WorldWideScience

Sample records for wackersdorf reprocessing plant

  1. International safeguards for reprocessing plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kratzer, M.; Scheinman, L.; Sievering, N.; Wonder, E.; Lipman, D.; Immerman, W.; Elliott, J.M.; Crane, F.

    1981-04-01

    Proliferation risks inherent in reprocessing show the need to employ technically effective safeguards which can detect, with a high degree of assurance and on a timely basis, the diversion of significant quantities of fissionable material. A balance must be struck between what is technically feasible and effective and what is institutionally acceptable. Purpose of this report is to examine the several technical approaches to safeguards in light of their prospective acceptability. This study defines the economic, political and institutional nature of the safeguards problem; surveys generically alternative technical approaches to international safeguards including their effectiveness and relative development; characterizes the institutional implications and uncertainties associated with the acceptance and implementation of each technical alternative; and integrates these assessments into a set of overall judgments on feasible directions for reprocessing plant safeguards systems.

  2. Safeguards instruments for Large-Scale Reprocessing Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A. [Los Alamos National Lab., NM (United States); Case, R.S.; Sonnier, C. [Sandia National Labs., Albuquerque, NM (United States)

    1993-06-01

    Between 1987 and 1992 a multi-national forum known as LASCAR (Large Scale Reprocessing Plant Safeguards) met to assist the IAEA in development of effective and efficient safeguards for large-scale reprocessing plants. The US provided considerable input for safeguards approaches and instrumentation. This paper reviews and updates instrumentation of importance in measuring plutonium and uranium in these facilities.

  3. Process monitoring in international safeguards for reprocessing plants: A demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Ehinger, M.H.

    1989-01-01

    In the period 1985--1987, the Oak Ridge National Laboratory investigated the possible role of process monitoring for international safeguards applications in fuel reprocessing plants. This activity was conducted under Task C.59, ''Review of Process Monitoring Safeguards Technology for Reprocessing Facilities'' of the US program of Technical Assistance to the International Atomic Energy Agency (IAEA) Safeguards program. The final phase was a demonstration of process monitoring applied in a prototypical reprocessing plant test facility at ORNL. This report documents the demonstration and test results. 35 figs.

  4. Equipment specifications for an electrochemical fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Hemphill, Kevin P [Los Alamos National Laboratory

    2010-01-01

    Electrochemical reprocessing is a technique used to chemically separate and dissolve the components of spent nuclear fuel, in order to produce new metal fuel. There are several different variations to electrochemical reprocessing. These variations are accounted for by both the production of different types of spent nuclear fuel, as well as different states and organizations doing research in the field. For this electrochemical reprocessing plant, the spent fuel will be in the metallurgical form, a product of fast breeder reactors, which are used in many nuclear power plants. The equipment line for this process is divided into two main categories, the fuel refining equipment and the fuel fabrication equipment. The fuel refining equipment is responsible for separating out the plutonium and uranium together, while getting rid of the minor transuranic elements and fission products. The fuel fabrication equipment will then convert this plutonium and uranium mixture into readily usable metal fuel.

  5. Technical specifications on the welding in fuel reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Karino, Motonobu; Uryu, Mitsuru; Matsui, N.; Nakazawa, Fumio; Imanishi, Makoto; Koizumi; Kazuhiko; Sugawara, Junichi; Tanaka, Hideo

    1999-04-01

    The past specifications SGN of the welding in JNC was reexamined for the reprocessing plants in order to further promote the quality control. The specification first concerns the quality of raw materials, items of the quality tests, material management, and qualification standards of the welders. It extends over details of the welding techniques, welding design, welding testings, inspection and the judgment standards. (H. Baba)

  6. Calibration of burnup monitor installed in Rokkasho Reprocessing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Oeda, Kaoru; Naito, Hirofumi; Hirota, Masanari [Japan Nuclear Fuel Co. Ltd., Rokkasho, Aomori (Japan); Natsume, Koichiro [Isogo Engineering Center, Toshiba Corporation, Yokohama, Kanagawa (Japan); Kumanomido, Hironori [Nuclear Engineering Laboratory, Toshiba Corporation, Kawasaki, Kanagawa (Japan)

    2000-06-01

    Rokkasho Reprocessing Plant uses burnup credit for criticality control at the Spent Fuel Storage Facility (SFSF) and the Dissolution Facility. A burnup monitor measures nondestructively burnup value of a spent fuel assembly and guarantees the credit for burnup. For practical reasons, a standard radiation source is not used in calibration of the burnup monitor, but the burnup values of many spent fuel assemblies are measured based on operator-declared burnup values. This paper describes the concept of burnup credit, the burnup monitor, and the calibration method. It is concluded, from the results of calibration tests, that the calibration method is valid. (author)

  7. General Atomic reprocessing pilot plant: description and results of initial testing

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    In June 1976 General Atomic completed the construction of a reprocessing head-end cold pilot plant. In the year since then, each system within the head end has been used for experiments which have qualified the designs. This report describes the equipment in the plant and summarizes the results of the initial phase of reprocessing testing.

  8. MICROBIAL TRANSFORMATIONS OF RADIONUCLIDES RELEASED FROM NUCLEAR FUEL REPROCESSING PLANTS.

    Energy Technology Data Exchange (ETDEWEB)

    FRANCIS,A.J.

