped at the openings to the porous channels and forms a meniscus, while the surface layer of freshwater can feed the surface...

  4. Evaporative processes for desalination of produced water; Processos evaporativos para dessalinizacao de agua produzida a fins de reuso

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Vivian T.; Dezotti, Marcia W. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Engenharia Quimica; Schuhli, Juliana B.; Gomes, Marcia T.; Pereira Junior, Oswaldo A. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    During the productive life of an oil well, it gets the moment when a big quantity of produced water comes together with the oil. It can achieve 99% in the end of its economical life. The thermal desalination of the formation water is one of the most common technologies for achieving its reuse. This way, it was constructed one 'Robert' evaporator. The tests used different sodium chloride concentrations from 2,000 mg/L to 80,000 mg/L simulating concentrations found in the produced water from PETROBRAS wells. The tests were conducted in three different vacuum pressures. It was observed, increasing the vacuum applied to the system, results in reduction of solution boiling point. The salt concentrations of the brine blowdown were influenced by the sodium chloride concentration at the feed flow, by the vacuum applied to the system and, consequently, by the solution boiling point and flow rates. The produced distillate water presented sodium chloride concentration lower than 2 mg/L, indicating that this system can produce water to reuse in irrigation. (author)

  5. Development policy on new generation of nuclear power combined with desalination in China

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The potential market for desalination industry is forecasted in China for a long term. A co-generation policy is proposed in power production and desalination. It has been predicted that the desalination would become a huge industry in China provided that the technology of desalination is improved and fresh water cost reduced to a certain level accepted by Chinese Residents.

  6. Establishment of the Underlying Rationale and Description of a Cheap Nanofiltration-Based Method for Supplementing Desalinated Water with Magnesium Ions

    Directory of Open Access Journals (Sweden)

    Liat Birnhack

    2014-05-01

    Full Text Available The importance of supplying drinking water with a balanced mineral composition, including a minimal concentration of Mg(II ions, has been recently acknowledged by many publications, as well as in official WHO guidelines. The issue is relevant to naturally occurring soft waters and lately to the rapidly increasing volume of supplied desalinated water. This paper presents an enhancement of a recently developed nanofiltration-based method for the selective separation of soluble Mg(II species from seawater. The generated rich-Mg(II brine is demonstrated to be suitable for supplementing soft waters with magnesium ions. The brine, generated using a commercial membrane (DS-5 DL, Osmonics at various operational conditions is characterized by high Mg(II concentrations (~8.5 g/L and low Cl:Mg and Na:Mg molar concentration ratios (1.6 and 0.6, respectively, at 28-bar operation. A food-grade antiscalant is dosed to the feed seawater to prevent scaling; however, since the Mg(II concentration in the brine is high, for attaining 10 mg Mg/L of desalinated water, the dilution ratio with the desalinated water is ~1:850, resulting in maximal additional concentrations of 0.024 antiscalant, 34.9 Cl(−I, 12.9 Na(I, 0.05 Sr(II and 0.003 B (all concentrations in mg/L. The overall cost of 1 kg of Mg(II separated by the presented process amounts to between $0.05 and $0.07, i.e., much cheaper than the estimated costs of alternative processes for Mg(II addition to desalinated water.

  7. Effect of temperature on seawater desalination-water quality analyses for desalinated seawater for its use as drinking and irrigation water.

    Science.gov (United States)

    Guler, Enver; Ozakdag, Deniz; Arda, Muserref; Yuksel, Mithat; Kabay, Nalan

    2010-08-01

    The effect of feed seawater temperature on the quality of product water in a reverse osmosis process was investigated using typical seawater at Urla Bay, Izmir region, Turkey. The tests were carried out at different feed seawater temperatures (11-23 degrees C) using two RO modules with one membrane element each. A number of variables, including pH, conductivity, total dissolved solids, salinity, rejection percentage of a number of ions (Na+, K+, Ca2+, Mg2+, Cl(-), HCO3(-), and SO4(2-)), and the levels of boron and turbidities in collected permeates, were measured. The suitability of these permeates as irrigation and drinking water was checked by comparison with water quality standards.

  8. Low Temperature Geothermal Resource Assessment for Membrane Distillation Desalination in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Akar, Sertac; Turchi, Craig

    2017-05-01

    Substantial drought and declines in potable groundwater in the United States over the last decade has increased the demand for fresh water. Desalination of saline water such as brackish surface or groundwater, seawater, brines co-produced from oil and gas operations, industrial wastewater, blow-down water from power plant cooling towers, and agriculture drainage water can reduce the volume of water that requires disposal while providing a source of high-quality fresh water for industrial or commercial use. Membrane distillation (MD) is a developing technology that uses low-temperature thermal energy for desalination. Geothermal heat can be an ideal thermal-energy source for MD desalination technology, with a target range of $1/m3 to $2/m3 for desalinated water depending on the cost of heat. Three different cases were analyzed to estimate levelized cost of heat (LCOH) for integration of MD desalination technology with low-grade geothermal heat: (1) residual heat from injection brine at a geothermal power plant, (2) heat from existing underutilized low-temperature wells, and (3) drilling new wells for low-temperature resources. The Central and Western United States have important low-temperature (<90 degrees C) geothermal resource potential with wide geographic distribution, but these resources are highly underutilized because they are inefficient for power production. According to the USGS, there are 1,075 identified low temperature hydrothermal systems, 55 low temperature sedimentary systems and 248 identified medium to high temperature geothermal systems in the United States. The estimated total beneficial heat potential from identified low temperature hydrothermal geothermal systems and residual beneficial heat from medium to high temperature systems is estimated as 36,300 MWth, which could theoretically produce 1.4 to 7 million m3/day of potable water, depending on desalination efficiency.

  9. Projected world market for seawater desalination equipment

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    A forecast is presented of the market for seawater desalination plants. The conclusions presented herein are based on a number of sources of information, of which the most important are: responses to questionnaires mailed to 300 cognizant water agencies in 61 countries; the published market growth trend over the period 1971 to 1983; and an analysis of the geography, rainfall, population, industrial growth, and energy availability in the respective countries. Analysis suggests the possibility that financing, although currently a major stumbling block to the purchase of desalting plants, may be effected by an exchange program in which the purchaser of plants will offer some exportable product(s) in exchange. The forecast suggests the likelihood that the seawater desalination market is becoming saturated. A plateau is expected to develop in new plant sales of additional capacity in the immediate future, followed by a downturn by the end of the century. This report, however, emphasizes the importance of the replacement market, which will involve substantial sales to replace worn-out and obsolescent equipment. The combined new-plus-replacement annual sales can be expected to reach 1.25 million m/sup 3//d (330 Mgd) by the year 2000. Seawater reverse osmosis (SWRO) is expected to represent 270,000 m/sup 3//d (70 Mgd) by the end of the century because of technological improvements in membrane systems and components.

  10. Review of Knowledge on the Occurrence, Chemical Composition, and Potential Use for Desalination of Saline Ground Water in Arizona, New Mexico, and Texas with a Discussion of Potential Future Study Needs

    Science.gov (United States)

    Huff, G.F.

    2004-01-01

    Increasing demand on the limited supplies of freshwater in the desert Southwest, as well as other parts of the United States, has increased the level of interest in saline-water resources. Saline ground water has long been recognized as a potentially important contributor to water supply in the Southwest, as demonstrated by the number of hydrologic, geologic, and engineering studies on the distribution of saline water and the feasibility of desalination. Potential future study needs include investigating and documenting the three-dimensional distribution of salinity and chemical composition of saline-water resources and the hydraulic properties of aquifers containing these saline-water resources, assessing the chemical suitability of saline water for use with existing and anticipated desalination technologies, simulating the effect of withdrawal of saline ground water on water levels and water composition in saline and adjoining or overlying freshwater aquifers, and determining the suitability of target geologic formations for injection of desalination-generated waste.

  11. Advanced organic and biological analysis of dual media filtration used as a pretreatment in a full-scale seawater desalination plant

    KAUST Repository

    Jeong, Sanghyun

    2016-02-19

    Dual media filter (DMF) is being used as a primary pretreatment to remove particulate foulants at seawater desalination plants. However, many plants experience organic and biological fouling. The first part of this paper focuses on the monitoring of organic and biological foulants using advanced analytical techniques to optimize functioning of DMF at Perth Seawater Desalination Plant (PSDP) in Western Australia. In addition, microbial community analysis in DMF filtered seawater, and on DMF media (DMF-M) and cartridge filter (CF) was conducted using terminal restriction fragment length polymorphism (T-RFLP) and 454-pyrosequencing. In the full-scale DMF system, the bacterial community structure was clustered along with the filtration time and sampling positions. For the DMF effluent samples, the bacterial community structure significantly shifted after 4 h of filtration time, which corresponded with the permeability reduction trend. The dominant bacterial communities in the DMF effluent were OTU 13 (Phaeobacter) and OTU 19 (Oceaniserpentilla). The different biofilm-forming bacteria communities were found in the biofilm samples on DMF-M and CF. In the second part of the study, semi-pilot scale DMF columns were operated on-site under same operating conditions used in PSDP. It demonstrated the advantage of operating DMF at the biofiltration mode for improving the reduction of biofoulants. © 2016 Elsevier B.V.

  12. Photocatalytic Treatment of Desalination Concentrate Using Optical Fibers Coated With Nanostructured Thin Films: Impact of Water Chemistry and Seasonal Climate Variations.

    Science.gov (United States)

    Lin, Lu; Wang, Huiyao; Luo, Hongmei; Xu, Pei

    2016-05-01

    Treatment of desalination concentrate can reduce concentrate volume for disposal, increase water recovery and convert waste to resource. However, concentrate treatment is costly and energy intensive due to high concentrations of salt and recalcitrant organic matter in concentrate. Photocatalytic oxidation provides a novel energy neutral technology for concentrate treatment by degrading organic contaminants. Polymer-assisted hydrothermal deposition method was used to synthesize innovative pure and Fe-doped TiO2 mixed-phase nanocomposite thin films on side-glowing optical fibers (SOFs). The properties of the photocatalysts-coated SOF were characterized by surface morphology, nanostructure, crystallite size and phase and zeta potential. Photodegradation efficiency and durability of the photocatalysts treating different types of desalination concentrate was studied under natural sunlight. Synthetic solutions and reverse osmosis (RO) concentrates from brackish water and municipal wastewater desalination facilities were tested to elucidate the impact of water chemistry, operating conditions and seasonal climate variations (solar irradiation intensity and temperature) on photocatalytic efficiency. High ionic strength and divalent electrolyte ions in RO concentrate accelerated photocatalytic process, whereas the presence of carbonate species and organic matter hindered photodegradation. Outdoor testing of immobilized continuous-flow photoreactors suggested that the catalyst-coated SOFs can utilize a wide spectrum of natural sunlight and achieved durable photocatalytic performance. © 2016 The American Society of Photobiology.

  13. 低温多效蒸馏法海水淡化技术的应用%Application of low temperature multi-effective distilment seawater desalination technology

    Institute of Scientific and Technical Information of China (English)

    孙育文; 周军

    2009-01-01

    The sea water desalination technology includes the distillation method and the reverse osmosis method. The application of low temperature multi-effective distillation technology in Tianjin Beijiang Power Plant was introduced. The features of sea water desalination technology were analyzed. The operation and control mode of sea water desalination system were discoursed. The performance parameters and guaranteed value of the sea water desalinating equipment were given.%海水淡化技术包括蒸馏法和反渗透法.介绍了低温多效蒸馏技术在天津北疆发电厂海水淡化中的应用情况,分析了海水淡化技术的特点,论述了海水淡化系统的运行及控制方式,提供了海水淡化装置的性能参数和保证值.

  14. Preliminary design of seawater and brackish water reverse osmosis desalination systems driven by low-temperature solar organic Rankine cycles (ORC)

    Energy Technology Data Exchange (ETDEWEB)

    Delgado-Torres, Agustin M. [Dpto. Fisica Fundamental y Experimental, Electronica y Sistemas, Escuela Tecnica Superior de Ingenieria Civil e Industrial, Universidad de La Laguna (ULL), Avda. Astrofisico Francisco Sanchez s/n. 38206 La Laguna (Tenerife) (Spain); Garcia-Rodriguez, Lourdes [Dpto. Ingenieria Energetica, Universidad de Sevilla Escuela Tecnica Superior de Ingenieros, Camino de los Descubrimientos, s/n 41092 Sevilla (Spain)

    2010-12-15

    In this paper, the coupling between the low-temperature solar organic Rankine cycle (ORC) and seawater and brackish water reverse osmosis desalination units has been carried out. Four substances have been considered as working fluids of the solar cycle (butane, isopentane, R245fa and R245ca). With these four fluids the volumetric flow of fresh water produced per unit of aperture area of stationary solar collector has been calculated. The former has been made with the optimized direct vapour generation (DVG) configuration and heat transfer fluid (HTF) configuration of the solar ORC. In the first one (DVG), working fluid of the ORC is directly heated inside the absorber of the solar collector. In the second one (HTF), a fluid different than the working fluid of the ORC (water in this paper) is heated without phase change inside the absorber of the solar collector. Once this fluid has been heated it is carried towards a heat exchanger where it is cooled. Thermal energy delivered in this cooling process is transferred to the working fluid of the ORC. Influence of condensation temperature of the ORC and regeneration's process effectiveness over productivity of the system has also been analysed. Finally, parameters of several preliminary designs of the low-temperature solar thermal driven RO desalination are supplied. R245fa is chosen as working fluid of the ORC in these preliminary designs. The information of the proposed preliminary designs can also be used, i.e., for the assessment of the use of thermal energy rejected by the solar cycle. Overall analysis of the efficiency of the solar thermal driven RO desalination technology is given with the results presented in this paper and the results obtained with the medium temperature solar thermal RO desalination system presented by the authors in previous papers. This work has been carried out within the framework of the OSMOSOL and POWERSOL projects. (author)

  15. 淡化水作为城市供水时的水质问题与对策%WATER QUALITY ISSUES AND COUNTERMEASURES IN MUNICIPAL WATER SUPPLY SYSTEM USING DESALINATED WATER

    Institute of Scientific and Technical Information of China (English)

    赵明; 沈娜; 何文杰

    2011-01-01

    随着海水淡化技术日益成熟,工程规模也越来越大,淡化水在解决淡水资源短缺的今天发挥着巨大作用,淡化水将大规模地应用到市政给水.从淡化水的安全性和对管网的影响,阐述了淡化水的特殊性,并根据其特点提出了达到常饮水标准,提高水质化学稳定性,减轻对管道的腐蚀,稳定水力条件,减轻“黄水”现象出现的工程措施.%The desalinated water is playing much more important role in solving the shortage of freshwater resources all around the world, especially with the seawater desalination technology becoming more and more mature and the project scales increasing much larger, the desalinated water will be extensively applied to municipal water supply system. In this article,the characteristics of the desalinated water will be illustrated from two aspects: the health and safety as one kind of drinking water as well as the effects on the distribution system. According to such water's characteristics, some counter-measures were proposed to improve water chemical stability, to mitigate corrosion of pipelines, to keep stable hydraulic conditions of distribution system , and to avoid the pH enomena of "yellow"water.

  16. Potential of Concentrating Solar Power Plants for the Combined Production of Water and Electricity in MENA Countries

    Directory of Open Access Journals (Sweden)

    Massimo Moser

    2013-06-01

    Full Text Available The widening gap between consumption and availability of water poses a serious threat to a sustainable socioeconomic development of the Middle East and North Africa (MENA countries and calls for an even larger augmentation of water supply using seawater desalination. However, these plants are affected by high specific energy consumption, while the uncertainty about fossil fuel prices in the future represents a severe problem. Within this study long-term scenarios for water and electricity demand based on potential assessment of renewable energies have been developed. The results provide baseline information for decision makers for the establishment of a favourable framework for the deployment of concentrated solar power and desalination plants. Finally, this paper points out the importance to start a paradigm change in water and electricity supply as soon as possible, in order to meet the requirements for low cost water and electricity and to avoid conflicts related to water scarcity.

