WorldWideScience

Sample records for waste repositories stage

  1. Nuclear-waste disposal in geologic repositories

    Energy Technology Data Exchange (ETDEWEB)

    Isherwood, D.

    1982-08-02

    Deep geologic repositories are being widely studied as the most favored method of disposal of nuclear waste. Scientists search for repository sites in salt, basalt, tuff and granite that are geologically and hydrologically suitable. The systematic evaluation of the safety and reliability of deep geologic disposal centers around the concept of interacting multiple barriers. The simplest element to describe of the geologic barrier is the physical isolation of the waste in a remote region at some depth within the rock unit. Of greater complexity is the hydrologic barrier which is determined by the waste dilution factors and groundwater flow rates. The least understood is the geochemical barrier, identified as a series of waste/water/rock interactions involving sorption, membrane filtration, precipitation and complexing. In addition to the natural barriers are the engineered barriers, which include the waste form and waste package. The relative effectiveness of these barriers to provide long-term isolation of nuclear waste from the human environment is being assessed through the use of analytical and numerical models. The data used in the models is generally adequate for parameter sensitivity studies which bound the uncertainties in the release and transport predictions; however, much of the data comes from laboratory testing, and the problem of correlating laboratory and field measurements has not been resolved. Although safety assessments based on generic sites have been useful in the past for developing site selection criteria, site-specific studies are needed to judge the suitability of a particular host rock and its environment.

  2. Repository documentation rethought. A comprehensive approach from untreated waste to waste packages for final disposal

    Energy Technology Data Exchange (ETDEWEB)

    Anthofer, Anton Philipp; Schubert, Johannes [VPC GmbH, Dresden (Germany)

    2017-11-15

    The German Act on Reorganization of Responsibility for Nuclear Disposal (Entsorgungsuebergangsgesetz (EntsorgUebG)) adopted in June 2017 provides the energy utilities with the new option of transferring responsibility for their waste packages to the Federal Government. This is conditional on the waste packages being approved for delivery to the Konrad final repository. A comprehensive approach starts with the dismantling of nuclear facilities and extends from waste disposal and packaging planning to final repository documentation. Waste package quality control measures are planned and implemented as early as in the process qualification stage so that the production of waste packages that are suitable for final deposition can be ensured. Optimization of cask and loading configuration can save container and repository volume. Workflow planning also saves time, expenditure and exposure time for personnel at the facilities. VPC has evaluated this experience and developed it into a comprehensive approach.

  3. Sweden picks site for waste repository

    Science.gov (United States)

    Stafford, Ned

    2009-07-01

    Nuclear power-plant operators in Sweden have selected a site where they can permanently store the country's spent nuclear fuel. The repository would be located 500 m below ground at Forsmark, roughly 200km north of Stockholm, which is already home to a nuclear power plant. The decision was taken after two decades of study by the Swedish Nuclear Fuel and Waste Management Company (SKB), which is owned by the country's nuclear firms.

  4. Integrated management system for radioactive waste repositories (SGI3R)

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fabio; Tello, Cledola Cassia Oliveira de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: silvaf@cdtn.br, e-mail: tellocc@cdtn.br

    2009-07-01

    The implantation of a repository for radioactive wastes is a multidisciplinary project that needs specialists of different areas of knowledge, interaction with public and private institutions, data and information related to radioactive wastes, geology, technology etc. All the activities must be in accordance with norms, requirements and procedures, including national and international legislation. The maintenance of the waste inventory records is an important regulatory requirement and must be available even after the closure of the repository. CDTN - Center of Nuclear Technology Development - is coordinating the Project for the construction of the national repository to dispose the low -and intermediate-level wastes. In order to consolidate all information that will come from this Project, it is being developed and implanted in CDTN a manager system of database, called Integrated Management System for Radioactive Waste Repositories (SGI3R), which will also manage all data from previous work carried out in Brazil and around the world about this subject. The proposal is to build a structure of modules, having as base eight modules: inventory, site selection, types of repository, technology, partners, legislation, communication and documents. The SGI3R running comprises the data processing (inclusion, update and exclusion), integration, standardization, and consistency among the processes. The SGI3R will give support to the stages of this Project, which will allow the preservation of all the available information, preventing duplication of efforts and additional costs, improving, in this way, the Project planning and execution. Additionally the SGI3R will make possible the information access to all stakeholders. (author)

  5. Geologic environments for nuclear waste repositories

    Directory of Open Access Journals (Sweden)

    Paleologos Evan K.

    2017-01-01

    Full Text Available High-level radioactive waste (HLW results from spent reactor fuel and reprocessed nuclear material. Since 1957 the scientific consensus is that deep geologic disposal constitutes the safest means for isolating HLW for long timescales. Nuclear power is becoming significant for the Arab Gulf countries as a way to diversify energy sources and drive economic developments. Hence, it is of interest to the UAE to examine the geologic environments currently considered internationally to guide site selection. Sweden and Finland are proceeding with deep underground repositories mined in bedrock at depths of 500m, and 400m, respectively. Equally, Canada’s proposals are deep burial in the plutonic rock masses of the Canadian Shield. Denmark and Switzerland are considering disposal of their relative small quantities of HLW into crystalline basement rocks through boreholes at depths of 5,000m. In USA, the potential repository at Yucca Mountain, Nevada lies at a depth of 300m in unsaturated layers of welded volcanic tuffs. Disposal of low and intermediate-level radioactive wastes, as well as the German HLW repository favour structurally-sound layered salt stata and domes. Our article provides a comprehensive review of the current concepts regarding HLW disposal together with some preliminary analysis of potentially appropriate geologic environments in the UAE.

  6. Waste package/repository impact study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1985-09-01

    The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs.

  7. Characteristics of potential repository wastes. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    The LWR spent fuels discussed in Volume 1 of this report comprise about 99% of all domestic non-reprocessed spent fuel. In this report we discuss other types of spent fuels which, although small in relative quantity, consist of a number of diverse types, sizes, and compositions. Many of these fuels are candidates for repository disposal. Some non-LWR spent fuels are currently reprocessed or are scheduled for reprocessing in DOE facilities at the Savannah River Site, Hanford Site, and the Idaho National Engineering Laboratory. It appears likely that the reprocessing of fuels that have been reprocessed in the past will continue and that the resulting high-level wastes will become part of defense HLW. However, it is not entirely clear in some cases whether a given fuel will be reprocessed, especially in cases where pretreatment may be needed before reprocessing, or where the enrichment is not high enough to make reprocessing attractive. Some fuels may be canistered, while others may require special means of disposal. The major categories covered in this chapter include HTGR spent fuel from the Fort St. Vrain and Peach Bottom-1 reactors, research and test reactor fuels, and miscellaneous fuels, and wastes generated from the decommissioning of facilities.

  8. Nuclear waste repository in basalt: preconceptual design guidelines

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    The development of the basalt waste isolation program parallels the growing need for permanent, environmentally safe, and secure means to store nuclear wastes. The repository will be located within the Columbia Plateau basalt formations where these ends can be met and radiological waste can be stored. These wastes will be stored such that the wastes may be retrieved from storage for a period after placement. After the retrieval period, the storage locations will be prepared for terminal storage. The terminal storage requirements will include decommissioning provisions. The facility boundaries will encompass no more than several square miles of land which will be above a subsurface area where the geologic makeup is primarily deep basaltic rock. The repository will receive, from an encapsulation site(s), nuclear waste in the form of canisters (not more than 18.5 feet x 16 inches in diameter) and containers (55-gallon drums). Canisters will contain spent fuel (after an interim 5-year storage period), solidified high-level wastes (HLW), or intermediate-level wastes (ILW). The containers (drums) will package the low-level transuranic wastes (LL-TRU). The storage capacity of the repository will be expanded in a time-phased program which will require that subsurface development (repository expansion) be conducted concurrently with waste storage operations. The repository will be designed to store the nuclear waste generated within the predictable future and to allow for reasonable expansion. The development and assurance of safe waste isolation is of paramount importance. All activities will be dedicated to the protection of public health and the environment. The repository will be licensed by the US Nuclear Regulatory Commission (NRC). Extensive efforts will be made to assure selection of a suitable site which will provide adequate isolation.

  9. Selection of Corrosion Resistant Materials for Nuclear Waste Repositories

    Energy Technology Data Exchange (ETDEWEB)

    R.B. Rebak

    2006-08-28

    Several countries are considering geological repositories to dispose of nuclear waste. The environment of most of the currently considered repositories will be reducing in nature, except for the repository in the US, which is going to be oxidizing. For the reducing repositories, alloys such as carbon steel, stainless steels and titanium are being evaluated. For the repository in the US, some of the most corrosion resistant commercially available alloys are being investigated. This paper presents a summary of the behavior of the different materials under consideration for the repositories and the current understanding of the degradation modes of the proposed alloys in ground water environments from the point of view of general corrosion, localized corrosion and environmentally assisted cracking.

  10. Public concerns and choices regarding nuclear waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Rankin, W.L.; Nealey, S.M.

    1981-06-01

    Survey research on nuclear power issues conducted in the late 1970's has determined that nuclear waste management is now considered to be one of the most important nuclear power issues both by the US public and by key leadership groups. The purpose of this research was to determine the importance placed on specific issues associated with high-level waste disposal. In addition, policy option choices were asked regarding the siting of both low-level and high-level nuclear waste repositories. A purposive sampling strategy was used to select six groups of respondents. Averaged across the six respondent groups, the leakage of liquid wastes from storage tanks was seen as the most important high-level waste issue. There was also general agreement that the issue regarding water entering the final repository and carrying radioactive wastes away was second in importance. Overall, the third most important issue was the corrosion of the metal containers used in the high-level waste repository. There was general agreement among groups that the fourth most important issue was reducing safety to cut costs. The fifth most important issue was radioactive waste transportation accidents. Overall, the issues ranked sixth and seventh were, respectively, workers' safety and earthquakes damaging the repository and releasing radioactivity. The eighth most important issue, overall, was regarding explosions in the repository from too much radioactivity, which is something that is not possible. There was general agreement across all six respondent groups that the two least important issues involved people accidentally digging into the site and the issue that the repository might cost too much and would therefore raise electricity bills. These data indicate that the concerns of nuclear waste technologists and other public groups do not always overlap.

  11. International perspective on repositories for low level waste

    Energy Technology Data Exchange (ETDEWEB)

    Bergstroem, Ulla; Pers, Karin; Almen, Ylva (SKB International AB (Sweden))

    2011-12-15

    Nuclear energy production gives rise to different types of radioactive waste. The use of nuclear isotopes within the research, industry and medical sectors also generates radioactive waste. To protect man and the environment from radiation the waste is isolated and contained by deposition in repositories. These repositories may have various designs regarding location, barriers etc depending on the potential danger of the waste. In Sweden, low- and intermediate level waste (LILW) is disposed of in the SFR repository in Forsmark. The repository is located 60 metres down into the bedrock under the bottom of the sea and covered by 6 metres of water. It is planned to extend SFR to accommodate decommissioning waste from the dismantling of the Swedish nuclear power facilities and also for the additional operation waste caused by the planned prolonged operation time. When planning the extension consultations will be carried out with the host municipality, authorities, organisations and general public. In planning the extension, SKB has performed a worldwide compilation of how other countries have, or plan to, handle the final disposal of similar wastes. The aim of this report is to give a brief description of LILW repositories worldwide; including general brief descriptions of many facilities, descriptions of the waste and the barriers as well as safety assessments for a few chosen repositories which represent different designs. The latter is performed, where possible, to compare certain features against the Swedish SFR. To provide a background and context to this study, international organisations and conventions are also presented along with internationally accepted principles regarding the management of radioactive waste. Similar to SFR, suitable locations for the repositories have, in many countries, been found at sites that already have, or used to have nuclear activities, such as reactor sites. Abandoned and disused mines, such as the salt mines in Germany, also

  12. Modeling transient heat transfer in nuclear waste repositories.

    Science.gov (United States)

    Yang, Shaw-Yang; Yeh, Hund-Der

    2009-09-30

    The heat of high-level nuclear waste may be generated and released from a canister at final disposal sites. The waste heat may affect the engineering properties of waste canisters, buffers, and backfill material in the emplacement tunnel and the host rock. This study addresses the problem of the heat generated from the waste canister and analyzes the heat distribution between the buffer and the host rock, which is considered as a radial two-layer heat flux problem. A conceptual model is first constructed for the heat conduction in a nuclear waste repository and then mathematical equations are formulated for modeling heat flow distribution at repository sites. The Laplace transforms are employed to develop a solution for the temperature distributions in the buffer and the host rock in the Laplace domain, which is numerically inverted to the time-domain solution using the modified Crump method. The transient temperature distributions for both the single- and multi-borehole cases are simulated in the hypothetical geological repositories of nuclear waste. The results show that the temperature distributions in the thermal field are significantly affected by the decay heat of the waste canister, the thermal properties of the buffer and the host rock, the disposal spacing, and the thickness of the host rock at a nuclear waste repository.

  13. Anticipated Degradation Modes of Metallic Engineered Barriers for High-Level Nuclear Waste Repositories

    Science.gov (United States)

    Rodríguez, Martín A.

    2014-03-01

    Metallic engineered barriers must provide a period of absolute containment to high-level radioactive waste in geological repositories. Candidate materials include copper alloys, carbon steels, stainless steels, nickel alloys, and titanium alloys. The national programs of nuclear waste management have to identify and assess the anticipated degradation modes of the selected materials in the corresponding repository environment, which evolves in time. Commonly assessed degradation modes include general corrosion, localized corrosion, stress-corrosion cracking, hydrogen-assisted cracking, and microbiologically influenced corrosion. Laboratory testing and modeling in metallurgical and environmental conditions of similar and higher aggressiveness than those expected in service conditions are used to evaluate the corrosion resistance of the materials. This review focuses on the anticipated degradation modes of the selected or reference materials as corrosion-resistant barriers in nuclear repositories. These degradation modes depend not only on the selected alloy but also on the near-field environment. The evolution of the near-field environment varies for saturated and unsaturated repositories considering backfilled and unbackfilled conditions. In saturated repositories, localized corrosion and stress-corrosion cracking may occur in the initial aerobic stage, while general corrosion and hydrogen-assisted cracking are the main degradation modes in the anaerobic stage. Unsaturated repositories would provide an oxidizing environment during the entire repository lifetime. Microbiologically influenced corrosion may be avoided or minimized by selecting an appropriate backfill material. Radiation effects are negligible provided that a thick-walled container or an inner shielding container is used.

  14. Final repository for Denmark's low- and intermediate level radioactive waste

    Science.gov (United States)

    Nilsson, B.; Gravesen, P.; Petersen, S. S.; Binderup, M.

    2012-12-01

    Bertel Nilsson*, Peter Gravesen, Stig A. Schack Petersen, Merete Binderup Geological Survey of Denmark and Greenland (GEUS), Øster Voldgade 10, 1350 Copenhagen, Denmark, * email address bn@geus.dk The Danish Parliament decided in 2003 that the temporal disposal of the low- and intermediate level radioactive waste at the nuclear facilities at Risø should find another location for a final repository. The Danish radioactive waste must be stored on Danish land territory (exclusive Greenland) and must hold the entire existing radioactive waste, consisting of the waste from the decommissioning of the nuclear facilities at Risø, and the radioactive waste produced in Denmark from hospitals, universities and industry. The radioactive waste is estimated to a total amount of up to 10,000 m3. The Geological Survey of Denmark and Greenland, GEUS, is responsible for the geological studies of suitable areas for the repository. The task has been to locate and recognize non-fractured Quaternary and Tertiary clays or Precambrian bedrocks with low permeability which can isolate the radioactive waste from the surroundings the coming more than 300 years. Twenty two potential areas have been located and sequential reduced to the most favorable two to three locations taking into consideration geology, hydrogeology, nature protection and climate change conditions. Further detailed environmental and geology investigations will be undertaken at the two to three potential localities in 2013 to 2015. This study together with a study of safe transport of the radioactive waste and an investigation of appropriate repository concepts in relation to geology and safety analyses will constitute the basis upon which the final decision by the Danish Parliament on repository concept and repository location. The final repository is planned to be established and in operation at the earliest 2020.

  15. GIS for the needs of the Radioactive Waste Repository Authority

    Directory of Open Access Journals (Sweden)

    Jitka Mikšová

    2007-06-01

    Full Text Available The Radioactive Waste Repository Authority (RAWRA is a state organisation responsible for the management of activities related to the disposal of all existing and future radioactive waste and spent nuclear fuel classed as a waste in Czech Republic. Worldwide, a deep geological repository is considered the highest degree of safety for a nuclear waste disposal. Such a repository has to be built in a stable geological environment ensuring the isolation of the stored radioactive waste from the surrounding environment for a long period of time. The selection of suitable site for the deep geological repository construction is a complicated and long term process. Considering this fact and also in respect to an assumed volume of varied datasets the GIS RAWRA was established to ensure convenient management and availability of data containing spatial information.The system is based on ESRI (ArcInfo including extensions, ArcSDE, ArcIMS, Leica Geosystems (Image Analysis and Microsoft software (MS SQL Server. Resulting datasets from six recommended potentially suitable sites for the location of a geological repository have been incorporated into the geodatabase to date. The necessary analysis was made using ESRI software tools and, in addition, custom applications were developed including the metadata editor, etc. This analysis was carried out with respect to existing geological and non-geological criteria defined for a nuclear waste repository. Finally, all six investigated sites with a total area of 240 km2 were reduced in area, each of them resulting in an area of approximately 10km2 for further detailed characterisation.

  16. Expected brine movement at potential nuclear waste repository salt sites

    Energy Technology Data Exchange (ETDEWEB)

    McCauley, V.S.; Raines, G.E.

    1987-08-01

    The BRINEMIG brine migration code predicts rates and quantities of brine migration to a waste package emplaced in a high-level nuclear waste repository in salt. The BRINEMIG code is an explicit time-marching finite-difference code that solves a mass balance equation and uses the Jenks equation to predict velocities of brine migration. Predictions were made for the seven potentially acceptable salt sites under consideration as locations for the first US high-level nuclear waste repository. Predicted total quantities of accumulated brine were on the order of 1 m/sup 3/ brine per waste package or less. Less brine accumulation is expected at domal salt sites because of the lower initial moisture contents relative to bedded salt sites. Less total accumulation of brine is predicted for spent fuel than for commercial high-level waste because of the lower temperatures generated by spent fuel. 11 refs., 36 figs., 29 tabs.

  17. Gas generation and migration from radioactive waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Agg, P.J.; Nash, P.J.; Rodwell, W.R.; Lineham, T.R. [AEA Technology, Harwell (United Kingdom)

    1995-12-31

    During the post-closure phase of a repository for low- and intermediate-level radioactive wastes significant quantities of gas will be generated, primarily by the anaerobic corrosion of metals and the degradation of organic wastes. A description is given of recent work carried out within the Nirex Safety Assessment Research Program to address the generation of gas within a repository and the migration of gas from the repository to the biosphere. Theoretical modeling capabilities have been developed to address both of these issues. In order to gain confidence in such theoretical models, it is important to validate model predictions against observed experimental data. Preliminary experiments carried out to help validate the modeling approaches are described.

  18. Site suitability criteria for solidified high level waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Heckman, R.A.; Holdsworth, T.; Towse, D.F.

    1979-03-07

    Activities devoted to development of regulations, criteria, and standards for storage of solidified high-level radioactive wastes are reported. The work is summarized in sections on site suitability regulations, risk calculations, geological models, aquifer models, human usage model, climatology model, and repository characteristics. Proposed additional analytical work is also summarized. (JRD)

  19. Characteristics of potential repository wastes. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This document, and its associated appendices and microcomputer (PC) data bases, constitutes the reference OCRWM data base of physical and radiological characteristics data of radioactive wastes. This Characteristics Data Base (CDB) system includes data on spent nuclear fuel and high-level waste (HLW), which clearly require geologic disposal, and other wastes which may require long-term isolation, such as sealed radioisotope sources. The data base system was developed for OCRWM by the CDB Project at Oak Ridge National Laboratory. Various principal or official sources of these data provided primary information to the CDB Project which then used the ORIGEN2 computer code to calculate radiological properties. The data have been qualified by an OCRWM-sponsored peer review as suitable for quality-affecting work meeting the requirements of OCRWM`s Quality Assurance Program. The wastes characterized in this report include: light-water reactor (LWR) spent fuel and immobilized HLW.

  20. Integrated management system for radioactive waste repositories (SGI3R)

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fabio; Tello, Cledola Cassia Oliveira de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mail: silvaf@cdtn.br; tellocc@cdtn.br

    2007-07-01

    The site selection process, the construction and the operation of radioactive wastes repositories should meet the requirements specified by standards and it is usually carried out by professionals from different areas, such as geology, hydrology, biology, chemistry, physics of radiation, meteorology, engineering and law. In Brazil, the data about repository studies are dispersed and they are resultant from individual or small group efforts. Then it is very import to consolidate and recover efficiently this information. In the Center of Development of Nuclear Technology (CDTN), the Project Repository includes: the site selection and characterization, technology development for the optimization of the engineering barriers performance, term-source calculation and safety assessment, among others. The results of this project must be integrated, organized and presented in such a way that all data can be useful and easily recovered by the involved areas and institutions. In order to have the effective control of these data and to fulfill the requirements, it will be elaborated and implanted in CDTN/CNEN, a manager system of database, called Integrated Management System for Radioactive Waste Repositories (SGI3R), compatible with Windows(TM) NT and Windows(TM)XP in Access(TM), with the purpose of supplying the managerial and technical needs of the Project Repository. The SGI3R will consist of relational tables, protocols and reports, which will allow the preservation of all the available information, preventing duplication of efforts and additional costs, improving, in this way, the Project planning and execution. (author)

  1. CATSIUS CLAY PROJECT: Calculation and testing of behaviour of unsaturated clay as barrier in radioactive waste repositories: stage 3: validation exercises at a large in situ scale

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, E. E.; Alcoverro, J.

    1999-07-01

    Stage 3 of CATSIUS CLAY Project: Validation Exercises at a Large in situ Scale includes two Benchmarks: Benchmark 3.1: In situ Hydration of Boom Clay Pellets (BACCHUS 2) and Benchmark 3.2: FEBEX Mock-up Test. The BACCHUS 2 in situ test was performed in the HADES underground laboratory (Mol, Belgium) to demonstrate and optimize an installation procedure for a clay based material and to study its hydration process. After drilling a vertical shaft (540 mm in diameter, 3.0 m in length) in the host Boom clay, a central filter (90 mm in diameter) was placed, the remaining space was filled with a mixture of clay pellets and clay powder and the assembly was sealed at the upper end by a resin plug (0.20 m in thickness) over which concrete was poured. The test was instrumented so that it could be used as a validation experiment. Total stress, pore water pressure and water content measurements were performed both in the backfill material and in the surrounding clay massif. Once the installation was complete, the natural hydration of the backfill material began (day 0). To accelerate the hydration process, on day 516 water was injected through the central filter. On day 624, after the saturation of the backfill was reached, the hydraulic circuit was closed and the undrained response of the system backfill-host clay was monitored until an overall steady state was reached. Partners were asked to provide predictions for the evolution of the pore water pressure and total pressure of various points where appropriate sensors are installed. This benchmark addresses the Hydro-Mechanical response of an unsaturated low density clay barrier under natural and artificial hydration. (Author)

  2. Catsius Clay Project. Calculation and Testing of Behaviour of Unsaturated Clay as Barrier in Radioactive Waste Repositories. Stage 2: Validation Exercises at Laboratory scale

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, E. E.; Alcoverro, J.

    1999-07-01

    Stage 2 of CATSIUS CLAY Project: Validation Exercises at Laboratory Scale includes two Benchmarks, Benchmark 2.1: Oedometer Suction Controlled Tests on Samples of compacted Boom Clay and Benchmark 2.2: Small Scale Weltting-Heating Test on Compacted Bentonite. BM 2.1 had two parts: BM 2.1A (volumetric deformation upon wetting-drying cycles) and BM 2.1 B (swelling pressure test). In BM 2.1A, participants were asked to model the results of a series of five tests on samples of compacted Boom clay. In BM 2.1B, a swelling pressure test in which suction, vertical and horizontal stresses were monitored, was proposed as a blind exercise. Participants were asked to use, without further changes, the models calibrated in BM 2.1A. This exercise provides an evaluation of the capabilities of current mechanical constitutive models for unsaturated clay behaviour. It was found that, even if a calibration exercise on the basis of known experimental data is satisfactory, blind predictions of tests involving different paths may prove difficult. The test set up for BM 2.2 consisted of a stainless stell cell filled with highly expansive compacted bentonite (S2 clay from Almeria, Spain). The clay was subjected to a simultaneous central heating and a progressive water inflow through the botton plate. Temperature at various locations within the sample and the boundary radial stress were monitored throughout the test. Water content distribution was also measured at the end of the experiment. Predictions for this benchmark required the solution of field equations for flow, temperature distribution and mechanical analysis. Model parameters were derived from the extensive set of available experiments on this clay. Comparison between model predictions and measurements revealed the significance of water transport in vapour phase, the difficulties to predict boundary stresses and the general good agreement between measured and calculated temperatures. The report provides a detailed accojnt of the

  3. Review of important rock mechanics studies required for underground high level nuclear waste repository program

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, S.; Cho, W. J

    2007-01-15

    Disposal concept adapting room and pillar method, which is a confirmed technique in mining and tunnel construction for long time, has advantages at cost, safety, technical feasibility, flexibility, and international cooperation point of views. Then the important rock mechanics principals and in situ and laboratory tests for understanding the behavior of rock, buffer, and backfill as well as their interactions will be reviewed. The accurate understanding of them is important for developing a safe disposal concept and successful operation of underground repository for permanent disposal of radioactive wastes. First of all, In this study, current status of rock mechanics studies for HLW disposal in foreign countries such as Sweden, USA, Canada, Finland, Japan, and France were reviewed. After then the in situ and laboratory tests for site characterization were summarized. Furthermore, rock mechanics studies required during the whole procedure for the disposal project from repository design to the final closure will be reviewed systematically. This study will help for developing a disposal system including site selection, repository design, operation, maintenance, and closure of a repository in deep underground rock. By introducing the required rock mechanics tests at different stages, it would be helpful from the planning stage to the operation stage of a radioactive waste disposal project.

  4. Can clays ensure nuclear waste repositories?

    Science.gov (United States)

    Zaoui, A; Sekkal, W

    2015-03-06

    Research on argillite as a possible host rock for nuclear waste disposal is still an open subject since many issues need to be clarified. In the Underground Research Laboratories constructed for this purpose, a damaged zone around the excavation has been systematically observed and characterized by the appearance of micro-fissures. We analyse here -at nanoscale level- the calcite/clay assembly, the main constituents of argillite, under storage conditions and show the fragility of the montmorillonite with respect to calcite. Under anisotropic stress, we have observed a shear deformation of the assembly with the presence of broken bonds in the clay mineral, localised in the octahedral rather than the tetrahedral layers. The stress/strain curve leads to a failure strength point at 18.5 MPa. The obtained in-plane response of the assembly to perpendicular deformation is characterized by smaller perpendicular moduli Ez = 48.28 GPa compared to larger in-plane moduli Ex = 141.39 GPa and Ey = 134.02 GPa. Our calculations indicate the instability of the assembly without water molecules at the interface in addition to an important shear deformation.

  5. The waste isolation pilot plant transuranic waste repository: A case study in radioactive waste disposal safety and risk

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Leif G. [GRAM, Inc., Albuquerque, NM (United States)

    1999-12-01

    The Waste Isolation Pilot Plant (WIPP) deep geological defense-generated transuranic radioactive waste (TRUW) repository in the United States was certified on the 13 of May 1998 and opened on the 26 of March 1999. Two sets of safety/performance assessment calculations supporting the certification of the WIPP TRUW repository show that the maximum annual individual committed effective dose will be 32 times lower than the regulatory limit and that the cumulative amount of radionuclide releases will be at least 10 times, more likely at least 20 times, lower than the regulatory limits. Yet, perceptions remain among the public that the WIPP TRUW repository imposes an unacceptable risk.

  6. Sugeno integral ranking of release scenarios in a low and intermediate waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. Ho; Kim, Tae Woon; Ha, Jae Joo [Korea Atomic Energy Reserach Institute, Taejon (Korea, Republic of)

    2004-11-15

    In the present study, a multi criteria decision-making (MCDM) problem of ranking of important radionuclide release scenarios in a low and intermediate radioactive waste repository is to treat on the basis of {lambda}-fuzzy measures and Sugeno integral. Ranking of important scenarios can lead to the provision of more effective safety measure in a design stage of the repository. The ranking is determined by a relative degree of appropriateness of scenario alternatives. To demonstrate a validation of the proposed approach to ranking of release scenarios, results of the previous AHP study are used and compared with them of the present SIAHP approach. Since the AHP approach uses importance weight based on additive probability measures, the interaction among criteria is ignored. The comparison of scenarios ranking obtained from these two approaches enables us to figure out the effect of different models for interaction among criteria.

  7. Geotechnical support and topical studies for nuclear waste geologic repositories

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The present report lists the technical reviews and comments made during the fiscal year 1988 and summarizes the technical progress of the topical studies. In the area of technical assistance, there were numerous activities detailed in the next section. These included 24 geotechnical support activities, including reviews of 6 Study Plans (SP) and participation in 6 SP Review Workshops, review of one whole document Site Characterization Plan (SCP) and participation in the Assembled Document SCP Review Workshops by 6 LBL reviewers; the hosting of a DOE program review, the rewriting of the project statement of work, 2 trips to technical and planning meetings; preparation of proposed work statements for two new topics for DOE, and 5 instances of technical assistance to DOE. These activities are described in a Table in the following section entitled Geoscience Technical Support for Nuclear Waste Geologic Repositories.''

  8. Radionuclide transport behavior in a generic geological radioactive waste repository.

    Science.gov (United States)

    Bianchi, Marco; Liu, Hui-Hai; Birkholzer, Jens T

    2015-01-01

    We performed numerical simulations of groundwater flow and radionuclide transport to study the influence of several factors, including the ambient hydraulic gradient, groundwater pressure anomalies, and the properties of the excavation damaged zone (EDZ), on the prevailing transport mechanism (i.e., advection or molecular diffusion) in a generic nuclear waste repository within a clay-rich geological formation. By comparing simulation results, we show that the EDZ plays a major role as a preferential flowpath for radionuclide transport. When the EDZ is not taken into account, transport is dominated by molecular diffusion in almost the totality of the simulated domain, and transport velocity is about 40% slower. Modeling results also show that a reduction in hydraulic gradient leads to a greater predominance of diffusive transport, slowing down radionuclide transport by about 30% with respect to a scenario assuming a unit gradient. In addition, inward flow caused by negative pressure anomalies in the clay-rich formation further reduces transport velocity, enhancing the ability of the geological barrier to contain the radioactive waste. On the other hand, local high gradients associated with positive pressure anomalies can speed up radionuclide transport with respect to steady-state flow systems having the same regional hydraulic gradients. Transport behavior was also found to be sensitive to both geometrical and hydrogeological parameters of the EDZ. Results from this work can provide useful knowledge toward correctly assessing the post-closure safety of a geological disposal system. © 2014, National Ground Water Association.

  9. Main organic materials in a repository for high level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Hallbeck, Lotta [Vita vegrandis, Hindaas (Sweden); Grive, Mireia; Gaona, Xavier; Duro, Lara; Bruno, Jordi [Enviros Consulting, Valldoreix, Barcelona (Spain)

    2007-11-15

    , although the presence of aromatic compounds and PAHs in groundwater is not desirable by itself, they are of no consequence for the long-term performance of the repository. 5. Detergents and lubricants. The same reasoning as for fuels and engine emissions can be applied in this case. The amount of detergents should be minimized, although in the amounts that they are expected to occur, no important impact is foreseen. 6. Materials from human activities. Among them, the ones having potentially a more important effect are fibres from clothes, due to the presence of cellulose, and therefore it is recommended to minimise human-related wastes, although no large amounts of these materials are expected to be present after the repository closure. The effects that organic substances can have in the repository will always depend on the amounts present in the repository after closure. The estimated average concentrations are below 1.7x10{sup -4} kg/m{sup 3} (0.17 mg/L) of hydrocarbons in the deposition tunnels and less than 8.4x10{sup -4} kg/m{sup 3} (0.84 mg/L) of carbohydrates, assuming a total saturation in the pore water and an even distribution of the organic materials. This should be compared to the organic material found in groundwater at natural circumstances. At 500 m depth the DOC (dissolved organic carbon) content usually are approximately 0.5.2 mg/L. Three processes are deemed to have the largest possible impact on the performance of the repository: i) Increase of the reducing capacity and decrease of the redox potential in the short-term, and increased rate of depletion of the oxygen trapped during the repository operation stage. ii) Increase in the complexing capacity of the groundwater due to the presence of organic complexants, which is expected to be a process of more relevance in the long-term. Many organic molecules with complexing capacity, such as short organic acids like acetate are, however, oxidised as a consequence of microbial metabolism. The acetate

  10. Science is the first step to siting nuclear waste repositories

    Science.gov (United States)

    Neuzil, Christopher E.

    2014-01-01

    As Shaw [2014] notes, U.S. research on shale as a repository host was halted before expending anything close to the effort devoted to studying crystalline rock, salt, and - most notably - tuff at Yucca Mountain. The new political reality regarding Yucca Mountain may allow reconsideration of the decision to abandon research on shale as a repository host.

  11. Development of database systems for safety of repositories for disposal of radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yeong Hun; Han, Jeong Sang; Shin, Hyeon Jun; Ham, Sang Won; Kim, Hye Seong [Yonsei Univ., Seoul (Korea, Republic of)

    1999-03-15

    In the study, GSIS os developed for the maximizing effectiveness of the database system. For this purpose, the spatial relation of data from various fields that are constructed in the database which was developed for the site selection and management of repository for radioactive waste disposal. By constructing the integration system that can link attribute and spatial data, it is possible to evaluate the safety of repository effectively and economically. The suitability of integrating database and GSIS is examined by constructing the database in the test district where the site characteristics are similar to that of repository for radioactive waste disposal.

  12. Climate considerations in long-term safety assessments for nuclear waste repositories.

    Science.gov (United States)

    Näslund, Jens-Ove; Brandefelt, Jenny; Liljedahl, Lillemor Claesson

    2013-05-01

    For a deep geological repository for spent nuclear fuel planned in Sweden, the safety assessment covers up to 1 million years. Climate scenarios range from high-end global warming for the coming 100 000 years, through deep permafrost, to large ice sheets during glacial conditions. In contrast, in an existing repository for short-lived waste the activity decays to low levels within a few tens of thousands of years. The shorter assessment period, 100 000 years, requires more focus on climate development over the coming tens of thousands of years, including the earliest possibility for permafrost growth and freezing of the engineered system. The handling of climate and climate change in safety assessments must be tailor-made for each repository concept and waste type. However, due to the uncertain future climate development on these vast time scales, all safety assessments for nuclear waste repositories require a range of possible climate scenarios.

  13. Climate Considerations in Long-Term Safety Assessments for Nuclear Waste Repositories

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, Jens-Ove; Brandefelt, Jenny; Claesson Liljedahl, Lillemor [Svensk Kaernbraenslehantering AB, Stockholm (Sweden)], E-mail: jens-ove.naslund@skb.se

    2013-05-15

    For a deep geological repository for spent nuclear fuel planned in Sweden, the safety assessment covers up to 1 million years. Climate scenarios range from high-end global warming for the coming 100 000 years, through deep permafrost, to large ice sheets during glacial conditions. In contrast, in an existing repository for short-lived waste the activity decays to low levels within a few tens of thousands of years. The shorter assessment period, 100 000 years, requires more focus on climate development over the coming tens of thousands of years, including the earliest possibility for permafrost growth and freezing of the engineered system. The handling of climate and climate change in safety assessments must be tailor-made for each repository concept and waste type. However, due to the uncertain future climate development on these vast time scales, all safety assessments for nuclear waste repositories require a range of possible climate scenarios.

  14. Viability Assessment of a Repository at Yucca Mountain. Volume 2: Preliminary Design Concept for the Repository and Waste Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-01

    This volume describes the major design features of the Monitored Geologic Repository. This document is not intended to provide an exhaustive, detailed description of the repository design. Rather, this document summarizes the major systems and primary elements of the design that are radiologically significant, and references the specific technical documents and design analyses wherein the details can be found. Not all portions of the design are at the same level of completeness. Highest priority has been given to assigning resources to advance the design of the Monitored Geologic Repository features that are important to radiological safety and/or waste isolation and for which there is no NRC licensing precedent. Those features that are important to radiological safety and/or waste isolation, but for which there is an NRC precedent, receive second priority. Systems and features that have no impact on radiological safety or waste isolation receive the lowest priority. This prioritization process, referred to as binning, is discussed in more detail in Section 2.3. Not every subject discussed in this volume is given equal treatment with regard to the level of detail provided. For example, less detail is provided for the surface facility design than for the subsurface and waste package designs. This different level of detail is intentional. Greater detail is provided for those functions, structures, systems, and components that play key roles with regard to protecting radiological health and safety and that are not common to existing nuclear facilities already licensed by NRC. A number of radiological subjects are not addressed in the VA, (e.g., environmental qualification of equipment). Environmental qualification of equipment and other radiological safety considerations will be addressed in the LA. Non-radiological safety considerations such as silica dust control and other occupational safety considerations are considered equally important but are not addressed in

  15. Coupled thermo–hydro–mechanical processes for the Dutch radioactive waste repository

    NARCIS (Netherlands)

    Buragohain, P.; Vardon, P.J.; Hicks, M.A.; Vardon, P.J.; Bykov, D.

    2016-01-01

    Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the Boom Clay is considered as a potential host rock when designing a generic waste repository in the

  16. Radioactive waste disposal programme and siting regions for geological deep repositories. Executive summary. November 2008; Entsorgungsprogramm und Standortgebiete fuer geologische Tiefenlager. Zusammenfassung. November 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-11-15

    There are radioactive wastes in Switzerland. Since many decades they are produced by the operation of the five nuclear power plants, by medicine, industry and research. Important steps towards the disposal of these wastes are already realized; the corresponding activities are practised. This particularly concerns handling and packaging of the radioactive wastes, their characterization and inventory, as well as the interim storage and the inferred transportations. Preparatory works in the field of scientific research on deep geological repositories have allowed to acquire high level of technical and scientific expertise in that domain. The feasibility of building long-term safe geological repositories in Switzerland was demonstrated for all types of radioactive wastes; the demonstration was accepted by the Federal Council. There is enough knowledge to propose geological siting regions for further works. The financial funds already accumulated guaranty the financing of the dismantling of the power plants as well as building deep geological repositories for the radioactive wastes. The regulations already exist and the organisational arrangements necessary for the fruitful continuation of the works already done have been taken. The programme of the disposal of radioactive wastes also describes the next stages towards the timely realization of the deep repositories as well as the level of the financial needs. The programme is updated every five years, checked by the regulatory bodies and accepted by the Federal Council who reports to the parliament. The process of choosing a site, which will be completed in the next years, is detailed in the conceptual part of the programme for deep geological repositories. The NAGRA proposals are based exclusively on technical and scientific considerations; the global evaluation taking into account also political considerations has to be performed by the authorities and the Federal Council. The programme states that at the beginning of

  17. Workshop on Potentially Disruptive Phenomena for Nuclear Waste Repositories, July 27-28, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, J. J.

    1977-01-01

    The workshop on Potentially Disruptive Phenomena for Nuclear Waste Repositories brought together experts in the geosciences to identify and evaluate potentially disruptive events and processes and to contribute ideas on how to extrapolate data from the past into the next one million years. The analysis is to be used to model a repository in geologic media for long-term safety assessments of nuclear waste storage. The workshop included invited presentations on the following items: an overview of the Waste Isolation Safety Assessment Program (WISAP), simulation techniques, subjective probabilities and methodology of obtaining data, similar modeling efforts at Lawrence Livermore and Sandia Laboratories, and geologic processes or events.

  18. Natural geochemical analogues of the near field of high-level nuclear waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Apps, J.A. [Lawrence Berkeley Lab., CA (United States)

    1995-09-01

    United States practice has been to design high-level nuclear waste (HLW) geological repositories with waste densities sufficiently high that repository temperatures surrounding the waste will exceed 100{degrees}C and could reach 250{degrees}C. Basalt and devitrified vitroclastic tuff are among the host rocks considered for waste emplacement. Near-field repository thermal behavior and chemical alteration in such rocks is expected to be similar to that observed in many geothermal systems. Therefore, the predictive modeling required for performance assessment studies of the near field could be validated and calibrated using geothermal systems as natural analogues. Examples are given which demonstrate the need for refinement of the thermodynamic databases used in geochemical modeling of near-field natural analogues and the extent to which present models can predict conditions in geothermal fields.

  19. Natural analogues: studies of geological processes relevant to radioactive waste disposal in deep geological repositories

    Energy Technology Data Exchange (ETDEWEB)

    Russel, A.W. [Bedrock Geosciences, Auenstein (Switzerland); Reijonen, H.M. [Saanio and Rickkola Oy, Helsinki (Finland); McKinley, I.G. [MCM Consulting, Baden-Daettwil (Switzerland)

    2015-06-15

    The geological disposal of radioactive wastes is generally accepted to be the most practicable approach to handling the waste inventory built up from over 70 years accumulation of power production, research-medical-industrial and military wastes. Here, a brief overview of the approach to geological disposal is presented along with some information on repository design and the assessment of repository post-closure safety. One of the significant challenges for repository safety assessment is how to extrapolate the likely long-term (i.e. ten thousand to a million years) behaviour of the repository from the necessarily short term data from analytical laboratories and underground rock laboratories currently available. One approach, common to all fields of the geosciences, but also in such diverse fields as philosophy, biology, linguistics, law, etc., is to utilise the analogue argumentation methodology. For the specific case of radioactive waste management, the term 'natural analogue' has taken on a particular meaning associated with providing supporting arguments for a repository safety assessment. This approach is discussed here with a brief overview of how the study of natural (and, in particular, geological) systems can provide supporting information on the likely long-term evolution of a deep geological waste repository. The overall approach is discussed and some relevant examples are presented, including the use of uranium ore bodies to assess waste form stability, the investigation of native metals to define the longevity of waste containers and how natural clays can provide information on the stability of waste tunnel backfill material. (authors)

  20. Microbial corrosion of metallic materials in a deep nuclear-waste repository

    Directory of Open Access Journals (Sweden)

    Stoulil J.

    2016-06-01

    Full Text Available The study summarises current knowledge on microbial corrosion in a deep nuclear-waste repository. The first part evaluates the general impact of microbial activity on corrosion mechanisms. Especially, the impact of microbial metabolism on the environment and the impact of biofilms on the surface of structure materials were evaluated. The next part focuses on microbial corrosion in a deep nuclear-waste repository. The study aims to suggest the development of the repository environment and in that respect the viability of bacteria, depending on the probable conditions of the environment, such as humidity of bentonite, pressure in compact bentonite, the impact of ionizing radiation, etc. The last part is aimed at possible techniques for microbial corrosion mechanism monitoring in the conditions of a deep repository. Namely, electrochemical and microscopic techniques were discussed.

  1. Development of site suitability criteria for the high level waste repository for Lawrence Livermore Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-01

    Results of our mining, geological and geotechnical studies provided in support of the development of site suitability criteria for the high level waste repository are presented. The primary purpose of the work was the identification and development of appropriate geotechnical descriptors and coefficients required for the Site Suitability Repository Model. This model was developed by The Analytic Sciences Corporation (TASC) of Reading, Massachusetts and is not described in this report.

  2. Engineered barrier development for a nuclear waste repository in basalt: an integration of current knowledge

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.J.

    1980-05-01

    This document represents a compilation of data and interpretive studies conducted as part of the engineered barriers program of the Basalt Waste Isolation Project. The overall objective of these studies is to provide information on barrier system designs, emplacement and isolation techniques, and chemical reactions expected in a nuclear waste repository located in the basalts underlying the Hanford Site within the state of Washington. Backfills, waste-basalt interactions, sorption, borehole plugging, etc., are among the topics discussed.

  3. Integration of defense waste into the Civilian Repository Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-24

    The purpose of this audit was to determine whether the fee calculation method proposed by Waste Management would result in an accurate and fair allocation of costs to both civilian and defense owners of nuclear waste. We reviewed Waste Management`s proposed cost allocation plans to be used in calculating fees for defense waste disposal. We also evaluated Waste Management`s actions toward developing a defense waste fee payment schedule. Our examination was made in accordance with generally accepted government auditing standards which included tests of internal controls and compliance with laws and regulations to the extent necessary to satisfy the scope of the audit.

  4. NWTS program criteria for mined geologic disposal of nuclear waste: repository performance and development criteria. Public draft

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-07-01

    This document, DOE/NWTS-33(3) is one of a series of documents to establish the National Waste Terminal Storage (NWTS) program criteria for mined geologic disposal of high-level radioactive waste. For both repository performance and repository development it delineates the criteria for design performance, radiological safety, mining safety, long-term containment and isolation, operations, and decommissioning. The US Department of Energy will use these criteria to guide the development of repositories to assist in achieving performance and will reevaluate their use when the US Nuclear Regulatory Commission issues radioactive waste repository rules.

  5. Methods of calculating the post-closure performance of high-level waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Ross, B. (ed.)

    1989-02-01

    This report is intended as an overview of post-closure performance assessment methods for high-level radioactive waste repositories and is designed to give the reader a broad sense of the state of the art of this technology. As described here, ''the state of the art'' includes only what has been reported in report, journal, and conference proceedings literature through August 1987. There is a very large literature on the performance of high-level waste repositories. In order to make a review of this breadth manageable, its scope must be carefully defined. The essential principle followed is that only methods of calculating the long-term performance of waste repositories are described. The report is organized to reflect, in a generalized way, the logical order to steps that would be taken in a typical performance assessment. Chapter 2 describes ways of identifying scenarios and estimating their probabilities. Chapter 3 presents models used to determine the physical and chemical environment of a repository, including models of heat transfer, radiation, geochemistry, rock mechanics, brine migration, radiation effects on chemistry, and coupled processes. The next two chapters address the performance of specific barriers to release of radioactivity. Chapter 4 treats engineered barriers, including containers, waste forms, backfills around waste packages, shaft and borehole seals, and repository design features. Chapter 5 discusses natural barriers, including ground water systems and stability of salt formations. The final chapters address optics of general applicability to performance assessment models. Methods of sensitivity and uncertainty analysis are described in Chapter 6, and natural analogues of repositories are treated in Chapter 7. 473 refs., 19 figs., 2 tabs.

  6. Assessing microbiologically induced corrosion of waste package materials in the Yucca Mountain repository

    Energy Technology Data Exchange (ETDEWEB)

    Horn, J. M., LLNL

    1998-01-01

    The contribution of bacterial activities to corrosion of nuclear waste package materials must be determined to predict the adequacy of containment for a potential nuclear waste repository at Yucca Mountain (YM), NV. The program to evaluate potential microbially induced corrosion (MIC) of candidate waste container materials includes characterization of bacteria in the post-construction YM environment, determination of their required growth conditions and growth rates, quantitative assessment of the biochemical contribution to metal corrosion, and evaluation of overall MIC rates on candidate waste package materials.

  7. Debate heats up over potential Interim Nuclear Waste Repository, as studies of Yucca Mountain continue

    Science.gov (United States)

    Showstack, Randy

    With spent nuclear fuel piling up at power plants around the United States, and with a potential permanent nuclear waste repository at Nevada's Yucca Mountain not scheduled to accept waste until 11 years from now in the year 2010, the nuclear energy industry and many members of Congress have renewed their push to establish an interim repository at the adjacent Nevada Test Site of nuclear bombs.At a sometimes contentious March 12 hearing to consider the Nuclear Waste Policy Act of 1999 (House Resolution 45) that would require an interim facility to begin accepting waste in 2003, bill cosponsor Rep. Jim Barton (R-Tex.) told Energy Secretary Bill Richardson that he preferred that Congress and the Clinton Administration negotiate rather than fight over the measure.

  8. Risk management in the project of implantation of the repository for low and intermediate level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Borssatto, Maria de Fatima B.; Tello, Cledola Cassia O. de; Uemura, George, E-mail: tellocc@cdtn.br, E-mail: george@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG) Belo Horizonte, MG (Brazil)

    2011-07-01

    Project RBMN is part of the Brazilian solution for the storage of radioactive waste generated by the activities of nuclear energy in Brazil. The aim of RBMN is to implement the National Repository to dispose the low and intermediate-level radioactive waste. Risk is a characteristic of all projects, and it is originated from uncertainties, assumptions and the environment of execution of the project. Risk management is the way to monitor systematically these uncertainties and a guaranty that the goals of the project will be attained. A specific methodology for the risk management of the Project RBMN is under development, which integrates models and processes for identification and analysis of risks, reactions, monitoring, control and planning of risk management. This methodology is fundamental and will be of primordial importance for future generations who will be responsible for the operation at final stages, closure and institutional control during the post-closure of the repository. It will provide greater safety to executed processes and safeguarding risks and specific solutions for this enterprise, guaranteeing the safety of the repository in its life cycle, which has a foreseen duration of at least three hundred years. The aim of this paper is to present the preliminary analysis of the opportunities, threats, strong points and weak points identified up to now, that will provide support to implement risk management procedures. The methodology will be based on the PMBOK{sup R} - Project Management Board of Knowledge - and will take into consideration the best practices for project management.(author)

  9. Geochemical modeling of the nuclear-waste repository system. A status report

    Energy Technology Data Exchange (ETDEWEB)

    Deutsch, W.J.

    1980-12-01

    The primary objective of the geochemical modeling task is to develop an understanding of the waste-repository geochemical system and provide a valuable tool for estimating future states of that system. There currently exists a variety of computer codes which can be used in geochemical modeling studies. Some available codes contain the framework for simulating a natural chemical system and estimating, within limits, the response of that system to environmental changes. By data-base enhancement and code development, this modeling technique can be even more usefully applied to a nuclear-waste repository. In particular, thermodynamic data on elements not presently in the data base but identified as being of particular hazard in the waste-repository system, need to be incorporated into the code to estimate the near-field as well as the far-field reactions during a hypothetical breach. A reaction-path-simulation code, which estimates the products of specific rock/water reactions, has been tested using basalt and ground water. Results show that the mass-transfer capabilities of the code will be useful in chemical-evolution studies and scenario analyses. The purpose of this report is to explain the status of geochemical modeling as it currently applies to the chemical system of a hypothetical nuclear-waste repository in basalt and to present the plan proposed for further developmet and application.

  10. Performance-assessment comparisons for a repository containing LWR spent fuel or partitioned/transmutted nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, R.W. [Sandia National Lab., System Performance Assessment, Division 6312, Albuquerque, NM (US); Lee, W.W.L. [Univ. of California, Lawrence Berkeley Lab., Earth Sciences Div., Berkeley, CA (US)

    1992-11-01

    This paper describes one component of the total-system performance assessment analyses being performed for a potential geologic repository containing partitioned and/or transmuted waste. An analysis of the releases of radionuclides at the earth`s surface due to human intrusion is presented here. The results are compared with other total-system performance assessments for the potential Yucca Mountain repository containing light-water-reactor spent fuel. Although most of the releases from a repository containing partitioned/transmuted waste are lower than those from a repository containing conventional spent fuel, the maximum releases are not significantly different.

  11. Performance-assessment comparisons for a repository containing LWR spent fuel or partitioned/transmuted nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, R.W. (Sandia National Labs., Albuquerque, NM (United States)); Lee, W.W.L. (Lawrence Berkeley Lab., CA (United States))

    1992-01-01

    This paper describes one component of the total-system performance assessment analyses being performed for a potential geologic repository containing partitioned and/or transmuted waste. An analysis of the releases of radionuclides at the earth's surface due to human intrusion is presented here. The results are compared with other total-system performance assessments for the potential Yucca Mountain repository containing light-water-reactor spent fuel. Although most of the releases from a repository containing partitioned/transmuted waste are lower than those from a repository containing conventional spent fuel, the maximum releases are not significantly different.

  12. Performance-assessment comparisons for a repository containing LWR spent fuel or partitioned/transmuted nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, R.W. [Sandia National Labs., Albuquerque, NM (United States); Lee, W.W.L. [Lawrence Berkeley Lab., CA (United States)

    1992-01-01

    This paper describes one component of the total-system performance assessment analyses being performed for a potential geologic repository containing partitioned and/or transmuted waste. An analysis of the releases of radionuclides at the earth`s surface due to human intrusion is presented here. The results are compared with other total-system performance assessments for the potential Yucca Mountain repository containing light-water-reactor spent fuel. Although most of the releases from a repository containing partitioned/transmuted waste are lower than those from a repository containing conventional spent fuel, the maximum releases are not significantly different.

  13. Public acceptance for centralized storage and repositories of low-level waste session (Panel)

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, H.R.

    1995-12-31

    Participants from various parts of the world will provide a summary of their particular country`s approach to low-level waste management and the cost of public acceptance for low-level waste management facilities. Participants will discuss the number, geographic location, and type of low-level waste repositories and centralized storage facilities located in their countries. Each will discuss the amount, distribution, and duration of funds to gain public acceptance of these facilities. Participants will provide an estimated $/meter for centralized storage facilities and repositories. The panel will include a brief discussion about the ethical aspects of public acceptance costs, approaches for negotiating acceptance, and lessons learned in each country. The audience is invited to participate in the discussion.

  14. Scenario Analysis for the Safety Assessment of Nuclear Waste Repositories: A Critical Review.

    Science.gov (United States)

    Tosoni, Edoardo; Salo, Ahti; Zio, Enrico

    2017-09-05

    A major challenge in scenario analysis for the safety assessment of nuclear waste repositories pertains to the comprehensiveness of the set of scenarios selected for assessing the safety of the repository. Motivated by this challenge, we discuss the aspects of scenario analysis relevant to comprehensiveness. Specifically, we note that (1) it is necessary to make it clear why scenarios usually focus on a restricted set of features, events, and processes; (2) there is not yet consensus on the interpretation of comprehensiveness for guiding the generation of scenarios; and (3) there is a need for sound approaches to the treatment of epistemic uncertainties. © 2017 Society for Risk Analysis.

  15. Analysis of functional criteria for buffer material in a high-level waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Won Jin; Chun, Kwan Sik; Lee, Jae Owan; Kang, Mun Ja

    1997-11-01

    This study is intended to analyze the requirements of buffer material that is one of the major components of the engineered barriers in a high-level waste repository. Based on the results, it is intended to suggest the quantitative functional criteria that is necessary to establish the preliminary concept for the domestic geological repository. The criteria are composed of seven major items, such as hydraulic conductivity, retardation capacity, swelling potential and swelling pressure, thermal conductivity, longevity, organic carbon content, and mechanical properties. (author). 87 refs., 12 tabs., 3 figs.

  16. High level nuclear waste repository in salt: Sealing systems status and planning report: Draft report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1985-09-01

    This report documents the initial conceptual design studies for a repository sealing system for a high-level nuclear waste repository in salt. The first step in the initial design studies was to review the current design level, termed schematic designs. This review identified practicality of construction and development of a design methodology as two key issues for the conceptual design. These two issues were then investigated during the initial design studies for seal system materials, seal placement, backfill emplacement, and a testing and monitoring plan. The results of these studies have been used to develop a program plan for completion of the sealing system conceptual design. 60 refs., 26 figs., 18 tabs.

  17. Review of geochemical measurement techniques for a nuclear waste repository in bedded salt

    Energy Technology Data Exchange (ETDEWEB)

    Knauss, K.G.; Steinborn, T.L.

    1980-05-22

    A broad, general review is presented of geochemical measurement techniques that can provide data necessary for site selection and repository effectiveness assessment for a radioactive waste repository in bedded salt. The available measurement techniques are organized according to the parameter measured. The list of geochemical parameters include all those measurable geochemical properties of a sample whole values determine the geochemical characteristics or behavior of the system. For each technique, remarks are made pertaining to the operating principles of the measurement instrument and the purpose for which the technique is used. Attention is drawn to areas where further research and development are needed.

  18. Coupling of Nuclear Waste Form Corrosion and Radionuclide Transports in Presence of Relevant Repository Sediments

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Nathalie A. [Washington State Univ., Pullman, WA (United States); Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ryan, Joseph V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-09-30

    Assessments of waste form and disposal options start with the degradation of the waste forms and consequent mobilization of radionuclides. Long-term static tests, single-pass flow-through tests, and the pressurized unsaturated flow test are often employed to study the durability of potential waste forms and to help create models that predict their durability throughout the lifespan of the disposal site. These tests involve the corrosion of the material in the presence of various leachants, with different experimental designs yielding desired information about the behavior of the material. Though these tests have proved instrumental in elucidating various mechanisms responsible for material corrosion, the chemical environment to which the material is subject is often not representative of a potential radioactive waste repository where factors such as pH and leachant composition will be controlled by the near-field environment. Near-field materials include, but are not limited to, the original engineered barriers, their resulting corrosion products, backfill materials, and the natural host rock. For an accurate performance assessment of a nuclear waste repository, realistic waste corrosion experimental data ought to be modeled to allow for a better understanding of waste form corrosion mechanisms and the effect of immediate geochemical environment on these mechanisms. Additionally, the migration of radionuclides in the resulting chemical environment during and after waste form corrosion must be quantified and mechanisms responsible for migrations understood. The goal of this research was to understand the mechanisms responsible for waste form corrosion in the presence of relevant repository sediments to allow for accurate radionuclide migration quantifications. The rationale for this work is that a better understanding of waste form corrosion in relevant systems will enable increased reliance on waste form performance in repository environments and potentially

  19. Backfill composition for secondary barriers in nuclear waste repositories

    Science.gov (United States)

    Beall, G.W.; Allard, B.M.

    1980-05-30

    A backfill composition for sorbing and retaining hazardous elements of nuclear wastes comprises 50 to 70% by weight of quartz, 10 to 30% by weight of montmorillonite, 1 to 10% by weight of phosphate mineral, 1 to 10% by weight of ferrous mineral, 1 to 10% by weight of sulfate mineral and 1 to 10% by weight of attapulgite.

  20. Health Cost of a Nuclear Waste Repository, WIPP

    Science.gov (United States)

    Kula, Erhun

    1996-01-01

    The Waste Isolation Pilot Plant (WIPP), the United States of America’s first nuclear waste dumping site, has over the years generated a great deal of concern and controversy. The most sensitive aspect of this project is that it may impose serious health risks on future generations. The first leg of this project is about to be completed and at the time of writing the Department of Energy is planning to perform experiments with a small quantity of waste for operational demonstrations. If everything goes well, then towards the end of this decade large quantities of wastes will be transported to the site for disposal. This article reconsiders the health cost of this project from an economic perspective in light of recent developments in the field of social discounting. As in earlier studies, two cases of health risks are considered: total cancer and genetic deformity over a one million year cutoff period. The analysis shows that whereas ordinary discounting method wipes out the future health detriments, expressed in monetary terms, the modified discounting criterion retains a substantial proportion of such costs in economic analysis.

  1. Evaluation of salt beds in New Mexico as a geologic repository for nuclear waste. [Waste Isolation Pilot Plant (WIPP)

    Energy Technology Data Exchange (ETDEWEB)

    Weart, W.D.

    1978-10-01

    The Department of Energy is proposing to demonstrate the acceptability of geologic disposal of radioactive waste by locating a Waste Isolation Pilot Plant (WIPP) in the salt beds 26 miles east of Carlsbad, New Mexico. The WIPP will serve as a permanent repository for defense generated transuranic contaminated waste and will also be used as a facility in which experiments and demonstrations with all radioactive waste types can be conducted. Rock salt has been the leading candidate for geologic disposal of nuclear waste since the National Academy of Science recommended in 1957 that salt for repositories receive further evaluation. Subsequent studies have failed to reveal any phenoomena which would disqualify salt beds as a repository medium. The present area being proposed for the WIPP is the second such location in the Delaware Basin for which new site data have been devloped; the first site proved geologically unacceptable. Ecologic and socioeconomic aspects have been investigated and extensive geophysical, geologic and hydrologic studies have been conducted to allow an evaluation of site acceptability. This paper will deal principally with the geotechnical aspects of site characterization. These studies are now sufficiently complete that the site can be recommended for further development of the WIPP. 10 figures.

  2. Performance analysis for waste repositories in the nordic countries. Report for project AFA-1.2

    Energy Technology Data Exchange (ETDEWEB)

    Vuori, S. [VTT Energy (Finland); Broden, K. [Studsvik RadWaste AB (Sweden); Carugati, S.; Brodersen, K. [Forskningscenter Risoe (Denmark); Walderhaug, T. [Icelandic Radiation Protection Institute (Iceland); Helgason, J. [Ekra Geological Consulting (Iceland); Sneve, M.; Hornkjoel, S. [Norwegian Radiation Protection (Norway); Backe, S. [IFE (Norway)

    1997-02-01

    The Nordic Nuclear Safety Research (NKS) project (AFA-1) focused on safety in the final disposal of long-lived low and medium level radioactive waste and its sub project (AFA-1.2), where this report has been produced, is dealing with the performance analysis of the engineered barrier system (near-field) of the repositories for low-and medium level wastes. The topic intentionally excludes the discussion of the characteristics of the geological host medium. Therefore a more generic discussion of the features of performance analysis is possible independent of the fact that different host media are considered in the Nordic countries. The different waste management systems existing and planned in the Nordic countries are shortly described in the report. In the report main emphasis is paid on the general repositories. Some of the phenomena and interactions relevant for a generic type of repository are discussed as well. Among the different approaches for the development of scenarios for safety and performance analyses one particular method - the Rock Engineering System (RES) - was chosen to be demonstratively tested in a brainstorming session, where the possible interactions and their safety significance were discussed employing a simplified and generic Nordic repository system as the reference system. As an overall impression, the AFA-project group concludes that the use of the RES approach is very easy to learn even during a short discussion session. The use of different ways to indicate the safety significance of various interactions in a graphical user interface increases the clarity. Within the project a simple software application was developed employing a generally available spread sheet programme. The developed tool allows an easy opportunity to link the cell specific comments readily available for the `reader` of the obtained results. A short review of the performance analyses carried out in the Nordic countries for actual projects concerning repositories for

  3. Decision-Making Risks Concerning the Construction of the Goiania Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Paschoa, A.S. [Pontificia Univ. Catolica, Rio de Janeiro (Brazil); Rozental, J.J. [Ministry of Environment (Israel); Tranjan Filho, A. [Comissao Nacional de Energia Nuclear (CNEN) (Brazil)

    2001-07-01

    As it is well known, an accident with a teletherapy source made of {sup 137}CsCl with an initial activity of 59 TBq occurred in Goiania, in September of 1987. This paper will discuss the decision-making process, and the struggle that followed the decision to build the final repository for the remnants of the Goiania accident. The Goiania final repository was built as planned. The two subsurface structures under the grassy artificial hills hold the overall volume of the remnants of the Goiania accident. The near hill holds 5x10{sup 3} m3 of stabilized wastes without radioactivity, or with very low radioactivity. The far hill holds the remaining 6.5x10{sup 3} m{sup 3} of stabilized wastes with low and medium radioactivity. The central part of each subsurface hill has been shielded by wastes with less and less radioactivity. The overall fenced area occupies 1.85x10{sup 5} m{sup 2}. The external radiation levels are similar to the surrounding background, and much lower than those found in the Brazilian areas of high natural radioactivity. The site is permanently monitored by independent institutions, including Brazilian universities, and national and international organizations. As it was mentioned earlier, the final repository was build to last for at least 400 years. Although the initial decision to adopt a too conservative decontamination criterion in the case of the Goiania accident was bound to produce excessive amount of waste; such decision proved, retrospectively, not to be bad because the excess low radioactive waste produced was used as extra shielding material in final repository. The technical decision-maker should not abandon risk estimates, but should be aware that credibility is the main basis to achieve acceptability of a decision by the general public. Risk perception should be regarded as only a first step towards what may be called knowledge, or comprehension of risk estimates, but risk perception by the general public is still an open issue. The

  4. Workshop on development of radionuclide getters for the Yucca Mountain waste repository: proceedings.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Robert Charles; Lukens, Wayne W. (Lawrence Berkeley National Laboratory)

    2006-03-01

    The proposed Yucca Mountain repository, located in southern Nevada, is to be the first facility for permanent disposal of spent reactor fuel and high-level radioactive waste in the United States. Total Systems Performance Assessment (TSPA) analysis has indicated that among the major radionuclides contributing to dose are technetium, iodine, and neptunium, all of which are highly mobile in the environment. Containment of these radionuclides within the repository is a priority for the Yucca Mountain Project (YMP). These proceedings review current research and technology efforts for sequestration of the radionuclides with a focus on technetium, iodine, and neptunium. This workshop also covered issues concerning the Yucca Mountain environment and getter characteristics required for potential placement into the repository.

  5. Khazar Iodine Production Plant Site Remediation in Turkmenistan. NORM Contaminated Waste Repository Establishment - 12398

    Energy Technology Data Exchange (ETDEWEB)

    Gelbutovskiy, Alexander B.; Cheremisin, Peter I.; Troshev, Alexander V.; Egorov, Alexander J.; Boriskin, Mikhail M.; Bogod, Mikhail A. [JSC ' ECOMET-S' , Sosnoviy Bor, Leningrad region, 188540 (Russian Federation)

    2012-07-01

    Radiation safety provisions for NORM contaminated areas are in use in a number of the former Soviet republics. Some of these areas were formed by absorbed radionuclides at the iodine and bromine extraction sites. As a rule, there are not any plant radiation monitoring systems nor appropriate services to ensure personnel, population and environmental radiation safety. The most hazardous sites are those which are situated in the Caspian Sea coastal zone. The bulk of the accumulated waste is represented by a loose mixture of sand and charcoal, which was basically used as the iodine extraction sorbent. The amounts of these wastes were estimated to be approximately 20,000 metric tons. The waste contamination is mainly composed of Ra-226 (U-238 decay series) and Ra-224, Ra-228 (Th-232 decay series). In 2009, the 'ECOMET-S', a Closed Joint-Stock Company from St. Petersburg, Russian Federation, was authorized by the Turkmenistan government to launch the rehabilitation project. The project includes D and D activities, contaminated areas remediation, collected wastes safe transportation to the repository and its disposal following repository closure. The work at the Khazar chemical plant started in September, 2010. Comprehensive radiological surveys to estimate the waste quantities were carried out in advance. In course of the rehabilitation work at the site of the Khazar chemical plant additional waste quantities (5,000 MT, 10,000 m{sup 3}) were discovered after the sludge was dumped and drained. Disposal volumes for this waste was not provided initially. The additional volume of the construction wastes was required in order to accommodate all the waste to be disposed. For the larger disposal volume the project design enterprise VNIPIET, offered to erect a second wall outside the existing one and this solution was adopted. As of May, 2011, 40,575 m{sup 3} of contaminated waste were collected and disposed safely. This volume represents 96.6% of the initial

  6. 3D numerical modelling of the thermal state of deep geological nuclear waste repositories

    Science.gov (United States)

    Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, Yu. N.

