Sample records for waste classification tracking

  1. Classification of waste packages

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, H.P.; Sauer, M.; Rojahn, T. [Versuchsatomkraftwerk GmbH, Kahl am Main (Germany)


    A barrel gamma scanning unit has been in use at the VAK for the classification of radioactive waste materials since 1998. The unit provides the facility operator with the data required for classification of waste barrels. Once these data have been entered into the AVK data processing system, the radiological status of raw waste as well as pre-treated and processed waste can be tracked from the point of origin to the point at which the waste is delivered to a final storage. Since the barrel gamma scanning unit was commissioned in 1998, approximately 900 barrels have been measured and the relevant data required for classification collected and analyzed. Based on the positive results of experience in the use of the mobile barrel gamma scanning unit, the VAK now offers the classification of barrels as a service to external users. Depending upon waste quantity accumulation, this measurement unit offers facility operators a reliable and time-saving and cost-effective means of identifying and documenting the radioactivity inventory of barrels scheduled for final storage. (orig.)

  2. Tissue Tracking: Applications for Brain MRI Classification (United States)


    previous work on Bayesian classification algorithms. First, we present work by Haker et al.4 which outlines the general structure of Bayesian...groups have previously proposed Bayesian classification algorithms. Most relevant to our work is the work by Haker et al. on the tracking of objects in 2D...Segmentation,” Massachusetts Institute of Technology , 1999. 4. S. Haker , G. Sapiro, and A. Tannenbaum, “Knowledge-based segmentation of SAR data with

  3. Track classification within wireless sensor network (United States)

    Doumerc, Robin; Pannetier, Benjamin; Moras, Julien; Dezert, Jean; Canevet, Loic


    In this paper, we present our study on track classification by taking into account environmental information and target estimated states. The tracker uses several motion model adapted to different target dynamics (pedestrian, ground vehicle and SUAV, i.e. small unmanned aerial vehicle) and works in centralized architecture. The main idea is to explore both: classification given by heterogeneous sensors and classification obtained with our fusion module. The fusion module, presented in his paper, provides a class on each track according to track location, velocity and associated uncertainty. To model the likelihood on each class, a fuzzy approach is used considering constraints on target capability to move in the environment. Then the evidential reasoning approach based on Dempster-Shafer Theory (DST) is used to perform a time integration of this classifier output. The fusion rules are tested and compared on real data obtained with our wireless sensor network.In order to handle realistic ground target tracking scenarios, we use an autonomous smart computer deposited in the surveillance area. After the calibration step of the heterogeneous sensor network, our system is able to handle real data from a wireless ground sensor network. The performance of this system is evaluated in a real exercise for intelligence operation ("hunter hunt" scenario).

  4. Thermal bioaerosol cloud tracking with Bayesian classification (United States)

    Smith, Christian W.; Dupuis, Julia R.; Schundler, Elizabeth C.; Marinelli, William J.


    The development of a wide area, bioaerosol early warning capability employing existing uncooled thermal imaging systems used for persistent perimeter surveillance is discussed. The capability exploits thermal imagers with other available data streams including meteorological data and employs a recursive Bayesian classifier to detect, track, and classify observed thermal objects with attributes consistent with a bioaerosol plume. Target detection is achieved based on similarity to a phenomenological model which predicts the scene-dependent thermal signature of bioaerosol plumes. Change detection in thermal sensor data is combined with local meteorological data to locate targets with the appropriate thermal characteristics. Target motion is tracked utilizing a Kalman filter and nearly constant velocity motion model for cloud state estimation. Track management is performed using a logic-based upkeep system, and data association is accomplished using a combinatorial optimization technique. Bioaerosol threat classification is determined using a recursive Bayesian classifier to quantify the threat probability of each tracked object. The classifier can accept additional inputs from visible imagers, acoustic sensors, and point biological sensors to improve classification confidence. This capability was successfully demonstrated for bioaerosol simulant releases during field testing at Dugway Proving Grounds. Standoff detection at a range of 700m was achieved for as little as 500g of anthrax simulant. Developmental test results will be reviewed for a range of simulant releases, and future development and transition plans for the bioaerosol early warning platform will be discussed.

  5. Classification of dimension stone wastes. (United States)

    Karaca, Zeki; Pekin, Abdülkerim; Deliormanlı, Ahmet Hamdi


    For countries in which the stone industry is well developed, opposition to quarry and plant waste is gradually increasing. The primary step for waste control and environmental management is to define the problem of concern. In this study, natural building stone wastes were classified for the first time in the literature. Following on-site physical observations and research at more than 50 quarries and 20 plants, stone wastes were classified as (1) solid, (2) dust and (3) semi-slurry, slurry and cake. As a result of this study, the characteristics of wastes, their main environmental threats and the industries in which wastes could be used were defined for each group.

  6. Integrated tracking, classification, and sensor management theory and applications

    CERN Document Server

    Krishnamurthy, Vikram; Vo, Ba-Ngu


    A unique guide to the state of the art of tracking, classification, and sensor management. This book addresses the tremendous progress made over the last few decades in algorithm development and mathematical analysis for filtering, multi-target multi-sensor tracking, sensor management and control, and target classification. It provides for the first time an integrated treatment of these advanced topics, complete with careful mathematical formulation, clear description of the theory, and real-world applications. Written by experts in the field, Integrated Tracking, Classification, and Sensor Management provides readers with easy access to key Bayesian modeling and filtering methods, multi-target tracking approaches, target classification procedures, and large scale sensor management problem-solving techniques.


    Directory of Open Access Journals (Sweden)

    Burcea Stefan Gabriel


    Full Text Available The waste management specialist must be able to identify and analyze waste generation sources and to propose proper solutions to prevent the waste generation and encurage the waste minimisation. In certain situations like implementing an integrated waste management sustem and configure the waste collection methods and capacities, practitioners can face the challenge to classify the generated waste. This will tend to be the more demanding as the literature does not provide a coherent system of criteria required for an objective waste classification process. The waste incineration will determine no doubt a different waste classification than waste composting or mechanical and biological treatment. In this case the main question is what are the proper classification criteria witch can be used to realise an objective waste classification? The article provide a short critical literature review of the existing waste classification criteria and suggests the conclusion that the literature can not provide unitary waste classification system which is unanimously accepted and assumed by ideologists and practitioners. There are various classification criteria and more interesting perspectives in the literature regarding the waste classification, but the most common criteria based on which specialists classify waste into several classes, categories and types are the generation source, physical and chemical features, aggregation state, origin or derivation, hazardous degree etc. The traditional classification criteria divided waste into various categories, subcategories and types; such an approach is a conjectural one because is inevitable that according to the context in which the waste classification is required the used criteria to differ significantly; hence the need to uniformizating the waste classification systems. For the first part of the article it has been used indirect observation research method by analyzing the literature and the various

  8. 40 CFR 273.39 - Tracking universal waste shipments. (United States)


    .... The record may take the form of a log, invoice, manifest, bill of lading, or other shipping document..., bill of lading or other shipping document. The record for each shipment of universal waste sent must... Universal Waste § 273.39 Tracking universal waste shipments. (a) Receipt of shipments. A large quantity...

  9. A stream-based classification of European cyclone tracks (United States)

    Hofstätter, Michael; Chimani, Barbara; Steinacker, Reinhold; Blöschl, Günther


    The geographical region from where a cyclone enters Europe appears to play an important role in generating certain weather extremes. Some of the most devastating European floods have been associated with type Vb cyclones as in August 2002 or June 2013 for example. On the other hand, gale force storms in Western-Continental Europe are usually caused by cyclones that propagate from the north-eastern Atlantic into Europe. A method is presented for tracking the paths of atmospheric cyclones with the ability to detect both linear and branching tracks. Cyclones are tracked at three atmospheric levels independently using the reanalysis data of NCEP1, ERA-40 and ERA-Interim over Europe in parts of the period 1948-2012. The cyclones are then classified by a new stream-based classification approach into nine types, on the basis of the geographic regions from where cyclones enter Central Europe. Results show that the total number of tracks identified from ERA-40 is about 25% larger than those from NCEP1 due to the higher spatial resolution. The ERA-40 data suggest that, at 700hPa, 80% of all tracks are linear as compared to 65% at sea level pressure (SLP) due to the smoother pressure patterns at higher atmospheric levels. So branching events are more frequent at the surface. The relative number of linear tracks is always largest in the data with the coarsest resolution at all levels. The classification indicates that the proportion of linear and branching tracks varies substantially between cyclone types. For example, the famous cyclone track type Vb has the highest ratio of complex (compound and merge/split) tracks with only 1/3 of linear cases at SLP (ERA-40). The new cyclone type catalogue established in this paper will be used for identifying the temporal behaviour of cyclone tracks in the context of changing weather extremes in Central Europe.

  10. Classification of Birds and Bats Using Flight Tracks

    Energy Technology Data Exchange (ETDEWEB)

    Cullinan, Valerie I.; Matzner, Shari; Duberstein, Corey A.


    Classification of birds and bats that use areas targeted for offshore wind farm development and the inference of their behavior is essential to evaluating the potential effects of development. The current approach to assessing the number and distribution of birds at sea involves transect surveys using trained individuals in boats or airplanes or using high-resolution imagery. These approaches are costly and have safety concerns. Based on a limited annotated library extracted from a single-camera thermal video, we provide a framework for building models that classify birds and bats and their associated behaviors. As an example, we developed a discriminant model for theoretical flight paths and applied it to data (N = 64 tracks) extracted from 5-min video clips. The agreement between model- and observer-classified path types was initially only 41%, but it increased to 73% when small-scale jitter was censored and path types were combined. Classification of 46 tracks of bats, swallows, gulls, and terns on average was 82% accurate, based on a jackknife cross-validation. Model classification of bats and terns (N = 4 and 2, respectively) was 94% and 91% correct, respectively; however, the variance associated with the tracks from these targets is poorly estimated. Model classification of gulls and swallows (N ≥ 18) was on average 73% and 85% correct, respectively. The models developed here should be considered preliminary because they are based on a small data set both in terms of the numbers of species and the identified flight tracks. Future classification models would be greatly improved by including a measure of distance between the camera and the target.

  11. Climatology and classification of spring Saharan cyclone tracks

    Energy Technology Data Exchange (ETDEWEB)

    Hannachi, A. [Reading University, Department of Meteorology, PO Box 243, Reading (United Kingdom); Awad, A. [King Abdulaziz University, Department of Meteorology, Jeddah (Saudi Arabia); Ammar, K. [Meteorological Authority, Department of Research, Cairo (Egypt)


    Spring Saharan cyclones constitute a dominant feature of the not-well-explored Saharan region. In this manuscript, a climatological analysis and classification of Saharan cyclone tracks are presented using 6-hourly NCEP/NCAR sea level pressure (SLP) reanalyses over the Sahara (10 W-50 E, 20 N-50 N) for the Spring (March-April-May) season over the period 1958-2006. A simple tracking procedure based on following SLP minima is used to construct around 640 Spring Saharan cyclone tracks. Saharan cyclones are found to be short-lived compared to their extratropical counterparts with an e-folding time of about 3 days. The lee side of the west Atlas mountain is found to be the main cyclogenetic region for Spring Saharan cyclones. Central Iraq is identified as the main cyclolytic area. A subjective procedure is used next to classify the cyclone tracks where six clusters are identified. Among these clusters the Western Atlas-Asia Minor is the largest and most stretched, whereas Algerian Sahara-Asia Minor is composed of the most long-lived tracks. Upper level flow associated with the tracks has also been examined and the role of large scale baroclinicity in the growth of Saharan cyclones is discussed. (orig.)

  12. 10 CFR 61.55 - Waste classification. (United States)


    ... shorter-lived precursors) whose potential hazard will persist long after such precautions as institutional... requirements on institutional controls, waste form, and disposal methods are effective. (2) Classes of waste... disposed of in a geologic repository as defined in part 60 or 63 of this chapter unless proposals for...


    Directory of Open Access Journals (Sweden)

    S. L. Rovin


    Full Text Available Has been classified and investigated the composition and properties of particulate iron-containing waste and the possibility of their processing and return to the industry. Describes the capabilities and prospects of recycling of particulate wastes in tilting rotary furnaces (TRF without preprocessing

  14. The Future of Hazardous Waste Tracking: Radio Frequency Identification (RFID) (United States)

    The capability and performance of various RFID technologies to track hazardous wastes and materials (HAZMAT) across international borders will be verified in the El Paso, Texas-Ciudad Juarez, Mexico area under EPA's Environmental Technology Verification (ETV)/Environmental and S...

  15. Solid Waste Information and Tracking System (SWITS) Software Requirements Specification

    Energy Technology Data Exchange (ETDEWEB)

    MAY, D.L.


    This document is the primary document establishing requirements for the Solid Waste Information and Tracking System (SWITS) as it is converted to a client-server architecture. The purpose is to provide the customer and the performing organizations with the requirements for the SWITS in the new environment. This Software Requirement Specification (SRS) describes the system requirements for the SWITS Project, and follows the PHMC Engineering Requirements, HNF-PRO-1819, and Computer Software Qualify Assurance Requirements, HNF-PRO-309, policies. This SRS includes sections on general description, specific requirements, references, appendices, and index. The SWITS system defined in this document stores information about the solid waste inventory on the Hanford site. Waste is tracked as it is generated, analyzed, shipped, stored, and treated. In addition to inventory reports a number of reports for regulatory agencies are produced.

  16. Collection and Segregation of Radioactive Waste. Principals for Characterization and Classification of Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    Dziewinska, K.M.


    Radioactive wastes are generated by all activities which utilize radioactive materials as part of their processes. Generally such activities include all steps in the nuclear fuel cycle (for power generation) and non-fuel cycle activities. The increasing production of radioisotopes in a Member State without nuclear power must be accompanied by a corresponding development of a waste management system. An overall waste management scheme consists of the following steps: segregation, minimization, treatment, conditioning, storage, transport, and disposal. To achieve a satisfactory overall management strategy, all steps have to be complementary and compatible. Waste segregation and minimization are of great importance mainly because they lead to cost reduction and reduction of dose commitments to the personnel that handle the waste. Waste characterization plays a significant part in the waste segregation and waste classification processes, it implicates required waste treatment process including the need for the safety assessment of treatment conditioning and storage facilities.

  17. Approach for enhancing nuclear materials tracking and reporting in waste

    Energy Technology Data Exchange (ETDEWEB)

    Longmire, V. L. (Victoria L.); Seitz, S. L. (Sharon L.); Sinkule, B. J. (Barbara J.)


    Recent policy from the Department of Energy/Office of Safeguards and Security (DOE/OSS) has identified the need to report nuclear materials in waste in a manner that is consistent with the Department of Energy's Nuclear Materials Information System (NMIS), which uses Form 471 as its official record. NMIS is used to track nuclear material inventories while they are subject to safeguards. This requirement necessitates the reevaluation of existing business practices that are used to track and report these nuclear materials. This paper provides a methodology for applying a systems approach to the evaluation of the flow of nuclear waste materials from a generating facility through to permanent disposal. This methodology can be used to integrate existing systems and leverage data already gathered that support both the waste reporting requirements and the NMIS requirements. In order to consider an active waste reporting system that covers waste management through to final disposal, the requirements for characterization, certification, and transportation for disposal at the Waste Isolation Pilot Plant (WIPP) are used as an example. These requirements are found in the WIPP Waste Acceptance Criteria (WIPP/WAC) and associated requirement documents. This approach will prevent inconsistencies in reported data and address current and future needs. For example, spent fuel (which the U.S. intends to dispose of as high-level waste) has not been viewed as particularly attractive in terms of proliferation in comparison to materials associated with other parts of the nuclear fuel cycle. However, collecting high-level waste (or some types of defense waste) in one location where it will be left for hundreds or thousands of years presents proliferation and safeguards issues that need to be considered as part of a systems evaluation. This paper brings together information on domestic and international safeguards practices and considers the current system of documentation used by the

  18. Waste manifesting and tracking: compliance monitoring and enforcement

    Energy Technology Data Exchange (ETDEWEB)

    Bures, M.A. [M.A. Bures Consulting, Calgary, AB (Canada)


    An overview of Alberta`s new approach to compliance and enforcement activities for oilfield waste manifesting and tracking was presented. The Energy and Utilities Board`s (EUB`s) current compliance model includes a surveillance process which places a lot of emphasis on improving the performance of problem operators and high risk operators. It also includes an enforcement policy which outlines well defined expectations and escalating consequences. These `enforcement ladders` generally consist of at least four levels. Levels one and two are considered relatively minor offences, but levels three and higher are quite serious and the consequences of non-compliance far more expensive. The priority areas for surveillance and compliance monitoring of oilfield waste include: (1) waste receivers, (2) proper characterization of oilfield waste to ensure appropriate disposal, (3) the verification that oilfield waste is disposed at appropriate facilities, and (4) ensuring that dangerous oilfield wastes go to approved facilities. The new compliance model is an approved EUB policy and is gradually being implemented across the province. 6 refs., 1 fig.

  19. The Integrated Waste Tracking Systems (IWTS) - A Comprehensive Waste Management Tool

    Energy Technology Data Exchange (ETDEWEB)

    Robert S. Anderson


    The US Department of Energy (DOE) Idaho National Laboratory (INL) site located near Idaho Falls, ID USA, has developed a comprehensive waste management and tracking tool that integrates multiple operational activities with characterization data from waste declaration through final waste disposition. The Integrated Waste Tracking System (IWTS) provides information necessary to help facility personnel properly manage their waste and demonstrate a wide range of legal and regulatory compliance. As a client?server database system, the IWTS is a proven tracking, characterization, compliance, and reporting tool that meets the needs of both operations and management while providing a high level of flexibility. This paper describes some of the history involved with the development and current use of IWTS as a comprehensive waste management tool as well as a discussion of IWTS deployments performed by the INL for outside clients. Waste management spans a wide range of activities including: work group interactions, regulatory compliance management, reporting, procedure management, and similar activities. The IWTS documents these activities and performs tasks in a computer-automated environment. Waste characterization data, container characterization data, shipments, waste processing, disposals, reporting, and limit compliance checks are just a few of the items that IWTS documents and performs to help waste management personnel perform their jobs. Throughout most hazardous and radioactive waste generating, storage and disposal sites, waste management is performed by many different groups of people in many facilities. Several organizations administer their areas of waste management using their own procedures and documentation independent of other organizations. Files are kept, some of which are treated as quality records, others not as stringent. Quality records maintain a history of: changes performed after approval, the reason for the change(s), and a record of whom and when

  20. The Constitution, waste facility performance standards, and radioactive waste classification: Is equal protection possible?

    Energy Technology Data Exchange (ETDEWEB)

    Eye, R.V. [Kansas Dept. of Health and Environment, Topeka, KS (United States)


    The process for disposal of so-called low-level radioactive waste is deadlocked at present. Supporters of the proposed near-surface facilities assert that their designs will meet minimum legal and regulatory standards currently in effect. Among opponents there is an overarching concern that the proposed waste management facilities will not isolate radiation from the biosphere for an adequate length of time. This clash between legal acceptability and a perceived need to protect the environment and public health by requiring more than the law demand sis one of the underlying reasons why the process is deadlocked. Perhaps the most exhaustive public hearing yet conducted on low-level radioactive waste management has recently concluded in Illinois. The Illinois Low-Level Radioactive Waste Disposal Facility Sitting Commission conducted 71 days of fact-finding hearings on the safety and suitability of a site near Martinsville, Illinois, to serve as a location for disposition of low-level radioactive waste. Ultimately, the siting commission rejected the proposed facility site for several reasons. However, almost all the reasons were related, to the prospect that, as currently conceived, the concrete barrier/shallow-land burial method will not isolate radioactive waste from the biosphere. This paper reviews the relevant legal framework of the radioactive waste classification system and will argue that it is inadequate for long-lived radionuclides. Next, the paper will present a case for altering the classification system based on high-level waste regulatory considerations.

  1. [Biological, chemical, and radiation factors in the classification of medical waste]. (United States)

    Rusakov, N V; Korotkova, G I; Orlov, A Iu; Kadyrov, D E


    The current classification of medical waste does not consider the sanitary-and-chemical hazard of epidemiologically dangerous and extremely dangerous medical waste (classes B and C). According to the results of the studies performed, the authors propose the improved classification of medical waste, which makes it possible to take into account not only infectious, radiation, and toxicological, but also sanitary-and-chemical hazards (toxicity, carcinogenicity, mutagenicity, and biological activity) of medical waste.

  2. Performance assessment requirements for the identification and tracking of transuranic waste intended for disposal at the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Snider, C.A. [Department of Energy, Carlsbad, NM (United States); Weston, W.W. [Westinghouse Electric Corp., Carlsbad, NM (United States)


    To demonstrate compliance with environmental radiation protection standards for management and disposal of transuranic (TRU) radioactive wastes, a performance assessment (PA) of the Waste Isolation Pilot Plant (WIPP) was made of waste-waste and waste-repository interactions and impacts on disposal system performance. An estimate of waste components and accumulated quantities was derived from a roll-up of the generator/storage sites` TRU waste inventories. Waste components of significance, and some of negligible effect, were fixed input parameters in the model. The results identified several waste components that require identification and tracking of quantities to ensure that repository limits are not exceeded. The rationale used to establish waste component limits based on input estimates is discussed. The distinction between repository limits and waste container limits is explained. Controls used to ensure that no limits are exceeded are identified. For waste components with no explicit repository based limits, other applicable limits are contained in the WIPP Waste Acceptance Criteria (WAC). The 10 radionuclides targeted for identification and tracking on either a waste container or a waste stream basis include Am-241, Pu-238, Pu-239, Pu-240, Pu-242, U-233, U-234, U-238, Sr-90, and Cs-137. The accumulative activities of these radionuclides are to be inventoried at the time of emplacement in the WIPP. Changes in inventory curie content as a function of radionuclide decay and ingrowth over time will be calculated and tracked. Due to the large margin of compliance demonstrated by PA with the 10,000 year release limits specified, the quality assurance objective for radioassay of the 10 radionuclides need to be no more restrictive than those already identified for addressing the requirements imposed by transportation and WIPP disposal operations in Section 9 of the TRU Waste Characterization Quality Assurance Program Plan. 6 refs.

  3. Installing and Commissioning a New Radioactive Waste Tracking System - Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Robert S. Anderson; Miklos Garamszeghy; Fred Rodrigues; Ed Nicholls


    Ontario Power Generation (OPG) recognizes the importance of information management particularly with regards to its low and intermediate level waste program. Various computer based waste tracking systems have been used in OPG since the 1980s. These systems tracked the physical receipt, processing, storage, and inventory of the waste. As OPG moved towards long-term management (e.g. disposal), it was recognized that tracking of more detailed waste characterization information was important. This required either substantial modification of the existing system to include a waste characterization module or replacing it entirely with a new system. After a detailed review of available options, it was decided that the existing waste tracking application would be replaced with the Idaho National Laboratory’s (INL) Integrated Waste Tracking System (IWTS). Installing and commissioning a system which must receive historical operational waste management information (data) and provide new features, required much more attention than was originally considered. The operational readiness of IWTS required extensive vetting and preparation of historic data (which itself had been created from multiple databases in varied formats) to ensure a consistent format for import of some 30,000-container records, and merging and linking these container records to a waste stream based characterization database. This paper will discuss some of the strengths and weaknesses contributing to project success or hindrance so that others can understand and minimize the difficulties inherent in a project of this magnitude.

  4. Historical literature review on waste classification and categorization

    Energy Technology Data Exchange (ETDEWEB)

    Croff, A.G.; Richmond, A.A.; Williams, J.P.


    The Staff of the Waste Management Document Library (WMDL), in cooperation with Allen Croff have been requested to provide information support for a historical search concerning waste categorization/classification. This bibliography has been compiled under the sponsorship of Oak Ridge National Laboratory`s Chemical Technology Division to help in Allen`s ongoing committee work with the NRC/NRCP. After examining the search, Allen Croff saw the value of the search being published. Permission was sought from the database providers to allow limited publication (i.e. 20--50 copies) of the search for internal distribution at the Oak Ridge National Laboratory and for Allen Croff`s associated committee. Citations from the database providers who did not grant legal permission for their material to be published have been omitted from the literature review. Some of the longer citations have been included in an abbreviated form in the search to allow the format of the published document to be shortened from approximately 1,400 pages. The bibliography contains 372 citations.

  5. Interim report to the Nuclear Regulatory Commission on radioactive waste classification

    Energy Technology Data Exchange (ETDEWEB)

    King, W.C.; Cohen, J.J.


    The Lawrence Livermore Laboratory assisted the Nuclear Regulatory Commission in the development of a radioactive waste classification system that will satisfy technical, environmental, and societal concerns. This is an interim report to the NRC on work accomplished to date. It describes a proposed waste-classification system that is based on the final disposition of waste material. The system consists of three classes of radioactive waste. The classification of any radioactive waste will depend primarily on its hazard potential. Other characteristics such as longevity (half-size) will be considered also. The levels of hazard that differentiate the three classes of radioactive waste will be determined by ongoing work. This report describes other work to be completed before a suitable radioactive waste-classificaion system is established.

  6. 40 CFR 273.62 - Tracking universal waste shipments. (United States)


    ..., invoice, manifest, bill of lading, or other shipping document. The record for each shipment of universal... receipt of the shipment of universal waste. (b) The owner or operator of a destination facility must... receipt of a shipment of universal waste. ...

  7. Model tracking system for low-level radioactive waste disposal facilities: License application interrogatories and responses

    Energy Technology Data Exchange (ETDEWEB)

    Benbennick, M.E.; Broton, M.S.; Fuoto, J.S.; Novgrod, R.L.


    This report describes a model tracking system for a low-level radioactive waste (LLW) disposal facility license application. In particular, the model tracks interrogatories (questions, requests for information, comments) and responses. A set of requirements and desired features for the model tracking system was developed, including required structure and computer screens. Nine tracking systems were then reviewed against the model system requirements and only two were found to meet all requirements. Using Kepner-Tregoe decision analysis, a model tracking system was selected.

  8. Pulsed-flow air classification for waste to energy production. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peirce, J.J.; Vesilind, P.A.


    The development and testing of pulsed-flow air classification for waste-to-energy production are discussed. Standard designs generally permit large amounts of combustible material to escape as reject while producing a fuel that is high in metal and glass contaminants. Pulsed-flow classification is presented as a concept which can avoid both pitfalls. Each aspect of theory and laboratory testing is summarized: particle characteristics, theory of pulsed-flow classification, laboratory testing, and pulsed-flow air classification for waste-to-energy production. Conclusions from the research are summarized.

  9. An eye tracking study of bloodstain pattern analysts during pattern classification. (United States)

    Arthur, R M; Hoogenboom, J; Green, R D; Taylor, M C; de Bruin, K G


    Bloodstain pattern analysis (BPA) is the forensic discipline concerned with the classification and interpretation of bloodstains and bloodstain patterns at the crime scene. At present, it is unclear exactly which stain or pattern properties and their associated values are most relevant to analysts when classifying a bloodstain pattern. Eye tracking technology has been widely used to investigate human perception and cognition. Its application to forensics, however, is limited. This is the first study to use eye tracking as a tool for gaining access to the mindset of the bloodstain pattern expert. An eye tracking method was used to follow the gaze of 24 bloodstain pattern analysts during an assigned task of classifying a laboratory-generated test bloodstain pattern. With the aid of an automated image-processing methodology, the properties of selected features of the pattern were quantified leading to the delineation of areas of interest (AOIs). Eye tracking data were collected for each AOI and combined with verbal statements made by analysts after the classification task to determine the critical range of values for relevant diagnostic features. Eye-tracking data indicated that there were four main regions of the pattern that analysts were most interested in. Within each region, individual elements or groups of elements that exhibited features associated with directionality, size, colour and shape appeared to capture the most interest of analysts during the classification task. The study showed that the eye movements of trained bloodstain pattern experts and their verbal descriptions of a pattern were well correlated.

  10. Canine scent detection and microbial source tracking of human waste contamination in storm drains. (United States)

    Van De Werfhorst, Laurie C; Murray, Jill L S; Reynolds, Scott; Reynolds, Karen; Holden, Patricia A


    Human fecal contamination of surface waters and drains is difficult to diagnose. DNA-based and chemical analyses of water samples can be used to specifically quantify human waste contamination, but their expense precludes routine use. We evaluated canine scent tracking, using two dogs trained to respond to the scent of municipal wastewater, as a field approach for surveying human fecal contamination. Fecal indicator bacteria, as well as DNA-based and chemical markers of human waste, were analyzed in waters sampled from canine scent-evaluated sites (urban storm drains and creeks). In the field, the dogs responded positively (70% and 100%) at sites for which sampled waters were then confirmed as contaminated with human waste. When both dogs indicated a negative response, human waste markers were absent. Overall, canine scent tracking appears useful for prioritizing sampling sites for which DNA-based and similarly expensive assays can confirm and quantify human waste contamination.

  11. Classification of team sport activities using a single wearable tracking device. (United States)

    Wundersitz, Daniel W T; Josman, Casey; Gupta, Ritu; Netto, Kevin J; Gastin, Paul B; Robertson, Sam


    Wearable tracking devices incorporating accelerometers and gyroscopes are increasingly being used for activity analysis in sports. However, minimal research exists relating to their ability to classify common activities. The purpose of this study was to determine whether data obtained from a single wearable tracking device can be used to classify team sport-related activities. Seventy-six non-elite sporting participants were tested during a simulated team sport circuit (involving stationary, walking, jogging, running, changing direction, counter-movement jumping, jumping for distance and tackling activities) in a laboratory setting. A MinimaxX S4 wearable tracking device was worn below the neck, in-line and dorsal to the first to fifth thoracic vertebrae of the spine, with tri-axial accelerometer and gyroscope data collected at 100Hz. Multiple time domain, frequency domain and custom features were extracted from each sensor using 0.5, 1.0, and 1.5s movement capture durations. Features were further screened using a combination of ANOVA and Lasso methods. Relevant features were used to classify the eight activities performed using the Random Forest (RF), Support Vector Machine (SVM) and Logistic Model Tree (LMT) algorithms. The LMT (79-92% classification accuracy) outperformed RF (32-43%) and SVM algorithms (27-40%), obtaining strongest performance using the full model (accelerometer and gyroscope inputs). Processing time can be reduced through feature selection methods (range 1.5-30.2%), however a trade-off exists between classification accuracy and processing time. Movement capture duration also had little impact on classification accuracy or processing time. In sporting scenarios where wearable tracking devices are employed, it is both possible and feasible to accurately classify team sport-related activities. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. ERM 593 Applied Project_Guidance for Reviewing and Approving a Waste Stream Profile in the Waste Compliance and Tracking System_Final_05-05-15

    Energy Technology Data Exchange (ETDEWEB)

    Elicio, Andy U. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    My ERM 593 applied project will provide guidance for the Los Alamos National Laboratory Waste Stream Profile reviewer (i.e. RCRA reviewer) in regards to Reviewing and Approving a Waste Stream Profile in the Waste Compliance and Tracking System. The Waste Compliance and Tracking system is called WCATS. WCATS is a web-based application that “supports the generation, characterization, processing and shipment of LANL radioactive, hazardous, and industrial waste.” The LANL generator must characterize their waste via electronically by filling out a waste stream profile (WSP) in WCATS. Once this process is completed, the designated waste management coordinator (WMC) will perform a review of the waste stream profile to ensure the generator has completed their waste stream characterization in accordance with applicable state, federal and LANL directives particularly P930-1, “LANL Waste Acceptance Criteria,” and the “Waste Compliance and Tracking System User's Manual, MAN-5004, R2,” as applicable. My guidance/applied project will describe the purpose, scope, acronyms, definitions, responsibilities, assumptions and guidance for the WSP reviewer as it pertains to each panel and subpanel of a waste stream profile.

  13. Feathered Detectives: Real-Time GPS Tracking of Scavenging Gulls Pinpoints Illegal Waste Dumping. (United States)

    Navarro, Joan; Grémillet, David; Afán, Isabel; Ramírez, Francisco; Bouten, Willem; Forero, Manuela G


    Urban waste impacts human and environmental health, and waste management has become one of the major challenges of humanity. Concurrently with new directives due to manage this human by-product, illegal dumping has become one of the most lucrative activities of organized crime. Beyond economic fraud, illegal waste disposal strongly enhances uncontrolled dissemination of human pathogens, pollutants and invasive species. Here, we demonstrate the potential of novel real-time GPS tracking of scavenging species to detect environmental crime. Specifically, we were able to detect illegal activities at an officially closed dump, which was visited recurrently by 5 of 19 GPS-tracked yellow-legged gulls (Larus michahellis). In comparison with conventional land-based surveys, GPS tracking allows a much wider and cost-efficient spatiotemporal coverage, even of the most hazardous sites, while GPS data accessibility through the internet enables rapid intervention. Our results suggest that multi-species guilds of feathered detectives equipped with GPS and cameras could help fight illegal dumping at continental scales. We encourage further experimental studies, to infer waste detection thresholds in gulls and other scavenging species exploiting human waste dumps.

  14. Feathered Detectives: Real-Time GPS Tracking of Scavenging Gulls Pinpoints Illegal Waste Dumping.

    Directory of Open Access Journals (Sweden)

    Joan Navarro

    Full Text Available Urban waste impacts human and environmental health, and waste management has become one of the major challenges of humanity. Concurrently with new directives due to manage this human by-product, illegal dumping has become one of the most lucrative activities of organized crime. Beyond economic fraud, illegal waste disposal strongly enhances uncontrolled dissemination of human pathogens, pollutants and invasive species. Here, we demonstrate the potential of novel real-time GPS tracking of scavenging species to detect environmental crime. Specifically, we were able to detect illegal activities at an officially closed dump, which was visited recurrently by 5 of 19 GPS-tracked yellow-legged gulls (Larus michahellis. In comparison with conventional land-based surveys, GPS tracking allows a much wider and cost-efficient spatiotemporal coverage, even of the most hazardous sites, while GPS data accessibility through the internet enables rapid intervention. Our results suggest that multi-species guilds of feathered detectives equipped with GPS and cameras could help fight illegal dumping at continental scales. We encourage further experimental studies, to infer waste detection thresholds in gulls and other scavenging species exploiting human waste dumps.

  15. A wireless sensor network design and implementation for vehicle detection, classification, and tracking (United States)

    Aljaafreh, A.; Al Assaf, A.


    Vehicle intrusion is considered a significant threat for critical zones specially the militarized zones and therefore vehicles monitoring has a great importance. In this paper a small wireless sensor network for vehicle intrusion monitoring consists of a five inexpensive sensor nodes distributed over a small area and connected with a gateway using star topology has been designed and implemented. The system is able to detect a passage of an intrusive vehicle, classify it either wheeled or tracked, and track the direction of its movement. The approach is based on Vehicle's ground vibrations for detection, vehicle's acoustic signature for classification and the Energy- based target localization for tracking. Detection and classification are implemented by using different algorithms and techniques including Analog to Digital Conversion, Fast Fourier Transformation (FFT) and Neural Network .All of these algorithms and techniques are implemented locally in the sensor node using Microchip dsPIC digital signal controller. Results are sent from the sensor node to the gateway using ZigBee technology and then from the gateway to a web server using GPRS technology.

  16. Optimum municipal solid waste collection using geographical information system (GIS) and vehicle tracking for Pallavapuram municipality. (United States)

    Kanchanabhan, T E; Abbas Mohaideen, J; Srinivasan, S; Sundaram, V Lenin Kalyana


    Waste collection and transportation is the contact point between waste generators and waste management systems. A proposal for an innovative model for the collection and transportation of municipal solid waste (MSW) which is a part of a solid waste management system using a spatial geo database, integrated in a geographical information system (GIS) environment is presented. Pallavapuram is a fast-developing municipality of Chennai city in the southern suburbs about 20 km from Chennai, the state capital of Tamil Nadu in India. The disposal of MSW was previously occurring in an indiscriminate and irrational manner in the municipality. Hence in the present study an attempt was made to develop an engineered design of solid waste collection using GIS with a vehicle tracking system and final disposal by composting with investment costs. The GIS was used to analyse existing maps and data, to digitize the existing ward boundaries and to enter data about the wards and disposal sites. The proposed GIS model for solid waste disposal would give information on the planning of bins, vehicles and the optimal route. In the case of disposal, composting would be a successful strategy to accelerate the decomposition and stabilization of the biodegradable components of waste in MSW.

  17. A new classification scheme of European cyclone tracks with relevance to precipitation (United States)

    Hofstätter, M.; Chimani, B.; Lexer, A.; Blöschl, G.


    This paper proposes a new classification scheme of atmospheric cyclone tracks over Europe. The cyclones are classified into nine types, based on the geographic regions, the cyclones traverse before entering central Europe. The method is applied to ERA-40 data for 1961-2002, considering all significant cyclones above a relative vorticity threshold. About 120 and 80 cyclone tracks per year are identified at sea level pressure and 700 hPa geopotential height, respectively. About 25% are Atlantic type cyclones, 25% emerge directly over central Europe, and another 25% originate from the lee of the Alps. The other types are less frequent (Mediterranean 12%, Polar 7%, Continental 2%, and Vb 4%). The track types show distinct characteristics in terms of cyclone intensity and cyclone life stage when entering central Europe. Cyclones of type Vb are, on average, the most intense cyclones over central Europe and even more intense than Atlantic cyclones in summer, pointing to their potential for generating extreme precipitation. The identified cyclones account for 46%-76% of long-term precipitation in a focus region in central Europe. Precipitation differs significantly between cyclones, with Atlantic and Vb cyclones producing the highest and Continental and Polar cyclones producing the lowest long-term precipitation totals. The contributions of cyclone types to total precipitation show distinct spatial patterns within central Europe. The new cyclone type catalog will be useful for identifying the relevance of specific track types for precipitation extremes in central Europe and analyze their temporal behavior in the context of climate change.

  18. Risk-Based Prioritization Method for the Classification of Groundwater Pollution from Hazardous Waste Landfills. (United States)

    Yang, Yu; Jiang, Yong-Hai; Lian, Xin-Ying; Xi, Bei-Dou; Ma, Zhi-Fei; Xu, Xiang-Jian; An, Da


    Hazardous waste landfill sites are a significant source of groundwater pollution. To ensure that these landfills with a significantly high risk of groundwater contamination are properly managed, a risk-based ranking method related to groundwater contamination is needed. In this research, a risk-based prioritization method for the classification of groundwater pollution from hazardous waste landfills was established. The method encompasses five phases, including risk pre-screening, indicator selection, characterization, classification and, lastly, validation. In the risk ranking index system employed here, 14 indicators involving hazardous waste landfills and migration in the vadose zone as well as aquifer were selected. The boundary of each indicator was determined by K-means cluster analysis and the weight of each indicator was calculated by principal component analysis. These methods were applied to 37 hazardous waste landfills in China. The result showed that the risk for groundwater contamination from hazardous waste landfills could be ranked into three classes from low to high risk. In all, 62.2 % of the hazardous waste landfill sites were classified in the low and medium risk classes. The process simulation method and standardized anomalies were used to validate the result of risk ranking; the results were consistent with the simulated results related to the characteristics of contamination. The risk ranking method was feasible, valid and can provide reference data related to risk management for groundwater contamination at hazardous waste landfill sites.

  19. Gross alpha determination in radioactive wastes from nuclear power plants using the track registration technique

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Navarro, M.J. [Universidad Politecnica de Madrid (UPM) E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren, s/n, 28040 Madrid (Spain)]. E-mail:; Pujol, Ll. [Centro de Estudios y Experimentacion de Obras Publicas (CEDEX), Alfonso XII, 3, 28014 Madrid (Spain); Gonzalez-Gonzalez, J.A. [Universidad Politecnica de Madrid (UPM) E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren, s/n, 28040 Madrid (Spain)


    Low and intermediate level nuclear wastes (ion-exchange resins and evaporator concentrates) essentially contain beta and gamma emitters, with very few alpha emitters. Several techniques may be used to determine gross alpha activity but, in this case, solid-state nuclear track detectors (SSNTDs) are a suitable technique for gross alpha determination because track detectors are not sensitive to beta and gamma emitters. Also, this technique is simple and inexpensive. In this paper, we studied the parameters (background, efficiency and self-absorption) that could affect the gross alpha determination using SSNTDs for both sample preparation methods, the 'dry method' with tensioactives and the 'wet method'. For the 'dry method', a self-absorption curve for {sup 241}Am standard was prepared using a set of varying thickness of sodium salt and for two different tensioactives: Tween{sup (R)}20 and Teg. The results showed that, below 1mg/cm{sup 2}, the self-absorption factor can be considered similar for both tensioactives and equal to unity. Several detectors for gross alpha determination were compared and we found that the most suitable techniques were ZnS(Ag) solid scintillator and track detectors. Both detectors were used to compare radioactive waste samples. Finally, the proposed methods ('dry method' with Teg tensioactive and 'wet method') using track detectors were tested by analysing the gross alpha activity of several radioactive wastes.

  20. Classification of the Z-Pinch Waste Stream as Low-Level Waste for Disposal

    Energy Technology Data Exchange (ETDEWEB)

    Singledecker, Steven John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    The purpose of this document is to describe the waste stream from Z-Pinch Residual Waste Project that due to worker safety concerns and operational efficiency is a candidate for blending Transuranic and low level waste together and can be safely packaged as low-level waste consistent with DOE Order 435.1 requirements and NRC guidance 10 CFR 61.42. This waste stream consists of the Pu-ICE post-shot containment systems, including plutonium targets, generated from the Z Machine experiments requested by LANL and conducted by SNL/NM. In the past, this TRU waste was shipped back to LANL after Sandia sends the TRU data package to LANL to certify the characterization (by CCP), transport and disposition at WIPP (CBFO) per LANL MOU-0066. The Low Level Waste is managed, characterized, shipped and disposed of at NNSS by SNL/NM per Sandia MOU # 11-S-560.

  1. Classification of user performance in the Ruff Figural Fluency Test based on eye-tracking features

    Directory of Open Access Journals (Sweden)

    Borys Magdalena


    Full Text Available Cognitive assessment in neurological diseases represents a relevant topic due to its diagnostic significance in detecting disease, but also in assessing progress of the treatment. Computer-based tests provide objective and accurate cognitive skills and capacity measures. The Ruff Figural Fluency Test (RFFT provides information about non-verbal capacity for initiation, planning, and divergent reasoning. The traditional paper form of the test was transformed into a computer application and examined. The RFFT was applied in an experiment performed among 70 male students to assess their cognitive performance in the laboratory environment. Each student was examined in three sequential series. Besides the students’ performances measured by using in app keylogging, the eye-tracking data obtained by non-invasive video-based oculography were gathered, from which several features were extracted. Eye-tracking features combined with performance measures (a total number of designs and/or error ratio were applied in machine learning classification. Various classification algorithms were applied, and their accuracy, specificity, sensitivity and performance were compared.

  2. Solid waste bin detection and classification using Dynamic Time Warping and MLP classifier

    Energy Technology Data Exchange (ETDEWEB)

    Islam, Md. Shafiqul, E-mail: [Dept. of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Selangore (Malaysia); Hannan, M.A., E-mail: [Dept. of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Selangore (Malaysia); Basri, Hassan [Dept. of Civil and Structural Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Selangore (Malaysia); Hussain, Aini; Arebey, Maher [Dept. of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Selangore (Malaysia)


    Highlights: • Solid waste bin level detection using Dynamic Time Warping (DTW). • Gabor wavelet filter is used to extract the solid waste image features. • Multi-Layer Perceptron classifier network is used for bin image classification. • The classification performance evaluated by ROC curve analysis. - Abstract: The increasing requirement for Solid Waste Management (SWM) has become a significant challenge for municipal authorities. A number of integrated systems and methods have introduced to overcome this challenge. Many researchers have aimed to develop an ideal SWM system, including approaches involving software-based routing, Geographic Information Systems (GIS), Radio-frequency Identification (RFID), or sensor intelligent bins. Image processing solutions for the Solid Waste (SW) collection have also been developed; however, during capturing the bin image, it is challenging to position the camera for getting a bin area centralized image. As yet, there is no ideal system which can correctly estimate the amount of SW. This paper briefly discusses an efficient image processing solution to overcome these problems. Dynamic Time Warping (DTW) was used for detecting and cropping the bin area and Gabor wavelet (GW) was introduced for feature extraction of the waste bin image. Image features were used to train the classifier. A Multi-Layer Perceptron (MLP) classifier was used to classify the waste bin level and estimate the amount of waste inside the bin. The area under the Receiver Operating Characteristic (ROC) curves was used to statistically evaluate classifier performance. The results of this developed system are comparable to previous image processing based system. The system demonstration using DTW with GW for feature extraction and an MLP classifier led to promising results with respect to the accuracy of waste level estimation (98.50%). The application can be used to optimize the routing of waste collection based on the estimated bin level.

  3. Characteristics and Classification of Solid Radioactive Waste From the Front-End of the Uranium Fuel Cycle. (United States)

    Liu, Xinhua; Wei, Fangxin; Xu, Chunyan; Liao, Yunxuan; Jiang, Jing


    The proper classification of radioactive waste is the basis upon which to define its disposal method. In view of differences between waste containing artificial radionuclides and waste with naturally occurring radionuclides, the scientific definition of the properties of waste arising from the front end of the uranium fuel cycle (UF Waste) is the key to dispose of such waste. This paper is intended to introduce briefly the policy and practice to dispose of such waste in China and some foreign countries, explore how to solve the dilemma facing such waste, analyze in detail the compositions and properties of such waste, and finally put forward a new concept of classifying such waste as waste with naturally occurring radionuclides.


    Energy Technology Data Exchange (ETDEWEB)



    Recent policy from the Department of Energy/Office of Safeguards and Security (DOE/OSS) has identified the need to report nuclear materials in waste in a manner that is consistent with the Department of Energy's Nuclear Materials Information System (NMIS), which uses Form 471 as its official record. NMIS is used to track nuclear material inventories while they are subject to safeguards. This requirement necessitates the reevaluation of existing business practices that are used to track and report these nuclear materials. This paper provides a methodology for applying a systems approach to the evaluation of the flow of nuclear waste materials from a generating facility through to permanent disposal. This methodology can be used to integrate existing systems and leverage data already gathered that support both the waste reporting requirements and the NMIS requirements. In order to consider an active waste reporting system that covers waste management through to final disposal, the requirements for characterization, certification, and transportation for disposal at the Waste Isolation Pilot Plant (WIPP) are used as an example. These requirements are found in the WIPP Waste Acceptance Criteria (WIPP/WAC) and associated requirement documents. This approach will prevent inconsistencies in reported data and address current and future needs. For example, spent fuel (which the U.S. intends to dispose of as high-level waste) has not been viewed as particularly attractive in terms of proliferation in comparison to materials associated with other parts of the nuclear fuel cycle. However, collecting high-level waste (or some types of defense waste) in one location where it will be left for hundreds or thousands of years presents proliferation and safeguards issues that need to be considered as part of a systems evaluation. This paper brings together information on domestic and international safeguards practices and considers the current system of documentation used by the

  5. Feature Classification for Robust Shape-Based Collaborative Tracking and Model Updating

    Directory of Open Access Journals (Sweden)

    C. S. Regazzoni


    Full Text Available A new collaborative tracking approach is introduced which takes advantage of classified features. The core of this tracker is a single tracker that is able to detect occlusions and classify features contributing in localizing the object. Features are classified in four classes: good, suspicious, malicious, and neutral. Good features are estimated to be parts of the object with a high degree of confidence. Suspicious ones have a lower, yet significantly high, degree of confidence to be a part of the object. Malicious features are estimated to be generated by clutter, while neutral features are characterized with not a sufficient level of uncertainty to be assigned to the tracked object. When there is no occlusion, the single tracker acts alone, and the feature classification module helps it to overcome distracters such as still objects or little clutter in the scene. When more than one desired moving objects bounding boxes are close enough, the collaborative tracker is activated and it exploits the advantages of the classified features to localize each object precisely as well as updating the objects shape models more precisely by assigning again the classified features to the objects. The experimental results show successful tracking compared with the collaborative tracker that does not use the classified features. Moreover, more precise updated object shape models will be shown.

  6. Radioactive and mixed waste - risk as a basis for waste classification. Symposium proceedings No. 2

    Energy Technology Data Exchange (ETDEWEB)



    The management of risks from radioactive and chemical materials has been a major environmental concern in the United states for the past two or three decades. Risk management of these materials encompasses the remediation of past disposal practices as well as development of appropriate strategies and controls for current and future operations. This symposium is concerned primarily with low-level radioactive wastes and mixed wastes. Individual reports were processed separately for the Department of Energy databases.

