WorldWideScience

Sample records for waste water

  1. Wasted waters.

    Science.gov (United States)

    Niemczynowicz, J

    1996-11-01

    This article presents the increasing mismanagement of water as a result of increasing delivery of water volume, water pollution, and water wasting. One example of water mismanagement is irrigation, through which 67% of water is withdrawn from the hydrological cycle. In addition, reports from European communities reveal that pesticides from agriculture worsen the existing underground pollution. Furthermore, a 25% drop in land productivity was observed in Africa due to erosion, salinization, water logging, and desertification. Also, 23% of withdrawn water goes to industries, which are the major polluters. Since 1900 about 250,000 tons of cadmium have been produced worldwide, which eventually enter and harm the aquatic and terrestrial ecosystems. Moreover, high mercury levels were observed in Malaysia's Kelang River in the late 1980s, and river pollution in Thailand and Malaysia is recorded to be 30-100 times higher than accepted levels. Aside from that, the human race must also understand that there is a connection between water scarcity and water quality. When there is water pollution, it is expected that many people will suffer diarrheal diseases and intestinal parasite infections, which will further increase the mortality rate to 3.3 million per year. Realizing the severity of the problem, it is suggested that the human race must learn to recycle water like stormwater to prevent scarcity with drinking water.

  2. Water: Too Precious to Waste.

    Science.gov (United States)

    National Geographic World, 1983

    1983-01-01

    Provides background information on many topics related to water. These include the water cycle, groundwater, fresh water, chemical wastes, water purification, river pollution, acid rain, and water conservation. Information is presented at an elementary level. (JM)

  3. Water: Too Precious to Waste.

    Science.gov (United States)

    National Geographic World, 1983

    1983-01-01

    Provides background information on many topics related to water. These include the water cycle, groundwater, fresh water, chemical wastes, water purification, river pollution, acid rain, and water conservation. Information is presented at an elementary level. (JM)

  4. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  5. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  6. Solid Wastes and Water Quality.

    Science.gov (United States)

    DeWalle, F. B.; Chian, E. S. K.

    1978-01-01

    Presents a literature review of solid wastes and water quality, covering publications of 1976-77. This review covers areas such as: (1) environmental impacts and health aspects for waste disposal, and (2) processed and hazardous wastes. A list of 80 references is also presented. (HM)

  7. REUSE OF WASTE WATER

    OpenAIRE

    Carvalho, Nathália Leal; Hentz,Paulo; Silva, Josemar Marques; Barcellos, Afonso Lopes

    2014-01-01

    http://dx.doi.org/10.5902/2236130812585Given that water is a limited natural resource essential to life, questions about the conservation and preservation of water resources has been the focus of studies by bodies which conservationists seek alternatives for better use of natural resources. The technologies use water solutions are sustainable and contribute to the rational use of water, providing the conservation of water resources for future generations. The continuous increase of the world ...

  8. Section 10: Ground Water - Waste Characteristics & Targets

    Science.gov (United States)

    HRS Training. The waste characteristics factor category in the ground water pathway is made up of two components: the toxicity/mobility of the most hazardous substance associated with the site and the hazardous waste quantity at the site.

  9. Sustainable treatment of municipal waste water

    DEFF Research Database (Denmark)

    Hansen, Peter Augusto; Larsen, Henrik Fred

    treatment technologies are to be assessed. This paper will present the first LCA results from running existing life cycle impact assessment (LCIA) methodology on some of the waste water treatment technologies. Keywords: Sustainability, LCA, micropollutants, waste water treatment technologies.......The main goal of the EU FP6 NEPTUNE program is to develop new and improve existing waste water treatment technologies (WWTT) and sludge handling technologies for municipal waste water, in accordance with the concepts behind the EU Water Framework Directive. As part of this work, the project.......e. heavy metals, pharmaceuticals and endocrine disruptors) in the waste water. As a novel approach, the potential ecotoxicity and human toxicity impacts from a high number of micropollutants and the potential impacts from pathogens will be included. In total, more that 20 different waste water and sludge...

  10. A Primer on Waste Water Treatment.

    Science.gov (United States)

    Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.

    This information pamphlet is for teachers, students, or the general public concerned with the types of waste water treatment systems, the need for further treatment, and advanced methods of treating wastes. Present day pollution control methods utilizing primary and secondary waste treatment plants, lagoons, and septic tanks are described,…

  11. Onsite Waste Water Treatment System

    Directory of Open Access Journals (Sweden)

    T. Subramani

    2014-06-01

    Full Text Available Onsite wastewater treatment systems (OWTSs have evolved from the pit privies used widely throughout history to installations capable of producing a disinfected effluent that is fit for human consumption. Although achieving such a level of effluent quality is seldom necessary, the ability of onsite systems to remove settles able solids, floatable grease and scum, nutrients, and pathogens. From wastewater discharges defines their importance in protecting human health and environmental resources. In the modern era, the typical onsite system has consisted primarily of a septic tank and a soil absorption field, also known as a subsurface wastewater infiltration system, or SWIS. In this manual, such systems are referred to as conventional systems. Septic tanks remove most settle able and floatable material and function as an anaerobic bioreactor that promotes partial digestion of retained organic matter. Septic tank effluent, which contains significant concentrations of pathogens and nutrients, has traditionally been discharged to soil, sand, or other media absorption fields (SWISs for further treatment through biological processes, adsorption, filtration, and infiltration into underlying soils. Conventional systems work well if they are installed in areas with appropriate soils and hydraulic capacities; designed to treat the incoming waste load to meet public health, ground water, and surface water performance standards; installed properly; and maintained to ensure long-term performance. These criteria, however, are often not met. Only about one-third of the land area in the United States has soils suited for conventional subsurface soil absorption fields. System densities in some areas exceed the capacity of even suitable soils to assimilate wastewater flows and retain and transform their contaminants. In addition, many systems are located too close to ground water or surface waters and others, particularly in rural areas with newly installed public

  12. Environmental sustainability of ozonating municipal waste water

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, Peter Augusto

    The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e....... In total more that 20 different waste water and sludge treatment technologies are to be assessed. This paper will present the preliminary LCA results from running the induced versus avoided impact approach (mainly based on existing LCIA methodology) on one of the WWTTs, i.e. ozonation....

  13. Environmental sustainability of ozonating municipal waste water

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, Peter Augusto

    The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e....... In total more that 20 different waste water and sludge treatment technologies are to be assessed. This paper will present the preliminary LCA results from running the induced versus avoided impact approach (mainly based on existing LCIA methodology) on one of the WWTTs, i.e. ozonation....

  14. Lyophilization for Water Recovery From Solid Waste

    Science.gov (United States)

    Flynn, Michael; Litwiller, Eric; Reinhard, Martin

    2003-01-01

    This abstract describes the development of a solid waste treatment system designed for a near term human exploration mission. The technology being developed is an energy- efficient lyophilization technique that recovers water from spacecraft solid waste. In the lyophilization process water in an aqueous waste is frozen and then sublimed, resulting in the separation of the waste into a dried solid material and liquid water. This technology is ideally suited to applications where water recovery rates approaching 100% are desirable but production of CO, is not. Water contained within solid wastes accounts for approximately 3% of the total water balance. If 100% closure of the water loop is desired the water contained within this waste would need to be recovered. To facilitate operation in microgravity thermoelectric heat pumps have be used in place of traditional fluid cycle heat pumps. A mathematical model of a thermoelectric lyophilizer has been developed and used to generate energy use and processing rate parameters. The results of laboratory investigations and discussions with ALS program management have been used to iteratively arrive at a prototype design. This design address operational limitations which were identified in the laboratory studies and handling and health concerns raised by ALS program management. The current prototype design is capable of integration into the ISS Waste Collection System.

  15. Lyophilization for Water Recovery From Solid Waste

    Science.gov (United States)

    Flynn, Michael; Litwiller, Eric; Reinhard, Martin

    2003-01-01

    This abstract describes the development of a solid waste treatment system designed for a near term human exploration mission. The technology being developed is an energy- efficient lyophilization technique that recovers water from spacecraft solid waste. In the lyophilization process water in an aqueous waste is frozen and then sublimed, resulting in the separation of the waste into a dried solid material and liquid water. This technology is ideally suited to applications where water recovery rates approaching 100% are desirable but production of CO, is not. Water contained within solid wastes accounts for approximately 3% of the total water balance. If 100% closure of the water loop is desired the water contained within this waste would need to be recovered. To facilitate operation in microgravity thermoelectric heat pumps have be used in place of traditional fluid cycle heat pumps. A mathematical model of a thermoelectric lyophilizer has been developed and used to generate energy use and processing rate parameters. The results of laboratory investigations and discussions with ALS program management have been used to iteratively arrive at a prototype design. This design address operational limitations which were identified in the laboratory studies and handling and health concerns raised by ALS program management. The current prototype design is capable of integration into the ISS Waste Collection System.

  16. Food Waste in the Food-Energy-Water Nexus: Energy and Water Footprints of Wasted Food

    Science.gov (United States)

    Kibler, K. M.; Sarker, T.; Reinhart, D.

    2016-12-01

    The impact of wasted food to the food-energy-water (FEW) nexus is not well conceptualized or quantified, and is thus poorly understood. While improved understanding of water and energy requirements for food production may be applied to estimate costs associated with production of wasted food, the post-disposal costs of food waste to energy and water sectors are unknown. We apply both theoretical methods and direct observation of landfill leachate composition to quantify the net energy and water impact of food waste that is disposed in landfills. We characterize necessary energy inputs and biogas production to compute net impact to the energy sector. With respect to water, we quantify the volumes of water needed to attain permitted discharge concentrations of treated leachate, as well as the gray water footprint necessary for waste assimilation to the ambient regulatory standard. We find that approximately three times the energy produced as biogas (4.6E+8 kWh) is consumed in managing food waste and treating contamination from wasted food (1.3E+9 kWh). This energy requirement represents around 3% of the energy consumed in food production. The water requirement for leachate treatment and assimilation may exceed the amount of water needed to produce food. While not a consumptive use, the existence and replenishment of sufficient quantities of water in the environment for waste assimilation is an ecosystem service of the hydrosphere. This type of analysis may be applied to create water quality-based standards for necessary instream flows to perform the ecosystem service of waste assimilation. Clearer perception of wasted food as a source/sink for energy and water within the FEW nexus could be a powerful approach towards reducing the quantities of wasted food and more efficiently managing food that is wasted. For instance, comparative analysis of FEW impact across waste management strategies (e.g. landfilling, composting, anaerobic digestion) may assist local governments

  17. Integrated waste and water management system

    Science.gov (United States)

    Murray, R. W.; Sauer, R. L.

    1986-01-01

    The performance requirements of the NASA Space Station have prompted a reexamination of a previously developed integrated waste and water management system that used distillation and catalytic oxydation to purify waste water, and microbial digestion and incineration for waste solids disposal. This system successfully operated continuously for 206 days, for a 4-man equivalent load of urine, feces, wash water, condensate, and trash. Attention is given to synergisms that could be established with other life support systems, in the cases of thermal integration, design commonality, and novel technologies.

  18. Integrated waste and water management system

    Science.gov (United States)

    Murray, R. W.; Sauer, R. L.

    1986-01-01

    The performance requirements of the NASA Space Station have prompted a reexamination of a previously developed integrated waste and water management system that used distillation and catalytic oxydation to purify waste water, and microbial digestion and incineration for waste solids disposal. This system successfully operated continuously for 206 days, for a 4-man equivalent load of urine, feces, wash water, condensate, and trash. Attention is given to synergisms that could be established with other life support systems, in the cases of thermal integration, design commonality, and novel technologies.

  19. Sustainable treatment of municipal waste water

    DEFF Research Database (Denmark)

    Hansen, Peter Augusto; Larsen, Henrik Fred

    The main goal of the EU FP6 NEPTUNE program is to develop new and improve existing waste water treatment technologies (WWTT) and sludge handling technologies for municipal waste water, in accordance with the concepts behind the EU Water Framework Directive. As part of this work, the project...... treatment technologies are to be assessed. This paper will present the first LCA results from running existing life cycle impact assessment (LCIA) methodology on some of the waste water treatment technologies. Keywords: Sustainability, LCA, micropollutants, waste water treatment technologies....... will develop and implement a methodology to compare and prioritize these technologies and optimizations based on a holistic approach. This will be achieved through the use of life cycle assessment (LCA) along with cost/efficiency analysis with focus on the effects of nutrients, pathogens and micropollutants (i...

  20. Waste water reuse pathways for processing tomato

    DEFF Research Database (Denmark)

    Battilani, A; Plauborg, Finn; Andersen, Mathias Neumann

    to use the lowest irrigation water quality without harming nor food safety neither yield and fruit or derivatives quality. The EU project SAFIR aims help farmers solve problems with low quality water and decreased access to water. New water treatment devices (prototypes) are under development to allow...... a safe use of waste water produced by small communities/industries (≤2000 EI) or of treated water discharged in irrigation channels. Water treatment technologies are coupled with irrigation strategies and technologies to obtain a flexible, easy to use, integrated management....

  1. Waste water treatment in Bukkerup (VB)

    DEFF Research Database (Denmark)

    Thomsen, Rikke; Overgaard, Morten; Jørgensen, Michael Søgaard

    1999-01-01

    In connection to the new waste water plan of Tølløse municipal the technical and environmental board has suggested that Bukkerup get a sewer system which brings the waste water to the treatment plant for Tysinge. All though the residents would like to list alternative suggestions which improve...... the local water environment but is still competitive.In this report the alternatives are listed, e.i. root system plants, sand filters and mini treatment plants.The conclusion is that root system plants and a combination of root system plants and sand filters are better that the sewer system....

  2. for the Waste Water Cleaning Plant

    Directory of Open Access Journals (Sweden)

    E. V. Grigorieva

    2010-01-01

    Full Text Available A model of a waste water treatment plant is investigated. The model is described by a nonlinear system of two differential equations with one bounded control. An optimal control problem of minimizing concentration of the polluted water on the given time interval is stated and solved analytically with the use of the Pontryagin Maximum Principle and Green's Theorem. Computer simulations of a model of an industrial waste water treatment plant show the advantage of using our optimal strategy. Possible applications are discussed.

  3. STUDY ON WASTE WATER TREATMENT PLANTS

    Directory of Open Access Journals (Sweden)

    Mariana DUMITRU

    2015-04-01

    Full Text Available Biogas is more and more used as an alternative source of energy, considering the fact that it is obtained from waste materials and it can be easily used in cities and rural communities for many uses, between which, as a fuel for households. Biogas has many energy utilisations, depending on the nature of the biogas source and the local demand. Generally, biogas can be used for heat production by direct combustion, electricity production by fuel cells or micro-turbines, Combined Hest and Power generation or as vehicle fuel. In this paper we search for another uses of biogas and Anaerobe Digestion substrate, such as: waste water treatment plants and agricultural wastewater treatment, which are very important in urban and rural communities, solid waste treatment plants, industrial biogas plants, landfill gas recovery plants. These uses of biogas are very important, because the gas emissions and leaching to ground water from landfill sites are serious threats for the environment, which increase more and more bigger during the constant growth of some human communities. That is why, in the developed European countries, the sewage sludge is treated by anaerobe digestion, depending on national laws. In Romania, in the last years more efforts were destined to use anaerobe digestion for treating waste waters and management of waste in general. This paper can be placed in this trend of searching new ways of using with maximum efficiency the waste resulted in big communities.

  4. The artificial water cycle: emergy analysis of waste water treatment.

    Science.gov (United States)

    Bastianoni, Simone; Fugaro, Laura; Principi, Ilaria; Rosini, Marco

    2003-04-01

    The artificial water cycle can be divided into the phases of water capture from the environment, potabilisation, distribution, waste water collection, waste water treatment and discharge back into the environment. The terminal phase of this cycle, from waste water collection to discharge into the environment, was assessed by emergy analysis. Emergy is the quantity of solar energy needed directly or indirectly to provide a product or energy flow in a given process. The emergy flow attributed to a process is therefore an index of the past and present environmental cost to support it. Six municipalities on the western side of the province of Bologna were analysed. Waste water collection is managed by the municipal councils and treatment is carried out in plants managed by a service company. Waste water collection was analysed by compiling a mass balance of the sewer system serving the six municipalities, including construction materials and sand for laying the pipelines. Emergy analysis of the water treatment plants was also carried out. The results show that the great quantity of emergy required to treat a gram of water is largely due to input of non renewable fossil fuels. As found in our previous analysis of the first part of the cycle, treatment is likewise characterised by high expenditure of non renewable resources, indicating a correlation with energy flows.

  5. Waste water treatment in Triglav national park

    OpenAIRE

    PETERLIN, BLAŽ

    2012-01-01

    The thesis presents the pollution problems caused by municipal waste water in the protected area of the Triglav National Park. Although most people are not detecting the problem, the consequences of water pollution in the area are clearly visible in the mountain lakes and downstream springs. Water resources near the mountain huts and agricultural land show obvious signs of nurient overload. Non- native plant and animal species recklessly discharged into the natural environment also pose a thr...

  6. Properties of waste stillage from shochu distillery and waste water occurred sosei paper production process

    OpenAIRE

    山内, 正仁; 平田, 登基男; 前野, 祐二; 三原, めぐみ; 松藤, 康司

    1999-01-01

    As an effective utilization of waste stillage, which will be banned from being dumped into sea from the year of 2001, authors have been studied and succeeded to make the sosei paper by using waste stillage form shochu distillery. This research is tried to consider the property of waste stillage from shochu distillery ( sweet potato waste stillage and barley waste stillage) and the weight and property of waste water in compressing samples added some amount of old newspaper to waste stillage. F...

  7. Properties of waste stillage from shochu distillery and waste water occurred sosei paper production process

    OpenAIRE

    山内, 正仁; 平田, 登基男; 前野, 祐二; 三原, めぐみ; 松藤, 康司

    1999-01-01

    As an effective utilization of waste stillage, which will be banned from being dumped into sea from the year of 2001, authors have been studied and succeeded to make the sosei paper by using waste stillage form shochu distillery. This research is tried to consider the property of waste stillage from shochu distillery ( sweet potato waste stillage and barley waste stillage) and the weight and property of waste water in compressing samples added some amount of old newspaper to waste stillage. F...

  8. Process for the biological purification of waste water

    DEFF Research Database (Denmark)

    1992-01-01

    Process for the biological purification of waste water by the activated sludge method, the waste water being mixed with recirculated sludge and being subjected to an anaerobic treatment, before the waste water thus treated is alternately subjected to anoxic and aerobic treatments and the waste...... water thus treated is led into a clarification zone for settling sludge, which sludge is recirculated in order to be mixed with the crude waste water. As a result, a simultaneous reduction of the content both of nitrogen and phosphorus of the waste water is achieved....

  9. Industrial Water Waste, Problems and the Solution

    Directory of Open Access Journals (Sweden)

    Alif Noor Anna

    2004-01-01

    Full Text Available Recently, the long term development in Indonesia has changed agricultural sector to the industrial sector. This development can apparently harm our own people. This is due to the waste that is produced from factories. The waste from various factories seems to have different characteristics. This defference encourages us to be able to find out different of methods of managing waste so that cost can be reduced, especially in water treatment. In order that industrial development and environmental preservation can run together in balance, many institutions involved should be consider, especially in the industrial chain, the environment, and human resource, these three elements can be examined in terms of their tolerance to waste.

  10. 77 FR 43149 - Water and Waste Disposal Loans and Grants

    Science.gov (United States)

    2012-07-24

    ... CFR Part 1777 RIN 0572-AC26 Water and Waste Disposal Loans and Grants AGENCY: Rural Utilities Service... related to the Section 306C Water and Waste Disposal (WWD) Loans and Grants Program, which provides water... additional priority points to the colonias that lack access to water or waste disposal systems and...

  11. Saving energy from waste water

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Pearce

    1999-03-01

    This paper gives details of energy savings from wastewater in the laundry industry by recycling the water from the last rinse to the first wash, and recovering heat from hot water that is too dirty to recycle. The cost savings achieved at the laundry operated by the Royal London Hospital, and improvements in the steam supply system with water from steam traps collected and returned to the boiler house are reported. Case studies are presented involving energy savings in the textile industry where effluent from the washing stage is recycled to the scouring stage, and in the distillery industry involving recovery of heat from hot water for process preheating. (uk)

  12. Energy requirements for waste water treatment.

    Science.gov (United States)

    Svardal, K; Kroiss, H

    2011-01-01

    The actual mathematical models describing global climate closely link the detected increase in global temperature to anthropogenic activity. The only energy source we can rely on in a long perspective is solar irradiation which is in the order of 10,000 kW/inhabitant. The actual primary power consumption (mainly based on fossil resources) in the developed countries is in the range of 5 to 10 kW/inhabitant. The total power contained in our nutrition is in the range of 0.11 kW/inhabitant. The organic pollution of domestic waste water corresponds to approximately 0.018 kW/inhabitant. The nutrients contained in the waste water can also be converted into energy equivalents replacing market fertiliser production. This energy equivalent is in the range of 0.009 kW/inhabitant. Hence waste water will never be a relevant source of energy as long as our primary energy consumption is in the range of several kW/inhabitant. The annual mean primary power demand of conventional municipal waste water treatment with nutrient removal is in the range of 0.003-0.015 kW/inhabitant. In principle it is already possible to reduce this value for external energy supply to zero. Such plants should be connected to an electrical grid in order to keep investment costs low. Peak energy demand will be supported from the grid and surplus electric energy from the plant can be is fed to the grid. Zero 'carbon footprint' will not be affected by this solution. Energy minimisation must never negatively affect treatment efficiency because water quality conservation is more important for sustainable development than the possible reduction in energy demand. This argument is strongly supported by economical considerations as the fixed costs for waste water infrastructure are dominant.

  13. Electrooxidation of organics in waste water

    Science.gov (United States)

    Hitchens, G. D.; Murphy, Oliver J.; Kaba, Lamine; Verostko, Charles E.

    1990-01-01

    Electrooxidation is a means of removing organic solutes directly from waste waters without the use of chemical expendables. Research sponsored by NASA is currently being pursued to demonstrate the feasibility of the concept for oxidation of organic impurities common to urine, shower waters and space-habitat humidity condensates. Electrooxidation of urine and waste water ersatz was experimentally demonstrated. This paper discusses the electrooxidation principle, reaction kinetics, efficiency, power, size, experimental test results and water-reclamation applications. Process operating potentials and the use of anodic oxidation potentials that are sufficiently low to avoid oxygen formation and chloride oxidation are described. The design of an electrochemical system that incorporates a membrane-based electrolyte based on parametric test data and current fuel-cell technology is presented.

  14. Electrooxidation of organics in waste water

    Science.gov (United States)

    Hitchens, G. D.; Murphy, Oliver J.; Kaba, Lamine; Verostko, Charles E.

    1990-01-01

    Electrooxidation is a means of removing organic solutes directly from waste waters without the use of chemical expendables. Research sponsored by NASA is currently being pursued to demonstrate the feasibility of the concept for oxidation of organic impurities common to urine, shower waters and space-habitat humidity condensates. Electrooxidation of urine and waste water ersatz was experimentally demonstrated. This paper discusses the electrooxidation principle, reaction kinetics, efficiency, power, size, experimental test results and water-reclamation applications. Process operating potentials and the use of anodic oxidation potentials that are sufficiently low to avoid oxygen formation and chloride oxidation are described. The design of an electrochemical system that incorporates a membrane-based electrolyte based on parametric test data and current fuel-cell technology is presented.

  15. Integrated water and waste management

    DEFF Research Database (Denmark)

    Harremoës, P.

    1997-01-01

    The paper discusses concepts and developments within water quantity, water quality, integrated environmental assessment and wastewater treatment. The historical and the global perspectives are used in the discussion of the role of engineers in today's society. Sustainabilty and ethics are taken...... into the analysis. There is a need for re-evaluation of the resource, society and environment scenarios with a view to the totality of the system and with proper analysis of the flow of water and matter through society. Among the tools are input-output analysis and cradle to grave analysis, in combination...

  16. Waste water reuse pathways for processing tomato

    DEFF Research Database (Denmark)

    Battilani, A; Plauborg, Finn; Andersen, Mathias Neumann

    to use the lowest irrigation water quality without harming nor food safety neither yield and fruit or derivatives quality. The EU project SAFIR aims help farmers solve problems with low quality water and decreased access to water. New water treatment devices (prototypes) are under development to allow......  Direct or indirect water reuse involves several aspects: contamination by faecal, inorganic and xenobiotic pollutants; high levels of suspended solids and salinity; rational use of the dissolved nutrients (particularly nitrogen). The challenge is apply new strategies and technologies which allows...... a safe use of waste water produced by small communities/industries (≤2000 EI) or of treated water discharged in irrigation channels. Water treatment technologies are coupled with irrigation strategies and technologies to obtain a flexible, easy to use, integrated management....

  17. Water Balance Covers For Waste Containment: Principles and Practice

    Science.gov (United States)

    Water Balance Covers for Waste Containment: Principles and Practices introduces water balance covers and compares them with conventional approaches to waste containment. The authors provided detailed analysis of the fundamentals of soil physics and design issues, introduce appl...

  18. THE EFFECTS OF ABATTOIR WASTE ON WATER QUALITY IN ...

    African Journals Online (AJOL)

    Osondu

    This paper examined the impact of abattoir wastes on water quality around an abattoir ... Aluminium (Al) Cyanide (Cn), Boron (B), and Nickel (Ni)., as well as some physical and chemical ... Key words: Abattoir; Wastes; Water quality, Pollution.

  19. A Prototype of Industrial Waste Water Treatment Using Electrocoagulation

    OpenAIRE

    Boriboonsuksri Phonnipha; Jun-krob Natth

    2017-01-01

    This paper proposes a construct of electrocoagulation waste water treatment system. The system consists of reactor tank, skimmer, cyclone tank and sediment tank. Waste water is feed into reactor tank. The electrochemical reaction is made emulsification to waste water. The contaminants are removed from waste water and can be divided to two kinds: light weight suspensions be floating up and another be sediment. The flocculants are skim out and the sediments are pumped out to sludge container. A...

  20. Wash water waste pretreatment system

    Science.gov (United States)

    1977-01-01

    Investigations were completed on wash waters based on each candidate personal cleansing agent. Evaluations of coagulants, antifoam agents, and the effect of promising antifoams on the chemical precipitation were included. Based on these evaluations two candidate soaps as well as their companion antifoam agents were selected for further work. Operating parameters included the effect of soap concentration, ferric chloride concentration, duration of mixing, and pore size of depth filters on the degree of soap removal. The effect of pressure on water flow through filter cartridges and on the rate of decline of water flow was also investigated. The culmination of the program was the recommendation of a pretreatment concept based on chemical precipitation followed by pressure filtration.

  1. Tracing Waste Water with Li isotopes

    Science.gov (United States)

    Millot, R.; Desaulty, A. M.

    2015-12-01

    The contribution of human activities such as industries, agriculture and various domestic inputs, becomes more and more significant in the chemical composition of the dissolved load of rivers. Human factors act as a supplementary key process. Therefore the mass-balance for the budget of catchments and river basins include anthropogenic disturbances. In the present study, we investigate waste water tracing by the use of Li isotopes in a small river basin near Orléans in France (l'Egoutier, 15 km² and 5 km long). It is well known that Li has strategic importance for numerous industrial applications including its use in the production of batteries for both mobile devices (computers, tablets, smartphones, etc.) and electric vehicles, but also in pharmaceutical formulations. In the present work, we collected river waters samples before and after the release from a waste water treatment plant connected to an hospital. Lithium isotopic compositions are rather homogeneous in river waters with δ7Li values around -0.5‰ ± 1 along the main course of the stream (n=7). The waste water sample is very different from the natural background of the river basin with Li concentration being twice of the values without pollution and significant heavy lithium contribution (δ7Li = +4‰). These preliminary results will be discussed in relation with factors controlling the distribution of Li and its isotopes in this specific system and compared with the release of other metals such as Pb or Zn.

  2. 77 FR 14307 - Water and Waste Disposal Loans and Grants

    Science.gov (United States)

    2012-03-09

    ...; ] DEPARTMENT OF AGRICULTURE Rural Utilities Service 7 CFR 1777 RIN 0572-AC26 Water and Waste Disposal Loans and... (RUS) proposes to amend the regulations pertaining to the Section 306C Water and Waste Disposal (WWD) Loans and Grants program, which provides water and waste disposal facilities and services to...

  3. Arsenic in industrial waste water from copper production technological process

    Directory of Open Access Journals (Sweden)

    Biljana Jovanović

    2013-12-01

    Full Text Available Investigation of arsenic in industrial waste water is of a great importance for environment. Discharge of untreated waste water from a copper production process results in serious pollution of surface water, which directly affects flora and fauna, as well as humans. There is a need for efficient and environmentally acceptable treament of waste waters containing heavy metals and arsenic. The paper presents an analyisis of the waste water from The Copper Smelter which is discharged into the Bor river. The expected arsenic content in treated waste water after using HDS procedure is also presented.

  4. Solar detoxification of waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, J. M.

    2000-07-01

    Heterogeneous photocatalysis is a discipline which includes a large variety of reactions: mild or total oxidations, dehydrogenation, hydrogen transfer. oxygen-18 and deuterium isotopic exchange, metal deposition, water detoxification, gaseous pollutant removal, etc. In line with the latter point, it can be considered as one of the new Advanced Oxidation Technologies (AOT) for air and water purification treatment. Several books and reviews have been recently devoted to this problem (1-6). A recent review has reported more than 1200 references on the subject (7). Heterogeneous photocatalysis can be carried out in various media: gas phase, pure organic liquid phases or aqueous solutions. As for classical heterogeneous catalysis, the overall process can be decomposed into five independent steps: 1. Transfer of the reactants in the fluid to the surface. 2. Adsorption of a least one of the reactants. 3. Reaction in the adsorbed phase 4. Desorption of the product (s) 5. Removal of the products from the interface region. (Author) 11 refs.

  5. Solar Detoxification of Waste Waters

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, J.M.

    2002-07-01

    Heterogeneous photocatalysis is a discipline which includes a large variety of reactions: mild or total oxidations, dehydrogenation, hydrogen transfer, oxygen-18 and deuterium isotopic exchange, metal deposition, water detoxification, gaseous pollutant removal, etc. In line with the latter point, it can be considered as one of the new. Advanced Oxidation Technologies (AOT) for air and water purification treatment. Several books and reviews have been recently devoted to this problem (1-6). A recent review has reported more than 1200 references on the subject. Heterogeneous photocatalysis can be carried out in various media: gas phase, pure organic liquid phases or aqueous solutions. As for classical heterogeneous catalysis, the overall process can be decomposed into five independent steps: 1. Transfer of the reactants in the fluid phase to the surface 2. Adsorption of a least one of the reactants 3. Reaction in the adsorbed phase 4. Desorption of the products 5. Removal of the products from the interface region. (Author)

  6. Self Calibrating Flow Estimation in Waste Water Pumping Stations

    DEFF Research Database (Denmark)

    Kallesøe, Carsten Skovmose; Knudsen, Torben

    2016-01-01

    Knowledge about where waste water is flowing in waste water networks is essential to optimize the operation of the network pumping stations. However, installation of flow sensors is expensive and requires regular maintenance. This paper proposes an alternative approach where the pumps and the waste...... water pit are used for estimating both the inflow and the pump flow of the pumping station. Due to the nature of waste water, the waste water pumps are heavily affected by wear and tear. To compensate for the wear of the pumps, the pump parameters, used for the flow estimation, are automatically...

  7. Flotation of ores and waste waters

    Directory of Open Access Journals (Sweden)

    R. Radić

    2016-10-01

    Full Text Available World generally requires a very high standard of pollution control, and mining companies pride their organisations as being examples of excellence in this field. Hydrometallurgical mining processes decrease the production of gas and solid pollutants into the atmosphere and maximize the recirculation of solvents at every level of waste waters treatment. The extra electrowinning of metal using the circular hydrometallurgical process ensures that the maximum amount of mined metal is recovered. Reducing pollution helps to improve company profitability.

  8. Analytical chemistry of industrial waste water

    Energy Technology Data Exchange (ETDEWEB)

    Lur' e, Yu.Yu.

    1984-01-01

    This book gives a detailed account of modern methods of analyzing waste water from industrial enterprises. It describes methods of analyzing both water which is formed directly in one or another technical process, and water which has come through purifying structures, where it has been purified by various chemical, physical-chemical and biochemical methods. Many new methods are presented which have been published in recent years and which have undergone massive testing in Soviet and foreign laboratories. The book is intended for workers of chemical-analytical laboratories of chemical, metallurgic and other sectors of industry, production of various organic products and also for workers of water inspection, sanitary-epidemiology stations and water-purifying structures.

  9. Is phosphorus recovery from waste water feasible?

    Science.gov (United States)

    Berg, U; Knoll, G; Kaschka, E; Weidler, P G; Nüesch, R

    2007-02-01

    Phosphorus (P) recovery from waste water must become a predominant goal of all countries to face the limited resources of this essential nutrient. The induced crystallisation of calcium phosphates straight from the waste water phase applying tobermorite-rich calcium silicate hydrate compounds (CSH) from the construction industry as the trigger material has proved to be a suitable method. Laboratory and semi-technical scale experiments were carried out in fixed bed, stirred reactor and expanded bed mode. P-loads of the crystallisation substrates of up to 13 wt-% total P (P-tot) (30 wt-% P2O5) were achieved. Recycling options of the generated products, both as substitute for phosphate rock in the phosphate industry and as a new fertiliser in agriculture, were demonstrated. Indicative operating and investment costs were estimated for conversion of conventional waste water treatment plants (WWTP) designed for nutrient removal and P-precipitation with iron and aluminium reagents to the proposed new crystallisation technology for simultaneous P-removal and P-recovery.

  10. Self Calibrating Flow Estimation in Waste Water Pumping Stations

    DEFF Research Database (Denmark)

    Kallesøe, Carsten Skovmose; Knudsen, Torben

    2016-01-01

    Knowledge about where waste water is flowing in waste water networks is essential to optimize the operation of the network pumping stations. However, installation of flow sensors is expensive and requires regular maintenance. This paper proposes an alternative approach where the pumps and the waste...... water pit are used for estimating both the inflow and the pump flow of the pumping station. Due to the nature of waste water, the waste water pumps are heavily affected by wear and tear. To compensate for the wear of the pumps, the pump parameters, used for the flow estimation, are automatically...... calibrated. This calibration is done based on data batches stored at each pump cycle, hence makes the approach a self calibrating system. The approach is tested on a pumping station operating in a real waste water network....

  11. Waste Water Management and Infectious Disease. Part II: Impact of Waste Water Treatment

    Science.gov (United States)

    Cooper, Robert C.

    1975-01-01

    The ability of various treatment processes, such as oxidation ponds, chemical coagulation and filtration, and the soil mantle, to remove the agents of infectious disease found in waste water is discussed. The literature concerning the efficiency of removal of these organisms by various treatment processes is reviewed. (BT)

  12. Waste Water Management and Infectious Disease. Part II: Impact of Waste Water Treatment

    Science.gov (United States)

    Cooper, Robert C.

    1975-01-01

    The ability of various treatment processes, such as oxidation ponds, chemical coagulation and filtration, and the soil mantle, to remove the agents of infectious disease found in waste water is discussed. The literature concerning the efficiency of removal of these organisms by various treatment processes is reviewed. (BT)

  13. Region 9 NPDES Facilities - Waste Water Treatment Plants

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA...

  14. Region 9 NPDES Facilities 2012- Waste Water Treatment Plants

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA...

  15. Treatment for hydrazine-containing waste water solution

    Science.gov (United States)

    Yade, N.

    1986-01-01

    The treatment for waste solutions containing hydrazine is presented. The invention attempts oxidation and decomposition of hydrazine in waste water in a simple and effective processing. The method adds activated charcoal to waste solutions containing hydrazine while maintaining a pH value higher than 8, and adding iron salts if necessary. Then, the solution is aerated.

  16. Aerospace vehicle water-waste management

    Science.gov (United States)

    Pecoraro, J. N.

    1973-01-01

    The collection and disposal of human wastes, such as urine and feces, in a spacecraft environment are performed in an aesthetic and reliable manner to prevent degradation of crew performance. The waste management system controls, transfers, and processes materials such as feces, emesis, food residues, used expendables, and other wastes. The requirements, collection, transport, and waste processing are described.

  17. Aerospace vehicle water-waste management

    Science.gov (United States)

    Pecoraro, J. N.

    1973-01-01

    The collection and disposal of human wastes, such as urine and feces, in a spacecraft environment are performed in an aesthetic and reliable manner to prevent degradation of crew performance. The waste management system controls, transfers, and processes materials such as feces, emesis, food residues, used expendables, and other wastes. The requirements, collection, transport, and waste processing are described.

  18. Risk management in waste water treatment.

    Science.gov (United States)

    Wagner, M; Strube, I

    2005-01-01

    With the continuous restructuring of the water market due to liberalisation, privatisation and internationalisation processes, the requirements on waste water disposal companies have grown. Increasing competition requires a target-oriented and clearly structured procedure. At the same time it is necessary to meet the environment-relevant legal requirements and to design the processes to be environment-oriented. The implementation of risk management and the integration of such a management instrument in an existing system in addition to the use of modern technologies and procedures can help to make the operation of the waste water treatment safer and consequently strengthen market position. The risk management process consists of three phases, risk identification, risk analysis/risk assessment and risk handling, which are based on each other, as well as of the risk managing. To achieve an identification of the risks as complete as possible, a subdivision of the kind of risks (e.g. legal, financial, market, operational) is suggested. One possibility to assess risks is the portfolio method which offers clear representation. It allows a division of the risks into classes showing which areas need handling. The determination of the appropriate measures to handle a risk (e.g. avoidance, reduction, shift) is included in the concluding third phase. Different strategies can be applied here. On the one hand, the cause-oriented strategy, aiming at preventive measures which aim to reduce the probability of occurrence of a risk (e.g. creation of redundancy, systems with low susceptibility to malfunction). On the other hand, the effect-oriented strategy, aiming to minimise the level of damage in case of an undesired occurrence (e.g. use of alarm systems, insurance cover).

  19. Submerged demineralize system processing of TMI-2 accident waste water

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, H.F.; Quinn, G.J.

    1983-02-01

    Accident-generated radioactive waste at Three Mile Island Unit 2 includes a varity of high and low specific-activity waste. The high-specific-activity waste, particularly over one million gallons of contaminated water, required special processing and secondary waste handling. General public utilities and its contractors developed a zeolite-based ion-exchange system called the Submerged Demineralizer System to reduce contamination levels in the water to below allowable limits. Testing and modifications resulted in an operating system that had successfully processed waste water from the Reactor Coolant Bleed Tanks, the Reactor Building Basement, and the Reactor Coolant System as of August 1982. System design objectives were met and decontamination criteria established in 10 CFR 20 were attained. Additional wastes that could not be handled routinely were generated by another water-processing system, called EPICOR II. EPICOR II wastes are discussed. Low-specific-activity (LSA) wastes such as trash and resin-bed waste canisters are also included in handling. LSA wastes are routinely handled and shipped according to existing industry practice. Plant records are summarized to provide approximate yearly volumes and curie loadings of low-specific-activity wastes being shipped off the Island to a commercial burial site.

  20. Sources of Phthalates and Nonylphenoles in Municipal Waste Water

    DEFF Research Database (Denmark)

    Vikelsøe, J.; Thomsen, M.; Johansen, E.

    to estimate the contribution from all of these sources to the waste water as well as the role of long-range air transport. Two local rivers were analysed for comparison. Finally, waste water inlet from the local water treatment plant, where the sources converge at a single point, were analysed. A mass balance...... for each source was calculated in relation to the total mass flow into the waste water plant, making it possible to evaluate the absolute and relative importance of each type of source. The sources investigated accounted for about 12% of the influx of DEHP, the predominating phthalate, to the waste water...... sample. The deposition concentrations were very low compared to the waste water. The deposition rates showed a seasonal variation with a minimum occurring two month after the winter temperature minimum. Surprisingly, no influence of the wind speed and direction was indicated. The concentration...

  1. POSSIBILITIES FOR WASTE WATER UTITLIZATION FROM CANNING INDUSTRY

    Directory of Open Access Journals (Sweden)

    A. Kraevska

    2014-03-01

    Full Text Available Waste waters from the different processing sectors (branch, activities of the canning factories was investigated. It was established that the greatest organic pollution is a result of the production of frozen half-fried potatoes. The possibilities of reducing of the organic pollution by cultivating fungi of the genus Aspergillus and Trichoderma in the waste waters was studied.

  2. Method of treating ammonia-comprising waste water

    NARCIS (Netherlands)

    Van Loosdrecht, M.C.M.; Jetten, M.S.M.

    1998-01-01

    The invention relates to a method of treating ammonia-comprising waste water in which the bicarbonate ion is the counter ion of the ammonium ion present in the waste water. According to the invention half the ammonium is converted into nitrite, yielding an ammonia- and nitrite-containing solution, a

  3. Phosphate Removal and Recovery using Drinking Water Plant Waste Residuals

    Science.gov (United States)

    Water treatment plants are used to provide safe drinking water. In parallel, however, they also produce a wide variety of waste products which, in principle, could be possible candidates as resources for different applications. Calcium carbonate is one of such residual waste in ...

  4. Phosphate Removal and Recovery using Drinking Water Plant Waste Residuals

    Science.gov (United States)

    Water treatment plants are used to provide safe drinking water. In parallel, however, they also produce a wide variety of waste products which, in principle, could be possible candidates as resources for different applications. Calcium carbonate is one of such residual waste in ...

  5. Life cycle assessment of advanced waste water treatment

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, Peter Augusto

    . In total more that 20 different waste water and sludge treatment technologies are to be assessed. This paper will present the preliminary LCA results from running the induced versus avoided impact approach (mainly based on existing LCIA methodology) on one of the advanced treatment technologies, i......The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e...

  6. Efficiency Research on Meat Industry Waste Water Treatment Applying the Method of Dissolved Air Flotation

    OpenAIRE

    Valentinas Gerasimovas; Robertas Urbanavičius

    2012-01-01

    To protect environment from industrial pollution, strict requirements for waste water treatment are imposed. The purpose of research is to establish an optimal ratio of saturated liquid and meat industry waste water. Research included JCC “Traidenis” waste water treatment system installed in JSC “BHJ Baltic”. Investigations into treated waste water indicated that an optimal ratio of waste water and saturated liquid was 2/1 under duration time of 8 minutes. Efficient waste water treatment made...

  7. Mitigation of Metal Ion Pollution from Industrial Waste Water Using Waste Wool

    Science.gov (United States)

    Prajapat, Garima; Purohit, Praveen

    A study on the adsorption of copper (II) ions from the aqueous solution on waste wool had been carried out to analyze the adsorption capacity of waste wool, thereby aiming towards mitigation of metal ion pollution in industrial waste water. The effect of varying concentration of copper ions and varying time period, was studied on fixed weight of waste wool. The initial and final concentration of copper ions was measured by conductometric and spectrophotometric methods. Adsorption data were modeled with the langmuir and freundlich adsorption isotherms. The isotherm and first order equation were found to be applicable. Removal of metal ions using industrial waste wool is found to be favourable. Thus the work can be extended to study various physico-chemical parameters for removal of copper (II) ions from industrial effluents using waste wool. A later work can be involved where the waste wool adsorption parameter can be further utilized for composite ceramic products.

  8. Microbiological treatment of oil mill waste waters

    Directory of Open Access Journals (Sweden)

    Ranalli, A.

    1992-02-01

    Full Text Available Experiments of the biological treatment of the oil mill waste waters, deriving from continuous system, have been carried out with selected mutant ferments, adapted to rather forced toxic conditions. The commercial microbio formulations SNKD, LLMO and PSBIO have been utilized; the last two are liquid suspensions, constituted by living micro-organisms that, in contrast to those frozen or lyophilized, do not need be revitalized before their use and became completely active in short time. The experiments with the SNKD biological preparation were carried out both on filtered oil mill outflows (type A with an initial COD of approximately 43 g/l and on waste water dephenolized by Caro-acid (type B with a COD equal to 30 g/l. The experiments with LLMO and PSBIO complexes were conduced both on oil mill outflows filtered and diluted (ratio 1:0.5 with an initial COD equal to 44 g/l (type C, and on waste water that were filtered and preventatively subjected to a cryogenic treatment (type D, with an initial COD of approximately 22 g/l. The residual COD with the microbio formulation SNKD, was about 15 g/l (type A and 5 g/l (type B; with the PSBIO It was about 7 g/l (type C and 1.5 g/l (type D; with the microbio formulation LLMO it resulted in 6 g/l (type C and 1.3 g/l (type D.

    Han sido efectuadas pruebas de tratamiento biológico de alpechines, provenientes de sistemas continuos, con fermentos seleccionados adaptados a condiciones de toxicidad muy elevadas. Han sido utilizadas las formulaciones microbianas SNKD, LLMO y PSBIO; las dos últimas son suspensiones líquidas, constituidas por microorganismos vivos, los cuales a diferencia de los liofilizados o congelados, no deben ser revitalizados antes del uso; estos tienen una fase «lag» más breve y entran antes en completa actividad. Las pruebas con la preparación biológica SNKD han sido efectuadas en los alpechines filtrados (tipo A con DQO inicial alrededor de 43 g/l, y también con alpech

  9. Valorization technics by means of vermiculture for fatty wastes resulting from wastes water purification plants

    Energy Technology Data Exchange (ETDEWEB)

    Vignoles, C. (Service Assainissement, 31 - Toulouse (France))

    Fats, scums and other floating organic wastes extracted from waste water purification plants have always caused important problems of treatment to specialists. Municipal and technical services of Toulouse have elaborated an original valorization process. Results are simultaneously spectacular for environment and economically reasonable. One may think that this natural method is bound to experience interesting developments in the future.

  10. Water and waste water reclamation in a 21st century space colony

    Science.gov (United States)

    Jebens, H. J.; Johnson, R. D.

    1977-01-01

    The paper presents the results of research on closed-life support systems initiated during a system design study on space colonization and concentrates on the water and waste water components. Metabolic requirements for the 10,000 inhabitants were supplied by an assumed earth-like diet from an intensive agriculture system. Condensed atmospheric moisture provided a source of potable water and a portion of the irrigation water. Waste water was reclaimed by wet oxidation. The dual-water supply required the condensation of 175 kg/person-day of atmospheric water and the processing of 250 kg/person-day of waste water.

  11. Water and waste water reclamation in a 21st century space colony

    Science.gov (United States)

    Jebens, H. J.; Johnson, R. D.

    1977-01-01

    The paper presents the results of research on closed-life support systems initiated during a system design study on space colonization and concentrates on the water and waste water components. Metabolic requirements for the 10,000 inhabitants were supplied by an assumed earth-like diet from an intensive agriculture system. Condensed atmospheric moisture provided a source of potable water and a portion of the irrigation water. Waste water was reclaimed by wet oxidation. The dual-water supply required the condensation of 175 kg/person-day of atmospheric water and the processing of 250 kg/person-day of waste water.

  12. CHARACTERIZATION AND RECYCLING OF WASTE WATER FROM GUAYULE LATEX EXTRACTION

    Science.gov (United States)

    Guayule commercialization for latex production to be used in medical products and other applications is now a reality. Currently, waste water following latex extraction is discharged into evaporation ponds. As commercialization reaches full scale, the liquid waste stream from latex extraction will b...

  13. Air flotation treatment of salmon processing waste water

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This paper discusses methods for the reduction of the pollution strength of salmon processing waste water. Past research has indicated the success of air pressure...

  14. Economies of density for on-site waste water treatment

    NARCIS (Netherlands)

    Eggimann, Sven; Truffer, Bernhard; Maurer, Max

    2016-01-01

    Decentralised wastewater treatment is increasingly gaining interest as a means of responding to sustainability challenges. Cost comparisons are a crucial element of any sustainability assessment. While the cost characteristics of centralised waste water management systems (WMS) have been studied ext

  15. Region 9 NPDES Outfalls 2012- Waste Water Treatment Plants

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for waste water treatment plants which generally represent the site of the discharge....

  16. Region 9 NPDES Outfalls - Waste Water Treatment Plants

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for waste water treatment plants which generally represent the site of the discharge....

  17. Economies of density for on-site waste water treatment

    NARCIS (Netherlands)

    Eggimann, Sven; Truffer, Bernhard; Maurer, Max

    2016-01-01

    Decentralised wastewater treatment is increasingly gaining interest as a means of responding to sustainability challenges. Cost comparisons are a crucial element of any sustainability assessment. While the cost characteristics of centralised waste water management systems (WMS) have been studied

  18. Fixed-biofilm reactors applied to waste water treatment and aquacultural water recirculating systems

    NARCIS (Netherlands)

    Bovendeur, J.

    1989-01-01

    Fixed-biofilm waste water treatment may be regarded as one of the oldest engineered biological waste water treatment methods. With the recent introduction of modern packing materials, this type of reactor has received a renewed impuls for implementation in a wide field of water treatment.

    In

  19. Fixed-biofilm reactors applied to waste water treatment and aquacultural water recirculating systems.

    NARCIS (Netherlands)

    Bovendeur, J.

    1989-01-01

    Fixed-biofilm waste water treatment may be regarded as one of the oldest engineered biological waste water treatment methods. With the recent introduction of modern packing materials, this type of reactor has received a renewed impuls for implementation in a wide field of water treatment.In this the

  20. The impact of industrial waste of Venezuelan marine water

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Frank [Bechtel Corp., Gaithersburg, MD (United States); Guarino, Carmen [Guarino Engineers, Philadelphia, PA (United States); Arias, Marlene [Ministerio del Ambiente y Recursos Naturales Renovables, Caracas (Venezuela)

    1993-12-31

    The Puerto Cabello-Marron coastal area of Venezuela is an ideal location for industries that require large land areas, water, marine transportation, minimum habitation, cooling water, etc. However, mercury spills have produced concern in the entire coastal zone. The area was investigated and negative impacts were identified. Consequently, recommendations for waste water management were proceeded. 13 refs., 6 figs., 3 tabs.

  1. Actual problems of municipal cleaner’s waste waters

    Directory of Open Access Journals (Sweden)

    Konko¾ová Patrícia

    2000-03-01

    Full Text Available In paper are evaluated social and economical changes in water economy with emphasis on complex evaluation of municipal cleaner’s waste waters with respect of legislative, position of ownerskip relationskips and financial security of public experiences of water economy.

  2. ADVERSE IMPACTS OF WASTE WATER TREATMENT ­ A CASE STUDY

    Science.gov (United States)

    Industrial metal plating processes coat materials with metals, such as chromium, copper and nickel. After the plating process, excess metals are rinsed off and the rinse water is collected and then treated to remove metals prior to discharge of the rinse water into rivers. This waste water is typica...

  3. Discharge and Treatment of Waste Water in Denmark

    DEFF Research Database (Denmark)

    Larsen, Torben

    1990-01-01

    a population of 70.000 inhabitans, and waste water treatment takes place in two treatment plants. These plants are now being extended to perform tertiary treatment, to fulfil the new Danish requirements. From 1992, the maximum average concentrations allowed for municipal waste water discharges to receiving...... waters will be; 15 mg/1 for BOD5, 8 mg/1 for total nitrogen, and 1.5 mg/1 for total phosphorus. These general requirements cover all types of receiving waters, but regional authorities have, in a number of cases, fixed lower values for sensitive areas.......This paper describes the waste water treatment situation in the area of Esbjerg. This example was chosen because the situation in Esbjerg is typical of that of most towns in Denmark, and because Esbjerg is closest to the British situation with respect to the receiving water. Esbjerg has...

  4. The National Shipbuilding Research Program. Waste Water Treatment Technology Survey

    Science.gov (United States)

    1998-05-18

    clearwell . From this clearwell , the contaminated water is transferred to the induced air flotation process. The influent water is chemically pretreated to...stream is directed to a waste oil storage tank while the contaminated water flows into the equalization clearwell . From this clearwell , the...contaminated water flows into the equalization clearwell . From this clearwell , the contaminated water is transferred to the Induced Air Flotation

  5. The use of short rotation willows and poplars for the recycling of saline waste waters

    Science.gov (United States)

    Jaconette Mirck; Ronald S. Jr. Zalesny; Ioannis Dimitriou; Jill A. Zalesny; Timothy A. Volk; Warren E. Mabee

    2009-01-01

    The production of high-salinity waste waters by landfills and other waste sites causes environmental concerns. This waste water often contains high concentrations of sodium and chloride, which may end up in local ground and surface waters. Vegetation filter systems comprised of willows and poplars can be used for the recycling of saline waste water. These vegetation...

  6. Impact of Water Recovery from Wastes on the Lunar Surface Mission Water Balance

    Science.gov (United States)

    Fisher, John W.; Hogan, John Andrew; Wignarajah, Kanapathipi; Pace, Gregory S.

    2010-01-01

    Future extended lunar surface missions will require extensive recovery of resources to reduce mission costs and enable self-sufficiency. Water is of particular importance due to its potential use for human consumption and hygiene, general cleaning, clothes washing, radiation shielding, cooling for extravehicular activity suits, and oxygen and hydrogen production. Various water sources are inherently present or are generated in lunar surface missions, and subject to recovery. They include: initial water stores, water contained in food, human and other solid wastes, wastewaters and associated brines, ISRU water, and scavenging from residual propellant in landers. This paper presents the results of an analysis of the contribution of water recovery from life support wastes on the overall water balance for lunar surface missions. Water in human wastes, metabolic activity and survival needs are well characterized and dependable figures are available. A detailed life support waste model was developed that summarizes the composition of life support wastes and their water content. Waste processing technologies were reviewed for their potential to recover that water. The recoverable water in waste is a significant contribution to the overall water balance. The value of this contribution is discussed in the context of the other major sources and loses of water. Combined with other analyses these results provide guidance for research and technology development and down-selection.

  7. Fixed-biofilm reactors applied to waste water treatment and aquacultural water recirculating systems

    OpenAIRE

    Bovendeur, J.

    1989-01-01

    Fixed-biofilm waste water treatment may be regarded as one of the oldest engineered biological waste water treatment methods. With the recent introduction of modern packing materials, this type of reactor has received a renewed impuls for implementation in a wide field of water treatment.

    In this thesis the possibilities are presented for fixed-film post-treatment of anaerobically digested domestic sewage and water reconditioning in aquacultural water recirculation systems. Emphasis i...

  8. Treatment of waste water from textile Finishing mills (Part 7). Comparison and combination of treatment methods on actual waste water

    Energy Technology Data Exchange (ETDEWEB)

    Widayat; Winiati, W.; Indarto; Amirdin; Kusno, P.; Jufri, R.; Higashi, Kunishige; Hagiwara, Kazuyoshi; Saito, Toshihide; Honda, Shigeru

    1987-03-25

    Comparison of coagulative precipitation treatment, activated sludge treatment, and active carbon adsorption treatment was studied on the actual waste water from two dyeing factories (A and B) located in Bandung City, Indonesia. Quality of waste waters was evaluated by the measurement of pH, COD, BOD, and absorption spectrum. The waste water A had COD value of 180 mg/l, and the ratio of BOD to COD was 1.2. Biological oxidation, therefore, looks effective for this waste water. The COD removals became 67% and 83% by coagulative precipitation method and activated sludge respectively. The coagulative precipitation treatment followed by the activated sludge treatment made COD removal to 100%. The waste water B had COD value of 1005 mg/l, and the ratio of BOD to COD was 0.20. THe COD removal became 58% and 72% by coagulative method and the coagulation method followed by the activated sludge method respectively. For removing dyestuff in the waste water, both coagulative precipitation method and activated carbon absorption treatment were effective. (4 figs, 4 tabs, 3 refs)

  9. Improving the process of preparing waste water at Kamennolozhskiy UPPN

    Energy Technology Data Exchange (ETDEWEB)

    Abashev, R.G.

    1982-01-01

    The main reasons are examined for low efficient operation of treatment works at the Kamennolozhskiy UPPN and efficient ways to improve quality of waste water by introducing separate collection and preparation of individual types of water, organization of preliminary discharge at the main structures and pinpointing the duration of settling. The process of settling was studied on waste water under field conditions using sampling from a strictly defined level of the settling tank in definite time intervals and analysis of samples for the content of mechanical admixtures and petroleum products. The duration of settling in the reservoir was corrected according to the curve for the dependence of the contaminant content in the waste water on the duration of settling. It was indicated that introduction of recommendations guarantees quality of water of the required condition for injection into productive beds to maintain bed pressure.

  10. Photocatalytic post-treatment in waste water reclamation systems

    Science.gov (United States)

    Cooper, Gerald; Ratcliff, Matthew A.; Verostko, Charles E.

    1989-01-01

    A photocatalytic water purification process is described which effectively oxidizes organic impurities common to reclaimed waste waters and humidity condensates to carbon dioxide at ambient temperatures. With this process, total organic carbon concentrations below 500 ppb are readily achieved. The temperature dependence of the process is well described by the Arrhenius equation and an activation energy barrier of 3.5 Kcal/mole. The posttreatment approach for waste water reclamation described here shows potential for integration with closed-loop life support systems.

  11. Photocatalytic post-treatment in waste water reclamation systems

    Science.gov (United States)

    Cooper, Gerald; Ratcliff, Matthew A.; Verostko, Charles E.

