WorldWideScience

Sample records for walls

  1. wall

    Directory of Open Access Journals (Sweden)

    Irshad Kashif

    2016-01-01

    Full Text Available Maintaining indoor climatic conditions of buildings compatible with the occupant comfort by consuming minimum energy, especially in a tropical climate becomes a challenging problem for researchers. This paper aims to investigate this problem by evaluating the effect of different kind of Photovoltaic Trombe wall system (PV-TW on thermal comfort, energy consumption and CO2 emission. A detailed simulation model of a single room building integrated with PV-TW was modelled using TRNSYS software. Results show that 14-35% PMV index and 26-38% PPD index reduces as system shifted from SPV-TW to DGPV-TW as compared to normal buildings. Thermal comfort indexes (PMV and PPD lie in the recommended range of ASHARE for both DPV-TW and DGPV-TW except for the few months when RH%, solar radiation intensity and ambient temperature were high. Moreover PVTW system significantly reduces energy consumption and CO2 emission of the building and also 2-4.8 °C of temperature differences between indoor and outdoor climate of building was examined.

  2. Wonderful Walls

    Science.gov (United States)

    Greenman, Jim

    2006-01-01

    In this article, the author emphasizes the importance of "working" walls in children's programs. Children's programs need "working" walls (and ceilings and floors) which can be put to use for communication, display, storage, and activity space. The furnishings also work, or don't work, for the program in another sense: in aggregate, they serve as…

  3. Ambiguous walls

    DEFF Research Database (Denmark)

    Mody, Astrid

    2012-01-01

    The introduction of Light Emitting Diodes (LEDs) in the built environment has encouraged myriad applications, often embedded in surfaces as an integrated part of the architecture. Thus the wall as responsive luminous skin is becoming, if not common, at least familiar. Taking into account how wall...

  4. Wall Turbulence.

    Science.gov (United States)

    Hanratty, Thomas J.

    1980-01-01

    This paper gives an account of research on the structure of turbulence close to a solid boundary. Included is a method to study the flow close to the wall of a pipe without interferring with it. (Author/JN)

  5. Wall Art

    Science.gov (United States)

    McGinley, Connie Q.

    2004-01-01

    The author of this article, an art teacher at Monarch High School in Louisville, Colorado, describes how her experience teaching in a new school presented an exciting visual challenge for an art teacher--monotonous brick walls just waiting for decoration. This school experienced only minimal instances of graffiti, but as an art teacher, she did…

  6. CLIMBING WALL

    CERN Multimedia

    1999-01-01

    The FIRE AND RESCUE Group of TIS Commission informs that the climbing wall in the yard of the Fire-fighters Station, is intended for the sole use of the members of that service, and recalls that access to this installation is forbidden for safety reasons to all persons not belonging to the Service.CERN accepts no liability for damage or injury suffered as a result of failure to comply with this interdiction.TIS/DI

  7. Falling walls

    CERN Multimedia

    It was 20 years ago this week that the Berlin wall was opened for the first time since its construction began in 1961. Although the signs of a thaw had been in the air for some time, few predicted the speed of the change that would ensue. As members of the scientific community, we can take a moment to reflect on the role our field played in bringing East and West together. CERN’s collaboration with the East, primarily through links with the Joint Institute for Nuclear Research, JINR, in Dubna, Russia, is well documented. Less well known, however, is the role CERN played in bringing the scientists of East and West Germany together. As the Iron curtain was going up, particle physicists on both sides were already creating the conditions that would allow it to be torn down. Cold war historian Thomas Stange tells the story in his 2002 CERN Courier article. It was my privilege to be in Berlin on Monday, the anniversary of the wall’s opening, to take part in a conference entitled &lsquo...

  8. Wall to Wall Optimal Transport

    CERN Document Server

    Hassanzadeh, Pedram; Doering, Charles R

    2013-01-01

    The calculus of variations is employed to find steady divergence-free velocity fields that maximize transport of a tracer between two parallel walls held at fixed concentration for one of two constraints on flow strength: a fixed value of the kinetic energy or a fixed value of the enstrophy. The optimizing flows consist of an array of (convection) cells of a particular aspect ratio Gamma. We solve the nonlinear Euler-Lagrange equations analytically for weak flows and numerically (and via matched asymptotic analysis in the fixed energy case) for strong flows. We report the results in terms of the Nusselt number Nu, a dimensionless measure of the tracer transport, as a function of the Peclet number Pe, a dimensionless measure of the energy or enstrophy of the flow. For both constraints the maximum transport Nu_{MAX}(Pe) is realized in cells of decreasing aspect ratio Gamma_{opt}(Pe) as Pe increases. For the fixed energy problem, Nu_{MAX} \\sim Pe and Gamma_{opt} \\sim Pe^{-1/2}, while for the fixed enstrophy scen...

  9. Comparative study of Trombe wall, water wall and trans wall

    Energy Technology Data Exchange (ETDEWEB)

    Sodha, M.S.; Bansal, N.K.; Singh, S.; Ram, S.; Annamalai, M.; Iyer, M.V.; Nirmala, K.A.; Venkatesh, P.; Prasad, C.R.; Subramani, C.

    1982-01-01

    The thermal performances of three systems viz. Trombe wall: (1) without; and (2) with vents (forced air circulation), water wall and Transwall have been studied analytically interms of heat flux entering the living space (Maintained at 20/sup 0/C) corresponding to the meteriological data on January 19, 1981 at New Delhi (India), a typical cold winter day. Subsequent parametric studies using the simulation indicated that the Transwall system is the more efficient system for the passive heating of buildings.

  10. Domain Walls on Singularities

    CERN Document Server

    Halyo, Edi

    2009-01-01

    We describe domain walls that live on $A_2$ and $A_3$ singularities. The walls are BPS if the singularity is resolved and non--BPS if it is deformed and fibered. We show that these domain walls may interpolate between vacua that support monopoles and/or vortices.

  11. The Lamportian cell wall

    Energy Technology Data Exchange (ETDEWEB)

    Keiliszewski, M.; Lamport, D. (Michigan State Univ. Plant Research Lab., East Lansing (United States))

    1991-05-01

    The Lamportian Warp-Weft hypothesis suggests a cellulose-extensin interpenetrating network where extensin mechanically couples the load-bearing cellulose microfibrils in a wall matrix that is best described as a microcomposite. This model is based on data gathered from the extensin-rich walls of tomato and sycamore cell suspension culture, wherein extensin precursors are insolubilized into the wall by undefined crosslinks. The authors recent work with cell walls isolated from intact tissue as well as walls from suspension cultured cells of the graminaceous monocots maize and rice, the non-graminaceous monocot asparagus, the primitive herbaceous dicot sugar beet, and the gymnosperm Douglas Fir indicate that although extensins are ubiquitous to all plant species examined, they are not the major structural protein component of most walls examined. Amino acid analyses of intact and HF-treated walls shows a major component neither an HRGP, nor directly comparable to the glycine-rich wall proteins such as those associated with seed coat walls or the 67 mole% glycine-rich proteins cloned from petunia and soybean. Clearly, structural wall protein alternatives to extensin exist and any cell wall model must take that into account. If we assume that extracellular matrices are a priori network structures, then new Hypless' structural proteins in the maize cell wall raise questions about the sort of network these proteins create: the kinds of crosslinks involved; how they are formed; and the roles played by the small amounts of HRGPs.

  12. Halogenation of microcapsule walls

    Science.gov (United States)

    Davis, T. R.; Schaab, C. K.; Scott, J. C.

    1972-01-01

    Procedure for halogenation of confining walls of both gelatin and gelatin-phenolic resin capsules is similar to that used for microencapsulation. Ten percent halogen content renders capsule wall nonburning; any higher content enhances flame-retardant properties of selected internal phase material. Halogenation decreases permeability of wall material to encapsulated materials.

  13. Abdominal wall fat pad biopsy

    Science.gov (United States)

    Amyloidosis - abdominal wall fat pad biopsy; Abdominal wall biopsy; Biopsy - abdominal wall fat pad ... method of taking an abdominal wall fat pad biopsy . The health care provider cleans the skin on ...

  14. Liquid Wall Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Meier, W R

    2011-02-24

    The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

  15. Solar heating wall

    Energy Technology Data Exchange (ETDEWEB)

    Schoenfelder, J.L.

    1983-08-16

    A solar heating wall is disclosed including a water pipe circulation system having a plurality of separate tubes, each formed as a loop, connected between a water supply and a return. The separate tubes are arranged in a single vertical plane at the approximate center of the wall. The wall is formed within a frame which is packed with a material suited for use as a thERMAL RESERVOIR, SUCH AS concrete. The frame provides extra support by having a series of horizontally disposed cross supports on one surface of the wall and a series of vertically disposed cross supports on the opposite surface A pressure relief valve may be provided between the water supply to the separate tubes and the water supply to the building or structure containing the solar wall, so that the solar wall can be adapted for use with a city water system.

  16. Cell Wall Proteome

    OpenAIRE

    Boudart, Georges; Minic, Zoran; Albenne, Cécile; Canut, Hervé; Jamet, Elisabeth; Pont-Lezica, Rafael F

    2007-01-01

    In this chapter, we will focus on the contribution of proteomics to the identification and determination of the structure and function of CWPs as well as discussing new perspectives in this area. The great variety of proteins found in the plant cell wall is described. Some families, such as glycoside hydrolases, proteases, lectins, and inhibitors of cell wall modifying enzymes, are discussed in detail. Examples of the use of proteomic techniques to elucidate the structure of various cell wall...

  17. Staggered domain wall fermions

    CERN Document Server

    Hoelbling, Christian

    2016-01-01

    We construct domain wall fermions with a staggered kernel and investigate their spectral and chiral properties numerically in the Schwinger model. In some relevant cases we see an improvement of chirality by more than an order of magnitude as compared to usual domain wall fermions. Moreover, we present first results for four-dimensional quantum chromodynamics, where we also observe significant reductions of chiral symmetry violations for staggered domain wall fermions.

  18. Green walls in Vancouver

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, R. [Sharp and Diamond Landscape Architecture Inc., Vancouver, BC (Canada)

    2007-07-01

    With the renewed interest in design for microclimate control and energy conservation, many cities are implementing clean air initiatives and sustainable planning policies to mitigate the effects of urban climate and the urban heat island effect. Green roofs, sky courts and green walls must be thoughtfully designed to withstand severe conditions such as moisture stress, extremes in temperature, tropical storms and strong desiccating winds. This paper focused on the installation of green wall systems. There are 2 general types of green walls systems, namely facade greening and living walls. Green facades are trellis systems where climbing plants can grow vertically without attaching to the surface of the building. Living walls are part of a building envelope system where plants are actually planted and grown in a wall system. A modular G-SKY Green Wall Panel was installed at the Aquaquest Learning Centre at the Vancouver Aquarium in Stanley Park in September 2006. This green wall panel, which was originally developed in Japan, incorporates many innovative features in the building envelope. It provides an exterior wall covered with 8 species of plants native to the Coastal Temperate Rain Forest. The living wall is irrigated by rainwater collected from the roof, stored in an underground cistern and fed through a drip irrigation system. From a habitat perspective, the building imitates an escarpment. Installation, support systems, irrigation, replacement of modules and maintenance are included in the complete wall system. Living walls reduce the surface temperature of buildings by as much as 10 degrees C when covered with vegetation and a growing medium. The project team is anticipating LEED gold certification under the United States-Canada Green Building Council. It was concluded that this technology of vegetated building envelopes is applicable for acoustical control at airports, biofiltration of indoor air, greywater treatment, and urban agriculture and vertical

  19. International Divider Walls

    NARCIS (Netherlands)

    Kruis, A.; Sneller, A.C.W.(L.)

    2013-01-01

    The subject of this teaching case is the Enterprise Resource Planning (ERP) system implementation at International Divider Walls, the world market leader in design, production, and sales of divider walls. The implementation in one of the divisions of this multinational company had been successful, a

  20. Domain wall filters

    CERN Document Server

    Bär, O; Neuberger, H; Witzel, O; Baer, Oliver; Narayanan, Rajamani; Neuberger, Herbert; Witzel, Oliver

    2007-01-01

    We propose using the extra dimension separating the domain walls carrying lattice quarks of opposite handedness to gradually filter out the ultraviolet fluctuations of the gauge fields that are felt by the fermionic excitations living in the bulk. This generalization of the homogeneous domain wall construction has some theoretical features that seem nontrivial.

  1. Thin Wall Iron Castings

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Cuttino; D.M. Stefanescu; T.S. Piwonka

    2001-10-31

    Results of an investigation made to develop methods of making iron castings having wall thicknesses as small as 2.5 mm in green sand molds are presented. It was found that thin wall ductile and compacted graphite iron castings can be made and have properties consistent with heavier castings. Green sand molding variables that affect casting dimensions were also identified.

  2. International Divider Walls

    NARCIS (Netherlands)

    Kruis, A.; Sneller, A.C.W.(L.)

    2013-01-01

    The subject of this teaching case is the Enterprise Resource Planning (ERP) system implementation at International Divider Walls, the world market leader in design, production, and sales of divider walls. The implementation in one of the divisions of this multinational company had been successful,

  3. Hard and soft walls

    CERN Document Server

    Milton, Kimball A

    2011-01-01

    In a continuing effort to understand divergences which occur when quantum fields are confined by bounding surfaces, we investigate local energy densities (and the local energy-momentum tensor) in the vicinity of a wall. In this paper, attention is largely confined to a scalar field. If the wall is an infinite Dirichlet plane, well known volume and surface divergences are found, which are regulated by a temporal point-splitting parameter. If the wall is represented by a linear potential in one coordinate $z$, the divergences are softened. The case of a general wall, described by a potential of the form $z^\\alpha$ for $z>0$ is considered. If $\\alpha>2$, there are no surface divergences, which in any case vanish if the conformal stress tensor is employed. Divergences within the wall are also considered.

  4. "I Climbed the Great Wall"

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    I finally climbed the Great Wall, A dream of my childhood; my heart is filled with pleasure at the indescribable beauty of the Wall. China’s ancient civilization is best documented by the grandeur of the Wall.

  5. Advanced walling systems

    CSIR Research Space (South Africa)

    De Villiers, A

    2010-01-01

    Full Text Available The question addressed by this chapter is: How should advanced walling systems be planned, designed, built, refurbished, and end their useful lives, to classify as smart, sustainable, green or eco-building environments?...

  6. Conducting Wall Hall Thrusters

    Science.gov (United States)

    Goebel, Dan M.; Hofer, Richard R.; Mikellides, Ioannis G.; Katz, Ira; Polk, James E.; Dotson, Brandon

    2013-01-01

    A unique configuration of the magnetic field near the wall of Hall thrusters, called Magnetic Shielding, has recently demonstrated the ability to significantly reduce the erosion of the boron nitride (BN) walls and extend the life of Hall thrusters by orders of magnitude. The ability of magnetic shielding to minimize interactions between the plasma and the discharge chamber walls has for the first time enabled the replacement of insulating walls with conducting materials without loss in thruster performance. The boron nitride rings in the 6 kW H6 Hall thruster were replaced with graphite that self-biased to near the anode potential. The thruster efficiency remained over 60% (within two percent of the baseline BN configuration) with a small decrease in thrust and increase in Isp typical of magnetically shielded Hall thrusters. The graphite wall temperatures decreased significantly compared to both shielded and unshielded BN configurations, leading to the potential for higher power operation. Eliminating ceramic walls makes it simpler and less expensive to fabricate a thruster to survive launch loads, and the graphite discharge chamber radiates more efficiently which increases the power capability of the thruster compared to conventional Hall thruster designs.

  7. Where are the Walls?

    CERN Document Server

    Olive, Keith A; Peterson, Adam J

    2012-01-01

    The reported spatial variation in the fine-structure constant at high redshift, if physical, could be due to the presence of dilatonic domains, and one or more domain walls inside our horizon. An absorption spectrum of an object in a different domain from our own would be characterized by a different value of alpha. We show that while a single wall solution is statically comparable to a dipole fit, and is a big improvement over a weighted mean (despite adding 3 parameters), a two-wall solution is a far better fit (despite adding 3 parameters over the single wall solution). We derive a simple model accounting for the two-domain wall solution. The goodness of these fits is however dependent on the extra random error which was argued to account for the large scatter in most of the data. When this error is omitted, all the above solutions are poor fits to the data. When included, the solutions that exhibit a spatial dependence agree with the data much more significantly than the Standard Model; however, the Stand...

  8. Mouse bladder wall injection.

    Science.gov (United States)

    Fu, Chi-Ling; Apelo, Charity A; Torres, Baldemar; Thai, Kim H; Hsieh, Michael H

    2011-07-12

    Mouse bladder wall injection is a useful technique to orthotopically study bladder phenomena, including stem cell, smooth muscle, and cancer biology. Before starting injections, the surgical area must be cleaned with soap and water and antiseptic solution. Surgical equipment must be sterilized before use and between each animal. Each mouse is placed under inhaled isoflurane anesthesia (2-5% for induction, 1-3% for maintenance) and its bladder exposed by making a midline abdominal incision with scissors. If the bladder is full, it is partially decompressed by gentle squeezing between two fingers. The cell suspension of interest is intramurally injected into the wall of the bladder dome using a 29 or 30 gauge needle and 1 cc or smaller syringe. The wound is then closed using wound clips and the mouse allowed to recover on a warming pad. Bladder wall injection is a delicate microsurgical technique that can be mastered with practice.

  9. Axion domain wall baryogenesis

    Energy Technology Data Exchange (ETDEWEB)

    Daido, Ryuji; Kitajima, Naoya [Department of Physics, Tohoku University,Sendai 980-8578 (Japan); Takahashi, Fuminobu [Department of Physics, Tohoku University,Sendai 980-8578 (Japan); Kavli IPMU, TODIAS, University of Tokyo,Kashiwa 277-8583 (Japan)

    2015-07-28

    We propose a new scenario of baryogenesis, in which annihilation of axion domain walls generates a sizable baryon asymmetry. Successful baryogenesis is possible for a wide range of the axion mass and decay constant, m≃10{sup 8}–10{sup 13} GeV and f≃10{sup 13}–10{sup 16} GeV. Baryonic isocurvature perturbations are significantly suppressed in our model, in contrast to various spontaneous baryogenesis scenarios in the slow-roll regime. In particular, the axion domain wall baryogenesis is consistent with high-scale inflation which generates a large tensor-to-scalar ratio within the reach of future CMB B-mode experiments. We also discuss the gravitational waves produced by the domain wall annihilation and its implications for the future gravitational wave experiments.

  10. Congenital Abdominal Wall Defects

    DEFF Research Database (Denmark)

    Risby, Kirsten; Jakobsen, Marianne Skytte; Qvist, Niels

    2016-01-01

    complications were seen in five (15%) children: four had detachment of the mesh and one patient developed abdominal compartment syndrome. Mesh related clinical infection was observed in five children. In hospital mortality occurred in four cases (2 gastroschisis and 2 omphalocele) and was not procedure......OBJECTIVE: To evaluate the clinical utility of GORE® DUALMESH (GDM) in the staged closure of large congenital abdominal wall defects. MATERIALS AND METHODS: Data of patients with congenital abdominal wall defects managed with GDM was analyzed for outcome regarding complete fascial closure; mesh...

  11. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  12. Moisture Research - Optimizing Wall Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Arena, Lois [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Mantha, Pallavi [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2013-05-01

    In this project, the Consortium for Advanced Residential Buildings (CARB) team evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls. Wall assemblies evaluated included code minimum walls using spray foam insulation and fiberglass batts, high R-value walls at least 12 in. thick (R-40 and R-60 assemblies), and brick walls with interior insulation.

  13. High-R Walls for Remodeling: Wall Cavity Moisture Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Wiehagen, J.; Kochkin, V.

    2012-12-01

    The focus of the study is on the performance of wall systems, and in particular, the moisture characteristics inside the wall cavity and in the wood sheathing. Furthermore, while this research will initially address new home construction, the goal is to address potential moisture issues in wall cavities of existing homes when insulation and air sealing improvements are made.

  14. High-R Walls for Remodeling. Wall Cavity Moisture Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Wiehagen, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Kochkin, V. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

    2012-12-01

    The focus of the study is on the performance of wall systems, and in particular, the moisture characteristics inside the wall cavity and in the wood sheathing. Furthermore, while this research will initially address new home construction, the goal is to address potential moisture issues in wall cavities of existing homes when insulation and air sealing improvements are made.

  15. Occupy Wall Street

    DEFF Research Database (Denmark)

    Jensen, Michael J.; Bang, Henrik

    2013-01-01

    This article analyzes the political form of Occupy Wall Street on Twitter. Drawing on evidence contained within the profiles of over 50,000 Twitter users, political identities of participants are characterized using natural language processing. The results find evidence of a traditional oppositio......This article analyzes the political form of Occupy Wall Street on Twitter. Drawing on evidence contained within the profiles of over 50,000 Twitter users, political identities of participants are characterized using natural language processing. The results find evidence of a traditional...... oppositional social movement alongside a legitimizing countermovement, but also a new notion of political community as an ensemble of discursive practices that are endogenous to the constitution of political regimes from the “inside out.” These new political identities are bound by thin ties of political...

  16. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding...... were removed in some of the elements to simulate damaged vapour barriers. The condition of the wind barriers of elements with intact vapour barriers was inspected from the inside after four years of exposure. This paper presents results with emphasis on the moisture conditions behind the wind barrier....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  17. Space, composition, vertical wall ...

    OpenAIRE

    Despot, Katerina; Sandeva, Vaska

    2016-01-01

    The space in which it is an integral segment of our life is nourished with many functional and decorative elements. One aspect for consideration of vertical walls or The vertical gardens and their aesthetic impact in space called function. Vertical gardens bordering the decoration to totally functional garden in areas where there is little oxygen and space, ideal for residential buildings and public spaces where missing greenery, special place occupies in interior design where their expres...

  18. Scalable Resolution Display Walls

    KAUST Repository

    Leigh, Jason

    2013-01-01

    This article will describe the progress since 2000 on research and development in 2-D and 3-D scalable resolution display walls that are built from tiling individual lower resolution flat panel displays. The article will describe approaches and trends in display hardware construction, middleware architecture, and user-interaction design. The article will also highlight examples of use cases and the benefits the technology has brought to their respective disciplines. © 1963-2012 IEEE.

  19. Wall Street som kreationistisk forkynder

    DEFF Research Database (Denmark)

    Ekman, Susanne

    2016-01-01

    Artiklen gennemgår Karen Hos etnografi om Wall Street: "Liquidated: An ethnography of Wall Street" set i lyset af den offentlige debat vedrørende Goldman Sachs opkøb af Dong......Artiklen gennemgår Karen Hos etnografi om Wall Street: "Liquidated: An ethnography of Wall Street" set i lyset af den offentlige debat vedrørende Goldman Sachs opkøb af Dong...

  20. Light shining through walls

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Javier [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Max-Planck-Institut fuer Physik, Muenchen (Germany); Ringwald, Andreas [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2010-11-15

    Shining light through walls? At first glance this sounds crazy. However, very feeble gravitational and electroweak effects allow for this exotic possibility. Unfortunately, with present and near future technologies the opportunity to observe light shining through walls via these effects is completely out of question. Nevertheless there are quite a number of experimental collaborations around the globe involved in this quest. Why are they doing it? Are there additional ways of sending photons through opaque matter? Indeed, various extensions of the standard model of particle physics predict the existence of new particles called WISPs - extremely weakly interacting slim particles. Photons can convert into these hypothetical particles, which have no problems to penetrate very dense materials, and these can reconvert into photons after their passage - as if light was effectively traversing walls. We review this exciting field of research, describing the most important WISPs, the present and future experiments, the indirect hints from astrophysics and cosmology pointing to the existence of WISPs, and finally outlining the consequences that the discovery of WISPs would have. (orig.)

  1. Molded Concrete Center Mine Wall

    Science.gov (United States)

    Lewis, E. V.

    1987-01-01

    Proposed semiautomatic system forms concrete-foam wall along middle of coal-mine passage. Wall helps support roof and divides passage into two conduits needed for ventilation of coal face. Mobile mold and concrete-foam generator form sections of wall in place.

  2. Cell Wall Biology: Perspectives from Cell Wall Imaging

    Institute of Scientific and Technical Information of China (English)

    Kieran J.D.Lee; Susan E.Marcus; J.Paul Knox

    2011-01-01

    Polysaccharide-rich plant cell walls are important biomaterials that underpin plant growth,are major repositories for photosynthetically accumulated carbon,and,in addition,impact greatly on the human use of plants. Land plant cell walls contain in the region of a dozen major polysaccharide structures that are mostly encompassed by cellulose,hemicelluloses,and pectic polysaccharides. During the evolution of land plants,polysaccharide diversification appears to have largely involved structural elaboration and diversification within these polysaccharide groups. Cell wall chemistry is well advanced and a current phase of cell wall science is aimed at placing the complex polysaccharide chemistry in cellular contexts and developing a detailed understanding of cell wall biology. Imaging cell wall glycomes is a challenging area but recent developments in the establishment of cell wall molecular probe panels and their use in high throughput procedures are leading to rapid advances in the molecular understanding of the spatial heterogeneity of individual cell walls and also cell wall differences at taxonomic levels. The challenge now is to integrate this knowledge of cell wall heterogeneity with an understanding of the molecular and physiological mechanisms that underpin cell wall properties and functions.

  3. Canal Wall Reconstruction Mastoidectomy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective To investigate the advantages of canal wall reconstruction (CWR) mastoidectomy, a single-stage technique for cholesteatoma removal and posterior external canal wall reconstruction, over the open and closed procedures in terms of cholesteatoma recurrence. Methods: Between June 2002 and December 2005, 38 patients (40 ears) with cholesteatoma were admited to Sun Yat-Sen Memorial Hospital and received surgical treatments. Of these patients, 25 were male with ages ranging between 11 and 60 years (mean = 31.6 years) and 13 were female with ages ranging between 20 and 65 years (mean = 38.8 years). Canal wall reconstruction (CWR)mastoidectomy was performed in 31 ears and canal wall down (CWD) mastoidectomy in 9 ears. Concha cartilage was used for ear canal wall reconstruction in 22 of the 31 CWR procedures and cortical mastoid bone was used in the remaining 9 cases. Results At 0.5 to 4 years follow up, all but one patients remained free of signs of cholesteatoma recurrence, i.e., no retraction pocket or cholesteatoma matrix. One patient, a smoker, needed revision surgery due to cholesteatoma recurrence 1.5 year after the initial operation. The recurrence rate was therefore 3.2% (1/31). Cholesteatoma recurrence was monitored using postoperative CT scans whenever possible. In the case that needed a revision procedure, a retraction pocket was identified by otoendoscopy in the pars flacida area that eventually evolved into a cholesteatoma. A pocket extending to the epitympanum filled with cholesteatoma matrix was confirmed during the revision operation, A decision to perform a modified mastoidectomy was made as the patient refused to quit smoking. The mean air-bone gap in pure tone threshold was 45 dB before surgery and 25 dB after (p < 0.05). There was no difference between using concha cartilage and cortical mastoid bone for the reconstruction regarding air-bone gap improvement, CT findings and otoendoscopic results. Conclusion CWR mastoidectomy can be used for

  4. Left ventricular wall stress compendium.

    Science.gov (United States)

    Zhong, L; Ghista, D N; Tan, R S

    2012-01-01

    Left ventricular (LV) wall stress has intrigued scientists and cardiologists since the time of Lame and Laplace in 1800s. The left ventricle is an intriguing organ structure, whose intrinsic design enables it to fill and contract. The development of wall stress is intriguing to cardiologists and biomedical engineers. The role of left ventricle wall stress in cardiac perfusion and pumping as well as in cardiac pathophysiology is a relatively unexplored phenomenon. But even for us to assess this role, we first need accurate determination of in vivo wall stress. However, at this point, 150 years after Lame estimated left ventricle wall stress using the elasticity theory, we are still in the exploratory stage of (i) developing left ventricle models that properly represent left ventricle anatomy and physiology and (ii) obtaining data on left ventricle dynamics. In this paper, we are responding to the need for a comprehensive survey of left ventricle wall stress models, their mechanics, stress computation and results. We have provided herein a compendium of major type of wall stress models: thin-wall models based on the Laplace law, thick-wall shell models, elasticity theory model, thick-wall large deformation models and finite element models. We have compared the mean stress values of these models as well as the variation of stress across the wall. All of the thin-wall and thick-wall shell models are based on idealised ellipsoidal and spherical geometries. However, the elasticity model's shape can vary through the cycle, to simulate the more ellipsoidal shape of the left ventricle in the systolic phase. The finite element models have more representative geometries, but are generally based on animal data, which limits their medical relevance. This paper can enable readers to obtain a comprehensive perspective of left ventricle wall stress models, of how to employ them to determine wall stresses, and be cognizant of the assumptions involved in the use of specific models.

  5. Strengthening of Shear Walls

    DEFF Research Database (Denmark)

    Hansen, Christian Skodborg

    -plane loaded walls and disks is however not included in any guidelines, and only a small fraction of scientists have initiated research within this topic. Furthermore, studies of the principal behavior and response of a strengthened disk has not yet been investigated satisfactorily, and this is the principal...... be altered to fit the surrounding boundary conditions. The effective cohesive law will then become a function of the investigated structural geometry. A simplified approach for the latter topic was used to predict the load capacity of concrete beams in shear. Results obtained were acceptable, but the model...

  6. Axions from wall decay

    Energy Technology Data Exchange (ETDEWEB)

    Chang, S; Hagmann, C; Sikivie, P

    2001-01-08

    The authors discuss the decay of axion walls bounded by strings and present numerical simulations of the decay process. In these simulations, the decay happens immediately, in a time scale of order the light travel time, and the average energy of the radiated axions is {approx_equal} 7m{sub a} for v{sub a}/m{sub a} {approx_equal} 500. is found to increase approximately linearly with ln(v{sub a}/m{sub a}). Extrapolation of this behavior yields {approx_equal} 60 m{sub a} in axion models of interest.

  7. Abdominal wall endometriosis.

    Science.gov (United States)

    Upadhyaya, P; Karak, A K; Sinha, A K; Kumar, B; Karki, S; Agarwal, C S

    2010-01-01

    Endometriosis of abdominal wall scar following operation on uterus and tubes is extremely rare. The late onset of symptoms after surgery is the usual cause of misdiagnosis. Scar endometriosis is a rare disease which is difficult to diagnose and should always be considered as a differential diagnosis of painful abdominal masses in women. The diagnosis is made only after excision and histopathology of the lesion. Preoperative differentials include hernia, lipoma, suture granuloma or abscess. Hence an awareness of the entity avoids delay in diagnosis, helps clinicians to a more tailored treatment and also avoids unnecessary referrals. We report a case of abdominal endometriosis. The definitive diagnosis of which was established by histopathological studies.

  8. Abdominal wall blocks in adults

    DEFF Research Database (Denmark)

    Børglum, Jens; Gögenür, Ismail; Bendtsen, Thomas F

    2016-01-01

    Purpose of review Abdominal wall blocks in adults have evolved much during the last decade; that is, particularly with the introduction of ultrasound-guided (USG) blocks. This review highlights recent advances of block techniques within this field and proposes directions for future research.......  Recent findings Ultrasound guidance is now considered the golden standard for abdominal wall blocks in adults, even though some landmark-based blocks are still being investigated. The efficiency of USG transversus abdominis plane blocks in relation to many surgical procedures involving the abdominal wall...... been introduced with success. Future research should also investigate the effect of specific abdominal wall blocks on neuroendocrine and inflammatory stress response after surgery.  Summary USG abdominal wall blocks in adults are commonplace techniques today. Most abdominal wall blocks are assigned...

  9. Structure of axionic domain walls

    Science.gov (United States)

    Huang, M. C.; Sikivie, P.

    1985-09-01

    The structure of axionic domain walls is investigated using the low-energy effective theory of axions and pions. We derive the spatial dependence of the phases of the Peccei-Quinn scalar field and the QCD quark-antiquark condensates inside an axionic domain wall. Thence an accurate estimate of the wall surface energy density is obtained. The equations of motion for axions, photons, leptons, and baryons in the neighborhood of axionic domain walls are written down and estimates are given for the wall reflection and transmission coefficients of these particles. Finally, we discuss the energy dissipation by axionic domain walls oscillating in the early universe due to the reflection of particles in the primordial soup.

  10. Structure of axionic domain walls

    Energy Technology Data Exchange (ETDEWEB)

    Huang, M.C.; Sikivie, P.

    1985-09-15

    The structure of axionic domain walls is investigated using the low-energy effective theory of axions and pions. We derive the spatial dependence of the phases of the Peccei-Quinn scalar field and the QCD quark-antiquark condensates inside an axionic domain wall. Thence an accurate estimate of the wall surface energy density is obtained. The equations of motion for axions, photons, leptons, and baryons in the neighborhood of axionic domain walls are written down and estimates are given for the wall reflection and transmission coefficients of these particles. Finally, we discuss the energy dissipation by axionic domain walls oscillating in the early universe due to the reflection of particles in the primordial soup.

  11. Asymptotic Dynamics of Monopole Walls

    CERN Document Server

    Cross, R

    2015-01-01

    We determine the asymptotic dynamics of the U(N) doubly periodic BPS monopole in Yang-Mills-Higgs theory, called a monopole wall, by exploring its Higgs curve using the Newton polytope and amoeba. In particular, we show that the monopole wall splits into subwalls when any of its moduli become large. The long-distance gauge and Higgs field interactions of these subwalls are abelian, allowing us to derive an asymptotic metric for the monopole wall moduli space.

  12. Dynamical domain wall and localization

    Directory of Open Access Journals (Sweden)

    Yuta Toyozato

    2016-03-01

    Full Text Available Based on the previous works (Toyozato et al., 2013 [24]; Higuchi and Nojiri, 2014 [25], we investigate the localization of the fields on the dynamical domain wall, where the four-dimensional FRW universe is realized on the domain wall in the five-dimensional space–time. Especially we show that the chiral spinor can localize on the domain wall, which has not been succeeded in the past works as the seminal work in George et al. (2009 [23].

  13. Diplopia and orbital wall fractures

    NARCIS (Netherlands)

    Boffano, P.; Roccia, F.; Gallesio, C.; Karagozoglu, K.H.; Forouzanfar, T.

    2014-01-01

    Diplopia is a symptom that is frequently associated with orbital wall fractures. The aim of this article was to present the incidence and patterns of diplopia after orbital wall blow-out fractures in 2 European centers, Turin and Amsterdam, and to identify any correlation between this symptom and su

  14. Domain Walls in SU(5)

    CERN Document Server

    Poghosian, L E; Pogosian, Levon; Vachaspati, Tanmay

    2000-01-01

    We consider the Grand Unified SU(5) model with a small or vanishing cubic term in the adjoint scalar field in the potential. This gives the model an approximate or exact Z$_2$ symmetry whose breaking leads to domain walls. The simplest domain wall has the structure of a kink across which the Higgs field changes sign ($\\Phi \\to -\\Phi$) and inside which the full SU(5) is restored. The kink is shown to be perturbatively unstable for all parameters. We then construct a domain wall solution that is lighter than the kink and show it to be perturbatively stable for a range of parameters. The symmetry in the core of this domain wall is smaller than that outside. The interactions of the domain wall with magnetic monopole is discussed and it is shown that magnetic monopoles with certain internal space orientations relative to the wall pass through the domain wall. Magnetic monopoles in other relative internal space orientations are likely to be swept away on collision with the domain walls, suggesting a scenario where ...

  15. Solar Walls in tsbi3

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne

    tsbi3 is a user-friendly and flexible computer program, which provides support to the design team in the analysis of the indoor climate and the energy performance of buildings. The solar wall module gives tsbi3 the capability of simulating solar walls and their interaction with the building. This...

  16. Control of Wall Mounting Robot

    DEFF Research Database (Denmark)

    Sloth, Christoffer; Pedersen, Rasmus

    2017-01-01

    This paper presents a method for designing controllers for trajectory tracking with actuator constraints. In particular, we consider a joystick-controlled wall mounting robot called WallMo. In contrast to previous works, a model-free approach is taken to the control problem, where the path...

  17. The "Brick Wall" Graphic Organizer

    Science.gov (United States)

    Matteson, Shirley M.

    2016-01-01

    A brick wall provides a fitting description of what happens when teachers try to teach a concept for which students are unprepared. When students are unsuccessful academically, their foundational knowledge may be missing, incomplete, or incorrect. As a result, students "hit a brick wall," and their academic progress stops because they do…

  18. Diplopia and orbital wall fractures

    NARCIS (Netherlands)

    Boffano, P.; Roccia, F.; Gallesio, C.; Karagozoglu, K.H.; Forouzanfar, T.

    2014-01-01

    Diplopia is a symptom that is frequently associated with orbital wall fractures. The aim of this article was to present the incidence and patterns of diplopia after orbital wall blow-out fractures in 2 European centers, Turin and Amsterdam, and to identify any correlation between this symptom and

  19. Moisture Research - Optimizing Wall Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Arena, L.; Mantha, P.

    2013-05-01

    The Consortium for Advanced Residential Buildings (CARB) evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls.

  20. Domain wall description of superconductivity

    CERN Document Server

    Brito, F A; Silva, J C M

    2012-01-01

    In the present work we shall address the issue of electrical conductivity in superconductors in the perspective of superconducting domain wall solutions in the realm of field theory. We take our set up made out of a dynamical complex scalar field coupled to gauge field to be responsible for superconductivity and an extra scalar real field that plays the role of superconducting domain walls. The temperature of the system is interpreted as the parameter to move type I to type II domain walls. Alternatively, this means that the domain wall surface is suffering an acceleration as one goes from one type to another. On the other hand, changing from type I to type II state means a formation of a condensate what is in perfect sense of lowering the temperature around the superconductor. One can think of this scenario as an analog of holographic scenarios where this set up is replaced by a black hole near the domain wall.

  1. Channel Wall Landslides

    Science.gov (United States)

    2005-01-01

    [figure removed for brevity, see original site] The multiple landslides in this VIS image occur along a steep channel wall. Note the large impact crater in the context image. The formation of the crater may have initially weakened that area of the surface prior to channel formation. Image information: VIS instrument. Latitude -2.7, Longitude 324.8 East (35.2 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  2. Wall Shear Stress, Wall Pressure and Near Wall Velocity Field Relationships in a Whirling Annular Seal

    Science.gov (United States)

    Morrison, Gerald L.; Winslow, Robert B.; Thames, H. Davis, III

    1996-01-01

    The mean and phase averaged pressure and wall shear stress distributions were measured on the stator wall of a 50% eccentric annular seal which was whirling in a circular orbit at the same speed as the shaft rotation. The shear stresses were measured using flush mounted hot-film probes. Four different operating conditions were considered consisting of Reynolds numbers of 12,000 and 24,000 and Taylor numbers of 3,300 and 6,600. At each of the operating conditions the axial distribution (from Z/L = -0.2 to 1.2) of the mean pressure, shear stress magnitude, and shear stress direction on the stator wall were measured. Also measured were the phase averaged pressure and shear stress. These data were combined to calculate the force distributions along the seal length. Integration of the force distributions result in the net forces and moments generated by the pressure and shear stresses. The flow field inside the seal operating at a Reynolds number of 24,000 and a Taylor number of 6,600 has been measured using a 3-D laser Doppler anemometer system. Phase averaged wall pressure and wall shear stress are presented along with phase averaged mean velocity and turbulence kinetic energy distributions located 0.16c from the stator wall where c is the seal clearance. The relationships between the velocity, turbulence, wall pressure and wall shear stress are very complex and do not follow simple bulk flow predictions.

  3. Diplopia and orbital wall fractures.

    Science.gov (United States)

    Boffano, Paolo; Roccia, Fabio; Gallesio, Cesare; Karagozoglu, K Hakki; Forouzanfar, Tymour

    2014-01-01

    Diplopia is a symptom that is frequently associated with orbital wall fractures. The aim of this article was to present the incidence and patterns of diplopia after orbital wall blow-out fractures in 2 European centers, Turin and Amsterdam, and to identify any correlation between this symptom and such fractures. This study is based on 2 databases that have continuously recorded data of patients hospitalized with maxillofacial fractures between 2001 and 2010. On the whole, 447 patients (334 males, 113 females) with pure blow-out orbital wall fractures were included. The most frequently involved orbital site was the floor (359 fractures), followed by medial wall (41 fractures) and lateral wall (5 fractures). At presentation, 227 patients (50.7%) had evidence of diplopia. In particular, in most patients, a diplopia in all directions was referred (78 patients). Statistically significant associations were found between diplopia on eye elevation and orbital floor fractures (P diplopia and medial wall fractures (P diplopia on eye elevation and horizontal diplopia at presentation could be useful clinical indicators orbital floor and medial wall fractures, respectively.

  4. Green towers and green walls

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, R. [Sharp and Diamond Landscape Architecture and Planning, Vancouver, BC (Canada)

    2006-07-01

    North American cities face many major environmental and health issues such as urban heat island effect, the intensity of storms, microclimate around buildings, imperviousness of sites, poor air quality and increases in respiratory disease. Several new technologies are starting to address global impacts and community level issues as well as the personal health and comfort of building occupants. These include green towers, living walls, vegetated rooftops and ecological site developments. This paper examined these forms of eco-development and presented their benefits. It discussed green walls in Japan; green towers in Malaysia, Singapore and Great Britain; green facades of climbing plants; active living walls in Canada; and passive living walls in France and Canada. It also discussed thermal walls; thematic walls; vertical gardens and structured wildlife habitat. Last, it presented testing, monitoring, research and conclusions. The Centre for the Advancement of Green Roof Technology is setting up a program to test thermal performance, to assess plant survival and to monitor green walls at the British Columbia Institute of Technology in Vancouver, Canada as much of the research out of Japan is only available in Japanese script. It was concluded that green architecture can provide shade, food, rainwater, shelter for wildlife and mimic natural systems. 15 refs.

  5. OTVE combustor wall condition monitoring

    Science.gov (United States)

    Szemenyei, Brian; Nelson, Robert S.; Barkhoudarian, S.

    1989-01-01

    Conventional ultrasonics, eddy current, and electromagnetic acoustic transduction (EMAT) technologies were evaluated to determine their capability of measuring wall thickness/wear of individual cooling channels in test specimens simulating conditions in the throat region of an OTVE combustion chamber liner. Quantitative results are presented for the eddy current technology, which was shown to measure up to the optimum 20-mil wall thickness with near single channel resolution. Additional results demonstrate the capability of the conventional ultrasonics and EMAT technologies to detect a thinning or cracked wall. Recommendations for additional eddy current and EMAT development tests are presented.

  6. Economics of abdominal wall reconstruction.

    Science.gov (United States)

    Bower, Curtis; Roth, J Scott

    2013-10-01

    The economic aspects of abdominal wall reconstruction are frequently overlooked, although understandings of the financial implications are essential in providing cost-efficient health care. Ventral hernia repairs are frequently performed surgical procedures with significant economic ramifications for employers, insurers, providers, and patients because of the volume of procedures, complication rates, the significant rate of recurrence, and escalating costs. Because biological mesh materials add significant expense to the costs of treating complex abdominal wall hernias, the role of such costly materials needs to be better defined to ensure the most cost-efficient and effective treatments for ventral abdominal wall hernias.

  7. Juyongguan on the Great Wall

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Juyongguan Pass on the Great Wall,one ofthe most important strategic passes of the oldcapital Beijing,is now repaired and a goodplace for tourists to see ancient Chinesemilitary and cultural facilities,as well asbeautiful local scenery.

  8. Statistical characteristics of simulated walls

    CERN Document Server

    Demianski, M; Müller, V; Turchaninov, V I

    2000-01-01

    The large scale matter distribution in three different simulations of CDM models is investigated and compared with corresponding results of the Zel'dovich theory of nonlinear gravitational instability. We show that the basic characteristics of wall-like structure elements are well described by this theory, and that they can be expressed by the cosmological parameters and a few spectral moments of the perturbation spectrum. Therefore the characteristics of such elements provide reasonable estimates of these parameters. We show that the compressed matter is relaxed and gravitationally confined, what manifests itself in the existence of walls as (quasi)stationary structure elements with life time restricted by their disruption into high density clouds. The matter distribution is investigated both in the real and redshift spaces. In both cases almost the same particles form the walls, and we estimate differences in corresponding wall characteristics. The same methods are applied to several mock catalogues of 'gal...

  9. Nano magnetic vortex wall guide

    Directory of Open Access Journals (Sweden)

    H. Y. Yuan

    2015-11-01

    Full Text Available A concept of nano magnetic vortex wall guide is introduced. Two architectures are proposed. The first one is properly designed superlattices while the other one is bilayer nanostrips. The concept is verified by micromagnetic simulations. Both guides can prevent the vortex core in a magnetic vortex wall from colliding with sample surface so that the information stored in the vortex core can be preserved during its transportation from one location to another one through the guides.

  10. Actinomycosis - Left Post Chest Wall

    Directory of Open Access Journals (Sweden)

    Kafil Akhtar, M. Naim, S. Shamshad Ahmad, Nazoora Khan, Uroos Abedi, A.H. Khan*

    2008-01-01

    Full Text Available A forty year old female of weak body built presented with recurring small hard lumps in let posteriorchest wall for 3 years and discharging ulcers for 3 months duration. Clinically, the provisional diagnosiswas malignancy with secondary infection. FNAC showed features suggestive of dysplasia buthistopathology confirmed the diagnosis as actinomycosis. The present case is reported due to rare incidenceof actinomycosis at post chest wall with muscle involvement.

  11. CHEST WALL HAMARTOMA : Case Report

    OpenAIRE

    Gülden DİNİZ; Ortaç, Ragıp; Aktaş, Safiye; TEMİR, Günyüz; HOŞGÖR, Münevver; Karaca, İrfan

    2005-01-01

    A case of four-month – old girl diagnosed as chest wall hamartoma is presented. This entity is an extremely rare but characteristic lesion of the ribs usually presenting in the neonate or infant with a mass or respiratory symptoms. Complete sponraneous regression of the lesion has been reported. Recently conservative management of asymptomatic childiren was recommended. Although rare, this condition ought to be kept in mind while dealing with infantile chest wall masses to avoid an errone...

  12. CHEST WALL HAMARTOMA : Case Report

    OpenAIRE

    Gülden DİNİZ; Ortaç, Ragıp; Aktaş, Safiye; HOŞGÖR, Günyüz TEMİR2Münevver; Karaca, İrfan

    2005-01-01

    A case of four-month – old girl diagnosed as chest wall hamartoma is presented. This entity is an extremely rare but characteristic lesion of the ribs usually presenting in the neonate or infant with a mass or respiratory symptoms. Complete sponraneous regression of the lesion has been reported. Recently conservative management of asymptomatic childiren was recommended. Although rare, this condition ought to be kept in mind while dealing with infantile chest wall masses to avoid...

  13. Permeable conformal walls and holography

    Science.gov (United States)

    Bachas, Constantin; de Boer, Jan; Dijkgraaf, Robbert; Ooguri, Hirosi

    2002-06-01

    We study conformal field theories in two dimensions separated by domain walls, which preserve at least one Virasoro algebra. We develop tools to study such domain walls, extending and clarifying the concept of `folding' discussed in the condensed-matter literature. We analyze the conditions for unbroken supersymmetry, and discuss the holographic duals in AdS3 when they exist. One of the interesting observables is the Casimir energy between a wall and an anti-wall. When these separate free scalar field theories with different target-space radii, the Casimir energy is given by the dilogarithm function of the reflection probability. The walls with holographic duals in AdS3 separate two sigma models, whose target spaces are moduli spaces of Yang-Mills instantons on T4 or K3. In the supergravity limit, the Casimir energy is computable as classical energy of a brane that connects the walls through AdS3. We compare this result with expectations from the sigma-model point of view.

  14. Permeable conformal walls and holography

    CERN Document Server

    Bachas, C P; Dijkgraaf, R; Ooguri, H

    2002-01-01

    We study conformal field theories in two dimensions separated by domain walls, which preserve at least one Virasoro algebra. We develop tools to study such domain walls, extending and clarifying the concept of `folding' discussed in the condensed-matter literature. We analyze the conditions for unbroken supersymmetry, and discuss the holographic duals in AdS3 when they exist. One of the interesting observables is the Casimir energy between a wall and an anti-wall. When these separate free scalar field theories with different target-space radii, the Casimir energy is given by the dilogarithm function of the reflection probability. The walls with holographic duals in AdS3 separate two sigma models, whose target spaces are moduli spaces of Yang-Mills instantons on T4 or K3. In the supergravity limit, the Casimir energy is computable as classical energy of a brane that connects the walls through AdS3. We compare this result with expectations from the sigma-model point of view.

  15. Wall force produced during disruptions

    Science.gov (United States)

    Strauss, H.; Paccagnella, R.; Breslau, J.