    2017-09-01

    One of the important aspects of the high-level radioactive waste (HLW) disposal in deep geological repositories is ensuring the integrity of the engineered barriers which is, among other phenomena, considerably influenced by the thermal loads. As the HLW produce significant amount of heat, the design of the repository should maintain the balance between the cost-effectiveness of the construction and the sufficiency of the safety margins, including those imposed on the thermal conditions of the barriers. The 3D finite-element computer code FENIA was developed as a tool for simulation of thermal processes in deep geological repositories. Further the models for mechanical phenomena and groundwater hydraulics will be added resulting in a fully coupled thermo-hydro-mechanical (THM) solution. The long-term simulations of the thermal state were performed for two possible layouts of the repository. One was based on the proposed project of Russian repository, and another features larger HLW amount within the same space. The obtained results describe the spatial and temporal evolution of the temperature filed inside the repository and in the surrounding rock for 3500 years. These results show that practically all generated heat was ultimately absorbed by the host rock without any significant temperature increase. Still in the short time span even in case of smaller amount of the HLW the temperature maximum exceeds 100 °C, and for larger amount of the HLW the local temperature remains above 100 °C for considerable time. Thus, the substantiation of the long-term stability of the repository would require an extensive study of the materials properties and behaviour in order to remove the excessive conservatism from the simulations and to reduce the uncertainty of the input data.

  7. Low-level waste feed staging plan

    Energy Technology Data Exchange (ETDEWEB)

    Certa, P.J.; Grams, W.H.; McConville, C.M.; L. W. Shelton, L.W.; Slaathaug, E.J., Westinghouse Hanford

    1996-08-12

    The `Preliminary Low-Level Waste Feed Staging Plan` was updated to reflect the latest requirement in the Tank Waste Remediation Privatization Request for Proposals (RFP) and amendments. The updated plan develops the sequence and transfer schedule for retrieval of DST supernate by the management and integration contractor and delivery of the staged supernate to the private low-activity waste contractors for treatment. Two DSTs are allocated as intermediate staging tanks. A transfer system conflict analysis provides part of the basis for determining transfer system upgrade requirements to support both low-activity and high-level waste feed delivery. The intermediate staging tank architecture and retrieval system equipment are provided as a planning basis until design requirements documents are prepared. The actions needed to successfully implement the plan are identified. These include resolution of safety issues and changes to the feed envelope limits, minimum order quantities, and desired batch sizes.

  8. Materials Degradation Issues in the U.S. High-Level Nuclear Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    K.G. Mon; F. Hua

    2005-04-12

    This paper reviews the state-of-the-art understanding of the degradation processes by the Yucca Mountain Project (YMP) with focus on interaction between the in-drift environmental conditions and long-term materials degradation of waste packages and drip shields within the repository system during the first 10,000-years after repository closure. This paper provides an overview of the degradation of the waste packages and drip shields in the repository after permanent closure of the facility. The degradation modes discussed in this paper include aging and phase instability, dry oxidation, general and localized corrosion, stress corrosion cracking, and hydrogen induced cracking of Alloy 22 and titanium alloys. The effects of microbial activity and radiation on the degradation of Alloy 22 and titanium alloys are also discussed. Further, for titanium alloys, the effects of fluorides, bromides, and galvanic coupling to less noble metals are considered. It is concluded that the materials and design adopted will provide sufficient safety margins for at least 10,000-years after repository closure.

  9. Radionuclide transport from near-surface repository for radioactive waste - The unsaturated zone approach

    Energy Technology Data Exchange (ETDEWEB)

    Jakimaviciute-Maseliene, V. [Vilnius University (Lithuania); Mazeika, J. [Nature Research Centre (Lithuania); Motiejunas, S. [Radioactive Waste Management Agency (Lithuania)

    2014-07-01

    About 100 000 m{sup 3} of solid conditioned Low and Intermediate Level Waste (LILW), generated during operation and decommissioning of the Ignalina nuclear power plant (INPP), are to be disposed of in a near-surface repository (NSR) - a 'hill'-type repository with reinforced concrete vaults and with engineered and natural barriers. The northeastern Lithuania and the environment of the INPP in particular were recognized as the areas most suitable for a near-surface repository (Stabatiske Site). The engineered barriers of the repository consist of concrete cells surrounded by clay-based material of low permeability with about the same isolating capacity in all directions. The clay materials must be effectively compactable so that required hydraulic conductivity is reached. The Lithuanian Triassic clay turned out to be sufficiently rich in smectites and was proposed as main candidate for sealing of the repository. When the concrete vaults are filled, the repository cover will be constructed. The surface of the mound will be planted with grass. In this study a computer code FEFLOW 5.0 was applied for simulating the transport of the most mobile radionuclides ({sup 3}H, {sup 14}C, {sup 59}Ni and {sup 94}Nb) with moisture through an unsaturated vault of the near-surface repository in Stabatiske Site. The HYDRUS-1D analysis was used to assess the radionuclide transport in the repository and to estimate initial activity concentrations of radionuclides transported from the cemented waste matrix. Radionuclide release from the vault in the unsaturated conditions after closure of the repository and consequent contaminant plume transport has been assessed taking into account site-specific natural and engineering conditions and based on a normal evolution scenario. The highest peak radionuclide activity concentrations were estimated applying the FEFLOW code. The highest value of {sup 14}C activity concentration(about 1.3x10{sup 8} Bq/m{sup 3}) at the groundwater table

  10. Topographical survey and soil characterization of a candidate site for Radioactive Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Peconick, Diva Godoi de O.; Mourao, Rogerio P., E-mail: godiva@cdtn.br, E-mail: mouraor@cdtn.br [Centro de Desenvolvimento da Tecnologia Nucelar (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    Brazil has already initiated the establishment of a national near-surface repository for the low- and intermediate short-lived radioactive wastes generated within its territory. With two nuclear power plants in operation and a third one under construction, five active nuclear research institutes and another one planned for the intermediate future, operational constraints and social pressure built up for a disposal solution for such a waste category. The Brazilian Nuclear Commission CNEN was tasked at designing, building and commissioning this repository, which implies, among other activities, finding a suitable place for the facility. After an initial technical desk job, a federal land, not far from the NPPs, was appointed and in situ studies for the site characterization were started. This paper describes the topographical survey and soil drilling campaign carried out for the initial evaluation of the feasibility of the site vis-a-vis the applicable national regulations for site selection and disposal facilities licensing. (author)

  11. Physico-chemical interactions at the concrete-bitumen interface of nuclear waste repositories

    OpenAIRE

    Sablayrolles C.; Escadeillas G.; Erable B.; Jacquemet N.; Ranaivomanana H.; Bertron A.; Albrecht A.

    2013-01-01

    International audience; This study investigates the fate of nitrate and organic acids at the bitumenconcrete-steel interface within a repository storage cell for long-lived, intermediatelevel, radioactive wastes. The interface was simulated by a multiphase system in which cementitious matrices (CEM V paste specimens) were exposed to bitumen model leachates consisting of nitrates and acetic acid with and without oxalic acid, chemical compounds likely to be released by bitumen. Leaching experim...

  12. Deep repository for long-lived low- and intermediate-level waste. Preliminary safety assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    A preliminary safety assessment has been performed of a deep repository for long-lived low- and intermediate-level waste, SFL 3-5. The purpose of the study is to investigate the capacity of the facility to act as a barrier to the release of radionuclides and toxic pollutants, and to shed light on the importance of the location of the repository site. A safety assessment (SR 97) of a deep repository for spent fuel has been carried out at the same time. In SR 97, three hypothetical repository sites have been selected for study. These sites exhibit fairly different conditions in terms of hydrogeology, hydrochemistry and ecosystems. To make use of information and data from the SR 97 study, we have assumed that SFL 3-5 is co-sited with the deep repository for spent fuel. A conceivable alternative is to site SFL 3-5 as a completely separate repository. The focus of the SFL 3-5 study is a quantitative analysis of the environmental impact for a reference scenario, while other scenarios are discussed and analyzed in more general terms. Migration in the repository's near- and far-field has been taken into account in the reference scenario. Environmental impact on the three sites has also been calculated. The calculations are based on an updated forecast of the waste to be disposed of in SFL 3-5. The forecast includes radionuclide content, toxic metals and other substances that have a bearing on a safety assessment. The safety assessment shows how important the site is for safety. Two factors stand out as being particularly important: the water flow at the depth in the rock where the repository is built, and the ecosystem in the areas on the ground surface where releases may take place in the future. Another conclusion is that radionuclides that are highly mobile and long-lived, such as {sup 36}Cl and {sup 93}Mo , are important to take into consideration. Their being long-lived means that barriers and the ecosystems must be regarded with a very long time horizon.

  13. Performance Assessment of a Generic Repository in Bedded Salt for DOE-Managed Nuclear Waste

    Science.gov (United States)

    Stein, E. R.; Sevougian, S. D.; Hammond, G. E.; Frederick, J. M.; Mariner, P. E.

    2016-12-01

    A mined repository in salt is one of the concepts under consideration for disposal of DOE-managed defense-related spent nuclear fuel (SNF) and high level waste (HLW). Bedded salt is a favorable medium for disposal of nuclear waste due to its low permeability, high thermal conductivity, and ability to self-heal. Sandia's Generic Disposal System Analysis framework is used to assess the ability of a generic repository in bedded salt to isolate radionuclides from the biosphere. The performance assessment considers multiple waste types of varying thermal load and radionuclide inventory, the engineered barrier system comprising the waste packages, backfill, and emplacement drifts, and the natural barrier system formed by a bedded salt deposit and the overlying sedimentary sequence (including an aquifer). The model simulates disposal of nearly the entire inventory of DOE-managed, defense-related SNF (excluding Naval SNF) and HLW in a half-symmetry domain containing approximately 6 million grid cells. Grid refinement captures the detail of 25,200 individual waste packages in 180 disposal panels, associated access halls, and 4 shafts connecting the land surface to the repository. Equations describing coupled heat and fluid flow and reactive transport are solved numerically with PFLOTRAN, a massively parallel flow and transport code. Simulated processes include heat conduction and convection, waste package failure, waste form dissolution, radioactive decay and ingrowth, sorption, solubility limits, advection, dispersion, and diffusion. Simulations are run to 1 million years, and radionuclide concentrations are observed within an aquifer at a point approximately 4 kilometers downgradient of the repository. The software package DAKOTA is used to sample likely ranges of input parameters including waste form dissolution rates and properties of engineered and natural materials in order to quantify uncertainty in predicted concentrations and sensitivity to input parameters. Sandia

  14. Repository performance assessment of waste forms from the electrometallurgical treatment of sodium-bonded spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Morris, E. E.; Fanning, T. H.; Feldman, E. E.; Petri, M. C.

    2000-03-20

    The ceramic and metal waste forms produced by electrometallurgical treatment of sodium-bonded spent nuclear fuel are undergoing evaluation as to how they will perform within the geologic repository which is proposed to be built at Yucca Mountain. An initial assessment, making use of preliminary degradation models for the waste forms, is described. The analyses are performed with a simplified version of the Total System Performance Assessment--Viability Assessment repository model. Results indicate that the ability of the ceramic and metal waste forms to retain radionuclides is similar to and sometimes better than defense high-level waste glass.

  15. Albedo Neutron Dosimetry in a Deep Geological Disposal Repository for High-Level Nuclear Waste.

    Science.gov (United States)

    Pang, Bo; Becker, Frank

    2017-04-28

    Albedo neutron dosemeter is the German official personal neutron dosemeter in mixed radiation fields where neutrons contribute to personal dose. In deep geological repositories for high-level nuclear waste, where neutrons can dominate the radiation field, it is of interest to investigate the performance of albedo neutron dosemeter in such facilities. In this study, the deep geological repository is represented by a shielding cask loaded with spent nuclear fuel placed inside a rock salt emplacement drift. Due to the backscattering of neutrons in the drift, issues concerning calibration of the dosemeter arise. Field-specific calibration of the albedo neutron dosemeter was hence performed with Monte Carlo simulations. In order to assess the applicability of the albedo neutron dosemeter in a deep geological repository over a long time scale, spent nuclear fuel with different ages of 50, 100 and 500 years were investigated. It was found out, that the neutron radiation field in a deep geological repository can be assigned to the application area 'N1' of the albedo neutron dosemeter, which is typical in reactors and accelerators with heavy shielding. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  16. Integrated management data system for radioactive waste repositories (SGI3R) - development of the inventory module

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fabio; Tello, Cledola Cassia O. de, E-mail: silvaf@cdtn.br, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    In Brazil, CNEN is responsible for the intermediate and final storage of radioactive waste generated in the country. The CDTN/CNEN coordinates the RBMN Project for the implementation of the National Repository for disposal radioactive waste of low- and intermediate-level. The results of this Project should be presented so that all data being easily retrievable and useful for all institutions involved, including the regulators. To achieve this goal it was developed at the Waste Management Department - SEGRE/CDTN - a management database system, called 'Integrated Management System for the Management of Repository for Radioactive Waste' (SGI3R). The System consists of relational tables, forms and reports, preserving all available information, avoiding duplication of efforts, additional costs, and it will additionally give support to improve the management of RBMN Project. This paper presents a summary of this development with emphasis on the INVENTORY Module. The data from the inventory of disused sealed sources, which are stored in CDTN, were used to test the functionality of this module and of the SGI3R. These sources were categorized according to guidelines of the IAEA, and it was also presented how they should be safely managed over time. (author)

  17. STAGE OF TEXTILE RECYCLE WASTE IN ROMANIA

    Directory of Open Access Journals (Sweden)

    TRIPA Simona

    2014-05-01

    Full Text Available Aim of this article is to examine the stage of textile recycle waste in Romania. For this purpose were analyzed the main sources of textile waste from Romania (industry of manufacture of textiles, wearing apparel, leather and related products, imports of textiles, clothing and footwear and imports of second hand clothing and also evolution of the quantity of textile waste in Romania. The benefits (economic and environmental of the collection and recycling of waste and the legislation on the waste management, have determined the diversification and increasing the number and the capacity of recovery and disposal of waste in Romania. We found the most textile waste in Romania was deposited in deposits onto or into land, in the proportion of 18.51%. This proportion is under the EU average of 34.03%, but is much higher than in other European country. Also, has been an increase in the number of incinerators, in the last years. With all of this, the interest in textile waste management in Romania is far from being to the level of European, where are associations who dealing with the collection and recycling of textiles and is achieved a selective collection of textile waste in the points especially designed for this thing. The information for this paper was gathered from literature, from the EUROSTAT database and INSSE database analysis and by Internet.

  18. Reducing the likelihood of future human activities that could affect geologic high-level waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    1984-05-01

    The disposal of radioactive wastes in deep geologic formations provides a means of isolating the waste from people until the radioactivity has decayed to safe levels. However, isolating people from the wastes is a different problem, since we do not know what the future condition of society will be. The Human Interference Task Force was convened by the US Department of Energy to determine whether reasonable means exist (or could be developed) to reduce the likelihood of future human unintentionally intruding on radioactive waste isolation systems. The task force concluded that significant reductions in the likelihood of human interference could be achieved, for perhaps thousands of years into the future, if appropriate steps are taken to communicate the existence of the repository. Consequently, for two years the task force directed most of its study toward the area of long-term communication. Methods are discussed for achieving long-term communication by using permanent markers and widely disseminated records, with various steps taken to provide multiple levels of protection against loss, destruction, and major language/societal changes. Also developed is the concept of a universal symbol to denote Caution - Biohazardous Waste Buried Here. If used for the thousands of non-radioactive biohazardous waste sites in this country alone, a symbol could transcend generations and language changes, thereby vastly improving the likelihood of successful isolation of all buried biohazardous wastes.

  19. Recharge-area nuclear waste repository in southeastern Sweden. Demonstration of hydrogeologic siting concepts and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Provost, A.M.; Voss, C.I. [U.S. Geological Survey, Reston, VA (United States)

    2001-11-01

    Nuclear waste repositories located in regional ground-water recharge ('upstream') areas may provide the safety advantage that potentially released radionuclides would have long travel time and path length, and large path volume, within the bedrock before reaching the biosphere. Nuclear waste repositories located in ground-water discharge ('downstream') areas likely have much shorter travel time and path length and smaller path volume. Because most coastal areas are near the primary discharge areas for regional ground-water flow, coastal repositories may have a lower hydrogeologic safety margin than 'upstream' repositories located inland. Advantageous recharge-area sites may be located through careful use of regional three-dimensional, variable-density, ground-water modeling. Because of normal limitations of site-characterization programs in heterogeneous bedrock environments, the hydrogeologic structure and properties of the bedrock will generally remain unknown at the spatial scales required for the model analysis, and a number of alternative bedrock descriptions are equally likely. Model simulations need to be carried out for the full range of possible descriptions. The favorable sites are those that perform well for all of the modeled bedrock descriptions. Structural heterogeneities in the bedrock and local undulations in water-table topography, at a scale finer than considered by a given model, also may cause some locations in favored inland areas to have very short flow paths (of only hundreds of meters) and short travel times, compromising the long times and paths (of many kilometers) predicted by the analysis for these sites. However, in the absence of more detailed modeling, the favored upstream sites offer a greater chance of achieving long times and paths than do downstream discharge areas, where times and paths are expected to be short regardless of the level of detail included in the model. As an example of this siting

  20. Sample performance assessment of a high-level radioactive waste repository: sensitivity analysis

    Energy Technology Data Exchange (ETDEWEB)

    Tkaczyk, A. [Iowa State Univ. of Science and Technology, Ames, IA (United States). Dept. of Mechanical Engineering

    2001-07-01

    The Yucca Mountain Project (YMP) is the USA's first attempt at long-term storage of High-Level Radioactive Waste (HLW). In theory, the reasoning for such a repository seems sound. In practice, there are many scenarios and cases to be considered while putting such a project into effect. Since a goal of YMP is to minimize dangers associated with long-term storage of HLW, it is important to estimate the dose rate to which current and future generations will be subjected. The lifetime of the repository is simulated to indicate the radiation dose rate to the maximally exposed individual; it is assumed that if the maximally exposed individual would not be harmed by the annual dose, the remaining population will be at even smaller risk. The determination of what levels of exposure can be deemed harmless is a concern, and the results from the simulations as compared against various regulations are discussed. (author)

  1. The Microbiology of Subsurface, Salt-Based Nuclear Waste Repositories: Using Microbial Ecology, Bioenergetics, and Projected Conditions to Help Predict Microbial Effects on Repository Performance

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, Juliet S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cherkouk, Andrea [Helmholtz-Zentrum Dresden-Rossendorf, Rossendorf (Germany); Arnold, Thuro [Helmholtz-Zentrum Dresden-Rossendorf, Rossendorf (Germany); Meleshyn, Artur [Gesellschaft fur Anlagen und Reaktorsicherheit, Braunschweig (Germany); Reed, Donald T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-11-17

    This report summarizes the potential role of microorganisms in salt-based nuclear waste repositories using available information on the microbial ecology of hypersaline environments, the bioenergetics of survival under high ionic strength conditions, and “repository microbiology” related studies. In areas where microbial activity is in question, there may be a need to shift the research focus toward feasibility studies rather than studies that generate actual input for performance assessments. In areas where activity is not necessary to affect performance (e.g., biocolloid transport), repository-relevant data should be generated. Both approaches will lend a realistic perspective to a safety case/performance scenario that will most likely underscore the conservative value of that case.

  2. Characterization of Discharge Areas of Radionuclides Originating From Nuclear Waste Repositories

    Science.gov (United States)

    Marklund, L.; Xu, S.; Worman, A.

    2009-05-01

    If leakages in nuclear waste repositories located in crystalline bedrock arise, radionuclides will reach the biosphere and cause a risk of radiological impact. The extent of the radiological impact depends on in which landscape elements the radionuclides emerge. In this study, we investigate if there are certain landscape elements that generally will act as discharge areas for radionuclides leaking from subsurface deposits. We also characterize the typical properties that distinguish these areas from others. In humid regions, landscape topography is the most important driving force for groundwater flow. Because groundwater is the main transporting agent for migrating radionuclides, the topography will determine the flowpaths of leaking radionuclides. How topography and heterogeneities in the subsurface affect the discharge distribution of the radionuclides is therefore an important scope of this study. To address these issues, we developed a 3-D transport model. Our analyses are based on site-specific data from two different areas in Sweden, Forsmark, Uppland, and Oskarshamn, Småland. The Swedish Nuclear Waste Management Company (SKB) has selected these two areas as candidate areas for a deep repository of nuclear waste and the areas are currently subject to site investigations. Our results suggest that there are hot-spots in the landscape i.e. areas with high probability of receiving large amounts of radionuclides from a leaking repository of nuclear waste. The hot-spots concentrate in the sea, streams, lakes and wetlands. All these elements are found at lower elevations in the landscape. This pattern is mostly determined by the landscape topography and the locations of fracture zones. There is a relationship between fracture zones and topography, and therefore the importance of the topography for the discharge area distribution is not contradicted by the heterogeneity in the bedrock. The varieties of landscape elements which have potential for receiving

  3. Attitudes and opposition in siting a high level nuclear waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Sjoeberg, L.; Viklund, M.; Truedsson, J

    1998-09-01

    In Sweden, the Swedish Nuclear Fuel and Waste Management Company (SKB) handles all issues concerning nuclear waste, including the siting process, in which the final outcome is intended to be a repository for high level nuclear waste placed deep down in bedrock. The main objective of the siting process is to find a host community fulfilling two important conditions: the safety demands have been met and agreements with the municipality can be accomplished. Only in such municipalities, so-called feasibility studies will be conducted. After conducting general studies in the whole country, SKB, in October 1992, sent letters with information about the intended feasibility studies to all Swedish municipalities. As a result, feasibility studies are or have been considered - and in some cases also been conducted - in eleven Swedish municipalities up until 1998. These are the municipalities where the attitudes and opposition towards a feasibility study, and possibly a final repository, are studied. The discussion can be divided into three main parts: Management of the siting process; Inherent `chaotic` processes and/or factors and risk perception. It is argued that two important problems could have been avoided at least partly: The citizens in many municipalities were uncertain of the relationship between a feasibility study and a final repository, and in many municipalities the citizens were afraid that the Government could overrule the municipal veto. Because of these fears, a common argument among the opponents of a feasibility study was: `to be sure of not receiving a final repository, we say no to a feasibility study`. Some inherent factors, more or less prevalent in the municipalities as well as in society in general, may also partly explain the outcome of the siting process. The municipalities in which the debate has been heated, and where public support has been more difficult to reach, share some common characteristics. Esp. in the municipalities in the north of

  4. Attenuation of elastic waves in bentonite and monitoring of radioactive waste repositories

    Science.gov (United States)

    Biryukov, A.; Tisato, N.; Grasselli, G.

    2016-04-01

    Deep geological repositories, isolated from the geosphere by an engineered bentonite barrier, are currently considered the safest solution for high-level radioactive waste (HLRW) disposal. As the physical conditions and properties of the bentonite barrier are anticipated to change with time, seismic tomography was suggested as a viable technique to monitor the physical state and integrity of the barrier and to timely detect any unforeseen failure. To do so, the seismic monitoring system needs to be optimized, and this can be achieved by conducting numerical simulations of wave propagation in the repository geometry. Previous studies treated bentonite as an elastic medium, whereas recent experimental investigations indicate its pronounced viscoelastic behaviour. The aims of this contribution are (i) to numerically estimate the effective attenuation of bentonite as a function of temperature T and water content Wc, so that synthetic data can accurately reproduce experimental traces and (ii) assess the feasibility and limitation of the HLRW repository monitoring by simulating the propagation of sonic waves in a realistic repository geometry. A finite difference method was utilized to simulate the wave propagation in experimental and repository setups. First, the input of the viscoelastic model was varied to achieve a match between experimental and numerical traces. The routine was repeated for several values of Wc and T, so that quality factors Qp(Wc, T) and Qs(Wc, T) were obtained. Then, the full-scale monitoring procedure was simulated for six scenarios, representing the evolution of bentonite's physical state. The estimated Qp and Qs exhibited a minimum at Wc = 20 per cent and higher sensitivity to Wc, rather than T, suggesting that pronounced inelasticity of the clay has to be taken into account in geophysical modelling and analysis. The repository-model traces confirm that active seismic monitoring is, in principle, capable of depicting physical changes in the

  5. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-May 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-10-01

    DOE/CH/10140-05 is an annotated bibliography of approved reports that have been produced for the US Department of Energy Salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the US Department of Energy, State and local officials, the US Nuclear Regulatory Commission, contractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who need a comprehensive listing of reports related to a nuclear waste repository in salt. This document consists of a main report listing, appendixes with Work Breakdown Structure lists, and a topical index.

  6. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-June 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-09-01

    This report is an annotated bibliography of approved reports that have been produced for the US Department of Energy Salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the US Department of Energy, State and local officials, the US Nuclear Regulatory Commission, contractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who need a comprehensive listing of reports related to a nuclear waste repository in salt. This document consists of a main report listing, appendixes with Work Breakdown Structure lists, and a topical index.

  7. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-July 1985

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    DOE/CH/10140-5 is an annotated bibliography of approved reports that have been produced for the US Department of Energy Salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the US Department of Energy, state and local officials, the US Nuclear Regulatory Commission, contractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who need a comprehensive listing of reports related to a nuclear waste repository in salt. This document consists of a main report listing, appendixes with Work Breakdown Structure listings, and a topical report.

  8. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-December 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    This document is an annotated bibliography of approved reports that have been produced for the US Department of Energy Salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the US Department of Energy, State and local officials, the US Nuclear Regulatory Commission, contractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who need a comprehensive listing of reports related to a nuclear waste repository in salt. This document consists of a main report listing, appendixes with Work Breakdown Structure lists, and a topical index.

  9. The microbiology of the Maqarin site, Jordan -- A natural analogue for cementitious radioactive waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    West, J.M.; Coombs, P.; Gardner, S.J.; Rochelle, C.A. [British Geological Survey, Keyworth (United Kingdom). Fluid Processes Group

    1995-12-31

    The Maqarin site, Jordan is being studied as a natural analogue of a cementitious radioactive waste repository. The microbiology has been studied and diverse microbial populations capable of tolerating alkaline pH were detected at all sampling localities. Dissolved organic carbon was identified as the potentially most important reductant with sulfate identified as the main oxidant, both supply energy for microbial life. Calculations on upper limits of microbial numbers were made with a microbiology code (MGSE) using existing information but the results are overestimates when compared with field observations. This indicates that the model is very conservative and that more information on, for example, carbon sources is required.

  10. On release of radionuclides from a near-surface radioactive waste repository to the environment

    Directory of Open Access Journals (Sweden)

    Gudelis Arūnas

    2015-09-01

    Full Text Available A closed near-surface radioactive waste repository is the source of various radionuclides causing the human exposure. Recent investigations confirm an effectiveness of the engineering barriers installed in 2006 to prevent the penetration of radionuclides to the environment. The tritium activity concentration in groundwater decreased from tens of kBq/l to below hundreds of Bq/l. The monitoring and groundwater level data suggest the leaching of tritium from previously contaminated layers of unsaturated zone by rising groundwater while 210Pb may disperse as a decay product of 226Ra daughters.

  11. Conceptual waste package interim product specifications and data requirements for disposal of borosilicate glass defense high-level waste forms in salt geologic repositories

    Energy Technology Data Exchange (ETDEWEB)

    1983-06-01

    The conceptual waste package interim product specifications and data requirements presented are applicable specifically to the normal borosilicate glass product of the Defense Waste Processing Facility (DWPF). They provide preliminary numerical values for the defense high-level waste form parameters and properties identified in the waste form performance specification for geologic isolation in salt repositories. Subject areas treated include containment and isolation, operational period safety, criticality control, waste form/production canister identification, and waste package performance testing requirements. This document was generated for use in the development of conceptual waste package designs in salt. It will be revised as additional data, analyses, and regulatory requirements become available.

  12. The challenge of long-term participatory repository governance. Lessons learned for high level radioactive waste and spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Landstroem, Catharina [East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences; Barbier, Jan-Willem [Antwerp Univ. (Belgium)

    2012-12-15

    Voluntaristic siting procedures for deep geological repositories are becoming increasingly common; they reconfigure the relationship of repositories and society in ways that have implications for the long-term governance of these facilities. This paper identifies three challenges emerging in relation to this question: principles of monitoring, repository content, and facility closure. This paper discusses them in a comparison with similar challenges being addressed in Belgian partnerships founded to facilitate the siting and design of a low- and intermediate level short lived waste repository. The empirical exploration confirms the importance of securing stakeholder engagement throughout the repository lifecycle, for which there is a need to develop knowledge about how to encourage long-term democratic governance systems.

  13. Requirements on radioactive waste for disposal (waste acceptance requirements as of February 2017). Konrad repository; Anforderungen an endzulagernde radioaktive Abfaelle (Endlagerungsbedingungen, Stand: Februar 2017). Endlager Konrad

    Energy Technology Data Exchange (ETDEWEB)

    Kugel, Karin; Moeller, Kai (eds.)

    2017-02-10

    The Bundesamt fuer Strahlenschutz (BfS - Federal Office for Radiation Protection) has established waste acceptance requirements for the Konrad repository. These requirements were developed on the basis of the results of a site-specific safety assessment. They include general requirements on waste packages and specific requirements on waste forms and packagings as well as limitations for activities of individual radionuclides and limitations to masses of non-radioactive harmful substances. Requirements on documentation and delivery of waste packages were additionally included.

  14. Role of natural analogs in performance assessment of nuclear waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Sagar, B.; Wittmeyer, G.W. [Center for Nuclear Waste Regulatory Analysis, San Antonio, TX (United States)

    1995-09-01

    Mathematical models of the flow of water and transport of radionuclides in porous media will be used to assess the ability of deep geologic repositories to safely contain nuclear waste. These models must, in some sense, be validated to ensure that they adequately describe the physical processes occurring within the repository and its geologic setting. Inasmuch as the spatial and temporal scales over which these models must be applied in performance assessment are very large, validation of these models against laboratory and small-scale field experiments may be considered inadequate. Natural analogs may provide validation data that are representative of physico-chemical processes that occur over spatial and temporal scales as large or larger than those relevant to repository design. The authors discuss the manner in which natural analog data may be used to increase confidence in performance assessment models and conclude that, while these data may be suitable for testing the basic laws governing flow and transport, there is insufficient control of boundary and initial conditions and forcing functions to permit quantitative validation of complex, spatially distributed flow and transport models. The authors also express their opinion that, for collecting adequate data from natural analogs, resources will have to be devoted to them that are much larger than are devoted to them at present.

  15. Framework for evaluating the utility of incentive systems for radioactive waste repository siting

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, S.A.; Soderstrom, E.J.; Sorensen, J.; Peelle, E.; Reed, J.H.; Bjornstad, D.J.; Copenhaver, E.D.

    1982-01-01

    The importance of social and institutional issues in siting radioactive waste repositories has been recognized in recent years. Within this set of issues, the siting of repositories over the objections of members of potential host communities is viewed as especially problematic. Incentives to potential host communities have been suggested as a means of increasing local support for and offsetting local opposition to such facilities. Incentives are classified according to their function as mitigation, compensation or reward. Our analysis of results of a 1980 survey (conducted by John Kelly, Complex Systems Group, University of New Hampshire) of 420 rural Wisconsin residents indicates that incentives may achieve the purpose of increasing support for and decreasing opposition to accepting a repository. Criteria for evaluating the utility of incentives are identified. They respond to four basic questions: (1) What is absolutely necessary. (2) Will the incentive work. (3) Can the incentive be understood. and (4) What are the consequences of implementing the incentive. It is suggested that meaningful evaluations of incentives can only be performed by members of potential host communities.

  16. Summary report of first and foreign high-level waste repository concepts; Technical report, working draft 001

    Energy Technology Data Exchange (ETDEWEB)

    Hanke, P.M.

    1987-11-04

    Reference repository concepts designs adopted by domestic and foreign waste disposal programs are reviewed. Designs fall into three basic categories: deep borehole from the surface; disposal in boreholes drilled from underground excavations; and disposal in horizontal tunnels or drifts. The repository concepts developed in Sweden, Switzerland, Finland, Canada, France, Japan, United Kingdom, Belgium, Italy, Holland, Denmark, West Germany and the United States are described. 140 refs., 315 figs., 19 tabs.

  17. Application of integral methods to prediction of heat transfer from a nuclear waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Blesch, C J; Kulacki, F A; Christensen, R N

    1983-10-01

    Integral methods have been developed and applied to the prediction of the far field thermal impact of a nuclear waste repository. Specifically, the heat balance integral has been applied to a semi-infinite layered domain in which a limited number of sublayers form the repository overburden, and the repository is represented by an infinite plane beneath either one or two sublayers. Calculations for PWR spent fuel with an initial areal thermal loading of 60 kW/acre are carried out for various stratigraphies and overburden compositions. Results of the analyses are temperature distributions and heat fluxes to the surface as a function to time. Based on this study, the thermophysical properties of the individual layers are identified as the most important influence on temperature distributions and maximum temperature rise at any position above the repository. The thicknesses of the sublayers play a secondary role for a given rock composition. Where a comparison to exact or numerical solutions is possible, the method predicts maximum temperature increases in the overburden to within 10 percent. Heat fluxes to the surface are found to be relatively insensitive to overburden composition. For dome salt, a maximum of 1.2 percent to 2.7 percent of the initial areal thermal power of a five-term source reaches the surface. For bedded salt, a maximum of 1 percent to 1.8 percent of the initial areal thermal power reaches the surface over a wide range of sublayer compositions. Similarly, low percentages of initial areal thermal power reach the surface for the other stratigraphies considered in the calculations.

  18. Geological criteria for site selection of an LILW radioactive waste repository in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Aurelio, Mario; Taguibao, Kristine Joy [National Institute of Geological Sciences, University of the Philippines, Quezon City (Philippines); Vargas, Edmundo; Palattao, Maria Visitacion; Reyes, Rolando; Nohay, Carl; Singayan, Alfonso [Philippine Nuclear Research Institute, Department of Science and Technology, Quezon City (Philippines)

    2013-07-01

    In the selection of sites for disposal facilities involving low- and intermediate-level radioactive waste (LILW), International Atomic Energy Agency (IAEA) recommendations require that 'the region in which the site is located shall be such that significant tectonic and surface processes are not expected to occur with an intensity that would compromise the required isolation capability of the repository'. Evaluating the appropriateness of a site therefore requires a deep understanding of the geological and tectonic setting of the area. The Philippines sits in a tectonically active region frequented by earthquakes and volcanic activity. Its highly variable morphology coupled with its location along the typhoon corridor in the west Pacific region subjects the country to surface processes often manifested in the form of landslides. The Philippine LILW near surface repository project site is located on the north eastern sector of the Island of Luzon in northern Philippines. This island is surrounded by active subduction trenches; to the east by the East Luzon Trough and to the west by the Manila Trench. The island is also traversed by several branches of the Philippine Fault System. The Philippine LILW repository project is located more than 100 km away from any of these major active fault systems. In the near field, the project site is located less than 10 km from a minor fault (Dummon River Fault) and more than 40 km away from a volcanic edifice (Mt. Caguas). This paper presents an analysis of the potential hazards that these active tectonic features may pose to the project site. The assessment of such geologic hazards is imperative in the characterization of the site and a crucial input in the design and safety assessment of the repository. (authors)

  19. Characteristics of potential repository wastes. Peer review report for revision 1 of DOE/RW-0184

    Energy Technology Data Exchange (ETDEWEB)

    Cowart, C. G.; Notz, K. J.

    1992-10-01

    This report presents the results of a fully documented peer review of DOE/RW-0184, Rev. 1, ''Characteristics of Potential Repository Wastes''. The peer review was chaired and administered by oak Ridge National Laboratory (ORNL) for the Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) and was conducted in accordance with OCRWM QA procedure QAAP 3.3 Peer Review for the purpose of quailing the document for use in OCRWM quality-affecting work. The peer reviewers selected represent a wide range of experience and knowledge particularly suitable for evaluating the subject matter. A total of 596 formal comments were documented by the seven peer review panels, and all were successfully resolved. The peers reached the conclusion that DOE/RW-0184, Rev. 1, is quality determined and suitable for use in quality-affecting work.

  20. Nuclear Waste Facing the Test of Time: The Case of the French Deep Geological Repository Project.

    Science.gov (United States)

    Poirot-Delpech, Sophie; Raineau, Laurence

    2016-12-01

    The purpose of this article is to consider the socio-anthropological issues raised by the deep geological repository project for high-level, long-lived nuclear waste. It is based on fieldwork at a candidate site for a deep storage project in eastern France, where an underground laboratory has been studying the feasibility of the project since 1999. A project of this nature, based on the possibility of very long containment (hundreds of thousands of years, if not longer), involves a singular form of time. By linking project performance to geology's very long timescale, the project attempts "jump" in time, focusing on a far distant future, without understanding it in terms of generations. But these future generations remain measurements of time on the surface, where the issue of remembering or forgetting the repository comes to the fore. The nuclear waste geological storage project raises questions that neither politicians nor scientists, nor civil society, have ever confronted before. This project attempts to address a problem that exists on a very long timescale, which involves our responsibility toward generations in the far future.

  1. Analogues to features and processes of a high-level radioactive waste repository proposed for Yucca Mountain, Nevada

    Science.gov (United States)

    Simmons, Ardyth M.; Stuckless, John S.; with a Foreword by Abraham Van Luik, U.S. Department of Energy

    2010-01-01

    Natural analogues are defined for this report as naturally occurring or anthropogenic systems in which processes similar to those expected to occur in a nuclear waste repository are thought to have taken place over time periods of decades to millennia and on spatial scales as much as tens of kilometers. Analogues provide an important temporal and spatial dimension that cannot be tested by laboratory or field-scale experiments. Analogues provide one of the multiple lines of evidence intended to increase confidence in the safe geologic disposal of high-level radioactive waste. Although the work in this report was completed specifically for Yucca Mountain, Nevada, as the proposed geologic repository for high-level radioactive waste under the U.S. Nuclear Waste Policy Act, the applicability of the science, analyses, and interpretations is not limited to a specific site. Natural and anthropogenic analogues have provided and can continue to provide value in understanding features and processes of importance across a wide variety of topics in addressing the challenges of geologic isolation of radioactive waste and also as a contribution to scientific investigations unrelated to waste disposal. Isolation of radioactive waste at a mined geologic repository would be through a combination of natural features and engineered barriers. In this report we examine analogues to many of the various components of the Yucca Mountain system, including the preservation of materials in unsaturated environments, flow of water through unsaturated volcanic tuff, seepage into repository drifts, repository drift stability, stability and alteration of waste forms and components of the engineered barrier system, and transport of radionuclides through unsaturated and saturated rock zones.

  2. Use of petrophysical data for siting of deep geological repository of radioactive waste

    Science.gov (United States)

    Petrenko, Liliana; Shestopalov, Vyacheslav

    2017-11-01

    The paper is devoted to analyzing the petrophysical properties and petrographical characteristics of Volyn region with the view to choosing the least permeable and so the most suitable geological formation for the radioactive waste disposal. On a basis of the petrophysical estimations of the granitoids properties the argumentation of permeability has been developed for the petrotypes of Volyn region. Also method of classification of the petrotypes with their relative rate of suitability for radioactive waste disposal was developed. As a result of studying the perspectives were shown of the zhytomyr and korosten types of the granitoids as host rock for the radioactive waste disposal. According to the results of investigations performed by Swedish researchers a comparative analysis of rocks based on the age of formation, composition, structural features and some petrophysical properties of granitoids as host rocks for repository of radioactive waste was performed. Detail comparison the data of the granitoids of the Forsmark site in Sweden and the data of the granitoids of the Volyn megablock can be one of the next steps in researching the host rocks for the development of the RW disposal system in Ukraine.

  3. The design of the Bulgaria rad waste repository; Diseno del centro de almacenamiento de residuos radiactivos de Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    Stefonova, I.; Petrov, I.; Navarro, M.; Sanchez, M.; Medinilla, G.

    2012-11-01

    In October 2011 a consortium composed by Westinghouse Engineering Spain SAU, ENRESA and DBE Technology GmbH was awarded a contract for the design of the Bulgaria rad waste repository. The facility, inspired in the spanish centre of El Cabril owned by ENRESA, will consist of a 66 reinforced concrete cells surface repository capable of receiving 18600 already conditioned waste containers of 20 t each, during 60 years, and the related auxiliary facilities and buildings. The project, representing a challenge because of the schedule and required level of detail, goes on fulfilling main milestones and getting customer satisfaction. (Author)

  4. Preclosure analysis of conceptual waste package designs for a nuclear waste repository in tuff

    Energy Technology Data Exchange (ETDEWEB)

    O`Neal, W.C.; Gregg, D.W.; Hockman, J.N.; Russell, E.W.; Stein, W.

    1984-11-01

    This report discusses the selection and analysis of conceptual waste package developed by the Nevada Nuclear Waste Storage Investigations (NNWSI) project for possible disposal of high-level nuclear waste at a candidate site at Yucca Mountain, Nevada. The design requirements that the waste package must conform to are listed, as are several desirable design considerations. Illustrations of the reference and alternative designs are shown. Four austenitic stainless steels (316L SS, 321 SS, 304L SS and Incoloy 825 high nickel alloy) have been selected for candidate canister/overpack materials, and 1020 carbon steel has been selected as the reference metal for the borehole liners. A summary of the results of technical and ecnonmic analyses supporting the selection of the conceptual waste package designs is included. Postclosure containment and release rates are not analyzed in this report.

  5. MODELING OF THE GROUNDWATER TRANSPORT AROUND A DEEP BOREHOLE NUCLEAR WASTE REPOSITORY

    Energy Technology Data Exchange (ETDEWEB)

    N. Lubchenko; M. Rodríguez-Buño; E.A. Bates; R. Podgorney; E. Baglietto; J. Buongiorno; M.J. Driscoll

    2015-04-01

    The concept of disposal of high-level nuclear waste in deep boreholes drilled into crystalline bedrock is gaining renewed interest and consideration as a viable mined repository alternative. A large amount of work on conceptual borehole design and preliminary performance assessment has been performed by researchers at MIT, Sandia National Laboratories, SKB (Sweden), and others. Much of this work relied on analytical derivations or, in a few cases, on weakly coupled models of heat, water, and radionuclide transport in the rock. Detailed numerical models are necessary to account for the large heterogeneity of properties (e.g., permeability and salinity vs. depth, diffusion coefficients, etc.) that would be observed at potential borehole disposal sites. A derivation of the FALCON code (Fracturing And Liquid CONvection) was used for the thermal-hydrologic modeling. This code solves the transport equations in porous media in a fully coupled way. The application leverages the flexibility and strengths of the MOOSE framework, developed by Idaho National Laboratory. The current version simulates heat, fluid, and chemical species transport in a fully coupled way allowing the rigorous evaluation of candidate repository site performance. This paper mostly focuses on the modeling of a deep borehole repository under realistic conditions, including modeling of a finite array of boreholes surrounded by undisturbed rock. The decay heat generated by the canisters diffuses into the host rock. Water heating can potentially lead to convection on the scale of thousands of years after the emplacement of the fuel. This convection is tightly coupled to the transport of the dissolved salt, which can suppress convection and reduce the release of the radioactive materials to the aquifer. The purpose of this work has been to evaluate the importance of the borehole array spacing and find the conditions under which convective transport can be ruled out as a radionuclide transport mechanism

  6. Evolution of cement based materials in a repository for radioactive waste and their chemical barrier function

    Energy Technology Data Exchange (ETDEWEB)

    Kienzler, Bernhard; Metz, Volker; Schlieker, Martina; Bohnert, Elke [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Nukleare Entsorgung (INE)

    2015-07-01

    The use of cementitious materials in nuclear waste management is quite widespread. It covers the solidification of low/intermediate-level liquid as well as solid wastes (e.g. laboratory wastes) and serves as shielding. For both high-level and intermediate-low level activity repositories, cement/concrete likewise plays an important role. It is used as construction material for underground and surface disposals, but more importantly it serves as barrier or sealing material. For the requirements of waste conditioning, special cement mixtures have been developed. These include special mixtures for the solidification of evaporator concentrates, borate binding additives and for spilling solid wastes. In recent years, low-pH cements were strongly discussed especially for repository applications, e.g. (Celine CAU DIT COUMES 2008; Garcia-Sineriz, et al. 2008). Examples for relevant systems are Calcium Silicate Cements (ordinary Portland cement (OPC) based) or Calcium Aluminates Cements (CAC). Low-pH pore solutions are achieved by reduction of the portlandite content by partial substitution of OPC by mineral admixtures with high silica content. The blends follow the pozzolanic reaction consuming Ca(OH){sub 2}. Potential admixtures are silica fume (SF) and fly ashes (FA). In these mixtures, super plasticizers are required, consisting of polycarboxilate or naphthalene formaldehyde as well as various accelerating admixtures (Garcia-Sineriz, et al. 2008). The pH regime of concrete/cement materials may stabilize radionuclides in solution. Newly formed alteration products retain or release radionuclides. An important degradation product of celluloses in cement is iso-saccharin acid. According to Glaus 2004 (Glaus and van Loon 2004), it reacts with radionuclides forming dissolved complexes. Apart from potentially impacting radionuclide solubility limitations, concrete additives, radionuclides or other strong complexants compete for surface sites for sorbing onto cement phases. In

  7. Overweight truck shipments to nuclear waste repositories: legal, political, administrative and operational considerations

    Energy Technology Data Exchange (ETDEWEB)

    1986-03-01

    This report, prepared for the Chicago Operations Office and the Office of Civilian Radioactive Waste Management (OCRWM) of the US Department of Energy (DOE), identifies and analyzes legal, political, administrative, and operational issues that could affect an OCRWM decision to develop an overweight truck cask fleet for the commercial nuclear waste repository program. It also provides information required by DOE on vehicle size-and-weight administration and regulation, pertinent to nuclear waste shipments. Current legal-weight truck casks have a payload of one pressurized-water reactor spent fuel element or two boiling-water reactor spent fuel elements (1 PWR/2 BWR). For the requirements of the 1960s and 1970s, casks were designed with massive shielding to accommodate 6-month-old spent fuel; the gross vehicle weight was limited to 73,280 pounds. Spent fuel to be moved in the 1990s will have aged five years or more. Gross vehicle weight limitation for the Interstate highway system has been increased to 80,000 pounds. These changes allow the design of 25-ton legal-weight truck casks with payloads of 2 PWR/5 BWR. These changes may also allow the development of a 40-ton overweight truck cask with a payload of 4 PWR/10 BWR. Such overweight casks will result in significantly fewer highway shipments compared with legal-weight casks, with potential reductions in transport-related repository risks and costs. These advantages must be weighed against a number of institutional issues surrounding such overweight shipments before a substantial commitment is made to develop an overweight truck cask fleet. This report discusses these issues in detail and provides recommended actions to DOE.

  8. Influence of climate on landscape characteristics in safety assessments of repositories for radioactive wastes.

    Science.gov (United States)

    Becker, J K; Lindborg, T; Thorne, M C

    2014-12-01

    In safety assessments of repositories for radioactive wastes, large spatial and temporal scales have to be considered when developing an approach to risk calculations. A wide range of different types of information may be required. Local to the site of interest, temperature and precipitation data may be used to determine the erosional regime (which may also be conditioned by the vegetation characteristics adopted, based both on climatic and other considerations). However, geomorphological changes may be governed by regional rather than local considerations, e.g. alteration of river base levels, river capture and drainage network reorganisation, or the progression of an ice sheet or valley glacier across the site. The regional climate is in turn governed by the global climate. In this work, a commentary is presented on the types of climate models that can be used to develop projections of climate change for use in post-closure radiological impact assessments of geological repositories for radioactive wastes. These models include both Atmosphere-Ocean General Circulation Models and Earth Models of Intermediate Complexity. The relevant outputs available from these models are identified and consideration is given to how these outputs may be used to inform projections of landscape development. Issues of spatial and temporal downscaling of climate model outputs to meet the requirements of local-scale landscape development modelling are also addressed. An example is given of how climate change and landscape development influence the radiological impact of radionuclides potentially released from the deep geological disposal facility for spent nuclear fuel that SKB (the Swedish Nuclear Fuel and Waste Management Company) proposes to construct at Forsmark, Sweden. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Sub-Seabed Repository for Nuclear Waste - a Strategic Alternative - 13102

    Energy Technology Data Exchange (ETDEWEB)

    McAllister, Keith R. [Department of the Navy, 15 Turkey Foot Court, Darnestown, MD 20878 (United States)

    2013-07-01

    It was recognized at the outset of nuclear power generation in the 1950's that the waste products would require isolation away from humans for periods in excess of 10,000 years. After years studying alternatives, the DOE recommended pursuing the development of a SNF/HLW disposal facility within Yucca Mountain in the desert of Nevada. That recommendation became law with passage of the NWPAA, effectively stopping development of other approaches to the waste problem. In the face of political resistance from the state of Nevada, the 2010 decision to withdraw the license application for the geologic repository at Yucca Mountain has delayed further the most mature option for safe, long-term disposal of SNF and HLW. It is time to revisit an alternative option, sub-seabed disposal within the US Exclusive Economic Zone (EEZ), which would permanently sequester waste out of the biosphere, and out of the reach of saboteurs or terrorists. A proposal is made for a full scale pilot project to demonstrate burying radioactive waste in stable, deep ocean sediments. While much of the scientific work on pelagic clays has been done to develop a sub-seabed waste sequestration capability, this proposal introduces technology from non-traditional sources such as riser-less ocean drilling and the Navy's Sound Surveillance System. The political decisions affecting the issue will come down to site selection and a thorough understanding of comparative risks. The sub-seabed sequestration of nuclear waste has the potential to provide a robust solution to a critical problem for this clean and reliable energy source. (authors)

  10. Finite element code FENIA verification and application for 3D modelling of thermal state of radioactive waste deep geological repository

    Science.gov (United States)

    Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, U. N.

    2017-11-01

    The verification of the FENIA finite element code on some problems and an example of its application are presented in the paper. The code is being developing for 3D modelling of thermal, mechanical and hydrodynamical (THM) problems related to the functioning of deep geological repositories. Verification of the code for two analytical problems has been performed. The first one is point heat source with exponential heat decrease, the second one - linear heat source with similar behavior. Analytical solutions have been obtained by the authors. The problems have been chosen because they reflect the processes influencing the thermal state of deep geological repository of radioactive waste. Verification was performed for several meshes with different resolution. Good convergence between analytical and numerical solutions was achieved. The application of the FENIA code is illustrated by 3D modelling of thermal state of a prototypic deep geological repository of radioactive waste. The repository is designed for disposal of radioactive waste in a rock at depth of several hundred meters with no intention of later retrieval. Vitrified radioactive waste is placed in the containers, which are placed in vertical boreholes. The residual decay heat of radioactive waste leads to containers, engineered safety barriers and host rock heating. Maximum temperatures and corresponding times of their establishment have been determined.

  11. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 8. Repository preconceptual design studies: salt

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This volume, Volume 8 ''Repository Preconceptual Design Studies: Salt,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This document describes a preconceptual design for a nuclear waste storage facility in salt. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/9, ''Drawings for Repository Preconceptual Design Studies: Salt.''

  12. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 10. Repository preconceptual design studies: granite

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This volume, Volume 10 ''Repository Preconceptual Design Studies: Granite,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This document describes a preconceptual design for a nuclear waste storage facility in granite. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/11, ''Drawings for Repository Preconceptual Design Studies: Granite.''

  13. Physico-chemical interactions at the concrete-bitumen interface of nuclear waste repositories

    Directory of Open Access Journals (Sweden)

    Sablayrolles C.

    2013-07-01

    Full Text Available This study investigates the fate of nitrate and organic acids at the bitumenconcrete-steel interface within a repository storage cell for long-lived, intermediatelevel, radioactive wastes. The interface was simulated by a multiphase system in which cementitious matrices (CEM V-paste specimens were exposed to bitumen model leachates consisting of nitrates and acetic acid with and without oxalic acid, chemical compounds likely to be released by bitumen. Leaching experiments were conducted with daily renewal of the solutions in order to accelerate reactions. C-steel chips, simulating the presence of steel in the repository, were added in the systems for some experiments. The concentrations of anions (acetate, oxalate, nitrate, and nitrite and cations (calcium, potassium, ammonium and the pH were monitored over time. Mineralogical changes of the cementitious matrices were analysed by XRD. The results confirmed the stability of nitrates in the absence of steel, whereas, reduction of nitrates was observed in the presence of steel (production of NH4+. The action of acetic acid on the cementitious matrix was similar to that of ordinary leaching; no specific interaction was detected between acetate and cementitious cations. The reaction of oxalic acid with the cementitious phases led to the precipitation of calcium oxalate salts in the outer layer of the matrix. The concentration of oxalate was reduced by 65% inside the leaching medium.

  14. Perceived risk and benefit of nuclear waste repositories: four opinion clusters.

    Science.gov (United States)

    Seidl, Roman; Moser, Corinne; Stauffacher, Michael; Krütli, Pius

    2013-06-01

    Local public resistance can block the site-selection process, construction, and operation of nuclear waste repositories. Social science has established that the perception of risks and benefits, trust in authorities, and opinion on nuclear energy play important roles in acceptance. In particular, risk and benefit evaluations seem critical for opinion formation. However, risks and benefits have rarely been studied independently and, most often, the focus has been on the two most salient groups of proponents and opponents. The aim of this exploratory study is to examine the often-neglected majority of people holding ambivalent or indifferent opinions. We used cluster analysis to examine the sample (N = 500, mailed survey in German-speaking Switzerland) in terms of patterns of risk and benefit perception. We reveal four significantly different and plausible clusters: one cluster with high-benefit ratings in favor of a repository and one cluster with high-risk ratings opposing it; a third cluster shows ambivalence, with high ratings on both risk and benefit scales and moderate opposition, whereas a fourth cluster seems indifferent, rating risks and benefits only moderately compared to the ambivalent cluster. We conclude that a closer look at the often neglected but considerable number of people with ambivalent or indifferent opinions is necessary. Although the extreme factions of the public will most probably not change their opinion, we do not yet know how the opinion of the ambivalent and indifferent clusters might develop over time. © 2012 Society for Risk Analysis.

  15. Physico-chemical interactions at the concrete-bitumen interface of nuclear waste repositories

    Science.gov (United States)

    Bertron, A.; Ranaivomanana, H.; Jacquemet, N.; Erable, B.; Sablayrolles, C.; Escadeillas, G.; Albrecht, A.

    2013-07-01

    This study investigates the fate of nitrate and organic acids at the bitumenconcrete-steel interface within a repository storage cell for long-lived, intermediatelevel, radioactive wastes. The interface was simulated by a multiphase system in which cementitious matrices (CEM V-paste specimens) were exposed to bitumen model leachates consisting of nitrates and acetic acid with and without oxalic acid, chemical compounds likely to be released by bitumen. Leaching experiments were conducted with daily renewal of the solutions in order to accelerate reactions. C-steel chips, simulating the presence of steel in the repository, were added in the systems for some experiments. The concentrations of anions (acetate, oxalate, nitrate, and nitrite) and cations (calcium, potassium, ammonium) and the pH were monitored over time. Mineralogical changes of the cementitious matrices were analysed by XRD. The results confirmed the stability of nitrates in the absence of steel, whereas, reduction of nitrates was observed in the presence of steel (production of NH4+). The action of acetic acid on the cementitious matrix was similar to that of ordinary leaching; no specific interaction was detected between acetate and cementitious cations. The reaction of oxalic acid with the cementitious phases led to the precipitation of calcium oxalate salts in the outer layer of the matrix. The concentration of oxalate was reduced by 65% inside the leaching medium.

  16. Conceptualization of a hypothetical high-level nuclear waste repository site in unsaturated, fractured tuff

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, A.M.; Olague, N.E.; Gallegos, D.P. [Sandia National Labs., Albuquerque, NM (USA)

    1991-01-01

    Under the sponsorship of the US Nuclear Regulatory Commission (NRC), Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal and isolation of high-level nuclear wastes (HLW) in alternative geologic media. As part of this exercise, SNL created a conceptualization of ground-water flow and radionuclide transport in the far field of a hypothetical HLW repository site located in unsaturated, fractured tuff formations. This study provides a foundation for the development of conceptual mathematical, and numerical models to be used in this performance assessment methodology. This conceptualization is site specific in terms of geometry, the regional ground-water flow system, stratigraphy, and structure in that these are based on information from Yucca Mountain located on the Nevada Test Site. However, in terms of processes in unsaturated, fractured, porous media, the model is generic. This report also provides a review and evaluation of previously proposed conceptual models of unsaturated and saturated flow and solute transport. This report provides a qualitative description of a hypothetical HLW repository site in fractured tuff. However, evaluation of the current knowledge of flow and transport at Yucca Mountain does not yield a single conceptual model. Instead, multiple conceptual models are possible given the existing information.

  17. Conceptual model for concrete long time degradation in a deep nuclear waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Lagerblad, B.; Traegaardh, J. [Swedish Cement and Concrete Research Inst., Stockholm (Sweden)

    1994-02-01

    This report is mainly a state-of-the-art report of concrete long time durability in the environment expected in a deep site underground nuclear waste repository in Swedish crystalline bedrock. The report treats how the concrete and the surrounding groundwater will interact and how they will be affected by cement chemistry, type of aggregate etc. The different mechanisms for concrete alteration treated include sulphate attack, carbonation, chloride attack, alkali-silica reaction and leaching phenomena. In a long time perspective, the chemical alterations in concrete is mainly governed by the surrounding groundwater composition. After closure the composition of the groundwater will change character from a modified meteoric to a saline composition. Therefore two different simulated groundwater compositions have been used in modelling the chemical interaction between concrete and groundwater. The report also includes a study of old and historical concrete which show observations concerning recrystallization phenomena in concrete. 72 refs, 39 figs.

  18. Review of geotechnical measurement techniques for a nuclear waste repository in bedded salt

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This report presents a description of geotechnical measurement techniques that can provide the data necessary for safe development - i.e., location, design, construction, operation, decommissioning and abandonment - of a radioactive waste repository in bedded salt. Geotechnical data obtained by a diversity of measurement techniques are required during all phases of respository evolution. The techniques discussed in this report are grouped in the following categories: geologic, geophysical and geodetic; rock mechanics; hydrologic, hydrogeologic and water quality; and thermal. The major contribution of the report is the presentation of extensive tables that provide a review of available measurement techniques for each of these categories. The techniques are also discussed in the text to the extent necessary to describe the measurements and associated instruments, and to evaluate the applicability or limitations of the method. More detailed discussions of thermal phenomena, creep laws and geophysical methods are contained in the appendices; references to detailed explanations of measurement techniques and instrumentation are inluded throughout the report.

  19. Performance assessments for radioactive waste repositories; the rate of movement of faults

    Science.gov (United States)

    Trask, Newell J.

    1982-01-01

    Performance assessments of mined repositories for radioactive waste require estimates of the likelihood of fault movements and earthquakes that may affect the repository and its surrounding ground water flow system. Some previous assessments have attempted to estimate the rate of formation of new faults; some have relied heavily on historic seismicity or the time of latest movement on faults. More appropriate emphasis is on the identification of faults that have been active or may have been active under the present teconic regime in a broad region and on estimates of the long-term rate of movement of such faults. Faults that have moved under the current stress field, even at low rates, are likely to move again during the time the wastes will remain toxic. A continuum exists for the present rate of movement of faults which ranges from 10 mm per year for obviously active faults along the western margin of the North American plate to as low as 10 -4 mm per year for recently documented faults in the Atlantic Coast province. On the basis of regional consistency in movement rates and constraints imposed by geomorphology, I derive upper bounds for the rates of occurrence of fault offsets for various crustal stress provinces in the conterminous United States. These upper bounds are not meant to substitute for detailed studies of specific faults and seismicity at specific sites. They can help to reduce the considerable uncertainty that attaches to all estimates of future tectonic activity. The principal uncertainty in their estimation is the manner in which total slip across faults is distributed among discrete events especially in regions in which the rate of movement is very low.

  20. Public involvement on closure of Asse II radioactive waste repository in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Kallenbach-Herbert, Beate [Oko-Institut e.V., Darmstadt (Germany)

    2013-07-01

    From 1967 to 1978, about 125,800 barrels of low- and intermediate level waste were disposed of - nominally for research purposes - in the former 'Asse' salt mine which had before been used for the production of potash for many years. Since 1988 an inflow of brine is being observed which will cause dangers of flooding and of a collapse due to salt weakening and dissolution if it should increase. Since several years the closure of the Asse repository is planned with the objective to prevent the flooding and collapse of the mine and the release of radioactive substances to the biosphere. The first concept that was presented by the former operator, however, seemed completely unacceptable to regional representatives from politics and NGOs. Their activities against these plans made the project a top issue on the political agenda from the federal to the local level. The paper traces the main reasons which lead to the severe safety problems in the past as well as relevant changes in the governance system today. A focus is put on the process for public involvement in which the Citizens' Advisory Group 'A2B' forms the core measure. Its structure and framework, experience and results, expectations from inside and outside perspectives are presented. Furthermore the question is tackled how far this process can serve as an example for a participatory approach in a siting process for a geological repository for high active waste which can be expected to be highly contested in the affected regions. (authors)

  1. Modelling magma-drift interaction at the proposed high-level radioactive waste repository at Yucca Mountain, Nevada, USA

    NARCIS (Netherlands)

    Woods, Andrew W.; Sparks, Steve; Bokhove, Onno; Lejeune, Anne-Marie; Connor, Charles B.; Hill, Britain E.

    2002-01-01

    We examine the possible ascent of alkali basalt magma containing 2 wt percent water through a dike and into a horizontal subsurface drift as part of a risk assessment for the proposed high-level radioactive waste repository beneath Yucca Mountain, Nevada, USA. On intersection of the dike with the

  2. Analysis of stresses on the 1st phase support of the monitoring drifts of the radioactive waste repository

    Directory of Open Access Journals (Sweden)

    Hatala Jozef

    1999-09-01

    Full Text Available In the paper, the stability analysis of the radioactive waste repository monitoring drifts’ support by means of the numerical modelling - finite element method is described. The aim of this analysis was to judge to what extent the designed 1st phase support’s parameters correspond with the geomechanical conditions determined by the engineering-geological survey.

  3. Estimation of waste package performance requirements for a nuclear waste repository in basalt

    Energy Technology Data Exchange (ETDEWEB)

    Wood, B J

    1980-07-01

    A method of developing waste package performance requirements for specific nuclides is described, and based on federal regulations concerning permissible concentrations in solution at the point of discharge to the accessible environment, a simple and conservative transport model, and baseline and potential worst-case release scenarios.

  4. Investigation on long-term safety aspects of a radioactive waste repository in a diagenic clay formation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jobmann, M.; Gazul, R. [DBE Technology GmbH, Peine (Germany); Fluegge, J. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Braunschweig (Germany); and others

    2017-03-28

    The report presents the sealing concept developed for a Russian near surface low/intermediate level (LILW) waste repository at the ''radon site'' in the lower Cambrian ''blue clay'' formation. The radioactive wastes will be transported to the repository through a tunnel that will connect the underground disposal areas with the surface facilities. Two ventilation shafts for fresh and exhaust air will also connect the underground facilities with the surface. Specific characteristics of the flow regime in the studied area have been simulated. For the construction of a potential repository site it is necessary to know the possible contaminant transport paths to the surface and the biosphere. Due to the lack of sufficient data the calculation can only indicate tendencies that can trigger future explorations. Simulations of the radionuclide (C-14, Cl-36, Se-79, I-129) release from the repository in the liquid phase show a similar behavior as for other repositories in clay. Probabilistic simulations show a large variation of obtained results as a result of the parameter uncertainty.

  5. Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

    Energy Technology Data Exchange (ETDEWEB)

    Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

    1987-09-01

    This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs.

  6. Coupled Multi-physical Simulations for the Assessment of Nuclear Waste Repository Concepts: Modeling, Software Development and Simulation

    Science.gov (United States)

    Massmann, J.; Nagel, T.; Bilke, L.; Böttcher, N.; Heusermann, S.; Fischer, T.; Kumar, V.; Schäfers, A.; Shao, H.; Vogel, P.; Wang, W.; Watanabe, N.; Ziefle, G.; Kolditz, O.

    2016-12-01

    As part of the German site selection process for a high-level nuclear waste repository, different repository concepts in the geological candidate formations rock salt, clay stone and crystalline rock are being discussed. An open assessment of these concepts using numerical simulations requires physical models capturing the individual particularities of each rock type and associated geotechnical barrier concept to a comparable level of sophistication. In a joint work group of the Helmholtz Centre for Environmental Research (UFZ) and the German Federal Institute for Geosciences and Natural Resources (BGR), scientists of the UFZ are developing and implementing multiphysical process models while BGR scientists apply them to large scale analyses. The advances in simulation methods for waste repositories are incorporated into the open-source code OpenGeoSys. Here, recent application-driven progress in this context is highlighted. A robust implementation of visco-plasticity with temperature-dependent properties into a framework for the thermo-mechanical analysis of rock salt will be shown. The model enables the simulation of heat transport along with its consequences on the elastic response as well as on primary and secondary creep or the occurrence of dilatancy in the repository near field. Transverse isotropy, non-isothermal hydraulic processes and their coupling to mechanical stresses are taken into account for the analysis of repositories in clay stone. These processes are also considered in the near field analyses of engineered barrier systems, including the swelling/shrinkage of the bentonite material. The temperature-dependent saturation evolution around the heat-emitting waste container is described by different multiphase flow formulations. For all mentioned applications, we illustrate the workflow from model development and implementation, over verification and validation, to repository-scale application simulations using methods of high performance computing.