    2006-10-18

    Microorganisms can affect the stability and mobility of the actinides U, Pu, Cm, Am, Np, and the fission products Tc, I, Cs, Sr, released from nuclear fuel reprocessing plants. Under appropriate conditions, microorganisms can alter the chemical speciation, solubility and sorption properties and thus could increase or decrease the concentrations of radionuclides in solution and the bioavailability. Dissolution or immobilization of radionuclides is brought about by direct enzymatic action or indirect non-enzymatic action of microorganisms. Although the physical, chemical, and geochemical processes affecting dissolution, precipitation, and mobilization of radionuclides have been investigated, we have only limited information on the effects of microbial processes. The mechanisms of microbial transformations of the major and minor actinides and the fission products under aerobic and anaerobic conditions in the presence of electron donors and acceptors are reviewed.

  9. Fully integrated safeguards and security for reprocessing plant monitoring.

    Energy Technology Data Exchange (ETDEWEB)

    Duran, Felicia Angelica; Ward, Rebecca; Cipiti, Benjamin B.; Middleton, Bobby D.

    2011-10-01

    Nuclear fuel reprocessing plants contain a wealth of plant monitoring data including material measurements, process monitoring, administrative procedures, and physical protection elements. Future facilities are moving in the direction of highly-integrated plant monitoring systems that make efficient use of the plant data to improve monitoring and reduce costs. The Separations and Safeguards Performance Model (SSPM) is an analysis tool that is used for modeling advanced monitoring systems and to determine system response under diversion scenarios. This report both describes the architecture for such a future monitoring system and present results under various diversion scenarios. Improvements made in the past year include the development of statistical tests for detecting material loss, the integration of material balance alarms to improve physical protection, and the integration of administrative procedures. The SSPM has been used to demonstrate how advanced instrumentation (as developed in the Material Protection, Accounting, and Control Technologies campaign) can benefit the overall safeguards system as well as how all instrumentation is tied into the physical protection system. This concept has the potential to greatly improve the probability of detection for both abrupt and protracted diversion of nuclear material.

  10. Calibration of burnup monitor in the Rokkasho reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Oheda, K.; Naito, H.; Hirota, M. [Japan Nuclear Fuel Ltd., Aomori (Japan); Natsume, K. [Toshiba Corp., Yokohama, Kawasaki, Kanagawa (Japan); Kumanomido, H. [Toshiba Corp., Kawasaki, Kanagawa (Japan)

    1998-07-01

    The Rokkasho Reprocessing Plant has adopted a credit for burnup in criticality control in the Spent Fuel Storage Facility (SFSF) and the Dissolution Facility. The burnup monitor system, prepared for BWR and PWR type fuel assemblies, nondestructively measures the burnup value and determines the residual U-235 enrichment in a spent fuel assembly, and criticality is controlled by the value of residual U-235 enrichment in SFSF and by the value of top 50 cm average burnup in the Dissolution Facility. The burnup monitor consists of three measurement systems; a Boss gamma-ray profile measurement system, a high resolution gamma-ray spectrometry system, and a passive neutron measurement system. The monitor sensitivity is calibrated against operator-declared burnup values through repetitive measurements of 100 spent fuel assemblies: BWR 8 X 8, PWR 14 X 14. and 17 X 17. The outline of the measurement methods, objectives of the calibration, actual calibration method, and an example of calibration performed in a demonstration experiment are presented. (author)

  11. Seismic analysis of the Nuclear Fuel Service Reprocessing Plant at West Valley, New York: documentation

    Energy Technology Data Exchange (ETDEWEB)

    Murray, R.C.; Nelson, T.A.; Davito, A.M.

    1977-04-26

    This material was generated as part of a seismic case review of the NFS Reprocessing Plant. This study is documented in UCRL-52266. The material is divided into two parts: mathematical model information, and ultimate load calculations and comparisons. (DLC)

  12. Guide to the selection, training, and licensing or certification of reprocessing plant operators. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-06-01

    The Code of Federal Regulations, Title 10, Part 55, establishes procedures and criteria for the licensing of operators, including senior operators, in ''Production and Utilization Facilities'', which includes plants for reprocessing irradiated fuel. A training guide is presented which will facilitate the licensing of operators for nuclear reprocessing plants by offering generalized descriptions of the basic principles (theory) and the unit operations (mechanics) employed in reprocessing spent fuels. In the present volume, details about the portions of a training program that are of major interest to management are presented. (JSR)

  13. General Atomic Reprocessing Pilot Plant: engineering-scale dissolution system description

    Energy Technology Data Exchange (ETDEWEB)

    Yip, H.H.

    1979-04-01

    In February 1978, a dissolver-centrifuge system was added to the cold reprocessing pilot plant at General Atomic Company, which completed the installation of an HTGR fuel head-end reprocessing pilot plant. This report describes the engineering-scale equipment in the pilot plant and summarizes the design features derived from development work performed in the last few years. The dissolver operating cycles for both thorium containing BISO and uranium containinng WAR fissile fuels are included. A continuous vertical centrifuge is used to clarify the resultant dissolver product solution. Process instrumentation and controls for the system reflect design philosophy suitable for remote operation.

  14. Materials management in an internationally safeguarded fuels reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A.; Baker, A.L.; Cobb, D.D.