  7. E-waste : Collect more, treat better; Tracking take-back system performance for eco-efficient electronics recycling

    NARCIS (Netherlands)

    Wang, F.


    This dissertation establishes a methodology for evaluating the performance of take-back and treatment systems for end-oflife electronics (e-waste). First, a comprehensive classification is developed to fully understand the complex characteristics of e-waste. A multivariate model is then created to

  8. Trash track--active location sensing for evaluating e-waste transportation. (United States)

    Offenhuber, Dietmar; Wolf, Malima I; Ratti, Carlo


    Waste and recycling systems are complex and far-reaching, but its mechanisms are poorly understood by the public, in some cases government organizations and even the waste management sector itself. The lack of empirical data makes it challenging to assess the environmental impact of trash collection, removal and disposal. This is especially the case for the global movement of electronic wastes. Senseable City Lab's Trash Track project tackles this scarcity of data by following the trajectories of individual objects. The project presents a methodology involving active location sensors that were placed on end-of-life products donated by volunteers in the Seattle, Washington area. These tags sent location messages chronicling their journey, some over the course of a month or more. In this paper, the authors focus on the analysis of traces acquired from 146 items of electronic waste, estimating evaluating the environmental impact, including the travel distances and end-of-life treatments for the products. Combining this information with impact evaluation from the US Environmental Protection Agency's Waste Reduction Model (WARM) allows for the creation of environmental impact profiles for individual pieces of trash.

  9. Target tracking and classification from labeled and unlabeled data in wireless sensor networks. (United States)

    Yoo, Jaehyun; Kim, Hyoun Jin


    Tracking the locations and identities of moving targets in the surveillance area of wireless sensor networks is studied. In order to not rely on high-cost sensors that have been used in previous researches, we propose the integrated localization and classification based on semi-supervised learning, which uses both labeled and unlabeled data obtained from low-cost distributed sensor network. In our setting, labeled data are obtained by seismic and PIR sensors that contain information about the types of the targets. Unlabeled data are generated from the RF signal strength by applying Gaussian process, which represents the probability of predicted target locations. Finally, by using classified unlabeled data produced by semi-supervised learning, identities and locations of multiple targets are estimated. In addition, we consider a case when the labeled data are absent, which can happen due to fault or lack of the deployed sensor nodes and communication failure. We overcome this situation by defining artificial labeled data utilizing characteristics of support vector machine, which provides information on the importance of each training data point. Experimental results demonstrate the accuracy of the proposed tracking algorithm and its robustness to the absence of the labeled data thanks to the artificial labeled data.

  10. Visual Tracking of Deformation and Classification of Non-Rigid Objects with Robot Hand Probing

    Directory of Open Access Journals (Sweden)

    Fei Hui


    Full Text Available Performing tasks with a robot hand often requires a complete knowledge of the manipulated object, including its properties (shape, rigidity, surface texture and its location in the environment, in order to ensure safe and efficient manipulation. While well-established procedures exist for the manipulation of rigid objects, as well as several approaches for the manipulation of linear or planar deformable objects such as ropes or fabric, research addressing the characterization of deformable objects occupying a volume remains relatively limited. The paper proposes an approach for tracking the deformation of non-rigid objects under robot hand manipulation using RGB-D data. The purpose is to automatically classify deformable objects as rigid, elastic, plastic, or elasto-plastic, based on the material they are made of, and to support recognition of the category of such objects through a robotic probing process in order to enhance manipulation capabilities. The proposed approach combines advantageously classical color and depth image processing techniques and proposes a novel combination of the fast level set method with a log-polar mapping of the visual data to robustly detect and track the contour of a deformable object in a RGB-D data stream. Dynamic time warping is employed to characterize the object properties independently from the varying length of the tracked contour as the object deforms. The proposed solution achieves a classification rate over all categories of material of up to 98.3%. When integrated in the control loop of a robot hand, it can contribute to ensure stable grasp, and safe manipulation capability that will preserve the physical integrity of the object.

  11. Hazard property classification of waste according to the recent propositions of the EC using different methods. (United States)

    Hennebert, Pierre; van der Sloot, Hans A; Rebischung, Flore; Weltens, Reinhilde; Geerts, Lieve; Hjelmar, Ole


    Hazard classification of waste is a necessity, but the hazard properties (named "H" and soon "HP") are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors. In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>100). Data for 45 wastes - documented with extensive chemical analysis and flammability test - were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values. This data set showed HP 14 'Ecotoxic chronic' is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 'Carcinogenic'. The third most frequent hazard is HP 10 'Toxic for reproduction' and the fourth most frequent hazard is HP 4 "Irritant - skin irritation and eye damage". In a stepwise approach, it seems relevant to assess HP 14 first, then, if

  12. Microbial source tracking in impaired watersheds using PhyloChip and machine-learning classification. (United States)

    Dubinsky, Eric A; Butkus, Steven R; Andersen, Gary L


    Sources of fecal indicator bacteria are difficult to identify in watersheds that are impacted by a variety of non-point sources. We developed a molecular source tracking test using the PhyloChip microarray that detects and distinguishes fecal bacteria from humans, birds, ruminants, horses, pigs and dogs with a single test. The multiplexed assay targets 9001 different 25-mer fragments of 16S rRNA genes that are common to the bacterial community of each source type. Both random forests and SourceTracker were tested as discrimination tools, with SourceTracker classification producing superior specificity and sensitivity for all source types. Validation with 12 different mammalian sources in mixtures found 100% correct identification of the dominant source and 84-100% specificity. The test was applied to identify sources of fecal indicator bacteria in the Russian River watershed in California. We found widespread contamination by human sources during the wet season proximal to settlements with antiquated septic infrastructure and during the dry season at beaches during intense recreational activity. The test was more sensitive than common fecal indicator tests that failed to identify potential risks at these sites. Conversely, upstream beaches and numerous creeks with less reliance on onsite wastewater treatment contained no fecal signal from humans or other animals; however these waters did contain high counts of fecal indicator bacteria after rain. Microbial community analysis revealed that increased E. coli and enterococci at these locations did not co-occur with common fecal bacteria, but rather co-varied with copiotrophic bacteria that are common in freshwaters with high nutrient and carbon loading, suggesting runoff likely promoted the growth of environmental strains of E. coli and enterococci. These results indicate that machine-learning classification of PhyloChip microarray data can outperform conventional single marker tests that are used to assess health

  13. Non-fuel assembly components: 10 CFR 61.55 classification for waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Migliore, R.J.; Reid, B.D.; Fadeff, S.K.; Pauley, K.A.; Jenquin, U.P.


    This document reports the results of laboratory radionuclide measurements on a representative group of non-fuel assembly (NFA) components for the purposes of waste classification. This document also provides a methodology to estimate the radionuclide inventory of NFA components, including those located outside the fueled region of a nuclear reactor. These radionuclide estimates can then be used to determine the waste classification of NFA components for which there are no physical measurements. Previously, few radionuclide inventory measurements had been performed on NFA components. For this project, recommended scaling factors were selected for the ORIGEN2 computer code that result in conservative estimates of radionuclide concentrations in NFA components. These scaling factors were based upon experimental data obtained from the following NFA components: (1) a pressurized water reactor (PWR) burnable poison rod assembly, (2) a PVM rod cluster control assembly, and (3) a boiling water reactor cruciform control rod blade. As a whole, these components were found to be within Class C limits. Laboratory radionuclide measurements for these components are provided in detail.

  14. Solid waste information and tracking system client-server conversion project management plan

    Energy Technology Data Exchange (ETDEWEB)

    May, D.L.


    This Project Management Plan is the lead planning document governing the proposed conversion of the Solid Waste Information and Tracking System (SWITS) to a client-server architecture. This plan presents the content specified by American National Standards Institute (ANSI)/Institute of Electrical and Electronics Engineers (IEEE) standards for software development, with additional information categories deemed to be necessary to describe the conversion fully. This plan is a living document that will be reviewed on a periodic basis and revised when necessary to reflect changes in baseline design concepts and schedules. This PMP describes the background, planning and management of the SWITS conversion. It does not constitute a statement of product requirements. Requirements and specification documentation needed for the SWITS conversion will be released as supporting documents.

  15. The evaluation of an analytical protocol for the determination of substances in waste for hazard classification

    Energy Technology Data Exchange (ETDEWEB)

    Hennebert, Pierre, E-mail: [INERIS – Institut National de l’Environnement Industriel et des Risques, Domaine du Petit Arbois BP33, F-13545 Aix-en-Provence (France); Papin, Arnaud [INERIS, Parc Technologique ALATA, BP No. 2, 60550 Verneuil en Halatte (France); Padox, Jean-Marie [INERIS – Institut National de l’Environnement Industriel et des Risques, Domaine du Petit Arbois BP33, F-13545 Aix-en-Provence (France); Hasebrouck, Benoît [INERIS, Parc Technologique ALATA, BP No. 2, 60550 Verneuil en Halatte (France)


    Highlights: • Knowledge of wastes in substances will be necessary to assess HP1–HP15 hazard properties. • A new analytical protocol is proposed for this and tested by two service laboratories on 32 samples. • Sixty-three percentage of the samples have a satisfactory analytical balance between 90% and 110%. • Eighty-four percentage of the samples were classified identically (Seveso Directive) for their hazardousness by the two laboratories. • The method, in progress, is being normalized in France and is be proposed to CEN. - Abstract: The classification of waste as hazardous could soon be assessed in Europe using largely the hazard properties of its constituents, according to the the Classification, Labelling and Packaging (CLP) regulation. Comprehensive knowledge of the component constituents of a given waste will therefore be necessary. An analytical protocol for determining waste composition is proposed, which includes using inductively coupled plasma (ICP) screening methods to identify major elements and gas chromatography/mass spectrometry (GC–MS) screening techniques to measure organic compounds. The method includes a gross or indicator measure of ‘pools’ of higher molecular weight organic substances that are taken to be less bioactive and less hazardous, and of unresolved ‘mass’ during the chromatography of volatile and semi-volatile compounds. The concentration of some elements and specific compounds that are linked to specific hazard properties and are subject to specific regulation (examples include: heavy metals, chromium(VI), cyanides, organo-halogens, and PCBs) are determined by classical quantitative analysis. To check the consistency of the analysis, the sum of the concentrations (including unresolved ‘pools’) should give a mass balance between 90% and 110%. Thirty-two laboratory samples comprising different industrial wastes (liquids and solids) were tested by two routine service laboratories, to give circa 7000 parameter

  16. A new classification scheme of plastic wastes based upon recycling labels. (United States)

    Özkan, Kemal; Ergin, Semih; Işık, Şahin; Işıklı, Idil


    Since recycling of materials is widely assumed to be environmentally and economically beneficial, reliable sorting and processing of waste packaging materials such as plastics is very important for recycling with high efficiency. An automated system that can quickly categorize these materials is certainly needed for obtaining maximum classification while maintaining high throughput. In this paper, first of all, the photographs of the plastic bottles have been taken and several preprocessing steps were carried out. The first preprocessing step is to extract the plastic area of a bottle from the background. Then, the morphological image operations are implemented. These operations are edge detection, noise removal, hole removing, image enhancement, and image segmentation. These morphological operations can be generally defined in terms of the combinations of erosion and dilation. The effect of bottle color as well as label are eliminated using these operations. Secondly, the pixel-wise intensity values of the plastic bottle images have been used together with the most popular subspace and statistical feature extraction methods to construct the feature vectors in this study. Only three types of plastics are considered due to higher existence ratio of them than the other plastic types in the world. The decision mechanism consists of five different feature extraction methods including as Principal Component Analysis (PCA), Kernel PCA (KPCA), Fisher's Linear Discriminant Analysis (FLDA), Singular Value Decomposition (SVD) and Laplacian Eigenmaps (LEMAP) and uses a simple experimental setup with a camera and homogenous backlighting. Due to the giving global solution for a classification problem, Support Vector Machine (SVM) is selected to achieve the classification task and majority voting technique is used as the decision mechanism. This technique equally weights each classification result and assigns the given plastic object to the class that the most classification

  17. Activation, decay heat, and waste classification studies of the European DEMO concept (United States)

    Gilbert, M. R.; Eade, T.; Bachmann, C.; Fischer, U.; Taylor, N. P.


    Inventory calculations have a key role to play in designing future fusion power plants because, for a given irradiation field and material, they can predict the time evolution in chemical composition, activation, decay heat, gamma-dose, gas production, and even damage (dpa) dose. For conceptual designs of the European DEMO fusion reactor such calculations provide information about the neutron shielding requirements, maintenance schedules, and waste disposal prospects; thereby guiding future development. Extensive neutron-transport and inventory calculations have been performed for a reference DEMO reactor model with four different tritium-breeding blanket concepts. The results have been used to chart the post-operation variation in activity and decay heat from different vessel components, demonstrating that the shielding performance of the different blanket concepts—for a given blanket thickness—varies significantly. Detailed analyses of the simulated nuclide inventories for the vacuum vessel (VV) and divertor highlight the most dominant radionuclides, potentially suggesting how changes in material composition could help to reduce activity. Minor impurities in the raw composition of W used in divertor tiles, for example, are shown to produce undesirable long-lived radionuclides. Finally, waste classifications, based on UK regulations, and a recycling potential limit, have been applied to estimate the time-evolution in waste masses for both the entire vessel (including blanket modules, VV, divertor, and some ex-vessel components) and individual components, and also to suggest when a particular component might be suitable for recycling. The results indicate that the large mass of the VV will not be classifiable as low level waste on the 100 year timescale, but the majority of the divertor will be, and that both components will be potentially recyclable within that time.

  18. Identification, classification and management of industrial waste in Kavir steel complex according to the Bazel convention and RCRA

    Directory of Open Access Journals (Sweden)

    Mohammad Hasan Ehrampoush


    Full Text Available Introduction: Requiring industries for implementing industrial waste management programs and planning for proper waste disposal is essential in order to achieve sustainable development. Therefore, industrial waste management program was done in Kavir Steel Complex, in Aran va Bidgol region to identify and classify industrial waste and also to present solutions for improving waste management. In this complex, production process is hot rolling steel and the product is rebar. Material and Method: The preset study was conducted in Kavir Steel Complex. Following survey of production process and sources of waste, the type and volume of produced waste were identified and measured during 3 months. Then, the classification of wastes was done according to the Bazel Convention and Resource Conservation and Recovery Act (RCRA, and finally new industrial & health solid waste management program was presented. Result: Considering the volume, industrial waste of production process in Kavir Steel Complex was between 130 to 180 grams per each ton of rebar. Main industrial waste included oxide of steel billet, industrial sludge, used oil and lubricant which were classified according to the RCRA: 8 materials with T code, 1 with C code, 5 with I code and 3 materials with C code. Conclusion: The results revealed that the most amount of industrial waste in Kavir Steel Complex is the waste of steel billet and industrial sludge, and more than 90% of Kavir steel industrial waste were reused and recycled inside or outside of this complex. It is recommended that used oil to be transport and maintain in the safe containers.

  19. Reliable classification of moving waste materials with LIBS in concrete recycling. (United States)

    Xia, Han; Bakker, M C M


    Effective discrimination between different waste materials is of paramount importance for inline quality inspection of recycle concrete aggregates from demolished buildings. The moving targeted materials in the concrete waste stream are wood, PVC, gypsum block, glass, brick, steel rebar, aggregate and cement paste. For each material, up to three different types were considered, while thirty particles of each material were selected. Proposed is a reliable classification methodology based on integration of the LIBS spectral emissions in a fixed time window, starting from the deployment of the laser shot. PLS-DA (multi class) and the hybrid combination PCA-Adaboost (binary class) were investigated as efficient classifiers. In addition, mean centre and auto scaling approaches were compared for both classifiers. Using 72 training spectra and 18 test spectra per material, each averaged by ten shots, only PLS-DA achieved full discrimination, and the mean centre approach made it slightly more robust. Continuing with PLS-DA, the relation between data averaging and convergence to 0.3% average error was investigated using 9-fold cross-validations. Single-shot PLS-DA presented the highest challenge and most desirable methodology, which converged with 59 PC. The degree of success in practical testing will depend on the quality of the training set and the implications of the possibly remaining false positives. © 2013 Published by Elsevier B.V.

  20. A new classification scheme of European cyclone tracks with relevance to precipitation

    National Research Council Canada - National Science Library

    Hofstätter, M; Chimani, B; Lexer, A; Blöschl, G


    .... The other types are less frequent (Mediterranean 12%, Polar 7%, Continental 2%, and Vb 4%). The track types show distinct characteristics in terms of cyclone intensity and cyclone life stage when entering central Europe...

  1. Slip estimation methods for proprioceptive terrain classification using tracked mobile robots

    CSIR Research Space (South Africa)

    Masha, Ditebogo F


    Full Text Available Recent work has shown that proprioceptive measurements such as terrain slip can be used for terrain classification. This paper investigates the suitability of four simple slip estimation methods for differentiating between indoor and outdoor terrain...

  2. Classification (United States)

    Clary, Renee; Wandersee, James


    In this article, Renee Clary and James Wandersee describe the beginnings of "Classification," which lies at the very heart of science and depends upon pattern recognition. Clary and Wandersee approach patterns by first telling the story of the "Linnaean classification system," introduced by Carl Linnacus (1707-1778), who is…

  3. Fusion of optical flow based motion pattern analysis and silhouette classification for person tracking and detection

    NARCIS (Netherlands)

    Tangelder, J.W.H.; Lebert, E.; Burghouts, G.J.; Zon, K. van; Den Uyl, M.J.


    This paper presents a novel approach to detect persons in video by combining optical flow based motion analysis and silhouette based recognition. A new fast optical flow computation method is described, and its application in a motion based analysis framework unifying human tracking and detection is

  4. Towards a Classification of Translation Styles based on Eye-tracking and Keylogging Data

    DEFF Research Database (Denmark)

    Dragsted, Barbara; Carl, Michael


    This article seeks to formulate translator profiles based on process data from keylogging and eye-tracking, while at the same time identifying features which are shared by all translators in a sample consisting of both students and professionals. Data have been collected from 12 professional...

  5. Helicopter and aircraft detection and classification using adaptive beamforming and tracking techniques

    NARCIS (Netherlands)

    Koersel, A.C. van; Beerens, S.P.


    Measurements of different types of aircraft are performed and used to obtain information on target characteristics and develop an algorithm to perform classification between jet aircraft, propeller aircraft and helicopters. To obtain a larger detection range, reduce background noise and to reduce

  6. Stardust: An overview of the tracks in the aerogel (calibration, classification and particle size distribution) (United States)

    Burchell, M. J.; Fairey, S. J.; Hörz, F.; Wozniakiewicz, P. J.; Kearsley, A. T.; Brownlee, D. E.; See, T. H.; Westphal, A.; Green, S. F.; Trigo-Rodríguez, J. M.


    The NASA Stardust mission (1) to comet P/Wild-2 returned to Earth in January 2006 carrying a cargo of dust captured in aerogel and residue rich craters in aluminium foils (2). Aerogel is a low density, highly porous material (3, 4). The aerogel that was carried by Stardust in the cometary dust collector trays was a SiO2 aerogel, arranged in blocks 4 cm x 2 cm (front face) and 3 cm deep, with density which varied smoothly from 5 mg/cc at the front surface to 50 mg/cc at the rear surface (5). A first look at the whole cometary dust tray at NASA showed that there were many impact features in the aerogel. During the Preliminary Examination period about 15% of the aerogel blocks were removed and studied in detail. The tracks observed in these blocks were classified into three groups: Type A were long relatively narrow tracks of "carrot shape", Type B tracks were again fairly long but had a large bulbous region at the top and appear like the bowl and stem of a flute champagne glass, Type C were purely bulbous tracks with no stem emerging beneath them. Data on the sizes and relative populations of these tracks will be given (also see (6)) along with a discussion of their implications for impactor composition. Laboratory calibrations of the impacts in aerogel have been carried out using glass beads and these permit an estimate of the size of the impactor based on the measured track properties (6). When applied to the tracks measured in the Stardust aerogel, a cumulative particle size distribution was obtained (7) which will be discussed. References (1) Brownlee D.E. et al., J. Geophys. Res. 108, E10, 8111, 2003. (2) Brownlee D.E. et al., Science 314, 1711 - 1716. 2006. (3) Kistler S.S., Nature 127, 741, 1931. (4) Burchell M.J. et al., Ann. Rev. Earth. Planet. Sci. 34, 385 - 418, 2006. (5) Tsou P. et al., J. Geophys. Res. 108(E10), 8113, 2003. (6) Burchell et al., submitted to MAPS, 2006. (7) Hörz F. et al., Science 314, 1716 - 1719, 2006.

  7. Classification

    DEFF Research Database (Denmark)

    Hjørland, Birger


    This article presents and discusses definitions of the term “classification” and the related concepts “Concept/conceptualization,”“categorization,” “ordering,” “taxonomy” and “typology.” It further presents and discusses theories of classification including the influences of Aristotle...... and Wittgenstein. It presents different views on forming classes, including logical division, numerical taxonomy, historical classification, hermeneutical and pragmatic/critical views. Finally, issues related to artificial versus natural classification and taxonomic monism versus taxonomic pluralism are briefly...

  8. Viability Analysis of Waste Tires as Material for Rail Vibration and Noise Control in Modern Tram Track Systems

    Directory of Open Access Journals (Sweden)

    Caiyou Zhao


    Full Text Available This research study focused on the effect of using damping chamber elements made from waste tires on railway noise reduction. First, the energy absorption characteristics of damping chamber elements with various gradation combinations and compaction indices were measured in the laboratory using compression testing. The laboratory compression results demonstrated that the optimal gradation combination of damping chamber elements is as follows: the content of fine rubber particles is 10%, the content of coarse granules is 90%, and the optimal compaction index is 0.98. Next, the findings from the laboratory compression-test studies were used to produce damping chamber elements that were applied to a full-scale modern track model in the laboratory. The measurements of the dynamic properties indicated that the damping chamber elements could significantly reduce the vibration levels of the rail head. Finally, the damping chamber elements, which had been proven effective through laboratory dynamic tests, were widely applied to test rail sections in the field. The field tests demonstrated that damping chamber elements can significantly increase the track vibration decay rate in the frequency range of 200–10000 Hz. Therefore, damping chamber elements made from waste tires are able to control rail vibration and noise in modern tram track systems.

  9. Iqpc 2015 Track: Tree Separation and Classification in Mobile Mapping LIDAR Data (United States)

    Gorte, B.; Oude Elberink, S.; Sirmacek, B.; Wang, J.


    The European FP7 project IQmulus yearly organizes several processing contests, where submissions are requested for novel algorithms for point cloud and other big geodata processing. This paper describes the set-up and execution of a contest having the purpose to evaluate state-of-the-art algorithms for Mobile Mapping System point clouds, in order to detect and identify (individual) trees. By the nature of MMS these are trees in the vicinity of the road network (rather than in forests). Therefore, part of the challenge is distinguishing between trees and other objects, such as buildings, street furniture, cars etc. Three submitted segmentation and classification algorithms are thus evaluated.


    Directory of Open Access Journals (Sweden)

    F. Fakheri Raouf, R. Nabizadeh and N. Jafarzadeh


    Full Text Available Petrochemical industries are considered as strategic and important sectors in economic development of Iran. Razi petrochemical factory is one of complex in Iran, established in 1970 with 100 hectare. In this research, the possibility of waste minimization in the ammonia unit of Razi petrochemical complex with about 1000 tons per year was studied for a period of 18 months from September 2003 to April 2005. More than 20 site visits were conducted and the required information was collected. Factors such as industrial solid wastes quality and quantity, sources of generation, production period and the present management practice, were studied. Petrochemical solid wastes were classified based on the recommended method of the United Nations and appropriate policies were suggested for waste minimization. The collected results of this study show production of 185 tons of industrial solid wastes from 45 sources which contained 68.5% catalysts, 10.25% metal barrels, 18.61% aluminum ball, 2.62% plastic barrels and 0.02% paper. 93.3% of these wastes were generated as the result of catalysts change, 3.3% as the result of using chemicals and oils, 1.7% as the result of methanol solution amid application, and 1.1% because of aluminum ball changes. Based on the UNEP methods, the ammonia unit wastes classified as 19/7%hazadrous and 87,12% non hazardous. At present 87.12% of these wastes are being dumped in the area and 12.88% are sold. Proposed procedures for waste minimization contain 68.5% reuse and recycling and 31.5% recycling.

  11. Dynamic Agent Classification and Tracking Using an Ad Hoc Mobile Acoustic Sensor Network

    Directory of Open Access Journals (Sweden)

    Friedlander David


    Full Text Available Autonomous networks of sensor platforms can be designed to interact in dynamic and noisy environments to determine the occurrence of specified transient events that define the dynamic process of interest. For example, a sensor network may be used for battlefield surveillance with the purpose of detecting, identifying, and tracking enemy activity. When the number of nodes is large, human oversight and control of low-level operations is not feasible. Coordination and self-organization of multiple autonomous nodes is necessary to maintain connectivity and sensor coverage and to combine information for better understanding the dynamics of the environment. Resource conservation requires adaptive clustering in the vicinity of the event. This paper presents methods for dynamic distributed signal processing using an ad hoc mobile network of microsensors to detect, identify, and track targets in noisy environments. They seamlessly integrate data from fixed and mobile platforms and dynamically organize platforms into clusters to process local data along the trajectory of the targets. Local analysis of sensor data is used to determine a set of target attribute values and classify the target. Sensor data from a field test in the Marine base at Twentynine Palms, Calif, was analyzed using the techniques described in this paper. The results were compared to "ground truth" data obtained from GPS receivers on the vehicles.

  12. The opportunity of tracking food waste in school canteens: Guidelines for self-assessment. (United States)

    Derqui, Belén; Fernandez, Vicenc


    Reducing food waste is one of the key challenges of the food system and addressing it in the institutional catering industry can be a quick win. In particular, school canteens are a significant source of food waste and therefore embody a great opportunity to address food waste. The goal of our research is the development of guidelines for audit and self-assessment in measuring and managing food waste produced at school canteens. The purpose of the tool is to standardise food waste audits to be executed either by scholars, school staff or by catering companies with the objective of measuring and reducing food waste at schools. We performed a research among public and private schools and catering companies from which we obtained the key performance indicators to be measured and then pilot-tested the resulting tool in four schools with over 2900 pupil participants, measuring plate waste from over 10,000 trays. This tool will help managers in their efforts towards more sustainable organisations at the same time as the standardisation of food waste audits will provide researchers with comparable data. The study suggests that although there is low awareness on the amount of food wasted at school canteens, managers and staff are highly interested in the topic and would be willing to implement audits and reduction measures. The case study also showed that our tool is easy to implement and not disruptive. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Storm Motion Tracking Over The Arno River Basin Through Multiscale Radar Reflectivity Classification and Correlation (United States)

    Facheris, L.; Tanelli, S.; Giuli, D.

    A method is presented for analyzing the storm motion through the application of a nowcasting technique based on radar echoes tracking through multiscale correlation. The application of the correlation principle to weather radar image processing - the so called TREC (Tracking Radar Echoes by Correlation) and derived algorithms - is de- scribed in [1] and in references cited therein. The block matching approach exploited there is typical of video compression applications, whose purpose is to remove the temporal correlation between two subsequent frames of a sequence of images. In par- ticular, the wavelet decomposition approach to motion estimation seems particularly suitable for weather radar maps. In fact, block matching is particularly efficient when the images have a sufficient level of contrast. Though this does not hold for original resolution radar maps, it can be easily obtained by changing the resolution level by means of the wavelet decomposition. The technique first proposed in [2] (TREMC - Tracking of Radar Echoes by means of Multiscale Correlation) adopts a multiscale, multiresolution, and partially overlapped, block grid which adapts to the radar reflec- tivity pattern. Multiresolution decomposition is performed through 2D wavelet based filtering. Correlation coefficients are calculated taking after preliminary screening of unreliable data (e.g. those affected by ground clutter or beam shielding), so as to avoid strong undesired motion estimation biases due to the presence of stationary features. Such features are detected by a previous analysis carried out as discussed in [2]. In this paper, motion fields obtained by analyzing precipitation events over the Arno river basin are compared to the related Doppler velocity fields in order to identify growth and decay areas and orographic effects. Data presented have been collected by the weather radar station POLAR 55C sited in Montagnana (Firenze-Italy), a polarimetric C-band system providing absolute and

  14. Tracking and Classification of In-Air Hand Gesture Based on Thermal Guided Joint Filter. (United States)

    Kim, Seongwan; Ban, Yuseok; Lee, Sangyoun


    The research on hand gestures has attracted many image processing-related studies, as it intuitively conveys the intention of a human as it pertains to motional meaning. Various sensors have been used to exploit the advantages of different modalities for the extraction of important information conveyed by the hand gesture of a user. Although many works have focused on learning the benefits of thermal information from thermal cameras, most have focused on face recognition or human body detection, rather than hand gesture recognition. Additionally, the majority of the works that take advantage of multiple modalities (e.g., the combination of a thermal sensor and a visual sensor), usually adopting simple fusion approaches between the two modalities. As both thermal sensors and visual sensors have their own shortcomings and strengths, we propose a novel joint filter-based hand gesture recognition method to simultaneously exploit the strengths and compensate the shortcomings of each. Our study is motivated by the investigation of the mutual supplementation between thermal and visual information in low feature level for the consistent representation of a hand in the presence of varying lighting conditions. Accordingly, our proposed method leverages the thermal sensor's stability against luminance and the visual sensors textural detail, while complementing the low resolution and halo effect of thermal sensors and the weakness against illumination of visual sensors. A conventional region tracking method and a deep convolutional neural network have been leveraged to track the trajectory of a hand gesture and to recognize the hand gesture, respectively. Our experimental results show stability in recognizing a hand gesture against varying lighting conditions based on the contribution of the joint kernels of spatial adjacency and thermal range similarity.

  15. Tracking and Classification of In-Air Hand Gesture Based on Thermal Guided Joint Filter

    Directory of Open Access Journals (Sweden)

    Seongwan Kim


    Full Text Available The research on hand gestures has attracted many image processing-related studies, as it intuitively conveys the intention of a human as it pertains to motional meaning. Various sensors have been used to exploit the advantages of different modalities for the extraction of important information conveyed by the hand gesture of a user. Although many works have focused on learning the benefits of thermal information from thermal cameras, most have focused on face recognition or human body detection, rather than hand gesture recognition. Additionally, the majority of the works that take advantage of multiple modalities (e.g., the combination of a thermal sensor and a visual sensor, usually adopting simple fusion approaches between the two modalities. As both thermal sensors and visual sensors have their own shortcomings and strengths, we propose a novel joint filter-based hand gesture recognition method to simultaneously exploit the strengths and compensate the shortcomings of each. Our study is motivated by the investigation of the mutual supplementation between thermal and visual information in low feature level for the consistent representation of a hand in the presence of varying lighting conditions. Accordingly, our proposed method leverages the thermal sensor’s stability against luminance and the visual sensors textural detail, while complementing the low resolution and halo effect of thermal sensors and the weakness against illumination of visual sensors. A conventional region tracking method and a deep convolutional neural network have been leveraged to track the trajectory of a hand gesture and to recognize the hand gesture, respectively. Our experimental results show stability in recognizing a hand gesture against varying lighting conditions based on the contribution of the joint kernels of spatial adjacency and thermal range similarity.

  16. Technical basis for classification of low-activity waste fraction from Hanford site tanks

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, C.A., Westinghouse Hanford


    The overall objective of this report is to provide a technical basis to support a U.S. Nuclear Regulatory Commission determination to classify the low-activity waste from the Hanford Site single-shell and double-shell tanks as `incidental` wastes after removal of additional radionuclides and immobilization.The proposed processing method, in addition to the previous radionuclide removal efforts, will remove the largest practical amount of total site radioactivity, attributable to high-level wastes, for disposal in a deep geologic repository. The remainder of the waste would be considered `incidental` waste and could be disposed onsite.

  17. Technical basis for classification of low-activity waste fraction from Hanford site tanks

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, C.A.


    The overall objective of this report is to provide a technical basis to support a U.S. Nuclear Regulatory Commission determination to classify the low-activity waste from the Hanford Site single-shell and double-shell tanks as `incidental` wastes after removal of additional radionuclides and immobilization.The proposed processing method, in addition to the previous radionuclide removal efforts, will remove the largest practical amount of total site radioactivity, attributable to high-level waste, for disposal is a deep geologic repository. The remainder of the waste would be considered `incidental` waste and could be disposed onsite.

  18. Automated time activity classification based on global positioning system (GPS tracking data

    Directory of Open Access Journals (Sweden)

    Wu Jun


    Full Text Available Abstract Background Air pollution epidemiological studies are increasingly using global positioning system (GPS to collect time-location data because they offer continuous tracking, high temporal resolution, and minimum reporting burden for participants. However, substantial uncertainties in the processing and classifying of raw GPS data create challenges for reliably characterizing time activity patterns. We developed and evaluated models to classify people's major time activity patterns from continuous GPS tracking data. Methods We developed and evaluated two automated models to classify major time activity patterns (i.e., indoor, outdoor static, outdoor walking, and in-vehicle travel based on GPS time activity data collected under free living conditions for 47 participants (N = 131 person-days from the Harbor Communities Time Location Study (HCTLS in 2008 and supplemental GPS data collected from three UC-Irvine research staff (N = 21 person-days in 2010. Time activity patterns used for model development were manually classified by research staff using information from participant GPS recordings, activity logs, and follow-up interviews. We evaluated two models: (a a rule-based model that developed user-defined rules based on time, speed, and spatial location, and (b a random forest decision tree model. Results Indoor, outdoor static, outdoor walking and in-vehicle travel activities accounted for 82.7%, 6.1%, 3.2% and 7.2% of manually-classified time activities in the HCTLS dataset, respectively. The rule-based model classified indoor and in-vehicle travel periods reasonably well (Indoor: sensitivity > 91%, specificity > 80%, and precision > 96%; in-vehicle travel: sensitivity > 71%, specificity > 99%, and precision > 88%, but the performance was moderate for outdoor static and outdoor walking predictions. No striking differences in performance were observed between the rule-based and the random forest models. The random forest model was fast

  19. Mining Waste Classification and Quantity of Non-Metal Minesin Slovenia

    Directory of Open Access Journals (Sweden)

    Ana Burger


    Full Text Available Mining is an important human activity that creates wealth and supplies materials for maintaining standard of living and further human development. However, mining has also negative impacts on the environment and society. One of them is the production of mining waste throughout the entire mining cycle, in particular in the mine development and operation /production stage.Due to the EU Directive 2006/21/EC on the management of waste from the extractive industries and its implementation in Member state, estimation on quality and quantity of mining waste from active non-metal mines in Slovenia was carried out. In the selected mines mining and processing was closely examined. With material flow analysis quantity and characteristics of mining waste were defined for several mines of different commodities.Data on mining waste were afterwards generalized in order to get an overall country evaluation on mining waste “production” of non-metal mines.Mining waste as a result of mining and beneficiation processes in non-metal mines of Slovenia is either inert or non-hazardous. Most of the mining waste is used for mine reclamation running simultaneously with the production phase. The largest amounts of mining waste per unit produced are created in dimension stone industry. Since the dimensionstone production is small, the waste amount is negligible. Large quantities of mining waste are produced in crushed stone and, sand and gravel operations, because aggregate production is pretty large with regard to other non-metals production in Slovenia. We can therefore conclude that large quantities of mining waste from non-metal mines, which are mostly used in reclamation and for side products, do not represent danger to the environment.

  20. Hanford tank initiative vehicle/based waste retrieval demonstration report phase II, track 2

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, E.J.


    Using the versatile TracPUMpTm, Environmental Specialties Group, LLC (ES) performed a successful Phase 11 demonstration of a Vehicle- Based Waste Retrieval System (VWRS) for removal of waste material and residual liquid found in the Hanford Underground Storage Tanks (ousts). The purpose of this demonstration was to address issues pertaining to the use of a VWRS in OUSTS. The demonstration also revealed the waste removal capabilities of the TracPumpTm and the most effective techniques and equipment to safely and effectively remove waste simulants. ES successfully addressed the following primary issues: I . Dislodge and convey the waste forms present in the Hanford OUSTS; 2. Access the UST through tank openings as small as twenty-four inches in diameter; 3. Traverse a variety of terrains including slopes, sludges, rocks and hard, slippery surfaces without becoming mired; 4. Dislodge and convey waste within the confinement of the Decontamination Containment Capture Vessel (DCCV) and with minimal personnel exposure; 5. Decontaminate equipment to acceptable limits during retrieval from the UST; 6. Perform any required maintenance within the confinement of the DCCV; and 7. Maintain contaminate levels ``as low as reasonably achievable`` (ALARA) within the DCCV due to its crevice and comer-free design. The following materials were used to simulate the physical characteristics of wastes found in Hanford`s OUSTS: (1) Hardpan: a clay-type material that has high shear strength; (2) Saltcake: a fertilizer-based material that has high compressive strength; and (3) Wet Sludge.- a sticky, peanut- butter- like material with low shear strength. Four test beds were constructed of plywood and filled with a different simulant to a depth of eight to ten inches. Three of the test beds were of homogenous simulant material, while the fourth bed consisted of a mixture of all three simulant types.

  1. Quantitative Cell Cycle Analysis Based on an Endogenous All-in-One Reporter for Cell Tracking and Classification

    Directory of Open Access Journals (Sweden)

    Thomas Zerjatke


    Full Text Available Cell cycle kinetics are crucial to cell fate decisions. Although live imaging has provided extensive insights into this relationship at the single-cell level, the limited number of fluorescent markers that can be used in a single experiment has hindered efforts to link the dynamics of individual proteins responsible for decision making directly to cell cycle progression. Here, we present fluorescently tagged endogenous proliferating cell nuclear antigen (PCNA as an all-in-one cell cycle reporter that allows simultaneous analysis of cell cycle progression, including the transition into quiescence, and the dynamics of individual fate determinants. We also provide an image analysis pipeline for automated segmentation, tracking, and classification of all cell cycle phases. Combining the all-in-one reporter with labeled endogenous cyclin D1 and p21 as prime examples of cell-cycle-regulated fate determinants, we show how cell cycle and quantitative protein dynamics can be simultaneously extracted to gain insights into G1 phase regulation and responses to perturbations.


    Energy Technology Data Exchange (ETDEWEB)

    Eibling, R.


    Savannah River National Laboratory (SRNL) was asked to prepare saltstone from samples of Tank 50H obtained by SRNL on April 5, 2011 (Tank 50H sampling occurred on April 4, 2011) during 2QCY11 to determine the non-hazardous nature of the grout and for additional vault classification analyses. The samples were cured and shipped to Babcock & Wilcox Technical Services Group-Radioisotope and Analytical Chemistry Laboratory (B&W TSG-RACL) to perform the Toxic Characteristic Leaching Procedure (TCLP) and subsequent extract analysis on saltstone samples for the analytes required for the quarterly analysis saltstone sample. In addition to the eight toxic metals - arsenic, barium, cadmium, chromium, mercury, lead, selenium and silver - analytes included the underlying hazardous constituents (UHC) antimony, beryllium, nickel, and thallium which could not be eliminated from analysis by process knowledge. Additional inorganic species determined by B&W TSG-RACL include aluminum, boron, chloride, cobalt, copper, fluoride, iron, lithium, manganese, molybdenum, nitrate/nitrite as Nitrogen, strontium, sulfate, uranium, and zinc and the following radionuclides: gross alpha, gross beta/gamma, 3H, 60Co, 90Sr, 99Tc, 106Ru, 106Rh, 125Sb, 137Cs, 137mBa, 154Eu, 238Pu, 239/240Pu, 241Pu, 241Am, 242Cm, and 243/244Cm. B&W TSG-RACL provided subsamples to GEL Laboratories, LLC for analysis for the VOCs benzene, toluene, and 1-butanol. GEL also determines phenol (total) and the following radionuclides: 147Pm, 226Ra and 228Ra. Preparation of the 2QCY11 saltstone samples for the quarterly analysis and for vault classification purposes and the subsequent TCLP analyses of these samples showed that: (1) The saltstone waste form disposed of in the Saltstone Disposal Facility in 2QCY11 was not characteristically hazardous for toxicity. (2) The concentrations of the eight RCRA metals and UHCs identified as possible in the saltstone waste form were present at levels below the UTS. (3) Most of the

  3. Van Bebber's cyclone tracks at 700 hPa in the Eastern Alps for 1961-2002 and their comparison to circulation type classifications

    Energy Technology Data Exchange (ETDEWEB)

    Hofstaetter, Michael; Chimani, Barbara [Central Institute for Meteoroloy and Geodynamics (ZAMG), Vienna (Austria). Climate Research Dept.


    In this study, a systematic tracking of atmospheric cyclones at the pressure level of 700 hPa has been performed to determine three different track types and their climatologic characteristics over Central Europe from 1961 to 2002 by using ERA-40 (ECMWF - European Centre for Medium Range Weather Forecast, 40 year Re-Analysis) and ERA-Interim data. The specific focus is on cyclone tracks of type V as suggested by Van Bebber in 1891 and congeneric types, because of their association with extreme large-scale precipitation amounts and related flooding in Central and Eastern Europe. The tracking procedure consists of detecting isolated minima of the band-pass filtered 700 hPa geopotential height field and combining them over time to continuous tracks by nearest neighbour approach. Results show that the common Vb cyclone track is a rare event (3.5/year) and the probability of occurrence is largest in April with a secondary maximum in autumn. Furthermore, there is no temporal trend of any of these track types noticeable throughout the 42-years investigation period. The new 700 hPa cyclone track catalogue is used as a reference to verify the hypothesis of a coherence of Vb-tracks with certain circulation types (CTs). Selected objective and subjective circulation type classifications (CTCs) from COST (European Cooperation in Science and Technology) action 733 as well as a manual Vb-classification from the ZAMG (Zentralanstalt fuer Meteorologie und Geodynamik) are utilized. This study shows both the shortcomings and the potential of CTCs to discriminate Vb cyclone tracks by certain classes of stationary circulation patterns. Subjective CTCs rank higher than objective ones in terms of Brier Skill Score, which demonstrates the power to enhance relevant synoptic phenomena instead of favouring mathematical criteria. For the first time, an objective catalogue with the famous cyclone track Vb and its climatology is now on hand for the period 1961-2002, offering a valuable basis to

  4. Tracking the Flow of Resources in Electronic Waste - The Case of End-of-Life Computer Hard Disk Drives. (United States)

    Habib, Komal; Parajuly, Keshav; Wenzel, Henrik


    Recovery of resources, in particular, metals, from waste flows is widely seen as a prioritized option to reduce their potential supply constraints in the future. The current waste electrical and electronic equipment (WEEE) treatment system is more focused on bulk metals, where the recycling rate of specialty metals, such as rare earths, is negligible compared to their increasing use in modern products, such as electronics. This study investigates the challenges in recovering these resources in the existing WEEE treatment system. It is illustrated by following the material flows of resources in a conventional WEEE treatment plant in Denmark. Computer hard disk drives (HDDs) containing neodymium-iron-boron (NdFeB) magnets were selected as the case product for this experiment. The resulting output fractions were tracked until their final treatment in order to estimate the recovery potential of rare earth elements (REEs) and other resources contained in HDDs. The results further show that out of the 244 kg of HDDs treated, 212 kg comprising mainly of aluminum and steel can be finally recovered from the metallurgic process. The results further demonstrate the complete loss of REEs in the existing shredding-based WEEE treatment processes. Dismantling and separate processing of NdFeB magnets from their end-use products can be a more preferred option over shredding. However, it remains a technological and logistic challenge for the existing system.

  5. Large-scale tracking and classification for automatic analysis of cell migration and proliferation, and experimental optimization of high-throughput screens of neuroblastoma cells. (United States)

    Harder, Nathalie; Batra, Richa; Diessl, Nicolle; Gogolin, Sina; Eils, Roland; Westermann, Frank; König, Rainer; Rohr, Karl


    Computational approaches for automatic analysis of image-based high-throughput and high-content screens are gaining increased importance to cope with the large amounts of data generated by automated microscopy systems. Typically, automatic image analysis is used to extract phenotypic information once all images of a screen have been acquired. However, also in earlier stages of large-scale experiments image analysis is important, in particular, to support and accelerate the tedious and time-consuming optimization of the experimental conditions and technical settings. We here present a novel approach for automatic, large-scale analysis and experimental optimization with application to a screen on neuroblastoma cell lines. Our approach consists of cell segmentation, tracking, feature extraction, classification, and model-based error correction. The approach can be used for experimental optimization by extracting quantitative information which allows experimentalists to optimally choose and to verify the experimental parameters. This involves systematically studying the global cell movement and proliferation behavior. Moreover, we performed a comprehensive phenotypic analysis of a large-scale neuroblastoma screen including the detection of rare division events such as multi-polar divisions. Major challenges of the analyzed high-throughput data are the relatively low spatio-temporal resolution in conjunction with densely growing cells as well as the high variability of the data. To account for the data variability we optimized feature extraction and classification, and introduced a gray value normalization technique as well as a novel approach for automatic model-based correction of classification errors. In total, we analyzed 4,400 real image sequences, covering observation periods of around 120 h each. We performed an extensive quantitative evaluation, which showed that our approach yields high accuracies of 92.2% for segmentation, 98.2% for tracking, and 86.5% for

  6. Guidance for classification of residues from combustion and incineration in accordance with the Swedish ordinance for waste; Vaegledning foer klassificering av foerbraenningsrester enligt Avfallsfoerordningen

    Energy Technology Data Exchange (ETDEWEB)

    Adler, Peter [AaF Energi och Miljoe AB, Stockholm (Sweden); Haglund, Jan-Erik [Soederenergi AB, Stockholm (Sweden); Sjoeblom, Rolf [Tekedo AB, Nykoeping (Sweden)


    A new ordinance for waste came into force in Sweden on the first of January 2002, replacing some previous ordinances. The new ordinance is based on certain EU directives and contains amongst other things new rules regarding how certain streams of waste are to be classified into hazardous waste and non-hazardous waste. In a number of cases, the classification is to be made according to whether or not the waste possesses one or more of a number o properties H1 - H14, i e if the waste contains hazardous substances. The new rules are based on the regulation that exists for chemical substances and preparations. When attempts have been made to use these new rules in practice - e g for residues from incineration and combustion - it has become apparent that they are very difficult or even impossible to apply. The primary reason for this is that the residues contain a very large number (thousands) of substances which would have to be analysed and for which the hazard would have to be assessed correctly in accordance with the criteria for the properties (H4 - H8 and H10 - H11). Furthermore, some of the properties listed in the ordinance for waste lack criteria for assessment of hazard. These are H13 (can give rise to another substance which may be hazardous, e g leachate) and H14 (hazardous to the environment). Moreover, there are significant differences between the Ordinance of waste and the regulation of the National Chemicals Inspectorate. It is on the latter that the rules in the Ordinance of waste are based, and this is also the cause of many of the questions and of the uncertainties in the classification. In the present report, a method is developed and described for classification of residues from combustion and incineration. The method is to be applicable in practice without compromising environmental and health aspects. As a part of the present work, a compilation of content and alteration of chemical substances in is carried out. In another chapter, the experience

  7. Waste Reduction Model (United States)

    To help solid waste planners and organizations track/report GHG emissions reductions from various waste management practices. To assist in calculating GHG emissions of baseline and alternative waste management practices and provide the history of WARM.