  17. Innovative Fresh Water Production Process for Fossil Fuel Plants

    Energy Technology Data Exchange (ETDEWEB)

    James F. Klausner; Renwei Mei; Yi Li; Jessica Knight; Venugopal Jogi

    2005-09-01

    This project concerns a diffusion driven desalination (DDD) process where warm water is evaporated into a low humidity air stream, and the vapor is condensed out to produce distilled water. Although the process has a low fresh water to feed water conversion efficiency, it has been demonstrated that this process can potentially produce low cost distilled water when driven by low grade waste heat. This report describes the annual progress made in the development and analysis of a Diffusion Driven Desalination (DDD) system. A dynamic analysis of heat and mass transfer demonstrates that the DDD process can yield a fresh water production of 1.03 million gallon/day by utilizing waste heat from a 100 MW steam power plant based on a condensing steam pressure of only 3 Hg. The optimum operating condition for the DDD process with a high temperature of 50 C and sink temperature of 25 C has an air mass flux of 1.5 kg/m{sup 2}-s, air to feed water mass flow ratio of 1 in the diffusion tower, and a fresh water to air mass flow ratio of 2 in the condenser. Operating at these conditions yields a fresh water production efficiency (m{sub fW}/m{sub L}) of 0.031 and electric energy consumption rate of 0.0023 kW-hr/kg{sub fW}. Throughout the past year, the main focus of the desalination process has been on the direct contact condenser. Detailed heat and mass transfer analyses required to size and analyze these heat and mass transfer devices are described. The analyses agree quite well with the current data. Recently, it has been recognized that the fresh water production efficiency can be significantly enhanced with air heating. This type of configuration is well suited for power plants utilizing air-cooled condensers. The experimental DDD facility has been modified with an air heating section, and temperature and humidity data have been collected over a range of flow and thermal conditions. It has been experimentally observed that the fresh water production rate is enhanced when air

  18. Thermodynamic simulation of solar/gas hybrid system os water sea desalination; Simulacion termodinamica de un sistema hibrido solar/gas de desalacion de agua de mar

    Energy Technology Data Exchange (ETDEWEB)

    Alarcon, D.; Blanco, J.; Sanchez, B.; Malato, S.; Maldonado, M. I.; Fernandez, P.

    2004-07-01

    Desalination of seawater is one of the most promising applications of solar thermal energy and one of the possible solutions to the water stress the planet is now undergoing. This paper shows the different solar desalination system configurations that have been studied during the research phase of AQUASOL European Project (EVK1-CT2001-00102). These configurations have been modeled and the analysis of the corresponding simulations has allowed determining the approximate temperatures and flow rates obtained in the various subsystems. The choice of the best configuration can only be made after the system has been installed at the Plataforma Solar de Almeria and its experimental evaluation in the demonstration phase of the project. (Author)

  19. JOINT ECONOMIC AND ENVIRONMENTAL OPTIMIZATION OF HYBRID POWER SUPPLY FOR LARGE SCALE RO-DESALINATION PLANT: WITH AND WITHOUT CO2 SEQUESTRATION

    Directory of Open Access Journals (Sweden)

    EMAN A. TORA

    2016-07-01

    Full Text Available In this paper, a multi- objective optimization approach is introduced to define a hybrid power supply system for a large scale RO- desalination plant. The target is to integrate a number of locally available energy resources to generate the electricity demand of the RO- desalination plant with minimizing both the electricity generation cost and the greenhouse gas emissions whereby carbon dioxide sequestration may be an option. The considered energy resources and technologies are wind turbines, solar PV, combined cycles with natural gas turbines, combined cycles with coal gasification, pulverized coal with flue gas desulfurization, and biomass combined heat and power CHP. These variable energy resources are investigated under different constraints on the renewable energy contribution. Likewise, the effect of carbon dioxide sequestration is included. Accordingly, five scenarios have been analyzed. Trade- offs between the minimum electricity generation cost and the minimum greenhouse gas emissions have been determined and represented in Pareto curves using the constraint method (. The results highlight that among the studied fossil fuel technologies, the integrated combined cycle natural gas turbines can provide considerable fraction of the needed power supply. Likewise, wind turbines are the most effective technology among renewable energy options. When CO2 sequestration applied, the costs increase and significant changes in the optimum combination of renewable energy resources have been monitored. In that case, solar PV starts to appreciably compete. The optimum mix of energy resources extends to include biomass CHP as well.

  20. Application of a multi-criteria analysis for the selection of the most suitable energy source and water desalination system in Mauritania

    Energy Technology Data Exchange (ETDEWEB)

    Bayod Rujula, Angel Antonio [Department of Electrical Engineering, Polytechnic Centre Superior, University of Zaragoza (Spain); Dia, Nourou Khalidou [Centre of Research for Energy Resources and Consumption, University of Zaragoza, C/Maria de Luna 3, 50015 Zaragoza (Spain)

    2010-01-15

    Water deficits and their associated shortages are serious problems in many areas of the world. The paper presents a multi-criteria analysis for selection of the most suitable system in Mauritania. Six scenarios, different energy sources, technologies of water desalination processes and water use and five criteria are analyzed. The multi-criteria analysis shows that the optimal solution is different for each scenario; in some cases the photovoltaic-reverse osmosis option is preferable; in others, the best option is reverse-osmosis powered by wind energy or concentrating solar parabolic. (author)

  1. Economical analysis and study on a solar desalination unit

    OpenAIRE

    Chen, Ziqian; He, Xiaorong; Wang, Tiezhu; Chen, Zhunling; Zheng, Hongfei

    2010-01-01

    Based on the calculation of the single-factor impact values of the parameters of a triple tower-type solar desalination unit on the cost of fresh water production by utilizing a single-factor analyzing method, the influences of the cost of solar heating system, the cost of hot water tank, the costs of desalination unit and electrical power, the life time of solar desalination unit and the yearly yield of fresh water, on the cost of the fresh water production of the solar desalination unit are...

  2. Determination of the costs of the nuclear desalination using the DEEP code from IAEA; Determinacion de los costos de la desalacion nuclear utilizando el codigo DEEP del OIEA

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez S, J.R.; Palacios H, J.C.; Alonso V, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jrrs@nuclear.inin.mx

    2005-07-01

    The desalination of seawater is being an important solution to satisfy the demands of drinking water to population's centers that have hydric resources very limited, like it is the case of some Arab countries and arid regions of the planet, in where they have settled desalination plants that use as energy source to those fossil fuels or nuclear energy plants. Taking into account that the desalination of seawater is a process that consumes a lot of thermal and/or electric energy, it is necessary to quantify the costs of the supply and that of the desalination plant for different options and technologies, looking for this way the but appropriate for the specific conditions of the region where it has planned the desalination of seawater. In this report the three technologies but promising for the desalination are described and by means of the DEEP code the costs of production of water and energy are evaluated, using as thermal source different types of power nuclear reactors. It was obtained according to DEEP that the costs of the electricity generation for the considered reactors are around 40 USD/MWh. With these costs of electric power generation and using the DEEP code is obtained that the costs of production of drinking water are around 1 USD/m{sup 3}. (Author)

  3. Energy portfolio of Iran: A case study of solar desalination

    Science.gov (United States)

    Besharati, Adib

    Energy plays a very important role in the economic development of a country such as Iran where industrial progress and higher living standards increase demand for energy. Iran is one of the countries in the world that simultaneously produces and consumes large amounts of energy. Because of its geographic latitude and weather conditions, Iran has the potential to develop and use of both fossil and renewable energy sources. In South Iran, there are huge oil and gas resources, and at the same time high potential of solar radiation. However, at the present large-scale utilization, solar energy is prohibitively expensive for Iran. Therefore, this study investigates an economical way to utilize solar energy in a meaningful way for Iran. One of the possible uses of solar energy that is both economical and technically feasible is desalination of water using solar energy. People in South Iran live in different areas with relatively low population density. One of the critical problems in those areas is a lack of clean drinking water. As a result, there is an urgent need to investigate ways to produce clean water from the saltwater. Therefore, the present study conducts a case study of solar desalination in south Iran using solar. Different desalination methods, such as humidification dehumidification by using a solar collector, and reverse osmosis, are discussed. In the case study, a prototype desalination plant was considered and both technical and economic aspects of the plant were investigated in details. The results showed higher productivity of drinking water in reverse osmosis method for south Iran.

  4. Energy system impacts of desalination in Jordan

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg; Lund, Henrik; Mathiesen, Brian Vad

    2014-01-01

    others population and wealth increase and competitive water uses from agriculture and industry is causing many nations to turn to desalination technologies. This article investigates a Jordanian energy scenario with two different desalination technologies; reverse osmosis (RO) driven by electricity...... and Multi Stage Flash (MSF) desalination driven by Cogeneration of Heat and Power (CHP). The two systems impact the energy systems in different ways due to the technologies’ particular characteristics. The systems are analyses in the energy systems analysis model EnergyPLAN to determine the impacts...

  5. Membrane Operations for Process Intensification in Desalination

    Directory of Open Access Journals (Sweden)

    Enrico Drioli

    2017-01-01

    Full Text Available Process intensification strategy (PIS is emerging as an interesting guideline to revolutionize process industry in terms of improved efficiency and sustainability. Membrane engineering has appeared as a strong candidate to implement PIS. The most significant progress has been observed in desalination where substantial reduction in overall energy demand, environmental footprint, and process hazards has already been accomplished. Recent developments in membrane engineering are shaping the desalination industry into raw materials and energy production where fresh water will be produced as a byproduct. The present study discusses the current and perspective role of membrane engineering in achieving the objectives of PIS in the field of desalination.

  6. Wireless desalination using inductively powered porous carbon electrodes

    NARCIS (Netherlands)

    Kuipers, J.; Porada, S.

    2013-01-01

    Water desalination by capacitive deionization (CDI) uses electrochemical cell pairs formed of porous carbon electrodes, which are brought in contact with the water that must be desalinated. Upon applying a cell voltage or current between the electrodes, ions are electrosorbed and water is produced

  7. Wireless desalination using inductively powered porous carbon electrodes

    NARCIS (Netherlands)

    Kuipers, J.; Porada, S.

    2013-01-01

    Water desalination by capacitive deionization (CDI) uses electrochemical cell pairs formed of porous carbon electrodes, which are brought in contact with the water that must be desalinated. Upon applying a cell voltage or current between the electrodes, ions are electrosorbed and water is produced o

  8. Strategic Co-Location in a Hybrid Process Involving Desalination and Pressure Retarded Osmosis (PRO

    Directory of Open Access Journals (Sweden)

    William B. Krantz

    2013-07-01

    Full Text Available This paper focuses on a Hybrid Process that uses feed salinity dilution and osmotic power recovery from Pressure Retarded Osmosis (PRO to achieve higher overall water recovery. This reduces the energy consumption and capital costs of conventional seawater desalination and water reuse processes. The Hybrid Process increases the amount of water recovered from the current 66.7% for conventional seawater desalination and water reuse processes to a potential 80% through the use of reclaimed water brine as an impaired water source. A reduction of up to 23% in energy consumption is projected via the Hybrid Process. The attractiveness is amplified by potential capital cost savings ranging from 8.7%–20% compared to conventional designs of seawater desalination plants. A decision matrix in the form of a customizable scorecard is introduced for evaluating a Hybrid Process based on the importance of land space, capital costs, energy consumption and membrane fouling. This study provides a new perspective, looking at processes not as individual systems but as a whole utilizing strategic co-location to unlock the synergies available in the water-energy nexus for more sustainable desalination.

  9. Strategic Co-Location in a Hybrid Process Involving Desalination and Pressure Retarded Osmosis (PRO).

    Science.gov (United States)

    Sim, Victor S T; She, Qianhong; Chong, Tzyy Haur; Tang, Chuyang Y; Fane, Anthony G; Krantz, William B

    2013-07-04

    This paper focuses on a Hybrid Process that uses feed salinity dilution and osmotic power recovery from Pressure Retarded Osmosis (PRO) to achieve higher overall water recovery. This reduces the energy consumption and capital costs of conventional seawater desalination and water reuse processes. The Hybrid Process increases the amount of water recovered from the current 66.7% for conventional seawater desalination and water reuse processes to a potential 80% through the use of reclaimed water brine as an impaired water source. A reduction of up to 23% in energy consumption is projected via the Hybrid Process. The attractiveness is amplified by potential capital cost savings ranging from 8.7%-20% compared to conventional designs of seawater desalination plants. A decision matrix in the form of a customizable scorecard is introduced for evaluating a Hybrid Process based on the importance of land space, capital costs, energy consumption and membrane fouling. This study provides a new perspective, looking at processes not as individual systems but as a whole utilizing strategic co-location to unlock the synergies available in the water-energy nexus for more sustainable desalination.

  10. WATER IN THE KINGDOM OF SAUDI ARABIA: SUSTAINABLE MANAGEMENT OPTIONS

    OpenAIRE

    KKhodran H. Al-Zahrani and M. B. Baig

    2011-01-01

    Water is one of the most precious and valuable resources affecting the Saudi development plans. The acute shortage of fresh water resources poses a major challenge in Saudi Arabia. Demand for fresh water is on the rise as sufficient water is no longer available to meet daily needs. Some 95% of water comes from aquifers. Desalination plants and waste water reclamation projects provide about 4% and 1% water respectively. About 30% of the water for household consumption comes from desalinating p...

  11. Chemical Stability and Control Methods of Desalinated Water in a Pipe Network%管网内淡化水的化学稳定性及控制方法研究

    Institute of Scientific and Technical Information of China (English)

    姜松; 李冬; 袁朋飞; 周川; 王曼; 张杰

    2012-01-01

    为研究海水反渗透淡化水在管网中的化学稳定性及控制方法,实现减缓管网腐蚀和改善管网水质的目的,分别建立由PE、塑钢和旧铸铁管组成的3套管网,并模拟淡化水在管网中的输配.研究了淡化水在3套管网中的水质变化规律,并考察了投加CaCO3、将淡化水和水库水混合等措施提高淡化水在管网中化学稳定性的效果.综合化学稳定性判别指数LSI(-3.8~-2.2)、RSI( 12.3~ 14.1)、CCPP(-12.5~-10.5 mg/L)可知,反渗透淡化水具有极严重的腐蚀性;PE管网在减缓管网腐蚀和改善管网水质方面优于塑钢管网;投加CaCO3、将淡化水和水库水混合等措施能显著改善淡化水水质.%To study chemical stability and control methods of desalinated water in a pipe network, three sets of pipe networks consisting of PE pipe, plastic-steel pipe and old cast iron pipe were established to simulate the distribution of desalinated water in the pipe network. The objective was to slow down the pipe corrosion and improve water quality. The behavior of desalinated water in different pipe networks was analyzed, and the effect of adding CaCO3 and mixing desalinated water with reservoir water on the improvement of desalinated water stability was investigated. Taking into account of chemical stability index LSI ( - 3. 8 to -2. 2), RSI (12. 3 to 14.1) and CCPP ( - 12.5 mg/L to - 10.5 mg/L), it was found that reverse osmosis desalinated water was extremely corrosive. PE network was better than the plastic-steel network in terms of slowing down pipe corrosion and improving water quality. The quality of desalinated water could be improved by adding CaCO3 and mixing desalinated water with reservoir water.