    1989-01-01

    A photocatalytic water purification process is described which effectively oxidizes organic impurities common to reclaimed waste waters and humidity condensates to carbon dioxide at ambient temperatures. With this process, total organic carbon concentrations below 500 ppb are readily achieved. The temperature dependence of the process is well described by the Arrhenius equation and an activation energy barrier of 3.5 Kcal/mole. The posttreatment approach for waste water reclamation described here shows potential for integration with closed-loop life support systems.

  12. Optimal control of a waste water cleaning plant

    Directory of Open Access Journals (Sweden)

    Ellina V. Grigorieva

    2010-09-01

    Full Text Available In this work, a model of a waste water treatment plant is investigated. The model is described by a nonlinear system of two differential equations with one bounded control. An optimal control problem of minimizing concentration of the polluted water at the terminal time T is stated and solved analytically with the use of the Pontryagin Maximum Principle. Dependence of the optimal solution on the initial conditions is established. Computer simulations of a model of an industrial waste water treatment plant show the advantage of using our optimal strategy. Possible applications are discussed.

  13. Waste Water Treatment Plants and the Smart Grid

    DEFF Research Database (Denmark)

    Halvgaard, Rasmus; Tychsen, Peter; Munk-Nielsen, Thomas

    2014-01-01

    Denmark's political ambitions of a fossil fuel free energy system by 2050 calls for more renewable energy sources such as wind and solar. These green energy resources fluctuate and the transition to a green energy system requires a Smart Grid with flexible consumers that balance the fluctuating......, we must update their process control system to model based predictive control that monitors the changed flexible operation and plans ahead. The primary aim of a WWTP is to treat the incoming waste water as much as possible to ensure a sufficient effluent water quality and protect the environment...... of the recipient. The secondary aim is to treat the waste water using as little energy as possible. In the future waste water will be considered an energy resource, that contains valuable nutrients convertible to green biogas and in turn electricity and heat. In a Smart Grid consuming or producing energy...

  14. Coagulation & Ultra-filtration of Laundry Waste Waters using the Shower Water Reuse System (SWRS)

    Science.gov (United States)

    2013-12-19

    waste water: Cationic polymers for removal of contaminants and decreased fouling in microfiltration , Journal of Membrane Science (11 2013) Xia... microfiltration of laundry wastewater, Journal of Membrane Science (12 2013) TOTAL: 2 Books Number of Manuscripts: Patents Submitted Patents Awarded...SECURITY CLASSIFICATION OF: The objective was to determine the optimal coagulation conditions for pre-treating laundry waste water before microfiltration

  15. Review on Chemical treatment of Industrial Waste Water | Sahu ...

    African Journals Online (AJOL)

    Review on Chemical treatment of Industrial Waste Water. ... used and lot of wastewater generated from industries due their processes and washing purpose. A large number of chemicals are used for the production of potable water and ... powdered activated carbon (PAC) can remove taste and odour compounds and micro ...

  16. Photolytic AND Catalytic Destruction of Organic Waste Water Pollutants

    Science.gov (United States)

    Torosyan, V. F.; Torosyan, E. S.; Kryuchkova, S. O.; Gromov, V. E.

    2017-01-01

    The system: water supply source - potable and industrial water - wastewater - sewage treatment - water supply source is necessary for water supply and efficient utilization of water resources. Up-to-date technologies of waste water biological treatment require for special microorganisms, which are technologically complex and expensive but unable to solve all the problems. Application of photolytic and catalytically-oxidizing destruction is quite promising. However, the most reagents are strong oxidizers in catalytic oxidation of organic substances and can initiate toxic substance generation. Methodic and scientific approaches to assess bread making industry influence on the environment have been developed in this paper in order to support forecasting and taking technological decisions concerning reduction of this influence. Destructive methods have been tested: ultra violet irradiation and catalytic oxidation for extraction of organic compounds from waste water by natural reagents.

  17. Heavy metals in the waste and in the water discharge area of municipal solid waste

    Directory of Open Access Journals (Sweden)

    Luiz Ermindo Cavallet

    2013-12-01

    Full Text Available The county of Paranaguá discards 80 tons of municipal solid waste (MSW daily in the Embocuí landfill without proper treatment. The present study aimed to evaluate the concentration of arsenic (As, cadmium (Cd, chromium (Cr, lead (Pb and mercury (Hg in the dump area and to compare it with reference values for soil and water quality stipulated by CETESB (2005. The methodology of the study involved the collection of waste samples (organic waste mixed with soil from a depth of 1 m deep at 12 points of the dump, and the collection of water samples from a depth of 3 m at 3 points in the deposited waste. Extraction of heavy metals in the water samples was performed according to the USEPA (1999 method and analysis followed ICP-OES (Inductively Coupled Plasma - Atomic Emission Spectrometry. Analysis of the solid waste samples showed the following concentrations: (mg kg -1: As < 10; Cd < 1; Cr = 26; Pb = 52; e Hg = 0.2. The water samples showed the following concentrations: (mg L- 1: As < 5; Cd < 5; Cr =29 e Pb = 10. The amounts of heavy metals in samples of tailings and water from the landfill area fall below the values considered to create a risk of contamination.

  18. Water recovery using waste heat from coal fired power plants.

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Stephen W.; Morrow, Charles W.; Altman, Susan Jeanne; Dwyer, Brian P.

    2011-01-01

    The potential to treat non-traditional water sources using power plant waste heat in conjunction with membrane distillation is assessed. Researchers and power plant designers continue to search for ways to use that waste heat from Rankine cycle power plants to recover water thereby reducing water net water consumption. Unfortunately, waste heat from a power plant is of poor quality. Membrane distillation (MD) systems may be a technology that can use the low temperature waste heat (<100 F) to treat water. By their nature, they operate at low temperature and usually low pressure. This study investigates the use of MD to recover water from typical power plants. It looks at recovery from three heat producing locations (boiler blow down, steam diverted from bleed streams, and the cooling water system) within a power plant, providing process sketches, heat and material balances and equipment sizing for recovery schemes using MD for each of these locations. It also provides insight into life cycle cost tradeoffs between power production and incremental capital costs.

  19. The Fundamentals of Waste Water Sludge Characterization and Filtration

    Energy Technology Data Exchange (ETDEWEB)

    Scales, Peter J.; Dixon, David R.; Harbour, Peter J.; Stickland, Anthony D.

    2003-07-01

    The move to greater emphasis on the disposal of waste water sludges through routes such as incineration and the added cost of landfill emplacement puts high demands on dewatering technology for these sludges. A dear problem in this area is that waste water sludges are slow and difficult to dewater and traditional methods of laboratory measurement for prediction of filtration performance are inadequate. This is highly problematic for the design and operational optimisation of centrifuges, filters and settling devices in the waste water industry. The behaviour is assessed as being due to non-linear behaviour of these sludges which negates the use of classical approaches. These approaches utilise the linear portion of a t versus V{sup 2} plot (where t is the time to filtration and V is the specific filtrate volume) to extract a simple Darcian permeability. Without this parameter, a predictive capacity for dewatering using current theory is negated. (author)

  20. Absorption type water chiller fired directly by waste heat

    Science.gov (United States)

    Sauer, K. L.; Kalwar, K.

    1982-08-01

    The direct use of waste heat as heating element in a water chiller of the absorption type was studied. The chilled water is used as cooling element in the industrial process, producing the waste heat or for conditioning the workplace or further located places. The heat source is gaseous or liquid. The cooling capacity is in the range from 10 to 120 kW. After reviewing the different absorption systems, LiBr/H20 proved to be the most suitable. The process retained for experimenting was the manufacturing of synthetic materials polymer industry and was tested in two different factories. It is proved that the use of absorption type water chillers is practicable with an efficiency of 10% to 25% of the waste heat energy, but that the existing chillers need extensive conversion for obtaining economical operation when using a low temperature heating source.

  1. Treatment of waste water from a colloid sulfur washing department

    Energy Technology Data Exchange (ETDEWEB)

    Stepanenko, E.K.; Pivovarova, L.I.; Gumarova, M.M.; Kulik, G.I.; Khrapunova, G.G.

    1988-08-01

    Discusses a method for treatment of waste water from arsenic-sodium purification of coal gas in the Moscow gasworks. Waste water from sulfur washing is characterized: total content of various chemical compounds 90-120 g/l, pH value 8, arsenic content 300-500 mg/l, sulfur content 1.5-2.3 g/l. The flotation separation process used on a laboratory scale is evaluated: a 200 ml waste water sample was mixed intensively with 1 ml surfactants for 1.5-2.0 min. The mixture was then fed into a flotation column. Air supply rate of 20 m/h was used. Three flotation schemes are comparatively evaluated: without surfactants, with polyacrylamide and with polyvinyl alcohol with desulfurization efficiency of 86.7%, 87.5% and 96.6% respectively. Consumption rate of polyvinyl alcohol was 125 mg/l. 4 refs.

  2. Methods for chemical analysis of water and wastes

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-01

    This manual provides test procedures approved for the monitoring of water supplies, waste discharges, and ambient waters, under the Safe Drinking Water Act, the National Pollutant Discharge Elimination System, and Ambient Monitoring Requirements of Section 106 and 208 of Public Law 92-500. The test methods have been selected to meet the needs of federal legislation and to provide guidance to laboratories engaged in the protection of human health and the aquatic environment.

  3. Development of electrochemical denitrification from waste water containing ammonium nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Sawa, Toshio; Hirose, Yasuo; Ishii, Yoshinori; Takatsudo, Atsushi; Wakasugi, Kazuhico; Hayashi, Hiroshi

    1995-12-31

    The authors developed processes to dentrify waste water containing ammonium nitrate discharged from the nuclear fuel manufacturing works and to recover nitric acid and ammonia. For denitrification they applied the operating method and the conditions of operation to make 0.4mM or less from NH{sub 4}NO{sub 3} waste water of 1.5 M by 3 stages of electrodialysis cells. To recover nitric acid and ammonium water, they separated HNO{sub 3} solution of 6 M and NH{sub 4}OH solution with one unit of electrolysis cell, then absorbed NH{sub 3} gas from NH{sub 4}OH solution with water and applied the condition of operation to recover 8 M NH{sub 4}OH solution. The authors demonstrated that treatment and recovery can be carried out stably with actual waste water with a system through the combination of previously mentioned electrodialysis cells, electrolysis cells and an ammonia gas absorber. At present they are planning a plant where NH{sub 4}NO{sub 3} waste water of 4,500 mol can be treated per day.

  4. Ecotoxicity of waste water from industrial fires fighting

    Science.gov (United States)

    Dobes, P.; Danihelka, P.; Janickova, S.; Marek, J.; Bernatikova, S.; Suchankova, J.; Baudisova, B.; Sikorova, L.; Soldan, P.

    2012-04-01

    As shown at several case studies, waste waters from extinguishing of industrial fires involving hazardous chemicals could be serious threat primary for surrounding environmental compartments (e.g. surface water, underground water, soil) and secondary for human beings, animals and plants. The negative impacts of the fire waters on the environment attracted public attention since the chemical accident in the Sandoz (Schweizerhalle) in November 1986 and this process continues. Last October, special Seminary on this topic has been organized by UNECE in Bonn. Mode of interaction of fire waters with the environment and potential transport mechanisms are still discussed. However, in many cases waste water polluted by extinguishing foam (always with high COD values), flammable or toxic dangerous substances as heavy metals, pesticides or POPs, are released to surface water or soil without proper decontamination, which can lead to environmental accident. For better understanding of this type of hazard and better coordination of firemen brigades and other responders, the ecotoxicity of such type of waste water should be evaluated in both laboratory tests and in water samples collected during real cases of industrial fires. Case studies, theoretical analysis of problem and toxicity tests on laboratory model samples (e.g. on bacteria, mustard seeds, daphnia and fishes) will provide additional necessary information. Preliminary analysis of waters from industrial fires (polymer material storage and galvanic plating facility) in the Czech Republic has already confirmed high toxicity. In first case the toxicity may be attributed to decomposition of burned material and extinguishing foams, in the latter case it can be related to cyanides in original electroplating baths. On the beginning of the year 2012, two years R&D project focused on reduction of extinguish waste water risk for the environment, was approved by Technology Agency of the Czech Republic.

  5. Using phytoremediation technologies to upgrade waste water treatment in Europe.

    Science.gov (United States)

    Schröder, Peter; Navarro-Aviñó, Juan; Azaizeh, Hassan; Goldhirsh, Avi Golan; DiGregorio, Simona; Komives, Tamas; Langergraber, Günter; Lenz, Anton; Maestri, Elena; Memon, Abdul R; Ranalli, Alfonso; Sebastiani, Luca; Smrcek, Stanislav; Vanek, Tomas; Vuilleumier, Stephane; Wissing, Frieder

    2007-11-01

    One of the burning problems of our industrial society is the high consumption of water and the high demand for clean drinking water. Numerous approaches have been taken to reduce water consumption, but in the long run it seems only possible to recycle waste water into high quality water. It seems timely to discuss alternative water remediation technologies that are fit for industrial as well as less developed countries to ensure a high quality of drinking water throughout Europe. The present paper discusses a range of phytoremediation technologies to be applied in a modular approach to integrate and improve the performance of existing wastewater treatment, especially towards the emerging micro pollutants, i.e. organic chemicals and pharmaceuticals. This topic is of global relevance for the EU. Existing technologies for waste water treatment do not sufficiently address increasing pollution situation, especially with the growing use of organic pollutants in the private household and health sector. Although some crude chemical approaches exist, such as advanced oxidation steps, most waste water treatment plants will not be able to adopt them. The same is true for membrane technologies. Incredible progress has been made during recent years, thus providing us with membranes of longevity and stability and, at the same time, high filtration capacity. However, these systems are expensive and delicate in operation, so that the majority of communities will not be able to afford them. Combinations of different phytoremediation technologies seem to be most promising to solve this burning problem. To quantify the occurrence and the distribution of micropollutants, to evaluate their effects, and to prevent them from passing through wastewater collection and treatment systems into rivers, lakes and ground water bodies represents an urgent task for applied environmental sciences in the coming years. Public acceptance of green technologies is generally higher than that of

  6. Facility for generating crew waste water product for ECLSS testing

    Science.gov (United States)

    Buitekant, Alan; Roberts, Barry C.

    1990-01-01

    An End-use Equipment Facility (EEF) has been constructed which is used to simulate water interfaces between the Space Station Freedom Environmental Control and Life Support Systems (ECLSS) and man systems. The EEF is used to generate waste water to be treated by ECLSS water recovery systems. The EEF will also be used to close the water recovery loop by allowing test subjects to use recovered hygiene and potable water during several phases of testing. This paper describes the design and basic operation of the EEF.

  7. Facility for generating crew waste water product for ECLSS testing

    Science.gov (United States)

    Buitekant, Alan; Roberts, Barry C.

    1990-01-01

    An End-use Equipment Facility (EEF) has been constructed which is used to simulate water interfaces between the Space Station Freedom Environmental Control and Life Support Systems (ECLSS) and man systems. The EEF is used to generate waste water to be treated by ECLSS water recovery systems. The EEF will also be used to close the water recovery loop by allowing test subjects to use recovered hygiene and potable water during several phases of testing. This paper describes the design and basic operation of the EEF.

  8. Process water - waste water - cooling water. Papers; Prozesswasser/Abwasser/Kuehlwasser. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    Liese, F. (comp.)

    2002-07-01

    The 39th Metallurgical Seminar focused on water. Modern technologies for water purification and treatment were presented, legal boundary conditions were discussed, and aspects of process water, waste water and cooling water were gone into. Although the boundaries between these three types of water cannot be clearly defined, materials recovery is the prevalent aspect in process water treatment while waste water treatment primarily aims at reducing pollutant concentrations so that both environmental aspects and technical quality standards will be met. This proceedings volume attempts to give its readers a more precise picture of the issues at hand by presenting fundamental research, ecological and legal specifications, and selected examples of industrial applications. [German] Das 39. Metallurgische Seminar beschaeftigt sich mit Wasser. Neben der Praesentation grundsaetzlicher, moderner Techniken zur Reinhaltung und Aufbereitung von Wasser sowie der Darstellung der gesetzlichen Rahmenbedingungen umspannen die Fachvortraege Beitraege zu den Themen Prozesswasser, Abwasser, Kuehlwasser. Wenn auch die Grenzen innerhalb dieser Begriffe teilweise fliessend sind, so zeichnen sich die Prozesswaesser dadurch aus, dass man primaer - wie beispielsweise bei Waschsloesungen und Beizwaessern - an der Wiedergewinnung der Inhaltsstoffe interessiert ist, waehrend bei reinen Abwaessern und Kuehlturmwaessern bzw. deren Abschlaemmungen die massgebliche Aufgabe darin besteht, die Konzentration der Inhaltsstoffe so weit abzusenken, dass man einerseits den Umwelterfordernissen und andererseits den technischen Qualitaetsanforderungen gerecht wird. Ziel dieses Bandes ist es, an Hand von Grundlagen, der Darstellung der oekologischen und behoerdlichen Erfordernisse sowie ausgewaehlter Fallbeispiele aus der Industrie den Leserkreis naeher an diese Thematik heranzufuehren. (orig.)

  9. Waste water purification using new porous ceramics prepared by recycling waste glass and bamboo charcoal

    Science.gov (United States)

    Nishida, Tetsuaki; Morimoto, Akane; Yamamoto, Yoshito; Kubuki, Shiro

    2017-04-01

    New porous ceramics (PC) prepared by recycling waste glass bottle of soft drinks (80 mass%) and bamboo charcoal (20 mass%) without any binder was applied to the waste water purification under aeration at 25 °C. Artificial waste water (15 L) containing 10 mL of milk was examined by combining 15 mL of activated sludge and 750 g of PC. Biochemical oxygen demand (BOD) showed a marked decrease from 178 to 4.0 (±0.1) mg L-1 in 5 days and to 2.0 (±0.1) mg L-1 in 7 days, which was equal to the Environmental Standard for the river water (class A) in Japan. Similarly, chemical oxygen demand (COD) decreased from 158 to 3.6 (±0.1) mg L-1 in 5 days and to 2.2 (±0.1) mg L-1 in 9 days, which was less than the Environmental Standard for the Seawater (class B) in Japan: 3.0 mg L-1. These results prove the high water purification ability of the PC, which will be effectively utilized for the purification of drinking water, fish preserve water, fish farm water, etc.

  10. Monitoring the waste water of LEP

    CERN Document Server

    Rühl, I

    1999-01-01

    Along the LEP sites CERN is discharging water of differing quality and varying amounts into the local rivers. This wastewater is not only process water from different cooling circuits but also water that infiltrates into the LEP tunnel. The quality of the discharged wastewater has to conform to the local environmental legislation of our Host States and therefore has to be monitored constantly. The most difficult aspect regarding the wastewater concerns LEP Point 8 owing to an infiltration of crude oil (petroleum), which is naturally contained in the soil along octant 7-8 of the LEP tunnel. This paper will give a short summary of the modifications made to the oil/water separation unit at LEP Point 8. The aim was to obtain a satisfactory oil/water separation and to install a monitoring system for a permanent measurement of the amount of hydrocarbons in the wastewater.

  11. N-SINK - reduction of waste water nitrogen load

    Science.gov (United States)

    Aalto, Sanni; Tiirola, Marja; Arvola, Lauri; Huotari, Jussi; Tulonen, Tiina; Rissanen, Antti; Nykänen, Hannu

    2014-05-01

    Protection of the Baltic Sea from eutrophication is one of the key topics in the European Union environmental policy. One of the main anthropogenic sources of nitrogen (N) loading into Baltic Sea are waste water treatment plants, which are currently capable in removing only 40-70% of N. European commission has obliged Finland and other Baltic states to reduce nitrate load, which would require high monetary investments on nitrate removal processes in treatment plants. In addition, forced denitrification in treatment plants would increase emissions of strong greenhouse gas N2O. In this project (LIFE12 FI/ENV/597 N-SINK) we will develop and demonstrate a novel economically feasible method for nitrogen removal using applied ecosystem services. As sediment is known to have enormous capacity to reduce nitrate to nitrogen gas through denitrification, we predict that spatial optimization of the waste water discharge would be an efficient way to reduce nitrate-based load in aquatic systems. A new sediment filtration approach, which will increase both the area and time that nitrified waste water will be in contact with the reducing microbes of the sediment, is tested. Compared to the currently implemented practice, where purified waste water is discharged though one-point outlet system, we expect that sediment filtration system will result in more efficient denitrification and decreased N load to aquatic system. We will conduct three full-scale demonstrations in the receiving water bodies of waste water treatment plants in Southern and Central Finland. The ecosystem effects of sediment filtration system will be monitored. Using the most advanced stable isotope techniques will allow us accurately measure denitrification and unfavoured DNRA (reduction of nitrite to ammonium) activity.

  12. Integrated waste and water management in mining and metallurgical industries

    Institute of Scientific and Technical Information of China (English)

    B.K.C.CHAN; S.BOUZALAKOS; A.W.L.DUDENEY

    2008-01-01

    Extractive operations usually co-produce large quantities of unmarketable materials (mineral wastes),most of which are conventionally discarded to dumps (coarse material) and tailings ponds (fines).Escalating cost and regulation worldwide highlight an increasing need for reduction and re-use of such wastes.The present paper introduces a new integrated waste management scheme for solids and water.The scheme was exemplified by novel treatment of synthetic waste and process water linked to the biohydrometallurgical processing of metal sulphide flotation concentrates.Bioleaching of sulphide concentrate leads to two types of solid waste:a ferrihydrite/gypsum precipitate from neutralisation of the bioleach liquor and un-leached gangue.The paper indicates that,depending upon the minor components involved,the solid phases in admixture might be usefully distributed among three types of product:conventional underground backfill,cemented civil engineering backfill (particularly controlled low strength material or CLSM) and manufactured soil.It emphasizes CLSM containing simulated mineral waste,showing that such material can exhibit the required characteristics of strength,porosity and permeability.When toxic components,e.g.,arsenic from refractory gold ore,are present,encapsulation will be required.Process water is typically recycled as far as possible,although any excess should be treated before re-use or discharge.The paper also highlights treatment by reverse osmosis (one of the few methods able to generally remove dissolved components),particularly showing that arsenic in oxidation state +6 can be readily removed for discharge (<50×10-12 As),although additional ion exchange is needed for potable water (<10×10-12 As).

  13. Antioxidative properties of some phototropic microalgae grown in waste water

    DEFF Research Database (Denmark)

    Safafar, Hamed; Jacobsen, Charlotte; Møller, Peter

    for the screening and selection of the species. In this study,the potential antioxidant activities of 12 micro algal sample from Chlorella., Spirulina., Euglena, Scenedesmus and Haematococcus species grown in waste water in Kalundborg micro algal facilities were evaluated using three antioxidant assays, including...

  14. The Determination of Anionic Surfactants in Natural and Waste Waters.

    Science.gov (United States)

    Crisp, P. T.; And Others

    1983-01-01

    Background information, procedures, and results of an experiment suitable for measuring subpart per million concentrations of anionic surfactants in natural waters and waste effluents are provided. The experiment required only a spectrophotometer or filter photometer and has been successfully performed by students in an undergraduate environmental…

  15. Synthesis of hydroxytyrosyl alkyl ethers from olive oil waste waters

    OpenAIRE

    Juan Fernández-Bolaños; Mariana Trujillo; Guillermo Rodríguez; Raquel Mateos; Gema Pereira-Caro; Andrés Madrona; Espartero, José L.

    2009-01-01

    The preparation of a new type of derivatives of the naturally occurring antioxidant hydroxytyrosol is reported. Hydroxytyrosyl alkyl ethers were obtained in high yield by a three-step procedure starting from hydroxytyrosol isolated from olive oil waste waters. Preliminary results obtained by the Rancimat method have shown that these derivatives retain the high protective capacity of free hydroxytyrosol.

  16. Waste water treatment through public-private partnerships

    DEFF Research Database (Denmark)

    Carpintero, Samuel; Petersen, Ole Helby

    2014-01-01

    This paper analyses the experience of the regional government of Aragon (Spain) that has extensively used public-private partnerships for the construction and operation of waste water treatment plants. The paper argues that although overall the implementation of this PPP program might be considered...

  17. Synthesis of Hydroxytyrosyl Alkyl Ethers from Olive Oil Waste Waters

    Directory of Open Access Journals (Sweden)

    Juan Fernández-Bolaños

    2009-05-01

    Full Text Available The preparation of a new type of derivatives of the naturally occurring antioxidant hydroxytyrosol is reported. Hydroxytyrosyl alkyl ethers were obtained in high yield by a three-step procedure starting from hydroxytyrosol isolated from olive oil waste waters. Preliminary results obtained by the Rancimat method have shown that these derivatives retain the high protective capacity of free hydroxytyrosol.

  18. The Determination of Anionic Surfactants in Natural and Waste Waters.

    Science.gov (United States)

    Crisp, P. T.; And Others

    1983-01-01

    Background information, procedures, and results of an experiment suitable for measuring subpart per million concentrations of anionic surfactants in natural waters and waste effluents are provided. The experiment required only a spectrophotometer or filter photometer and has been successfully performed by students in an undergraduate environmental…

  19. Power from industrial waste waters; Energie aus Industrieabwaessern

    Energy Technology Data Exchange (ETDEWEB)

    Vith, Christian; Fischer, Peter; Wunsch, Michael; Koeppl, Stefan [Hager und Elsaesser GmbH, Stuttgart (Germany)

    2009-04-15

    Strongly loaded industrial waste waters contain an interesting energy potential. Even if high nitrogen concentrations are present beside a high organic freight, an ideal field of deployment results for the anaerobic pre-treatment. An energy-optimized processing can consist of a combination of fermentation gas production by means of methanization and a nitrogen release by means of deammonification.

  20. An Analysis of the Waste Water Treatment Operator Occupation.

    Science.gov (United States)

    Clark, Anthony B.; And Others

    The occupational analysis contains a brief job description for the waste water treatment occupations of operator and maintenance mechanic and 13 detailed task statements which specify job duties (tools, equipment, materials, objects acted upon, performance knowledge, safety considerations/hazards, decisions, cues, and errors) and learning skills…

  1. An Analysis of the Waste Water Treatment Maintenance Mechanic Occupation.

    Science.gov (United States)

    Clark, Anthony B.; And Others

    The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the waste water treatment mechanics occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Twelve duties are broken…

  2. Domestic applications for aerospace waste and water management technologies

    Science.gov (United States)

    Disanto, F.; Murray, R. W.

    1972-01-01

    Some of the aerospace developments in solid waste disposal and water purification, which are applicable to specific domestic problems are explored. Also provided is an overview of the management techniques used in defining the need, in utilizing the available tools, and in synthesizing a solution. Specifically, several water recovery processes will be compared for domestic applicability. Examples are filtration, distillation, catalytic oxidation, reverse osmosis, and electrodialysis. Solid disposal methods will be discussed, including chemical treatment, drying, incineration, and wet oxidation. The latest developments in reducing household water requirements and some concepts for reusing water will be outlined.

  3. Ionometric determination of chloride ion in circulating and waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Bebeshko, G.I.; Afanas' eva, V.I.; Danielova, I.I.; Dmitriev, M.A.; Radchenko, A.F.

    1986-09-01

    The authors attempt to develop selective ionometric methods to determine chloride ion in waste and circulating waters from technological ore processing, containing significant amounts of sulfide ion and various flotation reagents. These waters contain practically no cations that form hard to dissolve compounds with chloride ion such as Ag/sup +/, Cu/sup +/, Hg/sup +/ or Pb/sup 2 +/. The chloride ion concentration in water varies between 10 and 100 mg/liter. Information is shown on the concentration of the main anions and flotation reagents in waters that were analyzed.

  4. Wash water waste pretreatment system study

    Science.gov (United States)

    1976-01-01

    The use of real wash water had no adverse effect on soap removal when an Olive Leaf soap based system was used; 96 percent of the soap was removed using ferric chloride. Numerous chemical agents were evaluated as antifoams for synthetic wash water. Wash water surfactants used included Olive Leaf Soap, Ivory Soap, Neutrogena and Neutrogena Rain Bath Gel, Alipal CO-436, Aerosol 18, Miranol JEM, Palmeto, and Aerosol MA-80. For each type of soapy wash water evaluated, at least one antifoam capable of causing nonpersistent foam was identified. In general, the silicones and the heavy metal ions (i.e., ferric, aluminum, etc.) were the most effective antifoams. Required dosage was in the range of 50 to 200 ppm.

  5. Waste water discharge and its effect on the quality of water of Mahim creek and bay

    Digital Repository Service at National Institute of Oceanography (India)

    Zingde, M.D.; Desai, B.N.

    Coastal environment around Mahim was monitored to evaluate the effects of domestic and industrial waste water discharge in Mahim Creek, Maharashtra, India. Vertical salinity and DO gradient occasionally observed in the Mahim Bay during postmonsoon...

  6. Measurements of physical-chemical characteristics of dairy plant waste waters

    OpenAIRE

    Stefanović Dragoslav; Vojnović-Miloradov Mirjana; Lemić Jovan; Kurajica Milorad; Kovačević Dragana

    2008-01-01

    Characteristics of waste waters of the dairy industry are specific and differ essentially from waste waters of other branches of the food industry. The complexity of production in dairy plants with several units for different products render the problem of waste waters of this industry particularly complex. Waste waters of the AD Imlek dairy plant were sampled and their chemical characteristics were determined at different seasons of the year and at different times of the day in the years 200...

  7. Pilot-scale laboratory waste treatment by supercritical water oxidation.

    Science.gov (United States)

    Oshima, Yoshito; Hayashi, Rumiko; Yamamoto, Kazuo

    2006-01-01

    Supercritical water oxidation (SCWO) is a reaction in which organics in an aqueous solution can be oxidized by O2 to CO2 and H2O at a very high reaction rate. In 2003, The University of Tokyo constructed a facility for the SCWO process, the capacity of which is approximately 20 kl/year, for the purpose of treating organic laboratory waste. Through the operation of this facility, we have demonstrated that most of the organics in laboratory waste including halogenated organic compounds can be successfully treated without the formation of dioxines, suggesting that SCWO is useful as an alternative technology to the conventional incineration process.

  8. Textile effluent & waste water: a review

    OpenAIRE

    Mojsov, Kiro

    2013-01-01

    Textile processing is a growing industry that traditionally has used a lot of water, energy and harsh chemicals. Textile industries consume over 7 x 105tons of dyes annually and use up to 1 litre of water per kg of dye processed and arethird largest polluters in the world. As a characteristic of the textile processing industry, a wide range of structurally diverse dyes can be used in a single factory, and therefore effluents from the industry are extremely variable in composition. This needed...

  9. Processing of combined domestic bath and laundry waste waters for reuse as commode flushing water

    Science.gov (United States)

    Hypes, W. D.; Batten, C. E.; Wilkins, J. R.

    1975-01-01

    An experimental investigation of processes and system configurations for reclaiming combined bath and laundry waste waters for reuse as commode flush water was conducted. A 90-min recycle flow was effective in removing particulates and in improving other physical characteristics to the extent that the filtered water was subjectively acceptable for reuse. The addition of a charcoal filter resulted in noticeable improvements in color, turbidity, and suds elimination. Heating and chlorination of the waste waters were investigated for reducing total organism counts and eliminating coliform organisms. A temperature of 335.9 K (145 F) for 30 min and chlorine concentrations of 20 mg/l in the collection tank followed by 10 mg/l in the storage tank were determined to be adequate for this purpose. Water volume relationships and energy-use rates for the waste water reuse systems are also discussed.

  10. REVIEW OF EXISTING LCA STUDIES ON WASTE WATER TREATMENT TECHNOLOGIES

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    The EU research project “NEPTUNE” is related to the EU Water Framework Directive and focused on the development of new waste water treatment technologies (WWTT) for municipal waste water. The sustainability of these WWTTs is going to be assessed by the use of life cycle assessment (LCA). New life...... cycle impact assessment methods on pathogens, whole effluent toxicity and micropollutants will be developed within the project. As part of this work a review of more than 20 previous LCA studies on WWTTs has been done and the findings are summarised on this poster. The review is focused on the relative...... even more treatment trains/scenarios) have already been the subject of more or less detailed LCAs. All life cycle stages may be important and all impact categories (except stratospheric ozone depletion) typically included in LCAs may show significance depending on the actual scenario. Potential impacts...

  11. Olive oil waste waters: Controlled fermentation and materials recovery

    Energy Technology Data Exchange (ETDEWEB)

    Federici, F.; Montedoro, G.F.; Pozzi, V. (Tuscia Univ., Viterbo (Italy). Detp. di Agrobiologia e Agrochimica Perugia Univ. (Italy). Ist. di Industrie Agrarie UNIECO s.c.r.l., Reggio Emilia (Italy))

    Land and water pollution due to waste water and oils deriving from the processing of olives to produce oil represents a serious environmental problem for Spain, Italy and Greece. This paper reports and discusses the results (time dependent enzyme activity) of performance tests on an innovative fermentation process to be used in olive oil waste water anaerobic digestion. An outline is then given of a demonstration depolymerization/materials recovery (including polyphenols, enzymes, etc.) process scheme based on the the tested fermentation method. The fermentation process tests involved the use of an albidus yeast in an Applikon bench scale experimental device. Process parameters were varied to determine optimum fermentation conditions. The European Communities sponsored one cubic meter/day demonstration plant utilizes a preliminary treatment process based on the use of gelatin, bentonite and polyclar.

  12. Life cycle assessment of advanced waste water treatment

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, Peter Augusto

    .g. pharmaceuticals, heavy metals and endocrine disrupters). As part of this work a holistic based prioritisation among technologies and optimisations is to be done. Tools for this prioritisation include life cycle assessment (LCA) and cost/efficiency. The LCA is performed as a comparative LCA and the concept...... of induced impacts as compared to avoided impacts is introduced in the life cycle impact assessment (LCIA) part. Furthermore, as novel approaches, potential ecotoxicity impact from a high number of micropollutants and the potential impact from pathogens (and whole effluent toxicity) are to be included......The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e...

  13. 78 FR 64905 - Carriage of Conditionally Permitted Shale Gas Extraction Waste Water in Bulk

    Science.gov (United States)

    2013-10-30

    ... Waste Water in Bulk AGENCY: Coast Guard, DHS. ACTION: Notice of availability and request for comments... shale gas extraction waste water in bulk via barge, and invites public comment. The policy letter... endorsement or letter allowing the barge to transport shale gas extraction waste water in bulk. The...

  14. Annual Report of Airborne Discharge Station for Treated Radioactive Waste Water with Tritium in 2015

    Institute of Scientific and Technical Information of China (English)

    HAN; Yi-dan; FENG; Chun-xiao; LONG; Bo-kang; ZHAO; Yu-hang; WANG; Jian-xin

    2015-01-01

    The airborne discharge station for radioactive purity liquid waste water is officially put into operation in 2010,and it is the first facility for treated radioactive waste water with tritium in China.The station is primarily based on the"air humidification"principle for treated waste water

  15. [WASTE WATERS AS THE RESERVOIR OF INTESTINAL ENTERIC VIRAL INFECTIONS].

    Science.gov (United States)

    Nedachin, A E; Dmitrieva, R A; Doskina, T V; Dolgin, V A; Chulanov, V P; Pimenov, N N

    2015-01-01

    In the paper there are presented data of field observations of the spectrum of viruses, contained in the waste waters. The studies were performed on the territory of the city and the territory unfavorable for hepatitis A. In the territory of the big city by RT-PCR in the waste liquid the enterovirus RNA was detected in 45% of samples; astroviruses--90%; noroviruses--80% and 15% of rotaviruses. Samples from 2 wells were slightly positive for the presence of HCV RNA A. In the waste liquid on the territory, unfavorable for viral hepatitis A, in 100% of the samples there were determined noro- and astroviruses RNA and adenovirus DNA, in 75%--enterovirus RNA; 50%--HAV RNA and a 25%--rotavirus RNA.

  16. Methods of industrial waste water cleaning

    Directory of Open Access Journals (Sweden)

    Ján Brehuv

    2005-11-01

    Full Text Available The issue of „acid mine water“ (or AMD is well known in the world for some centuries. In the Eastern Slovakia, the most acid surface water occurs in the area of the old mine Smolník, which is closed and submerged for 15 years. The submitted contribution deals with the sulphateelimination at this locality. Recently, several methods of the sulphate-elimination from the mine water are applied. The best-known methods are the biological and physical-chemical oness and the chemical precipitation. The method described in this contribution deals with the chemical precipitation by polyaluminium chloride and calcium hydrate. By appliying of this method, very interesting results were obtained. The amount of SO42- anions decreased to almost zero-value, using optimal doses of the chemical reagents.

  17. Performance characterization of water recovery and water quality from chemical/organic waste products

    Science.gov (United States)

    Moses, W. M.; Rogers, T. D.; Chowdhury, H.; Cullingford, H. S.

    1989-01-01

    The water reclamation subsystems currently being evaluated for the Space Shuttle Freedom are briefly reviewed with emphasis on a waste water management system capable of processing wastes containing high concentrations of organic/inorganic materials. The process combines low temperature/pressure to vaporize water with high temperature catalytic oxidation to decompose volatile organics. The reclaimed water is of potable quality and has high potential for maintenance under sterile conditions. Results from preliminary experiments and modifications in process and equipment required to control reliability and repeatability of system operation are presented.

  18. Performance characterization of water recovery and water quality from chemical/organic waste products

    Science.gov (United States)

    Moses, W. M.; Rogers, T. D.; Chowdhury, H.; Cullingford, H. S.

    1989-01-01

    The water reclamation subsystems currently being evaluated for the Space Shuttle Freedom are briefly reviewed with emphasis on a waste water management system capable of processing wastes containing high concentrations of organic/inorganic materials. The process combines low temperature/pressure to vaporize water with high temperature catalytic oxidation to decompose volatile organics. The reclaimed water is of potable quality and has high potential for maintenance under sterile conditions. Results from preliminary experiments and modifications in process and equipment required to control reliability and repeatability of system operation are presented.

  19. Waste Not, Want Not: Role of Waste Generation, Management, and Treatment in Food-Energy-Water Nexus Interactions

    Science.gov (United States)

    Gunda, T.; Tidwell, V. C.

    2016-12-01

    While the food-water-energy (FEW) nexus framework has focused on the interactions between primary production and resource requirements (for example, water used to produce electricity), the waste component of these interactions has been largely overlooked. We use the electric utility industry as a case study to explore the burden posed by waste generation, management, and treatment. Using EPA datasets such as the Toxics Release Inventory, we quantify the current waste budget for the electric utility industry. Some aspects of generated waste from the electric utility industry are well-known (e.g., greenhouse gas emissions and criteria air pollutants). Others, however, such as discharges to water and associated water and energy requirements used for treatment are less understood. Overall, the electric industry accounts for 25% of all US air releases, 21% of surface water discharges, and 28% of all land releases. We conclude with a proposed framework to incorporate waste more systematically into the FEW dialogue.

  20. Engineered photocatalysts for detoxification of waste water

    Energy Technology Data Exchange (ETDEWEB)

    Majumder, S.A.; Prairie, M.R.; Shelnutt, J.A. [Sandia National Lab., Albuquerque, NM (United States); Khan, S.U.M. [Duquesne Univ., Pittsburgh, PA (United States). Dept. of Chemistry and Biochemistry] [and others

    1996-12-01

    This report describes progress on the development of engineered photocatalysts for the detoxification of water polluted with toxic organic compounds and heavy metals. We examined a range of different oxide supports (titania, alumina, magnesia and manganese dioxide) for tin uroporphyrin and investigated the efficacy of a few different porphyrins. A water-soluble octaacetic-acid-tetraphenylporphyrin and its derivatives have been synthesized and characterized in an attempt to design a porphyrin catalyst with a larger binding pocket. We have also investigated photocatalytic processes on both single crystal and powder forms of semiconducting SiC with an ultimate goal of developing a dual-semiconductor system combining TiO{sub 2} and SiC. Mathematical modeling was also performed to identify parameters that can improve the efficiency of SiC-based photocatalytic systems. Although the conceptual TiO{sub 2}/SiC photodiode shows some promises for photoreduction processes, SiC itself was found to be an inefficient photocatalyst when combined with TiO{sub 2}. Alternative semiconductors with bandgap and band potentials similar to SiC should be tested in the future for further development and a practical utilization of the dual photodiode concept.

  1. Treatment of waste thermal waters by ozonation and nanofiltration.

    Science.gov (United States)

    Kiss, Z L; Szép, A; Kertész, S; Hodúr, C; László, Z

    2013-01-01

    After their use for heating, e.g. in greenhouses, waste thermal waters may cause environmental problems due to their high contents of ions, and in some cases organic matter (associated with an oxygen demand) or toxic compounds. The aims of this work were to decrease the high organic content of waste thermal water by a combination of ozone treatment and membrane separation, and to investigate the accompanying membrane fouling. The results demonstrated that the chemical oxygen demand and the total organic content can be effectively decreased by a combination of ozone pretreatment and membrane filtration. Ozone treatment is more effective for phenol elimination than nanofiltration alone: with a combination of the two processes, 100% elimination efficiency can be achieved. The fouling index b proved to correlate well with the fouling and polarization layer resistances.

  2. Enzyme Activities in Waste Water and Activated Sludge

    DEFF Research Database (Denmark)

    Nybroe, Ole; Jørgensen, Per Elberg; Henze, Mogens

    1992-01-01

    The purpose of the present study was to evaluate the potential of selected enzyme activity assays to determine microbial abundance and heterotrophic activity in waste water and activated sludge. In waste water, esterase and dehydrogenase activities were found to correlate with microbial abundance...... measured as colony forming units of heterotrophic bacteria. A panel of four enzyme activity assays, α-glucosidase, alanine-aminopeptidase, esterase and dehydrogenase were used to characterize activated sludge and anaerobic hydrolysis sludge from a pilot scale plant. The enzymatic activity profiles were...... distinctly different, suggesting that microbial populations were different, or had different physiological properties, in the two types of sludge. Enzyme activity profiles in activated sludge from four full-scale plants seemed to be highly influenced by the composition of the inlet. Addition of hydrolysed...

  3. Special Analysis for the Disposal of the INL Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) Waste Stream at the Area 5 Radioactive Waste Management Site

    Energy Technology Data Exchange (ETDEWEB)

    Shott, Gregory [National Security Technologies, LLC, Las Vegas, NV (United States)

    2017-03-21

    This special analysis (SA) evaluates whether the Idaho National Laboratory (INL) Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) waste stream (INEL167203QR1, Revision 0) is suitable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS). Disposal of the INL Waste Associated with the Unirradiated LWBR waste meets all U.S. Department of Energy (DOE) Manual DOE M 435.1-1, “Radioactive Waste Management Manual,” Chapter IV, Section P performance objectives (DOE 1999). The INL Waste Associated with the Unirradiated LWBR waste stream is recommended for acceptance with the condition that the total uranium-233 (233U) inventory be limited to 2.7E13 Bq (7.2E2 Ci).

  4. Research of waste dump water mutagenicity of bacterial detection system SOS chromotest.

    Science.gov (United States)

    Vojtková, H; Janáková, I

    2011-01-01

    The paper deals with a possible use of the bacterial detection system of SOS chromotest to test mutagenicity of waste dump water checking the mutagenicity degree on real samples from Praksice waste dump, which is a controlled waste dump with mixed industrial, municipal and inert wastes. The waste dump surface water samples were taken from a no-name influent stream springing below the waste dump body between 2005 and 2009. After metabolic activation by microsomal fraction in vitro, medium to high mutagenicity was registered in all the samples. The SOS chromotest is assessed as an effective and economically acceptable method to check and determine the mutagenicity degree of contaminated water.

  5. Water Quality Management of Bilge Wastes at Pearl Harbor, Hawaii

    Science.gov (United States)

    1992-12-01

    has not been utilized on a full-scale to remove metals. Lankford and Eckenfelder reported that "reverse osmosis is not a currently (as of 1990...for treatment of concentrated low-volume waste streams" (Lankford and Eckenfelder 1990, 95). Therefore only a small amount of performance data on 48...and solvents (Lankford and Eckenfelder 1990, 96). * Dilution with non-contaminated/pure water will reduce the concentration of all pollutants in the

  6. Water state changes during the composting of kitchen waste.

    Science.gov (United States)

    Shen, Dong-Sheng; Yang, Yu-Qiang; Huang, Huan-Lin; Hu, Li-Fang; Long, Yu-Yang

    2015-04-01

    Changes in water states during the composting of kitchen waste were determined. Three experiments, R(55), R(60), and R(65), with different initial moisture contents, 55%, 60%, and 65%, respectively, were performed. Three water states, entrapped water (EW), capillary water (CW), and multiple-molecular-layer water (MMLW), were monitored during the experiments. Changes only occurred with the EW and CW during the composting process. The percentage of EW increased, and the percentage of CW decreased as the composting process progressed. The R(60) experiment performed better than the other experiments according to changes in the temperature and carbon-to-nitrogen ratio (C/N). The percentage of EW correlated well (P<0.05) with the dissolved organic carbon content (DOC), electrical conductivity (EC), pH, and C/N, and was affected by the hemicellulose and cellulose contents.

  7. Integrated water and waste management system for future spacecraft

    Science.gov (United States)

    Ingelfinger, A. L.; Murray, R. W.

    1974-01-01

    Over 200 days of continuous testing have been completed on an integrated waste management-water recovery system developed by General Electric under a jointly funded AEC/NASA/AF Contract. The 4 man system provides urine, feces, and trash collection; water reclamation; storage, heating and dispensing of the water; storage and disposal of the feces and urine residue and all of other nonmetallic waste material by incineration. The heat required for the 1200 deg F purification processes is provided by a single 420-w radioisotope heater. A second 836-w radioisotope heater supplemented by 720 w of electrical heat provides for distillation and water heating. Significant test results are no pre-or-post treatment, greater than 98 per cent potable water recovery, approximately 95 per cent reduction in solids weight and volume, all outflows are sterile with the water having no bacteria or virus, and the radioisotope capsule radiation level is only 7.9 mrem/hr unshielded at 1 m (neutrons and gamma).

  8. Simultaneous treatment of SO2 containing stack gases and waste water

    Science.gov (United States)

    Poradek, J. C.; Collins, D. D. (Inventor)

    1978-01-01

    A process for simultaneously removing sulfur dioxide from stack gases and the like and purifying waste water such as derived from domestic sewage is described. A portion of the gas stream and a portion of the waste water, the latter containing dissolved iron and having an acidic pH, are contacted in a closed loop gas-liquid scrubbing zone to effect absorption of the sulfur dioxide into the waste water. A second portion of the gas stream and a second portion of the waste water are controlled in an open loop gas-liquid scrubbing zone. The second portion of the waste water contains a lesser amount of iron than the first portion of the waste water. Contacting in the openloop scrubbing zone is sufficient to acidify the waste water which is then treated to remove solids originally present.

  9. Purification of metal electroplating waste waters using zeolites.

    Science.gov (United States)

    Alvarez-Ayuso, E; García-Sánchez, A; Querol, X

    2003-12-01

    The sorption behaviour of natural (clinoptilolite) and synthetic (NaP1) zeolites has been studied with respect to Cr(III), Ni(II), Zn(II), Cu(II) and Cd(II) in order to consider its application to purify metal finishing waste waters. The batch method has been employed using metal concentrations in solution ranged from 10 to 200 mg/l and solid/liquid ratios ranged from 2.5 to 10 g/l. The Langmuir model was found to describe well all sorption processes, allowing to establish metal sorption sequences from which the main retention mechanism involved for each metal has been inferred. Synthetic zeolite exhibited about 10 times greater sorption capacities (b(Cr)=0.838 mmol/g, b(Ni)=0.342 mmol/g, b(Zn)=0.499 mmol/g, b(Cu)=0.795 mmol/g, b(Cd)=0.452 mmol/g) than natural zeolite (b(Cr)=0.079 mmol/g, b(Ni)=0.034 mmol/g, b(Zn)=0.053 mmol/g, b(Cu)=0.093 mmol/g, b(Cd)=0.041 mmol/g), appearing, therefore, as most suitable to perform metal waste water purification processes. This mineral showed the same high sorption capacity values when used in the purification of metal electroplating waste waters.

  10. Chitosan on Reducing Chemical Oxygen Demands in Laundry Waste Water

    Directory of Open Access Journals (Sweden)

    Tri Joko

    2016-09-01

    Full Text Available Laundry liquid waste contains several chemical substances in detergent raw materials such as phosphate, surfactants, ammonia, and total suspended solids. The existence of detergent in high concentrations and exceeds the quality standards that have been estabilished in a body of water can lead to cases of enviromental pollution in the form of increased turbidity an Chemical Oxygen Demands (COD levels. Therefore in order to maintain and to ensure the availabillity of water in terms of quality, it requires coagulation-flocculation process to laundry liquid waste before discharging into water bodies. This study aims to determine the decrease of COD levels and turbidity level in laundry liquid waste using chitosan coagulant in “X” laundry, Tembalang District, Semarang. The research is a quasi experimental study with pretest-posttest with control group research design with 6 times replication. The total samples are 60 in wich 24 tested for the levels of turbidity and 6 controls. The test results of Kruskal-Wallis with significance p-value < 0,05 indicates that dosage variation (p=0,000 gives different levels of COD and dosage variation (p=0,000 provide 755,97 mg/l and the advantage levels of turbidity before treatment was 516,20 NTU. The optimum dosage of chitosan coagulant is on the dose of 200 mg/l with the effectiveness decrease of COD levels and turbidity levels on 72,67% an 98,67% respectively.

  11. Supercritical Water Process for the Chemical Recycling of Waste Plastics

    Science.gov (United States)

    Goto, Motonobu

    2010-11-01

    The development of chemical recycling of waste plastics by decomposition reactions in sub- and supercritical water is reviewed. Decomposition reactions proceed rapidly and selectively using supercritical fluids compared to conventional processes. Condensation polymerization plastics such as PET, nylon, and polyurethane, are relatively easily depolymerized to their monomers in supercritical water. The monomer components are recovered in high yield. Addition polymerization plastics such as phenol resin, epoxy resin, and polyethylene, are also decomposed to monomer components with or without catalysts. Recycling process of fiber reinforced plastics has been studied. Pilot scale or commercial scale plants have been developed and are operating with sub- and supercritical fluids.

  12. Anaerobic Digestion of the Organic Fraction of Municipal Solid Waste With Recirculation of Process Water

    DEFF Research Database (Denmark)

    Hartmann, H.; Angelidaki, Irini; Ahring, Birgitte Kiær

    2001-01-01

    A new concept of a wet anaerobic digestion treatment of the organic fraction of municipal solid waste (OFMSW) is investigated. Once the waste is diluted with water, the entire liquid fraction of the effluent is recirculated and used as process water for dilution of the waste. This enables a well...

  13. Solubility effects in waste-glass/demineralized-water systems

    Energy Technology Data Exchange (ETDEWEB)

    Fullam, H.T.

    1981-06-01

    Aqueous systems involving demineralized water and four glass compositions (including standins for actinides and fission products) at temperatures of up to 150/sup 0/C were studied. Two methods were used to measure the solubility of glass components in demineralized water. One method involved approaching equilibrium from subsaturation, while the second method involved approaching equilibrium from supersaturation. The aqueous solutions were analyzed by induction-coupled plasma spectrometry (ICP). Uranium was determined using a Scintrex U-A3 uranium analyzer and zinc and cesium were determined by atomic absorption. The system that results when a waste glass is contacted with demineralized water is a complex one. The two methods used to determine the solubility limits gave very different results, with the supersaturation method yielding much higher solution concentrations than the subsaturation method for most of the elements present in the waste glasses. The results show that it is impossible to assign solubility limits to the various glass components without thoroughly describing the glass-water systems. This includes not only defining the glass type and solution temperature, but also the glass surface area-to-water volume ratio (S/V) of the system and the complete thermal history of the system. 21 figures, 22 tables. (DLC)

  14. Determination of estrogenic potential in waste water without sample extraction.

    Science.gov (United States)

    Avberšek, Miha; Žegura, Bojana; Filipič, Metka; Uranjek-Ževart, Nataša; Heath, Ester

    2013-09-15

    This study describes the modification of the ER-Calux assay for testing water samples without sample extraction (NE-(ER-Calux) assay). The results are compared to those obtained with ER-Calux assay and a theoretical estrogenic potential obtained by GC-MSD. For spiked tap and waste water samples there was no statistical difference between estrogenic potentials obtained by the three methods. Application of NE-(ER-Calux) to "real" influent and effluents from municipal waste water treatment plants and receiving surface waters found that the NE-(ER-Calux) assay gave higher values compared to ER-Calux assay and GC-MSD. This is explained by the presence of water soluble endocrine agonists that are usually removed during extraction. Intraday dynamics of the estrogenic potential of a WWTP influent and effluent revealed an increase in the estrogenic potential of the influent from 12.9 ng(EEQ)/L in the morning to a peak value of 40.0 ng(EEQ)/L in the afternoon. The estrogenic potential of the effluent was

  15. Environmentally-friendly waste water treatment: Removal of ammonium nitrogen and hydrogen sulfide from oil refinery waste water

    Energy Technology Data Exchange (ETDEWEB)

    Stein, C.; Heine, I.; Sachse, J.; Peper, H. [Holborn Europa Raffinerie GmbH, Hamburg (Germany); Elster, J.

    1998-12-01

    The Holborn Europa Raffinerie (HER) in Hamburg, Germany, achieved a drastic reduction in water and air pollutants by implementation of a two step project. The first step was a modification of the H{sub 2}S-stripping of process water, which resulted ultimately in shutting down the H{sub 2}S-incinerator and conversion of the recovered H{sub 2}S to saleable elementary sulfur. Atmospheric pollution was reduced accordingly by 650 t/a SO{sub 2} and 2,200 t/a CO{sub 2}. In compliance with waste water legislation (requirements of Appendix 45, Waste Water Administrative Regulation), the ammonium nitrogen content of refinery waste water was reduced significantly in a second step. In contrast to the common biological treatment used in many refineries, it was decided to concentrate on physico-chemical treatment of the highly contaminated partstream only. To this end ammonia is effectively stripped out of the partstream under alkaline conditions, and concentrated to a 10% aqueous solution by distillation under reflux. This solution is then injected into the hot vent gas stream of the FCC-regenerator (CO-Boiler) as an NO{sub x} reduction agent, and thus disposed of in an environmentall-friendly manner. The introduction of this combination of field proven processes, namely water treatment by steam stripping and NO{sub x} reduction via SNCR, received government grant support and reduced water pollution by 250 t/a ammonium nitrogen and air pollution by 180 t/a NO{sub x}. In view of the relatively low investment and operating costs, enhanced flexibility of the existing biological water treatment plant, avoidance of additional material waste and drastic reduction of overall refinery emission, the adopted scheme is most certainly a prime example of both economical and ecological optimisation. The scheme also has future potential arising from the projected tightening up in motor fuels specifications (EU specifications for years 2000 and 2005) which will necessitate increased use of

  16. Water Footprint Assessment in Waste Water Treatment Plant: Indicator of the sustainability of urban water cycle.

    Science.gov (United States)

    Gómez Llanos, Eva; Durán Barroso, Pablo; Matías Sánchez, Agustín; Fernández Rodríguez, Santiago; Guzmán Caballero, Raúl

    2017-04-01

    The seventeen Sustainable Development Goals (SDG) represent a challenge for citizens and countries around the world by working together to reduce social inequality, to fight poverty and climate change. The Goal six water and sanitation aims for ensuring, among others, the protection and restoration of water-related ecosystem (target 6.6) and encouraging the water use efficiency (target 6.3). The commitment to this goal is not only the development of sanitation infrastructure, but also incorporates the necessity of a sustainable and efficient management from ecological and economic perspectives. Following this approach, we propose a framework for assessing the waste water treatment plant (WWTP) management based on the Water Footprint (WF) principles. The WF as indicator is able to highlight the beneficial role of WWTPs within the environment and provide a complementary information to evaluate the impact of a WWTP regarding to the use of freshwater and energy. Therefore, the footprint family provides an opportunity to relate the reduction of pollutant load in a WWTP and the associated consumptions in terms of electricity and chemical products. As a consequence, the new methodology allows a better understanding of the interactions among water and energy resources, economic requirements and environmental risks. Because of this, the current technologies can be improved and innovative solutions for monitoring and management of urban water use can be integrated. The WF was calculated in four different WWTP located in the North East of Extremadura (SW Spain) which have activated sludge process as secondary treatment. This zone is characterized by low population density but an incipient tourism development. The WF estimation and its relationship with the electricity consumption examines the efficiency of each WWTP and identifies the weak points in the management in terms of the sustainability. Consequently, the WF establishes a benchmark for multidisciplinary decision

  17. Genotoxicity and Mutagenicity of Suspended Particulate Matter of River Water and Waste Water Samples

    Directory of Open Access Journals (Sweden)

    Georg Reifferscheid

    2002-01-01

    Full Text Available Suspended particulate matter of samples of river water and waste water treatment plants was tested for genotoxicity and mutagenicity using the standardized umu assay and two versions of the Ames microsuspension assay. The study tries to determine the entire DNA-damaging potential of the water samples and the distribution of DNA-damaging substances among the liquid phase and solid phase. Responsiveness and sensitivity of the bioassays are compared.