  8. Muscle and intensity based hamstring exercise classification in elite female track and field athletes: implications for exercise selection during rehabilitation

    Directory of Open Access Journals (Sweden)

    Tsaklis P


    Full Text Available Panagiotis Tsaklis,1,2 Nikos Malliaropoulos,3–5,10 Jurdan Mendiguchia,6 Vasileios Korakakis,7–9 Kyriakos Tsapralis,11 Debasish Pyne,5 Peter Malliaras101Department of Physiotherapy, Laboratory of Biomechanics and Ergonomics, Alexander Technological Educational Institute of Thessaloniki, Thessaloniki, Greece; 2Department of Mechanical Engineering, Bioengineering, Massachusetts Institute of Technology, Cambridge, MA, USA; 3National Track and Field Centre, Sports Injury Clinic, Sports Medicine Clinic of SEGAS, 4Thessaloniki Sports Medicine Clinic, Thessaloniki, Greece; 5Rheumatology Department, Sports Medicine Clinic, Mile End Hospital, London, UK; 6Department of Physical Therapy, Zentrum Rehabilitation and Performance Center, Pamplona, Spain; 7Aspetar, Orthopaedic and Sports Medicine Hospital, Doha, Qatar; 8Faculty of Physical Education and Sport Science, University of Thessaly, Trikala, 9Hellenic Orthopaedic Manipulative Therapy Diploma, Athens, Greece; 10Centre for Sports and Exercise Medicine, Queen Mary, University of London, London, UK; 11K Tsapralis Isokinetic Medical Group, Bologna, ItalyBackground: Hamstring injuries are common in many sports, including track and field. Strains occur in different parts of the hamstring muscle but very little is known about whether common hamstring loading exercises specifically load different hamstring components. The purpose of this study was to investigate muscle activation of different components of the hamstring muscle during common hamstring loading exercises.Methods: Twenty elite female track and field athletes were recruited into this study, which had a single-sample, repeated-measures design. Each athlete performed ten hamstring loading exercises, and an electromyogram (EMG was recorded from the biceps femoris and semitendinosus components of the hamstring. Hamstring EMG during maximal voluntary isometric contraction (MVIC was used to normalize the mean data across ten repetitions of each

  9. A proposal for a test method for assessment of hazard property HP 12 ("Release of an acute toxic gas") in hazardous waste classification - Experience from 49 waste. (United States)

    Hennebert, Pierre; Samaali, Ismahen; Molina, Pauline


    A stepwise method for assessment of the HP 12 is proposed and tested with 49 waste samples. The hazard property HP 12 is defined as "Release of an acute toxic gas": waste which releases acute toxic gases (Acute Tox. 1, 2 or 3) in contact with water or an acid. When a waste contains a substance assigned to one of the following supplemental hazards EUH029, EUH031 and EUH032, it shall be classified as hazardous by HP 12 according to test methods or guidelines (EC, 2014a, 2014b). When the substances with the cited hazard statement codes react with water or an acid, they can release HCl, Cl 2 , HF, HCN, PH 3 , H 2 S, SO 2 (and two other gases very unlikely to be emitted, hydrazoic acid HN 3 and selenium oxide SeO 2 - a solid with low vapor pressure). Hence, a method is proposed:For a set of 49 waste, water addition did not produce gas. Nearly all the solid waste produced a gas in contact with hydrochloric acid in 5 min in an automated calcimeter with a volume >0.1L of gas per kg of waste. Since a plateau of pressure is reached only for half of the samples in 5 min, 6 h trial with calorimetric bombs or glass flasks were done and confirmed the results. Identification of the gases by portable probes showed that most of the tested samples emit mainly CO 2 . Toxic gases are emitted by four waste: metallic dust from the aluminum industry (CO), two air pollution control residue of industrial waste incinerator (H 2 S) and a halogenated solvent (organic volatile(s) compound(s)). HF has not been measured in these trials started before the present definition of HP 12. According to the definition of HP 12, only the H 2 S emission of substances with hazard statement EUH031 is accounted for. In view of the calcium content of the two air pollution control residue, the presence of calcium sulphide (EUH031) can be assumed. These two waste are therefore classified potentially hazardous for HP 12, from a total of 49 waste. They are also classified as hazardous for other properties (HP 7

  10. Tracking the Global Distribution of Persistent Organic Pollutants Accounting for E-Waste Exports to Developing Regions. (United States)

    Breivik, Knut; Armitage, James M; Wania, Frank; Sweetman, Andrew J; Jones, Kevin C


    Elevated concentrations of various industrial-use Persistent Organic Pollutants (POPs), such as polychlorinated biphenyls (PCBs), have been reported in some developing areas in subtropical and tropical regions known to be destinations of e-waste. We used a recent inventory of the global generation and exports of e-waste to develop various global scale emission scenarios for industrial-use organic contaminants (IUOCs). For representative IUOCs (RIUOCs), only hypothetical emissions via passive volatilization from e-waste were considered whereas for PCBs, historical emissions throughout the chemical life-cycle (i.e., manufacturing, use, disposal) were included. The environmental transport and fate of RIUOCs and PCBs were then simulated using the BETR Global 2.0 model. Export of e-waste is expected to increase and sustain global emissions beyond the baseline scenario, which assumes no export. A comparison between model predictions and observations for PCBs in selected recipient regions generally suggests a better agreement when exports are accounted for. This study may be the first to integrate the global transport of IUOCs in waste with their long-range transport in air and water. The results call for integrated chemical management strategies on a global scale.

  11. Discrimination and classification of tobacco wastes by identification and quantification of polyphenols with LC–MS/MS

    Directory of Open Access Journals (Sweden)



    Full Text Available The chemical composition of polyphenols in tobacco waste was identified by HPLC-PDA–ESI/MS/MS and the contents of chlorogenic acids and rutin in 10 varieties of tobacco wastes were determined by HPLC–UV. The relationships between the contents of active polyphenols and the varieties of tobacco wastes were interpreted by hierarchical cluster analysis (HCA and principal component analysis (PCA. The results showed that 15 polyphenols were identified in a methanolic extract of dried tobacco waste. The tobacco wastes were characterized by high levels of chlorogenic acids (3-CQA, 5-CQA, and 4-CQA and rutin; their ranges in the 10 tobacco varieties were 0.116–0.196, 0.686–1.781, 0.094–0.192, and 0.413–0.998 %, respectively. According to multivariate statistics models, two active compound variables can be considered important for the discrimination of the varieties of tobacco wastes: chlorogenic acids and rutin. Consequently, samples of 10 tobacco varieties were characterized into three groups by HCA based on the PCA pattern. In conclusion, tobacco waste could be used as a new pharmaceutical material for the production of natural chlorogenic acids and rutin in the ethnopharmacological industry.

  12. Tracking the sources of polybrominated diphenyl ethers in birds: Foraging in waste management facilities results in higher DecaBDE exposure in males

    Energy Technology Data Exchange (ETDEWEB)

    Gentes, Marie-Line, E-mail: [Centre de recherche en toxicologie de l’environnement (TOXEN), Département des sciences biologiques, Université du Québec à Montréal, P.O. Box 8888, Station Centre-ville, Montreal, QC, Canada H3C 3P8 (Canada); Mazerolle, Marc J., E-mail: [Centre for Forest Research, Université du Québec en Abitibi-Témiscamingue, 445 boulevard de l’Université, Rouyn-Noranda, QC, Canada J9X 5E9 (Canada); Giroux, Jean-François, E-mail: [Groupe de recherche en écologie comportementale et animale, Département des sciences biologiques, Université du Québec à Montréal, P.O. Box 8888, Station Centre-ville, Montreal, QC, Canada H3C 3P8 (Canada); Patenaude-Monette, Martin [Groupe de recherche en écologie comportementale et animale, Département des sciences biologiques, Université du Québec à Montréal, P.O. Box 8888, Station Centre-ville, Montreal, QC, Canada H3C 3P8 (Canada); and others


    Differences in feeding ecology are now recognized as major determinants of inter-individual variations in contaminant profiles of free-ranging animals, but exceedingly little attention has been devoted to the role of habitat use. Marked inter-individual variations and high levels of polybrominated diphenyl ethers (PBDEs) (e.g., DecaBDE) have previously been documented in ring-billed gulls (Larus delawarensis) breeding in a colony near Montreal (QC, Canada). However, the environmental sources of these compounds, and thus the reasons causing these large inter-individual variations remain unidentified. In the present study, we used GPS-based telemetry (±5 to 10 m precision) to track ring-billed gulls from this colony to reconstruct their movements at the landscape level. We related habitat use of individual gulls (n=76) to plasma concentrations (ng/g ww) and relative contributions (percentages) to Σ{sub 38}PBDEs of major congeners in the internationally restricted PentaBDE and current-use DecaBDE mixtures. Male gulls that visited waste management facilities (WMFs; i.e., landfills, wastewater treatment plants and related facilities; 25% of all GPS-tracked males) exhibited greater DecaBDE (concentrations and percentages) and lower PentaBDE (percentages) relative to those that did not. In contrast, no such relationships were found in females. Moreover, in males, DecaBDE (concentrations and percentages) increased with percentages of time spent in WMFs (i.e., ~5% of total foraging time), while PentaBDE (percentages) decreased. No relationships between percentages of time spent in other habitats (i.e., urban areas, agriculture fields, and St. Lawrence River) were found in either sex. These findings suggest that animals breeding in the vicinity of WMFs as well as mobile species that only use these sites for short stopovers to forage, could be at risk of enhanced DecaBDE exposure. - Highlights: • The study was conducted on breeding gulls with high levels of flame

  13. In situ quantification and tracking of volatile organic compounds with a portable mass spectrometer in tropical waste and urban sites. (United States)

    Plocoste, Thomas; Jacoby-Koaly, Sandra; Petit, Rose-Helen; Molinié, Jack; Roussas, André


    This study outlines an experimental method for landfill volatile organic compounds (VOCs) characterization by means of a portable time-of-flight mass spectrometer in an insular tropical environment. The concentrations of six VOCs, three aromatic and three chlorinated compounds, frequently identified in landfill gas plume were determined in the main municipal solid waste of Guadeloupe archipelago and its surrounding areas (in the Leeward Islands). Measurements were carried out for various stages of waste degradation. Without mechanical forcing on the waste piles, the results for aromatic and chlorinated compounds showed much higher concentrations at covered waste. Benzene, toluene and ethylbenzene were easily detected by the portable mass spectrometer in the air matrix with concentrations significantly greater than the equipment limit of detection (LOD) estimates. Trichloroethylene is not often measured by the mass spectrometer and very few calculated concentrations reach the instrument LOD. For sites near the landfill, using the sum trichloroethylene + tetrachlororethylene as tracer, it was observed that the most affected locations are under the wind of the landfill plume. Moreover, under certain atmospheric conditions, most of the surrounding area, downwind and upwind, can undergo an increase of the tracer concentration levels, as shown in the paper during a dust outbreak.

  14. Assessment of the Fluorescence Spectra Characteristics of Dissolved Organic Matter Derived from Organic Waste Composting Based on Projection Pursuit Classification (PPC). (United States)

    Wei, Zi-min; Wang, Xing-lei; Pan, Hong-wei; Zhao, Yue; Xie, Xin-yu; Zhao, Yi; Zhang, Lin-xue; Zhao, Tao-zhi


    The characteristics of fluorescence spectra of dissolved organic matter (DOM) derived from composting is one of the key ways to assess the compost maturity. However, the existing methods mainly focus on the qualitative description for the humification degree of compost. In this paper, projection pursuit classification (PPC) was conducted to quantitative assess the grades of compost maturity, based on the characteristics of fluorescence spectra of DOM. Eight organic wastes (chicken manure, swine manure, kitchen waste, lawn waste, fruits and vegetables waste, straw, green waste, and municipal solid waste) composting were conducted, the germination percentage (GI) and fluorescence spectra of DOM were measured during composting. Statistic analysis with all fluorescence parameters of DOM indicated that I436/I383 (a ratio between the fluorescence intensities at 436 and 383 nm in excitation spectra), FLR (an area ratio between fulvic-like region from 308 to 363 nm and total region in emission spectra), P(HA/Pro) (a regional integration ratio between humic acid-like region to protein-like region in excitation emission matrix (EEM) spectra), A4/A1 (an area ratio of the last quarter to the first quarter in emission spectra), r(A,C) (a ratio between the fluorescence intensities of peak A and peak C in EEM spectra) were correlated with each other (p 80%), better degree of compost maturity (II, 60% < GI < 80%), maturity (III, 50% < GI < 60%), and immaturity (IV, GI < 50%) were divided according the GI value during composting. The corresponding fluorescence parameter values were calculated at each degrade of compost maturity. Then the projection values were calculated based on PPC considering the above fluorescence parameter values. The projection value was 2.01 - 2.22 for I grade, 1.21 - 2.0 for II grade, 0.57 - 1.2 for III grade, and 0.10 - 0.56 for IV grade. Model validation was then carried out with composts samples, the results indicated that the simulated values were

  15. Comprehensive planning for classification and disposal of solid waste at the industrial parks regarding health and environmental impacts. (United States)

    Hashemi, Hassan; Pourzamani, Hamidreza; Rahmani Samani, Bahareh


    The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM) is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it.

  16. Radioactive waste management; Gerencia de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)



    This eighth chapter presents the radioactive wastes and waste disposal; classification of radioactive wastes; basis requests of the radioactive waste management; conditions for a radioactive waste disposal; registers and inventories; transport of radioactive wastes from a facility to another and the radioactive waste management plan.

  17. Classification of waste wood treated with chromated copper arsenate and boron/fluorine preservatives; Classificacao de residuos de madeira tratada com preservativos a base de arseniato de cobre cromatado e de boro/fluor

    Energy Technology Data Exchange (ETDEWEB)

    Ferrarini, Suzana Frighetto; Santos, Heldiane Souza dos; Miranda, Luciana Gampert; Azevedo, Carla M.N.; Pires, Marcal J.R., E-mail: [Faculdade de Quimica, Pontificia Universidade Catolica do Rio Grande do Sul, Porto Alegre, RS (Brazil); Maia, Sandra Maria [Instituto de Quimica, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS (Brazil)


    Classification of waste wood treated with chromated copper arsenate (CCA) and boron/fluorine preservatives, according to NBR 10004, was investigated. The leaching test (ABNT NBR 10005) for As and Cr, and solubilization test (ABNT NBR 10006) for F, were applied to out-of-service wooden poles. Concentrations of As and Cr in leachates were determined by ICP-MS and of F by ESI. Values for As were higher than 1 mg L{sup -1} classifying the waste as hazardous material (Class I) whereas values for F (> 1.5 mg L{sup -1}) were non-hazardous but indicated non-inert material (Class IIA). (author)

  18. Verification of the Accountability Method as a Means to Classify Radioactive Wastes Processed Using THOR Fluidized Bed Steam Reforming at the Studsvik Processing Facility in Erwin, Tennessee, USA - 13087

    Energy Technology Data Exchange (ETDEWEB)

    Olander, Jonathan [Studsvik Processing Facility Erwin, 151 T.C. Runnion Rd., Erwin, TN 37650 (United States); Myers, Corey [Studsvik, Inc., 5605 Glenridge Drive, Suite 705, Atlanta, GA 30342 (United States)


    Studsviks' Processing Facility Erwin (SPFE) has been treating Low-Level Radioactive Waste using its patented THOR process for over 13 years. Studsvik has been mixing and processing wastes of the same waste classification but different chemical and isotopic characteristics for the full extent of this period as a general matter of operations. Studsvik utilizes the accountability method to track the movement of radionuclides from acceptance of waste, through processing, and finally in the classification of waste for disposal. Recently the NRC has proposed to revise the 1995 Branch Technical Position on Concentration Averaging and Encapsulation (1995 BTP on CA) with additional clarification (draft BTP on CA). The draft BTP on CA has paved the way for large scale blending of higher activity and lower activity waste to produce a single waste for the purpose of classification. With the onset of blending in the waste treatment industry, there is concern from the public and state regulators as to the robustness of the accountability method and the ability of processors to prevent the inclusion of hot spots in waste. To address these concerns and verify the accountability method as applied by the SPFE, as well as the SPFE's ability to control waste package classification, testing of actual waste packages was performed. Testing consisted of a comprehensive dose rate survey of a container of processed waste. Separately, the waste package was modeled chemically and radiologically. Comparing the observed and theoretical data demonstrated that actual dose rates were lower than, but consistent with, modeled dose rates. Moreover, the distribution of radioactivity confirms that the SPFE can produce a radiologically homogeneous waste form. The results of the study demonstrate: 1) the accountability method as applied by the SPFE is valid and produces expected results; 2) the SPFE can produce a radiologically homogeneous waste; and 3) the SPFE can effectively control the

  19. Waste management and chemical inventories

    Energy Technology Data Exchange (ETDEWEB)

    Gleckler, B.P.


    This section of the 1994 Hanford Site Environmental Report summarizes the classification and handling of waste at the Hanford Site. Waste produced at the Hanford Site is classified as either radioactive, nonradioactive, or mixed waste. Radioactive wastes are further categorized as transuranic, high-level, and low-level. Mixed waste may contain both radioactive and hazardous nonradioactive substances. This section describes waste management practices and chemical inventories at the site.

  20. Radioactive Waste Streams: Waste Classification for Disposal (United States)


    packaged (e.g., metal drums, wood or metal boxes) and retrievably stored in above-ground facilities such as earth-mounded berms, concrete culverts...uranium fission, and from reactor cooling water using boron as a soluble control absorber.40 The radionuclides carbon- 14, nickel-53, nickel-59, and...naturally occurring concentrations. Some TENORM may be found in certain consumer products, as well as fly ash from coal-fired power plants

  1. Understanding radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Murray, R.L.


    This document contains information on all aspects of radioactive wastes. Facts are presented about radioactive wastes simply, clearly and in an unbiased manner which makes the information readily accessible to the interested public. The contents are as follows: questions and concerns about wastes; atoms and chemistry; radioactivity; kinds of radiation; biological effects of radiation; radiation standards and protection; fission and fission products; the Manhattan Project; defense and development; uses of isotopes and radiation; classification of wastes; spent fuels from nuclear reactors; storage of spent fuel; reprocessing, recycling, and resources; uranium mill tailings; low-level wastes; transportation; methods of handling high-level nuclear wastes; project salt vault; multiple barrier approach; research on waste isolation; legal requiremnts; the national waste management program; societal aspects of radioactive wastes; perspectives; glossary; appendix A (scientific American articles); appendix B (reference material on wastes). (ATT)

  2. Slab track


    Golob, Tina


    The last 160 years has been mostly used conventional track with ballasted bed, sleepers and steel rail. Ensuring the high speed rail traffic, increasing railway track capacities, providing comfortable and safe ride as well as high reliability and availability railway track, has led to development of innovative systems for railway track. The so-called slab track was first built in 1972 and since then, they have developed many different slab track systems around the world. Slab track was also b...

  3. A data set for evaluating the performance of multi-class multi-object video tracking


    Chakraborty, Avishek; Stamatescu, Victor; Wong, Sebastien C.; Wigley, Grant; Kearney, David


    One of the challenges in evaluating multi-object video detection, tracking and classification systems is having publically available data sets with which to compare different systems. However, the measures of performance for tracking and classification are different. Data sets that are suitable for evaluating tracking systems may not be appropriate for classification. Tracking video data sets typically only have ground truth track IDs, while classification video data sets only have ground tru...

  4. Methodology for classification of the H14 criterion according to the directive 2008/98/EC on waste. Proposal of a biotest battery for the classification of hazardous waste. Ecotoxicological testing with bacterium, algae, crustacean and fish embryo; Metodik foer klassificering av H14-kriteriet i Avfallsfoerordningen. Foerslag till biotestbatteri foer klassificering av farligt avfall. Ekotoxikologisk testning med bakterie, alg, kraeftdjur och fiskembryo

    Energy Technology Data Exchange (ETDEWEB)

    Stiernstroem, Sara; Hemstroem, Kristian; Wik, Ola; Carlsson, Gunnar; Breitholtz, Magnus


    Waste, including ashes that can cause ecotoxicological effects, should be classified under criterion H-14 in the Directive on Waste 2008/98/EC. The complex nature of ash production and the fact that it has a complex chemical composition makes ecotoxicological hazard and risk assessment of ashes based on mere chemical analysis insufficient. Biological test systems are thus indispensable tools to support the ecotoxicological characterisation and classification of the properties of ashes. The objectives of this study were (1) to develop a leaching procedure suitable for preparation of water extracts for ecotoxicity testing, and (2) to evaluate an ecotoxicological test battery for the characterisation of ashes. A leaching procedure developed for organic compounds was assumed to be more realistic than existing standard methods for preparation of eluates for ecotoxic tests from complex matrices. A modified version of a recirculation column test, the ER-H method, developed for leaching of nonvolatile organic compounds and validated for PAHs and CPs, was used in this study and compared with the batch test EN 14735 (Characterization of waste - Preparation of waste samples for ecotoxicity tests). The ecotoxicological test battery included species representing different trophic levels; the bacterium Vibrio fisheri, a growth inhibition test with the micro algae Pseudokirchneriella subcapitata formerly known as Selenastrum capricornutum, a larval development test with the copepod Nitocra spinipes and an embryo toxicity test with sebra fish (Danio rerio). These test species show a relatively low sensitivity to elevated salinity levels. This test battery can be used to test a wide variety of matrices (e.g. single chemicals, complex effluents, eluates and sediments), and therefore offers flexible solutions for testing of leachates with differing and difficult properties. Both the ashes and their leachates were also analyzed chemically for organic and inorganic substances. All the

  5. A concept for classification of optimal breathing pattern for use in radiotherapy tracking, based on respiratory tumor kinematics and minimum jerk analysis. (United States)

    Anetai, Yusuke; Sumida, Iori; Takahashi, Yutaka; Yagi, Masashi; Mizuno, Hirokazu; Ota, Seiichi; Suzuki, Osamu; Tamari, Keisuke; Seo, Yuji; Ogawa, Kazuhiko


    During radiotherapy, maintaining the patient in a relaxed and comfortable state helps ensure respiratory regularity and reproducibility, thereby supports accurate respiratory tracking/gating treatment. Criteria to evaluate respiratory naturalness, regularity, and phase robustness are therefore needed to aid for the treatment system numerically and medical observers visually. This study introduces a new concept of respiratory tumor kinematics that describes the trajectory of tumor motion with respiration, leading to the minimum jerk theory. Using this theory, this study proposes novel respiratory criteria for respiratory naturalness, regularity, and phase robustness. According to respiratory tumor kinematics, tumor motion follows the minimum curvature/jerk trajectory in 4D spacetime. Using this theory, the following three respiratory criteria are proposed: (1) respiratory naturalness Us, the residual sum of the squared difference between the normalized average free respiratory wave (single inhalation/exhalation averaged over each 10 phases) and the normalized minimum jerk theoretical respiratory wave; (2) respiratory regularity Cj16, the cumulative jerk squared cost function sampling every 0.2 s with a peak adjustment coefficient, 16; and (3) respiratory phase robustness (LΔ), a second-order partial differential in the respiratory position for regarded Cj16 as the respiratory position function. To verify these respiratory criteria, values obtained from CyberKnife tracking marker log data for 15 patients were compared with regard to the correlation error between the correlation model and the imaged tumor position, as well as with the number of remodels. The Cj16 growth curve was also compared between 15 patients and 15 healthy volunteers. In the 15 patients, data with Us respiratory naturalness) and higher Cj16(60 s) values (less respiratory regularity) demonstrated more than 3 mm average/5 mm maximum correlation errors and an increased number of remodels. The data

  6. Are Cape gannets dependent upon fishery waste? A multi‐scale analysis using seabird GPS‐tracking, hydro‐acoustic surveys of pelagic fish and vessel monitoring systems

    National Research Council Canada - National Science Library

    Tew Kai, Emilie; Benhamou, Simon; Lingen, Carl D; Coetzee, Janet C; Pichegru, Lorien; Ryan, Peter G; Grémillet, David; Votier, Steve


    ... at‐sea surveys, and fishing effort by the two main south African fisheries (purse seiners that compete with seabirds for pelagic fish, and demersal trawlers that process fish at sea and discharge fish waste...

  7. Waste Generation Overview Refresher, Course 21464

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    This course, Waste Generation Overview Refresher (COURSE 21464), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to- grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL.

  8. An Efficient, Scalable Time-Frequency Method for Tracking Energy Usage of Domestic Appliances Using a Two-Step Classification Algorithm

    Directory of Open Access Journals (Sweden)

    Paula Meehan


    Full Text Available Load monitoring is the practice of measuring electrical signals in a domestic environment in order to identify which electrical appliances are consuming power. One reason for developing a load monitoring system is to reduce power consumption by increasing consumers’ awareness of which appliances consume the most energy. Another example of an application of load monitoring is activity sensing in the home for the provision of healthcare services. This paper outlines the development of a load disaggregation method that measures the aggregate electrical signals of a domestic environment and extracts features to identify each power consuming appliance. A single sensor is deployed at the main incoming power point, to sample the aggregate current signal. The method senses when an appliance switches ON or OFF and uses a two-step classification algorithm to identify which appliance has caused the event. Parameters from the current in the temporal and frequency domains are used as features to define each appliance. These parameters are the steady-state current harmonics and the rate of change of the transient signal. Each appliance’s electrical characteristics are distinguishable using these parameters. There are three Types of loads that an appliance can fall into, linear nonreactive, linear reactive or nonlinear reactive. It has been found that by identifying the load type first and then using a second classifier to identify individual appliances within these Types, the overall accuracy of the identification algorithm is improved.

  9. Tracking quicksilver: estimation of mercury waste from consumer products and subsequent verification by analysis of soil, water, sediment, and plant samples from the Cebu City, Philippines, landfill. (United States)

    Buagas, Dale Jo B; Megraso, Cristi Cesar F; Namata, John Darwin O; Lim, Patrick John Y; Gatus, Karen P; Cañete, Aloysius M L


    Source attribution of mercury (Hg) is critical for policy development to minimize the impact of Hg in wastes. Mercury content of consumer products and its subsequent release into the waste stream of Cebu City, Philippines, is estimated through surveys that employed validated, enumerator-administered questionnaires. Initially, a citywide survey (n = 1636) indicates that each household annually generates 1.07 ppm Hg (i.e., mg Hg/kg waste) and that linear and compact fluorescent lamps (17.2 %) and thermometers (52.1 %) are the major sources of Hg. A subsequent survey (n = 372) in the vicinity of the city's municipal solid waste landfill shows that residents in the area annually generate 0.38 ppm Hg per household, which is less than the citywide mean; surprisingly though, less affluent respondents living closer to the landfill site reported more Hg from thermometers and sphygmomanometers. Analysis of collected soil (0.238 ppm), leachate water (6.5 ppb), sediment (0.109 ppm), and three plants (0.393 to 0.695 ppm) shows no significant variation throughout five stations in and around the landfill site, although the period of collection is significant for soil (P = 0.001) and Cenchrus echinatus (P = 0.016). Detected Hg in the landfill is considerably less than the annual estimated release, indicating that there is minimal accumulation of Hg in the soil or in plants. As a result of this project, a policy brief has been provided to the Cebu City council in aid of hazardous waste legislation.

  10. Waste Generation Overview, Course 23263

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    This course, Waste Generation Overview Live (COURSE 23263), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to-grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL. When you have completed this course, you will be able to recognize federal, state, and LANL environmental requirements and their impact on waste operations; recognize the importance of the cradle-to-grave waste management process; identify the roles and responsibilities of key LANL waste management personnel (e.g., Waste Generator, Waste Management Coordinator, Waste Stream Profile approver, and Waste Certification Official); characterize a waste stream to determine whether it meets the definition of a hazardous waste, as well as characterize the use and minimum requirements for use of acceptable knowledge (AK) for waste characterization and waste compatibility documentation requirements; and identify the requirements for setting up and managing temporary waste accumulation areas.

  11. Quantifying solid waste and recycling employment in Florida, USA: Trends in public and private sectors. (United States)

    Park, Sunjoo; Yi, Hongtao; Feiock, Richard C


    Measuring and tracking the numbers of jobs in solid waste management and recycling industries over time provide basic data to inform decision makers about the important role played by this sector in a state or region's 'green economy'. This study estimates the number of people employed in the solid waste and recycling industry from 1989 through 2011 in the state of Florida (USA), applying a classification scheme based on the Standard Industrial Code (SIC) and utilizing the National Establishment Time Series (NETS) database. The results indicate that solid waste and recycling jobs in the private sector steadily increased from 1989 to 2011, whereas government employment for solid waste management fluctuated over the same period. © The Author(s) 2015.

  12. Risk assessment and quality improvement of liquid waste management in Taiwan University chemical laboratories. (United States)

    Ho, Chao-Chung; Chen, Ming-Shu


    The policy of establishing new universities across Taiwan has led to an increase in the number of universities, and many schools have constructed new laboratories to meet students' academic needs. In recent years, there has been an increase in the number of laboratory accidents from the liquid waste in universities. Therefore, how to build a safety system for laboratory liquid waste disposal has become an important issue in the environmental protection, safety, and hygiene of all universities. This study identifies the risk factors of liquid waste disposal and presents an agenda for practices to laboratory managers. An expert questionnaire is adopted to probe into the risk priority procedures of liquid waste disposal; then, the fuzzy theory-based FMEA method and the traditional FMEA method are employed to analyze and improve the procedures for liquid waste disposal. According to the research results, the fuzzy FMEA method is the most effective, and the top 10 potential disabling factors are prioritized for improvement according to the risk priority number (RNP), including "Unclear classification", "Gathering liquid waste without a funnel or a drain pan", "Lack of a clearance and transport contract", "Liquid waste spill during delivery", "Spill over", "Decentralized storage", "Calculating weight in the wrong way", "Compatibility between the container material and the liquid waste", "Lack of dumping and disposal tools", and "Lack of a clear labels for liquid waste containers". After tracking improvements, the overall improvement rate rose to 60.2%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Online Tracking (United States)

    ... for other purposes, such as research, measurement, and fraud prevention. Mobile browsers work much like traditional web ... users’ Do Not Track preferences. Can I block online tracking? Consumers can learn about tracker-blocking browser ...

  14. Particle tracking

    CERN Document Server

    Safarík, K; Newby, J; Sørensen, P


    In this lecture we will present a short historical overview of different tracking detectors. Then we will describe currently used gaseous and silicon detectors and their performance. In the second part we will discuss how to estimate tracking precision, how to design a tracker and how the track finding works. After a short description of the LHC the main attention is drawn to the ALICE experiment since it is dedicated to study new states in hadronic matter at the LHC. The ALICE tracking procedure is discussed in detail. A comparison to the tracking in ATLAS, CMS and LHCb is given. (5 refs).

  15. Timber tracking

    DEFF Research Database (Denmark)

    Düdder, Boris; Ross, Omry


    Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

  16. 3D asynchronous particle tracking in single and dual continuum matrix-fractures. Application to nuclear waste storage; Modelisation 3D du transport particulaire asynchrone en simple et double continuum matrice-fractures: application au stockage de dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Lam, M.Ph


    This PhD research was conducted as a collaboration between Laboratoire National d'Hydraulique et Environnement (LNHE) from EDF R and D and the Institut de Mecanique des Fluides de Toulouse (IMFT) in the frame of a CIFRE contract. This PhD thesis aims at providing LNHE a reliable numerical model to study the feasibility of a nuclear waste storage in deep geological structures. The main focus of the thesis is put on developing and implementing a Random Walk Particle Method (RWPM) to model contaminant transport in 3D heterogeneous and fractured porous media. In its first part, the report presents the Lagrangian particle tracking method used to model transport in heterogeneous media with a direct high resolution approach. The solute plume is discretized into concentration packets: particles. The model tracks each particle based on a time-explicit displacement algorithm according to an advective component and a diffusive random component. The method is implemented on a hydraulic model discretized on a 3D unstructured tetrahedral finite element mesh. We focus on techniques to overcome problems due to the discontinuous transport parameters and the unstructured mesh. First, we introduce an asynchronous time-stepping approach to deal with the numerical and overshoot errors that occur with conventional RWPM. Then, a filtering method is applied to smooth discontinuous transport parameters (pre-processing). Finally, once the particle displacements are computed, we propose several filtering and sampling methods to obtain concentrations from particle positions (post-processing). Applications of these methods are presented with cases of tracer advection-dispersion in homogeneous and heterogeneous media. For dense fracture networks, direct high resolution methods are very time consuming and need a lot of computational resources. So, as an alternative to the discrete approach, a dual-continuum representation is used, in the second part of the report, to describe the porous

  17. Fast Compressive Tracking. (United States)

    Zhang, Kaihua; Zhang, Lei; Yang, Ming-Hsuan


    It is a challenging task to develop effective and efficient appearance models for robust object tracking due to factors such as pose variation, illumination change, occlusion, and motion blur. Existing online tracking algorithms often update models with samples from observations in recent frames. Despite much success has been demonstrated, numerous issues remain to be addressed. First, while these adaptive appearance models are data-dependent, there does not exist sufficient amount of data for online algorithms to learn at the outset. Second, online tracking algorithms often encounter the drift problems. As a result of self-taught learning, misaligned samples are likely to be added and degrade the appearance models. In this paper, we propose a simple yet effective and efficient tracking algorithm with an appearance model based on features extracted from a multiscale image feature space with data-independent basis. The proposed appearance model employs non-adaptive random projections that preserve the structure of the image feature space of objects. A very sparse measurement matrix is constructed to efficiently extract the features for the appearance model. We compress sample images of the foreground target and the background using the same sparse measurement matrix. The tracking task is formulated as a binary classification via a naive Bayes classifier with online update in the compressed domain. A coarse-to-fine search strategy is adopted to further reduce the computational complexity in the detection procedure. The proposed compressive tracking algorithm runs in real-time and performs favorably against state-of-the-art methods on challenging sequences in terms of efficiency, accuracy and robustness.

  18. Tracking FEMA


    Leskanic, Tyler; Kays, Kevin; Maier, Emily; Cannon, Seth


    The zip archive attached to this project is the compressed TrackingFEMA Git repository. It contains the CMS (RefineryCMS - Rails), processing scripts, as well as visualization sample code. The processing scripts are in a folder called TrackingFEMAProcessing. The visualizations are contained in Visualization. The rest of the rails files are contained within the usual Ruby on Rails file system structure. The finished product is a website visualizing the efforts of disaster response organizat...

  19. Waste inspection tomography (WIT)

    Energy Technology Data Exchange (ETDEWEB)

    Bernardi, R.T. [Bio-Imaging Research, Inc., Lincolnshire, IL (United States)


    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  20. Trabajo, asociatividad y acción colectiva: el caso de las cooperativas de recuperadores urbanos Work, associativism and collective action: the case of the recovery and classification of solid waste cooperatives

    Directory of Open Access Journals (Sweden)

    Johanna Maldovan Bonelli


    Full Text Available El presente artículo analiza el proceso de consolidación de cooperativas de recuperación y clasificación de residuos sólidos urbanos de la Ciudad de Buenos Aires como un actor diferenciado en el circuito productivo del reciclaje que, a partir del despliegue de una estrategia colectiva basada en la conformación de organizaciones asociativas ha logrado mejorar sus condiciones laborales e insertarse en el sistema público de higiene urbana. Este proceso es presentado en un recorrido de tres momentos establecidos a partir de la conformación de las organizaciones cooperativas y su relación y formas de articulación con las políticas públicas referidas a la actividad.This article analyzes the consolidation process of the recovery and classification of solid waste cooperatives as a distinctive actor in the recycling production chain in Buenos Aires City. I analize how the deployment of a collective strategy based on associative organizations has been a way to improve working conditions and to integrate themselves into the urban hygiene public system. This process is presented in three different moments established from the conformation of cooperative organizations and their interaction with the public policies related to the activity.

  1. Waste Sites - Municipal Waste Operations (United States)

    NSGIC Education | GIS Inventory — A Municipal Waste Operation is a DEP primary facility type related to the Waste Management Municipal Waste Program. The sub-facility types related to Municipal Waste...

  2. Tracking Information

    NARCIS (Netherlands)

    van Benthem, J.; Bimbó, K.


    Depending on a relevant task at hand, information can be represented at different levels, less or more detailed, each supporting its own appropriate logical languages. We discuss a few of these levels and their connections, and investigate when and how information growth at one level can be tracked

  3. Tracking Costs (United States)

    Erickson, Paul W.


    Even though there's been a slight reprieve in energy costs, the reality is that the cost of non-renewable energy is increasing, and state education budgets are shrinking. One way to keep energy and operations costs from overshadowing education budgets is to develop a 10-year energy audit plan to eliminate waste. First, facility managers should…

  4. Waste Management Information System (WMIS) User Guide

    Energy Technology Data Exchange (ETDEWEB)

    R. E. Broz


    This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

  5. Tracking inside the ALICE Inner Tracking System

    CERN Document Server

    Badalà, A; Lo Re, G; Palmeri, A; Pappalardo, G S; Pulvirenti, A; Riggi, F


    One of the main purposes of the ALICE Inner Tracking System (ITS) is to improve the resolution of the track parameters found in the main ALICE tracker detector, the Time Projector Chamber (TPC). Some results about tracking efficiency and resolution of track parameters obtained with a tracking code, based on the Kalman filter algorithm are presented.

  6. WCATS: Waste Documentation, Course No. 8504

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Sandy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    This course was developed for individuals at Los Alamos National Laboratory (LANL) who characterize and document waste streams in the Waste Compliance and Tracking System (WCATS) according to Environmental Protection Agency (EPA) Department of Transportation (DOT) regulations, Department of Energy Orders, and other applicable criteria. When you have completed this course, you will be able to recognize how waste documentation enables LANL to characterize and classify hazardous waste for compliant treatment, storage, and disposal, identify the purpose of the waste stream profile (WSP), identify the agencies that provide guidance for waste management, and more.

  7. Doppler tracking (United States)

    Thomas, Christopher Jacob

    This study addresses the development of a methodology using the Doppler Effect for high-resolution, short-range tracking of small projectiles and vehicles. Minimal impact on the design of the moving object is achieved by incorporating only a transmitter in it and using ground stations for all other components. This is particularly useful for tracking objects such as sports balls that have configurations and materials that are not conducive to housing onboard instrumentation. The methodology developed here uses four or more receivers to monitor a constant frequency signal emitted by the object. Efficient and accurate schemes for filtering the raw signals, determining the instantaneous frequencies, time synching the frequencies from each receiver, smoothing the synced frequencies, determining the relative velocity and radius of the object and solving the nonlinear system of equations for object position in three dimensions as a function of time are developed and described here.

  8. Tracking Porters

    DEFF Research Database (Denmark)

    Bruun, Maja Hojer; Krause-Jensen, Jakob; Saltofte, Margit


    Anthropology attempts to gain insight into people's experiential life-worlds through long-term fieldwork. The quality of anthropological knowledge production, however, does not depend solely on the duration of the stay in the field, but also on a particular way of seeing social situations. The an...... the students followed the work of a group of porters. Drawing on anthropological concepts and research strategies the students gained crucial insights about the potential effects of using tracking technologies in the hospital....

  9. Residential Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde; Matsufuji, Y.


    Residential waste comes from residential areas with multi-family and single-family housing and includes four types of waste: household waste, garden waste, bulky waste and household hazardous waste. Typical unit generation rates, material composition, chemical composition and determining factors...... are discussed in this chapter. Characterizing residential waste is faced with the problem that many residences already divert some waste away from the official collection systems, for example performing home composting of vegetable waste and garden waste, having their bundled newspaper picked up by the scouts...... twice a year or bringing their used furniture to the flea markets organized by charity clubs. Thus, much of the data available on residential waste represents collected waste and not necessarily all generated waste. The latter can only be characterized by careful studies directly at the source...

  10. ISSVA classification. (United States)

    Dasgupta, Roshni; Fishman, Steven J


    Mulliken and Glowacki, in 1982 created a classification system of vascular anomalies which divided vascular anomalies into tumors and malformations which provided the framework for great advances in the management of these patients. This classification system was recently expanded at the 2014 ISSVA workshop in Melbourne. This revision again provides much greater detail including newly named anomalies and identified genes to account for recent advances in knowledge and clinical associations. Copyright © 2014. Published by Elsevier Inc.

  11. Hazardous Waste (United States)

    ... you throw these substances away, they become hazardous waste. Some hazardous wastes come from products in our homes. Our garbage can include such hazardous wastes as old batteries, bug spray cans and paint ...


    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The Objective for 2006 was to complete all of the CMS Tracker sub-detectors and to start the integration of the sub-detectors into the Tracker Support Tube (TST). The Objective for 2007 is to deliver to CMS a completed, installed, commissioned and calibrated Tracking System (Silicon Strip and Pixels) aligned to < 100µ in April 2008 ready for the first physics collisions at LHC. In November 2006 all of the sub-detectors had been delivered to the Tracker Integration facility (TIF) at CERN and the tests and QA procedures to be carried out on each sub-detector before integration had been established. In December 2006, TIB/TID+ was integrated into TOB+, TIB/TID- was being prepared for integration, and TEC+ was undergoing tests at the final tracker operating temperature (-100 C) in the Lyon cold room. In February 2007, TIB/TID- has been integrated into TOB-, and the installation of the pixel support tube and the services for TI...

  13. Tissue Classification

    DEFF Research Database (Denmark)

    Van Leemput, Koen; Puonti, Oula


    Computational methods for automatically segmenting magnetic resonance images of the brain have seen tremendous advances in recent years. So-called tissue classification techniques, aimed at extracting the three main brain tissue classes (white matter, gray matter, and cerebrospinal fluid), are now...... well established. In their simplest form, these methods classify voxels independently based on their intensity alone, although much more sophisticated models are typically used in practice. This article aims to give an overview of often-used computational techniques for brain tissue classification...

  14. Monitoring nanotechnology using patent classifications: an overview and comparison of nanotechnology classification schemes (United States)

    Jürgens, Björn; Herrero-Solana, Victor


    Patents are an essential information source used to monitor, track, and analyze nanotechnology. When it comes to search nanotechnology-related patents, a keyword search is often incomplete and struggles to cover such an interdisciplinary discipline. Patent classification schemes can reveal far better results since they are assigned by experts who classify the patent documents according to their technology. In this paper, we present the most important classifications to search nanotechnology patents and analyze how nanotechnology is covered in the main patent classification systems used in search systems nowadays: the International Patent Classification (IPC), the United States Patent Classification (USPC), and the Cooperative Patent Classification (CPC). We conclude that nanotechnology has a significantly better patent coverage in the CPC since considerable more nanotechnology documents were retrieved than by using other classifications, and thus, recommend its use for all professionals involved in nanotechnology patent searches.

  15. Xenolog classification. (United States)

    Darby, Charlotte A; Stolzer, Maureen; Ropp, Patrick J; Barker, Daniel; Durand, Dannie


    Orthology analysis is a fundamental tool in comparative genomics. Sophisticated methods have been developed to distinguish between orthologs and paralogs and to classify paralogs into subtypes depending on the duplication mechanism and timing, relative to speciation. However, no comparable framework exists for xenologs: gene pairs whose history, since their divergence, includes a horizontal transfer. Further, the diversity of gene pairs that meet this broad definition calls for classification of xenologs with similar properties into subtypes. We present a xenolog classification that uses phylogenetic reconciliation to assign each pair of genes to a class based on the event responsible for their divergence and the historical association between genes and species. Our classes distinguish between genes related through transfer alone and genes related through duplication and transfer. Further, they separate closely-related genes in distantly-related species from distantly-related genes in closely-related species. We present formal rules that assign gene pairs to specific xenolog classes, given a reconciled gene tree with an arbitrary number of duplications and transfers. These xenology classification rules have been implemented in software and tested on a collection of ∼13 000 prokaryotic gene families. In addition, we present a case study demonstrating the connection between xenolog classification and gene function prediction. The xenolog classification rules have been implemented in N otung 2.9, a freely available phylogenetic reconciliation software package. . Gene trees are available at . Supplementary data are available at Bioinformatics online.

  16. Transporter Classification Database (TCDB) (United States)

    U.S. Department of Health & Human Services — The Transporter Classification Database details a comprehensive classification system for membrane transport proteins known as the Transporter Classification (TC)...

  17. Preliminary assessment of blending Hanford tank wastes

    Energy Technology Data Exchange (ETDEWEB)

    Geeting, J.G.H.; Kurath, D.E.


    A parametric study of blending Hanford tank wastes identified possible benefits from blending wastes prior to immobilization as a high level or low level waste form. Track Radioactive Components data were used as the basis for the single-shell tank (SST) waste composition, while analytical data were used for the double-shell tank (DST) composition. Limiting components were determined using the existing feed criteria for the Hanford Waste Vitrification Plant (HWVP) and the Grout Treatment Facility (GTF). Results have shown that blending can significantly increase waste loading and that the baseline quantities of immobilized waste projected for the sludge-wash pretreatment case may have been drastically underestimated, because critical components were not considered. Alternatively, the results suggest further review of the grout feed specifications and the solubility of minor components in HWVP borosilicate glass. Future immobilized waste estimates might be decreased substantially upon a thorough review of the appropriate feed specifications.


    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The successful commissioning of ~ 25% of the Silicon Strip Tracker was completed in the Tracker Integration Facility (TIF) at CERN in July 2007 and the Tracker has since been prepared for moving and installation into CMS at P5. The Tracker was ready to move on schedule in September 2007. The Installation of the Tracker cooling pipes and LV cables between Patch Panel 1 (PP1) on the inside the CMS magnet cryostat, and the cooling plants and power system racks on the balconies has been completed. The optical fibres from PP1 to the readout FEDs in the USC have been installed, together with the Tracker cable channels, in parallel with the installation of the EB/HB services. All of the Tracker Safety, Power, DCS and the VME Readout Systems have been installed at P5 and are being tested and commissioned with CMS. It is planned to install the Tracker into CMS before Christmas. The Tracker will then be connected to the pre-installed services on Y...


    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The successful commissioning of ~ 25% of the Silicon Strip Tracker was completed in the Tracker Integration Facility (TIF) at CERN on 18 July 2007 and the Tracker has since been prepared for moving and installation into CMS at P5. The Tracker will be ready to move on schedule in September 2007. The Installation of the Tracker cooling pipes and LV cables between Patch Panel 1 (PP1) on the inside the CMS magnet cryostat, and the cooling plants and power system racks on the balconies has been completed. The optical fibres from PP1 to the readout FEDs in the USC will be installed in parallel with the installation of the EB/HB services, and will be completed in October. It is planned to install the Tracker into CMS at the end of October, after the completion of the installation of the EB/HB services. The Tracker will then be connected to the pre-installed services on YB0 and commissioned with CMS in December. The FPix and BPix continue to make ...

  20. Twelfth annual US DOE low-level waste management conference

    Energy Technology Data Exchange (ETDEWEB)


    The papers in this document comprise the proceedings of the Department of Energy's Twelfth Annual Low-Level Radioactive Waste Management Conference, which was held in Chicago, Illinois, on August 28 and 29, 1990. General subjects addressed during the conference included: mixed waste, low-level radioactive waste tracking and transportation, public involvement, performance assessment, waste stabilization, financial assurance, waste minimization, licensing and environmental documentation, below-regulatory-concern waste, low-level radioactive waste temporary storage, current challenges, and challenges beyond 1990.

  1. Monitoring electromagnetic tracking error using redundant sensors (United States)

    Harish, Vinyas; Bibic, Eden; Lasso, Andras; Holden, Matthew S.; Vaughan, Thomas; Baum, Zachary; Ungi, Tamas; Fichtinger, Gabor


    PURPOSE: The intraoperative measurement of tracking error is crucial to ensure the reliability of electromagnetically navigated procedures. For intraoperative use, methods need to be quick to set up, easy to interpret, and not interfere with the ongoing procedure. Our goal was to evaluate the feasibility of using redundant electromagnetic sensors to alert users to tracking error in a navigated intervention setup. METHODS: Electromagnetic sensors were fixed to a rigid frame around a region of interest and on surgical tools. A software module was designed to detect tracking error by comparing real-time measurements of the differences between inter-sensor distances and angles to baseline measurements. Once these measurements were collected, a linear support vector machine-based classifier was used to predict tracking errors from redundant sensor readings. RESULTS: Measuring the deviation in the reported inter-sensor distance and angle between the needle and cautery served as a valid indicator for electromagnetic tracking error. The highest classification accuracy, 86%, was achieved based on readings from the cautery when the two sensors on the cautery were close together. The specificity of this classifier was 93% and the sensitivity was 82%. CONCLUSION: Placing redundant electromagnetic sensors in a workspace seems to be feasible for the intraoperative detection of electromagnetic tracking error in controlled environments. Further testing should be performed to optimize the measurement error threshold used for classification in the support vector machine, and improve the sensitivity of our method before application in real procedures.

  2. Waste management

    DEFF Research Database (Denmark)

    Bruun Hansen, Karsten; Jamison, Andrew


    The case study deals with public accountability issues connected to household waste management in the municipality of Copenhagen, Denmark.......The case study deals with public accountability issues connected to household waste management in the municipality of Copenhagen, Denmark....

  3. Radar Target Classification using Recursive Knowledge-Based Methods

    DEFF Research Database (Denmark)

    Jochumsen, Lars Wurtz

    The topic of this thesis is target classification of radar tracks from a 2D mechanically scanning coastal surveillance radar. The measurements provided by the radar are position data and therefore the classification is mainly based on kinematic data, which is deduced from the position. The target...

  4. Food waste


    Arazim, Lukáš


    This thesis looks into issues related to food waste and consists of a theoretical and a practical part. Theoretical part aims to provide clear and complex definition of wood waste related problems, summarize current findings in Czech and foreign sources. Introduction chapter explains important terms and legal measures related to this topic. It is followed by description of causes, implications and possibilities in food waste reduction. Main goal of practical part is analyzing food waste in Cz...