    2009-11-01

    The study of disruptions is of great importance for ITER. Previous work on disruptions [1] is extended to compute toroidally asymmetric wall force in ITER, using the M3D code. The disruptions are produced by n = 1 resistive wall modes or external kink modes. A thin wall resistive boundary model is used to calculate the wall forces. The symmetric wall force, produced by a VDE, and the asymmetric wall force, produced by n = 1 modes, are comparable in magnitude. It is found that the asymmetric and axisymmetric forces scale with the growth rate of the instability multiplied by the square of the current divided by magnetic field. A similar scaling was reported for VDEs in JET [2]. Numerically, the study of disruptions is very challenging. In the M3D extended MHD code, dealiasing was applied in the toroidal direction. Advection terms were treated with a numerical upwind method. These techniques provided sufficient numerical stability to simulate entire disruption events. [4pt] [1] R. Paccagnella, H. R. Strauss, and J. Breslau, Nucl. Fusion (2009) 49 035003. [2] V. Riccardo, T. C. Hender, P. J. Lomas, et al., Plasma Phys. Control. Fusion (2004)

  16. Effects of the flexibility of the arterial wall on the wall shear stresses and wall tension in Abdominal Aortic Aneurysms.

    Science.gov (United States)

    Salsac, Anne-Virginie; Fernandez, Miguel; Chomaz, Jean-Marc

    2005-11-01

    As an abdominal aortic aneurysm develops, large changes occur in the composition and structure of the arterial wall, which result in its stiffening. So far, most studies, whether experimental or numerical, have been conducted assuming the walls to be rigid. A numerical simulation of the fluid structure interactions is performed in different models of aneurysms in order to analyze the effects that the wall compliance might have on the flow topology. Both symmetric and non-symmetric models of aneurysms are considered, all idealistic in shape. The wall mechanical properties are varied in order to simulate the progressive stiffening of the walls. The spatial and temporal distributions of wall tension are calculated for the different values of the wall elasticity and compared to the results for the rigid walls. In the case of rigid walls, the calculation of the wall shear stresses and pressure compare very well with experimental results.

  17. Isolation of the Cell Wall.

    Science.gov (United States)

    Canut, Hervé; Albenne, Cécile; Jamet, Elisabeth

    2017-01-01

    This chapter describes a method allowing the purification of the cell wall for studying both polysaccharides and proteins. The plant primary cell wall is mainly composed of polysaccharides (90-95 % in mass) and of proteins (5-10 %). At the end of growth, specialized cells may synthesize a lignified secondary wall composed of polysaccharides (about 65 %) and lignin (about 35 %). Due to its composition, the cell wall is the cellular compartment having the highest density and this property is used for its purification. It plays critical roles during plant development and in response to environmental constraints. It is largely used in the food and textile industries as well as for the production of bioenergy. All these characteristics and uses explain why its study as a true cell compartment is of high interest. The proposed method of purification can be used for large amount of material but can also be downscaled to 500 mg of fresh material. Tools for checking the quality of the cell wall preparation, such as protein analysis and microscopy observation, are also provided.

  18. Abdominal wall hernia and pregnancy

    DEFF Research Database (Denmark)

    Jensen, K K; Henriksen, N A; Jorgensen, L N

    2015-01-01

    PURPOSE: There is no consensus as to the treatment strategy for abdominal wall hernias in fertile women. This study was undertaken to review the current literature on treatment of abdominal wall hernias in fertile women before or during pregnancy. METHODS: A literature search was undertaken in Pub......Med and Embase in combination with a cross-reference search of eligible papers. RESULTS: We included 31 papers of which 23 were case reports. In fertile women undergoing sutured or mesh repair, pain was described in a few patients during the last trimester of a subsequent pregnancy. Emergency surgery...... of incarcerated hernias in pregnant women, as well as combined hernia repair and cesarean section appears as safe procedures. No major complications were reported following hernia repair before or during pregnancy. The combined procedure of elective cesarean section and abdominal wall hernia repair was reported...

  19. Catalysts of plant cell wall loosening

    OpenAIRE

    Cosgrove, Daniel J.

    2016-01-01

    The growing cell wall in plants has conflicting requirements to be strong enough to withstand the high tensile forces generated by cell turgor pressure while selectively yielding to those forces to induce wall stress relaxation, leading to water uptake and polymer movements underlying cell wall expansion. In this article, I review emerging concepts of plant primary cell wall structure, the nature of wall extensibility and the action of expansins, family-9 and -12 endoglucanases, family-16 xyl...

  20. Diffusion-damped domain wall dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Varga, R; Infante, G [Inst. Phys., Fac. Sci., UPJS, Park Angelinum 9, 04154 Kosice (Slovakia); Badini-Confalonieri, G A; Vazquez, M, E-mail: rvarga@upjs.s [Instituto de Ciencia de Materiales de Madrid, CSIC, Cantoblanco, 28049, Madrid (Spain)

    2010-01-01

    In the given work, the influence of diffusional damping on the domain wall dynamics of heat treated FeSiBP microwires is presented. Two regions of the domain wall dynamics have been found. At low applied fields diffusion damping prevails, keeping the domain wall velocity and mobility low. At higher fields, the diffusional effects are overcomed and domain wall velocity increases steeply and so does the domain wall mobility.

  1. The DEMO wall load challenge

    Science.gov (United States)

    Wenninger, R.; Albanese, R.; Ambrosino, R.; Arbeiter, F.; Aubert, J.; Bachmann, C.; Barbato, L.; Barrett, T.; Beckers, M.; Biel, W.; Boccaccini, L.; Carralero, D.; Coster, D.; Eich, T.; Fasoli, A.; Federici, G.; Firdaouss, M.; Graves, J.; Horacek, J.; Kovari, M.; Lanthaler, S.; Loschiavo, V.; Lowry, C.; Lux, H.; Maddaluno, G.; Maviglia, F.; Mitteau, R.; Neu, R.; Pfefferle, D.; Schmid, K.; Siccinio, M.; Sieglin, B.; Silva, C.; Snicker, A.; Subba, F.; Varje, J.; Zohm, H.

    2017-04-01

    For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based on load estimates that are derived employing the most recent plasma edge physics knowledge. An initial assessment of the static wall heat load limit in DEMO infers that the steady state peak heat flux limit on the majority of the DEMO first wall should not be assumed to be higher than 1.0 MW m-2. This compares to an average wall heat load of 0.29 MW m-2 for the design {\\tt {EU}}{\\tt {~}}{\\tt {DEMO1}}{\\tt {~2015}} assuming a perfect homogeneous distribution. The main part of this publication concentrates on the development of first DEMO estimates for charged particle, radiation, fast particle (all static) and disruption heat loads. Employing an initial engineering wall design with clear optimization potential in combination with parameters for the flat-top phase (x-point configuration), loads up to 7 MW m-2 (penalty factor for tolerances etc not applied) have been calculated. Assuming a fraction of power radiated from the x-point region between 1/5 and 1/3, peaks of the total power flux density due to radiation of 0.6-0.8 MW m-2 are found in the outer baffle region. This first review of wall loads, and the associated limits in DEMO clearly underlines a significant challenge that necessitates substantial engineering efforts as well as a considerable consolidation of the associated physics basis.

  2. Wall conditioning of JET with the ITER-Like Wall

    NARCIS (Netherlands)

    Douai, D.; Brezinsek, S.; Esser, H. G.; Joffrin, E.; Keenan, T.; Knipe, S.; Kogut, D.; Lomas, P. J.; Marsen, S.; Nunes, I.; Philipps, V.; Pitts, R.A.; Shimada, M.; P. de Vries,

    2013-01-01

    The initial conditioning cycle of \\{JET\\} İLW\\} is analysed and compared with restart and operation in 2008 with a carbon dominated wall. Comparable water and oxygen decay times are observed during bake-out in both cases. Despite a 2 × 10−3 mbar l/s leak rate duri

  3. [Structure of the interalveolar wall].

    Science.gov (United States)

    Senelar, R

    1975-01-01

    The wall, which unites as well as separates two contiguous pulmonary alveoli is composed of: - a conjuntival partition, the veritable skeleton of the wall, which is occupied, to the largest extent, by capillary blood vessels. Between the capillaries, conjunctival cells are dispursed: fibrocytes, fibroblasts and histiocytes, of which some can be mobilised, transformed into macrophages, and penetrate into the alveolar lumen; - modified epithelial cells, whose very thin, vast expansions cover the conjunctival partition; - a liquid film, 0.2 mu in thickness, which separates the epithelial cells, or pneumocytes from the alveolar air. Numerous physiological implications result from this organisation.

  4. Domain wall description of superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Brito, F.A. [Departamento de Física, Universidade Federal de Campina Grande, Caixa Postal 10071, 58109-970 Campina Grande, Paraíba (Brazil); Freire, M.L.F. [Departamento de Física, Universidade Estadual da Paraíba, 58109-753 Campina Grande, Paraíba (Brazil); Mota-Silva, J.C. [Departamento de Física, Universidade Federal de Campina Grande, Caixa Postal 10071, 58109-970 Campina Grande, Paraíba (Brazil); Departamento de Física, Universidade Federal da Paraíba, Caixa Postal 5008, 58051-970 João Pessoa, Paraíba (Brazil)

    2014-01-20

    In the present work we shall address the issue of electrical conductivity in superconductors in the perspective of superconducting domain wall solutions in the realm of field theory. We take our set up made out of a dynamical complex scalar field coupled to gauge field to be responsible for superconductivity and an extra scalar real field that plays the role of superconducting domain walls. The temperature of the system is interpreted through the fact that the soliton following accelerating orbits is a Rindler observer experiencing a thermal bath.

  5. New Bricks in the Wall

    Institute of Scientific and Technical Information of China (English)

    RONG JIAOJIAO

    2007-01-01

    @@ Whenever a newcomer enters the classroom, he points at the wall. "Look at that!" says Li Shunye, indicating a picture of something that looks a bit like a pink furry fox, only with an oversized tail. "It's a squirrel," says the 9-year-old. "I made it."

  6. Designing a Sound Reducing Wall

    Science.gov (United States)

    Erk, Kendra; Lumkes, John; Shambach, Jill; Braile, Larry; Brickler, Anne; Matthys, Anna

    2015-01-01

    Acoustical engineers use their knowledge of sound to design quiet environments (e.g., classrooms and libraries) as well as to design environments that are supposed to be loud (e.g., concert halls and football stadiums). They also design sound barriers, such as the walls along busy roadways that decrease the traffic noise heard by people in…

  7. Solar Walls for concrete renovation

    DEFF Research Database (Denmark)

    Gramkow, Lotte; Vejen, Niels Kristian; Olsen, Lars

    1996-01-01

    This repport gives a short presentation of three full-scale testing solar walls, the construction including the architectural design, materials and components, transportation and storage of solar enegy, the effect on the construction behind, statics and practical experience.The results...

  8. Overlap/Domain-wall reweighting

    CERN Document Server

    Fukaya, H; Cossu, G; Hashimoto, S; Kaneko, T; Noaki, J

    2013-01-01

    We investigate the eigenvalues of nearly chiral lattice Dirac operators constructed with five-dimensional implementations. Allowing small violation of the Ginsparg-Wilson relation, the HMC simulation is made much faster while the eigenvalues are not significantly affected. We discuss the possibility of reweighting the gauge configurations generated with domain-wall fermions to those of exactly chiral lattice fermions.

  9. Wary Eyes Monitoring Wall Street

    Science.gov (United States)

    Jacobson, Linda

    2008-01-01

    School business officials kept a close watch on the financial markets this week--and on district investment portfolios and teacher-retirement funds--as stock prices gyrated and once-sound institutions got government bailouts or crumbled into bankruptcy. While financial observers said it was too soon to predict how Wall Street's upheaval might…

  10. Solar Walls for concrete renovation

    DEFF Research Database (Denmark)

    Gramkow, Lotte; Vejen, Niels Kristian; Olsen, Lars

    1996-01-01

    This repport gives a short presentation of three full-scale testing solar walls, the construction including the architectural design, materials and components, transportation and storage of solar enegy, the effect on the construction behind, statics and practical experience.The results of the mea...

  11. Fandom and the fourth wall

    Directory of Open Access Journals (Sweden)

    Jenna Kathryn Ballinger

    2014-09-01

    Full Text Available I use the Teen Wolf fandom as an example to examine the ways social media has created a more complicated, nuanced relationship with fans. The collapse of the fourth wall between fans and The Powers That Be can have both positive and negative impacts, depending on the willingness of participants to maintain mutual respect and engage in meaningful dialogue.

  12. Shear wall ultimate drift limits

    Energy Technology Data Exchange (ETDEWEB)

    Duffey, T.A. [Duffy, (T.A.) Tijeras, NM (United States); Goldman, A. [Goldman, (A.), Sandia, Los Alamos, NM (United States); Farrar, C.R. [Los Alamos National Lab., NM (United States)

    1994-04-01

    Drift limits for reinforced-concrete shear walls are investigated by reviewing the open literature for appropriate experimental data. Drift values at ultimate are determined for walls with aspect ratios ranging up to a maximum of 3.53 and undergoing different types of lateral loading (cyclic static, monotonic static, and dynamic). Based on the geometry of actual nuclear power plant structures exclusive of containments and concerns regarding their response during seismic (i.e.,cyclic) loading, data are obtained from pertinent references for which the wall aspect ratio is less than or equal to approximately 1, and for which testing is cyclic in nature (typically displacement controlled). In particular, lateral deflections at ultimate load, and at points in the softening region beyond ultimate for which the load has dropped to 90, 80, 70, 60, and 50 percent of its ultimate value, are obtained and converted to drift information. The statistical nature of the data is also investigated. These data are shown to be lognormally distributed, and an analysis of variance is performed. The use of statistics to estimate Probability of Failure for a shear wall structure is illustrated.

  13. Wary Eyes Monitoring Wall Street

    Science.gov (United States)

    Jacobson, Linda

    2008-01-01

    School business officials kept a close watch on the financial markets this week--and on district investment portfolios and teacher-retirement funds--as stock prices gyrated and once-sound institutions got government bailouts or crumbled into bankruptcy. While financial observers said it was too soon to predict how Wall Street's upheaval might…

  14. Designing a Sound Reducing Wall

    Science.gov (United States)

    Erk, Kendra; Lumkes, John; Shambach, Jill; Braile, Larry; Brickler, Anne; Matthys, Anna

    2015-01-01

    Acoustical engineers use their knowledge of sound to design quiet environments (e.g., classrooms and libraries) as well as to design environments that are supposed to be loud (e.g., concert halls and football stadiums). They also design sound barriers, such as the walls along busy roadways that decrease the traffic noise heard by people in…

  15. Statistical characteristics of simulated walls

    Science.gov (United States)

    Demiański, M.; Doroshkevich, A. G.; Müller, V.; Turchaninov, V.

    2000-11-01

    The large-scale matter distribution in three different simulations of CDM models is investigated and compared with corresponding results of the Zel'dovich theory of non-linear gravitational instability. We show that the basic characteristics of wall-like structure elements are well described by this theory, and that they can be expressed by the cosmological parameters and a few spectral moments of the perturbation spectrum. Therefore the characteristics of such elements provide reasonable estimates of these parameters. We show that the compressed matter is relaxed and gravitationally confined and manifests itself in the existence of walls as (quasi-)stationary structure elements with a lifetime restricted by their disruption into high-density clouds. The matter distribution is investigated in both real and redshift spaces. In both cases almost the same particles form the walls, and we estimate differences in corresponding wall characteristics. The same methods are applied to several mock catalogues of `galaxies', which allows us to characterize a large-scale bias between the spatial distribution of dark matter and of simulated `galaxies'.

  16. Partial domain wall partition functions

    CERN Document Server

    Foda, O

    2012-01-01

    We consider six-vertex model configurations on a rectangular lattice with n (N) horizontal (vertical) lines, and "partial domain wall boundary conditions" defined as 1. all 2n arrows on the left and right boundaries point inwards, 2. n_u (n_l) arrows on the upper (lower) boundary, such that n_u + n_l = N - n, also point inwards, 3. all remaining n+N arrows on the upper and lower boundaries point outwards, and 4. all spin configurations on the upper and lower boundaries are summed over. To generate (n-by-N) "partial domain wall configurations", one can start from A. (N-by-N) configurations with domain wall boundary conditions and delete n_u (n_l) upper (lower) horizontal lines, or B. (2n-by-N) configurations that represent the scalar product of an n-magnon Bethe eigenstate and an n-magnon generic state on an N-site spin-1/2 chain, and delete the n lines that represent the Bethe eigenstate. The corresponding "partial domain wall partition function" is computed in construction {A} ({B}) as an N-by-N (n-by-n) det...

  17. The Influence of Wall Binders

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    This report is an analysis of the thermal bridge effects that occur in wall binders in masonry buildings. The effects are analyzed using a numerical calculation programme.The results are compared to the values given in the danish standard, DS418....

  18. Chuck Close: "Off the Wall."

    Science.gov (United States)

    Gardner, Michael

    2001-01-01

    Describes the planning and design process of "Off the Wall," a student-developed CD-ROM multimedia project about the life and work of artist Chuck Close-the product of a studio-based course in Learning Experiments Design at the University of Georgia. The design includes an element of gaming; text is kept sparse; navigational elements are rendered…

  19. Rethinking China's new great wall

    National Research Council Canada - National Science Library

    Ma, Zhijun; Melville, David S; Liu, Jianguo; Chen, Ying; Yang, Hongyan; Ren, Wenwei; Zhang, Zhengwang; Piersma, Theunis; Li, Bo

    2014-01-01

    ... enclosed by thousands of kilometers of seawalls, whose length exceeds that of China’s famous ancient “Great Wall” (see photos and map). This new “Great Wall,” covering 60% of the total length of coast-line along mainland China...

  20. Thin Wall Austempered Ductile Iron (TWADI

    Directory of Open Access Journals (Sweden)

    M. Górny

    2009-07-01

    Full Text Available In this paper the analysis of thin walled castings made of ductile iron is considered. It is shown that thin wall austempered ductile iron can be obtained by means of short-term heat treatment of thin wall castings without addition of alloying elements. Metallographic examinations of 2 mm thin walled castings along with casting with thicker wall thickness (20x28 mm after different austempring conditions are presented. It has been proved that short-term heat treatment amounted 20 minutes of austenitizing at 880 oC followed by holding at 400 oC for 5 minutes causes ausferrite matrix in 2 mm wall thickness castings, while casting with thicker wall thickness remain untransformed and martensite is still present in a matrix. Finally there are shown that thin wall ductile iron is an excellent base material for austempering heat treatments. As a result high mechanical properties received in thin wall plates made of austempered ductile iron.

  1. PPOOLEX experiments on wall condensation

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2009-08-15

    This report summarizes the results of the wall condensation experiments carried out in December 2008 and January 2009 with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through a DN200 blowdown pipe to the condensation pool. Altogether five experiments, each consisting of several blows, were carried out. The main purpose of the experiment series was to study wall condensation phenomenon inside the dry well compartment while steam is discharged through it into the condensation pool and to produce comparison data for CFD calculations at VTT. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. For the wall condensation experiments the test facility was equipped with a system for collecting and measuring the amount of condensate from four different wall segments of the dry well compartment. A thermo graphic camera was used in a couple of experiments for filming the outside surface of the dry well wall. The effect of the initial temperature level of the dry well structures and of the steam flow rate for the accumulation of condensate was studied. The initial temperature level of the dry well structures varied from 23 to 99 deg. C. The steam flow rate varied from 90 to 690 g/s and the temperature of incoming steam from 115 to 160 deg. C. During the initial phase of steam discharge the accumulation of condensate was strongly controlled by the temperature level of the dry well structures; the lower the initial temperature level was the more condensate was accumulated. As the dry well structural temperatures increased the condensation process slowed down. Most of the condensate usually accumulated during the first 200 seconds of the discharge. However, the condensation process never completely stopped because a small temperature difference remained between the dry well atmosphere and inner wall

  2. Through-the-wall radar imaging

    CERN Document Server

    Amin, Moeness G

    2011-01-01

    Wall Attenuation and Dispersion, A. Hussein Muqaibel, M.A. Alsunaidi, Nuruddeen M. Iya, and A. Safaai-JaziAntenna Elements, Arrays, and Systems for Through-the-Wall Radar Imaging, A. Hoorfar and A. FathyBeamforming for Through-the-Wall Radar Imaging, G. Alli and D. DiFilippoImage and Localization of Behind-the-Wall Targets Using Collocated and Distributed Apertures, Y.D. Zhang and A. HuntConventional and Emerging Waveforms for Detection and Imaging of Targets behind Walls, F. Ahmad and R.M. NarayananInverse Scattering Approaches in Through-the-Wall Imaging, K. Sarabandi, M. Thiel, M. Dehmollai

  3. Near-wall behavior of turbulent wall-bounded flows

    Energy Technology Data Exchange (ETDEWEB)

    Buschmann, Matthias H. [Institut fuer Luft- und Kaeltetechnik Dresden, Bertolt-Brecht-Allee 20, 01309 Dresden (Germany)], E-mail: Matthias.Buschmann@ilkdresden.de; Indinger, Thomas [Technische Universitaet Muenchen, Institute of Aerodynamics, Boltzmannstr., 15, 85748 Garching (Germany); Gad-el-Hak, Mohamed [Virginia Commonwealth University, Richmond, VA 23284-3015 (United States)

    2009-10-15

    A data base compiling a large number of results from direct numerical simulations and physical experiments is used to explore the properties of shear and normal Reynolds stresses very close to the wall of turbulent channel/pipe flows and boundary layers. Three types of scaling are mainly investigated, classical inner, standard mixed, and pure outer scaling. The study focuses on the wall behavior, the location and the value of the peak Reynolds shear stress and the three normal stresses. A primary observation is that all of these parameters show a significant Karman number dependence. None of the scalings investigated works in an equal manner for all parameters. It is found that the respective first-order Taylor series expansion satisfactorily represents each stress only in a surprisingly thin layer very close to the wall. In some cases, a newly introduced scaling based on u{sub {tau}}{sup 3/2}u{sub e}{sup 1/2} offers a remedy.

  4. ORIGINAL ARTICLE Sonographic gallbladder wall thickness in ...

    African Journals Online (AJOL)

    gallbladder wall thickness and the subjects' age, sex, height and weight .... sex distributions and mean height and weights were calculated. Results were expressed .... establishing of a population-based US gallbladder wall thickness so that.

  5. Brick Walls on the Brane

    CERN Document Server

    Medved, A J M

    2002-01-01

    The so-called ``brick-wall model'' is a semi-classical approach that has been used to explain black hole entropy in terms of thermal matter fields. Here, we apply the brick-wall formalism to thermal bulk fields in a Randall-Sundrum brane world scenario. In this case, the black hole entity is really a string-like object in the anti-de Sitter bulk, while appearing as a Schwarzchild black hole to observers living on the brane. In spite of these exotic circumstances, we establish that the Bekenstein-Hawking entropy law is preserved. Although a similar calculation was recently considered in the literature, this prior work invoked a simplifying assumption (which we avoid) that can not be adequately justified.

  6. Brick walls on the brane

    Energy Technology Data Exchange (ETDEWEB)

    Medved, A J M [Department of Physics and Theoretical Physics Institute, University of Alberta, Edmonton (Canada)

    2002-01-21

    The so-called 'brick-wall model' is a semiclassical approach that has been used to explain black hole entropy in terms of thermal matter fields. Here, we apply the brick-wall formalism to thermal bulk fields in a Randall-Sundrum brane world scenario. In this case, the black hole entity is really a string-like object in the anti-de Sitter bulk, while appearing as a Schwarzchild black hole to observers living on the brane. In spite of these exotic circumstances, we establish that the Bekenstein-Hawking entropy law is preserved. Although a similar calculation was recently considered in the literature, this prior study invoked a simplifying assumption (which we avoid) that cannot be adequately justified.

  7. Creating universes with thick walls

    CERN Document Server

    Ulvestad, Andrew

    2012-01-01

    We study the dynamics of a spherically symmetric false vacuum bubble embedded in a true vacuum region separated by a "thick wall", which is generated by a scalar field in a quartic potential. We study the "Farhi-Guth-Guven" (FGG) quantum tunneling process by constructing numerical solutions relevant to this process. The ADM mass of the spacetime is calculated, and we show that there is a lower bound that is a significant fraction of the scalar field mass. We argue that the zero mass solutions used to by some to argue against the physicality of the FGG process are artifacts of the thin wall approximation used in earlier work. We argue that the zero mass solutions should not be used to question the viability of the FGG process.

  8. Walled-off pancreatic necrosis

    Institute of Scientific and Technical Information of China (English)

    Michael; Stamatakos; Charikleia; Stefanaki; Konstantinos; Kontzoglou; Spyros; Stergiopoulos; Georgios; Giannopoulos; Michael; Safioleas

    2010-01-01

    Walled-off pancreatic necrosis (WOPN), formerly known as pancreatic abscess is a late complication of acute pancreatitis. It can be lethal, even though it is rare. This critical review provides an overview of the continually expanding knowledge about WOPN, by review of current data from references identified in Medline and PubMed, to September 2009, using key words, such as WOPN, infected pseudocyst, severe pancreatitis, pancreatic abscess, acute necrotizing pancreatitis (ANP), pancreas, inflammation and al...

  9. Droplets Evaporation on Heated Wall

    Directory of Open Access Journals (Sweden)

    Misyura S. Y.

    2015-01-01

    Full Text Available Various modes of evaporation in a wide range of droplet sizes and wall temperatures have been investigated in the present work. For any initial drop size there are three typical boiling regime: 1 the nucleate boiling; 2 the transitional regime; 3 the film boiling. The width of the transition region of boiling crisis increases with increasing the initial volume V0. Evaporation of large droplets at high superheat depends on the initial droplet shape.

  10. Statistical characteristics of simulated walls

    OpenAIRE

    Demianski, M.; Doroshkevich, A. G.; V.; Mueller; Turchaninov, V.

    2000-01-01

    The large scale matter distribution in three different simulations of CDM models is investigated and compared with corresponding results of the Zel'dovich theory of nonlinear gravitational instability. We show that the basic characteristics of wall-like structure elements are well described by this theory, and that they can be expressed by the cosmological parameters and a few spectral moments of the perturbation spectrum. Therefore the characteristics of such elements provide reasonable esti...

  11. Flooding Effect on Earth Walls

    Directory of Open Access Journals (Sweden)

    Meysam Banimahd

    2010-12-01

    Full Text Available Earth building is a sustainable, environmentally friendly and economical method of construction that has been used worldwide for many centuries. For the past three decades, earth has seen a revival as a building material for a modern construction method due to its benefits in terms of low carbon content, low cost and energy involved during construction, as well as the fact that it is a sustainable technology of building. Climate change is influencing precipitation levels and patterns around the world, and as a consequence, flood risk is increasing rapidly. When flooding occurs, earth buildings are exposed to water by submersion, causing an increase in the degree of saturation of the earth structures and therefore a decrease of the suction between particles. This study investigated the effect of cycles of flooding (consecutive events of flooding followed by dry periods on earth walls. A series of characterization tests were carried out to obtain the physical and mechanical properties of the studied earth material. In a second stage, Flooding Simulation Tests (FST were performed to explore the earth walls’ response to repeated flooding events. The results obtained for the tested earth wall/samples with reinforced material (straw reveal hydraulic hysteresis when wall/samples are subject to cycles of wetting and drying.

  12. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  13. Tube wall thickness measurement apparatus

    Science.gov (United States)

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  14. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, Paul R. (Santa Fe, NM)

    1987-01-01

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  15. Thermal insulation properties of walls

    Directory of Open Access Journals (Sweden)

    Zhukov Aleksey Dmitrievich

    2014-05-01

    Full Text Available Heat-protective qualities of building structures are determined by the qualities of the used materials, adequate design solutions and construction and installation work of high quality. This rule refers both to the structures made of materials similar in their structure and nature and mixed, combined by a construction system. The necessity to ecaluate thermal conductivity is important for a product and for a construction. Methods for evaluating the thermal protection of walls are based on the methods of calculation, on full-scale tests in a laboratory or on objects. At the same time there is a reason to believe that even deep and detailed calculation may cause deviation of the values from real data. Using finite difference method can improve accuracy of the results, but it doesn’t solve all problems. The article discusses new approaches to evaluating thermal insulation properties of walls. The authors propose technique of accurate measurement of thermal insulation properties in single blocks and fragments of walls and structures.

  16. The cell wall of Fusarium oxysporum

    NARCIS (Netherlands)

    Schoffelmeer, EAM; Klis, FM; Sietsma, JH; Cornelissen, BJC

    1999-01-01

    Sugar analysis of isolated cell walls from three formae speciales of Fusarium oxysporum showed that they contained not only glucose and (N-acetyl)-glucosamine, but also mannose, galactose, and uronic acids, presumably originating from cell wall glycoproteins. Cell wall glycoproteins accounted for

  17. The cell wall of Fusarium oxysporum

    NARCIS (Netherlands)

    Schoffelmeer, EAM; Klis, FM; Sietsma, JH; Cornelissen, BJC

    1999-01-01

    Sugar analysis of isolated cell walls from three formae speciales of Fusarium oxysporum showed that they contained not only glucose and (N-acetyl)-glucosamine, but also mannose, galactose, and uronic acids, presumably originating from cell wall glycoproteins. Cell wall glycoproteins accounted for 50

  18. To detect anomalies in diaphragm walls

    NARCIS (Netherlands)

    Spruit, R.

    2015-01-01

    Diaphragm walls are potentially ideal retaining walls for deep excavations in densely built-up areas, as they cause no vibrations during their construction and provide structural elements with high strength and stiffness. In the recent past, however, several projects using diaphragm walls as soil an

  19. Static domain wall in braneworld gravity

    Energy Technology Data Exchange (ETDEWEB)

    Abdalla, M.C.B.; Carlesso, P.F. [UNESP, Universidade Estadual Paulista, Instituto de Fisica Teiorica, Rua Dr. Bento Teobaldo Ferraz 271, Bloco II, Barra-Funda, Caixa Postal 70532-2, Sao Paulo, SP (Brazil); Hoff da Silva, J.M. [UNESP, Universidade Estadual Paulista, Departamento de Fisica e Quimica, Guaratingueta, SP (Brazil)

    2014-01-15

    In this paper we consider a static domain wall inside a 3-brane. Different from the standard achievement obtained in General Relativity, the analysis performed here gives a consistency condition for the existence of static domain walls in a braneworld gravitational scenario. Also the behavior of the domain wall's gravitational field in the newtonian limit is shown. (orig.)

  20. Methods & Strategies: Put Your Walls to Work

    Science.gov (United States)

    Jackson, Julie; Durham, Annie

    2016-01-01

    This column provides ideas and techniques to enhance your science teaching. This month's issue discusses planning and using interactive word walls to support science and reading instruction. Many classrooms have word walls displaying vocabulary that students have learned in class. Word walls serve as visual scaffolds to support instruction. To…

  1. Steel Sheet Pile Walls in Soft Soil

    NARCIS (Netherlands)

    Kort, D.A.

    2002-01-01

    For almost a century, steel sheet pile walls are applied worldwide as earth retaining structures for excavations and quay walls. Within the framework of the development of European structural codes for Civil Engineering works, the Eurocodes, Eurocode 3 Part 5 for design of steel sheet pile walls was

  2. Thin Wall Austempered Ductile Iron (TWADI)

    OpenAIRE

    M. Górny; E. Fraś

    2009-01-01

    In this paper the analysis of thin walled castings made of ductile iron is considered. It is shown that thin wall austempered ductile iron can be obtained by means of short-term heat treatment of thin wall castings without addition of alloying elements. Metallographic examinations of 2 mm thin walled castings along with casting with thicker wall thickness (20x28 mm) after different austempring conditions are presented. It has been proved that short-term heat treatment amounted 20 minutes of a...

  3. Seismic displacement of gravity retaining walls

    Directory of Open Access Journals (Sweden)

    Kamal Mohamed Hafez Ismail Ibrahim

    2015-08-01

    Full Text Available Seismic displacement of gravity walls had been studied using conventional static methods for controlled displacement design. In this study plain strain numerical analysis is performed using Plaxis dynamic program where prescribed displacement is applied at the bottom boundary of the soil to simulate the applied seismic load. Constrained absorbent side boundaries are introduced to prevent any wave reflection. The studied soil is chosen dense granular sand and modeled as elasto-plastic material according to Mohr–Column criteria while the gravity wall is assumed elastic. By comparing the resulted seismic wall displacements calculated by numerical analysis for six historical ground motions with that calculated by the pseudo-static method, it is found that numerical seismic displacements are either equal to or greater than corresponding pseudo-static values. Permissible seismic wall displacement calculated by AASHTO can be used for empirical estimation of seismic displacement. It is also found that seismic wall displacement is directly proportional with the positive angle of inclination of the back surface of the wall, soil flexibility and with the earthquake maximum ground acceleration. Seismic wall sliding is dominant and rotation is negligible for rigid walls when the ratio between the wall height and the foundation width is less than 1.4, while for greater ratios the wall becomes more flexible and rotation (rocking increases till the ratio reaches 1.8 where overturning is susceptible to take place. Cumulative seismic wall rotation increases with dynamic time and tends to be constant at the end of earthquake.

  4. Mechanism of bubble detachment from vibrating walls

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dongjun; Park, Jun Kwon, E-mail: junkeun@postech.ac.kr; Kang, Kwan Hyoung [Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), San 31, Hyoja-dong, Pohang 790-784 (Korea, Republic of); Kang, In Seok [Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), San 31, Hyoja-dong, Pohang 790-784 (Korea, Republic of)

    2013-11-15

    We discovered a previously unobserved mechanism by which air bubbles detach from vibrating walls in glasses containing water. Chaotic oscillation and subsequent water jets appeared when a wall vibrated at greater than a critical level. Wave forms were developed at water-air interface of the bubble by the wall vibration, and water jets were formed when sufficiently grown wave-curvatures were collapsing. Droplets were pinched off from the tip of jets and fell to the surface of the glass. When the solid-air interface at the bubble-wall attachment point was completely covered with water, the bubble detached from the wall. The water jets were mainly generated by subharmonic waves and were generated most vigorously when the wall vibrated at the volume resonant frequency of the bubble. Bubbles of specific size can be removed by adjusting the frequency of the wall's vibration.

  5. Pulmonary complications of abdominal wall defects.

    Science.gov (United States)

    Panitch, Howard B

    2015-01-01

    The abdominal wall is an integral component of the chest wall. Defects in the ventral abdominal wall alter respiratory mechanics and can impair diaphragm function. Congenital abdominal wall defects also are associated with abnormalities in lung growth and development that lead to pulmonary hypoplasia, pulmonary hypertension, and alterations in thoracic cage formation. Although infants with ventral abdominal wall defects can experience life-threatening pulmonary complications, older children typically experience a more benign respiratory course. Studies of lung and chest wall function in older children and adolescents with congenital abdominal wall defects are few; such investigations could provide strategies for improved respiratory performance, avoidance of respiratory morbidity, and enhanced exercise ability for these children.

  6. POROUS WALL, HOLLOW GLASS MICROSPHERES

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, W.

    2012-06-30

    Hollow Glass Microspheres (HGM) is not a new technology. All one has to do is go to the internet and Google{trademark} HGM. Anyone can buy HGM and they have a wide variety of uses. HGM are usually between 1 to 100 microns in diameter, although their size can range from 100 nanometers to 5 millimeters in diameter. HGM are used as lightweight filler in composite materials such as syntactic foam and lightweight concrete. In 1968 a patent was issued to W. Beck of the 3M{trademark} Company for 'Glass Bubbles Prepared by Reheating Solid Glass Particles'. In 1983 P. Howell was issued a patent for 'Glass Bubbles of Increased Collapse Strength' and in 1988 H. Marshall was issued a patent for 'Glass Microbubbles'. Now Google{trademark}, Porous Wall, Hollow Glass Microspheres (PW-HGMs), the key words here are Porous Wall. Almost every article has its beginning with the research done at the Savannah River National Laboratory (SRNL). The Savannah River Site (SRS) where SRNL is located has a long and successful history of working with hydrogen and its isotopes for national security, energy, waste management and environmental remediation applications. This includes more than 30 years of experience developing, processing, and implementing special ceramics, including glasses for a variety of Department of Energy (DOE) missions. In the case of glasses, SRS and SRNL have been involved in both the science and engineering of vitreous or glass based systems. As a part of this glass experience and expertise, SRNL has developed a number of niches in the glass arena, one of which is the development of porous glass systems for a variety of applications. These porous glass systems include sol gel glasses, which include both xerogels and aerogels, as well as phase separated glass compositions, that can be subsequently treated to produce another unique type of porosity within the glass forms. The porous glasses can increase the surface area compared to &apos

  7. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, P.R.

    1987-01-06

    An apparatus is described for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item, the apparatus comprising: a. a base; b. a first support member having first and second ends, the first end being connected to the base, the first support member having a sufficiently small circumference that the tube can be slid over the first support member; c. a spherical element, the spherical element being connected to the second end of the first support member. The spherical element has a sufficiently small circumference at its equator that the tube can be slid over the spherical element, the spherical element having at its equator a larger circumference than the first support member; d. a second support member having first and second ends, the first end being connected to the base, the second support member being spaced apart form the first support member; e. a positioning element connected to and moveable relative to the second support member; and f. an indicator connected to the positioning element and being moveable thereby to a location proximate the spherical element. The indicator includes a contact ball for contacting the selected standard item and holding it against the spherical element, the contact ball contacting the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item, the rotatable needle being operatively connected to and responsive to the position of the contact ball.

  8. Water Walls for Life Support

    Science.gov (United States)

    Flynn, Michael T. (Inventor); Gormly, Sherwin J. (Inventor); Hammoudeh, Mona (Inventor); Richardson, Tra-My Justine (Inventor)

    2017-01-01

    A method and associated system for processing waste gases, liquids and solids, produced by human activity, to separate (i) liquids suitable for processing to produce potable water, (ii) solids and liquids suitable for construction of walls suitable for enclosing a habitat volume and for radiation shielding, and (iii) other fluids and solids that are not suitable for processing. A forward osmosis process and a reverse osmosis process are sequentially combined to reduce fouling and to permit accumulation of different processable substances. The invention may be used for long term life support of human activity.

  9. Explosive Fragmentation of Dividing Walls

    Science.gov (United States)

    1981-07-01

    bloc~ks and the complexity of the molds that would have to be built, it was de- cided to use full-scale masonry blocks. The walls fabricated were 163...Z .y ,. ,- ;. -.. "COMBINED DISTRIBUTION FOR TESI SERIES 3W I o3 10 ’ I • I ’ ii i’i’I l’l ’ I ’-I"* I *1" PiiPl’ ’ 1 ’l i l• iT -7,62 cm Rs

  10. First Wall and Operational Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Lasnier, C; Allen, S; Boedo, J; Groth, M; Brooks, N; McLean, A; LaBombard, B; Sharpe, J; Skinner, C; Whyte, D; Rudakov, D; West, W; Wong, C

    2006-06-19

    In this chapter we review numerous diagnostics capable of measurements at or near the first wall, many of which contribute information useful for safe operation of a tokamak. There are sections discussing infrared cameras, visible and VUV cameras, pressure gauges and RGAs, Langmuir probes, thermocouples, and erosion and deposition measurements by insertable probes and quartz microbalance. Also discussed are dust measurements by electrostatic detectors, laser scattering, visible and IR cameras, and manual collection of samples after machine opening. In each case the diagnostic is discussed with a view toward application to a burning plasma machine such as ITER.

  11. Witten Index and Wall Crossing

    CERN Document Server

    Hori, Kentaro; Yi, Piljin

    2014-01-01

    We compute the Witten index of one-dimensional gauged linear sigma models with at least ${\\mathcal N}=2$ supersymmetry. In the phase where the gauge group is broken to a finite group, the index is expressed as a certain residue integral. It is subject to a change as the Fayet-Iliopoulos parameter is varied through the phase boundaries. The wall crossing formula is expressed as an integral at infinity of the Coulomb branch. The result is applied to many examples, including quiver quantum mechanics that is relevant for BPS states in $d=4$ ${\\mathcal N}=2$ theories.

  12. Fire behaviour of tabique walls

    OpenAIRE

    Araújo, Alexandre; Fonseca, E.M.M.; Ferreira, Débora; P. A. G. Piloto; Pinto,Jorge

    2015-01-01

    The tabique is one of the main Portuguese traditional building techniques, which is based on raw materials as earth and wood. In general, a tabique wall is formed by a simple timber structure covered by an earth-based material. Earth has an important role in this system because it protects the internal timber structure along with its finishing function. The Trás-os-Montes e Alto Douro is the northeast region of Portugal and it is very rich in terms of tabique construction heritage. Nowadays, ...

  13. Spontaneous Behaviors and Wall-Curvature Lead to Apparent Wall Preference in Planarian.

    Directory of Open Access Journals (Sweden)

    Yoshitaro Akiyama

    Full Text Available The planarian Dugesia japonica tends to stay near the walls of its breeding containers and experimental dishes in the laboratory, a phenomenon called "wall preference". This behavior is thought to be important for environmental adaptation, such as hiding by planarians in nature. However, the mechanisms regulating wall-preference behavior are not well understood, since this behavior occurs in the absence of any particular stimulation. Here we show the mechanisms of wall-preference behavior. Surprisingly, planarian wall-preference behavior was also shown even by the head alone and by headless planarians. These results indicate that planarian "wall-preference" behavior only appears to be a "preference" behavior, and is actually an outcome of spontaneous behaviors, rather than of brain function. We found that in the absence of environmental cues planarians moved basically straight ahead until they reached a wall, and that after reaching a wall, they changed their direction of movement to one tangential to the wall, suggesting that this spontaneous behavior may play a critical role in the wall preference. When we tested another spontaneous behavior, the wigwag movement of the planarian head, using computer simulation with various wigwag angles and wigwag intervals, large wigwag angle and short wigwag interval reduced wall-preference behavior. This indicated that wigwag movement may determine the probability of staying near the wall or leaving the wall. Furthermore, in accord with this simulation, when we tested planarian wall-preference behavior using several assay fields with different curvature of the wall, we found that concavity and sharp curvature of walls negatively impacted wall preference by affecting the permissible angle of the wigwag movement. Together, these results indicate that planarian wall preference may be involuntarily caused by the combination of two spontaneous planarian behaviors: moving straight ahead until reaching a wall and

  14. Anterior chest wall examination reviewed

    Directory of Open Access Journals (Sweden)

    F. Trotta

    2011-09-01

    Full Text Available Anterior chest wall involvement is not infrequently observed within inflammatory arthropaties, particularly if one considers seronegative spondiloarthritides and SAPHO syndrome. Physical examination is unreliable and conventional X-rays analysis is an unsatisfactory tool during diagnostic work-up of this region. Scintigraphic techniques yield informations both on the activity and on the anatomical extent of the disease while computerized tomography visualize the elementary lesions, such as erosions, which characterize the process. Moreover, when available, magnetic resonance imaging couple the ability to finely visualize such lesions with the possibility to show early alterations and to characterize the “activity” of the disease, presenting itself as a powerful tool both for diagnosis and follow-up. This review briefly shows the applications of imaging techniques for the evaluation of the anterior chest wall focusing on what has been done in the SAPHO syndrome which can be considered prototypical for this regional involvement since it is the osteo-articular target mainly affected by the disease.

  15. Evaluating rammed earth walls: a case study

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P. [Deakin University, Geelong (Australia). Built Environment Research Group; La Trobe University, Wodonga (Australia); Luther, M.B. [Deakin University, Geelong (Australia). Built Environment Research Group

    2004-03-01

    The following research has been undertaken as a response to the recent controversy regarding the suitability of rammed earth wall construction as an effective building envelope in regard to its thermal performance. The R-value for rammed earth walls is low hence they might be expected to conduct heat into a building during summer. However the large mass of these walls and the associated thermal lag in heat transfer from outside to inside may result in the walls performing satisfactorily in a building which is only occupied during working hours. Internal rammed earth walls may act as moderators of large diurnal temperature swings helping to produce an even comfortable temperature within a building. Empirical (in situ) measurements of temperature and heat flux were taken on the walls of an existing rammed earth office building in New South Wales, Australia during the summer. An analysis was performed which established a methodology to measure the heat flow associated with the walls, floor, ceiling, windows and infiltration for one office during occupied hours and the net energy transferred between the office and these elements was established. During this time the earth walls performed well. External walls were found to transmit comparatively little heat to the office and the internal walls absorbed heat during this time. Diffuse sky radiation transmitted by the window and infiltration are both likely to be important factors in the summer heat load. (author)

  16. Immersion Refractometry of Isolated Bacterial Cell Walls

    Science.gov (United States)

    Marquis, Robert E.

    1973-01-01

    Immersion-refractometric and light-scattering measurements were adapted to determinations of average refractive indices and physical compactness of isolated bacterial cell walls. The structures were immersed in solutions containing various concentrations of polymer molecules that cannot penetrate into wall pores, and then an estimate was made of the polymer concentration or the refractive index of the polymer solution in which light scattering was reduced to zero. Because each wall preparation was heterogeneous, the refractive index of the medium for zero light scattering had to be estimated by extrapolation. Refractive indices for walls suspended in bovine serum albumin solutions ranged from 1.348 for walls of the rod form of Arthrobacter crystallopoietes to 1.382 for walls of the teichoic acid deficient, 52A5 strain of Staphylococcus aureus. These indices were used to calculate approximate values for solids content per milliliter, and the calculated values agreed closely with those estimated from a knowledge of dextran-impermeable volumes per gram, dry weight, of the walls. When large molecules such as dextrans or serum albumin were used for immersion refractometry, the refractive indices obtained were for entire walls, including both wall polymers and wall water. When smaller molecules that can penetrate wall pores to various extents were used with Micrococcus lysodeikticus walls, the average, apparent refractive index of the structures increased as the molecular size of probing molecules was decreased. It was possible to obtain an estimate of 1.45 to 1.46 for the refractive index of wall polymers, predominantly peptidoglycans in this case, by extrapolating the curve for refractive index versus molecular radius to a value of 0.2 nm, the approximate radius of a water molecule. This relatively low value for polymer refractive index was interpreted as evidence in favor of the amorphous, elastic model of peptidoglycan structure and against the crystalline, rigid

  17. The State of the GeoWall

    Science.gov (United States)

    Morin, P. J.; Leigh, J.; van Keken, P.; Johnson, A.

    2003-12-01

    The GeoWall stereo projection technology has been widely adopted within Earth Science. Over 20,000 undergraduate students per year use a GeoWall in classroom and lab settings at over 80 institutions around the world using over 200 GeoWalls. We believe that critical mass for this technology has been reached in the Earth Science. Many collaborations have been initiated. With Iris, GeoWall is exploring new ways to monitor seismic networks in real-time and to visualize extremely large, whole Earth seismic simulations. We are also working with a number of drilling organizations including JOI, DOSECC and LacCore to bring modern visualization technology to core interpretation and drill site selection. Also, over 15 museums now have or are building GeoWalls for informal education. Much of the science that is being performed on the GeoWall is finding its way directly into the classroom and science museum. One of the success stories has been the GeoWall Consortium's interaction with industry. The basic hardware for the GeoWall has been spun off to companies that now sell variations of the hardware. In addition, many software companies including ESRI and Dynamic Graphics have added support for the GeoWall in their products. The future of GeoWall is four fold. Curriculum development will bring more material to all GeoWall users. Assessment of the curriculum and educational psychology will give us GeoWall best practices. In technology development, the GeoWall 2 is a 20+ million pixel, tiled display which brings more resolution to the Earth Sciences than ever. To support research the consortium is developing a volume rendering application to visualize extremely large datasets.

  18. Near wall flow parameters in the blade end-wall corner region

    Science.gov (United States)

    Bhargava, R. K.; Raj, R.

    The effects of secondary end-wall corner flows on near wall flow parameters in turbomachinary are studied. Important near wall flow parameters such as the wall shear stress vector, the mean wall pressure, the wall pressure fluctuations, and the correlation of the wall pressure fluctuation with the velocity fluctuation in three-dimensional turbulent flows are first experimentally investigated. The blade end-wall corner region is simulated by mounting airfoil section of symmetric blades on both sides of the flat plate with semicircular leading edge. Observed changes in the maximum values of the wall shear stress and its location from the corner line could be associated with the streching and attenuation of the horseshoe vortex. The values of wall pressure fluctuation intensity in the blade end-wall corner region are found to be influenced by the changes of the strength of the horseshoe vortex. The correlation of the wall pressure fluctuation with the velocity fluctuation indicated higher values of correlation coefficient in the inner region as compared to the outer region of the shear layer. The values of wall pressure-velocity correlation coefficient in the blade end-wall corner region also decrease in the streamwise direction while increasing in the presence of favorable and adverse pressure gradients.

  19. Cell Wall Assembly in Fucus Zygotes

    Science.gov (United States)

    Quatrano, Ralph S.; Stevens, Patricia T.