  18. Utilization of VAE Waste Water and Waste Residue%VAE废水和废渣的利用

    Institute of Scientific and Technical Information of China (English)

    刘红卫

    2000-01-01

    the situation of VAE waste water and waste residue applied in the process of paints, adhesive, modified cement, thermal insulation materials is introduced in this paper.%介绍了VAE废水和废渣在涂料、粘合剂、水泥改性以及保温材料加工中的应用情况。

  19. The chemical/physical and microbiological characteristics of typical bath and laundry waste waters. [waste water reclamation during manned space flight

    Science.gov (United States)

    Hypes, W. D.; Batten, C. E.; Wilkins, J. R.

    1974-01-01

    Chemical/physical and microbiological characteristics are studied of typical bath and laundry waters collected during a 12 day test in which the untreated waste waters were reused for toilet flush. Most significant changes were found for ammonia, color, methylene blue active substances, phosphates, sodium, sulfates, total organic carbon, total solids, and turbidity in comparison with tap water baseline. The mean total number of microorganisms detected in the waste waters ranged from 1 million to 10 to the 7th power cells/m1 and the mean number of possible coliforms ranged from 10 to the 5th power to 1 million. An accumulation of particulates and an objectible odor were detected in the tankage used during the 12 day reuse of the untreated waste waters. The combined bath and laundry waste waters from a family of four provided 91 percent of the toilet flush water for the same family.

  20. Autotrophic nitrogen removal from low strength waste water at low temperature.

    Science.gov (United States)

    Hendrickx, Tim L G; Wang, Yang; Kampman, Christel; Zeeman, Grietje; Temmink, Hardy; Buisman, Cees J N

    2012-05-01

    Direct anaerobic treatment of municipal waste waters allows for energy recovery in the form of biogas. A further decrease in the energy requirement for waste water treatment can be achieved by removing the ammonium in the anaerobic effluent with an autotrophic process, such as anammox. Until now, anammox has mainly been used for treating warm (>30 °C) and concentrated (>500 mg N/L) waste streams. Application in the water line of municipal waste water treatment poses the challenges of a lower nitrogen concentration (water line at a municipal waste water treatment plant. Combining direct anaerobic treatment with autotrophic nitrogen removal opens opportunities for energy-efficient treatment of municipal waste waters. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. Case study of the effectiveness of passive grease trap for management on domestic kitchen waste water

    Science.gov (United States)

    Nidzamuddin, M. Y.; Juffrizal, K.; Mustapha, F.; Zulfattah, Z. M.; Tan, C. F.; Taha, M. M.; Hidayah, I.; Hilwa, M. Z.

    2015-05-01

    Household waste, generally known as trash or garbage is mostly includes food wastes, product packaging, and other miscellaneous inorganic wastes that are coming from domestic household. Grease waste such as oil and fats can contaminate water and also clot on pipes provoking blockages. Thus, waste water from kitchen sink need a proper way of filtration. Grease trap developed in this paper is viable in trapping the grease residue. The experiments have been conducted in controlled environment and the objectives are to investigate the effectiveness of grease trap by proving the existence of retention time and the expected ratio of collected water and oil during experiment process using a prototype model.

  2. Subcritical and supercritical water oxidation of CELSS model wastes

    Science.gov (United States)

    Takahashi, Y.; Wydeven, T.; Koo, C.

    1989-01-01

    A mixture of ammonium hydroxide with acetic acid and a slurry of human feces, urine, and wipes were used as CELSS model wastes to be wet-oxidized at temperatures from 250 to 500 C, i.e. below and above the critical point of water (374 C and 218 kg/sq cm or 21.4 MPa). The effects of oxidation temperature ( 250-500 C) and residence time (0-120 mn) on carbon and nitrogen and on metal corrosion from the reactor material were studied. Almost all of the organic matter in the model wastes was oxidized in the temperature range from 400 to 500 C, above the critical conditions for water. In contrast, only a small portion of the organic matter was oxidized at subcritical conditions. A substantial amount of nitrogen remained in solution in the form of ammonia at temperatures ranging from 350 to 450 C suggesting that, around 400 C, organic carbon is completely oxidized and most of the nitrogen is retained in solution. The Hastelloy C-276 alloy reactor corroded during subcritical and supercritical water oxidation.

  3. Removal of Aluminum from Water and Industrial Waste Water

    Directory of Open Access Journals (Sweden)

    Parisa Ghashghaiee pour

    2014-09-01

    Full Text Available This study attempts to introduce a procedure to remove Aluminum ions from drinking water and industrial effluents by using active carbon with different grading as absorbent. Absorption of Aluminum ions were discussed in different conditions of Aluminum concentration, contact time, impact of electrolytes and pH on Aluminum ions absorbency. Both Freundlich and Langmuir isotherms used to investigate the adsorption. Thermodynamics relations governing process, such as specification of ( , ( and the enthalpy of adsorption, were calculated, which showed that Aluminum absorption on active carbon is an endothermic and spontaneous process.

  4. Integrated water management system - Description and test results. [for Space Station waste water processing

    Science.gov (United States)

    Elden, N. C.; Winkler, H. E.; Price, D. F.; Reysa, R. P.

    1983-01-01

    Water recovery subsystems are being tested at the NASA Lyndon B. Johnson Space Center for Space Station use to process waste water generated from urine and wash water collection facilities. These subsystems are being integrated into a water management system that will incorporate wash water and urine processing through the use of hyperfiltration and vapor compression distillation subsystems. Other hardware in the water management system includes a whole body shower, a clothes washing facility, a urine collection and pretreatment unit, a recovered water post-treatment system, and a water quality monitor. This paper describes the integrated test configuration, pertinent performance data, and feasibility and design compatibility conclusions of the integrated water management system.

  5. Integrated water management system - Description and test results. [for Space Station waste water processing

    Science.gov (United States)

    Elden, N. C.; Winkler, H. E.; Price, D. F.; Reysa, R. P.

    1983-01-01

    Water recovery subsystems are being tested at the NASA Lyndon B. Johnson Space Center for Space Station use to process waste water generated from urine and wash water collection facilities. These subsystems are being integrated into a water management system that will incorporate wash water and urine processing through the use of hyperfiltration and vapor compression distillation subsystems. Other hardware in the water management system includes a whole body shower, a clothes washing facility, a urine collection and pretreatment unit, a recovered water post-treatment system, and a water quality monitor. This paper describes the integrated test configuration, pertinent performance data, and feasibility and design compatibility conclusions of the integrated water management system.

  6. Heavy metal removal from waste waters by ion flotation.

    Science.gov (United States)

    Polat, H; Erdogan, D

    2007-09-05

    Flotation studies were carried out to investigate the removal of heavy metals such as copper (II), zinc (II), chromium (III) and silver (I) from waste waters. Various parameters such as pH, collector and frother concentrations and airflow rate were tested to determine the optimum flotation conditions. Sodium dodecyl sulfate and hexadecyltrimethyl ammonium bromide were used as collectors. Ethanol and methyl isobutyl carbinol (MIBC) were used as frothers. Metal removal reached about 74% under optimum conditions at low pH. At basic pH it became as high as 90%, probably due to the contribution from the flotation of metal precipitates.

  7. Utilization of immobilized urease for waste water treatment

    Science.gov (United States)

    Husted, R. R.

    1974-01-01

    The feasibility of using immobilized urease for urea removal from waste water for space system applications is considered, specifically the elimination of the urea toxicity problem in a 30-day Orbiting Frog Otolith (OFO) flight experiment. Because urease catalyzes the hydrolysis of urea to ammonia and carbon dioxide, control of their concentrations within nontoxic limits was also determined. The results of this study led to the use of free urease in lieu of the immobilized urease for controlling urea concentrations. An ion exchange resin was used which reduced the NH3 level by 94% while reducing the sodium ion concentration only 10%.

  8. Waste water treatment through public-private partnerships

    DEFF Research Database (Denmark)

    Carpintero, Samuel; Petersen, Ole Helby

    2014-01-01

    This paper analyses the experience of the regional government of Aragon (Spain) that has extensively used public-private partnerships for the construction and operation of waste water treatment plants. The paper argues that although overall the implementation of this PPP program might be considered...... allocation of some tasks. The paper also illustrates two features of this PPP program that arguably have strongly influenced its successful implementation: The mitigation of demand risk and the rigorous estimations of demand carried out by the regional government...

  9. Feasibility Studies on Static Pile Co Composting of Organic Fraction of Municipal Solid Waste With Dairy Waste Water

    Directory of Open Access Journals (Sweden)

    Manjula Gopinathan

    2012-06-01

    Full Text Available Milk processing consumes a large amount of water and generates 6–10 liters of effluent per liter of milk processed. An effluent volume is approximately four times the volume of processed milk. Since the pollutants generated by industry are great losses of production, improvements in production efficiency are recommended to reduce pollutant loads. In this research a series of experimental studies were conducted with regard to bioconversion of organic fraction of municipal solid waste along with dairy waste water at different C/N ratios. About 50 kg of shredded waste containing dairy waste water, saw dust, and organic fraction of municipal solid waste was placed in static piles of different proportions and 500 ml of effective micro-organisms was added to them. The variation in physical and chemical parameters was monitored throughout the process. Results indicate that co composting of dairy waste water with municipal solid waste produces compost that is more stable and homogenous and can be effectively used as soil conditioner.DOI: http://dx.doi.org/10.5755/j01.erem.60.2.963

  10. Diversity and antibiotic resistance of Aeromonas spp. in drinking and waste water treatment plants.

    Science.gov (United States)

    Figueira, Vânia; Vaz-Moreira, Ivone; Silva, Márcia; Manaia, Célia M

    2011-11-01

    The taxonomic diversity and antibiotic resistance phenotypes of aeromonads were examined in samples from drinking and waste water treatment plants (surface, ground and disinfected water in a drinking water treatment plant, and raw and treated waste water) and tap water. Bacteria identification and intra-species variation were determined based on the analysis of the 16S rRNA, gyrB and cpn60 gene sequences. Resistance phenotypes were determined using the disc diffusion method. Aeromonas veronii prevailed in raw surface water, Aeromonas hydrophyla in ozonated water, and Aeromonas media and Aeromonas puntacta in waste water. No aeromonads were detected in ground water, after the chlorination tank or in tap water. Resistance to ceftazidime or meropenem was detected in isolates from the drinking water treatment plant and waste water isolates were intrinsically resistant to nalidixic acid. Most of the times, quinolone resistance was associated with the gyrA mutation in serine 83. The gene qnrS, but not the genes qnrA, B, C, D or qepA, was detected in both surface and waste water isolates. The gene aac(6')-ib-cr was detected in different waste water strains isolated in the presence of ciprofloxacin. Both quinolone resistance genes were detected only in the species A. media. This is the first study tracking antimicrobial resistance in aeromonads in drinking, tap and waste water and the importance of these bacteria as vectors of resistance in aquatic environments is discussed.

  11. 77 FR 6548 - Environmental Impact Statement for the Implementation of Energy, Water, and Solid Waste...

    Science.gov (United States)

    2012-02-08

    ... implementation of the Energy, Water, and Solid Waste Initiatives at Fort Bliss. These initiatives will work to... waste reduction, and energy and water conservation policies and practices; (2) the construction of a new... Department of the Army Environmental Impact Statement for the Implementation of Energy, Water, and Solid...

  12. PHOTOCATALYTIC DEGRADATION OF WASTE WATER ON. THIN FILMS OF TiO2

    Institute of Scientific and Technical Information of China (English)

    Wu Zhenghuang

    2001-01-01

    The degradation of organic phosphorous pesticide waste water using thin films of TiO2, which was prepared in an atmospheric vertical chemical vapor deposition system, was studied. The results show that the wafer material for coating TiO2, the photocatalytic time, the TiO2 crystal phase, the pH value and the concentration of pesticides in waste water influence the degradation rate. These facts indicate some potential for photocatalytic treatment of waste water by utilizing sunlight.

  13. Lipid profiling of some authotrophic microalgae grown on waste water

    DEFF Research Database (Denmark)

    Safafar, Hamed; Jacobsen, Charlotte; Møller, Per

    Microalgae can be a new source of lipids for the aquaculture industry. Moreover, their potential as natural sources of antioxidants has gained recent attention. About 40 species of microalgae are used in aquaculture worldwide. A full characterization of lipid components is critical for selecting...... the most suitable microalgae and downstream processing for food and feed production. The present study is part of a big project funded by GUDP (green development and demonstration program of ministry of agriculture and fisheries of Denmark) which aims at developing new processing technologies, so...... that microalgae-biomass can be used as an alternative valuable resource in fish feed. In this work, 10 fresh water and marine microalgae from Chlorella, Scenedesmus, Haematococcus, Nannochloropsis, Nannochloropsis and Dunialiella species grown in waste water in Kalundborg micro algal facility were harvested...

  14. REVIEW ON NATURAL METHODS FOR WASTE WATER TREATMENT

    Directory of Open Access Journals (Sweden)

    Ashwani Kumar Dubey

    2014-01-01

    Full Text Available In Ethiopia, the most common method of disposal of waste water is by land spreading. This treatment method has numerous problems, namely high labor requirements and the potential for eutrophication of surface an d ground waters. Constructed wetlands are commonl y used for treatment of seconda ry municipal wastewaters and they have been gaining popularity for treatment of agricultural wastewaters in Ethiopia. Intermittent sand filtration may offer an alternative to traditional treatment methods. As well as providing comparable treatment performance, they also have a smaller footprint, due to the substantially higher organic loading rates that may be applied to their surfaces. Th is paper discusses the performance and design criteria of constructed wetlands for the treatment of domestic and agricultural wastewater, and sand filters for the treatment of domestic wastewater. It also proposes sand filtration as an alt ernative treatment mechanism for agricultural wa stewater and suggests design guide lines.

  15. ELECTRICITY PRODUCTION FROM WASTE WATER USING MICROBIAL FUEL CELL

    Directory of Open Access Journals (Sweden)

    Mannarreddy Prabu

    2012-09-01

    Full Text Available Microbial fuel cells (MFCs an electricity producing device using waste-water treatment, biosensor, eco-friendly and low cost management of energy production. In this study, investigation power generation from waste water compared with their pure culture, mixed culture and different medium ingredients with microorganism. Enhance the power production with different ingredients like monosaccharide’s, nitrogen source and amino acids, these sources increasing the electron shuttle in the medium. Glucose (0.98 V, beef extract (0.85 V and Leucine (0.92 V exhibited maximum power production with the anodic chamber. Different electrode was used; platinum showed that maximum electron capturing in the anodic chamber. The SEM photography clearly showed that biofilm formation of microorganism on the electrode. The output power was compared with mixed culture to pure culture and different ingredients, thus bio electric power was retained maximum 1.03 V in pure culture from Morganella morganii and 1.2 V in mixed culture.

  16. Effect of textile waste water on tomato plant, Lycopersicon esculentum.

    Science.gov (United States)

    Marwari, Richa; Khan, T I

    2012-09-01

    In this study Sanganer town, Jaipur was selected as study area. The plants of Lycopersicon esculentum var. K 21(Tomato) treated with 20 and 30% textile wastewater were analyzed for metal accumulation, growth and biochemical parameters at per, peak and post flowering stages. Findings of the study revealed that chlorophyll content was most severely affected with the increase in metal concentration. Total chlorophyll content showed a reduction of 72.44% while carbohydrate, protein and nitrogen content showed a reduction of 46.83, 71.65 and 71.65% respectively. With the increase in waste water treatment the root and shoot length, root and shoot dry weight and total dry weight were reduced to 50.55, 52.06, 69.93, 72.42, 72.10% respectively. After crop harvesting, the fruit samples of the plants treated with highest concentration of textile waste water contained 2.570 mg g(-1)d.wt. of Zn, 0.800 mg g(-1) d.wt. Cu, 1.520 mg g(-1) d.wt. Cr and 2.010 mg g(-1) d.wt. Pb.

  17. Biological waste-water treatment of azo dyes

    Energy Technology Data Exchange (ETDEWEB)

    Shaul, G.M.; Dempsey, C.R.; Dostal, K.A.

    1988-05-01

    The U.S. Environmental Protection Agency's (EPA) Office of Toxic Substances evaluates existing chemicals under Section 4 of the Toxic Substances Control Act (TSCA) and Premanufacture Notification (PMN) submissions under Section 5 of TSCA. Azo dyes constitute a significant portion of these PMN submissions and specific azo dyes have recently been added to the priority list for considerations in the development of test rules under Section 4. Azo dyes are of concern because some of the dyes, dye precurors, and/or their degradation products such as aromatic amines (which are also dye precurors) have been shown to be, or are suspected to be, carcinogenic. The fate of azo dyes in biological waste-water treatment systems was studied to aid in the review of PMN submissions and to assist in the possible development of test rules. Results from extensive pilot-scale activated-sludge process testing for 18 azo dyes are presented. Results from fate studies of C.I. Disperse Blue 79 in aerobic and anaerobic waste-water treatment will also be presented.

  18. Treatment of waste waters from special laundries of Czechoslovak nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seidl, K. (Ustav Jaderneho Vyzkumu CSKAE, Rez (Czechoslovakia))

    1982-01-01

    Waste water treatment methods applied in the purification of waste waters discharged from the laundries are presented. The most usually applied method is vaporization, the most frequently designed procedure is reverse osmosis and ultrafiltration and coagulation. Currently the Nuclear Research Institute in Rez is developing a technology of waste water purification which is aimed at introducing such a method of processing in which a minimum amount of solid wastes will be generated at minimum costs. From the point of view of waste water treatment it is most suitable to wash with soap with an addition of detergent such as sodium alkylaryl sulphonate. A promising preparation is the ROMY suspension. Waste water treatment with the use of coagulation by lime salt, sorption of the residues of organic substances on activated coal and of radionuclide residues on a selective ion exchanger without regeneration should be a sufficiently low-cost and effective technology.

  19. Water recovery and solid waste processing for aerospace and domestic applications. Volume 1: Final report

    Science.gov (United States)

    Murray, R. W.

    1973-01-01

    A comprehensive study of advanced water recovery and solid waste processing techniques employed in both aerospace and domestic or commercial applications is reported. A systems approach was used to synthesize a prototype system design of an advanced water treatment/waste processing system. Household water use characteristics were studied and modified through the use of low water use devices and a limited amount of water reuse. This modified household system was then used as a baseline system for development of several water treatment waste processing systems employing advanced techniques. A hybrid of these systems was next developed and a preliminary design was generated to define system and hardware functions.

  20. Utilization of Waste Materials for the Treatment of Waste Water Contaminated with Sulphamethoxazole.

    Science.gov (United States)

    Kurup, Lisha

    2014-01-01

    The activities were carried out to develop potential adsorbents from waste material and employ them for the removal of hazardous antibacterial, Sulphamethoxazole from the wastewater by adsorption technique. The selection of this method was done because of its economic viability. The method has the potency of eradicating the perilous chemicals which make their appearance in water and directly or indirectly into the whole biological system, through the ejection of effluents by the industries in flowing water. The adsorption technique was used to impound the precarious antibiotics from wastewater using Deoiled Soya an agricultural waste and Water Hyacinth a prolific colonizer. The adsorption capacity of these adsorbents was further enhanced by treating them with sodium hydroxide solution and it was seen that the adsorption capacity increases by 10% to 25%. Hence a comparative account of the adsorption studies of all the four adsorbents i.e. Deoiled Soya, Alkali treated Deoiled Soya, Water Hyacinth and Alkali treated Water Hyacinth has been discussed in this paper. Different isotherms like Freundlich, Langmuir and Dubinin Radushkevich were also deduced from the adsorption data. Isotherm studies were in turn used in estimating the thermodynamic parameters. Deoiled Soya (DOS) showed sorption capacity of 0.0007 mol g(-1) while Alkali treated Deoiled Soya (ADOS) exhibited 0.0011 mol g(-1) of sorption capacity which reveals that the adsorption is higher in case of alkali treated adsorbent. The mean sorption energy (E) was obtained between 9 to 12 kJ/mol which shows that the reaction proceeds by ion exchange reaction. Various kinetic studies like order of reaction, mass transfer studies, mechanism of diffusion were also performed for the ongoing processes. The mass transfer coefficient obtained for alkali treated moieties was higher than the parent moieties. The breakthrough curves plotted from the column studies show percentage saturation of 90% to 98%. Moreover the

  1. Waste storage in the vadose zone affected by water vapor condensation and leaching

    Energy Technology Data Exchange (ETDEWEB)

    Cary, J.W.; Gee, G.W.; Whyatt, G.A.

    1990-08-01

    One of the major concerns associated with waste storage in the vadose zone is that toxic materials may somehow be leached and transported by advecting water down to the water table and reach the accessible environment through either a well or discharge to a river. Consequently, care is taken to provide barriers over and around the storage sites to reduce contact between infiltrating water and the buried waste form. In some cases, it is important to consider the intrusion of water vapor as well as water in the liquid phase. Water vapor diffuses through porous material along vapor pressure gradients. A slightly low temperature, or the presence of water-soluble components in the waste, favors water condensation resulting in leaching of the waste form and advection of water-soluble components to the water table. A simple analysis is presented that allows one to estimate the rate of vapor condensation as a function of waste composition and backfill materials. An example using a waste form surrounded by concrete and gravel layers is presented. The use of thermal gradients to offset condensation effects of water-soluble components in the waste form is discussed. Thermal gradients may be controlled by design factors that alter the atmospheric energy exchange across the soil surface or that interrupt the geothermal heat field. 7 refs., 2 figs., 1 tab.

  2. Disaggregating Hot Water Use and Predicting Hot Water Waste in Five Test Homes

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, Hugh [ARIES Collaborative, New York, NY (United States); Wade, Jeremy [ARIES Collaborative, New York, NY (United States)

    2014-04-01

    While it is important to make the equipment (or "plant") in a residential hot water system more efficient, the hot water distribution system also affects overall system performance and energy use. Energy wasted in heating water that is not used is estimated to be on the order of 10%-30% of total domestic hot water (DHW) energy use. This field monitoring project installed temperature sensors on the distribution piping (on trunks and near fixtures) in five houses near Syracuse, NY, and programmed a data logger to collect data at 5 second intervals whenever there was a hot water draw. This data was used to assign hot water draws to specific end uses in the home as well as to determine the portion of each hot water that was deemed useful (i.e., above a temperature threshold at the fixture). Overall, the procedures to assign water draws to each end use were able to successfully assign about 50% of the water draws, but these assigned draws accounted for about 95% of the total hot water use in each home. The amount of hot water deemed as useful ranged from low of 75% at one house to a high of 91% in another. At three of the houses, new water heaters and distribution improvements were implemented during the monitoring period and the impact of these improvements on hot water use and delivery efficiency were evaluated.

  3. Disaggregating Hot Water Use and Predicting Hot Water Waste in Five Test Homes

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, H.; Wade, J.

    2014-04-01

    While it is important to make the equipment (or 'plant') in a residential hot water system more efficient, the hot water distribution system also affects overall system performance and energy use. Energy wasted in heating water that is not used is estimated to be on the order of 10 to 30 percent of total domestic hot water (DHW) energy use. This field monitoring project installed temperature sensors on the distribution piping (on trunks and near fixtures) and programmed a data logger to collect data at 5 second intervals whenever there was a hot water draw. This data was used to assign hot water draws to specific end uses in the home as well as to determine the portion of each hot water that was deemed useful (i.e., above a temperature threshold at the fixture). Five houses near Syracuse NY were monitored. Overall, the procedures to assign water draws to each end use were able to successfully assign about 50% of the water draws, but these assigned draws accounted for about 95% of the total hot water use in each home. The amount of hot water deemed as useful ranged from low of 75% at one house to a high of 91% in another. At three of the houses, new water heaters and distribution improvements were implemented during the monitoring period and the impact of these improvements on hot water use and delivery efficiency were evaluated.

  4. Energy efficiency in the waste water system; Energieeffizienz im Abwasserbereich

    Energy Technology Data Exchange (ETDEWEB)

    Panckow, Kathrin; Wienke, Andreas (comps.)

    2008-08-15

    The volume 51 of the publication series of the Municipal Environmental Campaign U.A.N. (Hannover, Federal Republic of Germany) reports on the energy efficiency in the waste water section. This volume consists of the following contributions: (a) How much energy is necessary for the sewage plant? (Artur Mennerich); (b) Possibilities of energy saving in the sewer system (Wolfgang Buehler); (c) Possibilities of energy saving at sewage plants: a Survey (Ulf Theilen); (d) Possibilities of energy saving at sewage plants: Examples from the practice (Wilfried Osterloh); (e) Review of the possibilities of power generation at sewage plants (K.-H. Rosenwinkel, Linda Hinken); (f) Potentials of production and utilization of fouling gas (Johannes Mueller); (g) Realisation of a 5 MW biological gas facility with waste heat utilization for sewage sludge drying (Marc Stueben); (h) The micro gas turbine: An alternative for the compact cogeneration plant (Christian Schaum); (i) PR report: Energy efficiency - (rational utilization of energy), energy concepts - (analysis of energy, strategic perspectives) (Martin Mergelmeyer, Gerhard Seibert-Erling).

  5. Sensitivity analysis of the waste composition and water content parameters on the biogas production models on solid waste landfills

    Science.gov (United States)

    Rodrigo-Ilarri, Javier; Segura-Sobrino, Francisco; Rodrigo-Clavero, Maria-Elena

    2014-05-01

    Landfills are commonly used as the final deposit of urban solid waste. Despite the waste is previously processed on a treatment plant, the final amount of organic matter which reaches the landfill is large however. The biodegradation of this organic matter forms a mixture of greenhouse gases (essentially Methane and Carbon-Dioxide as well as Ammonia and Hydrogen Sulfide). From the environmental point of view, solid waste landfills are therefore considered to be one of the main greenhouse gas sources. Different mathematical models are usually applied to predict the amount of biogas produced on real landfills. The waste chemical composition and the availability of water in the solid waste appear to be the main parameters of these models. Results obtained when performing a sensitivity analysis over the biogas production model parameters under real conditions are shown. The importance of a proper characterizacion of the waste as well as the necessity of improving the understanding of the behaviour and development of the water on the unsaturated mass of waste are emphasized.

  6. Stillwater Wildlife Management Area : Suitability of geothermal waste water for use in waterfowl marsh maintenance

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report analyzes the suitability of geothermal waste waters for use in waterfowl management. An extensive review of available data on water quality of geothermal...

  7. Autotrophic nitrogen removal from low strength waste water at low temperature

    NARCIS (Netherlands)

    Hendrickx, T.L.G.; Wang, Y.; Kampman, C.; Zeeman, G.; Temmink, B.G.; Buisman, C.J.N.

    2012-01-01

    Direct anaerobic treatment of municipal waste waters allows for energy recovery in the form of biogas. A further decrease in the energy requirement for waste water treatment can be achieved by removing the ammonium in the anaerobic effluent with an autotrophic process, such as anammox. Until now,

  8. Studies on bacterial activities in aerobic and anaerobic waste water purification.

    Science.gov (United States)

    Adamse, A D; Deinema, M H; Zehnder, A J

    1984-01-01

    Some aspects of the bacteriology of aerobic and anaerobic waste water purification are discussed in view of current opinions and recent developments in the technology of waste water treatment. Various contributions of scientific workers attached to the Department of Microbiology of the Agricultural University, Wageningen, during the past 65 years are summarized. Besides, present investigations are described and research activities in future indicated.

  9. Selective Oxidation of Organic Compounds in Waste Water by ozone-based oxidation processes

    NARCIS (Netherlands)

    Boncz, M.A.

    2002-01-01

    For many different types of waste water, treatment systems have been implemented in the past decades. Waste water treatment is usually performed by biological processes, either aerobic or anaerobic, complemented with physical / chemical post treatment techniques. However, in so

  10. 42 CFR 71.45 - Food, potable water, and waste: U.S. seaports and airports.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Food, potable water, and waste: U.S. seaports and... Inspection § 71.45 Food, potable water, and waste: U.S. seaports and airports. (a) Every seaport and airport... Food and Drugs, Food and Drug Administration, in accordance with standards established in title...

  11. Autotrophic nitrogen removal from low strength waste water at low temperature

    NARCIS (Netherlands)

    Hendrickx, T.L.G.; Wang, Y.; Kampman, C.; Zeeman, G.; Temmink, B.G.; Buisman, C.J.N.

    2012-01-01

    Direct anaerobic treatment of municipal waste waters allows for energy recovery in the form of biogas. A further decrease in the energy requirement for waste water treatment can be achieved by removing the ammonium in the anaerobic effluent with an autotrophic process, such as anammox. Until now, an

  12. Life Cycle Assesment of Daugavgriva Waste Water Treatment Plant

    Science.gov (United States)

    Romagnoli, F.; Sampaio, F.; Blumberga, D.

    2009-01-01

    This paper presents the assessment of the environmental impacts caused by the treatment of Riga's waste water in the Daugavgriva plant with biogas energy cogeneration through the life cycle assessment (LCA). The LCA seems to be a good tool to assess and evaluate the most serious environmental impacts of a facility The results showed clearly that the impact category contributing the most to the total impact -eutrophicationcomes from the wastewater treatment stage. Climate change also seems to be a relevant impact coming from the wastewater treatment stage and the main contributor to the Climate change is N2O. The main environmental benefits, in terms of the percentages of the total impact, associated to the use of biogas instead of any other fossil fuel in the cogeneration plant are equal to: 3,11% for abiotic depletation, 1,48% for climate change, 0,51% for acidification and 0,12% for eutrophication.

  13. Alkaline subcritical water gasification of dairy industry waste (Whey).

    Science.gov (United States)

    Muangrat, Rattana; Onwudili, Jude A; Williams, Paul T

    2011-05-01

    The near-critical water gasification of dairy industry waste in the form of Whey, a product composed of mixtures of carbohydrates (mainly lactose) and amino acids such as glycine and glutamic acid, has been studied. The gasification process involved partial oxidation with hydrogen peroxide in the presence of NaOH. The reactions were studied over the temperature range from 300°C to 390°C, corresponding pressures of 9.5-24.5 MPa and reaction times from 0 min to 120 min. Hydrogen production was affected by the presence of NaOH, the concentration of H(2)O(2), temperature, reaction time and feed concentration. Up to 40% of the theoretical hydrogen gas production was achieved at 390°C. Over 80% of the Whey nitrogen content was found as ammonia, mainly in the liquid effluent.

  14. Space Station Environmental Control and Life Support Systems: An Update on Waste Water Reclamation

    Science.gov (United States)

    Ferner, Kathleen M.

    1994-01-01

    Since the mid-1980's, work has been ongoing In the development of the various environmental control and life support systems (ECLSS) for the space station. Part of this effort has been focused on the development of a new subsystem to reclaim waste water that had not been previously required for shuttle missions. Because of the extended manned missions proposed, reclamation of waste water becomes imperative to avoid the weight penalties associated with resupplying a crew's entire water needs for consumption and daily hygiene. Hamilton Standard, under contract to Boeing Aerospace and Electronics, has been designing the water reclamation system for space station use. Since June of 1991, Hamilton Standard has developed a combined water processor capable of reclaiming potable quality water from waste hygiene water, used laundry water, processed urine, Shuttle fuel cell water, humidity condensate and other minor waste water sources. The system was assembled and then tested with over 27,700 pounds of 'real' waste water. During the 1700 hours of system operation required to process this waste water, potable quality water meeting NASA and Boeing specifications was produced. This paper gives a schematic overview of the system, describes the test conditions and test results and outlines the next steps for system development.

  15. Genetic risk assessment of acid waste water containing heavy metals.

    Science.gov (United States)

    Miadoková, E; Dúhová, V; Vlcková, V; Sládková, L; Sucha, V; Vlcek, D

    1999-10-01

    The mutagenic/cancerogenic potential of acid-mine water from the Slovak mining area Rudnany containing a high load of toxic metals was evaluated after its application to three model test organisms (bacteria Salmonella typhimurium, yeast Saccharomyces cerevisiae and plant Vicia sativa L.). The results obtained from the modified preincubation Ames assay proved that 1000-fold diluted waste water exhibited mutagenic effect in three (TA97, TA98, TA102) of four bacterial strains. In the test on yeast the toxicity and genotoxicity increased as a function of the concentration. At the highest concentration used (0.06%) the frequency of revertants increased 6 times and convertants increased 4.5 times above the control level. In the simultaneous phytotoxicity and clastogenicity assay, concentration dependent toxicity and statistically significant clastogenicity was proved. We can conclude that heavy metals might be responsible for the genotoxic/cancerogenic potential of the test water. However, we do not entirely exclude the possibility that its genotoxicity might be promoted by its high acidity.

  16. Degradation of drinking water sludge for long-term waste management

    OpenAIRE

    WATANABE, Yasutaka / KOMINE, Hideo / YASUHARA, Kazuya / MURAKAMI, Satoshi / TOYODA, Kazuhiro

    2008-01-01

    Drinking water sludge is industrial waste which is discharged during water purification, and it is presentlyanticipated to reuse drinking water sludge as geotechnical material. However, degradation has not been investigated. Tokeep strength, stability, and safety on long -term waste management, it is important to apply degradation characteristicsto designing and maintenance. As an aspect of degradation on drinking water sludge, variation of consolidationproperties induced interaction with wat...

  17. Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany.

    Science.gov (United States)

    Ahrens, Lutz; Felizeter, Sebastian; Sturm, Renate; Xie, Zhiyong; Ebinghaus, Ralf

    2009-09-01

    Polyfluorinated compounds (PFCs) were investigated in waste water treatment plant (WWTP) effluents and surface waters of the River Elbe from samples collected in 2007. Concentrations of various PFCs, including C(4)-C(8) perfluorinated sulfonates (PFSAs), C(6) and C(8) perfluorinated sulfinates, 6:2 fluorotelomer sulfonate, C(5)-C(13) perfluorinated carboxylic acids (PFCAs), C(4) and C(8) perfluoroalkyl sulfonamides and 6:2, 8:2 and 10:2 unsaturated fluorotelomercarboxylic acids were quantified. Sum PFC concentrations of the river water ranged from 7.6 to 26.4ngL(-1), whereas sum PFC concentrations of WWTP effluents were approximately 5-10 times higher (30.5-266.3ngL(-1)), indicating that WWTPs are potential sources of PFCs in the marine environment. PFC patterns of different WWTP effluents varied depending on the origin of the waste water, whereas the profile of PFC composition in the river water was relatively constant. In both kinds of water samples, perfluorooctanoic acid (PFOA) was the major PFC, whereas perfluorobutane sulfonate (PFBS) was the predominant PFSA.

  18. Remaking Waste as Water: The Governance of Recycled Effluent for Potable Water Supply

    Directory of Open Access Journals (Sweden)

    Katharine Meehan

    2013-02-01

    Full Text Available Water managers increasingly rely on the indirect potable reuse (IPR of recycled effluent to augment potable water supplies in rapidly growing cities. At the same time, the presence of waste – as abject material – clearly remains an object of concern in IPR projects, spawning debate and opposition among the public. In this article, we identify the key governance factors of IPR schemes to examine how waste disrupts and stabilises existing practices and ideologies of water resources management. Specifically, we analyse and compare four prominent IPR projects from the United States and Australia, and identify the techno-scientific, legal, and socio-economic components necessary for successful implementation of IPR projects. This analysis demonstrates that successful IPR projects are characterised by large-scale, centralised infrastructure, state and techno-scientific control, and a political economy of water marked by supply augmentation and unchecked expansion. We argue that – despite advanced treatment – recycled effluent is a parallax object: a material force that disrupts the power geometries embedded in municipal water management. Consequently, successful IPR schemes must stabilise a particular mode of water governance, one in which recycled effluent is highly regulated and heavily policed. We conclude with insights about the future role of public participation in IPR projects.

  19. QUALITY CHARACTERISTICS OF TECHNOLOGICAL WASTE WATER AFTER HYDRAULIC UNLOADING FISH AT PORTS

    Directory of Open Access Journals (Sweden)

    Dorota Janiszewska

    2015-07-01

    Full Text Available In this study characterization of sensory and physical-chemical properties of representative samples of technological waste water after hydraulic unloading fish from fishing vessels, including fishing boats equipped with RSW (Refrigerated Sea Water System or CSW (Chilling Sea Water System system was described. Sensory quality and analytical determinations in technological waste water samples was analyzed. They demonstrated that their sensory quality attributes and physical-chemical properties were different and depending on the destination of fish caught (consumption or industrial fishing, contact time-caught fish with seawater and water temperature (winter or summer season. Because technological waste water has a lot of substance content of protein, fat, nitrogen, phosphorus and chlorine compounds it is a threat to the natural environment. In connection with such a broad problem of utilization of technological waste water from fishing boats for Baltic fish is one of the most important issues to solve for fishermen and environmentalists.

  20. Water-related environmental control requirements at municipal solid waste-to-energy conversion facilities

    Energy Technology Data Exchange (ETDEWEB)

    Young, J C; Johnson, L D

    1980-09-01

    Water use and waste water production, water pollution control technology requirements, and water-related limitations to their design and commercialization are identified at municipal solid waste-to-energy conversion systems. In Part I, a summary of conclusions and recommendations provides concise statements of findings relative to water management and waste water treatment of each of four municipal solid waste-to-energy conversion categories investigated. These include: mass burning, with direct production of steam for use as a supplemental energy source; mechanical processing to produce a refuse-derived fuel (RDF) for co-firing in gas, coal or oil-fired power plants; pyrolysis for production of a burnable oil or gas; and biological conversion of organic wastes to methane. Part II contains a brief description of each waste-to-energy facility visited during the subject survey showing points of water use and wastewater production. One or more facilities of each type were selected for sampling of waste waters and follow-up tests to determine requirements for water-related environmental controls. A comprehensive summary of the results are presented. (MCW)

  1. Treatment of waste water from flue gas cleaning; Behandlung von Abwasser der Rauchgasreinigung

    Energy Technology Data Exchange (ETDEWEB)

    Ogiermann, Klaus; Meyerhoff, Thomas [Berkefeld - VWS Deutschland GmbH, Celle (Germany); Hagen, Klaus [Berkefeld - VWS Deutschland GmbH, Bayreuth (Germany); Basabe, Juan Luis [HPD Process Engineering S.A., Bilbao (Spain); Vendrup, Michael [Krueger A/S, Soeborg (Denmark)

    2012-11-01

    Strict limits must be adhered to for treating waste water incurred during flue gas desulphurisation (FGD). One and two-stage precipitation processes have proven themselves in FGD waste water treatment. Metals can be removed with the MetClean {sup registered} process. Another option is evaporation. Waste water ZLD systems (Zero Liquid Discharge) recover, via a falling film evaporator with subsequent crystallisation, more than 98 % of the water and produce, aside from the condensate, only solid material that can be disposed of in landfill. A further development, named ZLD CoLD trademark, significantly reduces the investment and operating costs of this solution. (orig.)

  2. Design and Testing of a Lyophilizer for Water Recovery from Solid Waste

    Science.gov (United States)

    Litwiller, Eric; Fisher, John; Flynn, Michael

    2005-01-01

    Mixed liquid/solid wastes, including feces, water processor effluents, and food waste, can be lyophilized (freeze-dried) to recover the water they contain and stabilize the solids remain. Previous research has demonstrated the potential benefits of using thermoelectric heat pumps to build a lyophilizer for processing waste in microgravity. These results were used to build a working prototype suitable for ground-based human testing. This paper describes the prototype design and presents the results of functional and performance tests. Equivalent system mass parameters are calculated, and practical issues such as sanitary waste handling in microgravity are addressed.

  3. Design and Testing of a Lyophilizer for Water Recovery from Solid Waste

    Science.gov (United States)

    Litwiller, Eric; Fisher, John; Flynn, Michael

    2005-01-01

    Mixed liquid/solid wastes, including feces, water processor effluents, and food waste, can be lyophilized (freeze-dried) to recover the water they contain and stabilize the solids remain. Previous research has demonstrated the potential benefits of using thermoelectric heat pumps to build a lyophilizer for processing waste in microgravity. These results were used to build a working prototype suitable for ground-based human testing. This paper describes the prototype design and presents the results of functional and performance tests. Equivalent system mass parameters are calculated, and practical issues such as sanitary waste handling in microgravity are addressed.

  4. Ozone pretreatment of process waste water generated in course of fluoroquinolone production.

    Science.gov (United States)

    Daoud, Fares; Pelzer, David; Zuehlke, Sebastian; Spiteller, Michael; Kayser, Oliver

    2017-10-01

    During production of active pharmaceutical ingredients, process waste water is generated at several stages of manufacturing. Whenever possible, the resulting waste water will be processed by conventional waste water treatment plants. Currently, incineration of the process waste water is the method to eliminate compounds with high biological activity. Thus, ozone treatment followed by biological waste water treatment was tested as an alternative method. Two prominent representatives of the large group of fluoroquinolone antibiotics (ciprofloxacin and moxifloxacin) were investigated, focussing on waste water of the bulk production. Elimination of the target compounds and generation of their main transformation products were determined by liquid chromatography - high resolution mass spectrometry (LC-HRMS). The obtained results demonstrated, that the concentration of moxifloxacin and its metabolites can be effectively reduced (>99.7%) prior entering the receiving water. On the contrary, the concentration of ciprofloxacin and its metabolites remained too high for safe discharge, necessitating application of prolonged ozonation for its further degradation. The required ozonation time can be estimated based on the determined kinetics. To assure a low biological activity the ecotoxicity of the ozonated waste water was investigated using three trophic levels. By means of multiple-stage mass spectrometry (MS(n)) experiments several new transformation products of the fluoroquinolones were identified. Thus, previously published proposed structures could be corrected or confirmed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Optimisation of water-cannon cleaning for deposit removal on water walls inside waste incinerators.

    Science.gov (United States)

    Graube, Franziska; Grahl, Sebastian; Rostkowski, Slawomir; Beckmann, Michael

    2016-02-01

    Deposits in municipal waste incinerators are very inhomogeneous in structure and constitution. They cause corrosion and reduce the efficiency, so they need to be removed frequently. Among other systems, operators use water cannons for the deposit removal. Two different removal mechanisms of water-cannon cleaning are suggested: A direct shattering of the deposit by the impact of the water jet, as well as the cracking caused by thermal stresses where droplets cool the deposits. As the contribution of each of the aforementioned mechanisms to the overall cleaning efficiency is unknown, we performed empirical investigations to determine the dominating effect. In a first experimental setup focusing on thermal stress, cold droplets were applied onto hot deposits taken from a waste incinerator. Results showed that the cleaning effect strongly depends on the deposit thickness and structure, so that the deposits could be categorised in three different groups. A second measurement campaign focused on the influence of deposit material, deposit temperature and water jet momentum. It could be shown that both deposit material and temperature have a significant effect on the cleaning efficiency, whereas an increase in water jet momentum only led to modest improvements. The combination of these two parameter studies implies that the influence of the thermal stress outweighs that of the momentum. This knowledge is applicable to the cleaning setup by increasing the temperature gradient. © The Author(s) 2015.

  6. Nutrient abatement potential and abatement costs of waste water treatment plants in the Baltic Sea region.

    Science.gov (United States)

    Hautakangas, Sami; Ollikainen, Markku; Aarnos, Kari; Rantanen, Pirjo

    2014-04-01

    We assess the physical potential to reduce nutrient loads from waste water treatment plants in the Baltic Sea region and determine the costs of abating nutrients based on the estimated potential. We take a sample of waste water treatment plants of different size classes and generalize its properties to the whole population of waste water treatment plants. Based on a detailed investment and operational cost data on actual plants, we develop the total and marginal abatement cost functions for both nutrients. To our knowledge, our study is the first of its kind; there is no other study on this issue which would take advantage of detailed data on waste water treatment plants at this extent. We demonstrate that the reduction potential of nutrients is huge in waste water treatment plants. Increasing the abatement in waste water treatment plants can result in 70 % of the Baltic Sea Action Plan nitrogen reduction target and 80 % of the Baltic Sea Action Plan phosphorus reduction target. Another good finding is that the costs of reducing both nutrients are much lower than previously thought. The large reduction of nitrogen would cost 670 million euros and of phosphorus 150 million euros. We show that especially for phosphorus the abatement costs in agriculture would be much higher than in waste water treatment plants.

  7. Using magnetically responsive tea waste to remove lead in waters under environmentally relevant conditions.

    Science.gov (United States)

    Yeo, Siang Yee; Choi, Siwon; Dien, Vivian; Sow-Peh, Yoke Keow; Qi, Genggeng; Hatton, T Alan; Doyle, Patrick S; Thio, Beng Joo Reginald

    2013-01-01

    We report the use of a simple yet highly effective magnetite-waste tea composite to remove lead(II) (Pb(2+)) ions from water. Magnetite-waste tea composites were dispersed in four different types of water-deionized (DI), artificial rainwater, artificial groundwater and artificial freshwater-that mimic actual environmental conditions. The water samples had varying initial concentrations (0.16-5.55 ppm) of Pb(2+) ions and were mixed with the magnetite-waste tea composite for at least 24 hours to allow adsorption of the Pb(2+) ions to reach equilibrium. The magnetite-waste tea composites were stable in all the water samples for at least 3 months and could be easily removed from the aqueous media via the use of permanent magnets. We detected no significant leaching of iron (Fe) ions into the water from the magnetite-waste tea composites. The percentage of Pb adsorbed onto the magnetite-waste tea composite ranged from ∼70% to 100%; the composites were as effective as activated carbon (AC) in removing the Pb(2+) ions from water, depending on the initial Pb concentration. Our prepared magnetite-waste tea composites show promise as a green, inexpensive and highly effective sorbent for removal of Pb in water under environmentally realistic conditions.

  8. Allelopathic effects of glucosinolate breakdown products in Hanza [Boscia senegalensis (Pers.) Lam.] processing waste water.

    Science.gov (United States)

    Rivera-Vega, Loren J; Krosse, Sebastian; de Graaf, Rob M; Garvi, Josef; Garvi-Bode, Renate D; van Dam, Nicole M

    2015-01-01

    Boscia senegalensis is a drought resistant shrub whose seeds are used in West Africa as food. However, the seeds, or hanza, taste bitter which can be cured by soaking them in water for 4-7 days. The waste water resulting from the processing takes up the bitter taste, which makes it unsuitable for consumption. When used for irrigation, allelopathic effects were observed. Glucosinolates and their breakdown products are the potential causes for both the bitter taste and the allelopathic effects. The objectives of this study are to identify and quantify the glucosinolates present in processed and unprocessed hanza as well as different organs of B. senegalensis, to analyze the chemical composition of the processing water, and to pinpoint the causal agent for the allelopathic properties of the waste water. Hanza (seeds without testa), leaves, branches, unripe, and ripe fruits were collected in three populations and subjected to glucosinolate analyses. Methylglucosinolates (MeGSL) were identified in all plant parts and populations, with the highest concentrations being found in the hanza. The levels of MeGSLs in the hanza reduced significantly during the soaking process. Waste water was collected for 6 days and contained large amounts of macro- and micronutrients, MeGSL as well as methylisothiocyanate (MeITC), resulting from the conversion of glucosinolates. Waste water from days 1-3 (High) and 4-6 (Low) was pooled and used to water seeds from 11 different crops to weeds. The High treatment significantly delayed or reduced germination of all the plant species tested. Using similar levels of MeITC as detected in the waste water, we found that germination of a subset of the plant species was inhibited equally to the waste water treatments. This confirmed that the levels of methylisiothiocyanate in the waste water were sufficient to cause the allelopathic effect. This leads to the possibility of using hanza waste water in weed control programs.

  9. Solid olive waste in environmental cleanup: oil recovery and carbon production for water purification.

    Science.gov (United States)

    El-Hamouz, Amer; Hilal, Hikmat S; Nassar, Nashaat; Mardawi, Zahi

    2007-07-01

    A potentially-economic three-fold strategy, to use solid olive wastes in water purification, is presented. Firstly, oil remaining in solid waste (higher than 5% of waste) was recovered by the Soxhlet extraction technique, which can be useful for the soap industry. Secondly, the remaining solid was processed to yield relatively high-surface area active carbon (AC). Thirdly, the resulting carbon was employed to reversibly adsorb chromate ions from water, aiming to establish a water purification process with reusable AC. The technique used here enabled oil recovery together with the production of a clean solid, suitable for making AC. This process also has the advantage of low production cost.

  10. Effects of treated waste water irrigation on some qualitative charcterstics of forage sorghum, corn and millet

    Directory of Open Access Journals (Sweden)

    alireza emami

    2009-06-01

    Full Text Available In order to study the effects of irrigation with different levels of urban treated waste water on feeding value of forage sorghum (Var. Speed feed and Sugar graze, maize (Var. SC 704 and millet (Var. Nutrifeed an experiment was conducted at Experimental Station No.1, Astan Qods Razavi Mashhad, and Animal Nutrition Laboratory, College of Agriculture, Ferdowsi University of Mashhad. Four varieties of forage plants with five levels of treated waste water: %0, %25, %50, %75 and %100 were compared in a split-plot experiment based on Randomized Complete Block Design with four replications per treatment. Feeding values of forage plants such as Crude Protein content (CP, Neutral Detergent Fiber content (NDF, in vitro Dry Matter Digestibility (DMD, Organic Matter Digestibility (OMD and D-Value were measured. Results showed that treated waste water irrigation had a significant effect on crude protein content. The highest crude protein content was shown at % 100 treated waste water ( %13.76 and the lowest was shown at % treated waste water (%9.54. There were no significant differences between %0 and %25, and also %75 and %100 treated waste water in terms of crude protein content, but there were significant differences between %50 and other treated waste water treatments (except 75% treatments. There were no significant difference between irrigation with different levels of treated waste water in terms of NDF, in vitro DMD, OMD, and D-Value. There were significant differences between forage plants in all studied characteristics, but there were no significant differences on interactions between forage plants and different levels of treated waste water treatments. Forage maize had the highest in vitro DMD at %75 treated waste water and forage sorghum (var. Speed feed had the lowest in vitro DMD at %0 treated waste water treatments with averages of %77.57 and %61.6, respectively. The results indicated that treated waste water increased the percentage of crude

  11. Technological processing waste water using the dressing the ejector system for pretreament

    Directory of Open Access Journals (Sweden)

    Božović Milan

    2017-01-01

    Full Text Available Slaughter industry produces large amounts of waste water, which endanger and degrade the natural recipients - recipients, given that the waste vode najčešće discharged without any form of treatment or purification. Wastewater slaughter industry carry faeces, straw, unprocessed animal feed, various stomach secretions, blood, fat, a variety of solid waste and other organic matter present. Many applied technical and technological solutions in order to prevent harming the recipients are not given adequate results from the ecological aspect. The reconstruction of a system for pre-treatment and slaughter waste water by applying technological solutions ejector - pump, not only have obtained good results required by the project, but also pointed to the possibility of their use in many types of agro-industrial waste water, especially with the growing number of small agro-industrial drive .

  12. Using Magnetically Responsive Tea Waste to Remove Lead in Waters under Environmentally Relevant Conditions

    KAUST Repository

    Yeo, Siang Yee

    2013-06-20

    We report the use of a simple yet highly effective magnetite-waste tea composite to remove lead(II) (Pb2+) ions from water. Magnetite-waste tea composites were dispersed in four different types of water–deionized (DI), artificial rainwater, artificial groundwater and artificial freshwater–that mimic actual environmental conditions. The water samples had varying initial concentrations (0.16–5.55 ppm) of Pb2+ ions and were mixed with the magnetite-waste tea composite for at least 24 hours to allow adsorption of the Pb2+ ions to reach equilibrium. The magnetite-waste tea composites were stable in all the water samples for at least 3 months and could be easily removed from the aqueous media via the use of permanent magnets. We detected no significant leaching of iron (Fe) ions into the water from the magnetite-waste tea composites. The percentage of Pb adsorbed onto the magnetite-waste tea composite ranged from ~70% to 100%; the composites were as effective as activated carbon (AC) in removing the Pb2+ ions from water, depending on the initial Pb concentration. Our prepared magnetite-waste tea composites show promise as a green, inexpensive and highly effective sorbent for removal of Pb in water under environmentally realistic conditions.

  13. Performance of photocatalyst based carbon nanodots from waste frying oil in water purification

    Energy Technology Data Exchange (ETDEWEB)

    Aji, Mahardika Prasetya, E-mail: mahardika190@gmail.com; Wiguna, Pradita Ajeng; Susanto,; Rosita, Nita; Suciningtyas, Siti Aisyah; Sulhadi [Department of Physics, Faculty of Mathematics and Natural Science Universitas Negeri Semarang, Jalan Raya Sekaran Gunungpati 50229 Indonesia (Indonesia)

    2016-04-19

    Carbon Nanodots (C-Dots) from waste frying oil could be used as a photocatalyst in water purification with solar light irradiation. Performance of C-Dots as a photocatalyst was tested in the process of water purification with a given synthetic sewage methylene blue. The tested was also conducted by comparing the performance C-Dots made from frying oil, waste fryng oil as a photocatalyst and solution of methylene blue without photocatalyst C-Dots. Performance of C-Dots from waste frying oil were estimated by the results of absorbance spectrum. The results of measurement absorbance spectrum from the process of water purification with photocatalyst C-Dots showed that the highest intensity at a wavelength 664 nm of methylene blue decreased. The test results showed that the performance of photocatalyst C-Dots from waste frying oil was better in water purification. This estimated that number of particles C-dots is more in waste frying oil because have experieced repeated the heating process so that the higher particles concentration make the photocatalyst process more effective. The observation of the performance C-Dots from waste frying oil as a photocatalyst in the water purification processes become important invention for solving the problems of waste and water purification.

  14. Discharge of water containing waste emanating from land to the marine environment: a water quality management perspective

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH

    2004-01-01

    Full Text Available The National Water Act, 1998 (Act 36 of 1998) mandates the Department of Water Affairs and Forestry to manage all water containing waste (wastewater), which emanates from land-based sources and which directly impact on the marine environment...

  15. Measurement of protein-like fluorescence in river and waste water using a handheld spectrophotometer.

    Science.gov (United States)

    Baker, Andy; Ward, David; Lieten, Shakti H; Periera, Ryan; Simpson, Ellie C; Slater, Malcolm

    2004-07-01

    Protein-like fluorescence intensity in rivers increases with increasing anthropogenic DOM inputs from sewerage and farm wastes. Here, a portable luminescence spectrophotometer was used to investigate if this technology could be used to provide both field scientists with a rapid pollution monitoring tool and process control engineers with a portable waste water monitoring device, through the measurement of river and waste water tryptophan-like fluorescence from a range of rivers in NE England and from effluents from within two waste water treatment plants. The portable spectrophotometer determined that waste waters and sewerage effluents had the highest tryptophan-like fluorescence intensity, urban streams had an intermediate tryptophan-like fluorescence intensity, and the upstream river samples of good water quality the lowest tryptophan-like fluorescence intensity. Replicate samples demonstrated that fluorescence intensity is reproducible to +/- 20% for low fluorescence, 'clean' river water samples and +/- 5% for urban water and waste waters. Correlations between fluorescence measured by the portable spectrophotometer with a conventional bench machine were 0.91; (Spearman's rho, n = 143), demonstrating that the portable spectrophotometer does correlate with tryptophan-like fluorescence intensity measured using the bench spectrophotometer.

  16. [Hygienic, chemical and ecotoxicological aspects of the disinfection of biologically treated waste water by ozone and UV light].

    Science.gov (United States)

    Iske, U; Nelle, T; Oberg, C; Rudolph, K U; Zander-Hauck, S

    1996-02-01

    Biologically treated waste water from two different municipal treatment plants with mainly domestic waste water on the one hand and industrial influenced waste water on the other hand was disinfected by UV-irradiation and ozonation. Hygienic, chemical and eco-toxic effects of the disinfection step were examined. It was found that by ozonation as well as by UV-irradiation the required guide and imperative values for fecal and total coliform bacteria were fulfilled. The UV-irradiation induces no changes concerning chemical waste water quality and toxic effects. In contrast to these results ozonation can lead to alterations in chemistry and toxicity depending on the waste water composition.

  17. Phyto-treatment of domestic waste water using artificial marshes

    Energy Technology Data Exchange (ETDEWEB)

    Vaca, Rodrigo; Sanchez, Fabian [Oleoducto de Crudos Pesados (OCP), Quito (Ecuador)

    2009-12-19

    The phyto-treatment of domestic waste water by the use of artificial marshes system consists in beds of treatment working in series, this beds are constituted basically by inverse filters of inert granular material where the nutrients are cached from the residual water. Most of the treatment is carried in roots steams and leaves of defined species of plants. The rest of the treatment is performed by anaerobic and aerobic bacteria that grow within the beds. In the proximities of the roots and the area near the bed surface, aerobic processes take place and in deepest zones, anaerobic processes take place. It is desirable that the aerobic process will be the predominant one, mainly to avoid bad odors; this is obtained with the correct selection of plants which must have dense and deep roots. The economic factor is also important for the selection of this type of treatment system, the cost of operation and maintenance is minimum compared with other type of systems. The operation cost is practically zero because it is not required provision of electrical energy for its operation; energy used is the solar energy through the photosynthesis process. The maintenance is reduced to pruning and cleaning that can be performed twice a year. The goals of this paper is to show our experiences during the construction, stabilization and operation of these systems installed in 13 OCP locations with different types of weather and explain the conclusions arrived after construction and operation; present this kind of systems as an alternative of economic wastewater treatment in terms of construction, operation and maintenance and as environment friendly treatment. (author)

  18. Characterisation, dissemination and persistence of gentamicin resistant Escherichia coli from a Danish university hospital to the waste water environment

    DEFF Research Database (Denmark)

    Jakobsen, Lotte; Sandvang, Dorthe; Hansen, Lars H

    2008-01-01

    in waste water from the residential area. PFGE profiling revealed no spread of specific patient isolates to the waste water. The aac(3)-II gene was detected both in patient and waste water isolates. Furthermore horizontal transfer of the aac(3)-II gene of patient origin to a recipient was shown in vitro......, indicating a potential spread of the gene from patient isolates to waste water isolates. Regardless of origin, most isolates exhibited multi-resistance and contained several virulence genes. In conclusion, our study showed a possible spread of aac(3)-II from the hospital to the waste water. Most of the GEN......The aim of the study was to investigate the potential spread of gentamicin resistant (GEN(R)) Escherichia coli isolates or GEN(R) determinants from a Danish university hospital to the waste water environment. Waste water samples were collected monthly from the outlets of the hospital bed wards...