  5. Automotive Wastes. (United States)

    Guigard, Selma E; Shariaty, Pooya; Niknaddaf, Saeid; Lashaki, Masoud Jahandar; Atkinson, John D; Hashisho, Zaher


    A review of the literature from 2014 related to automotive wastes is presented. Topics include solid wastes from autobodies and tires as well as vehicle emissions to soil and air as a result of the use of conventional and alternative fuels. Potential toxicological and health risks related to automotive wastes are also discussed.

  6. Radioactive Waste. (United States)

    Blaylock, B. G.


    Presents a literature review of radioactive waste disposal, covering publications of 1976-77. Some of the studies included are: (1) high-level and long-lived wastes, and (2) release and burial of low-level wastes. A list of 42 references is also presented. (HM)

  7. 76 FR 62062 - Proposed Approval of the Central Characterization Project's Remote-Handled Transuranic Waste... (United States)


    ... a person's skin. Remote-handled (RH) TRU waste emits more radiation than CH TRU waste and must... capabilities to characterize TRU waste(s) and its ability to comply with the regulatory limits and tracking... (VE)..... VE by reviewing Notification to EPA existing audio/ upon completion of visual recordings...

  8. Solar tracking system (United States)

    Okandan, Murat; Nielson, Gregory N.


    Solar tracking systems, as well as methods of using such solar tracking systems, are disclosed. More particularly, embodiments of the solar tracking systems include lateral supports horizontally positioned between uprights to support photovoltaic modules. The lateral supports may be raised and lowered along the uprights or translated to cause the photovoltaic modules to track the moving sun.

  9. Waste Collection Vehicle Routing Problem: Literature Review

    Directory of Open Access Journals (Sweden)

    Hui Han


    Full Text Available Waste generation is an issue which has caused wide public concern in modern societies, not only for the quantitative rise of the amount of waste generated, but also for the increasing complexity of some products and components. Waste collection is a highly relevant activity in the reverse logistics system and how to collect waste in an efficient way is an area that needs to be improved. This paper analyzes the major contribution about Waste Collection Vehicle Routing Problem (WCVRP in literature. Based on a classification of waste collection (residential, commercial and industrial, firstly the key findings for these three types of waste collection are presented. Therefore, according to the model (Node Routing Problems and Arc Routing problems used to represent WCVRP, different methods and techniques are analyzed in this paper to solve WCVRP. This paper attempts to serve as a roadmap of research literature produced in the field of WCVRP.

  10. Agricultural Waste. (United States)

    Xue, Ling; Zhang, Panpan; Shu, Huajie; Chang, Chein-Chi; Wang, Renqing; Zhang, Shuping


    In recent years, the quantity of agricultural waste has been rising rapidly all over the world. As a result, the environmental problems and negative impacts of agricultural waste are drawn more and more attention. Therefore, there is a need to adopt proper approaches to reduce and reuse agricultural waste. This review presented about 200 literatures published in 2015 relating to the topic of agricultural waste. The review examined research on agricultural waste in 2015 from the following four aspects: the characterization, reuse, treatment, and management. Researchers highlighted the importance to reuse agricultural waste and investigated the potential to utilize it as biofertilizers, cultivation material, soil amendments, adsorbent, material, energy recycling, enzyme and catalyst etc. The treatment of agricultural waste included carbonization, biodegradation, composting hydrolysis and pyrolysis. Moreover, this review analyzed the differences of the research progress in 2015 from 2014. It may help to reveal the new findings and new trends in this field in 2015 comparing to 2014.

  11. Technological evolution of industrial wastes management

    Energy Technology Data Exchange (ETDEWEB)

    de Fraja Frangipane, E.; Cossu, R.; Andreottola, G.; Canziani, R. (Politecnico di Milano, Milan (Italy). Ist. di Ingegneria Sanitaria; Cagliari Univ. (Italy). Facolta' di Ingegneria)

    In this paper the solutions adopted in the most industrialized countries for industrial wastes recovery, treatment and disposal have been considered and compared. The attention has been focused in particular on hazardous wastes, considering the different classification criteria adopted in various countries. As far as waste treatment and disposal are concerned, the already established technologies (basically incineration, chemical-physical treatment and sanitary landfilling) and the less common codisposal techniques have been considered. Moreover, the present technological evolution in this field and the environmental impact assessment methodologies, required for the allocation of industrial waste treatment plants, have been analysed.

  12. Using Microbial Source Tracking to Enhance Environmental Stewardship of Agriculture (United States)

    Martin, Sherry; Rose, Joan; Flood, Matthew; Aw, Tiong; Hyndman, David


    Large scale agriculture relies on the application of chemical fertilizers and animal manure. It is well known that nutrients in excess of a plant's uptake and soil retention capacity can travel to nearby waterways via surface run-off and groundwater pathways, indirectly fertilizing these aquatic ecosystems. It has not yet been possible to distinguish water quality impacts of fertilizer from those derived from human and animal waste sources. However, new microbial source tracking (MST) tools allow specific identification of fecal pollution. Our objective was to examine pollution risks at the regional scale using MST, mapping and classification and regression tree analysis. We present results Bovine M2 genetic marker data from three flow regimes (baseflow, snow melt, and post-planting rain). Key landscape characteristics were related to the presence of the bovine markers and appear to be related to fate and transport. Impacts at this regional watershed scale will be discussed. Our research aims to identify the impacts of agricultural management practices on water quality by linking nutrient concentrations with fecal pollution sources. We hope that our research will provide guidance that will help improve water quality through agricultural best management practices to reduce pathogen contamination.

  13. Classification in Australia. (United States)

    McKinlay, John

    Despite some inroads by the Library of Congress Classification and short-lived experimentation with Universal Decimal Classification and Bliss Classification, Dewey Decimal Classification, with its ability in recent editions to be hospitable to local needs, remains the most widely used classification system in Australia. Although supplemented at…

  14. Remote Sensing Information Classification (United States)

    Rickman, Douglas L.


    This viewgraph presentation reviews the classification of Remote Sensing data in relation to epidemiology. Classification is a way to reduce the dimensionality and precision to something a human can understand. Classification changes SCALAR data into NOMINAL data.

  15. Classification in context

    DEFF Research Database (Denmark)

    Mai, Jens Erik


    This paper surveys classification research literature, discusses various classification theories, and shows that the focus has traditionally been on establishing a scientific foundation for classification research. This paper argues that a shift has taken place, and suggests that contemporary...

  16. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund


    Industrial waste is waste from industrial production and manufacturing. Industry covers many industrial sectors and within each sector large variations are found in terms of which raw materials are used, which production technology is used and which products are produced. Available data on unit...... generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...

  17. Calculating track thrust with track functions (United States)

    Chang, Hsi-Ming; Procura, Massimiliano; Thaler, Jesse; Waalewijn, Wouter J.


    In e+e- event shapes studies at LEP, two different measurements were sometimes performed: a “calorimetric” measurement using both charged and neutral particles and a “track-based” measurement using just charged particles. Whereas calorimetric measurements are infrared and collinear safe, and therefore calculable in perturbative QCD, track-based measurements necessarily depend on nonperturbative hadronization effects. On the other hand, track-based measurements typically have smaller experimental uncertainties. In this paper, we present the first calculation of the event shape “track thrust” and compare to measurements performed at ALEPH and DELPHI. This calculation is made possible through the recently developed formalism of track functions, which are nonperturbative objects describing how energetic partons fragment into charged hadrons. By incorporating track functions into soft-collinear effective theory, we calculate the distribution for track thrust with next-to-leading logarithmic resummation. Due to a partial cancellation between nonperturbative parameters, the distributions for calorimeter thrust and track thrust are remarkably similar, a feature also seen in LEP data.

  18. Waste indicators

    Energy Technology Data Exchange (ETDEWEB)

    Dall, O.; Lassen, C.; Hansen, E. [Cowi A/S, Lyngby (Denmark)


    The Waste Indicator Project focuses on methods to evaluate the efficiency of waste management. The project proposes the use of three indicators for resource consumption, primary energy and landfill requirements, based on the life-cycle principles applied in the EDIP Project. Trial runs are made With the indicators on paper, glass packaging and aluminium, and two models are identified for mapping the Danish waste management, of which the least extensive focuses on real and potential savings. (au)

  19. Surrogate formulations for thermal treatment of low-level mixed waste, Part II: Selected mixed waste treatment project waste streams

    Energy Technology Data Exchange (ETDEWEB)

    Bostick, W.D.; Hoffmann, D.P.; Chiang, J.M.; Hermes, W.H.; Gibson, L.V. Jr.; Richmond, A.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Mayberry, J. [Science Applications International Corp., Idaho Falls, ID (United States); Frazier, G. [Univ. of Tennessee, Knoxville, TN (United States)


    This report summarizes the formulation of surrogate waste packages, representing the major bulk constituent compositions for 12 waste stream classifications selected by the US DOE Mixed Waste Treatment Program. These waste groupings include: neutral aqueous wastes; aqueous halogenated organic liquids; ash; high organic content sludges; adsorbed aqueous and organic liquids; cement sludges, ashes, and solids; chloride; sulfate, and nitrate salts; organic matrix solids; heterogeneous debris; bulk combustibles; lab packs; and lead shapes. Insofar as possible, formulation of surrogate waste packages are referenced to authentic wastes in inventory within the DOE; however, the surrogate waste packages are intended to represent generic treatability group compositions. The intent is to specify a nonradiological synthetic mixture, with a minimal number of readily available components, that can be used to represent the significant challenges anticipated for treatment of the specified waste class. Performance testing and evaluation with use of a consistent series of surrogate wastes will provide a means for the initial assessment (and intercomparability) of candidate treatment technology applicability and performance. Originally the surrogate wastes were intended for use with emerging thermal treatment systems, but use may be extended to select nonthermal systems as well.

  20. Renewable Energy Tracking Systems (United States)

    Renewable energy generation ownership can be accounted through tracking systems. Tracking systems are highly automated, contain specific information about each MWh, and are accessible over the internet to market participants.

  1. DOE mixed waste treatment capacity analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ross, W.A.; Wehrman, R.R.; Young, J.R.; Shaver, S.R.


    This initial DOE-wide analysis compares the reported national capacity for treatment of mixed wastes with the calculated need for treatment capacity based on both a full treatment of mixed low-level and transuranic wastes to the Land Disposal Restrictions and on treatment of transuranic wastes to the WIPP waste acceptance criteria. The status of treatment capacity is reported based on a fifty-element matrix of radiation-handling requirements and functional treatment technology categories. The report defines the classifications for the assessment, describes the models used for the calculations, provides results from the analysis, and includes appendices of the waste treatment facilities data and the waste stream data used in the analysis.

  2. Human tracking with thermal omnidirectional vision (United States)

    Tang, Y.; Li, Y. F.; Chen, H.


    In this paper, we explore a new tracking system for human tracking in thermal catadioptric omnidirectional vision. Due to very limited features can be adopted in thermal image except for contour information, we proposed to use Histogram of Oriented Gradient (HOG) feature to represent the contour information and employ Support Vector Machine (SVM) to classify the foreground and background. In this paper, there are three novel points. First, the classification posterior probability of SVM will be adopted to relate the observation likelihood of particle filter to guide the particles for tracking purpose instead of neglect in previous tracking method. Second, due to no existing thermal catadioptric omnidirectional vision database available in public, a thermal catadioptric omnidirectional video database and extracted human samples have been established for academic studies. Third, tracking window distribution of particle filter has been adjusted to fit the characteristic of catadioptric omnidirectional vision on account of the size of target in image is varying when the distance between target and omni-sensor changed in world coordinate. In addition, the catadioptric omnidirectional imaging is different with traditional imaging for inherent distortion, so the polar coordinate will be used. The experimental results show that the proposed tracking approach has a stable performance.

  3. Intelligent Human Tracking Based on Multimodal Integration (United States)

    Nakamura, Keisuke; Nakadai, Kazuhiro; Asano, Futoshi; Nakajima, Hirofumi; Ince, Gökhan

    Localization and tracking of humans are essential research topics in robotics. In particular, Sound Source Localization (SSL) has been of great interest. Despite the numerous reported methods, SSL in a real environment had mainly three issues; robustness against noise with high power, no framework for selective listening to sound sources, and tracking of inactive and/or noisy sound sources. For the first issue, we extended Multiple SIgnal Classification by incorporating Generalized Eigen Value Decomposition (GEVD-MUSIC) so that it can deal with high power noise and can select target sound sources. For the second issue, we proposed Sound Source Identification (SSI) based on hierarchical Gaussian mixture models and integrated it with GEVD-MUSIC to realize a function to listen to a specific sound source according to the sort of the sound source. For the third issue, auditory and visual human tracking were integrated using particle filtering. These three techniques are integrated into an intelligent human tracking system. Experimental results showed that integration of SSL and SSI successfully achieved human tracking only by audition, and the audio-visual integration showed considerable improvement in tracking by compensating the loss of auditory or visual information.

  4. Low-resolution Airborne Radar Aircraft Target Classification

    Directory of Open Access Journals (Sweden)

    Wang Fu-you


    Full Text Available Target classification is particularly important in modern and future airborne radar. Nowadays, most investigations of radar target classification are based on wideband radar signals, which have higher requirements for SNR and radar systems, and are sensitive to the angles. Modern airborne radars require narrowband tracking and target classification; hence, an algorithm based on the narrowband fractal features and the amplitude modulation of a two-dimensional distribution is presented. Experimental data and Support Vector Machine (SVM are used to verify the algorithm, and the classification results validate the proposed method, which show that jet aircrafts, propeller aircrafts, and helicopters can be classified with an average discrimination rate greater than 92%.

  5. Performance of ATLAS tracking

    CERN Document Server

    Roe, Shaun; The ATLAS collaboration


    Run-2 of the Large Hadron Collider (LHC) has provided new challenges to track and vertex reconstruction with higher centre-of-mass energies and luminosity leading to increasingly high-multiplicity envi-ronments. This talk provides an overview of the tracking performance, highlighting tracking improvements due to the Insertable B-Layer (IBL) and the introduction of time-dependent alignment.

  6. Classification of the web

    DEFF Research Database (Denmark)

    Mai, Jens Erik


    This paper discusses the challenges faced by investigations into the classification of the Web and outlines inquiries that are needed to use principles for bibliographic classification to construct classifications of the Web. This paper suggests that the classification of the Web meets challenges...

  7. The waste originating from nuclear energy peaceful applications and its management; Os rejeitos provenientes de aplicacoes pacificas da energia nuclear e o seu gerenciamento

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Jair Albo Marques de [E-mail: jairalbo at (Brazil)] [and others


    This work presents the waste originating from nuclear energy and its management. It approaches the following main topics: nature and classification of the wastes; security requirements to the waste management; state of the art related to the wastes derivates of the uses of the nuclear energy; wastes in the fuel cycle; wastes of the industrial, medical and research and development applications; costs of the waste management.

  8. A solid waste audit and directions for waste reduction at the University of British Columbia, Canada. (United States)

    Felder, M A; Petrell, R J; Duff, S J


    A novel design for a solid waste audit was developed and applied to the University of British Columbia, Canada, in 1998. This audit was designed to determine the characteristics of the residual solid waste generated by the campus and provide directions for waste reduction. The methodology was constructed to address complications in solid waste sampling, including spatial and temporal variation in waste, extrapolation from the study area, and study validation. Accounting for spatial effects decreased the variation in calculating total waste loads. Additionally, collecting information on user flow provided a means to decrease daily variation in solid waste and allow extrapolation over time and space. The total annual waste estimated from the experimental design was compared to documented values and was found to differ by -18%. The majority of this discrepancy was likely attributable to the unauthorised disposal of construction and demolition waste. Several options were proposed to address waste minimisation goals. These included: enhancing the current recycling program, source reduction of plastic materials, and/or diverting organic material to composting (maximum diversion: approximately 320, approximately 270, and approximately 1510 t yr(-1), respectively). The greatest diversion by weight would be accomplished through the diversion of organic material, as it was estimated to comprise 70% of the projected waste stream. The audit methodology designed is most appropriate for facilities/regions that have a separate collection system for seasonal wastes and have a means for tracking user flow.

  9. Tracking by Neural Nets

    CERN Document Server

    Jofrehei, Arash


    Current track reconstruction methods start with two points and then for each layer loop through all possible hits to find proper hits to add to that track. Another idea would be to use this large number of already reconstructed events and/or simulated data and train a machine on this data to find tracks given hit pixels. Training time could be long but real time tracking is really fast. Simulation might not be as realistic as real data but tracking efficiency is 100 percent for that while by using real data we would probably be limited to current efficiency. The fact that this approach can be a lot faster and even more efficient than current methods by using simulation data can make it a great alternative for current track reconstruction methods used in both triggering and tracking.

  10. Tracks: Nurses and the Tracking Network

    Centers for Disease Control (CDC) Podcasts


    This podcast highlights the utility of the National Environmental Public Health Tracking Network for nurses in a variety of work settings. It features commentary from the American Nurses Association and includes stories from a public health nurse in Massachusetts.  Created: 6/6/2012 by National Center for Environmental Health (NCEH)/Division of Environmental Hazards and Health Effects (DEHHE)/Environmental Health Tracking Branch (EHTB).   Date Released: 6/6/2012.

  11. Object tracking with stereo vision (United States)

    Huber, Eric


    A real-time active stereo vision system incorporating gaze control and task directed vision is described. Emphasis is placed on object tracking and object size and shape determination. Techniques include motion-centroid tracking, depth tracking, and contour tracking.

  12. Calibration of a Plastic Classification System with the CCW Model; Calibracion de un Sistema de Clasification de Plasticos segun el Modelo CCW

    Energy Technology Data Exchange (ETDEWEB)

    Barcala Riveira, J. M.; Fernandez Marron, J. L.; Alberdi Primicia, J.; Navarrete Marin, J. J.; Oller Gonzalez, J. C.


    This document describes the calibration of a plastic Classification system with the CCW model (Classification by Quaternions built Wavelet Coefficients). The method is applied to spectra of plastics usually present in domestic wastes. Obtained results are showed. (Author) 16 refs.

  13. SAW Classification Algorithm for Chinese Text Classification

    Directory of Open Access Journals (Sweden)

    Xiaoli Guo


    Full Text Available Considering the explosive growth of data, the increased amount of text data’s effect on the performance of text categorization forward the need for higher requirements, such that the existing classification method cannot be satisfied. Based on the study of existing text classification technology and semantics, this paper puts forward a kind of Chinese text classification oriented SAW (Structural Auxiliary Word algorithm. The algorithm uses the special space effect of Chinese text where words have an implied correlation between text information mining and text categorization for high-correlation matching. Experiments show that SAW classification algorithm on the premise of ensuring precision in classification, significantly improve the classification precision and recall, obviously improving the performance of information retrieval, and providing an effective means of data use in the era of big data information extraction.

  14. Prediction and classification of respiratory motion

    CERN Document Server

    Lee, Suk Jin


    This book describes recent radiotherapy technologies including tools for measuring target position during radiotherapy and tracking-based delivery systems. This book presents a customized prediction of respiratory motion with clustering from multiple patient interactions. The proposed method contributes to the improvement of patient treatments by considering breathing pattern for the accurate dose calculation in radiotherapy systems. Real-time tumor-tracking, where the prediction of irregularities becomes relevant, has yet to be clinically established. The statistical quantitative modeling for irregular breathing classification, in which commercial respiration traces are retrospectively categorized into several classes based on breathing pattern are discussed as well. The proposed statistical classification may provide clinical advantages to adjust the dose rate before and during the external beam radiotherapy for minimizing the safety margin. In the first chapter following the Introduction  to this book, we...

  15. Tracking dynamic team activity

    Energy Technology Data Exchange (ETDEWEB)

    Tambe, M. [Univ. of Southern California, Marina del Rey, CA (United States)


    AI researchers are striving to build complex multi-agent worlds with intended applications ranging from the RoboCup robotic soccer tournaments, to interactive virtual theatre, to large-scale real-world battlefield simulations. Agent tracking - monitoring other agent`s actions and inferring their higher-level goals and intentions - is a central requirement in such worlds. While previous work has mostly focused on tracking individual agents, this paper goes beyond by focusing on agent teams. Team tracking poses the challenge of tracking a team`s joint goals and plans. Dynamic, real-time environments add to the challenge, as ambiguities have to be resolved in real-time. The central hypothesis underlying the present work is that an explicit team-oriented perspective enables effective team tracking. This hypothesis is instantiated using the model tracing technology employed in tracking individual agents. Thus, to track team activities, team models are put to service. Team models are a concrete application of the joint intentions framework and enable an agent to track team activities, regardless of the agent`s being a collaborative participant or a non-participant in the team. To facilitate real-time ambiguity resolution with team models: (i) aspects of tracking are cast as constraint satisfaction problems to exploit constraint propagation techniques; and (ii) a cost minimality criterion is applied to constrain tracking search. Empirical results from two separate tasks in real-world, dynamic environments one collaborative and one competitive - are provided.

  16. Waste Facilities (United States)

    Vermont Center for Geographic Information — This dataset was developed from the Vermont DEC's list of certified solid waste facilities. It includes facility name, contact information, and the materials...

  17. Asset tracking in harsh environments

    Energy Technology Data Exchange (ETDEWEB)

    O' Neal, E.S. [Infosight Corp., Chillicothe, OH (United States)


    Current economic times require tight control of all assets / inventory and processes a company manages. These items if managed correctly and timely can mean the difference between success and failure of a company. Cost savings in hard economic times are essential to allow a company to utilize its assets to the fullest potential by eliminating duplication and waste. Accurate process management leads to greater customer satisfaction and loyalty. Many industries and processes have believed it to be impossible to track their products or assets using bar-codes due to the unique conditions of their environment; whether it is high temperature, rough handling or chemicals. That has now changed. Companies specializing in identification methods have stepped up to the challenge and have overcome many obstacles of the past. It's no longer a paper or plastic bar-code world. The presentation will be broken down into four parts: 1) The differences between Asset and ID tracking; 2) Why does a company need to bar-code?; 3) The objections many companies use for not bar-coding; and, 4) What's new in bar-coding? Case study handouts and a reference list of various companies including software, labeling and attachment techniques will be available at the end of the presentation. (author)

  18. Households Willingness to Pay for Improved Urban Solid Waste ...

    African Journals Online (AJOL)


    sanitary fees and the willingness to pay (WTP) of residents for improved urban waste management, and suggest ... Keywords: Urban waste management, willingness to pay, cost recovery, Ethiopia, cities. JEL Classification: D13 ...... average age of respondents was 39.5 years and average family size 4.76. In addition, 53.54 ...

  19. Visual tracking by separability-maximum boosting (United States)

    Hou, Jie; Mao, Yao-bin; Sun, Jin-sheng


    Recently, visual tracking has been formulated as a classification problem whose task is to detect the object from the scene with a binary classifier. Boosting based online feature selection methods, which adopt the classifier to appearance changes by choosing the most discriminative features, have been demonstrated to be effective for visual tracking. A major problem of such online feature selection methods is that an inaccurate classifier may give imprecise tracking windows. Tracking error accumulates when the tracker trains the classifier with misaligned samples and finally leads to drifting. Separability-maximum boosting (SMBoost), an alternative form of AdaBoost which characterizes the separability between the object and the scene by their means and covariance matrices, is proposed. SMBoost only needs the means and covariance matrices during training and can be easily adopted to online learning problems by estimating the statistics incrementally. Experiment on UCI machine learning datasets shows that SMBoost is as accurate as offline AdaBoost, and significantly outperforms Oza's online boosting. Accurate classifier stabilizes the tracker on challenging video sequences. Empirical results also demonstrate improvements in term of tracking precision and speed, comparing ours to those state-of-the-art ones.

  20. Gaseous emissions from waste combustion. (United States)

    Werther, Joachim


    An overview is given on methods and technologies for limiting the gaseous emissions from waste combustion. With the guideline 2000/76/EC recent European legislation has set stringent limits not only for the mono-combustion of waste in specialized incineration plants but also for co-combustion in coal-fired power plants. With increased awareness of environmental issues and stepwise decrease of emission limits and inclusion of more and more substances into the network of regulations a multitude of emission abatement methods and technologies have been developed over the last decades. The result is the state-of-the-art waste incinerator with a number of specialized process steps for the individual components in the flue gas. The present work highlights some new developments which can be summarized under the common goal of reducing the costs of flue gas treatment by applying systems which combine the treatment of several noxious substances in one reactor or by taking new, simpler routes instead of the previously used complicated ones or - in the case of flue gas desulphurisation - by reducing the amount of limestone consumption. Cost reduction is also the driving force for new processes of conditioning of nonhomogenous waste before combustion. Pyrolysis or gasification is used for chemical conditioning whereas physical conditioning means comminution, classification and sorting processes. Conditioning yields a fuel which can be used in power plants either as a co-fuel or a mono-fuel and which will burn there under much better controlled conditions and therefore with less emissions than the nonhomogeneous waste in a conventional waste incinerator. Also for cost reasons, co-combustion of wastes in coal-fired power stations is strongly pressing into the market. Recent investigations reveal that the co-firing of waste can also have beneficial effects on the operating behavior of the boiler and on the gaseous emissions.

  1. DCS Budget Tracking System (United States)

    Social Security Administration — DCS Budget Tracking System database contains budget information for the Information Technology budget and the 'Other Objects' budget. This data allows for monitoring...

  2. Classification of dual language audio-visual content: Introduction to the VideoCLEF 2008 pilot benchmark evaluation task

    NARCIS (Netherlands)

    Larson, M.; Newman, E.; Jones, G.J.F.; Köhler, J.; Larson, M.; de Jong, F.M.G.; Kraaij, W.; Ordelman, R.J.F.


    VideoCLEF is a new track for the CLEF 2008 campaign. This track aims to develop and evaluate tasks in analyzing multilingual video content. A pilot of a Vid2RSS task involving assigning thematic class labels to video kicks off the VideoCLEF track in 2008. Task participants deliver classification

  3. Tribal Waste Management Program (United States)

    The EPA’s Tribal Waste Management Program encourages environmentally sound waste management practices that promote resource conservation through recycling, recovery, reduction, clean up, and elimination of waste.

  4. Continental land cover classification using satellite data (United States)

    Townshend, J. R. G.; Tucker, C. J.


    Four different approaches to the classification of land cover for whole continents using multitemporal images of the normalized difference vegetation index derived from the Advanced Very High Resolution Radiometer of the NOAA series of satellites are discussed. The first approach uses only two dates from different seasons and classification dependent upon subdivision of the resultant two-dimensional feature space by an analyst using a track ball. The second approach involves a similar method of partitioning the feature space, but with the two dimensions being the first and second principal components derived from 13 four-week composite images. The third approach uses the maximum likelihood rule to derive the classified map. In the fourth approach, the amount of deviation from characteristic curves is used as a basis for classification.

  5. Classification of spent nuclear fuel (SNF)

    Energy Technology Data Exchange (ETDEWEB)


    This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high-priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. This document discusses the classification of spent nuclear fuels.

  6. Classification of cultivated plants.

    NARCIS (Netherlands)

    Brandenburg, W.A.


    Agricultural practice demands principles for classification, starting from the basal entity in cultivated plants: the cultivar. In establishing biosystematic relationships between wild, weedy and cultivated plants, the species concept needs re-examination. Combining of botanic classification, based



    Dias, Gisele Loise; Franco, Gianfábio Pimentel; Sarturi, Fernanda; Martins, Cleverson Antonio Ferreira

    2014-01-01 The aim of this study was to analyze the behavior with respect to the correct classification of medical waste of nurses working at hospitals in two cities located in the north and northwest of the state of Rio Grande do Sul (Brazil). This is an exploratory-descriptive and cross-sectional study on medical waste management (MWM). It was found that the nurses have difficulty in identifying and sorting the waste according to the classification proposed in t...

  8. CWI at TREC 2012, KBA track and Session Track

    NARCIS (Netherlands)

    S. Araújo (Samur); C. Boscarino (Corrado); G.G. Gebremeskel (Gebre); J. He (Jiyin); A.P. de Vries (Arjen); E.M. Voorhees; L. P. Buckland (Buckland, Lori P.)


    htmlabstractWe participated in two tracks: Knowledge Base Acceleration (KBA) Track and Session Track. In the KBA track, we focused on experi- menting with different approaches as it is the first time the track is launched. We experimented with supervised and unsupervised re- trieval models. Our

  9. Breaking the Code on Challenging Waste - 13267

    Energy Technology Data Exchange (ETDEWEB)

    Witzeman, John; Estes, Charles [URS - CH2M Oak Ridge LLC (United States); White, Aaron [U.S. Department of Energy (United States)


    Mixed low-level wastes (MLLW) with no available path to treatment or disposal have been longstanding challenges for DOE facilities. Today, mixed wastes with no path to treatment or disposal frequently present themselves in the form of combinations of problematic matrixes, problematic EPA Hazardous Waste Codes, and security classification requirements. In order to successfully treat and disposition these challenging wastes, waste management personnel must be more inquisitive and challenge the status quo more than ever before. All aspects of the waste from how it was generated to how the waste is currently being managed must be revisited. Each fact, the basis of each decision, and each regulatory determination must be investigated and validated. Since many of the difficult waste streams were generated several years ago, it can be quite challenging to locate knowledgeable generators from the time of generation. Significant investigation is often required to obtain the needed information to evaluate legacy waste streams. Special attention must be paid to the little things that may not seem central to the issues being investigated. Solutions are sometimes found in these details. (authors)

  10. Tracking of Gross Motor Coordination From Childhood Into Adolescence

    DEFF Research Database (Denmark)

    Lima, Rodrigo Antunes; Bugge, Anna; Pfeiffer, Karin Allor


    had a 5.44 and 5.15 times greater chance to be in the lower MC classification group during the 7-year follow-up, respectively, in comparison with children in their lowest tertiles. CONCLUSION: MC tracked moderately through childhood to early adolescence. Because heavier children had a greater chance...

  11. 21 CFR 872.2060 - Jaw tracking device. (United States)


    ... for monitoring mandibular jaw positions relative to the maxilla—(1) Identification. A jaw tracking device for monitoring mandibular jaw positions relative to the maxilla is a nonpowered or electrically..., while at rest and during jaw movement. (2) Classification. Class I (general controls). The device is...

  12. Eye-Tracking

    Directory of Open Access Journals (Sweden)

    Gabriela GROSSECK


    Full Text Available Eye-tracking: one of the newest and most efficient methods of improving on-line marketing communication is called eye-tracking. Marketers have borrowed this technique, usually used in psychological and medical research, in order to study web users with the help of a video camera incorporated in the monitor.

  13. Incentives from Curriculum Tracking (United States)

    Koerselman, Kristian


    Curriculum tracking creates incentives in the years before its start, and we should therefore expect test scores to be higher during those years. I find robust evidence for incentive effects of tracking in the UK based on the UK comprehensive school reform. Results from the Swedish comprehensive school reform are inconclusive. Internationally, I…

  14. Bewegingsvolgsysteem = Monitor tracking system

    NARCIS (Netherlands)

    Slycke, P.; Veltink, Petrus H.; Roetenberg, D.


    A motion tracking system for tracking an object composed of object parts in a three-dimensional space. The system comprises a number of magnetic field transmitters; a number of field receivers for receiving the magnetic fields of the field transmitters; a number of inertial measurement units for

  15. Large scale tracking algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Ross L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Love, Joshua Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Melgaard, David Kennett [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Karelitz, David B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pitts, Todd Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zollweg, Joshua David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Anderson, Dylan Z. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nandy, Prabal [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Whitlow, Gary L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bender, Daniel A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Byrne, Raymond Harry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)


    Low signal-to-noise data processing algorithms for improved detection, tracking, discrimination and situational threat assessment are a key research challenge. As sensor technologies progress, the number of pixels will increase signi cantly. This will result in increased resolution, which could improve object discrimination, but unfortunately, will also result in a significant increase in the number of potential targets to track. Many tracking techniques, like multi-hypothesis trackers, suffer from a combinatorial explosion as the number of potential targets increase. As the resolution increases, the phenomenology applied towards detection algorithms also changes. For low resolution sensors, "blob" tracking is the norm. For higher resolution data, additional information may be employed in the detection and classfication steps. The most challenging scenarios are those where the targets cannot be fully resolved, yet must be tracked and distinguished for neighboring closely spaced objects. Tracking vehicles in an urban environment is an example of such a challenging scenario. This report evaluates several potential tracking algorithms for large-scale tracking in an urban environment.

  16. Classification and Reevaluation on Radionuclide and Activity of Contaminated Soil(I)

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Il Sik; Shon, J. S.; Kim, K. J.; Kim, T. K.; Hong, D. S.; Lee, B. C.; Cho, H. S.; Je, W. G


    Radioactive wastes generated during the decommissioning process and contaminated soils were transported and have been stored at the waste storage facility. The radioactivity in the wastes has been decayed a lot. The radionuclide and the activity concentration of stored soil wastes were reevaluated. And using the reevaluation results, the soil wastes were classified as either a regulatory clearance wastes or a radioactive waste. The storage space can be secured by storing regulatory clearance wastes in the extra storage facility and self disposing them. Also, the objective is to protect the environment from contamination by observing the related nuclear regulation and managing the radioactive wastes. Through the reevaluation of radioactivity and classification of contaminated soils, the unnecessary decontamination of uncontaminated soil was prevented. It allowed us to save the cost for decontamination and disposal, also we could secure the pretreatment process techniques such as how to sample and analyze the nuclide.

  17. Statistical modelling approach to derive quantitative nanowastes classification index; estimation of nanomaterials exposure

    CSIR Research Space (South Africa)

    Ntaka, L


    Full Text Available on the toxicity of ENMs to biological life forms in the ecosystems, and secondly, owing to rapid generation of new waste streams previously unknown and generically regarded as nanowastes. Currently, nanowastes classification remains poorly studied despite...

  18. [Another seizure classification--Semiological Seizure Classification]. (United States)

    Lin, Ji-Ho; Kwan, Shang-Yeong; Wu, Dean; Su, Min-Shin; Yiu, Chun-Hing


    The International League Against Epilepsy (ILAE) introduced in 1981 a seizure classification based on clinical semiology, interictal EEG findings, and ictal EEG patterns. Such classification depends heavily on detailed electroclinical correlation. After 20 years' progress in epileptology, many clinicians have found it difficult to make a "definite" seizure diagnosis clinically without a series of electrophysiological examinations, particularly in the infants, and further advancement in epileptology has findings have made the previous classification inefficient. Lüders and colleagues have proposed a classification, Semiological Seizure Classification (SSC), based exclusively on ictal semiology, which was published in the official journal of ILAE-EPILEPSIA in 1998. The EEG, neuroimaging and other laboratory results should be analyzed separately and then integrated to define the epileptic syndromes. The seizure diagnosis is thus made through a "what-you-see-is-what-you-get" way. It has also provoked an extensive discussion about the necessity of this new classification. In this review, we present the original guideline, which has been used at The Cleveland Clinic Foundation for years, to introduce another method of epileptic seizure classification.

  19. Why we are tracking

    DEFF Research Database (Denmark)

    Tække, Jesper


    In this short essay, concerning why we are tracking, I will try to frame tracking as an evolutionary developed skill that humans need to survive. From an evolutionary point zero life must reflect upon itself in regard to its surrounding world as a kind of societal self-synchronization in this reg......In this short essay, concerning why we are tracking, I will try to frame tracking as an evolutionary developed skill that humans need to survive. From an evolutionary point zero life must reflect upon itself in regard to its surrounding world as a kind of societal self......-synchronization in this regard (Spencer 1890, Luhmann 2000, Tække 2014, 2011). I was inspired by Jill Walker Rettberg’s book: “Seeing Ourselves through Technology” and her presentation at the seminar: “Tracking Culture” arranged by Anders Albrechtslund in Aarhus January 2015....


    Energy Technology Data Exchange (ETDEWEB)


    Revision 75 of the Tracked Vehicle software is a soft real-time simulation of a differentially steered, tracked mobile robot, which, because of the track flippers, resembles the iRobot PackBot ( Open source libraries are used for the physics engine (, the display and user interface (, and the program command line and configuration file parameters ( The simulation can be controlled by a USB joystick or the keyboard. The configuration file contains demonstration model parameters of no particular vehicle. This simulation can be used as a starting point for those doing tracked vehicle simulations. This simulation software is essentially a research tool which can be modified and adapted for certain types of tracked vehicle research. An open source license allows an individual researchers to tailor the code to their specific research needs.

  1. Persistent Aerial Tracking

    KAUST Repository

    Mueller, Matthias


    In this thesis, we propose a new aerial video dataset and benchmark for low altitude UAV target tracking, as well as, a photo-realistic UAV simulator that can be coupled with tracking methods. Our benchmark provides the rst evaluation of many state of-the-art and popular trackers on 123 new and fully annotated HD video sequences captured from a low-altitude aerial perspective. Among the compared trackers, we determine which ones are the most suitable for UAV tracking both in terms of tracking accuracy and run-time. We also present a simulator that can be used to evaluate tracking algorithms in real-time scenarios before they are deployed on a UAV "in the field", as well as, generate synthetic but photo-realistic tracking datasets with free ground truth annotations to easily extend existing real-world datasets. Both the benchmark and simulator will be made publicly available to the vision community to further research in the area of object tracking from UAVs. Additionally, we propose a persistent, robust and autonomous object tracking system for unmanned aerial vehicles (UAVs) called Persistent Aerial Tracking (PAT). A computer vision and control strategy is applied to a diverse set of moving objects (e.g. humans, animals, cars, boats, etc.) integrating multiple UAVs with a stabilized RGB camera. A novel strategy is employed to successfully track objects over a long period, by \\'handing over the camera\\' from one UAV to another. We integrate the complete system into an off-the-shelf UAV, and obtain promising results showing the robustness of our solution in real-world aerial scenarios.

  2. Methods for tracking the motion and temperature histories of fuel particles in grate furnaces and waste incinerators - phase 2; Metoder foer kartlaeggning av braenslepartiklars roerelse- och temperaturhistorik i rosterpannor och avfallsugnar - etapp 2

    Energy Technology Data Exchange (ETDEWEB)

    Blom, Elisabet; Gustavsson, Lennart; Oskarsson, Jan; Petersson, Mats


    The objective of this project has been to demonstrate and evaluate the feasibility of some proposed measuring methods for tracking the motion and temperature history of fuel particles in a grate furnace through full-scale trials. The methods use radioactive isotopes and are based on marking of single fuel particles. The methods have the following objectives: To continuously track the motion of a single fuel particle from the fuel feed to the burn-out; To determine when a fuel particle arrives at certain temperatures; To study the drying process for a fuel particle; To determine the density in different parts of the fuel bed. The method for continuous position determination is based on the construction of a mathematical model of the dimensions and materials of the furnace. Detectors are placed in a number of positions on the outside of the furnace, and the model is then calibrated with a radioactive source placed in a number of given positions inside the furnace. When using the method, fuel particles marked with the radioactive isotope {sup 24}Na is fed to the fuel inlet. From the detector signals the position of the source can be continuously determined. The full-scale trials showed that the uncertainty in the position determination was greater than expected. At the calibration, the mean error of the position determination was 0,62 m, and the error was less than 0,5 m for 80% of the calibration positions. At the trials during boiler operation the results from the original calculation model were partly not reasonable, i.e. in that positions outside the possible volume were achieved during certain periods. However, some conclusions about the time scales could be drawn, e.g. about the residence times on different parts of the grate. A number of factors are thought to contribute to the low accuracy. The number of detectors influences the accuracy, and during the boiler operation trials one detector ceased to function. Further it was assumed in the model that the

  3. Methods for tracking the motion and temperature history of fuel particles in grate furnaces and waste boilers; Metoder foer kartlaeggning av braenslepartiklars roerelse- och temperaturhistorik i rosterpannor och avfallsugnar - etapp 2

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Lennart; Blom, Elisabet; Oskarsson, Jan; Petersson, Mats [Swedish National Testing and Research Inst., Boraas (Sweden)


    The objective of this project has been to demonstrate and evaluate the feasibility of some proposed measuring methods for tracking the motion and temperature history of fuel particles in a grate furnace through full-scale trials. The methods use radioactive isotopes and are based on marking of single fuel particles. The methods have the following objectives: To continuously track the motion of a single fuel particle from the fuel feed to the burn-out; To determine when a fuel particle arrives at certain temperatures; To study the drying process for a fuel particle; To determine the density in different parts of the fuel bed. The method for continuous position determination is based on the construction of a mathematical model of the dimensions and materials of the furnace. Detectors are placed in a number of positions on the outside of the furnace, and the model is then calibrated with a radioactive source placed in a number of given positions inside the furnace. When using the method, fuel particles marked with the radioactive isotope Na is fed to the fuel inlet. From the detector signals the position of the source can be continuously determined. The full-scale trials showed that the uncertainty in the position determination was greater than expected. At the calibration, the mean error of the position determination was 0,62 m, and the error was less than 0,5 m for 80 % of the calibration positions. At the trials during boiler operation the results from the original calculation model were partly not reasonable, i.e. in that positions outside the possible volume were achieved during certain periods. However, some conclusions about the time scales could be drawn, e.g. about the residence times on different parts of the grate. A number of factors are thought to contribute to the low accuracy. The number of detectors influences the accuracy, and during the boiler operation trials one detector ceased to function. Further it was assumed in the model that the density of

  4. Waste tire recycling by pyrolysis

    Energy Technology Data Exchange (ETDEWEB)


    This project examines the City of New Orleans` waste tire problem. Louisiana State law, as of January 1, 1991, prohibits the knowing disposal of whole waste tires in landfills. Presently, the numerous waste tire stockpiles in New Orleans range in size from tens to hundreds of tires. New Orleans` waste tire problem will continue to increase until legal disposal facilities are made accessible and a waste tire tracking and regulatory system with enforcement provisions is in place. Tires purchased outside of the city of New Orleans may be discarded within the city`s limits; therefore, as a practical matter this study analyzes the impact stemming from the entire New Orleans metropolitan area. Pyrolysis mass recovery (PMR), a tire reclamation process which produces gas, oil, carbon black and steel, is the primary focus of this report. The technical, legal and environmental aspects of various alternative technologies are examined. The feasibility of locating a hypothetical PMR operation within the city of New Orleans is analyzed based on the current economic, regulatory, and environmental climate in Louisiana. A thorough analysis of active, abandoned, and proposed Pyrolysis operations (both national and international) was conducted as part of this project. Siting a PMR plant in New Orleans at the present time is technically feasible and could solve the city`s waste tire problem. Pending state legislation could improve the city`s ability to guarantee a long term supply of waste tires to any large scale tire reclamation or recycling operation, but the local market for PMR end products is undefined.

  5. Waste tire recycling by pyrolysis

    Energy Technology Data Exchange (ETDEWEB)


    This project examines the City of New Orleans' waste tire problem. Louisiana State law, as of January 1, 1991, prohibits the knowing disposal of whole waste tires in landfills. Presently, the numerous waste tire stockpiles in New Orleans range in size from tens to hundreds of tires. New Orleans' waste tire problem will continue to increase until legal disposal facilities are made accessible and a waste tire tracking and regulatory system with enforcement provisions is in place. Tires purchased outside of the city of New Orleans may be discarded within the city's limits; therefore, as a practical matter this study analyzes the impact stemming from the entire New Orleans metropolitan area. Pyrolysis mass recovery (PMR), a tire reclamation process which produces gas, oil, carbon black and steel, is the primary focus of this report. The technical, legal and environmental aspects of various alternative technologies are examined. The feasibility of locating a hypothetical PMR operation within the city of New Orleans is analyzed based on the current economic, regulatory, and environmental climate in Louisiana. A thorough analysis of active, abandoned, and proposed Pyrolysis operations (both national and international) was conducted as part of this project. Siting a PMR plant in New Orleans at the present time is technically feasible and could solve the city's waste tire problem. Pending state legislation could improve the city's ability to guarantee a long term supply of waste tires to any large scale tire reclamation or recycling operation, but the local market for PMR end products is undefined.

  6. Hazardous waste status of discarded electronic cigarettes

    Energy Technology Data Exchange (ETDEWEB)

    Krause, Max J.; Townsend, Timothy G., E-mail:


    Highlights: • Electronic cigarettes were tested using TCLP and WET. • Several electronic cigarette products leached lead at hazardous waste levels. • Lead was the only element that exceeded hazardous waste concentration thresholds. • Nicotine solution may cause hazardous waste classification when discarded unused. - Abstract: The potential for disposable electronic cigarettes (e-cigarettes) to be classified as hazardous waste was investigated. The Toxicity Characteristic Leaching Procedure (TCLP) was performed on 23 disposable e-cigarettes in a preliminary survey of metal leaching. Based on these results, four e-cigarette products were selected for replicate analysis by TCLP and the California Waste Extraction Test (WET). Lead was measured in leachate as high as 50 mg/L by WET and 40 mg/L by TCLP. Regulatory thresholds were exceeded by two of 15 products tested in total. Therefore, some e-cigarettes would be toxicity characteristic (TC) hazardous waste but a majority would not. When disposed in the unused form, e-cigarettes containing nicotine juice would be commercial chemical products (CCP) and would, in the United States (US), be considered a listed hazardous waste (P075). While household waste is exempt from hazardous waste regulation, there are many instances in which such waste would be subject to regulation. Manufactures and retailers with unused or expired e-cigarettes or nicotine juice solution would be required to manage these as hazardous waste upon disposal. Current regulations and policies regarding the availability of nicotine-containing e-cigarettes worldwide were reviewed. Despite their small size, disposable e-cigarettes are consumed and discarded much more quickly than typical electronics, which may become a growing concern for waste managers.

  7. Determination of Waste Groupings for Safety Analyses

    Energy Technology Data Exchange (ETDEWEB)

    BARKER, S.A.


    Two workshops were held in May and July 1999 to review data analysis methodologies associated with the analysis of flammable gas behavior. The workshop participants decided that missing data could he estimated by using a distribution of values that encompassed tanks with wastes that behaved in a similar fashion. It was also determined that because of the limited amount of tank data pertaining to flammable gas generation and retention, it was not justified to divide the tanks into many small waste groupings. The purpose for grouping tanks is so that limited gas retention and release data, which may be available for some tanks within a group, can be applied to other tanks containing the same waste form. This is necessary when estimating waste properties for tanks with missing or incomplete information. Following the workshop, a preliminary tank grouping was prepared based on content of solids, liquids, sludge, saltcake, or salt slurry The saltcake and salt slurry were then grouped together and referred to as saltcake/salt slurry. Initial tank classifications were based on waste forms from the Rest Basis Inventory, the Hanford Defined Waste (HDW) (''Agnew'') Model, or the Waste Tank Summary (''Hanlon'') Report The results of this grouping arc presented in ''Flamable Gas Safety Analysis Data Review'', SNL-000 198 (Barker, et al., 1999). At the time of the release of SNL-000198, tank waste inventories were not consistent between published sources, such as the ''Best Basis Inventory'' and the ''Waste Tank Summary Report for Month Ending August 31, 1999'' (Hanlon l999). This calculation note documents the process and basis used when revising the waste groupings following the release of SNL-000198. The waste layer volume information is compared between the various databases, including information obtained from process measurements. Differences are then resolved based on tank

  8. Classificação dos resíduos de serviços de saúde de um hospital veterinário Classification of health services waste from a veterinary hospital

    Directory of Open Access Journals (Sweden)

    Rosane Regina Pilger


    Full Text Available O trabalho avalia aspectos referentes à classificação e segregação dos resíduos gerados no Hospital Veterinário da Ulbra (RS, a partir de estudos realizados para a elaboração do Plano de Gerenciamento dos Resíduos de Serviço de Saúde (PGRSS, para a instituição. O plano foi baseado na resolução RDC nº 306/2004 da ANVISA (Brasil, 2004, que define as diretrizes para o manejo dos resíduos de instituições de saúde, incluindo a segregação, coleta, armazenamento, transporte interno e externo, tratamento e disposição final. A partir da caracterização, classificação e do diagnóstico das atividades de manejo dos resíduos do hospital, foi possível avaliar a importância da segregação, no local de origem, para a redução de resíduos que necessitam de tratamentos especiais, bem como para a redução de riscos de propagação de doenças.This work evaluates some referring aspects to the residues classification and segregation generated in Ulbra’s Veterinary Hospital (RS, starting from studies accomplished in the elaboration of a Residues Health Service Management Plan (PGRSS, for the institution. The plan was based on RDC nº 306/2004 ANVISA’s Resolution (Brasil, 2004, that defines the guidelines for handling the health institutions residues, including the segregation, collection, storage, internal and external transportation, treatment and final disposition. From the characterization, classification and the diagnostic handling activities of hospital residues, it was possible to evaluate the segregation importance, in the origin location, for the residues reduction that need special treatments, as well as for the risks reduction of diseases propagation.

