WorldWideScience

Sample records for water bottles audit

  1. Bottled Water and Fluoride

    Science.gov (United States)

    ... bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, depending on ... How can I find out the level of fluoride in bottled water? The FDA does not require ...

  2. Energy implications of bottled water

    Science.gov (United States)

    Gleick, P. H.; Cooley, H. S.

    2009-01-01

    As bottled water use continues to expand around the world, there is growing interest in the environmental, economical, and social implications of that use, including concerns about waste generation, proper use of groundwater, hydrologic effects on local surface and groundwater, economic costs, and more. A key concern is how much energy is required to produce and use bottled water. This paper estimates the energy footprint required for various phases of bottled water production, transportation, and use. We do not develop a single comprehensive life-cycle energy estimate because of differences among water sources, bottling processes, transportation costs, and other factors, but we quantify key energy inputs necessary for site-specific assessments. We also apply these inputs to three site-specific examples of the energy required from production to the point of use: local bottled water produced and used in Los Angeles, water bottled in the South Pacific and shipped by cargo ship to Los Angeles, and water bottled in France and shipped in various ways to Los Angeles. For water transported short distances, the energy requirements of bottled water are dominated by the energy used to produce the plastic bottles. Long-distance transport, however, can lead to energy costs comparable to, or even larger than, those of producing the bottle. All other energy costs—for processing, bottling, sealing, labeling, and refrigeration—are far smaller than those for the production of the bottle and transportation. These data can be used to generate specific estimates for different sources, treatments, and delivery options.

  3. Radioactivity in French bottled waters

    Energy Technology Data Exchange (ETDEWEB)

    Loyen, J.; Brassac, A.; Augeray, C.; Fayolle, C.; Gleizes, M. [Institut de Radioprotection et de Surete Nucleaire - IRSN (France)

    2014-07-01

    As IRSN is considered as a reference laboratory for radioactivity measurements, French health ministry and French nuclear safety authority asked IRSN to carry out a study in order to get a fresh and complete status of radiological water quality of French bottled waters. The study was carried out during 12 months in 2012. A total of 142 bottled waters samples were analyzed (75 spring waters and 67 natural mineral waters). The laboratories of IRSN were in charge of: - systematic measurement of radioactivity following requirements of the French health ministry (Circulaire du 13/06/2007) regarding the monitoring and management of sanitary risk linked to the presence of radionuclides in drinking waters (natural mineral waters excepted). - systematic uranium mass concentration determination; - a few radon-222 gas measurements for waters in glass bottles. This study is a flash assessment of radiological characteristics of French bottled waters, at the analysis date for the sample received. It was done in informative way and was not done for regulatory control purposes.. This study has shown that: - all bottled waters analyzed have a tritium activity concentration lower than the quality reference value of 100 Bq/l of the French regulation; - More than 105 bottled waters analyzed (80% of the springs waters and 70% of natural mineral waters received) have a gross alpha activity concentration lower than the guideline value of 0,1 Bq/l of the French regulation; - All bottled waters analyzed have a residual gross beta activity concentration lower than the guideline value of 1 Bq/l of the French regulation; - All bottled waters analyzed have a uranium mass concentration lower than the provisory guideline value of 30 μg/l of the WHO for drinking waters; - radon-222 was only significantly measured once upon 6 glass bottled waters with a value far below the reference value of 100 Bq/l of the future European Directive on drinking waters. For 32 bottled waters with gross alpha

  4. 21 CFR 165.110 - Bottled water.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. (a) Identity—(1) Description. Bottled water is water that is intended for human consumption and that is sealed...

  5. Newspaper+Water Bottle=?

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>这是由日本每日新闻社于201 3年为让更多的日本年轻人发现纸质报纸的价值而展开的营销战役。每日新闻社将报纸与瓶装水结合在一起,形成"News Bottle",即将新闻报道作为瓶装水的标签。其目的是为了在纸质报纸销售量逐年递减的今天,让年轻人更多地接触报纸,激发他们对于纸质报纸的阅读兴趣。每日新闻社通过365天持续更新瓶装水的标签,使人们每天都能在瓶装水上读到最新热点和头条新闻,以此来吸引年轻人的注意力,建立起年轻人与《每日新闻》的互动,最终得到年轻人们的自愿持续关注。每日新闻社还利用AR技术,让人们能通过移动

  6. Newspaper+Water Bottle=?

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>这是由日本每日新闻社于2013年为让更多的日本年轻人发现纸质报纸的价值而展开的营销战役。每日新闻社将报纸与瓶装水结合在一起,形成"News Bottle",即将新闻报道作为瓶装水的标签。其目的是为了在纸质报纸销售量逐年递减的今天,让年轻人更多地接触报纸,激发他们对于纸质报纸的阅读兴趣。每日新闻社通过365天持续更新瓶装水的标签,使人们每天都能在瓶装水上读到最新热点和头条新闻,以此来吸引年轻人的注意力,建立起年轻人与《每日新闻》的互

  7. Qualitative Assessment Of Bottled Water In The Middle East

    OpenAIRE

    Ahmad, S.; Saleem, Abdul

    1996-01-01

    Many brands of bottled water are being produced in the Middle East including the Gulf Cooperation Council (GCC) countries. Over fourteen brands of bottled water could be found in the market of Doha. Use of bottled water has kept on increasing in this region. Reasons for the increase in use of bottled water for drinking have been discussed. The raw water source for the bottled water is groundwater. Most of the manufacturers of the bottled water claim bottled water as "Natural Mineral Water...

  8. Gas Property Demonstrations Using Plastic Water Bottles

    Science.gov (United States)

    Campbell, Dean J.; Bannon, Stephen J.; Gunter, Molly M.

    2011-01-01

    Plastic water bottles are convenient containers for demonstrations of gas properties illustrating Boyle's law, Charles's law, and Avogadro's law. The contents of iron-based disposable hand warmer packets can be used to remove oxygen gas from the air within an unfilled plastic water bottle.

  9. EXAMINATION OF BOTTLED WATER FOR NONTUBERCULOUS MYCOBACTERIA

    Science.gov (United States)

    The objective of this study was to examine bottled water for the presence of nontuberculous mycobacteria as a potential source of infection in AIDS patients. Twenty brands of bottled water commonly used in the Los Angeles area were tested for the presence of nontuberculous mycoba...

  10. Bottled Water Mania: Americas Misguided Infatuation with Bottled Water over Tap Water

    Science.gov (United States)

    2010-05-01

    to remove pathogens. There are no requirements for filtration of bottled water. Tap water must be tested for cryptosporidium, giardia, and viruses ...Plastic bottles in landfills can take hundreds of years to decompose, causing a profound environmental impact. The oceans are another victim of

  11. Helmholtz Resonance in a Water Bottle

    Directory of Open Access Journals (Sweden)

    Annirudh Balachandran

    2011-01-01

    Full Text Available The resonance that occurs when blowing across the top of a water bottle filled with different volumes of water was studied. It was shown that, contrary to popular belief, a water bottle is not an ideal Helmholtz resonator. Resonance in a water bottle with an extendable neck was then studied to determine how the length of the neck affects the resonance. The results showed that ideal Helmholtz resonance occurs when the neck length was in a middle range, while for no neck a standing wave resonance occurs. For a very long neck the results were inconclusive.

  12. Bottled water: United States consumers and their perceptions of water quality

    National Research Council Canada - National Science Library

    Hu, Zhihua; Morton, Lois Wright; Mahler, Robert L

    2011-01-01

    Consumption of bottled water is increasing worldwide. Prior research shows many consumers believe bottled water is convenient and has better taste than tap water, despite reports of a number of water quality incidents with bottled water...

  13. Safety of Bottled Water Beverages Including Flavored Water and Nutrient-Added Water Beverages

    Science.gov (United States)

    ... Association, bottled water was the second most popular beverage in the U.S. in 2005, with Americans consuming more than 7.5 million gallons of bottled water - an average of 26 gallons per person. Today, only carbonated soft drinks out-sell bottled water. Defining "Bottled ...

  14. Legionella pneumophila in commercial bottled mineral water.

    NARCIS (Netherlands)

    Klont, R.R.; Rijs, A.J.M.M.; Warris, A.; Sturm, P.D.J.; Melchers, W.J.G.; Verweij, P.E.

    2006-01-01

    Sixty-eight commercial bottled mineral waters (64 brands, 68 different 'best-before dates') were tested for the presence of bacteria and fungi. Six samples were Legionella antigen positive and six were Legionella pneumophila PCR positive. Two samples were both Legionella antigen and L. pneumophila P

  15. Bottled Water: United States Consumers and Their Perceptions of Water Quality

    OpenAIRE

    Mahler, Robert L.; Lois Wright Morton; Zhihua Hu

    2011-01-01

    Consumption of bottled water is increasing worldwide. Prior research shows many consumers believe bottled water is convenient and has better taste than tap water, despite reports of a number of water quality incidents with bottled water. The authors explore the demographic and social factors associated with bottled water users in the U.S. and the relationship between bottled water use and perceptions of the quality of local water supply. They find that U.S. consumers are more likely to report...

  16. Bottled Water: United States Consumers and Their Perceptions of Water Quality

    OpenAIRE

    Mahler, Robert L.; Lois Wright Morton; Zhihua Hu

    2011-01-01

    Consumption of bottled water is increasing worldwide. Prior research shows many consumers believe bottled water is convenient and has better taste than tap water, despite reports of a number of water quality incidents with bottled water. The authors explore the demographic and social factors associated with bottled water users in the U.S. and the relationship between bottled water use and perceptions of the quality of local water supply. They find that U.S. consumers are more likely to report...

  17. THE HISTORY OF BORSEC MINERAL WATER BOTTLING

    Directory of Open Access Journals (Sweden)

    G. B. TOFAN

    2014-06-01

    Full Text Available The History of Borsec Mineral Water Bottling. The mineral water springs of Borsec have been known to exist since ancient times. It started as a legend, presented by Orbán Balász, who mentions an author named Salzer. In his „Voyage Diaries in Transylvania”, Salzer recounts the discovery of healing springs in the area, and attributes it, like many other authors, to a Romanian shepherd called Gheorghe, who, suffering from ulcer, returning home one day, drank from one of the Borsec springs. Drinking the sour water, he felt better. Consequently, he remained there for a couple of days, drinking water from the same spot and curing his ailment. Written documents date back from the 16th century, when Bethlen Farkas, in the historical novel „Historia”, recounts that, in 1594, Sigismund Bathory, who resided in Alba Iulia, suffered from nervous exhaustion. His Italian doctor, Bucello, who knew about the curing effects of the Borsec mineral waters, prescribed a treatment using the water from the „Lobogó” spring. The water, transported to the princely estate in large covered barrels, eventually healed Sigismund Bathory. It is easy to see why, at the end of the 16th century, the mineral water of Borsec, with its miracle properties, was well known in Transylvania and at the imperial court of Vienna. The above mentioned spring, used from the 19th century onwards, for spas and for bottling, earned great renown, especially due to the high concentration of CO2 (over 2.5 g/l. The bottled sparkling water, due to its pleasant taste and its chemical stability, is the most sought after table water. This explains why, in most cases, the notion of mineral water is associated with „Borsec”.

  18. Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters.

    Science.gov (United States)

    Guart, Albert; Bono-Blay, Francisco; Borrell, Antonio; Lacorte, Silvia

    2014-08-01

    Bottled water is packaged in either glass or, to a large extent, in plastic bottles with metallic or plastic caps of different material, shape and colour. Plastic materials are made of one or more monomers and several additives that can eventually migrate into water, either during bottle manufacturing, water filling or storage. The main objective of the present study was to carry out a comprehensive assessment of the quality of the Spanish bottled water market in terms of (i) migration of plastic components or additives during bottling and during storage and (ii) evaluation of the effect of the packaging material and bottle format on the migration potential. The compounds investigated were 5 phthalates, diethylhexyl adipate, alkylphenols and bisphenol A. A set of 362 bottled water samples corresponding to 131 natural mineral waters and spring waters sources and 3 treated waters of several commercial brands were analysed immediately after bottling and after one-year storage (a total of 724 samples). Target compounds were detected in 5.6% of the data values, with diethyl hexyl phthalate and bisphenol A being the most ubiquitous compounds detected. The total daily intake was estimated and a comparison with reference values was indicated.

  19. Risk Perceptions of Arsenic in Tap Water and Consumption of Bottled Water

    OpenAIRE

    Jakus, Paul M.; Shaw, W. Douglass; Nguyen, To N.; Walker, Mark

    2009-01-01

    The demand for bottled water has increased rapidly over the past decade, but bottled water is extremely costly compared to tap water. The convenience of bottled water surely matters to consumers, but are others factors at work? This manuscript examines whether purchases of bottled water are associated with the perceived risk of tap water. All of the past studies on bottled water consumption have used simple scale measures of perceived risk that do not correspond to risk measures used by risk ...

  20. Health beliefs about bottled water: a qualitative study

    Directory of Open Access Journals (Sweden)

    Wernham Aaron GH

    2009-06-01

    Full Text Available Abstract Background There has been a consistent rise in bottled water consumption over the last decade. Little is known about the health beliefs held by the general public about bottled water as this issue is not addressed by the existing quantitative literature. The purpose of this study was to improve understanding of the public's health beliefs concerning bottled mineral water, and the extent to which these beliefs and other views they hold, influence drinking habits. Methods A qualitative study using semi-structured interviews, with 23 users of the Munrow Sports Centre on the University of Birmingham campus. Results Health beliefs about bottled water could be classified as general or specific beliefs. Most participants believed that bottled water conferred general health benefits but were unsure as to the nature of these. In terms of specific health beliefs, the idea that the minerals in bottled water conferred a health benefit was the most commonly cited. There were concerns over links between the plastic bottle itself and cancer. Participants believed that bottled water has a detrimental effect on the environment. Convenience, cost and taste were influential factors when making decisions as to whether to buy bottled water; health beliefs were unimportant motivating factors. Conclusion The majority of participants believed that bottled water has some health benefits. However, these beliefs played a minor role in determining bottled water consumption and are unlikely to be helpful in explaining recent trends in bottled water consumption if generalised to the UK population. The health beliefs elicited were supported by scientific evidence to varying extents. Most participants did not feel that bottled water conferred significant, if any, health benefits over tap water.

  1. 21 CFR 880.6085 - Hot/cold water bottle.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  2. Bottled Water: United States Consumers and Their Perceptions of Water Quality

    Directory of Open Access Journals (Sweden)

    Robert L. Mahler

    2011-02-01

    Full Text Available Consumption of bottled water is increasing worldwide. Prior research shows many consumers believe bottled water is convenient and has better taste than tap water, despite reports of a number of water quality incidents with bottled water. The authors explore the demographic and social factors associated with bottled water users in the U.S. and the relationship between bottled water use and perceptions of the quality of local water supply. They find that U.S. consumers are more likely to report bottled water as their primary drinking water source when they perceive that drinking water is not safe. Furthermore, those who give lower ratings to the quality of their ground water are more likely to regularly purchase bottle water for drinking and use bottle water as their primary drinking water source.

  3. 77 FR 25721 - Small Entity Compliance Guide: Bottled Water: Quality Standard: Establishing an Allowable Level...

    Science.gov (United States)

    2012-05-01

    ... HUMAN SERVICES Food and Drug Administration Small Entity Compliance Guide: Bottled Water: Quality... availability of a guidance for industry entitled ``Bottled Water: Quality Standard: Establishing an Allowable... its bottled water standard of quality regulations by establishing an allowable level for...

  4. Filling or draining a water bottle with two holes

    Science.gov (United States)

    Cross, Rod

    2016-07-01

    Three simple experiments are described using a small water bottle with two holes in the side of the bottle. The main challenge is to predict and then explain the observations, but the arrangements can also be used for quantitative measurements concerning hydrostatic pressure, Bernoulli’s equation, surface tension and bubble formation.

  5. Quality assessment of Romanian bottled mineral water and tap water.

    Science.gov (United States)

    M Carstea, Elfrida; Levei, Erika A; Hoaghia, Maria-Alexandra; Savastru, Roxana

    2016-09-01

    This study reports the evaluation of bottled mineral water characteristics using fluorescence spectroscopy (synchronous fluorescence scans and emission spectra) and physico-chemical analyses. Samples from 14 still mineral water brands were compared to 11 tap waters collected from two Romanian cities. Correlation and factor analyses were undertaken to understand the relationships between the individual components. The concentration of major and minor ions showed great variation between the bottled mineral water samples highlighting the diversity of the water intakes, while in the case of tap water the chemical composition was relatively similar for samples collected in the same city. Fluorescence data showed that the mineral water contained low quantities of organic matter. The humic fraction was dominant in all samples, while the microbial fraction was low in most samples. Synchronous fluorescence scans provided more information, regarding the composition of organic matter, compared to emission spectra. The study evidenced the correlation between fluorescence parameters and major elements and highlighted the potential of using fluorescence for qualitative evaluation of the bottled mineral water quality, as a screening method before undertaking complex analyses.

  6. Assessment of Drinking Water Quality from Bottled Water Coolers.

    Directory of Open Access Journals (Sweden)

    Marzieh Farhadkhani

    2014-05-01

    Full Text Available Drinking water quality can be deteriorated by microbial and toxic chemicals during transport, storage and handling before using by the consumer. This study was conducted to evaluate the microbial and physicochemical quality of drinking water from bottled water coolers.A total of 64 water samples, over a 5-month period in 2012-2013, were collected from free standing bottled water coolers and water taps in Isfahan. Water samples were analyzed for heterotrophic plate count (HPC, temperature, pH, residual chlorine, turbidity, electrical conductivity (EC and total organic carbon (TOC. Identification of predominant bacteria was also performed by sequence analysis of 16S rDNA.The mean HPC of water coolers was determined at 38864 CFU/ml which exceeded the acceptable level for drinking water in 62% of analyzed samples. The HPC from the water coolers was also found to be significantly (P < 0.05 higher than that of the tap waters. The statistical analysis showed no significant difference between the values of pH, EC, turbidity and TOC in water coolers and tap waters. According to sequence analysis eleven species of bacteria were identified.A high HPC is indicative of microbial water quality deterioration in water coolers. The presence of some opportunistic pathogens in water coolers, furthermore, is a concern from a public health point of view. The results highlight the importance of a periodic disinfection procedure and monitoring system for water coolers in order to keep the level of microbial contamination under control.

  7. Radium activity measurements in bottled mineral water

    Energy Technology Data Exchange (ETDEWEB)

    Kappke, Jaqueline; Paschuk, Sergei A.; Correa, Janine N.; Denyak, Valeriy; Reque, Marilson, E-mail: sergei@utfpr.edu.br [Universidade Tecnologica Federal do Parana, Curitiba, PR (Brazil); Rocha, Paschuk; Rocha, Zildete; Santos, Talita O., E-mail: rochaz@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    This work presents the preliminary results of {sup 226}Ra activity measurements of fifteen samples of bottled mineral water acquired at markets of Curitiba-PR, Brazil. The measurements were performed at the Laboratory of Applied Nuclear Physics of the Federal University of Technology - Parana (UTFPR) in collaboration with the Center of Nuclear Technology Development of Brazilian Nuclear Energy Committee (CNEN). The experimental setup was based on the electronic radon detector RAD7 (Durridge Company, Inc.). The measurements were carried out with a special kit of accessory vessels (vials) RAD7 H{sub 2}O, which allows one to identify the {sup 222}Rn activity concentration in small water samples of 40 mL and 250 mL in the range going from less than 30 pCi/L to greater than 10{sup 5} pCi/L. During each measurement a vial from RAD H{sub 2}O was poured with a sample of water. The air pump, included in the close loop aeration circuit and connected to the vial and RAD7 detector, operated for five minutes to snatch the sample of air maintained above the level of water sample and transporting it from the vial through the system. Evaluation of the concentration of soluble radium ({sup 226}Ra) salts in water and their activity was performed after 30 days when {sup 222}Rn in the water samples reached secular equilibrium. The background measurements were performed using the samples of the distilled water. Considering the importance of background measurements, it was found that the value suggested by user Manual protocol (RAD7) for the case of low activity radon measurements, has to be slightly modified. (author)

  8. Physical, chemical and microbial analysis of bottled drinking water.

    Science.gov (United States)

    Sasikaran, S; Sritharan, K; Balakumar, S; Arasaratnam, V

    2012-09-01

    People rely on the quality of the bottled drinking water, expecting it to be free of microbial contamination and health hazards. To evaluate the quality of bottled drinking water sold in Jaffna peninsula by analysing the physical, chemical and microbial contents and comparing with the recommended Sri Lankan Standard (SLS) values. All bottled water samples sold in Jaffna peninsula were collected. Electrical conductivity, total dissolved solid, pH, calcium, nitrate, total aerobic and anaerobic count, coliform bacterial count and faecal contamination were checked. These are 22 brands of bottled drinking water sold in Jaffna peninsula. The sample had very low electrical conductivity when compared with SLS (750 μS/ cm) and varied from 19 to 253 μS/cm with the mean of 80.53 (±60.92) μS/cm. The pH values of the bottled drinking water brands varied from 4.11 to 7.58 with a mean of 6.2 (±0.75). The total dissolved solid content of the bottled drinking water brands varied from 9 to 123.67 mg/l with a mean of 39.5 (±30.23) mg/l. The calcium content of the bottled drinking water brands varied from 6.48 to 83.77 mg/l with a mean of 49.9 (±25.09) mg/l. The nitrate content of the bottled drinking water brands varied from 0.21 to 4.19 mg/l with the mean of 1.26 (±1.08) mg/l. Aerobic bacterial count varied from 0 to 800 colony forming unit per ml (cfu/ml) with a mean of 262.6 (±327.50) cfu/ml. Among the 22 drinking bottled water brands 14 and 9% of bottled drinking water brands showed fungal and coliform bacterial contaminants respectively. The water brands which contained faecal contamination had either Escherichia coli or Klebsiella spp. The bottled drinking water available for sale do not meet the standards stipulated by SLS.

  9. Rare earth elements in some bottled waters of Serbia

    Directory of Open Access Journals (Sweden)

    Todorović Maja

    2013-01-01

    Full Text Available Twenty-one bottled mineral and spring waters from Serbia were analyzed for 16 inorganic chemical parameters, including lanthanides and yttrium which belong to the group of so-called rare earth elements (REE. REE concentrations in the bottled water samples varied over a broad range, from 5.39 to 1585.82 ng/L. Total concentrations in the bottled water samples were calculated taking into account the classification of lanthanides into heavy (HREE and light (LREE, with yttrium added to the HREE group. The LREE concentrations ranged from 3.62 to 1449.63 ng/L, while those of the HREE were from 0 to 136.19 ng/L. Distinct REE signatures were observed in waters that drained specific rocks. The REE patterns in groundwater from granitic and related rocks showed LREE and HREE enrichment, while groundwater with mafic rock influence exhibited slightly LREE enrichment. Several bottled water samples featured naturally-occurring carbon dioxide, whose solutional capacity contributed to the highest REE concentrations in the analyzed samples. High REE concentrations are also a result of sudden changes in oxidation-reduction conditions, which particularly affect La, Ce and Eu. Aquifers developed in granitic and related rocks (methamorphic and sedimentary rocks constitute favorable environments for HREE in groundwater, corroborated by the occurrence of HREE in bottled water samples. The bottled water samples largely exhibited a negative cerium anomaly and nearly all the samples showed a positive europium anomaly.

  10. Potential health impacts of consuming desalinated bottled water.

    Science.gov (United States)

    Rowell, Candace; Kuiper, Nora; Shomar, Basem

    2015-06-01

    This study compared physicochemical properties, anion and carbon content and major and trace elements in desalinated and non-desalinated bottled water available in Qatar, and assessed the potential health risks associated with prolonged consumption of desalinated water. Results indicate that Qatar's population is not at elevated risk of dietary exposure to As (mean = 666 ng/L), Ba (48.0 μg/L), Be (9.27 ng/L), Cd (20.1 ng/L), Cr (874 ng/L), Pb (258 ng/L), Sb (475 ng/L) and U (533 ng/L) from consumption of both desalinated and non-desalinated bottled water types available in the country. Consumers who primarily consume desalinated water brands further minimize risk of exposure to heavy metals as levels were significantly lower than in non-desalinated bottled water. Desalinated bottled water was not a significant contributor to recommended daily intakes for Ca, Mg and F(-) for adults and children and may increase risk of deficiencies. Desalinated bottled water accounted for only 3% of the Institute of Medicine (IOM) adequate intake (AI) for Ca, 5-6% of the recommended daily allowance for Mg and 4% of the AI for F among adults. For children desalinated water contributed 2-3% of the IOM AICa, 3-10% of the RDA(Mg) and 3-9% of the AIF.

  11. Risk Factors Associated with the Choice to Drink Bottled Water and Tap Water in Rural Saskatchewan

    OpenAIRE

    McLeod, Lianne; Bharadwaj, Lalita; Waldner, Cheryl

    2014-01-01

    0.001) or living in the area for £10 years (p = 0.01) were more likely to choose bottled water. Those who reported tap water was not safe to drink were more likely to choose bottled water, an effect greater for those who had no aesthetic complaints (p ≤ 0.001), while those with aesthetic complaints were more likely to choose bottled water if they believed the water was safe (p <

  12. Perceptions of bottled water consumers in three Brazilian municipalities.

    Science.gov (United States)

    de Queiroz, Josiane T Matos; Doria, Miguel de França; Rosenberg, Mark W; Heller, Léo; Zhouri, Andréa

    2013-09-01

    This study presents perceptions of consumers of bottled water in their households in three Brazilian municipalities. Data from interviews were analyzed using the Discourse Collective Subject method. Interviewees spent, on average, the equivalent of 40% of their water bill for the public water supply on the purchase of bottled water. The decision about water consumption in the household was predominantly made by women. Interviewees were particularly concerned with health risks and expressed a strong preference for the safety and organoleptic qualities of bottled water, particularly in cases where the tap water supply did not fully meet the regulated water quality standards. Interviewees were largely unaware of the origin, type, storage, and social and environmental impacts of bottled water. Results highlight the importance of water education efforts among the general population and the key role of women in the processes related to drinking water. The need for gender-specific interventions and the empowerment of women on water issues is noted. Results also strongly support the relevance of ensuring the provision of safe drinking water, from the source to the consumption point, with the trust of consumers.

  13. Organochlorine pesticides residues in bottled drinking water from Mexico City.

    Science.gov (United States)

    Díaz, Gilberto; Ortiz, Rutilio; Schettino, Beatriz; Vega, Salvador; Gutiérrez, Rey

    2009-06-01

    This work describes concentrations of organochlorine pesticides in bottled drinking water (BDW) in Mexico City. The results of 36 samples (1.5 and 19 L presentations, 18 samples, respectively) showed the presence of seven pesticides (HCH isomers, heptachlor, aldrin, and p,p'-DDE) in bottled water compared with the drinking water standards set by NOM-127-SSA1-1994, EPA, and World Health Organization. The concentrations of the majority of organochlorine pesticides were within drinking water standards (0.01 ng/mL) except for beta-HCH of BW 3, 5, and 6 samples with values of 0.121, 0.136, and 0.192 ng/mL, respectively. It is important monitoring drinking bottled water for protecting human health.

  14. 40 CFR 141.101 - Use of bottled water.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Use of bottled water. 141.101 Section 141.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Use of Non-Centralized Treatment Devices §...

  15. A survey of the radiological quality of Mexican bottled waters

    Energy Technology Data Exchange (ETDEWEB)

    Lopez del R, H.; Davila R, J. I.; Rosales H, M. A.; Mireles G, F.; Pinedo V, J. L., E-mail: hlopezdelrio@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas (Mexico)

    2013-10-15

    More bottled drinking water is consumed per capita in Mexico than in any other country in the world. With the purpose of verifying the compliance with Mexican standards for radioactive content of drinking water, the gross alpha and beta activities were measured in 34 brands of bottled water consisting of purified water (19), natural mineral water (12), and mineralized water (3). Electrical conductivity of water samples ranged from 10 to 1465 μS/cm, and mostly high values were for the mineralized water samples. Gross alpha activities ranged from <12.2 to 709.8 mBq/L, while gross beta activities values varied from <26 to 616 mBq/L. All the bottled water samples had radioactivity content below the maximum permissible levels established in the Official Mexican Norm, except for the gross alpha level of one natural mineral water. Based upon these results it can be concluded that, in general, the analyzed bottled waters have acceptable quality with regard to radioactive content of gross alpha and beta activities. (Author)

  16. Cholera in Portugal, 1974. II. Transmission by bottled mineral water.

    Science.gov (United States)

    Blake, P A; Rosenberg, M L; Florencia, J; Costa, J B; do Prado Quintino, L; Gangarosa, E J

    1977-04-01

    During a cholera epidemic, Vibrio cholerae was isolated from two springs which supplied mineral water to a spa and to a commercial water bottling plant. Epidemiologic investigation found that cholera attack rates were 10-fold greater among visitors to the spa than among non-visitors. A subsequent matched-pair case-control study which excluded persons who had visted the spa showed that a history of consumption of the bottled non-carbonated water was significantly more common among bacteriologically confirmed cholera cases than among paired controls.

  17. Photocatalytic Coats in Glass Drinking-Water Bottles

    Science.gov (United States)

    Andren, Anders W.; Armstrong, David E.; Anderson, Marc A.

    2005-01-01

    According to a proposal, the insides of glass bottles used to store drinking water would be coated with films consisting of or containing TiO2. In the presence of ultraviolet light, these films would help to remove bacteria, viruses, and trace organic contaminants from the water.

  18. Fluoride Content of Bottled Drinking Waters in Qatar.

    Science.gov (United States)

    Almulla, Hessa Ibrahim; King, Nigel M; Alnsour, Hamza Mohammad; Sajnani, Anand K

    2016-12-01

    Fluoridation of drinking water has been recognized as one of the most effective ways of achieving community-wide exposure to the caries prevention effects of fluoride (F). A vast majority of people in Qatar use bottled water for drinking. Use of bottled water without knowing the F level may expose children to dental caries risk if the F level is lower than optimal or to dental fluorosis if the F level is too high. The aim of this study was to determine the F concentration of bottled water available in Qatar. A total of 32 brands of bottled water were evaluated. The F concentrations displayed on the labels were recorded. The F ion-selective electrode method was used to measure the F concentration in water samples, and three measurements were taken for every sample to ensure reproducibility. The p value was set at 0.05. The F concentration ranged from 0.06 to 3.0 ppm with a mean value of 0.8 ppm (±0.88). The F levels were provided by the manufacturers on the labels of 60 % of the samples, but this was significantly lower than the measured F levels (p water that was produced in Saudi Arabia had significantly higher levels of F when compared to those produced in other countries (p water. Furthermore, there was a significant disparity between the F levels which were measured and those that were provided on the labels.

  19. Bacteriological quality of bottled drinking water versus municipal tap water in Dharan municipality, Nepal.

    Science.gov (United States)

    Pant, Narayan Dutt; Poudyal, Nimesh; Bhattacharya, Shyamal Kumar

    2016-06-07

    Water-related diseases are of great concern in developing countries like Nepal. Every year, there are countless morbidity and mortality due to the consumption of unsafe drinking water. Recently, there have been increased uses of bottled drinking water in an assumption that the bottled water is safer than the tap water and its use will help to protect from water-related diseases. So, the main objective of this study was to analyze the bacteriological quality of bottled drinking water and that of municipal tap water. A total of 100 samples (76 tap water and 24 bottled water) were analyzed for bacteriological quality and pH. The methods used were spread plate method for total plate count (TPC) and membrane filter method for total coliform count (TCC), fecal coliform count (FCC), and fecal streptococcal count (FSC). pH meter was used for measuring pH. One hundred percent of the tap water samples and 87.5 % of the bottled water samples were found to be contaminated with heterotrophic bacteria. Of the tap water samples, 55.3 % were positive for total coliforms, compared with 25 % of the bottled water. No bottled water samples were positive for fecal coliforms and fecal streptococci, in contrast to 21.1 % and 14.5 % of the tap water samples being contaminated with fecal coliforms and fecal streptococci, respectively. One hundred percent of the tap water samples and 54.2 % of the bottled water samples had pH in the acceptable range. All of the municipal tap water samples and most of the bottled drinking water samples distributed in Dharan municipality were found to be contaminated with one or more than one type of indicator organisms. On the basis of our findings, we may conclude that comparatively, the bottled drinking water may have been safer (than tap water) to drink.

  20. Bottled water, spas, and early years of water chemistry

    Science.gov (United States)

    Back, William; Landa, Edward R.; Meeks, Lisa

    1995-01-01

    Although hot springs have been used and enjoyed for thousands of years, it was not until the late 1700s that they changed the course of world civilization by being the motivation for development of the science of chemistry. The pioneers of chemistry such as Priestley, Cavendish, Lavoisier, and Henry were working to identify and generate gases, in part, to determine their role in carbonated beverages. In the 18th century, spas in America were developed to follow the traditional activities of popular European spas. However, they were to become a dominant political and economic force in American history on three major points: (1) By far the most important was to provide a place for the leaders of individual colonies to meet and discuss the need for separation from England and the necessity for the Revolutionary War; (2) the westward expansion of the United States was facilitated by the presence of hot springs in many locations that provided the economic justification for railroads and settlement; and (3) the desire for the preservation of hot springs led to the establishment of the National Park Service. Although mineral springs have maintained their therapeutic credibility in many parts of the world, they have not done so in the United States. We suggest that the American decline was prompted by: (1) the establishment of The Johns Hopkins School of Medicine in 1893; (2) enactment of the Pure Food and Drug Act of 1907; and (3) the remarkable achievement of providing safe water supplies for American cities by the end of the 1920s. The current expanding market for bottled water is based in part on bottled water being an alternative beverage Ito alcohol and sweetened drinks and the inconsistent palatability and perceived health hazards of some tap waters.

  1. Stable isotopic composition of bottled mineral waters from Romania

    Science.gov (United States)

    Bădăluţă, Carmen; Nagavciuc, Viorica; Perșoiu, Aurel

    2015-04-01

    Romania has a high potential of mineral waters resources, featuring one of the largest mineral resources at European and global level. In the last decade, due to increased in consumption of bottled water, numerous brands have appeared on the market, with equally numerous and variable sources of provenance. In this study we have analyzed the isotopic composition of bottled mineral waters from Romania in order to determine their source and authenticity. We have analysed 32 carbonated and 24 non-carbonated mineral waters from Romania. and the results were analysed in comparison with stable isotope data from precipitation and river waters. Generally, the isotopic values of the mineral waters follow those in precipitation; however, differences occur in former volcanic regions (due to deep circulation of meteoric waters and increased exchange with host rock and volcanic CO2), as well as in mountainous regions, where high-altitude recharge occurs.

  2. Fluoride and bacterial content of bottled drinking water versus municipal tap water

    Directory of Open Access Journals (Sweden)

    Mythri H

    2010-01-01

    Full Text Available Background: Water is a divine gift. People quench their thirst without questioning the source of water. But, apprehension about contaminants in municipal water supplies along with increased fear of fluorosis made bottled drinking water as one of the important tradable commodities. Objectives: The objectives of the study were to determine and compare the fluoride and bacterial contents of commercially available bottled drinking water and municipal tap water in Davangere city, Karnataka. Materials and Methods: Fifty samples of 10 categories of bottled drinking water with different batch numbers were purchased and municipal water from different sources were collected. Fluoride levels were determined by an ion-selective electrode. Water was cultured quantitatively and levels of bacteria were calculated as colony-forming units (CFUs per milliliter. Results: Descriptive analysis of water samples for fluoride concentration was in the range of 0.07-0.33 for bottled drinking water, Bisleri showing the highest of 0.33. A comparison of the mean values of microbial count for bottled drinking water with that of municipal tap water showed no statistically significant difference, but was more than the standard levels along with the presence of fungus and maggots. Conclusion: The fluoride concentration was below the optimal level for both municipal tap water and bottled drinking water. CFUs were more than the recommended level in both municipal tap water and bottled drinking water.

  3. 75 FR 16363 - Beverages: Bottled Water; Reopening of the Comment Period

    Science.gov (United States)

    2010-04-01

    ...: Bottled Water; Reopening of the Comment Period AGENCY: Food and Drug Administration, HHS. ACTION: Proposed... 4, 1993 (58 FR 41612), amending the quality standard for bottled water (currently in 21 CFR 165.110(b)). In the 1993 proposed rule, FDA proposed to revise the bottled water quality standard...

  4. Community Responses to the Removal of Bottled Water on a University Campus

    Science.gov (United States)

    Mikhailovich, Katja; Fitzgerald, Robert

    2014-01-01

    Purpose: This paper aimed to examine the impact of the removal of bottled water on the campus community. This paper presents the findings of a survey conducted at the first Australian university to remove single-use bottled water from sale on a small regional university campus. The removal of bottled water from sale at the university formed part…

  5. What's Wrong with the Tap? Examining Perceptions of Tap Water and Bottled Water at Purdue University

    Science.gov (United States)

    Saylor, Amber; Prokopy, Linda Stalker; Amberg, Shannon

    2011-09-01

    The environmental impacts of bottled water prompted us to explore drinking water choices at Purdue University, located in West Lafayette, IN. A random sample of 2,045 Purdue University students, staff, and faculty was invited to participate in an online survey. The survey assessed current behaviors as well as perceived barriers and benefits to drinking tap water versus bottled water. 677 surveys were completed for a response rate of 33.1%. We then conducted qualitative interviews with a purposive sample of university undergraduates ( n = 21) to obtain contextual insights into the survey results and the beliefs of individuals with a variety of drinking water preferences. This study revealed that women drink disproportionately more bottled water then men while undergraduate students drink more than graduate students, staff and faculty. The study also uncovered a widespread belief that recycling eliminates the environmental impacts of bottled water. Important barriers to drinking tap water at Purdue include: perceived risks from tap water and the perceived safety of bottled water, preferring the taste of bottled water, and the convenience of drinking bottled water. The qualitative interviews revealed that drinking water choices can be influenced by several factors—especially whether individuals trust tap water to be clean—but involve varying levels of complexity. The implications of these results for social marketing strategies to promote tap water are discussed.

  6. What's wrong with the tap? Examining perceptions of tap water and bottled water at Purdue University.

    Science.gov (United States)

    Saylor, Amber; Prokopy, Linda Stalker; Amberg, Shannon

    2011-09-01

    The environmental impacts of bottled water prompted us to explore drinking water choices at Purdue University, located in West Lafayette, IN. A random sample of 2,045 Purdue University students, staff, and faculty was invited to participate in an online survey. The survey assessed current behaviors as well as perceived barriers and benefits to drinking tap water versus bottled water. 677 surveys were completed for a response rate of 33.1%. We then conducted qualitative interviews with a purposive sample of university undergraduates (n = 21) to obtain contextual insights into the survey results and the beliefs of individuals with a variety of drinking water preferences. This study revealed that women drink disproportionately more bottled water then men while undergraduate students drink more than graduate students, staff and faculty. The study also uncovered a widespread belief that recycling eliminates the environmental impacts of bottled water. Important barriers to drinking tap water at Purdue include: perceived risks from tap water and the perceived safety of bottled water, preferring the taste of bottled water, and the convenience of drinking bottled water. The qualitative interviews revealed that drinking water choices can be influenced by several factors-especially whether individuals trust tap water to be clean-but involve varying levels of complexity. The implications of these results for social marketing strategies to promote tap water are discussed.

  7. Phase II Audit Report - Energy & Water Audits of LLNL Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Horst, B I; Jacobs, P C; Pierce, S M

    2005-08-03

    This report describes Phase II of a project conducted for the Mechanical Utilities Division (UTel), Energy Management Program at Lawrence Livermore National Laboratory (LLNL) by Architectural Energy Corporation (AEC). The overall project covers energy efficiency and water conservation auditing services for 215 modular and prefabricated buildings at LLNL. The primary goal of this project is to demonstrate compliance with DOE Order 430.2A, Contractor Requirements Document section 2.d (2) Document, to demonstrate annual progress of at least 10 percent toward completing energy and water audits of all facilities. Although this project covers numerous buildings, they are all similar in design and use. The approach employed for completing audits for these facilities involves a ''model-similar building'' approach. In the model-similar building approach, similarities between groups of buildings are established and quantified. A model (or test case) building is selected and analyzed for each model-similar group using a detailed DOE-2 simulation. The results are extended to the group of similar buildings based on careful application of quantified similarities, or ''extension measures''. This approach leverages the relatively minor effort required to evaluate one building in some detail to a much larger population of similar buildings. The facility wide energy savings potential was calculated for a select set of measures that have reasonable payback based on the detailed building analysis and are otherwise desirable to the LLNL facilities staff. The selected measures are: (1) HVAC Tune-up. This is considered to be a ''core measure'', based on the energy savings opportunity and the impact on thermal comfort. All HVAC units in the study are assumed to be tuned up under this measure. See the Appendix for a detailed calculation by building and HVAC unit. (2) HVAC system scheduling. This is also considered to be a &apos

  8. Analysis of physical and chemical parameters of bottled drinking water.

    Science.gov (United States)

    Mahajan, Rakesh Kumar; Walia, T P S; Lark, B S; Sumanjit

    2006-04-01

    Seventeen different brands of bottled drinking water, collected from different retail shops in Amritsar, were analyzed for different physical and chemical parameters to ascertain their compliability with the prescribed/recommended limits of the World Heath Organization (WHO) and the United States Environmental Protection Agency (USEPA). It was found that the majority of the brands tested were over-treated. Lower values of hardness, total dissolved solids (TDS) and conductance than the prescribed limits of WHO showed that water was deficient in essential minerals. Minerals like magnesium, potassium, calcium and fluoride were present in some cases in such a low concentration that water seemed to be as good as distilled water. Samples showing fluoride lesser than 0.5 mg/l warranted additional sources of fluoride for the people consuming only bottled water for drinking purposes. Zero values for chlorine demand as shown by all the bottled water samples showed that water samples were safe from micro-organisms. In case of heavy metals, only lead had been found to be greater than the limit of 0.015 mg/l as prescribed by WHO and USEPA, in seven out of 17 samples. Lead even at such a low concentration can pose a great health hazard.

  9. Risk Factors Associated with the Choice to Drink Bottled Water and Tap Water in Rural Saskatchewan

    Directory of Open Access Journals (Sweden)

    Lianne McLeod

    2014-01-01

    Full Text Available A cross-sectional study investigated risk factors associated with choices to drink bottled water and tap water in rural Saskatchewan. Of 7,500 anonymous postal questionnaires mailed out, 2,065 responses were analyzed using generalized linear mixed models. Those who reported a water advisory (p < 0.001 or living in the area for £10 years (p = 0.01 were more likely to choose bottled water. Those who reported tap water was not safe to drink were more likely to choose bottled water, an effect greater for those who had no aesthetic complaints (p ≤ 0.001, while those with aesthetic complaints were more likely to choose bottled water if they believed the water was safe (p < 0.001. Respondents who treated their water and did not use a community supply were more likely to choose bottled water (p < 0.001, while those who did not treat their water were more likely to choose bottled water regardless of whether a community supply was used (p < 0.001. A similar pattern of risk factors was associated with a decreased likelihood of consuming tap water daily; however, the use of a community water supply was not significant. Understanding the factors involved in drinking water choices could inform public health education efforts regarding water management in rural areas.

  10. Risk factors associated with the choice to drink bottled water and tap water in rural Saskatchewan.

    Science.gov (United States)

    McLeod, Lianne; Bharadwaj, Lalita; Waldner, Cheryl

    2014-01-30

    A cross-sectional study investigated risk factors associated with choices to drink bottled water and tap water in rural Saskatchewan. Of 7,500 anonymous postal questionnaires mailed out, 2,065 responses were analyzed using generalized linear mixed models. Those who reported a water advisory (p bottled water. Those who reported tap water was not safe to drink were more likely to choose bottled water, an effect greater for those who had no aesthetic complaints (p ≤ 0.001), while those with aesthetic complaints were more likely to choose bottled water if they believed the water was safe (p water and did not use a community supply were more likely to choose bottled water (p water were more likely to choose bottled water regardless of whether a community supply was used (p water daily; however, the use of a community water supply was not significant. Understanding the factors involved in drinking water choices could inform public health education efforts regarding water management in rural areas.

  11. Tap or bottled water: drinking preferences among urban minority children and adolescents.

    Science.gov (United States)

    Huerta-Saenz, Lina; Irigoyen, Matilde; Benavides, Jorge; Mendoza, Maria

    2012-02-01

    The last decade has seen an increasing trend in consumer preference of bottled water over tap water. Little is known what type of water children and adolescents prefer for drinking and what their parents think of their community tap water. The study objective was to assess drinking water preferences, perceptions of the qualities of tap water and bottled water, and fluoride knowledge in an urban pediatric population. We conducted an anonymous survey of a convenience sample of caretakers of children and adolescents at an urban clinic regarding their preferences for tap or bottled water, their perceptions of the quality of tap and bottled water and their knowledge of fluoride. Of the 208 participants (79% African American, 9% Latino), 59% drank tap water, 80% bottled water. Only 17% drank tap water exclusively, 38% drank bottled water exclusively, 42% drank both. We found no significant differences in water preferences across age groups, from infancy to adulthood, or among ethnic groups. Ratings for taste, clarity, purity and safety were significantly higher for bottled water than tap water (P water. We conclude bottled water was preferred over tap water in an urban minority pediatric population. Perceptions of the qualities of water seemed to drive drinking preferences. Public health strategies are needed to increase public awareness of the impact of bottled water consumption on oral health, household budgets and the environment.

  12. Quality comparison of tap water vs. bottled water in the industrial city of Yanbu (Saudi Arabia).

    Science.gov (United States)

    Ahmad, Maqbool; Bajahlan, Ahmad S

    2009-12-01

    This study was conducted to compare the quality of bottled water with potabilized desalinated tap water. Fourteen brands of local and imported bottled water samples were collected from the local market and analyzed for physicochemical parameters in the Royal Commission Environmental Laboratory. Results were compared with 5-year continuous monitoring data of tap water from different locations in Madinat Yanbu Al-Sinaiyah (MYAS) including storage tanks of desalination plant. Results show that there was no significant difference in the quality of tap water and bottled water. Bacteriological test was never found positive in the 5-year data in tap water. Similarly, physicochemical analysis shows the persistent quality of tap water. Based on hardness analysis, bottled and tap water are categorized as soft water. Trihalomethanes (THMs) study also indicates that traces of disinfection by products (DBPs) are present in both tap and bottled water and are much less than the World Health Organization and Environmental Protection Agency maximum permissible limits. It is also important to note that the tap water distribution network in MAYS is a high-pressure recirculation network and there is no chance to grow bacteria in stagnant water in pipe lines or houses. Recently, the Royal Commission has replaced the whole drinking water network, which was made of asbestos-cemented pipes with glass-reinforced plastic (GRP) pipes, to avoid any asbestos contaminations. Based on these results, it is concluded that drinking water distributed in the city is of very good and persistent quality, comparable with bottled water. Continuous monitoring also guarantees the safe drinking water to the community. Hence, it is the responsibility of the Royal Commission to encourage the peoples in the city to drink tap water as it is as good as bottled water even better than some of the brands and is monitored regularly. It is also much cheaper compared to bottled water and is available round the clock

  13. Stable hydrogen and oxygen isotope ratios of bottled waters of the world.

    Science.gov (United States)

    Bowen, Gabriel J; Winter, David A; Spero, Howard J; Zierenberg, Robert A; Reeder, Mathew D; Cerling, Thure E; Ehleringer, James R

    2005-01-01

    Bottled and packaged waters are an increasingly significant component of the human diet. These products are regulated at the regional, national, and international levels, and determining the authenticity of marketing and labeling claims represents a challenge to regulatory agencies. Here, we present a dataset of stable isotope ratios for bottled waters sampled worldwide, and consider potential applications of such data for regulatory, forensic and geochemical standardization applications. The hydrogen and oxygen isotope ratios of 234 samples of bottled water range from -147 per thousand to +15 per thousand and from -19.1 per thousand to +3.0 per thousand, respectively. These values fall within and span most of the normal range for meteoric waters, indicating that these commercially available products represent a source of waters for use as laboratory working standards in applications requiring standardization over a large range of isotope ratios. The measured values of bottled water samples cluster along the global meteoric water line, suggesting that bottled water isotope ratios preserve information about the water sources from which they were derived. Using the dataset, we demonstrate how bottled water isotope ratios provide evidence for substantial evaporative enrichment of water sources prior to bottling and for the marketing of waters derived from mountain and lowland sources under the same name. Comparison of bottled water isotope ratios with natural environmental water isotope ratios demonstrates that on average the isotopic composition of bottled water tends to be similar to the composition of naturally available local water sources, suggesting that in many cases bottled water need not be considered as an isotopically distinct component of the human diet. Our findings suggest that stable isotope ratios of bottled water have the power to distinguish ultimate (e.g., recharge) and proximal (e.g., reservoir) sources of bottled water and constitute a potential

  14. Acetaldehyde in mineral water stored in polyethylene terephthalate (PET) bottles: Odour threshold and quantification

    NARCIS (Netherlands)

    Nijssen, B.; Kamperman, T.; Jetten, J.

    1996-01-01

    The use of PET bottles for packaging soft drinks and mineral waters is still growing world wide. The production process for these bottles is improving constantly. These improvements are focussed on bottles with better barrier properties, higher inertness and higher heat stability. One of the factors

  15. Acetaldehyde in mineral water stored in polyethylene terephthalate (PET) bottles: Odour threshold and quantification

    NARCIS (Netherlands)

    Nijssen, B.; Kamperman, T.; Jetten, J.

    1996-01-01

    The use of PET bottles for packaging soft drinks and mineral waters is still growing world wide. The production process for these bottles is improving constantly. These improvements are focussed on bottles with better barrier properties, higher inertness and higher heat stability. One of the factors

  16. DETERMINATION OF PHTHALATES FROM BOTTLED WATER BY GC-MS

    Directory of Open Access Journals (Sweden)

    IRINA DUMITRAȘCU

    2012-03-01

    Full Text Available Determination of phthalates from bottled water by GC-MS. Phthalates are ubiquitous pollutants in the environment, due to their widespread use in the last years. These compounds are used principally as plasticizers, to impact flexibility, workability and durability to polymers but they can also be found in products such as paints, adhesives, inks and cosmetics. Phthalates are not chemically bounded to polymers; hence they are easily released and migrate into foods, beverages and drinking water from the packaging or bottling materials or manufacturing processes. This process accelerates as plastic products age and break down. With respect to their endocrine disrupting potential, phthalates such as benzyl butyl phthalate (BBP, di-butyl phthalate (DBP and di-isobutyl phthalate (DIBP have been found to elicit estrogenic responses in in vitro assays. It is possible that phthalates are a contributory factor to endocrine-mediated adverse effects observed in wildlife and humans over the past few decades. In this experiment we have analyzed the phthalates from different bottled waters purchased from the market. Determination by gas chromatography in combination with mass spectrometry detector (GC–MS in electronic ionization mode (EI with selected-ion monitoring (SIM acquisition method (GC–MS (EI–SIM has been carried out. Methods have been developed for both qualitative and quantitative analysis of phthalates. The base peak (m/z = 149 of all the phthalates was selected for the screening studies. The characteristic ions of each compound were chosen for quantitative studies.

  17. Several properties offilament fibers made from recycled bottles of mineral water using melt spinning method

    Science.gov (United States)

    Muslim, Ikhwanul; Mardiyati; Basuki, Arif

    2016-01-01

    Waste mineral water bottles made of PET called post-consumer POSTC-PET packaging with recycling code no. 1 can be made into another material other than the bottle by using a mechanical recycling process. In this experiment carried waste recycling process bottled mineral water bottles of PET into filament fibres with the aid of a melt spinning. From the resulting experimental filament fibres diameter of 14-15 microns, obtained the draw ratio is 1/46, 573,5 - 699,8 MPa tensile strength, modulus of elasticity of 2,01 - 2,45GPa, moisture regain of 2,84. Keywords. PET; Bottle; Fiber; Melt; Spinning; Drawing.

  18. Chemical migration in drinking water stored in polyethylene terephthalate (PET) bottles: a source of controversy

    OpenAIRE

    Bach, Cristina; Dauchy, Xavier; Chagnon, Marie-Christine; Etienne, Serge

    2012-01-01

    International audience; Due to its chemical inertness and physical properties PET is particularly suitable for food packaging applications, especially for drinking water. More bottled water is consumed than other bottled beverages. This article is a survey and toxicological investigation of chemical compounds, which are able to diffuse from PET bottles to water. The exact detailed chemical composition of plastic materials is known only from information provided by manufacturers. A declaration...

  19. Water-based Tourism and Leisure Product Audit 2006

    OpenAIRE

    Huskyes, E.; O'Connor, K.

    2006-01-01

    In consultation with key agencies and stakeholders, the Marine Institute is drafting a Development Strategy for the marine/water-based tourism and leisure sector for the period 2007-2013. Preparation and research for this has involved the completion of a Water-based Tourism and Leisure Product Audit. The Institute worked in collaboration with Royal Haskoning, spatial planning consultants, and Kevin O’Connor, Donegal County Council, to complete the audit. The objective of the audit is to syste...

  20. Effects of Water Bottle Materials and Filtration on Bisphenol A Content in Laboratory Animal Drinking Water.

    Science.gov (United States)

    Honeycutt, Jennifer A; Nguyen, Jenny Q T; Kentner, Amanda C; Brenhouse, Heather C

    2017-05-01

    Bisphenol A (BPA) is widely used in the polycarbonate plastics and epoxy resins that are found in laboratory animal husbandry materials including cages and water bottles. Concerns about BPA exposure in humans has led to investigations that suggest physiologic health risks including disruptions to the endocrine system and CNS. However, the extent of exposure of laboratory animals to BPA in drinking water is unclear. In the first study, we compared the amount of BPA contamination in water stored in plastic bottles used in research settings with that in glass bottles. The amount of BPA that leached into water was measured across several time points ranging from 24 to 96 h by using a BPA ELISA assay. The results showed that considerable amounts of BPA (approximately 0.15 μg/L) leached from polycarbonate bottles within the first 24 h of storage. In the second study, BPA levels were measured directly from water taken from filtered compared with unfiltered taps. We observed significantly higher BPA levels in water from unfiltered taps (approximately 0.40 μg/L) compared with taps with filtration systems (approximately 0.04 μg/L). Taken together, our findings indicate that the use of different types of water bottles and water sources, combined with the use of different laboratory products (food, caging systems) between laboratories, likely contribute to decreased rigor and reproducibility in research. We suggest that researchers consider reporting the types of water bottles used and that animal care facilities educate staff regarding the importance of flushing nonfiltered water taps when filling animal water bottles.

  1. Public perception and economic implications of bottled water consumption in underprivileged urban areas.

    Science.gov (United States)

    Massoud, M A; Maroun, R; Abdelnabi, H; Jamali, I I; El-Fadel, M

    2013-04-01

    This paper presents a comparative assessment of public perception of drinking water quality in two underprivileged urban areas in Lebanon and Jordan with nearly similar cultural and demographic characteristics. It compares the quality of bottled water to the quality of the drinking water supplied through the public network and examines the economic implications of bottled water consumption in the two study areas. Participants' perception of the quality of drinking water provided via the public network was generally negative, and bottled water was perceived to be of better quality in both areas, thus affecting drinking water preferences and consumption patterns. The results reveal that the quality of bottled water is questionable in areas that lack enforcement of water quality standards, thus adding to the burden of an already disadvantaged community. Both areas demonstrated a considerable cost incurred for purchasing bottled water in low income communities reaching up to 26 % of total income.