  12. Is irrigation with partial desalinated seawater a policy option for saving freshwater in the Kingdom of Saudi Arabia

    Science.gov (United States)

    Multsch, Sebastian; Alquwaizany, Abdulaziz S.; Lehnert, Karl-H.; Frede, Hans-Georg; Breuer, Lutz

    2015-04-01

    The agriculture sector consumes with 88 % a majority of the almost fossil water resources in the Kingdom of Saudi Arabia (KSA). Irrigation with saline water has been highlighted to be a promising technique to reduce fresh water consumption. Current desalination techniques, further developments, salt tolerant crop types and improved irrigation systems can potentially redesign future perspectives for irrigation agriculture, in particular by considering the growing desalination capacity in KSA (5 million m3 day-1 in 2003). Hence, we have analyzed the potential of using desalinated and partial desalinated seawater for growing crops in KSA by considering scenarios of salinity levels and desalination costs. The desalination process has been modelled with the ROSA© software considering a reverse osmosis (RO) plant. The spatial decision support system SPARE:WATER has been applied to assess the water footprint of crops (WFcrop). In order to maintain high crop yields, salts need to be washed out from the rooting zone, which requires the application of additional salt-free water. Therefore, high crop yields come along with additional water requirements and increased desalination effort and increased costs for proving high quality water. As an example, growing wheat with partial desalinated seawater from the Arabian Gulf with a RO plant has been investigated. Desalination reduces the salinity level from 76 dS m-1 to 0.5 dS m-1 considering two RO cycles, with cost of desalinized water in the range of 0.5 to 1.2 m-3. We acknowledge that cost only refer to desalination without considering others such as transport, water pumping or crop fertilization. The study shows that Boron is the most problematic salt component, because it is difficult to remove by RO and toxic in high concentrations for crops (wheat threshold of 0.5 to 1.0 mg l-1). The nationwide average WFcrop of wheat under surface irrigation is 2,628 m3 t-1 considering high water quality of 1 dS m-1 and 3,801 m3 t-1 at

  13. Selection of inorganic-based fertilizers in forward osmosis for water desalination

    Directory of Open Access Journals (Sweden)

    Tripti Mishra

    2015-06-01

    Full Text Available The current study aims at the selection of an appropriate draw solute for forward osmosis process. Separation and recovery of the draw solute are the major criteria for the selection of draw solute for forward osmosis process. Therefore in this investigation six inorganic fertilizers draws solute were selected. The selections of inorganic fertilizers as draw solute eliminate the need of removal and recovery of draw solute from the final product. The final product water of forward osmosis process has direct application in agricultural as nutrient rich water for irrigation. These inorganic fertilizers were tested based on their water extraction (water flux capacity. This experimental water flux was compared with the observed water flux. It was noted that the observed water flux is much higher than the attained experimental water flux. The difference of these two fluxes was used to calculate the performance ratio of each selected fertilizer. Highest performance ratio was shown by low molecular weight compound ammonium nitrate (22.73 and potassium chloride (21.03 at 1 M concentration, whereas diammonium phosphate (DAP which has highest molecular weight among all the selected fertilizer show the lowest performance ratio (10.02 at 2 M concentration. DOI: http://dx.doi.org/10.3126/ije.v4i2.12660 International Journal of Environment Vol.4(2 2015: 319-329

  14. Synergies between renewable energy and fresh water production. Scoping study

    Energy Technology Data Exchange (ETDEWEB)

    Geurts, F.; Noothout, P.; Schaap, A. [Ecofys Netherlands, Utrecht (Netherlands)

    2011-02-15

    The IEA Implementing Agreement for Renewable Energy Technology Deployment (IEA-RETD) investigated the opportunities for coupling renewable energy systems with fresh water supply systems. The four main conclusions of the scoping study, carried out by Ecofys, are: (1) Fresh water production based on desalination technologies provide most options for synergies with renewable energy production; (2) Linking desalination to renewable sources is currently not economically viable; (3) There is a large potential for small scale (decentralised) desalination plants; (4) Current commercially-sized desalination technologies are in need of a constant operation point. Reverse osmosis and thermal membrane technologies might give future synergies as deferrable load.

  15. Techno-economic analysis of hybrid power system sizing applied to small desalination plants for sustainable operation

    Directory of Open Access Journals (Sweden)

    R. Nagaraj

    2016-12-01

    Full Text Available Water and energy are two inseparable commodities that govern the lives of humanity and promote civilization. Energy can be used to produce water in case of scarcity in water. Ironically most of the places that are water stressed are also energy stressed. The cost of extending grid power may be prohibitively high in those cases. Rural/remote locations like hills and islands multiply the problem to a larger magnitude. Use of renewable sources like solar, wind, biomass and other locally available energy sources is the only solution. But these renewable sources are of intermittent nature and have poor availability. Hence, it is practically difficult to produce water with a single source of energy. Naturally, combining two or more sources of energy, known as hybrid power system, is the next available option. This paper carries out a techno-economic analysis of various sizing combinations of systems with solar photo voltaic, wind energy and stored energy in batteries for production of drinking water from a brackish water source. The system can operate the RO plant whenever the power is available, produce drinking water and store in a tank. This paper analyses the model of the entire hybrid power system in MATLAB to simulate the performance of the hybrid power system for different combinations of capacities. Results of the analysis under various input conditions are analyzed.

  16. Sustainable urban water supply in south India: Desalination, efficiency improvement, or rainwater harvesting?

    Science.gov (United States)

    Srinivasan, Veena; Gorelick, Steven M.; Goulder, Lawrence

    2010-10-01

    Indian megacities face severe water supply problems owing to factors ranging from growing population to high municipal pipe leakage rates; no Indian city provides 24/7 water supply. Current approaches to addressing the problem have been "utility centric," overlooking the significance of decentralized activities by consumers, groundwater extraction via private wells, and aquifer recharge by rainwater harvesting. We propose a framework that makes it possible to evaluate a wider range of centralized and decentralized policies than previously considered. The framework was used to simulate water supply and demand in a simulation model of Chennai, India. Three very different policies, supply augmentation, efficiency improvement, and rainwater harvesting, were evaluated using the model. The model results showed that none of the three policies perfectly satisfied our criteria of efficiency, reliability, equity, financial viability, and revenue generation. Instead, a combination of rainwater harvesting and efficiency improvement best meets these criteria.

  17. Harmful algae and their potential impacts on desalination operations off southern California.

    Science.gov (United States)

    Caron, David A; Garneau, Marie-Eve; Seubert, Erica; Howard, Meredith D A; Darjany, Lindsay; Schnetzer, Astrid; Cetinić, Ivona; Filteau, Gerry; Lauri, Phil; Jones, Burton; Trussell, Shane

    2010-01-01

    Seawater desalination by reverse osmosis (RO) is a reliable method for augmenting drinking water supplies. In recent years, the number and size of these water projects have increased dramatically. As freshwater resources become limited due to global climate change, rising demand, and exhausted local water supplies, seawater desalination will play an important role in the world's future water supply, reaching far beyond its deep roots in the Middle East. Emerging contaminants have been widely discussed with respect to wastewater and freshwater sources, but also must be considered for seawater desalination facilities to ensure the long-term safety and suitability of this emerging water supply. Harmful algal blooms, frequently referred to as 'red tides' due to their vibrant colors, are a concern for desalination plants due to the high biomass of microalgae present in ocean waters during these events, and a variety of substances that some of these algae produce. These compounds range from noxious substances to powerful neurotoxins that constitute significant public health risks if they are not effectively and completely removed by the RO membranes. Algal blooms can cause significant operational issues that result in increased chemical consumption, increased membrane fouling rates, and in extreme cases, a plant to be taken off-line. Early algal bloom detection by desalination facilities is essential so that operational adjustments can be made to ensure that production capacity remains unaffected. This review identifies the toxic substances, their known producers, and our present state of knowledge regarding the causes of toxic episodes, with a special focus on the Southern California Bight. (c) 2009 Elsevier Ltd. All rights reserved.

  18. Coastal water quality near to desalination project in Cyprus using Earth observation

    Science.gov (United States)

    Papoutsa, Christiana; Hadjimitsis, Diofantos G.; Alexakis, Dimitrios D.

    2011-11-01

    Remote sensing can become a very useful tool in order to monitor coastal water quality. Economically benefits of using remote sensing techniques are obviously comparatively to the field-based monitoring because water quality can be checked daily or weekly depended on satellite overpass frequency rather than monthly as done by traditional methods which involve expensive sampling campaigns. Moreover remote sensing allows the spatial and temporal assessment of various physical, biological and ecological parameters of water bodies giving the opportunity to examine a large area by applying the suitable algorithm. This paper describes the overall methodology in order to retrieve a coastal water monitoring tool for a high risk area in Cyprus. This project is funded by the Research Promotion Foundation of Cyprus and is been developed by the Department of Civil Engineering & Geomatics, Remote Sensing Laboratory, Cyprus University of Technology in corporation with the Department of Fisheries and Marine Research in Cyprus. Firstly a time series of pigments will be done in order to determine the concentrations of the expedient parameters such as Chlorophyll, turbidity, suspended solids (SS), temperature etc at the same time of satellite overpass. At the same time in situ spectroradiometric measurements will be taken in order to retrieve the best fitted algorithm. Statistical analysis of the data will be done for the correlation of each parameter to the in situ spectroradiometric measures. Several algorithms retrieved from the in situ data are then applied to the satellite images e.g. Landsat TM/ETM+, MODIS in order to verify the suitable algorithm for each parameter. In conclusion, the overall approach is to develop regression models in which each water quality parameter will be retrieved using image, field spectroscopy, and water quality data.

  19. Apparatus and method for improved desalination

    KAUST Repository

    Ng, Kim Choon

    2009-12-30

    A water desalination system comprising an evaporator for evaporating saline water to produce water vapor; a condenser for condensing the water vapor; wherein the evaporator and the condenser are in heat transfer communication such that heat used by the evaporator is at least in part derived from the condenser.

  20. Series Assembly of Microbial Desalination Cells Containing Stacked Electrodialysis Cells for Partial or Complete Seawater Desalination

    KAUST Repository

    Kim, Younggy

    2011-07-01

    A microbial desalination cell (MDC) is a new approach for desalinating water based on using the electrical current generated by exoelectrogenic bacteria. Previously developed MDCs have used only one or two desalination chambers with substantial internal resistance, and used low salinity catholytes containing a buffered or acid solution. Here we show that substantially improved MDC performance can be obtained even with a nonbuffered, saline catholyte, by using an electrodialysis stack consisting of 5 pairs of desalting and concentrating cells. When 4 stacked MDCs were used in series (20 total pairs of desalination chambers), the salinity of 0.06 L of synthetic seawater (35 g/L NaCl) was reduced by 44% using 0.12 L of anode solution (2:1). The resistive loss in the electrodialysis stack was negligible due to minimization of the intermembrane distances, and therefore the power densities produced by the MDC were similar to those produced by single chamber microbial fuel cells (MFCs) lacking desalination chambers. The observed current efficiency was 86%, indicating separation of 4.3 pairs of sodium and chloride ions for every electron transferred through the circuit. With two additional stages (total of 3.8 L of anolyte), desalination was increased to 98% salt removal, producing 0.3 L of fresh water (12.6:1). These results demonstrate that stacked MDCs can be used for efficient desalination of seawater while at the same time achieving power densities comparable to those obtained in MFCs. © 2011 American Chemical Society.

  1. Series assembly of microbial desalination cells containing stacked electrodialysis cells for partial or complete seawater desalination.

    Science.gov (United States)

    Kim, Younggy; Logan, Bruce E

    2011-07-01

    A microbial desalination cell (MDC) is a new approach for desalinating water based on using the electrical current generated by exoelectrogenic bacteria. Previously developed MDCs have used only one or two desalination chambers with substantial internal resistance, and used low salinity catholytes containing a buffered or acid solution. Here we show that substantially improved MDC performance can be obtained even with a nonbuffered, saline catholyte, by using an electrodialysis stack consisting of 5 pairs of desalting and concentrating cells. When 4 stacked MDCs were used in series (20 total pairs of desalination chambers), the salinity of 0.06 L of synthetic seawater (35 g/L NaCl) was reduced by 44% using 0.12 L of anode solution (2:1). The resistive loss in the electrodialysis stack was negligible due to minimization of the intermembrane distances, and therefore the power densities produced by the MDC were similar to those produced by single chamber microbial fuel cells (MFCs) lacking desalination chambers. The observed current efficiency was 86%, indicating separation of 4.3 pairs of sodium and chloride ions for every electron transferred through the circuit. With two additional stages (total of 3.8 L of anolyte), desalination was increased to 98% salt removal, producing 0.3 L of fresh water (12.6:1). These results demonstrate that stacked MDCs can be used for efficient desalination of seawater while at the same time achieving power densities comparable to those obtained in MFCs.

  2. Desalination of salty water using vacuum spray dryer driven by solar energy

    KAUST Repository

    Hamawand, Ihsan

    2016-11-18

    This paper addresses evaporation under vacuum condition with the aid from solar energy and the recovered waste heat from the vacuum pump. It is a preliminary attempt to design an innovative solar-based evaporation system under vacuum. The design details, equipment required, theoretical background and work methodology are covered in this article. Theoretically, based on the energy provided by the sun during the day, the production rate of pure water can be around 15 kg/m2/day. Assumptions were made for the worst case scenario where only 30% of the latent heat of evaporation is recycled and the ability of the dark droplet to absorb sun energy is around 50%. Both the waste heat from the pump and the heat collected from the photovoltaic (PV) panels are proposed to raise the temperature of the inlet water to the system to its boiling point at the selected reduced pressure.

  3. Design of Anion Exchange Membranes and Electrodialysis Studies for Water Desalination

    Directory of Open Access Journals (Sweden)

    Muhammad Imran Khan

    2016-05-01

    Full Text Available Anion exchange membranes are highly versatile and nowadays have many applications, ranging from water treatment to sensing materials. The preparation of anion exchange membranes (AEMs from brominated poly(2,6-dimethyl-1,6-phenylene oxide (BPPO and methyl(diphenylphosphine (MDPP for electrodialysis was performed. The physiochemical properties and electrochemical performance of fabricated membranes can be measured by changing MDPP contents in the membrane matrix. The influence of a quaternary phosphonium group associated with the removal of NaCl from water is discussed. The prepared membranes have ion exchange capacities (IEC 1.09–1.52 mmol/g, water uptake (WR 17.14%–21.77%, linear expansion ratio (LER 7.96%–11.86%, tensile strength (TS 16.66–23.97 MPa and elongation at break (Eb 485.57%–647.98%. The prepared anion exchange membranes were employed for the electrodialytic removal of 0.1 M NaCl aqueous solution at a constant applied voltage. It is found that the reported membranes could be the promising candidate for NaCl removal via electrodialysis.

  4. Life-cycle cost analysis of adsorption cycles for desalination

    KAUST Repository

    Thu, Kyaw

    2010-08-01

    This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel to desalt the sea or brackish water. Based on an experimental prototype AD plant, the life-cycle cost analysis of AD plants of assorted water production capacities has been simulated and these predictions are translated into unit cost of water production. Our results show that the specific energy consumption of the AD cycle is 1.38 kWh/m3 which is the lowest ever reported. For a plant capacity of 1000 m3/d, the AD cycle offers a unit cost of $0.457/m3 as compared to more than $0.9 for the average RO plants. Besides being cost-effective, the AD cycle is also environment-friendly as it emits less CO2 emission per m3 generated, typically 85% less, by comparison to an RO process. © 2010 Desalination Publications.

  5. Development of polyelectrolyte multilayer thin film composite membrane for water desalination application

    KAUST Repository

    Fadhillah, F.