  9. A data set for evaluating the performance of multi-class multi-object video tracking (United States)

    Chakraborty, Avishek; Stamatescu, Victor; Wong, Sebastien C.; Wigley, Grant; Kearney, David


    One of the challenges in evaluating multi-object video detection, tracking and classification systems is having publically available data sets with which to compare different systems. However, the measures of performance for tracking and classification are different. Data sets that are suitable for evaluating tracking systems may not be appropriate for classification. Tracking video data sets typically only have ground truth track IDs, while classification video data sets only have ground truth class-label IDs. The former identifies the same object over multiple frames, while the latter identifies the type of object in individual frames. This paper describes an advancement of the ground truth meta-data for the DARPA Neovision2 Tower data set to allow both the evaluation of tracking and classification. The ground truth data sets presented in this paper contain unique object IDs across 5 different classes of object (Car, Bus, Truck, Person, Cyclist) for 24 videos of 871 image frames each. In addition to the object IDs and class labels, the ground truth data also contains the original bounding box coordinates together with new bounding boxes in instances where un-annotated objects were present. The unique IDs are maintained during occlusions between multiple objects or when objects re-enter the field of view. This will provide: a solid foundation for evaluating the performance of multi-object tracking of different types of objects, a straightforward comparison of tracking system performance using the standard Multi Object Tracking (MOT) framework, and classification performance using the Neovision2 metrics. These data have been hosted publically.

  10. Classification, disease, and diagnosis. (United States)

    Jutel, Annemarie


    Classification shapes medicine and guides its practice. Understanding classification must be part of the quest to better understand the social context and implications of diagnosis. Classifications are part of the human work that provides a foundation for the recognition and study of illness: deciding how the vast expanse of nature can be partitioned into meaningful chunks, stabilizing and structuring what is otherwise disordered. This article explores the aims of classification, their embodiment in medical diagnosis, and the historical traditions of medical classification. It provides a brief overview of the aims and principles of classification and their relevance to contemporary medicine. It also demonstrates how classifications operate as social framing devices that enable and disable communication, assert and refute authority, and are important items for sociological study.

  11. Classification of remotely sensed images

    CSIR Research Space (South Africa)

    Dudeni, N


    Full Text Available images N. Dudeni, P. Debba Introduction to Remote Sensing Introduction to Image Classification Objective of the study Classification algorithms by group Unsupervised algorithms Supervised classification algorithms Spatial... of remotely sensed images N. Dudeni, P. Debba Introduction to Remote Sensing Introduction to Image Classification Objective of the study Classification algorithms by group Unsupervised algorithms Supervised classification algorithms...

  12. Waste disposal

    CERN Multimedia


    We should like to remind you that you can have all commonplace, conventional waste (combustible, inert, wood, etc.) disposed of by the TS-FM Group. Requests for the removal of such waste should be made by contacting FM Support on tel. 77777 or by e-mail ( For requests to be acted upon, the following information must be communicated to FM Support: budget code to be debited for the provision and removal of the skip / container; type of skip required (1m3, 4 m3, 7 m3, 15 m3, 20 m3, 30 m3); nature of the waste to be disposed of (bulky objects, cardboard boxes, etc.); building concerned; details of requestor (name, phone number, department, group, etc.). We should also like to inform you that the TS-FM Group can arrange for waste to be removed from work-sites for firms under contract to CERN, provided that the prior authorisation of the CERN Staff Member in charge of the contract is obtained and the relevant disposal/handling charges are paid. You are reminded that the selective sorting...

  13. Waste disposal

    CERN Multimedia


    We should like to remind you that you can have all commonplace, conventional waste (combustible, inert, wood, etc.) disposed of by the TS-FM Group. Requests for the removal of such waste should be made by contacting FM Support on tel. 77777 or by e-mail ( For requests to be acted upon, the following information must be communicated to FM Support: budget code to be debited for the provision and removal of the skip / container. type of skip required (1m3, 4 m3, 7 m3, 15 m3, 20 m3, 30 m3). nature of the waste to be disposed of (bulky objects, cardboard boxes, etc.). building concerned. details of requestor (name, phone number, department, group, etc.). We should also like to inform you that the TS-FM Group can arrange for waste to be removed from work-sites for firms under contract to CERN, provided that the prior authorisation of the CERN Staff Member in charge of the contract is obtained and the relevant disposal/handling charges are paid. You are reminded that the selective sorting o...

  14. Human waste

    NARCIS (Netherlands)

    Amin, Md Nurul; Kroeze, Carolien; Strokal, Maryna


    Many people practice open defecation in south Asia. As a result, lot of human waste containing nutrients such as nitrogen (N) and phosphorus (P) enter rivers. Rivers transport these nutrients to coastal waters, resulting in marine pollution. This source of nutrient pollution is, however, ignored in

  15. Dairy Wastes. (United States)

    Pico, Richard F.


    Presents a literature review of wastes from the dairy industry covering publications of 1976-77. This review covers: (1) government regulations; (2) ion-plant control of dairy effluents; (3) dairy effluent treatment methods; and (4) research on dairy effluents. A list of 26 references is also presented. (HM)

  16. System design description for Waste Information and Control System

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.R.


    The Westinghouse Hanford Company (WHC) Hazardous Material Control Group (HMC) of the 222-S Laboratory has requested the development of a system to help resolve many of the difficulties associated with tracking and data collection of containers and drums of waste. This system has been identified as the Waste Information and Control System (WICS). WICS shall partially automate the procedure for acquisition, tracking and reporting of the container, drum, and waste data that is currently manually processed. The WICS project shall use handheld computer units (HCU) to collect laboratory data, a local database with an user friendly interface to import the laboratory data from the HCUs, and barcode technology with associated software and operational procedures. After the container, drum, and waste data has been collected and verified, WICS shall be manipulated to provide informal reports containing data required to properly document waste disposal. 8 refs, 82 figs, 69 tabs.

  17. Waste reduction through consumer education. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, E.Z.


    The Waste Reduction through Consumer Education research project was conducted to determine how environmental educational strategies influence purchasing behavior in the supermarket. The objectives were to develop, demonstrate, and evaluate consumer education strategies for waste reduction. The amount of waste generated by packaging size and form, with an adjustment for local recyclability of waste, was determined for 14 product categories identified as having more waste generating and less waste generating product choices (a total of 484 products). Using supermarket scan data and shopper identification numbers, the research tracked the purchases of shoppers in groups receiving different education treatments for 9 months. Statistical tests applied to the purchase data assessed patterns of change between the groups by treatment period. Analysis of the data revealed few meaningful statistical differences between study groups or changes in behavior over time. Findings suggest that broad brush consumer education about waste reduction is not effective in changing purchasing behaviors in the short term. However, it may help create a general awareness of the issues surrounding excess packaging and consumer responsibility. The study concludes that the answer to waste reduction in the future may be a combination of voluntary initiatives by manufacturers and retailers, governmental intervention, and better-informed consumers.

  18. Agency Correspondence Tracking System (ACTS) (United States)

    US Agency for International Development — Agency Correspondence Tracking System: is an executive correspondence tracking system for the Administrator. It collects and organizes information on reports...

  19. Recursive heuristic classification (United States)

    Wilkins, David C.


    The author will describe a new problem-solving approach called recursive heuristic classification, whereby a subproblem of heuristic classification is itself formulated and solved by heuristic classification. This allows the construction of more knowledge-intensive classification programs in a way that yields a clean organization. Further, standard knowledge acquisition and learning techniques for heuristic classification can be used to create, refine, and maintain the knowledge base associated with the recursively called classification expert system. The method of recursive heuristic classification was used in the Minerva blackboard shell for heuristic classification. Minerva recursively calls itself every problem-solving cycle to solve the important blackboard scheduler task, which involves assigning a desirability rating to alternative problem-solving actions. Knowing these ratings is critical to the use of an expert system as a component of a critiquing or apprenticeship tutoring system. One innovation of this research is a method called dynamic heuristic classification, which allows selection among dynamically generated classification categories instead of requiring them to be prenumerated.

  20. Security classification of information

    Energy Technology Data Exchange (ETDEWEB)

    Quist, A.S.


    This document is the second of a planned four-volume work that comprehensively discusses the security classification of information. The main focus of Volume 2 is on the principles for classification of information. Included herein are descriptions of the two major types of information that governments classify for national security reasons (subjective and objective information), guidance to use when determining whether information under consideration for classification is controlled by the government (a necessary requirement for classification to be effective), information disclosure risks and benefits (the benefits and costs of classification), standards to use when balancing information disclosure risks and benefits, guidance for assigning classification levels (Top Secret, Secret, or Confidential) to classified information, guidance for determining how long information should be classified (classification duration), classification of associations of information, classification of compilations of information, and principles for declassifying and downgrading information. Rules or principles of certain areas of our legal system (e.g., trade secret law) are sometimes mentioned to .provide added support to some of those classification principles.

  1. Siamese convolutional networks for tracking the spine motion (United States)

    Liu, Yuan; Sui, Xiubao; Sun, Yicheng; Liu, Chengwei; Hu, Yong


    Deep learning models have demonstrated great success in various computer vision tasks such as image classification and object tracking. However, tracking the lumbar spine by digitalized video fluoroscopic imaging (DVFI), which can quantitatively analyze the motion mode of spine to diagnose lumbar instability, has not yet been well developed due to the lack of steady and robust tracking method. In this paper, we propose a novel visual tracking algorithm of the lumbar vertebra motion based on a Siamese convolutional neural network (CNN) model. We train a full-convolutional neural network offline to learn generic image features. The network is trained to learn a similarity function that compares the labeled target in the first frame with the candidate patches in the current frame. The similarity function returns a high score if the two images depict the same object. Once learned, the similarity function is used to track a previously unseen object without any adapting online. In the current frame, our tracker is performed by evaluating the candidate rotated patches sampled around the previous frame target position and presents a rotated bounding box to locate the predicted target precisely. Results indicate that the proposed tracking method can detect the lumbar vertebra steadily and robustly. Especially for images with low contrast and cluttered background, the presented tracker can still achieve good tracking performance. Further, the proposed algorithm operates at high speed for real time tracking.

  2. LHCb VELO Tracking Resolutions

    CERN Multimedia

    Alexander, Michael


    The excellent tracking performance of the Vertex Locator (VELO) at LHCb is presented. The resolutions it achieves on single hits, impact parameters, and primary vertex positions are shown, with particular attention paid to measurement of impact parameters.

  3. Applied eye tracking research

    NARCIS (Netherlands)

    Jarodzka, Halszka


    Jarodzka, H. (2010, 12 November). Applied eye tracking research. Presentation and Labtour for Vereniging Gewone Leden in oprichting (VGL i.o.), Heerlen, The Netherlands: Open University of the Netherlands.

  4. LHCb on track

    CERN Document Server


    On 7 and 8 June 2006, the last large component of the LHCb experiment was lowered into the cavern. This 10-tonne, 18-metre long metal structure known as 'the bridge' will support the LHCb tracking system.

  5. Neonate turtle tracking data (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of this project are to use novel satellite tracking methods to provide improved estimation of threats at foraging areas and along migration routes for...

  6. Procurement Tracking System (PTS) (United States)

    Office of Personnel Management — The Procurement Tracking System (PTS) is used solely by the procurement staff of the Office of the Inspector General (OIG) at the U.S. Office of Personnel Management...

  7. Track Loading Vehicle - TLV (United States)

    Federal Laboratory Consortium — The TLV is designed to apply forces close to the strength limits of the rails and other track structure components, such as ties, rail fasteners, and ballast, while...


    National Aeronautics and Space Administration — The Mars Pathfinder (MPF) Radio Science (RS) data archive contains both raw radio tracking data collected during the surface lifetime of the MPF Lander and results...

  9. Human Capital Tracking Tool - (United States)

    Department of Transportation — AVS is now required to collect, track, and report on data from the following Flight, Business and Workforce Plan. The Human Resource Management’s Performance Target...

  10. Case Analysis Tracking System (United States)

    National Archives and Records Administration — CATS tracks Public and Federal Agency Reference Requests for OPF (Official Personnel Folder) , EMF (Employee Medical Folder), and eOPF (electronic Official Personnel...

  11. Matter Tracking Information System - (United States)

    Department of Transportation — The Matter Tracking Information System (MTIS) principle function is to streamline and integrate the workload and work activity generated or addressed by our 300 plus...

  12. Energy Tracking Software Platform

    Energy Technology Data Exchange (ETDEWEB)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles


    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. ( helps homeowners conserve energy through education and competition. helps renters factor energy usage into their housing decisions.

  13. Financial Disclosure Tracking System (United States)

    US Agency for International Development — USAID's FDTS identifies personal service contractors and local employees who should file disclosure reports. It tracks late filers and identifies those who must take...

  14. Changes in waste legislation – What can be expected

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH


    Full Text Available • Draft Waste Classification and Management Regulations • Draft Standards for Assessment of Waste for Landfill Disposal • Draft National Standard for Disposal of Waste to Landfill • Conclusions © CSIR 2013 2...] for a similar or different purpose without changing the form or properties of the articles © CSIR 2013 8 9 Definitions - Waste • ‘Waste’ means any substance, whether or not that substance can be reduced, re...

  15. Recycling and Utilization of Waste Glass Fiber Reinforced Plastics

    Directory of Open Access Journals (Sweden)

    Feng Yan-chao


    Full Text Available This paper mainly introduced the recovery method, classification and comprehensive utilization process of waste glass fiber reinforced plastics (GFRP. Among the current methods of utilization, the physical method is most promising. After pre-processing of waste GFRP, the short glass fiber can be used in gypsum block to improve the anti-cracking and operation performance of the material; waste GFRP powder can be used in plastic fiber reinforced manhole covers to increase the mechanical strength, and the products conformed to JC 1009-2006. Based on these studies, we also point out some problems concerning the utilization of waste glass fiber reinforced plastics.

  16. Classification of Flotation Frothers

    Directory of Open Access Journals (Sweden)

    Jan Drzymala


    Full Text Available In this paper, a scheme of flotation frothers classification is presented. The scheme first indicates the physical system in which a frother is present and four of them i.e., pure state, aqueous solution, aqueous solution/gas system and aqueous solution/gas/solid system are distinguished. As a result, there are numerous classifications of flotation frothers. The classifications can be organized into a scheme described in detail in this paper. The frother can be present in one of four physical systems, that is pure state, aqueous solution, aqueous solution/gas and aqueous solution/gas/solid system. It results from the paper that a meaningful classification of frothers relies on choosing the physical system and next feature, trend, parameter or parameters according to which the classification is performed. The proposed classification can play a useful role in characterizing and evaluation of flotation frothers.

  17. Working towards a zero waste environment in Taiwan. (United States)

    Young, Chea-Yuan; Ni, Shih-Piao; Fan, Kuo-Shuh


    It is essential to the achievement of zero waste that emphasis is concentrated on front-end preventions rather than end-of-pipe (EOP) treatment. Zero waste is primarily based on cleaner production, waste management, the reduction of unnecessary consumption and the effective utilization of waste materials. The aim of this study was to briefly review the tasks undertaken and future plans for achieving zero waste in Taiwan. Waste prevention, source reduction, waste to product, waste to energy, EOP treatment, and adequate disposal are the sequential principal procedures to achieve the goal of zero waste. Six strategies have been adopted to implement the zero waste policy in Taiwan. These are regulatory amendments, consumption education, financial incentives, technical support, public awareness, and tracking and reporting. Stepwise targets have been set for 2005, 2007, 2011, and 2020 for both the municipal solid waste (MSW) and industrial waste to reach the goal of zero waste. The eventual aim is to achieve 70% MSW minimization and 85% industrial waste minimization by 2020. Although tools and measures have been established, some key programmes have higher priority. These include the establishment of a waste recycling programme, promotion of cleaner production, a green procurement programme, and promotion of public awareness. Since the implementation of the zero waste policy started in 2003, the volume of MSW for landfill and incineration has declined dramatically. The recycling and/or minimization of MSW quantity in 2007 was 37%, which is much higher than the goal of 25%. Industrial waste reached almost 76% minimization by the end of 2006, which is 1 year before the target year.

  18. Statistical classification of images


    Giuliodori, María Andrea


    Image classification is a burgeoning field of study. Despite the advances achieved in this camp, there is no general agreement about what is the most effective methods for the classification of digital images. This dissertation contributes to this line of research by developing different statistical methods aim to classifying digital images. In Chapter 1 we introduce basic concepts of image classification and review some results and methodologies proposed previously in the literature. In Chap...

  19. Towards secondary fingerprint classification

    CSIR Research Space (South Africa)

    Msiza, IS


    Full Text Available fingerprints that have a ?x that is greater than 30 pixels, and the same reasoning can be attributed to the mis-classification of some of the RL class fingerprints. Possible 2011 International Conference on Computer Engineering and Applications (ICCEA 2011...]. Even though the concept of sample classification applies to systems that use almost any biometric modality, this manuscript focuses on fingerprint classification, with immediate application to an automated fingerprint recog- nition system...

  20. Thirteenth annual U.S. DOE low-level radioactive waste management conference: Proceedings

    Energy Technology Data Exchange (ETDEWEB)



    The 40 papers in this document comprise the proceedings of the Department of Energy`s Thirteenth Annual Low-Level Radioactive Waste Management Conference that was held in Atlanta, Georgia, on November 19--21, 1991. General subjects addressed during the conference included: disposal facility design; greater-than-class C low-level waste; public acceptance considerations; waste certification; site characterization; performance assessment; licensing and documentation; emerging low-level waste technologies; waste minimization; mixed waste; tracking and transportation; storage; and regulatory changes. Papers have been processed separately for inclusion on the data base.

  1. Evaluation of the optical flow methods on facial expression classification (United States)

    Haghighat, Mohammad; Amirkabiri Razian, Masoud


    Facial expression recognition is an important issue in modern human computer interaction (HCI). In this work, the performance of optical flow in tracking facial characteristic points (FCPs) is examined and it is used as an application of facial expression classification. FCPs are extracted using active appearance model (AAM), and the features selected to the classification are the perceived movements of the FCPs and the changes in geometric distance between them. This work compares four different optical flow methods on FCP tracking: normalized cross-correlation, Lucas-Kanade, Brox, and Liu-Freeman. Nearest neighborhood rule is used for the classification. Evaluations are done on the Cohn-Kanade (CK +) database for five prototypic expressions. Experimental results show that Lucas-Kanade method outperforms the other three optical flow methods. This has been assessed based on ground truth established in CK + database.

  2. Analysis of the Institutional Framework For Radioactive Waste Management in Indonesia

    Directory of Open Access Journals (Sweden)

    D.S. Wisnubroto


    Full Text Available The analysis of the infrastructure for radioactive waste management in Indonesia has been studied using several parameters, i.e. policy, regulatory authorities and their regulations, implementing organizations and financial system. By considering the international trends and the Indonesian program to utilize nuclear power, the infrastructure of radioactive waste management needs to be improved. The Act No. 10/1997 on Nuclear Energy for the future beneficence will have to be amended to incorporate several missing key points on waste management, such as definition of radioactive waste, disposal of Low and Intermediate Level Waste (LILW, and classification of waste. Full involvement of some important stakeholders, especially the State Ministry of Environment, on the radioactive waste management infrastructure is required since some radioactive waste is generated from non nuclear waste. Assigning full authority to the State Ministry of Environment for regulating radioactive waste generated by non nuclear facilities may be more effective, whereas BAPETEN is still holding onto control over the waste generated from nuclear facilities. In the near future, several regulations on clearance level, classification of waste, NORM/TENORM, and financial system are expected to be set up for urgent need. By considering the high risk for handling of radioactivity, including for transportation and storage, the liability or assurance of the safety for such activities must be accounted for. Finally, establishment of financial system for long term waste management in Indonesia needs to be implemented to ensure that the radioactive waste will not be the burden on future generations.

  3. Rethinking the waste hierarchy

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, C.; Vigsoe, D. (eds.)


    There is an increasing need to couple environmental and economic considerations within waste management. Consumers and companies alike generate ever more waste. The waste-policy challenges of the future lie in decoupling growth in waste generation from growth in consumption, and in setting priorities for the waste management. This report discusses the criteria for deciding priorities for waste management methods, and questions the current principles of EU waste policies. The basis for the discussion is the so-called waste hierarchy which has dominated the waste policy in the EU since the mid-1970s. The waste hierarchy ranks possible methods of waste management. According to the waste hierarchy, the very best solution is to reduce the amount of waste. After that, reuse is preferred to recycling which, in turn, is preferred to incineration. Disposal at a landfill is the least favourable solution. (BA)

  4. Closed Fuel Cycle Waste Treatment Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, J. D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Collins, E. D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Crum, J. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ebert, W. L. [Argonne National Lab. (ANL), Argonne, IL (United States); Frank, S. M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Garn, T. G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gombert, D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jubin, R. T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Maio, V. C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Marra, J. C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Matyas, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nenoff, T. M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Riley, B. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sevigny, G. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Soelberg, N. R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Strachan, D. M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Thallapally, P. K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, J. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)


    with encapsulated nano-sized AgI crystals; Carbon-14 immobilized as a CaCO3 in a cement waste form; Krypton-85 stored as a compressed gas; An aqueous reprocessing high-level waste (HLW) raffinate waste immobilized by the vitrification process; An undissolved solids (UDS) fraction from aqueous reprocessing of LWR fuel either included in the borosilicate HLW glass or immobilized in the form of a metal alloy or titanate ceramics; Zirconium-based LWR fuel cladding hulls and stainless steel (SS) fuel assembly hardware super-compacted for disposal or purified for reuse (or disposal as low-level waste, LLW) of Zr by reactive gas separations; Electrochemical process salt HLW incorporated into a glass bonded Sodalite waste form; and Electrochemical process UDS and SS cladding hulls melted into an iron based alloy waste form. Mass and volume estimates for each of the recommended waste forms based on the source terms from a representative flowsheet are reported. In addition to the above listed primary waste streams, a range of secondary process wastes are generated by aqueous reprocessing of LWR fuel, metal SFR fuel fabrication, and electrochemical reprocessing of SFR fuel. These secondary wastes have been summarized and volumes estimated by type and classification. The important waste management data gaps and research needs have been summarized for each primary waste stream and selected waste process.

  5. Other Special Waste

    DEFF Research Database (Denmark)

    Brogaard, Line Kai-Sørensen; Christensen, Thomas Højlund


    separately from MSW. Some of these other special wastes are briefly described in this chapter with respect to their definition, quantity and composition, and management options. The special wastes mentioned here are batteries, tires, polyvinylchloride (PVC) and food waste.......In addition to the main types of special waste related to municipal solid waste (MSW) mentioned in the previous chapters (health care risk waste, WEEE, impregnated wood, hazardous waste) a range of other fractions of waste have in some countries been defined as special waste that must be handled...

  6. Luge Track Safety

    CERN Document Server

    Hubbard, Mont


    Simple geometric models of ice surface shape and equations of motion of objects on these surfaces can be used to explain ejection of sliders from ice tracks. Simulations using these can be used to explain why certain design features can be viewed as proximate causes of ejection from the track and hence design flaws. This paper studies the interaction of a particle model for the luge sled (or its right runner) with the ice fillet commonly connecting inside vertical walls and the flat track bottom. A numerical example analyzes the 2010 luge accident at the Vancouver Olympics. It shows that this runner-fillet interaction, and specifically the fillet's positive curvature up the inside wall, can cause a vertical velocity more than sufficient to clear the outside exit wall. In addition its negative curvature along the track, together with large vertical velocity, explains loss of fillet or wall contact and slider ejection. This exposes the fillet along inside walls as a track design flaw. A more transparent design ...

  7. Clean tracks for ATLAS

    CERN Multimedia


    First cosmic ray tracks in the integrated ATLAS barrel SCT and TRT tracking detectors. A snap-shot of a cosmic ray event seen in the different layers of both the SCT and TRT detectors. The ATLAS Inner Detector Integration Team celebrated a major success recently, when clean tracks of cosmic rays were detected in the completed semiconductor tracker (SCT) and transition radiation tracker (TRT) barrels. These tracking tests come just months after the successful insertion of the SCT into the TRT (See Bulletin 09/2006). The cosmic ray test is important for the experiment because, after 15 years of hard work, it is the last test performed on the fully assembled barrel before lowering it into the ATLAS cavern. The two trackers work together to provide millions of channels so that particles' tracks can be identified and measured with great accuracy. According to the team, the preliminary results were very encouraging. After first checks of noise levels in the final detectors, a critical goal was to study their re...

  8. Industrial radioactive wastes: what are we talking about?; Les dechets radioactifs industriels: de quoi s'agit-il?

    Energy Technology Data Exchange (ETDEWEB)

    Le Bars, Y. [Agence Nationale pour la Gestion des Dechets Radioactifs ANDRA, 92 - Chatenay Malabry (France)


    The subject of radioactive wastes is developed through their origin, their classification, their scale of size. The different storage centers are given and the new channels of radioactive wastes management are tackled. The particular case of high level and long term radioactive wastes is detailed. (N.C.)

  9. Hanford Site annual dangerous waste report: Volume 1, Part 1, Generator dangerous waste report, dangerous waste

    Energy Technology Data Exchange (ETDEWEB)



    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, weight, and waste designation.

  10. Lowering standards of clinical waste management: do the hazardous waste regulations conflict with the CDC's universal/standard precautions? (United States)

    Blenkharn, J I


    Clinical waste is a costly and troublesome commodity. Comprising the detritus of medical care, the foremost hazard is the risk of infection from micro-organisms present in these wastes. Infection commonly occurs through penetrating injury, the so-called 'sharps' or 'needlestick' injury, although contamination of non-intact skin or splashes to the eye may transmit infection. Bloodborne viruses (hepatitis B, hepatitis C, human immunodeficiency virus) are the most serious threat, although respiratory, soft tissue and enteric infections are not unknown. The European Hazardous Waste Directive, that harmonizes the categorization and control of wastes, permits downregulation of clinical wastes where the risk of infection may be low. Although strengthened by the requirement for risk assessment in waste classification, UK regulatory guidance promoting classification of some clinical wastes as non-hazardous completely ignores the Centers for Disease Control and Prevention's Universal Precautions for the prevention of transmission of human immunodeficiency virus, hepatitis B virus and other bloodborne pathogens in healthcare settings, which seek to prevent bloodborne virus infection in healthcare workers and others, and the more extensive Standard Precautions that extend these principles to the prevention of healthcare-associated infections and the environmental spread of nosocomial pathogens. By creating a potent cost driver encouraging downregulation of some clinical wastes, UK legislation based on the European Hazardous Waste Directive conflicts with the CDC's Universal/Standard Precautions.

  11. Library Classification 2020 (United States)

    Harris, Christopher


    In this article the author explores how a new library classification system might be designed using some aspects of the Dewey Decimal Classification (DDC) and ideas from other systems to create something that works for school libraries in the year 2020. By examining what works well with the Dewey Decimal System, what features should be carried…

  12. Linear Classification Functions. (United States)

    Huberty, Carl J.; Smith, Jerry D.

    Linear classification functions (LCFs) arise in a predictive discriminant analysis for the purpose of classifying experimental units into criterion groups. The relative contribution of the response variables to classification accuracy may be based on LCF-variable correlations for each group. It is proved that, if the raw response measures are…

  13. Stability of disposal rooms during waste retrieval

    Energy Technology Data Exchange (ETDEWEB)

    Brandshaug, T.


    This report presents the results of a numerical analysis to determine the stability of waste disposal rooms for vertical and horizontal emplacement during the period of waste retrieval. It is assumed that waste retrieval starts 50 years after the initial emplacement of the waste, and that access to and retrieval of the waste containers take place through the disposal rooms. It is further assumed that the disposal rooms are not back-filled. Convective cooling of the disposal rooms in preparation for waste retrieval is included in the analysis. Conditions and parameters used were taken from the Nevada Nuclear Waste Storage Investigation (NNWSI) Project Site Characterization Plan Conceptual Design Report (MacDougall et al., 1987). Thermal results are presented which illustrate the heat transfer response of the rock adjacent to the disposal rooms. Mechanical results are presented which illustrate the predicted distribution of stress, joint slip, and room deformations for the period of time investigated. Under the assumption that the host rock can be classified as ``fair to good`` using the Geomechanics Classification System (Bieniawski, 1974), only light ground support would appear to be necessary for the disposal rooms to remain stable. 23 refs., 28 figs., 2 tabs.

  14. Managing Waste Throughout Lean-Green Perspective

    Directory of Open Access Journals (Sweden)

    Lamyaa Mohammed Dawood


    Full Text Available Managing waste has been known as a crucial need as it may reduce resource consumption, rigid regulations regarded to the environment and occupational health and safety. Lean and green management are two approaches of management that validate waste. Since performance measures are crucial to improve waste management as its  goals of  to promote the performance of organizations .In this research four primary KPIs have been employed that are significant to lean-green management; operational, environmental, economic and social performance factors, subdivided further into sixteen as (Value stream mapping, life cycle assessment,---etc. Also in this research   determination and ranking of these performance measures and their influence on waste minimization is conducted. Interpretive Structural Modeling (ISM methodology is applied to the classification of Key Performance Indicators (KPIs according to the priority of their importance and the correlation between them and their impact to waste minimization. Cronbach’s Alpha coefficient is employed  to assess the reliability of performance measures to minimize waste, and increase customer  satisfaction.  Results showed that Al-Kufa Cement plant has bad overall performance toward lean green waste management perspective. The highest individual score is for operational performance (6.6 rated as medium. But  the lowest individual score is for economic performance [very bad (2.0].   

  15. Challenges in prosthesis classification. (United States)

    Robertsson, Otto; Mendenhall, Stan; Paxton, Elizabeth W; Inacio, Maria C S; Graves, Stephen


    Accurate prosthesis classification is critical for total joint arthroplasty surveillance and assessment of comparative effectiveness. Historically, prosthesis classification was based solely on the names of the prosthesis manufacturers. As a result, prosthesis designs changed without corresponding name changes, and other prostheses' names changed over time without substantial design modifications. As the number of prostheses used in total joint arthroplasty on the market increased, catalog and lot numbers associated with prosthesis descriptions were introduced by manufacturers. Currently, these catalog and lot numbers are not standardized, and there is no consensus on categorization of these numbers into brands or subbrands. Classification of the attributes of a prosthesis also varies, limiting comparisons of prostheses across studies and reports. The development of a universal prosthesis classification system would standardize prosthesis classification and enhance total joint arthroplasty research collaboration worldwide. This is a current area of focus for the International Consortium of Orthopaedic Registries (ICOR).

  16. Negotiating Family Tracking

    DEFF Research Database (Denmark)

    Albrechtslund, Anders; Bøge, Ask Risom; Sonne Damkjær, Maja

    This presentation explores the question: What motivates the use of tracking technologies in families, and how does the use transform the relations between parent and child? The purpose is to investigate why tracking technologies are used in families and how these technologies potentially change...... the relation between parents and children. The use of tracking technologies in families implicate negotiations about the boundaries of trust and intimacy in parent-child relations which can lead to strategies of resistance or modification (Fotel and Thomsen, 2004; Rooney, 2010; Steeves and Jones, 2010......). In the presentation, we report from a qualitative study that focuses on intergenerational relations. The study draws on empirical data from workshops with Danish families as well as individual and group interviews. We aim to gain insights about the sharing habits and negotiations in intimate family relations...

  17. Characteristics of track cycling. (United States)

    Craig, N P; Norton, K I


    Track cycling events range from a 200 m flying sprint (lasting 10 to 11 seconds) to the 50 km points race (lasting approximately 1 hour). Unlike road cycling competitions where most racing is undertaken at submaximal power outputs, the shorter track events require the cyclist to tax maximally both the aerobic and anaerobic (oxygen independent) metabolic pathways. Elite track cyclists possess key physical and physiological attributes which are matched to the specific requirements of their events: these cyclists must have the appropriate genetic predisposition which is then maximised through effective training interventions. With advances in technology it is now possible to accurately measure both power supply and demand variables under competitive conditions. This information provides better resolution of factors that are important for training programme design and skill development.


    DEFF Research Database (Denmark)


    This invention relates to a method of performing eye gaze tracking of at least one eye of a user, by determining the position of the center of the eye, said method comprising the steps of: detecting the position of at least three reflections on said eye, transforming said positions to spanning...... a normalized coordinate system spanning a frame of reference, wherein said transformation is performed based on a bilinear transformation or a non linear transformation e.g. a möbius transformation or a homographic transformation, detecting the position of said center of the eye relative to the position...... of said reflections and transforming this position to said normalized coordinate system, tracking the eye gaze by tracking the movement of said eye in said normalized coordinate system. Thereby calibration of a camera, such as knowledge of the exact position and zoom level of the camera, is avoided...

  19. Feature Extraction in Radar Target Classification

    Directory of Open Access Journals (Sweden)

    Z. Kus


    Full Text Available This paper presents experimental results of extracting features in the Radar Target Classification process using the J frequency band pulse radar. The feature extraction is based on frequency analysis methods, the discrete-time Fourier Transform (DFT and Multiple Signal Characterisation (MUSIC, based on the detection of Doppler effect. The analysis has turned to the preference of DFT with implemented Hanning windowing function. We assumed to classify targets-vehicles into two classes, the wheeled vehicle and tracked vehicle. The results show that it is possible to classify them only while moving. The feature of the class results from a movement of moving parts of the vehicle. However, we have not found any feature to classify the wheeled and tracked vehicles while non-moving, although their engines are on.

  20. Waste remediation

    Energy Technology Data Exchange (ETDEWEB)

    Halas, Nancy J.; Nordlander, Peter; Neumann, Oara


    A system including a steam generation system and a chamber. The steam generation system includes a complex and the steam generation system is configured to receive water, concentrate electromagnetic (EM) radiation received from an EM radiation source, apply the EM radiation to the complex, where the complex absorbs the EM radiation to generate heat, and transform, using the heat generated by the complex, the water to steam. The chamber is configured to receive the steam and an object, wherein the object is of medical waste, medical equipment, fabric, and fecal matter.

  1. Spirit Leaves Telling Tracks (United States)


    Scientists have found clues about the nature of martian soil through analyzing wheel marks from the Mars Exploration Rover Spirit in this image. The image was taken by Spirit's rear hazard-identification camera just after the rover drove approximately 1 meter (3 feet) northwest off the Columbia Memorial Station (lander platform) early Thursday morning. That the wheel tracks are shallow indicates the soil has plenty of strength to support the moving rover. The well-defined track characteristics suggest the presence of very fine particles in the martian soil (along with larger particles). Scientists also think the soil may have some cohesive properties.

  2. Muon Track Matching

    CERN Document Server

    Benvenuti, Alberto C; Genchev, V; Khanov, A I; Stepanov, N; Vankov, P


    For most physical processes the tracks observed in the muon stations must be matched with the corresponding tracks in the inner tracker, the external muon system providing muon identification and triggering but the tracker points giving the precise momentum measurement at lower momenta. For high momenta the momentum resolution is much improved by the interconnection of inner and outer measurements. The matching of outer and inner measurements is more delicate in case of muons embedded in jets. A study of the matching procedure was carried out using samples of (b, anti b) jets at high Pt, requiring (b, anti b) -> mu decays.

  3. Tracking Your Development

    CERN Document Server

    Hennum, Kelly M


    This book provides you with the means to set development goals and to track your progress on achieving them. It can help you efficiently gather and make sense of information about your progress and avoid common pitfalls that can block your development. Tracking your development can be captures in a few steps: articulating your goal, creating an action plan, gathering information about your behavior, indentifying barriers and support, and revising your action plan. Taking these steps will greatly increase the likelihood of achieving your goals.

  4. Hazardous Waste Generators (United States)

    Vermont Center for Geographic Information — The HazWaste database contains generator (companies and/or individuals) site and mailing address information, waste generation, the amount of waste generated etc. of...

  5. The temporality of waste

    DEFF Research Database (Denmark)

    Madsen, Katrine Dahl; Jordt Jørgensen, Nanna; Læssøe, Jeppe

    Waste is, indisputably, one of the key issues of environmental concerns of our times. In an environment and sustainability education perspective, waste offers concrete entry points to issues of consumption, sustainability and citizenship. Still, waste education has received relatively little...

  6. Household hazardous waste

    DEFF Research Database (Denmark)

    Fjelsted, Lotte; Christensen, Thomas Højlund


    .) comprised 15-25% and foreign items comprised 10-20%. Water-based paint was the dominant part of the paint waste. The chemical composition of the paint waste and the paint-like waste was characterized by an analysis of 27 substances in seven waste fractions. The content of critical substances was tow......'Paint waste', a part of the 'household hazardous waste', amounting to approximately 5 tonnes was collected from recycling stations in two Danish cities. Sorting and analyses of the waste showed paint waste comprised approximately 65% of the mass, paint-like waste (cleaners, fillers, etc...... and the paint waste was less contaminated with heavy metals than was the ordinary household waste. This may suggest that households no longer need to source-segregate their paint if the household waste is incinerated, since the presence of a small quantity of solvent-based paint will not be harmful when...

  7. Informative document waste plastics

    NARCIS (Netherlands)

    Nagelhout D; Sein AA; Duvoort GL


    This "Informative document waste plastics" forms part of a series of "informative documents waste materials". These documents are conducted by RIVM on the indstruction of the Directorate General for the Environment, Waste Materials Directorate, in behalf of the program of

  8. Informative document packaging waste

    NARCIS (Netherlands)

    Joosten JM; Nagelhout D; Duvoort GL; Weerd M de


    This "informative document packaging waste" forms part of a series of "informative documents waste materials". These documents are conducted by RIVM on the instructions of the Direcotrate General for the Environment, Waste Materials Directorate, in behalf of the program of

  9. Analytical methods for waste minimisation in the convenience food industry. (United States)

    Darlington, R; Staikos, T; Rahimifard, S


    Waste creation in some sectors of the food industry is substantial, and while much of the used material is non-hazardous and biodegradable, it is often poorly dealt with and simply sent to landfill mixed with other types of waste. In this context, overproduction wastes were found in a number of cases to account for 20-40% of the material wastes generated by convenience food manufacturers (such as ready-meals and sandwiches), often simply just to meet the challenging demands placed on the manufacturer due to the short order reaction time provided by the supermarkets. Identifying specific classes of waste helps to minimise their creation, through consideration of what the materials constitute and why they were generated. This paper aims to provide means by which food industry wastes can be identified, and demonstrate these mechanisms through a practical example. The research reported in this paper investigated the various categories of waste and generated three analytical methods for the support of waste minimisation activities by food manufacturers. The waste classifications and analyses are intended to complement existing waste minimisation approaches and are described through consideration of a case study convenience food manufacturer that realised significant financial savings through waste measurement, analysis and reduction.

  10. Kappa Coefficients for Circular Classifications

    NARCIS (Netherlands)

    Warrens, Matthijs J.; Pratiwi, Bunga C.


    Circular classifications are classification scales with categories that exhibit a certain periodicity. Since linear scales have endpoints, the standard weighted kappas used for linear scales are not appropriate for analyzing agreement between two circular classifications. A family of kappa

  11. Municipal Solid Waste Management


    Soni, Ajaykumar; Patil, Deepak; Argade, Kuldeep


    Waste management covers newly generated waste or waste from an onging process. When steps to reduce or even eliminate waste are to be considered, it is imperative that considerations should include total oversight, technical and management services of the total process.From raw material to the final product this includes technical project management expertise, technical project review and pollution prevention technical support and advocacy.Waste management also includes handling of waste, in...

  12. Supermarket food waste


    Eriksson, Mattias


    Food waste occurs along the entire food supply chain and gives rise to great financial losses and waste of natural resources. The retail stage of the supply chain contributes significant masses of waste. Causes of this waste need to be identified before potential waste reduction measures can be designed, tested and evaluated. Therefore this thesis quantified retail food waste and evaluated selected prevention and valorisation measures, in order to determine how the carbon footprint of food ca...

  13. Waste Transfer Stations

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund


    tion and transport is usually the most costly part of any waste management system; and when waste is transported over a considerable distance or for a long time, transferring the waste from the collection vehicles to more efficient transportation may be economically beneficial. This involves...... a transfer station where the transfer takes place. These stations may also be accessible by private people, offering flexibility to the waste system, including facilities for bulky waste, household hazardous waste and recyclables. Waste transfer may also take place on the collection route from small...... describes the main features of waste transfer stations, including some considerations about the economical aspects on when transfer is advisable....

  14. Attitude and position tracking

    CSIR Research Space (South Africa)

    Candy, LP


    Full Text Available velocity data separately in a suitable frame. In this chapter we make the case for using bivectors as the attitude tracking method of choice since several features make their performance and flexibility superior to that of DCMs, Euler angles or even rotors...

  15. Eye tracking social preferences

    NARCIS (Netherlands)

    Jiang, Ting; Potters, Jan; Funaki, Yukihiko

    We hypothesize that if people are motivated by a particular social preference, then choosing in accordance with this preference will lead to an identifiable pattern of eye movements. We track eye movements while subjects make choices in simple three-person distribution experiments. We characterize

  16. Energy Tracking Diagrams (United States)

    Scherr, Rachel E.; Harrer, Benedikt W.; Close, Hunter G.; Daane, Abigail R.; DeWater, Lezlie S.; Robertson, Amy D.; Seeley, Lane; Vokos, Stamatis


    Energy is a crosscutting concept in science and features prominently in national science education documents. In the "Next Generation Science Standards," the primary conceptual learning goal is for learners to conserve energy as they "track" the transfers and transformations of energy within, into, or out of the system of…

  17. Tracking Politics with POWER (United States)

    Moreira, Silvio; Batista, David S.; Carvalho, Paula; Couto, Francisco M.; Silva, Mario J.


    Purpose: POWER is an ontology of political processes and entities. It is designed for tracking politicians, political organizations and elections, both in mainstream and social media. The aim of this paper is to propose a data model to describe political agents and their relations over time. Design/methodology/approach: The authors propose a data…

  18. Tracking, say, SKYPE Locations

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Tracking, say, SKYPE Locations. Real Time Communication: Peer-to-Peer (P2P). Datagram flows between the two conversing partners; Exposes the IP addresses of all the participants to one another. If A knows B's VoIP ID, she can establish a call with Bob & obtain his current ...

  19. Tracking Speech Sound Acquisition (United States)

    Powell, Thomas W.


    This article describes a procedure to aid in the clinical appraisal of child speech. The approach, based on the work by Dinnsen, Chin, Elbert, and Powell (1990; Some constraints on functionally disordered phonologies: Phonetic inventories and phonotactics. "Journal of Speech and Hearing Research", 33, 28-37), uses a railway idiom to track gains in…

  20. Tracking in Uncertain Environments (United States)


    Fig 6.6 where the percentage of tracks maintained by each filter is plotted against p 95% confidence limites, derived from a binomial distribution...or PT high), the incorporation of the extra data reduces the average computacion time for the CAF: the extra information enables the filter to reduce

  1. Advanced Tracking of Vehicles

    DEFF Research Database (Denmark)

    Jensen, Christian Søndergaard; Li, K.-J.; Pakalnis, Stardas


    With the continued advances in wireless communications, geo-location technologies, and consumer electronics, it is becoming possible to accurately track the time-varying location of each vehicle in a population of vehicles. This paper reports on ongoing research that has as it objective to develo...

  2. Second sound tracking system (United States)

    Yang, Jihee; Ihas, Gary G.; Ekdahl, Dan


    It is common that a physical system resonates at a particular frequency, whose frequency depends on physical parameters which may change in time. Often, one would like to automatically track this signal as the frequency changes, measuring, for example, its amplitude. In scientific research, one would also like to utilize the standard methods, such as lock-in amplifiers, to improve the signal to noise ratio. We present a complete He ii second sound system that uses positive feedback to generate a sinusoidal signal of constant amplitude via automatic gain control. This signal is used to produce temperature/entropy waves (second sound) in superfluid helium-4 (He ii). A lock-in amplifier limits the oscillation to a desirable frequency and demodulates the received sound signal. Using this tracking system, a second sound signal probed turbulent decay in He ii. We present results showing that the tracking system is more reliable than those of a conventional fixed frequency method; there is less correlation with temperature (frequency) fluctuation when the tracking system is used.

  3. Chemical Waste and Allied Products. (United States)

    Hung, Yung-Tse; Aziz, Hamidi Abdul; Ramli, Siti Fatihah; Yeh, Ruth Yu-Li; Liu, Lian-Huey; Huhnke, Christopher Robert


    This review of literature published in 2015 focuses on waste related to chemical and allied products. The topics cover the waste management, physicochemical treatment, aerobic granular, aerobic waste treatment, anaerobic granular, anaerobic waste treatment, chemical waste, chemical wastewater, fertilizer waste, fertilizer wastewater, pesticide wastewater, pharmaceutical wastewater, ozonation. cosmetics waste, groundwater remediation, nutrient removal, nitrification denitrification, membrane biological reactor, and pesticide waste.

  4. GPS Metric Tracking Unit (United States)


    As Global Positioning Satellite (GPS) applications become more prevalent for land- and air-based vehicles, GPS applications for space vehicles will also increase. The Applied Technology Directorate of Kennedy Space Center (KSC) has developed a lightweight, low-cost GPS Metric Tracking Unit (GMTU), the first of two steps in developing a lightweight, low-cost Space-Based Tracking and Command Subsystem (STACS) designed to meet Range Safety's link margin and latency requirements for vehicle command and telemetry data. The goals of STACS are to improve Range Safety operations and expand tracking capabilities for space vehicles. STACS will track the vehicle, receive commands, and send telemetry data through the space-based asset, which will dramatically reduce dependence on ground-based assets. The other step was the Low-Cost Tracking and Data Relay Satellite System (TDRSS) Transceiver (LCT2), developed by the Wallops Flight Facility (WFF), which allows the vehicle to communicate with a geosynchronous relay satellite. Although the GMTU and LCT2 were independently implemented and tested, the design collaboration of KSC and WFF engineers allowed GMTU and LCT2 to be integrated into one enclosure, leading to the final STACS. In operation, GMTU needs only a radio frequency (RF) input from a GPS antenna and outputs position and velocity data to the vehicle through a serial or pulse code modulation (PCM) interface. GMTU includes one commercial GPS receiver board and a custom board, the Command and Telemetry Processor (CTP) developed by KSC. The CTP design is based on a field-programmable gate array (FPGA) with embedded processors to support GPS functions.

  5. Tracking Virtual Trajectories (United States)

    Stone, Leland S.; Beutter, Brent R.; Lorenceau, Jean D.; Null, Cynthia H. (Technical Monitor)


    Current models of smooth pursuit eye movements assume that it is largely driven by retinal image motion. We tested this hypothesis by measuring pursuit of elliptical motion (3.2s, 0.9 Hz, 1.4 deg x 1.6 deg, 4 randomly interleaved phases) of either a small spot ("real" motion) or of a line-figure diamond viewed through apertures such that only the motion of four isolated oblique line segments was visible ("virtual" motion). Each segment moved sinusoidally along a linear trajectory yet subjects perceived a diamond moving along an elliptical path behind the aperture. We found, as expected, that real motion produced accurate tracking (N = 2) with mean gain (over horizontal and vertical) of 0.9, mean phase of -6 deg (lag), mean relative phase (H vs V) of 90 +/- 8 deg (RMS error). Virtual motion behind an X-shaped aperture (N= 4 with one naive) yielded a mean gain of 0.7, mean phase of -11 deg, mean relative phase of 87 +/- 15 deg. We also measured pursuit with the X-shaped aperture using a higher segment luminance which prevents the segments from being grouped into a coherently moving diamond while keeping the motion otherwise identical. In this incoherent case, the same four subjects no longer showed consistent elliptical tracking (RMS error in relative phase rose to 60 deg) suggesting that perceptual coherence is critical. Furthermore, to rule out tracking of the centroid, we also used vertical apertures so that all segment motion was vertical (N = 3). This stimulus still produced elliptical tracking (mean relative phase of 84 +/- 19 deg), albeit with a lower gain (0.6). These data show that humans can track moving objects reasonably accurately even when the trajectory can only be derived by spatial integration of motion signals. Models that merely seek to minimize retinal or local stimulus motion cannot explain these results.

  6. Evaluation of mercury in the liquid waste processing facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Vijay [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Shah, Hasmukh [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Occhipinti, John E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Wilmarth, William R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, Richard E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    This report provides a summary of Phase I activities conducted to support an Integrated Evaluation of Mercury in Liquid Waste System (LWS) Processing Facilities. Phase I activities included a review and assessment of the liquid waste inventory and chemical processing behavior of mercury using a system by system review methodology approach. Gaps in understanding mercury behavior as well as action items from the structured reviews are being tracked. 64% of the gaps and actions have been resolved.