  2. Predictors of Drinking Water Boiling and Bottled Water Consumption in Rural China: A Hierarchical Modeling Approach.

    Science.gov (United States)

    Cohen, Alasdair; Zhang, Qi; Luo, Qing; Tao, Yong; Colford, John M; Ray, Isha

    2017-06-20

    Approximately two billion people drink unsafe water. Boiling is the most commonly used household water treatment (HWT) method globally and in China. HWT can make water safer, but sustained adoption is rare and bottled water consumption is growing. To successfully promote HWT, an understanding of associated socioeconomic factors is critical. We collected survey data and water samples from 450 rural households in Guangxi Province, China. Covariates were grouped into blocks to hierarchically construct modified Poisson models and estimate risk ratios (RR) associated with boiling methods, bottled water, and untreated water. Female-headed households were most likely to boil (RR = 1.36, p boiled. Our findings show that boiling is not an undifferentiated practice, but one with different methods of varying effectiveness, environmental impact, and adoption across socioeconomic strata. Our results can inform programs to promote safer and more efficient boiling using electric kettles, and suggest that if rural China's economy continues to grow then bottled water use will increase.

  3. Temporal variation of microbiological and chemical quality of noncarbonated bottled drinking water sold in Sri Lanka.

    Science.gov (United States)

    Herath, A T; Abayasekara, C L; Chandrajith, Rohana; Adikaram, N K B

    2012-03-01

    Use of bottled water in Sri Lanka has increased over the last decade, while new brands of bottled water are often introduced to the market. However, the manufacturers' adherence to bottled water regulations is questionable, raising concerns regarding the quality of bottled water. The objective of the current study was to investigate the microbiological and chemical quality of bottled water in Sri Lanka. Thirty bottled water brands were sampled and their chemical and microbiological parameters were analyzed. Microbiological analysis was carried out within 1 to 3, 3 to 6, 6 to 9, and 9 to 12 mo after the date of manufacture. The results indicated that 63% of brands tested exceeded the levels permitted by the Sri Lanka Standards Institution (SLSI) for presumptive total coliforms (TC) (bottled drinking water. Throughout their shelf life, the counts of TC, FC, and HPC bacteria decreased. Bacteria identified were Klebsiella pneumoniae ssp. pneumoniae, Enterobacter cloacae, Pseudomonas aeruginosa, and Pasteurella haemolytica, the most frequently being P. aeruginosa. The dominant fungi identified were Aspergillus sp. and Penicillium sp. Inorganic chemical parameters were within permitted levels for all brands except for initial content of ammonia. The results of this study show the need for the bottling industry to be monitored closely by relevant authorities, in order to provide safe bottled drinking water to consumers in Sri Lanka.

  4. Identification of sources and production processes of bottled waters by stable hydrogen and oxygen isotope ratios.

    Science.gov (United States)

    Brencic, Mihael; Vreca, Polona

    2006-01-01

    Bottled water is a food product that considerably depends on the environment from which it originates, not only at the place where it is produced, but predominantly on the conditions in the recharge area of the wells captured for bottling. According to their source and the bottling process, bottled waters can be divided into natural and artificially sparkling waters, still and flavoured waters. These waters originate from various parts of the hydrological cycle and their natural origin is reflected in their hydrogen and oxygen stable isotopic compositions (delta(2)H and delta(18)O). A total of 58 domestic and foreign brands and 16 replicates of bottled waters, randomly collected on the Slovene market in September 2004, were analysed for delta(2)H and delta(18)O. The isotopic composition varied between -83 per thousand and -46 per thousand with an average of -66 per thousand for hydrogen, and between -11.9 per thousand and -7.5 per thousand with an average of -9.6 per thousand for oxygen. This investigation helped (1) to determine and test the classification of bottled waters, (2) to determine the natural origin of bottled water, and (3) to indicate differences between the natural and production processes. The production process may influence the isotopic composition of flavoured waters and artificially sparkling waters. No such modification was observed for still and natural sparkling waters. The methods applied, together with hydrological knowledge, can be used for the authentication of bottled waters for regulatory and consumer control applications.

  5. Concentrations of selected trace elements in mineral and spring bottled waters on the Serbian market.

    Science.gov (United States)

    Ristić, M; Popović, I; Pocajt, V; Antanasijević, D; Perić-Grujić, A

    2011-01-01

    Eight selected trace elements, which are generally included in regulations, were analyzed in 23 types of bottled waters. Ten mineral and seven spring bottled waters were from the Serbian market and six mineral bottled waters were obtained in different EU countries. For the purpose of comparison, selected tap waters were also analyzed. Inductively coupled plasma mass spectrometry (ICP-MS) was used for the analysis of trace elements (arsenic, cadmium, copper, manganese, nickel, lead and antimony). Results were compared with the Serbian regulations for bottled water, EU regulations and guideline values set by the World Health Organization for drinking water. With few exceptions, the trace element levels of most bottled waters were below the guideline values. However, a higher content of antimony was observed in waters from polyethylene terephthalate (PET) containers, indicating a potential leaching of this element from the plastic packaging.

  6. Microbial evaluation of bottled water marketed in North India

    Directory of Open Access Journals (Sweden)

    Bhawna Sharma

    2015-01-01

    Full Text Available Drinking unsafe and unhygienic water can cause waterborne diseases such as diarrhea and typhoid. The present study describes the microbial evaluation of bottled water sold in North India. The samples were analyzed for total viable count and coliforms and susceptibility to different antibiotics. Though free of coliforms, the samples had a total viable count ranging from 0.01 × 10 [1] cfu/mL to 2.40 × 10 [3] cfu/mL and in 17% of the samples, total viable count was much higher than specified by the Bureau of Indian Standards (BIS, Government of India. Among the samples, 6.5% also showed fungal growth. On checking the sensitivity of bacteria isolates to different antibiotics, most of the strains were found to be resistant to a number of antibiotics. It can thus be concluded that the consumption of bottled water with a high viable count and that was bacteria-resistant to different antibiotics may have an effect on the health of the consumers, especially immune-compromised individuals.

  7. Development of a Specialized Pack for Shipping Water Specimens in Glass Bottles.

    Science.gov (United States)

    1982-08-01

    AD-R120 514 DEVELOPMENT OF A SPECIALIZED PACK FOR SHIPPING WATER ji’j SPECIMENS IN GLASS BOTTLES (U) AIR FORCE PACKAGING EVALUATION AGENCY WRIGHT...787-4519 immi Commercial (513) 257-4234 DIVIUCINT (W A SPICIALIZED PACK FOR SHIPING MATh SPECIMUS IN GLASS BOTTLS • S I) Air Force Packaging...breakage, during shipment, of glass bottles filled with water specimens. A prototype of the specialized container, employing the proposed Poly-Foam

  8. Measurements of radon and radium activity in bottled mineral water

    Energy Technology Data Exchange (ETDEWEB)

    Kappke, Jaqueline; Paschuk, Sergei A.; Correa, Janine N.; Reque, Marilson; Tabuchi, Camila Garcia; Del Claro, Flavia; Perna, Allan Felipe, E-mail: jaquelinekappke@gmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Deniak, Valeriy [Instituto de Pesquisa Pele Pequeno Principe, Curitiba, PR (Brazil)

    2013-07-01

    Current work presents the results of further development of optimized experimental protocol for RAD7 instant radon detector (Durridge Company Inc.) usage in low level radon in water measurements and the results concerning Ra-226 activity evaluation in bottled mineral water samples purchased at Brazilian market. With the purpose to achieve the statistically consistent results for the activity levels of 0.1Bq/L for radon (radium) activity in water, present study used modified experimental protocol which consists of: 1) water samples were stored in hermetically sealed glass vials of 250mL during 30 days to guarantee that Rn-222 will reach the secular equilibrium; 2) the measurements were performed using WAT250 protocol of RAD7 detector; 3) with an aim to decrease the background, the cleaning (activated carbon filter) and drying (DRIERITE desiccant) vessels, which have a function to retain the radioactive decay product of Rn-222 and humidity, were connected to a closed air loop of RAD7 permanently by means of valves and taps, which gave a possibility to repeat all sequence of measurements (including background evaluation) three or four times without to open the air loop and disconnect the sample vial with water. Each water sample was submitted to such measurements two or three times. Obtained results presented the level of Ra-226 activity in studied samples of bottled mineral water that varied from 0.007 ± 0.061 Bq/L to 0.145 ± 0.049 Bq/L, which is below the limit of 0,5 Bq/L established by the World Health Organization (WHO) in 2011 for drinking water. (author)

  9. 40 CFR 142.57 - Bottled water, point-of-use, and point-of-entry devices.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Bottled water, point-of-use, and point... Issued by the Administrator § 142.57 Bottled water, point-of-use, and point-of-entry devices. (a) A State may require a public water system to use bottled water, point-of-use devices, or...

  10. Natural activity concentrations in bottled drinking water and consequent doses.

    Science.gov (United States)

    Kabadayi, Önder; Gümüs, Hasan

    2012-07-01

    The radioactivity concentrations of nuclides (238)U, (232)Th and (40)K in bottled drinking water from six different manufacturers from Turkey were measured using high-resolution gamma-ray spectrometry. The measurement was done using a coaxial high-purity germanium detector system coupled to Ortec-Dspect jr digital MCA system. The average measured activity concentrations of the nuclides (238)U, (232)Th and (40)K are found to be 0.781, 1.05 and 2.19 Bq l(-1), respectively. The measured activity concentrations have been compared with similar studies from different locations. The annual effective doses for ingestion of radionuclides in the water are found to be 0.0246 mSv for (238)U and 0.169 mSv for (232)Th.

  11. Water Jets from Bottles, Buckets, Barrels, and Vases with Holes

    Science.gov (United States)

    Lopac, Vjera

    2015-03-01

    Observation of the water jets flowing from three equidistant holes on the side of a vertical cylindrical bottle is an interesting and widely used didactical experiment illustrating the laws of fluids in motion. In this paper we analyze theoretically and numerically the ranges of the stationary water jets flowing from various rotationally symmetric vessels with holes, and their dependence on the height of the holes above the bottom, on thickness of the block supporting the vessel, and on different shapes of the vessel profile. This investigation was motivated by controversial descriptions and illustrations repeatedly found in physics textbooks and by the fact that previously in the physics teaching literature only the cylindrical vessel was treated.

  12. 75 FR 14607 - Small Entity Compliance Guide: Bottled Water: Total Coliform and E. coli

    Science.gov (United States)

    2010-03-26

    ... and E. coli; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food... ``Bottled Water: Total Coliform and E. coli--Small Entity Compliance Guide'' for a final rule published in... are Escherichia coli (E. coli), an indicator of fecal contamination. FDA also amended its bottled...

  13. Migration of bisphenol A into water from polycarbonate baby bottles during microwave heating

    NARCIS (Netherlands)

    Ehlert, K.A.; Beumer, C.W.E.; Groot, M.C.E.

    2008-01-01

    A comprehensive migration database was established for bisphenol A from polycarbonate baby bottles into water during exposure to microwave heating. Eighteen different brands of polycarbonate baby bottles sold in Europe were collected. Initial residual content of bisphenol A and migration after micro

  14. Migration of bisphenol A into water from polycarbonate baby bottles during microwave heating

    NARCIS (Netherlands)

    Ehlert, K.A.; Beumer, C.W.E.; Groot, M.C.E.

    2008-01-01

    A comprehensive migration database was established for bisphenol A from polycarbonate baby bottles into water during exposure to microwave heating. Eighteen different brands of polycarbonate baby bottles sold in Europe were collected. Initial residual content of bisphenol A and migration after

  15. Determination of Perchlorate in Bottled Water from Italy

    Directory of Open Access Journals (Sweden)

    Patrizia Iannece

    2013-06-01

    Full Text Available Perchlorate is regarded as an emerging persistent inorganic contaminant. It is widely known that perchlorate is an endocrine disruptor as it competitively inhibits iodide transport in the thyroid gland. As drinking water is the major source of human exposure to perchlorate, its occurrence in commercially available bottled waters purchased in different regions of Italy was investigated. Perchlorate was measured using the rapid, sensitive, and selective LC-ESI-MS/MS (liquid chromatography-electrospray tandem mass spectrometry method by multiple reaction monitoring (MRM of the transition 98.8→82.8, which corresponds to the loss of one oxygen atom in the perchlorate ion (ClO4−→ClO3−. The chlorine isotope ratio (35Cl/37Cl was used as a confirmation tool. The limit of quantification (LOQ for this method was 5 ng/L, and the recovery ranged from 94% to 108%. Perchlorate was detected in 44 of the 62 drinking waters tested, with concentrations ranging from <5 to 75 ng/L. These values are similar in magnitude to those reported in drinking water from the USA and do not pose an immediate health concern.

  16. Determination of dimethyl selenide and dimethyl sulphide compounds causing off-flavours in bottled mineral waters.

    Science.gov (United States)

    Guadayol, Marta; Cortina, Montserrat; Guadayol, Josep M; Caixach, Josep

    2016-04-01

    Sales of bottled drinking water have shown a large growth during the last two decades due to the general belief that this kind of water is healthier, its flavour is better and its consumption risk is lower than that of tap water. Due to the previous points, consumers are more demanding with bottled mineral water, especially when dealing with its organoleptic properties, like taste and odour. This work studies the compounds that can generate obnoxious smells, and that consumers have described like swampy, rotten eggs, sulphurous, cooked vegetable or cabbage. Closed loop stripping analysis (CLSA) has been used as a pre-concentration method for the analysis of off-flavour compounds in water followed by identification and quantification by means of GC-MS. Several bottled water with the aforementioned smells showed the presence of volatile dimethyl selenides and dimethyl sulphides, whose concentrations ranged, respectively, from 4 to 20 ng/L and from 1 to 63 ng/L. The low odour threshold concentrations (OTCs) of both organic selenide and sulphide derivatives prove that several objectionable odours in bottled waters arise from them. Microbial loads inherent to water sources, along with some critical conditions in water processing, could contribute to the formation of these compounds. There are few studies about volatile organic compounds in bottled drinking water and, at the best of our knowledge, this is the first study reporting the presence of dimethyl selenides and dimethyl sulphides causing odour problems in bottled waters.

  17. Co-leaching of brominated compounds and antimony from bottled water.

    Science.gov (United States)

    Andra, Syam S; Makris, Konstantinos C; Shine, James P; Lu, Chensheng

    2012-01-01

    A fast-growing bottled water market is occasionally challenged by reports calling for contaminant leaching from water-contact materials (plastics). Our focus was on leaching of antimony (Sb) and brominated compounds expressed by total soluble bromine (Br) measurements, including those of polybrominated diphenyl ethers (PBDE). Studies are lacking on concomitant leaching of two or more inorganic plastic constituents from the same bottle. A market-representative basket survey of bottled water was initiated in Boston, USA supermarkets. Bottled water classes sampled were: i) non-carbonated (NCR), ii) carbonated (CR), and iii) non-carbonated and enriched (NCRE). Plastic bottle materials sampled were: polyethylene terephthalate (PET), high-density polyethylene (HDPE), polystyrene (PS), and polycarbonate (PC). Storage conditions for the 31 bottled water samples were: 23°C temperature, no-shaking and 12h/12h light/dark for 60days of equilibration. Average Br and Sb concentrations after 60-days of storage followed the order of NCRPET. Upon quantitative validation of PBDE leaching from certain plastic bottles into water, a revisit to existing PBDE exposure assessment reports will be deemed necessary. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Bottled water: analysis of mycotoxins by LC-MS/MS.

    Science.gov (United States)

    Mata, A T; Ferreira, J P; Oliveira, B R; Batoréu, M C; Barreto Crespo, M T; Pereira, V J; Bronze, M R

    2015-06-01

    The presence of mycotoxins in food samples has been widely studied as well as its impact in human health, however, information about its distribution in the environment is scarce. An analytical method comprising a solid phase extraction procedure followed by liquid chromatography tandem mass spectrometry analysis was implemented and validated for the trace analysis of mycotoxins in drinking bottled waters. Limits of quantification achieved for the method were between 0.2ngL(-1) for aflatoxins and ochratoxin, and 2.0ngL(-1) for fumonisins and neosolaniol. The method was applied to real samples. Aflatoxin B2 was the most frequently detected mycotoxin in water samples, with a maximum concentration of 0.48±0.05ngL(-1) followed by aflatoxin B1, aflatoxin G1 and ochratoxin A. The genera Cladosporium, Fusarium and Penicillium were the fungi more frequently detected. These results show that the consumption of these waters does not represent a toxicological risk for an adult.

  19. Measurement of radioactivity in bottled drinking water in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Palomo, M.; Penalver, A.; Borrull, F. [Unitat de Radioquimica Ambiental i Sanitaria, Universitat Rovira i Virgili, Edifici CTT-FURV, Av. Paisos Catalans 18, 43007 Tarragona (Spain); Aguilar, C. [Unitat de Radioquimica Ambiental i Sanitaria, Universitat Rovira i Virgili, Edifici CTT-FURV, Av. Paisos Catalans 18, 43007 Tarragona (Spain)], E-mail: carme.aguilar@urv.cat

    2007-10-15

    The radioactive parameters in the Spanish regulations on water intended for human consumption (law decree 140/2003) have been determined in 30 different brands of some of the most common bottled mineral waters produced and consumed in Spain. These waters are not included in this legislation but if their consumption increases, the dose of radiation in the population may also increase. After gross alpha activity, gross beta activity, gross beta without potassium contribution and tritium activity had been determined, only a few samples (16% of the samples analysed) were over the normative limit for gross alpha activity (0.1 Bq/l), whereas all the samples were below the normative limits for the other parameters. For samples with high gross alpha activity values, {sup 226}Ra and {sup 224}Ra were determined. The values were between 0.01 and 1.52 Bq/l, and between 0.01 and 0.38 Bq/l, respectively, so alpha activity should be considered to be of natural origin.

  20. Survey on Heterotrophic Bacterial Contamination in Bottled Mineral Water by Culture Method

    OpenAIRE

    Essmaeel Ghorbanalinezhad; Ghazaleh Saeedi; Delaram Khanjani

    2014-01-01

    Background and Aim: This project focuses on the level of heterotrophic baceria in bottled mineral water which could be a health concern for the elderly, infants, pregnant women and immuno-compromised patients. Materials and Methods: Different brands of bottled water samples were selected randomly and evaluated for their bacteriological quality, using different specific culture media and biochemical tests. Water samples were analyzed within 24 hours of their purchase/collection. Samples we...

  1. Assessing bottled water nitrate concentrations to evaluate total drinking water nitrate exposure and risk of birth defects

    Science.gov (United States)

    Weyer, Peter J.; Brender, Jean D.; Romitti, Paul A.; Kantamneni, Jiji R.; Crawford, David; Sharkey, Joseph R.; Shinde, Mayura; Horel, Scott A.; Vuong, Ann M.; Langlois, Peter H.

    2016-01-01

    Previous epidemiologic studies of maternal exposure to drinking water nitrate did not account for bottled water consumption. The objective of this National Birth Defects Prevention Study (NBDPS) (USA) analysis was to assess the impact of bottled water use on the relation between maternal exposure to drinking water nitrate and selected birth defects in infants born during 1997–2005. Prenatal residences of 1,410 mothers reporting exclusive bottled water use were geocoded and mapped; 326 bottled water samples were collected and analyzed using Environmental Protection Agency Method 300.0. Median bottled water nitrate concentrations were assigned by community; mothers’ overall intake of nitrate in mg/day from drinking water was calculated. Odds ratios for neural tube defects, limb deficiencies, oral cleft defects, and heart defects were estimated using mixed-effects models for logistic regression. Odds ratios (95% CIs) for the highest exposure group in offspring of mothers reporting exclusive use of bottled water were: neural tube defects [1.42 (0.51, 3.99)], limb deficiencies [1.86 (0.51, 6.80)], oral clefts [1.43 (0.61, 3.31)], and heart defects [2.13, (0.87, 5.17)]. Bottled water nitrate had no appreciable impact on risk for birth defects in the NBDPS. PMID:25473985

  2. Assessing bottled water nitrate concentrations to evaluate total drinking water nitrate exposure and risk of birth defects.

    Science.gov (United States)

    Weyer, Peter J; Brender, Jean D; Romitti, Paul A; Kantamneni, Jiji R; Crawford, David; Sharkey, Joseph R; Shinde, Mayura; Horel, Scott A; Vuong, Ann M; Langlois, Peter H

    2014-12-01

    Previous epidemiologic studies of maternal exposure to drinking water nitrate did not account for bottled water consumption. The objective of this National Birth Defects Prevention Study (NBDPS) (USA) analysis was to assess the impact of bottled water use on the relation between maternal exposure to drinking water nitrate and selected birth defects in infants born during 1997-2005. Prenatal residences of 1,410 mothers reporting exclusive bottled water use were geocoded and mapped; 326 bottled water samples were collected and analyzed using Environmental Protection Agency Method 300.0. Median bottled water nitrate concentrations were assigned by community; mothers' overall intake of nitrate in mg/day from drinking water was calculated. Odds ratios for neural tube defects, limb deficiencies, oral cleft defects, and heart defects were estimated using mixed-effects models for logistic regression. Odds ratios (95% CIs) for the highest exposure group in offspring of mothers reporting exclusive use of bottled water were: neural tube defects [1.42 (0.51, 3.99)], limb deficiencies [1.86 (0.51, 6.80)], oral clefts [1.43 (0.61, 3.31)], and heart defects [2.13, (0.87, 5.17)]. Bottled water nitrate had no appreciable impact on risk for birth defects in the NBDPS.

  3. Quality Assessment of Various Bottled-Water Andtap-Water in Kirkuk - Iraq

    Directory of Open Access Journals (Sweden)

    EmanHussein

    2014-06-01

    Full Text Available This study was conducted to demonstrate the suitability of bottled water used in Kirkuk city - Iraq and Tap water processed by the Directorate of Kirkuk’s water for human consumption, collected 20 type of bottled water ( local made and imported and nine Tap waters sample from different city regions , samples analysis both chemical& physical properties included (PH,Turbidity, E.C., T.D.S, T. Hardness, Alkalinity, T.S.S with measuring elements (Ca+ , Mg+ , Cl- , So4= , Na+&K+ , all data compared with ( IBWA, 2008 & ( IS 470 /2001, bottled water results compare with brand labels . Results showed the existence of discrepancies between the data obtained in vitro with what is listed on brands label , note that many of thebrands did not coverall properties should be known by the consumer for the purpose of safety of use, also the results showed that three regions in Kirkuk city and processed its water by the Water Directorate of Kirkuk is not suitable to drink.

  4. Community challenges when using large plastic bottles for Solar Energy Disinfection of Water (SODIS)

    National Research Council Canada - National Science Library

    Borde, Preeti; Elmusharaf, Khalifa; McGuigan, Kevin G; Keogh, Michael B

    2016-01-01

    .... The exposure to sunlight is typically carried out in small volume plastic beverage bottles (up to 2 l). Given the water requirements of consumption and basic personal hygiene, this may not always meet the needs of communities...

  5. Design and Operation of Equipment to Detect and Remove Water within Used Nuclear Fuel Storage Bottles

    Energy Technology Data Exchange (ETDEWEB)

    C.C. Baker; T.M. Pfeiffer; J.C. Price

    2013-09-01

    Inspection and drying equipment has been implemented in a hot cell to address the inadvertent ingress of water into used nuclear fuel storage bottles. Operated with telemanipulators, the system holds up to two fuel bottles and allows their threaded openings to be connected to pressure transducers and a vacuum pump. A prescribed pressure rebound test is used to diagnose the presence of moisture. Bottles found to contain moisture are dried by vaporization. The drying process is accelerated by the application of heat and vacuum. These techniques detect and remove virtually all free water (even water contained in a debris bed) while leaving behind most, if not all, particulates. The extracted water vapour passes through a thermoelectric cooler where it is condensed back to the liquid phase for collection. Fuel bottles are verified to be dry by passing the pressure rebound test.

  6. Is Your Drinking Water Acidic? A Comparison of the Varied pH of Popular Bottled Waters

    National Research Council Canada - National Science Library

    Wright, Kellie F

    2015-01-01

    .... However, water is not typically categorized as acidic. The purpose of this in-vitro study was to investigate the pH levels of several popular brands of bottled water and compare them to various other acidic beverages...

  7. The photocatalytic enhancement of acrylic and PET solar water disinfection (SODIS) bottles.

    Science.gov (United States)

    Carey, J M; Perez, T M; Arsiaga, E G; Loetscher, L H; Boyd, J E

    2011-01-01

    The solar water disinfection method (SODIS) was modified by the addition of a photocatalytic layer of titania on the interior surface of polyethylene terephthalate (PET) and acrylic bottles. Titania was solvent deposited on the interior of commercially available PET bottles, as well as bottles that were constructed from acrylic. Uncoated and titania-coated acrylic bottles removed 3,000,000-5,000,000 colony forming units per milliliter of K12 E. coli from 670 mL of contaminated water in 40 min of solar irradiance. After five hours of sunlight exposure, the concentration of 10 ppm methyl orange (a representative organic water contaminant), was reduced by 61% using the titania-coated acrylic bottles. The concentration of 87 ppb microcystin-LR (a representative algal toxin) was reduced by 70% after 7 hours of sunlight exposure in the titania-coated acrylic bottles. Acrylic is an effective alternative to PET for use in the SODIS method due to its greater UV transparency. The addition of titania to PET and acrylic bottles confers the ability to remove chemical contaminants in addition to inactivating microbiological contaminants.

  8. Multi-generational drinking of bottled low mineral water impairs bone quality in female rats.

    Directory of Open Access Journals (Sweden)

    Zhiqun Qiu

    Full Text Available Because of reproductions and hormone changes, females are more sensitive to bone mineral loss during their lifetime. Bottled water has become more popular in recent years, and a large number of products are low mineral water. However, research on the effects of drinking bottled low mineral water on bone health is sparse.To elucidate the skeletal effects of multi-generational bottled water drinking in female rats.Rats continuously drank tap water (TW, bottled natural water (bNW, bottled mineralized water (bMW, or bottled purified water (bPW for three generations.The maximum deflection, elastic deflection, and ultimate strain of the femoral diaphysis in the bNW, bMW, and bPW groups and the fracture strain in the bNW and bMW groups were significantly decreased. The tibiae calcium levels in both the bNW and bPW groups were significantly lower than that in the TW group. The tibiae and teeth magnesium levels in both the bNW and bPW groups were significantly lower than those in the TW group. The collagen turnover markers PICP (in both bNW and bPW groups were significantly lower than that in the TW group. In all three low mineral water groups, the 1,25-dihydroxy-vitamin D levels were significantly lower than those in the TW group.Long-term drinking of low mineral water may disturb bone metabolism and biochemical properties and therefore weaken biomechanical bone properties in females. Drinking tap water, which contains adequate minerals, was found to be better for bone health. To our knowledge, this is the first report on drinking bottled low mineral water and female bone quality on three generation model.

  9. Leaching of heavy metals from water bottle components into the drinking water of rodents.

    Science.gov (United States)

    Nunamaker, Elizabeth A; Otto, Kevin J; Artwohl, James E; Fortman, Jeffrey D

    2013-01-01

    Providing high-quality, uncontaminated drinking water is an essential component of rodent husbandry. Acidification of drinking water is a common technique to control microbial growth but is not a benign treatment. In addition to its potential biologic effects, acidified water might interact with the water-delivery system, leading to the leaching of heavy metals into the drinking water. The goal of the current study was to evaluate the effects of water acidification and autoclaving on water-bottle assemblies. The individual components of the system (stainless-steel sipper tubes, rubber stoppers, neoprene stoppers, and polysulfone water bottles) were acid-digested and analyzed for cadmium, chromium, copper, iron, lead, magnesium, manganese, selenium, and zinc to quantify the metal composition of each material. In addition the amounts of these metals that leached into tap and acidified water with and without autoclaving were quantified after 1 wk of contact time. On a weight basis, sipper tubes contained the largest quantities of all metals except magnesium and zinc, which were greatest in the neoprene stoppers. Except for cadmium and selenium, all metals had leached into the water after 1 wk, especially under the acidified condition. The quantities of copper, lead, and zinc that leached into the drinking water were the most noteworthy, because the resulting concentrations had the potential to confound animal experiments. On the basis of these findings, we suggest that water-quality monitoring programs include heavy metal analysis at the level of water delivery to animals.

  10. Treatment techniques for the recycling of bottle washing water in the soft drinks industry.

    Science.gov (United States)

    Ramirez Camperos, E; Mijaylova Nacheva, P; Diaz Tapia, E

    2004-01-01

    The soft drink production is an important sector in the manufacturing industry of Mexico. Water is the main source in the production of soft drinks. Wastewater from bottle washing is almost 50% of the total wastewater generated by this industry. In order to reduce the consumption of water, the water of the last bottle rinse can be reused in to the bottle pre-rinse and pre-washing cycles. This work presents the characterization of the final bottle washing rinse discharge and the treatability study for the most appropriate treatment system for recycling. Average characteristics of the final bottle wash rinse were as follows: Turbidity 40.46 NTU, COD 47.7 mg/L, TSS 56 mg/L, TS 693.6 mg/L, electrical conductivity 1,194 microS/cm. The results of the treatability tests showed that the final rinse water can be used in the pre-rinse and pre-washing after removing the totality of the suspended solids, 80% of the COD and 75% of the dissolved solids. This can be done using the following treatment systems: filtration-adsorption-reverse osmosis, or filtration-adsorption-ion exchange. The installation of these treatment techniques in the soft drink industry would decrease bottle washing water consumption by 50%.

  11. Survey on Heterotrophic Bacterial Contamination in Bottled Mineral Water by Culture Method

    Directory of Open Access Journals (Sweden)

    Essmaeel Ghorbanalinezhad

    2014-12-01

    Full Text Available Background and Aim: This project focuses on the level of heterotrophic baceria in bottled mineral water which could be a health concern for the elderly, infants, pregnant women and immuno-compromised patients. Materials and Methods: Different brands of bottled water samples were selected randomly and evaluated for their bacteriological quality, using different specific culture media and biochemical tests. Water samples were analyzed within 24 hours of their purchase/collection. Samples were filtered with 0.45 micron and filters were plated in different media. Then media were incubated at 37˚C for 24-48 hours. Results: Morphological study and biochemical tests revealed a number of bacteria in different   brands of  bottled water. Heterotrophic bacteria(Gram positive cocci, Spore forming gram positive bacilli, non spore forming gram positive bacilli, gram negative bacilli, and gram negative coccobacilli; Pseudomonas and Stenotrophomonas counted in 70% of bottled water samples. There were no cases of fecal contamination or the presence of E.coli. Conclusions: Bottled water is not sterile and contains trace amounts of bacteria naturally present or introduced during processing. Testing drinking water for all possible pathogens is complex, time-consuming, and expensive. If only total coliform bacteria are detected in drinking water, the source is probably environmental. Since the significance of non-pathogenic heterotrophic bacteria in relation to health and diseases is not understood, there is an urgent need to establish a maximum limit for the heterotrophic count in the bottled mineral water. Growth conditions play a critical role in the recovery of heterotrophic bacteria in bottled drinking water.

  12. The bacteriological quality of different brands of bottled water available to consumers in Ile-Ife, south-western Nigeria.

    Science.gov (United States)

    Igbeneghu, Oluwatoyin A; Lamikanra, Adebayo

    2014-11-28

    The upsurge in the demand for bottled water has prompted the interest of many manufacturers in the production of bottled water and very many water bottling companies are therefore involved in its production. These range from large scale multinational companies to medium scale business enterprises, institutional and government business investment companies as well as small scale entrepreneurs. There is however little information on the comparative quality of bottled water brands produced by different classes of water bottling companies in Nigeria. This study was undertaken to determine the bacteriological quality of brands of bottled water available to consumers in Ile-Ife. Forty-three samples of bottled water comprising of three batches each of thirteen bottled water brands and two batches of two brands were purchased and analyzed for total bacterial count, presence of coliform and the presence of other bacterial indicators of drinking water quality. Only 67.4% of the water samples representing the products of 10 companies or 66.7% of the brands had heterotrophic counts within the acceptable limits. Coliforms present in 100 ml of water were detected in 26.7% of the bottled water brands. Other indicator organisms detected included Staphylococci isolated from 27.9% of the samples (33.3% of the brands) and specifically Staphylococcus aureus found in four brands constituting 14% of the samples. Pseudomonas strains were consistently detected in consecutive batches of three brands of the water samples. Bottled water samples produced by the large scale multinational producers were of acceptable bacteriological quality unlike those produced by most small companies. There is need for a greater control of water bottling processes carried out by commercial bottled water producers in Nigeria.

  13. Quality of Sachet Water and Bottled Water in Bolgatanga Municipality of Ghana

    Directory of Open Access Journals (Sweden)

    Emmanuel O. Oyelude

    2012-01-01

    Full Text Available This study assessed the physicochemical and bacteriological characteristics of sachet and bottled water brands on sale in Bolgatanga municipality, Ghana. Turbidity, colour, total dissolved solids, total hardness, calcium ion, magnesium ion, total iron, chloride ion, nitrate ion, phosphate ion and sulphate ion of all samples were within the WHO drinking-water guideline. About fifty percent of the water samples had fluoride ion level ranging from 0.15-0.45 mg/L. These values are below the WHO recommended minimum limit of 0.5 mg/L. Sachet water samples generally possessed good physicochemical characteristics. However, three out of every four sachet water samples were contaminated by coliform bacteria ranging from 12-168 cfu/100 mL. Faecal coliform bacteria ranging from 2-63 cfu/100 mL were detected in more than 60% of the sachet water brands. All the unbranded hand-filled hand-tied sachet water samples without exception were contaminated by faecal coliform bacteria. This is contrary to the recommendation by WHO that faecal coliform bacteria must not be detectable in a 100-mL sample of drinking water. Although two percent of the bottled water samples had pH levels below the minimum level of 6.5 recommended by WHO, the samples generally possessed good physicochemical and bacteriological characteristics. On the average, bottled water samples were of good quality and the sachet water samples were of variable quality. This was probably due to the problem of poor sanitation in Bolgatanga municipality and the fact that sachet water brands are not always produced under scrutinised hygienic conditions.

  14. Detection of bacterial endotoxin in drinking tap and bottled water in Kuwait.

    Science.gov (United States)

    Abdulraheem, Abdulkareem; Mustafa, Seham; Al-Saffar, Nabeel; Shahjahan, Muhammed

    2012-12-01

    This study was carried out to measure and compare the concentration of bacterial endotoxin in a variety of samples from drinking tap and bottled water available in Kuwait by using the Limulus Amoebocyte lysate test. A total of 29 samples were tested. Samples were collected from a variety of locations throughout the six governorates of Kuwait and 23 brands of local and imported bottled water samples were collected from the local market. The concentration of bacterial endotoxin was measured by using the standard Limulus Amoebocyte lysate test, gel clot method. This study showed that measured endotoxin concentrations in tap drinking water varied from 2.4 to 33.8 EU/ml with the average endotoxin concentration of 14.2 EU/ml. While the results of endotoxin concentrations in the bottled water were bottled water is 13.5 % of the average concentration of endotoxin in tap drinking water. This experimental investigation has proved that drinking bottled water has less endotoxin as compared to tap water in Kuwait. It is also demonstrated that the endotoxin concentration did not exceed the acceptable level in drinking tap water.

  15. Applicability study of deuterium excess in bottled water life cycle analyses

    Directory of Open Access Journals (Sweden)

    Mihael Brenčič

    2014-12-01

    Full Text Available Paper explores the possible use of d‑excess in the investigation of bottled water. Based on the data set from Brencic and Vreca’s paper (2006. Identification of sources and production processes of bottled waters by stable hydrogen and oxygen isotope ratios, d‑excess values were statistically analysed and compared among different bottled water groups and different bottlers. The bottled water life cycle in relation to d‑excess values was also theoretically identified. Descriptive statistics and one-way ANOVA showed no significant differences among the groups. Differences were detected in the shape of empirical distributions. Groups of still and flavoured waters have similar shapes, but sparkling waters differed to the others. Two distinctive groups of bottlers could be discerned. The first group is represented by bottlers with a high range of d‑excess (from 7.7 ‰ to 18.6 ‰ with average of 12.0 ‰ exploring waters originating from the aquifers rich in highly mineralised groundwater and relatively high concentrations of CO2 gas. The second group is represented by bottlers using groundwater from relatively shallow aquifers. Their d‑excess values have characteristics similar to the local precipitation (from 7.8 ‰ to 14.3 ‰ with average of 10.3 ‰. More frequent sampling and better knowledge of production phases are needed to improve usage of isotope fingerprint for authentication of bottled waters.

  16. Optimization of fixed titanium dioxide film on PET bottles and visual indicator for water disinfection

    Science.gov (United States)

    Heredia-Munoz, Manuel Antonio

    Water is perhaps the most important resource that sustains human life. According to the World Health Organization (WHO), almost two billion people do not have access to the required water that is needed to satisfy their daily needs and one billion do not have access to clean sources of water for consumption, most of them living in isolated and poor areas around the globe. Poor quality water increases the risk of cholera, typhoid fever and dysentery, and other water-borne illness making this problem a real crisis that humankind is facing. Several water disinfection technologies have been proposed as solutions for this problem. Solar water disinfection using TiO2 coated PET bottles was the alternative that is studied in this work. This technology does not only inactivate bacteria but also disintegrates organic chemicals that can be present in water. The objectives of this work address the optimization of the TiO 2 coated PET bottles technologies. The improvement on the bottle coating process, using two coats of 10% W/V of TiO2 in a solution of vinegar and sodium bicarbonate to form the TiO2 film, the use of a different indigo carmine (1.25 X 10-1mg/pill) concentration in the pill indicator of contamination, the increase of the disinfection rate through shaking the bottles, degradation under intermittent UV radiation and the effect of bottle size on photocatalytic water disinfection were among the most important findings. A new mathematical model that describes better photocatalytic water disinfection in TiO2 coated bottles and simulates water disinfection under different working conditions was another important achievement. These results can now be used to design a strategy for disseminating this technology in areas where it is required and, in that way, generate the greatest positive impact on the people needing safe drinking water.

  17. Migration of bisphenol A and nonylphenol from mineral water bottles and disposable plastic containers into water at different temperatures

    National Research Council Canada - National Science Library

    Ali Kazemi; Habibollah Younesi; Nader Bahramifar

    2013-01-01

    Background and Objectives: bisphenol A and nonylphenol are xenoestrogen materials used as a monomer of plastics in widely volume in the production of plastic materials especially mineral water bottles and disposable plastic containers...

  18. Is container type the biggest predictor of trace element and BPA leaching from drinking water bottles?

    Science.gov (United States)

    Rowell, Candace; Kuiper, Nora; Preud'Homme, Hugues

    2016-07-01

    The knowledge-base of bottled water leachate is highly contradictory due to varying methodologies and limited multi-elemental and/or molecular analyses; understanding the range of contaminants and their pathways is required. This study determined the leaching potential and leaching kinetics of trace elements, using consistent comprehensive quantitative and semi-quantitative (79 elements total) analyses, and BPA, using isotopic dilution and MEPS pre-concentration with UHPLC-ESI-QTOF. Statistical methods were used to determine confounders and predictors of leaching and human health risk throughout 12days of UV exposure and after exposure to elevated temperature. Various types of water were used to assess the impact of water quality. Results suggest Sb leaching is primarily dependent upon water quality, not container type. Bottle type is a predictor of elemental leaching for Pb, Ba, Cr, Cu, Mn and Sr; BPA was detected in samples from polycarbonate containers. Health risks from the consumption of bottled water increase after UV exposure.

  19. Microbiological quality of water processed and bottled in Zimbabwe

    African Journals Online (AJOL)

    cyanide residues from disused gold mine dumps. There are various ... bottled in Zimbabwe has. African Journal of Health Sciences Volume 9 Number 1-2, January-June 2002 ... metabolism on triple sugar iron (TSI) afar. Bacillus species were ...

  20. Microbiological safety of bottled mineral water in patients susceptible to infections.

    Science.gov (United States)

    Oie, Shigeharu; Matsuzaka, Yuuki; Kiyonaga, Hiroko; Maeda, Kumiko; Kamiya, Akira

    2008-08-01

    We evaluated the microbiological safety of bottled mineral water products commercially available in Japan. Of 10 bottled mineral water products manufactured in Japan, no bacteria or fungi were detected in 9 (90%), but 1 (10%) contained 1.8x10(3) colony-forming units (cfu)/mL. Of 12 bottled mineral water products manufactured in the EU, 11 (91.7%) contained 23-3.5x10(4) cfu/mL. On the other hand, of 5 bottled mineral water products manufactured in North America, 2 (40%) contained 2.3x10(2)-2.5x10(3) cfu/mL. The detected microorganisms were glucose-nonfermentative Gram-negative bacilli such as Brevundimonas vesicularis, Moraxella spp., and Burkholderia cepacia, but Pseudomonas aeruginosa was not detected in any product. For immunocompromised host patients being managed in ultra-clean rooms, the examined bottled mineral water products manufactured in Japan, except 1, were microbiologically safe.

  1. Fluoride Intake through Consumption of Tap Water and Bottled Water in Belgium

    Directory of Open Access Journals (Sweden)

    Herman van Oyen

    2009-05-01

    Full Text Available There is a tendency to align higher levels of fluoride in natural mineral water with the existing higher levels in tap water. Treatment of natural mineral waters could harm the preservation of their natural character. In this study fluoride intake through bottled and tap water consumption in the Belgian adult population was assessed, taking into account regional differences. A deterministic approach was used whereby consumption quantities of tap water and different brands of bottled water were linked with their respective fluoride concentrations. Data from the national food consumption survey (2004 were used and the Nusser methodology was applied to obtain usual intake estimates. Mean intake of fluoride through total water consumption in Flanders was 1.4±0.7 mg/day (97.5th percentile: 3.1 mg/day, while in the Walloon region it was on average 0.9±0.6 mg/day (97.5th percentile: 2.4 mg/day. The probability of exceeding the UL of 7 mg per day via a normal diet was estimated to be low. Consequently, there is no need to revise the existing norms, but higher fluoride concentrations should be more clearly indicated on the labels. Reliable data about total dietary fluoride intake in children, including intake of fluoride via tooth paste and food supplements, are needed.

  2. Fluoride content in bottled drinking waters, carbonated soft drinks and fruit juices in Davangere city, India

    Directory of Open Access Journals (Sweden)

    Thippeswamy H

    2010-01-01

    Full Text Available Background: The regular ingestion of fluoride lowers the prevalence of dental caries. The total daily intake of fluoride for optimal dental health should be 0.05-0.07 mg fluoride/kg body weight and to avoid the risk of dental fluorosis, the daily intake should not exceed a daily level of 0.10 mg fluoride/kg body weight. The main source of fluoride is from drinking water and other beverages. As in other countries, consumption of bottled water, juices and carbonated beverages has increased in our country. Objective: To analyze the fluoride content in bottled water, juices and carbonated soft drinks that were commonly available in Davangere city. Materials and Methods: Three samples of 10 commercially available brands of bottled drinking water, 12 fruit juices and 12 carbonated soft drinks were purchased. Bottled water and carbonated soft drinks were stored at a cold place until fluoride analysis was performed and a clear juice was prepared using different fruits without the addition of water. Then, the fluoride analysis was performed. Results: The mean and standard deviation of fluoride content of bottled water, fruit juices and carbonated soft drinks were measured, which were found to be 0.20 mg (±0.19 F/L, 0.29 mg (±0.06 F/L and 0.22 mg (±0.05 F/L, respectively. Conclusion: In viewing the results of the present study, it can be concluded that regulation of the optimal range of fluoride in bottled drinking water, carbonated soft drinks and fruit juices should be drawn for the Indian scenario.

  3. Fluoride content in bottled drinking waters, carbonated soft drinks and fruit juices in Davangere city, India.

    Science.gov (United States)

    Thippeswamy, H M; Kumar, Nanditha; Anand, S R; Prashant, G M; Chandu, G N

    2010-01-01

    The regular ingestion of fluoride lowers the prevalence of dental caries. The total daily intake of fluoride for optimal dental health should be 0.05-0.07 mg fluoride/kg body weight and to avoid the risk of dental fluorosis, the daily intake should not exceed a daily level of 0.10 mg fluoride/kg body weight. The main source of fluoride is from drinking water and other beverages. As in other countries, consumption of bottled water, juices and carbonated beverages has increased in our country. To analyze the fluoride content in bottled water, juices and carbonated soft drinks that were commonly available in Davangere city. Three samples of 10 commercially available brands of bottled drinking water, 12 fruit juices and 12 carbonated soft drinks were purchased. Bottled water and carbonated soft drinks were stored at a cold place until fluoride analysis was performed and a clear juice was prepared using different fruits without the addition of water. Then, the fluoride analysis was performed. The mean and standard deviation of fluoride content of bottled water, fruit juices and carbonated soft drinks were measured, which were found to be 0.20 mg (±0.19) F/L, 0.29 mg (±0.06) F/L and 0.22 mg (±0.05) F/L, respectively. In viewing the results of the present study, it can be concluded that regulation of the optimal range of fluoride in bottled drinking water, carbonated soft drinks and fruit juices should be drawn for the Indian scenario.

  4. Comparative assessment of genotoxicity of mineral water packed in polyethylene terephthalate (PET) and glass bottles.

    Science.gov (United States)

    Ceretti, Elisabetta; Zani, Claudia; Zerbini, Ilaria; Guzzella, Licia; Scaglia, Mauro; Berna, Vanda; Donato, Francesco; Monarca, Silvano; Feretti, Donatella

    2010-03-01

    The potential migration of genotoxic compounds into mineral water stored in polyethylene terephthalate (PET) bottles was evaluated by an integrated chemical/biological approach using short-term toxicity/genotoxicity tests and chemical analysis. Six commercial brands of still and carbonated mineral water bottled in PET and in glass were stored at 40 degrees C for 10 days in a stove according to the standard EEC total migration test (82/711/EEC), or at room temperature in the dark. After treatment, the samples were analysed using gas-chromatography/mass spectrometry (GC/MS) to detect volatile and non-volatile compounds, the Microtox test to evaluate potential toxicity of the samples, and three mutagenicity tests -Tradescantia and Allium cepa micronucleus tests and the Comet assay on human leukocytes - to detect their genotoxic activity. GC/MS analysis did not detect phthalates or acetaldehyde in the water samples. The Microtox test found no toxic effects. Mutagenicity tests detected genotoxic properties of some samples in both PET and glass bottles. Statistical analyses showed a positive association between mineral content and mutagenicity (micronuclei in A. cepa and DNA damage in human leukocytes). No clear effect of treatment and PET bottle was found. These results suggest the absence of toxic compounds migrating from PET regardless of time and conditions of storage. In conclusion, bottle material and stove treatment were not associated with the genotoxic properties of the water; the genotoxic effects detected in bottled water may be related to the characteristics of the water (minerals and CO(2) content).

  5. Assessing the Chemical Components of some Iranian Brands of Bottled Water

    Directory of Open Access Journals (Sweden)

    Miranzadeh M.B.1 PhD,

    2015-09-01

    Full Text Available Aims Bottled water is widely used in many countries and more than 100 different brands of bottled water are produced in Iran. The aim of the present research was to assess the chemical compound of some Iranian brands of bottled water and compare them with the mention information on their labels. Instrument & Methods This descriptive study was performed during March to December 2012 on the 16 brands of bottled water produced in Iran. Random sampling (10 samples for each brand was done by buying 1.5liter bottled water with different brands from the supermarkets in Kashan City, Iran. The concentration of Na+, K+, F-, NO3-, SO4-2 and Cl- and the pH of bottled water samples were measured. Data were analyzed by SPSS 16 software using independent T test. Findings The mean concentration of NO3- was 1.70±2.52mg/l, Na+ was 8.44±8.76mg/l, K+ was 0.11±0.53mg/l, SO4-2 was 15.15±12.49mg/l, Cl- was 42.30±33.84mg/l and F- was 1.02±1.88mg/l in all samples of 16 brands of bottled water. The highest concentration of NO3- was seen in brand 12 (9.55±2.76mg/l, Na+ in brand 6 (32.18±12.60mg/l, K+ in brand 13 and 4 (1.86±0.76mg/l, SO4-2 in brand 6 (40.53±8.90mg/l,Cl- in brand 16 (88.73±13.80mg/l, F- in brand 13 (0.63±0.12mg/l. The pH of brand 12 (7.9±0.1 was the highest among the samples. Conclusion The concentrations of Na+, K+, F-, NO3-, SO4-2 and Cl- of the studied Iranian brands of bottled water are not higher than the national and international standards and the pH is in the acceptable range.

  6. Carcinogenic and Non-Carcinogenic Assessment of Phthalates Exposure Through Consumption of Bottled Water During the Storage Time

    Directory of Open Access Journals (Sweden)

    M Zare Jeddi

    2015-08-01

    Conclusion: The research showed that the concentration of phthalates in PET-bottled water was extremely low. Consequently, based on the risk assessment results, bottled waters regarding existence of safe for consumers and they phthalates are not considered as public health issue for consumers as phthalates does not have any risk exposure for the consumers.

  7. Influence of minerals on the taste of bottled and tap water: a chemometric approach.

    Science.gov (United States)

    Platikanov, Stefan; Garcia, Veronica; Fonseca, Ignacio; Rullán, Elena; Devesa, Ricard; Tauler, Roma

    2013-02-01

    Chemometric analysis was performed on two sets of sensory data obtained from two separate studies. Twenty commercially-available bottled mineral water samples (from the first study) and twenty-five drinking tap and bottled water samples (from the second study) were blind tasted by trained panelists. The panelists expressed their overall liking of the water samples by rating from 0 (worst flavor) to 10 (best flavor). The mean overall score was compared to the physicochemical properties of the samples. Thirteen different physicochemical parameters were considered in both studies and, additionally, residual chlorine levels were assessed in the second study. Principal component analysis performed on the physicochemical parameters and the panelists' mean scores generated models that explain most of the total data variance. Moreover, partial least squares regression of the panelists' sensory evaluations of the physicochemical data helped elucidate the main features underlying the panelists' ratings. The preferred bottled and tap water samples were associated with moderate (relatively to the parameters mean values) contents of total dissolved solids and with relatively high concentrations of HCO₃⁻, SO₄²⁻, Ca²⁺ and Mg²⁺ as well as with relatively high pH values. High concentrations of Na⁺, K⁺ and Cl⁻ were scored low by many of the panelists, while residual chlorine did not affect the ratings, but did enable the panel to distinguish between bottled mineral water and tap water samples.

  8. Simple Model of a Rolling Water-Filled Bottle on an Inclined Ramp

    Science.gov (United States)

    Lin, Shihao; Hu, Naiwen; Yao, Tianchen; Chu, Charles; Babb, Simona; Cohen, Jenna; Sangiovanni, Giana; Watt, Summer; Weisman, Danielle; Klep, James; Walecki, Wojciech J.; Walecki, Eve S.; Walecki, Peter S.

    2015-12-01

    We investigate a water-filled bottle rolling down an incline and ask the following question: is a rolling bottle better described by a model ignoring all internal motion where the bottle is approximated by a material point sliding down an incline, or is it better described by a rigid solid cylinder rolling down the incline without skidding? The measurements presented here represent a special case of similar experiments described by K.A. Jackson et al. (see Ref. 1 and references within). There exists also a report by Kagan describing the motion of soda cans rolling on an incline. In our case we investigate motion of the fully filled bottle. We demonstrate that within accuracy of our experiment the motion of the bottle can be described by a simple "frictionless water" model. The analysis of the dynamics of the bodies sliding and rolling on a ramp is a standard component of introductory physics classes, and a required component of the Advanced Placement (AP) Physics curriculum.

  9. MAIN PROBLEMS AND PROSPECTS OF REPUBLIC OF BELARUS IN RESPECT OF ITS ENTRY TO INTERNATIONAL BOTTLED WATER MARKET

    Directory of Open Access Journals (Sweden)

    P. G. Nikitenko

    2009-01-01

    Full Text Available The Republic of Belarus has significant reserves of ground fresh and mineral water. Consumption of bottled water in the world has a tendency of steady growth. In this regard, Belarus can increase production and sale of bottled water on the external  and domestic markets as well. The paper  describes main tendencies prevailing on the world market;  it contains an analysis of the normative and legal foundation on regulation of production and sale of bottled water in the Republic and abroad; the paper also estimates the possibilities to increase volume of export water

  10. Training of panellists for the sensory control of bottled natural mineral water in connection with water chemical properties.

    Science.gov (United States)

    Rey-Salgueiro, Ledicia; Gosálbez-García, Aitana; Pérez-Lamela, Concepción; Simal-Gándara, Jesús; Falqué-López, Elena

    2013-11-01

    As bottled mineral water market is increasing in the world (especially in emergent and developed countries), the development of a simple protocol to train a panel to evaluate sensory properties would be a useful tool for natural drinking water industry. A sensory protocol was developed to evaluate bottled natural mineral water (17 still and 10 carbonated trademarks). The tasting questionnaire included 13 attributes for still water plus overall impression and they were sorted by: colour hues, transparency and brightness, odour/aroma and taste/flavour/texture and 2 more for carbonated waters (bubbles and effervescence). The training lasted two months with, at least, 10 sessions, was adequate to evaluate bottled natural mineral water. To confirm the efficiency of the sensory training procedure two sensory groups formed the whole panel. One trained panel (6 persons) and one professional panel (6 sommeliers) and both participated simultaneously in the water tasting evaluation of 3 sample lots. Similar average scores obtained from trained and professional judges, with the same water trademarks, confirmed the usefulness of the training protocol. The differences obtained for trained panel in the first lot confirm the necessity to train always before a sensory procedure. A sensory water wheel is proposed to guide the training in bottled mineral water used for drinking, in connection with their chemical mineral content.

  11. A More Perfect Commodity: Bottled Water, Global Accumulation, and Local Contestation

    Science.gov (United States)

    Jaffee, Daniel; Newman, Soren

    2013-01-01

    Bottled water sits at the intersection of debates regarding the social and environmental effects of the commodification of nature and the ways neoliberal globalization alters the provision of public services. Utilizing Polanyi's concept of fictitious commodities and Harvey's work on accumulation by dispossession, this article traces bottled…

  12. A More Perfect Commodity: Bottled Water, Global Accumulation, and Local Contestation

    Science.gov (United States)

    Jaffee, Daniel; Newman, Soren

    2013-01-01

    Bottled water sits at the intersection of debates regarding the social and environmental effects of the commodification of nature and the ways neoliberal globalization alters the provision of public services. Utilizing Polanyi's concept of fictitious commodities and Harvey's work on accumulation by dispossession, this article traces bottled…

  13. Concentration of Selected Anions in Bottled Water in the United Arab Emirates

    OpenAIRE

    Abouleish, Mohamed Yehia Z.

    2012-01-01

    Several studies have shown concern over nitrate and nitrite contamination of prepared infant formula used by infants less than six months old, as it may lead to methemoglobinemia and death. One possible source of contamination is through the use of improperly treated drinking water. Contamination of water could result from fertilizers and manure runoff, not fully treated and released human and industrial waste, or from disinfection processes. In the United Arab Emirates (UAE), bottled water i...

  14. MICROBIOLOGICAL INVESTIGATION OF BOTTLED MINERAL AND DRINKING WATERS SOLD IN ESKİŞEHİR (TURKEY MARKETS

    Directory of Open Access Journals (Sweden)

    Merih KIVANC

    2011-08-01

    Full Text Available The microbiological quality of bottled natural spring and mineral water, purchased at different markets in Eskişehir (Turkey markets, was investigated. Applying the membrane filtration method, the aliquots of water samples were analyzed for the presence and enumeration of total coliforms, Es- cherichia coli, Enterococcus spp., Aeromonas hydrophila. Aerobic bacteria were counted as Heterotrophic Bacteria Count (HPC ml-¹ by incubation at 22 and 37 ⁰C. While Bacillus species in bottled mineral water samples have also been determined, any bacteria or contamination in bottled drinking water samples have not found.

  15. Potability Assessment of Selected Brands of Bottled Water in ...

    African Journals Online (AJOL)

    Michael Horsfall

    Department of Water Resources Management and Agrometeorology, ... values of water quality parameters were compared to World Health Organization (WHO) standards in drinking water. ..... design and implementation of freshwater,.