    1980-04-01

    The following appendices are included: aqueous reprocessing and conversion technology, reference facilities, process design and operating features relevant to materials accounting, operator's safeguards system structure, design principles of dynamic materials accounting systems, modeling and simulation approach, optimization of measurement control, aspects of international verification problem, security and reliability of materials measurement and accounting system, estimation of in-process inventory in solvent-extraction contactors, conventional measurement techniques, near-real-time measurement techniques, isotopic correlation techniques, instrumentation available to IAEA inspectors, and integration of materials accounting and containment and surveillance. (DLC)

  15. Airborne effluent control for LMFBR fuel reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Yarbro, O.O.; Groenier, W.S.; Stephenson, M.J.

    1976-01-01

    A significant part of the LMFBR fuel reprocessing development program has been devoted to the development of efficient removal systems for the volatile fission products, including /sup 131/I, krypton, tritium, /sup 129/I, and most recently /sup 14/C. Flowsheet studies have indicated that very significant reductions of radioactive effluents can be achieved by integrating advanced effluent control systems with new concepts of containment and ventilation; however, the feasibility of such has not yet been established, nor have the economics been examined. This paper presents a flowsheet for the application of advanced containment systems to the processing of LMFBR fuels and summarizes the status and applicability of specific fission product removal systems.

  16. NO/sub x/ emissions from Hanford nuclear fuels reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Pajunen, A. L.; Dirkes, R. L.

    1978-09-15

    Operation of the existing Hanford nuclear fuel reprocessing facilities will increase the release of nitrogen oxides (NO/sub x/) to the atmosphere over present emission rates. Stack emissions from two reprocessing facilities, one waste storage facility and two coal burning power plants will contain increased concentrations of NO/sub x/. The opacity of the reprocessing facilities' emissions is predicted to periodically exceed the State and local opacity limit of twenty percent. Past measurements failed to detect differences in the ambient air NO/sub x/ concentration with and without reprocessing plant operations. Since the facilities are not presently operating, increases in the non-occupational ambient air NO/sub x/ concentration were predicted from theoretical diffusion models. Based on the calculations, the annual average ambient air NO/sub x/ concentration will increase from the present level of less than 0.004 ppM to less than 0.006 ppM at the Hanford site boundaries. The national standard for the annual mean ambient air NO/sub 2/ concentration is 0.05 ppM. Therefore, the non-occupational ambient air NO/sub x/ concentration will not be increased to significant levels by reprocessing operations in the Hanford 200 Areas.

  17. Development of Demo of Solution Measurement and Monitoring System in Reprocessing Plants

    Institute of Scientific and Technical Information of China (English)

    LIANG; Qing-lei; CHANG; Li; LI; Jing-huai; LU; Jie; TIAN; Yuan

    2015-01-01

    There are numerous unattended measurement and monitoring systems at reprocessing plants,and the most important one is the solution measurement and monitoring system,which can monitor the stable operation of the process and account the nuclear material of the entire

  18. Preliminary concepts: coordinated safeguards for materials management in a thorium--uranium fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A.; Barnes, J.W.; Dayem, H.A.; Dietz, R.J.; Shipley, J.P.

    1978-10-01

    This report addresses preliminary concepts for coordinated safeguards materials management in a typical generic thorium--uranium-fueled light-water reactor (LWR) fuels reprocessing plant. The reference facility is designed to recover thorium and uranium from first-generation (denatured /sup 235/U) startup fuels, first-recycle and equilibrium (denatured /sup 233/U) thorium--uranium LWR fuels, and to recover the plutonium generated in the /sup 238/U denaturant as well. 12 figures, 3 tables.

  19. Lessons Learned in International Safeguards - Implementation of Safeguards at the Rokkasho Reprocessing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Ehinger, Michael H [ORNL; Johnson, Shirley [Tucker Creek Consulting

    2010-02-01

    The focus of this report is lessons learned at the Rokkasho Reprocessing Plant (RRP). However, the subject of lessons learned for application of international safeguards at reprocessing plants includes a cumulative history of inspections starting at the West Valley (New York, U.S.A.) reprocessing plant in 1969 and proceeding through all of the efforts over the years. The RRP is the latest and most challenging application the International Atomic Energy Agency has faced. In many ways the challenges have remained the same, timely inspection and evaluation with limited inspector resources, with the continuing realization that planning and preparations can never start early enough in the life cycle of a facility. Lessons learned over the years have involved the challenges of using ongoing advances in technology and dealing with facilities with increased throughput and continuous operation. This report will begin with a review of historical developments and lessons learned. This will provide a basis for a discussion of the experiences and lessons learned from the implementation of international safeguards at RRP.

  20. Krypton-85 health risk assessment for a nuclear fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Mellinger, P.J.; Brackenbush, L.W.; Tanner, J.E.; Gilbert, E.S.

