WorldWideScience

Sample records for warrant additional study

  1. Do perfume additives termed human pheromones warrant being termed pheromones?

    Science.gov (United States)

    Winman, Anders

    2004-09-30

    Two studies of the effects of perfume additives, termed human pheromones by the authors, have conveyed the message that these substances can promote an increase in human sociosexual behaviour [Physiol. Behav. 75 (2003) R1; Arch. Sex. Behav. 27 (1998) R2]. The present paper presents an extended analysis of this data. It is shown that in neither study is there a statistically significant increase in any of the sociosexual behaviours for the experimental groups. In the control groups of both studies, there are, however, moderate but statistically significant decreases in the corresponding behaviour. Most notably, there is no support in data for the claim that the substances increase the attractiveness of the wearers of the substances to the other sex. It is concluded that more research using matched homogenous groups of participants is needed. Copyright 2004 Elsevier Inc.

  2. Predictors for the development of referral-warranted retinopathy of prematurity in the telemedicine approaches to evaluating acute-phase retinopathy of prematurity (e-ROP) study.

    Science.gov (United States)

    Ying, Gui-Shuang; Quinn, Graham E; Wade, Kelly C; Repka, Michael X; Baumritter, Agnieshka; Daniel, Ebenezer

    2015-03-01

    Detection of treatment-requiring retinopathy of prematurity (ROP) involves serial eye examinations. An ROP prediction model using predictive factors could identify high-risk infants and reduce required eye examinations. To determine predictive factors for the development of referral-warranted (RW) ROP. This multicenter observational cohort study included secondary analysis of data from the Telemedicine Approaches to Evaluating Acute-Phase Retinopathy of Prematurity Study. Infants included in the study had a birth weight (BW) of less than 1251 g. Serial ROP examinations of premature infants who had 2 or more ROP examinations. Incidence of RW-ROP (defined as the presence of plus disease, zone I ROP, or ROP stage 3 or greater in either eye) and associations with predictive factors. Among 979 infants without RW-ROP at first study-related eye examination (median postmenstrual age, 33 weeks; range, 29-40 weeks) who underwent at least 2 eye examinations, 149 (15.2%) developed RW-ROP. In a multivariate model, significant predictors for RW-ROP were male sex (odds ratio [OR], 1.80; 95% CI, 1.13-2.86 vs female), nonblack race (OR, 2.76; 95% CI, 1.50-5.08 for white vs black race and OR, 4.81; 95% CI, 2.19-10.6 for other vs black race), low BW (OR, 5.16; 95% CI, 1.12-7.20 for ≤500 g vs >1100 g), younger gestational age (OR, 9.79; 95% CI, 3.49-27.5 for ≤24 weeks vs ≥28 weeks), number of quadrants with preplus disease (OR, 7.12; 95% CI, 2.53-20.1 for 1-2 quadrants and OR, 18.4; 95% CI, 4.28-79.4 for 3-4 quadrants vs no preplus disease), stage 2 ROP (OR, 4.13; 95% CI, 2.13-8.00 vs no ROP), the presence of retinal hemorrhage (OR, 4.36; 95% CI, 1.57-12.1 vs absence), the need for respiratory support (OR, 4.99; 95% CI, 1.89-13.2 for the need for controlled mechanical ventilator; OR, 11.0; 95% CI, 2.26-53.8 for the need for high-frequency oscillatory ventilation vs no respiratory support), and slow weight gain (OR, 2.44; 95% CI, 1.22-4.89 for weight gain ≤12 g/d vs >18 g

  3. Trading Platform for the Global Warrant Markets

    Directory of Open Access Journals (Sweden)

    Iosif ZIMAN

    2011-01-01

    Full Text Available Global warrant markets are among the most active financial markets in the retail derivatives investment landscape currently. In this context some of the most relevant markets in the last years have been the ones across Asia and in particular Hong Kong, Korea and Japan. This paper introduces the financial instruments used in connection with the warrant markets, pre-sents and offers suggestions for setting up a generic warrant market making system and in-troduces the main concepts and components that need to be taken into account when develop-ing these systems targeting an exchange driven or E-Businesscontext.

  4. Additional EIPC Study Analysis. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gotham, Douglas J. [Purdue Univ., West Lafayette, IN (United States); Luciani, Ralph L. [Navigant Consultant Inc., Suwanee, GA (United States)

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  5. Study of zirconium-addition binary systems

    International Nuclear Information System (INIS)

    Wozniakova, B.; Kuchar, L.

    1975-01-01

    The curves are given of the solid and the liquid of binary zirconium-addition systems. Most additions reduce the melting temperature of zirconium. The only known additions to increase the melting temperature are nitrogen, oxygen and hafnium. Also given are the transformation curves of the systems and the elements are given which reduce or raise the temperature of α-β transformation. From the Mendeleev table into which are plotted the curves of the solid and the liquid of binary systems it is possible to predict the properties of unknown binary systems. For the calculations of the curves of the solid and the liquid, 1860 degC was taken as the temperature of zirconium melting. For the calculations of transformation curves, 865 degC was taken as the temperature of α-β transformation. The equations are given of the curves of the solid and the liquid and of the transformation curves of some Zr-addition systems. Also given are the calculated equilibrium distribution coefficients and the equilibrium distribution coefficients of the transformation of additions in Zr and their limit values for temperatures approximating the melting point or the temperature of the transformation of pure Zr, and the values pertaining to eutectic and peritectic or eutectoid and peritectoid temperatures. (J.B.)

  6. Studies of alumina additions in zirconia - magnesia

    International Nuclear Information System (INIS)

    Muccillo, R.

    1987-01-01

    Ionic conductivity measurements have been carried out in the 500 0 C - 1000 0 C temperature range in Mg - PSZ (Partially Stabilized Zirconia) with 0.5 to 10 mol % alumina additions. All specimens were prepared by pressing followed by pre - and sintering at 1000 0 C/2h and1450 0 C/4h, respectively. Thermal histerysis of the ionic conductivity have been detected, probably due to phase changes in the Mg-PSZ samples. The results show that alumina additions up to 2.1% enhances densification with no major variations in electrical resistivity values. (Author) [pt

  7. Study of plutonium-addition systems

    International Nuclear Information System (INIS)

    Kuchar, L.; Wozniakova, B.

    1976-11-01

    Steady state phase diagrams and calculated values of concentrations on the solid and liquid curves, the steady state distribution coefficient and thermodynamic control are presented for temperatures ranging from the eutectic reaction temperatures to the Pu melting point temperature for binary systems plutonium-addition (Mg, Al, Si, Ti, Mn, Fe, Co, Ni, Cu, Zn, Ga, Zr, Ru, Os, Th, U, Np). (J.P.)

  8. Bioactive endophytes warrant intensified exploration and conservation.

    Science.gov (United States)

    Smith, Stephen A; Tank, David C; Boulanger, Lori-Ann; Bascom-Slack, Carol A; Eisenman, Kaury; Kingery, David; Babbs, Beatrice; Fenn, Kathleen; Greene, Joshua S; Hann, Bradley D; Keehner, Jocelyn; Kelley-Swift, Elizabeth G; Kembaiyan, Vivek; Lee, Sun Jin; Li, Puyao; Light, David Y; Lin, Emily H; Ma, Cong; Moore, Emily; Schorn, Michelle A; Vekhter, Daniel; Nunez, Percy V; Strobel, Gary A; Donoghue, Michael J; Strobel, Scott A

    2008-08-25

    A key argument in favor of conserving biodiversity is that as yet undiscovered biodiversity will yield products of great use to humans. However, the link between undiscovered biodiversity and useful products is largely conjectural. Here we provide direct evidence from bioassays of endophytes isolated from tropical plants and bioinformatic analyses that novel biology will indeed yield novel chemistry of potential value. We isolated and cultured 135 endophytic fungi and bacteria from plants collected in Peru. nrDNAs were compared to samples deposited in GenBank to ascertain the genetic novelty of cultured specimens. Ten endophytes were found to be as much as 15-30% different than any sequence in GenBank. Phylogenetic trees, using the most similar sequences in GenBank, were constructed for each endophyte to measure phylogenetic distance. Assays were also conducted on each cultured endophyte to record bioactivity, of which 65 were found to be bioactive. The novelty of our contribution is that we have combined bioinformatic analyses that document the diversity found in environmental samples with culturing and bioassays. These results highlight the hidden hyperdiversity of endophytic fungi and the urgent need to explore and conserve hidden microbial diversity. This study also showcases how undergraduate students can obtain data of great scientific significance.

  9. Bioactive endophytes warrant intensified exploration and conservation.

    Directory of Open Access Journals (Sweden)

    Stephen A Smith

    2008-08-01

    Full Text Available A key argument in favor of conserving biodiversity is that as yet undiscovered biodiversity will yield products of great use to humans. However, the link between undiscovered biodiversity and useful products is largely conjectural. Here we provide direct evidence from bioassays of endophytes isolated from tropical plants and bioinformatic analyses that novel biology will indeed yield novel chemistry of potential value.We isolated and cultured 135 endophytic fungi and bacteria from plants collected in Peru. nrDNAs were compared to samples deposited in GenBank to ascertain the genetic novelty of cultured specimens. Ten endophytes were found to be as much as 15-30% different than any sequence in GenBank. Phylogenetic trees, using the most similar sequences in GenBank, were constructed for each endophyte to measure phylogenetic distance. Assays were also conducted on each cultured endophyte to record bioactivity, of which 65 were found to be bioactive.The novelty of our contribution is that we have combined bioinformatic analyses that document the diversity found in environmental samples with culturing and bioassays. These results highlight the hidden hyperdiversity of endophytic fungi and the urgent need to explore and conserve hidden microbial diversity. This study also showcases how undergraduate students can obtain data of great scientific significance.

  10. Greenhouse gas reductions; not warranted, not beneficial

    International Nuclear Information System (INIS)

    Green, K.

    2003-01-01

    This report deals with climate change and greenhouse gas emissions, especially regional climate change predictions, from a sceptic's point of view. It rejects all the conventional evidence supporting claims of extreme man-made climate changes, dismissing them as alarmist and inherently uncertain. Similarly, it characterizes policy prescriptions based on this evidence as faulty and as measures which, if implemented, would do both current and future generations considerably more harm than good. Calls for energy efficiency and conservation, reliance on renewable energy sources, improved efficiency of conventional vehicles, hybrid and fuel-cell-driven cars, reducing the amount of driving, establishing greenhouse gas registries, are all dismissed as impractical, imposing higher costs on energy generally, slowing economic growth in the process, and scaring people to adopt unwise public policies by exaggerating the certainty of predictions about man-made climate change. While dismissing the arguments advanced by 'old-school' environmentalists, the report does not question the validity of the overall theory or details of the core greenhouse effect, its main targets are the anthropogenic components of the observed temperature record, and the evidence of a clear cause-and-effect link between anthropogenic forcing and changes in the Earth's surface temperature. Overall, the report dismisses the 'conventional' view of the extent of climate change, the cause of that change and the risk it poses. It emphasizes the limitations on economic freedom that proposed policies would inflict, and argues in favour of more studies to provide the foundation for a societal response based on a solid understanding of the science behind climate change, and the impact of proposed policy options. 32 refs., 2 figs

  11. Structure Property Studies for Additively Manufactured Parts

    Energy Technology Data Exchange (ETDEWEB)

    Milenski, Helen M [Univ. of Mexico, Los Alamos, NM (United States); Schmalzer, Andrew Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelly, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  12. Additional media studies for site suitability criteria

    International Nuclear Information System (INIS)

    Donich, T.R.; Kaufman, A.M.; Sauter, G.D.; Steinborn, T.L.; Towse, D.F.

    1978-01-01

    Site suitability studies have been made previously at LLL on bedded salt and shale. In the present study domed salt, basalt, and crystalline rock are compared with bedded salt and shale and with each other as possible repositories. The level of effort required to develop models for these media that are similar in quality to those available for bedded salt and shale is evaluated. The effort necessary to develop data bases on the physical and chemical properties comparable to that available for bedded salt and shale is also estimated. Each medium is evaluated as a suitable repository environment. The funding necessary for model and data base development is estimated

  13. OTEC LSCT study, additional work. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    In the final stage of the Large Systems Construction Techniques (LSCT) study, work on the elastomer cold water pipe and on the design of power modules for the Sparmod platform concept was performed. Six different configurations of pipe are compared, and the pressure difference between the outside and inside of the pipe is analyzed. Static forces in the membrane are also discussed. Calculation of the strength and stability of concrete rings are done. The forces, membrane materials and connection details of the elastomer membrane of the pipe are discussed. Construction and handling of the pipe and rings are discussed, and a rough breakdown of the costs for a 30 m diameter pipe is given. The consequences of the sparmod principles to the OTEC-plant design are investigated. Conceptual design of a 50 MW power module for the 400 MW sparmod design was done, followed by a construction and installation plan. Conceptual design of a 50 MW and 100 MW Plant based on the sparmod principle is done to investigate the influence of scale. (LEW)

  14. DNA binding studies of tartrazine food additive.

    Science.gov (United States)

    Kashanian, Soheila; Zeidali, Sahar Heidary

    2011-07-01

    The interaction of native calf thymus DNA with tartrazine in 10 mM Tris-HCl aqueous solution at neutral pH 7.4 was investigated. Tartrazine is a nitrous derivative and may cause allergic reactions, with a potential of toxicological risk. Also, tartrazine induces oxidative stress and DNA damage. Its DNA binding properties were studied by UV-vis and circular dichroism spectra, competitive binding with Hoechst 33258, and viscosity measurements. Tartrazine molecules bind to DNA via groove mode as illustrated by hyperchromism in the UV absorption band of tartrazine, decrease in Hoechst-DNA solution fluorescence, unchanged viscosity of DNA, and conformational changes such as conversion from B-like to C-like in the circular dichroism spectra of DNA. The binding constants (K(b)) of DNA with tartrazine were calculated at different temperatures. Enthalpy and entropy changes were calculated to be +37 and +213 kJ mol(-1), respectively, according to the Van't Hoff equation, which indicated that the reaction is predominantly entropically driven. Also, tartrazine does not cleave plasmid DNA. Tartrazine interacts with calf thymus DNA via a groove interaction mode with an intrinsic binding constant of 3.75 × 10(4) M(-1).

  15. victoria cross awards warrants concerning the victoria cross (1920)

    African Journals Online (AJOL)

    1. WARRANTS CONCERNING THE. VICTORIA CROSS (1920). In order to get a picture of the Royal Warrants promulgated from 1856 to 1920 in respect of the .... to confirmation by us. Eighthly. - It is ordained, where such an act shall not have been performed in the sight of a commanding officer as aforesaid, then the ...

  16. 19 CFR 162.11 - Authority to procure warrants.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Authority to procure warrants. 162.11 Section 162.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Search Warrants § 162.11 Authority to procure...

  17. From Four to Two: Transformation of the Army Ordnance Officer and Warrant Officer Corps

    National Research Council Canada - National Science Library

    Napier, Joyce

    2003-01-01

    .... This study will examine how senior leaders within the Army and specifically the Ordnance Corps must change the officer and warrant officer force structure education system and leader development...

  18. Reliability in Plantinga´s Account of Epistemic Warrant

    Directory of Open Access Journals (Sweden)

    John C. Wingard, Jr.

    2002-12-01

    Full Text Available In das paper 1 consider the reliability condition in Alvin Platinga’s proper functionalist account of epistemic warrant I begin by reviewing m some detail the features of the reliability condition as Platinga has articulated a From there, 1 consider what is needed to ground or secure the sort of reliability which Plantinga has m mind, and argue that what is needed is a significant causal condition which has generally been overlooked Then, after identifying eight versions of the relevant sort of reliability, I exam me each alternative as to whether as requirement, along with Platinga’s other proposed conditions, would give us a satisfactory account of epistemic warrant I conclude that there is bale to no hope of formulating a reliability condition that would yield a satisfactory analysts of the sort Plantinga desires

  19. Study on thermal effects & sulfurized additives, in lubricating greases

    Science.gov (United States)

    Shah, Ami Atul

    Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to

  20. Clinical pathways for inborn errors of metabolism: warranted and feasible

    Directory of Open Access Journals (Sweden)

    Demirdas Serwet

    2013-02-01

    Full Text Available Abstract Inborn errors of metabolism (IEMs are known for their low prevalence and multidisciplinary care mostly founded on expert opinion. Clinical pathways are multidisciplinary tools to organise care which provide a clear route to the best care and improve communication. In 2010 the Dutch Society for Children and Adults with an Inborn Error of Metabolism (VKS initiated development of clinical pathways for inborn errors of metabolism. In this letter to the editor we describe why it is warranted to develop clinical pathways for IEMs and shortly discuss the process of development for these pathways in the Netherlands.

  1. Entrained Flow Reactor Study of KCl Capture by Solid Additives

    DEFF Research Database (Denmark)

    Wang, Guoliang; Jensen, Peter Arendt; Wu, Hao

    been proved to be very promising additives and havereceived extensive studies during the past decades. However, mostprevious studies were carried out in fixed-bed reactors where the reaction conditions are obviously different from that in suspension fired boilers.Detailed knowledge on the reaction...

  2. Statistical study of chemical additives effects in the waste cementation

    International Nuclear Information System (INIS)

    Tello, Cledola C.O. de; Diniz, Paula S.; Haucz, Maria J.A.

    1997-01-01

    This paper presents the statistical study, that was carried out to analyse the chemical additives effect in the waste cementation process. Three different additives from two industries were tested: set accelerator, set retarder and super plasticizers, in cemented pates with and without bentonite. The experiments were planned in accordance with the 2 3 factorial design, so that the effect of each type of additive, its quantity and manufacturer in cemented paste and specimens could be evaluated. The results showed that the use of these can improve the cementation process and the product. The admixture quantity and the association with bentonite were the most important factors affecting the process and product characteristics. (author). 4 refs., 9 figs., 4 tabs

  3. Electrostatic Levitation for Studies of Additive Manufactured Materials

    Science.gov (United States)

    SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

    2014-01-01

    The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL

  4. Recommended Protocol for Round Robin Studies in Additive Manufacturing

    Science.gov (United States)

    Moylan, Shawn; Brown, Christopher U.; Slotwinski, John

    2016-01-01

    One way to improve confidence and encourage proliferation of additive manufacturing (AM) technologies and parts is by generating more high quality data describing the performance of AM processes and parts. Many in the AM community see round robin studies as a way to generate large data sets while distributing the cost among the participants, thereby reducing the cost to individual users. The National Institute of Standards and Technology (NIST) has conducted and participated in several of these AM round robin studies. While the results of these studies are interesting and informative, many of the lessons learned in conducting these studies concern the logistics and methods of the study and unique issues presented by AM. Existing standards for conducting interlaboratory studies of measurement methods, along with NIST’s experience, form the basis for recommended protocols for conducting AM round robin studies. The role of round robin studies in AM qualification, some of the limitations of round robin studies, and the potential benefit of less formal collaborative experiments where multiple factors, AM machine being only one, are varied simultaneously are also discussed. PMID:27274602

  5. Study of the additional filter in transcatheter hepatic arterial embolization

    International Nuclear Information System (INIS)

    Hitomi, Go; Arao, Shinichi; Tomomitsu, Tatsushi

    2010-01-01

    It is well known that Interventional Radiology (IVR) is useful. However, the patient dose in IVR is increasing because of the prolongation of fluoroscopic time and the increase in the number of radiographies in recent years. We studied the adequacy of the additional filter for the decrease of the skin surface dose in patients with hepatocellular carcinoma of transcatheter arterial embolization (TAE). In 20 patients (15 men and 5 women, average age: 66.9 and 72.0 years old) who had undergone TAE, we estimated the skin surface dose from the records of their exposure condition (tube voltage, tube current, time, and field size of image intensifier) and the results of the phantom experiment with 2 kinds of additional filter. The estimated skin surface dose of the patient was 1.75±0.84 with the additional filter of 1.5 mm thickness of aluminum (1.5 mmAl), 1.46±0.67 Gy with 0.03 mm thickness tantalum (0.03 mmTa) and 1.17±0.55 Gy with 0.06 mm thickness of tantalum (0.06 mmTa). Against a skin surface dose of 1.5 mmAl, the dose reduction of 16.7% was shown in 0.03 mmTa and 33.2% in 0.06 mmTa. With a digital subtraction angiography (DSA) phantom of iodine density 0.5 and 1.0 and 2.0 mgI/ml, DSA images were acquisitioned at tube voltage 70, 80 and 90 kV to compare the detectability of contrast media in 0.06 mmTa with 1.5 mmAl. To evaluate the detectability of contrast media in 0.06 mmTa in 1.5 mmAl, receiver operating characteristic (ROC) analysis was performed with the pixel value of the phantom image. The area under the ROC curve in a 1.5 mmAl filter and the 0.06 mmTa filter provided with each contrast media density and each tube voltage was approximately a constant value. It was suggested that there was no differences in the detectability of contrast media in both additional filters. In conclusion, the skin surface dose of the patient was able to be reduced 33.2% without decreasing contrast media detectability by changing the additional filter from 1.5 mmAl to 0.06 mm

  6. Study of commercial chemical additives for cementation of radioactive waste

    International Nuclear Information System (INIS)

    Mota Vieira, V.; Oliveira, C.C. de

    2015-01-01

    In this research it has been studied the effects of chemical additives (admixtures) in the cementation process of radioactive wastes, which are used to improve the properties of waste cementation process, both of the paste and of the solidified product. However there are a large variety of these materials that are frequently changed or taken out of the market, then it is essential to know the commercially available materials and their effects. The tests were carried out with a solution simulating the evaporator concentrate waste coming from PWR nuclear reactors. It was cemented using two formulations, A and B, incorporating higher or lower amount of waste, respectively. It was added chemical admixtures from two manufacturers (S and H), which were: accelerators, set retarders and superplasticizers. The experiments were organized by a factorial design 23. The measured parameters were the viscosity, the setting time, the paste and product density and the compressive strength. In this study we performed comparative analyzes of the results of compressive strength at age of 28 and 90 days and between the densities of the samples at the same ages. The compressive strength test at age of 28 days is considered a parameter essential issues related to security handling, transport and storage of cemented waste product. The results showed that the addition of accelerators improved the compressive strength of the cemented product, but presented lower values density products. (authors)

  7. Additive Manufacturing Materials Study for Gaseous Radiation Detection

    Energy Technology Data Exchange (ETDEWEB)

    Steer, C.A.; Durose, A.; Boakes, J. [AWE Aldermaston, Reading, Berkshire, RG7 4PR (United Kingdom)

    2015-07-01

    Additive manufacturing (AM) techniques may lead to improvements in many areas of radiation detector construction; notably the rapid manufacturing time allows for a reduced time between prototype iterations. The additive nature of the technique results in a granular microstructure which may be permeable to ingress by atmospheric gases and make it unsuitable for gaseous radiation detector development. In this study we consider the application of AM to the construction of enclosures and frames for wire-based gaseous radiation tracking detectors. We have focussed on oxygen impurity ingress as a measure of the permeability of the enclosure, and the gas charging and discharging curves of several simplistic enclosure shapes are reported. A prototype wire-frame is also presented to examine structural strength and positional accuracy of an AM produced frame. We lastly discuss the implications of this study for AM based radiation detection technology as a diagnostic tool for incident response scenarios, such as the interrogation of a suspect radiation-emitting package. (authors)

  8. Additive Manufacturing Materials Study for Gaseous Radiation Detection

    International Nuclear Information System (INIS)

    Steer, C.A.; Durose, A.; Boakes, J.

    2015-01-01

    Additive manufacturing (AM) techniques may lead to improvements in many areas of radiation detector construction; notably the rapid manufacturing time allows for a reduced time between prototype iterations. The additive nature of the technique results in a granular microstructure which may be permeable to ingress by atmospheric gases and make it unsuitable for gaseous radiation detector development. In this study we consider the application of AM to the construction of enclosures and frames for wire-based gaseous radiation tracking detectors. We have focussed on oxygen impurity ingress as a measure of the permeability of the enclosure, and the gas charging and discharging curves of several simplistic enclosure shapes are reported. A prototype wire-frame is also presented to examine structural strength and positional accuracy of an AM produced frame. We lastly discuss the implications of this study for AM based radiation detection technology as a diagnostic tool for incident response scenarios, such as the interrogation of a suspect radiation-emitting package. (authors)

  9. A Study of Metal-Cement Composites with Additives

    Directory of Open Access Journals (Sweden)

    Mironov Victor

    2014-12-01

    Full Text Available The application of small-sized metal fillers (SMF provides a combination of high bulk density, increased durability and ferromagnetic properties of composite materials on the cement basis. However, the total strength of the composite can be compromised by poor adhesion of metal particles with the cement matrix. The use of versatile additives like microsilica and metakaolin is able to improve the structural integrity and mechanical properties of heavy concretes. The paper considers the results of a study using specimens of heavy concretes with SMF aiming to estimate its strength, structural features and ultrasonic parameters. It was found that the contact of SMF particles with the cement was not perfect, since the voids appeared between them and the cement matrix during the cement hydration process (exothermal reaction. Due to the border porosity, the specimens with the metal fillers have lower compressive strength, lower ultrasound velocity and increased frequency slope of attenuation. Microsilica and metakaolin additives facilitate better contact zone between the cement matrix and metal fillers.

  10. A review on Black-Scholes model in pricing warrants in Bursa Malaysia

    Science.gov (United States)

    Gunawan, Nur Izzaty Ilmiah Indra; Ibrahim, Siti Nur Iqmal; Rahim, Norhuda Abdul

    2017-01-01

    This paper studies the accuracy of the Black-Scholes (BS) model and the dilution-adjusted Black-Scholes (DABS) model to pricing some warrants traded in the Malaysian market. Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) are used to compare the two models. Results show that the DABS model is more accurate than the BS model for the selected data.

  11. Black-Scholes finite difference modeling in forecasting of call warrant prices in Bursa Malaysia

    Science.gov (United States)

    Mansor, Nur Jariah; Jaffar, Maheran Mohd

    2014-07-01

    Call warrant is a type of structured warrant in Bursa Malaysia. It gives the holder the right to buy the underlying share at a specified price within a limited period of time. The issuer of the structured warrants usually uses European style to exercise the call warrant on the maturity date. Warrant is very similar to an option. Usually, practitioners of the financial field use Black-Scholes model to value the option. The Black-Scholes equation is hard to solve analytically. Therefore the finite difference approach is applied to approximate the value of the call warrant prices. The central in time and central in space scheme is produced to approximate the value of the call warrant prices. It allows the warrant holder to forecast the value of the call warrant prices before the expiry date.

  12. Studies on metal hydride electrodes containing no binder additives

    Energy Technology Data Exchange (ETDEWEB)

    Rogulski, Z.; Dlubak, J. [Industrial Chemistry Research Institute, Rydygiera 8, 01-793 Warsaw (Poland); Karwowska, M.; Gumkowska, A.; Czerwinski, A. [Department of Chemistry, Warsaw University, Pasteura 1, 02-093 Warsaw (Poland); Krebs, M.; Pytlik, E.; Schmalz, M. [VARTA Microbattery GmbH, Daimlerstrasse 1, 73479 Ellwangen (Germany)

    2010-11-15

    Electrochemical properties of hydrogen storage alloys (AB{sub 5} type: LaMm-Ni{sub 4.1}Al{sub 0.3}Mn{sub 0.4}Co{sub 0.45}) were studied in 6 M KOHaq using Limited Volume Electrode (LVE) method. Working electrodes were prepared by pressing alloy powder (without binding and conducting additives) into a metal net wire serving as a support and as a current collector. Cyclic voltammetry curves reveal well defined hydrogen sorption and desorption peaks which are separated from other faradic processes, such as surface oxidation. Voltammograms of LVE resemble the curves obtained by various authors for single particle metal alloy electrodes. Hydrogen diffusion coefficient calculated at room temperature for LV electrodes and for 100% state of charge reaches a constant value of ca. 3.3 x 10{sup -9} and 2.1 x 10{sup -10} cm{sup 2} s{sup -1}, for chronoamperometric and chronopotentiometric measurements, respectively. A comparison of the electrodes with average alloy particle sizes of ca. 50 and 4 {mu}m allows us to conclude that at room temperature hydrogen storage capability of AB{sub 5} alloy studied is independent on the alloy particle size. On the other hand, reduction of the particle size increases alloy capacity at temperatures below -10 C and reduces time of electrochemical activation of the electrode. (author)

  13. Adsorption of molecular additive onto lead halide perovskite surfaces: A computational study on Lewis base thiophene additive passivation

    Science.gov (United States)

    Zhang, Lei; Yu, Fengxi; Chen, Lihong; Li, Jingfa

    2018-06-01

    Organic additives, such as the Lewis base thiophene, have been successfully applied to passivate halide perovskite surfaces, improving the stability and properties of perovskite devices based on CH3NH3PbI3. Yet, the detailed nanostructure of the perovskite surface passivated by additives and the mechanisms of such passivation are not well understood. This study presents a nanoscopic view on the interfacial structure of an additive/perovskite interface, consisting of a Lewis base thiophene molecular additive and a lead halide perovskite surface substrate, providing insights on the mechanisms that molecular additives can passivate the halide perovskite surfaces and enhance the perovskite-based device performance. Molecular dynamics study on the interactions between water molecules and the perovskite surfaces passivated by the investigated additive reveal the effectiveness of employing the molecular additives to improve the stability of the halide perovskite materials. The additive/perovskite surface system is further probed via molecular engineering the perovskite surfaces. This study reveals the nanoscopic structure-property relationships of the halide perovskite surface passivated by molecular additives, which helps the fundamental understanding of the surface/interface engineering strategies for the development of halide perovskite based devices.

  14. The valuation of equity warrants under the fractional Vasicek process of the short-term interest rate

    Science.gov (United States)

    Xiao, Weilin; Zhang, Weiguo; Zhang, Xili; Chen, Xiaoyan

    2014-01-01

    Motivated by the empirical evidence of long range dependence in short-term interest rates and considering the long maturities of equity warrants, we propose the fractional Vasicek model to describe the dynamics of the short rate in the pricing environment of equity warrants. Using the partial differential equation approach, we present a valuation model for equity warrants under the assumption that the short rate follows the fractional Vasicek process. After identifying the pricing model for equity warrants, we provide the parameter estimation procedure for the proposed pricing model. Since obtaining the values of equity warrants from the proposed model needs to solve a nonlinear equation, we employ a hybrid intelligent algorithm to get around this optimization problem. Furthermore, to illustrate the practicality of our proposed model, we conduct an empirical study to ascertain the performance of our proposed model using the data from China’s warrant market and the China Foreign Exchange Trade System. The comparison of traditional models (such as the Black-Scholes model, the Noreen-Wolfson model, the Lauterbach-Schultz model, and the Ukhov model) with our proposed model is also presented. The empirical results show that the mean absolute percentage error of our pricing model is 10.30%. By contrast, the Black-Scholes model, the Noreen-Wolfson model, the Lauterbach-Schultz model, and the Ukhov model applied to the same warrant produce mean absolute errors of 35.26%, 37.67%, 33.40%, 32.81%, respectively. Thus the long memory property in stochastic interest rates cannot be ignored in determining the valuation of equity warrants.

  15. Quantum-chemical study of antioxidant additives for jet fuels

    Energy Technology Data Exchange (ETDEWEB)

    Poletaeva, O.Yu. [Ufa State Petroleum Technological Univ., Ufa (Russian Federation); Karimova, R.I. [Bashkir State Agrarian Univ., Ufa (Russian Federation); Movsumzade, E.M. [Institute of Education of Indigenous Small-Numbered Peoples of the North RAE, Moscow (Russian Federation)

    2012-07-01

    To obtain the necessary quality of jet fuels it can be used technological methods (hydrocracking, deep hydration, hydrogenation) that increases the cost of the finished product. The second way is to use less purified raw materials with the introduction of effective additives. Fuels obtained by direct distillation, in ambient air are oxidized with great difficulty and oxidation products accumulate in them is very slow. Fuels derived by hydrogenation processes, have high susceptibility to oxidation, as a result in 1-2 years of storage considerably reduced their quality. Antioxidant additives play an important role in improving the quality of jet fuel. (orig.)

  16. Antiwear and antioxidant studies of cardanol phosphate ester additives

    Energy Technology Data Exchange (ETDEWEB)

    Mazzetto, S.E.; Oliveira, L.D.M.; Lomonaco, D.; Veloso, P.A., E-mail: selma@ufc.br [Lab. de Produtos e Tecnologia em Processos (LPT), Dept. de Quimica Organica e Inorganica, Universidade Federal do Ceara, Fortaleza, CE (Brazil)

    2012-07-15

    In the search for new applications and products derived from Cashew Nut Shell Liquid (CNSL), we report herein the synthesis and characterization (GC/MS and {sup 1}H, {sup 13}C, and {sup 31}P NMR) of four phosphate esters derived from hydrogenated cardanol, including their applications as antiwear additives for diesel (S500) and as antioxidant additives for mineral oils, evaluated through the HFRR test and oxidative stability analyses, respectively. The results obtained showed very good to excellent performances promoted by the bioadditives evaluated, especially for the thiophosphorylated derivative, which notably reduced the sludge residue and the acidity index of the oxidized oil (0.52 mg NaOH/g sample) and also improved the diesel lubricity, reducing the wear of metal parts by more than 50% (330 {Mu}m). Keywords: Cardanol; Antiwear; Antioxidant; Diesel; Mineral oil. (author)

  17. Execution of the European Arrest Warrant by the Romanian Judicial Authorities

    Directory of Open Access Journals (Sweden)

    Ion Rusu

    2009-06-01

    Full Text Available The unprecedented development of criminality at the social and economical levels, the tendency toglobalize some categories of crimes, of maximum gravity, as terrorism, armament traffic, drug traffic orhuman traffic, have determined the world states to undertake specific measures to prevent, combat and finallyreduce it. The first and most important measure taken by the Europe’s Council, regarding the intensificationof judicial cooperation in criminal matters was the adoption of the European Convention on extradition, inParis on 13 December 1957, completed by the two Additional Protocols in Strasbourg, on 15 October 1975and 17 March 1978. In this context, the release of the Council’s Framework Decision on 13 June 2002 on theEuropean arrest warrant and the procedures of delivery among the member states (2002/584/JAI representeda natural decision, with the purpose of contributing at ensuring a free, secure and just European space. TheEuropean arrest warrant is a judicial decision through which a competent judicial authority of a EuropeanUnion member state solicits the arrest and delivery by another member state, in order to proceed to theprosecution, trial or execution of a penalty or safety measure that is privative of freedom.

  18. Adaptation of warrant price with Black Scholes model and historical volatility

    Science.gov (United States)

    Aziz, Khairu Azlan Abd; Idris, Mohd Fazril Izhar Mohd; Saian, Rizauddin; Daud, Wan Suhana Wan

    2015-05-01

    This project discusses about pricing warrant in Malaysia. The Black Scholes model with non-dividend approach and linear interpolation technique was applied in pricing the call warrant. Three call warrants that are listed in Bursa Malaysia were selected randomly from UiTM's datastream. The finding claims that the volatility for each call warrants are different to each other. We have used the historical volatility which will describes the price movement by which an underlying share is expected to fluctuate within a period. The Black Scholes model price that was obtained by the model will be compared with the actual market price. Mispricing the call warrants will contribute to under or over valuation price. Other variables like interest rate, time to maturity date, exercise price and underlying stock price are involves in pricing call warrants as well as measuring the moneyness of call warrants.

  19. Heely injuries: a new epidemic warranting a government health warning!

    Science.gov (United States)

    Lenehan, B; Callender, O; McIntyre, A; Boran, S; Moore, D; Fogarty, E; Dowling, F

    2007-08-01

    Heelys, the new craze gripping the nation, were first introduced to Ireland in 2005 having been available in the United States since 2000. Designed as "the only shoe with a removable wheel in the sole" and initially marketed among rollerbladers and skateboarders they have been adopted by children as contemporary footwear. From April to June 2006, all patients presenting to trauma orthopaedic services at our institutions with injuries sustained while wearing Heelys were included in this study. Thirty-nine patients are included in this study. The mean age was 9.1 years (range 7-13, median 9 years). Of the 39 patients referred to the orthopaedic service, 8 required admissions to hospital. One patient admitted following a head injury, required craniotomy and evacuation of an extradural haematoma. The significance of the injuries encountered demonstrates the potentially devastating results from the use of Heelys. The public perception of safety is incorrect and manufacturers rightly recommend strongly the use of safety gear.

  20. A universal freeze all strategy: why it is not warranted.

    Science.gov (United States)

    Ata, Baris; Seli, Emre

    2017-06-01

    There's some preclinical evidence of an adverse effect of multifollicular growth on endometrial function in assisted reproductive technology cycles. Universal elective frozen embryo transfer (eFET) in an unstimulated cycle is being promoted as a panacea, regardless of patient, and cycle characteristics. We review the clinical evidence on the effectiveness and safety of eFETs. Randomized controlled trials (RCTs) comparing fresh and eFET yield contradictory results in terms of live birth rates. RCTs mainly involve women with an excessive response to ovarian stimulation. Studies including women with a normal or low ovarian response are either patient/physician preference or retrospective studies, prone to bias. Yet, they yield contradictory results as well. Overall, eFET seems to have limited potential to improve effectiveness of assisted reproductive technology, which could be limited to hyper-responders. Other suggested advantages of eFET include better obstetric and perinatal outcome. However, recent studies show that frozen embryo transfers can be associated with serious complications including hypertensive disorders during pregnancy, placenta accreta, or increased perinatal mortality. The evidence behind advantages of eFET is of low quality. As such, switching to a universal eFET strategy does not seem justified. New RCTs including women from different strata of ovarian response are needed.

  1. Fumigant emission reductions with TIF warrant regulatory changes

    Directory of Open Access Journals (Sweden)

    Husein Ajwa

    2013-07-01

    Full Text Available With methyl bromide's phase-out, most growers have turned to alternative fumigants, particularly 1,3-dichloropropene (1,3-D and chloropicrin. These alternatives are tightly regulated because they are classified as toxic air contaminants and volatile organic compounds; the latter combine with other substances to produce ground-level ozone (smog. Two ambient air monitoring studies were conducted to evaluate the potential of totally impermeable film (TIF to reduce emissions from shank applications of chloropicrin and 1,3-D. In 2009, a study demonstrated that TIF reduced chloropicrin and 1,3-D peak emissions by 45% and 38%, respectively, but TIF did not reduce total emissions when it was cut after 6 days. In 2011, increasing the tarp period from 5 to 10 days decreased chloropicrin and 1,3-D peak emissions by 88% and 78%, and their total emissions by 64% and 43%, respectively. Concurrent dynamic flux chamber results corroborated the ambient air monitoring data. These studies provide regulatory agencies with mitigation measures that should allow continued fumigant use at efficacious application rates.

  2. Instability in Thoracolumbar Trauma: Is a New Definition Warranted?

    Science.gov (United States)

    Abbasi Fard, Salman; Skoch, Jesse; Avila, Mauricio J; Patel, Apar S; Sattarov, Kamran V; Walter, Christina M; Baaj, Ali A

    2017-10-01

    Review of the articles. The objective of this study was to review all articles related to spinal instability to determine a consensus statement for a contemporary, practical definition applicable to thoracolumbar injuries. Traumatic fractures of the thoracolumbar spine are common. These injuries can result in neurological deficits, disability, deformity, pain, and represent a great economic burden to society. The determination of spinal instability is an important task for spine surgeons, as treatment strategies rely heavily on this assessment. However, a clinically applicable definition of spinal stability remains elusive. A review of the Medline database between 1930 and 2014 was performed limited to papers in English. Spinal instability, thoracolumbar, and spinal stability were used as search terms. Case reports were excluded. We reviewed listed references from pertinent search results and located relevant manuscripts from these lists as well. The search produced a total of 694 published articles. Twenty-five articles were eligible after abstract screening and underwent full review. A definition for spinal instability was described in only 4 of them. Definitions were primarily based on biomechanical and classification studies. No definitive parameters were outlined to define stability. Thirty-six years after White and Panjabi's original definition of instability, and many classification schemes later, there remains no practical and meaningful definition for spinal instability in thoracolumbar trauma. Surgeon expertise and experience remains an important factor in stability determination. We propose that, at an initial assessment, a distinction should be made between immediate and delayed instability. This designation should better guide surgeons in decision making and patient counseling.

  3. Adult-onset offenders: Is a tailored theory warranted?

    Science.gov (United States)

    Beckley, Amber L.; Caspi, Avshalom; Harrington, Honalee; Houts, Renate M.; Mcgee, Tara Renae; Morgan, Nick; Schroeder, Felix; Ramrakha, Sandhya; Poulton, Richie; Moffitt, Terrie E.

    2016-01-01

    Purpose To describe official adult-onset offenders, investigate their antisocial histories and test hypotheses about their origins. Methods We defined adult-onset offenders among 931 Dunedin Study members followed to age 38, using criminal-court conviction records. Results Official adult-onset offenders were 14% of men, and 32% of convicted men, but accounted for only 15% of convictions. As anticipated by developmental theories emphasizing early-life influences on crime, adult-onset offenders’ histories of antisocial behavior spanned back to childhood. Relative to juvenile-offenders, during adolescence they had fewer delinquent peers and were more socially inhibited, which may have protected them from conviction. As anticipated by theories emphasizing the importance of situational influences on offending, adult-onset offenders, relative to non-offenders, during adulthood more often had schizophrenia, bipolar disorder, and alcohol-dependence, had weaker social bonds, anticipated fewer informal sanctions, and self-reported more offenses. Contrary to some expectations, adult-onset offenders did not have high IQ or high socioeconomic-status families protecting them from juvenile conviction. Conclusions A tailored theory for adult-onset offenders is unwarranted because few people begin crime de novo as adults. Official adult-onset offenders fall on a continuum of crime and its correlates, between official non-offenders and official juvenile-onset offenders. Existing theories can accommodate adult-onset offenders. PMID:27134318

  4. NMR relaxometry study of plaster mortar with polymer additives

    Energy Technology Data Exchange (ETDEWEB)

    Jumate, E.; Manea, D. [Technical University of Cluj-Napoca, Faculty of Civil Engineering. 15 C Daicoviciu Str., 400020, Cluj-Napoca (Romania); Moldovan, D.; Fechete, R. [Technical University of Cluj-Napoca, Department of Physics and Chemistry, 25 G. Baritiu Str., 400027, Cluj-Napoca (Romania)

    2013-11-13

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T{sub 2} relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T{sub 2} distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T{sub 2} relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T{sub 2} relaxation rates corresponding to the bound water.

  5. NMR relaxometry study of plaster mortar with polymer additives

    Science.gov (United States)

    Jumate, E.; Moldovan, D.; Fechete, R.; Manea, D.

    2013-11-01

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T2 relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T2 distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T2 relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T2 relaxation rates corresponding to the bound water.

  6. NMR relaxometry study of plaster mortar with polymer additives

    International Nuclear Information System (INIS)

    Jumate, E.; Manea, D.; Moldovan, D.; Fechete, R.

    2013-01-01

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T 2 relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T 2 distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T 2 relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T 2 relaxation rates corresponding to the bound water

  7. Environmental studies related to additional capacity on the Manicouagan River

    International Nuclear Information System (INIS)

    Guertin, G.; Tremblay, S.; Delagrave, M.

    1989-01-01

    Increasing the capacity of the hydroelectric power plants on the Manicouagan River in Quebec will have the effect of increasing flows in winter and decreasing flows in summer. These changes in flow and in the tidal range at the Manicouagan estuary could have effects on the thermal balance of the reservoirs, ice formation, erosion of river banks, and other effects on wildlife and local populations using the river resources. Studies were undertaken to determine the environmental feasibility of increasing the power plant capacity, the limits of such an increase, and the measures needed to mitigate any adverse effects. The studies concentrated on the effects on the reservoirs and the estuary. It appears that the salmonids in the Manic 5 reservoir will be affected by a lowering of water levels and an accentuation in the tidal range. The reproduction of whitefish and lake charr in the reservoirs will probably be reduced by the lowering of winter flow levels. The effects on the estuary were examined by a combination of oceanographic investigations and hydrodynamic model studies. Invasion of salt water into the estuary during high tide could move upstream during low-flow periods in summer, affecting fish breeding grounds. A minimum flow of 400 m 3 /s is needed upstream of Pointe des Booms to ensure an adequate habitat for survival of larvae of anadramous fish species. The forecast maximum winter flow is not perceived to affect species survival. The effects on commercial fishing would be minimal. 2 refs., 1 fig., 5 tabs

  8. Porosity study on free mineral addition cement paste

    International Nuclear Information System (INIS)

    Salgueiro, W.; Somoza, A.; Cabrera, O.; Consolati, G.

    2004-01-01

    A study of the hydration process and the porosity evolution in a cement paste is presented. The analysis of porosity was made in samples with water to cement ratios (w/c) of 0.24, 0.40 and 0.60 at age of 3, 7, 28 and 365 days, respectively. Information on the evolution of total porosity and on the strength of the paste were obtained using positron annihilation lifetime spectroscopy (PALS), scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical tests (compression and flexion) and water absorption techniques. Specifically, positron lifetime technique allowed us to analyze the evolution of gel and capillary porosity during the hydration process. Using a simple function proposed, reasonable fits to the experimental data of the porosity evolution as a function of the compression strength were obtained

  9. Additional EIPC Study Analysis: Interim Report on High Priority Topics

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W [ORNL

    2013-11-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 13 topics was developed for further analysis; this paper discusses the first five.

  10. Announcement effects of convertible bond loans versus warrant-bond loans : An empirical analysis for the Dutch market

    NARCIS (Netherlands)

    de Roon, F.A.; Veld, C.H.

    1995-01-01

    This study investigates the announcement effects of offerings of convertible bond loans and warrant-bond loans using data for the Dutch market. Using standard event study methodology it is found that on average stock prices show a positive but insignificant abnormal return for the announcement of a

  11. Study on risk insight for additional ILRT interval extension

    International Nuclear Information System (INIS)

    Seo, M. R.; Hong, S. Y.; Kim, M. K.; Chung, B. S.; Oh, H. C.

    2005-01-01

    In U.S., the containment Integrated Leakage Rate Test (ILRT) interval was extended from 3 times per 10 years to once per 10 years based on NUREG-1493 'Performance-Based Containment Leak-Test Program' in 1995. In September, 2001, ILRT interval was extended up to once per 15 years based on Nuclear Energy Industry (NEI) provisional guidance 'Interim Guidance for Performing Risk Impact Assessments In Support of One-Time Extensions for Containment Integrated Leakage Rate Test Surveillance Intervals'. In Korea, the containment ILRT was performed with 5 year interval. But, in MOST(Ministry of Science and Technology) Notice 2004-15 'Standard for the Leak- Rate Test of the Nuclear Reactor Containment', the extension of the ILRT interval to once per 10 year can be allowed if some conditions are met. So, the safety analysis for the extension of Yonggwang Nuclear (YGN) Unit 1 and 2 ILRT interval extension to once per 10 years was completed based on the methodology in NUREG-1493. But, during review process by regulatory body, KINS, it was required that some various risk insight or index for risk analysis should be developed. So, we began to study NEI interim report for 15 year ILRT interval extension. As previous analysis based on NUREG-1493, MACCS II (MELCOR Accident Consequence Code System) computer code was used for the risk analysis of the population, and the population dose was selected as a reference index for the risk evaluation

  12. Food additives and Hymenolepis nana infection: an experimental study.

    Science.gov (United States)

    El-Nouby, Kholoud A; Hamouda, Hala E; Abd El Azeem, Mona A; El-Ebiary, Ahmad A

    2009-12-01

    The effect of sodium benzoate (SB) on the pathogenesis of Hymenolepis nana (H. nana) and its neurological manifestations was studied in the present work. One hundred and thirty five mice were classified into three groups. GI: received SB alone. GII: received SB before & after infection with H. nana and GIII: infected with H. nana. All groups were subjected to parasitological, histopathological, immunohistochemical and biochemical assays. The results revealed a significant decrease in IL-4 serum level with a significant increase in gamma amino butyric acid (GABA) and decrease in zinc brain levels in GI, while GII showed non significant increase in IL-4 level that resulted in a highly significant increase in the mean number of cysticercoids and adult worms with delayed expulsion as compared to GIII. This was reflected on histopathological and immunohistochemical changes in the brain. Also, there was a highly significant increase in GABA and decrease in zinc brain levels in GII to the degree that induced behavioral changes. This emphasizes the possible synergistic effect of SB on the neurological manifestations of H. nana and could, in part, explain the increased incidence of behavioral changes in children exposed to high doses of SB and unfortunately have H. nana infection.

  13. Crystallization study of Sn additive Se–Te chalcogenide alloys

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Rahim, M.A.; Gaber, A.; Abu-Sehly, A.A.; Abdelazim, N.M., E-mail: nana841@hotmail.co.uk

    2013-08-20

    Highlights: • The aim of the work deals with studying the crystallization kinetics by using different method. • Values of various kinetic parameters were calculated. • The results indicate that the rate of crystallization is related to the thermal stability and glass forming ability. - Abstract: Results of differential thermal analysis (DTA) under non-isothermal conditions of glasses Se{sub 90−x}Te{sub 10}Sn{sub x} (x = 0, 2.5, 5 and 7 at.%) are reported and discussed. The glass transition temperature (T{sub g}), the onset crystallization temperature (T{sub c}) and the peak temperature of crystallization (T{sub p}) were found to be dependent on the compositions and the heating rate. Values of various kinetic parameters such as activation energy of glass transition (E{sub g}), activation energy of crystallization (E{sub c}), rate constant (K{sub p}), Hurby number (H{sub r}) and the order parameter (n) were determined. For the present systems, the results indicate that the rate of crystallization is related to thermal stability and glass forming ability (GFA). According to the Avrami exponent (n), the results show a one dimensional growth for the composition Se{sub 90}Te{sub 10} and a three dimensional growth for the three other compositions. The crystalline phases resulting from DTA and (SEM) have been identified using X-ray diffraction.

  14. EU Citizenship and European Arrest Warrant: The Same Rights for All?

    NARCIS (Netherlands)

    Marguery, T.P.

    2011-01-01

    In the case Wolzenburg, the principle of non-discrimination of European Union citizens is applied to the European arrest warrant. The implementation of the European arrest warrant by the Member States cannot escape a control of proportional- ity made by the Court. Member States may impose a period

  15. 8 CFR 287.3 - Disposition of cases of aliens arrested without warrant.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Disposition of cases of aliens arrested without warrant. 287.3 Section 287.3 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS FIELD OFFICERS; POWERS AND DUTIES § 287.3 Disposition of cases of aliens arrested without warrant...

  16. 8 CFR 287.9 - Criminal search warrant and firearms policies.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Criminal search warrant and firearms policies. 287.9 Section 287.9 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS FIELD OFFICERS; POWERS AND DUTIES § 287.9 Criminal search warrant and firearms policies. (a) A...

  17. Behavioral Preferences for Individual Securities : The Case for Call Warrants and Call Options

    NARCIS (Netherlands)

    Ter Horst, J.R.; Veld, C.H.

    2002-01-01

    Since 1998, large investment banks have flooded the European capital markets with issues of call warrants.This has led to a unique situation in the Netherlands, where now call warrants, traded on the stock exchange, and long-term call options, traded on the options exchange, exist.Both entitle their

  18. Homotopy Analysis Method for Boundary-Value Problem of Turbo Warrant Pricing under Stochastic Volatility

    Directory of Open Access Journals (Sweden)

    Hoi Ying Wong

    2013-01-01

    Full Text Available Turbo warrants are liquidly traded financial derivative securities in over-the-counter and exchange markets in Asia and Europe. The structure of turbo warrants is similar to barrier options, but a lookback rebate will be paid if the barrier is crossed by the underlying asset price. Therefore, the turbo warrant price satisfies a partial differential equation (PDE with a boundary condition that depends on another boundary-value problem (BVP of PDE. Due to the highly complicated structure of turbo warrants, their valuation presents a challenging problem in the field of financial mathematics. This paper applies the homotopy analysis method to construct an analytic pricing formula for turbo warrants under stochastic volatility in a PDE framework.

  19. Unreliable patient identification warrants ABO typing at admission to check existing records before transfusion.

    Science.gov (United States)

    Ferrera-Tourenc, V; Lassale, B; Chiaroni, J; Dettori, I

    2015-06-01

    This study describes patient identification errors leading to transfusional near-misses in blood issued by the Alps Mediterranean French Blood Establishment (EFSAM) to Marseille Public Hospitals (APHM) over an 18-month period. The EFSAM consolidates 14 blood banks in southeast France. It supplies 149 hospitals and maintains a centralized database on ABO types used at all area hospitals. As an added precaution against incompatible transfusion, the APHM requires ABO testing at each admission regardless of whether the patient has an ABO record. The study goal was to determine if admission testing was warranted. Discrepancies between ABO type determined by admission testing and records in the centralized database were investigated. The root cause for each discrepancy was classified as specimen collection or patient admission error. Causes of patient admission events were further subclassified as namesake (name similarity) or impersonation (identity fraud). The incidence of ABO discrepancies was 1:2334 including a 1:3329 incidence of patient admission events. Impersonation was the main cause of identity events accounting for 90.3% of cases. The APHM's ABO control policy prevented 19 incompatible transfusions. In relation to the 48,593 packed red cell units transfused, this would have corresponded to a risk of 1:2526. Collecting and storing ABO typing results in a centralized database is an essential public health tool. It allows crosschecking of current test results with past records and avoids redundant testing. However, as patient identification remains unreliable, ABO typing at each admission is still warranted to prevent transfusion errors. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  20. Varant Yatırımcısının Volatilite Algısına Etki Eden Faktörler: BIST’de Ampirik Bir Uygulama(Factors Affecting the Volatility Perception of Warrant Investors: An Empirical Research on BIST

    Directory of Open Access Journals (Sweden)

    İsrafil ZOR

    2013-12-01

    Full Text Available The aim of the study is to determine the factors that affect the volatility perception of warrant investors. By using 3.187 daily data of 61 call warrants whose underlying asset is BIST-30 Index and traded on BIST in 2012, firstly efficient option pricing model for the related market is confirmed and then volatilities that equalizes the efficient model prices to market prices are calculated and regression analysis is applied to determine factors that affect the volatility. The results of the analysis are revealed that if the closing price of the underlying asset, the days to maturity of the warrant and Turkish Lira Interbank rate increase, the volatility perceived by investors will decrease. Also, there is positive relationship between the closing price of warrants and the perceived volatility. In addition perceived volatility is higher on Monday and first decrease in inflation after 4 months increase reduces the perceived volatility.

  1. Placing the pieces: Reconstructing the original property mosaic in a warrant and patent watershed

    Science.gov (United States)

    Bain, D.J.; Brush, G.S.

    2005-01-01

    Recent research shows that land use history is an important determinant of current ecosystem function. In the United States, characterization of land use change following European settlement requires reconstruction of the original property mosaic. However, this task is difficult in unsystematically surveyed areas east of the Appalachian Mountains. The Gwynns Falls watershed (Baltimore, MD) was originally surveyed in the 1600-1700s under a system of warrants and patents (commonly known as 'metes and bounds'). A method for the reconstruction and mapping of warrant and patent properties is presented and used to map the original property mosaic in the Gwynns Falls watershed. Using the mapped mosaic, the persistence of properties and property lines in the current Gwynns Falls landscape is considered. The results of this research indicate that as in agricultural areas, the original property lines in the Gwynns Falls watershed are persistent. At the same time, the results suggest that the property mosaic in heavily urbanized/suburbanized areas is generally 'reset.' Further, trends in surveying technique, parcel size, and settlement patterns cause property line density and property shape complexity to increase in the less urbanized upper watershed. The persistence of original patterns may be damping expression of heterogeneity gradients in this urban landscape. This spatial pattern of complexity in the original mosaic is directly opposite of hypothesized patterns of landscape heterogeneity arising from urbanization. The technique reported here and the resulting observations are important for landscape pattern studies in areas settled under unsystematic survey systems, especially the heavily urbanized areas of the eastern United States. ?? 2004 Kluwer Academic Publishers.

  2. Right-­turn traffic volume adjustment in traffic signal warrant analysis : final report.

    Science.gov (United States)

    2016-05-06

    This report was based on the research project, Right-Turn Traffic Volume Adjustment in Traffic Signal Warrants, sponsored by the Nevada Department of Transportation (NDOT) and SOLARIS. Right-turn traffic does not affect intersection performance in th...

  3. Right-\\0xADturn traffic volume adjustment in traffic signal warrant analysis : final report.

    Science.gov (United States)

    2016-05-06

    This report was based on the research project, Right-Turn Traffic Volume Adjustment in : Traffic Signal Warrants, sponsored by the Nevada Department of Transportation (NDOT) : and SOLARIS. Right-turn traffic does not affect intersection performance i...

  4. Financial oil derivatives: from options to oil warrants and synthetic oilfields

    International Nuclear Information System (INIS)

    Trabia, Xavier

    1992-01-01

    This study aims to shed light on some of the most interesting financial oil derivatives issued so far in order to assess the potential of this new wave of innovative funding instruments. In Part I some theoretical background is provided and applied to the problem of the American futures option. The ''binomial'' model for valuing future option contracts is presented and the most accurate alternatives for pricing American futures options are reviewed. The role of these numerical procedures in valuing more complex options involved in oil warrants is examined. Comments are made on the behaviour of volatility, which stands as a key interface between theory and practice in oil trading on the oil futures market. Part II of the study describes in detail some of the most famous new financial oil derivatives. Some final conclusions are drawn on the potential of oil trusts and synthetic oilfields to be involved in project and general funding in the oil industry. (44 figures, 11 tables, 53 references) (UK)

  5. SMARTPHONE-BASED DILATED FUNDUS PHOTOGRAPHY AND NEAR VISUAL ACUITY TESTING AS INEXPENSIVE SCREENING TOOLS TO DETECT REFERRAL WARRANTED DIABETIC EYE DISEASE.

    Science.gov (United States)

    Toy, Brian C; Myung, David J; He, Lingmin; Pan, Carolyn K; Chang, Robert T; Polkinhorne, Alison; Merrell, Douglas; Foster, Doug; Blumenkranz, Mark S

    2016-05-01

    To compare clinical assessment of diabetic eye disease by standard dilated examination with data gathered using a smartphone-based store-and-forward teleophthalmology platform. 100 eyes of 50 adult patients with diabetes from a health care safety-net ophthalmology clinic. All patients underwent comprehensive ophthalmic examination. Concurrently, a smartphone was used to estimate near visual acuity and capture anterior and dilated posterior segment photographs, which underwent masked, standardized review. Quantitative comparison of clinic and smartphone-based data using descriptive, kappa, Bland-Altman, and receiver operating characteristic analyses was performed. Smartphone visual acuity was successfully measured in all eyes. Anterior and posterior segment photography was of sufficient quality to grade in 96 and 98 eyes, respectively. There was good correlation between clinical Snellen and smartphone visual acuity measurements (rho = 0.91). Smartphone-acquired fundus photographs demonstrated 91% sensitivity and 99% specificity to detect moderate nonproliferative and worse diabetic retinopathy, with good agreement between clinic and photograph grades (kappa = 0.91 ± 0.1, P smartphone-based telemedicine system that demonstrated sensitivity and specificity to detect referral-warranted diabetic eye disease as a proof-of-concept. Additional studies are warranted to evaluate this approach to expanding screening for diabetic retinopathy.

  6. Intraday Trading Patterns in the Equity Warrants and Equity Options Markets: Australian Evidence

    Directory of Open Access Journals (Sweden)

    Lydia Segara

    2007-06-01

    Full Text Available This paper extends the microstructure literature, by examining the previouslyundocumented intraday trading patterns in trading volume, price volatility, order depthand relative spreads for both the warrant and option market in Australia. Comparisons ofintraday variations across these derivative securities allows for insight to be drawn intocompeting market microstructure theories and provides the opportunity to examinewhether market design differences explain variations in observed intraday patterns. Wefind that intraday trading patterns documented in the warrant and option markets can beexplained by their market designs, along with theories relating to time-varying informationasymmetry and time-varying hedging trades around nontrading periods.

  7. Is a comparative clinical trial for breast cancer tumor markers to monitor disease recurrence warranted? A value of information analysis.

    Science.gov (United States)

    Thariani, Rahber; Henry, Norah Lynn; Ramsey, Scott D; Blough, David K; Barlow, Bill; Gralow, Julie R; Veenstra, David L

    2013-05-01

    Breast cancer tumor markers are used by some clinicians to screen for disease recurrence risk. Since there is limited evidence of benefit, additional research may be warranted. To assess the potential value of a randomized clinical trial of breast tumor marker testing in routine follow-up of high-risk, stage II-III breast cancer survivors. We developed a decision-analytic model of tumor marker testing plus standard surveillance every 3-6 months for 5 years. The expected value of sample information was calculated using probabilistic simulations and was a function of: the probability of selecting the optimal monitoring strategy with current versus future information; the impact of choosing the nonoptimal strategy; and the size of the population affected. The value of information for a randomized clinical trial involving 9000 women was US$214 million compared with a cost of US$30-60 million to conduct such a trial. The probability of making an alternate, nonoptimal decision and choosing testing versus no testing was 32% with current versus future information from the trial. The impact of a nonoptimal decision was US$2150 and size of population impacted over 10 years was 308,000. The value of improved information on overall survival was US$105 million, quality of life US$37 million and test performance US$71 million. Conducting a randomized clinical trial of breast cancer tumor markers appears to offer a good societal return on investment. Retrospective analyses to assess test performance and evaluation of patient quality of life using tumor markers may also offer valuable areas of research. However, alternative investments may offer even better returns in investments and, as such, the trial concept deserves further study as part of an overall research-portfolio evaluation.

  8. Show me the goods: The warranting effect of user-generated photographs in online auctions

    NARCIS (Netherlands)

    Johnson, B.K.; Vang, M.H.; van der Heide, B.

    2015-01-01

    Consumers using online auction websites face the challenge of appraising products at a distance. Sellers and buyers in online auctions navigate this challenge by displaying and evaluating various cues, a critical one being use of photographs. Warranting theory predicts that cues less subject to

  9. Studies of jet fuel additives using the quartz crystal microbalance and pressure monitoring at 140 C

    Energy Technology Data Exchange (ETDEWEB)

    Zabarnick, S.; Grinstead, R.R. [Univ. of Dayton Research Institute, OH (United States)

    1995-05-01

    The quartz crystal microbalance (QCM) and pressure monitoring are used for the evaluation of jet fuel additives for the improvement of jet fuel thermal stability. The mechanisms of additive behavior are determined by measuring the time dependent deposition with the QCM and oxidation by pressure measurements. Studies at various additive concentrations permits the determination of optimum additive concentrations. Additive packages made of mixtures of antioxidants, detergent/dispersants, and metal deactivators are shown to yield good improvements in thermal stability over a wide range of jet fuel types.

  10. Rheological behavior study of a clay-polymer mixture: effects of the polymer addition

    International Nuclear Information System (INIS)

    Benchabane, A.

    2006-11-01

    The aim of the present work is to establish a bibliographical synthesis on the microstructure, the colloidal and rheological characterization of bentonite suspensions with and without polymer/surfactant addition; to lead to a rheological characterization of clay-additive mixtures and to understand the interaction between the clay particles and polymer/surfactants. Different experimental measurements: rheology, particle sizing, and x-ray diffraction were used to study the rheological character of the water-bentonite-anionic additive mixtures (CMC, SDS, xanthane) as well as the nature of the particle-particle interactions and particle-additive. The modeling part led to the adoption of Tiu and Boger's model to predict the thixotropy of the bentonite suspensions without additive. Thus, a new model is proposed with physical parameters for a better correlation of the rheological behavior of the various studied mixtures. (author)

  11. A study on the development of risk perception concerning food additives

    OpenAIRE

    臼井, 宗一

    2014-01-01

    In order to study the development process of risk perception concerning food additives, a sur vey was conducted with female college students (sophomores) for sources of information that made them feel insecure about food additives. The main source of the information when they were in infancy and at elementar y school was found to be family (mostly mother); that was teachers when they were at middle school and high school, and that was ...

  12. Learning a Language and Studying Content in an Additional Language: Student Opinions

    Science.gov (United States)

    Ger, Ugur; Bahar, Mustafa

    2018-01-01

    This study aims to understand the opinions of middle school and high school students about language learning and studying other content in an additional language in the school settings where English is used as the medium of instruction to teach more than 50% of the curriculum. For this end, 261 students from three different schools were…

  13. Differentiation study of porous hydroxyapatite body fabricated by using three different additives

    International Nuclear Information System (INIS)

    Cik Rohaida Che Hak; Idris Besar; Rusnah Mustaffa; Mohd Reusmaazran Yusof

    2005-01-01

    Porous hydroxyapatite is suitable for bone surgery applications because it allows bone ingrowth and promotes faster healing. In this study, a porous hydroxyapatite body was fabricated by slip casting route, followed by a comprehensive investigation of its physical properties. The porous body was prepared by mixing the hydroxyapatite slurry with three different additives namely; sago beads, potassium oleate and sodium dodecyl sulphate (SDS). The mixture of slurry and additives was then casted in plaster mold before it was dried and sintered at high temperature. The structure of the porous body could be tailored by using different composition and parameters of the additives; sago beads (pore former agent), potassium oleate (foaming agent) and SDS (foaming agent). The role of these three additives was investigated by several chemical, physical and mechanical evaluations method. The identification of additives was determined by FTIR, the porosity of porous hydroxyapatite was measured by Densitometer and the morphology of the porous structure was observed under Scanning Electron Microscopy and Image Analyzer. The results showed that potassium oleate contribute significantly towards porosity. However the resulting porosity would actually very dependent on the proportions of the additives, the more additives being added, the higher the porosity. All three additives produced macrostructure with pores larger than 100 mm, however the one produced by using sago beads showed a less pore interconnection structure compared to those obtained by both foaming agent. Playing with different proportions of these additives, it was possible to improve the foam stability, size of pores and pore connectivity in order to reproduce the porous hydroxyapatite body that having a similar pore structure of the natural bone. (Author)

  14. Diagnosing true virtue? Remote scenarios, warranted virtue attributions, and virtuous medical practice.

    Science.gov (United States)

    Oakley, Justin

    2016-02-01

    Immanuel Kant argues in the Foundations that remote scenarios are diagnostic of genuine virtue. When agents commonly thought to have a particular virtue fail to exhibit that virtue in an extreme situation, he argues, they do not truly have the virtue at all, and our propensities to fail in such ways indicate that true virtue might never have existed. Kant's suggestion that failure to show, say, courage in extraordinary circumstances necessarily silences one's claim to have genuine courage seems to rely on an implausibly demanding standard for warranted virtue attributions. In contrast to this approach, some philosophers-such as Robert Adams and John Doris-have argued for probabilistic accounts of warranted virtue attributions. But despite the initial plausibility of such accounts, I argue that a sole reliance on probabilistic approaches is inadequate, as they are insufficiently sensitive to considerations of credit and fault, which emerge when agents have developed various insurance strategies and protective capacities against their responding poorly to particular eventualities. I also argue that medical graduates should develop the sorts of virtuous dispositions necessary to protect patient welfare against various countervailing influences (even where such influences might be encountered only rarely), and that repeated failures to uphold the proper goals of medicine in emergency scenarios might indeed be diagnostic of whether an individual practitioner does have the relevant medical virtue. In closing, I consider the dispositions involved in friendship. I seek to develop a principled way of determining when remote scenarios can be illuminating of genuine friendship and genuine virtue.

  15. Studies on Juice Quality Obtained from Pomegranate and Various Vegetables Additions

    Directory of Open Access Journals (Sweden)

    Anamaria Pop

    2014-05-01

    Full Text Available Nowadays, the interest in antioxidants, mainly present in fruits and vegetables, has prompted research in the field of commercial beverages. Taking into account new requirements to improve the quality of feeding behaviour by getting juices without added sugar, the consumer health benefits and high organoleptics properties, it was decided to study the correlation quality of raw pomegranates with other vegetables such as celery, carrot and sharon fruit in order to obtain pomegranate juice with vegetable additions. The vegetable raw materials were chosen in order to improve the quality and organoleptic properties of the pomegranate juice with vegetable additions by optimizing the “in-house” method, to obtaining a stable formulation. The main objectives of the study were characterization of raw and addition materials, studied by psycho-chemical analysis, evaluating of the antioxidant capacity of 4 types of pomegranate juice with additions in different proportions,  establish the best type of mixture juice. Consumer preference was established in sensory analysis  based on hedonic test with 9 point scale, the type of juice with additions with the following concentrations: pomegranate 50%, Sharon 10%, celery 30%, carrot 10%. Positive correlations were performed between antioxidant capacity and type of juice preferred by consumers.

  16. Oxidative addition of aryl chlorides to monoligated palladium(0): A DFT-SCRF study

    DEFF Research Database (Denmark)

    Ahlquist, Mårten Sten Gösta; Norrby, Per-Ola

    2007-01-01

    Oxidative addition of aryl chlorides to palladium has been investigated by hybrid density functional theory methods (B3LYP), including a continuum model describing the solvent implicitly. A series of para-substituted aryl chlorides were studied to see the influence of electronic effects...

  17. The Importance of Additive Reasoning in Children's Mathematical Achievement: A Longitudinal Study

    Science.gov (United States)

    Ching, Boby Ho-Hong; Nunes, Terezinha

    2017-01-01

    This longitudinal study examines the relative importance of counting ability, additive reasoning, and working memory in children's mathematical achievement (calculation and story problem solving). In Hong Kong, 115 Chinese children aged 6 years old participated in 2 waves of assessments (T1 = first grade and T2 = second grade). Multiple regression…

  18. Anatomically ordered tapping interferes more with one-digit addition than two-digit addition: a dual-task fMRI study.

    Science.gov (United States)

    Soylu, Firat; Newman, Sharlene D

    2016-02-01

    Fingers are used as canonical representations for numbers across cultures. In previous imaging studies, it was shown that arithmetic processing activates neural resources that are known to participate in finger movements. Additionally, in one dual-task study, it was shown that anatomically ordered finger tapping disrupts addition and subtraction more than multiplication, possibly due to a long-lasting effect of early finger counting experiences on the neural correlates and organization of addition and subtraction processes. How arithmetic task difficulty and tapping complexity affect the concurrent performance is still unclear. If early finger counting experiences have bearing on the neural correlates of arithmetic in adults, then one would expect anatomically and non-anatomically ordered tapping to have different interference effects, given that finger counting is usually anatomically ordered. To unravel these issues, we studied how (1) arithmetic task difficulty and (2) the complexity of the finger tapping sequence (anatomical vs. non-anatomical ordering) affect concurrent performance and use of key neural circuits using a mixed block/event-related dual-task fMRI design with adult participants. The results suggest that complexity of the tapping sequence modulates interference on addition, and that one-digit addition (fact retrieval), compared to two-digit addition (calculation), is more affected from anatomically ordered tapping. The region-of-interest analysis showed higher left angular gyrus BOLD response for one-digit compared to two-digit addition, and in no-tapping conditions than dual tapping conditions. The results support a specific association between addition fact retrieval and anatomically ordered finger movements in adults, possibly due to finger counting strategies that deploy anatomically ordered finger movements early in the development.