  16. Is Your Drinking Water Acidic? A Comparison of the Varied pH of Popular Bottled Waters.

    Science.gov (United States)

    Wright, Kellie F

    2015-06-01

    Dental professionals continually educate patients on the dangers of consuming acidic foods and beverages due to their potential to contribute to dental erosion and tooth decay. Excess acid in the diet can also lead to acidosis, which causes negative systemic side effects. However, water is not typically categorized as acidic. The purpose of this in-vitro study was to investigate the pH levels of several popular brands of bottled water and compare them to various other acidic beverages. Two different brands of marketed alkaline water (with a pH of 8.8 or higher) were also studied, tested for acidity and described. A pilot in-vitro study was conducted to determine the pH levels of a convenience sample of popular brands of bottled water, tap water and other known acidic beverages in comparison with the pH values reported on the respective manufacturers' website. Each beverage was tested in a laboratory using a calibrated Corning pH meter model 240, and waters were compared to the corresponding company's testified pH value. Waters were also compared and contrasted based on their process of purification. The data was then compiled and analyzed descriptively. The pH values for the tested beverages and bottled waters were found to be predominantly acidic. Ten out of the 14 beverages tested were acidic (pHwaters were neutral (pH=7) and 2 bottled waters were alkaline (pH>7). The majority of waters tested had a more acidic pH when tested in the lab than the value listed in their water quality reports. It is beneficial for the health care provider to be aware of the potential acidity of popular bottled drinking waters and educate patients accordingly. Copyright © 2015 The American Dental Hygienists’ Association.

  17. Concentration of Selected Anions in Bottled Water in the United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Mohamed Yehia Z. Abouleish

    2012-05-01

    Full Text Available Several studies have shown concern over nitrate and nitrite contamination of prepared infant formula used by infants less than six months old, as it may lead to methemoglobinemia and death. One possible source of contamination is through the use of improperly treated drinking water. Contamination of water could result from fertilizers and manure runoff, not fully treated and released human and industrial waste, or from disinfection processes. In the United Arab Emirates (UAE, bottled water is the major source of drinking water and may be used for the preparation of infant formula. Therefore, in this study, several bottled water brands that are sold on the UAE market, and could be used for preparation of infant formula, were tested for nitrate and nitrite and other anions to show their compatibility with the permissible levels of the United States Environmental Protection Agency (U.S. EPA, United States Food and Drug Administration/Code of Federal Regulations (U.S. FDA/CFR, and other international organizations. All the bottled water samples demonstrated nitrate, nitrite, and other anions levels below the permissible levels accepted by U.S. EPA, U.S. FDA/CFR, and other international organizations, except for one sample that showed nitrite levels exceeding the European Commission and Drinking Water Directive (EC/DWD permissible levels. Such study sheds light on the quality of bottled water sold not only in the UAE and the region, but also in other countries, such as France, since some of them are imported. In addition, the results shed light on the effectiveness of the treatment processes and possible sources of infant formula contamination that can affect the health of infants.

  18. Exposure assessment of endocrine disruptors in bottled drinking water of Lebanon.

    Science.gov (United States)

    Dhaini, Hassan R; Nassif, Rana M

    2014-09-01

    Bisphenol A (BPA) is a commonly used monomer in various products including bottled water. Numerous studies have reported endocrine adverse effects and neoplasia associated with BPA exposure in animals. However, considerable discrepancies exist among these studies with respect to both the nature of the toxic effects and the threshold dose. In Lebanon, 19-L polycarbonate (PC) bottles of drinking water are widely used in urban areas. The present study aims at assessing BPA human exposure and associated health risks from drinking water in Lebanese. A total of 22 bottled water sources, packaged in PC, were identified from licensed and non-licensed sources. Water samples were analyzed following exposure to sunlight for 72 h. BPA in water was quantified by HPLC, and other potential organic pollutants were screened by GC/MS. Fifty-nine percent of samples showed BPA levels above detection limits (>0.05 ng/mL). The median BPA level was 0.1 ng/mL (range 0.05 to 1.37 ng/mL). The mean BPA level for the total number of samples was 0.169 ng/mL (±0.280). A higher mean BPA level was found in water from licensed companies compared to non-licensed sources, however, not statistically significant. Screening showed the presence of dibutyl-phthalate and dioctyl-phthalate in only two samples. Endocrine disruptors (EDR) are ubiquitous contaminants in bottled water in Lebanon with potential health risk implications. Although estimated exposure levels are below the reference dose (RfD), further studies are needed to quantitate exposure from various sources and to investigate EDR contribution to existing epidemics in the country.

  19. [Fluoride content of bottled natural mineral waters in Spain and prevention of dental caries].

    Science.gov (United States)

    Maraver, Francisco; Vitoria, Isidro; Almerich-Silla, José Manuel; Armijo, Francisco

    2015-01-01

    The aim of the study was to determine the concentration of fluoride in natural mineral waters marketed in Spain in order to prevent tooth decay without the risk of causing dental fluorosis Descriptive and cross-sectional study during 2012. Natural mineral waters marketed in Spain. Three bottles with different bottling dates of 109 natural mineral waters (97 Spanish and 12 imported brands). Determination of fluoride by ion chromatography Median fluoride concentrations of the natural mineral waters bottled in Spain was 0.22 (range 0.00-4.16; interquartile range:0.37). Most samples (61 brands, 62%) contained less than 0.3mg/L. There are 19 Spanish brands with more than 0.6 mg/L. The median level in imported brands was 0.35 (range 0.10-1.21; interquartile range: 0.23). Only 28 of the 109 brands examined (25.6%) specified the fluoride content on the label. Good correlation was observed between the concentrations indicated and those determined. Fluoride concentrations in natural mineral waters showed high variation. Given the growing consumption of natural mineral waters in Spain, this type of information is important to make proper use of fluoride in the primary prevention of dental caries. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

  20. [Physicochemical composition of bottled drinking water marketed in Ouagadougou (Burkina Faso)].

    Science.gov (United States)

    Some, Issa Touridomon; Banao, Issouf; Gouado, Inocent; Tapsoba, Théophile Lincoln

    2009-01-01

    The bottled drinking water marketed in urban areas includes natural mineral water, spring water, and treated drinking water. Their physicochemical qualities depend on the type and quantity of their components and define their safe use. Bottled water is widely consumed in Ouagadougou (Burkina Faso), and many brand names exist. Although many publications have examined the microbiological qualities of such water, no study has examined the physicochemical quality of water from Burkina Faso. This study, conducted from March 2005 through January 2006, aimed to assess the physicochemical composition of drinking water sold in Ouagadougou to facilitate better choices and use by consumers. Results showed that all the water analyzed in Ouagadougou is soft (TH water, however, is hard and highly mineralized. French standards do not set limit values for the natural mineral water parameters described above, and much of the water sold in Ouagadougou was natural mineral water. The spring water met potability standards, except for the Montagne d'Arrée brand, which had a pH value of 5.8, below the WHO standards of 6.5 < pH 8.5.

  1. Collaborative validation of a rapid method for efficient virus concentration in bottled water

    DEFF Research Database (Denmark)

    Schultz, Anna Charlotte; Perelle, Sylvie; Di Pasquale, Simona

    2011-01-01

    . Three newly developed methods, A, B and C, for virus concentration in bottled water were compared against the reference method D: (A) Convective Interaction Media (CIM) monolithic chromatography; filtration of viruses followed by (B) direct lysis of viruses on membrane; (C) concentration of viruses...... by ultracentrifugation; and (D) concentration of viruses by ultrafiltration, for each methods' (A, B and C) efficacy to recover 10-fold dilutions of HAV and feline calicivirus (FCV) spiked in bottles of 1.5L of mineral water. Within the tested characteristics, all the new methods showed better performance than method D......Enteric viruses, including norovirus (NoV) and hepatitis A virus (HAV), have emerged as a major cause of waterborne outbreaks worldwide. Due to their low infectious doses and low concentrations in water samples, an efficient and rapid virus concentration method is required for routine control...

  2. Quantitative Assessment of Bisphenol A in Multiple Brands of Bottled Drinking Water in Iran

    Directory of Open Access Journals (Sweden)

    Mahmood Alimohammadi

    2014-06-01

    Full Text Available Background: Bisphenol A (BPA is one of the hazardous materials causing disruption of endocrine pathways. Due to water contamination by this component from multiple sources and the associated health problems, BPA has been the focus of multiple studies. It has been proved that BPA may cause harm because of its impact on estrogenic receptors in human and other organisms. Methods: In this study, the presence of Bisphenol A in bottled drinking water in Iran was evaluated by solid phase extraction (SPE and gas chromatography (GC. Compared to other studies measuring the level of Bisphenol A in milk, surface water, and wastewater, the present study focused on the levels of Bisphenol A in bottled drinking water to determine the safety risk level of BPA as a possible public health issue. Results: The results showed no evidence of BPA at levels above the standard within all analyzed samples. Conclusion: It seems that BPA is a low-risk component in bottled drinking water.

  3. Fecal indicators and bacterial pathogens in bottled water from Dhaka, Bangladesh.

    Science.gov (United States)

    Ahmed, W; Yusuf, R; Hasan, I; Ashraf, W; Goonetilleke, A; Toze, S; Gardner, T

    2013-01-01

    Forty-six bottled water samples representing 16 brands from Dhaka, Bangladesh were tested for the numbers of total coliforms, fecal indicator bacteria (i.e., thermotolerant Escherichia coli and Enterococcus spp.) and potential bacterial pathogens (i.e., Aeromonas hydrophila, Pseudomonas aeruginosa, Salmonella spp., and Shigella spp.). Among the 16 brands tested, 14 (86%), ten (63%) and seven (44%) were positive for total coliforms, E. coil and Enterococcus spp., respectively. Additionally, a further nine (56%), eight (50%), six (37%), and four (25%) brands were PCR positive for A. hydrophila lip, P. aeruginosa ETA, Salmonella spp. invA, and Shigella spp. ipaH genes, respectively. The numbers of bacterial pathogens in bottled water samples ranged from 28 ± 12 to 600 ± 45 (A. hydrophila lip gene), 180 ± 40 to 900 ± 200 (Salmonella spp. invA gene), 180 ± 40 to 1,300 ± 400 (P. aeruginosa ETA gene) genomic units per L of water. Shigella spp. ipaH gene was not quantifiable. Discrepancies were observed in terms of the occurrence of fecal indicators and bacterial pathogens. No correlations were observed between fecal indicators numbers and presence/absence of A. hydrophila lip (p = 0.245), Salmonella spp. invA (p = 0.433), Shigella spp. ipaH gene (p = 0.078), and P. aeruginosa ETA (p = 0.059) genes. Our results suggest that microbiological quality of bottled waters sold in Dhaka, Bangladesh is highly variable. To protect public health, stringent quality control is recommended for the bottled water industry in Bangladesh.

  4. Fecal indicators and bacterial pathogens in bottled water from Dhaka, Bangladesh

    Directory of Open Access Journals (Sweden)

    W. Ahmed

    2013-01-01

    Full Text Available Forty-six bottled water samples representing 16 brands from Dhaka, Bangladesh were tested for the numbers of total coliforms, fecal indicator bacteria (i.e., thermotolerant Escherichia coli and Enterococcus spp. and potential bacterial pathogens (i.e., Aeromonas hydrophil, Pseudomonas aeruginos, Salmonella spp., and Shigella spp.. Among the 16 brands tested, 14 (86%, ten (63% and seven (44% were positive for total coliforms, E. coil and Enterococcus spp., respectively. Additionally, a further nine (56%, eight (50%, six (37%, and four (25% brands were PCR positive for A. hydrophila lip, P. aeruginosa ETA, Salmonella spp. invA, and Shigella spp. ipaH genes, respectively. The numbers of bacterial pathogens in bottled water samples ranged from 28 ± 12 to 600 ± 45 (A. hydrophila lip gene, 180 ± 40 to 900 ± 200 (Salmonella spp. invA gene, 180 ± 40 to 1,300 ± 400 (P. aeruginosa ETA gene genomic units per L of water. Shigella spp. ipaH gene was not quantifiable. Discrepancies were observed in terms of the occurrence of fecal indicators and bacterial pathogens. No correlations were observed between fecal indicators numbers and presence/absence of A. hydrophila lip (p = 0.245, Salmonella spp. invA (p = 0.433, Shigella spp. ipaH gene (p = 0.078, and P. aeruginosa ETA (p = 0.059 genes. Our results suggest that microbiological quality of bottled waters sold in Dhaka, Bangladesh is highly variable. To protect public health, stringent quality control is recommended for the bottled water industry in Bangladesh.

  5. Leaching of styrene and other aromatic compounds in drinking water from PS bottles

    Institute of Scientific and Technical Information of China (English)

    Maqbool Ahmad; Ahmad S.Bajahlan

    2007-01-01

    Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene (PS) bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as "purge and trap" and analysed by gas chromatograph-mass spectrometer (GC/MS). Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage time. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.

  6. Fluoride Content of Bottled Drinking Water Available in North West of Iran

    Directory of Open Access Journals (Sweden)

    Reza Fouladi Fard

    2015-06-01

    Full Text Available Background: Consumption of bottled waters has received popularity and more acceptances. Fluoride is necessary for human life. But high levels of fluoride can cause some problems for human health such as Fluorosis and teeth and bones problems. The aim of this study is measure the fluoride content in bottled waters consumed in North West of Iran and comparison with the amount listed on their labels and with the drinking water standards. Methods: In this study, 10 brands of bottled water were sampled from markets over the two seasons randomly. Samples were analyzed for fluoride using Ion Chromatography (IC method. Results: Results showed that fluoride concentration in different brands had a significant difference (P <0.05. The concentration of fluoride in samples ranged between 0.04 and 0.32 mg/L. Among analyzed selected brands four brands were observed significant differences with the measured values. Conclusion:  Totally the measured values didn’t match with the values declared on the labels (Reliability coefficient <0. It was revealed that fluoride concentration in all brands was less than the lower range of Iranian national standard (0.7-1.2 mg/lit.

  7. Comparison of different concentration methods for the detection of hepatitis A virus and calicivirus from bottled natural mineral waters

    DEFF Research Database (Denmark)

    Di Pasquale, S.; Paniconi, M; Auricchio, B

    2010-01-01

    To evaluate the efficiency of different recovery methods of viral RNA from bottled water, a comparison was made of 2 positively and 2 negatively charged membranes that were used for absorbing and releasing HAV virus particles during the filtration of viral spiked bottled water. All the 4 membranes......, regardless of charge and pore size, had low level viral recovery. The results show that a considerable number of the virus particles passed through the pores of the membranes instead of being trapped by the electrostatic charges. Two different procedures were then compared using 1.5 L polyethylene bottles...

  8. Bacteriological evaluation of packaged bottled water sold at Jaipur city and its public health significance

    Directory of Open Access Journals (Sweden)

    Ruchi Tripathi

    2013-02-01

    Full Text Available Aim: The study was carried out to investigate the microbiological quality of packaged drinking water marketed in Jaipur city. Material and Methods: In the present study 'twenty' drinking water samples (15 water bottles and 5 sachets of different brands purchased randomly, were evaluated to access the water quality on the basis of different bacteriological parameters. Result: Out of twenty, 50% samples were found unsatisfactory in standard plate count. Psychrophillic, coliforms, E. coli and staphylococcal counts revealed that 25%, 45%, 20%, and 5% samples respectively were found unfit for human consumption as per Bureau of Indian Standards (BIS of drinking water. On the basis of results of overall microbiological assessment 55% of samples proved to be unfit for consumption. All brands of water sachet (100% had high coliforms count which indicates faecal contamination. Amongst those sachets two brands (40% had presence of E. coli and all the sachet water brands fell below drinking water standards while out of fifteen brands of bottled water 6 samples contained higher microbiological value hence unfit for human consumption. Conclusion: Local brands of packaged drinking water were found unfit for human condumption. So it is suggested that government should intensify the efforts in the monitoring of activities in this rapidly expanding industry with a view to supply potable and wholesome water to the public. [Vet World 2013; 6(1.000: 27-30

  9. Hydrogeochemical approach to estimate the quality of bottled waters in Serbia

    Directory of Open Access Journals (Sweden)

    Ćuk Marina D.

    2016-01-01

    Full Text Available Bottled waters were analyzed for different chemical parameters and activity concentrations of radionuclides. The hydrocarbonate ion was dominant in all samples, while the major cation composition was a combination of Ca-Mg-Na ions. Physicochemical properties of bottled water samples are influenced by underlying geology. The sum of trace element concentrations varied from 79.7 to 9349.7 μg/l. The Dietary Reference Intake (DRI system was applied and contributions of some essential elements were calculated according to age group and gender. Hierarchical Cluster Analysis (HCA grouped bottled water samples into four clusters based on the similarities of the groundwater quality and essential elements concentrations. The origin of radioactivity is natural and could be traced to minerals in felsic igneous rocks. Two brands exhibited elevated beta activity (1.087±0.134 Bq/l; 1.242±0.146 Bq/l. Effective doses were found to be below the reference level of 0.1 mSv/yr. [Projekat Ministarstva nauke Republike Srbije, br. III 43004

  10. Presence of polychlorinated biphenyls (PCBs) in bottled drinking water in Mexico City.

    Science.gov (United States)

    Salinas, Rutilio Ortiz; Bermudez, Beatriz Schettino; Tolentino, Rey Gutiérrez; Gonzalez, Gilberto Díaz; Vega y León, Salvador

    2010-10-01

    This paper describes the concentrations of seven polychlorinated biphenyls (PCBs) in bottled drinking water samples that were collected over 1 year from Mexico City in two sizes (1.5 and 19 L), using gas chromatography with an electron capture detector. PCBs 28 (0.018-0.042 μg/L), 52 (0.006-0.015 μg/L) and 101 (0.001-0.039 μg/L) were the most commonly found and were present in the majority of the samples. However, total concentrations of PCBs in bottled drinking water (0.035-0.039 μg/L) were below the maximum permissible level of 0.50 μg/L stated in Mexican regulations and probably do not represent a hazard to human health. PCBs were detectable in all samples and we recommend a monitoring program be established to better understand the quality of drinking bottled water over time; this may help in producing solutions for reducing the presence of organic contaminants.

  11. Natural radioactivity in bottled mineral and thermal spring waters of Turkey.

    Science.gov (United States)

    Taskin, Halim; Asliyuksek, Hizir; Bozkurt, Ahmet; Kam, Erol

    2013-12-01

    Radiological assessment of bottled mineral waters and thermal spring waters collected from various natural sources in Turkey was carried out using gross alpha and gross beta counting techniques. For 40 samples of bottled mineral water, the mean gross alpha activity concentration was determined to be 164 mBq l(-1) (min.:7 mBq l(-1); max.: 3042 mBq l(-1)), whereas the gross beta activity concentration was found to be 555 mBq l(-1) (min.: 21 mBq l(-1); max.: 4845 mBq l(-1)). For 24 samples of thermal spring water, the mean gross alpha activity concentration was obtained to be 663 mBq l(-1) (min.: 18 mBq l(-1); max.: 3070 mBq l(-1)). The gross beta activity concentration for these samples, on the other hand, was determined to be 3314 mBq l(-1) (min.: 79 mBq l(-1); max.: 17955 mBq l(-1)). These values lead to the average annual effective doses of 313 µSv for mineral waters and 1805 µSv for thermal spa waters, which are found to be higher than those recommended for drinking waters by the World Health Organization. It should be noted, however, that one will get less dose from mineral waters since the daily consumption is much lower than 2 l that these calculations assume.

  12. Detection of Helicobacter pylori in City Water, Dental Units' Water, and Bottled Mineral Water in Isfahan, Iran

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Bahrami

    2013-01-01

    Full Text Available Helicobacter pylori infection in human is one of the most common infections worldwide. However, the origin and transmission of this bacterium has not been clearly explained. One of the suggested theories is transmission via water. This study was conducted to determine the prevalence rate of H. pylori in tap water, dental units' water, and bottled mineral water in Iran. In the present study, totally 200 water samples were collected in Isfahan province and tested for H. pylori by cultural method and polymerase chain reaction (PCR by the detection of the ureC (glmM gene. Using cultural method totally 5 cultures were positive. Two out of 50 tap water samples (4%, 2 out of 35 dental units' water (5.8% samples, and 1 out of 40 (2.5% from water cooler in public places were found to be contaminated with H. pylori. H. pylori ureC gene was detected in 14 (7% of water samples including 5 tap water (10%, 4 dental units' water (11.4%, 1 refrigerated water with filtration, and 4 (10% water cooler in public places samples. This may be due to the coccoid form of bacteria which is detected by PCR method.

  13. A novel method for concentrating hepatitis A virus and caliciviruses from bottled water

    DEFF Research Database (Denmark)

    Kovač, K; Gutiérrez-Aguirre, I; Banjac, M

    2009-01-01

    amine) monolithic columns were used for binding of HAV and FCV present in previously inoculated 1.5 l bottled water samples. Column bound viruses were eluted from the monolith using 1 M NaCl to a final volume of 15 ml. Elution volume was concentrated further by ultracentrifugation. When the CIM......Human enteric viruses are detected frequently in various types of environmental water samples, such as irrigation water, wastewater, recreational water, ground or subsurface water and even drinking water, constituting a primary source of gastroenteritis or hepatitis outbreaks. Only a few, but still...... infective number of viral particles are normally present in water samples, therefore an efficient virus concentration procedure is essential prior to molecular detection of the viral nucleic acid. In this study, a novel chromatographic technology, Convective Interaction Media®(CIM) monolithic supports, were...

  14. [Moulds and yeasts in bottled water and soft drinks].

    Science.gov (United States)

    Ancasi, E G; Carrillo, L; Benítez Ahrendts, M R

    2006-01-01

    Some damaged cartons of soft drinks and carbonated water were analyzed to detect the microorganisms that caused the damage. The contaminants of sugar used in the production of one of the drinks were also studied. The methods of Déak & Beuchat and Pitt & Hocking were used for the identification of yeasts and moulds, respectively. The agents of the spoilage of soft drinks were Debaryomyces hansenii, Debaryomyces polymorphus, Galactomyces geotrichum, Metschnikowia pulcherrima, Mucor circinelloides, Pichia anomala, Pichia jadinii, Pichia subpelliculosa, Rhodotorula glutinis and Zygosaccharomyces bailii. The microorganisms found in sugar were Aspergillus niger, Aspergillus penicilloides, Aspergillus versicolor, Cladosporium sphaerospermum, Mucor racemosus, P. anomala and Rhizopus stolonifer. Paecilomyces fulvus and Penicillium glabrum were observed in carbonated water.

  15. Quantitative Determination of Arsenic in Bottled Drinking Water Using Atomic Absorption Spectroscopy

    Directory of Open Access Journals (Sweden)

    Maria Guţu Claudia

    2013-10-01

    Full Text Available Background: Many studies have been performed in the past few years, to determine arsenic speciation in drinking water, food chain and environment, arsenic being a well-recognized carcinogenic and toxic agent mainly in its inorganic species. The instrumental techniques used for arsenic determination, such as hydride generation atomic absorption spectrometry (HGAAS, graphite furnace atomic absorption spectrometry (GFAAS and inductively coupled plasma mass spectrometry (ICP-MS, can provide a great sensitivity only on the total amount. Objective: The aim of this study was to develop a simple and rapid method and to analyze the concentration of total inorganic arsenic in bottled drinking water. Methods: Total arsenic was determined in samples from six different types of commercially available bottled drinking water using atomic absorption spectrometry with electrothermal or hydride generation vaporisation. All drinking water samples were acidified with 0.1M nitric acid to match the acidity of the standards. Results: The method was linear within the studied range (1-5 μg/L, R = 0.9943. The quantification limits for arsenic determination were 0.48 μg/L (HGAAS and 0.03 μg/L (GFAAS. The evaluated arsenic content in drinking water was within the accepted limits provided by law. Conclusions: A simple and sensitive method for the quantification of arsenic in drinking water using atomic absorbtion spectroscopy was described, which can be further used in toxicological studies. As an additional advantage, the system is very fast, efficient and environmental friendly

  16. Study on the leaching of phthalates from polyethylene terephthalate bottles into mineral water

    Energy Technology Data Exchange (ETDEWEB)

    Keresztes, Szilvia; Tatár, Enikő [Laboratory of Environmental Chemistry and Bioanalytics, Department of Analytical Chemistry, Institute of Chemistry, Eötvös Loránd University, H-1117 Budapest, Pázmány Péter sétány 1/A (Hungary); Czégény, Zsuzsanna [Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Hungarian Academy of Sciences, H-1525 Budapest, P.O. Box 17 (Hungary); Záray, Gyula [Laboratory of Environmental Chemistry and Bioanalytics, Department of Analytical Chemistry, Institute of Chemistry, Eötvös Loránd University, H-1117 Budapest, Pázmány Péter sétány 1/A (Hungary); Mihucz, Victor G., E-mail: vigami72@yahoo.es [Laboratory of Environmental Chemistry and Bioanalytics, Department of Analytical Chemistry, Institute of Chemistry, Eötvös Loránd University, H-1117 Budapest, Pázmány Péter sétány 1/A (Hungary)

    2013-08-01

    Carbonated and non-carbonated mineral water samples bottled in 0.5-L, 1.5-L and 2.0-L polyethylene terephthalate (PET) containers belonging to three different water brands commercialized in Hungary were studied in order to determine their phthalate content by gas chromatography–mass spectrometry. Among the six investigated phthalates, diisobutyl phthalate, di-n-butyl-phthalate, benzyl-butyl phthalate and di(2-ethyl-hexyl) phthalate (DEHP) were determined in non-carbonated samples as follows: < 3.0 ng L{sup −1}–0.2 μg L{sup −1}, < 6.6 ng L{sup −1}–0.8 μg L{sup −1}, < 6.0 ng L{sup −1}–0.1 μg L{sup −1} and < 16.0 ng L{sup −1}–1.7 μg L{sup −1}, respectively. Any of the above-mentioned phthalate esters could be detected in carbonated mineral water samples. DEHP was the most abundant phthalate in the investigated samples. It could be detected after 44 days of storage at 22 °C and its leaching was the most pronounced when samples were stored over 1200 days. Mineral water purchased in PET bottles of 0.5 L had the highest phthalate concentrations compared to those obtained for waters of the identical brand bottled in 1.5-L or 2.0-L PET containers due to the higher surface/volume ratio. No clear trend could be established for phthalate leaching when water samples were kept at higher temperatures (max. 60 °C) showing improper storage conditions. Phthalate determination by pyrolysis–gas chromatography/mass spectrometric measurements in the plastic material as well as in the aqueous phase proved the importance of the quality of PET raw material used for the production of the pre-form (virgin vs. polymer containing recycled PET). - Highlights: • DEHP — most abundant phthalate in bottled mineral water • Temperature and contact surface area influence phthalate leaching. • Phthalate occurrence depends on virgin vs. polymer containing recycled PET. • pH (carbonated vs. non-carbonated samples) affects hydrolysis of phthalate esters.

  17. Leaching of antimony from polyethylene terephthalate (PET) bottles into mineral water

    Energy Technology Data Exchange (ETDEWEB)

    Keresztes, Szilvia [Department of Analytical Chemistry, Institute of Chemistry, L. Eoetvoes University, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Tatar, Eniko; Mihucz, Victor G. [Department of Analytical Chemistry, Institute of Chemistry, L. Eoetvoes University, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Hungarian Satellite Institute of Trace Elements for UNESCO, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Sino-Hungarian Joint Laboratory of Environmental Sciences and Health, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Virag, Istvan [Department of Analytical Chemistry, Institute of Chemistry, L. Eoetvoes University, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Majdik, Cornelia [Department of Biochemistry and Biochemical Engineering, Babes-Bolyai University, R-3400 Cluj, Str. Arany Janos 11 (Romania); Zaray, Gyula, E-mail: zaray@ludens.elte.hu [Department of Analytical Chemistry, Institute of Chemistry, L. Eoetvoes University, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Hungarian Satellite Institute of Trace Elements for UNESCO, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary); Sino-Hungarian Joint Laboratory of Environmental Sciences and Health, H-1117 Budapest, Pazmany Peter setany 1/A (Hungary)

    2009-08-01

    The Sb leaching from polyethylene terephthalate (PET) package material into 10 different brands of still (non-carbonated) and sparkling (carbonated) Hungarian mineral water purchased in supermarkets was investigated by inductively coupled plasma sector field mass spectrometry (ICP-SF-MS). The Sb concentration measured in PET package materials varied between 210 and 290 mg/kg. Generally, the Sb concentration of still mineral water was lower than that of sparkling in the case of identical storage time. For modelling improper storage conditions, storage time (10-950 days), temperature (22 {sup o}C-70 {sup o}C), illumination (dark vs. 23 W daylight lamp for 116 h) as well as bottle volume (0.5, 1.0 and 1.5 L) were taken into consideration. Under certain extreme light and temperature storage conditions, the Sb concentration of some samples exceeded the concentration value of 2 ng/mL. The extent of Sb leaching from the PET recipients of different brands of mineral water can differ by even one order of magnitude in experiments conducted under the same conditions. Thus, the adequate selection of the polymer used for the production of the PET bottle for the solar water disinfection (SODIS) procedure seems to ensure low Sb levels in the water samples.

  18. Assessing human exposure to phthalic acid and phthalate esters from mineral water stored in polyethylene terephthalate and glass bottles.

    Science.gov (United States)

    Montuori, P; Jover, E; Morgantini, M; Bayona, J M; Triassi, M

    2008-04-01

    Phthalic acid and phthalate esters are of growing interest due to their significant usage and potential toxicity. Polyethylene terephthalate (PET) and glass are both widely used materials for bottled drinking water. In this study, phthalic acid (PhA), bis(2-ethylhexyl) phthalate (DEHP), dimethyl phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DiisoBP) and dibutyl phthalate (DBP) were analysed in a large number of Italian bottled water samples. These samples showed different concentrations of phthalates are nearly 20 times higher in samples bottled in PET than those from glass bottles with total levels of phthalates of 3.52 and 0.19 microg l(-1), respectively. However, the observed levels do not represent a significant exposure pathway when considering the US Environmental Protection Agency (USEPA) reference dose (an estimate of a daily oral exposure to the human population, including sensitive subgroups, that is likely to be without an appreciable risk of deleterious effects during a lifetime). In addition, no significant correlation was found between the phthalate concentrations and the physicochemical properties of the different water samples, apart from the still/sparkling water parameter for the PET samples. In this instance, slightly higher concentrations were observed for the PET bottled still water samples than for the sparkling water samples, although no explanation has been found yet.

  19. Effective Dose of Radon 222 Bottled Water in Different Age Groups Humans: Bandar Abbas City, Iran.

    Science.gov (United States)

    Fakhri, Yadolah; Mahvi, Amir Hossein; Langarizadeh, Ghazaleh; Zandsalimi, Yahya; Amirhajeloo, Leila Rasouli; Kargosha, Morteza; Moradi, Mahboobeh; Moradi, Bigard; Mirzaei, Maryam

    2015-06-04

    Radon 222 is a natural radioactive element with a half-life of 3.8 days. It is odorless and colorless as well as water-soluble. Consuming waters which contain high concentration of 222Rn would increase the effective dose received by different age groups. It would also be followed by an increased prevalence of cancer. In this research, 72 samples of the most commonly used bottled water in Bandar Abbas were collected in 3 consecutive months, May, June and July of 2013. Concentration 222Rn of was measured by radon-meter model RTM166-2. The effective dose received by the 4 age groups, male and female adults as well as children and infants was estimated using the equation proposed by UNSCEAR. The results revealed that the mean and range concentration of 222Rn in bottled waters were 641±9 Bq/m3 and 0-901 Bq/m3, respectively. The mean concentration of 222Rn in the well-known Marks followed this Zam Zam>Bishe>Koohrng>Dassani>Christal>Polour>Damavand>Sivan. Infants were observed to receive a higher effective dose than children. The highest and lowest effective dose received was found to belong to male adults and children, respectively.

  20. Trace elements and heavy metals in mineral and bottled drinking waters on the Iranian market.

    Science.gov (United States)

    Hadiani, Mohammad Rasoul; Dezfooli-Manesh, Shirin; Shoeibi, Shahram; Ziarati, Parisa; Mousavi Khaneghah, Amin

    2015-01-01

    A survey of Iranian waters, sampled from 2010 to 2013, is presented. A total of 128 water samples from 42 different brands of bottled mineral and drinking water were collected and analysed for contamination levels of lead (Pb), cadmium (Cd), copper (Cu), arsenic (As) and mercury (Hg). Determinations were performed using a graphite furnace atomic absorption spectrophotometer for Pb, Cd and Cu, a hydride vapour generation as well as an Arsenator digital kit (Wagtech WTD, Tyne and Wear, UK) for As and a direct mercury analyser for Hg. Arsenic concentration in six bottled gaseous mineral samples was higher than the related limit. Regardless of these, mean concentrations of Pb, Cd, Cu, As and Hg in all types of water samples were 4.50 ± 0.49, 1.08 ± 0.09, 16.11 ± 2.77, 5.80 ± 1.63 and 0.52 ± 0.03 µg L⁻¹, respectively. Values obtained for analysed heavy metals in all samples were permissible according to the limits of national and international standards.

  1. Chemical compounds and toxicological assessments of drinking water stored in polyethylene terephthalate (PET) bottles: A source of controversy reviewed.

    Science.gov (United States)

    Bach, Cristina; Dauchy, Xavier; Chagnon, Marie-Christine; Etienne, Serge

    2012-03-01

    A declaration of conformity according to European regulation No. 10/2011 is required to ensure the safety of plastic materials in contact with foodstuffs. This regulation established a positive list of substances that are authorized for use in plastic materials. Some compounds are subject to restrictions and/or specifications according to their toxicological data. Despite this, the analysis of PET reveals some non-intentionally added substances (NIAS) produced by authorized initial reactants and additives. Genotoxic and estrogenic activities in PET-bottled water have been reported. Chemical mixtures in bottled water have been suggested as the source of these toxicological effects. Furthermore, sample preparation techniques, such as solid-phase extraction (SPE), to extract estrogen-like compounds in bottled water are controversial. It has been suggested that inappropriate extraction methods and sample treatment may result in false-negative or positive responses when testing water extracts in bioassays. There is therefore a need to combine chemical analysis with bioassays to carry out hazard assessments. Formaldehyde, acetaldehyde and antimony are clearly related to migration from PET into water. However, several studies have shown other theoretically unexpected substances in bottled water. The origin of these compounds has not been clearly established (PET container, cap-sealing resins, background contamination, water processing steps, NIAS, recycled PET, etc.). Here, we surveyed toxicological studies on PET-bottled water and chemical compounds that may be present therein. Our literature review shows that contradictory results for PET-bottled water have been reported, and differences can be explained by the wide variety of analytical methods, bioassays and exposure conditions employed.

  2. The water cycle in a bottle: simulation of a hydrogeological basin

    Science.gov (United States)

    Nebot Castelló, M. R.; Leiva Hevia, S.

    2012-04-01

    THE WATER CYCLE IN A BOTTLE: simulation of a hydrogeological basin Author: Mª Roser Nebot (Institut Manuel Blancafort, La Garriga, Barcelona, Spain) Co-author: Sílvia Leiva Hevia (Institut Llicà d'Amunt, Lliça d'Amunt, Barcelona, Spain) The activity can be implemented in a great range of ages, because it has many different levels of depth. It is based on the construction of an analogical model of a hydrogeological basin using a 5L or 8L empty bottle. There are also other hands-on experiences that can be done in relation to the central one, such as creating a fountain, making a cloud, fog, a breeze… The use of a model that the students have to build and interact with enhances the possibility of cooperative and dialogic learning. The set of activities begins with an introduction to see what the students know about the water cycle and to focus on what they are going to work on. It also makes them think about underground water, which is frequently forgotten when drawing and studying the water cycle. Then, the building of the water cycle simulation from an empty bottle is presented, see http://www.xtec.cat/cirel/pla_le/nottingham/roser_nebot/index.htm (Unit 5). You will also find other activities related to the water cycle at the site. The students build the model, water the soil, and observe infiltration and the formation of a lake. Using a syringe they overexploit the well and dry the lake. By making the students label the underground water level and observe how water percolates through the holes in the aquifer we are making them aware that underground water doesn't circulate in rivers inside underground tunnels, but through the interconnected holes and crevices. Inside the bottle there is a little plant to observe evapotranspiration but, because it is very difficult to see the water droplets in the small plant that is inside the set-up, it is advisable to do a parallel experiment using bigger plants in a pot, covering them with a plastic bag tied around the

  3. Acid-base balance and hydration status following consumption of mineral-based alkaline bottled water

    Directory of Open Access Journals (Sweden)

    Heil Daniel P

    2010-09-01

    Full Text Available Abstract Background The present study sought to determine whether the consumption of a mineral-rich alkalizing (AK bottled water could improve both acid-base balance and hydration status in young healthy adults under free-living conditions. The AK water contains a naturally high mineral content along with Alka-PlexLiquid™, a dissolved supplement that increases the mineral content and gives the water an alkalizing pH of 10.0. Methods Thirty-eight subjects were matched by gender and self-reported physical activity (SRPA, hrs/week and then split into Control (12 women, 7 men; Mean +/- SD: 23 +/- 2 yrs; 7.2 +/- 3.6 hrs/week SRPA and Experimental (13 women, 6 men; 22 +/- 2 yrs; 6.4 +/- 4.0 hrs/week SRPA groups. The Control group consumed non-mineralized placebo bottled water over a 4-week period while the Experimental group consumed the placebo water during the 1st and 4th weeks and the AK water during the middle 2-week treatment period. Fingertip blood and 24-hour urine samples were collected three times each week for subsequent measures of blood and urine osmolality and pH, as well as total urine volume. Dependent variables were analyzed using multivariate repeated measures ANOVA with post-hoc focused on evaluating changes over time within Control and Experimental groups (alpha = 0.05. Results There were no significant changes in any of the dependent variables for the Control group. The Experimental group, however, showed significant increases in both the blood and urine pH (6.23 to 7.07 and 7.52 to 7.69, respectively, a decreased blood and increased urine osmolality, and a decreased urine output (2.51 to 2.05 L/day, all during the second week of the treatment period (P Conclusions Consumption of AK water was associated with improved acid-base balance (i.e., an alkalization of the blood and urine and hydration status when consumed under free-living conditions. In contrast, subjects who consumed the placebo bottled water showed no changes over the

  4. How consumers of plastic water bottles are responding to environmental policies?

    Science.gov (United States)

    Orset, Caroline; Barret, Nicolas; Lemaire, Aurélien

    2017-03-01

    Although plastic induces environmental damages, almost all water bottles are made from plastic and the consumption never stops increasing. This study evaluates the consumers' willingness to pay (WTP) for different plastics used for water packaging. Successive messages emphasizing the characteristics of plastic are delivered to consumers allowing explaining the influence of information on the consumers' WTP. We find that information has a manifest effect on the WTP. We show there is a significant premium associated with recycled plastic packaging and biodegradable bioplastic packaging. As there is no consensus on the plastic which is the most or the least dangerous for the environment, we propose different policies for protecting the environment. We discuss about the impact of these policies on consumer's purchasing decisions: switching one plastic packaging for another, or leaving water plastic bottles market. We present the environmental policies that are effective according to the point of view adopted. Choosing between these policies then depends on the priorities of the regulator and pressure of lobbies.

  5. 市售瓶装水的VOCs抽查分析%VOCs Spot Check of Bottled Drinking Water in Market

    Institute of Scientific and Technical Information of China (English)

    徐正生; 程燕; 汤婕

    2012-01-01

    [ Objective ] The aim was to know the quality of bottled drinking water in market, which will provide reference for improving bottled water supervision. [ Method] The VOCs content of bottled drinking water in Hefei City was detected, six brands fifteen kinds of bottled water were selected to analyze VOCs content according to American EPA524. 2. [ Result] Among fifteen bottled water samples, micro chloroform were detected in six samples, micro benzene were detected in two samples. [ Conclusion ] The pollution pathway of bottled drinking water is related with production process, including water source quality, disinfection process, transportation and storage conditions.%[目的]了解市场上瓶装水的质量,为完善对瓶装水的监管提供参考.[方法]检验合肥市零售的瓶装饮用水挥发性有机物(VOCs)含量,抽取了6个品牌共15种规格不同的市售瓶装水,参照美国EPA524.2方法进行VOCs检测分析.[结果]抽查的15种瓶装饮用水样品中,有6种样品检出含有微量三氯甲烷,2种样品检出含微量苯.[结论]市售瓶装饮用水的污染途径应与瓶装水的生产工序相关,包括水源质量、消毒工序、运输以及储存条件等.

  6. Policy Brief: Enhancing water-use efficiency of thermal power plants in India: need for mandatory water audits

    Energy Technology Data Exchange (ETDEWEB)

    Batra, R.K. (ed.)

    2012-12-15

    This policy brief discusses the challenges of water availability and opportunity to improve the water use efficiency in industries specially the thermal power plants. It presents TERI’s experience from comprehensive water audits conducted for thermal power plants in India. The findings indicate that there is a significant scope for saving water in the waste water discharge, cooling towers, ash handling systems, and the township water supply. Interventions like recycling wastewater, curbing leakages, increasing CoC (Cycles of concentration) in cooling towers, using dry ash handling etc., can significantly reduce the specific water consumption in power plants. However, the first step towards this is undertaking regular water audits. The policy brief highlights the need of mandatory water audits necessary to understand the current water use and losses as well as identify opportunities for water conservation, reduction in specific water consumption, and an overall improvement in water use efficiency in industries.

  7. Identification of Putative Steroid Receptor Antagonists in Bottled Water: Combining Bioassays and High-Resolution Mass Spectrometry

    Science.gov (United States)

    Wagner, Martin; Schlüsener, Michael P.; Ternes, Thomas A.; Oehlmann, Jörg

    2013-01-01

    Endocrine disrupting chemicals (EDCs) are man-made compounds interfering with hormone signaling and thereby adversely affecting human health. Recent reports provide evidence for the presence of EDCs in commercially available bottled water, including steroid receptor agonists and antagonists. However, since these findings are based on biological data the causative chemicals remain unidentified and, therefore, inaccessible for toxicological evaluation. Thus, the aim of this study is to assess the antiestrogenic and antiandrogenic activity of bottled water and to identify the causative steroid receptor antagonists. We evaluated the antiestrogenic and antiandrogenic activity of 18 bottled water products in reporter gene assays for human estrogen receptor alpha and androgen receptor. Using nontarget high-resolution mass spectrometry (LTQ-Orbitrap Velos), we acquired corresponding analytical data. We combined the biological and chemical information to determine the exact mass of the tentative steroid receptor antagonist. Further MSn experiments elucidated the molecule’s structure and enabled its identification. We detected significant antiestrogenicity in 13 of 18 products. 16 samples were antiandrogenic inhibiting the androgen receptor by up to 90%. Nontarget chemical analysis revealed that out of 24520 candidates present in bottled water one was consistently correlated with the antagonistic activity. By combining experimental and in silico MSn data we identified this compound as di(2-ethylhexyl) fumarate (DEHF). We confirmed the identity and biological activity of DEHF and additional isomers of dioctyl fumarate and maleate using authentic standards. Since DEHF is antiestrogenic but not antiandrogenic we conclude that additional, yet unidentified EDCs must contribute to the antagonistic effect of bottled water. Applying a novel approach to combine biological and chemical analysis this is the first study to identify so far unknown EDCs in bottled water. Notably

  8. Identification of putative steroid receptor antagonists in bottled water: combining bioassays and high-resolution mass spectrometry.

    Directory of Open Access Journals (Sweden)

    Martin Wagner

    Full Text Available Endocrine disrupting chemicals (EDCs are man-made compounds interfering with hormone signaling and thereby adversely affecting human health. Recent reports provide evidence for the presence of EDCs in commercially available bottled water, including steroid receptor agonists and antagonists. However, since these findings are based on biological data the causative chemicals remain unidentified and, therefore, inaccessible for toxicological evaluation. Thus, the aim of this study is to assess the antiestrogenic and antiandrogenic activity of bottled water and to identify the causative steroid receptor antagonists. We evaluated the antiestrogenic and antiandrogenic activity of 18 bottled water products in reporter gene assays for human estrogen receptor alpha and androgen receptor. Using nontarget high-resolution mass spectrometry (LTQ-Orbitrap Velos, we acquired corresponding analytical data. We combined the biological and chemical information to determine the exact mass of the tentative steroid receptor antagonist. Further MS(n experiments elucidated the molecule's structure and enabled its identification. We detected significant antiestrogenicity in 13 of 18 products. 16 samples were antiandrogenic inhibiting the androgen receptor by up to 90%. Nontarget chemical analysis revealed that out of 24520 candidates present in bottled water one was consistently correlated with the antagonistic activity. By combining experimental and in silico MS(n data we identified this compound as di(2-ethylhexyl fumarate (DEHF. We confirmed the identity and biological activity of DEHF and additional isomers of dioctyl fumarate and maleate using authentic standards. Since DEHF is antiestrogenic but not antiandrogenic we conclude that additional, yet unidentified EDCs must contribute to the antagonistic effect of bottled water. Applying a novel approach to combine biological and chemical analysis this is the first study to identify so far unknown EDCs in bottled water

  9. Assessing arsenic exposure in households using bottled water or point-of-use treatment systems to mitigate well water contamination.

    Science.gov (United States)

    Smith, Andrew E; Lincoln, Rebecca A; Paulu, Chris; Simones, Thomas L; Caldwell, Kathleen L; Jones, Robert L; Backer, Lorraine C

    2016-02-15

    There is little published literature on the efficacy of strategies to reduce exposure to residential well water arsenic. The objectives of our study were to: 1) determine if water arsenic remained a significant exposure source in households using bottled water or point-of-use treatment systems; and 2) evaluate the major sources and routes of any remaining arsenic exposure. We conducted a cross-sectional study of 167 households in Maine using one of these two strategies to prevent exposure to arsenic. Most households included one adult and at least one child. Untreated well water arsenic concentrations ranged from arsenic and untreated well water arsenic concentration, while accounting for documented consumption of untreated water and dietary sources. If mitigation strategies were fully effective, there should be no relationship between urinary arsenic and well water arsenic. To the contrary, we found that untreated arsenic water concentration remained a significant (p ≤ 0.001) predictor of urinary arsenic levels. When untreated water arsenic concentrations were arsenic was no longer a significant predictor of urinary arsenic. Time spent bathing (alone or in combination with water arsenic concentration) was not associated with urinary arsenic. A predictive analysis of the average study participant suggested that when untreated water arsenic ranged from 100 to 500 μg/L, elimination of any untreated water use would result in an 8%-32% reduction in urinary arsenic for young children, and a 14%-59% reduction for adults. These results demonstrate the importance of complying with a point-of-use or bottled water exposure reduction strategy. However, there remained unexplained, water-related routes of exposure. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Determination of nitrate and nitrite exposure and their health risk assessment in 21 brands of bottled waters in Isfahan′s market in 2013

    Directory of Open Access Journals (Sweden)

    Malihe Moazeni

    2014-01-01

    Conclusion: According to the results of the present study, nitrate and nitrite levels in the studied bottled waters were not found in concentrations considered hazardous in terms of public health. The label values not provide reliable data for consumer. The health risk of bottled water consumers from nitrate and nitrite exposure in Isfahan were in the acceptable range.

  11. An outbreak of acute gastroenteritis associated with contaminated bottled water in a university – Jiangxi, China, 2012

    Directory of Open Access Journals (Sweden)

    Guang Zeng

    2012-11-01

    Full Text Available Background: On 23 May 2012, a university in Jiangxi, China reported a gastroenteritis outbreak. We investigated the outbreak to identify the agent, source and mode of transmission and to recommend control measures.Methods: A case was defined as any person from the university with onset of diarrhoea (≥3 times/24h from 1 to 31 May 2012. Active case finding was conducted by reviewing university hospital and drug-store records and interviewing students, workers and teachers. We then conducted a case-control study in which we compared food, water and environmental exposure history. Water samples were collected and tested.Results: We identified 417 cases – an attack rate (AR of 4.7% (417/8781 for the university. There were 416 student cases (AR = 5.7% distributed across all 11 colleges, five of which were more heavily affected (AR range = 5.9%–14%. In the case-control study, cases had higher odds of having drunk bottled water (odds ratio [OR] = 4.1; 95% confidence interval [CI] = 1.7–9.9, and there was a dose–response relationship (X 2 trend = 4.6, P < 0.05. Drinking boiled bottled water was inversely associated with being a case (OR = "0.22," 95% CI = "0.07–0.71." Eating in any of the three university canteens or drinking water from the city water supply was not associated with being a case. Pathogenic Escherichia coli was isolated from two unopened bottled water specimens and from four student cases.Conclusion: This gastroenteritis outbreak was most likely caused by contaminated bottled water. The company in question has been shut down and no further cases have been reported. Increased regulation of bottled water plants and better coordination between different investigators for future outbreaks is recommended.

  12. Measurement of natural radionuclides in Malaysian bottled mineral water and consequent health risk estimation

    Energy Technology Data Exchange (ETDEWEB)

    Priharti, W.; Samat, S. B.; Yasir, M. S. [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

    2015-09-25

    The radionuclides of {sup 226}Ra, {sup 232}Th and {sup 40}K were measured in ten mineral water samples, of which from the radioactivity obtained, the ingestion doses for infants, children and adults were calculated and the cancer risk for the adult was estimated. Results showed that the calculated ingestion doses for the three age categories are much lower than the average worldwide ingestion exposure of 0.29 mSv/y and the estimated cancer risk is much lower than the cancer risk of 8.40 × 10{sup −3} (estimated from the total natural radiation dose of 2.40 mSv/y). The present study concludes that the bottled mineral water produced in Malaysia is safe for daily human consumption.

  13. Measurement of natural radionuclides in Malaysian bottled mineral water and consequent health risk estimation

    Science.gov (United States)

    Priharti, W.; Samat, S. B.; Yasir, M. S.

    2015-09-01

    The radionuclides of 226Ra, 232Th and 40K were measured in ten mineral water samples, of which from the radioactivity obtained, the ingestion doses for infants, children and adults were calculated and the cancer risk for the adult was estimated. Results showed that the calculated ingestion doses for the three age categories are much lower than the average worldwide ingestion exposure of 0.29 mSv/y and the estimated cancer risk is much lower than the cancer risk of 8.40 × 10-3 (estimated from the total natural radiation dose of 2.40 mSv/y). The present study concludes that the bottled mineral water produced in Malaysia is safe for daily human consumption.

  14. Hydrocarbons derived from petroleum in bottled drinking water from Mexico City.

    Science.gov (United States)

    Vega, Salvador; Gutiérrez, Rey; Ortiz, Rutilio; Schettino, Beatriz; Ramírez, Maria de Lourdes; Pérez, José Jesus

    2011-06-01

    This paper describes the concentrations of polycyclic aromatic hydrocarbons (PAHs) and aliphatic hydrocarbons (AHs) derived from petroleum in bottled drinking water samples that were collected over 1 year from Mexico City in two bottle sizes (1.5 and 19 L), all brought in supermarkets. The analysis was by gas chromatography with flame ionization detection. -Concentrations of AHs (9.26-1.74 μg/L) were greater than PAHs (20.15-12.78 ng/L). Individual concentrations of PAHs such as fluoranthene, benzo(b)fluoranthene, benzo(k)fluoranthene, indeno(1,2,3-cd)pyrene and benzo(ghi)perylene were comparable with data reported by the World Health Organization (WHO). Total concentrations of PAHs for all samples (BDW1: 12.78 μg/L, BDW2: 16.72 μg/L, BDW3: 14.62 μg/L, BDW4: 20.15 μg/L and BDW5: 13.23 ng/L) were below the maximum permissible European level of 100 ng/L; no regulations exist for AHs although their values were greater than PAHs (BDW1: 3.11 μg/L, BDW2: 8.45 μg/L, BDW3: 1.74 μg/L, BDW4: 4.75 μg/L and BDW5: 9.26 μg/L).

  15. Opportunistic pathogens and elements of the resistome that are common in bottled mineral water support the need for continuous surveillance.

    Directory of Open Access Journals (Sweden)

    Maria Fernanda Falcone-Dias

    Full Text Available Several differences concerning bacterial species, opportunistic pathogens, elements of the resistome as well as variations concerning the CFU/mL counts were identified in some of the five most marketed bottled mineral water from Araraquara city, São Paulo, Brazil. Two out of five brands tested were confirmed as potential source of opportunistic pathogens, including Mycobacterium gordonae, Ralstonia picketti and Burkholderia cepacia complex (Bcc. A total of one hundred and six isolates were recovered from four of these bottled mineral water brands. Betaproteobacteria was predominant followed by Alphaproteobacteria, Gammaproteobacteria and Firmicutes. Ninety percent of the bacteria isolated demonstrated resistance to seventeen of the nineteen antimicrobials tested. These antimicrobials included eight different classes, including 3rd and 4th generation cephalosporins, carbapenems and fluoroquinolones. Multidrug resistant bacteria were detected for fifty-nine percent of isolates in three water brands at counts up to 103 CFU/ml. Of major concern, the two bottled mineral water harboring opportunistic pathogens were also source of elements of the resistome that could be directly transferred to humans. All these differences found among brands highlight the need for continuous bacteriological surveillance of bottled mineral water.

  16. Opportunistic pathogens and elements of the resistome that are common in bottled mineral water support the need for continuous surveillance.

    Science.gov (United States)

    Falcone-Dias, Maria Fernanda; Centrón, Daniela; Pavan, Fernando; Moura, Adriana Candido da Silva; Naveca, Felipe Gomes; de Souza, Victor Costa; Farache Filho, Adalberto; Leite, Clarice Queico Fujimura

    2015-01-01

    Several differences concerning bacterial species, opportunistic pathogens, elements of the resistome as well as variations concerning the CFU/mL counts were identified in some of the five most marketed bottled mineral water from Araraquara city, São Paulo, Brazil. Two out of five brands tested were confirmed as potential source of opportunistic pathogens, including Mycobacterium gordonae, Ralstonia picketti and Burkholderia cepacia complex (Bcc). A total of one hundred and six isolates were recovered from four of these bottled mineral water brands. Betaproteobacteria was predominant followed by Alphaproteobacteria, Gammaproteobacteria and Firmicutes. Ninety percent of the bacteria isolated demonstrated resistance to seventeen of the nineteen antimicrobials tested. These antimicrobials included eight different classes, including 3rd and 4th generation cephalosporins, carbapenems and fluoroquinolones. Multidrug resistant bacteria were detected for fifty-nine percent of isolates in three water brands at counts up to 103 CFU/ml. Of major concern, the two bottled mineral water harboring opportunistic pathogens were also source of elements of the resistome that could be directly transferred to humans. All these differences found among brands highlight the need for continuous bacteriological surveillance of bottled mineral water.

  17. Endocrine disruptor phthalates in bottled water: daily exposure and health risk assessment in pregnant and lactating women.