  19. Effect of coagulants upon turbidity removal of waste water from the Chasnala coal mine

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, G.; Singh, P.K. [Bira Institute of Technology Sindri, Dhanbad (India)

    2009-07-01

    In this paper, attempt has been made to control the extremely high turbidity of mine waste water by using different coagulants and it is observed that ferrous sulphate is the most effective coagulant followed by alum, ferric sulphate and lime. Also combinations of coagulants are used for getting the optimal results. Further steps are also discussed to make this water portable and a scheme of low cost water supply system of mine waste water has been suggested under the Water Management Strategies. 15 refs., 4 figs., 1 tab.

  20. Recovery of Organic and Amino Acids from Sludge and Fish Waste in Sub Critical Water Conditions

    Directory of Open Access Journals (Sweden)

    Muhammad Faisal

    2011-12-01

    Full Text Available The possibility of organic and amino acid production from the treatment of sludge and fish waste using water at sub critical conditions was investigated. The results indicated that at sub-critical conditions, where the ion product of water went through a maximum, the formation of organic acids was favorable. The presence of oxidant favored formation of acetic and formic acid. Other organic acids of significant amount were propionic, succinic and lactic acids. Depending on the type of wastes, formation of other organic acids was also possible. Knowing the organic acids obtained by hydrolysis and oxidation in sub-critical water of various wastes are useful in designing of applicable waste treatment process, complete degradation of organic wastes into volatile carbon and water, and also on the viewpoint of resource recovery. The production of lactic acid was discussed as well. The results indicated that temperature of 573 K, with the absence of oxidant, yield of lactic acid from fish waste was higher than sewage sludge. The maximum yield of total amino acids (137 mg/g-dry fish from waste fish entrails was obtained at subcritical condition (T = 523 K, P = 4 MPa at reaction time of 60 min by using the batch reactor. The amino acids obtained in this study were mainly alanine and glycine. Keywords:  organic acids, amino acids, sub-critical water, hydrothermal, resources recovery

  1. A Good Solution for Household Based on Fast Waste Water Blockage Detection

    Directory of Open Access Journals (Sweden)

    Mohammad A. Omardin

    2010-01-01

    Full Text Available Problem statement: The waste pipes from the wash basin are always flow in with several waste form kitchen preparation. Due to time consideration the pipe may comes through blockage and need blockage maintenance. Approach: This study presented an invention for early warning blockage detection for a kitchen waste water drain pipe. The waste water pipe some be connected through vertical pipe runs which are usually embedded in the wall. The Fast Waste Water Blockage Detection (FWABET is to create early detection of a blocked waste water level at kitchen appliances means for quick action knowing fluid flow passing through detector and indicates sign and alarm. Results: User society and country will be benefited from FWABET such as restaurants, slaughters house, hotels, hospitals, building developers and plumbing contractors. It is the first invention in Malaysia and can be adapt as a part of building services requirements. Conclusion: It is concluded that by apply the FWABETs, it may reduce the costs and time of blockage waste water blockage drainage maintenance operations.

  2. The effect of Abattoir effluent waste water on soils of Gandu area of ...

    African Journals Online (AJOL)

    The effect of Abattoir effluent waste water on soils of Gandu area of Sokoto, Sokoto ... of abattoir wastewater on the microbiological and physicochemical properties of ... The physicochemical parameters examined were pH, electric conductivity, ...

  3. National Enforcement Initiative: Preventing Animal Waste from Contaminating Surface and Ground Water

    Science.gov (United States)

    This page describes EPA's goal in preventing animal waste from contaminating surface and ground Water. It is an EPA National Enforcement Initiative. Both enforcement cases, and a map of enforcement actions are provided.

  4. Estimation of packaged water consumption and associated plastic waste production from household budget surveys

    Science.gov (United States)

    Wardrop, Nicola A.; Dzodzomenyo, Mawuli; Aryeetey, Genevieve; Hill, Allan G.; Bain, Robert E. S.; Wright, Jim

    2017-08-01

    Packaged water consumption is growing in low- and middle-income countries, but the magnitude of this phenomenon and its environmental consequences remain unclear. This study aims to quantify both the volumes of packaged water consumed relative to household water requirements and associated plastic waste generated for three West African case study countries. Data from household expenditure surveys for Ghana, Nigeria and Liberia were used to estimate the volumes of packaged water consumed and thereby quantify plastic waste generated in households with and without solid waste disposal facilities. In Ghana, Nigeria and Liberia respectively, 11.3 (95% confidence interval: 10.3-12.4), 10.1 (7.5-12.5), and 0.38 (0.31-0.45) Ml day-1 of sachet water were consumed. This generated over 28 000 tonnes yr-1 of plastic waste, of which 20%, 63% and 57% was among households lacking formal waste disposal facilities in Ghana, Nigeria and Liberia respectively. Reported packaged water consumption provided sufficient water to meet daily household drinking-water requirements for 8.4%, less than 1% and 1.6% of households in Ghana, Nigeria and Liberia respectively. These findings quantify packaged water’s contribution to household water needs in our study countries, particularly Ghana, but indicate significant subsequent environmental repercussions.

  5. Utilization of red mud for the purification of waste waters from nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Luka, Mikelic; Visnja, Orescanin; Stipe, Lulic [Rudjer Boskovic Institute, Lab. for radioecology, Zagreb (Croatia)

    2006-07-01

    Sorption of the radionuclides and heavy metals from low level liquid radioactive waste on the coagulant produced from bauxite waste (red mud and waste base) was presented. Research was conducted on composite annual samples of waste water collected in the Waste Monitor Tank (W.M.T.) from Kro Nuclear Power Plant during each month. Activities of radionuclide in W.M.T. were measured before and after purification using high purity germanium detector. Also, elemental concentrations in W.M.T. before and after purification were measured by source excited energy dispersive X-ray fluorescence (E.D.X.R.F.). It has been showed that activated red mud is excellent purification agent for the removal of radionuclides present in low level liquid radioactive waste. Removal efficiency was 100% for the radionuclides {sup 58}Co and {sup 60}Co 100%, and over 60% for {sup 134}Cs and {sup 137}Cs. (authors)

  6. Phytoremediation of Polychlorobiphenyls PCBs in Landfill E-Waste Leachate with Water Hyacinth E.Crassipes

    OpenAIRE

    E.A Omondi; P.K Ndiba and P.G Njuru

    2015-01-01

    Abstract The presence of e-waste in a landfill can release persistent organic pollutants POPs including polychlorinated biphenyls PCBs into the environment. PCBs are a family of more than 200 chemical compounds congeners each of which consists of two benzene rings and one to ten chlorine atoms. This study investigated use of water hyacinth Eichhornia crassipes for phytoremediation of landfill leachate waste containing PCB. Landfill leachate was simulated in the laboratory by spiking water sam...

  7. STS-55 crewmembers repair waste water tank under OV-102's middeck subfloor

    Science.gov (United States)

    1993-01-01

    STS-55 Pilot Terence T. Henricks uses a spotlight and pen to point out a possible problem area on a waste water tank in the bilge area below Columbia's, Orbiter Vehicle (OV) 102's, middeck. Mission Specialist 1 (MS1) and Payload Commander (PLC) Jerry L. Ross records the activity with a video camcorder. The crewmembers are participating in an inflight maintenance (IFM) exercise to counter problems experienced with the waste water tank.

  8. STS-55 crewmembers repair waste water tank under OV-102's middeck subfloor

    Science.gov (United States)

    1993-01-01

    STS-55 Pilot Terence T. Henricks uses a spotlight and pen to point out a possible problem area on a waste water tank in the bilge area below Columbia's, Orbiter Vehicle (OV) 102's, middeck. Mission Specialist 1 (MS1) and Payload Commander (PLC) Jerry L. Ross records the activity with a video camcorder. The crewmembers are participating in an inflight maintenance (IFM) exercise to counter problems experienced with the waste water tank.

  9. Isolation and Screening of Water Microbes for Decolourisation of Textile Dye Waste

    OpenAIRE

    J. K. Singh,; Ranjan, R; Pranay P Pankaj

    2016-01-01

    Azo dyes are widely used in textile industry. Unused dyes, consisting mainly non biodegradable released along with waste water streams without any proper pre-treatment which cause nuisance for environment and accumulate in flora as well as fauna. These also exhibit allergic, carcinogenic and mutagenic properties for human beings. Isolation and screening of azo dye degrading bacteria are economic in biodegradation and detoxification. In the present study, 200 waste water samples were collected...

  10. Ground-water monitoring compliance plan for the Hanford Site Solid Waste Landfill

    Energy Technology Data Exchange (ETDEWEB)

    Fruland, R.M.

    1986-10-01

    Washington state regulations required that solid waste landfill facilities have ground-water monitoring programs in place by May 27, 1987. This document describes the well locations, installation, characterization studies and sampling and analysis plan to be followed in implementing the ground-water monitoring program at the Hanford Site Solid Waste Landfill (SWL). It is based on Washington Administrative Code WAC 173-304-490. 11 refs., 19 figs., 4 tabs.

  11. Conditions inside Water Pooled in a Failed Nuclear Waste Container and its Effect on Radionuclide Release

    Science.gov (United States)

    Hamdan, L. K.; Walton, J. C.; Woocay, A.

    2009-12-01

    Nuclear power use is expected to expand in the future, as part of the global clean energy initiative, to meet the world’s surging energy demand, and attenuate greenhouse gas emissions, which are mainly caused by fossil fuels. As a result, it is estimated that hundreds of thousands of metric tons of spent nuclear fuel (SNF) will accumulate. SNF disposal has major environmental (radiation exposure) and security (nuclear proliferation) concerns. Storage in unsaturated zone geological repositories is a reasonable solution for dealing with SNF. One of the key factors that determine the performance of the geological repository is the release of radionuclides from the engineered barrier system. Over time, the nuclear waste containers are expected to fail gradually due to general and localized corrosions and eventually infiltrating water will have access to the nuclear waste. Once radionuclides are released, they will be transported by water, and make their way to the accessible environment. Physical and chemical disturbances in the environment over the container will lead to different corrosion rates, causing different times and locations of penetration. One possible scenario for waste packages failure is the bathtub model, where penetrations occur on the top of the waste package and water pools inside it. In this paper the bathtub-type failed waste container is considered. We shed some light on chemical and physical processes that take place in the pooled water inside a partially failed waste container (bathtub category), and the effects of these processes on radionuclide release. Our study considers two possibilities: temperature stratification of the pooled water versus mixing process. Our calculations show that temperature stratification of the pooled water is expected when the waste package is half (or less) filled with water. On the other hand, when the waste package is fully filled (or above half) there will be mixing in the upper part of water. The effect of

  12. Water recovery and solid waste processing for aerospace and domestic applications. Volume 2: Appendices

    Science.gov (United States)

    Murray, R. W.

    1973-01-01

    Water and sewage treatment systems are presented with concentration on the filtration of water. Equipment is described for organic removal, solids removal, nutrient removal, inorganic removal, and disinfection of the water. Such things as aseline hardware, additional piping connections, waste disposal, and costs involved are also reported.

  13. WATER ACTIVITY DATA ASSESSMENT TO BE USED IN HANFORD WASTE SOLUBILITY CALCULATIONS

    Energy Technology Data Exchange (ETDEWEB)

    DISSELKAMP RS

    2011-01-06

    The purpose of this report is to present and assess water activity versus ionic strength for six solutes:sodium nitrate, sodium nitrite, sodium chloride, sodium carbonate, sodium sulfate, and potassium nitrate. Water activity is given versus molality (e.g., ionic strength) and temperature. Water activity is used to estimate Hanford crystal hydrate solubility present in the waste.

  14. A Novel Ion Exchange System to Purify Mixed ISS Waste Water Brines for Chemical Production and Enhanced Water Recovery

    Science.gov (United States)

    Lunn, Griffin; Spencer, LaShelle; Ruby, Anna-Maria; McCaskill, Andrew

    2014-01-01

    Current International Space Station water recovery regimes produce a sizable portion of waste water brine. This brine is highly toxic and water recovery is poor: a highly wasteful proposition. With new biological techniques that do not require waste water chemical pretreatment, the resulting brine would be chromium-free and nitrate rich which can allow possible fertilizer recovery for future plant systems. Using a system of ion exchange resins we can remove hardness, sulfate, phosphate and nitrate from these brines to leave only sodium and potassium chloride. At this point modern chlor-alkali cells can be utilized to produce a low salt stream as well as an acid and base stream. The first stream can be used to gain higher water recovery through recycle to the water separation stage while the last two streams can be used to regenerate the ion exchange beds used here, as well as other ion exchange beds in the ISS. Conveniently these waste products from ion exchange regeneration would be suitable as plant fertilizer. In this report we go over the performance of state of the art resins designed for high selectivity of target ions under brine conditions. Using ersatz ISS waste water we can evaluate the performance of specific resins and calculate mass balances to determine resin effectiveness and process viability. If this system is feasible then we will be one step closer to closed loop environmental control and life support systems (ECLSS) for current or future applications.

  15. Releases from the cooling water system in the Waste Tank Farm

    Energy Technology Data Exchange (ETDEWEB)

    Perkins, W.C.; Lux, C.R.

    1991-01-01

    On September 12, 1991, a cooling-water header broke in the H-Area Waste Tank farm, at the Savannah River Site, releasing contaminated water down a storm sewer that drains to the creek. A copy of the Occurrence Report is attached. As part of the follow-up on this incident, the NPSR Section was asked by Waste Management Technology to perform a probabilistic analysis of the following cases: (1) A large break in the header combined with a large break in a cooling coil inside a waste tank. (2) A large break in the header combined with a leak in a cooling coil inside a waste tank. (3) A large break in the header combined with a very small leak in a cooling coil inside a waste tank. This report documents the results of the analysis of these cases.

  16. Releases from the cooling water system in the Waste Tank Farm

    Energy Technology Data Exchange (ETDEWEB)

    Perkins, W.C.; Lux, C.R.

    1991-12-31

    On September 12, 1991, a cooling-water header broke in the H-Area Waste Tank farm, at the Savannah River Site, releasing contaminated water down a storm sewer that drains to the creek. A copy of the Occurrence Report is attached. As part of the follow-up on this incident, the NPSR Section was asked by Waste Management Technology to perform a probabilistic analysis of the following cases: (1) A large break in the header combined with a large break in a cooling coil inside a waste tank. (2) A large break in the header combined with a leak in a cooling coil inside a waste tank. (3) A large break in the header combined with a very small leak in a cooling coil inside a waste tank. This report documents the results of the analysis of these cases.

  17. Economies of density for on-site waste water treatment.

    Science.gov (United States)

    Eggimann, Sven; Truffer, Bernhard; Maurer, Max

    2016-09-15

    Decentralised wastewater treatment is increasingly gaining interest as a means of responding to sustainability challenges. Cost comparisons are a crucial element of any sustainability assessment. While the cost characteristics of centralised waste water management systems (WMS) have been studied extensively, the economics of decentralised WMS are less understood. A key motivation for studying the costs of decentralised WMS is to compare the cost of centralised and decentralised WMS in order to decide on cost-efficient sanitation solutions. This paper outlines a model designed to assess those costs which depend on the spatial density of decentralised wastewater treatment plants in a region. Density-related costs are mostly linked to operation and maintenance activities which depend on transportation, like sludge removal or the visits of professionals to the plants for control, servicing or repairs. We first specify a modelled cost-density relationship for a region in a geometric two-dimensional space by means of heuristic routing algorithms that consider time and load-capacity restrictions. The generic model is then applied to a Swiss case study for which we specify a broad range of modelling parameters. As a result, we identify a 'hockey-stick'-shaped cost curve that is characterised by strong cost reductions at high density values which level out at around 1 to 1.5 plants per km(2). Variations in the cost curves are mostly due to differences in management approaches (scheduled or unscheduled emptying). In addition to the well-known diseconomies of scale in the case of centralised sanitation, we find a similar generic cost behaviour for decentralised sanitation due to economies of density. Low densities in sparsely populated regions thus result in higher costs for both centralised and decentralised system. Policy implications are that efforts to introduce decentralised options in a region should consider the low-density/high-cost problem when comparing centralised

  18. HEAVY METAL ANALYSIS IN WASTE WATER SAMPLES FROM VALEA ŞESEI TAILING POND

    OpenAIRE

    I. L. MELENTI; Magyar, E.; T RUSU

    2011-01-01

    Heavy metal analysis in waste water samples from Valea Şesei tailing pond. The mining of ore deposits and the processing and smelting of copper at Roşia Poieni have resulted in an increase of the toxic elements concentration within all components of the environment in the area. Valea Şesei tailing pond is a waste deposit for the Roşia Poieni open-pit and is the biggest tailing pond in Romania. In October 2009, we determined 8 heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni and Zn) in 10 waste water ...

  19. Organic Tank Safety Project: development of a method to measure the equilibrium water content of Hanford organic tank wastes and demonstration of method on actual waste

    Energy Technology Data Exchange (ETDEWEB)

    Scheele, R.D.; Bredt, P.R.; Sell, R.L.

    1996-09-01

    Some of Hanford`s underground waste storage tanks contain Organic- bearing high level wastes that are high priority safety issues because of potentially hazardous chemical reactions of organics with inorganic oxidants in these wastes such as nitrates and nitrites. To ensure continued safe storage of these wastes, Westinghouse Hanford Company has placed affected tanks on the Organic Watch List and manages them under special rules. Because water content has been identified as the most efficient agent for preventing a propagating reaction and is an integral part of the criteria developed to ensure continued safe storage of Hanford`s organic-bearing radioactive tank wastes, as part of the Organic Tank Safety Program the Pacific Northwest National Laboratory developed and demonstrated a simple and easily implemented procedure to determine the equilibrium water content of these potentially reactive wastes exposed to the range of water vapor pressures that might be experienced during the wastes` future storage. This work focused on the equilibrium water content and did not investigate the various factors such as @ ventilation, tank surface area, and waste porosity that control the rate that the waste would come into equilibrium, with either the average Hanford water partial pressure 5.5 torr or other possible water partial pressures.

  20. Inorganic impurity removal from waste oil and wash-down water by Acinetobacter johnsonii.

    Science.gov (United States)

    Jiang, Yan; Qi, Hui; Zhang, Xianming; Chen, Guoxu

    2012-11-15

    The removal of the abundant inorganic impurities in waste oil has been one of the most significant issues in waste oil reclamation. Acinetobacter johnsonii isolated from waste oil in aerobic process was employed to remove the inorganic impurities in waste oil and wash-down water. The biological process was developed through the primary mechanism research on the impurity removal and the optimization of the various parameters, such as inoculum type, inoculum volume and disposal temperature and time. The results showed that waste oil and wash-down water were effectively cleansed under the optimized conditions, with inorganic impurity and turbidity below 0.5% and 100 NTU from the initial values of 2% and 300 NTU, respectively. Sulfide, the main hazardous matter during waste oil reclamation, was also reduced within 1mg/L. After the biotreatment, the oil-water interface was clear in favor of its separation to benefit the smooth reclamation of waste oil and wash-down water. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Direct oxidation of strong waste waters, simulating combined wastes in extended-mission space cabins

    Science.gov (United States)

    Ross, L. W.

    1973-01-01

    The applications of modern technology to the resolution of the problem of solid wastes in space cabin environments was studied with emphasis on the exploration of operating conditions that would permit lowering of process temperatures in wet oxidation of combined human wastes. It was found that the ultimate degree of degradation is not enhanced by use of a catalyst. However, the rate of oxidation is increased, and the temperature of oxidation is reduced to 400 F.

  2. Bisphenol A in Solid Waste Materials, Leachate Water, and Air Particles from Norwegian Waste-Handling Facilities: Presence and Partitioning Behavior.

    Science.gov (United States)

    Morin, Nicolas; Arp, Hans Peter H; Hale, Sarah E

    2015-07-07

    The plastic additive bisphenol A (BPA) is commonly found in landfill leachate at levels exceeding acute toxicity benchmarks. To gain insight into the mechanisms controlling BPA emissions from waste and waste-handling facilities, a comprehensive field and laboratory campaign was conducted to quantify BPA in solid waste materials (glass, combustibles, vehicle fluff, waste electric and electronic equipment (WEEE), plastics, fly ash, bottom ash, and digestate), leachate water, and atmospheric dust from Norwegian sorting, incineration, and landfill facilities. Solid waste concentrations varied from below 0.002 mg/kg (fly ash) to 188 ± 125 mg/kg (plastics). A novel passive sampling method was developed to, for the first time, establish a set of waste-water partition coefficients, KD,waste, for BPA, and to quantify differences between total and freely dissolved concentrations in waste-facility leachate. Log-normalized KD,waste (L/kg) values were similar for all solid waste materials (from 2.4 to 3.1), excluding glass and metals, indicating BPA is readily leachable. Leachate concentrations were similar for landfills and WEEE/vehicle sorting facilities (from 0.7 to 200 μg/L) and dominated by the freely dissolved fraction, not bound to (plastic) colloids (agreeing with measured KD,waste values). Dust concentrations ranged from 2.3 to 50.7 mg/kgdust. Incineration appears to be an effective way to reduce BPA concentrations in solid waste, dust, and leachate.

  3. Supercritical water oxidation: application to reduce industrial wastes. Oxidacion en agua supercritica (OASC): aplicacion a la eliminacion de residuos industriales

    Energy Technology Data Exchange (ETDEWEB)

    Cocero, M.J.; Gonzalez, R.; Fernandez-Polanco, F.

    1994-01-01

    The incineration of wastes presents many problems with environmental laws. A solution could be the Supercritic oxidation water. (SOW). This method is clean, without air pollution. The article analyzes process, depressurization, energetical approvement, and applications for wastes. (Author) 18 refs.

  4. Waste load equilibrium allocation: a soft path for coping with deteriorating water systems.

    Science.gov (United States)

    Yao, Liming; Xu, Jiuping; Zhang, Mengxiang; Lv, Chengwei; Li, Chaozhi

    2016-08-01

    Waste load allocation is always regarded as another efficient approach comparing with the technology-based approach to improve the water quality. This paper proposes a bi-level multi-objective optimization model for optimally allocating the waste load of a river basin incorporating some concerns (i) the allocation equity from the regional authority, (ii) maximal benefits from the subareas along the river, and (iii) the Stackelberg-Nash-Cournot equilibrium strategy between the upper and lower decision makers. Especially, a novel Gini coefficient for measuring the load allocation equity is defined by considering the economic level and waste water quantity. The applicability and effectiveness of the proposed model is demonstrated through a practical case based on the Tuojiang River, which is a typical basin with diversified industrial waste discharges in western China. Some operational suggestions are developed to assist the decision makers' cope with deteriorating water systems.

  5. Geochemistry of hydropressured brines in South Louisiana: potential for reaction with injected geopressured waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Hanor, J.S.; Bebout, D.G.; Bachman, A.L. (eds.)

    1981-01-01

    Hydropressured, saline-water sands are being considered as possible sites for the disposal of geopressured-geothermal waste waters in South Louisiana. Probable injection horizons would most likely contain native brines of 120 to 140 g/l TDS. These brines show wide ranges in concentration of dissolved Ca, Sr, Ba, Fe, SO/sub 4/, and HCO/sub 3/, even within a restricted range of salinities. The probability is high that mineral precipitation will occur if untreated geopressured wastes are mixed with these waters. Clay migration and additional plugging of the injection well is possible if the injected wastes are significantly less saline than the native fluids. Costs of site-specific geochemical evaluation and chemical pre-treatment are thus factors which must be considered in the economic evaluation of deep well disposal of geopressured wastes in South Louisiana.

  6. Effects of Weathering at Waste Rock Dump on Water Quality Inside the Mine Wastes; A Case Study in Korea

    Science.gov (United States)

    Yim, G.; Cheong, Y.; Park, H.; Ji, S.; Lee, H.

    2008-05-01

    This study was carried out to investigate the route of acid rock drainage production and some of the important factors at the abandoned Geo-pung copper mine in Okcheon, Korea. In this research area, planting and remediation have been carried out to prevent environmental pollution, but these effects turned out to be a failure and that acid rock drainage is observed around waste rock dump and planted vegetation is dying. Currently, the slope of mine waste rock dump in the study site is about 40°. It is composed of particles with a variety of shapes, with the surface exposure to atmosphere being transformed to oxide minerals due to weathering. Since groundwater level underneath the mine wastes is directly related to rainfall, a comparative evaluation of weather records and groundwater level data obtained using on-site measuring device (CTD diver) would allow estimation of locational media-specific pattern of rainfall effect in term of infiltration flux and time of threshold impact on groundwater. Sampling and analysis of there borehole water were conducted in July and September, 2007. It was found that all of the borehole water had highly variable levels of Fe (0.4-588 mg/l), Al (8.2-41.9 mg/l), Cu (6.0-32.2 mg/l), Zn (22.2-226.7 mg/l) and other elements. Also, in general, pH of the borehole waters decreased while electric conducivity measured. Such a high variance in the water quality among different borehole water suggests that geochemical environment inside the mine wastes is largely dependent on the local variation in rainfall infiltration of waste rock dump and underneath groundwater level. Vadose zone which has vertical variation of 2-4 m is directly impacted by amount of rainfall and maintains oxidizing condition due to diffusion of oxygen carred by rainfall. Therefore, sulfide minerals within in the zone continued to be oxidized, producing acid rock drainage. To prevent production of acid rock drainage of mine waste, it is necessary to control infiltration of

  7. Growth and metal bioconcentration by conspecific freshwater macroalgae cultured in industrial waste water

    Directory of Open Access Journals (Sweden)

    Michael B. Ellison

    2014-05-01

    Full Text Available The bioremediation of industrial waste water by macroalgae is a sustainable and renewable approach to the treatment of waste water produced by multiple industries. However, few studies have tested the bioremediation of complex multi-element waste streams from coal-fired power stations by live algae. This study compares the ability of three species of green freshwater macroalgae from the genus Oedogonium, isolated from different geographic regions, to grow in waste water for the bioremediation of metals. The experiments used Ash Dam water from Tarong power station in Queensland, which is contaminated by multiple metals (Al, Cd, Ni and Zn and metalloids (As and Se in excess of Australian water quality guidelines. All species had consistent growth rates in Ash Dam water, despite significant differences in their growth rates in “clean” water. A species isolated from the Ash Dam water itself was not better suited to the bioremediation of that waste water. While there were differences in the temporal pattern of the bioconcentration of metals by the three species, over the course of the experiment, all three species bioconcentrated the same elements preferentially and to a similar extent. All species bioconcentrated metals (Cu, Mn, Ni, Cd and Zn more rapidly than metalloids (As, Mo and Se. Therefore, bioremediation in situ will be most rapid and complete for metals. Overall, all three species of freshwater macroalgae had the ability to grow in waste water and bioconcentrate elements, with a consistent affinity for the key metals that are regulated by Australian and international water quality guidelines. Together, these characteristics make Oedogonium a clear target for scaled bioremediation programs across a range of geographic regions.

  8. Growth and metal bioconcentration by conspecific freshwater macroalgae cultured in industrial waste water.

    Science.gov (United States)

    Ellison, Michael B; de Nys, Rocky; Paul, Nicholas A; Roberts, David A

    2014-01-01

    The bioremediation of industrial waste water by macroalgae is a sustainable and renewable approach to the treatment of waste water produced by multiple industries. However, few studies have tested the bioremediation of complex multi-element waste streams from coal-fired power stations by live algae. This study compares the ability of three species of green freshwater macroalgae from the genus Oedogonium, isolated from different geographic regions, to grow in waste water for the bioremediation of metals. The experiments used Ash Dam water from Tarong power station in Queensland, which is contaminated by multiple metals (Al, Cd, Ni and Zn) and metalloids (As and Se) in excess of Australian water quality guidelines. All species had consistent growth rates in Ash Dam water, despite significant differences in their growth rates in "clean" water. A species isolated from the Ash Dam water itself was not better suited to the bioremediation of that waste water. While there were differences in the temporal pattern of the bioconcentration of metals by the three species, over the course of the experiment, all three species bioconcentrated the same elements preferentially and to a similar extent. All species bioconcentrated metals (Cu, Mn, Ni, Cd and Zn) more rapidly than metalloids (As, Mo and Se). Therefore, bioremediation in situ will be most rapid and complete for metals. Overall, all three species of freshwater macroalgae had the ability to grow in waste water and bioconcentrate elements, with a consistent affinity for the key metals that are regulated by Australian and international water quality guidelines. Together, these characteristics make Oedogonium a clear target for scaled bioremediation programs across a range of geographic regions.

  9. Anaerobic treatment as a core technology for energy, nutrients and water from source-separated domestic waste(water)

    NARCIS (Netherlands)

    Zeeman, G.; Kujawa, K.; Mes, de T.Z.D.; Graaff, de M.S.; Abu-Ghunmi, L.N.A.H.; Mels, A.R.; Meulman, B.; Temmink, B.G.; Buisman, C.J.N.; Lier, van J.B.; Lettinga, G.

    2008-01-01

    Based on results of pilot scale research with source-separated black water (BW) and grey water (GW), a new sanitation concept is proposed. BW and GW are both treated in a UASB (-septic tank) for recovery of CH4 gas. Kitchen waste is added to the anaerobic BW treatment for doubling the biogas product

  10. Use of radionuclides at small water purification plants and in industrial waste water treatment by radiation adsorption method

    Energy Technology Data Exchange (ETDEWEB)

    Brusentseva, S.A.; Egorov, G.F.; Shubin, V.N. [and others

    1993-12-31

    An irradiation technique for potable water treatment is described. Use of radionuclides as a source of radiation allows for the automation of the process. The treatment is considered to be effective in waste water treatment to remove phenols, pesticides, and other toxic compounds.

  11. New Method of Online Measurement of Oil and Suspended Material Concentration In Flowing Waste Water

    Science.gov (United States)

    Liao, Hongwei; Xu, Guobing; Xu, Xinqiang; Zhou, Fangde

    2007-06-01

    At present, the most of the measurements of oil and suspended material concentration in waste water measuring are not online surveys. A new method of online measurement of oil and suspended material concentration in flowing waste water is presented. The room experiments and field tests showed that it is suitable to waste water treatment on line. After sampling, It needed to measure immediately the concentration in first time. Then let sample to be in still in 10 - 20 seconds. After that the bulk concentration was measured in second time. Because of the suspended solids having heavy density, they would be dropped from waster water. During ultrasonic operation, emulsify the oil in waster water, the oil and suspended solid would be depart. After that the third time measurement was done. In thus way the concentrations of oil and suspended solids can be measured. At present there are two on-site equipments operating in the Changqing oilfield, and the results are pretty well.

  12. Perfluorooctane surfactants in waste waters, the major source of river pollution.

    Science.gov (United States)

    Becker, Anna Maria; Gerstmann, Silke; Frank, Hartmut

    2008-05-01

    Perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) are persistent and widely distributed in the environment. Recently, the discharge of municipal waste water has been shown to be an important route of such perfluoroalkyl surfactants into the aquatic environment. The aim of this study was to assess the mass flow of PFOA and PFOS from typical waste water treatment plants (WWTPs) into surface waters. Samples were collected at different stages of treatment of four WWTPs in Northern Bavaria, Germany, and from the rivers receiving the treated waste waters (WW). The outflow of PFOA from the WWTPs to the rivers was 20-fold higher than the inflow to the plants; about a tenth was removed with the sludge. For PFOS, the increase from inlet to outlet was about 3-fold; almost half of it was retained in the sludge. Both surfactants were released into river water from the WWTP of a medium-sized city with domestic, industrial and commercial waste waters; in domestic waste waters the surfactants were found at much lower levels.

  13. Feasibility Studies on Static Pile Co Composting of Organic Fraction of Municipal Solid Waste With Dairy Waste Water

    OpenAIRE

    Manjula Gopinathan; Meenambal Thirumurthy

    2012-01-01

    Milk processing consumes a large amount of water and generates 6–10 liters of effluent per liter of milk processed. An effluent volume is approximately four times the volume of processed milk. Since the pollutants generated by industry are great losses of production, improvements in production efficiency are recommended to reduce pollutant loads. In this research a series of experimental studies were conducted with regard to bioconversion of organic fraction of municipal solid waste along wit...

  14. RESOLUTION OF THE PROBLEM OF TREATMENT OF WASTE WATER GENERATED BY CAR WASHES AND TRANSPORT ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Gogina Elena Sergeevna

    2012-12-01

    big cities of Russia. At the same time, the quality of the waste water treated by local water treatment stations fails to meet the present-day standard requirements. Moreover, potable water shall not be used for the purpose of washing transport vehicles. Within the recent 10 years, MGSU has developed a number of research projects aimed at the resolution of this problem. The concept developed by the MGSU specialists is to attain the highest quality of treated waste water generated by car washes and transport enterprises using the most advanced technologies of water treatment rather than to design new water treatment plants. Various methods may be applied for this purpose: restructuring of water treatment facilities, advanced feed, updated regulations governing the operation of water treatment plants.

  15. Gravimetric water distribution assessment from geoelectrical methods (ERT and EMI) in municipal solid waste landfill.

    Science.gov (United States)

    Dumont, Gaël; Pilawski, Tamara; Dzaomuho-Lenieregue, Phidias; Hiligsmann, Serge; Delvigne, Frank; Thonart, Philippe; Robert, Tanguy; Nguyen, Frédéric; Hermans, Thomas

    2016-09-01

    The gravimetric water content of the waste material is a key parameter in waste biodegradation. Previous studies suggest a correlation between changes in water content and modification of electrical resistivity. This study, based on field work in Mont-Saint-Guibert landfill (Belgium), aimed, on one hand, at characterizing the relationship between gravimetric water content and electrical resistivity and on the other hand, at assessing geoelectrical methods as tools to characterize the gravimetric water distribution in a landfill. Using excavated waste samples obtained after drilling, we investigated the influences of the temperature, the liquid phase conductivity, the compaction and the water content on the electrical resistivity. Our results demonstrate that Archie's law and Campbell's law accurately describe these relationships in municipal solid waste (MSW). Next, we conducted a geophysical survey in situ using two techniques: borehole electromagnetics (EM) and electrical resistivity tomography (ERT). First, in order to validate the use of EM, EM values obtained in situ were compared to electrical resistivity of excavated waste samples from corresponding depths. The petrophysical laws were used to account for the change of environmental parameters (temperature and compaction). A rather good correlation was obtained between direct measurement on waste samples and borehole electromagnetic data. Second, ERT and EM were used to acquire a spatial distribution of the electrical resistivity. Then, using the petrophysical laws, this information was used to estimate the water content distribution. In summary, our results demonstrate that geoelectrical methods represent a pertinent approach to characterize spatial distribution of water content in municipal landfills when properly interpreted using ground truth data. These methods might therefore prove to be valuable tools in waste biodegradation optimization projects. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Measurement of water potential in low-level waste management. [Shallow Land Burial

    Energy Technology Data Exchange (ETDEWEB)

    Jones, T. L.; Gee, G. W.; Kirkham, R. R.; Gibson, D. D.

    1982-08-01

    The measurement of soil water is important to the shallow land burial of low-level waste. Soil water flow is the principle mechanism of radionuclide transport, allows the establishment of stabilizing vegetation and also governs the dissolution and release rates of the waste. This report focuses on the measurement of soil water potential and provides an evaluation of several field instruments that are available for use to monitor waste burial sites located in arid region soils. The theoretical concept of water potential is introduced and its relationship to water content and soil water flow is discussed. Next, four major areas of soils research are presented in terms of their dependence on the water potential concept. There are four basic types of sensors used to measure soil water potential. These are: (1) tensiometers; (2) soil psychrometers; (3) electrical resistance blocks; and (4) heat dissipation probes. Tensiometers are designed to measure the soil water potential directly by measuring the soil water pressure. Monitoring efforts at burial sites require measurements of soil water over long time periods. They also require measurements at key locations such as waste-soil interfaces and within any barrier system installed. Electrical resistance blocks are well suited for these types of measurements. The measurement of soil water potential can be a difficult task. There are several sensors commercially available; however, each has its own limitations. It is important to carefully select the appropriate sensor for the job. The accuracy, range, calibration, and stability of the sensor must be carefully considered. This study suggests that for waste management activities, the choice of sensor will be the tensiometer for precise soil characterization studies and the electrical resistance block for long term monitoring programs. (DMC)

  17. Contamination by perfluorinated compounds in water near waste recycling and disposal sites in Vietnam.

    Science.gov (United States)

    Kim, Joon-Woo; Tue, Nguyen Minh; Isobe, Tomohiko; Misaki, Kentaro; Takahashi, Shin; Viet, Pham Hung; Tanabe, Shinsuke

    2013-04-01

    There are very few reports on the contamination by perfluorinated chemicals (PFCs) in the environment of developing countries, especially regarding their emission from waste recycling and disposal sites. This is the first study on the occurrence of a wide range of PFCs (17 compounds) in ambient water in Vietnam, including samples collected from a municipal dumping site (MD), an e-waste recycling site (ER), a battery recycling site (BR) and a rural control site. The highest PFC concentration was found in a leachate sample from MD (360 ng/L). The PFC concentrations in ER and BR (mean, 57 and 16 ng/L, respectively) were also significantly higher than those detected in the rural control site (mean, 9.4 ng/L), suggesting that municipal solid waste and waste electrical and electronic equipment are potential contamination sources of PFCs in Vietnam. In general, the most abundant PFCs were perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluoroundecanoic acid (PFUDA; waste materials.

  18. Restoration of wadi aquifers by artificial recharge with treated waste water.

    Science.gov (United States)

    Missimer, Thomas M; Drewes, Jörg E; Amy, Gary; Maliva, Robert G; Keller, Stephanie

    2012-01-01

    Fresh water resources within the Kingdom of Saudi Arabia are a rare and precious commodity that must be managed within a context of integrated water management. Wadi aquifers contain a high percentage of the naturally occurring fresh groundwater in the Kingdom. This resource is currently overused and has become depleted or contaminated at many locations. One resource that could be used to restore or enhance the fresh water resources within wadi aquifers is treated municipal waste water (reclaimed water). Each year about 80 percent of the country's treated municipal waste water is discharged to waste without any beneficial use. These discharges not only represent a lost water resource, but also create a number of adverse environmental impacts, such as damage to sensitive nearshore marine environments and creation of high-salinity interior surface water areas. An investigation of the hydrogeology of wadi aquifers in Saudi Arabia revealed that these aquifers can be used to develop aquifer recharge and recovery (ARR) systems that will be able to treat the impaired-quality water, store it until needed, and allow recovery of the water for transmittal to areas in demand. Full-engineered ARR systems can be designed at high capacities within wadi aquifer systems that can operate in concert with the natural role of wadis, while providing the required functions of additional treatment, storage and recovery of reclaimed water, while reducing the need to develop additional, energy-intensive desalination to meet new water supply demands.

  19. Lost water and nitrogen resources due to EU consumer food waste

    Science.gov (United States)

    Vanham, D.; Bouraoui, F.; Leip, A.; Grizzetti, B.; Bidoglio, G.

    2015-08-01

    The European Parliament recently called for urgent measures to halve food waste in the EU, where consumers are responsible for a major part of total waste along the food supply chain. Due to a lack of data on national food waste statistics, uncertainty in (consumer) waste quantities (and the resulting associated quantities of natural resources) is very high, but has never been previously assessed in studies for the EU. Here we quantify: (1) EU consumer food waste, and (2) associated natural resources required for its production, in term of water and nitrogen, as well as estimating the uncertainty of these values. Total EU consumer food waste averages 123 (min 55-max 190) kg/capita annually (kg/cap/yr), i.e. 16% (min 7-max 24%) of all food reaching consumers. Almost 80%, i.e. 97 (min 45-max 153) kg/cap/yr is avoidable food waste, which is edible food not consumed. We have calculated the water and nitrogen (N) resources associated with avoidable food waste. The associated blue water footprint (WF) (the consumption of surface and groundwater resources) averages 27 litre per capita per day (min 13-max 40 l/cap/d), which slightly exceeds the total blue consumptive EU municipal water use. The associated green WF (consumptive rainwater use) is 294 (min 127-max 449) l/cap/d, equivalent to the total green consumptive water use for crop production in Spain. The nitrogen (N) contained in avoidable food waste averages 0.68 (min 0.29-max 1.08) kg/cap/yr. The food production N footprint (any remaining N used in the food production process) averages 2.74 (min 1.02-max 4.65) kg/cap/yr, equivalent to the use of mineral fertiliser by the UK and Germany combined. Among all the food product groups wasted, meat accounts for the highest amounts of water and N resources, followed by wasted cereals. The results of this study provide essential insights and information on sustainable consumption and resource efficiency for both EU policies and EU consumers.

  20. Recovery of Caprolactam from Waste Water in Caprolactam Production Using Pulsed—sieve—plate Extraction column

    Institute of Scientific and Technical Information of China (English)

    LIUJiangqing; XIEFangyou; 等

    2002-01-01

    Recovery of caprolactam from waste water of caprolactam production factory was investigated using benzence as solvent in a small-scale pulsed-sieve-plate column.First,liquid-liquid equilibrium (LLE) deta were measured,including water-caprolactam-benzene system at low caprolactam concentrations,and waste water-benzene system.Then,the operating regions and mass transfer of the pulsed-sieve-plate column were measured.Finally,the overall apparent heights of a transfer unit based on continuous phase are correlated in terms of the column operation variables.

  1. The elimination of nitrogenized compounds from waste water; Eliminacion de los compuestos nitrogenados en aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Brugger, A. [Zullig AG, Barcelona (Spain)

    1995-12-31

    Nitrogenized compounds play a special role in water biology. Ammonium ions arc toxic for fish and nitrates are harmful for children and older people. A process for oxidizing ammonium ions by nitrification and then eliminating them through denitrification is presented for use in waste water treatment plants. These processes are automatically controlled by electrodes which measures the redox potential and thereby optimize the whole system. The results obtained by automating this process in the Leer waste water treatment plant (Germany) are presented. (Author) 6 refs.

  2. Sorption of toxic organic compounds on waste-water solids: Correlation with fundamental properties

    Energy Technology Data Exchange (ETDEWEB)

    Dobbs, R.A.; Wang, L.; Govind, R.

    1989-01-01

    Sorption of toxic organic compounds on primary, mixed-liquor, and digested solids from municipal waste-water treatment plants was correlated with octanol/water partition coefficients and with modified Randic indexes. The correlations developed are useful for assessing the role of sorption in the treatment of toxic or hazardous compounds in conventional biological waste-water treatment plants. Correlations developed provide a basis for predicting the concentration of toxic compounds associated with waste-water solids at a given equilibrium concentration in the aqueous phase. Organics in sludge can impact anaerobic digestion, land spreading, incineration and ocean dumping of sludges. Estimates of the concentration of toxics in sludge allows assessment of the impact of toxics on sludge-disposal options.

  3. An Insight into the Selection of Nano Particle for Removing Contaminants in Waste Water

    Directory of Open Access Journals (Sweden)

    Pandipriya J

    2014-04-01

    Full Text Available Waste water treatment is a major challenge in automobile industries and manufacturing sectors. In past few decades, research in waste water treatment has gained significant importance. Feasibility of nanoparticles for removing impurities is explored. However the major challenge lies in the synthesis of these nanoparticles. But with the advancements in nanotechnology, non-hazardous nanoparticles of size less than 10nm can be synthesized and morphological characteristics can also be successfully studied. Owing to their extremely smaller size, good absorption characteristics, better chemical reactivity, large surface to volume ratio, nanoparticles are highly suitable for removing metal/non-metal, organic/inorganic contaminants from water. This paper provides an extensive literature survey on the suitability of various nanoparticles for waste water treatment

  4. Comparative Studies on Growth and Remediation of Waste Water by Two Cyanobacterial Biofertilizers

    Directory of Open Access Journals (Sweden)

    Vijaya Tartte

    2010-09-01

    Full Text Available Nitrogen fixing cyanobacteria are ecologically significant inputs in improving the plant productivity in tropical countries like India. Large scale cultivation of these organisms using inorganic media is relatively expensive. In the present study utilization of kitchen waste water emerged from a pilgrim centre as a source of nutrients and its remediation was compared using two blue green algal cultures viz. Anabeana variabilis and Nostoc muscorum. A complete randomized design was created for the experiment that was performed on BG-11, 100% and 75% KW (Kitchen Water media. The physicochemical properties of waste water were analyzed before and after cultivation. It was found that the N. muscorum was more effective in removal of phosphorous and nitrogen contaminants from waste water to meet the standards of safe discharge besides producing more biomass compared to A. variabilis.

  5. Liquid Nitrogen and Water Jet Milling of Energetic Material Production Wastes

    Science.gov (United States)

    1996-05-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP017711 TITLE: Liquid Nitrogen and Water Jet Milling of Energetic...NITROGEN AND WATER JET MILLING OF ENERGETIC MATERIAL PRODUCTION WASTES Roger L. Schneider Rho Sigma Associates, Inc. Whitefish Bay, WI 53217-5968 USA 414

  6. Generation of Electricity from Abattoir Waste Water with the Aid of a ...

    African Journals Online (AJOL)

    Michael Horsfall

    organisms inherent in the waste water (Fan et al 2007;. Logan and Regan, 2006). ... Experimental set up for a dual chamber microbial fuel cell is as depicted in Fig. 1. ..... the examination of water and wastewater, 16th. Ed. APHA, Washington ...

  7. State waste discharge permit application for cooling water and condensate discharges

    Energy Technology Data Exchange (ETDEWEB)

    Haggard, R.D.

    1996-08-12

    The following presents the Categorical State Waste Discharge Permit (SWDP) Application for the Cooling Water and Condensate Discharges on the Hanford Site. This application is intended to cover existing cooling water and condensate discharges as well as similar future discharges meeting the criteria set forth in this document.

  8. Study of Material Used in Nanotechnology for the Recycling of Industrial Waste Water

    Science.gov (United States)

    Larbi, L.; Fertikh, N.; Toubal, A.

    The objective of our study is to recycle the industrial waste water of a industrial Complex after treatment by the bioprocess MBR (membrane bioreactor). In order to apply this bioprocess, the water quality in question was first of all studied. To characterize this industrial waste water, a series of physicochemical analysis was carried out according to standardized directives and methods. Following-up the water quality to meet the regulatory requirements with rejection of this industrial waste water, a study was done thanks to the permanently monitoring of the following relevant parameters(P): the flow, the potential of hydrogen (pH), the total suspended solids(TSS), the turbidity (Turb), the chemical oxygen demand (COD),the biochemical oxygen demand (BOD), the Kjeldahl total nitrogen (KTN) and ammonia (NH4+), the total phosphorus (Ptot), the fluorine (F), the oils (O), the fats (F) and the phenols (Ph). According to collected information, it was established the sampling rates to which the quality control was done, the selected analytical methods were validated by the control charts and the analysis test number was determined by the Cochran test. The results of the quality control show that some rejected water contents are not in the Algerian standards, but, in our case, the objective is the preoccupation for a standard setting of these industrial water parameters so as to recycle it. The process adopted by MBR for waste water treatment is being studied, first in the development of the experimental characterizing of the reactor and the selected membrane.

  9. Simulation of soluble waste transport and buildup in surface waters using tracers

    Science.gov (United States)

    Kilpatrick, F.A.

    1993-01-01

    Soluble tracers can be used to simulate the transport and dispersion of soluble wastes that might have been introduced or are planned for introduction into surface waters. Measured tracer-response curves produced from the injection of a known quantity of soluble tracer can be used in conjunction with the superposition principle to simulate potential waste buildup in streams, lakes, and estuaries. Such information is particularly valuable to environmental and water-resource planners in determining the effects of proposed waste discharges. The theory, techniques, analysis, and presentation of results of tracer-waste simulation tests in rivers, lakes, and estuaries are described. This manual builds on other manuals dealing with dye tracing by emphasizing the expanded use of data from time-of-travel studies.

  10. Fiberglass wastes/polyester resin composites: mechanical properties and water sorption

    Directory of Open Access Journals (Sweden)

    Edcleide M. Araújo

    2006-12-01

    Full Text Available The mechanical properties of polyester/fiberglass composites were studied. The aim of this work was to evaluate the possibility of reusing the wastes taken from spray-up processing of Paraíba state Industries as reinforcement in polyester matrix composites. Composites with 20, 30, 40, 50 and 60 wt. (% of recycled fiberglass were prepared by compression molding and compared with polyester/ virgin glass fiber composites. The mechanical properties and water sorption behavior were evaluated. The results showed that fiberglass wastes are promising to be reused in polyester resin composites. The impact strength was excellent. It can be concluded that the reusing of the fiberglass wastes is viable.

  11. Overview of the principal european and french regulations on air, water and solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Piro, M.

    1995-12-31

    This paper summarises French and European regulation on discharges into the environment (excluding radio-active emissions), whether solid, liquid or gaseous, that is to say, covering solid wastes, aqueous effluents and atmospheric emissions. The report includes commentaries allowing a better understanding of the legislation. Three fields are examined: the air, solid wastes and water. For each sector, we have listed the European directives and their application in French law. The chronological order facilitates consultation. (author).

  12. A novel recovery technology of trace precious metals from waste water by combining agglomeration and adsorption

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A novel and efficient technology for separating and recovering precious metals from waste water containing traces of Pd and Ag was studied by the combination of agglomeration and adsorption. The recovery process and the impacts of operating conditions such as pH value of waste water, adsorption time, additive quantity of the flocculant and adsorbent on the recovery efficiency were studied experimentally. The results show that Freundlich isothermal equation is suitable for describing the behavior of the recovery process, and the apparent first-order adsorption rate constant k at 25 ℃ is about 0.233 4 h-1 The optimum technology conditions during the recovery process are that pH value is 8-9; the volume ratio of flocculant to waste water is about 1 :(2 000-4 000); the mass ratio of adsorbent to waste water is 1 :(30-40); and processing time is 2-4 h. Finally, the field tests were done at the optimum technology conditions, which show that the total concentration of Pd and Ag in the waste water below 11 mg/L can be reduced to be less than 1 mg/L.

  13. Food consumption and waste and the embedded carbon, water and ecological footprints of households in China.

    Science.gov (United States)

    Song, Guobao; Li, Mingjing; Semakula, Henry Musoke; Zhang, Shushen

    2015-10-01

    Strategies for reducing food waste and developing sustainable diets require information about the impacts of consumption behavior and waste generation on climatic, water, and land resources. We quantified the carbon, water, and ecological footprints of 17,110 family members of Chinese households, covering 1935 types of foods, by combining survey data with available life-cycle assessment data sets. We also summarized the patterns of both food consumption and waste generation and analyzed the factors influencing the observed trends. The average person wasted (consumed) 16 (415) kg of food at home annually, equivalent to 40 (1080) kg CO2e, 18 (673) m(3), and 173 (4956) gm(2) for the carbon, water and ecological footprints, respectively. The generation of food waste was highly correlated with consumption for various food groups. For example, vegetables, rice, and wheat were consumed the most and accounted for the most waste. In addition to the three plant-derived food groups, pork and aquatic products also contributed greatly to embedded footprints. The data obtained in this study could be used for assessing national food security or the carrying capacity of resources. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Identification of Entamoeba moshkovskii in Treated Waste Water Used for Agriculture.

    Science.gov (United States)

    Fonseca, Jairo Andres; Heredia, Rubén Darío; Ortiz, Carolina; Mazo, Martín; Clavijo-Ramírez, Carlos Arturo; Lopez, Myriam Consuelo

    2016-03-01

    We conducted an observational study to determine the prevalence of Entamoeba spp., in samples collected in a waste water treatment plant that provides water for agricultural irrigation. Samples were collected weekly over a period of 10 weeks at representative contamination stages from within the treatment plant. Protozoan identification was performed via light microscopy and culture. PCR amplification of small subunit rRNA gene sequences of E. histolytica/dispar/moshkovskii was performed in culture positive samples. Light microscopy revealed the presence of Entamoeba spp., in 70% (14/20) of the raw waste water samples and in 80% (8/10) of the treated water samples. PCR amplification after culture at both 24 and 37°C revealed that 100% (29/29) of the raw waste water samples and 78.6% (11/14) of the treated waste water were positive for E. moshkovskii. We report the first isolation of E. moshkovskii in Colombia, confirmed by PCR. Recent reports of E. moshkovskii pathogenic potential suggest this finding could constitute a public health risk for people exposed to this water.

  15. Impact of Animal Waste Application on Runoff Water Quality in Field Experimental Plots

    Directory of Open Access Journals (Sweden)

    Paul B. Tchounwou

    2005-08-01

    Full Text Available Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium

  16. Consumptive water use associated with food waste: case study of fresh mango in Australia

    Science.gov (United States)

    Ridoutt, B. G.; Juliano, P.; Sanguansri, P.; Sellahewa, J.

    2009-07-01

    In many parts of the world, freshwater is already a scarce and overexploited natural resource, raising concerns about global food security and damage to freshwater ecosystems. This situation is expected to intensify with the FAO estimating that world food production must double by 2050. Food chains must therefore become much more efficient in terms of consumptive water use. For the small and geographically well-defined Australian mango industry, having an average annual production of 44 692 t of marketable fresh fruit, the average virtual water content (sum of green, blue and gray water) at orchard gate was 2298 l kg-1. However, due to wastage in the distribution and consumption stages of the product life cycle, the average virtual water content of one kg of Australian-grown fresh mango consumed by an Australian household was 5218 l. This latter figure compares to an Australian-equivalent water footprint of 217 l kg-1, which is the volume of direct water use by an Australian household having an equivalent potential to contribute to water scarcity. Nationally, distribution and consumption waste in the food chain of Australian-grown fresh mango to Australian households represented an annual waste of 26.7 Gl of green water and 16.6 Gl of blue water. These findings suggest that interventions to reduce food chain waste will likely have as great or even greater impact on freshwater resource availability as other water use efficiency measures in agriculture and food production.

  17. 生产废水余热回收技术应用探讨%Production Waste Water Waste Heat Recovery Technology Application

    Institute of Scientific and Technical Information of China (English)

    曲学明

    2014-01-01

    生产废水余热回收利用节能降耗,减排增效,投资回收期短,经济和社会效益显著。%production waste water waste heat recycling, energy saving and consumption reducing emissions reduction efficiency, short payback period of investment, economic and social benefit is remarkable.

  18. Anaerobic depuration of waste waters; Depuracion anaerobia de aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Mejias Sanchez, G.; Vazquez Berger, E.; Magana Pietra, A.H. [Facultad de Ingenieria, Universidad Autonoma de yucatan, Merida (Mexico)

    1996-08-01

    Trials were carried out at a 500 l semi-experimental plant using there reactor models-anaerobic filter, fixed film and UASB type-for the anaerobic treatment of waste from different sources. The results after 24 and 48 hours were compared. The greatest efficiency was obtained after 48 hours the aerobic filter reactor (66% displacement), followed by the fixed film reactor (50%) and the UASB model (41%). (Author) 16 refs.

  19. Potential for polyhydroxyalkanoate production on German or European municipal waste water treatment plants.

    Science.gov (United States)

    Pittmann, T; Steinmetz, H

    2016-08-01

    Biopolymers, which are made of renewable raw materials and/or biodegradable residual materials present a possible alternative to common plastic. A potential analysis, based on experimental results in laboratory scale and detailed data from German waste water treatment plants, showed that the theoretically possible production of biopolymers in Germany amounts to more than 20% of the 2015 worldwide biopolymer production. In addition a profound estimation regarding all European Union member states showed that theoretically about 115% of the actual worldwide biopolymer production could be produced on European waste water treatment plants. With an upgraded biopolymer production and a theoretically reachable biopolymer proportion of around 60% of the cell dry weight a total of 1,794,656tPHAa or approximately 236% of today's biopolymer production could be produced on waste water treatment plants in the European Union, using primary sludge as raw material only. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Improved waste water treatment by bio-synthesized Graphene Sand Composite.