    1976-01-01

    Fertilization triggers the assembly of a cell wall around the egg cell of three brown algae, Fucus vesiculosus, F. distichus, and F. inflatus. New polysaccharide polymers are continually being added to the cell wall during the first 24 hours of synchronous embryo development. This wall assembly involves the extracellular deposition of fibrillar material by cytoplasmic vesicles fusing with the plasma membrane. One hour after fertilization a fragmented wall can be isolated free of cytoplasm and contains equal amounts of cellulose and alginic acid with no fucose-containing polymers (fucans) present. Birefringence of the wall caused by oriented cellulose microfibrils is not detected in all zygotes until 4 hours, at which time intact cell walls can be isolated that retain the shape of the zygote. These walls have a relatively low ratio of fucose to xylose and little sulfate when compared to walls from older embryos. When extracts of walls from 4-hour zygotes are subjected to cellulose acetate electrophoresis at pH 7, a single fucan (F1) can be detected. By 12 hours, purified cell walls are composed of fucans containing a relatively high ratio of fucose to xylose and high levels of sulfate, and contain a second fucan (F2) which is electrophoretically distinct from F1. F2 appears to be deposited in only a localized region of the wall, that which elongates to form the rhizoid cell. Throughout wall assembly, the polyuronide block co-polymer alginic acid did not significantly vary its mannuronic (M) to guluronic (G) acid ratio (0.33-0.55) or its block distribution (MG, 54%; GG, 30%; MM, 16%). From 6 to 24 hours of embryo development, the proportion of the major polysaccharide components found in purified walls is stable. Alginic acid is the major polymer and comprises about 60% of the total wall, while cellulose and the fucans each make-up about 20% of the remainder. During the extracellular assembly of this wall, the intracellular levels of the storage glucan laminaran

  20. Advancements in subsurface barrier wall technology

    Energy Technology Data Exchange (ETDEWEB)

    Mutch, R.D. Jr.; Ash, R.E. IV; Caputi, J.R. [Eckenfelder Inc., Mahwah, NJ (United States)

    1995-12-31

    Subsurface barrier walls have been an important component of site remediation efforts for nearly thirty years. However, until the last decade, limited design options were available for barrier wall construction. Most barrier walls were constructed using traditional technologies such as soil-bentonite slurry trench and, in some instances, conventional compacted clay. While other technologies certainly existed, such as vibrating beam and sheet pile walls, they represented a minor share of the remediation market. Today the remediation engineer considering a subsurface barrier wall-based remediation is confronted with a baffling array, of new technologies and permutations of these technologies. Moreover, new technologies are entering the marketplace seemingly on a monthly basis. A partial listing of available barrier wall technologies is presented.

  1. Shape dynamics of growing cell walls

    CERN Document Server

    Banerjee, Shiladitya; Dinner, Aaron R

    2015-01-01

    We introduce a general theoretical framework to study the shape dynamics of actively growing and remodeling surfaces. Using this framework we develop a physical model for growing bacterial cell walls and study the interplay of cell shape with the dynamics of growth and constriction. The model allows us to derive constraints on cell wall mechanical energy based on the observed dynamics of cell shape. We predict that exponential growth in cell size requires a constant amount of cell wall energy to be dissipated per unit volume. We use the model to understand and contrast growth in bacteria with different shapes such as spherical, ellipsoidal, cylindrical and toroidal morphologies. Coupling growth to cell wall constriction, we predict a discontinuous shape transformation, from partial constriction to cell division, as a function of the chemical potential driving cell-wall synthesis. Our model for cell wall energy and shape dynamics relates growth kinetics with cell geometry, and provides a unified framework to d...

  2. Hydrodynamics of ultra-relativistic bubble walls

    Directory of Open Access Journals (Sweden)

    Leonardo Leitao

    2016-04-01

    Full Text Available In cosmological first-order phase transitions, gravitational waves are generated by the collisions of bubble walls and by the bulk motions caused in the fluid. A sizeable signal may result from fast-moving walls. In this work we study the hydrodynamics associated to the fastest propagation modes, namely, ultra-relativistic detonations and runaway solutions. We compute the energy injected by the phase transition into the fluid and the energy which accumulates in the bubble walls. We provide analytic approximations and fits as functions of the net force acting on the wall, which can be readily evaluated for specific models. We also study the back-reaction of hydrodynamics on the wall motion, and we discuss the extrapolation of the friction force away from the ultra-relativistic limit. We use these results to estimate the gravitational wave signal from detonations and runaway walls.

  3. Motional Effect on Wall Shear Stresses

    DEFF Research Database (Denmark)

    Kock, Samuel Alberg; Torben Fründ, Ernst; Yong Kim, Won

    Atherosclerosis is the leading cause of death and severe disability. Wall Shear Stress (WSS), the stress exerted on vessel walls by the flowing blood is a key factor in the development of atherosclerosis. Computational Fluid Dynamics (CFD) is widely used for WSS estimations. Most CFD simulations...... are based on static models to ease computational burden leading to inaccurate estimations. The aim of this work was to estimate the effect of vessel wall deformations (expansion and bending) on WSS levels....

  4. Transport and coherent structures in wall turbulence

    CERN Document Server

    Tardu, Sedat

    2014-01-01

    Wall bounded turbulent flows are of major importance in industrial and environmental fluid mechanics. The structure of the wall turbulence is intrinsically related to the coherent structures that play a fundamental role in the transport process. The comprehension of their regeneration mechanism is indispensable for the development of efficient strategies in terms of drag control and near wall turbulence management. This book provides an up-to-date overview on the progress made in this specific area in recent years.

  5. Electron-wall Interaction in Hall Thrusters

    Energy Technology Data Exchange (ETDEWEB)

    Y. Raitses; D. Staack; M. Keidar; N.J. Fisch

    2005-02-11

    Electron-wall interaction effects in Hall thrusters are studied through measurements of the plasma response to variations of the thruster channel width and the discharge voltage. The discharge voltage threshold is shown to separate two thruster regimes. Below this threshold, the electron energy gain is constant in the acceleration region and therefore, secondary electron emission (SEE) from the channel walls is insufficient to enhance electron energy losses at the channel walls. Above this voltage threshold, the maximum electron temperature saturates.

  6. Experimental investigations on dry stone masonry walls

    OpenAIRE

    2006-01-01

    Brick unreinforced masonry walls have been widely studied both from experimental and numerical point of view, but scarce experimental information is available for dry stone masonry walls that constitute the material more frequently used in the construction of ancient historical constructions. Therefore, the present work aims at increasing the insight about the behavior of typical ancient masonry walls under cyclic loading. To attain such goal, different experimental approaches are consi...

  7. Rectangular Blocks vs Polygonal Walls in Archaeoseismology

    Directory of Open Access Journals (Sweden)

    Klaus-G. Hinzen

    2017-07-01

    Full Text Available Collapsed or deformed walls in ancient structures constitute important evidence in archaeoseismology, where damage is interpreted in terms of earthquake ground motion. A large variety of wall types have been developed during the millennia in different cultural backgrounds. Often walls with polygonal-shaped building blocks are regarded as more earthquake-resistant than a wall consisting of rectangular elements and, as is sometimes speculated, that the irregular wall types were intentionally developed for that purpose. We use simply structured discrete element models of four walls with different block geometries, perfect rectangular, an Inka-type structure and two polygonal designs, to test their dynamic behavior. In addition to an analytic calculation of ground motion, we use measured strong motion signals as boundary conditions for the 3D wall models with varying height to width ratios. At peak ground accelerations between 1.0 and 9.0 m/s2 and major frequencies of 0.5 to 3 Hz, numeric experiments with the horizontally applied analytic ground motions result in clear differences in the resistance of the four wall types with the rectangular block wall being most vulnerable. For more complex measured 3D motions the Inka-type wall proves more stable than the rectangular block wall; however, height to width ratio still has equally strong influence on the stability. Internal deformation of non-collapsed walls shows some correlation with the parameters of the driving motion. For simple impulsive ground motions, a peak ground displacement threshold exists between toppling and remaining upright for all four models but peak acceleration cannot be reliably back calculated.

  8. Recovery after abdominal wall reconstruction

    DEFF Research Database (Denmark)

    Jensen, Kristian Kiim

    2017-01-01

    was lacking. Study II was a case-control study of the effects of an enhanced recovery after surgery pathway for patients undergoing abdominal wall reconstruction for a giant hernia. Sixteen consecutive patients were included prospectively after the implementation of a new enhanced recovery after surgery...... pathway at the Digestive Disease Center, Bispebjerg Hospital, and compared to a control group of 16 patients included retrospectively in the period immediately prior to the implementation of the pathway. The enhanced recovery after surgery pathway included preoperative high-dose steroid, daily assessment...... of revised discharge criteria and an aggressive approach to restore bowel function (chewing gum and enema on postoperative day two). Patients who followed the enhanced recovery after surgery pathway reported low scores of pain, nausea and fatigue, and were discharged significantly faster than patients...

  9. Four ways across the wall

    CERN Document Server

    Pioline, Boris

    2011-01-01

    An important question in the study of N=2 supersymmetric string or field theories is to compute the jump of the BPS spectrum across walls of marginal stability in the space of parameters or vacua. I survey four apparently different answers for this problem, two of which are based on the mathematics of generalized Donaldson-Thomas invariants (the Kontsevich-Soibelman and the Joyce-Song formulae), while the other two are based on the physics of multi-centered black hole solutions (the Coulomb branch and the Higgs branch formulae, discovered in joint work with J. Manschot and A. Sen). Explicit computations indicate that these formulae are equivalent, though a combinatorial proof is currently lacking.

  10. Creating universes with thick walls

    Science.gov (United States)

    Ulvestad, Andrew; Albrecht, Andreas

    2012-05-01

    We study the dynamics of a spherically symmetric false vacuum bubble embedded in a true vacuum region separated by a “thick wall”, which is generated by a scalar field in a quartic potential. We study the “Farhi-Guth-Guven” (FGG) quantum tunneling process by constructing numerical solutions relevant to this process. The Arnowitt-Deser-Misner mass of the spacetime is calculated, and we show that there is a lower bound that is a significant fraction of the scalar field mass. We argue that the zero mass solutions used to by some to argue against the physicality of the FGG process are artifacts of the thin wall approximation used in earlier work. We argue that the zero mass solutions should not be used to question the viability of the FGG process.

  11. Virtual gap dielectric wall accelerator

    Science.gov (United States)

    Caporaso, George James; Chen, Yu-Jiuan; Nelson, Scott; Sullivan, Jim; Hawkins, Steven A

    2013-11-05

    A virtual, moving accelerating gap is formed along an insulating tube in a dielectric wall accelerator (DWA) by locally controlling the conductivity of the tube. Localized voltage concentration is thus achieved by sequential activation of a variable resistive tube or stalk down the axis of an inductive voltage adder, producing a "virtual" traveling wave along the tube. The tube conductivity can be controlled at a desired location, which can be moved at a desired rate, by light illumination, or by photoconductive switches, or by other means. As a result, an impressed voltage along the tube appears predominantly over a local region, the virtual gap. By making the length of the tube large in comparison to the virtual gap length, the effective gain of the accelerator can be made very large.

  12. ON WALL SHEAR STRESS OF ARTERY

    Institute of Scientific and Technical Information of China (English)

    Liu Zhao-rong; Liu Bao-yu; Qin Kai-rong

    2003-01-01

    In this paper, a method was proposed that the wall shear stress of artery could be determined by measuring the centerline axial velocity and radial motion of arterial wall simultaneously.The method is simple in application and can get higher precision when it is used to determine the shear stress of arterial wall in vivo.As an example, the shear stress distribution in periodic oscillatory flow of human carotid was calculated and discussed.The computed results show that the shear stress distribution at any given instant is almost uniform and will be zero at the centerline and tends to maximum at the vessel wall.

  13. Great attractor really a great wall

    Energy Technology Data Exchange (ETDEWEB)

    Stebbins, A.; Turner, M.S.

    1988-11-01

    Some of the cosmological consequences are discussed of a late time phase transition which produces light domain walls. The observed peculiar velocity field of the Universe and the observed isotropy of the microwave background radiation severely constrain the wall surface density in such a scenario. The most interesting consequence of such a phase transition is the possibility that the local, coherent streaming motion reported by the Seven Samurai could be explained by the repulsive effect of a relic domain wall with the Hubble volume (the Great Wall).

  14. Scaling analysis on filtered near wall turbulence

    Science.gov (United States)

    Mohan, Prakash; Moser, Robert

    2016-11-01

    Large Eddy Simulations (LES) directly represent larger scale turbulent motions and model the effects of small scale motions. However in the near wall region the large dynamically important eddies scale in viscous wall units, which makes resolving them in a high Reynolds number LES very expensive. This motivates the use of wall-modeled LES, in which these near-wall eddies are modeled. To aid in the development of new wall models, we pursue an asymptotic analysis of the filtered Navier-Stokes equations, in the limit in which the horizontal filter scale is large compared to the thickness of the wall layer. It will be shown that in this limit the filtered velocities u and subgrid stresses τ in the near-wall layer are determined to zeroth order by filtered velocities at the boundary of the wall layer. Further the asymptotics suggest that there is a scaled universal velocity profile f and subgrid stress profile g in the near-wall region. The validity of this result will be tested and the profiles f and g will be evaluated through analysis of DNS data from channel flow at Reτ = 5200 .

  15. Determination of arterial wall shear stress

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The arteries can remodel their structure and function to adapt themselves to the mechanical environment. In various factors that lead to vascular remodeling, the shear stress on the arterial wall induced by the blood flow is of great importance. However, there are many technique difficulties in measuring the wall shear stress directly at present. In this paper, through analyzing the pulsatile blood flow in arteries, a method has been proposed that can determine the wall shear stress quantitatively by measuring the velocity on the arterial axis, and that provides a necessary means to discuss the influence of arterial wall shear stress on vascular remodeling.

  16. Statistical analysis of silo wall pressures

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Berntsen, Kasper Nikolaj

    1998-01-01

    Previously published silo wall pressure measurements during plug flow of barley in alarge concrete silo are re-analysed under the hypothesis that the wall pressures are gamma-distributed.The fits of the gamma distribution type to the local pressure data from each measuring cell are satisfactory.......However, the estimated parameters of the gamma distributions turn out to be significantly inhomogeneous overthe silo wall surface. This inhomogeneity is attributed to the geometrical imperfections of the silo wall.Motivated by the engineering importance of the problem a mathematical model for constructing astochastic...

  17. Relevant surgical anatomy of the chest wall.

    Science.gov (United States)

    Naidu, Babu V; Rajesh, Pala B

    2010-11-01

    The chest wall, like other regional anatomy, is a remarkable fusion of form and function. Principal functions are the protection of internal viscera and an expandable cylinder facilitating variable gas flow into the lungs. Knowledge of the anatomy of the whole cylinder (ribs, sternum, vertebra, diaphragm, intercostal spaces, and extrathoracic muscles) is therefore not only important in the local environment of a specific chest wall resection but also in its relation to overall function. An understanding of chest wall kinematics might help define the loss of function after resection and the effects of various chest wall substitutes. Therefore, this article is not an exhaustive anatomic description but a focused summary and discussion.

  18. Fillability of Thin-Wall Steel Castings

    Energy Technology Data Exchange (ETDEWEB)

    Robert C. Voigt; Joseph Bertoletti; Andrew Kaley; Sandi Ricotta; Travis Sunday

    2002-07-30

    The use of steel components is being challenged by lighter nonferrous or cast iron components. The development of techniques for enhancing and ensuring the filability of thin-wall mold cavities is most critical for thinner wall cast steel production. The purpose of this research was to develop thin-wall casting techniques that can be used to reliably produce thin-wall castings from traditional gravity poured sand casting processes. The focus of the research was to enhance the filling behavior to prevent misrunds. Experiments were conducted to investigate the influence of various foundry variables on the filling of thin section steel castings. These variables include casting design, heat transfer, gating design, and metal fluidity. Wall thickness and pouring temperature have the greatest effect on casting fill. As wall thickness increases the volume to surface area of the casting increases, which increases the solidification time, allowing the metal to flow further in thicker sect ions. Pouring time is another significant variable affecting casting fill. Increases or decreases of 20% in the pouring time were found to have a significant effect on the filling of thin-wall production castings. Gating variables, including venting, pouring head height, and mold tilting also significantly affected thin-wall casting fill. Filters offer less turbulent, steadier flow, which is appropriate for thicker castings, but they do not enhance thin-wall casting fill.

  19. Skyrmions from Instantons inside Domain Walls

    CERN Document Server

    Eto, M; Ohashi, K; Tong, D; Eto, Minoru; Nitta, Muneto; Ohashi, Keisuke; Tong, David

    2005-01-01

    Some years ago, Atiyah and Manton described a method to construct approximate Skyrmion solutions from Yang-Mills instantons. Here we present a dynamical realization of this construction using domain walls in a five-dimensional gauge theory. The non-abelian gauge symmetry is broken in each vacuum but restored in the core of the domain wall, allowing instantons to nestle inside the wall. We show that the worldvolume dynamics of the wall is given by the Skyrme model, including the four-derivative term, and the instantons appear as Skyrmions.

  20. Microanalysis of Plant Cell Wall Polysaccharides

    Institute of Scientific and Technical Information of China (English)

    Nicolai Obel; Veronika Erben; Tatjana Schwarz; Stefan Kühne; Andrea Fodor; Markus Pauly

    2009-01-01

    Oligosaccharide Mass Profiling (OLIMP) allows a fast and sensitive assessment of cell wall polymer structure when coupled with Matrix Assisted Laser Desorption Ionisation Time Of Flight Mass Spectrometry (MALDI-TOF MS). The short time required for sample preparation and analysis makes possible the study of a wide range of plant organs, revealing a high degree of heterogeneity in the substitution pattern of wall polymers such as the cross-linking glycan xyloglucan and the pectic polysaccharide homogalacturonan. The high sensitivity of MALDI-TOF allows the use of small amounts of samples, thus making it possible to investigate the wall structure of single cell types when material is collected by such methods as laser micro-dissection. As an example, the analysis of the xyloglucan structure in the leaf cell types outer epidermis layer, entire epidermis cell layer, palisade mesophyll cells, and vascular bundles were investigated. OLIMP is amenable to in situ wall analysis, where wall polymers are analyzed on unprepared plant tissue itself without first iso-lating cell walls. In addition, OLIMP enables analysis of wall polymers in Golgi-enriched fractions, the location of nascent matrix polysaccharide biosynthesis, enabling separation of the processes of wall biosynthesis versus post-deposition apo-plastic metabolism. These new tools will make possible a semi-quantitative analysis of the cell wall at an unprecedented level.

  1. Molecular regulation of plant cell wall extensibility

    Science.gov (United States)

    Cosgrove, D. J.

    1998-01-01

    Gravity responses in plants often involve spatial and temporal changes in cell growth, which is regulated primarily by controlling the ability of the cell wall to extend. The wall is thought to be a cellulose-hemicellulose network embedded in a hydrated matrix of complex polysaccharides and a small amount of structural protein. The wall extends by a form of polymer creep, which is mediated by expansins, a novel group of wall-loosening proteins. Expansins were discovered during a molecular dissection of the "acid growth" behavior of cell walls. Expansin alters the rheology of plant walls in profound ways, yet its molecular mechanism of action is still uncertain. It lacks detectable hydrolytic activity against the major components of the wall, but it is able to disrupt noncovalent adhesion between wall polysaccharides. The discovery of a second family of expansins (beta-expansins) sheds light on the biological role of a major group of pollen allergens and implies that expansins have evolved for diverse developmental functions. Finally, the contribution of other processes to wall extensibility is briefly summarized.

  2. Electromagnetic approaches to wall characterization, wall mitigation, and antenna design for through-the-wall radar systems

    Science.gov (United States)

    Thajudeen, Christopher

    Through-the-wall imaging (TWI) is a topic of current interest due to its wide range of public safety, law enforcement, and defense applications. Among the various available technologies such as, acoustic, thermal, and optical imaging, which can be employed to sense and image targets of interest, electromagnetic (EM) imaging, in the microwave frequency bands, is the most widely utilized technology and has been at the forefront of research in recent years. The primary objectives for any Through-the-Wall Radar Imaging (TWRI) system are to obtain a layout of the building and/or inner rooms, detect if there are targets of interest including humans or weapons, determine if there are countermeasures being employed to further obscure the contents of a building or room of interest, and finally to classify the detected targets. Unlike conventional radar scenarios, the presence of walls, made of common construction materials such as brick, drywall, plywood, cinder block, and solid concrete, adversely affects the ability of any conventional imaging technique to properly image targets enclosed within building structures as the propagation through the wall can induce shadowing effects on targets of interest which may result in image degradation, errors in target localization, and even complete target masking. For many applications of TWR systems, the wall ringing signals are strong enough to mask the returns from targets not located a sufficient distance behind the wall, beyond the distance of the wall ringing, and thus without proper wall mitigation, target detection becomes extremely difficult. The results presented in this thesis focus on the development of wall parameter estimation, and intra-wall and wall-type characterization techniques for use in both the time and frequency domains as well as analysis of these techniques under various real world scenarios such as reduced system bandwidth scenarios, various wall backing scenarios, the case of inhomogeneous walls, presence

  3. Interconnections between cell wall polymers, wall mechanics, and cortical microtubules: Teasing out causes and consequences.

    Science.gov (United States)

    Xiao, Chaowen; Anderson, Charles T

    2016-09-01

    In plants, cell wall components including cellulose, hemicelluloses, and pectins interact with each other to form complex extracellular network structures that control cell growth and maintain cell shape. However, it is still not clear exactly how different wall polymers interact, how the conformations and interactions of cell wall polymers relate to wall mechanics, and how these factors impinge on intracellular structures such as the cortical microtubule cytoskeleton. Here, based on studies of Arabidopsis thaliana xxt1 xxt2 mutants, which lack detectable xyloglucan in their walls and display aberrant wall mechanics, altered cellulose patterning and biosynthesis, and reduced cortical microtubule stability, we discuss the potential relationships between cell wall biosynthesis, wall mechanics, and cytoskeletal dynamics in an effort to better understand their roles in controlling plant growth and morphogenesis.

  4. When Walls are No Longer Barriers: Perception of Wall Height in Parkour

    OpenAIRE

    Taylor, J. Eric T.; Witt, Jessica; Sugovic, Mila

    2011-01-01

    Through training, skilled parkour athletes (traceurs) overcome everyday obstacles, such as walls, that are typically insurmountable. Traceurs and untrained novices estimated the height of walls and reported their anticipated ability to climb the wall. The traceurs perceived the walls as shorter than did novices. This result suggests that perception is scaled by the perceiver’s anticipated ability to act, and is consistent with the action-specific account of perception.

  5. External Insulation of Masonry Walls and Wood Framed Walls

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P. [Building Science Corporation, Somerville, MA (United States)

    2013-01-01

    The use of exterior insulation on a building is an accepted and effective means to increase the overall thermal resistance of the assembly that also has other advantages of improved water management and often increased air tightness of building assemblies. For thin layers of insulation (1” to 1 ½”), the cladding can typically be attached directly through the insulation back to the structure. For thicker insulation layers, furring strips have been added as a cladding attachment location. This approach has been used in the past on numerous Building America test homes and communities (both new and retrofit applications), and has been proven to be an effective and durable means to provide cladding attachment. However, the lack of engineering data has been a problem for many designers, contractors, and code officials. This research project developed baseline engineering analysis to support the installation of thick layers of exterior insulation on existing masonry and frame walls. Furthermore, water management details necessary to integrate windows, doors, decks, balconies and roofs were created to provide guidance on the integration of exterior insulation strategies with other enclosure elements.

  6. External Insulation of Masonry Walls and Wood Framed Walls

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P.

    2013-01-01

    The use of exterior insulation on a building is an accepted and effective means to increase the overall thermal resistance of the assembly that also has other advantages of improved water management and often increased air tightness of building assemblies. For thin layers of insulation (1" to 1 1/2"), the cladding can typically be attached directly through the insulation back to the structure. For thicker insulation layers, furring strips have been added as a cladding attachment location. This approach has been used in the past on numerous Building America test homes and communities (both new and retrofit applications), and has been proven to be an effective and durable means to provide cladding attachment. However, the lack of engineering data has been a problem for many designers, contractors, and code officials. This research project developed baseline engineering analysis to support the installation of thick layers of exterior insulation on existing masonry and frame walls. Furthermore, water management details necessary to integrate windows, doors, decks, balconies and roofs were created to provide guidance on the integration of exterior insulation strategies with other enclosure elements.

  7. Results obtained during wall breaching research

    CSIR Research Space (South Africa)

    Hattingh, S

    2008-11-01

    Full Text Available the operator on the charge side of the building. Test walls (double and single brick walls) 3m wide by 2m height were used for testing different charges and their effects due to the different charges. The loop charge was found to be the most promising solution...

  8. Risk Assessment of Energy-Efficient Walls

    Energy Technology Data Exchange (ETDEWEB)

    Pallin, Simon B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jackson, Roderick K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kehrer, Manfred [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-12-01

    This multi-year project aims to provide the residential construction industry with energy-efficient wall designs that are moisture durable. The present work focused on the initial step of this project, which is to develop a moisture durability protocol that identifies energy efficient wall designs that have a low probability of experiencing moisture problems.

  9. Full size testing of sheet pile walls

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de; Linden, M.L.R. van der; Katsma, H.; Stolle, P.

    1996-01-01

    Azobé (Lophira alata) is widely used in timber sheet pile walls in the Netherlands. The boards in these walls are coupled and therefore load-sharing can be expected. A simulation model based on the finite element method DIANA (DIANA, 1992) was developed and load-sharing could be calculated. To check

  10. Moduli of monopole walls and amoebas

    Science.gov (United States)

    Cherkis, Sergey A.; Ward, Richard S.

    2012-05-01

    We study doubly-periodic monopoles, also called monopole walls, determining their spectral data and computing the dimensions of their moduli spaces. Using spectral data we identify the moduli, and compare our results with a perturbative analysis. We also identify an SL(2, {Z}) action on monopole walls, in which the S transformation corresponds to the Nahm transform.

  11. Radiation Damping at a Bubble Wall

    CERN Document Server

    Lee, J; Lee, C H; Jang, J; Lee, Jae-weon; Kim, Kyungsub; Lee, Chul H.; Jang, Ji-ho

    1999-01-01

    The first order phase transition proceeds via nucleation and growth of true vacuum bubbles. When charged particles collide with the bubble they could radiate electromagnetic wave. We show that, due to an energy loss of the particles by the radiation, the damping pressure acting on the bubble wall depends on the velocity of the wall even in a thermal equilibrium state.

  12. Moduli of Monopole Walls and Amoebas

    CERN Document Server

    Cherkis, Sergey A

    2012-01-01

    We study doubly-periodic monopoles, also called monopole walls, determining their spectral data and computing the dimensions of their moduli spaces. Using spectral data we identify the moduli, and compare our results with a perturbative analysis. We also identify an SL(2,Z) action on monopole walls, in which the S transformation corresponds to the Nahm transform.

  13. Mechanics of the Toxoplasma gondii oocyst wall

    Science.gov (United States)

    The ability of microorganisms to survive under extreme conditions is closely related to the physicochemical properties of their wall. In the ubiquitous protozoan parasite Toxoplasma gondii, the oocyst stage possesses a bilayered wall that protects the dormant but potentially infective parasites from...

  14. Solar walls in tsbi3 user's guide

    DEFF Research Database (Denmark)

    Wittchen, K.B.

    tsbi3 is a user-friendly and flexible computer program, which provides support to the design team in the analysis of the indoor climate and the energy performance of buildings. The solar wall module gives tsbi3 the capability of simulating solar walls and their interaction with the building. This...

  15. Detection of Anomalies in Diaphragm Walls

    NARCIS (Netherlands)

    Spruit, R.; Van Tol, F.; Broere, W.

    2015-01-01

    If a calamity with a retaining wall occurs, the impact on surrounding buildings and infrastructure is at least an order of magnitude more severe than without the calamity. In 2005 and 2006 major leaks in the retaining walls of underground stations in Amsterdam and Rotterdam occurred. After these cas

  16. THz reflectometric imaging of medieval wall paintings

    DEFF Research Database (Denmark)

    Dandolo, Corinna Ludovica Koch; Jepsen, Peter Uhd

    2013-01-01

    Terahertz time-domain reflectometry has been applied to the investigation of a medieval Danish wall painting. The technique has been able to detect the presence of carbonblack layer on the surface of the wall painting and a buried insertion characterized by high reflectivity values has been found...... in depth of the lime-based historical plaster....

  17. [The cell wall of Coelastrum (Chlorophycees)].

    Science.gov (United States)

    Reymond, O

    1975-01-01

    The cell wall of Coelastrum is usually composed of three layers. The outermost layer was studied most extensively. It consists of erect tubules which often bear long bristles whose function may be to stabilize the algae in its enviroment. The cell wall can modify its morphology according to the enviroment.

  18. Designing and building walls with Rammed Earth

    NARCIS (Netherlands)

    Galiouna, E.A.; Hammer, L.; Piscitelli, G.

    2014-01-01

    This "designers' manual" is made during the TIDO-course AR0533 Innovation & Sustainability. Today, a lot of people in the world live in earth dwellings. There are many different techniques for constructing solid walls of raw earth (adobe, bale, cob, mud wall, light clay, wattle and daub, earth bags

  19. Designing and building walls with Rammed Earth

    NARCIS (Netherlands)

    Galiouna, E.A.; Hammer, L.; Piscitelli, G.

    2014-01-01

    This "designers' manual" is made during the TIDO-course AR0533 Innovation & Sustainability. Today, a lot of people in the world live in earth dwellings. There are many different techniques for constructing solid walls of raw earth (adobe, bale, cob, mud wall, light clay, wattle and daub, earth

  20. Domain Wall Propagation through Spin Wave Emission

    NARCIS (Netherlands)

    Wang, X.S.; Yan, P.; Shen, Y.H.; Bauer, G.E.W.; Wang, X.R.

    2012-01-01

    We theoretically study field-induced domain wall motion in an electrically insulating ferromagnet with hard- and easy-axis anisotropies. Domain walls can propagate along a dissipationless wire through spin wave emission locked into the known soliton velocity at low fields. In the presence of damping

  1. Composite panel, wall assembly and components therefor

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.J.

    1988-12-20

    This invention is concerned with improvements in wall assemblies made of a plurality of composite wall panels, such as concrete wall panels, and components and connectors for such assemblies. The invention is also concerned with a method of making such composite wall panels by molding concrete to form a concrete panel. It is particularly applicable for the provision of upstanding walls around oil tanks and hydrocarbon storage facilities, thereby to form part of a containment structure that can satisfy safety regulations for spills around such facilities. In accordance with another aspect of the invention, there is provided a composite building product comprising a concrete panel, said panel being obtained by molding a respective concrete composition. The panel has at least one metal hinge element integrally secured at a respective peripheral edge, with said metal hinge element being secured at the panel to project sufficiently therefrom so as to present a first hinge element. Several of the panels can be connected in a corral-type wall assembly in a variety of configuration. Another aspect of the invention provides, for use in a wall assembly, a portable composite panel comprising a concrete panel body, which is obtained by molding a respective concrete composition; and a frame assembly for reinforcing the peripheral edges of said concrete panel body. The frame assembly includes at least one metal member for provision of a first hing element for connecting a plurality of said panels in a corral-type wall assembly. 7 figs.

  2. Reliability Analysis of Existing Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Sørensen, John Dalsgaard

    1998-01-01

    Vertical wall breakwaters are used under quite different conditions where failure of the breakwater or a part of it will have very different consequences. Further a number of existing vertical wall breakwaters have been subjected to significant wave loads which have caused partial failures...

  3. Safety Aspects for Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

    1996-01-01

    In this appendix some safety aspects in relation to vertical wall breakwaters are discussed. Breakwater structures such as vertical wall breakwaters are used under quite different conditions. The expected lifetime can be from 5 years (interim structure) to 100 years (permanent structure...

  4. Wind Load Test of Earthbag Wall

    Directory of Open Access Journals (Sweden)

    Ryan Scott

    2013-08-01

    Full Text Available Earthbag construction is a sustainable, low-cost, housing option for developing countries. Earthbag structures are built of individual soil-filled fabric bags (i.e., sand bags stacked in a running bond pattern. Once stacked, earthbags are compacted and the soil inside the bags is dried in-place to form earthen bricks. Barbed wires are placed between each course to affect shear transfer within the wall. Results of an out-of-plane load test on a full-scale earthbag wall are presented in this paper. The wall was subjected to out-of-plane pressure up to 3.16 kPa, which resulted in plastic deformations up to 50 mm. The wall did not collapse during loading. Wall behavior and force transfer mechanisms are discussed.

  5. 2003 Plant Cell Walls Gordon Conference

    Energy Technology Data Exchange (ETDEWEB)

    Daniel J. Cosgrove

    2004-09-21

    This conference will address recent progress in many aspects of cell wall biology. Molecular, genetic, and genomic approaches are yielding major advances in our understanding of the composition, synthesis, and architecture of plant cell walls and their dynamics during growth, and are identifying the genes that encode the machinery needed to make their biogenesis possible. This meeting will bring together international scientists from academia, industry and government labs to share the latest breakthroughs and perspectives on polysaccharide biosynthesis, wood formation, wall modification, expansion and interaction with other organisms, and genomic & evolutionary analyses of wall-related genes, as well as to discuss recent ''nanotechnological'' advances that take wall analysis to the level of a single cell.

  6. Thoracic wall reconstruction after tumor resection

    Directory of Open Access Journals (Sweden)

    Kamran eHarati

    2015-10-01

    Full Text Available Introduction: Surgical treatment of malignant thoracic wall tumors represents a formidable challenge. In particular, locally advanced tumors that have already infiltrated critical anatomic structures are associated with a high surgical morbidity and can result in full thickness defects of the thoracic wall. Plastic surgery can reduce this surgical morbidity by reconstructing the thoracic wall through various tissue transfer techniques. Sufficient soft tissue reconstruction of the thoracic wall improves life quality and mitigates functional impairment after extensive resection. The aim of this article is to illustrate the various plastic surgery treatment options in the multimodal therapy of patients with malignant thoracic wall tumors.Material und methods: This article is based on a review of the current literature and the evaluation of a patient database.Results: Several plastic surgical treatment options can be implemented in the curative and palliative therapy of patients with malignant solid tumors of the chest wall. Large soft tissue defects after tumor resection can be covered by local, pedicled or free flaps. In cases of large full-thickness defects, flaps can be combined with polypropylene mesh to improve chest wall stability and to maintain pulmonary function. The success of modern medicine has resulted in an increasing number of patients with prolonged survival suffering from locally advanced tumors that can be painful, malodorous or prone to bleeding. Resection of these tumors followed by thoracic wall reconstruction with viable tissue can substantially enhance the life quality of these patients. Discussion: In curative treatment regimens, chest wall reconstruction enables complete resection of locally advanced tumors and subsequent adjuvant radiotherapy. In palliative disease treatment, stadium plastic surgical techniques of thoracic wall reconstruction provide palliation of tumor-associated morbidity and can therefore improve

  7. Integrating Building Functions into Massive External Walls

    Directory of Open Access Journals (Sweden)

    Ahmed Hisham Hafez

    2016-05-01

    Full Text Available Well into the twentieth century, brick and stone were the materials used. Bricklaying and stonemasonry were the construction technologies employed for the exterior walls of virtually all major structures. However, with the rise in quality of life, the massive walls alone became incapable of fulfilling all the developed needs. Adjacent systems and layers had then to be attached to the massive layer. Nowadays, the external wall is usually composed of a layered construction. Each external wall function is usually represented by a separate layer or system. The massive layer of the wall is usually responsible for the load-bearing function.Traditional massive external walls vary in terms of their external appearance, their composition and attached layers. However, their design and construction process is usually a repeated process. It is a linear process where each discipline is concerned with a separate layer or system. These disciplines usually take their tasks away and bring them back to be re-integrated in a layered manner. New massive technologies with additional function have recently become available.Such technologies can provide the external wall with other functions in addition to its load-bearing function. The purpose of this research is to map the changes required to the traditional design and construction process when massive technologies with additional function are applied in external walls. Moreover, the research aims at assessing the performance of massive solutions with additional function when compared to traditional solutions in two different contexts, the Netherlands and Egypt.Through the analysis of different additional function technologies in external walls, a guidance scheme for different stakeholders is generated. It shows the expected process changes as related to the product level and customization level. Moreover, the research concludes that the performance of additional insulating technologies, and specifically Autoclaved

  8. Mirror, mirror on the wall

    CERN Multimedia

    2005-01-01

    RICH 2, one of the two Ring Imaging Cherenkov detectors of the LHCb experiment, is being prepared to join the other detector elements ready for the first proton-proton collisions at LHC. The mirrors of the RICH2 detector are meticulously assembled in a clean room.In a large dark room, men in white move around an immense structure some 7 metres high, 10 metres wide and nearly 2.5 metres deep. Apparently effortlessly, they are installing the two large high-precision spherical mirrors. These mirrors will focus Cherenkov light, created by the charged particles that will traverse this detector, onto the photon detectors. Each spherical mirror wall is made up of facets like a fly's eye. Twenty-eight individual thin glass mirrors will all point to the same point in space to within a few micro-radians. The development of these mirrors has been technically demanding : Ideally they should be massless, sturdy, precise and have high reflectivity. In practice, though not massless, they are made from a mere 6 mm thin gl...

  9. Final Report for "Stabilization of resistive wall modes using moving metal walls"

    Energy Technology Data Exchange (ETDEWEB)

    Forest, Cary B.

    2014-02-05

    The UW experiment used a linear pinch experiment to study the stabilization of MHD by moving metal walls. The methodology of the experiment had three steps. (1) Identify and understand the no-wall MHD instability limits and character, (2) identify and understand the thin-wall MHD instabilities (re- sistive wall mode), and then (3) add the spinning wall and understand its impact on stability properties. During the duration of the grant we accomplished all 3 of these goals, discovered new physics, and completed the experiment as proposed.

  10. Solar walls in tsbi3 user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Wittchen, K.B.

    1997-12-01

    Tsbi3 is a user-friendly and flexible computer program, which provides support to the design team in the analysis of the indoor climate and the energy performance of buildings. The solar wall module gives tsbi3 the capability of simulating solar walls and their interaction with the building. This version, C, of tsbi3 is capable of simulating five types of solar walls say: mass-walls, Trombe-walls, double Trombe-walls, internally ventilated walls and solar walls for preheating ventilation air. The user`s guide gives a description of the capabilities and how to simulate solar walls in tsbi3. (au)

  11. Wall shear stress measurement in blade end-wall corner region

    Science.gov (United States)

    Bhargava, R.; Raj, R.; Boldman, D. R.

    1987-01-01

    The magnitude and the direction of wall shear stress and surface pressure in the blade end-wall corner region were investigated. The measurements were obtained on a specially designed Preston tube, the tip of which could be concentrically rotated about its axis of rotation at the measurement location. The magnitude of wall shear stress in the vicinity of the corner was observed to increase significantly (170 percent) compared to its far-upstream value; the increase was consistently higher on the blade surface compared to the value on the plate surface of the blade end-wall corner. On both surfaces in the blade end-wall corner, the variation of the wall shear stress direction was found to be more predominant in the vicinity of the blade leading-edge location. The trend of the measured wall shear stress direction showed good agreement with the limiting streamline directions obtained from the flow visualization studies.

  12. Isolation of plant cell wall proteins.

    Science.gov (United States)

    Jamet, Elisabeth; Boudart, Georges; Borderies, Giséle; Charmont, Stephane; Lafitte, Claude; Rossignol, Michel; Canut, Herve; Pont-Lezica, Rafael

    2008-01-01

    The quality of a proteomic analysis of a cell compartment strongly depends on the reliability of the isolation procedure for the cell compartment of interest. Plant cell walls possess specific drawbacks: (1) the lack of a surrounding membrane may result in the loss of cell wall proteins (CWP) during the isolation procedure; (2) polysaccharide networks of cellulose, hemicelluloses, and pectins form potential traps for contaminants such as intracellular proteins; (3) the presence of proteins interacting in many different ways with the polysaccharide matrix require different procedures to elute them from the cell wall. Three categories of CWP are distinguished: labile proteins that have little or no interactions with cell wall components, weakly bound proteins extractable with salts, and strongly bound proteins. Two alternative protocols are decribed for cell wall proteomics: (1) nondestructive techniques allowing the extraction of labile or weakly bound CWP without damaging the plasma membrane; (2) destructive techniques to isolate cell walls from which weakly or strongly bound CWP can be extracted. These protocols give very low levels of contamination by intracellular proteins. Their application should lead to a realistic view of the cell wall proteome at least for labile and weakly bound CWP extractable by salts.

  13. Recent advances in plant cell wall proteomics.

    Science.gov (United States)

    Jamet, Elisabeth; Albenne, Cécile; Boudart, Georges; Irshad, Muhammad; Canut, Hervé; Pont-Lezica, Rafael

    2008-02-01

    The plant extracellular matrix contains typical polysaccharides such as cellulose, hemicelluloses, and pectins that interact to form dense interwoven networks. Plant cell walls play crucial roles during development and constitute the first barrier of defense against invading pathogens. Cell wall proteomics has greatly contributed to the description of the protein content of a compartment specific to plants. Around 400 cell wall proteins (CWPs) of Arabidopsis, representing about one fourth of its estimated cell wall proteome, have been described. The main points to note are that: (i) the diversity of enzymes acting on polysaccharides suggests a great plasticity of cell walls; (ii) CWPs such as proteases, polysaccharide hydrolytic enzymes, and lipases may contribute to the generation of signals; (iii) proteins of unknown functions were identified, suggesting new roles for cell walls. Recently, the characterization of PTMs such as N- and O-glycosylations improved our knowledge of CWP structure. The presence of many glycoside hydrolases and proteases suggests a complex regulation of CWPs involving various types of post-translational events. The first 3-D structures to be resolved gave clues about the interactions between CWPs, or between CWPs and polysaccharides. Future work should include: extracting and identifying CWPs still recalcitrant to proteomics, describing the cell wall interactome, improving quantification, and unraveling the roles of each of the CWPs.

  14. Accelerating forward genetics for cell wall deconstruction

    Directory of Open Access Journals (Sweden)

    Danielle eVidaurre

    2012-06-01

    Full Text Available One of the biggest challenges of cell wall biology is the elucidation of the genes involved the cell wall and their function due to the recalcitrance of the cell wall. Through traditional genetic approaches, many simple yet elegant screens have been able to identify components of the cell wall and their networks. Despite progress in the identification of several genes of the cell wall, there remain many unknown players whose function has yet to be determined. Exhausting the genetic toolbox by performing secondary screens on a genetically mutated background, chemical genetics using small molecules and improved cell wall imaging hold promise for new gene discovery and function. With the recent introduction of next-generation sequencing technologies, it is now possible to quickly and efficiently map and clone genes of interest in Arabidopsis and any model organism with a completed genome sequence. The combination of a classical genetics approach and cutting edge technology will propel cell wall biology of Arabidopsis and other useful crops forward into the future.

  15. Automatic configuration of modular vault walls

    Directory of Open Access Journals (Sweden)

    Grković Vladan

    2012-01-01

    Full Text Available Products such as modular partition walls of vault rooms (with or without vault doors are made at the request of the client who chooses the safety degree and provides the available dimensions of the wall that should be made. Modular construction of vault walls is the system of construction of industrially made elements which are composed in situ, which allows design of products adjusted to individual requirements of clients. Since the vault wall modules repeat in every new project and since they differ only by their number and dimensions, the use of modern CA (Computer Aided tools and the possibility of application of parameter and variant design shorten design time and eliminate possible errors in the process of design of modular vault walls, which reduces the costs of production and increases the level of product quality. The paper presents the procedure for calculation of parameters of parts, modules and the entire vault wall in Microsoft Excel based on which the 3D model of a modular vault wall is automatically configured and developed in software package Autodesk Inventor. [Projekat Ministarstva nauke Republike Srbije, br. TR37020

  16. Development of wall ranging radiation inspection robot

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B. J.; Yoon, J. S.; Park, Y. S.; Hong, D. H.; Oh, S. C.; Jung, J. H.; Chae, K. S

    1999-03-01

    With the aging of nation's nuclear facilities, the target of this project is to develop an under water wall ranging robotic vehicle which inspects the contamination level of the research reactor (TRIGA MARK III) as a preliminary process to dismantling. The developed vehicle is driven by five thrusters and consists of small sized control boards, and absolute position detector, and a radiation detector. Also, the algorithm for autonomous navigation is developed and its performance is tested through under water experiments. Also, the test result at the research reactor shows that the vehicle firmly attached the wall while measuring the contamination level of the wall.

  17. Domain wall solutions with Abelian gauge fields

    CERN Document Server

    Rozowsky, J S; Wali, K C

    2004-01-01

    We study kink (domain wall) solutions in a model consisting of two complex scalar fields coupled to two independent Abelian gauge fields in a Lagrangian that has $U(1)\\times U(1)$ gauge plus $\\mathbb{Z}_2$ discrete symmetry. We find consistent solutions such that while the U(1) symmetries of the fields are preserved while in their respective vacua, they are broken on the domain wall. The gauge field solutions show that the domain wall is sandwiched between domains with constant magnetic fields.

  18. Thin wall ductile and austempered iron castings

    OpenAIRE

    E. Fraś; M. Górny

    2010-01-01

    It has been shown that it is possible to produce thin wall castings made of ductile iron with wall thickness in the range of 1.2 to 2.9 mm(without chills, cold laps and misruns). Thin wall ductile iron castings can be lighter (380 g) than their substitutes made of aluminium alloys (580g). The kinetics of austenitising transformation was studied in unalloyed ductile iron. The advance of transformations during austenitising was monitored by measurement the fraction of martensite and also by dil...

  19. Do Stops Slow Down Electroweak Bubble Walls?

    CERN Document Server

    John, P

    2001-01-01

    We compute the wall velocity in the MSSM. We therefore generalize the SMequations of motion for bubble walls moving through a hot plasma at theelectroweak phase transition and calculate the friction terms which describethe viscosity of the plasma. We give the general expressions and apply them toa simple model where stops, tops and W bosons contribute to the friction. In awide range of parameters including those which fulfil the requirements ofbaryogenesis we find a wall velocity of order v = 0.001-0.01 much below the SMvalue.

  20. Combined Visualization of Wall Thickness and Wall Shear Stress for the Evaluation of Aneurysms.

    Science.gov (United States)

    Glaßer, Sylvia; Lawonn, Kai; Hoffmann, Thomas; Skalej, Martin; Preim, Bernhard

    2014-12-01

    For an individual rupture risk assessment of aneurysms, the aneurysm's wall morphology and hemodynamics provide valuable information. Hemodynamic information is usually extracted via computational fluid dynamic (CFD) simulation on a previously extracted 3D aneurysm surface mesh or directly measured with 4D phase-contrast magnetic resonance imaging. In contrast, a noninvasive imaging technique that depicts the aneurysm wall in vivo is still not available. Our approach comprises an experiment, where intravascular ultrasound (IVUS) is employed to probe a dissected saccular aneurysm phantom, which we modeled from a porcine kidney artery. Then, we extracted a 3D surface mesh to gain the vessel wall thickness and hemodynamic information from a CFD simulation. Building on this, we developed a framework that depicts the inner and outer aneurysm wall with dedicated information about local thickness via distance ribbons. For both walls, a shading is adapted such that the inner wall as well as its distance to the outer wall is always perceivable. The exploration of the wall is further improved by combining it with hemodynamic information from the CFD simulation. Hence, the visual analysis comprises a brushing and linking concept for individual highlighting of pathologic areas. Also, a surface clustering is integrated to provide an automatic division of different aneurysm parts combined with a risk score depending on wall thickness and hemodynamic information. In general, our approach can be employed for vessel visualization purposes where an inner and outer wall has to be adequately represented.

  1. Function of laccases in cell wall biosynthesis

    DEFF Research Database (Denmark)

    Larsen, Anders; Holm, Preben Bach; Andersen, Jeppe Reitan

    2011-01-01

    substrate specificities and expression patterns. As part of the strategic research centre Bio4Bio, the present project deals with laccase functions in relation to cell wall formation in grasses based on a study of the model species Brachypodium distachyon. Thirty-one isozymes have been retrieved from......Laccases are multicopper oxidases capable of polymerizing monolignols. Histochemical assays have shown temporal and spatial correlation with secondary cell wall formation in both herbs and woody perennials. However, in plants laccases constitutes a relatively large group of isoenzymes with unique...... hybridization. Specific isozymes that show high correlation with the process of secondary cell wall formation will be further studied in a reverse genetic study in which candidates will be knocked out using RNA interference. Phenotypes of knock-out mutants are to be described in relation to cell wall...

  2. combined spatially and temporally structured walls

    Directory of Open Access Journals (Sweden)

    D. N. Riahi

    1999-01-01

    Full Text Available Benney's theory of evolution of disturbances in shear flows over smooth and flat boundary is extended to study for shear flows over combined spatially and temporally corrugated walls. Perturbation and multiple-scales analyses are employed for the case where both amplitude of the corrugations and the amplitude of wave motion are small. Analyses for instability of modulated mean shear flows with respect to spanwise-periodic disturbance rolls and for the subsequent vortex formation and vortex stability are presented, and the effects of the corrugated walls on the resulting flow and vortices are determined. It is found that particular corrugated walls can originate and control the longitudinal vortices, while some other types of corrugated walls can enhance instability of such vortices.

  3. NEW RSW & Wall Coarse Tet Only Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the RSW Coarse Tet Only grid with the root viscous tunnel wall. This grid is for a node-based unstructured solver. Quad Surface Faces= 0 Tria Surface Faces=...

  4. NEW RSW & Wall Medium Fully Tetrahedral Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — New Medium Fully Tetrahedral RSW Grid with viscous wind tunnel wall at the root. This grid is for a node-based unstructured solver. Medium Tet: Quad Surface Faces= 0...

  5. NEW RSW & Wall Medium Mixed Element Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — RSW Medium Mixed Element Grid with Viscous Wind Tunnel Wall at the root. This grid is for a node-based unstructured solver. Quad Surface Faces= 18432 Tria Surface...

  6. Domain wall magneto-Seebeck effect

    Science.gov (United States)

    Krzysteczko, Patryk; Hu, Xiukun; Liebing, Niklas; Sievers, Sibylle; Schumacher, Hans W.