    Science.gov (United States)

    Jeddi, Maryam Zare; Rastkari, Noushin; Ahmadkhaniha, Reza; Yunesian, Masud

    2016-09-01

    Over the last decade, the consumption of water bottled in polyethylene terephthalate (PET) has considerably increased, raising concerns over water quality and packaged materials. This study aims to investigate the levels of the anti-androgenic phthalates including bis-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), and benzyl butyl phthalate (BBP), in bottled water and its corresponding health risks in pregnant and lactating women. The phthalate levels were measured in six different brands of bottled water exposed to temperatures ranging between -18 and 40 °C and sunlight for 45 days. The phthalate was quantified using the gas chromatography-mass spectrometry (GC-MS). In addition, the non-carcinogenic effects were assessed using hazard quotient (HQ) approach, and cumulative health risk assessment was performed on the basis of hazard index (HI) calculation. In order to assess the carcinogenic risk due to the possible carcinogen DEHP (group 2B), the excess lifetime cancer risk (ELCR) was used. DEHP and DBP contaminants were detected at different storage conditions in all of the bottled water samples during the storage time. BBP was only detected at high temperature (≥25 °C) and outdoor conditions. The maximum concentrations of all phthalates were observed when water samples were kept at 40 °C. In contrast, storage at freezing conditions had no significant effect on the concentration level of all phthalates. The estimated intake by women was between 0.0021 μg/kg/day for BBP and 0.07 μg/kg/day for DEHP. The highest HQ for phthalate intake via bottled water consumption was much lower than 1 (HQ risk assessment for combined phthalate exposure demonstrated that the HIs for anti-androgenic effect were lower than 1 in all of the conditions. Furthermore, ELCR for DEHP based on the highest detected level was found to be less than 10(-6), which is considered acceptable. Our results prove that the levels of phthalates in bottled water are not a health

  18. Impact of temperature and storage duration on the chemical and odor quality of military packaged water in polyethylene terephthalate bottles

    Energy Technology Data Exchange (ETDEWEB)

    Greifenstein, Michael, E-mail: Michael.Greifenstein@us.army.mil [Department of Preventive Medicine and Biometrics, 4301 Jones Bridge Road, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); White, Duvel W., E-mail: duvel.white@us.army.mil [Department of Preventive Medicine and Biometrics, 4301 Jones Bridge Road, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Stubner, Alex, E-mail: alex.stubner@usuhs.edu [Department of Preventive Medicine and Biometrics, 4301 Jones Bridge Road, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Hout, Joseph, E-mail: joseph.hout@usuhs.edu [Department of Preventive Medicine and Biometrics, 4301 Jones Bridge Road, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Whelton, Andrew J., E-mail: ajwhelton@southalabama.edu [Department of Civil Engineering, 3021 Shelby Hall, University of South Alabama, Mobile, AL 36688 (United States)

    2013-07-01

    The impact of temperature and storage time on military packaged water (MPW) quality was examined at four temperatures (23.0 °C to 60.0 °C) for 120 days. Polyethylene terephthalate (PET) bottles were filled in California and Afghanistan with unbuffered water treated by reverse osmosis. The US military's water pH long-term potability standard was exceeded, and US Food and Drug Administration (USFDA) and US Environmental Protection Agency (USEPA) drinking water pH and odor intensity limits were also exceeded. During a 70 day exposure period, Port Hueneme MPW total organic carbon and total trihalomethane levels increased from < 0.25 mg/L to 2.0 ± 0.0 mg/L and < 0.05 μg/L to 51.5 ± 2.1 μg/L, respectively. PET released organic contaminants into MPW and residual disinfectant generated trihalomethane contaminants. After 14 days at 37.7 °C and 60.0 °C, Afghanistan MPW threshold odor number values were 8.0 and 8.6, respectively. Total organic carbon concentration only increased with exposure duration at 60.0 °C. Acetaldehyde and formaldehyde contaminants were not detected likely due to the high method detection limits applied in this study. Phthalate contaminants detected and their maximum levels were butylbenzylphthalate (BBP) 0.43 μg/L, di-n-butylphthalate (DnBP) 0.38 μg/L, di(2-ethylhexyl)phthalate (DEHP) 0.6 μg/L, and diethylphthalate (DEP) 0.32 μg/L. Antimony was only detected in 60.0 °C Afghanistan MPW on Day 28 and beyond, and its maximum concentration was 3.6 ± 0.3 μg/L. No antimony was found in bottles exposed to lesser temperatures. Environmental health, PET synthesis and bottle manufacturers, and bottle users can integrate results of this work to improve health protective decisions and doctrine. - Highlights: • Temperature and storage time impacted military bottled water quality up to 60 °C. • The chemical quality of water bottled in California and Afghanistan was affected. • Drinking water pH and odor intensity limits were also

  19. Survival and recovery of Aeromonas hydrophila in water: development of methodology for testing bottled water in Canada.

    Science.gov (United States)

    Warburton, D W; McCormick, J K; Bowen, B

    1994-02-01

    Proposed changes to the Regulations for bottled water in the Food and Drugs Act of Canada include criteria for Aeromonas hydrophila (0 colony-forming units/100 mL water). The development of the methodology used to support these proposed Regulations and the survival of A. hydrophila in inoculated water are described. The methodology used in the isolation of A. hydrophila includes the use of hydrophobic grid membrane filters (HGMF), a resuscitation step on tryptic soy agar, and selective plating on membrane-Aeromonas-trehalose agar and Aeromonas medium. Aeromonas hydrophila proliferated and survived in inoculated water for up to 60 days or longer depending on the other contaminating bacteria. The presence of Pseudomonas aeruginosa enhanced the survival of A. hydrophila and enabled this bacteria to survive for more than 60 days.

  20. The occurrence of Aeromonas spp. in the bottled mineral water, well water and tap water from the municipal supplies

    Directory of Open Access Journals (Sweden)

    Denise de Oliveira Scoaris

    2008-10-01

    Full Text Available The aim of this work was to study the occurrence of Aeromonas sp in the bottled mineral water, well water and tap water from the municipal supplies. Positive samples were found for Aeromonas spp. 12.7% from the mineral water, 8.3% from the artesian water and 6.5% from the tap water. The recovery of Aeromonas spp. was significantly higher in the bottled mineral and artesian water than in the tap water from municipal supplies. The occurrence of the Aeromonas spp. did not correlate significantly with the contamination indicator bacteria (i.e. total coliforms in the artesian water samples. However, a significant correlation was found between Aeromonas spp. and total coliforms in the both mineral water and tap water samples. The presence or absence of a correlation between the indicator bacteria and Aeromonas could reflect the occasional appearance of the pathogen in the drinking water and the different rates of survival and recovery of these agents compared with those fecal indicators. The finding that 41.6, 14.8 and 9.0 % of the artesian water, bottled mineral water and tap water, respectively, sampled in the current study failed to meet the Brazilian standard for total coliforms in the drinking water should therefore be of concern.A porcentagem de amostras positivas para Aeromonas foi de 12.7% para água mineral, 8.3% para água de poço artesiano e 6.5% para água do sistema público de abastecimento. O isolamento de Aeromonas spp. foi significativamente maior em água mineral e água de poço artesiano do que em água do sistema público. A ocorrência de Aeromonas spp. não teve correlação significativa com os indicadores de contaminação tradicionalmente utilizados (coliformes totais em amostras de água de poço artesiano. No entanto, esta correlação foi positiva e significativa em água mineral e água do sistema público. A presença ou ausência de correlação entre bactérias indicadoras e a presença de Aeromonas pode refletir o

  1. Determination of barium in bottled drinking water by graphite furnace atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Fagioli, F.; Locatelli, C.; Lanciotti, E.; Vallone, G.; Mazzotta, D.; Mugelli, A.

    1988-11-01

    In relation to the wide environmental spread of barium and to its cardiovascular effects, barium levels were determined by graphite furnace atomic absorption spectrometry in 60 different brands of bottled water marketed in Italy. Matrix interferences were investigated in order to evaluate the use of an analytical calibration function rather than the much more time consuming addition technique. The barium content ranged from limit of detection C/sub L/ (7.0 ..mu..g/1) up to 660 ..mu..g/1, the median value being 80 ..mu..g/l, while the recovery tests varied between 90 and 110% and the precision of the method (s/sub yx/) was 2.5%.

  2. Tracing atmospheric nitrate in groundwater using triple oxygen isotopes: evaluation based on bottled drinking water

    Directory of Open Access Journals (Sweden)

    F. Nakagawa

    2013-06-01

    Full Text Available The stable isotopic compositions of nitrate dissolved in 49 brands of bottled drinking water collected worldwide were measured, to trace the fate of atmospheric nitrate (NO3− atm that had been deposited into subaerial ecosystems, using the 17O anomalies (Δ17O of nitrate as tracers. The use of bottled water enables collection of groundwater recharged at natural, background watersheds. The nitrate in groundwater had small Δ17O values ranging from −0.2‰ to +4.5‰ n = 49. The average Δ17O value and average mixing ratio of atmospheric nitrate to total nitrate in the groundwater samples were estimated to be 0.8‰ and 3.1%, respectively. These findings indicated that the majority of atmospheric nitrate had undergone biological processing before being exported from the surface ecosystem to the groundwater. Moreover, the concentrations of atmospheric nitrate were estimated to range from less than 0.1 μmol L−1 to 8.5 μmol L−1 with higher NO3−atm concentrations being obtained for those recharged in rocky, arid or elevated areas with little vegetation and lower NO3−atm concentrations being obtained for those recharged in forested areas with high levels of vegetation. Additionally, many of the NO3−atm-depleted samples were characterized by elevated δ15N values of more than +10‰. Uptake by plants and/or microbes in forested soils subsequent to deposition and the progress of denitrification within groundwater likely plays a significant role in the removal of NO3−atm.

  3. Tracing atmospheric nitrate in groundwater using triple oxygen isotopes: evaluation based on bottled drinking water

    Science.gov (United States)

    Nakagawa, F.; Suzuki, A.; Daita, S.; Ohyama, T.; Komatsu, D. D.; Tsunogai, U.

    2013-06-01

    The stable isotopic compositions of nitrate dissolved in 49 brands of bottled drinking water collected worldwide were measured, to trace the fate of atmospheric nitrate (NO3- atm) that had been deposited into subaerial ecosystems, using the 17O anomalies (Δ17O) of nitrate as tracers. The use of bottled water enables collection of groundwater recharged at natural, background watersheds. The nitrate in groundwater had small Δ17O values ranging from -0.2‰ to +4.5‰ n = 49). The average Δ17O value and average mixing ratio of atmospheric nitrate to total nitrate in the groundwater samples were estimated to be 0.8‰ and 3.1%, respectively. These findings indicated that the majority of atmospheric nitrate had undergone biological processing before being exported from the surface ecosystem to the groundwater. Moreover, the concentrations of atmospheric nitrate were estimated to range from less than 0.1 μmol L-1 to 8.5 μmol L-1 with higher NO3-atm concentrations being obtained for those recharged in rocky, arid or elevated areas with little vegetation and lower NO3-atm concentrations being obtained for those recharged in forested areas with high levels of vegetation. Additionally, many of the NO3-atm-depleted samples were characterized by elevated δ15N values of more than +10‰. Uptake by plants and/or microbes in forested soils subsequent to deposition and the progress of denitrification within groundwater likely plays a significant role in the removal of NO3-atm.

  4. Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles.

    Science.gov (United States)

    Fostier, Anne Hélène; Pereira, Maria do Socorro Silva; Rath, Susanne; Guimarães, José Roberto

    2008-05-01

    Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO2 immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO2 concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO2 concentration of the coating solution: 10%; Fe(II): 7.0 mg l(-1); solar exposure time: 120 min) were applied to natural water samples spiked with 500 microg l(-1) As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 microg l(-1)) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO2 can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO2 immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.

  5. An evaluation of the migration of antimony from polyethylene terephthalate (PET) plastic used for bottled drinking water

    Energy Technology Data Exchange (ETDEWEB)

    Chapa-Martínez, C.A.; Hinojosa-Reyes, L.; Hernández-Ramírez, A.; Ruiz-Ruiz, E.; Maya-Treviño, L.; Guzmán-Mar, J.L., E-mail: jorge.guzmanmr@uanl.edu.mx

    2016-09-15

    The leaching of antimony (Sb) from polyethylene terephthalate (PET) bottling material was assessed in twelve brands of bottled water purchased in Mexican supermarkets by atomic fluorescence spectrometry with a hydride generation system (HG-AFS). Dowex® 1X8-100 ion-exchange resin was used to preconcentrate trace amounts of Sb in water samples. Migration experiments from the PET bottle material were performed in water according to the following storage conditions: 1) temperature (25 and 75 °C), 2) pH (3 and 7) and 3) exposure time (5 and 15 days), using ultrapure water as a simulant for liquid foods. The test conditions were studied by a 2{sup 3} factorial experimental design. The Sb concentration measured in the PET packaging materials varied between 73.0 and 111.3 mg/kg. The Sb concentration (0.28–2.30 μg/L) in all of the PET bottled drinking water samples examined at the initial stage of the study was below the maximum contaminant level of 5 μg/L prescribed by European Union (EU) regulations. The parameters studied (pH, temperature, and storage time) significantly affected the release of Sb, with temperature having the highest positive significant effect within the studied experimental domain. The highest Sb concentration leached from PET containers was in water samples at pH 7 stored at 75 °C for a period of 5 days. The extent of Sb leaching from the PET ingredients for different brands of drinking water can differ by as much as one order of magnitude in experiments conducted under the worst-case conditions. The chronic daily intake (CDI) caused by the release of Sb in one brand exceeded the Environmental Protection Agency (USEPA) regulated CDI value of 400 ng/kg/day, with values of 514.3 and 566.2 ng/kg/day for adults and children. Thus, the appropriate selection of the polymer used for the production of PET bottles seems to ensure low Sb levels in water samples. - Highlights: • The PET safety due to the release of Sb was evaluated in Mexican water PET

  6. BOTTLE MATERIAL AND CLEANSING PROCEDURES OF INFANT FEEDING BOTTLES.

    Science.gov (United States)

    Kuan, Wen-Hui; Chen, Yi-Lang

    2016-01-01

    The cleanliness of feeding bottles is vital for child health. Although machine cleansing of bottles in the food industry has been established, mechanical and manual cleansing methods are highly variable. This study was undertaken to determine the differences in the cleanliness of bottles that were cleaned using various combinations of bottle materials [glass and polypropylene (PP)], rinsing water volumes (1/3, 1/2, and 2/3 capacity of a bottle), and sustained shaking times (5 seconds and 20 seconds). Total organic carbon (TOC) and conductivity measurements were respectively used to evaluate the rinsed quantities of organic and inorganic formula residue from feeding bottles. The results indicated that glass bottles filled with rinsing water to 2/3 of their capacity showed the most efficient cleansing performance. However, the PP bottles exhibited a relatively poor cleansing result, particularly for organic cleanliness. The organic residue tends to accumulate on the PP bottle interior because of the aggregation of compounds with similar properties. The shaking time hardly influenced the cleanliness. The glass bottle was superior to the PP bottle in both organic and inorganic cleanliness, and organic constituents were more difficult to rinse from the bottle than the inorganic constituents were.

  7. Dimensioning of a solar water heater made from PET bottles; Dimensionamento de um aquecedor solar de agua feito com garrafas PET

    Energy Technology Data Exchange (ETDEWEB)

    Bertoleti, Pedro Henrique Fonseca; Souza, Teofilo Miguel de [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil). Centro de Energias Renovaveis

    2008-07-01

    This document show the solar water heater made of PET bottles, a simple-construction solar water heater that try to give us two important solutions, water heating using solar energy and reutilization of the PET bottles left in the nature. Also, it will be showed how to do the dimensioning of it. Based on the showed dimensioning a application / software is developed and after that simulations are made using the application to provide how is the economy if it's used this kind of solar water heater and their environmental contribution by reutilization of the PET bottles abandoned in the nature. For example, in a common home the economy is about 45% of the electricity bill considering that the warmed water is used just to take a shower. So, the conclusion is: the solar water heater made by PET bottles is a very relevant equipment to the use of the solar energy, to useful applications and environmental contribution. (author)

  8. Acanthamoeba T4, T5 and T11 isolated from mineral water bottles in southern Brazil.

    Science.gov (United States)

    Maschio, Vinicius José; Chies, Fernanda; Carlesso, Ana Maris; Carvalho, Amanda; Rosa, Sayonara Peixoto; Van Der Sand, Sueli Teresinha; Rott, Marilise Brittes

    2015-01-01

    Acanthamoeba is a protist potential pathogen, capable of causing a blinding keratitis in contact lens wearers and disseminated infection, leading to granulomatous amebic encephalitis in immunocompromised individuals. This amoeba is a ubiquitous organism that has been isolated from various domestic water systems, such as cooling towers and hospital water networks. The objective of this work was to investigate the presence of Acanthamoeba in mineral water bottles marketed in Porto Alegre, southern Brazil. Positive samples were further classified at the genotype level after sequencing the ASA.S1 region of 18S rDNA gene. Six of the eight isolates belonged to T5 genotype, one to T4 genotype, and one was T11. Several genotypes have been reported worldwide as causative of pathologies in humans, including genotypes T4, T5 and T11. Overall, the widespread distribution of potentially pathogenic Acanthamoeba strains in the studied source demands more awareness within the public and health professionals, because this pathogen is emerging as a risk for human health worldwide.

  9. An alternative procedure for uranium analysis in drinking water using AQUALIX columns: application to varied French bottled waters.

    Science.gov (United States)

    Bouvier-Capely, C; Bonthonneau, J P; Dadache, E; Rebière, F

    2014-01-01

    The general population is chronically exposed to uranium ((234)U, (235)U, and (238)U) and polonium ((210)Po) mainly through day-to-day food and beverage intake. The measurement of these naturally-occurring radionuclides in drinking water is important to assess their health impact. In this work the applicability of calix[6]arene-derivatives columns for uranium analysis in drinking water was investigated. A simple and effective method was proposed on a specific column called AQUALIX, for the separation and preconcentration of U from drinking water. This procedure is suitable for routine analysis and the analysis time is considerably shortened (around 4h) by combining the separation on AQUALIX with fast ICP-MS measurement. This new method was tested on different French bottled waters (still mineral water, sparkling mineral water, and spring water). Then, the case of simultaneous presence of uranium and polonium in water was considered due to interferences in alpha spectrometry measurement. A protocol was proposed using a first usual step of spontaneous deposition of polonium on silver disc in order to separate Po, followed by the uranium extraction on AQUALIX column before alpha spectrometry counting.

  10. Snuff Bottle

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Chinese snuff bottles are artistic curiosities enjoyed by connoisseurs and collectors alike. In the 17th century, artisans of the Chinese imperial court made several different kinds of snuff bottles with a superior aesthetic. Nowadays, China still

  11. The calcium concentration of public drinking waters and bottled mineral waters in Spain and its contribution to satisfying nutritional needs

    Directory of Open Access Journals (Sweden)

    Isidro Vitoria

    2014-07-01

    Full Text Available Introduction: A sufficient intake of calcium enables correct bone mineralization. The bioavailability of calcium in water is similar to that in milk. Objective: To determine the concentration of calcium in public drinking water and bottled mineral water. Methods: We used ion chromatography to analyse the calcium concentrations of public drinking waters in a representative sample of 108 Spanish municipalities (21,290,707 people and of 109 natural mineral waters sold in Spain, 97 of which were produced in Spain and 12 of which were imported. Results: The average calcium concentration of public drinking waters was 38.96 ± 32.44 mg/L (range: 0.40159.68 mg/L. In 27 municipalities, the water contained 50-100 mg/L of calcium and in six municipalities it contained over 100 mg/L. The average calcium concentration of the 97 Spanish natural mineral water brands was 39.6 mg/L (range: 0.6-610.1 mg/L. Of these, 34 contained 50-100 mg/L of calcium and six contained over 100 mg/L. Of the 12 imported brands, 10 contained over 50 mg/L. Assuming water consumption is as recommended, water containing 50-100 mg/L of calcium provides 5.4-12.8% of the recommended intake of calcium for children aged one to thirteen, up to 13.6% for adolescents, 5.8-17.6% for adults, and up to 20.8% for lactating mothers. Water with 100-150 mg/L of calcium provides 10-31% of the recommended dietary allowance, depending on the age of the individual. Discussion: Public drinking water and natural mineral water consumption in a third of Spanish cities can be considered an important complementary source of calcium.

  12. Determination of Bromate at Trace Level in Sudanese Bottled Drinking Water Using Ion Chromatography

    Directory of Open Access Journals (Sweden)

    Mei Musa

    2010-01-01

    Full Text Available Bromate ion was determined by ion chromatography with spectro-photometric detection after post column reaction with o-dianisidine reagent in acidic medium. IonPac AS19 anion-exchange column was used with 20 mM sodium hydroxide eluent. The eluent from the column was then allowed to react with o-dianisidine at 60 °C. The developed colour of the final product was measured spectrophotometrically at 450 nm. Linearity of the method was checked up to 200 μg/L by using 200 μL sample injection volume and the linear correlation coefficient was 0.9998. The method detection limit was 0.56 μg/L and the precision was 6.2% at 100 μg/L. The spiked recovery for bromate in water samples was 93%. Interferences from some anions eg. nitrate, chloride and nitrite were studied. The method was applied for the determination of bromate ion in ten sudanese bottled drinking water. Bromate was detected in 60% of the samples at concentrations ranged between 5-169 μg/L.

  13. Separation and preconcentration of aluminum in parenteral solutions and bottled mineral water using different analytical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Kazi, Tasneem G., E-mail: tgkazi@yahoo.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Khan, Sumaira, E-mail: skhanzai@gmail.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Baig, Jameel A., E-mail: jab_mughal@yahoo.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Kolachi, Nida F., E-mail: nidafatima6@gmail.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Afridi, Hassan I., E-mail: hassanimranafridi@yahoo.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Kandhro, Ghulam A.; Kumar, Sham [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan); Shah, Abdul Q., E-mail: aqshah07@yahoo.com [Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080 (Pakistan)

    2009-12-30

    A new method is reported for the separation of aluminum ions [Al(III)] from interfering elements in parenteral and pharmaceutical solutions (PS) and bottled mineral water (BMW) samples, through solid-phase extraction with 2-methyl-8-hydroxyquinoline (quinaldine) adsorbed onto activated silica gel. While the enrichment step of separated Al(III) was carried out by cloud point extraction (CPE) using 8-hydroxyquinoline as complexing reagent, the resulted complex was entrapped in a non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The enriched Al(III) in sample solutions were determined by spectrofluorometry (SPF) at {lambda}{sub excitation} 370 nm and {lambda}{sub emission} 510 nm, and flame atomic absorption spectrometry (FAAS) for comparative purpose. The variables affecting the complexation and extraction steps were studied and optimized. The validity of methodology was checked with certified reference material of water and standard addition method. The enrichment factor and detection limit of Al(III) for the preconcentration of 50 ml of PS and BMW were found to be 100 and 0.25 {mu}g/L, respectively. The proposed method has been applied for the determination of trace amount of Al(III) in PS and BMW samples with satisfactory results. In PS the levels of Al(III) are above than permissible limit (25 {mu}g/L).

  14. Tracing atmospheric nitrate in groundwater using triple oxygen isotopes: evaluation based on bottled drinking water

    Directory of Open Access Journals (Sweden)

    U. Tsunogai

    2012-11-01

    Full Text Available The stable isotopic compositions of nitrate dissolved in 49 types of bottled drinking water collected worldwide were determined, to trace the fate of atmospheric nitrate (NO3atm that had been deposited into subaerial ecosystems, using the 17O anomalies (Δ17O of nitrate as tracers. The use of bottled water enables collection of groundwater recharged at natural, background watersheds. The nitrate in groundwater had small Δ17O values ranging from −0.2‰ to +4.5‰ (n = 49. The average Δ17O value and average mixing ratio of atmospheric nitrate to total nitrate in the groundwater samples were estimated to be 0.8‰ and 3.1%, respectively. These findings indicated that the majority of atmospheric nitrate had undergone biological processing before being exported from the surface ecosystem to the groundwater. Moreover, the concentrations of atmospheric nitrate were estimated to range from less than 0.1 μmol l−1 to 8.5 μmol l−1, with higher NO3atm concentrations being obtained for those recharged in rocky, arid or elevated areas with little vegetation and lower NO3atm concentrations being obtained for those recharged in forested areas with high levels of vegetation. Additionally, many of the NO3atm-depleted samples were characterized by elevated δ15N values of more than +10‰. Uptake by plants and/or microbes in forested soils subsequent to deposition and the progress of denitrification within groundwater likely plays a significant role in the removal of NO3atm.

  15. Physical, chemical, and other data collected using moored bottle casts at the Coastal waters of California from 01 August 1999 to 01 October 1999 (NODC Accession 0000220)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, physical, chemical, and other data were collected using moored bottle casts in the Coastal Waters of California from the SAMPSON from August...

  16. Water physics and chemistry data from bottle casts from the DELAWARE from 10 May 1967 to 01 June 1967 (NODC Accession 7000769)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the DELAWARE from 10 May 1967 to 01 June 1967. Data were submitted by the National Marine...

  17. Water physics and chemistry data from bottle casts from the AMIGO as part of the SEAGRANT project from 19 January 1972 to 20 April 1973 (NODC Accession 7400540)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the AMIGO from 19 January 1972 to 20 April 1973. Data were submitted by the Moss Landing...

  18. Water physics and chemistry data from bottle casts from the CHESAPEAKE L/S and other platforms from 01 January 1957 to 31 December 1957 (NODC Accession 7000291)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the CHESAPEAKE L/S and other platforms from 01 January 1957 to 31 December 1957. Data were...

  19. Water physics and chemistry data from bottle casts from the CHESAPEAKE L/S and other platforms from 28 November 1955 to 31 December 1956 (NODC Accession 6800101)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the CHESAPEAKE L/S and other platforms from 28 November 1955 to 31 December 1956. Data were...

  20. Water physics and chemistry data from bottle casts from the AQUALAB from 14 October 1968 to 11 December 1968 (NODC Accession 7100270)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the AQUALAB from 14 October 1968 to 11 December 1968. Data were submitted by the Southern...

  1. Water physics and chemistry data from bottle casts from the MISS FLETA from the 14 August 1962 to 06 December 1962 (NODC Accession 6900648)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the MISS FLETA from 14 August 1962 to 06 December 1962. Data were submitted by the Rosenstiel...

  2. Water physics and chemistry data from bottle casts from the MICMAC R/V from the 28 January 1970 to 21 April 1970 (NODC Accession 7100666)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the MICMAC Stanford R/V from 28 January 1970 to 21 April 1970. Data were submitted by the...

  3. An evaluation of the migration of antimony from polyethylene terephthalate (PET) plastic used for bottled drinking water.

    Science.gov (United States)

    Chapa-Martínez, C A; Hinojosa-Reyes, L; Hernández-Ramírez, A; Ruiz-Ruiz, E; Maya-Treviño, L; Guzmán-Mar, J L

    2016-09-15

    The leaching of antimony (Sb) from polyethylene terephthalate (PET) bottling material was assessed in twelve brands of bottled water purchased in Mexican supermarkets by atomic fluorescence spectrometry with a hydride generation system (HG-AFS). Dowex® 1X8-100 ion-exchange resin was used to preconcentrate trace amounts of Sb in water samples. Migration experiments from the PET bottle material were performed in water according to the following storage conditions: 1) temperature (25 and 75°C), 2) pH (3 and 7) and 3) exposure time (5 and 15days), using ultrapure water as a simulant for liquid foods. The test conditions were studied by a 2(3) factorial experimental design. The Sb concentration measured in the PET packaging materials varied between 73.0 and 111.3mg/kg. The Sb concentration (0.28-2.30μg/L) in all of the PET bottled drinking water samples examined at the initial stage of the study was below the maximum contaminant level of 5μg/L prescribed by European Union (EU) regulations. The parameters studied (pH, temperature, and storage time) significantly affected the release of Sb, with temperature having the highest positive significant effect within the studied experimental domain. The highest Sb concentration leached from PET containers was in water samples at pH7 stored at 75°C for a period of 5days. The extent of Sb leaching from the PET ingredients for different brands of drinking water can differ by as much as one order of magnitude in experiments conducted under the worst-case conditions. The chronic daily intake (CDI) caused by the release of Sb in one brand exceeded the Environmental Protection Agency (USEPA) regulated CDI value of 400ng/kg/day, with values of 514.3 and 566.2ng/kg/day for adults and children. Thus, the appropriate selection of the polymer used for the production of PET bottles seems to ensure low Sb levels in water samples.

  4. Opportunistic pathogens and elements of the resistome that are common in bottled mineral water support the need for continuous surveillance

    OpenAIRE

    Maria Fernanda Falcone-Dias; Daniela Centrón; Fernando Pavan; Adriana Candido da Silva Moura; Felipe Gomes Naveca; Victor Costa de Souza; Adalberto Farache Filho; Clarice Queico Fujimura Leite

    2015-01-01

    Several differences concerning bacterial species, opportunistic pathogens, elements of the resistome as well as variations concerning the CFU/mL counts were identified in some of the five most marketed bottled mineral water from Araraquara city, São Paulo, Brazil. Two out of five brands tested were confirmed as potential source of opportunistic pathogens, including Mycobacterium gordonae, Ralstonia picketti and Burkholderia cepacia complex (Bcc). A total of one hundred and six isolates were r...

  5. [Simultaneous determination of 11 bisphenols in plastic bottled drinking water by ultra performance liquid chromatography-tandem mass spectrometry].

    Science.gov (United States)

    Gou, Xinlei; Gao, Xia; Hu, Guanghui; Chi, Haitao; Le, Shengfeng; Wang, Wei; Liu, Weili

    2014-09-01

    A sensitive method was developed for the simultaneous determination of 11 bisphenols in plastic bottled drinking water by ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The samples were freeze-dried under vacuum and then dissolved with methanol. The separation was performed on a UPLC BEH C18 column (100 mm x 2.1 mm, 1.7 μm) by using 0.1% (v/v) NH3 · H2O and methanol as mobile phases with gradient elution at a flow rate of 0.2 mL/min. The electrospray ionization (ESI) source in negative ion mode was used for the analysis of the 11 bisphenols in the multiple reaction monitoring (MRM) mode. The results verified that the standard curves for the 11 bisphenols were obtained with good correlation coefficients (R2) > 0.997 in their concentration ranges. The limits of detection (LOD, S/N = 3) for the 11 bisphenols were in the range of 0.01-1.00 μg/L. The mean recoveries for the 11 bisphenols at three spiked levels (low, middle, high) were 75.3%-102.1% with the relative standard deviations of 1.5%-8.9%. Seven plastic bottled drinking water samples were tested, and no bisphenol was found. The method is accurate, simple, rapid and feasible for the simultaneous determination of bisphenols in plastic bottled drinking water.

  6. Links between purchase location and stable isotope ratios of bottled water, soda, and beer in the United States.

    Science.gov (United States)

    Chesson, Lesley A; Valenzuela, Luciano O; O'Grady, Shannon P; Cerling, Thure E; Ehleringer, James R

    2010-06-23

    This study investigated the impact of purchase location on the stable isotope ratios of beverages by measuring the delta(2)H and delta(18)O values of bottled water, soda, beer, and tap water collected across the contiguous United States. Measured beverage delta(2)H and delta(18)O values generally fit the Global Meteoric Water Line (GMWL), suggesting region-of-origin information is recorded in beverage water. Tap water delta(2)H and delta(18)O values were strongly correlated with the stable isotope ratios of bottled water and soda purchased in the same location. Beer water delta(2)H and delta(18)O values were also correlated with tap water, although not as strongly. Variability in delta(2)H and delta(18)O values among beverages purchased at a single location ranged from 2 to 41 per thousand and from 0.3 to 5.2 per thousand, respectively, but was generally moderate in most locations. It was concluded that the isotopic composition of local tap water is a reasonable proxy for consumers' fluid intake in most U.S. cities.

  7. Chemometric exploration of the abundance of trace metals and ions in desalinated and bottled drinking water in Kuwait.

    Science.gov (United States)

    Al-Mudhaf, Humood F; Astel, Aleksander M; Al-Hayan, Mohammad N; Abu-Shady, Abdel-Sattar I

    2014-01-01

    Chemometric exploration of desalinated and bottled water in Kuwait was employed to interpret the spatial variation in the physicochemical parameters. The data set consisted of the concentrations of principal macronutrient elements, ions, trace elements, temperature, pH, electrolytic conductivity, and total dissolved solids measured in indoor, outdoor, and bottled water samples. Quantitative assessment of the Cd, Hg, and Sb contents revealed rare cases of elevated concentrations; however, these concentrations were always below international health agency standards. Two general clusters of similar parameters were discovered in the variables mode and were associated with "natural" water characteristics or "conditions" of the pipeline system. We found that an increase in temperature facilitates the leaching of metals from the metallic equipment in the system. Spatial variation in the water quality was discovered, which indicates that residential areas fed from the Az-Zoor plant are supplied with water that contains lower concentrations of Ca, Cr, Mg, Mo, Ni, Na, TDS, and SO4 (2-) than the desalinated water produced and fed from the Doha plant. However, on the basis of the aluminum concentration in the water, cement mortar lining is assumed to be prevalent in the pipeline systems of the Mubarak Al-Kabeer, Ahmadi, Umm Al-Haiman, and Sorra areas.

  8. Physicochemical properties and the concentration of anions, major and trace elements in groundwater, treated drinking water and bottled drinking water in Najran area, KSA

    Science.gov (United States)

    Brima, Eid I.

    2017-03-01

    Basic information about major elements in bottled drinking water is provided on product labels. However, more information is needed about trace elements in bottled drinking water and other sources of drinking water to assess its quality and suitability for drinking. This is the first such study to be carried out in Najran city in the Kingdom of Saudi Arabia (KSA). A total of 48 water samples were collected from different sources comprising wells, stations for drinking water treatment and bottled drinking water (purchased from local supermarkets). The concentrations of 24 elements [aluminum (Al), arsenic (As), barium (Ba), calcium (Ca), cadmium (Cd), cobalt (Co), chromium (Cr), cesium (Cs), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), molydenum (Mo), sodium (Na), nickel (Ni), lead (Pb), rubidium (Rb), selenium (Se), strontium (Sr), titanium (Ti), vanadium (V), uranium (U) and zinc (Zn)] were determined by inductively coupled plasma-mass spectrometry (ICP-MS). Anions (chlorine (Cl-), fluoride (F-), sulfate (SO4 2-) and nitrate (NO3 -) were determined by ion chromatography (IC). Electrical conductivity (EC), pH, total dissolved salts (TDS) and total hardness (TH) were also measured. All parameters of treated drinking water and bottled drinking water samples did not exceed the World Health Organization (WHO) 2008, US Environmental Protection Agency (USEPA 2009), Gulf Cooperation Council Standardization Organization (GSO) 2008 and Saudi Arabian Standards Organization (SASO) 1984 recommended guidelines. It is noteworthy that groundwater samples were not used for drinking purpose. This study is important to raise public knowledge about drinking water, and to promote public health.

  9. A margin of exposure approach to assessment of non-cancerous risk of diethyl phthalate based on human exposure from bottled water consumption.

    Science.gov (United States)

    Zare Jeddi, Maryam; Rastkari, Noushin; Ahmadkhaniha, Reza; Yunesian, Masud; Nabizadeh, Ramin; Daryabeygi, Reza

    2015-12-01

    Phthalates may be present in food due to their widespread presence as environmental contaminants or due to migration from food contact materials. Exposure to phthalates is considered to be potentially harmful to human health as well. Therefore, determining the main source of exposure is an important issue. So, the purpose of this study was (1) to measure the release of diethyl phthalate (DEP) in bottled water consumed in common storage conditions specially low temperature and freezing conditions; (2) to evaluate the intake of DEP from polyethylene terephthalate (PET) bottled water and health risk assessment; and (3) to assess the contribution of the bottled water to the DEP intake against the tolerable daily intake (TDI) values. DEP migration was investigated in six brands of PET-bottled water under different storage conditions room temperature, refrigerator temperature, freezing conditions (40 °C ,0 °C and -18 °C) and outdoor] at various time intervals by magnetic solid extraction (MSPE) using gas chromatography-mass spectroscopy (GC-MS). Eventually, a health risk assessment was conducted and the margin of exposure (MOE) was calculated. The results indicate that contact time with packaging and storage temperatures caused DEP to be released into water from PET bottles. But, when comprising the DEP concentration with initial level, the results demonstrated that the release of phthalates were not substantial in all storage conditions especially at low temperatures (bottled water was much lower than the reference value. However, the lowest MOE was estimated for high water consumers (preschooler > children > lactating women > teenagers > adults > pregnant women), but in all target groups, the MOE was much higher than 1000, thus, low risk is implied. Consequently, PET-bottled water is not a major source of human exposure to DEP and from this perspective is safe for consumption.

  10. Migration of bisphenol A from plastic baby bottles, baby bottle liners and reusable polycarbonate drinking bottles.

    Science.gov (United States)

    Kubwabo, C; Kosarac, I; Stewart, B; Gauthier, B R; Lalonde, K; Lalonde, P J

    2009-06-01

    Human exposure to bisphenol A (BPA) has recently received special attention. It has been shown that exposure to BPA may occur through the consumption of beverages or foods that have been in contact with polycarbonate (PC) plastic containers or epoxy resins in food packaging. A BPA migration study was conducted using a variety of plastic containers, including polycarbonate baby bottles, non-PC baby bottles, baby bottle liners, and reusable PC drinking bottles. Water was used to simulate migration into aqueous and acidic foods; 10% ethanol solution to simulate migration to low- and high-alcoholic foods; and 50% ethanol solution to simulate migration to fatty foods. By combining solid-phase extraction, BPA derivatization and analysis by GC-EI/MS/MS, a very low detection limit at the ng l(-1) level was obtained. Migration of BPA at 40 degrees C ranged from 0.11 microg l(-1) in water incubated for 8 h to 2.39 microg l(-1) in 50% ethanol incubated for 240 h. Residual BPA leaching from PC bottles increased with temperature and incubation time. In comparison with the migration observed from PC bottles, non-PC baby bottles and baby bottle liners showed only trace levels of BPA. Tests for leachable lead and cadmium were also conducted on glass baby bottles since these represent a potential alternative to plastic bottles. No detectable lead or cadmium was found to leach from the glass. This study indicated that non-PC plastic baby bottles, baby bottle liners and glass baby bottles might be good alternatives for polycarbonate bottles.

  11. Chemical quality of bottled mineral waters from markets of Curitiba-PR-Brazil

    Directory of Open Access Journals (Sweden)

    Éder José dos Santos

    Full Text Available ABSTRACT Twenty-seven bottled mineral waters from local markets in Curitiba, State of Paraná, Brazil were analyzed for a number of constituents, including: pH, conductivity, total dissolved solids, hardness, HCO3 - and CO 3 2-, as well as Ca2+, Mg2+, Na+, K+, NH4 + , F-, Cl-, NO3 -, NO2 - and SO4 2- by ion chromatography (IC; Al, Ba, Cd, Cr, Cu, Fe, Li, Mn, Ni, Sr, V and Zn by inductively coupled plasma optical emission spectrometry (ICP OES; Hg by cold vapor generation-ICP OES and As, Pb, Sb and Se by ICP-mass spectrometry (ICP-MS. The obtained limits of quantitation (LOQ were adequate for the determination of all analytes using the various analytical techniques. Results for the analysis of AccuStandard certified reference materials QCS-01-5, QCS-02-R1-5 and TCLP-02-1 as well as spike recoveries to samples show acceptable values, within 90-111 % of expected concentrations with relative standard deviations below 10 %, demonstrating the accuracy of the determinations. Both NO2 - and NO 3 - were above the maximum limits set by Brazilian legislation in two samples, indicating a microbiological contamination. One imported sample presented As (6.1 ± 0.2 µg L-1 near the maximum limit (10 µg L-1 while all other elements of interest were below the values specified by Brazilian legislation. Principal component analysis revealed that four imported samples and one from the Minas Gerais State have the highest mineral concentrations.

  12. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 27 August 1973 - 27 November 1974 (NODC Accession 7600777)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from August 27, 1973 to November 7,...

  13. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 21 May 1963 - 08 July 1975 (NODC Accession 7601561)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from May 21, 1963 to July 8, 1975....

  14. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 08 March 1974 - 13 May 1974 (NODC Accession 7501210)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from March 8, 1974 to May 13, 1974....

  15. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 05 November 1973 to 06 June 1974 (NODC Accession 7500931)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from November 5, 1973 to June 6,...

  16. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 10 April 1978 - 09 August 1978 (NODC Accession 7900249)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from April 10, 1978 to August 9,...

  17. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project from 12 April 1976 - 13 September 1976 (NODC Accession 7700770)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from April 12, 1976 to September 13,...

  18. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 09 April 1979 - 23 August 1979 (NODC Accession 8100440)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from April 9, 1979 to August 23,...

  19. Assessment of the Quality of Bottled/Sachet Water in the Tarkwa-Nsuaem Municipality (TM of Ghana

    Directory of Open Access Journals (Sweden)

    D. Nana Asamoah and R. Amorin

    2011-05-01

    Full Text Available This study aims at assessing the quality of water from bottled/sachet water in the Tarkwa-Nsuaem Municipality. Tarkwa is an ancient mining town sited in an Equatorial climate in Ghana and experiences high population growth rate as a result of mining activities. Due to this, water resources are under pressure as Ghana Water Company Ltd., (GWCL produces only 55% of the Municipality’s water requirements. The population is skeptical of using other sources of water for domestic purposes because of mining activities. Therefore, majority of the people in the Municipality depend on bottled/sachet water for drinking. This study presents and discusses the results of physicochemical and microbial analyses of six bottled/sachet water samples. The water source of these water producing companies is groundwater. Two sets of samples were collected from each company during the rainy season and the dry season to account for seasonal variations. A representative sample for each company was analyzed by the Chemistry/Bacteria Division of the GWCL, Takoradi for physicochemical parameters including pH, temperature, taste, electrical conductivity, true colour, turbidity total dissolved solids, total suspended solids, total alkalinity, total hardness and coliform bacteria. Metals and anions analysed were Ca, Mn, K, Na, Cr, Cd, Sb, Ba. BO3-, total Fe, Pb, Zn, As, NO3-, NO2- SO4-2, PO4-3, (NH3-N, F-, Cl-, CN-, carbonate hardness and bicarbonate hardness. Bacteria analysed were total Coliforms, Escherichia coli and total Heterotrophic bacteria. The concentrations of most of the investigated parameters in the drinking water samples from Tarkwa Nsuaem Municipality were within the permissible limits of the World Health Organization (WHO/Ghana Standard Board (GSB drinking water quality guidelines except pH, Ba and Cl- contents. The pH of SKFDW and DLFWD were respectively 5.5 and 6.31; acidic and lower than the recommended WHO/GSB guideline of 6.5-8.5. The Ba contents in the

  20. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; in-bottle acid digestion of whole-water samples

    Science.gov (United States)

    Hoffman, G.L.; Fishman, M. J.; Garbarino, J.R.

    1996-01-01

    Water samples for trace-metal determinations routinely have been prepared in open laboratories. For example, the U.S. Geological Survey method I-3485-85 (Extraction Procedure, for Water- Suspended Sediment) is performed in a laboratory hood on a laboratory bench without any special precautions to control airborne contamination. This method tends to be contamination prone for several trace metals primarily because the samples are transferred, acidified, digested, and filtered in an open laboratory environment. To reduce trace-metal contamination of digested water samples, procedures were established that rely on minimizing sample-transfer steps and using a class-100 clean bench during sample filtration. This new procedure involves the following steps: 1. The sample is acidified with HCl directly in the original water-sample bottle. 2. The water-sample bottle with the cap secured is heated in a laboratory oven. 3. The digestate is filtered in a class-100 laminar-flow clean bench. The exact conditions used (that is, oven temperature, time of heating, and filtration methods) for this digestion procedure are described. Comparisons between the previous U.S Geological Survey open-beaker method I-3485-85 and the new in-bottle procedure for synthetic and field-collected water samples are given. When the new procedure is used, blank concentrations for most trace metals determined are reduced significantly.

  1. Yeasts and filamentous fungi in bottled mineral water and tap water from municipal supplies

    National Research Council Canada - National Science Library

    Yamaguchi, Mirian Ueda; Rampazzo, Rita de Cássia Pontello; Yamada-Ogatta, Sueli Fumie; Nakamura, Celso Vataru; Ueda-Nakamura, Tânia; Dias Filho, Benedito Prado

    2007-01-01

    The main objective of this study was to analyse the occurrence of yeasts and filamentous fungi in drinking water as well as to investigate their correlation with the indicator bacteria of faecal pollution...

  2. Field comparison of solar water disinfection (SODIS) efficacy between glass and polyethylene terephalate (PET) plastic bottles under sub-Saharan weather conditions.

    Science.gov (United States)

    Asiimwe, J K; Quilty, B; Muyanja, C K; McGuigan, K G

    2013-12-01

    Concerns about photodegradation products leaching from plastic bottle material into water during solar water disinfection (SODIS) are a major psychological barrier to increased uptake of SODIS. In this study, a comparison of SODIS efficacy using glass and plastic polyethylene terephalate (PET) bottles was carried out under strong real sunlight and overcast weather conditions at Makerere University in central Uganda. Both clear and turbid natural water samples from shallow wells and open dug wells, respectively, were used. Efficacy was determined from the inactivation of a wild strain of Escherichia coli in solar-exposed contaminated water in both glass and PET bottles. The studies reveal no significant difference in SODIS inactivation between glass and PET bottles (95% CI, p > 0.05), for all water samples under the different weather conditions except for clear water under overcast conditions where there was a small but significant difference (95% CI, p = 0.047) with less viable bacterial counts in PET bottles at two intermediate time points but not at the end of the exposure. The results demonstrate that SODIS efficacy in glass under tropical field conditions is comparable to PET plastic. SODIS users in these regions can choose either of reactors depending on availability and preference of the user.

  3. Burn Injuries Resulting from Hot Water Bottle Use: A Retrospective Review of Cases Presenting to a Regional Burns Unit in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Shehab Jabir

    2013-01-01

    Full Text Available Introduction. Hot water bottles are commonly used to relieve pain and for warmth during the colder months of the year. However, they pose a risk of serious burn injuries. The aim of this study is to retrospectively review all burn injuries caused by hot water bottles presenting to our regional burns unit. Methods. Patients with burns injuries resulting from hot water bottle use were identified from our burns database between the periods of January 2004 and March 2013 and their cases notes reviewed retrospectively. Results. Identified cases involved 39 children (aged 17 years or younger and 46 adults (aged 18 years or older. The majority of burns were scald injuries. The mean %TBSA was 3.07% (SD ± 3.40. Seven patients (8.24% required debridement and skin grafting while 3 (3.60% required debridement and application of Biobrane. One patient (1.18% required local flap reconstruction. Spontaneous rupture accounted for 48.20% of injuries while accidental spilling and contact accounted for 33% and 18.80% of injuries, respectively. The mean time to heal was 28.87 days (SD ± 21.60. Conclusions. This study highlights the typical distribution of hot water bottle burns and the high rate of spontaneous rupture of hot water bottles, which have the potential for significant burn injuries.

  4. Validation of a method to monitor the occurrence of 20 relevant pharmaceuticals and personal care products in 167 bottled waters.

    Science.gov (United States)

    Lardy-Fontan, Sophie; Le Diouron, Véronique; Drouin, Catherine; Lalere, Béatrice; Vaslin-Reimann, Sophie; Dauchy, Xavier; Rosin, Christophe

    2017-06-01

    Research on emerging substances in drinking water presents major interest and the possibility of trace contamination has seen increasing concern from the scientific community and the public authorities. More particularly, residues of pharmaceuticals and personal care products (PPCPs) in bottled water are a very important issue due to societal concerns and potential media impact. In this context, it has become necessary to carry out reliable monitoring. This requires measurements of high quality with demonstration of accuracy and well-defined uncertainty. In this study, 20 pharmaceutical compounds were targeted for the first time in 167 bottled waters from France and other European countries. An isotope dilution-solid phase extraction-liquid chromatography mass spectrometry method, together with stringent quality control and quality assurance protocols, was developed and validated according to French mandatory standards. Recoveries between 87% and 112% were obtained with coefficient of variation below 20%. Operational limits of quantification (LOQ) were comprised between 5 and 30ngL(-1). Expanded uncertainties (k=2) ranged between 16% and 43% and were below 35% for half of the compounds. The survey showed only four positive quantifications, thereby highlighting the rarity of contamination. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. The Positive and Negative Effects Bottled Water and Counter-Measures%瓶装水的正负效应及对策研究

    Institute of Scientific and Technical Information of China (English)

    李米换

    2011-01-01

    This paper tries to analysis the bottled water from bottled water to both positive and negative effects. Meanwhile, China government is suggested that we should refer to the light of foreign advanced technology and environmental protection measures, and for China's bottled water market development give reasonable guide and regulation to speed up resource-saving and environment-friendly society.%从瓶装水的正负效应两方面来分析其瓶装水的市场发展。同时建议我国政府应参照国外先进技术和环保措施.对我国的瓶装水市场的发展予以合理引导和调控,加快资源节约型、环境友好型社会的建设。

  6. Application of Emotional Branding Strategy in the Model Development of Sports Brand of The Bottled Water Market

    Directory of Open Access Journals (Sweden)

    Marija Jankovic

    2017-06-01

    Full Text Available The new economy has brought new meaning to the brand, which is characterized by a brand, but also has a human touch, turning into an emotional brand. Alternative branding strategies put emphasis on brand experience in terms of emotional, holistic and socially responsible. Bottled water has become the world's "liquid gold" in the last 40 years, because it is a natural product, which is made with minimal costs. The paper develops the idea to perform a kind of humanization and the introduction of a new emotional brand of bottled water on the market, which will bear the name "Aqua F.I.F.A" designed label of FIFA international organizations, as well as the roof of the organizers of the most important football events in the world and the label of the national team. This paper will analyze in detail the market opportunities and prospects of introducing a unique sports brand, on the emotional aspect, with the use of effective marketing communication strategy.

  7. Green Fiber Bottle

    DEFF Research Database (Denmark)

    Didone, Mattia; Tosello, Guido

    their impact on the environment, especially the oceans. For example, the life span of a plastic bottle in the ocean is 500 years, and during its degradation, the plastic is reduced to micro pieces, which causes the starvation of several marine animals. The new bottle is completely made from molded paper pulp...... technologies, the manufacturing technology for the production of the bottle has to offer the possibility of significant energy savings. Molded pulp products are made from wood fibers dispersed in water, and then they are formed, drained and dried. A relatively large quantity of resources (i.e. energy and time......) is consumed during the drying process. It is in this process stage that an innovative way of drying the products can be exploited by using the concept of impulse drying. Impulse drying is an advance drying technique in which water is removed from a wet paper pulp by the combination of mechanical pressure...

  8. Microbiological assessment of house and imported bottled water by comparison of bacterial endotoxin concentration, heterotrophic plate count, and fecal coliform count.

    Science.gov (United States)

    Reyes, Mayra I; Pérez, Cynthia M; Negrón, Edna L

    2008-03-01

    Consumers increasingly use bottled water and home water treatment systems to avoid direct tap water. According to the International Bottled Water Association (IBWA), an industry trade group, 5 billion gallons of bottled water were consumed by North Americans in 2001. The principal aim of this study was to assess the microbial quality of in-house and imported bottled water for human consumption, by measurement and comparison of the concentration of bacterial endotoxin and standard cultivable methods of indicator microorganisms, specifically, heterotrophic and fecal coliform plate counts. A total of 21 brands of commercial bottled water, consisting of 10 imported and 11 in-house brands, selected at random from 96 brands that are consumed in Puerto Rico, were tested at three different time intervals. The Standard Limulus Amebocyte Lysate test, gel clot method, was used to measure the endotoxin concentrations. The minimum endotoxin concentration in 63 water samples was less than 0.0625 EU/mL, while the maximum was 32 EU/mL. The minimum bacterial count showed no growth, while the maximum was 7,500 CFU/mL. Bacterial isolates like P. fluorescens, Corynebacterium sp. J-K, S. paucimobilis, P. versicularis, A. baumannii, P. chlororaphis, F. indologenes, A. faecalis and P. cepacia were identified. Repeated measures analysis of variance demonstrated that endotoxin concentration did not change over time, while there was a statistically significant (p count over time. In addition, multiple linear regression analysis demonstrated that a unit change in the concentration of endotoxin across time was associated with a significant (p count. This analysis evidenced a significant time effect in the average log bacteriological cell count. Although bacterial growth was not detected in some water samples, endotoxin was present. Measurement of Gram-negative bacterial endotoxins is one of the methods that have been suggested as a rapid way of determining bacteriological water quality.

  9. Natural radioactivity of some spring and bottled mineral waters from several central Balkan sites, as a way of their characterization

    Directory of Open Access Journals (Sweden)

    SCEPAN S. MILJANIC

    2007-06-01

    Full Text Available In this work, a study of the radioactive content of some spring and bottled mineral waters originating frommetamorphic rock areas was carried out.Ahigh content of radium isotopes (226Ra, 228Ra, was found by radiometric analysis in the spring waters: Studenica (226Ra: 289 mBq/L, ^ibutkovica (226Ra: 92, 4 mBq/L, 228Ra: 610 mBq/L, and Crni Guber (226Ra: 120 mBq/L, 228Ra: 1170 mBq/L. On the other hand, the radiochemical results showed a higher concentration of 238U in the bottled mineral water samples (dissolved uranium concentrations were from 0.21 mBq/L, for "Kopaonik" to 71.5mBq/L fo "Skadarska" than in the spring water samples (dissolved uranium concentrations were very low » 10 mBq/L. The concentrations of all the present naturally occuring radionuclides: 238U, 234U, 232Th, 230Th, 228Th, 228Ra and 226Ra were determined by alpha/gamma spectrometric analysis. The activity ratios 234U/238U, 226Ra/230Th and 228Th/232Th, 228Ra/228Th were calculated and are discussed as an indication of the radioactive disequilibrium in bothe the 238U and 232Th radioactive series. The high contents of radium isotopes with respect to the equilibrium values expected from the respective parents 232Th/(232Th series and 230Th (238U series found in the spring water samples is the main evidence for the existence of significant radioactive disequilibrium in both the radioactive series.

  10. Comparison of Fluoride Levels in Tap and Bottled Water and Reported Use of Fluoride Supplementation in a United States–Mexico Border Community

    Directory of Open Access Journals (Sweden)

    Paloma I. Beamer

    2017-04-01

    Full Text Available BackgroundCompared to the general United States (U.S. population, Arizona counties along the U.S.–Mexico border have a higher prevalence of dental caries, which can be reduced with adequate fluoride exposure. Because of concern regarding local tap water quality, fluoride-free bottled water consumption is common in this region, raising concern that families are not receiving adequate fluoride to promote dental health.ObjectiveTo evaluate the levels of fluoride in tap and bottled water as well as the use of fluoride supplements in an Arizona border community.MethodsLow-income Latino households (n = 90 who report use of bottled water as their primary source of water intake were recruited. Participants completed a questionnaire about their and their children’s dental histories and use of fluoride supplements. Water samples (bottled and tap were collected from a subset of households (n = 30 for analysis of fluoride.ResultsFluoride detection levels were significantly greater (p = 0.02, Fisher’s exact test in tap water (average = 0.49 mg/dL than in bottled water, yet, the majority (22/30 were below the range for optimal dental health (0.7–1.2 mg/L. Concentration of fluoride in the majority (29/30 of bottled water samples was below the quantitative detection limit of 0.4 mg/L. Children were significantly less likely to have dental caries if they received fluoride varnishing treatments (p = 0.01, Fisher’s exact test, lived in households that reported using fluoridated mouthwash (p < 0.001, Fisher’s exact test, their parents received fluoride education (p = 0.01, Fisher’s exact test, and their parents reported visiting a dentist yearly (p < 0.001, Fisher’s exact test. Furthermore, none of the participants reported receiving recommendations from health-care providers about fluoride supplementation or variance in content by the type of water consumed.ConclusionAlthough fluoride was significantly more

  11. Physiological traits of Penicillium glabrum strain LCP 08.5568, a filamentous fungus isolated from bottled aromatized mineral water.

    Science.gov (United States)

    Nevarez, L; Vasseur, V; Le Madec, A; Le Bras, M A; Coroller, L; Leguérinel, I; Barbier, G

    2009-04-15

    Penicillium glabrum is a ubiquitous fungus distributed world wide. This fungus is a frequent contaminant in the food manufacturing industry. Environmental factors such as temperature, water activity and pH have a great influence on fungal development. In this study, a strain of P. glabrum referenced to as LCP 08.5568, has been isolated from a bottle of aromatized mineral water. The effects of temperature, a(w) and pH on radial growth rate were assessed on Czapeck Yeast Agar (CYA) medium. Models derived from the cardinal model with inflection [Rosso et al., 1993 An unexpected correlation between cardinal temperatures of microbial growth highlighted by a new model. J. Theor. Bio. 162, 447-463.] were used to fit the experimental data and determine for each factor, the cardinal parameters (minimum, optimum and maximum). Precise characterisation of the growth conditions for such a fungal contaminant, has an evident interest to understand and to prevent spoilage of food products.