  7. Geotechnical support and topical studies for nuclear waste geologic repositories: Annual report, fiscal year 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    This multidisciplinary project was initiated in fiscal year 1986. It comprises 11 reports in two major interrelated tasks: The technical assistance part of the project includes reviewing the progress of the major projects in the DOE Office of Civilian Radioactive waste Management (OCRWM) Program and advising the Engineering and Geotechnology Division on significant technical issues facing each project; analyzing geotechnical data, reports, tests, surveys and plans for the different projects; reviewing and commenting on major technical reports and other program documents such as Site Characterization Plans (SCP) and Study Plans; and providing scientific and technical input at technical meetings. The topical studies activity comprises studies on scientific and technical ions and issues of significance to in-situ testing, test analysis methods, and site characterization of nuclear waste geologic repositories. The subjects of study were selected based on discussions with DOE staff. One minor topic is a preliminary consideration and planning exercise for postclosure monitoring studies. The major task, with subtasks involving various geoscience disciplines, is a study of the mechanical, hydraulic, geophysical and geochemical properties of fractures in geologic rock masses.

  8. SPRAYED CLAY TECHNOLOGY FOR THE DEEP REPOSITORY OF HIGH-LEVEL RADIOACTIVE WASTE

    Directory of Open Access Journals (Sweden)

    Lucie Hausmannová

    2012-07-01

    Full Text Available The sealing barrier will play very important role in the Czech disposal concept of high level radioactive waste. It follows Swedish SKB3 design where granitic rock environment will host the repository. Swelling clay based materials as the most favorable for sealing purposes were selected. Such clays must fulfill certain requirements (e.g. on swelling properties, hydraulic conductivity or plasticity and must be stable for thousands of years. Better sealing behavior is obtained when the clay is compacted. Technology of the seal construction can vary according to its target dry density. Very high dry density is needed for buffer (sealing around entire canister with radioactive waste. Less strict requirements are on material backfilling the access galleries. It allows compaction to lower dry density than in case of buffer. One of potential technology for backfilling is to compact clay layers in most of the gallery profile by common compaction machines (rollers etc. and to spray clay into the uppermost part afterwards. The paper introduces the research works on sprayed clay technology performed at the Centre of Experimental Geotechnics of the Czech Technical University in Prague. Large scale in situ demonstration of filling of short drift in the Josef Gallery is also mentioned.

  9. Industrial Qualification Process for Optical Fibers Distributed Strain and Temperature Sensing in Nuclear Waste Repositories

    Directory of Open Access Journals (Sweden)

    S. Delepine-Lesoille

    2012-01-01

    Full Text Available Temperature and strain monitoring will be implemented in the envisioned French geological repository for high- and intermediate-level long-lived nuclear wastes. Raman and Brillouin scatterings in optical fibers are efficient industrial methods to provide distributed temperature and strain measurements. Gamma radiation and hydrogen release from nuclear wastes can however affect the measurements. An industrial qualification process is successfully proposed and implemented. Induced measurement uncertainties and their physical origins are quantified. The optical fiber composition influence is assessed. Based on radiation-hard fibers and carbon-primary coatings, we showed that the proposed system can provide accurate temperature and strain measurements up to 0.5 MGy and 100% hydrogen concentration in the atmosphere, over 200 m distance range. The selected system was successfully implemented in the Andra underground laboratory, in one-to-one scale mockup of future cells, into concrete liners. We demonstrated the efficiency of simultaneous Raman and Brillouin scattering measurements to provide both strain and temperature distributed measurements. We showed that 1.3 μm working wavelength is in favor of hazardous environment monitoring.

  10. Geotechnical support and topical studies for nuclear waste geologic repositories: Annual report, Fiscal Year 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-11-01

    The multidisciplinary project was initiated in fiscal year 1986. It comprises two major interrelated parts: (1) Technical Assistance. This part of the project includes: (a) review of the progress of major projects in the DOE Office of Civilian Radioactive Waste Management Program and advise the Engineering and Geotechnology Division on significant technical issues facing each project; (b) analyze geotechnical data, reports, tests, surveys and plans for the different projects; (c) review and comment on major technical reports and other program documents such as site characterization plans and area characterization plans and (d) provide scientific and technical input at technical meetings. (2) Topical Studies. This activity comprises studies on scientific and technical topics, and issues of significance to in-situ testing, test analysis methods, and performance assessment of nuclear waste geologic repositories. The subjects of study were selected based on discussions with DOE staff. For fiscal year 1986, one minor and one major area of investigation were undertaken. The minor topic is a preliminary consideration and planning exercise for post-closure monitoring studies. The major topic, with subtasks involving various geoscience disciplines, is on the mechanical, hydraulic, geophysical and geochemical properties of fractures in geologic rock masses. The present report lists the technical reviews and comments made during the fiscal year and summarizes the technical progress of the topical studies.

  11. [Distribution and activity of microorganisms in the deep repository for liquid radioactive waste at the Siberian Chemical Combine].

    Science.gov (United States)

    Nazina, T N; Luk'ianova, E A; Zakharova, E V; Ivoĭlov, V S; Poltaraus, A B; Kalmykov, S N; Beliaev, S S; Zubkov, A A

    2006-01-01

    The physicochemical conditions, composition of microbial communities, and the rates of anaerobic processes in the deep sandy horizons used as a repository for liquid radioactive wastes (LRW) at the Siberian Chemical Combine (Seversk, Tomsk oblast), were studied. Formation waters from the observation wells drilled into the production horizons of the radioactive waste disposal site were found to be inhabited by microorganisms of different physiological groups, including aerobic organotrophs, anaerobic fermentative, denitrifying, sulfate-reducing, and methanogenic bacteria. The density of microbial population, as determined by cultural methods, was low and usually did not exceed 10(4) cells/ml. Enrichment cultures of microorganisms producing gases (hydrogen, methane, carbon dioxide, and hydrogen sulfide) and capable of participation in the precipitation of metal sulfides were obtained from the waters of production horizons. The contemporary processes of sulfate reduction and methanogenesis were assayed; the rates of these terminal processes of organic matter destruction were found to be low. The denitrifying bacteria from the underground repository were capable of reducing the nitrates contained in the wastes, provided sources of energy and biogenic elements were available. Biosorption of radionuclides by the biomass of aerobic bacteria isolated from groundwater was demonstrated. The results obtained give us insight into the functional structure of the microbial community inhabiting the waters of repository production horizons. This study indicates that the numbers and activity of microbial cells are low both inside and outside the zone of radioactive waste dispersion, in spite of the long period of waste discharge.

  12. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-September 1984

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    ONWI-200 is a bibliography of approved reports that have been produced for the US Department of Energy salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the US Department of Energy, state and local officials, the US Nuclear Regulatory Commission, subcontractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who need a comprehensive listing of reports related to a nuclear waste repository in salt. This document is divided into three parts. The first two list reports in sequence by their work breakdown structure. Part 1 lists salt-specific reports, and Part 2 lists generic reports. Part 3 presents the bibliographic data for the reports in Parts 1 and 2.

  13. Bibliography of studies for the Salt Repository Project Office of the Civilian Radioactive Waste Management Program, April 1978-March 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-06-01

    ONWI-200 is a bibliography of approved reports produced for the US Department of Energy Salt Repository Project Office of the Civilian Radioactive Waste Management Program since April 1978. This document is intended for use by the Department of Energy, state and local officials, the US Nuclear Regulatory Commission, subcontractors to the Office of Nuclear Waste Isolation, concerned citizens, and others who have need for a comprehensive listing of reports related to a nuclear waste repository in salt. This document is divided into three parts. The first two list reports in sequence by their work breakdown structure. Part 1 lists salt-specific reports, and Part 2 lists generic reports. Part 3 presents the bibliographic data for the reports in Parts 1 and 2.

  14. Radiation doses from the transport of radioactive waste to a future repository in Denmark. A model study

    Energy Technology Data Exchange (ETDEWEB)

    2011-05-15

    The radiation doses modelled for transport of radioactive waste to a future repository in Denmark, demonstrates that the risk associated with road and sea transport should not limit the future selection of a location of the repository. From a safety perspective both road and sea transport seem to be feasible modes of transport. Although the modelling in most cases is performed conservatively, the modelled doses suggest that both transport methods can be carried out well within the national dose limits. Additionally, the dose levels associated with the modelled accident scenarios are low and the scenarios are thus found to be acceptable taken the related probabilities into account. (LN)

  15. The new Wallula CO2 project may revive the old Columbia River Basalt (western USA) nuclear-waste repository project

    Science.gov (United States)

    Schwartz, Michael O.

    2018-02-01

    A novel CO2 sequestration project at Wallula, Washington, USA, makes ample use of the geoscientific data collection of the old nuclear waste repository project at the Hanford Site nearby. Both projects target the Columbia River Basalt (CRB). The new publicity for the old project comes at a time when the approach to high-level nuclear waste disposal has undergone fundamental changes. The emphasis now is on a technical barrier that is chemically compatible with the host rock. In the ideal case, the waste container is in thermodynamic equilibrium with the host-rock groundwater regime. The CRB groundwater has what it takes to represent the ideal case.

  16. The new Wallula CO2 project may revive the old Columbia River Basalt (western USA) nuclear-waste repository project

    Science.gov (United States)

    Schwartz, Michael O.

    2017-07-01

    A novel CO2 sequestration project at Wallula, Washington, USA, makes ample use of the geoscientific data collection of the old nuclear waste repository project at the Hanford Site nearby. Both projects target the Columbia River Basalt (CRB). The new publicity for the old project comes at a time when the approach to high-level nuclear waste disposal has undergone fundamental changes. The emphasis now is on a technical barrier that is chemically compatible with the host rock. In the ideal case, the waste container is in thermodynamic equilibrium with the host-rock groundwater regime. The CRB groundwater has what it takes to represent the ideal case.

  17. Conceptualization and software development of a simulation environment for probalistic safety assessment of radioactive waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Ghofrani, Javad

    2016-05-26

    Uncertainty and sensitivity analysis of complex simulation models are prominent issues, both in scientific research and education. ReSUS (Repository Simulation, Uncertainty propagation and Sensitivity analysis) is an integrated platform to perform such analysis with numerical models that simulate the THMC (Thermal Hydraulical Mechanical and Chemical) coupled processes via different programs, in particular in the context of safety assessments for radioactive waste repositories. This thesis presents the idea behind the software platform ReSUS and its working mechanisms. Apart from the idea and the working mechanisms, the thesis describes applications related to the safety assessment of radioactive waste disposal systems. In this thesis, previous simulation tools (including the preceding version of ReSUS) are analyzed in order to provide a comprehensive view of the state of the art. In comparison to this state, a more sophisticated software tool is developed here, which provides features which are not offered by previous simulation tools. To achieve this objective, the software platform ReSUS provides a framework for handling probabilistic data uncertainties using deterministic external simulation tools, thus enhancing uncertainty and sensitivity analysis. This platform performs probabilistic simulations of various models, in particular THMC coupled processes, using stand-alone deterministic simulation software tools. The complete software development process of the ReSUS Platform is discussed in this thesis. ReSUS components are developed as libraries, which are capable of being linked to other code implementations. In addition, ASCII template files are used as means for uncertainty propagation into the input files of deterministic simulation tools. The embedded input sampler and analysis tools allow for sensitivity analysis in several kinds of simulation designs. The novelty of the ReSUS platform consists in the flexibility to assign external stand-alone software

  18. Geochemical modelling of bentonite porewater in high-level waste repositories

    Science.gov (United States)

    Wersin, Paul

    2003-03-01

    The description of the geochemical properties of the bentonite backfill that serves as engineered barrier for nuclear repositories is a central issue for perfomance assessment since these play a large role in determining the fate of contaminants released from the waste. In this study the porewater chemistry of bentonite was assessed with a thermodynamic modelling approach that includes ion exchange, surface complexation and mineral equilibrium reactions. The focus was to identify the geochemical reactions controlling the major ion chemistry and acid-base properties and to explore parameter uncertainties specifically at high compaction degrees. First, the adequacy of the approach was tested with two distinct surface complexation models by describing recent experimental data performed at highly varying solid/liquid ratios and ionic strengths. The results indicate adequate prediction of the entire experimental data set. Second, the modelling was extended to repository conditions, taking as an example the current Swiss concept for high-level waste where the compacted bentonite backfill is surrounded by argillaceous rock. The main reactions controlling major ion chemistry were found to be calcite equilibrium and concurrent Na-Ca exchange reactions and de-protonation of functional surface groups. Third, a sensitivity analysis of the main model parameters was performed. The results thereof indicate a remarkable robustness of the model with regard to parameter uncertainties. The bentonite system is characterised by a large acid-base buffering capacity which leads to stable pH-conditions. The uncertainty in pH was found to be mainly induced by the pCO 2 of the surrounding host rock. The results of a simple diffusion-reaction model indicate only minor changes of porewater composition with time, which is primarily due to the geochemical similarities of the bentonite and the argillaceous host rock. Overall, the results show the usefulness of simple thermodynamic models to

  19. Anthropogenic influences on groundwater in the vicinity of a long-lived radioactive waste repository

    Science.gov (United States)

    Thomas, Matthew A.; Kuhlman, Kristopher L.; Ward, Anderson L.

    2017-07-01

    The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. In early conceptual models of the Culebra, groundwater levels were not expected to fluctuate markedly, except in response to long-term climatic changes, with response times on the order of hundreds to thousands of years. Recent groundwater pressures measured in monitoring wells record more than 25 m of drawdown. The fluctuations are attributed to pumping activities at a privately-owned well that may be associated with the demand of the Permian Basin hydrocarbon industry for water. The unprecedented magnitude of drawdown provides an opportunity to quantitatively assess the influence of unplanned anthropogenic forcings near the WIPP. Spatially variable realizations of Culebra saturated hydraulic conductivity and storativity were used to develop groundwater flow models to estimate a pumping rate for the private well and investigate its effect on advective transport. Simulated drawdown shows reasonable agreement with observations (average Model Efficiency coefficient = 0.7). Steepened hydraulic gradients associated with the pumping reduce estimates of conservative particle travel times across the domain by one-half and shift the intersection of the average particle track with the compliance boundary by more than two kilometers. The value of the transient simulations conducted for this study lie in their ability to (i) improve understanding of the Culebra groundwater flow system and (ii) challenge the notion of time-invariant land use in the vicinity of the WIPP.

  20. Preliminary total-system analysis of a potential high-level nuclear waste repository at Yucca Mountain

    Energy Technology Data Exchange (ETDEWEB)

    Eslinger, P.W.; Doremus, L.A.; Engel, D.W.; Miley, T.B.; Murphy, M.T.; Nichols, W.E.; White, M.D. [Pacific Northwest Lab., Richland, WA (United States); Langford, D.W.; Ouderkirk, S.J. [Westinghouse Hanford Co., Richland, WA (United States)

    1993-01-01

    The placement of high-level radioactive wastes in mined repositories deep underground is considered a disposal method that would effectively isolate these wastes from the environment for long periods of time. This report describes modeling performed at PNL for Yucca Mountain between May and November 1991 addressing the performance of the entire repository system related to regulatory criteria established by the EPA in 40 CFR Part 191. The geologic stratigraphy and material properties used in this study were chosen in cooperation with performance assessment modelers at Sandia National Laboratories (SNL). Sandia modeled a similar problem using different computer codes and a different modeling philosophy. Pacific Northwest Laboratory performed a few model runs with very complex models, and SNL performed many runs with much simpler (abstracted) models.

  1. Use of groundwater lifetime expectancy for the performance assessment of a deep geologic waste repository: 1. Theory, illustrations, and implications

    CERN Document Server

    Cornaton, F J; Normani, S D; Sudicky, E A; Sykes, J F

    2011-01-01

    Long-term solutions for the disposal of toxic wastes usually involve isolation of the wastes in a deep subsurface geologic environment. In the case of spent nuclear fuel, if radionuclide leakage occurs from the engineered barrier, the geological medium represents the ultimate barrier that is relied upon to ensure safety. Consequently, an evaluation of radionuclide travel times from a repository to the biosphere is critically important in a performance assessment analysis. In this study, we develop a travel time framework based on the concept of groundwater lifetime expectancy as a safety indicator. Lifetime expectancy characterizes the time that radionuclides will spend in the subsurface after their release from the repository and prior to discharging into the biosphere. The probability density function of lifetime expectancy is computed throughout the host rock by solving the backward-in-time solute transport adjoint equation subject to a properly posed set of boundary conditions. It can then be used to defi...

  2. Micron-Scale MIC of Alloy 22 After Long Term Incubation in Saturated Nuclear Waste Repository Microcosms

    Energy Technology Data Exchange (ETDEWEB)

    Martin, S; Horn, J; Carrillo, C

    2003-10-29

    The effects of potential microbiologically influenced corrosion (MIC) on candidate packaging materials for nuclear waste containment are being assessed. Coupons of Alloy 22, the outer barrier candidate for waste packaging, were exposed to a simulated, saturated repository environment consisting of crushed rock from the repository site and a continual flow of simulated groundwater for periods up to five years. Coupons were incubated with YM tuff under both sterile and non-sterile conditions. Surfacial analysis of the biotically-incubated coupons show development of both submicron-sized pinholes and pores; these features were not present on either sterile or untreated control coupons. Quantification of these effects will help define the overall contribution of MIC to the integrity of the containment system over a period of 10,000 years.

  3. Sorption of strontium on uranyl peroxide: implications for a high-level nuclear waste repository.

    Science.gov (United States)

    Sureda, Rosa; Martínez-Lladó, Xavier; Rovira, Miquel; de Pablo, Joan; Casas, Ignasi; Giménez, Javier

    2010-09-15

    Strontium-90 is considered the most important radioactive isotope in the environment and one of the most frequently occurring radionuclides in groundwaters at nuclear facilities. The uranyl peroxide studtite (UO2O2 . 4H2O) has been observed to be formed in spent nuclear fuel leaching experiments and seems to have a relatively high sorption capacity for some radionuclides. In this work, the sorption of strontium onto studtite is studied as a function of time, strontium concentration in solution and pH. The main results obtained are (a) sorption is relatively fast although slower than for cesium; (b) strontium seems to be sorbed via a monolayer coverage of the studtite surface, (c) sorption has a strong dependence on ionic strength, is negligible at acidic pH, and increases at neutral to alkaline pH (almost 100% of the strontium in solution is sorbed above pH 10). These results point to uranium secondary solid phase formation on the spent nuclear fuel as an important mechanism for strontium retention in a high-level nuclear waste repository (HLNW). Copyright 2010 Elsevier B.V. All rights reserved.

  4. An assessment of strontium sorption onto bentonite buffer material in waste repository.

    Science.gov (United States)

    Pathak, Pankaj

    2017-03-01

    In the present study, changes occurring in sorption characteristics of a representative bentonite (WIn-BT) exposed to SrCl 2 (0.001-0.1 M) under the pH range of 1-13 were investigated. Such interaction revealed a significant variation in surface charge density and binding energy of ions with respect to bentonite, and alteration in their physicochemical properties viz., specific surface area, cation exchange capacity, thermal and mechanical behaviour were observed. The distribution coefficients (k d ) calculated for sorption onto virgin (UCBT) and contaminated bentonite (CBT) indicated a greater influence of mineralogical changes occurred with variance of pH and strontium concentration. Notably, the sorption mechanism clearly elucidates the effect of structural negative charge and existence of anionic metal species onto CBT, and depicted the reason behind significant k d values at highly acidic and alkaline pH. The maximum k d of UCBT and CBT (0.001M SrCl2) were 8.99 and 2.92 L/kg, respectively, at the soil pH 8.5; whereas it was 2.37 and 1.23 L/kg at pH 1 for the CBT (0.1M SrCl2) and CBT (0.01M SrCl2) , respectively. The findings of this study can be useful to identify the physicochemical parameters of candidate buffer material and sorption reversibility in waste repository.

  5. Integration of hydrological and ecological modelling for the assessment of a nuclear waste repository

    Science.gov (United States)

    Berglund, Sten; Kautsky, Ulrik; Lindborg, Tobias; Selroos, Jan-Olof

    2009-02-01

    The Swedish Nuclear Fuel and Waste Management Co. (SKB) is currently investigating two sites in Sweden as potential locations for underground disposal of spent nuclear fuel. The site investigations cover geology, chemistry, hydrology and ecology, among several other disciplines. Strong emphasis is put on the characterisation of properties and processes affecting the water-born transport and retention of radionuclides along potential flow paths from repository depth (ca. 500 m below ground) to ground surface, and the dispersal and accumulation of the radionuclides in the surface system. The modelling performed to support the site descriptions and the safety assessments utilises a wide range of hydrological modelling tools. These include tools primarily developed for modelling groundwater flow in fractured rock, and modelling tools that handle surface and subsurface flows, water uptake in vegetation and the interactions with the atmosphere. The couplings between the hydrogeology, the near surface hydrology and the surface ecosystems are especially important in this integrated modelling. This paper highlights some ecohydrological aspects of this coupled modelling and provides example results from site descriptive and safety assessment modelling.

  6. Workshop on the source term for radionuclide migration from high-level waste or spent nuclear fuel under realistic repository conditions: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, T.O.; Muller, A.B. (eds.)

    1985-07-01

    Sixteen papers were presented at the workshop. The fourteen full-length papers included in the proceedings were processed separately. Only abstracts were included for the following two papers: Data Requirements Based on Performance Assessment Analyses of Conceptual Waste Packages in Salt Repositories, and The Potential Effects of Radiation on the Source Term in a Salt Repository. (LM)

  7. Characterizing the proposed geologic repository for high-level radioactive waste at Yucca Mountain, Nevada--hydrology and geochemistry

    Science.gov (United States)

    Stuckless, John S.; Levich, Robert A.

    2012-01-01

    This hydrology and geochemistry volume is a companion volume to the 2007 Geological Society of America Memoir 199, The Geology and Climatology of Yucca Mountain and Vicinity, Southern Nevada and California, edited by Stuckless and Levich. The work in both volumes was originally reported in the U.S. Department of Energy regulatory document Yucca Mountain Site Description, for the site characterization study of Yucca Mountain, Nevada, as the proposed U.S. geologic repository for high-level radioactive waste. The selection of Yucca Mountain resulted from a nationwide search and numerous committee studies during a period of more than 40 yr. The waste, largely from commercial nuclear power reactors and the government's nuclear weapons programs, is characterized by intense penetrating radiation and high heat production, and, therefore, it must be isolated from the biosphere for tens of thousands of years. The extensive, unique, and often innovative geoscience investigations conducted at Yucca Mountain for more than 20 yr make it one of the most thoroughly studied geologic features on Earth. The results of these investigations contribute extensive knowledge to the hydrologic and geochemical aspects of radioactive waste disposal in the unsaturated zone. The science, analyses, and interpretations are important not only to Yucca Mountain, but also to the assessment of other sites or alternative processes that may be considered for waste disposal in the future. Groundwater conditions, processes, and geochemistry, especially in combination with the heat from radionuclide decay, are integral to the ability of a repository to isolate waste. Hydrology and geochemistry are discussed here in chapters on unsaturated zone hydrology, saturated zone hydrology, paleohydrology, hydrochemistry, radionuclide transport, and thermally driven coupled processes affecting long-term waste isolation. This introductory chapter reviews some of the reasons for choosing to study Yucca Mountain as a

  8. Characterizing the proposed geologic repository for high-level radioactive waste at Yucca Mountain, Nevada: hydrology and geochemistry

    Science.gov (United States)

    Stuckless, John S.; Levich, Robert A.

    2012-01-01

    This hydrology and geochemistry volume is a companion volume to the 2007 Geological Society of America Memoir 199, The Geology and Climatology of Yucca Mountain and Vicinity, Southern Nevada and California, edited by Stuckless and Levich. The work in both volumes was originally reported in the U.S. Department of Energy regulatory document Yucca Mountain Site Description, for the site characterization study of Yucca Mountain, Nevada, as the proposed U.S. geologic repository for high-level radioactive waste. The selection of Yucca Mountain resulted from a nationwide search and numerous committee studies during a period of more than 40 yr. The waste, largely from commercial nuclear power reactors and the government's nuclear weapons programs, is characterized by intense penetrating radiation and high heat production, and, therefore, it must be isolated from the biosphere for tens of thousands of years. The extensive, unique, and often innovative geoscience investigations conducted at Yucca Mountain for more than 20 yr make it one of the most thoroughly studied geologic features on Earth. The results of these investigations contribute extensive knowledge to the hydrologic and geochemical aspects of radioactive waste disposal in the unsaturated zone. The science, analyses, and interpretations are important not only to Yucca Mountain, but also to the assessment of other sites or alternative processes that may be considered for waste disposal in the future. Groundwater conditions, processes, and geochemistry, especially in combination with the heat from radionuclide decay, are integral to the ability of a repository to isolate waste. Hydrology and geochemistry are discussed here in chapters on unsaturated zone hydrology, saturated zone hydrology, paleohydrology, hydrochemistry, radionuclide transport, and thermally driven coupled processes affecting long-term waste isolation. This introductory chapter reviews some of the reasons for choosing to study Yucca Mountain as a

  9. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 14. Repository preconceptual design studies: basalt

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This document describes a preconceptual design for a nuclear waste storage facility in basalt. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/15, ''Drawings for Repository Preconceptual Design Studies: Basalt.''

  10. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 12. Repository preconceptual design studies: shale

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This document describes a preconceptual design for a nuclear waste storage facility in shale. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/13, ''Drawings for Repository Preconceptual Design Studies: Shale.''

  11. Initial demonstration of the NRC`s capability to conduct a performance assessment for a High-Level Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Codell, R.; Eisenberg, N.; Fehringer, D.; Ford, W.; Margulies, T.; McCartin, T.; Park, J.; Randall, J.

    1992-05-01

    In order to better review licensing submittals for a High-Level Waste Repository, the US Nuclear Regulatory Commission staff has expanded and improved its capability to conduct performance assessments. This report documents an initial demonstration of this capability. The demonstration made use of the limited data from Yucca Mountain, Nevada to investigate a small set of scenario classes. Models of release and transport of radionuclides from a repository via the groundwater and direct release pathways provided preliminary estimates of releases to the accessible environment for a 10,000 year simulation time. Latin hypercube sampling of input parameters was used to express results as distributions and to investigate model sensitivities. This methodology demonstration should not be interpreted as an estimate of performance of the proposed repository at Yucca Mountain, Nevada. By expanding and developing the NRC staff capability to conduct such analyses, NRC would be better able to conduct an independent technical review of the US Department of Energy (DOE) licensing submittals for a high-level waste (HLW) repository. These activities were divided initially into Phase 1 and Phase 2 activities. Additional phases may follow as part of a program of iterative performance assessment at the NRC. The NRC staff conducted Phase 1 activities primarily in CY 1989 with minimal participation from NRC contractors. The Phase 2 activities were to involve NRC contractors actively and to provide for the transfer of technology. The Phase 2 activities are scheduled to start in CY 1990, to allow Sandia National Laboratories to complete development and transfer of computer codes and the Center for Nuclear Waste Regulatory Analyses (CNWRA) to be in a position to assist in the acquisition of the codes.

  12. Experimental assessment of non-treated bentonite as the buffer material of a radioactive waste repository.

    Science.gov (United States)

    Choi, J; Kang, C H; Whang, J

    2001-05-01

    The bentonite-based material being evaluated in several countries as potential barriers and seals for a nuclear waste disposal system is of mostly sodium type, whereas most bentonite available in Korea is known to be of calcium type. In order to investigate whether local Korean bentonite could be useful as a buffer or sealing material in an HLW repository system, raw bentonites sampled from the south-east area of Korea were examined in terms of their physicochemical properties such as surface area, CEC, swelling rate, and distribution coefficient. The diffusion behavior of some radionuclides of interest in compacted bentonite was also investigated. Considering that HLW generates decay heat over a long time, the thermal effect on the physicochemical properties of bentonite was also included. Four local samples were identified as Ca-bentonite through XRD and chemical analysis. Of the measured values of surface area, CEC and swelling rate of the local samples, Sample-A was found to have the greatest properties as the most likely candidate barrier material. The distribution coefficients of Cs-137, Sr-85, Co-60 and Am-241 for Sample-A sample were measured by the batch method. Sorption equilibrium was reached in around 8 to 10 days, but that of Sr was found to be reached earlier. Comparing the results of this study with the reference data, domestic bentonite was found to have a relatively high sorption ability. For the effect of varying concentration on sorption, the values of Kd peaked at 10(-9)-10(-7) mol/l of radionuclide concentration. In XRD analysis, the (001) peak of Sample-A was fully collapsed above 200 degrees C. The shoulder appearing at about 150 degrees C in the DSC curve was found to be evidence that Sample-A is predominated by Ca-montmorillonite. The loss of swelling capacity and CEC of Sample-A started at about 100 degrees C. The swelling data and the (001) peak intensity of the heat-treated sample showed that they were linearly interrelated. The measured

  13. DECOVALEX III PROJECT. Mathematical Models of Coupled Thermal-Hydro-Mechanical Processes for Nuclear Waste Repositories. Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    Jing, L.; Stephansson, O. [Royal Inst. of Technology, Stockholm (Sweden). Engineering Geology; Tsang, C.F. [Lawrence Berkely National Laboratory, Berkeley, CA (United States). Earth Science Div.; Mayor, J.C. [ENRESA, Madrid (Spain); Kautzky, F. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden)] (eds.)

    2005-02-15

    DECOVALEX is an international consortium of governmental agencies associated with the disposal of high-level nuclear waste in a number of countries. The consortium's mission is the DEvelopment of COupled models and their VALidation against EXperiments. Hence the acronym/name DECOVALEX. Currently, agencies from Canada, Finland, France, Germany, Japan, Spain, Switzerland, Sweden, United Kingdom, and the United States are in DECOVALEX. Emplacement of nuclear waste in a repository in geologic media causes a number of physical processes to be intensified in the surrounding rock mass due to the decay heat from the waste. The four main processes of concern are thermal, hydrological, mechanical and chemical. Interactions or coupling between these heat-driven processes must be taken into account in modeling the performance of the repository for such modeling to be meaningful and reliable. DECOVALEX III is organized around four tasks. The FEBEX (Full-scale Engineered Barriers EXperiment) in situ experiment being conducted at the Grimsel site in Switzerland is to be simulated and analyzed in Task 1. Task 2, centered around the Drift Scale Test (DST) at Yucca Mountain in Nevada, USA, has several sub-tasks (Task 2A, Task 2B, Task 2C and Task 2D) to investigate a number of the coupled processes in the DST. Task 3 studies three benchmark problems: a) the effects of thermal-hydrologic-mechanical (THM) coupling on the performance of the near-field of a nuclear waste repository (BMT1); b) the effect of upscaling THM processes on the results of performance assessment (BMT2); and c) the effect of glaciation on rock mass behavior (BMT3). Task 4 is on the direct application of THM coupled process modeling in the performance assessment of nuclear waste repositories in geologic media. This executive summary presents the motivation, structure, objectives, approaches, and the highlights of the main achievements and outstanding issues of the tasks studied in the DECOVALEX III project

  14. Study on the locational criteria for submarine rock repositories of low and medium level radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, G. H.; Kang, W. J.; Kim, T. J. and others [Chungnam National Univ., Taejon (Korea, Republic of)

    1992-01-15

    Submarine repositories have significant advantages over their land counterparts locating close to the areas of daily human activities. Consequently, the construction of submarine repositories on the vast continental shelves around Korean seas is considered to be highly positive. In this context, the development of locational criteria primarily targeting the safety of submarine rock repositories is very important.The contents of the present study are: analyzing characteristics of marine environment: Search of potential hazards to, and environmental impact by, the submarine repositories; Investigation of the oceanographic, geochemical, ecological and sedimentological characteristics of estuaries and coastal seas. Locating potential hazards to submarine repositories by: Bibliographical search of accidents leading to the destruction of submarine structures by turbidity currents and other potentials; Review of turbidity currents. Consideration of environmental impact caused by submarine repositories: Logistics to minimize the environmental impacts in site selection; Removal and dispersion processes of radionuclides in sea water. Analyses of oceanographical characteristics of, and hazard potentials in, the Korean seas. Evaluation of the MOST 91-7 criteria for applicability to submarine repositories and the subsequent proposition of additional criteria.

  15. Modeling and Analysis on Radiological Safety Assessment of Low- and Intermediate Level Radioactive Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn Myoung; Jung, Jong Tae; Kang, Chul Hyung (and others)

    2008-04-15

    Modeling study and analysis for technical support for the safety and performance assessment of the low- and intermediate level (LILW) repository partially needed for radiological environmental impact reporting which is essential for the licenses for construction and operation of LILW has been fulfilled. Throughout this study such essential area for technical support for safety and performance assessment of the LILW repository and its licensing as gas generation and migration in and around the repository, risk analysis and environmental impact during transportation of LILW, biosphere modeling and assessment for the flux-to-dose conversion factors for human exposure as well as regional and global groundwater modeling and analysis has been carried out.

  16. Report on Intact and Degraded Criticality for Selected Plutonium Waste Forms in a Geologic Repository, Volume I: MOX SNF

    Energy Technology Data Exchange (ETDEWEB)

    J.A. McClure

    1998-09-21

    As part of the plutonium waste form development and down-select process, repository analyses have been conducted to evaluate the long-term performance of these forms for repository acceptance. Intact and degraded mode criticality analysis of the mixed oxide (MOX) spent fuel is presented in Volume I, while Volume II presents the evaluations of the waste form containing plutonium immobilized in a ceramic matrix. Although the ceramic immobilization development program is ongoing, and refinements are still being developed and evaluated, this analysis provides value through quick feed-back to this development process, and as preparation for the analysis that will be conducted starting in fiscal year (FY) 1999 in support of the License Application. While no MOX fuel has been generated in the United States using weapons-usable plutonium, Oak Ridge National Laboratory (ORNL) has conducted calculations on Westinghouse-type reactors to determine the expected characteristics of such a fuel. These spent nuclear fuel (SNF) characteristics have been used to determine the long-term potential for criticality in a repository environment. In all instances the methodology and scenarios used in these analyses are compatible with those developed and used for Commercial Spent Nuclear Fuel (CSNF) and Defense High Level Waste (DHLW), as tailored for the particular characteristics of the waste forms. This provides a common basis for comparison of the results. This analysis utilizes dissolution, solubility, and thermodynamic data that are currently available. Additional data on long-term behavior is being developed, and later analyses (FY 99) to support the License Application will use the very latest information that has been generated. Ranges of parameter values are considered to reflect sensitivity to uncertainty. Most of the analysis is focused on those parameter values that produce the worst case results, so that potential licensing issues can be identified.

  17. DISPERSION AND SORPTION CHARACTERISTICS OF URANIUM IN THE ZEOLITE-QUARTZ MIXTURE AS BACKFILL MATERIAL IN THE RADIOACTIVE WASTE REPOSITORY

    Directory of Open Access Journals (Sweden)

    Herry Poernomo

    2010-06-01

    Full Text Available The experiment of sorption and dispersion characteristics of uranium in the zeolite-quartz mixture as candidate of raw material of backfill material in the radioactive waste repository has been performed. The objective is to know the effect of zeolite and quartz grain size on the zeolite-to-quartz weight ratio that gives porosity (ε, permeability (K, and dispersivity (α of uranium in the zeolite-quartz mixture as backfill material. The experiment was carried out by fixed bed method in the column filled by the zeolite-quartz mixture with zeolite-to-quartz weight percent ratio of 100/0, 80/20, 60/40, 40/60, 20/80, 0/100 wt. % in the water saturated condition flowed by uranyl nitrate solution of 500 ppm concentration (Co as uranium simulation which was leached from immobilized radioactive waste in the repository. The concentration of uranium in the effluents represented as Ct were analyzed by spectrophotometer Corning Colorimeter 253 every 15 minutes, then using Co and Ct uranium dispersivity (α in the backfill material was determined. The experiment data shown that 0.196 mm particle size of zeolite and 0.116 mm particle size of quartz on the zeolite-to-quartz weight ratio of 60/40 wt. % with ε = 0.678, K = 3.345x10-4 cm/second, and α = 0.759 cm can be proposed as candidate of raw material of backfill material in the radioactive waste repository.   Keywords: backfill material, quartz, radioactive waste, zeolite

  18. Selection of candidate container materials for the conceptual waste package design for a potential high level nuclear waste repository at Yucca Mountain

    Energy Technology Data Exchange (ETDEWEB)

    Van Konynenburg, R.A.; Halsey, W.G.; McCright, R.D.; Clarke, W.L. Jr. [Lawrence Livermore National Lab., CA (United States); Gdowski, G.E. [KMI, Inc., Albuquerque, NM (United States)

    1993-02-01

    Preliminary selection criteria have been developed, peer-reviewed, and applied to a field of 41 candidate materials to choose three alloys for further consideration during the advanced conceptual design phase of waste package development for a potential high level nuclear waste repository at Yucca Mountain, Nevada. These three alloys are titanium grade 12, Alloy C-4, and Alloy 825. These selections are specific to the particular conceptual design outlined in the Site Characterization Plan. Other design concepts that may be considered in the advanced conceptual design phase may favor other materials choices.

  19. Application of EQ3/6 to modeling of nuclear waste glass behavior in a tuff repository

    Energy Technology Data Exchange (ETDEWEB)

    Aines, R.D.

    1986-05-01

    Modeling of glass degradation based on sound geochemical principles appears to be possible with revisions to EQ3/6. Realistic source terms for several repository scenarios may be generated with such a model. One scenario which appears very likely and which is also amenable to modeling using EQ3/6 is that in which an intact but perforated canister holds water in contact with waste glass. The water overflows continuously or periodically, allowing radionuclides to come in contact with repository rock. This isolated-type scenario will be the first realistic modeling effort because it limits complex interactions between rock and glass. However, EQ3/6 modeling should be possible even for very complicated scenarios if sufficient experimental data are available on rates and thermodynamics. This will be the limiting factor in progress toward modeling the complete system.

  20. AN EVALUATION OF HYDROGEN INDUCED CRACKING SUSCEPTIBILITY OF TITANIUM ALLOYS IN US HIGH-LEVEL NUCLEAR WASTE REPOSITORY ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    G. De; K. Mon; G. Gordon; D. Shoesmith; F. Hua

    2006-02-21

    This paper evaluates hydrogen-induced cracking (HIC) susceptibility of titanium alloys in environments anticipated in the Yucca Mountain nuclear waste repository with particular emphasis on the. effect of the oxide passive film on the hydrogen absorption process of titanium alloys being evaluated. The titanium alloys considered in this review include Ti 2, 5 , 7, 9, 11, 12, 16, 17, 18, 24 and 29. In general, the concentration of hydrogen in a titanium alloy can increase due to absorption of atomic hydrogen produced from passive general corrosion of that alloy or galvanic coupling of it to a less noble metal. It is concluded that under the exposure conditions anticipated in the Yucca Mountain repository, the HIC of titanium drip shield will not occur because there will not be sufficient hydrogen in the metal even after 10,000 years of emplacement. Due to the conservatisms adopted in the current evaluation, this assessment is considered very conservative.

  1. Some Materials Degradation Issues in the U.S. High-Level Nuclear Waste Repository Study (The Yucca Mountain Project)

    Energy Technology Data Exchange (ETDEWEB)

    F. Hua; P. Pasupathi; N. Brown; K. Mon

    2005-09-19

    The safe disposal of radioactive waste requires that the waste be isolated from the environment until radioactive decay has reduced its toxicity to innocuous levels for plants, animals, and humans. All of the countries currently studying the options for disposing of high-level nuclear waste (HLW) have selected deep geologic formations to be the primary barrier for accomplishing this isolation. In U.S.A., the Nuclear Waste Policy Act of 1982 (as amended in 1987) designated Yucca Mountain in Nevada as the potential site to be characterized for high-level nuclear waste (HLW) disposal. Long-term containment of waste and subsequent slow release of radionuclides into the geosphere will rely on a system of natural and engineered barriers including a robust waste containment design. The waste package design consists of a highly corrosion resistant Ni-based Alloy 22 cylindrical barrier surrounding a Type 316 stainless steel inner structural vessel. The waste package is covered by a mailbox-shaped drip shield composed primarily of Ti Grade 7 with Ti Grade 24 structural support members. The U.S. Yucca Mountain Project has been studying and modeling the degradation issues of the relevant materials for some 20 years. This paper reviews the state-of-the-art understanding of the degradation processes based on the past 20 years studies on Yucca Mountain Project (YMP) materials degradation issues with focus on interaction between the in-drift environmental conditions and long-term materials degradation of waste packages and drip shields within the repository system during the 10,000 years regulatory period. This paper provides an overview of the current understanding of the likely degradation behavior of the waste package and drip shield in the repository after the permanent closure of the facility. The degradation scenario discussed in this paper include aging and phase instability, dry oxidation, general and localized corrosion, stress corrosion cracking and hydrogen induced

  2. Problem trap final repository. Social challenges concerning nuclear waste; Problemfalle Endlager. Gesellschaftliche Herausforderungen im Umgang mit Atommuell

    Energy Technology Data Exchange (ETDEWEB)

    Brunnengraeber, Achim (ed.)

    2016-07-01

    How is it possible that there is still no final storage facility in the entire world for highly radioactive waste from nuclear power stations? How is it possible that electricity has been generated by industrial-scale nuclear installations for decades without the issue of the disposal of nuclear waste having been resolved? The events in Chernobyl in 1986 and Fukushima in 2011 have made it blatantly obvious how risky this technology is and how important it is to keep humans and the environment at a safe distance from radioactivity. This anthology examines the technological, political, social and economic dimensions of the permanent disposal of nuclear waste. It provides an insight into the emergence of the problem and the people involved and their interests. It describes and analyses the changes that are taking place in Germany (for instance, in relation to the government's commission on nuclear repositories) and other countries with regard to how they handle nuclear waste. The book deals with both questions related to socio-technical aspects of the permanent disposal of nuclear waste and calls for the democratic need for participation and new ways of doing so, without which the search for a permanent disposal site will not bear fruit. This anthology presents a comprehensive discussion of the disposal of nuclear waste and the search for a permanent repository for it. Not only will students and teachers find it extremely useful, but so will any readers who are interested in its subject matter and wish to gain a more in-depth insight into it.

  3. Radioactive waste isolation in salt: Peer review of the Fluor Technology, Inc. , report and position paper concerning waste emplacement mode and its effect on repository conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Hambley, D.F.; Russell, J.E.; Whitfield, R.G.; McGinnis, L.D.; Harrison, W.; Jacoby, C.H.; Bump, T.R.; Mraz, D.Z.; Busch, J.S.; Fischer, L.E.

    1987-02-01

    Recommendations for revising the Fluor Technology, Inc., draft position paper entitled Evaluation of Waste Emplacement Mode and the final report entitled Waste Package/Repository Impact Study include: reevaluate the relative rankings for the various emplacement modes; delete the following want objectives: maximize ability to locate the package horizon because sufficient flexibility exists to locate rooms in the relatively clean San Andres Unit 4 Salt and maximize far-field geologic integrity during retrieval because by definition the far field will be unaffected by thermal and stress perturbations caused by remining; give greater emphasis to want objectives regarding cost and use of present technology; delete the following statements from pages 1-1 and 1-2 of the draft position paper: ''No thought or study was given to the impacts of this configuration (vertical emplacement) on repository construction or short and long-term performance of the site'' and ''Subsequent salt repository designs adopted the vertical emplacement configuration as the accepted method without further evaluation.''; delete App. E and lines 8-17 of page 1-4 of the draft position paper because they are inappropriate; adopt a formal decision-analysis procedure for the 17 identified emplacement modes; revise App. F of the impact study to more accurately reflect current technology; consider designing the underground layout to take advantage of stress-relief techniques; consider eliminating reference to fuel assemblies <10 yr ''out-of-reactor''; model the temperature distribution, assuming that the repository is constructed in an infinitely large salt body; state that the results of creep analyses must be considered tentative until they can be validated by in situ measurements; and reevaluate the peak radial stresses on the waste package so that the calculated stress conditions more closely approximate expected in situ conditions.

  4. The use of the virtual reality Helmet Samsung gear VR as interaction interface of a radioactive waste repository simulator

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Julio A. dos; Mól, Antônio C. de A.; Santo, André C. Do E., E-mail: julio_andrade11@hotmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Centro Universitário Carioca (UniCarioca), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    Radioactive waste is all material resulting from human activity that contains elements that emit radiation that can generate risks to health and the environment. In this sense, they are very toxic also for those who perform the storage of radioactive waste in nuclear facilities. On the other hand, the virtual reality (VR) has been destined to the most diverse purposes, like simulations for educational systems, for military purposes as for diverse training. VR can be considered as the junction of three basic principles: immersion, interaction and involvement. Bases on these principles of VR, this work aimed to develop a simulator of a repository of nuclear tailings, for mobile computing, whose interaction interface will be through the Samsung Gear VR helmet. The simulator of the nuclear waste repository was developed in the unity 3D tool and the elements that make up the scenario in the 3D MAX program. In this work we tried to put virtual reality under scrutiny in conjunction with Gear VR, to help in the sensation of immersion, as well as, the possibility of interaction with joysticks. The purpose was to provide greater insight into the operating environment. (author)

  5. ONE – STAGE METAL WASTES RECYCLING

    Directory of Open Access Journals (Sweden)

    S. L. Rovin

    2011-01-01

    Full Text Available Rotary tilting furnace is the most efficient installation for recycling of dispersible metal wastes of any alloy. Several constructions have been designed for chips heating and melting, scale recovery, ets.

  6. Nye County Nuclear Waste Repository Project Office independent scientific investigations program annual report, May 1997--April 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    This annual summary report, prepared by the Nye County Nuclear Waste Repository Project Office (NWRPO), summarizes the activities that were performed during the period from May 1, 1997 to April 30, 1998. These activities were conducted in support of the Independent Scientific Investigation Program (ISIP) of Nye County at the Yucca Mountain Site (YMS). The Nye County NWRPO is responsible for protecting the health and safety of the Nye County residents. NWRPO`s on-site representative is responsible for designing and implementing the Independent Scientific Investigation Program (ISIP). Major objectives of the ISIP include: Investigating key issues related to conceptual design and performance of the repository that can have major impact on human health, safety, and the environment; identifying areas not being addressed adequately by the Department of Energy (DOE). Nye County has identified several key scientific issues of concern that may affect repository design and performance which were not being adequately addressed by DOE. Nye County has been conducting its own independent study to evaluate the significance of these issues. This report summarizes the results of monitoring from two boreholes and the Exploratory Studies Facility (ESF) tunnel that have been instrumented by Nye County since March and April of 1995. The preliminary data and interpretations presented in this report do not constitute and should not be considered as the official position of Nye County. The ISIP presently includes borehole and tunnel instrumentation, monitoring, data analysis, and numerical modeling activities to address the concerns of Nye County.

  7. Review of scenario selection approaches for performance assessment of high-level waste repositories and related issues.

    Energy Technology Data Exchange (ETDEWEB)

    Banano, E.J. [Beta Corporation International, Albuquerque, NM (United States); Baca, R.G. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1995-08-01

    The selection of scenarios representing plausible realizations of the future conditions-with associated probabilities of occurrence-that can affect the long-term performance of a high-level radioactive waste (HLW) repository is the commonly used method for treating the uncertainty in the prediction of the future states of the system. This method, conventionally referred to as the ``scenario approach,`` while common is not the only method to deal with this uncertainty; other method ``ch as the environmental simulation approach (ESA), have also been proposed. Two of the difficulties with the scenario approach are the lack of uniqueness in the definition of the term ``scenario`` and the lack of uniqueness in the approach to formulate scenarios, which relies considerably on subjective judgments. Consequently, it is difficult to assure that a complete and unique set of scenarios can be defined for use in a performance assessment. Because scenarios are key to the determination of the long-term performance of the repository system, this lack of uniqueness can present a considerable challenge when attempting to reconcile the set of scenarios, and their level of detail, obtained using different approaches, particularly among proponents and regulators of a HLW repository.

  8. State-of-the-art for evaluating the potential impact of tectonism and volcanism on a radioactive waste repository

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-16

    Most estimates of the time required for safe isolation of radioactive wastes from the biosphere range from 100,000 to 1,000,000 years. For such long time spans, it is necessary to assess the potential effects of geologic processes such as volcanism and tectonic activity on the integrity of geologic repositories. Predictions of geologic phenomena can be based on probabilistic models, which assume a random distribution of events. The necessary historic and geologic records are rarely available to provide an adequate data base for such predictions. The observed distribution of volcanic and tectonic activity is not random, and appears to be controlled by extremely complex deterministic processes. The advent of global plate tectonic theory in the past two decades has been a giant step toward understanding these processes. At each potential repository site, volcanic and tectonic processes should be evaluated to provide the most thorough possible understanding of those deterministic processes. Based on this knowledge, judgements will have to be made as to whether or not the volcanic and tectonic processes pose unacceptable risk to the integrity of the repository. This report describes the potential hazards associated with volcanism and tectonism, and the means for evaluating these processes.

  9. Need for USA high level waste (HLW) alternate geological repository (AGR) and for a different methodology to enhance its acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Levy, Salomon, E-mail: slevy112@aol.co [3425 South Bascom Avenue, Suite 225, Campbell, CA 95008 (United States)

    2010-10-15

    In early February 2010, the administration stopped work and withdrew the Department of Energy (DOE) application for a construction permit for the Yucca Mountain geological repository from the Nuclear Regulatory Commission (NRC). Also, a 'blue ribbon' Commission was appointed to explore alternatives for storage, processing, and disposal, including evaluation of advanced fuel cycles and to provide a final report in 24 months. That decision, however, failed to recognize that: (1) the U.S. will need an early alternate geological repository (AGR) for its HLW irrespective of the findings of the 'blue ribbon' Commission; (2) the once-through spent fuel inventory from commercial nuclear power reactors will continue to rise and so will the damages against the government for its failure to remove spent fuel from reactors sites, as specified in contracts; (3) there are prepackaged DOE and nuclear weapons HLW ready for shipment to a repository which must be taken into account because of government penalties for failure to do so; (4) the current Nuclear Waste Policy Act (NWPA) needs to be modified to allow the early search and approval of Alternate Geological Repository (AGR) and for an interim centralized HLW storage facility to reduce government liabilities; and (5) the methodology used to license Yucca Mountain needs to undergo serious modifications, including a different non-politicized management and siting credo. This paper reviews and discusses all the preceding shortcomings and proposes significant changes to pursue AGR as soon as possible and to get site approval by the NRC first under a formal, stepwise, well-structured risk-informed decision approach as recommended.

  10. Salton Sea Geothermal Field, California, as a near-field natural analog of a radioactive waste repository in salt

    Energy Technology Data Exchange (ETDEWEB)

    Elders, W.A.; Cohen, L.H.

    1983-11-01

    Since high concentrations of radionuclides and high temperatures are not normally encountered in salt domes or beds, finding an exact geologic analog of expected near-field conditions in a mined nuclear waste repository in salt will be difficult. The Salton Sea Geothermal Field, however, provides an opportunity to investigate the migration and retardation of naturally occurring U, Th, Ra, Cs, Sr and other elements in hot brines which have been moving through clay-rich sedimentary rocks for up to 100,000 years. The more than thirty deep wells drilled in this field to produce steam for electrical generation penetrate sedimentary rocks containing concentrated brines where temperatures reach 365/sup 0/C at only 2 km depth. The brines are primarily Na, K, Ca chlorides with up to 25% of total dissolved solids; they also contain high concentrations of metals such as Fe, Mn, Li, Zn, and Pb. This report describes the geology, geophysics and geochemistry of this system as a prelude to a study of the mobility of naturally occurring radionuclides and radionuclide analogs within it. The aim of this study is to provide data to assist in validating quantitative models of repository behavior and to use in designing and evaluating waste packages and engineered barriers. 128 references, 33 figures, 13 tables.

  11. Selected Models for Key Processes in a Nuclear Waste Repository Temperature field - Bentonite drying/resaturation

    Energy Technology Data Exchange (ETDEWEB)

    Claesson, Johan (Chalmers Univ. of Technology, Goeteborg (Sweden))

    2007-12-15

    The bentonite, which surrounds and protects the canisters in a nuclear waste repository deep down in rock, experiences a complex, coupled heat and moisture flow process. The emitted heat from the canisters will cause an initial drying from the warmer canister side. The water in cracks and fractures in the rock will on the other hand cause successive saturation of the bentonite from the outer rock side, These processes will interact and one key question is the degree of initial drying and the time it takes to saturate the bentonite. This paper studies this problem and presents new handy tools of analysis. A compact formula for the temperature level and gradient in the bentonite is presented. The key radial moisture flow process around a canister is shown to be governed by two flow coefficient functions. These depend on water and bentonite properties in a rather complicated way, but they are determined quite handily by one of the models. The moisture flow may have a time scale of a few years, while the canister heat emission and temperature process involve a time scale of decades. Steady-state solutions are therefore of interest. One model solves the general case of coupled nonlinear differential equations for water saturation S(r) and temperature T(r) . An analysis of the equations shows that there is a direct relation between S and T, with the initial degree of saturation as a parameter. We get a set of curves that gives the (steady-state) drying for any temperature level, canister heat emission, and water saturation level. These very instructive diagrams are generated for any set of data in a few seconds. The second part of the analysis concerns the transient moisture flow process. There are two limits. In the wet-rock case, full saturation (S = 1) is maintained at the rock boundary. The moisture flux is zero at the rock boundary in the dry-rock case. The equation for the water saturation S(r,f) involves two free flow coefficient functions which are functions of S

  12. Repository performance confirmation.

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Francis D.

    2011-09-01

    Repository performance confirmation links the technical bases of repository science and societal acceptance. This paper explores the myriad aspects of what has been labeled performance confirmation in U.S. programs, which involves monitoring as a collection of distinct activities combining technical and social significance in radioactive waste management. This paper is divided into four parts: (1) A distinction is drawn between performance confirmation monitoring and other testing and monitoring objectives; (2) A case study illustrates confirmation activities integrated within a long-term testing and monitoring strategy for Yucca Mountain; (3) A case study reviews compliance monitoring developed and implemented for the Waste Isolation Pilot Plant; and (4) An approach for developing, evaluating and implementing the next generation of performance confirmation monitoring is presented. International interest in repository monitoring is exhibited by the European Commission Seventh Framework Programme 'Monitoring Developments for Safe Repository Operation and Staged Closure' (MoDeRn) Project. The MoDeRn partners are considering the role of monitoring in a phased approach to the geological disposal of radioactive waste. As repository plans advance in different countries, the need to consider monitoring strategies within a controlled framework has become more apparent. The MoDeRn project pulls together technical and societal experts to assimilate a common understanding of a process that could be followed to develop a monitoring program. A fundamental consideration is the differentiation of confirmation monitoring from the many other testing and monitoring activities. Recently, the license application for Yucca Mountain provided a case study including a technical process for meeting regulatory requirements to confirm repository performance as well as considerations related to the preservation of retrievability. The performance confirmation plan developed as part

  13. SORPTION AND DISPERSION OF STRONTIUM RADIONUCLIDE IN THE BENTONITE-QUARTZ-CLAY AS BACKFILL MATERIAL CANDIDATE ON RADIOACTIVE WASTE REPOSITORY

    Directory of Open Access Journals (Sweden)

    Herry Poernomo

    2010-12-01

    Full Text Available The experiment of sorption and dispersion characteristics of strontium in the mixture of bentonite-quartz, clay-quartz, bentonite-clay-quartz as candidate of raw material for backfill material in the radioactive waste repository has been performed. The objective of this research is to know the grain size effect of bentonite, clay, and quartz on the weight percent ratio of bentonite to quartz, clay to quartz, bentonite to clay to-quartz can be gives physical characteristics of best such as bulk density (rb, effective porosity (e, permeability (K, best sorption characteristic such as distribution coefficient (Kd, and best dispersion characteristics such as dispersivity (a and effective dispersion coefficient (De of strontium in the backfill material candidate. The experiment was carried out in the column filled by the mixture of bentonite-quartz, clay-quartz, bentonite-clay-quartz with the weight percent ratio of bentonite to quartz, clay to quartz, bentonite to clay to quartz of 100/0, 80/20, 60/40, 40/60, 20/80, 0/100 respectively at saturated condition of water, then flowed 0.1 N Sr(NO32 as buffer solution with tracer of 0.05 Ci/cm3 90Sr as strontium radionuclide simulation was leached from immobilized radioactive waste in the radioactive waste repository. The concentration of 90Sr in the effluents represented as Ct were analyzed by Ortec b counter every 30 min, then by using profile concentration of Co and Ct, values of Kd, a and De of 90Sr in the backfill material was determined. The experiment data showed that the best results were -80+120 mesh grain size of bentonite, clay, quartz respectively on the weight percent ratio of bentonite to clay to quartz of 70/10/20 with physical characteristics of rb = 0.658 g/cm3, e = 0.666 cm3/cm3, and K = 1.680x10-2 cm/sec, sorption characteristic of Kd = 46.108 cm3/g, dispersion characteristics of a = 5.443 cm, and De = 1.808x10-03 cm2/sec can be proposed as candidate of raw material of backfill material

  14. Experiences from risk communication in the siting of a geological repository for high level waste in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Thegerstroem, C.; Engstroem, S. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    1999-12-01

    SKB is planning in the year 2001 to designate two siting alternatives for further site characterisation. The work in the municipalities of Oesthammar, Nykoeping, Oskarshamn and Tierp is taking place in an atmosphere of constructive discussions. There is a growing feeling in Sweden among broad categories of the public that the nuclear waste exists and should be taken care of by our generation, without many of these people ever getting positive to the use of nuclear energy. While the NIMBY syndrome might still have a good grip on some, there has never been a more constructive debate about the nuclear waste than now, even though there still is a lot of work to do. Siting a geological repository for high level waste puts our democratic system under hard tests. The decision making process is about openness, skills in interacting with the public, respect of people's fears and concerns and at last but not the least independent, competent and visible participation by other stakeholders (politicians locally and nationally, regulatory bodies etc). Good skills in risk communication are important ingredients that might facilitate SKB's task as a developer. Far more important however, is the trust we might get from past and present record of handling the waste and from the way we work and behave in the feasibility studies in the municipalities where SKB is involved.

  15. Management Plan for the Development of the License Application for a High Level Waste Repository at Yucca Mountain, Rev. 0

    Energy Technology Data Exchange (ETDEWEB)

    Brocoum, Stephan J.

    1997-01-10

    If the Yucca Mountain Site is recommended and approved for development as a repository, the U.S. Department of Energy (DOE) plans to file a License Application (LA) with the U.S. Nuclear Regulatory Commission (NRC) pursuant to 10 CFR 60, Disposal of High-Level Radioactive Wastes in Geologic Repositories. The NRC, in accordance with 10 CFR 60, will evaluate DOE's application and adopt, to the extent practicable, the accompanying Environmental Impact Statement (EIS), in connection with the issuance of an authorization to construct the proposed geologic repository. The NRC can issue a license to DOE under 10 CFR 60 only after construction of the geologic repository operations area is substantially complete and the initial LA has been updated in accordance with 10 CFR 60.24. In accordance with the Energy Policy Act of 1992, the NRC is, by rule, to modify its technical requirements and criteria as necessary to be consistent with the U.S. Environmental Protection Agency's new site-specific standards. The NRC staff has proposed to achieve this by drafting a new, separate, site-specific part of the Code of Federal Regulations to be promulgated as 10 CFR 63. While adopting the definitions, administrative, preclosure, retrievability, and quality assurance portions of 10 CFR 60, the NRC staff's proposal for this new part would focus on total-system performance and place no quantitative requirements on the performance of individual subsystems or their components. When the NRC issues a final rule, the DOE will modify its licensing strategy and LA development efforts to conform to the new requirements. Until that time, the applicable repository licensing requirements are those in 10 CFR 60, and the DOE will continue to plan to these requirements. DOE management will, as deemed appropriate, undertake activities to prepare for the eventual issuance of new regulations. The first draft of the LA may be developed to show compliance with the draft regulations prepared

  16. A Review Corrosion of TI Grade 7 and Other TI Alloys in Nuclear Waste Repository Environments

    Energy Technology Data Exchange (ETDEWEB)

    F. Hua; K. Mon; P. Pasupathi; G. Gordon

    2004-05-11

    Titanium alloy degradation modes are reviewed in relation to their performance in repository environments. General corrosion, localized corrosion, stress corrosion cracking, hydrogen induced cracking, microbially influenced corrosion, and radiation-assisted corrosion of Ti alloys are considered. With respect to the Ti Grade 7 drip shields selected for emplacement in the repository at Yucca Mountain, general corrosion, hydrogen induced cracking, and radiation-assisted corrosion will not lead to failure within the 10,000 year regulatory period; stress corrosion cracking (in the absence of disruptive events) is of no consequence to barrier performance; and localized corrosion and microbially influenced corrosion are not expected to occur. To facilitate the discussion, Ti Grades 2, 5, 7, 9, 11, 12, 16, 17, 18, and 24 are included in this review.

  17. The Danish inventory of radioactive waste and the required repository type

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Gerhard [Oeko-Institut e.V., Darmstadt (Germany). Div. on Nuclear Engineering and Facility Safety

    2014-11-15

    Denmark has a relatively small inventory of radioactive wastes. As Denmark never built and operated nuclear power plants, the wastes resulted only from various research activities. In order to manage those wastes, the Danish Government has ordered to describe those wastes and the available management options. Based on vague criteria, most of the waste types were termed as ''short-lived'' and as suitable for a surface-near disposal facility. The Government then ordered the Geological survey organization of Denmark, GEUS, to scan Denmark for suitable locations. ''Suitable'' depth was defined as 0 to 100 m below ground. Neither were isolation properties or other requirements for geological layers defined nor were those criteria agreed in a broader sense (with experts, with the public). GEUS identified a number of potentially suitable locations and selected six of those as the most promising. In this paper the basic decision of preferring surface-near disposal for most of the waste types is analysed. As a central criterion for the suitability of the waste types for surface-near disposal is defined that those waste types decay within 300 years to below today's clearance levels. The results show, that none of the Danish types of waste meets this simple requirement. All are above that criterion, most of them by several orders of magnitude and over very much longer times such as 100.000 years or even longer. The basic assumption of the performed site selection procedure, to search for near-surface locations for short-lived wastes, so proves to be invalid. The whole process should be re-done on the basis that the long-term isolation of those wastes in impermeable layers has to be guaranteed. The suitability criteria should focus on the long-term isolation of all wastes and should be agreed in advance.

  18. Yucca Mountain, Nevada - A Proposed Geologic Repository for High-Level Radioactive Waste (Volume 1) Introduction

    Energy Technology Data Exchange (ETDEWEB)

    R.A. Levich; J.S. Stuckless

    2006-09-25

    Yucca Mountain in Nevada represents the proposed solution to what has been a lengthy national effort to dispose of high-level radioactive waste, waste which must be isolated from the biosphere for tens of thousands of years. This chapter reviews the background of that national effort and includes some discussion of international work in order to provide a more complete framework for the problem of waste disposal. Other chapters provide the regional geologic setting, the geology of the Yucca Mountain site, the tectonics, and climate (past, present, and future). These last two chapters are integral to prediction of long-term waste isolation.

  19. State-of-the-art for evaluating the potential effects of erosion and deposition on a radioactive waste repository. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-16

    The potential impact of future geologic processes on the integrity of a deep, high-level radioactive-waste repository is evaluated. The following study identifies the potential consequences of surface erosion and deposition on sub-surface repository containment characteristics and assesses the ability to measure and predict quantitatively the rates and corresponding extent of these processes in the long term. Numerous studies of the magnitudes and rates of surficial erosion and deposition that have been used to determine the minimum allowable depth for a geologic repository (300 m - NRC Code of Federal Regulations, Part 60.122, Draft 10) are cited in this report. Measurement and interpretation of potential rates and extent of surficial processes in these studies involved considerable uncertainty, and the implications of this uncertainty on presently proposed repository siting criteria are addressed herein. Important concepts that should be considered when developing siting criteria to protect against deleterious effects arising from future erosion or deposition are highlighted. Erosion agents that could affect deep repositories are distinguished in this report so that their individual and combined impacts may be examined. This approach is recommended when evaluating potential repository sites in diverse environments that are susceptible to different agents of erosion. In contrast, agents of sedimentation are not differentiated in this report because of their relatively minor impact on a deep repository.

  20. National survey of crystalline rocks and recommendations of regions to be explored for high-level radioactive waste repository sites

    Energy Technology Data Exchange (ETDEWEB)

    Smedes, H.W.

    1983-04-01

    A reconnaissance of the geological literature on large regions of exposed crystalline rocks in the United States provides the basis for evaluating if any of those regions warrant further exploration toward identifying potential sites for development of a high-level radioactive waste repository. The reconnaissance does not serve as a detailed evaluation of regions or of any smaller subunits within the regions. Site performance criteria were selected and applied insofar as a national data base exists, and guidelines were adopted that relate the data to those criteria. The criteria include consideration of size, vertical movements, faulting, earthquakes, seismically induced ground motion, Quaternary volcanic rocks, mineral deposits, high-temperature convective ground-water systems, hydraulic gradients, and erosion. Brief summaries of each major region of exposed crystalline rock, and national maps of relevant data provided the means for applying the guidelines and for recommending regions for further study. It is concluded that there is a reasonable likelihood that geologically suitable repository sites exist in each of the major regions of crystalline rocks. The recommendation is made that further studies first be conducted of the Lake Superior, Northern Appalachian and Adirondack, and the Southern Appalachian Regions. It is believed that those regions could be explored more effectively and suitable sites probably could be found, characterized, verified, and licensed more readily there than in the other regions.