    2015-10-01

    The interplay between charge, spin, and heat currents in magnetic nanostructures subjected to a temperature gradient has led to a variety of novel effects and promising applications studied in the fast-growing field of spin caloritronics. Here, we explore the magnetothermoelectrical properties of an individual magnetic domain wall in a permalloy nanowire. In thermal gradients of the order of few K /μ m along the long wire axis, we find a clear magneto-Seebeck signature due to the presence of a single domain wall. The observed domain wall magneto-Seebeck effect can be explained by the magnetization-dependent Seebeck coefficient of permalloy in combination with the local spin configuration of the domain wall.

  7. Plant Wall Degradative Compounds and Systems

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The present invention relates to cell wall degradative systems, in particular to systems containing enzymes that bind to and/or depolymerize cellulose. These systems...

  8. NEW RSW & Wall Fine Fully Tetrahedral Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — NEW RSW Fine Fully Tetrahedral Grid with Viscous Wind Tunnel wall at the root. This grid is for a node-based unstructured solver. Note that the CGNS file is very...

  9. Statics of Thin-Walled Pretwisted Beams

    DEFF Research Database (Denmark)

    Krenk, Steen; Gunneskov, O.

    1981-01-01

    The displacement and strain fields of thin-walled pretwisted beams are prescribed in terms of generalized displacements for extension, bending, torsion and warping. Differential equations and boundary conditions are obtained from the elastic potential energy functional without assuming coincidenc...

  10. NEW RSW & Wall Fine Mixed Element Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — RSW Fine Mixed Element Grid with viscous root wind tunnel wall. This grid is for a node-based unstructured solver. Quad Surface Faces= 38016 Tria Surface Faces=...

  11. NEW RSW & Wall Coarse Mixed Element Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the Coarse Mixed Element Grid for the RSW with a viscous wall at the root. This grid is for a node-based unstructured solver. Quad Surface Faces= 9728 Tria...

  12. Preoperative steroid in abdominal wall reconstruction

    DEFF Research Database (Denmark)

    Jensen, Kristian Kiim; Brøndum, Tina Lee; Belhage, Bo

    2016-01-01

    INTRODUCTION: Preoperative administration of high-dose glucocorticoid leads to improved recovery and decreased length of stay after abdominal surgery. Even so, studies on administration of glucocorticoids for patients undergoing abdominal wall reconstruction (AWR) for giant ventral hernia repair ...

  13. Static inelastic analysis of RC shear walls

    Science.gov (United States)

    Chen, Qin; Qian, Jiaru

    2002-06-01

    A macro-model of a reinforced concrete (RC) shear wall is developed for static inelastic analysis. The model is composed of RC column elements and RC membrane elements. The column elements are used to model the boundary zone and the membrane elements are used to model the wall panel. Various types of constitutive relationships of concrete could be adopted for the two kinds of elements. To perform analysis, the wall is divided into layers along its height. Two adjacent layers are connected with a rigid beam. There are only three unknown displacement components for each layer. A method called single degree of freedom compensation is adopted to solve the peak value of the capacity curve. The post-peak stage analysis is performed using a forced iteration approach. The macro-model developed in the study and the complete process analysis methodology are verified by the experimental and static inelastic analytical results of four RC shear wall specimens.

  14. Thin wall ductile and austempered iron castings

    Directory of Open Access Journals (Sweden)

    E. Fraś

    2010-07-01

    Full Text Available It has been shown that it is possible to produce thin wall castings made of ductile iron with wall thickness in the range of 1.2 to 2.9 mm(without chills, cold laps and misruns. Thin wall ductile iron castings can be lighter (380 g than their substitutes made of aluminium alloys (580g. The kinetics of austenitising transformation was studied in unalloyed ductile iron. The advance of transformations during austenitising was monitored by measurement the fraction of martensite and also by dilatometic studies. It has been shown that in thin wall ductile iron castings austenitising at 880 oC for 20 minutes is adequate to obtain the austenite matrix at the end of the first stage of austempering heat treatment cycle.

  15. On thick domain walls in general relativity

    Science.gov (United States)

    Goetz, Guenter; Noetzold, Dirk

    1989-01-01

    Planar scalar field configurations in general relativity differ considerably from those in flat space. It is shown that static domain walls of finite thickness in curved space-time do not possess a reflection symmetry. At infinity, the space-time tends to the Taub vacuum on one side of the wall and to the Minkowski vacuum (Rindler space-time) on the other. Massive test particles are always accelerated towards the Minkowski side, i.e., domain walls are attractive on the Taub side, but repulsive on the Minkowski side (Taub-vacuum cleaner). It is also proved that the pressure in all directions is always negative. Finally, a brief comment is made concerning the possibility of infinite, i.e., bigger than horizon size, domain walls in our universe. All of the results are independent of the form of the potential V(phi) greater than or equal to 0 of the scalar field phi.

  16. Static inelastic analysis of RC shear walls

    Institute of Scientific and Technical Information of China (English)

    陈勤; 钱稼茹

    2002-01-01

    A macro-model of a reinforced concrete (RC) shear wall is developed for static inelastic analysis. The model iscomposed of RC column elements and RC membrane elements. The column elements are used to model the boundary zone andthe membrane elements are used to model the wall panel. Various types of constitutive relationships of concrete could beadopted for the two kinds of elements. To perform analysis, the wall is divided into layers along its height. Two adjacent layersare connected with a rigid beam. There are only three unknown displacement components for each layer. A method called singledegree of freedom compensation is adopted to solve the peak value of the capacity curve. The post-peak stage analysis isperformed using a forced iteration approach. The macro-model developed in the study and the complete process analysismethodology are verified by the experimental and static inelastic analytical results of four RC shear wall specimens.

  17. Axions from cosmic string and wall decay

    Energy Technology Data Exchange (ETDEWEB)

    Hagmann, C A

    2010-03-10

    If inflation occurred with a reheat temperature > T{sub PQ}, axions from the decay of global axion strings and domain walls would make an important contribution to the cosmological energy density, comparable to that from vacuum misalignment. Several groups have numerically studied the evolution of axion strings and walls in the past, however substantial uncertainties remain in their contribution to the present density {Omega}{sub a,string+wall} {approx} 1-100 (f{sub a}/10{sup 12} GeV){sup 7/6}, where f{sub a} is the axion decay constant. I will describe the numerical methods used in our simulations and show results for several string and wall configurations.

  18. Wall Shear Rates in Taylor Vortex Flow

    Directory of Open Access Journals (Sweden)

    V. Sobolik

    2011-01-01

    Full Text Available Wall shear rate and its axial and azimuthal components were evaluated in stable Taylor vortices. The measurements were carried out in a broad interval of Taylor numbers (52-725 and several gap width (R1/R2 = 0.5 – 0.8 by two three-segment electrodiffusion probes and three single probes flush mounted in the wall of the outer fixed cylinder. The axial distribution of wall shear rate components was obtained by sweeping the vortices along the probes using a slow axial flow. The experimental results were verified by CFD simulations. The knowledge of local wall shear rates and its fluctuations is of primordial interest for industrial applications like tangential filtration, membrane reactors and bioreactors containing shear sensitive cells.

  19. Manufacturing Advanced Channel Wall Rocket Liners Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR will adapt and demonstrate a low cost flexible method of manufacturing channel wall liquid rocket nozzles and combustors, while providing developers a...

  20. Applications of Green Walls in Urban Design

    Science.gov (United States)

    Virtudes, Ana; Manso, Maria

    2016-10-01

    Green walls are a choice towards achieving sustainable urban rehabilitation, due to the lack of free space in the consolidated urban fabric. Nowadays, green walls are considered to be an innovation in the fields of ecology, horticulture or buildings. Nevertheless, in the domain of urban design, they are still surprising and unexpected ideas. Thus, this research aims to reflect on green walls as a feature in urban design and rehabilitation, identifying the advantages of their utilization as an enhancement of the quality of city's image, especially in dense urban areas. It aims to demonstrate some practical applications of green walls in urban design proposals, showing model solutions and their real application in several architectural examples.

  1. Preoperative steroid in abdominal wall reconstruction

    DEFF Research Database (Denmark)

    Jensen, Kristian Kiim; Brøndum, Tina Lee; Belhage, Bo;

    2016-01-01

    INTRODUCTION: Preoperative administration of high-dose glucocorticoid leads to improved recovery and decreased length of stay after abdominal surgery. Even so, studies on administration of glucocorticoids for patients undergoing abdominal wall reconstruction (AWR) for giant ventral hernia repair ...

  2. Cell wall proteins: a new insight through proteomics.

    Science.gov (United States)

    Jamet, Elisabeth; Canut, Hervé; Boudart, Georges; Pont-Lezica, Rafael F

    2006-01-01

    Cell wall proteins are essential constituents of plant cell walls; they are involved in modifications of cell wall components, wall structure, signaling and interactions with plasma membrane proteins at the cell surface. The application of proteomic approaches to the cell wall compartment raises important questions: are there technical problems specific to cell wall proteomics? What kinds of proteins can be found in Arabidopsis walls? Are some of them unexpected? What sort of post-translational modifications have been characterized in cell wall proteins to date? The purpose of this review is to discuss the experimental results obtained to date using proteomics, as well as some of the new questions challenging future research.

  3. Effect of shear on duct wall impedance.

    Science.gov (United States)

    Goldstein, M.; Rice, E.

    1973-01-01

    The solution to the equation governing the propagation of sound in a uniform shear layer is expressed in terms of parabolic cylinder functions. This result is used to develop a closed-form solution for acoustic wall impedance which accounts for both the duct liner and the presence of a boundary layer in the duct. The effective wall impedance can then be used as the boundary condition for the much simpler problem of sound propagation in uniform flow.

  4. The Great Wall for the first time

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>Jin Shanling is on the way of a spectacular 7 mile hike to the incredible knife-edge peaks at Simatai. From each watch-tower (67 are said to grace this section) it is like the Great Wall for the first time. It is a swaying cable bridge crosses to Simatai. Atop tours reached through steep, narrow steps are million-dollar vistas of an endless dragon’s tail. Here, the wall

  5. Isolation of plant cell wall proteins

    OpenAIRE

    Jamet, Elisabeth; Boudart, Georges; Borderies, Gisèle; Charmont, Stéphane; Lafitte, Claude; Rossignol, Michel; Canut, Hervé; Pont-Lezica, Rafael F

    2007-01-01

    The quality of a proteomic analysis of a cell compartment strongly depends on the reliability of the isolation procedure for the cell compartment of interest. Plant cell walls possess specific drawbacks: (i) the lack of a surrounding membrane may result in the loss of cell wall proteins (CWP) during the isolation procedure; (ii) polysaccharide networks of cellulose, hemicelluloses and pectins form potential traps for contaminants such as intracellular proteins; (iii) the presence of proteins ...

  6. Relevant surgical anatomy of the chest wall

    OpenAIRE

    Rajesh, Pala Babu; Naidu, Babu V.

    2010-01-01

    The chest wall, like other regional anatomy, is a remarkable fusion of form and function. Principal functions are the protection of internal viscera and an expandable cylinder facilitating variable gas flow into the lungs. Knowledge of the anatomy of the whole cylinder (ribs, sternum, vertebra, diaphragm, intercostal spaces, and extrathoracic muscles) is therefore not only important in the local environment of a specific chest wall resection but also in its relation to overall function. An un...

  7. Domain Wall Evolution in Phase Transforming Oxides

    Science.gov (United States)

    2015-01-14

    PERFORMING ORGANIZATION NAMES AND ADDRESSES 8. PERFORMI:N’G ORGANIZATION REPORT University ofFioridaOffice ofEngineering NUMBER 339 Wei I Hall ...surveillance, navigation, tlrreat identification, target acquisition, and missile guidance. Domain wall motion, or the planar defects separating regions of...surveillance, navigation, threat identification, target acquisition, and missile guidance. Domain wall motion, or the planar defects separating regions of

  8. Thermal Bridge Effects in Walls Separating Rowhouses

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures.......In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures....

  9. Thermal Bridge Effects in Walls Separating Rowhouses

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures.......In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures....

  10. Dynamic response of flexible retaining walls

    Energy Technology Data Exchange (ETDEWEB)

    Younan, A.H.; Veletsos, A.S.; Bandyopadhyay, K.

    1997-01-01

    Making use of an extension of a recently proposed, relatively simple, approximate method of analysis, a critical evaluation is made of the response to horizontal ground shaking of flexible walls retaining a uniform, linear, viscoelastic stratum of constant thickness and semiinfinite extent in the horizontal direction. Both cantilever and top-supported walls are examined. Following a detailed description of the method and of its rate of convergence, comprehensive numerical solutions are presented that elucidate the action of the system and the effects of the various parameters involved. The parameters varied include the flexibility of the wall, the condition of top support, and the characteristics of the ground motion. The effects of both harmonic base motions and an actual earthquake record are examined. Special attention is paid to the effects of long-period, effectively static excitations. A maximum dynamic response is then expressed as the product of the corresponding static response and an appropriate amplification or deamplification factor. The response quantities examined include the displacements of the wall relative to the moving base, the dynamic wall pressures, and the total wall force, base shear and base moment.

  11. A Wall of Funnels Concentrates Swimming Bacteria▿

    Science.gov (United States)

    Galajda, Peter; Keymer, Juan; Chaikin, Paul; Austin, Robert

    2007-01-01

    Randomly moving but self-propelled agents, such as Escherichia coli bacteria, are expected to fill a volume homogeneously. However, we show that when a population of bacteria is exposed to a microfabricated wall of funnel-shaped openings, the random motion of bacteria through the openings is rectified by tracking (trapping) of the swimming bacteria along the funnel wall. This leads to a buildup of the concentration of swimming cells on the narrow opening side of the funnel wall but no concentration of nonswimming cells. Similarly, we show that a series of such funnel walls functions as a multistage pump and can increase the concentration of motile bacteria exponentially with the number of walls. The funnel wall can be arranged along arbitrary shapes and cause the bacteria to form well-defined patterns. The funnel effect may also have implications on the transport and distribution of motile microorganisms in irregular confined environments, such as porous media, wet soil, or biological tissue, or act as a selection pressure in evolution experiments. PMID:17890308

  12. Robust ferromagnetism carried by antiferromagnetic domain walls

    Science.gov (United States)

    Hirose, Hishiro T.; Yamaura, Jun-Ichi; Hiroi, Zenji

    2017-02-01

    Ferroic materials, such as ferromagnetic or ferroelectric materials, have been utilized as recording media for memory devices. A recent trend for downsizing, however, requires an alternative, because ferroic orders tend to become unstable for miniaturization. The domain wall nanoelectronics is a new developing direction for next-generation devices, in which atomic domain walls, rather than conventional, large domains themselves, are the active elements. Here we show that atomically thin magnetic domain walls generated in the antiferromagnetic insulator Cd2Os2O7 carry unusual ferromagnetic moments perpendicular to the wall as well as electron conductivity: the ferromagnetic moments are easily polarized even by a tiny field of 1 mT at high temperature, while, once cooled down, they are surprisingly robust even in an inverse magnetic field of 7 T. Thus, the magnetic domain walls could serve as a new-type of microscopic, switchable and electrically readable magnetic medium which is potentially important for future applications in the domain wall nanoelectronics.

  13. Abdominal Wall Hernias: Various Imaging Features Correlated with the Anatomy of Abdominal Wall at MDCT

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Shin Young; Shin, Hyeong Cheol; Kim, Sang Won; Kim, Il Young; Kim, Young Tong [Soonchunhyang University Cheonan Hospital, Cheonan (Korea, Republic of)

    2009-07-15

    Abdominal wall hernias are a common condition. However, they may develop acute complications and require surgical correction in most cases. Hence, the correct radiological examination is requisite for an accurate diagnosis. A multi-detector row CT (MDCT) provides an accurate identification of the anatomy of the abdominal wall, precise hernia type, and helps in the detection of early signs of complication. We report various imaging features of abdominal wall hernias via a MDCT.

  14. Noninvasive Stiffness Sensing of Ventricular Wall Based on a Thick-walled Cylinder Model

    Science.gov (United States)

    Higashimori, Mitsuru; Ojio, Takeshi; Takeda, Yasuharu; Sakata, Yasushi; Yamamoto, Kazuhiro; Kaneko, Makoto

    This paper discusses a concept of a noninvasive sensing method that can estimate a left ventricular wall stiffness towards a medical diagnosis. Focusing on not only the strain of ventricular wall but also the displacements of epicardium during diastole of heart beat, we propose an index of ventricular wall stiffness based on a thick-walled cylinder model. Applying the proposed method to the echocardiography, we show statistical results where normal and HFpEF (Heart Failure with preserved Ejection Fraction) can be separated towards a medical diagnosis.

  15. Further reduction of near-wall resolution for wall-modeled LES

    Science.gov (United States)

    Marques, Alexandre; Wang, Qiqi; Larsson, Johan; Laskowski, Gregory; Bose, Sanjeeb

    2016-11-01

    One of the greatest challenges to the use of Large Eddy Simulations (LES) in engineering applications is the large number of grid points required near walls. To mitigate this issue, LES is often coupled with a model of the flow close to the wall, known as wall model. One feature common to most wall models is that the first few (about 3) grid points must be located below the inviscid log-layer (y / δ modeled LES may still require a large number of grid points, both in the wall-normal and span-wise directions. Because of these requirements, wall-modeled LES still is unfeasible in many applications. We present a new formulation of wall-modeled LES that is being developed to address this issue. In this formulation, LES is used to solve only for the features of the velocity field that can be adequately represented on the LES grid. The effects of the unresolved features are captured by imposing a balance of momentum integrated in the wall-normal direction. This integral momentum balance translates into a dynamic PDE defined on the walls, which is coupled to the LES equations. We discuss details of the new formulation and present results obtained in laminar and turbulent channel flows. This work was partially supported by the Center of Turbulence Research at Stanford University, and by the U.S. Department of Energy under Award Number DE-SC-0011089.

  16. Metastable magnetic domain walls in cylindrical nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, C.A.; MacLaren, D.A.; McVitie, S., E-mail: Stephen.McVitie@glasgow.ac.uk

    2015-05-01

    The stability of the asymmetric domain wall (ATDW) in soft magnetic cylindrical nanowires and nanotubes is investigated using micromagnetic simulations. Our calculated phase diagram shows that for cylindrical permalloy nanowires, the transverse domain wall (TDW) is the ground state for radii below 20 nm whilst the Bloch point wall (BPW) is favoured in thicker wires. The ATDW stabilises only as a metastable state but with energy close to that of the BPW. Characterisation of the DW spin structures reveals that the ATDW has a vortex-like surface spin state, in contrast to the divergent surface spins of the TDW. This results in lowering of surface charge above the critical radius. For both cylindrical nanotubes and nanowires we find that ATDWs only appear to exist as metastable static states and are particularly suppressed in nanotubes due to an increase in magnetostatic energy. - Highlights: • We simulate the micromagnetic structures of domain walls in cylindrical nanowires. • A phase diagram identifies ground and metastable states. • Asymmetric transverse walls are metastable in nanowires but suppressed in tubes. • Unrolling surface magnetisation aids visualisation of asymmetry and chirality. • We predict experimental discrimination based on magnetic charge distribution.

  17. Interactions between domain walls and spin currents

    Science.gov (United States)

    Klaui, M.; Laufenberg, M.; Backes, D.; Buhrer, W.; Rudiger, U.; Vila, L.; Vouille, C.; Faini, G.

    2006-03-01

    A promising novel approach for switching magnetic nanostructures is current-induced domain wall propagation (CIDP), where due to a spin torque effect, electrons transfer angular momentum to a head-to-head domain wall and thereby push it in the direction of the electron flow without any externally applied fields. This effect has been observed with a variety of techniques including MFM [1] and spin polarized scanning electron microscopy [2] to directly observe current-induced domain wall propagation in ferromagnetic nanostructures and magnetoresistance measurements to systematically probe the critical current densities as a function of the geometry [3]. The observed wall velocities and critical current densities, where wall motion sets in at room temperature, do not agree well with theoretical 0K calculations [4]. We have therefore measured the critical current densities as a function of the sample temperature. We find that the spin torque effect becomes more efficient at low temperatures, which could account for some of the observed discrepancies between the 300K experiment and the 0K simulation. [1] A. Yamaguchi et al., Phys. Rev. Lett. 92, 77205 (2004); [2] M. Klaui et al., PRL 95, 26601 (2005); [3] M. Klaui et al., PRL 94, 106601 (2005); [4] A. Thiaville et al., EPL 69, 990 (2005); G. Tatara et al., APL 86, 252509 (2005);

  18. New technologies for subsurface barrier wall construction

    Energy Technology Data Exchange (ETDEWEB)

    Mutch, R.D. Jr.; Ash, R.E. IV; Caputi, J.R. [Eckenfelder Inc., Mahwah, NJ (United States)

    1996-12-31

    New technologies for subsurface barrier wall construction are entering the marketplace at an unprecedented pace. Much of this innovation centers around construction of geomembrane barrier walls but also includes advancements in self-hardening slurries and in permeation grouts, involving such diverse materials as colloidal silica gel and montan wax emulsions. These advancements come at a time when subsurface barrier walls are cautiously emerging out of the technological closet. During much of the 1980s, barrier walls of any type were regarded in some quarters as crude and antiquated. It was correspondingly predicted that remediation would be dominated by emerging treatment technologies such as bioremediation, air sparging, and surfactant flushing. Notwithstanding the considerable successes of these emerging technologies, particularly bioremediation, the fact remains that a significant percentage of Superfund, RCRA-corrective action and other waste disposal sites present hydrogeologic, chemical, and waste matrix complexities that far exceed the capabilities of current treatment-based remedial technologies. Consequently, containment-based technologies such as subsurface barrier walls and caps are being recognized once again as irreplaceable components of practical remediation programs at many complex sites.

  19. Radiation induced osteosarcoma of the chest wall

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Tsutomu; Yuki, Yoshihiro; Oizumi, Hiroyuki; Iijima, Yoshiyuki; Fujishima, Tsukasa; Shimazaki, Yasuhisa [Yamagata Univ. (Japan). School of Medicine

    1996-11-01

    We report a successful resection of an osteosarcoma in the chest wall developed 25 years after irradiation. A 74-year-old woman was admitted to our hospital for her swelling in the left chest wall at August 24, 1995. At 49-year-old, she had undergone an operation and postoperative irradiation for left breast cancer. A computed tomography demonstrated a mass in the left chest wall that destructed the first rib, extending into the pleural space and invaded into the left common carotid and subclavian arteries. We planned a radical resection of the mass after repeated CT scannings, since it was histopathologically diagnosed as a chondrosarcoma and showed a rapid growth. The tumor was completely removed with radical transmediastinal forequarter amputation of the partial chest wall and total left upper extremity. The left common carotid artery was partially replaced with 6 mm EPTFE vascular prosthesis. The chest wall was reconstructed with Marlex-mesh prosthesis and a myocutaneous flap. She was discharged uneventfully and has not shown any evidence of recurrence. (author)

  20. Modes of deformation of walled cells.

    Science.gov (United States)

    Dumais, Jacques

    2013-11-01

    The bewildering morphological diversity found in cells is one of the starkest illustrations of life's ability to self-organize. Yet the morphogenetic mechanisms that produce the multifarious shapes of cells are still poorly understood. The shared similarities between the walled cells of prokaryotes, many protists, fungi, and plants make these groups particularly appealing to begin investigating how morphological diversity is generated at the cell level. In this review, I attempt a first classification of the different modes of surface deformation used by walled cells. Five modes of deformation were identified: inextensional bending, equi-area shear, elastic stretching, processive intussusception, and chemorheological growth. The two most restrictive modes-inextensional and equi-area deformations-are embodied in the exine of pollen grains and the wall-like pellicle of euglenoids, respectively. For these modes, it is possible to express the deformed geometry of the cell explicitly in terms of the undeformed geometry and other easily observable geometrical parameters. The greatest morphogenetic power is reached with the processive intussusception and chemorheological growth mechanisms that underlie the expansive growth of walled cells. A comparison of these two growth mechanisms suggests a possible way to tackle the complexity behind wall growth.

  1. Identification of Novel Cell Wall Components

    Energy Technology Data Exchange (ETDEWEB)

    Michelle Momany

    2009-10-26

    Our DOE Biosciences-funded work focused on the fungal cell wall and morphogenesis. We are especially interested in how new cell wall material is targeted to appropriate areas for polar (asymmetric) growth. Polar growth is the only way that filamentous fungi explore the environment to find suitable substrates to degrade. Work funded by this grant has resulted in a total of twenty peer-reviewed publications. In work funded by this grant, we identified nine Aspergillus nidulans temperature-sensitive (ts) mutants that fail to send out a germ tube and show a swollen cell phenotype at restrictive temperature, the swo mutants. In other organisms, a swollen cell phenotype is often associated with misdirected growth or weakened cell walls. Our work shows that several of the A. nidulans swo mutants have defects in the establishment and maintenance of polarity. Cloning of several swo genes by complementation also showed that secondary modification of proteins seems is important in polarity. We also investigated cell wall biosynthesis and branching based on leads in literature from other organisms and found that branching and nuclear division are tied and that the cell wall reorganizes during development. In our most recent work we have focused on gene expression during the shift from isotropic to polar growth. Surprisingly we found that genes previously thought to be involved only in spore formation are important in early vegetative growth as well.

  2. Comparison of Turbulent Heat-Transfer Results for Uniform Wall Heat Flux and Uniform Wall Temperature

    Science.gov (United States)

    Siegel, R.; Sparrow, E. M.

    1960-01-01

    The purpose of this note is to examine in a more precise way how the Nusselt numbers for turbulent heat transfer in both the fully developed and thermal entrance regions of a circular tube are affected by two different wall boundary conditions. The comparisons are made for: (a) Uniform wall temperature (UWT); and (b) uniform wall heat flux (UHF). Several papers which have been concerned with the turbulent thermal entrance region problem are given. 1 Although these analyses have all utilized an eigenvalue formulation for the thermal entrance region there were differences in the choices of eddy diffusivity expressions, velocity distributions, and methods for carrying out the numerical solutions. These differences were also found in the fully developed analyses. Hence when making a comparison of the analytical results for uniform wall temperature and uniform wall heat flux, it was not known if differences in the Nusselt numbers could be wholly attributed to the difference in wall boundary conditions, since all the analytical results were not obtained in a consistent way. To have results which could be directly compared, computations were carried out for the uniform wall temperature case, using the same eddy diffusivity, velocity distribution, and digital computer program employed for uniform wall heat flux. In addition, the previous work was extended to a lower Reynolds number range so that comparisons could be made over a wide range of both Reynolds and Prandtl numbers.

  3. Enhanced cold wall CVD reactor growth of horizontally aligned single-walled carbon nanotubes

    Science.gov (United States)

    Mu, Wei; Kwak, Eun-Hye; Chen, Bingan; Huang, Shirong; Edwards, Michael; Fu, Yifeng; Jeppson, Kjell; Teo, Kenneth; Jeong, Goo-Hwan; Liu, Johan

    2016-05-01

    HASynthesis of horizontally-aligned single-walled carbon nanotubes (HA-SWCNTs) by chemical vapor deposition (CVD) directly on quartz seems very promising for the fabrication of future nanoelectronic devices. In comparison to hot-wall CVD, synthesis of HA-SWCNTs in a cold-wall CVD chamber not only means shorter heating, cooling and growth periods, but also prevents contamination of the chamber. However, since most synthesis of HA-SWCNTs is performed in hot-wall reactors, adapting this well-established process to a cold-wall chamber becomes extremely crucial. Here, in order to transfer the CVD growth technology from a hot-wall to a cold-wall chamber, a systematic investigation has been conducted to determine the influence of process parameters on the HA-SWCNT's growth. For two reasons, the cold-wall CVD chamber was upgraded with a top heater to complement the bottom substrate heater; the first reason to maintain a more uniform temperature profile during HA-SWCNTs growth, and the second reason to preheat the precursor gas flow before projecting it onto the catalyst. Our results show that the addition of a top heater had a significant effect on the synthesis. Characterization of the CNTs shows that the average density of HA-SWCNTs is around 1 - 2 tubes/ μm with high growth quality as shown by Raman analysis. [Figure not available: see fulltext.

  4. DISTRIBUTION OF ACTIVE EARTH PRESSURE OF RETAINING WALL WITH WALL MOVEMENT OF ROTATION ABOUT TOP

    Institute of Scientific and Technical Information of China (English)

    王元战; 唐照评; 郑斌

    2004-01-01

    Based on the Coulomb' s theory that the earth pressure against the back of a retaining wall is due to the thrust exerted by the sliding wedge of soil from the back of the wall to a plane which passes through the bottom edge of the wall and has an inclination equal to the angle of θ, the theoretical answers to the unit earth pressure, the resultant earth pressure and the point of application of the resultant earth pressure on a retaining wall were obtained for the wall movement mode of rotation about top. The comparisons were made among the formula presented here, the formula for the wall movement mode of translation,the Coulomb' s formula and some experimental observations. It is demonstrated that the magnitudes of the resultant earth pressures for the wall movement mode of rotation about top is equal to that determined by the formula for the wall movement mode of translation and the Coulomb' s theory. But the distribution of the earth pressure and the points of application of the resultant earth pressures have significant difference.

  5. Cell wall oxalate oxidase modifies the ferulate metabolism in cell walls of wheat shoots.

    Science.gov (United States)

    Wakabayashi, Kazuyuki; Soga, Kouichi; Hoson, Takayuki

    2011-11-01

    Oxalate oxidase (OXO) utilizes oxalate to generate hydrogen peroxide, and thereby acts as a source of hydrogen peroxide. The present study was carried out to investigate whether apoplastic OXO modifies the metabolism of cell wall-bound ferulates in wheat seedlings. Histochemical staining of OXO showed that cell walls were strongly stained, indicating the presence of OXO activity in shoot walls. When native cell walls prepared from shoots were incubated with oxalate or hydrogen peroxide, the levels of ester-linked diferulic acid (DFA) isomers were significantly increased. On the other hand, the level of ester-linked ferulic acid (FA) was substantially decreased. The decrease in FA level was accounted neither by the increases in DFA levels nor by the release of FA from cell walls during the incubation. After the extraction of ester-linked ferulates, considerable ultraviolet absorption remained in the hemicellulosic and cellulose fractions, which was increased by the treatment with oxalate or hydrogen peroxide. Therefore, a part of FA esters may form tight linkages within cell wall architecture. These results suggest that cell wall OXO is capable of modifying the metabolism of ester-linked ferulates in cell walls of wheat shoots by promoting the peroxidase action via supply of hydrogen peroxide.

  6. Radial Corrugations of Multi-Walled Carbon Nanotubes Driven by Inter-Wall Nonbonding Interactions.

    Science.gov (United States)

    Huang, Xu; Liang, Wentao; Zhang, Sulin

    2011-12-01

    We perform large-scale quasi-continuum simulations to determine the stable cross-sectional configurations of free-standing multi-walled carbon nanotubes (MWCNTs). We show that at an inter-wall spacing larger than the equilibrium distance set by the inter-wall van der Waals (vdW) interactions, the initial circular cross-sections of the MWCNTs are transformed into symmetric polygonal shapes or asymmetric water-drop-like shapes. Our simulations also show that removing several innermost walls causes even more drastic cross-sectional polygonization of the MWCNTs. The predicted cross-sectional configurations agree with prior experimental observations. We attribute the radial corrugations to the compressive stresses induced by the excessive inter-wall vdW energy release of the MWCNTs. The stable cross-sectional configurations provide fundamental guidance to the design of single MWCNT-based devices and shed lights on the mechanical control of electrical properties.

  7. Radial Corrugations of Multi-Walled Carbon Nanotubes Driven by Inter-Wall Nonbonding Interactions

    Directory of Open Access Journals (Sweden)

    Huang Xu

    2011-01-01

    Full Text Available Abstract We perform large-scale quasi-continuum simulations to determine the stable cross-sectional configurations of free-standing multi-walled carbon nanotubes (MWCNTs. We show that at an inter-wall spacing larger than the equilibrium distance set by the inter-wall van der Waals (vdW interactions, the initial circular cross-sections of the MWCNTs are transformed into symmetric polygonal shapes or asymmetric water-drop-like shapes. Our simulations also show that removing several innermost walls causes even more drastic cross-sectional polygonization of the MWCNTs. The predicted cross-sectional configurations agree with prior experimental observations. We attribute the radial corrugations to the compressive stresses induced by the excessive inter-wall vdW energy release of the MWCNTs. The stable cross-sectional configurations provide fundamental guidance to the design of single MWCNT-based devices and shed lights on the mechanical control of electrical properties.

  8. Prephonatory chest wall posturing in stutterers.

    Science.gov (United States)

    Baken, R J; McManus, D A; Cavallo, S A

    1983-09-01

    The possibility that prephonatory chest wall posturing is abnormal in stutterers was explored by observing rib cage and abdominal hemicircumference changes during the interval between the presentation of a stimulus and the production of/alpha/by a group of stutterers (N = 5). It was found that the patterns of chest wall adjustment for phonation were qualitatively identical in the stutterers and in a comparable group of normal men studied previously. There was, however, a significant difference in the way in which lung volume changed during the execution of the chest wall adjustment. This was considered to be indicative of delayed glottal closure among the stutterers rather than representative of a primary ventilatory disturbance.

  9. Imaging of Chest Wall Lesions in Children

    Directory of Open Access Journals (Sweden)

    A. Hekmatnia

    2008-01-01

    Full Text Available Chest wall lesions in childhood include a wide range of pathologies; Benign lesions include lipoma, neurofibroma, lymphangioma, hemangioma, and mesenchymal hamartoma."nMalignant lesions include Neuroblastoma, Rhabdo-myosarcoma, Ewing sarcoma, and Askin tumor."nSystemic diseases such as leukemia, lymphoma, Langerhans cell histiocytosis, and also infections such as tuberculosis, and actinomycosis may also cause chest wall lesions."nThe imaging characteristics of these lesions are re-viewed, but only a minority of the lesions shows diagnostic imaging features, and most of lesions re-quire biopsy and histopathological examination for "ndefinitive diagnosis."nThe role of different modalities is discussed with an emphasis on magnetic resonance imaging for demonstrating lesion morphology and local spread. Computed tomography and neuclear medicine being used mainly to assess remote disease."nIn this lecture, we discuss about imaging of chest wall lesions in children.

  10. Sequential buckling of an elastic wall

    Science.gov (United States)

    Bico, Jose; Bense, Hadrien; Keiser, Ludovic; Roman, Benoit; Melo, Francisco; Abkarian, Manouk

    A beam under quasistatic compression classically buckles beyond a critical threshold. In the case of a free beam, the lowest buckling mode is selected. We investigate the case of a long ``wall'' grounded of a compliant base and compressed in the axial compression. In the case of a wall of slender rectangular cross section, the selected buckling mode adopts a nearly fixed wavelength proportional to the height of the wall. Higher compressive loads only increase the amplitude of the buckle. However if the cross section has a sharp shape (such as an Eiffel tower profile), we observe successive buckling modes of increasing wavelength. We interpret this unusual evolution in terms of scaling arguments. At small scales, this variable periodicity might be used to develop tunable optical devices. We thank ECOS C12E07, CNRS-CONICYT, and Fondecyt Grant No. N1130922 for partially funding this work.

  11. Anomalous feedback and negative domain wall resistance

    Science.gov (United States)

    Cheng, Ran; Zhu, Jian-Gang; Xiao, Di

    2016-11-01

    Magnetic induction can be regarded as a negative feedback effect, where the motive-force opposes the change of magnetic flux that generates the motive-force. In artificial electromagnetics emerging from spintronics, however, this is not necessarily the case. By studying the current-induced domain wall dynamics in a cylindrical nanowire, we show that the spin motive-force exerting on electrons can either oppose or support the applied current that drives the domain wall. The switching into the anomalous feedback regime occurs when the strength of the dissipative torque β is about twice the value of the Gilbert damping constant α. The anomalous feedback manifests as a negative domain wall resistance, which has an analogy with the water turbine.

  12. Solitary Plasmacytoma of the Chest Wall

    Directory of Open Access Journals (Sweden)

    Servet Kayhan

    2014-03-01

    Full Text Available A previously healthy 55-year-old man with right sided lateral chest pain admitted to clinic. It was found a solid and painful mass at the right 4th rib in physical examination. Chest X-ray and thoracic computarized tomography showed an opacity measured 60x33 mm within the right chest wall destructing the 4th rib. Needle aspiration was performed from tumor and cytologic examination showed atypic plasma cell infiltration. The patient was scheduled for a chest wall resection and reconstructive surgery. Examination of a permanent section showed that the chest wall tumor was solitary plasmacytoma. There was no evidence of multiple myeloma recurrence after two years from the operation.

  13. INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Michael Arney, Ph.D.

    2002-12-31

    The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

  14. Bubble Impact with a Solid Wall

    Science.gov (United States)

    Garg, Vishrut; Thete, Sumeet; Basaran, Osman

    2016-11-01

    In diverse natural and industrial processes, and in particular in process equipment widely used in oil and gas production, bubbles and drops that are immersed in a continuous liquid phase frequently collide with solid walls. In this talk, the impact with a solid wall of a gas bubble that is surrounded by a liquid that is either a Newtonian or a non-Newtonian fluid is analyzed by numerical simulation. Special attention is paid to the thin film that forms between the approaching bubble and the solid wall. Flow regimes that arise as the film thickness decreases are scrutinized and rationalized by comparison of the computational predictions to well-known and new analytical results from lubrication theory based thin film literature. Finally, flow transitions that occur as the lubrication theory breaks down and inertia becomes significant are investigated.

  15. Parallel large data visualization with display walls

    Science.gov (United States)

    Scheidegger, Luiz; Vo, Huy T.; Krüger, Jens; Silva, Cláudio T.; Comba, João L. D.

    2012-01-01

    While there exist popular software tools that leverage the power of arrays of tiled high resolution displays, they usually require either the use of a particular API or significant programming effort to be properly configured. We present PVW (Parallel Visualization using display Walls), a framework that uses display walls for scientific visualization, requiring minimum labor in setup, programming and configuration. PVW works as a plug-in to pipeline-based visualization software, and allows users to migrate existing visualizations designed for a single-workstation, single-display setup to a large tiled display running on a distributed machine. Our framework is also extensible, allowing different APIs and algorithms to be made display wall-aware with minimum effort.

  16. Energy conserving effects of dividing wall column☆

    Institute of Scientific and Technical Information of China (English)

    Jing Fang; Hanmei Zhao; Jianchao Qi; Chunli Li; Junjie Qi; Jiajia Guo

    2015-01-01

    The energy-conserving performance of dividing wal column (DWC) is discussed in this paper. The heat transfer through the dividing wall is considered and the results are compared with that of common heat insulation dividing wall column (HIDWC). Based on the thermodynamic analysis of heat transfer dividing wall column (HTDWC) and HIDWC, both computer simulation and experiments are employed to analyze the energy-conserving situation. Mixtures of n-hexane, n-heptane and n-octane are chosen as the example for separation. The results show that the energy consumption of HTDWC is 50.3%less than that of conventional distillation column, while it is 46.4% less than that of HIDWC. It indicates that DWC is efficient on separating three-component mixtures and HTDWC can save more energy than HIDWC. Thus it is necessary to consider the heat transfer while applying DWC to industry.

  17. Retrofitting Masonry Walls with Carbon Mesh

    Directory of Open Access Journals (Sweden)

    Patrick Bischof

    2014-01-01

    Full Text Available Static-cyclic shear load tests and tensile tests on retrofitted masonry walls were conducted at UAS Fribourg for an evaluation of the newly developed retrofitting system, the S&P ARMO-System. This retrofitting system consists of a composite of carbon mesh embedded in a specially adapted high quality spray mortar. It can be applied with established construction techniques using traditional construction materials. The experimental study has shown that masonry walls reinforced by this retrofitting system reach a similar strength and a higher ductility than retrofits by means of bonded carbon fiber reinforced polymer sheets. Hence, the retrofitting system using carbon fiber meshes embedded in a high quality mortar constitutes a good option for static or seismic retrofits or reinforcements for masonry walls. However, the experimental studies also revealed that the mechanical anchorage of carbon mesh may be delicate depending on its design.

  18. Untethered photonic sensor for wall pressure measurement.

    Science.gov (United States)

    Manzo, Maurizio; Ioppolo, Tindaro

    2015-05-15

    In this Letter, we study a novel untethered photonic wall pressure sensor that uses as sensing element a dome-shaped micro-scale laser. Since the sensor does not require any optical or electrical cabling, it allows measurements where cabling tends to be problematic. The micro-laser is made by a mixture of Trimethylolpropane Tri(3-mercaptopropionate), commercial name THIOCURE and Polyethylene (glycol) Diacrylate (PEGDA) mixed with a solution of rhodamine 6G. Two different volume ratios between the THIOCURE and the PEGDA are studied, since different ratios lead to different mechanical properties. In addition, two different sensor configurations are presented: (i) sensor coupled to a membrane, that allows differential wall pressure measurement and (ii) sensor without membrane that allows absolute wall pressure measurement. The sensitivity plots are presented in the paper for both sensor configurations and polymer ratios.

  19. "Steiner trees" between cell walls of sisal

    Institute of Scientific and Technical Information of China (English)

    LI GuanShi; YIN YaJun; LI Yan; ZHONG Zheng

    2009-01-01

    Through careful analysis on the cross-section of sisal fibers,it is found that the middle lamellae between the cell walls have clear geometric characteristics:between the cell walls of three neighboring cells,the middle lamellae form a three-way junction with 120°symmetry. If the neighboring three-way junctions are connected,a network of Steiner tree with angular symmetry and topological invariability is formed. If more and more Steiner trees are connected,a network of Steiner rings is generated. In another word,idealized cell walls and the middle lamellae are dominated by the Steiner geometry. This geometry not only depicts the geometric symmetry,the topological invariability and minimal property of the middle lamellae,but also controls the mechanics of sisal fibers.

  20. Enzymatic Modification of Plant Cell Wall Polysaccharides

    DEFF Research Database (Denmark)

    Øbro, Jens; Hayashi, Takahisa; Mikkelsen, Jørn Dalgaard

    2011-01-01

    for sustainable processes that replace chemical treatments with white biotechnology. Plants can contribute significantly to this sustainable process by producing plant or microbialenzymes in planta that are necessary for plant cell wall modification or total degradation. This will give rise to superior food......Plant cell walls are intricate structures with remarkable properties, widely used in almost every aspect of our life. Cell walls consist largely of complex polysaccharides and there is often a need for chemical and biochemical processing before industrial use. There is an increasing demand...... fibres, hydrocolloids, paper,textile, animal feeds or biofuels. Classical microbial-based fermentation systems could in the future face serious competition from plant-based expression systems for enzyme production. Plant expressed enzymes can either be targeted to specific cellular compartments...

  1. Turbine airfoil with a compliant outer wall

    Science.gov (United States)

    Campbell, Christian X [Oviedo, FL; Morrison, Jay A [Oviedo, FL

    2012-04-03

    A turbine airfoil usable in a turbine engine with a cooling system and a compliant dual wall configuration configured to enable thermal expansion between inner and outer layers while eliminating stress formation in the outer layer is disclosed. The compliant dual wall configuration may be formed a dual wall formed from inner and outer layers separated by a support structure. The outer layer may be a compliant layer configured such that the outer layer may thermally expand and thereby reduce the stress within the outer layer. The outer layer may be formed from a nonplanar surface configured to thermally expand. In another embodiment, the outer layer may be planar and include a plurality of slots enabling unrestricted thermal expansion in a direction aligned with the outer layer.

  2. [Chest wall mesenchymal hamartoma: a case report].

    Science.gov (United States)

    Morales, Olga Lucía; Valencia, María de la Luz; Gómez, Carolina; Pérez, María del Pilar; Sanín, Emilio; Vásquez, Luz Marina

    2010-01-01

    Chest wall mesenchymal hamartoma is an extremely rare benign tumor. Approximately 80 cases have been reported in the literature. Most tumors are manifested at birth with a painless palpable mass of the chest wall, usually unilateral. Respiratory symptoms result from extrinsic compression of the pulmonary parenchyma, and the severity of the symptoms will depend on the size and location of the lesion. Imaging features are characteristic, but definitive diagnosis is histological. Herein, a case is described of a four month old infant with diagnosis of chest wall mesenchymal hamartoma, manifested at birth. Different treatment options are described, including expectations from tumor management, the possibility of spontaneous regression, and the morbidity associated with the surgical option.

  3. Enzymatic Modification of Plant Cell Wall Polysaccharides

    DEFF Research Database (Denmark)

    Øbro, Jens; Hayashi, Takahisa; Mikkelsen, Jørn Dalgaard

    2011-01-01

    fibres, hydrocolloids, paper,textile, animal feeds or biofuels. Classical microbial-based fermentation systems could in the future face serious competition from plant-based expression systems for enzyme production. Plant expressed enzymes can either be targeted to specific cellular compartments......Plant cell walls are intricate structures with remarkable properties, widely used in almost every aspect of our life. Cell walls consist largely of complex polysaccharides and there is often a need for chemical and biochemical processing before industrial use. There is an increasing demand...... for sustainable processes that replace chemical treatments with white biotechnology. Plants can contribute significantly to this sustainable process by producing plant or microbialenzymes in planta that are necessary for plant cell wall modification or total degradation. This will give rise to superior food...

  4. Arrangement of peptidoglycan in the cell wall of Staphylococcus spp.

    OpenAIRE

    Amako, K.; Umeda, A; Murata, K

    1982-01-01

    The arrangement of peptidoglycan in the cell wall of Staphylococcus was observed with the newly developed freeze-fracture technique, using n-octanol instead of water as the freezing medium. The replica of the trichloroacetic acid-extracted cell wall (TCA-wall) showed two areas. One of them has a concentric circular structure, a characteristic surface structure of the staphylococcal cell wall, and the other showed an irregular and rough surface. The chemical analysis of the wall revealed that ...

  5. Analysis of flat slab building with and without shear wall

    Directory of Open Access Journals (Sweden)

    Dhanaji R. Chavan

    2016-10-01

    Full Text Available The analytical research carried out to study the behaviour flat slab building with and without shear wall reported in the present work. For analysis 15 storied flat slab building is analyzed for seismic behaviour. Response spectrum method is used for analysis considering different shear wall positions using ETABS software. Five different positions of shear wall were studied for analysis. From this analysis shear wall at core having square shape is most suitable case for construction of shear wall.

  6. Xyloglucan endotransglucosylase and cell wall extensibility.

    Science.gov (United States)

    Miedes, E; Zarra, I; Hoson, T; Herbers, K; Sonnewald, U; Lorences, E P

    2011-02-15

    Transgenic tomato hypocotyls with altered levels of an XTH gene were used to study how XET activity could affect the hypocotyl growth and cell wall extensibility. Transgenic hypocotyls showed significant over-expression (line 13) or co-suppression (line 33) of the SlXTH1 in comparison with the wild type, with these results being correlated with the results on specific soluble XET activity, suggesting that SlXTH1 translates mainly for a soluble XET isoenzyme. A relationship between XET activity and cell wall extensibility was found, and the highest total extensibility was located in the apical hypocotyl segment of the over-expressing SlXTH1 line, where the XET-specific activity and hypocotyl growth were also highest compared with the wild line. Also, in the co-suppression SlXTH1 line, total extensibility values were lower than in the wild type line. The study of linkages between cell wall polysaccharides by FTIR showed that hypocotyls over-expressing SlXTH1 and having a higher XET-specific activity, were grouped away from the wild line, indicating that the linkages between pectins and between cellulose and xyloglucans might differ. These results suggested that the action of the increased XET activity in the transgenic line could be responsible for the cell wall structural changes, and therefore, alter the cell wall extensibility. On the other hand, results on xyloglucan oligosaccharides composition of the xyloglucan by MALDI TOF-MS showed no differences between lines, indicating that the xyloglucan structure was not affected by the XET action. These results provide evidences that XTHs from group I are involved mainly in the restructuring of the cell wall during growth and development, but they are not the limiting factor for plant growth.

  7. Color doppler sonography in thickened gallbladder wall

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Suk; Choi, Seok Jin; Seo, Chang Hae; Eun, Choong Ki [Inje Univ. College of Medicine, Kimhae (Korea, Republic of)

    1996-11-01

    The thickening of the gallbladder wall is a valuable finding for the diagnosis of cholecystitis, but may be seen in non-cholecystic disease as well as in acute or chronic cholecystitis. The purpose of this study is to determine the value of color Doppler sonography in differentiating the causes of thickened gallbladder wall. Ninety eight patients with thickened gallbladder wall(more than 3mm) which was not due to gallbladder cancer were prospectively evaluated with color Doppler sonography. Sixty-six cases, confirmed by pathologic reports and clinical records, were analyzed for correlation between thickened gallbladder wall and color flow signal according to the underlying causes. Of the 66 patients, 28 cases were cholecystitis and 38 cases had non-cholecystic causes such as liver cirrhosis, ascites, hepatitis, pancreatitis, renal failure, and hypoalbuminemia. Of the 28 patients with cholecystitis(12 acute, 16 chronic), 23(82%) had color Doppler flow signals in the thickened gallbladder wall. Of the 38 patients with non-cholecystic causes, eight(21%) had color Doppler flow signals. There was a statistically significant difference of color Doppler flow signals between the cholecystitis and non-cholecystic groups(p=0.0001). No significant difference of color Doppler flow signals was found between cases of acute and chronic cholecystitis. Of the 23 patients with color Doppler flow signals in 28 cases of cholecystitis, 18(78.3%) showed a linear pattern and five(21.7%) showed a spotty pattern. Of the eight patients with color Doppler flow signals in the 38 non-cholecystic cases, four(50%) showed a linear pattern and four(50%) showed a spotty pattern. In cholecystitis, a linear color Doppler flow signal pattern is a much more frequent finding than a spotty pattern. Color Doppler sonography is a useful and adequate method for determining whether a thickened gallbladder wall is the result of cholecystitis or has non-cholecystic causes.