  12. 矿泉水瓶再生设计研究%On the Regeneration Design of Mineral Water Bottle

    Institute of Scientific and Technical Information of China (English)

    庞军

    2015-01-01

    由于500ml左右矿泉水瓶瓶口具有统一的螺纹规格,其次,瓶体的容量也具有接近统一的标准,这就为矿泉水瓶再生设计的开发提供了必要的前提。市场上关于矿泉水瓶的再生设计多利用矿泉水瓶作为盛水的容器,而没有继续探讨其盛放小型垃圾(瓜子壳,纸屑,铅笔屑等)的功能。本文以绿色设计中延长产品生命周期的理念为原则,以联想法、模仿法及组合法等产品设计方法为指导,推出一款全新的使用矿泉水瓶衍生功能的产品,并着重介绍在本设计进行的过程中得出的新的设计方法:系统化条件下的功能衍生法。通过这款设计来说明现有产品衍生出新的功能的可行性,并总结一定的设计经验与设计方法,为以后进行相关设计奠定理论和方法基础。%500ml mineral water bottle has two characteristics: 1. the standard screw thread,2. the standard capacity. People often use mineral water bottles as containers of water instead of continuing to explore its function to contain small garbage (husk, scraps of paper, scraps, etc.). This thesis abides by the idea of green design and extends the product life, using method of associate, imitation and combination to introduce a new design to use mineral water bottle. From this design, a new design method in the design process is focused on: to explore more derivative functions under the system. Through this design, the feasibility is illustrated to explore more derivative functions, it is important to get more experience and methods to lay the foundation for the related design in the future.

  13. Effects of rooibos tea, bottled water, and a carbohydrate beverage on blood and urinary measures of hydration after acute dehydration.

    Science.gov (United States)

    Utter, Alan C; Quindry, John C; Emerenziani, Gian Pietro; Valiente, J Scott

    2010-04-01

    Rooibos tea contains polyphenol antioxidants, including flavonoids and phenolic acids that are potent free radical scavengers and has purported benefits for accelerated rehydration. The objective was to evaluate the effects of three different drinks (rooibos tea, bottled water, and a carbohydrate beverage) on blood and urinary markers of hydration after acute dehydration in collegiate wrestlers. Twenty-three athletes were recruited and followed a randomized, cross-over design with three different study arms comparing the effectiveness of rooibos tea, carbohydrate beverage (6% or 60 grams l(-1)), or bottled water (placebo) in promoting rehydration after a 3% reduction in body mass. Urine specific gravity (U(sg)) urine (U(osm)) and plasma osmolarity (P(osm)), and plasma volume were measured pre- and post dehydration and at 1-h after rehydration. Statistical analyses utilized a 3 (conditions) x 3 (times) repeated measures analysis of variance to test main effects. Significant interaction effects were found for P(osm) and U(osm), both of which remained below basleline after 1-h rehydration in the rooibos tea and water trials. No significant interaction effects were found for either urine U(sg) or plasma volume shift. The findings of this study demonstrate that rooibos tea was no more effective in promoting rehydration than plain water, with significant changes being found for P(osm) and U(osm) in the carbohydrate/electrolyte solution, in collegiate wrestlers after a 3% reduction in body mass and a rehydration period of 1-h when consuming 100% of their body weight loss.

  14. Determination of As, Cd, and Pb in Tap Water and Bottled Water Samples by Using Optimized GFAAS System with Pd-Mg and Ni as Matrix Modifiers

    Directory of Open Access Journals (Sweden)

    Sezgin Bakırdere

    2013-01-01

    Full Text Available Arsenic, lead, and cadmium were determined in tap and bottled water samples consumed in the west part of Turkey at trace levels. Graphite furnace atomic absorption spectrometry (GFAAS was used in all detections. All of the system parameters for each element were optimized to increase sensitivity. Pd-Mg mixture was selected as the best matrix modifier for As, while the highest signals were obtained for Pb and Cd in the case of Ni used as matrix modifier. Detection limits for As, Cd, and Pb were found to be 2.0, 0.036, and 0.25 ng/mL, respectively. 78 tap water and 17 different brands of bottled water samples were analyzed for their As, Cd, and Pb contents under the optimized conditions. In all water samples, concentration of cadmium was found to be lower than detection limits. Lead concentration in the samples analyzed varied between N.D. and 12.66 ± 0.68 ng/mL. The highest concentration of arsenic was determined as 11.54 ± 2.79 ng/mL. Accuracy of the methods was verified by using a certified reference material, namely, Trace Element in Water, 1643e. Results found for As, Cd, and Pb in reference materials were in satisfactory agreement with the certified values.

  15. Draft environmental impact report. California Department of Water Resources, Bottle Rock geothermal power plant, Lake County, CA

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The California Department of Water Resources (DWR) proposes to construct the Bottle Rock power plant, a 55 MW geothermal power plant, at The Geysers Known Geothermal Resource Area (KGRA). The plant is projected to begin operation in April of 1983, and will be located in Lake County near the Sonoma County line on approximately 7.2 acres of the Francisco leasehold. The steam to operate the power plant, approximately 1,000,000 pounds/h, will be provided by McCulloch Geothermal Corporation. The power plant's appearance and operation will be basically the same as the units in operation or under construction in the KGRA. The power plant and related facilities will consist of a 55 MW turbine generator, a 1.1 mile (1.81 km) long transmission line, a condensing system, cooling tower, electrical switchyard, gas storage facility, cistern, and an atmospheric emission control system. DWR plans to abate hydrogen sulfide (H/sub 2/S) emissions through the use of the Stretford Process which scrubs the H/sub 2/S from the condenser vent gas stream and catalytically oxides the gas to elemental sulfur. If the Stretford Process does not meet emission limitations, a secondary H/sub 2/S abatement system using hydrogen peroxide/iron catalyst is proposed. The Bottle Rock project and other existing and future geothermal projects in the KGRA may result in cumulative impacts to soils, biological resources, water quality, geothermal steam resources, air quality, public health, land use, recreation, cultural resources, and aesthetics.

  16. Multi-indicator assessment of water environment in government environmental auditing

    Institute of Scientific and Technical Information of China (English)

    HE Gui-zhen; LU Yong-long; MA Hua; WANG Xiao-long

    2007-01-01

    This study focuses on a multi-indicator assessment methodology for governmental environmental auditing of water protection programs. The environmental status of Wuli Lake in China was assessed using the global indicators (driver-status-response) developed by the CSD, and four additional indicators proposed by the author- water quality, pollution load, aquatic ecosystem status and lake sediment deposition. Various hydrological, chemical, biological and environmental parameters were used to estimate the values of the indicators for assessment of environmental status of the lake based on time series data sets for twenty years. The indicators proposed can be customized to meeting the needs for particular assessment of water protection programs. This method can be used to evaluate the performance of national environmental protection programs and provide technical support for environmental auditors.

  17. Quantitative determination of perchlorate in bottled water and tea with online solid phase extraction high-performance liquid chromatography coupled to tandem mass spectrometry.

    Science.gov (United States)

    Lin, Shu-Ling; Lo, Chih-Yu; Fuh, Ming-Ren

    2012-07-13

    Due to the similarity in ionic radius, perchlorate has been reported to inhibit the iodide intake in the thyroid gland, which may lead to low heart rate, weight gain, and fatigue. In recent years, the presence of perchlorate in drinking water, surface water, soil, and food supplies in the United States has raised a great concern on establishing the maximum residue limit (MRL) for perchlorate to reduce its possible adverse influence on human health. US EPA currently puts perchlorate on the final third Contamination Candidate List (CCL3) and suggests a health reference level at 4.9 μg L⁻¹. The MRL of perchlorate was therefore set at 5.0 μg L⁻¹ by the authors for method validation. In this study, large volume injection (up to 1-mL) and online solid phase extraction (SPE) were utilized for pre-concentrating perchlorate ions and removing unretained matrix components prior to reversed-phase HPLC analysis using ESI-tandem MS under the negative mode. After eluting perchlorate from online SPE, 0.1% formic acid solution was utilized for isocratic HPLC analysis without any organic solvent. Multiple reaction monitoring (MRM) and the internal standard, Cl₁₈O₄⁻, were utilized for quantitatively determining perchlorate in bottled water and bottled tea samples. Two linear ranges, 0.05-0.50 μg L⁻¹ and 0.50-10.00 μg L⁻¹, were established to better estimate the residual amounts of perchlorate in bottled water samples with a method detection limit (MDL, signal-to-noise ratio of 3) of 0.01 μg L⁻¹. The linear range was 1.50-10.00 μg L⁻¹ for bottled tea samples with a MDL of 0.5 μg L⁻¹. In addition, the proposed method was further validated based on the EU Commission Decision 2002/657/EC, including within-laboratory reproducibility, decision limit (CCα), and detection capability (CCβ) for bottled water and bottled tea samples. The intra-day/inter-day precision and accuracy as well as within-laboratory reproducibility were determined by calculating

  18. Evaluation of Direct 16S rDNA Sequencing as a Metagenomics-based Approach to Screening Bacteria in Bottled Water

    DEFF Research Database (Denmark)

    Hansen, Trine; Skånseng, Beate; Hoorfar, Jeffrey

    2013-01-01

    -specific assays, such as PCR, there is a need for generic methods to screen for unknown pathogenic microorganisms in samples. This work presents a metagenomics-based direct-sequencing approach for detecting unknown microorganisms, using Bacillus cereus (as a model organism for B. anthracis) in bottled water...... the presence of Bacillus. The analysis also revealed that background flora in the bottled water varied between the different water types that were included in the study. This method has the potential to be adapted to other biological matrices and bacterial pathogens for fast screening of unknown bacterial......Deliberate or accidental contamination of food, feed, and water supplies poses a threat to human health worldwide. A rapid and sensitive detection technique that could replace the current labor-intensive and time-consuming culture-based methods is highly desirable. In addition to species...

  19. [Simultaneous determination of iodate, chlorite and bromate in bottled drinking water by ion chromatography with post-column reaction and UV detection].

    Science.gov (United States)

    Zhou, Yiqi; Wang, Zijian; Xu, Yiping; Ma, Mei

    2007-05-01

    Iodate, chlorite and bromate in bottled water are disinfectant by-products (DBPs) from ozonation. The established methods for simultaneous determination of iodate, chlorite and bromate are mostly based on pre- or post-column chemical reaction in which the target compound was converted to another easily detectable species. However, the procedure suffers from several time-consuming reaction steps that involve multiple chemicals, or where the reagents themselves are toxic. In the present study, a rapid, highly sensitive, precise and accurate method was established, and a post-column reaction with sodium nitrite and acid solution of potassium bromide was employed to enhance sensitivity and to reduce interferences. Under optimized conditions, the method limits for iodate, chlorite and bromate were 0.5, 0.4 microg/L and 0.1 microg/L, respectively. Percentage recoveries of iodate, chlorite and bromate varied from 70.8% to 98.0%, 92.4% to 100% and 93.2% to 104.1% respectively with different spiked water samples. The proposed method was demonstrated for detecting the concentrations of iodate, chlorite and bromate in bottled water produced from different water sources. Results showed that severe bromate contamination was present in bottled mineral water purchased from Beijing supermarket, which used spring water or ground water as the sources.

  20. Highly flexible binder-free core-shell nanofibrous electrode for lightweight electrochemical energy storage using recycled water bottles

    Science.gov (United States)

    Shi, HaoTian H.; Naguib, Hani E.

    2016-08-01

    The creation of a novel flexible nanocomposite fiber with conductive polymer polyaniline (PAni) coating on a polyethylene terephthalate (PET) substrate allowed for increased electrochemical performance while retaining ideal mechanical properties such as very high flexibility. Binder-free PAni-wrapped PET (PAni@PET) fiber with a core-shell structure was successfully fabricated through a novel technique. The PET nanofiber substrate was fabricated through an optimized electrospinning method, while the PAni shell was chemically polymerized onto the surface of the nanofibers. The PET substrate can be made directly from recycled PETE1 grade plastic water bottles. The resulting nanofiber with an average diameter of 121 nm ± 39 nm, with a specific surface area of 83.72 m2 g-1, led to better ionic interactions at the electrode/electrolyte interface. The PAni active layer coating was found to be 69 nm in average thickness. The specific capacitance was found to have increased dramatically from pure PAni with carbon binders. The specific capacitance was found to be 347 F g-1 at a relatively high scan rate of 10 mV s-1. The PAni/PET fiber also experienced very little degradation (4.4%) in capacitance after 1500 galvanostatic charge/discharge cycles at a specific current of 1.2 A g-1. The mesoporous structure of the PAni@PET fibrous mat also allowed for tunable capacitance by controlling the pore sizes. This novel fabrication method offers insights for the utilization of recycled PETE1 based bottles as a high performance, low cost, highly flexible supercapacitor device.

  1. Snuff bottles

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Snuff bottles first appeared in China in the Ming dynasty(1368-1644) and, as their name suggests, were originally indeed used as a container for snuff tobacco, first of all by the Manchu, Mongols and Tibetans. The reason for their popularity at that time is to be found in the customs of those ethnic minorities: because those ethnic groups mainly led a nomadic life that entailed frequent use of hay or firewood.

  2. Breaking beer bottles with cavitation

    Science.gov (United States)

    Jung, Sunny; Fontana, Jake; Palffy-Muhoray, Peter; Shelley, Michael

    2009-03-01

    Hitting the top of a beer bottle, nearly full of water, with an open hand can cause the bottle to break, with the bottom separating from upper section. We have studied this phenomenon using a high-speed camera, and observed the formation, coalescence and collapse of bubbles. The breaking of glass is due to cavitation, typically occurring near the bottom edge. We make numerical estimates of the relevant physical parameters, and compare these with experimental observations.

  3. 定陶县桶装饮用水检测结果分析%Dingtao bottled drinking water test results analysis

    Institute of Scientific and Technical Information of China (English)

    康凤春

    2014-01-01

    Objective To investigate the Dingtao County bottled drinking water passing rate indicators, analysis of the safety of drinking water, according to the reasons, some improvement measures, and improve the hygienic quality of bottled water. Methods According to the national standard of bottled drinking water for the microbial indexes and physiochemical indexes determination;the quality of bottled water and non formal manufacturers and formal manufacturers compared. Results The of 96 bottled drinking water compliance rate was 70%, 29 unqualified water samples, 28 bacteria exceed the standard, 11 conductivity exceed the stan-dard, 5 copies 4 copies of zinc chloride unqualified, unqualified, other indicators are all qualified;non formal manufacturers of un-qualified rate (65%) was significantly higher than that of the regular factory (21%), the two have very significant difference (P<0.01), formal manufacturers of drinking water quality is better than the former. Conclusion The bottled drinking water qualified rate of total bacterial count was low, the qualified rate of informal manufacturers lower. Bottled drinking the county water exists improper handling or re pollution problems in the production process, quality of health is not optimistic, more attention should be paid to the relevant departments and manufacturers, and strengthen supervision and management, and to remind people attention for bottled drinking water.%目的:了解定陶县桶装饮用水指标合格率,分析其饮用水安全性,针对原因,采取改进措施,提高桶装水的卫生质量。方法按国家标准方法对桶装饮用水进行微生物指标和理化指标测定;并将非正规厂家和正规厂家的桶装水质量相比较。结果96份桶装饮用水合格率为70%,29份不合格水样中,28份菌落总数超标,11份电导率超标,5份氯化物不合格,4份锌不合格,其他指标全部合格;非正规厂家的不合格率(65%

  4. Magnetic Bead and Fluorescent Silica Nanoparticles Based Optical Immunodetection of Staphylococcal Enterotoxin B (SEB in Bottled Water

    Directory of Open Access Journals (Sweden)

    Shiva K. RASTOGI

    2009-10-01

    Full Text Available Staphylococcal enterotoxins (SEs are a major cause of food-borne diseases, most commonly SEs assayed immunologically with ELISA. An immunoassay based on fluorescein dye doped silica dioxide nanoparticles (F-SiNPs and magnetic bead (MB is described here for the detection of staphylococcal enterotoxin B (SEB. F-SiNPs have unique optical properties which make them attractive for biosensing. The water-in-oil (W/O reverse microemulsion method was used for the synthesis of F-SiNPs (~ 95 nm of diameter. The F-SiNPs were characterized using SEM, TEM and FTIR spectroscopy. The detection of SEB is preformed in PBS buffer, and bottled drinking water using sandwich immunoassay format. Target analytes were captured using MBs modified with the antigen-specific “capture” antibody, and detected using F-SiNP labeled secondary antigen-specific antibody. We report a limit of detection down to 1 ng/mL SEB spiked sample in less than 2 hr assay time using fluorocount method. This study demonstrates the bio warfare agent SEB capture by magnetic beads and detection using F-SiNPs.

  5. Stopping the Bottle

    Science.gov (United States)

    ... more difficult it can be to break the bottle habit. Longer bottle use may lead to cavities or ... is coming later. The next week, eliminate another bottle feeding and provide milk in a cup instead. Try ...

  6. Effects of residual water on microtensile bond strength of one-bottle dentin adhesive systems with different solvent bases

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-xing; HUANG Cui; ZHENG Tie-li; WANG Sa; CHENG Xiang-rong

    2005-01-01

    Background The wet-bonding technique is recommended for the one-bottle dentin adhesive systems, but the moisture concept varies widely among the instructions of manufacturers as well as among investigators. The aim of this study was to evaluate the effects of different dentin surface moisture on the microtensile bond strength(s) of an ethanol/water-based adhesive system and an acetone-based system to dentin. Methods Forty intact human premolars extracted for orthodontic reasons were used. Superficial occlusal flat dentin surfaces of these premolars were exposed, finished with wet 600-grit silicon carbide paper. Under four wet and dry conditions (overwet, blot dry, one-second dry and desiccated), resin composite was bonded to dentin by using Single Bond (SB) or Prime & Bond NT (PB) according to the manufacturers' instructions. The teeth were longitudinally sectioned in the "x" and "y" directions to obtain bonded beams with a cross-sectional area of 0.81 mm2 with a slow-speed diamond saw. The bonded specimens were tested in tension at a crosshead speed of 1 mm/min until failure of the bonds. Failure modes were observed with a scanning electron microscope. The mean bond strengths were analyzed by one-way ANOVA and Turkey's test. Results The bond strength of the overwet/SB, blot dry/SB, one-second dry/SB and desiccated/SB groups was 10.87 Mpa, 22.47 Mpa, 24.91 Mpa and 12.99 Mpa, respectively. The bond strength of the overwet/PB, blot dry/PB, one-second dry/PB and desiccated/PB groups was 10.02 Mpa, 20.67 Mpa, 21.82 Mpa and 10.09 Mpa, respectively. For both SB and PB, the blot dry group and one-second dry group revealed significantly higher bond strengths than the overwet and desiccated groups (P<0.05). Conclusions In order to achieve the highest bond strength to dentin, keeping the dentin surface in an appropriately moist condition is critical for the one-bottle dentin adhesive systems with ethanol/water or acetone solvent.

  7. Salt content in ready-to-eat food and bottled spring and mineral water retailed in Novi Sad

    Directory of Open Access Journals (Sweden)

    Trajković-Pavlović Ljiljana B.

    2015-01-01

    Full Text Available Introduction. Salt intake above 5 g/person/day is a strong independent risk factor for hypertension, stroke and cardiovascular diseases. Published studies indicate that the main source of salt in human diet is processed ready-to-eat food, contributing with 65-85% to daily salt intake. Objective. The aim of this paper was to present data on salt content of ready-to-eat food retailed in Novi Sad, Serbia, and contribution of the salt contained in 100 g of food to the recommended daily intake of salt for healthy and persons with cardiovascular disease (CVD risk. Methods. In 1,069 samples of ready-to-eat food, salt (sodium chloride content was calculated based on chloride ion determined by titrimetric method, while in 54 samples of bottled water sodium content was determined using flame-photometry. Food items in each food group were categorized as low, medium or high salt. Average salt content of each food group was expressed as a percentage of recommended daily intake for healthy and for persons with CVD risk. Results. Average salt content (g/100 g ranged from 0.36±0.48 (breakfast cereals to 2.32±1.02 (grilled meat. The vast majority of the samples of sandwiches (91.7%, pizza (80.7%, salami (73.9%, sausages (72.9%, grilled meat (70.0% and hard cheese (69.6% had a high salt profile. Average amount of salt contained in 100 g of food participated with levels ranging from 7.2% (breakfast cereals to 46.4% (grilled meat and from 9.6% to 61.8% in the recommended daily intake for healthy adult and person with CVD risk, respectively. Average sodium content in 100 ml of bottled spring and mineral water was 0.33±0.30 mg and 33±44 mg, respectively. Conclusion. Ready-to-eat food retailed in Novi Sad has high hidden salt content, which could be considered as an important contributor to relatively high salt consumption of its inhabitants.

  8. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 03 June 1981 - 09 June 1981 (NODC Accession 8100724)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from June 3, 1981 to June 9, 1981. Data...

  9. Water physics and chemistry data from bottle casts from MULTIPLE SHIPS and other platforms from the NW Atlantic (limit-40 W) from 10 January 1951 to 18 April 1957 (NODC Accession 7200385)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from MULTIPLE SHIPS and other platforms from NW Atlantic (limit-40 W) from 10 January 1951 to 18...

  10. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 27 July 1982 - 02 August 1982 (NODC Accession 8400002)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from July 27, 1982 to August 2, 1982....

  11. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 15 April 1981 - 20 April 1981 (NODC Accession 8100656)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from April 15, 1981 to April 20, 1981....

  12. Water physical and chemical data from current meter and bottle casts from the COLUMBUS ISELIN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 27 October 1975 - 06 November 1975 (NODC Accession 7700454)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the COLUMBUS ISELIN from October 27, 1975 to November 6, 1975. Data were...

  13. Water physics and chemistry data from moored current meter and bottle casts in the Gulf of Mexico as part of the Brine Disposal project, 04 December 1979 - 11 June 1980 (NODC Accession 8000476)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Gulf of Mexico from December 4, 1979 to June 11, 1980. Data were...

  14. Water temperature, meteorological, and other data from bottle casts and other instruments from the South Atlantic, Equatorial Atlantic, and other locations from the STRELOK VITYAZ and other platforms from 02 May 1862 to 11 July 1877 (NODC Accession 0000500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water temperatures, meteorological, and other data were collected bottle casts and other instruments from 02 May 1862 to 11 July 1877. Data were collected from the...

  15. Water physical and chemical data from current meter and bottle casts from the GILLISS as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 04 February 1976 - 14 September 1976 (NODC Accession 7700477)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the GILLISS and other platforms from February 4, 1976 to September 14,...

  16. Water physical and chemical data from current meter and bottle casts from the G.W. PIERCE as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 22 October 1975 - 31 October 1975 (NODC Accession 8200067)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the G.W. PIERCE from October 22, 1975 to October 31, 1975. Data were...

  17. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 02 September 1980 - 06 September 1980 (NODC Accession 8100628)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from September 2, 1980 to September 6,...

  18. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 28 May 1982 - 04 June 1982 (NODC Accession 8300008)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from May 28, 1982 to June 4, 1982. Data...

  19. Water physics and chemistry data from bottle casts from the GERDA as part of the Rosenstiel School of Marine and Atmospheric Science (RSMAS) project from 20 July 1955 to 29 May 1957 (NODC Accession 7000057)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from bottle casts from the GERDA from 20 July 1955 to 29 May 1957. Data were collected as part of the Rosenstiel...

  20. Chemical data from moored current meter, bottle casts, and other instruments in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 18 May 1978 - 19 October 1978 (NODC Accession 7900280)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical data were collected using moored current meter, bottle casts, and other instruments in the Coastal Waters of New Jersey from May 18, 1978 to October 19,...

  1. Water physics and chemistry data from moored current meter and bottle casts in the New York Bight as part of the North East Monitoring Program (NEMP) project, 10 April 1984 - 31 October 1984 (NODC Accession 8500225)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the New York Bight from April 10, 1984 to October 31, 1984. Data were...

  2. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 21 April 1980 - 18 July 1980 (NODC Accession 8100501)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from April 21, 1980 to July 18, 1980....

  3. 桶装饮用水质量测评指标权重AHP研究%The Research of AHP in Bottled Drinking Water Quality Evaluation Index Weight

    Institute of Scientific and Technical Information of China (English)

    张亚东

    2011-01-01

    Through the study of analytic hierarchy process(AHP) of the basic principles and steps and extensive literature on reading at home and abroad,bottled drinking water quality evaluation index weights were studied AHP in this paper.This paper identifies national standards in bottled drinking water which is more important indicators and what factors can cause these indicators exceeded.%通过学习层次分析法(AHP)的基本原理和步骤,阅读国内外大量文献,对桶装饮用水质量测评指标权重AHP进行研究,确定桶装饮用水国家标准中那些指标比较重要,哪些影响因素可以引起这些指标超标。

  4. Evaluation of Chemical and Microbiological Quality in 21 Brands of Iranian Bottled Drinking Waters in 2012: A Comparison Study on Label and Real Contents

    Directory of Open Access Journals (Sweden)

    M. Moazeni

    2013-01-01

    Full Text Available The purpose of this study was to evaluate and compare chemical and microbiological quality of the 21 Iranian bottled drinking waters reported on manufacturer's labeling and standards in 2012. Samples were analyzed for chemical properties K+, F−, SO4 2−, Cl−, Mg2+, Ca2+, and pH. Total and fecal coliform and heterotrophic plate counts of selected samples were analyzed by MPN and HPC tests, respectively, for three months. Finally, the labeled and real contents of the samples were compared. Potassium and sulfate ions about 43 and 52 percent of studied sample contents had values higher than label amounts, respectively. Ca2+, Cl− ions, and pH were about 71, 48, and 67 percent, respectively, less than label values. Total and fecal coliforms had negative results. The mean concentrations and standard deviations for K+, Cl−, pH, Ca2+, Mg2+, SO4 2−, and HPC were 1.13 ± 1.06, 16.39 ± 31.97, 6.6 ± 0.7, 28.35 ± 10.34, 86.58 ± 33.21, 24.17 ± 17.30 mg/L, and 16855 ± 25603 cfu/mL, respectively. Thus, there is possibility of microorganisms’ growth in favorite conditions in bottled water. It was imperative to assess the public health risks in bottled water in Iran.

  5. levels of common ions in bottled mineral waters consumed in addis ...

    African Journals Online (AJOL)

    Preferred Customer

    supports industry, produces hydroelectricity, ... wastewater or other organic wastes into surface ... biological and chemical constituents of drinking ..... water during water treatment at the source ..... (1998); b EU/EC = European Community Council Directive 98/83/EC, Parametric Values (1998), c China for the standard.

  6. Concentration of Ra-226 in Malaysian Drinking and Bottled Mineral Water

    Science.gov (United States)

    Amin, Y. B. Mohd; Jemangin, M. H.; Mahat, R. H.

    2010-07-01

    The concentration of the radionuclide 226Ra was determined in the drinking water which was taken from various sources. It was found that the concentration varies from non-detectable (ND) to highest value of 0.30 Bq per liter. The concentration was found to be high in mineral water as compare with surface water such as domestic pipe water. Some of these values have exceeded the EPA (Environmental Protection Agency) of America regulations. The activity concentrations obtained are compared with data from other countries. The estimated annual effective doses from drinking the water are determined. The values obtained range from 0.02 mSv to about 0.06 mSv per year.

  7. The U.S. Military’s Reliance on Bottled Water During Military Operations

    Science.gov (United States)

    2011-06-17

    ran out of water and had to surrender. Their supply lines were cut and they were forced to drink the blood of donkeys and their own urine to survive...technology that can remove enough arsenic content to make water safe to drink, producing approximately 1 liter every 8 minutes. 5) TARDEC is developing...Packaging System." National Driller. http://www.nationaldriller.com/ Articles /Feature_Article/BNP_GUID_9-5-2006 (accessed October 14, 2010). Gleick

  8. Effect of sunlight exposure on the release of intentionally and/or non-intentionally added substances from polyethylene terephthalate (PET) bottles into water: chemical analysis and in vitro toxicity.

    Science.gov (United States)

    Bach, Cristina; Dauchy, Xavier; Severin, Isabelle; Munoz, Jean-François; Etienne, Serge; Chagnon, Marie-Christine

    2014-11-01

    The effect of sunlight exposure on chemical migration into PET-bottled waters was investigated. Bottled waters were exposed to natural sunlight for 2, 6 and 10 days. Migration was dependent on the type of water. Formaldehyde, acetaldehyde and Sb migration increased with sunlight exposure in ultrapure water. In carbonated waters, carbon dioxide promoted migration and only formaldehyde increased slightly due to sunlight. Since no aldehydes were detected in non-carbonated waters, we conclude that sunlight exposure has no effect. Concerning Sb, its migration levels were higher in carbonated waters. No unpredictable NIAS were identified in PET-bottled water extracts. Cyto-genotoxicity (Ames and micronucleus assays) and potential endocrine disruption effects (transcriptional-reporter gene assays) were checked in bottled water extracts using bacteria (Salmonella typhimurium) and human cell lines (HepG2 and MDA-MB453-kb2). PET-bottled water extracts did not induce any toxic effects (cyto-genotoxicity, estrogenic or anti-androgenic activity) in vitro at relevant consumer-exposure levels. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Dental fluorosis: concentration of fluoride in drinking water and consumption of bottled beverages in school children.

    Science.gov (United States)

    Pérez-Pérez, N; Torres-Mendoza, N; Borges-Yáñez, A; Irigoyen-Camacho, M E

    2014-01-01

    The purpose of the study was to identify dental fluorosis prevalence and to analyze its association with tap water fluoride concentration and beverage consumption in school children from the city of Oaxaca, who were receiving fluoridated salt. A cross-sectional study was performed on elementary public school children. Dean's Index was applied to assess dental fluorosis. The parents of the children who were studied completed a questionnaire about socio-demographic characteristics and type of beverages consumed by their children. A total of 917 school children participated in this study. Dental fluorosis prevalence was 80.8%. The most frequent fluorosis category was very mild (41.0%), and 16.4% of the children were in the mild category. The mean water fluoride concentration was 0.43 ppm (±0.12). No association was detected between tap water fluoride concentration and fluorosis severity. The multinomial regression model showed an association among the mild fluorosis category and age (OR = 1.25, [95% CI 1.04, 1.50]) and better socio-economic status (OR = 1.78, [95% CI 1.21, 2.60]), controlling for fluoride concentration in water. Moderate and severe fluorosis were associated with soft drink consumption (OR = 2.26, [95% IC 1.01, 5.09]), controlling for age, socio-economic status, and water fluoride concentration. The prevalence of fluorosis was high. Mild fluorosis was associated with higher socio-economic status, while higher fluorosis severity was associated with soft drink consumption.

  10. Assessment of carcinogenic and non-carcinogenic risk lead in bottled water in different age groups in Bandar Abbas Ciry, Iran.

    Science.gov (United States)

    Fakhri, Yadolah; Mohseni, Seyed Mohsen; Jafarzadeh, Saeedeh; Langarizadeh, Ghazaleh; Moradi, Bigard; Zandsalimi, Yahya; Rahimizadeh, Aziz; Mirzaei, Maryam

    2015-01-23

    The presence of heavy metals such as lead in drinking water resources can be dangerous for human because of toxicity and biological accumulation. The consumption of water or food which contains lead in high concentration can lead to prevent from Hemoglobin Synthesis (Anemia) and Kidney diseases. In this present study, the researcher collected 432 samples of bottled water in the popular marks in summer and winter from the surface of Bandar Abbas. The lead concentration was measured by atomic absorption Spectrophotometer in model DR2800 through the Dithizone method. CDI, R and HQ which are caused by lead for adult men, women and children, have been calculated and evaluated through the equations of EPA and WHO. The mean concentration of lead, which is 3.46± 0.47 µg/l, and its range, which is 1.9-17.6 µg/l, are lower than the guideline of WHO (10 µg/l) and MPC of EPA is (15 µg/l). But the 40 samples of the bottled water (9.2%) have the concentration higher than guideline WHO and 8 samples (1.85%) has the concentration higher than the permissible limits of the EPA. CDI in different age groups is as following manner: Children>adult men>adult women. CDI in children is more than twice as much as in the adult men and women. The R of lead for children (24E-7), adult men (11E-7) and for adult women (10E-7) are more than the acceptable level of R in EPA (1E-6) but less than the acceptable level of R in WHO (1E-4). Since HQ of adult men (34E-5), adult women (31E-5) and children (84E-5), is lower than 1, it can be said that the population of Bandar Abbas is in a safe area regarding the HQ of the bottled water's lead.

  11. A method for improving reliability and relevance of LCA reviews: the case of life-cycle greenhouse gas emissions of tap and bottled water.

    Science.gov (United States)

    Fantin, Valentina; Scalbi, Simona; Ottaviano, Giuseppe; Masoni, Paolo

    2014-04-01

    The purpose of this study is to propose a method for harmonising Life Cycle Assessment (LCA) literature studies on the same product or on different products fulfilling the same function for a reliable and meaningful comparison of their life-cycle environmental impacts. The method is divided in six main steps which aim to rationalize and quicken the efforts needed to carry out the comparison. The steps include: 1) a clear definition of the goal and scope of the review; 2) critical review of the references; 3) identification of significant parameters that have to be harmonised; 4) harmonisation of the parameters; 5) statistical analysis to support the comparison; 6) results and discussion. This approach was then applied to the comparative analysis of the published LCA studies on tap and bottled water production, focussing on Global Warming Potential (GWP) results, with the aim to identify the environmental preferable alternative. A statistical analysis with Wilcoxon's test confirmed that the difference between harmonised GWP values of tap and bottled water was significant. The results obtained from the comparison of the harmonised mean GWP results showed that tap water always has the best environmental performance, even in case of high energy-consuming technologies for drinking water treatments. The strength of the method is that it enables both performing a deep analysis of the LCA literature and obtaining more consistent comparisons across the published LCAs. For these reasons, it can be a valuable tool which provides useful information for both practitioners and decision makers. Finally, its application to the case study allowed both to supply a description of systems variability and to evaluate the importance of several key parameters for tap and bottled water production. The comparative review of LCA studies, with the inclusion of a statistical decision test, can validate and strengthen the final statements of the comparison.

  12. 桶装水智能配送系统的研究与实现%Research and Implementation of Bottled Water Smart Distribution System

    Institute of Scientific and Technical Information of China (English)

    杨臣; 王庭有; 李世振

    2011-01-01

    桶装水智能配送系统是一种利用固定电话线将饮水机中水量不足的信号长距离、准确、及时地传到服务端的系统,设计包括饮水机中水量不足的信号采集,以单片机为中心的自动拨号系统以及服务端用户信息管理系统的建立,解决了用户打电话要水的繁琐和服务端送水不及时的问题.%Bottled water smart distribution system is make for drinking water shortage signals over long distances accurately, timely to reach the server system using fixed telephone lines. Design and establishment, including drinking water shortage signal acquisition, the chip-centric services, automatic dialing systems and end information management system, solve the complicated and untimely questions of calling water service and bottled water.

  13. MODELING IN THE PROCESSES OF CHOICE OF THE COMPANY DELIVERING BOTTLED WATER BY THE CONSUMERS ON THE BACKGROUND OF REFLEXIVE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    V. Skitsko

    2014-06-01

    Full Text Available In this work the problem of high quality drinking water provision is described and analyzed. It is shown that a person may obtain such water by various ways one of which is bottled water delivery by specialized companies. The existence of numerous players on drinking water market stipulates the occurrence of the number of problems – in particular, the choice of the delivering water company by the consumer and fight of such companies for the consumer. The work proposes to apply a reflexive approach in order to influence the choice of the consumer, which allows the company to make him take the "right" decision. For solving the problem the classical and fuzzy model of reflexive management are described.

  14. Evaluation of direct 16S rDNA sequencing as a metagenomics-based approach to screening bacteria in bottled water.

    Science.gov (United States)

    Hansen, Trine; Skånseng, Beate; Hoorfar, Jeffrey; Löfström, Charlotta

    2013-09-01

    Deliberate or accidental contamination of food, feed, and water supplies poses a threat to human health worldwide. A rapid and sensitive detection technique that could replace the current labor-intensive and time-consuming culture-based methods is highly desirable. In addition to species-specific assays, such as PCR, there is a need for generic methods to screen for unknown pathogenic microorganisms in samples. This work presents a metagenomics-based direct-sequencing approach for detecting unknown microorganisms, using Bacillus cereus (as a model organism for B. anthracis) in bottled water as an example. Total DNA extraction and 16S rDNA gene sequencing were used in combination with principle component analysis and multicurve resolution to study detection level and possibility for identification. Results showed a detection level of 10(5) to 10(6) CFU/L. Using this method, it was possible to separate 2 B. cereus strains by the principal component plot, despite the close sequence resemblance. A linear correlation between the artificial contamination level and the relative amount of the Bacillus artificial contaminant in the metagenome was observed, and a relative amount value above 0.5 confirmed the presence of Bacillus. The analysis also revealed that background flora in the bottled water varied between the different water types that were included in the study. This method has the potential to be adapted to other biological matrices and bacterial pathogens for fast screening of unknown bacterial threats in outbreak situations.

  15. Screening of endocrine-disrupting phenols, herbicides, steroid estrogens, and estrogenicity in drinking water from the waterworks of 35 Italian cities and from PET-bottled mineral water.

    Science.gov (United States)

    Maggioni, Silvia; Balaguer, Patrick; Chiozzotto, Claudia; Benfenati, Emilio

    2013-03-01

    We investigated contamination by endocrine-disrupting chemicals in drinking water from 35 major Italian cities and five popular Italian brands of bottled mineral water. The quality of Italian drinking water was assessed by combing chemical analysis with bioassay to quantify specific estrogenic contaminants and to characterize the actual biological effect of the mixture of chemicals present in drinking water including the contribution of not targeted compounds. The selected contaminants were natural and synthetic steroid estrogens, alkylphenols and bisphenol A, linuron, triazine herbicides, and their metabolites. A specific analytical method was developed based on solid phase extraction of 1 L of water and concentration to 100 μL for quantification by electrospray ionization liquid chromatography tandem mass spectrometry, achieving quantification limits of 0.05-0.36 ng/L for herbicides and 0.64-7.70 ng/L for steroids and phenols. No steroid estrogens were detected in any of the samples, while bisphenol A and nonylphenols were detected in the ranges of 0.82-102.00 and 10.30-84.00 ng/L respectively. Herbicides and their degradation products, when present, were found from slightly above the quantification limits up to 49.91 ng/L, mainly from cities in northern Italy. Chemical analyses were complemented by the performance of a bioassay for the determination of the estrogenic activity in the extracts based on the transactivation of estrogen receptor α-transfected reporter HeLa-ERE-Luciferase-Neomycin cell line. Activity was generally low with maximum estrogenicity of 13.6 pg/L estradiol equivalents.

  16. Design, construction and testing of the CRALF bottle for discrete manual sub-aquatic water sampling; Diseno, contrucccion y prueba de la botella CRALF de muestreo puntual de agua para uso manual en entornos subacuaticos

    Energy Technology Data Exchange (ETDEWEB)

    Pardo Juez, A.; Rodriguez Casals, C.

    2007-07-01

    Due to the absence in the market of an underwater sampling bottle, that can be handled safely and accurately by scuba divers, even in cold water conditions, we hereby present and describe the design of the discrete water sampling bottle CRALF. This is a sturdy and easy-to-operate bottle, even with the thick gloves necessary in cold water dives. Its simple but ingenious design allows its home-made making without using specialized tools, taking advantage of materials available in the general market. Three prototypes have been built and successfully tested in the cold water of the Pyrenes glacial lakes (ibones) of Banos and Sobocos between 20 degree centigree and 2 degree centigree and at depths between 6 m and 12 m. (Author) 18 refs.

  17. Stopping the Bottle

    Science.gov (United States)

    ... is coming later. The next week, eliminate another bottle feeding and provide milk in a cup instead. Try to do this when your baby is sitting at the table in a high chair. Generally, the last bottle to stop should be the nighttime bottle. That ...

  18. Occurrence of Cryptosporidial Oocysts and Giardia Cysts in Bottled Mineral Water Commercialized in the City of Campinas, State of São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    RMB Franco

    2002-03-01

    Full Text Available The consumption of bottled mineral water has significantly increased in Brazil so that it is in the interest of public health to determine the parasitological and microbiological status of some brands of Brazilian mineral water available in the town of Campinas, São Paulo, Brazil. For this purpose, detection of protozoa by direct immunofluorescence technique and microbiological parameters were determined for each specimen after membrane filtration. Giardia cysts were not present while cryptosporidial oocysts were detected in two samples. The counts of protozoa varied from 0.2 to 0.5 oocysts/l. The detected level of Pseudomonas aeruginosa and heterotrophic bacteria reflected the level of organic enrichment of the water.

  19. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; comparison of a nitric acid in-bottle digestion procedure to other whole-water digestion procedures

    Science.gov (United States)

    Garbarino, John R.; Hoffman, Gerald L.

    1999-01-01

    A hydrochloric acid in-bottle digestion procedure is used to partially digest wholewater samples prior to determining recoverable elements by various analytical methods. The use of hydrochloric acid is problematic for some methods of analysis because of spectral interference. The inbottle digestion procedure has been modified to eliminate such interference by using nitric acid instead of hydrochloric acid in the digestion. Implications of this modification are evaluated by comparing results for a series of synthetic whole-water samples. Results are also compared with those obtained by using U.S. Environmental Protection Agency (1994) (USEPA) Method 200.2 total-recoverable digestion procedure. Percentage yields that use the nitric acid inbottle digestion procedure are within 10 percent of the hydrochloric acid in-bottle yields for 25 of the 26 elements determined in two of the three synthetic whole-water samples tested. Differences in percentage yields for the third synthetic whole-water sample were greater than 10 percent for 16 of the 26 elements determined. The USEPA method was the most rigorous for solubilizing elements from particulate matter in all three synthetic whole-water samples. Nevertheless, the variability in the percentage yield by using the USEPA digestion procedure was generally greater than the in-bottle digestion procedure, presumably because of the difficulty in controlling the digestion conditions accurately.

  20. Superficial View on the Development of Bottled Water Market at Home and Abroad%浅谈国内外瓶装水市场发展情况

    Institute of Scientific and Technical Information of China (English)

    邓秀琼; 梁洁红; 程朝阳

    2001-01-01

    In this paper, the status of the bottled water market, the main brand and the product packing in American, Italy, Japan and China were introduced, the development characters of bottled water were also introduced.%介绍了美国、意大利、日本及中国瓶装水市场情况,主要品牌及产品包装的情况,还介绍了瓶装水产品发展的特点。

  1. Effect of carbonated beverages, coffee, sports and high energy drinks, and bottled water on the in vitro erosion characteristics of dental enamel.

    Science.gov (United States)

    Kitchens, Michael; Owens, Barry M

    2007-01-01

    This study evaluated the effect of carbonated and non-carbonated beverages, bottled and tap water, on the erosive potential of dental enamel with and without fluoride varnish protection. Beverages used in this study included: Coca Cola Classic, Diet Coke, Gatorade sports drink, Red Bull high-energy drink, Starbucks Frappuccino coffee drink, Dasani water (bottled), and tap water (control). Enamel surfaces were coated with Cavity Shield 5% sodium fluoride treatment varnish. Twenty-eight previously extracted human posterior teeth free of hypocalcification and caries were used in this study. The coronal portion of each tooth was removed and then sectioned transverse from the buccal to lingual surface using a diamond coated saw blade. The crown sections were embedded in acrylic resin blocks leaving the enamel surfaces exposed. The enamel surfaces were polished using 600 to 2000 grit abrasive paper and diamond paste. Test specimens were randomly distributed to seven beverage groups and comprised 4 specimens per group. Two specimens per beverage group were treated with a fluoride varnish while 2 specimens did not receive fluoride coating. Surface roughness (profilometer) readings were performed at baseline (prior to fluoride treatment and immersion in the beverage) and again, following immersion for 14 days (24 hours/day). The test beverages were changed daily and the enamel specimens were immersed at 37 degrees C. Surface roughness data was evaluated using multiple factor ANOVA at a significance level of pStarBucks coffee, Dasani water, and tap water. Fluoride varnish was not a significant impact factor; however, beverage (type) and exposure time were significant impact variables. Both carbonated and non-carbonated beverages displayed a significant erosive effect on dental enamel; however, fluoride varnish treatments did not demonstrate a significant protective influence on enamel surfaces.

  2. FORENSIC AUDIT

    OpenAIRE

    Rozas Flores, Alan Errol; Facultad de Ciencias Contables, Universidad Nacional Mayor de San Marcos

    2014-01-01

    The forensic audit is an audit specialist in obtaining evidence to turn them into tests, which are presented in the forum that is in the courts of justice, in order to check crime or settle legal disputes. Currently, major efforts are being carried out by compliance audits and comprehensive audits need to be retrofitted with legal research, to minimize the impunity that comes before economic and financial crimes, such as administrative corruption, corporate fraud and money laundering assets. ...

  3. Ramón y Cajal as an Analytical Chemist of Bottled Water? Use (and Misuse of the Great Savant’s Repute by the Industry

    Directory of Open Access Journals (Sweden)

    Lazaros C. Triarhou

    2013-03-01

    Full Text Available The name of the eminent neurohistologist Santiago Ramón y Cajal (1852-1934 was occasionally mentioned in commercial labels by the Spanish industry advertising mineral waters from natural spring sources and their medical benefits. Concomitantly with his landmark neuroanatomical research, Cajal had served as director of the Alfonso XIII National Institute of Hygiene. In that capacity, his name had to be included in certificates as a mere bureaucratic formality. Cajal had an early interest in bacteriology, and introduced a pioneering chemical vaccine against cholera during the 1885 epidemic in Spain. However, in a letter to the Madrid press, he vehemently denied any involvement with actual chemical analyses or commercial promotion of products such as bottled water, medicinal wines, disinfectants, and even toothpaste. In this episode, we realize that Cajal’s view was absolutely contrary to the impression one might have gathered on the basis of the commercial documents alone.

  4. Dramatic enhancement of solar disinfection (SODIS) of wild Salmonella sp. in PET bottles by H2O2 addition on natural water of Burkina Faso containing dissolved iron.

    Science.gov (United States)

    Sciacca, Frédéric; Rengifo-Herrera, Juliàn A; Wéthé, Joseph; Pulgarin, César

    2010-02-01

    Disinfection of surface water containing dissolved iron (0.3 mg L(-1)) at natural neutral pH ( approximately 7.5) was carried out via solar disinfection (SODIS) treatment in PET bottles with H(2)O(2) (10 mg L(-1)). Wild coliforms and Salmonella sp. were monitored for 6 h of sunlight irradiation and 72 h of dark post-treatment period. In our conditions, SODIS treatment could not avoid Salmonella sp. re-growth during dark storage, meanwhile the addition of 10 mg L(-1) of H(2)O(2) showed a strong enhancement of the inactivation rate without any re-growth of both bacteria. Finally, total coliforms (Escherichia coli included) demonstrated to be an inappropriate indicator for monitoring bacterial contamination in water during solar disinfection processes.

  5. Stability of Vancomycin 25 mg/mL in Ora-Sweet and Water in Unit-Dose Cups and Plastic Bottles at 4°C and 25°C.

    Science.gov (United States)

    Ensom, Mary H H; Decarie, Diane; Lakhani, Anisha

    2010-09-01

    Solutions of vancomycin for oral administration are not available commercially in Canada or the United States but are needed for patients who cannot swallow capsules. To evaluate the stability of vancomycin solutions stored in unit-dose cups and plastic bottles under refrigeration (4°C) and at room temperature (25°C) for up to 75 days. Vancomycin 25 mg/mL in Ora-Sweet vehicle and water (1:1 ratio by volume) was dispensed into opaque blue polyethylene unit-dose cups with aluminum seal (14 replicates) or amber plastic prescription bottles (6 replicates). Seven cups and 3 bottles were refrigerated (4°C), and the remainder of the containers were stored at room temperature (25°C). At the time of preparation and at 15, 30, 40, 50, 63, and 75 days, 3 aliquots were collected from one of the cups and from every bottle and were stored frozen (-85°C) until the time of analysis. Physical characteristics were evaluated at each time point, including measurement of pH and visual assessment of colour and precipitation. After thawing, the samples were analyzed in triplicate by a validated stability-indicating high-performance liquid chromatography method. A solution was considered stable if 90% of the initial concentration of vancomycin was maintained. No notable changes in colour, taste, or pH were observed in vancomycin solutions stored in the unit-dose cups at 4°C or 25°C or in the plastic bottles stored at 4°C over the 75-day study period. Starting on day 63, a white precipitate was observed in the solutions stored in plastic bottles at 25°C, but there were no notable changes in taste or pH during the 75-day period. The 95% confidence interval of the slope of the curve relating concentration to time, determined by linear regression, indicated that vancomycin solutions stored in cups or bottles at 4°C would maintain at least 93.6% of the initial vancomycin concentration for 75 days and that solutions stored at 25°C would maintain at least 90.0% of the initial

  6. Analysis of the Design Beauty of Evian Bottled Water Packaging%探析依云瓶装水包装的设计之美

    Institute of Scientific and Technical Information of China (English)

    陈莹燕

    2012-01-01

    对依云瓶装水的包装设计历程进行了梳理,分析了依云打造品牌的包装策略。在此基础上通过对依云限量版纪念瓶设计的分析和探讨,提出了依云打造品牌包装设计的关键点:坚持品牌策略指导下的包装设计理念,以创意为桥,架设品牌与艺术、时尚之间的联系,建立专属于自己的品牌个性;坚持包装人性化设计的理念。%It summarized the packaging design process of Evian bottled water and analyzed the packaging strategy of Evian brand. Based on these, it gave analysis and discussion about the limited edition commemorative bottles of Evian design, proposed the key points of Evian brand packaging design: one is to adhere to the brand strategy under the guidance of packaging design, make originality as the bridge, set up link between brand, art and fashion, establish own brand personality; two is to insist on the concept of human design packaging.

  7. IT auditing

    NARCIS (Netherlands)

    Fijneman, R.; Ho, K.H.; Roos Lindgreen, E.; Veltman, P.

    2008-01-01

    This textbook on IT auditing (EDP auditing) is intended for ICT, IT auditing and accountancy professionals and students. It provides a consistent introduction to all topics with which an IT auditor is confronted in practice. It also refers of course to the major standards and norms adopted in

  8. Determination of Cd,Cu,Pb,Fe,Zn in Bottled Drinking Water through Atomic Absorption Spectrometry Method%原子吸收光谱法对瓶装饮用水中Cd、Cu、Pb、Fe、Zn的分析

    Institute of Scientific and Technical Information of China (English)

    李帅; 沈祥森; 李勇

    2011-01-01

    10 different brands of commercial bottled drinking water for the experimental materials,using graphite furnace atomic absorption and flame atomic absorption spectrometry,the bottled water Cd、Cu、Pb、Fe、Zn five heavy metals were determined to understand the different brand bottled drinking water content of the five heavy metals.The results showed that:The whole bottled water content of the five heavy metals Cd、Cu、Pb、Fe、Zn are up to national standard requirements.%以10种不同品牌的市售瓶装饮用水为研究对象,运用石墨炉原子吸收法和火焰原子吸收法对其Cd、Cu、Pb、Fe、Zn5种重金属元素的含量进行分析,以了解不同品牌的瓶装饮用水中重金属元素的含量情况。研究结果表明:10种市售瓶装饮用水中的Cd、Cu、Pb、Fe、Zn 5种重金属含量均达到国标要求。

  9. Electrochemical determination of bisphenol A in plastic bottled drinking water and canned beverages using a molecularly imprinted chitosan-graphene composite film modified electrode.

    Science.gov (United States)

    Deng, Peihong; Xu, Zhifeng; Kuang, Yunfei

    2014-08-15

    Herein, a novel electrochemical sensor based on an acetylene black paste electrode modified with molecularly imprinted chitosan-graphene composite film for sensitive and selective detection of bisphenol A (BPA) has been developed. Several important parameters controlling the performance of the sensor were investigated and optimised. The imprinted sensor offers a fast response and sensitive BPA quantification. Under the optimal conditions, a linear range from 8.0 nM to 1.0 μM and 1.0 to 20 μM for the detection of BPA was observed with the detection limit of 6.0 nM (S/N=3). Meanwhile, the fabricated sensor showed excellent specific recognition to template molecule among the structural similarities and coexistence substances. Furthermore, this imprinted electrochemical sensor was successfully employed to detect BPA in plastic bottled drinking water and canned beverages.

  10. Determination of Haloacetic Acids in Bottled and Tap Water Sources by Dispersive Liquid-Liquid Microextraction and GC-MS Analysis

    Directory of Open Access Journals (Sweden)

    Mohsen A. Al-shatri

    2014-01-01

    Full Text Available Haloacetic acids are toxic organic pollutants that can be formed as by-products of disinfection of water by chlorination. In this study, we developed a fast and efficient method for the determination of six species of these compounds in water using dispersive liquid-liquid microextraction followed by GC-MS analysis. To be suitable for GC analysis, the acidic analytes were derivatized using n-octanol. One-factor-at-a-time optimization was carried out on several factors including temperature, extraction time, amount of catalyst, and dispersive solvent. The optimized conditions were then used to determine calibration parameters. Linearity, as demonstrated by coefficient of determination, ranged between 0.9900 and 0.9966 for the concentration range of 0.05–0.57 µg/L. The proposed method has good repeatability; intraday precision was calculated as %RSD of 2.38–9.34%, while interday precision was 4.69–8.06%. The method was applied to real samples in bottled water and tap water sources. Results indicated that the total concentrations of the analytes in these sources (2.97–5.30 µg/L were far below the maximum contaminant levels set by both the World Health Organization and the United States Environmental Protection Agency. The proposed method compared favorably with methods reported in the literature.

  11. STATUTORY AUDIT AND PERFORMANCE AUDIT

    Directory of Open Access Journals (Sweden)

    Suciu Gheorghe

    2012-06-01

    Full Text Available The financial audit has two components: the statutory audit (mandatory for certain companies made by financial auditors and the optional audit which can be done by other professionals (chartered accountants, evaluators, and tax matters members. The statutory audit represents the examination done by an authorized and independent professional of the financial statement of a company, in order to express a motivated opinion regarding the position, situation and financial performance. The statutory audit is established by law for those companies which have a significant public impact. The financial statement represents the management’s statement through which the firm communicates with the stakeholders: shareholders, creditors, investors, clients, debtors, contractors, employees, state institutions and thepopulation. The objective of the performance audit is the efficiency and effectiveness with which the audited company uses its resources in order to accomplish its responsibilities. The audit committees have a greater responsibility especially after the scandals in the US (Enron, WorldCom, Adelphia, through the Sarbanes-Oxley act from 2002. The audit committee has the following attributions: it monitors the financial reports made by the executive management, helps internal investigations, monitors and evaluates the activity of the internal audit department, gives recommendations to the administration council regarding the problems encountered when communicating with the shareholders, replacing or extending the mandate of the external auditor and authorizes the approval of this person’s fees.

  12. New alternatives in construction: earth filled pet bottles

    OpenAIRE

    Ruiz Valencia, Daniel; Pontificia Universidad Javeriana; López Pérez, Cecilia;; Cortes, Eliana; Pontificia Universidad Javeriana; Froese, Andreas; Pontificia Universidad Javeriana

    2014-01-01

    ABSTRACTTwo of the main problems of mankind are the lack of housing and the accumulation of solid waste and garbage thatultimately brings environmental problems. Within this solid waste are plastics such as the PET bottles (for examplesoda bottles). In order to try to solve both problems, since 2001 Eco-Tec Soluciones has pioneered in the constructionof houses and water storage structures with PET bottles filled with rammed earth. Groups GRIME and Estructuras yConstrucción of the Pontificia U...