    2013-06-01

    Thin film composite membranes were fabricated via spin assisted layer by layer (SA-LbL) assembly by depositing alternate layers of poly(allyl amine hydrochloride) (PAH) and poly(acrylic acid) (PAA) on a polysulfone (PSF) ultrafiltration membrane as support. The suitability of these membranes for potential water purification applications was explored by testing the stability of the deposited thin films and their permeation characteristic using cross-flow permeation cell. Permeation test conducted at a pressure of 40bar, temperature of 25°C, pH of 6 and feed water concentration of 2000ppm NaCl demonstrated that the PAH/PAA multilayer film deposited on polysulfone support remained stable and intact under long-term test conditions. The 120 bilayers of PAH/PAA membrane tested at the above condition showed flux of 15L/m2.h and salt rejection of 65%. The membrane performance evaluation also revealed that SA-LbL PAH/PAA membrane follows the characteristics of the solution diffusion membrane. © 2013 Elsevier B.V.

  6. Plant Watering Autonomous Mobile Robot

    Directory of Open Access Journals (Sweden)

    Hema Nagaraja

    2012-07-01

    Full Text Available Now days, due to busy routine life, people forget to water their plants. In this paper, we present a completely autonomous and a cost-effective system for watering indoor potted plants placed on an even surface. The system comprises of a mobile robot and a temperature-humidity sensing module. The system is fully adaptive to any environment and takes into account the watering needs of the plants using the temperature-humidity sensing module. The paper describes the hardware architecture of the fully automated watering system, which uses wireless communication to communicate between the mobile robot and the sensing module. This gardening robot is completely portable and is equipped with a Radio Frequency Identification (RFID module, a microcontroller, an on-board water reservoir and an attached water pump. It is capable of sensing the watering needs of the plants, locating them and finally watering them autonomously without any human intervention. Mobilization of the robot to the potted plant is achieved by using a predefined path. For identification, an RFID tag is attached to each potted plant. The paper also discusses the detailed implementation of the system supported with complete circuitry. Finally, the paper concludes with system performance including the analysis of the water carrying capacity and time requirements to water a set of plants.

  7. Valorisation of Ca and Mg by-products from mining and seawater desalination brines for water treatment applications

    OpenAIRE

    Casas Garriga, Sandra; Aladjem, Carlos; Larrotcha, Enric; Gibert Agulló, Oriol; Valderrama Angel, César Alberto; Cortina Pallás, José Luís

    2014-01-01

    BACKGROUNDBrines from the drainage of potash mine tailings and from seawater reverse osmosis (SWRO) desalination were previously evaluated as sources of NaCl for the chlor-alkali industry. Valorisation of NaCl as raw material is required to meet the membrane electrolysis specifications of NaCl saturation and control of interferences (Ca, Mg and sulphate). Brines concentration in NaCl was previously achieved for SWRO brines using electrodialysis (ED). In this work, valorisation of Ca and Mg by...

  8. Valorisation of Ca and Mg by-products from mining and seawater desalination brines for water treatment applications

    OpenAIRE

    Casas Garriga, Sandra; Aladjem, Carlos; Larrotcha, Enric; Gibert Agulló, Oriol; Valderrama Angel, César Alberto; Cortina Pallás, José Luís

    2014-01-01

    BACKGROUNDBrines from the drainage of potash mine tailings and from seawater reverse osmosis (SWRO) desalination were previously evaluated as sources of NaCl for the chlor-alkali industry. Valorisation of NaCl as raw material is required to meet the membrane electrolysis specifications of NaCl saturation and control of interferences (Ca, Mg and sulphate). Brines concentration in NaCl was previously achieved for SWRO brines using electrodialysis (ED). In this work, valorisation of Ca and Mg by...

  9. Photocatalysis: Plasmonic solar desalination

    Science.gov (United States)

    Liu, Tianyu; Li, Yat

    2016-06-01

    The sustainability of many existing desalination technologies is questionable. Plasmon-mediated solar desalination has now been demonstrated for the first time, using an aluminium structure that absorbs photons spanning the 200 nm to 2,500 nm wavelength range, and is both cheap and 'clean'.

  10. Comparison of commercial analytical techniques for measuring chlorine dioxide in urban desalinated drinking water.

    Science.gov (United States)

    Ammar, T A; Abid, K Y; El-Bindary, A A; El-Sonbati, A Z

    2015-12-01

    Most drinking water industries are closely examining options to maintain a certain level of disinfectant residual through the entire distribution system. Chlorine dioxide is one of the promising disinfectants that is usually used as a secondary disinfectant, whereas the selection of the proper monitoring analytical technique to ensure disinfection and regulatory compliance has been debated within the industry. This research endeavored to objectively compare the performance of commercially available analytical techniques used for chlorine dioxide measurements (namely, chronoamperometry, DPD (N,N-diethyl-p-phenylenediamine), Lissamine Green B (LGB WET) and amperometric titration), to determine the superior technique. The commonly available commercial analytical techniques were evaluated over a wide range of chlorine dioxide concentrations. In reference to pre-defined criteria, the superior analytical technique was determined. To discern the effectiveness of such superior technique, various factors, such as sample temperature, high ionic strength, and other interferences that might influence the performance were examined. Among the four techniques, chronoamperometry technique indicates a significant level of accuracy and precision. Furthermore, the various influencing factors studied did not diminish the technique's performance where it was fairly adequate in all matrices. This study is a step towards proper disinfection monitoring and it confidently assists engineers with chlorine dioxide disinfection system planning and management.

  11. DRINKING WATER FROM DESALINATION OF SEAWATER: OPTIMIZATION OF REVERSE OSMOSIS SYSTEM OPERATING PARAMETERS

    Directory of Open Access Journals (Sweden)

    MARWAN M. SHAMEL

    2006-12-01

    Full Text Available This paper reports on the use of pilot scale membrane separation system coupled with another pilot scale plate heat exchanger to investigate the possibilities of sweetening seawater from Telok Kalong Beach, Terengganu, Malaysia. Reverse osmosis (RO membrane of a surface area of 0.5 m2 was used during the experimental runs. Experiments were conducted at different transmembrane pressures (TMP ranged from 40 to 55 bars, operation temperature ranged from 35 to 45oC, feed concentration (TDS ranged from 34900 to 52500 ppm and cross flow velocities ranged from 1.4 to 2.1 m/s. The result show that the flux values increased linearly with TMP as well as sodium ion rejection. Permeate flux values increased proportionally with the temperature and the later effect was more significant at high pressures. The temperature changing has also influenced the rejection of sodium ion. The minerals content especially NaCl and total dissolved solid (TDS in the drinking water produced in this research are conforming to the standards of World Health Organization (WHO.

  12. Utilization of desalinated b rackish water resi dues for cultivation of the m a rine fish species, Dicentrarchus labra x, Sparus aurata, and Sciaenops ocellatus

    Directory of Open Access Journals (Sweden)

    Mutaz A. Al - Qutob

    2013-05-01

    Full Text Available The utilization of brackish water residues from desalination units for fish mariculture inPalestine could represent an environmental friendly alternative of disposing brine water which could havean adverse effect on wild life. In this study, three juvenile marine fish species (Gilt-head bream S. aurata, European sea bass D. labrax, and red drum S. ocellatus with average weights of 0.7-4.9 g, wereacclimated and reared in brine brackish water residues collected from Jericho desalination units withsalinities of 6.5 ‰ and 11 ‰ diluted sea water as control for 3-7 months. Fish were fed 56 % richprotein diet. Brine brackish water contained high levels of CL-1 (3369 mgL-1, Na+1(3735 mgL-1, K+1(300mgL-1, SO4 -2 (716 mgL-1 with the divalent ions Mg+2 (57.3 mgL-1 and Ca+2 (276 mgL-1.Theexperimental well showed more than the maximum allowable concentration of Cr (14.49 μgL-1, Ag (5.3μgL-1 and Mn (27.88 μgL-1 for water quality of fisheries use. The sea bass with an average weight of0.76 g (at a salinity of 6.5 ‰ showed an acceptable growth performance parameters and reached apercentage weight gain (% WG of 6345.23 % and a survival rate of 77.5 % compared to control groupsat 11 ‰ that reached at the same time a % WG of 6543.78 % and a survival rate of 82 % after 30weeks. The red drum juveniles reached a % WG of 2661.6 % and 2673.92 % after 15 weeks at 6.5 ‰and 11 ‰ respectively while sea bream reached a % WG of 241.63 % and 772.44 % after 15 weeks at6.5 ‰ and 11 ‰ respectively. Survival rate was only 5 % at both salinities for the two species. In afurther study sea bass fingerlings with an average weight of 20.5 g were reared in brackish water of 6.5‰ salinity for 7 weeks and were fed superior fish meal with fish oil. They received diets of 2.1 %, 3.0%, and 4.0 % of body weight. Sea bass fingerlings which received diets of 2.1 %, had the highest FCE(0.82 and PER (1.46 with the lowest FCR (1.22. These results confirm that the most

  13. Remineralization of permeate water by calcite bed in the Daoura's plant (south of Morocco)

    Science.gov (United States)

    Biyoune, M. G.; Atbir, A.; Bari, H.; Hassnaoui, L.; Mongach, E.; Khadir, A.; Boukbir, L.; Bellajrou, R.; Elhadek, M.

    2017-04-01

    To face water shortage and to fight drought, the National office of Water and Electricity (ONEE) carried out a program aiming at constructing several desalination stations of seawater in the South of Morocco. However, the final product water after desalination (osmosis water) has turned out to be unbalanced and has an aggressive character. Therefore, a post-treatment of remineralization is necessary to recover the calco-carbonic equilibrium of water and to protect the distribution network from corrosion degradation. Thereby, our work aims to examine the performance of the remineralization used in Daoura plant by the calcite bed in the absence of carbon dioxide CO2 (without acidification), we have followed many parameters indicating the performance of this technique adopted such as pH, TAC (hydroxide, carbonate and bicarbonate content), Ca content, Langelier saturation index (LSI), Larson index (LR). The results obtained show that this technique adopted in Daoura plant brings to water back its entire calco-carbonic balance to measure up to the Moroccan standards of drinking water. Generally, the exploitation of the calcite bed technique for remineralization is simple, easy and it does not require any major efforts or precautions.

  14. Environmental vigilance programmes of desalination plants. Development of an evaluations method of its application; Los Programas de Vigilancia Ambiental de las Instalaciones Desalinizadoras de Agua Marina. Desarrollo de un metodo de valoracion de su aplicacion

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Arriaga, S.; Garcia Sanchez-Colomer, M.

    2008-07-01

    This article aims to develop a working methodology to assess the application of the measures designed to avoid, reduce and, if possible, remedy significant adverse effects, included in the Environmental Vigilance Programmes. the study is based on a practical case study of the building project, currently under development, of a desalination plant located in the Spanish Mediterranean coast. A collection of measures was selected to be fulfilled in any building project of a desalination plant, and thus the requirements derivates from them. Their analysis will allow to establish the level of fulfillment (regarding to the measures taken from the Environmental Vigilance Programme or the Declaration of Environmental Impact) and the evaluation (regarding to the measures taken from specialized bibliography) of the indicators implementation. This monitoring provides the supervisor of environmental issues with a valid tool to negotiate with the developer certain modifications, with the objective or improving the effectiveness of the measures described in the Environmental Vigilance Programme. (Author) 5 refs.

  15. Environmental concerns of desalinating seawater using reverse osmosis.

    Science.gov (United States)

    Tularam, Gurudeo Anand; Ilahee, Mahbub

    2007-08-01

    This Critical Review on environmental concerns of desalination plants suggests that planning and monitoring stages are critical aspects of successful management and operation of plants. The site for the desalination plants should be selected carefully and should be away from residential areas particularly for forward planning for possible future expansions. The concerning issues identified are noise pollution, visual pollution, reduction in recreational fishing and swimming areas, emission of materials into the atmosphere, the brine discharge and types of disposal methods used are the main cause of pollution. The reverse osmosis (RO) method is the preferred option in modern times especially when fossil fuels are becoming expensive. The RO has other positives such as better efficiency (30-50%) when compared with distillation type plants (10-30%). However, the RO membranes are susceptible to fouling and scaling and as such they need to be cleaned with chemicals regularly that may be toxic to receiving waters. The input and output water in desalination plants have to be pre and post treated, respectively. This involves treating for pH, coagulants, Cl, Cu, organics, CO(2), H(2)S and hypoxia. The by-product of the plant is mainly brine with concentration at times twice that of seawater. This discharge also includes traces of various chemicals used in cleaning including any anticorrosion products used in the plant and has to be treated to acceptable levels of each chemical before discharge but acceptable levels vary depending on receiving waters and state regulations. The discharge of the brine is usually done by a long pipe far into the sea or at the coastline. Either way the high density of the discharge reaches the bottom layers of receiving waters and may affect marine life particularly at the bottom layers or boundaries. The longer term effects of such discharge concentrate has not been documented but it is possible that small traces of toxic substances used in the

  16. Fundamental and application aspects of adsorption cooling and desalination

    KAUST Repository

    Saha, Bidyut Baran

    2015-10-23

    Adsorption (AD) cycle is recently pioneered for cooling and desalination applications. For water treatment, the cycle can be used to treat highly concentrated feed water, ranging from seawater, ground water and chemically-laden waste water. This paper presents a review of the recent development of AD cycle and its hybridization with known conventional cycles such as the MED and MSF. We begin by looking at the basic sorption theory for different adsorbent-adsorbate pairs, namely (i) silica gel-water, (ii) the zeolite-water, (iii) parent Maxsorb III/ethanol, (iv) KOH-H2 surface treated Maxsorb III/ethanol, and (v) a metal organic framework (MOF) material namely, MIL-101Cr/ethanol. We also present the basic AD cycle for seawater desalination as well as its hybridization with known conventional thermally-driven cycles for efficiency improvement. We demonstrate the water production improvement by 2-3 folds by hybridization in a pilot comprising a 3-stage MED and AD plant and the top-brine temperature 50oC.

  17. Implementation of the national desalination and water purification technology roadmap : structuring and directing the development of water supply solutions.

    Energy Technology Data Exchange (ETDEWEB)

    Price, Kevin M.; Dorsey, Zachary; Miller, G. Wade; Brady, Patrick Vane; Mulligan, Conrad; Rayburn, Chris

    2006-06-01

    In the United States, economic growth increasingly requires that greater volumes of freshwater be made available for new users, yet supplies of freshwater are already allocated to existing users. Currently, water for new users is made available through re-allocation of xisting water supplies-for example, by cities purchasing agricultural water rights. Water may also be made available through conservation efforts and, in some locales, through the development of ''new'' water from non-traditional sources such as the oceans, deep aquifer rackish groundwater, and water reuse.

  18. Water Filtration Using Plant Xylem

    CERN Document Server

    Lee, Jongho; Chambers, Valerie; Venkatesh, Varsha; Karnik, Rohit

    2013-01-01

    Effective point-of-use devices for providing safe drinking water are urgently needed to reduce the global burden of waterborne disease. Here we show that plant xylem from the sapwood of coniferous trees - a readily available, inexpensive, biodegradable, and disposable material - can remove bacteria from water by simple pressure-driven filtration. Approximately 3 cm3 of sapwood can filter water at the rate of several liters per day, sufficient to meet the clean drinking water needs of one person. The results demonstrate the potential of plant xylem to address the need for pathogen-free drinking water in developing countries and resource-limited settings.