  19. Sequential neural processes in abacus mental addition: an EEG and FMRI case study.

    Science.gov (United States)

    Ku, Yixuan; Hong, Bo; Zhou, Wenjing; Bodner, Mark; Zhou, Yong-Di

    2012-01-01

    Abacus experts are able to mentally calculate multi-digit numbers rapidly. Some behavioral and neuroimaging studies have suggested a visuospatial and visuomotor strategy during abacus mental calculation. However, no study up to now has attempted to dissociate temporally the visuospatial neural process from the visuomotor neural process during abacus mental calculation. In the present study, an abacus expert performed the mental addition tasks (8-digit and 4-digit addends presented in visual or auditory modes) swiftly and accurately. The 100% correct rates in this expert's task performance were significantly higher than those of ordinary subjects performing 1-digit and 2-digit addition tasks. ERPs, EEG source localizations, and fMRI results taken together suggested visuospatial and visuomotor processes were sequentially arranged during the abacus mental addition with visual addends and could be dissociated from each other temporally. The visuospatial transformation of the numbers, in which the superior parietal lobule was most likely involved, might occur first (around 380 ms) after the onset of the stimuli. The visuomotor processing, in which the superior/middle frontal gyri were most likely involved, might occur later (around 440 ms). Meanwhile, fMRI results suggested that neural networks involved in the abacus mental addition with auditory stimuli were similar to those in the visual abacus mental addition. The most prominently activated brain areas in both conditions included the bilateral superior parietal lobules (BA 7) and bilateral middle frontal gyri (BA 6). These results suggest a supra-modal brain network in abacus mental addition, which may develop from normal mental calculation networks.

  20. Study of Trehalose Addition on Aroma Retention in Dehydrated Strawberry Puree

    Directory of Open Access Journals (Sweden)

    Draženka Komes

    2003-01-01

    Full Text Available In order to improve the quality of dehydrated fruit products, the influence of the addition of two sugars (sucrose and trehalose on the retention of aroma components during dehydration of strawberry puree was investigated. Manual headspace solid-phase microextraction (SPME, containing polydimethylsiloxane coated fibre (100 μm coupled with gas chromatography (GC-FID and GC-MS was used for the analysis of the aroma of strawberry puree dehydrated by using freeze drying and foam-mat drying. The analytes identified included esters, carbonyl compounds, terpenoids, several alcohols and acids. The results obtained in this study give further insight into the mechanisms concerning the application of trehalose as flavouring additive, due to its ability to retain and preserve the fruit volatiles responsible for the characteristic flavour of fresh fruits during dehydration processes. The best retention of aroma components in dehydrated strawberry puree was obtained by trehalose addition when combined with freeze drying.

  1. Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

    2010-12-29

    This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release with unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway

  2. Tribological study on rapeseed oil with nano-additives in close contact sliding situation

    Science.gov (United States)

    Gupta, Rajeev Nayan; Harsha, A. P.; Singh, Sagar

    2018-02-01

    The present work deals with the tribological evaluation of three types of nano-additives, i.e., copper oxide (CuO; ≈ 151.2 nm), cerium oxide (CeO2; ≈ 80 nm) and polytetrafluoroethylene (PTFE; ≈ 90.4 nm) with rapeseed oil under steel-steel sliding contacts. The nano-additives concentrations in the base oil were 0.1, 0.25 and 0.5% w/v for the lubricant formulation. Further, the rapeseed oil was also epoxidized by a chemical method and the tribological behavior was compared with the base oil (unmodified oil) at similar nano-additives concentrations. The ASTM standards were followed for the study of wear preventive and extreme-pressure analysis of nanolubricants, and it was carried out using four-ball tester. In the antiwear test, CeO2 and PTFE nano-additives have shown the significant reduction in the wear scar diameter at the concentration of 0.1% w/v. In the extreme-pressure test, 0.5% w/v concentration was optimum for oxide nanoparticles; however, PTFE nanoparticles did not show positive effect with both the base oils. Different characterization techniques were employed to confirm the oil modification and for the study of the worn surfaces.

  3. Geometrical accuracy of metallic objects produced with additive or subtractive manufacturing: A comparative in vitro study.

    Science.gov (United States)

    Braian, Michael; Jönsson, David; Kevci, Mir; Wennerberg, Ann

    2018-04-06

    To evaluate the accuracy and precision of objects produced by additive manufacturing systems (AM) for use in dentistry and to compare with subtractive manufacturing systems (SM). Ten specimens of two geometrical objects were produced by five different AM machines and one SM machine. Object A mimics an inlay-shaped object, while object B imitates a four-unit bridge model. All the objects were sorted into different measurement dimensions (x, y, z), linear distances, angles and corner radius. None of the additive manufacturing or subtractive manufacturing groups presented a perfect match to the CAD file with regard to all parameters included in the present study. Considering linear measurements, the precision for subtractive manufacturing group was consistent in all axes for object A, presenting results of additive manufacturing groups had consistent precision in the x-axis and y-axis but not in the z-axis. With regard to corner radius measurements, the SM group had the best overall accuracy and precision for both objects A and B when compared to the AM groups. Within the limitations of this in vitro study, the conclusion can be made that subtractive manufacturing presented overall precision on all measurements below 0.050mm. The AM machines also presented fairly good precision, additive techniques are now being implemented. Thus all these production techniques need to be tested, compared and validated. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

  4. Experimental Study of Hydrogen Addition Effects on a Swirl-Stabilized Methane-Air Flame

    Directory of Open Access Journals (Sweden)

    Mao Li

    2017-11-01

    Full Text Available The effects of H2 addition on a premixed methane-air flame was studied experimentally with a swirl-stabilized gas turbine model combustor. Experiments with 0%, 25%, and 50% H2 molar fraction in the fuel mixture were conducted under atmospheric pressure. The primary objectives are to study the impacts of H2 addition on flame lean blowout (LBO limits, flame shapes and anchored locations, flow field characteristics, precessing vortex core (PVC instability, as well as the CO emission performance. The flame LBO limits were identified by gradually reducing the equivalence ratio until the condition where the flame physically disappeared. The time-averaged CH chemiluminescence was used to reveal the characteristics of flame stabilization, e.g., flame structure and stabilized locations. In addition, the inverse Abel transform was applied to the time-averaged CH results so that the distribution of CH signal on the symmetric plane of the flame was obtained. The particle image velocimetry (PIV was used to detect the characteristics of the flow field with a frequency of 2 kHz. The snapshot method of POD (proper orthogonal decomposition and fast Fourier transform (FFT were adopted to capture the most prominent coherent structures in the turbulent flow field. CO emission was monitored with an exhaust probe that was installed close to the combustor exit. The experimental results indicated that the H2 addition extended the flame LBO limits and the operation range of low CO emission. The influence of H2 addition on the flame shape, location, and flow field was observed. With the assistance of POD and FFT, the combustion suppression impacts on PVC was found.

  5. A study of the components of an active substance of high alkaline alkylsalicylate oil additives

    Energy Technology Data Exchange (ETDEWEB)

    Kravchuk, G G; Glavati, O L; Glavati, Ye V; Zhurba, A S

    1981-01-01

    The active substance of aklylsalicylate additives (Pr) MACK, dispersal-1 and AS-6OC (from Shell Oil) is isolated and studied. It is shown that the Pr is provided by the presence of both a neutral salicylate, as well as that of a high alkaline component (colloid CaCtheta/sub 3/, stabilized by salicylate). The free alkylphenols present in the Pr do not deteriorate its quality.

  6. Comparative study of conventional therapy and additional yogasanas for knee rehabilitation after total knee arthroplasty

    Directory of Open Access Journals (Sweden)

    Nilima Bedekar

    2012-01-01

    Full Text Available Background: Amongst various modalities of post operative rehabilitation in a total knee replacement (TKR surgery, this study focuses on evaluating the effect of additional yoga therapy on functional outcome of TKR patients. Materials and Methods: A comparative study was done to compare the effects of conventional physiotherapy and additional yoga asanas, on 56 patients undergoing total knee arthroplasty due to osteoarthritis. After obtaining written informed consent, the patients were alternately assigned to two groups: Conventional and experimental. Baseline WOMAC scores for pain and stiffness were taken on third post operative day. The subjects in conventional group received physiotherapy rehabilitation program of Sancheti Institute where the study was conducted, the experimental group received additional modified yoga asanas once daily by the therapist. After discharge from the hospital, patients were provided with written instructions and photographs of the asanas, two sets of WOMAC questionnaire with stamped and addressed envelopes and were instructed to perform yoga asanas 3 days/week. Subjects filled the questionnaire after 6 weeks and 3 months from the day of surgery and mailed back. The primary outcome measure was WOMAC questionnaire which consists of 24 questions, each corresponding to a visual analog scale, designed to measure patient′s perception of pain, stiffness and function. Results: The results suggest that there was a significant change (P<0.05 for all the groups for pain, stiffness and function subscales of WOMAC scale. The pain and stiffness was found to be less in experimental group receiving additional yoga therapy than in conventional group on 3 rd post operative day, 6 weeks and 3 months after the surgery. Conclusion: A combination of physiotherapy and yoga asana protocol works better than only physiotherapy protocol. Larger and blinded study is needed.

  7. A case control study of possible additional risk factors for chronic alcoholic pancreatitis

    OpenAIRE

    Sri Vengadesh Gopal; Ashley Solomon; Jaahnavi Konidala

    2016-01-01

    Background: Chronic pancreatitis (CP) is characterised by irreversible damage to pancreas leading to endocrine and exocrine insufficiency with considerable morbidity. Etiopathogenesis is multifactorial with interplay between genetics and environmental toxins. Alcoholism is more commonly associated with chronic pancreatitis. But it is not very clear why only certain proportion of the alcoholics develop pancreatitis. So this study was conducted to find the possible additional risk factors inv...

  8. Positron annihilation study of yttria-stabilized zirconia nanopowders containing Cr2O3 additive

    International Nuclear Information System (INIS)

    Prochazka, I; Cizek, J; Melikhova, O; Kuriplach, J; Konstantinova, T E; Danilenko, I A

    2011-01-01

    Yttria-stabilized zirconia compacted nanopowders, doped with trivalent chromium oxide, were studied by means of high-resolution positron lifetime and coincidence Doppler broadening techniques. The observed data suggest that positrons annihilate mainly in vacancylike defects at grain boundaries or in larger open volumes most likely located at triple points. The results also show that an addition of Cr 2 O 3 leads to a decrease in grain size.

  9. A comparative study of additive and subtractive manufacturing for dental restorations.

    Science.gov (United States)

    Bae, Eun-Jeong; Jeong, Il-Do; Kim, Woong-Chul; Kim, Ji-Hwan

    2017-08-01

    Digital systems have recently found widespread application in the fabrication of dental restorations. For the clinical assessment of dental restorations fabricated digitally, it is necessary to evaluate their accuracy. However, studies of the accuracy of inlay restorations fabricated with additive manufacturing are lacking. The purpose of this in vitro study was to evaluate and compare the accuracy of inlay restorations fabricated by using recently introduced additive manufacturing with the accuracy of subtractive methods. The inlay (distal occlusal cavity) shape was fabricated using 3-dimensional image (reference data) software. Specimens were fabricated using 4 different methods (each n=10, total N=40), including 2 additive manufacturing methods, stereolithography apparatus and selective laser sintering; and 2 subtractive methods, wax and zirconia milling. Fabricated specimens were scanned using a dental scanner and then compared by overlapping reference data. The results were statistically analyzed using a 1-way analysis of variance (α=.05). Additionally, the surface morphology of 1 randomly (the first of each specimen) selected specimen from each group was evaluated using a digital microscope. The results of the overlap analysis of the dental restorations indicated that the root mean square (RMS) deviation observed in the restorations fabricated using the additive manufacturing methods were significantly different from those fabricated using the subtractive methods (Padditive manufacturing methods (P=.466). Similarly, no significant differences were found between wax and zirconia, the subtractive methods (P=.986). The observed RMS values were 106 μm for stereolithography apparatus, 113 μm for selective laser sintering, 116 μm for wax, and 119 μm for zirconia. Microscopic evaluation of the surface revealed a fine linear gap between the layers of restorations fabricated using stereolithography apparatus and a grooved hole with inconsistent weak scratches

  10. A study on the applications of AI in finishing of additive manufacturing parts

    Science.gov (United States)

    Fathima Patham, K.

    2017-06-01

    Artificial intelligent and computer simulation are the technological powerful tools for solving complex problems in the manufacturing industries. Additive Manufacturing is one of the powerful manufacturing techniques that provide design flexibilities to the products. The products with complex shapes are directly manufactured without the need of any machining and tooling using Additive Manufacturing. However, the main drawback of the components produced using the Additive Manufacturing processes is the quality of the surfaces. This study aims to minimize the defects caused during Additive Manufacturing with the aid of Artificial Intelligence. The developed AI system has three layers, each layer is trying to eliminate or minimize the production errors. The first layer of the AI system optimizes the digitization of the 3D CAD model of the product and hence reduces the stair case errors. The second layer of the AI system optimizes the 3D printing machine parameters in order to eliminate the warping effect. The third layer of AI system helps to choose the surface finishing technique suitable for the printed component based on the Degree of Complexity of the product and the material. The efficiency of the developed AI system was examined on the functional parts such as gears.

  11. Study of Ni/Si(1 0 0) solid-state reaction with Al addition

    International Nuclear Information System (INIS)

    Huang Yifei; Jiang Yulong; Ru Guoping; Li Bingzong

    2008-01-01

    The characteristics of Ni/Si(1 0 0) solid-state reaction with Al addition (Ni/Al/Si(1 0 0), Ni/Al/Ni/Si(1 0 0) and Al/Ni/Si(1 0 0)) is studied. Ni and Al films were deposited on Si(1 0 0) substrate by ion beam sputtering. The solid-state reaction between metal films and Si was performed by rapid thermal annealing. The sheet resistance of the formed silicide film was measured by four-point probe method. The X-ray diffraction (XRD) was employed to detect the phases in the silicide film. The Auger electron spectroscopy was applied to reveal the element profiles in depth. The influence of Al addition on the Schottky barrier heights of the formed silicide/Si diodes was investigated by current-voltage measurements. The experimental results show that NiSi forms even with the addition of Al, although the formation temperature correspondingly changes. It is revealed that Ni silicidation is accompanied with Al diffusion in Ni film toward the film top surface and Al is the dominant diffusion species in Ni/Al system. However, no Ni x Al y phase is detected in the films and no significant Schottky barrier height modulation by the addition of Al is observed

  12. Study of sodium combustion and fire extinction by pulverized substances. Role of additives

    International Nuclear Information System (INIS)

    Reuillon, Marcelline.

    1976-01-01

    A study is presented on inflammation and combustion of liquid sodium, extinction of the metal fires by comburant concentration reducing and cooling, liquid covering, powder smothering. The role of the additives is discussed. The setting up and the experimental process are given. The sodium combustion residues are analyzed. Various powder mixtures based on alkaline carbonates, NaCl-Na 2 CO 3 , NaCl-Na 2 CO 3 ,H 2 O etc... are studied. An attempt of interpretation on sodium fire extinction is presented [fr

  13. Study of the reduction mechanism of ironsands with addition of blast furnace bag dust

    Science.gov (United States)

    Xing, Xiangdong; Chen, Yunfei; Liu, Yiran

    2018-02-01

    To improve the reduction properties of ironsands carbon-containing briquettes, the behavior of ironsand during reduction by the addition of blast furnace bag dust (BFBD) is studied using a high temperature resistance furnace, X-ray diffraction (XRD) analysis and scanning electron microscopy. Additionally, the reduction mechanism is discussed in this study. The results showed that the reduction level and compressive strength of ironsand carbon-containing briquettes could be promoted by increasing the proportion of BFBD. When the addition rate of BFBD was 31.25%, the metallization rate and compressive strength increased from 82.1% and 21.5 N/a to 91.4% and 172.5 N/a, respectively. Metallic iron reduced from BFBD particles favored the carbon gasification reaction, which enhanced the internal CO concentration, and then promoted the FeTiO3 reduction to Fe in ironsand. Meanwhile, a large amount of the liquid phase generated during the reduction process also favored Fe2+ diffusion, spread of iron joined crystals and the growth of crystals, which resulted in the improvement of the compressive strength of the ironsand carbon-containing briquettes.

  14. Studies on effect of additives on protein profile, microstructure and quality characteristics of pasta.

    Science.gov (United States)

    Purnima, C; Ramasarma, P R; Prabhasankar, P

    2012-02-01

    Wheat storage proteins play a vital role in pasta making quality. In the present study, SDS-PAGE, Gel filtration chromatography and Scanning electron microscopy techniques were employed to understand the changes in the wheat protein fractions and their interactions with additives namely Sodium Steroyl Lactate (SSL), Glycerol Monostearate (GMS) and Hydroxy Propyl Methyl Cellulose (HPMC) during processing of pasta. SDS-PAGE studies indicated changes in High Molecular Weight Glutenin (HMW) fractions during drying stages of pasta preparation and in cooked pasta samples. In uncooked pasta, gel filtration patterns showed four peaks corresponding to different storage proteins whereas in the case of cooked pasta, these peaks were merged into three peaks. Pasta quality characteristics studies indicated that pasta with HPMC was found to have minimum percentage of cooking loss (5.6%), increased cooked weight (82 g), firmness (2.97 N) and high overall quality score (27) than GMS, SSL and control. Microstructure studies confirm the beneficial effect of HPMC. The present study indicated that HPMC is better additive for pasta manufacture followed by GMS. This could be due to interaction of HPMC with starch and protein matrix is different from that of GMS and SSL.

  15. Advanced Material Studies for Additive Manufacturing in terms of Future Gear Application

    Directory of Open Access Journals (Sweden)

    Jan Bräunig

    2014-06-01

    Full Text Available Additive manufacturing by laser beam melting is predestined for complex component geometry like integrated cooling channels without enormous posttreatment processing. To investigate the influence of build-up direction in terms of later tooth excitation of gear-wheels, first fundamental material analyses were accomplished in this publication. Therefore, additively produced specimens were used to determine the build-up direction dependent elastic properties of the material in all three spatial directions based on tensile and torsion tests. The anisotropies of elastic limits and breaking points of previous studies were confirmed in this paper. Furthermore, torsion values were also determined depending on build-up direction. Laser beam melted X3NiCoMoTi18-9-5 (hot-work tool steel was shown to exhibit extremely high performance under shear loading in comparison to conventionally processed steel. The influence of build-up direction on torsional strength was also shown.

  16. The Additive Risk Model for Estimation of Effect of Haplotype Match in BMT Studies

    DEFF Research Database (Denmark)

    Scheike, Thomas; Martinussen, T; Zhang, MJ

    2011-01-01

    leads to a missing data problem. We show how Aalen's additive risk model can be applied in this setting with the benefit that the time-varying haplomatch effect can be easily studied. This problem has not been considered before, and the standard approach where one would use the expected-maximization (EM......) algorithm cannot be applied for this model because the likelihood is hard to evaluate without additional assumptions. We suggest an approach based on multivariate estimating equations that are solved using a recursive structure. This approach leads to an estimator where the large sample properties can...... be developed using product-integration theory. Small sample properties are investigated using simulations in a setting that mimics the motivating haplomatch problem....

  17. A study on the mechanical properties of additive manufactured polymer materials

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Bum; Lee, In Hwan; Cho, Hae Yong [Dept. of Mechanical Engineering, Chungbuk National University, Cheongju (Korea, Republic of)

    2015-08-15

    Traditionally, additive manufacturing (AM) technology has been used to fabricate prototypes in the early development phase of a product. This technology is being applied to release manufacturing of a product because of its low cost and fast fabrication. AM technology is a process of joining materials to fabricate a product from the 3D CAD data in a layer-by-layer manner. The orientation of a layer during manufacturing can affect the mechanical properties of the product because of its anisotropy. In this paper, tensile testing of polymer-based specimens were built with a typical AM process (FDM, PolyJet and SLA) to study the mechanical properties of the AM materials. The ASTM D 638 tensile testing standard was followed for building the specimens. The mechanical properties of the specimens were determined on the basis of stress-strain curves formed by tensile tests. In addition, the fracture surfaces of the specimens were observed by SEM to analyze the results.

  18. Romanian Consumers’ Willingness to Buy Foodstuffs Containing Food Additives: Results of a Conjoint Study

    Directory of Open Access Journals (Sweden)

    Viktória Szucs

    2015-11-01

    Full Text Available Results of the literature and the authors’ previous studies showed consumers’ high anxiety regarding food additives as well as their high demand for additive-free products in Romania, even at higher prices. Hence, the aim of our work was to analyse the willingness to buy and preference of foodstuffs containing natural and artificial food additives in Romania.A complex conjoint analysis (rating-based and choice-based was performed amongst Romanian consumers. Conjoint cards were created from two groups of food additives (‘preservatives’ and ‘packaging gases’, and consisting of two ‘model foodstuffs’ (pre-packed sliced cheese and chips. For the study, three factors were selected: ‘preservatives’ (artificial/natural, ‘packaging gases’ (contains/does not contain and ‘price’ (average+10%/average+20%. Results were collected via the internet and data were analysed with the help of SPSS Conjoint and XLSTAT softwares. ‘Preservatives’ have a dominant importance and ‘natural preservatives’ have a high utility in shopping decisions. ‘Natural’ compounds have higher importance in the example of foodstuffs thought to contain less food additives (pre-packed sliced cheese, while the presence of ‘packaging gases’ is acceptable to respondents in easy to handle and convenient foodstuffs. With the help of the cluster analysis, the promising target group (‘desire for natural’ characterising additive-free foodstuffs  that contain natural compounds was identified. Restricted comparison of the rating-based and the choice-based analysis showed that the choice-based method was easier to handle and understand for the participants. Regarding the results, a threefold conclusion was established: the ‘prominence effect’ is greater for the choice-based than the rating-based analysis; the effect of ‘level focusing’ is smaller in the rating-based than in the choice-based analysis; the ‘compatibility effect’ the rating

  19. Effect of Exogenous Phytase Addition on Soil Phosphatase Activities: a Fluorescence Spectroscopy Study.

    Science.gov (United States)

    Yang, Xiao-zhu; Chen, Zhen-hua; Zhang, Yu-lan; Chen, Li-jun

    2015-05-01

    The utilization of organic phosphorus (P) has directly or indirectly improved after exogenous phytase was added to soil. However, the mechanism by which exogenous phytase affected the soil phosphatases (phosphomonoesterase and phosphodiesterase) activities was not clear. The present work was aimed to study red soil, brown soil and cinnamon soil phosphomonoesterase (acid and alkaline) (AcP and AlP) and phosphodiesterase (PD) activities responding to the addition of exogenous phytase (1 g phytase/50 g air dry soil sample) based on the measurements performed via a fluorescence detection method combined with 96 microplates using a TECAN Infinite 200 Multi-Mode Microplate Reader. The results indicated that the acid phosphomonoesterase activity was significantly enhanced in red soil (p≤0. 01), while it was significantly reduced in cinnamon soil; alkaline phosphomonoesterase activity was significantly enhanced in cinnamon soil (p≤ 0. 01), while it was significantly reduced in red soil; phosphodiesterase activity was increased in three soils but it was significantly increased in brown soil (p≤0. 01) after the addition of exogenous phytase. The activities still remained strong after eight days in different soils, which indicated that exogenous phytase addition could be enhance soil phosphatases activities effectively. This effect was not only related to soil properties, such as pH and phosphorus forms, but might also be related to the excreted enzyme amount of the stimulating microorganism. Using fluorescence spectroscopy to study exogenous phytase addition influence on soil phosphatase activities was the first time at home and abroad. Compared with the conventional spectrophotometric method, the fluorescence microplate method is an accurate, fast and simple to use method to determine the relationships among the soil phosphatases activities.

  20. Carotid sinus hypersensitivity: Entity warrants a caution in the critical care unit

    Directory of Open Access Journals (Sweden)

    Sugata Dasgupta

    2016-01-01

    Full Text Available Carotid sinus hypersensitivity (CSH syndrome is an entity caused by an overreaction of the carotid sinus baroreceptors to stimulation. Three subtypes of CSH syndrome are recognized according to the response to carotid sinus massage (CSM: Predominantly cardioinhibitory, predominantly vasodepressor and a mixed subtype. We report here the case of a middle-aged female patient admitted in our critical care unit with respiratory failure requiring mechanical ventilation. There were episodes of severe bradycardia whenever her head was rotated to any side, relieved on neutralizing head position and administering intravenous atropine. CSM revealed she had predominantly cardioinhibitory type of CSH syndrome. A cardioinhibitory form of hypersensitive carotid sinus reflex, which is idiopathic in causation, probably explains the severe bradycardia on head rotation seen in our patient. A heightened awareness of this syndrome is necessary for timely diagnosis and management. CSH syndrome results from an overreaction of the carotid sinus baroreceptors to stimulation, manifesting commonly as bradycardia, hypotension and syncope. It is an entity, which warrants caution during routine critical care practices.

  1. Hydrogen atom addition to the surface of graphene nanoflakes: A density functional theory study

    Energy Technology Data Exchange (ETDEWEB)

    Tachikawa, Hiroto, E-mail: hiroto@eng.hokudai.ac.jp

    2017-02-28

    Highlights: • The reaction pathway of the hydrogen addition to graphene surface was determined by the DFT method. • Binding energies of atomic hydrogen to graphene surface were determined. • Absorption spectrum of hydrogenated graphene was theoretically predicted. • Hyperfine coupling constant of hydrogenated graphene was theoretically predicted. - Abstract: Polycyclic aromatic hydrocarbons (PAHs) provide a 2-dimensional (2D) reaction surface in 3-dimensional (3D) interstellar space and have been utilized as a model of graphene surfaces. In the present study, the reaction of PAHs with atomic hydrogen was investigated by means of density functional theory (DFT) to systematically elucidate the binding nature of atomic hydrogen to graphene nanoflakes. PAHs with n = 4–37 were chosen, where n indicates the number of benzene rings. Activation energies of hydrogen addition to the graphene surface were calculated to be 5.2–7.0 kcal/mol at the CAM-B3LYP/6-311G(d,p) level, which is almost constant for all PAHs. The binding energies of hydrogen atom were slightly dependent on the size (n): 14.8–28.5 kcal/mol. The absorption spectra showed that a long tail is generated at the low-energy region after hydrogen addition to the graphene surface. The electronic states of hydrogenated graphenes were discussed on the basis of theoretical results.

  2. Combinatorial study of NaF addition in CIGSe films for high efficiency solar cells

    KAUST Repository

    Eid, Jessica; Liang, Haifan; Gereige, Issam; Lee, Sang; Van Duren, Jeroen K J

    2013-01-01

    We report on a sodium fluoride (NaF) thickness variation study for the H2Se batch furnace selenization of sputtered Cu(In,Ga) films in a wide range of Cu(In,Ga) film compositions to form Cu(In,Ga)Se2 (CIGSe) films and solar cells. Literature review indicates lack of consensus on the mechanisms involved in Na altering CIGSe film properties. In this work, for sputtered and batch-selenized CIGSe, NaF addition results in reduced gallium content and an increase in grain size for the top portion of the CIGSe film, as observed by scanning electron microscopy and secondary ion mass spectrometry. The addition of up to 20nm of NaF resulted in an improvement in all relevant device parameters: open-circuit voltage, short-circuit current, and fill factor. The best results were found for 15nm NaF addition, resulting in solar cells with 16.0% active-area efficiency (without anti-reflective coating) at open-circuit voltage (VOC) of 674mV. © 2013 John Wiley & Sons, Ltd.

  3. Combinatorial study of NaF addition in CIGSe films for high efficiency solar cells

    KAUST Repository

    Eid, Jessica

    2013-12-04

    We report on a sodium fluoride (NaF) thickness variation study for the H2Se batch furnace selenization of sputtered Cu(In,Ga) films in a wide range of Cu(In,Ga) film compositions to form Cu(In,Ga)Se2 (CIGSe) films and solar cells. Literature review indicates lack of consensus on the mechanisms involved in Na altering CIGSe film properties. In this work, for sputtered and batch-selenized CIGSe, NaF addition results in reduced gallium content and an increase in grain size for the top portion of the CIGSe film, as observed by scanning electron microscopy and secondary ion mass spectrometry. The addition of up to 20nm of NaF resulted in an improvement in all relevant device parameters: open-circuit voltage, short-circuit current, and fill factor. The best results were found for 15nm NaF addition, resulting in solar cells with 16.0% active-area efficiency (without anti-reflective coating) at open-circuit voltage (VOC) of 674mV. © 2013 John Wiley & Sons, Ltd.

  4. Effects of additional team-based learning on students' clinical reasoning skills: a pilot study.

    Science.gov (United States)

    Jost, Meike; Brüstle, Peter; Giesler, Marianne; Rijntjes, Michel; Brich, Jochen

    2017-07-14

    In the field of Neurology good clinical reasoning skills are essential for successful diagnosing and treatment. Team-based learning (TBL), an active learning and small group instructional strategy, is a promising method for fostering these skills. The aim of this pilot study was to examine the effects of a supplementary TBL-class on students' clinical decision-making skills. Fourth- and fifth-year medical students participated in this pilot study (static-group comparison design). The non-treatment group (n = 15) did not receive any additional training beyond regular teaching in the neurology course. The treatment group (n = 11) took part in a supplementary TBL-class optimized for teaching clinical reasoning in addition to the regular teaching in the neurology course. Clinical decision making skills were assessed using a key-feature problem examination. Factual and conceptual knowledge was assessed by a multiple-choice question examination. The TBL-group performed significantly better than the non-TBL-group (p = 0.026) in the key-feature problem examination. No significant differences between the results of the multiple-choice question examination of both groups were found. In this pilot study participants of a supplementary TBL-class significantly improved clinical decision-making skills, indicating that TBL may be an appropriate method for teaching clinical decision making in neurology. Further research is needed for replication in larger groups and other clinical fields.

  5. A study for providing additional storage spaces to ET-RR-1 spent fuel

    International Nuclear Information System (INIS)

    El-Kady, A.; Ashoub, N.; Saleh, H.G.

    1995-01-01

    The ET-RR-1 reactor spent fuel storage pool is a trapezoidal aluminum tank concrete shield and of capacity 10 m 3 . It can hold up to 60 fuel assemblies. The long operation history of the ET-RR-1 reactor resulted in a partially filled spent fuel storage with the remaining spaces not enough to host a complete load from the reactor. This work have been initiated to evaluate possible alternative solutions for providing additional storage spaces to host the available EK-10 fuel elements after irradiation and any foreseen fuel in case of reactor upgrading. Several alternate solutions have been reviewed and decision on the most suitable one is under study. These studies include criticality calculation of some suggested alternatives like reracking the present spent fuel storage pool and double tiering by the addition of a second level storage rack above the existing rack. The two levels may have different factor. Criticality calculation of the double tiering possible accident was also studied. (author)

  6. An Experimental Study on Effect of Palm – Shell Waste Additive to Cement Strenght Enhancement

    Directory of Open Access Journals (Sweden)

    Adi Novriansyah

    2017-03-01

    Full Text Available Enhancing the cement strength through attaching chemical additive has been popular to meet the required condition for a particular well-cementing job. However, due to a low oil-price phenomenon, pouring and additive should be reconsidered because it can raise the cost and make the project become uneconomic. Another additive material in nanocomposite form will be introduced through this experimental study. The nanocomposite material consist of silica nanoparticle, known as “Nanosilica” and a palm-shell-waste, which is abundant in Indonesia. Before making a nanocomposite, the palm-shell should be burned to obtain a charcoal form, ground and sieved to attain a uniform size.   The study focuses on the two parameters, compressive strength and shear bond strength, which can reflect the strength of the cement. These values are obtained by performing a biaxial loading test to the cement sample. Various samples with different concentration of nanocomposite should be prepared and following the mixing, drying, and hardening process before the loading test is carried out. The result from the test shows a positive indication for compressive strength and shear bond strength values, according to the representative well cementing standards. Increasing the nanocomposite concentration on the cement will increase these values. Furthermore, an investigation on the temperature effect confirms that the sample with 700oC burning temperature have highest compressive-strength and shear-bond-strength values. This is a potential opportunity utilizing a waste-based material to produce another product with higher economic value.

  7. Evaluation of additive effects of hydrolyzed jojoba (Simmondsia chinensis) esters and glycerol: a preliminary study.

    Science.gov (United States)

    Meyer, Jaimi; Marshall, Brooke; Gacula, Maximo; Rheins, Lawrence

    2008-12-01

    Glycerol has long served the topical prescriptive and personal care industry as a versatile and functional active and inactive ingredient. In skin care products, it acts primarily as an emollient, softening the skin through robust humectant hydration action. Hydrolyzed Jojoba Esters K-20W (K-20W) have been shown to increase skin hydration and improve sensory skin "feel" when included in a variety of skin, hair, and nail care cosmetic/personal care formulations. The addition of glycerol and hydrolyzed jojoba esters provides a substantial long-acting 24 h (moisturizing) skin hydration effect for topical products. A small pilot study was conducted to support the "proof of concept" that an enhanced, additive role exists between these two ingredients resulting in a long-term (24 h) skin moisturization effect. Topical treatments were applied to the skin (lower leg) of subjects, and evaluations were made at baseline and 8- to 24-h post-application. Skin hydration data were obtained via bio-instrumental transepidermal water loss (TEWL) measurements and expert clinical skin grading, including standardized digital clinical photography. Clinical skin grading evaluations and TEWL measurements found that significantly lower evaporative (P jojoba esters) than with glycerol alone in a standard base skin care lotion at 8 and 24 h posttreatment. This preliminary data "proof of concept" supports the position that glycerol and hydrolyzed jojoba esters work in tandem to enhance skin moisturization for at least 24 h. This unique moisturizing potential may prove valuable in the future development of cosmetic and over-the-counter/prescriptive topical products, including new medicaments containing botanicals. This fact is further reinforced with the recent greater commercial use and demand for defined safe botanicals in cosmetic as well as pharmaceutical topical formulations. Additional mechanistic studies are underway.

  8. Adsorption behavior of redox-active suppressor additives: Combined electrochemical and STM studies

    International Nuclear Information System (INIS)

    Hai, N.T.M.; Huynh, T.M.T.; Fluegel, A.; Mayer, D.; Broekmann, P.

    2011-01-01

    Highlights: → Janus Green B and safranine are prototypical redox-active leveler additives for copper electroplating. → Their redox-transitions lie within the copper potential window. → Reduced additives are identified as active species for the leveling effect. → Electro-reduction affects in particular the central aromatic cores of the additives. - Abstract: The redox chemistry and the related surface phase behavior of Safranine (SAF) and Janus Green B (JGB) have been studied by means of cyclic voltammetry in combination with in situ Scanning Tunneling Microscopy using HOPG (Highly Oriented Pyrolytic Graphite) and single crystalline Cu(1 0 0) as model substrates, both revealing different widths of the accessible potential windows. JGB and SAF serve as prototypical heterocyclic suppressor/leveler additives that are used for the metallization of 3D-TSVs (3D Through Silicon Vias) following a classical 'leveling' concept. SAF can be considered as the reductive decomposition product of JGB that is formed at the copper/electrolyte interface upon electroplating. Both additives reveal a pronounced pH-dependent redox-chemistry with redox-transitions lying close to or even beyond the anodic limit of the copper potential window. Affected by these redox-processes are in particular the aromatic cores of those heterocycles that can be (quasi)reversibly reduced by a two electron transfer process within the potential window of copper. Therefore we identify the reduced form of those dyes as the active components for the suppressing/leveling effect in copper plating. STM data clearly shows a dye surface phase behavior that is crucially determined by its potential-dependent redox-chemistry. This will be exemplarily discussed for the SAF dye. On chloride-modified Cu(1 0 0) mono-reduced SAF forms a structurally well-defined monolayer of cationic stacking polymers. However, this coupled anion/cation layer reveals only minor suppressing capabilities with respect to the copper

  9. Study of chemical additives in the cementation of radioactive waste of PWR reactors

    International Nuclear Information System (INIS)

    Vieira, Vanessa Mota; Tello, Cledola Cassia Oliveira de

    2011-01-01

    Cementation is a very useful process to solidify radioactive wastes. Depending on the waste it can be necessary to use of chemical additives (admixtures) to improve the cementation process and its product. Admixtures are materials, other than cement, aggregate and water, that are added either before or during the mixing to alter some properties, such as workability, curing temperature range, and setting time. However there are a large variety of these materials that are frequently changed or taken out of the market. In this changeable scenario it is essential to know the commercially available materials and their characteristics. In this research the effects of chemical admixtures in the solidification process has been studied. For the tests it was prepared a solution simulating the evaporator concentrate waste, cemented by two different formulations, and three chemical admixtures from two manufacturers. The tested admixtures were accelerators, set retarders and super plasticizers. The experiments were organized by a planning factorial 23 to quantify the effects of formulations, of the admixtures, its quantity and manufacturer in properties of the paste and products. The measured parameters were the density, the viscosity and the setting time of the paste, and the product compressive strength. The parameter evaluated in this study was the compressive strength at age of 28 days, is considered essential security issues relating to the handling, transport and storage of cemented waste product. The results showed that the addition of accelerators improved the compressive strength of the cemented products. (author)

  10. Study of chemical additives in the cementation of radioactive waste of PWR reactors

    International Nuclear Information System (INIS)

    Vieira, Vanessa Mota; Tello, Cledola Cassia Oliveira de

    2012-01-01

    In this research it has been studied the effects of chemical admixtures in the cementation process of radioactive wastes. These additives are used to improve the properties of waste cementation process, both of the paste and of the solidified product. However there are a large variety of these materials that are frequently changed or taken out of the market. Then it is essential to know the commercially available materials and their effects. The tests were carried out with a solution simulating the evaporator concentrate waste coming from PWR nuclear reactors. It was cemented using two formulations, A and B, incorporating higher or lower amount of waste, respectively. It was added chemical admixtures from two manufacturers (S and H), which were: accelerators, set retarders and superplasticizers. The experiments were organized by a factorial design 23. The measured parameters were: the viscosity, the setting time, the paste and product density and the compressive strength. The parameter evaluated in this study was the compressive strength at age of 28 days, is considered essential security issues relating to the handling, transport and storage of cemented waste product. The results showed that the addition of accelerators improved the compressive strength of the cemented products. (author)

  11. Evaluating Additionality of an Innovation Subsidy Program Targeted at SMEs: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Sonja Radas

    2013-04-01

    Full Text Available This paper explores the effectiveness of a recently introduced innovation subsidy program targeted at SMEs in Croatia. Three aspects of program additionality were evaluated: input, output and behavioral aspects. Both qualitative and survey research was employed, and four case studies with selected recipient companies were conducted. This study is a response to the policy-makers’ need for early program assessment. It attempts to show that even with early evaluation and small population of recipients it is possible to gain insight into program effectiveness. The analysis suggests that the effects of programs targeted at innovative SMEs might need to be evaluated differently than general subsidies. This is especially evident in the evaluation of input additionality. The analysis indicates that SMEs which started with a higher R&D capability tend to increase R&D intensity while participating in the program. The program raised R&D and innovation capability of the participating SMEs, but commercialization of project results remains a concern.

  12. State of the Art Study on Aging of Asphalt Mixtures and Use of Antioxidant Additives

    Directory of Open Access Journals (Sweden)

    Okan Sirin

    2018-01-01

    Full Text Available The detrimental effects of hardening in asphalt pavements were first recognized by pioneering pavement engineers in the 1900s and have been studied extensively during the last 70 years. This hardening process, referred to as asphalt aging, is generally defined as change in the rheological properties of asphalt binders/mixtures due to changes in chemical composition during construction and its service life period. Aging causes the asphalt material to stiffen and embrittle, which affects the durability and leads to a high potential for cracking. This paper presents the state of the art on asphalt and asphalt mixture aging and use of antioxidant additives to retard the aging. A picture of complex molecular structure of asphalt and its changes due to atmospheric condition and various protocols used to simulate aging in laboratory environment are also discussed. Emphasis is given on recent studies on simulation of aging of asphalt mixtures as there has been limited research on mixtures compared to the asphalt binder. Finally, this paper presents the application of antiaging techniques and its mechanism, use of various types of antioxidant additives to retard aging of asphalt and, hence, improve the performance of asphalt pavements.

  13. Clinical study of Clorella vulgaris as an additive to a food diet

    International Nuclear Information System (INIS)

    Yarmonenko, S.P.; Tsyb, A.F.; Ogaki, M.

    1992-01-01

    Clinical study was conducted of preparation Clorella vulgaries (dried granules). This preparation is the source of vitamins, specific proteins and readily available salts. Commercial name of the preparation is Momotaro. Data of Japanses scientists on good tolerance of the preparation by human body were confermed in volunteers. Then during 2 mos study on the preparation was conducted in patients, oncologic patients oncologic patients with local injuries aftr radiotherapy, rescuers of the Chernobyl accident. A conclusion was made on expediency to use Momotaro as an additive to a food diet normalizing different body functions in amount 1-3 g in a day for children and 3-6 g in a day for adults. Negotiations are carried out on production of great amounts of Momotaro for the population of affected regions from the Chernobyl accident

  14. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives.

    Science.gov (United States)

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-12-21

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L(-1), or to Vc at a concentration less than 300 mg L(-1), there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L(-1) of ZnO NPs and 300 mg L(-1) of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.

  15. Assessment of Nano Cellulose from Peach Palm Residue as Potential Food Additive: Part II: Preliminary Studies.

    Science.gov (United States)

    Andrade, Dayanne Regina Mendes; Mendonça, Márcia Helena; Helm, Cristiane Vieira; Magalhães, Washington L E; de Muniz, Graciela Ines Bonzon; Kestur, Satyanarayana G

    2015-09-01

    High consumption of dietary fibers in the diet is related to the reduction of the risk of non-transmitting of chronic diseases, prevention of the constipation etc. Rich diets in dietary fibers promote beneficial effects for the metabolism. Considering the above and recognizing the multifaceted advantages of nano materials, there have been many attempts in recent times to use the nano materials in the food sector including as food additive. However, whenever new product for human and animal consumption is developed, it has to be tested for their effectiveness regarding improvement in the health of consumers, safety aspects and side effects. However, before it is tried with human beings, normally such materials would be assessed through biological tests on a living organism to understand its effect on health condition of the consumer. Accordingly, based on the authors' finding reported in a previous paper, this paper presents body weight, biochemical (glucose, cholesterol and lipid profile in blood, analysis of feces) and histological tests carried out with biomass based cellulose nano fibrils prepared by the authors for its possible use as food additive. Preliminary results of the study with mice have clearly brought out potential of these fibers for the said purpose.

  16. Hydrogen atom addition to the surface of graphene nanoflakes: A density functional theory study

    Science.gov (United States)

    Tachikawa, Hiroto

    2017-02-01

    Polycyclic aromatic hydrocarbons (PAHs) provide a 2-dimensional (2D) reaction surface in 3-dimensional (3D) interstellar space and have been utilized as a model of graphene surfaces. In the present study, the reaction of PAHs with atomic hydrogen was investigated by means of density functional theory (DFT) to systematically elucidate the binding nature of atomic hydrogen to graphene nanoflakes. PAHs with n = 4-37 were chosen, where n indicates the number of benzene rings. Activation energies of hydrogen addition to the graphene surface were calculated to be 5.2-7.0 kcal/mol at the CAM-B3LYP/6-311G(d,p) level, which is almost constant for all PAHs. The binding energies of hydrogen atom were slightly dependent on the size (n): 14.8-28.5 kcal/mol. The absorption spectra showed that a long tail is generated at the low-energy region after hydrogen addition to the graphene surface. The electronic states of hydrogenated graphenes were discussed on the basis of theoretical results.

  17. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    International Nuclear Information System (INIS)

    Stierum, Rob; Heijne, Wilbert; Kienhuis, Anne; Ommen, Ben van; Groten, John

    2005-01-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicological assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole

  18. Experimental and Numerical Study of Water Entry Supercavity Influenced by Turbulent Drag-Reducing Additives

    Directory of Open Access Journals (Sweden)

    Chen-Xing Jiang

    2014-04-01

    Full Text Available The configurational and dynamic characteristics of water entry supercavities influenced by turbulent drag-reducing additives were studied through supercavitating projectile approach, experimentally and numerically. The projectile was projected vertically into water and aqueous solution of CTAC with weight concentrations of 100, 500, and 1000 ppm, respectively, using a pneumatic nail gun. The trajectories of the projectile and the supercavity configuration were recorded by a high-speed CCD camera. Besides, water entry supercavities in water and CTAC solution were numerically simulated based on unsteady RANS scheme, together with application of VOF multiphase model. The Cross viscosity model was adopted to represent the fluid property of CTAC solution. It was obtained that the numerical simulation results are in consistence with experimental data. Numerical and experimental results all show that the length and diameter of supercavity in drag-reducing solution are larger than those in water, and the drag coefficient is smaller than that in water; the maintaining time of supercavity is longer in solution as well. The surface tension plays an important role in maintaining the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitation and drag reduction.

  19. Rheological and filtration characteristics of drilling fluids enhanced by nanoparticles with selected additives: an experimental study

    Directory of Open Access Journals (Sweden)

    Nima Mohamadian

    2018-05-01

    Full Text Available The suspension properties of drilling fluids containing pure and polymer-treated (partially-hydrolyzed polyacrylamide (PHPA or Xanthan gum clay nanoparticles are compared withthose of a conventional water-and-bentonite-based drilling fluid, used as the referencesample. Additionally, the mud weight, plastic viscosity, apparent viscosity, yield point, primary and secondary gelatinization properties, pH, and filtration properties of the various drilling fluids studied are also measured and compared. The performance of each drilling fluid type is evaluated with respect in terms of its ability to reduce mud cake thickness and fluid loss thereby inhibiting differential-pipe-sticking. For that scenario, the mud-cake thickness is varied, and the filtration properties of the drilling fluids are measured as an indicator of potential well-diameter reduction, caused by mud cake, adjacent to permeable formations. The novel results show that nanoparticles do significantly enhance the rheological and filtration characteristics of drilling fluids. A pure-clay-nanoparticle suspension, without any additives, reduced fluid loss to about 42% and reduced mud cake thickness to 30% compared to the reference sample. The xanthan-gum-treated-clay-nanoparticle drilling fluid showed good fluid loss control and reduced fluid loss by 61% compared to the reference sample. The presence of nanofluids also leads to reduced mud-cake thicknesses, directly mitigating the risks of differential pipe sticking.

  20. Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology.

    Science.gov (United States)

    Tsai, Ming-June; Wu, Ching-Tsai

    2014-05-06

    This study aimed to establish surgical guiding techniques for completing mandible lesion resection and reconstruction of the mandible defect area with fibula sections in one surgery by applying additive manufacturing technology, which can reduce the surgical duration and enhance the surgical accuracy and success rate. A computer assisted mandible reconstruction planning (CAMRP) program was used to calculate the optimal cutting length and number of fibula pieces and design the fixtures for mandible cutting, registration, and arrangement of the fibula segments. The mandible cutting and registering fixtures were then generated using an additive manufacturing system. The CAMRP calculated the optimal fibula cutting length and number of segments based on the location and length of the defective portion of the mandible. The mandible cutting jig was generated according to the boundary surface of the lesion resection on the mandible STL model. The fibular cutting fixture was based on the length of each segment, and the registered fixture was used to quickly arrange the fibula pieces into the shape of the defect area. In this study, the mandibular lesion was reconstructed using registered fibular sections in one step, and the method is very easy to perform. The application of additive manufacturing technology provided customized models and the cutting fixtures and registered fixtures, which can improve the efficiency of clinical application. This study showed that the cutting fixture helped to rapidly complete lesion resection and fibula cutting, and the registered fixture enabled arrangement of the fibula pieces and allowed completion of the mandible reconstruction in a timely manner. Our method can overcome the disadvantages of traditional surgery, which requires a long and different course of treatment and is liable to cause error. With the help of optimal cutting planning by the CAMRP and the 3D printed mandible resection jig and fibula cutting fixture, this all

  1. Photophysical studies of zinc phthalocyanine and chloroaluminum phthalocyanine incorporated into liposomes in the presence of additives

    Directory of Open Access Journals (Sweden)

    S.M.T. Nunes

    2004-02-01

    Full Text Available The photophysical properties of zinc phthalocyanine (ZnPC and chloroaluminum phthalocyanine (AlPHCl incorporated into liposomes of dimyristoyl phosphatidylcholine in the presence and absence of additives such as cholesterol or cardiolipin were studied by time-resolved fluorescence, laser flash photolysis and steady-state techniques. The absorbance of the drugs changed linearly with drug concentration, at least up to 5.0 µM in homogeneous and heterogeneous media, indicating that aggregation did not occur in these media within this concentration range. The incorporation of the drugs into liposomes increases the dimerization constant by one order of magnitude (for ZnPC, 3.6 x 10(4 to 1.0 x 10(5 M-1 and for AlPHCl, 3.7 x 10(4 to 1.5 x 10(5 M-1, but this feature dose does not rule out the use of this carrier, since the incorporation of these hydrophobic drugs into liposomes permits their systemic administration. Probe location in biological membranes and predominant positions of the phthalocyanines in liposomes were inferred on the basis of their fluorescence and triplet state properties. Both phthalocyanines are preferentially distributed in the internal regions of the liposome bilayer. The additives affect the distribution of these drugs within the liposomes, a fact that controls their delivery when both are used in a biological medium, retarding their release. The addition of the additives to the liposomes increases the internalization of phthalocyanines. The interaction of the drugs with a plasma protein, bovine serum albumin, was examined quantitatively by the fluorescence technique. The results show that when the drugs were incorporated into small unilamellar liposomes, the association with albumin was enhanced when compared with organic media, a fact that should increase the selectivity of tumor targeting by these phthalocyanines (for ZnPC, 0.71 x 10(6 to 1.30 x 10(7 M-1 and for AlPHCl, 4.86 x 10(7 to 3.10 x 10(8 M-1.

  2. Preparation, Characterization and Performance Studies of Active PVDF Ultrafiltration-Surfactants Membranes Containing PVP as Additive

    International Nuclear Information System (INIS)

    Nur Izzah Md Fadilah; Abdul Rahman Hassan

    2016-01-01

    The role of surfactants in the formation of active Poly(vinylidene fluoride) (PVDF) ultrafiltration (AUF) membranes was studied. The effect combination of surfactants that are Sodium dodecyl sulfate (SDS)/ Tween 80 and Tween 80/ Triton X-100 formulations on performance and morphological structures were investigated for the first time. The influence of surfactants blends on the membrane pores was also examined. Experimental data showed that combination of Tween 80/ Triton X-100 give the highest BSA permeation flux with a value of 285.51 Lm -2 h -1 . With combination of SDS/ Tween 80, the AUF membrane showed the highest protein rejection up to 93 % and 79 % for Bovine Serum Albumin (BSA) and Egg Albumin (EA), respectively. Moreover, membranes characterization demonstrated that the addition of SDS/ Tween 80 and Tween 80/ Triton X-100 were found to affect the performance, surface morphologies and membrane pores of AUF PVDF membranes. (author)

  3. Multivariate Study of Inulin Addition on the Quality of Sponge Cakes

    Directory of Open Access Journals (Sweden)

    Zbikowska Anna

    2017-09-01

    Full Text Available The aim of the study was to determine the possibility of reducing fat content in fatty sponge-cake products by addition of inulin. 200 g/kg, 440 g/kg, 680 g/kg and 100% of fat was substituted with 20 g/kg, 35 g/kg, 50 g/kg, and 62.5 g/kg of inulin, respectively. The authors used two types of fat: with low and high content of trans isomers – containing 2.1 g/kg and 511.2 g/kg of fatty acid methyl esters (FAME, respectively. An analysis of crumb quality and the evaluation of sensory discriminants were undertaken.

  4. Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys

    Science.gov (United States)

    Chen, B.; Moon, S. K.; Yao, X.; Bi, G.; Shen, J.; Umeda, J.; Kondoh, K.

    2018-02-01

    The microstructural and mechanical properties of AlSi10Mg alloys fabricated by additive manufacturing (AM) and powder metallurgy (PM) routes were investigated and compared. The microstructures were examined by scanning electron microscopy assisted with electron-dispersive spectroscopy. The crystalline features were studied by x-ray diffraction and electron backscatter diffraction. Room-temperature tensile tests and Vickers hardness measurements were performed to characterize the mechanical properties. It was found that the AM alloy had coarser Al grains but much finer Si precipitates compared with the PM alloy. Consequently, the AM alloy showed more than 100% increment in strength and hardness compared with the PM alloy due to the presence of ultrafine forms of Si, while exhibiting moderate ductility.

  5. Comparison of progressive addition lenses for general purpose and for computer vision: an office field study.

    Science.gov (United States)

    Jaschinski, Wolfgang; König, Mirjam; Mekontso, Tiofil M; Ohlendorf, Arne; Welscher, Monique

    2015-05-01

    Two types of progressive addition lenses (PALs) were compared in an office field study: 1. General purpose PALs with continuous clear vision between infinity and near reading distances and 2. Computer vision PALs with a wider zone of clear vision at the monitor and in near vision but no clear distance vision. Twenty-three presbyopic participants wore each type of lens for two weeks in a double-masked four-week quasi-experimental procedure that included an adaptation phase (Weeks 1 and 2) and a test phase (Weeks 3 and 4). Questionnaires on visual and musculoskeletal conditions as well as preferences regarding the type of lenses were administered. After eight more weeks of free use of the spectacles, the preferences were assessed again. The ergonomic conditions were analysed from photographs. Head inclination when looking at the monitor was significantly lower by 2.3 degrees with the computer vision PALs than with the general purpose PALs. Vision at the monitor was judged significantly better with computer PALs, while distance vision was judged better with general purpose PALs; however, the reported advantage of computer vision PALs differed in extent between participants. Accordingly, 61 per cent of the participants preferred the computer vision PALs, when asked without information about lens design. After full information about lens characteristics and additional eight weeks of free spectacle use, 44 per cent preferred the computer vision PALs. On average, computer vision PALs were rated significantly better with respect to vision at the monitor during the experimental part of the study. In the final forced-choice ratings, approximately half of the participants preferred either the computer vision PAL or the general purpose PAL. Individual factors seem to play a role in this preference and in the rated advantage of computer vision PALs. © 2015 The Authors. Clinical and Experimental Optometry © 2015 Optometry Australia.

  6. Edible Film from the Pectin of Papaya Skin (The Study of Cassava Starch and Glycerol Addition)

    Science.gov (United States)

    Rosida; Sudaryati; Yahya, A. M.

    2018-01-01

    The production of edible cooking made from the pectin of papaya skin with cassava starch and glycerol adition had been studied. The usage of pectin of papaya skin was one way to use papaya skin waste in order to raise its economic value. The aim of this study was to study the effect of cassava starch and glycerol concentration on the product qualities and to determine the the best treatment in making a good quality adible film and acceptable by the consumer. This research used completely randomized design in factorial patern with two factors. The first factor was cassava starch concentration (25%, 35% and 45%) and the second factor was glycerol concentration (20 %, 15% and 10). The data were analyzed by Analysis of Variance (Anova) and Duncan’s Multiple Range Test to detect the difference between the treatment. The best treatment was 25% cassava starch addition and 10% glycerol concentration which produced edible film which had moisture content of 21.16%, thickness of 0.023 mm, tensile strength of 1.900 N, elasticity of 14.223%, and vapor transmission rate of 116.963 g/m2/24 hours. So the production of edible film from papaya skin pectin was potential to be developed.

  7. Food additive carrageenan: Part II: A critical review of carrageenan in vivo safety studies.

    Science.gov (United States)

    Weiner, Myra L

    2014-03-01

    Carrageenan (CGN) is a seaweed-derived high molecular weight (Mw) hydrocolloid, primarily used as a stabilizer and thickener in food. The safety of CGN regarding its use in food is reviewed. Based on experimental studies in animals, ingested CGN is excreted quantitatively in the feces. Studies have shown that CGN is not significantly degraded by low gastric pH or microflora in the gastrointestinal (GI) tract. Due to its Mw, structure and its stability when bound to protein, CGN is not significantly absorbed or metabolized. CGN also does not significantly affect the absorption of nutrients. Subchronic and chronic feeding studies in rodents indicate that CGN at doses up to 5% in the diet does not induce any toxicological effects other than soft stools or diarrhea, which are a common effect for non-digestible high molecular weight compounds. Review of several studies from numerous species indicates that food grade CGN does not produce intestinal ulceration at doses up to 5% in the diet. Effects of CGN on the immune system following parenteral administration are well known, but not relevant to food additive uses. The majority of the studies evaluating the immunotoxicity potential were conducted with CGN administered in drinking water or by oral gavage where CGN exists in a random, open structured molecular conformation, particularly the lambda form; hence, it has more exposure to the intestinal mucosa than when bound to protein in food. Based on the many animal subchronic and chronic toxicity studies, CGN has not been found to affect the immune system, as judged by lack of effects on organ histopathology, clinical chemistry, hematology, normal health, and the lack of target organ toxicities. In these studies, animals consumed CGN at orders of magnitude above levels of CGN in the human diet: ≥1000 mg/kg/d in animals compared to 18-40 mg/kg/d estimated in the human diet. Dietary CGN has been shown to lack carcinogenic, tumor promoter, genotoxic, developmental, and

  8. Correlation study of effect of additional filter on radiation dose and image quality in digital mammography

    International Nuclear Information System (INIS)

    Liu Jie; Liu Peifang; Wang Hongbin; Zhang Shuping; Liu Xueou

    2012-01-01

    Objective: To explore the effect of different additional filters on radiation dose and image quality in digital mammography. Methods: Hologic company's Selenia digital mammography machine and the post-processing workstations and 5 M high resolution medical monitor were used in this study. Mammography phantoms with the thickness from 1.6 cm to 8.6 cm were used to simulate human breast tissue. The same exposure conditions, pressure, compression thickness, the anode were employed with the additional filters of Mo and Rh under the automatic and manual exposure mode. The image kV, mAs, pressure, filter, average glandular dose (AGD), entrance surface dose (ESD), signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and image score according to ACR criteria were recorded for the two additional filters. Paired sample t test was performed to compare the indices of Mo and Rh groups by using SPSS 17.0. Results: AGD and ESD of Rh and Mo group were both higher with the increase of the thickness of all the phantoms. AGD, ESD and their increased value of Rh filter(1.484 ± 1.041, 7.969 ± 7.633, 0.423 ± 0.190 and 3.057 ± 2.139) were lower than those of Mo filter (1.915 ± 1.301, 12.516 ± 11.632, 0.539 ±0.246 and 4.731 ± 3.294), in all the phantoms with different thickness (t values were 4.614, 3.209, 3.396 and 3.605, P<0.05). SNR, CNR, and image score of Rh and Mo group both decreased with the increase of the thickness of all the phantoms. There were no statistical difference (P>0.05). Conclusions: Compared with Mo filter, Rh filter could reduce the radiation dose, and this advantage is more obvious in the thicker phantom when the same image quality is required. (authors)

  9. Study of regularities of distributing powdered dietetic additives in coarse dispersed foodstuffs

    Directory of Open Access Journals (Sweden)

    M. Pogozhikh

    2017-12-01

    Full Text Available An important intervention in the composition of food products is enrichment of food with micronutrients. In this regard, the authors investigated how the additive with the corresponding trace element will be distributed in the food product, and in this case, in minced meat, in order to meet the human needs for microelements.Micronutrient deficiencies have a significant impact on the nutritional status and health of the population in well developed and developing countries. These deficiencies cause a delay in the growth of children, various diseases, mortality, brain damage, reduced cognitive capacity and the ability of people of all ages. The global scale of micronutrient deficiencies in dietary intakes, in particular the lack of trace elements, has led to the development of powdered dietary supplements containing essential elements that enrich the coarse-type food products to increase their nutritional value. The dietary supplement should provide the daily requirement of trace elements in the human body; therefore, it should be added to the product in a normalized amount and evenly distributed in the product.Two nuclear magnetic resonance (NMR and electron paramagnetic resonance (EPR analysis were performed to determine the distribution of the additive in food products. The analysis was carried out in two stages respectively: study of molecules mobility by measuring the spin-spin relaxation time (Т2 and spin-lattice relaxation (Т1 on a pulsed NMR spectrometer; establishment of a connection between the exponent of the amplitude of the sample A0 and its mass. Based on the data obtained, as a result of the measurement, a curve is constructed for the dependence of the amplitude of the echo signal from the value (time interval between the probing pulses. The spin label used in this work is one of the first variants of a paramagnetic probe-an easily accessible transition metal ion Mn2+. According to the constructed graphs and tomograms from the

  10. Method for mapping population-based case-control studies: an application using generalized additive models

    Directory of Open Access Journals (Sweden)

    Aschengrau Ann

    2006-06-01

    Full Text Available Abstract Background Mapping spatial distributions of disease occurrence and risk can serve as a useful tool for identifying exposures of public health concern. Disease registry data are often mapped by town or county of diagnosis and contain limited data on covariates. These maps often possess poor spatial resolution, the potential for spatial confounding, and the inability to consider latency. Population-based case-control studies can provide detailed information on residential history and covariates. Results Generalized additive models (GAMs provide a useful framework for mapping point-based epidemiologic data. Smoothing on location while controlling for covariates produces adjusted maps. We generate maps of odds ratios using the entire study area as a reference. We smooth using a locally weighted regression smoother (loess, a method that combines the advantages of nearest neighbor and kernel methods. We choose an optimal degree of smoothing by minimizing Akaike's Information Criterion. We use a deviance-based test to assess the overall importance of location in the model and pointwise permutation tests to locate regions of significantly increased or decreased risk. The method is illustrated with synthetic data and data from a population-based case-control study, using S-Plus and ArcView software. Conclusion Our goal is to develop practical methods for mapping population-based case-control and cohort studies. The method described here performs well for our synthetic data, reproducing important features of the data and adequately controlling the covariate. When applied to the population-based case-control data set, the method suggests spatial confounding and identifies statistically significant areas of increased and decreased odds ratios.

  11. Biochemometrics to Identify Synergists and Additives from Botanical Medicines: A Case Study with Hydrastis canadensis (Goldenseal).

    Science.gov (United States)

    Britton, Emily R; Kellogg, Joshua J; Kvalheim, Olav M; Cech, Nadja B

    2018-03-23

    A critical challenge in the study of botanical natural products is the difficulty of identifying multiple compounds that may contribute additively, synergistically, or antagonistically to biological activity. Herein, it is demonstrated how combining untargeted metabolomics with synergy-directed fractionation can be effective toward accomplishing this goal. To demonstrate this approach, an extract of the botanical goldenseal ( Hydrastis canadensis) was fractionated and tested for its ability to enhance the antimicrobial activity of the alkaloid berberine (4) against the pathogenic bacterium Staphylococcus aureus. Bioassay data were combined with untargeted mass spectrometry-based metabolomics data sets (biochemometrics) to produce selectivity ratio (SR) plots, which visually show which extract components are most strongly associated with the biological effect. Using this approach, the new flavonoid 3,3'-dihydroxy-5,7,4'-trimethoxy-6,8- C-dimethylflavone (29) was identified, as were several flavonoids known to be active. When tested in combination with 4, 29 lowered the IC 50 of 4 from 132.2 ± 1.1 μM to 91.5 ± 1.1 μM. In isolation, 29 did not demonstrate antimicrobial activity. The current study highlights the importance of fractionation when utilizing metabolomics for identifying bioactive components from botanical extracts and demonstrates the power of SR plots to help merge and interpret complex biological and chemical data sets.

  12. Study of modified polypropylene nanocomposites by gamma irradiation with addition of cloisite clay

    International Nuclear Information System (INIS)

    Komatsu, Luiz G.H.; Oliani, Washington L.; Parra, Duclerc F.; Lugao, Ademar B.

    2011-01-01

    Nanomaterials, and, in particular, nanoreinforcements for polymer composites have been the subject of intense research, development and commercialization. Clay-containing polymeric nanocomposites (CPNCs) are used as either functional or structural materials, large-volume CPNCs with a commodity or engineering polymer as the matrix, where the mechanical behavior is the main concern (followed by gas-vapor barrier properties, flammability, etc.). This work concerns to the study of the mechanical, thermal and morphological behavior nanocomposite, (HMSPP) Polypropylene High Melt Strength (obtained at dose of 12.5 kGy) and addition of 5 and 10 wt% of organoclay with Cloisite 20A nanocomposite. Agent compatibilizer polypropylene-graft, (PP-g-AM) was added at 3% concentration and the clay was dispersed through melt intercalation technique using a twin-screw extruder). We observed an increase in traction rupture. The mechanical behavior was evaluated by strength, the thermal behavior were evaluated by the technique of differential scanning calorimetry, the morphology of the nanocomposites was studied by scanning electron microscopy, melt flow index and Fourier transformed infrared spectroscopy in nanocomposites Cloisite 20 A at 10% wt. (author)

  13. Inhibition study of additives towards the corrosion of ferrous metal in palm biodiesel

    International Nuclear Information System (INIS)

    Fazal, M.A.; Sazzad, B.S.; Haseeb, A.S.M.A.; Masjuki, H.H.

    2016-01-01

    Highlights: • TBA doped biodiesel exhibits fairly good corrosion inhibition efficiency. • TBA forms nitrogen-containing layer on metal surface and protects the corrosion. • Materials exposed to TBA doped biodiesel show less surface roughness. - Abstract: Some efforts have already been given by other researchers to characterize the corrosion behavior of different metals in biodiesel. However, there is very limited information on its remedial measure. Therefore, this study investigates the effects of tert-butylamine (TBA), benzotriazole (BTA), butylate-dhydroxytoluene (BHT), and pyrogallol (PY) on the corrosion of cast iron (CI) and low carbon steel (LCS) through an immersion test in palm biodiesel (B100) at 300 K. Result shows that TBA-doped biodiesel exhibits fairly good corrosion-inhibiting properties for materials exposed to B100. Inhibition efficiency of TBA is found to be 86.54% and 86.71% for CI and LCS, respectively which is far better than other tested additives in this study. The high inhibition efficiency could be attributed to the dominant physical adsorption of N-containing compound which creates a protective layer over the metal surface and prevents corrosion.

  14. Study of chemical-mineralogical properties of modified soils with polymers addition

    Directory of Open Access Journals (Sweden)

    Patricio Jonny

    2016-01-01

    Full Text Available On highways, the soil is considered a supported material and compound pavements layers. For this, they must have such characteristics that confer stability and mechanical resistance to traffic internal forces during the pavement life. When soils do not have required characteristics by the project can be used stabilization techniques that make the natural soil adequately to roads requirement. Based on this assumption, this study aimed to evaluate the efficacy of polymer association in soil stabilization for use in roads pavements. Were evaluated chemical and mineralogical properties on two (2 different soils with sample of pure soil and with the addition of the polymer association. Based on the obtained results, polymer association changes was observed on X-ray fluorescent spectrometry (XRF; X-ray diffraction (XRD; scanning electron microscopy (SEM and Methylene blue. In general, the polymeric association studied in this research was effective in chemical and mineralogical analyzes for use on stabilized soils, making this technique efficient for use in layers of road pavements.

  15. Measuring the Effect of Housing Quality Interventions: The Case of the New Zealand “Rental Warrant of Fitness”

    Science.gov (United States)

    Telfar-Barnard, Lucy; Bennett, Julie; Howden-Chapman, Philippa; Jacobs, David E.; Ormandy, David; Cutler-Welsh, Matthew; Preval, Nicholas; Baker, Michael G.; Keall, Michael

    2017-01-01

    In New Zealand, as in many other countries, housing in the private-rental sector is in worse condition than in the owner-occupier housing sector. New Zealand residential buildings have no inspection regime after original construction signoff. Laws and regulations mandating standards for existing residential housing are outdated and spread over a range of instruments. Policies to improve standards in existing housing have been notoriously difficult to implement. In this methods paper, we describe the development and implementation of a rental Warrant of Fitness (WoF) intended to address these problems. Dwellings must pass each of 29 criteria for habitability, insulation, heating, ventilation, safety, amenities, and basic structural soundness to reach the WoF minimum standard. The WoF’s development was based on two decades of research on the impact of housing quality on health and wellbeing, and strongly influenced by the UK Housing Health and Safety Rating System and US federal government housing standards. Criteria were field-tested across a range of dwelling types and sizes, cities, and climate zones. The implementation stage of our WoF research consists of a non-random controlled quasi-experimental study in which we work with two city-level local government councils to implement the rental WoF, recruiting adjoining council areas as controls, and measuring changes in health, economic, and social outcomes. PMID:29112147

  16. Measuring the Effect of Housing Quality Interventions: The Case of the New Zealand “Rental Warrant of Fitness”

    Directory of Open Access Journals (Sweden)

    Lucy Telfar-Barnard

    2017-11-01

    Full Text Available In New Zealand, as in many other countries, housing in the private-rental sector is in worse condition than in the owner-occupier housing sector. New Zealand residential buildings have no inspection regime after original construction signoff. Laws and regulations mandating standards for existing residential housing are outdated and spread over a range of instruments. Policies to improve standards in existing housing have been notoriously difficult to implement. In this methods paper, we describe the development and implementation of a rental Warrant of Fitness (WoF intended to address these problems. Dwellings must pass each of 29 criteria for habitability, insulation, heating, ventilation, safety, amenities, and basic structural soundness to reach the WoF minimum standard. The WoF’s development was based on two decades of research on the impact of housing quality on health and wellbeing, and strongly influenced by the UK Housing Health and Safety Rating System and US federal government housing standards. Criteria were field-tested across a range of dwelling types and sizes, cities, and climate zones. The implementation stage of our WoF research consists of a non-random controlled quasi-experimental study in which we work with two city-level local government councils to implement the rental WoF, recruiting adjoining council areas as controls, and measuring changes in health, economic, and social outcomes.

  17. Discrete-Time Pricing and Optimal Exercise of American Perpetual Warrants in the Geometric Random Walk Model

    Energy Technology Data Exchange (ETDEWEB)

    Vanderbei, Robert J., E-mail: rvdb@princeton.edu [Princeton University, Department of Operations Research and Financial Engineering (United States); P Latin-Small-Letter-Dotless-I nar, Mustafa C., E-mail: mustafap@bilkent.edu.tr [Bilkent University, Department of Industrial Engineering (Turkey); Bozkaya, Efe B. [Sabanc Latin-Small-Letter-Dotless-I University, Faculty of Administrative Sciences (Turkey)

    2013-02-15

    An American option (or, warrant) is the right, but not the obligation, to purchase or sell an underlying equity at any time up to a predetermined expiration date for a predetermined amount. A perpetual American option differs from a plain American option in that it does not expire. In this study, we solve the optimal stopping problem of a perpetual American option (both call and put) in discrete time using linear programming duality. Under the assumption that the underlying stock price follows a discrete time and discrete state Markov process, namely a geometric random walk, we formulate the pricing problem as an infinite dimensional linear programming (LP) problem using the excessive-majorant property of the value function. This formulation allows us to solve complementary slackness conditions in closed-form, revealing an optimal stopping strategy which highlights the set of stock-prices where the option should be exercised. The analysis for the call option reveals that such a critical value exists only in some cases, depending on a combination of state-transition probabilities and the economic discount factor (i.e., the prevailing interest rate) whereas it ceases to be an issue for the put.