    1984-08-01

    The risks involved in the routine release of /sup 85/Kr from nuclear fuel reprocessing operations to the environment were compared to those resulting from the capture and storage of /sup 85/Kr. Instead of releasing the /sup 85/Kr to the environment when fuel is reprocessed, it can be captured, immobilized and stored. Two alternative methods of capturing /sup 85/Kr (cryogenic distillation and fluorocarbon absorption) and one method of immobilizing the captured gas (ion implantation/sputtering) were theoretically incorporated into a representative fuel reprocessing plant, the Barnwell Nuclear Fuel Plant, even though there are no known plans to start up this facility. Given the uncertainties in the models used to generate lifetime risk numbers (0.02 to 0.027 radiation induced fatal cancers expected in the occupational workforce and 0.017 fatal cancers in the general population), the differences in total risks for the three situations, (i.e., no-capture and two-capture alternatives) cannot be considered meaningful. It is possible that no risks would occur from any of the three situations. There is certainly no reason to conclude that risks from /sup 85/Kr routinely released to the environment are greater than those that would result from the other two situations considered. Present regulations mandate recovery and disposal of /sup 85/Kr from the off gases of a facility reprocessing spent fuel from commercial sources. Because of the lack of a clear-cut indication that recovery woud be beneficial, it does not seem prudent to burden the facilities with a requirement for /sup 85/Kr recovery, at least until operating experience demonstrates the incentive. The probable high aging of the early fuel to be processed and the higher dose resulting from the release of the unregulated /sup 3/H and /sup 14/C also encourage delaying implementation of the /sup 85/Kr recovery in the early plants.

  1. Evaluation and development plan of NRTA measurement methods for the Rokkasho Reprocessing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Li, T.K.; Hakkila, E.A.; Flosterbuer, S.F. [and others

    1995-08-01

    Near-real-time accounting (NRTA) has been proposed as a safeguards method at the Rokkasho Reprocessing Plant (RRP), a large-scale commercial boiling water and pressurized water reactors spent-fuel reprocessing facility. NRTA for RRP requires material balance closures every month. To develop a more effective and practical NRTA system for RRP, we have evaluated NRTA measurement techniques and systems that might be implemented in both the main process and the co-denitration process areas at RRP to analyze the concentrations of plutonium in solutions and mixed oxide powder. Based on the comparative evaluation, including performance, reliability, design criteria, operation methods, maintenance requirements, and estimated costs for each possible measurement method, recommendations for development were formulated. This paper discusses the evaluations and reports on the recommendation of the NRTA development plan for potential implementation at RRP.

  2. Historic American Engineering Record, Idaho National Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex

    Energy Technology Data Exchange (ETDEWEB)

    Susan Stacy; Julie Braun

    2006-12-01

    Just as automobiles need fuel to operate, so do nuclear reactors. When fossil fuels such as gasoline are burned to power an automobile, they are consumed immediately and nearly completely in the process. When the fuel is gone, energy production stops. Nuclear reactors are incapable of achieving this near complete burn-up because as the fuel (uranium) that powers them is burned through the process of nuclear fission, a variety of other elements are also created and become intimately associated with the uranium. Because they absorb neutrons, which energize the fission process, these accumulating fission products eventually poison the fuel by stopping the production of energy from it. The fission products may also damage the structural integrity of the fuel elements. Even though the uranium fuel is still present, sometimes in significant quantities, it is unburnable and will not power a reactor unless it is separated from the neutron-absorbing fission products by a method called fuel reprocessing. Construction of the Fuel Reprocessing Complex at the Chem Plant started in 1950 with the Bechtel Corporation serving as construction contractor and American Cyanamid Company as operating contractor. Although the Foster Wheeler Corporation assumed responsibility for the detailed working design of the overall plant, scientists at Oak Ridge designed all of the equipment that would be employed in the uranium separations process. After three years of construction activity and extensive testing, the plant was ready to handle its first load of irradiated fuel.

  3. Initiating events study of the first extraction cycle process in a model reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Renze; Zhang, Jian Gang; Zhuang, Dajie; Feng, Zong Yang [China Institute for Radiation Protection, Taiyuan (China)

    2016-06-15

    Definition and grouping of initiating events (IEs) are important basics for probabilistic safety assessment (PSA). An IE in a spent fuel reprocessing plant (SFRP) is an event that probably leads to the release of dangerous material to jeopardize workers, public and environment. The main difference between SFRPs and nuclear power plants (NPPs) is that hazard materials spread diffusely in a SFRP and radioactive material is just one kind of hazard material. Since the research on IEs for NPPs is in-depth around the world, there are several general methods to identify IEs: reference of lists in existence, review of experience feedback, qualitative analysis method, and deductive analysis method. While failure mode and effect analysis (FMEA) is an important qualitative analysis method, master logic diagram (MLD) method is the deductive analysis method. IE identification in SFRPs should be consulted with the experience of NPPs, however the differences between SFRPs and NPPs should be considered seriously. The plutonium uranium reduction extraction (Purex) process is adopted by the technics in a model reprocessing plant. The first extraction cycle (FEC) is the pivotal process in the Purex process. Whether the FEC can function safely and steadily would directly influence the production process of the whole plant-production quality. Important facilities of the FEC are installed in the equipment cells (ECs). In this work, IEs in the FEC process were identified and categorized by FMEA and MLD two methods, based on the fact that ECs are containments in the plant. The results show that only two ECs in the FEC do not need to be concerned particularly with safety problems, and criticality, fire and red oil explosion are IEs which should be emphatically analyzed. The results are accordant with the references.

  4. Comparing Early to Middle Miocene floras and probable vegetation types of Oberdorf N Voitsberg (Austria), Bohemia (Czech Republic), and Wackersdorf (Germany).