  1. Death Valley Lower Carbonate Aquifer Monitoring Program Wells Down gradient of the Proposed Yucca Mountain Nuclear Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Inyo County

    2006-07-26

    Inyo County has participated in oversight activities associated with the Yucca Mountain Nuclear Waste Repository since 1987. The overall goal of these studies are the evaluation of far-field issues related to potential transport, by ground water, or radionuclides into Inyo County, including Death Valley, and the evaluation of a connection between the Lower Carbonate Aquifer (LCA) and the biosphere. Our oversight and completed Cooperative Agreement research, and a number of other investigators research indicate that there is groundwater flow between the alluvial and carbonate aquifers both at Yucca Mountain and in Inyo County. In addition to the potential of radionuclide transport through the LCA, Czarnecki (1997), with the US Geological Survey, research indicate potential radionuclide transport through the shallower Tertiary-age aquifer materials with ultimate discharge into the Franklin Lake Playa in Inyo County. The specific purpose of this Cooperative Agreement drilling program was to acquire geological, subsurface geology, and hydrologic data to: (1) establish the existence of inter-basin flow between the Amargosa Basin and Death Valley Basin; (2) characterize groundwater flow paths in the LCA through Southern Funeral Mountain Range, and (3) Evaluation the hydraulic connection between the Yucca Mountain repository and the major springs in Death Valley through the LCA.

  2. Risk perception, risk evaluation and human values: cognitive bases of acceptability of a radioactive waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Earle, T.C.; Lindell, M.K.; Rankin, W.L.

    1981-07-01

    Public acceptance of radioactive waste management alternatives depends in part on public perception of the associated risks. Three aspects of those perceived risks were explored in this study: (1) synthetic measures of risk perception based on judgments of probability and consequences; (2) acceptability of hypothetical radioactive waste policies, and (3) effects of human values on risk perception. Both the work on synthetic measures of risk perception and on the acceptability of hypothetical policies included investigations of three categories of risk: (1) Short-term public risk (affecting persons living when the wastes are created), (2) Long-term public risk (affecting persons living after the time the wastes were created), and (3) Occupational risk (affecting persons working with the radioactive wastes). The human values work related to public risk perception in general, across categories of persons affected. Respondents were selected according to a purposive sampling strategy.

  3. Mega-conflict project and social complexity - Illustrated by the decision-making on locating a radioactive waste repository in Denmark

    DEFF Research Database (Denmark)

    Kørnøv, Lone; Lyhne, Ivar; Larsen, Sanne Vammen

    2018-01-01

    a proposal for an interim deposit, strategic environmental assessment and hearings, the process has not led to a final political decision. This paper explores the decision-making process of site identification, site selection process and choice of technology for storing nuclear waste in Denmark. The paper......The deposit of radioactive waste is a complex policy problem and a socio-technical challenge with potentially large societal impacts and a very large time horizon. These characteristics are also found in the Danish decision-making process regarding future management of radioactive waste....... The process was formally initiated in 2003 when the Danish Parliament gave consent for the government to start preparing a basis for deciding a final repository for Denmark’s low- and intermediate level radioactive waste. After preliminary studies, proposal for a plan for a final repository – and later also...

  4. Report to Congress on the potential use of lead in the waste packages for a geologic repository at Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-12-01

    In the Report of the Senate Committee on Appropriations accompanying the Energy and Water Appropriation Act for 1989, the Committee directed the Department of Energy (DOE) to evaluate the use of lead in the waste packages to be used in geologic repositories for spent nuclear fuel and high-level waste. The evaluation that was performed in response to this directive is presented in this report. This evaluation was based largely on a review of the technical literature on the behavior of lead, reports of work conducted in other countries, and work performed for the waste-management program being conducted by the DOE. The initial evaluation was limited to the potential use of lead in the packages to be used in the repository. Also, the focus of this report is post closure performance and not on retrievability and handling aspects of the waste package. 100 refs., 8 figs., 15 tabs.

  5. Conservation and retrieval of information - Elements of a strategy to inform future societies about nuclear waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, M. [ed.] [National Inst. of Radiation Protection, Stockholm (Sweden)

    1996-12-01

    Two main strategies exist for long-term information transfer, one which links information through successive transfers of archived material and other forms of knowledge in society, and one - such as marking the site with a monument - relying upon a direct link from the present to the distant future. Digital methods are not recommended for long-term storage, but digital processing may be a valuable tool to structure information summaries, and in the creation of better long-lasting records. Advances in archive management should also be pursued to widen the choice of information carriers of high durability. In the Nordic countries, during the first few thousand years, and perhaps up to the next period of glaciation, monuments at a repository site may be used to warn the public of the presence of dangerous waste. But messages from such markers may pose interpretation problems as we have today for messages left by earlier societies such as rune inscriptions. Since the national borders may change in the time scale relevant for nuclear waste, the creation of an international archive for all radioactive wastes would represent an improvement as regards conservation and retrieval of information. (EG).

  6. Closure development for high-level nuclear waste containers for the tuff repository; Phase 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Robitz, E.S. Jr.; McAninch, M.D. Jr.; Edmonds, D.P. [Babcock and Wilcox Co., Lynchburg, VA (USA). Nuclear Power Div.]|[Babcock and Wilcox Co., Alliance, OH (USA). Research and Development Div.

    1990-09-01

    This report summarizes Phase 1 activities for closure development of the high-level nuclear waste package task for the tuff repository. Work was conducted under U.S. Department of Energy (DOE) Contract 9172105, administered through the Lawrence Livermore National Laboratory (LLNL), as part of the Yucca Mountain Project (YMP), funded through the DOE Office of Civilian Radioactive Waste Management (OCRWM). The goal of this phase was to select five closure processes for further evaluation in later phases of the program. A decision tree methodology was utilized to perform an objective evaluation of 15 potential closure processes. Information was gathered via a literature survey, industrial contacts, and discussions with project team members, other experts in the field, and the LLNL waste package task staff. The five processes selected were friction welding, electron beam welding, laser beam welding, gas tungsten arc welding, and plasma arc welding. These are felt to represent the best combination of weldment material properties and process performance in a remote, radioactive environment. Conceptual designs have been generated for these processes to illustrate how they would be implemented in practice. Homopolar resistance welding was included in the Phase 1 analysis, and developments in this process will be monitored via literature in Phases 2 and 3. Work was conducted in accordance with the YMP Quality Assurance Program. 223 refs., 20 figs., 9 tabs.

  7. Geotechnical and geological aspects for repository concepts with retrievability of radioactive waste; Geotechnische und geologische Aspekte fuer Tiefenlagerkonzepte mit der Option der Rueckholung der radioaktiven Reststoffe

    Energy Technology Data Exchange (ETDEWEB)

    Stahlmann, Joachim; Leon Vargas, Rocio; Mintzlaff, Volker [Technische Univ. Braunschweig (Germany). Inst. fuer Grundbau und Bodenmechanik

    2016-03-15

    The retrievability of heat-producing high-level radioactive waste (HAW) is on debate internationally as well as in Germany. This article deals with the geological and geotechnical consequences of the design of a repository with retrievability in different host rocks. The properties of rock salt, clay, shale and crystalline rock - potential host rocks for a repository with retrievability in Germany - will be presented. Based on these properties generic models of repositories with measurements for retrievability and monitoring will be also presented. With these models it can be derived that due the different stress-deformation-behavior there is a conflict of aims between the best possible closure of the waste and the option of retrieval.

  8. Representation of two-phase flow in the vicinity of the repository in the 1996 performance assessment for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    VAUGHN,PALMER; BEAN,J.E.; HELTON,JON CRAIG; LORD,MICHAEL E.; MACKINNON,ROBERT J.; SCHREIBER,JAMES D.

    2000-05-18

    The following topics related to the representation of two-phase (gas and brine) flow in the vicinity of the repository in the 1996 performance assessment (PA) for the Waste Isolation Pilot Plant (WIPP) are discussed: (1) system of nonlinear partial differential equations used to model two-phase flow, (2) incorporation of repository shafts into model (3) creep closure of repository. (4) interbed fracturing, (5) gas generation (6) capillary action in waste, (7) borebole model (8) numerical solution and (9) gas and brine flow across specified boundaries. Two-phase flow calculations are a central part of the 1996 WIPP PA and supply results that are subsequently used in the calculation of releases to the surface at the time of a drilling intrusion (i.e., spallings, direct brine releases) and long-term releases due to radionuclide transport by flowing groundwater.

  9. Sensitivity analysis on mechanical stability of the underground excavations for an high-level radioactive waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jeong Hwa; Kwon, Sang Ki; Choi, Jong Won; Kang, Chul Hyung

    2001-01-01

    For the safe design of an underground nuclear waste repository, it is necessary to investigate the influence of the major parameters on the tunnel stability. In this study, sensitivity analysis was carried out to find the major parameters on the mechanical stability point of view. Fourteen parameters consisted of 10 site parameters and 4 design parameters were included in the FLAC3D. From the numerical analyses employing single parameter variation, it was possible to determine important parameters. In order to investigate the interaction between the parameters, fractional factorial design for the parameters, such as in situ stress ratio, depth, tunnel dimensions, joint spacing, joint stiffness, friction angle, and rock strength, was carried out. And in order to investigate the interaction between design parameters, fractional factorial design for parameters, such as in situ stress, depth, tunnel size, tunnel spacing and borehole spacing, was carried out.

  10. Use of Geohydrologic Response Functions in the assessment of deep nuclear waste repositories: assessment of effectiveness of geologic isolation systems

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, R.W.

    1981-05-01

    Geohydrologic Response Functions (GRFs) interrelate the three vital factors needed in the repository decision-making process: the quantity, arrival time, and location of contamination reaching the biosphere. GRFs further focus attention upon two related and additive parameters: the initial delay time and delay spread time. After the principal site selection, the GRFs may be applied to obtain more detailed performance evaluations concerning specific nuclides or waste components, specific results for various types of accidental release, and effects of a variety of contaminant source terms or leach models. The response functions may be applied to consider contaminant reductions and delays through material sorption as well as through a variety of other interactions and effects.

  11. AN ANALYSIS OF THE THERMAL AND MECHANICAL BEHAVIOR OF ENGINEERED BARRIERS IN A HIGH-LEVEL RADIOACTIVE WASTE REPOSITORY

    Directory of Open Access Journals (Sweden)

    S. KWON

    2013-02-01

    Full Text Available Adequate design of engineered barriers, including canister, buffer and backfill, is important for the safe disposal of high-level radioactive waste. Three-dimensional computer simulations were carried out under different condition to examine the thermal and mechanical behavior of engineered barriers and rock mass. The research looked at five areas of importance, the effect of the swelling pressure, water content of buffer, density of compacted bentonite, emplacement type and the selection of failure criteria. The results highlighted the need to consider tensile stress in the outer shell of a canister due to thermal expansion of the canister and the swelling pressure from the buffer for a more reliable design of an underground repository system. In addition, an adequate failure criterion should be used for the buffer and backfill.

  12. Storage and release of radiation energy in salt in radioactive waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Jenks, G.H.; Bopp, C.D.

    1977-10-01

    The results showed that appreciable amounts of gamma-radiation energy can be stored under certain exposure conditions. The results also showed that thermally activated annealing takes place at elevated temperatures and that the rates of this annealing at temperatures above about 150/sup 0/C are such that negligible amounts of energy will be stored in salt in a repository where the salt is at temperatures above about 150/sup 0/C. We are not able to show that thermally activated annealing takes place in rock salt at temperatures below about 150/sup 0/C, although it may do so. There may also be some radiation-induced annealing. The results of measurements of energy stored at irradiation temperatures between 30 and 150/sup 0/C, together with results of theoretical considerations, showed that the maximum stored energy that would be formed in salt in a repository with no annealing whatsoever would be about 50 cal/g. We did not conceive a means by which the stored energy could be released abruptly, nor was any significant hazard believed to be possible from the release if it should occur abruptly by some unforeseen mechanism. In practice, salt temperatures below about 150/sup 0/C will occur only with isolated or semi-isolated canisters in a repository, or with most canisters, after very long times during which the gamma-dose rate will have dropped off markedly. Available evidence from thermal annealing observations and from calorimetric and dissolution measurements indicated that there were no significant losses of either chlorine or sodium during or after irradiation. One effect of the stored energy which must be accounted for in a safety analysis is the generation of H/sub 2/, which takes place upon aqueous dissolution of radiation-damaged salt; about 0.1 cm/sup 3/ of H/sub 2/ is generated per calorie of stored energy. However, we have not recognized any problems arising from this effect which cannot be counteracted by appropriate design and operation of the repository.

  13. Earthquake activity in Sweden. Study in connection with a proposed nuclear waste repository in Forsmark or Oskarshamn

    Energy Technology Data Exchange (ETDEWEB)

    Boedvarsson, Reynir; Lund, Bjoern; Roberts, Roland; Slunga, Ragnar [Uppsala Univ. (Sweden). Dept. of Earth Sciences

    2006-02-15

    The aim of this report is to evaluate the risks for future earthquakes in the vicinity of the proposed nuclear waste repository sites at Forsmark and Oskarshamn. Time periods of 100 and 1,000 years will be considered, which implies that the focus of this study is on an evaluation of the current, general situation in the region. Major events on a longer time scale, such as an ice-age, will only be briefly considered. Earthquakes are products of ongoing deformations within the Earth and this report will, therefore, concentrate on the current state of knowledge about deformations in the region. As earthquakes are our most important source of information about deformations at depth in the crust, we will focus on the available seismic data using the Nordic earthquake catalog maintained at the Institute of Seismology, Helsinki University, and the recent data from the new Swedish National Seismic Network. Direct measurements of surface deformation using the Global Positioning System will also be utilized in the analysis. Sweden is a low seismicity area, with most earthquakes being observed in the south-west, around Lake Vaenern, along the north-east coast and in Norrbotten. South-eastern Sweden is on the contrary relatively inactive. Seismicity is also, generally, episodic in time which together with the short period of instrumental observation, approximately 100 years, makes our knowledge about the activity far from complete. Although very large earthquakes (magnitude about 8) have occurred in Sweden, it is generally agreed that these were connected to the late stages of deglaciation at the end of the previous ice-age. At the time scales considered in this report, inferences from current seismicity is of more relevance. This data suggests that we should expect at least one magnitude 5 earthquake in our region every century and one magnitude 6 earthquake every one thousand years. In order to illustrate the effects of static and dynamic deformation from a magnitude 5

  14. AEGIS technology demonstration for a nuclear waste repository in basalt. Assessment of effectiveness of geologic isolation systems

    Energy Technology Data Exchange (ETDEWEB)

    Dove, F.H.; Cole, C.R.; Foley, M.G.

    1982-09-01

    A technology demonstration of current performance assessment techniques as applied to a nuclear waste repository in the Columbia Plateau Basalts was conducted. Hypothetical repository coordinates were selected for an actual geographical setting on the Hanford Reservation in the state of Washington. Published hydrologic and geologic data used in the analyses were gathered in 1979 or earlier. The following report documents the technology demonstration in basalt. Available information has been used to establish the data base and initial hydrologic and geologic interpretations for this site-specific application. A simplified diagram of the AEGIS analyses is shown. Because an understanding of the dynamics of ground-water flow is essential to the development of release scenarios and consequence analyses, a key step in the demonstration is the systems characterization contained in the conceptual model. Regional and local ground-water movement patterns have been defined with the aid of hydrologic computer models. Hypothetical release scenarios have been developed and evaluated by a process involving expert opinion and a Geologic Simulation Model for basalt. (The Geologic Simulation Model can also be used to forecast future boundary conditions for the hydrologic simulation.) Chemical reactivity of the basalt with ground water will influence the leaching and transport of radionuclides; solubility equilibria based on available data are estimated with geochemical models. After the radionuclide concentrations are mathematically introduced into the ground-water movement patterns, waste movement patterns are outlined over elapsed time. Contaminant transport results are summarized for significant radionuclides that are hypothetically released to the accessible environment and to the biosphere.

  15. Social impacts of hazardous and nuclear facilities and events: Implications for Nevada and the Yucca Mountain high-level nuclear waste repository; [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Freudenburg, W.R. [Wisconsin Univ., Madison, WI (United States); Carter, L.F.; Willard, W. [Washington State Univ., Pullman, WA (United States); Lodwick, D.G. [Miami Univ., Oxford, OH (United States); Hardert, R.A. [Arizona State Univ., Tempe, AZ (United States); Levine, A.G. [State Univ. of New York, Buffalo, NY (United States). Dept. of Sociology; Kroll-Smith, S. [New Orleans Univ., LA (United States); Couch, S.R. [Pennsylvania State Univ., University Park, PA (United States); Edelstein, M.R. [Ramapo College, Mahwah, NJ (United States)

    1992-05-01

    Social impacts of a nuclear waste repository are described. Various case studies are cited such as Rocky Flats Plant, the Feed Materials Production Center, and Love Canal. The social impacts of toxic contamination, mitigating environmental stigma and loss of trust are also discussed.

  16. Hanford Tank Waste to WIPP - Maximizing the Value of our National Repository Asset

    Energy Technology Data Exchange (ETDEWEB)

    Tedeschi, Allan R.; Wheeler, Martin

    2013-11-11

    Preplanning scope for the Hanford tank transuranic (TRU) waste project was authorized in 2013 by the Department of Energy (DOE) Office of River Protection (ORP) after a project standby period of eight years. Significant changes in DOE orders, Hanford contracts, and requirements at the Waste Isolation Pilot Plant (WIPP) have occurred during this time period, in addition to newly implemented regulatory permitting, re-evaluated waste management strategies, and new commercial applications. Preplanning has identified the following key approaches for reactivating the project: qualification of tank inventory designations and completion of all environmental regulatory permitting; identifying program options to accelerate retrieval of key leaking tank T-111; planning fully compliant implementation of DOE Order 413.3B, and DOE Standard 1189 for potential on-site treatment; and re-evaluation of commercial retrieval and treatment technologies for better strategic bundling of permanent waste disposal options.

  17. Assessment of a KBS-3 nuclear waste repository as a plane of weakness

    Energy Technology Data Exchange (ETDEWEB)

    Loennqvist, Margareta; Kristensson, Ola; Faelth, Billy (Clay Technology AB, Lund (Sweden))

    2010-06-15

    The objective of this study is to investigate if the KBS-3 repository can act as a plane of weakness when subjected to different loads. These loads may cause either shear- or tensile fracturing. In this report these two modes of fracturing are simply referred to as 'Shearing' and 'Sheeting', respectively. The sensitivity of the rock mass to the presence of a system of tunnels is studied by means of numerical modelling using the two-dimensional distinct element code UDEC. In order to study the stability against shearing, the slip behaviours of two cases are compared: - A single fracture embedded in a portion of rock. - A single fracture embedded in a portion of rock is cutting through a system of tunnels, i.e. a repository. The evaluation concerns three issues: - How the presence of a system of tunnels affects the stability of the rock mass. - How the presence of a system of tunnels affects the shear displacements in the hypothetical case of complete failure. - How the tunnel spacing affects the stability and shear displacements. The above is investigated for a number of in situ stress states. The stress states are varied in absolute magnitude, ratio between major and minor principal stress and inclination of the major stress with respect to the fracture plane. The results from the models are used to evaluate the stability of the repository rock mass against shear failure in terms of Factor of Safety (FoS). The results indicate that the stability margin in the fracture has a limited sensitivity to the presence of the tunnels and to the tunnel spacing. Including tunnels with 40 m spacing gives a reduction of the stability margin by about 20% at a maximum. Applying the stress state where the stresses are oriented in order to give maximum instability gives a FoS higher than 1.4 for all tunnel spacings larger than 20 m. The stability is also evaluated using stress input from dynamic earthquake simulations. The FoS quantity is calculated based on the

  18. A probabilistic approach to rock mechanical property characterization for nuclear waste repository design

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kunsoo; Gao, Hang [Columbia Univ., New York, NY (United States)

    1996-04-01

    A probabilistic approach is proposed for the characterization of host rock mechanical properties at the Yucca Mountain site. This approach helps define the probability distribution of rock properties by utilizing extreme value statistics and Monte Carlo simulation. We analyze mechanical property data of tuff obtained by the NNWSI Project to assess the utility of the methodology. The analysis indicates that laboratory measured strength and deformation data of Calico Hills and Bullfrog tuffs follow an extremal. probability distribution (the third type asymptotic distribution of the smallest values). Monte Carlo simulation is carried out to estimate rock mass deformation moduli using a one-dimensional tuff model proposed by Zimmermann and Finley. We suggest that the results of these analyses be incorporated into the repository design.

  19. Can Sisyphus succeed? Getting U.S. high-level nuclear waste into a geological repository.

    Science.gov (United States)

    North, D Warner

    2013-01-01

    The U.S. government has the obligation of managing the high-level radioactive waste from its defense activities and also, under existing law, from civilian nuclear power generation. This obligation is not being met. The January 2012 Final Report from the Blue Ribbon Commission on America's Nuclear Future provides commendable guidance but little that is new. The author, who served on the federal Nuclear Waste Technical Review Board from 1989 to 1994 and subsequently on the Board on Radioactive Waste Management of the National Research Council from 1994 to 1999, provides a perspective both on the Commission's recommendations and a potential path toward progress in meeting the federal obligation. By analogy to Sisyphus of Greek mythology, our nation needs to find a way to roll the rock to the top of the hill and have it stay there, rather than continuing to roll back down again. © 2012 Society for Risk Analysis.

  20. Project characteristics monitoring report: BWIP (Basalt Waste Isolation Program) repository project

    Energy Technology Data Exchange (ETDEWEB)

    Friedli, E.A.; Herborn, D.I.; Taylor, C.D.; Tomlinson, K.M.

    1988-03-01

    This monitoring report has been prepared to show compliance with provisions of the Nuclear Waste Policy Act of 1982 (NWPA) and to provide local and state government agencies with information concerning the Basalt Waste Isolation Program (BWIP). This report contains data for the time period May 26, 1986 to February 1988. The data include employment figures, salaries, project purchases, taxes and fees paid, worker survey results, and project closedown personal interview summaries. This information has become particularly important since the decision in December 1987 to stop all BWIP activities except those for site reclamation. The Nuclear Waste Policy Amendments Act of 1987 requires nonreclamation work at the Hanford Site to stop as of March 22, 1988. 7 refs., 6 figs., 28 tabs.

  1. Environmental and health impacts of February 14, 2014 radiation release from the nation's only deep geologic nuclear waste repository.

    Science.gov (United States)

    Thakur, P; Lemons, B G; Ballard, S; Hardy, R

    2015-08-01

    The environmental impact of the February 14, 2014 radiation release from the nation's only deep geologic nuclear waste repository, the Waste Isolation Pilot Plant (WIPP) was assessed using monitoring data from an independent monitoring program conducted by the Carlsbad Environmental Monitoring & Research Center (CEMRC). After almost 15 years of safe and efficient operations, the WIPP had one of its waste drums rupture underground resulting in the release of moderate levels of radioactivity into the underground air. A small amount of radioactivity also escaped to the surface through the ventilation system and was detected above ground. It was the first unambiguous release from the WIPP repository. The dominant radionuclides released were americium and plutonium, in a ratio that matches the content of the breached drum. The accelerated air monitoring campaign, which began following the accident, indicates that releases were low and localized, and no radiation-related health effects among local workers or the public would be expected. The highest activity detected was 115.2 μBq/m(3) for (241)Am and 10.2 μBq/m(3) for (239+240)Pu at a sampling station located 91 m away from the underground air exhaust point and 81.4 μBq/m(3) of (241)Am and 5.8 μBq/m(3) of (239+240)Pu at a monitoring station located approximately one kilometer northwest of the WIPP facility. CEMRC's recent monitoring data show that the concentration levels of these radionuclides have returned to normal background levels and in many instances, are not even detectable, demonstrating no long-term environmental impacts of the recent radiation release event at the WIPP. This article presents an evaluation of almost one year of environmental monitoring data that informed the public that the levels of radiation that got out to the environment were very low and did not, and will not harm anyone or have any long-term environmental consequence. In terms of radiological risk at or in the vicinity of the

  2. Coupling Legacy and Contemporary Deterministic Codes to Goldsim for Probabilistic Assessments of Potential Low-Level Waste Repository Sites

    Science.gov (United States)

    Mattie, P. D.; Knowlton, R. G.; Arnold, B. W.; Tien, N.; Kuo, M.

    2006-12-01

    project between Sandia National Laboratories and Taiwan's Institute of Nuclear Energy Research (INER) for the preliminary assessment of several candidate low-level waste repository sites. Sandia National Laboratories is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under Contract DE AC04 94AL85000.

  3. No nuclear power plant - now final repository? What to do with small amounts of waste?; Kein Kernkraftwerk - kein Endlager? Wohin mit wenig Abfaellen?

    Energy Technology Data Exchange (ETDEWEB)

    Feinhals, Joerg [DMT GmbH und Co. KG, Hamburg (Germany)

    2015-07-01

    Countries with nuclear power plants try to find a solution for the disposal of radioactive waste. Countries that have no nuclear power plants but produce radioactive waste in medicine, industry and research and operate research reactors have a problem: the challenging question of an appropriate disposal concept. Possibilities for such a concept are discussed in this contribution, for instance a multinational final repository, near-surface disposal of low- and medium-level radioactive wastes or a small scale disposal facility (SSDF). In any case safety analyses are required.

  4. Nuclear Waste Risk Perceptions and Attitudes in Siting a Final Repository for Spent Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Sjoeberg, Lennart [Stockholm School of Economics (Sweden). Center for Risk Research

    2006-09-15

    The paper does the following: Describes the time trends between 2001 and 2005 in terms of policy intention, perceived risk, trust and attitude Analyzes the relationships between policy attitude - the major dependent variable - and the explanatory variables of perceived risk, trust and attitude. Determines whether policy attitude variation across time, municipalities and genders can be accounted for by variation in perceived risk, trust and attitude. Random samples of 2000 persons living in Oesthammar and Oskarshamn were approached with a mailed questionnaire in 2005 (as was done in 2005). After two reminders, 888 had returned filled out questionnaires, yielding a total response rate of 50 percent, taking into account that some persons had moved without giving a forwarding address to the post office, and that some were unable to answer due to illness or old age. (1). There was a substantially more positive attitude to a local SNF repository in 2005 than in 2001, after an intervening period of phase 2 site investigation. This was true for men and women, both municipalities and with all the response measures analyzed. Men were more positive than women, and had developed more strongly in the positive direction than women had. The attitude in Oskarshamn was somewhat more positive than in Oesthammar. (2). Policy intention was well accounted for by the explanatory variables used here, close to 64 percent of the variance. The most important explanatory variables were epistemic trust, attitude to the repository and social trust, in that order. The differences among these three variables were small with regard to explanatory power. (3) Variation in policy attitude across time, municipalities and gender was reduced in an analysis of covariance with risk, trust and attitude as controlling factors. Hence, these factors explain a large fraction of the variation in policy attitude as observed here. Yet, the time trend was not fully explained and gender variability remained to

  5. Simulating Earthquake Rupture and Off-Fault Fracture Response: Application to the Safety Assessment of the Swedish Nuclear Waste Repository

    KAUST Repository

    Falth, B.

    2014-12-09

    To assess the long-term safety of a deep repository of spent nuclear fuel, upper bound estimates of seismically induced secondary fracture shear displacements are needed. For this purpose, we analyze a model including an earthquake fault, which is surrounded by a number of smaller discontinuities representing fractures on which secondary displacements may be induced. Initial stresses are applied and a rupture is initiated at a predefined hypocenter and propagated at a specified rupture speed. During rupture we monitor shear displacements taking place on the nearby fracture planes in response to static as well as dynamic effects. As a numerical tool, we use the 3Dimensional Distinct Element Code (3DEC) because it has the capability to handle numerous discontinuities with different orientations and at different locations simultaneously. In tests performed to benchmark the capability of our method to generate and propagate seismic waves, 3DEC generates results in good agreement with results from both Stokes solution and the Compsyn code package. In a preliminary application of our method to the nuclear waste repository site at Forsmark, southern Sweden, we assume end-glacial stress conditions and rupture on a shallow, gently dipping, highly prestressed fault with low residual strength. The rupture generates nearly complete stress drop and an M-w 5.6 event on the 12 km(2) rupture area. Of the 1584 secondary fractures (150 m radius), with a wide range of orientations and locations relative to the fault, a majority move less than 5 mm. The maximum shear displacement is some tens of millimeters at 200 m fault-fracture distance.

  6. Microbial Gas Generation Under Expected Waste Isolation Pilot Plant Repository Conditions: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gillow, J.B.; Francis, A.

    2011-07-01

    Gas generation from the microbial degradation of the organic constituents of transuranic (TRU) waste under conditions expected in the Waste Isolation Pilot Plant (WIPP) was investigated. The biodegradation of mixed cellulosic materials and electron-beam irradiated plastic and rubber materials (polyethylene, polyvinylchloride, hypalon, leaded hypalon, and neoprene) was examined. We evaluated the effects of environmental variables such as initial atmosphere (air or nitrogen), water content (humid ({approx}70% relative humidity, RH) and brine inundated), and nutrient amendments (nitogen phosphate, yeast extract, and excess nitrate) on microbial gas generation. Total gas production was determined by pressure measurement and carbon dioxide (CO{sub 2}) and methane (CH{sub 4}) were analyzed by gas chromatography; cellulose degradation products in solution were analyzed by high-performance liquid chromatography. Microbial populations in the samples were determined by direct microscopy and molecular analysis. The results of this work are summarized.

  7. External Criticality Risk of Immobilized Plutonium Waste Form in a Geologic Repository

    Energy Technology Data Exchange (ETDEWEB)

    J. McClure

    2001-03-12

    This purpose of this technical report is to provide a comprehensive summary of the waste package (WP) external criticality-related risk of the Plutonium Disposition ceramic waste form, which is being developed and evaluated by the Office of Fissile Materials Disposition of the United States Department of Energy (DOE). Potential accumulation of the fissile materials, {sup 239}Pu and {sup 235}U, in rock formations having a favorable chemical environment for such actions, requires analysis because autocatalytic configurations, while unlikely to form, never-the-less have consequences which are undesirable and require evaluation. Secondly, the WP design has evolved necessitating a re-evaluation of the internal WP degradation scenarios that contribute to the external source terms. The scope of this study includes a summary of the revised WP degradation calculations, a summary of the accumulation mechanisms in fractures and lithophysae in the tuff beneath the WP footprint, and a summary of the criticality risk calculations from any accumulated fissile material. Accumulations of fissile material external to the WP sufficient to pose a potential criticality risk require a deposition mechanism operating over sufficient time to reach required levels. The transporting solution concentrations themselves are well below critical levels (CRWMS 2001e). The ceramic waste form consists of Pu immobilized in ceramic disks, which would be embedded in High-Level Waste (HLW) glass in the standard HLW glass disposal canister. The ceramic disks would occupy approximately 12% of the HLW canister volume, while most of the remaining 88% of the volume would be occupied by HLW glass.

  8. Thermo-Hydro Mechanical Characteristics and Processes in the Clay Barrier of a High Level Radioactive Waste Repository. State of the Art Report

    Energy Technology Data Exchange (ETDEWEB)

    Villar, M. V.

    2004-07-01

    This document is a summary of the available information on the thermo-hydro-mechanical properties of the bentonite barrier of a high-level radioactive waste repository and of the processes taking place in it during the successive repository operation phases. Mainly the thermal properties, the volume change processes (swelling and consolidation), the permeability and the water retention capacity are analysed. A review is made of the existing experimental knowledge on the modification of the these properties by the effect of temperature, water salinity, humidity and density of the bentonite, and their foreseen evolution as a consequence of the processes expected in the repository. The compiled evolution refers mostly to the FEBEX (Spain), the MX-80 (US) and the FoCa (France) bentonite, considered as reference barrier materials in several European disposal concepts. (Author) 102 refs.

  9. A simplified model for estimating health effects due to leaching of long-lived nuclides stored in a radioactive waste repository.

    Science.gov (United States)

    Robkin, M

    1984-02-01

    Evaluation of alternate methods of treating long-lived radionuclides to be stored in a waste repository include evaluating the differences in health effects from a potential release due to the distribution of nuclides produced by each method. The potential for release and the health effects extend into the indefinite future so predictions of human behavior become speculative. A simple model is proposed which incorporates the nuclides in the repository, leached, in transit in ground water, discharged to surface water, used for irrigation, taken up into crops and ingested. The model yields a solution of simple form and permits the evaluation of potential health effects per unit activity of a nuclide initially placed in the repository. The model is applied to calculate the potential health effects due to the nuclides occurring in a 4n, 4n + 1, 4n + 2, and 4n + 3 decay chain.

  10. Estimating and coping with public response to radioactive waste repository siting

    Energy Technology Data Exchange (ETDEWEB)

    Payne, B.A.

    1984-02-07

    The siting and construction of a radioactive waste disposal operation is likely to be controversial in the communities being considered, and at the state and national levels as well. Public response can be conceptualized at two levels: individual, and group or organizational. At the individual level, public response is the behavior of people motivated by their attitudes, knowledge, and perceptions of radioactive waste and its hazards and risks. On the group or organizational level, public response is the organized activity of individuals. Organizations provide the ability to pool resources and talents, set up a division of labor, hire experts, develop a skilled leadership, take legal action, and so on. A broad range of organizations is possible: ad hoc, existing community groups with an added purpose, nationally-recognized organizations, or government offices and agencies. Two cases of response to radioactive waste disposal sites illustrate these sources and kinds of response and lead to indicators to estimate the nature and level of response. Finally, drawing from the theoretical discussion of the sources and levels of public response, on the estimation techniques, and on the examples, specific coping strategies are developed. These strategies take different forms, based on the nature and level of response (either supporting or opposing) to the proposed siting, and the past experience of the community members with similar projects, with other federal requirements, and with citizens' action groups, as well as sources and accuracy of information individuals and groups have. However, all strategies are based on a policy of honesty and straight-forwardness, with a sincere effort on the part of site evaluators and decision-makers to be attentive and responsive to the public's concerns. 10 references.

  11. Development of database systems for safety of repositories for disposal of radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yeong Hoon; Han, Jeong Sang; Shin, Hyeon Joon; Ham, Sang Won; Moon, Sang Kee [Yonsei Univ., Seoul (Korea, Republic of)

    1998-03-15

    In this study, contents and survey and supervision items in each part are selected to avoid overlap between different parts referring national lows, criterion, and guidance related to atomic energy. The items consist of climatology, hydrology, geology, seismology, engineering geology, geochemistry, and civil and social parts. Based on these items, general study and systematic control related to the stability of disposal sites os established and as specific region required with the properties that is similar to properties of radioactive waste disposal sites, Ulsan region equipped with LPG underground storage facility was selected and its datum were surveyed and inputted. So propriety of established database system was proved.

  12. BENTONITE-QUARTZ SAND AS THE BACKFILL MATERIALS ON THE RADIOACTIVE WASTE REPOSITORY

    OpenAIRE

    Raharjo Raharjo

    2010-01-01

    An investigation of the contribution of quartz sand in the bentonite mixture as the backfill materials on the shallow land burial of radioactive waste has been done. The experiment objective is to determine the effect of quartz sand in a bentonite mixture with bentonite particle sizes of -20+40, -40+60, and -60+80 mesh on the retardation factor and the uranium dispersion in the simulation of uranium migration in the backfill materials. The experiment was carried out by the fixed bed metho...

  13. A literature review of coupled thermal-hydrologic-mechanical-chemical processes pertinent to the proposed high-level nuclear waste repository at Yucca Mountain

    Energy Technology Data Exchange (ETDEWEB)

    Manteufel, R.D.; Ahola, M.P.; Turner, D.R.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1993-07-01

    A literature review has been conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant to the design and/or performance of the proposed high-level waste (HLW) repository at Yucca Mountain, Nevada. The review focuses on identifying coupling mechanisms between individual processes and assessing their importance (i.e., if the coupling is either important, potentially important, or negligible). The significance of considering THMC-coupled processes lies in whether or not the processes impact the design and/or performance objectives of the repository. A review, such as reported here, is useful in identifying which coupled effects will be important, hence which coupled effects will need to be investigated by the US Nuclear Regulatory Commission in order to assess the assumptions, data, analyses, and conclusions in the design and performance assessment of a geologic reposit``. Although this work stems from regulatory interest in the design of the geologic repository, it should be emphasized that the repository design implicitly considers all of the repository performance objectives, including those associated with the time after permanent closure. The scope of this review is considered beyond previous assessments in that it attempts with the current state-of-knowledge) to determine which couplings are important, and identify which computer codes are currently available to model coupled processes.

  14. Estimation of the limitations for surficial water addition above a potential high level radioactive waste repository at Yucca Mountain, Nevada; Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Fewell, M.E.; Sobolik, S.R.; Gauthier, J.H.

    1992-01-01

    The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface-based and underground testing. Analyses have been performed to design site characterization activities with minimal impact on the ability of the site to isolate waste, and on tests performed as part of the characterization process. One activity of site characterization is the construction of an Exploratory Studies Facility, consisting of underground shafts, drifts, and ramps, and the accompanying surface pad facility and roads. The information in this report addresses the following topics: (1) a discussion of the potential effects of surface construction water on repository-performance, and on surface and underground experiments; (2) one-dimensional numerical calculations predicting the maximum allowable amount of water that may infiltrate the surface of the mountain without affecting repository performance; and (3) two-dimensional numerical calculations of the movement of that amount of surface water and how the water may affect repository performance and experiments. The results contained herein should be used with other site data and scientific/engineering judgement in determining controls on water usage at Yucca Mountain. This document contains information that has been used in preparing Appendix I of the Exploratory Studies Facility Design Requirements document for the Yucca Mountain Site Characterization Project.

  15. Project SAFE. Microbial features, events and processes in the Swedish final repository for low-and intermediate-level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, Karsten [Goeteborg Univ. (Sweden)

    2001-01-01

    The waste disposed of in the Swedish final repository for low and intermediate radioactive waste (SFR) typically contains large amounts of organic substances. This waste thus constitutes a possible source of energy and nutrients for microorganisms. Microbes can degrade the waste to degradation products, which to a varying degree may create problems if the process is significant. The environment for microbial life in the SFR is, however, unique since it cannot be compared to any environment to which microbes have adapted naturally over millions of years. Most similar to the SFR are waste dumps and landfills. In those, microbes degrade the waste and form degradation products. The experience from such 'analogues' and from research performed under repository-like conditions may provide useful clues about the microbial processes which may occur in the repository. Microbes have the ability to degrade bitumen, used to solidify some wastes, but this degradation is very slow under anaerobic conditions. Bitumen degradation will, therefore, not influence the safety of the SFR. However, some microbes can produce acids that could influence concrete stability, particularly in the presence of oxygen. The future SFR environment is anaerobic, which suggests that acid production is a very unlikely problem. Sulphate-reducing bacteria (SRB) have the ability to produce sulphide, which may act as a corrosive on metals. Under specific conditions, with the local groundwater flow close to a metal surface and with dissolved organic material from the repository, pitting corrosion of metal canisters is a potential threat. This process appears to require conditions fairly atypical of the SFR, however. Large groups of microorganisms can use hydrogen as a source of energy, thereby contributing to the decrease of this gas mainly formed from water during the anaerobic corrosion of metals. Cellulose is an excellent substrate for many microorganisms and it will be the dominating carbon and

  16. BENTONITE-QUARTZ SAND AS THE BACKFILL MATERIALS ON THE RADIOACTIVE WASTE REPOSITORY

    Directory of Open Access Journals (Sweden)

    Raharjo Raharjo

    2010-06-01

    Full Text Available An investigation of the contribution of quartz sand in the bentonite mixture as the backfill materials on the shallow land burial of radioactive waste has been done. The experiment objective is to determine the effect of quartz sand in a bentonite mixture with bentonite particle sizes of -20+40, -40+60, and -60+80 mesh on the retardation factor and the uranium dispersion in the simulation of uranium migration in the backfill materials. The experiment was carried out by the fixed bed method in the column filled by the bentonite mixture with a bentonite-to-quartz sand weight percent ratio of 0/100, 25/75, 50/50, 75/25, and 100/0 on the water saturated condition flown by uranyl nitrate solution at concentration (Co of 500 ppm. The concentration of uranium in the effluents in interval 15 minutes represented as Ct was analyzed by spectrophotometer, then using Co and Ct, retardation factor (R and dispersivity ( were determined. The experiment data showed that the bentonite of -60+80 mesh and the quartz sand of -20+40 mesh on bentonite-to-quartz sand with weight percent ratio of 50/50 gave the highest retardation factor and dispersivity of 18.37 and 0.0363 cm, respectively.   Keywords: bentonite, quartz sand, backfill materials, radioactive waste

  17. Demonstrating compliance with protection objectives for non-human biota within post-closure safety cases for radioactive waste repositories.

    Science.gov (United States)

    Jackson, D; Smith, K; Wood, M D

    2014-07-01

    Over recent years, a number of approaches have been developed that enable the calculation of dose rates to animals and plants following the release of radioactivity to the environment. These approaches can be used to assess the potential impacts of activities that may release radioactivity to the environment, such as the operation of waste repositories. A number of national and international studies have identified screening criteria to indicate those assessment results below which further consideration is not generally required. However no internationally agreed criteria are currently available and consistency in criteria between countries has not been achieved. Furthermore, since screening criteria are not intended to be applied as limits, it is clear that they cannot always form a sufficient basis for assessing the adequacy of protection afforded. Typically, exceeding a screening value leads to a regulatory requirement to undertake a further, more detailed assessment. It does not, per se, imply that there is inadequate protection of the organism types at the specific site under assessment. Therefore, there is a need to develop a more structured approach to dealing with situations in which current screening criteria are exceeded. As a contribution to the developing international discussions, and as an interim measure for application where assessments are required currently, a two-tier, three zone framework is proposed here, relevant to the long term assessment of potential impacts from the deep disposal of radioactive wastes. The purpose of the proposed framework is to promote a proportionate and risk-based approach to the level of effort required in undertaking and interpreting an assessment. Copyright © 2013. Published by Elsevier Ltd.

  18. Permeability and pore structure connectivity of basic concrete formulations to use in near-surface repositories for radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Tolentino, Evandro; Santos, Carlos Eduardo de Oliveira [Centro Federal de Educação Tecnológica de Minas Gerais (CEFET-MG), Timóteo, MG (Brazil); Tello, Clédola Cássia Oliveira de, E-mail: tolentino@timoteo.cefetmg.br, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2017-07-01

    The main concern of engineers who prepare concrete specifications for a particular application is to predict the deteriorative exposures that could cause concrete degradation over its intended service life. A durable concrete is able to resist destructive environmental conditions, without requiring excessive maintenance. Durability of cementitious materials largely depends on the possibilities of penetration of hazardous ions into the porous material with water as medium. Therefore, the water permeability of cementitious materials is related to its durability. Permeability and porosity should not instinctively be regarded as manifestations of the same phenomenon. Usually, when permeability increases, porosity increases as well. The connectivity of pore network exerts an important control on preferential flow into cementitious materials. This work presents results of quantitative evaluation of permeability and pore connectivity of Portland cement concretes. Two concrete mixture proportions with limestone and gneiss as coarse aggregate were produced. A modified polycarboxyl ether plasticizer GLENIUM 51 was added to one of the concrete mixtures in order to reduce the water content. Permeability tests were performed on all the specimens and a geometric modeling considering pore with cylindrical shape was applied in order to evaluate the pore network connectivity. The results showed that pore structure connectivity of concrete with plasticizer admixture decreased. The purpose of this research is to expand the knowledge concerning concrete durability and to provide the technical requirements related to the production the Brazilian near-surface repository of radioactive wastes. (author)

  19. Colloid-Facilitated Radionuclide Transport: Current State of Knowledge from a Nuclear Waste Repository Risk Assessment Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Reimus, Paul William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zavarin, Mavrik [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wang, Yifeng [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-01-25

    This report provides an overview of the current state of knowledge of colloid-facilitated radionuclide transport from a nuclear waste repository risk assessment perspective. It draws on work that has been conducted over the past 3 decades, although there is considerable emphasis given to work that has been performed over the past 3-5 years as part of the DOE Used Fuel Disposition Campaign. The timing of this report coincides with the completion of a 3-year DOE membership in the Colloids Formation and Migration (CFM) partnership, an international collaboration of scientists studying colloid-facilitated transport of radionuclides at both the laboratory and field-scales in a fractured crystalline granodiorite at the Grimsel Test Site in Switzerland. This Underground Research Laboratory has hosted the most extensive and carefully-controlled set of colloid-facilitated solute transport experiments that have ever been conducted in an in-situ setting, and a summary of the results to date from these efforts, as they relate to transport over long time and distance scales, is provided in Chapter 3 of this report.

  20. Evaluation of long-term behavior of concretes in high level waste repositories. An accelerated leaching test

    Directory of Open Access Journals (Sweden)

    Hidalgo, A.

    2004-04-01

    Full Text Available The present work describes an accelerated leaching method that with a rapid process allows to develop and evaluate cements for use in a nuclear disposal, and the understanding of the long term effects. The method has been developed to study the stability of cementitious materials in contact with bentonite, to be used in high level radioactivity waste repositories. Nitric acid has been selected to simulate in an accelerated way the pH decreasing produced when concrete is in contact with groundwaters.

    El presente trabajo describe un ensayo acelerado de lixiviación, que mediante un proceso rápido, permite desarrollar y evaluar cementos para su uso en instalaciones nucleares, y la comprensión de su comportamiento a largo plazo. El método se ha desarrollado para estudiar la estabilidad de materiales de base cemento, en contacto con bentonita, que serán utilizados en almacenamientos de resíduos radiactivos de alta actividad. Como agente lixiviante se seleccionó el ácido nítrico, con objeto de simular de forma acelerada, la disminución del pH que se produce cuando el hormigón entra en contacto con aguas subterráneas.

  1. Alternatives generation and analysis for phase I intermediate waste feed staging system design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Britton, M.D.

    1996-10-02

    This document provides; a decision analysis summary; problem statement; constraints, requirements, and assumptions; decision criteria; intermediate waste feed staging system options and alternatives generation and screening; intermediate waste feed staging system design concepts; intermediate waste feed staging system alternative evaluation and analysis; and open issues and actions.

  2. Review of the 1979 workshop on thermomechanical modeling for a hard rock waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Holzer, F.

    1980-01-01

    The 1979 Workshop discussed and considered issues and needs in the areas of Modeling, Laboratory Measurements, Instruments and Field Measurements, and In-situ Tests and Model Validation. A set of conclusions and recommendations was developed, which focused on the necessity of treating the rock mass response to the waste emplaced in it. The conclusions dealt with characterizing the fracture system, determining the mechanical and thermal properties, developing an understanding of the physical process, predicting and measuring the response, and carrying out meaningful validation tests. Measured against the stated objectives, the 1979 Workshop was successful. With respect to implementation of its recommendations, this conclusion is not so obvious, although some activities of the past year suggest the Workshop has had a beneficial influence.

  3. Study of degenerate parabolic system modeling the hydrogen displacement in a nuclear waste repository

    KAUST Repository

    Caro, Florian

    2013-09-01

    Our goal is the mathematical analysis of a two phase (liquid and gas) two components (water and hydrogen) system modeling the hydrogen displacement in a storage site for radioactive waste. We suppose that the water is only in the liquid phase and is incompressible. The hydrogen in the gas phase is supposed compressible and could be dissolved into the water with the Henry law. The flow is described by the conservation of the mass of each components. The model is treated without simplified assumptions on the gas density. This model is degenerated due to vanishing terms. We establish an existence result for the nonlinear degenerate parabolic system based on new energy estimate on pressures.

  4. Numerical investigation of high level nuclear waste disposal in deep anisotropic geologic repositories

    KAUST Repository

    Salama, Amgad

    2015-11-01

    One of the techniques that have been proposed to dispose high level nuclear waste (HLW) has been to bury them in deep geologic formations, which offer relatively enough space to accommodate the large volume of HLW accumulated over the years since the dawn of nuclear era. Albeit the relatively large number of research works that have been conducted to investigate temperature distribution surrounding waste canisters, they all abide to consider the host formations as homogeneous and isotropic. While this could be the case in some subsurface settings, in most cases, this is not true. In other words, subsurface formations are, in most cases, inherently anisotropic and heterogeneous. In this research, we show that even a slight difference in anisotropy of thermal conductivity of host rock with direction could have interesting effects on temperature fields. We investigate the effect of anisotropy angle (the angle the principal direction of anisotropy is making with the coordinate system) on the temperature field as well as on the maximum temperature attained in different barrier systems. This includes 0°, 30°, 45°, 60°, and 90°in addition to the isotropic case as a reference. We also consider the effect of anisotropy ratio (the ratio between the principal direction anisotropies) on the temperature fields and maximum temperature history. This includes ratios ranging between 1.5 and 4. Interesting patterns of temperature fields and profiles are obtained. It is found that the temperature contours are aligned more towards the principal direction of anisotropy. Furthermore the peak temperature in the buffer zone is found to be larger the smaller the anisotropy angle and vice versa. © 2015 Elsevier Ltd. All rights reserved.

  5. Deep repository for long-lived low and intermediate-level waste. A preliminary safety assessment; Djupfoervar for laanglivat laag- och medelaktivt avfall. Preliminaer saekerhetsanalys

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-01

    A preliminary safety assessment has been performed of a deep repository for long-lived low and intermediate-level waste, SFL 3-5. The purpose of the study is to investigate the capacity of the facility to act as a barrier to the release of radionuclides and toxic pollutants, and to shed light on the importance of the location of the repository site. A safety assessment (SR 97) of a deep repository for spent fuel has been carried out at the same time. In SR 97, three hypothetical repository sites have been selected for study. These sites exhibit fairly different conditions in terms of hydrogeology, hydrochemistry and ecosystems. To make use of information and data from the SR 97 study, we have assumed that SFL 3-5 is co-sited with the deep repository for spent fuel. A conceivable alternative is to site SFL 3-5 as a completely separate repository. The focus of the SFL 3-5 study is a quantitative analysis of the environmental impact for a reference scenario, while other scenarios are discussed and analyzed in more general terms. Migration in the repository's near- and far-field has been taken into account in the reference scenario. Environmental impact on the three sites has also been calculated. The calculations are based on an updated forecast of the waste to be disposed of in SFL 3-5. The forecast includes radionuclide content, toxic metals and other substances that have a bearing on a safety assessment. The safety assessment shows how important the site is for safety. Two factors stand out as being particularly important: the water flow at the depth in the rock where the repository is built, and the ecosystem in the areas on the ground surface where releases may take place in the future. Another conclusion is that radionuclides that are highly mobile and long-lived, such as {sup 36}Cl and {sup 93}Mo, are important to be taken into consideration. Their being long-lived means that barriers and the ecosystems must be regarded with a very long time horizon.

  6. MEASUREMENT AND CALCULATION OF RADIONUCLIDE ACTIVITIES IN SAVANNAH RIVER SITE HIGH LEVEL WASTE SLUDGE FOR ACCEPTANCE OF DEFENSE WASTE PROCESSING FACILITY GLASS IN A FEDERAL REPOSITORY

    Energy Technology Data Exchange (ETDEWEB)

    Bannochie, C; David Diprete, D; Ned Bibler, N

    2008-12-31

    This paper describes the results of the analyses of High Level Waste (HLW) sludge slurry samples and of the calculations necessary to decay the radionuclides to meet the reporting requirement in the Waste Acceptance Product Specifications (WAPS) [1]. The concentrations of 45 radionuclides were measured. The results of these analyses provide input for radioactive decay calculations used to project the radionuclide inventory at the specified index years, 2015 and 3115. This information is necessary to complete the Production Records at Savannah River Site's Defense Waste Processing Facility (DWPF) so that the final glass product resulting from Macrobatch 5 (MB5) can eventually be submitted to a Federal Repository. Five of the necessary input radionuclides for the decay calculations could not be measured directly due to their low concentrations and/or analytical interferences. These isotopes are Nb-93m, Pd-107, Cd-113m, Cs-135, and Cm-248. Methods for calculating these species from concentrations of appropriate other radionuclides will be discussed. Also the average age of the MB5 HLW had to be calculated from decay of Sr-90 in order to predict the initial concentration of Nb-93m. As a result of the measurements and calculations, thirty-one WAPS reportable radioactive isotopes were identified for MB5. The total activity of MB5 sludge solids will decrease from 1.6E+04 {micro}Ci (1 {micro}Ci = 3.7E+04 Bq) per gram of total solids in 2008 to 2.3E+01 {micro}Ci per gram of total solids in 3115, a decrease of approximately 700 fold. Finally, evidence will be given for the low observed concentrations of the radionuclides Tc-99, I-129, and Sm-151 in the HLW sludges. These radionuclides were reduced in the MB5 sludge slurry to a fraction of their expected production levels due to SRS processing conditions.

  7. Community interviews task report: Working draft: BWIP (Basalt Waste Isolation Project) Repository Project

    Energy Technology Data Exchange (ETDEWEB)

    Bolton, P.A.

    1987-11-01

    The socioeconomic program for the Basalt Waste Isolation Project (BWIP) requires the collection of information about economic, social and cultural conditions, demographic, housing and settlement patterns, and the provision of public services and facilities in order to monitor and assess the impacts of the project on the study area. Much of the information needed by the socioeconomic program is compiled, maintained, and used by officials or staff members of local, regional, state, or tribal agencies or organizations. Because much of this information is prepared for internal use, the documents are often not published or advertised and it can be difficult for researchers to identify many obscure, yet useful, sources of information. In order to identify and gain access to this information, it is often most efficient to talk directly with officials and staff members of pertinent agencies or organizations who may have knowledge of these documents or who may have useful information themselves. Consequently, interviews in the study communities with persons knowledgeable about the socioeconomic or sociocultural characteristics of the area constitute an important source of data for the socioeconomic program. In addition to identifying various data sources, these interviews provide a mechanism for understanding and interpreting those data. Knowledge of specific local conditions is often necessary to correctly interpret quantitative data. The purpose of this paper is to summarize the objectives of the community interviews task and the general methods that will be used in conducting the community interviews. 3 refs.

  8. INDIVIDUAL DOSIMETRY IN DISPOSAL REPOSITORY OF HEAT-GENERATING NUCLEAR WASTE.

    Science.gov (United States)

    Pang, Bo; Saurí Suárez, Héctor; Becker, Frank

    2016-09-01

    Certain working scenarios in a disposal facility of heat-generating nuclear waste might lead to an enhanced level of radiation exposure for workers in such facilities. Hence, a realistic estimation of the personal dose during individual working scenarios is desired. In this study, the general-purpose Monte Carlo N-Particle code MCNP6 (Pelowitz, D. B. (ed). MCNP6 user manual LA-CP-13-00634, Rev. 0 (2013)) was applied to simulate a representative radiation field in a disposal facility. A tool to estimate the personal dose was then proposed by taking into account the influence of individual motion sequences during working scenarios. As basis for this approach, a movable whole-body phantom was developed to describe individual body gestures of the workers during motion sequences. In this study, the proposed method was applied to the German concept of geological disposal in rock salt. The feasibility of the proposed approach was demonstrated with an example of working scenario in an emplacement drift of a rock salt mine. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Biosphere modelling for dose assessments of radioactive waste repositories. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Klos, R. [Paul Scherrer Inst., Wuerenlingen (Switzerland)] [and others

    1996-09-01

    The aims of the Complementary Studies Working Group were: to investigate and explain differences which exist between contemporary models with respect to how, for a given test case, they represent the modelled Features, Events and Processes (FEPs) and how the nature of these representations affects the calculational end-points; to determine the most appropriate ways of representing key FEPs; to identify where knowledge needs to be improved to give better representations of these key FEPs in the future and where simplifications of existing formulations might be possible; to show that the modelling undertaken is suitable for purpose, in that it is robust and that it is unlikely that the radiological consequences calculated by the models would be underestimated (so that any conservative bias in the models is justified); to build confidence in the available modelling tools; to extend the work undertaken in the first phase of BIOMOVS to include consideration of radiological dose. Ten modelling groups from Western Europe and Canada have participated, revealing a variety of representations of radionuclide transport processes and techniques for calculating dose. The exercise has focused on the ways in which key FEPs are represented with the intention of determining the robustness or otherwise of existing representations. This has been achieved by applying a well defined dataset representative of a Central European inland valley. Human habits and lifestyle are chosen to be representative of a subsistence agricultural community. Climatic conditions are those of the present day. Many of the conclusions have relevance beyond the immediate concerns of the Central European biospheres and, although care should be exercised when terms of reference differ greatly from the system detailed here, much has been learned which has wider applicability. The exercise has successfully compared not only the behaviour of biosphere models for waste disposal assessments, but has also provided the

  10. LIFE Materials: Fuel Cycle and Repository Volume 11

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, H; Blink, J A

    2008-12-12

    The fusion-fission LIFE engine concept provides a path to a sustainable energy future based on safe, carbon-free nuclear power with minimal nuclear waste. The LIFE design ultimately offers many advantages over current and proposed nuclear energy technologies, and could well lead to a true worldwide nuclear energy renaissance. When compared with existing and other proposed future nuclear reactor designs, the LIFE engine exceeds alternatives in the most important measures of proliferation resistance and waste minimization. The engine needs no refueling during its lifetime. It requires no removal of fuel or fissile material generated in the LIFE engine. It leaves no weapons-attractive material at the end of life. Although there is certainly a need for additional work, all indications are that the 'back end' of the fuel cycle does not to raise any 'showstopper' issues for LIFE. Indeed, the LIFE concept has numerous benefits: (1) Per unit of electricity generated, LIFE engines would generate 20-30 times less waste (in terms of mass of heavy metal) requiring disposal in a HLW repository than does the current once-through fuel cycle. (2) Although there may be advanced fuel cycles that can compete with LIFE's low mass flow of heavy metal, all such systems require reprocessing, with attendant proliferation concerns; LIFE engines can do this without enrichment or reprocessing. Moreover, none of the advanced fuel cycles can match the low transuranic content of LIFE waste. (3) The specific thermal power of LIFE waste is initially higher than that of spent LWR fuel. Nevertheless, this higher thermal load can be managed using appropriate engineering features during an interim storage period, and could be accommodated in a Yucca-Mountain-like repository by appropriate 'staging' of the emplacement of waste packages during the operational period of the repository. The planned ventilation rates for Yucca Mountain would be sufficient for LIFE waste

  11. On the flow of groundwater in closed tunnels. Generic hydrogeological modelling of nuclear waste repository, SFL 3-5

    Energy Technology Data Exchange (ETDEWEB)

    Holmen, J.G. [Uppsala Univ. (Sweden). Inst. of Earth Sciences]|[Golder Associates AB (Sweden)

    1997-06-01

    The purpose is to study the flow of groundwater in closed tunnels by use of mathematical models. The calculations were based on three dimensional models, presuming steady state conditions. The stochastic continuum approach was used for representation of a heterogeneous rock mass. The size of the calculated flow is given as a multiple of an unknown regional groundwater flow. The size of the flow in a tunnel has been studied, as regards: Direction of the regional groundwater flow, Tunnel length, width and conductivity; Heterogeneity of the surrounding rock mass; Flow barriers and encapsulation inside a tunnel. The study includes a model of the planned repository for nuclear waste (SFL 3-5). The flow through the tunnels is estimated for different scenarios. The stochastic continuum approach has been investigated, as regards the representation of a scale dependent heterogeneous conductivity. An analytical method is proposed for the scaling of measured conductivity values, the method is consistent with the stochastic continuum approach. Some general conclusions from the work are: The larger the amount of heterogeneity, the larger the expected flow; The effects of the heterogeneity will decrease with increased tunnel length; If the conductivity of the tunnel is smaller than a threshold value, the tunnel conductivity is the most important parameter; If the tunnel conductivity is large and the tunnel is long, the most important parameter is the direction of the regional flow; Given a heterogeneous rock mass, if the tunnel length is shorter than about 500 m, the heterogeneity will be an important parameter, for lengths shorter than about 250 m, probably the most important; The flow through an encapsulation surrounded by a flow barrier is mainly dependent on the conductivity of the barrier. 70 refs, 110 figs, 10 tabs.

  12. Coupled multiphase flow and closure analysis of repository response to waste-generated gas at the Waste Isolation Pilot Plant (WIPP)

    Energy Technology Data Exchange (ETDEWEB)

    Freeze, G.A.; Larson, K.W. [INTERA Inc., Austin, TX (United States); Davies, P.B. [Sandia National Laboratories, Albuquerque, NM (United States)

    1995-10-01

    A long-term assessment of the Waste Isolation Pilot Plant (WIPP) repository performance must consider the impact of gas generation resulting from the corrosion and microbial degradation of the emplaced waste. A multiphase fluid flow code, TOUGH2/EOS8, was adapted to model the processes of gas generation, disposal room creep closure, and multiphase (brine and gas) fluid flow, as well as the coupling between the three processes. System response to gas generation was simulated with a single, isolated disposal room surrounded by homogeneous halite containing two anhydrite interbeds, one above and one below the room. The interbeds were assumed to have flow connections to the room through high-permeability, excavation-induced fractures. System behavior was evaluated by tracking four performance measures: (1) peak room pressure; (2) maximum brine volume in the room; (3) total mass of gas expelled from the room; and (4) the maximum gas migration distance in an interbed. Baseline simulations used current best estimates of system parameters, selected through an evaluation of available data, to predict system response to gas generation under best-estimate conditions. Sensitivity simulations quantified the effects of parameter uncertainty by evaluating the change in the performance measures in response to parameter variations. In the sensitivity simulations, a single parameter value was varied to its minimum and maximum values, representative of the extreme expected values, with all other parameters held at best-estimate values. Sensitivity simulations identified the following parameters as important to gas expulsion and migration away from a disposal room: interbed porosity; interbed permeability; gas-generation potential; halite permeability; and interbed threshold pressure. Simulations also showed that the inclusion of interbed fracturing and a disturbed rock zone had a significant impact on system performance.

  13. Brine and Gas Flow Patterns Between Excavated Areas and Disturbed Rock Zone in the 1996 Performance Assessment for the Waste Isolation Pilot Plant for a Single Drilling Intrusion that Penetrates Repository and Castile Brine Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    ECONOMY,KATHLEEN M.; HELTON,JON CRAIG; VAUGHN,PALMER

    1999-10-01

    The Waste Isolation Pilot Plant (WIPP), which is located in southeastern New Mexico, is being developed for the geologic disposal of transuranic (TRU) waste by the U.S. Department of Energy (DOE). Waste disposal will take place in panels excavated in a bedded salt formation approximately 2000 ft (610 m) below the land surface. The BRAGFLO computer program which solves a system of nonlinear partial differential equations for two-phase flow, was used to investigate brine and gas flow patterns in the vicinity of the repository for the 1996 WIPP performance assessment (PA). The present study examines the implications of modeling assumptions used in conjunction with BRAGFLO in the 1996 WIPP PA that affect brine and gas flow patterns involving two waste regions in the repository (i.e., a single waste panel and the remaining nine waste panels), a disturbed rock zone (DRZ) that lies just above and below these two regions, and a borehole that penetrates the single waste panel and a brine pocket below this panel. The two waste regions are separated by a panel closure. The following insights were obtained from this study. First, the impediment to flow between the two waste regions provided by the panel closure model is reduced due to the permeable and areally extensive nature of the DRZ adopted in the 1996 WIPP PA, which results in the DRZ becoming an effective pathway for gas and brine movement around the panel closures and thus between the two waste regions. Brine and gas flow between the two waste regions via the DRZ causes pressures between the two to equilibrate rapidly, with the result that processes in the intruded waste panel are not isolated from the rest of the repository. Second, the connection between intruded and unintruded waste panels provided by the DRZ increases the time required for repository pressures to equilibrate with the overlying and/or underlying units subsequent to a drilling intrusion. Third, the large and areally extensive DRZ void volumes is a

  14. Mont Terri Project - Ventilation experiment in Opalinus Clay for the disposal of radioactive waste in underground repositories

    Energy Technology Data Exchange (ETDEWEB)

    Mayor, J. C. [Empresa Nacional de Residuos Radioactivos SA (ENRESA), Madrid (Spain); Garcia-Sineriz, J. [Asociacion para la Investigacion y Desarollo Industrial de los Recursos Naturales (AITEMIN), Madrid (Spain); Velasco, M. [DM Iberia SA, Madrid (Spain); Gomez-Hernandez, J. [Ingenieria Hidraulica y Medio Ambiente, Escuela de Ingenieros de Caminos (UPV), Valencia (Spain); Lloret, A.; Matray, J.-M. [IRSN/DEI/SARG/LETS, Fontenay-aux-Roses (France); Coste, F. [Aradis ESG, Sevres Cedex (France); Giraud, A. [LAEGO-ENSG, Vandoeuvre les Nancy (France); Rothfuchs, T. [Gesellschaft fuer Anlagen und Reaktorsicherheit mbH (GRS), Braunschweig (Germany); Marschall, P. [National Cooperative for the Disposal of Radioactive Waste (Nagra), Wettingen (Switzerland); Roesli, U. [Solexperts AG, Moenchaltorf (Switzerland); Mayer, G. [Colenco Power Engineering Ltd, Baden (Switzerland)

    2007-07-01

    The ventilation of the underground drifts during the construction and operation of a radioactive waste repository could produce the partial desaturation of the rock around the drifts, modifying its thermo-hydro-mechanical properties, especially in clayey rocks. This change of rock properties may have an impact on the design of the repositories (drifts spacing and repository size), which depends on the thermal load that the clay barrier and the rock can accept. To evaluate 'in situ' and better understand the desaturation process of a hard clay formation, the Ventilation Experiment (VE) has been carried out at the Mont Terri underground laboratory (Switzerland), generating a flow of dry air during several months along a section of a microtunnel. Specifically, the VE test has been performed, under practically isothermal conditions (T {approx_equal} 15-16 {sup o}C), in a 10 m long section of a non-lined horizontal microtunnel (diameter = 1.3 m), excavated in 1999 in the shaly facies of the Opalinus Clay of Mont Terri. The microtunnel is oriented perpendicular to the bedding strike direction of the rock (mean value of the bedding dip {approx_equal} 25{sup o}). The VE experiment real data and its modelling have shown that the desaturation of clayey rocks of low hydraulic conductivity (K < 10{sup -12} m/s) due to ventilation is very small. Under real repository conditions, the thermal and hydro-mechanical rock characteristics will not be practically affected by the ventilation. Specifically, the monitoring of the VE test (mainly the hygrometer data, confirmed also by the geoelectrical measurements) indicates that, after about 5 months of ventilation with almost dry air, the rock relative humidity (and then the degree of saturation) was less than 95% only in a ring of thickness less than 40 cm. Nevertheless, a suction state (subatmospheric liquid pressures) developed up to a distance of about 2 m, but it should be kept in mind that a clayey rock such as the

  15. Bridging the Gap in the Chemical Thermodynamic Database for Nuclear Waste Repository: Studies of the Effect of Temperature on Actinide Complexation

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Linfeng; Tian, Guoxin; Xia, Yuanxian; Friese, Judah I.; Zanonato, PierLuigi; Di Bernardo, Plinio

    2009-12-21

    Recent results of thermodynamic studies on the complexation of actinides (UO{sub 2}{sup 2+}, NpO{sub 2}{sup +} and Pu{sup 4+}) with F{sup -}, SO{sub 4}{sup 2-} and H{sub 2}PO{sub 4}{sup -}/HPO{sub 4}{sup 2-} at elevated temperatures are reviewed. The data indicate that, for all systems except the 1:1 complexation of Np(V) with HPO{sub 4}{sup 2-}, the complexation of actinides is enhanced by the increase in temperature. The enhancement is primarily due to the increase in the entropy term (T{Delta}S) that exceeds the increase in the enthalpy ({Delta}H) as the temperature is increased. These data bridge the gaps in the chemical thermodynamic database for nuclear waste repository where the temperature could remain significantly higher than 25 C for a long time after the closure of the repository.