  8. FRP strengthening of RC walls with openings

    DEFF Research Database (Denmark)

    Hansen, Christian Skodborg; Sas, Gabriel; Täljsten, Björn

    2009-01-01

    Strengthening reinforced concrete (RC) walls with openings using fibre reinforced polymers (FRP) has been experimentally proven to be a viable rehabilitation method. However, very few theoretical investigations are reported. In this paper two methods of analysis are presented. Since openings vary...... in size, the analysis of a strengthened wall can be divided into frame idealization method for large openings, and combined disk and frame analysis for smaller openings. The first method provides an easy to use tool in practical engineering, where the latter describes the principles of a ductile...

  9. Plasticity Approach to HSC Shear Wall Design

    DEFF Research Database (Denmark)

    Liu, Lunying; Nielsen, Mogens Peter

    1998-01-01

    The paper describes a simple theory for determining the ultimate strength of shear walls. It is based on application of the theory of perfectly plastic materials. When applied to concrete the theoretical solutions must be modified by inserting into the solutions a reduced compressive strength...... to 140 MPa and reinforcement yield strengths up to 1420 MPa. The work was carried out as a Ph.D. study by the first author, the second author supervising the study.Keywords: shear wall, plasticity, strut and tie, load-carrying capacity, concrete, reinforcement....

  10. Soft-wall modelling of meson spectra

    CERN Document Server

    Afonin, S S

    2016-01-01

    The holographic methods inspired by the gauge/gravity correspondence from string theory have been actively applied to the hadron spectroscopy in the last eleven years. Within the phenomenological bottom-up approach, the linear Regge-like trajectories for light mesons are naturally reproduced in the so-called "Soft-wall" holographic models. I will give a very short review of the underlying ideas and technical aspects related to the meson spectroscopy. A generalization of soft-wall description of Regge trajectories to arbitrary intercept is proposed. The problem of incorporation of the chiral symmetry breaking is discussed.

  11. Multigrid Algorithms for Domain-Wall Fermions

    CERN Document Server

    Cohen, Saul D; Clark, M A; Osborn, J C

    2012-01-01

    We describe an adaptive multigrid algorithm for solving inverses of the domain-wall fermion operator. Our multigrid algorithm uses an adaptive projection of near-null vectors of the domain-wall operator onto coarser four-dimensional lattices. This extension of multigrid techniques to a chiral fermion action will greatly reduce overall computation cost, and the elimination of the fifth dimension in the coarse space reduces the relative cost of using chiral fermions compared to discarding this symmetry. We demonstrate near-elimination of critical slowing as the quark mass is reduced and small volume dependence, which may be suppressed by taking advantage of the recursive nature of the algorithm.

  12. Recording Rapidly Changing Cylinder-wall Temperatures

    Science.gov (United States)

    Meier, Adolph

    1942-01-01

    The present report deals with the design and testing of a measuring plug suggested by H. Pfriem for recording quasi-stationary cylinder wall temperatures. The new device is a resistance thermometer, the temperature-susceptible part of which consists of a gold coating applied by evaporation under high vacuum and electrolytically strengthened. After overcoming initial difficulties, calibration of plugs up to and beyond 400 degrees C was possible. The measurements were made on high-speed internal combustion engines. The increasing effect of carbon deposit at the wall surface with increasing operating period is indicated by means of charts.

  13. Breakwaters with Vertical and Inclined Concrete Walls

    DEFF Research Database (Denmark)

    Burcharth, Hans Falk

    Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects in the de......Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects...

  14. Vibrotactile Vest and The Humming Wall

    DEFF Research Database (Denmark)

    Morrison, Ann; Manresa-Yee, Cristina; Knoche, Hendrik

    2015-01-01

    Vibrotactile information can be used to elicit sensations and encourage particular user body movements. We designed a vibrotactile vest with physiological monitoring that interacts with a vibroacoustic urban environment, The Humming Wall. In this paper, we describe the first field trial with the ......Vibrotactile information can be used to elicit sensations and encourage particular user body movements. We designed a vibrotactile vest with physiological monitoring that interacts with a vibroacoustic urban environment, The Humming Wall. In this paper, we describe the first field trial...

  15. Chest wall abscess due to Prevotella bivia

    Institute of Scientific and Technical Information of China (English)

    Gwo-jong HSU; Cheng-ren CHEN; Mei-chu LAI; Shi-ping LUH

    2009-01-01

    Prevotella bivia is associated with pelvic inflammatory disease. A 77-year-old man developed a rapidly growing chest wall abscess due to P. Bivia within days. He underwent surgical resection of the infected area; his postoperative course was un-eventful. This is the first case of chest wall abscess due to P. Bivia infection. Its correct diagnosis cannot be underestimated be-cause fulminam infections can occur in aged or immunocompromised patients if treated incorrectly. Prompt, appropriate surgical management, and antibiotic therapy affect treatment outcome.

  16. Autolysis and extension of isolated walls from growing cucumber hypocotyls.

    Science.gov (United States)

    Cosgrove, D J; Durachko, D M

    1994-11-01

    Walls isolated from cucumber hypocotyls retain autolytic activities and the ability to extend when placed under the appropriate conditions. To test whether autolysis and extension are related, we treated the walls in various ways to enhance or inhibit long-term wall extension ('creep') and measured autolysis as release of various saccharides from the wall. Except for some non-specific inhibitors of enzymatic activity, we found no correlation between wall extension and wall autolysis. Most notably, autolysis and extension differed strongly in their pH dependence. We also found that exogenous cellulases and pectinases enhanced extension in native walls, but when applied to walls previously inactivated with heat or protease these enzymes caused breakage without sustained extension. In contrast, pretreatment of walls with pectinase or cellulase, followed by boiling in methanol to inactivate the enzymes, resulted in walls with much stronger expansin-mediated extension responses. Crude protein preparations from the digestive tracts of snails enhanced extension of both native and inactivated walls, and these preparations contained expansin-like proteins (assessed by Western blotting). Our results indicate that the extension of isolated cucumber walls does not depend directly on the activity of endogenous wall-bound autolytic enzymes. The results with exogenous enzymes suggest that the hydrolysis of matrix polysaccharides may not induce wall creep by itself, but may act synergistically with expansins to enhance wall extension.

  17. Effects of wall condition on flow distributions in arterial modeling: comparison of rigid, dynamic, and compliant walls

    Energy Technology Data Exchange (ETDEWEB)

    He, Fan [Beijing University of Civil Engineering and Architecture, Beijing (China); Hua, Lu; Gao, Li jian [Chinese Academy of Medical Sciences and Peking Union Medical College, Beijing (China)

    2016-03-15

    Blood flow distributions were evaluated using various computational strategies. Three commonly used wall conditions in arterial modeling were employed, namely rigid, dynamic and compliant walls. The results show that the velocity distributions are similar under rigid and dynamic walls, developing into the Poiseuille flow, but they are blunt under compliant walls. The peak pressure under rigid walls is highest, but the model of dynamic walls has a good approximation of pressure against the model of compliant walls. The results indicate that a model of compliant walls appears to be a computationally and reasonably accurate approximation of blood velocity distributions compared with the analysis under rigid or dynamic walls. Introducing fluid-structure interaction into arterial modeling is necessary to ensure reliable results and information. However, a model of dynamic walls seems to be a computationally inexpensive yet reasonably accurate approximation for pressure.

  18. A Typical Magnetohydrodynamic Flow of a Viscous Incompressible Fluid Between a Parallel Flat Wall and a Wavy Wall : Constant Suction Through the Former Wall

    Directory of Open Access Journals (Sweden)

    S. N. Maitra

    1986-01-01

    Full Text Available A magnetohydrodynamic flow of a viscous, incompressible and slightly conducting fluid is developed between a parallel flat wall and a wavy wall whereas at the same time fluid is continuously sucked through the flat wall with a constant suction velocity. The velocity and temperature distribution are determined alongwith the pressure gradient and co-efficient of skin friction.

  19. Shear localization and effective wall friction in a wall bounded granular flow

    Directory of Open Access Journals (Sweden)

    Artoni Riccardo

    2017-01-01

    Full Text Available In this work, granular flow rheology is investigated by means of discrete numerical simulations of a torsional, cylindrical shear cell. Firstly, we focus on azimuthal velocity profiles and study the effect of (i the confining pressure, (ii the particle-wall friction coefficient, (iii the rotating velocity of the bottom wall and (iv the cell diameter. For small cell diameters, azimuthal velocity profiles are nearly auto-similar, i.e. they are almost linear with the radial coordinate. Different strain localization regimes are observed : shear can be localized at the bottom, at the top of the shear cell, or it can be even quite distributed. This behavior originates from the competition between dissipation at the sidewalls and dissipation in the bulk of the system. Then we study the effective friction at the cylindrical wall, and point out the strong link between wall friction, slip and fluctuations of forces and velocities. Even if the system is globally below the sliding threshold, force fluctuations trigger slip events, leading to a nonzero wall slip velocity and an effective wall friction coefficient different from the particle-wall one. A scaling law was found linking slip velocity, granular temperature in the main flow direction and effective friction. Our results suggest that fluctuations are an important ingredient for theories aiming to capture the interface rheology of granular materials.

  20. Connective tissue alteration in abdominal wall hernia

    DEFF Research Database (Denmark)

    Henriksen, N A; Yadete, D H; Sørensen, Lars Tue

    2011-01-01

    The aetiology and pathogenesis of abdominal wall hernia formation is complex. Optimal treatment of hernias depends on a full understanding of the pathophysiological mechanisms involved in their formation. The aim of this study was to review the literature on specific collagen alterations in abdom...

  1. Tearing Down the Wall: Literature and Science.

    Science.gov (United States)

    Westcott, Warren B.; Spell, J. Everett

    1999-01-01

    Suggests English teachers might draw from authors such as Carl Sagan, Arthur C. Clarke, Mary Shelly and others: (1) to knock down the walls that separate science and literature; (2) to show their interrelationship; and (3) to instill enthusiasm for the study of both. (NH)

  2. Wall effects on a rotating sphere

    NARCIS (Netherlands)

    Liu, Qianlong; Prosperetti, Andrea

    2010-01-01

    The flow induced by a spherical particle spinning in the presence of no-slip planar boundaries is studied by numerical means. In addition to the reference case of an infinite fluid, the situations considered include a sphere rotating near one or two infinite plane walls parallel or perpendicular to

  3. Microanalysis of Plant Cell Wall Polysaccharides

    NARCIS (Netherlands)

    Obel, N.; Erben, V.; Schwarz, T.; Kühnel, S.; Fodor, A.; Pauly, M.

    2009-01-01

    Oligosaccharide Mass Profiling (OLIMP) allows a fast and sensitive assessment of cell wall polymer structure when coupled with Matrix Assisted Laser Desorption Ionisation Time Of Flight Mass Spectrometry (MALDI-TOF MS). The short time required for sample preparation and analysis makes possible the s

  4. Subcooled Boiling Near a Heated Wall

    Energy Technology Data Exchange (ETDEWEB)

    T.A. Trabold; C.C. Maneri; P.F. Vassallo; D.M. Considine

    2000-10-27

    Experimental measurements of void fraction, bubble frequency, and velocity are obtained in subcooled R-134a flowing over a heated flat plate near an unheated wall and compared to analytical predictions. The measurements were obtained for a fixed system pressure and mass flow rate (P = 2.4 MPa and w = 106 kg/hr) at various inlet liquid temperatures. During the experiments, electrical power was applied at a constant rate to one side of the test section. The local void fraction data, acquired with a hot-film anemometer probe, showed the existence of a significant peak near the heated wall and a smaller secondary peak near the unheated wall for the larger inlet subcoolings. Local vapor velocity data, taken with the hot-film probe and a laser Doppler velocimeter, showed broad maxima near the centerline between the heated and unheated plates. Significant temperature gradients near the heated wall were observed for large inlet subcooling. Bubble size data, inferred from measurements of void fraction, bubble frequency and vapor velocity, when combined with the measured bubble chord length distributions illustrate the transition from pure three dimensional spherical to two-dimensional planar bubble flow, the latter being initiated when the bubbles fill the gap between the plates. These various two-phase flow measurements were used for development of a multidimensional, four-field calculational method; comparisons of the data to the calculations show reasonable agreement.

  5. Cell Wall Diversity in Forage Maize

    NARCIS (Netherlands)

    Torres, A.F.; Noordam-Boot, C.M.M.; Dolstra, Oene; Weijde, van der Tim; Combes, Eliette; Dufour, Philippe; Vlaswinkel, Louis; Visser, R.G.F.; Trindade, L.M.

    2015-01-01

    Genetic studies are ideal platforms for assessing the extent of genetic diversity, inferring the genetic architecture, and evaluating complex trait interrelations for cell wall compositional and bioconversion traits relevant to bioenergy applications. Through the characterization of a forage maiz

  6. Outer Rail for Wall Plate Covering

    DEFF Research Database (Denmark)

    2013-01-01

    The outer rail retains two lateral screw webs of an intermediate rail to construct a base for wall plate covering. Two retention devices are disposed oppositely on respective inner sides of each retention web for retaining a respective screw web of the intermediate rail. Each retention device...

  7. The APWL Wideband Wall Current Monitor

    CERN Document Server

    Bohl, T

    2009-01-01

    A wideband wall current monitor was designed for use in LHC. The pick-up, named APWL, is of the coaxial type. Its main mechanical and electrical parameters are described and evaluated. The measured pick-up response is used to calculate the expected bunch profile obtainable with a pick-up of this type.

  8. Compactified webs and domain wall partition functions

    Energy Technology Data Exchange (ETDEWEB)

    Shabbir, Khurram [Government College University, Department of Mathematics, Lahore (Pakistan)

    2017-04-15

    In this paper we use the topological vertex formalism to calculate a generalization of the ''domain wall'' partition function of M-strings. This generalization allows calculation of partition function of certain compactified webs using a simple gluing algorithm similar to M-strings case. (orig.)

  9. The Discrete Site Sticky Wall Model.

    Science.gov (United States)

    1986-05-27

    TECHNICAL REPORT #23 THE DISCRETE SITE STICKY WALL tMDEL by J.P. Badiali Laboratoire Propre No 15 de CNRS Physique des Liquides et Electrochimie Tour 22, 5e...Liquides et Electrochimie NTIS CRA&I DTIC TAB 5 Tour 22, 5e Etage, 4 Place Jussieu U’annou;.ced . J ’ tificatlo rn

  10. Asbestos in Plaster and Wall Systems

    Science.gov (United States)

    This collection of letters and clarification on final rules provides guidance on Asbestos National Emissions Standard for Hazardous Air Pollutants for asbestos-containing join compounds, and asbestos-containing materials found in plaster and wall systems.

  11. Visualizing domain wall and reverse domain superconductivity.

    Science.gov (United States)

    Iavarone, M; Moore, S A; Fedor, J; Ciocys, S T; Karapetrov, G; Pearson, J; Novosad, V; Bader, S D

    2014-08-28

    In magnetically coupled, planar ferromagnet-superconductor (F/S) hybrid structures, magnetic domain walls can be used to spatially confine the superconductivity. In contrast to a superconductor in a uniform applied magnetic field, the nucleation of the superconducting order parameter in F/S structures is governed by the inhomogeneous magnetic field distribution. The interplay between the superconductivity localized at the domain walls and far from the walls leads to effects such as re-entrant superconductivity and reverse domain superconductivity with the critical temperature depending upon the location. Here we use scanning tunnelling spectroscopy to directly image the nucleation of superconductivity at the domain wall in F/S structures realized with Co-Pd multilayers and Pb thin films. Our results demonstrate that such F/S structures are attractive model systems that offer the possibility to control the strength and the location of the superconducting nucleus by applying an external magnetic field, potentially useful to guide vortices for computing application.

  12. Radiologic findings of abdominal wall endometriosis

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Wook [Inje Univ. Ilsan Paik Hospital, Goyang (Korea, Republic of)

    2003-12-01

    To evaluate the imaging findings of abdominal wall endometriosis. In seven of 17 patients with surgically proven endometriosis of the abdominal wall, we retrospectively reviewed the findings of radiologic studies such as abdominal US (n=3), CT (n=4), and MRI (n=1). One patient under went more than one type of imaging, apparently. The surgical history of the seven, and their symptoms and preoperative diagnosis were reviewed, and the size, location, margin and nature of the mass, and the contrast enhancement patterns observed at radiologic studies, were assessed. The chief symptoms were palpable abdominal wall mass (n=5) and lower abdominal pain (n=2) around a surgical scar. Previous surgery included cesarean section (n=5), cesarean section with oophorectomy (n=1) and appendectomy (n=1). Masses were located in the subcutaneous fat layer (n=5) or rectus abdominis muscle (n=2), and their maximum diameter was 2.6 cm. Imaging findings, which correlated closely with the pathologic findings, included a well (n=5) or poorly marginated (n=2) solid mass, with a focal cystic area apparent in two cases. Although imaging findings of abdominal wall endometriosis may not be specific for diagnosis, the presence of a solid abdominal mass in female patients of reproductive age with a history of surgery is a diagnostic pointer.

  13. Storage wall for exascale sup ercomputing

    Institute of Scientific and Technical Information of China (English)

    Wei HU; Guang-ming LIU; Qiong LI; Yan-huang JIANG; Gui-lin CAI

    2016-01-01

    The mismatch between compute performance and I/O performance has long been a stumbling block as supercomputers evolve from petaflops to exaflops. Currently, many parallel applications are I/O intensive, and their overall running times are typically limited by I/O performance. To quantify the I/O performance bottleneck and highlight the significance of achieving scalable performance in peta/exascale supercomputing, in this paper, we introduce for the first time a formal definition of the ‘storage wall’ from the perspective of parallel application scalability. We quantify the effects of the storage bottleneck by providing a storage-bounded speedup, defining the storage wall quantitatively, presenting existence theorems for the storage wall, and classifying the system architectures depending on I/O performance variation. We analyze and extrapolate the existence of the storage wall by experiments on Tianhe-1A and case studies on Jaguar. These results provide insights on how to alleviate the storage wall bottleneck in system design and achieve hardware/software optimizations in peta/exascale supercomputing.

  14. 14 CFR 121.245 - Fire walls.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fire walls. 121.245 Section 121.245 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., auxiliary power unit, fuel-burning heater, or other item of combustion equipment that is intended for...

  15. Conductivity of single-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Gets, A. V.; Krainov, V. P., E-mail: vpkrainov@mail.ru [Moscow Institute of Physics and Technology (Russian Federation)

    2016-12-15

    The conductivity of single-walled carbon nanotubes at low temperatures is calculated. It is shown that it is much higher than the well-known conductivity of a model 1D Fermi system. This is a purely quantum-mechanical effect.

  16. Genetics Home Reference: abdominal wall defect

    Science.gov (United States)

    ... Aug;6(4):232-6. Citation on PubMed Islam S. Clinical care outcomes in abdominal wall defects. Curr ... Site Map Customer Support Selection Criteria for Links USA.gov Copyright Privacy Accessibility FOIA Viewers & Players U.S. ...

  17. Tearing Down the Wall: Literature and Science.

    Science.gov (United States)

    Westcott, Warren B.; Spell, J. Everett

    1999-01-01

    Suggests English teachers might draw from authors such as Carl Sagan, Arthur C. Clarke, Mary Shelly and others: (1) to knock down the walls that separate science and literature; (2) to show their interrelationship; and (3) to instill enthusiasm for the study of both. (NH)

  18. Terahertz Conductivity of Single Walled Nanotube Films

    Institute of Scientific and Technical Information of China (English)

    韩家广; 朱志远; 何峰; 廖怡; 王震遐; 张伟; 余礼平; 孙立涛; 王庭太

    2003-01-01

    The conductivity of single walled nanotube films is investigated with a combination of the Maxwel1-Garnett (MG)model and the Drude-Lorentzian (DL) model in the Terahertz region. A theoretical fit for Jeon's experiment is given and a decrease of the real conductivity with increasing frequency is predicted. Meanwhile, the MG and DL models are also discussed for different samples.

  19. Domain wall partition functions and KP

    CERN Document Server

    Foda, O; Zuparic, M

    2009-01-01

    We observe that the partition function of the six vertex model on a finite square lattice with domain wall boundary conditions is (a restriction of) a KP tau function and express it as an expectation value of charged free fermions (up to an overall normalization).

  20. Vortex dynamics of particle-wall collisions

    Science.gov (United States)

    Leweke, Thomas; Thompson, Mark C.; Hourigan, Kerry

    2003-11-01

    We present results from an experimental and numerical study of the flow generated by a particle impacting onto a solid wall at low Reynolds numbers. Experimentally, a 3/4" bronze sphere attached to an inelastic string was lowered onto a Plexiglas plate inside a glass tank, using a stepper motor. Direct Numerical Simulations were carried out using either an axisymmetric or a fully 3D spectral-element code. The parameters varied were the running distance before impact, the sphere Reynolds number during motion, and the stopping distance away from the wall. For running lengths less than 7.5 diameters, the sphere wake remains axisymmetric in the form of an attached vortex ring. At impact, this ring overtakes the sphere and spreads out along the wall. When the sphere stops more than 0.3 diameters away from the wall, the secondary vorticity generated at the sphere surface rolls up into a second vortex ring persisting over a long time. At Reynolds number above 1000, the flow after impact exhibits a 3D instability with azimuthal wave numbers of around 20. Flow visualizations, vorticity fields, and quantitative information on the flow topology will be shown to illustrate the different regimes. The effect of a rebound of the sphere is also discussed.

  1. Self-consistent dynamics of wall slip

    NARCIS (Netherlands)

    Dubbeldam, J.L.A.; Molenaar, J.

    2003-01-01

    A simple molecular model is studied to explain wall slip in a polymer melt. We consider a tube model for tethered chains in which the most important relaxation mechanisms: convective constraint release and chain stretching (retraction), are incorporated. Furthermore, we take the interactions between

  2. Brick Walls and AdS/CFT

    CERN Document Server

    Kay, Bernard S

    2011-01-01

    We discuss the relationship between the bulk-boundary correspondence in Rehren's algebraic holography (and in other 'fixed-background' approaches to holography) and in mainstream 'Maldacena AdS/CFT'. Especially, we contrast the understanding of black-hole entropy from the viewpoint of QFT in curved spacetime -- in the framework of 't Hooft's 'brick wall' model -- with the understanding based on Maldacena AdS/CFT. We show that the brick-wall modification of a Klein Gordon field in the Hartle-Hawking-Israel state on 1+2-Schwarzschild AdS (BTZ) has a well-defined boundary limit with the same temperature and entropy as the brick-wall-modified bulk theory. One of our main purposes is to point out a close connection, for general AdS/CFT situations, between the puzzle raised by Arnsdorf and Smolin regarding the relationship between Rehren's algebraic holography and mainstream AdS/CFT and the puzzle embodied in the 'correspondence principle' proposed by Mukohyama and Israel in their work on the brick-wall approach to...

  3. How European physics reached across the Wall

    CERN Document Server

    Stange, T

    2002-01-01

    In the early 1960s, East German physicists collaborated with CERN, despite the restrictions that existed as a result of the Berlin Wall. Thomas Stange, author of a book on the history of the Zeuthen laboratory near East Berlin, tells the tale.

  4. Outer Rail for Wall Plate Covering

    DEFF Research Database (Denmark)

    2013-01-01

    The outer rail retains two lateral screw webs of an intermediate rail to construct a base for wall plate covering. Two retention devices are disposed oppositely on respective inner sides of each retention web for retaining a respective screw web of the intermediate rail. Each retention device...

  5. Effect of cyanoacrylate treatment of cavity walls.

    Science.gov (United States)

    Fukushi, Y; Fusayama, T

    1980-04-01

    Cyanoacrylate treatment of the cavity wall for composite resin restoration failed to keep adhesion when set, but the marginal closure improved markedly both in vivo and vitro, even when thermal-cycled. It irritated the pulp slightly only at the beginning. Ethylcyanoacrylate was superior to methylcyanoacrylate in regard to adhesion, leakage and pulp response.

  6. Domain wall dynamics of magnetically bistable microwires

    Directory of Open Access Journals (Sweden)

    Ipatov M.

    2012-06-01

    Full Text Available We studied domain wall propagation of magnetically-bistable Fe- Co-rich microwires paying attention on effect of applied and internal stresses. We measured hysteresis loops and domain wall propagation in various magnetic Fe- Co-rich amorphous microwires with metallic nucleus diameters (from 12 □m till 22 □m using Sixtus Tonks-like experiments. Application of tensile stresses results in decreasing of domain wall velocity. We discussed magnetoelastic contribution in dynamics of domain wall propagation. We observed, that microwires with different geometries exhibit v(H dependences with different slopes. Application of stresses resulted in decrease of DW velocity, v, and DW mobility S. Quite fast DW propagation (v till 2500 m/s at H about 30 A/m has been observed in low magnetostrictive magnetically bistable Co56Fe8Ni10Si110B16 microwires. Consequently, we can assume that generally magnetoelastic energy affects DW dynamics: decreasing magnetoelastic energy, Kme, DW velocity increases.

  7. ABDOMINAL WALL DESMOID TUMOUR OVER APPENDICECTOMY SCAR

    OpenAIRE

    Vijaya; Sarbeshwar; Gogoi

    2015-01-01

    BACKGROUND: Desmoid tumors are slow growing deep fibromatoses with aggressive infiltration of adjacent tissue but without any metastatic potential . (1,2,3) CASE PRESENTATION: We report a female patient with desmoid tumor of the abdominal wall over appendicectomy scar w ho underwent primary resection. Preoperative evaluation incl uded abdominal ultrasound, and computed tomography. The histology of this cases revealed a desmoid tumor. CONCLUSION: ...

  8. REVIEW - BIOMATERIALS FOR ABDOMINAL-WALL RECONSTRUCTION

    NARCIS (Netherlands)

    SIMMERMACHER, RKJ; BLEICHRODT, RP; SCHAKENRAAD, JM

    1992-01-01

    The reconstruction of large abdominal wall defects still is a major surgical problem. Many different techniques have been developed for this purpose, most of which appeared to be unsatisfactory. The lack of sufficient tissue requires the insertion of prosthetic material. Non-absorbable prostheses

  9. Evolution of the Stability Work from Classic Retaining Walls to Mechanically Stabilized Earth Walls

    Directory of Open Access Journals (Sweden)

    Anghel Stanciu

    2008-01-01

    Full Text Available For the consolidation of soil mass and the construction of the stability works for roads infrastructure it was studied the evolution of these kinds of works from classical retaining walls - common concrete retaining walls, to the utilization in our days of the modern and competitive methods - mechanically stabilized earth walls. Like type of execution the variety of the reinforced soil is given by the utilization of different types of reinforcing inclusions (steel strips, geosynthetics, geogrids or facing (precast concrete panels, dry cast modular blocks, metal sheets and plates, gabions, and wrapped sheets of geosynthetics.

  10. Cell wall integrity signaling and innate immunity in plants.

    Science.gov (United States)

    Nühse, Thomas S

    2012-01-01

    All plant pathogens and parasites have had to develop strategies to overcome cell walls in order to access the host's cytoplasm. As a mechanically strong, multi-layered composite exoskeleton, the cell wall not only enables plants to grow tall but also protects them from such attacks. Many plant pathogens employ an arsenal of cell wall degrading enzymes, and it has long been thought that the detection of breaches in wall integrity contributes to the induction of defense. Cell wall fragments are danger-associated molecular patterns or DAMPs that can trigger defense signaling pathways comparable to microbial signals, but the picture is likely to be more complicated. A wide range of defects in cell wall biosynthesis leads to enhanced pathogen resistance. We are beginning to understand the essential role of cell wall integrity surveillance for plant growth, and the connection of processes like cell expansion, plasma membrane-cell wall contact and secondary wall biosynthesis with plant immunity is emerging.

  11. Fast domain wall dynamics in amorphous and nanocrystalline magnetic microwires

    Energy Technology Data Exchange (ETDEWEB)

    Varga, R., E-mail: rvarga@upjs.sk [Institute of Physics, Faculty of Science, UPJS, Park Angelinum 9, 041 54, Kosice (Slovakia); Klein, P.; Richter, K. [Institute of Physics, Faculty of Science, UPJS, Park Angelinum 9, 041 54, Kosice (Slovakia); Zhukov, A. [Dept. Fisica de Materiales, Fac. Quimica, UPV/EHU, San Sebastian (Spain); Vazquez, M. [Instituto de Ciencia de Materiales de Madrid, CSIC, Sor Juana Ines de la Cruz 3, 28049 Cantoblanco, Madrid (Spain)

    2012-10-15

    We have studied the effect of thermal treatment on the domain wall dynamics of FeSiB and FeCoMoB microwires. It was shown that annealing in transversal magnetic field increases the domain wall mobility as well as the domain wall velocity. Annealing under the tensile stress hinders the appearance of the monodomain structure but application of tensile stress leads to the magnetic bistability having the domain wall mobility twice higher that in as-cast state. Further increase of the tensile stress reduces the domain wall mobility but the domain wall velocity increases as a result of the decrease of critical propagation field. Annealing of the FeCoMoB microwire by Joule heating leads to introduction of the circular anisotropy that favors the vortex domain wall. Such treatment increases the domain wall mobility as well as the maximum domain wall velocity.

  12. A review of CANDU feeder wall thinning

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Han Sub [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Flow Accelerated Corrosion is an active degradation mechanism of CANDU feeder. The tight bend downstream to Grayloc weld connection, close to reactor face, suffers significant wall thinning by FAC. Extensive in-service inspection of feeder wall thinning is very difficult because of the intense radiation field, complex geometry, and space restrictions. Development of a knowledge-based inspection program is important in order to guarantee that adequate wall thickness is maintained throughout the whole life of feeder. Research results and plant experiences are reviewed, and the plant inspection databases from Wolsong Units One to Four are analyzed in order to support developing such a knowledge-based inspection program. The initial thickness before wall thinning is highly non-uniform because of bending during manufacturing stage, and the thinning rate is non-uniform because of the mass transfer coefficient distributed non-uniformly depending on local hydraulics. It is obvious that the knowledge-based feeder inspection program should focus on both fastest thinning locations and thinnest locations. The feeder wall thinning rate is found to be correlated proportionately with QV of each channel. A statistical model is proposed to assess the remaining life of each feeder using the QV correlation and the measured thicknesses. W-1 feeder suffered significant thinning so that the shortest remaining life barely exceeded one year at the end of operation before replacement. W-2 feeder showed far slower thinning than W-1 feeder despite the faster coolant flow. It is believed that slower thinning in W-2 is because of higher chromium content in the carbon steel feeder material. The average Cr content of W-2 feeder is 0.051%, while that value is 0.02% for W-1 feeder. It is to be noted that FAC is reduced substantially even though the Cr content of W-2 feeder is still very low

  13. Complexity of the transcriptional network controlling secondary wall biosynthesis.

    Science.gov (United States)

    Zhong, Ruiqin; Ye, Zheng-Hua

    2014-12-01

    Secondary walls in the form of wood and fibers are the most abundant biomass produced by vascular plants, and are important raw materials for many industrial uses. Understanding how secondary walls are constructed is of significance in basic plant biology and also has far-reaching implications in genetic engineering of plant biomass better suited for various end uses, such as biofuel production. Secondary walls are composed of three major biopolymers, i.e., cellulose, hemicelluloses and lignin, the biosynthesis of which requires the coordinated transcriptional regulation of all their biosynthesis genes. Genomic and molecular studies have identified a number of transcription factors, whose expression is associated with secondary wall biosynthesis. We comprehensively review how these secondary wall-associated transcription factors function together to turn on the secondary wall biosynthetic program, which leads to secondary wall deposition in vascular plants. The transcriptional network regulating secondary wall biosynthesis employs a multi-leveled feed-forward loop regulatory structure, in which the top-level secondary wall NAC (NAM, ATAF1/2 and CUC2) master switches activate the second-level MYB master switches and they together induce the expression of downstream transcription factors and secondary wall biosynthesis genes. Secondary wall NAC master switches and secondary wall MYB master switches bind to and activate the SNBE (secondary wall NAC binding element) and SMRE (secondary wall MYB-responsive element) sites, respectively, in their target gene promoters. Further investigation of what and how developmental signals trigger the transcriptional network to regulate secondary wall biosynthesis and how different secondary wall-associated transcription factors function cooperatively in activating secondary wall biosynthetic pathways will lead to a better understanding of the molecular mechanisms underlying the transcriptional control of secondary wall biosynthesis.

  14. Enzymes and other agents that enhance cell wall extensibility

    Science.gov (United States)

    Cosgrove, D. J.

    1999-01-01

    Polysaccharides and proteins are secreted to the inner surface of the growing cell wall, where they assemble into a network that is mechanically strong, yet remains extensible until the cells cease growth. This review focuses on the agents that directly or indirectly enhance the extensibility properties of growing walls. The properties of expansins, endoglucanases, and xyloglucan transglycosylases are reviewed and their postulated roles in modulating wall extensibility are evaluated. A summary model for wall extension is presented, in which expansin is a primary agent of wall extension, whereas endoglucanases, xyloglucan endotransglycosylase, and other enzymes that alter wall structure act secondarily to modulate expansin action.

  15. Antiferromagnetic domain wall motion driven by spin-orbit torques

    Science.gov (United States)

    Shiino, Takayuki; Oh, Se-Hyeok; Haney, Paul M.; Lee, Seo-Won; Go, Gyungchoon; Park, Byong-Guk; Lee, Kyung-Jin

    2016-01-01

    We theoretically investigate dynamics of antiferromagnetic domain walls driven by spin-orbit torques in antiferromagnet/heavy metal bilayers. We show that spin-orbit torques drive antiferromagnetic domain walls much faster than ferromagnetic domain walls. As the domain wall velocity approaches the maximum spin-wave group velocity, the domain wall undergoes Lorentz contraction and emits spin-waves in the terahertz frequency range. The interplay between spin-orbit torques and the relativistic dynamics of antiferromagnetic domain walls leads to the efficient manipulation of antiferromagnetic spin textures and paves the way for the generation of high frequency signals from antiferromagnets. PMID:27588878

  16. Shear-resistant behavior of light composite shear wall

    Institute of Scientific and Technical Information of China (English)

    李升才; 董毓利

    2015-01-01

    Shear test results for a composite wall panel in a light composite structure system are compared with test results for shear walls in Japan. The analysis results show that this kind of composite wall panel works very well, and can be regarded as a solid panel. The composite wall panel with a hidden frame is essential for bringing its effect on shear resistance into full play. Comprehensive analysis of the shear-resistant behavior of the composite wall panel suggests that the shear of the composite shear wall panel can be controlled by the cracking strength of the web shearing diagonal crack.

  17. Shear-Resistant Behavior Analysis of Light Composite Shear Walls

    Institute of Scientific and Technical Information of China (English)

    李升才; 江见鲸; 于庆荣

    2002-01-01

    Shear test results for a composite wall panel in a light composite structure system are compared with test results for shear walls in Japan in this paper. The analysis results show that this kind of composite wall panel works very well, and can be regarded as a solid panel. The composite wall panel with a hidden frame is essential for bringing its effect on shear resistance into full play. Comprehensive analysis of the shear-resistant behavior of the composite wall panel suggests that the shear of the composite shear wall panel can be controlled by the cracking strength of the web shearing diagonal crack.

  18. [Chest Wall Reconstruction Using Titanium Plates Sandwiched Between Sheets after Resection of Chest Wall Chondrosarcoma].

    Science.gov (United States)

    Endoh, Makoto; Oizumi, Hiroyuki; Kato, Hirohisa; Suzuki, Jun; Watarai, Hikaru; Hamada, Akira; Suzuki, Katsuyuki; Takahashi, Ai; Nakahashi, Kenta; Sugawara, Masato; Tsuchiya, Takashi; Sadahiro, Mitsuaki

    2016-07-01

    Extensive chest wall resection carries the risk of difficult reconstruction and surgical complications. We report our experience on chest wall reconstruction using titanium plates for a wide thoracic defect after tumor resection. A 74-year-old man was diagnosed with chondrosarcoma of the 6th rib on the right. He needed extensive chest wall resection because of skip lesions on 4th rib noted on operative inspection, leaving a defect measuring 33 × 20 cm. Reconstruction using 5 transverse titanium plates sandwiched between an expanded polytetrafluoroethylene patch and a polypropylene mesh sheet stabilized the chest wall. This reconstruction allowed successful separation from ventilatory support after operation. The postoperative course was uneventful, and he was discharged on postoperative day 20. The advantages of this form of reconstruction over conventional prostheses are rigidity, and stability and usability.

  19. Comparative Study of Adsorption Isotherms of Vitamin C on Multi wall and single wall Carbon Nanotube

    Directory of Open Access Journals (Sweden)

    Azin Dehmolaei

    2014-03-01

    Full Text Available We have studied the interaction of Vitamin C solution on multi-wall and single-wall carbon nanotubeAfter investigated comparative study and assigned to Vitamin C adsorption isotherm. The adsorption equilibrium isotherms were fitted by Freundlich, Langmuir, and Temkin models. It was found that the Langmuirmodel described the adsorption process better than other two isotherm models. The amount of Antioxidant drug(Vitamin C adsorbed on Multi wallcarbon nanotube surface increased with the increase of the initial Antioxidant concentration. Based on the results, under similar conditions the efficiency of adsorption of Vitamin C by Multi-wall carbon nanotube(MWCNTs was more thansingle-wall carbon nanotube.

  20. SimWall: a practical user-friendly stereo tiled display wall system

    Institute of Scientific and Technical Information of China (English)

    XIE Li-jun; ZHENG Yao; YANG Ting-jun; GAO Wen-xuan; PAN Ning-he

    2007-01-01

    Sim Wall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show,large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, Sim Wall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, Sim Wall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints,projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall software environment.

  1. Increased wall-to-wall curing contraction in thin bonded resin layers.

    Science.gov (United States)

    Feilzer, A J; De Gee, A J; Davidson, C L

    1989-01-01

    Wall-to-wall (WTW) polymerization contraction of filled and unfilled chemically and photo-initiated resins was studied in relation to the WTW distance. In an experimental set-up, the resins were bonded to two opposing disks, and the axial (WTW) displacement resulting from the polymerization shrinkage was measured continuously. It was found that the WTW contraction increased with decreasing WTW distance and ultimately reached a value of almost three times the linear polymerization shrinkage.

  2. Rotational stabilization of the resistive wall modes in tokamaks with a ferritic wall

    Science.gov (United States)

    Pustovitov, V. D.; Yanovskiy, V. V.

    2015-03-01

    The dynamics of the rotating resistive wall modes (RWMs) is analyzed in the presence of a uniform ferromagnetic resistive wall with μ ̂≡μ/μ0≤4 ( μ is the wall magnetic permeability, and μ0 is the vacuum one). This mimics a possible arrangement in ITER with ferromagnetic steel in test blanket modules or in future experiments in JT-60SA tokamak [Y. Kamada, P. Barabaschi, S. Ishida, the JT-60SA Team, and JT-60SA Research Plan Contributors, Nucl. Fusion 53, 104010 (2013)]. The earlier studies predict that such a wall must provide a destabilizing influence on the plasma by reducing the beta limit and increasing the growth rates, compared to the reference case with μ ̂=1 . This is true for the locked modes, but the presented results show that the mode rotation changes the tendency to the opposite. At μ ̂>1 , the rotational stabilization related to the energy sink in the wall becomes even stronger than at μ ̂=1 , and this "external" effect develops at lower rotation frequency, estimated as several kHz at realistic conditions. The study is based on the cylindrical dispersion relation valid for arbitrary growth rates and frequencies. This relation is solved numerically, and the solutions are compared with analytical dependences obtained for slow ( s /dw≫1 ) and fast ( s /dw≪1 ) "ferromagnetic" rotating RWMs, where s is the skin depth and dw is the wall thickness. It is found that the standard thin-wall modeling becomes progressively less reliable at larger μ ̂ , and the wall should be treated as magnetically thick. The analysis is performed assuming only a linear plasma response to external perturbations without constraints on the plasma current and pressure profiles.

  3. Engineering the Oryza sativa cell wall with rice NAC transcription factors regulating secondary wall formation

    Directory of Open Access Journals (Sweden)

    Kouki eYoshida

    2013-10-01

    Full Text Available Plant tissues that require structural rigidity synthesize a thick, strong secondary cell wall of lignin, cellulose and hemicelluloses in a complicated bridged structure. Master regulators of secondary wall synthesis were identified in dicots, and orthologs of these regulators have been identified in monocots, but regulation of secondary cell wall formation in monocots has not been extensively studied. Here we demonstrate that the rice transcription factors SECONDARY WALL NAC DOMAIN PROTEINs (SWNs can regulate secondary wall formation in rice (Oryza sativa and are potentially useful for engineering the monocot cell wall. The OsSWN1 promoter is highly active in sclerenchymatous cells of the leaf blade and less active in xylem cells. By contrast, the OsSWN2 promoter is highly active in xylem cells and less active in sclerenchymatous cells. OsSWN2 splicing variants encode two proteins; the shorter protein (OsSWN2S has very low transcriptional activation ability, but the longer protein (OsSWN2L and OsSWN1 have strong transcriptional activation ability. In rice, expression of an OsSWN2S chimeric repressor, driven by the OsSWN2 promoter, resulted in stunted growth and para-wilting (leaf rolling and browning under normal water conditions due to impaired vascular vessels. The same OsSWN2S chimeric repressor, driven by the OsSWN1 promoter, caused a reduction of cell wall thickening in sclerenchymatous cells, a drooping leaf phenotype, reduced lignin and xylose contents and increased digestibility as forage. These data suggest that OsSWNs regulate secondary wall formation in rice and manipulation of OsSWNs may enable improvements in monocotyledonous crops for forage or biofuel applications.

  4. Rotational stabilization of the resistive wall modes in tokamaks with a ferritic wall

    Energy Technology Data Exchange (ETDEWEB)

    Pustovitov, V. D. [National Research Centre “Kurchatov Institute,” Moscow 123182 (Russian Federation); National Research Nuclear University “MEPhI,” Kashirskoe sh. 31, Moscow 115409 (Russian Federation); Yanovskiy, V. V. [Consorzio RFX, Associazione EURATOM-ENEA sulla Fusione, Padova 35127 (Italy)

    2015-03-15

    The dynamics of the rotating resistive wall modes (RWMs) is analyzed in the presence of a uniform ferromagnetic resistive wall with μ{sup ^}≡μ/μ{sub 0}≤4 (μ is the wall magnetic permeability, and μ{sub 0} is the vacuum one). This mimics a possible arrangement in ITER with ferromagnetic steel in test blanket modules or in future experiments in JT-60SA tokamak [Y. Kamada, P. Barabaschi, S. Ishida, the JT-60SA Team, and JT-60SA Research Plan Contributors, Nucl. Fusion 53, 104010 (2013)]. The earlier studies predict that such a wall must provide a destabilizing influence on the plasma by reducing the beta limit and increasing the growth rates, compared to the reference case with μ{sup ^}=1. This is true for the locked modes, but the presented results show that the mode rotation changes the tendency to the opposite. At μ{sup ^}>1, the rotational stabilization related to the energy sink in the wall becomes even stronger than at μ{sup ^}=1, and this “external” effect develops at lower rotation frequency, estimated as several kHz at realistic conditions. The study is based on the cylindrical dispersion relation valid for arbitrary growth rates and frequencies. This relation is solved numerically, and the solutions are compared with analytical dependences obtained for slow (s/d{sub w}≫1) and fast (s/d{sub w}≪1) “ferromagnetic” rotating RWMs, where s is the skin depth and d{sub w} is the wall thickness. It is found that the standard thin-wall modeling becomes progressively less reliable at larger μ{sup ^}, and the wall should be treated as magnetically thick. The analysis is performed assuming only a linear plasma response to external perturbations without constraints on the plasma current and pressure profiles.

  5. A Novel Technique for Anterior Vaginal Wall Prolapse Repair: Anterior Vaginal Wall Darn

    Directory of Open Access Journals (Sweden)

    Osman Köse

    2013-01-01

    Full Text Available Aim. The aim of this study is to introduce a new technique, anterior vaginal wall darn (AVWD, which has not been used before to repair the anterior vaginal wall prolapse, a common problem among women. Materials and Methods. Forty-five women suffering from anterior vaginal wall prolapse were operated on with a new technique. The anterior vaginal wall was detached by sharp and blunt dissection via an incision beginning from the 1 cm proximal aspect of the external meatus extending to the vaginal apex, and the space between the tissues that attach the lateral walls of the vagina to the arcus tendineus fascia pelvis (ATFP was then darned. Preoperation and early postoperation evaluations of the patients were conducted and summarized. Results. Data were collected six months after operation. Cough stress test (CST, Pelvic Organ Prolapse Quantification (POP-Q evaluation, Incontinence Impact Questionnaire (IIQ-7, and Urogenital Distress Inventory (UDI-6 scores indicated recovery. According to the early postoperation results, all patients were satisfied with the operation. No vaginal mucosal erosion or any other complications were detected. Conclusion. In this initial series, our short-term results suggested that patients with grade II-III anterior vaginal wall prolapsus might be treated successfully with the AVWD method.

  6. Skyrmion domain wall collision and domain wall-gated skyrmion logic

    Science.gov (United States)

    Xing, Xiangjun; Pong, Philip W. T.; Zhou, Yan

    2016-08-01

    Skyrmions and domain walls are significant spin textures of great technological relevance to magnetic memory and logic applications, where they can be used as carriers of information. The unique topology of skyrmions makes them display emergent dynamical properties as compared with domain walls. Some studies have demonstrated that the two topologically inequivalent magnetic objects could be interconverted by using cleverly designed geometric structures. Here, we numerically address the skyrmion domain wall collision in a magnetic racetrack by introducing relative motion between the two objects based on a specially designed junction. An electric current serves as the driving force that moves a skyrmion toward a trapped domain wall pair. We see different types of collision dynamics depending on the driving parameters. Most importantly, the modulation of skyrmion transport using domain walls is realized in this system, allowing a set of domain wall-gated logical NOT, NAND, and NOR gates to be constructed. This work provides a skyrmion-based spin-logic architecture that is fully compatible with racetrack memories.

  7. Virtual-Wall Model for Molecular Dynamics Simulation

    Directory of Open Access Journals (Sweden)

    Lijuan Qian

    2016-12-01

    Full Text Available A large number of molecules are usually required to model atomic walls in molecular dynamics simulations. A virtual-wall model is proposed in this study to describe fluid-wall molecular interactions, for reducing the computational time. The infinite repetition of unit cell structures within the atomic wall causes the periodicity of the force acting on a fluid molecule from the wall molecules. This force is first calculated and then stored in the memory. A fluid molecule appearing in the wall force field is subjected to the force from the wall molecules. The force can then be determined by the position of the molecule relative to the wall. This model avoids excessive calculations of fluid-wall interactions and reduces the computational time drastically. The time reduction is significant for small fluid density and channel height. The virtual-wall model is applied to Poiseuille and Couette flows, and to a flow in a channel with a rough surface. Results of the virtual and atomic wall simulations agree well with each other, thereby indicating the usefulness of the virtual-wall model. The appropriate bin size and cut-off radius in the virtual-wall model are also discussed.

  8. A possible formation mechanism of double-walled and multi-walled carbon nanotube: a molecular dynamics study

    Science.gov (United States)

    Han, Dianrong; Luo, Chenglin; Dai, Yafei; Zhu, Xingfeng

    2016-09-01

    Molecular dynamics simulations based on an empirical potential were performed to study the interaction of graphene nanoribbons and the single-walled carbon nanotubes. The results indicated that a piece of graphene nanoribbon can form a tube structure inside or outside single-walled carbon nanotubes spontaneously under certain condition. Based on this kind of spontaneous phenomenon, we proposed a new possible formation mechanism of double walled carbon nanotube and multi-walled carbon nanotube, and suggested the possibility of controlling the structure of double-walled carbon nanotube and/or multi-walled carbon nanotube.

  9. Polarization control at spin-driven ferroelectric domain walls

    Science.gov (United States)

    Leo, Naëmi; Bergman, Anders; Cano, Andres; Poudel, Narayan; Lorenz, Bernd; Fiebig, Manfred; Meier, Dennis

    2015-04-01

    Unusual electronic states arise at ferroelectric domain walls due to the local symmetry reduction, strain gradients and electrostatics. This particularly applies to improper ferroelectrics, where the polarization is induced by a structural or magnetic order parameter. Because of the subordinate nature of the polarization, the rigid mechanical and electrostatic boundary conditions that constrain domain walls in proper ferroics are lifted. Here we show that spin-driven ferroelectricity promotes the emergence of charged domain walls. This provides new degrees of flexibility for controlling domain-wall charges in a deterministic and reversible process. We create and position a domain wall by an electric field in Mn0.95Co0.05WO4. With a magnetic field we then rotate the polarization and convert neutral into charged domain walls, while its magnetic properties peg the wall to its location. Using atomistic Landau-Lifshitz-Gilbert simulations we quantify the polarization changes across the two wall types and highlight their general occurrence.