    Science.gov (United States)

    Kovar-Eder, J; Kvacek, Z; Meller, B

    2001-03-01

    The Early Miocene vegetation of western Styria, Austria, is reconstructed on the basis of detailed investigations of leaves and diaspores from the mining area Oberdorf N Voitsberg. In this paper, the flora and probable vegetation are compared with other assemblages of similar age from the Czech Republic and Germany to elucidate the diversity of wetland and mesophytic plant communities. The floristic composition and the vegetational units represented in Oberdorf are compared to the middle part of the Most Formation (M Most Fm), Cypris Shale, Mydlovary Formation (Mydlovary Fm) of Bohemia, and the Wackersdorf mining area of Bavaria. Among these sites, Oberdorf is extremely poor in hydrophytes and reed-like monocotyledons, indicating rare pond-like habitats as well as possibly more closed swamp forest conditions than, e.g. in the M Most Fm. In Oberdorf, relatively high pH-values in the lignite-forming swamps and the possible scarcity of acidic, nutrient-poor (sandy) soils have probably influenced the floristic composition of the azonal communities. The peat-forming associations in all regions share the abundance of Glyptostrobus europaeus. However, distinct differences in the accompanying elements, such as Taxodium dubium (present and abundant only in the M Most Fm) indicate even stronger floristic variability of Early(/Middle) Miocene peat-forming and riparian plant communities than previously expected. The virtual absence of Pinus, Engelhardia, Comptonia, and probably also of Quercus kubinyii/Quercus drymeja in the megafossil record of Oberdorf can possibly be explained by the edaphic conditions. The abundance of Sequoia abietina (absent in all the other compared sites), which we assign to riparian (and mesophytic) forests in Oberdorf, may have been favoured by rich alluvial soils.In the mesophytic associations, thermophilous elements of the Lauraceae, Mastixiaceae, Symplocaceae, and Rutaceae are diverse. Usually they include Trigonobalanopsis rhamnoides

  5. Conceptual designs of NDA instruments for the NRTA system at the Rokkasho Reprocessing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Li, T.K.; Klosterbuer, S.F.; Menlove, H.O. [Los Alamos National Lab., NM (United States). Safeguards Science and Technology Group] [and others

    1996-09-01

    The authors are studying conceptual designs of selected nondestructive assay (NDA) instruments for the near-real-time accounting system at the rokkasho Reprocessing Plant (RRP) of Japan Nuclear Fuel Limited (JNFL). The JNFL RRP is a large-scale commercial reprocessing facility for spent fuel from boiling-water and pressurized-water reactors. The facility comprises two major components: the main process area to separate and produce purified plutonium nitrate and uranyl nitrate from irradiated reactor spent fuels, and the co-denitration process area to combine and convert the plutonium nitrate and uranyl nitrate into mixed oxide (MOX). The selected NDA instruments for conceptual design studies are the MOX-product canister counter, holdup measurement systems for calcination and reduction furnaces and for blenders in the co-denitration process, the isotope dilution gamma-ray spectrometer for the spent fuel dissolver solution, and unattended verification systems. For more effective and practical safeguards and material control and accounting at RRP, the authors are also studying the conceptual design for the UO{sub 3} large-barrel counter. This paper discusses the state-of-the-art NDA conceptual design and research and development activities for the above instruments.

  6. Model of iodine transport and reaction kinetics in a nuclear fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Davis, W. Jr.

    1977-05-01

    A model is presented to describe the time-dependent flow and retention of stable iodine isotopes and the decay of /sup 131/I in a nuclear fuel reprocessing plant. The plant consists of 16 units of equipment such as a voloxidizer or graphite burner, fuel dissolver, solvent extractors, storage tanks, vaporizers, primary iodine sorbers, and silver zeolite. The rate of accumulation of bulk and radioactive iodine in these units and in the environment is described using 19 differential equations. Reasonable time-dependence of iodine retention factors (RFs) by the plant were calculated. RFs for a new plant in excess of 10/sup 6/ for stable iodine and /sup 129/I decrease to the range of 10/sup 3/ to 10/sup 2/ as plant operating times exceed 50 to 100 days. The RFs for /sup 131/I also decrease initially, for a period of approximately 10 days, but then increase by several orders of magnitude due to radioactive decay and isotopic exchange. Generally, the RFs for /sup 131/I exceed those for stable iodine by factors of 10/sup 4/ or more. 19 references, 13 figures, 2 tables. (DLC)

  7. Control of radio-iodine at the German reprocessing plant WAK during operation and after shutdown

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, F.J.; Herrmann, B.; Kuhn, K.D. [Wiederaufarbeitungsanlage Karlsruhe (Germany)] [and others

    1997-08-01

    During 20 years of operation 207 metric tons of oxide fuel from nuclear power reactors with 19 kg of iodine-129 had been reprocessed in the WAK plant near Karlsruhe. In January 1991 the WAK Plant was shut down. During operation iodine releases of the plant as well as the iodine distribution over the liquid and gaseous process streams had been determined. Most of the iodine is evolved into the dissolver off-gas in volatile form. The remainder is dispersed over many aqueous, organic and especially gaseous process and waste streams. After shut down of the plant in January 1991, iodine measurements in the off-gas streams have been continued up to now. Whereas the iodine-129 concentration in the dissolver off-gas dropped during six months after shutdown by three orders of magnitude, the iodine concentrations in the vessel ventilation system of the PUREX process and the cell vent system decreased only by a factor of 10 during the same period. Iodine-129 releases of the liquid high active waste storage tanks did not decrease distinctly. The removal efficiencies of the silver impregnated iodine filters in the different off-gas streams of the WAK plant depend on the iodine concentration in the off-gas. The reason of the observed dependence of the DF on the iodine-129 concentration might be due to the presence of organic iodine compounds which are difficult to remove. 13 refs., 3 figs.