  18. Measuring the Effect of Housing Quality Interventions: The Case of the New Zealand "Rental Warrant of Fitness".

    Science.gov (United States)

    Telfar-Barnard, Lucy; Bennett, Julie; Howden-Chapman, Philippa; Jacobs, David E; Ormandy, David; Cutler-Welsh, Matthew; Preval, Nicholas; Baker, Michael G; Keall, Michael

    2017-11-07

    In New Zealand, as in many other countries, housing in the private-rental sector is in worse condition than in the owner-occupier housing sector. New Zealand residential buildings have no inspection regime after original construction signoff. Laws and regulations mandating standards for existing residential housing are outdated and spread over a range of instruments. Policies to improve standards in existing housing have been notoriously difficult to implement. In this methods paper, we describe the development and implementation of a rental Warrant of Fitness (WoF) intended to address these problems. Dwellings must pass each of 29 criteria for habitability, insulation, heating, ventilation, safety, amenities, and basic structural soundness to reach the WoF minimum standard. The WoF's development was based on two decades of research on the impact of housing quality on health and wellbeing, and strongly influenced by the UK Housing Health and Safety Rating System and US federal government housing standards. Criteria were field-tested across a range of dwelling types and sizes, cities, and climate zones. The implementation stage of our WoF research consists of a non-random controlled quasi-experimental study in which we work with two city-level local government councils to implement the rental WoF, recruiting adjoining council areas as controls, and measuring changes in health, economic, and social outcomes.

  19. Discrete-Time Pricing and Optimal Exercise of American Perpetual Warrants in the Geometric Random Walk Model

    International Nuclear Information System (INIS)

    Vanderbei, Robert J.; Pınar, Mustafa Ç.; Bozkaya, Efe B.

    2013-01-01

    An American option (or, warrant) is the right, but not the obligation, to purchase or sell an underlying equity at any time up to a predetermined expiration date for a predetermined amount. A perpetual American option differs from a plain American option in that it does not expire. In this study, we solve the optimal stopping problem of a perpetual American option (both call and put) in discrete time using linear programming duality. Under the assumption that the underlying stock price follows a discrete time and discrete state Markov process, namely a geometric random walk, we formulate the pricing problem as an infinite dimensional linear programming (LP) problem using the excessive-majorant property of the value function. This formulation allows us to solve complementary slackness conditions in closed-form, revealing an optimal stopping strategy which highlights the set of stock-prices where the option should be exercised. The analysis for the call option reveals that such a critical value exists only in some cases, depending on a combination of state-transition probabilities and the economic discount factor (i.e., the prevailing interest rate) whereas it ceases to be an issue for the put.

  20. Predictive factors warrant screening for obstructive sleep apnea in COPD: a Taiwan National Survey

    Directory of Open Access Journals (Sweden)

    Hang LW

    2016-03-01

    questionnaire to assess COPD symptoms and OSA risk, comorbidities, and performance of daily activities. Data from COPD cohorts with and without risk of OSA were analyzed and compared. Results: Of 6,600 interviews completed, 404 subjects fit the epidemiological case definition of COPD – an overall prevalence of 6.1% in this national sample. Data on OSA risk were available for 292 of this COPD cohort, of whom 29.5% were at risk of OSA. Compared to those without risk of OSA, those with risk of OSA were significantly more likely to have hypertension or cardiovascular disease and diabetes, had significantly higher body mass index and COPD Assessment Test scores, and reported impaired work performance and leisure activities. Conclusion: Among adults in Taiwan who fulfill epidemiologic criteria for COPD, 29.5% have coexisting risk of OSA. Comorbid hypertension or cardiovascular disease and diabetes are common and significantly more prevalent among the COPD population at risk of OSA than those who are not. OSA screening is warranted in patients with COPD with those risk factors that are more prevalent in COPD with risk of OSA than without, to target early interventions to reduce adverse cardiovascular sequelae from overlap syndrome. Keywords: cardiovascular risk, COPD, coexistent, obstructive sleep apnea, OSA, overlap syndrome

  1. Beyond the Call of Duty: A Qualitative Study of Teachers' Additional Responsibilities Related to Sexuality Education

    Science.gov (United States)

    Eisenberg, Marla E.; Madsen, Nikki; Oliphant, Jennifer A.; Resnick, Michael

    2011-01-01

    Seven focus groups were conducted with sexuality educators in Minnesota to explore ways that teaching sexuality education differs from teaching other health education content and to determine if additional supports or resources are needed for sexuality educators. Teachers described many specific additional responsibilities or concerns related to…

  2. Experimental study of hydrogen as a fuel additive in internal combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Saanum, Inge

    2008-07-01

    Combustion of hydrocarbons in internal combustion engines results in emissions that can be harmful both to human health and to the environment. Although the engine technology is improving, the emissions of NO{sub x}, PM and UHC are still challenging. Besides, the overall consumption of fossil fuel and hence the emissions of CO{sub 2} are increasing because of the increasing number of vehicles. This has lead to a focus on finding alternative fuels and alternative technologies that may result in lower emissions of harmful gases and lower CO{sub 2} emissions. This thesis treats various topics that are relevant when using blends of fuels in different internal combustion engine technologies, with a particular focus on using hydrogen as a fuel additive. The topics addressed are especially the ones that impact the environment, such as emissions of harmful gases and thermal efficiency (fuel consumption). The thesis is based on experimental work performed at four different test rigs: 1. A dynamic combustion rig with optical access to the combustion chamber where spark ignited premixed combustion could be studied by means of a Schlieren optical setup and a high speed video camera. 2. A spark ignition natural gas engine rig with an optional exhaust gas recycling system. 3. A 1-cylinder diesel engine prepared for homogeneous charge compression ignition combustion. 4. A 6-cylinder standard diesel engine The engine rigs were equipped with cylinder pressure sensors, engine dynamometers, exhaust gas analyzers etc. to enable analyses of the effects of different fuels. The effect of hydrogen blended with methane and natural gas in spark ignited premixed combustion was investigated in the dynamic combustion rig and in a natural gas engine. In the dynamic combustion rig, the effect of hydrogen added to methane on the flame speed and the flame structure was investigated at elevated pressure and temperature. A considerable increase in the flame speed was observed when adding 30 vol

  3. Experimental study on SI engine fuelled with butanol–gasoline blend and H2O addition

    International Nuclear Information System (INIS)

    Feng, Renhua; Yang, Jing; Zhang, Daming; Deng, Banglin; Fu, Jianqin; Liu, Jingping; Liu, Xiaoqiang

    2013-01-01

    Highlights: • Ignition timing has been optimized. • 1% H 2 O has been added. • Positive results have been achieved in engine torque, BSEC, CO emissions and HC emissions. • NOx and CO 2 emissions go up. - Abstract: An experimental study was conducted on a single cylinder motorcycle engine for two operating modes of full load and partial load at 6500 rpm and 8500 rpm with pure gasoline and 35% volume butanol–gasoline blend. The engine ignition timing for 35% volume butanol–gasoline blend has been optimized, and 1% volume H 2 O has also been added to the butanol–gasoline blend fuel. Engine performance parameters, fuel economy and emissions have been measured and analyzed. The experimental results showed that engine torque, BSEC, CO emissions and HC emissions are better than that of pure gasoline at both full load and partial load with 35% volume butanol and 1% H 2 O addition, combined with the modified ignition timing. But NOx and CO 2 emissions are worse than that of the original level of pure gasoline

  4. Study of additive manufactured microwave cavities for pulsed optically pumped atomic clock applications

    Science.gov (United States)

    Affolderbach, C.; Moreno, W.; Ivanov, A. E.; Debogovic, T.; Pellaton, M.; Skrivervik, A. K.; de Rijk, E.; Mileti, G.

    2018-03-01

    Additive manufacturing (AM) of passive microwave components is of high interest for the cost-effective and rapid prototyping or manufacture of devices with complex geometries. Here, we present an experimental study on the properties of recently demonstrated microwave resonator cavities manufactured by AM, in view of their applications to high-performance compact atomic clocks. The microwave cavities employ a loop-gap geometry using six electrodes. The critical electrode structures were manufactured monolithically using two different approaches: Stereolithography (SLA) of a polymer followed by metal coating and Selective Laser Melting (SLM) of aluminum. The tested microwave cavities show the desired TE011-like resonant mode at the Rb clock frequency of ≈6.835 GHz, with a microwave magnetic field highly parallel to the quantization axis across the vapor cell. When operated in an atomic clock setup, the measured atomic Rabi oscillations are comparable to those observed for conventionally manufactured cavities and indicate a good uniformity of the field amplitude across the vapor cell. Employing a time-domain Ramsey scheme on one of the SLA cavities, high-contrast (34%) Ramsey fringes are observed for the Rb clock transition, along with a narrow (166 Hz linewidth) central fringe. The measured clock stability of 2.2 × 10-13 τ-1/2 up to the integration time of 30 s is comparable to the current state-of-the-art stabilities of compact vapor-cell clocks based on conventional microwave cavities and thus demonstrates the feasibility of the approach.

  5. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    Science.gov (United States)

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Reactor core conversion studies of Ghana: Research Reactor-1 and proposal for addition of safety rod

    International Nuclear Information System (INIS)

    Odoi, H.C.

    2014-06-01

    The inclusion of an additional safety rod in conjunction with a core conversion study of Ghana Research Reactor-1 (GHARR-1) was carried out using neutronics, thermal hydraulics and burnup codes. The study is based on a recommendation by Integrated Safety Assessment for Research Reactors (INSARP) mission to incorporate a safety rod to the reactor safety system as well as the need to replace the reactor fuel with LEU. Conversion from one fuel type to another requires a complete re-evaluation of the safety analysis. Changes to the reactivity worth, shutdown margin, power density and material properties must be taken into account, and appropriate modifications made. Neutronics analysis including burnup was studied followed by thermal hydraulics analyses which comprise steady state and transients. Four computer codes were used for the analysis; MCNP, REBUS, PLTEP and PARET. The neutronics analysis revealed that the LEU core must be operated at 34 Kw in order to attain the flux of 1.0E12 n/cm 2 .s as the nominal flux of the HEU core. The auxiliary safety rod placed at a modified irradiation site gives a better worth than the cadmium capsules. For core excess reactivity of 4 mk, 348 fuel pins would be appropriate for the GHARR-1 LEU core. Results indicate that flux level of 1.0E12 n/cm 2 .s in the inner irradiation channel will not be compromised, if the power of the LEU core is increased to 34 kW. The GHARR-1 core using LEU-U0 2 -12.5% fuel can be operated for 23 shim cycles, with cycles length 2.5 years, for over 57 years at the 17 kW power level. All 23 LEU cycles meet the ∼ 4.0 mk excess reactivity required at the beginning of cycle . For comparison, the MNSR HEU reference core can also be operated for 23 shim cycles, but with a cycle length of 2.0 years for just over 46 years at 15.0kW power level. It is observed that the GHARR-1 core with LEU UO 2 fuel enriched to 12.5% and a power level of 34 kW can be operated ∼25% longer than the current HEU core operated at

  7. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol

    Directory of Open Access Journals (Sweden)

    Peterson GP

    2011-01-01

    Full Text Available Abstract An experimental investigation of the combustion behavior of nano-aluminum (n-Al and nano-aluminum oxide (n-Al2O3 particles stably suspended in biofuel (ethanol as a secondary energy carrier was conducted. The heat of combustion (HoC was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results.

  8. A comparative experimental study of steel fibre-additive reinforced concrete beams

    Directory of Open Access Journals (Sweden)

    Altun, F.

    2004-12-01

    Full Text Available Five different batches of class C20 concrete, containing Dramix-RC-80/60-BN steel fibers (SFs as additives at doses of 0, 30, 40, 50 and 60 kg/m3, and six Ø 15x30 cm prisms were poured from each batch. Standard crushing tests were run on all the specimens and the respective load-displacement and stress-strain curves were plotted. Toughness, ultimate compressive strength and the modulus of elasticity were determined for all specimens. The compressive strength and modulus of elasticity declined in 30 kg/m3 steel-fiber-additive concrete (SFAC by 9% and 7% compared to the reference C20 concrete without SFs, and the area under the load-deflection curve grew more than twofold. In concrete with a higher SF dosage, the differences in strength and elasticity were around I0% whilst toughness was about the same. Because toughness values were similar in 30, 40, 50 and 60 kg/m3 plain SF-additive concrete and the strength and modulus of elasticity were slightly better in the mixes with the smallest proportion of SF for reasons of economy, 30 kg/m3 was taken as the optimum dose of steel fiber to be added to the reinforced concrete used in a second phase of the study. Hence, of the six reinforced concrete (RC beams made, all of equal size and with the same under-reinforced tensile reinforcement design, three were made with concrete containing the above-mentioned dose of SF. In addition to compressive strength, these beams were tested for flexural strength, which was found to be 18% greater for the SFARC beams than the ordinary RC beams, and the upper arms of the load versus mid-span deflection curves prior to ultimate failure of the SFARC beams were considerably longer than the same arms on the curves for ordinary RC beams.

    Se han utilizado cinco lotes diferentes de hormigón clase C20 cuatro de ellos con fibras de acero (FA, identificadas como Dramix-CR-80/60-BN, en cuatro proporciones diferentes: 30, 40, 50 y 60 kg/m3 y el quinto exento de

  9. PRECISE - pregabalin in addition to usual care for sciatica: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Mathieson, Stephanie; Maher, Christopher G; McLachlan, Andrew J; Latimer, Jane; Koes, Bart W; Hancock, Mark J; Harris, Ian; Day, Richard O; Pik, Justin; Jan, Stephen; Billot, Laurent; Lin, Chung-Wei Christine

    2013-07-11

    Sciatica is a type of neuropathic pain that is characterised by pain radiating into the leg. It is often accompanied by low back pain and neurological deficits in the lower limb. While this condition may cause significant suffering for the individual, the lack of evidence supporting effective treatments for sciatica makes clinical management difficult. Our objectives are to determine the efficacy of pregabalin on reducing leg pain intensity and its cost-effectiveness in patients with sciatica. PRECISE is a prospectively registered, double-blind, randomised placebo-controlled trial of pregabalin compared to placebo, in addition to usual care. Inclusion criteria include moderate to severe leg pain below the knee with evidence of nerve root/spinal nerve involvement. Participants will be randomised to receive either pregabalin with usual care (n = 102) or placebo with usual care (n = 102) for 8 weeks. The medicine dosage will be titrated up to the participant's optimal dose, to a maximum 600 mg per day. Follow up consultations will monitor individual progress, tolerability and adverse events. Usual care, if deemed appropriate by the study doctor, may include a referral for physical or manual therapy and/or prescription of analgesic medication. Participants, doctors and researchers collecting participant data will be blinded to treatment allocation. Participants will be assessed at baseline and at weeks 2, 4, 8, 12, 26 and 52. The primary outcome will determine the efficacy of pregabalin in reducing leg pain intensity. Secondary outcomes will include back pain intensity, disability and quality of life. Data analysis will be blinded and by intention-to-treat. A parallel economic evaluation will be conducted from health sector and societal perspectives. This study will establish the efficacy of pregabalin in reducing leg pain intensity in patients with sciatica and provide important information regarding the effect of pregabalin treatment on disability and quality of life

  10. 20 CFR 416.934 - Impairments which may warrant a finding of presumptive disability or presumptive blindness.

    Science.gov (United States)

    2010-04-01

    ... Blindness Presumptive Disability and Blindness § 416.934 Impairments which may warrant a finding of presumptive disability or presumptive blindness. We may make findings of presumptive disability and... school, because of mental deficiency or is unable to attend any type of school (or if beyond school age...

  11. Can ligand addition to soil enhance Cd phytoextraction? A mechanistic model study.

    Science.gov (United States)

    Lin, Zhongbing; Schneider, André; Nguyen, Christophe; Sterckeman, Thibault

    2014-11-01

    Phytoextraction is a potential method for cleaning Cd-polluted soils. Ligand addition to soil is expected to enhance Cd phytoextraction. However, experimental results show that this addition has contradictory effects on plant Cd uptake. A mechanistic model simulating the reaction kinetics (adsorption on solid phase, complexation in solution), transport (convection, diffusion) and root absorption (symplastic, apoplastic) of Cd and its complexes in soil was developed. This was used to calculate plant Cd uptake with and without ligand addition in a great number of combinations of soil, ligand and plant characteristics, varying the parameters within defined domains. Ligand addition generally strongly reduced hydrated Cd (Cd(2+)) concentration in soil solution through Cd complexation. Dissociation of Cd complex ([Formula: see text]) could not compensate for this reduction, which greatly lowered Cd(2+) symplastic uptake by roots. The apoplastic uptake of [Formula: see text] was not sufficient to compensate for the decrease in symplastic uptake. This explained why in the majority of the cases, ligand addition resulted in the reduction of the simulated Cd phytoextraction. A few results showed an enhanced phytoextraction in very particular conditions (strong plant transpiration with high apoplastic Cd uptake capacity), but this enhancement was very limited, making chelant-enhanced phytoextraction poorly efficient for Cd.

  12. Nickel/zinc-catalyzed decarbonylative addition of anhydrides to alkynes: a DFT study.

    Science.gov (United States)

    Meng, Qingxi; Li, Ming

    2013-10-01

    Density functional theory (DFT) was used to investigate the nickel- or nickel(0)/zinc- catalyzed decarbonylative addition of phthalic anhydrides to alkynes. All intermediates and transition states were optimized completely at the B3LYP/6-31+G(d,p) level. Calculated results indicated that the decarbonylative addition of phthalic anhydrides to alkynes was exergonic, and the total free energy released was -87.6 kJ mol(-1). In the five-coordinated complexes M4a and M4b, the insertion reaction of alkynes into the Ni-C bond occurred prior to that into the Ni-O bond. The nickel(0)/zinc-catalyzed decarbonylative addition was much more dominant than the nickel-catalyzed one in whole catalytic decarbonylative addition. The reaction channel CA→M1'→T1'→M2'→T2'→M3a'→M4a'→T3a1'→M5a1' →T4a1'→M6a'→P was the most favorable among all reaction pathways of the nickel- or nickel(0)/zinc- catalyzed decarbonylative addition of phthalic anhydrides to alkynes. And the alkyne insertion reaction was the rate-determining step for this channel. The additive ZnCl2 had a significant effect, and it might change greatly the electron and geometry structures of those intermediates and transition states. On the whole, the solvent effect decreased the free energy barriers.

  13. 78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

    Science.gov (United States)

    2013-11-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-1994-D-0007] Guidance for Industry: Studies To Evaluate the Utility of Anti- Salmonella Chemical Food Additives in Feeds... Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in Feeds,'' and is...

  14. Studies on the Food Additive Propyl Gallate: Synthesis, Structural Characterization, and Evaluation of the Antioxidant Activity

    Science.gov (United States)

    Garrido, Jorge; Garrido, E. Manuela; Borges, Fernanda

    2012-01-01

    Antioxidants are additives largely used in industry for delaying, retarding, or preventing the development of oxidative deterioration. Propyl gallate (E310) is a phenolic antioxidant extensively used in the food, cosmetics, and pharmaceutical industries. A series of lab experiments have been developed to teach students about the importance and…

  15. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

    Directory of Open Access Journals (Sweden)

    Andreas Gansäuer

    2013-08-01

    Full Text Available The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol−1 and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG‡ and ΔGR are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically.

  16. West Nile Virus: High Transmission Rate in North-Western European Mosquitoes Indicates Its Epidemic Potential and Warrants Increased Surveillance.

    Directory of Open Access Journals (Sweden)

    Jelke J Fros

    Full Text Available West Nile virus (WNV is a highly pathogenic flavivirus transmitted by Culex spp. mosquitoes. In North America (NA, lineage 1 WNV caused the largest outbreak of neuroinvasive disease to date, while a novel pathogenic lineage 2 strain circulates in southern Europe. To estimate WNV lineage 2 epidemic potential it is paramount to know if mosquitoes from currently WNV-free areas can support further spread of this epidemic.We assessed WNV vector competence of Culex pipiens mosquitoes originating from north-western Europe (NWE in direct comparison with those from NA. We exposed mosquitoes to infectious blood meals of lineage 1 or 2 WNV and determined the infection and transmission rates. We explored reasons for vector competence differences by comparing intrathoracic injection versus blood meal infection, and we investigated the influence of temperature. We found that NWE mosquitoes are highly competent for both WNV lineages, with transmission rates up to 25%. Compared to NA mosquitoes, transmission rates for lineage 2 WNV were significantly elevated in NWE mosquitoes due to better virus dissemination from the midgut and a shorter extrinsic incubation time. WNV infection rates further increased with temperature increase.Our study provides experimental evidence to indicate markedly different risk levels between both continents for lineage 2 WNV transmission and suggests a degree of genotype-genotype specificity in the interaction between virus and vector. Our experiments with varying temperatures explain the current localized WNV activity in southern Europe, yet imply further epidemic spread throughout NWE during periods with favourable climatic conditions. This emphasizes the need for intensified surveillance of virus activity in current WNV disease-free regions and warrants increased awareness in clinics throughout Europe.

  17. Bevacizumab treatment in malignant meningioma with additional radiation necrosis. An MRI diffusion and perfusion case study

    Energy Technology Data Exchange (ETDEWEB)

    Bostroem, J.P. [University of Bonn Medical Center, Department of Neurosurgery, Bonn (Germany); MediClin Robert Janker Clinic and MVZ MediClin, Department of Radiosurgery and Stereotactic Radiotherapy, Bonn (Germany); Seifert, M.; Greschus, S. [University of Bonn Medical Center, Department of Radiology, Bonn (Germany); Schaefer, N.; Herrlinger, U. [University of Bonn Medical Center, Division of Clinical Neurooncology, Department of Neurology, Bonn (Germany); Glas, M. [University of Bonn Medical Center, Division of Clinical Neurooncology, Department of Neurology, Bonn (Germany); University of Bonn Medical Center, Stem Cell Pathologies, Institute of Reconstructive Neurobiology, Bonn (Germany); MediClin Robert Janker Clinic, Clinical Cooperation Unit Neurooncology, Bonn (Germany); Lammering, G. [MediClin Robert Janker Clinic and MVZ MediClin, Department of Radiosurgery and Stereotactic Radiotherapy, Bonn (Germany); MediClin Robert Janker Clinic, Clinical Cooperation Unit Neurooncology, Bonn (Germany); Heinrich-Heine-University of Duesseldorf, Department of Radiotherapy and Radiation Oncology, Duesseldorf (Germany)

    2014-04-15

    Recently two retrospective cohort studies report efficacy of bevacizumab in patients with recurrent atypical and anaplastic meningioma. Another successful therapeutic option of bevacizumab seems to be treatment of cerebral radiation necrosis. However, the antiangiogenic effects in MRI diffusion and perfusion in meningiomas have not been previously described in detail. The objective of this research was to evaluate the clinical and MR imaging effects of bevacizumab in a malignant meningioma patient harboring additional cerebral radiation necrosis. We report the case of an 80-year-old woman who underwent bevacizumab therapy (5 mg/kg every 2 weeks for 2 months) for treatment of a symptomatic radiation necrosis in malignant meningiomatosis of World Health Organization (WHO) grade III. The patient was closely monitored with MRI including diffusion and perfusion studies. Upon bevacizumab therapy, the clinical situation was well stabilized over a period of 4 months until the patient unfortunately died due to pneumonia/septicemia probably unrelated to bevacizumab therapy. Consecutive MRI demonstrated 4 important aspects: (1) considerable decrease of the contrast medium (CM)-enhanced radiation necrosis, (2) mixed response with respect to the meningiomatosis with stable and predominantly growing tumor lesions, (3) a new diffusion-weighted imaging (DWI) lesion in a CM-enhanced tumor as described in gliomas, which we did not interpret as a response to bevacizumab therapy, and (4) new thrombembolic infarcts, which are a known side-effect of bevacizumab treatment. Bevacizumab is effective in the treatment of radiation necrosis. We could not confirm the potential antitumor effect of bevacizumab in this patient. However, we could describe several new radiographic effects of bevacizumab therapy in malignant meningioma. (orig.) [German] In zwei aktuellen retrospektiven Kohortenstudien konnte eine Wirksamkeit von Bevacizumab bei Patienten mit rezidivierenden atypischen und

  18. Enhanced flux pinning in MOCVD-YBCO films through Zr additions : systematic feasibility studies.

    Energy Technology Data Exchange (ETDEWEB)

    Aytug, T.; Paranthaman, M.; Specht, E. D.; Zhang, Y.; Kim, K.; Zuev, Y. L.; Cantoni, C.; Goyal, A.; Christen, D. K.; Maroni, V. A.; Chen, Y.; Selvamanickam, V.; ORNL; SuperPower, Inc.

    2010-01-01

    Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

  19. Enhanced flux pinning in MOCVD-YBCO films through Zr additions: systematic feasibility studies

    International Nuclear Information System (INIS)

    Aytug, T; Paranthaman, M; Specht, E D; Zhang, Y; Kim, K; Zuev, Y L; Cantoni, C; Goyal, A; Christen, D K; Maroni, V A; Chen, Y; Selvamanickam, V

    2010-01-01

    Systematic effects of Zr additions on the structural and flux pinning properties of YBa 2 Cu 3 O 7-δ (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions ≤7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO 3 nanodots.

  20. Enhanced flux pinning in MOCVD-YBCO films through Zr additions: systematic feasibility studies

    Energy Technology Data Exchange (ETDEWEB)

    Aytug, T; Paranthaman, M; Specht, E D; Zhang, Y; Kim, K; Zuev, Y L; Cantoni, C; Goyal, A; Christen, D K [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Maroni, V A [Argonne National Laboratory, Argonne, IL 60439 (United States); Chen, Y; Selvamanickam, V, E-mail: aytugt@ornl.go [SuperPower, Incorporated, 450 Duane Avenue, Schenectady, NY 12304 (United States)

    2010-01-15

    Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {<=}7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

  1. Laser additive manufacturing of multimaterial tool inserts: a simulation-based optimization study

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2017-01-01

    laser additive manufacturing. The physical handling of multi-material in a SLM setup continues to be a primary challenge along with the selection of process parameters/plan to achieve the desired results – both challenges requiring considerable experimental undertakings. Consequently, numerical process...... which a layer of steel has been deposited using cold-spraying technique, such as to protect the microstructure of Ni during selective laser melting. The process modelled thus entails additively manufacturing a steel tool insert around the multi-material specimen with a goal of achieving a dense product......Selective laser melting is fast evolving into an industrially applicable manufacturing process. While components produced from high-value materials, such as Ti6Al4V and Inconel 718 alloys, are already being produced, the processing of multi-material components still remains to be achieved by using...

  2. Numerical Study of Natural Supercavitation Influenced by Rheological Properties of Turbulent Drag-Reducing Additives

    Directory of Open Access Journals (Sweden)

    Chen-Xing Jiang

    2014-08-01

    Full Text Available Natural supercavitations in water and turbulent drag-reducing solution were numerically simulated using unsteady Reynolds averaged Navier-Stokes (RANS scheme with mixture-multiphase model. The Cross viscosity equation was adopted to represent the fluid property of aqueous solution of drag-reducing additives. The characteristics of natural supercavity configuration and overall resistance of the navigating body were presented, respectively. The numerical simulation results indicated that, at the same cavitation number, the length and diameter of supercavity in drag-reducing solution are larger than those in water, and the drag coefficient of navigating body in solution is smaller than that in water; the surface tension plays an important role in incepting and maintaining the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitation, drag reduction, and decrease of turbulent vortex structures. Numerical simulation results are consistent with the available experimental data.

  3. Some Studies of the Effects of Additives on Cigarette Mainstream Smoke Properties. I. Flavorants

    Directory of Open Access Journals (Sweden)

    Rodgman A

    2014-12-01

    Full Text Available Examination of extensive laboratory data collected during the past four decades, particularly considerable unpublished data generated between the mid-1950s and the late 1970s, indicates that none of the materials used as flavorants on smoking tobacco products, particularly cigarettes marketed by a US manufacturer, imparts any significant adverse chemical or biological properties to the mainstream smoke (MSS from flavorant-treated tobacco, a conclusion reached by Doull et al. (1 in their assessment of available information on nearly 600 ingredients variously used as cigarette tobacco additives in the US Tobacco Industry. In a more recent detailed assessment of the chemical and biological properties reported in the published literature for the MSS from cigarettes fabricated with tobacco with or without one or more additives, Paschke et al. (2 reached a similar conclusion; namely, that in general, no significant increase in the biological activity (carcinogenicity, mutagenicity, and cytotoxicity of tobacco was reported from cigarettes containing added ingredients. Many flavorful tobacco additives listed by Doull et al. are structurally identical with or similar to highly polar, volatile components identified in the aqueous alcohol-soluble portion of cigarette MSS and tobacco. In the late 1950s, nearly two decades before the precise nature of the aqueous alcohol-soluble components of tobacco was defined, it was determined that their addition to cigarette tobacco produced no significant increase in the cigarette MSS of either the total polycyclic aromatic hydrocarbon (PAH content or the benzo[a]pyrene (B[a]P content, MSS components of considerable interest at that time.

  4. Ab initio study of effects of substitutional additives on the phase stability of γ-alumina

    International Nuclear Information System (INIS)

    Jiang Kaiyun; Music, Denis; Sarakinos, Kostas; Schneider, Jochen M

    2010-01-01

    Using ab initio calculations, we have evaluated two structural descriptions of γ-Al 2 O 3 , spinel and tetragonal hausmannite, and explored the relative stability of γ-Al 2 O 3 with respect to α-Al 2 O 3 with 2.5 at.% of Si, Cr, Ti, Sc, and Y additives to identify alloying element induced electronic structure changes that impede the γ to α transition. The total energy calculations indicate that Si stabilizes γ-Al 2 O 3 , while Cr stabilizes α-Al 2 O 3 . As Si is added, a bond length increase in α-Al 2 O 3 is observed, while strong and short Si-O bonds are formed in γ-Al 2 O 3 , consequently stabilizing this phase. On the other hand, Cr additions induce a smaller bond length increase in α-Al 2 O 3 than in γ-Al 2 O 3 , therefore stabilizing the α-phase. The bulk moduli of γ-Al 2 O 3 with these additives show no significant changes. The phase stability and elastic property data discussed here underline the application potential of Si alloyed γ-Al 2 O 3 for applications at elevated temperatures. Furthermore it is evident that the tetragonal hausmannite structure is a suitable description for γ-Al 2 O 3 .

  5. Load bearing and stiffness tailored NiTi implants produced by additive manufacturing: a simulation study

    Science.gov (United States)

    Rahmanian, Rasool; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael; Elahinia, Mohammad

    2014-03-01

    Common metals for stable long-term implants (e.g. stainless steel, Titanium and Titanium alloys) are much stiffer than spongy cancellous and even stiffer than cortical bone. When bone and implant are loaded this stiffness mismatch results in stress shielding and as a consequence, degradation of surrounding bony structure can lead to disassociation of the implant. Due to its lower stiffness and high reversible deformability, which is associated with the superelastic behavior, NiTi is an attractive biomaterial for load bearing implants. However, the stiffness of austenitic Nitinol is closer to that of bone but still too high. Additive manufacturing provides, in addition to the fabrication of patient specific implants, the ability to solve the stiffness mismatch by adding engineered porosity to the implant. This in turn allows for the design of different stiffness profiles in one implant tailored to the physiological load conditions. This work covers a fundamental approach to bring this vision to reality. At first modeling of the mechanical behavior of different scaffold designs are presented as a proof of concept of stiffness tailoring. Based on these results different Nitinol scaffolds can be produced by additive manufacturing.

  6. Peculiarities of the Enforcement of the European Arrest Warrant in the Case of an Illegal Liberty Deprivation

    Directory of Open Access Journals (Sweden)

    Minodora Ioana Rusu

    2010-06-01

    Full Text Available The illegal deprivation of liberty is, under the current context, one of the most serious offenses, being treated differently in the European Union. The need to prevent and combat this violation, it has led the European legislator to include it under different names in the European legislative act that governs the institution of the European arrest warrant. In this context, the European arrest warrant is the most important form of judicial cooperation in penal matters between the Member States of the EU, which is based on mutualrecognition of criminal judgments. The research conducted on how it is regulated the enforcement of the European arrest warrant in the case of illegal liberty deprivation in the European legislative act (the Framework Decision 2002/584/JHA leads to the conclusion that the legislature failed to mention the violation in question in the group of the violation for which it was not necessary the inspection of the double incrimination, but, still, including the offenses as kidnapping, illegal restraint and hostage-taking. Even if theRomanian legislator included this violation in the above mentioned group, this situation is not solved, because it will cause some problems in the request by the Romanian judicial authorities of the enforcement of such warrant. Another criticized issue, observed not only in the European legislative act, but also in the internal law, is related to the lack of stipulations, which can lead to the possibility of issuing and executing a European arrest warrant and for the execution of educational measures for illegal deprivation of liberty and also others. Also, in order to increase the effectiveness of the execution of a European arrest warrant, we consider that it should be granted executive powers of all courts of Romania. The originality of the work consists of the critical observations and the lege ferenda proposal which covers both the European legislativeact and the Romanian Law. At the same time

  7. Symmetry warrants rational cooperation by co-action in Social Dilemmas.

    Science.gov (United States)

    Sasidevan, V; Sinha, Sitabhra

    2015-08-12

    Is it rational for selfish individuals to cooperate? The conventional answer based on analysis of games such as the Prisoners Dilemma (PD) is that it is not, even though mutual cooperation results in a better outcome for all. This incompatibility between individual rationality and collective benefit lies at the heart of questions about the evolution of cooperation, as illustrated by PD and similar games. Here, we argue that this apparent incompatibility is due to an inconsistency in the standard Nash framework for analyzing non-cooperative games and propose a new paradigm, that of the co-action equilibrium. As in the Nash solution, agents know that others are just as rational as them and taking this into account lead them to realize that others will independently adopt the same strategy, in contrast to the idea of unilateral deviation central to Nash equilibrium thinking. Co-action equilibrium results in better collective outcomes for games representing social dilemmas, with relatively "nicer" strategies being chosen by rational selfish individuals. In particular, the dilemma of PD gets resolved within this framework, suggesting that cooperation can evolve in nature as the rational outcome even for selfish agents, without having to take recourse to additional mechanisms for promoting it.

  8. Transcatheter Arterial Embolization for Upper Gastrointestinal Nonvariceal Hemorrhage: Is Empiric Embolization Warranted?

    Energy Technology Data Exchange (ETDEWEB)

    Arrayeh, Elnasif; Fidelman, Nicholas, E-mail: nicholas.fidelman@ucsf.edu; Gordon, Roy L.; LaBerge, Jeanne M.; Kerlan, Robert K. [University of California San Francisco, Department of Radiology (United States); Klimov, Alexander; Bloom, Allan I. [Hadassah Hospital, Department of Radiology (Israel)

    2012-12-15

    Purpose: To determine whether transcatheter arterial embolization performed in the setting of active gastric or duodenal nonvariceal hemorrhage is efficacious when the bleeding source cannot be identified angiographically. Methods: Records of 115 adult patients who underwent visceral angiography for endoscopically documented gastric (50 patients) or duodenal (65 patients) nonvariceal hemorrhage were retrospectively reviewed. Patients were subdivided into three groups according to whether angiographic evidence of arterial hemorrhage was present and whether embolization was performed (group 1 = no abnormality, no embolization; group 2 = no abnormality, embolization performed [empiric embolization]; and group 3 = abnormality present, embolization performed). Thirty-day rates and duration of primary hemostasis and survival were compared.ResultsFor patients with gastric sources of hemorrhage, the rate of primary hemostasis at 30 days after embolization was greater when embolization was performed in the setting of a documented angiographic abnormality than when empiric embolization was performed (67% vs. 42%). The rate of primary hemostasis at 30 days after angiography was greater for patients with duodenal bleeding who either underwent empiric embolization (60%) or embolization in the setting of angiographically documented arterial hemorrhage (58%) compared with patients who only underwent diagnostic angiogram (33%). Patients with duodenal hemorrhage who underwent embolization were less likely to require additional invasive procedures to control rebleeding (p = 0.006). Conclusion: Empiric arterial embolization may be advantageous in patients with a duodenal source of hemorrhage but not in patients with gastric hemorrhage.

  9. Right-Turn Traffic Volume Adjustments in Traffic Signal Warrant Analysis

    Science.gov (United States)

    2015-01-01

    To accomplish this research, a comprehensive literature review of existing guidelines and findings based on national and local studies was conducted. Ultimately, guidelines for consistent application for adjusting right-turn traffic volumes were deve...

  10. Strategic Petroleum Reserve (SPR) additional geologic site characterization studies, Bryan Mound Salt Dome, Texas

    Energy Technology Data Exchange (ETDEWEB)

    Neal, J.T. [Sandia National Labs., Albuquerque, NM (United States); Magorian, T.R.; Ahmad, S. [Acres International Corp., Amherst, NY (United States)

    1994-11-01

    This report revises the original report that was published in 1980. Some of the topics covered in the earlier report were provisional and it is now practicable to reexamine them using new or revised geotechnical data and that obtained from SPR cavern operations, which involves 16 new caverns. Revised structure maps and sections show interpretative differences as compared with the 1980 report and more definition in the dome shape and caprock structural contours, especially a major southeast-northwest trending anomalous zone. The original interpretation was of westward tilt of the dome, this revision shows a tilt to the southeast, consistent with other gravity and seismic data. This interpretation refines the evaluation of additional cavern space, by adding more salt buffer and allowing several more caverns. Additional storage space is constrained on this nearly full dome because of low-lying peripheral wetlands, but 60 MMBBL or more of additional volume could be gained in six or more new caverns. Subsidence values at Bryan Mound are among the lowest in the SPR system, averaging about 11 mm/yr (0.4 in/yr), but measurement and interpretation issues persist, as observed values are about the same as survey measurement accuracy. Periodic flooding is a continuing threat because of the coastal proximity and because peripheral portions of the site are at elevations less than 15 ft. This threat may increase slightly as future subsidence lowers the surface, but the amount is apt to be small. Caprock integrity may be affected by structural features, especially the faulting associated with anomalous zones. Injection wells have not been used extensively at Bryan Mound, but could be a practicable solution to future brine disposal needs. Environmental issues center on the areas of low elevation that are below 15 feet above mean sea level: the coastal proximity and lowland environment combined with the potential for flooding create conditions that require continuing surveillance.

  11. Study of the stabilization of a loamy soil with addition of cement

    OpenAIRE

    Jonas Alexandre; Maria da Glória Alves; Thiago Vicente Lima

    2010-01-01

    The use of soil-cement bricks is considered a cheaper constructive method than the conventional (ceramic block or concrete), because one of the raw materials is abundant (the soil). The objective of the present work was to identify the soil of the “Codin” area, in the municipality of Campos of Goytacazes - RJ. After this identification, it was possible to determine the best line for the production of soil-cement, in the 9,5x 10x5 cm format, with lines containing the addition of 5% and 10% of ...

  12. Study of the stabilization of a loamy soil with addition of cement

    Directory of Open Access Journals (Sweden)

    Jonas Alexandre

    2010-05-01

    Full Text Available The use of soil-cement bricks is considered a cheaper constructive method than the conventional (ceramic block or concrete, because one of the raw materials is abundant (the soil. The objective of the present work was to identify the soil of the “Codin” area, in the municipality of Campos of Goytacazes - RJ. After this identification, it was possible to determine the best line for the production of soil-cement, in the 9,5x 10x5 cm format, with lines containing the addition of 5% and 10% of cement in volume.

  13. Do ultra-orphan medicinal products warrant ultra-high prices? A review

    Directory of Open Access Journals (Sweden)

    Picavet E

    2013-06-01

    Full Text Available Eline Picavet,1 David Cassiman,2 Steven Simoens1 1Department of Pharmaceutical and Pharmacological Sciences, KU Leuven, Leuven, Belgium; 2Department of Hepatology, University Hospital Leuven, Leuven, Belgium Abstract: Ultra-orphan medicinal products (ultra-OMPs are intended for the treatment, prevention, or diagnosis of ultra-rare diseases, ie, life-threatening or chronically debilitating diseases that affect less than one per 50,000 individuals. Recently, high prices for ultra-OMPs have given rise to debate on the sustainability and justification of these prices. The aim of this article is to review the international scientific literature on the pricing of ultra-OMPs and to provide an overview of the current knowledge on the drivers of ultra-OMP pricing. The pricing process of ultra-OMPs is a complex and nontransparent issue. Evidence in the literature seems to indicate that ultra-OMPs are priced according to rarity and what the manufacturer believes the market will bear. Additionally, there appears to be a trend between the price of an ultra-OMP and the number of available alternatives. Patients, third-party payers, and pharmaceutical companies could benefit from more transparent pricing strategies. With a view to containing health care costs, it is likely that cost-sharing strategies, such as performance-based risk sharing arrangements, will become increasingly more important. However, it is vital that any measures for price control are consistent with the intended goals of the incentives to promote the development of new OMPs. Ideally, a balance must be struck between attaining affordable prices for ultra-OMPs and securing a realistic return on investment for the pharmaceutical industry. Keywords: ultra-orphan medicinal product, ultra-rare disease, pricing

  14. Kaolinite flocculation induced by smectite addition - a transmission X-ray microscopic study.

    Science.gov (United States)

    Zbik, Marek S; Song, Yen-Fang; Frost, Ray L

    2010-09-01

    The influence of smectite addition on kaolinite suspensions in water was investigated by transmission X-ray microscopy (TXM) and Scanning Electron Microscopy (SEM). Sedimentation test screening was also conducted. Micrographs were processed by the STatistic IMage Analysing (STIMAN) program and structural parameters were calculated. From the results of the sedimentation tests important influences of small smectite additions to about 3wt.% on kaolinite suspension flocculation has been found. In order to determine the reason for this smectite impact on kaolinite suspension, macroscopic behaviour micro-structural examination using Transmission X-ray Microscope (TXM) and SEM has been undertaken. TXM & SEM micrographs of freeze-dried kaolinite-smectite suspensions with up to 20% smectite showed a high degree of orientation of the fabric made of highly oriented particles and greatest density when 3wt.% of smectite was added to the 10wt.% dense kaolinite suspension. In contrast, suspensions containing pure kaolinite do not show such platelet mutual orientation but homogenous network of randomly oriented kaolinite platelets. This suggests that in kaolinite-smectite suspensions, smectite forms highly oriented basic framework into which kaolinite platelets may bond in face to face preferential contacts strengthening structure and allowing them to show plastic behaviour which is cause of platelets orientation. Copyright 2010 Elsevier Inc. All rights reserved.

  15. Borate electrolyte additives for high voltage lithium nickel manganese oxide electrode: A comparative study

    International Nuclear Information System (INIS)

    Chen, Zhiting; Wang, Cun; Xing, Lidan; Wang, Xianshu; Tu, Wenqiang; Zhu, Yunmin; Li, Weishan

    2017-01-01

    Highlights: •TMB and TEB effective improve the cyclic stability of LNMO at high voltage. •The performance of LNMO with TMB-containing electrolyte is superior to that of TEB. •LNMO shows catalytic effect on the oxidation reaction of TEB. •The film generated in TMB shows better ability on suppressing LNMO shedding than TEB. -- Abstract: Trimethyl borate (TMB) and triethyl borate (TEB) are used as film-forming electrolyte additives for high voltage Lithium nickel manganese oxide (LNMO) cathode. DFT calculation and initial charge curve of LNMO reveal that the oxidation activity of TEB is higher than that of TMB. Addition of 2% TMB and 2% TEB effectively improve the capacity retention of high voltage LNMO from 23.4% to 85.3% and 72.6% after 600 cycles, respectively. The film generated in TMB-containing electrolyte shows better ability on suppressing the LNMO shedding in comparison with that of TEB, resulting in higher capacity retention of LNMO in TMB-containing electrolyte at high voltage. The superior performance of LNMO with TMB-containing electrolyte should be ascribed to its less intense film-forming reaction which generates a denser protective surface film on LNMO surface. However, why LNMO shows catalyzation effect on TEB oxidation but not on TMB is unclear, which needs further intensive investigation.

  16. Habits of cell phone usage and sperm quality - does it warrant attention?

    Science.gov (United States)

    Zilberlicht, Ariel; Wiener-Megnazi, Zofnat; Sheinfeld, Yulia; Grach, Bronislava; Lahav-Baratz, Shirly; Dirnfeld, Martha

    2015-09-01

    Male infertility constitutes 30-40% of all infertility cases. Some studies have shown a continuous decline in semen quality since the beginning of the 20th century. One postulated contributing factor is radio frequency electromagnetic radiation emitted from cell phones. This study investigates an association between characteristics of cell phone usage and semen quality. Questionnaires accessing demographic data and characteristics of cell phone usage were completed by 106 men referred for semen analysis. Results were analysed according to WHO 2010 criteria. Talking for ≥1 h/day and during device charging were associated with higher rates of abnormal semen concentration (60.9% versus 35.7%, P cell phone usage may bear adverse effects on sperm concentration. Investigation using large-scale studies is thus needed. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  17. Twenty Years of Brassinosteroids : Steroidal Plant Hormones Warrant Better Crops for the XXI Century

    NARCIS (Netherlands)

    Khripach, V.; Zhabinskii, V.; Groot, de C.P.G.M.

    2000-01-01

    The discovery of brassinosteroids (BS) just over 20 years ago opened a new era in studies of bio-regulation in living organisms. Previously, the only known role of steroids as hormones was in animals and fungi; now a steroidal hormone in plants had been added. Progress in brassinosteroid research

  18. 78 FR 20717 - Endangered and Threatened Wildlife and Plants; Proposed Endangered, Threatened, and Not Warranted...

    Science.gov (United States)

    2013-04-05

    ...). Although indirect age validation studies for S. lewini are still inconclusive, bomb radiocarbon and calcein... the ESA: Northwest Atlantic and Gulf of Mexico (NW Atlantic & GOM DPS); Central and Southwest Atlantic... States (from New Jersey to Florida) to Brazil, including the Gulf of Mexico and Caribbean Sea. In the...

  19. Short-term additional enfuvirtide therapy is associated with a greater immunological recovery in HIV very late presenters: a controlled pilot study.

    Science.gov (United States)

    Bonora, S; Calcagno, A; Cometto, C; Fontana, S; Aguilar, D; D'Avolio, A; Gonzalez de Requena, D; Maiello, A; Dal Conte, I; Lucchini, A; Di Perri, G

    2012-02-01

    To evaluate whether the addition of enfuvirtide to standard highly active antiretroviral therapy (HAART) could confer immunovirological benefits in human immunodeficiency virus (HIV)-infected very late presenters. The current study is an open comparative therapeutic trial of standard protease inhibitor (PI)-based HAART ± additional enfuvirtide in treatment-naïve deeply immunologically impaired HIV-positive patients. Very late presenters (CD4 HIV RNA was intensively monitored in the first month, and, thereafter, monthly, as for CD4+ cell count and percentage, clinical data, and plasma drug concentrations. Of 22 enrolled patients (11 per arm), 19 completed the study (10 in the ENF arm). Baseline CD4+ cell counts and % were comparable, with 20 CD4+/mm(3) (12-37) and a percentage of 3.3 (1.7-7.1) in the ENF arm, and 16 CD4+/mm(3) (9-29) and a percentage of 3.1 (2.3-3.8) in the CO arm, respectively. The baseline viral load was also comparable between the two arms, with 5.77 log10 (5.42-6) and 5.39 log10 (5.06-6) in the ENF and CO arms, respectively. Enfuvirtide recipients had higher CD4+ percentage at week 8 (7.6 vs. 3.6%, p = 0.02) and at week 24 (10.7 vs. 5.9%, p = 0.02), and a greater CD4+ increase at week 24 (207 vs. 134 cells/mm(3), p = 0.04), with 70% of enfuvirtide intakers versus 12.5% of controls who achieved a CD4+ cell count >200/mm(3) (p = 0.01). At 48 weeks, patients in the ENF arm had CD4+ cell counts higher than controls (251 vs. 153cells/mm(3), p = 0.04) and were also found to be faster in reaching a CD4 cell count over 200/mm(3): 18 (8-24) versus 48 (36-108) weeks (p = 0.01). Viral load decay at week 4 was greater in the ENF arm (-3 vs. -2.2 log, p = 0.04), while the proportion of patients with viral load discovered HIV-positive patients with very low CD4+ cell counts. Induction strategies using an enfuvirtide-based approach in such subjects warrant further investigation.

  20. Addition of ketamine or dexmedetomidine to lignocaine in intravenous regional anesthesia: A randomized controlled study

    Directory of Open Access Journals (Sweden)

    Alok Kumar

    2012-01-01

    Results: Shortened sensory and motor block onset times (69.17 min and 7.83 min respectively, P < 0.0001 and improved quality of anesthesia (satisfaction score = 3, P < 0.05 were found in ketamine group. Visual analog scale scores (3.21 ± 0.41 were comparable while time to first analgesic requirement (166.25 ± 25.89 min, P < 0.0001 was significantly longer in dexmedetomidine group after tourniquet release. Conclusion: We conclude that the addition of 1 mcg/kg of body weight dexmedetomidine or 0.5 mg/kg of body weight ketamine to lignocaine for IVRA improves quality of anesthesia and perioperative analgesia without causing side effects. We considered ketamine reduced the time for onset of block, delayed the onset of tourniquet pain, and reduced postoperative analgesic requirement and had a better patient satisfaction than placebo or dexmedetomidine.

  1. Thermodynamic Study of the Nickel Addition in Zinc Hot-Dip Galvanizing Baths

    Science.gov (United States)

    Pistofidis, N.; Vourlias, G.

    2010-01-01

    A usual practice during zinc hot-dip galvanizing is the addition of nickel in the liquid zinc which is used to inhibit the Sandelin effect. Its action is due to the fact that the ζ (zeta) phase of the Fe-Zn system is replaced by the Τ (tau) phase of the Fe-Zn-Ni system. In the present work an attempt is made to explain the formation of the Τ phase with thermodynamics. For this reason the Gibbs free energy changes for Τ and ζ phases were calculated. The excess free energy for the system was calculated with the Redlich-Kister polyonyme. From this calculation it was deduced that the Gibbs energy change for the tau phase is negative. As a result its formation is spontaneous.

  2. Characteristic study of chitosan addition in Tilapia (Oreochromis niloticus) bone based gelatin film

    Science.gov (United States)

    Atmaka, W.; Yudhistira, B.; Putro, M. I. S.

    2018-03-01

    Tilapia (Oreochromis niloticus) is one of popular fish species in Indonesia. The high number in tilapia’s production and export of tilapia resulting in the increase of bone fish waste. an attempt to decrease the amount of the aforementioned waste, the fish bones were turned into gelatine. The gelatine produced from this waste can be put to good use by turning it into edible film due to its high water resistance and low tensile strength value. However, in order to make a proper film, both the water resistance and the tensile strength value needs another appropriate additional biopolymer. In this case, the appropriate biopolymer needed both to form the film and to repair its characteristics is chitosan. The purpose of this research is to find out the effect of the chitosan addition on the tilapia bone based gelatine film. The research used several mixtures of gelatine (G) and chitosan (C) with the following ratio: G100:C0 (GC1), G75:C25 (GC2), G50:C50 (GC3), G25:C75 (GC4), G0:C100 (GC5). ANOVA results (Psolubility, tensile strength, elongation at break, Fourier Transform Infrared (FTIR), color a, and color b but no significant effects on the vapor permeability and color L. The best result is shown on GC2 with thickness 0.119 mm; solubility 74.95%; tensile strength 2.635 Mpa; elongation at break 68.26%; water vapor permeability 5.897 g/h m2 and FTIR. The parameters in GC2 shows good compatibility between the two biopolymers.

  3. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    Science.gov (United States)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  4. Hepatic pseudoaneurysm after traumatic liver injury; is CT follow-up warranted?

    DEFF Research Database (Denmark)

    Østerballe, Lene; Helgstrand, Frederik; Axelsen, Thomas

    2014-01-01

    INTRODUCTION: Hepatic pseudoaneurysm (HPA) is a rare complication after liver trauma, yet it is potentially fatal, as it can lead to sudden severe haemorrhage. The risk of developing posttraumatic HPA is one of the arguments for performing follow-up CT of patients with liver injuries. The aim...... no treatment failures. There was no correlation between the severity of the liver injury and development of HPA. 5 out of 7 patients were asymptomatic and would have been discharged without treatment if the protocol did not include a default follow-up CT. CONCLUSIONS: In conclusion, this study shows that HPA...

  5. Paranormal phenomena in the medical literature sufficient smoke to warrant a search for fire.

    Science.gov (United States)

    Bobrow, Robert S

    2003-06-01

    Paranormal phenomena - events that cannot be explained by existing science - are regularly reported in medicine. Surveys have shown that a majority of the population of the United States and Great Britain hold at least one paranormal belief. Information was retrieved by MEDLINE searches using keywords 'paranormal' and 'psychic', and from the author's own collection. Reports are predominantly by physicians, and from peer-reviewed, MEDLINE-indexed literature. This is a representative sample, as there is no database for paranormal medical phenomena. Presented and discussed are: a case of systemic lupus erythematosis ameliorated by witchcraft; an analysis of studies on distant healing; acupuncture, as a bridge between what is now accepted but recently would have been deemed paranormal; a carefully-done study of a psychic; auditory hallucinations informing a patient, correctly, that she had a brain tumor; two nearly-identical lay press reports of self-predicted death; lycanthropy (the delusion of being an animal); the development of Carl Jung's collective unconscious; hypnosis - still questioned despite documented therapeutic benefit, and a well-researched report of a person speaking a foreign language, apparently unlearned (xenoglossy) while hypnotized; and multiple examples of children who spout the details of the life of an unknown, deceased person. The inability of existing paradigms to explain these observations does not negate them; rather, it elucidates a need for more research.

  6. A Delphi Study of Additive Manufacturing Applicability for United States Air Force Civil Engineer Contingency Operations

    Science.gov (United States)

    2015-03-26

    be known as a Delphi study. Delphi Strengths. The Delphi approach was named after the Oracle at Delphi, a prominent figure in ancient Greek ... mythology who “was able to predict the future with infallible authority” (Clayton, 1997:374). The name is fitting as a Delphi study is often used to predict

  7. Te Rita Papesch: Case Study of an Exemplary Learner of Maori as an Additional Language

    Science.gov (United States)

    Ratima, Matiu Tai; Papesch, Te Rita

    2014-01-01

    This paper presents a case study of the life experiences of one exemplar adult second language Maori learner--Te Rita Papesch. Te Rita was one of 17 participants who were interviewed as a part of the first author's PhD study which sought to answer the question: what factors lead to the development of proficiency in te reo Maori amongst adult…

  8. Focal thyroid incidentalomas identified with whole-body FDG-PET warrant further investigation.

    LENUS (Irish Health Repository)

    Prichard, R S

    2012-02-01

    Fluorodeoxyglucose (FDG) whole body positron emission computed tomography (PET-CT) detects clinically occult malignancy. The aim of this study was to assess the prevalence and significance of focal thyroid 18F - fluorodeoxyglucose uptake. A retrospective review of all patients who had FDG PET-CT examinations, in a single tertiary referral centre was performed. PET scan findings and the final pathological diagnosis were collated. 2105 scans were reviewed. Focal uptake was identified in 35 (1.66%) patients. Final surgical histology was available on eight patients, which confirmed papillary carcinoma in four (20%) patients and lymphoma and metastatic disease in two patients respectively. This gave an overall malignancy rate in focal thyroid uptake of at least 33%. Thyroid incidentalomas occurred with a frequency of 2.13%, with an associated malignancy rate of at least 33% in focal thyroid uptake. The high malignancy rate associated with focal thyroid uptake mandates further investigation in medically fit patients.

  9. Occurrence of DNET and other brain tumors in Noonan syndrome warrants caution with growth hormone therapy.

    Science.gov (United States)

    McWilliams, Geoffrey D; SantaCruz, Karen; Hart, Blaine; Clericuzio, Carol

    2016-01-01

    Noonan syndrome (NS) is an autosomal dominant developmental disorder caused by mutations in the RAS-MAPK signaling pathway that is well known for its relationship with oncogenesis. An 8.1-fold increased risk of cancer in Noonan syndrome has been reported, including childhood leukemia and solid tumors. The same study found a patient with a dysembryoplastic neuroepithelial tumor (DNET) and suggested that DNET tumors are associated with NS. Herein we report an 8-year-old boy with genetically confirmed NS and a DNET. Literature review identified eight other reports, supporting the association between NS and DNETs. The review also ascertained 13 non-DNET brain tumors in individuals with NS, bringing to 22 the total number of NS patients with brain tumors. Tumor growth while receiving growth hormone (GH) occurred in our patient and one other patient. It is unknown whether the development or progression of tumors is augmented by GH therapy, however there is concern based on epidemiological, animal and in vitro studies. This issue was addressed in a 2015 Pediatric Endocrine Society report noting there is not enough data available to assess the safety of GH therapy in children with neoplasia-predisposition syndromes. The authors recommend that GH use in children with such disorders, including NS, be undertaken with appropriate surveillance for malignancies. Our case report and literature review underscore the association of NS with CNS tumors, particularly DNET, and call attention to the recommendation that clinicians treating NS patients with GH do so with awareness of the possibility of increased neoplasia risk. © 2015 Wiley Periodicals, Inc.

  10. Influence of additives on thermoresponsive polymers in aqueous media: a case study of poly(N-isopropylacrylamide).

    Science.gov (United States)

    Umapathi, Reddicherla; Reddy, P Madhusudhana; Rani, Anjeeta; Venkatesu, Pannuru

    2018-04-18

    Thermoresponsive polymers (TRPs) in different solvent media have been studied over a long period and are important from both scientific and technical points of view. Despite numerous studies on the behavior of TRPs with various additives, the interactions of additives with TRPs are still poorly understood. Moreover, despite the vast available literature regarding the biomolecular interactions between various TRPs and naturally occurring additives, it is not possible to provide a unifying declaration about the behavior of different additives, in particular at the phase transition temperature of the polymer. However, potential reviews that describe the behavior of additives as stimuli upon the phase transition of TRPs are also absent. A lack of sufficient knowledge regarding the responses of TRPs to additives as stimuli has hindered the expansion of the wide spectrum of applications of these polymers. Therefore, it was proposed to review the responses of TRPs in the presence of various additives in aqueous media. In-depth knowledge acquired via a literature survey has drawn our attention towards filling this gap by analyzing the interactions of TRPs with different additives. In this perspective, we have systematically examined the stability, aggregation, and phase transition behaviours of various polymers in the presence of different additives. The perspective on the influence of additives as stimuli on the behavior of TRPs in an aqueous medium will provide new reliable information about intramolecular interactions between interior polymer segments as well as intermolecular interactions between TRPs and additive molecules, which will be helpful for industrialists in the preparation of new polymeric materials for drug-delivery systems.

  11. Study of flow stress and spall strength of additively manufactured Ti-6-4 alloy

    Science.gov (United States)

    Cohen, Amitay; Paris, Vitaly; Yosef-Hai, Arnon; Gudinetsky, Eli; Tiferet, Eitan

    2017-06-01

    The use of additive manufacturing (AM) by Electron Beam Melting (EBM) or Selective Laser Melting (SLM) has extensively grown in the past few years. A major goal in AM is to manufacture materials with mechanical properties at least as good as traditionally manufactured materials. In this work we present results of planar impact tests and Split Hopkinson Pressure Bar tests (SHPB) on Ti-6-4 manufactured by EBM and SLM processes. Results of planar impact tests on SLM samples display slightly higher spall strength compared to EBM while the stress at Hugoniot elastic limit (HEL) is practically the same. Stress strain curves based on SHPB measurements at two different strain rates present similar plastic flow stresses for SLM and EBM processed Ti-6-4 alloy, while the flow stress is about 20% higher than reported for commercial reference material. The strain to failure of both materials shows considerable strain rate sensitivity. The results of post-mortem analysis of spall fracture will also be presented.

  12. Sulfur Fixation by Chemically Modified Red Mud Samples Containing Inorganic Additives: A Parametric Study

    Directory of Open Access Journals (Sweden)

    Yang Liu

    2016-01-01

    Full Text Available Sulfur retention ability of Bayer red mud from alumina plant was investigated. Bayer red mud modified by fusel salt and waste mother liquor of sodium ferrocyanide as the main sulfur fixation agent and the calcium based natural mineral materials as servicing additives; the experimental results showed the following: (1 Through 10 wt% waste mother liquor of sodium ferrocyanide modifying Bayer red mud, sulfur fixation rate can increase by 13 wt%. (2 Magnesium oxide can obviously improve the sulfur fixation performance of Bayer red mud and up to a maximum sulfur fixation rate of 47 wt% at adding 1 wt% magnesium oxide. (3 Dolomite enhanced the sulfur fixation performances with the sulfur fixation rate of 68 wt% in optimized condition. (4 Vermiculite dust reduced sulfur dioxide during the fixed-sulfur process of modified Bayer red mud, and the desulphurization ration could reach up to a maximum 76 wt% at 950°C. (5 An advanced three-component sulfur fixation agent was investigated, in which the optimized mass ratio of modified Bayer red mud, dolomite, and vermiculite dust was 70 : 28 : 2 in order, and its sulfur fixation efficiency has reached to a maximum 87 wt% under its 20 wt% dosage in the coal.

  13. Study on Additional Carrier Sensing for IEEE 802.15.4 Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Bih-Hwang Lee

    2010-06-01

    Full Text Available Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs. The slotted carrier sense multiple access with collision avoidance (CSMA/CA is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC delay and power consumption of CCA detection.

  14. Study on additional carrier sensing for IEEE 802.15.4 wireless sensor networks.

    Science.gov (United States)

    Lee, Bih-Hwang; Lai, Ruei-Lung; Wu, Huai-Kuei; Wong, Chi-Ming

    2010-01-01

    Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs). The slotted carrier sense multiple access with collision avoidance (CSMA/CA) is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA) detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS) algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC) delay and power consumption of CCA detection.

  15. Regression with Small Data Sets: A Case Study using Code Surrogates in Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Kamath, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fan, Y. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-04-11

    There has been an increasing interest in recent years in the mining of massive data sets whose sizes are measured in terabytes. While it is easy to collect such large data sets in some application domains, there are others where collecting even a single data point can be very expensive, so the resulting data sets have only tens or hundreds of samples. For example, when complex computer simulations are used to understand a scientific phenomenon, we want to run the simulation for many different values of the input parameters and analyze the resulting output. The data set relating the simulation inputs and outputs is typically quite small, especially when each run of the simulation is expensive. However, regression techniques can still be used on such data sets to build an inexpensive \\surrogate" that could provide an approximate output for a given set of inputs. A good surrogate can be very useful in sensitivity analysis, uncertainty analysis, and in designing experiments. In this paper, we compare different regression techniques to determine how well they predict melt-pool characteristics in the problem domain of additive manufacturing. Our analysis indicates that some of the commonly used regression methods do perform quite well even on small data sets.

  16. Limitations of metformin use in patients with kidney disease: are they warranted?

    Science.gov (United States)

    Vasisht, K P; Chen, S-C; Peng, Y; Bakris, G L

    2010-12-01

    To show that metformin, one of the most widely used agents, is contraindicated in patients with diabetes having chronic kidney disease (CKD) (i.e. serum creatinine >1.5 mg/dl) secondary to fear of lactic acidosis. The overall incidence of lactic acidosis is estimated at an upper limit of eight cases per 100 000 patient-years. We evaluated metformin use in two cohorts, one from the University of Chicago Diabetes Center and the other from National Health and Nutrition Examination Survey (NHANES) 1999-2006. Estimated glomerular filtration rate (eGFR) was calculated using the re-expressed Modification of Diet in Renal Disease (MDRD) Study equation and compared to serum creatinine. We hypothesized that metformin is used in patients with undetected advanced CKD (i.e. serum creatinine is ≥1.5 mg/dl). A chi-squared test was used to compare per cent differences of metformin use across demographic variables and eGFR in the NHANES cohort. At the University of Chicago Diabetes Center, 36 of 234 (15.3%) patients with an eGFR of metformin. Data from NHANES, age >18 years and eGFR metformin. We conclude that metformin utilization occurs with a higher frequency than predicted by serum creatinine in people with eGFR <60 ml/min/1.73 m(2) . Given the very low incidence of lactic acidosis, the recommendation should be changed to reflect eGFR cut-off values rather than serum creatinine. © 2010 Blackwell Publishing Ltd.

  17. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    Science.gov (United States)

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  18. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    Science.gov (United States)

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy.

  19. Pediatric near-drowning events: do they warrant trauma team activation?

    Science.gov (United States)

    Chotai, Pranit N; Manning, Lisa; Eithun, Benjamin; Ross, Joshua C; Eubanks, James W; Hamner, Chad; Gosain, Ankush

    2017-05-15

    The purpose of this study was to determine the incidence of traumatic injuries, factors associated with mortality, and need for pediatric trauma surgery involvement for drowning and near-drowning events in children. An institutional review board-approved, retrospective chart review was performed at three American College of Surgeons-verified Pediatric Trauma Centers (2011-2014). Patients with International Classification of Diseases, Ninth Revision, codes or E-codes for fatal-nonfatal drowning, fall into water, accidental drowning, or submersion were included. Bivariate analysis using chi-square or Fisher exact test for nominal variables and Mann-Whitney U test for continuous variables was performed. A total of 363 patients (median 3.17 y [18 d-17 y]) met the inclusion criteria. Drowning sites included pool (81.5%), bathtub (12.9%), and natural water (5.2%). A witnessed fall or dive was reported in 34.9%, 57.9% did not fall or dive, and 7% had an unwitnessed event. Most patients did not undergo cervical spine (83%) or brain imaging (75.5%). Seven patients (1.92%) had associated soft tissue injuries. Two patients (0.006%) received surgical intervention (bronchoscopy and extracorporeal membrane oxygenation) within 24 h of presentation. Only 2.2% were admitted to the pediatric trauma service. The percentage of patients discharged home from the emergency department was 10.2%. Overall mortality was 12.4%. Factors associated with mortality included transfer from outside hospital (P = 0.016), presence of hypothermia on arrival (P drowning in a pool (P = 0.013), or undergoing brain cooling at admission (P = 0.011). This is the largest reported series of pediatric near-drowning events. Only rarely did patients require immediate surgical attention and the majority were admitted to nonsurgical services. These data suggest that routine pediatric trauma surgery service involvement in patients with near-drowning events may be unnecessary. Copyright © 2017 Elsevier

  20. Lesion removal and lesion addition algorithms in lung volumetric data sets for perception studies

    Science.gov (United States)

    Madsen, Mark T.; Berbaum, Kevin S.; Ellingson, Andrew; Thompson, Brad H.; Mullan, Brian F.

    2006-03-01

    Image perception studies of medical images provide important information about how radiologists interpret images and insights for reducing reading errors. In the past, perception studies have been difficult to perform using clinical imaging studies because of the problems associated with obtaining images demonstrating proven abnormalities and appropriate normal control images. We developed and evaluated interactive software that allows the seamless removal of abnormal areas from CT lung image sets. We have also developed interactive software for capturing lung lesions in a database where they can be added to lung CT studies. The efficacy of the software to remove abnormal areas of lung CT studies was evaluated psychophysically by having radiologists select the one altered image from a display of four. The software for adding lesions was evaluated by having radiologists classify displayed CT slices with lesions as real or artificial scaled to 3 levels of confidence. The results of these experiments demonstrated that the radiologist had difficulty in distinguishing the raw clinical images from those that had been altered. We conclude that this software can be used to create experimental normal control and "proven" lesion data sets for volumetric CT of the lung fields. We also note that this software can be easily adapted to work with other tissue besides lung and that it can be adapted to other digital imaging modalities.

  1. Study on Type C Coal Fly ash as an Additive to Molding Sand for Steel Casting

    Science.gov (United States)

    Palaniappan, Jayanthi

    2017-04-01

    Study of physio-chemical properties studies such as granulometric analysis, moisture, X ray fluorescence etc. were performed with Type C coal—combustion fly ash to investigate their potential as a distinct option for molding sand in foundry, thereby reducing the dependency on latter. Technological properties study such as compressive strength, tensile strength, permeability and compaction of various compositions of fly ash molding sand (10, 20 and 30 % fly ash substitute to chemically bonded sand) were performed and compared with silica molding sand. Steel casting production using this fly ash molding sand was done and the casting surface finish and typical casting parameters were assessed. It was noted that a good quality steel casting could be produced using type C fly ash molding sand, which effectively replaced 20 % of traditional molding sand and binders thereby providing greater financial profits to the foundry and an effective way of fly ash utilization (waste management).

  2. A comprehensive study on the effect of Ru addition to Pt electrodes ...

    Indian Academy of Sciences (India)

    Administrator

    The electro-oxidation of ethanol was studied over nanosized Pt and different compositions of ... The onset potential of ethanol electro-oxidation is lowered on bimetallic PtRu ..... Hogarth M P and Ralph T R 2002 Platinum Metals Review 46.

  3. Efficacy and safety assessment of microbiological feed additive for chicken broilers in tolerance studies

    Directory of Open Access Journals (Sweden)

    Kupryś-Caruk Marta

    2018-03-01

    Full Text Available Introduction: One aim of the study was to evaluate the impact when added to feed of the two potentially probiotic strains of lactic acid bacteria (LAB Lactobacillus plantarum K KKP 593/p and Lactobacillus rhamnosus KKP 825 on production performance, health, and the composition of gut microbiota. The complementary aim was to assess the safety of these strains in broiler rearing.

  4. Genome-Wide Association Study of Intelligence: Additive Effects of Novel Brain Expressed Genes

    Science.gov (United States)

    Loo, Sandra K.; Shtir, Corina; Doyle, Alysa E.; Mick, Eric; McGough, James J.; McCracken, James; Biederman, Joseph; Smalley, Susan L.; Cantor, Rita M.; Faraone, Stephen V.; Nelson, Stanley F.

    2012-01-01

    Objective: The purpose of the present study was to identify common genetic variants that are associated with human intelligence or general cognitive ability. Method: We performed a genome-wide association analysis with a dense set of 1 million single-nucleotide polymorphisms (SNPs) and quantitative intelligence scores within an ancestrally…

  5. Thermal analysis studies of Ge additive of Se-Te glasses

    International Nuclear Information System (INIS)

    Mohamed, M.; Abdel-Rahim, M.A.

    2016-01-01

    Ge x Se 50 Te 50-x (x= 5, 15, 20, 35 at.%) bulk glasses were synthesized by the melt quenching method. The amorphous nature of the investigated glasses was determined by X-ray diffraction. Results of differential scanning calorimetry (DSC) of the studied compositions under non-isothermal conditions were reported and discussed. The glass transition temperature (T g ), onset crystallization temperature (T c ), and crystallization peak temperature (T p ) were determined from DSC traces at different heating rates. It was found that the values of T g , T c , and T p rely on both composition and heating rate. A double crystallization stages were observed in the DSC results. Various kinetics parameters such as the glass transition energy (E g ), crystallization activation energy (E c ), and rate constant (K p ) were calculated. The glass-forming ability of the studied compositions was discussed as function of the determined kinetics parameters. (orig.)