  16. Long-Term Modeling of Coupled Processes in a Generic Salt Repository for Heat-Generating Nuclear Waste: Analysis of the Impacts of Halite Solubility Constraints

    Science.gov (United States)

    Blanco Martin, L.; Rutqvist, J.; Battistelli, A.; Birkholzer, J. T.

    2015-12-01

    Rock salt is a potential medium for the underground disposal of nuclear waste because it has several assets, such as its ability to creep and heal fractures and its water and gas tightness in the undisturbed state. In this research, we focus on disposal of heat-generating nuclear waste and we consider a generic salt repository with in-drift emplacement of waste packages and crushed salt backfill. As the natural salt creeps, the crushed salt backfill gets progressively compacted and an engineered barrier system is subsequently created [1]. The safety requirements for such a repository impose that long time scales be considered, during which the integrity of the natural and engineered barriers have to be demonstrated. In order to evaluate this long-term integrity, we perform numerical modeling based on state-of-the-art knowledge. Here, we analyze the impacts of halite dissolution and precipitation within the backfill and the host rock. For this purpose, we use an enhanced equation-of-state module of TOUGH2 that properly includes temperature-dependent solubility constraints [2]. We perform coupled thermal-hydraulic-mechanical modeling and we investigate the influence of the mentioned impacts. The TOUGH-FLAC simulator, adapted for large strains and creep, is used [3]. In order to quantify the importance of salt dissolution and precipitation on the effective porosity, permeability, pore pressure, temperature and stress field, we compare numerical results that include or disregard fluids of variable salinity. The sensitivity of the results to some parameters, such as the initial saturation within the backfill, is also addressed. References: [1] Bechthold, W. et al. Backfilling and Sealing of Underground Repositories for Radioactive Waste in Salt (BAMBUS II Project). Report EUR20621 EN: European Atomic Energy Community, 2004. [2] Battistelli A. Improving the treatment of saline brines in EWASG for the simulation of hydrothermal systems. Proceedings, TOUGH Symposium 2012

  17. A Two-Stage Waste Gasification Reactor for Mars In-Situ Resource Utilization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, build, and test a two-stage waste processing reactor for space applications. Our proposed technology converts waste from space missions into...

  18. Laymen's demand on an understandable safety analysis for a nuclear waste repository. A communication challenge

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, T.L.; Thunberg, A.M. [KASAM - Swedish National Council for Nuclear Waste (Sweden)

    1999-12-01

    This paper is a summary in English of some impressions from a seminar 'Safety Analysis of the Final Disposal of Nuclear Waste. An issue for specialists only or for all of us?' The seminar was held in Swedish and was arranged by KASAM in Nykoeping, Sweden in November 1997. A report in Swedish from the seminar has been published. The seminar was arranged in response to a request from representatives from some of the municipalities concerned by the feasibility studies, which are part of the siting process. They had noticed that it is very hard for people without specialist competence to get an understanding of the safety issues based on the available information. There is a need for a presentation of the safety analysis, which is adopted not only for the need of the safety authorities, which have their own expertise, but also for the need of laymen who are involved in issues about the design, siting and safety of a final repository. Therefore, the seminar was mainly intended for representatives for the citizens (i.e. politicians) from the municipalities involved in the ongoing feasibility studies in Sweden. Some representatives from different environmental organisations opposing final disposal were also invited as well as representatives from the nuclear industry and from the concerned Swedish authorities. The seminar was structured in four sessions The handling of risk in the modern society - risk assessment and risk comparisons; The safety analysis and its role for the citizens; What can actually happen - in our own time and in the future?; Group discussions. In order to give a realistic picture of the intense debate, which at least in some of the municipalities had been very apparent, the organisers had chosen to make SKB and Greenpeace main actors at the seminar, such as they appeared in connection with campaign before the referendum at Malaa. Parts of the seminar were arranged like a hearing, led by a science journalist. The intention with this paper is

  19. Background studies in support of a feasibility assessment on the use of copper-base materials for nuclear waste packages in a repository in tuff

    Energy Technology Data Exchange (ETDEWEB)

    Van Konynenburg, R.A. [Lawrence Livermore National Lab., CA (USA); Kundig, K.J.A.; Lyman, W.S.; Prager, M.; Meyers, J.R.; Servi, I.S. [CDA/INCRA Joint Advisory Group, Greenwich, CT (USA)

    1990-06-01

    This report combines six work units performed in FY`85--86 by the Copper Development Association and the International Copper Research Association under contract with the University of California. The work includes literature surveys and state-of-the-art summaries on several considerations influencing the feasibility of the use of copper-base materials for fabricating high-level nuclear waste packages for the proposed repository in tuff rock at Yucca Mountain, Nevada. The general conclusion from this work was that copper-base materials are viable candidates for inclusion in the materials selection process for this application. 55 refs., 48 figs., 22 tabs.

  20. Illustration of sampling-based approaches to the calculation of expected dose in performance assessments for the proposed high level radioactive waste repository at Yucca Mountain, Nevada.

    Energy Technology Data Exchange (ETDEWEB)

    Helton, Jon Craig (Arizona State University, Tempe, AZ); Sallaberry, Cedric J. PhD. (.; .)

    2007-04-01

    A deep geologic repository for high level radioactive waste is under development by the U.S. Department of Energy at Yucca Mountain (YM), Nevada. As mandated in the Energy Policy Act of 1992, the U.S. Environmental Protection Agency (EPA) has promulgated public health and safety standards (i.e., 40 CFR Part 197) for the YM repository, and the U.S. Nuclear Regulatory Commission has promulgated licensing standards (i.e., 10 CFR Parts 2, 19, 20, etc.) consistent with 40 CFR Part 197 that the DOE must establish are met in order for the YM repository to be licensed for operation. Important requirements in 40 CFR Part 197 and 10 CFR Parts 2, 19, 20, etc. relate to the determination of expected (i.e., mean) dose to a reasonably maximally exposed individual (RMEI) and the incorporation of uncertainty into this determination. This presentation describes and illustrates how general and typically nonquantitive statements in 40 CFR Part 197 and 10 CFR Parts 2, 19, 20, etc. can be given a formal mathematical structure that facilitates both the calculation of expected dose to the RMEI and the appropriate separation in this calculation of aleatory uncertainty (i.e., randomness in the properties of future occurrences such as igneous and seismic events) and epistemic uncertainty (i.e., lack of knowledge about quantities that are poorly known but assumed to have constant values in the calculation of expected dose to the RMEI).

  1. Hydrogen production: two stage processes for waste degradation.

    Science.gov (United States)

    Gómez, X; Fernández, C; Fierro, J; Sánchez, M E; Escapa, A; Morán, A

    2011-09-01

    The dark fermentation process generates hydrogen by biological means. It presents two main advantages: fulfilling requirements for mild operational conditions and gaining benefit from the residual biomass. The process itself may be seen as a pre-treatment step in a complete stabilisation chain, with the aim of attaining the valorisation of residual biomass. However, increasing the yield of H2 production is an imperative task. In this manuscript, a review of recent work in the field of fermentative hydrogen production is presented. As dark fermentation has a maximum yield of 33% (on sugars), a description is also presented of possible second stage processes for the degradation of dark fermentation effluents. Alternatives considered were photofermentation and bioelectrochemical systems (BES) as processes capable of converting fermentation sub-products into H2. Anaerobic digestion as a final stabilisation stage was also considered owing to the wide application of this technology in the treatment of bio-wastes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. The radiation resistance and cobalt biosorption activity of yeast strains isolated from the Lanyu low-level radioactive waste repository in Taiwan.

    Science.gov (United States)

    Li, Chia-Chin; Chung, Hsiao-Ping; Wen, Hsiao-Wei; Chang, Ching-Tu; Wang, Ya-Ting; Chou, Fong-In

    2015-08-01

    The ubiquitous nature of microbes has made them the pioneers in radionuclides adsorption and transport. In this study, the radiation resistance and nuclide biosorption capacity of microbes isolated from the Lanyu low-level radioactive waste (LLRW) repository in Taiwan was assessed, the evaluation of the possibility of using the isolated strain as biosorbents for (60)Co and Co (II) from contaminated aqueous solution and the potential impact on radionuclides release. The microbial content of solidified waste and broken fragments of containers at the Lanyu LLRW repository reached 10(5) CFU/g. Two yeast strains, Candida guilliermondii (CT1) and Rhodotorula calyptogenae (RT1) were isolated. The radiation dose necessary to reduce the microbial count by one log cycle of CT1 and RT1 was 2.1 and 0.8 kGy, respectively. Both CT1 and RT1 can grow under a radiation field with dose rate of 6.8 Gy/h, about 100 times higher than that on the surface of the LLRW container in Lanyu repository. CT1 and RT1 had the maximum (60)Co biosorption efficiency of 99.7 ± 0.1% and 98.3 ± 0.2%, respectively in (60)Co aqueous solution (700 Bq/mL), and the (60)Co could stably retained for more than 30 days in CT 1. Nearly all of the Co was absorbed and reached equilibrium within 1 h by CT1 and RT1 in the 10 μg/g Co (II) aqueous solution. Biosorption efficiency test showed almost all of the Co (II) was adsorbed by CT1 in 20 μg/g Co (II) aqueous solution, the efficiency of biosorption by RT1 in 10 μg/g of Co (II) was lower. The maximum Co (II) sorption capacity of CT1 and RT1 was 5324.0 ± 349.0 μg/g (dry wt) and 3737.6 ± 86.5 μg/g (dry wt), respectively, in the 20 μg/g Co (II) aqueous solution. Experimental results show that microbial activity was high in the Lanyu LLRW repository in Taiwan. Two isolated yeast strains, CT1 and RT1 have high potential for use as biosorbents for (60)Co and Co (II) from contaminated aqueous solution, on the other hand, but may have the

  3. Final Systems Development Report for the Clark County Socioeconomic Impact Assessment of the Proposed High-Level Nuclear Waste Repository at Yucca Mountain, NV

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-06-18

    The Systems Development Report represents the third major step in the Clark County Socioeconomic Impact Assessment of the Proposed High-Level Nuclear Waste Repository at Yucca Mound Nevada. The first of these steps was to forge a Research Design that would serve as a guide for the overall research process. The second step was the construction of the Base Case, the purpose of which was to describe existing conditions in Clark County in the specified analytic areas of Economic-Demographic/Fiscal, Emergency Planning and Management, Transportation and Sociocultural analysis. The base case description will serve as a basis for assessing changes in these topic areas that might result from the Yucca Mountain project. These changes will be assessed by analyzing conditions with and without repository development in the county. Prior to performing such assessments, however, the snapshot type of data found in the base case must be operationalized or systematized to allow for more dynamic data utilization. In other words, a data system that can be used to analyze the consequences of the introduction of different variables (or variable values) in the Clark County context must be constructed. Such a system must be capable of being updated through subsequent data collection and monitoring efforts to both provide a rolling base case and supply information necessary to construct trend analyses. For example, during the Impact Assessment phase of the study process, the without repository analysis is accomplished by analyzing growth for the county given existing conditions and likely trends. These data are then compared to the with Yucca Mountain project conditions anticipated for the county. Similarly, once the emergency planning management and response needs associated with the repository are described, these needs will be juxtaposed against existing (and various future) capacity(ies) in order to determine the nature and magnitude of impacts in this analytic area. Analogous tasks

  4. Final base case community analysis: Indian Springs, Nevada for the Clark County socioeconomic impact assessment of the proposed high- level nuclear waste repository at Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-06-18

    This document provides a base case description of the rural Clark County community of Indian Springs in anticipation of change associated with the proposed high-level nuclear waste repository at Yucca Mountain. As the community closest to the proposed site, Indian Springs may be seen by site characterization workers, as well as workers associated with later repository phases, as a logical place to live. This report develops and updates information relating to a broad spectrum of socioeconomic variables, thereby providing a `snapshot` or `base case` look at Indian Springs in early 1992. With this as a background, future repository-related developments may be analytically separated from changes brought about by other factors, thus allowing for the assessment of the magnitude of local changes associated with the proposed repository. Given the size of the community, changes that may be considered small in an absolute sense may have relatively large impacts at the local level. Indian Springs is, in many respects, a unique community and a community of contrasts. An unincorporated town, it is a small yet important enclave of workers on large federal projects and home to employees of small- scale businesses and services. It is a rural community, but it is also close to the urbanized Las Vega Valley. It is a desert community, but has good water resources. It is on flat terrain, but it is located within 20 miles of the tallest mountains in Nevada. It is a town in which various interest groups diverge on issues of local importance, but in a sense of community remains an important feature of life. Finally, it has a sociodemographic history of both surface transience and underlying stability. If local land becomes available, Indian Springs has some room for growth but must first consider the historical effects of growth on the town and its desired direction for the future.

  5. YUCCA MOUNTAIN PROJECT RECOMMENDATION BY THE SECRETARY OF ENERGY REGARDING THE SUITABILITY OF THE YUCCA MOUNTAIN SITE FOR A REPOSITORY UNDER THE NUCLEAR WASTE POLICY ACT OF 1982

    Energy Technology Data Exchange (ETDEWEB)

    NA

    2002-03-26

    For more than half a century, since nuclear science helped us win World War II and ring in the Atomic Age, scientists have known that !he Nation would need a secure, permanent facility in which to dispose of radioactive wastes. Twenty years ago, when Congress adopted the Nuclear Waste Policy Act of 1982 (NWPA or ''the Act''), it recognized the overwhelming consensus in the scientific community that the best option for such a facility would be a deep underground repository. Fifteen years ago, Congress directed the Secretary of Energy to investigate and recommend to the President whether such a repository could be located safely at Yucca Mountain, Nevada. Since then, our country has spent billions of dollars and millions of hours of research endeavoring to answer this question. I have carefully reviewed the product of this study. In my judgment, it constitutes sound science and shows that a safe repository can be sited there. I also believe that compelling national interests counsel in favor of proceeding with this project. Accordingly, consistent with my responsibilities under the NWPA, today I am recommending that Yucca Mountain be developed as the site for an underground repository for spent fuel and other radioactive wastes. The first consideration in my decision was whether the Yucca Mountain site will safeguard the health and safety of the people, in Nevada and across the country, and will be effective in containing at minimum risk the material it is designed to hold. Substantial evidence shows that it will. Yucca Mountain is far and away the most thoroughly researched site of its kind in the world. It is a geologically stable site, in a closed groundwater basin, isolated on thousands of acres of Federal land, and farther from any metropolitan area than the great majority of less secure, temporary nuclear waste storage sites that exist in the country today. This point bears emphasis. We are not confronting a hypothetical problem. We have a

  6. On the importance of coupled THM processes to predict the long-term response of a generic salt repository for high-level nuclear waste

    Science.gov (United States)

    Blanco Martin, L.; Rutqvist, J.; Birkholzer, J. T.

    2013-12-01

    Salt is a potential medium for the underground disposal of nuclear waste because it has several assets, in particular its ability to creep and heal fractures generated by excavation and its water and gas tightness in the undisturbed state. In this research, we focus on disposal of heat-generating nuclear waste (such as spent fuel) and we consider a generic salt repository with in-drift emplacement of waste packages and subsequent backfill of the drifts with run-of-mine crushed salt. As the natural salt creeps, the crushed salt backfill gets progressively compacted and an engineered barrier system is subsequently created. In order to evaluate the integrity of the natural and engineered barriers over the long-term, it is important to consider the coupled effects of the thermal, hydraulic and mechanical processes that take place. In particular, the results obtained so far show how the porosity reduction of the crushed salt affects the saturation and pore pressure evolution throughout the repository, both in time and space. Such compaction is induced by the stress and temperature regime within the natural salt. Also, transport properties of the host rock are modified not only by thermo-mechanically and hydraulically-induced damaged processes, but also by healing/sealing of existing fractures. In addition, the THM properties of the backfill evolve towards those of the natural salt during the compaction process. All these changes are based on dedicated laboratory experiments and on theoretical considerations [1-3]. Different scenarios are modeled and compared to evaluate the relevance of different processes from the perspective of effective nuclear waste repositories. The sensitivity of the results to some parameters, such as capillarity, is also addressed. The simulations are conducted using an updated version of the TOUGH2-FLAC3D simulator, which is based on a sequential explicit method to couple flow and geomechanics [4]. A new capability for large strains and creep

  7. Geology of the Yucca Mountain Region, Chapter in Stuckless, J.S., ED., Yucca Mountain, Nevada - A Proposed Geologic Repository for High-Level Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    J.S. Stuckless; D. O' Leary

    2006-09-25

    Yucca Mountain has been proposed as the site for the Nation's first geologic repository for high-level radioactive waste. This chapter provides the geologic framework for the Yucca Mountain region. The regional geologic units range in age from late Precambrian through Holocene, and these are described briefly. Yucca Mountain is composed dominantly of pyroclastic units that range in age from 11.4 to 15.2 Ma. The proposed repository would be constructed within the Topopah Spring Tuff, which is the lower of two major zoned and welded ash-flow tuffs within the Paintbrush Group. The two welded tuffs are separated by the partly to nonwelded Pah Canyon Tuff and Yucca Mountain Tuff, which together figure prominently in the hydrology of the unsaturated zone. The Quaternary deposits are primarily alluvial sediments with minor basaltic cinder cones and flows. Both have been studied extensively because of their importance in predicting the long-term performance of the proposed repository. Basaltic volcanism began about 10 Ma and continued as recently as about 80 ka with the eruption of cones and flows at Lathrop Wells, approximately 10 km south-southwest of Yucca Mountain. Geologic structure in the Yucca Mountain region is complex. During the latest Paleozoic and Mesozoic, strong compressional forces caused tight folding and thrust faulting. The present regional setting is one of extension, and normal faulting has been active from the Miocene through to the present. There are three major local tectonic domains: (1) Basin and Range, (2) Walker Lane, and (3) Inyo-Mono. Each domain has an effect on the stability of Yucca Mountain.

  8. Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.

    Energy Technology Data Exchange (ETDEWEB)

    Hadgu, Teklu [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Matteo, Edward N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    An example case is presented for testing analytical thermal models. The example case represents thermal analysis of a generic repository in bedded salt at 500 m depth. The analysis is part of the study reported in Matteo et al. (2016). Ambient average ground surface temperature of 15°C, and a natural geothermal gradient of 25°C/km, were assumed to calculate temperature at the near field. For generic salt repository concept crushed salt backfill is assumed. For the semi-analytical analysis crushed salt thermal conductivity of 0.57 W/m-K was used. With time the crushed salt is expected to consolidate into intact salt. In this study a backfill thermal conductivity of 3.2 W/m-K (same as intact) is used for sensitivity analysis. Decay heat data for SRS glass is given in Table 1. The rest of the parameter values are shown below. Results of peak temperatures at the waste package surface are given in Table 2.

  9. Specifications for the development of a fully three-dimensional numerical groundwater model for regional mass transport of radionuclides from a deep waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Prickett, T.A.

    1980-04-01

    Specifications are given which are necessary to develop a three-dimensional numerical model capable of simulating regional mass transport of radionuclides from a deep waste repository. The model to be developed will include all of the significant mass transport processes including flow, chemical, and thermal advection, mechanical dispersion, molecular diffusion, ion exchange reactions, and radioactive decay. The model specifications also include that density and viscosity fluid properties be functions of pressure, temperature, and concentration and take into account fluid and geologic heterogenieties by allowing possible assignment of individual values to every block of the model. The model specifications furthermore include the repository shape, input/output information, boundary conditions, and the need for documentation and a user's manual. Model code validation can be accomplished with the included known analytical or laboratory solutions. It is recommended that an existing finite-difference model (developed by INTERCOMP and INTERA, Inc.) be used as a starting point either as an acceptable basic code for modification or as a pattern for the development of a completely different numerical scheme. A ten-step plan is given to outline the general procedure for development of the code.

  10. FEBEX project: full-scale engineered barriers experiment for a deep geological repository for high level radioactive waste in crystalline host rock

    Energy Technology Data Exchange (ETDEWEB)

    Alberid, J.; Barcala, J. M.; Campos, R.; Cuevas, A. M.; Fernandez, E. [Ciemat. Madrid (Spain)

    2000-07-01

    FEBEX has the multiple objective of demonstrating the feasibility of manufacturing, handling and constructing the engineered barriers and of developing codes for the thermo-hydro-mechanical and thermo-hydro-geochemical performance assessment of a deep geological repository for high level radioactive wastes. These objectives require integrated theoretical and experimental development work. The experimental work consists of three parts: an in situ test, a mock-up test and a series of laboratory tests. The experiments is based on the Spanish reference concept for crystalline rock, in which the waste capsules are placed horizontally in drifts surround by high density compacted bentonite blocks. In the two large-scale tests, the thermal effects of the wastes were simulated by means of heaters; hydration was natural in the in situ test and controlled in the mock-up test. The large-scale tests, with their monitoring systems, have been in operation for more than two years. the demonstration has been achieved in the in situ test and there are great expectation that numerical models sufficiently validated for the near-field performance assessment will be achieved. (Author)

  11. Milestones for Selection, Characterization, and Analysis of the Performance of a Repository for Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain.

    Energy Technology Data Exchange (ETDEWEB)

    Rechard, Robert P.

    2014-02-01

    This report presents a concise history in tabular form of events leading up to site identification in 1978, site selection in 1987, subsequent characterization, and ongoing analysis through 2008 of the performance of a repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain in southern Nevada. The tabulated events generally occurred in five periods: (1) commitment to mined geologic disposal and identification of sites; (2) site selection and analysis, based on regional geologic characterization through literature and analogous data; (3) feasibility analysis demonstrating calculation procedures and importance of system components, based on rough measures of performance using surface exploration, waste process knowledge, and general laboratory experiments; (4) suitability analysis demonstrating viability of disposal system, based on environment-specific laboratory experiments, in-situ experiments, and underground disposal system characterization; and (5) compliance analysis, based on completed site-specific characterization. Because the relationship is important to understanding the evolution of the Yucca Mountain Project, the tabulation also shows the interaction between four broad categories of political bodies and government agencies/institutions: (a) technical milestones of the implementing institutions, (b) development of the regulatory requirements and related federal policy in laws and court decisions, (c) Presidential and agency directives and decisions, and (d) critiques of the Yucca Mountain Project and pertinent national and world events related to nuclear energy and radioactive waste.

  12. Swiss plans for deep geological repositories for radioactive wastes - Basics for communication at the localities affected; Sachplan geologische Tiefenlager. Forschungsprojekt 'Kommunikation mit der Gesellschaft': Grundlagen fuer die Kommunikation in den Standortregionen

    Energy Technology Data Exchange (ETDEWEB)

    Gallego Carrera, D.; Renn, O.; Dreyer, M.

    2009-06-15

    This report for the Swiss Federal Office of Energy (SFOE) discusses the concept of how information concerning deep geological repositories for radioactive wastes should be presented and communicated to those in the areas which have been designated as potential sites for the repositories. Communication basics based on scientific knowledge in this area are discussed. The importance of a concept for general communication and risk-communication as a particular challenge are discussed. Trust and transparency are quoted as being indispensable in this connection. Ways of dealing with various target audiences and the media are examined. The report is concluded with a check-list that deals with important questions arising from the process of communicating information on deep geological repositories for radioactive wastes

  13. VESPA. Behaviour of long-lived fission and activation products in the nearfield of a nuclear waste repository and the possibilities of their retention

    Energy Technology Data Exchange (ETDEWEB)

    Bischofer, Barbara; Hagemann, Sven [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Altmaier, Marcus [Karlsruher Institut fuer Technologie (KIT) (Germany); and others

    2016-06-15

    The present document is the final report of the Joint Research Project VESPA (Behaviour of Long-lived Fission and Activation Products in the Near Field of a Nuclear Waste Repository and the Possibilities of Their Retention), started in July 2010 with a duration of four years. The following four institutions were collaborative Partners in VESPA: - Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH - Institut fuer Energie- und Klimaforschung, IEK-6: Nukleare Entsorgung und Reaktorsicherheit, Forschungszentrum Juelich (FZJ) - Institut fuer Ressourcenoekologie (IRE), Helmholtz-Zentrum Dresden-Rossendorf (HZDR) - Institut fuer Nukleare Entsorgung (INE), Karlsruher Institut fuer Technologie (KIT) VESPA was funded by the German Federal Ministry of Economics and Energy (BMWi) under the contract numbers 02 E 10770 (GRS), 02 E 10780 (FZJ-IEF-6), 02 E 10790 (HZDR-IRE), 02 E 10800 (KIT-INE).

  14. Pre-construction geologic section along the cross drift through the potential high-level radioactive waste repository, Yucca Mountain, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Potter, C.J.; Day, W.C.; Sweetkind, D.S. [Geological Survey, Denver, CO (United States); Juan, C.S.; Drake, R.M. II [Pacific Western Technologies, Ltd., Denver, CO (United States)

    1998-12-31

    As part of the Site Characterization effort for the US Department of Energy`s Yucca Mountain Project, tunnels excavated by tunnel boring machines provide access to the volume of rock that is under consideration for possible underground storage of high-level nuclear waste beneath Yucca Mountain, Nevada. The Exploratory Studies Facility, a 7.8-km-long, 7.6-m-diameter tunnel, has been excavated, and a 2.8-km-long, 5-m-diameter Cross Drift will be excavated in 1998 as part of the geologic, hydrologic and geotechnical evaluation of the potential repository. The southwest-trending Cross Drift branches off of the north ramp of the horseshoe-shaped Exploratory Studies Facility. This report summarizes an interpretive geologic section that was prepared for the Yucca Mountain Project as a tool for use in the design and construction of the Cross Drift.

  15. Preliminary site description Laxemar stage 2.1. Feedback for completion of the site investigation including input from safety assessment and repository engineering

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-09-15

    The Laxemar subarea is the focus for the complete site investigations in the Simpevarp area. The south and southwestern parts of the subarea (the so-called 'focused area') have been designated for focused studies during the remainder of the site investigations. This area, some 5.3 square kilometres in size, is characterised on the surface by an arc shaped body of quartz monzodiorite gently dipping to the north, flanked in the north and south by Aevroe granite. The current report documents work conducted during stage 2.1 of the site-descriptive modelling of the Laxemar subarea. The primary objective of the work performed is to provide feedback to the site investigations at Laxemar to ensure that adequate and timely data and information are obtained during the remaining investigation stage. The work has been conducted in cooperation with the site investigation team at Laxemar and representatives from safety assessment and repository engineering. The principal aim of this joint effort has been to safeguard that adequate data are collected that resolve the remaining issues/uncertainties which are of importance for repository layout and long-term safety. The proposed additional works presented in this report should be regarded as recommended additions and/or modifications in relation to the CSI programme published early 2006. The overall conclusion of the discipline-wise review of critical issues is that the CSI programme overall satisfies the demands to resolve the remaining uncertainties. This is interpreted to be partly a result of the close interaction between the site modelling team, site investigation team and the repository engineering teams, which has been in operation since early 2005. In summary, the performed interpretations and modelling have overall confirmed the version 1.2 results. The exception being Hydrogeology where the new Laxemar 2.1 borehole data suggest more favourable conditions in the south and west parts of the focused area compared

  16. Critical assessment of seismic and geomechanics literature related to a high-level nuclear waste underground repository

    Energy Technology Data Exchange (ETDEWEB)

    Kana, D.D.; Vanzant, B.W.; Nair, P.K. [Southwest Research Inst., San Antonio, TX (USA). Center for Nuclear Waste Regulatory Analyses; Brady, B.H.G. [ITASCA Consulting Group, Inc., Minneapolis, MN (USA)

    1991-06-01

    A comprehensive literature assessment has been conducted to determine the nature and scope of technical information available to characterize the seismic performance of an underground repository and associated facilities. Significant deficiencies were identified in current practices for prediction of seismic response of underground excavations in jointed rock. Conventional analytical methods are based on a continuum representation of the host rock mass. Field observations and laboratory experiments indicate that, in jointed rock, the behavior of the joints controls the overall performance of underground excavations. Further, under repetitive seismic loading, shear displacement develops progressively at block boundaries. Field observations correlating seismicity and groundwater conditions have provided significant information on hydrological response to seismic events. However, lack of a comprehensive model of geohydrological response to seismicity has limited the transportability conclusions from field observations. Based on the literature study, matters requiring further research in relation to the Yucca Mountain repository are identified. The report focuses on understanding seismic processes in fractured tuff, and provides a basis for work on the geohydrologic response of a seismically disturbed rock mass. 220 refs., 43 figs., 11 tabs.

  17. Effect of ammoniacal nitrogen on one-stage and two-stage anaerobic digestion of food waste

    Energy Technology Data Exchange (ETDEWEB)

    Ariunbaatar, Javkhlan, E-mail: jaka@unicas.it [Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Via Di Biasio 43, 03043 Cassino, FR (Italy); UNESCO-IHE Institute for Water Education, Westvest 7, 2611 AX Delft (Netherlands); Scotto Di Perta, Ester [Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples (Italy); Panico, Antonio [Telematic University PEGASO, Piazza Trieste e Trento, 48, 80132 Naples (Italy); Frunzo, Luigi [Department of Mathematics and Applications Renato Caccioppoli, University of Naples Federico II, Via Claudio, 21, 80125 Naples (Italy); Esposito, Giovanni [Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Via Di Biasio 43, 03043 Cassino, FR (Italy); Lens, Piet N.L. [UNESCO-IHE Institute for Water Education, Westvest 7, 2611 AX Delft (Netherlands); Pirozzi, Francesco [Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples (Italy)

    2015-04-15

    Highlights: • Almost 100% of the biomethane potential of food waste was recovered during AD in a two-stage CSTR. • Recirculation of the liquid fraction of the digestate provided the necessary buffer in the AD reactors. • A higher OLR (0.9 gVS/L·d) led to higher accumulation of TAN, which caused more toxicity. • A two-stage reactor is more sensitive to elevated concentrations of ammonia. • The IC{sub 50} of TAN for the AD of food waste amounts to 3.8 g/L. - Abstract: This research compares the operation of one-stage and two-stage anaerobic continuously stirred tank reactor (CSTR) systems fed semi-continuously with food waste. The main purpose was to investigate the effects of ammoniacal nitrogen on the anaerobic digestion process. The two-stage system gave more reliable operation compared to one-stage due to: (i) a better pH self-adjusting capacity; (ii) a higher resistance to organic loading shocks; and (iii) a higher conversion rate of organic substrate to biomethane. Also a small amount of biohydrogen was detected from the first stage of the two-stage reactor making this system attractive for biohythane production. As the digestate contains ammoniacal nitrogen, re-circulating it provided the necessary alkalinity in the systems, thus preventing an eventual failure by volatile fatty acids (VFA) accumulation. However, re-circulation also resulted in an ammonium accumulation, yielding a lower biomethane production. Based on the batch experimental results the 50% inhibitory concentration of total ammoniacal nitrogen on the methanogenic activities was calculated as 3.8 g/L, corresponding to 146 mg/L free ammonia for the inoculum used for this research. The two-stage system was affected by the inhibition more than the one-stage system, as it requires less alkalinity and the physically separated methanogens are more sensitive to inhibitory factors, such as ammonium and propionic acid.

  18. The Radiological and Thermal Characteristics of Fission Waste from a Deep-Burn Fusion-Fission Hybrid (LIFE) and Implications for Repository Performance

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, H F; Blink, J; Farmer, J; Latkowski, J; Kramer, K

    2009-09-08

    We are studying the use of a Laser Inertial-confinement Fusion Engine (LIFE) to drive a hybrid fusion-fission system that can generate electrical power and/or burn nuclear waste. The system uses the neutrons from laser driven ICF to produce tritium and to drive nuclear reactions in a subcritical fission blanket. The fusion neutron source obviates the need for a self-sustaining chain reaction in the fission blanket. Either fissile or fertile could be used as fission fuel, thus eliminating the need for isotopic enrichment. The 'driven' system potentially allows very high levels of burnup to be reached, extracting a large fraction of the available energy in the fission fuel without the need for reprocessing. In this note, we discuss the radionuclide inventory of a depleted uranium (DU) fuel burned to greater than 95% FIMA (Fissions per Initial heavy Metal Atom), the implications for thermal management of the resulting waste, and the implications of this waste for meeting the dose standards for releases from a geological repository for high-level waste. The fission waste discussed here would be that produced by a LIFE hybrid with a 500-MW fusion source. The fusion neutrons are multiplied and moderated by a sequence of concentric shells of materials before encountering the fission fuel, and fission in this region is largely due to thermal neutrons. The fission blanket consists of 40 metric tons (MT) of DU, assumed to be in the form of TRISO-like UOC fuel particles embedded in 2-cm-diameter graphite pebbles. (It is recognized that TRISO-based fuel may not reach the high burnup of the fertile fuel considered here, and other fuel options are being investigated. We postulate the existence of a fuel that can reach >95% FIMA so that the waste disposal implications of high burnup can be assessed.) The engine and plant design considered here would receive one load of fission fuel and produce {approx}2 GWt of power (fusion + fission) over its 50- to 70-year lifetime

  19. Review and analysis of hydrogeologic conditions near the site of a potential nuclear-waste repository, Eddy and Lea counties, New Mexico

    Science.gov (United States)

    Mercer, Jerry W.; Orr, Brennon R.

    1977-01-01

    This interim report reviews and summarizes the hydrogeology of rocks associated with the Permian salt beds (Castile and Salado Formations) of Los Medanos area in southeastern New Mexico. The information will be considered, together with other factors, in the preparation of an analysis of the impact of a potential nuclear-waste repository on the environment. Most of the geologic units in and adjacent to the Permian salt deposits are characterized by low permeabilities and highly mineralized water. Sandstone of the Delaware Mountain Group, which underlies the salt, has an average hydraulic conductivity of 0.16 ft/d and an average porosity of 15.65 percent. Flow is north-northeastward toward the margin of the Capitan Limestone, at velocities ranging from 0.0005 to 0.0008 ft/d. The Capitan Limestone, a relatively high yielding limestone-reef aquifer adjacent to the study area, has transmissivity values ranging from 500 sq ft/d to 10,000 sq ft/d and an average hydraulic conductivity of about 5 ft/d. Water movement west of the Pecos River is northeastward in the reef, with discharge at Carlsbad Springs. East of the Pecos River, water moves at very low rates and the direction of movement is uncertain. The Castile and Salado Formations, which might be used to contain the nuclear waste, have a few isolated pockets of brine and gas, but generally transmit little or no ground water. (Woodard-USGS)

  20. Radionuclide transport in the vicinity of the repository and associated complementary cumulative distribution functions in the 1996 performance assessment for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    STOCKMAN,CHRISTINE T.; GARNER,J.W.; HELTON,JON CRAIG; JOHNSON,JAY DEAN; SHINTA,A.; SMITH,L.N.

    2000-05-22

    The following topics related to radionuclide transport in the vicinity of the repository in the 1996 performance assessment for the Waste Isolation Pilot Plant are presented (1) mathematical description of models, (2) uncertainty and sensitivity analysis results arising from subjective (i.e., epistemic) uncertainty for individual releases, (3) construction of complementary cumulative distribution functions (CCDFs) arising from stochastic (i.e., aleatory) uncertainty, and (4) uncertainty and sensitivity analysis results for CCDFs. The presented results indicate that no releases to the accessible environment take place due to radionuclide movement through the anhydrite marker beds, through the Dewey Lake Red Beds or directly to the surface, and also that the releases to the Culebra Dolomite are small. Even when the effects of uncertain analysis inputs are taken into account, the CCDFs for release to the Culebra Dolomite fall to the left of the boundary line specified in the US Environmental Protection Agency's standard for the geologic disposal of radioactive waste (40 CFR 191, 40 CFR 194).

  1. Progress in evaluation of radionuclide geochemical information developed by DOE high-level nuclear waste repository site projects; Report for October 1987--June 1989

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, R.E.; Arnold, W.D.; O`Kelley, G.D.; Case, F.I.; Land, J.F.

    1989-08-01

    Information that is being developed by projects within the Department of Energy (DOE) pertinent to the potential geochemical behavior of radionuclides at candidate sites for a high-level radioactive waste repository is being evaluated by Oak Ridge National Laboratory (ORNL) for the Nuclear Regulatory Commission (NRC). During this report period, all experiments were conducted with tuff from the proposed high-level nuclear waste site at Yucca Mountain, Nevada. The principal emphasis in this report period was on column studies of migration of uranium and technetium in water from well J-13 at the Yucca Mountain site. Columns 1 cm in diameter and about 5 cm long were constructed and carefully packed with ground tuff. The characteristics of the columns were tested by determination of elution curves of tritium and TcO{sub 4}{sup {minus}}. Elution peaks obtained in past studies with uranium were asymmetrical and the shapes were often complex, observations that suggested irreversibilities in the sorption reaction. To try to understand these observations, the effects of flow rate and temperature on uranium migration were studied in detail. Sorption ratios calculated from the elution peaks became larger as the flow rate decreased and as the temperature increased. These observations support the conclusion that the sorption of uranium is kinetically hindered. To confirm this, batch sorption ratio experiments were completed for uranium as a function of time for a variety of conditions.

  2. Public Involvement in Repository Site Selection for Nuclear Waste: Towards a more Dynamic View in Decision-Making Processes

    Energy Technology Data Exchange (ETDEWEB)

    Kruetli, Pius; Stauffacher, Michael; Flueeler, Thomas; Scholz, Roland W. [ETH Zuerich (Switzerland). lnst. for Human-Environment Systems (HES)

    2006-09-15

    This paper discusses possibilities of public involvement in radioactive waste management. A general overview of the radioactive waste issue is presented referring to a proposed model of the respective decision-making process. Based on the well known participation ladder by Arnstein, we differentiate various intensities of public involvement. A matrix with public involvement and the decision-making process is introduced and three prototypical patterns are discussed. We conclude that time frame, the level of public involvement and the mission have to be considered as well as techniques and the overarching context - all in all, a systematic and dynamic approach for public involvement is needed.

  3. Experimental study of the diffusion of {sup 1}37Cs in mortars used in nuclear waste repositories medium and low activity; Estudio experimental de la difusion de {sup 1}37Cs en morteros utilizados en almacenamientos de residuos radiactivos de media y baja actividad

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Gutierrez, M.; Missana, T.; Mingarro, M.; Morejon, J.

    2013-07-01

    Cement is a largely used material in radioactive waste repository for conditioning and isolating the waste. In this study, the adequacy of different type of cement to act as barrier to the {sup 1}37Cs migration has been analyzed. {sup 1}37Cs is a very important fission product in low and medium radioactive waste repository. As diffusion is the main transport process in cementitious materials, in this study the diffusion behavior of the radionuclide was especially evaluated.

  4. Chemical analysis of simulated high level waste glasses to support stage III sulfate solubility modeling

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-17

    The U.S. Department of Energy (DOE), Office of Environmental Management (EM) is sponsoring an international, collaborative project to develop a fundamental model for sulfate solubility in nuclear waste glass. The solubility of sulfate has a significant impact on the achievable waste loading for nuclear waste forms within the DOE complex. These wastes can contain relatively high concentrations of sulfate, which has low solubility in borosilicate glass. This is a significant issue for low-activity waste (LAW) glass and is projected to have a major impact on the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Sulfate solubility has also been a limiting factor for recent high level waste (HLW) sludge processed at the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF). The low solubility of sulfate in glass, along with melter and off-gas corrosion constraints, dictate that the waste be blended with lower sulfate concentration waste sources or washed to remove sulfate prior to vitrification. The development of enhanced borosilicate glass compositions with improved sulfate solubility will allow for higher waste loadings and accelerate mission completion.The objective of the current scope being pursued by SHU is to mature the sulfate solubility model to the point where it can be used to guide glass composition development for DWPF and WTP, allowing for enhanced waste loadings and waste throughput at these facilities. A series of targeted glass compositions was selected to resolve data gaps in the model and is identified as Stage III. SHU fabricated these glasses and sent samples to SRNL for chemical composition analysis. SHU will use the resulting data to enhance the sulfate solubility model and resolve any deficiencies. In this report, SRNL provides chemical analyses for the Stage III, simulated HLW glasses fabricated by SHU in support of the sulfate solubility model development.

  5. Impact assessment of ionizing radiation on human and non-human biota from the vicinity of a near-surface radioactive waste repository.

    Science.gov (United States)

    Nedveckaite, T; Gudelis, A; Vives i Batlle, J

    2013-05-01

    This work describes the radiological assessment of the near-surface Maisiagala radioactive waste repository (Lithuania) over the period 2005-2012, with focus on water pathways and special emphasis on tritium. The study includes an assessment of the effect of post-closure upgrading, the durability of which is greater than 30 years. Both human and terrestrial non-human biota are considered, with local low-intensity forestry and small farms being the area of concern. The radiological exposure was evaluated using the RESRAD-OFFSITE, RESRAD-BIOTA and ERICA codes in combination with long-term data from a dedicated environmental monitoring programme. All measurements were performed at the Lithuanian Institute of Physics as part of this project. It is determined that, after repository upgrading, radiological exposure to humans are significantly lower than the human dose constraint of 0.2 mSv/year valid in the Republic of Lithuania. Likewise, for non-human biota, dose rates are below the ERICA/PROTECT screening levels. The potential annual effective inhalation dose that could be incurred by the highest-exposed human individual (which is due to tritiated water vapour airborne release over the most exposed area) does not exceed 0.1 μSv. Tritium-labelled drinking water appears to be the main pathway for human impact, representing about 83 % of the exposure. Annual committed effective dose (CED) values for members of the public consuming birch sap as medical practice are calculated to be several orders of magnitude below the CEDs for the same location associated with drinking of well water. The data presented here indicate that upper soil-layer samples may not provide a good indication of potential exposure to terrestrial deep-rooted trees, as demonstrated by an investigation of stratified (3)H in soil moisture, expressed on a wet soil mass basis, in an area with subsurface contamination.

  6. Modeling of Coupled Thermo-Hydro-Mechanical-Chemical Processes for Bentonite in a Clay-rock Repository for Heat-generating Nuclear Waste

    Science.gov (United States)

    Xu, H.; Rutqvist, J.; Zheng, L.; Birkholzer, J. T.

    2016-12-01

    Engineered Barrier Systems (EBS) that include a bentonite-based buffer are designed to isolate the high-level radioactive waste emplaced in tunnels in deep geological formations. The heat emanated from the waste can drive the moisture flow transport and induce strongly coupled Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) processes within the bentonite buffer and may also impact the evolution of the excavation disturbed zone and the sealing between the buffer and walls of an emplacement tunnel The flow and contaminant transport potential along the disturbed zone can be minimized by backfilling the tunnels with bentonite, if it provides enough swelling stress when hydrated by the host rock. The swelling capability of clay minerals within the bentonite is important for sealing gaps between bentonite block, and between the EBS and the surrounding host rock. However, a high temperature could result in chemical alteration of bentonite-based buffer and backfill materials through illitization, which may compromise the function of these EBS components by reducing their plasticity and capability to swell under wetting. Therefore, an adequate THMC coupling scheme is required to understand and to predict the changes of bentonite for identifying whether EBS bentonite can sustain higher temperatures. More comprehensive links between chemistry and mechanics, taking advantage of the framework provided by a dual-structure model, named Barcelona Expansive Model (BExM), was implemented in TOUGHREACT-FLAC3D and is used to simulate the response of EBS bentonite in in clay formation for a generic case. The current work is to evaluate the chemical changes in EBS bentonite and the effects on the bentonite swelling stress under high temperature. This work sheds light on the interaction between THMC processes, evaluates the potential deterioration of EBS bentonite and supports the decision making in the design of a nuclear waste repository in light of the maximum allowance

  7. Gamma-ray spectrometry method used for radioactive waste drums characterization for final disposal at National Repository for Low and Intermediate Radioactive Waste--Baita, Romania.

    Science.gov (United States)

    Done, L; Tugulan, L C; Dragolici, F; Alexandru, C

    2014-05-01

    The Radioactive Waste Management Department from IFIN-HH, Bucharest, performs the conditioning of the institutional radioactive waste in concrete matrix, in 200 l drums with concrete shield, for final disposal at DNDR - Baita, Bihor county, in an old exhausted uranium mine. This paper presents a gamma-ray spectrometry method for the characterization of the radioactive waste drums' radionuclides content, for final disposal. In order to study the accuracy of the method, a similar concrete matrix with Portland cement in a 200 l drum was used. © 2013 The Authors. Published by Elsevier Ltd All rights reserved.

  8. Selecting a repository site

    Energy Technology Data Exchange (ETDEWEB)

    Ghovanlou, A.H. (MITRE Corp., McLean, VA); Ettlinger, L.; Cotton, T.; Barnard, W.; Siever, R.

    1982-01-01

    Present knowledge about the regional and local geologic predictions as it relates to waste repository sites and some related knowledge gained from oil and mining explorations are summarized. The types of geologic testing involved in selecting a repository site are described, and a simple analytic scheme for estimating the costs of such a program is discussed. This scheme is based on the sequential accumulation of knowledge throughout the process of siting. It is concluded that several sites should be investigated simultaneously since there is a trade-off to be made between the economic costs of carrying forward all the sites that pass the screening process and the political costs of selecting from a limited number of qualified sites. This would help to insure that a qualified site would be publicly acceptable at some point in the future. (BLM)

  9. Hydrogen and methane production from household solid waste in the two-stage fermentation process

    DEFF Research Database (Denmark)

    Lui, D.; Liu, D.; Zeng, Raymond Jianxiong

    2006-01-01

    A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H-2/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH4/g VS....... The optimum PH range for hydrogen production in this system was in the range from 5 to 5.5. The short hydraulic retention time (2 days) applied in the first stage was enough to separate acidogenesis from methanogenesis. No additional control for preventing methanogenesis in the first stage was necessary...

  10. Overcoming the bottlenecks of anaerobic digestion of olive mill solid waste by two-stage fermentation.

    Science.gov (United States)

    Stoyanova, Elitza; Lundaa, Tserennyam; Bochmann, Günther; Fuchs, Werner

    2017-02-01

    Two-stage anaerobic digestion (AD) of two-phase olive mill solid waste (OMSW) was applied for reducing the inhibiting factors by optimizing the acidification stage. Single-stage AD and co-fermentation with chicken manure were conducted coinstantaneous for direct comparison. Degradation of the polyphenols up to 61% was observed during the methanogenic stage. Nevertheless the concentration of phenolic substances was still high; the two-stage fermentation remained stable at OLR 1.5 kgVS/m³day. The buffer capacity of the system was twice as high, compared to the one-stage fermentation, without additives. The two-stage AD was a combined process - thermophilic first stage and mesophilic second stage, which pointed out to be the most profitable for AD of OMSW for the reduced hydraulic retention time (HRT) from 230 to 150 days, and three times faster than the single-stage and the co-fermentation start-up of the fermentation. The optimal HRT and incubation temperature for the first stage were determined to four days and 55°C. The performance of the two-stage AD concerning the stability of the process was followed by the co-digestion of OMSW with chicken manure as a nitrogen-rich co-substrate, which makes them viable options for waste disposal with concomitant energy recovery.

  11. Gas and water flow in an excavation-induced fracture network around an underground drift: A case study for a radioactive waste repository in clay rock

    Science.gov (United States)

    de La Vaissière, Rémi; Armand, Gilles; Talandier, Jean

    2015-02-01

    The Excavation Damaged Zone (EDZ) surrounding a drift, and in particular its evolution, is being studied for the performance assessment of a radioactive waste underground repository. A specific experiment (called CDZ) was designed and implemented in the Meuse/Haute-Marne Underground Research Laboratory (URL) in France to investigate the EDZ. This experiment is dedicated to study the evolution of the EDZ hydrogeological properties (conductivity and specific storage) of the Callovo-Oxfordian claystone under mechanical compression and artificial hydration. Firstly, a loading cycle applied on a drift wall was performed to simulate the compression effect from bentonite swelling in a repository drift (bentonite is a clay material to be used to seal drifts and shafts for repository closure purpose). Gas tests (permeability tests with nitrogen and tracer tests with helium) were conducted during the first phase of the experiment. The results showed that the fracture network within the EDZ was initially interconnected and opened for gas flow (particularly along the drift) and then progressively closed with the increasing mechanical stress applied on the drift wall. Moreover, the evolution of the EDZ after unloading indicated a self-sealing process. Secondly, the remaining fracture network was resaturated to demonstrate the ability to self-seal of the COx claystone without mechanical loading by conducting from 11 to 15 repetitive hydraulic tests with monitoring of the hydraulic parameters. During this hydration process, the EDZ effective transmissivity dropped due to the swelling of the clay materials near the fracture network. The hydraulic conductivity evolution was relatively fast during the first few days. Low conductivities ranging at 10-10 m/s were observed after four months. Conversely, the specific storage showed an erratic evolution during the first phase of hydration (up to 60 days). Some uncertainty remains on this parameter due to volumetric strain during the

  12. Nuclear Waste Management under Approaching Disaster: A Comparison of Decommissioning Strategies for the German Repository Asse II.

    Science.gov (United States)

    Ilg, Patrick; Gabbert, Silke; Weikard, Hans-Peter

    2017-07-01

    This article compares different strategies for handling low- and medium-level nuclear waste buried in a retired potassium mine in Germany (Asse II) that faces significant risk of uncontrollable brine intrusion and, hence, long-term groundwater contamination. We survey the policy process that has resulted in the identification of three possible so-called decommissioning options: complete backfilling, relocation of the waste to deeper levels in the mine, and retrieval. The selection of a decommissioning strategy must compare expected investment costs with expected social damage costs (economic, environmental, and health damage costs) caused by flooding and subsequent groundwater contamination. We apply a cost minimization approach that accounts for the uncertainty regarding the stability of the rock formation and the risk of an uncontrollable brine intrusion. Since economic and health impacts stretch out into the far future, we examine the impact of different discounting methods and rates. Due to parameter uncertainty, we conduct a sensitivity analysis concerning key assumptions. We find that retrieval, the currently preferred option by policymakers, has the lowest expected social damage costs for low discount rates. However, this advantage is overcompensated by higher expected investment costs. Considering all costs, backfilling is the best option for all discounting scenarios considered. © 2016 Society for Risk Analysis.

  13. Evaluation of tuff as a medium for a nuclear waste repository: interim status report on the properties of tuff

    Energy Technology Data Exchange (ETDEWEB)

    Johnstone, J.K.; Wolfsberg, K. (eds.)

    1980-07-01

    This report is the second in a series of summary briefings to the National Academy of Science`s (NAS) Committee on Radioactive Waste Management dealing with feasibility of disposal of heat-producing radioactive waste in silicic tuff. The interim status of studies of tuff properties determined on samples obtained from Yucca Mountain and Rainier Mesa (G-tunnel) located on the Nevada Test Site (NTS) are discussed. In particular, progress is described on resolving issues identified during the first briefing to the NAS which include behavior of water in tuff when heated, the effect of the presence or absence of water and joints on the thermal/physical properties of tuff and the detailed/complex sorptive properties of highly altered and unaltered tuff. Initial correlations of thermal/physical and sorptive properties with the highly variable porosity and mineralogy are described. Three in-situ, at-depth field experiments, one nearly completed and two just getting underway are described. In particular, the current status of mineralogy and petrology, geochemistry, thermal and mechanical, radiation effects and water behavior studies are described. The goals and initial results of a Mine Design Working Group are discussed. Regional factors such as seismicity, volcanism and hydrology are not discussed.

  14. Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project. [Assessment of post-closure performance for a proposed repository for high-level nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Roberds, W.J.; Plum, R.J.; Visca, P.J.

    1984-11-01

    This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab.

  15. A multiattribute utility analysis of sites nominated for characterization for the first radioactive-waste repository: A decision-aiding methodology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization, three simple quantitative methods were used to aggregate the rankings assigned to each site for the various technical guidelines. In response to numerous comments on the methods, the DOE has undertaken a formal application of one of them (hereafter referred to as the decision-aiding methodology) for the purpose of obtaining a more rigorous evaluation of the nominated sites. The application of the revised methodology is described in this report. The method of analysis is known as multiattribute utility analysis; it is a tool for providing insights as to which sites are preferable and why. The decision-aiding methodology accounts for all the fundamental considerations specified by the siting guidelines and uses as source information the data and evaluations reported or referenced in the EAs. It explicitly addresses the uncertainties and value judgments that are part of all siting problems. Furthermore, all scientific and value judgments are made explicit for the reviewer. An independent review of the application of the decision-aiding methodology has been conducted by the Board on Radioactive Waste Management of the National Academy of Sciences; the comments of the Board are included as an appendix to this report.

  16. Progress in evaluation of radionuclide geochemical information developed by DOE high-level nuclear waste repository site projects: Report for April 1986-September 1987

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, R.E.; Arnold, W.D.; Blencoe, J.G.; O`Kelley, G.D.; Land, J.F.

    1988-02-01

    Experiments were conducted with tuff from the proposed high-level nuclear waste site at Yucca Mountain, Nevada. Batch sorption ratio determinations were conducted for strontium, cesium, uranium, and technetium onto samples of tuff using real and synthetic groundwater J-13. There were no significant differences in sorption ratios in experiments with real and synthetic groundwater. Columns 1 cm in diameter and about 5 cm long were constructed, and experiments were conducted with the objective of correlating the results of batch and the column experiments. The characteristics of the columns were tested by determination of elution curves in J-13 containing tritium and technetium as the TcO{sub 4}{sup -} ion. For strontium and cesium, fairly good correlation between values of the sorption ratio obtained by the two methods was observed. Little or no technetium sorption was observed with either method. The elution peaks obtained with neptunium and uranium were asymmetrical and the shapes were often complex, observations which suggest irreversibilities in the sorption reaction. An experiment was performed to provide information on the compositions of the first groundwaters that will contact waste canisters in a tuff-hosted repository after very near field temperatures have cooled to below 100{degree}C. Synthetic groundwater J-13 was slowly dripped onto a slab of tuff maintained at 95-100{degree}C, and the result was a thin encrustation of solids on the slab as the water evaporated. Fresh J-13 groundwater was then allowed to contact the encrustation in a vessel maintained at 90{degree}C. The principal result of the experiment was a significant loss of calcium and magnesium from the fresh J-13 groundwater.

  17. Natural Analogues - One Way to Help Build Public Confidence in the Predicted Performance of a Mined Geologic Repository for Nuclear Waste

    Energy Technology Data Exchange (ETDEWEB)

    Stuckless, J. S.

    2002-02-26

    The general public needs to have a way to judge the predicted long-term performance of the potential high-level nuclear waste repository at Yucca Mountain. The applicability and reliability of mathematical models used to make this prediction are neither easily understood nor accepted by the public. Natural analogues can provide the average person with a tool to assess the predicted performance and other scientific conclusions. For example, hydrologists with the Yucca Mountain Project have predicted that most of the water moving through the unsaturated zone at Yucca Mountain, Nevada will move through the host rock and around tunnels. Thus, seepage into tunnels is predicted to be a small percentage of available infiltration. This hypothesis can be tested experimentally and with some quantitative analogues. It can also be tested qualitatively using a variety of analogues such as (1) well-preserved Paleolithic to Neolithic paintings in caves and rock shelters, (2) biological remains preserved in caves and rock shelters, and (3) artifacts and paintings preserved in man-made underground openings. These examples can be found in materials that are generally available to the non-scientific public and can demonstrate the surprising degree of preservation of fragile and easily destroyed materials for very long periods of time within the unsaturated zone.

  18. A Multi-Parametric Device with Innovative Solid Electrodes for Long-Term Monitoring of pH, Redox-Potential and Conductivity in a Nuclear Waste Repository.

    Science.gov (United States)

    Daoudi, Jordan; Betelu, Stephanie; Tzedakis, Theodore; Bertrand, Johan; Ignatiadis, Ioannis

    2017-06-13

    We present an innovative electrochemical probe for the monitoring of pH, redox potential and conductivity in near-field rocks of deep geological radioactive waste repositories. The probe is composed of a monocrystalline antimony electrode for pH sensing, four AgCl/Ag-based reference or Cl - selective electrodes, one Ag₂S/Ag-based reference or S 2- selective electrode, as well as four platinum electrodes, a gold electrode and a glassy-carbon electrode for redox potential measurements. Galvanostatic electrochemistry impedance spectroscopy using AgCl/Ag-based and platinum electrodes measure conductivity. The use of such a multi-parameter probe provides redundant information, based as it is on the simultaneous behaviour under identical conditions of different electrodes of the same material, as well as on that of electrodes made of different materials. This identifies the changes in physical and chemical parameters in a solution, as well as the redox reactions controlling the measured potential, both in the solution and/or at the electrode/solution interface. Understanding the electrochemical behaviour of selected materials thus is a key point of our research, as provides the basis for constructing the abacuses needed for developing robust and reliable field sensors.

  19. Safety-relevant hydrogeological properties of the claystone barrier of a Swiss radioactive waste repository: An evaluation using multiple lines of evidence

    Science.gov (United States)

    Gautschi, Andreas

    2017-09-01

    In Switzerland, the Opalinus Clay - a Jurassic (Aalenian) claystone formation - has been proposed as the first-priority host rock for a deep geological repository for both low- and intermediate-level and high-level radioactive wastes. An extensive site and host rock investigation programme has been carried out during the past 30 years in Northern Switzerland, comprising extensive 2D and 3D seismic surveys, a series of deep boreholes within and around potential geological siting regions, experiments in the international Mont Terri Rock Laboratory, compilations of data from Opalinus Clay in railway and motorway tunnels and comparisons with similar rocks. The hydrogeological properties of the Opalinus Clay that are relevant from the viewpoint of long-term safety are described and illustrated. The main conclusions are supported by multiple lines of evidence, demonstrating consistency of conclusions based on hydraulic properties, porewater chemistry, distribution of natural tracers across the Opalinus Clay as well as small- and large-scale diffusion models and the derived conceptual understanding of solute transport.

  20. Assessing social and economic effects of perceived risk: Workshop summary: Draft: BWIP Repository Project. [Basalt Waste Isolation Program

    Energy Technology Data Exchange (ETDEWEB)

    Nealey, S.M.; Liebow, E.B. (eds.)

    1988-03-01

    The US Department of Energy sponsored a one-day workshop to discuss the complex dimensions of risk judgment formation and the assessment of social and economic effects of risk perceptions related to the permanent underground storage of highly radioactive waste from commercial nuclear power plants. Affected parties have publicly expressed concerns about potentially significant risk-related effects of this approach to waste management. A selective review of relevant literature in psychology, decision analysis, economics, sociology, and anthropology was completed, along with an examination of decision analysis techniques that might assist in developing suitable responses to public risk-related concerns. The workshop was organized as a forum in which a set of distinguished experts could exchange ideas and observations about the problems of characterizing the effects of risk judgments. Out of the exchange emerged the issues or themes of problems with probabilistic risk assessment techniques are evident; differences exist in the way experts and laypersons view risk, and this leads to higher levels of public concern than experts feel are justified; experts, risk managers, and decision-makers sometimes err in assessing risk and in dealing with the public; credibility and trust are important contributing factors in the formation of risk judgments; social and economic consequences of perceived risk should be properly anticipated; improvements can be made in informing the public about risk; the role of the public in risk assessment, risk management and decisions about risk should be reconsidered; and mitigation and compensation are central to resolving conflicts arising from divergent risk judgments. 1 tab.

  1. Enhancing the hydrolysis process of a two-stage biogas technology for the organic fraction of municipal solid waste

    DEFF Research Database (Denmark)

    Nasir, Zeeshan; Uellendahl, Hinrich

    2015-01-01

    The Danish company Solum A/S has developed a two-stage dry anaerobic digestion process labelled AIKAN® for the biological conversion of the organic fraction of municipal solid waste (OFMSW) into biogas and compost. In the AIKAN® process design the methanogenic (2nd) stage is separated from...... the hydrolytic (1st) stage, which enables pump-free feeding of the waste into the 1st stage (processing module), and eliminates the risk for blocking of pumps and pipes by pumping only the percolate from the 1st stage into the 2nd stage (biogas reactor tank). The biogas yield of the AIKAN® two-stage process...... time, recirculation rate of percolate, ratio of admixing effluent from the anaerobic stage to the percolate, water submerge of waste) on the efficiency of the hydrolytic stage. •The effect of addition of adapted mixed cultures and specific hydrolytic microorganisms on the hydrolysis of the waste. •The...

  2. Site selection process for radioactive waste repository (radioactive facility) in Cuba as a fundamental safety criteria; Proceso de seleccion de emplazamiento como criterio fundamental de la seguridad para el repositorio de desechos radiactivos (instalacion radiactiva) en Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Vital, Jose Luis Peralta; Castillo, Reinaldo Gil; Chales Suarez, Gustavo; Rodriguez Reyes, Aymee [Centro de Tecnologia Nuclear, La Habana (Cuba)

    1999-11-01

    The paper show the process of search carried out for the selection of the safest site in the National territory, in order to sitting the Facility (Repository) that will disposal the low and intermediate level radioactive wastes, as well as the possible Storage Facility for nuclear spent Fuel (radioactive wastes of high activity). We summarize the obtained Methodology and the Criterions of exclusion adopted for the development of the Process of site selection, as well as the current condition of the researches that will permit the obtaining of the nominative objectives. (author) 18 refs., 1 fig., 1 tab.

  3. Can Indigenous and Introduced Bacteria Affect the Performance of an Engineered Barrier System in the Designated Yucca Mountain Nuclear Waste Repository?

    Science.gov (United States)

    Martin, S.; Dias, V.; Carrillo, C.; van Buuren, N.; Horn, J.

    2002-12-01

    The U.S. Department of Energy has been tasked with establishing a high level nuclear waste repository at Yucca Mountain, NV and assessing the effects of long-term storage of the waste. Studies are being performed to identify the role of microorganisms, both indigenous and introduced during the construction phase, to waste package material corrosion. Some microorganisms produce by-products that may be deleterious to waste package materials, such as bacteria that produce hydrogen and mineral acids, or reduce sulfate, and fungi that produce organic acids. Long-term and accelerated tests in continuous flow reactors were conducted to assess the biogenic effects on waste package materials, and batch tests were implemented to identify corrosion products and biochemical changes to ground water chemistry. Surfacial and gravimetric analyses of the metal samples coupled with water chemistry analysis allow us to determine the overall contribution that organisms may make to waste package corrosion. Metal samples were periodically removed from the reactors and examined with scanning electron and atomic force microscopy. Effluent samples were also collected and analyzed using inductively coupled plasma spectroscopy-mass spectrometry and ion chromatography. Sterile controls were run in parallel to understand abiotic contributions to metals corrosion. In addition, we have characterized the microbial community at Yucca Mountain in order to define the physiological potential of the organisms extant at the site and evaluate the conditions required for growth (we have determined that water availability will be the major limiting factor). Analysis of the fluids from batch tests containing the Alloy 22 (Ni-Cr-Mo alloy) metal suggest the solubilization of Mo, albeit in very low concentrations. Because we did not observe the solubilization of other metal components, it is unclear whether selective solubilization or dealloying is occurring. Endpoint analysis of precipitated particles in the

  4. Wellbore enlargement investigation: Potential analogs to the Waste Isolation Pilot Plant during inadvertent intrusion of the repository

    Energy Technology Data Exchange (ETDEWEB)

    Boak, D.M.; Dotson, L.; Aguilar, R. [and others

    1997-01-01

    This study involved the evaluation and documentation of cases in which petroleum wellbores were enlarged beyond the nominal hole diameter as a consequence of erosion during exploratory drilling, particularly as a function of gas flow into the wellbore during blowout conditions. A primary objective was to identify analogs to potential wellbore enlargement at the Waste Isolation Pilot Plant (WIPP) during inadvertent human intrusion. Secondary objectives were to identify drilling scenarios associated with enlargement, determine the physical extent of enlargement, and establish the physical properties of the formation in which the enlargement occurred. No analogs of sufficient quality to establish quantitative limits on wellbore enlargement at the WIPP disposal system were identified. However, some information was obtained regarding the frequency of petroleum well blowouts and the likelihood that such blowouts would bridge downhole, self-limiting the surface release of disposal-system material. Further work would be necessary, however, to determine the conditions under which bridging could occur and the extent to which the bridging might be applicable to WIPP. In addition, data on casing sizes of petroleum boreholes in the WIPP vicinity support the use of a 12-{1/4} inch borehole size in WIPP performance assessment calculations. Finally, although data are limited, there was no evidence of significant wellbore enlargement in any of three blowouts that occur-red in wellbores in the Delaware Basin (South Culebra Bluff Unit No. 1, Energy Research and Development Administration (ERDA) 6, and WIPP 12).

  5. Prediction of corrosion depth of selected materials for the container of high-level wastes under a repository condition

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Soo; Chun, Kwan Sik; Kang, Chul Hyung; Choi, Jong Won; Han, Kyung Won [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-05-01

    The corrosion depth of selected materials for container of high-level wastes in an underground disposal condition was predicted by analyzing the corrosion behaviors and corrosion rates of copper/copper alloys, carbon steel, titanium/titanium alloys, stainless steel and nickel alloys. Their corrosion rates depend on the amount of oxygen and microbes in bentonite at the bore hole, and local corrosion in addition to general corrosion. However, the effect of radiation and the oxygen dissolved in groundwater would be insignificant. To calculate the corrosion depth, it is assumed that the total amount of oxygen contained in the pore and surface of a bentonite block, and in the gaps among container, rock and bentonite block at a borehole is 300 moles. Assuming that all organic compounds in a bentonite block are presumed as lactate, they would produce 2,100 moles of HS-. The corrosion depths were calculated based on the above assumptions and the wall thickness of copper, carbon steel, titanium, stainless steel and nickel alloys of at least 2.6, 25, 1.3, 5 and 0.3 mm would be required for their corrosion allowances that guarantee their desired service life of 1,000 years. 94 refs., 13 figs., 6 tabs. (Author)

  6. Permeability and hydraulic diffusivity of Waste Isolation Pilot Plant repository salt inferred from small-scale brine inflow experiments

    Energy Technology Data Exchange (ETDEWEB)

    McTigue, D.F.