  13. Study on Volatile Organic Compounds in Some Bottled Water for Drinking Produced in China%我国部分商品瓶装饮用水中挥发性有机物的研究

    Institute of Scientific and Technical Information of China (English)

    肖贤明; 王新明; 刘祖发; 傅家谟

    2001-01-01

    By using a system combining Tekmar 3000 purge and trapconcentrator with HP 5972 GC/MSD,with reference to the US EPA standard test methods,a quantitative analysis on volatile organic compounds (VOCs) in some bottled waters for drinking produced in China was made.The results showed that all of these bottled waters contain a minor amount of VOCs,mostly in the range of 1.0~8.0 μg/L,including halogenated hydrocarbons and BTEX which are carcinogenic and mutagenic chemicals.It was noted that the VOCs in these bottled waters are obviously higher than that in two types of well-known bottled water from France although they are much lower than Chinese national standard of bottled water for drinking.The VOCs in the bottled waters are mainly related to the techniques and their combination to be used to purify the waters,and can be removed by improving these techniques.%应用Tekmar3000吹扫捕集-气相色谱质谱组合分析仪,参照USEPA的标准分析方法,对我国某些商品瓶装饮用水中挥发性有机物进行了定量分析,结果表明,其含量一般在1~8μg/L,其中普遍含有具三致潜力的卤代烃与苯系物。虽然这些毒理性指标均可达到我国瓶装饮用纯净水卫生标准,但与国外优质瓶装饮用水相比,存在明显的差距。瓶装饮用水中挥发性有机物主要与深度处理技术和组合工艺有关,可通过改进这些技术而得以有效控制。

  14. Performance Auditing Structure of Government

    OpenAIRE

    鈴木, 豊; スズキ, ユタカ; Suzuki, Yutaka

    2001-01-01

    Government audit is called public audit. The objective of government audit is for discharge of public accountability. Scopes of government audit are financial audit and performance audit too from differ business audit. The performance statement by government has to prepare for performance audit. External auditors audit the performance audit. Scope of performance audit is 3Es (Economy, Efficiency, Effectiveness).

  15. Isolamento de amebas de vida livre a partir de água mineral engarrafada Isolation of free-living amoebae from bottled mineral water

    Directory of Open Access Journals (Sweden)

    Homero Coutinho Salazar

    1982-10-01

    Full Text Available Foram isoladas amebas dos gêneros Vahlkampfia, Glaeseria, Acanthamoeba, Filamoeba, Amoeba, Platyamoeba e Hartmanella de dez diferentes marcas de água mineral engarrafadas, servidas no Rio de Janeiro, RJ (Brasil. Somente uma das marcas foi negativa para protozoários, enquanto que de todas as outras foram isoladas amebas de vida livre. O significado desses resultados é discutido como um indicador de qualidade da água mineral usada comercialmente, destacando-se o fato de que alguns desses microorganismos são potencialmente patogênicos.Amoebae of the genera Vahlkampfia, Glaeseria, Acanthamoeba, Filamoeba, Amoeba, Platyamoeba and Hartmanella were isolated from ten different brands of bottled mineral water used in Rio de Janeiro. Of these brands, only one was negative after an incubation period of twenty days, while the others were all positive for free living amoebae. The results are discussed as an indicator of the quality of commercially used mineral water and it is stressed that some of these microorganisms are potentially pathogenic.

  16. Separation and determination of copper in bottled water samples by combination of dispersive liquid--liquid microextraction and microsample introduction flame atomic absorption spectrometry.

    Science.gov (United States)

    Citak, Demirhan; Tuzen, Mustafa

    2013-01-01

    A new and simple method for the determination of trace amounts of Cu(II) was developed by combination of dispersive liquid-liquid microextraction (DLLME) preconcentration and microsample introduction flame atomic absorption spectrometry. In this method, ethanol and chloroform were chosen as disperser and extraction solvents, respectively, and 1-nitroso-2-naphthol was used as the complexing agent. The factors affecting the extraction efficiency and determination of Cu(II), including extraction and disperser solvent nature and volume, concentration of the complexing agent, pH of the solution, extraction time, and matrix ions, were investigated. Under optimal conditions, the LOD for Cu(II) was 0.95 microg/L with a preconcentration factor of 70. The RSD was 1.9%. The accuracy of the developed DLLME method was verified by determination of Cu(II) in a certified reference material (NRCC-SLRS-4 river water). The relative error was -3.31%. The developed preconcentration procedure was successfully applied to the analysis of bottled drinking water samples.

  17. Performance of funnel-shaped plastic bottle for water saving cultivation in extreme arid region%极端干旱区漏斗状塑料瓶的节水栽培性能

    Institute of Scientific and Technical Information of China (English)

    曹林涛; 高斌; 王前道; 曹亦斌

    2012-01-01

    为解决缺水高渗透地区新栽植物难以存活问题,该文通过室内实验与现场试验研究了塑料瓶的节水栽培性能.室内模拟不同的水分散失条件,连续多U定时测试塑料瓶内砂土的含水量,回归分析剩余含水量随时问的变化函数.结果表明:温度越高,水分散失速度越大;由饱和含水量至萎蔫含水量,在室温(22±1)℃下可以间隔9d浇水1次;漏斗状比直筒状瓶有利于延迟水分渗透;砂粒与有机肥比黏粒有利于锁住水分,可用以调节水分散失速度.现场栽植试验(有瓶与无瓶)比较亦证实该方法的有效性.由于漏斗状塑料瓶具有留存水流与延迟渗透的节水功效,有利于缺水或高渗透地区草、灌木植物的栽培.%In order to resolve the plants survival difficulty in high permeability or water-shortage area, the water-saving cultivation by funnel-shaped plastic bottle was studied through laboratory and field tests. Different water losing conditions were simulated in the laboratory to continuously test water content of sandy soil in the plastic bottle every day. Then, the regressive function was built to describe the relationship between remaining water content in sandy soil and time. Testing Results showed that the higher the environment temperature was, the greater the rate of water loss. From the saturated water content to the wilting water content, an interval of watering could be 9 days at room temperature((22±l)°C).The funnel-shaped bottles could delay water loss compared to straight cylinder-shaped bottles. Sand particles combined with organic fertilizers were more facilitated to conserve water than clay soil, and they could be used to adjust the rate of water loss. Field planting tests (with bottles and without bottles) confirmed its water-saving effectiveness. Due to high efficiency of water accumulation and saving, funnel-shaped bottles can benefit plants cultivation in high permeability or water-shortage area.

  18. Uses of Water Public Supply Network for Bottling; Utilizacion del agua de la red de abastecimiento publico para embotellarla

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Miranda, J. P.

    2009-07-01

    Many authors have referenced that just a small percentage (by 2.5%) of the total water in the world is fresh water, and it is concentrated in a few number of countries or regions. Consequently the problem of demand and consumption of water (so in developed as in developing countries) represent and essential subject, especially in highly populated cities. (Author) 8 refs.

  19. SURVEY OF BOTTLED WATERS FOR PERCHLORATE BY ELECTROSPRAY IONIZATION MASS SPECTROMETRY (ESI-MS) AND ION CHROMATOGRAPHY (IC)

    Science.gov (United States)

    Perchlorate has been identified in ground and surface waters around the US, including some that serve as supplies for drinking water. Because perchlorate salts are used as solid oxidants in rockets and ordnance, water contamination may occur near military or aerospace installatio...

  20. Temperature profile and other data collected using bottle and CTD casts from the ARGO and other platforms from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 16 March 1964 to 20 December 1964 (NODC Accession 7600333)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from ARGO and other platforms in the Coastal Waters of California...

  1. Temperature profile and other data collected using bottle and CTD casts from the MELVILLE in the Coastal Waters of California for the International Decade of Ocean Exploration / Geochemical Ocean Section Study (IDOE/GEOSECS) project from 19 May 1979 to 23 May 1979 (NODC Accession 8800233)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from MELVILLE from the Coastal Waters of California from May 19,...

  2. Water physical and chemical data from current meter and bottle casts from the H.J.W. FAY and other platforms as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 16 May 1977 - 15 September 1977 (NODC Accession 7800386)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the H.J.W. FAY and other platforms from May 16, 1977 to September 15, 1977....

  3. Water physical, chemical, and benthic organisms data from current meter and bottle casts from the H.J.W. FAY and CAPE HENLOPEN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 03 November 1976 - 15 September 1977 (NODC Accession 7800319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical, chemical, and benthic organisms data were collected using current meter and bottle casts from the H.J.W.FAY and CAPE HENLOPEN from November 3, 1976...

  4. Physical, chemical, and other data from bottle casts from the Coastal Waters of Washington/Oregon from the THOMAS G. THOMPSON as part of the International Decade of Ocean Exploration / Coastal Upwelling Ecosystems Analysis (IDOE/CUEA) from 11 July 1973 to 21 July 1973 (NODC Accession 7601145)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, chemical, and other data were collected from bottle casts in the Coastal Waters of Washington/Oregon from the THOMAS G. THOMPSON from 11 July 1973 to 21...

  5. Temperature profile and other data collected using bottle and CTD casts from the A. AGASSIZ and other platforms from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 06 January 1965 to 22 June 1968 (NODC Accession 7300970)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from A. AGASSIZ and other platforms in the Coastal Waters of...

  6. Temperature profile and other data collected using bottle and CTD casts from the A. AGASSIZ and NOAA Ship DAVID STARR JORDAN from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 03 January 1972 to 16 November 1972 (NODC Accession 8600369)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from A. AGASSIZ and other platforms from the Coastal Waters of...

  7. Temperature profile and other data collected using bottle and CTD casts from the ELLEN B. SCRIPPS and other platforms from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 23 January 1983 to 08 December 1983 (NODC Accession 8600371)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from ELLEN B. SCRIPPS and other platforms from the Coastal Waters...

  8. Temperature profile and other data collected using bottle and CTD casts from the ALE ANDRO DE HUMBOLDT from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 27 January 1972 to 13 December 1972 (NODC Accession 7501040)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from ALE ANDRO DE HUMBOLDT in the Coastal Waters of California from...

  9. Temperature profile and other data collected using bottle and CTD casts from the PROTEUS and other platforms from the Coastal Waters of California during the California Cooperative Fisheries Investigation (CALCOFI) project, 27 August 1969 to 22 April 1974 (NODC Accession 7500074)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from PROTEUS and other platforms in the Coastal Waters of...

  10. Triple point of water bottle freezing method based on accurate thermostatic bath%基于精密液体低温槽的水三相点瓶冻制方法

    Institute of Scientific and Technical Information of China (English)

    朱锐; 孙震疆

    2014-01-01

    This paper introduced the freezing and save method of the triple point of water bottle based on accurate thermostatic bath. The freezing process was simple and more security, easy to operate, and not easy to damage the triple point of water bottles. This method has good practical value in the actual testing work.%介绍一种使用精密液体低温槽的水三相点瓶冻制和保存方法。冻制过程简单安全,易于操作,不易损坏水三相点瓶。此种方法冻制水三相点瓶,在实际检测工作中具有较好的实用价值。

  11. Water temperature, salinity, nutrients and other variables from bottle casts by R/V MELVILLE From NE Pacific (limit-180) from 19850816 to 19850906 (NODC Accession 8700138)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data from thirty five bottle casts from the R/V MELVILLE for the ALCYONE cruise Leg 3 (cruise 275) in NODC standard C100/SD2 format.

  12. On Brand Differentiation Strategy of Bottled Water through Advertising Slogans%瓶装水品牌利用广告语进行差异化定位的策略

    Institute of Scientific and Technical Information of China (English)

    黄秋尘

    2014-01-01

    Different bottled water brands have similar physical attributes so they should be differentiated by packaging and advertising slogans etc .Advertising slogans play an important role in the brand differentiation of bottled water .Contras-ting slogans of famous bottled water brands at home and abroad , it proves that slogans are helpful in creating USP ( Unique Selling Point ) and establishing special brand relationship .Combined with appropriate advertising strategy , they can create unique brand personality .%瓶装水产品的物理属性相近,因此需要借助广告语等元素进行品牌区隔。纵观国内外著名瓶装水品牌,利用广告语可以创造出独特的卖点,构建独特的品牌关系,还可以配合广告战略创造出独特的品牌性格。

  13. Nitrate and trace elements in municipal and bottled water in Spain Nitrato y elementos traza en agua embotellada y municipal en España

    Directory of Open Access Journals (Sweden)

    Nadia Espejo-Herrera

    2013-04-01

    Full Text Available Objectives: To describe levels of nitrate and trace elements in drinking water from the study areas of a multicase-control study of cancer in Spain (MCC-Spain. Methods: A total of 227 tap water samples were randomly collected from 67 municipalities in 11 provinces and the nine most frequently consumed bottled water brands were sampled to measure levels of nitrate, arsenic, nickel, chromium, cadmium, lead, selenium and zinc. Results: The median nitrate level was 4.2mg/l (rangeObjetivos: Determinar las concentraciones de nitrato y de elementos traza en el agua de consumo de las áreas del estudio Multicaso-Control de Cáncer en España (MCC-Spain. Métodos: Se tomaron al azar 227 muestras de agua municipal en 67 municipios de 11 provincias, y 9 muestras de las aguas embotelladas más consumidas, para cuantificar la cantidad presente de nitrato, arsénico, níquel, cromo, cadmio, plomo y zinc. Resultados: La mediana de las cifras de nitrato fue 4,2mg/l (rango<1-29,0, con similares resultados en municipios urbanos y rurales (p=0,86. Los elementos traza fueron incuantificables en el 94% de las muestras de agua municipal. Se observaron diferencias entre áreas para nitrato (p<0,001 y arsénico (p=0,03. Solo el nitrato fue cuantificable en el agua embotellada (rango 2,3-15,6mg/l. Conclusiones: La cantidad de nitrato en el agua municipal difiere entre regiones y es menor que el límite regulatorio en todas las muestras. Los elementos traza son mayormente incuantificables tanto en el agua municipal como en la embotellada.

  14. Retroactive auditing

    OpenAIRE

    2011-01-01

    Retroactive auditing is a new approach for detecting past intrusions and vulnerability exploits based on security patches. It works by spawning two copies of the code that was patched, one with and one without the patch, and running both of them on the same inputs observed during the system's original execution. If the resulting outputs differ, an alarm is raised, since the input may have triggered the patched vulnerability. Unlike prior tools, retroactive auditing does not require developers...

  15. Audit Committees

    OpenAIRE

    2009-01-01

    We have produced this booklet to explain the role of audit committees as they can help to improve how an organisation is governed. In a company, an audit committee is a group of its directors whose main responsibilities are to: advise all directors about the quality of the company’s financial statements; work with the company’s external auditor; and examine the reports of the company’s internal auditor, if it employs one.

  16. 气相色谱-质谱联用法测定瓶装水中邻苯二甲酸酯的含量%Determination of phthalates esters in bottled waters by GC-MS/MS

    Institute of Scientific and Technical Information of China (English)

    邱歆磊; 冯超; 汪国权

    2013-01-01

      Objective To establish a method for determination of phthalates esters in bottled waters by gas chromatography coupled with tandem mass spectrometry (GC-MS/MS), and study the effect of the kinds of packaging materials and storage conditions on the concentration of phthalate esters in bottled water. Methods The bottled waters were cleaned up by SPE column, eluted with dichloromethane, concentrated by vaccum rota-tion evaporimeter, and analyzed by GC-MS/MS. The isotope internal standards were applied to the analysis and quantitation of phthalate esters. Results The method showed a good linearity over the range of 20∼500 ng/mL for 16 compounds of phthalate esters with R2≥0.996. The detection limit was 7.25∼11.93 ng/L. The recoveries were 74%∼106%at the spiked level of 200 ng/mL and 50 ng/mL with relative standard deviation lower than 5%. Phthalate esters were detected in 29 brands of bottled waters sold in Shanghai, and the concentration of DEHP was higher than 20 ng/L. DEHP, DIBP and DBP were detected in 25 brands of bottled waters with the packing material of PET. When stored at high temperature, the concentration of phthalate esters in bottled water raised sharply. Conclusion This method is suitable for the analysis of phthalate esters, and it provides a reference for the risk evaluation of phthalate esters in bottled water.%  目的建立市售瓶装水中邻苯二甲酸酯类化合物的 GC-MS/MS 分析方法,研究包装材料种类、保存条件对瓶装水中邻苯二甲酸酯类化合物浓度的影响。方法样品经固相萃取净化(SPE)、二氯甲烷洗脱,真空浓缩后,采用 GC-MS/MS 对16种邻苯二甲酸酯类化合物进行检测,同位素内标定量。结果16种化合物在20~500 ng/mL浓度范围内,线性关系良好,相关系数R2大于0.996。在200、50 ng/mL两个加标水平下,方法回收率为71%∼109%, RSD小于5%。方法最低检测限在7.25∼11.93 ng/L范围内,市售的29个品牌的

  17. Auditing wildlife

    OpenAIRE

    B.K. Reilly; Y. Reillly

    2003-01-01

    Reilly B.K. and Y. Reilly. 2003. Auditing wildlife. Koedoe 46(2): 97–102. Pretoria. ISSN 0075-6458. Accountants and auditors are increasingly confronted with the problem of auditing wildlife populations on game ranches as their clients' asset base expands into this industry. This paper aims to provide guidelines on these actions based on case study data and research in the field of wildlife monitoring. Parties entering into dispute on numbers of animals on a property often resort to their au...

  18. Reducing Water Vapor Permeability of Poly(lactic acid Film and Bottle through Layer-by-Layer Deposition of Green-Processed Cellulose Nanocrystals and Chitosan

    Directory of Open Access Journals (Sweden)

    Katalin Halász

    2015-01-01

    Full Text Available Layer-by-layer electrostatic self-assembly technique was applied to improve the barrier properties of poly(lactic acid (PLA films and bottles. The LbL process was carried out by the alternate adsorption of chitosan (CH (polycation and cellulose nanocrystals (CNC produced via ultrasonic treatment. Four bilayers (on each side of chitosan and cellulose nanocrystals caused 29 and 26% improvement in barrier properties in case of films and bottles, respectively. According to the results the LbL process with CH and CNC offered a transparent “green” barrier coating on PLA substrates.

  19. Investigation of overfoaming activities and gushing mechanisms of individual beer ingredients as model substances in bottled carbonated water.

    Science.gov (United States)

    Aydın, Ahmet Alper; Ilberg, Vladimir; Titze, Jean

    2014-08-01

    Researchers in several disciplines are interested in understanding the spontaneous and eruptive overfoaming (gushing) of carbonated beverages, as it is an essential problem of both the brewing and beverage industries. In order to understand the mechanism(s) taking place in gushing beer, several beer ingredients have been investigated as model substances in a much simpler matrix of carbonated water. For this purpose, sinapic acid, vanillic acid, ferulic acid, cinnamic acid and palmitic acid have been chosen as model beer ingredients. Gushing formation of the investigated beer ingredients depends on the degree of stabilized solvated molecular carbon dioxide in water. For this purpose, functional groups capable of forming hydrogen bonds with electronegative oxygen atoms of carbon dioxide are needed. However, the solubility of the substances plays an important role in the abundance of these functional groups in undissociated form to interact with molecular carbon dioxide. The reported data provide valuable insights into the gushing problem and help to understand its formation pathways. Each gushing-positive substance has an individual mechanism related to its structural conformation and solubility level. Therefore possible gushing mechanisms have been proposed with respect to the structural changes in model substances to clarify the differences in observed overfoaming and gushing stability levels. © 2013 Society of Chemical Industry.

  20. Mohos y levaduras en agua envasada y bebidas sin alcohol Moulds and yeasts in bottled water and soft drinks

    Directory of Open Access Journals (Sweden)

    E. G. Ancasi

    2006-04-01

    Full Text Available La aparición esporádica de alteraciones en algunos envases dentro de lotes de aguas carbonatadas y de bebidas con zumos frutales (carbonatadas y no carbonatadas motivó la presente investigación, en la que se determinaron los microorganismos causantes del deterioro observado. También se estudiaron los contaminantes del azúcar utilizado en la elaboración de una de las bebidas analizadas. Se emplearon los métodos de Déak y Beuchat y de Pitt y Hocking para la identificación de levaduras y de mohos, respectivamente. Las levaduras causantes del deterioro de las bebidas fueron Debaryomyces hansenii, Debaryomyces polymorphus, Galactomyces geotrichum, Metschnikowia pulcherrima, Mucor circinelloides, Pichia anomala, Pichia jadinii, Pichia subpelliculosa, Rhodotorula glutinis y Zygosaccharomyces bailii. Los mohos y las levaduras encontrados en el azúcar fueron Aspergillus niger, Aspergillus penicilloides, Aspergillus versicolor, Cladosporium sphaerospermum, Mucor racemosus, Pichia anomala y Rhizopus stolonifer. En el agua carbonatada se encontraron los mohos Paecilomyces fulvus y Penicillium glabrum.Some damaged cartons of soft drinks and carbonated water were analyzed to detect the microorganisms that caused the damage. The contaminants of sugar used in the production of one of the drinks were also studied. The methods of Déak & Beuchat and Pitt & Hocking were used for the identification of yeasts and moulds, respectively. The agents of the spoilage of soft drinks were Debaryomyces hansenii, Debaryomyces polymorphus, Galactomyces geotrichum, Metschnikowia pulcherrima, Mucor circinelloides, Pichia anomala, Pichia jadinii, Pichia subpelliculosa, Rhodotorula glutinis and Zygosaccharomyces bailii. The microorganisms found in sugar were Aspergillus niger, Aspergillus penicilloides, Aspergillus versicolor, Cladosporium sphaerospermum, Mucor racemosus, P. anomala and Rhizopus stolonifer. Paecilomyces fulvus and Penicillium glabrum were observed in

  1. Determinants of using pacifier and bottle feeding.

    Science.gov (United States)

    Buccini, Gabriela dos Santos; Benício, Maria Helena D'Aquino; Venancio, Sonia Isoyama

    2014-08-01

    To analyze the factors associated with the use of pacifiers and/or bottle feeding in infants aged under one year. This is a cross-sectional study with 34,366 children and using data from the database of the 2nd Nationwide Survey of Breastfeeding Prevalence performed in the Brazilian capitals and Federal District in 2008. Cluster sampling was used. The questionnaire included questions about the use of artificial nipples in the last 24 hours. The analysis considered three outcomes: exclusive use of pacifier, exclusive use of bottle feeding, and use of artificial nipples (pacifier and bottle feeding). Prevalence ratios were obtained using Poisson regression with robust variance following a hierarchical model. The following factors were associated with exclusive use of the pacifier: mother working outside the home, primiparity, child was not breastfed within the first hour, and child had consumed tea on the first day at home. The following factors were associated with exclusive use of bottle feeding: mother working outside the home, primiparity, low birth weight, child not breastfed within the first hour, and child had consumed milk formula and tea on the first day at home. The following factors were associated with use of artificial nipples (pacifier and bottle feeding): mother working outside the home, primiparity, cesarean delivery, the male gender, low birth weight, born in a hospital not accredited as "baby friendly", required health baby monitoring in the Primary Health Care Unit (PR = 0.91), and child had consumed milk formula, water, or tea on the first day at home. This study identified profiles of exclusive users of pacifiers, bottle feeding, and both. The provided information can guide preventive practices for child health.

  2. Determinants of using pacifier and bottle feeding

    Directory of Open Access Journals (Sweden)

    Gabriela dos Santos Buccini

    2014-08-01

    Full Text Available OBJECTIVE To analyze the factors associated with the use of pacifiers and/or bottle feeding in infants aged under one year. METHODS This is a cross-sectional study with 34,366 children and using data from the database of the 2nd Nationwide Survey of Breastfeeding Prevalence performed in the Brazilian capitals and Federal District in 2008. Cluster sampling was used. The questionnaire included questions about the use of artificial nipples in the last 24 hours. The analysis considered three outcomes: exclusive use of pacifier, exclusive use of bottle feeding, and use of artificial nipples (pacifier and bottle feeding. Prevalence ratios were obtained using Poisson regression with robust variance following a hierarchical model. RESULTS The following factors were associated with exclusive use of the pacifier: mother working outside the home, primiparity, child was not breastfed within the first hour, and child had consumed tea on the first day at home. The following factors were associated with exclusive use of bottle feeding: mother working outside the home, primiparity, low birth weight, child not breastfed within the first hour, and child had consumed milk formula and tea on the first day at home. The following factors were associated with use of artificial nipples (pacifier and bottle feeding: mother working outside the home, primiparity, cesarean delivery, the male gender, low birth weight, born in a hospital not accredited as “baby friendly”, required health baby monitoring in the Primary Health Care Unit (PR = 0.91, and child had consumed milk formula, water, or tea on the first day at home. CONCLUSIONS This study identified profiles of exclusive users of pacifiers, bottle feeding, and both. The provided information can guide preventive practices for child health.

  3. Audit of a bank

    OpenAIRE

    Ambros, Lukáš

    2012-01-01

    The goal of my thesis "Audit of a bank" is to identify and describe the area of external and internal audit in banking and to focus on specifics of bank audit in comparison to external audit of commercial enterprise. The first part is focused on audit of financial statements. In the second part are described the specifics of banking segment. Third part describes internal audit and cooperation between external and internal audit. In the last part there are described methods applied during the ...

  4. Research on audit culture

    Institute of Scientific and Technical Information of China (English)

    王仪

    2016-01-01

    It is the basis of promoting the scientific development of the audit business to strengthen the cultural construction of the audit staff, and also can improve the comprehensive quality of the audit staff. Aiming at the shortcomings of the current audit culture, this paper analyzes the reasons, and then puts forward some countermeasures for the construction of the audit culture, which is the goal of accelerating the construction of the audit culture and enhancing the strength of the audit team.

  5. Audit of a bank

    OpenAIRE

    Ambros, Lukáš

    2012-01-01

    The goal of my thesis "Audit of a bank" is to identify and describe the area of external and internal audit in banking and to focus on specifics of bank audit in comparison to external audit of commercial enterprise. The first part is focused on audit of financial statements. In the second part are described the specifics of banking segment. Third part describes internal audit and cooperation between external and internal audit. In the last part there are described methods applied during the ...

  6. 浙江省一起由桶装水所致的诺如病毒胃肠炎暴发调查%A norovirus-borne outbreak caused by contaminated bottled spring water in a school, Zhejiang province

    Institute of Scientific and Technical Information of China (English)

    沈纪川; 朱保平; 林君芬; 高洁; 姚文婷; 闻栋; 刘光涛; 韩建康; 马会来; 张丽杰

    2011-01-01

    目的 调查浙江省某学校出现多名急性胃肠炎病例的感染来源、传播途径和危险因素.方法 可疑病例定义:2010年4月19-30日,该校学生和教职员工中出现腹泻(≥3次/天)或呕吐者.确诊病例为可疑病例中用RT-PCR方法检出诺如病毒阳性者.开展病例对照研究,以流行高峰期21-23日的220例病例作为病例组,按年级1∶1比例频数匹配,随机抽取同年级无症状的学生作为对照组,比较两组饮用桶装水类型、饮水习惯和饮用量、卫生习惯的差异.结果 该校学生罹患率为20.3%(312/1536),教职员工无病例.98.6%的病例(n=217)和85.5%的对照(n=188)曾饮用过教室桶装水(ORM-H=12.3,95%CI:3.7~40.9);其中47.9%的病例(n=104)和41.5%的对照(n=78)饮用过教室桶装水的冷水(ORM-H=3.8,95%CI:1.5~9.6);47.9%的病例(n=104)和48.4%的对照(n=91)饮用过教室桶装水的冷热混合水(ORM-H=2.8,95%CI:1.1~7.0).未开封的教室桶装水菌落总数和大肠菌群严重超标.3例病例的粪便及1份未开封的教室桶装水标本检出诺如病毒Ⅱ型核酸阳性.桶装水生产厂家属无证非法生产.结论 本次暴发疫情由诺如病毒污染的教室桶装山泉水引起.建议学校停用桶装水、提供开水及非法生产厂家停止生产.%Objective To study a local hospital reported acute gastroenteritis in a boarding school on its source of infection, mode of transmission and risk factors of the infection. Methods A suspected case was defined as who had developed diarrhea (≥3 times/day) or vomiting among teachers or students of the school, during April 19-30, 2010. A confirmed case was from a probable case plus tested positive for norovirus in stool specimens by using RT-PCR. Stool specimens of cases and environmental specimens were collected for laboratory diagnosis. In a ease-control study, we compared exposures to sources of bottled water, consumption of bottled water, and hygienic habits of 220 probable or

  7. Revisiting the fog bottle experiment

    Science.gov (United States)

    Kamcharean, C.; Khanchong, C.; Wattanakasiwich, P.

    2016-11-01

    In this article we propose an irreversible adiabatic expansion model, modified from previous work, to explain the fog bottle experiment. Our model divides the phenomenon into five thermodynamic states, and we include in our calculation irreversible work pushing a stopper out of the bottle and heat gain from the condensation of saturated vapour. In the experiment, thermodynamic variables including pressure and temperature as functions of time were measured. The work done in pushing the stopper out was measured and the condensation heat was determined using the Clausius-Clapeyron equation to determine saturated vapour pressure. As a result, fog formation was explained through a phase diagram of water showing the saturated vapour pressure during irreversible adiabatic expansion. Also, state variables (P, V and T) and the entropy change of the real process were compared with the reversible and irreversible adiabatic expansion and our modified process. Using a P-T diagram, we show that the amount of reversible work is always higher than the amount of irreversible work, due to dissipative work. According to our modified model, the dissipative work and the heat transferred from condensation cause irreversibility or {{Δ }}{S}{{t}{{o}}{{t}}{{a}}{{l}}}\\gt 0.

  8. Study on the replacing time of water-sealed bottle of thoracic cavity drainage patients.%胸腔闭式引流一次性水封瓶更换时间的探讨

    Institute of Scientific and Technical Information of China (English)

    朱晓艳; 张清媛; 邓艳芳

    2011-01-01

    目的:研究胸腔闭式引流一次性水封瓶更换时间与胸腔感染的相关性,探讨一次性水封瓶的最佳更换时间.方法:对240例行胸腔闭式引流且排除胸腔感染病人,使用随机数字表分为A、B、C、D 4组,每组60例,A组每天更换水封瓶1次,B组每3 d更换1次,C组每周更换1次,D组为使用超过1周至拔管.追踪监测一次性水封瓶内生理盐水和胸腔引流液,有细菌生长则对该病例停止实验,同时对此240例病人的胸腔积液或胸腔引流管前端2 cm进行细菌培养,最后进行统计学分析.结果:一次性水封瓶生理盐水的细菌培养均为阴性,4组水封瓶中胸腔引流液的细菌培养结果阳性16例,共检出细菌6种,各组培养阳性率比较,差异无统计学意义(P>0.05);对此240例病人的胸腔积液和胸腔引流管前端2 cm进行细菌培养,234例无细菌生长,6例细菌培养阳性.结论:在严格无菌操作下,对于胸腔引流管留置时间较长的病人,每周更换1次水封瓶并不会增加胸腔内感染及水封瓶内细菌定植的机会.%Objective : To investigate the relation between the replacing time of water - sealed bottle and the thoracic cavity infections , and determine the optional time for replacement . Methods : 240 patients with closed drainage of pleural cavity and without thoracic infections were randomly divided into 4groups. Group A : replacement of water - sealed bottle every day ; group B : replacement of bottle every 3 days ; group C : replacement of bottle every week ; group D : keeping water - sealed bottle over a week until the removal of chest tube. The normal saline and drainage fluid in the water - sealed bottle was cultured separately. When bacterium was found in the drainage fluid , the thoracic transudate and the fluid at the end of the tube was cultured simultaneously. Results Bacterium was not found in normal saline in the one - off water - sealed hottle. 6 species of hacteria were found from 16

  9. Determination of biodegradation rates of water-soluble polymers by three-group-bottles method%3组瓶法测定水溶性高聚物的生物降解率

    Institute of Scientific and Technical Information of China (English)

    吴新世; 刘连遵; 孙波; 王菁; 师慈

    2009-01-01

    A three-group-bottles method namely culturing bottle, toxic bottle, and neutral bottle for determining the biode gradability of water-soluble polyaspartie acid-chitosan copolyrner was established and studied from the pretreatment of the remained sample, ehoiee of the analyzing method, and analysis of the testing data, etc. Compared with the routine testing method, the basic determination approach had two advantages at least: on the one hand, it bad more logic by working out the neutral bottle in the test design, and on the other, after the eopolymer was treated by the active sludge for 28 days sim-ultaneously, the maximum degradation rate arrived to 55. 47% by the determination approach, while that was only 47.51% by the latter, which was lower 7.96% than the former.%以水溶性聚天冬氨酸壳聚糖共聚物为研究对象,初步建立了一套以聚合物降解3组瓶即样品瓶、毒性瓶和中性瓶培养为核心内容,包括样品预处理、检测方法选择、结果分析处理等的水溶性高聚物生物降解率测定的基本方法.与常规分析方法相比,一方面本实验方案因增加了中性瓶设计而使得其逻辑性更加严密;另一方面,将聚天冬氨酸壳聚糖共聚物用活性污泥滤液处理28 d,由本实验方案得到的生物降解率为55.47%,而常规方法仅为47.51%,前者比后者约高出7.96%.

  10. AUDIT BISNIS

    Directory of Open Access Journals (Sweden)

    Yulius Jogi Cristiawan

    1999-01-01

    Full Text Available The purpose of financial audit is to give opinion that the financial statement present fairly, in all material respect, the financial position, the result of operation and cash flow in conformity with generally accepted accounting principles. In this case, the focus of financial audit is financial statement. A Independent Auditor do not consider that the financial statement is the reflections of company business transaction that result from accounting process. In the accounting process, the distorsion information could be happened in business transaction. For examples the finished good must be presented at historical cost at financial statement, but if, the competitor could sell with the lower price or there are any substitutes, its presentation must be adjusted. A financial statement could not present the information about the competitors. Hence the auditor must be understand all aspects of client business. A conceptual framework for understanding client business will be presented in this article. Abstract in Bahasa Indonesia : Audit atas Laporan Keuangan (Financial Audit bertujuan untuk memberikan pendapat apakah laporan keuangan suatu entitas menyajikan sejara wajar atau tidak posisi keuangan, hasil operasi dan arus kas sesuai dengan prinsip akuntansi yang berlaku umum. Disini jelas terlihat bahwa fokus audit adalah laporan keuangan. Auditor lupa bahwa laporan keuangan merupakan suatu laporan transaksi bisnis perusahaan yang telah mengalami proses akuntansi (dengan suatu asumsi-asumsi tertentu sehingga menjadi laporan keuangan. Selama proses akuntansi tersebut suatu transaksi bisnis kadang mengalami distorsi informasi. Contoh: suatu persediaan barang jadi yang secara fisik masih baik akan dilaporkan di dalam laporan keuangan sebesar cost-nya, tetapi kalau secara bisnis bisa dibuktikan bahwa atas barang tersebut pesaing bisa menjual barang dengan harga lebih murah atau telah ada barang pengganti maka atas barang tersebut harus disesuaikan

  11. Occurrence and Multiple Antibiotic Resistance Profiles of Non-fermentative Gram-Negative Microflora in Five Brands of Non-carbonated French Bottled Spring Water.

    Science.gov (United States)

    Mary; Defives; Hornez

    2000-05-01

    Five brands of French bottled mineral water were analyzed by heterotrophic plate counts (HPC) and for the presence of multiple antibiotic resistant bacteria. HPC at 22 degrees C were around 10(4) colony forming units ml(-1) on R2A medium. Enumeration on PCA/10, MH, and especially PCA and King B media was less efficient. At 37 degrees C, HPC were two to three orders of magnitude less than at 22 degrees C. Moreover, phenotypic diversity (7 to 15 phenotypes) was optimal on R2A incubated at 22 degrees C. All isolates were identified as non-fermentative Gram-negative rods and 75% were non-identifiable with the API 20NE system. Stenotrophomonas maltophilia and fluorescent Pseudomonas were isolated on VIA and CFC selective agar media, respectively. Burkholderia cepacia strains were not isolated on BCSA medium. The species S. maltophilia was found in 33%, 28%, and 11% of sample from springs A, D, and E, respectively. Independent of brand, isolates from HPC media were less efficient to achieve confluent growth in 18 h on MH at 30 or 37 degrees C (0 to 40%) than isolates from selective media (28 to 63%). Seventy percent of the total isolates from dominant microflora (1-5 x 10(3) CFU ml(-1) on HPC media) were resistant against two or four antibiotics. The antibiotics concerned were principally aztreonam, ampicillin, and nalidixic acid. The remaining dominant bacteria showed a 6-9 multiple antibiotic resistant (MAR) pattern. All isolates were susceptible to newer antimicrobial agents. Owing to their low nutrient and temperature requirements, these isolates are unlikely to cause concern to public heath. Fifty percent of strains isolated from selective media (non-dominant microflora, 4-40 CFU l(-1)) showed a 10-18 MAR pattern and 33%, identified as S. maltophilia, a 20-27 MAR pattern. However, minocycline was effective against all isolates. Owing to its low concentration, colonization of human intestine by MAR S. maltophilia is unlikely.

  12. 测试瓶法用于景观水细菌总数检测%Determination of Total Bacterial Count in Landscape Water by Test-bottle Method

    Institute of Scientific and Technical Information of China (English)

    杜鹃; 陆柱

    2011-01-01

    探讨了采用测试瓶法检测景观水中细菌总数的可行性和操作方法,细菌培养条件为37 c℃下恒温l~2d.平皿计数法和测试瓶法对照试验的数据显示,二者相对误差在10%左右,在景观水的细菌总数测定中可以用测试瓶法代替或者部分代替平皿计数法.测试瓶法可在水体现场进行操作,无需采样保存,检测及时,且能够缩短检测时间、简化操作条件和步骤,节省资源和人工工作量.%The feasibility and operational approach of test-bottle method in determination of total bacterial count in landscape water are discussed. The bacteria are cultured for 1 to 2 d at 37 ℃. The comparison test results of plate count method and test-bottle method show that the relative error between the two methods is about 10%. So the test-bottle method can either replace plate count method or a part of it in determination of total bacterial count in landscape water. This method can be used on site without sample preservation, and it has characteristics of timely determination, short time, simple operational conditions, saving resources and workload.

  13. 淄博市淄川区2008-2010年各类桶装饮用水的卫生状况%Sanitary Status of Various Types of Bottled Drinking Water in Zichuan District of Zibo City during 2008-2010

    Institute of Scientific and Technical Information of China (English)

    高瑞云

    2011-01-01

    目的 对淄博市淄川区2008-2010年各类桶装饮用水进行采样检测,了解各类桶装饮用水卫生状况,分析存在的问题,提高各类桶装饮用水卫生质量.方法 按照GB 8537-2008、GB 17324-2003、GB 19298-2003,进行采样检测和评价.结果 矿泉水合格率为91.4%,纯净水合格率为88.5%,桶装饮用水合格率为69.7%.结论 淄川区各类桶装饮用水合格率均有待提高,应加强食品安全法执法力度,规范各类桶装饮用水的生产经营,使各类桶装饮用水符合卫生要求.%[ Objective] To sample and test various types of bottled drinking water in Zichuan district of Zibo city during 2008 -2010, learn the sanitary status of bottled drinking water, analyze the problems, so as to improve the sanitary quality of bottled drinking water. [ Methods] The sampling, test and evaluation were conducted according to the Hygienic standard for drinking natural mineral water ( GB 8537 - 2008 ), Hygienic standard for bottled pure drinking water ( GB 17324-2003 ) and the Hygienic standard of bottled water for drinking (GB 19298-2003 ). [Results] The qualified rate of mineral water, pure water and bottled drinking water was 91.4%, 88.5% and 69.7%, respectively. [Conclusion]The qualified rate of various types of bottled drinking water in Zichuan district needs to be improved. It is important to strengthen the enforcement of food safety law, regulate the production and management of various types of bottled drinking water, so as to meet the health requirements.

  14. Alternative Auditing Approaches

    Energy Technology Data Exchange (ETDEWEB)

    Kandt, Alicen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-15

    This presentation for the 2017 Energy Exchange in Tampa, Florida, offers information about advanced auditing technologies and techniques including alternative auditing approaches and considerations and caveats.

  15. Comparison of Gavage, Water Bottle, and a High-Moisture Diet Bolus as Dosing Methods for Quantitative D-xylose Administration to B6D2F1 (Mus musculus) Mice

    Science.gov (United States)

    Zimmer, J. Paul; Lewis, Sherry M.; Moyer, Jerry L.

    1993-01-01

    Gavage, water bottle, and diet incorporation are 3 dosing methods used orally to administer test compounds to rodents. These 3 methods were compared in mice to determine which represented the most quantitative delivery system. For dietary incorporation, a high-moisture bolus form of NIH-31 rodent meal was developed using hydroxypropyl methylcellulose as an autoclave-stable binding agent. A high-moisture bolus were selected to increase the acceptability of the dosed diet and to promote quantitative consumption through reduced wastage. The test compound used was D-xylose, a pentose sugar that may be quantitatively detected, colorimetrically, in urine following oral dosing. Six male and 6 female B6D2FI mice were placed in metabolism cages and dosed with a known quantity of D-xylose by each of the 3 methods. Urine was collected before and after each method of administration and analysed for total D-xylose; the per cent recovery was based upon the amount of D-xylose consumed. Quantitative consumption was apparently greatest for water bottle dosing with an average recovery of 56.0% of the original D-xylose dose. High-moisture bolus incorporation ranked second with 50.0% D-xylose recovery, and gavage was third with 41.0% D-xylose recovery.

  16. Factors of Affecting Health Quality of Bottled Drinking Water and Control Measures%影响瓶装纯净水卫生质量的因素与控制措施

    Institute of Scientific and Technical Information of China (English)

    李锦利

    2012-01-01

    为提高瓶装饮用纯净水的卫生质量,对影响瓶装饮用纯净水卫生质量的因素和控制措施进行分析,指出加强企业的自身管理,强化食品卫生质量意识,制定完善的卫生管理制度,改进生产工艺、科学规范建厂等是保障其卫生质量最关键的环节.%In order to improve the health quality of bottled drinking water, this paper analyzed factors of affecting its health quality and control measures, pointed out to strengthen the management of the enterprise itself, strengthen the quality of food hygiene awareness, develop a comprehensive health management system, improve production technology, scientifically standardize the building of factory is protect the most critical link of guaranteeing health quality of bottled drinking water.

  17. Migration of 2-butoxyethyl acetate from polycarbonate infant feeding bottles

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Lund, K.H.

    2003-01-01

    An enforcement campaign was carried out to assess the migration of 2-butoxyethyl acetate (2-BEA) from polycarbonate infant feeding bottles intended for repeated use. Migration was measured by three successive migration tests into two of the European Union official food simulants: distilled water...... and 3% acetic acid testing at 40degrees C for 10 days. The Danish Veterinary and Food Administration (DVFA) has assessed that a migration above 0.33 mg for 2-BEA and a group of eight related substances kg(-1) foodstuff from plastics articles used exclusively for infants is unacceptable. Migration of 2......-BEA was found from eight of 12 bottles. However, migration above the target value of 0.33 mg kg(-1) was not observed in the third decisive test from any of the 12 different brands of polycarbonate feeding bottles. A migration of between 0.05 and 0.26 mg kg(-1) from seven of 12 bottles was measured...

  18. Application of Count Sampling Inspection in Barrels Acceptance of Bottled Drinking Water Production Enterprise%计数抽样检验在桶装饮用水生产企业桶的验收中的应用探讨

    Institute of Scientific and Technical Information of China (English)

    马闯; 莫树平; 蔡淑珍

    2014-01-01

    The theory and method of count simple plan in the process of quality acceptance of ingredient bottles of bottled water have been introduced in the article. Presenting some examples for specification, the article is supplied to manufacturers in the practice of bottled water production.%本文以GB/T 2828.1—2003为依据,系统地介绍了桶装水原料桶质量验收中的计数抽样方案的理论方法,详细地介绍了抽样方案检索实施步骤,并结合实例进行了说明,可供桶装水生产企业在实践中使用。

  19. Rapid Drinking Devices Constructed from I.V. Bags and Plastic Squeeze Bottles,

    Science.gov (United States)

    1985-04-01

    i D-153 652 RAPID DRINKING DEVICES CONSTRUCTED FROM IY BAS AND 1/1 I PLASTIC SQUEEZE BOTTLES (U) A MY RESEARCH INST OF I ENVIRONMENTAL MEDICINE...TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVEREDLf Rapid Drinking Devices Constructed Fram I.V. ( Bags and Plastic Squeeze Bottles 6...running. The primary problem with using a plastic water bottle during a race is that it ~ must be held upright and squeezed tightly while the runner

  20. The Internal Audit Outsourcing

    Directory of Open Access Journals (Sweden)

    Grzegorz Gołębiowski

    2010-06-01

    Full Text Available The article explores an issue of the internal audit outsourcing. It indicates the differences between internal audit, outsourcing and cosourcing of this service as well as their advantages and disadvantages. Drawing from the research on internal audit outsourcing the recent market trends were identified as well as motivations for choosing different forms of internal auditing.

  1. Study on Preparation of Water Soluble Polyester Insulation Electrophoretic Coating by Using Waste Polyester Bottle as Raw Material%废聚酯瓶制取水溶性聚酯绝缘电泳漆的研究

    Institute of Scientific and Technical Information of China (English)

    陈玉滨; 吴津成; 陈文波

    2013-01-01

    Water soluble polyester resin for insulation electrophoretic coating was prepared by using waste polyester bottle as raw materials and a series of chemical reactions. The influence factors such as catalyst, dosage and kinds of polyol and anhydride on water soluble polyester insulation electrophoretic coating were studied.%采用废聚酯瓶为原材料,经一系列化学反应,制得漆包线用水溶性聚酯绝缘电泳漆树脂。考察了催化剂、多元醇和酸酐的种类及用量对水溶性聚酯绝缘电泳漆的影响。

  2. Features partnership in auditing

    Directory of Open Access Journals (Sweden)

    V.P. Bondar

    2015-06-01

    Full Text Available The notion of «institution partnerships in the audit» and its importance in Ukraine. Done overview of international experience in the Institute of partnerships in the audit business. Determined the nature of the audit, rights, duties and powers of the partnership during the audit. Done distribution of functions between the partner and the engagement partner in the synthesis of these blocks: taking on a new customer service or continued cooperation with existing customers (clients; familiarization with activities of customer audits, including an understanding of its internal control system; identification and assessment of risks of material misstatement of accounting; audit process and the audit and the formation of the final judgment. On the basis of the distribution of functions between the partner and the engagement partner, defined the overall structure of management system auditing firm. These conditions for implementation of partnerships in the audit business, and identified a number of advantages and disadvantages of partnerships for auditing.

  3. 40 CFR 141.808 - Audits and inspections.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Aircraft Drinking Water Rule § 141.808 Audits and...) Reviews and audits of records as they pertain to water system operations and maintenance such as log..., disinfection and flushing, and general maintenance and self-inspections of aircraft water system. (b) Air...

  4. Avaliação da concentração de flúor em águas minerais comercializadas no Brasil Evaluation of fluoride content of bottled drinking waters in Brazil

    Directory of Open Access Journals (Sweden)

    Rita S. Villena

    1996-12-01

    Full Text Available A utilização de flúor sistêmico deve ser controlada em termos de risco/benefício, pois enquanto a subdosagem não trouxer benefício anticárie, a sobredosagem estará associada com fluorose dental. Assim, uma das preocupações é o consumo de águas minerais, o qual tem aumentado nos últimos anos. Deste modo, foi realizado estudo com o objetivo de analisar a concentração de flúor em águas minerais comercializadas no Brasil. Foram analisadas 104 marcas comerciais, de diferentes regiões do País. Utilizou-se eletrodo específico Orion 96-09 e analisador de íons Orion EA 940, previamente calibrados com soluções padrões de flúor. Foram observadas concentrações de flúor variando de 0,0 a 4,4 ppm. Constataram-se: 1 Concentrações significativas de flúor não relatadas pelo produtor; 2 Concentrações de flúor sem significado preventivo anti-cárie, embora o produtor destaque na embalagem "Água Mineral Fluoretada"; 3 Concentrações de flúor capazes de provocar fluorose dental severa, embora o produtor não faça nenhuma referência que o mesmo existe. Conclui-se ser necessário um Sistema de Vigilância Sanitária para o controle de flúor nas águas minerais oferecidas à população brasileira, quer seja em termos de benefício como de risco.The utilization of a systemic fluoride method must be controlled in terms of risks and benefits. The reason for this is that while a small dose will not be effective in preventing dental caries, a larger dose may cause dental fluorosis. Therefore the knowledge of the fluoride concentration found in the bottled mineral waters sold throughout the Brazilian market the consumption of which has increased lately, is of great concern. The objective of the study was the analysis of the concentration of fluoride found in the bottled mineral waters. A hundred and four brands coming from different regions of Brazil were analysed using an Orion 96-09 ion specific electrode and an Orion EA 940

  5. 江门市桶装饮用水二次污染状况及其影响因素%Status of secondary contamination of bottled drinking water and its influencing factors

    Institute of Scientific and Technical Information of China (English)

    刘鹰航; 尹本康; 钟瑞美; 赵劲文

    2013-01-01

    [Objective] To understand the status of microbe secondary contamination of bottled drinking water in the use of drinking water supply apparatus and explore its influencing factors,and provide scientific basis for improving the sanitary status of drinking water supply apparatus to decrease secondary contamination.[Methods] A total of 79 ordinary drinking water supply apparatus in use were randomly sampled as the objects of bacteriological investigation,among them,19 drinking water supply apparatus had not been cleaned and another 13 drinking water supply apparatus had been cleaned,and their status of microbe contamination were tracked and observed.[Results] The contamination rates of the water that discharged from cold water valve of 79 drinking water supply apparatus for total bacterial count,mould + yeast and coliform group were 82.3%,34.2% and 10.1%,respectively.thermotolerant coliform bacteria and pathogenic bacteria were not detected.After cleaning,the contamination rates of bottled drinking water showed significant difference as compared with the same apparatus before cleaning(x2 =12.764,P <0.01).[Conclusion]The serious microbe secondary contamination of bottled drinking water that caused by drinking water supply apparatus in use still exists in Jiangmen City.It is very necessary to clean drinking water supply apparatus regularly and appropriately.%目的 了解江门市饮水机在使用过程中对桶装饮用水产生的微生物二次污染状况并对其影响因素进行探讨,为进一步改善饮水机的卫生状况、减少二次污染提供科学依据.方法 随机抽取79台正在使用的普通饮水机进行细菌学调查,并对其中19台污染前情况和13台清洗后进行追踪观察.结果 79台饮水机其冷水阀出水的细菌总数、霉菌+酵母菌和大肠菌群污染率分别为82.3%、34.2%和10.1%,耐热大肠菌群和致病菌未检出;饮水机清洗前后对比其污染率差异有统计学意义(x2=12.764,P

  6. 27 CFR 19.382 - Bottling tanks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling tanks. 19.382... Manufacture of Articles Bottling, Packaging, and Removal of Products § 19.382 Bottling tanks. All spirits shall be bottled from tanks listed and certified as accurately calibrated in the notice of...

  7. Variations on the "Whoosh" Bottle Alcohol Explosion Demonstration Including Safety Notes

    Science.gov (United States)

    Fortman, John J.; Rush, Andrea C.; Stamper, Jennifer E.

    1999-08-01

    The explosion or burning of methanol, ethanol, n-propanol, and isopropanol in large small-necked bottles when ignited with a match has been studied with respect to the nature of the alcohol, temperature, concentration dilutions with water, oxygen concentration, plastic versus glass bottles, and salts added for color. The various effects are explained in terms of vapor pressures. Safety guidelines are emphasized.

  8. Audit v bance

    OpenAIRE

    Kiesewetterová, Lucie

    2009-01-01

    Diploma thesis discusses questions about internal audit. I have focused on internal audit in the bank. I analyzed four czech banks if they had established internal audit section and Audit Comitee and how many internal auditors they employ. In the second practical part I described internal audit as a process. I demonstrated it on the internal audit of mortgage credit process.

  9. Audit v bance

    OpenAIRE

    Kiesewetterová, Lucie

    2009-01-01

    Diploma thesis discusses questions about internal audit. I have focused on internal audit in the bank. I analyzed four czech banks if they had established internal audit section and Audit Comitee and how many internal auditors they employ. In the second practical part I described internal audit as a process. I demonstrated it on the internal audit of mortgage credit process.

  10. [Safety verification for reuse of PET and glass bottles].

    Science.gov (United States)

    Hayashi, Eiichi; Imai, Toshio; Niimi, Hiroji

    2011-01-01

    In order to verify the safety associated with reusing PET and glass bottles, a challenge test was conducted with five surrogate contaminants: 1,1,1-trichloroethane, chlorobenzene, toluene, benzophenone and phenyl cyclohexane. Bottles were filled with a cocktail solution of these contaminants and stored at 50 °C for 7 days, then washed with water and alkaline solutions. Material and migration tests were conducted at each step. The material test results showed that 430-1,440 µg/g of the contaminants were retained after water washing, and that even after washing with a 3.5% NaOH solution, 225-925 µg/g of the contaminants were retained. The migration tests revealed that 0.095-7.35 µg/mL of the contaminants were eluted. Similar tests were conducted with a soft drink ingredient, limonene. The results revealed that 48 µg/g of limonene was retained even after washing with NaOH solution, and that 0.16 µg/mL of limonene was eluted. Conversely, no contaminants were eluted from glass bottles after washing with the NaOH solution. Thus, from the viewpoint of safety and the preservation of content quality, PET bottles are not considered suitable for reuse when compared with glass bottles.

  11. The Future of Audit

    Directory of Open Access Journals (Sweden)

    Danielle Lombardi

    2014-10-01

    Full Text Available The purpose of this study is to discuss the current state and future of auditing. Expert consensus is used as a basis to examine the current state of auditing and generate modifications both needed and likely to occur in the audit profession. This study contributes to the literature by using the Delphi method to develop predictions as to the direction of the audit industry and discuss the implications associated with these predictions. If auditors can better understand where the profession stands and where it is headed, then they can better prepare for the future. Some predictions emerging from this study relative to future audit practices include increasing automation of audit procedures, more predictive financial statements, continuous auditing of financial statements and transactions, and an increasingly global perspective regarding audit activities.

  12. Audit Information Management System

    Data.gov (United States)

    US Agency for International Development — USAID/OIG has initiated its new Audit Information Management System (AIMS) to track OIG's audit recommendations and USAID's management decisions. OIG's in-house...

  13. Non-invasive determination of ethanol, propylene glycol and water in a multi-component pharmaceutical oral liquid by direct measurement through amber plastic bottles using Fourier transform near-infrared spectroscopy.

    Science.gov (United States)

    Broad, N W; Jee, R D; Moffat, A C; Eaves, M J; Mann, W C; Dziki, W

    2000-11-01

    Fourier transform near-infrared (FT-NIR) spectroscopy was used to quantify rapidly the ethanol (34-49% v/v), propylene glycol (20-35% v/v) and water (11-20% m/m) contents within a multi-component pharmaceutical oral liquid by measurement directly through the amber plastic bottle packaging. Spectra were collected in the range 7302-12,000 cm-1 and calibration models set-up using partial least-squares regression (PLSR) and multiple linear regression. Reference values for the three components were measured using capillary gas chromatography (ethanol and propylene glycol) and Karl Fischer (water) assay procedures. The calibration and test sets consisted of production as well as laboratory batches that were made to extend the concentration ranges beyond the natural production variation. The PLSR models developed gave standard errors of prediction (SEP) of 1.1% v/v for ethanol, 0.9% v/v for propylene glycol and 0.3% m/m for water. For each component the calibration model was validated in terms of: linearity, repeatability, intermediate precision and robustness. All the methods produced statistically favourable outcomes. Ten production batches independent of the calibration and test sets were also challenged against the PLSR models, giving SEP values of 1.3% v/v (ethanol), 1.0% v/v (propylene glycol) and 0.2% m/m (water). NIR transmission spectroscopy allowed all three liquid constituents to be non-invasively measured in under 1 min.