  7. Radiation waste management in Poland; Unieszkodliwianie odpadow promieniotworczych w Polsce

    Energy Technology Data Exchange (ETDEWEB)

    Tomczak, W. [Institute of Atomic Energy, Otwock-Swierk (Poland)


    Radioactive waste management especially related to storage of spent fuel from Ewa and Maria research nuclear reactors has been presented. The classification and balance of radioactive wastes coming from different branches of nuclear activities have been shown. The methods of their treatment in respect of physical state and radioactive have been performed as well as their storage in Central Polish Repository have been introduced. 2 figs, 4 tabs.

  8. Introduction to Waste Management

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund


    Solid waste management is as old as human civilization, although only considered an engineering discipline for about one century. The change from the previous focus on public cleansing of the cities to modern waste management was primarily driven by industrialization, which introduced new materials...... and chemicals, dramatically changing the types and composition of waste, and by urbanization making waste management in urban areas a complicated and costly logistic operation. This book focuses on waste that commonly appears in the municipal waste management system. This chapter gives an introduction to modern...... waste management, including issues as waste definition, problems associated with waste, waste management criteria and approaches to waste management. Later chapters introduce aspects of engineering (Chapter 1.2), economics (Chapter 1.3) and regulation (Chapter 1.4)....

  9. Mixed Waste Encapsulation in Polyester Resins. Treatment for Mixed Wastes Containing Salts. Mixed Waste Focus Area. OST Reference #1685

    Energy Technology Data Exchange (ETDEWEB)

    None, None


    Throughout the Department of Energy (DOE) complex there are large inventories of homogeneous solid mixed wastes, such as treatment residues, fly ashes, and sludges that contain relatively high concentrations (greater than 15% by weight) of salts. The inherent solubility of nitrate, sulfate, and chloride salts makes traditional cement stabilization of these waste streams difficult, expensive, and challenging. Salts can effect the setting rate of cements and can react with cement hydration products to form expansive and cement damaging compounds. Many of these salt wastes are in a dry granular form and are the by-product of treating spent acidic and metal solutions used to recover and reformulate nuclear weapons materials over the past 50 years. At the Idaho National Engineering and Environmental Laboratory (INEEL) alone, there is approximately 8,000 cubic meters of nitrate salts (potassium and sodium nitrate) stored above ground with an earthen cover. Current estimates indicate that over 200 million kg of contaminated salt wastes exist at various DOE sites. Continued primary treatment of waste water coupled with the use of mixed waste incinerators may generate an additional 5 million kg of salt-containing, mixed waste residues each year. One of the obvious treatment solutions for these salt-containing wastes is to immobilize the hazardous components to meet Environmental Protection Agency/Resource Conservation and Recovery Act (EPA/RCRA) Land Disposal Restrictions (LDR), thus rendering the mixed waste to a radioactive waste only classification. One proposed solution is to use thermal treatment via vitrification to immobilize the hazardous component and thereby substantially reduce the volume, as well as provide exceptional durability. However, these melter systems involve expensive capital apparatus with complicated off-gas systems. In addition, the vitrification of high salt waste may cause foaming and usually requires extensive development to specify glass

  10. [Classification of cardiomyopathy]. (United States)

    Asakura, Masanori; Kitakaze, Masafumi


    Cardiomyopathy is a group of cardiovascular diseases with poor prognosis. Some patients with dilated cardiomyopathy need heart transplantations due to severe heart failure. Some patients with hypertrophic cardiomyopathy die unexpectedly due to malignant ventricular arrhythmias. Various phenotypes of cardiomyopathies are due to the heterogeneous group of diseases. The classification of cardiomyopathies is important and indispensable in the clinical situation. However, their classification has not been established, because the causes of cardiomyopathies have not been fully elucidated. We usually use definition and classification offered by WHO/ISFC task force in 1995. Recently, several new definitions and classifications of the cardiomyopathies have been published by American Heart Association, European Society of Cardiology and Japanese Circulation Society.

  11. Update on diabetes classification. (United States)

    Thomas, Celeste C; Philipson, Louis H


    This article highlights the difficulties in creating a definitive classification of diabetes mellitus in the absence of a complete understanding of the pathogenesis of the major forms. This brief review shows the evolving nature of the classification of diabetes mellitus. No classification scheme is ideal, and all have some overlap and inconsistencies. The only diabetes in which it is possible to accurately diagnose by DNA sequencing, monogenic diabetes, remains undiagnosed in more than 90% of the individuals who have diabetes caused by one of the known gene mutations. The point of classification, or taxonomy, of disease, should be to give insight into both pathogenesis and treatment. It remains a source of frustration that all schemes of diabetes mellitus continue to fall short of this goal. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Classification in Medical Imaging

    DEFF Research Database (Denmark)

    Chen, Chen

    detection in a cardiovascular disease study. The third focus is to deepen the understanding of classification mechanism by visualizing the knowledge learned by a classifier. More specifically, to build the most typical patterns recognized by the Fisher's linear discriminant rule with applications......Classification is extensively used in the context of medical image analysis for the purpose of diagnosis or prognosis. In order to classify image content correctly, one needs to extract efficient features with discriminative properties and build classifiers based on these features. In addition......, a good metric is required to measure distance or similarity between feature points so that the classification becomes feasible. Furthermore, in order to build a successful classifier, one needs to deeply understand how classifiers work. This thesis focuses on these three aspects of classification...

  13. Pitch Based Sound Classification

    DEFF Research Database (Denmark)

    Nielsen, Andreas Brinch; Hansen, Lars Kai; Kjems, U


    -max output function. Both linear and quadratic inputs are used. The model is trained on 2 hours of sound and tested on publicly available data. A test classification error below 0.05 with 1 s classification windows is achieved. Further more it is shown that linear input performs as well as a quadratic......A sound classification model is presented that can classify signals into music, noise and speech. The model extracts the pitch of the signal using the harmonic product spectrum. Based on the pitch estimate and a pitch error measure, features are created and used in a probabilistic model with soft......, and that even though classification gets marginally better, not much is achieved by increasing the window size beyond 1 s....

  14. Learning Apache Mahout classification

    CERN Document Server

    Gupta, Ashish


    If you are a data scientist who has some experience with the Hadoop ecosystem and machine learning methods and want to try out classification on large datasets using Mahout, this book is ideal for you. Knowledge of Java is essential.

  15. Hand eczema classification

    DEFF Research Database (Denmark)

    Diepgen, T L; Andersen, Klaus Ejner; Brandao, F M


    Summary Background Hand eczema is a long-lasting disease with a high prevalence in the background population. The disease has severe, negative effects on quality of life and sometimes on social status. Epidemiological studies have identified risk factors for onset and prognosis, but treatment...... of the disease is rarely evidence based, and a classification system for different subdiagnoses of hand eczema is not agreed upon. Randomized controlled trials investigating the treatment of hand eczema are called for. For this, as well as for clinical purposes, a generally accepted classification system...... A classification system for hand eczema is proposed. Conclusions It is suggested that this classification be used in clinical work and in clinical trials....

  16. FDUMedSearch at TREC 2015 Clinical Decision Support Track (United States)


    expansion using Medical Subject Headings ( MeSH ), pseudo relevance feedback and classification were used to enhance the retrieval performance. We...Decision Support track 2015 (CDS2015) focuses on linking PubMed Central (PMC) articles to the medical cases for patient care. There are 30 topics...a doctor to help us to extract important keywords in the description of each topic in manual setting. 2.3 MeSH Terms Query Expansion MeSH has

  17. Expected Classification Accuracy

    Directory of Open Access Journals (Sweden)

    Lawrence M. Rudner


    Full Text Available Every time we make a classification based on a test score, we should expect some number..of misclassifications. Some examinees whose true ability is within a score range will have..observed scores outside of that range. A procedure for providing a classification table of..true and expected scores is developed for polytomously scored items under item response..theory and applied to state assessment data. A simplified procedure for estimating the..table entries is also presented.

  18. Latent classification models

    DEFF Research Database (Denmark)

    Langseth, Helge; Nielsen, Thomas Dyhre


    parametric family ofdistributions.  In this paper we propose a new set of models forclassification in continuous domains, termed latent classificationmodels. The latent classification model can roughly be seen ascombining the \\NB model with a mixture of factor analyzers,thereby relaxing the assumptions...... classification model, and wedemonstrate empirically that the accuracy of the proposed model issignificantly higher than the accuracy of other probabilisticclassifiers....

  19. Snake classification from images


    James, Alex.


    Incorrect snake identification from the observable visual traits is a major reason of death resulting from snake bites. So far no automatic classification method has been proposed to distinguish snakes by deciphering the taxonomy features of snake for the two major species of snakes i.e. Elapidae and Viperidae. We present a parallel processed inter-feature product similarity fusion based automatic classification of Spectacled Cobra, Russel's Viper, King Cobra, Common Krait, Saw Scaled Viper, ...

  20. An interface tracking model for droplet electrocoalescence.

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Lindsay Crowl


    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  1. Quality Assurance Training Tracking (QATTS) (United States)

    U.S. Environmental Protection Agency — This is metadata documentation for the Quality Assurance Training Tracking System (QATTS) which tracks Quality Assurace training given by R7 QA staff to in-house...

  2. Hanford Site annual dangerous waste report: Volume 3, Part 1, Waste Management Facility report, dangerous waste

    Energy Technology Data Exchange (ETDEWEB)



    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, handling method and containment vessel, waste number, waste designation, and amount of waste.

  3. Hanford Site annual dangerous waste report: Volume 3, Part 2, Waste Management Facility report, dangerous waste

    Energy Technology Data Exchange (ETDEWEB)



    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, handling and containment vessel, waste number, waste designation and amount of waste.

  4. A Classification of Feminist Theories

    Directory of Open Access Journals (Sweden)

    Karen Wendling


    Full Text Available In this paper I criticize Alison Jaggar’s descriptions of feminist political theories. I propose an alternative classification of feminist theories that I think more accurately reflects the multiplication of feminist theories and philosophies. There are two main categories, “street theory” and academic theories, each with two sub-divisions, political spectrum and “differences” under street theory, and directly and indirectly political analyses under academic theories. My view explains why there are no radical feminists outside of North America and why there are so few socialist feminists inside North America. I argue, controversially, that radical feminism is a radical version of liberalism. I argue that “difference” feminist theories – theory by and about feminists of colour, queer feminists, feminists with disabilities and so on – belong in a separate sub-category of street theory, because they’ve had profound effects on feminist activism not tracked by traditional left-to-right classifications. Finally, I argue that, while academic feminist theories such as feminist existentialism or feminist sociological theory are generally unconnected to movement activism, they provide important feminist insights that may become importantby showing the advantages of my classification over Jaggar’s views. Une analyse critique de la description des théories politiques féministes révèle qu’une classification alternative à celle de Jaggar permettrait de répertorier plus adéquatement les différents courants féministes qui ont évolués au cours des dernières décennies. La nouvelle cartographie que nous proposons comprend deux familles de féminisme : activiste et académique. Cette nouvelle manière de localiser et situer les féminismes aide à comprendre pourquoi il n’y a pas de féminisme radical à l’extérieur de l’Amérique du Nord et aussi pourquoi il y a si peu de féministes socialistes en Amérique du Nord

  5. Automated Proton Track Identification in MicroBooNE Using Gradient Boosted Decision Trees

    Energy Technology Data Exchange (ETDEWEB)

    Woodruff, Katherine [New Mexico State U.


    MicroBooNE is a liquid argon time projection chamber (LArTPC) neutrino experiment that is currently running in the Booster Neutrino Beam at Fermilab. LArTPC technology allows for high-resolution, three-dimensional representations of neutrino interactions. A wide variety of software tools for automated reconstruction and selection of particle tracks in LArTPCs are actively being developed. Short, isolated proton tracks, the signal for low- momentum-transfer neutral current (NC) elastic events, are easily hidden in a large cosmic background. Detecting these low-energy tracks will allow us to probe interesting regions of the proton's spin structure. An effective method for selecting NC elastic events is to combine a highly efficient track reconstruction algorithm to find all candidate tracks with highly accurate particle identification using a machine learning algorithm. We present our work on particle track classification using gradient tree boosting software (XGBoost) and the performance on simulated neutrino data.


    Directory of Open Access Journals (Sweden)

    TIMOFTE Claudia Simona


    Full Text Available The paper presents arguments and examples regarding the need to reuse, sort, manage and recycle more efficiently the textile wastes. Waste are increasing from a quantitative point of view and represent a major problem in each European country and the textile waste represent 5% of the total quantity of waste at a global level. It is estimated that about 95% of what it reaches the landfill could be reused so that the necessity of recycling is obvious. The constant need of transforming the wastes into by-products represents a priority because the textile waste have a special characteristic in the way that they can be reused or even repurposed. The paper also syhthesizes the legislation that makes reference to the textile waste, their classification and the obligations of the local community members, natural or legal persons. It is also presents the current situation of the textile waste with respect to Romania and Bihor county, but there are also presented other numerous cases, examples and situations in which the waste is recovered/collected properly. The examples have the role of showing and emphasizing the concerns of some companies, brands, institutions or local authorities, specialists and specialized personnel within the agencies of environmental protection to encourage recycling or reuse of the textile products that are inappropriately considered as wastes. The information for this paper was collected from literature, from the Agency of Environmental Protection Bihor and on the Internet.

  7. Track-based event recognition in a realistic crowded environment (United States)

    van Huis, Jasper R.; Bouma, Henri; Baan, Jan; Burghouts, Gertjan J.; Eendebak, Pieter T.; den Hollander, Richard J. M.; Dijk, Judith; van Rest, Jeroen H.


    Automatic detection of abnormal behavior in CCTV cameras is important to improve the security in crowded environments, such as shopping malls, airports and railway stations. This behavior can be characterized at different time scales, e.g., by small-scale subtle and obvious actions or by large-scale walking patterns and interactions between people. For example, pickpocketing can be recognized by the actual snatch (small scale), when he follows the victim, or when he interacts with an accomplice before and after the incident (longer time scale). This paper focusses on event recognition by detecting large-scale track-based patterns. Our event recognition method consists of several steps: pedestrian detection, object tracking, track-based feature computation and rule-based event classification. In the experiment, we focused on single track actions (walk, run, loiter, stop, turn) and track interactions (pass, meet, merge, split). The experiment includes a controlled setup, where 10 actors perform these actions. The method is also applied to all tracks that are generated in a crowded shopping mall in a selected time frame. The results show that most of the actions can be detected reliably (on average 90%) at a low false positive rate (1.1%), and that the interactions obtain lower detection rates (70% at 0.3% FP). This method may become one of the components that assists operators to find threatening behavior and enrich the selection of videos that are to be observed.

  8. A New Classification Approach Based on Multiple Classification Rules


    Zhongmei Zhou


    A good classifier can correctly predict new data for which the class label is unknown, so it is important to construct a high accuracy classifier. Hence, classification techniques are much useful in ubiquitous computing. Associative classification achieves higher classification accuracy than some traditional rule-based classification approaches. However, the approach also has two major deficiencies. First, it generates a very large number of association classification rules, especially when t...

  9. Fixed Scan Area Tracking with Track Splitting Filtering Algorithm

    DEFF Research Database (Denmark)

    Hussain, Dil Muhammad Akbar; Ahmed, Zaki


    The paper presents a simulation study by tracking multiple objects in a fixed window using a non deterministic scenario for the performance evaluation of track splitting algorithm on a digital signal processor.  Much of the previous work [1] was done on specific (deterministic) scenarios. One of ...... of such a tracking system by varying the density of the objects.  The track splitting algorithm using Kalman filters is implemented and a couple of tracking performance parameters are computed to investigate such randomly walking objects....

  10. Tracking change over time (United States)



    Landsat satellites capture images of Earth from space-and have since 1972! These images provide a long-term record of natural and human-induced changes on the global landscape. Comparing images from multiple years reveals slow and subtle changes as well as rapid and devastating ones. Landsat images are available over the Internet at no charge. Using the free software MultiSpec, students can track changes to the landscape over time-just like remote sensing scientists do! The objective of the Tracking Change Over Time lesson plan is to get students excited about studying the changing Earth. Intended for students in grades 5-8, the lesson plan is flexible and may be used as a student self-guided tutorial or as a teacher-led class lesson. Enhance students' learning of geography, map reading, earth science, and problem solving by seeing landscape changes from space.

  11. Structural Sparse Tracking

    KAUST Repository

    Zhang, Tianzhu


    Sparse representation has been applied to visual tracking by finding the best target candidate with minimal reconstruction error by use of target templates. However, most sparse representation based trackers only consider holistic or local representations and do not make full use of the intrinsic structure among and inside target candidates, thereby making the representation less effective when similar objects appear or under occlusion. In this paper, we propose a novel Structural Sparse Tracking (SST) algorithm, which not only exploits the intrinsic relationship among target candidates and their local patches to learn their sparse representations jointly, but also preserves the spatial layout structure among the local patches inside each target candidate. We show that our SST algorithm accommodates most existing sparse trackers with the respective merits. Both qualitative and quantitative evaluations on challenging benchmark image sequences demonstrate that the proposed SST algorithm performs favorably against several state-of-the-art methods.

  12. Tracking migrating birds

    DEFF Research Database (Denmark)

    Willemoes, Mikkel

    Migratory movements of birds has always fascinated man and led to many questions concerning the ecological drivers behind, the necessary adaptations and the navigational abilities required. However, especially for the long-distance migrants, basic descriptions of their movements are still lacking...... and many experiments are only becoming possible with the current development of tracking technologies. During this thesis work I have been tracking the poorly known movements of several species of long-distance migrants and document highly complex migration patterns. In three manuscripts these movements...... were related to the yearly progression of an environmental surrogate for food availability along the course of migration. In one species, with multiple, different non-breeding staging sites, environmental conditions explain movements well and also how yearly differences explain differences in timing...

  13. Sensor Alignment by Tracks

    CERN Document Server

    Karimäki, V; Lampen, T; Lindén, T


    Good geometrical calibration is essential in the use of high resolution detectors. The individual sensors in the detector have to be calibrated with an accuracy better than the intrinsic resolution, which typically is of the order of 10 um. We present an effective method to perform fine calibration of sensor positions in a detector assembly consisting of a large number of pixel and strip sensors. Up to six geometric parameters, three for location and three for orientation, can be computed for each sensor on a basis of particle trajectories traversing the detector system. The performance of the method is demonstrated with both simulated tracks and tracks reconstructed from experimental data. We also present a brief review of other alignment methods reported in the literature.

  14. Dinosaur Tracks and Traces (United States)

    Gillette, David D.; Lockley, Martin G.


    The study of fossilized dinosaur remains, vertebrate paleontology is a well established discipline, but the discovery and rediscovery of numerous and varied dinosaur footprints and nest sites has spurred a renaissance in the associated field of ichnological research. Dinosaur Tracks and Traces is the first book ever to be devoted to this subject, and it represents the work of seventy noted dinosaur ichnologists. Contributors address the history of science and the relevance of dinosaur ichnology to the interpretation of dinosaur behaviour, paleoecology, paleoenvironments, and evolution. Several new preservation, conservation, and documentation techniques are also presented. The book is richly illustrated and is intended for students and professionals in the areas of paleontology, vertebrate zoology, geology, and paleoenvironmental analysis. The historical aspects of the book and the many site descriptions also make Dinosaur Tracks and Traces appealing to amateur fossil collectors and dinosaur enthusiasts.

  15. The track nanotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Waheed, A. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Forsyth, D., E-mail: [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Watts, A. [Department of Physics, UCL, London Centre of Nanotechnology (LCN), 17-19 Gordon Street, London WC1H OAH (United Kingdom); Saad, A.F. [Physics Department, Faculty of Science, Garyounis University, Benghazi (Libyan Arab Jamahiriya); Mitchell, G.R. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Farmer, M. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Harris, P.J.F. [Physics Department, University of Reading, Reading RG6 6AF (United Kingdom)


    The discipline now called Solid State Nuclear Track Detection (SSNTD) dates back to 1958 and has its roots in the United Kingdom. Its strength stems chiefly from factors such as its simplicity, small geometry, permanent maintenance of the nuclear record and other diversified applications. A very important field with exciting applications reported recently in conjuction with the nuclear track technique is nanotechnology, which has applications in biology, chemistry, industry, medicare and health, information technology, biotechnology, and metallurgical and chemical technologies. Nanotechnology requires material design followed by the study of the quantum effects for final produced applications in sensors, medical diagnosis, information technology to name a few. We, in this article, present a review of past and present applications of SSNTD suggesting ways to apply the technique in nanotechnology, with special reference to development of nanostructure for applications utilising nanowires, nanofilters and sensors.

  16. Common occupational classification system - revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Stahlman, E.J.; Lewis, R.E.


    Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

  17. Thermal Tracking of Sports Players

    DEFF Research Database (Denmark)

    Gade, Rikke; Moeslund, Thomas B.


    We present here a real-time tracking algorithm for thermal video from a sports game. Robust detection of people includes routines for handling occlusions and noise before tracking each detected person with a Kalman filter. This online tracking algorithm is compared with a state-of-the-art offline...

  18. Waste Receiving and Processing, Module 2A, feed specification: Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, O.L.; Sheriff, M.L.


    Detailed descriptions of the various mixed low-level waste feed streams that will be processed in the Waste Receiving and Processing Facility, Module 2A (WRAP 2A) are provided. Feed stream descriptions are based on available reports, the solid waste information tracking system database, and the 1993 solid waste forecast data. Available chemical and physical attributes, radionuclide data, waste codes, and packaging information are shown for 15 feed streams. The information sources and methodology for obtaining projections for WRAP 2A expected feed stream volumes also are described.

  19. Function analysis for waste information systems

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, J.L.; Neal, C.T.; Heath, T.C.; Starling, C.D.


    This study has a two-fold purpose. It seeks to identify the functional requirements of a waste tracking information system and to find feasible alternatives for meeting those requirements on the Oak Ridge Reservation (ORR) and the Portsmouth (PORTS) and Paducah (PGDP) facilities; identify options that offer potential cost savings to the US government and also show opportunities for improved efficiency and effectiveness in managing waste information; and, finally, to recommend a practical course of action that can be immediately initiated. In addition to identifying relevant requirements, it also identifies any existing requirements that are currently not being completely met. Another aim of this study is to carry out preliminary benchmarking by contacting representative companies about their strategic directions in waste information. The information obtained from representatives of these organizations is contained in an appendix to the document; a full benchmarking effort, however, is beyond the intended scope of this study.

  20. Waste Package Lifting Calculation

    Energy Technology Data Exchange (ETDEWEB)

    H. Marr


    The objective of this calculation is to evaluate the structural response of the waste package during the horizontal and vertical lifting operations in order to support the waste package lifting feature design. The scope of this calculation includes the evaluation of the 21 PWR UCF (pressurized water reactor uncanistered fuel) waste package, naval waste package, 5 DHLW/DOE SNF (defense high-level waste/Department of Energy spent nuclear fuel)--short waste package, and 44 BWR (boiling water reactor) UCF waste package. Procedure AP-3.12Q, Revision 0, ICN 0, calculations, is used to develop and document this calculation.

  1. Commercial and Institutional Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde


    Commercial and institutional waste is primarily from retail (stores), hotels, restaurants, health care (except health risk waste), banks, insurance companies, education, retirement homes, public services and transport. Within some of these sectors, e.g. retail and restaurants, large variations...... is handled in the municipal waste system, where information is easily accessible. An important part of commercial and institutional waste is packaging waste, and enterprises with large quantities of clean paper, cardboard and plastic waste may have their own facilities for baling and storing their waste...

  2. Track based Alignment of the ATLAS Inner Detector Tracking System

    CERN Document Server

    Schieck, J; The ATLAS collaboration


    ATLAS is a multipurpose experiment that records the LHC collisions. In order to reconstruct trajectories of charged particle, ATLAS is equipped with a tracking system built using different technologies, silicon planar sensors (pixel and microstrips) and drift‐tube detectors. In order to achieve its scientific goals, the ATLAS tracking system requires to determine accurately its almost 700,000 degrees of freedom. The demanded precision for the alignment of the silicon sensors is below 10 micrometers. This implies to use a large sample of high momentum and isolated tracks. The high level trigger selects and stores those tracks in a calibration stream. Tracks from cosmic trigger during empty LHC bunches are also used as input for the alignment. The implementation of the track based alignment within the ATLAS software unifies different alignment approaches and allows the alignment of all tracking subsystems together. Primary vertexing and beam spot constraints have been implemented, as well as constraints on th...

  3. Fifteenth annual U.S. Department of Energy low-level radioactive waste management conference: Agenda and abstracts

    Energy Technology Data Exchange (ETDEWEB)



    The goal of the conference was to give the opportunity to identify and discuss low-level radioactive waste management issues, share lessons learned, and hear about some of the latest advances in technology. Abstracts of the presentations are arranged into the following topical sections: (1) Performance Management Track: Performance assessment perspectives; Site characterization; Modeling and performance assessment; and Remediation; (2) Technical Track: Strategic planning; Tools and options; Characterization and validation; Treatment updates; Technology development; and Storage; (3) Institutional Track: Orders and regulatory issues; Waste management options; Legal, economic, and social issues; Public involvement; Siting process; and Low-level radioactive waste policy amendment acts.

  4. Waste Management Plan for the Oak Ridge National Remedial Investigation/Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)


    In accordance with the requirements of the Remedial Investigation/Feasibility Study (RI/FS) Project Quality Assurance Plan, this Waste Management Plan establishes clear lines of responsibility and authority, documentation requirements, and operational guidance for the collection, identification, segregation, classification, packaging, certification, and storage/disposal of wastes. These subjects are discussed in the subsequent sections of this document.

  5. Fuzzy Logic Particle Tracking (United States)


    A new all-electronic Particle Image Velocimetry technique that can efficiently map high speed gas flows has been developed in-house at the NASA Lewis Research Center. Particle Image Velocimetry is an optical technique for measuring the instantaneous two component velocity field across a planar region of a seeded flow field. A pulsed laser light sheet is used to illuminate the seed particles entrained in the flow field at two instances in time. One or more charged coupled device (CCD) cameras can be used to record the instantaneous positions of particles. Using the time between light sheet pulses and determining either the individual particle displacements or the average displacement of particles over a small subregion of the recorded image enables the calculation of the fluid velocity. Fuzzy logic minimizes the required operator intervention in identifying particles and computing velocity. Using two cameras that have the same view of the illumination plane yields two single exposure image frames. Two competing techniques that yield unambiguous velocity vector direction information have been widely used for reducing the single-exposure, multiple image frame data: (1) cross-correlation and (2) particle tracking. Correlation techniques yield averaged velocity estimates over subregions of the flow, whereas particle tracking techniques give individual particle velocity estimates. For the correlation technique, the correlation peak corresponding to the average displacement of particles across the subregion must be identified. Noise on the images and particle dropout result in misidentification of the true correlation peak. The subsequent velocity vector maps contain spurious vectors where the displacement peaks have been improperly identified. Typically these spurious vectors are replaced by a weighted average of the neighboring vectors, thereby decreasing the independence of the measurements. In this work, fuzzy logic techniques are used to determine the true

  6. Nuclear waste solidification (United States)

    Bjorklund, William J.


    High level liquid waste solidification is achieved on a continuous basis by atomizing the liquid waste and introducing the atomized liquid waste into a reaction chamber including a fluidized, heated inert bed to effect calcination of the atomized waste and removal of the calcined waste by overflow removal and by attrition and elutriation from the reaction chamber, and feeding additional inert bed particles to the fluidized bed to maintain the inert bed composition.

  7. Municipal Solid Waste Resources

    Energy Technology Data Exchange (ETDEWEB)



    Municipal solid waste (MSW) is a source of biomass material that can be utilized for bioenergy production with minimal additional inputs. MSW resources include mixed commercial and residential garbage such as yard trimmings, paper and paperboard, plastics, rubber, leather, textiles, and food wastes. Waste resources such as landfill gas, mill residues, and waste grease are already being utilized for cost-effective renewable energy generation. MSW for bioenergy also represents an opportunity to divert greater volumes of residential and commercial waste from landfills.

  8. Quality of Slab Track Construction – Track Alignment Design and Track Geometry


    Šestáková Janka


    The slab track superstructure design (without ballast) is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

  9. Quality of Slab Track Construction – Track Alignment Design and Track Geometry

    Directory of Open Access Journals (Sweden)

    Šestáková Janka


    Full Text Available The slab track superstructure design (without ballast is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

  10. Thermal Tracking of Sports Players

    Directory of Open Access Journals (Sweden)

    Rikke Gade


    Full Text Available We present here a real-time tracking algorithm for thermal video from a sports game. Robust detection of people includes routines for handling occlusions and noise before tracking each detected person with a Kalman filter. This online tracking algorithm is compared with a state-of-the-art offline multi-target tracking algorithm. Experiments are performed on a manually annotated 2-minutes video sequence of a real soccer game. The Kalman filter shows a very promising result on this rather challenging sequence with a tracking accuracy above 70% and is superior compared with the offline tracking approach. Furthermore, the combined detection and tracking algorithm runs in real time at 33 fps, even with large image sizes of 1920 × 480 pixels.



    Shanina, T. P.; Seyfullina, I. I.; Kushnyreva, V. A.


    Analysis of the classifications of plastic waste from production and consumption is made by various criteria. Distinctive features of the specifi ed waste behavior under various treatment methods (deposition at landfill, incineration and recycling) are discussed. Clustering of the polymeric waste by hazard categories of the combustion products is performed. The polyvinyl-chlorides and polycarbonates which generate the most hazardous products under  the combustion are singled out in a particul...

  12. Spectral feature classification and spatial pattern recognition (United States)

    Sivertson, W. E., Jr.; Wilson, R. G.


    This paper introduces a spatial pattern recognition processing concept involving the use of spectral feature classification technology and coherent optical correlation. The concept defines a hybrid image processing system incorporating both digital and optical technology. The hybrid instrument provides simplified pseudopattern images as functions of pixel classification from information embedded within a real-scene image. These pseudoimages become simplified inputs to an optical correlator for use in a subsequent pattern identification decision useful in executing landmark pointing, tracking, or navigating functions. Real-time classification is proposed as a research tool for exploring ways to enhance input signal-to-noise ratio as an aid in improving optical correlation. The approach can be explored with developing technology, including a current NASA Langley Research Center technology plan that involves a series of related Shuttle-borne experiments. A first-planned experiment, Feature Identification and Location Experiment (FILE), is undergoing final ground testing, and is scheduled for flight on the NASA Shuttle (STS2/flight OSTA-1) in 1980. FILE will evaluate a technique for autonomously classifying earth features into the four categories: bare land; water; vegetation; and clouds, snow, or ice.

  13. Classification of hand eczema

    DEFF Research Database (Denmark)

    Agner, T; Aalto-Korte, K; Andersen, K E


    BACKGROUND: Classification of hand eczema (HE) is mandatory in epidemiological and clinical studies, and also important in clinical work. OBJECTIVES: The aim was to test a recently proposed classification system of HE in clinical practice in a prospective multicentre study. METHODS: Patients were...... HE, protein contact dermatitis/contact urticaria, hyperkeratotic endogenous eczema and vesicular endogenous eczema, respectively. An additional diagnosis was given if symptoms indicated that factors additional to the main diagnosis were of importance for the disease. RESULTS: Four hundred and twenty......%) could not be classified. 38% had one additional diagnosis and 26% had two or more additional diagnoses. Eczema on feet was found in 30% of the patients, statistically significantly more frequently associated with hyperkeratotic and vesicular endogenous eczema. CONCLUSION: We find that the classification...

  14. Cellular image classification

    CERN Document Server

    Xu, Xiang; Lin, Feng


    This book introduces new techniques for cellular image feature extraction, pattern recognition and classification. The authors use the antinuclear antibodies (ANAs) in patient serum as the subjects and the Indirect Immunofluorescence (IIF) technique as the imaging protocol to illustrate the applications of the described methods. Throughout the book, the authors provide evaluations for the proposed methods on two publicly available human epithelial (HEp-2) cell datasets: ICPR2012 dataset from the ICPR'12 HEp-2 cell classification contest and ICIP2013 training dataset from the ICIP'13 Competition on cells classification by fluorescent image analysis. First, the reading of imaging results is significantly influenced by one’s qualification and reading systems, causing high intra- and inter-laboratory variance. The authors present a low-order LP21 fiber mode for optical single cell manipulation and imaging staining patterns of HEp-2 cells. A focused four-lobed mode distribution is stable and effective in optical...

  15. Medical imbalanced data classification

    Directory of Open Access Journals (Sweden)

    Sara Belarouci


    Full Text Available In general, the imbalanced dataset is a problem often found in health applications. In medical data classification, we often face the imbalanced number of data samples where at least one of the classes constitutes only a very small minority of the data. In the same time, it represent a difficult problem in most of machine learning algorithms. There have been many works dealing with classification of imbalanced dataset. In this paper, we proposed a learning method based on a cost sensitive extension of Least Mean Square (LMS algorithm that penalizes errors of different samples with different weights and some rules of thumb to determine those weights. After the balancing phase, we apply the different techniques (Support Vector Machine [SVM], K- Nearest Neighbor [K-NN] and Multilayer perceptron [MLP] for the balanced datasets. We have also compared the obtained results before and after balancing method. We have obtained best results compared to literature with a classification accuracy of 100%.

  16. Test Track Facilities (United States)


    Gradients 48 16/19 3.17 Offset Towing Course 52 20 3.18 Straight and Level course 56 22 3.19 Suspension Courses 589a. Mrv 58 8 b. Boulder 59 8I c. Camera...Track 59 d. Setts 59 5/6t 3.20 Wading Pool 66 34 3.21 Field Dynamometer 68 39 3.22 Winch Test Facility 70 10 3.23 General Vehicle ( Dynamometer ) 73 4...PERCENT GRADE (1 IN 2) 18 TEST GRADIENT 33.3 PERCENT GRAD (1 IN 3) 19 TEST GRADIENT 25 PERCENT GRADE (I IN 4) 20 OFFSET TOWING SUSPENSION COURSE 21 OUTER

  17. DBIS on track

    Energy Technology Data Exchange (ETDEWEB)



    DB Information Systems has adapted its CommTrac bulk material tracking software for coal handling at Humber International Terminal (HIT2) which handles coal for power generators. CommTrac incorporates Preactor software to manage scheduling and an active planning board to monitor progress. The core of the system is the stockyard layout plan which sets the coordinates for the stacker/reclaimer to optimise stockyard utilization, while maintaining segregation of shipments and blending requirements. CommTrac is integrated with equipment PLCs and SCADA (supervisory control and data acquisition) control systems to give real time information on unloading rates and workflows to the planning software. 3 figs.

  18. Solar Tracking System


    Nguyen, Nam


    The goal of this thesis was to develop a laboratory prototype of a solar tracking system, which is able to enhance the performance of the photovoltaic modules in a solar energy system. The operating principle of the device is to keep the photovoltaic modules constantly aligned with the sunbeams, which maximises the exposure of solar panel to the Sun’s radiation. As a result, more output power can be produced by the solar panel. The work of the project included hardware design and implemen...

  19. Acoustic classification of dwellings

    DEFF Research Database (Denmark)

    Berardi, Umberto; Rasmussen, Birgit


    insulation performance, national schemes for sound classification of dwellings have been developed in several European countries. These schemes define acoustic classes according to different levels of sound insulation. Due to the lack of coordination among countries, a significant diversity in terms...... of descriptors, number of classes, and class intervals occurred between national schemes. However, a proposal “acoustic classification scheme for dwellings” has been developed recently in the European COST Action TU0901 with 32 member countries. This proposal has been accepted as an ISO work item. This paper...

  20. The paradox of atheoretical classification

    DEFF Research Database (Denmark)

    Hjørland, Birger


    A distinction can be made between “artificial classifications” and “natural classifications,” where artificial classifications may adequately serve some limited purposes, but natural classifications are overall most fruitful by allowing inference and thus many different purposes. There is strong...... support for the view that a natural classification should be based on a theory (and, of course, that the most fruitful theory provides the most fruitful classification). Nevertheless, atheoretical (or “descriptive”) classifications are often produced. Paradoxically, atheoretical classifications may...... be very successful. The best example of a successful “atheoretical” classification is probably the prestigious Diagnostic and Statistical Manual of Mental Disorders (DSM) since its third edition from 1980. Based on such successes one may ask: Should the claim that classifications ideally are natural...

  1. Information gathering for CLP classification

    Directory of Open Access Journals (Sweden)

    Ida Marcello


    Full Text Available Regulation 1272/2008 includes provisions for two types of classification: harmonised classification and self-classification. The harmonised classification of substances is decided at Community level and a list of harmonised classifications is included in the Annex VI of the classification, labelling and packaging Regulation (CLP. If a chemical substance is not included in the harmonised classification list it must be self-classified, based on available information, according to the requirements of Annex I of the CLP Regulation. CLP appoints that the harmonised classification will be performed for carcinogenic, mutagenic or toxic to reproduction substances (CMR substances and for respiratory sensitisers category 1 and for other hazard classes on a case-by-case basis. The first step of classification is the gathering of available and relevant information. This paper presents the procedure for gathering information and to obtain data. The data quality is also discussed.

  2. Waste catalysts for waste polymer. (United States)

    Salmiaton, A; Garforth, A


    Catalytic cracking of high-density polyethylene (HDPE) over fluid catalytic cracking (FCC) catalysts (1:6 ratio) was carried out using a laboratory fluidized bed reactor operating at 450 degrees C. Two fresh and two steam deactivated commercial FCC catalysts with different levels of rare earth oxide (REO) were compared as well as two used FCC catalysts (E-Cats) with different levels of metal poisoning. Also, inert microspheres (MS3) were used as a fluidizing agent to compare with thermal cracking process at BP pilot plant at Grangemouth, Scotland, which used sand as its fluidizing agent. The results of HDPE degradation in terms of yield of volatile hydrocarbon product are fresh FCC catalysts>steamed FCC catalysts approximately used FCC catalysts. The thermal cracking process using MS3 showed that at 450 degrees C, the product distribution gave 46 wt% wax, 14% hydrocarbon gases, 8% gasoline, 0.1% coke and 32% nonvolatile product. In general, the product yields from HDPE cracking showed that the level of metal contamination (nickel and vanadium) did not affect the product stream generated from polymer cracking. This study gives promising results as an alternative technique for the cracking and recycling of polymer waste.

  3. Terrain Classification Using Multi-Wavelength Lidar Data (United States)


    ground” at best. Applying the spectral classification technique pulls out areas that are covered in grass, asphalt, concrete , etc. Furthermore close... Pavement 1 School Parking Lot and Substation Access Road Red 3 Ground (2) Pavement 2 Side streets and Lake Footpath Light Green 4 Ground (2... Pavement 3 Main thoroughfares Blue 5 Ground (2) Railroad Tracks Yellow 6 Vegetation (5) Vegetation Light Blue 7 Building (6) Roof 1 Trapezoidal

  4. Management and control of radioactive wastes in Ghana | Gbadago ...

    African Journals Online (AJOL)

    ... is responsible for monitoring and tracking all radioactive materials imported, stored or exported. The profile of radioactive sources in active use are also presented, in addition to spent radioactive sources currently in the custody of the NRWMC as part of the inventory for creating databases on radioactive wastes in Ghana.

  5. Lean Rules Identification and Classification for Manufacturing Industry


    Mourtzis, D.; Papathanasiou, P; Fotia, S.


    Lean theory, principles and tools, are intended to highlight the value within the company and eliminate waste entirely. Despite the large amount of literature work on lean, there is a lack of in-depth analysis for collection and categorization of specific lean rules for the manufacturing industry. Therefore, the present work proposes a classification, formalization and identification of lean rules, in order to create a comprehensive and applicable library of lean rules, after the investigatio...

  6. Quantifying construction and demolition waste: An analytical review

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Zezhou [Department of Building and Real Estate, The Hong Kong Polytechnic University, Kowloon, Hong Kong (China); Yu, Ann T.W., E-mail: [Department of Building and Real Estate, The Hong Kong Polytechnic University, Kowloon, Hong Kong (China); Shen, Liyin; Liu, Guiwen [Faculty of Construction Management and Real Estate, Chongqing University, Chongqing 400045 (China)


    Highlights: • Prevailing C and D waste quantification methodologies are identified and compared. • One specific methodology cannot fulfill all waste quantification scenarios. • A relevance tree for appropriate quantification methodology selection is proposed. • More attentions should be paid to civil and infrastructural works. • Classified information is suggested for making an effective waste management plan. - Abstract: Quantifying construction and demolition (C and D) waste generation is regarded as a prerequisite for the implementation of successful waste management. In literature, various methods have been employed to quantify the C and D waste generation at both regional and project levels. However, an integrated review that systemically describes and analyses all the existing methods has yet to be conducted. To bridge this research gap, an analytical review is conducted. Fifty-seven papers are retrieved based on a set of rigorous procedures. The characteristics of the selected papers are classified according to the following criteria - waste generation activity, estimation level and quantification methodology. Six categories of existing C and D waste quantification methodologies are identified, including site visit method, waste generation rate method, lifetime analysis method, classification system accumulation method, variables modelling method and other particular methods. A critical comparison of the identified methods is given according to their characteristics and implementation constraints. Moreover, a decision tree is proposed for aiding the selection of the most appropriate quantification method in different scenarios. Based on the analytical review, limitations of previous studies and recommendations of potential future research directions are further suggested.

  7. Waste Encapsulation and Storage Facility (WESF) Hazards Assessment

    Energy Technology Data Exchange (ETDEWEB)

    COVEY, L.I.


    This report documents the hazards assessment for the Waste Encapsulation and Storage Facility (WESF) located on the U.S. Department of Energy (DOE) Hanford Site. This hazards assessment was conducted to provide the emergency planning technical basis for WESF. DOE Orders require an emergency planning hazards assessment for each facility that has the potential to reach or exceed the lowest level emergency classification.

  8. Dynamics of Wasting and Underweight in Ethiopian Children

    African Journals Online (AJOL)

    Optiplex 7010 Pro

    undernutrition may not be enough to improve children's nutrition. Further panel analysis, conditional on baseline nutrition status, shows that drivers of change are asymmetrical—a finding important for policy development. Keywords: Ethiopia, child malnutrition, wasting, underweight, panel data analysis. JEL Classification: ...

  9. Putting Off-Track Youths Back on Track to College (United States)

    Steinberg, Adria; Allen, Lili


    Back on Track, developed by Jobs for the Future, is a design for schools to not only re-engage off-track and out-of-school youths to graduate from high school, but also to put them on a clear, supported path to a college education. Two schools that have combined Back on Track with the early college model, in which students can earn both a high…

  10. Hazardous Waste: Learn the Basics of Hazardous Waste (United States)

    ... Agency Search Search Hazardous Waste Contact Us Share Learn the Basics of Hazardous Waste Hazardous waste that ... Regulations part 261 . Select a question below to learn more about each step in the hazardous waste ...

  11. Hanford Site annual dangerous waste report: Volume 1, Part 2, Generator dangerous waste report, dangerous waste

    Energy Technology Data Exchange (ETDEWEB)



    This report contains information on hazardous materials at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, weight, and waste designation.

  12. The tracking system

    Directory of Open Access Journals (Sweden)

    Mozar Jose de Brito


    Full Text Available The surveillance of the people is examined by means of some theoretical considerations under Foucault point of view. These are utilized to study four distinct technological systems. The aim of this revision is discuss the analytical applicability of Foucault’s Panoptic. The starting point is a postulate: new technology has the potential to affect the social relationship in some complex ways. This claim justifies this exploratory essay, that employ some cases afford by the specialized literature. In three situations the Panoptic is found insufficient or inappropriate. But in the truck tracking system the metaphor is found good enough. In conclusion, this could suggest the applicability of the model depends on the sort of the surveillance system in question. However, despite the fact that in some cases the reality is far way of the conditions of the model, the Panoptic metaphor can be conveniently and gainfully applied as illustrated in this paper. Key-words: surveillance, power, Panoptic, tracking system, GPS.

  13. Track finding using GPUs

    CERN Document Server

    Schmitt, C; The ATLAS collaboration


    Track finding using GPUs The reconstruction and simulation of collision events is a major task in modern HEP experiments involving several ten thousands of standard CPUs. On the other hand the graphics processors (GPUs) have become much more powerful and are by far outperforming the standard CPUs in terms of floating point operations due to their massive parallel approach. The usage of these GPUs could therefore significantly reduce the overall reconstruction time per event or allow for the usage of more sophisticated algorithms. In this contribution the track finding in the ATLAS experiment will be used as an example on how the GPUs can be used in this context: the seed finding alone shows already a speed increase of one order of magnitude compared to the same implementation on a standard CPU. On the other hand the implementation on the GPU requires a change in the algorithmic flow to allow the code to work in the rather limited environment on the GPU in terms of memory, cache, and transfer speed from and to...

  14. Tracking Multiple Topics for Finding Interesting Articles

    Energy Technology Data Exchange (ETDEWEB)

    Pon, R K; Cardenas, A F; Buttler, D J; Critchlow, T J


    We introduce multiple topic tracking (MTT) for iScore to better recommend news articles for users with multiple interests and to address changes in user interests over time. As an extension of the basic Rocchio algorithm, traditional topic detection and tracking, and single-pass clustering, MTT maintains multiple interest profiles to identify interesting articles for a specific user given user-feedback. Focusing on only interesting topics enables iScore to discard useless profiles to address changes in user interests and to achieve a balance between resource consumption and classification accuracy. Also by relating a topic's interestingness to an article's interestingness, iScore is able to achieve higher quality results than traditional methods such as the Rocchio algorithm. We identify several operating parameters that work well for MTT. Using the same parameters, we show that MTT alone yields high quality results for recommending interesting articles from several corpora. The inclusion of MTT improves iScore's performance by 9% to 14% in recommending news articles from the Yahoo! News RSS feeds and the TREC11 adaptive filter article collection. And through a small user study, we show that iScore can still perform well when only provided with little user feedback.

  15. Tracking Multiple Topics for Finding Interesting Articles

    Energy Technology Data Exchange (ETDEWEB)

    Pon, R K; Cardenas, A F; Buttler, D J; Critchlow, T J


    We introduce multiple topic tracking (MTT) for iScore to better recommend news articles for users with multiple interests and to address changes in user interests over time. As an extension of the basic Rocchio algorithm, traditional topic detection and tracking, and single-pass clustering, MTT maintains multiple interest profiles to identify interesting articles for a specific user given user-feedback. Focusing on only interesting topics enables iScore to discard useless profiles to address changes in user interests and to achieve a balance between resource consumption and classification accuracy. iScore is able to achieve higher quality results than traditional methods such as the Rocchio algorithm. We identify several operating parameters that work well for MTT. Using the same parameters, we show that MTT alone yields high quality results for recommending interesting articles from several corpora. The inclusion of MTT improves iScore's performance by 25% in recommending news articles from the Yahoo! News RSS feeds and the TREC11 adaptive filter article collection. And through a small user study, we show that iScore can still perform well when only provided with little user feedback.

  16. Covariance tracking: architecture optimizations for embedded systems (United States)

    Romero, Andrés; Lacassagne, Lionel; Gouiffès, Michèle; Zahraee, Ali Hassan


    Covariance matching techniques have recently grown in interest due to their good performances for object retrieval, detection, and tracking. By mixing color and texture information in a compact representation, it can be applied to various kinds of objects (textured or not, rigid or not). Unfortunately, the original version requires heavy computations and is difficult to execute in real time on embedded systems. This article presents a review on different versions of the algorithm and its various applications; our aim is to describe the most crucial challenges and particularities that appeared when implementing and optimizing the covariance matching algorithm on a variety of desktop processors and on low-power processors suitable for embedded systems. An application of texture classification is used to compare different versions of the region descriptor. Then a comprehensive study is made to reach a higher level of performance on multi-core CPU architectures by comparing different ways to structure the information, using single instruction, multiple data (SIMD) instructions and advanced loop transformations. The execution time is reduced significantly on two dual-core CPU architectures for embedded computing: ARM Cortex-A9 and Cortex-A15 and Intel Penryn-M U9300 and Haswell-M 4650U. According to our experiments on covariance tracking, it is possible to reach a speedup greater than ×2 on both ARM and Intel architectures, when compared to the original algorithm, leading to real-time execution.

  17. Improving Student Question Classification (United States)

    Heiner, Cecily; Zachary, Joseph L.


    Students in introductory programming classes often articulate their questions and information needs incompletely. Consequently, the automatic classification of student questions to provide automated tutorial responses is a challenging problem. This paper analyzes 411 questions from an introductory Java programming course by reducing the natural…

  18. Ecosystem classification, Chapter 2 (United States)

    M.J. Robin-Abbott; L.H. Pardo


    The ecosystem classification in this report is based on the ecoregions developed through the Commission for Environmental Cooperation (CEC) for North America (CEC 1997). Only ecosystems that occur in the United States are included. CEC ecoregions are described, with slight modifications, below (CEC 1997) and shown in Figures 2.1 and 2.2. We chose this ecosystem...