    Science.gov (United States)

    Poornima Parvathi, V; Umadevi, M; Bhaviya Raj, R

    2015-10-01

    The photocatalytic and antibacterial properties of graphene biosynthesized from sugar and anchored on sand particles has been focused here. The morphology and composition of the synthesized Graphene Sand Composite (GSC) was investigated by means of X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDAX), Fourier Transform Infra-red Spectroscopy (FTIR) and UV-Visible spectroscopy. SEM images show wrinkly edges. This is characteristic of graphenic morphology. Three types of waste water samples namely, textile waste (TW), sugarcane industrial waste water (SW) and domestic waste water from a local purification center at Kodaikanal (KWW) were collected and treated. Adsorption experiments showed effective removal of impurities at 0.2 g of GSC. Photocatalytic activity was analyzed under visible and ultraviolet irradiation. The rate constant for TW increased to 0.0032/min for visible light irradiation from 0.0029/min under UV irradiation. SW showed similar improved activity with rate constant as 0.0023/min in visible irradiation compared to 0.0016/min under UV irradiation. For KWW enhanced activity was seen only in visible light irradiation with rate constant 0.0025/min. GSC showed an inhibition zone of 20 mm against the bacterium Escherichia coli. Results suggest development of economic and effective waste water management systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Energy from domestic wast water and kitchen wast with Eureka-HD, An Energy Balance

    NARCIS (Netherlands)

    Grond, Lukas

    2010-01-01

    Treatment of wastewater is commonly done centralized, bringing high costs for collecting a big flow of low concentrated wastewater. A mixed input of black water, grey water, rainwater and groundwater has a low concentration of contamination making recover

  2. Strains of toxic and harmful microalgae, from waste water, marine, brackish and fresh water.

    Science.gov (United States)

    Rodríguez-Palacio, M C; Crisóstomo-Vázquez, L; Alvarez-Hernández, S; Lozano-Ramírez, C

    2012-01-01

    Some microalgae are economically important in Mexico and the world because they can be potentially toxic. Algal explosive population growths are named harmful algal blooms and are frequently recorded in Mexico. The authors set up potentially toxic microalgae cultures from the Gulf of Mexico (Garrapatas tideland, Barberena river, Carpintero lagoon in Tamaulipas State; Chalchoapan and Catemaco lakes in Veracruz State), from the Mexican Pacific Ocean, Guerrero, Colima and Michoacán States, and from interior water bodies such as Vicente Aguirre dam, Chapultepec lake and several waste water treatment plants. This research is about the diversity and abundance of phytoplankton in relation a specific site because of harmful algal bloom events. Microalgae cultures are useful in order to solve taxonomic problems, to know life cycles, molecular studies, for the study of toxic species, and the isolation of useful metabolites. The cultures for this research are clonal, non-axenic, semi-continuous, 12:12 light/dark photoperiod, 20 ± 1 °C temperature and 90.5 µmol m(-2)s(-1) illumination. Four different culture media were used. This collection is open to the worldwide scientific community as a source of organisms in controlled conditions that can be used as a useful tool for microalgae research work.

  3. Degrading and Detoxifying Industrial Waste Water using Bioremediation Approach

    OpenAIRE

    Agrawal, P K; Sangeet Prabha; Shalu Mittal

    2014-01-01

    Bioremediation uses various microorganisms to detoxify or degrade various harmful substances in the nature, particularly soil and water. In the proposed work, five species of micro-organisms were used to analyse their impact on various physico-chemical parameters of water. In the first attempt the actual physico chemical parameters of the collected sample water were noted down (Fresh sample parameters). Then the sample water was treated with micro-organisms (one at a time). The growth of micr...

  4. Treatment of Zn-Containing Acidic Waste Water by Emulsion Liquid Membrane Process

    Institute of Scientific and Technical Information of China (English)

    王士柱; 何培炯; 郝东萍; 朱永贝睿

    2002-01-01

    Zn-containing waste water from a viscose staple fiber plant has been treated using the emulsion liquid membrane (ELM) process since 1995. The flow sheet and operating parameters of the ELM process are introduced. After adjusting the membrane composition, changing the emulsion phase ratio, and adding a scrubbing step, the ELM process operated normally without trouble for emulsion splitting and mass transport throughput. The splitter voltage was decreased to 3.55 kV. The zinc concentration of treated waste water was lowered to less than 10 mgL-1. More than 95% of the zinc was recovered and reused.

  5. The physico-chemical treatment of laundry waste water; Tratamiento fisicoquimica de aguas residuales de lavanderias

    Energy Technology Data Exchange (ETDEWEB)

    Susial, P.; Jato, I. G.; Larranaga, I.

    2006-07-01

    Waste water from the washing of clot her is treated with aluminium sulphate + acrylamide to achieve coagulation/flocculation. The analytical data obtained in a jar-test using the FTU as the control parameter demonstrate the efficacy of the process, as reductions in the FTU approaching 100% and elimination rates of 80% in detergents and 85% in the COD were achieved. These results show that coagulation and flocculation are sufficient to treat laundry waste water, even though it contains a high pollutant load, since both organic and inorganic pollutants can be significantly reduced by such operations. (Author) 17 refs.

  6. Water soluble decontamination coating for Defense Waste Processing Facility (DWPF) canisters

    Energy Technology Data Exchange (ETDEWEB)

    Selby, C.L.

    1986-12-17

    Water soluble sodium borate glass coating was successfully codeveloped by Clemson University (Dr. H.G. Lefort) and Du Pont as an alternative decontamination process to frit slurry blasting of Defense Waste Processing Facility (DWPF) canisters. Slurry blasting requires transport of abrasive slurries, might cause galling by entrapped frit particles, and could result in frit slurry freezeup in pumps and retention basins. Contamination can be removed from precoated canisters with a gentle hot water rinse. Glass waste spilled on a coated canister will spall off spontaneously during canister cooling. A glass coating appears to prevent transfer of contamination to the Canister Decontamination Cell (CDC) guides and cradle. 1 ref., 5 tabs.

  7. Ignition of the Soaring Droplet Sets of Waste-Derived Coal-Water Slurry With Petrochemicals

    Directory of Open Access Journals (Sweden)

    Valiullin Timur R.

    2016-01-01

    Full Text Available We have analyzed the ignition of droplet sets of waste-derived coal-water slurry with petrochemicals for the case of their soaring inside special combustion chamber. The fuel composition consists of filter cake of bituminous coal type G, waste turbine oil, water and plasticizer. Features of the ignition process were emphasized for groups of three soaring droplets in comparison with single droplet ignition. The ignition delay times were registered for particles that were deformed or segregated due to the interaction of initial fuel droplets with walls of the combustion chamber.

  8. Chromium removal from water by activated carbon developed from waste rubber tires.

    Science.gov (United States)

    Gupta, Vinod Kumar; Ali, Imran; Saleh, Tawfik A; Siddiqui, M N; Agarwal, Shilpi

    2013-03-01

    Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300-1000 cm(-1) prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.

  9. Water as a transport medium for waste out of towns

    DEFF Research Database (Denmark)

    Harremoës, P.

    1999-01-01

    The historical background for centralised water management in the cities of the developed world is outlined in order to give the rationale for the technical solutions we have inherited from the last century. The key element is maintaining the hygienic conditions in the cities. The success...... is illustrated by the absence of water-borne diseases in the modem developed city. A new paradigm is introduced based on added concern for the use of resources, pollution of the environment and the concern for the welfare of the coming generations. The water resource is not the unsustainable aspect of urban...... water use, because water is not lost, but polluted, which can be abated. Water can be re-routed and recycled. There are many attractive local solutions for better handling of urban water. (C) 1999 IAWQ Published by Elsevier Science Ltd.-All rights reserved....

  10. Removal of sulphates from waste waters by sulphate-reducing bacteria

    Directory of Open Access Journals (Sweden)

    Luptáková Alena

    2002-03-01

    Full Text Available are present in almost all types of water, usually as a simple anion SO42-. The sulphates together with hydrogencarbonates and chlorides are principal anions in natural waters. In typical underground and surface waters, the concentration of sulphates is in the range from ten to hundreds milligrams per litre.Nowadays, the importance of the control of sulphate concentration in waste waters increases. According to the Slovak legislation the limit concentration of sulphates in surface and drinking waters is 250 mg.l-1 . In rivers the contents of sulphates increases mainly by the discharge of waste waters, which are coming mainly from chemical, textile, metallurgical, pharmaceutical, paper and mining industry. The concentration of sulphates in these waters is in the order of grams per litre.Many technologies for the sulphates removal from waste waters exist, including biologico-chemical processes. The principle of one of these methods is the reduction of sulphates by sulphate-reducing bacteria to hydrogen-sulphide.The objective of this work was to study the effect of initial sulphates concentration on the activity of anaerobic sulphate reducers as well as the kinetics of the anaerobic sulphate reduction. The batch reactor was used at temperature of 30°C and pH 7,5. Lactate was used as the carbon source.

  11. Restoration of Wadi Aquifers by Artificial Recharge with Treated Waste Water

    KAUST Repository

    Missimer, Thomas M.

    2012-04-26

    Fresh water resources within the Kingdom of Saudi Arabia are a rare and precious commodity that must be managed within a context of integrated water management. Wadi aquifers contain a high percentage of the naturally occurring fresh groundwater in the Kingdom. This resource is currently overused and has become depleted or contaminated at many locations. One resource that could be used to restore or enhance the fresh water resources within wadi aquifers is treated municipal waste water (reclaimed water). Each year about 80 percent of the country\\'s treated municipal waste water is discharged to waste without any beneficial use. These discharges not only represent a lost water resource, but also create a number of adverse environmental impacts, such as damage to sensitive nearshore marine environments and creation of high-salinity interior surface water areas. An investigation of the hydrogeology of wadi aquifers in Saudi Arabia revealed that these aquifers can be used to develop aquifer recharge and recovery (ARR) systems that will be able to treat the impaired-quality water, store it until needed, and allow recovery of the water for transmittal to areas in demand. Full-engineered ARR systems can be designed at high capacities within wadi aquifer systems that can operate in concert with the natural role of wadis, while providing the required functions of additional treatment, storage and recovery of reclaimed water, while reducing the need to develop additional, energy-intensive desalination to meet new water supply demands. © 2012, The Author(s). Ground Water © 2012, National Ground Water Association.

  12. LCA of waste prevention activities: a case study for drinking water in Italy.

    Science.gov (United States)

    Nessi, Simone; Rigamonti, Lucia; Grosso, Mario

    2012-10-15

    The strategic relevance of waste prevention has considerably increased worldwide during recent years, such that the current European legislation requires the preparation of national waste prevention programmes in which reduction objectives and measures are identified. In such a context, it is possible to recognise how, in order to correctly evaluate the environmental consequences of a prevention activity, a life cycle perspective should be employed. This allows us to go beyond the simple reduction of the generated waste which, alone, does not automatically imply achieving better overall environmental performance, especially when this reduction is not pursued through the simple reduction of consumption. In this study, the energetic and environmental performance of two waste prevention activities considered particularly meaningful for the Italian context were evaluated using life cycle assessment (LCA) methodology. The two activities were the utilisation of public network water (two scenarios) and of refillable bottled water (two scenarios) for drinking purposes, instead of one-way bottled water (three scenarios). The energy demand and specific potential impacts of the four waste prevention scenarios and of the three baseline scenarios were compared with the aim of evaluating whether, and under what conditions, the analysed prevention activities are actually associated with overall energetic and environmental benefits. In typical conditions, the use of public network water directly from the tap results in the best scenario, while if water is withdrawn from public fountains, its further transportation by private car can involve significant impacts. The use of refillable PET bottled water seems the preferable scenario for packaged water consumption, if refillable bottles are transported to local distributors along the same (or a lower) distance as one-way bottles to retailers. The use of refillable glass bottled water is preferable to one-way bottled water only if a

  13. Impacts of waste from concentrated animal feeding operations on water quality

    Science.gov (United States)

    Burkholder, J.; Libra, B.; Weyer, P.; Heathcote, S.; Kolpin, D.; Thorne, P.S.; Wichman, M.

    2007-01-01

    Waste from agricultural livestock operations has been a long-standing concern with respect to contamination of water resources, particularly in terms of nutrient pollution. However, the recent growth of concentrated animal feeding operations (CAFOs) presents a greater risk to water quality because of both the increased volume of waste and to contaminants that may be present (e.g., antibiotics and other veterinary drugs) that may have both environmental and public health importance. Based on available data, generally accepted livestock waste management practices do not adequately or effectively protect water resources from contamination with excessive nutrients, microbial pathogens, and pharmaceuticals present in the waste. Impacts on surface water sources and wildlife have been documented in many agricultural areas in the United States. Potential impacts on human and environmental health from long-term inadvertent exposure to water contaminated with pharmaceuticals and other compounds are a growing public concern. This workgroup, which is part of the Conference on Environmental Health Impacts of Concentrated Animal Feeding Operations: Anticipating Hazards-Searching for Solutions, identified needs for rigorous ecosystem monitoring in the vicinity of CAFOs and for improved characterization of major toxicants affecting the environment and human health. Last, there is a need to promote and enforce best practices to minimize inputs of nutrients and toxicants from CAFOs into freshwater and marine ecosystems.

  14. STUDY ON APPLICATION OF AERATION BIOLOGICAL FLUID TANK TECHNOLGY IN NH4+—N WASTE WATER TREATMENT

    Institute of Scientific and Technical Information of China (English)

    CHENYi; LUJian-guo

    2003-01-01

    This paper introduces an application of "Aeration biological fluid tank"technology (ABFT) for the treatment of waste water containing NH4+-N and high concentrated chemicals.Highlights were focused on the effects of dissolved oxygen,pH,temperature and retention time on waste water bilogical treatment in order to find out a new approach in treatment of waste time on containing high concentrated NH4+-N.

  15. Supercritical Water Liquefaction of Coal and Waste Tires

    National Research Council Canada - National Science Library

    Prapan KUCHONTHARA; Yukihiko MATSUMURA

    2001-01-01

      Supercritical water liquefaction of scrap tire rubber and Ishikari coal, separately and in mixtures was investigated to study the possible synergetic effects of coliquefaction between the feedstocks...

  16. 7 CFR 1951.232 - Water and waste disposal systems which have become part of an urban area.

    Science.gov (United States)

    2010-01-01

    ... maintain the system under a lease-purchase arrangement which provides that: (1) The urban community will... part of an urban area. 1951.232 Section 1951.232 Agriculture Regulations of the Department of... Water and waste disposal systems which have become part of an urban area. A water and/or waste disposal...

  17. Water as a transport medium for waste out of towns

    DEFF Research Database (Denmark)

    Harremoës, P.

    1999-01-01

    is illustrated by the absence of water-borne diseases in the modem developed city. A new paradigm is introduced based on added concern for the use of resources, pollution of the environment and the concern for the welfare of the coming generations. The water resource is not the unsustainable aspect of urban...

  18. Measuring household consumption and waste in unmetered, intermittent piped water systems

    Science.gov (United States)

    Kumpel, Emily; Woelfle-Erskine, Cleo; Ray, Isha; Nelson, Kara L.

    2017-01-01

    Measurements of household water consumption are extremely difficult in intermittent water supply (IWS) regimes in low- and middle-income countries, where water is delivered for short durations, taps are shared, metering is limited, and household storage infrastructure varies widely. Nonetheless, consumption estimates are necessary for utilities to improve water delivery. We estimated household water use in Hubli-Dharwad, India, with a mixed-methods approach combining (limited) metered data, storage container inventories, and structured observations. We developed a typology of household water access according to infrastructure conditions based on the presence of an overhead storage tank and a shared tap. For households with overhead tanks, container measurements and metered data produced statistically similar consumption volumes; for households without overhead tanks, stored volumes underestimated consumption because of significant water use directly from the tap during delivery periods. Households that shared taps consumed much less water than those that did not. We used our water use calculations to estimate waste at the household level and in the distribution system. Very few households used 135 L/person/d, the Government of India design standard for urban systems. Most wasted little water even when unmetered, however, unaccounted-for water in the neighborhood distribution systems was around 50%. Thus, conservation efforts should target loss reduction in the network rather than at households.

  19. Trade study for water and waste management concepts. Task 7: Support special analysis. [cost analysis of life support systems for waste utilization during space missions

    Science.gov (United States)

    1975-01-01

    Cost analyses and tradeoff studies are given for waste management in the Space Station, Lunar Surface Bases, and interplanetary space missions. Crew drinking water requirements are discussed and various systems to recycle water are examined. The systems were evaluated for efficiency and weight savings. The systems considered effective for urine water recovery were vapor compression, flash evaporation, and air evaporation with electrolytic pretreatment. For wash water recovery, the system of multifiltration was selected. A wet oxidation system, which can process many kinds of wastes, is also considered.

  20. Recovery of metals from waste printed circuit boards by a mechanical method using a water medium.

    Science.gov (United States)

    Duan, Chenlong; Wen, Xuefeng; Shi, Changsheng; Zhao, Yuemin; Wen, Baofeng; He, Yaqun

    2009-07-15

    Research on the recycling of waste printed circuit boards (PCB) is at the forefront of environmental pollution prevention and resource recycling. To effectively crush waste PCB and to solve the problem of secondary pollution from fugitive odors and dust created during the crushing process, a wet impacting crusher was employed to achieve comminution liberation of the PCB in a water medium. The function of water in the crushing process was analyzed. When using slippery hammerheads, a rotation speed of 1470 rpm, a water flow of 6m(3)/h and a sieve plate aperture of 2.2mm, 95.87% of the crushed product was sized less than 1mm. 94.30% of the metal was in this grade of product. Using smashed material graded -1mm for further research, a Falcon concentrator was used to recover the metal from the waste PCB. Engineering considerations were the liberation degree, the distribution ratio of the metal and a way to simplify the technology. The separation mechanism for fine particles of different densities in a Falcon concentrator was analyzed in detail and the separation process in the segregation and separation zones was deduced. Also, the magnitude of centrifugal acceleration, the back flow water pressure and the feed slurry concentration, any of which might affect separation results, were studied. A recovery model was established using Design-Expert software. Separating waste PCB, crushed to -1mm, with the Falcon separator gave a concentrated product graded 92.36% metal with a recovery of 97.05%. To do this the reverse water pressure was 0.05 MPa, the speed transducer frequency was set at 30 Hz and the feed density was 20 g/l. A flow diagram illustrating the new technique of wet impact crushing followed by separation with a Falcon concentrator is provided. The technique will prevent environmental pollution from waste PCB and allow the effective recovery of resources. Water was used as the medium throughout the whole process.

  1. Process for purification of waste water produced by a Kraft process pulp and paper mill

    Science.gov (United States)

    Humphrey, M. F. (Inventor)

    1979-01-01

    The water from paper and pulp wastes obtained from a mill using the Kraft process is purified by precipitating lignins and lignin derivatives from the waste stream with quaternary ammonium compounds, removing other impurities by activated carbon produced from the cellulosic components of the water, and then separating the water from the precipitate and solids. The activated carbon also acts as an aid to the separation of the water and solids. If recovery of lignins is also desired, then the precipitate containing the lignins and quaternary ammonium compounds is dissolved in methanol. Upon acidification, the lignin is precipitated from the solution. The methanol and quaternary ammonium compound are recovered for reuse from the remainder.

  2. Water recycling from mixed chromic acid waste effluents by membrane technology

    NARCIS (Netherlands)

    Frenzel, I.; Stamatialis, D.F.; Wessling, M.

    2006-01-01

    Approaching zero discharge waste on site requires economical treatment technologies for the plating industry, recovering high quality rinse water for reuse. The combination of membranes and evaporation could be an efficient way to downsize the cost and the energy intensive evaporation equipment. In

  3. 40 CFR 403.19 - Provisions of specific applicability to the Owatonna Waste Water Treatment Facility.

    Science.gov (United States)

    2010-07-01

    ... FOR EXIST-ING AND NEW SOURCES OF POLLUTION § 403.19 Provisions of specific applicability to the... Industrial Users” includes the following Industrial Users in the City of Owatonna, Minnesota: Crown Cork and... Industrial User discharging to the Owatonna Waste Water Treatment Facility in Owatonna, Minnesota, when a...

  4. Study on shrimp waste water and vermicompost as a nutrient source for bell peppers

    Science.gov (United States)

    The aquaculture industry generates significant nutrient-rich wastewater that is released into streams and rivers causing environmental concern. The objective of this controlled environment study was to evaluate the effect of waste shrimp water (SW), vermicompost (VC), at rates of 10%, 20%, 40%, and ...

  5. Modelling and automation of the process of phosphate ion removal from waste waters

    Directory of Open Access Journals (Sweden)

    L. Lupa

    2008-03-01

    Full Text Available Phosphate removal from waste waters has become an environmental necessity, since these phosphates stimulate the growth of aquatic plants and planktons and contribute to the eutrophication process in general. The physicochemical methods of phosphate ion removal are the most effective and reliable. This paper presents studies on the process of phosphate ion removal from waste waters resulting from the fertiliser industry’s use of the method of co-precipitation with iron salts and with calcium hydroxide as the neutralizing agent. The optimal process conditions were established as those that allow achievement of a maximum degree of separation of the phosphate ions. The precipitate resulting from the co-precipitation process was analysed for chemical composition and establishment of thermal and structural stability, and the aim was also to establish in which form the phosphate ions in the formed precipitate can be found. Based on these considerations, the experimental data obtained in the process of phosphate ion removal from waste waters were analysed mathematically and the equations for the dependence of the degree of phosphate separation and residual concentration versus the main parameters of the process were formulated. In this paper an automated scheme for the phosphate ion removal from waste waters by co-precipitation is presented.

  6. Development of a vacuum crystallizer for the concentration of industrial waste water

    NARCIS (Netherlands)

    Roos, A.C.; Verschuur, R.-J.; Schreurs, B.; Scholz, R.; Jansens, P.J.

    2002-01-01

    Freeze concentration has proven to be a viable technology for the concentration of hazardous industrial waste waters before incineration. Owing to the relatively high investment cost of the technology, its applicability has been limited until now. This paper investigates the feasibility of a vacuum

  7. Effect of GarriI processing effluents [waste water] on the cyanide ...

    African Journals Online (AJOL)

    Effect of GarriI processing effluents [waste water] on the cyanide level of some root ... Journal Home · ABOUT · Advanced Search · Current Issue · Archives ... Root tubers are the important staple food crops in the tropics, Nigeria inclusive. ... Numerous studies have described environmental exposure of humans to cyanide in ...

  8. Removal of two antibacterial compounds triclocarban and triclosan in a waste water treatment plant

    Science.gov (United States)

    This study investigates the fate of Triclocarban (TCC) and Triclosan (TCS) in a waste water treatment plant (WWTP). Our goal was to identify the most effective removal step and to determine the amount on the solid phase versus degraded. Our influent contained higher TCS than TCC concentrations (8....

  9. Integrating Water, Waste, Energy, Transport and ICT Aspects into the Smart City Concept

    NARCIS (Netherlands)

    Strzelecka, Anna; Ulanicki, Bogumil; Koop, Stef; Koetsier, Laurence; Van Leeuwen, Kees; Elelman, Richard

    2017-01-01

    The paper presents the partial results of the EU BlueSCities project [1]. The project is developing the methodology for the integration of the water and waste sectors within the 'Smart Cities and Communities' concept to compliment other priority areas such as energy, transport and Information and

  10. Water recycling from mixed chromic acid waste effluents by membrane technology

    NARCIS (Netherlands)

    Frenzel, I.; Frenzel, I.; Stamatialis, Dimitrios; Wessling, Matthias

    2006-01-01

    Approaching zero discharge waste on site requires economical treatment technologies for the plating industry, recovering high quality rinse water for reuse. The combination of membranes and evaporation could be an efficient way to downsize the cost and the energy intensive evaporation equipment. In

  11. Development of a Vacuum Crystallizer for the Freeze Concentration of Industrial Waste Water

    NARCIS (Netherlands)

    Roos, A.C.; Verschuur, R.-J.; Schreurs, B.; Scholz, R.; Jansens, P.J.

    2003-01-01

    Freeze concentration has proven to be a viable technology for the concentration of hazardous industrial waste waters before incineration. Owing to the relatively high investment cost of the technology, its applicability has been limited until now. This paper investigates the feasibility of a vacuum

  12. Water-immiscible solvents for the biological treatment of waste gases

    NARCIS (Netherlands)

    Cesario, M.T.

    1997-01-01

    In conventional biological systems for the treatment of waste gases, contaminants are transferred directly to the aqueous phase and then converted by the micro-organisms. When poorly water-soluble pollutants are to be removed, biological degradation is often limited by the slow transport fr

  13. Water-immiscible solvents for the biological treatment of waste gases.

    NARCIS (Netherlands)

    Cesario, M.T.

    1997-01-01

    In conventional biological systems for the treatment of waste gases, contaminants are transferred directly to the aqueous phase and then converted by the micro-organisms. When poorly water-soluble pollutants are to be removed, biological degradation is often limited by the slow transport from the ga

  14. Trend of Mathematical Models in Microbial Fuel Cell for Environmental Energy Refinery from Waste/Water

    Science.gov (United States)

    Oh, Sung Taek

    A microbial fuel cell (MFC) is a device to use for bio electrochemical energy production. Electrophilic bacteria produce electrons in their metabolic pathway and the electrons can be extracted and concentrated on electrode by the electric potential difference (i.e. Galvanic cell). The bio-electrode may provide new opportunities for the renewable energy in waste water/swage treatment plants.

  15. Studying the processes of sulphates and chlorides extraction from water at low-waste water demineralization technology

    Directory of Open Access Journals (Sweden)

    Inna M. Тrus

    2014-12-01

    Full Text Available To solve the disposal problem of high-salinity liquid wastes resulting from the water demineralization, researched are the processes of chlorides’ and sulphates’ ion-exchange separation with further sulphates (in the form of calcium sulphate removal from the technological cycle. It is shown that the desulphatized water can be effectively desalinated by reverse osmosis filters, including low-pressure membranes Filmtec TW30-1812-50. The liquid waste obtained in form of concentrates, does contain chlorides, sodium ions and hardness ions. Established is that at these concentrates processing by lime and sodium carbonate or alkali and sodium carbonate they are softened with hardness decrease up to 0,25…0,95 mg-eq/dm3, which allows these solutions’ further electrolysis to obtain alkali and hydrochloric acid. Through direct electrolysis of concentrates, obtained by reverse osmosis water desalination at anionic membrane two-chamber electrolysers, we obtained a disinfectant solution containing chlorine oxigenates (active chlorine, hypochlorite, chlorite and sodium chlorate and duly effective in water sterilization. The resulting solution well keeps its properties and is promising for disinfection of natural and waste waters.

  16. Effective utilization of waste water through recycling, reuse, and remediation for sustainable agriculture.

    Science.gov (United States)

    Raman, Rajamani; Krishnamoorthy, Renga

    2014-01-01

    Water is vital for human, animal, and plant life. Water is one of the most essential inputs for the production of crops. Plants need it in enormous quantities continuously during their life. The role of water is felt everywhere; its scarcity causes droughts and famines, its excess causes floods and deluge. During the next two decades, water will increasingly be considered a critical resource for the future survival of the arid and semiarid countries. The requirement of water is increasing day by day due to intensive agriculture practices, urbanization, population growth, industrialization, domestic use, and other uses. On the other hand, the availability of water resources is declining and the existing water is not enough to meet the needs. To overcome this problem, one available solution is utilization of waste water by using recycling, reuse, and remediation process.

  17. Intended process water management concept for the mechanical biological treatment of municipal solid waste

    Institute of Scientific and Technical Information of China (English)

    D. Weichgrebe; S. Maerker; T. Boning; H. Stegemann

    2008-01-01

    Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment (MBT) makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT and also enhance resource recovery of the organic and inorganic fraction. The MBT plant at Gescher, Germany, is used as an example in order to determine the quantity and composition of process water and leachates from intensive and subsequent rotting, pressing water from anaerobic digestion and scrubber water from acid exhaust air treatment, and hence prepare an MBT water balance. The potential of, requirements for and limits to internal process water reuse as well as the possibilities of resource recovery from scrubber water are also examined. Finally, an assimilated process water management concept with the purpose of an extensive reduction of wastewater quantity and freshwater demand is presented.

  18. Taking the "waste" out of "wastewater" for human water security and ecosystem sustainability.

    Science.gov (United States)

    Grant, Stanley B; Saphores, Jean-Daniel; Feldman, David L; Hamilton, Andrew J; Fletcher, Tim D; Cook, Perran L M; Stewardson, Michael; Sanders, Brett F; Levin, Lisa A; Ambrose, Richard F; Deletic, Ana; Brown, Rebekah; Jiang, Sunny C; Rosso, Diego; Cooper, William J; Marusic, Ivan

    2012-08-10

    Humans create vast quantities of wastewater through inefficiencies and poor management of water systems. The wasting of water poses sustainability challenges, depletes energy reserves, and undermines human water security and ecosystem health. Here we review emerging approaches for reusing wastewater and minimizing its generation. These complementary options make the most of scarce freshwater resources, serve the varying water needs of both developed and developing countries, and confer a variety of environmental benefits. Their widespread adoption will require changing how freshwater is sourced, used, managed, and priced.

  19. The physicochemical characteristics and anaerobic degradability of desiccated coconut industry waste water.

    Science.gov (United States)

    Chanakya, H N; Khuntia, Himanshu Kumar; Mukherjee, Niranjan; Aniruddha, R; Mudakavi, J R; Thimmaraju, Preeti

    2015-12-01

    Desiccated coconut industries (DCI) create various intermediates from fresh coconut kernel for cosmetic, pharmaceutical and food industries. The mechanized and non-mechanized DCI process between 10,000 and 100,000 nuts/day to discharge 6-150 m(3) of malodorous waste water leading to a discharge of 264-6642 kg chemical oxygen demand (COD) daily. In these units, three main types of waste water streams are coconut kernel water, kernel wash water and virgin oil waste water. The effluent streams contain lipids (1-55 g/l), suspended solids (6-80 g/l) and volatile fatty acids (VFA) at concentrations that are inhibitory to anaerobic bacteria. Coconut water contributes to 20-50% of the total volume and 50-60% of the total organic loads and causes higher inhibition of anaerobic bacteria with an initial lag phase of 30 days. The lagooning method of treatment widely adopted failed to appreciably treat the waste water and often led to the accumulation of volatile fatty acids (propionic acid) along with long-chain unsaturated free fatty acids. Biogas generation during biological methane potential (BMP) assay required a 15-day adaptation time, and gas production occurred at low concentrations of coconut water while the other two streams did not appear to be inhibitory. The anaerobic bacteria can mineralize coconut lipids at concentrations of 175 mg/l; however; they are severely inhibited at a lipid level of ≥350 mg/g bacterial inoculum. The modified Gompertz model showed a good fit with the BMP data with a simple sigmoid pattern. However, it failed to fit experimental BMP data either possessing a longer lag phase and/or diauxic biogas production suggesting inhibition of anaerobic bacteria.

  20. WATER RESISTANCE OF WOOD - PLASTIC COMPOSITES MADE FROM WASTE MATERIALS RESULTED IN THE FURNITURE MANUFACTURING PROCESS

    OpenAIRE

    Camelia COŞEREANU; Dumitru LICA; Ioan CURTU; Mariana-Domnica STANCIU

    2014-01-01

    The purpose of this paper is to present innovative wood-plastic composites made from waste materials such as ABS (acrylonitrile butadiene styrene) and wood shavings resulted in the furniture manufacturing process. From previous investigations (with regard to physical integrity and compactness of the panels), only mixtures ranging from a ratio of 100% ABS: 0% shavings to 80% ABS: 20% shavings were selected for water resistance testing. Swelling in thickness and water absorption for...

  1. Dye Removal From Textile Waste Water Through The Adsorption By Pumice Used In Stone Washing

    Directory of Open Access Journals (Sweden)

    Körlü Aysegül Ekmekçi

    2015-09-01

    Full Text Available Because the waste production is inevitable in almost all industries, the elimination of these wastes is a requirement in terms of environmental regulations and welfare of all the creatures in the future. In this study, the use of the waste pumice stones of a denim washing mill is intended to eliminate the pollutant by a waste material and obtain economic benefits by converting it to the adsorbent. The pollutants in the effluents obtained from three different localisations of waste water treatment system of the same factory were removed through the adsorption. The experimental studies were carried out in three different steps; characterisation of adsorbent before and after adsorption; adsorption isotherm studies and biological oxygen demand (BOD, chemical oxygen demand (COD measurements. Characterisation studies showed that the waste pumice has almost the same structural properties with unused one except the existence of some organic residues coming from washing process. The results of adsorption studies conducted at the adsorbent concentrations changing from 5 to 35 g/l revealed that the decolourisation was initial dye-concentration dependent. According to the BOD and COD measurements, the supernatants obtained at the end of adsorption could be assumed as somewhat polluted and this result indicates that the organic impurities other than indigo were also removed through the adsorption.

  2. Discharge of water containing waste emanating from land to the ...

    African Journals Online (AJOL)

    driniev

    The DWAF as public trustee of the water resources in South. Africa must ... that freshwater (including groundwater), the coast and the sea are inseparably .... the international market where first world standards apply should not be ignored.

  3. Novel Electrochemical Process for Treatment of Perchlorate in Waste Water

    Science.gov (United States)

    2011-03-06

    technology combines ion exchange and electrochemistry to provide a selective and reversible method for removing target species from wastewater. In...nanotube nanocomposite for removing perchlorate from drinking water and wastewater. The ESIX technology combines ion exchange and electrochemistry to...potential for perchlorate occurrence in drinking water and food supplies is a human health concern because it can interfere with iodide uptake by the

  4. Synthesis of Cationic PEM Emulsion and Application in Waste Water Treatment

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-bin; LI Min; FANG Yi; SONG Hong; LUO Juan; XU Cheng-yin; WAN Chang-xiu

    2004-01-01

    Cationic polymer as a kind of flocculant is widely applied in purification treatment of waste water. Because it has positive charge group, it is able to connect strongly the suspended matters, short cellulose and other microparticles. The research on synthesis of cationic polymer and application in treatment of waste water is very universal abroad. But domestic research on those is not general. The technology of synthesis of PEM is simple, and the production cost is low. It is easy to apply in treatment of waste water.Synthesis of PEM Emulsion FlocculantSome distilled water, PVA(poly(vinyl alcohol)), EA(ethyl acrylate), and K2S2O8(potassium persulfate) were put into reaction vessel. Kept stirring up under nitrogen. When heated the solution to 40℃, dropped the water solution of MTA[(2-methacryloxylethyl)trimethyl ammonium].Maintained the temperature at 70℃, reacted about 7-8 hours. Then got the PEM emulsion. Changed the ratio of EA and MTA. Obtained a series of PEM emulsions.Stability and Convertibility of PEM EmulsionThe test results showed that when the EA/MTA was 85/15, the PEM emulsion was most stable.When the total monomer quantity was 35%, the convertibility of PEM emulsion was the highest,i.e.98.6%.The MTA Copolymerization Ratio and Morphology of PEM EmulsionWhen the monomers EA/MTA=85/15 and total monomer quantity was 35%, the MTA copolymerization ratio of PEM emulsion was 95.15%(the highest), and the PEM emulsion was some microspheres with 100-180nm of diameter.The Test Results of PEM Emulsion in Treatment of Waste Water The PEM emulsion flocculant was applied in treatment of waste water of paper mill, and measured the precipitation time(t) and transmittancy(T). The test results were showed in table 1. The optimum value of PEM which was able to make the waste water of paper mill into clear water was 0.008%.

  5. Anaerobic treatment as a core technology for energy, nutrients and water recovery from source-separated domestic waste(water).

    Science.gov (United States)

    Zeeman, Grietje; Kujawa, Katarzyna; de Mes, Titia; Hernandez, Lucia; de Graaff, Marthe; Abu-Ghunmi, Lina; Mels, Adriaan; Meulman, Brendo; Temmink, Hardy; Buisman, Cees; van Lier, Jules; Lettinga, Gatze

    2008-01-01

    Based on results of pilot scale research with source-separated black water (BW) and grey water (GW), a new sanitation concept is proposed. BW and GW are both treated in a UASB (-septic tank) for recovery of CH4 gas. Kitchen waste is added to the anaerobic BW treatment for doubling the biogas production. Post-treatment of the effluent is providing recovery of phosphorus and removal of remaining COD and nitrogen. The total energy saving of the new sanitation concept amounts to 200 MJ/year in comparison with conventional sanitation, moreover 0.14 kg P/p/year and 90 litres of potential reusable water are produced.

  6. Destruction of representative submarine food waste using supercritical water oxidation.

    Science.gov (United States)

    Chen, Shiying; Qu, Xuan; Zhang, Rong; Bi, Jicheng

    2015-03-01

    In this study, 13 types of organic materials were oxidized using H2O2 in a continuous flow reactor under the condition of supercritical water. The effect of the operational parameters on the conversion of total organic carbon (TOC) and total nitrogen (TN) was investigated, and the resulting quality of treated water was analyzed. It was found that these materials were easily oxidized with a TOC conversion achieving 99% at temperature of 460 °C and TN conversion reaching 94% at temperature of 500 °C. Rice decomposition was rapid, with TOC and TN decomposition rates of 99% obtained within residence of 100 s at temperature of 460 °C. At temperature of 460 °C, pressure of 24 MPa, residence time of 100 s, and excess oxygen of 100%, the quality of treated water attained levels commensurate with China's Standards for Drinking Water Quality. Reaction rate equation parameters were obtained by fitting the experimental data to the differential equation obtained using the Runge-Kutta algorithm. The decrease of the TOC in water samples exhibited reaction orders of 0.95 for the TOC concentration and 0.628 for the oxygen concentration. The activation energy was 83.018 kJ/mol.

  7. Degrading and Detoxifying Industrial Waste Water using Bioremediation Approach

    Directory of Open Access Journals (Sweden)

    P. K. Agrawal

    2014-06-01

    Full Text Available Bioremediation uses various microorganisms to detoxify or degrade various harmful substances in the nature, particularly soil and water. In the proposed work, five species of micro-organisms were used to analyse their impact on various physico-chemical parameters of water. In the first attempt the actual physico chemical parameters of the collected sample water were noted down (Fresh sample parameters. Then the sample water was treated with micro-organisms (one at a time. The growth of microbes was noted carefully over 96 hours after inoculation. The physico chemical parameters were recorded again and were compared with the fresh sample parameters. The results were analysed for any change and on this basis an impact factor was developed. The study reveals all the selected microbes have a great capacity of degrading and simplifying the complex molecules into simpler ones. Bioremediative treatment further enhances this capacity and therefore this approach can be utilized on large scale to minimize pollution of water bodies.

  8. Consumptive water use associated with food waste: case study of fresh mango in Australia

    Directory of Open Access Journals (Sweden)

    B. G. Ridoutt

    2009-07-01

    Full Text Available In many parts of the world, freshwater is already a scarce and overexploited natural resource, raising concerns about global food security and damage to freshwater ecosystems. This situation is expected to intensify with the FAO estimating that world food production must double by 2050. Food chains must therefore become much more efficient in terms of consumptive water use. For the small and geographically well-defined Australian mango industry, having an average annual production of 44 692 t of marketable fresh fruit, the average virtual water content (sum of green, blue and gray water at orchard gate was 2298 l kg−1. However, due to wastage in the distribution and consumption stages of the product life cycle, the average virtual water content of one kg of Australian-grown fresh mango consumed by an Australian household was 5218 l. This latter figure compares to an Australian-equivalent water footprint of 217 l kg−1, which is the volume of direct water use by an Australian household having an equivalent potential to contribute to water scarcity. Nationally, distribution and consumption waste in the food chain of Australian-grown fresh mango to Australian households represented an annual waste of 26.7 Gl of green water and 16.6 Gl of blue water. These findings suggest that interventions to reduce food chain waste will likely have as great or even greater impact on freshwater resource availability as other water use efficiency measures in agriculture and food production.

  9. Analysis of the Similarity and Difference of Treatment Technology between Radioactive Waste Water and Industrial Waste Water%浅析放射性废水与普通工业废水处理的异同

    Institute of Scientific and Technical Information of China (English)

    黄珏

    2015-01-01

    随着工业现代化的大力发展以及核能的利用,产生的普通工业废水与放射性废水越来越多。对废水处理方法的研究也逐步深入,发展形成了众多处理方法。本文阐述普通工业废水与放射性废水的特点、处理方法,并对两种废水的处理方法的异同点进行简要分析。%With the development of industrial and the use of nuclear energy, an increase number of industrial waste water and radioactive waste water are generated. The methods of treating waste water are gradually researched in-depth, which develop many processing methods. The characteristic and treatment methods of industrial waste water and radioactive waste water are described. The similarity and difference treatment technology of industrial waste water and radioactive waste water are briefly discussed.

  10. Production of Methane and Water from Crew Plastic Waste

    Science.gov (United States)

    Captain, Janine; Santiago, Eddie; Parrish, Clyde; Strayer, Richard F.; Garland, Jay L.

    2008-01-01

    Recycling is a technology that will be key to creating a self sustaining lunar outpost. The plastics used for food packaging provide a source of material that could be recycled to produce water and methane. The recycling of these plastics will require some additional resources that will affect the initial estimate of starting materials that will have to be transported from earth, mainly oxygen, energy and mass. These requirements will vary depending on the recycling conditions. The degredation products of these plastics will vary under different atmospheric conditions. An estimate of the the production rate of methane and water using typical ISRU processes along with the plastic recycling will be presented.

  11. An integrated approach to energy recovery from biomass and waste: Anaerobic digestion-gasification-water treatment.

    Science.gov (United States)

    Milani, M; Montorsi, L; Stefani, M

    2014-07-01

    The article investigates the performance of an integrated system for the energy recovery from biomass and waste based on anaerobic digestion, gasification and water treatment. In the proposed system, the organic fraction of waste of the digestible biomass is fed into an anaerobic digester, while a part of the combustible fraction of the municipal solid waste is gasified. Thus, the obtained biogas and syngas are used as a fuel for running a cogeneration system based on an internal combustion engine to produce electric and thermal power. The waste water produced by the integrated plant is recovered by means of both forward and inverse osmosis. The different processes, as well as the main components of the system, are modelled by means of a lumped and distributed parameter approach and the main outputs of the integrated plant such as the electric and thermal power and the amount of purified water are calculated. Finally, the implementation of the proposed system is evaluated for urban areas with a different number of inhabitants and the relating performance is estimated in terms of the main outputs of the system.

  12. Abatement of waste gases and water during the processes of semiconductor fabrication

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The purpose of this article is to examine the methodsand equipment for abating waste gases and water produced during themanufacture of semiconductor materials and devices. Threeseparating methods and equipment are presented in this article tocontrol three different groups of electronic wastes. The firstgroup includes arsine and phosphine emitted during the processes ofsemiconductor materials manufacture. The abatement procedure forthis group of pollutants consists of adding iodates, cupric andmanganese salts to a multiple shower tower (MST) structure. Thesecond group includes pollutants containing arsenic, phosphorus,HF, HCl, NO2, and SO3 emitted during the manufacture ofsemiconductor materials and devices. The abatement procedureinvolves mixing oxidants and bases in an oval column with aseparator in the middle. The third group consists of the ions ofAs, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in aflocculation-sedimentation compact device equipment. Test resultsshowed that all waste gases and water after the abatementprocedures presented in this article passed the discharge standardsset by the state Environmental Protection Administrationof china.

  13. Personal viewpoint: hemodialysis--water, power, and waste disposal: rethinking our environmental responsibilities.

    Science.gov (United States)

    Agar, John W M

    2012-01-01

    While medical health professionals are trained to detect, treat, and comfort, they are not trained to consider the environmental impact of the services they provide. Dialysis practitioners seem particularly careless in the use of natural resources—especially water and power—and seem broadly ignorant of the profound medical waste issues created by single use dialysis equipment. If the data we have collected is an indication, then extrapolation of this data to a dialysis population currently estimated at ~2 million patients worldwide, a “world dialysis service” would use ~156 billion liters of water and discard ~2/3 of that during reverse osmosis. This waste occurs, despite the discarded water being high-grade “gray water” of potable standard. The same world dialysis service would consume 1.62 billion kWh of power—mostly generated from coal and other environmentally damaging sources. Our world dialysis service, based on ~2 kg of waste from each dialysis treatment, would generate ~625,000 tonnes of plastic waste—waste that would be potentially reusable if simple sterilizing techniques were applied to it at the point of generation. Dialysis services must begin to explore eco-dialysis potentials. The continued plundering of resources without considering reuse or recycling, exploration of renewable energy options, or the reduction of the carbon footprint of the dialysis process . . . is unsustainable. Sustainable dialysis practices should be a global goal in the coming decade.

  14. Polyhydroxyalkanoate Production on Waste Water Treatment Plants: Process Scheme, Operating Conditions and Potential Analysis for German and European Municipal Waste Water Treatment Plants

    Directory of Open Access Journals (Sweden)

    Timo Pittmann

    2017-06-01

    Full Text Available This work describes the production of polyhydroxyalkanoates (PHA as a side stream process on a municipal waste water treatment plant (WWTP and a subsequent analysis of the production potential in Germany and the European Union (EU. Therefore, tests with different types of sludge from a WWTP were investigated regarding their volatile fatty acids (VFA production-potential. Afterwards, primary sludge was used as substrate to test a series of operating conditions (temperature, pH, retention time (RT and withdrawal (WD in order to find suitable settings for a high and stable VFA production. In a second step, various tests regarding a high PHA production and stable PHA composition to determine the influence of substrate concentration, temperature, pH and cycle time of an installed feast/famine-regime were conducted. Experiments with a semi-continuous reactor operation showed that a short RT of 4 days and a small WD of 25% at pH = 6 and around 30 °C is preferable for a high VFA production rate (PR of 1913 mgVFA/(L×d and a stable VFA composition. A high PHA production up to 28.4% of cell dry weight (CDW was reached at lower substrate concentration, 20 °C, neutral pH-value and a 24 h cycle time. A final step a potential analysis, based on the results and detailed data from German waste water treatment plants, showed that the theoretically possible production of biopolymers in Germany amounts to more than 19% of the 2016 worldwide biopolymer production. In addition, a profound estimation regarding the EU showed that in theory about 120% of the worldwide biopolymer production (in 2016 could be produced on European waste water treatment plants.

  15. Disposal of high-level nuclear waste above the water table in arid regions

    Energy Technology Data Exchange (ETDEWEB)

    Roseboom, E.H. Jr.

    1983-12-31

    Locating a repository in the unsaturated zone of arid regions eliminates or simplifies many of the technological problems involved in designing a repository for operation below the water table and predicting its performance. It also offers possible accessibility and ease of monitoring throughout the operational period and possible retrieval of waste long after. The risks inherent in such a repository appear to be no greater than in one located in the saturated zone; in fact, many aspects of such a repository`s performance will be much easier to predict and the uncertainties will be reduced correspondingly. A major new concern would be whether future climatic changes could produce significant consequences due to possible rise of the water table or increased flux of water through the repository. If spent fuel were used as a waste form, a second new concern would be the rates of escape of gaseous {sup 129}I and {sup 14}C to the atmosphere.

  16. Prototype implementation and experimental analysis of water heating using recovered waste heat of chimneys

    Directory of Open Access Journals (Sweden)

    Mahmoud Khaled

    2015-03-01

    Full Text Available This work discusses a waste heat recovery system (WHRS applied to chimneys for heating water in residential buildings. A prototype illustrating the suggested system is implemented and tested. Different waste heat scenarios by varying the quantity of burned firewood (heat input are experimented. The temperature at different parts of the WHRS and the gas flow rates of the exhaust pipes are measured. Measurements showed that the temperature of 95 L tank of water can be increased by 68 °C within one hour. Obtained results show that the convection and radiation exchanges at the bottom surface of the tank have a considerable impact on the total heat transfer rate of the water (as high as 70%.

  17. Water, vapour and heat transport in concrete cells for storing radioactive waste

    Science.gov (United States)

    Carme Chaparro, M.; W. Saaltink, Maarten

    2016-08-01

    Water is collected from a drain situated at the centre of a concrete cell that stores radioactive waste at 'El Cabril', which is the low and intermediate level radioactive waste disposal facility of Spain. This indicates flow of water within the cell. 2D numerical models have been made in order to reproduce and understand the processes that take place inside the cell. Temperature and relative humidity measured by sensors in the cells and thermo-hydraulic parameters from laboratory test have been used. Results show that this phenomenon is caused by capillary rise from the phreatic level, evaporation and condensation within the cell produced by temperature gradients caused by seasonal temperature fluctuations outside. At the centre of the cell, flow of gas and convection also play a role. Three remedial actions have been studied that may avoid the leakage of water from the drain.

  18. Ecological aspects of the biological phosphate removal from waste waters.

    NARCIS (Netherlands)

    Appeldoorn, K.J.

    1993-01-01

    Phosphate emission into surface waters can be reduced by treating sewage in wastewater treatment plants which are run alternately anaerobic and aerobic. Under these conditions, sludge in wastewater treatment plants becomes enriched with polyphosphate accumulating bacteria. Phosphate is released by t

  19. Nutrient storage rates in a national marsh receiving waste water

    Science.gov (United States)

    J.A. Nyman

    2000-01-01

    Artificial wetlands are commonly used to improve water quality in rivers and the coastal zone. In most wetlands associated with rivers, denitrification is probably the primary process that reduces nutrient loading. Where rivers meet oceans, however, significant amounts of nutrients might be permanently buried in wetlands because of global sea-level rise and regional...

  20. Coagulation-flocculation studies of waste-waters

    NARCIS (Netherlands)

    Leentvaar, J.

    1982-01-01

    Although coagulation-flocculation processes have been practiced world-wide for almost a century in water treatment, several problems both in the theoretical and in the applied field have not been resolved yet. Especially interpretation of practical results with respect to governing coagulationfloccu

  1. The challenges of water, waste and climate change in cities

    NARCIS (Netherlands)

    Koop, Steven H A; van Leeuwen, C. J.

    2017-01-01

    Cities play a prominent role in our economic development as more than 80 % of the gross world product (GWP) comes from cities. Only 600 urban areas with just 20 % of the world population generate 60 % of the GWP. Rapid urbanization, climate change, inadequate maintenance of water and wastewater

  2. Coastal circulation off Bombay in relation to waste water disposal

    Digital Repository Service at National Institute of Oceanography (India)

    Josanto, V.; Sarma, R.V.

    1976 to 78. The water movements were mainly tide-induced and elliptical in nature, with the major axis more or less parallel to the coast. The currents were mainly towards the northeast at a bearing of approximately at 30 degrees during flood...

  3. Sorption Capacity Measurement of Chlorella Vulgaris and Scenedesmus Acutus to Remove Chromium from Tannery Waste Water

    Science.gov (United States)

    Ardila, Liliana; Godoy, Rubén; Montenegro, Luis

    2017-08-01

    Tanning process is a polluting activity due to the release of toxic agents into the environment. One of the most important of those toxic chemicals is chromium. Different alternatives have been proposed for the removal of this metal from tanning waste water which include the optimization of the productive processes, physicochemical and biochemical waste water treatment. In this study, the biological adsorption process of trivalent chromium was carried out in synthetic water and tannery waste water through two types of native green microalgae, called Chlorella vulgaris and Scenedesmus acutus in Free State and immobilized in PVA state. This, considering that cellular wall of microalgae has functional groups like amines and carboxyl that might bind with trivalent chromium. Statistical significance of variables as pH temperature, chromium and algae concentrations was evaluated just like bio sorption capacity of different types of water and kind of bioadsorbent was calculated to determine if this process is a competitive solution comparing to other heavy metal removal processes.

  4. An attempt to perform water balance in a Brazilian municipal solid waste landfill.

    Science.gov (United States)

    São Mateus, Maria do Socorro Costa; Machado, Sandro Lemos; Barbosa, Maria Cláudia

    2012-03-01

    This paper presents an attempt to model the water balance in the metropolitan center landfill (MCL) in Salvador, Brazil. Aspects such as the municipal solid waste (MSW) initial water content, mass loss due to decomposition, MSW liquid expelling due to compression and those related to weather conditions, such as the amount of rainfall and evaporation are considered. Superficial flow and infiltration were modeled considering the waste and the hydraulic characteristics (permeability and soil-water retention curves) of the cover layer and simplified uni-dimensional empirical models. In order to validate the modeling procedure, data from one cell at the landfill were used. Monthly waste entry, volume of collected leachate and leachate level inside the cell were monitored. Water balance equations and the compressibility of the MSW were used to calculate the amount of leachate stored in the cell and the corresponding leachate level. Measured and calculated values of the leachate level inside the cell were similar and the model was able to capture the main trends of the water balance behavior during the cell operational period.

  5. Pyrolysis of low density polyethylene waste in subcritical water optimized by response surface methodology.

    Science.gov (United States)

    Wong, S L; Ngadi, N; Amin, N A S; Abdullah, T A T; Inuwa, I M

    2016-01-01

    Pyrolysis of low density polyethylene (LDPE) waste from local waste separation company in subcritical water was conducted to investigate the effect of reaction time, temperature, as well as the mass ratio of water to polymer on the liquid yield. The data obtained from the study were used to optimize the liquid yield using response surface methodology. The range of reaction temperature used was 162-338°C, while the reaction time ranged from 37 min to 143 min, and the ratio of water to polymer ranged from 1.9 to 7.1. It was found that pyrolysis of LDPE waste in subcritical water produced hydrogen, methane, carbon monoxide and carbon dioxide, while the liquid product contained alkanes and alkenes with 10-50 carbons atoms, as well as heptadecanone, dichloroacetic acid and heptadecyl ester. The optimized conditions were 152.3°C, reaction time of 1.2 min and ratio of water solution to polymer of 32.7, with the optimum liquid yield of 13.6 wt% and gases yield of 2.6 wt%.

  6. Survival of bacteria in nuclear waste buffer materials. The influence of nutrients, temperature and water activity

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, K.; Motamedi, M. [Goeteborg Univ. (Sweden). Dept. of General and Marine Microbiology; Karnland, O. [Clay Technology AB, Lund (Sweden)

    1995-12-01

    The concept of deep geological disposal of spent fuel is common to many national nuclear waste programs. Long-lived radioactive waste will be encapsulated in canisters made of corrosion resistant materials e.g. copper and buried several hundred meters below ground in a geological formation. Different types of compacted bentonite clay, or mixtures with sand, will be placed as a buffer around the waste canisters. A major concern for the performance of the canisters is that sulphate-reducing bacteria (SRB) may be present in the clay and induce corrosion by production of hydrogen sulphide. This report presents data on viable counts of SRB in the bedrock of Aespoe hard rock laboratory. A theoretical background on the concept water activity is given, together with basic information about SRB. Some results on microbial populations from a full scale buffer test in Canada is presented. These results suggested water activity to be a strong limiting factor for survival of bacteria in compacted bentonite. As a consequence, experiments were set up to investigate the effect from water activity on survival of SRB in bentonite. Here we show that survival of SRB in bentonite depends on the availability of water and that compacting a high quality bentonite to a density of 2.0 g/cm{sup 3}, corresponding to a water activity (a{sub w}) of 0.96, prevented SRB from surviving in the clay. 24 refs.

  7. Source tracking swine fecal waste in surface water proximal to swine concentrated animal feeding operations.

    Science.gov (United States)

    Heaney, Christopher D; Myers, Kevin; Wing, Steve; Hall, Devon; Baron, Dothula; Stewart, Jill R

    2015-04-01

    Swine farming has gone through many changes in the last few decades, resulting in operations with a high animal density known as confined animal feeding operations (CAFOs). These operations produce a large quantity of fecal waste whose environmental impacts are not well understood. The purpose of this study was to investigate microbial water quality in surface waters proximal to swine CAFOs including microbial source tracking of fecal microbes specific to swine. For one year, surface water samples at up- and downstream sites proximal to swine CAFO lagoon waste land application sites were tested for fecal indicator bacteria (fecal coliforms, Escherichia coli and Enterococcus) and candidate swine-specific microbial source-tracking (MST) markers (Bacteroidales Pig-1-Bac, Pig-2-Bac, and Pig-Bac-2, and methanogen P23-2). Testing of 187 samples showed high fecal indicator bacteria concentrations at both up- and downstream sites. Overall, 40%, 23%, and 61% of samples exceeded state and federal recreational water quality guidelines for fecal coliforms, E. coli, and Enterococcus, respectively. Pig-1-Bac and Pig-2-Bac showed the highest specificity to swine fecal wastes and were 2.47 (95% confidence interval [CI]=1.03, 5.94) and 2.30 times (95% CI=0.90, 5.88) as prevalent proximal down- than proximal upstream of swine CAFOs, respectively. Pig-1-Bac and Pig-2-Bac were also 2.87 (95% CI=1.21, 6.80) and 3.36 (95% CI=1.34, 8.41) times as prevalent when 48 hour antecedent rainfall was greater than versus less than the mean, respectively. Results suggest diffuse and overall poor sanitary quality of surface waters where swine CAFO density is high. Pig-1-Bac and Pig-2-Bac are useful for tracking off-site conveyance of swine fecal wastes into surface waters proximal to and downstream of swine CAFOs and during rain events. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Source tracking swine fecal waste in surface water proximal to swine concentrated animal feeding operations

    Science.gov (United States)

    Heaney, Christopher D.; Myers, Kevin; Wing, Steve; Hall, Devon; Baron, Dothula; Stewart, Jill R.