  19. Thin Film Nanocomposite Membrane Filled with Metal-Organic Frameworks UiO-66 and MIL-125 Nanoparticles for Water Desalination

    Science.gov (United States)

    Kadhom, Mohammed; Hu, Weiming; Deng, Baolin

    2017-01-01

    Knowing that the world is facing a shortage of fresh water, desalination, in its different forms including reverse osmosis, represents a practical approach to produce potable water from a saline source. In this report, two kinds of Metal-Organic Frameworks (MOFs) nanoparticles (NPs), UiO-66 (~100 nm) and MIL-125 (~100 nm), were embedded separately into thin-film composite membranes in different weight ratios, 0%, 0.05%, 0.1%, 0.15%, 0.2%, and 0.3%. The membranes were synthesized by the interfacial polymerization (IP) of m-phenylenediamine (MPD) in aqueous solution and trimesoyl chloride (TMC) in an organic phase. The as-prepared membranes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), contact angle measurement, attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy, and salt rejection and water flux assessments. Results showed that both UiO-66 and MIL-125 could improve the membranes’ performance and the impacts depended on the NPs loading. At the optimum NPs loadings, 0.15% for UiO-66 and 0.3% for MIL-125, the water flux increased from 62.5 L/m2 h to 74.9 and 85.0 L/m2 h, respectively. NaCl rejection was not significantly affected (UiO-66) or slightly improved (MIL-125) by embedding these NPs, always at >98.5% as tested at 2000 ppm salt concentration and 300 psi transmembrane pressure. The results from this study demonstrate that it is promising to apply MOFs NPs to enhance the TFC membrane performance for desalination. PMID:28613247

  20. Thin Film Nanocomposite Membrane Filled with Metal-Organic Frameworks UiO-66 and MIL-125 Nanoparticles for Water Desalination

    Directory of Open Access Journals (Sweden)

    Mohammed Kadhom

    2017-06-01

    Full Text Available Knowing that the world is facing a shortage of fresh water, desalination, in its different forms including reverse osmosis, represents a practical approach to produce potable water from a saline source. In this report, two kinds of Metal-Organic Frameworks (MOFs nanoparticles (NPs, UiO-66 (~100 nm and MIL-125 (~100 nm, were embedded separately into thin-film composite membranes in different weight ratios, 0%, 0.05%, 0.1%, 0.15%, 0.2%, and 0.3%. The membranes were synthesized by the interfacial polymerization (IP of m-phenylenediamine (MPD in aqueous solution and trimesoyl chloride (TMC in an organic phase. The as-prepared membranes were characterized by scanning electron microscopy (SEM, transmission electron microscopy (TEM, contact angle measurement, attenuated total reflection Fourier transform infrared (ATR FT-IR spectroscopy, and salt rejection and water flux assessments. Results showed that both UiO-66 and MIL-125 could improve the membranes’ performance and the impacts depended on the NPs loading. At the optimum NPs loadings, 0.15% for UiO-66 and 0.3% for MIL-125, the water flux increased from 62.5 L/m2 h to 74.9 and 85.0 L/m2 h, respectively. NaCl rejection was not significantly affected (UiO-66 or slightly improved (MIL-125 by embedding these NPs, always at >98.5% as tested at 2000 ppm salt concentration and 300 psi transmembrane pressure. The results from this study demonstrate that it is promising to apply MOFs NPs to enhance the TFC membrane performance for desalination.

  1. Conceptual Design of a Nuclear Reactor Dedicated for Desalination

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yong Hun; Moon, Jang Sik; Jeong, Yong Hoon [Korea Adavanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    The many advantages of nuclear desalination, the nuclear safety issues still remain a perennial problem today. To respond to such needs, the development of a desalination-dedicated nuclear reactor with maximized safety features was proposed. From the feasibility study, the desalination-dedicated reactor was found to be a good solution for meeting future water demand during the winter season in some countries like UAE by decoupling water and electricity supply. The economic analysis results indicated that under certain conditions, the desalination-dedicated reactor can produce freshwater at lower cost than the target nuclear cogeneration reactor using steam extraction technologies. A conceptual design of the desalination-dedicated nuclear reactor is in progress. The design features of the desalination-dedicated nuclear reactor could significantly enhance safety, reliability, and simplicity, and facilitate the extensive use of innovative passive safety systems. These maximized safety features of desalination-dedicated reactor could provide advanced capabilities for passive reactor shutdown and residual heat removal, and eventually prevent radioactivity release into the environment. The conceptual design achieved will provide a foothold for the future commercialization of the desalination-dedicated nuclear reactor and eventually help to address both a serious water crisis and nuclear safety issues.

  2. Reducing the environmental impacts of reverse osmosis desalination by using brackish groundwater resources.

    Science.gov (United States)

    Muñoz, Ivan; Fernández-Alba, Amadeo Rodríguez

    2008-02-01

    The aim of the present work is to find out whether or not, and to what extent, the environmental impacts of reverse osmosis desalination are reduced when brackish groundwater is used instead of sea water. In order to answer this question, the Life-Cycle Assessment (LCA) methodology is used, and two water production plants are compared. The brackish groundwater scenario is based on a plant located in Almería (southern Spain), while the sea water scenario is based on literature data. Four impact categories and two environmental indicators, one of them related to brine discharge, are included. The results show that the key life-cycle issue of brackish groundwater desalination is electricity consumption, and since this is substantially reduced with regard to using sea water, the life-cycle impacts are found to be almost 50% lower. An uncertainty analysis based on Monte-Carlo simulation shows that these environmental savings are significant for all impact categories. Potential local impacts provoked by brine discharge are also found to be lower, due to a reduced content of salts. It is concluded that, when and wherever possible, exploitation of brackish groundwater resources should be assigned priority to sea water resources as an input for reverse osmosis desalination, although it must be taken into account that groundwater, as opposed to sea water, is a limited resource.

  3. Solar driven membrane pervaporation for desalination processes

    NARCIS (Netherlands)

    Zwijnenberg, H.J.; Koops, G.H.; Wessling, M.

    2005-01-01

    We describe details of a solar driven pervaporation process for the production of desalinated water from highly contaminated waters. The membrane material is a polyetheramide-based polymer film of 40 ¿m thickness. This Solar Dew® membrane is used in a tubular configuration in a direct solar membrane

  4. Analysis of thermodynamic losses of heat transfer process in large-scale LT-MED desalination plant%大型低温多效蒸发海水淡化装置传热过程热力损失分析

    Institute of Scientific and Technical Information of China (English)

    沈胜强; 周士鹤; 牟兴森; 郭亚丽

    2014-01-01

    Based on correlations of flow resistance and sea water boiling point elevation (BPE) applicable to the low-temperature multiple effect distillation (LT-MED) desalination plant, the thermodynamic losses in a large-scale LT-MED desalination plant were calculated and analyzed, including the distribution and proportion of various thermodynamic losses caused by BPE and flow resistances. The effect of the number of evaporator/condenser on thermodynamic losses was studied. The result indicates that, for a large-scale LT-MED desalination plant with constant production capacity, the total thermodynamic losses increases with the number of effects. The thermodynamic loss caused by BPE constitutes the highest proportion while that by the flow resistances can not be ignored. According to the analysis on the loss, the operating characteristics of LT-MED desalination system are summarized as small temperature difference, low pressure drop, saturation states and high sensitivity.%基于低温多效蒸发海水淡化装置的各种阻力和海水沸点升高(BPE)关联式,计算了海水淡化装置中流动阻力、海水沸点升高等造成的传热过程热力损失,分析了各项热力损失在各效蒸发/冷凝器中的分布、随蒸发/冷凝器数量的变化规律等。结果表明:产水量、浓缩比和加热蒸汽温度等参数均保持不变的前提下,总的热力损失随着装置的蒸发/冷凝器数量而增加;BPE引起的热力损失占最大比例,但流动阻力引起的热力损失不可忽略。通过对海水淡化装置热力损失的分析,提出了低温多效蒸发海水淡化装置“小温差、低流阻、饱和态、高敏感”的工作特征理论。

  5. Plant Watering Autonomous Mobile Robot

    National Research Council Canada - National Science Library

    Hema Nagaraja; Reema Aswani; Monisha Malik

    2012-01-01

    .... The system comprises of a mobile robot and a temperature-humidity sensing module. The system is fully adaptive to any environment and takes into account the watering needs of the plants using the temperature-humidity sensing module...

  6. Power Plant Water Intake Assessment.

    Science.gov (United States)

    Zeitoun, Ibrahim H.; And Others

    1980-01-01

    In order to adequately assess the impact of power plant cooling water intake on an aquatic ecosystem, total ecosystem effects must be considered, rather than merely numbers of impinged or entrained organisms. (Author/RE)

  7. Ionic behavior of treated water at a water purification plant

    OpenAIRE

    Yanagida, Kazumi; Kawahigashi, Tatsuo

    2012-01-01

    [Abstract] Water at each processing stage in a water purification plant was extracted and analyzed to investigate changes of water quality. Investigations of water at each processing stage at the water purification plant are discussed herein.

  8. Ionic behavior of treated water at a water purification plant

    OpenAIRE

    Yanagida, Kazumi; Kawahigashi, Tatsuo

    2012-01-01

    [Abstract] Water at each processing stage in a water purification plant was extracted and analyzed to investigate changes of water quality. Investigations of water at each processing stage at the water purification plant are discussed herein.

  9. Review of the desalinated water market in France for small units; Apercu sur le marche de l'eau dessalee en France pour de petites unites

    Energy Technology Data Exchange (ETDEWEB)

    Dutheil, F.; Malissen, M. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    On the initiative of and in close collaboration with the Commissariat a l'Energie Atomique, the Societe pour la Conversion et le Developpement Industriel (SODIC) has carried out a very general study of the coastal regions of France in which the short, medium and long-term prospects of the demand for water, and the cost of the necessary supplies, could possibly make desalination units of 3 000 to 10 000 m3/day competitive. So far this general enquiry, which went into detail on some particular aspects, has not revealed any very clear possibilities in this respect, except in the case of the small islands, and of units of much lower capacity, as well as that of large units on the coast, which would benefit from the size effect. However the probable difference between the cost of desalinated water and the high selling price already applying in a small number of coastal regions is relatively small. It might therefore be worthwhile and relatively inexpensive to install an experimental desalination unit in the near future. (author) [French] A l'initiative du Commissariat a l'Energie Atomique et en etroite liaison avec lui, la Societe pour la Conversion et le Developpement Industriel (SODIC) a effectue une etude tres generale des zones cotieres francaises dans lesquelles les perspectives de la demande d'eau a court, moyen et long terme et le cout des approvisionnements necessaires, pourraient eventuellement faire apparaitre comme competitives des unites de dessalement de 3 a 10 000 m{sup 3}/jour. Jusqu'ici, cette enquete generale, d'ailleurs approfondie sur quelques points particuliers, n'a pas fait apparaitre de possibilites tres nettes a cet egard. Le cas des petites iles, et pour des unites de bien plus faible capacite, demeure reserve ainsi que, sur les zones cotieres, celui de grandes unites qui beneficieraient de l'effet de taille. Toutefois, l'ecart probable entre le cout de l'eau dessalee et le prix de vente eleve

  10. Algal blooms and Membrane Based Desalination Technology

    NARCIS (Netherlands)

    Villacorte, L.O.

    2014-01-01

    Seawater desalination is rapidly growing in terms of installed capacity (~80 million m3/day in 2013), plant size and global application. An emerging threat to this technology is the seasonal proliferation of microscopic algae in seawater known as algal blooms. Such blooms have caused operational pro

  11. Algal blooms and Membrane Based Desalination Technology

    NARCIS (Netherlands)

    Villacorte, L.O.

    2014-01-01

    Seawater desalination is rapidly growing in terms of installed capacity (~80 million m3/day in 2013), plant size and global application. An emerging threat to this technology is the seasonal proliferation of microscopic algae in seawater known as algal blooms. Such blooms have caused operational pro

  12. Progress in Seawater Desalination

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Scientists from the CAS Changchun Institute of Applied Chemistry have made significant progress in developing advanced expertise of seawater desalination. Their work was recently appraised and confirmed by a panel of experts in northeast China's Jilin Province.

  13. STUDY ON VARIATION OF WATER QUALITY IN THE WATER DISTRIBUTION SYSTEM AT THE REGION WHERE DESALINATED AND SURFACE WATER USED AS WATER SOURCE%海水淡化水与地表水联合供水地区市政管网水质变化研究

    Institute of Scientific and Technical Information of China (English)

    袁朋飞; 李冬; 姜松; 周川; 王曼; 张杰

    2012-01-01

    研究了我国某海岛地区以淡化水与地表水联合供水时,城市管网的水质变化情况,对比分析了淡化水与地表水的化学稳定性情况,考察了浊度、Cl-和总铁含量等主要参数在管网内的变化规律.结果表明,虽然淡化水其化学稳定性较差,但在优质管网中完全能够满足城市供水水质要求;联合供水地区城市管网水质与管道属性和停留时间存在较大关系,这与普通供水地区城市管网情况基本类似.%In this paper studied on variation of water quality in the water distribution system at the region where had desalinated water and surface water as water source, contrast the chemical stability of desalinated water and surfece water and analyzed the variation of water quality parameters including turbidity, chloride, total iron in water distribution system. The results showed that though the chemical stability of desalinated water was bad, the water quality was up to grade for drinking water through use high quality pipe; at the region where have desalinated water and surface water as water source pipeline and residence time attribute had a significant effect on the water quality this was similar as the ordinary region.

  14. A comparative life cycle assessment of process water treatment ...

    African Journals Online (AJOL)

    2011-07-29

    Jul 29, 2011 ... Two different raw water desalination technologies, an existing ion exchange plant .... tect membranes from attack by residual free chlorine. The ecoInvent ..... SON F (1999) Treatment of industrial wastewater for reuse. Desali.

  15. Algal blooms and Membrane Based Desalination Technology

    OpenAIRE

    Villacorte, L.O.

    2014-01-01

    Seawater desalination is rapidly growing in terms of installed capacity (~80 million m3/day in 2013), plant size and global application. An emerging threat to this technology is the seasonal proliferation of microscopic algae in seawater known as algal blooms. Such blooms have caused operational problems in seawater reverse osmosis (SWRO) plants due to clogging and poor effluent quality of the pre-treatment system which eventually forced the shutdown of the plant to avoid irreversible fouling...

  16. Algal blooms and Membrane Based Desalination Technology

    OpenAIRE

    Villacorte, L.O.

    2014-01-01

    Seawater desalination is rapidly growing in terms of installed capacity (~80 million m3/day in 2013), plant size and global application. An emerging threat to this technology is the seasonal proliferation of microscopic algae in seawater known as algal blooms. Such blooms have caused operational problems in seawater reverse osmosis (SWRO) plants due to clogging and poor effluent quality of the pre-treatment system which eventually forced the shutdown of the plant to avoid irreversible fouling...

  17. Solar powered desalination system using Fresnel lens

    Science.gov (United States)

    Sales, M. T. B. F.

    2016-11-01

    The Philippines is surrounded by coastal areas and these areas can be a potential source for potable water. This study aims to design and construct a solar powered desalination system using Fresnel lens. The experimental study was conducted using polluted salt water for the sample and desalination was carried out using the designed system. The desalination system was composed of the solar concentrator, solar still and the condenser system. The Fresnel lens was made of acrylic plastic and was an effective solar concentrator. Solar stills made of dark colored glass bottles were effective in absorbing the solar energy. The condenser system made of polybutylene and polystyrene were effective in condensing the vapor at ambient temperature. The shortest time of vaporization of the salt water was at 293 sec and the optimum angle of position of the lens was 36.42°. The amount of condensate collected was directly proportional to the amount of salt water in the solar still. The highest mean efficiency of the designed set-up was 34.82%. The water produced by the solar powered desalination system using Fresnel lens passed the standards set by WHO (World Health Organization) for drinking water.