  6. Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

    Energy Technology Data Exchange (ETDEWEB)

    Gujarati, Vivek P., E-mail: vivekgujarati@gmail.com; Deshpande, M. P., E-mail: vishwadeshpande@yahoo.co.in; Patel, Kamakshi R.; Chaki, S. H. [Department of Physics, Sardar Patel University, Vallabh Vidyanagar, Gujarat (India)

    2016-05-06

    Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

  7. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  8. Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode–Electrolyte Interface in Lithium-Ion Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Han [Chemical; Maglia, Filippo [BMW Group, Munich 80788, Germany; Lamp, Peter [BMW Group, Munich 80788, Germany; Amine, Khalil [Chemical; Chen, Zonghai [Chemical

    2017-12-13

    Current developments of electrolyte additives to stabilize electrode-electrolyte interface in Li-ion batteries highly rely on a trial-and-error search, which involves repetitive testing and intensive amount of resources. The lack of understandings on the fundamental protection mechanisms of the additives significantly increases the difficulty for the transformational development of new additives. In this study, we investigated two types of individual protection routes to build a robust cathode-electrolyte interphase at high potentials: (i) a direct reduction in the catalytic decomposition of the electrolyte solvent; and (ii) formation of a “corrosion inhibitor film” that prevents severely attack and passivation from protons that generated from the solvent oxidation, even the decomposition of solvent cannot not mitigated. Effect of three exemplary electrolyte additives: (i) lithium difluoro(oxalato)borate (LiDFOB); (ii) 3-hexylthiophene (3HT); and (iii) tris(hexafluoro-iso-propyl)phosphate (HFiP), on LiNi0.6Mn0.2Co0.2O2 (NMC 622) cathode were investigated to validate our hypothesis. It is demonstrated that understandings of both electrolyte additives and solvent are essential and careful balance between the cathode protection mechanism of additives and their side effects is critical to obtain optimum results. More importantly, this study opens up new directions of rational design of functional electrolyte additives for the next generation high-energy density lithium-ion chemistries.

  9. l-carnitine as a Potential Additive in Blood Storage Solutions: A Study on Erythrocytes

    OpenAIRE

    Soumya, R.; Carl, H.; Vani, R.

    2015-01-01

    Erythrocytes undergo various changes during storage (storage lesion) that in turn reduces their functioning and survival. Oxidative stress plays a major role in the storage lesion and antioxidants can be used to combat this stress. This study elucidates the effects of l-carnitine (LC) on erythrocytes of stored blood. Blood was obtained from male Wistar rats and stored (4 °C) for 20 days in CPDA-1 (citrate phosphate dextrose adenine) solution. Samples were divided into–(i) controls (ii) LC 10 ...

  10. Computerized analysis of isometric tension studies provides important additional information about vasomotor activity

    Directory of Open Access Journals (Sweden)

    Vincent M.B.

    1997-01-01

    Full Text Available Concentration-response curves of isometric tension studies on isolated blood vessels are obtained traditionally. Although parameters such as Imax, EC50 and pA2 may be readily calculated, this method does not provide information on the temporal profile of the responses or the actual nature of the reaction curves. Computerized data acquisition systems can be used to obtain average data that represent a new source of otherwise inaccessible information, since early and late responses may be observed separately in detail

  11. DRX study of the effects of aluminates and ferrites additions over bicalcium silicates formations

    Directory of Open Access Journals (Sweden)

    Triviño Vázquez, F.

    1990-12-01

    Full Text Available It must be measured the height that is obtained in the peaks indicated in the diffractograms of the compounds: CaO, SÍO2, β-C2S γ-C2S, C3A, C2F and C4AF, with the finality of study their mutual influences, and also study the aluminoferrites over such bicalcic silicates, obtained from differents raw mix. The adquired knowledges can be used to know the partial effects of such components in the elaboration of portland clinker.

    Estudio por DRX de los efectos de ¡as adiciones de ferritos y aluminatos sobre la formación de los silicatos bicálcicos, por medida de las alturas de los picos indicados en los difractogramas de los componentes: CaO, SÍO2, β -C2S, γ-C2S, C3A C2Fy C4AF, para estudiar sus influencias mutuas y las de los aluminoferritos sobre dichos silicatos bicálcicos, obtenidos a partir de distintos crudos. Los conocimientos adquiridos se pueden utilizar para saber los efectos parciales de dichos componentes en la fabricación de clinker portland.

  12. A comparative study of NiZn ferrites modified by the addition of cobalt

    Directory of Open Access Journals (Sweden)

    Pereira S.L.

    1999-01-01

    Full Text Available Off-stoichiometric NiZn ferrite was obtained by hydrothermal process and compacted in torus form under different pressures. Two samples A1 and A2 - cobalt doped (0.5 % were sintered at 1573 K in air atmosphere during 3 h. The magnetic properties were studied by vibrating sample magnetometry, Mössbauer spectroscopy and complex impedanciometry. X-ray diffraction and Hg porosimetry were used in order to determine the average grain size and the type of packing in the samples. Both samples exhibited superparamagnetic behavior in the hysteresis loop. This effect does not agree with Mössbauer results, which were fitted using Normos, a commercial computer program. All samples parameters were compared.

  13. Decontamination of solid matrices using supercritical CO2: study of contaminant-additives-CO2

    International Nuclear Information System (INIS)

    Galy, J.

    2006-11-01

    This work deals with the decontamination of solid matrices by supercritical CO 2 and more particularly with the study of the interactions between the surfactants and the CO 2 in one part, and with the interactions between the contaminant and the surfactants in another part. The first part of this study has revealed the different interactions between the Pluronics molecules and the supercritical CO 2 . The diagrams graphs have shown that the pluronics (PE 6100, PE 8100 and PE 10100) present a solubility in the supercritical CO 2 low but sufficient (0.1% m/m at 25 MPa and 313 K) for the studied application: the treatment of weak quantities of cerium oxide (or plutonium). An empirical approach based on the evolutions of the slops value and of the origin ordinates of the PT diagrams has been carried out to simulate the phase diagrams PT of the Pluronics. A modeling based on the state equations 'SAFT' (Statistical Associating Fluid Theory) has been studied in order to confirm the experimental results of the disorder points and to understand the role of the different blocks 'PEO' and 'PPO' in the behaviour of Pluronics; this modeling confirms the evolution of the slopes value with the 'CO 2 -phily' of the system. The measure of the surface tension in terms of the Pluronics concentration (PE 6100, 81000 and 10100) has shown different behaviours. For the PE 6100, the surface tension decreases when the surfactant concentration increases (at constant pressure and temperature); on the other hand, for the PE 8100 a slop rupture appears and corresponds to the saturation of the interface water/CO 2 and allows then to determine the Interface Saturation Concentration (ISC). The ISC value (at constant pressure and temperature) increases with an increase of the 'CO 2 -phily'). The model hydrophilous medium being an approximation, it has been replaced by a solid polar phase of CeO 2 . A parallel has been established between the evolution of the surface tension between the water and

  14. Shelf Life and Quality Study of Minced Tilapia with Nori and Hijiki Seaweeds as Natural Additives

    Directory of Open Access Journals (Sweden)

    Ingridy Simone Ribeiro

    2014-01-01

    Full Text Available The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage.

  15. Shelf Life and Quality Study of Minced Tilapia with Nori and Hijiki Seaweeds as Natural Additives

    Science.gov (United States)

    Ribeiro, Ingridy Simone; Shirahigue, Ligianne Din; Ferraz de Arruda Sucasas, Lia; Anbe, Lika; da Cruz, Pedro Gomes; Gallo, Cláudio Rosa; Carpes, Solange Teresinha; Marques, Marcos José; Oetterer, Marília

    2014-01-01

    The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage. PMID:25478593

  16. Biological effect of food additive titanium dioxide nanoparticles on intestine: an in vitro study.

    Science.gov (United States)

    Song, Zheng-Mei; Chen, Ni; Liu, Jia-Hui; Tang, Huan; Deng, Xiaoyong; Xi, Wen-Song; Han, Kai; Cao, Aoneng; Liu, Yuanfang; Wang, Haifang

    2015-10-01

    Titanium dioxide nanoparticles (TiO2 NPs) are widely found in food-related consumer products. Understanding the effect of TiO2 NPs on the intestinal barrier and absorption is essential and vital for the safety assessment of orally administrated TiO2 NPs. In this study, the cytotoxicity and translocation of two native TiO2 NPs, and these two TiO2 NPs pretreated with the digestion simulation fluid or bovine serum albumin were investigated in undifferentiated Caco-2 cells, differentiated Caco-2 cells and Caco-2 monolayer. TiO2 NPs with a concentration less than 200 µg ml(-1) did not induce any toxicity in differentiated cells and Caco-2 monolayer after 24 h exposure. However, TiO2 NPs pretreated with digestion simulation fluids at 200 µg ml(-1) inhibited the growth of undifferentiated Caco-2 cells. Undifferentiated Caco-2 cells swallowed native TiO2 NPs easily, but not pretreated NPs, implying the protein coating on NPs impeded the cellular uptake. Compared with undifferentiated cells, differentiated ones possessed much lower uptake ability of these TiO2 NPs. Similarly, the traverse of TiO2 NPs through the Caco-2 monolayer was also negligible. Therefore, we infer the possibility of TiO2 NPs traversing through the intestine of animal or human after oral intake is quite low. This study provides valuable information for the risk assessment of TiO2 NPs in food. Copyright © 2015 John Wiley & Sons, Ltd.

  17. Study on the interaction of the toxic food additive carmoisine with serum albumins: A microcalorimetric investigation

    International Nuclear Information System (INIS)

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-01-01

    Highlights: • Carmoisine binds to both the serum albumins with affinity of the order of 10 6 M −1 . • The binding was favored by negative enthalpy and positive entropy changes. • The binding was dominated by hydrophobic forces. • Carmoisine enhanced the thermal stability of both the proteins remarkably. - Abstract: The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10 6 M −1 and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5–8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy–entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine

  18. Comparative study of the addition compounds between lanthanides methane sulfonates (III) and aromatic amino-oxides as ligands

    International Nuclear Information System (INIS)

    Rosario Matos, J. do.

    1989-01-01

    The main goal of this thesis is to further develop the studies on the preparation and characterization of addition compounds obtained from the reaction of lanthanide methane sulfonates and aromatic amino oxides as ligands, pyridine-N-oxides as the picoline-N-oxides (2-pic NO, 3-pic NO and 4-picNO) in order to make a comparative study. (author)

  19. Does visual impairment lead to additional disability in adults with intellectual disabilities? A cross-sectional study

    NARCIS (Netherlands)

    Evenhuis, H.M.; Sjoukes, L.; Koot, H.M.; Kooijman, A.C.

    2009-01-01

    Background: This study addresses the question to what extent visual impairment leads to additional disability in adults with intellectual disabilities (ID). Method: In a multi-centre cross-sectional study of 269 adults with mild to profound ID, social and behavioural functioning was assessed with

  20. Immunity status in children with Bacilli Chalmette-Guarin addition's: A prospective study in Tehran, Iran

    International Nuclear Information System (INIS)

    Samileh, Noorbaksh; Ahmad, Siadati; Lida, F.; Farzaneh, A.; Mohammad, N.; Shahnaz, R.

    2006-01-01

    Objective was to determine the immunity status of children with Bacille Calmette-Guerin (BCG) lymphadenitis (patient group) and unaffected children (control group) in Iran. We performed this longitudinal case-control study on 75 children between 2 months to 14 years old in Rasool Akram and Markaz Tebbi Hospital, Tehran, Iran during the period of 2 years (2000-2002). Ninety percent of patients had normal immunoglobulin, 10% had low level, 96.1% had normal nitro blue tetrazolium test and 3.9% had lower activity. There was a significant difference in the total lymphocyte CD3,CD8, CD19, CD16/CD56 and natural killers (NK) cell but no significant difference in the CD4/CD8 ratio and CD4 between case (n=75) and control (n=100) groups. Thirty-eight cases with mild lymphoenia, isolated CD4, CD3, CD19, NK cells (CD16/CD56) deficiency in 3 (22%); idiopathic disseminated BCG infection (unknown immunodeficiency type) in 3 (22%) patients were observed. Thirty-eight cases are diagnosed as mild immune deficient without any previous recurrent infections (mild lymphopenia; Isolated CD4; CD3 or CD19 deficiency. Natural killers (CD16/CD56) deficiency in 3 (22%); idiopathic disseminated BCG infection (unknown immunodeficiency type) in 3 (22%) patients. The natural killers (CD16/CD56) deficient cases respond well to 3 antimycobacterial drugs without immunomodulator. Natural killer's cells deficiency not yet reported as a risk factor for progression and complication of BCG infection. All cases of idiopathic disseminated BCG infection (unknown immunodeficiency type) with nonlethal and indulgent BCG infections responded well to needle aspiration and antimycobacterial drugs with immunomodulator (gamma interferon). In cases with multiple and recurrent BCG lymphadenitis without any previous recurrent infection complete immunological studies should be carried out. Most cases with mild immune deficiency usually response well to needle aspiration alone or combine with antimycobacterial drugs. The

  1. Dynamics of proteins and of their hydration layer studied by neutron scattering and additional biophysical methods

    International Nuclear Information System (INIS)

    Gallat, Francois-Xavier

    2011-01-01

    This thesis work focused on the dynamics of proteins, surrounded by their hydration layer, a water shell around the protein vital for its biological function. Each of these components is accompanied by a specific dynamics which union reforms the complex energy landscape of the system. The joint implementation of selective deuteration, incoherent neutron scattering and tera-hertz spectroscopy allowed to explore the dynamics of proteins and that of the hydration shell. The influence of the folding state of protein on its dynamics has been studied by elastic neutron scattering. Globular proteins were less dynamic than its intrinsically disordered analogues. Themselves appear to be stiffer than non-physiological unfolded proteins. The oligomerization state and the consequences on the dynamics were investigated. Aggregates of a globular protein proved to be more flexible than the soluble form. In contrast, aggregates of a disordered protein showed lower average dynamics compared to the soluble form. These observations demonstrate the wide range of dynamics among the proteome. Incoherent neutron scattering experiences on the hydration layer of globular and disordered proteins have yielded information on the nature of water motion around these proteins. The measurements revealed the presence of translational motions concomitant with the onset of the transition dynamics of hydration layers, at 220 K. Measurements have also shown a stronger coupling between a disordered protein and its hydration water, compared to a globular protein and its hydration shell. The nature of the hydration layer and its influence on its dynamics has been explored with the use of polymers that mimic the water behavior and that act as a source of flexibility for the protein. Eventually, the dynamics of methyl groups involved in the dynamical changes observed at 150 and 220 K, was investigated. (author) [fr

  2. Food additives

    Science.gov (United States)

    ... GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Food additives URL of this page: //medlineplus.gov/ency/article/ ...

  3. Is Bringing Back Warrant Officers the Answer A Loot at How They Could Work in the Air Force Cyber Operations Career Field

    Science.gov (United States)

    2017-03-16

    fulfill that intent. In contrast, the Army, Navy and Marine Corps utilize warrant officers in a multitude of capacities, especially in highly... education and more generalized knowledge of commissioned officers. Warrant officer duties include supervising and managing the execution of cyberspace...trace his or her roots back to the British Royal Navy in the thirteenth century.28 The Crown awarded Royal Warrants to especially experienced sailors to

  4. Comparison studies of propylene oxide addition to phenyloctadecanol and phenyloctadecanoic acid and the surface activity studies of their sulphated products

    Directory of Open Access Journals (Sweden)

    Ahmed, M. H.M.

    2001-10-01

    Full Text Available Phenyloctadecanol and phenyloctadecanoic acid were produced via Lewis acid catalyzed reaction of benzene and oleyl alcohol (60 ºC or oleic acid at (80 ºC respectively. A comparison study was achieved for the addition of propylene oxide to both substrates in the presence of base (KOH and Lewis acid (SbCl5 catalysts. It was found that, the hydroxypropylation of both substrates at low temperature via Lewis acid catalyst is more preferable than via the base catalyst. The surface activity of the sulphated products was determined. The results revealed that, the samples produced from alcohol (phenyloctadecanol show a better surface activity than that from acid (phenyloctadecanoic acid. On the other hand the samples produced from both substrates using Lewis acid catalyst have a better surface activity than that produced with the base catalyst.Se ha obtenido feniloctadecanol y ácido feniloctadecanoico vía reacción catalizada ácido de Lewis a partir de benceno y alcohol oleílico (60º C o ácido oleico (80º C respectivamente. Se ha llevado a cabo un estudio comparativo por adición de óxido de propileno a ambos sustratos en presencia de base (KOH y ácido de Lewis (SbCl5 como catalizadores. Se encontró que la hidroxipropilación de ambos sustratos a baja temperatura mediante catálisis ácido de Lewis es preferible a la catálisis básica. Se determinó la actividad superficial de los productos sulfatados. Los resultados mostraron que las muestras producidas a partir de alcohol (feniloctadecanol tenían una mejor actividad superficial que las producidas a partir de ácido (ácido feniloctadecanoico. Por otro lado, las muestras producidas a partir de ambos sustratos utilizando catalizador ácido de Lewis tuvieron una actividad superficial mejor que las producidas con catálisis básica.

  5. Smokers' unprompted comments on cigarette additives during conversations about the genetic basis for nicotine addiction: a focus group study.

    Science.gov (United States)

    Philpott, Sydney E; Gehlert, Sarah; Waters, Erika A

    2018-04-13

    Research designed to elicit smokers' cognitive and affective reactions to information about chemicals that tobacco companies add to cigarettes ("additives") found that knowledge is limited. However, little is known about smokers' unprompted thoughts and feelings about additives. Such information could be used to shape future communication efforts. We explored the content and possible functions of spontaneous statements about cigarette additives made by smokers during a study examining reactions to learning about the genetic link to nicotine addiction. Adult smokers (N = 84) were recruited from a medium-sized Midwestern city. Focus groups (N = 13) were conducted between April-September 2012. Data were analyzed by 2 coders using thematic analysis. Comments about cigarette additives arose without prompting by the focus group moderator. Three main themes were identified: (1) discussing additives helped participants navigate the conceptual link between smoking and genetics, (2) additives were discussed as an alternative mechanism for addiction to cigarettes, and (3) additives provided an alternative mechanism by which cigarette smoking exacerbates physical harm. Notably, discussion of additives contained a pervasive tone of mistrust illustrated by words like "they" and "them," by statements of uncertainty such as "you don't know what they're putting into cigarettes," and by negative affective verbalizations such as "nasty" and "disgusting". Participants had distinct beliefs about cigarette additives, each of which seemed to serve a purpose. Although mistrust may complicate communication about the health risks of tobacco use, health communication experts could use smokers' existing beliefs and feelings to better design more effective anti-smoking messages.

  6. Study by vibration spectrometry of addition compounds of boron fluoride with some alkyl oxides, sulphides and selenides

    International Nuclear Information System (INIS)

    Le Calve, Jacques

    1966-01-01

    This research thesis reports the study of the vibration spectrum of some addition compounds of boron fluoride with alkyl oxides, sulphides and selenides. The objective was first the assignment of spectra, and then the study of the influence of the formation of a coordination bound on boron fluoride vibrations and on that of its donor. The author also tried to define correlations between spectrum and structures, and studied the effects of physical status and solvents [fr

  7. Theoretical study of the oxidation mechanisms of naphthalene initiated by hydroxyl radicals: the O2 addition reaction pathways.

    Science.gov (United States)

    Shiroudi, A; Deleuze, M S; Canneaux, S

    2015-05-28

    Atmospheric oxidation of the naphthalene-OH adduct [C10H8OH]˙ (R1) by molecular oxygen in its triplet electronic ground state has been studied using density functional theory along with the B3LYP, ωB97XD, UM05-2x and UM06-2x exchange-correlation functionals. From a thermodynamic viewpoint, the most favourable process is O2 addition at the C2 position in syn mode, followed by O2 addition at the C2 position in anti mode, O2 addition at the C4 position in syn mode, and O2 addition at the C4 position in anti mode, as the second, third and fourth most favourable processes. The syn modes of addition at these positions are thermodynamically favoured over the anti ones by the formation of an intramolecular hydrogen bond between the hydroxyl and peroxy substituents. Analysis of the computed structures, bond orders and free energy profiles demonstrate that the reaction steps involved in the oxidation of the naphthalene-OH adduct by O2 satisfy Hammond's principle. Kinetic rate constants and branching ratios under atmospheric pressure and in the fall-off regime have been supplied, using transition state and RRKM theories. By comparison with experiment, these data confirm the relevance of a two-step reaction mechanism. Whatever the addition mode, O2 addition in C4 position is kinetically favoured over O2 addition in C2 position, in contrast with the expectations drawn from thermodynamics and reaction energies. Under a kinetic control of the reaction, and in line with the computed reaction energy barriers, the most efficient process is O2 addition at the C4 position in syn mode, followed by O2 addition at the C2 position in syn mode, O2 addition at the C4 position in anti mode, and O2 addition at the C2 position in anti mode as the second, third and fourth most rapid processes. The computed branching ratios also indicate that the regioselectivity of the reaction decreases with increasing temperatures and decreasing pressures.

  8. Is there a role of food additives in recurrent aphthous stomatitis? A prospective study with patch testing.

    Science.gov (United States)

    Gülseren, Duygu; Hapa, Asli; Ersoy-Evans, Sibel; Elçin, Gonca; Karaduman, Ayşen

    2017-03-01

    Recurrent aphthous stomatitis (RAS) is a common disease of the oral mucosa with an unknown etiology. This study aimed to determine if food additives play a role in the etiology of RAS as well as to determine if patch testing can be used to detect which allergens cause RAS. This prospective study included 24 patients with RAS and 22 healthy controls. All the participants underwent patch testing for 23 food additives. In total, 21 (87.5%) RAS patients and 3 (13.6%) controls had positive patch test reactions to ≥1 allergens; the difference in the patch test positivity rate between groups was significant (P food additives might play a role in the etiology of RAS and that patch testing could be a method for determining the etiology of RAS. © 2016 The International Society of Dermatology.

  9. STUDY OF THE EFFECT OF CHLORINE ADDITION ON MERCURY OXIDATION BY SCR CATALYST UNDER SIMULATED SUBBITUMINOUS COAL FLUE GAS

    Science.gov (United States)

    An entrained flow reactor is used to study the effect of addition of chlorine-containing species on the oxidation of elemental mercury (Hgo)by a selective catalytic reduction (SCR) catalyst in simulated subbituminous coal combustion flue gas. The combustion flue gas was doped wit...

  10. The influence of bioaugmentation and biosurfactant addition on bioremediation efficiency of diesel-oil contaminated soil: feasibility during field studies.

    Science.gov (United States)

    Szulc, Alicja; Ambrożewicz, Damian; Sydow, Mateusz; Ławniczak, Łukasz; Piotrowska-Cyplik, Agnieszka; Marecik, Roman; Chrzanowski, Łukasz

    2014-01-01

    The study focused on assessing the influence of bioaugmentation and addition of rhamnolipids on diesel oil biodegradation efficiency during field studies. Initial laboratory studies (measurement of emitted CO2 and dehydrogenase activity) were carried out in order to select the consortium for bioaugmentation as well as to evaluate the most appropriate concentration of rhamnolipids. The selected consortium consisted of following bacterial taxa: Aeromonas hydrophila, Alcaligenes xylosoxidans, Gordonia sp., Pseudomonas fluorescens, Pseudomonas putida, Rhodococcus equi, Stenotrophomonas maltophilia, Xanthomonas sp. It was established that the application of rhamnolipids at 150 mg/kg of soil was most appropriate in terms of dehydrogenase activity. Based on the obtained results, four treatment methods were designed and tested during 365 days of field studies: I) natural attenuation; II) addition of rhamnolipids; III) bioaugmentation; IV) bioaugmentation and addition of rhamnolipids. It was observed that bioaugmentation contributed to the highest diesel oil biodegradation efficiency, whereas the addition of rhamnolipids did not notably influence the treatment process. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. THE EFFECT OF PLAYING SNAKE AND LADDER TOWARD THE RESULT STUDY OF ARITHMETIC ADDITION FOR STUDENT WITH MENTALLY RETARDED STUDENT

    Directory of Open Access Journals (Sweden)

    Arianti Iman Sari

    2016-12-01

    Full Text Available The purpose of this research were to describe: (1 the study result of arithmetic addition operation for fourth grade student with mentally retarded in SDLB before playing the Snake and Ladder activity (2 the study result of arithmetic addition operation for fourth grade student with mentally retarded in SDLB after playing the Snake and Ladder activity (3 the effect of Snake and Ladder playing toward the result study of arithmetic addition for fourth grade student with mentally retarded SDLB. This research used SSR (Single Subject Research with A-B-A design. Collecting the data was done by using assessment instrument, tests and observations. The result of this research showed that playing Snake and Ladder affected the study result of arithmetic addition operation for fourth-grade children with mentally retarded student in SDLB. Tujuan penelitian ini adalah mendeskripsikan (1 Hasil belajar penjumlahan siswa kelas 4 SDLB sebelum melakukan kegiatan bermain Ular Tangga (2 Hasil belajar penjumlahan siswa kelas 4 SDLB sesudah melakukan kegiatan bermain Ular Tangga (3 Pengaruh bermain Ular Tangga terhadap hasil belajar penjumlahan siswa kelas 4 SDLB. Penelitian ini menggunakan rancangan penelitian SSR (Single Subject Research dengan desain A-B-A. Pengumpulan data menggunakan instrumen assesmen, tes dan observasi. Hasil penelitian menunjukkan bermain ular tangga berpengaruh terhadap hasil belajar penjumlahan siswa tunagrahita kelas 4 SDLB.

  12. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    International Nuclear Information System (INIS)

    Raguvarun, K.; Balasubramaniam, Krishnan; Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Kapoor, Ajay; Hoye, Nicholas; Curiri, Dominic

    2015-01-01

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength

  13. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    Energy Technology Data Exchange (ETDEWEB)

    Raguvarun, K., E-mail: prajagopal@iitm.ac.in; Balasubramaniam, Krishnan, E-mail: prajagopal@iitm.ac.in; Rajagopal, Prabhu, E-mail: prajagopal@iitm.ac.in [Centre for NDE, Indian Institute of Technology Madras, Chennai 600036, Tamilnadu (India); Palanisamy, Suresh [Swinburne University of Technology, Faculty of Engineering, Science and Technology, Hawthorn, Victoria 3122 Australia and Defence Materials Technology Centre, Hawthorn, Victoria 3122 (Australia); Nagarajah, Romesh; Kapoor, Ajay [Swinburne University of Technology, Faculty of Engineering, Science and Technology, Hawthorn, Victoria 3122 (Australia); Hoye, Nicholas; Curiri, Dominic [University of Wollongong, Faculty of Engineering, New South Wales 2522, Australia and Defence Materials Technology Centre, Hawthorn, Victoria 3122 (Australia)

    2015-03-31

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  14. The addition of tramadol as a second opioid may improve pain relief in severe osteoarthritis: a prospective study.

    Science.gov (United States)

    Di Lorenzo, Luigi; Foti, Calogero; Forte, Alfonso Maria; Palmieri, Enzo; Formisano, Rita; Vatakencherry, Abraham; Pappagallo, Marco

    2010-01-01

    Opioid combination has been shown to reduce the need for escalating doses for the treatment of cancer pain. A prospective study was planned to evaluate the addition of tramadol to a stronger opioid for the treatment of severe pain as a result of osteoarthritis, previously uncontrolled by non-opioid analgesics or weak opioids. All subjects received tramadol 200 mg and tizanidine 2 mg. At 2 weeks, tramadol was discontinued for patients still reporting poor pain relief (effectiveness ≤50%), and a stronger opioid was titrated to a morphine equivalent amount (MEA) of 40-60 mg orally. After two additional weeks, patients were then divided into two groups: the Strong Opioid Group (SO) and the Tramadol plus the Strong Opioid Group (TSO). The SO group was allowed to escalate opioid dose for lack of effectiveness; the TSO group received tramadol 150 mg daily, thereafter additional strong opioid titration was allowed. A total of 74 patients were studied: SO (n = 40) and TSOG (n = 34). All patients eventually achieved pain relief quality, with both groups reporting similar Karnofsky Performance Scale effectiveness. The SO group achieved satisfactory pain relief (>50%) at an average daily oral MEA of 120 mg. TSO subjects achieved satisfactory pain relief (>50%) at an average daily oral MEA of 95 mg. The addition of tramadol provided a synergistic effect resulting in a 30-mg decrease in necessary morphine equivalents with fewer opioid-related adverse effects. © 2010 The Authors. Pain Practice © 2010 World Institute of Pain.

  15. [Assessment of the effect of selected mixture of food additives on the protein metabolism--model studies].

    Science.gov (United States)

    Friedrich, Mariola; Kuchlewska, Magdalena

    2012-01-01

    Contemporarily, food production without food additives is very rare. Increasingly often, however, scientific works report on adverse effects of specified, single food additives on the body. Data is, in turn, lacking on the synergistic effect of a mixture of different food additives on body functions and its main metabolic pathways. The objective of this study, an animal model, was to evaluate if and in what way the compound of chosen and most frequently used and consumed food additives, along with the change of diet composition to processed, purified, influence the selected markers of protein metabolism. The animals were divided into four groups, which were fed with compound of feed pellets: group I and II with basic compound, group III and IV with modified compound in which part of the full grain was replaced by isocalorie wheat flour type 500 and saccharose. Animals from groups I and III received tap water, which was standing for some time, to drink. Animals from groups II and IV received solution of chosen additives to food and next they were given water to drink. The amount of given food additives was evaluated by taking into consideration their consumption by people recalculated to 1 kg of their body mass. The experiment spanned for 7 weeks. It was ascertained that the applied additives caused significant changes in total protein concentration and its fractions: albumin, alpha1-globulin, alpha2-globulin, beta-globulin and gamma-globulin in the blood serum of the animals under research, which can indicate and contribute to disclosure of creation of undesirable food reaction, especially when recommended levels of consumption of those additives are being exceeded. The organism response to the applied additives and accompanying it change of diet was essentially connected to sex of the animals. Undesirable character of changes taking place under the influence of applied additives, was observed both in animals fed with basic feed and modified feed with various

  16. Theoretical study on the reaction mechanisms of Michael chirality addition between propionaldehyde and nitroalkene catalyzed by an enantioselective catalyst.

    Science.gov (United States)

    Zhou, Xinming; Li, Ling; Sun, Xuejun; Wang, Yajun; Du, Dongmei; Fu, Hui

    2018-06-01

    The asymmetric Michael addition between propionaldehyde and nitroalkene catalyzed by 8-(ethoxycarbonyl)-1,2,3,3a,8,8a-hexahydropyrrolo[2,3-b]indole-2-carboxylic acid has obtained relatively high yields and excellent enantioselectivities at room temperature. In this study, the molecular structures and optical activity of the most stable conformation I are optimized at B3LYP/6-311++ G(d,p) level. We find that levorotatory conformation I catalyzing the same Michael addition can produce laevo-product A and dextrorotatory conformation I' can obtain the dextral-product A'. These results have guiding significance for further studying on the new chemzymes and the mechanism of the obtained different chiral products. © 2018 Wiley Periodicals, Inc.

  17. Density functional theoretical study on the C-F and C-O oxidative addition reaction at an AI center

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Seong [Dept. of Science Education, Kyungnam University, Masan (Korea, Republic of); Cho, Hyun; Hwang, Sungu [Dept. of Nanomechatronics Engineering, Pusan National University, Miryang (Korea, Republic of)

    2017-02-15

    In this study, B3LYP/LACVP** level calculations were chosen because the level of theory was applied successfully to calculations of the thermodynamic and kinetic features of the oxidative addition reactions of alkyl and aryl halides to pincer-type complexes. This study examined the effects of the substituents on the phenyl rings of the Al(I) center. Isopropyl side chains in the phenyl rings attached to N atoms of the pincer ligand were replaced with a methyl (Me) (2) or tertiary butyl ( t Bu) group. The oxidative addition of C[BOND]F and C[BOND]O bonds to an Al (I) center was investigated computationally by DFT calculations. The geometries, thermodynamic, and kinetic features were in good agreement with the experimental data, as in previous studies on the transition metal complexes. The computational results showed that the DFT calculations could provide qualitative insight into the reactivity and thermodynamics of the oxidative addition reactions of C[BOND]F bonds.

  18. Combined X-ray and Raman Studies on the Effect of Cobalt Additives on the Decomposition of Magnesium Borohydride

    Directory of Open Access Journals (Sweden)

    Olena Zavorotynska

    2015-08-01

    Full Text Available Magnesium borohydride (Mg(BH42 is one of the most promising hydrogen storage materials. Its kinetics of hydrogen desorption, reversibility, and complex reaction pathways during decomposition and rehydrogenation, however, present a challenge, which has been often addressed by using transition metal compounds as additives. In this work the decomposition of Mg(BH42 ball-milled with CoCl2 and CoF2 additives, was studied by means of a combination of several in-situ techniques. Synchrotron X-ray diffraction and Raman spectroscopy were used to follow the phase transitions and decomposition of Mg(BH42. By comparison with pure milled Mg(BH42, the temperature for the γ → ε phase transition in the samples with CoF2 or CoCl2 additives was reduced by 10–45 °C. In-situ Raman measurements showed the formation of a decomposition phase with vibrations at 2513, 2411 and 766 cm−1 in the sample with CoF2. Simultaneous X-ray absorption measurements at the Co K-edge revealed that the additives chemically transformed to other species. CoF2 slowly reacted upon heating till ~290 °C, whereas CoCl2 transformed drastically at ~180 °C.

  19. In situ morphology studies of the mechanism for solution additive effects on the formation of bulk heterojunction films

    KAUST Repository

    Richter, Lee J.

    2014-09-29

    The most successful active film morphology in organic photovoltaics is the bulk heterojunction (BHJ). The performance of a BHJ arises from a complex interplay of the spatial organization of the segregated donor and acceptor phases and the local order/quality of the respective phases. These critical morphological features develop dynamically during film formation, and it has become common practice to control them by the introduction of processing additives. Here, in situ grazing incidence X-ray diffraction (GIXD) and grazing incidence small angle X-ray scattering (GISAXS) studies of the development of order in BHJ films formed from the donor polymer poly(3-hexylthiophene) and acceptor phenyl-C61-butyric acid methyl ester under the influence of two common additives, 1,8-octanedithiol and 1-chloronaphthalene, are reported. By comparing optical aggregation to crystallization and using GISAXS to determine the number and nature of phases present during drying, two common mechanisms by which the additives increase P3HT crystallinity are identified. Additives accelerate the appearance of pre-crystalline nuclei by controlling solvent quality and allow for extended crystal growth by delaying the onset of PCBM-induced vitrification. The glass transition effects vary system-to-system and may be correlated to the number and composition of phases present during drying. Synchrotron X-ray scattering measurements of nanoscale structure evolution during the drying of polymer-fullerene photovoltaic films are described. Changes in the number and nature of phases, as well as the order within them, reveals the mechanisms by which formulation additives promote structural characteristics leading to higher power conversion efficiencies.

  20. In situ morphology studies of the mechanism for solution additive effects on the formation of bulk heterojunction films

    KAUST Repository

    Richter, Lee J.; DeLongchamp., Dean M.; Bokel, Felicia A.; Engmann, Sebastian; Chou, Kang Wei; Amassian, Aram; Schaible, Eric G.; Hexemer, Alexander

    2014-01-01

    The most successful active film morphology in organic photovoltaics is the bulk heterojunction (BHJ). The performance of a BHJ arises from a complex interplay of the spatial organization of the segregated donor and acceptor phases and the local order/quality of the respective phases. These critical morphological features develop dynamically during film formation, and it has become common practice to control them by the introduction of processing additives. Here, in situ grazing incidence X-ray diffraction (GIXD) and grazing incidence small angle X-ray scattering (GISAXS) studies of the development of order in BHJ films formed from the donor polymer poly(3-hexylthiophene) and acceptor phenyl-C61-butyric acid methyl ester under the influence of two common additives, 1,8-octanedithiol and 1-chloronaphthalene, are reported. By comparing optical aggregation to crystallization and using GISAXS to determine the number and nature of phases present during drying, two common mechanisms by which the additives increase P3HT crystallinity are identified. Additives accelerate the appearance of pre-crystalline nuclei by controlling solvent quality and allow for extended crystal growth by delaying the onset of PCBM-induced vitrification. The glass transition effects vary system-to-system and may be correlated to the number and composition of phases present during drying. Synchrotron X-ray scattering measurements of nanoscale structure evolution during the drying of polymer-fullerene photovoltaic films are described. Changes in the number and nature of phases, as well as the order within them, reveals the mechanisms by which formulation additives promote structural characteristics leading to higher power conversion efficiencies.

  1. Applicability of the DPPH assay for evaluating the antioxidant capacity of food additives - inter-laboratory evaluation study -.

    Science.gov (United States)

    Shimamura, Tomoko; Sumikura, Yoshihiro; Yamazaki, Takeshi; Tada, Atsuko; Kashiwagi, Takehiro; Ishikawa, Hiroya; Matsui, Toshiro; Sugimoto, Naoki; Akiyama, Hiroshi; Ukeda, Hiroyuki

    2014-01-01

    An inter-laboratory evaluation study was conducted in order to evaluate the antioxidant capacity of food additives by using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. Four antioxidants used as existing food additives (i.e., tea extract, grape seed extract, enju extract, and d-α-tocopherol) and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) were used as analytical samples, and 14 laboratories participated in this study. The repeatability relative standard deviation (RSD(r)) of the IC50 of Trolox, four antioxidants, and the Trolox equivalent antioxidant capacity (TEAC) were 1.8-2.2%, 2.2-2.9%, and 2.1-2.5%, respectively. Thus, the proposed DPPH assay showed good performance within the same laboratory. The reproducibility relative standard deviation (RSD(R)) of IC50 of Trolox, four antioxidants, and TEAC were 4.0-7.9%, 6.0-11%, and 3.7-9.3%, respectively. The RSD(R)/RSD(r) values of TEAC were lower than, or nearly equal to, those of IC50 of the four antioxidants, suggesting that the use of TEAC was effective for reducing the variance among the laboratories. These results showed that the proposed DPPH assay could be used as a standard method to evaluate the antioxidant capacity of food additives.

  2. A numerical study of the influence of ammonia addition on the auto-ignition limits of methane/air mixtures

    International Nuclear Information System (INIS)

    Van den Schoor, F.; Norman, F.; Vandebroek, L.; Verplaetsen, F.; Berghmans, J.

    2009-01-01

    In this study the auto-ignition limit of ammonia/methane/air mixtures is calculated based upon a perfectly stirred reactor model with convective heat transfer. The results of four different reaction mechanisms are compared with existing experimental data at an initial temperature of 723 K with ammonia concentrations of 0-20 mol.% and methane concentrations of 2.5-10 mol.%. It is found that the calculation of the auto-ignition limit pressure at constant temperature leads to larger relative deviations between calculated and experimental results than the calculation of the auto-ignition temperature at constant pressure. In addition to the calculations, a reaction path analysis is performed to explain the observed lowering of the auto-ignition limit of methane/air mixtures by ammonia addition. It is found that this decrease is caused by the formation of NO and NO 2 , which enhance the oxidation of methane at low temperatures.

  3. Addition of host genetic variants in a prediction rule for post meningitis hearing loss in childhood: a model updating study.

    Science.gov (United States)

    Sanders, Marieke S; de Jonge, Rogier C J; Terwee, Caroline B; Heymans, Martijn W; Koomen, Irene; Ouburg, Sander; Spanjaard, Lodewijk; Morré, Servaas A; van Furth, A Marceline

    2013-07-23

    Sensorineural hearing loss is the most common sequela in survivors of bacterial meningitis (BM). In the past we developed a validated prediction model to identify children at risk for post-meningitis hearing loss. It is known that host genetic variations, besides clinical factors, contribute to severity and outcome of BM. In this study it was determined whether host genetic risk factors improve the predictive abilities of an existing model regarding hearing loss after childhood BM. Four hundred and seventy-one Dutch Caucasian childhood BM were genotyped for 11 single nucleotide polymorphisms (SNPs) in seven different genes involved in pathogen recognition. Genetic data were added to the original clinical prediction model and performance of new models was compared to the original model by likelihood ratio tests and the area under the curve (AUC) of the receiver operating characteristic curves. Addition of TLR9-1237 SNPs and the combination of TLR2 + 2477 and TLR4 + 896 SNPs improved the clinical prediction model, but not significantly (increase of AUC's from 0.856 to 0.861 and from 0.856 to 0.875 (p = 0.570 and 0.335, respectively). Other SNPs analysed were not linked to hearing loss. Although addition of genetic risk factors did not significantly improve the clinical prediction model for post-meningitis hearing loss, AUC's of the pre-existing model remain high after addition of genetic factors. Future studies should evaluate whether more combinations of SNPs in larger cohorts has an additional value to the existing prediction model for post meningitis hearing loss.

  4. Addition of immunosuppressive treatment to hemoperfusion is associated with improved survival after paraquat poisoning: a nationwide study.

    Science.gov (United States)

    Wu, Wen-Pyng; Lai, Ming-Nan; Lin, Ching-Heng; Li, Yu-Fen; Lin, Ching-Yuang; Wu, Ming-Ju

    2014-01-01

    Paraquat poisoning associates very high mortality rate. Early treatment with hemoperfusion is strongly suggested by animal and human studies. Although the survival benefit of additional immunosuppressive treatment (IST) in combination with hemoperfusion is also reported since 1971, the large-scale randomized control trials to confirm the effects of IST is difficult to be executed. Therefore, we designed this nationwide large-scale population-based retrospective cohort study to investigate the outcome of paraquat poisoning with hemoperfusion and the additional effects of IST combined with hemoperfusion. This nationwide retrospective cohort study utilized data retrieved from the National Health Insurance Research Database (NHIRD) of Taiwan. A total of 1811 hospitalized patients with a diagnosis of paraquat poisoning who received hemoperfusion between 1997 and 2009 were enrolled. The mean age of all 1811 study subjects was 47.3 years. 70% was male. The overall survival rate was only 26.4%. Respiratory failure and renal failure were diagnosed in 56.2% and 36% patients. The average frequency of hemoperfusion was twice. IST was added in 42.2% patients. IST significantly increases survival rate (from 24.3% to 29.3%, Ppoisoned patients. The best survival effect of IST is the combination of methylprednisolone, cyclophosphamide and daily dexamethasone, especially in patients with younger age.

  5. 'Thinking ill of others without sufficient warrant?' Transcending the accuracy-inaccuracy dualism in prejudice and stereotyping research.

    Science.gov (United States)

    Dixon, John

    2017-03-01

    Research on prejudice seeks to understand and transform inaccurate beliefs about others. Indeed, historically such research has offered a cautionary tale of the biased nature of human cognition. Recently, however, this view has been challenged by work defending the essential rationality of intergroup perception, a theme captured controversially in Jussim and colleagues' (2009) research on the 'unbearable accuracy of stereotyping'. The present paper argues that in its own terms the 'rationalist turn' in socio-cognitive research on stereotyping presents an important challenge to the prejudice tradition, raising troubling questions about its conceptual and empirical foundations. However, it also argues for the necessity of transcending those terms. By focusing on the correspondence between individual beliefs and the supposedly 'objective' characteristics of others, we neglect the historical and discursive practices through which the social realities that we 'perceive' are actively constructed and institutionalized. We mask their social origins, contested and perspectival nature, relativity, and relationship to wider structures of power. By implication, moving beyond the Allportian perspective that has dominated both the prejudice tradition and the emerging stereotype accuracy paradigm, we may now need to prioritize other kinds of questions. Reversing Allport's famous definition of prejudice, it may now be time to ask: How, and with what consequences, does 'thinking ill of others' become sufficiently warranted? How does such thinking become part of institutionalized relations of power and an accepted way of perceiving, evaluating and treating others? What should social psychologists be doing to challenge this state of affairs? © 2017 The British Psychological Society.

  6. High-fertility phenotypes: two outbred mouse models exhibit substantially different molecular and physiological strategies warranting improved fertility.

    Science.gov (United States)

    Langhammer, Martina; Michaelis, Marten; Hoeflich, Andreas; Sobczak, Alexander; Schoen, Jennifer; Weitzel, Joachim M

    2014-01-01

    Animal models are valuable tools in fertility research. Worldwide, there are more than 400 transgenic or knockout mouse models available showing a reproductive phenotype; almost all of them exhibit an infertile or at least subfertile phenotype. By contrast, animal models revealing an improved fertility phenotype are barely described. This article summarizes data on two outbred mouse models exhibiting a 'high-fertility' phenotype. These mouse lines were generated via selection over a time period of more than 40 years and 161 generations. During this selection period, the number of offspring per litter and the total birth weight of the entire litter nearly doubled. Concomitantly with the increased fertility phenotype, several endocrine parameters (e.g. serum testosterone concentrations in male animals), physiological parameters (e.g. body weight, accelerated puberty, and life expectancy), and behavioral parameters (e.g. behavior in an open field and endurance fitness on a treadmill) were altered. We demonstrate that the two independently bred high-fertility mouse lines warranted their improved fertility phenotype using different molecular and physiological strategies. The fertility lines display female- as well as male-specific characteristics. These genetically heterogeneous mouse models provide new insights into molecular and cellular mechanisms that enhance fertility. In view of decreasing fertility in men, these models will therefore be a precious information source for human reproductive medicine. Translated abstract A German translation of abstract is freely available at http://www.reproduction-online.org/content/147/4/427/suppl/DC1.

  7. A study on fibre addition to gluten free bread: its effects on bread quality and in vitro digestibility.

    Science.gov (United States)

    Sciarini, L S; Bustos, M C; Vignola, M B; Paesani, C; Salinas, C N; Pérez, G T

    2017-01-01

    The aim of this study was to assess the impact of fibre addition on gluten-free (GF) dough properties and bread technological quality, and on protein and starch in vitro digestibility. Soluble (Inulin, In) and insoluble fibres (oat fibre, OF, and type IV resistant starch, RSIV) were used at 5 and 10% substitution levels. Dough firmness increased when insoluble fibres were added, and decreased when In was used. Incorporation of insoluble fibres resulted into bread with a low specific volume (SBV) since firmer dough were more difficult to expand during proofing and baking. Staling rate was reduced after fibre addition, with the exception being OF 10%, as its lower SBV may have favoured molecule re-association. In general, protein and starch digestibility increased when fibres were added at 5%, and then decreased after further increasing the level. Fibres may have disrupted bread crumb structure, thus increasing digestibility, although the higher addition may have led to a physical and/or chemical impediment to digestion. Inulin has well-known physiological effects, while RS presented the most important effect on in vitro starch digestibility (GI). These results showed the possibility of adding different fibres to GF bread to decrease the GI and increase protein digestibility, while obtaining an overall high quality end-product.

  8. Studies on rheological and leaching characteristics of heavy metals through selective additive in high concentration ash slurry.

    Science.gov (United States)

    Senapati, P K; Mohapatra, R; Pani, G K; Mishra, B K

    2012-08-30

    The generation and disposal level of thermal power plant ash in India is a challenging task. The conventional mode of dilute phase ash slurry (10-20% solids by weight) transport through pipelines being practiced in majority of these plants not only consumes huge amount of precious water and pumping energy but also causes serious environmental problem at the disposal site. The present study investigates the rheological and leaching characteristics of an Indian ash samples at high solids concentrations (>50% by weight) using sodium silicate as an additive. The flow behaviour of ash slurry in the concentration range of 50-60% by weight is described by a Bingham-plastic model. It was indicated that the addition of sodium silicate (0.2-0.6% of the total solids) could able to reduce both the slurry viscosity and the yield stress. The analysis of the ash samples for the presence of heavy metals such as Fe, Cd, Ni, Pb, Zn, Cu, Co, As and Hg were carried out following Hansen and Fisher procedure. The addition of sodium silicate affected the leaching characteristics of the ash samples over a period of 300 days resulting in the reduction of leaching of heavy metals. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Trapped particle confinement studies in L = 2 torsatrons for additional helical coils, radial electric field and finite beta effect

    International Nuclear Information System (INIS)

    Kato, A.; Nakamura, Y.; Wakatani, M.

    1990-07-01

    L = 2 torsatrons are studied to improve the high energy trapped particle confinement with additional l = 1 and/or l = 3 helical coils. The winding laws are selected in two ways. One is to realize 'σ - optimization' by the additional helical coils, but this approach loses magnetic well region. The other selection is to produce or deepen the magnetic well by the additional helical coils. L=3 helical coils are usable to this end. In this case the improvement of the trapped particle confinement depends on magnetic axis position. Radial electric field producing sheared rotational motion is also considered to improve the trapped particle confinement in a standard l = 2 torsatron. By excluding cancellation between E x B and ΔB drift motion occurred for the parabolic potential profiles, all deeply trapped particles can be confined in the central region. Degradation of the trapped particle confinement by the Shafranov shift is mitigated by shifting the magnetic axis inside in the vacuum configuration. (author)

  10. Theoretical study of the oxidation mechanisms of naphthalene initiated by hydroxyl radicals: the OH-addition pathway.

    Science.gov (United States)

    Shiroudi, Abolfazl; Deleuze, Michael S; Canneaux, Sébastien

    2014-07-03

    The oxidation mechanisms of naphthalene by OH radicals under inert (He) conditions have been studied using density functional theory along with various exchange-correlation functionals. Comparison has been made with benchmark CBS-QB3 theoretical results. Kinetic rate constants were correspondingly estimated by means of transition state theory and statistical Rice-Ramsperger-Kassel-Marcus (RRKM) theory. Comparison with experiment confirms that, on the OH-addition reaction pathway leading to 1-naphthol, the first bimolecular reaction step has an effective negative activation energy around -1.5 kcal mol(-1), whereas this step is characterized by an activation energy around 1 kcal mol(-1) on the OH-addition reaction pathway leading to 2-naphthol. Effective rate constants have been calculated according to a steady state analysis upon a two-step model reaction mechanism. In line with experiment, the correspondingly obtained branching ratios indicate that, at temperatures lower than 410 K, the most abundant product resulting from the oxidation of naphthalene by OH radicals must be 1-naphthol. The regioselectivity of the OH(•)-addition onto naphthalene decreases with increasing temperatures and decreasing pressures. Because of slightly positive or even negative activation energies, the RRKM calculations demonstrate that the transition state approximation breaks down at ambient pressure (1 bar) for the first bimolecular reaction steps. Overwhelmingly high pressures, larger than 10(5) bar, would be required for restoring to some extent (within ∼5% accuracy) the validity of this approximation for all the reaction channels that are involved in the OH-addition pathway. Analysis of the computed structures, bond orders, and free energy profiles demonstrate that all reaction steps involved in the oxidation of naphthalene by OH radicals satisfy Leffler-Hammond's principle. Nucleus independent chemical shift indices and natural bond orbital analysis also show that the computed

  11. Additive survival least square support vector machines: A simulation study and its application to cervical cancer prediction

    Science.gov (United States)

    Khotimah, Chusnul; Purnami, Santi Wulan; Prastyo, Dedy Dwi; Chosuvivatwong, Virasakdi; Sriplung, Hutcha

    2017-11-01

    Support Vector Machines (SVMs) has been widely applied for prediction in many fields. Recently, SVM is also developed for survival analysis. In this study, Additive Survival Least Square SVM (A-SURLSSVM) approach is used to analyze cervical cancer dataset and its performance is compared with the Cox model as a benchmark. The comparison is evaluated based on the prognostic index produced: concordance index (c-index), log rank, and hazard ratio. The higher prognostic index represents the better performance of the corresponding methods. This work also applied feature selection to choose important features using backward elimination technique based on the c-index criterion. The cervical cancer dataset consists of 172 patients. The empirical results show that nine out of the twelve features: age at marriage, age of first getting menstruation, age, parity, type of treatment, history of family planning, stadium, long-time of menstruation, and anemia status are selected as relevant features that affect the survival time of cervical cancer patients. In addition, the performance of the proposed method is evaluated through a simulation study with the different number of features and censoring percentages. Two out of three performance measures (c-index and hazard ratio) obtained from A-SURLSSVM consistently yield better results than the ones obtained from Cox model when it is applied on both simulated and cervical cancer data. Moreover, the simulation study showed that A-SURLSSVM performs better when the percentage of censoring data is small.

  12. The study of chlorination of nickel oxide by chlorine and calcium chloride in the presence of active additives

    OpenAIRE

    Ilic, Ilija; Krstev, Boris; Stopic, Srecko; Cerovic, K

    1997-01-01

    Chlorination of nickel oxide by chlorine and calcium chloride in the presence of C, BaS and S were studied, both experimentally and theoretically. Chlorination of nickel oxide by chlorine was carried out in the temperature range 573-873 K and by calcium chloride in the temperature range 1023-1223 K. The results obtained of the chlorination of nickel oxide by chlorine showed that C has the strongest and S the weakest effect on the process. Addition of BaS has a favorable effect on the chlorina...

  13. Comparative study of the influence of antimony oxide additives (III) and nickel hydroxide (II) on electrochemical behavior of cadmium electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Kadnikova, N.V.; Lvova, L.A.; Ryabskaya, I.A.

    1983-01-01

    Comparative study of the influence of additives indicated that with partial or complete replacement in the active mass of the cadmium electrode of nickel hydroxide (II) by antimony oxide (III), the electrochemical characteristics do not significantly change. During prolonged storage of charged cadmium electrodes the presence of nickel hydroxide (II) and intermetal compound (IMC) of cadmium with nickel is formed and the specific surface increases. In the case of adding antimony (III) formation of noticeable quantities of IMC of cadmium with antimony is not observed. The specific surface is reduced during storage.

  14. Can additional urban development have major impacts on streamflow of a peri-urban catchment? A case study from Portugal

    Science.gov (United States)

    Ferreira, Carla; Walsh, Rory; Nunes, João; Steenhuis, Tammo; de Lima, João; Coelho, Celeste; Ferreira, António

    2016-04-01

    It is well known that urban development brings about changes in hydrological response. Relatively little, however, is known about impacts on streamflow during urban development in the Mediterranean climate. This paper examines changes in streamflow resulting from the construction of an enterprise park, a major road and apartment blocks in a small partially urbanized peri-urban catchment (6.2 km2) in central Portugal. These developments led to an increase in urban area from 32% to 40% over a five-year period (hydrological years 2008/09-2012/13). In the initial two-year period minor land-use changes increased impervious surfaces from 12.8% to 13.2%. The subsequent three-year period led to a further 17.2% increase in impervious area. Streamflow was recorded by a V-notch weir at the catchment outlet. Rainfall was recorded at a weather station 0.5km north of the catchment, and by five tipping-bucket raingauges installed in January 2011 within the study catchment. Annual runoff and storm runoff coefficients ranged from 14% to 21% and 9% to 14%, respectively, recorded in 2011/12 and 2012/13. Although these differences in runoff were caused in part by variation in rainfall, the comparison between 2009/10 (pre-) and 2012/13 (post-additional urban development), with broadly similar rainfall (887mm vs 947mm, respectively) and evapotranspiration (740mm vs 746mm), showed a 43% increase in storm runoff (from 90mm to 129mm), resulting from additional overland flow generated largely by the 4.4% increase in impervious surfaces. The additional urban development also led to changes in hydrograph parameters. The increase in storm runoff was not progressive over the study period, but regression lines of storm runoff against rainstorm parameters exhibited higher vertical positions in 2012/13 than 2008/09. Increasing peak flows, however, were more progressive over the study period, with annual regression lines displaying higher vertical positions, but with a clear distance between pre

  15. Transcutaneous electrical nerve stimulation as an additional treatment for women suffering from therapy-resistant provoked vestibulodynia: a feasibility study.

    Science.gov (United States)

    Vallinga, Marleen S; Spoelstra, Symen K; Hemel, Inge L M; van de Wiel, Harry B M; Weijmar Schultz, Willibrord C M

    2015-01-01

    The current approach to women with provoked vestibulodynia (PVD) comprises a multidimensional, multidisciplinary therapeutic protocol. As PVD is considered to be a chronic pain disorder, transcutaneous electrical nerve stimulation (TENS) can be used as an additional therapy for women with otherwise therapy-resistant PVD. The aims of this study were to evaluate whether TENS has a beneficial effect on vulvar pain, sexual functioning, and sexually-related personal distress in women with therapy-resistant PVD and to assess the effect of TENS on the need for vestibulectomy. A longitudinal prospective follow-up study was performed on women with therapy-resistant PVD who received additional domiciliary TENS. Self-report questionnaires and visual analog scales (VASs) were completed at baseline (T1), post-TENS (T2), and follow-up (T3). Vulvar pain, sexual functioning, and sexually-related personal distress were the main outcome measures. Thirty-nine women with therapy-resistant PVD were included. Mean age was 27 ± 5.6 years (range: 19 to 41); mean duration between TENS and T3 follow-up was 10.1 ± 10.7 months (range: 2 to 32). Vulvar pain VAS scores directly post-TENS (median 3.4) and at follow-up (median 3.2) were significantly (P pain and the need for vestibulectomy. The long-term effect was stable. These results not only support our hypothesis that TENS constitutes a feasible and beneficial addition to multidimensional treatment for therapy-resistant PVD, but also the notion that PVD can be considered as a chronic pain syndrome. © 2014 International Society for Sexual Medicine.

  16. Evaluation of Consumer Satisfaction for the Quality of Bread Modified with Additives: A Case Study of Alborz Province

    Directory of Open Access Journals (Sweden)

    Somaye Nobari

    2016-03-01

    Full Text Available Background: Bread is the staple food of Iranian society. Attention to its health and hygiene is important. Nowadays, the use of baking soda in the production of bread has seen by most of bakers which is because of producing bread with more beautiful and appearance and is more public acceptance. Methods: In this cross-sectional study that 40 people were taken, consumer satisfaction of prepared Barbari bread using three types additives Fenugreek juice, baking soda, and tomato juice by means of questionnaires were evaluated. Results: The results of this study showed that consumer satisfaction of taste and smell (34 of 40, appearance, glazing, and quality (36 of 40 of prepared bread by tomato juice was more than Fenugreek juice and baking soda. Consumer satisfaction of taste, smell, appearance, glazing, quality, shopping satisfaction, and quality of bread over time of three types of additives (baking soda, tomato juice, and Fenugreek juice was significant (p<0.05. Conclusion: Tomato juice has the attributes necessary for public acceptance and satisfaction of consumers, nevertheless don’t have the complications of baking soda. So it can be a reasonable alternative for the processing of bread dough instead of baking soda.

  17. Study on the reutilization of clear fracturing flowback fluids in surfactant flooding with additives for Enhanced Oil Recovery (EOR.

    Directory of Open Access Journals (Sweden)

    Caili Dai

    Full Text Available An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS for enhanced oil recovery (EOR. The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT between recycling system and oil can be reduced by 2 orders of magnitude to 10(-3 mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical.

  18. Study on the reutilization of clear fracturing flowback fluids in surfactant flooding with additives for Enhanced Oil Recovery (EOR).

    Science.gov (United States)

    Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

    2014-01-01

    An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10(-3) mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical.

  19. Intensive exercise reduces the fear of additional falls in elderly people: findings from the Korea falls prevention study.

    Science.gov (United States)

    Oh, Dong Hyun; Park, Ji Eun; Lee, Eon Sook; Oh, Sang Woo; Cho, Sung Il; Jang, Soong Nang; Baik, Hyun Wook

    2012-12-01

    Falls among older people are a major public health problem and may result in fracture, medical complications that require hospitalization, and fear of additional falls. Given the prevalence and impact of the fear of falling again, reducing the incidence of falls is important to prevent additional falls. This study analyzed whether exercise programs decrease the fear of future falls in elderly patients who have fallen previously. A randomized controlled study was performed that included 65 elderly community-dwelling subjects who had fallen in the previous year. Subjects were randomized into two groups: an exercise group (EG, n = 36) and a control group (CG, n = 29). The EG participated in three exercise sessions per week for 12 weeks. Muscle strength, balance, agility, flexibility, and muscular endurance were measured at baseline and after 12 weeks. After the 12-week exercise program, the subjects in the EG demonstrated remarkable improvement in their walking speed, balance (p = 0.003), back strength (p = 0.08), lower extremity strength (p = 0.004), and flexibility (p falling, more participants in the EG than in the CG responded "not at all" or "a little." The 12-week exercise program described here reduced the fear of falling (p = 0.02). It also improved the balance, flexibility, and muscle strength of the participants and was associated with improved quality of life.

  20. Robust Tests for Additive Gene-Environment Interaction in Case-Control Studies Using Gene-Environment Independence

    DEFF Research Database (Denmark)

    Liu, Gang; Lee, Seunggeun; Lee, Alice W

    2018-01-01

    test with case-control data. Our simulation studies suggest that the EB approach uses the gene-environment independence assumption in a data-adaptive way and provides power gain compared to the standard logistic regression analysis and better control of Type I error when compared to the analysis......There have been recent proposals advocating the use of additive gene-environment interaction instead of the widely used multiplicative scale, as a more relevant public health measure. Using gene-environment independence enhances the power for testing multiplicative interaction in case......-control studies. However, under departure from this assumption, substantial bias in the estimates and inflated Type I error in the corresponding tests can occur. This paper extends the empirical Bayes (EB) approach previously developed for multiplicative interaction that trades off between bias and efficiency...

  1. The prevalence of diabetic retinopathy in patients with screen-detected type 2 diabetes in Denmark: the ADDITION study

    DEFF Research Database (Denmark)

    Bek, Toke; Lund-Andersen, Henrik; Hansen, Anja Bech

    2009-01-01

    . There was no significant difference between age, sex and visual acuity among patients with and without retinopathy. However, the patients with retinopathy had significantly higher HbA1c and systolic and diastolic blood pressure than the patients without retinopathy. CONCLUSION: Patients with screen-detected diabetes have......BACKGROUND: The prevalence of type 2 diabetes is increasing, but the exact prevalence of the disease and its accompanying late complications are unknown. In the Anglo-Danish-Dutch study of Intensive Treatment in People with Screen-detected Diabetes in Primary Care (ADDITION study), patients...... with hitherto undiagnosed type 2 diabetes are identified using a stepwise screening strategy in selected general practices. This article reports the occurrence of diabetic retinopathy in this population. METHODS: In Arhus and Copenhagen counties, a total of 12,708 of the persons invited by mail were screened...

  2. Study through potentiodynamic techniques of the corrosion resistance of different aluminium base MMC's with boron additions

    International Nuclear Information System (INIS)

    Abenojar, J.; Bautista, A.; Guzman, S.; Velasco, F.; Martinez, M.A.

    2009-01-01

    This paper compares a wrought aluminium with a PM aluminium and PM aluminium alloys with boron-base additions, containing boron carbide and Fe/B (obtained by mechanical alloying during 36 hours from a Fe-B 50% mixture by weight). The effect of sintering temperature for the Fe/B containing material and the effect of mechanical alloying for the boron carbide containing aluminium alloy on the corrosion resistance of those materials have been studied. Their behaviour is followed through cyclic anodic polarization curves in chloride media. In the Al+20%Fe/B composite, low sintering temperatures (650- 950 deg C) exert a negative effect. However, when the material was sintered at high temperature (1000-1100 deg C) its behaviour was very similar to the PM pure aluminium. The effect of mechanical alloying studied in aluminium with boron carbide was also important in corrosion resistance, finding a lower corrosion rate in the mechanically alloyed material. (author)

  3. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

    Science.gov (United States)

    Ding, Yaoyu; Kovacevic, Radovan

    2016-07-01

    Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

  4. Addition of immunosuppressive treatment to hemoperfusion is associated with improved survival after paraquat poisoning: a nationwide study.

    Directory of Open Access Journals (Sweden)

    Wen-Pyng Wu

    Full Text Available Paraquat poisoning associates very high mortality rate. Early treatment with hemoperfusion is strongly suggested by animal and human studies. Although the survival benefit of additional immunosuppressive treatment (IST in combination with hemoperfusion is also reported since 1971, the large-scale randomized control trials to confirm the effects of IST is difficult to be executed. Therefore, we designed this nationwide large-scale population-based retrospective cohort study to investigate the outcome of paraquat poisoning with hemoperfusion and the additional effects of IST combined with hemoperfusion. This nationwide retrospective cohort study utilized data retrieved from the National Health Insurance Research Database (NHIRD of Taiwan. A total of 1811 hospitalized patients with a diagnosis of paraquat poisoning who received hemoperfusion between 1997 and 2009 were enrolled. The mean age of all 1811 study subjects was 47.3 years. 70% was male. The overall survival rate was only 26.4%. Respiratory failure and renal failure were diagnosed in 56.2% and 36% patients. The average frequency of hemoperfusion was twice. IST was added in 42.2% patients. IST significantly increases survival rate (from 24.3% to 29.3%, P<0.001. The combined IST with methylprednisolone, cyclophosphamide and dexamethasone associates with the highest survival rate (48%, P<0.001. Moreover, patients younger than 45 years of age in the IST group had the best survival (41.0% vs. 33.7%, p<0.001. Our results support the use of IST with hemoperfusion for paraquat-poisoned patients. The best survival effect of IST is the combination of methylprednisolone, cyclophosphamide and daily dexamethasone, especially in patients with younger age.

  5. Risk of breast cancer after a diagnosis of ovarian cancer in BRCA mutation carriers: Is preventive mastectomy warranted?

    Science.gov (United States)

    McGee, Jacob; Giannakeas, Vasily; Karlan, Beth; Lubinski, Jan; Gronwald, Jacek; Rosen, Barry; McLaughlin, John; Risch, Harvey; Sun, Ping; Foulkes, William D; Neuhausen, Susan L; Kotsopoulos, Joanne; Narod, Steven A

    2017-05-01

    Preventive breast surgery and MRI screening are offered to unaffected BRCA mutation carriers. The clinical benefit of these two modalities has not been evaluated among mutation carriers with a history of ovarian cancer. Thus, we sought to determine whether or not BRCA mutation carriers with ovarian cancer would benefit from preventive mastectomy or from MRI screening. First, the annual mortality rate for ovarian cancer patients was estimated for a cohort of 178 BRCA mutation carriers from Ontario, Canada. Next, the actuarial risk of developing breast cancer was estimated using an international registry of 509 BRCA mutation carriers with ovarian cancer. A series of simulations was conducted to evaluate the reduction in the probability of death (from all causes) associated with mastectomy and with MRI-based breast surveillance. Cox proportional hazards models were used to evaluate the impacts of mastectomy and MRI screening on breast cancer incidence as well as on all-cause mortality. Twenty (3.9%) of the 509 patients developed breast cancer within ten years following ovarian cancer diagnosis. The actuarial risk of developing breast cancer at ten years post-diagnosis, conditional on survival from ovarian cancer and other causes of mortality was 7.8%. Based on our simulation results, among all BRCA mutation-carrying patients diagnosed with stage III/IV ovarian cancer at age 50, the chance of dying before age 80 was reduced by less than 1% with MRI and by less than 2% with mastectomy. Greater improvements in survival with MRI or mastectomy were observed for women who had already survived 10years after ovarian cancer, and for women with stage I or II ovarian cancer. Among BRCA mutation-carrying ovarian cancer patients without a personal history of breast cancer, neither preventive mastectomy nor MRI screening is warranted, except for those who have survived ovarian cancer without recurrence for ten years and for those with early stage ovarian cancer. Copyright © 2017

  6. Does the health status of intimate partner violence victims warrant pharmacies as portals for public health promotion?

    Science.gov (United States)

    Cerulli, Catherine; Cerulli, Jennifer; Santos, Elizabeth J; Lu, Najii; He, Hua; Kaukeinen, Kimberly; White, Anne Marie; Tu, Xin

    To explore whether the health status of intimate partner violence (IPV) victims warrants pharmacies to be portals for public health promotion. Specific objectives included (1) identifying prevalence of IPV including domestic violence (DV) and sexual assault (SA) in a community sample, (2) describing characteristics and correlates of DV/SA between participants who reported and did not report DV/SA, and (3) exploring whether DV/SA status is related to mental health medication use. Cross sectional. Upstate New York during 2006. English- and Spanish-speaking respondents younger than 65 years of age answering four questions to assess DV/SA. Secondary analysis of a countywide random telephone survey, the 2006 Monroe County Adult Health Survey, which collects prevalence data on health behaviors and health status indicators. To determine whether those reporting DV/SA are at increased odds for mental health medication use, controlling for other sociodemographic- and health-related variables. The survey response rate was 30.3%, with 1,881 respondents meeting inclusion criteria. Those reporting DV/SA were almost twice as likely to use mental health medications. However, when controlling for other variables, only poor mental and physical health were significant in increasing the odds of mental health medication use. The analyses reported here suggest that DV/SA victims in a community sample use mental health medications. When controlling for other variables, survey respondents reported worse physical and mental health. If pharmacies are suitable portals for DV/SA outreach, curricula would need to provide the knowledge and skills needed to take an active role in this public health promotion.

  7. Polyethylene glycol intestinal lavage in addition to usual antibiotic treatment for severe Clostridium difficile colitis: a randomised controlled pilot study.

    Science.gov (United States)

    McCreery, Greig; Jones, Philip M; Kidane, Biniam; DeMelo, Vanessa; Mele, Tina

    2017-07-31

    Clostridium difficile infections (CDI) are common, costly and potentially life threatening. Most CDI will respond to antibiotic therapy, but 3%-10% of all patients with CDI will progress to a severe, life-threatening course. Complete removal of the large bowel is indicated for severe CDI. However, the 30-day mortality following surgical intervention for severe CDI ranges from 20% to 70%. A less invasive approach using surgical faecal diversion and direct colonic lavage with polyethylene glycol (PEG) and vancomycin has demonstrated a relative mortality reduction of approximately 50%. As an alternative to these operative approaches, we propose to treat patients with bedside intestinal lavage with PEG and vancomycin instillation via nasojejunal tube, in addition to usual antibiotic management. Preliminary data collected by our research group are encouraging. We will conduct a 1-year, single-centre, pilot randomised controlled trial to study this new treatment strategy for patients with severe CDI and additional risk factors for fulminant or complicated infection. After informed consent, patients with severe-complicated CDI without immediate indication for surgery will be randomised to either usual antibiotic treatment or usual antibiotic treatment with the addition of 8 L of PEG lavage via nasojejunal tube. This pilot trial will evaluate our eligibility and enrolment rate, protocol compliance and adverse event rates and provide further data to inform a more robust sample size calculation and protocol modifications for a definitive multicentre trial design. Based on historical data, we anticipate enrolling approximately 24 patients during the 1-year pilot study period.As a pilot study, data will be reported in aggregate. Between-group differences will be assessed in a blinded fashion for evidence of harm, and to further refine our sample size calculation. This study protocol has been reviewed and approved by our local institutional review board. Results of the pilot

  8. Hepatitis B virus vaccination booster does not provide additional protection in adolescents: a cross-sectional school-based study.