    2015-01-01

    Swine farming has gone through many changes in the last few decades, resulting in operations with a high animal density known as confined animal feeding operations (CAFOs). These operations produce a large quantity of fecal waste whose environmental impacts are not well understood. The purpose of this study was to investigate microbial water quality in surface waters proximal to swine CAFOs including microbial source tracking of fecal microbes specific to swine. For one year, surface water samples at up- and downstream sites proximal to swine CAFO lagoon waste land application sites were tested for fecal indicator bacteria (fecal coliforms, Escherichia coli and Enterococcus) and candidate swine-specific microbial source-tracking (MST) markers (Bacteroidales Pig-1-Bac, Pig-2-Bac, and Pig-Bac-2, and methanogen P23-2). Testing of 187 samples showed high fecal indicator bacteria concentrations at both up- and downstream sites. Overall, 40%, 23%, and 61% of samples exceeded state and federal recreational water quality guidelines for fecal coliforms, E. coli, and Enterococcus, respectively. Pig-1-Bac and Pig-2-Bac showed the highest specificity to swine fecal wastes and were 2.47 (95% confidence interval [CI] = 1.03, 5.94) and 2.30 times (95% CI = 0.90, 5.88) as prevalent proximal down- than proximal upstream of swine CAFOs, respectively. Pig-1-Bac and Pig-2-Bac were also 2.87 (95% CI = 1.21, 6.80) and 3.36 (95% CI = 1.34, 8.41) times as prevalent when 48 hour antecedent rainfall was greater than versus less than the mean, respectively. Results suggest diffuse and overall poor sanitary quality of surface waters where swine CAFO density is high. Pig-1-Bac and Pig-2-Bac are useful for tracking off-site conveyance of swine fecal wastes into surface waters proximal to and downstream of swine CAFOs and during rain events. PMID:25600418

  9. Analysis of underground and surface waters of the dump of the solid communal waste

    Directory of Open Access Journals (Sweden)

    Almášová Kristína

    1997-06-01

    Full Text Available The paper deals with the contamination of underground and surface waters in the surroundings of the dump of the solid communal waste at the locality Cemjata in the East Slovakia,as well as with the development of the contamination in the surrounding of the dump depending on the time on the basis of the analysisof samples withdrawn from the net of drillholes in the observed area. In the area investigated there is described geological, geomorphological, climatic and hydrogeological situation, as well as the dump itself. The results acquired show that the contamination of the area brought about by medium size industrial and agricultural activity in the vicinity of the dump of the solid communal waste and inside the area investigated is comparable with the dangerous effects of the dump of the solid communal waste.

  10. Characterization and electrical properties of chitosan for waste water treatment

    Science.gov (United States)

    Saengkaew, Phannee; Chantanachai, Kanittha; Cheewajaroen, Kulthawat; Nimsiri, Woraporn

    2016-05-01

    Chitosan extracted from shrimp shell waste was characterized in order to use for the industrial wastewater treatment. By XRF technique, the qualitative and semi-quantitative analyses of pure chitosan were performed with the relative compositions of Ca, Mg, Si, Fe, Al, and Na of 0.321%, 0.738%, 0.713%, 0.363%, 0.338%, and 3.858%, respectively. In the case of two types of the contaminated chitosan from the wastewater treatment before and after a process of a primary H2O2-treatment, the relative compositions of Ca, Mg, Si and Fe were obtained with an increasing of 0.356%, 1.321%, 1.536%, 0.451% and 0.406%, 1.105%, 1.178%, 0.591%, respectively. This shows that the suspended materials in the wastewater were absorbed by chitosan. By I-V Measurements, the across-through voltage of the pure chitosan disc was 0.245V±0.053 at the applied voltage of 17V, and resistance of 53.9MΩ ±10.3 at the applied voltage of 590V. After the utilization for the wastewater treatment, the across voltage of chitosan discs from two cases were 0.133V±0.047 and 0.223V±0.063, and the resistance of 122.8MΩ ±16.1 and 24.8MΩ ±5.1. The used chitosan has a lower conductivity because of a decreasing in the chitosan's electrical dipoles by combining with the suspended ions in the wastewater. Moreover, the adsorption efficiencies of chitosan for formaldehyde in the wastewater of two cases were 31.08% and 25.40%. In summary, chitosan is efficiently utilized in the wastewater treatment by absorption of the suspended materials and formaldehyde due to its molecular structure providing a good electrical property.

  11. Modeling vadose zone processes during land application of food-processing waste water in California's Central Valley.

    Science.gov (United States)

    Miller, Gretchen R; Rubin, Yoram; Mayer, K Ulrich; Benito, Pascual H

    2008-01-01

    Land application of food-processing waste water occurs throughout California's Central Valley and may be degrading local ground water quality, primarily by increasing salinity and nitrogen levels. Natural attenuation is considered a treatment strategy for the waste, which often contains elevated levels of easily degradable organic carbon. Several key biogeochemical processes in the vadose zone alter the characteristics of the waste water before it reaches the ground water table, including microbial degradation, crop nutrient uptake, mineral precipitation, and ion exchange. This study used a process-based, multi-component reactive flow and transport model (MIN3P) to numerically simulate waste water migration in the vadose zone and to estimate its attenuation capacity. To address the high variability in site conditions and waste-stream characteristics, four food-processing industries were coupled with three site scenarios to simulate a range of land application outcomes. The simulations estimated that typically between 30 and 150% of the salt loading to the land surface reaches the ground water, resulting in dissolved solids concentrations up to sixteen times larger than the 500 mg L(-1) water quality objective. Site conditions, namely the ratio of hydraulic conductivity to the application rate, strongly influenced the amount of nitrate reaching the ground water, which ranged from zero to nine times the total loading applied. Rock-water interaction and nitrification explain salt and nitrate concentrations that exceed the levels present in the waste water. While source control remains the only method to prevent ground water degradation from saline wastes, proper site selection and waste application methods can reduce the risk of ground water degradation from nitrogen compounds.

  12. Urine pretreatment for waste water processing systems. [for space station

    Science.gov (United States)

    Winkler, H. E.; Verostko, C. E.; Dehner, G. F.

    1983-01-01

    Recovery of high quality water from urine is an essential part of life support on a Space Station to avoid costly launch and resupply penalties. Water can be effectively recovered from urine by distillation following pretreatment by a chemical agent to inhibit microorganism contamination and fix volatile ammonia constituents. This paper presents the results of laboratory investigations of several pretreatment chemicals which were tested at several concentration levels in combination with sulfuric acid in urine. The optimum pretreatment formulation was then evaluated with urine in the Hamilton Standard Thermoelectric Integrated Membrane Evaporation Subsystem (TIMES). Over 2600 hours of test time was accumulated. Results of these laboratory and system tests are presented in this paper.

  13. Urine pretreatment for waste water processing systems. [for space station

    Science.gov (United States)

    Winkler, H. E.; Verostko, C. E.; Dehner, G. F.

    1983-01-01

    Recovery of high quality water from urine is an essential part of life support on a Space Station to avoid costly launch and resupply penalties. Water can be effectively recovered from urine by distillation following pretreatment by a chemical agent to inhibit microorganism contamination and fix volatile ammonia constituents. This paper presents the results of laboratory investigations of several pretreatment chemicals which were tested at several concentration levels in combination with sulfuric acid in urine. The optimum pretreatment formulation was then evaluated with urine in the Hamilton Standard Thermoelectric Integrated Membrane Evaporation Subsystem (TIMES). Over 2600 hours of test time was accumulated. Results of these laboratory and system tests are presented in this paper.

  14. Destruction of Navy Hazardous Wastes by Supercritical Water Oxidation

    Science.gov (United States)

    1994-08-01

    voltmeters and scanning thermocouple meters. The data are acquired, analyzed, filed, and displayed using software written for the LabWindows data...acquisition software from National Instruments Corporation. The code was written by NFESC in the C computer language and compiled to achieve rapid program...Hazards and operability ( HAZOP ) study of a supercritical water oxidation (SCWO) bench scale system. Cambridge, MA, Aug 1992. 8. Arthur D. Little, Inc

  15. Ground Water Issue: Phytoremediation of Contaminated Soil and Ground Water at Hazardous Waste Sites

    Science.gov (United States)

    2001-02-01

    phytomining. J. Geochem. Explor. 60(2):115-126. Rogers, R.D., and S.E. Williams. 1986. Vesicular- arbuscular mycorrhiza : influence on plant uptake of...surrounding plant roots). Fungi associated with some plant roots (i.e., mycorrhizae ) can also influence the chemical conditions within the soil...arundinacea Schreb.), revealed the importance of mycorrhizae and adding organic waste amendments in establishing plants on the metal-contaminated mine wastes

  16. Changes in soil aggregate stability under different irrigation doses of waste water

    Science.gov (United States)

    Morugán, Alicia; García-Orenes, Fuensanta; Mataix-Solera, Jorge; Arcenegui, Victoria; Bárcenas, Gema

    2010-05-01

    Freshwater availability and soil degradation are two of the most important environmental problems in the Mediterranean area acerbated by incorrect agricultural use of irrigation in which organic matter is not correctly managed, the use of low quality water for irrigation, and the inefficiency of dose irrigation. For these reasons strategies for saving water and for the restoration of the mean properties of soil are necessary. The use of treated waste water for the irrigation of agricultural land could be a good solution to these problems, as it reduces the utilization of fresh water and could potentially improve key soil properties. In this work we have been studying, for more than three years, the effects on soil properties of different doses of irrigation with waste water. Here we show the results on aggregate stability. The study is located in an agricultural area at Biar (Alicante, SE of Spain), with a crop of grape (Vitis labrusca). Three types of waters are being used in the irrigation of the soil: fresh water (control) (TC), and treated waste water from secondary (T2) and tertiary treatment (T3). Three different doses of irrigation have been applied to fit the efficiency of the irrigation to the crop and soil type: D10 (10 L m-2 every week during 17 months), D50 (50 L m-2 every fifteen days during 14 moths) and D30 (30 L m-2 every week during 6 months up to present day). The results showed a clear decrease of aggregate stability during the period we used the second dose (D50) independent of the type of water used. That dose of irrigation and frequency produced strong wetting and drying cycles (WD) in the soil, and this is suspected to be the main factor responsible for the results. When we changed the dose of irrigation to D30, reducing the quantity per event and increasing the frequency, the soil aggregate stability started to improve. This dose avoids strong drying periods between irrigation events and the aggregate stability is confirmed to be slowly

  17. Waste water processing technology for Space Station Freedom - Comparative test data analysis

    Science.gov (United States)

    Miernik, Janie H.; Shah, Burt H.; Mcgriff, Cindy F.

    1991-01-01

    Comparative tests were conducted to choose the optimum technology for waste water processing on SSF. A thermoelectric integrated membrane evaporation (TIMES) subsystem and a vapor compression distillation subsystem (VCD) were built and tested to compare urine processing capability. Water quality, performance, and specific energy were compared for conceptual designs intended to function as part of the water recovery and management system of SSF. The VCD is considered the most mature and efficient technology and was selected to replace the TIMES as the baseline urine processor for SSF.

  18. Laboratory Methods for the Measurement of Pollutants in Water and Waste Effluents

    Science.gov (United States)

    Ballinger, Dwight G.

    1971-01-01

    The requirement for accurate, precise, and rapid analytical procedures for the examination of water and waste samples requires the use of a variety of instruments. The instrumentation in water laboratories includes atomic absorption, UV-visible. and infrared spectrophotometers, automatic colorimetric analyzers, gas chromatographs and mass spectrometers. Because of the emphasis on regulatory action, attention is being directed toward quality control of analytical results. Among the challenging problems are the differentiation of metallic species in water at nanogram concentrations, rapid measurement of free cyanide and free ammonia, more sensitive methods for arsenic and selenium and improved characterization of organic contaminants.

  19. Waste water processing technology for Space Station Freedom - Comparative test data analysis

    Science.gov (United States)

    Miernik, Janie H.; Shah, Burt H.; Mcgriff, Cindy F.

    1991-01-01

    Comparative tests were conducted to choose the optimum technology for waste water processing on SSF. A thermoelectric integrated membrane evaporation (TIMES) subsystem and a vapor compression distillation subsystem (VCD) were built and tested to compare urine processing capability. Water quality, performance, and specific energy were compared for conceptual designs intended to function as part of the water recovery and management system of SSF. The VCD is considered the most mature and efficient technology and was selected to replace the TIMES as the baseline urine processor for SSF.

  20. Recycled water reuse permit renewal application for the materials and fuels complex industrial waste ditch and industrial waste pond

    Energy Technology Data Exchange (ETDEWEB)

    Name, No

    2014-10-01

    This renewal application for the Industrial Wastewater Reuse Permit (IWRP) WRU-I-0160-01 at Idaho National Laboratory (INL), Materials and Fuels Complex (MFC) Industrial Waste Ditch (IWD) and Industrial Waste Pond (IWP) is being submitted to the State of Idaho, Department of Environmental Quality (DEQ). This application has been prepared in compliance with the requirements in IDAPA 58.01.17, Recycled Water Rules. Information in this application is consistent with the IDAPA 58.01.17 rules, pre-application meeting, and the Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater (September 2007). This application is being submitted using much of the same information contained in the initial permit application, submitted in 2007, and modification, in 2012. There have been no significant changes to the information and operations covered in the existing IWRP. Summary of the monitoring results and operation activity that has occurred since the issuance of the WRP has been included. MFC has operated the IWP and IWD as regulated wastewater land treatment facilities in compliance with the IDAPA 58.01.17 regulations and the IWRP. Industrial wastewater, consisting primarily of continuous discharges of nonhazardous, nonradioactive, routinely discharged noncontact cooling water and steam condensate, periodic discharges of industrial wastewater from the MFC facility process holdup tanks, and precipitation runoff, are discharged to the IWP and IWD system from various MFC facilities. Wastewater goes to the IWP and IWD with a permitted annual flow of up to 17 million gallons/year. All requirements of the IWRP are being met. The Operations and Maintenance Manual for the Industrial Wastewater System will be updated to include any new requirements.

  1. Recycled Water Reuse Permit Renewal Application for the Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    Energy Technology Data Exchange (ETDEWEB)

    No Name

    2014-10-01

    ABSTRACT This renewal application for the Industrial Wastewater Reuse Permit (IWRP) WRU-I-0160-01 at Idaho National Laboratory (INL), Materials and Fuels Complex (MFC) Industrial Waste Ditch (IWD) and Industrial Waste Pond (IWP) is being submitted to the State of Idaho, Department of Environmental Quality (DEQ). This application has been prepared in compliance with the requirements in IDAPA 58.01.17, Recycled Water Rules. Information in this application is consistent with the IDAPA 58.01.17 rules, pre-application meeting, and the Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater (September 2007). This application is being submitted using much of the same information contained in the initial permit application, submitted in 2007, and modification, in 2012. There have been no significant changes to the information and operations covered in the existing IWRP. Summary of the monitoring results and operation activity that has occurred since the issuance of the WRP has been included. MFC has operated the IWP and IWD as regulated wastewater land treatment facilities in compliance with the IDAPA 58.01.17 regulations and the IWRP. Industrial wastewater, consisting primarily of continuous discharges of nonhazardous, nonradioactive, routinely discharged noncontact cooling water and steam condensate, periodic discharges of industrial wastewater from the MFC facility process holdup tanks, and precipitation runoff, are discharged to the IWP and IWD system from various MFC facilities. Wastewater goes to the IWP and IWD with a permitted annual flow of up to 17 million gallons/year. All requirements of the IWRP are being met. The Operations and Maintenance Manual for the Industrial Wastewater System will be updated to include any new requirements.

  2. Estimation of biological kinetic parameters from an analysis of the BOD curve of waste waters - effects of a chemical preoxidation

    Energy Technology Data Exchange (ETDEWEB)

    Berlan, F.J.; Garcia-Araya, J.F.; Alvarez, P. [Universidad de Extremadura, Badajoz (Spain). Dept. de Ingenieria Quimica y Energetica

    1997-12-31

    Urban waste waters were treated with pure ozone or combinations of ozone, hydrogen peroxide and/or UV radiation to study the course of resulting BOD (biological oxygen demand)-time profiles and to propose a kinetic model. BOD-time profiles of chemically treated waste waters show an initial lag period that first order kinetic models cannot describe. A second order kinetic model is then proposed that satisfactorily fits experimental BOD-time profiles, except when hydrogen peroxide has been used. In these cases, BOD-time profiles present the highest lag periods observed. By applying this model, three parameters are determined: the biokinetic constant (k) which is an index of the biological removal rate; the potential amount of biodegradable matter (BOD{sub T}), and the measure of the size of inocula and microbial activities of microorganisms ({lambda}). The model was checked with experimental results of BOD-time profiles corresponding to both untreated and chemically ozonated urban waste waters. Ozonated waste waters showed the highest values of k and BOD{sub T}, which implies an improvement of waste water biodegradability after ozonation. However, values of {lambda} corrsponding to ozonated waste waters presented lower values than those of untreated waste waters. This was due to the lag period observed in the BOD-time profile, which was a consequence of a lack of micro-organism acclimation to ozonated waste waters. The effect of the ozone dose, pH and carbonates during oxonation on COD (chemical oxygen demand) and the above indicated parameters was also studies. The results suggest that ozonolysis, the direct molecular ozone way of reaction, due to its selective character, increases the biodegradability of waste water more than other chemically advancec oxidation processes based on hydroxyl radical reactions. (orig./SR)

  3. Simultaneous Waste Heat and Water Recovery from Power Plant Flue Gases for Advanced Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dexin [Gas Technology Inst., Des Plaines, IL (United States)

    2016-12-31

    This final report presents the results of a two-year technology development project carried out by a team of participants sponsored by the Department of Energy (DOE). The objective of this project is to develop a membrane-based technology to recover both water and low grade heat from power plant flue gases. Part of the recovered high-purity water and energy can be used directly to replace plant boiler makeup water as well as improving its efficiency, and the remaining part of the recovered water can be used for Flue Gas Desulfurization (FGD), cooling tower water makeup or other plant uses. This advanced version Transport Membrane Condenser (TMC) with lower capital and operating costs can be applied to existing plants economically and can maximize waste heat and water recovery from future Advanced Energy System flue gases with CO2 capture in consideration, which will have higher moisture content that favors the TMC to achieve higher efficiency.

  4. Investigation of the Performance of a Heat Pump Using Waste Water as a Heat Source

    Directory of Open Access Journals (Sweden)

    Ali Kahraman

    2009-08-01

    Full Text Available In this research, a water-water heat pump system using waste water as a heat source, a type that is not often used in Turkey and the World, was experimentally modeled. The experiments were performed under the conditions of simulated waste water temperature values of 20 °C, 30 °C and 40 °C. Inlet and outlet water temperatures of the evaporator and condenser, water flow rates in the evaporator and condenser circuits, pressures at the compressor inlet and outlet and power consumption of the system were measured. The heating coefficients of performance were calculated based on the measurements. It was found that the maximum temperature in the energy storage tank was about 50.6 °C. For the heat source temperatures of 20 °C, 30 °C and 40 °C, the heating coefficients of the performance of the system became 3.36, 3.43 and 3.69, respectively, 6 min. after the start time of the experiments and then they were decreased to 1.87, 1.83 and 1.77 with increasing water temperature in the condenser tank. The mean uncertainty value of the measurement parameters was found to be about ±2.47%. Finally, for the purpose of meeting hot water need as well as floor heating system requirements, it is seen that energy quality level of a waste low grade temperature heat source can be increased by using a heat pump system.

  5. Research for waste water treatment technology with low production of excessive active sludge

    Directory of Open Access Journals (Sweden)

    Makisha Nikolay

    2017-01-01

    Full Text Available The article reflects the possibility to create a technological scheme of waste water treatment of domestic and similar type of sewage within minimal amount of excessive active sludge by means of bioreactors with immobilized feed. There are various aspects to be considered: technical, economic, social and ecological. According to the above it is strongly needed to provide a combination of proper waste water treatment, minimal sludge formation and the possibility for a further use of the sludge. One of the ways to achieve the goal above is to use an immobilized feed in the aeration tank. The necessary experiments were carried out in the department of waste water treatment and water ecology. The article includes the scheme of the facility and other parameters of the experiments, which has been carried. The combination of aerobic and anaerobic processes helps to provide proper quality of integrated biological treatment. Chambers of the aeration reactor were also equipped with the polymer feed of various structures. The sludge treatment that was also strongly needed was made by means of aerobic stabilization with the use of ejecting aeration. The results of experiment showed a good effect in both components – sewage and sludge treatment. Afterwards there was also an industrial model launched which confirmed the results of the previous stage.

  6. Thermal energy from waste water in Zwolle, Netherlands; Thermische energie uit afvalwater in Zwolle

    Energy Technology Data Exchange (ETDEWEB)

    Kluck, J.; Van den Bulk, J.; Flameling, T.; De Brauw, H.

    2011-11-15

    An overview is provided of the results of a study on the options of heat recovery from the (waste) water chain in Zwolle, the Netherlands. The feasibility was checked by looking at three research questions: (1) What does the heat system in the water chain look like and what are the best locations for heat recovery?; (2) What are the possible effects of heat recovery on the functioning of the waste water treatment plant?; and (3) Which techniques are available for heat recovery from the waste water chain? [Dutch] Een overzicht wordt gegeven van de resultaten van een studie naar de mogelijkheden voor het terugwinnen van warmte uit de (afval)waterketen in Zwolle. De haalbaarheid is onderzocht aan de hand van drie onderzoeksvragen: (1) Hoe ziet de warmtehuishouding in de waterketen eruit en wat zijn de beste locaties voor warmteterugwinning?; (2) Wat zijn de mogelijke effecten van warmteterugwinning op het functioneren van een afvalwaterzuiveringsinstallatie?; en (3) Welke technieken bestaan er voor de terugwinning van warmte uit de afvalwaterketen?.

  7. Heavy Metals in Water Percolating Through Soil Fertilized with Biodegradable Waste Materials.

    Science.gov (United States)

    Wierzbowska, Jadwiga; Sienkiewicz, Stanisław; Krzebietke, Sławomir; Bowszys, Teresa

    2016-01-01

    The influence of manure and composts on the leaching of heavy metals from soil was evaluated in a model lysimeter experiment under controlled conditions. Soil samples were collected from experimental fields, from 0- to 90-cm layers retaining the layout of the soil profile layers, after the second crop rotation cycle with the following plant species: potatoes, spring barley, winter rapeseed, and winter wheat. During the field experiment, 20 t DM/ha of manure, municipal sewage sludge composted with straw (SSCS), composted sewage sludge (SSC), dried granular sewage sludge (DGSS), "Dano" compost made from non-segregated municipal waste (CMMW), and compost made from municipal green waste (CUGW) was applied, i.e., 10 t DM/ha per crop rotation cycle. The concentrations (μg/dm(3)) of heavy metals in the leachate were as follows: Cd (3.6-11.5) manganese or zinc, whereas the concentrations of the other metals increased to the levels characteristic of unsatisfactory water quality and poor water quality classes. The copper and nickel content of percolating water depended on the concentration of those metals introduced into the soil with organic waste materials. The concentrations of Cd in the leachate increased, whereas the concentrations of Cu and Ni decreased with increasing organic C content of organic fertilizers. The widening of the C/N ratio contributed to Mn leaching. The concentrations of Pb, Cr, and Mn in the percolating water were positively correlated with the organic C content of soil.

  8. Improved waste water vapor compression distillation technology. [for Spacelab

    Science.gov (United States)

    Johnson, K. L.; Nuccio, P. P.; Reveley, W. F.

    1977-01-01

    The vapor compression distillation process is a method of recovering potable water from crewman urine in a manned spacecraft or space station. A description is presented of the research and development approach to the solution of the various problems encountered with previous vapor compression distillation units. The design solutions considered are incorporated in the preliminary design of a vapor compression distillation subsystem. The new design concepts are available for integration in the next generation of support systems and, particularly, the regenerative life support evaluation intended for project Spacelab.

  9. Use of magnetic filtration in waste water treatment

    Directory of Open Access Journals (Sweden)

    Katarína Štefušová

    2012-12-01

    Full Text Available The materials based on iron oxides are widely used for toxic elements removal. Magnetite nanoparticles are good sorbentof arsenic from water, but their practical use is quite limited. The solid/liquid separation of material in the nano-scale range is difficult.In this study, the synthetic magnetite was studied as arsenic sorbent from aqueous solutions with maximum sorption capacityof 40.4 mg/g. Magnetic properties of magnetite allow a relatively simple magnetic separation after arsenic sorption.

  10. The presence of medicines and drugs in wastes water; Presencia de farmacos y drogas en aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Postigo, C.; Gros, M.; Kuster, M.; Petrovic, M.; Lopez de Alda, M.; Barcelo, D.

    2008-07-01

    Medicines and drugs are emerging pollutants. The presence of medicines, especially oestrogens, in the aquatic environment has already been much studied; more recently attention has also turned to detecting drugs. Their effect on the aquatic environment is through waste waters, after they have passed through a waste water treatment plant or not. The levels of each of the types of substances considered medicines in general, estrogens and drugs and their subgroups, detected in waste waters are reported together with the relationship between these levels and aspects such as the volume of the substances consumed, their metabolism and where they end up in the environment. (Author) 106 refs.

  11. Irrigation Use of Food Industry Waste Water (Ispol’ Zovaniye na Orosheniye Stochnykh vod Predpriyatiy Pishchevoy Promyshlennosti),

    Science.gov (United States)

    1978-04-01

    AD AOSa 1434 COLD REGIONS RESEARCH AND ENGINEERING LAB HANOVER N H F/s 2/3 IRRIGATION USE OF FOOD INDUSTRY WASTE WATER (ISPOL’ ZOVANITE NA——ETC (U...OF STAMMRDS Mc~OCOPv RUOUmON TEsT cs~~T C RREL Draft Translation 675 1 _ _ _ IRRIGATION USE OF FOOD INDUSTRY WASTE WATER V.1. Dodolina Apri’ 1978 :1...ED IRR IGATION USE OF FOOD INDUSTRY WASTE WATER __________________________ S. iRFoRMIi~~~~POrRfPonT-uwtaseR_d~- 7. AUTII OR(.) S. CONT R ACT OR G R

  12. Flexible Distributed Energy & Water from Waste for Food and Beverage Industry

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Ruijie

    2013-12-30

    Food and beverage plants inherently consume a large quantity of water and generate a high volume of wastewater rich in organic content. On one hand, water discharge regulations are getting more stringent over the time, necessitating the use of different technologies to reduce the amount of wastewater and improve the effluent water quality. On the other hand, growing energy and water costs are driving the plants to extract and reuse valuable energy and water from the wastewater stream. An integrated waste-tovalue system uses a combination of anaerobic digester (AD), reciprocating gas engine/boiler, membrane bioreactor (MBR), and reverse osmosis (RO) to recover valuable energy as heat and/or electricity as well as purify the water for reuse. While individual anaerobic digestion and membrane bioreactors are being used in increasing numbers, there is a growing need to integrate them together in a waste-to-value system for enhanced energy and water recovery. However, currently operation of these systems relies heavily on the plant operator to perform periodic sampling and off-line lab analysis to monitor the system performance, detect any abnormal condition due to variations in the wastewater and decide on appropriate remedial action needed. This leads to a conservative design and operation of these systems to avoid any potential upsets that can destabilize the system.

  13. Poly β-hydroxybutyrate production by Bacillus subtilis NG220 using sugar industry waste water.

    Science.gov (United States)

    Singh, Gulab; Kumari, Anish; Mittal, Arpana; Yadav, Anita; Aggarwal, Neeraj K

    2013-01-01

    The production of poly β-hydroxybutyrate (PHB) by Bacillus subtilis NG220 was observed utilizing the sugar industry waste water supplemented with various carbon and nitrogen sources. At a growth rate of 0.14 g h(-1) L(-1), using sugar industry waste water was supplemented with maltose (1% w/v) and ammonium sulphate (1% w/v); the isolate produced 5.297 g/L of poly β-hydroxybutyrate accumulating 51.8% (w/w) of biomass. The chemical nature of the polymer was confirmed with nuclear magnetic resonance, Fourier transform infrared, and GC-MS spectroscopy whereas thermal properties were monitored with differential scanning calorimetry. In biodegradability study, when PHB film of the polymer (made by traditional solvent casting technique) was subjected to degradation in various natural habitats like soil, compost, and industrial sludge, it was completely degraded after 30 days in the compost having 25% (w/w) moisture. So, the present study gives insight into dual benefits of conversion of a waste material into value added product, PHB, and waste management.

  14. Recovering Y and Eu from Waste Phosphors Using Chlorination Roasting—Water Leaching Process

    Directory of Open Access Journals (Sweden)

    Mingming Yu

    2016-10-01

    Full Text Available Recovering Y and Eu from waste phosphors using chlorination roasting followed by a water leaching process was investigated in this study. Firstly, by chlorination roasting and water leaching, Y and Eu elements present in waste phosphors were efficiently extracted into a leach solution. Secondly, the majority of the impurities in the solution can be removed by adjusting the pH to 4.5 using a Na2S and NH3·H2O solution. Thirdly, the rare earths can be precipitated afterwards by adding a H2C2O4 solution and adjusting the pH to 2.0. Then rare earth oxides (REOs can be obtained after calcining at 800 °C for 1 h. The characterization study of the waste phosphors and the rare earth oxide products was performed by XRD, XRF, and SEM-EDS analysis to determine the phase and morphological features. Influences of the factors, such as roasting temperatures and time, the addition of ammonium chloride on the roasting of waste phosphors, as well as the pH and the amount of oxalates on the precipitation of Y and Eu, were investigated. The maximum grade (99.84% of mixed rare earth oxides and recovery rate (87.35% of Y and Eu were obtained at the optimized conditions.

  15. In Vivo Cytogenotoxicity and Oxidative Stress Induced by Electronic Waste Leachate and Contaminated Well Water

    Directory of Open Access Journals (Sweden)

    Adeyinka M. Gbadebo

    2013-07-01

    Full Text Available Environmental, plant and animal exposure to hazardous substances from electronic wastes (e-wastes in Nigeria is increasing. In this study, the potential cytogenotoxicity of e-wastes leachate and contaminated well water samples obtained from Alaba International Electronic Market in Lagos, Nigeria, using induction of chromosome and root growth anomalies in Allium cepa, and micronucleus (MN in peripheral erythrocytes of Clarias gariepinus, was evaluated. The possible cause of DNA damage via the assessments of liver malondialdehyde (MDA, catalase (CAT, reduced glutathione (GSH and superoxide dismutase (SOD as indicators of oxidative stress in mice was also investigated. There was significant (p < 0.05 inhibition of root growth and mitosis in A. cepa. Cytological aberrations such as spindle disturbance, C-mitosis and binucleated cells, and morphological alterations like tumor and twisting roots were also induced. There was concentration-dependent, significant (p < 0.05 induction of micronucleated erythrocytes and nuclear abnormalities such as blebbed nuclei and binucleated erythrocytes in C. gariepinus. A significant increase (p < 0.001 in CAT, GSH and MDA with concomitant decrease in SOD concentrations were observed in the treated mice. Pb, As, Cu, Cr, and Cd analyzed in the tested samples contributed significantly to these observations. This shows that the well water samples and leachate contained substances capable of inducing somatic mutation and oxidative stress in living cells; and this is of health importance in countries with risk of e-wastes exposure.

  16. Poly β-Hydroxybutyrate Production by Bacillus subtilis NG220 Using Sugar Industry Waste Water

    Directory of Open Access Journals (Sweden)

    Gulab Singh

    2013-01-01

    Full Text Available The production of poly β-hydroxybutyrate (PHB by Bacillus subtilis NG220 was observed utilizing the sugar industry waste water supplemented with various carbon and nitrogen sources. At a growth rate of 0.14 g h−1 L−1, using sugar industry waste water was supplemented with maltose (1% w/v and ammonium sulphate (1% w/v; the isolate produced 5.297 g/L of poly β-hydroxybutyrate accumulating 51.8% (w/w of biomass. The chemical nature of the polymer was confirmed with nuclear magnetic resonance, Fourier transform infrared, and GC-MS spectroscopy whereas thermal properties were monitored with differential scanning calorimetry. In biodegradability study, when PHB film of the polymer (made by traditional solvent casting technique was subjected to degradation in various natural habitats like soil, compost, and industrial sludge, it was completely degraded after 30 days in the compost having 25% (w/w moisture. So, the present study gives insight into dual benefits of conversion of a waste material into value added product, PHB, and waste management.

  17. Poly β-Hydroxybutyrate Production by Bacillus subtilis NG220 Using Sugar Industry Waste Water

    Science.gov (United States)

    Singh, Gulab; Kumari, Anish; Mittal, Arpana; Yadav, Anita; Aggarwal, Neeraj K.

    2013-01-01

    The production of poly β-hydroxybutyrate (PHB) by Bacillus subtilis NG220 was observed utilizing the sugar industry waste water supplemented with various carbon and nitrogen sources. At a growth rate of 0.14 g h−1 L−1, using sugar industry waste water was supplemented with maltose (1% w/v) and ammonium sulphate (1% w/v); the isolate produced 5.297 g/L of poly β-hydroxybutyrate accumulating 51.8% (w/w) of biomass. The chemical nature of the polymer was confirmed with nuclear magnetic resonance, Fourier transform infrared, and GC-MS spectroscopy whereas thermal properties were monitored with differential scanning calorimetry. In biodegradability study, when PHB film of the polymer (made by traditional solvent casting technique) was subjected to degradation in various natural habitats like soil, compost, and industrial sludge, it was completely degraded after 30 days in the compost having 25% (w/w) moisture. So, the present study gives insight into dual benefits of conversion of a waste material into value added product, PHB, and waste management. PMID:24027767

  18. PHYTOREMEDIATION OF NAPROXEN IN WASTE WATER USING Vetiver zizaniodes

    Directory of Open Access Journals (Sweden)

    NURATIQAH MARSIDI

    2016-08-01

    Full Text Available In this study, the capability of Vetiver zizaniodes in removing the pharmaceutical-based product, naproxen from wastewater was evaluated. The plant was exposed to naproxen at concentrations ranging from 50, 100, 300 and 500 mgL-1 for duration up to 56 days. Several wastewater parameters including pH, dissolved oxygen (DO, mgL-1 and oxygen-reduction potential (ORP, mV were recorded during the experimental runs where pH and ORP exhibited significant different (p < 0.05. At the end of the exposure, 81.5%, 64.5% and 60.9% of naproxen were removed at 100, 300 and 500 mgL-1 concentration, respectively. The interaction between time, system and concentration showed significant naproxen removal (p < 0.05 from water and soil. Phytostimulation and phytostabilization played a major role for naproxen removal when there was an activity of the bacteria presence in the soil around the roots of the plants. Hence, V. zizaniodes is a potential plant in remediating pharmaceuticalcontaminated water and could act as a phytoremediator plant.

  19. Culture of Freshwater Prawns (Macrobrachium Rosenbergii) Using Geothermal Waste Water

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, William C.

    1978-01-01

    The farming of freshwater prawns (Macrobrachium rosenbergii) in geothermal-heated water has been demonstrated to be feasible in a non-tropical climate. The husbandry of prawns is being done in two outdoor raceway ponds, 9.1 m by 2.5 m and 29 m by 3.5 m that are 1.2 m deep. The ponds are not shielded from the ambient climate which during the winter months has recorded air temperatures as low as -20oC. A selected brood stock is held in a small spawning building where larvae are hatched in artificial saltwater and reared to the post-larvae stage which makes the facility self-supporting. This project is providing a model for potential investors to utilize the low-temperature geothermal resources in the western United States for warm water aquaculture. Zooplankton, macroscopic crusteans, from a local euthrophic lake are being fed to the post-larvae and adult prawns in addition to prepared commercial dry pelleted foods to keep operational costs at a minimum. Initial measurements of growth and weight gains indicate the production of two crops of prawns per year at seven to the pond is possible. No work on intensive culture has been done. Plans to enlarge the facility and do work on developing intensive culture are being considered.

  20. A study conducted on the impact of effluent waste from machining process on the environment by water analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kovoor, Punnose P.; Idris, Mohd Razif [Kuala Lumpur Univ. (Malaysia). Inst. of Product Design and Manufacturing, IPROM; Hassan, Masjuki Haji [Univ. of Malaya, Kuala Lumpur (Malaysia). Dept. of Mechanical Engineering; Tengku Yahya, Tengku Fazli [Kuala Lumpur Univ., Melaka (Malaysia). Malaysian Inst. of Chemical and Bio Engineering Technology, MICET

    2012-11-01

    Ferrous block metals are used frequently in large quantities in various sectors of industry for making automotive, furniture, electrical and mechanical items, body parts for consumables, and so forth. During the manufacturing stage, the block metals are subjected to some form of material removal process either through turning, grinding, milling, or drilling operations to obtain the final product. Wastes are generated from the machining process in the form of effluent waste, solid waste, atmospheric emission, and energy emission. These wastes, if not recycled or treated properly before disposal, will have a detrimental impact on the environment through air, water, and soil pollution. The purpose of this paper is to determine the impact of the effluent waste from the machining process on the environment through water analysis. A twofold study is carried out to determine the impact of the effluent waste on the water stream. The preliminary study consists of a scenario analysis where five scenarios are drawn out using substances such as spent coolant, tramp oil, solvent, powdered chips, and sludge, which are commonly found in the effluent waste. The wastes are prepared according to the scenarios and are disposed through the Institute of Product Design and Manufacturing (IPROM) storm water drain. Samples of effluent waste are collected at specific locations according to the APHA method and are tested for parameters such as pH, ammoniacal nitrogen, dissolved oxygen, biochemical oxygen demand, chemical oxygen demand, and total suspended solids. A subsequent study is done by collecting 30 samples of the effluent waste from the machining operations from two small- and medium-scale enterprise locations and the IPROM workshop to test the quality of water. The results obtained from the tests showed high values of chemical oxygen demand, ammoniacal nitrogen, and total suspended solids when compared with the Standard B specification for inland water bodies as specified by the

  1. Recycling Possibility of the Salty Food Waste by Pyrolysis and Water Scrubbing

    Directory of Open Access Journals (Sweden)

    Ye-Eun Lee

    2017-02-01

    Full Text Available Salty food waste is difficult to manage with previous methods such as composting, anaerobic digestion, and incineration, due to the hindrance of salt and the additional burden to handle high concentrations of organic wastewater produced when raw materials are cleaned. This study presents a possibility of recycling food waste as fuel without the burden of treatment washing with water by pyrolyzing and scrubbing. For this purpose, salty food waste with 3% NaCl was made using 10 materials and pyrolysis was conducted at temperature range between 200–400 °C. The result was drawn from elementary analysis (EA, X-ray photoelectron spectroscopy (XPS analysis, atomic absorption spectrophotometry (AAS analysis, water quality analysis and calorific value analysis of char, washed char, and washing water. The result of the EA showed that NaCl in food waste could be volatilized at a low pyrolysis temperature of 200–300 °C and it could be concentrated and fixed in char at a high pyrolysis temperature of 300–400 °C. The XPS analysis result showed that NaCl existed in form of chloride. Through the Na content result of the AAS analysis, NaCl remaining in char after water scrubbing was determined to be less than 2%. As the pyrolysis temperature increased, the chemical oxygen demand (COD value of scrubbing water decreased rapidly, but the total phosphorus and nitrogen contents decreased gradually. The cleaned pyrolysis char showed an increase of higher heating value (HHV approximately 3667–9920 J/g due to the removal of salt from the char and, especially at 300–400 °C, showed a similar HHV with normal fossil fuels. In conclusion, salty food waste, which is pyrolyzed at a temperature of 300–400 °C and cleaned by water, can be utilized as high-energy refuse derived fuel (RDF, without adverse effects, due to the volatilization of Cl and an additional process of contaminated water.

  2. Reuse of process water in a waste-to-energy plant: An Italian case of study.

    Science.gov (United States)

    Gardoni, Davide; Catenacci, Arianna; Antonelli, Manuela

    2015-09-01

    The minimisation of water consumption in waste-to-energy (WtE) plants is an outstanding issue, especially in those regions where water supply is critical and withdrawals come from municipal waterworks. Among the various possible solutions, the most general, simple and effective one is the reuse of process water. This paper discusses the effectiveness of two different reuse options in an Italian WtE plant, starting from the analytical characterisation and the flow-rate measurement of fresh water and process water flows derived from each utility internal to the WtE plant (e.g. cooling, bottom ash quenching, flue gas wet scrubbing). This census allowed identifying the possible direct connections that optimise the reuse scheme, avoiding additional water treatments. The effluent of the physical-chemical wastewater treatment plant (WWTP), located in the WtE plant, was considered not adequate to be directly reused because of the possible deposition of mineral salts and clogging potential associated to residual suspended solids. Nevertheless, to obtain high reduction in water consumption, reverse osmosis should be installed to remove non-metallic ions (Cl(-), SO4(2-)) and residual organic and inorganic pollutants. Two efficient solutions were identified. The first, a simple reuse scheme based on a cascade configuration, allowed 45% reduction in water consumption (from 1.81 to 0.99m(3)tMSW(-1), MSW: Municipal Solid Waste) without specific water treatments. The second solution, a cascade configuration with a recycle based on a reverse osmosis process, allowed 74% reduction in water consumption (from 1.81 to 0.46m(3)tMSW(-1)). The results of the present work show that it is possible to reduce the water consumption, and in turn the wastewater production, reducing at the same time the operating cost of the WtE plant. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Beneficial use of waste heat in municipal water supply. Technical report TR-79-3

    Energy Technology Data Exchange (ETDEWEB)

    Porter, R.W.

    1979-08-01

    The relatively low temperature of thermal discharges from steam-electric power plants makes waste-heat utilization difficult without modification of the power cycle and attendant reduction in electrical energy generated. In situ beneficial use of waste heat by direct once-through condenser discharge into a municipal water supply is discussed. Computations are presented regarding the matching of flow rates, heat losses in distribution and energy savings. A number of benefits and penalties are also assessed qualitatively including legal and operational aspects and reliability. Especially attractive are improvements in electrical generating efficiency, and savings in water-heater energy. Secondary advantages include alleviation of pipe freeze up in winter and improved efficiency of slightly heated waste-water treatment. Penalties include additional pumping power for distribution in the water supply due to increased back pressure on the steam turbines which employ condensers cooled by the water they pump. Additional chlorine is also required to maintain a residual concentration in the distribution system. There may also be difficulties with public acceptance of water preheated by up to about 24/sup 0/F, especially in summer. The water supply of greater Chicago and 4880 MW(e) of colocated fossil-fired load-following generating capacity were analyzed as a hypothetical test case. It was concluded that the net annual energy savings is 23 x 10/sup 12/B, equivalent to 4 million bbl of oil, with a net savings in cost of $12./capita for the population of 4.66 m. While not developed for energy conservation purposes, three actual systems with operating experience are summarized. In order to determine feasibility of application, site-specific systems analysis is required.

  4. MULTILAYER POROUS COMPOSITE FROM WASTE GLASS FOR WATER FILTRATION

    Directory of Open Access Journals (Sweden)

    M. P. Aji

    2015-07-01

    Full Text Available Multilayer porous composite have been produced through the heating process at temperature T=700oC for 2.5 h. Single layered porous composite was made with a varied mass percentage of from PEG polymer  1% to 10%. Double-layered porous composite were made by the arrangement of porosity (4:3%, (4:2% and (3:2%, while the three-layers porous composite have an arrangement (4:3:2%. Performance of multilayer porous composite for water filtration with pollutants of methylene blue 100 ppm was estimated from the absorbance spectrum. Rejection of methylene blue pollutants from single layered porous composite increases when the fraction of PEG polymer tend to be smaller in the matrix. Meanwhile, the double layered porous composite has a degradation of methylene blue pollutants are better than one layer. Triple layered porous composite have good performance for the water filtration where all the pollutants of methylene blue be able to be filtered.   Komposit pori berlapis telah dihasilkan dengan proses pemanasan pada temperatur T=700oC selama 2.5 jam. Komposit pori satu lapis dibuat dengan variasi persen massa polimer PEG 1% hingga 10%. Komposit pori dua lapis dibuat dengan susunan porositas (4:3%, (4:2% dan (3:2%, sedangkan komposit pori tiga lapis memiliki susunan porositas (4:3:2%. Kinerja komposit pori berlapis untuk filter air dengan polutan methylene blue 100 ppm diestimasi dari spektrum absorbansi. Rejeksi polutan methylene blue dari komposit pori satu lapis meningkat saat fraksi polimer PEG cenderung lebih kecil dalam matrik komposit. Sedangkan, komposit pori dua lapis memiliki kemampuan untuk degradasi polutan methylene blue yang lebih baik dari satu lapis. Komposit pori tiga lapis memiliki kinerja yang baik untuk filter air dimana seluruh polutan methylene blue mampu disaring. 

  5. Quality Assessment of Waste Waters Generated by some Important Hospitals from Cluj County

    Directory of Open Access Journals (Sweden)

    Ocsana Ileana Opriş

    2016-04-01

    Full Text Available Hospitals produce large quantities of waste water that may contain various potentially hazardous materials. Moreover, these effluents usually do not undergo any specific treatment before being discharged into the urban sewage networks. As a consequence, a proper management of hospital effluents is vital. In the present study, the quality of the effluents generated by 11 important hospitals in Cluj County was investigated. The analysed parameters were: pH, chemical and biochemical oxygen demand, total suspended solids, residual free chlorine, and detergents. For all the effluents, the biochemical oxygen demand and the detergents content were within the permissible limits for waste water discharged in the urban sewerage system, while the other parameters exceeded the permissible limits.

  6. Changes in the Optical Properties of Simulated Shuttle Waste Water Deposits: Urine Darkening

    Science.gov (United States)

    Albyn, Keith; Edwards, David; Alred, John

    2003-01-01

    Manned spacecraft have historically dumped the crew generated waste water overboard, into the environment in which the spacecraft operates, sometimes depositing the waste water on the external spacecraft surfaces. The change in optical properties of wastewater deposited on spacecraft external surfaces, from exposure to space environmental effects, is not well understood. This study used nonvolatile residue (NVR) from Human Urine to simulate wastewater deposits and documents the changes in the optical properties of the NVR deposits after exposure to ultra violet(UV)radiation. Twenty four NVR samples of, 0-angstromes/sq cm to 1000-angstromes/sq cm, and one sample contaminated with 1 to 2-mg/sq cm were exposed to UV radiation over the course of approximately 6151 equivalent sun hours (ESH). Random changes in sample mass, NVR, solar absorbance, and infrared emission were observed during the study. Significant changes in the UV transmittance were observed for one sample contaminated at the mg/sq cm level.

  7. Advanced Energy and Water Recovery Technology from Low Grade Waste Heat

    Energy Technology Data Exchange (ETDEWEB)

    Dexin Wang

    2011-12-19

    The project has developed a nanoporous membrane based water vapor separation technology that can be used for recovering energy and water from low-temperature industrial waste gas streams with high moisture contents. This kind of exhaust stream is widely present in many industrial processes including the forest products and paper industry, food industry, chemical industry, cement industry, metal industry, and petroleum industry. The technology can recover not only the sensible heat but also high-purity water along with its considerable latent heat. Waste heats from such streams are considered very difficult to recover by conventional technology because of poor heat transfer performance of heat-exchanger type equipment at low temperature and moisture-related corrosion issues. During the one-year Concept Definition stage of the project, the goal was to prove the concept and technology in the laboratory and identify any issues that need to be addressed in future development of this technology. In this project, computational modeling and simulation have been conducted to investigate the performance of a nanoporous material based technology, transport membrane condenser (TMC), for waste heat and water recovery from low grade industrial flue gases. A series of theoretical and computational analyses have provided insight and support in advanced TMC design and experiments. Experimental study revealed condensation and convection through the porous membrane bundle was greatly improved over an impermeable tube bundle, because of the membrane capillary condensation mechanism and the continuous evacuation of the condensate film or droplets through the membrane pores. Convection Nusselt number in flue gas side for the porous membrane tube bundle is 50% to 80% higher than those for the impermeable stainless steel tube bundle. The condensation rates for the porous membrane tube bundle also increase 60% to 80%. Parametric study for the porous membrane tube bundle heat transfer

  8. Sustainable treatment potential of mixed algal consortia for domestic waste water: Growth and mixotrophy

    Directory of Open Access Journals (Sweden)

    Priyanka Murthy

    2015-04-01

    Full Text Available The increasing levels of generation of nutrient-rich waste water pose serious challenge. Conventional biological and chemical methods of waste water treatment have failed in meeting sustainability challenges. Naturally occurring mixed algal species reared in mixotrophic growth modes have been deployed to recover nutrients (N and P from domestic wastewater after anaerobic digestion. In this paper, we present the results pertaining to growth and mixotrophy. Pilot-scale operation shows that the cultivation methods adopted and the use of naturally selected species lead to a tendency among these species to clump at certain stages of growth that in turn float or settle rapidly making algal harvest and thereby the nutrient recovery processes energy efficient. The highest settling rate was found to be 6.37 ± 1.6 g/m2/d. Mixotrophy was seen to contribute 15 – 24 % across the various algal consortia in wastewater (polyculture.

  9. Advanced primary treatment of waste water using a bio-flocculation-adsorption sedimentation process

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, W.; Ting, Y.P.; Chen, J.P.; Xing, C.H. [National Univ., Singapore (Singapore). Dept. of Chemical and Environmental Engineering; Shi, S.Q. [Tsinghua Univ., Beijing (China). Dept. of Environmental Science and Engineering

    2000-07-01

    An advanced primary treatment process for a municipal waste water was systematically studied, using a bio-flocculation-adsorption, sedimentation and stabilization process (BSS). It was shown that the organic removal efficiency was higher than that of the traditional primary treatment processes but lower than that of the traditional secondary treatment processes. Both adsorption and bio-flocculation played an important role in the removal of pollutants. The activated sludge within the bio-flocculation-adsorption tank could be considered a bio-flocculent which improved the quality of the effluent from the primary treatment process. As the effluent of the BSS process did not meet the requirements for a typical secondary effluent, the process may be regarded as an advanced (or enhanced) primary treatment process, suitable for waste water containing a high concentration of suspended solids and colloidal particles. (orig.)

  10. Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization

    OpenAIRE

    2013-01-01

    The growth of anodic electroactive microbial biofilms from waste water inocula in a fed-batch reactor is demonstrated using a three-electrode setup controlled by a potentiostat. Thereby the use of potentiostats allows an exact adjustment of the electrode potential and ensures reproducible microbial culturing conditions. During growth the current production is monitored using chronoamperometry (CA). Based on these data the maximum current density (j max) and the coulombic efficiency (CE) are d...

  11. Construction of a new waste-water treatment plant, building 676, route Maxwell

    CERN Multimedia

    TS Department

    2008-01-01

    A new waste-water treatment plant is being constructed on Route Maxwell to treat the effluents from the TS/MME/CCS surface treatment workshops. For this purpose, excavation work is being performed in two separate locations along Route Maxwell, causing a slight disruption to traffic in these areas. Site access through Gate C should, however, be maintained. The work is scheduled to continue until February 2009.

  12. STS-55 crewmembers repair waste water tank on OV-102's middeck

    Science.gov (United States)

    1993-01-01

    Three STS-55 crewmembers participate in an inflight maintenance (IFM) exercise to counter problems experienced with a waste water tank below Columbia's, Orbiter Vehicle (OV) 102's, middeck. Mission Specialist 3 (MS3) Bernard A. Harris, Jr, inside the airlock, holds middeck floor access panel MD54G and looks below at Pilot Terence T. Henricks who is in the bilge area. Commander Steven R. Nagel is lying on middeck floor at the left.

  13. Large Scale Magnetic Separation of Solanum tuberosum Tuber Lectin from Potato Starch Waste Water

    Science.gov (United States)

    Safarik, Ivo; Horska, Katerina; Martinez, Lluis M.; Safarikova, Mirka

    2010-12-01

    A simple procedure for large scale isolation of Solanum tuberosum tuber lectin from potato starch industry waste water has been developed. The procedure employed magnetic chitosan microparticles as an affinity adsorbent. Magnetic separation was performed in a flow-through magnetic separation system. The adsorbed lectin was eluted with glycine/HCl buffer, pH 2.2. The specific activity of separated lectin increased approximately 27 times during the isolation process.

  14. Assessment of the Genotoxicity of olive mill waste water (OMWW) with the Vicia faba Micronucleus test

    Energy Technology Data Exchange (ETDEWEB)

    El Hajjouji, H.; Pinelli, E.; Revel, J. C.; Hafidi, M.

    2009-07-01

    Olive mill waste water (OMW) can cause serious environmental hazards in olive producing countries, especially around the Mediterranean basin. In Morocco, olive mills are noe of the foremost polluters: the volume of OMW produced annually is estimated at 250 000 m{sup 3} during the season of production. the present study concerns the genotoxicity of OMW generated in mills producing olive oil in Morocco. (Author)

  15. STS-55 crewmembers repair waste water tank on OV-102's middeck

    Science.gov (United States)

    1993-01-01

    Three STS-55 crewmembers participate in an inflight maintenance (IFM) exercise to counter problems experienced with a waste water tank below Columbia's, Orbiter Vehicle (OV) 102's, middeck. Mission Specialist 3 (MS3) Bernard A. Harris, Jr, inside the airlock, holds middeck floor access panel MD54G and looks below at Pilot Terence T. Henricks who is in the bilge area. Commander Steven R. Nagel is lying on middeck floor at the left.

  16. The Experience of Implementation of Innovative Technology of Quarry Waste Water Purifying in Kuzbass Open Pit

    Science.gov (United States)

    Lesin, Yu V.; Hellmer, M. C.

    2016-08-01

    Among all industries in Kuzbass (Western Siberia, Russia) the coal industry provides the most environmental threat. However, the construction of new and maintenance of existing open pit mines do not often correspond to the tasks of improving the environmental safety of surface mining. So the article describes the use of innovative quarry waste water purifying technology implemented in Kuzbass open pit mine «Shestaki». This technology is based on using artificial filter arrays made of overburden rock.

  17. Monitoring the anaerobic treatment of waste waters; Control en la depuracion anaerobia de aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Leon de Mora, C.; Molina Cantero, F.J.; Romero Galey, F.J.; Gomez Banderas, J.M. [Dpto. Tecnologia Electronica. Esc. Univ. Politec. Sevilla, Sevilla, (Spain)

    1997-04-01

    This article describes the results obtained in developing a system for monitoring sewage treatment. The system, supported by a PC, includes a fuzzy logic control algorithm for monitoring the anaerobic treatment of waste waters on the basis of data from sensors attached to an industrial robot (PLC). Its most outstanding features is that it is also capable of evaluating new monitoring strategies using parameters not originally included. (Author) 6 refs.

  18. COD and Color Removal from Textile Wastewater Using Rosa damascena Watering Waste Ash

    Directory of Open Access Journals (Sweden)

    Rabbani D.1 PhD,

    2015-01-01

    Full Text Available Aims Several methods have been used for textile wastewater treatment. The aim of this study was to evaluate the efficiency of Rosa damascena watering waste ash for COD and color removal from textile wastewater. Materials & Methods Rose watering waste was gathered from one of the Kashan processing plants. The raw wastewater sample was taken from one of the textile industries in Kashan countryside. All experiments were run in the fixed volume (1L of textile wastewater, contact times (15, 30, 45, 60, 75, and 90min, pHs (3, 5, 7, and 9 and different doses of rose watering waste (500, 1000, 2000, and 4000mg at the room temperature (25°C. Moreover, biosorption kinetic studies for COD were done using the pseudo first and pseudo second order models. Findings The amount of COD and color removal were increased by contact time increasing from 15 to 60min and the maximum removal of COD (50.3% and color (31.4% were seen at minute 60. Therefore, the contact time of 60min was chosen as the optimum contact time for the first step. The maximum amount of COD (51.9% and color (32.9% removal were seen at pH=5 and biosorbent dose of 2000mg. Changes at pH and biosorbent dose had significant effects (p<0.05 on amount of COD and color removal. Conclusion The optimum condition for removing COD and color from textile wastewater is at contact time 60min, pH=5 and biosorbent dose of 2000mg. Rosa damascena watering waste ash was more effective on the COD removal than the color.

  19. Undulative induction electron accelerator for the waste and natural water purification systems

    CERN Document Server

    Kulish, Victor V; Gubanov, I V

    2001-01-01

    The project analysis of Undulative Induction Accelerator (EH - accelerator) for the waste and natural water purification systems is accomplished. It is shown that the use of the four-channel design of induction block and the standard set of auxiliary equipment (developed earlier for the Linear Induction Accelerators - LINACs) allow to construct commercially promising purification systems. A quality analysis of the accelerator is done and the optimal parameters are chosen taking into account the specific sphere of its usage.