    1993-06-01

    Brine seepage to 17 boreholes in salt at the Waste Isolation Pilot Plant (WIPP) facility horizon has been monitored for several years. A simple model for one-dimensional, radial, darcy flow due to relaxation of ambient pore-water pressure is applied to analyze the field data. Fits of the model response to the data yield estimates of two parameters that characterize the magnitude of the flow and the time scale over which it evolves. With further assumptions, these parameters are related to the permeability and the hydraulic diffusivity of the salt. For those data that are consistent with the model prediction, estimated permeabilities are typically 10{sup {minus}22} to 10{sup {minus}21} m{sup 2}. The relatively small range of inferred permeabilities reflects the observation that the measured seepage fluxes are fairly consistent from hole to hole, of the order of 10{sup {minus}10} m/s. Estimated diffusivities are typically 10{sup {minus}10} to 10{sup {minus}8} m{sup 2}/s. The greater scatter in inferred hydraulic diffusivities is due to the difficulty of matching the idealized model history to the observed evolution of the flows. The data obtained from several of the monitored holes are not consistent with the simple model adopted here; material properties could not be inferred in these cases.

  7. Fabrication development for high-level nuclear waste containers for the tuff repository; Phase 1 final report

    Energy Technology Data Exchange (ETDEWEB)

    Domian, H.A.; Holbrook, R.L.; LaCount, D.F. [Babcock and Wilcox Co., Lynchburg, VA (USA). Nuclear Power Div.]|[Babcock and Wilcox Co., Alliance, OH (USA). Research and Development Div.

    1990-09-01

    This final report completes Phase 1 of an engineering study of potential manufacturing processes for the fabrication of containers for the long-term storage of nuclear waste. An extensive literature and industry review was conducted to identify and characterize various processes. A technical specification was prepared using the American Society of Mechanical Engineers Boiler & Pressure Vessel Code (ASME BPVC) to develop the requirements. A complex weighting and evaluation system was devised as a preliminary method to assess the processes. The system takes into account the likelihood and severity of each possible failure mechanism in service and the effects of various processes on the microstructural features. It is concluded that an integral, seamless lower unit of the container made by back extrusion has potential performance advantages but is also very high in cost. A welded construction offers lower cost and may be adequate for the application. Recommendations are made for the processes to be further evaluated in the next phase when mock-up trials will be conducted to address key concerns with various processes and materials before selecting a primary manufacturing process. 43 refs., 26 figs., 34 tabs.

  8. EEI/UWASTE oversight of the DOE Repository Program by the Repository Information Exchange Team

    Energy Technology Data Exchange (ETDEWEB)

    Henkel, C.J. [Edison Electric Institute, Washington, DC (United States); Supko, E.M.; Schwartz, M.H. [Energy Resources International Inc., Washington, DC (United States)

    1993-12-31

    The Utility Nuclear Waste and Transportation Program of the Edison Electric Institute (EEI/UWASTE) has conducted reviews of the US DOE`s repository program through its Repository Information Exchange Team (RIET or Team). Eight such reviews have been conducted since 1985 covering topics that include repository program management and control; repository schedule; repository budget; quality assurance; site characterization; repository licensing; environmental issues; and institutional and public information activities. The utility industry has used these repository program reviews as a forum for providing DOE`s Office of Civilian Radioactive Waste Management (OCRWM) with comments on the direction of the repository program, advice for future actions regarding quality assurance activities and repository licensing, and suggestions for management and control of the Repository Program. The most significant recommendations made by the utility industry through the RIET are discussed along with any subsequent action by OCRWM in response to or subsequent to utility industry recommendations. The process used by the RIET to develop its recommendations to OCRWM regarding the repository program is also discussed.

  9. Development of a novel three-stage fermentation system converting food waste to hydrogen and methane.

    Science.gov (United States)

    Kim, Dong-Hoon; Kim, Mi-Sun

    2013-01-01

    In this study, a novel three-stage (lactate-+photo-H(2)+CH(4)) fermentation system was developed, which converts food waste to H(2) and CH(4), with an emphasis on achieving high H(2) yield. The system begins by first fermenting food waste to lactate, rather than acetate and butyrate, using indigenous lactic acid bacteria. Lactate fermentation effluent was then centrifuged, and the supernatant was used for H(2) production by photo-fermentation, while the residue was used for CH(4) production by anaerobic digestion. Overall, via the three-stage fermentation system, 41% and 37% of the energy content in the food waste was converted to H(2) and CH(4), respectively, corresponding to the electrical energy yield of 1146 MJ/ton-food waste, which is 1.4 times higher value than that of previous two-stage dark (H(2)+CH(4)) fermentation system. The H(2) yield based on hexose input was 8.35 mol H(2)/mol hexose(added), the highest value ever reported from actual organic waste. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Two-stage agglomeration of fine-grained herbal nettle waste

    Science.gov (United States)

    Obidziński, Sławomir; Joka, Magdalena; Fijoł, Olga

    2017-10-01

    This paper compares the densification work necessary for the pressure agglomeration of fine-grained dusty nettle waste, with the densification work involved in two-stage agglomeration of the same material. In the first stage, the material was pre-densified through coating with a binder material in the form of a 5% potato starch solution, and then subjected to pressure agglomeration. A number of tests were conducted to determine the effect of the moisture content in the nettle waste (15, 18 and 21%), as well as the process temperature (50, 70, 90°C) on the values of densification work and the density of the obtained pellets. For pre-densified pellets from a mixture of nettle waste and a starch solution, the conducted tests determined the effect of pellet particle size (1, 2, and 3 mm) and the process temperature (50, 70, 90°C) on the same values. On the basis of the tests, we concluded that the introduction of a binder material and the use of two-stage agglomeration in nettle waste densification resulted in increased densification work (as compared to the densification of nettle waste alone) and increased pellet density.

  11. Reference repository design concept for bedded salt

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, D.W.; Martin, R.W.

    1980-10-08

    A reference design concept is presented for the subsurface portions of a nuclear waste repository in bedded salt. General geologic, geotechnical, hydrologic and geochemical data as well as descriptions of the physical systems are provided for use on generic analyses of the pre- and post-sealing performance of repositories in this geologic medium. The geology of bedded salt deposits and the regional and repository horizon stratigraphy are discussed. Structural features of salt beds including discontinuities and dissolution features are presented and their effect on repository performance is discussed. Seismic hazards and the potential effects of earthquakes on underground repositories are presented. The effect on structural stability and worker safety during construction from hydrocarbon and inorganic gases is described. Geohydrologic considerations including regional hydrology, repository scale hydrology and several hydrological failure modes are presented in detail as well as the hydrological considerations that effect repository design. Operational phase performance is discussed with respect to operations, ventilation system, shaft conveyances, waste handling and retrieval systems and receival rates of nuclear waste. Performance analysis of the post sealing period of a nuclear repository is discussed, and parameters to be used in such an analysis are presented along with regulatory constraints. Some judgements are made regarding hydrologic failure scenarios. Finally, the design and licensing process, consistent with the current licensing procedure is described in a format that can be easily understood.

  12. Enhanced degradation of waste grass clippings in one and two stage anaerobic systems.

    Science.gov (United States)

    Nair, S; Kuang, Y; Pullammanappallil, P

    2005-09-01

    The present work investigated the use of a simple rumen-fluid-inoculated anaerobic treatment system for the degradation of organic waste. Fresh rumen fluid collected from a fistulated sheep was used as the inoculum and fresh grass clippings were used as the waste material for treatment. Studies were carried out on both a one-stage system where the ligno-cellulosic fraction breaks down into a mixture of soluble products including volatile fatty acids and a two- stage system where these products are subsequently mineralised to biogas. In the one stage system about 70% of the organic waste was solubilized and in the two stage system about 60% waste material was solubilized in a week. About 50% of the degradation was achieved in a 4 day period, showing that a 4 day solids retention time would be a suitable operating regime. The maximum volatile fatty acid production rate was 327 mg COD l(-1) h(-1). A higher loading rate of 30 g l(-1) d(-1) was achieved in these systems compared to anaerobic digesters. Microbiological studies showed an increase in the number of fungal spores as well as a decrease in the number of protozoa in the treatment system. These numbers attained stable values over the duration of the experiments. The system developed is superior to conventional composting or anaerobic digestion and can be applied for the treatment of ligno-cellulosic agricultural residues.

  13. Shaft barriers for underground waste repositories in abandoned salt mines. Preparatory project. Vol. 2. Annex; Schachtverschluesse fuer untertaegige Deponien in Salzbergwerken. Vorprojekt. Bd. 2. Anhang

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, M.W. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Fruth, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Stockmann, N. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Birthler, H. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Boese, B. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Storck, R. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Sitz, P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Krausse, A. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Eulenberger, K.H. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Schleinig, J.P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Duddeck, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Ahrens, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Menzel, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Salzer, K. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Minkley, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Busche, H. [Kali und Salz AG, Kassel (Germany); Lindloff, U. [Kali und Salz AG, Kassel (Germany); Gierenz, S. [Kali und Salz AG, Kassel (Germany)

    1995-12-31

    This preparatory study, ``Shaft barriers for underground waste repositories in abandoned salt mines``, was to demonstrate the current scientific and technological know-how based on a comprehensive analysis of the barrier design concepts or established structures intended to serve as barriers in abandoned shafts of potash or rock salt mines. Taking as a basis the current regulatory regime and the available know-how on barrier systems in underground waste repositories taken into account so far in plan approval and licensing procedures, as well as the state of the art, concepts are developed as technical guides and models of barrier systems for mine shafts. The required research work for the various components of a shaft barrier is shown, particularly relating to aspects such as materials suitability and technical realisation. Immediate demand for research activities is shown with regard to the available potentials of mathematic and numeric geotechnical and hydrogeologic calculation models required in order to give proof of the long-term workability of shaft barriers. The authors are of the opinion that the following activities are required in order to meet the research demand quantified: (1) Laboratory and bench-scale experiments for determination of the efficiency of various sealing materials and backfilling materials, and (2) an in-situ, large-scale experiment in order to demonstrate the suitability of low-consolidation shotter columns, or constructional technologies. The laboratory work can be done in the facilities of the GSF research mine of Asse, the Freiburg Mining Academy, and the Institut fuer Gebirgsmechanik in Leipzig, and the benchmark experiments also at the Asse site in the research mine. The Kali und Salz Beteiligungs AG is prepared to offer its mine Salzdetfurth II as a site for the large-scale experiment. (orig.) [Deutsch] Im Rahmen der Vorstudie ``Schachtverschluesse fuer Untertagedeponien in Salzbergwerken`` wird ausgehend von einer umfangreichen

  14. Emission factors from different burning stages of agriculture wastes in Mexico.

    Science.gov (United States)

    Santiago-De la Rosa, Naxieli; Mugica-Álvarez, Violeta; Cereceda-Balic, Francisco; Guerrero, Fabián; Yáñez, Karen; Lapuerta, Magin

    2017-11-01

    Open-air burning of agricultural wastes from crops like corn, rice, sorghum, sugar cane, and wheat is common practice in Mexico, which in spite limiting regulations, is the method to eliminate such wastes, to clear the land for further harvesting, to control grasses, weeds, insects, and pests, and to facilitate nutrient absorption. However, this practice generates air pollution and contributes to the greenhouse effect. Burning of straws derived from the said crops was emulated in a controlled combustion chamber, hence determining emission factors for particles, black carbon, carbon dioxide, carbon monoxide, and nitric oxide throughout the process, which comprised three apparent stages: pre-ignition, flaming, and smoldering. In all cases, maximum particle concentrations were observed during the flaming stage, although the maximum final contributions to the particle emission factors corresponded to the smoldering stage. The comparison between particle size distributions (from laser spectrometer) and black carbon (from an aethalometer) confirmed that finest particles were emitted mainly during the flaming stage. Carbon dioxide emissions were also highest during the flaming stage whereas those of carbon monoxide were highest during the smoldering stage. Comparing the emission factors for each straw type with their chemical analyses (elemental, proximate, and biochemical), some correlations were found between lignin content and particle emissions and either particle emissions or duration of the pre-ignition stage. High ash or lignin containing-straw slowed down the pre-ignition and flaming stages, thus favoring CO oxidation to CO2.

  15. Assessment of increasing loading rate on two-stage digestion of food waste.

    Science.gov (United States)

    Voelklein, M A; Jacob, A; O' Shea, R; Murphy, J D

    2016-02-01

    A two-stage food waste digestion system involved a first stage hydrolysis reactor followed by a second stage methanogenic reactor. Organic loading rates (OLR) were increased from 6 to 15 g VS L(-1) d(-1) in the hydrolysis reactor and from 2 to 5 g VS L(-1) d(-1) in the methanogenic reactor. The retention time was fixed at 4 days (hydrolysis reactor) and 12 days (methane reactor). A single-stage digester was subjected to similar loading rates as the methanogenic reactor at 16 days retention. Increased OLR resulted in higher quantities of liquid fermentation products from the first stage hydrolysis reactor. Solubilisation of chemical oxygen demand peaked at 47% at the maximum loading. However, enhanced hydrolysis yields had no significant impact on the specific methane yields. The two-stage system increased methane yields up to 23% and enriched methane content by an average of 14% to levels of 71%. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Radiation-Induced Defects in Kaolinite as Tracers of Past Occurrence of Radionuclides in a Natural Analogue of High Level Nuclear Waste Repository

    Science.gov (United States)

    Allard, T.; Fourdrin, C.; Calas, G.

    2007-05-01

    Understanding the processes controlling migrations of radioelements at the Earth's surface is an important issue for the long-term safety assessment of high level nuclear waste repositories (HLNWR). Evidence of past occurrence and transfer of radionuclides can be found using radiation-induced defects in minerals. Clay minerals are particularly relevant because of their widespread occurrence at the Earth's surface and their finely divided nature which provides high contact area with radioactive fluids. Owing to its sensitivity to radiations, kaolinite can be used as natural, in situ dosimeter. Kaolinite is known to contain radiation-induced defects which are detected by Electron Paramagnetic Resonance. They are differentiated by their nature, their production kinetics and their thermal stability. One of these defects is stable at the scale of geological periods and provides a record of past radionuclide occurrence. Based on artificial irradiations, a methodology has been subsequently proposed to determine paleodose cumulated by kaolinite since its formation. The paleodose can be used to derive equivalent radioelement concentrations, provided that the age of kaolinite formation can be constrained. This allows quantitative reconstruction of past transfers of radioelements in natural systems. An example is given for the Nopal I U-deposit (Chihuahua, Mexico), hosted in hydrothermally altered volcanic tufs and considered as analogue of the Yucca Mountain site. The paleodoses experienced by kaolinites were determined from the concentration of defects and dosimetry parameters of experimental irradiations. Using few geochemical assumption, a equivalent U-content responsible for defects in kaolinite was calculated from the paleodose, a dose rate balance and model ages of kaolinites constrained by tectonic phases. In a former study, the ages were assumptions derived from regional tectonic events. In thepresent study, ages of mineralization events are measured from U

  17. Analysis of interactions of mechanical deformations and mass transfer on heat transfer from an underground nuclear-waste repository. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, S.G.; Hulbert, L.E.

    1979-10-01

    A review of existing models identified several effects that may need consideration in further model development. Most of these effects involved coupling equations through variable property values rather than through omission of any significant mechanism. However, it was also shown that more than one mechanism may adequately simulate a given set of experimental data and additional experimental data are needed to establish which (if any) of the possible mechanisms would actually control conditions in a nuclear waste repository. In particular, it is believed that mathematical modeling of major thermomechanical effects can be accomplished with finite element analysis computer programs, provided that adequate thermomechanical property data of salt and overburden are attained. An attempt was made to develop a general set of differential equations for simulating momentum, mass, and energy flows in geologic formations in order to illustrate the possible mechanisms and point out those included and not included in existing models. Most of the mechanisms are included in some manner in existing models although some approximations may not be adequate. More experimental data are required to assess the importance of most omitted mechanisms. Analysis of some data on brine migration in salt indicated that two mechanisms, acting simultaneously, could adequately explain the flow. These are Darcy flow and a combination of ordinary and thermal diffusion enhanced by temperature-dependent solubility. Equations based on this simultaneous action correlated the data very well and indicated the possible need to include both (and, maybe other) mechanisms in future models. A program is recommended for further study of brine mobility. An expected result of this program includes recommendations for further experimental work.

  18. Characterisation and modelling of mixing processes in groundwaters of a potential geological repository for nuclear wastes in crystalline rocks of Sweden.

    Science.gov (United States)

    Gómez, Javier B; Gimeno, María J; Auqué, Luis F; Acero, Patricia

    2014-01-15

    This paper presents the mixing modelling results for the hydrogeochemical characterisation of groundwaters in the Laxemar area (Sweden). This area is one of the two sites that have been investigated, under the financial patronage of the Swedish Nuclear Waste and Management Co. (SKB), as possible candidates for hosting the proposed repository for the long-term storage of spent nuclear fuel. The classical geochemical modelling, interpreted in the light of the palaeohydrogeological history of the system, has shown that the driving process in the geochemical evolution of this groundwater system is the mixing between four end-member waters: a deep and old saline water, a glacial meltwater, an old marine water, and a meteoric water. In this paper we put the focus on mixing and its effects on the final chemical composition of the groundwaters using a comprehensive methodology that combines principal component analysis with mass balance calculations. This methodology allows us to test several combinations of end member waters and several combinations of compositional variables in order to find optimal solutions in terms of mixing proportions. We have applied this methodology to a dataset of 287 groundwater samples from the Laxemar area collected and analysed by SKB. The best model found uses four conservative elements (Cl, Br, oxygen-18 and deuterium), and computes mixing proportions with respect to three end member waters (saline, glacial and meteoric). Once the first order effect of mixing has been taken into account, water-rock interaction can be used to explain the remaining variability. In this way, the chemistry of each water sample can be obtained by using the mixing proportions for the conservative elements, only affected by mixing, or combining the mixing proportions and the chemical reactions for the non-conservative elements in the system, establishing the basis for predictive calculations. © 2013 Elsevier B.V. All rights reserved.

  19. BMU support in the licensing procedure concerning the decommissioning of the repository for radioactive waste Morsleben (ERAM). Studies and results; Unterstuetzung des BMU im Planfeststellungsverfahren zur Stilllegung des Endlagers fuer radioaktive Abfaelle Morsleben (ERAM). Berichtsband

    Energy Technology Data Exchange (ETDEWEB)

    Baltes, B.; Larue, J.; Martens, K.H.; Oppermann, U.; Peiffer, F.; Roehlig, K.; Wernicke, R.

    2002-02-01

    To support the BMU in the licensing procedure concerning the decommissioning of the repository for radioactive waste Morsleben, GRS has derived requirements for the application and safety demonstration procedure as well as for the corresponding stages of work under nuclear as well as conventional engineering aspects. This report gives a survey of the current status of development of the definitive decommissioning concept, the requisite long-term safety case, and the planning status concerning the legal areas of conventional engineering touched by the plans put forward by the licensee. The comments on the characterisation under radiological and chemotoxic aspects of the materials emplaced and on the identification of the work necessary to establish the design conditions of the technical facilities until plan approval were updated in line with the development of the plans and the information provided. A comment was prepared on the latest technical plans concerning the premature backfilling of the central area of the Bartensleben mine. The reporting period covers the work carried out in the year 2001. (orig.) [German] Zur Unterstuetzung des BMU in Planfeststellungsverfahren zur Stilllegung des Endlagers fuer radioaktive Abfaelle Morsleben hat die GRS Anforderungen an das Antrags- und Nachweisverfahren abgeleitet sowie zum jeweiligen Stand der Arbeiten unter kerntechnischen und konventionellen technischen Aspekten. Mit diesen Darstellungen wird ein Ueberblick zum Stand der Entwicklung eines abschliessenden Stilllegungskonzeptes, zum erforderlichen Langzeitsicherheitsnachweis sowie zum Stand der Planungen zu den konventionellen technischen Rechtsgebieten, die durch die Planungen des Antragstellers tangiert werden, gegeben. Die Stellungnahmen zur Charakterisierung der eingebrachten Materialien unter radiologischen und chemotoxischen Gesichtspunkten und zur Identifizierung von erforderlichen Arbeiten zur Herstellung des anlagentechnischen Sollzustandes bis zur

  20. Numerical modeling of flow and transport in the far-field of a generic nuclear waste repository in fractured crystalline rock using updated fracture continuum model

    Science.gov (United States)

    Hadgu, T.; Kalinina, E.; Klise, K. A.; Wang, Y.

    2016-12-01

    Disposal of high-level radioactive waste in a deep geological repository in crystalline host rock is one of the potential options for long term isolation. Characterization of the natural barrier system is an important component of the disposal option. In this study we present numerical modeling of flow and transport in fractured crystalline rock using an updated fracture continuum model (FCM). The FCM is a stochastic method that maps the permeability of discrete fractures onto a regular grid. The original method by McKenna and Reeves (2005) has been updated to provide capabilities that enhance representation of fractured rock. As reported in Hadgu et al. (2015) the method was first modified to include fully three-dimensional representations of anisotropic permeability, multiple independent fracture sets, and arbitrary fracture dips and orientations, and spatial correlation. More recently the FCM has been extended to include three different methods. (1) The Sequential Gaussian Simulation (SGSIM) method uses spatial correlation to generate fractures and define their properties for FCM (2) The ELLIPSIM method randomly generates a specified number of ellipses with properties defined by probability distributions. Each ellipse represents a single fracture. (3) Direct conversion of discrete fracture network (DFN) output. Test simulations were conducted to simulate flow and transport using ELLIPSIM and direct conversion of DFN methods. The simulations used a 1 km x 1km x 1km model domain and a structured with grid block of size of 10 m x 10m x 10m, resulting in a total of 106 grid blocks. Distributions of fracture parameters were used to generate a selected number of realizations. For each realization, the different methods were applied to generate representative permeability fields. The PFLOTRAN (Hammond et al., 2014) code was used to simulate flow and transport in the domain. Simulation results and analysis are presented. The results indicate that the FCM approach is a

  1. Radioactive wastes repository in Temascalapa, State of Mexico, public opinion. Determination of health effects; Repositorio de residuos radiactivos en Temascalapa Estado de Mexico, Opinion publica. Determinacion de efectos en la salud

    Energy Technology Data Exchange (ETDEWEB)

    Solis Tinoco, E

    1998-12-31

    Nuclear waste usually concerns public about the impact on public health and the environment. In Mexico, such interest exists, particularly in the Temascalapa Municipality, Mexico where a low level waste repository recognized by the IAEA, has been functioning since 1972. Maquixco repository is located at 42 Kilometers northeast of Mexico City. Although the environmental radiological monitoring records have demonstrated negligible impact on the environment, in 1998 an unusual public polemic on radioactive health effects appeared among Temascalapa residents. This paper presents a research performed during 1998 with the participation of the National Nuclear Research Institute of Mexico and the National Autonomous University of Mexico. The research design allowed the involvement of local authorities, as a way of stimulate public participation. The research was performed in nine locations of the Temascalapa Municipality, it was focused on public polemics, associated to Maquixco repository as well as trying to identify demographic factors that exert influence on public attitudes. There are also presented the results of personal dosimetry analysis performed on a four hundred residents sample of this Municipality. (Author)

  2. Environmental Assessment for Hazardous Waste Staging Facility, Pantex Plant, Amarillo, Texas

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This Environmental Assessment (EA) has been prepared pursuant to the implementing regulations to the National Environmental Policy Act (NEPA), which require federal agencies to assess the environmental impacts of a proposed action to determine whether that action requires the preparation of an Environmental Impact Statement (EIS) or if a Finding of No Significant Impact (FONSI) can be issued. The Pantex Plant does not possess permanent containerized waste staging facilities with integral secondary containment or freeze protection. Additional deficiencies associated with some existing staging facilities include: no protection from precipitation running across the staging pads; lack of protection against weathering; and facility foundations not capable of containing leaks, spills or accumulated precipitation. These shortcomings have raised concerns with respect to requirements under Section 3001 of the Resource Conservation and Recovery Act (RCRA). Deficiencies for these waste staging areas were also cited by a government audit team (Tiger Team) as Action Items. The provision for the staging of hazardous, mixed, and low level waste is part of the no-action altemative in the Programmatic Environmental Impact Statement for the integrated ER/WM program. Construction of this proposed project will not prejudice whether or not this integration will occur, or how.

  3. Milestones for Selection, Characterization, and Analysis of the Performance of a Repository for Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain.

    Energy Technology Data Exchange (ETDEWEB)

    Rechard, Robert P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    This report presents a concise history in tabular form of events leading up to site identification in 1978, site selection in 1987, subsequent characterization, and ongoing analysis through 2009 of the performance of a repository for spent nuclear fuel and high - level radioactive waste at Yucca Mountain in southern Nevada. The tabulated events generally occurred in five periods: (1) commitment to mined geologic disposal and identification of sites; (2) site selection and analysis, based on regional geologic characterization through literature and analogous data; (3) feasibility analysis demonstrating calculation procedures and importance of system components, based on rough measures of performance using surface exploration, waste process knowledge, and general laboratory experiments; (4) suitability analysis demonstrating viability of disposal system, based on environment - specific laboratory experiments, in - situ experiments, and underground disposal system characterization; and (5) compliance analysis, based on completed site - specific characterization . The current sixth period beyond 2010 represents a new effort to set waste management policy in the United States. Because the relationship is important to understanding the evolution of the Yucca Mountain Project , the tabulation also shows the interaction between the policy realm and technical realm using four broad categories of events : (a) Regulatory requirements and related federal policy in laws and court decisions, (c) Presidential and agency directives, (c) technical milestones of implementing institutions, and (d) critiques of the Yucca Mountain Project and pertinent national and world events related to nuclear energy and radioactive waste. Preface The historical progression of technical milestones for the Yucca Mountain Project was originally developed for 10 journal articles in a special issue of Reliability Engineering System Safety on the performance assessment for the Yucca Mountain license

  4. Plan 2002. Costs for management of the radioactive waste from nuclear power production; Plan 2002. Kostnader foer kaernkraftens radioaktiva restprodukter

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-06-01

    The cost estimates are based on different scenarios and make allowances for uncertainties, variations and disturbances in the various projects. Costs for reactor decommissioning and for research and demonstration throughout the different stages of the waste handling and disposal are included. The total future cost for handling the waste from 25 years operation of the 12 Swedish reactors amounts to 48.6 billion SEK (in the reference scenario). 14.5 billion SEK has already been used for building and operating the existing plants (end 2001). The following systems are operational as of today: A transport system for radioactive waste; Central interim storage facility for spent fuels (CLAB); Final repository for low and intermediate level radioactive waste (SFR1). The following systems are planned: Encapsulation plant for spent fuels, Geologic repository for spent fuels, Repository for long-lived low and medium active wastes, repository for demolition wastes.

  5. Experimental methodology to study radionuclide sorption and migration in geological formations and engineered barriers of waste repositories; Metodologia experimental para estudios de sorcion y migracion de radionucleidos en formaciones geologicas y barreras de almacenamientos de residuos

    Energy Technology Data Exchange (ETDEWEB)

    Rojo Sanz, H.

    2010-07-01

    In Spain, the waste management options include either the possibility of a final storage in a deep geological repository (DGR) or the centralized temporal surface disposal (CTS). DGRs are based in a multi-barrier concept with the geological barrier and including the vitrified waste, the metal containers and engineered barriers such as compacted bentonite and cement-based materials. On the other hand, CTS mainly considers concrete and cement to confine the metal canisters containing the waste. Radionuclide migration will mainly take place by the existence of chemical concentration gradients being thus diffusion the main transport mechanism or by the existence of hydraulic gradients due to the existence of water-conductive fractures. Radionuclide sorption/retention on the materials composing the natural and engineered barriers is the fundamental process controlling contaminant migration. The evaluation of sorption parameters and the understanding of the different mechanisms leading to radionuclide retention are very important issues. The study of diffusion processes is very relevant as well. This paper describes the main experimental methodologies applied to analyse radionuclide transport in the different barriers of radioactive repositories. Particularly we focused on obtaining of retention parameters as distribution coefficients, kd, or retardation factors, Rf, and diffusion coefficients of radionuclides. (Author) 6 refs.

  6. Far Field Sorption Data Bases for Performance Assessment of a High-Level Radioactive Waste Repository in an Undisturbed Opalinus Clay Host Rock

    Energy Technology Data Exchange (ETDEWEB)

    Bradburry, M.; Baeyens, B

    2003-08-01

    An Opalinus Clay formation in the Zuercher Weinland is under consideration by Nagra as a potential location for a high-level and long-Iived intermediate-level radioactive waste repository. Performance assessment studies will be performed for this site and the purpose of this report is to describe the procedures used to develop sorption data bases appropriate for an undisturbed Opalinus Clay host rock which are required for such safety analysis calculations. In tight, low water content argillaceous rock formations such as Opalinus Clay, there is uncertainty concerning the in situ pH/P{sub CO{sub 2}}. In order to take this intrinsic uncertainty into account porewater chemistries were calculated for a reference case, pH = 7.24, and for two other pH values, 6.3 and 7.8. Sorption data bases are given for the three cases. The basis for the sorption data bases is 'in-house' sorption measurements for Cs(I), Sr(II), Ni(II), Eu(III), Sn(IV), Se(IV), Th(IV) and I(-I) carried out on Opalinus Clay samples from Mont Terri (Canton Jura) since at the time the experiments were performed no core samples from the Benken borehole (Zuercher Weinland) were available. The Opalinus Clay at Mont Terri and Benken are part of the same geological formation . Despite having directly measured data for the above key radionuclides, some of the required distribution ratios (Rd) used to generate the sorption data bases still came from the open literature. An important part of this report is concerned with describing the procedures whereby these selected literature Rd values were modified so as to apply to the Benken Opalinus Clay mineralogy and groundwater chemistries calculated at the three pH values given above. The resulting Rd values were then further modified using so-called Lab{yields}Field transfer factors to produce sorption values which were appropriate to the in situ bulk rock for the selected range of water chemistry conditions. Finally, it is important to have some

  7. Characterisation and modelling of mixing processes in groundwaters of a potential geological repository for nuclear wastes in crystalline rocks of Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Gómez, Javier B., E-mail: jgomez@unizar.es; Gimeno, María J., E-mail: mjgimeno@unizar.es; Auqué, Luis F., E-mail: lauque@unizar.es; Acero, Patricia, E-mail: patriace@unizar.es

    2014-01-01

    This paper presents the mixing modelling results for the hydrogeochemical characterisation of groundwaters in the Laxemar area (Sweden). This area is one of the two sites that have been investigated, under the financial patronage of the Swedish Nuclear Waste and Management Co. (SKB), as possible candidates for hosting the proposed repository for the long-term storage of spent nuclear fuel. The classical geochemical modelling, interpreted in the light of the palaeohydrogeological history of the system, has shown that the driving process in the geochemical evolution of this groundwater system is the mixing between four end-member waters: a deep and old saline water, a glacial meltwater, an old marine water, and a meteoric water. In this paper we put the focus on mixing and its effects on the final chemical composition of the groundwaters using a comprehensive methodology that combines principal component analysis with mass balance calculations. This methodology allows us to test several combinations of end member waters and several combinations of compositional variables in order to find optimal solutions in terms of mixing proportions. We have applied this methodology to a dataset of 287 groundwater samples from the Laxemar area collected and analysed by SKB. The best model found uses four conservative elements (Cl, Br, oxygen-18 and deuterium), and computes mixing proportions with respect to three end member waters (saline, glacial and meteoric). Once the first order effect of mixing has been taken into account, water–rock interaction can be used to explain the remaining variability. In this way, the chemistry of each water sample can be obtained by using the mixing proportions for the conservative elements, only affected by mixing, or combining the mixing proportions and the chemical reactions for the non-conservative elements in the system, establishing the basis for predictive calculations. - Highlights: • Laxemar (Sweden) groundwater is the combined result

  8. Alternatives generation and analysis for the Phase I intermediate waste feed staging system design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Claghorn, R.D., Fluor Daniel Hanford

    1997-02-06

    This alternatives generation and analysis (AGA) addresses the question: What is the design basis for the facilities required to stage low-level waste (LLW) feed to the Phase I private contractors? Alternative designs for the intermediate waste feed staging system were developed, analyzed, and compared. Based on these analyses, this document recommends installing mixer pumps in the central pump pit of double-shell tanks 241-AP-102 and 241-AP-104. Also recommended is installing decant/transfer pumps at these tanks. These recommendations have clear advantages in that they provide a low shedule impact/risk and the highest operability of all the alternatives investigated. This revision incorporates comments from the decision board.

  9. Public involvement in the siting of contentious facilities; Lessons from the radioactive waste repository siting programmes in Canada and the United States, with special reference to the Swedish repository siting process

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, P.J. [Geosciences for Development and the Environment (United Kingdom)

    1997-08-01

    This report describes the conclusion of a two-part programme, begun in 1994 with the overall aim of assisting in the development of an acceptable public participation strategy for use in Sweden for the siting of contentious facilities, with particular reference to the ongoing siting programme for a deep repository for spent nuclear fuel. The first part of the work programme, a global review of siting practice, was reported as SSI Rapport 94-15, in November 1994. This recommended further detailed studies of at least two individual programmes, which have now been carried out in Canada and the United States, and are reported on here. They involved face to face meetings with many of the main stake holders in the two programmes and enabled valuable insight to be gained into the potential problems associated with increased public participation, as well as identifying good practice where it exists. The lessons learned have then been applied to the evolving repository siting process in Sweden. 35 refs.

  10. Effects of earthworm casts and zeolite on the two-stage composting of green waste

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Lu, E-mail: zhanglu1211@gmail.com; Sun, Xiangyang, E-mail: xysunbjfu@gmail.com

    2015-05-15

    Highlights: • Earthworm casts (EWCs) and clinoptilolite (CL) were used in green waste composting. • Addition of EWCs + CL improved physico-chemical and microbiological properties. • Addition of EWCs + CL extended the duration of thermophilic periods during composting. • Addition of EWCs + CL enhanced humification, cellulose degradation, and nutrients. • Combined addition of 0.30% EWCs + 25% CL reduced composting time to 21 days. - Abstract: Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21 days with the optimized two-stage composting method rather than in the 90–270 days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL.

  11. Project Opalinus Clay: Radionuclide Concentration Limits in the Near-Field of a Repository for Spent Fuel and Vitrified High-Level Waste

    Energy Technology Data Exchange (ETDEWEB)

    Berner, U

    2002-10-01

    The disposal feasibility study currently performed by Nagra includes a succession of quantitative models, aiming at describing the fate of radionuclides potentially escaping from the repository system. In this chain of models the present report provides the so called 'solubility limits' (maximum expected concentrations) for safety relevant radionuclides from SF/HLW wastes, disposed of in a reducing clay (Opalinus Clay, bentonite) environment. Solubility and speciation calculations in bentonite pore waters were performed using the very recently updated Nagra/PSI Chemical Thermodynamic Data Base (TDB) for the majority of the 37 elements addressed as potentially relevant. Particularly for the most relevant actinides, the straightforward applications with this updated TDB yielded results in contradiction to chemical analogy considerations. This was a consequence of incomplete data and called for problem specific TDB extensions, which were evaluated in a separate study. However, a summary of these problem specific extensions is provided in section 4.1. The results presented in this report solely depend on geochemical model calculations. Thus, it is of utmost importance that the underlying data and assumptions are made clear to the reader. In order to ensure traceability, all thermodynamic data not included in the Nagra/PSI TDB are explicitly specified in the report, in order to provide complete documentation for quality assurance and for comprehensibility. In order to clearly distinguish between results derived from data carefully reviewed in the Nagra/PSI TDB and those calculated from 'other' data, the summary of expected maximum concentrations provided in Table 1 includes two columns. The heading CALCULATED provides maximum concentrations based on data fully documented in the updated TDB, whereas maximum concentrations, which include additional problem specific data and/or data from other sources, are given under the heading RECOMMENDED. The

  12. Near Field sorption Data Bases for Compacted MX-80 Bentonite for Performance Assessment of a High-Level Radioactive Waste Repository in Opalinus Clay Host Rock

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, M.; Baeyens, B

    2003-08-01

    Bentonites of various types and compacted forms are being investigated in many countries as backfill materials in high-level radioactive waste disposal concepts. Nagra is currently considering an Opalinus clay (OPA) formation in the Zuercher Weinland as a potential location for a high-level radioactive waste repository. A compacted MX-80 bentonite is foreseen as a potential backfill material. Performance assessment studies will be performed for this site and one of the requirements for such an assessment are sorption data bases (SDB) for the bentonite near-field. The purpose of this report is to describe the procedures used to develop the SDB. One of the pre-requisites for developing a SDB is a water chemistry for the compacted bentonite porewater. For a number of reasons mentioned in the report, and discussed in more detail elsewhere, this is not a straightforward task. There are considerable uncertainties associated with the major ion concentrations and in particular with the system pH and Eh. The MX-80 SDB was developed for a reference bentonite porewater (pH = 7.25) which was calculated using the reference OPA porewater. In addition, two further SDBs are presented for porewaters calculated at pH values of 6.9 and 7.9 corresponding to lower and upper bound values calculated for the range of groundwater compositions anticipated for the OPA host rock. 'In house' sorption isotherm data were measured for Cs(I), Ni(II), Eu(III), Th(IV), Se(IV) and 1(-1) on the 'as received' MX-80 material equilibrated with a simulated porewater composition. Complementary 'in house' sorption edge and isotherm measurements on conditioned Na/Ca montmorillonites were also available for many of these radionuclides. These data formed the core of the SDB. Nevertheless, some of the required sorption data still had to be obtained from the open literature. An important part of this report is concerned with describing selection procedures and the modifications

  13. Southern Nevada residents` views about the Yucca Mountain high-level nuclear waste repository and related issues: A comparative analysis of urban and rural survey data

    Energy Technology Data Exchange (ETDEWEB)

    Krannich, R.S.; Little, R.L. [Utah State Univ., Logan, UT (United States); Mushkatel, A.; Pijawka, K.D.; Jones, P. [Arizona State Univ., Tempe, AZ (United States)

    1991-10-01

    two separate surveys were undertaken in 1988 to ascertain southern Nevadans` views about the Yucca Mountain repository and related issues. The first of these studies focused on the attitudes and perceptions of residents in the Las Vegas metropolitan area. The second study addressed similar issues, but focused on the views of residents in six rural communities in three counties adjacent to the Yucca Mountain site. However, parallel findings from the two data sets have not been jointly analyzed in order to identify ways in which the views and orientations of residents in the rural and urban study areas may be similar or different. The purpose of this report is to develop and present a comparative assessment of selected issues addressed in the rural and urban surveys. Because both urban and rural populations would potentially be impacted by the Yucca Mountain repository, such an analysis will provide important insights into possible repository impacts on the well-being of residents throughout southern Nevada.

  14. Hydrogen and methane production from household solid waste in the two-stage fermentation process.

    Science.gov (United States)

    Liu, Dawei; Liu, Dapeng; Zeng, Raymond J; Angelidaki, Irini

    2006-06-01

    A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H(2)/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH(4)/g VS added. This figure was 21% higher than the methane yield from the one-stage process, which was run as control. Sparging of the hydrogen reactor with methane gas resulted in doubling of the hydrogen production. pH was observed as a key factor affecting fermentation pathway in hydrogen production stage. The optimum pH range for hydrogen production in this system was in the range from 5 to 5.5. The short hydraulic retention time (2 days) applied in the first stage was enough to separate acidogenesis from methanogenesis. No additional control for preventing methanogenesis in the first stage was necessary. Furthermore, this study also provided direct evidence in the dynamic fermentation process that, hydrogen production increase was reflected by acetate to butyrate ratio increase in liquid phase.

  15. Present status and an appreciation of the consequences for recreation and outdoor leisure activities from siting a nuclear waste repository at Forsmark; Nulaegesanalys samt bedoemning av konsekvenser foer rekreation och friluftsliv av ett slutfoervar i Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Ottosson, Pia [Atrax Energi AB, Stockholm (Sweden)

    2007-07-15

    This report describes how the area around Forsmark is used with respect to recreation and outdoor life. It also describes the impact of the final repository on recreation and outdoor life if it is located in Forsmark. The studied area is situated in the parish of Forsmark in the municipality of Oesthammar. Forsmark nuclear power plant and the final repository for radioactive operational waste, SFR, are situated within the area and there are both houses and holiday houses. The area is used for leisure pursuit by inhabitants and employees at FKA and SKB, but also by a number of different associations and by tourists. Statistical data shows that the parish of Forsmark is sparsely populated. The area was previously dominated by one big landowner and the land surrounding the nuclear power plant was inaccessible to the general public during that period. The outdoor life is therefore less widespread here than along other parts of the east coast. The value of the area does not lie in paths and trails, bike tracks and bathing places, but in the unspoiled countryside, the wildlife and the bird life. Recreation such as hunting and fishing is very popular in the area. The construction of a final repository will increase traffic and hence increase noise and motion in the area. This will mainly impact the enjoyment value for the people spending time in the area. No other significant consequences are expected as the final repository will be mainly situated within the existing industrial complex and hence the character of the area should remain unchanged.

  16. Collaborative repositories

    DEFF Research Database (Denmark)

    Pilegaard, Morten

    2009-01-01

    Textual and communicative competence lies at the heart of the skills of a professional linguistic mediator in general. Such skills are particularly important in specialized writing, which requires deep conceptual and contextual knowledge. One of the main objectives of the activities undertaken...... of such 'deep' knowledge within interdisciplinary and intersectoral 'knowledge clusters'. This paper presents concepts and systems for multilingual terminological and textual knowledge codification, representation, validation, management and sharing structured around the notion of genre following Bergenkotter...... & Huckin 1995; Bhatia 1997, 2004; Dudley-Evans 1997 and Swales 1990, 1994. These systems operationalize the different stages of the 'virtuous knowledge cycle' proposed by Nonaka and Takeuchi (1995) within a dynamic, multilingual specialized web-dictionary and a multilingual, genre-based corpus of medical...

  17. France’s State of the Art Distributed Optical Fibre Sensors Qualified for the Monitoring of the French Underground Repository for High Level and Intermediate Level Long Lived Radioactive Wastes

    Science.gov (United States)

    Delepine-Lesoille, Sylvie; Girard, Sylvain; Landolt, Marcel; Bertrand, Johan; Planes, Isabelle; Boukenter, Aziz; Marin, Emmanuel; Humbert, Georges; Leparmentier, Stéphanie; Auguste, Jean-Louis; Ouerdane, Youcef

    2017-01-01

    This paper presents the state of the art distributed sensing systems, based on optical fibres, developed and qualified for the French Cigéo project, the underground repository for high level and intermediate level long-lived radioactive wastes. Four main parameters, namely strain, temperature, radiation and hydrogen concentration are currently investigated by optical fibre sensors, as well as the tolerances of selected technologies to the unique constraints of the Cigéo’s severe environment. Using fluorine-doped silica optical fibre surrounded by a carbon layer and polyimide coating, it is possible to exploit its Raman, Brillouin and Rayleigh scattering signatures to achieve the distributed sensing of the temperature and the strain inside the repository cells of radioactive wastes. Regarding the dose measurement, promising solutions are proposed based on Radiation Induced Attenuation (RIA) responses of sensitive fibres such as the P-doped ones. While for hydrogen measurements, the potential of specialty optical fibres with Pd particles embedded in their silica matrix is currently studied for this gas monitoring through its impact on the fibre Brillouin signature evolution. PMID:28608831

  18. Electrical Resistance Tomography to Monitor Mitigation of Metal-Toxic Acid-Leachates Ruby Gulch Waste Rock Repository Gilt Edge Mine Superfund Site, South Dakota USA

    Science.gov (United States)

    Versteeg, R.; Heath, G.; Richardson, A.; Paul, D.; Wangerud, K.

    2003-12-01

    At a cyanide heap-leach open-pit mine, 15-million cubic yards of acid-generating sulfides were dumped at the head of a steep-walled mountain valley, with 30 inches/year precipitation generating 60- gallons/minute ARD leachate. Remediation has reshaped the dump to a 70-acre, 3.5:1-sloped geometry, installed drainage benches and runoff diversions, and capped the repository and lined diversions with a polyethylene geomembrane and cover system. Monitoring was needed to evaluate (a) long-term geomembrane integrity, (b) diversion liner integrity and long-term effectiveness, (c) ARD geochemistry, kinetics and pore-gas dynamics within the repository mass, and (d) groundwater interactions. Observation wells were paired with a 600-electrode resistivity survey system. Using near-surface and down-hole electrodes and automated data collection and post-processing, periodic two- and three-dimensional resistivity images are developed to reflect current and changed-conditions in moisture, temperature, geochemical components, and flow-direction analysis. Examination of total resistivity values and time variances between images allows direct observation of liner and cap integrity with precise identification and location of leaks; likewise, if runoff migrates from degraded diversion ditches into the repository zone, there is an accompanying and noticeable change in resistivity values. Used in combination with monitoring wells containing borehole resistivity electrodes (calibrated with direct sampling of dump water/moisture, temperature and pore-gas composition), the resistivity arrays allow at-depth imaging of geochemical conditions within the repository mass. The information provides early indications of progress or deficiencies in de-watering and ARD- mitigation that is the remedy intent. If emerging technologies present opportunities for secondary treatment, deep resistivity images may assist in developing application methods and evaluating the effectiveness of any reagents

  19. Teaching Materials Repository

    OpenAIRE

    Stanchev, Peter; Nisheva-Pavlova, Maria; Geske, John

    2010-01-01

    The paper presents results from the development of a methodology and corresponding software tools for building an academic repository. The repository was filled up with gaming material. The repository architecture and key features of the search engine are discussed. The emphasis falls on solutions of the large set of problems concerning the development of proper mechanisms for semantics-based search in a digital repository. * This work was supported in part by the FP7 projects: Op...

  20. Effects of earthworm casts and zeolite on the two-stage composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2015-05-01

    Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21days with the optimized two-stage composting method rather than in the 90-270days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Hydrogen and methane production by co-digestion of waste activated sludge and food waste in the two-stage fermentation process: substrate conversion and energy yield.

    Science.gov (United States)

    Liu, Xinyuan; Li, Ruying; Ji, Min; Han, Li

    2013-10-01

    Batch experiments were conducted to produce hydrogen and methane from waste activated sludge and food waste by two-stage mesophilic fermentation. Hydrogen and methane production, energy yield, soluble organic matters, volatile solid removal efficiency and carbon footprint were investigated during two-stage digestion at various food waste proportions. The highest energy yield reached 14.0 kJ/g-VS at the food waste proportion of 85%, with hydrogen and methane yields of 106.4 ml-H2/g-VS and 353.5 ml-CH4/g-VS respectively. The dominant VFA composition was butyrate for co-digestion and sole food waste fermentation, whereas acetate was dominate in VFA for sole waste activated sludge fermentation. The VS removal efficiencies of co-digestion were 10-77% higher than that of waste activated sludge fermentation. Only 0.1-3.2% of the COD in feedstock was converted into hydrogen, and 14.1-40.9% to methane, with the highest value of 40.9% in methane achieved at food waste proportion of 85%. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Deep repository for long-lived low- and intermediate-level waste in Sweden (SFL 3-5): An international peer review of SKB 's preliminary safety assessment

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, N. [QuantiSci Ltd, Melton Mowbray (United Kingdom); Apted, M. [Monitor Scientific, Denver, CO (United States); Glasser, F. [Univ. of Aberdeen (United Kingdom). Dept. of Chemistry; Kessler, J. [EPRI, Inc., Palo Alto, CA (United States); Voss, C. [US Geological Survey, Reston, VA (United States)

    2000-10-01

    The SKB safety assessment of the SFL 3-5 repository (the planned deep repository for long-lived low- and intermediate level waste) can be read in two contexts: as a preliminary evaluation of the performance and design options for a repository that will not be required for perhaps forty years; or as an evaluation of a repository that might need to be sited together with the SFL 2 spent fuel repository, and whose nature and performance might thus need to be understood to a level that can be used to make wider programmatic decisions during the next five years. These two 'assessment contexts' are quite different, and an overarching issue is the fact that it was not clear to the review team which view to take. Apparently, SKB would tend towards the first context. However, it is not at all apparent to the reviewers why the second context should not be the predominant driver in the near future. The review team notes that the SFL 3-5 repository, as modelled by SKB, gives rise to potentially perceptible radionuclide releases to the environment on a timescale of hundreds of years after closure. This is in contrast to the SR 97 assessment for the SFL 2 spent fuel repository, which base scenario predicts no releases over a million year timescale. It is clear that according to SKB's SR97 and SFL3-5 analyses, for co-located facilities, it is this repository that has the potential for real radiological impacts in the immediate future. An initial recommendation from the review, is that SKB and the regulatory authorities consider which context is appropriate to the current status of the Swedish programme. This is important, because an overall impression of the reviewers is that the analysis would not be 'fit for purpose' if it were needed to assist with decision-making by SKB or the regulatory agencies. There are too many unanswered questions, and the overall impression of the safety concept is one of some fragility. Because there is no real design basis

  3. Hypergol Maintenance Facility Hazardous Waste South Staging Areas, SWMU 070 Corrective Measures Implementation

    Science.gov (United States)

    Miller, Ralinda R.

    2016-01-01

    This document presents the Corrective Measures Implementation (CMI) Year 10 Annual Report for implementation of corrective measures at the Hypergol Maintenance Facility (HMF) Hazardous Waste South Staging Areas at Kennedy Space Center, Florida. The work is being performed by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) NNK12CA15B, Task Order (TO) 07. Mr. Harry Plaza, P.E., of NASA's Environmental Assurance Branch is the Remediation Project Manager for John F. Kennedy Space Center. The Tetra Tech Program Manager is Mr. Mark Speranza, P.E., and the Tetra Tech Project Manager is Robert Simcik, P.E.

  4. General criteria for radioactive waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Maxey, M.N.; Musgrave, B.C.; Watkins, G.B.

    1979-01-01

    Techniques are being developed for conversion of radioactive wastes to solids and their placement into repositories. Criteria for such disposal are needed to assure protection of the biosphere. The ALARA (as low as reasonably achievable) principle should be applicable at all times during the disposal period. Radioactive wastes can be categorized into three classes, depending on the activity. Three approaches were developed for judging the adequacy of disposal concepts: acceptable risk, ore body comparison, and three-stage ore body comparison. (DLC)

  5. Use of groundwater lifetime expectancy for the performance assessment of a deep geologic radioactive waste repository:2. Application to a Canadian Shield environment

    CERN Document Server

    Park, Y -J; Normani, S D; Sykes, J F; Sudicky, E A

    2011-01-01

    Cornaton et al. [2007] introduced the concept of lifetime expectancy as a performance measure of the safety of subsurface repositories, based upon the travel time for contaminants released at a certain point in the subsurface to reach the biosphere or compliance area. The methodologies are applied to a hypothetical but realistic Canadian Shield crystalline rock environment, which is considered to be one of the most geologically stable areas on Earth. In an approximately 10\\times10\\times1.5 km3 hypothetical study area, up to 1000 major and intermediate fracture zones are generated from surface lineament analyses and subsurface surveys. In the study area, mean and probability density of lifetime expectancy are analyzed with realistic geologic and hydrologic shield settings in order to demonstrate the applicability of the theory and the numerical model for optimally locating a deep subsurface repository for the safe storage of spent nuclear fuel. The results demonstrate that, in general, groundwater lifetime exp...

  6. Open DOAR the Directory of Open Access Repositories

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    The last year has seen wide-spread growth in the idea of using open access repositories as a part of a research institution's accepted infrastructure. Policy development from institutions and funding bodies has also supported the growth of the repository network. The next stage of expansion will be in the provision of services and cross-repository facilities and resources. Of course, it is hoped that these will then establish a feed-back loop to encourage repository population and further repository establishment, as the potential of open access to research materials is realised. The growth of repositories has been organic, with a variety of different repositories based in departments, institutions, funding agencies or subject communities, with a range of content, both in type and subject. Existing repositories are expanding their holdings, from eprints to associated research data-sets, or with learning objects and multimedia material. This presentation will look at the development of the Directory of Open Ac...

  7. Present status and an appreciation of the consequences for recreation and outdoor leisure activities from siting a nuclear waste repository at Oskarshamn; Nulaegesanalys samt bedoemning av konsekvenser foer rekreation och friluftsliv av ett slutfoervar i Oskarshamn

    Energy Technology Data Exchange (ETDEWEB)

    Dahlstroem, Kristina

    2007-07-15

    This report describes recreation and outdoor life in and around Simpevarp/Laxemar area. It also describes the impact of constructing a final repository for spent nuclear fuel on the outdoor life. The study area in this report is situated in the parish of Misterhult, in the municipality of Oskarshamn. Oskarshamn nuclear power plant (OKG) and the interim storage facility for spent nuclear fuel (Clab) are situated within the area. The parish of Misterhult is sparsely populated and includes both houses and holiday cottages. The area is used for various kinds of recreation by inhabitants from surrounding villages and employees at OKG and SKB (Swedish Nuclear Fuel and Waste Management Co), and also by a number of different associations and by tourists. Misterhult archipelago has the highest values for recreation and outdoor life in the study area. Many water related activities, such as swimming, sailing, fishing, diving, kayaking and canoeing are conducted in the region Hamnefjaerden, Kraakelund and a walking track called Ostkustleden are three other places in the study area which are popular for outdoor life. SKB and OKG facilities are also visited by many tourists. Disturbances to the recreation and outdoor life during construction and operation of a final repository and a interim storage facility will occur in the form of increased noise and movement in the area, mostly from the traffic. The consequences of these disturbances are: Decreased serenity, which will probably decrease the enjoyment value for the people spending time in the area. The final repository in Laxemar will likely require road access that will cross the walking track. Various prevention and compensation measures, such as noise restrictions and a new section of the walking track at Ostkustleden, are suggested to minimise and/or mitigate the consequences. Also measures that increase the value of recreation and outdoor life are listed, for example an exhibition about the areas nature and culture

  8. Groundwater flow modelling in the region of the repository site of the radioactive wastes from Goiania accident-Brazil; Modelamento do fluxo de agua subterranea na regiao do repositorio dos rejeitos decorrentes do acidente radiologico de Goiania

    Energy Technology Data Exchange (ETDEWEB)

    Aquino Branco, Otavio Eurico de; Carvalho Filho, Carlos Alberto [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)

    1996-08-01

    The radioactive wastes from Goiania`s accident, with be deposited at the repository site of Abadia de Goias, located 20 km away from the city of Goiania. This paper presents a groundwater flow in confined or unconfined, heterogeneous and anisotropic porous media with variable layer thicknesses. The necessary parameters to simulate the flow were taken from technical reports and from specific studies about the region. The geological and hydrogeological studies evidence that in this area there is one aquifer type water table. The permeability coefficient evaluated for aquifer formation was 1.88x10{sup -4}cm/s and for the porosity 0.47. The average annual rate of recharge was evaluated in 0.22 m. The potentiometric map generated using the MODFLOW code showed a good a agreement between the hydraulic head simulated and that measured in the field. (author) 8 refs., 3 figs.

  9. Bases for an environmental liability management system: application to a repository for radioactive waste; Bases para um sistema de gerenciamento de responsabilidades ambientais: aplicacao a um repositorio de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)

    Tostes, Marcelo Mallat

    1999-03-15

    This thesis aims the establishment of conceptual bases for the development of Environmental Liability Management System - instruments designed to provide financial and managerial coverage to financial liabilities arising from activities that impact the environment. The document analyses the theories that link the evolution of economic thought and environment, as a means of establish the necessary framework for the development of up-to-date environmental policy instruments. From these concepts and from the analysis of environmental liability system being implemented in several countries, the bases for environmental liability systems development are drawn. Finally, a study is carried out on the application of these bases for the development of an environmental liability management system for a radioactive waste repository. (author)

  10. Can multi-criteria analysis models support the site selection for a repository for heat-generating waste?; Koennen multikriterielle Analysemodelle die Standortauswahl fuer ein Endlager fuer Waerme entwickelnde Abfaelle unterstuetzen?

    Energy Technology Data Exchange (ETDEWEB)

    Gutberlet, Daniela [DMT GmbH und Co.KG, Essen (Germany). Geschaeftsentwicklung Nukleare Entsorgung

    2015-07-01

    The decision for or against a potential site for a nuclear waste repository is highly complex and requires decision-makers to consider multiple assessment criteria. The complexity of each site and its characteristics, and the differing opinions among members of the public and advocacy groups mean t hat conflicts of interest are likely to arise. In this paper, the author suggests that multi-criteria analysis models could be used to provide methodological support during the selection process. The models can map these types of decision situations and suggest coherent solutions with relatively little formal effort. They allow users to compare different opt ions simultaneously and ensure that t heir decision-making Is conscious rather than arbitrary.

  11. Repository Rodeo Redux

    CERN Document Server

    Anez, Melissa; Donohue, Tim; Fyson, Will; Simko, Tibor; Wilcox, David

    2017-01-01

    You’ve got more repository questions and we’ve got more answers! Last year’s Repository Rodeo panel was a huge success, so we’re taking the show on the road to Brisbane for OR2017. Join representatives from the DSpace, Eprints, Fedora, Hydra, and Islandora communities as we (briefly) explain what each of our repositories actually does. We'll also talk about the directions of our respective technical and community developments, and related to the conference theme of Open: Innovation Knowledge Repositories, offer brief observations about the latest, most promising and/or most surprising innovations in our space. This panel will be a great opportunity for newcomers to Open Repositories to get a crash course on the major repository options and meet representatives from each of their communities. After a brief presentation from each representative, we'll open the session up for questions from the audience.

  12. Waste-gasification efficiency of a two-stage fluidized-bed gasification system.

    Science.gov (United States)

    Liu, Zhen-Shu; Lin, Chiou-Liang; Chang, Tsung-Jen; Weng, Wang-Chang

    2016-02-01

    This study employed a two-stage fluidized-bed gasifier as a gasification reactor and two additives (CaO and activated carbon) as the Stage-II bed material to investigate the effects of the operating temperature (700°C, 800°C, and 900°C) on the syngas composition, total gas yield, and gas-heating value during simulated waste gasification. The results showed that when the operating temperature increased from 700 to 900°C, the molar percentage of H2 in the syngas produced by the two-stage gasification process increased from 19.4 to 29.7mol% and that the total gas yield and gas-heating value also increased. When CaO was used as the additive, the molar percentage of CO2 in the syngas decreased, and the molar percentage of H2 increased. When activated carbon was used, the molar percentage of CH4 in the syngas increased, and the total gas yield and gas-heating value increased. Overall, CaO had better effects on the production of H2, whereas activated carbon clearly enhanced the total gas yield and gas-heating value. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  13. Materials Characterization Center state-of-the-art report on corrosion data pertaining to metallic barriers for nuclear-waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Merz, M.D.

    1982-10-01

    A compilation of published corrosion data on metals that have been suggested as canisters and overpack materials is presented. The data were categorized according to the solutions used in testing and divided into two parts: high-ionic strength solutions (such as seawater and brine) and low-ionic-strength waters (such as basalt and tuff waters). This distinction was made primarily because of the general difference in aggressiveness of these solutions with respect to general corrosion. A considerable amount of data indicated that titanium alloys have acceptably low uniform corrosion rates in anticipated repository sites; the other possible corrosion failure modes for titanium alloys, such as stress corrosion cracking and delayed failure due to hydrogen, have not been sufficiently studied to make any similar conclusions about lifetime with respect to these particular degradation processes. Other data suggested that iron-base alloys are sufficiently resistant to corrosion in basalt and tuff waters, although the effects of radiation and radiation combined with elevated temperature have not been reported in enough detail to conclusively qualify iron-base alloys for any particular barrier thickness in regard to uniform corrosion rate. The effect of overpack size on corrosion rate has been given little attention. A review of long-term underground data indicated that temperature and accessibility to oxygen were too different for deep geologic repositories to make the underground corrosion data directly applicable. However, the characteristics of corrosion attack, statistical treatment of data, and kinetics of corrosion showed that corrosion proceeds in a systematic and predictable way.

  14. Administrative Data Repository (ADR)

    Data.gov (United States)

    Department of Veterans Affairs — The Administrative Data Repository (ADR) was established to provide support for the administrative data elements relative to multiple categories of a person entity...

  15. Records Control Schedules Repository

    Data.gov (United States)

    National Archives and Records Administration — The Records Control Schedules (RCS) repository provides access to scanned versions of records schedules, or Standard Form 115, Request for Records Disposition...

  16. Possible effects of a proposed high-level nuclear waste repository on consumer demand for goods and services produced in the host community. An overview of the Finnish study; Ydinjaetteen loppusijoituslaitoksen mahdolliset vaikutukset kuluttajien valintoihin ja loppusijoituspaikkakunnan tuotteiden menekkiin markkinoilla

    Energy Technology Data Exchange (ETDEWEB)

    Koskinen, I.; Niva, M.; Timonen, P. [Kuluttajatutkimuskeskus, Helsinki (Finland)

    1998-12-01

    The report provides an overview of a series of reports evaluating the possible impacts of a proposed Finnish high-level nuclear waste (HLNW) repository on consumer behavior and, subsequently, on the host community` s economy. In addition to the overview, the study consists of three parts: Report I reviews the literature on the impacts of analogous industrial facilities; Report II examines the possible reactions of industry and trade, and Report III studies the consumers` risk perceptions in relation to their consuming practices. Theoretically, this series of reports is based on previous research on risk perception, with two modifications. Report II studies products currently available on the consumer market to find out what possibilities the marketplace offers to a consumer interested in environmental risks to act according to his/her risk perception. Report III studies those everyday consuming practices on the basis of which consumers define risks. These two contexts mold the consumer reaction to risks that stem from industrial installations. The proposed HLNW repository benefits the host community in various direct and indirect ways, and may create new opportunities for developing the local economy. The proposed repository may also have negative impacts on the local economy. Food production in particular and, to a lesser extent, tourism might be affected harmfully. Consumer reaction is unlikely to be targeted at other goods produced in the proposed host communities. Under normal conditions (i.e., the repository functions as planned), consumers have fairly few possibilities to identify the products of this community without an extensive search for information, given the structure of the current food market: the proposed communities have few products with specific local identity. Also, fairly few consumers are willing to spend a substantial amount of time for studying the products and their raw materials in detail. Also, consumers are confident that they can manage

  17. Disposal of waste channels and control rods and radioactive waste; Gestion de canales usados y barras de control como residuos radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Alvarez, L.

    2015-07-01

    Iberdrola and ENRESA are jointly developing a project for the characterization and conditioning of around 200 control rods and 70 used channel from Cofrentes Nuclear Power Plant. This treatment line for high level waste with a radiologic inventory that avoids using the El Cabril low level waste repository is new in Spain and incorporates specific features like the option to carry on with the conditioning stage prior to having a licensed package and available storage facility for this type of waste. (Author)

  18. United States of America activities relative to the International Atomic Energy Agency (IAEA) initiative: Records management for deep geologic repositories

    Energy Technology Data Exchange (ETDEWEB)

    Warner, P.J.

    1997-03-01

    The International Atomic Energy Agency (IAEA) has conducted consultant and advisory meetings to prepare a Technical Document which is intended to provide guidance to all IAEA Member States (otherwise known as countries) that are currently planning, designing, constructing or operating a deep or near surface geological repository for the storage and protection of vitrified high-level radioactive waste, spent fuel waste and TRU-waste (transuranic). Eleven countries of the international community are presently in various stages of siting, designing, or constructing deep geologic repositories. Member States of the IAEA have determined that the principle safety of such completed and operation sites must not rely solely on long term institutional arrangements for the retention of information. It is believed that repository siting, design, operation and postoperation information should be gathered, managed and retained in a manner that will provide information to future societies over a very long period of time. The radionuclide life is 10,000 years thus the retention of information must outlive current societies, languages, and be continually migrated to new technology to assure retrieval. This presentation will provide an overview of the status of consideration and implementation of these issues within the United States efforts relative to deep geologic repository projects.

  19. Investigation on repository layouts

    Energy Technology Data Exchange (ETDEWEB)

    Tanai, Kenji [Tokai, Works, Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan); Iwasa, Kengo; Hasegawa, Hiroshi [Head Office, Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan); Gouke, Mitsuo; Horita, Masakuni [Shimizu Corp., Tokyo (Japan); Noda, Masaru [Ohbayashi Corp., Tokyo (Japan)

    1999-11-01

    This report consists of three items : (1) Study of the repository configuration, (2) Study of the surface facilities configuration for construction, operation and backfilling, (3) Planning schedule. In the repository configuration, the basic factors influencing the design of the repository configuration are presented, and the results of studies of various possible repository configurations are presented for both hard and soft rock systems. Here, the minimum conditions regarding geological environment required to guide design are assumed, because it is difficult to determine the repository configuration without considering specific conditions of a disposal site. In the surface facility configuration, it is illustrated based on the results of construction, operation, backfilling studies for underground disposal facility and EIS report of CANADA. In the schedule, the overall schedule corresponding to the repository layout is outlined in link with the milestone of disposal schedule set forth in the government's basic policy. The assumptions and the basic conditions are summarized to examine the General Schedule from start of construction to closure of a repository. This summary is based on the technologies to be used for construction, operation and closure of a repository. The basic national policies form the framework for this review of the general schedule. (author)

  20. Summary of Geophysical Field Investigations to Constrain the Geologic Structure and Hydrologic Characteristics of Fortymile Wash Essential for Assessing the Performance of the Proposed High-Level Nuclear Waste Repository at Yucca Mountain, Nevada

    Science.gov (United States)

    Farrell, D. A.; La Femina, P.; Winterle, J.; Hill, M.; Sims, D.; Smith, M.; Green, R.; Illman, W.; Sandberg, S.; Rogers, N.