    Science.gov (United States)

    Chang, Yung-Chieh; Wang, Jen-Hung; Chen, Yu-Sheng; Lin, Jun-Song; Cheng, Ching-Feng; Chu, Chia-Hsiang

    2014-09-23

    Current consensus does not support the use of a universal booster of hepatitis B virus (HBV) vaccine because there is an anamnestic response in almost all children 15 years after universal infant HBV vaccination. We aimed to provide a booster strategy among adolescents as a result of their changes in lifestyle and sexual activity. This study comprised a series of cross-sectional serological surveys of HBV markers in four age groups between 2004 and 2012. The seropositivity rates of hepatitis B surface antigen (HBsAg) and its reciprocal antibody (anti-HBs) for each age group were collected. There were two parts to this study; age-specific HBV seroepidemiology and subgroup analysis, including effects of different vaccine types, booster response for immunogenicity at 15 years of age, and longitudinal follow-up to identify possible additional protection by HBV booster. Within the study period, data on serum anti-HBs and HBsAg in a total of 6950 students from four age groups were collected. The overall anti-HBs and HBsAg seropositivity rates were 44.3% and 1.2%, respectively. The anti-HBs seropositivity rate in the plasma-derived subgroup was significantly higher in both 15- and 18-year age groups. Overall response rate in the double-seronegative recipients at 15 years of age was 92.5% at 6 weeks following one recombinant HBV booster dose. Among the 24 recipients showing anti-HBs seroconversion at 6 weeks after booster, seven subjects (29.2%) had lost their anti-HBs seropositivity again within 3 years. Increased seropositivity rates and titers of anti-HBs did not provide additional protective effects among subjects comprehensively vaccinated against HBV in infancy. HBV booster strategy at 15 years of age was the main contributor to the unique age-related phenomenon of anti-HBs seropositivity rate and titer. No increase in HBsAg seropositivity rates within different age groups was observed. Vaccination with plasma-derived HBV vaccines in infancy provided higher

  9. STUDY ON DECREASE OF NITRITE AND NITRATE USAGE IN PROCESSED MEAT WITH ADDITION OF NATURAL SALT AND CARBON MONOXIDE

    Directory of Open Access Journals (Sweden)

    R. Sakata

    2017-01-01

    Full Text Available This study was carried out to examine the reddening of meat products due to the addition of natural yellow salt (YS and carbon monoxide (CO. Following YS or NaCl addition at 2% to pork subsequent to nitrite (0~100 ppm treatment, color development due to this addition was analyzed optically. Heme pigment content in the meat was also determined spectrophotometrically. YS was found to bring about greater reddening than NaCl, indicating residual nitrite and nitrate content to be significantly higher in meat containing YS, through the amount of either was quite small. The nitrite itself in YS could never explain the color formation by the YS. Because the YS included not only nitrite but also nitrate, the effects of nitrate on the color stability of cooked cured pork were examined. Nitrate inhibited the nitrite decrement and discoloration in the cooked cured ham. The degradation rate of nitrite was clearly found to decrease with nitric acid content. Nitrate does not appear to serve as a donor of nitrite, but rather inhibits nitrite reduction in cooked meat products, with consequent prolongation of color stability. Nitrate, observed in many rock salt and also in this case, could enhance the color formation. CO treatment of pork caused the formation of carboxy myoglobin (COMb with consequent reddening of the meat. COMb was shown to be heat-stable and form stably at pH 5.0 to 8.0 and to be extractable with water, but was barely extractable at all with acetone. Nitric oxide was found to have greater affinity toward myoglobin (Mb than CO. Nitrosyl Mb was noted to be stable in all meat products examined. CO was seen to be capable of controlling the extent of lipid oxidation.

  10. A randomized, controlled study evaluating effects of amlodipine addition to chelators to reduce iron loading in patients with thalassemia major.

    Science.gov (United States)

    Eghbali, Aziz; Kazemi, Hamideh; Taherahmadi, Hassan; Ghandi, Yazdan; Rafiei, Mohammad; Bagheri, Bahador

    2017-12-01

    Cardiomyopathy due to iron overload can be fatal in patients with thalassemia major. Calcium channel blockers seem to be effective to reduce iron loading. Our goal was to study effects of amlodipine addition to chelators on iron loading in patients with thalassemia major. This randomized, controlled, and single-center trial was performed on 56 patients with thalassemia major. Patients were randomized 1:1 to combined group (iron chelator plus amlodipine) or control group (iron chelator) for 1 year. Iron content was measured by magnetic resonance imaging; heart T2*, and liver T2*. Serum ferritin was also measured. After 12 months of treatment, myocardial T2* values had significant improvement in combined group (21.9 ± 8.0 ms to 24.5 ± 7.6 ms; P < .05); Difference between two groups was significant (P = .02). Combined treatment had no effect on hepatic T2* value (9.6 ± 2.8 ms to 9.5 ± 3.6 ms); difference between two groups was not significant (P = .2). In addition, a significant reduction was seen in serum ferritin levels in two groups. Mild gastrointestinal upset was the most common untoward effect. Addition of amlodipine to iron chelators has beneficial effects for reduction of iron loading in patients with thalassemia major. This combination therapy seems safe. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Histological and biomechanical analysis of porous additive manufactured implants made by direct metal laser sintering: a pilot study in sheep.

    Science.gov (United States)

    Stübinger, Stefan; Mosch, Isabel; Robotti, Pierfrancesco; Sidler, Michéle; Klein, Karina; Ferguson, Stephen J; von Rechenberg, Brigitte

    2013-10-01

    It was the aim of this study to analyze osseointegrative properties of porous additive manufactured titanium implants made by direct metal laser sintering in a sheep model after an implantation period of 2 and 8 weeks. Three different types of implants were placed in the pelvis of six sheep. In each sheep were placed three standard machined (M), three sandblasted and etched (SE), and three porous additive manufactured (AM) implants. Of these three implants (one per type) were examined histologically and six implants were tested biomechanically. Additionally a semiquantitative histomorphometrical and qualitative fluorescent microscopic analysis were performed. After 2 and 8 weeks bone-to-implant-contact (BIC) values of the AM surface (2w: 20.49% ± 5.18%; 8w: 43.91% ± 9.69%) revealed no statistical significant differences in comparison to the M (2w: 20.33% ± 11.50%; 8w: 25.33% ± 4.61%) and SE (2w: 43.67 ± 12.22%; 8w: 53.33 ± 8.96%) surfaces. AM surface showed the highest increase of the BIC between the two observation time points. Considering the same implantation period histomorphometry and fluorescent labelling disclosed no significant differences in the bone surrounding the three implants groups. In contrast Removal-torque-test showed a significant improve in fixation strength (P ≤ 0.001) for the AM (1891.82 ± 308, 44 Nmm) surface after eight weeks in comparison to the M (198.93±88,04 Nmm) and SE (730.08 ± 151,89 Nmm) surfaces. All three surfaces (M, SE, and AM) showed sound osseointegration. AM implants may offer a possible treatment option in clinics for patients with compromised bone situations. Copyright © 2013 Wiley Periodicals, Inc., a Wiley Company.

  12. Study of sorption of two sulfonylurea type of herbicides and their additives on soils and soil components.

    Science.gov (United States)

    Földényi, Rita; Tóth, Zoltán; Samu, Gyöngyi; Érsek, Csaba

    2013-01-01

    The sorption of two sulfonylurea type herbicides (chlorsulfuron: (1-(2-chlorophenylsulfonyl)-3-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)urea; tribenuron methyl: (methyl-2-[N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-3-(methyl-ureido)-sulfonyl]-benzoate) was studied on sand and chernozem soil adsorbents. Experimental results for solutions prepared from the pure ingredients were compared to those prepared from the appropriate formulated commercial products. At small concentrations, the extent of adsorption of the active ingredient was higher than from the formulation containing solutions. Environmental fate and effects of the forming agents are less investigated because they rarely have concentration limits recommended by authorities. In addition to the adsorption of active ingredients, therefore, the sorption behavior of a widely used additive Supragil WP (sodium diisopropyl naphthalene sulphonate) was also studied. This dispersant is an anionic forming agent applied in a lot of pesticide formulations. Using three different soils (sand, brown forest, chernozem) as adsorbents two-step isotherms were obtained. The role of the soil organic matter (OM) was significant in the adsorption mechanism because the adsorbed amounts of the dispersant correlated with the specific surface area as well as with the total organic carbon (TOC) content of the soils. The sorption behavior indicates the operation of hydrophobic interaction mechanism between the soil OM and the dispersant. These results are supported by our further sorption experiments on clays, too. Zeta potential measurements seem to be promising for the interpretation of multi-step isotherms. The application of this technique proved that higher concentrations of the anionic forming agent assisted the peptization of soil organic matter (SOM) resulting in stable colloidal solution dominated by negative charges. Since the pesticides investigated are also anionic at the studied pH (7 and 8.3) the dissolved organics lead to the

  13. Reactions of N+ ions with ethylene: a theoretical study on the addition mechanism into the olefin double bond

    International Nuclear Information System (INIS)

    Di Stefano, Marco; Rosi, Marzio; Sgamellotti, Antonio

    2004-01-01

    The potential energy surface of the reaction between ethylene molecules and N + ions is investigated by using the DFT hybrid functional B3LYP with the 6-31G* basis set. The addition channel leading to the intermediate C 2 NH 4 + is considered. We study eighteen structures of the triplet C 2 NH 4 + cations and the transition states for their isomerizations. Then, we consider the release of a H atom to form the doublet C 2 NH 3 + cations. To obtain more accurate values of reaction energetics and barrier heights, coupled cluster CCSD(T) calculations with the 6-311G** basis set are performed on the B3LYP/6-31G* optimized geometries. The addition of N + into C 2 H 4 is computed as a barrierless process leading to the triplet 1-aziridynil cation which, by ring opening, can easily evolve into the 2-azaallyl isomer. This species can then release a hydrogen atom to form the 2-azaallene cation, process that is computed to be the most likely channel

  14. Additional Virtual Reality Sitting Balance Training Using XBox Kinect™ in Patients with Neurological Disorders: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Xina Henry Quadros

    2017-10-01

    Full Text Available Introduction: Sitting balance is a prerequisite to upper extremity function, standing and walking, which is affected in various neurological diseases. It is important to attain a good level of sitting balance before one can proceed to standing. In recent years, virtual reality game training has gained a widespread application. Aim: This pilot study aimed to examine the role of additional virtual reality sitting balance training using a commercial interactive virtual reality system- Xbox Kinect™ in patients with neurological disorders. Materials and Methods: Four patients with sitting balance impairments following neurological disorders received two weeks of virtual reality based therapy along with the conventional physiotherapy. Sitting balance was evaluated using FIST (Function In Sitting Test scores at baseline, one week and after two weeks of intervention. Results: All four patients showed clinically significant improvement in FIST score between the pre and post intervention. Percentage of improvement in FIST score was approximately 27% with a minimum change of 10 points in the FIST score Minimal Clinically Important Difference (MCID=6.5. Conclusion: Additional virtual reality training may improve sitting balance control in neurological patients with balance impairments. It can be used as an adjunct in routine neurorehabilitation.

  15. A Mathematical Study on “Additive Technique” Versus “Branch and Bound Technique” for Solving Binary Programming Problem

    Science.gov (United States)

    Sufahani, Suliadi; Ghazali Kamardan, M.; Saifullah Rusiman, Mohd; Mohamad, Mahathir; Khalid, Kamil; Ali, Maselan; Khalid, Kamal; Nawawi, MKM; Ahmad, Asmala

    2018-04-01

    A solid body needs adequate supplements from nourishment that we eat each day. Eating pretty much than what our body needs will prompt lack of healthy sustenance (under-nourishment and over-nourishment). In Malaysia, a few reviews have been directed to examine the wholesome status of Malaysians, particularly among youngsters and youths. However there are different methods for taking care of the menu arranging issue and in this paper Binary Programming (BP) is executed. Separately, “Additive Technique (AT)” and “Branch and Bound Technique (BBT)” are utilized as a part of BP. Both methodologies utilize diverse systems and might yield distinctive ideal arrangements. Along these lines, this study expects to build up a scientific model for eating regimen arranging that meets the essential supplement admission and look at the outcomes yield through additive substance and branch and bound methodologies. The information was gathered from different all inclusive schools and furthermore from the Ministry of Education. The model was illuminated by utilizing the Balas Algorithm through AT and Binary Programming through BBT.

  16. The Effectiveness of Ultrasonography in Detecting Emergent Pediatric Pathologies and Requirement for Additional Imaging Techniques: A Retrospective Study

    Directory of Open Access Journals (Sweden)

    Betül Tiryaki Baştuğ

    2018-04-01

    Full Text Available Introduction: In emergency cases, ultrasonography is used in guiding resuscitation, to provide procedural guidance, and confirm a clinical diagnosis. In addition, it may prevent unnecessary exposure of the patient to ionizing radiation and risks caused by transporting the patient away from monitoring. This paper aimed to evaluate the effectiveness of ultrasonography in detecting emergent pediatric pathologies in a state hospital radiology unit, and to identify whether additional imaging techniques, such as computed tomography, were required. Methods: This study was designed as a retrospective investigation. A group of 536 patients were randomly selected from 1.401 pediatric patients who underwent ultrasonography for non-traumatic emergent pathologies between 2015 and 2016. Results: Of the 536 patients, 46 were diagnosed with appendicitis, 14 with pathologies of the urinary system, 1 with ileus, 29 with mesenteric lymphadenitis, 4 with intussusception, 3 with ovarian cyst rupture, 1 with ovarian torsion, and 32 with scrotal pathologies. Computed tomography was performed for 20 patients. Ureteral calculi and appendicitis were confirmed by computed tomography in 5 and 14 patients, respectively, after being identified as secondary findings by ultrasonography. In 1 patient, ileus was verified by computed tomography. The sensitivity of ultrasonography was determined to be 85.7%. Only 14% of patients were not given definite pathological diagnoses by ultrasonography alone. Subsequent computed tomography for verifying secondary findings detected by ultrasonography was essential in only 20 patients. Conclusion: Our results promote the use of ultrasonography as the initial imaging test for evaluating pediatric patients with suspected emergency pathologies.

  17. Additional cash incentive within a conditional cash transfer scheme: a 'controlled before and during' design evaluation study from India.

    Science.gov (United States)

    Lahariya, Chandrakant; Mishra, Ashok; Nandan, Deoki; Gautam, Praveen; Gupta, Sanjay

    2011-01-01

    Conditional Cash Transfer (CCT) schemes have shown largely favorable changes in the health seeking behavior. This evaluation study assesses the process and performance of an Additional Cash Incentive (ACI) scheme within an ongoing CCT scheme in India, and document lessons. A controlled before and during design study was conducted in Madhya Pradesh state of India, from August 2007 to March 2008, with increased in institutional deliveries as a primary outcome. In depth interviews, focus group discussions and household surveys were done for data collection. Lack of awareness about ACI scheme amongst general population and beneficiaries, cumbersome cash disbursement procedure, intricate eligibility criteria, extensive paper work, and insufficient focus on community involvement were the major implementation challenges. There were anecdotal reports of political interference and possible scope for corruption. At the end of implementation period, overall rate of institutional deliveries had increased in both target and control populations; however, the differences were not statistically significant. No cause and effect association could be proven by this study. Poor planning and coordination, and lack of public awareness about the scheme resulted in low utilization. Thus, proper IEC and training, detailed implementation plan, orientation training for implementer, sufficient budgetary allocation, and community participation should be an integral part for successful implementation of any such scheme. The lesson learned this evaluation study may be useful in any developing country setting and may be utilized for planning and implementation of any ACI scheme in future.

  18. Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing

    Science.gov (United States)

    Zielinski, Jonas; Mindt, Hans-Wilfried; Düchting, Jan; Schleifenbaum, Johannes Henrich; Megahed, Mustafa

    2017-12-01

    Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing the manufacturing process of a demonstration component. Powder characterization including assessment of the reusability, assessment of material consolidation and process window optimization is pursued prior to applying the identified optima to study the distortion and residual stresses of the demonstrator. Comparisons of numerical predictions with measurements show good correlations along the complete numerical chain.

  19. Study of parameters of heat treatment in obtaining glass ceramic materials with addition of the industrial waste

    International Nuclear Information System (INIS)

    Kniess, C.T.; Prates, P.B.; Martins, G.J.M.; Riella, H.G.; Matsinhe, Jonas; Kuhnen, N.C.

    2012-01-01

    The production of materials from crystallization of glass, called glass ceramic, have proved interesting by the possibility of development of different microstructures, with reduced grain size and the presence of residual amorphous phase in different quantities. The method that uses the differential thermal analysis (DTA) provides research on the material properties over a wide temperature range, it's widely applied to crystallization processes of glass ceramic materials. Within this context, this paper aims to study the kinetics of nucleation and crystal growth in glass ceramic materials in the system SiO 2 - Al 2 O 3 -Li 2 O, obtained with the addition of mineral coal bottom ash as source of aluminosilicates, through the technique of differential thermal analysis. (author)

  20. [Is surgical education associated with additional costs? A controlled economic study on the German DRG System for primary TKA].

    Science.gov (United States)

    Göbel, P; Piesche, K; Randau, T; Wimmer, M D; Wirtz, D C; Gravius, S

    2013-04-01

    Total knee arthroplasty (TKA) is one of the most common procedures in orthopaedic surgery, the cost of surgical training has as yet not been quantified. In a pilot study, we investigated the economic impact of surgical training under DRG system influences, analysing the cost-proceeds structure in surgical training for orthopaedic residents. Consecutive TKAs were performed by the most educated surgeon (Group A) having implanted ≥ 1000 TKAs, another attending (Group B) with ≥ 200 TKAs and a resident (Group C) having assisted in 25 TKAs (n = 30 patients per Group A-C). All patients were embedded in a standardised clinical pathway. By analysing the costs parameters such as numbers of blood transfusions, the operating time and the length of stay in the hospital we investigated the health care-related costs matched to the DRG-based financial refunding. Data were analysed after undergoing a analysis of variance followed by a post-hoc Scheffé procedure. On the one hand the resident generated additional costs of 1111,7 ± 97 € in comparison to the Group A surgeon and 1729,8 ± 152 € compared to the attending Group B (p > 0,05), these were generated by longer stay in hospital, longer operation time and higher need of resources. On the other hand there were significantly higher proceeds of the Group C in comparison to the attending Group B and also to Group A: 474,78 ± 82 € vs. A and 150,54 ± 52 € vs. Group B (p DRG. Overall the deficit per patient treated by the resident is 637 ± 77 € vs. Group A and 1579,3 ± 137 € vs. Group B (p > 0,05). The German DRG matrix results in higher profits accounted to the learning surgeon by increased PCCL relevant status and grouping the case to a more profitable DRG. Hereby, the additional costs are only partly redeemed. Surgical education of residents is associated with additional costs for the hospital. These costs have to be redeemed to allow good surgical training for hospitals having good teaching conditions. Georg

  1. Can Homeopathy Bring Additional Benefits to Thalassemic Patients on Hydroxyurea Therapy? Encouraging Results of a Preliminary Study

    Directory of Open Access Journals (Sweden)

    Antara Banerjee

    2010-01-01

    Full Text Available Several homeopathic remedies, namely, Pulsatilla Nigricans (30th potency, Ceanothus Americanus (both mother tincture and 6th potency and Ferrum Metallicum (30th potency selected as per similia principles were administered to 38 thalassemic patients receiving Hydroxyurea (HU therapy for a varying period of time. Levels of serum ferritin (SF, fetal hemoglobin (HbF, hemoglobin (Hb, platelet count (PC, mean corpuscular volume (MCV, mean corpuscular hemoglobin concentration (MCHC, mean corpuscular hemoglobin (MCH, white blood cell (WBC count, bilirubin content, alanine amino transferase (ALT, aspartate amino transferase (AST and serum total protein content of patients were determined before and 3 months after administration of the homeopathic remedies in combination with HU to evaluate additional benefits, if any, derived by the homeopathic remedies, by comparing the data with those of 38 subjects receiving only HU therapy. Preliminary results indicated that there was a significant decrease in the SF and increase in HbF levels in the combined, treated subjects. Although the changes in other parameters were not so significant, there was a significant decrease in size of spleen in most patients with spleenomegaly and improvement in general health conditions along with an increased gap between transfusions in most patients receiving the combined homeopathic treatment. The homeopathic remedies being inexpensive and without any known side-effects seem to have great potentials in bringing additional benefits to thalassemic patients; particularly in the developing world where blood transfusions suffer from inadequate screening and fall short of the stringent safety standards followed in the developed countries. Further independent studies are encouraged.

  2. A comparative study of functional properties of normal and wooden breast broiler chicken meat with NaCl addition.

    Science.gov (United States)

    Xing, Tong; Zhao, Xue; Han, Minyi; Cai, Linlin; Deng, Shaolin; Zhou, Guanghong; Xu, Xinglian

    2017-09-01

    The selection of broilers for augmented growth rate and breast has brought about wooden-breast (WB) muscle abnormalities, which caused substantial economic losses. The objective of this study was to compare water holding capacity, water mobility and distribution, salt-soluble protein (SSP) content, and protein profiles of normal and WB chicken meat with different additions of NaCl. Thirty WB and 30 normal chicken breasts were selected from a deboning line of a major Chinese processing plant at 2 to 3 h post mortem. Two different meat batters were formulated to 150 mg/g meat protein and different NaCl contents (0%, 1%, 2%, 3%, and 4%). Results indicated that as NaCl contents increased, the cooking loss of meat batters decreased (P meat showed different protein profiles, with myosin heavy chain exhibiting a higher intensity at ≥3% salt level. Low-field nuclear magnetic resonance (LF-NMR)revealed an increased T22 and higher P22 in raw WB meat compared to normal meat (P meat batters, WB meat batters had reduced T21 and lower immobilized water proportions at low NaCl contents (meat gels. Meat gels prepared from WB had a lower proportion of water within the myofibrillar protein matrix and a greater proportion of exuded bulk water at NaCl contents meat, meat batters and gels, water distribution and mobility of WB exhibited significant differences compared to normal meat. The addition of NaCl affected water mobility and distributions in meat batters, with a level of 3% NaCl eliminating the differences between processed normal and WB meat products. © 2017 Poultry Science Association Inc.

  3. Additional risk factors for infection by multidrug-resistant pathogens in healthcare-associated infection: a large cohort study

    Directory of Open Access Journals (Sweden)

    Cardoso Teresa

    2012-12-01

    Full Text Available Abstract Background There is a lack of consensus regarding the definition of risk factors for healthcare-associated infection (HCAI. The purpose of this study was to identify additional risk factors for HCAI, which are not included in the current definition of HCAI, associated with infection by multidrug-resistant (MDR pathogens, in all hospitalized infected patients from the community. Methods This 1-year prospective cohort study included all patients with infection admitted to a large, tertiary care, university hospital. Risk factors not included in the HCAI definition, and independently associated with MDR pathogen infection, namely MDR Gram-negative (MDR-GN and ESKAPE microorganisms (vancomycin-resistant Enterococcus faecium, methicillin-resistant Staphylococcus aureus, extended-spectrum beta-lactamase-producing Escherichia coli and Klebsiella species, carbapenem-hydrolyzing Klebsiella pneumonia and MDR Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter species, were identified by logistic regression among patients admitted from the community (either with community-acquired or HCAI. Results There were 1035 patients with infection, 718 from the community. Of these, 439 (61% had microbiologic documentation; 123 were MDR (28%. Among MDR: 104 (85% had MDR-GN and 41 (33% had an ESKAPE infection. Independent risk factors associated with MDR and MDR-GN infection were: age (adjusted odds ratio (OR = 1.7 and 1.5, p = 0.001 and p = 0.009, respectively, and hospitalization in the previous year (between 4 and 12 months previously (adjusted OR = 2.0 and 1,7, p = 0.008 and p = 0.048, respectively. Infection by pathogens from the ESKAPE group was independently associated with previous antibiotic therapy (adjusted OR = 7.2, p p = 0.003. Patients with infection by MDR, MDR-GN and pathogens from the ESKAPE group had significantly higher rates of inadequate antibiotic therapy than those without (46% vs 7%, 44% vs 10%, 61% vs 15%, respectively, p

  4. Additions and corrections to the bibliography of geologic studies, Columbia Plateau (Columbia River Besalt) and adjacent Areas, in Idaho, 1980

    International Nuclear Information System (INIS)

    Strowd, W.

    1980-01-01

    This bibliography is an update to Idaho Bureau of Mines and Geology Open-File Report 78-6, Bibliography of Geological Studies, Columbia Plateau (Columbia River Basalt Group) and adjacent areas in Idaho (also known as Rockwell Hanford Operations' contractor report RHO-BWI-C-44). To keep the original document current, this additions and corrections report was prepared for the Basalt Waste Isolation Project of Rockwell Hanford Operations. This update is supplementary; therefore, references cited in the original document have not been included here. What is included are materials that have become available since the original publication and pertinent literature that had originally been overlooked. Accompany this updated bubliography are index maps that show locations of geologic studies and geochemical petrographic, remanent paleomagnetic, and radiometric age-dated sites within the Columbia River Basalt Group field within Idaho; also identified are archeological sites, test wells, mines, quarries, and other types of excavations. References on the index maps are keyed to the bibliography and cover the Spokane, Pullman, Hamilton, Grangeville, Elk City, Baker, Boise, and Jordan Valley Army Map Service two-degree quadrangles

  5. Studying the Combination Effect of Additives and Micro Steel Fibers on Cracks of Self-Healing Concrete

    Directory of Open Access Journals (Sweden)

    Muhannad Hussien Muhsin

    2017-01-01

    Full Text Available In this study, the effect of the combination of micro steel fibers and additives (calcium hydroxide and sodium carbonate on the size of cracks formation and healing them were investigated. This study aims to apply the use of self-healing phenomenon to repair cracks and to enhance the service life of the concrete structures. Micro steel fibers straight type were used in this research with 0.2% and 0.4% by volume of concrete. A weight of 20 and 30 kg/m3 of Ca(OH2 and 2 and 3 kg/m3 of Na2CO3 were used as a partial cement replacement. The results confirm that the concrete cracks were significantly self-healed up to 30 days re-curing. Cracks width up to 0.2 mm were completely self-healed after re-curing for 90 days by using the combination of micro steel fiber of 0.4% by volume of concrete and 25 kg/m3 of Ca(OH2 and 2.5 kg/m3 of Na2CO3 as a partial replacement of cement. Products of Self-healing are observed by Scanning Electron Microscopy (SEM with Energy Dispersive X-Ray Analysis (EDX. It was found that self-healing occurred mainly due to precipitation of calcium carbonate.

  6. When pathological and radiological correlation is achieved, excision of fibroadenoma with lobular neoplasia on core biopsy is not warranted.

    Science.gov (United States)

    Fives, C; O'Neill, C J; Murphy, R; Corrigan, M A; O'Sullivan, M J; Feeley, L; Bennett, M W; O'Connell, F; Browne, T J

    2016-12-01

    The diagnosis and management of lobular neoplasia (LN) including lobular carcinoma in situ (LCIS) and atypical lobular hyperplasia (ALH) remains controversial. Current management options after a core needle biopsy (CNB) with lobular neoplasia (LN) incorporating both ALH and LCIS include excision biopsy or careful clinical and radiologic follow up. A retrospective analysis of the surgical database at Cork University Hospital was performed to identify all core needle biopsies from January 1st 2010 to 31st December 2013 with a diagnosis of FA who subsequently underwent surgical excision biopsy. All cases with associated LN including ALH and classical LCIS were selected. We excluded cases with coexistent ductal carcinoma in situ (DCIS), invasive carcinoma, LN associated with necrosis, pleomorphic lobular carcinoma in situ (PLCIS) or lesions which would require excision in their own right (papilloma, radial scar, atypical ductal hyperplasia (ADH) or flat epithelial atypia (FEA)). Cases in which the radiologic targeted mass was discordant with a diagnosis of FA were also excluded. 2878 consecutive CNB with a diagnosis of FA were identified. 25 cases had a diagnosis of concomitant ALH or classical LCIS. Our study cohort consisted of 21 women with a mean age 53 years (age range 41-70 years). The core biopsy diagnosis was of LCIS and FA in 16 cases and ALH and FA in 5 cases. On excision biopsy, a FA was confirmed in all 21 cases. In addition to the FA, residual LCIS was present in 14 cases with residual ALH in 2 cases. One of the twenty-one cases (4.8%) was upgraded to invasive ductal carcinoma on excision. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. How much complexity is warranted in a rainfall-runoff model? Findings obtained from symbolic regression, using Eureqa

    Science.gov (United States)

    Abrahart, R. J.; Beriro, D. J.

    2012-04-01

    The information content in a rainfall-runoff record is sufficient to support models of only very limited complexity (Jakeman and Hornberger, 1993). This begs the question of what limits should observed data place on the allowable complexity of rainfall-runoff models? Eureqa1 (Schmidt and Lipson, 2009) - pronounced "eureka" - is a software tool for finding equations and detecting mathematical relationships in a dataset. The challenge, for both software and modeller, is to identify, by means of symbolic regression, the simplest mathematical formulas which describe the underlying mechanisms that produced the data. It actually delivers, however, a series of preferred modelling solutions comprising one champion for each specific level of complexity i.e. related to solution enlargement involving the progressive incorporation of additional permitted factors (internal operators/ external drivers). The potential benefit of increased complexity can as a result be assessed in a rational manner. Eureqa is free to download and use; and, in the current study, has been employed to construct a set of rainfall-runoff transfer function models for the Annapolis River at Wilmot, in north-western Nova Scotia, Canada. The climatic conditions in this catchment present an interesting set of modelling challenges; daily variations and seasonal changes in temperature, snowfall and retention result in great difficulty for runoff prediction by means of a data-driven approach. Data from 10 years of daily observations are used in the present study (01/01/2000-31/12/2009): comprising [i] discharge, [ii] total rainfall (excluding snowfall), [iii] total snowfall, [iv] thickness of snow cover, and [v] maximum and [vi] minimum temperature. Precipitation occurs throughout the whole year being slightly lower during summer. Snowfall is common from November until April and rare hurricane weather may occur in autumn. The average maximum temperature is below 0 0C in January and February, but significant

  8. Primary study on image addition technique in CT measuring used to determine the malalignment of patellofemoral joints

    International Nuclear Information System (INIS)

    Huan Jian; Gong Jianping; Zhu Jianbing; Dong Qirong; Lu Zhian

    2000-01-01

    Objective: To evaluate the use of image addition technique in the field of CT measuring on patellofemoral joints. Method: In contractive condition and relaxant condition of quadriceps, 60 knee joints of 30 patients (47 knee joints accompanied with peri-patellar pain) were examined by CT scanning, and the CT image addition and single technique. Results: In contractive and relaxant condition of quadriceps in the normal group, the difference between index measured by image addition technique were not significant and it was found that demonstrated measurement error of image addition was smaller, but there was significant difference between index measured by single technique, and it suggests that its replication was bad. Conclusion: Use of image addition technique can decrease measurement error and play a important role on accurately determining the malalignment of patellofemoral joints

  9. Additive Complex Ayurvedic Treatment in Patients with Fibromyalgia Syndrome Compared to Conventional Standard Care Alone: A Nonrandomized Controlled Clinical Pilot Study (KAFA Trial

    Directory of Open Access Journals (Sweden)

    Christian S. Kessler

    2013-01-01

    Full Text Available Background. Fibromyalgia (FMS is a challenging condition for health care systems worldwide. Only limited trial data is available for FMS for outcomes of complex treatment interventions of complementary and integrative (CIM approaches. Methods. We conducted a controlled, nonrandomized feasibility study that compared outcomes in 21 patients treated with Ayurveda with those of 11 patients treated with a conventional approach at the end of a two-week inpatient hospital stay. Primary outcome was the impact of fibromyalgia on patients as assessed by the FIQ. Secondary outcomes included scores of pain intensity, pain perception, depression, anxiety, and quality of sleep. Follow-up assessments were done after 6 months. Results. At 2 weeks, there were comparable and significant improvements in the FIQ and for most of secondary outcomes in both groups with no significant in-between-group differences. The beneficial effects for both treatment groups were partly maintained for the main outcome and a number of secondary outcomes at the 6-month followup, again with no significant in-between-group differences. Discussion. The findings of this feasibility study suggest that Ayurvedic therapy is noninferior to conventional treatment in patients with severe FMS. Since Ayurveda was only used as add-on treatment, RCTs on Ayurveda alone are warranted to increase model validity. This trial is registered with NCT01389336.

  10. Analysis of additional hotel services in the international luxury hotels – a case-study from Budapest

    Directory of Open Access Journals (Sweden)

    Juhász-Dóra Katalin

    2017-07-01

    Full Text Available The investigation of additional services from the aspect of local embeddedness is a novelty in the academic literature related to the tourism and hotel industry. The primary function of hotels is to provide accommodation and other services for the hotel-guests. Secondarily, they may also offer complementary-services and a community space for the city-residents and for non-hotel guests. Due to the globalization, the change in the consumer behaviour and global firms, the question of location and local resources are becoming more and more significant especially in the case of international hotel chains. The international hotel company is a member of a hotel market at a specific location, and it is surrounded by a sociological environment, local people, culture and traditions which have an impact on the competitiveness of the hotel. The author explains the results with the application of the multidimensional scaling model, finding answers for the questions in which ways the local embeddedness can have an effect on the competitiveness of a hotel based on a case-study carried out in a five-star hotel (member of an international chain of Budapest in 2016.

  11. Tropical Tropospheric Ozone from SHADOZ (Southern Hemisphere ADditional Ozonesondes) Network: A Project for Satellite Research, Process Studies, Education

    Science.gov (United States)

    Thompson, Anne M.; Witte, Jacquelyn C.; Oltmans, Samuel J.; Schmidlin, Francis J.; Coetzee, G. J. R.; Hoegger, Bruno; Kirchhoff, V. W. J. H.; Ogawa, Toshihiro; Kawakami, Shuji; Posny, Francoise

    2002-01-01

    The first climatological overview of total, stratospheric and tropospheric ozone in the southern hemisphere tropical and subtropics is based on ozone sounding data from 10 sites comprising the Southern Hemisphere Additional OZonesondes (SHADOZ) network. The period covered is 1998-2000. Observations were made over: Ascension Island; Nairobi, Kenya; Irene, South Africa; Reunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil. Campaign data were collected on a trans-Atlantic oceanographic cruise and during SAFARI-2000 in Zambia. The ozone data, with simultaneous temperature profiles to approx. 7 hPa and relative humidity to approx. 200 hPa, reside at: . SHADOZ ozone time-series and profiles give a perspective on tropical total, stratospheric and tropospheric ozone. Prominent features are highly variable tropospheric ozone and a zonal wave-one pattern in total (and tropospheric) column ozone. Total, stratospheric and tropospheric column ozone amounts peak between August and November and are lowest between March and May. Tropospheric ozone variability over the Indian and Pacific Ocean displays influences of the Indian Ocean Dipole and convective mixing. Pollution transport from Africa and South America is a seasonal feature. Tropospheric ozone seasonality over the Atlantic Basin shows effects of regional subsidence and recirculation as well as biomass burning. Dynamical and chemical influences appear to be of comparable magnitude though model studies are needed to quantify this.

  12. High-Dimensional Additive Hazards Regression for Oral Squamous Cell Carcinoma Using Microarray Data: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Omid Hamidi

    2014-01-01

    Full Text Available Microarray technology results in high-dimensional and low-sample size data sets. Therefore, fitting sparse models is substantial because only a small number of influential genes can reliably be identified. A number of variable selection approaches have been proposed for high-dimensional time-to-event data based on Cox proportional hazards where censoring is present. The present study applied three sparse variable selection techniques of Lasso, smoothly clipped absolute deviation and the smooth integration of counting, and absolute deviation for gene expression survival time data using the additive risk model which is adopted when the absolute effects of multiple predictors on the hazard function are of interest. The performances of used techniques were evaluated by time dependent ROC curve and bootstrap .632+ prediction error curves. The selected genes by all methods were highly significant (P<0.001. The Lasso showed maximum median of area under ROC curve over time (0.95 and smoothly clipped absolute deviation showed the lowest prediction error (0.105. It was observed that the selected genes by all methods improved the prediction of purely clinical model indicating the valuable information containing in the microarray features. So it was concluded that used approaches can satisfactorily predict survival based on selected gene expression measurements.

  13. Additive technology of soluble mold tooling for embedded devices in composite structures: A study on manufactured tolerances

    Science.gov (United States)

    Roy, Madhuparna

    Composite textiles have found widespread use and advantages in various industries and applications. The constant demand for high quality products and services requires companies to minimize their manufacturing costs, and delivery time in order to compete in general and niche marketplaces. Advanced manufacturing methods aim to provide economical methods of mold production. Creation of molding and tooling options for advanced composites encompasses a large portion of the fabrication time, making it a costly process and restraining factor. This research discusses a preliminary investigation into the use of soluble polymer compounds and additive manufacturing to fabricate soluble molds. These molds suffer from dimensional errors due to several factors, which have also been characterized. The basic soluble mold of a composite is 3D printed to meet the desired dimensions and geometry of holistic structures or spliced components. The time taken to dissolve the mold depends on the rate of agitation of the solvent. This process is steered towards enabling the implantation of optoelectronic devices within the composite to provide sensing capability for structural health monitoring. The shape deviation of the 3D printed mold is also studied and compared to its original dimensions to optimize the dimensional quality to produce dimensionally accurate parts. Mechanical tests were performed on compact tension (CT) resin samples prepared from these 3D printed molds and revealed crack propagation towards an embedded intact optical fiber.

  14. Study of Supported Nickel Catalysts Prepared by Aqueous Hydrazine Method. Hydrogenating Properties and Hydrogen Storage: Support Effect. Silver Additive Effect

    International Nuclear Information System (INIS)

    Wojcieszak, R.

    2006-06-01

    We have studied Ni or NiAg nano-particles obtained by the reduction of nickel salts (acetate or nitrate) by hydrazine and deposited by simple or EDTA-double impregnation on various supports (γ-Al 2 O 3 , amorphous or crystallized SiO 2 , Nb 2 O 5 , CeO 2 and carbon). Prepared catalysts were characterized by different methods (XRD, XPS, low temperature adsorption and desorption of N 2 , FTIR and FTIR-Pyridine, TEM, STEM, EDS, H 2 -TPR, H 2 -adsorption, H 2 -TPD, isopropanol decomposition) and tested in the gas phase hydrogenation of benzene or as carbon materials in the hydrogen storage at room temperature and high pressure. The catalysts prepared exhibited better dispersion and activity than classical catalysts. TOF's of NiAg/SiO 2 or Ni/carbon catalysts were similar to Pt catalysts in benzene hydrogenation. Differences in support acidity or preparation method and presence of Ag as metal additive play a crucial role in the chemical reduction of Ni by hydrazine and in the final properties of the materials. Ni/carbon catalysts could store significant amounts of hydrogen at room temperature and high pressure (0.53%/30 bars), probably through the hydrogen spillover effect. (author)

  15. Evaluation and Study the Effect of Additives and Other Factors on Tensile Strength of Asphalt Paving Mixtures

    Directory of Open Access Journals (Sweden)

    Hanaa Khaleel A. Al-Baiti

    2012-03-01

    Full Text Available The resistance of asphaltic concrete to cracking is dependent upon its tensile strength and flexibility characteristics. Also the low tensile strength has recognized as a major contributor to other performance problems. The fatigue life of mixtures decreases exponentially with decreasing of tensile strength. This trend is justified by the loss in stiffness and thereby initiating cracks and stripping. The main objective of this research is intended to study the effect of different variables related with the used materials and the external conditions on the tensile strength and predict a model of indirect tensile strength in asphalt concrete paving materials under the local prevailing conditions and investigate the effect of percent of additives of (Polyestrene resins and Hydrated Lime to enhance the resistance ability of asphalt concrete mixture against distresses. The main affected factors; soaking, asphalt content, compaction, aggregate maximum size and temperature, influence on the indirect tensile strength and presented through a statistics analysis model for tensile strength in asphalt mixture

  16. Pragmatic meaning in court interpreting: An empirical study of additions in consecutively interpreted question-answer dialogues

    DEFF Research Database (Denmark)

    Jacobsen, Bente

    Focusing on additions, my PhD thesis aims to demonstrate that, contrary to the expectation of most legal systems, court interpreters do not function as mere translating devices, but participate actively in the process of negotiating meaning in the courtroom.......Focusing on additions, my PhD thesis aims to demonstrate that, contrary to the expectation of most legal systems, court interpreters do not function as mere translating devices, but participate actively in the process of negotiating meaning in the courtroom....

  17. Bank customers’ satisfaction, customers’ loyalty and additional purchases of banking products and services. A case study from the Czech Republic

    OpenAIRE

    Chochoľáková, Anna; Gabčová, Lenka; Belás, Jaroslav; Sipko, Juraj

    2015-01-01

    The aim of this article was to examine and quantify 1) the dependence of additional purchases of banking products from customer loyalty and 2) dependence of bank clients’ loyalty from their satisfaction with the bank’s customer service. The respondents from our research in 2014 were divided into satisfied (loyal) and dissatisfied (disloyal) banking clients. Their attitudes in the area of loyalty and additional purchases of banking products were compared. Differences in attitudes were examined...

  18. Pilot study on the additive effects of berberine and oral type 2 diabetes agents for patients with suboptimal glycemic control

    Directory of Open Access Journals (Sweden)

    Di Pierro F

    2012-07-01

    Full Text Available Francesco Di Pierro,1 Nicola Villanova,2 Federica Agostini,2 Rebecca Marzocchi,2 Valentina Soverini,2 Giulio Marchesini21Scientific Department, Velleja Research, Milano, 2Diseases of Metabolism, S Orsola Malpighi Hospital, Bologna, ItalyBackground: Suboptimal glycemic control is a common situation in diabetes, regardless of the wide range of drugs available to reach glycemic targets. Basic research in diabetes is endeavoring to identify new actives working as insulin savers, use of which could delay the introduction of injectable insulin or reduce the insulin dose needed. Commonly available as a nutraceutical, berberine is a potential candidate.Methods and results: Because its low oral bioavailability can be overcome by P-glycoprotein inhibitors like herbal polyphenols, we have tested the nutraceutical combination of Berberis aristata extract and Silybum marianum extract (Berberol® in type 2 diabetes in terms of its additive effect when combined with a conventional oral regimen for patients with suboptimal glycemic control. After 90 days of treatment, the nutraceutical association had a positive effect on glycemic and lipid parameters, significantly reducing glycosylated hemoglobin, basal insulin, homeostatic model assessment of insulin resistance, total and low-density lipoprotein cholesterol, and triglycerides. A relevant effect was also observed in terms of liver function by measuring aspartate transaminase and alanine transaminase. The product had a good safety profile, with distinctive gastrointestinal side effects likely due to its acarbose-like action.Conclusion: Although further studies should be carried out to confirm our data, Berberol could be considered a good candidate as an adjunctive treatment option in diabetes, especially in patients with suboptimal glycemic control.Keywords: berberine, silymarin, glycosylated hemoglobin, diabetes

  19. When do anterior external or internal fixators provide additional stability in an unstable (Tile C) pelvic fracture? A biomechanical study.

    Science.gov (United States)

    Mcdonald, E; Theologis, A A; Horst, P; Kandemir, U; Pekmezci, M

    2015-12-01

    This study aimed at evaluating the additional stability that is provided by anterior external and internal fixators in an unstable pelvic fracture model (OTA 61-C). An unstable pelvic fracture (OTA 61-C) was created in 27 synthetic pelves by making a 5-mm gap through the sacral foramina (posterior injury) and an ipsilateral pubic rami fracture (anterior injury). The posterior injury was fixed with either a single iliosacral (IS) screw, a single trans-iliac, trans-sacral (TS) screw, or two iliosacral screws (S1S2). Two anterior fixation techniques were utilized: external fixation (Ex-Fix) and supra-acetabular external fixation and internal fixation (In-Fix); supra-acetabular pedicle screws connected with a single subcutaneous spinal rod. The specimens were tested using a nondestructive single-leg stance model. Peak-to-peak (P2P) displacement and rotation and conditioning displacement (CD) were calculated. The Ex-Fix group failed in 83.3 % of specimens with concomitant single-level posterior fixation (Total: 15/18-7 of 9 IS fixation, 8 of 9 TS fixation), and 0 % (0/9) of specimens with concomitant two-level (S1S2) posterior fixation. All specimens with the In-Fix survived testing except for two specimens treated with In-Fix combined with IS fixation. Trans-sacral fixation had higher pubic rotation and greater sacral and pubic displacement than S1S2 (p < 0.05). Rotation of the pubis and sacrum was not different between In-Fix constructs combined with single-level IS and TS fixation. In this model of an unstable pelvic fracture (OTA 61-C), anterior fixation with an In-Fix was biomechanically superior to an anterior Ex-Fix in the setting of single-level posterior fixation. There was no biomechanical difference between the In-Fix and Ex-Fix when each was combined with two levels of posterior sacral fixation.

  20. Formation pathways of DMSO(2) in the addition channel of the OH-initiated DMS oxidation: A theoretical study.

    Science.gov (United States)

    Ramírez-Anguita, Juan M; González-Lafont, Angels; Lluch, José M

    2009-07-15

    The production of dimethyl sulfoxide (DMSO) and dimethyl sulfone (DMSO(2)) in the dimethyl sulfide (DMS) degradation scheme initiated by the hydroxyl (OH) radical has been shown to be very sensitive to nitrogen oxides (NO(x)) levels. In the present work we have explored the potential energy surfaces corresponding to several reaction pathways which yield DMSO(2) from the CH(3)S(O)(OH)CH(3) adduct [including the formation of CH(3)S(O)(OH)CH(3) from the reaction of DMSO with OH] and the reaction channels that yield DMSO or/and DMSO(2) from the CH(3)S(O(2))(OH)CH(3) adduct are also studied. The formation of the CH(3)S(O(2))(OH)CH(3) adduct from CH(3)S(OH)CH(3) (DMS-OH) and O(2) was analyzed in our previous work. All these pathways due to the presence of NO(x) (NO and NO(2)) and also due to the reactions with O(2), OH and HO(2) are compared with the objective of inferring their kinetic relevance in the laboratory experiments that measure DMSO(2) (and DMSO) formation yields. In particular, our theoretical results clearly show the existence of NO(x)-dependent pathways leading to the formation of DMSO(2), which could explain some of these experimental results in comparison with experimental measurements carried out in NO(x)-free conditions. Our results indicate that the relative importance of the addition channel in the DMS oxidation process can be dependent on the NO(x) content of chamber experiments and of atmospheric conditions. (c) 2008 Wiley Periodicals, Inc.

  1. The 2016 HIGh Heels: Health effects And psychosexual BenefITS (HIGH HABITS study: systematic review of reviews and additional primary studies

    Directory of Open Access Journals (Sweden)

    Max Barnish

    2017-08-01

    Full Text Available Abstract Background High-heeled shoes (high heels are frequently worn by many women and form an important part of female gender identity. Issues of explicit and implicit compulsion to wear high heels have been noted. Previous studies and reviews have provided evidence that high heels are detrimental to health. However, the evidence base remains fragmented and no review has covered both the epidemiological and biomechanical literature. In addition, no review has considered the psychosexual benefits that offer essential context in understanding the public health challenge of high heels. Methods We searched seven major bibliographic databases up to November 2016, in addition to supplementary searches. We initially identified all review articles of any design that assessed either the psychosexual benefits or negative musculoskeletal health effects of high heels, the latter looking at both the epidemiological and biomechanical perspectives. We additionally considered additional primary studies on areas that had not been reviewed before or in which a marked lack of evidence had been noted. Data were extracted onto standardised forms. Proportionate second review was conducted. Results A total of 506 unique records were identified, 27 full-text publications were screened and 20 publications (7 reviews and 13 additional studies were included in our evidence synthesis. The most up-to-date epidemiological review provides clear evidence of an association between high heel wear and hallux valgus, musculoskeletal pain and first-party injury. The body of biomechanical reviews provides clear evidence of changes indicative of increased risk of these outcomes, as well as osteoarthritis, which is not yet evidenced by epidemiological studies. There were no reviews on psychosexual benefits, but all five identified original studies provided evidence of increased attractiveness and/or an impact on men’s behaviour associated with high heel wear. With regard to second

  2. Amino-Acid Network Clique Analysis of Protein Mutation Non-Additive Effects: A Case Study of Lysozme

    Directory of Open Access Journals (Sweden)

    Dengming Ming

    2018-05-01

    Full Text Available Optimizing amino-acid mutations in enzyme design has been a very challenging task in modern bio-industrial applications. It is well known that many successful designs often hinge on extensive correlations among mutations at different sites within the enzyme, however, the underpinning mechanism for these correlations is far from clear. Here, we present a topology-based model to quantitively characterize non-additive effects between mutations. The method is based on the molecular dynamic simulations and the amino-acid network clique analysis. It examines if the two mutation sites of a double-site mutation fall into to a 3-clique structure, and associates such topological property of mutational site spatial distribution with mutation additivity features. We analyzed 13 dual mutations of T4 phage lysozyme and found that the clique-based model successfully distinguishes highly correlated or non-additive double-site mutations from those additive ones whose component mutations have less correlation. We also applied the model to protein Eglin c whose structural topology is significantly different from that of T4 phage lysozyme, and found that the model can, to some extension, still identify non-additive mutations from additive ones. Our calculations showed that mutation non-additive effects may heavily depend on a structural topology relationship between mutation sites, which can be quantitatively determined using amino-acid network k-cliques. We also showed that double-site mutation correlations can be significantly altered by exerting a third mutation, indicating that more detailed physicochemical interactions should be considered along with the network clique-based model for better understanding of this elusive mutation-correlation principle.

  3. A comparative study on electrochemical performances of the electrodes with different nanocarbon conductive additives for lithium ion batteries

    International Nuclear Information System (INIS)

    Chen, Taiqiang; Pan, Likun; Liu, Xinjuan; Sun, Zhuo

    2013-01-01

    Three nanocarbon materials (0 D acetylene black (AB), 1 D carbon nanotubes (CNTs) and 2 D reduced graphene oxide (RGO)) were used as conductive additives (CAs) in the mesocarbon microbead anodes for lithium ion batteries. The electrochemical performances of the electrodes were investigated. The results show that the CAs have a significant impact on the electrode performance because they can influence the electron conduction and lithium ion transportation within the electrode. The electrode with RGO achieves a maximum capacity of 387 mAh g −1 after 50 cycles at a current density of 50 mA g −1 , much higher than those of the electrodes with AB (334 mAh g −1 ) and CNTs (319 mAh g −1 ). The improvement should be mainly ascribed to the “plane-to-point” conducting network formed in the electrode with 2 D RGO which can favor the electron conduction and enhance the lithium ion transportation. - Highlights: • Three carbon materials were used as additives in the electrodes of Li ion battery. • The electrochemical performances of the electrodes were comparatively investigated. • The carbon additives have a significant impact on the electrode performance. • RGO additive acts as a bridge to form a “plane-to-point” conducting network. • The electrode with RGO exhibits better performance than those with other additives

  4. Studying the issues in the additive manufacturing of dental implants by Electron Beam MeltingRTM (EBM)

    Science.gov (United States)

    Jamshidinia, Mahdi

    The ability of additive manufacturing (AM) processes to produce complex geometries is resulting in their rapid acceptance by a number of industries. This unique capability could be used for the optimization of the design of functional components that could find an application in different industries such as aerospace, automotive, energy, medical, and implants. However, there are still some challenges confronting this technology such as surface finish, residual stress, dimensional tolerance, processing speed, and anisotropy in microstructure and mechanical properties. Any of the mentioned issues could be influenced by the thermal history of a 3D printed component during the layer-by-layer manufacturing. Therefore, an understanding of the thermal cycling during the AM process is essential. In recent years, significant advances have been achieved in the design, manufacturing, and materials used for dental implants. However, there are still some differences between the natural tooth and a dental implant that might decrease patient satisfaction. One of the differences between the natural tooth and a dental implant is in its modulus of elasticity, which could result in an issue known as bone atrophy. The second important difference between a dental implant and a natural tooth is the fact that a natural tooth is surrounded by a periodontal ligament that allows the tooth to move in three directions. However, the periodontal ligament is destroyed during the extraction of a natural tooth. In the absence of the periodontal ligament, the biting force is directly transferred to the jawbone, resulting in discomfort for the patient. Also, the implant cannot be incorporated with the surrounding natural tooth and form a bridge. In this study, the application of a lattice structure for the manufacturing of a biocompatible dental implant is investigated. Three different lattice structures with different unit cell sizes were experimentally and numerically analyzed. The mechanical

  5. Influence of additives (inorganic/organic on the clouding behavior of amphiphilic drug solutions: Some thermodynamic studies

    Directory of Open Access Journals (Sweden)

    Malik Abdul Rub

    2015-05-01

    Full Text Available Herein we provide a detailed result about the effect of various additives, viz. inorganic salts, quaternary ammonium bromides (QABs and amino acids on clouding behavior of amphiphilic drug amitriptyline hydrochloride (AMT. The continuous increase in the cloud point (CP of drug by increase in inorganic salt concentration and the magnitude of increases rely upon the position of the salts in Hofmeister series and hydrated radii. The QABs also influence continuous increase in the CP, which is illustrated in terms of the alkyl chain length of peculiar QAB. The effect of amino acids on CP of the drug solution is dependent upon the characteristics (acidic, basic, polar or nonpolar of particular amino acids. The overall behavior of additives has been analyzed and discussed on the basis of electrostatic repulsion or interaction, micellar growth, and mixed micelle formation between the ingredients. In addition to this, thermodynamic parameters are also evaluated.

  6. Methods to place a value on additional evidence are illustrated using a case study of corticosteroids after traumatic brain injury

    NARCIS (Netherlands)

    McKenna, Claire; Griffin, Susan; Koffijberg, Hendrik; Claxton, Karl

    2016-01-01

    OBJECTIVES: To establish whether evidence about the effectiveness of a health care intervention is sufficient to justify the use of the intervention in practice and show how value of information (VOI) analysis can be used to place a value on the need for additional evidence and inform research

  7. Improvement in engineering properties of soft-soil using cement and lime additives: A case study of southern Vietnam

    Science.gov (United States)

    To-Anh Phan, Vu; Ngoc-Anh Pham, Kha

    2018-04-01

    This paper presents the experimental results of using two additives to improve natural soft soil properties in southern Vietnam (i.g., cement and cement-lime mixture). The specimens were prepared by compacting method. Firstly, the natural soil was mixed with cement or cement-lime to determine the optimum water contents of various additive contents. Then, optimum water content was used to produce samples to test some engineering properties such as unconfined compressive strength, splitting tensile strength, and Young’s modulus. The specimens were tested by various curing duration of 7, 14, and 28 days. Results indicated that using cement additive is suitable for improvement of soft soil in the local area and cement-soil stabilization can be replaced as the subbase layer of the flexible pavement according to current Vietnamese standard. In addition, a higher cement content has a greater compressive strength as well as tensile strength. Besides, the Young’ modulus has significantly increased with a long-term curing age and more cement content. No evidences of increasing in strength and modulus are found with the cement-lime-soil stabilization. Finally, the best-fit power function is established by the relationships between unconfined compressive strength and splitting tensile strength as well unconfined compressive strength and Young’s Modulus, with the coefficient of determination, R2>0.999.

  8. Oxidative addition of the ethane C-C bond to Pd. An ab initio benchmark and DFT validation study

    NARCIS (Netherlands)

    De Jong, G.T.; Geerke, D.P.; Diefenbach, A.; Sola, M.; Bickelhaupt, F.M.

    2005-01-01

    We have computed a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the ethane C-C bond to the palladium atom and have used this to evaluate the performance of 24 popular density functionals, covering LDA, GGA, meta-GGA, and hybrid density

  9. Oxidative addition of the chloromethane C-Cl bond to Pd, an ab initio benchmark and DFT validation study

    NARCIS (Netherlands)

    de Jong, G.T.; Bickelhaupt, F.M.

    2006-01-01

    We have computed a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the chloromethane C-Cl bond to the palladium atom and have used this to evaluate the performance of 26 popular density functionals, covering LDA, GGA, meta-GGA, and hybrid density

  10. Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production

    DEFF Research Database (Denmark)

    Ullah, Raheem; Shah, Majid Ali; Tufail, Soban

    2016-01-01

    stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious...

  11. Study of corrosion behavior on the addition of sodium citrate in nickel electroplating on SPCC steel using EIS

    Science.gov (United States)

    Riastuti, R.; Ramadini, C.; Siallagan, S. T.; Rifki, A.; Herdino, F.

    2018-04-01

    The addition of sodium citrate to nickel electroplating process as additive is useful for refining the grain size of nickel deposit. The refining of grain size in nickel deposit as coating layer can improve surface performance, one of which corrosion resistance. This paper aims to investigate the effect of sodium citrate addition as grain refiner to promote corrosion resistance on SPCC steel. This experiment used Watt’s Bath solution of NiSO4 300 g/L, NiCl4 45 g/L, H3BO3 60 g/L, wetting agent 0.2 cc/L. Sodium citrate was added in composition of 45g/L and 60g/L. Nickel were deposited by direct current using current density on 6 A/dm2 at the acidity level of 5 for 30 minutes by keeping the operating temperature stable at 50°C. The grain size of nickel deposit was observed through Optical Microscope and Atomic Force Microscope (AFM). The corrosion behavior of SPCC was observed by linear polarization and Electrochemical Impedance Spectroscopy (EIS) methods using 3% NaCl solution. Based on the research, the addition of sodium citrate as grain refiner will increasing corrosion resistance on SPCC steel from 0.35 to 0.05 mm/year.

  12. The use of the operand-recognition paradigm for the study of mental addition in older adults.

    Science.gov (United States)

    Thevenot, Catherine; Castel, Caroline; Danjon, Juliette; Fanget, Muriel; Fayol, Michel

    2013-01-01

    Determining how individuals solve arithmetic problems is crucial for our understanding of human cognitive architecture. Elderly adults are supposed to use memory retrieval more often than younger ones. However, they might backup their retrieval by reconstructive strategies. In order to investigate this issue, we used the operand-recognition paradigm, which capitalizes on the fact that algorithmic procedures degrade the memory traces of the operands. Twenty-three older adults (M = 70.4) and 23 younger adults (M = 20.0) solved easy, difficult, and medium-difficulty addition and comparison problems and were then presented with a recognition task of the operands. When one-digit numbers with sums larger than 10 were involved (medium-difficulty problem), it was more difficult for younger adults to recognize the operands after addition than comparison. In contrast, in older adults, recognition times of the operands were the same after addition and comparison. Older adults, in contrast with younger adults, are able to retrieve the results of addition problems of medium difficulty. Contrary to what was suggested, older participants do not seem to resort to backup strategies for such problems. Finally, older adults' reliance on the more efficient retrieval strategy allowed them to catch up to younger adults in terms of solution times.

  13. Study of cyclic oxidation for stainless steels AISI 309 T 253 M A, with low additions of cerium

    International Nuclear Information System (INIS)

    Velazquez F, G.L.; Martinez, M.; Ruiz, A.

    1998-01-01

    It has been detected that the addition of small amounts (<1%) of the so called 'reactive elements' such as Cerium to Fe-Cr alloys that was utilized in oxidating environment at high temperatures improving its resistance to oxidation under isothermal and cyclic conditions. In this work, it was evaluated the behavior under cyclic oxidation conditions for an austenitic stainless steel at chromium-nickel (253MA) with cerium addition, and comparing it with the AISI 310S austenitic stainless steel. The cyclic oxidation essays consist of five cycles by 24 hours each one, following of a cooling in air until ambient temperature from the temperatures of 850, 900 and 950 Centigrade, registering the gain mass of the specimen at end of each cycle. In order to this were prepared samples with dimensions of 20 mm. x 10 mm. x 1 mm. Later to the oxidation essays was evaluated the morphology of the corrosion products layer by scanning electron microscopy. The present phases were identified by X-ray diffraction and by chemical microanalysis by Dispersive energy (EDAX). The results obtained show that the steel with cerium addition, presents a higher adherence and resistance to the spalling noting that the cerium promotes the casting anchor of the oxides layer to matrix and by reducing the grain size of the layer improving its plasticity. Additionally the cerium promotes the preferential oxidation of the forming elements of protective layers like the chromium. (Author)

  14. Transcutaneous Electrical Nerve Stimulation as an Additional Treatment for Women Suffering from Therapy-Resistant Provoked Vestibulodynia : A Feasibility Study

    NARCIS (Netherlands)

    Vallinga, Marleen S.; Spoelstra, Symen K.; Hemel, Inge L. M.; van de Wiel, Harry B. M.; Schultz, Willibrord C. M. Weijnnar

    IntroductionThe current approach to women with provoked vestibulodynia (PVD) comprises a multidimensional, multidisciplinary therapeutic protocol. As PVD is considered to be a chronic pain disorder, transcutaneous electrical nerve stimulation (TENS) can be used as an additional therapy for women

  15. Studying the effect of nano lead compounds additives on the concrete shielding properties for γ-rays

    International Nuclear Information System (INIS)

    Hassan, H.E.; Badran, H.M.; Aydarous, A.; Sharshar, T.

    2015-01-01

    In the present work the effect of concrete incorporation with two types of nano-lead compounds on its γ-ray shielding characteristics is investigated. The concrete samples were prepared according to the local standards of building materials and doped by different percentages of PbO and PbTiO_3 nano powders which were prepared using co-precipitation and oxalate precursor techniques, respectively. In addition, commercial PbO_2 powder additive was used to check the effect of particle size on concrete attenuation properties. The phase composition and particle size of all the lead-oxide additives were confirmed by XRD and TEM imaging. The γ-rays attenuation coefficients were measured as a function of the additive percentage of lead compounds for γ-ray energies of 662, 1173 and 1332 keV using "1"3"7Cs and "6"0Co sources. The microstructure changes occurred in the concrete samples doped with Pb compounds additives were probed using the positron annihilation spectroscopy (PAS) and the results were compared with that for normal concrete. The obtained data revealed that the overall defect density of the investigated samples, as seen by the positrons, decreases with increasing the nano-PbO contents which is in agreement with the determined values of the samples apparent densities. It was found that the γ-ray attenuation coefficient of concrete doped by nano-PbO is improved. The results are explained in the view of the fine structure enhanced modification and its impact on the γ-ray interaction probability at different energies.

  16. Numerical and experimental study of Ti6Al4V components manufactured using powder bed fusion additive manufacturing

    OpenAIRE

    Zielinski, J.; Mindt, H.-W.; Düchting, J.; Schleifenbaum, J.H.; Megahed, M.

    2017-01-01

    Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing t...

  17. A study of phase transformation in a TiAlNb alloy and the effect of Cr addition

    Energy Technology Data Exchange (ETDEWEB)

    Kesler, Michael S.; Goyel, Sonalika; Rios, Orlando [University of Florida, Materials Science and Engineering, P.O. Box 116400, Gainesville, FL 32611 (United States); Cupid, Damian M. [University of Florida, Materials Science and Engineering, P.O. Box 116400, Gainesville, FL 32611 (United States); Freiberg University of Mining and Technology, Institute of Materials Science, Freiberg (Germany); Seifert, Hans J. [Freiberg University of Mining and Technology, Institute of Materials Science, Freiberg (Germany); Ebrahimi, Fereshteh, E-mail: febra@mse.ufl.edu [University of Florida, Materials Science and Engineering, P.O. Box 116400, Gainesville, FL 32611 (United States)

    2010-05-15

    The phase transformation paths, transformation temperatures and phase equilibria of Ti-45Al-27Nb and Ti-45Al-22Nb-5Cr (at%) alloys were evaluated over a temperature range from 865 deg. C to 1600 deg. C. Both alloys solidified as single {beta}-phase and transformed to {gamma} + {sigma} phases upon slow cooling. The addition of Cr did not affect the {beta} {yields} {gamma} transformation temperature upon slow cooling. In contrast, the temperature, at which the {sigma}-phase formed, was reduced noticeably. Upon heating, the temperature at which the {beta}-phase evolves from the {gamma} + {sigma} microstructure was found to decrease significantly with the addition of Cr. In the ternary alloy the formation of the {gamma}-phase could not be retarded on quenching, however, the substitution of Nb with Cr allowed for the retainment of the {beta}-phase to room temperature. These results are explained by the partitioning of Cr into the {beta}-phase, which in addition to thermodynamic stability reduces the kinetics of transformations at lower temperatures.

  18. A study of phase transformation in a TiAlNb alloy and the effect of Cr addition

    Energy Technology Data Exchange (ETDEWEB)

    Kesler, Michael [University of Florida, Gainesville; Goyel, Sonalika [University of Florida, Gainesville; Rios, Orlando [ORNL; Cupid, Damian M [Freiberg University of Mining and Technology; Seifert, Hans J [Freiberg University of Mining and Technology; Ebrahimi, Fereshteh [University of Florida, Gainesville

    2010-01-01

    The phase transformation paths, transformation temperatures and phase equilibria of Ti-45Al-27Nb and Ti-45Al-22Nb-5Cr (at%) alloys were evaluated over a temperature range from 865 C to 1600 C. Both alloys solidified as single {beta}-phase and transformed to {gamma} + {sigma} phases upon slow cooling. The addition of Cr did not affect the {beta} {yields} {gamma} transformation temperature upon slow cooling. In contrast, the temperature, at which the {sigma}-phase formed, was reduced noticeably. Upon heating, the temperature at which the {beta}-phase evolves from the {gamma} + {sigma} microstructure was found to decrease significantly with the addition of Cr. In the ternary alloy the formation of the {gamma}-phase could not be retarded on quenching, however, the substitution of Nb with Cr allowed for the retainment of the {beta}-phase to room temperature. These results are explained by the partitioning of Cr into the {beta}-phase, which in addition to thermodynamic stability reduces the kinetics of transformations at lower temperatures.

  19. A study of phase transformation in a TiAlNb alloy and the effect of Cr addition

    International Nuclear Information System (INIS)

    Kesler, Michael S.; Goyel, Sonalika; Rios, Orlando; Cupid, Damian M.; Seifert, Hans J.; Ebrahimi, Fereshteh

    2010-01-01

    The phase transformation paths, transformation temperatures and phase equilibria of Ti-45Al-27Nb and Ti-45Al-22Nb-5Cr (at%) alloys were evaluated over a temperature range from 865 deg. C to 1600 deg. C. Both alloys solidified as single β-phase and transformed to γ + σ phases upon slow cooling. The addition of Cr did not affect the β → γ transformation temperature upon slow cooling. In contrast, the temperature, at which the σ-phase formed, was reduced noticeably. Upon heating, the temperature at which the β-phase evolves from the γ + σ microstructure was found to decrease significantly with the addition of Cr. In the ternary alloy the formation of the γ-phase could not be retarded on quenching, however, the substitution of Nb with Cr allowed for the retainment of the β-phase to room temperature. These results are explained by the partitioning of Cr into the β-phase, which in addition to thermodynamic stability reduces the kinetics of transformations at lower temperatures.

  20. Numerical study of water entry supercavitating flow around a vertical circular cylinder influenced by turbulent drag-reducing additives

    International Nuclear Information System (INIS)

    Jiang, C X; Cheng, J P; Li, F C

    2015-01-01

    This paper attempts to introduce a numerical simulation procedure to simulate water-entry problems influenced by turbulent drag-reducing additives in a viscous incompressible medium. Firstly we performed a numerical investigation on water-entry supercavities in water and turbulent drag-reducing solution at the impact velocity of 28.4 m/s to confirm the accuracy of the numerical method. Based on the verification, projectile entering water and turbulent drag-reducing solution at relatively high velocity of 142.7 m/s (phase transition is considered) is simulated. The cross viscosity equation was adopted to represent the shear-thinning characteristic of aqueous solution of drag-reducing additives. The configuration and dynamic characteristics of water entry supercavity, flow resistance were discussed respectively. It was obtained that the numerical simulation results are in consistence with experimental data. Numerical results show that the supercavity length in drag-reducing solution is larger than one in water and the velocity attenuates faster at high velocity than at low velocity; the influence of drag-reducing solution is more obvious at high impact velocity. Turbulent drag-reducing additives have the great potential for enhancement of supercavity

  1. Cancer patients treated with sunitinib or sorafenib have sufficient antibody and cellular immune responses to warrant influenza vaccination

    NARCIS (Netherlands)

    Mulder, Sasja F.; Jacobs, Joannes F. M.; Olde Nordkamp, Michel A. M.; Galama, Joep M. D.; Desar, Ingrid M. E.; Torensma, Ruurd; Teerenstra, Steven; Mulders, Peter F. A.; Vissers, Kris C. P.; Punt, Cornelis J. A.; de Vries, I. Jolanda M.; van Herpen, Carla M. L.

    2011-01-01

    The tyrosine kinase inhibitors sorafenib and sunitinib have efficacy in several types of cancer. Recent studies indicate that these agents affect the immune system. The way it affects the immune response to influenza vaccination is unknown. The aim of this study was to elucidate the specific immune

  2. Cancer patients treated with sunitinib or sorafenib have sufficient antibody and cellular immune responses to warrant influenza vaccination

    NARCIS (Netherlands)

    Mulder, S.F.; Jacobs, J.F.M.; Olde Nordkamp, M.A.M.; Galama, J.M.D.; Desar, I.M.E.; Torensma, R.; Teerenstra, S.; Mulders, P.F.; Vissers, K.C.P.; Punt, C.J.A.; Vries, I.J.M. de; Herpen, C.M.L. van

    2011-01-01

    PURPOSE: The tyrosine kinase inhibitors sorafenib and sunitinib have efficacy in several types of cancer. Recent studies indicate that these agents affect the immune system. The way it affects the immune response to influenza vaccination is unknown. The aim of this study was to elucidate the

  3. Synthesis and tribological studies of nanoparticle additives for pyrolysis bio-oil formulated as a diesel fuel

    International Nuclear Information System (INIS)

    Xu, Yufu; Peng, Yubin; Zheng, Xiaojing; Dearn, Karl D.; Xu, Hongming; Hu, Xianguo

    2015-01-01

    The tribological behaviour of pyrolysis bio-oil with a synthesized nano-Lanthanum oxide (La 2 O 3 ) additive was evaluated using a point contact four ball tribometer under different frictional conditions. Results were compared against a micro (μ)-La 2 O 3 additive and an un-additised bio-oil as a control. The results show that nano-La 2 O 3 impregnated bio-oil had better tribological properties than the control groups. Under the operating loads, the optimum nanoparticle concentration within the bio-oil was investigated. At these levels, the combined action of adsorbed bio-oil films on the worn surfaces and the bearing effects of the nano-La 2 O 3 minimized friction and wear. The tribo-mechanisms were ascribed to adhesive wear as a result of lubrication starvation under high loads, and abrasive wear at high rotational speeds as a result of combined deformation and aggregation of the nano-La 2 O 3 particles. - Highlights: • The tribological properties of pyrolysis bio-oil with (μ & n) La 2 O 3 were assessed. • Nano-La 2 O 3 was synthesized with diameters of approximately 20–1000 nm. • Bio-oil w. 1% nano-La 2 O 3 was the optimum additive & concentration for tribological properties. • 1% nano-La 2 O 3 reduced corrosive wear with stable lubrication film for test conditions. • Wear mechanisms were predominately adhesive for higher loads and abrasive for higher speeds

  4. Hanford waste-form release and sediment interaction: A status report with rationale and recommendations for additional studies

    International Nuclear Information System (INIS)

    Serne, R.J.; Wood, M.I.

    1990-05-01

    This report documents the currently available geochemical data base for release and retardation for actual Hanford Site materials (wastes and/or sediments). The report also recommends specific laboratory tests and presents the rationale for the recommendations. The purpose of this document is threefold: to summarize currently available information, to provide a strategy for generating additional data, and to provide recommendations on specific data collection methods and tests matrices. This report outlines a data collection approach that relies on feedback from performance analyses to ascertain when adequate data have been collected. The data collection scheme emphasizes laboratory testing based on empiricism. 196 refs., 4 figs., 36 tabs

  5. Contribution to the study of remedy solutions to uranium(molybdenum)/aluminium interactions: role of silicon addition to aluminium, study of coupled effects

    International Nuclear Information System (INIS)

    Allenou, J.