  20. Microorganism and Agricultural Based Biosorbents Towards Removal of Cadmium from Waste-Water: An Overview.

    Science.gov (United States)

    Pal, Souvik; Mukherjee, Subhankar; Bhattacharyya, Nabarun

    2017-01-01

    Non-degradable and persistent nature of Cadmium (Cd) poses high toxicity to human, plants and animals. Several industrial processes generated wastes are the main anthropogenic pathway through which Cd enters into the environment. Although, World Health Organization (WHO) has set the limit of Cd in drinking water is 0.005 mg L-1, the industrial activities release much higher concentrations of metal ions to the water stream than the prescribed limits, which leads to the increasing health hazards and environmental pollution. To address this issue, one of the major applicable solutions is the treatment or purification of contaminated water and effluents. The implantation of wastewater treatment systems aims to minimize environmental impacts, but ultimately generates waste materials, such as sewage sludge, which must be properly recycled. In this review, we focus on the research efforts being made towards the removal of Cd (II) from waste waters using biological means with a special emphasis on the microorganism and agricultural based biosorbents. Mechanistic pathway towards removal of Cd (II) ions from the wastewater, efficiency of the adsorbents and the factors affecting the process have been studied with specific examples. Also the recent patents related to this area have been taken into considerations to understand applicability of microorganism and agricultural based biosorbents. This overview presents various scientific reports towards low-cost microorganism and agricultural based biosorbents for efficient removal of Cd (II) by producing less toxic waste and the future perspective of the process. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  1. Water hyacinth for phytoremediation of radioactive waste simulate contaminated with cesium and cobalt radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Saleh, H.M., E-mail: hosamsaleh70@yahoo.com [Radioisotope Department, Nuclear Research Center, Atomic Energy Authority, Dokki 12311, Giza (Egypt)

    2012-01-15

    Highlights: Black-Right-Pointing-Pointer Phytoremediation of radioactive wastes containing {sup 137}Cs and {sup 60}Co radionuclides. Black-Right-Pointing-Pointer Using water hyacinth for radioactive waste treatment. Black-Right-Pointing-Pointer Bioaccumulation of radionuclides from radioactive waste streams. Black-Right-Pointing-Pointer Factors affecting bioaccumulation of {sup 137}Cs and {sup 60}Co using floating plants. - Abstract: Phytoremediation is based on the capability of plants to remove hazardous contaminants present in the environment. This study aimed to demonstrate some factors controlling the phytoremediation efficiency of live floating plant, water hyacinth (Eichhornia crassipes), towards the effluents contaminated with {sup 137}Cs and/or {sup 60}Co. Cesium has unknown vital biological role for plant while cobalt is one of the essential trace elements required for plant. The main idea of this work i.e. using undesirable species, water hyacinth, in purification of radiocontaminated aqueous solutions has been receiving much attention. The controlling factors such as radioactivity concentration, pH values, the amount of biomass and the light were studied. The uptake rate of radiocesium from the simulated waste solution is inversely proportional to the initial activity content and directly proportional to the increase in mass of plant and sunlight exposure. A spiked solution of pH Almost-Equal-To 4.9 was found to be the suitable medium for the treatment process. The uptake efficiency of {sup 137}Cs present with {sup 60}Co in mixed solution was higher than if it was present separately. On the contrary, uptake of {sup 60}Co is affected negatively by the presence of {sup 137}Cs in their mixed solution. Sunlight is the most required factor for the plant vitality and radiation resistance. The results of the present study indicated that water hyacinth may be a potential candidate plant of high concentration ratios (CR) for phytoremediation of radionuclides

  2. Research on ground water pollution by leacheate of waste dump of open pit coal mine

    Institute of Scientific and Technical Information of China (English)

    LIU Zhi-bin; YAN Hong-kun; WANG Zhao-jun

    2008-01-01

    On the basis of investigation and research on the pollution source and pollution pathway of Yujiagou area, by the ground water quality analysis and the leaching and soaking experiments of the gangue, reliable data were obtained. The experiment results prove that these inorganic salt elements are easily dissolved by the water. The main pollu-tion factors in the ground water are consisted with the main pollution factor in the leading water of the gangue. By synthetically analyzing, a conclusion is shown that the salts in the leacheate of the waste dump of open pit coal mine are the primary pollution source for groundwater of Yujiagou area. An assessment is made about the degree of pollution of the ground water in the study area.

  3. The Research on Atmospheric Pressure Water Vapour Plasma Generation and Application for the Destruction of Wastes

    Directory of Open Access Journals (Sweden)

    Viktorija Grigaitiene

    2013-01-01

    Full Text Available In the Lithuanian Energy Institute an experimental atmospheric pressure Ar/water vapour plasma torch has been designed and tested. The power of plasma torch was estimated 40 ÷ 69 kW, the mean temperature of plasma jet at the exhaust nozzle was 2300÷2900K. The chemical compositionof water vapour plasma was established from the emission spectrum lines at 300 ÷ 800nm range. The main species observed in Ar/water vapour plasma were: Ar, OH, H, O, Cu. The experiments on water vapour steam reforming were performed. The results confirmed that water vapour plasma has the unique properties – high enthalpy and environmentally friendly conditions. It could be employed for environmental purposes such as destruction of wastes into simple molecules or conversion to synthetic gas.

  4. Treatment Of Municipal Waste Water In Salem City

    Directory of Open Access Journals (Sweden)

    T. Subramani

    2014-06-01

    Full Text Available The treatment processes and quality of the final effluent produced by tertiary filtration for phosphorus removal typically meet state criteria for wastewater reclamation. Reuse of this high quality effluent can be an attractive alternative to direct discharge into surface waters in situations where restrictive NPDES permit limitations apply. In this report, EPA region 10 presents observations of advanced wastewater treatment installed in Salem city. These facilities employ chemical addition and a range of filtration technologies which have proven to be very effective at producing an effluent containing low levels of phosphorus. Tamil Nadu Government Made A Policy Announcement Of Providing Under Ground Sewerage Scheme In All Urban Local Bodies In A Phased Manner At District Head Quarter Towns. The Municipal Sewerage Collection Network Systems Are Implemented and the Household Sewage Are Collected and Moved to the Collection Chamber of STP. The STP consists of various unit operations and processes to treat the raw sewage into the final treated effluent quality as per the stipulated standards. The project will have construction phase and operation phase impacts which have been assessed and the Environment Impact Assessment has been prepared.

  5. Life Cycle Assessment of Waste Water Treatment Plants in Ireland

    Directory of Open Access Journals (Sweden)

    Greg Mcnamara

    2016-09-01

      The Urban Wastewater Treatment Directive 91/271/EEC introduced a series of measures for the purpose of protecting the environment from the adverse effects of effluent discharge from wastewater treatment plants.  There are environmental costs associated with attaining the required level of water quality set out in the directive such as greenhouse gas emissions due to energy production, and ecotoxicity from sludge application to land.  The goal of this study is to assess the environmental costs in an Irish context, focusing specifically on the effects of variation in scale and discharge limitation. Life cycle assessment is the analytical tool used to evaluate the environmental impact.  The life cycle impact assessment methodology developed by the Centre of Environmental Science, Leiden University (2010 has been adopted and implemented using GaBi 6.0 life cycle assessment software.  Two plants of varying size and location were chosen for the study. The study found that energy consumption and sludge application to land are the largest contributors to the overall environmental impact associated with the treatment process at both plants.  Economies of scale were observed in energy usage during secondary aeration.   

  6. An Integrated Planning for Reuse and Wetland Strategy of Waste Water from Rural Enterprises:A Case Study

    Institute of Scientific and Technical Information of China (English)

    ZHOUQI-XING; R.W.BELL; 等

    1995-01-01

    A waste water reuse engineering was designed and then operated in Hongshan,a small town in Zhejiang Province,China,in order to solve pollution and shortage of water resources due to the development of rural enterprises.The results showed that series-structure design and cycling model were two effective modes of saving water and decreasing pollutants into environment,and wetland strategy should be a component part of the integrated planning for waste water reuse of rural enterprises.This case study could provide a basis for the optimum utilization and pollution avoidance of water resources.

  7. HEAVY METAL ANALYSIS IN WASTE WATER SAMPLES FROM VALEA ŞESEI TAILING POND

    Directory of Open Access Journals (Sweden)

    I. L. MELENTI

    2011-03-01

    Full Text Available Heavy metal analysis in waste water samples from Valea Şesei tailing pond. The mining of ore deposits and the processing and smelting of copper at Roşia Poieni have resulted in an increase of the toxic elements concentration within all components of the environment in the area. Valea Şesei tailing pond is a waste deposit for the Roşia Poieni open-pit and is the biggest tailing pond in Romania. In October 2009, we determined 8 heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni and Zn in 10 waste water samples. This water flows under the tailing dam, through the Valea Şesei stream, into the Arieş River, the water’s pH varies between 3 and 4. The heavy metals concentration exceeds with orders of magnitude. In the stream the concentrations are much lower, but still exceed the admitted levels. The results show that the tailing pond is a pollution hot spot in the area affecting the environment.

  8. Development of a household waste treatment subsystem, volume 1. [with water conservation features

    Science.gov (United States)

    Gresko, T. M.; Murray, R. W.

    1973-01-01

    The domestic waste treatment subsystem was developed to process the daily liquid and non-metallic solid wastes provided by a family of four people. The subsystem was designed to be connected to the sewer line of a household which contained water conservation features. The system consisted of an evaporation technique to separate liquids from solids, an incineration technique for solids reduction, and a catalytic oxidizer for eliminating noxious gases from evaporation and incineration processes. All wastes were passed through a grinder which masticated the solids and deposited them in a settling tank. The liquids were transferred through a cleanable filter into a holding tank. From here the liquids were sprayed into an evaporator and a spray chamber where evaporation occurred. The resulting vapors were processed by catalytic oxidation. Water and latent energy were recovered in a combination evaporator/condenser heat exchanger. The solids were conveyed into an incinerator and reduced to ash while the incineration gases were passed through the catalytic oxidizer along with the processed water vapor.

  9. Polymeric nanofibers for the removal of Cr(III) from tannery waste water.

    Science.gov (United States)

    El-Sherif, Iman Y; Tolani, Sagar; Ofosu, Kennedy; Mohamed, Ola A; Wanekaya, Adam K

    2013-11-15

    We demonstrate the use of cysteine-modified polymer nanofibers for the rapid and efficient removal of Cr(III) from real tannery waste water samples. Various parameters such as pH, load of nanofibers and time of exposure were optimized to achieve maximum removal. The optimum parameters were found to be 0.1 mg of nanofibers per mL of tannery waste water with a pH of 5.5 and an exposure time of 45 min. Almost 99% Cr(III) was removed at these ideal conditions thus demonstrating the efficacy of our material. The maximum removal capacity at these ideal conditions was estimated to be approximately 1.75 g of chromium/gram of polymeric material. This is probably due to a variety of factors including the apparent high surface to volume ratio exhibited by these nanofibers and also due to the availability of numerous cysteine groups that are known to have high binding affinities with heavy metal ions. These nanoscale polymeric materials show great potential towards the removal of heavy metal cations from waste waters. Published by Elsevier Ltd.

  10. Genetic damage induced by electronic waste leachates and contaminated underground water in two prokaryotic systems.

    Science.gov (United States)

    Alabi, A Okunola; Bakare, A Adekunle

    2017-07-14

    The inappropriate and unsafe management practices related to disposal and recycling of electronic wastes in Nigeria has led to environmental and underground water contamination. Reports on the level and type of contamination as well as the possible DNA damage effects of this contamination are insufficient. This study evaluated the DNA damaging potential of e-waste simulated and raw leachates, and its contaminated underground water using the SOS chromotest on Escherichia coli PQ37 and the Ames Salmonella fluctuation test on Salmonella typhimurium strains TA98 and TA100, without and with metabolic activation. Physico-chemical parameters of the samples were also analyzed. The result of the Ames test showed induction of base pair substitution and frameshift mutation by the test samples. However, the TA100 was the more responsive strain for the three samples in terms of mutagenic index in the absence and presence of metabolic activation. The SOS chromotest results were in agreement with those of the Ames Salmonella fluctuation test. Nevertheless, the E. coli PQ37 system was slightly more sensitive than the Salmonella assay for detecting genotoxins in the tested samples. Lead, cadmium, manganese, copper, nickel, chromium, arsenic, and zinc contents analyzed in the samples were believed to play a significant role in the observed DNA damage in the microbial assays. The results of this study showed that e-waste simulated and raw leachates, and its contaminated underground water are of potential mutagenic and genotoxic risks to the exposed human populace.

  11. An ecological engineering approach for keeping water from reaching interred wastes in arid or semiarid regions

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, J.E. [Idaho State Univ., Pocatello, ID (United States)

    1997-12-31

    This paper describes application of a soil-plant cover system (SPCS) to preclude water from reaching interred wastes in arid and semiarid regions. Where potential evapotranspiration far exceeds precipitation, water can be kept from reaching buried wastes by (1) providing a sufficiently deep cap of soil to store precipitation that falls while plants are dormant and (2) maintaining plant cover to deplete soil moisture during the growing season, thereby emptying the storage reservoir. Research at the Idaho National Engineering Laboratory (INEL) has shown that 2 m of soil is adequate to store moisture from snowmelt and spring rains. Healthy stands of perennial grasses and shrubs adapted to the INEL climate use all available soil moisture, even during a very wet growing season. However, burrowing by small mammals or ants may affect the performance of a SPCS by increasing infiltration of water. Intrusion barriers of gravel and cobble can be used to restrict burrowing, but emplacement of such barriers affects soil moisture storage and plant rooting depths. A replicated field experiment to investigate the implications of those effects is in progress. Incorporation of an SPCS should be considered in the design of isolation barriers for shallow land burial of hazardous wastes in and regions.

  12. Enhanced energy efficiency in waste water treatment plants; Steigerung der Energieeffizienz auf kommunalen Klaeranlagen

    Energy Technology Data Exchange (ETDEWEB)

    Haberkern, Bernd; Maier, Werner; Schneider, Ursula [iat - Ingenieurberatung fuer Abwassertechnik, Darmstadt und Stuttgart, Darmstadt (Germany)

    2008-03-15

    In order to implement the requests of EU-IPCC-directive in a new decree for waste water treatment in Germany, best available techniques have to be defined to optimize energy efficiency in waste water treatment plants (WWTP). Therefore energy efficiency was investigated for common treatment processes and new technologies like membrane filtration, co-digestion or phosphorus recycling. In addition, the occurrence of different technologies for waste water and sludge treatment was evaluated for different size ranges of treatment plants (in population equivalents, PE) nationwide in Germany. The definition of actual and aimed values for specific energy consumption (in kWh/(PE.a)) allowed to calculate the potential energy savings in WWTP and the additional consumption due to new processes on a national level. Under consideration of the reciprocations between optimized energy consumption in WWTP and operation practice, toe-holds to increase energy efficiency according to their relevancy for the national balance could be listed. Case studies prove the feasibility of the investigated techniques and allow proposals for minimum requirements in legal regulation concerning energy efficiency in WWTP. (orig.)

  13. Assessment of the efficacy of Aspergillus sp. EL-2 in textile waste water treatment.

    Science.gov (United States)

    Gomaa, Ola M; Kareem, Hussein Abd El; Fatahy, Reham

    2012-04-01

    Fungal biomass has the ability to decolorize a wide variety of dyes successfully through a number of mechanisms. A brown rot isolate, previously identified as Aspergillus sp. EL-2, was used in the aerobic treatment of textile waste water efficiently. In the current work, the treated waste water was tested chemically using more than one combined treatment. Microbial toxicity, phytotoxicity, genotoxicity and cytotoxicity were also studied to assess the toxicity level for each treatment. The obtained data suggest that the contribution of more than one mode of treatment is essential to ensure complete destruction of the by-products. The use of gamma irradiation (25 kGy) after the bioremediation step led to the decrease of the by-products of biodegradation as observed by visible spectrum and Fourier transfer infra red spectroscopy (FT-IR). The toxicity assessment presented variable results indicating the need for more than one toxicity test to confirm the presence or absence of hazardous compounds. Brown rot fungus could be used efficiently in the treatment of textile waste water without the risk of obtaining high carcinogenic or genotoxic compounds, especially if combined treatment is employed.

  14. Cadmium distribution in forest ecosystems irrigated with treated municipal waste water and sludge

    Energy Technology Data Exchange (ETDEWEB)

    Sidle, R.C.; Sopper, W.E.

    1976-01-01

    Treated municipal waste water was irrigated in an abandoned old field area from 1964 to 1974 and in a mixed hardwood area (old gamelands) from 1964 to 1974. Total applications of Cd in the old field and old gamelands areas were 0.47 and 0.61 kg/ha, respectively. White spruce (Picea glauca Moench Voss.) and wild strawberry (Fragaria virginiana Duchesne) foilage sampled from the old field showed no increase in Cd concentrations due to effluent irrigation, while goldenrod (Solidago sp. Ait.) had lower Cd levels in the treated area than in the unirrigated control area. Foilage sampled from red maple (Acer rubrum L.), white oak (Quercus alba L.), and wild sarsaparilla (Aralia nudicaulis L.), in the old gamelands, showed no increase in Cd as a result of waste water irrigation. Soil Cd levels were not significantly affected by waste water irrigation in either area, except for the increase in soil Cd in the 0 to 5 cm depth of the old gamelands. The Cd/Zn ratios of the vegetation foilage were not significantly different between the treated and control areas.

  15. Carbon-Based Functional Materials Derived from Waste for Water Remediation and Energy Storage.

    Science.gov (United States)

    Ma, Qinglang; Yu, Yifu; Sindoro, Melinda; Fane, Anthony G; Wang, Rong; Zhang, Hua

    2017-04-01

    Carbon-based functional materials hold the key for solving global challenges in the areas of water scarcity and the energy crisis. Although carbon nanotubes (CNTs) and graphene have shown promising results in various fields of application, their high preparation cost and low production yield still dramatically hinder their wide practical applications. Therefore, there is an urgent call for preparing carbon-based functional materials from low-cost, abundant, and sustainable sources. Recent innovative strategies have been developed to convert various waste materials into valuable carbon-based functional materials. These waste-derived carbon-based functional materials have shown great potential in many applications, especially as sorbents for water remediation and electrodes for energy storage. Here, the research progress in the preparation of waste-derived carbon-based functional materials is summarized, along with their applications in water remediation and energy storage; challenges and future research directions in this emerging research field are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Radiological characterization of waste products at a Catalan drinking water treatment plant - Radiological characterization of waste products of one Catalan drinking water treatment plant

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, A.; Montana, M.; Serrano, I.; Blazquez, S.; Duch, M.A. [Institut de Tecniques Energetiques. Universitat Politecnica de Catalunya, ETSEIB. Diagonal 647. 08028 Barcelona (Spain); Montes, S.; Ganzer, M.; Devesa, R. [Aigues de Barcelona, AGBAR. Laboratory, General Batet, 5-7, 08028 Barcelona (Spain)

    2014-07-01

    Conventional Drinking Water Treatment Plants (DWTP) have a fairly standard sequence of processes which essentially consist in solids separation using physical processes such as settling and filtration, and chemical processes such as coagulation and disinfection. Consequently large quantities of solid wastes or sludge are generated every year by DWTP. These solid wastes may contain all kind of pollutants, including significant levels of radioactivity and may cause a radiological impact on the operating personnel, but also on the public if the waste is recycled, e.g. the use of sludge as fertilizer or cement manufacturing. In this work it has been studied the radioactivity content of waste products of one DWTP. The selected DWTP treats water mainly taken from the Llobregat River and also ground water. The treatment plant has a maximum treatment capacity of 5.5 m{sup 3}/s, and provides almost 50% of the annual drinking water in Barcelona metropolitan area (population equivalent of the plant: 4,856,579). This plant has been selected taking into account both variations in water source and the treatment applied. During the period July 2007 - March 2009 a temporal study of radio-nuclides present in sludge produced by the decanter cleaning process was conducted. The temporal study was made taking into account the particular weather conditions in Spain, at least one sampling campaign per season. In these samples naturally gamma emitters from the {sup 238}U and {sup 232}Th series were detected with activities similar to the arithmetic mean found in Spanish soils so no increase in natural radiation are produced by the uses of these sludge. Furthermore, no seasonal tendency could be observed in the studied period for both series within the uncertainties associated with the results. Radiological hazard effects were also evaluated by the external hazard index because one of the end-uses of this sludge is the cement manufacturing. In 2009 the treatment plant was modified and

  17. Toxicity of Water and Sediment Samples Collected in the Vicinity of the Mixed Waste Management Facility, 1995 and 1996

    Energy Technology Data Exchange (ETDEWEB)

    Specht, W.L. [Westinghouse Savannah River Company, AIKEN, SC (United States)

    1996-07-01

    Three rounds of toxicity tests were conducted on water collected from eleven locations in the vicinity of the Mixed Waste Management Facility and four reference locations between January 1995 and April 1996.

  18. Purifying waste waters in the surface treatment industry; Depuracion de las aguas residuales en la industria de tratamiento de superficies

    Energy Technology Data Exchange (ETDEWEB)

    Queralt Torrell, R.; Martinez Hidalgo, E. [Generalitat de Catalunya. Barcelona (Spain)

    1999-07-01

    The electrolytic coating industry in Spain comprises some 2,000 firms whose waste waters are highly problematic, mainly due to the presence of heavy metals and cyanides. This article sets out series of internal measures for conserving the baths, reducing entrainment and optimising washes, thereby minimising the volume and concentration of the waste waters. It also discusses the advantages and disadvantages of the different chemical reagents employed in the physicochemical treatment of waste waters during the oxidation/reduction and metal precipitation processes. In addition, it mentions other techniques such as the use of ion exchange resins, membranes and electro-coagulation, which are becoming increasingly widespread. Finally, it offers a summary report on 11 waste water treatment facilities installed in different surface treatment factories. (Author) 21 refs.

  19. Guidelines for the disposal of dangerous and toxic wastes so as to minimize or prevent environmental and water pollution

    CSIR Research Space (South Africa)

    Rudd, RT

    1978-01-01

    Full Text Available Modern society is producing ever increasing quantities of dangerous and/or toxic wastes, which require safe and effective disposal if they are not to pose a threat to our water supplies or the environment in general....

  20. Phosphorus dynamics in soils irrigated with reclaimed waste water or fresh water - A study using oxygen isotopic composition of phosphate

    Science.gov (United States)

    Zohar, I.; Shaviv, A.; Young, M.; Kendall, C.; Silva, S.; Paytan, A.

    2010-01-01

    Transformations of phosphate (Pi) in different soil fractions were tracked using the stable isotopic composition of oxygen in phosphate (??18Op) and Pi concentrations. Clay soil from Israel was treated with either reclaimed waste water (secondary, low grade) or with fresh water amended with a chemical fertilizer of a known isotopic signature. Changes of ??18Op and Pi within different soil fractions, during a month of incubation, elucidate biogeochemical processes in the soil, revealing the biological and the chemical transformation impacting the various P pools. P in the soil solution is affected primarily by enzymatic activity that yields isotopic equilibrium with the water molecules in the soil solution. The dissolved P interacts rapidly with the loosely bound P (extracted by bicarbonate). The oxides and mineral P fractions (extracted by NaOH and HCl, respectively), which are considered as relatively stable pools of P, also exhibited isotopic alterations in the first two weeks after P application, likely related to the activity of microbial populations associated with soil surfaces. Specifically, isotopic depletion which could result from organic P mineralization was followed by isotopic enrichment which could result from preferential biological uptake of depleted P from the mineralized pool. Similar transformations were observed in both soils although transformations related to biological activity were more pronounced in the soil treated with reclaimed waste water compared to the fertilizer treated soil. ?? 2010 Elsevier B.V.

  1. APPROACHES TO DEVELOPMENT OF THE METHODOLOGY OF RECONSTRUCTION OF WASTE WATER TREATMENT PLANTS

    Directory of Open Access Journals (Sweden)

    Gogina Elena Sergeevna

    2012-10-01

    WWTPs fail to perform proper treatment due to their being worn-out and obsolete. However a tougher legislation accelerates their reconstruction. Approaches to the WWTP reconstruction should demonstrate a strong economic and technological base. The author proposes a new algorithm for their reconstruction. A sensible combination of the principles of WWTP restructuring, development of new fine wastewater cleaning methods, and assimilation of new materials and chemical agents will help resolve the vital problem of waste water discharge into Russia's water bodies. This is the first methodology of reconstruction of WWTPs developed on the basis of the above concept and supported by practical implementation.

  2. Sediment filtration can reduce the N load of the waste water discharge - a full-scale lake experiment

    Science.gov (United States)

    Aalto, Sanni L.; Saarenheimo, Jatta; Karvinen, Anu; Rissanen, Antti J.; Ropponen, Janne; Juntunen, Janne; Tiirola, Marja

    2016-04-01

    European commission has obliged Baltic states to reduce nitrate load, which requires high investments on the nitrate removal processes and may increase emissions of greenhouse gases, e.g. N2O, in the waste water treatment plants. We used ecosystem-scale experimental approach to test a novel sediment filtration method for economical waste water N removal in Lake Keurusselkä, Finland between 2014 and 2015. By spatially optimizing the waste water discharge, the contact area and time of nitrified waste water with the reducing microbes of the sediment was increased. This was expected to enhance microbial-driven N transformation and to alter microbial community composition. We utilized 15N isotope pairing technique to follow changes in the actual and potential denitrification rates, nitrous oxide formation and dissimilatory nitrate reduction to ammonium (DNRA) in the lake sediments receiving nitrate-rich waste water input and in the control site. In addition, we investigated the connections between observed process rates and microbial community composition and functioning by using next generation sequencing and quantitative PCR. Furthermore, we estimated the effect of sediment filtration method on waste water contact time with sediment using the 3D hydrodynamic model. We sampled one year before the full-scale experiment and observed strong seasonal patterns in the process rates, which reflects the seasonal variation in the temperature-related mixing patterns of the waste water within the lake. During the experiment, we found that spatial optimization enhanced both actual and potential denitrification rates of the sediment. Furthermore, it did not significantly promote N2O emissions, or N retention through DNRA. Overall, our results indicate that sediment filtration can be utilized as a supplemental or even alternative method for the waste water N removal.

  3. Technological and hygiene-sanitary aspects of using biologically pure process waste watern in the systems of technical water supply

    OpenAIRE

    Ushakov, Vasily Yakovlevich; Solodov, G. А.

    2007-01-01

    According to sanitary-toxicological factors biologically purified waste water of chemical enterprise are referred to low-toxic substances, are not allergens, do not posses irritant action on mucous tunics and skin and are suitable for recycling water system makeup. Crucial factors of reusing these waters are their corrosive activity, susceptibility to mineral salt accumulation and bioaccretion.

  4. Individual treatment of hotel and restaurant waste water in rural areas.

    Science.gov (United States)

    Van Hulle, S W H; Ghyselbrecht, N; Vermeiren, T J L; Depuydt, V; Boeckaert, C

    2012-01-01

    About 25 hotels, restaurants and pubs in the rural community Heuvelland are situated in the area designated for individual water treatment. In order to meet the legislation by the end of 2015, each business needs to install an individual waste water treatment system (IWTS). To study this situation, three catering businesses were selected for further research. The aim of the study was to quantify the effluent quality and to assess IWTS performance for these catering businesses. First of all, the influence of discharging untreated waste water on the receiving surface water was examined. The results showed a decrease in water quality after the discharge point at every business. With the collected data, simulations with the software WEST were performed. With this software two types of IWTSs with different (buffer) volumes were modelled and tested for each catering business. The first type is a completely mixed activated sludge reactor and the second type is a submerged aerobic fixed-bed reactor. The results of these simulations demonstrate that purification with an IWTS is possible if the capacity is large enough and if an adequate buffer volume is installed and if regular maintenance is performed.

  5. Microbiology of formation waters from the deep repository of liquid radioactive wastes Severnyi.

    Science.gov (United States)

    Nazina, Tamara N; Kosareva, Inessa M; Petrunyaka, Vladimir V; Savushkina, Margarita K; Kudriavtsev, Evgeniy G; Lebedev, Valeriy A; Ahunov, Viktor D; Revenko, Yuriy A; Khafizov, Robert R; Osipov, George A; Belyaev, Sergey S; Ivanov, Mikhail V

    2004-07-01

    The presence, diversity, and geochemical activity of microorganisms in the Severnyi repository of liquid radioactive wastes were studied. Cultivable anaerobic denitrifiers, fermenters, sulfate-reducers, and methanogens were found in water samples from a depth of 162-405 m below sea level. Subsurface microorganisms produced methane from [2-(14)C]acetate and [(14)C]CO(2), formed hydrogen sulfide from Na(2) (35)SO(4), and reduced nitrate to dinitrogen in medium with acetate. The cell numbers of all studied groups of microorganisms and rates of anaerobic processes were higher in the zone of dispersion of radioactive wastes. Microbial communities present in the repository were able to utilise a wide range of organic and inorganic compounds and components of waste (acetate, nitrate, and sulfate) both aerobically and anaerobically. Bacterial production of gases may result in a local increase of the pressure in the repository and consequent discharge of wastes onto the surface. Microorganisms can indirectly decrease the mobility of radionuclides due to consumption of oxygen and production of sulfide, which favours deposition of metals. These results show the necessity of long-term microbiological and radiochemical monitoring of the repository.

  6. Significance of water fluxes in a deep arid-region vadose zone to waste disposal strategies

    Energy Technology Data Exchange (ETDEWEB)

    Johnejack, K.R.; Blout, D.O.; Sully, M.J.; Emer, D.F.; Hammermeister, D.P. [Reynolds Electrical and Engineering Co., Inc., Las Vegas, NV (United States); Dever, L.G.; O`Neill, L.J. [DOE Nevada Operations Office, Las Vegas, NV (United States). Waste Management Div.; Tyler, S.W. [Desert Research Institute, Reno, NV (United States). Water Resources Center; Chapman, J. [Desert Research Institute, Las Vegas, NV (United States). Water Resources Center

    1994-03-01

    Recently collected subsurface site characterization data have led to the development of a conceptual model of water movement beneath the Area 5 Radioactive Waste Management Site (RWMS) at the Nevada Test Site (NTS) that differs significantly from the conceptual model of water movement inherent in Resource Conservation and Recovery Act (RCRA) regulations. At the Area 5 RWMS, water fluxes in approximately the upper 75 m (250 ft) of the vadose zone point in the upward direction (rather than downward) which effectively isolates this region from the deep (approximately 250 m (820 ft)) uppermost aquifer. Standard RCRA approaches for detection and containment (groundwater monitoring and double liners/leachate collection/leak detection systems) are not able to fulfill their intended function in this rather unique hydrogeologic environment. In order to better fulfill the waste detection and containment intentions of RCRA for mixed waste disposal at the Area 5 RWMS, the Department of Energy, Nevada Operations Office (DOE/NV) is preparing a single petition for both a waiver from groundwater monitoring and an exemption from double liners with leachate collection/leak detection. DOE/NV proposes in this petition that the containment function of liners and leachate collection is better accomplished by the natural hydrogeologic processes operating in the upper vadose zone; and the detection function of groundwater monitoring and the leak detection system in liners is better fulfilled by an alternative vadose zone monitoring system. In addition, an alternative point of compliance is proposed that will aid in early detection, as well as limit the extent of potential contamination before detection. Finally, special cell design features and operation practices will be implemented to limit leachate formation, especially while the cell is open to the atmosphere during waste emplacement.

  7. Whole genome and transcriptome analyses of environmental antibiotic sensitive and multi-resistant Pseudomonas aeruginosa isolates exposed to waste water and tap water.

    Science.gov (United States)

    Schwartz, Thomas; Armant, Olivier; Bretschneider, Nancy; Hahn, Alexander; Kirchen, Silke; Seifert, Martin; Dötsch, Andreas

    2015-01-01

    The fitness of sensitive and resistant Pseudomonas aeruginosa in different aquatic environments depends on genetic capacities and transcriptional regulation. Therefore, an antibiotic-sensitive isolate PA30 and a multi-resistant isolate PA49 originating from waste waters were compared via whole genome and transcriptome Illumina sequencing after exposure to municipal waste water and tap water. A number of different genomic islands (e.g. PAGIs, PAPIs) were identified in the two environmental isolates beside the highly conserved core genome. Exposure to tap water and waste water exhibited similar transcriptional impacts on several gene clusters (antibiotic and metal resistance, genetic mobile elements, efflux pumps) in both environmental P. aeruginosa isolates. The MexCD-OprJ efflux pump was overexpressed in PA49 in response to waste water. The expression of resistance genes, genetic mobile elements in PA49 was independent from the water matrix. Consistently, the antibiotic sensitive strain PA30 did not show any difference in expression of the intrinsic resistance determinants and genetic mobile elements. Thus, the exposure of both isolates to polluted waste water and oligotrophic tap water resulted in similar expression profiles of mentioned genes. However, changes in environmental milieus resulted in rather unspecific transcriptional responses than selected and stimuli-specific gene regulation. © 2014 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  8. Techno-economic assessment of boiler feed water production by membrane distillation with reuse of thermal waste energy from cooling water

    NARCIS (Netherlands)

    Kuipers, N.J.M.; Leerdam, R.C. van; Medevoort, J. van; Tongeren, W.G.J.M. van; Verhasselt, B.; Verelst, L.; Vermeersch, M.; Corbisier, D.

    2015-01-01

    The European KIC-Climate project Water and Energy for Climate Change (WE4CC) aims at the technical demonstration, business case evaluation and implementation of new value chains for the production of high-quality water using low-grade thermal waste energy from cooling water. A typical large-scale wa

  9. Techno-economic assessment of boiler feed water production by membrane distillation with reuse of thermal waste energy from cooling water

    NARCIS (Netherlands)

    Kuipers, N.J.M.; Leerdam, R.C. van; Medevoort, J. van; Tongeren, W.G.J.M. van; Verhasselt, B.; Verelst, L.; Vermeersch, M.; Corbisier, D.

    2015-01-01

    The European KIC-Climate project Water and Energy for Climate Change (WE4CC) aims at the technical demonstration, business case evaluation and implementation of new value chains for the production of high-quality water using low-grade thermal waste energy from cooling water. A typical large-scale

  10. Report of the committee to review the use of J-13 well water in Nevada Nuclear Waste Storage Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Harrar, J.E.; Carley, J.F.; Isherwood, W.F.; Raber, E.

    1990-01-01

    The Waste Management Project Office of the Department of Energy conducted a special audit of the activities of the Nevada Nuclear Waste Storage Investigation Project at Livermore. It was noted that there never has been a comprehensive, well-documented examination of the basis for the use of J-13 water in the nuclear waste storage investigations. In each of the sections of This Report, an issue relating to the use of J-13 water has been addressed. 58 refs., 19 figs., 8 tabs.

  11. A membrane-based subsystem for very high recoveries of spacecraft waste waters

    Science.gov (United States)

    Ray, Roderick J.; Retzlaff, Sandra E.; Radke-Mitchell, Lyn; Newbold, David D.; Price, Donald F.

    1986-01-01

    This paper describes the continued development of a membrane-based subsystem designed to recover up to 99.5 percent of the water from various spacecraft waste waters. Specifically discussed are: (1) the design and fabrication of an energy-efficient reverse-osmosis (RO) breadboard subsystem; (2) data showing the performance of this subsystem when operated on a synthetic wash-water solution - including the results of a 92-day test; and (3) the results of pasteurization studies, including the design and operation of an in-line pasteurizer. Also included in this paper is a discussion of the design and performance of a second RO stage. This second stage results in higher-purity product water at a minimal energy requirement and provides a substantial redundancy factor to this subsystem.

  12. Study of contaminants stemmed from the waste water of the Ivorian Refining Company

    Directory of Open Access Journals (Sweden)

    Loukou Kouakou, Abolle Abolle, Henri Planche

    2010-11-01

    Full Text Available The dissolved hydrocarbons in waste water from the Ivorian Refining Company (SIR are analyzed by means of a GC/MS coupling. The range of molar masses represented fairly fits the range of saturated hydrocarbons present in the treated crude oils. From this, it is deduced that solubility tables of pure hydrocarbons in water are not relevant for evaluating the risk of pollution propagation in the Ebrié lagoon. Aromatics are represented almost totally by toluene which is a molecule representing more than the half of total hydrocarbons. This particularity suggests that saturated hydrocarbons with high molecular weight found in the water form micelles with the toluene behaving as a surfactant. This molecule would be the main dispersion vector of hydrocarbons pollutants. The study of the ageing of these waters shows that they contain some agent responsible for biodegradation. These agents destroy the paraffins made soluble by the toluene.

  13. A membrane-based subsystem for very high recoveries of spacecraft waste waters

    Science.gov (United States)

    Ray, Roderick J.; Retzlaff, Sandra E.; Radke-Mitchell, Lyn; Newbold, David D.; Price, Donald F.

    1986-01-01

    This paper describes the continued development of a membrane-based subsystem designed to recover up to 99.5 percent of the water from various spacecraft waste waters. Specifically discussed are: (1) the design and fabrication of an energy-efficient reverse-osmosis (RO) breadboard subsystem; (2) data showing the performance of this subsystem when operated on a synthetic wash-water solution - including the results of a 92-day test; and (3) the results of pasteurization studies, including the design and operation of an in-line pasteurizer. Also included in this paper is a discussion of the design and performance of a second RO stage. This second stage results in higher-purity product water at a minimal energy requirement and provides a substantial redundancy factor to this subsystem.

  14. Recent Developments in Microbiological Approaches for Securing Mine Wastes and for Recovering Metals from Mine Waters

    Directory of Open Access Journals (Sweden)

    D. Barrie Johnson

    2014-04-01

    Full Text Available Mining of metals and coals generates solid and liquid wastes that are potentially hazardous to the environment. Traditional methods to reduce the production of pollutants from mining and to treat impacted water courses are mostly physico-chemical in nature, though passive remediation of mine waters utilizes reactions that are catalysed by microorganisms. This paper reviews recent advances in biotechnologies that have been proposed both to secure reactive mine tailings and to remediate mine waters. Empirical management of tailings ponds to promote the growth of micro-algae that sustain populations of bacteria that essentially reverse the processes involved in the formation of acid mine drainage has been proposed. Elsewhere, targeted biomineralization has been demonstrated to produce solid products that allow metals present in mine waters to be recovered and recycled, rather than to be disposed of in landfill.

  15. Uranium mine waste water: potential source of ground water in northwestern New Mexico

    Science.gov (United States)

    Hiss, W.L.

    1977-01-01

    Substantial quantities of water are being pumped from the Morrison Formation of Late Jurassic age in uranium mines in the Grants mineral belt in northwestern New Mexico. The water often contains unacceptable amounts of dissolved uranium, radium, iron, and selenium and suspended solids, but with treatment it can be made suitable for municipal and industrial purposes. Water salvaged from current and projected mining operations constitutes the most readily available water in this otherwise water-deficient area.

  16. Removing Dissolved Silica from Waste Water with Catechol and Active Carbon

    Energy Technology Data Exchange (ETDEWEB)

    Sasan, Koroush [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Nanoscale Sciences Dept.; Brady, Patrick [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Nuclear Energy Program; Krumhansl, James L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geosciences Dept.; Nenoff, Tina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Physical Chemical and Nano Sciences Center

    2017-01-01

    Fresh water scarcity is going to be a global great challenge in the near future because of the increasing population. Our water resources are limited and, hence, water treatment and recycling methods are the only alternatives for fresh water procurement in the upcoming decades. Water treatment and recycling methods serve to remove harmful or problematic constituents from ground, surface and waste waters prior to its consumption, industrial supply, or other uses. Scale formation in industrial and domestic installations is still an important problem during water treatment. In water treatment, silica scaling is a real and constant concern for plant operations. The focus of this study is on the viability of using a combination of catechol and active carbon to remove dissolved silica from concentrated cooling tower water (CCTW). Various analytical methods, such as ICP-MS and UV-vis, were used to understand the structure-property relationship between the material and the silica removal results. UV-Vis indicates that catechol can react with silica ions and form a silica-catecholate complex. The speciation calculation of catechol and silica shows that catechol and silica bind in the pH range of 8 – 10; there is no evidence of linkage between them in neutral and acidic pHs. The silica removal results indicate that using ~4g/L of catechol and 10g/L active carbon removes up to 50% of the dissolved silica from the CCTW.

  17. Theoretical Framework for Plastic Waste Management in Ghana through Extended Producer Responsibility: Case of Sachet Water Waste

    Directory of Open Access Journals (Sweden)

    Ebo Tawiah Quartey

    2015-08-01

    Full Text Available Currently, use and disposal of plastic by consumers through waste management activities in Ghana not only creates environmental problems, but also reinforces the notion of a wasteful society. The magnitude of this problem has led to increasing pressure from the public for efficient and practical measures to solve the waste problem. This paper analyses the impact of plastic use and disposal in Ghana. It emphasizes the need for commitment to proper management of the impacts of plastic waste and effective environmental management in the country. Sustainable Solid Waste Management (SSWM is a critical problem for developing countries with regards to climate change and greenhouse gas emission, and also the general wellbeing of the populace. Key themes of this paper are producer responsibility and management of products at end of life. The paper proposes two theatrical recovery models that can be used to address the issue of sachet waste in Ghana.

  18. Theoretical Framework for Plastic Waste Management in Ghana through Extended Producer Responsibility: Case of Sachet Water Waste

    Science.gov (United States)

    Quartey, Ebo Tawiah; Tosefa, Hero; Danquah, Kwasi Asare Baffour; Obrsalova, Ilona

    2015-01-01

    Currently, use and disposal of plastic by consumers through waste management activities in Ghana not only creates environmental problems, but also reinforces the notion of a wasteful society. The magnitude of this problem has led to increasing pressure from the public for efficient and practical measures to solve the waste problem. This paper analyses the impact of plastic use and disposal in Ghana. It emphasizes the need for commitment to proper management of the impacts of plastic waste and effective environmental management in the country. Sustainable Solid Waste Management (SSWM) is a critical problem for developing countries with regards to climate change and greenhouse gas emission, and also the general wellbeing of the populace. Key themes of this paper are producer responsibility and management of products at end of life. The paper proposes two theatrical recovery models that can be used to address the issue of sachet waste in Ghana. PMID:26308016

  19. Theoretical Framework for Plastic Waste Management in Ghana through Extended Producer Responsibility: Case of Sachet Water Waste.

    Science.gov (United States)

    Quartey, Ebo Tawiah; Tosefa, Hero; Danquah, Kwasi Asare Baffour; Obrsalova, Ilona

    2015-08-20

    Currently, use and disposal of plastic by consumers through waste management activities in Ghana not only creates environmental problems, but also reinforces the notion of a wasteful society. The magnitude of this problem has led to increasing pressure from the public for efficient and practical measures to solve the waste problem. This paper analyses the impact of plastic use and disposal in Ghana. It emphasizes the need for commitment to proper management of the impacts of plastic waste and effective environmental management in the country. Sustainable Solid Waste Management (SSWM) is a critical problem for developing countries with regards to climate change and greenhouse gas emission, and also the general wellbeing of the populace. Key themes of this paper are producer responsibility and management of products at end of life. The paper proposes two theatrical recovery models that can be used to address the issue of sachet waste in Ghana.

  20. Ground-water protection, low-level waste, and below regulatory concern: What`s the connection?

    Energy Technology Data Exchange (ETDEWEB)

    Gruhlke, J.M.; Galpin, F.L. [Environmental Protection Agency, Washington, DC (United States). Office of Radiation Programs

    1991-12-31

    The Environmental Protection Agency (EPA) has a responsibility to protect ground water and drinking water under a wide variety of statutes. Each statute establishes different but specific requirements for EPA and applies to diverse environmental contaminants. Radionuclides are but one of the many contaminants subject to this regulatory matrix. Low-level radioactive waste (LLW) and below regulatory concern (BRC) are but two of many activities falling into this regulatory structure. The nation`s ground water serves as a major source of drinking water, supports sensitive ecosystems, and supplies the needs of agriculture and industry. Ground water can prove enormously expensive to clean up. EPA policy for protecting ground water has evolved considerably over the last ten years. The overall goal is to prevent adverse effects to human health, both now and in the future, and to protect the integrity of the nation`s ground-water resources. The Agency uses the Maximum Contaminant Levels (MCLs) under the Safe Drinking Water Act as reference points for protection in both prevention and remediation activities. What`s the connection? Both low-level waste management and disposal activities and the implementation of below regulatory concern related to low-level waste disposal have the potential for contaminating ground water. EPA is proposing to use the MCLs as reference points for low-level waste disposal and BRC disposal in order to define limits to the environmental contamination of ground water that is, or may be, used for drinking water.

  1. A study on chemical interactions between waste fluid, formation water, and host rock during deep well injection

    Energy Technology Data Exchange (ETDEWEB)

    Spycher, Nicolas; Larkin, Randy

    2004-05-14

    A new disposal well was drilled in the vicinity of an injection well that had been in operation for 12 years. The drilling activities provided an opportunity to assess the fate and transport of waste products injected in the nearby well, and the impact, if any, on the host geologic formation. The origin of the fluid collected while drilling the new well and the interaction between injected waste and the formation were investigated using analyses of formation waters, waste, and formation minerals, by applying traditional graphical methods and sophisticated numerical models. This approach can be used to solve a wide range of geochemical problems related to deep well injection of waste. Trilinear Piper diagrams, Stiff diagrams, and correlation plots show that the chemical characteristics of recovered fluid at the new well are similar to those of formation water. The concentrations of most major constituents in the fluid appear diluted when compared to formation water sampled at other locations. This could be explained by mixing with waste, which is less saline than formation water. However, the waste injected near the new well consists primarily of ammonia and sulfate, and these waste constituents are not found at concentrations elevated enough to suggest that significant mixing of formation water with waste has occurred. To determine whether chemical interactions between injected waste and formation could explain the chemistry of fluid recovered from the new well, we simulated the chemical reaction between waste, formation water, and the formation rock by numerical modeling. Initial modeling calculations were done using a multicomponent geochemical reaction-path model to simulate fresh waste reacting with the formation. A more complex simulation coupling flow, transport, and reaction was then run using a multicomponent geochemical reactive transport model. These numerical simulations were carried out to calculate porosity changes and evaluate chemical processes

  2. Maize Processing Waste Water Upcycling in Mexico: Recovery of Arabinoxylans for Probiotic Encapsulation

    Directory of Open Access Journals (Sweden)

    Rita Paz-Samaniego

    2016-11-01

    Full Text Available Maize is a major source of food in Mexico. In order to improve its nutritional value, maize kernel is exposed to an alkali treatment that generates large volumes of waste water containing gelling arabinoxylan. The purpose of the present study was to evaluate the capability of maize waste water arabinoxylans (MWAX to encapsulate probiotics. The rheological, structural, and microstructural characteristics of this bio-based material were also investigated. MWAX gels at 10% (w/v were able to encapsulate Bifidobacterium as probiotic model. The MWAX gel containing 1 × 107 CFU/mL of probiotics presented a storage (G′ and loss (G″ moduli of 50 and 11 Pa, respectively. The average mesh size of the MWAX gel was around 11 times smaller than the Bifidobacterium cell magnitude. MWAX gels with or without probiotics were studied using scanning electron microscopy. The interior of the Bifidobacterium loaded gels was composed of a pore-like network of MWAX through which probiotics were distributed. The probiotic encapsulating MWAX gels appeared to be less porous than the empty gels. MWAX capability to encapsulate Bifidobacterium may be important in designing probiotic encapsulating biodegradable gels and could represent an opportunity in sustainable food waste management and utilization through upcycling to value-added products.

  3. Potential of Waste Water Sludge as Environmental-Friendly Manure after UV-Treatment

    Directory of Open Access Journals (Sweden)

    Laila Zafar

    2012-10-01

    Full Text Available Due to exponential population increase in developing world, the wastewater and solid waste generation has tremendously increased and their management has become a serious health and environmental issue. A large amount of sewage sludge generated by sewage treatment plants however, can be re-used after proper segregation and treatment as fertilizer and for energy production. Hence, this study was carried out to find out the potential use of sludge produced at Islamabad Capital Territory (ICT Sewage Treatment Plant (STP as organic fertilizer. For this purpose, chemical analysis of the waste water was carried out to determine the quality of raw waste water (influent and treated waste water (effluent intermittently. Furthermore, post-wastewater treatment, sewage sludge was analyzed for its chemical characteristics, i.e., for Total Nitrogen (TN, Total Phosphorous (TP and Organic Matter (OM contents; and microbial analyses for the presence of Total Coliforms, Fecal Coliforms and E. Coli was also carried out sewage sludge was exposed to sunlight for 0, 3 and 6 months. The results were with commercial compost (control similar characteristics. According to the results, pH, EC, TSS, COD and BOD5 were found very high in the influent however, after the waste water treatment; the effluent quality was found within the limits of National Environmental Quality standards (NEQs. On the other hand, TN, TP and OM content remained high in sewage sludge as compared to the controls. In order to enumerate harmful microbes in sewage sludge, microbial analyses for Total Coliforms, Fecal Coliforms and E. coli was carried out in pre-treated, UV-post-treated and control sludge samples. According to the results, the Total and Fecal Coliforms were found very high (>16000 MPN/g whereas, E. Coli population remained between (7000-12000 MPN/g. The most important aspect noted in this study was: as the sludge aged, this figure (7,000, 12,000, and 1,600 MPN/g after 0, 3 and 6 months

  4. Use of tracers and isotopes to evaluate vulnerability of water in domestic wells to septic waste

    Science.gov (United States)

    Verstraeten, Ingrid M.; Fetterman, G.S.; Meyer, M.J.; Bullen, T.; Sebree, S.K.

    2005-01-01

    In Nebraska, a large number (>200) of shallow sand-point and cased wells completed in coarse alluvial sediments along rivers and lakes still are used to obtain drinking water for human consumption, even though construction of sand-point wells for consumptive uses has been banned since 1987. The quality of water from shallow domestic wells potentially vulnerable to seepage from septic systems was evaluated by analyzing for the presence of tracers and multiple isotopes. Samples were collected from 26 sand-point and perforated, cased domestic wells and were analyzed for bacteria, coliphages, nitrogen species, nitrogen and boron isotopes, dissolved organic carbon (DOC), prescription and nonprescription drugs, or organic waste water contaminants. At least 13 of the 26 domestic well samples showed some evidence of septic system effects based on the results of several tracers including DOC, coliphages, NH4+, NO3-, N2, ?? 15N[NO3-] and boron isotopes, and antibiotics and other drugs. Sand-point wells within 30 m of a septic system and contamination from septic waste. Copyright ?? 2005 National Ground Water Association.

  5. Changes in the Optical Properties of Simulated Shuttle Waste Water Deposits- Urine Darkening

    Science.gov (United States)

    Albyn, Keith; Edwards, David; Alred, John

    2004-01-01

    Manned spacecraft have historically dumped the crew generated waste waster overboard, into the environment in which the spacecraft operates, sometimes depositing the waste water on the external spacecraft surfaces. The change in optical properties of wastewater deposited on spacecraft external surfaces, from exposure to space environmental effects, is not well understood. This study used nonvolatile residue (NVR) from Human Urine to simulate wastewater deposits and documents the changes in the optical properties of the NVR deposits after exposure to ultra violet (UV) radiation. Twenty NVR samples of, 0-angstromes/sq cm to 1000-angstromes/sq cm, and one sample contaminated with 1 to 2-mg/sq cm were exposed to UV radiation over the course of approximately 6151 equivalent sun hours (ESH). Random changes in sample mass, NVR, solar absorbance, and infrared emission were observed during the study. Significant changes in the UV transmittance were observed for one sample contaminated at the mg/sq cm level.

  6. Changes in the Optical Properties of Simulated Shuttle Waste Water Deposits- Urine Darkening

    Science.gov (United States)

    Albyn, Keith; Edwards, David; Alred, John

    2004-01-01

    Manned spacecraft have historically dumped the crew generated waste waster overboard, into the environment in which the spacecraft operates, sometimes depositing the waste water on the external spacecraft surfaces. The change in optical properties of wastewater deposited on spacecraft external surfaces, from exposure to space environmental effects, is not well understood. This study used nonvolatile residue (NVR) from Human Urine to simulate wastewater deposits and documents the changes in the optical properties of the NVR deposits after exposure to ultra violet (UV) radiation. Twenty NVR samples of, 0-angstromes/sq cm to 1000-angstromes/sq cm, and one sample contaminated with 1 to 2-mg/sq cm were exposed to UV radiation over the course of approximately 6151 equivalent sun hours (ESH). Random changes in sample mass, NVR, solar absorbance, and infrared emission were observed during the study. Significant changes in the UV transmittance were observed for one sample contaminated at the mg/sq cm level.

  7. Removal of Pb ion from water samples using red mud (bauxite ore processing waste

    Directory of Open Access Journals (Sweden)

    Ghorbani A.

    2014-07-01

    Full Text Available This work presented the use of red mud (bauxite ore processing waste in removal of lead ions in water samples. For this 0.1 g of red mud has been used as adsorbent which suspended in 10 ml of lead solution with the concentration of 50 mg l-1 for about 1 h. After that the lead concentration in the samples taken from the red mud treated lead solution measured with atomic absorption spectroscopy (AAS. The effect of some parameter which is important in adsorption of lead on red mud such as suitable adsorbent dosage, pH and contact time of solution and adsorbent was investigated. The result shows that red mud as solid waste and low-cost adsorbent can be successfully used for the removal of lead ion from aqueous solution.

  8. A Potential Bio-Sorbent for Heavy Metals in the Remediation of Waste Water

    Directory of Open Access Journals (Sweden)

    Mohammad Laskar

    2016-12-01

    Full Text Available Bay leaves are used for flavoring in cold drinks production, in bakery goods, sauces, confectionary products and liquors. The waste generated from these sources has been valorized by attempting the remediation of waste water. Hence, adsorption of toxic metals onto Bay leaves has been investigated after optimizing the experimental parameters, namely the pH, contact time, adsorbent and Zn (II concentrations as well as the temperature of the equilibrium mixture (consisting of the metal solution in contact with the adsorbent. The participation of the constituent functional groups, of the adsorbent, was ascertained with Fourier Transform spectroscopic studies. The mode of adsorption was examined by employing important isotherm models, namely Langmuir, Freundlich and Dubinin-Radushkevich models. The adsorption process was found to follow pseudo-first order kinetic model and also followed the intraparticle diffusion up to 60 minutes of contact time. The thermodynamic parameters suggest the spontaneous nature of adsorption

  9. Preparing Coal-water Slurry by Using Concentrated Waste Water%高浓度废水配制水煤浆

    Institute of Scientific and Technical Information of China (English)

    钱志英; 李明; 孙慈忠

    2001-01-01

    This paper describes five kinds of waste water in my company replacing industrial water,and they are used to prepare coal water slurry for TEXACO gasifier,in order to reduce the drain of waste water and the environmental burden.%叙述了利用我公司内的五股废水取代工业用水配制水煤浆,供德士古燃烧,从而减少污水的排放,减轻对环保的负担。

  10. Retention of contaminants in northern natural peatlands treating mine waste waters

    Science.gov (United States)

    Palmer, Katharina; Ronkanen, Anna-Kaisa; Klöve, Björn

    2014-05-01

    The mining industry in Finland is growing, leading to an increasing number of working and proposed mine sites. As a consequence, the amount of mine waste waters created is likewise increasing. This poses a great challenge for water management and purification, as these mine waste waters can lead to severe environmental and health consequences when released to receiving water bodies untreated. In the past years, the use of natural peatlands for cost-effective passive waste water treatment has been increasing. In this study, the fate of mine water contaminants in a treatment peatland receiving process waters from the Kittilä gold mine was investigated. Special attention was paid to the fate of potentially harmful substances such as arsenic, antimony or nickel. During the 4 years of operation, the peatland removed contaminants from process waters at varying efficiencies. While arsenic, antimony and nickel were retained at high efficiencies (>80% retention), other contaminants such as zinc, sulfate or iron were not retained or even leaching from the peatland. Soil samples taken in 2013 showed a linear increase of arsenic, antimony and nickel concentration in the peatland as compared to earlier sampling times, in agreement with the good retention efficiencies for those contaminants. Measured concentrations exceeded guideline values for contaminated soils, indicating that the prolonged use of treatment peatlands leads to high soil contamination and restrict further uses of the peatlands without remediation measures. Soil and pore water samples were taken along a transect with varying distance from the process water distribution ditch and analyzed for total and more easily mobile concentrations of contaminants (peat soil) as well as total and dissolved contaminants (water samples). Concentrations of contaminants such as arsenic, manganese or antimony in peat and pore water samples were highest near the distribution ditch and decreased with increasing distance from the

  11. Study of water recovery and solid waste processing for aerospace and domestic applications. Volume 2: Final report

    Science.gov (United States)

    Guarneri, C. A.; Reed, A.; Renman, R. E.

    1972-01-01

    The manner in which current and advanced technology can be applied to develop practical solutions to existing and emerging water supply and waste disposal problems is evaluated. An overview of water resource factors as they affect new community planning, and requirements imposed on residential waste treatment systems are presented. The results of equipment surveys contain information describing: commercially available devices and appliances designed to conserve water; devices and techniques for monitoring water quality and controlling back contamination; and advanced water and waste processing equipment. System concepts are developed and compared on the basis of current and projected costs. Economic evaluations are based on community populations of from 2,000 to 250,000. The most promising system concept is defined in sufficient depth to initiate detailed design.

  12. Degradation of industrial waste waters on Fe/C-fabrics. Optimization of the solution parameters during reactor operation.

    Science.gov (United States)

    Bozzi, A; Yuranova, T; Lais, P; Kiwi, J

    2005-04-01

    This study addresses the pre-treatment of toxic and recalcitrant compounds found in the waste waters arriving at a treating station for industrial effluents containing chlorinated aromatics and non-aromatic compounds, anilines, phenols, methyl-tert-butyl-ether (MTBE). By reducing the total organic carbon (TOC) of these waste waters the hydraulic load for the further bacterial processing in the secondary biological treatment is decreased. The TOC decrease and discoloration of the waste waters was observed only under light irradiation in the reactor by immobilized Fenton processes on Fe/C-fabrics but not in the dark. The energy of activation for the degradation of the waste waters was of 4.2 kcal/mol. The degradation of the waste waters was studied in the reactor as a function of (a) the amount of oxidant used (H2O2), (b) the recirculation rate, (c) the solution pH and (d) the applied temperature. With these parameters taken as input factors, statistical modeling allows one to estimate the most economic use of the oxidant and electrical energy to degrade these waste waters. The concentration of the most abundant organic pollutants during waste waters degradation was followed by gas chromatography/mass spectrometry (GC-MS). The ratio of the biological oxygen demand to the total organic carbon BOD5/TOC increased significantly due to the Fe/C-fabric catalyzed treatment from an initial value of 2.03 to 2.71 (2 h). The reactor results show that the recirculation rate has no influence on the TOC decrease of the treated waters but affects the BOD increase of these solutions.