  19. Bosniak classification system

    DEFF Research Database (Denmark)

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens


    BACKGROUND: The Bosniak classification was originally based on computed tomographic (CT) findings. Magnetic resonance (MR) and contrast-enhanced ultrasonography (CEUS) imaging may demonstrate findings that are not depicted at CT, and there may not always be a clear correlation between the finding...

  20. Bosniak classification system

    DEFF Research Database (Denmark)

    Graumann, Ole; Osther, Susanne S; Karstoft, Jens


    BACKGROUND: The Bosniak classification is a diagnostic tool for the differentiation of cystic changes in the kidney. The process of categorizing renal cysts may be challenging, involving a series of decisions that may affect the final diagnosis and clinical outcome such as surgical management. PU...

  1. Equivalent Diagnostic Classification Models (United States)

    Maris, Gunter; Bechger, Timo


    Rupp and Templin (2008) do a good job at describing the ever expanding landscape of Diagnostic Classification Models (DCM). In many ways, their review article clearly points to some of the questions that need to be answered before DCMs can become part of the psychometric practitioners toolkit. Apart from the issues mentioned in this article that…

  2. Classifications in popular music

    NARCIS (Netherlands)

    van Venrooij, A.; Schmutz, V.; Wright, J.D.


    The categorical system of popular music, such as genre categories, is a highly differentiated and dynamic classification system. In this article we present work that studies different aspects of these categorical systems in popular music. Following the work of Paul DiMaggio, we focus on four

  3. Dynamic Latent Classification Model

    DEFF Research Database (Denmark)

    Zhong, Shengtong; Martínez, Ana M.; Nielsen, Thomas Dyhre

    as possible. Motivated by this problem setting, we propose a generative model for dynamic classification in continuous domains. At each time point the model can be seen as combining a naive Bayes model with a mixture of factor analyzers (FA). The latent variables of the FA are used to capture the dynamics...

  4. Classification, confusion and misclassification

    African Journals Online (AJOL)

    It must have concerned human beings and animals since they first became aware. Classification is designed to assist understanding. The response to a phenomenon ... endometrial hyperplasia changed and was simplified to include two categories, compared with four previously: from with atypia and without (each of those ...

  5. Shark Teeth Classification (United States)

    Brown, Tom; Creel, Sally; Lee, Velda


    On a recent autumn afternoon at Harmony Leland Elementary in Mableton, Georgia, students in a fifth-grade science class investigated the essential process of classification--the act of putting things into groups according to some common characteristics or attributes. While they may have honed these skills earlier in the week by grouping their own…

  6. Repulsive-SVDD Classification (United States)


    all abnormal data samples outside the hypersphere. This SVDD has been a successful approach to solving one-class problems such as outlier detection...Classification 279 is maximised, similar to the maximal margin philosophy of a support vector machine. A visualisation of RSVC is demonstrated in Fig

  7. Ontologies vs. Classification Systems

    DEFF Research Database (Denmark)

    Madsen, Bodil Nistrup; Erdman Thomsen, Hanne


    data sets or for obtaining advanced search facilities. In this paper we will present an attempt at answering these questions. We will give a presentation of various types of ontologies and briefly introduce terminological ontologies. Furthermore we will argue that classification systems, e.g. product...

  8. Simultaneous Eye Tracking and Blink Detection with Interactive Particle Filters

    Directory of Open Access Journals (Sweden)

    Mohan M. Trivedi


    Full Text Available We present a system that simultaneously tracks eyes and detects eye blinks. Two interactive particle filters are used for this purpose, one for the closed eyes and the other one for the open eyes. Each particle filter is used to track the eye locations as well as the scales of the eye subjects. The set of particles that gives higher confidence is defined as the primary set and the other one is defined as the secondary set. The eye location is estimated by the primary particle filter, and whether the eye status is open or closed is also decided by the label of the primary particle filter. When a new frame comes, the secondary particle filter is reinitialized according to the estimates from the primary particle filter. We use autoregression models for describing the state transition and a classification-based model for measuring the observation. Tensor subspace analysis is used for feature extraction which is followed by a logistic regression model to give the posterior estimation. The performance is carefully evaluated from two aspects: the blink detection rate and the tracking accuracy. The blink detection rate is evaluated using videos from varying scenarios, and the tracking accuracy is given by comparing with the benchmark data obtained using the Vicon motion capturing system. The setup for obtaining benchmark data for tracking accuracy evaluation is presented and experimental results are shown. Extensive experimental evaluations validate the capability of the algorithm.

  9. Probabilistic multi-person localisation and tracking in image sequences (United States)

    Klinger, T.; Rottensteiner, F.; Heipke, C.


    The localisation and tracking of persons in image sequences in commonly guided by recursive filters. Especially in a multi-object tracking environment, where mutual occlusions are inherent, the predictive model is prone to drift away from the actual target position when not taking context into account. Further, if the image-based observations are imprecise, the trajectory is prone to be updated towards a wrong position. In this work we address both these problems by using a new predictive model on the basis of Gaussian Process Regression, and by using generic object detection, as well as instance-specific classification, for refined localisation. The predictive model takes into account the motion of every tracked pedestrian in the scene and the prediction is executed with respect to the velocities of neighbouring persons. In contrast to existing methods our approach uses a Dynamic Bayesian Network in which the state vector of a recursive Bayes filter, as well as the location of the tracked object in the image, are modelled as unknowns. This allows the detection to be corrected before it is incorporated into the recursive filter. Our method is evaluated on a publicly available benchmark dataset and outperforms related methods in terms of geometric precision and tracking accuracy.

  10. Differential Classification of Dementia

    Directory of Open Access Journals (Sweden)

    E. Mohr


    Full Text Available In the absence of biological markers, dementia classification remains complex both in terms of characterization as well as early detection of the presence or absence of dementing symptoms, particularly in diseases with possible secondary dementia. An empirical, statistical approach using neuropsychological measures was therefore developed to distinguish demented from non-demented patients and to identify differential patterns of cognitive dysfunction in neurodegenerative disease. Age-scaled neurobehavioral test results (Wechsler Adult Intelligence Scale—Revised and Wechsler Memory Scale from Alzheimer's (AD and Huntington's (HD patients, matched for intellectual disability, as well as normal controls were used to derive a classification formula. Stepwise discriminant analysis accurately (99% correct distinguished controls from demented patients, and separated the two patient groups (79% correct. Variables discriminating between HD and AD patient groups consisted of complex psychomotor tasks, visuospatial function, attention and memory. The reliability of the classification formula was demonstrated with a new, independent sample of AD and HD patients which yielded virtually identical results (classification accuracy for dementia: 96%; AD versus HD: 78%. To validate the formula, the discriminant function was applied to Parkinson's (PD patients, 38% of whom were classified as demented. The validity of the classification was demonstrated by significant PD subgroup differences on measures of dementia not included in the discriminant function. Moreover, a majority of demented PD patients (65% were classified as having an HD-like pattern of cognitive deficits, in line with previous reports of the subcortical nature of PD dementia. This approach may thus be useful in classifying presence or absence of dementia and in discriminating between dementia subtypes in cases of secondary or coincidental dementia.

  11. REC Tracking Systems Design Guide

    Energy Technology Data Exchange (ETDEWEB)

    Meredith Wingate


    OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

  12. Bayesian Tracking of Visual Objects (United States)

    Zheng, Nanning; Xue, Jianru

    Tracking objects in image sequences involves performing motion analysis at the object level, which is becoming an increasingly important technology in a wide range of computer video applications, including video teleconferencing, security and surveillance, video segmentation, and editing. In this chapter, we focus on sequential Bayesian estimation techniques for visual tracking. We first introduce the sequential Bayesian estimation framework, which acts as the theoretic basis for visual tracking. Then, we present approaches to constructing representation models for specific objects.

  13. Reduce working memory load for visual classification tasks through gaze-based interaction


    Geisler, J; Granacher, T.


    The rate of working memory errors as an influence on the performance of visual classification at computer screens, e. g. in image exploitation, is expected to get reduced by use of gaze tracking instead of conventional pointing techniques. We compared two gaze-based techniques with the usage of a computer mouse: pure visual fixation (PFix) and visual fixation with confirmation (FixC). A prediction of memory errors while performing visual classification has been carried out using the "Human Pr...

  14. Construction and Demolition Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Andersen, L.


    Construction and demolition waste (C&D waste) is the waste generated during the building, repair, remodeling or removal of constructions. The constructions can be roads, residential housing and nonresidential buildings. C&D waste has traditionally been considered without any environmental problems...... and has just been landfilled. However, in recent years more focus has been put on C&D waste and data are starting to appear. One reason is that it has been recognized that C&D waste may include many materials that are contaminated either as part of their original design or through their use and therefore...... should be managed accordingly. Another reason is that it has been documented that a large fraction of C&D waste (about 90 %) can be easily recycled and thus can conserve landfill capacity. C&D waste may conveniently be divided into three subcategories: Buildings, roads and excavations. This chapter...

  15. Health Research Information Tracking System (United States)

    US Agency for International Development — The Health Research Information Tracking System (HRIT) is an expansion of the Child Health Research database that collects and maintains categorization, description,...

  16. Reasonable Accommodation Information Tracking System (United States)

    U.S. Environmental Protection Agency — The Reasonable Accommodation Information Tracking System (RAITS) is a case management system that allows the National Reasonable Accommodation Coordinator (NRAC) and...

  17. Waste canister for storage of nuclear wastes (United States)

    Duffy, James B.


    A waste canister for storage of nuclear wastes in the form of a solidified glass includes fins supported from the center with the tips of the fins spaced away from the wall to conduct heat away from the center without producing unacceptable hot spots in the canister wall.

  18. Business unusual - Waste Act implementation: solid waste

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH


    Full Text Available The preamble to the Waste Act (2008) is very clear that, as a result of this legislation, waste management in South Africa will never be the same again. This should send a clear message that ‘business as usual’ will no longer be sufficient....

  19. Experimental improvements in sample preparation for the track registration technique from dry and solution media

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Navarro, M.J. [Universidad Politecnica de Madrid (UPM), E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren s/n, 28040 Madrid (Spain)]. E-mail:; Pujol, Ll. [Centro de Estudios y Experimentacion de Obras Publicas (CEDEX), Alfonso XII, 3, 28014 Madrid (Spain); Gonzalez-Gonzalez, J.A. [Universidad Politecnica de Madrid (UPM), E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren s/n, 28040 Madrid (Spain)


    This paper describes the sample preparation studies carried out to determine gross alpha activities in waste materials by means of alpha-particle track counting using CR-39 detector. Sample preparation for the track registration technique using evaporation or electroplating methods (also known as conventional 'dry methods') has a number of drawbacks. The distribution of tracks in different areas of the detector surface is non-uniform, so accurate quantitative determinations depend on tedious and time-consuming counting of tracks under an optical microscope. In this paper, we propose the use of tensioactives in sample preparation to achieve uniform track distribution over the entire detector surface, which enables track density to be evaluated by scanning a small representative area. Under our counting conditions, uniform distribution was achieved with 0.2 ml of Teg from a planchetted source. Furthermore, track registration techniques using solution media (also known as the 'wet methods') and conventional 'dry methods' were analysed and compared with the proposed method. The reproducibility of the procedure described in the study was tested by analysing gross alpha activity in two low-level nuclear waste samples at two different laboratories.

  20. [Classification of primary bone tumors]. (United States)

    Dominok, G W; Frege, J


    An expanded classification for bone tumors is presented based on the well known international classification as well as earlier systems. The current status and future trends in this area are discussed.

  1. An Ecological Diagnostic Classification Plan. (United States)

    Hurst, James C.; McKinley, Donna L.


    Discusses the value of diagnostic classification systems to counseling professionals. Describes the Ecological Diagnostic Classification Plan, an approach to diagnosis that includes the environment as a possible cause of pathology and target of intervention. (Author/KS)

  2. Biohazardous waste management plan.

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Todd W.


    This plan describes the process for managing non-medical biohazardous waste at Sandia National Laboratories California. It applies to operations at the Chemical and Radiation Detection Laboratory (CRDL), Building 968, and other biosafety level 1 or 2 activities at the site. It addresses the accumulation, storage, treatment and disposal of biohazardous waste and sharps waste. It also describes the procedures to comply with regulatory requirements and SNL policies applicable to non-medical biohazardous waste.

  3. Medical waste management plan.

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Todd W.; VanderNoot, Victoria A.


    This plan describes the process for managing research generated medical waste at Sandia National Laboratories/California. It applies to operations at the Chemical and Radiation Detection Laboratory (CRDL), Building 968, and other biosafety level 1 or 2 activities at the site. It addresses the accumulation, storage, treatment and disposal of medical waste and sharps waste. It also describes the procedures to comply with regulatory requirements and SNL policies applicable to medical waste.



    Truptimala Patanaik; Ambika Priyadarshini Mishra; Aishariya Durga; Gayatri Avipsa


    The towns and cities have become the centres of population growth and require three essential services viz., water supply, waste water treatment and solid wastes disposal. The tremendous increase in population accelerates the amount of municipal solid waste (MSW) generation. Hence, the solid waste management (SWM) is one of the essential municipal services, to protect the environment, safeguard public health services and improve productivity.   In this context the case study is c...

  5. Solid waste handling

    Energy Technology Data Exchange (ETDEWEB)

    Parazin, R.J.


    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).

  6. Solar tracking system (United States)

    White, P. R.; Scott, D. R. (Inventor)


    A solar tracker for a solar collector is described in detail. The collector is angularly oriented by a motor wherein the outputs of two side-by-side photodetectors are discriminated as to three ranges: a first corresponding to a low light or darkness condition; a second corresponding to light intensity lying in an intermediate range; and a third corresponding to light above an intermediate range, direct sunlight. The first output drives the motor to a selected maximum easterly angular position; the second enables the motor to be driven westerly at the Earth rotational rate; and the third output, the separate outputs of the two photodetectors, differentially controls the direction of rotation of the motor to effect actual tracking of the Sun.

  7. Microencapsulated cell tracking (United States)

    Arifin, Dian R.; Kedziorek, Dorota A.; Fu, Yingli; Chan, Kannie W. Y.; McMahon, Michael T.; Weiss, Clifford R.; Kraitchman, Dara L.; Bulte, Jeff W. M.


    Microencapsulation of therapeutic cells has been widely pursued to achieve cellular immunoprotection following transplantation. Initial clinical studies have shown the potential of microencapsulation using semi-permeable alginate layers, but much needs to be learned about the optimal delivery route, in vivo pattern of engraftment, and microcapsule stability over time. In parallel with noninvasive imaging techniques for ‘naked’ (i.e. unencapsulated) cell tracking, microcapsules have now been endowed with contrast agents that can be visualized by 1H MRI, 19F MRI, X-ray/computed tomography and ultrasound imaging. By placing the contrast agent formulation in the extracellular space of the hydrogel, large amounts of contrast agents can be incorporated with negligible toxicity. This has led to a new generation of imaging biomaterials that can render cells visible with multiple imaging modalities. PMID:23225358

  8. An Alternative to Performing Remote-Handled Transuranic Waste Container Headspace Gas Sampling and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Spangler, L. R.; Djordjevic, S. M.; Kehrman, R. F.; Most, W. A.


    The Waste Isolation Pilot Plant (WIPP) is operating under a Resource Conservation and Recovery Act (RCRA) Hazardous Waste Facility Permit (HWFP) for contact-handled (CH) transuranic (TRU) waste. The HWFP contains limitations on allowable emissions from waste disposed in the underground. This environmental performance standard imposed on the WIPP consists of limiting volatile organic compound (VOC) emissions from emplaced waste to ensure protection of human health and the environment. The standard is currently met by tracking individual waste container headspace gas concentrations, which are determined by headspace gas sampling and analysis of CH TRU waste containers. The WIPP is seeking a HWFP modification to allow the disposal of remote-handled (RH) TRU waste. Because RH TRU waste is limited to approximately 5% of the waste volume and is emplaced in the disposal room walls, it is possible to bound the potential RH TRU waste contribution to VOC emissions using conservative upper bounds. These conservative upper bounds were developed as an alternative to RH TRU waste canister headspace gas sampling and analysis. The methodology used to perform the calculations used to evaluate VOC emissions from emplaced RH TRU waste canisters applied the same equations as those used to evaluate VOC emissions in the original HWFP application.

  9. Empirical Analysis and Automated Classification of Security Bug Reports (United States)

    Tyo, Jacob P.


    With the ever expanding amount of sensitive data being placed into computer systems, the need for effective cybersecurity is of utmost importance. However, there is a shortage of detailed empirical studies of security vulnerabilities from which cybersecurity metrics and best practices could be determined. This thesis has two main research goals: (1) to explore the distribution and characteristics of security vulnerabilities based on the information provided in bug tracking systems and (2) to develop data analytics approaches for automatic classification of bug reports as security or non-security related. This work is based on using three NASA datasets as case studies. The empirical analysis showed that the majority of software vulnerabilities belong only to a small number of types. Addressing these types of vulnerabilities will consequently lead to cost efficient improvement of software security. Since this analysis requires labeling of each bug report in the bug tracking system, we explored using machine learning to automate the classification of each bug report as a security or non-security related (two-class classification), as well as each security related bug report as specific security type (multiclass classification). In addition to using supervised machine learning algorithms, a novel unsupervised machine learning approach is proposed. An ac- curacy of 92%, recall of 96%, precision of 92%, probability of false alarm of 4%, F-Score of 81% and G-Score of 90% were the best results achieved during two-class classification. Furthermore, an accuracy of 80%, recall of 80%, precision of 94%, and F-score of 85% were the best results achieved during multiclass classification.

  10. Resident Knowledge and Willingness to Engage in Waste Management in Delhi, India

    Directory of Open Access Journals (Sweden)

    Sudipta Bhawal Mukherji


    Full Text Available Delhi generates about 8360 tons of municipal solid waste per day, and there is low compliance to rules regarding waste management. The objective of this paper was to understand the situation in Delhi with respect to the segregation, storage, collection, and disposal of household waste, and to assess the knowledge of the residents of Delhi, and their willingness to engage in solid-waste management. A stratified random sample, comprising 3047 respondents, was chosen for a questionnaire survey, covering all municipalities of Delhi, with socio-economic classification as the stratifying variable. Survey results indicate that 60% of residents do not know the difference between biodegradable and non-biodegradable waste, and only 2% of them segregate waste. Fifty-eight percent of respondents reported that the waste collector mixes the segregated waste, 97% of respondents reported that they sold items to an itinerant waste buyer, and 87% of households are covered by doorstep waste collection services. Abstract knowledge (general knowledge about waste management is seen to have a significant correlation with willingness to engage in waste management. Differences between the socio-economic groups indicate that the highest (most educated and wealthy, as well as the lowest socio-economic category (least educated and poor, older age-groups, and women, have greater abstract knowledge. Socio-economic categories having higher abstract knowledge can be active participants in decentralized models of waste management.

  11. Household food waste

    NARCIS (Netherlands)

    Wahlen, S.; Winkel, Thomas


    Food waste is debated not only in the light of sustainable consumption in research and policy, but also in the broader public. This article focuses on food waste in household contexts, what is widely believed the end of the food chain. However, household food waste is far more complex and intricate

  12. Nuclear wastes; Dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)



    Here is made a general survey of the situation relative to radioactive wastes. The different kinds of radioactive wastes and the different way to store them are detailed. A comparative evaluation of the situation in France and in the world is made. The case of transport of radioactive wastes is tackled. (N.C.)

  13. Waste disposal package (United States)

    Smith, M.J.


    This is a claim for a waste disposal package including an inner or primary canister for containing hazardous and/or radioactive wastes. The primary canister is encapsulated by an outer or secondary barrier formed of a porous ceramic material to control ingress of water to the canister and the release rate of wastes upon breach on the canister. 4 figs.

  14. Radioactive Wastes. Revised. (United States)

    Fox, Charles H.

    This publication is one of a series of information booklets for the general public published by the United States Atomic Energy Commission. This booklet deals with the handling, processing and disposal of radioactive wastes. Among the topics discussed are: The Nature of Radioactive Wastes; Waste Management; and Research and Development. There are…

  15. Rock & Roll : Waste seperation

    NARCIS (Netherlands)

    Beunder, L.; Rem, P.C.; Van Den Berg, R.


    Five hundred tonnes of glass, 1 million tonnes of plastic,14 million tonnes of building and demolition waste, 7 million tonnes of household waste, 3 million tonnes of packaging, 3.5 million tonnes of paper and board, and 300,000 old cars. All part of the annual harvest of waste materials in the

  16. Waste vs Resource Management

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH


    Full Text Available Recent global waste statistics show that in the order of 70% of all municipal waste generated worldwide is disposed at landfill, 11% is treated in thermal and Waste-to-Energy (WtE) facilities and the rest (19%) is recycled or treated by mechanical...

  17. Superiority of Classification Tree versus Cluster, Fuzzy and Discriminant Models in a Heartbeat Classification System. (United States)

    Krasteva, Vessela; Jekova, Irena; Leber, Remo; Schmid, Ramun; Abächerli, Roger


    This study presents a 2-stage heartbeat classifier of supraventricular (SVB) and ventricular (VB) beats. Stage 1 makes computationally-efficient classification of SVB-beats, using simple correlation threshold criterion for finding close match with a predominant normal (reference) beat template. The non-matched beats are next subjected to measurement of 20 basic features, tracking the beat and reference template morphology and RR-variability for subsequent refined classification in SVB or VB-class by Stage 2. Four linear classifiers are compared: cluster, fuzzy, linear discriminant analysis (LDA) and classification tree (CT), all subjected to iterative training for selection of the optimal feature space among extended 210-sized set, embodying interactive second-order effects between 20 independent features. The optimization process minimizes at equal weight the false positives in SVB-class and false negatives in VB-class. The training with European ST-T, AHA, MIT-BIH Supraventricular Arrhythmia databases found the best performance settings of all classification models: Cluster (30 features), Fuzzy (72 features), LDA (142 coefficients), CT (221 decision nodes) with top-3 best scored features: normalized current RR-interval, higher/lower frequency content ratio, beat-to-template correlation. Unbiased test-validation with MIT-BIH Arrhythmia database rates the classifiers in descending order of their specificity for SVB-class: CT (99.9%), LDA (99.6%), Cluster (99.5%), Fuzzy (99.4%); sensitivity for ventricular ectopic beats as part from VB-class (commonly reported in published beat-classification studies): CT (96.7%), Fuzzy (94.4%), LDA (94.2%), Cluster (92.4%); positive predictivity: CT (99.2%), Cluster (93.6%), LDA (93.0%), Fuzzy (92.4%). CT has superior accuracy by 0.3-6.8% points, with the advantage for easy model complexity configuration by pruning the tree consisted of easy interpretable 'if-then' rules.

  18. Superiority of Classification Tree versus Cluster, Fuzzy and Discriminant Models in a Heartbeat Classification System.

    Directory of Open Access Journals (Sweden)

    Vessela Krasteva

    Full Text Available This study presents a 2-stage heartbeat classifier of supraventricular (SVB and ventricular (VB beats. Stage 1 makes computationally-efficient classification of SVB-beats, using simple correlation threshold criterion for finding close match with a predominant normal (reference beat template. The non-matched beats are next subjected to measurement of 20 basic features, tracking the beat and reference template morphology and RR-variability for subsequent refined classification in SVB or VB-class by Stage 2. Four linear classifiers are compared: cluster, fuzzy, linear discriminant analysis (LDA and classification tree (CT, all subjected to iterative training for selection of the optimal feature space among extended 210-sized set, embodying interactive second-order effects between 20 independent features. The optimization process minimizes at equal weight the false positives in SVB-class and false negatives in VB-class. The training with European ST-T, AHA, MIT-BIH Supraventricular Arrhythmia databases found the best performance settings of all classification models: Cluster (30 features, Fuzzy (72 features, LDA (142 coefficients, CT (221 decision nodes with top-3 best scored features: normalized current RR-interval, higher/lower frequency content ratio, beat-to-template correlation. Unbiased test-validation with MIT-BIH Arrhythmia database rates the classifiers in descending order of their specificity for SVB-class: CT (99.9%, LDA (99.6%, Cluster (99.5%, Fuzzy (99.4%; sensitivity for ventricular ectopic beats as part from VB-class (commonly reported in published beat-classification studies: CT (96.7%, Fuzzy (94.4%, LDA (94.2%, Cluster (92.4%; positive predictivity: CT (99.2%, Cluster (93.6%, LDA (93.0%, Fuzzy (92.4%. CT has superior accuracy by 0.3-6.8% points, with the advantage for easy model complexity configuration by pruning the tree consisted of easy interpretable 'if-then' rules.

  19. The future of general classification

    DEFF Research Database (Denmark)

    Mai, Jens Erik


    Discusses problems related to accessing multiple collections using a single retrieval language. Surveys the concepts of interoperability and switching language. Finds that mapping between more indexing languages always will be an approximation. Surveys the issues related to general classification...... and contrasts that to special classifications. Argues for the use of general classifications to provide access to collections nationally and internationally....

  20. Dynamic comparison of different types of slab tracks and ballasted track using a flexible track model


    Blanco-Lorenzo, Julio; Santamaría Manrique, Javier; García Vadillo, Ernesto; Oyarzabal de Celis, Olatz


    The dynamic performance of a ballasted track and three types of slab tracks is analysed and compared by means of a comprehensive dynamic model of the train-track system, generated using two commercial analysis software packages: the commercial Multibody System (MBS) analysis software SIMPACK and the Finite Element Method (FEM) analysis software NASTRAN. The use of a commercial MBS software makes it possible to include in a reliable way models of advanced non-linear wheel-rail contact, as well...

  1. Criteria for organic matter classification in composting plant; Criterios para la clasificacion granulometrica de la materia organica en una planta de compostaje

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Zala, M.


    The granulometric classification in a waste treatment installation requires the obtaining of high yields and purity in the recovered material, establishing the basis to link both concepts in a suitable economic way. (Author)

  2. Visual tracking based on extreme learning machine and sparse representation. (United States)

    Wang, Baoxian; Tang, Linbo; Yang, Jinglin; Zhao, Baojun; Wang, Shuigen


    The existing sparse representation-based visual trackers mostly suffer from both being time consuming and having poor robustness problems. To address these issues, a novel tracking method is presented via combining sparse representation and an emerging learning technique, namely extreme learning machine (ELM). Specifically, visual tracking can be divided into two consecutive processes. Firstly, ELM is utilized to find the optimal separate hyperplane between the target observations and background ones. Thus, the trained ELM classification function is able to remove most of the candidate samples related to background contents efficiently, thereby reducing the total computational cost of the following sparse representation. Secondly, to further combine ELM and sparse representation, the resultant confidence values (i.e., probabilities to be a target) of samples on the ELM classification function are used to construct a new manifold learning constraint term of the sparse representation framework, which tends to achieve robuster results. Moreover, the accelerated proximal gradient method is used for deriving the optimal solution (in matrix form) of the constrained sparse tracking model. Additionally, the matrix form solution allows the candidate samples to be calculated in parallel, thereby leading to a higher efficiency. Experiments demonstrate the effectiveness of the proposed tracker.

  3. Sound classification of dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit


    National schemes for sound classification of dwellings exist in more than ten countries in Europe, typically published as national standards. The schemes define quality classes reflecting different levels of acoustical comfort. Main criteria concern airborne and impact sound insulation between...... dwellings, facade sound insulation and installation noise. The schemes have been developed, implemented and revised gradually since the early 1990s. However, due to lack of coordination between countries, there are significant discrepancies, and new standards and revisions continue to increase the diversity...... is needed, and a European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", has been established and runs 2009-2013, one of the main objectives being to prepare a proposal for a European sound classification scheme with a number of quality...



    Natalia Romanova


    New types of criminal groups are emerging in modern society.  These types have their special criminal subculture. The research objective is to develop new parameters of classification of modern criminal groups, create a new typology of criminal groups and identify some features of their subculture. Research methodology is based on the system approach that includes using the method of analysis of documentary sources (materials of a criminal case), method of conversations with themembers of the...

  5. Classification and regression trees

    CERN Document Server

    Breiman, Leo; Olshen, Richard A; Stone, Charles J


    The methodology used to construct tree structured rules is the focus of this monograph. Unlike many other statistical procedures, which moved from pencil and paper to calculators, this text's use of trees was unthinkable before computers. Both the practical and theoretical sides have been developed in the authors' study of tree methods. Classification and Regression Trees reflects these two sides, covering the use of trees as a data analysis method, and in a more mathematical framework, proving some of their fundamental properties.

  6. Classification of myocardial infarction

    DEFF Research Database (Denmark)

    Saaby, Lotte; Poulsen, Tina Svenstrup; Hosbond, Susanne Elisabeth


    The classification of myocardial infarction into 5 types was introduced in 2007 as an important component of the universal definition. In contrast to the plaque rupture-related type 1 myocardial infarction, type 2 myocardial infarction is considered to be caused by an imbalance between demand...... and supply of oxygen in the myocardium. However, no specific criteria for type 2 myocardial infarction have been established....

  7. Simultaneous tracking and activity recognition

    DEFF Research Database (Denmark)

    Manfredotti, Cristina Elena; Fleet, David J.; Hamilton, Howard J.


    Many tracking problems involve several distinct objects interacting with each other. We develop a framework that takes into account interactions between objects allowing the recognition of complex activities. In contrast to classic approaches that consider distinct phases of tracking and activity...


    The Contract Administrative Tracking System (CATS) was developed in response to an ORD NHEERL, Mid-Continent Ecology Division (MED)-recognized need for an automated tracking and retrieval system for Cost Reimbursable Level of Effort (CR/LOE) Contracts. CATS is an Oracle-based app...

  9. Satellite and acoustic tracking device

    KAUST Repository

    Berumen, Michael L.


    The present invention relates a method and device for tracking movements of marine animals or objects in large bodies of water and across significant distances. The method and device can track an acoustic transmitter attached to an animal or object beneath the ocean surface by employing an unmanned surface vessel equipped with a hydrophone array and GPS receiver.

  10. Do Not Track for Europe

    NARCIS (Netherlands)

    Zuiderveen Borgesius, F.J.; McDonald, A.M.


    Online tracking is the subject of heated debates. In Europe, policy debates focus on the e-Privacy Directive, which requires firms to obtain the consumer’s consent for the use of tracking cookies and similar technologies. A common complaint about the Directive is that clicking "I agree" to hundreds

  11. Making Sense of Dinosaur Tracks (United States)

    MacKenzie, Ann Haley; McDowell, Brian


    What do paleontologists, dinosaur tracks, and the nature of science have in common? They're combined here in an inquiry activity where students use methods of observation and inference to devise evidence-based explanations for the data they collect about dinosaur tracks, much like the methods used by paleontologists. Students then debate the…

  12. National inventory of radioactive wastes and recoverable materials 2006. Descriptive catalogue of radioactive waste families; Inventaire national des dechets radioactifs et des matieres valorisables 2006. Catalogue descriptif des familles de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)



    Real comprehensive overview of radioactive wastes, the national inventory of radioactive wastes and recoverable materials describes the situation in France of the wastes that can be conditioned (in their definitive form) or not. It presents also the waste production quantities foreseen for 2010, 2020 and beyond. This document is a complement to the synthesis report and to the geographic inventory of radioactive wastes in France and details the classification of wastes by families (wastes with similar characteristics). For each family of wastes, the description comprises a general presentation and some photos. It comprises also some data such as the position of the family in the French classification, the industrial activity at the origin of the waste, the production situation of the waste in concern (finished, in progress, not started). Some information about the raw waste are given and the conditioning process used is described. Some figures complete the description, like: the past and future production quantities, the evaluation of the radioactivity of the waste family in 2004 and 2020, and the evaluation of the thermal power when available. Finally, some information are given about the presence of compounds with a specific risk of toxicity. (J.S.)

  13. Neuromuscular disease classification system (United States)

    Sáez, Aurora; Acha, Begoña; Montero-Sánchez, Adoración; Rivas, Eloy; Escudero, Luis M.; Serrano, Carmen


    Diagnosis of neuromuscular diseases is based on subjective visual assessment of biopsies from patients by the pathologist specialist. A system for objective analysis and classification of muscular dystrophies and neurogenic atrophies through muscle biopsy images of fluorescence microscopy is presented. The procedure starts with an accurate segmentation of the muscle fibers using mathematical morphology and a watershed transform. A feature extraction step is carried out in two parts: 24 features that pathologists take into account to diagnose the diseases and 58 structural features that the human eye cannot see, based on the assumption that the biopsy is considered as a graph, where the nodes are represented by each fiber, and two nodes are connected if two fibers are adjacent. A feature selection using sequential forward selection and sequential backward selection methods, a classification using a Fuzzy ARTMAP neural network, and a study of grading the severity are performed on these two sets of features. A database consisting of 91 images was used: 71 images for the training step and 20 as the test. A classification error of 0% was obtained. It is concluded that the addition of features undetectable by the human visual inspection improves the categorization of atrophic patterns.

  14. Seismic event classification system (United States)

    Dowla, Farid U.; Jarpe, Stephen P.; Maurer, William


    In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities.

  15. [Morphological classification of glioblastomas]. (United States)

    Figarella-Branger, D; Bouvier, C; Moroch, J; Michalak, S; F Burel-Vandenbos


    In the 2007 WHO classification, glioblastomas are classified among the group of astrocytic tumors. They are highly malignant (grade IV). This group of tumors is morphologically heterogeneous. The WHO distinguishes between clinico-pathological entities, variants of entities and histological pattern. Variants are defined as being reliably indentified histologically and having some relevance for clinical outcome but as still being part of a previously defined overarching entity. Patterns of differentiation are identifiable by histological appearances but without clinical or pathological significance. The description of the histological and immunohistochemical features is based on the 2007 WHO classification. In addition to the classic form of glioblastoma, two variants exist: the giant cell GBM and the gliosarcoma. The first but not the second would have a better outcome than the classic glioblastoma. The WHO classification also distinguishes several patterns of differentiation: small cells glioblastoma; glioblastoma with lipidized cells; glioblastoma with oligodendroglioma component; glioblastoma with heterologous differentiation. These patterns have to be recognized because they represent sometimes a diagnostic challenge. GFAP, Olig2 and Mib1/Ki67 are the most relevant immunohistochemical markers. Diagnostic value of neuronal markers is still controversial. EGFR or p53 expression can be detected and their prognosis value is discussed in this chapter. A systematic analysis of some markers in routine, for example IDH1 or internexin-a, could help to define more homogeneous groups of patients. Copyright © 2010 Elsevier Masson SAS. All rights reserved.

  16. [Myelodysplastic syndrome classification]. (United States)

    Ghariani, Ines; Braham, Najia; Hassine, Mohsen; Kortas, Mondher


    Myelodysplastic syndromes (MDS) are myeloid disorders with various clinical and biological presentations. The French-American-British (FAB-1982) classification included five categories basing on morphology and bone marrow blast count. Three criteria are taken into account: 1) the percentage of blasts in peripheral blood and bone marrow, 2) the percentage of ringed sideroblasts, and 3) the number of monocytes in peripheral blood. The World Health Organization classification (WHO 2001, 2008) modifies the FAB system by also taking cytogenetic characteristics and molecular biology into consideration. The last classification (WHO-2008) takes into account: 1) the number of peripheral cytopenia, 2) the percentage of blasts in peripheral blood and bone marrow, 3) the percentage of ringed sideroblasts, 4) the possible presence of Auer Rods, and 5) the detection of a cytogenetic abnormality (the isolated 5q deletion). The following subgroups are defined: refractory cytopenia with unilineage dysplasia, refractory anemia with ringed sideroblasts, refractory cytopenia with multilineage dysplasia, refractory anemia with excess blasts, myelodysplastic syndrome unclassifiable and myelodysplastic syndrome with isolated del(5q).

  17. COCOA: tracking in aerial imagery (United States)

    Ali, Saad; Shah, Mubarak


    Unmanned Aerial Vehicles (UAVs) are becoming a core intelligence asset for reconnaissance, surveillance and target tracking in urban and battlefield settings. In order to achieve the goal of automated tracking of objects in UAV videos we have developed a system called COCOA. It processes the video stream through number of stages. At first stage platform motion compensation is performed. Moving object detection is performed to detect the regions of interest from which object contours are extracted by performing a level set based segmentation. Finally blob based tracking is performed for each detected object. Global tracks are generated which are used for higher level processing. COCOA is customizable to different sensor resolutions and is capable of tracking targets as small as 100 pixels. It works seamlessly for both visible and thermal imaging modes. The system is implemented in Matlab and works in a batch mode.

  18. Pathways for Disposal of Commercially-Generated Tritiated Waste

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Nancy V. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Environmental Sciences and Biotechnology


    transportation, processing and disposal vary based a number of factors. In many cases, wastes with very low radioactivity are priced primarily based on weight or volume. For higher activities, costs are based on both volume and activity, with the activity-based charges usually being much larger than volume-based charges. Other factors affecting cost include location, waste classification and form, other hazards in the waste, etc. Costs may be based on general guidelines used by an individual disposal or processing site, but final costs are established by specific contract with each generator. For this report, seven hypothetical waste streams intended to represent commercially-generated tritiated waste were defined in order to calculate comparative costs. Ballpark costs for disposition of these hypothetical waste streams were calculated. These costs ranged from thousands to millions of dollars. Due to the complexity of the cost-determining factors mentioned above, the costs calculated in this report should be understood to represent very rough cost estimates for the various hypothetical wastes. Actual costs could be higher or could be lower due to quantity discounts or other factors.

  19. Mixed waste management options

    Energy Technology Data Exchange (ETDEWEB)

    Owens, C.B.; Kirner, N.P. [EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.


    Disposal fees for mixed waste at proposed commercial disposal sites have been estimated to be $15,000 to $40,000 per cubit foot. If such high disposal fees are imposed, generators may be willing to apply extraordinary treatment or regulatory approaches to properly dispose of their mixed waste. This paper explores the feasibility of several waste management scenarios and attempts to answer the question: Can mixed waste be managed out of existence? Existing data on commercially generated mixed waste streams are used to identify the realm of mixed waste known to be generated. Each waste stream is evaluated from both a regulatory and technical perspective in order to convert the waste into a strictly low-level radioactive or a hazardous waste. Alternative regulatory approaches evaluated in this paper include a delisting petition, no migration petition, and a treatability variance. For each waste stream, potentially available treatment options are identified that could lead to these variances. Waste minimization methodology and storage for decay are also considered. Economic feasibility of each option is discussed broadly.

  20. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.


    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  1. Mixed waste: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E. [eds.] [Temple Univ., Philadelphia, PA (United States). Dept. of Environmental Safety and Health


    This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.

  2. Introduction to Waste Engineering

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund


    Solid waste management as introduced in Chapter 1.1 builds in many ways on engineering. Waste engineering here means the skills and ability to understand quantitatively how a waste management system works in such a detail that waste management can be planned, facilities can be designed and sited...... and systems can be operated in a way that is environmentally sound, technical feasible, economically efficient and socially acceptable. This applies to all scales of relevance: (1) national surveys of energy use and material flows determining the frame for politically setting goals in waste management, (2......) regional plans for waste management, including (3) the selection of main management technologies and siting of facilities, (4) the design of individual technological units and, for example, (5) the operation of recycling schemes within a municipality. This chapter gives an introduction to waste engineering...

  3. NucliTrack: an integrated nuclei tracking application. (United States)

    Cooper, Sam; Barr, Alexis R; Glen, Robert; Bakal, Chris


    Live imaging studies give unparalleled insight into dynamic single cell behaviours and fate decisions. However, the challenge of reliably tracking single cells over long periods of time limits both the throughput and ease with which such studies can be performed. Here, we present NucliTrack, a cross platform solution for automatically segmenting, tracking and extracting features from fluorescently labelled nuclei. NucliTrack performs similarly to other state-of-the-art cell tracking algorithms, but NucliTrack's interactive, graphical interface makes it significantly more user friendly. NucliTrack is available as a free, cross platform application and open source Python package. Installation details and documentation are at: A video guide can be viewed online: Source code is available through Github: A Matlab toolbox is also available at: Supplementary data are available at Bioinformatics online.

  4. Expected track length estimation using track break statistics (United States)

    Arambel, Pablo O.; Finn, Lucas I.


    We consider the problem of estimating the performance of a system that tracks moving objects on the ground using airborne sensors. Expected Track Life (ETL) is a measure of performance that indicates the ability of a tracker to maintain track for extended periods of time. The most desirable method for computing ETL would involve the use of large sets of real data with accompanying truth. This accurately accounts for sensor artifacts and data characteristics, which are difficult to simulate. However, datasets with these characteristics are difficult to collect because the coverage area of the sensors is limited, the collection time is limited, and the number of objects that can realistically be truthed is also limited. Thus when using real datasets, many tracks are terminated because the objects leave the field of view or the end of the dataset is reached. This induces a bias in the estimation when the ETL is computed directly from the tracks. An alternative to direct ETL computation is the use of Markov-Chain models that use track break statistics to estimate ETL. This method provides unbiased ETL estimates from datasets much shorter than what would be required for direct computation. In this paper we extend previous work in this area and derive an explicit expression of the ETL as a function of track break statistics. An example illustrates the properties and advantages of the method.

  5. Maximum mutual information regularized classification

    KAUST Repository

    Wang, Jim Jing-Yan


    In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.

  6. Improving Efficiency of Classification using PCA and Apriori based Attribute Selection Technique


    K. Rajeswari; Rohit Garud; V. Vaithiyanathan


    The aim of this study is to select significant features that contribute for accuracy in classification. Data mining is a field where we find lots of data which can be useful or useless in any form available in Data Warehouse. Implementing classification on these huge, uneven, useless data sets with large number of features is just a waste of time degrading the efficiency of classification algorithms and hence the results are not much accurate. Hence we propose a system in which we first use P...

  7. Evaluation of heavy metals in the process of composting organic waste of coca leaves

    Directory of Open Access Journals (Sweden)

    Apaza-Condori Emma Eva


    Full Text Available The present study is to evaluate the total concentrations of the heavy metals in waste compost samples from coca leaf. This work was carried out Kallutaca Experimental Center, Biofertilizers module Career Agricultural Engineering at the Public University of El Alto, La Paz municipality of Laja. Posed treatments were: T1 (+ Yogurt Coca wastes; T2 (Coca wastes + whey; T3 (Coca wastes + yeast and T4 (Control. The design was completely randomized with 4 treatments and 3 repetitions. The concentration of heavy metals (cadmium, copper, nickel, lead, mercury and chromium; they were categorized into Class A, for the four treatments according to the classifications established by Moreno & Moral (2008.

  8. Integrating Total Quality Management (TQM) and hazardous waste management

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, Nancy [Colorado State Univ., Fort Collins, CO (United States)


    The Resource Conservation and Recovery Act (RCRA) of 1976 and its subsequent amendments have had a dramatic impact on hazardous waste management for business and industry. The complexity of this law and the penalties for noncompliance have made it one of the most challenging regulatory programs undertaken by the Environmental Protection Agency (EPA). The fundamentals of RCRA include ``cradle to grave`` management of hazardous waste, covering generators, transporters, and treatment, storage, and disposal facilities. The regulations also address extensive definitions and listing/identification mechanisms for hazardous waste along with a tracking system. Treatment is favored over disposal and emphasis is on ``front-end`` treatment such as waste minimization and pollution prevention. A study of large corporations such as Xerox, 3M, and Dow Chemical, as well as the public sector, has shown that well known and successful hazardous waste management programs emphasize pollution prevention and employment of techniques such as proactive environmental management, environmentally conscious manufacturing, and source reduction. Nearly all successful hazardous waste programs include some aspects of Total Quality Management, which begins with a strong commitment from top management. Hazardous waste management at the Rocky Flats Plant is further complicated by the dominance of ``mixed waste`` at the facility. The mixed waste stems from the original mission of the facility, which was production of nuclear weapons components for the Department of Energy (DOE). A Quality Assurance Program based on the criterion in DOE Order 5700.6C has been implemented at Rocky Flats. All of the elements of the Quality Assurance Program play a role in hazardous waste management. Perhaps one of the biggest waste management problems facing the Rocky Flats Plant is cleaning up contamination from a forty year mission which focused on production of nuclear weapon components.

  9. 40 CFR 152.164 - Classification procedures. (United States)


    ... physical properties, in common. (b) Classification reviews. The Agency may conduct classification reviews... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Classification procedures. 152.164... PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152.164 Classification...

  10. 75 FR 24755 - DTE ENERGY; Enrico Fermi Atomic Power Plant Unit 1; Exemption From Certain Low-Level Waste... (United States)


    ... COMMISSION DTE ENERGY; Enrico Fermi Atomic Power Plant Unit 1; Exemption From Certain Low-Level Waste Shipment Tracking Requirements In 10 CFR Part 20 Appendix G 1.0 Background DTE Energy (DTE) is the licensee.... DTE is in the process of decommissioning Fermi-1 and radioactive waste shipments from the site are...

  11. Proceedings of the US Department of Energy Office of Environmental Restoration and Waste Management

    Energy Technology Data Exchange (ETDEWEB)


    The fifth of a series of waste minimization (WMIN)/reduction workshops (Waste Reduction Workshop V) was held at the Little Tree Inn in Idaho Falls, Idaho, on July 24--26, 1990. The workshops are held under the auspices of the US Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management (EM). The purpose of this workshop was to provide a forum for sharing site activities in WMIN/reduction planning. Topics covered were management commitment, organizational structure, goal setting, reporting requirements, data bases and tracking systems, pollution prevention, awareness and incentives, information exchange, process waste assessment (PWA) implementation, and recycling internal and external. The workshops assist DOE waste-generating sites in implementing WMIN/reduction programs, plans, and activities, thus providing for optimal waste reduction within the DOE complex. All wastes are considered within this discipline: liquid, solid, and airborne, within the categories of high-level waste (HLW), transuranic waste (TRU), low-level waste (LLW), hazardous waste, and mixed waste.

  12. Nanowastes and environment: A new approach in waste management

    Directory of Open Access Journals (Sweden)

    Merve ÖZKALELİ


    Full Text Available Naturally occurring nanoparticles (NPs have been synthesized to be used in many sectors, and their physical and chemical properties have been modified for intended usages. Especially in the last 20 years, in parallel with an increase in production and application of NP and nanoproducts, a rapid increase in the amount of waste has been considered. Wastes occurred from production to consumption of NPs at several stages are discharged into the receiving environment. However, nanowastes cannot be discussed efficiently due to the lack of a proper determination of nanowaste quantity and characterization. In order to minimize the toxic effects of nanowastes, within an effective and sustainable framework, waste definition and necessary plans and practices need to be applied. In this study, definition, classification and recommendations on disposal of nanowastes are presented taking into account the existing international waste management legislatives.

  13. Cleaning Up Electronic Waste (E-Waste) (United States)

    While accurate data on the amount of e-waste being exported from the U.S. are not available, the United States government is concerned that these exports are being mismanaged abroad, causing serious public health and environmental hazards.

  14. Lean for Government: Eliminating the Seven Wastes (United States)

    Shepherd, Christena C.


    With shrinking budgets and a slow economy, it is becoming increasingly important for all government agencies to become more efficient. Citizens expect and deserve efficient and effective services from federal, state and local government agencies. One of the best methods to improve efficiency and eliminate waste is to institute the business process improvement methodologies known collectively as Lean; however, with reduced budgets, it may not be possible to train everyone in Lean or to engage the services of a trained consultant. It is possible, however, to raise awareness of the "Seven Wastes" of Lean in each employee, and encourage them to identify areas for improvement. Management commitment is vital to the success of these initiatives, and it is also important to develop the right metrics that will track the success of these changes.

  15. Alternate Double Single Track Lines

    Energy Technology Data Exchange (ETDEWEB)

    Moraga Contreras, P.; Grande Andrade, Z.; Castillo Ron, E.