    2011-01-01

    In the project development and qualification program of a nuclear fuel with Low Enriched Uranium for Materials Testing Reactors, the dispersed U(Mo)/Al fuel is being developed due to its excellent stability during irradiation. However, in pile experiments showed that depending on the irradiation conditions (e.g. high burnup or high heat flux), an extensive interaction occurs between the fissile element U(Mo) and the Al based matrix resulting in swelling, which could eventually lead to a fuel plate failure. Among the ways to improve the behavior of the dispersed U(Mo) fuel, the solution now seen as the reference remedy by the entire scientific community is the addition of silicon into the aluminum matrix. In order to provide some understanding and optimizing the solution 'Si additions into Al matrix' under neutron irradiation, an out of pile study is performed on (i) the interaction mechanisms involved in the U(Mo)/Al (Si) system and (ii) the impact of the Si additions into the Al matrix on alternative solutions to the U(Mo)/Al interactions, namely the modification of the γ-U(Mo) fissile compound by adding a third element and/or modifying the interface between the γ-U(Mo) fissile compound and the matrix. This document provides a mechanistic description of the U(7Mo)/Al(Si) interaction for a range of Si content in Al between 2 and 10 wt.%, based on the multi-scale characterization of diffusion couples. The location of the Mo and its role in the reaction mechanisms are demonstrated. The influence of elements X = Y, Cu, Zr, Ti, Cr, on the U (Mo)/Al and U (Mo)/Al (Si) interactions mechanisms was then studied. It is shown that adding a third element to the U(Mo) alloy acts on the second order on diffusion kinetics and (micro)structure of the interaction layer compared to the addition of Si into Al. Finally, an alumina coating which shows a potential interest to improve the performance of the fuel has been developed. (author) [fr

  6. Some Studies of the Effects of Additives on Cigarette Mainstream Smoke Properties. II. Casing Materials and Humectants

    Directory of Open Access Journals (Sweden)

    Rodgman A

    2014-12-01

    Full Text Available Examination of extensive laboratory data collected during the past four decades, particularly those unpublished data generated in the 1950s and 1960s, indicates that none of the materials used as casing materials (sugars, licorice, cocoa and humectants (glycerol, propylene glycol, other glycols on smoking tobacco products, particularly cigarettes, imparts any significant adverse chemical or biological properties to the mainstream smoke (MSS from cased and humectant-treated tobacco, a conclusion reached by Doull et al. (1 in their assessment of available information on nearly 600 flavorant, casing material, and humectant ingredients variously used as cigarette tobacco additives in the U.S. Tobacco Industry. Addition of casing materials and humectants to the cigarette tobacco blend produced no significant increase in the cigarette MSS of either the total polycyclic aromatic hydrocarbon (PAH or the benzo[a]pyrene (B[a]P content, MSS components that have been of considerable interest for many years. Examination of the transfer of humectants from the humectant-treated tobacco to cigarette MSS indicates that the humectants act as significant diluents to the remaining MSS particulate-phase components generated from the tobacco during the smoking process. This dilution decreases the effects observed in several bioassays, e.g., mutagenicity determined in the Ames Salmonella typhimurium test.

  7. Influence of polymer additives on turbulent energy cascading in forced homogeneous isotropic turbulence studied by direct numerical simulations

    International Nuclear Information System (INIS)

    Li Feng-Chen; Cai Wei-Hua; Zhang Hong-Na; Wang Yue

    2012-01-01

    Direct numerical simulations (DNS) were performed for the forced homogeneous isotropic turbulence (FHIT) with/without polymer additives in order to elaborate the characteristics of the turbulent energy cascading influenced by drag-reducing effects. The finite elastic non-linear extensibility-Peterlin model (FENE-P) was used as the conformation tensor equation for the viscoelastic polymer solution. Detailed analyses of DNS data were carried out in this paper for the turbulence scaling law and the topological dynamics of FHIT as well as the important turbulent parameters, including turbulent kinetic energy spectra, enstrophy and strain, velocity structure function, small-scale intermittency, etc. A natural and straightforward definition for the drag reduction rate was also proposed for the drag-reducing FHIT based on the decrease degree of the turbulent kinetic energy. It was found that the turbulent energy cascading in the FHIT was greatly modified by the drag-reducing polymer additives. The enstrophy and the strain fields in the FHIT of the polymer solution were remarkably weakened as compared with their Newtonian counterparts. The small-scale vortices and the small-scale intermittency were all inhibited by the viscoelastic effects in the FHIT of the polymer solution. However, the scaling law in a fashion of extended self-similarity for the FHIT of the polymer solution, within the presently simulated range of Weissenberg numbers, had no distinct differences compared with that of the Newtonian fluid case

  8. Measures of 'exposure needed for one additional patient to be harmed' in population-based case-control studies

    DEFF Research Database (Denmark)

    Hallas, J.; Christensen, R. D.; Sturmer, T.

    2014-01-01

    Purpose The magnitude of risk for adverse drug reactions may be communicated by a measure of 'exposure needed for one additional patient to be harmed' (ENH). We present four ENH measures, based on four different counterfactual contrasts, as illustrated by the known effects of NSAID use on peptic ...... bleeding. The ultimate choice of ENH measure will depend on epidemiological or clinical considerations and on availability of data. Copyright (C) 2014 John Wiley & Sons, Ltd.......Purpose The magnitude of risk for adverse drug reactions may be communicated by a measure of 'exposure needed for one additional patient to be harmed' (ENH). We present four ENH measures, based on four different counterfactual contrasts, as illustrated by the known effects of NSAID use on peptic...... ulcer bleeding. Methods The four measures were basic ENH (estimating the excess risk when treating the entire source population versus treating no one), age-restricted ENH (the entire source population above, e. g. 50 years old treated versus no one above 50 years old treated), standardised ENH (a...

  9. A study of Sn addition on bonding arrangement of Se-Te alloys using far infrared transmission spectroscopy

    International Nuclear Information System (INIS)

    Kumar, Rajneesh; Rangra, V. S.; Sharma, Parikshit; Katyal, S. C.; Sharma, Pankaj

    2011-01-01

    Far infrared transmission spectra of Se 92 Te 8-x Sn x (x = 0, 1, 2, 3, 4, 5) glassy alloys are obtained in the spectral range 50-600 cm -1 at room temperature. The results are interpreted in terms of the vibrations of the isolated molecular units in such a way so as to preserve fourfold and twofold coordination for Sn and chalcogen atoms (Se,Te), respectively. With the addition of Sn, Far-IR spectra shift toward high frequency side and some new bands start appearing. Sn atoms appear to substitute for the selenium atoms in the outrigger sites due to large bond formation probability. Theoretical calculations of bond energy, relative probability of bond formation, force constant, and wave number were also made to justify the result.

  10. Are lifestyle changes achieved after participation in a screening programme for Type 2 diabetes? The ADDITION Study, Denmark

    DEFF Research Database (Denmark)

    Mai, K S; Sandbaek, A; Borch-Johnsen, K

    2007-01-01

    . The screening comprised two main steps: identification of high-risk individuals by a mailed risk score questionnaire, and subsequent testing of high-risk individuals by their general practitioner. Questionnaires on physical exercise [International Physical Activity Questionnaire (IPAQ), short form], smoking...... habits and alcohol consumption were mailed to the target population 1 month prior to the offer of screening, and at 12 months' follow-up. At follow-up, additional questions regarding perceived changes in dietary habits, smoking, alcohol consumption and exercise were included. Three pairs of comparison...... groups were analysed. RESULTS: One year after screening, smokers who underwent further testing reduced smoking by one daily cigarette more than people at low risk of diabetes. The rate of smokers was not reduced, and the result was not confirmed by data regarding perceived change. Alcohol intake...

  11. Addition of milk to tea infusions: Helpful or harmful? Evidence from in vitro and in vivo studies on antioxidant properties.

    Science.gov (United States)

    Rashidinejad, Ali; Birch, E John; Sun-Waterhouse, Dongxiao; Everett, David W

    2017-10-13

    Tea consumption is practised as a tradition, and has shown potential to improve human health. Maximal uptake of tea antioxidants and milk proteins without a negative impact on tea flavor is highly desired by consumers. There is a conflicting evidence of the effect of milk addition to tea on antioxidant activity. Differences in the type of tea, the composition, type and amount of milk, preparation method of tea-milk infusions, the assays used to measure antioxidant activity, and sampling size likely account for different findings. Interactions between tea polyphenols and milk proteins, especially between catechins and caseins, could account for a decrease in antioxidant activity, although other mechanisms are also possible, given the similar effects between soy and bovine milk. The role of milk fat globules and the milk fat globule membrane surface is also important when considering interactions and loss of polyphenolic antioxidant activity, which has not been addressed in the literature.

  12. Stability of Proteins in Carbohydrates and Other Additives during Freezing: The Human Growth Hormone as a Case Study.

    Science.gov (United States)

    Arsiccio, Andrea; Pisano, Roberto

    2017-09-21

    Molecular dynamics is here used to elucidate the mechanism of protein stabilization by carbohydrates and other additives during freezing. More specifically, we used molecular dynamics simulations to obtain a quantitative estimation of the capability of various cryoprotectants to preserve a model protein, the human growth hormone, against freezing stresses. Three mechanisms were investigated, preferential exclusion, water replacement, and vitrification. Model simulations were finally validated upon experimental data in terms of the ability of excipients to prevent protein aggregation. Overall, we found that the preferential exclusion and vitrification mechanisms are important during the whole freezing process, while water replacement becomes dominant only toward the end of the cryoconcentration phase. The disaccharides were found to be the most efficient excipients, in regard to both preferential exclusion and water replacement. Moreover, sugars were in general more efficient than other excipients, such as glycine or sorbitol.

  13. Meta-analysis of high-latitude nitrogen-addition and warming studies implies ecological mechanisms overlooked by land models

    Science.gov (United States)

    Bouskill, N. J.; Riley, W. J.; Tang, J. Y.

    2014-12-01

    Accurate representation of ecosystem processes in land models is crucial for reducing predictive uncertainty in energy and greenhouse gas feedbacks with the climate. Here we describe an observational and modeling meta-analysis approach to benchmark land models, and apply the method to the land model CLM4.5 with two versions of belowground biogeochemistry. We focused our analysis on the aboveground and belowground responses to warming and nitrogen addition in high-latitude ecosystems, and identified absent or poorly parameterized mechanisms in CLM4.5. While the two model versions predicted similar soil carbon stock trajectories following both warming and nitrogen addition, other predicted variables (e.g., belowground respiration) differed from observations in both magnitude and direction, indicating that CLM4.5 has inadequate underlying mechanisms for representing high-latitude ecosystems. On the basis of observational synthesis, we attribute the model-observation differences to missing representations of microbial dynamics, aboveground and belowground coupling, and nutrient cycling, and we use the observational meta-analysis to discuss potential approaches to improving the current models. However, we also urge caution concerning the selection of data sets and experiments for meta-analysis. For example, the concentrations of nitrogen applied in the synthesized field experiments (average = 72 kg ha-1 yr-1) are many times higher than projected soil nitrogen concentrations (from nitrogen deposition and release during mineralization), which precludes a rigorous evaluation of the model responses to likely nitrogen perturbations. Overall, we demonstrate that elucidating ecological mechanisms via meta-analysis can identify deficiencies in ecosystem models and empirical experiments.

  14. RNOP-09: Pegylated liposomal doxorubicine and prolonged temozolomide in addition to radiotherapy in newly diagnosed glioblastoma - a phase II study

    Directory of Open Access Journals (Sweden)

    Proescholdt Martin

    2009-09-01

    Full Text Available Abstract Background Although Temozolomide is effective against glioblastoma, the prognosis remains dismal and new regimens with synergistic activity are sought for. Methods In this phase-I/II trial, pegylated liposomal doxorubicin (Caelyx™, PEG-Dox and prolonged administration of Temozolomide in addition to radiotherapy was investigated in 63 patients with newly diagnosed glioblastoma. In phase-I, PEG-Dox was administered in a 3-by-3 dose-escalation regimen. In phase-II, 20 mg/m2 PEG-Dox was given once prior to radiotherapy and on days 1 and 15 of each 28-day cycle starting 4 weeks after radiotherapy. Temozolomide was given in a dose of 75 mg/m2 daily during radiotherapy (60 Gy and 150-200 mg/m2 on days 1-5 of each 28-day cycle for 12 cycles or until disease progression. Results The toxicity of the combination of PEG-Dox, prolonged administration of Temozolomide, and radiotherapy was tolerable. The progression free survival after 12 months (PFS-12 was 30.2%, the median overall survival was 17.6 months in all patients including the ones from Phase-I. None of the endpoints differed significantly from the EORTC26981/NCIC-CE.3 data in a post-hoc statistical comparison. Conclusion Together, the investigated combination is tolerable and feasible. Neither the addition of PEG-Dox nor the prolonged administration of Temozolomide resulted in a meaningful improvement of the patient's outcome as compared to the EORTC26981/NCIC-CE.3 data Trial registration clinicaltrials.gov NCT00944801.

  15. RNOP-09: Pegylated liposomal doxorubicine and prolonged temozolomide in addition to radiotherapy in newly diagnosed glioblastoma - a phase II study

    International Nuclear Information System (INIS)

    Beier, Christoph P; Dietmaier, Christopher; Jauch-Worley, Tanja; Kölbl, Oliver; Pietsch, Torsten; Proescholdt, Martin; Rümmele, Petra; Muigg, Armin; Stockhammer, Günther; Hegi, Monika; Bogdahn, Ulrich; Schmid, Christina; Hau, Peter; Gorlia, Thierry; Kleinletzenberger, Christine; Beier, Dagmar; Grauer, Oliver; Steinbrecher, Andreas; Hirschmann, Birgit; Brawanski, Alexander

    2009-01-01

    Although Temozolomide is effective against glioblastoma, the prognosis remains dismal and new regimens with synergistic activity are sought for. In this phase-I/II trial, pegylated liposomal doxorubicin (Caelyx™, PEG-Dox) and prolonged administration of Temozolomide in addition to radiotherapy was investigated in 63 patients with newly diagnosed glioblastoma. In phase-I, PEG-Dox was administered in a 3-by-3 dose-escalation regimen. In phase-II, 20 mg/m 2 PEG-Dox was given once prior to radiotherapy and on days 1 and 15 of each 28-day cycle starting 4 weeks after radiotherapy. Temozolomide was given in a dose of 75 mg/m 2 daily during radiotherapy (60 Gy) and 150-200 mg/m 2 on days 1-5 of each 28-day cycle for 12 cycles or until disease progression. The toxicity of the combination of PEG-Dox, prolonged administration of Temozolomide, and radiotherapy was tolerable. The progression free survival after 12 months (PFS-12) was 30.2%, the median overall survival was 17.6 months in all patients including the ones from Phase-I. None of the endpoints differed significantly from the EORTC26981/NCIC-CE.3 data in a post-hoc statistical comparison. Together, the investigated combination is tolerable and feasible. Neither the addition of PEG-Dox nor the prolonged administration of Temozolomide resulted in a meaningful improvement of the patient's outcome as compared to the EORTC26981/NCIC-CE.3 data clinicaltrials.gov NCT00944801

  16. Viability Study of a Safe Method for Health to Prepare Cement Pastes with Simultaneous Nanometric Functional Additions

    Directory of Open Access Journals (Sweden)

    M. A. de la Rubia

    2018-01-01

    Full Text Available The use of a mixing method based on a novel dry dispersion procedure that enables a proper mixing of simultaneous nanometric functional additions while avoiding the health risks derived from the exposure to nanoparticles is reported and compared with a common manual mixing in this work. Such a dry dispersion method allows a greater workability by avoiding problems associated with the dispersion of the particles. The two mixing methods have been used to prepare Portland cement CEM I 52.5R pastes with additions of nano-ZnO with bactericide properties and micro- or nanopozzolanic SiO2. The hydration process performed by both mixing methods is compared in order to determine the efficiency of using the method. The hydration analysis of these cement pastes is carried out at different ages (from one to twenty-eight days by means of differential thermal analysis and thermogravimetry (DTA-TG, X-ray diffraction (XRD, scanning electron microscopy (SEM, and Fourier transform infrared spectroscopy (FTIR analyses. Regardless of composition, all the mixtures of cement pastes obtained by the novel dispersion method showed a higher retardation of cement hydration at intermediate ages which did not occur at higher ages. In agreement with the resulting hydration behaviour, the use of this new dispersion method makes it possible to prepare homogeneous cement pastes with simultaneous functional nanoparticles which are physically supported on the larger particles of cement, avoiding exposure to the nanoparticles and therefore minimizing health risks. Manual mixing of cement-based materials with simultaneous nanometric functional nanoparticles on a large scale would make it difficult to obtain a homogenous material together with the health risks derived from the handling of nanoparticles.

  17. What level of concern is warranted with respect to release of production waters on the Grand Banks of Newfoundland?

    International Nuclear Information System (INIS)

    Andrews, C.; Payne, J.; Guiney, J.; Lee, K.

    2009-01-01

    The Terra Nova, Hibernia, White Rose and Hebron offshore fields are situated in an important fishing area at the edge of the Grand Banks of Newfoundland. The offshore oil and gas industry must consider its potential effects on fisheries and the environment. This presentation discussed the potential scale and nature of any impacts at individual development sites. Most information from field and laboratory studies suggests that offshore impacts will likely be minimal with little potential for any impacts beyond individual rig sites. Fishery closure zones around rigs could occasionally act as nursery areas or marine protected areas. The authors noted that such general statements should be approached with caution given that some uncertainties remain about the effects of oil development, including the potential for chronic effects of produced water on fish and other biota. The presentation reviewed recent laboratory and field studies carried out under the Program of Energy Research and Development (PERD) to 2008. Industry Environmental Effects Management (EEM) programs in the Grand Banks are presently geared towards providing early warning of any impacts on fish health, fish quality, sediment toxicity, and primary productivity. EEM programs also help reveal new insights which are not possible through laboratory studies.

  18. A comparative study on different burning method of sewage sludge ash in mortar brick with eggshell powder as additive

    Science.gov (United States)

    Ing, Doh Shu; Azed, Muhammad Aizat; Chin, Siew Choo

    2017-11-01

    Population growth that increase every year has led to the increasing amount of waste generated annually. The content of heavy metal Cadmium (Cd), Lead (Pb) and Zinc (Zn) represent the biggest concentrations of heavy metals in sewage sludge waste which can be the source of pollution. Furthermore, the excessive disposal of eggshells waste to landfills may attract rats and worms due to the organic protein matrix that may pose health problem to the public. In the last decade, the demand on cement mortar brick has increased has resulted in higher cement production. However, cement plant is one of the major contributors of carbon dioxide emission. Hence, this research focuses on the production of environmental friendly cement with sewage sludge since there is occurrence of pozolonic material in Sewage Sludge Ash (SSA). From the initial finding, the major components of SSA are Silicon Dioxide (SiO2), Calcium oxide (CaO), Aluminium Oxide (Al2O3), Iron (III) Oxide (Fe2O3), Sodium Oxide (Na2O), Potassium oxide (K2O), Magnesium Oxide (MgO) and Iron (II) Oxide (FeO). Sewage sludge needed to be incinerated to remove the heavy metal before it can be used as cement replacement in mortar brick production. The sewage sludge were treated using two methods namely incineration and microwave. Both types of sewage sludge were then added with eggshell powder as additive. Eggshell powder act as additive in this research due to its high content of calcium carbonate and has nearly same composition of limestone used in the production of cement. Different percentages of Eggshell Powder (ESP) (0%, 5%, 10%, 15%) and 10% fixed of Microwaved Sewage Sludge Ash (MSSA) and Incinerated Sewage Sludge Ash (ISSA) as optimum dosage partially replacing the cement used to test the brick mortar properties in term of compressive strength, flexural strength and also water absorption. Result showed that ISSA with 5% of ESP is the most optimum brick with highest compressive strength and flexural strength

  19. Cancer patients treated with sunitinib or sorafenib have sufficient antibody and cellular immune responses to warrant influenza vaccination.

    Science.gov (United States)

    Mulder, Sasja F; Jacobs, Joannes F M; Olde Nordkamp, Michel A M; Galama, Joep M D; Desar, Ingrid M E; Torensma, Ruurd; Teerenstra, Steven; Mulders, Peter F A; Vissers, Kris C P; Punt, Cornelis J A; de Vries, I Jolanda M; van Herpen, Carla M L

    2011-07-01

    The tyrosine kinase inhibitors sorafenib and sunitinib have efficacy in several types of cancer. Recent studies indicate that these agents affect the immune system. The way it affects the immune response to influenza vaccination is unknown. The aim of this study was to elucidate the specific immune response to seasonal flu vaccination in cancer patients treated with sunitinib or sorafenib. Sunitinib- or sorafenib-treated cancer patients were vaccinated against seasonal influenza with an inactivated vaccine. Healthy controls and patients with metastatic renal cell cancer (mRCC) without systemic treatment (nontreated mRCC controls) were included for comparison. Antibody responses were measured at baseline, day 8, and day 22 by a standard hemagglutination inhibition assay and cellular T-cell responses at baseline and day 8 by proliferation assay and secretion of cytokines. Forty subjects were enrolled: 16 patients treated with sunitinib, 6 patients with sorafenib, 7 nontreated mRCC controls, and 11 healthy controls. All patients treated with sunitinib and sorafenib developed seroprotection rates comparable with controls. Functional T-cell reactivity was observed in all groups, except for patients treated with sorafenib who showed a decreased proliferation rate and IFN-γ/IL-2 production and increased IL-10 compared with healthy controls. We conclude that influenza vaccination should be recommended to cancer patients treated with sunitinib or sorafenib.

  20. Tuning crystalline ordering by annealing and additives to study its effect on exciton diffusion in a polyalkylthiophene copolymer.

    Science.gov (United States)

    Chowdhury, Mithun; Sajjad, Muhammad T; Savikhin, Victoria; Hergué, Noémie; Sutija, Karina B; Oosterhout, Stefan D; Toney, Michael F; Dubois, Philippe; Ruseckas, Arvydas; Samuel, Ifor D W

    2017-05-17

    The influence of various processing conditions on the singlet exciton diffusion is explored in films of a conjugated random copolymer poly-(3-hexylthiophene-co-3-dodecylthiophene) (P3HT-co-P3DDT) and correlated with the degree of crystallinity probed by grazing incidence X-ray scattering and with exciton bandwidth determined from absorption spectra. The exciton diffusion coefficient is deduced from exciton-exciton annihilation measurements and is found to increase by more than a factor of three when thin films are annealed using CS 2 solvent vapour. A doubling of exciton diffusion coefficient is observed upon melt annealing at 200 °C and the corresponding films show about 50% enhancement in the degree of crystallinity. In contrast, films fabricated from polymer solutions containing a small amount of either solvent additive or nucleating agent show a decrease in exciton diffusion coefficient possibly due to formation of traps for excitons. Our results suggest that the enhancement of exciton diffusivity occurs because of increased crystallinity of alkyl-stacking and longer conjugation of aggregated chains which reduces the exciton bandwidth.

  1. Perancangan Sistem Pendukung Keputusan Seleksi Penerimaan Karyawan Dengan Metode Simple Additive Weighting (SAW (Studi Kasus Toko Markas Hobby

    Directory of Open Access Journals (Sweden)

    Dadi Rosadi

    2017-06-01

    Full Text Available Selection process for new employees at the Markas Hobby is still done manually, the application file new candidates will be evaluated by comparing the file contents with the specified criteria. Selection of the files that meet the criteria then continued with the interview process. The series of processes followed by a series written the tests, including psychological tests, tests of academic potential and so on. Statements this thesis aims to build a Decision Support System Selection Recruitment of new uses Simple Additive weighting method (SAW. This method was chosen because it can determine the weight values for each attribute, and then proceed with the ranking process that will select the best alternative from several alternatives, In this case, the alternative is entitled to be accepted as a new employee in accordance with criteria specified. In developing this application writer use the method of RUP (Rational Unified Process, with Descriptive Research Methodology and Action Research Methodology. While the system implementation using PHP programming language and MySQL as the database. The decision support system may help section Recruitment in making decisions for the recruitment process at Markas Hobby more easily and quickly.

  2. Preoperative irradiation and surgery for recurrent rectal cancer. Will intraoperative radiotherapy (IORT) be of additional benefit? A prospective study

    International Nuclear Information System (INIS)

    Wiig, Johan Nicolay; Tveit, Kjell Magne; Poulsen, Jan Peter; Olsen, Dag Rune; Giercksky, Karl-Erik

    2002-01-01

    Background: The therapeutic gain of surgery for recurrent rectal cancer is not clear, particularly with regard to the addition of intraoperative radiotherapy (IORT). Methods: Patients (107) with isolated pelvic recurrence of rectal cancer received preoperative external radiotherapy of 46-50 in 2 Gy fractions. At surgery 59 patients had IORT 12-18 Gy. Survival and local recurrence was analysed with regard to surgical resection stages and IORT. Results: Patients (44) had R0- and 39 R1-resections, 24 R2-resections or exploratory laparotomy. IORT was given most often after R1-resections, least in R0-patients. Estimated 5-year survival was overall around 30%, around 60% in the R0-, around 25% for R1- and 0% in R2-patients. Local recurrence was around 30% in the R0- and around 65% in R1-stage patients. R0-/R1-stage patients survived statistically significantly longer than the R2-group otherwise there was no statistical significant difference between IORT and non-IORT groups in any R-stages regarding overall survival or local recurrence. Conclusions: Macroscopic removal of the recurrence improves survival. Whether R0- is better than R1-resections is not clear. The effect of IORT is not a major one. IORT need be evaluated in randomised controlled trials

  3. DECISION SUPPORT SYSTEM PEMBERIAN BONUS TAHUNAN PADA KARYAWAN BERDASARKAN KINERJA KARYAWAN MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING (STUDY KASUS : STMIK PRINGSEWU

    Directory of Open Access Journals (Sweden)

    Zulkifli Zulkifli

    2017-05-01

    Full Text Available Bonuses is one method that is widely used as a form of tribute to workers whose performance so far can be considered satisfactory by the company. So is the case with STMIK Pringsewu that rewards Her staff as a token of appreciation for its performance over the years. However, the annual bonus is only given to employees who are considered berprestasit. It required a decision support system (DSS or decesion support system that can take into account all the criteria that support and to help facilitate the decision making process. This decision support system using Simple Additive Wighting (SAW. The issue of decision support is basically a form of election of the various alternative actions that may be selected include discipline or the number of absences in a year, length of employment, crafts, and work in a year that the process through specific mechanisms, in hopes of generating a best decision. Employees who got the votes of 100% working receive an annual bonus that is the departure of the hajj, work evaluation 87.5% earn an annual bonus that is the departure of Umrah, and the assessment work 75% earn an annual bonus that is the departure of the general allowance.

  4. Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production.

    Directory of Open Access Journals (Sweden)

    Raheem Ullah

    Full Text Available Proteases are widely used to remove affinity and solubility tags from recombinant proteins to avoid potential interference of these tags with the structure and function of the fusion partner. In recent years, great interest has been seen in use of the human rhinovirus 3C protease owing to its stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious and time-consuming procedures before proteolysis can occur. To address this issue, we examined the effect of elution buffers used for common affinity based purifications, salt ions, stability/solubility and reducing agents, and detergents on the activity of the human rhinovirus 3C protease using three different fusion proteins at 4°C, a temperature of choice for purification of many proteins. The results show that the human rhinovirus 3C protease performs better at 4°C than the frequently used tobacco etch virus protease and its activity was insensitive to most of the experimental conditions tested. Though number of fusion proteins tested is limited, we expect that these finding will facilitate the use of the human rhinovirus 3C protease in recombinant protein production for pharmaceutical and biotechnological applications.

  5. Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production.

    Science.gov (United States)

    Ullah, Raheem; Shah, Majid Ali; Tufail, Soban; Ismat, Fouzia; Imran, Muhammad; Iqbal, Mazhar; Mirza, Osman; Rhaman, Moazur

    2016-01-01

    Proteases are widely used to remove affinity and solubility tags from recombinant proteins to avoid potential interference of these tags with the structure and function of the fusion partner. In recent years, great interest has been seen in use of the human rhinovirus 3C protease owing to its stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious and time-consuming procedures before proteolysis can occur. To address this issue, we examined the effect of elution buffers used for common affinity based purifications, salt ions, stability/solubility and reducing agents, and detergents on the activity of the human rhinovirus 3C protease using three different fusion proteins at 4°C, a temperature of choice for purification of many proteins. The results show that the human rhinovirus 3C protease performs better at 4°C than the frequently used tobacco etch virus protease and its activity was insensitive to most of the experimental conditions tested. Though number of fusion proteins tested is limited, we expect that these finding will facilitate the use of the human rhinovirus 3C protease in recombinant protein production for pharmaceutical and biotechnological applications.

  6. Does the evidence about health risks associated with nitrate ingestion warrant an increase of the nitrate standard for drinking water?

    Science.gov (United States)

    van Grinsven, Hans JM; Ward, Mary H; Benjamin, Nigel; de Kok, Theo M

    2006-01-01

    Several authors have suggested that it is safe to raise the health standard for nitrate in drinking water, and save money on measures associated with nitrate pollution of drinking water resources. The major argument has been that the epidemiologic evidence for acute and chronic health effects related to drinking water nitrate at concentrations near the health standard is inconclusive. With respect to the chronic effects, the argument was motivated by the absence of evidence for adverse health effects related to ingestion of nitrate from dietary sources. An interdisciplinary discussion of these arguments led to three important observations. First, there have been only a few well-designed epidemiologic studies that evaluated ingestion of nitrate in drinking water and risk of specific cancers or adverse reproductive outcomes among potentially susceptible subgroups likely to have elevated endogenous nitrosation. Positive associations have been observed for some but not all health outcomes evaluated. Second, the epidemiologic studies of cancer do not support an association between ingestion of dietary nitrate (vegetables) and an increased risk of cancer, because intake of dietary nitrate is associated with intake of antioxidants and other beneficial phytochemicals. Third, 2–3 % of the population in Western Europe and the US could be exposed to nitrate levels in drinking water exceeding the WHO standard of 50 mg/l nitrate, particularly those living in rural areas. The health losses due to this exposure cannot be estimated. Therefore, we conclude that it is not possible to weigh the costs and benefits from changing the nitrate standard for drinking water and groundwater resources by considering the potential consequences for human health and by considering the potential savings due to reduced costs for nitrate removal and prevention of nitrate pollution. PMID:16989661

  7. Does the evidence about health risks associated with nitrate ingestion warrant an increase of the nitrate standard for drinking water?

    Science.gov (United States)

    van Grinsven, Hans J M; Ward, Mary H; Benjamin, Nigel; de Kok, Theo M

    2006-09-21

    Several authors have suggested that it is safe to raise the health standard for nitrate in drinking water, and save money on measures associated with nitrate pollution of drinking water resources. The major argument has been that the epidemiologic evidence for acute and chronic health effects related to drinking water nitrate at concentrations near the health standard is inconclusive. With respect to the chronic effects, the argument was motivated by the absence of evidence for adverse health effects related to ingestion of nitrate from dietary sources. An interdisciplinary discussion of these arguments led to three important observations. First, there have been only a few well-designed epidemiologic studies that evaluated ingestion of nitrate in drinking water and risk of specific cancers or adverse reproductive outcomes among potentially susceptible subgroups likely to have elevated endogenous nitrosation. Positive associations have been observed for some but not all health outcomes evaluated. Second, the epidemiologic studies of cancer do not support an association between ingestion of dietary nitrate (vegetables) and an increased risk of cancer, because intake of dietary nitrate is associated with intake of antioxidants and other beneficial phytochemicals. Third, 2-3 % of the population in Western Europe and the US could be exposed to nitrate levels in drinking water exceeding the WHO standard of 50 mg/l nitrate, particularly those living in rural areas. The health losses due to this exposure cannot be estimated. Therefore, we conclude that it is not possible to weigh the costs and benefits from changing the nitrate standard for drinking water and groundwater resources by considering the potential consequences for human health and by considering the potential savings due to reduced costs for nitrate removal and prevention of nitrate pollution.

  8. Does the evidence about health risks associated with nitrate ingestion warrant an increase of the nitrate standard for drinking water?

    Directory of Open Access Journals (Sweden)

    Benjamin Nigel

    2006-09-01

    Full Text Available Abstract Several authors have suggested that it is safe to raise the health standard for nitrate in drinking water, and save money on measures associated with nitrate pollution of drinking water resources. The major argument has been that the epidemiologic evidence for acute and chronic health effects related to drinking water nitrate at concentrations near the health standard is inconclusive. With respect to the chronic effects, the argument was motivated by the absence of evidence for adverse health effects related to ingestion of nitrate from dietary sources. An interdisciplinary discussion of these arguments led to three important observations. First, there have been only a few well-designed epidemiologic studies that evaluated ingestion of nitrate in drinking water and risk of specific cancers or adverse reproductive outcomes among potentially susceptible subgroups likely to have elevated endogenous nitrosation. Positive associations have been observed for some but not all health outcomes evaluated. Second, the epidemiologic studies of cancer do not support an association between ingestion of dietary nitrate (vegetables and an increased risk of cancer, because intake of dietary nitrate is associated with intake of antioxidants and other beneficial phytochemicals. Third, 2–3 % of the population in Western Europe and the US could be exposed to nitrate levels in drinking water exceeding the WHO standard of 50 mg/l nitrate, particularly those living in rural areas. The health losses due to this exposure cannot be estimated. Therefore, we conclude that it is not possible to weigh the costs and benefits from changing the nitrate standard for drinking water and groundwater resources by considering the potential consequences for human health and by considering the potential savings due to reduced costs for nitrate removal and prevention of nitrate pollution.

  9. Cytogenetic and molecular studies on tomato chromosomes using diploid tomato and tomato monosomic additions in tetraploid potato

    NARCIS (Netherlands)

    Chang, S.B.

    2004-01-01

    Geneticists have studied the tomato, Lycopersicon esculentum, for several decades and now obtained a saturated linkage map on which numerous genes controlling morphological traits and disease resistances, and molecular markers have been positioned. They also investigated the chromosomes of tomato,

  10. Teaching English as an Additional Language In The Global Classroom: A Transnational Study In The United States and United Kingdom

    Directory of Open Access Journals (Sweden)

    Gail McEachron

    2015-04-01

    Full Text Available Abstract Global research has shown the persistence of inequality with regard to accessing curriculum with a view to obtaining suitable work and making useful contributions to society. The intersection of race, gender, language and low socio-economic levels creates situations which often marginalize ethnic minorities in school settings (Freire, 1968; Nieto & Turner, 2012. The graduation rates in the United States for Native American, African American and Hispanic students are lower than the graduation rates of Whites and Asian Americans. In addition, Bangladeshis and African Caribbeans currently living in the UK are under-represented in higher education, particularly young men in those communities. The research questions that guide this inquiry are: (1 According to databases, how does the academic performance of language minority groups compare to the academic performance of non-linguistic minority groups at the elementary and secondary levels of education? (2 According to language support teachers and university students, what are the strengths and weaknesses of the instructional practices for language minorities who are learning English in the United Kingdom (UK (Bristol and the United States (US (Henrico? Participants were: five UK teachers, four UK university students, five US teachers, four US university students. Data collection supervised by lead researchers included interviews, focus groups, classroom observation, and performance documents. Data analysis utilized a mixed-methods approach. Overall, linguistic minority groups performed lower than their English proficient peers. Culturally, UK teachers provided a greater emphasis on religious instruction, whereas US teachers addressed patriotic topics more frequently. Teachers in the United States and the United Kingdom were culturally supportive with slight variation in the encouraged use of the students’ heritage languages.

  11. Meta-analysis of high-latitude nitrogen-addition and warming studies imply ecological mechanisms overlooked by land models

    Science.gov (United States)

    Bouskill, N. J.; Riley, W. J.; Tang, J.

    2014-08-01

    Accurate representation of ecosystem processes in land models is crucial for reducing predictive uncertainty in energy and greenhouse gas feedbacks with the atmosphere. Here we describe an observational and modeling meta-analysis approach to benchmark land models, and apply the method to the land model CLM4.5 with two versions of belowground biogeochemistry. We focused our analysis on the above and belowground high-latitude ecosystem responses to warming and nitrogen addition, and identified mechanisms absent, or poorly parameterized in CLM4.5. While the two model versions predicted similar trajectories for soil carbon stocks following both types of perturbation, other variables (e.g., belowground respiration) differed from the observations in both magnitude and direction, indicating the underlying mechanisms are inadequate for representing high-latitude ecosystems. The observational synthesis attribute these differences to missing representations of microbial dynamics, characterization of above and belowground functional processes, and nutrient competition. We use the observational meta-analyses to discuss potential approaches to improving the current models (e.g., the inclusion of dynamic vegetation or different microbial functional guilds), however, we also raise a cautionary note on the selection of data sets and experiments to be included in a meta-analysis. For example, the concentrations of nitrogen applied in the synthesized field experiments (average =72 kg ha-1 yr-1) are many times higher than projected soil nitrogen concentrations (from nitrogen deposition and release during mineralization), which preclude a rigorous evaluation of the model responses to nitrogen perturbation. Overall, we demonstrate here that elucidating ecological mechanisms via meta-analysis can identify deficiencies in both ecosystem models and empirical experiments.

  12. Multiple stressors in agricultural streams: a mesocosm study of interactions among raised water temperature, sediment addition and nutrient enrichment.

    Directory of Open Access Journals (Sweden)

    Jeremy J Piggott

    Full Text Available Changes to land use affect streams through nutrient enrichment, increased inputs of sediment and, where riparian vegetation has been removed, raised water temperature. We manipulated all three stressors in experimental streamside channels for 30 days and determined the individual and pair-wise combined effects on benthic invertebrate and algal communities and on leaf decay, a measure of ecosystem functioning. We added nutrients (phosphorus+nitrogen; high, intermediate, natural and/or sediment (grain size 0.2 mm; high, intermediate, natural to 18 channels supplied with water from a nearby stream. Temperature was increased by 1.4°C in half the channels, simulating the loss of upstream and adjacent riparian shade. Sediment affected 93% of all biological response variables (either as an individual effect or via an interaction with another stressor generally in a negative manner, while nutrient enrichment affected 59% (mostly positive and raised temperature 59% (mostly positive. More of the algal components of the community responded to stressors acting individually than did invertebrate components, whereas pair-wise stressor interactions were more common in the invertebrate community. Stressors interacted often and in a complex manner, with interactions between sediment and temperature most common. Thus, the negative impact of high sediment on taxon richness of both algae and invertebrates was stronger at raised temperature, further reducing biodiversity. In addition, the decay rate of leaf material (strength loss accelerated with nutrient enrichment at ambient but not at raised temperature. A key implication of our findings for resource managers is that the removal of riparian shading from streams already subjected to high sediment inputs, or land-use changes that increase erosion or nutrient runoff in a landscape without riparian buffers, may have unexpected effects on stream health. We highlight the likely importance of intact or restored buffer

  13. The effects of additives on the microstructure and sinterability of molybdenum oxide - study of related solid solutions

    International Nuclear Information System (INIS)

    Kassem, M.

    2006-01-01

    This study focuses on the phase transformation induced during mixing a fixed quantity of MoO 3 with various concentration of V 2 O 5 , Bn 2 O 5 , Al 2 O 3 and pure aluminium. These concentrations are 2, 3, 4, 5, 10, 20, 40 and 50%. Employing several physical techniques such as x-ray powder diffraction, FTIR and DTA, different solid solution were identified. Also the compressibility and sintering of these solid solutions have been studied via the variation of the density of pellets prepared from these solid solutions (Author)

  14. The Conjugate Addition- Elimination Reaction of Morita-Baylis-Hillman C- Adducts: A Density Functional Theory Study

    KAUST Repository

    Tan, Davin

    2011-12-01

    The Morita-Baylis-Hillman (MBH) reaction is a very versatile synthetic protocol to synthesize various useful compounds containing several functional groups. MBH acetates and carbonates are highly valued compounds as they have good potential to be precursors for organic synthesis reactions due to their ease of modification and synthesis. This thesis utilizes Density Functional Theory (DFT) calculations to understand the mechanism and selectivity of an unexpected tandem conjugate addition-elimination (CA-E) reaction of allylic alkylated Morita-Baylis-Hillman C- adducts. This synthetic protocol was developed by Prof. Zhi-Yong Jiang and co-workers from Henan University, China. The reaction required the use of sub-stoichiometric amounts of an organic or inorganic Brøndst base as a catalyst and was achieved with excellent yields (96%) in neat conditions. TBD gave the highest yield amongst the organocatalysts and Cs2CO3 gave the highest yield amongst all screened bases. A possible mechanistic pathway was proposed and three different energy profiles were modeled using 1,5,7-triaza-bicyclo-[4.4.0]-dec-5-ene (TBD), Cs2CO3 and CO32- as catalysts. All three models were able to explain the experimental observations, revealing both kinetic and thermodynamic factors influencing the selectivity of the CA-E reaction. CO32- model gave the most promising result, revealing a significant energy difference of 17.9 kcal/mol between the transition states of the two differing pathways and an energy difference of 20.9 kcal/mol between the two possible products. Although TBD modeling did not show significant difference in the transition states of the differing pathways, it revealed an unexpected secondary non-covalent electrostatic interaction, involving the electron deficient C atom of the triaza CN3 moiety of the TBD catalyst and the O atom of a neighboring NO2- group in the intermediate. Subsequent modeling using a similar substrate proved the possibility of this non

  15. Study of NiO cathode modified by rare earth oxide additive for MCFC by electrochemical impedance spectroscopy

    International Nuclear Information System (INIS)

    Huang Bo; Chen Gang; Li Fei; Yu Qingchun; Hu Keao

    2004-01-01

    The preparation and subsequent oxidation of nickel cathodes modified by impregnation with rare earth oxide were evaluated by surface and bulk analysis. The electrochemical behaviors of rare earth oxide impregnated nickel oxide cathodes were also evaluated in a molten 62 mol% Li 2 CO 3 +38 mol% K 2 CO 3 eutectic at 650 deg. C by electrochemical impedance spectroscopy (EIS) as a function of rare earth oxide content and immersion time. The rare earth oxide-impregnated nickel cathodes show almost the similar porosity, pore size, and morphology to the reference nickel cathode. The stability tests of rare earth oxide-impregnated nickel oxide cathodes show that the rare earth oxide additive can dramatically reduce the solubility of nickel oxide in a eutectic carbonate mixture under the standard cathode gas condition. The impedance response of all cathode materials at different immersion time is characterized by the presence of depressed semicircles in the high frequency range changing over into the lines with the angles of which observed with the real axis differing 45 deg. or 90 deg. in the low frequency range. The experimental Nyquist plots can be well analyzed theoretically with a modified model based on the well-known Randles-Ershler equivalent circuit model. In the new model, the double layer capacity (C d ) is replaced by the parallel combination of C d and b/ω; therefore, this circuit is modified to be the parallel combination of (C d ), b/ω, and the charge transfer resistance (R ct ) based on the Randles-Ershler equivalent circuit, to take into consideration both the non-uniformity of electric field at the electrode/electrolyte interface owing to the roughness of electrode surface, and the variety of relaxation times with adsorbed species on the electrode surface. The impedance spectra for all cathode materials show important variations during the 200 h of immersion. The incorporation of lithium in its structure and the low dissolution of nickel oxide and rare

  16. Chronic rectal bleeding after high dose conformal treatment of prostate cancer warrants modification of existing morbidity scales

    International Nuclear Information System (INIS)

    Hanlon, A.L.; Schulthiess, T.E.; Hunt, M.A.; Movsas, B.; Peter, R.; Hanks, G.E.

    1996-01-01

    Purpose: Serious late morbidity (Grade (3(4))) from the conformal treatment of prostate cancer has been reported in <1% to 6% of patients. This study demonstrates that the reported frequency of Grade (3(4)) complications varies by the morbidity scale selected and that no existing morbidity scale adequately represents chronic rectal bleeding, which is our most frequent persisting late sequela of high dose conformal treatment. Materials and Methods: Between (5(89)) and (12(93)), 352 patients with T1-3 NXM0 prostate cancers were treated with our 4-field conformal technique without special rectal blocking. This technique includes a 1 cm margin from the CTV to the PTV in all directions. The median follow-up for these patients was 38 mos (4 to 78), and the median ICRU reporting point dose was 74 Gy (63 to 81). Patients are followed at six month intervals, and no patient is lost to follow-up. Three morbidity scales are assessed, the RTOG, the late effects group (LENT), and our modification of the LENT (FC-LENT). This modification registers chronic rectal bleeding requiring more than two coagulations as a grade 3 event. Estimates for Grade (3(4)) late GI complication rates were determined using Kaplan-Meier methodology. Differences in morbidity rates were evaluated using the log-rank test and differences in time to latency of complications were evaluated using the nonparametric Wilcoxon test. The duration of severe symptoms with chronic rectal bleeding is measured from the first to the last transrectal coagulation. Results: Sixteen patients developed Grade (3(4)) complications by one of the three morbidity scales. Two patients required surgery (colostomy, sigmoid resection), 5 required a transfusion, and 9 required more than two coagulations. The median latency to the third coagulation (plus or minus transfusions) was 24 mos (17 to 40). The median duration of bleeding between the first and last coagulation was 6 mos (3 to 25), illustrating the chronicity of this problem

  17. Traffic Safety Facts - Research Note: Additional Analysis of National Child Restraint Use Special Study: Characteristics Of Those Not Restrained

    Science.gov (United States)

    2018-03-01

    The National Child Restraint Use Special Study (NCRUSS) recorded the use of car seats and belt-positioning booster seats in children up to 8 years old in 4,167 vehicles. Observers approached vehicles that carried at least one child. They interviewed ...

  18. Effectiveness Of Education To Improve Ability Game For Children Learning Difficulties Additive (Study Case at SDN 1 Lamongan

    Directory of Open Access Journals (Sweden)

    Nisaul Barokati

    2015-03-01

    Full Text Available This research is motivated by the child's learning disabilities who cannot do the sums 1-20. From roommates Researchers Gave test, the child cannot do the sums 1-20. This study aims to Prove the effectiveness of educational games for kids summation improves learning disabilities. Type of research is the Single Subject Research, with ABA design and the data analysis techniques using visual analysis chart. Measurement variables using a percentage of the number of questions answered the Correctly. From the results of this study indicate that effective educational games to Enhance the abilities of the sum of numbers for child learning disabilities in SDN 1 Lamongan So that educational games can be used as one solution to help improve the child's ability to sum numbers learning disabilities

  19. Study of the influence of the addition of MMT clay in the preparation of biohydrogel based natural polymers

    International Nuclear Information System (INIS)

    Costa, M.P.M.; Ferreira, I.L.M.

    2014-01-01

    In this study, biohydrogels were produced from the combination of two polysaccharides (chitosan and sodium alginate). The concentrations of polysaccharide (0.5 to 3% m / m) and clay (0.5 and 2.0%) were varied. CaCl2 was used as a crosslinking agent. The samples were characterized by thermogravimetry (thermal stability), FTIR (chemical composition), scanning electron microscopy (SEM), and X-ray diffraction. The present work aims to study the influence of different clay content in biohydrogel produced. In the presence of clay, a differentiated morphology was observed by SEM. The degree of swelling was evaluated as a function of the composition of each mixture. The presence of clay caused a significant swelling of the hydrogel on the water absorption when the clay content was increased. The FTIR spectra showed the presence of characteristic bands of each polysaccharide, and the clay. The XRD showed that the amorphous presented biohydrogel behavior. (author)

  20. Study of wine tartaric acid salt stabilization by addition of carboxymethylcellulose (CMC: comparison with the « protective colloids » effect

    Directory of Open Access Journals (Sweden)

    Vincent Gerbaud

    2010-12-01

    Significance and impact of the study: The OIV-OENO 366-2009 and OIV-OENO 02/2008 resolutions recently authorized the use of CMC to prevent tartaric acid salt precipitation. With no impact on health, and stable under heating and in acid solution, CMC is an efficient candidate for tartaric stabilization. The optimal concentration of 20 mg.L-1 (2 g.hL-1 should however be adapted to local wine storage conditions and KHT crystallization risk.

  1. A Study on the Manufacturing Properties of Crack Self-Healing Capsules Using Cement Powder for Addition to Cement Composites

    OpenAIRE

    Choi, Yun-Wang; Oh, Sung-Rok; Choi, Byung-Keol

    2017-01-01

    We fabricated crack self-healing capsules using cement powder for mixing into cement composites and evaluated the properties of the capsule manufacturing process in this study. The manufacture of the self-healing capsules is divided into core production processing of granulating cement in powder form and a coating process for creating a wall on the surfaces of the granulated cement particles. The produced capsules contain unhardened cement and can be mixed directly with the cement composite m...

  2. XPS study of the influence of minute additions of carbon metal-containing nanoforms on the polymer structure

    Energy Technology Data Exchange (ETDEWEB)

    Shabanova, I.N., E-mail: xps@ftiudm.ru [Physicotechnical Institute of the Ural Branch of the Russian Academy of Sciences, 132 Kirov Street, Izhevsk 426000 (Russian Federation); FGBOU GOU VPO “Udmurt State University”, 1 Universitetskaya Street, Izhevsk 426034 (Russian Federation); Terebova, N.S.; Sapozhnikov, G.V. [Physicotechnical Institute of the Ural Branch of the Russian Academy of Sciences, 132 Kirov Street, Izhevsk 426000 (Russian Federation); FGBOU GOU VPO “Udmurt State University”, 1 Universitetskaya Street, Izhevsk 426034 (Russian Federation)

    2014-08-15

    Highlights: • The X-ray photoelectron spectroscopy was used for studying modification of the polymers such as polycarbonate, polymethylmethacrylate and polyvinyl alcohol. • Carbon metal-containing nanostructures use for modification of the polymers. • For obtaining the maximal degree of the modification of the studied polymers it is necessary that the content of carbon copper-containing nanoforms in them would be ∼10{sup −3}%. - Abstract: In the present paper, the degree of the modification depending on the content of carbon copper-containing nanoforms is studied for polymers such as polycarbonate, polymethylmethacrylate and polyvinyl alcohol which have different structure and different content of oxygen bound to carbon. It is shown that for obtaining the maximal degree of the modification of the above polymers, the content of carbon copper-containing nanoforms should be in the range of 10{sup −2}–10{sup −3}%. In this case the structure of the nano-modified polymers is formed similar to the structure of the nanoforms. The degree of the modification depends on the amount of oxygen atoms in the polymer structure. The larger is the number of oxygen atoms, the smaller is the content of the nanoforms necessary for the polymer modification; in polycarbonate, the modification starts when the content of the nanostructures is 10{sup −5}%, in polymethylmethacrylate, the modification is observed at the nanostructure content of 10{sup −4}%, and for the polyvinyl alcohol modification the minimal content of 10{sup −3}% is necessary.

  3. The Study on Thermal Expansion of Ceramic Composites with Addition of ZrW[2]O]8

    OpenAIRE

    Dedova, Elena Sergeevna; Shadrin, V. S.; Petrushina, M. Y.; Kulkov, Sergey Nikolaevich

    2016-01-01

    The studies on structure, phase composition and thermal properties of (Al[2]O[3] - 20 wt% ZrO[2]) - ZrW[2]O[8] ceramic composites obtained using nanosized, initial powders were conducted. Homogeneously distributed white particles on the polished surface of composites were observed. Phase composition of the composites was represented with corundum, monoclinic ZrO[2] and two modifications of ZrW[2]O[8] (tetragonal and cubic). Linear thermal expansion coefficient values of the composites were de...

  4. Study of agronomic characteristics and advantage indices in intercropping of additive series of Chickpea (Cicer arietinum L.) and Black Cumin (Nigella sativa L.)

    OpenAIRE

    esmaeil rezaei-chiyaneh; Esmaeil Gholinezhad

    2015-01-01

    Study of agronomic characteristics and advantage indices in intercropping of additive series of Chickpea (Cicer arietinum L.) and Black Cumin (Nigella sativa L.) Abstract In order to evaluate quantitive and qualitive yield of Chickpea (Cicer arietinum L.) and Black Cumin (Nigella sativa L.) in intercropping of additive series, a field experiment was arranged in a randomized complete block design with three replications in West Azerbaijan province- city Nagadeh, Iran during growing r...

  5. Thallium-201 single photon emission tomography of myocardium. Additional information in reinjection studies is dependent on collateral circulation

    International Nuclear Information System (INIS)

    Bartenstein, P.; Schober, O.; Schaefers, M.; Matheja, P.; Hasfeld, M.; Breithardt, G.

    1992-01-01

    A second thallium-201 injection under resting conditions is able to improve the differentiation between myocardial scar and ischaemia when compared with simple redistribution imaging. The aim of this study was to evaluate the dependence of this improvement on the degree of stenosis and the presence of collaterals. Single photon emission tomography (SPET) studies under exercise, redistribution and reinjection conditions were performed on 84 patients with 181 stenotic vessels (70 left anterior descending, 47 left circumflex, 64 right coronary artery) and compared with angiography. An improvement of the 201 Tl uptake in the reinjection image was observed in 53% of the myocardial areas served by a coronary artery with a stenosis of over 90%. This is compared with 13% of the areas served by a vessel with a stenosis between 50% and 90%. Some 90% of the collateralized areas showed a fill-in effect, but only 7 of the 118 without angiographically visible collateralization (6%). The dependence of the fill-in effect, collateralization and >90% stenosis was highly significant (χ 2 test, P 90% narrowing. The fill-in effect was closely correlated to the presence of collaterals. In these cases, the fill-in may be an indication for hibernating myocardium. (orig.)

  6. Theoretical Study for The Influence of Biodiesel Addition on The Combustion, Performance and Emissions Parameters of Single Cylinder Diesel Engine

    Directory of Open Access Journals (Sweden)

    Mohamed F. Al-Dawody

    2017-08-01

    Full Text Available This study examines the characteristics of combustion, performance and emission of constant speed compression ignition engine fed with different percentages of diesel fuel and rapeseed methyl ester (RME on a volume basis by using the well-known software simulation Diesel-RK. As the percentage of RME increased, the maximal pressure is noticed to be closer to top dead center (TDC. It was found that 47.27 %, 81.06 %, 82.56 % and 93.36 % reduction in the Bosch smoke number is obtainable with 10% RME, 20% RME, 50% RME and 100% RME respectively, compared with ordinary diesel. The blends of RME are noticed to emit higher NOx emissions. The result signals that 10% RME is the promising ratio of blending which reports less performance variations and reduced carbon emissions as well. The effect of variable injection timings is studied to moderate biodiesel NOx effects on the 10% RME and 18 degree crank angle before top dead center (BTDC was recorded as the advisable injection timing which gives a promising reduction in NOx emissions.

  7. A Study on the Manufacturing Properties of Crack Self-Healing Capsules Using Cement Powder for Addition to Cement Composites

    Directory of Open Access Journals (Sweden)

    Yun-Wang Choi

    2017-01-01

    Full Text Available We fabricated crack self-healing capsules using cement powder for mixing into cement composites and evaluated the properties of the capsule manufacturing process in this study. The manufacture of the self-healing capsules is divided into core production processing of granulating cement in powder form and a coating process for creating a wall on the surfaces of the granulated cement particles. The produced capsules contain unhardened cement and can be mixed directly with the cement composite materials because they are protected from moisture by the wall material. Therefore, the untreated cement is present in the form of a capsule within the cement composite, and hydration can be induced by moisture penetrating the crack surface in the event of cracking. In the process of granulating the cement, it is important to obtain a suitable consistency through the kneading agent and to maintain the moisture barrier performance of the wall material. We can utilize the results of this study as a basis for advanced self-healing capsule technology for cement composites.

  8. Warrant Officer Examinations. PR-4018

    Science.gov (United States)

    1944-10-10

    ccouunting, Administrative - Clcorica1, Judge, Advo Ge~nc. De~ptsAdxiiniistrati~ve 1 icl Adi isrtv - Supp:ly, generaile8 ~ Administrativo ’ - Supply, Air...chronological index if action in processing special and summary records of trial. Answers teleph.’nic inquirie’s pertaining to subject matter contain- ed...reproduction by lithopraphy, black and white process printing, and gelatin duplication; moy couidinnte and supervise procurement, storage, and distribution of

  9. Cross-sectional study assessing the addition of contrast sensitivity to visual acuity when testing for fitness to drive

    Science.gov (United States)

    Spreng, Lucie; Favrat, Bernard; Borruat, François-Xavier; Vaucher, Paul

    2018-01-01

    Objectives The aim of this study is to quantify the importance of loss of contrast sensitivity (CS) and its relationship to loss of visual acuity (VA), driving restrictions and daytime, on-road driving evaluations in drivers aged 70+. Design A predictive cross-sectional study. Setting Volunteer participants to a drivers’ refresher course for adults aged 70+ delivered by the Swiss Automobile Club in western Switzerland from 2011 to 2013. Participants 162 drivers, male and female, aged 70 years or older. Clinical predictors We used a vision screener to estimate VA and the The Mars Letter Contrast Sensitivity Test to test CS. Outcomes We asked drivers to report whether they found five driving restrictions useful for their condition; restrict driving to known roads, avoid driving on highways, avoid driving in the dark, avoid driving in dense traffic and avoid driving in fog. All participants also underwent a standardised on-road evaluation carried out by a driving instructor. Results Moderate to severe loss of CS for at least one eye was frequent (21.0% (95% CI 15.0% to 28.1%)) and often isolated from a loss of VA (11/162 cases had a VA ≥0.8 decimal and a CS of ≤1.5 log(CS); 6.8% (95% CI 3.4% to 11.8%)). Drivers were more likely (R2=0.116, P=0.004) to report a belief that self-imposed driving restrictions would be useful if they had reduced CS in at least one eye. Daytime evaluation of driving performance seems limited in its ability to correctly identify difficulties related to CS loss (VA: R2=0.004, P=0.454; CS: R2=0.006, P=0.332). Conclusion CS loss is common for older drivers. Screening CS and referring for cataract surgery even in the absence of VA loss could help maintain mobility. Reduced CS and moderate reduction of VA were both poor predictors of daytime on-road driving performances in this research study. PMID:29374663

  10. The antimicrobial effectiveness of photodynamic therapy used as an addition to the conventional endodontic re-treatment: a clinical study.

    Science.gov (United States)

    Jurič, Ivona Bago; Plečko, Vanda; Pandurić, Dragana Gabrić; Anić, Ivica

    2014-12-01

    The purpose of the study was to evaluate the efficacy of antimicrobial photodynamic therapy (aPDT) used as an adjunct to the endodontic re-treatment in the eradication of microorganisms from previously filled root canals. The study sample consisted of 21 randomly selected patients with root filled and infected root canal system with chronic apical periodontitis on incisors or canines, who have had previously endodontic treatment. Microbiological samples from the root canals were collected after accessing the canal, following the endodontic re-treatment and after the aPDT procedure. During instrumentation, the root canals were irrigated with 2.5% sodium hypochlorite (NaOCl), and the final irrigation protocol included 17% ethylenediaminetetraacetic acid followed by NaOCl. Root canals were filled with a phenothiazinium chloride and irradiated with a diode laser (λ=660 nm, 100 mW) for 1 min. Microbiological samples from the root canals were cultivated on selective plates, and the identification was done by micromorphology, macromorphology and different API strips as well as bacterial counts (colony forming units). Fourteen bacteria species were isolated from the root canals initially, with a mean value of 4.57 species per canal. Although endodontic re-treatment alone produced a significant reduction in the number of bacteria species (pendodontic treatment and aPDT was statistically more effective (proot canals of 11 teeth. The results indicated that the aPDT used as an adjunct to the conventional endodontic therapy achieved a significant further reduction of intracanal microbial load. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. From crucial issue to additional question. A study of the political debate about nuclear waste in Sweden 1976-2009

    International Nuclear Information System (INIS)

    Nord, Lars; Stur, Elisabeth

    2010-11-01

    The overall purpose of this paper is to investigate how the premises for the political decision processes in the issue of final disposal of the Swedish nuclear waste are affected by changes in the public opinion climate and global events. The paper therefore focuses on questions concerning how the national political debate leading up to decisions interacts with the media debate, and the public opinion dynamic that arises when the two debates relate to each other. Particular interest is devoted to the arguments and standpoints that occur in politics and media and how they refer to the prevailing public opinion situation and to conditions in the surrounding world of a political, legal, economic, ecological and technological nature. An analysis of the arenas and actors involved in the debates ought to provide valuable knowledge regarding how the political agenda has been formed at different points in time. The following questions are of central interest to the study: - What characterizes the parliamentary and the party political debate in the nuclear waste issue, and in what way have actors, standpoints and arguments changed over time? - What characterizes opinion formation and news reporting in the media in the nuclear waste issue and in what way have actors, standpoints and arguments changed over time? The course of the debate at four different times and in connection with four parliamentary elections during the period 1976-2009 is analyzed in the study. The subject of the analysis includes the four parliamentary parties the Centre Party, the Liberal Party, the Moderates and the Social Democrats. These four parties have been chosen because they have been represented in the Swedish Parliament during the entire period studied and are therefore reasonable to compare. The study has mainly been conducted as a qualitative textual analysis of public print, party documents and media content. The qualitative text analysis is complemented to some extent by other existing

  12. The effects of workplace psychosocial factors on whether Japanese dual-earner couples with preschool children have additional children: a prospective study

    OpenAIRE

    EGUCHI, Hisashi; SHIMAZU, Akihito; FUJIWARA, Takeo; IWATA, Noboru; SHIMADA, Kyoko; TAKAHASHI, Masaya; TOKITA, Masahito; WATAI, Izumi; KAWAKAMI, Norito

    2016-01-01

    This study explored the effect of workplace psychosocial factors (job demand, job control, and workplace social support) on dual-earner couples in Japan having additional children, using a prospective study design. We conducted a 2-year prospective cohort study with 103 dual-earner couples with preschool children in Japan, as part of the Tokyo Work?Family Interface Study II. We used multivariable logistic regression analyses to evaluate the prospective association of job strain (categorized i...

  13. Use of polar and nonpolar fractions as additional information sources for studying thermoxidized virgin olive oils by FTIR

    Directory of Open Access Journals (Sweden)

    Tena, N.

    2014-09-01

    Full Text Available Fourier transform infrared (FTIR spectroscopy has been proposed to study the degradation of virgin olive oils (VOO in samples undergoing thermoxidation. The polar and nonpolar fractions of oxidized oils have been analyzed by FTIR to provide further information on the minor spectral changes taking place during thermoxidation. This information assists in the interpretation of the spectra of the samples. For this purpose polar and nonpolar fractions of 47 VOO samples thermoxidized (190 °C in a fryer were analyzed by FTIR. The time-course change of the band area assigned to single cis double bonds was explained by their correlation with the decrease in oleic acid (adjusted-R2=0.93. The bands assigned to the hydroxyl groups and the first overtone of ester groups was better studied in the spectra collected for the polar and nonpolar fractions, respectively. The bands assigned to peroxide, epoxy, tertiary alcohols and fatty acids were clearly observed in the spectra of the polar fraction while they are not noticeable in the spectra of the oils.La espectroscopía de infrarrojos por transformada de Fourier (FTIR se ha propuesto para estudiar la degradación de los aceites de oliva vírgenes (AOV sujetas a termoxidación. Las fracciones polares y no polares de aceites oxidados se analizaron mediante FTIR para obtener más información sobre los cambios espectrales menores que tienen lugar durante la termoxidación. Esa información ayuda en la interpretación de los espectros de las muestras puras. Con este objetivo, fracciones polares y no polares de 47 AOV termoxidados (190 °C en una freidora se analizaron mediante FTIR. La banda asignada a dobles enlaces cis se explica por su correlación con la disminución de ácido oleico (R2-ajustado=0,93. Las bandas asignadas a los grupos hidroxilos y del primer sobretono de los grupos éster se estudió mejor en los espectros recogidos para la fracción polar y no polar, respectivamente. Grupos asignados a per

  14. Improved Outcome Prediction Using CT Angiography in Addition to Standard Ischemic Stroke Assessment: Results from the STOPStroke Study

    Science.gov (United States)

    González, R. Gilberto; Lev, Michael H.; Goldmacher, Gregory V.; Smith, Wade S.; Payabvash, Seyedmehdi; Harris, Gordon J.; Halpern, Elkan F.; Koroshetz, Walter J.; Camargo, Erica C. S.; Dillon, William P.; Furie, Karen L.

    2012-01-01

    Purpose To improve ischemic stroke outcome prediction using imaging information from a prospective cohort who received admission CT angiography (CTA). Methods In a prospectively designed study, 649 stroke patients diagnosed with acute ischemic stroke had admission NIH stroke scale scores, noncontrast CT (NCCT), CTA, and 6-month outcome assessed using the modified Rankin scale (mRS) scores. Poor outcome was defined as mRS>2. Strokes were classified as “major” by the (1) Alberta Stroke Program Early CT Score (ASPECTS+) if NCCT ASPECTS was≤7; (2) Boston Acute Stroke Imaging Scale (BASIS+) if they were ASPECTS+ or CTA showed occlusion of the distal internal carotid, proximal middle cerebral, or basilar arteries; and (3) NIHSS for scores>10. Results Of 649 patients, 253 (39.0%) had poor outcomes. NIHSS, BASIS, and age, but not ASPECTS, were independent predictors of outcome. BASIS and NIHSS had similar sensitivities, both superior to ASPECTS (p10/BASIS+ had poor outcomes, versus 21.5% (77/358) with NIHSS≤10/BASIS− (p10/BASIS+ compared to patients who are NIHSS≤10/BASIS−; the odds ratio is 5.4 (95% CI: 3.5 to 8.5) when compared to patients who are only NIHSS>10 or BASIS+. Conclusions BASIS and NIHSS are independent outcome predictors. Their combination is stronger than either instrument alone in predicting outcomes. The findings suggest that CTA is a significant clinical tool in routine acute stroke assessment. PMID:22276182

  15. Dynamic Study of Feed-Effluent Heat Exchanger Addition on Double Bed Configuration Ammonia Reactor System within Varied Quenching Ratio

    Directory of Open Access Journals (Sweden)

    Adhi Tri Partono

    2018-01-01

    Full Text Available Ammonia is one of the most important industrial commodity due to its wide function. Ammonia synthesis reaction is an exotermic reaction. Therefore, Feed-Effluent Heat Exchanger (FEHE is added to increase thermal efficiency. However, FEHE could lead the process to experience hysteresis phenomenon due to interaction between equipments as one steady state T feed could result several T outlet. Hysteresis phenomenon may result asset losses like explosion, leakage, and loosing material integrity. Double bed reactor configuration allows us to use several operating parameters as variation to overcome hysteresis. In this review, quenching ratio was chosen to be that varied parameter. This study aims to determine how quenching ratio affects hysteresis zone by utilizing Aspen Hysys® V8.8 as simulation tool. Simulation showed that quenching ratio would narrow hysteresis zone yet increased extinction temperature that lower the conversion. Conversion profile showed that 0.2 quenching ratio got the highest conversion for system with bed volume ratio 2:1 while total volume was 30 m3. However, the feed temperature was fallen at hysteresis zone. Dynamic simulation showed that highest conversion feed temperature (10%ΔTf above extinct temperature was still able to preserve stability with descending temperature approach. Hysteresis itself started to occur at 1.7%ΔTf above extinct temperature

  16. GENERAL PRINCIPLES OF EU (CRIMINAL LAW: LEGALITY, EQUALITY, NON-DISCRIMINATION, SPECIALTY AND NE BIS IN IDEM IN THE FIELD OF THE EUROPEAN ARREST WARRANT

    Directory of Open Access Journals (Sweden)

    NOREL NEAGU

    2012-05-01

    Full Text Available This article deals with the case law of the Court of Justice of the European Union in the field of the European arrest warrant, critically analysing the principles invoked in several decisions validating the European legislation in the field: legality, equality and non-discrimination, specialty, ne bis in idem. The author concludes that an area of freedom, security and justice could be built on these principles, but further harmonisation of legislation needs to be realised to avoid a ”journey to the unknown” for European citizens in respect to legislation of other member states of the EU.

  17. The effects of workplace psychosocial factors on whether Japanese dual-earner couples with preschool children have additional children: a prospective study.

    Science.gov (United States)

    Eguchi, Hisashi; Shimazu, Akihito; Fujiwara, Takeo; Iwata, Noboru; Shimada, Kyoko; Takahashi, Masaya; Tokita, Masahito; Watai, Izumi; Kawakami, Norito

    2016-12-07

    This study explored the effect of workplace psychosocial factors (job demand, job control, and workplace social support) on dual-earner couples in Japan having additional children, using a prospective study design. We conducted a 2-year prospective cohort study with 103 dual-earner couples with preschool children in Japan, as part of the Tokyo Work-Family Interface Study II. We used multivariable logistic regression analyses to evaluate the prospective association of job strain (categorized into low-strain job, active job, passive job, and strain job groups) and workplace social support (high and low) with couples having additional children during the follow-up period, adjusting for age, for men and women separately. Men in the active job group (i.e., with high job demands and high job control) had a significantly higher odds ratio (OR) of having additional children during the follow-up period, after controlling for age (OR 9.07, 95% confidence interval: 1.27-64.85). No significant association between any workplace psychosocial factor and having additional children was confirmed among women. Having an active job may have a positive influence on having additional children among men in dual-earner couples.

  18. Oxidative N-Heterocyclic Carbene-Catalyzed γ-Carbon Addition of Enals to Imines: Mechanistic Studies and Access to Antimicrobial Compounds.

    Science.gov (United States)

    Zheng, Peng-Cheng; Cheng, Jiajia; Su, Shihu; Jin, Zhichao; Wang, Yu-Huang; Yang, Song; Jin, Lin-Hong; Song, Bao-An; Chi, Yonggui Robin

    2015-07-06

    The reaction mechanism of the γ-carbon addition of enal to imine under oxidative N-heterocyclic carbene catalysis is studied experimentally. The oxidation, γ-carbon deprotonation, and nucleophilic addition of γ-carbon to imine were found to be facile steps. The results of our study also provide highly enantioselective access to tricyclic sulfonyl amides that exhibit interesting antimicrobial activities against X. oryzae, a bacterium that causes bacterial disease in rice growing. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Cardiac MRI in addition to MR angiography: a longitudinal study in vascular risk patients; Kardiale MRT als Ergaenzung zur MR-Angiografie: Eine longitudinale Studie bei vaskulaeren Risikopatienten

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, A.; Grimm, F.; Fenchel, M.; Kramer, U.; Doering, J.S.; Klumpp, B.; Claussen, C.D.; Miller, S. [Abt. fuer Radiologische Diagnostik, Eberhard-Karls-Univ. Tuebingen (Germany); Scheule, A. [Abt. fuer Herz-, Thorax- und Gefaesschirurgie, Eberhard-Karls-Univ. Tuebingen (Germany); May, A.E. [Abt. fuer Kardiologie, Eberhard-Karls-Univ. Tuebingen (Germany)

    2008-05-15

    Purpose: the aim of the study was to assess the feasibility and additional diagnostic information of cardiac MRI as a supplement to state-of-the-art MR angiography (MRA) in the case of vascular risk patients. Therefore, the prevalence of delayed myocardial enhancement (DE) was determined in patients suffering from peripheral artery disease (PAD) and a clinical follow-up was evaluated after 2 years. Materials and method: 87 consecutive patients (ages 66 {+-} 10 years, 67 males) with symptomatic peripheral arterial occlusive disease (n = 68) or abdominal aortic aneurysm (n = 19) were examined using delayed cardiac enhancement (DE) within the clinical indication of MRA at a 1.5T system. A follow-up examination was carried out two years later (24 months {+-} 4 months) with regards to cardiac events (cardiac death, myocardial infarction or acute coronary syndrome, heart insufficiency, coronary revascularization). Results: in total, 40/87 patients had myocardial infarctions shown in MRI (46%). In 25 patients (29%), the myocardial infarction was already known, while in 15 patients (17%) an occult progressing infarction was diagnosed (38% of the myocardial infarcts). Follow-up data was able to be obtained after 2 years for 82 patients. 15 patients had a major cardiac event during the follow-up period, and 10 (67%) of them already showed DE in the MRI. In the group with occult progressing infarctions, cardiac events occurred in 40% (6/15 patients, cardiac death n = 1, ischemia n = 4, heart insufficiency n = 1, bypass n = 1), in patients with known infarction in 17% (4/23 patients, cardiac death n = 1, ischemia n = 3, bypass n = 2) and in 11% of patients without myocardial scars (5/44 patients, cardiac death n = 1, ischemia n = 2, heart insufficiency n = 2). (orig.)