  13. Phytoremediation of Polychlorobiphenyls PCBs in Landfill E-Waste Leachate with Water Hyacinth E.Crassipes

    Directory of Open Access Journals (Sweden)

    E.A Omondi

    2015-05-01

    Full Text Available Abstract The presence of e-waste in a landfill can release persistent organic pollutants POPs including polychlorinated biphenyls PCBs into the environment. PCBs are a family of more than 200 chemical compounds congeners each of which consists of two benzene rings and one to ten chlorine atoms. This study investigated use of water hyacinth Eichhornia crassipes for phytoremediation of landfill leachate waste containing PCB. Landfill leachate was simulated in the laboratory by spiking water samples with PCB to obtain concentrations of 5 10 and 15 amp956gL which were in one to two orders of magnitude above the US Environmental Protection Agency EPA limit of 0.5 amp956gL or 0.5 ppb. Water hyacinth plants were grown in 2 L samples of the PCB spiked water for 15 days and evaluated for tolerance and bioaccumulation of PCB. Phytoremediation of PCB spiked water by the plants was evaluated by measuring the change in concentration of PCB. The plants tolerated PCB concentrations in the range of 5 to 15 amp956gL without depicting any serious adverse effect except for change in root color and an initial wilting of peripheral leaves. Water hyacinth reduced the concentration of PCBs in the leachate over 15 days from 15 to 0.42 amp956gL for the 15 amp956gL initial concentration sample and to below the GCMS detection limit of 0.142 amp956gL for the 10 and 5 ugL initial concentration samples. Bioaccumulation of PCB in the plant tissue was evaluated through solid phase extraction and testing of samples for PCB with GCMS. Bioaccumulation of PCBs at a concentration of 0.179 amp956gg was observed in the water hyacinth roots for the 15 amp956gL sample but none was detected for the lower initial PCB concentration and shoots. The study demonstrated potential of water hyacinth plants in phytoremediation of PCBs in e-waste leachate.

  14. Nitrogenous Waste Handling by Larval Zebrafish Danio rerio in Alkaline Water.

    Science.gov (United States)

    Kumai, Yusuke; Harris, Jessica; Al-Rewashdy, Hasanen; Kwong, Raymond W M; Perry, Steve F

    2015-01-01

    Although adult fish excrete their nitrogenous waste primarily as ammonia, larval fish may excrete a higher proportion as urea, an evolutionary strategy that lessens nitrogenous waste toxicity during early development. Previous studies firmly established that ammonia excretion is inhibited in adult fish acutely exposed to alkaline water. This study was designed to test the hypothesis that total nitrogen excretion is maintained in larval zebrafish raised in alkaline water (pH ∼ 10.0) as a result of compensatory adjustments to urea and/or ammonia transport pathways. Raising zebrafish in alkaline water from 0 to 4 d postfertilization (dpf) reduced ammonia excretion at 4 dpf, whereas urea excretion was elevated by 141%. The increase in urea excretion at 4 dpf served to maintain total nitrogen excretion constant, despite the persistent inhibition of ammonia excretion. Whole body ammonia and urea contents were not significantly altered by exposure to alkaline water. Protein and mRNA expression of Rhcg1, an apically expressed ammonia-conducting channel, were significantly elevated after 4-d exposure to alkaline water, whereas the mRNA expression of Rhag, Rhbg, and urea transporter were unaffected. The acute exposure to alkaline water of 4-dpf larvae reared in control water caused a rapid inhibition of ammonia excretion that had partially recovered within 6 h of continued exposure. The partial recovery of ammonia excretion despite continued exposure to alkaline water suggested an increased ammonia excretion capacity. In agreement with an increased capacity to excrete ammonia, the transfer of larvae back to the control (normal pH) water was accompanied by increased rates of ammonia excretion. Urea excretion was not stimulated during 6-h exposure to alkaline water. Following both chronic and acute exposure to alkaline water, the rate of uptake of methylamine (an ammonia analog) was significantly elevated, consistent with increased protein expression of the apical ammonia

  15. Reduction of Waste Water in Erhai Lake Based on MIKE21 Hydrodynamic and Water Quality Model

    Directory of Open Access Journals (Sweden)

    Changjun Zhu

    2013-01-01

    Full Text Available In order to study the ecological water environment in Erhai Lake, different monitoring sections were set to research the change of hydrodynamics and water quality. According to the measured data, MIKE21 Ecolab, the water quality simulation software developed by DHI, is applied to simulate the water quality in Erhai Lake. The hydrodynamics model coupled with water quality is established by MIKE21FM software to simulate the current situation of Erhai Lake. Then through the comparison with the monitoring data, the model parameters are calibrated and the simulation results are verified. Based on this, water quality is simulated by the two-dimensional hydrodynamics and water quality coupled model. The results indicate that the level of water quality in the north and south of lake is level III, while in the center of lake, the water quality is level II. Finally, the water environment capacity and total emmision reduction of pollutants are filtered to give some guidance for the water resources management and effective utilization in the Erhai Lake.

  16. Solar-assisted MED treatment of Eskom power station waste water

    Science.gov (United States)

    Roos, Thomas H.; Rogers, David E. C.; Gericke, Gerhard

    2017-06-01

    The comparative benefits of multi-effect distillation (MED) used in conjunction with Nano Filtration (NF), Reverse Osmosis (RO) and Eutectic Freeze Crystallization (EFC) are determined for waste water minimization for inland coal fired power stations for Zero Liquid Effluent Discharge (ZLED). A sequence of technologies is proposed to achieve maximal water recovery and brine concentration: NF - physico-chemical treatment - MED - EFC. The possibility of extending the concentration of RO reject arising from minewater treatment at the Lethabo power station with MED alone is evaluated with mineral formation modelling using the thermochemical modelling software Phreeq-C. It is shown that pretreatment is essential to extend the amount of water that can be recovered, and this can be beneficially supported by NF.

  17. Optimising conventional treatment of domestic waste water: quality, required surface area, solid waste minimisation and biogas production for medium and small-scale applications

    CSIR Research Space (South Africa)

    Szewczuk, S

    2010-09-01

    Full Text Available .kashan.co.za] Optimising conventional treatment of domestic waste water: quality, required surface area, solid waste minimisation and biogas production for medium and small-scale applications S SZEWCZUK, SP ROUX, M LINDEQUE, J GERMANIS CSIR, PO Box 395, Pretoria, 0001...) and the methane-rich gas yield is used for heating the Ad reactor itself. Increased efficiency due to technological progress can increase the gas yield, reduce the reactor dependency on biogas for heating and allow more efficient use of the biogas...

  18. Use of textile waste water along with liquid NPK fertilizer for production of wheat on saline sodic soils.

    Science.gov (United States)

    Yaseen, Muhammad; Aziz, Muhammad Zahir; Jafar, Abdul Aleem; Naveed, Muhammad; Saleem, Muhammad

    2016-01-01

    A field experiment in collaboration with a private textile industry (Noor Fatima Fabrics Private (Ltd.), Faisalabad) was conducted to evaluate the effect of disposed water from bleaching unit, printing unit and end drain for improving growth and yield of wheat under saline sodic soil. Textile waste water along with canal water (control) was applied with and without liquid NPK fertilizer. The application of liquid NPK fertilizer with end drain waste water increased plant height, spike length, flag leaf length, root length, number of tillers (m(-2)), number of fertile tillers (m(-2)), 1000 grain weight, grain yield, straw yield and biological yield up to 21, 20, 20, 44, 17, 20, 14, 44, 40 and 41%, respectively compared to canal water (control). Similarly, the NPK uptake in grain was increased up to 15, 30 and 28%, respectively by liquid fertilizer treated end drain water as compare to canal water with liquid fertilizer. Moreover, concentration of different heavy metals particularly Cu, Cr, Pb and Cd was decreased in grains by application of waste water along with liquid NPK. The result may imply that waste water application along with liquid-NPK could be a novel approach for improving growth and yield of wheat in saline sodic soils.

  19. Arsenic waste management: a critical review of testing and disposal of arsenic-bearing solid wastes generated during arsenic removal from drinking water.

    Science.gov (United States)

    Clancy, Tara M; Hayes, Kim F; Raskin, Lutgarde

    2013-10-01

    Water treatment technologies for arsenic removal from groundwater have been extensively studied due to widespread arsenic contamination of drinking water sources. Central to the successful application of arsenic water treatment systems is the consideration of appropriate disposal methods for arsenic-bearing wastes generated during treatment. However, specific recommendations for arsenic waste disposal are often lacking or mentioned as an area for future research and the proper disposal and stabilization of arsenic-bearing waste remains a barrier to the successful implementation of arsenic removal technologies. This review summarizes current disposal options for arsenic-bearing wastes, including landfilling, stabilization, cow dung mixing, passive aeration, pond disposal, and soil disposal. The findings from studies that simulate these disposal conditions are included and compared to results from shorter, regulatory tests. In many instances, short-term leaching tests do not adequately address the range of conditions encountered in disposal environments. Future research directions are highlighted and include establishing regulatory test conditions that align with actual disposal conditions and evaluating nonlandfill disposal options for developing countries.

  20. Annual water quality data report for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lyon, M.L. (International Technology Corp., Torrance, CA (USA))

    1989-04-01

    This is the fourth Annual Water Quality Data Report for the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico. The WIPP project is operated by the United States Department of Energy (DOE) for the purpose of providing a research and development facility to demonstrate the safe disposal of transuranic radioactive wastes generated by the defense activities of the United States Government. This report presents water quality data collected from January 1988 through December 1988 from 16 designated pre-operational (WIPP facility) monitoring wells, two additional wells, and 10 privately-owned wells in the vicinity of the WIPP. Additionally, water samples were collected from the Air Intake Shaft during shaft construction activities at the WIPP. This report lists pertinent information regarding the monitoring wells sampled, sampling zone, dates pumped, and types of samples collected during 1988. Comparative data from previous samplings of all wells can be found in Uhland and Randall (1986), Uhland et al. (1987), Randall et al. (1988), as well as in this report. The data reported by the Water Quality Sampling Program in this and previous reports indicate that serial sampling is a very useful tool in determining sample representativeness from wells in the WIPP vicinity. Serial sample field chemistry data are demonstrated to be highly accurate and precise as indicated by the excellent overall average percent spike recovery values and low RPD values reported for the sampling events. Serial sample field chemistry data and laboratory water quality parameter analyses gathered by the WQSP since January 1985 are the foundation for a pre-operational water quality baseline at the WIPP. 32 refs., 66 figs., 96 tabs.

  1. Degradation of EDTA and novel complexing agents in pulp and paper mill process and waste waters by Fenton's reagent.

    Science.gov (United States)

    Pirkanniemi, Kari; Metsärinne, Sirpa; Sillanpää, Mika

    2007-08-17

    Fenton's process was used in oxidative degradation of ethylediaminetetraacetic acid (EDTA) and novel complexing agents, namely BCA5 and BCA6, in distilled water and spiked samples of integrated pulp and paper mill waste water and ECF-pulp bleaching effluent. In waste water, over 90% of EDTA was degraded within 3 min when temperature was 60 degrees C, pH 4, and molecular ratio of H2O2:Fe2+:EDTA was 70:2:1 (0.26 mM EDTA) or higher. In spiked ECF bleaching effluent up to 42% of EDTA was degraded in similar reaction conditions, still higher than published results indicate biological waste water treatment of pulp and paper mill waste water being capable of. In pH 3, EDTA proved readily degradable by Fenton's process in otherwise similar conditions. According to these results, Fenton's process could be used as a pre-treatment method for EDTA-containing bleaching effluents prior to the biological waste water treatment. In addition, BCA5 and BCA6 proved their superiority in terms of degradability also by Fenton's process in both pH 3 and 4.

  2. Immobilization of zinc from metallurgical waste and water solutions using geopolymerization technology

    Directory of Open Access Journals (Sweden)

    Nikolići I.

    2014-07-01

    Full Text Available Geopolymeraization technology is recognized as a promising method for immobilization of heavy metals by the stabilization or solidification process. This process involves the chemical reaction of alumino-silicate oxides with highly alkaline activator yielding the new material with amorphous or semi-amorphous structure, called geopolymer. Fly ash and blast furnace slag were mainly used as a raw material for geopolymerization process. In this paper we have investigated the possibility of immobilization of Zn from electric arc furnace dust (EAFD through geopolymerization of fly ash and possibility of Zn2+ adsorption from waste waters using fly ash based geopolymers. Efficacy of Zn immobilization from electric arc furnace dust was evaluated by TCLP test while the immobilization of Zn2+ ions from the water solution was evaluated through the removal efficiency. The results have shown that geopolymerization process may successfully be used for immobilization of Zn by stabilization of EAFD and for production of low cost adsorbent for waste water treatment.

  3. Methane gas generation from waste water extraction process of crude palm oil in experimental digesters

    Science.gov (United States)

    Dillon, A.; Penafiel, R.; Garzón, P. V.; Ochoa, V.

    2015-12-01

    Industrial processes to extract crude palm oil, generates large amounts of waste water. High concentrations of COD, ST, SV, NH4 + and low solubility of O2, make the treatment of these effluents starts with anaerobic processes. The anaerobic digestion process has several advantages over aerobic degradation: lower operating costs (not aeration), low sludge production, methane gas generation. The 4 stages of anaerobic digestion are: hydrolysis, acidogenic, acetogenesis and methanogenesis. Through the action of enzymes synthesized by microbial consortia are met. The products of each step to serve as reagents is conducted as follows. The organic load times and cell hydraulic retention, solids content, nutrient availability, pH and temperature are factors that influence directly in biodigesters. The objectives of this presentation is to; characterize the microbial inoculum and water (from palm oil wasted water) to be used in biodigestores, make specific methanogenic activity in bioassays, acclimatize the microorganisms to produce methane gas using basal mineral medium with acetate for the input power, and to determine the production of methane gas digesters high organic load.

  4. UTILIZATION OF AGARWOOD DISTILLATION WASTE IN OILWELL CEMENT AND ITS EFFECT ON FREE WATER AND POROSITY

    Directory of Open Access Journals (Sweden)

    Arina Sauki

    2013-10-01

    Full Text Available The intent of this research is to utilize the waste produced by distillation process of Agarwood oil and convert it into a profitable oilwell cement additive. Common problem during oilwell cementing is free wáter separation. This problem could weaken cement at the top, gas migration problem and non uniform density of cement slurry that are even worst in cementing deviated well. Another concern on cementing design is the porosity of the hardened cement. If the cement is too porous, it can lead to gas migration and casing corrosion. All tests were conducted according to API Specification-10B. Free water test was determined at different concentrations of Agarwood Waste Additive (AWA, different inclination angles and different temperatures. Based on the findings, it was observed that zero free water was produced when 2% BWOC of AWA was used at all angles. The findings also revealed that AWA can maintain good thermal stability as it could maintain zero free water at increased temperature up to 60˚C.  The porosity of AWA cement was comparable with standard API neat cement as the porosity did not differ much at 2% BWOC of AWA. Therefore, it can be concluded that the AWA is suitable to  be used as an additive in oil well cement (OWC  with 2% BWOC is taken as the optimum concentration.

  5. Isolation and Screening of Water Microbes for Decolourisation of Textile Dye Waste

    Directory of Open Access Journals (Sweden)

    J. K. Singh,

    2016-04-01

    Full Text Available Azo dyes are widely used in textile industry. Unused dyes, consisting mainly non biodegradable released along with waste water streams without any proper pre-treatment which cause nuisance for environment and accumulate in flora as well as fauna. These also exhibit allergic, carcinogenic and mutagenic properties for human beings. Isolation and screening of azo dye degrading bacteria are economic in biodegradation and detoxification. In the present study, 200 waste water samples were collected from dye-contaminated sites of textile industries and bacterial species such as Bacillus subtilis, Pseudomonas aeruginosa and Psuedomonas putida were isolated and identified. Evaluation of decolorizing properties of these bacteriae were done by UV-Vis spectroscopy (Amax 596 nm in different concentrations using different carbon sources such as Hans’s medium and GYP medium. Maximum decolourisation of 0.1% azo dyes were recorded to be 89.0%, 91% and 86% in Hans medium containing charcoal source by Bacillus subtilis, Pseudomonas aeruginosa and Psuedomonas putida respectively at 24 hrs. These bacterial isolates may be utilized in large scale for pre-treatment for ecological balance by avoiding water pollution.

  6. Flocculating performance of a bioflocculant produced by Arthrobacter humicola in sewage waste water treatment.

    Science.gov (United States)

    Agunbiade, Mayowa Oladele; Van Heerden, Esta; Pohl, Carolina H; Ashafa, Anofi Tom

    2017-06-12

    The discharge of poorly treated effluents into the environment has far reaching, consequential impacts on human and aquatic life forms. Thus, we evaluated the flocculating efficiency of our test bioflocculant and we report for the first time the ability of the biopolymeric flocculant produced by Arthrobacter humicola in the treatment of sewage wastewater. This strain was isolated from sediment soil sample at Sterkfontein dam in the Eastern Free State province of South Africa. Basic Local Alignment Search Tool (BLAST) analysis of the nucleotide sequence of the 16S rDNA revealed the bacteria to have 99% similarity to Arthrobacter humicola strain R1 and the sequence was deposited in the Gene bank as Arthrobacter humicola with accession number KC816574.1. Flocculating activity was enhanced with the aid of divalent cations, pH 12, at a dosage concentration of 0.8 mg/mL. The purified bioflocculant was heat stable and could retain more than 78% of its flocculating activity after heating at 100 °C for 25 min. Fourier Transform Infrared Spectroscopy analysis demonstrated the presence of hydroxyl and carboxyl moieties as the functional groups. The thermogravimetric analysis was used to monitor the pyrolysis profile of the purified bioflocculant and elemental composition revealed C: O: Na: P: K with 13.90: 41.96: 26.79: 16.61: 0.74 weight percentage respectively. The purified bioflocculant was able to remove chemical oxygen demand, biological oxygen demand, suspended solids, nitrate and turbidity from sewage waste water at efficiencies of 65.7%, 63.5%, 55.7%, 71.4% and 81.3% respectively. The results of this study indicate the possibility of using the bioflocculant produced by Arthrobacter humicola as a potential alternative to synthesized chemical flocculants in sewage waste water treatment and other industrial waste water.

  7. Energy recovery from waste glycerol by utilizing thermal water vapor plasma.

    Science.gov (United States)

    Tamošiūnas, Andrius; Valatkevičius, Pranas; Gimžauskaitė, Dovilė; Jeguirim, Mejdi; Mėčius, Vladas; Aikas, Mindaugas

    2017-04-01

    Glycerol, considered as a waste feedstock resulting from biodiesel production, has received much attention in recent years due to its properties, which offer to recover energy. The aim of this study was to investigate the use of a thermal water vapor plasma for waste (crude) glycerol conversion to synthesis gas, or syngas (H2 + CO). In parallel of crude glycerol, a pure glycerol (99.5%) was used as a reference material in order to compare the concentrations of the formed product gas. A direct current (DC) arc plasma torch stabilized by a mixture of argon/water vapor was utilized for the effective glycerol conversion to hydrogen-rich synthesis gas. It was found that after waste glycerol treatment, the main reaction products were gases with corresponding concentrations of H2 50.7%, CO 23.53%, CO2 11.45%, and CH4 3.82%, and traces of C2H2 and C2H6, which concentrations were below 0.5%. The comparable concentrations of the formed gas products were obtained after pure glycerol conversion-H2 46.4%, CO 26.25%, CO2 11.3%, and CH4 4.7%. The use of thermal water vapor plasma producing synthesis gas is an effective method to recover energy from both crude and pure glycerol. The performance of the glycerol conversion system was defined in terms of the produced gas yield, the carbon conversion efficiency, the cold gas efficiency, and the specific energy requirements.

  8. Bio-Refineries Bioprocess Technologies for Waste-Water Treatment, Energy and Product Valorization

    Science.gov (United States)

    Keith Cowan, A.

    2010-04-01

    Increasing pressure is being exerted on communities and nations to source energy from forms other than fossil fuels. Also, potable water is becoming a scarce resource in many parts of the world, and there remains a large divide in the demand and utilization of plant products derived from genetically modified organisms (GMOs) and non-GMOs. The most extensive user and manager of terrestrial ecosystems is agriculture which is also the de facto steward of natural resources. As stated by Miller (2008) no other industry or institution comes close to the comparative advantage held for this vital responsibility while simultaneously providing food, fiber, and other biology-based products, including energy. Since modern commercial agriculture is transitioning from the production of bulk commodities to the provision of standardized products and specific-attribute raw materials for differentiated markets, we can argue that processes such as mass cultivation of microalgae and the concept of bio-refineries be seen as part of a `new' agronomy. EBRU is currently exploring the integration of bioprocess technologies using microalgae as biocatalysts to achieve waste-water treatment, water polishing and endocrine disruptor (EDC) removal, sustainable energy production, and exploitation of the resultant biomass in agriculture as foliar fertilizer and seed coatings, and for commercial extraction of bulk commodities such as bio-oils and lecithin. This presentation will address efforts to establish a fully operational solar-driven microalgae bio-refinery for use not only in waste remediation but to transform waste and biomass to energy, fuels, and other useful materials (valorisation), with particular focus on environmental quality and sustainability goals.

  9. Biotechnological potential of Bacillus salmalaya 139SI: a novel strain for remediating water polluted with crude oil waste.

    Directory of Open Access Journals (Sweden)

    Salmah Ismail

    Full Text Available Environmental contamination by petroleum hydrocarbons, mainly crude oil waste from refineries, is becoming prevalent worldwide. This study investigates the bioremediation of water contaminated with crude oil waste. Bacillus salamalaya 139SI, a bacterium isolated from a private farm soil in the Kuala Selangor in Malaysia, was found to be a potential degrader of crude oil waste. When a microbial population of 108 CFU ml-1 was used, the 139SI strain degraded 79% and 88% of the total petroleum hydrocarbons after 42 days of incubation in mineral salt media containing 2% and 1% of crude oil waste, respectively, under optimum conditions. In the uninoculated medium containing 1% crude oil waste, 6% was degraded. Relative to the control, the degradation was significantly greater when a bacteria count of 99 × 108 CFU ml-1 was added to the treatments polluted with 1% oil. Thus, this isolated strain is useful for enhancing the biotreatment of oil in wastewater.

  10. Analysis and occurrence of seven artificial sweeteners in German waste water and surface water and in soil aquifer treatment (SAT).

    Science.gov (United States)

    Scheurer, Marco; Brauch, Heinz-J; Lange, Frank T

    2009-07-01

    A method for the simultaneous determination of seven commonly used artificial sweeteners in water is presented. The analytes were extracted by solid phase extraction using Bakerbond SDB 1 cartridges at pH 3 and analyzed by liquid chromatography electrospray ionization tandem mass spectrometry in negative ionization mode. Ionization was enhanced by post-column addition of the alkaline modifier Tris(hydroxymethyl)amino methane. Except for aspartame and neohesperidin dihydrochalcone, recoveries were higher than 75% in potable water with comparable results for surface water. Matrix effects due to reduced extraction yields in undiluted waste water were negligible for aspartame and neotame but considerable for the other compounds. The widespread distribution of acesulfame, saccharin, cyclamate, and sucralose in the aquatic environment could be proven. Concentrations in two influents of German sewage treatment plants (STPs) were up to 190 microg/L for cyclamate, about 40 microg/L for acesulfame and saccharin, and less than 1 microg/L for sucralose. Removal in the STPs was limited for acesulfame and sucralose and >94% for saccharin and cyclamate. The persistence of some artificial sweeteners during soil aquifer treatment was demonstrated and confirmed their environmental relevance. The use of sucralose and acesulfame as tracers for anthropogenic contamination is conceivable. In German surface waters, acesulfame was the predominant artificial sweetener with concentrations exceeding 2 microg/L. Other sweeteners were detected up to several hundred nanograms per liter in the order saccharin approximately cyclamate > sucralose.

  11. Full scale treatment of phenolic coke coking waste water under unsteady conditions

    Energy Technology Data Exchange (ETDEWEB)

    Suschka, Jan [Institute for Ecology of Industrial Areas, Katowice (Poland); Morel, Jacek; Mierzwinski, Stanislaw; Januszek, Ryszard [Coke Plant Przyjazn, Dabrowa Gornicza (Poland)

    1993-12-31

    Phenolic waste water from the largest coke coking plant in Poland is treated at a full technical scale. From the very beginning it became evident that very high qualitative variations in short and long periods were to be expected. For this purpose, the biological treatment plant based on activated sludge is protected through preliminary physical-chemical treatment and the results are secured by a final chemical stage of treatment. Nevertheless, improvements in the performance of the treatment plant have been found necessary to introduce. In this work, the experience gained over the last five years is described and developed improvements were presented. 3 refs., 9 figs., 1 tab.

  12. New Methodology in Life Cycle Impact Assessment (LCIA) of waste water treatment

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Wenzel, Henrik; Hauschild, Michael

    chose among different waste water treatments? Which ones are most beneficial in a holistic perspective? Here, the life cycle assessment (LCA) approach as a decision supporting tool may help because its goal is to allow quantification and direct comparison of characteristics as diverse as energy...... EU research project "NEPTUNE" focusing on nutrient recycling, micro-pollutants and ecotoxicity removal, energy production, and reuse of sludge and of its resources, this paper will present the first results of the development of a new methodology for assessing advances in wastewater treatment...

  13. Polyphenol removal from olive mill waste waters by selected mould strains

    Directory of Open Access Journals (Sweden)

    El-Yachioui, M.

    2000-12-01

    Full Text Available Mould strains were isolated from Olive Mill Waste (OMW waters, characterized and screened for their activities on polyphenols hydrolysis by reculturing on the olive mill waste waters itself. The selected strains were then used for polyphenols removal in pure culture assays in flasks. Prior to the inoculation, OMW water was diluted to prepare three initial concentrations of polyphenols (2.2 g/L; 4.5g/L; 14.5g/L. Chemical characteristics including polyphenols and Chemical Oxygen Demand (COD were followed up in these assays. Results showed that the polyphenols removal by some strains was estimated to around 95.14% and the COD was also decreased by 43%. Olive mill waste waters are normally colored in dark because of the polyphenols oxidation. The microbial strains by hydrolysing the polyphenols had decolored completely these effluents and a clear liquid was obtained afier 12-15 days of treatment under aerobic shaking in laboratory. Polyphenols may have some inhibitory effect which would cause problems to the biological treatment of these effluents. Their removal would facilitate the treatment of the waste.Cepas de moho fueron aisladas del alpechín (OMW, caracterizadas y analizadas para determinar sus actividades en la hidrólisis de polifenoles mediante su recultivo en el mismo alpechín. Las cepas seleccionadas se usaron posteriormente para la eliminación de polifenoles en ensayos de cultivos puros en matraces. Antes de la inoculación, el alpechín fue diluido para obtener tres concentraciones iniciales de polifenoles (2,2g/L; 4,5g/L; 14,5g/L. Las características químicas, incluyendo polifenoles y la demanda química de oxígeno (DQO, fueron analizadas en estos ensayos. Los resultados muestran que los polifenoles eliminados por algunas cepas fueron del 95.14% y la DQO disminuyó un 43%. El alpechín es normalmente oscuro por la oxidación de los polifenoles. Las cepas microbianas al hidrolizar los polifenoles decoloraron completamente estos

  14. Waste Water Treatment after Removal of Thermic Oxides from Stainless Steel Welding Joints

    OpenAIRE

    2010-01-01

    This work describes chemical methods of removal of thermic oxides from stainless steel welding joints, as well as waste water treatment. Thermal oxides were removed from the stainless steel surface using chemical and electrochemical procedures. A pickling paste that contains HNO3 and HF in different ratios was used for chemical cleansing of thermal oxides (A, B, and C). Electrochemical removal was done using an apparatus Magic Cleaner, and as electrolyte a solution H2SO4+H3PO4 was used. Conce...

  15. Removal of Pb ion from water samples using red mud (bauxite ore processing waste)

    OpenAIRE

    Ghorbani A.; Nazarfakhari M.; Pourasad Y.; Mesgari Abbasi S.

    2014-01-01

    This work presented the use of red mud (bauxite ore processing waste) in removal of lead ions in water samples. For this 0.1 g of red mud has been used as adsorbent which suspended in 10 ml of lead solution with the concentration of 50 mg l-1 for about 1 h. After that the lead concentration in the samples taken from the red mud treated lead solution measured with atomic absorption spectroscopy (AAS). The effect of some parameter which is important in adsorption of lead on red mud such as suit...

  16. Peat moss for waste water treatment. Open file report No. 93-3

    Energy Technology Data Exchange (ETDEWEB)

    Daigle, J.Y.

    1993-01-01

    Domestic waste waters contain high levels of bacteria and contaminants. In rural areas, the standard method of controlling these pollutants is by using septic fields. Where site conditions do not allow the construction of a standard septic field, a peat biofilter can be used. Peat biofilters were installed on three sites and monitored over a period of twelve months. The experimental sites are described, and system performance including fecal coliforms, biological oxygen demand, nitrogen, suspended solids, hydraulic load, and cost of construction, are detailed.

  17. Standard test method for uranium analysis in natural and waste water by X-ray fluorescence

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 This test method applies for the determination of trace uranium content in waste water. It covers concentrations of U between 0.05 mg/L and 2 mg/L. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  18. Evaluation of coastal waters receiving fish processing waste: Lota Bay as a case study.

    Science.gov (United States)

    Ahumada, Ramón; Rudolph, Anny; Contreras, Sergio

    2004-01-01

    Liquid wastes from the fish meal and oil processing industries produce serious environmental impacts in coastal embayments on the coasts of Chile and Peru. This article presents an analysis of an environmental monitoring program at Lota Bay, a shallow coastal indentation in central Chile (37 degrees S) exposed to industrial fishing activity. The study of the environmental impact produced by waste effluents permitted making an evaluation of the bay's capacity for seasonal recovery from this impact. Seasonal cruises were carried out during 1994 and in 1996, 1997, and 1998. Variables analyzed included salinity, temperature, dissolved oxygen, ammonium concentration and surface oil and grease. The hydrographic regime of Lota Bay follows a seasonal pattern, where, typical of most SE pacific embayments, waters from subsuperficial oxygen minimum zones moved into the bay. The percentages of dissolved oxygen were critical in the area of organic waste discharge. The impact of wastewater is related to the type and status of the fishery, including: (i) overloads of plant production lines, (ii) maintenance and cleaning of installations, and (iii) degree of shipboard fishing conservation. Major alterations were observed in summer, when the highest discharge of organic load occurred. In winter, an improvement in the re-aeration conditions reduced the impact. Remedial measures implemented beginning in 1997 arose from the monitoring program and had to be separated into two recovery factors including (a) internal management of plants and (b) treatment of plant effluents.

  19. Numerical simulations of water flow and contaminants transport near mining wastes disposed in a fractured rock mass

    Institute of Scientific and Technical Information of China (English)

    Ben Abdelghani Farouk; Aubertin Michel; Simon Richard; Therrien René

    2015-01-01

    A numerical tool, called Hydro-Geosphere, was used to simulate unsaturated water flow and contami-nants migration around an open pit filled with mining wastes. Numerical simulations had been carried out to assess the influence of various factors on water flow and solute transport in and around the surface openings including recharge, properties of the waste material and presence of fractures in the surround-ing rock mass. The effect of the regional hydraulic gradient was also investigated. The analyses were con-ducted by simulating various 2D cases using experimentally obtained material properties and controlled boundary conditions. The effects of the hydrogeological properties of the filling material (i.e., water reten-tion curve and hydraulic conductivity function), fracture network characteristics and conductivity of the joints were assessed. The results illustrate that fractures control water flow and contaminants transport around the waste disposal area. A fracture network can desaturate the system and improve the regional gradient effect.

  20. 利用相变材料回收高炉冲渣水余热的经济性分析%Economic Analysis of Using Phase Change Material Recovery Waste Heat from Waste Water of Blast Furnace Slag

    Institute of Scientific and Technical Information of China (English)

    肖松; 郑东升; 吴淑英

    2012-01-01

    According to the features of the waste water, the economic analysis of using phase change material recovery waste heat from waste water of blast furnace slag was studied.%根据高炉冲渣水余热的特点,对利用相变材料回收高炉冲渣水余热的经济性进行了分析.

  1. Removal heavy metals and sulphate from waste waters by sulphate-reducing bacteria

    Directory of Open Access Journals (Sweden)

    Kušnierová Mária

    2000-09-01

    Full Text Available This article is devoted to the process of bacterial sulphate reduction, which is used to removal of heavy metals and sulphate ions from waste waters.The life of animals and plants depends on the existence of microscopic organisms – microorganisms (MO, which play an important role in cycle changes of biogenic elements on the earth. The sulphur cycle in the nature is considered as one of the oldest and most significant biological systems (Fig. 1. The sulphate-reducing bacteria (SRB miss the assimilatory part of the cycle and produce sulphides. The microbial population of this dissimilatory part is called “sulfuretum”. The SRB can be found in anaerobic mud and sediments of freshwater, thermal or non-thermal sulphur springs, mining waters from sulphide deposits, oil deposits, sea and ocean beds, and in the gastrointestinal tract of man and animals. The SRB represent a group of chemoorganotrophic, strictly anaerobic and gramnegative bacteria, which exhibit a great morphological and physiological diversity. Despite of their considerable morphological variety, they have one property in common, which is the ability to utilise preferentially sulphates (occasionally sulphites, thiosulphates, tetrathionates as electron acceptors, which are reduced to sulphides, during anaerobic respiration. The electron donors in these processes are simple organic compounds as lactate, malate, etc.,(heterotrophically reduction or gaseous hydrogen (autotrophically reduction. SRB can produce a considerable amount of hydrogen sulphide, which reacts easily in aqueous solution with the cations of heavy metals, forming metal sulphides that have low solubility. The bacterial sulphate reduction can be used for the treatment of acid mine drainage waters, which is considered to be the major problem associated with mining activities.In order to remove heavy metals from waste waters, e.g., from galvanizing plants, mine waters (Smolnik, Šobov locality and metallurgic plants (works

  2. Studies on impact of release of liquid industrial waste from soda ash industry in the nearshore water of north Gujarat

    Digital Repository Service at National Institute of Oceanography (India)

    Zingde, M.D.

    ). The impacts of these wastes on the water and sediment quality of the receiving waters are discussed. Due to the density inhibited mixing the effluents tend to spread into a kilometre long milky white patch with high levels of pH, suspended solids and ammonia...

  3. Artificial sweeteners as waste water markers in a shallow unconfined aquifer

    Science.gov (United States)

    Bichler, Andrea; Muellegger, Christian; Hofmann, Thilo

    2013-04-01

    One key factor in groundwater quality management is the knowledge of flow paths and recharge. In coupled ground- and surface water systems the understanding of infiltration processes is therefore of paramount importance. Recent studies show that artificial sweeteners - which are used as sugar substitutes in food and beverages - are suitable tracers for domestic wastewater in the aquatic environment. As most rivers receive sewage discharges, artificial sweeteners might be used for tracking surface waters in groundwater. In this study artificial sweeteners are used in combination with conventional tracers (inert anions Cl-, SO42-, stable water isotopes δ18O, δ2H) to identify river water infiltration and the influence of waste water on a shallow unconfined aquifer used for drinking water production. The investigation area is situated in a mesoscale alpine head water catchment. The alluvial aquifer consists of quaternary gravel deposits and is characterized by high hydraulic permeability (kfmax 5 x 10-2 ms-1), high flow velocities (vmax 250 md-1) and a considerable productivity (2,5 m3s-1). A losing stream follows the aquifer in close proximity and is susceptible to infiltrate substantial volumes of water into the alluvial sediments. Water sampling campaigns in March and July 2012 confirmed the occurrence of artificial sweeteners (Acesulfam ACE, Sucralose SUC, Saccharin SAC and Cyclamat CYC) at the investigated site. The local sewage treatment plant was identified as point source of artificial sweeteners in the river water, with ACE concentrations up to 0,6 μgL-1. ACE concentrations in groundwater where approximately of one order of magnitude lower: ACE was present in 33 out of 40 sampled groundwater wells with concentrations up to 0,07 μgL-1, thus indicating considerable influence of sewage water loaded surface water throughout the aquifer. Elevated concentrations of ACE and SAC in single observation wells denote other sources of locally limited contamination

  4. Complex use of waste in wastewater and circulating water treatment from oil in heat power stations

    Science.gov (United States)

    Nikolaeva, L. A.; Iskhakova, R. Ya.

    2017-06-01

    Sewage and circulating water from oil of thermal power plants (TPP) generated in fuel-oil shops during washing of electrical equipment and its running into the storm drainage system from the industrial site has been considered in the paper. It has been suggested to use the carbonate sludge of water treatment modified with hydrophobing emulsion as a sorption material for waste and circulating water treatment in thermal power plants. The carbonate sludge is waste accumulated in clarifiers at the stage of natural water pretreatment. General technical characteristics of the sludge, such as moisture, bulk density, total pore volume, ash, etc., have been determined. It has been found that the sludge without additional treatment is a hydrophilic material that has low adsorption capacity and wettability with nonpolar compounds. Therefore, the sludge is treated with organosilicon compounds to reduce the moisture capacity and increase its floatation. Several types of sorption materials based on the carbonate sludge subjected to surface and volume hydrophobization have been developed. During the volume treatment, the hydrophobing compound has been introduced into the material along with the plastifier. In case of the surface treatment, heat-treated granules have been soaked into hydrophobing emulsion. It has been shown that surface hydrophobization is most economically advantageous, because it reduces the consumption of water-repelling agent, wherein the total pore volume and sorption capacity during surface hydrophobization increase by 45 and 25% compared to that during volume hydrophobization. Based on the obtained results, the most effective sorption material has been chosen. To produce this material, it is necessary to sequentially carry out mixing of carbonate sludge with the binder, granulation, calcination, impregnation with a waterrepellent emulsion, and drying of the finished material. The suggested technology to produce the material and use it as a sorbent allows

  5. Fuzzy logic based risk assessment of effluents from waste-water treatment plants.

    Science.gov (United States)

    Cabanillas, Julián; Ginebreda, Antoni; Guillén, Daniel; Martínez, Elena; Barceló, Damià; Moragas, Lucas; Robusté, Jordi; Darbra, Rosa Ma

    2012-11-15

    This paper presents a new methodology to assess the risk of water effluents from waste-water treatment plants (WWTPs) based on fuzzy logic, a well-known theory to deal with uncertainty, especially in the environmental field where data are often lacking. The method has been tested using the effluent's pollution data coming from 22 waste-water treatment plants (WWTPs) located in Catalonia (NE Spain). Thirty-eight pollutants were analyzed along three campaigns performed yearly from 2008 to 2010. Whereas 9 compounds have been detected in more than 70% of the samples analyzed, 7 compounds have been found at levels equal or higher than the river Environmental Quality Standards set by the Water Framework Directive. Upon combination of both criteria (presence and concentration), compounds of greatest environmental concern in the WWTP studied are nickel, the herbicide diuron, and the endocrine disruptors nonyl and octylphenol. It is remarkable the low variability of the pollutant concentration just differing for the case of nickel and zinc. These low values of exposure together with other pollutants' characteristics provide a medium or low risk assessment for all the WWTPs. The results of this new method have been compared with COMMPS procedure, a solid method developed in the context of the Water Framework Directive, and they show that the fuzzy model is more conservative than COMMPS. This is due to different reasons: the fuzzy model takes into account the persistence of chemical compounds whereas COMMPS does not; the fuzzy model includes the weights provided by an expert group inquired in previous works and also considers the uncertainty of the environmental data, avoiding the crisp values and offering a range of overlapping between the different fuzzy sets. However, the results even if being more conservative with fuzzy logic, are in good agreement with a solid methodology such as the COMMPS procedure.

  6. Natural radionuclides in waste water discharged from coal-fired power plants in Serbia.

    Science.gov (United States)

    Janković, Marija M; Todorović, Dragana J; Sarap, Nataša B; Krneta Nikolić, Jelena D; Rajačić, Milica M; Pantelić, Gordana K

    2016-12-01

    Investigation of the natural radioactivity levels in water around power plants, as well as in plants, coal, ash, slag and soil, and to assess the associated radiation hazard is becoming an emerging and interesting topic. This paper is focused on the results of the radioactivity analysis in waste water samples from five coal-fired power plants in Serbia (Nikola Tesla A, Nikola Tesla B, Kolubara, Morava and Kostolac), which were analyzed in the period 2003-2015. River water samples taken upstream and downstream from the power plants, drain water and overflow water were analyzed. In the water samples gamma spectrometry analysis was performed as well as determination of gross alpha and beta activity. Natural radionuclide (40)K was detected by gamma spectrometry, while the concentrations of other radionuclides, (226)Ra, (235)U and (238)U, usually were below the minimum detection activity (MDA). (232)Th and artificial radionuclide (137)Cs were not detected in these samples. Gross alpha and beta activities were determined by the α/β low level proportional counter Thermo Eberline FHT 770 T. In the analyzed samples, gross alpha activity ranged from MDA to 0.47 Bq L(-)(1), while the gross beta activity ranged from MDA to 1.55 Bq L(-)(1).

  7. Alternative Processes for Water Reclamation and Solid Waste Processing in a Physical/chemical Bioregenerative Life Support System

    Science.gov (United States)

    Rogers, Tom D.

    1990-01-01

    Viewgraphs on alternative processes for water reclamation and solid waste processing in a physical/chemical-bioregenerative life support system are presented. The main objective is to focus attention on emerging influences of secondary factors (i.e., waste composition, type and level of chemical contaminants, and effects of microorganisms, primarily bacteria) and to constructively address these issues by discussing approaches which attack them in a direct manner.

  8. Waste management of tar water from pyrolysis and gasification of biomass in biogas reactors

    Energy Technology Data Exchange (ETDEWEB)

    Mogensen, A.S.; Schmidt, J.E.; Angelidaki, R.; Ahring, B.K.

    1998-08-01

    The digestion and detoxification of pyrolysis condensate and wet oxidised pyrolysis condensate was studied in different reactor systems: combined anaerobic and denitrifying UASB reactors, conventional UASB reactors and CSTR`s. The pyrolysis condensate and the wet oxidised condensate have a biogas potential of 190 m{sup 3}/ton VS, and the low amount of suspended solids is allowing the waste water to be treated in the UASB reactor as well as in the CSTR. The pyrolysis condensate could successfully be degraded in a CSTR in a 5% concentration when co-digested with manure, and the wet oxidised pyrolysis condensate could be degraded when added at a concentration of 30%. The UASB reactor was preferred over the CSTR since the xenobiotic compounds present in the waste water might easily be absorbed in the co-substrate required when using the CSTR technology. Consequently, decreased degradation of xenobiotics would be observed in the CSTR. A combined anaerobic and denitrifying UASB reactor was successfully digesting 5.5% of wet oxidised pyrolysis condensate, but further loading increments deteriorated the anaerobic digestion process. However, when a UASB reactor was fed with pyrolysis condensate (up to 100%) good reactor operation was observed indicating that the waste could be used as substrate in the biogas process, even in very high concentrations. The detoxification of pyrolysis condensate was further studied and the toxicity of pyrolysis condensate was decreased more than 77 times in the UASB reactor that was operating on 100% pyrolysis condensate. Phenol, methyl and dimethyl phenols along with methoxyphenols were shown to be degraded within the rector systems. Degradation rates for phenol and substituted phenols were determined indicating that the biomass was selective towards the substrates. Maximum growth rates and half saturation constants for phenol, 4-Methylphenol and 2-Methoxy-4-methylphenol were determined in batch experiments. A UASB reactor concept was further

  9. Decommissioning strategy for liquid low-level radioactive waste surface storage water reservoir.

    Science.gov (United States)

    Utkin, S S; Linge, I I

    2016-11-22

    The Techa Cascade of water reservoirs (TCR) is one of the most environmentally challenging facilities resulted from FSUE "PA "Mayak" operations. Its reservoirs hold over 360 mln m(3) of liquid radioactive waste with a total activity of some 5 × 10(15) Bq. A set of actions implemented under a special State program involving the development of a strategic plan aimed at complete elimination of TCR challenges (Strategic Master-Plan for the Techa Cascade of water reservoirs) resulted in considerable reduction of potential hazards associated with this facility. The paper summarizes the key elements of this master-plan: defining TCR final state, feasibility study of the main strategies aimed at its attainment, evaluation of relevant long-term decommissioning strategy, development of computational tools enabling the long-term forecast of TCR behavior depending on various engineering solutions and different weather conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Extraction of Amino-J Acid from Waste-water by Emulsion Liquid Membrane

    Institute of Scientific and Technical Information of China (English)

    潘碌亭

    2006-01-01

    The emulsion liquid membrane technique was used to extract amino-J acid from industrial dye waste-water. The effects of stirring speed, ratio of the emulsion to water (Rew), ratio of the oil to internal phase (Roi) and membrane phase components on the extraction rate were investigated and optimized. The results showed that the extraction rate of amino-J acid approached 97% when the stirring speed was 300 r/min, Rew 1:6, Roi 1:1, trioctylamine (TOA) 3 mL/100 mL kerosene, and methyl-didecyle-alcohol-acrylate (LMA-2) 3 g/100 mL kerosene, respectively. The extraction rate had not changed with the oil phase reused for times.

  11. PCDD/PCDF presence in the waste water to depuration plant of Fusina - Venice

    Energy Technology Data Exchange (ETDEWEB)

    Paoli, P.; Cuomo, M.; Rubino, B.; Cossettini, P.; Zaccone, C. [Vesta spa, Venice (Italy); Pavanato, A. [Provincia di Venezia, Venice (Italy); Aimo, E. [Arpav Venezia, Venice (Italy)

    2004-09-15

    In July 1999 the Environmental Department issued a decree, well-known as Ronchi -Costa referring to authors' names, that imposed limits more and more restrictive for micropollutants concentrations, as PCDD/PCDF in waste water discharging in Venice Lagoon. Prior to the application of this decree, VESTA S.p.A., that manages the Fusina WWTP situated near Venice Lagoon, planned a systematic monitoring on all flows entering the plant, on produced sludge and on water discharging in lagoon. The aims of monitoring were: the determination of micropollutants source and nature; the individualization of tendency of the concentrations in final discharge and in sludge and to state possible correlations between entering and leaving quantities of pollutants.

  12. WATER RESISTANCE OF WOOD - PLASTIC COMPOSITES MADE FROM WASTE MATERIALS RESULTED IN THE FURNITURE MANUFACTURING PROCESS

    Directory of Open Access Journals (Sweden)

    Camelia COŞEREANU

    2014-12-01

    Full Text Available The purpose of this paper is to present innovative wood-plastic composites made from waste materials such as ABS (acrylonitrile butadiene styrene and wood shavings resulted in the furniture manufacturing process. From previous investigations (with regard to physical integrity and compactness of the panels, only mixtures ranging from a ratio of 100% ABS: 0% shavings to 80% ABS: 20% shavings were selected for water resistance testing. Swelling in thickness and water absorption for 2h and 24h were determined for the proposed wood-plastic composites. The results have shown that only a participation of up to 10% of wood shavings in the tested panels conducted to a good performance

  13. Parametric Analysis of Leachate and Water Resources around Municipal Solid Waste Landfill area in Solan

    Directory of Open Access Journals (Sweden)

    Sharma Deepika

    2016-01-01

    Full Text Available Leachate is defined as the liquid that drains from the landfill. The paper presents the physico-chemical, bacteriological and heavy metal testing results carried out for leachate, surface and sub-surface water samples collected from municipal solid waste landfill and different water sources in Solan to find out the effect of leachate percolation on groundwater quality. Physico-chemical parameters analysed were, pH, Total Dissolve Solid (TDS, sulphate, turbidity, Electrical Conductivity (EC while biological parameters tested were Biological Oxygen Demand (BOD, Chemical Oxygen Demand (COD, Most Probable Number (MPN test and ammonical nitrogen. Testing for heavy metals (Pb, Zn, Cr, Ni, Fe were carried out and have been reported. The results reveal that the leachate from the unlined landfill may have a significant impact on the groundwater resource (often used as drinking source particularly because of the toxic nature of the leachate coupled with the soil characteristics which is permeable in nature.

  14. Adsorption and removal of arsenic from water by iron ore mining waste.

    Science.gov (United States)

    Nguyen, Tien Vinh; Nguyen, Thi Van Trang; Pham, Tuan Linh; Vigneswaran, Saravanamuth; Ngo, Huu Hao; Kandasamy, J; Nguyen, Hong Khanh; Nguyen, Duc Tho

    2009-01-01

    There is a global need to develop low-cost technologies to remove arsenic from water for individual household water supply. In this study, a purified and enriched waste material (treated magnetite waste, TMW) from the Trai Cau's iron ore mine in the Thai Nguyen Province in Vietnam was examined for its capacity to remove arsenic. The treatment system was packed with TMW that consisted of 75% of ferrous-ferric oxide (Fe(3)O(4)) and had a large surface area of 89.7 m(2)/g. The experiments were conducted at a filtration rate of 0.05 m/h to treat groundwater with an arsenic concentration of 380 microg/L and iron, manganese and phosphate concentrations of 2.07 mg/L, 0.093 mg/L and 1.6 mg/L respectively. The batch experimental results show that this new material was able to absorb up to 0.74 mg arsenic/g. The results also indicated that the treatment system removed more than 90% arsenic giving an effluent with an arsenic concentration of less than 30 microg/L while achieving a removal efficiency of about 80% for Mn(2 + ) and PO(4) (3-). This could be a promising and cost-effective new material for capturing arsenic as well as other metals from groundwater.

  15. Treatment of nitrate-rich water in a baffled membrane bioreactor (BMBR) employing waste derived materials.

    Science.gov (United States)

    Basu, Subhankar; Singh, Saurabh K; Tewari, Prahlad K; Batra, Vidya S; Balakrishnan, Malini

    2014-12-15

    Nitrate removal in submerged membrane bioreactors (MBRs) is limited as intensive aeration (for maintaining adequate dissolved oxygen levels and for membrane scouring) deters the formation of anoxic zones essential for biological denitrification. The present study employs baffled membrane bioreactor (BMBR) to overcome this constraint. Treatment of nitrate rich water (synthetic and real groundwater) was investigated. Sludge separation was achieved using ceramic membrane filters prepared from waste sugarcane bagasse ash. A complex external carbon source (leachate from anaerobic digestion of food waste) was used to maintain an appropriate C/N ratio. Over 90% COD and 95% NO3-N reduction was obtained. The bagasse ash filters produced a clear permeate, free of suspended solids. Sludge aggregates were observed in the reactor and were linked to the high extracellular polymeric substances (EPS) content. Lower sludge volume index (40 mL/g compared to 150 mL/g for seed sludge), higher settling velocity (47 m/h compared to 10 m/h for seed sludge) and sludge aggregates (0.7 mm aggregates compared to filters in water treatment.

  16. Commercial Light Water Reactor -Tritium Extraction Facility Process Waste Assessment (Project S-6091)

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H.; Delley, A.O.; Alexander, G.J.; Clark, E.A.; Holder, J.S.; Lutz, R.N.; Malstrom, R.A.; Nobles, B.R. [Westinghouse Savannah River Co., Aiken, SC (United States); Carson, S.D. [Sandia National Laboratories, New Mexico, NM (United States); Peterson, P.K. [Sandia National Laboratories, New Mexico, NM (United States)

    1997-11-30

    The Savannah River Site (SRS) has been tasked by the Department of Energy (DOE) to design and construct a Tritium Extraction Facility (TEF) to process irradiated tritium producing burnable absorber rods (TPBARs) from a Commercial Light Water Reactor (CLWR). The plan is for the CLWR-TEF to provide tritium to the SRS Replacement Tritium Facility (RTF) in Building 233-H in support of DOE requirements. The CLWR-TEF is being designed to provide 3 kg of new tritium per year, from TPBARS and other sources of tritium (Ref. 1-4).The CLWR TPBAR concept is being developed by Pacific Northwest National Laboratory (PNNL). The TPBAR assemblies will be irradiated in a Commercial Utility light water nuclear reactor and transported to the SRS for tritium extraction and processing at the CLWR-TEF. A Conceptual Design Report for the CLWR-TEF Project was issued in July 1997 (Ref. 4).The scope of this Process Waste Assessment (PWA) will be limited to CLWR-TEF processing of CLWR irradiated TPBARs. Although the CLWR- TEF will also be designed to extract APT tritium-containing materials, they will be excluded at this time to facilitate timely development of this PWA. As with any process, CLWR-TEF waste stream characteristics will depend on process feedstock and contaminant sources. If irradiated APT tritium-containing materials are to be processed in the CLWR-TEF, this PWA should be revised to reflect the introduction of this contaminant source term.

  17. Determination of biological removal of recalcitrant organic contaminants in coal gasification waste water.

    Science.gov (United States)

    Ji, Qinhong; Tabassum, Salma; Yu, Guangxin; Chu, Chunfeng; Zhang, Zhenjia

    2015-01-01

    Coal gasification waste water treatment needed a sustainable and affordable plan to eliminate the organic contaminants in order to lower the potential environmental and human health risk. In this paper, a laboratory-scale anaerobic-aerobic intermittent system carried out 66 operational cycles together for the treatment of coal gasification waste water and the removal capacity of each organic pollutant. Contaminants included phenols, carboxylic acids, long-chain hydrocarbons, and heterocyclic compounds, wherein the relative content of phenol is up to 57.86%. The long-term removal of 77 organic contaminants was evaluated at different hydraulic retention time (anaerobic24 h + aerobic48 h and anaerobic48 h +aerobic48 h). Contaminant removal ranged from no measurable removal to near-complete removal with effluent concentrations below the detection limit. Contaminant removals followed one of four trends: steady-state removal throughout, increasing removal to steady state (acclimation), decreasing removal, and no removal. Organic degradation and transformation in the reaction were analysed by gas chromatography/mass spectrometry technology.

  18. Volatile fatty acids production from anaerobic treatment of cassava waste water: effect of temperature and alkalinity.

    Science.gov (United States)

    Hasan, Salah Din Mahmud; Giongo, Citieli; Fiorese, Mônica Lady; Gomes, Simone Damasceno; Ferrari, Tatiane Caroline; Savoldi, Tarcio Enrico

    2015-01-01

    The production of volatile fatty acids (VFAs), intermediates in the anaerobic degradation process of organic matter from waste water, was evaluated in this work. A batch reactor was used to investigate the effect of temperature, and alkalinity in the production of VFAs, from the fermentation of industrial cassava waste water. Peak production of total volatile fatty acids (TVFAs) was observed in the first two days of acidogenesis. A central composite design was performed, and the highest yield (3400 mg L(-1) of TVFA) was obtained with 30°C and 3 g L(-1) of sodium bicarbonate. The peak of VFA was in 45 h (pH 5.9) with a predominance of acetic (63%) and butyric acid (22%), followed by propionic acid (12%). Decreases in amounts of cyanide (12.9%) and chemical oxygen demand (21.6%) were observed, in addition to the production of biogas (0.53 cm(3) h(-1)). The process was validated experimentally and 3400 g L(-1) of TVFA were obtained with a low relative standard deviation.

  19. Cultivating Desmodesmus armatus (Chod. Hegew. in recirculating aquaculture systems (RAS waste water

    Directory of Open Access Journals (Sweden)

    Cheban Larisa

    2015-09-01

    Full Text Available The possibility of using RAS waste water as a cultivation medium for Desmodesmus armatus (Chod. Hegew. was investigated. Algal biomass increased continuously reaching its maximum on the day 40 of cultivation. D. armatus culture was characterized by a maximum content of total proteins of 23% on day 40 of cultivation. At the same time, 17 proteinogenic amino acids, including 9 replaceable and 8 essential acids, were detected and identified in D. armatus biomass. Among these amino acids, maximum contents of asparagine and glutamine were noted. A gradual increase in the number of total photosynthetic pigments until day 40 of cultivation was also observed. On day 40, the content of chlorophyll a, b, and carotenoids in D. armatus cells was maximal at 11.17, 7.07, and 12.05 mg g-1 dry weight, respectively. Therefore, cultivating microalgae D. armatus in RAS waste water permits obtaining an active growing culture that is characterized by a constant increase of biomass and high nutrient contents.

  20. Direct utilization of waste water algal biomass for ethanol production by cellulolytic Clostridium phytofermentans DSM1183.

    Science.gov (United States)

    Fathima, Anwar Aliya; Sanitha, Mary; Kumar, Thangarathinam; Iyappan, Sellamuthu; Ramya, Mohandass

    2016-02-01

    Direct bioconversion of waste water algal biomass into ethanol using Clostridium phytofermentans DSM1183 was demonstrated in this study. Fermentation of 2% (w/v) autoclaved algal biomass produced ethanol concentration of 0.52 g L(-1) (solvent yield of 0.19 g/g) where as fermentation of acid pretreated algal biomass (2%, w/v) produced ethanol concentration of 4.6 g L(-1) in GS2 media (solvent yield of 0.26 g/g). The control experiment with 2% (w/v) glucose in GS2 media produced ethanol concentration of 2.8 g L(-1) (solvent yield of 0.25 g/g). The microalgal strains from waste water algal biomass were identified as Chlamydomonas dorsoventralis, Graesiella emersonii, Coelastrum proboscideum, Scenedesmus obliquus, Micractinium sp., Desmodesmus sp., and Chlorella sp., based on ITS-2 molecular marker. The presence of glucose, galactose, xylose and rhamnose were detected by high performance liquid chromatography in the algal biomass. Scanning Electron Microscopy observations of fermentation samples showed characteristic morphological changes in algal cells and bioaccessibility of C. phytofermentans.