  8. Calibration of burnup monitor of spent nuclear fuel installed at Rokkasho reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Oeda, Kaoru; Matoba, Masaru; Wakabayashi, Genichiro [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Naito, Hirofumi; Hirota, Masanari [Nuclear Fuel Industries Ltd., Tokyo (Japan); Morizaki, Hidetoshi; Kumanomido, Hironori; Natsume, Koichiro [Toshiba Corp., Tokyo (Japan)

    2001-05-01

    The spent nuclear fuel storage pool of Rokkasho reprocessing plant adopts the burnup credit' conception. Spent fuel assemblies are measured every one by one, by burnup monitors, and stored to a storage rack which is designed with specified residual enrichment. For nuclear criticality control, it is necessary for the burnup monitor that the measured value includes a kind of margin, which consists of errors of the monitor. In this paper, we describe the error of the burnup monitors, and the way of taking of the margin. From the result of calibration of the burnup monitor carried out from July through November, 1999, we describe that the way of taking of the margin is validated. And comments about possibility of error reduction are remarked. (author)

  9. Task 5c: measurement and instrumentation under subsystem design of the LLL safeguard material control program. [For fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-31

    A product survey was conducted of all security products currently available on the market. Documentation is presented of the survey and a printout of the data is included. A general description is given of new but recommended instrumentation and security devices for application to fuel reprocessing plants. Security systems and hardware recommended for development, assembly, and testing are discussed briefly. (DLC)

  10. Iodine Pathways and Off-Gas Stream Characteristics for Aqueous Reprocessing Plants – A Literature Survey and Assessment

    Energy Technology Data Exchange (ETDEWEB)

    R. T. Jubin; D. M. Strachan; N. R. Soelberg

    2013-09-01

    Used nuclear fuel is currently being reprocessed in only a few countries, notably France, England, Japan, and Russia. The need to control emissions of the gaseous radionuclides to the air during nuclear fuel reprocessing has already been reported for the entire plant. But since the gaseous radionuclides can partition to various different reprocessing off-gas streams, for example, from the head end, dissolver, vessel, cell, and melter, an understanding of each of these streams is critical. These off-gas streams have different flow rates and compositions and could have different gaseous radionuclide control requirements, depending on how the gaseous radionuclides partition. This report reviews the available literature to summarize specific engineering data on the flow rates, forms of the volatile radionuclides in off-gas streams, distributions of these radionuclides in these streams, and temperatures of these streams. This document contains an extensive bibliography of the information contained in the open literature.

  11. Technology, safety, and costs of decommissioning a reference nuclear fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.; Jenkins, C.E.; Rhoads, R.E.

    1977-09-01

    Safety and cost information were developed for the conceptual decommissioning of a fuel reprocessing plant with characteristics similar to the Barnwell Nuclear Fuel Plant. The main process building, spent fuel receiving and storage station, liquid radioactive waste storage tank system, and a conceptual high-level waste-solidification facility were postulated to be decommissioned. The plant was conceptually decommissioned to three decommissioning states or modes; layaway, protective storage, and dismantlement. Assuming favorable work performance, the elapsed time required to perform the decommissioning work in each mode following plant shutdown was estimated to be 2.4 years for layaway, 2.7 years for protective storage, and 5.2 years for dismantlement. In addition to these times, approximately 2 years of planning and preparation are required before plant shutdown. Costs, in constant 1975 dollars, for decommissioning were estimated to be $18 million for layaway, $19 million for protective storage and $58 million for dismantlement. Maintenance and surveillance costs were estimated to be $680,000 per year after layaway and $140,000 per year after protective storage. The combination mode of protective storage followed by dismantlement deferred for 10, 30, and 100 years was estimated to cost $64 million, $67 million and $77 million, respectively, in nondiscounted total 1975 dollars. Present values of these costs give reduced costs as dismantlement is deferred. Safety analyses indicate that radiological and nonradiological safety impacts from decommissioning activities should be small. The 50-year radiation dose commitment to the members of the public from airborne releases from normal decommissioning activities were estimated to be less than 11 man-rem.

  12. Adequacy of radioiodine control and monitoring at nuclear fuels reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Scheele, R.D.; Burger, L.L.; Soldat, J.K.