  18. The power efficiency of the Tajo-Segura transfer and desalination.

    Science.gov (United States)

    Melgarejo, J; Montano, B

    2011-01-01

    The origin of the water supply system of Tajo-Segura, in 1932, goes back to when it was the unique possible solution to the shortage of hydric resources in the Confederación Hidrográfica del Segura (CHS). Its energy consumption is not homogeneous; it could be bigger or smaller, depending on the different water destination. The energy cost average of water of the Tajo-Segura water supply system is 1.21 kWh/m3. The energy consumption of desalination depends on the type of process used to desalinate the water, the time of operation and the capacity of the plant, and also on the density of water to treat. In any case, the energy consumption of the desalination ranges between 3.8 and 4.2 kWh/m3; obviously that is bigger than those obtained of the Tajo-Segura water supply system (1.21 kWh/m3).

  19. Performance study of a heat recovery tower with synthetic (polyurethane) flow channels to operate in a solar desalination unit

    OpenAIRE

    Frederico Pinheiro Rodrigues

    2010-01-01

    Because of the lack of drinkable water in various semi-arid regions and the necessary use of renewable energies, the present work presents a performance study of a heat recovery tower to operate in a solar desalination unit for decentralized water production. The solar desalination unit has two parts: a heating unit and a desalination unit.This work presents the field results with a desalination tower with synthetic (polyurethane) flow channels. The tower operation consists of the heating ...

  20. Sustainable desalination using ocean thermocline energy

    KAUST Repository

    Ng, Kim Choon

    2017-09-22

    The conventional desalination processes are not only energy intensive but also environment un-friendly. They are operating far from thermodynamic limit, 10–12%, making them un-sustainable for future water supplies. An innovative desalination processes are required to meet future sustainable desalination goal and COP21 goal. In this paper, we proposed a multi-effect desalination system operated with ocean thermocline energy, thermal energy harnessed from seawater temperature gradient. It can exploit low temperature differential between surface hot water temperature and deep-sea cold-water temperature to produce fresh water. Detailed theoretical model was developed and simulation was conducted in FORTRAN using international mathematical and statistical library (IMSL). We presented four different cases with deep-sea cold water temperature varies from 5 to 13°C and MED stages varies from 3 to 6. It shows that the proposed cycle can achieve highest level of universal performance ratio, UPR = 158, achieving about 18.8% of the ideal limit. With the major energy input emanated from the renewable solar, the proposed cycle is truly a “green desalination” method of low global warming potential (GWP), best suited for tropical coastal shores having bathymetry depths up to 300m or more.

  1. Desalination by biomimetic aquaporin membranes: Review of status and prospects

    DEFF Research Database (Denmark)

    Tang, C.Y.; Zhao, Y.; Wang, R.

    2013-01-01

    Based on their unique combination of offering high water permeability and high solute rejection aquaporin proteins have attracted considerable interest over the last years as functional building blocks of biomimetic membranes for water desalination and reuse. The purpose of this review is to prov......Based on their unique combination of offering high water permeability and high solute rejection aquaporin proteins have attracted considerable interest over the last years as functional building blocks of biomimetic membranes for water desalination and reuse. The purpose of this review...... is to provide an overview of the properties of aquaporins, their preparation and characterization. We discuss the challenges in exploiting the remarkable properties of aquaporin proteins for membrane separation processes and we present various attempts to construct aquaporin in membranes for desalination......; including an overview of our own recent developments in aquaporin-based membranes. Finally we outline future prospects of aquaporin based biomimetic membrane for desalination and water reuse....

  2. Nanoporous Carbon Nitride: A High Efficient Filter for Seawater Desalination

    CERN Document Server

    Li, Weifeng; Zhou, Hongcai; Zhang, Xiaoming; Zhao, Mingwen

    2015-01-01

    The low efficiency of commercially-used reverse osmosis (RO) membranes has been the main obstacle in seawater desalination application. Here, we report the auspicious performance, through molecular dynamics simulations, of a seawater desalination filter based on the recently-synthesized graphene-like carbon nitride (g-C2N) [Nat. Commun., 2015, 6, 6486]. Taking advantage of the inherent nanopores and excellent mechanical properties of g-C2N filter, highly efficient seawater desalination can be achieved by modulating the nanopores under tensile strain. The water permeability can be improved by two orders of magnitude compared to RO membranes, which offers a promising approach to the global water shortage solution.

  3. Desalination plan with nuclear reactors as part of a sustainable development program in Mexico; Plan de desalinizacion con reactores nucleares como parte de un programa de desarrollo sustentable en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Rojas A, O; Calleros M, G., E-mail: oziel.rojas.siimisa@gmail.com [Soluciones en Instrumentacion Integral y Mantenimiento Industrial y Servicios, S. A. de C. V. (Mexico)

    2016-09-15

    This paper presents a project for the desalination of seawater with nuclear reactors, in order to supply fresh water to the populations near to the nuclear power plant. A case study is proposed with the nuclear power plant of Laguna Verde, implementing a system that allows taking advantage of the residual heat of the seawater condensate stage and with this, to supply drinking water to the surrounding localities where the vital liquid is scarce. In addition, legislation is proposed to allow some of the thermal energy generated by reactors producing electrical energy in Mexico to be used for the desalination of seawater and/or hydrogen production. (Author)

  4. Modeling of electrokinetic desalination of bricks

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2012-01-01

    . The system of equations includes the transport of water and the resulting advective flow of the aqueous species. The model takes into account transient change in porosity and its impact on transport. Test examples were performed and compared to experimental data for electrokinetic desalination treatment...

  5. Predicting the Specific Energy Consumption of Reverse Osmosis Desalination

    Directory of Open Access Journals (Sweden)

    Ashlynn S. Stillwell

    2016-12-01

    Full Text Available Desalination is often considered an approach for mitigating water stress. Despite the abundance of saline water worldwide, additional energy consumption and increased costs present barriers to widespread deployment of desalination as a municipal water supply. Specific energy consumption (SEC is a common measure of the energy use in desalination processes, and depends on many operational and water quality factors. We completed multiple linear regression and relative importance statistical analyses of factors affecting SEC using both small-scale meta-data and municipal-scale empirical data to predict the energy consumption of desalination. Statistically significant results show water quality and initial year of operations to be significant and important factors in estimating SEC, explaining over 80% of the variation in SEC. More recent initial year of operations, lower salinity raw water, and higher salinity product water accurately predict lower values of SEC. Economic analysis revealed a weak statistical relationship between SEC and cost of water production. Analysis of associated greenhouse gas (GHG emissions revealed important considerations of both electricity source and SEC in estimating the GHG-related sustainability of desalination. Results of our statistical analyses can aid decision-makers by predicting the SEC of desalination to a reasonable degree of accuracy with limited data.

  6. 海水淡化水在既有管网中的水质变化研究%Water Quality Change of Desalinated Seawater in Existing Water Distribution Systems

    Institute of Scientific and Technical Information of China (English)

    骆碧君; 刘志强; 郑毅; 李振中; 韩丹

    2009-01-01

    In the laboratory, a small-scale pipe network was set up to simulate the distribution process of tap water and desalinated seawater in existing municipal pipe networks. The pH, alkalinity, Langelier saturation index and Ryznar index were chosen as the evaluation indexes of chemical instability. The results show that the desalinated seawater is chemically instable, since its alkalinity is much lower than the tape water, and it is non-saturated (Langelier saturation index of -3.25) and strong corrosive (Ryznar index of 13.92). The accumulated pipe scale is easily dissolved and the corrosion of the inner pipe wall is accelerated when the desalinated seawater enters the existing water distribution systems.%通过在实验室搭建小型管网,模拟了自来水及海水淡化水在已有市政管网中的输配过程,并选取pH、碱度、Langelier饱和指数和Ryznar指数作为控制指标来评价其化学稳定性.结果表明,海水淡化水的碱度极低,具有不饱和性(Langelier饱和指数为-3.25)和强腐蚀倾向(Ryznar指数为13.92),即化学不稳定性,进入既有管网后易溶解原先积存的管垢,并加速金属管道内壁腐蚀.

  7. Application of Electrosorption Desalination Technology in Mine Water Advanced Treatment Project%电吸附除盐技术用于矿井水深度处理

    Institute of Scientific and Technical Information of China (English)

    宋恩民; 王峰

    2011-01-01

    A large amount of mine water is produced during coal mining, and a considerable part of the mine water can not be effectively used due to the higher cost of advanced treatment. A project case of using the electrosorption desalination technology for mine water advanced treatment is described, including the scheme selection, the process, the project implementation effect and the main technical and economic indicators. The practice shows that the technology is feasible for the mine water advanced treatment.%煤矿在开采过程中会产生大量的矿井水,其中有相当一部分矿井水由于深度处理成本高而不能有效利用.介绍了利用电吸附除盐技术对矿井水进行深度处理的工程案例,包括方案选择、工艺流程、工程实施效果及主要技术经济指标.实践表明,该技术用于矿井水深度处理是可行的.

  8. Desalination with carbon aerogel electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J.C.; Richardson, J.H.; Fix, D.V.

    1996-10-21

    An electrically regenerated electrosorption process known as carbon aerogel CDI was developed for continuously removing ionic impurities from aqueous streams. A salt solution flows in a channel formed by pairs of parallel carbon aerogel electrodes. Each electrode has a very high BET surface area and very low resistivity. After polarization, anions and cations are removed from electrolyte by the electric field and electrosorbed onto the carbon aerogel. The solution is thus separated into two streams, brine and water. Based on this, carbon aerogel CDI appears to be an energy-efficient alternative to evaporation, electrodialysis, and reverse osmosis. The energy required by this process is about QV/2, plus losses. Estimated energy requirement for sea water desalination is 18-27 Wh gal{sup -1}, depending on cell voltage and flow rate. The requirement for brackish water desalination is less, 1.2-2.5 Wh gal{sup -1} at 1600 ppM. This is assuming that stored electrical energy is reclaimed during regeneration.

  9. An Improved Multi-Evaporator Adsorption Desalination Cycle for GCC Countries

    KAUST Repository

    Shahzad, Muhammad Wakil

    2017-03-29

    In Gulf Cooperation Council (GCC) countries, cogeneration based desalination processes consume almost 25% of the total annual energy and it is increasing at 2.2% annually. The high fresh water demand is attributed to high gross domestic product (GDP) growth rate, 24%, and the high water languishes, more than 10%. Over the past two decades, GCC countries have spent tens of billion dollars to expand their present and planned desalination capacities. It is foreseeable that with business-as-usual scenario, the domestic oil consumption of Saudi Arabia may exceed its production capacity by 2040. Innovative and sustainable water production solutions are needed urgently for future water supplies without environment impact. In this paper, a hybrid desalination cycle is proposed by integrating multi cascaded-evaporators (CE) with an adsorption cycle (AD). In this new innovative cycle, AD desorbed vapors are supplied to the CE to exploit the latent condensation energy within the evaporators arranged in both pressures-temperatures cascaded manner to improves the performance ratio (PR) of the cycle. Hybrid cycle shows more than 10 folds water production improvement as compared to conventional AD cycle due to synergetic effect. This concept is demonstrated in a laboratory pilot plant using a 3 cascaded evaporators pilot and simulation of 8 evaporators hybrid cycle.

  10. A ten liter stacked microbial desalination cell packed with mixed ion-exchange resins for secondary effluent desalination.

    Science.gov (United States)

    Zuo, Kuichang; Cai, Jiaxiang; Liang, Shuai; Wu, Shijia; Zhang, Changyong; Liang, Peng; Huang, Xia

    2014-08-19

    The architecture and performance of microbial desalination cell (MDC) have been significantly improved in the past few years. However, the application of MDC is still limited in a scope of small-scale (milliliter) reactors and high-salinity-water desalination. In this study, a large-scale (>10 L) stacked MDC packed with mixed ion-exchange resins was fabricated and operated in the batch mode with a salt concentration of 0.5 g/L NaCl, a typical level of domestic wastewater. With circulation flow rate of 80 mL/min, the stacked resin-packed MDC (SR-MDC) achieved a desalination efficiency of 95.8% and a final effluent concentration of 0.02 g/L in 12 h, which is comparable with the effluent quality of reverse osmosis in terms of salinity. Moreover, the SR-MDC kept a stable desalination performance (>93%) when concentrate volume decreased from 2.4 to 0.1 L (diluate/concentrate volume ratio increased from 1:1 to 1:0.04), where only 0.875 L of nonfresh water was consumed to desalinate 1 L of saline water. In addition, the SR-MDC achieved a considerable desalination rate (95.4 mg/h), suggesting a promising application for secondary effluent desalination through deriving biochemical electricity from wastewater.

  11. Algal blooms: an emerging threat to seawater reverse osmosis desalination

    KAUST Repository

    Villacorte, Loreen O.

    2014-08-04

    Seawater reverse osmosis (SWRO) desalination technology has been rapidly growing in terms of installed capacity and global application over the last decade. An emerging threat to SWRO application is the seasonal proliferation of microscopic algae in seawater known as algal blooms. Such blooms have caused operational problems in SWRO plants due to clogging and poor effluent quality of the pre-treatment system which eventually forced the shutdown of various desalination plants to avoid irreversible fouling of downstream SWRO membranes. This article summarizes the current state of SWRO technology and the emerging threat of algal blooms to its application. It also highlights the importance of studying the algal bloom phenomena in the perspective of seawater desalination, so proper mitigation and preventive strategies can be developed in the near future. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

  12. Design and simulation of a process of seawater desalination (MED) using the residual heat of a PBMR nuclear power plant; Diseno y simulacion de un proceso de desalinizacion de agua de mar (MED) utilizando el calor residual de una planta nucleoelectrica PBMR

    Energy Technology Data Exchange (ETDEWEB)

    Valle H, Julio; Morales S, J.B. [UNAM, DEPFI Campus Morelos, Jiutepec, Morelos (Mexico)]. e-mail: jms0620@yahoo.com

    2008-07-01

    In the present work it is demonstrated as the thermodynamic recuperative Brayton cycle with which operates a nuclear power plant type PBMR (Pebble Bed Modular Reactor) it allows to use the residual heat, removed in the coolers of the compression stage of the system, to produce vapor and to desalt seawater. The desalination process selected, starting from its operation characteristics and the derived advantages of them using nuclear heat, it the one of Multi-Effect Distillation, MED for its abbreviations in English, which described and it is justified to detail. This distillation process widely studied, allows us to use water vapor pressurized to temperatures between 70 and 110 C like energy source to evaporate the seawater in the first stage or effect of the process. The relatively low temperatures with which the vapor takes place of feeding to the process is it makes to the plant PBMR ideal for desalination of seawater, since does not require majors modifications to its design its operation, and on the contrary it allows to use the heat that previously was rejected, to produce the vapor. In this work an unit MED of six effects is designed, which undergoes a successive fall of pressure in each of them. Once obtained the agreed design to the conditions of operation of PBMR plant, it was model mathematically the MED process, including the coupling stage with the reactor coolers. The mathematical model was obtained by means of differential equations of mass balance and energy in the system, and with this it was implemented in SIMULINK a model equivalent to the MED process which is interconnected to the simulator coolers of the PBMR plant, constructed previously. One ran the program being obtained the results that are reported at the end of this article. (Author)

  13. 倒极电去离子苦咸水淡化技术的试验研究%BRACKISH WATER DESALINATION BY ELECTRODEIONIZATION WITH POLARITY REVERSAL

    Institute of Scientific and Technical Information of China (English)

    陈维利; 王建友; 费兆辉; 樊改肖

    2012-01-01

    在常规电去离子(EDI)的浓缩室中采取与淡水室相同的树脂填充策略构成频繁倒极电去离子(EDIR)过程,以模拟苦咸水为处理对象,重点考察了阴阳树脂比例、树脂粒径、隔板厚度、树脂填充方式对EDI苦咸水淡化过程的影响.结果表明,在阴阳树脂体积比4∶6、树脂粒径0.45~0.71mm、采用隔板厚度3mm以及树脂均匀混合填充时,可获得最低的产水能耗.对于3000mg/L的进水含盐量,EDIR的脱盐率可达90%以上,耗电量1.95kWh/m3,过程运行稳定.EDIR有望成为具备较强竞争力的苦咸水淡化新技术.%In this paper, the electrodeionization process with frequent polarity reversal (EDIR) process, using the same resin filling strategy both in the dilute and concentrate compartments, was carried out for brackish water desalination. With the feed of simulated brackish water, the influences of volume ratio of anion-cation resins, resin particle size distribution, compartment thickness and resin filling pattern on the separation performances of the EDIR were investigated. The results showed that at a resin ratio of 4:6 (anion to cation), resin particle range of 0.45 to 0.71 mm and the compartment thickness of 3 mm, the lowest power Consumption was achieved when the even mixing pattern of resin filling was adopted. When the feed TDS was 3 000 mg/L, the EDIR can give a salt rejection of 90% while the power consumption was 1.95 kWh/m3 with good stability. The EDIR was hopeful to be a new choice for brackish water desalination with potential superiorities.