  10. Alfalfa stem tissues: Cell wall deposition, composition, and degradability

    NARCIS (Netherlands)

    Jung, H.G.; Engels, F.M.

    2002-01-01

    Declining cell wall degradability of alfalfa (Medicago sativa L.) stems with maturation limits the nutritional value of alfalfa for ruminants. This study characterized changes in cell wall concentration, composition, and degradability by rumen microbes resulting from alfalfa stem tissue proliferatio

  11. Alfalfa stem tissues: Cell wall deposition, composition, and degradability

    NARCIS (Netherlands)

    Jung, H.G.; Engels, F.M.

    2002-01-01

    Declining cell wall degradability of alfalfa (Medicago sativa L.) stems with maturation limits the nutritional value of alfalfa for ruminants. This study characterized changes in cell wall concentration, composition, and degradability by rumen microbes resulting from alfalfa stem tissue

  12. Alfalfa stem tissues: Cell wall deposition, composition, and degradability

    NARCIS (Netherlands)

    Jung, H.G.; Engels, F.M.

    2002-01-01

    Declining cell wall degradability of alfalfa (Medicago sativa L.) stems with maturation limits the nutritional value of alfalfa for ruminants. This study characterized changes in cell wall concentration, composition, and degradability by rumen microbes resulting from alfalfa stem tissue proliferatio

  13. Effects of wall materials and lyophilization on the viability of ...

    African Journals Online (AJOL)

    Effects of wall materials and lyophilization on the viability of Weissella confusa. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... (Aloe vera gel, sodium casein, and sodium alginate) as wall materials, were used.

  14. Abdominal Wall Desmoid during Pregnancy: Diagnostic Challenges

    Directory of Open Access Journals (Sweden)

    Johnny Awwad

    2013-01-01

    Full Text Available Background. Desmoids are benign tumors, with local invasive features and no metastatic potential, which have rarely been described to be pregnancy associated. Case. We described the rapid growth of an anterior abdominal wall mass in a 40-year-old pregnant woman. Due to its close proximity to the enlarged uterus, it was misdiagnosed to be a uterine leiomyoma by ultrasound examination. Final tissue diagnosis and radical resection were done at the time of abdominal delivery. Conclusion. Due to the diagnostic limitations of imaging techniques, desmoids should always be considered when the following manifestations are observed in combination: progressive growth of a solitary abdominal wall mass during pregnancy and well-delineated smooth tumor margins demonstrated by imaging techniques. This case emphasizes the importance of entertaining uncommon medical conditions in the differential diagnosis of seemingly common clinical manifestations.

  15. Thermal and Quantum Fluctuations around Domain Walls

    CERN Document Server

    Aragão de Carvalho, C

    2002-01-01

    We compute thermal and quantum fluctuations in the background of a domain wall in a scalar field theory at finite temperature using the exact scalar propagator in the subspace orthogonal to the wall's translational mode. The propagator makes it possible to calculate terms of any order in the semiclassical expansion of the partition function of the system. The leading term in the expansion corresponds to the fluctuation determinant, which we compute for arbitrary temperature in space dimensions 1,2, and 3. Our results may be applied to the description of thermal scalar propagation in the presence of soliton defects (in polymers, magnetic materials, etc.) and interfaces which are characterized by kinklike profiles. They lead to predictions as to how classical free energies, surface tensions, and interface profiles are modified by fluctuations, allowing for comparison with both numerical and experimental data. They can also be used to estimate transition temperatures. Furthermore, the simple analytic form of the...

  16. Near Wall Turbulence: an experimental view

    Science.gov (United States)

    Stanislas, Michel

    2016-11-01

    The aim of this presentation is to summarize the understanding of the near wall turbulence phenomena obtained at Laboratoire de Mécanique de Lille using both hot wire anemometry and PIV. A wind tunnel was built in 1993 specifically designed for these two measurement techniques and aimed at large Reynolds numbers. Several experiments were performed since then in the frame of different PhDs and European projects, all aimed at evidencing turbulence organization in this region. These have fully benefited of the extraordinary development of PIV in that time frame, which has allowed entering visually and quantitatively inside the complex spatial and temporal structure of near wall turbulence. The presentation will try to emphasize the benefit of this approach in terms of understanding and modelling, illustrated by some representative results obtained. M. Stanislas particularly acknowledges the financial support of Region Nord Pas de Calais, unmissing during 25 years.

  17. The Kevlar-walled anechoic wind tunnel

    Science.gov (United States)

    Devenport, William J.; Burdisso, Ricardo A.; Borgoltz, Aurelien; Ravetta, Patricio A.; Barone, Matthew F.; Brown, Kenneth A.; Morton, Michael A.

    2013-08-01

    The aerodynamic and acoustic performance of an anechoic wind tunnel test section with walls made from thin Kevlar cloth have been measured and analyzed. The Kevlar test section offers some advantages over a conventional free-jet arrangement. The cloth contains the bulk of the flow but permits the transmission of sound with little loss. The containment results in smaller far-field aerodynamic corrections meaning that larger models can be tested at higher Reynolds numbers. The containment also eliminates the need for a jet catcher and allows for a much longer test section. Model-generated noise is thus more easily separated from facility background using beamforming. Measurements and analysis of acoustic and aerodynamic corrections for a Kevlar-walled test section are presented and discussed, along with benchmark trailing edge noise measurements.

  18. Abdominal wall hernias: imaging with spiral CT

    Energy Technology Data Exchange (ETDEWEB)

    Stabile Ianora, A.A.; Midiri, M.; Vinci, R.; Rotondo, A.; Angelelli, G. [Department of Radiology, Bari University Hospital (Italy)

    2000-06-01

    Computed tomography is an accurate method of identifying the various types of abdominal wall hernias, especially if they are clinically occult, and of distinguishing them from other diseases such as hematomas, abscesses and neoplasia. In this study we examined the CT images of 94 patients affected by abdominal wall hernias observed over a period of 6 years. Computed tomography clearly demonstrates the anatomical site of the hernial sac, the content and any occlusive bowel complications due to incarceration or strangulation. Clinical diagnosis of external hernias is particularly difficult in obese patients or in those with laparotic scars. In these cases abdominal imaging is essential for a correct preoperative diagnosis and to determine the most effective treatment. (orig.)

  19. Magnetic domain-wall racetrack memory.

    Science.gov (United States)

    Parkin, Stuart S P; Hayashi, Masamitsu; Thomas, Luc

    2008-04-11

    Recent developments in the controlled movement of domain walls in magnetic nanowires by short pulses of spin-polarized current give promise of a nonvolatile memory device with the high performance and reliability of conventional solid-state memory but at the low cost of conventional magnetic disk drive storage. The racetrack memory described in this review comprises an array of magnetic nanowires arranged horizontally or vertically on a silicon chip. Individual spintronic reading and writing nanodevices are used to modify or read a train of approximately 10 to 100 domain walls, which store a series of data bits in each nanowire. This racetrack memory is an example of the move toward innately three-dimensional microelectronic devices.

  20. Parietal wall endometriosis: a rare case report

    Directory of Open Access Journals (Sweden)

    Mahija Sahu

    2015-04-01

    Full Text Available A 28 year old P2L1 with one previous cesarean presented with cyclical pain in periumblical area just below umbilicus for 1 year with USG finding suggestive of parietal wall endometriosis planned for surgery on her 2nd day of menstruation. She underwent diagnostic laparoscopy with complete excision of endometrioma. Diagnostic laparoscopy showed no evidence of endometrioma in the pelvic cavity except for omental adhesion at parietal wall endometrioma site, adhesiolysis of omentum, mesh repair of rectus sheath defect done. She is followed up for last 3 cycles post-operative and has no cyclical pain further. [Int J Reprod Contracept Obstet Gynecol 2015; 4(2.000: 524-526

  1. Abdominal Wall Endometrioma. Report of Two Cases

    Directory of Open Access Journals (Sweden)

    Tahiluma Santana Pedraza

    2014-08-01

    Full Text Available Abdominal wall endometrioma is a condition rarely seen by surgeons. It represents a diagnostic challenge due to its similarity with other tumors. This entity occurs in fertile women and often appears two to five years after gynecological and obstetric surgical procedures. It must be considered when dealing with a cyclically painful nodule located in a laparotomy scar. The diagnosis is established by histological examination; most imaging tests determine the characteristics of the lesion, concomitant lesions and the intra-abdominal origin or location in the abdominal wall. The cases of two patients treated at the General Surgery Department of the María Eugenia González Comprehensive Diagnostic Center in the Capital District, Venezuela, are presented. Wide excision of the tissue and histological examination were performed, confirming the diagnosis. The postoperative course was uneventful. This case is presented given the rarity of this condition.

  2. ECOLOGICAL SOLUTIONS FOR LOW ENERGY BUILDING WALLS

    Directory of Open Access Journals (Sweden)

    Camelia COŞEREANU

    2012-03-01

    Full Text Available The paper presents constructive solutions for thermal insulation of the building walls, using recycled and biodegradable materials. The thermal insulatingcomposite materials are made of textile fibers obtained from waste of the textile industrial sector, wood fibers and wood chips from the wood industrial sector and mineral materials as binders: gypsum, cement, ceramic dust or industrial clay. For each type of compositematerial, the thermal conductivity coefficient has been determined and compared. The final results of thermal insulation of the walls were obtained after using the software of analyzing the thermal insulation property of various proposed composites. The main advantage of the proposed materials is their ecological characteristic compared with classical structures used today in buildings thermal insulation.

  3. [Structure and function of fungal cell wall].

    Science.gov (United States)

    Ohno, Naohito

    2008-12-01

    Cell wall glycans of fungi/yeasts are reviewed. Fungi/yeasts produce various kinds of polysaccharides. As part of the cell wall they are interlinked with other components forming a huge network. The insolubility and complex with multiple components makes the research very tough. Studies on beta-glucan have been performed from various views, such as chemistry, conformation, solubility, tissue distribution and metabolism, biological activity, clinical application, receptor, biosynthesis, and antibody. Studies on mannan focus on immunotoxicity, such as anaphylactoid reaction and coronary arteritis induction. alpha-glucan, chitin, and capsular polysaccharide were also mentioned in relation to structure and genes. Compared with human and animal polysaccharides, fungi/yeasts polysaccharides have very characteristic properties.

  4. Superheater Tube Flat Wall Stationary Temperature Field

    Directory of Open Access Journals (Sweden)

    Parpiev A.T.

    2016-01-01

    Full Text Available The BKZ-220-100-9 steam generator platen superheater tube flat wall stationary temperature fields analysis have been made. The six steel grades, using in boiler fabrication, namely, St. 10, St. 20, 12H1MF, 15HM, 1H18N9T and 12H18N12T, have been used. The temperature curves calculation has been made by using outer and inner surface heat-transfer coefficients nine different combinations.

  5. An invisible wall put up by ghosts

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>When I was a child, my grandmother would often tell me ghost stories. One of them was about an invisible wall that had been put up by ghosts.It was a winter night that was getting darker and darker, colder and colder. A lone farmer was driving his horse and cart along a country path. As he was getting close to his village, he could see the cemetery with the myriad tombs on both sides

  6. Domain wall magneto-Seebeck effect

    OpenAIRE

    Krzysteczko, Patryk; Hu, Xiukun; Liebing, Niklas; Sievers, Sibylle; Schumacher, Hans W.

    2014-01-01

    The interplay between charge, spin, and heat currents in magnetic nano systems subjected to a temperature gradient has lead to a variety of novel effects and promising applications studied in the fast-growing field of spincaloritronics. Here we explore the magnetothermoelectrical properties of an individual magnetic domain wall in a permalloy nanowire. In thermal gradients of the order of few Kelvin per micrometer along the long wire axis, we find a clear magneto-Seebeck signature due to the ...

  7. Stochastic behavior of nanoscale dielectric wall buckling

    Science.gov (United States)

    Friedman, Lawrence H.; Levin, Igor; Cook, Robert F.

    2016-01-01

    The random buckling patterns of nanoscale dielectric walls are analyzed using a nonlinear multi-scale stochastic method that combines experimental measurements with simulations. The dielectric walls, approximately 200 nm tall and 20 nm wide, consist of compliant, low dielectric constant (low-k) fins capped with stiff, compressively stressed TiN lines that provide the driving force for buckling. The deflections of the buckled lines exhibit sinusoidal pseudoperiodicity with amplitude fluctuation and phase decorrelation arising from stochastic variations in wall geometry, properties, and stress state at length scales shorter than the characteristic deflection wavelength of about 1000 nm. The buckling patterns are analyzed and modeled at two length scales: a longer scale (up to 5000 nm) that treats randomness as a longer-scale measurable quantity, and a shorter-scale (down to 20 nm) that treats buckling as a deterministic phenomenon. Statistical simulation is used to join the two length scales. Through this approach, the buckling model is validated and material properties and stress states are inferred. In particular, the stress state of TiN lines in three different systems is determined, along with the elastic moduli of low-k fins and the amplitudes of the small-scale random fluctuations in wall properties—all in the as-processed state. The important case of stochastic effects giving rise to buckling in a deterministically sub-critical buckling state is demonstrated. The nonlinear multiscale stochastic analysis provides guidance for design of low-k structures with acceptable buckling behavior and serves as a template for how randomness that is common to nanoscale phenomena might be measured and analyzed in other contexts. PMID:27330220

  8. Hydrogen uptake in vanadium first wall structures

    Energy Technology Data Exchange (ETDEWEB)

    Simonen, E.P.; Jones, R.H. [Pacific Northwest National Laboratory, Richland, WA (United States)

    1996-04-01

    Evaluation of hydrogen sources and transport are needed to assess the mechanical integrity of V structures. Two sources include implantation and transmutation. The proposed coatings for the DEMO and ITER first wall strongly influence retention of hydrogen isotopes. Upper limit calculations of hydrogen inventory were based on recycling to the plasma and an impermeable coolant-side coating. Hydrogen isotope concentrations in V approaching 1,000 appm may be activated.

  9. Preparation of double-walled carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    JIANG Bin; WEI Jinquan; CI Lijie; WU Dehai

    2004-01-01

    Double-walled carbon nanotubes were prepared using the floating chemical vapor deposition with methane as carbon source and adding small amount of sulfur into the ferrocene catalyst. The optimized technological parameters are: the reaction temperature is 1200℃; the catalyst vapor temperature is 80℃; the flow rate of argon is 2000 SCCM; the flow rate of methane is 5 SCCM. The purified DWNTs under these optimized technological parameters have high purity above 90 wt%.

  10. Patterns on House Walls in Gyirong

    Institute of Scientific and Technical Information of China (English)

    LIUXIANJIONG

    2004-01-01

    Once you have a chance to visit Jingchuan and the Mingjiang River Valley in northwestem Sichuan Province, you will find yourself in a mysterious world:Rivers meander through mountains like hada scarves, snow-capped mountains fill people with mysterious atmosphere, sutra streamers flutter in wind, pillboxes stretch their arms to hug the sky, and there are various kinds of patterns drawn on the walls of villages and mountain rocks.

  11. Moisture Conditions in Passive House Wall Constructions

    OpenAIRE

    Gullbrekken, Lars; Geving, Stig; Time, Berit; ANDRESEN, Inger

    2015-01-01

    Buildings for the future, i.e zero emission buildings and passive houses, will need well insulated building envelopes, which includes increased insulation thicknesses for roof, wall and floor constructions. Increased insulation thicknesses may cause an increase in moisture levels and thereby increased risk of mold growth. There is need for increased knowledge about moisture levels in wood constructions of well insulated houses, to ensure robust and moisture safe solutions. Monitoring of w...

  12. Soft wall model for a holographic superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Afonin, S.S.; Pusenkov, I.V. [Saint Petersburg State University, St.Petersburg (Russian Federation)

    2016-06-15

    We consider the soft wall holographic approach for description of the high-T{sub c} superconductivity. In comparison with the existing bottom-up holographic superconductors, the proposed approach is more phenomenological and does not describe the superconducting phase transition. On the other hand, technically it is simpler and has more freedom for fitting the conductivity properties of the real high-T{sub c} materials in the superconducting phase. Some examples of emerging models are analyzed. (orig.)

  13. Soft wall model for a holographic superconductor

    CERN Document Server

    Afonin, S S

    2015-01-01

    We apply the soft wall holographic model from hadron physics to a description of the high-$T_c$ superconductivity. In comparison with the existing bottom-up holographic superconductors, the proposed approach is more phenomenological. On the other hand, it is much simpler and has more freedom for fitting the conductivity properties of the real high-$T_c$ materials. We demonstrate some examples of emerging models and discuss a possible origin of the approach.

  14. Effect of wall hardness on hemolysis.

    Science.gov (United States)

    Yasuda, T; Shimokasa, K; Funakubo, A; Fukui, Y

    2000-08-01

    One of the major problems for artificial organs to develop and to improve is the reduction of hemolysis. The optimum designing of less hemolysis artificial organs is achieved through computational analysis and flow visualization techniques. However, it is impossible to know the quantitative relation between hemolysis and these analytic data. Thus, in vitro studies were performed to estimate these devices on hemolysis because there is no standard for designing these devices with less hemolysis. Therefore, it is essential to reveal the relation between blood flow behaviors and hemolysis. Previous studies reported that hemolysis was caused by a combination of physical factors. In particular, shear stress, pressure, and other fluid dynamical effects were shown to induce hemolysis. In another fluid dynamical experiment reported, the collision flow against the sanded wall was considered the most important factor that directly effected blood damage, which led to hemolysis. The blood flow impact of the collision against the wall effected serious damage to red blood cells. The objective of this study was to point out the relationship between physical force (pressure) in collision flow and hemolysis. In vitro tests using bovine blood and a circulation model that included a jet flow that collides against a wall were conducted. In these tests, we changed the material of the wall by replacing silicone rubber of various thicknesses. The thickness of the silicone rubber is inversely proportional to its hardness. The results show that the increasing rate of hemolysis was lower when the surface was coated by silicone rubber. In conclusion, we considered that it is possible to reduce hemolysis by adjusting the hardness of the material and contacted blood flow.

  15. Stent implantation influence wall shear stress evolution

    Science.gov (United States)

    Bernad, S. I.; Totorean, A. F.; Bosioc, A. I.; Petre, I.; Bernad, E. S.

    2016-06-01

    Local hemodynamic factors are known affect the natural history of the restenosis critically after coronary stenting of atherosclerosis. Stent-induced flows disturbance magnitude dependent directly on the strut design. The impact of flow alterations around struts vary as the strut geometrical parameters change. Our results provide data regarding the hemodynamic parameters for the blood flow in both stenosed and stented coronary artery under physiological conditions, namely wall shear stress and pressure drop.

  16. Black hole entropy without brick walls

    OpenAIRE

    Xiang, Li

    2002-01-01

    The properties of the thermal radiation are discussed by using the new equation of state density motivated by the generalized uncertainty relation in the quantum gravity. There is no burst at the last stage of the emission of a Schwarzshild black hole. When the new equation of state density is utilized to investigate the entropy of a scalar field outside the horizon of a static black hole, the divergence appearing in the brick wall model is removed, without any cutoff. The entropy proportiona...

  17. Hollow clay tile wall program summary report

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, R.C.; Jones, W.D. [Gilbert/Commonwealth, Inc., Oak Ridge, TN (United States); Beavers, J.E. [MS Technology, Inc. (United States)

    1995-07-30

    Many of the Y-12 Plant buildings, constructed during the 1940s and 1950s, consist of steel ed concrete framing infilled with hollow clay tile (HCT). The infill was intended to provide for building enclosure and was not designed to have vertical or lateral load-carrying capacity. During the late 1970s and early 1980s, seismic and wind evaluations were performed on many of these buildings in conjunction with the preparation of a site-wide safety analysis report. This analytical work, based on the best available methodology, considered lateral load-carrying capacity of the HCT infill on the basis of building code allowable shear values. In parallel with the analysis effort, DOE initiated a program to develop natural phenomena capacity and performance criteria for existing buildings, but these criteria did not specify guidelines for determining the lateral force capacity of frames infilled with HCT. The evaluation of infills was, therefore, based on the provisions for the design of unreinforced masonry as outlined in standard masonry codes. When the results of the seismic and wind evaluations were compared with the new criteria, the projected building capacities fell short of the requirements. Apparently, if the buildings were to meet the new criteria, many millions of dollars would be required for building upgrades. Because the upgrade costs were significant, the assumptions and approaches used in the analyses were reevaluated. Four issues were identified: (1) Once the infilled walls cracked, what capacity (nonlinear response), if any, would the walls have to resist earthquake or wind loads applied in the plane of the infill (in-plane)? (2) Would the infilled walls remain within the steel or reinforced concrete framing when subjected to earthquake or high wind loads applied perpendicular to the infill (out-of-plane)? (3) What was the actual shear capacity of the HCT infill? (4) Was modeling the HCT infill as a shear wall the best approach?

  18. Wall Climbing Micro Ground Vehicle (MGV)

    Science.gov (United States)

    2013-09-01

    into the preliminary design of the control platform. This concept is used on the City Climber robot from the City College of New York to redirect... Chennai , India, 2011. 6. Lee, Y.; Ahuja, V.; Hosangadi, A.; Slipper, M. E.; Mulvihill, L. P.; Birkbeck, R.; Coleman, R. M. Impeller Design of a...Teheran, Iran, 2011. 12. Xiao, J.; Sadegh, A. City -Climber: A New Generation Wall-Climbing Robots; The City College, City University of New York USA

  19. Crossing Walls to Date Girls in Zhaba

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In Zhaba, whenever a boy falls in love with a girl, no ceremony is necessary. The boy only has to cross the 10-meter-high wall of the girl's house to spend the night with her. Children born in this way are brought up by the mothers; the fathers are exempt from responsibility, but make some efforts in terms of support under obligation. In their own maternal families,males play assisting roles in bringing up their sisters' children.

  20. Conventional Weapons Effects on Reinforced Soil Walls.

    Science.gov (United States)

    1995-03-01

    of the reinforced soil wall. 14. SUBJECT TERMS 15. NUMBER OF PAGES Reinforced soil, conventional weapons, protective structures, 388 geosynthetics ...high tensile strength materials such as steel strips or geosynthetics . A single face of a reinforced soil berm can be constructed to approximately...yards of geosynthetics representing $3.1 billion have been used in a wide range of civil engineering applications (Koerner, 1990). Between 1991 and 1992

  1. Semisimplicity of Hecke and (walled) Brauer Algebras

    DEFF Research Database (Denmark)

    Andersen, Henning Haahr; Tubbenhauer, Daniel; Stroppel, Catharina

    We show how to use Jantzen's sum formula for Weyl modules to prove semisimplicity criteria for endomorphism algebras of Uq-tilting modules (for any field 핂 and any parameter q∈핂−{0,−1}). As an application, we recover the semisimplicity criteria for the Hecke algebras of types A and B, the walled...... Brauer algebras and the Brauer algebras from our more general approach....

  2. Machining Thin-Walled Cylindrical Parts

    Science.gov (United States)

    Cimbak, Joe; Spagnolo, Jim; Kraus, Dan

    1988-01-01

    Cylindrical walls only few thousandths of inch thick machined accurately and without tears or punctures with aid of beryllium copper mandrel. Chilled so it contracts, then inserted in cylinder. As comes to room temperature, mandrel expands and fits snugly inside cylinder. Will not allow part to slide and provides solid backup to prevent deflection when part machined by grinding wheel. When machining finished, cylinder-and-mandrel assembly inserted in dry ice, mandrel contracts and removed from part.

  3. Space-time characteristics of wall-pressure and wall shear-stress fluctuations in wall-modeled large eddy simulation

    Science.gov (United States)

    Park, George Ilhwan; Moin, Parviz

    2016-06-01

    We report the space-time characteristics of the wall-pressure fluctuations and wall shear-stress fluctuations from wall-modeled large eddy simulation (WMLES) of a turbulent channel flow at Reτ=2000 . Two standard zonal wall models (equilibrium stress model and nonequilibrium model based on unsteady RANS) are employed, and it is shown that they yield similar results in predicting these quantities. The wall-pressure and wall shear-stress fields from WMLES are analyzed in terms of their r.m.s. fluctuations, spectra, two-point correlations, and convection velocities. It is demonstrated that the resolution requirement for predicting the wall-pressure fluctuations is more stringent than that for predicting the velocity. At least δ /Δ x >20 and δ /Δ z >30 are required to marginally resolve the integral length scales of the pressure-producing eddies near the wall. Otherwise, the pressure field is potentially aliased. Spurious high wave number modes dominate in the streamwise direction, and they contaminate the pressure spectra leading to significant overprediction of the second-order pressure statistics. When these conditions are met, the pressure statistics and spectra at low wave number or low frequency agree well with the DNS and experimental data. On the contrary, the wall shear-stress fluctuations, modeled entirely through the RANS-based wall models, are largely underpredicted and relatively insensitive to the grid resolution. The short-time, small-scale near-wall eddies, which are neither resolved nor modeled adequately in the wall models, seem to be important for accurate prediction of the wall shear-stress fluctuations.

  4. Mesh repair of hernias of the abdominal wall

    OpenAIRE

    2003-01-01

    textabstractA hernia of the abdominal wall is a permanent or intermittent protrusion of abdominal contents outside the abdominal cavity through a defect in the abdominal wall. Approximately 75% of all hernias occur in the inguinal region. Other types of hernias of the ventral abdominal wall are incisional, umbilical, epigastric and Spigelian hernia. In chapter 1 an overview of hernias of the abdominal wall is described. The incidence, clinical implications and treatment options and their comp...

  5. Analysis of flat slab building with and without shear wall

    OpenAIRE

    Dhanaji R. Chavan; Mohite D. D.; Dr. C. P. Pise; Pawar Y. P; Kadam S.S.; Deshmukh C. M.

    2016-01-01

    The analytical research carried out to study the behaviour flat slab building with and without shear wall reported in the present work. For analysis 15 storied flat slab building is analyzed for seismic behaviour. Response spectrum method is used for analysis considering different shear wall positions using ETABS software. Five different positions of shear wall were studied for analysis. From this analysis shear wall at core having square shape is most suitable case for construction of shear ...

  6. Redistribution of metals on the JET vessel wall

    Energy Technology Data Exchange (ETDEWEB)

    Ehrenberg, J.; Behrisch, R.; Martinelli, A.P.; Coad, J.P.; De Kock, L.; Goodall, D.H.J.; McCracken, G.M.

    1987-02-01

    Wall long term samples (LTS) which were exposed during the 1984 and 1985 operational periods of JET have been investigated by means of surface analysis techniques. The results indicate that deposition of wall material (Fe, Cr, Ni) and its distribution on the vessel wall were strongly affected by wall erosion on bellows protection plates during unstable discharge phases. Erosion sources and deposition sinks are spatially correlated indicating that most of the eroded material is deposited close to its source.

  7. Domain Wall Mobility in Co-Based Amorphous Wire

    Directory of Open Access Journals (Sweden)

    Maria Kladivova

    2007-01-01

    Full Text Available Dynamics of the domain wall between opposite circularly magnetized domains in amorphous cylindrical sample with circular easy direction is theoretically studied. The wall is driven by DC current. Various mechanisms which influence the wall velocity were taken into account: current magnitude, deformation of the mowing wall, Hall effect, axially magnetized domain in the middle of the wire. Theoretical results obtained are in a good agreement with experiments on Cobased amorphous ferromagnetic wires.

  8. High Performance Walls in Hot-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Hoeschele, M.; Springer, D.; Dakin, B.; German, A.

    2015-01-01

    High performance walls represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. The primary goal in improving wall thermal performance revolves around increasing the wall framing from 2x4 to 2x6, adding more cavity and exterior rigid insulation, achieving insulation installation criteria meeting ENERGY STAR's thermal bypass checklist, and reducing the amount of wood penetrating the wall cavity.

  9. Association Mapping of Cell Wall Synthesis Regulatory Genes and Cell Wall Quality in Switchgrass

    Energy Technology Data Exchange (ETDEWEB)

    Bartley, Laura [Univ. of Oklahoma, Norman, OK (United States). Dept. of Microbiology and Plant Biology; Wu, Y. [Oklahoma State Univ., Stillwater, OK (United States); Zhu, L. [Oklahoma State Univ., Stillwater, OK (United States); Brummer, E. C. [Noble Foundation, Ardmore, OK (United States); Saha, M. [Noble Foundation, Ardmore, OK (United States)

    2016-05-31

    Inefficient conversion of biomass to biofuels is one of the main barriers for biofuel production from such materials. Approximately half of polysaccharides in biomass remain unused by typical biochemical conversion methods. Conversion efficiency is influenced by the composition and structure of cell walls of biomass. Grasses such as wheat, maize, and rice, as well as dedicated perennial bioenergy crops, like switchgrass, make up ~55% of biomass that can be produced in the United States. Grass cell walls have a different composition and patterning compared with dicotyledonous plants, including the well-studied model plant, Arabidopsis. This project identified genetic determinants of cell wall composition in grasses using both naturally occurring genetic variation of switchgrass and gene network reconstruction and functional assays in rice. In addition, the project linked functional data in rice and other species to switchgrass improvement efforts through curation of the most abundant class of regulators in the switchgrass genome. Characterizing natural diversity of switchgrass for variation in cell wall composition and properties, also known as quality, provides an unbiased avenue for identifying biologically viable diversity in switchgrass cell walls. To characterizing natural diversity, this project generated cell wall composition and enzymatic deconstruction data for ~450 genotypes of the Switchgrass Southern Association Collection (SSAC), a diverse collection composed of 36 switchgrass accessions from the southern U.S. distribution of switchgrass. Comparing these data with other measures of cell wall quality for the same samples demonstrated the complementary nature of the diverse characterization platforms now being used for biomass characterization. Association of the composition data with ~3.2K single nucleotide variant markers identified six significant single nucleotide variant markers co-associated with digestibility and another compositional trait. These

  10. BPS domain walls from backreacted orientifolds

    CERN Document Server

    Blåbäck, Johan; Van Riet, Thomas; Vercnocke, Bert

    2013-01-01

    Compactifications with D-brane and orientifold sources lead to standard gauged supergravity theories if the sources are smeared over the internal directions. It is therefore of interest to find how the solutions described by the gauged supergravity are altered by properly localising the sources. In this paper we analyse this for BPS domain wall solutions in the seven-dimensional gauged supergravity obtained from an O6 toroidal orientifold compactification in massive IIA supergravity. This is one of the simplest no-scale supergravities that can be constructed and analysed in full detail. We find and discuss the BPS domain walls both when the O6 planes are smeared and localised. When the O6 planes are localised the domain wall solutions live in a warped compactification. In order to get explicit expressions we also consider the non-compact versions of the solutions for which the O6 planes have been traded for D6 branes. Through T-duality we obtain partially localised solutions for compactifications to four dime...

  11. Silo with a Corrugated Sheet Wall

    Science.gov (United States)

    Németh, Csaba; Brodniansky, Ján

    2013-09-01

    Silos and tanks are currently being used to create reserves of stored materials. Their importance is based on balancing the production and consumption of bulk materials to establish an adequate reserve throughout the year. The case study introduced within the framework of this paper focuses on thin-walled silos made of corrugated sheets and on an approach for designing these types of structures. The storage of bulk materials causes compression or tensile stresses in the walls of a silo structure. The effect of a frictional force in the silo walls creates an additional bending moment in a wave, which ultimately affects the resulting bending moments. Several mathematical and physical models were used in order to examine various types of loading and their effects on a structure. Subsequently, the accuracy of the computational models was verified by experimental measurements on a grain silo in Bojničky, Slovakia. A comparison of the experimental and mathematical models shows a reasonable match and confirms the load specifications, while indicating that the mathematical model was correct.

  12. Plant Cell Wall Matrix Polysaccharide Biosynthesis

    Institute of Scientific and Technical Information of China (English)

    Ajay Pal S. Sandhu; Gursharn S. Randhawa; Kanwarpal S. Dhugga

    2009-01-01

    The wall of an expanding plant cell consists primarily of cellulose microfibrils embedded in a matrix of hemi-cellulosic and pectic polysaccharides along with small amounts of structural and enzymatic proteins. Matrix polysacchar-ides are synthesized in the Golgi and exported to the cell wall by exocytosis, where they intercalate among cellulose microfibrUs, which are made at the plasma membrane and directly deposited into the cell wall. Involvement of Golgi glucan synthesis in auxin-induced cell expansion has long been recognized; however, only recently have the genes corresponding to glucan synthases been identified. Biochemical purification was unsuccessful because of the labile nature and very low abundance of these enzymes. Mutational genetics also proved fruitless. Expression of candidate genes identified through gene expression profiling or comparative genomics in heterologous systems followed by functional characterization has been relatively successful. Several genes from the cellulose synthase-like (Cs/) family have been found to be involved in the synthesis of various hemicellulosic glycans. The usefulness of this approach, however, is limited to those enzymes that probably do not form complexes consisting of unrelated proteins. Nonconventional approaches will continue to incre-mentally unravel the mechanisms of Golgi polysaccharide biosynthesis.

  13. Isotropy and anisotropy of the arterial wall.

    Science.gov (United States)

    Weizsacker, H W; Pinto, J G

    1988-01-01

    The passive biomechanical response of intact cylindrical rat carotid arteries is studied in vitro and compared with the mechanical response of rubber tubes. Using true stress and natural strain in the definition of the incremental modulus of elasticity, the tissue wall properties are analyzed over wide ranges of simultaneous circumferential and longitudinal deformations. The type of loading chosen is 'physiological' i.e. symmetric: the cylindrical segments are subjected to internal pressure and axial prestretch without torsion or shear. Several aspects pertaining to the choice of parameters characterizing the material are discussed and the analysis pertaining to the deformational behavior of a hypothetical compliant tube with Hookean wall material is presented. The experimental results show that while rubber response can be adequately represented as linearly elastic and isotropic, the overall response of vascular tissue is highly non-linear and anisotropic. However, for states of deformation that occur in vivo, the elasticity of arteries is quite similar to that of rubber tubes and as such the arterial wall may be viewed as incrementally isotropic for the range of deformations that occur in vivo.

  14. Development of NRU reflector wall inspection system

    Energy Technology Data Exchange (ETDEWEB)

    Lumsden, R.H.; Luloff, B.V.; Zahn, N.; Simpson, N., E-mail: lumsdenr@aecl.ca [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

    2013-06-15

    In 2009 May, the National Research Universal (NRU) calandria leaked. During the next year, the calandria was inspected with six new Non-Destructive Evaluation (NDE) techniques to determine the extent of the corrosion, repaired, and finally the repair was inspected with four additional new NDE techniques before the reactor was returned to service. The calandria is surrounded by a light-water reflector vessel fabricated from the same material as the calandria vessel. Concerns that the same corrosion mechanism had damaged the reflector vessel led to the development of a system to inspect the full circumference of the reflector wall for corrosion damage. The inspection region could only be accessed through 64 mm diameter ports, was 10 m below the port, and had to be inspected from the corroded surface. The ultrasonic technique was designed to produce a closely spaced wall thickness (WT) grid over an area of approximately 5 m2 on the corroded surface using a very small probe holder. This paper describes the Reflector Wall Inspection (RWI) development project and the system that resulted. (author)

  15. Association Mapping of Cell Wall Synthesis Regulatory Genes and Cell Wall Quality in Switchgrass

    Energy Technology Data Exchange (ETDEWEB)

    Bartley, Laura [Univ. of Oklahoma, Norman, OK (United States). Dept. of Microbiology and Plant Biology; Wu, Y. [Oklahoma State Univ., Stillwater, OK (United States); Zhu, L. [Oklahoma State Univ., Stillwater, OK (United States); Brummer, E. C. [Noble Foundation, Ardmore, OK (United States); Saha, M. [Noble Foundation, Ardmore, OK (United States)

    2016-05-31

    Inefficient conversion of biomass to biofuels is one of the main barriers for biofuel production from such materials. Approximately half of polysaccharides in biomass remain unused by typical biochemical conversion methods. Conversion efficiency is influenced by the composition and structure of cell walls of biomass. Grasses such as wheat, maize, and rice, as well as dedicated perennial bioenergy crops, like switchgrass, make up ~55% of biomass that can be produced in the United States. Grass cell walls have a different composition and patterning compared with dicotyledonous plants, including the well-studied model plant, Arabidopsis. This project identified genetic determinants of cell wall composition in grasses using both naturally occurring genetic variation of switchgrass and gene network reconstruction and functional assays in rice. In addition, the project linked functional data in rice and other species to switchgrass improvement efforts through curation of the most abundant class of regulators in the switchgrass genome. Characterizing natural diversity of switchgrass for variation in cell wall composition and properties, also known as quality, provides an unbiased avenue for identifying biologically viable diversity in switchgrass cell walls. To characterizing natural diversity, this project generated cell wall composition and enzymatic deconstruction data for ~450 genotypes of the Switchgrass Southern Association Collection (SSAC), a diverse collection composed of 36 switchgrass accessions from the southern U.S. distribution of switchgrass. Comparing these data with other measures of cell wall quality for the same samples demonstrated the complementary nature of the diverse characterization platforms now being used for biomass characterization. Association of the composition data with ~3.2K single nucleotide variant markers identified six significant single nucleotide variant markers co-associated with digestibility and another compositional trait. These

  16. The Berlin Wall: A Simulation for the Social Studies Classroom

    Science.gov (United States)

    Russell, William B., III

    2010-01-01

    November 9, 2009, marked the twentieth anniversary of the opening of the Berlin Wall. The Wall, a symbol of the Cold War, separated the German people for 28 years (1961-1989), keeping those on the East side isolated. Although the construction and dismantling of the Berlin Wall is a significant part of history, the topic is little covered in the…

  17. Abdominal wall paresis as a complication of laparoscopic surgery

    NARCIS (Netherlands)

    G.H. van Ramshorst (Gabrielle); G.J. Kleinrensink (Gert Jan); J.J. Hermans (John); T. Terkivatan (Türkan); J.F. Lange (Johan)

    2009-01-01

    textabstractPurpose: Abdominal wall nerve injury as a result of trocar placement for laparoscopic surgery is rare. We intend to discuss causes of abdominal wall paresis as well as relevant anatomy. Methods: A review of the nerve supply of the abdominal wall is illustrated with a rare case of a patie

  18. Seismic behavior of semi-supported steel shear walls

    DEFF Research Database (Denmark)

    Jahanpour, A.; Jönsson, J.; Moharrami, H.

    2012-01-01

    During the recent past decade semi-supported steel shear walls (SSSW) have been introduced as an alternative to the traditional type of steel plate shear walls. In this system the shear wall does not connect directly to the main columns of the building frame; instead it is connected to a pair of ...

  19. Detecting defects in diaphragm walls prior to excavation

    NARCIS (Netherlands)

    Spruit, R.; Hopman, V.; Van Tol, A.F.; Broere, W.

    2011-01-01

    Recent incidents with leaking diaphragm walls during construction of subway lines in Amsterdam and Rotterdam (Netherlands) have led to reconsideration of the diaphragm wall as a retaining wall construction for deep excavations. In our opinion the joints between the panels are the weak spot. During

  20. Two endogenous proteins that induce cell wall extension in plants

    Science.gov (United States)

    McQueen-Mason, S.; Durachko, D. M.; Cosgrove, D. J.

    1992-01-01

    Plant cell enlargement is regulated by wall relaxation and yielding, which is thought to be catalyzed by elusive "wall-loosening" enzymes. By employing a reconstitution approach, we found that a crude protein extract from the cell walls of growing cucumber seedlings possessed the ability to induce the extension of isolated cell walls. This activity was restricted to the growing region of the stem and could induce the extension of isolated cell walls from various dicot stems and the leaves of amaryllidaceous monocots, but was less effective on grass coleoptile walls. Endogenous and reconstituted wall extension activities showed similar sensitivities to pH, metal ions, thiol reducing agents, proteases, and boiling in methanol or water. Sequential HPLC fractionation of the active wall extract revealed two proteins with molecular masses of 29 and 30 kD associated with the activity. Each protein, by itself, could induce wall extension without detectable hydrolytic breakdown of the wall. These proteins appear to mediate "acid growth" responses of isolated walls and may catalyze plant cell wall extension by a novel biochemical mechanism.

  1. Enhanced reactive metal wall for dehalogenation of hydrocarbons

    Science.gov (United States)

    Howson, Paul E.; Mackenzie, Patricia D.; Horney, David P.

    1996-01-01

    A method is provided for remediation of contaminated solutions using a tiered metal wall or column. The tiered metal wall or column has at least three zones with graduated sizes of reducing metal particles. Contaminated solutions pass through the tiered wall or column to dehalogenate contaminant halogenated hydrocarbons.

  2. Enhanced reactive metal wall for dehalogenation of hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Howson, P.E.; Mackenzie, P.D.; Horney, D.P.

    1996-08-06

    A method is provided for remediation of contaminated solutions using a tiered metal wall or column. The tiered metal wall or column has at least three zones with graduated sizes of reducing metal particles. Contaminated solutions pass through the tiered wall or column to dehalogenate contaminant halogenated hydrocarbons. 3 figs.

  3. Mesh repair of hernias of the abdominal wall

    NARCIS (Netherlands)

    W.W. Vrijland (Wietske)

    2003-01-01

    textabstractA hernia of the abdominal wall is a permanent or intermittent protrusion of abdominal contents outside the abdominal cavity through a defect in the abdominal wall. Approximately 75% of all hernias occur in the inguinal region. Other types of hernias of the ventral abdominal wall are inci

  4. Mesh repair of hernias of the abdominal wall

    NARCIS (Netherlands)

    W.W. Vrijland (Wietske)

    2003-01-01

    textabstractA hernia of the abdominal wall is a permanent or intermittent protrusion of abdominal contents outside the abdominal cavity through a defect in the abdominal wall. Approximately 75% of all hernias occur in the inguinal region. Other types of hernias of the ventral abdominal wall are inci

  5. CELL-WALL GROWTH AND PROTEIN SECRETION IN FUNGI

    NARCIS (Netherlands)

    SIETSMA, JH; WOSTEN, HAB; WESSELS, JGH

    1995-01-01

    Secretion of proteins is a vital process in fungi. Because hyphal walls form a diffusion barrier for proteins, a mechanism different from diffusion probably exist to transport proteins across the wall. In Schizophyllum commune, evidence has been obtained for synthesis at the hyphal apex of wall comp

  6. Experimental Assessment of Mechanical Night Ventilation on Inner Wall Surfaces

    DEFF Research Database (Denmark)

    Wenhui, Ji; Heiselberg, Per Kvols; Wang, Houhua

    2016-01-01

    The cooling potential of night ventilation largely depends on the heat exchange at the internal room surfaces. During night time, increased heat transfer on a vertical wall is expected due to cool supply air that flows along the internal wall surface from the top of the wall. This paper presents ...

  7. Sound waves in two-dimensional ducts with sinusoidal walls

    Science.gov (United States)

    Nayfeh, A. H.

    1974-01-01

    The method of multiple scales is used to analyze the wave propagation in two-dimensional hard-walled ducts with sinusoidal walls. For traveling waves, resonance occurs whenever the wall wavenumber is equal to the difference of the wavenumbers of any two duct acoustic modes. The results show that neither of these resonating modes could occur without strongly generating the other.

  8. 30 CFR 56.3131 - Pit or quarry wall perimeter.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Pit or quarry wall perimeter. 56.3131 Section... Mining Methods § 56.3131 Pit or quarry wall perimeter. In places where persons work or travel in... stripped back for at least 10 feet from the top of the pit or quarry wall. Other conditions at or near...

  9. The Berlin Wall: A Simulation for the Social Studies Classroom

    Science.gov (United States)

    Russell, William B., III

    2010-01-01

    November 9, 2009, marked the twentieth anniversary of the opening of the Berlin Wall. The Wall, a symbol of the Cold War, separated the German people for 28 years (1961-1989), keeping those on the East side isolated. Although the construction and dismantling of the Berlin Wall is a significant part of history, the topic is little covered in the…

  10. The Green Room: How Border Walls Affect Wildlife

    Science.gov (United States)

    Beckrich, Amanda

    2017-01-01

    The proposed wall along the U.S.-Mexico border would significantly affect wildlife. Most animals cannot get past walls that are hundreds of miles long and many meters tall. Some species along parts of the border where a wall already exists, such as jaguars and ocelots, suffer from dwindling populations and difficulty finding mates. This column…

  11. Enhancement of a sunspot light wall with external disturbances

    CERN Document Server

    Yang, Shuhong; Erdélyi, Robert

    2016-01-01

    Based on the \\emph{Interface Region Imaging Spectrograph} observations, we study the response of a solar sunspot light wall to external disturbances. A flare occurrence near the light wall caused material to erupt from the lower solar atmosphere into the corona. Some material falls back to the solar surface, and hits the light bridge (i.e., the base of the light wall), then sudden brightenings appear at the wall base followed by the rise of wall top, leading to an increase of the wall height. Once the brightness of the wall base fades, the height of the light wall begins to decrease. Five hours later, another nearby flare takes place, a bright channel is formed that extends from the flare towards the light bridge. Although no obvious material flow along the bright channel is found, some ejected material is conjectured to reach the light bridge. Subsequently, the wall base brightens and the wall height begins to increase again. Once more, when the brightness of the wall base decays, the wall top fluctuates to ...

  12. The Effects of Word Walls and Word Wall Activities on the Reading Fluency of First Grade Students

    National Research Council Canada - National Science Library

    Joanne Jasmine; Pamela Schiesl

    2009-01-01

    .... This article describes an action research project designed to improve reading fluency of first grade students by investigating the use of word walls and word wall activities during station time over a four-week period...

  13. Utilities:Other:The Retaining Wall (non-historic) at Pipe Spring National Monument, Arizona (Utilities.gdb:Other:wall)

    Data.gov (United States)

    National Park Service, Department of the Interior — This feature class represents the retaining wall (non-historic) at Pipe Spring National Monument, Arizona. The wall was collected by a Trimble GeoXT GPS unit with...

  14. Value ofultrasound inthediagnostics ofabdominal wall hernias

    Directory of Open Access Journals (Sweden)

    Andrzej Smereczyński

    2014-12-01

    Full Text Available The aim of this paper was to present current state of knowledge and clinical practice in the scope of imaging of anterior abdominal wall hernias. At the moment, diagnostic imaging of abdominal wall hernias utilizes such modalities as ultrasound, computed tomography and magnetic resonance. The two latter methods are not easily available, expensive and usually require filling the intestine with contrast medium or, at times, additional administration of intravenous contrast. Moreover, computed tomography exposes the patient to negative effects of ionizing radiation, and both modalities are contraindicated in claustrophobic patients or patients with renal failure when examination requires intravenous administration of contrast. Under such circumstances, ultrasound examination constitutes the basis of imaging in cases of suspected anterior abdominal wall hernias and in patients with palpable masses in such a location. It ensues from high availability, low cost, noninvasiveness and high diagnostic value of this modality as well as its applicability in all life periods – from foetal life up to old age. Other advantages of ultrasonography include: possibility to conduct the examination dynamically at patient’s bedside, including application of various tests facilitating diagnosis of small, spontaneously reducing and immovable inguinal, femoral, or umbilical hernias, hernia of the linea alba, Spigelian hernia, or various other incisional hernias that pose diagnostic challenges. Ultrasound examination allows for assessment of the size and content of the hernia sac with great precision. Some diagnosticians use the ultrasound probe to exert pressure in an attempt to place the hernia back into the abdominal cavity. Moreover, the above-mentioned method effectively visualizes any complications related to surgical reconstruction of the abdominal wall, such as pathological fluid-filled spaces, recurrent hernias, or

  15. Electromagnetic thin-wall model for simulations of plasma wall-touching kink and vertical modes

    Science.gov (United States)

    Zakharov, Leonid E.; Atanasiu, Calin V.; Lackner, Karl; Hoelzl, Matthias; Strumberger, Erika

    2015-12-01

    > The understanding of plasma disruptions in tokamaks and predictions of their effects require realistic simulations of electric current excitation in three-dimensional vessel structures by the plasma touching the walls. As discovered at JET in 1996 (Litunovski JET Internal Report contract no. JQ5/11961, 1995; Noll et al., Proceedings of the 19th Symposium on Fusion Technology, Lisbon (ed. C. Varandas & F. Serra), vol. 1, 1996, p. 751. Elsevier) the wall-touching kink modes are frequently excited during vertical displacement events and cause large sideways forces on the vacuum vessel which are difficult to withstand in large tokamaks. In disruptions, the sharing of electric current between the plasma and the wall plays an important role in plasma dynamics and determines the amplitude and localization of the sideways force (Riccardo et al., Nucl. Fusion, vol. 40, 2000, p. 1805; Riccardo & Walker, Plasma Phys. Control. Fusion, vol. 42, 2000, p. 29; Zakharov, Phys. Plasmas, vol. 15, 2008, 062507; Riccardo et al., Nucl. Fusion, vol. 49, 2009, 055012; Bachmann et al., Fusion Engng Des., vol. 86, 2011, pp. 1915-1919). This paper describes a flat triangle representation of the electric circuits of a thin conducting wall of arbitrary three-dimensional geometry. Implemented into the shell simulation code (SHL) and the source sink current code (SSC), this model is suitable for modelling the electric currents excited in the wall inductively and through current sharing with the plasma.