    1984-06-01

    The present backlog of irradiated reactor fuel leads to projections that no fuel out of the reactor less than 10 years need be reprocessed prior to the year 2000. The only radioiodine present in such aged fuel is /sup 129/I (half-life 1.6 x 10/sup 7/ y). The /sup 131/I initially present in the fuel decays to insignificance in the first few hundred days post-reactor. The /sup 129/I content of irradiated fuel is about 1 Ci per gigawatt-year of electricity generated (Ci/GW(e)-y). The US EPA has specified, in 40 CFR 190, a release limit for /sup 129/I of 5 mCi/GW(e)-y. Thus a retention factor (RF) of 200 for /sup 129/I at the fuel reprocessing plant (FRP) is required. Experience indicates that RF values obtained under actual FRP operating conditions can average as little as 10% of experimentally determined RF values. Therefore processes theoretically capable of achieving RF values of up to 10/sup 4/ have been investigated. The US EPA has also specified in 40 CFR 90 a thyroid dose limit of 75 mrem/y for a member of the general public. This dose limit could be readily met at a typical FRP site with an RF value of about 10 or less. Therefore, the limit of 5 mCi/GW(e)-y is more restrictive than the thyroid dose limit for /sup 129/I. The absence of /sup 131/I in effluents from processing of aged fuels makes analysis of /sup 129/I somewhat easier. However, in-line, real-time monitoring for /sup 129/I in FRP gas streams is currently not feasible. Moisture, chemicals, and other radioactive fission products interfere with in-plant measurements. Samples collected over several days must be taken to a laboratory for /sup 129/I analysis. Measurement techniques currently in use or under investigation include neutron activation analysis, scintillation counting, mass spectroscopy, and gas chromatography coupled with electron capture detection. 26 references, 3 figures, 7 tables.

  13. Thermal decomposition of organic solvent with nitric acid in nuclear fuel reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Tadao; Nishio, Gunji; Takada, Junichi; Tukamoto, Michio; Watanabe, Kouji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Miyata, Sadaichirou

    1995-02-01

    Since a thermal decomposition of organic solvent containing TBP (tributyl phosphate) with nitric acid and heavy metal nitrates is an exothermic reaction, it is possible to cause an explosive decomposition of TBP-complex materials formed by a nitration between the solvent and nitric acid, if the solvent involving TBP-complex is heated upto a thermal limit in an evaporator to concentrate a fuel liquid solution from the extraction process in the reprocessing plant. In JAERI, the demonstration test for explosive decomposition of TBP-complex by the nitration was performed to elucidate the safety margin of the evaporator in the event of hypothetical explosion under auspices of the Science and Technology Agency. The demonstration test was carried out by heating TBP/n-dodecane solvent mixed with nitric acid and uranium nitrate. In the test, the thermal decomposition behavior of the solvent was examined, and also a kinematic reaction constant and a heat formation of the TBP-complex decomposition were measured by the test. In the paper, a safety analysis of a model evaporator was conducted during accidental conditions under the explosive decomposition of the solvent. (author).

  14. Atmospheric tritium concentrations under influence of AREVA NC La Hague reprocessing plant (France) and background levels.

    Science.gov (United States)

    Connan, O; Hébert, D; Solier, L; Maro, D; Pellerin, G; Voiseux, C; Lamotte, M; Laguionie, P

    2017-10-01

    In-air tritium measurements were conducted around the AREVA NC La Hague reprocessing plant, as well as on other sites that are not impacted by the nuclear industry in northwest of France. The results indicate that the dominant tritium form around the AREVA site is HT (86%). HT and HTO levels are lower than 5 and 1 Bq. m(-3) for hourly samples taken in the plume. No tritiated organic molecules (TOM) were detected. 26 measurement campaigns were performed and links were established between near-field (85)Kr, HT and HTO activities. Environmental measurements are in line with those taken at the discharge stack, and tend to demonstrate that there are no rapid changes in the tritium forms released. Out of the influence of any nuclear activities, the levels measured were below 13 mBq.m(-3) for HT and 5 mBq.m(-3) for HTO (<0.5 Bq. L(-1)). HTO level in air seems to be influenced by HTO activities in surrounding seawater. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Corrosion circumstance in the Tokai Reprocessing Plant and evaluation of the corrosion rate

    Energy Technology Data Exchange (ETDEWEB)

    Maki, Akira [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai Reprocessing Center, Tokai, Ibaraki (Japan)

    2002-03-01

    In the reprocessing plant, corrosive circumstances arise, because the major equipment contains a high concentration of the metal ions that originate from the fission products. They are also equipped in the various concentrations of nitric acid and various temperatures. Based on failed experiments due to corrosion, repairing the equipment and exchanging materials, the corrosion rate of stainless steel containing Nb was measured over 1 mm/yr in the heat transfer surface of the dissolver. Pin-holes in the weld zone of the heat conduction surface of the dissolver and the acid recovery evaporator were observed. Although the corrosion rate of Ti-5Ta in the vapor zone of the plutonium solution evaporator reached 0.1 - 0.3 mm/yr, no local attacks were confirmed. On the other hand, the corrosion of Ti-5Ta was not observed in the acid recovery evaporator. This report presents the survey result of the corrosion equipment and an outline of the corrosion tests, with the wall thickness measurement result obtained as a soundness confirmation of the equipment. (author)

  16. Safety demonstration tests on pressure rise in ventilation system and blower integrity of a fuel-reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Takada, Junichi; Suzuki, Motoe; Tsukamoto, Michio; Koike, Tadao; Nishio, Gunji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-12-01