  20. Matter of 381 Search Warrants Directed to Facebook, 2017 N.Y. Lexis 767, 2; 2017 NY Slip op. 02586, 2 (N.Y. April 4, 2017

    Directory of Open Access Journals (Sweden)

    Trad. Leopoldo Villar

    2017-08-01

    Full Text Available The growing importance of electronic communications gives a special interest to its protection, which involves several fundamental rights and guarantees such as freedom, privacy and property. Due to the importance of the discussion and the different positions it reflects on an issue of such sensitivity and pertinence in the world today, we publish below the translation of the decision by the Supreme Court of the State of New York of April 4, 2017, on the 381 search warrants directed to Facebook user accounts, ordered by the same Court in 2013 in response to a request by the New York County District Attorney, supported in turn by an affidavit given by a prosecutor in a criminal investigation. Facebook filed a motion seeking annulment of the search warrants and disclosure of the Prosecutor’s affidavit but both motions were rejected by the Appeals Division, whereupon Facebook appealed to the New York Supreme Court, which dismissed the appeal. Although most agreed that the appeal was not appropriate, the views of the judges contain interpretations that make their reading very useful and particularly the opinión given by the dissenting judge offers enriching arguments for defending the rights of users of electronic services.

  1. A Comparative Study of Listening Comprehension Measures in English as an Additional Language and Native English-Speaking Primary School Children

    Science.gov (United States)

    McKendry, Mairead Grainne; Murphy, Victoria A.

    2011-01-01

    The aim of this study was to investigate the suitability of different measures of listening comprehension for Years 2, 3 and 4 children with English as an additional language (EAL). Non-standardised uses of reading comprehension measures are often employed as proxy measures of listening comprehension, i.e. for purposes for which they were not…

  2. A pilot study to evaluate the safety and clinical performance of Leucopatch, an autologous, additive-free, platelet-rich fibrin for the treatment of recalcitrant chronic wounds

    DEFF Research Database (Denmark)

    Jørgensen, Bo; Karlsmark, Tonny; Vogensen, Hanne

    2011-01-01

    This prospective, uncontrolled pilot study evaluated the safety and clinical performance of Leucopatch an additive-free, autologous platelet-rich fibrin in the treatment of recalcitrant chronic wounds. Fifteen patients, with 16 lower extremity chronic wounds of varying etiologies were treated...

  3. Evidence-Based Communication Practices for Children with Visual Impairments and Additional Disabilities: An Examination of Single-Subject Design Studies

    Science.gov (United States)

    Parker, Amy T.; Grimmett, Eric S.; Summers, Sharon

    2008-01-01

    This review examines practices for building effective communication strategies for children with visual impairments, including those with additional disabilities, that have been tested by single-subject design methodology. The authors found 30 studies that met the search criteria and grouped intervention strategies to align any evidence of the…

  4. Preliminary studies towards the preparation of reactive 3-pyrrolin-2-ones in conjugate addition reactions for the syntheses of potentially bioactive 2-pyrrolidinones and pyrrolidines

    International Nuclear Information System (INIS)

    Alves, Jose C.F.

    2007-01-01

    Pyrrolin-2-ones and 2-pyrrolidinones are moieties often found in the structure of several biologically active natural products and 3-pyrrolin-2-ones are valuable starting materials in organic synthesis due to their ability to react as acceptors in conjugate addition reactions. In this article we report the initial results about the performed study aiming at the syntheses of reactive 3-pyrrolin-2-ones in conjugate addition reactions and the preparation of a potential precursor for the synthesis of the nootropic (+/-)-nebracetam. (author)

  5. Theoretical study of the nucleophilic addition of oximes to the nitrile complexes trans-/cis-[ReCl4(NCCH3)2

    International Nuclear Information System (INIS)

    Klestova-Nadeeva, E. A.; Kuznetsov, M. L.; Dement'ev, A. I.

    2005-01-01

    The reaction of nucleophilic addition of oximes (HON=CRR 1 ) to organic nitriles coordinated in the rhenium complexes trans-/cis-[ReCl 4 (NCCH 3 ) 2 ] was theoretically studied by the Hartree-Fock and density functional theory (B3LYP) methods. The reaction mechanism involves (I) the initial change of the oxime conformation; (II) the formation of the orientation complex with the coordinated nitrile molecule, which transforms into a four-membered transition state; (III) the formation of the addition product in a less stable conformation; and (IV) the formation of the ultimate addition product. The calculations make it possible to interpret the activation of nitriles in terms of the activated complex theory as a result of stabilization of the transition state in going from the free to the coordinated nitrile [ru

  6. Performance of an Additional Task During Level 2 Automated Driving: An On-Road Study Comparing Drivers With and Without Experience With Partial Automation.

    Science.gov (United States)

    Solís-Marcos, Ignacio; Ahlström, Christer; Kircher, Katja

    2018-05-01

    To investigate the influence of prior experience with Level 2 automation on additional task performance during manual and Level 2 partially automated driving. Level 2 automation is now on the market, but its effects on driver behavior remain unclear. Based on previous studies, we could expect an increase in drivers' engagement in secondary tasks during Level 2 automated driving, but it is yet unknown how drivers will integrate all the ongoing demands in such situations. Twenty-one drivers (12 without, 9 with Level 2 automation experience) drove on a highway manually and with Level 2 automation (exemplified by Volvo Pilot Assist generation 2; PA2) while performing an additional task. In half of the conditions, the task could be interrupted (self-paced), and in the other half, it could not (system-paced). Drivers' visual attention, additional task performance, and other compensatory strategies were analyzed. Driving with PA2 led to decreased scores in the additional task and more visual attention to the dashboard. In the self-paced condition, all drivers looked more to the task and perceived a lower mental demand. The drivers experienced with PA2 used the system and the task more than the novice group and performed more overtakings. The additional task interfered more with Level 2 automation than with manual driving. The drivers, particularly the automation novice drivers, used some compensatory strategies. Automation designers need to consider these potential effects in the development of future automated systems.

  7. Outcomes of an enhancement study with additional psychoeducational sessions for healthy siblings of a child with cancer during inpatient family-oriented rehabilitation.

    Science.gov (United States)

    Niemitz, Mandy; Goldbeck, Lutz

    2018-03-01

    Chronic illness of a child puts healthy children of the family at risk of distress. Previous studies have demonstrated that healthy children's psychological symptoms can be reduced when the child knows more about the disease. So far, there is limited evidence of the effectiveness of psychoeducational interventions for healthy children. To compare the effectiveness of an inpatient family-oriented rehabilitation program with vs without additional psychoeducational sessions for healthy children of families with children with cancer. We performed a controlled study in 4 German family-oriented rehabilitation clinics. The outcomes of n = 73 healthy children (mean age: M = 9.55; SD = 3.14; range: 4-18), who participated in 5 additional psychoeducational sessions, were compared with the outcomes of n = 111 healthy children (mean age: M = 8.85; SD = 3.28; range: 4-17), who underwent the usual inpatient rehabilitation program. Primary outcomes were the healthy children's cancer-specific knowledge and their emotional symptoms. Secondary outcomes were family satisfaction and quality of life. Intention-to-treat analyses showed that both groups improved significantly from preintervention to postintervention. Improvements comprised knowledge about cancer (F(1,174) = 11.03, p child with cancer. Additional psycho-educational sessions did not show any substantial additional improvement. Copyright © 2017 John Wiley & Sons, Ltd.

  8. Additive influence of genetic predisposition and conventional risk factors in the incidence of coronary heart disease: a population-based study in Greece

    Science.gov (United States)

    Yiannakouris, Nikos; Katsoulis, Michail; Trichopoulou, Antonia; Ordovas, Jose M; Trichopoulos, Dimitrios

    2014-01-01

    Objectives An additive genetic risk score (GRS) for coronary heart disease (CHD) has previously been associated with incident CHD in the population-based Greek European Prospective Investigation into Cancer and nutrition (EPIC) cohort. In this study, we explore GRS-‘environment’ joint actions on CHD for several conventional cardiovascular risk factors (ConvRFs), including smoking, hypertension, type-2 diabetes mellitus (T2DM), body mass index (BMI), physical activity and adherence to the Mediterranean diet. Design A case–control study. Setting The general Greek population of the EPIC study. Participants and outcome measures 477 patients with medically confirmed incident CHD and 1271 controls participated in this study. We estimated the ORs for CHD by dividing participants at higher or lower GRS and, alternatively, at higher or lower ConvRF, and calculated the relative excess risk due to interaction (RERI) as a measure of deviation from additivity. Results The joint presence of higher GRS and higher risk ConvRF was in all instances associated with an increased risk of CHD, compared with the joint presence of lower GRS and lower risk ConvRF. The OR (95% CI) was 1.7 (1.2 to 2.4) for smoking, 2.7 (1.9 to 3.8) for hypertension, 4.1 (2.8 to 6.1) for T2DM, 1.9 (1.4 to 2.5) for lower physical activity, 2.0 (1.3 to 3.2) for high BMI and 1.5 (1.1 to 2.1) for poor adherence to the Mediterranean diet. In all instances, RERI values were fairly small and not statistically significant, suggesting that the GRS and the ConvRFs do not have effects beyond additivity. Conclusions Genetic predisposition to CHD, operationalised through a multilocus GRS, and ConvRFs have essentially additive effects on CHD risk. PMID:24500614

  9. Short communication: A laboratory study to validate the impact of the addition of Alnus nepalensis leaf litter on carbon and nutrients mineralization in soil

    OpenAIRE

    GAURAV MISHRA; KRISHNA GIRI; ANTARA DUTTA

    2016-01-01

    Abstract. Mishra G, Giri K, Dutta A, Hazarika S and Borgohain P. 2015. A laboratory study to validate the impact of the addition of Alnus nepalensis leaf litter on carbon and nutrients mineralization in soil. Nusantara Bioscience 8: 5-7. Plant litter or residues can be used as soil amendment to maintain the carbon stock and soil fertility. The amount and rate of mineralization depends on biochemical composition of plant litter. Alnus nepalensis (Alder) is known for its symbiotic nitrogen fixa...

  10. Study of Randomness in AES Ciphertexts Produced by Randomly Generated S-Boxes and S-Boxes with Various Modulus and Additive Constant Polynomials

    Science.gov (United States)

    Das, Suman; Sadique Uz Zaman, J. K. M.; Ghosh, Ranjan

    2016-06-01

    In Advanced Encryption Standard (AES), the standard S-Box is conventionally generated by using a particular irreducible polynomial {11B} in GF(28) as the modulus and a particular additive constant polynomial {63} in GF(2), though it can be generated by many other polynomials. In this paper, it has been shown that it is possible to generate secured AES S-Boxes by using some other selected modulus and additive polynomials and also can be generated randomly, using a PRNG like BBS. A comparative study has been made on the randomness of corresponding AES ciphertexts generated, using these S-Boxes, by the NIST Test Suite coded for this paper. It has been found that besides using the standard one, other moduli and additive constants are also able to generate equally or better random ciphertexts; the same is true for random S-Boxes also. As these new types of S-Boxes are user-defined, hence unknown, they are able to prevent linear and differential cryptanalysis. Moreover, they act as additional key-inputs to AES, thus increasing the key-space.

  11. Study on The Content of Pb in Twigs And Leaves of Kangkung (Ipomoea reptans Poir Boiled With The Addition of NaCl And Acetic Acid

    Directory of Open Access Journals (Sweden)

    Poppy Hartatie Hardjo

    2004-12-01

    Full Text Available Kangkung is a kind of favorable vegetables that used to grow near a river, and is cultivated and watered with water from the river. If the river is polluted by heavy metals, there is a risk that the plant is contaminated too. A study on the content of Pb in kangkung planted in Pb contaminated media has been conducted, and it was proven that Pb was found in the plant. Land kangkung (Ipomoea reptans was used as sample, and was planted in hydrophonic media, and watered with Multigrow Complete Plant Food (2000 mg/L and Pb solution (2 mg/L twice a day. Samples were taken based on the age of 54 days, then the twigs and leaves were boiled in different ways: I. Boiled with no addition, II. Boiled with addition of NaCl , and III. Boiled with addition of acetic acid. IV. Unboiled sample as the control. Inductively Coupled Plasma Spectrometer (ICPS Fison 3410+ was used to measure the Pb content. It was shown that boiling the kangkung reduced the Pb content in the leaves as well as in the twigs; however, the acetic acid addition showed the least effect. In the leaves the three different ways of boiling did not show significant different, while in twigs the different was significant.

  12. Prevalence of Phosphorus-Based Additives in the Australian Food Supply: A Challenge for Dietary Education?

    Science.gov (United States)

    McCutcheon, Jemma; Campbell, Katrina; Ferguson, Maree; Day, Sarah; Rossi, Megan

    2015-09-01

    Phosphorus-based food additives may pose a significant risk in chronic kidney disease given the link between hyperphosphatemia and cardiovascular disease. The objective of the study was to determine the prevalence of phosphorus-based food additives in best-selling processed grocery products and to establish how they were reported on food labels. A data set of 3000 best-selling grocery items in Australia across 15 food and beverage categories was obtained for the 12 months ending December 2013 produced by the Nielsen Company's Homescan database. The nutrition labels of the products were reviewed in store for phosphorus additives. The type of additive, total number of additives, and method of reporting (written out in words or as an E number) were recorded. Presence of phosphorus-based food additives, number of phosphorus-based food additives per product, and the reporting method of additives on product ingredient lists. Phosphorus-based additives were identified in 44% of food and beverages reviewed. Additives were particularly common in the categories of small goods (96%), bakery goods (93%), frozen meals (75%), prepared foods (70%), and biscuits (65%). A total of 19 different phosphorus additives were identified across the reviewed products. From the items containing phosphorus additives, there was a median (minimum-maximum) of 2 (1-7) additives per product. Additives by E number (81%) was the most common method of reporting. Phosphorus-based food additives are common in the Australian food supply. This suggests that prioritizing phosphorus additive education may be an important strategy in the dietary management of hyperphosphatemia. Further research to establish a database of food items containing phosphorus-based additives is warranted. Copyright © 2015 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  13. Radiological status of the environment around the site of Saint-Pierre (Cantal). IRSN Third-party expertise. Part 1: situational analysis and additional studies to be performed

    International Nuclear Information System (INIS)

    2006-01-01

    This document reports the first part of a study which aimed at verifying the relevance of available studies and measurements for the Saint-Pierre ancient mining site and regarding risks related to radioactivity. More specifically, this study aimed at defining the most precisely as possible the perimeter of potential influence of this site for three pollution vectors (water, air, soils) with respect to available studies and in terms of necessary additional studies, at assessing the radiological impact on populations living, working or staying at the neighbourhood of this restored site, and at proposing an evolution of the current survey arrangement in order to make it more adapted and reliable. This first part is dedicated to the analysis of all existing documents in order to define required additional elements (analysis, sampling, surveys, and so on) for a better knowledge of the present radiological status of the studied site. After a presentation of the physical and human characteristics of the site, and of its geological and mineralogical context, and recalled the past mining activities (extraction, processing, wastes, waste rock and tailings), the report proposes an analysis per component: external exposure, radon and dusts, underground waters, surface waters, sediments, aquatic fauna and flora, food products. An assessment and recommendations are formulated. Financial aspects are discussed

  14. A computational study of the addition of ReO3L (L = Cl(-), CH3, OCH3 and Cp) to ethenone.

    Science.gov (United States)

    Aniagyei, Albert; Tia, Richard; Adei, Evans

    2016-01-01

    the [3 + 2] addition pathway and that on the LReO3-ethenone is the [2 + 2] addition pathway, the trends in the activation energies for both pathways are the same, i.e. CH3 > CH3O(-) > Cl(-) > Cp. However, the trends in reaction energies are quite different due to different product stabilities. The formation of the acetic acid precursor through the direct addition pathways was unsuccessful for all the ligands studied. The formation of the acetic acid precursor through the cyclization of the metalla-2-oxetane-3-one is only possible for the ligands L = Cl(-), CH3 whiles for the cyclization of metalla-2-oxetane-4-one to the acetic acid precursor is only possible for the ligand L = CH3. Although there are spin-crossover reaction observed for the ligands L = Cl(-), CH3 and CH3O(-), the reactions occurring on the single surfaces have been found to occur with lower energies than their spin-crossover counterparts.

  15. A whole genome association study to detect additive and dominant single nucleotide polymorphisms for growth and carcass traits in Korean native cattle, Hanwoo

    Directory of Open Access Journals (Sweden)

    Yi Li

    2017-01-01

    Full Text Available Objective A whole genome association study was conducted to identify single nucleotide polymorphisms (SNPs with additive and dominant effects for growth and carcass traits in Korean native cattle, Hanwoo. Methods The data set comprised 61 sires and their 486 Hanwoo steers that were born between spring of 2005 and fall of 2007. The steers were genotyped with the 35,968 SNPs that were embedded in the Illumina bovine SNP 50K beadchip and six growth and carcass quality traits were measured for the steers. A series of lack-of-fit tests between the models was applied to classify gene expression pattern as additive or dominant. Results A total of 18 (0, 15 (3, 12 (8, 15 (18, 11 (7, and 21 (1 SNPs were detected at the 5% chromosome (genome - wise level for weaning weight (WWT, yearling weight (YWT, carcass weight (CWT, backfat thickness (BFT, longissimus dorsi muscle area (LMA and marbling score, respectively. Among the significant 129 SNPs, 56 SNPs had additive effects, 20 SNPs dominance effects, and 53 SNPs both additive and dominance effects, suggesting that dominance inheritance mode be considered in genetic improvement for growth and carcass quality in Hanwoo. The significant SNPs were located at 33 quantitative trait locus (QTL regions on 18 Bos Taurus chromosomes (i.e. BTA 3, 4, 5, 6, 7, 9, 11, 12, 13, 14, 16, 17, 18, 20, 23, 26, 28, and 29 were detected. There is strong evidence that BTA14 is the key chromosome affecting CWT. Also, BTA20 is the key chromosome for almost all traits measured (WWT, YWT, LMA. Conclusion The application of various additive and dominance SNP models enabled better characterization of SNP inheritance mode for growth and carcass quality traits in Hanwoo, and many of the detected SNPs or QTL had dominance effects, suggesting that dominance be considered for the whole-genome SNPs data and implementation of successive molecular breeding schemes in Hanwoo.

  16. In situ synchrotron X-ray diffraction study of the effect of chromium additions to the steel and solution on CO2 corrosion of pipeline steels

    International Nuclear Information System (INIS)

    Ko, M.; Ingham, B.; Laycock, N.; Williams, D.E.

    2014-01-01

    Highlights: •We studied the effect of chromium on CO 2 corrosion processes. •Chromium addition accelerates the onset of siderite and chukanovite precipitation. •One of the key effects is to decrease the critical supersaturation for siderite nucleation. -- Abstract: We demonstrate the important effects of chromium in the steel composition and of Cr 3+ ions in solution on the nucleation and growth of corrosion layers in a CO 2 environment. We propose that high-valent metal cations in solution (within the boundary layer) catalyse the nucleation of siderite, which otherwise has a high critical supersaturation for precipitation. One of the key effects of small alloy additions to the steel is to put into the local solution species that decrease the critical supersaturation for siderite and modify the growth rate of the scale, thereby promoting the formation of an adherent and protective scale

  17. Studies on sintering additives for hydroxyapatite, and controlled porosity structures of calcium aluminates and polypropylene-tricalcium phosphate for bone graft applications

    Science.gov (United States)

    Kalita, Samar Jyoti

    Tissue engineering has made a significant contribution in developing new biomaterials that can restore the structural features and physiological functions of natural tissues. Various materials, such as metals, ceramics, polymers and composites have been developed for their use in hard tissue engineering applications. Part A of this thesis describes my research on HAp ceramics. HAp, a bioactive ceramic, is known for its osteoconductivity, but shows poor mechanical performance. This program aimed at improving mechanical performance of synthetic HAp by introducing small quantities of various sintering additives. A range of oxide-based sintering additives were selected and prepared. Dense compacts were prepared using a uniaxial press with an average green density of 1.6 g/cc. Results showed that some of these sintering additives improved densification, hardness and compression strength of synthetic HAp compared to the pure composition. A maximum bulk density of 3.06 g/cc was achieved for 2.5 wt% addition of MgO. A Microhardness of 4.9 GPa (505 HV) was measured for 2.5 wt% addition of BaO, and the highest compression strength (220MPa) was reported for 2.5 wt% addition of CaO. Cytotoxicity and cell proliferation studies with a modified human osteoblast (HOB) cell-line (OPC1) proved most of these materials non-toxic and biocompatible. Microscopic observation revealed that bone cells were attached and grew well on most of these ceramic matrices. Part B describes my work on development of controlled porosity polypropylene-tricalcium phosphate composite scaffolds via the fused deposition modeling (FDM) process. Hg-porosimetry was performed to determine pore size and their distribution. Uniaxial compression testing performed on samples with 36 vol% porosity and pore size of 160 mum showed the best compressive strength of 12.7 MPa. Part C includes my research on development of "3-D honeycomb" porous calcium aluminate structures via the indirect FDM process. Samples of 29% and

  18. Quality of Life and Neutropenia in Patients with Early Stage Breast Cancer: A Randomized Pilot Study Comparing Additional Treatment with Mistletoe Extract to Chemotherapy Alone

    Directory of Open Access Journals (Sweden)

    Wilfried Tröger

    2009-01-01

    Full Text Available Background: Chemotherapy for breast cancer often deteriorates quality of life, augments fatigue, and induces neutropenia. Mistletoe preparations are frequently used by cancer patients in Central Europe. Physicians have reported better quality of life in breast cancer patients additionally treated with mistletoe preparations during chemotherapy. Mistletoe preparations also have immunostimulant properties and might therefore have protective effects against chemotherapy-induced neutropenia.Patients and Methods: We conducted a prospective randomized open label pilot study with 95 patients randomized into three groups. Two groups received Iscador® M special (IMS or a different mistletoe preparation, respectively, additionally to chemotherapy with six cycles of cyclophosphamide, adriamycin, and 5-fluoro-uracil (CAF. A control group received CAF with no additional therapy. Here we report the comparison IMS (n = 30 vs. control (n = 31. Quality of life including fatigue was assessed with the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire (EORTC-QLQ-C30. Neutropenia was defined as neutrophil counts <1,000/µl and assessed at baseline and one day before each CAF cycle.Results: In the descriptive analysis all 15 scores of the EORTC-QLQ-C30 showed better quality of life in the IMS group compared to the control group. In 12 scores the differences were significant (p < 0.02 and nine scores showed a clinically relevant and significant difference of at least 5 points. Neutropenia occurred in 3/30 IMS patients and in 8/31 control patients (p = 0.182.Conclusions: This pilot study showed an improvement of quality of life by treating breast cancer patients with IMS additionally to CAF. CAF-induced neutropenia showed a trend to lower frequency in the IMS group.

  19. Hydrogen Abstraction Acetylene Addition and Diels-Alder Mechanisms of PAH Formation:  A Detailed Study Using First Principles Calculations.

    Science.gov (United States)

    Kislov, V V; Islamova, N I; Kolker, A M; Lin, S H; Mebel, A M

    2005-09-01

    Extensive ab initio Gaussian-3-type calculations of potential energy surfaces (PES), which are expected to be accurate within 1-2 kcal/mol, combined with statistical theory calculations of reaction rate constants have been applied to study various possible pathways in the hydrogen abstraction acetylene addition (HACA) mechanism of naphthalene and acenaphthalene formation as well as Diels-Alder pathways to acenaphthalene, phenanthrene, and pyrene. The barrier heights; reaction energies; and molecular parameters of the reactants, products, intermediates, and transition states have been generated for all types of reactions involved in the HACA and Diels-Alder mechanisms, including H abstraction from various aromatic intermediates, acetylene addition to radical sites, ring closures leading to the formation of additional aromatic rings, elimination of hydrogen atoms, H disproportionation, C2H2 cycloaddition, and H2 loss. The reactions participating in various HACA sequences (e.g., Frenklach's, alternative Frenklach's, and Bittner and Howard's routes) are demonstrated to have relatively low barriers and high rate constants under combustion conditions. A comparison of the significance of different HACA mechanisms in PAH growth can be made in the future using PES and molecular parameters obtained in the present work. The results show that the Diels-Alder mechanism cannot compete with the HACA pathways even at high combustion temperatures, because of high barriers and consequently low reaction rate constants. The calculated energetic parameters and rate constants have been compared with experimental and theoretical data available in the literature.

  20. Electron-microscopy studies of NaAlH{sub 4} with TiF{sub 3} additive: hydrogen-cycling effects

    Energy Technology Data Exchange (ETDEWEB)

    Andrei, C.M.; Holmestad, R. [Norwegian University of Science and Technology, Department of Physics, Trondheim (Norway); Walmsley, J.C. [SINTEF Materials and Chemistry, Trondheim (Norway); Brinks, H.W.; Hauback, B.C. [Institute for Energy Technology, P.O. Box 40, Kjeller (Norway); Srinivasan, S.S.; Jensen, C.M. [University of Hawaii, Department of Chemistry, Honolulu, HI (United States)

    2005-02-01

    NaAlH{sub 4} is a promising candidate material for hydrogen storage. Ti additives are effective in reducing the reaction temperatures and improving kinetics. In this work, the microstructure of NaAlH{sub 4} with 2% TiF{sub 3} has been studied in different conditions using a combination of transmission electron microscopy and scanning electron microscopy, both with energy-dispersive spectroscopic X-ray analysis. The effect of the additive on particle and grain size was examined after the initial ball-milling process and after 15 cycles. The additive has an uneven distribution in the sample after ball milling. Selected-area diffraction and high-resolution imaging confirmed the presence of TiF{sub 3}. This phase accounts for most of the Ti in the material at this stage and showed limited mixing with the alanate. The grain size within particles for TiF{sub 3} is larger than for the alanate particles. Diffraction from the latter was dominated by metallic aluminium. After cycling, the TiF{sub 3} has decomposed and energy-dispersive spectroscopic X-ray analysis maps showed some combination of Ti with the alanate phase. There is no significant change in the measurable grain size of the Al-containing alanate particles between the ball-milled and the 15-cycled samples, but more cycles result in agglomeration of the material. (orig.)

  1. Study on the effect of hydrogen addition on the variation of plasma parameters of argon-oxygen magnetron glow discharge for synthesis of TiO2 films

    Directory of Open Access Journals (Sweden)

    Partha Saikia

    2016-04-01

    Full Text Available We report the effect of hydrogen addition on plasma parameters of argon-oxygen magnetron glow discharge plasma in the synthesis of H-doped TiO2 films. The parameters of the hydrogen-added Ar/O2 plasma influence the properties and the structural phases of the deposited TiO2 film. Therefore, the variation of plasma parameters such as electron temperature (Te, electron density (ne, ion density (ni, degree of ionization of Ar and degree of dissociation of H2 as a function of hydrogen content in the discharge is studied. Langmuir probe and Optical emission spectroscopy are used to characterize the plasma. On the basis of the different reactions in the gas phase of the magnetron discharge, the variation of plasma parameters and sputtering rate are explained. It is observed that the electron and heavy ion density decline with gradual addition of hydrogen in the discharge. Hydrogen addition significantly changes the degree of ionization of Ar which influences the structural phases of the TiO2 film.

  2. Emission Studies in CI Engine using LPG and Palm Kernel Methyl Ester as Fuels and Di-ethyl Ether as an Additive

    Science.gov (United States)

    Dora, Nagaraju; Jothi, T. J. Sarvoththama

    2018-05-01

    The present study investigates the effectiveness of using di-ethyl ether (DEE) as the fuel additive in engine performance and emissions. Experiments are carried out in a single cylinder four stroke diesel engine at constant speed. Two different fuels namely liquefied petroleum gas (LPG) and palm kernel methyl ester (PKME) are used as primary fuels with DEE as the fuel additive. LPG flow rates of 0.6 and 0.8 kg/h are considered, and flow rate of DEE is varied to maintain the constant engine speed. In case of PKME fuel, it is blended with diesel in the latter to the former ratio of 80:20, and DEE is varied in the volumetric proportion of 1 and 2%. Results indicate that for the engine operating in LPG-DEE mode at 0.6 kg/h of LPG, the brake thermal efficiency is lowered by 26%; however, NOx is subsequently reduced by around 30% compared to the engine running with only diesel fuel at 70% load. Similarly, results of PKME blended fuel showed a drastic reduction in the NOx and CO emissions. In these two modes of operation, DEE is observed to be significant fuel additive regarding emissions reduction.

  3. Studies regarding the influence of brown flaxseed flour addition in wheat flour of a very good quality for bread making on bread quality

    Directory of Open Access Journals (Sweden)

    Georgiana Gabriela CODINA

    2016-11-01

    Full Text Available The aim of this study was to incorporate brown flaxseed into bread in order to improve it quality. For this purpose, different levels of whole ground brown flaxseed (5%, 10%, 15% and 20% were used to substitute wheat flour 650 type of a very good quality for bread making. The bread samples obtained were analyzed from the physical, colour, crumb cell, textural and sensory characteristics point of view. Samples containing 10% of brown flaxseed were with the highest values for loaf volume, porosity and elasticity. The control sample had lowerest redness and greenness value. The maximum hardness was found for bread with 20% brown flaxseed addition. With the increase level of brown flaxseed addition large cells can be noticed in crumb structure of bread. Samples containing 20% of flaxseed were rated poorest in tase, texture, overall acceptability, appearance. Our results indicated that brown flaxseed addition could be added to a typical bread formulation up to levels of 10% with a good overall acceptability offering promising healthy and nutritious alternative to consumers. Between bread flour characteristics at different brown flaxseed flour substitution levels principal component analysis shown significant correlations (p < 0.05 between bread physical characteristics (loaf volume, porosity, elasticity and bread  overall acceptability.

  4. Additional Burden of Diseases Associated with Cadmium Exposure: A Case Study of Cadmium Contaminated Rice Fields in Mae Sot District, Tak Province, Thailand

    Directory of Open Access Journals (Sweden)

    Nisarat Songprasert

    2015-08-01

    Full Text Available The cadmium (Cd contaminated rice fields in Mae Sot District, Tak Province, Thailand has been one of the major environmental problems in Thailand for the last 10 years. We used disability adjusted life years (DALYs to estimate the burden of disease attributable to Cd in terms of additional DALYs of Mae Sot residents. Cd exposure data included Cd and β2–microglobulin (β2-MG in urine (as an internal exposure dose and estimated cadmium daily intake (as an external exposure dose. Compared to the general Thai population, Mae Sot residents gained 10%–86% DALYs from nephrosis/nephritis, heart diseases, osteoporosis and cancer depending on their Cd exposure type and exposure level. The results for urinary Cd and dietary Cd intake varied according to the studies used for risk estimation. The ceiling effect was observed in results using dietary Cd intake because of the high Cd content in rice grown in the Mae Sot area. The results from β2-MG were more robust with additional DALYs ranging from 36%–86% for heart failure, cerebral infraction, and nephrosis/nephritis. Additional DALYs is a useful approach for assessing the magnitude of environmental Cd exposure. The Mae Sot population lost more healthy life compared to populations living in a non- or less Cd polluted area. This method should be applicable to various types of environmental contamination problems if exposure assessment information is available.

  5. The European Arrest Warrant in the Italian legal system. Between mutual recognition and mutual fear within the European area of Freedom, Security and Justice

    Directory of Open Access Journals (Sweden)

    Franco Impalà

    2005-12-01

    Full Text Available Italy was the last Member State to transpose the Framework Decision on the European Arrest Warrant. The Italian law entered into full force on 14 May 2005, a full sixteen months later than the appointed date. Conversely, whilst the Framework Decision aimed to speed up extradition between Member States, the Italian implementation law seems to complicate things, providing for dozens of new legal obstacles to surrender. In fact, the execution of an EAW in Italy threatens to become something highly unpredictable. The responsibility for this outcome is shared by the national and the European legislator. Perhaps the latter underestimated the seriousness of the conflict between Third Pillar law and domestic constitutional systems which aim to protect their acquis in the field of fundamental rights. Considering that many Member States seem to be struggling with similar problems, the first part of this article is devoted to describing the current scenario and analysing possible solutions at the supranational level, such as the establishment of a coherent system regulating the allocation of penal competences among Member States. In the next part, the problem of the Framework Decision’s incompatibility with the Italian Constitution will be discussed, and in the final part the Italian implementation law is analysed in more detail.

  6. A Study to Determine if Addition of Palatal Petechiae to Centor Criteria Adds More Significance to Clinical Diagnosis of Acute Strep Pharyngitis in Children

    Directory of Open Access Journals (Sweden)

    Kumara V. Nibhanipudi MD, FAAP, FAAEM

    2016-07-01

    Full Text Available Objective. A study to determine if addition of palatal petechiae to Centor criteria adds more value for clinical diagnosis of acute strep pharyngitis in children. Hypothesis. In children, Centor Criteria does not cover all the symptoms and signs of acute strep pharyngitis. We hypothesize that addition of palatal petechiae to Centor Criteria will increase the possibility of clinical diagnosis of group A streptococcal pharyngitis in children. Methods. One hundred patients with a complaint of sore throat were enrolled in the study. All the patients were examined clinically using the Centor Criteria. They were also examined for other signs and symptoms like petechial lesions over the palate, abdominal pain, and skin rash. All the patients were given rapid strep tests, and throat cultures were sent. No antibiotics were given until culture results were obtained. Results. The sample size was 100 patients. All 100 had fever, sore throat, and erythema of tonsils. Twenty of the 100 patients had tonsillar exudates, 85/100 had tender anterior cervical lymph nodes, and 86/100 had no cough. In total, 9 out of the 100 patients had positive throat cultures. We observed that petechiae over the palate, a very significant sign, is not included in the Centor Criteria. Palatal petechiae were present in 8 out of the 100 patients. Six out of these 8 with palatal petechiae had positive throat culture for strep (75%. Only 7 out of 20 with exudates had positive strep culture. Sixteen out of the 100 patients had rapid strep test positive. Those 84/100 who had negative rapid strep also had negative throat culture. Statistics. We used Fisher’s exact test, comparing throat culture positive and negative versus presence of exudates and palatal hemorrhages with positive and negative throat cultures and the resultant P value <.0001. Conclusion. Our study concludes that addition of petechiae over the palate to Centor Criteria will increase the possibility of diagnosing acute

  7. Modeling and experimental studies on intermittent starch feeding and citrate addition in simultaneous saccharification and fermentation of starch to flavor compounds.

    Science.gov (United States)

    Chavan, Abhijit R; Raghunathan, Anuradha; Venkatesh, K V

    2009-04-01

    Simultaneous saccharification and fermentation (SSF) is a combined process of saccharification of a renewable bioresource and fermentation process to produce products, such as lactic acid and ethanol. Recently, SSF has been extensively used to convert various sources of cellulose and starch into fermentative products. Here, we present a study on production of buttery flavors, namely diacetyl and acetoin, by growing Lactobacillus rhamnosus on a starch medium containing the enzyme glucoamylase. We further develop a structured kinetics for the SSF process, which includes enzyme and growth kinetics. The model was used to simulate the effect of pH and temperature on the SSF process so as to obtain optimum operating conditions. The model was experimentally verified by conducting SSF using an initial starch concentration of 100 g/L. The study demonstrated that the developed kinetic was able to suggest strategies for improved productivities. The developed model was able to accurately predict the enhanced productivity of flavors in a three stage process with intermittent addition of starch. Experimental and simulations demonstrated that citrate addition can also lead to enhanced productivity of flavors. The developed optimal model for SSF was able to capture the dynamics of SSF in batch mode as well as in a three stage process. The structured kinetics was also able to quantify the effect of multiple substrates present in the medium. The study demonstrated that structured kinetic models can be used in the future for design and optimization of SSF as a batch or a fed-batch process.

  8. Associations between Ultrasound Measures of Abdominal Fat Distribution and Indices of Glucose Metabolism in a Population at High Risk of Type 2 Diabetes: The ADDITION-PRO Study

    DEFF Research Database (Denmark)

    Philipsen, Annelotte; Jørgensen, Marit E; Vistisen, Dorte

    2015-01-01

    metabolism in a population at high risk of type 2 diabetes. METHODS: A cross-sectional analysis of 1342 participants of the ADDITION-PRO study. We measured visceral adipose tissue and subcutaneous adipose tissue with ultrasonography, anthropometrics and body fat percentage by bioelectrical impedance. Indices...... standard deviation difference in BMI, visceral adipose tissue, waist circumference, waist/height ratio and body fat percentage corresponded approximately to 0.2mmol/l higher fasting glucose, 0.7mmol/l higher 2-hr glucose, 0.06-0.1% higher HbA1c, 30 % lower HOMA index of insulin sensitivity, 20% lower Gutt...

  9. A pilot study to evaluate the safety and clinical performance of Leucopatch, an autologous, additive-free, platelet-rich fibrin for the treatment of recalcitrant chronic wounds

    DEFF Research Database (Denmark)

    Jørgensen, Bo; Karlsmark, Tonny; Vogensen, Hanne

    2011-01-01

    This prospective, uncontrolled pilot study evaluated the safety and clinical performance of Leucopatch an additive-free, autologous platelet-rich fibrin in the treatment of recalcitrant chronic wounds. Fifteen patients, with 16 lower extremity chronic wounds of varying etiologies were treated...... events. Two adverse events, one of noncompliance and one infection, were observed; neither was considered to be related to treatment. The results indicate that Leucopatch is easy to prepare and apply in the clinic, is safe, and may be a clinically effective treatment of recalcitrant chronic wounds....

  10. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  11. Additional effects of FDG-PET to thin-section CT for the differential diagnosis of lung nodules. A Japanese multicenter clinical study

    International Nuclear Information System (INIS)

    Kubota, Kazuo; Murakami, Koji; Inoue, Tomio; Saga, Tsuneo; Shiomi, Susumu

    2011-01-01

    This study was a controlled multicenter clinical study on patients with peripheral lung nodules to verify the improvement in the diagnostic ability of fluorodeoxyglucose-positron emission tomography (FDG-PET) when used in combination with thin-section CT (TS-CT). Patients with peripheral lung nodules (long maximal diameter: 10-30 mm) detected using CT were examined using TS-CT and FDG-PET for the differential diagnosis of benign or malignant lesions. The primary endpoint was the specificity of the results using a combination of TS-CT and FDG-PET, compared with the results for TS-CT alone. Images were interpreted by investigators at each institution. Blind readings were also performed by an independent image interpretation committee. The gold standard was a pathological diagnosis determined using a surgical or biopsy specimen obtained after PET; and the patients in whom a pathological diagnosis could not be obtained were diagnosed based on a follow-up TS-CT performed more than 6 months later. Adverse reactions to FDG were also evaluated. The blind reading results for 82 lesions in 81 subjects eligible for analysis among the 90 subjects included in the study showed a specificity of 91.2% (31/34) (95% confidence interval (CI): 76.3-98.1) for TS-CT + PET, compared with a specificity of 67.6% (23/34) (95% CI: 49.5-82.6) for TS-CT alone. The specificity was significantly improved by the addition of the PET findings (p<0.05). The sensitivity improved from 89.6% (43/48) for TS-CT to 91.7% (44/48) for TS-CT + PET; the addition of PET increased the level of confidence in the diagnosis, but the difference was not significant. The results reported by the institutional investigators were not significantly different. No serious adverse reactions occurred, although two of the 90 subjects exhibited mild adverse reactions. The addition of FDG-PET to TS-CT for the differential diagnosis of benign or malignant peripheral lung nodules resulted in a significant improvement in

  12. The Role of the Dynamic Sensory Perception in the Reformulation of Shakes: Use of TDS for Studying the Effect of Milk, Fiber, and Flavor Addition.

    Science.gov (United States)

    Tomadoni, Barbara; Fiszman, Susana; Moreira, María R; Tarrega, Amparo

    2018-01-01

    Various factors need to be taken into account when reformulating a food or beverage. The food components, not only macronutrients but also minor ingredients such as flavoring agents, could affect the perception of the sensory sensations, importantly their dynamic aspects, as rising and duration, which are not normally considered. The novelty of this approach is the study of the effects of the addition of several ingredients (fiber, extra milk powder, and strawberry flavoring) on the dynamic perception of a food item (strawberry shakes) using the temporal dominance of sensations (TDS) technique. The occurrence and duration of the key sensory sensations (acid, natural strawberry flavor, thick, sweet, candy strawberry flavor, and milk flavor) extracted from the TDS curves were analyzed and linked to the composition factors and liking and expectations of satiety scores. For example, the addition of flavoring increased the liking scores (increments ranging from 0.3 to 1.1) that was linked to the attenuation of acid sensation; and the addition of extra milk powder increased the expectation of satiety scores (increments ranging from 0.5 to 0.7) that was linked to the perception of early thick sensation in the mouth. In general, the more complex sensory profiles the higher liking and expectations of satiety. This work is a case study on how temporal sensory methods can contribute important information on the actual perception of food during consumption. Depending on the ingredients added these sensory properties appear at different times and with different dominance during evaluation affecting liking or fullness expectations. In consequence, the temporal sensory properties should be taken into account when designing or reformulating food. © 2017 Institute of Food Technologists®.

  13. Apheresis and intravenous immunoglobulins used in addition to conventional therapy to treat high-risk pregnant antiphospholipid antibody syndrome patients. A prospective study.

    Science.gov (United States)

    Ruffatti, Amelia; Favaro, Maria; Hoxha, Ariela; Zambon, Alessandra; Marson, Piero; Del Ross, Teresa; Calligaro, Antonia; Tonello, Marta; Nardelli, Giovanni B

    2016-06-01

    Pregnant women with triple antibody positive antiphospholipid syndrome (APS) who have had thrombosis or a history of early, severe pregnancy complications are generally considered at high risk of pregnancy loss. The objectives of this study were to investigate the efficacy and safety of a relatively new treatment protocol used in addition to conventional therapy in high-risk pregnant patients affected with primary APS. The study's two inclusion criteria were: (1) the presence of triple antiphospholipid positivity, (2) previous thrombosis and/or a history of one or more early, severe pregnancy complications. Eighteen pregnancies occurring between 2002 and 2015 in 14 APS patients, (mean age 34.8±3.6 SD) were monitored. All 14 (100%) patients had triple antiphospholipid positivity. In addition, six of them (42.8%) had a history of thrombosis, four (28.6%) had one or more previous early and severe pregnancy complications, and four (30.8%) met both clinical study criteria. The study protocol included weekly plasmapheresis or immunoadsorption and fortnightly 1g/kg intravenous immunoglobulins. Seventeen of the pregnancies (94.4%) produced live neonates, all born between the 26th and 37th weeks of gestation (mean 33.1±3.5 SD). One female (5.5%), born prematurely at 24 weeks, died of sepsis a week after birth. There were two cases (11.1%) of severe pregnancy complications. No treatment side effects were registered. Given the high live birth rate and the safety associated to it, the study protocol described here could be taken into consideration by medical teams treating high-risk APS pregnant patients. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  14. [Food additives and healthiness].

    Science.gov (United States)

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  15. Effect of vital bleaching with solutions containing different concentrations of hydrogen peroxide and pineapple extract as an additive on human enamel using reflectance spectrophotometer: An in vitro study.

    Science.gov (United States)

    Vejai Vekaash, Chitra Janardhanan; Kumar Reddy, Tripuravaram Vinay; Venkatesh, Kondas Vijay

    2017-01-01

    This study aims to evaluate the color change in human enamel bleached with three different concentrations of hydrogen peroxide, containing pineapple extract as an additive in two different timings, using reflectance spectrophotometer. The study aimed to investigate the bleaching efficacy on natural teeth using natural enzymes. Baseline color values of 10 randomly selected artificially stained incisors were obtained. The specimens were divided into three groups of 20 teeth each: Group 1 - 30% hydrogen peroxide, Group II - 20% hydrogen peroxide, and Group III - 10% hydrogen peroxide. One half of the tooth was bleached with hydrogen peroxide, and other was bleached with hydrogen peroxide and pineapple extract for 20 min (Subgroup A) and 10 min (Subgroup B). The results were statistically analyzed using student's t -test. The mean ΔE values of Group IA (31.62 ± 0.9), Group IIA (29.85 ± 1.2), and Group IIIA (28.65 ± 1.2) showed statistically significant higher values when compared to the mean Δ E values of Group 1A (25.02 ± 1.2), Group IIA (22.86 ± 1.1), and Group IIIA (16.56 ± 1.1). Identical results were obtained in Subgroup B. The addition of pineapple extract to hydrogen peroxide resulted in effective bleaching.

  16. Production of lipase and protease from an indigenous Pseudomonas aeruginosa strain and their evaluation as detergent additives: compatibility study with detergent ingredients and washing performance.

    Science.gov (United States)

    Grbavčić, Sanja; Bezbradica, Dejan; Izrael-Živković, Lidija; Avramović, Nataša; Milosavić, Nenad; Karadžić, Ivanka; Knežević-Jugović, Zorica

    2011-12-01

    An indigenous Pseudomonas aeruginosa strain has been studied for lipase and protease activities for their potential application in detergents. Produced enzymes were investigated in order to assess their compatibility with several surfactants, oxidizing agents and commercial detergents. The crude lipase appeared to retain high activity and stability in the presence of several surfactants and oxidizing agents and it was insusceptible to proteolysis. Lutensol® XP80 and Triton® X-100 strongly activated the lipase for a long period (up to 40 and 30% against the control after 1h) while the protease activity was enhanced by the addition of Triton® WR1339 and Tween® 80. The washing performance of the investigated surfactants was significantly improved with the addition of the crude enzyme preparation. Studies were further undertaken to improve enzymes production. The optimization of fermentation conditions led to an 8-fold increase of lipase production, while the production of protease was enhanced by 60%. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Tuning the probe location on zwitterionic micellar system with variation of pH and addition of surfactants with different alkyl chains: solvent and rotational relaxation studies.

    Science.gov (United States)

    Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Rao, Vishal Govind; Sarkar, Nilmoni

    2012-09-13

    In this manuscript, we have modulated the location of an anionic probe, Coumarin-343 (C-343) in a zwitterionic (N-hexadecyl-N,N-dimethylammonio-1-propanesulfonate (SB-16)) micellar system by three different approaches. The effect of addition of the surfactant sodium dodecyl sulfate (SDS) and the room temperature ionic liquid (RTIL), 1-ethyl-3-methylimidazolium octylsulfate (EmimOs) and N,N-dimethylethanol hexanoate (DAH), to the micellar solution has been studied. The effect of pH variation has been studied as well using solvent and rotational measurements. Migration of the anionic probe, C-343, from the palisade layer of SB-16 micelle to the bulk water has been observed to varying extents with the addition of SDS and EmimOs. The effect is much more pronounced in the presence of SDS and can be ascribed to the presence of the long alkyl (dodecyl) chain on SDS which can easily orient itself and fuse inside the SB-16 micelle and facilitate the observed migration of the probe molecule. This phenomenon is confirmed by faster solvation and rotational relaxation of the investigated probe molecule. The analogous fusion process is difficult in case of EmimOs and DAH because of their comparatively smaller alkyl (octyl and hexanoate) chain. However, the direction of C-343 migration is reversed with the decrease of pH of the SB-16 micellar medium. An increase in the average solvation and rotational relaxation time of the probe in acidic medium has been observed. Since experimental conditions are maintained such that the probe molecules and the zwitterionic SB-16 micelles remain oppositely charged, the observed results can be attributed to the increased electrostatic interaction (attractive) between them. Temperature dependent study also supports this finding.

  18. Additive effects of LPL, APOA5 and APOE variant combinations on triglyceride levels and hypertriglyceridemia: results of the ICARIA genetic sub-study

    Directory of Open Access Journals (Sweden)

    Valdivielso Pedro

    2010-04-01

    Full Text Available Abstract Background Hypertriglyceridemia (HTG is a well-established independent risk factor for cardiovascular disease and the influence of several genetic variants in genes related with triglyceride (TG metabolism has been described, including LPL, APOA5 and APOE. The combined analysis of these polymorphisms could produce clinically meaningful complementary information. Methods A subgroup of the ICARIA study comprising 1825 Spanish subjects (80% men, mean age 36 years was genotyped for the LPL-HindIII (rs320, S447X (rs328, D9N (rs1801177 and N291S (rs268 polymorphisms, the APOA5-S19W (rs3135506 and -1131T/C (rs662799 variants, and the APOE polymorphism (rs429358; rs7412 using PCR and restriction analysis and TaqMan assays. We used regression analyses to examine their combined effects on TG levels (with the log-transformed variable and the association of variant combinations with TG levels and hypertriglyceridemia (TG ≥ 1.69 mmol/L, including the covariates: gender, age, waist circumference, blood glucose, blood pressure, smoking and alcohol consumption. Results We found a significant lowering effect of the LPL-HindIII and S447X polymorphisms (p APOE-ε4 allele were significantly associated with an independent additive TG-raising effect (p p p p p p p = 0.042 and having one single raising polymorphism (OR = 1.20; 95% CI, 1.39-2.87; p p Conclusion Our results showed a significant independent additive effect on TG levels of the LPL polymorphisms HindIII, S447X, D9N and N291S; the S19W and -1131T/C variants of APOA5, and the ε4 allele of APOE in our study population. Moreover, some of the variant combinations studied were significantly associated with the absence or the presence of hypertriglyceridemia.

  19. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  20. A Comparative Study on Wear Properties of As Cast, Cast Aged and Forge Aged A356 Alloy with Addition of Grain Refiner and/or Modifier

    Directory of Open Access Journals (Sweden)

    D.G. Mallapur

    2015-03-01

    Full Text Available In the present work, a comparative wear behavior study of three categories of materials viz, as cast, cast aged (casting followed by T6 and forge aged (forging followed by T6 has been investigated. Neither melt treatment nor solid state processing (like aging and forging seems to be altering the wear behavior of the materials drastically. Cast aged A356 materials exhibit higher wear resistance compared to as cast and forge aged A356 materials. Further, it was observed that cast aged samples register lower coefficient of friction compared to other samples. It is also noted that the difference in wear behavior is revealed only at conditions of higher load, higher speed and longer sliding distance of testing. At lower regimes the difference is marginal. Among cast aged samples, ones treated with combined addition exhibit better wear resistance compared to other materials. Samples treated with combined addition register lowest coefficient of friction followed by samples treated with Sr, those with B, those with Ti and untreated ones. Abrasive wear mechanism is found to be operative in the regime of higher loading and higher velocity of sliding. Adhesive wear mechanism seems to be dominating the wear process at the lower regime of load and velocity of sliding.

  1. Clinical evaluation of the additive effect of diquafosol tetrasodium on sodium hyaluronate monotherapy in patients with dry eye syndrome: a prospective, randomized, multicenter study.

    Science.gov (United States)

    Kamiya, K; Nakanishi, M; Ishii, R; Kobashi, H; Igarashi, A; Sato, N; Shimizu, K

    2012-10-01

    To assess the additive effect of diquafosol tetrasodium on sodium hyaluronate monotherapy in patients with dry eye syndrome. This study evaluated 64 eyes of 32 patients (age: 62.6±12.8 years (mean±SD)) in whom treatment with 0.1% sodium hyaluronate was insufficiently responsive. The eyes were randomly assigned to one of the two regimens in each patient: topical administration of sodium hyaluronate and diquafosol tetrasodium in one eye, and that of sodium hyaluronate in the other. Before treatment, and 2 and 4 weeks after treatment, we determined tear volume, tear film break-up time (BUT), fluorescein and rose bengal vital staining scores, subjective symptoms, and adverse events. We found a significant improvement in BUT (P=0.049, Dunnett test), fluorescein and rose bengal staining scores (P=0.02), and in subjective symptoms (P=0.004 for dry eye sensation, P=0.02 for pain, and P=0.02 for foreign body sensation) 4 weeks after treatment in the diquafosol eyes. On the other hand, we found no significant change in these parameters after treatment in the control eyes. In dry eyes, where sodium hyaluronate monotherapy was insufficient, diquafosol tetrasodium was effective in improving objective and subjective symptoms, suggesting its viability as an option for the additive treatment of such eyes.

  2. Short communication: A laboratory study to validate the impact of the addition of Alnus nepalensis leaf litter on carbon and nutrients mineralization in soil

    Directory of Open Access Journals (Sweden)

    GAURAV MISHRA

    2016-04-01

    Full Text Available Abstract. Mishra G, Giri K, Dutta A, Hazarika S and Borgohain P. 2015. A laboratory study to validate the impact of the addition of Alnus nepalensis leaf litter on carbon and nutrients mineralization in soil. Nusantara Bioscience 8: 5-7. Plant litter or residues can be used as soil amendment to maintain the carbon stock and soil fertility. The amount and rate of mineralization depends on biochemical composition of plant litter. Alnus nepalensis (Alder is known for its symbiotic nitrogen fixation and capability to restore fertility of degraded lands. A laboratory incubation experiment was conducted for 60 days under controlled conditions to validate the carbon and nutrients mineralization potential of alder litter. Soil fertility indicators, i.e. soil organic carbon (SOC, available nitrogen (N, available phosphorus (P, and available potassium (K were analyzed using standard procedures. Significant differences were observed in the soil properties after addition of litter. Nutrient composition of alder litter was found superior by providing significantly higher organic matter and helped in better nutrient cycling. Therefore, alder based land use system may be replicated in other degraded lands or areas for productivity enhancement which is important for sustaining biodiversity and soil fertility.

  3. Both epistatic and additive effects of QTLs are involved in polygenic induced resistance to disease: a case study, the interaction pepper - Phytophthora capsici Leonian.

    Science.gov (United States)

    Lefebvre, V; Palloix, A

    1996-09-01

    To study the resistance of pepper to Phytophthora capsici, we analyzed 94 doubled-haploid (DH) lines derived from the intraspecific F1 hybrid obtained from a cross between Perennial, an Indian pungent resistant line, and Yolo Wonder, an American bell-pepper susceptible line, with 119 DNA markers. Four different criteria were used to evaluate the resistance, corresponding to different steps or mechanisms of the host-pathogen interaction: root-rot index, receptivity, inducibility and stability. Three distinct ANOVA models between DNA marker genotypes and the four disease criteria identified 13 genomic regions, distributed across several linkage groups or unlinked markers, affecting the resistance of pepper to P. capsici. Some QTLs were criterion specific, whereas others affect several criteria, so that the four resistance criteria were controlled by different combinations of QTLs. The QTLs were very different in their quantitative effect (R(2) values), including major QTLs which explained 41-55% of the phenotypic variance, intermediate QTLs with additive or/and epistatic action (17-28% of the variance explained) and minor QTLs. Favourable alleles of some minor QTLs were carried in the susceptible parent. The total phenotypic variation accounted for by QTLs reached up to 90% for receptivity, with an important part due to epistasis effects between QTLs (with or without additive effects). The relative impact of resistance QTLs in disease response is discussed.

  4. Study of Agronomical and Ecological Parameters of Additive and Replacement Intercropping Systems of Corn (Zea maize L. and Soybean (Glycine max L. Merr.

    Directory of Open Access Journals (Sweden)

    Issa Piri

    2017-12-01

    Full Text Available Introduction Intercropping is a multiple cropping agricultural practice involves growing two or more crops in close proximity. Intercropping of compatible plants also encourages biodiversity, by providing a habitat for a variety of insects and soil organisms that would not be present in a monocrop environment. This in turn can help limit outbreaks of crop pests by increasing predator biodiversity. Additionally, reducing the homogeneity of crops increases the barriers against biological dispersal of pests through the crops. Cereal–legume intercropping plays an important role in subsistence food production in developing countries, especially in the situations of limited resources. Nitrogen fixing legumes can be included to a greater extent in arable cropping systems via intercrops. Legumes contribute to maintaining the soil fertility via nitrogen fixation, which is increased in intercrops due to the more competitive character of the cereal for soil inorganic N. Ariel et al., (2013 showed that,Legume-Cereal Intercropping of corn and soybean may be advantageous compared to monocultures. Corn and soybean intercropping produce high yields of green matter and seed concentrates especially when the corn-soybean ratio is 1:2. Due to the importance of cereal–legume intercropping in the sustainability of agricultural systems, the objective of this study was to determine the effects of cereal-legume intercropping on the total biomass and grain yield and to find the best pattern of additive and replacement intercropping systems in Iranshahr Region. Material and Methods In order to study the agronomical and ecological parameters of additive and replacement intercropping systems of corn and soybean, a field experiment was conducted in 2012-13 in the south of Iranshahr city on a randomized complete block design with three replications. Treatments consisted of 8 different intercropping ratios: corn monoculture (C100S0 and soybean monoculture (C0S100 as sole

  5. Long-term growth responses of ash addition and liming - Preliminary results from a pilot study; Laangtidseffekter paa skogsproduktion efter askaaterfoering och kalkning - Preliminaera resultat fraan en pilotstudie

    Energy Technology Data Exchange (ETDEWEB)

    Sikstroem, Ulf; Jacobson, Staffan (Skogsbrukets Forskningsinstitut (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala (Sweden)); Johansson, Ulf (Swedish University of Agricultural Sciences, The Unit for field-based forest research, Box 17, SE-310 38 Simlaangsdalen (Sweden)); Kukkola, Mikko; Saarsalmi, Anna (Metla, P.O. Box 18, FIN-01301 Vantaa (Finland)); Holt-Hansen, Kjersti (Norsk Institutt for skog og landskap, P.B. 115, NO-1431 Aas (Norway))

    2009-04-15

    Under this pilot study with preliminary results revealed trends in the experimental material which indicated that the addition of ashes or lime in the coniferous forest on mineral soil can lead to reduced stem growth on land with low fertility, unchanged stem growth in medium productive land, while growth may increase land with high fertility. This applied to both periods of 5-15 years and in the longer term (17-23 years; lime). Hence, the hypothesis, regarding the growth being dependent on soil fertility expressed as fertility, could not be rejected. However, previously reported indications of a similar connection with the C/N ratio in the humus was not confirmed in this first evaluation of the material

  6. Study of the Adherence Mechanism Between the Metal and Inorganic Coating with Mill Addition of Li2Ni8O10 Nano Powder

    Institute of Scientific and Technical Information of China (English)

    QIAN Hui-chun; JIANG Wei-zhong

    2009-01-01

    The adherence strength between the metal and the inorganic coating can be greatly increased by mill addition of Li2Ni8O10,. The interface structure between metal and the inorganic coating with excellent adherence has been studied by investigating the chemical composition and the microstructure as well as elements valence bond on the interface with the help of scanning electron microscope (SEM), electron microprobe, and Auger electron spectroscope (AES). The results show that there is a non-stoichiometrical transitional layer on the interface between metal and the inorganic coating with excellent adherence, the adherence between metal and the non-stoichiometrical transitional layer is achieved by the metallic bond and the adherence between the non-stoichiometrical transitional layer and the inorganic coating is produced by ionic and covalent bond. The non-stoichiometrical transitional layer results in the strong adherence.

  7. Improving usability and pregnancy rates of a fertility monitor by an additional mobile application: results of a retrospective efficacy study of Daysy and DaysyView app.

    Science.gov (United States)

    Koch, Martin C; Lermann, Johannes; van de Roemer, Niels; Renner, Simone K; Burghaus, Stefanie; Hackl, Janina; Dittrich, Ralf; Kehl, Sven; Oppelt, Patricia G; Hildebrandt, Thomas; Hack, Caroline C; Pöhls, Uwe G; Renner, Stefan P; Thiel, Falk C

    2018-03-02

    Daysy is a fertility monitor that uses the fertility awareness method by tracking and analyzing the individual menstrual cycle. In addition, Daysy can be connected to the application DaysyView to transfer stored personal data from Daysy to a smartphone or tablet (IOS, Android). This combination is interesting because as it is shown in various studies, the use of apps is increasing patients´ focus on their disease or their health behavior. The aim of this study was to investigate if by the additional use of an App and thereby improved usability of the medical device, it is possible to enhance the typical-use related as well as the method-related pregnancy rates. In the resultant group of 125 women (2076 cycles in total), 2 women indicated that they had been unintentionally pregnant during the use of the device, giving a typical-use related Pearl-Index of 1.3. Counting only the pregnancies which occurred as a result of unprotected intercourse during the infertile (green) phase, we found 1 pregnancy, giving a method-related Pearl-Index of 0.6. Calculating the pregnancy rate resulting from continuous use and unprotected intercourse exclusively on green days, gives a perfect-use Pearl-Index of 0.8. It seems that combining a specific biosensor-embedded device (Daysy), which gives the method a very high repeatable accuracy, and a mobile application (DaysyView) which leads to higher user engagement, results in higher overall usability of the method.

  8. Randomized controlled trial to study the effect of dexamethasone as additive to ropivacaine on duration of ultrasound-guided transversus abdominis plane block in cesarean section

    Directory of Open Access Journals (Sweden)

    Jasleen Sachdeva

    2016-01-01

    Full Text Available Background: Transversus abdominis plane (TAP block is a regional anesthesia technique whose efficacy has been proven for postoperative pain relief after cesarean section (CS. Dexamethasone, a glucocorticoid, is now emerging as a new adjunct to local anesthetics for prolonging the duration of action and has been studied in different brachial plexus blocks. The primary outcome was to study the effect of dexamethasone as additive to ropivacaine on the duration of TAP block as assessed by time to first analgesic (TFA . The secondary outcome was total postoperative analgesic consumption, postoperative nausea and vomiting, and patient satisfaction. Method: This RCT was conducted on seventy American Society of Anesthesiology Grade I and II patients undergoing CS under subarachnoid block. Patients were randomly allocated to two groups comprising 35 patients each. Patients in Group I received ultrasound-guided bilateral TAP block at the end of surgery using 40 ml ropivacaine 0.2% and 2 ml saline, and patients in Group II received the block using 40 ml ropivacaine 0.2% and 2 ml (8 mg dexamethasone. Result: TFA was significantly longer in Group II (5.92 ± 1.02 vs. 3.11 ± 0.82 h, P = 0. Group II also had decreased tramadol requirement postoperatively (100.00 ± 0.00 vs. 140.00 ± 50.26 mg, P = 0.046. The incidence of nausea and vomiting was also lower (82.86% vs. 97.14%, P = 0.02318. The patient satisfaction with regard to pain relief was more (57.14% vs. 25.71%, P = 0.038. Conclusion: Addition of dexamethasone to ropivacaine in TAP block prolonged the duration of the block. There was no complication seen with TAP block in any of the patients.

  9. Study of agronomic characteristics and advantage indices in intercropping of additive series of Chickpea (Cicer arietinum L. and Black Cumin (Nigella sativa L.

    Directory of Open Access Journals (Sweden)

    esmaeil rezaei-chiyaneh

    2015-12-01

    Full Text Available Study of agronomic characteristics and advantage indices in intercropping of additive series of Chickpea (Cicer arietinum L. and Black Cumin (Nigella sativa L. Abstract In order to evaluate quantitive and qualitive yield of Chickpea (Cicer arietinum L. and Black Cumin (Nigella sativa L. in intercropping of additive series, a field experiment was arranged in a randomized complete block design with three replications in West Azerbaijan province- city Nagadeh, Iran during growing reason of 2012-2013. Treatments included 100% Black Cumin + 10% Chickpea, 100% Black Cumin + 20% Chickpea, 100% Black Cumin + 30% Chickpea, 100% Black Cumin + 40% Chickpea and 100% Black Cumin + 50% Chickpea and sole cropping of Chickpea and Black Cumin. Different Planting Ratio had significant effect on studied traits of Chickpea and Black Cumin (exception Essential oil yield of Black Cumin. Yield and components yield in monoculture of each crop was more than other treatments. The highest grain yield and biological yield of chickpea were achieved in monoculture with 1105 and 14479 kg.ha-1, respectively. The results showed that the maximum seed yield and biological yield of Black Cumin were obtained at monoculture with 750 and 2310 kg.ha-1, respectively. The highest of percentage of grain protein (23% and essential oil percentage (1.47% were related to treatment 100% Black Cumin + 50% Chickpea, respectively. Based on this results, the highest land equivalent ratio (LER=1.74, actual yield loss (AYL=6.45 and intercropping advantage (IA=1.70 were obtained by treatment 100% Black Cumin + 10% Chickpea, respectively. Therefore, it seems that treatment 100% Black Cumin + 10% Chickpea is remarkably effective to increase the economic income and land use efficiency.

  10. Sustained impact of a short small group course with systematic feedback in addition to regular clinical clerkship activities on musculoskeletal examination skills--a controlled study.

    Science.gov (United States)

    Perrig, Martin; Berendonk, Christoph; Rogausch, Anja; Beyeler, Christine

    2016-01-28

    The discrepancy between the extensive impact of musculoskeletal complaints and the common deficiencies in musculoskeletal examination skills lead to increased emphasis on structured teaching and assessment. However, studies of single interventions are scarce and little is known about the time-dependent effect of assisted learning in addition to a standard curriculum. We therefore evaluated the immediate and long-term impact of a small group course on musculoskeletal examination skills. All 48 Year 4 medical students of a 6 year curriculum, attending their 8 week clerkship of internal medicine at one University department in Berne, participated in this controlled study. Twenty-seven students were assigned to the intervention of a 6×1 h practical course (4-7 students, interactive hands-on examination of real patients; systematic, detailed feedback to each student by teacher, peers and patients). Twenty-one students took part in the regular clerkship activities only and served as controls. In all students clinical skills (CS, 9 items) were assessed in an Objective Structured Clinical Examination (OSCE) station, including specific musculoskeletal examination skills (MSES, 7 items) and interpersonal skills (IPS, 2 items). Two raters assessed the skills on a 4-point Likert scale at the beginning (T0), the end (T1) and 4-12 months after (T2) the clerkship. Statistical analyses included Friedman test, Wilcoxon rank sum test and Mann-Whitney U test. At T0 there were no significant differences between the intervention and control group. At T1 and T2 the control group showed no significant changes of CS, MSES and IPS compared to T0. In contrast, the intervention group significantly improved CS, MSES and IPS at T1 (p skills during regular clinical clerkship activities. However, an additional small group, interactive clinical skills course with feedback from various sources, improved these essential examination skills immediately after the teaching and several months later

  11. Effectiveness of various formulations of local anesthetics and additives for topical anesthesia – a prospective, randomized, double-blind, placebo-controlled study

    Directory of Open Access Journals (Sweden)

    Weilbach C

    2017-05-01

    Full Text Available Christian Weilbach,1 Christian Hoppe,2 Matthias Karst,3 Michael Winterhalter,4 Konstantinos Raymondos,3 Arthur Schultz,3 Niels Rahe-Meyer2 1Department of Anesthesiology, Intensive Care, Emergency Medicine and Pain Therapy, St. Josefs-Hospital Cloppenburg, Cloppenburg, 2Clinic for Anesthesiology and Operational Intensive Care, Franziskus Hospital Bielefeld, Bielefeld, 3Clinic for Anesthesiology and Intensive Care, Medizinische Hochschule Hannover, Hannover, 4Clinic for Anesthesiology and Pain Therapy, Klinikum Bremen-Mitte, Bremen, Germany Background: Topical anesthesia is used to control pain associated with many procedures in medicine. Today, the product most commonly applied for topical anesthesia in Germany is EMLA® (lidocaine/prilocaine. However, since prilocaine is a methemoglobin-inducing agent, there are limitations to its use, especially in neonates and infants. The aim of this study was to evaluate the effect of prilocaine and lidocaine as well as propylene glycol, a penetration enhancer, and trometamol, a buffer substance, in anesthetic creams.Patients and methods: Twenty-nine healthy adults participated in this study. Standardized creams with eight different compositions were applied and left for 20, 40 or 60 min. After exposure to standardized painful stimuli (blunt/sharp with pressures of 0.2, 0.4 or 0.8 N, subjects rated the experimental pain using a visual analog scale.Results: Significant results were only found with an exposure time of 60 min and a stamp pressure of 0.8 N. At a concentration of 20%, lidocaine was more effective compared to placebo and equally effective compared to lidocaine/prilocaine in controlling pain. The analgesic effect of the cream containing lidocaine 10% and additional trometamol was significantly superior to that of placebo and non-inferior to that of lidocaine/prilocaine. In this study, the penetration enhancer propylene glycol did not accelerate the onset of the analgesic effect. In contrast

  12. Polylactides in additive biomanufacturing.

    Science.gov (United States)

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Piloting the addition of contingency management to best practice counselling as an adjunct treatment for rural and remote disordered gamblers: study protocol

    Science.gov (United States)

    Christensen, Darren R; Witcher, Chad S G; Leighton, Trent; Hudson-Breen, Rebecca; Ofori-Dei, Samuel

    2018-01-01

    Introduction Problematic gambling is a significant Canadian public health concern that causes harm to the gambler, their families, and society. However, a significant minority of gambling treatment seekers drop out prior to the issue being resolved; those with higher impulsivity scores have the highest drop-out rates. Consequently, retention is a major concern for treatment providers. The aim of this study is to investigate the efficacy of internet-delivered cognitive behavioural therapy (CBT) and internet-delivered CBT and contingency management (CM+) as treatments for gambling disorder in rural Albertan populations. Contingency management (CM) is a successful treatment approach for substance dependence that uses small incentives to reinforce abstinence. This approach may be suitable for the treatment of gambling disorder. Furthermore, internet-delivered CM may hold particular promise in rural contexts, as these communities typically struggle to access traditional clinic-based counselling opportunities. Methods and analysis 54 adults with gambling disorder will be randomised into one of two conditions: CM and CBT (CM+) or CBT alone (CBT). Gambling will be assessed at intake, every treatment session, post-treatment, and follow-up. The primary outcome measures are treatment attendance, gambling abstinence, gambling, gambling symptomatology, and gambling urge. In addition, qualitative interviews assessing study experiences will be conducted with the supervising counsellor, graduate student counsellors, study affiliates, and a subset of treatment seekers. This is the first study to use CM as a treatment for gambling disorder in rural and remote populations. Ethics and dissemination This study was approved by the University of Lethbridge’s Human Subject Research Committee (#2016–080). The investigators plan to publish the results from this study in academic peer-reviewed journals. Summary information will be provided to the funder. Trial registration number NCT

  14. Piloting the addition of contingency management to best practice counselling as an adjunct treatment for rural and remote disordered gamblers: study protocol.