  16. Three measuring techniques for assessing the mean wall skin friction in wall-bounded flows

    Science.gov (United States)

    Zanoun, E.-S.; Jehring, L.; Egbers, C.

    2014-04-01

    The present paper aims at evaluating the mean wall skin friction data in laminar and turbulent boundary layer flows obtained from two optical and one thermal measuring techniques, namely, laser-Doppler anemometry (LDA), oil-film interferometry (OFI), and surface hot-film anemometry (SHFA), respectively. A comparison among the three techniques is presented, indicating close agreement in the mean wall skin friction data obtained, directly, from both the OFI and the LDA near-wall mean velocity profiles. On the other hand, the SHFA, markedly, over estimates the mean wall skin friction by 3.5-11.7% when compared with both the LDA and the OFI data, depending on the thermal conductivity of the substrate and glue material, probe calibration, probe contamination, temperature drift and Reynolds number. Satisfactory agreement, however, is observed among all three measuring techniques at higher Reynolds numbers, Re x >106, and within ±5% with empirical relations extracted from the literature. In addition, accurate velocity data within the inertial sublayer obtained using the LDA supports the applicability of the Clauser method to evaluate the wall skin friction when appropriate values for the constants of the logarithmic line are utilized.

  17. Grass Cell Walls: A Story of Cross-Linking

    Science.gov (United States)

    Hatfield, Ronald D.; Rancour, David M.; Marita, Jane M.

    2017-01-01

    Cell wall matrices are complex composites mainly of polysaccharides, phenolics (monomers and polymers), and protein. We are beginning to understand the synthesis of these major wall components individually, but still have a poor understanding of how cell walls are assembled into complex matrices. Valuable insight has been gained by examining intact components to understand the individual elements that make up plant cell walls. Grasses are a prominent group within the plant kingdom, not only for their important roles in global agriculture, but also for the complexity of their cell walls. Ferulate incorporation into grass cell wall matrices (C3 and C4 types) leads to a cross-linked matrix that plays a prominent role in the structure and utilization of grass biomass compared to dicot species. Incorporation of p-coumarates as part of the lignin structure also adds to the complexity of grass cell walls. Feruoylation results in a wall with individual hemicellulosic polysaccharides (arabinoxylans) covalently linked to each other and to lignin. Evidence strongly suggests that ferulates not only cross-link arabinoxylans, but may be important factors in lignification of the cell wall. Therefore, the distribution of ferulates on arabinoxylans could provide a means of structuring regions of the matrix with the incorporation of lignin and have a significant impact upon localized cell wall organization. The role of other phenolics in cell wall formation such as p-coumarates (which can have concentrations higher than ferulates) remains unknown. It is possible that p-coumarates assist in the formation of lignin, especially syringyl rich lignin. The uniqueness of the grass cell wall compared to dicot sepcies may not be so much in the gross composition of the wall, but how the distinctive individual components are organized into a functional wall matrix. These features are discussed and working models are provided to illustrate how changing the organization of feruoylation and p

  18. Fermentation of the endosperm cell walls of monocotyledon and dicotyledon plant species: The relationship between cell wall characteristics and fermentability

    NARCIS (Netherlands)

    Laar, van H.; Tamminga, S.; Williams, B.A.; Verstegen, M.W.A.

    2000-01-01

    Cell walls from the endosperm of four monocotyledons (maize, wheat, rye, and rice) and four dicotyledons (soya bean, lupin, faba bean, and pea) seeds were studied to relate cell wall composition and structure with fermentation characteristics. Cell wall material was isolated from the endosperm of

  19. Influence of orifice-to-wall distance on synthetic jet vortex ring simpinging on a fixed wall

    Institute of Scientific and Technical Information of China (English)

    XU; Yang; FENG; LiHao

    2013-01-01

    Two-dimensional particle image velocimetry (PIV) is used to investigate the influence of the orifice-to-wall distance on synthetic jet vortex rings impinging on a fixed wall. Both evolutions of vortical structures and statistical characteristics of flow fields at different orifice-to-wall distances are presented. It is found that different orifice-to-wall distances have different effects in terms of the vortex strength and impinging speed when the vortex rings are approaching the wall. The secondary vortex ring can be observed within the shear layer only when the dimensionless orifice-to-wall distance is close to or less than the dimensionless stroke length. Consequently, an appropriate orifice-to-wall distance plays a vital role in the sense of impingement effect. The statistical analysis of the flow field indicates that a wall jet forms after impingement, while both the decay rate of the maximum radial velocity and the spreading rate of the half-width decrease with the increasing orifice-to-wall distance. The non-dimensional wall jet velocity profiles at different orifice-to-wall distances all exhibit self-similar behaviors, which is consistent with the theoretical solution of the laminar wall jet.

  20. 75 FR 56880 - Multi-Walled Carbon Nanotubes and Single-Walled Carbon Nanotubes; Significant New Use Rules

    Science.gov (United States)

    2010-09-17

    ... structural characteristics entitled ``Material Characterization of Carbon Nanotubes for Molecular Identity... AGENCY 40 CFR Parts 9 and 721 RIN 2070-AB27 Multi-Walled Carbon Nanotubes and Single-Walled Carbon...). The two chemical substances are identified generically as multi-walled carbon nanotubes (MWCNT) (PMN...

  1. Fermentation of the endosperm cell walls of monocotyledon and dicotyledon plant species: The relationship between cell wall characteristics and fermentability

    NARCIS (Netherlands)

    Laar, van H.; Tamminga, S.; Williams, B.A.; Verstegen, M.W.A.

    2000-01-01

    Cell walls from the endosperm of four monocotyledons (maize, wheat, rye, and rice) and four dicotyledons (soya bean, lupin, faba bean, and pea) seeds were studied to relate cell wall composition and structure with fermentation characteristics. Cell wall material was isolated from the endosperm of th

  2. Investigation of microclimate between wall and furniture with CFD

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard; Woloszyn, Monika; Rode, Carsten

    2005-01-01

    velocities and diffusion transport in constructions is presented. It is a CFD model where the air is modelled as a mixture of dry air and water vapour and walls fluids modelled with ordinary wall characteristics as material properties. This enables easy modelling of moisture transfer within the walls....... This investigation has special focus on the coupling of the moisture transfers in the wall and the moisture content of the air. The microclimate in a room is studied for different geometrical configurations, meaning that the moisture and temperature conditions are analysed and discussed using different distances...... between wall constructions and furnishing....

  3. Design criteria for structural design of silage silo walls

    OpenAIRE

    von Wachenfelt, Hans; Nilsson, Christer; Östergaard, Göran; Olofsson, Anders; Karlsson, Marie

    2014-01-01

    Existing Swedish design guidelines (JBR) cover silo wall heights up to about 3 m. These guidelines presumably overestimate the forces and pressures exerted by silage juice when silo walls are more than 3 m high, which could result in over-sizing, material waste and increased capital costs. This study determined silage physical properties in terms of horizontal wall pressure and evaluated silage juice levels in silos with a wall height of 3 m or more.Wall pressure was measured by transducers m...

  4. Drawing Recognition for Automatic Dimensioning of Shear-Walls

    Institute of Scientific and Technical Information of China (English)

    任爱珠; 喻强; 许云

    2002-01-01

    In computer-aided structural design, the drawing of shear-walls cannot be easily automated; however, dimensioning of the shear-walls provides a method to automate the drawing. This paper presents a drawing recognition method for automatic dimensioning of shear-walls. The regional relationship method includes a graphic shape template library that can learn new shear-wall shapes. The automatic dimensioning of shear-walls is then realized by matching the templates. The regional relationship method for graph recognition effectively describes the topological relationships for graphs to significantly increase the recognition efficiency.

  5. A Study of Aerodynamics in Kevlar-Wall Test Sections

    OpenAIRE

    Brown, Kenneth Alexander

    2014-01-01

    This study is undertaken to characterize the aerodynamic behavior of Kevlar-wall test sections and specifically those containing two-dimensional, lifting models. The performance of the Kevlar-wall test section can be evaluated against the standard of the hard-wall test section, which in the case of the Stability Wind Tunnel (SWT) at Virginia Tech can be alternately installed or replaced by the Kevlar-wall test section. As a first step towards the evaluation of the Kevlar-wall test section aer...

  6. Influence of the wall on the droplet evaporation

    Directory of Open Access Journals (Sweden)

    Misyura S. Y.

    2015-01-01

    Full Text Available Evaporative influence of the wall material and its thickness has been investigated in the present study. The wall influence for heat exchangers is particularly important in the boiling transition regime and in the event of the Leidenfrost temperature. The experimental points significantly diverge in the transition area of the boiling crisis. This fact can be explained by a different residence time of droplet on the wall surface. The discrepancy between the experimental data also takes place at the Leidenfrost temperature. The lower the thermal diffusivity of the wall material (high thermal inertia, the more the wall is cooled under a droplet.

  7. Review:Resuspension of wall deposits in spray dryers

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Wall deposition occurs in spray dryers when dried or partially dried particles contact and adhere to the walls during operation, thus reducing the yield of product collected. Wall deposits also present a product contamination risk and a fire or explosion risk when spray drying products that oxidize exothermically, such as milk powder. Re-entrainment is the resuspension of spray dryer wall deposits into the main gas stream for collection as product. Literature suggests that the process for re-entrainment of particles from spray dryer wall deposits is strongly dependent on particle size and gas velocity.

  8. Vibrations in High Speed Milling of Thin-walled Components

    Institute of Scientific and Technical Information of China (English)

    WANG Tongyue; HE Ning; LI Liang

    2006-01-01

    Thin-walled structures have been widely used in the aerospace industry. The dynamic interaction between the milling cutter and thin-walled workpiece can easily lead to vibration. This paper investigates the vibration caused during milling the thin-walled workpiece on the NC machining center, presents a theoretical milling vibration model of thin-walled beam. The model was verified by using milling experiments and numerical simulations. Some valuable conclusions are derived, this will be references to scientific research and guides to the vibration-free milling of thin-walled structures at different cutting speeds.

  9. High Reynolds number liquid layer flow with flexible walls

    Indian Academy of Sciences (India)

    J S B Gajjar

    2015-05-01

    The stability of liquid layer flow over an inclined flexible wall is studied using asymptotic methods based on the assumption that the Reynolds number is large. The flexible wall behaviour is described by a spring-plate model, and parameters chosen so that the wall flexibility affects the governing boundary layer problem. For the case of a rigid wall, the problem reverts to one studied by Gajjar. Asymptotic analysis of the governing equations leads to the triple-deck equations governing the interaction between the wall layer and the free-surface. The linearised and other solution properties of these set of equations are discussed.

  10. PREFACE: Domain wall dynamics in nanostructures Domain wall dynamics in nanostructures

    Science.gov (United States)

    Marrows, C. H.; Meier, G.

    2012-01-01

    Domain structures in magnetic materials are ubiquitous and have been studied for decades. The walls that separate them are topological defects in the magnetic order parameter and have a wide variety of complex forms. In general, their investigation is difficult in bulk materials since only the domain structure on the surface of a specimen is visible. Cutting the sample to reveal the interior causes a rearrangement of the domains into a new form. As with many other areas of magnetism, the study of domain wall physics has been revitalised by the advent of nanotechnology. The ability to fabricate nanoscale structures has permitted the formation of simplified and controlled domain patterns; the development of advanced microscopy methods has permitted them to be imaged and then modelled; subjecting them to ultrashort field and current pulses has permitted their dynamics to be explored. The latest results from all of these advances are described in this special issue. Not only has this led to results of great scientific beauty, but also to concepts of great applicability to future information technologies. In this issue the reader will find the latest results for these domain wall dynamics and the high-speed processes of topological structures such as domain walls and magnetic vortices. These dynamics can be driven by the application of magnetic fields, or by flowing currents through spintronic devices using the novel physics of spin-transfer torque. This complexity has been studied using a wide variety of experimental techniques at the edge of the spatial and temporal resolution currently available, and can be described using sophisticated analytical theory and computational modelling. As a result, the dynamics can be engineered to give rise to finely controlled memory and logic devices with new functionality. Moreover, the field is moving to study not only the conventional transition metal ferromagnets, but also complex heterostructures, novel magnets and even other

  11. The Layer Cake Walls of Valles Marineris

    Science.gov (United States)

    2007-01-01

    This image of the northern wall of Coprates Chasma, in Valles Marineris, was taken by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) at 1227 UTC (8:27 a.m. EDT) on June 16, 2007, near 13.99 degrees south latitude, 303.09 degrees east longitude. CRISM's image was taken in 544 colors covering 0.36-3.92 micrometers, and shows features as small as 20 meters (66 feet) across. The region covered is just over 10 kilometers (6.2 miles) wide at its narrowest point. Valles Marineris is a large canyon system straddling Mars' equator, with a total size approximating the Mediterranean Sea emptied of water. It is subdivided into several interconnected 'chasmata' each hundreds of kilometers wide and, in some cases, thousands of kilometers long. The walls of several of the chasmata, including Coprates Chasma, expose a section of Mars' upper crust about 5 kilometers (3 miles) in depth. Exposures like these show the layers of rock that record the formation of Mars' crust over geologic time, much as the walls of the Grand Canyon on Earth show part of our planet's history. The upper panel of this montage shows the location of the CRISM image on a mosaic from the Mars Odyssey spacecraft's Thermal Emission Imaging System (THEMIS), taken in longer infrared wavelengths than measured by CRISM. The CRISM image samples the base of Coprates Chasma's wall, including a conspicuous horizontal band that continues along the wall for tens of kilometers to the east and west, and a topographic shelf just above that. The middle two panels show the CRISM image in visible and infrared light. In the middle left panel, the red, green, and blue image planes show brightness at 0.59, 0.53, and 0.48 microns, similar to what the human eye would see. Color variations are subdued by the presence of dust on all exposed surfaces. In the middle right panel, the red, green, and blue image planes show brightness at 2.53, 1.51, and 1.08 microns. These three infrared wavelengths are the 'usual' set

  12. Up against the wall: is yeast cell wall integrity ensured by mechanosensing in plasma membrane microdomains?

    Science.gov (United States)

    Kock, Christian; Dufrêne, Yves F; Heinisch, Jürgen J

    2015-02-01

    Yeast cell wall integrity (CWI) signaling serves as a model of the regulation of fungal cell wall synthesis and provides the basis for the development of antifungal drugs. A set of five membrane-spanning sensors (Wsc1 to Wsc3, Mid2, and Mtl1) detect cell surface stress and commence the signaling pathway upon perturbations of either the cell wall structure or the plasma membrane. We here summarize the latest advances in the structure/function relationship primarily of the Wsc1 sensor and critically review the evidence that it acts as a mechanosensor. The relevance and physiological significance of the information obtained for the function of the other CWI sensors, as well as expected future developments, are discussed.

  13. Domain walls, domain wall transformations and structural changes in permalloy nanowires when subjected to current pulses

    Energy Technology Data Exchange (ETDEWEB)

    Hempe, E.M. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ (United Kingdom); Department of Physics, Universitaet Regensburg, Universitaetsstrasse 31, 93040 Regensburg (Germany); Klaeui, M.; Krzyk, S.; Ruediger, U. [Fachbereich Physik, Universitaet Konstanz, Universitaetsstrasse 10, 78457 Konstanz (Germany); Kasama, T. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ (United Kingdom); Backes, D. [Fachbereich Physik, Universitaet Konstanz, Universitaetsstrasse 10, 78457 Konstanz (Germany); Laboratory for Micro- and Nanotechnology, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Junginger, F. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ (United Kingdom); Fachbereich Physik, Universitaet Konstanz, Universitaetsstrasse 10, 78457 Konstanz (Germany); Heyderman, L.J. [Laboratory for Micro- and Nanotechnology, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Dunin-Borkowski, R. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ (United Kingdom); Center for Electron Nanoscopy, DTU (Denmark)

    2007-12-15

    We report the direct transmission electron microscopy observation of spin structure transformations in nanoscale Permalloy zigzag wires due to Joule heating during the injection of current pulses. This heating is sufficient to overcome the energy barriers separating the different metastable domain wall spin structures. Due to the large energy barriers these are stable and observable at room temperature by off-axis electron holography and Fresnel imaging. The interaction between different domain walls is probed and the main pinning mechanism is determined to be the edge roughness. In addition to transformations, we also report on thermally assisted domain wall hopping between two pinning sites and structural changes that occur when the samples are subjected to even higher current pulses. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. Investigation of wall bounded flows using SPH and the unified semi-analytical wall boundary conditions

    CERN Document Server

    Mayrhofer, Arno; Violeau, Damien; Ferrand, Martin

    2013-01-01

    The semi-analytical wall boundary conditions present a mathematically rigorous framework to prescribe the influence of solid walls in SPH for fluid flows. In this paper they are investigated with respect to the skew-adjoint property which implies exact energy conservation. It will be shown that this property holds only in the limit of the continuous SPH approximation, whereas in the discrete SPH formulation it is only approximately true, leading to numerical noise. This noise, interpreted as form of "turbulence", is treated using an additional volume diffusion term in the continuity equation which we show is equivalent to an approximate Riemann solver. Subsequently two extensions to the boundary conditions are presented. The first dealing with a variable driving force when imposing a volume flux in a periodic flow and the second showing a generalization of the wall boundary condition to Robin type and arbitrary-order interpolation. Two modifications for free-surface flows are presented for the volume diffusio...

  15. Plant cell wall proteomics: the leadership of Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Cécile eALBENNE

    2013-05-01

    Full Text Available Plant cell wall proteins (CWPs progressively emerged as crucial components of cell walls although present in minor amounts. Cell wall polysaccharides such as pectins, hemicelluloses and cellulose represent more than 90% of primary cell wall mass, whereas hemicelluloses, cellulose and lignins are the main components of lignified secondary walls. All these polymers provide mechanical properties to cell walls, participate in cell shape and prevent water loss in aerial organs. However, cells walls need to be modified and customized during plant development and in response to environmental cues, thus contributing to plant adaptation. CWPs play essential roles in all these physiological processes and particularly in the dynamics of cell walls, which requires organization and rearrangements of polysaccharides as well as cell-to-cell communication. In the last ten years, plant cell wall proteomics has greatly contributed to a wider knowledge of CWPs. This update will deal with (i a survey of plant cell wall proteomics studies with a focus on Arabidopsis thaliana; (ii the main protein families identified and the still missing peptides; (iii the persistent issue of the non-canonical CWPs; (iv the present challenges to overcome technological bottlenecks; and (v the perspectives beyond cell wall proteomics to understand CWP functions.

  16. Origin of stationary domain wall enhanced ferroelectric susceptibility

    Science.gov (United States)

    Liu, Shi; Cohen, R. E.

    2017-03-01

    Ferroelectrics usually adopt a multidomain state with domain walls separating domains with polarization axes oriented differently. It has long been recognized that domain walls can dramatically impact the properties of ferroelectric materials. The enhancement of low-field susceptibility/permittivity under subswitching conditions is usually attributed to reversible domain wall vibration. Recent experiments highlight the stationary domain wall contribution to the dielectric susceptibility irrespective of any lateral displacements or deformations of the wall. We study the effects of domain walls on the low-field permittivity of PbTiO3 with density functional theory and molecular dynamics simulations. The static dielectric constant is calculated as a function of increasing domain wall density and temperature. We find an increase of dielectric permittivity with increasing domain wall density, which is expected to occur at a low driving field where the lateral motion of domain walls is forbidden. Real-space decomposition of the dielectric response reveals that frustrated dipoles within the finite width of the domain walls are responsible for the enhanced low-field permittivity. We explain the 100 % enhancement of the dielectric susceptibility form domain walls, which arises from the softer potential wells within them.

  17. Plant cell wall proteomics: the leadership of Arabidopsis thaliana.

    Science.gov (United States)

    Albenne, Cécile; Canut, Hervé; Jamet, Elisabeth

    2013-01-01

    Plant cell wall proteins (CWPs) progressively emerged as crucial components of cell walls although present in minor amounts. Cell wall polysaccharides such as pectins, hemicelluloses, and cellulose represent more than 90% of primary cell wall mass, whereas hemicelluloses, cellulose, and lignins are the main components of lignified secondary walls. All these polymers provide mechanical properties to cell walls, participate in cell shape and prevent water loss in aerial organs. However, cell walls need to be modified and customized during plant development and in response to environmental cues, thus contributing to plant adaptation. CWPs play essential roles in all these physiological processes and particularly in the dynamics of cell walls, which requires organization and rearrangements of polysaccharides as well as cell-to-cell communication. In the last 10 years, plant cell wall proteomics has greatly contributed to a wider knowledge of CWPs. This update will deal with (i) a survey of plant cell wall proteomics studies with a focus on Arabidopsis thaliana; (ii) the main protein families identified and the still missing peptides; (iii) the persistent issue of the non-canonical CWPs; (iv) the present challenges to overcome technological bottlenecks; and (v) the perspectives beyond cell wall proteomics to understand CWP functions.

  18. Cell Wall Heterogeneity in Root Development of Arabidopsis

    Science.gov (United States)

    Somssich, Marc; Khan, Ghazanfar Abbas; Persson, Staffan

    2016-01-01

    Plant cell walls provide stability and protection to plant cells. During growth and development the composition of cell walls changes, but provides enough strength to withstand the turgor of the cells. Hence, cell walls are highly flexible and diverse in nature. These characteristics are important during root growth, as plant roots consist of radial patterns of cells that have diverse functions and that are at different developmental stages along the growth axis. Young stem cell daughters undergo a series of rapid cell divisions, during which new cell walls are formed that are highly dynamic, and that support rapid anisotropic cell expansion. Once the cells have differentiated, the walls of specific cell types need to comply with and support different cell functions. For example, a newly formed root hair needs to be able to break through the surrounding soil, while endodermal cells modify their walls at distinct positions to form Casparian strips between them. Hence, the cell walls are modified and rebuilt while cells transit through different developmental stages. In addition, the cell walls of roots readjust to their environment to support growth and to maximize nutrient uptake. Many of these modifications are likely driven by different developmental and stress signaling pathways. However, our understanding of how such pathways affect cell wall modifications and what enzymes are involved remain largely unknown. In this review we aim to compile data linking cell wall content and re-modeling to developmental stages of root cells, and dissect how root cell walls respond to certain environmental changes. PMID:27582757

  19. Experiment and Simulation Study on the Amorphous Silicon Photovoltaic Walls

    Directory of Open Access Journals (Sweden)

    Wenjie Zhang

    2014-01-01

    Full Text Available Based on comparative study on two amorphous silicon photovoltaic walls (a-Si PV walls, the temperature distribution and the instant power were tested; and with EnergyPlus software, similar models of the walls were built to simulate annual power generation and air conditioning load. On typical sunshine day, the corresponding position temperature of nonventilated PV wall was generally 0.5~1.5°C higher than that of ventilated one, while the power generation was 0.2%~0.4% lower, which was consistent with the simulation results with a difference of 0.41% in annual energy output. As simulation results, in summer, comparing the PV walls with normal wall, the heat per unit area of these two photovoltaic walls was 5.25 kWh/m2 (nonventilated and 0.67 kWh/m2 (ventilated higher, respectively. But in winter the heat loss of nonventilated one was smaller, while ventilated PV wall was similar to normal wall. To annual energy consumption of heating and cooling, the building with ventilated PV wall and normal wall was also similar but slightly better than nonventilated one. Therefore, it is inferred that, at low latitudes, such as Zhuhai, China, air gap ventilation is suitable, while the length to thickness ratio of the air gap needs to be taken into account.

  20. Spin torque and interactions in ferromagnetic semiconductor domain walls

    Science.gov (United States)

    Golovatski, Elizabeth Ann

    The motion of domain walls due to the spin torque generated by coherent carrier transport is of considerable interest for the development of spintronic devices. We model the charge and spin transport through domain walls in ferromagnetic semiconductors for various systems. With an appropriate model Hamiltonian for the spin-dependent potential, we calculate wavefunctions inside the domain walls which are then used to calculate transmission and reflection coefficients, which are then in turn used to calculate current and spin torque. Starting with a simple approximation for the change in magnetization inside the domain wall, and ending with a sophisticated transfer matrix method, we model the common pi wall, the less-studied 2pi wall, and a system of two pi walls separated by a variable distance. We uncover an interesting width dependence on the transport properties of the domain wall. 2pi walls in particular, have definitive maximums in resistance and spin torque for certain domain wall widths that can be seen as a function of the spin mistracking in the system---when the spins are either passing straight through the domain wall (narrow walls) or adiabatically following the magnetization (wide walls), the resistance is low as transmission is high. In the intermediate region, there is room for the spins to rotate their magnetization, but not necessarily all the way through a 360 degree rotation, leading to reflection and resistance. We also calculate that there are widths for which the total velocity of a 2pi wall is greater than that of a same-sized pi wall. In the double-wall system, we model how the system reacts to changes in the separation of the domain walls. When the domain walls are far apart, they act as a spin-selective resonant double barrier, with sharp resonance peaks in the transmission profile. Brought closer and closer together, the number and sharpness of the peaks decrease, the spectrum smooths out, and the domain walls brought together have a

  1. Ideal Magnetohydrodynamics Stability Spectrum with a Resistive Wall

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S. P. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Jardin, S. C. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    2008-05-01

    We show that the eigenvalue equations describing a cylindrical ideal magnetophydrodynamicsw (MHD) plasma interacting with a thin resistive wall can be put into the standard mathematical form: Α•χ = λΒ• χ. This is accomplished by using a finite element basis for the plasma, and by adding an extra degree of freedom corresponding to the electrical current in the thin wall. The standard form allows the use of linear eigenvalue solvers, without additional interations, to compute the complete spectrum of plasma modes in the presence of a surrounding restrictive wall at arbitrary separation. We show that our method recovers standard results in the limits of (1) an infinitely resistive wall (no wall), and (2) a zero resistance wall (ideal wall).

  2. Turbine airfoil having near-wall cooling insert

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Jr., Nicholas F.; Wiebe, David J.

    2017-09-12

    A turbine airfoil is provided with at least one insert positioned in a cavity in an airfoil interior. The insert extends along a span-wise extent of the turbine airfoil and includes first and second opposite faces. A first near-wall cooling channel is defined between the first face and a pressure sidewall of an airfoil outer wall. A second near-wall cooling channel is defined between the second face and a suction sidewall of the airfoil outer wall. The insert is configured to occupy an inactive volume in the airfoil interior so as to displace a coolant flow in the cavity toward the first and second near-wall cooling channels. A locating feature engages the insert with the outer wall for supporting the insert in position. The locating feature is configured to control flow of the coolant through the first or second near-wall cooling channel.

  3. Experimental Assessment of Mechanical Night Ventilation on Inner Wall Surfaces

    DEFF Research Database (Denmark)

    Wenhui, Ji; Heiselberg, Per Kvols; Wang, Houhua;

    2016-01-01

    The cooling potential of night ventilation largely depends on the heat exchange at the internal room surfaces. During night time, increased heat transfer on a vertical wall is expected due to cool supply air that flows along the internal wall surface from the top of the wall. This paper presents ...... an experimental study of the cooling of wall surfaces in a test room by mechanical night-time ventilation. Significant improvement of indoor thermal environment is presented resulting from the enhanced internal convection heat transfer.......The cooling potential of night ventilation largely depends on the heat exchange at the internal room surfaces. During night time, increased heat transfer on a vertical wall is expected due to cool supply air that flows along the internal wall surface from the top of the wall. This paper presents...

  4. On the design of optimal compliant walls for turbulence control

    CERN Document Server

    Luhar, M; McKeon, B J

    2016-01-01

    This paper employs the theoretical framework developed by Luhar et al. (J. Fluid Mech., 768, 415-441) to consider the design of compliant walls for turbulent skin friction reduction. Specifically, the effects of simple spring-damper walls are contrasted with the effects of more complex walls incorporating tension, stiffness and anisotropy. In addition, varying mass ratios are tested to provide insight into differences between aerodynamic and hydrodynamic applications. Despite the differing physical responses, all the walls tested exhibit some important common features. First, the effect of the walls (positive or negative) is greatest at conditions close to resonance, with sharp transitions in performance across the resonant frequency or phase speed. Second, compliant walls are predicted to have a more pronounced effect on slower-moving structures because such structures generally have larger wall-pressure signatures. Third, two-dimensional (spanwise constant) structures are particularly susceptible to further...

  5. Thick domain wall spacetimes with and without reflection symmetry

    CERN Document Server

    Melfo, A; Skirzewski, A; Melfo, Alejandra; Pantoja, Nelson; Skirzewski, Aureliano

    2003-01-01

    We show that the spacetimes of domain wall solutions to the coupled Einstein-scalar field equations with a given scalar field potential fall into two classes, depending on whether or not reflection symmetry on the wall is imposed. Solutions with reflection symmetry are dynamic, while the asymmetric ones are static. Asymmetric walls are asymptotically flat on one side and reduce to the Taub spacetime on the other. Examples of asymmetric thick walls in D-dimensional spacetimes are given, and results on the thin-wall limit of the dynamic, symmetric walls are extended to the asymmetric case. The particular case of symmetric, static spacetimes is considered and a new family of solutions, including previously known BPS walls, is presented.

  6. Thinner regions of intracranial aneurysm wall correlate with regions of higher wall shear stress: a 7.0 tesla MRI

    Science.gov (United States)

    Blankena, Roos; Kleinloog, Rachel; Verweij, Bon H.; van Ooij, Pim; ten Haken, Bennie; Luijten, Peter R.; Rinkel, Gabriel J.E.; Zwanenburg, Jaco J.M.

    2016-01-01

    Purpose To develop a method for semi-quantitative wall thickness assessment on in vivo 7.0 tesla (7T) MRI images of intracranial aneurysms for studying the relation between apparent aneurysm wall thickness and wall shear stress. Materials and Methods Wall thickness was analyzed in 11 unruptured aneurysms in 9 patients, who underwent 7T MRI with a TSE based vessel wall sequence (0.8 mm isotropic resolution). A custom analysis program determined the in vivo aneurysm wall intensities, which were normalized to signal of nearby brain tissue and were used as measure for apparent wall thickness (AWT). Spatial wall thickness variation was determined as the interquartile range in AWT (the middle 50% of the AWT range). Wall shear stress was determined using phase contrast MRI (0.5 mm isotropic resolution). We performed visual and statistical comparisons (Pearson’s correlation) to study the relation between wall thickness and wall shear stress. Results 3D colored AWT maps of the aneurysms showed spatial AWT variation, which ranged from 0.07 to 0.53, with a mean variation of 0.22 (a variation of 1.0 roughly means a wall thickness variation of one voxel (0.8mm)). In all aneurysms, AWT was inversely related to WSS (mean correlation coefficient −0.35, P<0.05). Conclusions A method was developed to measure the wall thickness semi-quantitatively, using 7T MRI. An inverse correlation between wall shear stress and AWT was determined. In future studies, this non-invasive method can be used to assess spatial wall thickness variation in relation to pathophysiologic processes such as aneurysm growth and –rupture. PMID:26892986

  7. Distance-from-the-wall scaling of turbulent motions in wall-bounded flows

    Science.gov (United States)

    Baidya, R.; Philip, J.; Hutchins, N.; Monty, J. P.; Marusic, I.

    2017-02-01

    An assessment of self-similarity in the inertial sublayer is presented by considering the wall-normal velocity, in addition to the streamwise velocity component. The novelty of the current work lies in the inclusion of the second velocity component, made possible by carefully conducted subminiature ×-probe experiments to minimise the errors in measuring the wall-normal velocity. We show that not all turbulent stress quantities approach the self-similar asymptotic state at an equal rate as the Reynolds number is increased, with the Reynolds shear stress approaching faster than the streamwise normal stress. These trends are explained by the contributions from attached eddies. Furthermore, the Reynolds shear stress cospectra, through its scaling with the distance from the wall, are used to assess the wall-normal limits where self-similarity applies within the wall-bounded flow. The results are found to be consistent with the recent prediction from the work of Wei et al. ["Properties of the mean momentum balance in turbulent boundary layer, pipe and channel flows," J. Fluid Mech. 522, 303-327 (2005)], Klewicki ["Reynolds number dependence, scaling, and dynamics of turbulent boundary layers," J. Fluids Eng. 132, 094001 (2010)], and others that the self-similar region starts and ends at z+˜O (√{δ+}) and O (δ+) , respectively. Below the self-similar region, empirical evidence suggests that eddies responsible for turbulent stresses begin to exhibit distance-from-the-wall scaling at a fixed z+ location; however, they are distorted by viscous forces, which remain a leading order contribution in the mean momentum balance in the region z+≲O (√{δ+}) , and thus result in a departure from self-similarity.

  8. Relation between wall shear stress and carotid artery wall thickening MRI versus CFD

    DEFF Research Database (Denmark)

    Cibis, Merih; Potters, Wouter V.; Selwaness, Mariana

    2016-01-01

    Wall shear stress (WSS), a parameter associated with endothelial function, is calculated by computational fluid dynamics (CFD) or phase-contrast (PC) MRI measurements. Although CFD is common in WSS (WSSCFD) calculations, PC-MRI-based WSS (WSSMRI) is more favorable in population studies; since...... it is straightforward and less time consuming. However, it is not clear if WSSMRI and WSSCFD show similar associations with vascular pathology. Our aim was to test the associations between wall thickness (WT) of the carotid arteries and WSSMRI and WSSCFD. The subjects (n=14) with an asymptomatic carotid plaque who...

  9. Plant and algal cell walls: diversity and functionality.

    Science.gov (United States)

    Popper, Zoë A; Ralet, Marie-Christine; Domozych, David S

    2014-10-01

    Although plants and many algae (e.g. the Phaeophyceae, brown, and Rhodophyceae, red) are only very distantly related they are united in their possession of carbohydrate-rich cell walls, which are of integral importance being involved in many physiological processes. Furthermore,wall components have applications within food, fuel, pharmaceuticals, fibres (e.g. for textiles and paper) and building materials and have long been an active topic of research. As shown in the 27 papers in this Special Issue, as the major deposit of photosynthetically fixed carbon, and therefore energy investment, cell walls are of undisputed importance to the organisms that possess them, the photosynthetic eukaryotes ( plants and algae). The complexities of cell wall components along with their interactions with the biotic and abiotic environment are becoming increasingly revealed. The importance of plant and algal cell walls and their individual components to the function and survival of the organism, and for a number of industrial applications, are illustrated by the breadth of topics covered in this issue, which includes papers concentrating on various plants and algae, developmental stages, organs, cell wall components, and techniques. Although we acknowledge that there are many alternative ways in which the papers could be categorized (and many would fit within several topics), we have organized them as follows: (1) cell wall biosynthesis and remodelling, (2) cell wall diversity, and (3) application of new technologies to cell walls. Finally, we will consider future directions within plant cell wall research. Expansion of the industrial uses of cell walls and potentially novel uses of cell wall components are both avenues likely to direct future research activities. Fundamentally, it is the continued progression from characterization (structure, metabolism, properties and localization) of individual cell wall components through to defining their roles in almost every aspect of plant

  10. Reduced Wall Acetylation Proteins Play Vital and Distinct Roles in Cell Wall O-Acetylation in Arabidopsis

    DEFF Research Database (Denmark)

    Manabe, Yuzuki; Verhertbruggen, Yves; Gille, Sascha

    2013-01-01

    The Reduced Wall Acetylation (RWA) proteins are involved in cell wall acetylation in plants. Previously, we described a single mutant, rwa2, which has about 20% lower level of O-acetylation in leaf cell walls and no obvious growth or developmental phenotype. In this study, we generated double...... differentiation of cell types with secondary cell walls......., triple, and quadruple loss-of-function mutants of all four members of the RWA family in Arabidopsis (Arabidopsis thaliana). In contrast to rwa2, the triple and quadruple rwa mutants display severe growth phenotypes revealing the importance of wall acetylation for plant growth and development...

  11. Chest wall, lung, and pleural space trauma.

    Science.gov (United States)

    Miller, Lisa A

    2006-03-01

    Chest radiographs frequently underestimate the severity and extent of chest trauma and, in some cases, fail to detect the presence of injury. CT is more sensitive than chest radiography in the detection of pulmonary, pleural, and osseous abnormalities in the patient who has chest trauma. With the advent of multidetector CT (MDCT), high-quality multiplanar reformations are obtained easily and add to the diagnostic capabilities of MDCT. This article reviews the radiographic and CT findings of chest wall, pleural, and pulmonary injuries that are seen in the patient who has experienced blunt thoracic trauma.

  12. Distortional Modes of Thin-Walled Beams

    DEFF Research Database (Denmark)

    Jönsson, Jeppe; Andreassen, Michael Joachim

    2009-01-01

    The classic thin-walled beam theory for open and closed cross-sections can be generalized by including distortional displacement modes. The introduction of additional displacement modes leads to coupled differential equations, which seems to have prohibited the use of exact shape functions...... in the modelling of coupled torsion and distortion. However, if the distortional displacement modes are chosen as those which decouple the differential equations as in non proportionally damped modal dynamic analysis then it may be possible to use exact shape functions and perform analysis on a reduced problem...

  13. The HADES RPC inner TOF wall

    Energy Technology Data Exchange (ETDEWEB)

    Belver, D. [LABCAF-Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain); Blanco, A. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas, 3004-516 Coimbra (Portugal); Cabanelas, P. [LABCAF-Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain); Carolino, N. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas, 3004-516 Coimbra (Portugal); Castro, E. [LABCAF-Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain); Diaz, J. [Instituto de Fisica Corpuscular (CSIC-Universidad de Valencia), Valencia 46071 (Spain); Fonte, P. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas, 3004-516 Coimbra (Portugal); Instituto Superior de Engenharia de Coimbra, 3030-199 Coimbra (Portugal)], E-mail: fonte@lipc.fis.uc.pt; Garzon, J.A. [LABCAF-Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain); Gonzalez-Diaz, D. [Gesellschaft fuer Schwerionenforschung mbH (GSI), 64291 Darmstadt (Germany); Gil, A. [Instituto de Fisica Corpuscular (CSIC-Universidad de Valencia), Valencia 46071 (Spain); Koenig, W. [Gesellschaft fuer Schwerionenforschung mbH (GSI), 64291 Darmstadt (Germany); Lopes, L.; Mangiarotti, A.; Oliveira, O.; Pereira, A.; Silva, C. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas, 3004-516 Coimbra (Portugal); Sousa, C.C. [Escola Superior de Tecnologia e Gestao de Leiria, 2411-901 Leiria (Portugal); Zapata, M. [LABCAF-Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain)

    2009-05-01

    The upgraded HADES inner TOF Wall will cover a total area of 8 m{sup 2} with 1116 variable-geometry 4-gap, symmetric, timing RPCs, readout by 2232 time and charge channels. Each RPC is individually shielded for robust multi-hit performance and optimum use of the readout channels (crosstalk minimization). The double layer configuration provides a useful degree of redundancy for very accurate timing of a large fraction of all particles crossing the detector. In this paper we describe the concept of the detector, its inner structure and the multi-hit performance.

  14. Great Wall Drilling Company Operating Worldwide

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Great changes have taken place in Great Wall Drilling Company (GWDC) since the start of the new century, when GWDC conducted a profound reorganization in response to CNPC's (China National Petroleum Corporation)continuously restructuring strategy. The reorganization leads to a new top management full of youthful spirit and rich experience in international business by inviting applications for its key positions from the whole drilling sector of CNPC. Also, an effective organization structure forms with its characteristic of centering on international market development and overseas operations, aiming to raise its competitiveness internationally.

  15. Light-Shining-Through-Walls with Lasers

    OpenAIRE

    Januschek, Friederike

    2014-01-01

    Light-shining-through-walls experiments are the search experiments for weakly interacting slim particles (WISPs) with the smallest model dependence. They have the advantage that not only the detection, but also the production of the WISPs takes place in the laboratory and can thus be controlled. Using lasers is the preferred option for most of the mass region and has led to the world's most stringent laboratory limits (ALPS I) there. At CERN, OSQAR promises to surpass these and at DESY ALPS I...

  16. Wall Effects on Combustion in an Engine.

    Science.gov (United States)

    1984-05-14

    AD-A41 418 WAL EFFECT ONCOMBUSTION INAN ENGNEU) TRW SPACE AND TECHNOLOGY GROUP REDONDO BEACH CA ENGINEERIHG S c SCENCES LAB E FENDEL 14 MUY 84 NRW-S...NO. NO. NO. 11. TITLE (Include Security Claaification, Wall Effects on Combustion in an Engine (U)7 12. PERSONAL AUTHOR(S) Fendell , Francis Edward 13a...heat transfer as a determent of end-gas knock in a homo- geneous-charge engine was undertaken (Carrier, Fendell , Fink, and Feldman 1984). The last

  17. Superconductivity in single wall carbon nanotubes

    Directory of Open Access Journals (Sweden)

    H Yavari

    2009-08-01

    Full Text Available   By using Greens function method we first show that the effective interaction between two electrons mediated by plasmon exchange can become attractive which in turn can lead to superconductivity at a high critical temperature in a singl wall carbon nanotubes (SWCNT. The superconducting transition temperature Tc for the SWCNT (3,3 obtained by this mechanism agrees with the recent experimental result. We also show as the radius of SWCNT increases, plasmon frequency becomes lower and leads to lower Tc.

  18. Black hole entropy without brick walls

    CERN Document Server

    Xiang, L

    2002-01-01

    The properties of the thermal radiation are discussed by using the new equation of state density motivated by the generalized uncertainty relation in the quantum gravity. There is no burst at the last stage of the emission of a Schwarzshild black hole. When the new equation of state density is utilized to investigate the entropy of a scalar field outside the horizon of a static black hole, the divergence appearing in the brick wall model is removed, without any cutoff. The entropy proportional to the horizon area is derived from the contribution of the vicinity of the horizon.

  19. Black hole entropy without brick walls

    Science.gov (United States)

    Xiang, Li

    2002-07-01

    The properties of the thermal radiation are discussed by using the new equation of state density motivated by the generalized uncertainty relation in the quantum gravity. There is no burst at the last stage of the emission of a Schwarzschild black hole. When the new equation of state density is utilized to investigate the entropy of a scalar field outside the horizon of a static black hole, the divergence appearing in the brick wall model is removed, without any cutoff. The entropy proportional to the horizon area is derived from the contribution of the vicinity of the horizon.

  20. Localization in single-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Fuhrer, M.S.; Cohen, M.L.; Zettl, A.; Crespi, V.H.

    1998-08-15

    We demonstrate that in low temperature semiconductor-like regions the electrical resistance of single-walled carbon nanotube mats is highly nonlinear with a temperature-dependent threshold field for the onset of nonohmic conduction. The modest applied electric field completely suppresses the upturn in resistance and recovers metallic behavior over the entire temperature range 2.2K < T < 300K. The transport data indicate low-temperature localization of charge carriers arise from disorder on the nanotube bundles themselves and not from granularity caused by weak interbundle connections. The temperature-independent localization radius a is determined to be approximately 330 nm.

  1. Living Near de Sitter Bubble Walls

    OpenAIRE

    Cho, Jin-Ho; Nam, Soonkeon

    2006-01-01

    We study various bubble solutions in string/M theories obtained by double Wick rotations of (non-)extremal brane configurations. Typically, the geometry interpolates de Sitter space-time times non-compact extra-dimensional space in the near-bubble wall region and the asymptotic flat Minkowski space-time. These bubble solutions provide nice background geometries reconciling string/M theories with de Sitter space-time. For the application of these solutions to cosmology, we consider multi-bubbl...

  2. STATUS OF THE DIELECTRIC WALL ACCELERATOR

    Energy Technology Data Exchange (ETDEWEB)

    Caporaso, G J; Chen, Y; Sampayan, S; Akana, G; Anaya, R; Blackfield, D; Carroll, J; Cook, E; Falabella, S; Guethlein, G; Harris, J; Hawkins, S; Hickman, B; Holmes, C; Horner, A; Nelson, S; Paul, A; Pearson, D; Poole, B; Richardson, R; Sanders, D; Selenes, K; Sullivan, J; Wang, L; Watson, J; Weir, J

    2009-04-22

    The dielectric wall accelerator (DWA) system being developed at the Lawrence Livermore National Laboratory (LLNL) uses fast switched high voltage transmission lines to generate pulsed electric fields on the inside of a high gradient insulating (HGI) acceleration tube. High electric field gradients are achieved by the use of alternating insulators and conductors and short pulse times. The system is capable of accelerating any charge to mass ratio particle. Applications of high gradient proton and electron versions of this accelerator will be discussed. The status of the developmental new technologies that make the compact system possible will be reviewed. These include, high gradient vacuum insulators, solid dielectric materials, photoconductive switches and compact proton sources.

  3. Laparoscopic surgery in children: abdominal wall complications

    Directory of Open Access Journals (Sweden)

    Vaccaro S.

    2017-06-01

    Full Text Available Minimal invasive surgery has become the standard of care for operations involving the thoracic and abdominal cavities for all ages. Laparoscopic complications can occur as well as more invasive surgical procedures and we can classify them into non-specific and specific. Our goal is to analyze the most influential available scientific literature and to expose important and recognized advices in order to reduce these complications. We examined the mechanism, risk factors, treatment and tried to outline how to prevent two major abdominal wall complications related to laparoscopy: bleeding and port site herniation .

  4. Casimir effect in Domain Wall formation

    CERN Document Server

    Setare, M R

    2003-01-01

    The Casimir forces on two parallel plates in conformally flat de Sitter background due to conformally coupled massless scalar field satisfying mixed boundary conditions on the plates is investigated. In the general case of mixed boundary conditions formulae are derived for the vacuum expectation values of the energy-momentum tensor and vacuum forces acting on boundaries. Different cosmological constants are assumed for the space between and outside of the plates to have general results applicable to the case of domain wall formations in the early universe.

  5. Brick walls and AdS/CFT

    Science.gov (United States)

    Kay, Bernard S.; Ortíz, L.

    2014-05-01

    We discuss the relationship between the bulk-boundary correspondence in Rehren's algebraic holography (and in other `fixed-background', QFT-based, approaches to holography) and in mainstream string-theoretic `Maldacena AdS/CFT'. Especially, we contrast the understanding of black-hole entropy from the point of view of QFT in curved spacetime—in the framework of 't Hooft's `brick wall' model—with the understanding based on Maldacena AdS/CFT. We show that the brick-wall modification of a Klein-Gordon field in the Hartle-Hawking-Israel state on dimensional Schwarzschild AdS has a well-defined boundary limit with the same temperature and entropy as the brick-wall-modified bulk theory. One of our main purposes is to point out a close connection, for general AdS/CFT situations, between the puzzle raised by Arnsdorf and Smolin regarding the relationship between Rehren's algebraic holography and mainstream AdS/CFT and the puzzle embodied in the `complementarity principle' proposed by Mukohyama and Israel in their work on the brick-wall approach to black hole entropy. Working on the assumption that similar results will hold for bulk QFT other than the Klein-Gordon field and for Schwarzschild AdS in other dimensions, and recalling the first author's proposed resolution to the Mukohyama-Israel puzzle based on his `matter-gravity entanglement hypothesis', we argue that, in Maldacena AdS/CFT, the algebra of the boundary CFT is isomorphic only to a proper subalgebra of the bulk algebra, albeit (at non-zero temperature) the (GNS) Hilbert spaces of bulk and boundary theories are still the `same'—the total bulk state being pure, while the boundary state is mixed (thermal). We also argue from the finiteness of its boundary (and hence, on our assumptions, also bulk) entropy at finite temperature, that the Rehren dual of the Maldacena boundary CFT cannot itself be a QFT and must, instead, presumably be something like a string theory.

  6. Intense Magnetized Plasma-Wall Interaction

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Bruno S. [UNR; Fuelling, Stephan [UNR

    2013-11-30

    This research project studied wall-plasma interactions relevant to fusion science. Such interactions are a critical aspect of Magneto-Inertial Fusion (MIF) because flux compression by a pusher material, in particular the metal for the liner approach to MIF, involves strong eddy current heating on the surface of the pusher, and probably interactions and mixing of the pusher with the interior fuel during the time when fusion fuel is being burned. When the pusher material is a metal liner, high-energy-density conditions result in fascinating behavior. For example, "warm dense matter" is produced, for which material properties such as resistivity and opacity are not well known. In this project, the transformation into plasma of metal walls subjected to pulsed megagauss magnetic fields was studied with an experiment driven by the UNR 1 MA Zebra generator. The experiment was numerically simulated with using the MHRDR code. This simple, fundamental high-energy-density physics experiment, in a regime appropriate to MIF, has stimulated an important and fascinating comparison of numerical modeling codes and tables with experiment. In addition, we participated in developing the FRCHX experiment to compress a field-reversed-configuration (FRC) plasma with a liner, in collaboration with researchers from Air Force Research Laboratory and Los Alamos National Lab, and we helped develop diagnostics for the Plasma Liner Experiment (PLX) at LANL. Last, but not least, this project served to train students in high-energy-density physics.