  14. Electrokinetic desalination of sandstones for NaCl removal

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben V.

    2012-01-01

    of reliable methods to remove the damaging salts in order to stop the decay. Electrokinetic desalination of fired clay bricks have previously shown efficient in laboratory scale and in the present work the method is tested for desalination of Cotta and Posta sandstones, which both have lower porosity than...... the bricks studied. The stones were contaminated with NaCl by submersion prior to the desalination experiments, where an electric DC field was applied to the stones from electrodes placed in clay poultice. Two poultice types were tested: calcareous clay used brick production and a mixture of kaolinite...... surface) applied. At the end of all desalination experiments the water content in the poultice at the cathode was higher than in the poultice at the anode, revealing electroosmotic water transport. The water profiles in the stones, however, did not indicate electoosmosis as they were quite uniform within...

  15. An experimental investigation on MEDAD hybrid desalination cycle

    KAUST Repository

    Shahzad, Muhammad Wakil

    2015-04-02

    This paper presents an advanced desalination cycle called "MEDAD" desalination which is a hybrid of the conventional multi-effect distillation (MED) and an adsorption cycle (AD). The combined cycles allow some of MED stages to operate below ambient temperature, as low as 5. °C in contrast to the conventional MED. The MEDAD cycle results in a quantum increase of distillate production at the same top-brine condition. Being lower than the ambient temperature for the bottom stages of hybrid cycle, ambient energy can now be scavenged by the MED processes whilst the AD cycle is powered by low temperature waste heat from exhaust or renewable sources. In this paper, we present the experiments of a 3-stage MED and MEDAD plants. These plants have been tested at assorted heat source temperatures from 15. °C to 70. °C and with portable water as a feed. All system states are monitored including the distillate production and power consumption and the measured results are expressed in terms of performance ratio (PR). It is observed that the synergetic matching of MEDAD cycle led to a quantum increase in distillate production, up to 2.5 to 3 folds vis-a-vis to a conventional MED of the same rating. © 2015 Elsevier Ltd.

  16. Contribution to the optimization of the coupling of nuclear reactors to desalination processes; Contribution a l'optimisation du couplage des reacteurs nucleaires aux procedes de dessalement

    Energy Technology Data Exchange (ETDEWEB)

    Dardour, S

    2007-04-15

    This work deals with modelling, simulation and optimization of the coupling between nuclear reactors (PWR, modular high temperature reactors) and desalination processes (multiple effect distillation, reverse osmosis). The reactors considered in this study are PWR (Pressurized Water Reactor) and GTMHR (Gas Turbine Modular Helium Reactor). The desalination processes retained are MED (Multi Effect Distillation) and SWRO (Sea Water Reverse Osmosis). A software tool: EXCELEES of thermodynamic modelling of coupled systems, based on the Engineering Algebraic Equation Solver has been developed. Models of energy conversion systems and of membrane desalination processes and distillation have been developed. Based on the first and second principles of thermodynamics, these models have allowed to determine the optimal running point of the coupled systems. The thermodynamic analysis has been completed by a first economic evaluation. Based on the use of the DEEP software of the IAEA, this evaluation has confirmed the interest to use these types of reactors for desalination. A modelling tool of thermal processes of desalination in dynamic condition has been developed too. This tool has been applied to the study of the dynamics of an existing plant and has given satisfying results. A first safety checking has been at last carried out. The transients able to jeopardize the integrated system have been identified. Several measures aiming at consolidate the safety have been proposed. (O.M.)

  17. Entropy Generation Analysis of Desalination Technologies

    Directory of Open Access Journals (Sweden)

    John H. Lienhard V

    2011-09-01

    Full Text Available Increasing global demand for fresh water is driving the development and implementation of a wide variety of seawater desalination technologies. Entropy generation analysis, and specifically, Second Law efficiency, is an important tool for illustrating the influence of irreversibilities within a system on the required energy input. When defining Second Law efficiency, the useful exergy output of the system must be properly defined. For desalination systems, this is the minimum least work of separation required to extract a unit of water from a feed stream of a given salinity. In order to evaluate the Second Law efficiency, entropy generation mechanisms present in a wide range of desalination processes are analyzed. In particular, entropy generated in the run down to equilibrium of discharge streams must be considered. Physical models are applied to estimate the magnitude of entropy generation by component and individual processes. These formulations are applied to calculate the total entropy generation in several desalination systems including multiple effect distillation, multistage flash, membrane distillation, mechanical vapor compression, reverse osmosis, and humidification-dehumidification. Within each technology, the relative importance of each source of entropy generation is discussed in order to determine which should be the target of entropy generation minimization. As given here, the correct application of Second Law efficiency shows which systems operate closest to the reversible limit and helps to indicate which systems have the greatest potential for improvement.

  18. Renewable energy-driven innovative energy-efficient desalination technologies

    KAUST Repository

    Ghaffour, Noreddine

    2014-04-13

    Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3-4 kW h_e/m3). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h_e/m3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source within the geothermal reservoir and provide the most effective use of RE without the need for energy storage. This paper highlights the use of RE for desalination in KSA with a focus on our group\\'s contribution in developing innovative low energy-driven desalination technologies. © 2014 Elsevier Ltd. All rights reserved.

  19. Research on Operation of Solar Brackish Water (Seawater) Desalination System%太阳能苦咸水(海水)淡化系统的运行研究

    Institute of Scientific and Technical Information of China (English)

    陈志莉; 何强; 庄春龙; 郑宏飞; 易其臻

    2009-01-01

    Based on the mechanism of the falling film evaporation and the falling film condensa-tion, a brackish water (seawater) desalination unit with three effect regeneration was designed. The sys-tem is powered by a solar collector and a wind generator, and the matching optimization of the system is realized. The actual operation effect of the system is tested. The system can produce the freshwater of 12 the temperature and flow of the heating and cooling water and the operation pressure.%研制了集激淋降膜蒸发、降膜凝结与多效回热于一体的苦咸水(海水)淡化装置,其采用太阳能集热系统提供热源、风力发电提供动力,并实现了整个系统的匹配优化.测试了系统的实际运行效果,结果表明,在太阳能辐射为20 MJ/d时,系统的产水量可达12 kg/(m~2·d)以上.供热水和冷却水的温度和流量、运行压力是影响系统产水量的主要因素.

  20. Solar-Powered Desalination: A Modelling and Experimental Study

    Science.gov (United States)

    Leblanc, Jimmy; Andrews, John

    2007-10-01

    Water shortage is becoming one of the major problems worldwide. As such, desalination technologies have been implemented to meet growing demands for fresh water. Among the desalination technologies, thermal desalination, including multi stage flash (MSF) and multi effect evaporation (MEE), is the current leading desalination process. Reverse osmosis (RO) is also being increasingly used. Despite technological improvements, thermal desalination and reverse osmosis continue to be intensive fossil-fuel consumers and contribute to increased levels of greenhouse gases. As energy costs rise, thermal desalination by solar energy and/or low cost waste heat is likely to become increasingly attractive. As part of a project investigating the productive use of saline land and the development of sustainable desalination systems, the feasibility of producing potable water from seawater or brackish water using desalination systems powered by renewable energy in the form of low-temperature solar-thermal sources has been studied. A salinity-gradient solar pond and an evacuated tube solar collector system have been used as heat sources. Solar ponds combine solar energy collection with long-term storage and can provide reliable thermal energy at temperature ranges from 50 to 90 °C. A visual basic computer model of the different multi-stage flash desalination processes coupled with a salinity-gradient solar pond was developed to determine which process is preferable in regards to performance and greenhouse impact. The governing mathematical equations are derived from mass balances, heat energy balances, and heat transfer characteristics. Using the results from the modelling, a small-scale solar-powered desalination system, capable of producing up to 500 litres of fresh water per day, was designed and manufactured. This single-stage flash system consists of two main units: the heat supply and storage system and the flash desalination unit. Two different condenser heat exchanger

  1. Generalized Least Energy of Separation for Desalination and Other Chemical Separation Processes

    Directory of Open Access Journals (Sweden)

    Karan H. Mistry

    2013-05-01

    Full Text Available Increasing global demand for fresh water is driving the development and implementation of a wide variety of seawater desalination technologies driven by different combinations of heat, work, and chemical energy. This paper develops a consistent basis for comparing the energy consumption of such technologies using Second Law efficiency. The Second Law efficiency for a chemical separation process is defined in terms of the useful exergy output, which is the minimum least work of separation required to extract a unit of product from a feed stream of a given composition. For a desalination process, this is the minimum least work of separation for producing one kilogram of product water from feed of a given salinity. While definitions in terms of work and heat input have been proposed before, this work generalizes the Second Law efficiency to allow for systems that operate on a combination of energy inputs, including fuel. The generalized equation is then evaluated through a parametric study considering work input, heat inputs at various temperatures, and various chemical fuel inputs. Further, since most modern, large-scale desalination plants operate in cogeneration schemes, a methodology for correctly evaluating Second Law efficiency for the desalination plant based on primary energy inputs is demonstrated. It is shown that, from a strictly energetic point of view and based on currently available technology, cogeneration using electricity to power a reverse osmosis system is energetically superior to thermal systems such as multiple effect distillation and multistage flash distillation, despite the very low grade heat input normally applied in those systems.

  2. Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.

    Energy Technology Data Exchange (ETDEWEB)

    Elcock, D. (Environmental Science Division)

    2011-05-09

    desalination. Some of the direct approaches, such as dry air cooling, desalination, and recovery of cooling tower water for boiler makeup water, are costly and are deployed primarily in countries with severe water shortages, such as China, Australia, and South Africa. Table 1 shows drivers and approaches for reducing freshwater consumption in several countries outside the United States. Indirect approaches reduce water consumption while meeting other objectives, such as improving plant efficiency. Plants with higher efficiencies use less energy to produce electricity, and because the greater the energy production, the greater the cooling water needs, increased efficiency will help reduce water consumption. Approaches for improving efficiency (and for indirectly reducing water consumption) include increasing the operating steam parameters (temperature and pressure); using more efficient coal-fired technologies such as cogeneration, IGCC, and direct firing of gas turbines with coal; replacing or retrofitting existing inefficient plants to make them more efficient; installing high-performance monitoring and process controls; and coal drying. The motivations for increasing power plant efficiency outside the United States (and indirectly reducing water consumption) include the following: (1) countries that agreed to reduce carbon emissions (by ratifying the Kyoto protocol) find that one of the most effective ways to do so is to improve plant efficiency; (2) countries that import fuel (e.g., Japan) need highly efficient plants to compensate for higher coal costs; (3) countries with particularly large and growing energy demands, such as China and India, need large, efficient plants; (4) countries with large supplies of low-rank coals, such as Germany, need efficient processes to use such low-energy coals. Some countries have policies that encourage or mandate reduced water consumption - either directly or indirectly. For example, the European Union encourages increased efficiency

  3. APPLICATION OF REVERSE OSMOSIS TECHNOLOGY TO THE DESALINATION PROCESS IN SUPPLEMENT WATER FOR SUBMERGED ARC FURNACE%反渗透技术在矿热炉补充水除盐工艺的应用

    Institute of Scientific and Technical Information of China (English)

    吴秋勤; 曾世林; 王正

    2015-01-01

    This paper introduced the application of reverse osmosis technology to the desalination process in supplement water for submerged arc furnace. It tested the effects of original water suspended matter concentration,hardness and static pressure difference both sides of RO membrane on system operation, water yield and desalination rate. The result shows that original water suspended matter has great effects on system water production and original water hardness has less ef-fect on RO water production. It is beneficial to enhance desalination to decrease the static pressure difference both sides of RO membrane. It plays a key role in normal operation of system to increase combined deep pretreatment, decrease the original water concentration and strengthen germicide and algicide in pretreatment stage.%介绍了反渗透技术在矿热炉补充水除盐工艺中的应用,并进行了原水悬浮物浓度、硬度和RO膜两侧静压差对系统运行状况、产水量和除盐率影响的测试.结果表明,原水悬浮物对系统产水量有严重影响;原水硬度对RO产水量影响相对较小;RO膜两侧静差降低,有利于提高除盐率.增加组合深度预处理工序,降低原水的悬浮物浓度,强化预处理阶段杀菌灭藻,对除盐系统设备正常运行起关键作用.

  4. Capacity building strategies and policy for desalination using renewable energies in Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudi, Hacene; Abdellah, Ouagued [Laboratory of Water and Environment, Hassiba Ben Bouali University, Chlef, BP151 (Algeria); Ghaffour, Noreddine [Middle East Desalination Research Center, P.O. Box 21, P.C. 133, Muscat (Oman)

    2009-05-15

    The integration of renewable resources in desalination and water purification is becoming increasingly attractive. This is justified by the fact that areas of fresh water shortages have plenty of solar energy and these technologies have low operating and maintenance costs. In this paper, an overview of capacity building strategy and policy for desalination in Algeria is presented. Importance of training and education on renewable energies is also outlined. The contribution of the Middle East Desalination Research Center in capacity building and research and development in desalination in Algeria is also presented. (author)

  5. Effect Anticipation of Boron on Seawater Reverse Osmosis Desalination Development%硼对反渗透海水淡化发展的影响预期

    Institute of Scientific and Technical Information of China (English)

    葛云红; 冯厚军

    2011-01-01

    Comparing to the need for economic and social development, water resources are severely deficient, which leads to fast development of seawater desalination at home and abroad. Desalination plants tend to large scale, and the use extends from industrial to municipal water supply. Many people suspect the security of desalinated seawater as drinking water, and boron is a problem which draws people' s attention. The present forms of boron in seawater, boron level in desalinated seawater by different seawater desalination methods, boron removal methods and influencing factors are summarized. The boron removal situation in international large-scale seawater reverse osmosis desalination projects, effects of boron on human health and crop, drinking water quality guidelines for boron at home and abroad and their developing trend are introduced.%水资源量与经济社会发展需求相比严重不足,使得海水淡化迅速发展起来,规模呈大型化发展趋势,用途也逐渐从工业向市政供水扩展.很多人对海水淡化水作为饮用水的安全性存在疑虑,其中硼是人们一直比较关注的问题.概括了硼在海水中的存在形式、不同海水淡化方法产水的硼含量、脱硼方法及影响因素分析,同时介绍了国外大型反渗透海水淡化工程的脱硼情况、硼对人体健康的影响和对农作物的影响,以及国内外饮用水水质标准对硼含量的规定和发展趋势.