  14. Georgia : Accounting and Auditing

    OpenAIRE

    2007-01-01

    This report provides an assessment of accounting, financial reporting and auditing requirements and practices within the enterprise and financial sectors in Georgia. The report uses International Financial Reporting Standards (IFRS), International Standards on Auditing (ISA) and draws on international experience and good practices in the field of accounting and audit regulation, including in ...

  15. ICT in Auditing

    DEFF Research Database (Denmark)

    Kacanski, Slobodan

    2016-01-01

    , in the context of assurance service. A case study was carried out with auditors affiliated with Danish subsidiaries of Big 4 audit firms to inspect the implementation and utilization of global audit methodology (GAM), which is the ICT-based platform that guides subordinate auditors through the audit process...

  16. Pollution Causes and Treatment of Pseudomonas Aeruginosa in Bottled Drinking Water%桶装饮用水中铜绿假单胞菌污染原因及处理方法

    Institute of Scientific and Technical Information of China (English)

    陈梦; 周翔; 王爱媛

    2015-01-01

    Pseudomonas aeruginosa contamination of bottled drinking water cause investigation of a company appear, found water wells contaminated by surface water seepage; iflling line design flaw is backwash source water pollution. At the same error as companies use reverse osmosis water wash turnover barrels produced and rinse the ground and cause cross-contamination; guide enterprises to identify the reason for water, workshops, iflling lines and other contaminated areas with 5% food-grade hydrogen peroxide disinfection , scrapped off water wells unusable. After a comprehensive approach to cleaning and disinfection, re-sample testing showed no contamination of Pseudomonas aeruginosa.%调查某企业桶装饮用水出现铜绿假单胞菌污染的原因,分析发现水源井受到地表渗水污染;灌装线存在设计缺陷被反冲洗水污染。同时由于企业错误使用反渗透产生的废水洗刷周转桶及冲洗地面进而造成交叉污染;查明原因后指导企业对水源、生产车间和灌装线等受到污染的地方用5%食品级双氧水进行消毒处理,报废掉不能用的水源井。全面处理清洗消毒之后,重新取样检测,未发现有铜绿假单胞菌污染。

  17. A Plastic Bottle in Rectosigmoid

    Directory of Open Access Journals (Sweden)

    A. Derakhshanfar

    2007-07-01

    Full Text Available Introduction: Evaluation and treatment of foreign bodies in rectum involves careful history and physical examination. The cases of forced introduction of the objects most commonly are , sexual assault , self – introduced for anal eroticism and accidental insertion.Case Report: We describe a case of a patient with rectal impaction following self administration of a plastic bottle for anal sexual gratification. A 49 years old man was admitted in the emergency department with the history of self introduced a bottle into his rectum physical examination and abdominal X-Ray diagnosed the case as impacted foreign body in rectosigmoid. An attempt was made to deliver the bottle through the rectum but because of high lying big bottle in the sigmoid laporotomy was performed and the bottle was removed though a longitudinal incision on sigmoid colon.Conclusion: Retained rectosigmoid foreign bodies have been encountered more frequently and present a dilemma for management and rarely laporotomy for extraction of foreign bodies was performed.

  18. Personnel Audit Process

    Directory of Open Access Journals (Sweden)

    Wojciech Pająk

    2012-06-01

    Full Text Available Audit is one of the basic issues in organisation and management. It consists of a number of constituent problems. One of them is the problem of research methodology. On the other hand, internal audit plays an increasingly important role in improvement of the functioning of an organisation . An attempt to apply the concept of internal audit for the purposes of diagnosing human resource management is the subject matter of this paper. Apart from the problems strictly related to the essence of methodology of personnel audit, an attempt was made to determine the problem range determined by this audit.

  19. Creation of Auditing Knowledge:

    DEFF Research Database (Denmark)

    Liempd, Dennis van

      Even though auditing research could play a role in understanding the many challenges that are threatening the profession, and in providing possible solutions, it seems to have failed in adequately doing so. This is for a major part because of a lack of research into auditing's basic assumptions......, and a too one-sided view on the creation of auditing knowledge. The purpose of this paper is to call for more (diverse) research in this area. Earlier calls have been few and far between, and have not resulted in a lot of research. Within the last two decades though, the auditing universe has changed so...... much that high-quality auditing research never has been needed more. By reviewing available literature challenges to the auditing profession are explored, and the creation of knowledge in general and auditing knowledge in particular are discussed with respect to methodological approaches and operative...

  20. Audits Made Simple

    Energy Technology Data Exchange (ETDEWEB)

    Belangia, David Warren [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-04-09

    A company just got notified there is a big external audit coming in 3 months. Getting ready for an audit can be challenging, scary, and full of surprises. This Gold Paper describes a typical audit from notification of the intent to audit through disposition of the final report including Best Practices, Opportunities for Improvement (OFI), and issues that must be fixed. Good preparation can improve the chances of success. Ensuring the auditors understand the environment and requirements is paramount to success. It helps the auditors understand that the enterprise really does think that security is important. Understanding and following a structured process ensures a smooth audit process. Ensuring follow-up on OFIs and issues in a structured fashion will also make the next audit easier. It is important to keep in mind that the auditors will use the previous report as a starting point. Now the only worry is the actual audit and subsequent report and how well the company has done.

  1. Low-density solvent-based vortex-assisted surfactant-enhanced-emulsification liquid-liquid microextraction combined with gas chromatography-mass spectrometry for the fast determination of phthalate esters in bottled water.

    Science.gov (United States)

    Zhang, Yufeng; Lee, Hian Kee

    2013-01-25

    For the first time, a novel low-density solvent-based vortex-assisted surfactant-enhanced-emulsification liquid-liquid microextraction (LDS-VSLLME) was developed for the fast, simple and efficient determination of six phthalate esters (PEs) in bottled water samples followed by gas chromatography-mass spectrometry (GC-MS). In the extraction procedure, the aqueous sample solution was injected into a mixture of extraction solvent (toluene) and surfactant (cetyltrimethyl ammonium bromide), which were placed in a glass tube with conical bottom, to form an emulsion by the assistance of vortex agitation. After extraction and phase separation by centrifugation, and removal of the spent sample, the toluene extract was collected and analyzed by GC-MS. The addition of surfactant enhanced the dispersion of extraction solvent in aqueous sample and was also favorable for the mass transfer of the analytes from the aqueous sample to the extraction solvent. Moreover, using a relatively less toxic surfactant as the emulsifier agent overcame the disadvantages of traditional organic dispersive solvents that are usually highly toxic and expensive and might conceivably decrease extraction efficiency to some extent since they are not as effective as surfactants themselves in generating an emulsion. With the aid of surfactant and vortex agitation to achieve good organic extraction solvent dispersion, extraction equilibrium was achieved within 1 min, indicating it was a fast sample preparation technique. Another prominent feature of the method was the simple procedure to collect a less dense than water solvent by a microsyringe. After extraction and phase separation, the aqueous sample was removed using a 5-mL syringe, thus leaving behind the extract, which was retrieved easily. This novel method simplifies the use of low-density solvents in DLLME. Under the optimized conditions, the proposed method provided good linearity in the range of 0.05-25 μg/L, low limits of detection (8-25 ng

  2. 18 CFR 37.7 - Auditing Transmission Service Information.

    Science.gov (United States)

    2010-04-01

    ... SYSTEMS § 37.7 Auditing Transmission Service Information. (a) All OASIS database transactions, except... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Auditing Transmission Service Information. 37.7 Section 37.7 Conservation of Power and Water Resources FEDERAL ENERGY...

  3. Analytical laboratory quality audits

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, William D.

    2001-06-11

    Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

  4. The Exploration of Correlation between the Replacing Interval of Water-seal Bottle and the Thoracic Infections%一次性水封瓶更换时间与胸腔感染之间的相关性探讨

    Institute of Scientific and Technical Information of China (English)

    王正云; 吴西枝

    2014-01-01

    Objective To investigate the correlation between the replacing interval of disposable water-seal bottle and thoracic infections. Methods 404 patients with thoracic closed drainage and without thoracic infections at the beginning participated in this study. Patients were randomly divided into 4 groups according to random number table. Bacterial culture was performed for normal saline and drainage fluid in the water-seal bottle as well as the thoracic transudate or effusion in 2 cm length of the drainage tube end. The results were compared statistically. Results Bacterium was not found in normal saline in the disposable water-seal bottle but was found in 14 drainage fluid specimens from 4 groups and totally 8 kinds of bacterium were found. The bacteria were firstly found in Group A when it was the third time to replace the bottle (on the third day). Group C is the last group to be found bacteria when it was the second time to replace the bottle (on the fourteenth day). No significant difference was found among the four groups (P>0. 05). Bacteria were found in 2 of 404 cases with bacterial culture of thoracic transudate or effusion in 2 cm length of the drainage tube end. The bacteria type of one case was the same with the drainage fluid in the disposable water-seal bottle while the other was different. Conclusion The replacing interval of water-seal bottle has no obvious correlation with thoracic infection and bacterium reproduction in the bottle. To replace the water-seal bottle every 7 days is reasonable for those patients requiring longer chest tube placement.%目的探讨更换一次性水封瓶时间长短与胸腔感染的临床意义。方法对404例行胸腔闭式引流而且排除胸腔感染者使用随机数字表分为4组,同时对404例患者的胸腔内积液或胸腔引流管前端2厘米进行细菌培养[1],最后进行统计学分析。结果一次性水封瓶内生理盐水的细菌培养均为阴性,4组水封瓶中胸腔引流液

  5. 27 CFR 31.232 - Wine bottling.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Wine bottling. 31.232... OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  6. Plasma sterilization of polyethylene terephthalate bottles by pulsed corona discharge at atmospheric pressure.

    Science.gov (United States)

    Masaoka, Satoshi

    2007-06-01

    A pulsed power supply was used to generate a corona discharge on a polyethylene terephthalate bottle, to conduct plasma sterilization at atmospheric pressure. Before generating such a discharge, minute quantities of water were attached to the inner surface of the bottle and to the surface of a high voltage (HV) electrode inserted into the bottle. Next, high-voltage pulses of electricity were discharged between electrodes for 6.0s, while rotating the bottle. The resulting spore log reduction values of Bacillus subtilis and Aspergillus niger on the inner surface of the bottle were 5.5 and 6 or higher, respectively, and those on the HV electrode surface were each 6 or higher for both strains. The presence of the by-products gaseous ozone, hydrogen peroxide, and nitric ions resulting from the electrical discharge was confirmed.

  7. 46 CFR Sec. 12 - Audit.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Audit. Sec. 12 Section 12 Shipping MARITIME... TRANSACTIONS UNDER AGENCY AGREEMENTS Reports and Audit Sec. 12 Audit. (a) The owner will audit as currently as possible subsequent to audit by the agent, all documents relating to the activities, maintenance...

  8. Application of Business Risk Auditing among Audit Firms in Western ...

    African Journals Online (AJOL)

    Toshiba

    Key words: Business Risk Auditing, Audit firms, Kenya. Introduction ... reporting requirements in the 1990s, coupled with more dynamic client business .... shareholders and the general users of audited financial information especially after the ...

  9. General Motors plant environmental auditing program

    Energy Technology Data Exchange (ETDEWEB)

    Barzotti, J.P.

    1984-01-01

    This report discusses General Motors environmental audit activities in the stationary source area. From the late 1960s through the 1970s, a wide range of environmental and safety legislation was enacted. As a result, GM expanded its environmental staff to ensure compliance and increase employee awareness of regulatory requirements. This report traces the development and operation of the GM Industrial Environmental Performance Review or Plant Environmental Audit, as it is most often called. The Plant Environmental Audit Group was established in 1972 to provide corporate, divisional, and local management with accurate, periodic engineering evaluations of the environmental conditions at each manufacturing facility. The scope of the plant audit includes the environmental categories of air and water quality, waste materials handling and disposal, energy conservation, and certain OSHA-related functions that are considered plant engineering responsibilities (noise abatement, maintenance records, etc.).

  10. Analysis on Microorganism Test Results of Bottled Drinking Water in Hnnan Province from 2006 to 2009%2006-2009年湖南省桶装饮用水微生物检验结果分析

    Institute of Scientific and Technical Information of China (English)

    刘建琪; 王岚; 刘运芝; 张林青; 杨烈; 贾华云; 胡旃; 张红

    2011-01-01

    Objective To investigate the microorganisms in bottled drinking water, and to appraise the drinking security. Methods According to the related national standardized methods, the total number of colony, coliform bacteria, pathogenic bacterium, mould and yeast fungus in purified water, drinking water and mineral water were detected by laboratory tests. And then we compared the difference of the qualification ratio of the submitted samples and the sampling inspection samples with SPSS statistic software. Results The total qualification ratio of 147 samples was 65.3% , which was mainly caused by the index of total plate count. The qualification ratios of various drirking water were not equally and the there were statistically significant differences among them (x2 =22.48, P<0.01). The qualification ratio of the submitted samples was 76.5%, which was higher than that (51.5%) of the sampling inspection samples, and the difference was statistically significant (X2 = 101, P<0.05). Conclusions Strengthening the health supervision of bottled drinking water will be benefit to enlighten the quality of drinking water.%目的 了解湖南省桶装饮用水卫生微生物污染状况,分析其饮用安全性. 方法 按国家饮用水检测标准方法对桶装纯净水、饮用水、矿泉水进行菌落总数、大肠菌群、致病菌、霉菌和酵母菌的实验室培养与检测,应用SPSS 15.0统计学软件分析不同饮用水总合格率之间的差异,并对抽检样品与送检样品的合格率进行比较. 结果 147份桶装饮用水合格率为65.3%,不合格指标以菌落总数为主;2006 - 2009年不同饮用水之间总合格率差异有统计学意义(X2=22 48,P<0.01);送检样品合格率为76.5%,高于抽检样品合格率51.5%,差异有统计学意义(X2=10.1,P<0.05).结论 加大力度对桶装纯净水进行卫生监督监测工作,找出关键控制点,是抓好桶装饮用水卫生质量的关键.

  11. Audit mode change,corporate governance and audit effort

    Institute of Scientific and Technical Information of China (English)

    Limei; Cao; Wanfu; Li; Limin; Zhang

    2015-01-01

    This study investigates changes in audit strategy in China following the introduction of risk-based auditing standards rather than an internal control-based audit mode.Specifically,we examine whether auditors are implementing the risk-based audit mode to evaluate corporate governance before distributing audit resources.The results show that under the internal control-based audit mode,the relationship between audit effort and corporate governance was weak.However,implementation of the risk-based mode required by the new auditing standards has significantly enhanced the relationship between audit effort and corporate governance.Since the change in audit mode,the Big Ten have demonstrated a significantly better grasp of governance risk and allocated their audit effort accordingly,relative to smaller firms.The empirical evidence indicates that auditors have adjusted their audit strategy to meet the regulations,risk-based auditing is being achieved to a degree,reasonable and effective corporate governance helps to optimize audit resource allocation,and smaller auditing firms in particular should urgently strengthen their risk-based auditing capability.Overall,our findings imply that the mandatory switch to risk-based auditing has optimized audit effort in China.

  12. Audit Management System

    CERN Document Server

    Alconada, Federico

    2015-01-01

    In the need of renewing their system, the Internal Audit department has given a proposal for building a new one. Taking into consideration the problems of their system they elaborated a requirement's list with the functionalities and features they were expecting from the new management system. This new system would be primarily for the use of the Internal Audit staff but it would also support the follow-up of internal audit recommendations by potentially all CERN staff members.

  13. Auditing radiation sterilization facilities

    Science.gov (United States)

    Beck, Jeffrey A.

    The diversity of radiation sterilization systems available today places renewed emphasis on the need for thorough Quality Assurance audits of these facilities. Evaluating compliance with Good Manufacturing Practices is an obvious requirement, but an effective audit must also evaluate installation and performance qualification programs (validation_, and process control and monitoring procedures in detail. The present paper describes general standards that radiation sterilization operations should meet in each of these key areas, and provides basic guidance for conducting QA audits of these facilities.

  14. Environmental audit: Fossil energy sites in Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    This report documents the results of the Comprehensive Baseline Environmental Audit completed for Selected Fossil Energy Sites in Wyoming. During this Audit, facilities, field sites, and activities were investigated and inspected in several areas of Wyoming that are considered to be representative of offsite work falling under the purview of the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. Department of Energy (DOE) personnel at METC and at the Liquid Fuels Technology Branch (LFTB) in Laramie, Wyoming were interviewed as were DOE contractors and Federal and state regulators. Extensive document review was also a key part of this Audit. The on-site portion of the Audit occurred in Morgantown from May 18 to 22, 1992, and throughout Wyoming from May 26 through June 10, 1992. EH-24 carries out independent assessments of DOE facilities and DOE-funded off-site activities as part of the Assistant Secretary's Environmental Audit Program. That program is designed to evaluate the status of facilities and activities regarding compliance with environmental laws, regulations, DOE Directives, formal written procedures, compliance agreements, and Best Management Practices (BMPs). This internal oversight function plays an important role in improving the compliance status of DOE operations. The Audit stresses the fact that it is the responsibility of line management to conduct operations in an environmentally sound and safe manner. The scope of this Environmental Audit was comprehensive, covering all areas of environmental activities and waste management operations with the exception of the National Environmental Policy Act (NEPA), which is beyond the purview of EH-24. Specifically included within this Audit were Air, Soils/Sediment/Biota, Surface Water/Drinking Water, Groundwater, Waste Management, Toxic and Chemical Materials, Quality Assurance, Radiation, Inactive Waste Sites, and Environmental Management.

  15. Environmental audit: Fossil energy sites in Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    This report documents the results of the Comprehensive Baseline Environmental Audit completed for Selected Fossil Energy Sites in Wyoming. During this Audit, facilities, field sites, and activities were investigated and inspected in several areas of Wyoming that are considered to be representative of offsite work falling under the purview of the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. Department of Energy (DOE) personnel at METC and at the Liquid Fuels Technology Branch (LFTB) in Laramie, Wyoming were interviewed as were DOE contractors and Federal and state regulators. Extensive document review was also a key part of this Audit. The on-site portion of the Audit occurred in Morgantown from May 18 to 22, 1992, and throughout Wyoming from May 26 through June 10, 1992. EH-24 carries out independent assessments of DOE facilities and DOE-funded off-site activities as part of the Assistant Secretary`s Environmental Audit Program. That program is designed to evaluate the status of facilities and activities regarding compliance with environmental laws, regulations, DOE Directives, formal written procedures, compliance agreements, and Best Management Practices (BMPs). This internal oversight function plays an important role in improving the compliance status of DOE operations. The Audit stresses the fact that it is the responsibility of line management to conduct operations in an environmentally sound and safe manner. The scope of this Environmental Audit was comprehensive, covering all areas of environmental activities and waste management operations with the exception of the National Environmental Policy Act (NEPA), which is beyond the purview of EH-24. Specifically included within this Audit were Air, Soils/Sediment/Biota, Surface Water/Drinking Water, Groundwater, Waste Management, Toxic and Chemical Materials, Quality Assurance, Radiation, Inactive Waste Sites, and Environmental Management.

  16. Qlikview Audit Tool (QLIKVIEW) -

    Data.gov (United States)

    Department of Transportation — This tool supports the cyclical financial audit process. Qlikview supports large volumes of financial transaction data that can be mined, summarized and presented to...

  17. Computer assisted audit techniques

    Directory of Open Access Journals (Sweden)

    Dražen Danić

    2008-12-01

    Full Text Available The purpose of this work is to point to the possibilities of more efficient auditing. In the encirclement of more and more intensive use of computer techniques that help to CAAT all the aims and the volume of auditing do not change when the audit is done in the computer-informatics environment. The computer assisted audit technique (CAATs can improve the efficiency and productivity of audit procedures. In the computerized information system, the CAATs are the ways in which an auditor can use computer to gather or as help in gathering auditing evidence. There are more reasons why the auditors apply computer techniques that help in auditing. Most often, they do it to achieve improvement of auditing efficiency when the data volume is large. It depends on several factors whether the auditors will apply the computer techniques that help auditing and to what degree respectively. If they do it, the most important are the computer knowledge, professional skill, experience of auditors, and availability of computer technique, and adequacy of computer supports, infeasibility of hand tests, efficiency and time limit. Through several examples from practice, we showed the possibilities of ACL as one of the CAAT tools.

  18. Audit in clinical practice.

    Science.gov (United States)

    Modayil, Prince Cheriyan; Panchikkeel, Ragesh Kuyyattil; Alex, Nisha

    2009-06-01

    Audit dates back to as early as 1750 BC when king Hammurabi of Babylon instigated audit for clinicians with regard to outcome. Clinical audit is a way of fi nding out whether we are doing what we should be doing. It also verifi es whether we are applying the best practice. An audit cycle involves setting-up of standards, measuring current practice, comparing results with standards (criteria), changing practice and re-auditing to make sure practice has improved A 'clinical audit' is a quality improvement process that seeks to improve patient care and clinical outcomes through a systematic review of care against explicit criteria, and the implementation of change. Changes are implemented at an individual, team or service level and a subsequent re-audit is done to confi rm improvement in health care delivery. The importance of audit in healthcare sector needs to be appreciated by the relevant authorities. The most frequently cited barrier to successful audit is the failure of organizations to provide suffi cient fund and protected time for healthcare teams.

  19. Complex logistics audit system

    Directory of Open Access Journals (Sweden)

    Zuzana Marková

    2010-02-01

    Full Text Available Complex logistics audit system is a tool for realization of logistical audit in the company. The current methods for logistics auditare based on “ad hok” analysis of logisticsl system. This paper describes system for complex logistics audit. It is a global diagnosticsof logistics processes and functions of enterprise. The goal of logistics audit is to provide comparative documentation for managementabout state of logistics in company and to show the potential of logistics changes in order to achieve more effective companyperformance.

  20. 地埋式瓶灌初步研究--一种提高低水头自压式灌溉灌水均匀度的新方法%A Preliminary Study of Underground Bottle Irrigation:A New Method that can Increase the Irrigation Uniformity of Low Water Head Gravitational Irrigation

    Institute of Scientific and Technical Information of China (English)

    马璠; 董立国; 蔡进军; 许浩; 张源润

    2013-01-01

    为了解决半干旱黄土丘陵沟壑区集雨节灌系统在自压灌溉方式下灌水均匀度低的问题,提出了一种提高低水头自压式灌溉的灌水均匀度的新方法--地埋式瓶灌,对该灌溉方法的原理进行了阐述,并在风干、疏松的黏壤土中对该方法的地下渗灌环节进行了初步研究。结果表明,地埋式瓶灌能在渗灌瓶周围形成一个土壤含水量相对均匀的椭球形湿润土体,灌水5L后1~2天,水分水平扩散至距瓶身10~15 cm处,竖直向下扩散至距瓶底16~23 cm处,湿润土体内平均土壤含水量约17%,灌溉水不会发生深层渗漏。另外,湿润土体的形状、范围,以及湿润土体内土壤含水量等与渗灌瓶开孔方式之间的关系并不强,这便于渗灌瓶在田间的布设。研究提出的地埋式瓶灌方法,原理简单,适宜性强,在半干旱黄土丘陵沟壑区林果业生产中具有广阔的应用前景。%In order to resolve the problem of low irrigation uniformity of rainwater harvesting and gravitational irrigation systems, this study advanced a new method that could increase the irrigation uniformity of low water head gravitational irrigation: underground bottle irrigation, demonstrated the principle of this method, and conducted a preliminary research on the underground step of this method in air dried, loose soil. The results showed that: underground bottle irrigation could form an ellipsoidal wet soil body which had relatively even distributed soil water content around the bottle. 1-2 days after 5 L water was irrigated, water spread horizontally to 10-15 cm from the bottle and vertically to 16-23 cm from bottom of the bottle. The average water content in the wet soil body was about 17%. The irrigation water wouldn’t percolate to deep soil layers. Moreover, the characteristics of the wet soil body and the dill method of irrigation bottle were not well related, which was convenient for arrangement of

  1. Audit mode change, corporate governance

    Directory of Open Access Journals (Sweden)

    Limei Cao

    2015-12-01

    Full Text Available This study investigates changes in audit strategy in China following the introduction of risk-based auditing standards rather than an internal control-based audit mode. Specifically, we examine whether auditors are implementing the risk-based audit mode to evaluate corporate governance before distributing audit resources. The results show that under the internal control-based audit mode, the relationship between audit effort and corporate governance was weak. However, implementation of the risk-based mode required by the new auditing standards has significantly enhanced the relationship between audit effort and corporate governance. Since the change in audit mode, the Big Ten have demonstrated a significantly better grasp of governance risk and allocated their audit effort accordingly, relative to smaller firms. The empirical evidence indicates that auditors have adjusted their audit strategy to meet the regulations, risk-based auditing is being achieved to a degree, reasonable and effective corporate governance helps to optimize audit resource allocation, and smaller auditing firms in particular should urgently strengthen their risk-based auditing capability. Overall, our findings imply that the mandatory switch to risk-based auditing has optimized audit effort in China.

  2. Microbiologicals characteristics of Tenerife island's bottled waters; Caracteristicas microbiologicas de las aguas de bebida envasada de la isla de Tenerife

    Energy Technology Data Exchange (ETDEWEB)

    Hardisson de la Torre, A.; Arco del Aguilar, A. L.; Galvan Gonzalez, M. A.; Pinero Sicicila, L. M.; Fernandez Molina, J. C.; Caballero Mesa, A. M.

    2001-07-01

    An exhaustive control of the sanitary quality of water is becoming more and more necessary. Therefore, in this study we are pretending to determine the degree of adequacy to the present technical and sanitary regulations by analyzing different water samples produced by companies located on Tenerife. Microbiological parameters have been studied, such as: aerobic bacteria recounts at 37 degree centigree and at 20-22 degree centigree, total Coliforms investigation, E, coli, faecalis Streptococcus, sulphite reducers Clostridium, Pseudomas aeruginosa and Salmonella. The results show the presence of Pseudomonas in two of the water samples and the presence of sulphite reducers Clostridum in one of the samples. (Author) 10 refs.

  3. Relief Aid Carefully Audited

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In a recent interview with the national TV broadcaster CCTV,Wang Zhongxin,Director of the Social Security Audit Department at the National Audit Office,talks about the procedures that are in effect to ensure relief supplies for the Wenchuan earthquake victims reach the end users. Excerpts of

  4. Indonesia : Accounting and Auditing

    OpenAIRE

    World Bank

    2011-01-01

    This report is part of a joint initiative of the World Bank and IMF to prepare Reports on the Observance of Standards and Codes (ROSC). The ROSC Accounting and Auditing review for Indonesia mainly focuses on the strengths and weaknesses of the accounting and auditing environment that influences the quality of corporate financial reporting. It involves both a review of mandatory requirement...

  5. Bulgaria : Accounting and Auditing

    OpenAIRE

    World Bank

    2008-01-01

    An assessment of accounting and auditing practices in Bulgaria is a part of the World Bank and the International Monetary Fund (IMF) joint initiative on reports on the Observance of Standards and Codes (ROSC). The assessment focused on the strengths and weaknesses of the accounting and auditing environment that influences the quality of corporate financial reporting. It used the Internatio...

  6. Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 2: The intake of sodium and potassium.

    Science.gov (United States)

    Gątarska, Anna; Ciborska, Joanna; Tońska, Elżbieta

    Natural mineral waters are purchased and consumed according to consumer preferences and possible recommendations. The choice of appropriate water should take into account not only the general level of mineralization but also the content of individual components, including electrolytes such as sodium and potassium. Sodium is necessary to ensure the proper physiological functions of the body. It is defined as a health risk factor only when its excessive intake occurs. Potassium acts antagonistically towards sodium and calcium ions, contributes to a reduction of the volume of extracellular fluids and at the same time reduces muscle tension and permeability of cell membranes. The demand for sodium and potassium is of particular importance in people expending significant physical effort, where an increased electrolyte supply is recommended. The aim of the study was to estimate the content of sodium and potassium in natural mineral waters available in the Polish market and to evaluate the intake of those components with the commercially available mineral waters by different groups of consumers at the assumed volume of their consumption. The research material consisted of natural mineral waters of forty various brands available on the Polish market. The examined products were either produced in Poland or originated in other European countries. Among the products under examination, about 30% of the waters were imported from Lithuania, Latvia, the Czech Republic, France, Italy and Germany. A sample for analyses consisted of two package units of the examined water from different production lots. Samples for research were collected at random. The study was conducted with the same samples in in which calcium and magnesium content was determined, which was the subject of the first part of the study. The content of sodium and potassium was determined using the emission technique (acetylene-air flame), with the use of atomic absorption spectrometer – ICE 3000 SERIES – THERMO

  7. Survey of trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) in retail samples of flavoured and bottled waters.

    Science.gov (United States)

    Barroso, M F; Ramos, S; Oliva-Teles, M T; Delerue-Matos, C; Sales, M G F; Oliveira, M B P P

    2009-01-01

    Concentrations of eleven trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) were measured in 39 (natural and flavoured) water samples. Determinations were performed using graphite furnace electrothermetry for almost all elements (Al, As, Cd, Cr, Co, Mn, Ni, Pb, and Si). For Se determination hydride generation was used, and cold vapour generation for Hg. These techniques were coupled to atomic absorption spectrophotometry. The trace element content of still or sparkling natural waters changed from brand to brand. Significant differences between natural still and natural sparkling waters (p differences between flavoured and natural waters. The concentration of each element was compared with the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. It was shown that flavoured waters generally increase the trace element content. The addition of preservatives and acidifying regulators had a significant influence on Mn, Co, As and Si contents (p difference in Mn, Co, Se and Si content.

  8. Developing a framework for audit quality management in audit firms

    Directory of Open Access Journals (Sweden)

    Darius Vaicekauskas, Jonas Mackevičius

    2014-02-01

    Full Text Available Over the last few decades audit quality has been investigated by many scholars, although it still hasn’t been properly conceptualized and lacks one common definition. This may be explained by the constant shifting of audit theory and practice, and the complexity of the audit service. The objective of the paper is to investigate the existing definitions of audit quality, identify its main elements and provide a framework for audit quality management in audit firms. The main contribution of the paper is a developed framework for audit quality management, covering both main stakeholders of auditing triangular relationships: third-party users, as well as audit clients. Due to a slump in audit prices, complex competition and a high degree of homogeneity, the authors of the paper focus not only on external users’ perceptions, as the existing large body of literature does, but also stress audit clients’ need for satisfaction in the comprehensive framework. The framework covers various audit firms and audit engagement team factors affecting audit quality and leading to quality audit outputs: an accurate and reliable auditor report and a value adding management letter. Based on the framework presented, recommendations for future audit quality research are provided

  9. Audit culture revisited

    DEFF Research Database (Denmark)

    Shore, Cris; Wright, Susan

    2015-01-01

    The spread of the rationality and techniques of financial accounting into new systems for measuring, ranking and auditing performance represents one of the most important and defining features of contemporary governance. Audit procedures are redefining accountability, transparency, and good...... these new financialized techniques of governance, not least through the work of the ‘Big 4’ accountancy firms, and trace their impact across a number of different fields, from administration and the military to business corporations and universities. Following Strathern’s observation that audit is ‘where...... the financial and the moral meet’ we ask, what new kinds of ‘ethics of accountability’ does audit produce? We build on the work of Mitchell (1999), Trouillot (2001) and Merry (2011) to identify five ways in which the techniques and logics of financial accountancy have notable ‘audit effects...

  10. [The relationship between the infant nursing bottle caries and the feeding patterns, oral health behavior and parents' oral health information].

    Science.gov (United States)

    Zhong, Zhao-qi

    2009-12-01

    To investigate the relationship between the infant nursing bottle caries in city community and the feeding patterns, oral health behavior, parents' oral health information, and to provide scientific basis for future infant nursing bottle caries prevention. Three hundred infants aged 6, 7, 12, 18 months in April 2009 in Bai Guan Street Community Hospital Shangyu City were enrolled in this study, nursing bottle caries were examined and recorded. Questionnaires on infant basic data, feeding patterns, oral health behavior, parents' oral health information were asked and recorded in these 300 parents. The relationship was analyzed between the infant nursing bottle caries and the questionnaires by Chi-square test with the SPSS14.0 software package. The infant nursing bottle caries correlated obviously with the habit of sleeping with the nursing bottle or mammary papilla in mouth, and did not correlate with the breast or artificial feeding patterns. The occurrence rate of infant nursing bottle caries was significantly lower in the infants with oral health behavior than those without oral health behavior. After feeding food, more parents feed the infants with little plain boiled water than clean the infant oral cavity with finger cap wet carbasus. 56.7% of parents had no acknowledge of danger of infant nursing bottle caries. There is some correlation between the infant nursing bottle caries and the feeding patterns, oral health behavior, parents' oral health information.

  11. Internal audit consider the implications.

    Science.gov (United States)

    Baumgartner, Grant D; Hamilton, Angela

    2004-06-01

    Internal audit can not only allay external and internal concerns about appropriateness of business operations, but also help improve efficiency and the bottom line. To get an internal audit function under way, healthcare organizations need to obtain board buy-in, form an audit committee of the board, determine resources needed, perform a risk assessment, and develop an internal audit plan.

  12. Internal Auditing for School Districts.

    Science.gov (United States)

    Cuzzetto, Charles

    This book provides guidelines for conducting internal audits of school districts. The first five chapters provide an overview of internal auditing and describe techniques that can be used to improve or implement internal audits in school districts. They offer information on the definition and benefits of internal auditing, the role of internal…

  13. Leaving a joint audit system

    DEFF Research Database (Denmark)

    Holm, Claus; Thinggaard, Frank

    2014-01-01

    Purpose: The authors aim to exploit a natural experment in which voluntary replace mandatory joint audits for Danish listed companies and analyse audit fee implications of using one or two audit firms. Design/methodology/approach: Regression analysis is used. The authors apply both a core audit f...

  14. Internal Auditing for School Districts.

    Science.gov (United States)

    Cuzzetto, Charles

    This book provides guidelines for conducting internal audits of school districts. The first five chapters provide an overview of internal auditing and describe techniques that can be used to improve or implement internal audits in school districts. They offer information on the definition and benefits of internal auditing, the role of internal…

  15. Flow-injection spectrophotometric determination of bromate in bottled drinking water samples using chlorpromazine reagent and a liquid waveguide capillary cell.

    Science.gov (United States)

    Tóth, Ildikó V; Santos, Inês C; Azevedo, Cláudia F M; Fernandes, Jorge F S; Páscoa, Ricardo N M J; Mesquita, Raquel B R; Rangel, António O S S

    2013-01-01

    In this work, aiming to develop a simple, inexpensive method for the determination of low bromate levels in water samples, a liquid waveguide capillary cell (LWCC) was coupled to a FIA system. The long optical path (100 cm) of the LWCC was used to improve the sensitivity and the limit of detection without resorting to any off-line or in-line preconcentration processes. The spectrophotometric determination was based on the oxidation of chlorpromazine by bromate in an acidic medium, resulting in the formation of a colored radical product. Sulfamic acid was added to the reagent for minimizing the interference of nitrite, and a chelating ion exchange resin was used to remove major cationic interferences. The developed system allowed the determination of bromate within the range between 1 - 20 μg L(-1) with a detection limit of 0.2 μg L(-1).

  16. Inactivation by solar photo-Fenton in pet bottles of wild enteric bacteria of natural well water: Absence of re-growth after one week of subsequent storage

    OpenAIRE

    Ndounla, J.; Spuhler, D.; Kenfack, S.; Wethe, J.; Pulgarin, C

    2013-01-01

    Iron photo-assisted inactivation of wild enteric bacteria (total coliforms/E. coil and Salmonella spp.) was carried out in water from the Sahelian wells having different pH (W1:4.9 and W2: 6.3) and a natural iron content of 0.07 mg/L We evaluate the efficiency of the disinfection on different systems containing both or only one Fenton reagent (H2O2/Fe-2.): (i) H2O2/Fe2+/hv, (ii) Fe2+/hv, (iii) H2O2/hv, and (iv) only light irradiation (hv) at lab and field scale. Generally, 0.6 mg/L of Fe2+ an...

  17. Audit culture revisited

    DEFF Research Database (Denmark)

    Shore, Cris; Wright, Susan

    2015-01-01

    The spread of the rationality and techniques of financial accounting into new systems for measuring, ranking and auditing performance represents one of the most important and defining features of contemporary governance. Audit procedures are redefining accountability, transparency, and good...... governance and reshaping the way organisations and individuals have to operate. They also undermine professional autonomy and have unanticipated and dysfunctional consequences. Taking up the concept of ‘audit culture’ as an analytical framework, we examine the origins, spread and rationality driving...... these new financialized techniques of governance, not least through the work of the ‘Big 4’ accountancy firms, and trace their impact across a number of different fields, from administration and the military to business corporations and universities. Following Strathern’s observation that audit is ‘where...

  18. Audit culture revisited

    DEFF Research Database (Denmark)

    Shore, Cris; Wright, Susan

    2015-01-01

    The spread of the rationality and techniques of financial accounting into new systems for measuring, ranking and auditing performance represents one of the most important and defining features of contemporary governance. Audit procedures are redefining accountability, transparency, and good...... governance and reshaping the way organisations and individuals have to operate. They also undermine professional autonomy and have unanticipated and dysfunctional consequences. Taking up the concept of ‘audit culture’ as an analytical framework, we examine the origins, spread and rationality driving...... these new financialized techniques of governance, not least through the work of the ‘Big 4’ accountancy firms, and trace their impact across a number of different fields, from administration and the military to business corporations and universities. Following Strathern’s observation that audit is ‘where...

  19. TTVP Audit Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains information on retail market spot check audit purchases. Data are available from May 2001 to present with new data appended annually....

  20. Recovery Audit Program

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Recovery Audit Programs mission is to identify and correct Medicare improper payments through the efficient detection and collection of overpayments made on...

  1. Internal auditing in hospitals.

    Science.gov (United States)

    Edwards, Don; Kusel, Jim; Oxner, Tom

    2003-01-01

    The authors analyzed two national surveys to determine answers for two basic questions: How do the roles of internal auditors compare with those of their counterparts in other industries and to what extent over the past 6 years have the activities of internal auditors changed? Internal auditors in hospitals allocate their time primarily to financial/compliance and operational types of audits, as do their counterparts. The current trend is toward more operational types of audits. In the early years of employment, staff turnover in hospitals is significantly higher than in all combined industries, often leading to internal auditors' filling other positions in the organization. Hospital staff salaries are higher than are salaries in other industries combined. Staff composition continues to reflect the growing presence of women in the field. The majority of internal auditing directors believe that their salaries are fair, would recommend internal auditing as a career position, and are treated as valued consultants in the organization.

  2. Spreadsheet Auditing Software

    OpenAIRE

    2010-01-01

    It is now widely accepted that errors in spreadsheets are both common and potentially dangerous. Further research has taken place to investigate how frequently these errors occur, what impact they have, how the risk of spreadsheet errors can be reduced by following spreadsheet design guidelines and methodologies, and how effective auditing of a spreadsheet is in the detection of these errors. However, little research exists to establish the usefulness of software tools in the auditing of spre...

  3. Oneida Tribe Energy Audits

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Ray [Energy Controls Manager; Schubert, Eugene [Policy Analyst

    2014-08-15

    Project funding energy audits of 44 Tribally owned buildings operated by the Oneida Tribe of Indians of WI. Buildings were selected for their size, age, or known energy concerns and total over 1 million square feet. Audits include feasibility studies, lists of energy improvement opportunities, and a strategic energy plan to address cost effective ways to save energy via energy efficiency upgrades over the short and long term.

  4. Joint audits - benefit or burden?

    DEFF Research Database (Denmark)

    Holm, Claus; Thinggaard, Frank

    In this paper we examine whether there are perceived and observed benefits or burdens from using two audit firms instead of one. In 2005 the mandatory joint audit requirement was abolished in Denmark. This provides a unique setting for studying the consequences and implications of going from...... a joint audit regime to a single auditor/voluntary joint audit regime. The dataset used in this paper has been collected for the full population of non-financial Danish companies listed on the Copenhagen Stock Exchange (CSE) in the years 2004 and 2005. We find that a majority of firms perceive joint...... audits to be a net burden. Furthermore, based on DeAngelo's (1981) initial audit pricing model and legislators' claim that joint audits are an unnecessary economic burden to the companies we predict and find discounts (of around 25%) in audit fees in companies that change to single audits. The primary...

  5. Computer Assisted Audit Techniques

    Directory of Open Access Journals (Sweden)

    Eugenia Iancu

    2007-01-01

    Full Text Available From the modern point of view, audit takes intoaccount especially the information systems representingmainly the examination performed by a professional asregards the manner for developing an activity by means ofcomparing it to the quality criteria specific to this activity.Having as reference point this very general definition ofauditing, it must be emphasized that the best known segmentof auditing is the financial audit that had a parallel evolutionto the accountancy one.The present day phase of developing the financial audithas as main trait the internationalization of the accountantprofessional. World wide there are multinational companiesthat offer services in the financial auditing, taxing andconsultancy domain. The auditors, natural persons and auditcompanies, take part at the works of the national andinternational authorities for setting out norms in theaccountancy and auditing domain.The computer assisted audit techniques can be classified inseveral manners according to the approaches used by theauditor. The most well-known techniques are comprised inthe following categories: testing data techniques, integratedtest, parallel simulation, revising the program logics,programs developed upon request, generalized auditsoftware, utility programs and expert systems.

  6. Auditing of environmental management system

    Directory of Open Access Journals (Sweden)

    Čuchranová Katarína

    2001-12-01

    Full Text Available Environmental auditing has estabilished itself as a valueable instrument to verify and help to improve the environmental performance.Organizations of all kinds may have a need to demonstrate the environmental responsibility. The concept of environmental management systems and the associated practice of environmental auditing have been advanced as one way to satisfy this need.These system are intended to help an organization to establish and continue to meet its environmental policies, objectives, standards and other requirements.Environmental auditing is a systematic and documented verification process of objectively obtaining and evaluating audit evidence to determine whether an organizations environmental management system conforms to the environmental management system audit criteria set by the organization and for the communication of the results of this process to the management.The following article intercepts all parts of preparation environmental auditing.The audit programme and procedures should cover the activities and areas to be considered in audits, the frequency of audits, the responsibilities associated with managing and conducting audits, the communication of audit results, auditor competence, and how audits will be conducted.The International Standard ISO 140011 estabilishes the audit procedures that determine conformance with EMS audit criteria.

  7. Manufacture Processing and Applications of Polyester Bottle%PET聚酯瓶的制造工艺与应用

    Institute of Scientific and Technical Information of China (English)

    潘焕玉

    2014-01-01

    PET聚酯具有良好的吹塑性,因此在瓶类包装上得到充分的推广。在耐热性上, PET聚酯瓶可分冷瓶和热瓶。本综述主要从原料选择、瓶坯加工、吹瓶过程三方面描述PET聚酯热瓶的制造工艺。此外,还列举PET聚酯瓶在饮用水、茶饮料、碳酸饮料、调味品、食用油、啤酒、医药、农药等八大生活日用品的包装应用以及PET聚酯瓶在各应用中的性能。%Due to the excellent blow molding property, polyester was widely used in bottle packing. Based on its thermal resistance, polyester could be divided into two different types of cool-type bottle and hot-type bottle. Cool-type bottle meant the bottle had no resistance to heat, and it was more appropriately utilized in normal atmospheric temperature. In contrast, hot-type bottle resisted heating to a certain extent. The manufacture processing of polyester bottle was introduced from three distinct aspects of selection of raw materials, manufacture of bottle embryo and procedure of blowing bottle respectively. In addition, eight different packing applications of polyester bottle for daily life necessities were clearly mentioned that was drinkable water, tea drinks, carbonic acid beverage, condiment, cooking oil, beer, medicine, and pesticide. Furthermore, kinds of properties of polyester bottle at each application were described.

  8. A pilot study comparing opaque, weighted bottles with conventional, clear bottles for infant feeding.

    Science.gov (United States)

    Ventura, Alison K; Pollack Golen, Rebecca

    2015-02-01

    It is hypothesized that the visual and weight cues afforded by bottle-feeding may lead mothers to overfeed in response to the amount of liquid in the bottle. The aim of the present pilot study was to test this hypothesis by comparing mothers' sensitivity and responsiveness to infant cues and infants' intakes when mothers use opaque, weighted bottles (that remove visual and weight cues) compared to conventional, clear bottles to feed their infants. We also tested the hypothesis that mothers' pressuring feeding style would moderate the effect of bottle type. Formula-feeding dyads (N = 25) visited our laboratory on two separate days. Mothers fed their infants from a clear bottle one day and an opaque, weighted bottle on the other; bottle-order was counterbalanced across the two days. Infant intake was assessed by weighing each bottle before and after the feeding. Maternal sensitivity and responsiveness to infant cues was objectively assessed using the Nursing Child Assessment Feeding Scale. Mothers were significantly more responsive to infant cues when they used opaque compared to clear bottles (p = .04). There was also a trend for infants to consume significantly less formula when fed from opaque compared to clear bottles (p = .08). Mothers' pressuring feeding style moderated the effect of bottle type on maternal responsiveness to infant cues (p = .02) and infant intake (p = .03). Specifically, mothers who reported higher levels of pressuring feeding were significantly more responsive to their infants' cues (p = .02) and fed their infants significantly less formula when using opaque versus clear bottles (p = .01); no differences were seen for mothers who reported lower levels of pressuring feeding. This study highlights a simple, yet effective intervention for improving the bottle-feeding practices of mothers who have pressuring feeding styles.

  9. Detection and analysie on commercial bottled drinking water hygiene of Zhengzhou city in 2009%郑州市2009年市售瓶装饮用水卫生检测结果分析

    Institute of Scientific and Technical Information of China (English)

    张威娜; 李博; 冯亚静; 程学敏; 段丽菊

    2012-01-01

    目的 监测和分析郑州市2009年度市售瓶装饮用水卫生状况及存在的问题,为加强卫生监督管理提供依据.方法 随机抽取市场销售的瓶装饮用水1124份,按GB19298-2003、GB/T8538-2008、GB17323-1998和GB/T4789.21-2003规定的方法,检测感宫、微生物学和理化指标.结果 1124份样品总合格率为74.0%.其中第1、2、3和4季度合格率分别为83.1%、57.6%、64.8%和87.9%,各季度合格率之间差异有统计学意义(x2=60.2,P< 0.01).第2、3季度(夏秋季)与第1、4季度(春冬季)比较合格率明显偏低,其差异有统计学意义(x2=54.2,P< 0.01).感官指标合格率100%.微生物指标中以菌落总数、大肠菌群合格率较低,分别为58.6%、62.1%.理化指标中,亚硝酸盐、高锰酸钾消耗量合格率分别为98.0%、98.9%.铅、砷、铜均未检出.纯净水电导率合格率为97.6%.纯净水抽检样品合格率为65.0%,矿泉水抽检样品合格率为86.50%,两者比较差异有统计学意义(x2=29.4,P< 0.01).结论 市售瓶装饮用水尚存在较大卫生质量问题,以菌落总数、大肠菌群超标为主.%OBJECTIVE To detect and analyse sanitation and problems of commercial bottled drinking water of Zhengzhou city in 2009 and to provide reference for strengthening supervision of hygiene. METHODS 1 124 samples from market were taken randomly and sensory, animalcule, physical and chemical indexes were detected according to national standards (GB17324-2004, GB/T8538-2008, GB17323-1998 and GB/T4789.21-2003). RESULTS The total qualified rate of 1 124 samples was 74.0%. Qualified rates of the first, second, third and fourth quarter were 83.1%, 57.6%, 64.8% and 87.9% respectively and there were significant differences among qualified rates of 4 quarters (χ2 was 60.2, P < 0.01). Qualified rates of the second and third quarter (summer and autumn) were lower than that of the first and forth quarter (spring and winter) and there were

  10. 20 CFR 656.20 - Audit procedures.

    Science.gov (United States)

    2010-04-01

    ... application is selected for audit, the Certifying Officer shall issue an audit letter. The audit letter will... the date of the audit letter, by which the required documentation must be submitted; and (3) Advise...

  11. Communication of Audit Risk to Students.

    Science.gov (United States)

    Alderman, C. Wayne; Thompson, James H.

    1986-01-01

    This article focuses on audit risk by examining it in terms of its components: inherent risk, control risk, and detection risk. Discusses applying audit risk, a definition of audit risk, and components of audit risk. (CT)

  12. Plastic bottle oscillator as an on-off-type oscillator: Experiments, modeling, and stability analyses of single and coupled systems

    Science.gov (United States)

    Kohira, Masahiro I.; Kitahata, Hiroyuki; Magome, Nobuyuki; Yoshikawa, Kenichi

    2012-02-01

    An oscillatory system called a plastic bottle oscillator is studied, in which the downflow of water and upflow of air alternate periodically in an upside-down plastic bottle containing water. It is demonstrated that a coupled two-bottle system exhibits in- and antiphase synchronization according to the nature of coupling. A simple ordinary differential equation is deduced to interpret the characteristics of a single oscillator. This model is also extended to coupled oscillators, and the model reproduces the essential features of the experimental observations.

  13. Energy audits at 48 hospitals

    Science.gov (United States)

    Hirst, E.

    1981-11-01

    Staff at the Oak Ridge Associated Universities (ORAU) conducted energy audits at 48 hospitals in four states (New York, Pennsylvania, Virginia, Tennessee) between 1978 and 1980. Staff at the Oak Ridge National Laboratory (ORNL) and ORAU developed and organized a computerized data base containing information from these audits. This paper describes the ORAU audit process; summarizes the data collected from these audits on hospital characteristics annual energy use, and the audit recommendations; and analyzes the audit data in terms of cost effectiveness, type of recommendations, and the relationship between potential energy saving and characteristics of the individual hospital.

  14. Concentração de flúor em águas engarrafadas comercializadas no município de São Paulo Fluoride concentration in bottled water on the market in the municipality of São Paulo

    Directory of Open Access Journals (Sweden)

    Roberto Henrique da Costa Grec

    2008-02-01

    Full Text Available O objetivo do estudo foi avaliar a concentração de flúor na água engarrafada comercializada, comparando-a aos valores impressos no rótulo da embalagem. Foram coletadas 229 amostras de água das 35 marcas disponíveis em diversos supermercados, mercearias e lanchonetes de grande circulação nas diferentes regiões do município de São Paulo, em 2006. A concentração de flúor foi determinada por análise em duplicata, utilizando o eletrodo íon-específico. A concentração de flúor variou entre 0,01 e 2,04 mg/l, com diferenças significantes entre os valores estipulados nos rótulos e os encontrados com a análise. Esses resultados reforçam a importância do controle dos níveis de flúor na água engarrafada por parte da vigilância sanitária.The objective of the study was to evaluate the fluoride concentration in bottled water available on the market, in comparison with the values printed on the bottle label. Two hundred and twenty-nine water samples were collected from 35 brands available in several supermarkets, grocery stores and snack bars with high turnover in different regions of the municipality of São Paulo, Southeastern Brazil, in 2006. Fluoride concentrations were determined by duplicate analysis using an ion-specific electrode. The fluoride concentrations ranged from 0.01 to 2.04 mg/l, with significant differences between the values stipulated on labels and those found in the analyses. These results emphasize the importance of controls over fluoride levels in bottled water enforced by the sanitary surveillance agency.

  15. Baby bottle steam sterilizers for disinfecting home nebulizers inoculated with non-tuberculous mycobacteria.

    Science.gov (United States)

    Towle, D; Callan, D A; Lamprea, C; Murray, T S

    2016-03-01

    Non-tuberculous mycobacteria (NTMb), present in environmental water sources, can contribute to respiratory infection in patients with chronic pulmonary disease. Contaminated nebulizers are a potential source of respiratory infection. Treatment with baby bottle steam sterilizers disinfects home nebulizers inoculated with bacterial pathogens but whether this method works for disinfection of NTMb is unclear. Baby bottle steam sterilization was compared with vigorous water washing for disinfecting home nebulizers inoculated with NTMb mixed with cystic fibrosis sputum. No NTMb was recovered from any nebulizers after steam treatment whereas viable NTMb grew after water washing, demonstrating that steam sterilization effectively disinfects NTMb-inoculated nebulizers.

  16. Audit result and its users

    Directory of Open Access Journals (Sweden)

    Shalimova Nataliya S.

    2014-01-01

    Full Text Available The article identifies essence of the “audit result” and “users of audit result” notions and characteristics of the key audit results user. It shows that in order to give a wide characteristic of users it is expedient to unite all objects, which could be used (audit report, fact of refusal to conduct audit and information that is submitted to managers in the process of audit with the term “audit result” and classify it depending on the terms of submission by final and intermediate result. The article offers to define audit results user as a person, persons or category of persons for whom the auditor prepares the audit report and, in cases, envisaged by international standards of the audit and domestic legislative and regulatory acts, provides other additional information concerning audit issues. In order to identify the key audit results user the article distributes all audit tasks into two groups depending on possibilities of identification of users. The article proves that the key user should be identified especially in cases of a mandatory audit and this process should go in interconnection with the mechanism of allocation of a key user of financial reports. It offers to consider external users with direct financial interests, who cannot request economic subjects directly to provide information and who should rely on general financial reports and audit report when receiving significant portion of information they need, as the key user. The article makes proposals on specification of the categorical mechanism in the sphere of audit, which are the basis for audit quality assessment, identification of possibilities and conditions of appearance of the necessary and sufficient trust to the auditor opinion.

  17. 10 CFR 603.1295 - Periodic audit.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Periodic audit. 603.1295 Section 603.1295 Energy... Used in this Part § 603.1295 Periodic audit. An audit of a participant, performed at an agreed-upon... an audit may cover. A periodic audit of a participant differs from an award-specific audit of...

  18. 27 CFR 24.308 - Bottled or packed wine record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond shall...

  19. Decentralization Calls for Internal Audits.

    Science.gov (United States)

    DiCello, Jim

    1995-01-01

    Outlines internal-auditing strategies necessitated by decentralization. Describes the following areas of concern: the student activities account, student attendance, and funding delegated to the site level. Guidelines for conducting an internal audit are also included. (LMI)

  20. Decentralization Calls for Internal Audits.

    Science.gov (United States)

    DiCello, Jim

    1995-01-01

    Outlines internal-auditing strategies necessitated by decentralization. Describes the following areas of concern: the student activities account, student attendance, and funding delegated to the site level. Guidelines for conducting an internal audit are also included. (LMI)

  1. 胸腔闭式引流一次性水封瓶更换时间与胸腔感染的相关性研究%Closed Thoracic Drainage Water-sealed Bottle Replacement Time and Correlation Study of Pleural Infection

    Institute of Scientific and Technical Information of China (English)

    刘霞; 李维芹

    2013-01-01

    Objective:To investigate the relation between the replacing time of water- sealed bottle and the thoracic cavity infection,to provide reference for clinical nursing.Methods:280 cases with closed thoracic drainage were divided in to 4 groups,to replace it every day (group A),to replace it every 3 days (group B),to replace it every week (group C),the use of more than 1 weeks to extrication (group D),four groups of patients with the positive rate of bacterial culture were compared analysis.Results:Four groups of patients with pleural effusion and pleural drainage pipe the results of bacterial culture and water-sealed bottle liquid culture results compare difference not to have statistical significance (P>0.05).Conclusion:It would not increase the risk of thoracic cavity infection and bacterium reproduction in water-sealed bottle to replace the bottle once a week for those patients requiring chest tube placement and ongoing more than a week,while asepsis was strictly implemented.%目的::探讨胸腔闭式引流一次性水封瓶更换时间与胸腔感染的相关性,为临床护理提供参考依据。方法:选取本院收治的行胸腔闭式引流术患者280例,按照随机原则分为四组,即每天更换(A组)、每3天更换(B组)、每周更换(C组)、使用超过1周到拔管(D组),对四组患者细菌培养的阳性率进行比较分析。结果:四组患者在胸腔积液与胸腔引流管细菌培养结果以及一次性水封瓶中液体培养结果方面比较差异无统计学意义(P>0.05)。结论:对于行胸腔闭式引流患者,一次性水封瓶每周更换1次并不会增加患者胸腔内感染的几率。

  2. Internal Audit and Risk Management

    OpenAIRE

    Constantin Nicolae Vasile; Alexandru Georgiana

    2011-01-01

    Internal audit and risk management have the same goal: the control of risk. There are various roles for the internal audit in respect of risk management. The main limitations of internal audit in respect of risk management regards assuming risk management tasks. One of the main issues regarding risk management is to make sure that the key risks are taken into consideration and that the management and the board of the organization take action as needed. Internal audit could give advice to mana...