  7. Treatment of posterior Wall fractures of acetabulum

    Institute of Scientific and Technical Information of China (English)

    QI Xin; LIU Jian-guo; GONG Yu-bao; YANG Chen; LI Shu-qiang; FENG Wei

    2009-01-01

    Objective: To explore the treatment methods and outcome of posterior Wall fractures of the acetabulum.Methods: The data of 31 patients(25 males and 6females,aged 19-59 years,mean:40.5 years)with posterior wall fractures of the acetabulum hospitalized in our department from 2002 to 2006 were analyzed retrospectively in this study.The types of fractures,number of fragments,combined dislocations,and sciatic nerve function were documented before admission.All the fractures were treated with open reduction and internal fixation.Based on the fracture type and site,either screws alone or reconstructive plates were used.The Patients were immobilized for an average of 12 weeks before partial weight bearing was permitted.After follow-up for 12-70months(43.6months on average),modifled Merle d‘Aubigne score was adopted to evaluate the outcomes of the operations.Results: The percentages of the excellent,good,fair and poor results were 48.4%,41.9%,6.5%,and 3.3%,respectively.with a good to excellent rate of 90.2%.Idio-pathic sciatic nerve injury occurred in only one case.Conclusions: The sciatic nerve should be routinely exposed and protected during the surgery.The type of fixation should be based on the fracture type and site.Prolonged immobilization may be helpful in improving the final outcomes.

  8. Wall mode stabilization at slow plasma rotation

    Science.gov (United States)

    Hu, Bo; Betti, Riccardo; Reimerdes, Holger; Garofalo, Andrea; Manickam, Janardhan

    2007-11-01

    Unstable pressure-driven external kink modes, which become slowly growing resistive wall modes (RWMs) in the presence of a resistive wall, can lead to tokamak plasma disruptions at high beta. It has been shown that RWMs are stabilized by fast plasma rotation (about 1-2% of the Alfv'en frequency) in experiments. Conventional theories attribute the RWM suppression to the dissipation induced by the resonances between plasma rotation and ion bounce/transit or shear Alfv'en frequencies [1]. In those theories, the kinetic effects associated with the plasma diamagnetic frequencies and trapped-particle precession drift frequencies are neglected. It has been observed in recent experiments [2,3] that the RWM suppression also occurs at very slow plasma rotation (about 0.3% of the Alfv'en frequency), where the conventional dissipation is too small to fully suppress the RWMs. Here it is shown, that the trapped-particle kinetic contribution associated with the precession motion [4] is large enough to stabilize the RWM in DIII-D at low rotation. Work supported by the US-DoE OFES. [1] A. Bondeson and M. S. Chu, Physics of Plasmas, 3,3013 (1996). [2] H. Reimerdes et al., Physical Review Letters, 98,055001 (2007). [3] M. Takechi et al., Physical Review Letters, 98,055002 (2007). [4] B. Hu and R. Betti, Physical Review Letters, 93,105002 (2004).

  9. Active control of multiple resistive wall modes

    Science.gov (United States)

    Brunsell, P. R.; Yadikin, D.; Gregoratto, D.; Paccagnella, R.; Liu, Y. Q.; Bolzonella, T.; Cecconello, M.; Drake, J. R.; Kuldkepp, M.; Manduchi, G.; Marchiori, G.; Marrelli, L.; Martin, P.; Menmuir, S.; Ortolani, S.; Rachlew, E.; Spizzo, G.; Zanca, P.

    2005-12-01

    A two-dimensional array of saddle coils at Mc poloidal and Nc toroidal positions is used on the EXTRAP T2R reversed-field pinch (Brunsell P R et al 2001 Plasma Phys. Control. Fusion 43 1457) to study active control of resistive wall modes (RWMs). Spontaneous growth of several RWMs with poloidal mode number m = 1 and different toroidal mode number n is observed experimentally, in agreement with linear MHD modelling. The measured plasma response to a controlled coil field and the plasma response computed using the linear circular cylinder MHD model are in quantitive agreement. Feedback control introduces a linear coupling of modes with toroidal mode numbers n, n' that fulfil the condition |n - n'| = Nc. Pairs of coupled unstable RWMs are present in feedback experiments with an array of Mc × Nc = 4 × 16 coils. Using intelligent shell feedback, the coupled modes are generally not controlled even though the field is suppressed at the active coils. A better suppression of coupled modes may be achieved in the case of rotating modes by using the mode control feedback scheme with individually set complex gains. In feedback with a larger array of Mc × Nc = 4 × 32 coils, the coupling effect largely disappears, and with this array, the main internal RWMs n = -11, -10, +5, +6 are all simultaneously suppressed throughout the discharge (7 8 wall times). With feedback there is a two-fold extension of the pulse length, compared to discharges without feedback.

  10. Wall Crossing from Boltzmann Black Hole Halos

    CERN Document Server

    Manschot, Jan; Sen, Ashoke

    2010-01-01

    A key question in the study of N=2 supersymmetric string or field theories is to understand the decay of BPS bound states across walls of marginal stability in the space of parameters or vacua. By representing the potentially unstable bound states as multi-centered black hole solutions in N=2 supergravity, we provide two fully general and explicit formulae for the change in the (refined) index across the wall. The first, "Higgs branch" formula relies on Reineke's results for invariants of quivers without oriented loops, specialized to the Abelian case. The second, "Coulomb branch" formula results from evaluating an integral over the classical phase space of multi-centered solutions by localization. We provide extensive evidence that these new formulae agree with each other and with the mathematical results of Kontsevich and Soibelman (KS) and Joyce and Song (JS). The main physical insight behind our results is that the Bose-Fermi statistics of individual black holes participating in the bound state can be tra...

  11. Prostanoid Receptors in the Human Vascular Wall

    Directory of Open Access Journals (Sweden)

    Xavier Norel

    2007-01-01

    Full Text Available The mechanisms involved in vascular homeostasis and disease are mostly dependent on the interactions between blood, vascular smooth muscle, and endothelial cells. There is an accumulation of evidence for the involvement of prostanoids, the arachidonic acid metabolites derived from the cyclooxygenase enzymatic pathway, in physiological and/or pathophysiological conditions. In humans, the prostanoids activate different receptors. The classical prostanoid receptors (DP, EP1–4, FP, IP, and TP are localized at the cell plasma or nuclear membrane. In addition, CRTH2 and the nuclear PPAR receptors are two other targets for prostanoids, namely, prostacyclin (PGI2 or the natural derivatives of prostaglandin D2. While there is little information on the role of CRTH2, there are many reports on PPAR activation and the consecutive expression of genes involved in the human vascular system. The role of the classical prostanoid receptors stimulated by PGI2 and thromboxane in the control of the vascular tone has been largely documented, whereas the other receptor subtypes have been overlooked. There is now increasing evidence that suggests a role of PGE2 and the EP receptor subtypes in the control of the human vascular tone and remodeling of the vascular wall. These receptors are also present on leukocytes and platelets, and they are implicated in most of the inflammatory processes within the vascular wall. Consequently, the EP receptor subtypes or isoforms would provide a novel and specific cardiovascular therapeutic approach in the near future.

  12. Wall-Crossing Invariants from Spectral Networks

    CERN Document Server

    Longhi, Pietro

    2016-01-01

    A new construction of BPS monodromies for 4d ${\\mathcal N}=2$ theories of class S is introduced. A novel feature of this construction is its manifest invariance under Kontsevich-Soibelman wall crossing, in the sense that no information on the 4d BPS spectrum is employed. The BPS monodromy is encoded by topological data of a finite graph, embedded into the UV curve $C$ of the theory. The graph arises from a degenerate limit of spectral networks, constructed at maximal intersections of walls of marginal stability in the Coulomb branch of the gauge theory. The topology of the graph, together with a notion of framing, encode equations that determine the monodromy. We develop an algorithmic technique for solving the equations, and compute the monodromy in several examples. The graph manifestly encodes the symmetries of the monodromy, providing some support for conjectural relations to specializations of the superconformal index. For $A_1$-type theories, the graphs encoding the monodromy are "dessins d'enfants" on ...

  13. Plant cell wall extensibility: connecting plant cell growth with cell wall structure, mechanics, and the action of wall-modifying enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Cosgrove, Daniel J.

    2015-11-25

    The advent of user-friendly instruments for measuring force/deflection curves of plant surfaces at high spatial resolution has resulted in a recent outpouring of reports of the ‘Young's modulus’ of plant cell walls. The stimulus for these mechanical measurements comes from biomechanical models of morphogenesis of meristems and other tissues, as well as single cells, in which cell wall stress feeds back to regulate microtubule organization, auxin transport, cellulose deposition, and future growth directionality. In this article I review the differences between elastic modulus and wall extensibility in the context of cell growth. Some of the inherent complexities, assumptions, and potential pitfalls in the interpretation of indentation force/deflection curves are discussed. Reported values of elastic moduli from surface indentation measurements appear to be 10- to >1000-fold smaller than realistic tensile elastic moduli in the plane of plant cell walls. Potential reasons for this disparity are discussed, but further work is needed to make sense of the huge range in reported values. The significance of wall stress relaxation for growth is reviewed and connected to recent advances and remaining enigmas in our concepts of how cellulose, hemicellulose, and pectins are assembled to make an extensible cell wall. A comparison of the loosening action of α-expansin and Cel12A endoglucanase is used to illustrate two different ways in which cell walls may be made more extensible and the divergent effects on wall mechanics.

  14. COMPREHENSIVE DESIGN METHOD OF FREEZE WALL AND ITS APPLICATION

    Institute of Scientific and Technical Information of China (English)

    CHENXiangsheng

    1995-01-01

    Artificially ground freezing (AGF) is one of the main methods to establish temporary support for shaft sinking in unstable water bearing strata. Domke(1915) formula based on frozen soil strength has widely been used for designing freeze wall thickness. However, it can not ensure the stability of freeze wall, nor guarantee the safety of shaft construction as frozen depth increase in unstable water bearing strata. F.A.Auld (1985, 1988) presented a design method of freeze wall, which is on the basis of strength and stability, together with deformation of freeze wall.He combined deformation of freeze wall, lining and deformation of freeze tube to set up a comprehensive design method for freeze wall. This paper, according to the practice in China, describes a comprehensive design method for deep freeze wall, considering influence of excavation rate of advance, unsupported length of freeze wall and the sump state on inward deformation of freeze wall, and the allowable pipe deformation caused by inward deformation of freeze wall. Finally, successful application of this method to the large scale coal mine-Jining No.2 Mine in Shandong Province of China, is presented.It saved much investment compared with F.A.Auld's design for the same mine on behalf of Shell Coal International.

  15. Multidimensional solid-state NMR spectroscopy of plant cell walls.

    Science.gov (United States)

    Wang, Tuo; Phyo, Pyae; Hong, Mei

    2016-09-01

    Plant biomass has become an important source of bio-renewable energy in modern society. The molecular structure of plant cell walls is difficult to characterize by most atomic-resolution techniques due to the insoluble and disordered nature of the cell wall. Solid-state NMR (SSNMR) spectroscopy is uniquely suited for studying native hydrated plant cell walls at the molecular level with chemical resolution. Significant progress has been made in the last five years to elucidate the molecular structures and interactions of cellulose and matrix polysaccharides in plant cell walls. These studies have focused on primary cell walls of growing plants in both the dicotyledonous and grass families, as represented by the model plants Arabidopsis thaliana, Brachypodium distachyon, and Zea mays. To date, these SSNMR results have shown that 1) cellulose, hemicellulose, and pectins form a single network in the primary cell wall; 2) in dicot cell walls, the protein expansin targets the hemicellulose-enriched region of the cellulose microfibril for its wall-loosening function; and 3) primary wall cellulose has polymorphic structures that are distinct from the microbial cellulose structures. This article summarizes these key findings, and points out future directions of investigation to advance our fundamental understanding of plant cell wall structure and function.

  16. Prenatal MRI evaluation of limb-body wall complex

    Energy Technology Data Exchange (ETDEWEB)

    Aguirre-Pascual, Elisa [Perelman School of Medicine at the University of Pennsylvania, Department of Radiology, The Children' s Hospital of Philadelphia, Philadelphia, PA (United States); Hospital Universitario Doce de Octubre, Department of Radiology, Madrid (Spain); Epelman, Monica [Perelman School of Medicine at the University of Pennsylvania, Department of Radiology, The Children' s Hospital of Philadelphia, Philadelphia, PA (United States); Nemours Children' s Hospital, Department of Medical Imaging, Orlando, FL (United States); Johnson, Ann M.; Chauvin, Nancy A.; Coleman, Beverly G.; Victoria, Teresa [Perelman School of Medicine at the University of Pennsylvania, Department of Radiology, The Children' s Hospital of Philadelphia, Philadelphia, PA (United States)

    2014-11-15

    The sonographic (US) features of limb-body wall complex have been well documented; however the literature regarding the findings on MRI in limb-body wall complex is scant. To characterize the prenatal MRI features of limb-body wall complex. We performed a retrospective review of all MRI scans of fetuses diagnosed with limb-body wall complex at our institution from 2001 to 2011. Fetuses without correlating US scans or follow-up information were excluded. Three pediatric radiologists blinded to the specific US findings reviewed the prenatal MRIs. Images were evaluated for the organ location and attachment, the body part affected, characterization of the body wall defect, and spinal, limb and umbilical cord abnormalities. Ten subjects met inclusion criteria. MRI was able to detect and characterize the body part affected and associated abnormalities. All fetuses had ventral wall defects, a small thorax and herniated liver and bowel. The kidneys were extracorporeal in three cases. The extruded organs were attached to the placenta or the uterine wall in all cases. Abnormal spinal curvatures of various degrees of severity were present in all cases. Eight cases had a short, uncoiled cord. Limb anomalies were present in 6 of the 10 cases. We illustrate the common fetal MRI findings of limb-body wall complex. The prenatal diagnosis of limb-body wall complex and the differentiation of this defect from treatable abdominal wall defects are crucial to providing appropriate guidance for patient counseling and management. (orig.)

  17. Dynamic load test of Arquin-designed CMU wall.

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard Pearson

    2010-02-01

    The Arquin Corporation has developed a new method of constructing CMU (concrete masonry unit) walls. This new method uses polymer spacers connected to steel wires that serve as reinforcing as well as a means of accurately placing the spacers so that the concrete block can be dry stacked. The hollows of the concrete block are then filled with grout. As part of a New Mexico Small Business Assistance Program (NMSBA), Sandia National Laboratories conducted a series of tests that dynamically loaded wall segments to compare the performance of walls constructed using the Arquin method to a more traditional method of constructing CMU walls. A total of four walls were built, two with traditional methods and two with the Arquin method. Two of the walls, one traditional and one Arquin, had every third cell filled with grout. The remaining two walls, one traditional and one Arquin, had every cell filled with grout. The walls were dynamically loaded with explosive forces. No significant difference was noted between the performance of the walls constructed by the Arquin method when compared to the walls constructed by the traditional method.

  18. Geometrical Dependence of Domain-Wall Propagation and Nucleation Fields in Magnetic-Domain-Wall Sensors

    Science.gov (United States)

    Borie, B.; Kehlberger, A.; Wahrhusen, J.; Grimm, H.; Kläui, M.

    2017-08-01

    We study the key domain-wall properties in segmented nanowire loop-based structures used in domain-wall-based sensors. The two reasons for device failure, namely, distribution of the domain-wall propagation field (depinning) and the nucleation field are determined with magneto-optical Kerr effect and giant-magnetoresistance (GMR) measurements for thousands of elements to obtain significant statistics. Single layers of Ni81 Fe19 , a complete GMR stack with Co90 Fe10 /Ni81Fe19 as a free layer, and a single layer of Co90 Fe10 are deposited and industrially patterned to determine the influence of the shape anisotropy, the magnetocrystalline anisotropy, and the fabrication processes. We show that the propagation field is influenced only slightly by the geometry but significantly by material parameters. Simulations for a realistic wire shape yield a curling-mode type of magnetization configuration close to the nucleation field. Nonetheless, we find that the domain-wall nucleation fields can be described by a typical Stoner-Wohlfarth model related to the measured geometrical parameters of the wires and fitted by considering the process parameters. The GMR effect is subsequently measured in a substantial number of devices (3000) in order to accurately gauge the variation between devices. This measurement scheme reveals a corrected upper limit to the nucleation fields of the sensors that can be exploited for fast characterization of the working elements.

  19. Wall tritium contamination as a factor in fusion-reactor wall design

    Energy Technology Data Exchange (ETDEWEB)

    Finn, P.A.; Leonard, R.A.; Rogers, M.L.; Sienkiewicz, C.J.

    1983-01-01

    The effect of either concrete or stainless steel walls on the cleanup time required to attain tritium (HTO) atmospheric levels less than or equal to 0.5 mCi/m/sup 3/ was assessed. Calculations were performed for concrete; experimental results are presented for stainless steel.

  20. Solar walls in simulation programs; Solvaegge i simuleringsprogrammer

    Energy Technology Data Exchange (ETDEWEB)

    Wittchen, K.B.

    1996-12-31

    Using the Danish Building Research`s (SBI) computer programme tsbi3 as an example, this report describes ways of implementing routines for calculating solar walls in programmes for simulating the thermal behaviour of buildings. Because of the extreme temperature conditions in a solar wall, some thermal processes used in normal building simulations can not be used. These processes are described in detail in this report. It is proved possible to describe solar walls with the same level of detail as the rest of the building model in tsbi3 and, on the basis of this description, to build and implement models with acceptable accuracy. As a result of this work, a C version of the tsbi3 programme with models for simulating solar walls has been made. With this version it is possible to simulate five different types of solar wall. The five types are denoted: mass-wall, Trombe walls, internally ventilated solar walls, double Trombe walls and solar walls for preheating ventilation air. It is now possible to simulate solar walls and their influence on the temperatures in buildings using one programme. Major changes are the introduction of a 3. order polynomial curve-fitting routine for an accurate description of solar transmission and temperature dependency of the thermal resistance of the transparent cover and the use of air-speed dependent surface resistances at all internal surfaces of the solar wall. All major processes are reused from the original version of tsbi3, i.e. conduction through the massive construction of the solar wall, shadows from local and external obstacles and airing the enclosure in front of the absorber and the solar shading devices. (ARW)

  1. Wall parameters estimation based onsupport vector regression for through wall radar sensing

    Science.gov (United States)

    Chen, Xi; Chen, Weidong

    2015-12-01

    In through wall radar sensing, the wall parameters estimation (WPE) problem has been a topic that attracts a lot of attention since the wall parameters, i.e., the permittivity and the thickness, are of crucial importance to locate the targets and to produce a well-focused image, but they are usually unknown in practice. To solve this problem, in this paper, the support vector regression (SVR), a powerful tool for regression analysis, is introduced, and its performance on WPE, provided it is used it in the regular way, is investigated. Unfortunately, it is shown that the regular use of SVR cannot afford satisfactory estimation results since the sample data used in SVR, namely the received echoes from the walls, are seriously interfered with the echoes from the targets which are located near the walls. In view of this limitation, a novel SVR-based WPE approach that consists of three stages is proposed by this paper. In the first stage, three regression functions are trained by SVR, one of which will output the estimate of the permittivity in the second stage, and the others are designed to output two instrumental variables for estimating the thickness. In the third stage, the estimate of thickness will be achieved by minimizing a predefined cost function wherein the estimated permittivity and the outputted instrumental variables are involved. The better robustness and higher estimation accuracy of the proposed approach compared to the regular use of SVR are validated by the numerical experimental results using finite-difference time-domain simulations.

  2. Airway wall stiffening increases peak wall shear stress: a fluid-structure interaction study in rigid and compliant airways.

    Science.gov (United States)

    Xia, Guohua; Tawhai, Merryn H; Hoffman, Eric A; Lin, Ching-Long

    2010-05-01

    The airflow characteristics in a computed tomography (CT) based human airway bifurcation model with rigid and compliant walls are investigated numerically. An in-house three-dimensional (3D) fluid-structure interaction (FSI) method is applied to simulate the flow at different Reynolds numbers and airway wall stiffness. As the Reynolds number increases, the airway wall deformation increases and the secondary flow becomes more prominent. It is found that the peak wall shear stress on the rigid airway wall can be five times stronger than that on the compliant airway wall. When adding tethering forces to the model, we find that these forces, which produce larger airway deformation than without tethering, lead to more skewed velocity profiles in the lower branches and further reduced wall shear stresses via a larger airway lumen. This implies that pathologic changes in the lung such as fibrosis or remodeling of the airway wall-both of which can serve to restrain airway wall motion-have the potential to increase wall shear stress and thus can form a positive feed-back loop for the development of altered flow profiles and airway remodeling. These observations are particularly interesting as we try to understand flow and structural changes seen in, for instance, asthma, emphysema, cystic fibrosis, and interstitial lung disease.

  3. Spin torque and domain wall velocity in ferromagnetic semiconductor π and 2π N'eel walls

    Science.gov (United States)

    Golovatski, E. A.; Flatté, M. E.

    2010-03-01

    The motion of a domain wall under an applied spin-polarized current[1] has interesting device applications for the development of spintronic devices. We model 2π N'eel walls (energetically favorable in thin films) in ferromagnetic semiconductors, and compare the results to those for the more-frequently studied π walls. Under coherent transport conditions, analytic solutions for spin-dependent reflection and transmission coefficients are possible[2,3]. We calculate charge resistance, spin torque, and domain wall velocity. We find the peak spin torque is more than twice as large for a 2π wall than for a π wall. We also find that the peak velocity of a 2π wall is larger than that of a π wall, but the peak velocities of 3π and 4π walls are smaller than those of both π and 2π walls. This work was supported by an ARO MURI.[4pt] [1] M. Yamanouchi, D. Chiba, F. Matsukura, and H. Ohno, Nature 428, 539 (2004).[0pt] [2] G. Vignale and M. Flatt'e, Phys. Rev. Lett. 89 (2002).[0pt] [3] D. Ralph and M. Stiles, Journal of Magnetism and Magnetic Materials 320, 1190 (2008).

  4. Hollow porous-wall glass microspheres for hydrogen storage

    Science.gov (United States)

    Heung, Leung K.; Schumacher, Ray F.; Wicks, George G.

    2010-02-23

    A porous wall hollow glass microsphere is provided having a diameter range of between 1 to 200 microns, a density of between 1.0 to 2.0 gm/cc, a porous-wall structure having wall openings defining an average pore size of between 10 to 1000 angstroms, and which contains therein a hydrogen storage material. The porous-wall structure facilitates the introduction of a hydrogen storage material into the interior of the porous wall hollow glass microsphere. In this manner, the resulting hollow glass microsphere can provide a membrane for the selective transport of hydrogen through the porous walls of the microsphere, the small pore size preventing gaseous or liquid contaminants from entering the interior of the hollow glass microsphere.

  5. Near-wall diffusion tensor of an axisymmetric colloidal particle

    CERN Document Server

    Lisicki, Maciej; Wajnryb, Eligiusz

    2016-01-01

    Hydrodynamic interactions with confining boundaries often lead to drastic changes in the diffusive behaviour of microparticles in suspensions. For axially symmetric particles, earlier numerical studies have suggested a simple form of the near-wall diffusion matrix which depends on the distance and orientation of the particle with respect to the wall, which is usually calculated numerically. In this work, we derive explicit analytical formulae for the dominant correction to the bulk diffusion tensor of an axially symmetric colloidal particle due to the presence of a nearby no-slip wall. The relative correction scales as powers of inverse wall-particle distance and its angular structure is represented by simple polynomials in sines and cosines of the particle's inclination angle to the wall. We analyse the correction for translational and rotational motion, as well as the translation-rotation coupling. Our findings provide a simple approximation to the anisotropic diffusion tensor near a wall, which completes a...

  6. Critical wall shear stress for the EHEDG test method

    DEFF Research Database (Denmark)

    Jensen, Bo Boye Busk; Friis, Alan

    2004-01-01

    In order to simulate the results of practical cleaning tests on closed processing equipment, based on wall shear stress predicted by computational fluid dynamics, a critical wall shear stress is required for that particular cleaning method. This work presents investigations that provide a critical...... wall shear stress of 3 Pa for the standardised EHEDG cleaning test method. The cleaning tests were performed on a test disc placed in a radial flowcell assay. Turbulent flow conditions were generated and the corresponding wall shear stresses were predicted from CFD simulations. Combining wall shear...... stress predictions from a simulation using the low Re k-epsilon and one using the two-layer model of Norris and Reynolds were found to produce reliable predictions compared to empirical solutions for the ideal flow case. The comparison of wall shear stress curves predicted for the real RFC...

  7. Advanced technologies for plant cell wall evolution and diversity

    DEFF Research Database (Denmark)

    Fangel, Jonatan Ulrik

    Plant cell walls consist of polysaccharides, glycoproteins and phenolic polymers interlinked together in a highly complex network. The detailed analysis of cell walls is challenging because of their inherent complexity and heterogeneity. Also, complex carbohydrates, unlike proteins and nucleotides...... probes (monoclonal antibodies mAbs and carbohydrate binding modules, CBMs) to rapidly profile polysaccharides across a sample set. During my PhD I have further developed the CoMPP technique and used it for cell wall analysis within the context of a variety of applied and fundamental projects. The data...... produced has provided new insight into cell wall evolution and biosynthesis and has contributed to the commercial development of cell wall materials. A major focus of the work has been the wide scale sampling of cell wall diversity across the plant kingdom, from unicellular algae to highly evolved...

  8. Design Aspect of including Infill Wall in RC Frame Design*

    Directory of Open Access Journals (Sweden)

    Sukrawa, M.

    2014-01-01

    Full Text Available This study compares analysis and design of a four story reinforced concrete (RC frame structure with infill wall at upper levels and open at basement level. For the analysis, the RC frame are modeled as open frame (MOF and infilled-frames using six compression only cross diagonal strut (MIF-Strut, and infilled frame using shell elements (MIF-Shell. Another model, MIF-Full, is created by adding walls at basement level of the MIF-Strut to study the effect of wall discontinuity. All three dimensional models are loaded with gravity load and quake load appropriate for South Bali region. Results show that the infilled-frame models are 4.8 times stiffer than MOF in the wall direction. Perpendicular to the wall, however, the stiffness increase is 29%. Soft storey mechanism exists in the absence of wall at basement level, regardless of reasonable column dimensions.

  9. Mean velocity scaling for compressible wall turbulence with heat transfer

    Science.gov (United States)

    Trettel, Andrew; Larsson, Johan

    2016-02-01

    The current state-of-the-art in accounting for mean property variations in compressible turbulent wall-bounded flows is the Van Driest transformation, which is inaccurate for non-adiabatic walls. An alternative transformation is derived, based on arguments about log-layer scaling and near-wall momentum conservation. The transformation is tested on supersonic turbulent channel flows and boundary layers, and it is found to produce an excellent collapse of the mean velocity profile at different Reynolds numbers, Mach numbers, and rates of wall heat transfer. In addition, the proposed transformation mathematically derives the semi-local scaling of the wall-normal coordinate and unifies the scaling of the velocity, the Reynolds stresses, and the wall-normal coordinate.

  10. A "Domain Wall" Scenario for the AdS/QCD

    CERN Document Server

    Shuryak, Edward

    2007-01-01

    We propose a scenario for bottom-up gravity dual picture of QCD-like theories, which consists of two near-AdS$_5$ domains separated by the "domain wall" at which the effective coupling relatively rapidly switches from small perturbative value at its UV side to strong at its IR side. The proposed mechanism for this jump is related to instantons, which are located at/near this wall. We further argue that in the limit of large number of colors $N_c\\to\\infty$ the "domain wall" is becoming a singularity. The instanton liquid model is reformulated in $AdS_5$ language, where instantons became point-like quark vertices on the domain wall. Among applications one may consider lowest mesons as collective vibrations of this "wall". We suggest that the "wall" can be observed in a strong-to-weak transitions of various QCD processes and provide estimate for jump magnitude for various exclusive processes.

  11. Characteristics of a bubble jet near a vertical wall

    Institute of Scientific and Technical Information of China (English)

    ZHANG A-man; YAO Xiong-liang; LI Jia

    2008-01-01

    A numerical model of a coupled bubble jet and wall was built on the assumption of potential flow and calculated by the boundary integral method. A three-dimensional computing program was then developed. Starting with the basic phenomenon of the interaction between a bubble and a wall, the dynamics of bubbles near rigid walls were studied systematically with the program. Calculated results agreed well with experimental results. The relationship between the Bjerknes effect of a wall and characteristic parameters was then studied and the calculated results of various cases were compared and discussed with the Blake criterion based on the Kelvin-impulse theory. Our analyses show that the angle of the jet's direction and the pressure on the rigid wall have a close relationship with collapse force and the bubble's characteristic parameters. From this, the application range of Blake criterion can be determined. This paper aims to provide a basis for future research on the dynamics of bubbles near a wall.

  12. Mechanical Properties of Plant Cell Walls Probed by Relaxation Spectra

    DEFF Research Database (Denmark)

    Hansen, Steen Laugesen; Ray, Peter Martin; Karlsson, Anders Ola

    2011-01-01

    Transformants and mutants with altered cell wall composition are expected to display a biomechanical phenotype due to the structural role of the cell wall. It is often quite difficult, however, to distinguish the mechanical behavior of a mutant's or transformant's cell walls from that of the wild...... type. This may be due to the plant’s ability to compensate for the wall modification or because the biophysical method that is often employed, determination of simple elastic modulus and breakstrength, lacks the resolving power necessary for detecting subtle mechanical phenotypes. Here, we apply...... a method, determination of relaxation spectra, which probes, and can separate, the viscoelastic properties of different cell wall components (i.e. those properties that depend on the elastic behavior of load-bearing wall polymers combined with viscous interactions between them). A computer program, Bayes...

  13. Mechanical Properties of Plant Cell Walls Probed by Relaxation Spectra

    DEFF Research Database (Denmark)

    Hansen, Steen Laugesen; Ray, Peter Martin; Karlsson, Anders Ola

    2011-01-01

    Transformants and mutants with altered cell wall composition are expected to display a biomechanical phenotype due to the structural role of the cell wall. It is often quite difficult, however, to distinguish the mechanical behavior of a mutant's or transformant's cell walls from that of the wild...... type. This may be due to the plant’s ability to compensate for the wall modification or because the biophysical method that is often employed, determination of simple elastic modulus and breakstrength, lacks the resolving power necessary for detecting subtle mechanical phenotypes. Here, we apply...... a method, determination of relaxation spectra, which probes, and can separate, the viscoelastic properties of different cell wall components (i.e. those properties that depend on the elastic behavior of load-bearing wall polymers combined with viscous interactions between them). A computer program, Bayes...

  14. Wall laws for viscous fluids near rough surfaces

    Directory of Open Access Journals (Sweden)

    Dalibard Anne-Laure

    2012-09-01

    Full Text Available In this paper, we review recent results on wall laws for viscous fluids near rough surfaces, of small amplitude and wavelength ε. When the surface is “genuinely rough”, the wall law at first order is the Dirichlet wall law: the fluid satisfies a “no-slip” boundary condition on the homogenized surface. We compare the various mathematical characterizations of genuine roughness, and the corresponding homogenization results. At the next order, under ergodicity properties of the roughness distribution, a Navier wall law with a slip length of order ε can be derived, that leads to better error estimates. We also discuss the relationship beween the slip length and the position of the homogenized surface. In particular, we prove that for adherent rough walls, the Navier wall law associated to the roughness does not correspond to any tangible slip.

  15. Numerical study on multiphase flows induced by wall adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook [Kookmin Univ., Seoul (Korea, Republic of)

    2012-07-15

    The present paper presents a numerical study on multiphase flows induced by wall adhesion. The continuum surface force (CSF) model with the wall adhesion boundary condition model is used for calculating the surface tension force; this model is implemented in an in house solution code (PowerCFD). The present method (code) employs an unstructured cell centered method based on a conservative pressure based finite volume method with a volume capturing method (CICSAM) in a volume of fluid (VOF) scheme for phase interface capturing. The effects of wall adhesion are then numerically simulated by using the present method for a shallow pool of water located at the bottom of a cylindrical tank with no external forces such as gravity. Two different cases are computed, one it which the water wets the wall and one in which the water does not wet the wall. It is found that the present method efficiently simulates the surface tension dominant multiphase flows induced by wall adhesion.

  16. Seismic retrofitting of timber framed walls

    Directory of Open Access Journals (Sweden)

    Gonçalves, A. M.

    2014-12-01

    Full Text Available After the 1755 earthquake that destroyed Lisbon, an innovative anti-seismic structural system was developed consisting of a timber skeleton, that included timber framed masonry walls. After more than 250 years these structures need rehabilitation to face the present demands. The research presented in this paper aimed at experimentally characterizing the cyclic behaviour of timber framed walls reinforced with three different methods, namely: (i elastic-plastic dampers on diagonal braces, (ii reinforcement of timber connections with steel plates, (iii application of a reinforced rendering. The elastic-plastic damper showed an unsymmetrical behaviour and some difficulties to implement in practice. The strengthening with reinforced render led to an initial stiffness increase but showed a limited deformation capacity. The walls with reinforcing steel plates at the timber connections showed the best behaviour in terms of strength, stiffness and energy dissipation.Después del terremoto de 1755 que destruyó Lisboa, un sistema estructural antisísmico muy innovador fue desarrollado. El sistema consistió en un esqueleto de madera, que incluyó la construcción de muros de mampostería con un entramado de madera. Transcurridos más de 250 años, estas estructuras necesitan rehabilitación para poder hacer frente a los requisitos estructurales actuales. La investigación presentada en este trabajo tiene como objetivo caracterizar experimentalmente el comportamiento cíclico de los muros con entramado de madera reforzados con tres métodos diferentes: (i amortiguadores elasto-plásticos, (ii refuerzo de las conexiones de madera con placas de acero, (iii aplicación de un mortero reforzado. El amortiguador elasto-plástico mostró un comportamiento asimétrico y algunas dificultades para aplicarlo en la práctica. El refuerzo con mortero reforzado condujo a un aumento de la rigidez inicial, pero reveló una capacidad de deformación limitada. Los muros con

  17. Stratification and thermocirculation in a solar passive water wall

    Energy Technology Data Exchange (ETDEWEB)

    Russell, L.D.; Mustafa, H.; Johnson, R.

    1981-01-01

    The solar passive water wall is a passive system which collects, stores, and distributes thermal energy for the heating of buildings. An analytical model is presented in this paper for calculation of the thermocirculation through the water wall. Representative measured data are presented for the temperature stratification which occurs in a continuous water column of a water wall 2.4 meters high. 10 refs.

  18. Strategy Guideline: Modeling Enclosure Design in Above-Grade Walls

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J. [Building Science Corporation, Westford, MA (United States); Ueno, K. [Building Science Corporation, Westford, MA (United States); Musunuru, S. [Building Science Corporation, Westford, MA (United States)

    2016-02-24

    The Strategy Guideline describes how to model and interpret results of models for above grade walls. The Measure Guideline analyzes the failure thresholds and criteria for above grade walls. A library of above-grade walls with historically successful performance was used to calibrate WUFI (Warme Und Feuchte Instationar) software models. The information is generalized for application to a broad population of houses within the limits of existing experience.

  19. Monitoring of Double Stud Wall Moisture Conditions in the Northeast

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, K. [Building Science Corporation, Westford, MA (United States)

    2015-03-01

    Double-stud walls insulated with cellulose or low-density spray foam can have R-values of 40 or higher. However, double stud walls have a higher risk of interior-sourced condensation moisture damage, when compared with high-R approaches using exterior insulating sheathing.; Moisture conditions in double stud walls were monitored in Zone 5A (Massachusetts); three double stud assemblies were compared.

  20. Kinematic framework for evaluating seismic earth pressures on retaining walls

    OpenAIRE

    Brandenberg, Scott J.; Mylonakis, George; Stewart, Jonathan P.

    2015-01-01

    © 2015 American Society of Civil Engineers.During earthquake ground shaking earth pressures on retaining structures can cyclically increase and decrease as a result of inertial forces applied to the walls and kinematic interactions between the stiff wall elements and surrounding soil. The application, based on limit equilibrium analysis, of a pseudostatic inertial force to a soil wedge behind the wall [the mechanism behind the widely-used Mononobe- Okabe (M-O) method] is a poor analogy for ei...

  1. Localization of matter and fermion resonances on double walls

    Science.gov (United States)

    Liang, Jun; Duan, Yi-Shi

    2009-10-01

    We investigate the possibility of localizing various matter fields on the double walls. For spin 0 scalar field, massless zero mode can be normalized on the double walls. However, for spin 1 vector field, the zero mode is not localized on the double walls. In the paper [C.A.S. Almeida, M.M. Ferreira Jr., A.R. Gomes, R. Casana, arxiv:arXiv:0901.3543 [hep-th

  2. Localization of matter and fermion resonances on double walls

    Energy Technology Data Exchange (ETDEWEB)

    Liang Jun, E-mail: liangjunbeijing@yahoo.com.c [Institute of Theoretical Physics, Lanzhou University, Lanzhou 730000 (China); Duan Yishi [Institute of Theoretical Physics, Lanzhou University, Lanzhou 730000 (China)

    2009-10-26

    We investigate the possibility of localizing various matter fields on the double walls. For spin 0 scalar field, massless zero mode can be normalized on the double walls. However, for spin 1 vector field, the zero mode is not localized on the double walls. In the paper [C.A.S. Almeida, M.M. Ferreira Jr., A.R. Gomes, R. Casana, (arXiv:0901.3543) [hep-th

  3. New confining force solution of QCD axion domain wall problem

    OpenAIRE

    Barr, S. M.; Kim, Jihn E.

    2014-01-01

    The serious cosmological problems created by the axion-string/axion-domain-wall system in standard axion models are alleviated by positing the existence of a new confining force. The instantons of this force can generate an axion potential that erases the axion strings long before QCD effects become important, thus preventing QCD-generated axion walls from ever appearing. Axion walls generated by the new confining force would decay so early as not to contribute significantly to the energy in ...

  4. The dorsal shell wall structure of Mesozoic ammonoids

    Directory of Open Access Journals (Sweden)

    Gregor Radtke

    2017-03-01

    Full Text Available The study of pristine preserved shells of Mesozoic Ammonoidea shows different types of construction and formation of the dorsal shell wall. We observe three major types: (i The vast majority of Ammonoidea, usually planispirally coiled, has a prismatic reduced dorsal shell wall which consists of an outer organic component (e.g., wrinkle layer, which is the first layer to be formed, and the subsequently formed dorsal inner prismatic layer. The dorsal mantle tissue suppresses the formation of the outer prismatic layer and nacreous layer. With the exception of the outer organic component, secretion of a shell wall is omitted at the aperture. A prismatic reduced dorsal shell wall is always secreted immediately after the hatching during early teleoconch formation. Due to its broad distribution in (planispiral Ammonoidea, the prismatic reduced dorsal shell wall is probably the general state. (ii Some planispirally coiled Ammonoidea have a nacreous reduced dorsal shell wall which consists of three mineralized layers: two prismatic layers (primary and secondary dorsal inner prismatic layer and an enclosed nacreous layer (secondary dorsal nacreous layer. The dorsal shell wall is omitted at the aperture and was secreted in the rear living chamber. Its layers are a continuation of an umbilical shell doubling (reinforcement by additional shell layers that extends towards the ventral crest of the preceding whorl. The nacreous reduced dorsal shell wall is formed in the process of ontogeny following a prismatic reduced dorsal shell wall. (iii Heteromorph and some planispirally coiled taxa secrete a complete dorsal shell wall which forms a continuation of the ventral and lateral shell layers. It is formed during ontogeny following a prismatic reduced dorsal shell wall or a priori. The construction is identical with the ventral and lateral shell wall, including a dorsal nacreous layer. The wide distribution of the ability to form dorsal nacre indicates that it is

  5. Schwinger pairs production in a soft-wall model

    Science.gov (United States)

    Qu, Feng; Zeng, Ding-fang

    2016-12-01

    The Schwinger pairs production rate is calculated numerically in the soft-wall model with the help of a simpler method in determining the soft-wall's position beyond which probe strings connecting the Schwinger pairs do not fall into. The critical behavior of the production rate and linear part in the middle region are both studied carefully. The latter manifests interesting new features. The results are compared with those in previous hard-wall models.

  6. Modeling of Fuel Film Cooling on Chamber Hot Wall

    Science.gov (United States)

    2014-07-01

    wall-normal Cartesian coordinate y+ = dimensionless y-spacing at wall CEA = Chemical Equilibrium with Applications (computer program) CFD ...Introduction The walls of liquid rocket engine chambers and nozzles must contain large pressures while being exposed to very high temperature gases, and...The physical and chemical phenomena involved in hydrocarbon FFC is notionally represented in Fig. 1. Hydrocarbon fuel at the fuel tank temperature

  7. A new method of preparing single-walled carbon nanotubes

    OpenAIRE

    Vivekchang, SRC; Govindaraj, A.

    2003-01-01

    A novel method of purification for single-walled carbon nanotubes, prepared by an arc-discharge method, is described. The method involves a combination of acid washing followed by high temperature hydrogen treatment to remove the metal nanoparticles and amorphous carbon present in the as-synthesized single-walled carbon nanotubes. The purified single-walled carbon nanotubes have been characterised by low-angle X-ray diffraction, electron microscopy, thermo-gravimetric analysis and Raman spect...

  8. ELASTO-PLASTIC BACK ANALYSIS OF FROZEN SOIL WALL

    Institute of Scientific and Technical Information of China (English)

    张铭; 翁家杰

    1994-01-01

    The paper briefly describes the range and methods of the research on the stability of frozen wall. Using the Back Analysis Method combining with the model test of frozen wall, the comprchcnsire study on the stability of frozen wall is firstly carried out by the authors. Finally, a new viewpointof adopting limited strain as the major criteria of stability in frozen soil cngincertng is proposed.

  9. Advanced technologies for plant cell wall evolution and diversity

    DEFF Research Database (Denmark)

    Fangel, Jonatan Ulrik

    Plant cell walls consist of polysaccharides, glycoproteins and phenolic polymers interlinked together in a highly complex network. The detailed analysis of cell walls is challenging because of their inherent complexity and heterogeneity. Also, complex carbohydrates, unlike proteins and nucleotide...... angiosperms. This analysis has enabled cell wall diversity to be placed in a phylogenetic context, and, when integrated with transcriptomic and genomic analysis has contributed to our understanding of important aspects of plant evolution....

  10. Thin-walled reinforcement lattice structure for hollow CMC buckets

    Energy Technology Data Exchange (ETDEWEB)

    de Diego, Peter

    2017-06-27

    A hollow ceramic matrix composite (CMC) turbine bucket with an internal reinforcement lattice structure has improved vibration properties and stiffness. The lattice structure is formed of thin-walled plies made of CMC. The wall structures are arranged and located according to high stress areas within the hollow bucket. After the melt infiltration process, the mandrels melt away, leaving the wall structure to become the internal lattice reinforcement structure of the bucket.

  11. Modelling Australian Red Brick and Bluestone Walls in VAPO

    Science.gov (United States)

    2013-01-01

    span. Note that internal masonry walls are also often load bearing for this UNCLASSIFIED 9 UNCLASSIFIED DSTO-TN-1155 type of floor/ ceiling slab ...compressive strength of a short column of masonry material that is mortared together in a manner representative of the wall construction. The bulk...beneath the load bearing wall on the level below. For a slab consisting of a wood deck on wood joists or concrete deck on open web steel joists, the

  12. FIWATKA - a first-wall thermal fatigue test facility

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, G.; Eggert, E. (Kernforschungszentrum Karlsruhe, Inst. fuer Reaktorbauelemente (Germany))

    1991-12-01

    The first wall of a fusion device receives from the plasma thermal loads in addition to neutron radiation, chemical and mechanical loads. To qualify a first-wall design, it needs to be tested under these loads, which is done out of the device in separate tests. The test facility described in this paper is designed for testing medium sized first-wall specimens under cyclic thermal loads. A technical description of the facility and its design limits are given. (orig.).

  13. Analysis of superheater's pipe wall overtemperature by fault tree diagnose

    Institute of Scientific and Technical Information of China (English)

    盛德仁; 任浩仁; 陈坚红; 李蔚

    2002-01-01

    After research on a 2000t/h subcritical forced-circulation balanced v entilation were applied boiler and the structure and operation of its auxiliary system builds up this heat transfer model of a superheater's pipe wall and analy ze the effect of primary factors on the overtemperature of the pipe wall. Fault tree structure was used to uncover the multiplayer logic between the overtempera ture of the superheater's pipe wall and the faults.

  14. Design studies of an aluminum first wall for INTOR

    Energy Technology Data Exchange (ETDEWEB)

    Powell, J.R.; Fillo, J.A.; Yu, W.S.; Hsieh, S.Y.; Pearlman, H.; Kramer, R.; Franz, E.; Craig, A.; Farrell, K.

    1980-01-01

    Besides the high erosion rates (including evaporation) expected for INTOR, there may also be high heat fluxes to the first wall, e.g., approx. 9 (Case I) to 24 (Case II) W/cm/sup 2/, from two sources - radiation and charge exchange neutrals. There will also be internal heat generation by neutron and gamma deposition. An aluminum first wall design is analyzed, which substantially reduces concerns about survivability of the first wall during INTOR's operating life.

  15. Schwinger pairs production in a soft-wall model

    CERN Document Server

    Qu, Feng

    2016-01-01

    The Schwinger pairs production rate is calculated numerically in the soft-wall model with the help of a simpler method in determining the soft-wall's position beyond which probe strings connecting the Schwinger pairs do not fall into. Behaviours of the production rate in both the upper critical region and the middle linear part are studied carefully. The latter exhibits interesting new features un-noted previously. All results are presented in comparisons with hard-wall models.

  16. Moisture movements in render on brick wall

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Munch, Thomas Astrup; Thorsen, Peter Schjørmann

    2003-01-01

    A three-layer render on brick wall used for building facades is studied in the laboratory. The vertical render surface is held in contact with water for 24 hours simulating driving rain while it is measured with non-destructive X-ray equipment every hour in order to follow the moisture front...... through the render and into the brick. The test specimen is placed between the source and the detector. The test specimens are all scanned before they are exposed to water. In that way the loss of counts from the dry scan to the wet scan qualitatively shows the presence of water. The results show nearly...... no penetration of water through the render and into the brick, and the results are independent of the start condition of the test specimens. Also drying experiments are performed. The results show a small difference in the rate of drying, in favour of the bricks without render....

  17. Flow over convergent and divergent wall riblets

    Energy Technology Data Exchange (ETDEWEB)

    Koeltzsch, K.; Dinkelacker, A.; Grundmann, R. [Institut fuer Luft- und Raumfahrttechnik, Technische Universitaet Dresden, 36460 Merkers (Germany)

    2002-08-01

    Fast swimming sharks have small riblets on their skin, which are assumed to improve the swimming performance of the fish. Fluid dynamic experiments in water as well as in air confirm this assumption. With riblet surfaces as compared to smooth surfaces, drag reductions up to about 10% were measured. The overall riblet pattern on sharks shows parallel riblets directed from head to tail, but besides this overall pattern fast swimming sharks have also small areas with converging riblets and others with diverging riblets. In the present study the velocity field over convergent and divergent riblet patterns is investigated by hot-wire measurements in turbulent pipe flow. Significant changes in the near wall velocity field were found. (orig.)

  18. Slow flow in channels with porous walls

    CERN Document Server

    Jensen, Kaare H

    2012-01-01

    We consider the slow flow of a viscous incompressible liquid in a channel of constant but arbitrary cross section shape, driven by non-uniform suction or injection through the porous channel walls. A similarity transformation reduces the Navier-Stokes equations to a set of coupled equations for the velocity potential in two dimensions. When the channel aspect ratio and Reynolds number are both small, the problem reduces to solving the biharmonic equation with constant forcing in two dimensions. With the relevant boundary conditions, determining the velocity field in a porous channels is thus equivalent to solving for the vertical displacement of a simply suspended thin plate under uniform load. This allows us to provide analytic solutions for flow in porous channels whose cross-section is e.g. a rectangle or an equilateral triangle, and provides a general framework for the extension of Berman flow (Journal of Applied Physics 24(9), p. 1232, 1953) to three dimensions.

  19. Wild Wall Crossing and BPS Giants

    CERN Document Server

    Galakhov, Dmitry; Mainiero, Tom; Moore, Gregory W; Neitzke, Andrew

    2013-01-01

    We show that the BPS spectrum of pure SU(3) four-dimensional super Yang-Mills with N=2 supersymmetry exhibits a surprising phenomenon: there are regions of the Coulomb branch where the growth of the BPS degeneracies with the charge is exponential. We show this using spectral networks and independently using wall-crossing formulae and quiver methods. The computations using spectral networks provide a very nontrivial example of how these networks determine the four-dimensional BPS spectrum. We comment on some physical implications of the wild spectrum: for example, exponentially many field-theoretic BPS states with large charge are gigantic. Finally, we exhibit some surprising, thus far unexplained, regularities of the BPS spectrum.

  20. Tuberculosis abscess of the chest wall.

    Science.gov (United States)

    Cataño, Juan; Perez, Jefferson

    2014-10-01

    A 42-year-old male presented in June of 2011 with nocturnal fevers, night sweats, an 8-kg weight loss, and a cutaneous right chest wall mass. In March of 2013, a computed tomographic scan of the thorax showed a 54 × 18 × 26-mm right lower lobe mass with peripheral calcifications, and in May of 2013, he was admitted for a segmental lobectomy, in which histologic examination of the pulmonary tissue revealed granulomas with multinucleated giant cells. The tissue was negative for acid-fast bacillae on Ziehl-Neelsen stain, and culture grew Mycobacterium tuberculosis. Therefore, he was started on four first-line antituberculosis medications and showed rapid symptomatic improvement.