  6. Future sustainable desalination using waste heat: kudos to thermodynamic synergy

    KAUST Repository

    Shahzad, Muhammad Wakil

    2015-12-02

    There has been a plethora of published literature on thermally-driven adsorption desalination (AD) cycles for seawater desalination due to their favorable environmentally friendly attributes, such as the ability to operate with low-temperature heat sources, from either the renewable or the exhaust gases, and having almost no major moving parts. We present an AD cycle for seawater desalination due to its unique ability to integrate higher water production yields with the existing desalination methods such as reverse osmosis (RO), multi-stage flashing (MSF) and multi-effect distillation (MED), etc. The hybrid cycles exploit the thermodynamic synergy between processes, leading to significant enhancement of the systems\\' performance ratio (PR). In this paper, we demonstrate experimentally the synergetic effect between the AD and MED cycles that results in quantum improvement in water production. The unique feature is in the internal latent heat recovery from the condenser unit of AD to the top-brine stage of MED, resulting in a combined, or simply termed as MEAD, cycle that requires no additional heat input other than the regeneration of an adsorbent. The batch-operated cycles are simple to implement and require low maintenance when compared with conventional desalination methods. Together, they offer a low energy and environmentally friendly desalination solution that addresses the major issues of the water-energy-environment nexus. © 2016 The Royal Society of Chemistry.

  7. Wet water glass production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for a wet hydrate dissolution plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects, a production plant of a capacity of 75,000 t/y was manufactured, at "Zeolite Mira", Mira (VE, Italy, in 1997. and 1998, increasing detergent zeolite production, from 50,000 to 100,000 t/y. Several goals were realized by designing a wet hydrate dissolution plant. The main goal was increasing the detergent zeolite production. The technological cycle of NaOH was closed, and no effluents emitted, and there is no pollution (except for the filter cake. The wet water glass production process is fully automatized, and the product has uniform quality. The production process can be controlled manually, which is necessary during start - up, and repairs. By installing additional process equipment (centrifugal pumps and heat exchangers technological bottlenecks were overcome, and by adjusting the operation of autoclaves, and water glass filters and also by optimizing the capacities of process equipment.

  8. ELECTRIC ADSORPTION TREATMENT STUDY ON REFINERY REVERSE OSMOSIS CONDENSED WATER DESALINATION%电吸附法处理炼化反渗透浓水脱盐研究

    Institute of Scientific and Technical Information of China (English)

    张国珍; 李娜; 武福平; 杨公博; 杨仕超

    2012-01-01

    采用电吸附法对反渗透浓水进行处理,先研究了不同盐含量、电压、流量、初始pH等因素对NaCl模拟水去除效果的影响,得出适宜参数,再分别通过单级和多级电吸附法处理反渗透浓水,分析脱盐效果.结果表明,NaCl模拟水在初始电导率为2 mS/cm时,pH为7.56、电压1.8V、体积流量10 mL/min时处理效果最优,单级脱盐率达到17.18%;反渗透浓水在初始电导率为2 mS/cm时,以pH为7.17、电压为1.8 V、体积流量为10 mL/min时处理,单级脱盐率达到15.86%,经过3级处理后脱盐率达到了46.02%.%The thesis adopted electric adsorption processing to treat the reverse osmosis condensed water, first, studying simulation solution of NaCl desalination effects on some factors such as different concentrations, voltage, flow, initial pH, and obtain the best parameters by experiment condition, then by dealing with reverse osmosis condensed water to analysis desalination effect with single stage and several stages respectively. The results showed that when the initial conductivity of the simulation solution of NaCl desalination in was 2 mS/cm, pH was 7.56, the voltage was 1.8 V, the velocity was 10 mL/min, the treatment effect achieved the best, the desalination rate reached 17.18%. When the initial conductivity of condensed water was 2 mS/cm, the pH was 7.17, the voltage was 1.8 V, the velocity was 10 mL/min, the single stage desalination rate reached 15.86%, which reached 46.02% after through three stages.

  9. Hybrid membrane system for desalination and wastewater treatment: Integrating forward osmosis and low pressure reverse osmosis

    NARCIS (Netherlands)

    Valladares Linares, R.

    2014-01-01

    Since more than 97% of the water in the world is seawater, desalination technologies have the potential to solve the fresh water crisis. The most used desalination technology nowadays is seawater reverse osmosis (SWRO), where a membrane is used as a physical barrier to separate the salts from the wa

  10. Hybrid membrane system for desalination and wastewater treatment: Integrating forward osmosis and low pressure reverse osmosis

    NARCIS (Netherlands)

    Valladares Linares, R.

    2014-01-01

    Since more than 97% of the water in the world is seawater, desalination technologies have the potential to solve the fresh water crisis. The most used desalination technology nowadays is seawater reverse osmosis (SWRO), where a membrane is used as a physical barrier to separate the salts from the

  11. Algal toxins and reverse osmosis desalination operations: laboratory bench testing and field monitoring of domoic acid, saxitoxin, brevetoxin and okadaic acid.

    Science.gov (United States)

    Seubert, Erica L; Trussell, Shane; Eagleton, John; Schnetzer, Astrid; Cetinić, Ivona; Lauri, Phil; Jones, Burton H; Caron, David A

    2012-12-01

    The occurrence and intensity of harmful algal blooms (HABs) have been increasing globally during the past few decades. The impact of these events on seawater desalination facilities has become an important topic in recent years due to enhanced societal interest and reliance on this technology for augmenting world water supplies. A variety of harmful bloom-forming species of microalgae occur in southern California, as well as many other locations throughout the world, and several of these species are known to produce potent neurotoxins. These algal toxins can cause a myriad of human health issues, including death, when ingested via contaminated seafood. This study was designed to investigate the impact that algal toxin presence may have on both the intake and reverse osmosis (RO) desalination process; most importantly, whether or not the naturally occurring algal toxins can pass through the RO membrane and into the desalination product. Bench-scale RO experiments were conducted to explore the potential of extracellular algal toxins contaminating the RO product. Concentrations exceeding maximal values previously reported during natural blooms were used in the laboratory experiments, with treatments comprised of 50 μg/L of domoic acid (DA), 2 μg/L of saxitoxin (STX) and 20 μg/L of brevetoxin (PbTx). None of the algal toxins used in the bench-scale experiments were detectable in the desalinated product water. Monitoring for intracellular and extracellular concentrations of DA, STX, PbTx and okadaic acid (OA) within the intake and desalinated water from a pilot RO desalination plant in El Segundo, CA, was conducted from 2005 to 2009. During the five-year monitoring period, DA and STX were detected sporadically in the intake waters but never in the desalinated water. PbTx and OA were not detected in either the intake or desalinated water. The results of this study demonstrate the potential for HAB toxins to be inducted into coastal RO intake facilities, and the

  12. Algal toxins and reverse osmosis desalination operations: Laboratory bench testing and field monitoring of domoic acid, saxitoxin, brevetoxin and okadaic acid

    KAUST Repository

    Seubert, Erica L.

    2012-12-01

    The occurrence and intensity of harmful algal blooms (HABs) have been increasing globally during the past few decades. The impact of these events on seawater desalination facilities has become an important topic in recent years due to enhanced societal interest and reliance on this technology for augmenting world water supplies. A variety of harmful bloom-forming species of microalgae occur in southern California, as well as many other locations throughout the world, and several of these species are known to produce potent neurotoxins. These algal toxins can cause a myriad of human health issues, including death, when ingested via contaminated seafood. This study was designed to investigate the impact that algal toxin presence may have on both the intake and reverse osmosis (RO) desalination process; most importantly, whether or not the naturally occurring algal toxins can pass through the RO membrane and into the desalination product. Bench-scale RO experiments were conducted to explore the potential of extracellular algal toxins contaminating the RO product. Concentrations exceeding maximal values previously reported during natural blooms were used in the laboratory experiments, with treatments comprised of 50 μg/L of domoic acid (DA), 2 μg/L of saxitoxin (STX) and 20 μg/L of brevetoxin (PbTx). None of the algal toxins used in the bench-scale experiments were detectable in the desalinated product water. Monitoring for intracellular and extracellular concentrations of DA, STX, PbTx and okadaic acid (OA) within the intake and desalinated water from a pilot RO desalination plant in El Segundo, CA, was conducted from 2005 to 2009. During the five-year monitoring period, DA and STX were detected sporadically in the intake waters but never in the desalinated water. PbTx and OA were not detected in either the intake or desalinated water. The results of this study demonstrate the potential for HAB toxins to be inducted into coastal RO intake facilities, and the

  13. Desalination shocks in microstructures

    CERN Document Server

    Mani, Ali

    2011-01-01

    Salt transport in bulk electrolytes is limited by diffusion and convection, but in microstructures with charged surfaces (e.g. microfluidic devices, porous media, soils, or biological tissues) surface conduction and electro-osmotic flow also contribute to ionic fluxes. For small applied voltages, these effects lead to well known linear electrokinetic phenomena. In this paper, we predict some surprising nonlinear dynamics that can result from the competition between bulk and interfacial transport at higher voltages. When counter-ions are selectively removed by a membrane or electrode, a "desalination shock" can propagate through the microstructure, leaving in its wake an ultrapure solution, nearly devoid of co-ions and colloidal impurities. We elucidate the basic physics of desalination shocks and develop a mathematical theory of their existence, structure, and stability, allowing for slow variations in surface charge or channel geometry. Via asymptotic approximations and similarity solutions, we show that des...

  14. Advanced light water reactor plant

    Energy Technology Data Exchange (ETDEWEB)

    Giedraityte, Zivile [Helsinki University of Technology, Otaranta 8D-84, 02150 Espoo (Finland)

    2008-07-01

    For nuclear power to be competitive with the other methods of electrical power generation the economic performance should be significantly improved by increasing the time spent on line generating electricity relative to time spent off-line conducting maintenance and refueling. Maintenance includes planned actions (surveillances) and unplanned actions (corrective maintenance) to respond to component degradation or failure. A methodology is described which is used to resolve maintenance related operating cycle length barriers. Advanced light water nuclear power plant is designed with the purpose to maximize online generating time by increasing operating cycle length. (author)

  15. Temperature Response in Ultrasonic Sea Water Desalination%超声波作用下海水淡化温度响应

    Institute of Scientific and Technical Information of China (English)

    董华; 张凌云; 王晓

    2012-01-01

    为了寻求超声波雾化作用下蒸发的最适宜温度,对不同盐度情况下海水蒸发速率的温度响应进行试验研究;建立了超声波雾化作用下蒸发温度响应模型,分析了温度对超声波海水蒸发速率影响的微观机制.经过试验研究发现:超声波雾化作用下蒸发的最适宜温度为50-65℃;雾化过程中温度和蒸发速率呈很好的线性关系.超声波雾化过程中能够产生动量积聚,在超声波和表面张力波两者频率相近时激发共振,从而克服海水表面张力,加速水分子团簇雾化和蒸发.这一机制为海水淡化技术的研发提供了新的思路.%In order to probe the appropriate temperature for the evaporation of ultrasonic atomization, an experimental study about the temperature response to the sea water evaporation rate in different salinities is conducted. The response model of evaporation temperature of ultrasonic atomization is established and the micro-mechanism of the effect of temperature on the ultrasonic sea water evaporation rate analyzed. It suggests that the suitable temperature for evaporation of ultrasonic atomization is from 50℃ to 65℃ and has proved the linear relationship between the temperature and the evaporation rate in the progress of ultrasonic evaporation. When ultrasonic and sea water capillary wave are in the same frequency, there will be a resonance phenomenon. Ultrasonic atomization increased the speed and acceleration of water molecule on the surface of liquid drops. More water molecules have enough energy in overcoming the surface tension and the rate of water evaporation and atomization were accelerated. This mechanism provides a new idea for the development of sea water desalination.

  16. 利用淡化海水浓液制备碳酸镁晶须%Preparation of magnesium carbonate whisker using thick liquid of desalinated sea water

    Institute of Scientific and Technical Information of China (English)

    王恩雷; 张文军

    2011-01-01

    为了得到制备碳酸镁的最佳制备工艺参数,采用水热合成法,确定了利用淡化海水浓液制备碳酸镁晶须的最佳条件.研究结果表明:碳酸钠与处理过的海水浓液(主要是氯化镁)按摩尔比为1:1混合后溶液浓度为0.4 mol/L,反应温度50℃,反应时间为50 min时,搅拌速度120 r/min时,生成碳酸镁晶须最佳.该研究成果为资源综合利用及降低碳酸镁晶须制备成本具有一定的参考价值和指导意义.%In order to have the best process parameters for preparing magnesium carbonate whisker, this study has obtained the best conditions for preparing magnesium carbonate whisker from desalinated sea water using hydrothermal synthesis method. The study shows that the best conditions are as follows: a solution of sodium carbonate and sea water should have a mole ratio of 1:1; a concentration of 0.4 mol/L; react temperature at 50°C; react time in 50 minutes; and stirring rate of 120 r/min. This study has provided a useful reference and some guidance in comprehensive resource utilization and cost reduction in preparing magnesium carbonate whisker.

  17. Progress in Investigation and Application of High Recovery Brackish Water Membrane Desalination Technology%高回收率膜法苦咸水淡化工艺的应用研究进展

    Institute of Scientific and Technical Information of China (English)

    宋跃飞; 苏现伐; 周建国; 苏保卫; 高从堦

    2015-01-01

    膜法苦咸水淡化过程中,符合环境保护要求的浓排水处理方法成本高昂,所以只有当回收率达到较高值时,在实际运行中才具有经济可行性。目前,在不加剧膜污染的条件下进一步提高苦咸水淡化系统回收率的方法已成为该领域研究热点。本文详细综述了高回收率膜法苦咸水淡化工艺的应用研究进展,包括基于反渗透、纳滤、正渗透、膜蒸馏、电渗析和电容去离子化淡化工艺过程,以及这些过程面临的热点问题,并对此提出了建议。%The costs of environmentally responsible brine disposal methods at inland sites can be prohibitively expensive in membrane brackish water desalination processes. As a result, it is often economically infeasible to develop such ground water sources unless very high product water recovery is attained. High product water recovery in membrane desalination processes is often limited by scaling of sparingly soluble salts when the concentrate above the solubility limits in the highly concentrated brine. Therefore, attempt was currently made to solve or mitigate scaling of membrane for brackish water desalination while remaining or further increasing overall system product water recovery. In this paper, the progress in improving the recovery of brackish water desalination by membrane technology including reverse osmosis (RO), nanofiltration (NF), forward osmosis (FO), membrane distillation (MD), electrodialysis (ED) and capacitive deionization (CDI), the scaling problem therein, as well as critical issues existing in this region were presented and commented extensively. In addition, the problems and suggestions for the current research status are proposed.

  18. Numerical simulation of solar-assisted multi-effect distillation (SMED) desalination systems

    KAUST Repository

    Kim, Youngdeuk

    2013-01-01

    We present a simulation model for the transient behavior of solar-assisted seawater desalination plant that employs the evacuated-tube collectors in conjunction with a multieffect distillation plant of nominal water production capacity of 16m3/day. This configuration has been selected due to merits in terms of environment-friendliness and energy efficiency. The solar-assisted multi-effect distillation system comprises 849 m2 of evacuated-tube collectors, 280 m3 water storage tanks, auxiliary heater, and six effects and a condenser. The present analysis employs a baseline configuration, namely; (i) the local solar insolation input (Jeddah, Saudi Arabia), (ii) a coolant flow rate through the headers of collector based on ASHRAE standards, (iii) a heating water demand, and (iv) the augmentation of water temperature by auxiliary