  3. Software Engineering Reviews and Audits

    CERN Document Server

    Summers, Boyd L

    2011-01-01

    Accurate software engineering reviews and audits have become essential to the success of software companies and military and aerospace programs. These reviews and audits define the framework and specific requirements for verifying software development efforts. Authored by an industry professional with three decades of experience, Software Engineering Reviews and Audits offers authoritative guidance for conducting and performing software first article inspections, and functional and physical configuration software audits. It prepares readers to answer common questions for conducting and perform

  4. Resonance in Bottles with Different Shapes

    Directory of Open Access Journals (Sweden)

    Amy Elliott

    2012-01-01

    Full Text Available The Helmholtz Resonance equation derived in the 1800’s describes the nature of resonance in narrow-necked vessels, known as Helmholtz Resonators. It is commonly accepted that when air is blown across the opening of a bottle, the resonance can be modeled by the Helmholtz equation. Resonance was studied in two differently shaped bottles as the volume of the air cavity was varied. It was found that resonance in one of the bottles was accurately modeled by the Helmholtz equation but not in the other.

  5. Internal Audit in Higher Education.

    Science.gov (United States)

    Holmes, Alison, Ed.; Brown, Sally, Ed.

    This book describes a range of examples of internal audit in higher education as part of a process of the exchange of good practice. The book recognizes well-established links with audit theory from other contexts and makes use of theoretical perspectives explored in the financial sector. The chapters are: (1) "Quality Audit Issues"…

  6. The ambiguous identity of auditing

    DEFF Research Database (Denmark)

    Lindeberg, Tobias

    2007-01-01

    This paper analyses the identity of auditing by comparing performance auditing to financial auditing and programme evaluation. Based on an analysis of textbooks, it is concluded that these evaluative practices are situated on a continuum. This implies that studies that rely on ‘audit’ as a label...

  7. The Ambiguous Identity of Auditing

    DEFF Research Database (Denmark)

    Lindeberg, Tobias Høygaard

    2007-01-01

    This paper analyses the identity of auditing by comparing performance auditing to financial auditing and programme evaluation. Based on an analysis of textbooks, it is concluded that these evaluative practices are situated on a continuum. This implies that studies that rely on ‘audit’ as a label...

  8. Internal Audit in Higher Education.

    Science.gov (United States)

    Holmes, Alison, Ed.; Brown, Sally, Ed.

    This book describes a range of examples of internal audit in higher education as part of a process of the exchange of good practice. The book recognizes well-established links with audit theory from other contexts and makes use of theoretical perspectives explored in the financial sector. The chapters are: (1) "Quality Audit Issues"…

  9. Internal Audit in Higher Education.

    Science.gov (United States)

    Holmes, Alison, Ed.; Brown, Sally, Ed.

    This book describes a range of examples of internal audit in higher education as part of a process of the exchange of good practice. The book recognizes well-established links with audit theory from other contexts and makes use of theoretical perspectives explored in the financial sector. The chapters are: (1) "Quality Audit Issues" (Sally Brown…

  10. Spreadsheet Auditing Software

    CERN Document Server

    Nixon, David

    2010-01-01

    It is now widely accepted that errors in spreadsheets are both common and potentially dangerous. Further research has taken place to investigate how frequently these errors occur, what impact they have, how the risk of spreadsheet errors can be reduced by following spreadsheet design guidelines and methodologies, and how effective auditing of a spreadsheet is in the detection of these errors. However, little research exists to establish the usefulness of software tools in the auditing of spreadsheets. This paper documents and tests office software tools designed to assist in the audit of spreadsheets. The test was designed to identify the success of software tools in detecting different types of errors, to identify how the software tools assist the auditor and to determine the usefulness of the tools.

  11. Proof Auditing Formalised Mathematics

    Directory of Open Access Journals (Sweden)

    Mark Miles Adams

    2016-01-01

    Full Text Available The first three formalisations of major mathematical proofs have heralded a new age in formalised mathematics, establishing that informal proofs at the limits of what can be understood by humans can be checked by machine. However, formalisation itself can be subject to error, and yet there is currently no accepted process in checking, or even much concern that such checks have not been performed. In this paper, we motivate why we should be concerned about correctness, and argue the need for proof auditing, to rigorously and independently check a formalisation. We discuss the issues involved in performing an audit, and propose an effective and efficient auditing process. Throughout we use the Flyspeck Project, that formalises the Kepler Conjecture proof, to illustrate our point.

  12. Auditing of chromatographic data.

    Science.gov (United States)

    Mabie, J T

    1998-01-01

    During a data audit, it is important to ensure that there is clear documentation and an audit trail. The Quality Assurance Unit should review all areas, including the laboratory, during the conduct of the sample analyses. The analytical methodology that is developed should be documented prior to sample analyses. This is an important document for the auditor, as it is the instrumental piece used by the laboratory personnel to maintain integrity throughout the process. It is expected that this document will give insight into the sample analysis, run controls, run sequencing, instrument parameters, and acceptance criteria for the samples. The sample analysis and all supporting documentation should be audited in conjunction with this written analytical method and any supporting Standard Operating Procedures to ensure the quality and integrity of the data.

  13. GLOBEC NEP Rosette Bottle Data (2002)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GLOBEC (GLOBal Ocean ECosystems Dynamics) NEP (Northeast Pacific) Rosette Bottle Data from New Horizon Cruise (NH0207: 1-19 August 2002). Notes: Physical data...

  14. Gas Experiments with Plastic Soda Bottles.

    Science.gov (United States)

    Kavanah, Patrick; Zipp, Arden P.

    1998-01-01

    Describes the use of an inexpensive device consisting of a plastic soda bottle and a modified plastic cap in a range of demonstrations and experimental activities having to do with the behavior of gases. (Author/WRM)

  15. Environmental audit of the Savannah River Ecology Laboratory (SREL)

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This report documents the results of the environmental audit conducted at the Savannah River Ecology Laboratory (SREL) at the Savannah River Site (SRS), principally in Aiken and Barnwell Counties, South Carolina. The audit was conducted by the US Department of Energy`s (DOE`s), Office of Environmental Audit (EH-24), beginning September 13, 1993, and ending September 23, 1993. The scope of the audit at SREL was comprehensive, addressing environmental activities in the technical areas of air; surface water/drinking water; groundwater/soil, sediment, and biota; waste management; toxic and chemical materials; inactive Waste sites; radiation; quality assurance; and environmental management. Specifically assessed was the compliance of SREL operations and activities with Federal, state, and local regulations; DOE Orders; and best management practices.

  16. Characteristics of bacterial and fungal growth in plastic bottled beverages under a consuming condition model.

    Science.gov (United States)

    Watanabe, Maiko; Ohnishi, Takahiro; Araki, Emiko; Kanda, Takashi; Tomita, Atsuko; Ozawa, Kazuhiro; Goto, Keiichi; Sugiyama, Kanji; Konuma, Hirotaka; Hara-Kudo, Yukiko

    2014-01-01

    Microbial contamination in unfinished beverages can occur when drinking directly from the bottle. Various microorganisms, including foodborne pathogens, are able to grow in these beverages at room temperature or in a refrigerator. In this study, we elucidated the characteristics of microorganism growth in bottled beverages under consuming condition models. Furthermore, we provide insight into the safety of partially consumed bottled beverages with respect to food hygiene. We inoculated microorganisms, including foodborne pathogens, into various plastic bottled beverages and analysed the dynamic growth of microorganisms as well as bacterial toxin production in the beverages. Eight bottled beverage types were tested in this study, namely green tea, apple juice drink, tomato juice, carbonated drink, sport drink, coffee with milk, isotonic water and mineral water, and in these beverages several microorganism types were used: nine bacteria including three toxin producers, three yeasts, and five moulds. Following inoculation, the bottles were incubated at 35°C for 48 h for bacteria, 25°C for 48 h for yeasts, and 25°C for 28 days for moulds. During the incubation period, the number of bacteria and yeasts and visible changes in mould-growth were determined over time. Our results indicated that combinations of the beverage types and microorganism species correlated with the degree of growth. Regarding factors that affect the growth and toxin-productivity of microorganisms in beverages, it is speculated that the pH, static/shaking culture, temperature, additives, or ingredients, such as carbon dioxide or organic matter (especially of plant origin), may be important for microorganism growth in beverages. Our results suggest that various types of unfinished beverages have microorganism growth and can include food borne pathogens and bacterial toxins. Therefore, our results indicate that in terms of food hygiene it is necessary to consume beverages immediately after opening

  17. Emergency Disinfection of Drinking Water

    Science.gov (United States)

    How to boil and disinfect water to kill most disease-causing microorganisms during emergency situations where regular water service has been interrupted and local authorities recommend using only bottled water, boiled water, or disinfected water.

  18. THE AUDIT OF RECEPTION PROCESS

    Directory of Open Access Journals (Sweden)

    Dorina MOCUŢA

    2013-01-01

    Full Text Available The object of study case is to analyze the quality of the logistics department, focusing on the audit process. Purpose of this paper is to present the advantages resulting from the systematic audit processes and methods of analysis and improvement of nonconformities found. The case study is realised at SC Miele Tehnica SRL Brasov, twelfth production line, and the fourth from outside Germany. The specific objectives are: clarifying the concept of audit quality, emphasizing requirements ISO 19011:2003 "Guidelines for auditing quality management systems and / or environment" on audits; cchieving quality audit and performance analysis; improved process performance reception materials; compliance with legislation and auditing standards applicable in EU and Romania.

  19. Mongolia : Accounting and Auditing

    OpenAIRE

    2008-01-01

    This report provides an assessment of corporate sector accounting, financial reporting, and auditing requirements and practices within the enterprise and financial sectors in Mongolia. For purposes of this report, the corporate sector includes all private sector and state-owned enterprises. The report uses International Financial Reporting Standards (IFRS) and International Standards on Au...

  20. Conducting a Technology Audit

    Science.gov (United States)

    Flaherty, William

    2011-01-01

    Technology is a critical component in the success of any high-functioning school district, thus it is important that education leaders should examine it closely. Simply put, the purpose of a technology audit is to assess the effectiveness of the technology for administrative or instructional use. Rogers Public Schools in Rogers, Arkansas, recently…

  1. Audit Maturity Model

    Directory of Open Access Journals (Sweden)

    Bhattacharya Uttam

    2014-01-01

    Full Text Available Today it is crucial for organizations to pay even greater attention on quality management as the importance of this function in achieving ultimate business objectives is increasingly becoming clearer. Importance of the Quality Management (QM Function in achieving basic need by ensuring compliance with Capability Maturity Model Integrated (CMMI / International Organization for Standardization (ISO is a basic demand from business nowadays. However, QM Function and its processes need to be made much more mature to prevent delivery outages and to achieve business excellence through their review and auditing capability. Many organizations now face challenges in determining the maturity of the QM group along with the service offered by them and the right way to elevate the maturity of the same. The objective of this whitepaper is to propose a new model –the Audit Maturity Model (AMM which will provide organizations with a measure of their maturity in quality management in the perspective of auditing, along with recommendations for preventing delivery outage, and identifying risk to achieve business excellence. This will enable organizations to assess QM maturity higher than basic hygiene and will also help them to identify gaps and to take corrective actions for achieving higher maturity levels. Hence the objective is to envisage a new auditing model as a part of organisation quality management function which can be a guide for them to achieve higher level of maturity and ultimately help to achieve delivery and business excellence.

  2. Auditing with incomplete logs

    NARCIS (Netherlands)

    Mian, Umbreen Sabir; Hartog, den Jerry; Etalle, Sandro; Zannone, Nicola

    2015-01-01

    The protection of sensitive information is of utmost importance for organizations. The complexity and dynamism of modern businesses are forcing a re-think of traditional protection mechanisms. In particular, a priori policy en-forcement mechanisms are often complemented with auditing mechanisms that

  3. From Auditing to Editing.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    Clarity in communication is important for workers in the General Accounting Office since much of the auditing work must be committed to paper if Congress, government officials and employees, or the public are to benefit. As a result an extensive writing improvement program was launched and this booklet written. Part 1 covers basic communication…

  4. Harmonisation of Audit Practice

    DEFF Research Database (Denmark)

    Sormunen, Nina; Klarskov Jeppesen, Kim; Sundgren, Stefan

    2013-01-01

    The study uses a sample of 2,941 bankrupt firms from Denmark, Finland, Norway and Sweden in the period 2007 to 2011, and investigates the harmonisation of audit behaviour in terms of going-concern reporting. Even though the Nordic countries have similar legal systems and, for all practical purposes...

  5. FEATURES ROAD SAFETY AUDIT

    Directory of Open Access Journals (Sweden)

    L. Abramova

    2015-07-01

    Full Text Available Development of the road network, increasing motorization of the population significantly increase the risk of accidents. Experts in the field of traffic are developing methods to reduce the probability of accidents. The ways of solving the problems of road safety audit at various stages of the «life» of roads are considered.

  6. Information Systems Security Audit

    Directory of Open Access Journals (Sweden)

    Gheorghe Popescu

    2007-12-01

    Full Text Available The article covers:Defining an information system; benefits obtained by introducing new information technologies; IT management;Defining prerequisites, analysis, design, implementation of IS; Information security management system; aspects regarding IS security policy; Conceptual model of a security system; Auditing information security systems and network infrastructure security.

  7. Information Systems Security Audit

    OpenAIRE

    Gheorghe Popescu; Veronica Adriana Popescu; Cristina Raluca Popescu

    2007-01-01

    The article covers:Defining an information system; benefits obtained by introducing new information technologies; IT management;Defining prerequisites, analysis, design, implementation of IS; Information security management system; aspects regarding IS security policy; Conceptual model of a security system; Auditing information security systems and network infrastructure security.

  8. Changing Methodologies in Financial Audit and Their Impact on Information Systems Audit

    National Research Council Canada - National Science Library

    Daniel Vîlsanoiu; Mihaela Serban

    2010-01-01

      This paper tries to provide a better understanding of the relation between financial audit and information systems audit and to assess the influence the change in financial audit methodologies had on IS audit...

  9. Keys to effective third-party process safety audits.

    Science.gov (United States)

    Birkmire, John C; Lay, James R; McMahon, Mona C

    2007-04-11

    The Occupational Safety and Health Administration's (OSHA's) Process Safety Management (PSM) regulation was promulgated in 1992. The U.S. Environmental Protection Agency's (EPA's) corresponding Risk Management Program (RMP) rule followed in 1996. Both programs include requirements for triennial compliance audits. Effective compliance audits are critical in identifying program weaknesses and ensuring the safety of facility personnel and the surrounding public. Large companies with corporate and facility health, safety, and environmental groups typically have the resources and experience to conduct audits internally, either through a corporate audit team or the sharing of personnel between multiple facilities. Small to medium sized businesses frequently do not have the expertise or the resources to perform compliance audits, and rely on third-party consultants to provide these services. This paper will discuss the observations of the authors in performing audits and working with PSM/RMP programs across a number of market sectors (e.g. chemical, petrochemical, pharmaceutical, food and beverage, water treatment), including effective practices, hurdles to successful implementation and execution of programs, and typical program shortcomings. The paper will also discuss steps to improve the audit process and increase effectiveness whether performed by a third party or internally.

  10. 25 CFR 571.12 - Audit standards.

    Science.gov (United States)

    2010-04-01

    ... INVESTIGATIONS Audits § 571.12 Audit standards. (a) Each tribe shall prepare comparative financial statements... completes an audit conforming to generally accepted auditing standards of the consolidated financial... consolidated financial statement as a whole and subjects the accompanying financial information to the auditing...

  11. The Informatics Audit - A Collaborative Process

    OpenAIRE

    Ciurea, Cristian

    2010-01-01

    The paper present issues regarding the audit in informatics field, the audit seen as a collaborative process and how the collaborative banking systems are audited. In this paper, the methodology and techniques for an effective audit process are described. There are highlighted some aspects regarding the assessment of collaborative systems and specific flows of informatics audit.

  12. The Informatics Audit - A Collaborative Process

    Directory of Open Access Journals (Sweden)

    Cristian CIUREA

    2010-01-01

    Full Text Available The paper present issues regarding the audit in informatics field, the audit seen as a collaborative process and how the collaborative banking systems are audited. In this paper, the methodology and techniques for an effective audit process are described. There are highlighted some aspects regarding the assessment of collaborative systems and specific flows of informatics audit.

  13. 32 CFR 37.1325 - Periodic audit.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Periodic audit. 37.1325 Section 37.1325 National... TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1325 Periodic audit. An audit of... awards. Appendix C to this part describes what such an audit may cover. A periodic audit of a...

  14. 30 CFR 735.22 - Audit.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Audit. 735.22 Section 735.22 Mineral Resources... ENFORCEMENT § 735.22 Audit. The agency shall arrange for an independent audit no less frequently than once..., Attachment P. The audits will be performed in accordance with the “Standards for Audit of...

  15. 11 CFR 9038.1 - Audit.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Audit. 9038.1 Section 9038.1 Federal Elections... EXAMINATIONS AND AUDITS § 9038.1 Audit. (a) General. (1) The Commission will conduct an audit of the qualified... primary matching funds. The audit may be conducted at any time after the date of the...

  16. 20 CFR 655.1312 - Audits.

    Science.gov (United States)

    2010-04-01

    ... application is selected for audit, the CO will issue an audit letter to the employer/applicant. The audit... fewer than 14 days and no more than 30 days from the date of the audit letter, by which the required documentation must be received by the CO; and (3) Advise that failure to comply with the audit process may...

  17. ARRAYS OF BOTTLES OF PLUTONIUM NITRATE SOLUTION

    Energy Technology Data Exchange (ETDEWEB)

    Margaret A. Marshall

    2012-09-01

    In October and November of 1981 thirteen approaches-to-critical were performed on a remote split table machine (RSTM) in the Critical Mass Laboratory of Pacific Northwest Laboratory (PNL) in Richland, Washington using planar arrays of polyethylene bottles filled with plutonium (Pu) nitrate solution. Arrays of up to sixteen bottles were used to measure the critical number of bottles and critical array spacing with a tight fitting Plexiglas® reflector on all sides of the arrays except the top. Some experiments used Plexiglas shells fitted around each bottles to determine the effect of moderation on criticality. Each bottle contained approximately 2.4 L of Pu(NO3)4 solution with a Pu content of 105 g Pu/L and a free acid molarity H+ of 5.1. The plutonium was of low 240Pu (2.9 wt.%) content. These experiments were sponsored by Rockwell Hanford Operations because of the lack of experimental data on the criticality of arrays of bottles of Pu solution such as might be found in storage and handling at the Purex Facility at Hanford. The results of these experiments were used “to provide benchmark data to validate calculational codes used in criticality safety assessments of [the] plant configurations” (Ref. 1). Data for this evaluation were collected from the published report (Ref. 1), the approach to critical logbook, the experimenter’s logbook, and communication with the primary experimenter, B. Michael Durst. Of the 13 experiments preformed 10 were evaluated. One of the experiments was not evaluated because it had been thrown out by the experimenter, one was not evaluated because it was a repeat of another experiment and the third was not evaluated because it reported the critical number of bottles as being greater than 25. Seven of the thirteen evaluated experiments were determined to be acceptable benchmark experiments. A similar experiment using uranyl nitrate was benchmarked as U233-SOL-THERM-014.

  18. Pengaruh Audit Tenure, Audit Switching, Audit Capacity Stress, Ukuran Perusahaan, dan Independensi Komite Audit Terhadap Kualitas Audit (Studi Empiris Pada Perusahaan Perbankan Yang Terdaftar Di BEI Tahun 2009 – 2013)

    OpenAIRE

    Sartika, Maya

    2015-01-01

    The objective of the research was to find out and to analyze some factors which influenced audit quality; i.e., audit tenure, audit switching, audit capacity stress, firm size, and the independence of audit committee. The research used secondary data. The population was all banking companies listed in BEI in the period of 2009-2013, and all of them were used as the samples. The independent variables were audit tenure, audit switching, audit capacity stress, firm size, the independence of ...

  19. PILLARS OF THE AUDIT ACTIVITY: MATERIALITY AND AUDIT RISK

    Directory of Open Access Journals (Sweden)

    ANA MARIA JOLDOŞ

    2010-01-01

    Full Text Available The purpose of this article is to present the issues of materiality andaudit risk within the activity of financial audit. The concepts of materiality and audit risk aredescribed from a theoretical perspective, providing approaches found within the national andinternational literature and within the specific legislation. A case study on the calculation ofmateriality and audit risk for an entity is presented in the last part of the article. Through thetheoretical approach and the case study, it was concluded that materiality has an importantrole in determining the type of report to be issued, that is why it can be considered helpful forthose involved in the audit process.

  20. Parents and nursing-bottle caries.

    Science.gov (United States)

    van Everdingen, T; Eijkman, M A; Hoogstraten, J

    1996-01-01

    In this study, the role of the parent in the phenomenon of nursing bottle caries is investigated. The main goal is to try to assess whether differences exist between parents and their children who suffer from nursing bottle caries and parents and children who are not affected by this form of dental decay. To this purpose, a questionnaire was constructed. Results showed that, in contrast to parents of non-caries children, more parents of caries children give a bottle straight from birth. These bottles more often contain sugared drinks and are given during daytime as well as at night. Children with caries and non-caries children differ in two respects: caries children on the whole are older and they have been sick more often than non-caries children. Finally, habit seems to be the major factor contributing to the use of a bottle to a relatively high age. Discussion focuses on the characterization of "typical" caries parents and their children and the implication for educational programs such a characterization could have.

  1. Ergonomics Designs of Aluminum Beverage Cans & Bottles

    Science.gov (United States)

    Han, Jing; Itoh, Ryouiti; Yamazaki, Koetsu; Nishiyama, Sadao; Shinguryo, Takuro

    2005-08-01

    This paper introduced the finite element analyses into the ergonomics designs to evaluate the human feelings numerically and objectively. Two design examples in developing aluminum beverage cans & bottles are presented. The first example describes a design of the tab of the can with better finger access. A simulation of finger pulling up the tab of the can has been performed and a pain in the finger has been evaluated by using the maximum value of the contact stress of a finger model. The finger access comparison of three kinds of tab ring shape designs showed that the finger access of the tab that may have a larger contact area with finger is better. The second example describes a design of rib-shape embossed bottles for hot vending. Analyses of tactile sensation of heat have been performed and the amount of heat transmitted from hot bottles to finger was used to present the hot touch feeling. Comparison results showed that the hot touch feeling of rib-shape embossed bottles is better than that of cylindrical bottles, and that the shape of the rib also influenced the hot touch feeling.

  2. Scientific Auditing Firms

    CERN Document Server

    Sarma, Gopal P

    2016-01-01

    The "crisis of reproducibility" has been a significant source of controversy, heated debate, and calls for reform to institutional science in recent years. As a long-term solution to address both the present crisis and future obstacles, I propose the creation of a new form of research organization whose purpose would be to conduct random audits of the scientific literature. I suggest that data analytics of a digitized scientific corpus may play a critical role in allowing broadly educated scientists to identify linchpin results to investigate in further detail across all disciplines. I argue that a simple "mock" trial run of a simplified auditing firm consisting of several researchers over a short time period would provide valuable insight into the feasibility of this proposal.

  3. Mobile Learning Applications Audit

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2010-01-01

    Full Text Available While mobile learning (m-learning applications have proven their value in educational activities, there is a need to measure their reliability, accessibility and further more their trustworthiness. Mobile devices are far more vulnerable then classic computers and present inconvenient interfaces due to their size, hardware limitations and their mobile connectivity. Mobile learning applications should be audited to determine if they should be trusted or not, while multimedia contents like automatic speech recognition (ASR can improve their accessibility. This article will start with a brief introduction on m-learning applications, then it will present the audit process for m-learning applications, it will iterate their specific security threats, it will define the ASR process, and it will elaborate how ASR can enhance accessibility of these types of applications.

  4. Disposal of post-consumer polyethylene terephthalate (PET) bottles: comparison of five disposal alternatives in the small island state of Mauritius using a life cycle assessment tool.

    Science.gov (United States)

    Foolmaun, Rajendra Kumar; Ramjeeawon, Toolseeram

    2012-01-01

    Used polyethylene terephthalate bottles (PET) dumped indiscriminately onto bare lands and water bodies constitute an eyesore. This problem is viewed as a serious impediment to the flourishing tourism industry in Mauritius. Currently, over 100 million PET bottles are generated annually and the only fully operational disposal route is through the sole sanitary landfill. There is no formal segregation of waste and therefore used PET bottles are disposed of commingled with domestic waste. Despite a satisfactory waste collection system, a considerable amount of used PET bottles unfortunately end up in water bodies and on bare lands. An appreciable amount of PET bottles is now being collected separately for flake production prior to export to South Africa. This paper investigated the environmental impact of five waste management scenarios (100% landfill; 100% incineration with energy recovery; 50% incineration and 50% landfill; 34% flake production and 66% landfill; 100% flake production) for used PET bottles in Mauritius. Comparison of the five scenarios was based on the life cycle assessment (LCA) methodology described in ISO 14040 and ISO 14044. SimaPro 7.1 software was used to analyse the data. Comparison of the five scenarios showed that the highest environmental impacts occurred when 100% of used PET bottles were sent to the landfill. The comparison also indicated that there were least impacts on the environment when all used PET bottles were incinerated with energy recovery.

  5. Assessment of paediatric clinical audit.

    LENUS (Irish Health Repository)

    Perrem, L M

    2012-02-01

    Consultant paediatricians in Ireland were surveyed to evaluate their perceptions of the hospital audit environment and assess their involvement in the audit process. Eighty nine (77%) replied of whom 66 (74%) had an audit department and 23 (26%) did not. Sixteen (18%) felt their hospital was well resourced for audit and 25 (28%) felt the culture was very positive but only 1 (1%) had protected time. For 61 (69%) consultants audit was very important with 38 (43%) being very actively involved in the process. The most frequent trigger for audit was non consultant hospital doctor (NCHD) career development, cited by 77 (87%). The new Professional Competence Scheme and the National Quality and Risk Management Standards will require the deficiencies identified in this survey be addressed.

  6. Mobile Learning Applications Audit

    OpenAIRE

    2010-01-01

    While mobile learning (m-learning) applications have proven their value in educational activities, there is a need to measure their reliability, accessibility and further more their trustworthiness. Mobile devices are far more vulnerable then classic computers and present inconvenient interfaces due to their size, hardware limitations and their mobile connectivity. Mobile learning applications should be audited to determine if they should be trusted or not, while multimedia contents like auto...

  7. Criteria for internal auditing.

    Science.gov (United States)

    Holder, W W; Clay, R J

    1979-01-01

    An effective, inclusive internal auditing endeavor should help assure hospital managements that (1) an adequate system of internal control exists to assure the safeguarding of assets and the reliability of data produced by the financial information system, (2) uneconomic operating practices are detected promptly so they can be remedied, and (3) program results and effectiveness levels are of sufficiently high quality to demonstrate managerial competence.

  8. Study on heat transfer coefficients during cooling of PET bottles for food beverages

    Science.gov (United States)

    Liga, Antonio; Montesanto, Salvatore; Mannella, Gianluca A.; La Carrubba, Vincenzo; Brucato, Valerio; Cammalleri, Marco

    2016-08-01

    The heat transfer properties of different cooling systems dealing with Poly-Ethylene-Terephthalate (PET) bottles were investigated. The heat transfer coefficient (Ug) was measured in various fluid dynamic conditions. Cooling media were either air or water. It was shown that heat transfer coefficients are strongly affected by fluid dynamics conditions, and range from 10 W/m2 K to nearly 400 W/m2 K. PET bottle thickness effect on Ug was shown to become relevant under faster fluid dynamics regimes.

  9. 7 CFR 4284.18 - Audit requirements.

    Science.gov (United States)

    2010-01-01

    ... Grant Programs § 4284.18 Audit requirements. Grantees must comply with the audit requirements of 7 CFR part 3052. The audit requirements apply to the years in which grant funds are received and years in...

  10. Trash + Creativity = Problem Solved: Award Winners Give Plastic Bottles Second Life

    Science.gov (United States)

    Tech Directions, 2007

    2007-01-01

    Judge Harry T. Roman, an electrical engineer and inventor, has selected the best of the crop in the 2006/2007 Tech Directions Inventors Award Competition. The challenge this year called on students to slow the filling of landfills by devising uses for discarded plastic water, juice, soda, and sports-drink bottles. Judge Roman noted "many common…

  11. Feeding Bottles Usage and the Prevalence of Childhood Allergy and Asthma

    DEFF Research Database (Denmark)

    Hsu, Nai-Yun; Wu, Pei-Chih; Bornehag, Carl-Gustaf

    2012-01-01

    infant formula or complementary foods, family history, parental educational levels, and smoking status, as well as the problem of indoor water damage. This study was the first to reveal the potential risk of using plastic consumer products such as feeding bottles on the reported health status......This study aimed to examine the association between the length of use of feeding bottles or pacifiers during childhood and the prevalence of respiratory and allergic morbidities. A large-scale questionnaire survey was performed in day care centers and kindergartens (with children's ages ranging...... from 2 to 7 years) in southern Taiwan, and a total of 14,862 questionnaires completed by parents were finally recruited for data analysis. Effects of using feeding bottles on children's wheezing/asthma (adjusted OR: 1.05, 95% CI 1.00-1.09), allergic rhinitis (adjusted OR: 1.04, 95% CI 1...

  12. Internal Audits of QMS (COTS) -

    Data.gov (United States)

    Department of Transportation — This is an internal audit workflow application used to automate business processes that support the AVS Quality Management System (QMS) and several Flight Standards...

  13. Joint audits - benefit or burden?

    DEFF Research Database (Denmark)

    Holm, Claus; Thinggaard, Frank

    In this paper we examine whether there are perceived and observed benefits or burdens from using two audit firms instead of one. In 2005 the mandatory joint audit requirement was abolished in Denmark. This provides a unique setting for studying the consequences and implications of going from...... a joint audit regime to a single auditor/voluntary joint audit regime. The dataset used in this paper has been collected for the full population of non-financial Danish companies listed on the Copenhagen Stock Exchange (CSE) in the years 2004 and 2005. We find that a majority of firms perceive joint...

  14. Buying and Caring for Baby Bottles and Nipples

    Science.gov (United States)

    ... and nipples. References American Academy of Pediatrics. Practical Bottle Feeding Tips. Available at: www.healthychildren.org/English/ages-stages/baby/feeding-nutrition/Pages/Practical-Bottle-Feeding-Tips.aspx. Accessed April 7, 2015. Stettler N, ...

  15. Nurses' participation in audit: a regional study

    OpenAIRE

    1998-01-01

    OBJECTIVES: To find out to what extent nurses were perceived to be participating in audit, to identify factors thought to impede their involvement, and to assess progress towards multidisciplinary audit. RESEARCH DESIGN: Qualitative. METHODS: Focus groups and interviews. PARTICIPANTS: Chairs of audit groups and audit support staff in hospital, community and primary health care and audit leads in health authorities in the North West Region. RESULTS: In total 99 audit le...

  16. Experimental and modeling analysis of asymmetrical on-off oscillation in coupled non-identical inverted bottle oscillators

    Science.gov (United States)

    Jia, Ji; Shangguan, Zhichun; Li, Haihong; Wu, Ye; Liu, Weiqing; Xiao, Jinghua; Kurths, Jürgen

    2016-11-01

    Upside-down bottles containing water which are common in our daily life exhibit rich vibration dynamics. Rich dynamic regimes are observed in bottle oscillators by directly measuring the pressure difference between inside and outside of a bottle with the aid of pressure sensors. We observe experimentally that an asymmetrical oscillation process between the outflow of water and the inflow of air is formed in a single bottle oscillator and, in addition, a kind of 2:1 frequency synchronization occurs in a coupled system of two non-identical bottle oscillators. The peak values of the oscillation of pressure differences between inside and outside of the bottle decease as the height of the liquid surface steps down, while the oscillation period increases gradually. The theoretical model of the oscillator is amended to understand the regimes in the experiment by introducing time-dependent parameters related to the asymmetrical oscillation processes. Our numerical results based on the model fit well with the experimental ones.

  17. Audit Database and Information Tracking System

    Data.gov (United States)

    Social Security Administration — This database contains information about Social Security Administration audits regarding SSA agency performance and compliance. These audits can be requested by both...

  18. Global assessment of internal audit competence

    African Journals Online (AJOL)

    kirstam

    4Key words: certified internal auditor, competency assessment, internal auditing, internal .... different perceptions of internal audit competencies needed: 11 general competencies essential to perform ...... report writing, presentation) ccxxxii.

  19. Formation of Small Bottle Light Beams

    Institute of Scientific and Technical Information of China (English)

    RAO Lian-zhou; PU Ji-Xiong

    2007-01-01

    A method for obtaining small bottle light beams,e.g.0.92λ×0.4λ,in a high numerical-aperture lens system is proposed and numerically demonstrated.This can be achieved by changing the radius of each zone of the binary element and polarization rotation angle of the cylindrically polarized vectorial vortex beam.It is found that the transversal and axial sizes of this bottle bearn are equal to about 0.92λ and 0.4λ,respectively.In addition,the connection between angular momentum and topological Pancharatnam charge is also shown.

  20. NEVER AUDIT ALONE--THE CASE FOR AUDIT TEAMS

    Science.gov (United States)

    On-site audits conducted by technical and quality assurance (QA) experts at the data-gathering location are the core of an effective QA program. However, inadequate resources for such audits are the bane of a QA program, and the proposed solution frequently is to send only one au...

  1. 27 CFR 24.255 - Bottling or packing wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises and...

  2. 27 CFR 19.749 - Bottling and packaging record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling and packaging record. 19.749 Section 19.749 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Account § 19.749 Bottling and packaging record. The bottling and packaging record shall be prepared...

  3. Bottle-feeding and the Risk of Pyloric Stenosis

    DEFF Research Database (Denmark)

    Krogh, Camilla; Biggar, Robert J; Fischer, Thea Kølsen

    2012-01-01

    Bottle-feeding has been suggested to increase the risk of pyloric stenosis (PS). However, large population-based studies are needed. We examined the effect of bottle-feeding during the first 4 months after birth, by using detailed data about the timing of first exposure to bottle...

  4. 27 CFR 28.102 - Bottles to have closures affixed.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  5. PET吹灌旋一体机及其在环保型轻量瓶装水生产线中的应用%The Application of the Blow-Fill-Cap BFC-Block in Bottled Water Production Line of Environmentally Friendly and Light-weight-situation

    Institute of Scientific and Technical Information of China (English)

    朱建锋; 张洁生

    2013-01-01

    The article describes the structure and composition of the Blow-Fill-Cap BFC-Block and process,explaining the necessity and significance of the environment-friendly light flask,to further illustrate the application of the Blow-Fill-Cap BFC-Block in bottled water production line of environmentally friendly lightweight-situation .%介绍了吹灌旋一体机的主要结构及其组成和工艺流程,同时说明环保型轻量瓶技术产生的必要性和意义,进一步说明吹灌旋一体机在环保型轻量瓶装水生产线上应用情况.

  6. Environmental auditing: Theory and applications

    Science.gov (United States)

    Thompson, Dixon; Wilson, Melvin J.

    1994-07-01

    The environmental audit has become a regular part of corporate environmental management in Canada and is also gaining recognition in the public sector. A 1991 survey of 75 private sector companies across Canada revealed that 76% (57/75) had established environmental auditing programs. A similar survey of 19 federal, provincial, and municipal government departments revealed that 11% (2/19) had established such programs. The information gained from environmental audits can be used to facilitate and enhance environmental management from the single facility level to the national and international levels. This paper is divided into two sections: section one examines environmental audits at the facility/company level and discusses environmental audit characteristics, trends, and driving forces not commonly found in the available literature. Important conclusions are: that wherever possible, an action plan to correct the identified problems should be an integral part of an audit, and therefore there should be a close working relationship between auditors, managers, and employees, and that the first audits will generally be more difficult, time consuming, and expensive than subsequent audits. Section two looks at environmental audits in the broader context and discusses the relationship between environmental audits and three other environmental information gathering/analysis tools: environmental impact assessments, state of the environment reports, and new systems of national accounts. The argument is made that the information collected by environmental audits and environmental impact assessments at the facility/company level can be used as the bases for regional and national state of the environment reports and new systems of national accounts.

  7. Monitoring and Analysis of Pollution of Pseudomonas Aeruginosa of Bottled Drinking Water in Kang-ping County from 2014 to 2015%2014年-2015年沈阳市康平县桶装饮用水中铜绿假单胞菌的污染监测分析

    Institute of Scientific and Technical Information of China (English)

    苗杨

    2016-01-01

    Objective To analyze Pseudomonas aeruginosa contamination monitoring results of bottled drinking wa-ter, in order to ensure the quality and safety of barreled drinking water,and to provide scientific basis for management.Methods 200 samples of bottled drinking water was randomly selected in Kangping County from 2014 to 2015,among them,120 samples with the pure water for drinking,45 samples with mineral water for drinking , and 35 samples with nat-ural mineral water for drinking.Of the 200 bottled drinking water samples were analyzed.According to the different treat-ment methods,these samples were divided into two groups, one group (88 samples) was treated by drinking water ma-chine, the other group (112 samples) were not treated by drinking water machine.In accordance with the relevant na-tional standards,For the detection of 200 samples of barreled drinking water in Pseudomonas aeruginosa.Pseudomonas aeruginosa was detected in 200 samples of barreled drinking water.The test results were analyzed.Results Test results show that a total of 60 samples ( 30.00%) were detected in Pseudomonas aeruginosa, including pure drinking water Pseudomonas aeruginosa detection rate was 23.33%, drinking mineral water Pseudomonas aeruginosa detection rate was 57.78%, drinking natural mineral water of Pseudomonas aeruginosa bacteria detection rate was 17.14%.In 200 sam-ples, the unqualified rate of the total number of bacteria was 39.50%, the unqualified rate of coliform bacteria was 14.5%.Statistical analysis on the Pseudomonas aeruginosa detection rate and the total number of bacteria of the unquali-fied rate showed that, there were no differences between the groups ( P >0.05 ); statistical analysis on the Pseudomonas aeruginosa detection rate and coliform unqualified rate, we know that, there was significant difference between group, P<0.05).The study also found that, Pseudomonas aerugi-nosa bacteria detection rate of bottled drinking water through drinking water machine

  8. Audit quality and the audit partner effect : Evidence from European listed companies

    OpenAIRE

    Buuren, van, R.

    2009-01-01

    The main objective of this study is to provide evidence on the differences in audit quality amongst audit partners. I attribute these dissimilarities to (i) differences in the audit risk perception and the risk appetite of individual audit partners and (ii) to differences in the personal business case of audit partners. As a result, three audit partner archetypes have been identified: liberal, high quality and conservative. This paper will provide evidence that 50% of the audit partners (53% ...

  9. Qualitative Evaluation Audits in Practice.

    Science.gov (United States)

    Greene, Jennifer C.; And Others

    1988-01-01

    Field experiences with external (qualitative) evaluation audits based on the work of E. G. Guba and Y. S. Lincoln (1981, 1985) are detailed, including evaluation contexts and purposes, procedures, and findings. Such audits represent a viable meta-evaluative tool for assessing the quality of naturalistic evaluation results. (SLD)

  10. Your Audit and Financial Controls.

    Science.gov (United States)

    Hatch, Mary B.; And Others

    Audits should be performed on school accounting systems because they are required by law and they provide independent reviews of school financial procedures and suggestions for improvement. A licensed certified public accountant, public accountant, or an accountant who has met the Continuation of Education requirement should perform the audit.…

  11. A "Quick & Dirty" Strategic Audit

    Science.gov (United States)

    Brawley, Dorothy E.

    2016-01-01

    In teaching Strategic Management, it is imperative that students first learn how to audit the firm before they begin analysis, planning and implementation. Unfortunately this is a step often overlooked. Without a complete and up to date audit, any analysis conducted would have questionable validity and reliability. This report focuses on an…

  12. Czech Republic : Accounting and Auditing

    OpenAIRE

    World Bank

    2003-01-01

    Financial reporting and auditing requirements in the Czech Republic are currently in transition from complying with national standards to complying with International Accounting Standards (IAS), International Standards on Auditing (ISA), and the European Union (EU) Directives. By law, the Czech Republic seeks to attain maximum compliance with the EU Fourth and Seventh Directives and the E...

  13. Fuzzy audit risk modeling algorithm

    Directory of Open Access Journals (Sweden)

    Zohreh Hajihaa

    2011-07-01

    Full Text Available Fuzzy logic has created suitable mathematics for making decisions in uncertain environments including professional judgments. One of the situations is to assess auditee risks. During recent years, risk based audit (RBA has been regarded as one of the main tools to fight against fraud. The main issue in RBA is to determine the overall audit risk an auditor accepts, which impact the efficiency of an audit. The primary objective of this research is to redesign the audit risk model (ARM proposed by auditing standards. The proposed model of this paper uses fuzzy inference systems (FIS based on the judgments of audit experts. The implementation of proposed fuzzy technique uses triangular fuzzy numbers to express the inputs and Mamdani method along with center of gravity are incorporated for defuzzification. The proposed model uses three FISs for audit, inherent and control risks, and there are five levels of linguistic variables for outputs. FISs include 25, 25 and 81 rules of if-then respectively and officials of Iranian audit experts confirm all the rules.

  14. Common energy audit report

    Energy Technology Data Exchange (ETDEWEB)

    Kolesnikov, A.I.; Sheina, L.S.; Ivanov, N.S. [RDIEE, Moswoc (Russian Federation); Draborg, S.; Oestergaard, T. [Dansk Energi Analyse A/S, Vanloese (Denmark)

    1998-12-31

    The project encompassed following activities: Elaboration of a description of the Russian dairy sector including a mapping of the entire sector in respect of production capacity, actual production, products, production technologies and energy consumption; Energy audits at twelve selected dairies with different typical productions; Elaboration of an `Energy Audit Guidance` which describes how to perform energy audits in dairies and where to expect energy saving possibilities. The energy savings possibilities are often due to the same kind of problems, e.g. low production, inefficient equipment or manually control of the process equipment. The main problems that Russian dairies faces can be divided into the following categories: Old and inefficient technological equipment which is operated at low capacity with very low energy efficiency; Lack of knowledge about new energy efficient technologies; Financial problems which causes low interest and few possibilities for using funds for investment in energy efficient equipment; Energy savings do not lead to personal gains for the persons in the dairy management or other employees which causes low interst in energy savings. At some dairies it seemed to be a problem for the management to adapt to the new and very different conditions for enterprises in Russian today, where sales, production, production capacity and raw milk available are interconnected. With respect to energy matters it was often a wish to replace existing oversized equipment with new equipment of the same size no matter that it is unlikely that the production will increase considerable in the future. The project has discovered that there is a need for demonstrating energy saving measures by implementation because it was in many ways hard for the dairy management`s to believe that, the energy consumption could be reduced dramatically without affecting could production or the processes. Furthermore, the project has discovered a need for transferring to the

  15. [Study of long-term water quality of stocked drinking water].

    Science.gov (United States)

    Kataoka, Hiromi; Kanaoka, Miki; Yamamura, Sayo; Mine, Takanori; Nishikawa, Jun-ichi; Semma, Masanori

    2013-01-01

    We examined changes in the quality of drinking water stockpiled under various conditions for emergency use. The results indicated that the change in the quality of the stocked water was influenced mainly by the preservation period and not by the amount of water in the bottle. To maintain water quality, the amount of residual chlorine is less important than using sufficiently sterilized water, bottles and caps in the bottling process. Washing the bottles with a small amount of boiling water was not sufficient to ensure complete inhibition of microbial growth.

  16. Defining a Forensic Audit

    Directory of Open Access Journals (Sweden)

    Stevenson G. Smith

    2009-03-01

    Full Text Available Disclosures about new financial frauds and scandals are continually appearing in the press.  As a consequence, the accounting profession's traditional methods of monitoring corporate financial activities are under intense scrutiny.  At the same time, there is recognition that principles-based GAAP from the International Accounting Standards Board will become the recognized standard in the U.S.  The authors argue that these two factors will change the practices used to fight corporate malfeasance as investigators adapt the techniques of accounting into a forensic audit engagement model.

  17. IS BOTTLE GOURD A NATURAL GUARD??

    Directory of Open Access Journals (Sweden)

    Kaur Satbir

    2011-06-01

    Full Text Available Bottle gourd is one of the excellent fruits gifted by nature to human beings having composition of all the essential constituents that are required for good health and quality human life. Lagenaria siceraria (Cucurbitaceae, popularly known as bottle gourd, lauki or ghiya, is a climbing plant, which bears hard-shelled and bottle-shaped gourds as fruits. It forms an excellent diet being rich in vitamins, iron and minerals. The fruit is reported to contain the triterepenoide cucurbitacins B, D, G, H, two sterols viz., fucosterol and campesterol, aerpene byonolic acid (an allergic compound, flavone-C glycosides (a ribosome inactivating protein and lagenin. Extract of the ghiya seeds show antibiotic activity. The fruit juice is helpful in constipation, premature graying hair, urinary disorders and insomnia. Lauki has the highest content of choline among all the vegetables known to man till date, which serves as the precursor of neurotransmitter acetylcholine, which in turn is crucial for retaining and enhancing memory. Furthermore, Lagenaria siceraria is a vegetable useful in the management of many diseases like cardiac disorders, hepatic diseases and ulcer. Bottle gourd juice helps to regulate blood pressure of hypertensive patients, because of its high potassium content. It helps in losing weight quickly, because of its high dietary fiber and low fat and cholesterol content. In the light of above facts, the authors have made a humble attempt to compile an up-to-date review article on Lagenaria siceraria covering its phytochemistry, pharmacological actions and folk medicinal uses.

  18. Chemometrics-enhanced fiber optic Raman detection, discrimination and quantification of chemical agents simulants concealed in commercial bottles

    Directory of Open Access Journals (Sweden)

    Nataly J. Galan-Freyle

    2014-11-01

    Full Text Available Chemometric techniques such as partial least squares combined with discriminant analysis (PLS–DA and artificial neural networks (ANN analysis were used to enhance the detection, discrimination and quantification of chemical warfare agents simulants. Triethyl phosphate (TEP mixed with commercial products in their original containers was analyzed through the container walls using fiber-optic-coupled Raman spectroscopy. Experiments were performed by employing a custom built optical fiber probe operating at 488 nm. Detection was accomplished using mixtures of the contents of the commercial bottles and water. The bottle materials included green plastic, green glass, clear plastic, clear glass, amber glass and white plastic. To account for the low scattering-peak intensities of some bottle materials, integration times were increased. Short integration times provided no information for amber glass and white plastic. The limits of detection were on the order of 1–5%, depending on bottle materials and contents. Good discrimination was achieved with PLS–DA when models were generated from a dataset originating from the same type of bottle material. ANN performed better when large sets of data were used, discriminating TEP from bottle materials and contents, as well as accurately classifying over 90% of the data.

  19. Can virtual streetscape audits reliably replace physical streetscape audits?

    Science.gov (United States)

    Badland, Hannah M; Opit, Simon; Witten, Karen; Kearns, Robin A; Mavoa, Suzanne

    2010-12-01

    There is increasing recognition that the neighborhood-built environment influences health outcomes, such as physical activity behaviors, and technological advancements now provide opportunities to examine the neighborhood streetscape remotely. Accordingly, the aims of this methodological study are to: (1) compare the efficiencies of physically and virtually conducting a streetscape audit within the neighborhood context, and (2) assess the level of agreement between the physical (criterion) and virtual (test) audits. Built environment attributes associated with walking and cycling were audited using the New Zealand Systematic Pedestrian and Cycling Environment Scan (NZ-SPACES) in 48 street segments drawn from four neighborhoods in Auckland, New Zealand. Audits were conducted physically (on-site) and remotely (using Google Street View) in January and February 2010. Time taken to complete the audits, travel mileage, and Internet bandwidth used were also measured. It was quicker to conduct the virtual audits when compared with the physical audits (χ = 115.3 min (virtual), χ = 148.5 min (physical)). In the majority of cases, the physical and virtual audits were within the acceptable levels of agreement (ICC ≥  0.70) for the variables being assessed. The methodological implication of this study is that Google Street View is a potentially valuable data source for measuring the contextual features of neighborhood streets that likely impact on health outcomes. Overall, Google Street View provided a resource-efficient and reliable alternative to physically auditing the attributes of neighborhood streetscapes associated with walking and cycling. Supplementary data derived from other sources (e.g., Geographical Information Systems) could be used to assess the less reliable streetscape variables.

  20. Internal Audits: A Must for Governing Boards.

    Science.gov (United States)

    Allcorn, Seth

    1983-01-01

    Internal auditing, which can help governing boards exercise their control responsibilities, is discussed, including financial, compliance, and operations auditing. Governing boards should be prepared to handle reports on operation audits, financial and compliance audits, and reviews of management information systems. (MLW)

  1. 9 CFR 149.4 - Spot audit.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Spot audit. 149.4 Section 149.4... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.4 Spot audit. (a) In addition to regularly scheduled site audits, certified production sites will be subject to spot audits. (1) Random...

  2. 30 CFR 725.19 - Audit.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Audit. 725.19 Section 725.19 Mineral Resources... REGULATIONS REIMBURSEMENTS TO STATES § 725.19 Audit. The agency shall arrange for an independent audit no less... Circular No. A-102, Attachment P. The audits will be performed in accordance with the “Standards for...

  3. 24 CFR 236.901 - Audit.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Audit. 236.901 Section 236.901... AND INTEREST REDUCTION PAYMENT FOR RENTAL PROJECTS Audits § 236.901 Audit. Where a State or local... mortgagor of a mortgage insured or held by the Commissioner under this part, it shall conduct audits...

  4. 38 CFR 41.230 - Audit costs.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Audit costs. 41.230 Section 41.230 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Audits § 41.230 Audit costs. (a)...

  5. 21 CFR 820.22 - Quality audit.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Quality audit. 820.22 Section 820.22 Food and... QUALITY SYSTEM REGULATION Quality System Requirements § 820.22 Quality audit. Each manufacturer shall establish procedures for quality audits and conduct such audits to assure that the quality system is...

  6. Annexing new audit spaces: challenges and adaptations

    NARCIS (Netherlands)

    Andon, P.; Free, C.; O'Dwyer, B.

    2015-01-01

    Purpose - The purpose of this paper is to examine attempts at jurisdictional expansion in the audit field. Specifically, the authors critically analyse the professional implications of "new audit spaces", that is, novel auditing and assurance services that have emerged at intersections between audit

  7. 20 CFR 627.480 - Audits.

    Science.gov (United States)

    2010-04-01

    ... two years; (ii) Is completed within one year after the end of the period covered by the audit and... instituted within 6 months after receipt of the audit report (where appropriate, corrective action shall... this section, be submitted for such audits or may have the audit resolution reviewed through the...

  8. 20 CFR 627.481 - Audit resolution.

    Science.gov (United States)

    2010-04-01

    ... audit resolution report be submitted within 60 days from the date that the audit report is issued by the... a 180-day period within which to resolve the audit with its subrecipient(s), and shall request that the audit resolution report be submitted at the end of that 180-day period. (b) After receiving the...

  9. 38 CFR 41.510 - Audit findings.

    Science.gov (United States)

    2010-07-01

    ... requirement upon which the audit finding is based, including statutory, regulatory, or other citation. (3) The condition found, including facts that support the deficiency identified in the audit finding. (4... judging the prevalence and consequences of the audit findings, such as whether the audit findings...

  10. Towards a framework for auditing environmental reports

    NARCIS (Netherlands)

    Kamp, A.E.M.

    2002-01-01

    Audits of environmental reports first appeared about ten years ago. Both the number of environmental reports and the audit of these reports is still increasing. Audit firms perform a major part of these audits, but other professionals are also active in this field. Even today there are still

  11. 20 CFR 655.24 - Audits.

    Science.gov (United States)

    2010-04-01

    .... The audit letter will: (1) State the application has been selected for audit and note documentation... days from the date of the audit letter's issuance, by which the required documentation must be received by the CO; and (3) Advise that failure to comply with the audit process may result in a finding by...

  12. 12 CFR 989.2 - Audit requirements.

    Science.gov (United States)

    2010-01-01

    ... independent, external audit of and an audit report on its individual financial statement. (b) The OF board of directors shall obtain an audit and an audit report on the combined annual financial statements for the Bank... and Banking FEDERAL HOUSING FINANCE BOARD OFFICE OF FINANCE FINANCIAL STATEMENTS OF THE BANKS §...

  13. 7 CFR 1291.11 - Audit requirements.

    Science.gov (United States)

    2010-01-01

    ... PROGRAM-FARM BILL § 1291.11 Audit requirements. Each year that a State receives a grant under the SCBGP-FB, the State is required to conduct an audit of the expenditures of SCBGP-FB funds. If the Single Audit... audit of all SCBGP-FB funds no later than 60 days after the end date of the grant agreement. The...

  14. 7 CFR 3052.510 - Audit findings.

    Science.gov (United States)

    2010-01-01

    ... programs. The auditor's determination of whether a deficiency in internal control is a reportable condition... AGRICULTURE AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Auditors § 3052.510 Audit findings. (a) Audit findings reported. The auditor shall report the following as audit findings in...

  15. 29 CFR 99.510 - Audit findings.

    Science.gov (United States)

    2010-07-01

    ... programs. The auditor's determination of whether a deficiency in internal control is a reportable condition... Secretary of Labor AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Auditors § 99.510 Audit findings. (a) Audit findings reported. The auditor shall report the following as audit findings in...

  16. Community College Internal Auditors: Internal Audit Guidebook.

    Science.gov (United States)

    Jones, Ronna; And Others

    This guidebook includes information compiled by the "Audit Manual" committee of Community College Internal Auditors (CCIA) from several California community college districts regarding their internal auditing practices. The first section of the guidebook discusses the purpose of internal audits, indicating that audits assist members of…

  17. On the nature of auditing: The audit partner effect : Research on the effect of individual audit partners on audit quality and the information dynamics of accounting data

    NARCIS (Netherlands)

    Buuren, van J.P.

    2009-01-01

    This doctoral thesis is about whether auditing is ‘static and mechanic’ of nature or the opposite: ‘dynamic and organic’. If auditing is considered ‘static and mechanic’ of nature, this implies that standard audit solutions are available and can uniformly be applied by the audit partners. Moreover,

  18. Annexing new audit spaces: challenges and adaptations

    NARCIS (Netherlands)

    Andon, P.; Free, C.; O'Dwyer, B.

    2015-01-01

    Purpose - The purpose of this paper is to examine attempts at jurisdictional expansion in the audit field. Specifically, the authors critically analyse the professional implications of "new audit spaces", that is, novel auditing and assurance services that have emerged at intersections between audit

  19. The Strategic Options of Supreme Audit Institutions

    DEFF Research Database (Denmark)

    Klarskov Jeppesen, Kim; Carrington, Thomas; Catasús, Bino

    2017-01-01

    Based on the theory of professional competition, this paper identifies and investigates four strategic options of supreme audit institutions (SAIs) through a case study of four Nordic national audit offices: a performance auditing strategy; a financial auditing strategy; a portfolio strategy...

  20. Internal Audits: A Must for Governing Boards.

    Science.gov (United States)

    Allcorn, Seth

    1983-01-01

    Internal auditing, which can help governing boards exercise their control responsibilities, is discussed, including financial, compliance, and operations auditing. Governing boards should be prepared to handle reports on operation audits, financial and compliance audits, and reviews of management information systems. (MLW)