    Science.gov (United States)

    Christensen, Darren R; Witcher, Chad S G; Leighton, Trent; Hudson-Breen, Rebecca; Ofori-Dei, Samuel

    2018-04-03

    Problematic gambling is a significant Canadian public health concern that causes harm to the gambler, their families, and society. However, a significant minority of gambling treatment seekers drop out prior to the issue being resolved; those with higher impulsivity scores have the highest drop-out rates. Consequently, retention is a major concern for treatment providers. The aim of this study is to investigate the efficacy of internet-delivered cognitive behavioural therapy (CBT) and internet-delivered CBT and contingency management (CM+) as treatments for gambling disorder in rural Albertan populations. Contingency management (CM) is a successful treatment approach for substance dependence that uses small incentives to reinforce abstinence. This approach may be suitable for the treatment of gambling disorder. Furthermore, internet-delivered CM may hold particular promise in rural contexts, as these communities typically struggle to access traditional clinic-based counselling opportunities. 54 adults with gambling disorder will be randomised into one of two conditions: CM and CBT (CM+) or CBT alone (CBT). Gambling will be assessed at intake, every treatment session, post-treatment, and follow-up. The primary outcome measures are treatment attendance, gambling abstinence, gambling, gambling symptomatology, and gambling urge. In addition, qualitative interviews assessing study experiences will be conducted with the supervising counsellor, graduate student counsellors, study affiliates, and a subset of treatment seekers. This is the first study to use CM as a treatment for gambling disorder in rural and remote populations. This study was approved by the University of Lethbridge's Human Subject Research Committee (#2016-080). The investigators plan to publish the results from this study in academic peer-reviewed journals. Summary information will be provided to the funder. NCT02953899; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in

  15. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  16. Use of tracer techniques for studying the influence of addition elements and crystallographic parameters on intergranular diffusion in austenitic stainless steels

    International Nuclear Information System (INIS)

    Assassa, Wafaa.

    1975-01-01

    16% chromium, 14% nickel stainless steel, austenitic at all temperatures, covers a wide field of industrial use. Its behavior was studied in order to find out more about how impurities affect the three basic elements forming the solid solution. After a review of some general properties (segregation, precipitation, migration, structure and energy of boundaries) the physico-chemical aspect of the grain boundaries was investigated. The atomic diffusion rates of the three basic elements forming the solid-solution were compared in order to evaluate their mutual kinetics and the effects of impurities such as C, Si or addition elements such as Ni were studied. The radiotracer technique was used ( 59 Fe, 51 Cr, 63 Ni). The structural aspect of the grain boundaries of this type of steel was then examined by analyzing the self-diffusion of iron in preoriented bicrystals and considering the properties of the boundaries parallel with and perpendicular to the (001) bending axis. A study was devoted to the effect of a new structural parameter, asymmetry of the grain boundaries, little analyzed in diffusion [fr

  17. Prevalence of Food Additive Intolerance

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard

    1994-01-01

    The prevalence estimates vary with a factor 100. As the results vary so do the study populations. 6 If the different study populations are accounted for, a common conclusion can be drawn: Food additive intolerance is found in adults with atopic symptoms from the respiratory tract and skin. The prevalence......1 The existing prevalence estimates of food additive intolerance(1-4) are being reviewed. 2 In the EEC report the estimated frequency of food additive intolerance is 0.03% to 0.15% based on data from patient groups. 3 The British population study results in a prevalence estimate of 0.......026%. The challenged population is 81 children and adults with a history of reproducible clinical symptoms after ingestion of food additives. 4 In the Danish population study a prevalence of 1-2% is found in children age 5-16. In this study a total of 606 children mainly with atopic disease have been challenged. 5...

  18. Red cell storage in E-Sol 5 and Adsol additive solutions: paired comparison using mixed and non-mixed study designs.

    Science.gov (United States)

    Radwanski, K; Thill, M; Min, K

    2014-05-01

    If transfusion of older stored red cells is found to negatively affect clinical outcome, one possible alternative to shortened outdate is the use of new additive solutions (AS) that ameliorate the storage lesion. Erythro-Sol (E-Sol), a previously developed next-generation AS, has been reformulated into E-Sol 5, which is compatible with current anticoagulants and AS volumes. The effect of E-Sol 5 on red cells during storage compared to current AS has not been reported. Paired, ABO-matched whole-blood units were collected into CPD anticoagulant, pooled, split and processed into plasma and red cell units with either 110 ml of Adsol or 105 ml of E-Sol 5 within 8 h of collection. In Study 1, paired units in E-Sol 5 and Adsol were sampled on Day 0 and every 7 days up to Day 42 (n = 10). In Study 2, paired units in E-Sol 5 and Adsol were sampled only on Day 0 and Day 42 (n = 10). In Study 1, 2,3 DPG levels were maintained until Day 28 in E-Sol 5 units and Day 14 in Adsol units. ATP levels were higher in E-Sol 5 units until Day 21, after which they were comparable between the two groups. In both studies, metabolic activity was greater in E-Sol 5 units with respect to glucose consumption and lactate production. Morphology scores were higher, and haemolysis and microparticles generated were lower in E-Sol 5 vs. Adsol units. Weekly mixing of units lowered haemolysis and microparticle levels and increased potassium content on Day 42 in both additive solutions. Regardless of whether units are mixed weekly or are stored non-mixed, E-Sol 5 slows the progression of the red cell storage lesion and improves the overall in vitro quality of RBC throughout storage. © 2013 International Society of Blood Transfusion.

  19. Study design and percent recoveries of anthropogenic organic compounds with and without the addition of ascorbic acid to preserve water samples containing free chlorine, 2004-06

    Science.gov (United States)

    Valder, Joshua F.; Delzer, Gregory C.; Price, Curtis V.; Sandstrom, Mark W.

    2008-01-01

    The National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey (USGS) began implementing Source Water-Quality Assessments (SWQAs) in 2002 that focus on characterizing the quality of source water and finished water of aquifers and major rivers used by some of the larger community water systems in the United States. As used for SWQA studies, source water is the raw (ambient) water collected at the supply well prior to water treatment (for ground water) or the raw (ambient) water collected from the river near the intake (for surface water). Finished water is the water that is treated, which typically involves, in part, the addition of chlorine or other disinfection chemicals to remove pathogens, and is ready to be delivered to consumers. Finished water is collected before the water enters the distribution system. This report describes the study design and percent recoveries of anthropogenic organic compounds (AOCs) with and without the addition of ascorbic acid to preserve water samples containing free chlorine. The percent recoveries were determined by using analytical results from a laboratory study conducted in 2004 by the USGS's National Water Quality Laboratory (NWQL) and from data collected during 2004-06 for a field study currently (2008) being conducted by the USGS's NAWQA Program. The laboratory study was designed to determine if preserving samples with ascorbic acid (quenching samples) adversely affects analytical performance under controlled conditions. During the laboratory study, eight samples of reagent water were spiked for each of five analytical schedules evaluated. Percent recoveries from these samples were then compared in two ways: (1) four quenched reagent spiked samples analyzed on day 0 were compared with four quenched reagent spiked samples analyzed on day 7 or 14, and (2) the combined eight quenched reagent spiked samples analyzed on day 0, 7, or 14 were compared with eight laboratory reagent spikes (LRSs). Percent

  20. Additive and polynomial representations

    CERN Document Server

    Krantz, David H; Suppes, Patrick

    1971-01-01

    Additive and Polynomial Representations deals with major representation theorems in which the qualitative structure is reflected as some polynomial function of one or more numerical functions defined on the basic entities. Examples are additive expressions of a single measure (such as the probability of disjoint events being the sum of their probabilities), and additive expressions of two measures (such as the logarithm of momentum being the sum of log mass and log velocity terms). The book describes the three basic procedures of fundamental measurement as the mathematical pivot, as the utiliz

  1. Genetic predisposition to coronary heart disease and stroke using an additive genetic risk score: A population-based study in Greece

    Science.gov (United States)

    Yiannakouris, N.; Katsoulis, M.; Dilis, V.; Parnell, L.D.; Trichopoulos, D.; Ordovas, J.M.; Trichopoulou, A.

    2012-01-01

    Objective To determine the extent to which the risk for incident coronary heart disease (CHD) increases in relation to a genetic risk score (GRS) that additively integrates the influence of high-risk alleles in nine documented single nucleotide polymorphisms (SNPs) for CHD, and to examine whether this GRS also predicts incident stroke. Methods Genotypes at nine CHD-relevant SNPs were determined in 494 cases of incident CHD, 320 cases of incident stroke and 1345 unaffected controls drawn from the population-based Greek component of the European Prospective Investigation into Cancer and nutrition (EPIC) cohort. An additive GRS was calculated for each study participant by adding one unit for the presence of each high-risk allele multiplied by the estimated effect size of that allele in the discovery samples. Statistical analysis was performed using logistic regression. Results The GRS was significantly associated with the incidence of CHD where the odds of CHD incidence in the highest quintile of the GRS were 1.74 times higher (95% confidence interval [CI] = 1.25–2.43, p for trend = 0.0004), compared to the lowest quintile. With respect to stroke, a weaker and non-significant positive association with GRS was apparent as the odds of stroke incidence in the highest quintile of the GRS were 1.36 times higher (95% CI = 0.90–2.06, p for trend = 0.188), compared to the lowest quintile. Conclusion A GRS relying on nine documented “CHD-specific” SNPs is significantly predictive of CHD but it was not found to be statistically significantly associated with incident stroke. PMID:22429504

  2. Adductor canal block for post-operative analgesia after simultaneous bilateral total knee replacement: A randomised controlled trial to study the effect of addition of dexmedetomidine to ropivacaine

    Directory of Open Access Journals (Sweden)

    Rakhee Goyal

    2017-01-01

    Full Text Available Background and Aims: Knee replacement surgery causes tremendous post-operative pain and adductor canal block (ACB is used for post-operative analgesia. This is a randomised, controlled, three-arm parallel group study using different doses of dexmedetomidine added to ropiavcaine for ACB. Methods: A total of 150 patients aged 18–75 years, scheduled for simultaneous bilateral total knee replacement, received ultrasound-guided ACB. They were randomised into three groups -Group A received ACB with plain ropivacaine; Groups B and C received ACB with ropivacaine and addition of dexmedetomidine 0.25 μg/kg and 0.50 μg/kg, respectively, on each side of ACB. The primary outcome was the duration of analgesia. Total opioid consumption, success of early ambulation, and level of patient satisfaction were also assessed. Results: The patient characteristics and block success rates were comparable in all groups. Group C patients had longer duration of analgesia (Group C 18.4 h ± 7.4; Group B 14.6 ± 7.1; Group A 10.8 ± 7; P < 0.001; lesser tramadol consumption (Group C 43.8 mg ± 53.2; Group B 76.4 ± 49.6; Group A 93.9 mg ± 58.3; P < 0.001 and lesser pain on movement (P < 0.001. The patients in Group B and C walked more steps than in Group A (P < 0.002. The level of patient satisfaction was highest in Group C (P < 0.001. Conclusions: The addition of dexmedetomidine to ropivacaine resulted in longer duration of analgesia after adductor canal block for simultaneous bilateral total knee replacement surgery.

  3. The Addition of an Immunosuppressant After Loss of Response to Anti-TNFα Monotherapy in Inflammatory Bowel Disease: A 2-Year Study.

    Science.gov (United States)

    Macaluso, Fabio Salvatore; Sapienza, Chiara; Ventimiglia, Marco; Renna, Sara; Rizzuto, Giulia; Orlando, Rosalba; Di Pisa, Marta; Affronti, Marco; Orlando, Emanuele; Cottone, Mario; Orlando, Ambrogio

    2018-01-18

    The addition of an immunosuppressant (IM) after loss of response to anti-TNFα monotherapy is an emerging strategy of therapeutic optimization in patients with inflammatory bowel disease (IBD). However, few clinical data have been reported to date. We aimed to evaluate the efficacy and safety of this selective combination therapy in patients with IBD. All consecutive patients with loss of response to anti-TNFα monotherapy despite an intensive dose optimization who added an IM from October 2014 to October 2016 were entered into a prospective database. Among 630 patients treated with anti-TNFα agents during the study period, 46 (7.3%) added an IM. A total of 31 patients (67.4%) were treated with an intravenous anti-TNFα (infliximab, as originator or biosimilar), while 15 (32.6%) were treated with a subcutaneous anti-TNFα agent (10 adalimumab and 5 golimumab). The mean duration of follow-up was 12.8 ± 7.3 months. Twenty-one patients (45.7%) remained on combination therapy at the end of follow-up: 15 (32.6%) maintained a steroid-free remission, and 6 (13.0%) achieved a clinical response. In patients who experienced treatment success, the median value of C-reactive protein decreased from baseline to the end of follow-up (13.2 vs 3.0, P = 0.01; normal values <5 mg/L). Adverse events leading to treatment discontinuation were reported in 8 out of 46 patients (17.4%). In the largest cohort on this argument reported to date, the addition of an IM was an effective and safe optimization strategy after loss of response to anti-TNFα monotherapy. Low doses of IM were sufficient to achieve a clinical response. © 2018 Crohn’s & Colitis Foundation of America. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  4. A randomized trial of the effect of a plant-based dietary pattern on additional breast cancer events and survival: the Women's Healthy Eating and Living (WHEL) Study.

    Science.gov (United States)

    Pierce, John P; Faerber, Susan; Wright, Fred A; Rock, Cheryl L; Newman, Vicky; Flatt, Shirley W; Kealey, Sheila; Jones, Vicky E; Caan, Bette J; Gold, Ellen B; Haan, Mary; Hollenbach, Kathryn A; Jones, Lovell; Marshall, James R; Ritenbaugh, Cheryl; Stefanick, Marcia L; Thomson, Cynthia; Wasserman, Linda; Natarajan, Loki; Thomas, Ronald G; Gilpin, Elizabeth A

    2002-12-01

    The Women's Healthy Eating and Living (WHEL) Study is a multisite randomized controlled trial of the effectiveness of a high-vegetable, low-fat diet, aimed at markedly raising circulating carotenoid concentrations from food sources, in reducing additional breast cancer events and early death in women with early-stage invasive breast cancer (within 4 years of diagnosis). The study randomly assigned 3088 such women to an intensive diet intervention or to a comparison group between 1995 and 2000 and is expected to follow them through 2006. Two thirds of these women were under 55 years of age at randomization. This research study has a coordinating center and seven clinical sites. Randomization was stratified by age, stage of tumor and clinical site. A comprehensive intervention program that includes intensive telephone counseling, cooking classes and print materials helps shift the dietary pattern of women in the intervention. Through an innovative telephone counseling program, dietary counselors encourage women in the intervention group to meet the following daily behavioral targets: five vegetable servings, 16 ounces of vegetable juice, three fruit servings, 30 g of fiber and 15-20% energy from fat. Adherence assessments occur at baseline, 6, 12, 24 or 36, 48 and 72 months. These assessments can include dietary intake (repeated 24-hour dietary recalls and food frequency questionnaire), circulating carotenoid concentrations, physical measures and questionnaires about health symptoms, quality of life, personal habits and lifestyle patterns. Outcome assessments are completed by telephone interview every 6 months with medical record verification. We will assess evidence of effectiveness by the length of the breast cancer event-free interval, as well as by overall survival separately in all the women in the study as well as specifically in women under and over the age of 55 years.

  5. Cellulolytic potential of probiotic Bacillus Subtilis AMS6 isolated from traditional fermented soybean (Churpi): An in-vitro study with regards to application as an animal feed additive.

    Science.gov (United States)

    Manhar, Ajay K; Bashir, Yasir; Saikia, Devabrata; Nath, Dhrubajyoti; Gupta, Kuldeep; Konwar, Bolin K; Kumar, Rahul; Namsa, Nima D; Mandal, Manabendra

    2016-01-01

    The aim of the present study is to evaluate the probiotic attributes of Bacillus subtilis AMS6 isolated from fermented soybean (Churpi). This isolate exhibited tolerance to low pH (pH 2.0) and bile salt (0.3%), capability to autoaggregate and coaggregate. AMS6 also showed highest antibacterial activity against the pathogenic indicator strain Salmonella enterica typhimurium (MTCC 1252) and susceptibility towards different antibiotics tested. The isolate was effective in inhibiting the adherence of food borne pathogens to Caco-2 epithelial cell lines, and was also found to be non-hemolytic which further strengthen the candidature of the isolate as a potential probiotic. Further studies revealed B. subtilis AMS6 showed cellulolytic activity (0.54±0.05 filter paper units mL(-1)) at 37°C. The isolate was found to hydrolyze carboxymethyl cellulose, filter paper and maize (Zea mays) straw. The maize straw digestion was confirmed by scanning electron microscopy studies. The isolate was able to degrade filter paper within 96h of incubation. A full length cellulase gene of AMS6 was amplified using degenerate primers consisting of 1499 nucleotides. The ORF encoded for a protein of 499 amino acids residues with a predicted molecular mass of 55.04kDa. The amino acids sequence consisted of a glycosyl hydrolase family 5 domain at N-terminal; Glycosyl hydrolase catalytic core and a CBM-3 cellulose binding domain at its C terminal. The study suggests potential probiotic B. subtilis AMS6 as a promising candidate envisaging its application as an animal feed additive for enhanced fiber digestion and gut health of animal. Copyright © 2016 Elsevier GmbH. All rights reserved.

  6. Additional Cost Because of Pneumonia in Nursing Home Residents: Results From the Incidence of Pneumonia and Related Consequences in Nursing Home Resident Study.

    Science.gov (United States)

    Costa, Nadège; Hoogendijk, Emiel O; Mounié, Michael; Bourrel, Robert; Rolland, Yves; Vellas, Bruno; Molinier, Laurent; Cesari, Matteo

    2017-05-01

    Pneumonia is a frequent condition in older people. Our aim was to examine the total healthcare cost related to pneumonia in nursing home (NH) residents over a 1-year follow-up period. This was a prospective, longitudinal, observational, and multicenter study that was a part of the Incidence of Pneumonia and related Consequences in Nursing Home Resident study. Thirteen NHs located in Languedoc Roussillon and Midi-Pyrénées regions in France were included. Resident in NH, older than 60 years and had a group iso-resource score ranging from 2 to 5. Pneumonia events were characterized according to the Observatoire du Risque Infectieux en Geriatrie criteria. Direct medical and nonmedical costs were assessed from the French health insurance perspective. Healthcare resources was retrospectively gathered from the French Social Health Insurance database and valued using the tariffs reimbursed by the French health insurance. Sociodemographic variables, clinical factors, vaccinations, cognition, depression, functional status, frailty index, as well as group iso-resource score were also recorded. Among the 800 patients initially included in the Incidence of Pneumonia and Related Consequences in Nursing Home Resident study, 345 which were listed in the database of the French Social Health Insurance were included in this economic study. Among them, 64 (18%) experienced at least 1 episode of pneumonia during the 1-year follow-up period. Mean annual total additional cost for a patient who experienced at least 1 episode of pneumonia during the 1 year follow-up period is 2813€. On average, total annual costs increased by 60% to 93% when a patient experienced at least 1 episode of pneumonia. NH-acquired pneumonia has a great impact on total cost of care for NH residents. Our results suggest the potential economic savings that could be achieved if pneumonia could be prevented in NHs. Copyright © 2017. Published by Elsevier Inc.

  7. Evidence of a major locus for lipoprotein lipase (LPL) activity in addition to a pleiotropic locus for both LPL and fasting insulin: results from the HERITAGE Family Study.

    Science.gov (United States)

    Hong, Y; Rice, T; Després, J P; Gagnon, J; Nadeau, A; Bergeron, J; Pérusse, L; Bouchard, C; Leon, A S; Skinner, J S; Wilmore, J H; Rao, D C

    1999-06-01

    A major gene hypothesis for heparin releasable plasma lipoprotein lipase (PH-LPL) activity was assessed using segregation analyses of data on 495 members in 98 normolipidemic sedentary families of Caucasian descent who participated in the HERITAGE Family Study. Segregation analyses were performed on PH-LPL adjusted for age, and on PH-LPL activity adjusted for age and fasting insulin. Prior to adjustment for insulin, neither a major gene effect nor a multifactorial component could be rejected, and support for a major gene was equivocal i.e. neither the Mendelian transmission nor the no transmission (equal tau s) models were rejected. However, after adjusting for the effects of insulin, a major gene effect on PH-LPL activity was unambiguous. The putative locus accounted for 60% of the total phenotypic variance, and the homozygous recessive form affected 10% (q2) of the sample (i.e. gene frequency (q) = 0.31), and led to a low PH-LPL value. The lack of a significant multifactorial effect suggested that the familial etiology of PH-LPL activity adjusted for insulin was likely to be primarily a function of the major locus. In conclusion, the present study is the first to report segregation analyses on PH-LPL activity prior to and after adjusting for insulin, and suggests that there is an indication of a pleiotropic genetic effect on PH-LPL activity and insulin, in addition to a major gene effect on PH-LPL activity alone.

  8. Food Additives and Hyperkinesis

    Science.gov (United States)

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  9. Groups – Additive Notation

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2015-06-01

    Full Text Available We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  10. Groups – Additive Notation

    OpenAIRE

    Coghetto Roland

    2015-01-01

    We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  11. A validated LC-MS/MS determination method for the illegal food additive rhodamine B: Applications of a pharmacokinetic study in rats.

    Science.gov (United States)

    Cheng, Yung-Yi; Tsai, Tung-Hu

    2016-06-05

    Rhodamine B is an illegal and potentially carcinogenic food dye. The aim of this study was to develop a convenient, rapid, and sensitive UHPLC-MS/MS method for pharmacokinetic studies in rats. Rat plasma samples were deproteinized with acetonitrile and separated by UHPLC on a reverse-phase C18e column (100mm×2.1mm, 2μm) using a mobile phase consisting of methanol-5mM ammonium acetate (90:10, v/v). Detection was performed using a triple quadrupole tandem mass spectrometer in the selected reaction monitoring mode at [M](+) ion m/z 443.39→399.28 for rhodamine B and [M+H](+) ion m/z 253.17→238.02 for 5-methoxyflavone as the internal standard. This method was specific and produced linear results over a concentration range of 0.5-100ng/mL, with a lower limit of quantitation of 0.5ng/mL. All validation parameters, including the inter-day, intra-day, matrix effect, recovery, and stability in rat plasma, were acceptable according to the biological method validation guidelines developed by the FDA (2001). This method was successfully applied to a pharmacokinetic study in rats; oral administration of 1mg/kg of rhodamine B yielded a time to maximum concentration (Tmax) of 1.3±0.4h and an elimination half-life of 8.8±1.4h, with a clearance of 229.7±19.4mL/h/kg. These pharmacokinetic results provide a constructive contribution to our understanding of the absorption mechanism of rhodamine B and support additional food safety evaluations. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Multi-site study of additive genetic effects on fractional anisotropy of cerebral white matter: comparing meta and mega analytical approaches for data pooling

    Science.gov (United States)

    Kochunov, Peter; Jahanshad, Neda; Sprooten, Emma; Nichols, Thomas E.; Mandl, René C.; Almasy, Laura; Booth, Tom; Brouwer, Rachel M.; Curran, Joanne E.; de Zubicaray, Greig I.; Dimitrova, Rali; Duggirala, Ravi; Fox, Peter T.; Hong, L. Elliot; Landman, Bennett A.; Lemaitre, Hervé; Lopez, Lorna; Martin, Nicholas G.; McMahon, Katie L.; Mitchell, Braxton D.; Olvera, Rene L.; Peterson, Charles P.; Starr, John M.; Sussmann, Jessika E.; Toga, Arthur W.; Wardlaw, Joanna M.; Wright, Margaret J.; Wright, Susan N.; Bastin, Mark E.; McIntosh, Andrew M.; Boomsma, Dorret I.; Kahn, René S.; den Braber, Anouk; de Geus, Eco JC; Deary, Ian J.; Hulshoff Pol, Hilleke E.; Williamson, Douglas E.; Blangero, John; van ’t Ent, Dennis; Thompson, Paul M.; Glahn, David C.

    2014-01-01

    Combining datasets across independent studies can boost statistical power by increasing the numbers of observations and can achieve more accurate estimates of effect sizes. This is especially important for genetic studies where a large number of observations are required to obtain sufficient power to detect and replicate genetic effects. There is a need to develop and evaluate methods for joint-analytical analyses of rich datasets collected in imaging genetics studies. The ENIGMA-DTI consortium is developing and evaluating approaches for obtaining pooled estimates of heritability through meta-and mega-genetic analytical approaches, to estimate the general additive genetic contributions to the intersubject variance in fractional anisotropy (FA) measured from diffusion tensor imaging (DTI). We used the ENIGMA-DTI data harmonization protocol for uniform processing of DTI data from multiple sites. We evaluated this protocol in five family-based cohorts providing data from a total of 2248 children and adults (ages: 9–85) collected with various imaging protocols. We used the imaging genetics analysis tool, SOLAR-Eclipse, to combine twin and family data from Dutch, Australian and Mexican-American cohorts into one large “mega-family”. We showed that heritability estimates may vary from one cohort to another. We used two meta-analytical (the sample-size and standard-error weighted) approaches and a mega-genetic analysis to calculate heritability estimates across-population. We performed leave-one-out analysis of the joint estimates of heritability, removing a different cohort each time to understand the estimate variability. Overall, meta- and mega-genetic analyses of heritability produced robust estimates of heritability. PMID:24657781

  13. Multi-site study of additive genetic effects on fractional anisotropy of cerebral white matter: Comparing meta and megaanalytical approaches for data pooling.

    Science.gov (United States)

    Kochunov, Peter; Jahanshad, Neda; Sprooten, Emma; Nichols, Thomas E; Mandl, René C; Almasy, Laura; Booth, Tom; Brouwer, Rachel M; Curran, Joanne E; de Zubicaray, Greig I; Dimitrova, Rali; Duggirala, Ravi; Fox, Peter T; Hong, L Elliot; Landman, Bennett A; Lemaitre, Hervé; Lopez, Lorna M; Martin, Nicholas G; McMahon, Katie L; Mitchell, Braxton D; Olvera, Rene L; Peterson, Charles P; Starr, John M; Sussmann, Jessika E; Toga, Arthur W; Wardlaw, Joanna M; Wright, Margaret J; Wright, Susan N; Bastin, Mark E; McIntosh, Andrew M; Boomsma, Dorret I; Kahn, René S; den Braber, Anouk; de Geus, Eco J C; Deary, Ian J; Hulshoff Pol, Hilleke E; Williamson, Douglas E; Blangero, John; van 't Ent, Dennis; Thompson, Paul M; Glahn, David C

    2014-07-15

    Combining datasets across independent studies can boost statistical power by increasing the numbers of observations and can achieve more accurate estimates of effect sizes. This is especially important for genetic studies where a large number of observations are required to obtain sufficient power to detect and replicate genetic effects. There is a need to develop and evaluate methods for joint-analytical analyses of rich datasets collected in imaging genetics studies. The ENIGMA-DTI consortium is developing and evaluating approaches for obtaining pooled estimates of heritability through meta-and mega-genetic analytical approaches, to estimate the general additive genetic contributions to the intersubject variance in fractional anisotropy (FA) measured from diffusion tensor imaging (DTI). We used the ENIGMA-DTI data harmonization protocol for uniform processing of DTI data from multiple sites. We evaluated this protocol in five family-based cohorts providing data from a total of 2248 children and adults (ages: 9-85) collected with various imaging protocols. We used the imaging genetics analysis tool, SOLAR-Eclipse, to combine twin and family data from Dutch, Australian and Mexican-American cohorts into one large "mega-family". We showed that heritability estimates may vary from one cohort to another. We used two meta-analytical (the sample-size and standard-error weighted) approaches and a mega-genetic analysis to calculate heritability estimates across-population. We performed leave-one-out analysis of the joint estimates of heritability, removing a different cohort each time to understand the estimate variability. Overall, meta- and mega-genetic analyses of heritability produced robust estimates of heritability. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Implementing Generalized Additive Models to Estimate the Expected Value of Sample Information in a Microsimulation Model: Results of Three Case Studies.

    Science.gov (United States)

    Rabideau, Dustin J; Pei, Pamela P; Walensky, Rochelle P; Zheng, Amy; Parker, Robert A

    2018-02-01

    The expected value of sample information (EVSI) can help prioritize research but its application is hampered by computational infeasibility, especially for complex models. We investigated an approach by Strong and colleagues to estimate EVSI by applying generalized additive models (GAM) to results generated from a probabilistic sensitivity analysis (PSA). For 3 potential HIV prevention and treatment strategies, we estimated life expectancy and lifetime costs using the Cost-effectiveness of Preventing AIDS Complications (CEPAC) model, a complex patient-level microsimulation model of HIV progression. We fitted a GAM-a flexible regression model that estimates the functional form as part of the model fitting process-to the incremental net monetary benefits obtained from the CEPAC PSA. For each case study, we calculated the expected value of partial perfect information (EVPPI) using both the conventional nested Monte Carlo approach and the GAM approach. EVSI was calculated using the GAM approach. For all 3 case studies, the GAM approach consistently gave similar estimates of EVPPI compared with the conventional approach. The EVSI behaved as expected: it increased and converged to EVPPI for larger sample sizes. For each case study, generating the PSA results for the GAM approach required 3 to 4 days on a shared cluster, after which EVPPI and EVSI across a range of sample sizes were evaluated in minutes. The conventional approach required approximately 5 weeks for the EVPPI calculation alone. Estimating EVSI using the GAM approach with results from a PSA dramatically reduced the time required to conduct a computationally intense project, which would otherwise have been impractical. Using the GAM approach, we can efficiently provide policy makers with EVSI estimates, even for complex patient-level microsimulation models.

  15. A dynamic case definition is warranted for adequate notification in an extended epidemic setting: the Dutch Q fever outbreak 2007-2009 as exemplar.

    Science.gov (United States)

    Jaramillo-Gutierrez, G; Wegdam-Blans, M C; ter Schegget, R; Korbeeck, J M; van Aken, R; Bijlmer, H A; Tjhie, J H; Koopmans, M P

    2013-10-10

    Q fever is a notifiable disease in the Netherlands:laboratories are obliged to notify possible cases to the Municipal Health Services. These services then try to reconfirm cases with additional clinical and epidemiological data and provide anonymised reports to the national case register of notifiable diseases. Since the start of the 2007–2009 Dutch Q fever outbreak,notification rules remained unchanged, despite new laboratory insights and altered epidemiology. In this study, we retrospectively analysed how these changes influenced the proportion of laboratory-defined acute Q fever cases (confirmed, probable and possible)that were included in the national case register, during(2009) and after the outbreak (2010 and 2011).The number of laboratory-defined cases notified to the Municipal Health Services was 377 in 2009, 96 in 2010 and 50 in 2011. Of these, 186 (49.3%) in 2009, 12(12.5%) in 2010 and 9 (18.0%) in 2011 were confirmed as acute infection by laboratory interpretation. The proportion of laboratory-defined acute Q fever cases that was reconfirmed by the Municipal Health Services and that were included in the national case register decreased from 90% in 2009, to 22% and 24% in 2010 and 2011, respectively. The decrease was observed in all categories of cases, including those considered to be confirmed by laboratory criteria. Continued use ofa pre-outbreak case definition led to over-reporting of cases to the Municipal Health Services in the post-epidemic years. Therefore we recommend dynamic laboratory notification rules, by reviewing case definitions periodically in an ongoing epidemic, as in the Dutch Q fever outbreak.

  16. Experimental study of mixed additive of Ni(II) and piperazine on ammonia escape in CO2 capture using ammonia solution

    International Nuclear Information System (INIS)

    Ma, Shuangchen; Chen, Gongda; Zhu, Sijie; Wen, Jiaqi; Gao, Ran; Ma, Lan; Chai, Jin

    2016-01-01

    Highlights: • Compound additive was used to obtain high CO 2 absorption efficiency and low NH 3 escape. • Both organic material and metal ion were applied as compound additive. • Influences of additives on CO 2 absorption and NH 3 escape were investigated. • Possible mechanism and products were analyzed by XRD and UV–visible spectrophotometer. - Abstract: In order to obtain high CO 2 absorption efficiency and low ammonia escape rate, mixed additives of piperazine and Ni(II) were used as absorbent in bubbling reactor. The effects of mixed additive on CO 2 absorption efficiency and ammonia escape rate were investigated; the performances of mixed additive in removal process were compared with that of pure ammonia solution. The proposed mechanism was analyzed by XRD and UV–visible spectrophotometer. The mixed additive has well effect on CO 2 absorption efficiency and ammonia escape reduction. The CO 2 absorption efficiency was 72% when 2 wt% ammonia solution mixed with 0.025 mol/L piperazine and 0.05 mol/L Ni(II), higher than that achieved by 3 wt% ammonia solution without additive, and the amount of ammonia loss was nearly 1/3 compared with 3 wt% pure ammonia solution. This paper provided one feasible method which is beneficial to the balance between CO 2 absorption and ammonia escape in CO 2 capture process.

  17. Using in vitro/in silico data for consumer safety assessment of feed flavoring additives e A feasibility study using piperine

    NARCIS (Netherlands)

    Thiel, A.; Etheve, S.; Fabian, E.; Leeman, W.R.; Plautz, J.R.

    2015-01-01

    Consumer health risk assessment for feed additives is based on the estimated human exposure to the additive that may occur in livestock edible tissues compared to its hazard.We present an approach using alternative methods for consumer health risk assessment. The aim was to use the fewest possible

  18. Adding Additional Acute Medications to a Triptan Regimen for Migraine and Observed Changes in Headache-Related Disability: Results From the American Migraine Prevalence and Prevention (AMPP) Study.

    Science.gov (United States)

    Buse, Dawn C; Serrano, Daniel; Reed, Michael L; Kori, Shashi H; Cunanan, Cedric M; Adams, Aubrey Manack; Lipton, Richard B

    2015-06-01

    Though triptans are the most widely used acute treatments for migraine, response to treatment is sometimes suboptimal. Triptan therapy is often augmented by the addition of other acute treatments. The benefits of this practice have not been examined in large-scale, real-world observational studies. To assess changes in headache-related disability associated with adding additional acute treatments to a triptan regimen by category of added treatment including: a second triptan, nonsteroidal anti-inflammatory drugs (NSAID), opioids or barbiturates. Subjects were participants in the American Migraine Prevalence and Prevention study, a longitudinal, US population-based study of individuals with "severe" headache. Respondents who met International Classification of Headache Disorders 3 beta criteria for migraine were on triptan therapy per respondent self-report, used the same triptan, and provided headache-related disability data for at least 2 consecutive years. Subjects were divided based on headache days per month into 3 groups: low-frequency episodic migraine (LFEM, 0-4), moderate-frequency episodic migraine (MFEM, 5-9), and high-frequency episodic migraine/chronic migraine (HFEM/CM, ≥ 10 headache days per month). HFEM and CM were combined into a single group for analyses because of sample size limitations. Patterns of acute treatment for migraine were monitored from one year to the next over the following couplets of years (2005-2006, 2006-2007, 2007-2008, and 2008-2009). The first eligible couplet was analyzed for each respondent. Medication regimens studied included: (1) maintaining current triptan use (consistent group); (2) adding a different triptan; (3) adding an NSAID; or (4) adding a combination analgesic containing opioids or barbiturates. We assessed change in Migraine Disability Assessment (MIDAS) score from the first to the second year of a couplet, contrasting scores of participants with consistent use with those who added an acute treatment to

  19. Additive effect of congenital heart disease and early developmental disorders on attention-deficit/hyperactivity disorder and autism spectrum disorder: a nationwide population-based longitudinal study.

    Science.gov (United States)

    Tsao, Pei-Chen; Lee, Yu-Sheng; Jeng, Mei-Jy; Hsu, Ju-Wei; Huang, Kai-Lin; Tsai, Shih-Jen; Chen, Mu-Hong; Soong, Wen-Jue; Kou, Yu Ru

    2017-11-01

    In this retrospective nationwide population-based case-control study, we investigated the impact of congenital heart disease (CHD) on the development of attention-deficit/hyperactivity disorder (ADHD) and autism spectrum disorder (ASD), which remains unclear. Children aged disorders (EDD) that were diagnosed before ADHD and ASD diagnosis were also analyzed. The incidence rates of perinatal comorbidities, EDD, ADHD, and ASD were higher in the CHD group than in the control group. Multivariate Cox regression analysis revealed that the CHD group had an increased risk of developing ADHD (adjusted hazard ratio [aHR] 2.52, 95% confidence interval CI 1.96-3.25) and ASD (aHR 1.97, 95% CI 1.11-3.52) after adjusting for confounding comorbidities. EDD, but not perinatal comorbidities were also independent risk factors for ADHD and ASD after adjustment. Subgroup analysis indicated that the risk for ADHD (HR 16.59, 95% CI 12.17-22.60) and ASD (HR 80.68, 95% CI 39.96-176.12) was greatly increased in CHD subjects with EDD than in non-CHD subjects without EDD. These findings suggested that CHD at birth and EDD during early childhood were two independent risk factors for ADHD and ASD and that concurrent CHD and EDD might additively increase these risks.

  20. Solving the Big Data (BD) Problem in Advanced Manufacturing (Subcategory for work done at Georgia Tech. Study Process and Design Factors for Additive Manufacturing Improvement)

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Brett W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Diaz, Kimberly A. [Georgia Inst. of Technology, Atlanta, GA (United States); Ochiobi, Chinaza Darlene [Georgia Inst. of Technology, Atlanta, GA (United States); Paynabar, Kamran [Georgia Inst. of Technology, Atlanta, GA (United States)

    2015-09-01

    3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.

  1. Study on analysis of waste edible oil with deterioration and removal of acid value, carbonyl value, and free fatty acid by a food additive (calcium silicate).

    Science.gov (United States)

    Ogata, Fumihiko; Tanaka, Yuko; Tominaga, Hisato; Kangawa, Moe; Inoue, Kenji; Ueda, Ayaka; Iwata, Yuka; Kawasaki, Naohito

    2013-01-01

    This study investigated the regeneration of waste edible oil using a food additive (calcium silicate, CAS). Waste edible oil was prepared by combined heat and aeration treatment. Moreover, the deterioration of edible oil by combined heat and aeration treatment was greater than that by heat treatment alone. The acid value (AV) and carbonyl value (CV) increased with increasing deterioration; conversely, the tocopherol concentration decreased with increasing deterioration. The specific surface area, pore volume, and mean pore diameter of the 3 CAS formulations used (CAS30, CAS60, and CAS90) were evaluated, and scanning electron microscopic images were taken. The specific surface area increased in the order of CAS30 (115.54 m(2)/g) edible oil was possible with CAS treatment. The AV reduced by 15.2%, 10.8%, and 23.1% by CAS30, CAS60, and CAS90 treatment, respectively, and the CV was reduced by 35.6%, 29.8%, and 31.3% by these 3 treatments, respectively. Moreover, the concentrations of tocopherol and free fatty acids did not change with CAS treatment. The characteristics of CAS were not related to the degree of change of AV and CV. However, the adsorption mechanism of polar and non-polar compounds generated in waste edible oil by CAS was related with the presence of silica gel molecules in CAS. The findings indicated that CAS was useful for the regeneration of waste edible oil.

  2. Study of the Effects of Ethanol As an Additive with a Blend of Poultry Litter Biodiesel and Alumina Nanoparticles on a Diesel Engine

    Directory of Open Access Journals (Sweden)

    Ramesha D. K.

    2017-12-01

    Full Text Available With the increasing population and rise in industrialization, the demand for petroleum reserves is increasing almost daily. This is causing depletion of the non-renewable energy resources. This work aims to find an alternative fuel for diesel engines. The use of poultry litter oil biodiesel obtained from poultry industry waste, which is a non-edible source for biodiesel, is very encouraging as an alternative fuel for diesel engines. The aim of this study is to observe and maximize the performance of poultry litter oil biodiesel by adding alumina nanoparticles and ethanol. The biodiesel is prepared with acid and the base catalysed transesterification of poultry litter oil with methanol using concentrated sulphuric acid and potassium hydroxide as catalysts. The experimentation is carried out on a CI engine with three different blends - B20 biodiesel blend, B20 biodiesel blend with 30 mg/L alumina nanoparticles, and B20 biodiesel blend with 30 mg/L alumina nanoparticles and 15 ml/L ethanol. The performance, combustion and emission characteristics of all three blends are compared with neat diesel. The results of the experiment show that ethanol as an additive improves the combustion and performance characteristics. It increases the brake thermal efficiency and peak cylinder pressure. It also reduces CO and UBHC emissions and there is a marginal increase in NOx emissions as compared to neat diesel.

  3. Additive prognostic value of interleukin-6 at peak phase of dobutamine stress echocardiography in patients with coronary artery disease. A 6-year follow-up study.

    Science.gov (United States)

    Ikonomidis, Ignatios; Athanassopoulos, George; Stamatelopoulos, Kimon; Lekakis, John; Revela, Ioanna; Venetsanou, Kiriaki; Marinou, Margarita; Monaco, Claudia; Cokkinos, Dennis V; Nihoyannopoulos, Petros

    2008-08-01

    Interleukin-6 (IL-6) and tissue factor (TF) are elevated after myocardial ischemia during dobutamine stress echo (DSE). We examined the incremental prognostic value of IL-6 or TF measured during DSE over echocardiographic and clinical factors in patients with chronic coronary artery disease (CAD). We studied 106 patients with angiographically documented CAD. IL-6 and TF were measured at rest, peak, and during recovery. A wall motion score index was calculated. Fifty-seven (54%) patients had ischemia at DSE. During follow-up (63.7 +/- 20 months), 36 patients (33%) had an adverse event (12 cardiac deaths, 24 acute coronary events). Patients with events had a higher peak IL-6 (P = .02) but similar rest and recovery IL-6 than those without. Patients with peak IL-6 > or =3.14 pg/mL (upper tertile) had a hazard ratio of 2.7 (95% CI 1.44-5.37) (P statistic from 0.66 to 0.70 (P = .04). The addition of peak IL-6 further increased the model's c statistic to 0.75 (P = .04). Tissue factor was not related with cardiac events. Interleuikin-6 levels measured during the peak phase of DSE incrementally contribute to risk stratification in patients with chronic CAD.

  4. A study of malignancy rates in different diagnostic categories of the Bethesda system for reporting thyroid cytopathology: An institutional experience

    Directory of Open Access Journals (Sweden)

    P. Arul

    2015-12-01

    Conclusion: Our study validated the efficacy of TBSRTC. In conclusion, the malignancy rate of AUS/FLUS in this study was higher than the risk mentioned in TBSRTC and other published studies. Hence, AUS/FLUS category patients in our setup warrant further workup including ultrasound and/or thyroid scan in addition to immediate repeat FNAC.

  5. Acceptability of woman-delivered HIV self-testing to the male partner, and additional interventions: a qualitative study of antenatal care participants in Malawi.

    Science.gov (United States)

    Choko, Augustine Talumba; Kumwenda, Moses Kelly; Johnson, Cheryl Case; Sakala, Doreen Wongera; Chikalipo, Maria Chifuniro; Fielding, Katherine; Chikovore, Jeremiah; Desmond, Nicola; Corbett, Elizabeth Lucy

    2017-06-26

    In the era of ambitious HIV targets, novel HIV testing models are required for hard-to-reach groups such as men, who remain underserved by existing services. Pregnancy presents a unique opportunity for partners to test for HIV, as many pregnant women will attend antenatal care (ANC). We describe the views of pregnant women and their male partners on HIV self-test kits that are woman-delivered, alone or with an additional intervention. A formative qualitative study to inform the design of a multi-arm multi-stage cluster-randomized trial, comprised of six focus group discussions and 20 in-depth interviews, was conducted. ANC attendees were purposively sampled on the day of initial clinic visit, while men were recruited after obtaining their contact information from their female partners. Data were analysed using content analysis, and our interpretation is hypothetical as participants were not offered self-test kits. Providing HIV self-test kits to pregnant women to deliver to their male partners was highly acceptable to both women and men. Men preferred this approach compared with standard facility-based testing, as self-testing fits into their lifestyles which were characterized by extreme day-to-day economic pressures, including the need to raise money for food for their household daily. Men and women emphasized the need for careful communication before and after collection of the self-test kits in order to minimize the potential for intimate partner violence although physical violence was perceived as less likely to occur. Most men stated a preference to first self-test alone, followed by testing as a couple. Regarding interventions for optimizing linkage following self-testing, both men and women felt that a fixed financial incentive of approximately USD$2 would increase linkage. However, there were concerns that financial incentives of greater value may lead to multiple pregnancies and lack of child spacing. In this low-income setting, a lottery incentive was

  6. Does addition of `mud-pack and hot pool treatment' to patient education make a difference in fibromyalgia patients? A randomized controlled single blind study

    Science.gov (United States)

    Bağdatlı, Ali Osman; Donmez, Arif; Eröksüz, Rıza; Bahadır, Güler; Turan, Mustafa; Erdoğan, Nergis

    2015-12-01

    The aim of this randomized controlled single-blind study is to explore whether addition of mud-pack and hot pool treatments to patient education make a significant difference in short and mild term outcomes of the patients with fibromyalgia. Seventy women with fibromyalgia syndrome were randomly assigned to either balneotherapy with mud-pack and hot pool treatments (35) or control (35) groups. After randomization, five patients from balneotherapy group and five patients from control group were dropped out from the study with different excuses. All patients had 6-h patient education programme about fibromyalgia syndrome and were given a home exercise programme. The patients in balneotherapy group had heated pool treatment at 38 °C for 20 min a day, and mud-pack treatment afterwards on back region at 45 °C. Balneotherapy was applied on weekdays for 2 weeks. All patients continued to take their medical treatment. An investigator who was blinded to the intervention assessed all the patients before and after the treatment, at the first and the third months of follow-up. Outcome measures were FIQ, BDI and both patient's and physician's global assessments. Balneotherapy group was significantly better than control group at after the treatment and at the end of the first month follow-up assessments in terms of patient's and physician's global assessment, total FIQ score, and pain intensity, fatigue, non-refreshed awaking, stiffness, anxiety and depression subscales of FIQ. No significant difference was found between the groups in terms of BDI scores. It is concluded that patient education combined with 2 weeks balneotherapy application has more beneficial effects in patients with fibromyalgia syndrome as compared to patient education alone.

  7. A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements

    Directory of Open Access Journals (Sweden)

    M. Rezazadeh

    2016-09-01

    Full Text Available The aim of the present study is to study the effects of adding  diopside (CaMgSi2O6 as well as silica sulfuric acid nanoparticles to ceramic part of glass ionomer cement (GIC in order to improve its mechanical properties. To do this, firstly, diopside (DIO nanoparticles with chemical formula of CaMgSi2O6 were synthesized using sol-gel process and then, the structural and morphological properties of synthesized diopside nanoparticles were investigated. The results of scanning electron microscopy (SEM and particle size analyzing (PSA confirmed that synthesized diopside are nanoparticles and agglomerated. Besides, the result of X-ray diffraction (XRD analyses approved the purity of diopside nanoparticles compounds. Silica sulfuric acid (SSA nanoparticles are also prepared by chemical modification of silica nanoparticles by means of chlorosulfonic acid. Fourier transform infrared spectroscopy (FTIR technique was used to find about the presence of the (SO3H groups on the surface of silica sulfuric acid nanoparticles. Furthermore, various amounts (0.1, 3 and 5 wt.% of diopside and silica sulfuric acid nanoparticles were added to the ceramic part of GIC (Fuji II GIC commercial type to produce glass ionomer cement nanocomposites. The mechanical properties of the produced nanocomposites were measured using the compressive strength, three-point flexural strength and diametral tensile strength methods. Fourier transform infrared spectroscopy technique confirmed the presence of the (SO3H groups on the surface of silica nanoparticles. The compressive strength, three-point flexural strength and diametral tensile strength were 42.5, 15.4 and 6 MPa, respectively, without addition. Although adding 1% silica solfonic acid improved nanocomposite mchanical properties by almost 122%, but maximum increase in nanocomposite mechanical properties was observed in the nanocomposites with 3% diposid, in which 160% increase was seen in the mechanical properties.

  8. Does addition of 'mud-pack and hot pool treatment' to patient education make a difference in fibromyalgia patients? A randomized controlled single blind study.

    Science.gov (United States)

    Bağdatlı, Ali Osman; Donmez, Arif; Eröksüz, Rıza; Bahadır, Güler; Turan, Mustafa; Erdoğan, Nergis

    2015-12-01

    The aim of this randomized controlled single-blind study is to explore whether addition of mud-pack and hot pool treatments to patient education make a significant difference in short and mild term outcomes of the patients with fibromyalgia. Seventy women with fibromyalgia syndrome were randomly assigned to either balneotherapy with mud-pack and hot pool treatments (35) or control (35) groups. After randomization, five patients from balneotherapy group and five patients from control group were dropped out from the study with different excuses. All patients had 6-h patient education programme about fibromyalgia syndrome and were given a home exercise programme. The patients in balneotherapy group had heated pool treatment at 38 °C for 20 min a day, and mud-pack treatment afterwards on back region at 45 °C. Balneotherapy was applied on weekdays for 2 weeks. All patients continued to take their medical treatment. An investigator who was blinded to the intervention assessed all the patients before and after the treatment, at the first and the third months of follow-up. Outcome measures were FIQ, BDI and both patient's and physician's global assessments. Balneotherapy group was significantly better than control group at after the treatment and at the end of the first month follow-up assessments in terms of patient's and physician's global assessment, total FIQ score, and pain intensity, fatigue, non-refreshed awaking, stiffness, anxiety and depression subscales of FIQ. No significant difference was found between the groups in terms of BDI scores. It is concluded that patient education combined with 2 weeks balneotherapy application has more beneficial effects in patients with fibromyalgia syndrome as compared to patient education alone.

  9. Service provider perceptions of telerehabilitation as an additional service delivery option within an Australian neurosurgical and orthopaedic physiotherapy screening clinic: A qualitative study.

    Science.gov (United States)

    Cottrell, Michelle A; Hill, Anne J; O'Leary, Shaun P; Raymer, Maree E; Russell, Trevor G

    2017-12-01

    The Neurosurgical & Orthopaedic Physiotherapy Screening Clinic and Multidisciplinary Service (N/OPSC&MDS) originated as a complementary, non-surgical pathway for patients referred to public neurosurgical and orthopaedic specialist services. Patient access to the N/OPSC&MDS could potentially be improved with the implementation of telerehabilitation as an additional method of service delivery. To evaluate service provider's views on (1) current barriers to patients' accessing N/OPSC & MD services, and (2) the implementation of telerehabilitation within the N/OPSC&MDS. Qualitative descriptive study design. Healthcare providers (n = 26) were recruited from six N/OPSC&MD services located throughout Queensland, Australia. Semi-structured interviews were conducted to explore service providers' views with respect to existing barriers to patients accessing the N/OPSC&MDS, and if telerehabilitation could be feasibly adopted to address current barriers. Template analysis resulted in six themes: (1) barriers to some patients' accessing current N/OPSC&MD services are complex & multifaceted; (2) telerehabilitation could improve patient access to appropriate management for their musculoskeletal condition; (3) telerehabilitation may have limitations when compared to face-to-face healthcare; (4) the delivery of telerehabilitation needs to be flexible; (5) perceived barriers, and (6) facilitators to the successful implementation of telerehabilitation within the N/OPSC&MDS. This study represents a critical step in determining the readiness of service providers for the implementation of telerehabilitation within the N/OPSC&MDS. Although cautious, service providers are overall accepting of the implementation of telerehabilitation, acknowledging that it could eliminate several current barriers, subsequently achieving more equitable access to the service. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  10. Adsorption of benzyldimethylhexadecylammonium chloride at the hydrophobic silica-water interface studied by total internal reflection Raman spectroscopy: effects of silica surface properties and metal salt addition.

    Science.gov (United States)

    Grenoble, Zlata; Baldelli, Steven

    2013-08-29

    The adsorption of the cationic surfactant benzyldimethylhexadecylammonium (BDMHA(+)) chloride was studied at an octadecyltrichlorosilane (OTS)-monolayer-modified silica-water interface by Raman spectroscopy in total internal reflection (TIR) geometry. The present study demonstrates the capabilities of this spectroscopic technique to evaluate thermodynamic and kinetic BDMHA(+)Cl(-) adsorption properties at the hydrophobic silica surface. The surface coverage of BDMHA(+) decreased by 50% at the hydrophobic OTS-silica surface relative to the surface coverage on bare silica; the dominating driving mechanisms for surfactant adsorption were identified as hydrophobic effects and head group charge screening by the electrolyte counterions. Addition of magnesium metal salt (MgCl2) to the aqueous solution (∼ neutral pH) lowered the surface coverage and moderately increased the Langmuir adsorption constants relative to those of the pure surfactant. These trends were previously observed at the hydrophilic, negatively charged silica surface but with a smaller change in the Gibbs free energy of adsorption at the hydrophobic silica surface. The hydrophobic OTS-silica surface properties resulted in shorter times for the surfactant to reach steady-state adsorption conditions compared to the slow adsorption kinetics previously seen with the surfactant at the hydrophilic surface. Adsorption isotherms, based on Raman signal intensities from spectral analysis, were developed according to the Langmuir adsorption model for the pure surfactant at the OTS-silica-water interface; the modified Langmuir model was applied to the surfactant adsorption in the presence of 5, 10, 50, and 100 mM magnesium chloride. Spectral analysis of the Raman scattering intensities and geometric considerations suggests a hemimicelle-type surface aggregate as the most likely surfactant structure at the OTS-silica surface. The different kinetics observed at the hydrophilic versus the hydrophobic silica surface

  11. Closure of patent ductus arteriosus in children, small infants, and premature babies with Amplatzer duct occluder II additional sizes: multicenter study.

    Science.gov (United States)

    Sungur, Metin; Karakurt, Cemsit; Ozbarlas, Nazan; Baspinar, Osman

    2013-08-01

    To evaluate safety and efficacy of closure of patent ductus arteriosus (PDA) with Amplatzer duct occluder II Additional Sizes (ADO II AS) and to report early and midterm results of the device in children and very young symptomatic infants. Retrospective analysis of angiographic data of 60 children from four pediatric cardiology centers. The median patient age and weight were 6.5 (0.5-168) months and 6.8 (1.19-57) kg, respectively. In the study, 26 children had a body weight of ≤ 6 kg. Of these 26 children, 9 had a body weight of ≤ 3 kg. The median narrowest diameter of PDA was 2 (1.2-4) mm. Ductal anatomy was Type A in 29, Type B in 2, Type C in 11, Type D in 1, and Type E in 16 patients, and a residual PDA after surgery in 1 patient. Closure with ADO II AS was achieved in 58 (96.6%) of 60 attempted cases. In two infants, the device was not released because of significant residual shunt. ADO II was used in one, and the other was sent to surgery. Complete closure was observed in all ADO II AS deployed children by the next day on echocardiography. Median follow-up was 12 (1-18) months. Neither death nor any major complications occurred. Our study shows that closure of medium and small sized PDA by using ADO II AS device is effective and safe in children. The use of the device will expand the field of application of PDA closure in small infants. © 2013 Wiley Periodicals, Inc.

  12. Alternative additives; Alternative additiver

    Energy Technology Data Exchange (ETDEWEB)

    2007-08-15

    In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations aiming at reducing corrosion or slagging related problems. The following products have been obtained, characterised and evaluated: 1) Brewery draff 2) Danish de-gassed manure 3) Paper sludge 4) Moulding sand 5) Spent bleaching earth 6) Anorthosite 7) Sand 8) Clay-sludge. Most of the above alternative additive candidates are deemed unsuitable due to insufficient chemical effect and/or expensive requirements for pre-treatment (such as drying and transportation). 3 products were selected for full-scale testing: de-gassed manure, spent bleaching earth and clay slugde. The full scale tests were undertaken at the biomass-fired power stations in Koege, Slagelse and Ensted. Spent bleaching earth (SBE) and clay sludge were the only tested additive candidates that had a proven ability to react with KCl, to thereby reduce Cl-concentrations in deposits, and reduce the deposit flux to superheater tubes. Their performance was shown to nearly as good as commercial additives. De-gassed manure, however, did not evaluate positively due to inhibiting effects of Ca in the manure. Furthermore, de-gassed manure has a high concentration of heavy metals, which imposes a financial burden with regard to proper disposal of the ash by-products. Clay-sludge is a wet clay slurring, and drying and transportation of this product entails substantial costs. Spent bleaching does not require much pre-treatment and is therefore the most promising alternative additive. On the other hand, bleaching earth contains residual plant oil which means that a range of legislation relating to waste combustion comes into play. Not least a waste combustion fee of 330 DKK/tonne. For all alternative (and commercial) additives disposal costs of the increase ash by-products represents a significant cost. This is

  13. STUDY TO EVALUATE THE ADDITIONAL BENEFIT OF THE HYDROLIC CAPSULAR DISTENTION USING NORMAL SALINE AND STEROID IN THE MANAGEMENT OF THE FROZEN SHOULDERS TREATED WITH CONVENTIONAL PHYSIOTHERAPY

    Directory of Open Access Journals (Sweden)

    Mandar S

    2015-02-01

    Full Text Available Although many treatment options have been advocated for the self - limiting disease of the frozen shoulder, there is no robust evidence of the superiority of one over other . This study intended to evaluate the outcome of hydrolic capsular distension followed by physiotherapy and its comparison with only physiotherapy regime in treatment of frozen shoulder. AIMS AND OBJECTIVES : Evaluate the additional benefit of the hydrolic capsular distension using normal saline and steroid in the management of the frozen shoulder treated with conventional physiotherapy . MATERIALS AND METHODS: In this randomized prospective study we have studied total 50 cases within the age group of 40 - 70 years with idiopathic frozen shoulder. They were divided into two groups of 25 patients each. Patients in the first group were treated with shoulder joint capsular distension using normal saline and steroid under local anesthesia at outpatient department followed by physiotherapy and the patients in second group were treated with physiotherapy only. The aim was to obtain earlier pain relief and earlier relief from functional disability. Shoulder pain and disability index (SPADI & Visual analogue scale (VAS score was used as a tool for evaluation and comparison. RESULTS: After confounding all the demographic factors it was found that the intra as well as inter group change in SPADI score revealed statistically extremely significant difference (p value - <0.0001 at the end of 12 th week. Hydrotherapy group being superior than the only physiotherapy group. VAS score showed statistically extremely significant improvement in hydrotherapy group at the end of 1 st week (p value - <0.0001 as compared to not much improvement in only physiotherapy group (p value - 0.0830. Similar results were observed with the SPADI score values at the end of first week, where 80% patient in hydrotherapy group felt some improvement in performing daily activities at the same time no one was quoted

  14. Increased risk of schizophrenia from additive interaction between infant motor developmental delay and obstetric complications: evidence from a population-based longitudinal study.

    LENUS (Irish Health Repository)

    Clarke, Mary C

    2011-12-01

    Obstetric complications and developmental delay are well-established risk factors for schizophrenia. The authors investigated whether these risk factors interact in an additive manner to further increase risk for schizophrenia.

  15. Model Additional Protocol

    International Nuclear Information System (INIS)

    Rockwood, Laura

    2001-01-01

    Since the end of the cold war a series of events has changed the circumstances and requirements of the safeguards system. The discovery of a clandestine nuclear weapons program in Iraq, the continuing difficulty in verifying the initial report of Democratic People's Republic of Korea upon entry into force of their safeguards agreement, and the decision of the South African Government to give up its nuclear weapons program and join the Treaty on the Non-Proliferation of Nuclear Weapons have all played a role in an ambitious effort by IAEA Member States and the Secretariat to strengthen the safeguards system. A major milestone in this effort was reached in May 1997 when the IAEA Board of Governors approved a Model Protocol Additional to Safeguards Agreements. The Model Additional Protocol was negotiated over a period of less than a year by an open-ended committee of the Board involving some 70 Member States and two regional inspectorates. The IAEA is now in the process of negotiating additional protocols, State by State, and implementing them. These additional protocols will provide the IAEA with rights of access to information about all activities related to the use of nuclear material in States with comprehensive safeguards agreements and greatly expanded physical access for IAEA inspectors to confirm or verify this information. In conjunction with this, the IAEA is working on the integration of these measures with those provided for in comprehensive safeguards agreements, with a view to maximizing the effectiveness and efficiency, within available resources, the implementation of safeguards. Details concerning the Model Additional Protocol are given. (author)

  16. An additive effect of leading role in the organization between social participation and dementia onset among Japanese older adults: the AGES cohort study.

    Science.gov (United States)

    Nemoto, Yuta; Saito, Tami; Kanamori, Satoru; Tsuji, Taishi; Shirai, Kokoro; Kikuchi, Hiroyuki; Maruo, Kazushi; Arao, Takashi; Kondo, Katsunori

    2017-12-29

    Several previous studies reported social participation may reduce the incident of dementia; therefore, the type of positions held in the organization may relate to dementia onset. However, this hypothesis remains largely unknown. The purpose of the present study was to examine the additive effect of a leadership position in the organization on dementia onset and social participation among elderly people in a local community, according to data from a Japanese older adults cohort study. Of 29,374 community-dwelling elderly, a total of 15,313 subjects responded to the baseline survey and were followed-up from November 2003 to March 2013. To evaluate the association between dementia onset and social participation as well as the role in the organization, we conducted Cox proportional hazard regression analysis with multiple imputation by age group (aged 75 years older or younger). The dependent variable was dementia onset, which was obtained from long-term care insurance data in Japan; independent variables were social participation and the role in the organization to which they belonged (head, manager, or treasurer). Covariates were sex, age, educational level, marriage status, job status, residence status, alcohol consumption, smoking status, and walking time, instrumental activities of daily living, depression, and medical history. During the follow-up period, 708 young-old elderly people (7.7%) and 1289 old-old elderly people (27.9%) developed dementia. In young-old elderly, relative to social non-participants, adjusted Hazard Ratio (HR) for dementia onset for participants (regular members + leadership positions) was 0.75 (95% confidence interval (CI), 0.64-0.88). Relative to regular members, adjusted HR for dementia onset for non-participants was 1.22 (95% CI, 1.02-1.46), for leadership positions 0.81 (95% CI, 0.65-0.99). The results for old-old elderly participants did not show that any significantly adjusted HR between dementia onset and social participation

  17. A potential study on clove oil, eugenol and eugenyl acetate as diesel fuel bio-additives and their performance on one cylinder engine

    Directory of Open Access Journals (Sweden)

    A. Kadarohman

    2010-03-01

    Full Text Available Research on the potency of essential oils as diesel fuel bio-additives has been reported. It also has been found out that clove oil has a better performance than turpentine oil on decreasing Break Specific Fuel Consumption (BSFC and reduces the exhaust emissions of the engine. Clove oil is essential oil the content of which is made of eugenol acting as the main component. Eugenol has a bulky structure, two oxygen atoms and can form eugenyl acetate from ester reaction. Eugenyl acetate has a bulkier structure and higher oxygen content than eugenol which leads to optimizing the process of fuel combustion. This experiment can give information about the potency of the bio-additive based on clove oil and eugenol and about the influence of oxygen enrichment with eugenol on the performance of the diesel fuel bio-additive. In general, this experiment covered three stages. The first step is the characterization of the diesel fuel bio-additive using a GCMS and FTIR spectrophotometer. The second step is the characterization of the diesel fuel bio-additive and composition optimization. The final step is conducting a diesel fuel bio-additive performance test on one cylinder engine on a laboratory scale. The results of the carried out experiment show that clove oil, eugenol and eugenyl acetate can decrease Break Specific Fuel Consumption (BSFC and reduce the exhaust emissions of the engine as well as oxygen enrichment can help in reaching optimal fuel combustion.

  18. A conceptual study on the formulation of a permeable reactive pavement with activated carbon additives for controlling the fate of non-point source environmental organic contaminants.

    Science.gov (United States)

    Huang, Shengyi; Liang, Chenju

    2018-02-01

    To take advantage of the road pavement network where non-point source (NPS) pollution such as benzene, toluene, ethyl-benzene, and xylene (BTEX) from vehicle traffic exhaust via wet and dry atmospheric deposition occurs, the asphalt pavement may be used as a media to control the NPS pollution. An experiment to prepare an adsorptive porous reactive pavement (PRP) was initiated to explore the potential to reduce environmental NPS vehicle pollution. The PRP was prepared and studied as follows: various activated carbons (AC) were initially screened to determine if they were suitable as an additive in the porous asphalt mixture; various mixtures of a selected AC were incorporated with the design of porous asphalt concrete (PAC) to produce PRP, and the PRP formulations were tested to ensure that they comply with the required specifications; qualified specimens were subsequently tested to determine their adsorption capacity for BTEX in aqueous solution, as compared to conventional PAC. The PRP08 and PRP16 samples, named for the design formulations of 0.8% and 1.6% of AC (by wt. in the formulation), exhibited low asphalt drain-down and low abrasion loss and also met all regulated specifications. The BTEX adsorption capacity measurements of PRP08 and PRP16 were 33-46%, 36-51%, 20-22%, and 6-8% respectively, higher than those obtained from PACs. Based on the test results, PRPs showed good physical performance and adsorption and may be considered as a potential method for controlling the transport of NPS vehicle pollutants. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Qing-Xin-Jie-Yu Granules in addition to conventional treatment for patients with stable coronary artery disease (QUEST Trial): study protocol for a randomized controlled trial.

    Science.gov (United States)

    Li, Shengyao; Guo, Ming; Mao, Huimin; Gao, Zhuye; Xu, Hao; Shi, Dazhuo

    2016-09-15

    Recurrent cardiovascular event remains high in stable coronary artery disease (SCAD), especially in patients with multiple risk factors, despite a high rate of use conventional treatment. Traditional Chinese Medicine (TCM) is a promising complementary and alternative medicine for treating SCAD, while evidence for its effect on long-term survival is limited. This study was designed to test if Chinese herbal medicine in addition to conventional treatment is more effective than conventional treatment alone in reducing major adverse cardiac event (MACE) for SCAD patients with multiple risk factors during a 1-year follow-up. This is a multicenter, placebo-controlled, double-blinded, randomized controlled clinical trial. A total of 1500 patients are randomized in a 1:1 ratio to receive the Qing-Xin-Jie-Yu Granules (QXJYG) or the placebo granules, twice daily for 6 months. The primary outcome is the combined outcomes including cardiac death, nonfatal myocardial infarction and revascularization. The secondary outcome is the combined outcomes including all-cause mortality, re-admission for acute coronary syndrome (ACS), heart failure, malignant supraventricular and ventricular arrhythmia influencing hemodynamics, ischemic stroke, and other thromboembolic events during 1-year follow-up. The assessment is performed at baseline (before randomization), 1, 3, 6, 9, and 12 months after randomization. This is the first multicenter trial sponsored by the national funding of China to evaluate TCM in combination with conventional treatment on 1-year survival in high-risk SCAD patients. If successful, it will provide an evidence-based complementary therapeutic approach for reducing MACE from SCAD. The trial was registered in the Chinese Clinical Trial Registry on December 28, 2013. The registration number is ChiCTR-TRC-13004370 .

  20. Additive manufacturing of metals

    International Nuclear Information System (INIS)

    Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus

    2016-01-01

    Additive Manufacturing (AM), the layer-by layer build-up of parts, has lately become an option for serial production. Today, several metallic materials including the important engineering materials steel, aluminium and titanium may be processed to full dense parts with outstanding properties. In this context, the present overview article describes the complex relationship between AM processes, microstructure and resulting properties for metals. It explains the fundamentals of Laser Beam Melting, Electron Beam Melting and Laser Metal Deposition, and introduces the commercially available materials for the different processes. Thereafter, typical microstructures for additively manufactured steel, aluminium and titanium are presented. Special attention is paid to AM specific grain structures, resulting from the complex thermal cycle and high cooling rates. The properties evolving as a consequence of the microstructure are elaborated under static and dynamic loading. According to these properties, typical applications are presented for the materials and methods for conclusion.

  1. Phase 1/2 Study of the Addition of Cisplatin to Adjuvant Chemotherapy With Image Guided High-Precision Radiation Therapy for Completely Resected Gastric Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Goody, Rebecca B. [Department of Radiation Oncology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); MacKay, Helen [Department of Medical Oncology and Hematology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Pitcher, Bethany [Department of Biostatistics, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Oza, Amit; Siu, Lillian L. [Department of Medical Oncology and Hematology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Kim, John; Wong, Rebecca K.S. [Department of Radiation Oncology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Chen, Eric [Department of Medical Oncology and Hematology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Swallow, Carol [Department of Surgical Oncology, Mount Sinai Hospital, University of Toronto, Toronto, Ontario (Canada); Knox, Jennifer [Department of Medical Oncology and Hematology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Kassam, Zahra [Department of Radiation Oncology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Department of Radiation Oncology, Stronach Regional Cancer Centre, Newmarket, Ontario (Canada); Cummings, Bernard [Department of Radiation Oncology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Feld, Ron; Hedley, David; Liu, Geoffrey; Krzyzanowska, Monika K. [Department of Medical Oncology and Hematology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Dinniwell, Robert; Brade, Anthony M.; Dawson, Laura A. [Department of Radiation Oncology, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); Pintilie, Melania [Department of Biostatistics, Princess Margaret Cancer Centre, University of Toronto, Toronto, Ontario (Canada); and others

    2016-12-01

    Purpose: Locoregional recurrence is common after surgery for gastric cancer. Adjuvant therapy improves outcomes but with toxicity. This phase 1/2 study investigated infusional 5-fluorouracil (5-FU) in combination with biweekly cisplatin delivered concurrently with image guided high-precision radiation therapy. Methods and Materials: Eligible patients had completely resected stage IB to IV (Union for International Cancer Control TNM 6th edition) nonmetastatic gastric adenocarcinoma. Treatment constituted 12 weeks of infusional 5-FU (200 mg/m{sup 2}/day) with cisplatin added in a standard 3 + 3 dose escalation protocol (0, 20, 30, and 40 mg/m{sup 2}) during weeks 1, 3, 5, and 7, and an additional week 9 dose in the final cohort. Radiation therapy (45 Gy in 25 fractions) was delivered during weeks 3 to 7. Maximum tolerated dose (MTD) was determined in phase 1 and confirmed in phase 2. Results: Among the 55 patients (median age, 54 years; range 28-77 years; 55% male), the median follow-up time was 3.0 years (range, 0.3-5.3 years). Five patients in phase 1 experienced dose-limiting toxicity, and MTD was determined as 4 cycles of 40 mg/m{sup 2} cisplatin. Twenty-seven patients were treated at MTD. Acute grade 3 to 4 toxicity rate was 37.0% at MTD and 29.1% across all dose levels. No treatment-related deaths occurred. Fourteen patients experienced recurrent disease. The 2-year overall survival (OS) and relapse-free survival were 85% and 74%, respectively. Median OS has not been reached. Quality of life (QOL) was impaired during treatment, but most scores recovered by 4 weeks. Conclusion: Cisplatin can be safely delivered with 5-FU–based chemoradiation therapy. Acute toxicity was accept