    2001-12-01

    The U.S. Department of Energy (DOE) is currently evaluating Yucca Mountain, located in southwestern Nevada, as a possible geologic high-level nuclear waste repository with a performance period of 10,000 years. Groundwater flow and possible radionuclide transport from Yucca Mountain within the saturated zone will be influenced by the geologic structure and the hydrogeologic characteristics of the subsurface in the vicinity of the site. An understanding of these characteristics is essential to evaluating the performance of the repository. South of Yucca Mountain, along the anticipated radionuclide transport pathway, uncertainties in structural geology, hydrogeologic models, and supporting data (for example, the location of the watertable transition from tuff to valley-fill, and the architecture of the basin) impact site performance assessment calculations. Some of these uncertainties will be reduced by the point information provided by the well drilling program currently being carried out by Nye County, Nevada. However, geologic and hydrologic uncertainties remain within inter-well regions which extend over several tens of square kilometers. In recognition of the uncertainties inherent in analyses based upon relatively sparse point data available for Fortymile Wash, the Center for Nuclear Waste Regulatory Analyses and the Nuclear Regulatory Commission have developed a surface geophysics program that targets the inter-well regions utilizing gravity, magnetic, electrical resistivity, and electromagnetic measurements to support confirmatory analyses and performance assessment calculations. This presentation describes various aspects of these surveys and their results. In particular, the presentation presents new models for the structure of the Fortymile Wash (including an improved mapping of the tuff valley-fill interface) based on the integrated geophysical approach and provides an independent basis for the watertable configuration over the region. By combining the

  1. Bedded-salt repository analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Guiffre, M.S.; Kaplan, M.F.; Ensminger, D.A.; Oston, S.G.; Nalbandian, J.Y.

    1980-03-31

    This report contains a description of an analysis of generic nuclear waste repository in bedded salt. This analysis was performed by TASC for inclusion in a major Lawrence Livermore Laboratory report to NRC; this report therefore should be viewed as providing more complete and detailed information about this analysis than was possible to include in the LLL report. The analysis is performed with the NUTRAN computer codes which are described in the report. The model to be analyzed is defined, and the results of a series of possible waste migration scenarios are presented. Several of these scenarios are used as the basis for a sensitivity analysis, and an uncertainty analysis utilizing Monte Carlo techniques is also performed. A new method for defining the consequences to users of a well drilled near the repository is also described, and results are presented based on two of the waste migration scenarios.

  2. Status of Proposed Repository for Latin-American Spent Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ferrada, J.J.

    2004-10-04

    This report compiles preliminary information that supports the premise that a repository is needed in Latin America and analyzes the nuclear situation (mainly in Argentina and Brazil) in terms of nuclear capabilities, inventories, and regional spent-fuel repositories. The report is based on several sources and summarizes (1) the nuclear capabilities in Latin America and establishes the framework for the need of a permanent repository, (2) the International Atomic Energy Agency (IAEA) approach for a regional spent-fuel repository and describes the support that international institutions are lending to this issue, (3) the current situation in Argentina in order to analyze the Argentinean willingness to find a location for a deep geological repository, and (4) the issues involved in selecting a location for the repository and identifies a potential location. This report then draws conclusions based on an analysis of this information. The focus of this report is mainly on spent fuel and does not elaborate on other radiological waste sources.

  3. Uncertainties in the dosimetric assessments of NORM management in conventional waste repository; Incertidumbres en las evaluaciones dosimetricas de la gestion de NORM en repositorios de residuos convencionales

    Energy Technology Data Exchange (ETDEWEB)

    Mora, J. C.; Robles, B.

    2012-07-01

    Naturally Occurring Radioactive Materials (NORM) are generated in huge quantities in several industries-NORM industries-and their management has been formerly carried out in most countries under considerations of industrial non radioactive wastes, with varying considerations on their radioactive content. As the concentration of non radioactive tonics in several of those materials is relatively high, they were treated as toxic materials. This implies that the materials must be previously conditioned using conventional methods and that the waste disposal itself must be prepared to isolate the toxic from the environment for long periods of time. Spanish regulation for these conventional toxic waste disposals include conditions that assure adequate isolation, also including considerations on their radioactive content in such a way that their management way guarantee radiological protection on the people and the environment. After the 96/29 European Directive (the European BSS), radiological implications on NORM industries and their residual materials must be considered. One option that can be considered for the disposal of NORM with activity concentrations above the established unconditional clearance level is the use of the same industrial waste disposals, if guarantees for corresponding radiological criteria are accomplished, according to Authorities establishment. This work analyses the radiological implications of the management of NORM under the considerations applicable for their management as conventional waste, emphasising in activity concentrations slightly over unconditional clearance levels specifically from 1 Bq up to 50 Bq.g{sup -}1. Resulting generic dose assessments are usually carried out under highly conservative hypothesis. This study discusses uncertainties that should be considered to include possible variation due to climate factors or other parameters used in the assessment models. (Author)13 refs.

  4. Impact of cementitious materials decalcification on transfer properties: application to radioactive waste deep repository; Influence de la decalcification de materiaux cimentaires sur les proprietes de transfert: application au stockage profond de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Perlot, C

    2005-09-15

    Cementitious materials have been selected to compose the engineering barrier system (EBS) of the French radioactive waste deep repository, because of concrete physico-chemical properties: the hydrates of the cementitious matrix and the pH of the pore solution contribute to radionuclides retention; furthermore the compactness of these materials limits elements transport. The confinement capacity of the system has to be assessed while a period at least equivalent to waste activity (up to 100.000 years). His durability was sustained by the evolution of transfer properties in accordance with cementitious materials decalcification, alteration that expresses structure long-term behavior. Then, two degradation modes were carried out, taking into account the different physical and chemical solicitations imposed by the host formation. The first mode, a static one, was an accelerated decalcification test using nitrate ammonium solution. It replicates the EBS alteration dues to underground water. Degradation kinetic was estimated by the amount of calcium leached and the measurement of the calcium hydroxide dissolution front. To evaluate the decalcification impact, samples were characterized before and after degradation in term of microstructure (porosity, pores size distribution) and of transfer properties (diffusivity, gas and water permeability). The influence of cement nature (ordinary Portland cement, blended cement) and aggregates type (lime or siliceous) was observed: experiments were repeated on different mortars mixes. On this occasion, an essential reflection on this test metrology was led. The second mode, a dynamical degradation, was performed with an environmental permeameter. It recreates the EBS solicitations ensured during the re-saturation period, distinguished by the hydraulic pressure imposed by the geologic layer and the waste exothermicity. This apparatus, based on triaxial cell functioning, allows applying on samples pressure drop between 2 and 10 MPa and

  5. Centralized mouse repositories.

    Science.gov (United States)

    Donahue, Leah Rae; Hrabe de Angelis, Martin; Hagn, Michael; Franklin, Craig; Lloyd, K C Kent; Magnuson, Terry; McKerlie, Colin; Nakagata, Naomi; Obata, Yuichi; Read, Stuart; Wurst, Wolfgang; Hörlein, Andreas; Davisson, Muriel T

    2012-10-01

    Because the mouse is used so widely for biomedical research and the number of mouse models being generated is increasing rapidly, centralized repositories are essential if the valuable mouse strains and models that have been developed are to be securely preserved and fully exploited. Ensuring the ongoing availability of these mouse strains preserves the investment made in creating and characterizing them and creates a global resource of enormous value. The establishment of centralized mouse repositories around the world for distributing and archiving these resources has provided critical access to and preservation of these strains. This article describes the common and specialized activities provided by major mouse repositories around the world.

  6. Application of the Scoping of Options and Analyzing Risk Model (SOAR) in the Modeling of Radionuclide Movement and Dose Calculation for a Hypothetical Deep Geological Repository for Nuclear Fuel Wastes

    Science.gov (United States)

    Lei, S.; Osborne, P.

    2016-12-01

    The Scoping of Options and Analyzing Risk (SOAR) model was developed by the U.S. Nuclear Regulatory Commission staff to assist in their evaluation of potential high-level radioactive waste disposal options. It is a 1-D contaminant transport code that contains a biosphere module to calculate mass fluxes and radiation dose to humans. As part of the Canadian Nuclear Safety Commission (CNSC)'s Coordinated Assessment Program to assist with the review of proposals for deep geological repositories (DGR's) for nuclear fuel wastes, CNSC conducted a research project to find out whether SOAR can be used by CNSC staff as an independent scoping tool to assist review of proponents' submissions related to safety assessment for DGRs. In the research, SOAR was applied to the post-closure safety assessment for a hypothetical DGR in sedimentary rock, as described in the 5th Case Study report by the Nuclear Waste Management Organization (NWMO) of Canada (2011). The report contains, among others, modeling of transport and releases of radionuclides at various locations within the geosphere and the radiation dose to humans over a period of one million years. One aspect covered was 1-D modeling of various scenarios and sensitivity cases with both deterministic and probabilistic approaches using SYVAC3-CC4, which stands for Systems Variability Analysis Code (generation 3, Canadian Concept generation 4), developed by Atomic Energy of Canada Limited (Kitson et al., 2000). Radionuclide fluxes and radiation dose to the humans calculated using SOAR were compared with that from NWMO's modeling. Overall, the results from the two models were similar, although SOAR gave lower mass fluxes and peak dose, mainly due to differences in modeling the waste package configurations. Sensitivity analyses indicate that both models are most sensitive to the diffusion coefficient of the geological media. The research leads to the conclusion that SOAR is a robust, user friendly, and flexible scoping tool that

  7. Anaerobic digestion of waste activated sludge—comparison of thermal pretreatments with thermal inter-stage treatments

    DEFF Research Database (Denmark)

    Bangsø Nielsen, Henrik; Thygesen, Anders; Thomsen, Anne Belinda

    2011-01-01

    BACKGROUND: Treatment methods for improved anaerobic digestion (AD) of waste activated sludge were evaluated. Pretreatments at moderate thermal (water bath at 80 °C), high thermal (loop autoclave at 130–170 °C) and thermo-chemical (170 °C/pH 10) conditions prior to AD in batch vials (40 days/37 °C......) were compared with inter-stage treatments under the same conditions carried out between two separate steps of AD (19–21 days/37 °C). Combined treatment at 80 °C with CO2/ NH3-stripping was also evaluated. RESULTS: Pretreatment at 80 °C had no effect on methane yield while inter-stage treatment gave....... CONCLUSION: Thermal treatment of waste activated sludge for improved anaerobic digestion seems more effective when applied as an inter-stage treatment rather than a pretreatment. Copyright © 2010 Society of Chemical Industry...

  8. NIA Aging Cell Repository

    Data.gov (United States)

    Federal Laboratory Consortium — To facilitate aging research on cells in culture, the NIA provides support for the NIA Aging Cell Repository, located at the Coriell Institute for Medical Research...

  9. Corticotropin, Repository Injection

    Science.gov (United States)

    ... organs such as the lungs, eyes, skin, and heart and interfere with the function of these organs); ... of the ingredients in corticotropin repository injection, or porcine (pig) proteins. Ask your pharmacist or check the ...

  10. NIDDK Central Repository

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NIDDK Central Repository stores biosamples, genetic and other data collected in designated NIDDK-funded clinical studies. The purpose of the NIDDK Central...

  11. Open pit mining profit maximization considering selling stage and waste rehabilitation cost

    Science.gov (United States)

    Muttaqin, B. I. A.; Rosyidi, C. N.

    2017-11-01

    In open pit mining activities, determination of the cut-off grade becomes crucial for the company since the cut-off grade affects how much profit will be earned for the mining company. In this study, we developed a cut-off grade determination mode for the open pit mining industry considering the cost of mining, waste removal (rehabilitation) cost, processing cost, fixed cost, and selling stage cost. The main goal of this study is to develop a model of cut-off grade determination to get the maximum total profit. Secondly, this study is also developed to observe the model of sensitivity based on changes in the cost components. The optimization results show that the models can help mining company managers to determine the optimal cut-off grade and also estimate how much profit that can be earned by the mining company. To illustrate the application of the models, a numerical example and a set of sensitivity analysis are presented. From the results of sensitivity analysis, we conclude that the changes in the sales price greatly affects the optimal cut-off value and the total profit.

  12. Test case for a near-surface repository

    Energy Technology Data Exchange (ETDEWEB)

    Elert, M.; Jones, C. [Kemakta Konsult AB, Stockholm (Sweden); Nilsson, L.B. [Swedish Nuclear Fuel and Waste Co, Stockholm (Sweden); Skagius, K.; Wiborgh, M. [Kemakta Konsult AB, Stockholm (Sweden)

    1998-09-01

    A test case is presented for assessment of a near-surface disposal facility for radioactive waste. The case includes waste characterization and repository design, requirements and constraints in an assessment context, scenario development, model description and test calculations 6 refs, 12 tabs, 16 figs

  13. Numerical modeling capabilities to predict repository performance

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    This report presents a summary of current numerical modeling capabilities that are applicable to the design and performance evaluation of underground repositories for the storage of nuclear waste. The report includes codes that are available in-house, within Golder Associates and Lawrence Livermore Laboratories; as well as those that are generally available within the industry and universities. The first listing of programs are in-house codes in the subject areas of hydrology, solute transport, thermal and mechanical stress analysis, and structural geology. The second listing of programs are divided by subject into the following categories: site selection, structural geology, mine structural design, mine ventilation, hydrology, and mine design/construction/operation. These programs are not specifically designed for use in the design and evaluation of an underground repository for nuclear waste; but several or most of them may be so used.

  14. Microbial characterization of groundwater from boreholes CR9 and CR18 at CRL (2007-2009) - implications for a possible future repository for radioactive non-fuel waste

    Energy Technology Data Exchange (ETDEWEB)

    Stroes-Gascoyne, S.; Hamon, C.J. [Atomic Energy of Canada Limited, Pinawa, MB (Canada); Audette-Stuart, M.; Beaton, D.; King-Sharp, K.; Festarini, A.; Serran, M.; McMullin, D.; Kramer-Tremblay, S.; Rose, S.; Bellan, L. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    2011-07-01

    A microbiological characterization study was carried out on groundwater samples taken from various depths in boreholes CR9 and CR18 at Chalk River Laboratories (CRL), over a three-year period (2007 - 2009), as part of the technical feasibility study for siting a proposed Geologic Waste Management Facility (GWMF) at the CRL site. The characterization included a variety of methods to determine total, viable and culturable cell counts, as well as identifications using molecular methods. Results indicated a total population of 104 to 105 cells/mL of which < 1% could be cultured. However, a large percentage of this population was in fact viable and appeared to survive in a viable-but-not-culturable (VBNC) state. The microbial results combined with geochemical observations suggested that the oligotrophic biogeochemical system in CR9 may have exhausted the process of nitrate reduction but, due to a lack of electron donors (dissolved organic carbon, DOC) and acceptors (e.g., Fe(III)), is not able to lower Eh values sufficiently to allow the occurrence of sulphate reduction and methanogenesis as major processes. The results from a biofilm experiment in CR18 showed that most cells appeared to be suspended rather than attached. From a future GWMF perspective, the presence of a population of largely VBNC cells implies that, given an increased source of electron donors (DOC) and acceptors (e.g., metals) leached from the waste, microbial activity could increase significantly. This can have both positive effects, such as a lower redox potential and lower radionuclide solubility, and negative effects, such as increased radionuclide mobility, and {sup 14}C-containing gas production. It is expected that ultimately the biogeochemical system would return to its original oligotrophic conditions but the rate at which this would occur is, at present, uncertain because both waste leach rates and in situ microbial metabolic rates are unknown. The current results, limited to samples from CR

  15. Progress and Failure of Repository Projects for Radioactive Waste - a Comparative Analysis of Turning Points, Deadlock and Ways to get out

    Energy Technology Data Exchange (ETDEWEB)

    Barth, Regine; Kallenbach-Herbert, Beate (Environmental Law and Nuclear Engineering and Governance Div., Facility Safety Div., Oeko-Institut e.V. Darmstadt (Germany)), e-mail: r.barth@oeko.de

    2009-12-15

    The examples of factors that may support or obstruct a disposal process give an overview of results from empirical studies with regard to the selected issues in site selection and approval procedure and public participation. They reveal how experience from disposal projects in different countries and from other large infrastructure projects may contribute to the shaping of national disposal projects. As was to be expected project specific features limit the level of detail with which factors of success or failure can be described. On the other hand a relatively large number of factors on a generic level can be identified. They give a clear indication as to which issues are important for the successful implementation of a disposal project for high active waste. The project specific implementation of generic success factors on the national level requires an additional step of analysis. In that step a detailed adaption under consideration of the specific situation and circumstances of a project can be performed

  16. Development of a Equipment to Measure Gas Transport Properties: Application to Study Mixtures of Candidates Buffer Materials for Low-Medium Level Waste Repositories

    Energy Technology Data Exchange (ETDEWEB)

    Martin, P.L.; Barcala, J.M.; Oller, J.C.

    2002-07-01

    This report describes the design, the construction and a testing of a system set-up for the measurement of gas transport, created at CIEMAT, and its application to study mixtures of candidate buffer materials for Low-Medium Level Waste Repertories. The measure of the gas flows is carried on by mass flow meters of several ranges, white the pressure of the applied within the sample is controlled. Two National l Instrument's acquisition system that permits the control and recording of the parameters. A specific application developed for this test, with National Instruments LabWIEW DSC, permits to mange the system. A client interface lets to follow the experiment course from a remote location through Internet. (Author) 21 refs.

  17. Anaerobic digestion of municipal solid waste composed of food waste, wastepaper, and plastic in a single-stage system: performance and microbial community structure characterization.

    Science.gov (United States)

    Wan, Shungang; Sun, Lei; Douieb, Yaniv; Sun, Jian; Luo, Wensui

    2013-10-01

    The performance of municipal organic solid waste anaerobic digestion was investigated using a single-stage bioreactor, and the microbial community structures were characterized during the digestion. The results showed that the biogas and methane production rates were 592.4 and 370.1L/kg with volatile solid added at the ratio of 2:1:1 for food waste, wastepaper, and plastic based on dry weight. The methane volume concentration fluctuated between 44.3% and 75.4% at steady stage. Acetic acid, propionic acid, and butyric acid were the major volatile fatty acids produced during the digestion process. The anaerobic process was not inhibited by the accumulation of ammonia and free ammonia. The bacterial community was found to consist of at least 21 bands of bacteria and 12 bands of archaea at the steady state. All of the results indicated that the mixture of food waste, wastepaper, and plastic could be efficiently co-digested using the anaerobic digestion system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Principal organic materials in a repository for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Hallbeck, Lotta (Microbial Analytics Sweden AB, Moelnlycke (Sweden))

    2010-01-15

    the redox potential within the repository. The products of cellulose degradation may help enhance the complexing capacity of the groundwater around the repository, so the amount of cellulose left in the repository should be minimised. 4. Fuels and engine emissions. No important effects are expected from these organic materials in the repository. Although the presence of aromatic compounds and PAHs in groundwater is not desirable in itself, these compounds are of no consequence for long-term repository performance. 5. Detergents and lubricants. The same reasoning as for fuels and engine emissions can be applied to these materials. The amount of detergents should be minimised, although in the amounts in which they are expected to occur, no important impact is foreseen. 6. Materials from human activities. Of these materials, fibres from clothes could have a more important effect, due to the presence of cellulose. Accordingly, human-related wastes should me minimised, although no large amounts of these materials are expected to be present after repository closure. Three processes are considered to have the largest potential impact on repository performance: i) Increasing the reducing capacity and reducing the redox potential in the short term, and increasing the depletion rate of oxygen trapped during the repository operation stage. ii) Increasing the complexing capacity of the groundwater due to the presence of organic complexants, which is expected to be a more relevant process in the long term. Many organic molecules with complexing capacity, for example, short-chain organic acids such as acetate, however, will be oxidised due to microbial metabolism. The projected acetate concentration in groundwater is below the detection limit of available analytical methods. The amount of organic material in groundwater is usually only being a few mg L-1, and 25-75% of this material is non-humic material, i.e. short-chain acids. iii) Production of HS- from the oxidation of short

  19. Trust in Digital Repositories

    Directory of Open Access Journals (Sweden)

    Elizabeth Yakel

    2013-06-01

    Full Text Available ISO 16363:2012, Space Data and Information Transfer Systems - Audit and Certification of Trustworthy Digital Repositories (ISO TRAC, outlines actions a repository can take to be considered trustworthy, but research examining whether the repository’s designated community of users associates such actions with trustworthiness has been limited. Drawing from this ISO document and the management and information systems literatures, this paper discusses findings from interviews with 66 archaeologists and quantitative social scientists. We found similarities and differences across the disciplines and among the social scientists. Both disciplinary communities associated trust with a repository’s transparency. However, archaeologists mentioned guarantees of preservation and sustainability more frequently than the social scientists, who talked about institutional reputation. Repository processes were also linked to trust, with archaeologists more frequently citing metadata issues and social scientists discussing data selection and cleaning processes. Among the social scientists, novices mentioned the influence of colleagues on their trust in repositories almost twice as much as the experts. We discuss the implications our findings have for identifying trustworthy repositories and how they extend the models presented in the management and information systems literatures.

  20. Enhancement of bioenergy production from organic wastes by two-stage anaerobic hydrogen and methane production process

    DEFF Research Database (Denmark)

    Luo, Gang; Xie, Li; Zhou, Qi

    2011-01-01

    The present study investigated a two-stage anaerobic hydrogen and methane process for increasing bioenergy production from organic wastes. A two-stage process with hydraulic retention time (HRT) 3d for hydrogen reactor and 12d for methane reactor, obtained 11% higher energy compared to a single......:12 to 1:14, 6.7%, more energy could be obtained. Microbial community analysis indicated that the dominant bacterial species were different in the hydrogen reactors (Thermoanaerobacterium thermosaccharolyticum-like species) and methane reactors (Clostridium thermocellum-like species). The changes...

  1. Nevada Nuclear Waste Storage Investigations Project: thermal analysis of spent fuel disposal in vertical emplacement boreholes in a welded tuff repository

    Energy Technology Data Exchange (ETDEWEB)

    St. John, C.M.

    1985-11-01

    Two- and three-dimensional heat transfer analyses were conducted to determine temperatures in the vicinity of a waste canister and an emplacement drift. The effect of emplacement of canisters containing spent fuel in vertical boreholes was simulated for the cases of an emplacement drift either fully ventilated or sealed immediately after canister emplacement. PORFLOW and THERM3D respectively solve the two- and three-dimensional forms of the diffusion equation. In the unventilated case, the effect of radiation was approximated by defining an equivalent radiation thermal conductivity. A simple code, TEMP3D, based on the closed form solutions for constant and decaying heat sources, was also used. Calculations indicate that the temperature at the canister borehole wall will peak at about 215{sup 0}C if the drift is ventilated and about 240{sup 0}C if it is unventilated. The peak temperature occurs sooner in the ventilated case; after 3 to 4 yr versus 9 yr. For a point 1 m from the wall of the emplacement borehole, the corresponding peak temperatures are 150{sup 0}C for the ventilated case and 185{sup 0}C for the unventilated case and occur at about 5 and 17 yr. We assumed that the effect of drift ventilation would be to maintain a uniform temperature of 30{sup 0}C at the drift perimeter. If the drift is unventilated the wall rock temperature peaks some 75 to 100 yr after waste emplacement; reaching about 125{sup 0}C at the mid-height of the drift wall. Comparisons between the results of the three-dimensional analyses performed using TEMP3D and THERM3D indicated that the simpler modeling technique provided a good estimate of temperatures in the immediate vicinity of the canister for both the ventilated and unventilated cases. Comparisons of the results of two- and three-dimensional analyses performed using the PORFLOW and THERM3D codes indicated that the two-dimensional approximation is excellent, except in the immediate vicinity of the canister.

  2. Progress in evaluation of radionuclide geochemical information developed by DOE high-level nuclear waste repository site projects: Report for April 1986--September 1987

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, R.E.; Arnold, W.D.; Blencoe, J.G.; O`Kelley, G.D.; Land, J.F.

    1988-07-01

    During this report period, all experiments were conducted with tuff from the proposed high-level nuclear waste site at Yucca Mountain, Nevada. Batch sorption ratio determinations were conducted for strontium, cesium, uranium, and technetium onto samples of tuff using real and synthetic groundwater J-13. There were no significant differences in sorption ratios in experiments with real and synthetic groundwater. Columns were tested by determination of elution curves in J-13 containing tritium and technetium as the TcO{sub 4}/sup {minus}/ ion. For strontium and cesium, fairly good correlation between values of the sorption ratio obtained by the two methods was observed. Little technetium sorption was observed with either method. The elution peaks obtained with neptunium and uranium were asymmetrical and the shapes were often complex, observations which suggest irreversibilities in the sorption reaction. Synthetic groundwater J-13 was slowly dripped onto a slab of tuff maintained at 95--100{degree}C, and the result was a thin encrustation of solids on the slab as the water evaporated. Fresh J-13 groundwater was then allowed to contact the encrustation in a vessel maintained at 90{degree}C. The principal result of the experiment was a significant loss of calcium and magnesium from the fresh J-13 groundwater. 13 refs. 25 figs., 9 tabs.

  3. System studies in PA: Development of process influence diagram (PID) for SFR-1 repository near-field + far-field

    Energy Technology Data Exchange (ETDEWEB)

    Stenhouse, M.J. [Monitor Scientific, LLC, Denver, CO (United States); Miller, W.M.; Chapman, N.A. [QuantiSci Ltd., Melton Mowbray (United Kingdom)

    2001-05-01

    Scenario development is a key component of the performance assessment (PA) process for radioactive waste disposal, the primary objective being to ensure that all relevant factors associated with the future evolution of the repository system are properly considered in PA. As part of scenario development, a list of features, events and processes (FEPs) are identified and assembled, representing the Process System, with interactions/influences between FEPs incorporated in a Process Influence Diagram (PID). This report documents the technical work conducted between 1997 and the end of 1999 under the Systems Studies Project. The overall objective of this project has been the construction of a PID for the SFR-1 repository (final repository for reactor waste), this PID being the first stage in the identification of scenarios to describe future evolution of this repository. The PIDs discussed in this report have been created using two software applications: existing commercial software (Business Modeller, Infotool AB. Stockholm, Sweden) and, more recently, a newly developed software tool SPARTA (Enviros QuantiSci, Henley, U.K.). Although the focus of this report is on the application of SPARTA to PID development, it is important to document the work carried out prior to SPARTA being available, in order to provide a complete record of the entire SFR-1 PID development effort as well as preserving the context of the multi-year project. Following a description of the different disposal sections of the SFR-1 and the various near-field barriers, the sequential development (i.e. near-field of Silo, BMA, BLA, BTF sections; far-field; integrated near-field + far-field) of the PID for SFR-1 repository system using Business Modeller is described. Owing to the complexity of the repository, in terms of number of both different disposal sections (Silo, BLA, BMA, BTF) and barriers associated with each section, the two-dimensional (2D) PID created for SFR-1 using Business Modeller is

  4. Comparing Repository Types - Challenges and barriers for subject-based repositories, research repositories, national repository systems and institutional repositories in serving scholarly communication

    CERN Document Server

    Armbruster, Chris

    2010-01-01

    After two decades of repository development, some conclusions may be drawn as to which type of repository and what kind of service best supports digital scholarly communication, and thus the production of new knowledge. Four types of publication repository may be distinguished, namely the subject-based repository, research repository, national repository system and institutional repository. Two important shifts in the role of repositories may be noted. With regard to content, a well-defined and high quality corpus is essential. This implies that repository services are likely to be most successful when constructed with the user and reader uppermost in mind. With regard to service, high value to specific scholarly communities is essential. This implies that repositories are likely to be most useful to scholars when they offer dedicated services supporting the production of new knowledge. Along these lines, challenges and barriers to repository development may be identified in three key dimensions: a) identific...

  5. The Computational Materials Repository

    DEFF Research Database (Denmark)

    Landis, David D.; Hummelshøj, Jens S.; Nestorov, Svetlozar

    2012-01-01

    The possibilities for designing new materials based on quantum physics calculations are rapidly growing, but these design efforts lead to a significant increase in the amount of computational data created. The Computational Materials Repository (CMR) addresses this data challenge and provides...

  6. CRIS and Institutional Repositories

    Directory of Open Access Journals (Sweden)

    A Asserson

    2010-04-01

    Full Text Available CRIS (Current Research Information Systems provide researchers, research managers, innovators, and others with a view over the research activity of a domain. IRs (institutional repositories provide a mechanism for an organisation to showcase through OA (open access its intellectual property. Increasingly, organizations are mandating that their employed researchers deposit peer-reviewed published material in the IR. Research funders are increasingly mandating that publications be deposited in an open access repository: some mandate a central (or subject-based repository, some an IR. In parallel, publishers are offering OA but replacing subscription-based access with author (or author institution payment for publishing. However, many OA repositories have metadata based on DC (Dublin Core which is inadequate; a CERIF (Common-European Research Information Format CRIS provides metadata describing publications with formal syntax and declared semantics thus facilitating interoperation or homogeneous access over heterogeneous sources. The formality is essential for research output metrics, which are increasingly being used to determine future funding for research organizations.

  7. The anion-exchange substrate shuttle process: A new approach to two-stage biomethanation of organic and toxic wastes.

    Science.gov (United States)

    Thiele, J H; Zeikus, J G

    1988-04-20

    A novel biomethanation process configuration is described which uses improved biocatalysts to enhance the productivity and stability of waste biomethanation systems. The design facilitates the maintenance of acetogenic and methanogenic bacteria under optimum substrate concentrations far above their K(s) values in a two-stage biomethanation system with closed loop reactors. Volatile fatty acid anions (VFA anions) are provided as substrates for the methanogenic stage by using an anion exchange unit coupled to the acidogenic stage. The slow growing and sensitive acetogenic and methanogenic bacteria are protected from oxygen, cationic pollutants, toxins, and microbial contamination by use of the substrate shuttle process. Due to the closed loop process configuration, washout of the ecoengineered biocatalysts is excluded. The modular system configuration allows industrial mass production of the system components. The new biomethanation process enhances both the BTU content of the gas and the methane production over state-of-the-art anaerobic digestor bioreactor concepts.

  8. Catsius Clay Project. Calculation and Testing of Behaviour of Unsaturated Clay as Barrier in Radioactive Waste Repositories. Stage 1: Verification Exercises

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, E. E.; Alcoverro, J.

    1999-07-01

    The prescribed flow in a rigid homogeneous isotropic unsaturated medium was considered, and two cases envisaged: i) vertical flow and ii) horizontal flow. In both cases, predictions were satisfactory for all partners. The flow in a rigid homogeneous isotropic and saturated porous medium due to a spherical source of heat was considered, and two cases envisaged: a) low porosity (analytical solution available) and b) high porosity (analytical solution not available). Temperature distributions for both case A and case B depend mainly on heat conduction. Correct predictions were found by AND, CLA, ISM, UPC, UOL and UWC. Pressure distribution for case A depends mainly on buoyancy effects. In this case correct predictions were found by AND, CLA, UPC, UOL and UWC. Pressure distribution for case B depends mainly on thermal expansion of the fluid. It has been found that only CLA, ISM, UPC and UOL found a satisfactory prediction in this case. (Author)

  9. Phase I high-level waste pretreatment and feed staging plan

    Energy Technology Data Exchange (ETDEWEB)

    Manuel, A.F.

    1996-02-05

    This document provides the preliminary planning basis for the U.S. Department of Energy (DOE) to provide a sufficient quantity of high-level waste feed to the privatization contractor during Phase I. By this analysis of candidate high-level waste feed sources, the initial quantity of high-level waste feed totals more than twice the minimum feed requirements. The flexibility of the current infrastructure within tank farms provides a variety of methods to transfer the feed to the privatization contractor`s site location. The amount and type of pretreatment (sludge washing) necessary for the Phase I processing can be tailored to support the demonstration goals without having a significant impact on glass volume (i.e., either inhibited water or caustic leaching can be used).

  10. Publishers and repositories

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    The impact of self-archiving on journals and publishers is an important topic for all those involved in scholarly communication. There is some evidence that the physics arXiv has had no impact on physics journals, while 'economic common sense' suggests that some impact is inevitable. I shall review recent studies of librarian attitudes towards repositories and journals, and place this in the context of IOP Publishing's experiences with arXiv. I shall offer some possible reasons for the mis-match between these perspectives and then discuss how IOP has linked with arXiv and experimented with OA publishing. As well as launching OA journals we have co-operated with Cornell and the arXiv on Eprintweb.org, a platform that offers new features to repository users. View Andrew Wray's biography

  11. Population Dynamics of a Single-Stage Sulfidogenic Bioreactor Treating Synthetic Zinc-Containing Waste Streams

    NARCIS (Netherlands)

    Dar, S.A.; Bijmans, M.F.M.; Dinkla, I.J.T.; Geurkink, B.; Lens, P.N.L.; Dopson, M.

    2009-01-01

    Waste streams from industrial processes such as metal smelting or mining contain high concentrations of sulfate and metals with low pH. Dissimilatory sulfate reduction carried out by sulfate-reducing bacteria (SRB) at low pH can combine sulfate reduction with metal-sulfide precipitation and thus

  12. PRESENCE OF MICROORGANISMS AT VARIOUS STAGES OF POULTRY WASTES MANAGEMENT. PART I. KERATINOLYTIC MICROORGANISMS

    Directory of Open Access Journals (Sweden)

    Ilona Wrońska

    2016-11-01

    Based on the study, the presence of keratinolytic microorganisms was found in all materials. The slime was the most numerously inhabited waste, while proper compost the least. Predominant group of microorganisms, regardless of the tested material type, was composed of bacteria.

  13. Implementation of Exhaust Gas Recirculation for Double Stage Waste Heat Recovery System on Large Container Vessel

    DEFF Research Database (Denmark)

    Andreasen, Morten; Marissal, Matthieu; Sørensen, Kim

    2014-01-01

    Concerned to push ships to have a lower impact on the environment, the International Maritime Organization are implementing stricter regulation of NOx and SOx emissions, called Tier III, within emission control areas (ECAs). Waste Heat Recovery Systems (WHRS) on container ships consist...

  14. Earthquakes - a danger to deep-lying repositories?; erdbeben: eine gefahr fuer tiefenlager?

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-03-15

    This booklet issued by the Swiss National Cooperative for the Disposal of Radioactive Waste NAGRA takes a look at geological factors concerning earthquakes and the safety of deep-lying repositories for nuclear waste. The geological processes involved in the occurrence of earthquakes are briefly looked at and the definitions for magnitude and intensity of earthquakes are discussed. Examples of damage caused by earthquakes are given. The earthquake situation in Switzerland is looked at and the effects of earthquakes on sub-surface structures and deep-lying repositories are discussed. Finally, the ideas proposed for deep-lying geological repositories for nuclear wastes are discussed.

  15. Emerging Prospects for Repository Success

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, T

    2006-01-12

    Recent events are again raising some old issues and creating new opportunities regarding the future disposition of the used, or spent, fuel from nuclear power plants. Handling these challenges well will not only help set the stage for a robust nuclear energy future, but will reflect the growing linkages among nuclear power, nuclear waste management, international security, and public and political acceptance. The emerging global nuclear regime may make spent fuel management not only more important, but improve chances of success.

  16. Groundwater flow modelling of an abandoned partially open repository

    Energy Technology Data Exchange (ETDEWEB)

    Bockgaard, Niclas (Golder Associates AB (Sweden))

    2010-12-15

    As a part of the license application, according to the nuclear activities act, for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken a series of groundwater flow modelling studies. These represent time periods with different hydraulic conditions and the simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. The modelling study presented here serves as an input for analyses of so-called future human actions that may affect the repository. The objective of the work was to investigate the hydraulic influence of an abandoned partially open repository. The intention was to illustrate a pessimistic scenario of the effect of open tunnels in comparison to the reference closure of the repository. The effects of open tunnels were studied for two situations with different boundary conditions: A 'temperate' case with present-day boundary conditions and a generic future 'glacial' case with an ice sheet covering the repository. The results were summarized in the form of analyses of flow in and out from open tunnels, the effect on hydraulic head and flow in the surrounding rock volume, and transport performance measures of flow paths from the repository to surface

  17. Proceedings of the scientific visit on crystalline rock repository development.

    Energy Technology Data Exchange (ETDEWEB)

    Mariner, Paul E.; Hardin, Ernest L.; Miksova, Jitka [RAWRA, Czech Republic

    2013-02-01

    A scientific visit on Crystalline Rock Repository Development was held in the Czech Republic on September 24-27, 2012. The visit was hosted by the Czech Radioactive Waste Repository Authority (RAWRA), co-hosted by Sandia National Laboratories (SNL), and supported by the International Atomic Energy Agency (IAEA). The purpose of the visit was to promote technical information exchange between participants from countries engaged in the investigation and exploration of crystalline rock for the eventual construction of nuclear waste repositories. The visit was designed especially for participants of countries that have recently commenced (or recommenced) national repository programmes in crystalline host rock formations. Discussion topics included repository programme development, site screening and selection, site characterization, disposal concepts in crystalline host rock, regulatory frameworks, and safety assessment methodology. Interest was surveyed in establishing a %E2%80%9Cclub,%E2%80%9D the mission of which would be to identify and address the various technical challenges that confront the disposal of radioactive waste in crystalline rock environments. The idea of a second scientific visit to be held one year later in another host country received popular support. The visit concluded with a trip to the countryside south of Prague where participants were treated to a tour of the laboratory and underground facilities of the Josef Regional Underground Research Centre.

  18. Monte Carlo simulations for generic granite repository studies

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Shaoping [Los Alamos National Laboratory; Lee, Joon H [SNL; Wang, Yifeng [SNL

    2010-12-08

    In a collaborative study between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) for the DOE-NE Office of Fuel Cycle Technologies Used Fuel Disposition (UFD) Campaign project, we have conducted preliminary system-level analyses to support the development of a long-term strategy for geologic disposal of high-level radioactive waste. A general modeling framework consisting of a near- and a far-field submodel for a granite GDSE was developed. A representative far-field transport model for a generic granite repository was merged with an integrated systems (GoldSim) near-field model. Integrated Monte Carlo model runs with the combined near- and farfield transport models were performed, and the parameter sensitivities were evaluated for the combined system. In addition, a sub-set of radionuclides that are potentially important to repository performance were identified and evaluated for a series of model runs. The analyses were conducted with different waste inventory scenarios. Analyses were also conducted for different repository radionuelide release scenarios. While the results to date are for a generic granite repository, the work establishes the method to be used in the future to provide guidance on the development of strategy for long-term disposal of high-level radioactive waste in a granite repository.

  19. Biomass waste gasification - can be the two stage process suitable for tar reduction and power generation?

    Science.gov (United States)

    Sulc, Jindřich; Stojdl, Jiří; Richter, Miroslav; Popelka, Jan; Svoboda, Karel; Smetana, Jiří; Vacek, Jiří; Skoblja, Siarhei; Buryan, Petr

    2012-04-01

    A pilot scale gasification unit with novel co-current, updraft arrangement in the first stage and counter-current downdraft in the second stage was developed and exploited for studying effects of two stage gasification in comparison with one stage gasification of biomass (wood pellets) on fuel gas composition and attainable gas purity. Significant producer gas parameters (gas composition, heating value, content of tar compounds, content of inorganic gas impurities) were compared for the two stage and the one stage method of the gasification arrangement with only the upward moving bed (co-current updraft). The main novel features of the gasifier conception include grate-less reactor, upward moving bed of biomass particles (e.g. pellets) by means of a screw elevator with changeable rotational speed and gradual expanding diameter of the cylindrical reactor in the part above the upper end of the screw. The gasifier concept and arrangement are considered convenient for thermal power range 100-350 kW(th). The second stage of the gasifier served mainly for tar compounds destruction/reforming by increased temperature (around 950°C) and for gasification reaction of the fuel gas with char. The second stage used additional combustion of the fuel gas by preheated secondary air for attaining higher temperature and faster gasification of the remaining char from the first stage. The measurements of gas composition and tar compound contents confirmed superiority of the two stage gasification system, drastic decrease of aromatic compounds with two and higher number of benzene rings by 1-2 orders. On the other hand the two stage gasification (with overall ER=0.71) led to substantial reduction of gas heating value (LHV=3.15 MJ/Nm(3)), elevation of gas volume and increase of nitrogen content in fuel gas. The increased temperature (>950°C) at the entrance to the char bed caused also substantial decrease of ammonia content in fuel gas. The char with higher content of ash leaving the

  20. Effects of rhamnolipid and initial compost particle size on the two-stage composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2014-07-01

    Composting is a potential alternative to green waste incineration or deposition in landfills. The effects of the biosurfactant rhamnolipid (RL) (at 0.0%, 0.15%, and 0.30%) and initial compost particle size (IPS) (10, 15, and 25 mm) on a new, two-stage method for composting green waste was investigated. A combination of RL addition and IPS adjustment improved the quality of the finished compost in terms of its physical characteristics, pH, C/N ratio, nutrient content, cellulose and hemicellulose contents, water-soluble carbon (WSC) content, xylanase and CMCase activities, numbers of culturable microorganisms (bacteria, actinomycetes, and fungi), and toxicity to germinating seeds. The production of a stable and mature compost required only 24 days with the optimized two-stage composting method described here rather than the 90-270 days required with traditional composting. The best quality compost was obtained with 0.15% RL and an IPS of 15 mm. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Operation of a two-stage continuous fermentation process producing hydrogen and methane from artificial food wastes

    Energy Technology Data Exchange (ETDEWEB)

    Nagai, Kohki; Mizuno, Shiho; Umeda, Yoshito; Sakka, Makiko [Toho Gas Co., Ltd. (Japan); Osaka, Noriko [Tokyo Gas Co. Ltd. (Japan); Sakka, Kazuo [Mie Univ. (Japan)

    2010-07-01

    An anaerobic two-stage continuous fermentation process with combined thermophilic hydrogenogenic and methanogenic stages (two-stage fermentation process) was applied to artificial food wastes on a laboratory scale. In this report, organic loading rate (OLR) conditions for hydrogen fermentation were optimized before operating the two-stage fermentation process. The OLR was set at 11.2, 24.3, 35.2, 45.6, 56.1, and 67.3 g-COD{sub cr} L{sup -1} day{sup -1} with a temperature of 60 C, pH5.5 and 5.0% total solids. As a result, approximately 1.8-2.0 mol-H{sub 2} mol-hexose{sup -1} was obtained at the OLR of 11.2-56.1 g-COD{sub cr} L{sup -1} day{sup -1}. In contrast, it was inferred that the hydrogen yield at the OLR of 67.3 g-COD{sub cr} L{sup -1} day{sup -1} decreased because of an increase in lactate concentration in the culture medium. The performance of the two-stage fermentation process was also evaluated over three months. The hydraulic retention time (HRT) of methane fermentation was able to be shortened 5.0 days (under OLR 12.4 g-COD{sub cr} L{sup -1} day{sup -1} conditions) when the OLR of hydrogen fermentation was 44.0 g-COD{sub cr} L{sup -1} day{sup -1}, and the average gasification efficiency of the two-stage fermentation process was 81% at the time. (orig.)

  2. Viability Assessment of a Repository at Yucca Mountain. Volume 1: Introduction and Site Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-01

    This first volume contains an introduction to the viability assessment, including the purpose, scope, waste forms, technical challenges, an historical perspective, regulatory framework, management of the repository, technical components, preparations for the license application, and repository milestones after the assessment. The second part of this first volume addresses characteristics of the Yucca Mountain site.

  3. NASA Biological Specimen Repository

    Science.gov (United States)

    McMonigal, K. A.; Pietrzyk, R. A.; Sams, C. F.; Johnson, M. A.

    2010-01-01

    The NASA Biological Specimen Repository (NBSR) was established in 2006 to collect, process, preserve and distribute spaceflight-related biological specimens from long duration ISS astronauts. This repository provides unique opportunities to study longitudinal changes in human physiology spanning may missions. The NBSR collects blood and urine samples from all participating ISS crewmembers who have provided informed consent. These biological samples are collected once before flight, during flight scheduled on flight days 15, 30, 60, 120 and within 2 weeks of landing. Postflight sessions are conducted 3 and 30 days after landing. The number of in-flight sessions is dependent on the duration of the mission. Specimens are maintained under optimal storage conditions in a manner that will maximize their integrity and viability for future research The repository operates under the authority of the NASA/JSC Committee for the Protection of Human Subjects to support scientific discovery that contributes to our fundamental knowledge in the area of human physiological changes and adaptation to a microgravity environment. The NBSR will institute guidelines for the solicitation, review and sample distribution process through establishment of the NBSR Advisory Board. The Advisory Board will be composed of representatives of all participating space agencies to evaluate each request from investigators for use of the samples. This process will be consistent with ethical principles, protection of crewmember confidentiality, prevailing laws and regulations, intellectual property policies, and consent form language. Operations supporting the NBSR are scheduled to continue until the end of U.S. presence on the ISS. Sample distribution is proposed to begin with selections on investigations beginning in 2017. The availability of the NBSR will contribute to the body of knowledge about the diverse factors of spaceflight on human physiology.

  4. Cigeo. The French deep geological repository for radioactive waste. Excavation techniques and technologies tested in underground laboratory and forecasted for the future construction of the project; Cigeo. Das franzoesische Tiefenlager fuer radioaktive Abfaelle. Im Untertagelabor getestete und fuer den kuenftigen Bau des Projekts vorgesehene Vortriebstechniken und -technologien

    Energy Technology Data Exchange (ETDEWEB)

    Chauvet, Francois [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), Chatenay-Malabry (France). Infrastructure Engineering Dept.; Bosgiraud, Jean-Michel [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), Chatenay-Malabry (France). Technological Development Program

    2015-07-01

    Cigeo is the French project for the repository of the high activity and intermediate long-lived radioactive waste. It will be situated at a depth of 500 m, In a clayish rock formation. An underground laboratory was built in the year 2000 and numerous tests are performed since 15 years, in order to know in detail the behavior of the rock and its ability to confine radioactive elements. In addition, this underground laboratory has brought and will continue to bring many lessons on the excavation methods to be chosen for the construction of Cigeo.

  5. Monitoring during the stepwise implementation of the Swedish deep repository for spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Baeckblom, Goeran [Conrox (Sweden); Almen, Karl-Erik [KEA Geokonsult AB (Sweden)

    2004-03-01

    Monitoring in this report is defined as 'Continuous or repeated observations or measurements of parameters to increase the scientific understanding of the site and the repository, to show compliance with requirements or for adaptation of plans in light of the monitoring results.' The international outlook from IAEA, OECD/NEA, CEC and some country-specific reviews presented in the report forms a necessary background to the Swedish monitoring framework. The implementation of the deep repository in Sweden is executed in phases where monitoring is an inherently integrated activity in the programme. The first phase is the site investigations when Primary Baseline conditions are established. During the following construction phase of the repository, detailed site characterisation continues in conjunction with construction of the access to the deposition area, construction of parts of the deposition area and the central service area. Monitoring is then used to track the changes to the previously established Primary Baseline conditions and distinguishing these imposed changes from natural variations or from other man-made influences. During the initial operation phase, around 200-400 canisters of spent fuel is emplaced and deposition tunnels backfilled. After up-dated evaluations, the phase of regular operation begin, where detailed characterisation, construction of the repository and waste emplacement are concurrent activities. The closure of the repository will take place when all spent fuel has been emplaced, i.e. in the latter part of this century. Monitoring during the stepwise implementation of the repository is executed of several reasons mainly to: describe the Primary Baseline conditions of the repository site, develop and demonstrate understanding of the repository site and the behaviour of engineered barriers, assist in the decision-making process, show compliance with international and national guidelines and regulations. Specific rationales for

  6. Geologyy of the Yucca Mountain Site Area, Southwestern Nevada, Chapter in Stuckless, J.S., ED., Yucca Mountain, Nevada - A Proposed Geologic Repository for High-Level Radioactive Waste (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    W.R. Keefer; J.W. Whitney; D.C. Buesch

    2006-09-25

    Yucca Mountain in southwestern Nevada is a prominent, irregularly shaped upland formed by a thick apron of Miocene pyroclastic-flow and fallout tephra deposits, with minor lava flows, that was segmented by through-going, large-displacement normal faults into a series of north-trending, eastwardly tilted structural blocks. The principal volcanic-rock units are the Tiva Canyon and Topopah Spring Tuffs of the Paintbrush Group, which consist of volumetrically large eruptive sequences derived from compositionally distinct magma bodies in the nearby southwestern Nevada volcanic field, and are classic examples of a magmatic zonation characterized by an upper crystal-rich (> 10% crystal fragments) member, a more voluminous lower crystal-poor (< 5% crystal fragments) member, and an intervening thin transition zone. Rocks within the crystal-poor member of the Topopah Spring Tuff, lying some 280 m below the crest of Yucca Mountain, constitute the proposed host rock to be excavated for the storage of high-level radioactive wastes. Separation of the tuffaceous rock formations into subunits that allow for detailed mapping and structural interpretations is based on macroscopic features, most importantly the relative abundance of lithophysae and the degree of welding. The latter feature, varying from nonwelded through partly and moderately welded to densely welded, exerts a strong control on matrix porosities and other rock properties that provide essential criteria for distinguishing hydrogeologic and thermal-mechanical units, which are of major interest in evaluating the suitability of Yucca Mountain to host a safe and permanent geologic repository for waste storage. A thick and varied sequence of surficial deposits mantle large parts of the Yucca Mountain site area. Mapping of these deposits and associated soils in exposures and in the walls of trenches excavated across buried faults provides evidence for multiple surface-rupturing events along all of the major faults during

  7. INSTITUTIONAL REPOSITORY: EMPLOYMENT IN EDUCATION

    Directory of Open Access Journals (Sweden)

    Vasyl P. Oleksyuk

    2012-11-01

    Full Text Available The article investigated the concept of «institutional repository» and determined the aspects of institutional repositories in higher education. Institutional Repositories are information systems that allow preserving, storing and disseminating scientific knowledge produced in higher education and scientific research institutions. This study presented the main aspects using institutional repositories in educational process (such as storage of scientific and educational information, means of organization activity of students, object of studying. This article produced the structure of communities and collections of the institutional. It is described the experience of implementing of DSpace in the learning process.

  8. Super blue box recycling (SUBBOR) enhanced two-stage anaerobic digestion process for recycling municipal solid waste: laboratory pilot studies.

    Science.gov (United States)

    Vogt, G M; Liu, H W; Kennedy, K J; Vogt, H S; Holbein, B E

    2002-12-01

    The super blue box recycling (SUBBOR) process is an enhanced, multi-stage anaerobic digestion process for mixed municipal solid waste (MSW) and other biomass feedstock materials. The technology centers on enhanced high solids, thermophilic digestion after steam-pressure disruption of the ligno-cellulosic fiber components that are recalcitrant to conventional anaerobic digestion. Mixed MSW, rich in organic components but also containing inorganic materials, such as glass, aluminum and steel, as well as non-digestible plastic materials, has been laboratory pilot tested with a fully integrated process train designed to treat and recycle all of the MSW components. Methane yields from the MSW were 0.36 m3 CH4/kg volatile solids (VS) representing a 40% increase over the yield obtained from conventional single stage digestion. The secondary digestion step after steam pressure disruption also provided a 40% improvement in total solids and VS reduction. The residual organic fraction following two-stage digestion was fine in texture and was recovered as a clean peat fraction with reduced contents of heavy metal and other fugitive non-digested contaminants. Mass and energy balance determinations indicated a high degree of MSW diversion from landfill disposal (>80%) was achievable by the SUBBOR process as well as substantial net electrical and thermal energy production. Continuous long-term trials of the SUBBOR process at 25,000 tonnes/year are underway.

  9. Effects of various radiation source characteristics on shielding requirements at the potential Yucca Mountain repository

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.W.; Miller, D.D. [Bechtel National, Inc., San Francisco, CA (United States); Hill, R.R. [Sandia National Labs., Albuquerque, NM (United States)

    1992-02-01

    This radiation shielding study provides dose rate information that can be used to estimate required shielding thicknesses for different repository configurations, including various hot cells and vaults in the waste-handling building, the boreholes in the underground emplacement area, and the transfer casks. The study determines gamma and neutron source strengths for various waste types and source geometries representative of conditions at the repository and determines dose rates as a function of shielding thickness for selected materials.

  10. Hydrogen from the two-stage pyrolysis of bituminous coal/waste plastics mixtures

    Czech Academy of Sciences Publication Activity Database

    Kříž, Vlastimil; Bičáková, Olga

    2011-01-01

    Roč. 36, č. 15 (2011), s. 9014-9022 ISSN 0360-3199 R&D Projects: GA ČR(CZ) GA105/07/1407 Institutional research plan: CEZ:AV0Z30460519 Keywords : hydrogen * two-stage pyrolysis * coal Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 4.054, year: 2011 http://www.sciencedirect.com/science/article/pii/S0360319911007622

  11. Management of digital preservation repositories

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Márdero Arellano

    2016-09-01

    Full Text Available The object of this work are the international experiences of implementation of digital preservation practices in repositories. It based on bibliographical survey about the beginning of digital preservation practices in digital repositories, identifying important aspects of how to manage the practices of digital preservation on repositories. Most repositories analyzed showed a double function of access and preservation, but few could be considered to be "dark archives" used only for preservation matters. The application of digital preservation standards showed that large institutions possessed detailed definitions of what stored materials could be filed and used. Repositories managers had some kind of operating budget to carry on preservation activities. Most repositories cited in the bibliography used a combination of commercial tools and free software. As a conclusion, the records analyzed reinforce the need today of the application of digital preservation strategies using the OAIS Reference Model and official audit certification actions  on the design of digital preservation repositories, to keep the integration flexibility of  functions and services that go beyond the repository.

  12. THERMAL CONDUCTIVITY OF THE POTENTIAL REPOSITORY HORIZON

    Energy Technology Data Exchange (ETDEWEB)

    J.E. BEAN

    2004-09-27

    The primary purpose of this report is to assess the spatial variability and uncertainty of bulk thermal conductivity in the host horizon for the repository at Yucca Mountain. More specifically, the lithostratigraphic units studied are located within the Topopah Spring Tuff (Tpt) and consist of the upper lithophysal zone (Tptpul), the middle nonlithophysal zone (Tptpmn), the lower lithophysal zone (Tptpll), and the lower nonlithophysal zone (Tptpln). Design plans indicate that approximately 81 percent of the repository will be excavated in the Tptpll, approximately 12 percent in the Tptpmn, and the remainder in the Tptul and Tptpln (BSC 2004 [DIRS 168370]). This report provides three-dimensional geostatistical estimates of the bulk thermal conductivity for the four stratigraphic layers of the repository horizon. The three-dimensional geostatistical estimates of matrix and lithophysal porosity, dry bulk density, and matrix thermal conductivity are also provided. This report provides input to various models and calculations that simulate heat transport through the rock mass. These models include the ''Drift Degradation Analysis, Multiscale Thermohydrologic Model, Ventilation Model and Analysis Report, Igneous Intrusion Impacts on Waste Packages and Waste Forms, Drift-Scale Coupled Processes (DST and TH Seepage) Models'', and ''Drift Scale THM Model''. These models directly or indirectly provide input to the total system performance assessment (TSPA). The main distinguishing characteristic among the lithophysal and nonlithophysal units is the percentage of large-scale (centimeters-meters) voids within the rock. The Tptpul and Tptpll, as their names suggest, have a higher percentage of lithophysae than the Tptpmn and the Tptpln. Understanding the influence of the lithophysae is of great importance to understanding bulk thermal conductivity.

  13. MIC evaluation and testing for the Yucca Mountain repository

    Energy Technology Data Exchange (ETDEWEB)

    Horn, J.M.; Rivera, A.; Lain, T.; Jones, D.A.

    1997-10-01

    The U.S. Department of Energy is engaged in a suitability study for a potential deep geological repository at Yucca Mountain (YM), Nevada, for the containment and storage of high-level nuclear waste. There is growing awareness that biotic factors could affect the integrity of the repository directly through microbially induced corrosion (MIC) of waste package (WP) materials and other repository elements. A program to determine the degree that microorganisms, especially bacteria, influence the corrosion of waste package materials has therefore been undertaken. These studies include testing candidate waste package materials for their susceptibility to MIC, and also seek to determine rates of biocorrosion under varying environmental conditions, as well as predict rates of waste package corrosion over the long term. Previous characterization of bacterial isolates derived from YM geologic material showed that many possessed biochemical activities associated with MIC, 2. Various Yucca Mountain microbes demonstrated the abilities to oxidize iron, reduce sulfate to sulfide, produce acids, and generate exopolysaccharides (or `slime`). Table 1 summarizes previously characterized YM organisms and their associated relevant activities. A subset of the characterized YM bacteria were spread on WP alloy coupons in systems designed to collect polarization resistance (Rp) data for corrosion rate calculations, and to determine cathodic and anodic potentiodynamic polarization to assess corrosion mechanisms. Coupons inoculated with bacteria were compared to those that remained sterile, to determine the bacterial contribution to overall corrosion rates.

  14. Calibration of antimony-based electrode for pH monitoring into underground components of nuclear repositories

    OpenAIRE

    Betelu, Stéphanie; Ignatiadis, Ioannis

    2012-01-01

    Nuclear waste repositories are being installed in deep excavated rock formations in some places in Europe to isolate and store radioactive waste. In France, Callovo-Oxfordian formation (COx) is potential candidate for nuclear waste repository. It is thus necessary to measure in situ the state of a structure's health during its entire life. The monitoring of the near-field rock and the knowledge of the geochemical transformations can be carried out by a set of sensors for a sustainable managem...

  15. Preliminary analyses of scenarios for potential human interference for repositories in three salt formations

    Energy Technology Data Exchange (ETDEWEB)

    1985-10-01

    Preliminary analyses of scenarios for human interference with the performance of a radioactive waste repository in a deep salt formation are presented. The following scenarios are analyzed: (1) the U-Tube Connection Scenario involving multiple connections between the repository and the overlying aquifer system; (2) the Single Borehole Intrusion Scenario involving penetration of the repository by an exploratory borehole that simultaneously connects the repository with overlying and underlying aquifers; and (3) the Pressure Release Scenario involving inflow of water to saturate any void space in the repository prior to creep closure with subsequent release under near lithostatic pressures following creep closure. The methodology to evaluate repository performance in these scenarios is described and this methodology is applied to reference systems in three candidate formations: bedded salt in the Palo Duro Basin, Texas; bedded salt in the Paradox Basin, Utah; and the Richton Salt Dome, Mississippi, of the Gulf Coast Salt Dome Basin.

  16. Layout Optimization for the Repository within a discontinuous and saturated granitic rock mass

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jhin Wung; Choi, Jong Won; Bae, Dae Seok

    2005-12-15

    The objective of the present study is a layout optimization of a single and double layer repositories within a repository site with special joint set arrangements. Single and double layer repository models, subjected to the variation of repository depth, cavern spacing, pitch, and layer spacing, are analyzed for the thermal, hydraulic, and mechanical interaction behavior during the period of 2000 years from waste emplacement. Material properties used for the granitic rock mass, rock joints, PWR spent fuel, disposal canister, compacted bentonite, backfill material, and groundwater are the data collected domestically, and foreign data are used for some of the data not available domestically. The repository model includes a saturated granitic rock mass with joints, PWR spent fuel in a disposal canister surrounded by compacted bentonite inside a deposition hole, and backfill material in the rest of the space within a repository cavern.

  17. Open Access Digital Repositories: An Indian Scenario

    OpenAIRE

    Loan, Fayaz Ahmad; Rather, Rafiq

    2007-01-01

    Open access digital Repositories give barrier-free access to literature for study and research to users worldwide. These repositories solve the pricing and permission crises for scholarly materials. This paper deals with open access repositories in India.

  18. Two-stage high-rate biogas (H2 and CH4) production from food waste using anaerobic mixed microflora

    Science.gov (United States)

    Xu, K.; Lee, D.; Kobayashi, T.; Ebie, Y.; Li, Y.; Inamori, Y.

    2010-12-01

    To achieve the high-rate H2 and CH4 production from food waste using fermentative anaerobic microflora, the effects of carbonate-alkalinity in the recirculated digestion sludge on continuous two-stage fermentation were investigated. Higher H2 production rate of 2.9 L-H2/L/day was achieved at the recycle ratio of 1.0 in an alkalinity range of 9000 to 10000 mg-CaCO3/L. The maximum CH4 production rate was stably maintained at the range of 1.85 to 1.88 L-CH4/L/day without alkalinity change. Carbonate alkalinity in digestion sludge could reduce the H2 partial pressure in the headspace of the fermentation reactors, and improve a biogas production capacity in the two-stage fermentation process. The average volatile solids degradation rate in the overall process increased as the digestion sludge recycle increased from 0.5 to 1.0. These results show that the alkalinity in recycle of the digestion sludge is crucial factor in determining biogas (H2 and CH4) production capacity and reducing the total solids.

  19. Effects of sludge recirculation rate and mixing time on performance of a prototype single-stage anaerobic digester for conversion of food wastes to biogas and energy recovery.

    Science.gov (United States)

    Ratanatamskul, Chavalit; Saleart, Tawinan

    2016-04-01

    Food wastes have been recognized as the largest waste stream and accounts for 39.25 % of total municipal solid waste in Thailand. Chulalongkorn University has participated in the program of in situ energy recovery from food wastes under the Ministry of Energy (MOE), Thailand. This research aims to develop a prototype single-stage anaerobic digestion system for biogas production and energy recovery from food wastes inside Chulalongkorn University. Here, the effects of sludge recirculation rate and mixing time were investigated as the main key parameters for the system design and operation. From the results obtained in this study, it was found that the sludge recirculation rate of 100 % and the mixing time of 60 min per day were the most suitable design parameters to achieve high efficiencies in terms of chemical oxygen demand (COD), total solids (TS), and total volatile solid (TVS) removal and also biogas production by this prototype anaerobic digester. The obtained biogas production was found to be 0.71 m(3)/kg COD and the composition of methane was 61.6 %. Moreover, the efficiencies of COD removal were as high as 82.9 % and TVS removal could reach 83.9 % at the optimal condition. Therefore, the developed prototype single-stage anaerobic digester can be highly promising for university canteen application to recover energy from food wastes via biogas production.

  20. Some points in legal regulation of radioactive waste management

    Energy Technology Data Exchange (ETDEWEB)

    Tikhankin, Anatoly; Levin, Alexander

    1999-07-01

    In Russia, the system of the legal acts regulating radioactive waste management is now in progress. Development of the federal norms and regulations on the use of atomic energy is a responsibility of Gosatomnazdor. This presentation describes in detail the work done by Gosatomnadzor in 1997/1998 on the development of the legal documents regulating the management of radioactive waste and spent nuclear material. A document of special importance is ''Burial of Radioactive Wastes. Principles, Criteria and Basic Safety Requirements''. This is discussed in some detail. For all stages of radioactive waste management, safety criteria for population and personnel are set up in strict analogy with current legislation for any other type of radiological hazard. A combined, or hybrid, safety criterion is suggested for estimation of long-term safety of radioactive waste repository systems, for the period upon termination of the established administrative monitoring after closing the repository. A dose criterion is accepted for normal radiation exposure and a risk criterion for potential radiation exposure. The safety of radioactive waste repository should be ensured by means of graded safeguard throughout the entire period of burial. Graded safeguard is based on independent barriers on the way of ionising radiation and emission of radioactive substances into the environment and protection and maintenance of these barriers. Examples show how the provisions of the document are applied in practice in the permafrost area of Russia. Permafrost soil has low water permeability, which is significant because underground water is the main transport medium in case of a leakage from a repository.

  1. Catalytic multi-stage liquefaction of coal at HTI: Bench-scale studies in coal/waste plastics coprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Pradhan, V.R.; Lee, L.K.; Stalzer, R.H. [Hydrocarbon Technologies, Inc., Lawrenceville, NJ (United States)] [and others

    1995-12-31

    The development of Catalytic Multi-Stage Liquefaction (CMSL) at HTI has focused on both bituminous and sub-bituminous coals using laboratory, bench and PDU scale operations. The crude oil equivalent cost of liquid fuels from coal has been curtailed to about $30 per barrel, thus achieving over 30% reduction in the price that was evaluated for the liquefaction technologies demonstrated in the late seventies and early eighties. Contrary to the common belief, the new generation of catalytic multistage coal liquefaction process is environmentally very benign and can produce clean, premium distillates with a very low (<10ppm) heteroatoms content. The HTI Staff has been involved over the years in process development and has made significant improvements in the CMSL processing of coals. A 24 month program (extended to September 30, 1995) to study novel concepts, using a continuous bench scale Catalytic Multi-Stage unit (30kg coal/day), has been initiated since December, 1992. This program consists of ten bench-scale operations supported by Laboratory Studies, Modelling, Process Simulation and Economic Assessments. The Catalytic Multi-Stage Liquefaction is a continuation of the second generation yields using a low/high temperature approach. This paper covers work performed between October 1994- August 1995, especially results obtained from the microautoclave support activities and the bench-scale operations for runs CMSL-08 and CMSL-09, during which, coal and the plastic components for municipal solid wastes (MSW) such as high density polyethylene (HDPE)m, polypropylene (PP), polystyrene (PS), and polythylene terphthlate (PET) were coprocessed.

  2. Long-term bio-H2 and bio-CH4 production from food waste in a continuous two-stage system: Energy efficiency and conversion pathways.

    Science.gov (United States)

    Algapani, Dalal E; Qiao, Wei; di Pumpo, Francesca; Bianchi, David; Wandera, Simon M; Adani, Fabrizio; Dong, Renjie

    2018-01-01

    Anaerobic digestion is a well-established technology for treating organic waste, but it is still under challenge for food waste due to process stability problems. In this work, continuous H2 and CH4 production from canteen food waste (FW) in a two-stage system were successfully established by optimizing process parameters. The optimal hydraulic retention time was 5d for H2 and 15d for CH4. Overall, around 59% of the total COD in FW was converted into H2 (4%) and into CH4 (55%). The fluctuations of FW characteristics did not significantly affect process performance. From the energy point view, the H2 reactor contributed much less than the methane reactor to total energy balance, but it played a key role in maintaining the stability of anaerobic treatment of food waste. Microbial characterization indicated that methane formation was through syntrophic acetate oxidation combined with hydrogenotrophic methanogenesis pathway. Copyright © 2017. Published by Elsevier Ltd.