    The paper discusses the advantages and shortcomings of alternate double single track (ADST) lines with respect to double track lines for high speed lines. ADST lines consists of sequences of double and single track segments optimally selected in order to reduce the construction and maintenance costs of railway lines and to optimize the timetables used to satisfy a given demand. The single tracks are selected to coincide with expensive segments (tunnels and viaducts) and the double tracks are chosen to coincide with flat areas and only where they are necessary. At the same time, departure times are adjusted for trains to cross at the cheap double track segments. This alternative can be used for new lines and also for existing conventional lines where some new tracks are to be constructed to reduce travel time (increase speed). The ADST proposal is illustrated with some examples of both types (new lines and where conventional lines exist), including the Palencia-Santander, the Santiago-Valparaíso-Viña del Mar and the Dublin-Belfast lines, where very important reductions (90 %) are obtained, especially where a railway infrastructure already exist. (Author)


    Directory of Open Access Journals (Sweden)

    Devinder Kumar


    Full Text Available Tracking occluded objects at different depths has become as extremely important component of study for any video sequence having wide applications in object tracking, scene recognition, coding, editing the videos and mosaicking. The paper studies the ability of annotation to track the occluded object based on pyramids with variation in depth further establishing a threshold at which the ability of the system to track the occluded object fails. Image annotation is applied on 3 similar video sequences varying in depth. In the experiment, one bike occludes the other at a depth of 60cm, 80cm and 100cm respectively. Another experiment is performed on tracking humans with similar depth to authenticate the results. The paper also computes the frame by frame error incurred by the system, supported by detailed simulations. This system can be effectively used to analyze the error in motion tracking and further correcting the error leading to flawless tracking. This can be of great interest to computer scientists while designing surveillance systems etc.

  17. Radioactive wastes and valorizable materials in France: summary of the 2004 national inventory; Dechets radioactifs et matieres valorisables en France: resume de l'inventaire national 2004

    Energy Technology Data Exchange (ETDEWEB)



    The French national inventory of radioactive wastes is a reference document for professionals and scientists of the nuclear domain and also for any citizen interested in the management of radioactive wastes. This summary document contains: 1 - general introduction; 2 - classification of radioactive wastes: the 5 main categories; 3 - origin of the wastes; 4 - processing and conditioning; 5 - inventory of existing wastes: geographical inventory, inventory per category; 6 - prospective inventory: prospective scenarios, forecasting of waste production; 7 - valorizable radioactive materials; 8 - synthesis and perspective; 9 - glossary. (J.S.)

  18. Automated classification and scoring of smooth pursuit eye movements in the presence of fixations and saccades. (United States)

    Komogortsev, Oleg V; Karpov, Alex


    Ternary eye movement classification, which separates fixations, saccades, and smooth pursuit from the raw eye positional data, is extremely challenging. This article develops new and modifies existing eye-tracking algorithms for the purpose of conducting meaningful ternary classification. To this end, a set of qualitative and quantitative behavior scores is introduced to facilitate the assessment of classification performance and to provide means for automated threshold selection. Experimental evaluation of the proposed methods is conducted using eye movement records obtained from 11 subjects at 1000 Hz in response to a step-ramp stimulus eliciting fixations, saccades, and smooth pursuits. Results indicate that a simple hybrid method that incorporates velocity and dispersion thresholding allows producing robust classification performance. It is concluded that behavior scores are able to aid automated threshold selection for the algorithms capable of successful classification.

  19. Track guided self-driven container wagon

    NARCIS (Netherlands)

    Hansen, I.A.


    The linear motor consists of a series of stator coils (2) located along the Track guided self-driven container wagon Track guided self-driven container wagon track and a reaction rail (3) fitted under the wagon chassis (4).

  20. Track inspection planning and risk measurement analysis. (United States)


    This project models track inspection operations on a railroad network and discusses how the inspection results can : be used to measure the risk of failure on the tracks. In particular, the inspection times of the tracks, inspection frequency of the ...

  1. CDC National Environmental Public Health Tracking Network (Tracking Network) (United States)

    U.S. Department of Health & Human Services — The National Environmental Public Health Tracking Network is a system of integrated health, exposure, and hazard information and data from a variety of national,...

  2. Kalman Filter Track Fits and Track Breakpoint Analysis

    CERN Document Server

    Astier, Pierre; Cousins, R D; Letessier-Selvon, A A; Popov, B A; Vinogradova, T G; Astier, Pierre; Cardini, Alessandro; Cousins, Robert D.; Letessier-Selvon, Antoine; Popov, Boris A.; Vinogradova, Tatiana


    We give an overview of track fitting using the Kalman filter method in the NOMAD detector at CERN, and emphasize how the wealth of by-product information can be used to analyze track breakpoints (discontinuities in track parameters caused by scattering, decay, etc.). After reviewing how this information has been previously exploited by others, we describe extensions which add power to breakpoint detection and characterization. We show how complete fits to the entire track, with breakpoint parameters added, can be easily obtained from the information from unbroken fits. Tests inspired by the Fisher F-test can then be used to judge breakpoints. Signed quantities (such as change in momentum at the breakpoint) can supplement unsigned quantities such as the various chisquares. We illustrate the method with electrons from real data, and with Monte Carlo simulations of pion decays.


    Directory of Open Access Journals (Sweden)

    M. I. Mishchenko


    Full Text Available Purpose. The purpose of the article is to develop a one- and two-element model of the fees calculation for the use of track infrastructure of Ukrainian railway transport. Methodology. On the basis of this one can consider that when planning the planned preventive track repair works and the amount of depreciation charges the guiding criterion is not the amount of progress it is the operating life of the track infrastructure facilities. The cost of PPTRW is determined on the basis of the following: the classification track repairs; typical technological processes for track repairs; technology based time standards for PPTRW; costs for the work of people, performing the PPTRW, their hourly wage rates according to the Order 98-Ts; the operating cost of machinery; regulated list; norms of expenditures and costs of materials and products (they have the largest share of the costs for repairs; railway rates; average distances for transportation of materials used during repair; standards of general production expenses and the administrative costs. Findings. The models offered in article allow executing the objective account of expenses in travelling facilities for the purpose of calculation of the proved size of indemnification and necessary size of profit, the sufficient enterprises for effective activity of a travelling infrastructure. Originality. The methodological bases of determination the fees (payments for the use of track infrastructure on one- and two-element base taking into account the experience of railways in the EC countries and the current transport legislation were grounded. Practical value. The article proposes the one- and two-element models of calculating the fees (payments for the TIF use, accounting the applicable requirements of European transport legislation, which provides the expense compensation and income formation, sufficient for economic incentives of the efficient operation of the TIE of Ukrainian railway transport.

  4. Hydrothermal Gasification for Waste to Energy (United States)

    Epps, Brenden; Laser, Mark; Choo, Yeunun


    Hydrothermal gasification is a promising technology for harvesting energy from waste streams. Applications range from straightforward waste-to-energy conversion (e.g. municipal waste processing, industrial waste processing), to water purification (e.g. oil spill cleanup, wastewater treatment), to biofuel energy systems (e.g. using algae as feedstock). Products of the gasification process are electricity, bottled syngas (H2 + CO), sequestered CO2, clean water, and inorganic solids; further chemical reactions can be used to create biofuels such as ethanol and biodiesel. We present a comparison of gasification system architectures, focusing on efficiency and economic performance metrics. Various system architectures are modeled computationally, using a model developed by the coauthors. The physical model tracks the mass of each chemical species, as well as energy conversions and transfers throughout the gasification process. The generic system model includes the feedstock, gasification reactor, heat recovery system, pressure reducing mechanical expanders, and electricity generation system. Sensitivity analysis of system performance to various process parameters is presented. A discussion of the key technological barriers and necessary innovations is also presented.

  5. TSA waste stream and final waste form composition

    Energy Technology Data Exchange (ETDEWEB)

    Grandy, J.D.; Eddy, T.L.; Anderson, G.L.


    A final vitrified waste form composition, based upon the chemical compositions of the input waste streams, is recommended for the transuranic-contaminated waste stored at the Transuranic Storage Area of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. The quantities of waste are large with a considerable uncertainty in the distribution of various waste materials. It is therefore impractical to mix the input waste streams into an ``average`` transuranic-contaminated waste. As a result, waste stream input to a melter could vary widely in composition, with the potential of affecting the composition and properties of the final waste form. This work examines the extent of the variation in the input waste streams, as well as the final waste form under conditions of adding different amounts of soil. Five prominent Rocky Flats Plant 740 waste streams are considered, as well as nonspecial metals and the ``average`` transuranic-contaminated waste streams. The metals waste stream is the most extreme variation and results indicate that if an average of approximately 60 wt% of the mixture is soil, the final waste form will be predominantly silica, alumina, alkaline earth oxides, and iron oxide. This composition will have consistent properties in the final waste form, including high leach resistance, irrespective of the variation in waste stream. For other waste streams, much less or no soil could be required to yield a leach resistant waste form but with varying properties.

  6. Solid Waste Management Plan. Revision 4

    Energy Technology Data Exchange (ETDEWEB)



    The waste types discussed in this Solid Waste Management Plan are Municipal Solid Waste, Hazardous Waste, Low-Level Mixed Waste, Low-Level Radioactive Waste, and Transuranic Waste. The plan describes for each type of solid waste, the existing waste management facilities, the issues, and the assumptions used to develop the current management plan.

  7. Transuranic contaminated waste functional definition and implementation

    Energy Technology Data Exchange (ETDEWEB)

    Kniazewycz, B.G.


    The purpose of this report is to examine the problem(s) of TRU waste classification and to document the development of an easy-to-apply standard(s) to determine whether or not this waste package should be emplaced in a geologic repository for final disposition. Transuranic wastes are especially significant because they have long half-lives and some are rather radiotoxic. Transuranic radionuclides are primarily produced by single or multiple neutron capture by U-238 in fuel elements during the operation of a nuclear reactor. Reprocessing of spent fuel elements attempts to remove plutonium, but since the separation is not complete, the resulting high-activity liquids still contain some plutonium as well as other transuranics. Likewise, transuranic contamination of low-activity wastes also occurs when the transuranic materials are handled or processed, which is primarily at federal facilities involved in R and D and nuclear weapons production. Transuranics are persistent in the environment and, as a general rule, are strongly retained by soils. They are not easily transported through most food chains, although some reconcentration does take place in the aquatic food chain. They pose no special biological hazard to humans upon ingestion because they are weakly absorbed from the gastrointestional tract. A greater hazard results from inhalation since they behave like normal dust and fractionate accordingly.

  8. ATLAS FTK: Fast Track Trigger

    CERN Document Server

    Amerio, S; The ATLAS collaboration; Andreazza, A; Annovi, A; Beretta, M; Bevacqua, V; Bogdan, M; Bossini, E; Boveia, A; Cavaliere, V; Canelli, F; Blazey, G; Cervigni, F; Cheng, Y; Citterio, M; Crescioli, F; Dell’Orso, M; Drake, G; Dunford, M; Giannetti, P; Giorgi, F; Hoff, J; Kapliy, A; Kasten, M; Kim, Y K; Kimura, N; Lanza, A; Liberali, V; Liu, T; Magalotti, D; McCarn, A; Melachrinos, C; Meroni, C; Negri, A; Neubauer, M; Penning, B; Piendibene, M; Proudfoot, J; Riva, M; Roda, C; Sabatini, F; Sacco, I; Shochet, M; Stabile, A; Tang, F; Tang, J; Tripiccione, R; Tuggle, J; Vercesi, V; Verzocchi, M; Villa, M; Vitillo, R A; Volpi, G; Webster, J; Wu, J; Yorita, K; Zhang, J


    A track reconstruction system for the trigger of the ATLAS detector at the Large Hadron Collider is described. The Fast Tracker is a highly parallel hardware system designed to operate at the Level-1 trigger output rate. It will provide high-quality tracks reconstructed over the entire inner detector by the start of processing in the Level-2 trigger. The system is based on associative memories for pattern recognition and fast FPGA’s for track reconstruction. Its design and expected performance under instantaneous luminosities up to 3 × 10^34/cm^2/s are discussed.

  9. [Fast-track hip arthroplasty]. (United States)

    Hansen, Torben Bæk; Gromov, Kirill; Kristensen, Billy B; Husted, Henrik; Kehlet, Henrik


    Fast-track surgery implies a coordinated perioperative approach aimed at reducing surgical stress and facilitating post-operative recovery. The fast-track programme has reduced post-operative length of stay and has led to shorter convalescence with more rapid functional recovery and decreased morbidity and mortality in total hip arthroplasty. It should now be a standard total hip arthroplasty patient pathway, but fine tuning of the multiple factors in the fast-track pathway is still needed in patients with special needs or high comorbidity burden.

  10. Sun tracking systems: a review. (United States)

    Lee, Chia-Yen; Chou, Po-Cheng; Chiang, Che-Ming; Lin, Chiu-Feng


    The output power produced by high-concentration solar thermal and photovoltaic systems is directly related to the amount of solar energy acquired by the system, and it is therefore necessary to track the sun's position with a high degree of accuracy. Many systems have been proposed to facilitate this task over the past 20 years. Accordingly, this paper commences by providing a high level overview of the sun tracking system field and then describes some of the more significant proposals for closed-loop and open-loop types of sun tracking systems.

  11. Sun Tracking Systems: A Review

    Directory of Open Access Journals (Sweden)

    Chiu-Feng Lin


    Full Text Available The output power produced by high-concentration solar thermal and photovoltaic systems is directly related to the amount of solar energy acquired by the system, and it is therefore necessary to track the sun’s position with a high degree of accuracy. Many systems have been proposed to facilitate this task over the past 20 years. Accordingly, this paper commences by providing a high level overview of the sun tracking system field and then describes some of the more significant proposals for closed-loop and open-loop types of sun tracking systems.

  12. Tracks: A National Environmental Public Health Tracking Network Overview

    Centers for Disease Control (CDC) Podcasts


    In this podcast, Dr. Mike McGeehin, Director of CDC's Division of Environmental Hazards and Health Effects, provides an overview of the National Environmental Public Health Tracking Network. It highlights the Tracking Network's goal, how it will improve public health, its audience, and much more.  Created: 8/4/2009 by Centers for Disease Control and Prevention (CDC).   Date Released: 8/4/2009.

  13. Classification in Medical Imaging

    DEFF Research Database (Denmark)

    Chen, Chen

    to segment breast tissue and pectoral muscle area from the background in mammogram. The second focus is the choices of metric and its influence to the feasibility of a classifier, especially on k-nearest neighbors (k-NN) algorithm, with medical applications on breast cancer prediction and calcification...... and explores these challenging areas. The first focus of the thesis is to properly combine different local feature experts and prior information to design an effective classifier. The preliminary classification results, provided by the experts, are fused in order to develop an automatic segmentation method...

  14. Constructing criticality by classification

    DEFF Research Database (Denmark)

    Machacek, Erika


    This paper explores the role of expertise, the nature of criticality, and their relationship to securitisation as mineral raw materials are classified. It works with the construction of risk along the liberal logic of security to explore how "key materials" are turned into "critical materials......" in the bureaucratic practice of classification: Experts construct material criticality in assessments as they allot information on the materials to the parameters of the assessment framework. In so doing, they ascribe a new set of connotations to the materials, namely supply risk, and their importance to clean energy...


    Directory of Open Access Journals (Sweden)

    I. P. Prokopenko


    Full Text Available Correctly organized nutritive and pharmacological support is an important component of an athlete's preparation for competitions, an optimal shape maintenance, fast recovery and rehabilitation after traumas and defatigation. Special products of enhanced biological value (BAS for athletes nutrition are used with this purpose. Easy-to-use energy sources are administered into athlete's organism, yielded materials and biologically active substances which regulate and activate exchange reactions which proceed with difficulties during certain physical trainings. The article presents sport supplements classification which can be used before warm-up and trainings, after trainings and in competitions breaks.

  16. Environmental exposure tracking sensor (United States)

    Havens, Teresa; Everhart, Joel; McFerran, Jace


    Cornerstone Research Group Inc. (CRG) has developed environmental exposure tracking (EET) sensors using shape memory polymer (SMP) to monitor the degradation of perishable items, such as munitions, medicines or foods, by measuring the cumulative exposure to temperature and moisture. SMPs are polymers whose qualities have been altered to give them dynamic shape "memory" properties. Under thermal or moisture stimuli, SMP exhibits a radical change from a rigid thermoset to a highly flexible, elastic state. The dynamic response of the SMP can be tailored to match the degradation profile of the perishable item. SMP-based EET sensors require no digital memory or internal power supply and provide the capability of inexpensive, long-term life cycle monitoring thermal and moisture exposure over time. In a Phase I and II SBIR effort with the Navy, CRG demonstrated the feasibility of SMP-based EET sensor with two material systems. These material systems required different activation stimuli, heat or water vapor pressure. CRG developed the ability to tailor these materials to customize the dynamic response to match various degradation profiles of munitions. CRG optimized and characterized the SMP formulations and sensor design configuration to develop a suite of data from which any degradation profile can be met. CRG's EET sensors are capable of monitoring temperatures from -30 °C to 260 °C. The prototypes monitor cumulative thermal exposure and provide real-time information in a visually readable or a remotely interrogated version. CRG is currently scaling up the manufacture of the sensors for munitions reliability applications with the Navy.

  17. Studies on implementation of pellet tracking in hadron physics experiments

    Directory of Open Access Journals (Sweden)

    Pyszniak A.


    Full Text Available A system for optical tracking of frozen hydrogen microsphere targets (pellets has been designed. It is intended for the upcoming hadron physics experiment PANDA at FAIR, Darmstadt, Germany. With such a tracking system one can reconstruct the positions of the individual pellets at the time of a hadronic interaction in the offline event analysis. This gives information on the position of the primary interaction vertex with an accuracy of a few 100 µm, which is very useful e.g. for reconstruction of charged particle tracks and secondary vertices and for background suppression. A study has been done at the WASA detector setup (Forschungszentrum Jülich, Germany to check the possibility of classification of hadronic events as originating in pellets or in background. The study has been done based on the instantaneous rate a Long Range TDC which was used to determine if a pellet was present in the accelerator beam region. It was clearly shown that it is possible to distinguish the two event classes. Also, an experience was gained with operation of two synchronized systems operating in different time scales, as it will also be the case with the optical pellet tracking.

  18. Waste statistics 2004

    Energy Technology Data Exchange (ETDEWEB)



    The 2004 reporting to the ISAG comprises 394 plants owned by 256 enterprises. In 2003, reports covered 403 plants owned by 273 enterprises. Waste generation in 2004 is compared to targets for 2008 in the government's Waste Strategy 2005-2008. The following summarises waste generation in 2004: 1) In 2004, total reported waste arisings amounted to 13,359,000 tonnes, which is 745,000 tonnes, or 6 per cent, more than in 2003. 2) If amounts of residues from coal-fired power plants are excluded from statistics, waste arisings in 2004 were 12,179,000 tonnes, which is a 9 per cent increase from 2003. 3) If amounts of residues from coal-fired power plants and waste from the building and construction sector are excluded from statistics, total waste generation in 2004 amounted to 7,684,000 tonnes, which is 328,000 tonnes, or 4 per cent, more than in 2002. In other words, there has been an increase in total waste arisings, if residues and waste from building and construction are excluded. Waste from the building and construction sector is more sensitive to economic change than most other waste. 4) The total rate of recycling was 65 per cent. The 2008 target for recycling is 65 per cent. The rate of recycling in 2003 was also 65 per cent. 5) The total amount of waste led to incineration amounted to 26 per cent, plus an additional 1 per cent left in temporary storage to be incinerated at a later time. The 2008 target for incineration is 26 per cent. These are the same percentage figures as applied to incineration and storage in 2003. 6) The total amount of waste led to landfills amounted to 8 per cent, which is one percentage point better than the overall landfill target of a maximum of 9 per cent landfilling in 2008. Also in 2003, 8 per cent of the waste was landfilled. 7) The targets for treatment of waste from individual sectors are still not being met: too little waste from households and the service sector is being recycled, and too much waste from industry is being

  19. Track-to-track association for object matching in an inter-vehicle communication system (United States)

    Yuan, Ting; Roth, Tobias; Chen, Qi; Breu, Jakob; Bogdanovic, Miro; Weiss, Christian A.


    Autonomous driving poses unique challenges for vehicle environment perception due to the complex driving environment the autonomous vehicle finds itself in and differentiates from remote vehicles. Due to inherent uncertainty of the traffic environments and incomplete knowledge due to sensor limitation, an autonomous driving system using only local onboard sensor information is generally not sufficiently enough for conducting a reliable intelligent driving with guaranteed safety. In order to overcome limitations of the local (host) vehicle sensing system and to increase the likelihood of correct detections and classifications, collaborative information from cooperative remote vehicles could substantially facilitate effectiveness of vehicle decision making process. Dedicated Short Range Communication (DSRC) system provides a powerful inter-vehicle wireless communication channel to enhance host vehicle environment perceiving capability with the aid of transmitted information from remote vehicles. However, there is a major challenge before one can fuse the DSRC-transmitted remote information and host vehicle Radar-observed information (in the present case): the remote DRSC data must be correctly associated with the corresponding onboard Radar data; namely, an object matching problem. Direct raw data association (i.e., measurement-to-measurement association - M2MA) is straightforward but error-prone, due to inherent uncertain nature of the observation data. The uncertainties could lead to serious difficulty in matching decision, especially, using non-stationary data. In this study, we present an object matching algorithm based on track-to-track association (T2TA) and evaluate the proposed approach with prototype vehicles in real traffic scenarios. To fully exploit potential of the DSRC system, only GPS position data from remote vehicle are used in fusion center (at host vehicle), i.e., we try to get what we need from the least amount of information; additional feature

  20. Classification of smooth Fano polytopes

    DEFF Research Database (Denmark)

    Øbro, Mikkel

    A simplicial lattice polytope containing the origin in the interior is called a smooth Fano polytope, if the vertices of every facet is a basis of the lattice. The study of smooth Fano polytopes is motivated by their connection to toric varieties. The thesis concerns the classification of smooth...... Fano polytopes up to isomorphism. A smooth Fano -polytope can have at most vertices. In case of vertices an explicit classification is known. The thesis contains the classification in case of vertices. Classifications of smooth Fano -polytopes for fixed exist only for . In the thesis an algorithm...... for the classification of smooth Fano -polytopes for any given is presented. The algorithm has been implemented and used to obtain the complete classification for ....

  1. Cluster Based Text Classification Model

    DEFF Research Database (Denmark)

    Nizamani, Sarwat; Memon, Nasrullah; Wiil, Uffe Kock


    We propose a cluster based classification model for suspicious email detection and other text classification tasks. The text classification tasks comprise many training examples that require a complex classification model. Using clusters for classification makes the model simpler and increases...... the accuracy at the same time. The test example is classified using simpler and smaller model. The training examples in a particular cluster share the common vocabulary. At the time of clustering, we do not take into account the labels of the training examples. After the clusters have been created......, the classifier is trained on each cluster having reduced dimensionality and less number of examples. The experimental results show that the proposed model outperforms the existing classification models for the task of suspicious email detection and topic categorization on the Reuters-21578 and 20 Newsgroups...

  2. Small-scale classification schemes

    DEFF Research Database (Denmark)

    Hertzum, Morten


    Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements classificat....... This difference between the written requirements specification and the oral discussions at the meetings may help explain software engineers’ general preference for people, rather than documents, as their information sources.......Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements....... While coordination mechanisms focus on how classification schemes enable cooperation among people pursuing a common goal, boundary objects embrace the implicit consequences of classification schemes in situations involving conflicting goals. Moreover, the requirements specification focused on functional...

  3. Ceramics in nuclear waste management

    Energy Technology Data Exchange (ETDEWEB)

    Chikalla, T D; Mendel, J E [eds.


    Seventy-three papers are included, arranged under the following section headings: national programs for the disposal of radioactive wastes, waste from stability and characterization, glass processing, ceramic processing, ceramic and glass processing, leaching of waste materials, properties of nuclear waste forms, and immobilization of special radioactive wastes. Separate abstracts were prepared for all the papers. (DLC)

  4. Operational Waste Volume Projection

    Energy Technology Data Exchange (ETDEWEB)

    STRODE, J.N.


    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2018 are projected based on assumption as of July 1999. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement.

  5. Operational waste volume projection

    Energy Technology Data Exchange (ETDEWEB)

    Koreski, G.M.


    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June 1996.

  6. Hyperspectral-Augmented Target Tracking

    National Research Council Canada - National Science Library

    Soliman, Neil A


    ... air with the capability to seek, monitor, and destroy mobile terrorist targets in hostile territory. One such capability recognizes and persistently tracks multiple moving vehicles in complex, highly ambiguous urban environments...

  7. ACED Federal Grant Contractor Tracking (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Dataset includes grant, project, and contractor awarded which are tracked for ensuring Davis-Bacon Act compliance where applicable. The 1931 Davis-Bacon Act...

  8. Dynamic Ocean Track System Plus - (United States)

    Department of Transportation — Dynamic Ocean Track System Plus (DOTS Plus) is a planning tool implemented at the ZOA, ZAN, and ZNY ARTCCs. It is utilized by Traffic Management Unit (TMU) personnel...

  9. Incidental Take Statement (ITS) Tracking (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Incidental Take Statement (ITS) Tracking Spreadsheet was created in 2012 and is updated annually by the NMFS GARFO Protected Resources Division. It is used to...

  10. Birth Defects Research and Tracking (United States)

    ... Network provides the prevalence of these defects and publishes updated data every year. The Tracking Network’s Data ... type="submit" value="Submit" /> Information For… Media Policy Makers File Formats Help: How do I view ...

  11. GARFOGIS_DATA_TRACKING.xlsm (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This spreadsheet is the central tracking document and inventory of "official" GIS datasets in development, published, or archived at the Greater Atlantic Regional...

  12. Odd tracks at hadron colliders. (United States)

    Meade, Patrick; Papucci, Michele; Volansky, Tomer


    New physics that exhibits irregular tracks such as kinks, intermittent hits, or decay in flight may easily be missed at hadron colliders. We demonstrate this by studying viable models of light, O(10  GeV), colored particles that decay predominantly inside the tracker. Such particles can be produced at staggering rates, and yet, may not be identified or triggered on at the LHC, unless specifically searched for. In addition, the models we study provide an explanation for the original measurement of the anomalous charged track distribution by CDF. The presence of irregular tracks in these models reconcile that measurement with the subsequent reanalysis and the null results of ATLAS and CMS. Our study clearly illustrates the need for a comprehensive study of irregular tracks at the LHC.

  13. WRAP low level waste (LLW) glovebox operational test report

    Energy Technology Data Exchange (ETDEWEB)

    Kersten, J.K.


    The Low Level Waste (LLW) Process Gloveboxes are designed to: receive a 55 gallon drum in an 85 gallon overpack in the Entry glovebox (GBIOI); and open and sort the waste from the 55 gallon drum, place the waste back into drum and relid in the Sorting glovebox (GB 102). In addition, waste which requires further examination is transferred to the LLW RWM Glovebox via the Drath and Schraeder Bagiess Transfer Port (DO-07-201) or sent to the Sample Transfer Port (STC); crush the drum in the Supercompactor glovebox (GB 104); place the resulting puck (along with other pucks) into another 85 gallon overpack in the Exit glovebox (GB 105). The status of the waste items is tracked by the Data Management System (DMS) via the Plant Control System (PCS) barcode interface. As an item is moved from the entry glovebox to the exit glovebox, the Operator will track an items location using a barcode reader and enter any required data on the DMS console. The Operational Test Procedure (OTP) will perform evolution`s (described below) using the Plant Operating Procedures (POP) in order to verify that they are sufficient and accurate for controlled glovebox operation.

  14. Kalman Orbit Optimized Loop Tracking (United States)

    Young, Lawrence E.; Meehan, Thomas K.


    Under certain conditions of low signal power and/or high noise, there is insufficient signal to noise ratio (SNR) to close tracking loops with individual signals on orbiting Global Navigation Satellite System (GNSS) receivers. In addition, the processing power available from flight computers is not great enough to implement a conventional ultra-tight coupling tracking loop. This work provides a method to track GNSS signals at very low SNR without the penalty of requiring very high processor throughput to calculate the loop parameters. The Kalman Orbit-Optimized Loop (KOOL) tracking approach constitutes a filter with a dynamic model and using the aggregate of information from all tracked GNSS signals to close the tracking loop for each signal. For applications where there is not a good dynamic model, such as very low orbits where atmospheric drag models may not be adequate to achieve the required accuracy, aiding from an IMU (inertial measurement unit) or other sensor will be added. The KOOL approach is based on research JPL has done to allow signal recovery from weak and scintillating signals observed during the use of GPS signals for limb sounding of the Earth s atmosphere. That approach uses the onboard PVT (position, velocity, time) solution to generate predictions for the range, range rate, and acceleration of the low-SNR signal. The low- SNR signal data are captured by a directed open loop. KOOL builds on the previous open loop tracking by including feedback and observable generation from the weak-signal channels so that the MSR receiver will continue to track and provide PVT, range, and Doppler data, even when all channels have low SNR.


    Energy Technology Data Exchange (ETDEWEB)

    D.C. Weddle; R. Novotny; J. Cron


    The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

  16. On Value and Waste


    Wallström, Peter


    Value and waste are concepts that are used in improvement projects. In lean the concepts are fairly simple. Reduce the waste and the value has increased. However, value is both multidimensional and differs over time. If the concepts value and waste are to be used, the concepts must be clearly defined and measured. Otherwise, value can be reduced for the customer/user and the cost increased for the producer/seller. The purpose in this thesis is to investigate how value and waste are perceived ...

  17. Disposal of radioactive waste (United States)

    Van Dorp, Frits; Grogan, Helen; McCombie, Charles

    The aim of radioactive and non-radioactive waste management is to protect man and the environment from unacceptable risks. Protection criteria for both should therefore be based on similar considerations. From overall protection criteria, performance criteria for subsystems in waste management can be derived, for example for waste disposal. International developments in this field are summarized. A brief overview of radioactive waste sorts and disposal concepts is given. Currently being implemented are trench disposal and engineered near-surface facilities for low-level wastes. For low-and intermediate-level waste underground facilities are under construction. For high-level waste site selection and investigation is being carried out in several countries. In all countries with nuclear programmes, the predicted performance of waste disposal systems is being assessed in scenario and consequence analyses. The influences of variability and uncertainty of parameter values are increasingly being treated by probabilistic methods. Results of selected performance assessments show that radioactive waste disposal sites can be found and suitable repositories can be designed so that defined radioprotection limits are not exceeded.

  18. Avoidable waste management costs

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, K.; Burns, M.; Priebe, S.; Robinson, P.


    This report describes the activity based costing method used to acquire variable (volume dependent or avoidable) waste management cost data for routine operations at Department of Energy (DOE) facilities. Waste volumes from environmental restoration, facility stabilization activities, and legacy waste were specifically excluded from this effort. A core team consisting of Idaho National Engineering Laboratory, Los Alamos National Laboratory, Rocky Flats Environmental Technology Site, and Oak Ridge Reservation developed and piloted the methodology, which can be used to determine avoidable waste management costs. The method developed to gather information was based on activity based costing, which is a common industrial engineering technique. Sites submitted separate flow diagrams that showed the progression of work from activity to activity for each waste type or treatability group. Each activity on a flow diagram was described in a narrative, which detailed the scope of the activity. Labor and material costs based on a unit quantity of waste being processed were then summed to generate a total cost for that flow diagram. Cross-complex values were calculated by determining a weighted average for each waste type or treatability group based on the volume generated. This study will provide DOE and contractors with a better understanding of waste management processes and their associated costs. Other potential benefits include providing cost data for sites to perform consistent cost/benefit analysis of waste minimization and pollution prevention (WMIN/PP) options identified during pollution prevention opportunity assessments and providing a means for prioritizing and allocating limited resources for WMIN/PP.

  19. Concrete and cement composites used for radioactive waste deposition. (United States)

    Koťátková, Jaroslava; Zatloukal, Jan; Reiterman, Pavel; Kolář, Karel


    This review article presents the current state-of-knowledge of the use of cementitious materials for radioactive waste disposal. An overview of radwaste management processes with respect to the classification of the waste type is given. The application of cementitious materials for waste disposal is divided into two main lines: i) as a matrix for direct immobilization of treated waste form; and ii) as an engineered barrier of secondary protection in the form of concrete or grout. In the first part the immobilization mechanisms of the waste by cement hydration products is briefly described and an up-to date knowledge about the performance of different cementitious materials is given, including both traditional cements and alternative binder systems. The advantages, disadvantages as well as gaps in the base of information in relation to individual materials are stated. The following part of the article is aimed at description of multi-barrier systems for intermediate level waste repositories. It provides examples of proposed concepts by countries with advanced waste management programmes. In the paper summary, the good knowledge of the material durability due to its vast experience from civil engineering is highlighted however with the urge for specific approach during design and construction of a repository in terms of stringent safety requirements. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Reliability of Oronasal Fistula Classification. (United States)

    Sitzman, Thomas J; Allori, Alexander C; Matic, Damir B; Beals, Stephen P; Fisher, David M; Samson, Thomas D; Marcus, Jeffrey R; Tse, Raymond W


    Objective Oronasal fistula is an important complication of cleft palate repair that is frequently used to evaluate surgical quality, yet reliability of fistula classification has never been examined. The objective of this study was to determine the reliability of oronasal fistula classification both within individual surgeons and between multiple surgeons. Design Using intraoral photographs of children with repaired cleft palate, surgeons rated the location of palatal fistulae using the Pittsburgh Fistula Classification System. Intrarater and interrater reliability scores were calculated for each region of the palate. Participants Eight cleft surgeons rated photographs obtained from 29 children. Results Within individual surgeons reliability for each region of the Pittsburgh classification ranged from moderate to almost perfect (κ = .60-.96). By contrast, reliability between surgeons was lower, ranging from fair to substantial (κ = .23-.70). Between-surgeon reliability was lowest for the junction of the soft and hard palates (κ = .23). Within-surgeon and between-surgeon reliability were almost perfect for the more general classification of fistula in the secondary palate (κ = .95 and κ = .83, respectively). Conclusions This is the first reliability study of fistula classification. We show that the Pittsburgh Fistula Classification System is reliable when used by an individual surgeon, but less reliable when used among multiple surgeons. Comparisons of fistula occurrence among surgeons may be subject to less bias if they use the more general classification of "presence or absence of fistula of the secondary palate" rather than the Pittsburgh Fistula Classification System.

  1. Secondary Waste Cast Stone Waste Form Qualification Testing Plan

    Energy Technology Data Exchange (ETDEWEB)

    Westsik, Joseph H.; Serne, R. Jeffrey


    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

  2. Household Hazardous Waste and Demolition (United States)

    Household wastes that are toxic, corrosive, ignitable, or reactive are known as Household Hazardous Waste (HHW). Household Hazardous Waste may be found during residential demolitions, and thus require special handling for disposal.

  3. Waste management and the workplace*

    African Journals Online (AJOL)


    . 48 For instance, the City's Solid Waste Department argues that specialised, expensive recycling equipment is required at drop-off centres to recycle garden waste and building rubble. Also, the compactor trucks used for waste collection are ...

  4. Status of inventory, recycling, and storage of hazardous waste in Kazakstan

    Energy Technology Data Exchange (ETDEWEB)

    Yermekbayeva, L. [Ministry of Ecology and Bioresources, Almaty (Kazakhstan)


    Conditions associated with toxic and radioactive waste in the Republic of Kazakstan are discussed. At present, more than 19 billion tons of various wastes, including toxic, radioactive, and other hazardous waste, have accumulated in the country, and about 1 billion tons of waste are generated each year. Ecological legislation for toxic waste storage is being examined. However, the definition and classification of waste inventories are not finalized. Furthermore, the country does not have sites for salvaging, rendering harmless, or disposing of these wastes. Kazakstan also has problems with radioactive waste that are complicated by the activity at the Semipalatinsk nuclear testing site. Here, nuclear explosions occurred because of economic and other reasons. In ecologically challenged regions, high levels of pollutants from chemical, toxic, industrial, and radioactive wastes and pesticides cause many diseases. These complex problems may be resolved by establishing a Governmental body to manage industrial and consumer waste, including toxic and radioactive waste, and also by developing legal and other regulations. 3 tabs.

  5. Track based alignment of the ATLAS Inner Detector tracking system

    CERN Document Server

    Romero, E; The ATLAS collaboration


    ATLAS   is   a   multipurpose   experiment   that   records   the   LHC   collisions.   In   order   to   reconstruct   trajectories   of   charged   particle,   ATLAS   is   equipped   with   a   tracking   system   built   using   different   technologies,   silicon   planar   sensors   (pixel   and   microstrips)   and   drift-­‐tube   detectors.   In   order   to   achieve  its  scientific  goals,  the  ATLAS  tracking  system  requires  to  determine  accurately  its  almost   700,000   degrees   of   freedom.   The   demanded   precision   for   the   alignment   of   the   silicon   sensors   is   below   10   micrometers.   This   implies   to   use   a   large   sample   of   high   momentum   and   isolated   tracks.   The   high   level   trigger   selects   and   stores   those   tracks   in   a   calibration   stream.   Tracks   from   cosmic   trigger   during   empty   LHC   bunches   a...

  6. Classification of extraterrestrial civilizations (United States)

    Tang, Tong B.; Chang, Grace


    A scheme of classification of extraterrestrial intelligence (ETI) communities based on the scope of energy accessible to the civilization in question is proposed as an alternative to the Kardeshev (1964) scheme that includes three types of civilization, as determined by their levels of energy expenditure. The proposed scheme includes six classes: (1) a civilization that runs essentially on energy exerted by individual beings or by domesticated lower life forms, (2) harnessing of natural sources on planetary surface with artificial constructions, like water wheels and wind sails, (3) energy from fossils and fissionable isotopes, mined beneath the planet surface, (4) exploitation of nuclear fusion on a large scale, whether on the planet, in space, or from primary solar energy, (5) extensive use of antimatter for energy storage, and (6) energy from spacetime, perhaps via the action of naked singularities.

  7. Automatic diabetic retinopathy classification (United States)

    Bravo, María. A.; Arbeláez, Pablo A.


    Diabetic retinopathy (DR) is a disease in which the retina is damaged due to augmentation in the blood pressure of small vessels. DR is the major cause of blindness for diabetics. It has been shown that early diagnosis can play a major role in prevention of visual loss and blindness. This work proposes a computer based approach for the detection of DR in back-of-the-eye images based on the use of convolutional neural networks (CNNs). Our CNN uses deep architectures to classify Back-of-the-eye Retinal Photographs (BRP) in 5 stages of DR. Our method combines several preprocessing images of BRP to obtain an ACA score of 50.5%. Furthermore, we explore subproblems by training a larger CNN of our main classification task.

  8. Nursing interventions classification (NIC). (United States)

    Bulechek, G M; McCloskey, J C


    The Nursing Interventions Classification (NIC) is the first comprehensive classification of treatments that nurses perform. It is a standardized language of both nurse-initiated and physician-initiated nursing treatments. An alphabetical listing of 336 interventions was published in a book in May 1992 [Iowa Intervention Project, McCloskey, J. C., & Bulechek, G. M. (eds). Nursing Interventions Classification (NIC). St. Louis: Mosby-Year Book]. Each NIC intervention is composed of a label, a definition, a set of activities that a nurse does to carry out the intervention, and a short list of background readings. NIC interventions include: the physiological (e.g., Acid-Base Management, Airway Suctioning, Pressure Ulcer Care) and the psychosocial (e.g., Anxiety Reduction, Preparatory Sensory Information, Home Maintenance Assistance); illness treatment (e.g., Hyperglycemia Management, Ostomy Care, Shock Management), illness prevention (e.g., Fall Prevention, Infection Protection, Immunization/Vaccination Administration), and health promotion (e.g., Exercise Promotion, Nutrition Management, Smoking Cessation Assistance); and those used for individuals and those for families (e.g., Family Integrity Promotion, Family Support). Most recently, indirect care interventions (e.g., Emergency Cart Checking, Supply Management) have been developed. Research methods used to develop the classification include content analysis, expert survey, focus group review, similarity analysis, and hierarchical cluster analysis. The research, conducted by a large team of investigators at the University of Iowa and supported by the National Institute of Nursing Research, is ongoing. Since the 1992 publication, approximately 50 additional interventions have been developed, a taxonomic structure has been constructed and validated, a feedback and review system has been established and implemented, NIC interventions have been linked to nursing diagnoses, and five clinical agencies are serving as field

  9. Nonlinear estimation and classification

    CERN Document Server

    Hansen, Mark; Holmes, Christopher; Mallick, Bani; Yu, Bin


    Researchers in many disciplines face the formidable task of analyzing massive amounts of high-dimensional and highly-structured data This is due in part to recent advances in data collection and computing technologies As a result, fundamental statistical research is being undertaken in a variety of different fields Driven by the complexity of these new problems, and fueled by the explosion of available computer power, highly adaptive, non-linear procedures are now essential components of modern "data analysis," a term that we liberally interpret to include speech and pattern recognition, classification, data compression and signal processing The development of new, flexible methods combines advances from many sources, including approximation theory, numerical analysis, machine learning, signal processing and statistics The proposed workshop intends to bring together eminent experts from these fields in order to exchange ideas and forge directions for the future

  10. Robotic Rock Classification (United States)

    Hebert, Martial


    This report describes a three-month research program undertook jointly by the Robotics Institute at Carnegie Mellon University and Ames Research Center as part of the Ames' Joint Research Initiative (JRI.) The work was conducted at the Ames Research Center by Mr. Liam Pedersen, a graduate student in the CMU Ph.D. program in Robotics under the supervision Dr. Ted Roush at the Space Science Division of the Ames Research Center from May 15 1999 to August 15, 1999. Dr. Martial Hebert is Mr. Pedersen's research adviser at CMU and is Principal Investigator of this Grant. The goal of this project is to investigate and implement methods suitable for a robotic rover to autonomously identify rocks and minerals in its vicinity, and to statistically characterize the local geological environment. Although primary sensors for these tasks are a reflection spectrometer and color camera, the goal is to create a framework under which data from multiple sensors, and multiple readings on the same object, can be combined in a principled manner. Furthermore, it is envisioned that knowledge of the local area, either a priori or gathered by the robot, will be used to improve classification accuracy. The key results obtained during this project are: The continuation of the development of a rock classifier; development of theoretical statistical methods; development of methods for evaluating and selecting sensors; and experimentation with data mining techniques on the Ames spectral library. The results of this work are being applied at CMU, in particular in the context of the Winter 99 Antarctica expedition in which the classification techniques will be used on the Nomad robot. Conversely, the software developed based on those techniques will continue to be made available to NASA Ames and the data collected from the Nomad experiments will also be made available.

  11. Waste to energy

    CERN Document Server

    Syngellakis, S


    Waste to Energy deals with the very topical subject of converting the calorific content of waste material into useful forms of energy. Topics included cover: Biochemical Processes; Conversions by Thermochemical Processes; Computational Fluid Dynamics Modelling; Combustion; Pyrolysis; Gasification; Biofuels; Management and Policies.

  12. Radioactive waste storage issues

    Energy Technology Data Exchange (ETDEWEB)

    Kunz, Daniel E. [Colorado Christian Univ., Lakewood, CO (United States)


    In the United States we generate greater than 500 million tons of toxic waste per year which pose a threat to human health and the environment. Some of the most toxic of these wastes are those that are radioactively contaminated. This thesis explores the need for permanent disposal facilities to isolate radioactive waste materials that are being stored temporarily, and therefore potentially unsafely, at generating facilities. Because of current controversies involving the interstate transfer of toxic waste, more states are restricting the flow of wastes into - their borders with the resultant outcome of requiring the management (storage and disposal) of wastes generated solely within a state`s boundary to remain there. The purpose of this project is to study nuclear waste storage issues and public perceptions of this important matter. Temporary storage at generating facilities is a cause for safety concerns and underscores, the need for the opening of permanent disposal sites. Political controversies and public concern are forcing states to look within their own borders to find solutions to this difficult problem. Permanent disposal or retrievable storage for radioactive waste may become a necessity in the near future in Colorado. Suitable areas that could support - a nuclear storage/disposal site need to be explored to make certain the health, safety and environment of our citizens now, and that of future generations, will be protected.

  13. Food-Processing Wastes. (United States)

    Frenkel, Val S; Cummings, Gregg A; Maillacheruvu, K Y; Tang, Walter Z


    Literature published in 2016 and early 2017 related to food processing wastes treatment for industrial applications are reviewed. This review is a subsection of the Treatment Systems section of the annual Water Environment Federation literature review and covers the following food processing industries and applications: general, meat and poultry, fruits and vegetables, dairy and beverage, and miscellaneous treatment of food wastes.

  14. Nuclear waste solutions (United States)

    Walker, Darrel D.; Ebra, Martha A.


    High efficiency removal of technetium values from a nuclear waste stream is achieved by addition to the waste stream of a precipitant contributing tetraphenylphosphonium cation, such that a substantial portion of the technetium values are precipitated as an insoluble pertechnetate salt.

  15. Waste statistics 2001

    Energy Technology Data Exchange (ETDEWEB)



    Reports to the ISAG (Information System for Waste and Recycling) for 2001 cover 402 Danish waste treatment plants owned by 295 enterprises. The total waste generation in 2001 amounted to 12,768,000 tonnes, which is 2% less than in 2000. Reductions are primarily due to the fact that sludge for mineralization is included with a dry matter content of 20% compared to 1,5% in previous statistics. This means that sludge amounts have been reduced by 808,886 tonnes. The overall rate of recycling amounted to 63%, which is 1% less than the overall recycling target of 64% for 2004. Since sludge has a high recycling rate, the reduction in sludge amounts of 808,886 tonnes has also caused the total recycling rate to fall. Waste amounts incinerated accounted for 25%, which is 1% more than the overall target of 24% for incineration in 2004. Waste going to landfill amounted to 10%, which is better than the overall landfill target for 2004 of a maximum of 12% for landfilling. Targets for treatment of waste from the different sectors, however, are still not complied with, since too little waste from households and the service sector is recycled, and too much waste from industry is led to landfill. (BA)

  16. Greening waste management

    CSIR Research Space (South Africa)

    Godfrey, Linda K


    Full Text Available The Waste Sector, as with many sectors of the economy, is responding to the call to transition to a Green Economy. Globally, waste management is changing from one of ‘collect-transport-dispose’, to one of ‘secondary resource management’, driven...

  17. Radioactive waste disposal package (United States)

    Lampe, Robert F.


    A radioactive waste disposal package comprising a canister for containing vitrified radioactive waste material and a sealed outer shell encapsulating the canister. A solid block of filler material is supported in said shell and convertible into a liquid state for flow into the space between the canister and outer shell and subsequently hardened to form a solid, impervious layer occupying such space.

  18. Lyophilization -Solid Waste Treatment (United States)

    Litwiller, Eric; Flynn, Michael; Fisher, John; Reinhard, Martin


    This paper discusses the development of a solid waste treatment system that has been designed for a Mars transit exploration mission. The technology described is an energy-efficient lyophilization technique that is designed to recover water from spacecraft solid wastes. Candidate wastes include feces, concentrated brines from water processors, and other solid wastes that contain free water. The system is designed to operate as a stand-alone process or to be integrated into the International Space Station Waste Collection System. In the lyophilization process, water in an aqueous waste is frozen and then sublimed, separating the waste into a dried solid material and liquid water. The sublimed water is then condensed in a solid ice phase and then melted to generate a liquid product. In the subject system the waste solids are contained within a 0.2 micron bio-guard bag and after drying are removed from the system and stored in a secondary container. This technology is ideally suited to applications such as the Mars Reference Mission, where water recovery rates approaching 100% are desirable but production of CO2 is not. The system is designed to minimize power consumption through the use of thermoelectric heat pumps. The results of preliminary testing of a prototype system and testing of the final configuration are provided. A mathematical model of the system is also described.

  19. Solid-Waste Management (United States)

    Science Teacher, 1973


    Consists of excerpts from a forthcoming publication of the United States Environmental Protection Agency, Student's Guide to Solid-Waste Management.'' Discusses the sources of wastes from farms, mines, factories, and communities, the job of governments, ways to collect trash, methods of disposal, processing, and suggests possible student action.…


    Directory of Open Access Journals (Sweden)

    Borut Kosec


    Full Text Available Waste management in foundries is gaining a higher ecological and economical importance. Waste is becoming an increasingly traded product, where excellent profits can be made. Due to the cost reduction and successful business operation in companies, waste has to be regenerated and used again as a material to the maximum possible extent. Such research is long lasting and expensive and is a great challenge for companies. In the frame of our research, a total waste management case study for the Slovenian foundry Feniks was carried out. From the sustainable development point of view, waste management is most suitable, since it ensures the material utilization of waste, reduces the consumption of natural renewable or non-renewable resources and makes efficient production capacity utilization possible. Properly treated ecologically safe waste with a suitable physical characteristic, long-term existence, is a substitute for natural materials. Sand, dust, slag and other mineral waste from foundries are increasingly being used as materials in other industries. The foundry Feniks was awarded with certification of the environmental management system according to the standard SIST EN ISO 14001 and confirmed its environmental credentials.