  3. Pyrite-electrode potential measurements in reference solutions versus measured and computed redox potential: at the roots of an innovative generic pH electrode for nuclear waste repositories

    OpenAIRE

    Betelu, Stéphanie; Tournassat, Christophe; Bertrand, J; Ignatiadis, Ioannis

    2012-01-01

    Within the framework of the geochemical observation and monitoring into the underground components of nuclear repositories, the purpose of the study was to investigate, in a semi-continuous mode of monitoring, the redox potential of reference and natural solutions via a bunch of electrodes. Because, each electrode response depends upon its material nature as well as its surface properties, gold (Au) and glassy carbon (GC) electrodes were investigated as inert indicator electrodes (IIE) in add...

  4. Archaeological data as a basis for repository marker design

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, M.F.

    1982-10-01

    This report concerns the development of a marking system for a nuclear waste repository which is very likely to survive for 10,000 years. In order to provide a background on the subject, and for the preliminary design presented in this report, a discussion is presented about the issues involved in human interference with the repository system and the communication of information. A separate chapter summarizes six ancient man-made monuments including: materials, effects of associated textual information on our understanding of the monument, and other features of the ancient monument relevant to marking a repository site. The information presented in the two chapters is used to provide the basis and rationale for a preliminary marker system design presented in a final chapter. 86 refs., 22 figs., 1 tab.

  5. NIH Common Data Elements Repository

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NIH Common Data Elements (CDE) Repository has been designed to provide access to structured human and machine-readable definitions of data elements that have...

  6. Privacy Impact Assessment (PIA) Repository

    Data.gov (United States)

    Department of Veterans Affairs — This repository contains Privacy Impact Assessments (PIA) that have been vetted/approved. Section 208 of the Electronic Government Act of 2002 (E-Gov Act) requires...

  7. Towards an enterprise repository framework

    CSIR Research Space (South Africa)

    Jacobs, D

    2009-05-01

    Full Text Available The enterprise architect is dependent on the functionality of the enterprise repository to define and maintain the enterprise architecture. Two of the specific functionalities are typical ‘warehouse’ related functionalities. The one requirement...

  8. Protein-energy wasting and nutritional supplementation in patients with end-stage renal disease on hemodialysis.

    Science.gov (United States)

    Sabatino, A; Regolisti, G; Karupaiah, T; Sahathevan, S; Sadu Singh, B K; Khor, B H; Salhab, N; Karavetian, M; Cupisti, A; Fiaccadori, E

    2017-06-01

    Protein-Energy Wasting (PEW) is the depletion of protein/energy stores observed in the most advanced stages of Chronic Kidney Disease (CKD). PEW is highly prevalent among patients on chronic dialysis, and is associated with adverse clinical outcomes, high morbidity/mortality rates and increased healthcare costs. This narrative review was aimed at exploring the pathophysiology of PEW in end-stage renal disease (ESRD) on hemodialysis. The main aspects of nutritional status evaluation, intervention and monitoring in this clinical setting were described, as well as the current approaches for the prevention and treatment of ESRD-related PEW. An exhaustive literature search was performed, in order to identify the relevant studies describing the epidemiology, pathogenesis, nutritional intervention and outcome of PEW in ESRD on hemodialysis. The pathogenesis of PEW is multifactorial. Loss of appetite, reduced intake of nutrients and altered lean body mass anabolism/catabolism play a key role. Nutritional approach to PEW should be based on a careful and periodic assessment of nutritional status and on timely dietary counseling. When protein and energy intakes are reduced, nutritional supplementation by means of specific oral formulations administered during the hemodialysis session may be the first-step intervention, and represents a valid nutritional approach to PEW prevention and treatment since it is easy, effective and safe. Omega-3 fatty acids and fibers, now included in commercially available preparations for renal patients, could lend relevant added value to macronutrient supplementation. When oral supplementation fails, intradialytic parenteral nutrition can be implemented in selected patients. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  9. Post Closure Safety of the Morsleben Repository

    Energy Technology Data Exchange (ETDEWEB)

    Preuss, J.; Eilers, G.; Mauke, R.; Moeller-Hoeppe, N.; Engelhardt, H.-J.; Kreienmeyer, M.; Lerch, C.; Schrimpf, C.

    2002-02-26

    After the completion of detailed studies of the suitability the twin-mine Bartensleben-Marie, situated in the Federal State of Saxony-Anhalt (Germany), was chosen in 1970 for the disposal of low and medium level radioactive waste. The waste emplacement started in 1978 in rock cavities at the mine's fourth level, some 500 m below the surface. Until the end of the operational phase in 1998 in total about 36,800 m{sup 3} of radioactive waste was disposed of. The Morsleben LLW/ILW repository (ERAM) is now under licensing for closure. After completing the licensing procedure the repository will be sealed and backfilled to exclude any undue future impact onto man or the environment. The main safety objective is to protect the biosphere from the harmful effects of the disposed radionuclides. Furthermore, classical or conventional requirements call for ruling out or minimizing other unfavorable environmental effects. The ERAM is an abandoned rock salt and potash mine. As a consequence it has a big void volume, however small parts of the cavities are backfilled with crushed salt rocks. Other goals of the closure concept are therefore a long-term stabilization of the cavities to prevent a dipping or buckling of the ground surface. In addition, groundwater protection shall be assured. For the sealing of the repository a closure concept was developed to ensure compliance with the safety protection objectives. The concept anticipates the backfilling of the cavities with hydraulically setting backfill materials (salt concretes). The reduction of the remaining void volume in the mine causes in the case of brine intrusions a limitation of the leaching processes of the exposed potash seams. However, during the setting process the hydration heat of the concrete will lead to an increase of the temperature and hence to thermally induced stresses of the concrete and the surrounding rocks. Therefore, the influence of these stresses and deformations on the stability of the salt body

  10. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. M. Curry

    2001-01-30

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  11. Investigating hydrothermal pretreatment of food waste for two-stage fermentative hydrogen and methane co-production.

    Science.gov (United States)

    Ding, Lingkan; Cheng, Jun; Qiao, Dan; Yue, Liangchen; Li, Yu-You; Zhou, Junhu; Cen, Kefa

    2017-10-01

    The growing amount of food waste (FW) in China poses great pressure on the environment. Complex solid organics limit the hydrolysis of FW, hence impairing anaerobic digestion. This study employed hydrothermal pretreatment (HTP) to facilitate the solubilization of FW. When HTP temperature increased from 100 to 200°C, soluble carbohydrate content first increased to a peak at 140°C and then decreased, whereas total carbohydrate content was negatively correlated with increasing temperature due to the enhanced degradation and Maillard reactions. Protein solubilization was dramatically promoted after HTP, whereas protein degradation was negligibly enhanced. The hydrogen and methane yields from hydrothermally pretreated FW under the optimum condition (140°C, 20min) through two-stage fermentation were 43.0 and 511.6mL/g volatile solids, respectively, resulting in an energy conversion efficiency (ECE) of 78.6%. The ECE of pretreated FW was higher than that of untreated FW by 31.7%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Using cow dung and spent coffee grounds to enhance the two-stage co-composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2017-12-01

    The objective of this study was to determine the effects of cow dung (CD) (at 0%, 20%, and 35%) and/or spent coffee grounds (SCGs) (at 0%, 30%, and 45%) as amendments in the two-stage co-composting of green waste (GW); the percentages refer to grams of amendment per 100g of GW based on dry weights. The combined addition of CD and SCGs improved the conditions during co-composting and the quality of the compost product in terms of composting temperature; particle-size distribution; mechanical properties; nitrogen changes; low-molecular weight compounds; humic substances; the degradation of lignin, cellulose, and hemicellulose; enzyme activities; the contents of total Kjeldahl nitrogen, total phosphorus, and total potassium; and the toxicity to germinating seeds. The combined addition of 20% CD and 45% SCGs to GW resulted in the production of the highest quality compost product and did so in only 21days. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Two-stage steam gasification of waste biomass in fluidized bed at low temperature: parametric investigations and performance optimization.

    Science.gov (United States)

    Xiao, Xianbin; Meng, Xianliang; Le, Duc Dung; Takarada, Takayuki

    2011-01-01

    Steam gasification of waste biomass has been studied in a two-stage fluidized bed reactor, which has the primary pyrolysis fluidized bed using silica sand as bed material and the secondary reforming fixed bed with catalyst. The main objectives are parametric investigation and performance improvement especially at low temperature of around 600 °C using the wood chip and the pig manure compost as feedstock. Main operating variables studied are pyrolysis temperature, catalytic temperature, steam/biomass-C ratio, space velocity and different catalyst. Reaction temperatures and steam/C ratio have important role on the gasification process. About 60 vol.% H2 (dry and N2 free) and about 2.0 Nm3/kg biomass (dry and ash free basis) can be obtained under good conditions. Compared to Ni/Al2O3, Ni/BCC (Ni-loaded brown coal char) has a better ability and a hopeful prospect for the stability with coking resistance. Copyright © 2010 Elsevier Ltd. All rights reserved.

  14. Environmental effects on corrosion in the Tuff repository

    Energy Technology Data Exchange (ETDEWEB)

    Beavers, J.A.; Thompson, N.G. [Cortest Columbus, Inc., OH (USA)

    1990-02-01

    Cortest Columbus is investigating the long-term performance of container materials used for high-level waste packages as part of the information needed by the Nuclear Regulatory Commission to assess the Department of Energy`s application to construct a geologic repository for high-level radioactive waste. The scope of work consists of employing short-term techniques, to examine a wide range of possible failure modes. Long-term tests are being used to verify and further examine specific failure modes identified as important by the short-term studies. The original focus of the program was on the salt repository but the emphasis was shifted to the Tuff repository. This report summarizes the results of a literature survey performed under Task 1 of the program. The survey focuses on the influence of environmental variables on the corrosion behavior of candidate container materials for the Tuff repository. Environmental variables considered include: radiation, thermal and microbial effects. 80 refs., 44 figs., 44 tabs.

  15. Environmental assessment: Reference repository location, Hanford site, Washington

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified a reference repository location at the Hanford Site in Washington as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. The site is in the Columbia Plateau, which is one of five distinct geohydrologic settings considered for the first repository. To determine their suitability, the Hanford Site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. On the basis of the evaluations reported in this EA, the DOE has found that the Hanford site is not disqualified under the guidelines. The DOE has also found that it is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Hanford site as one of five sites suitable for characterization.

  16. Environmental assessment: Reference repository location, Hanford site, Washington

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified a reference repository location at the Hanford Site in Washington as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. The site is in the Columbia Plateau, which is one of five distinct geohydrologic settings considered for the first repository. To determine their suitability, the Hanford site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. On the basis of the evaluations reported in this EA, the DOE has found that the Hanford site is not disqualified under the guidelines. The DOE has also found that is is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Hanford site as one of five sites available for characterization.

  17. Growth Performance and Nutrient Uptake of Oil Palm Seedling in Prenursery Stage as Influenced by Oil Palm Waste Compost in Growing Media

    OpenAIRE

    Rosenani, A.B; R. Rovica; P. M. Cheah; Lim, C. T.

    2016-01-01

    The use of composted oil palm wastes in the oil palm nursery as an organic component of growing medium for oil palm seedlings seems promising in sustainable oil palm seedling production. This study was conducted to investigate the effects of six oil palm waste compost rates (0, 20, 40, 60, 80, and 100%) on the growth performance of oil palm seedling and nutrient uptake in the prenursery stage (0–3 months). The addition of oil palm compost reduced the soil bulk density (1.32 to 0.53 g cm−3) an...

  18. Can transmutation replace deep radioactive repositories?; Ersetzt Transmutation die Tiefenlagerung radioaktiver Abfaelle?

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-15

    This illustrated brief report issued by the Swiss Federal Nuclear Safety Inspectorate (ENSI) takes a look at transmutation - a method to reduce the time taken for the radioactivity of radioactive wastes to decay. The aim of such a reduction is to reduce the amount of space needed for special underground repositories for highly radioactive wastes. Transmutation is briefly described. Nuclear fuel cycles with spent fuel separation and reprocessing is examined. The large-scale feasibility of such methods is looked at and the advantages offered in connection with the design and implementation of deep nuclear waste repositories are discussed.

  19. Mont Terri Project - Heater experiment : rock and bentonite thermo-hydro-mechanical (THM) processes in the near field of a thermal source for development of deep underground high level radioactive waste repositories

    Energy Technology Data Exchange (ETDEWEB)

    Goebel, I.; Alheid, H.-J.; Kaufhold, St.; Naumann, M.; Pletsch, Th.; Plischke, I.; Schnier, H.; Schuster, K.; Sprado, K. [Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), Hannover (Germany); Meyer, T.; Miehe, R.; Wieczorek, K. [Gesellschaft fuer Anlagen und Reaktorsicherheit mbH (GRS), Braunschweig (Germany); Mayor, J.C. [Empresa Nacional de Residuos Radioactivos SA (ENRESA), Madrid (Spain); Garcia-Sineriz, J.; Rey, M. [Asociacion para la Investigacion y Desarollo Industrial de los Recursos Naturales (AITEMIN), Madrid (Spain); Alonso, E.; Lloret, A.; Munoz, J.J. [Centre Internacional de Metodos Numerics en Ingenyeria (CIMNE), Barcelona (Spain); Weber, H. [National Cooperative for the Disposal of Radioactive Waste (Nagra), Wettingen (Switzerland); Ploetze, M. [Eidgenoessische Technische Hochschule Zuerich, Institut fuer Geotechnik, Zuerich (Switzerland); Klubertanz, G. [Colenco Power Engineering Ltd, Baden (Switzerland); Ammon, Ch. [Rothpletz Lienhard und Cie AG, Aarau (Switzerland); Graf, A.; Nussbaum, Ch.; Zingg, A. [Goetechnical Institute Ltd, Saint-Ursanne (Switzerland); Bossart, P. [Federal Office of Topography (swisstopo), Wabern (Switzerland); Buehler, Ch.; Kech, M.; Trick, Th. [Solexperts AG, Moenchaltorf (Switzerland); Emmerich, K. [ITC-WGT, Karlsruhe (Germany); Fernandez, A. M. [Ciemat, Madrid (Spain)

    2007-07-01

    The long-term safety of underground permanent repositories for radioactive waste relies on a combination of several engineered and geological barriers. The interactions between a host rock formation of the type 'Opalinus Clay' and an engineered barrier of the type 'bentonite buffer' are observed in the Heater Experiment (HE) during a hydration and a heating phase. The objective of the experiment is an improved understanding of the coupled thermo-hydro-mechanical (THM) processes in a host rock-buffer system achieved by experimental observations as well as numerical modelling. The basic objectives are in detail: a) Long-term monitoring in the vicinity of the heater during hydration and heating; especially observation and study of coupled THM processes in the near field, i.e. continuous measurements of temperatures, pore pressures, displacements, electric conductivity, and analysis of the gases and water released into the rock by effect of heating; b) Determination of the properties of barrier and host rock done mainly by laboratory and in situ experiments, i.e. general mechanical and mineralogical properties, mechanical state in-situ, and changes induced by the experiment; c) Study of the interaction between host rock and bentonite buffer as well as validation and refinement of existing tools for modelling THM processes; d) Study of the behaviour and reliability of instrumentation and measuring techniques, i.e. inspection of sensors after dismantling the experimental setting. To achieve the objectives, the experiment was accompanied by an extensive programme of continuous monitoring, experimental investigations on-site as well as in laboratories, and numerical modelling of the coupled THM processes. Finally, the experiment was dismantled to provide laboratory specimens of post-heating buffer and host rock material. The continuous monitoring of the experiment by a multitude of sensors (for temperature, pore pressure, total pressure, relative

  20. REPOSITORY SURFACE FACILITIES PRIMARY SYSTEM CRANE DATA

    Energy Technology Data Exchange (ETDEWEB)

    K. Schwartztrauber

    2005-03-14

    The purpose of this calculation is to compile crane design data for the mechanical primary structures, systems, and components (SSCs) required for the repository Waste Handling Building (WHB) and Carrier Preparation Building (CPB). The work presented in this document has been prepared in accordance with Office of Civilian Radioactive Waste Management approved program document AP-3.12Q, Calculations. This calculation has been developed to supplement information previously prepared using the development plan for ''WHB/WTB Space Program Analysis for Site Recommendation'' (Reference 5), which concentrates on the primary, primary support, facility support, and miscellaneous building support areas located in the WHB and Waste Treatment Building (WTB). The development plan was completed in accordance with AP-2.13Q, ''Technical Product Development Planning''. The work in this calculation is a continuance of the work described in the previous development plan; therefore, in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities'', a new Technical Work Plan is not required.

  1. Demystifying the institutional repository for success

    CERN Document Server

    Buehler, Marianne

    2013-01-01

    Institutional repositories remain key to data storage on campus, fulfilling the academic needs of various stakeholders. Demystifying the Institutional Repository for Success is a practical guide to creating and sustaining an institutional repository through marketing, partnering, and understanding the academic needs of all stakeholders on campus. This title is divided into seven chapters, covering: traditional scholarly communication and open access publishing; the academic shift towards open access; what the successful institutional repository looks like; institutional repository collaboratio

  2. The role of natural analogs in the repository licensing process

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, W.M. [Center for Nuclear Waste Regulatory Analyses, San Antonio, TX (United States)

    1995-09-01

    The concept of a permanent geologic repository for high-level nuclear waste (NLW) is implicitly based on analogy to natural systems that have been stable for millions or billions of years. The time of radioactive and chemical toxicity of HLW exceeds the duration of human civilization, and it is impossible to demonstrate the accuracy of predictions of the behavior of engineered or social systems over such long periods.

  3. Siting regions for deep geological repositories. Why just here?; Standortgebiete fuer geologische Tiefenlager. Warum gerade hier?

    Energy Technology Data Exchange (ETDEWEB)

    Rieser, A

    2009-09-15

    This report helps to the popularization of the Nagra works accomplished for the management and disposal of the radioactive wastes in Switzerland. The programme for management and disposal of the radioactive wastes are extensively determined by regulations. Protection of mankind and environment is the primary objective. The basic storage process is considered as having been solved. The question addressed in the report is where the facility has to be built; the site selection procedure includes five steps: 1) according to their type the wastes have to be allocated to two different repositories: for low- and intermediate-level wastes (L/ILW), and for high-level and alpha-toxic wastes (HLW); 2) the safety concept for both repositories and the requirements on the geology have to be determined; 3) large suitable geological-tectonic zones must be found where repositories could be built; 4) in these geological zones a suitable host rock has to be identified; 5) the most important spatial geological conditions of the host rock (minimum depth with respect to surface erosion, maximum depth in terms of engineering requirements, lateral extent) have to be identified. Based on these criteria, three suitable siting regions for a HLW repository were found in the North of Switzerland. The preferred host rock is Opalinus clay because of its very low permeability; it is therefore an excellent barrier against nuclide transport. In the three proposed siting regions, Opalinus clay is present in sufficient volumes at a suitable depth. For a L/ILW repository six different possible siting regions were identified, five in Northern Switzerland and one in Central Switzerland. In the three siting regions found for a possible HLW repository, it would also be possible to built a combined repository for both HLW and L/ILW wastes.

  4. Biological Web Service Repositories Review.

    Science.gov (United States)

    Urdidiales-Nieto, David; Navas-Delgado, Ismael; Aldana-Montes, José F

    2017-05-01

    Web services play a key role in bioinformatics enabling the integration of database access and analysis of algorithms. However, Web service repositories do not usually publish information on the changes made to their registered Web services. Dynamism is directly related to the changes in the repositories (services registered or unregistered) and at service level (annotation changes). Thus, users, software clients or workflow based approaches lack enough relevant information to decide when they should review or re-execute a Web service or workflow to get updated or improved results. The dynamism of the repository could be a measure for workflow developers to re-check service availability and annotation changes in the services of interest to them. This paper presents a review on the most well-known Web service repositories in the life sciences including an analysis of their dynamism. Freshness is introduced in this paper, and has been used as the measure for the dynamism of these repositories. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  5. Status and development of deep geological repository in Slovak republic from geological point of view

    Directory of Open Access Journals (Sweden)

    Jozef Franzen

    2007-01-01

    Full Text Available During the operation of Slovak NPPs, production of approximately 2,300 metric tons of spent fuel expressed as heavy metal (18,654 spent fuel assemblies is expected. In addition, about 5000 metric tons of radioactive waste unfit for near surface repository at Mochovce and destined for a deep geological disposal. The safe and long-term solution of back-end fuel cycle is so highly required.One of the most favorable solutions is Deep Geological Repository (DGR. The site for a DGR, along with repository design and the engineered barrier system must ensure long-term safety of the disposal system.A preliminary set of site-selection criteria for a DGR was proposed in Slovakia, based on worldwide experience and consistent with IAEA recommendations. Main groups of criteria are: 1 geological and tectonic stability of prospective sites; 2 appropriate characteristics of host rock (lithological homogeneity, suitable hydrogeological and geochemical conditions, favourable geotechnical setting, absence of mineral resources, etc.; 3 conflict of interests (natural resources, natural and cultural heritage, protected resources of thermal waters, etc..Based on the previous geological investigations, three distinct areas (five localities were determined as the most prospective sites for construction of a DGR so far. Three of them are built by granitoids rock (Tribeč Mts., Veporske vrchy Mts. and Stolicke vrchy Mts., other consist of sedimentary rock formations (Cerova vrchovina Upland and Rimavska kotlina Basin. Objective for the next investigation stage is to perform more detailed geological characterization of the prospective sites.

  6. Feasibility study for siting of a deep repository within the Storuman municipality

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    It is SKB`s task to gather a broad body of information for the siting of a deep repository for Sweden`s spent nuclear fuel and other long-lived radioactive waste. The criteria presented by SKB serve as guidelines for the siting studies. Overviews of siting factors are compiled in general siting studies of all or parts of Sweden. Feasibility studies examine the siting prospects in potentially suitable and interested municipalities. SKB plans to carry out feasibility studies in five to ten municipalities in different parts of the country. General studies and feasibility studies are primarily based on existing material. The feasibility study in Storuman is the first to be conducted. It began during the second half of 1993 with the conclusion of an agreement between the municipality and SKB. SKB has been in charge of the execution of the feasibility study. SKB has been responsible for the summary provided in a status report published in June 1994, as well as for the conclusions and evaluations in this final report. Altogether about 30 reports have been published within the framework of the feasibility study. The purpose of the various studies have been to describe, in as much detail as possible, the prospects for siting a deep repository in the municipality of Storuman, and to shed light on the possible positive and negative consequences of such a siting. The feasibility study has led to a discussion within the municipality and the region concerning the siting of a deep repository. In SKB`s opinion, this gives all those concerned ample opportunity to become acquainted with the issues and to assert their interests and present their viewpoints at an early stage. 55 refs.

  7. An analysis of the dispute process regarding high-level nuclear waste repository siting in Toyo-cho, Japan: Decisive factors in the dispute and roles of the governments and experts

    Energy Technology Data Exchange (ETDEWEB)

    Komatsuzaki, Shunsaku; Horii, Hideyuki (Dept. of Civil Engineering, Univ. of Tokyo (Japan)); Saigo, Takahiro (Mitsubishi Research Institute, Inc. (Japan))

    2010-09-15

    The siting policy of HLW repository in Japan was 'application-based' until 2007 and Toyo-cho is the only municipality which applied for the Literature Survey. In Toyo-cho, however, a serious antagonism among citizens occurred and the application was withdrawn after the mayor was replaced by election. Our detailed analysis of the process based on the methods of political science and psychology shows five decisive factors: 1) opposing activists both in the town and from outside successfully changed citizens' perceptions of HLW by rhetorical expressions, 2) the mayor lacks careful actions and effective policy adviser, 3) NUMO, an organization which runs HLW projects, didn't effectively coordinate Toyo-cho and stakeholders, 4) the municipal government and council exercised very limited influences on the dispute despite their political authority, and 5) the existence of grant adversely influenced the citizens since it causes criticism that Toyo-cho applies a repository for grant. We finally conclude that the substantial problems, caused by the five decisive factors, were the propagation of enthusiastic opposition and the lack of peaceful deliberation based on local governance. In order to avoid enthusiastic opposition and to realize responsible decision making, or negotiation, we suggest that A) active and prompt response of experts, especially political/administrative ones, to radical opposing activities, B) solution to the adverse influence of the grant by the government's agenda

  8. Generic repository design concepts and thermal analysis (FY11).

    Energy Technology Data Exchange (ETDEWEB)

    Howard, Robert (Oak Ridge National Laboratory, Oak Ridge, TN); Dupont, Mark (Savannah River Nuclear Solutions, Aiken, SC); Blink, James A. (Lawrence Livermore National Laboratory, Livermore, CA); Fratoni, Massimiliano (Lawrence Livermore National Laboratory, Livermore, CA); Greenberg, Harris (Lawrence Livermore National Laboratory, Livermore, CA); Carter, Joe (Savannah River Nuclear Solutions, Aiken, SC); Hardin, Ernest L.; Sutton, Mark A. (Lawrence Livermore National Laboratory, Livermore, CA)

    2011-08-01

    Reference concepts for geologic disposal of used nuclear fuel and high-level radioactive waste in the U.S. are developed, including geologic settings and engineered barriers. Repository thermal analysis is demonstrated for a range of waste types from projected future, advanced nuclear fuel cycles. The results show significant differences among geologic media considered (clay/shale, crystalline rock, salt), and also that waste package size and waste loading must be limited to meet targeted maximum temperature values. In this study, the UFD R&D Campaign has developed a set of reference geologic disposal concepts for a range of waste types that could potentially be generated in advanced nuclear FCs. A disposal concept consists of three components: waste inventory, geologic setting, and concept of operations. Mature repository concepts have been developed in other countries for disposal of spent LWR fuel and HLW from reprocessing UNF, and these serve as starting points for developing this set. Additional design details and EBS concepts will be considered as the reference disposal concepts evolve. The waste inventory considered in this study includes: (1) direct disposal of SNF from the LWR fleet, including Gen III+ advanced LWRs being developed through the Nuclear Power 2010 Program, operating in a once-through cycle; (2) waste generated from reprocessing of LWR UOX UNF to recover U and Pu, and subsequent direct disposal of used Pu-MOX fuel (also used in LWRs) in a modified-open cycle; and (3) waste generated by continuous recycling of metal fuel from fast reactors operating in a TRU burner configuration, with additional TRU material input supplied from reprocessing of LWR UOX fuel. The geologic setting provides the natural barriers, and establishes the boundary conditions for performance of engineered barriers. The composition and physical properties of the host medium dictate design and construction approaches, and determine hydrologic and thermal responses of the

  9. Analyses of releases due to drilling at the potential Yucca Mountain repository

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, R.W.

    1994-04-01

    Radionuclide releases due to drilling into the potential Yucca Mountain nuclear-waste repository have been evaluated as part of a recent total-system performance assessment. The probability that a drilling event intersects a waste package is a function of the sizes of the drill bit and the waste package, and the density of placement of the containers in the repository. The magnitude of the releases is modeled as a random function that also depends on the amount of decay the radionuclides have undergone. Four cases have been analyzed, representing the combinations of two waste-package designs (small-capacity, thin-wall, vertically emplaced; and large-capacity, thick-wall, horizontally emplaced) and two repository layouts (lower thermal power dissipation, low waste-package placement density; and higher thermal power dissipation, high waste-package placement density). The results show a fairly pronounced dependence on waste-package design and slight dependence on repository layout. Given the assumptions in the model, releases from the larger containers are 4--5 times greater than from the smaller packages.

  10. Analyses of releases due to drilling at the potential Yucca Mountain repository

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, R.W. [Sandia National Labs., Albuquerque, NM (United States)

    1994-12-31

    Radionuclide releases due to drilling into the potential Yucca Mountain nuclear-waste repository have been evaluated as part of a recent total-system performance assessment. The probability that a drilling event intersects a waste package is a function of the sizes of the drill bit and the waste package, and the density of placement of the containers in the repository. The magnitude of the release is modeled as a random function that also depends on the amount of decay the radionuclides have undergone. Four cases have been analyzed, representing the combinations of two waste-package designs (small-capacity, thin-wall, vertically emplaced; and large-capacity, thick-wall, horizontally emplaced) and two repository layouts (lower thermal power dissipation, low waste-package placement density; and higher thermal power dissipation, high waste-package placement density). The results show a fairly pronounced dependence on waste-package design and slight dependence on repository layout. Given the assumptions in the model, releases from the larger containers are 4-5 times greater than from the smaller packages.

  11. The Fermilab Lattice Information Repository

    CERN Document Server

    Ostiguy, Jean-Francois; McCusker-Whiting, Michele; Michelotti, Leo

    2005-01-01

    Fermilab is a large accelerator complex with six rings and sixteen transfer beamlines operating in various modes and configurations, subject to modifications, improvements and occasional major redesign. Over the years, it became increasingly obvious that a centralized lattice repository with the ability to track revisions would be of great value. To that end, we evaluated potentially suitable revision systems, either freely available or commercial, and decided that expecting infrequent users to become fully conversant with complex revision system software was neither realistic nor practical. In this paper, we discuss technical aspects of the recently introduced FNAL Accelerator Division's Lattice Repository, whose fully web-based interface hides the complexity of Subversion, a comprehensive open source revision system. In particular we emphasize how the architecture of Subversion was a key ingredient in the technical success of the repository's implementation.

  12. Feasibility and study of the energy valorization of wood wastes by staged pyrolysis; Faisabilite et etude de la valorisation energetique de dechets de bois par pyrolyse etagee

    Energy Technology Data Exchange (ETDEWEB)

    Quirino, W.; Donnot, A.; Zoulalian, A. [Universite Henri Poincare Nancy-1, Lab. d' Etudes et de Recherches sur le Materiau Bois-UMR INRA 1093, 54 - Vandoeuvre les Nancy (France)

    2001-07-01

    Since January 1, 2002, the disposal and the free burning in the air of wood wastes is forbidden in France. In most cases, the recycling of these wastes is not achievable and the most economical way of elimination is the energy way with energy recovery. Among the three possible processes of energy valorization (combustion, gasification, pyrolysis), the staged pyrolysis seems to be the most interesting, economically, because the optimum temperature for the degradation of the associated products (mineral or organic additives) is outside the temperature range of the thermal degradation of the wood (250-550 deg. C). The feasibility of staged pyrolysis is verified at the thermo-balance scale for two wood-wastes: a wood impregnated with creosote and a wood impregnated with a saline solution of copper, chromium and arsenic. For each waste, the optimum temperature of degradation is precised and a kinetic model of thermal degradation is proposed for the dimensioning of a pilot-device. (J.S.)

  13. Evaluation of the thermal effect in a KBS-3 type repository. A literary survey

    Energy Technology Data Exchange (ETDEWEB)

    Goblet, P. [Ecole Nationale Superieure des Mines de Paris, Fontainebleau (France). Centre d' Informatique Geologique; Marsily, Ghislain de [Univ. Pierre et Marie Curie, Paris (France). Laboratoire de Geologie Appliquee

    2000-03-01

    This report provides an overview of the existing thermal studies in high-level nuclear waste disposal, based on the available literature assembled during this survey. Although the emphasis is on a granitic repository, some results obtained by experiments or numerical analyses of other rock types are also given. Excessive heat loading can generate mechanical failure of the rock, chemical degradation and transformation of the buffer and rock, water vaporisation and condensation. If the repository is backfilled and resaturated, the heat load can generate convective movement of the water and therefore, transport of dissolved elements away from the repository. The maximum temperature at the repository level is generally reached after a few hundred years, but even if the temperature starts to decrease, the total heat loading of the rock formation continues to increase, until the temperature front reaches the upper boundary of the system and releases the heat into the atmosphere. The total heat load of the host rock typically starts to decrease only after about 10,000 years. The mechanical effects can therefore peak long after the maximum temperature has been reached. The surface deformation of the rock by expansion (on the order of 1 m above a repository) is often reached at such large time-intervals. The maximum heat loading in a repository is an important design parameter when the extent of a repository is determined, given the amount of waste and the age at which this waste must be disposed. To determine this heat loading, it is necessary to define either the maximum acceptable temperature at the buffer-rock contact, and/or at the outer boundary of the canister. Design options include the nature and dimension of the buffer zone, its water saturation (in the case of clay) and the distance between canisters. The temperature distribution in the host rock, in the buffer and inside the waste package can be determined by thermal calculations, if the density of waste in the

  14. Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste mixtures

    Czech Academy of Sciences Publication Activity Database

    Straka, Pavel; Bičáková, Olga

    2014-01-01

    Roč. 39, č. 21 (2014), s. 10987-10995 ISSN 0360-3199 Institutional support: RVO:67985891 Keywords : co- gasification * waste plastics * lignite * hydrogen-rich gas Subject RIV: DM - Solid Waste and Recycling Impact factor: 3.313, year: 2014 http://authors.elsevier.com/sd/article/S0360319914014025

  15. Nevada potential repository preliminary transportation strategy Study 2. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The objectives of this study were to build on the findings of the Nevada Potential Repository Preliminary Transportation Strategy Study 1 (CRWMS M&O 1995b), and to provide additional information for input to the repository environmental impact statement (EIS) process. In addition, this study supported the future selection of a preferred rail corridor and/or heavy haul route based on defensible data, methods, and analyses. Study research did not consider proposed legislation. Planning was conducted according to the Civilian Radioactive Waste Management Program Plan (DOE 1994a). The specific objectives of Study 2 were to: eliminate or reduce data gaps, inconsistencies, and uncertainties, and strengthen the analysis performed in Study 1; develop a preliminary list of rail route evaluation criteria that could be used to solicit input from stakeholders during scoping meetings. The evaluation criteria will be revised based on comments received during scoping; restrict and refine the width of the four rail corridors identified in Study 1 to five miles or less, based on land use constraints and engineering criteria identified and established in Study 2; evaluate national-level effects of routing spent nuclear fuel and high-level waste to the four identified branch lines, including the effects of routing through or avoiding Las Vegas; continue to gather published land use information and environmental data to support the repository EIS; continue to evaluate heavy haul truck transport over three existing routes as an alternative to rail and provide sufficient information to support the repository EIS process; and evaluate secondary uses for rail (passenger use, repository construction, shared use).

  16. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L.; Breslin, J.J. (eds.)

    1981-01-01

    The papers in this volume cover the following subjects: waste isolation and the natural geohydrologic system; repository perturbations of the natural system; radionuclide migration through the natural system; and repository design technology. Individual papers are abstracted.

  17. Atomic energy. BVerwG on annulment of an operating licence issued for the Morsleben radioactive waste repository; Kernenergie. BVerwG zur Aufhebung der Betriebsgenehmigung fuer das Endlager fuer radioaktive Abfaelle in Morsleben

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-11-01

    The Federal Administrative Court (BVerwG) with a decision of 21 May 1997 reversed a judgment of Nov. 1995 and remitted it to the lower instance, Administrative Court of Sachsen-Anhalt. The subject matter is an operating licence issued for the Morsleben radwaste repository by an authority of the former GDR. Legal proceedings had been instigated for annulment of this licence. (CB) [Deutsch] Das BVerwG hat mit Urteil vom 21. Mai 1997 das Urteil des OVG Sachsen-Anhalt vom Nov. 1995 aufgehoben und an das OVG zurueckverwiesen. Es geht um eine Betriebsgenehmigung fuer das Endlager Morsleben, die von einer Behoerde der ehemaligen DDR erteilt wurde und auf deren Widerruf geklagt wurde. (CB)

  18. A comparative study of discrete fracture network and equivalent continuum models for simulating flow and transport in the far field of a hypothetical nuclear waste repository in crystalline host rock

    Science.gov (United States)

    Hadgu, Teklu; Karra, Satish; Kalinina, Elena; Makedonska, Nataliia; Hyman, Jeffrey D.; Klise, Katherine; Viswanathan, Hari S.; Wang, Yifeng

    2017-10-01

    One of the major challenges of simulating flow and transport in the far field of a geologic repository in crystalline host rock is related to reproducing the properties of the fracture network over the large volume of rock with sparse fracture characterization data. Various approaches have been developed to simulate flow and transport through the fractured rock. The approaches can be broadly divided into Discrete Fracture Network (DFN) and Equivalent Continuum Model (ECM). The DFN explicitly represents individual fractures, while the ECM uses fracture properties to determine equivalent continuum parameters. We compare DFN and ECM in terms of upscaled observed transport properties through generic fracture networks. The major effort was directed on making the DFN and ECM approaches similar in their conceptual representations. This allows for separating differences related to the interpretation of the test conditions and parameters from the differences between the DFN and ECM approaches. The two models are compared using a benchmark test problem that is constructed to represent the far field (1 × 1 × 1 km3) of a hypothetical repository in fractured crystalline rock. The test problem setting uses generic fracture properties that can be expected in crystalline rocks. The models are compared in terms of the: 1) effective permeability of the domain, and 2) nonreactive solute breakthrough curves through the domain. The principal differences between the models are mesh size, network connectivity, matrix diffusion and anisotropy. We demonstrate how these differences affect the flow and transport. We identify the factors that should be taken in consideration when selecting an approach most suitable for the site-specific conditions.

  19. Complex geological investigations to select a site for high-level waste disposal in the Krasnoyarsk region (Russia)

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, E.B.; Savonenkov, V.G.; Shabalev, S.I.; Rogozin, Yu.M. [V.G. Khlopin Radium Institute, St. Petersburg (Russian Federation); Lyubtseva, E.F. [St. Petersburg State University, St. Petersburg (Russian Federation); Revenko, Yu.A.; Sabaev, Yu.I.; Nosukhin, A.V. [Chemical Mining Company, Krasnoyarsk (Russian Federation); Milovidov, V.L. [VNIPI Promtechnologii, Moscow (Russian Federation); Lukina, N.V. [GIN RAN, Moscow (Russian Federation); Lopatin, A.P. [State Centre ' Priroda' , Krasnoyarsk branch, Krasnoyarsk (Russian Federation); Datsenko, V.M. [KNIIGiMS, Krasnoyarsk (Russian Federation); Kryzhanovsky, V.A. [' Krasnoyarskgeolsyomka' , Krasnoyarsk (Russian Federation)

    1998-07-01

    The disposal of high-level radioactive waste (HLW) in deep geological formations is now considered by the international community as the ultimate stage in the optimum solution to the general problem of radioactive waste management, although other, more hypothetical, possibilities, (e.g. transmutation, space disposal) have been considered. lt is no exaggeration to state that the creation of an underground HLW repository in the Krasnoyarsk region is the greatest of the key environmental and economic problems governing the very existence of the large nuclear company, the Mining and Chemical Company (MCC), which generates considerable quantities of radioactive wastes, including HLW. On the other hand, radioactive waste disposal is not merely a problem for the Krasnoyarsk region, but is one of the key problems determining the future development of the Russian nuclear power industry in general, particularly if the nuclear fuel cycle includes the reprocessing of spent nuclear fuel which is planned for the RT-2 plant currently under construction in the Krasnoyarsk region. lt is no accident, therefore, that the Russian Federal programme on radioactive waste management includes a special topic devoted to characterisation work in the Krasnoyarsk region with a view to selecting a site for the construction of a repository. The results of a number of international scientific research programmes have demonstrated that in the case of long-term storage of HLW and intermediate-level wastes (ILW) in the earth's surface, the risk to the population and to the biosphere in general is too great and, consequently, unacceptable. Thus, the concept of an underground radioactive waste repository has wide support among the leading nuclear countries, including the U.K., France, U.S.A., Sweden, Finland and Germany. In these countries, projects to construct repositories for the geological disposal of radioactive waste are either underway or are planned. 1 ref.

  20. Comparison of potential radiological consequences from a spent-fuel repository and natural uranium deposits

    Energy Technology Data Exchange (ETDEWEB)

    Wick, O.J.; Cloninger, M.O.

    1980-09-01

    A general criterion has been suggested for deep geological repositories containing spent fuel - the repositories should impose no greater radiological risk than due to naturally occurring uranium deposits. The following analysis investigates the rationale of that suggestion and determines whether current expectations of spent-fuel repository performance are consistent with such a criterion. In this study, reference spent-fuel repositories were compared to natural uranium-ore deposits. Comparisons were based on intrinsic characteristics, such as radionuclide inventory, depth, proximity to aquifers, and regional distribution, and actual and potential radiological consequences that are now occurring from some ore deposits and that may eventually occur from repositories and other ore deposits. The comparison results show that the repositories are quite comparable to the natural ore deposits and, in some cases, present less radiological hazard than their natural counterparts. On the basis of the first comparison, placing spent fuel in a deep geologic repository apparently reduces the hazard from natural radioactive materials occurring in the earth's crust by locating the waste in impermeable strata without access to oxidizing conditions. On the basis of the second comparison, a repository constructed within reasonable constraints presents no greater hazard than a large ore deposit. It is recommended that if the naturally radioactive environment is to be used as a basis for a criterion regarding repositories, then this criterion should be carefully constructed. The criterion should be based on the radiological quality of the waters in the immediate region of a specific repository, and it should be in terms of an acceptable potential increase in the radiological content of those waters due to the existence of the repository.

  1. National Date Palm Germplasm Repository

    Science.gov (United States)

    The National Clonal Germplasm Repository for Citrus & Dates (NCGRCD), located in Riverside, California USA, is a project of the Agricultural Research Service (ARS) of the United States Department of Agriculture (USDA). The NCGRCD maintains a collection of germplasm of date palm (Phoneix dactylifera ...

  2. Repository operational criteria comparative analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hageman, J.P.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-06-01

    The objective of the ``Repository Operational Criteria (ROC) Feasibility Studies`` (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations considering the interfaces among the components of the regulations and impacts of any potential changes to those regulations. The ROC task addresses regulatory criteria and uncertainties related to the preclosure aspects of the geologic repository. Those parts of 10 CFR Part 60 that require routine guidance or minor changes to the rule were addressed in Hageman and Chowdhury, 1992. The ROC task shows a possible need for further regulatory clarity, by major changes to the rule, related to the design bases and siting of a geologic repository operations area and radiological emergency planning in order to assure defense-in-depth. The analyses, presented in this report, resulted in the development and refinement of regulatory concepts and their supporting rationale for recommendations for potential major changes to 10 CFR Pan 0 regulations.

  3. Studies relating to human intrusion into a repository. Report pertaining to work package 11. Preliminary safety case of the Gorleben site (VSG)

    Energy Technology Data Exchange (ETDEWEB)

    Beuth, Thomas; Buhmann, Dieter; Fischer-Appelt, Klaus; Moenig, Joerg; Ruebel, Andre; Wolf, Jens [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Koeln (Germany); Bollingerfehr, Wilhelm; Filbert, Wolfgang [DBE Technology GmbH, Peine (Germany); Charlier, Frank [international nuclear safety engineering gmbh (nse), Aachen (Germany); Baltes, Bruno

    2014-10-15

    The question of the long-term safety of a repository system is inseparably linked with the intensive technical examination of the possible future evolution of the site and the repository system e. g. as a result of climatic, geologic, waste-related and repository-related processes. Here, the possible evolutions to be considered are those that have the potential to have a negative impact on the intended, furthest-possible, immediate, and lasting isolation of the radioactive waste in a defined area around the underground workings of the repository mine in salt rock, which is referred to as the containment-providing rock zone (CPRZ).

  4. Effect of aerobic pre-treatment on hydrogen and methane production in a two-stage anaerobic digestion process using food waste with different compositions.

    Science.gov (United States)

    Rafieenia, Razieh; Girotto, Francesca; Peng, Wei; Cossu, Raffaello; Pivato, Alberto; Raga, Roberto; Lavagnolo, Maria Cristina

    2017-01-01

    Aerobic pre-treatment was applied prior to two-stage anaerobic digestion process. Three different food wastes samples, namely carbohydrate rich, protein rich and lipid rich, were prepared as substrates. Effect of aerobic pre-treatment on hydrogen and methane production was studied. Pre-aeration of substrates showed no positive impact on hydrogen production in the first stage. All three categories of pre-aerated food wastes produced less hydrogen compared to samples without pre-aeration. In the second stage, methane production increased for aerated protein rich and carbohydrate rich samples. In addition, the lag phase for carbohydrate rich substrate was shorter for aerated samples. Aerated protein rich substrate yielded the best results among substrates for methane production, with a cumulative production of approximately 351ml/gVS. With regard to non-aerated substrates, lipid rich was the best substrate for CH4 production (263ml/gVS). Pre-aerated P substrate was the best in terms of total energy generation which amounted to 9.64kJ/gVS. This study revealed aerobic pre-treatment to be a promising option for use in achieving enhanced substrate conversion efficiencies and CH4 production in a two-stage AD process, particularly when the substrate contains high amounts of proteins. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. An Approach to Improve Romanian Geological Repository Planning

    Directory of Open Access Journals (Sweden)

    Veronica Andrei

    2016-04-01

    Full Text Available International standards recommend typical phases to be included within any national program for the development of a geological repository dedicated to disposal of the high level radioactive wastes generated in countries using nuclear power. However, these are not universally applicable and the content of each of these phases may need to be adapted for each national situation and regulatory and institutional framework. Several national geological repository programs have faced failures in schedules and have revised their programs to consider an adapted phased management approach. The authors have observed that in the case of those countries in the early phases of a geological repository program where boundary conditions have not been fully defined, international recommendations for handling delays/failures in the national program might not immediately help. This paper considers a case study of the influences of the national context risks on the current planning schedule of the Romanian national geological repository. It proposes an optimum solution for an integrated response to any significant adverse impact arising from these risks, enabling sustainable program planning.

  6. A Generic Water Balance Model for a Trench Repository

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn Myoung; Choi, Hee Joo [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    To quantify the exposure dose rates from the nuclide release and transport through the various pathways possible in the near- and far-fields of the LILW repository system, various scenarios are to be conveniently simulated in a straightforward manner and extensively with this GoldSim model, as similarly developed for other various types of repositories in previous studies. Through this study, a result from four scenario cases, each of which is or is not associated with water balance, are compared to each other to see what happens in different cases in which an overflow over a trench rooftop, stochastic rainfall on the trench cover, and an unsaturated flow scheme under the trench bottom are combined. The other two latter elements vary periodically owing to stochastic behavior of the time series data for the past rain-fall records. This program is ready for a total system performance assessment and is able to deterministically and probabilistically evaluate the nuclide release from a repository and farther transport into the geosphere and biosphere under various scenarios that can occur after a failure of waste packages with associated uncertainty. An illustration conducted through a study with a new water balance scheme shows the possibility of a stochastic evaluation associated with the stochastic behavior and various pathways that happen around the trench repository.

  7. Waste Handeling Building Conceptual Study

    Energy Technology Data Exchange (ETDEWEB)

    G.W. Rowe

    2000-11-06

    The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system.

  8. Grid-connected integrated community energy system. Phase II, Stage 1, final report. Conceptual design: pyrolysis and waste management systems

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-08

    The University of Minnesota is studying and planning a grid-connected integrated community energy system to include disposal of wastes from health centers and utilizing the heat generated. Following initial definition of the 7-county metropolitan region for which the solid waste management system is to be planned, information is then necessary about the nature of the waste generated within this region. Estimates of the quantities generated, generation rates, and properties of the waste to be collected and disposed of are required in order to determine the appropriate size and capacity of the system. These estimates are designated and subsequently referred to as ''system input''. Institutional information is also necessary in designing the planned system, to be compatible with existing institutional operations and procedures, or to offer a minimum amount of problems to the participating institution in the region. Initial considerations of health care institutions generating solid waste within the defined region are made on a comprehensive basis without any attempt to select out or include feasible candidate institutions, or institutional categories. As the study progresses, various criteria are used in selecting potential candidate institutional categories and institutions within the 7-county region as offering the most feasible solid waste system input to be successfully developed into a centralized program; however, it is hoped that such a system if developed could be maintained for the entire 7-county region, and remain comprehensive to the entire health care industry. (MCW)

  9. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. Curry

    2001-06-26

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  10. A transmissivity model for deformation zones in fractured crystalline rock and its possible correlation to in situ stress at the proposed high-level nuclear waste repository site at Forsmark, Sweden

    Science.gov (United States)

    Follin, Sven; Stigsson, Martin

    2014-03-01

    The Forsmark site was recently proposed by the Svensk Kärnbränslehantering AB (SKB) to serve as the potential site for construction of a future geological repository for spent high-level nuclear fuel at about 470 m depth in fractured crystalline rock. The considerations included, among other things, distance from regionally significant deformation zones with highly strained rock, lithological homogeneity, low hydraulic conductivity, groundwater salinity with an acceptable range, and lack of potential mineral resources. This report describes the calculation of transmissivity of deduced deformation zones at Forsmark and the transmissivity model used in the regional groundwater flow modeling carried out in support of the integrated site description. Besides significant decrease with increasing depth (more than four orders of magnitude over a depth of about 1 km), the calculated transmissivity values also reveal considerable spatial variability along the strikes of the zones, i.e. lateral heterogeneity (more than two orders of magnitude). A hydro-mechanical coupling is discussed, based on presented models for the tectonic evolution and the principal stress tensor. Tentatively, laboratory-scale relationships developed from normal stress experiments on a single fracture in crystalline rock can be used to estimate the maximum values of transmissivity of deduced deformation zones at Forsmark.

  11. Approaches to confirmatory testing of a groundwater flow model for sparsely fractured crystalline rock, exemplified by data from the proposed high-level nuclear waste repository site at Forsmark, Sweden

    Science.gov (United States)

    Follin, Sven; Hartley, Lee

    2014-03-01

    The Svensk Kärnbränslehantering AB (SKB) has proposed the Forsmark site as a future repository for spent high-level nuclear fuel, involving disposal at about 470 m depth in sparsely fractured crystalline bedrock. An essential part of the completed inter-disciplinary site investigation was to develop an integrated account of the site and its regional setting, including the current state of the geosphere and the biosphere as well as natural processes affecting long-term evolution. First, this report recollects the integrated understanding and some key hydraulic characteristics of the crystalline bedrock at Forsmark along with a description of the flow model set-up and the methodology used for paleoclimatic flow modeling. Second, the protocol used for site-scale groundwater flow and solute transport modeling is demonstrated. In order to conduct a quantitative assessment of groundwater flow paths at Forsmark, the standard guide for groundwater flow modeling was elaborated on, to support both discrete and porous media flow approaches. In total, four independent types of data were used to confirm that the final groundwater flow model for the crystalline bedrock was representative of site conditions.

  12. Conversion of organic solid waste to hydrogen and methane by two-stage fermentation system with reuse of methane fermenter effluent as diluting water in hydrogen fermentation.

    Science.gov (United States)

    Jung, Kyung-Won; Moon, Chungman; Cho, Si-Kyung; Kim, Sang-Hyoun; Shin, Hang-Sik; Kim, Dong-Hoon

    2013-07-01

    In this study, a two-stage system converting organic solid waste (food waste+sewage sludge) to H2 and CH4 was operated. In the first stage of dark fermentative hydrogen production (DFHP), a recently proposed method that does not require external inoculum, was applied. In the second stage, anaerobic sequencing batch reactor (ASBR) and an up-flow anaerobic sludge blanket reactor (UASBr) were followed to treat H2 fermenter effluent. (H2+CH4-ASBR) system showed better performance in terms of total biogas conversion (78.6%), while higher biogas production rate (2.03 L H2/Lsystem/d, 1.96 L CH4/Lsystem/d) was achieved in (H2+CH4-UASBr) system. To reduce the alkali addition requirement in DFHP process, CH4 fermenter effluent was tested as a diluting water. Both the ASBR and UASBr effluent was effective to keep the pH above 6 without CH4 production. In case of using ASBR effluent, H2 production dropped by 15%, but alkali addition requirement was reduced by 50%. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Thermomechanical response of WIPP repositories

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, D.E.; Wahi, K.K.; Dial, B.

    1980-05-01

    Coarsely zoned STEALTH 2D calculations were used to investigate two candidate WIPP repositories. The grid was designed for one hundred thousand years of response with modest computing costs. As a result, the early time mechanical response was compromised by non-real oscillations that could not be damped completely before a few thousand years. In spite of these oscillations, it was possible to see that the dominant effects of stress and strain peaked between one and two thousand years, at the time of maximum heat in the site. This time corresponded to the condition that the surface heat loss rate balanced the heat generation rate. Though the creep strains were quite small, a large volume of salt was involved and the effects were significant. The peak surface uplift of 75HLW was increased by about 25% due to creep. However, the deviatoric stress relaxation due to creep produced large changes in the stress fields. The Rustler layer survived reasonable failure criterion for the 75HLW case with creep, and failed both in tension and shear, according to these same criterion, when the calculation was repeated without creep. The deviatoric stress fields, with and without salt creep, concentrated near the repository as expected and also in the Rustler layer due to its relatively high Young's modulus compared to the neighboring layers. Since the time of interest is so much smaller than the 100,000 years this calculation was designed to examine, it is possible to model the WIPP stratigraphy in much more detail and still be able to calculate the response for the time of interest. A finer zoned calculation of the response of the WIPP stratigraphy to a repository similar to the 75 K watt/acre repository is modeled in this report. In this calculation the Rustler formation is modeled as a five layered formation using material properties derived from data taken at the Nome site.

  14. Separation of inerts by differential sedimentation as previous stage to anaerobic digestion of organic fraction from municipal solid waste

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, C.; Martinez, V.; Esplugas, P.

    2009-07-01

    Municipal solid waste (MSW) treatment plants have as main function the valuation of municipal waste by means of materials recovery and valuation of organic fraction. In this type of facilities, the anaerobic digestion is a biological treatment of the organic matter collected in origin or mechanically separated from the mixed MSM. The objective is its valuation under the form of biogas and organic compost. Anaerobic digestion has high energy efficiency and a good range or organic matter elimination. Nevertheless, treatment of organic matter recovered from mixed MSW presents serious operation problems due to sedimentation of heavy improper materials (sands, glasses, metals) and flotation of light materials inside the digestors and piping. (Author)

  15. The Analytical Repository Source-Term (AREST) model: Description and documentation

    Energy Technology Data Exchange (ETDEWEB)

    Liebetrau, A.M.; Apted, M.J.; Engel, D.W.; Altenhofen, M.K.; Strachan, D.M.; Reid, C.R.; Windisch, C.F.; Erikson, R.L.; Johnson, K.I.

    1987-10-01

    The geologic repository system consists of several components, one of which is the engineered barrier system. The engineered barrier system interfaces with natural barriers that constitute the setting of the repository. A model that simulates the releases from the engineered barrier system into the natural barriers of the geosphere, called a source-term model, is an important component of any model for assessing the overall performance of the geologic repository system. The Analytical Repository Source-Term (AREST) model being developed is one such model. This report describes the current state of development of the AREST model and the code in which the model is implemented. The AREST model consists of three component models and five process models that describe the post-emplacement environment of a waste package. All of these components are combined within a probabilistic framework. The component models are a waste package containment (WPC) model that simulates the corrosion and degradation processes which eventually result in waste package containment failure; a waste package release (WPR) model that calculates the rates of radionuclide release from the failed waste package; and an engineered system release (ESR) model that controls the flow of information among all AREST components and process models and combines release output from the WPR model with failure times from the WPC model to produce estimates of total release. 167 refs., 40 figs., 12 tabs.

  16. US/German Collaboration in Salt Repository Research, Design and Operation - 13243

    Energy Technology Data Exchange (ETDEWEB)

    Steininger, Walter [Karlsruhe Institute of Technology, Project Management Agency Karlsruhe - (PTKA-WTE) Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Hansen, Frank [Sandia National Laboratories, Albuquerque NM USA 87111 (United States); Biurrun, Enrique; Bollingerfehr, Wilhelm [DBE TECHNOLOGY GmbH, Eschenstr. 55, 31224 Peine (Germany)

    2013-07-01

    Recent developments in the US and Germany [1-3] have precipitated renewed efforts in salt repository investigations and related studies. Both the German rock salt repository activities and the US waste management programs currently face challenges that may adversely affect their respective current and future state-of-the-art core capabilities in rock salt repository science and technology. The research agenda being pursued by our respective countries leverages collective efforts for the benefit of both programs. The topics addressed by the US/German salt repository collaborations align well with the findings and recommendations summarized in the January 2012 US Blue Ribbon Commission on America's Nuclear Future (BRC) report [4] and are consistent with the aspirations of the key topics of the Strategic Research Agenda of the Implementing Geological Disposal of Radioactive Waste Technology Platform (IGD-TP) [5]. Against this background, a revival of joint efforts in salt repository investigations after some years of hibernation has been undertaken to leverage collective efforts in salt repository research, design, operations, and related issues for the benefit of respective programs and to form a basis for providing an attractive, cost-effective insurance against the premature loss of virtually irreplaceable scientific expertise and institutional memory. (authors)

  17. Development of integrated waste management options for irradiated graphite

    Directory of Open Access Journals (Sweden)

    Alan Wareing

    2017-08-01

    Full Text Available The European Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project sought to develop best practices in the retrieval, treatment, and disposal of irradiated graphite including other irradiated carbonaceous waste such as structural material made of graphite, nongraphitized carbon bricks, and fuel coatings. Emphasis was given on legacy irradiated graphite, as this represents a significant inventory in respective national waste management programs. This paper provides an overview of the characteristics of graphite irradiated during its use, primarily as a moderator material, within nuclear reactors. It describes the potential techniques applicable to the retrieval, treatment, recycling/reuse, and disposal of these graphite wastes. Considering the lifecycle of nuclear graphite, from manufacture to final disposal, a number of waste management options have been developed. These options consider the techniques and technologies required to address each stage of the lifecycle, such as segregation, treatment, recycle, and ultimate disposal in a radioactive waste repository, providing a toolbox to aid operators and regulators to determine the most appropriate management strategy. It is noted that national waste management programs currently have, or are in the process of developing, respective approaches to irradiated graphite management. The output of the Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project is intended to aid these considerations, rather than dictate them.

  18. Development of integrated waste management options for irradiated graphite

    Energy Technology Data Exchange (ETDEWEB)

    Wareing, Alan; Abrahamsen-Mills, Liam; Fowler, Linda; Jarvis, Richard; Banford, Anthony William [National Nuclear Laboratory, Warrington (United Kingdom); Grave, Michael [Doosan Babcock, Gateshead (United Kingdom); Metcalfe, Martin [National Nuclear Laboratory, Gloucestershire (United Kingdom); Norris, Simon [Radioactive Waste Management Limited, Oxon (United Kingdom)

    2017-08-15

    The European Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project sought to develop best practices in the retrieval, treatment, and disposal of irradiated graphite including other irradiated carbonaceous waste such as structural material made of graphite, nongraphitized carbon bricks, and fuel coatings. Emphasis was given on legacy irradiated graphite, as this represents a significant inventory in respective national waste management programs. This paper provides an overview of the characteristics of graphite irradiated during its use, primarily as a moderator material, within nuclear reactors. It describes the potential techniques applicable to the retrieval, treatment, recycling/reuse, and disposal of these graphite wastes. Considering the lifecycle of nuclear graphite, from manufacture to final disposal, a number of waste management options have been developed. These options consider the techniques and technologies required to address each stage of the lifecycle, such as segregation, treatment, recycle, and ultimate disposal in a radioactive waste repository, providing a toolbox to aid operators and regulators to determine the most appropriate management strategy. It is noted that national waste management programs currently have, or are in the process of developing, respective approaches to irradiated graphite management. The output of the Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project is intended to aid these considerations, rather than dictate them.

  19. Copper corrosion under expected conditions in a deep geologic repository

    Energy Technology Data Exchange (ETDEWEB)

    King, F. [Integrity Corrosion Consulting Ltd, Calgary, Alberta (Canada); Ahonen, L. [Geological Survey of Finland, Espoo (Finland); Taxen, C. [Swedish Corrosion Inst., Stockholm (Sweden); Vuorinen, U. [VTT Chemical Technology, Espoo (Finland); Werme, L. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2001-12-01

    Copper has been the corrosion barrier of choice for the canister in the Swedish and Finnish, nuclear waste disposal programmes for over 20 years. During that time many studies have been carried out on the corrosion behaviour of copper under conditions likely to exist in an underground nuclear disposal repository located in he Fenno-Scandian bedrock. This review is a summary of what has been learnt about the long- term behaviour of the corrosion barrier during this period and what the implications of this knowledge are for the predicted service life of the canisters. The review is based on the existing knowledge from various nuclear waste management programs around the world and from the open literature.Various areas are considered: the expected evolution of the geochemical conditions in the groundwater and of the repository environment, the thermodynamics of copper corrosion, corrosion before and during saturation of the compacted bentonite buffer by groundwater, general and localized corrosion following saturation of the compacted bentonite buffer, stress corrosion cracking, radiation effects, the implications of corrosion on the service life of the canister, and areas for further study. Much has been learnt about the long-term corrosion behaviour of copper canisters over the past 20 years. The majority of the information reviewed here is drawn from the Swedish/Finnish and Canadian programmes. Despite differences in scientific approach, and canister and repository design, the results of these two programmes both suggest that copper provides an excellent corrosion barrier in an underground repository. The conclusion drawn from this review is that the original prediction made in 1978 of canister lifetimes exceeding 100,000 years remains valid.

  20. Copper corrosion under expected conditions in a deep geologic repository

    Energy Technology Data Exchange (ETDEWEB)

    King, F.; Ahonen, L.; Taxen, C.; Vuorinen, U.; Werme, L

    2002-01-01

    Copper has been the corrosion barrier of choice for the canister in the Swedish and Finnish, nuclear waste disposal programmes for over 20 years. During that time many studies have been carried out on the corrosion behaviour of copper under conditions likely to exist in an underground nuclear disposal repository located in the Fenno-Scandian bedrock. This review is a summary of what has been learnt about the long-term behaviour of the corrosion barrier during this period and what the implications of this knowledge are for the predicted service life of the canisters. The review is based on the existing knowledge from various nuclear waste management programs around the world and from the open literature. Various areas are considered: the expected evolution of the geochemical conditions in the groundwater and of the repository environment, the thermodynamics of copper corrosion, corrosion before and during saturation of the compacted bentonite buffer by groundwater, general and localized corrosion following saturation of the compacted bentonite buffer, stress corrosion cracking, radiation effects, the implications of corrosion on the service life of the canister, and areas for further study. Much has been learnt about the long-term corrosion behaviour of copper canisters over the past 20 years. The majority of the information reviewed here is drawn from the Swedish/Finnish and Canadian programmes. Despite differences in scientific approach, and canister and repository design, the results of these two programmes both suggest that copper provides an excellent corrosion barrier in an underground repository. The conclusion drawn from this review is that the original prediction made in 1978 of canister lifetimes exceeding 100,000 years remains valid. (orig.)

  1. The leaching of trace elements from municipal solid waste incinerator bottom ash at different stages of weathering

    NARCIS (Netherlands)

    Meima, J.A.; Comans, R.N.J.

    1999-01-01

    For a proper assessment of the environmental impact of the utilisation and disposal of Municipal Solid Waste Incinerator (MSWI) bottom ash it is necessary to understand weathering processes and their effects on (trace) element leaching. The authors have investigated the processes that control the

  2. Biomass Waste Gasification – Can Be the Two Stage Process Suitable for Tar Reduction and Power Generation?

    Czech Academy of Sciences Publication Activity Database

    Šulc, J.; Štojdl, J.; Richter, M.; Popelka, J.; Svoboda, Karel; Smetana, J.; Vacek, J.; Skoblia, S.; Buryan, P.

    2012-01-01

    Roč. 32, č. 4 (2012), s. 692-700 ISSN 0956-053X Grant - others:RFCR(XE) CT-2010-00009 Institutional research plan: CEZ:AV0Z40720504 Keywords : waste biomass * gasification * tar Subject RIV: JE - Non-nuclear Energetics, Energy Consumption ; Use Impact factor: 2.485, year: 2012

  3. For Sale: Nuclear Waste Sites--Anyone Buying?

    Science.gov (United States)

    Hancock, Don

    1992-01-01

    Explores why the United States Nuclear Waste Program has been unable to find a volunteer state to host either a nuclear waste repository or monitored retrieval storage facility. Discusses the Department of Energy's plans for Nevada's Yucca Mountain as a repository and state and tribal responses to the plan. (21 references) (MCO)

  4. Project of the century. Nuclear waste disposal; Jahrhundertprojekt Endlagerung

    Energy Technology Data Exchange (ETDEWEB)

    Brunnengraeber, Achim [Freie Univ. Berlin (Germany). Forschungszentrum fuer Umweltpolitik (FFU)

    2017-09-01

    In Germany - as worldwide - no final repository for radioactive wastes from nuclear power plants exists. The interdisciplinary contribution is focused on the question how the new political developments based on the work of the final repository commission will proceed with respect to the site selection. Possible challenges arising on the way to final waste disposal are discussed.

  5. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations. (DLC)

  6. A Generic Safety Assessment Model for a Trench Type LILW Repository

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn-Myoung; Choi, Hee-Joo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    This program is ready for a total system performance assessment and is able to deterministically and probabilistically evaluate the nuclide release from a repository and farther transport into the geosphere and biosphere under various normal circumstances, disruptive events, and scenarios that can occur after a failure of waste packages with associated uncertainty. Despite the conceptual design of a trench type LILW repository system, all parameter values associated with the repository system were assumed for the time being, and the generic model developed through this study should be helpful because the evaluation of such releases is very important. A simple and effective model for a safety assessment of a conceptual trench repository system, in which an LILW that arises from a nuclear power plant and other sources, has been developed. The computer program based on this model has also been developed as a GoldSim template using the commercial GoldSim development tool.

  7. Normal scenario development on the radionuclide release and its transfer and transport from a repository

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyung Chul; Lee, Myoung Youn; Hwang, Soo Yong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-06-15

    Scenarios by which safety and performance analyses can be made have been developed for low- and intermediate level radioactive waste repository system with identifying various Features, Events, and Processes (FEPs) involved nuclide release from the repository. To this end Sandia methodology for scenario development which has been worldwide adopted in many countries was reviewed. Generally speaking, nuclides released from the repository located near ocean are apt to reach to such surface water bodies as well and river or sea water where to the large extent the mixing process takes place resulting comparatively low activity concentration. For typical reference repository in such case, which is commonly expected in Korea in view of domestic environment, 11 normal and accident scenarios for the postclosure period have been identified. For each scenario some conceptual and mathematical models by which the modeling methodologies co