    In JAERI, the demonstration test was carried out as a part of safety researches of the fuel-reprocessing plant using a large-scale facility consist of cells, ducts, dumpers, HEPA filters and a blower, when an explosive burning due to a rapid reaction of thermal decomposition for solvent/nitric acid occurs in a cell of the reprocessing plant. In the demonstration test, pressure response propagating through the facility was measured under a blowing of air from a pressurized tank into the cell in the facility to elucidate an influence of pressure rise in the ventilation system. Consequently, effective pressure decrease in the facility was given by a configuration of cells and ducts in the facility. In the test, transient responses of HEPA filters and the blower by the blowing of air were also measured to confirm the integrity. So that, it is confirmed that HEPA filters and the blower under pressure loading were sufficient to maintain the integrity. The content described in this report will contribute to safety assessment of the ventilation system in the event of explosive burning in the reprocessing plant. (author)

  17. Considerations affecting deep-well disposal of tritium-bearing low-level aqueous waste from nuclear fuel reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Trevorrow, L. E.; Warner, D. L.; Steindler, M. J.

    1977-03-01

    Present concepts of disposal of low-level aqueous wastes (LLAW) that contain much of the fission-product tritium from light water reactors involve dispersal to the atmosphere or to surface streams at fuel reprocessing plants. These concepts have been challenged in recent years. Deep-well injection of low-level aqueous wastes, an alternative to biospheric dispersal, is the subject of this presentation. Many factors must be considered in assessing its feasibility, including technology, costs, environmental impact, legal and regulatory constraints, and siting. Examination of these factors indicates that the technology of deep-well injection, extensively developed for other industrial wastes, would require little innovation before application to low-level aqueous wastes. Costs would be low, of the order of magnitude of 10/sup -4/ mill/kWh. The environmental impact of normal deep-well disposal would be small, compared with dispersal to the atmosphere or to surface streams; abnormal operation would not be expected to produce catastrophic results. Geologically suitable sites are abundant in the U.S., but a well would best be co-located with the fuel-reprocessing plant where the LLAW is produced. Legal and regulatory constraints now being developed will be the most important determinants of the feasibility of applying the method.

  18. Removal efficiency of silver impregnated filter materials and performance of iodie filters in the off-gas of the Karlsruhe reprocessing plant WAK

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, F.J.; Herrmann, B.; Hoeflich, V. [Wiederaufarbeitungsanlage Karlsruhe (Germany)] [and others

    1997-08-01

    An almost quantitative retention of iodine is required in reprocessing plants. For the iodine removal in the off-gas streams of a reprocessing plant various sorption materials had been tested under realistic conditions in the Karlsruhe reprocessing plant WAK in cooperation with the Karlsruhe research center FZK. The laboratory results achieved with different iodine sorption materials justified long time performance tests in the WAK Plant. Technical iodine filters and sorption materials for measurements of iodine had been tested from 1972 through 1992. This paper gives an overview over the most important results, Extended laboratory, pilot plant, hot cell and plant experiences have been performed concerning the behavior and the distribution of iodine-129 in chemical processing plants. In a conventional reprocessing plant for power reactor fuel, the bulk of iodine-129 and iodine-127 is evolved into the dissolver off-gas. The remainder is dispersed over many aqueous, organic and gaseous process and waste streams of the plant. Iodine filters with silver nitrate impregnated silica were installed in the dissolver off-gas of the Karlsruhe reprocessing plant WAK in 1975 and in two vessel vent systems in 1988. The aim of the Karlsruhe iodine research program was an almost quantitative evolution of the iodine during the dissolution process to remove as much iodine with the solid bed filters as possible. After shut down of the WAK plant in December 1990 the removal efficiency of the iodine filters at low iodine concentrations had been investigated during the following years. 12 refs., 2 figs., 2 tabs.

  19. Report on the NGS3 Working Group on Safeguards by Design For Aqueous Reprocessing Plants

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Shirley J.; Ehinger, Michael; Schanfein, Mark

    2011-02-01

    The objective of the Working Group on SBD for Aqueous Reprocessing Facilities was to provide recommendations, for facility operators and designers, which would aid in the coordination and integration of nuclear material accountancy and the safeguards requirements of all concerned parties - operators, state/regional authorities, and the IAEA. The recommendations, which are to be provided to the IAEA, are intended to assist in optimizing facility design and operating parameters to ensure the safeguardability of the facility while minimizing impact on the operations. The one day Working Group session addressed a wide range of design and operating topics.

  20. Development of Online Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes.

    Science.gov (United States)

    Casella, Amanda J; Ahlers, Laura R H; Campbell, Emily L; Levitskaia, Tatiana G; Peterson, James M; Smith, Frances N; Bryan, Samuel A

    2015-05-19

    In nuclear fuel reprocessing, separating trivalent minor actinides and lanthanide fission products is extremely challenging and often necessitates tight pH control in TALSPEAK (Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes) separations. In TALSPEAK and similar advanced processes, aqueous pH is one of the most important factors governing the partitioning of lanthanides and actinides between an aqueous phase containing a polyaminopolycarboxylate complexing agent and a weak carboxylic acid buffer and an organic phase containing an acidic organophosphorus extractant. Real-time pH monitoring would significantly increase confidence in the separation performance. Our research is focused on developing a general method for online determination of the pH of aqueous solutions through chemometric analysis of Raman spectra. Spectroscopic process-monitoring capabilities, incorporated in a counter-current centrifugal contactor bank, provide a pathway for online, real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for online applications, whereas classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Raman spectroscopy discriminates between the protonated and deprotonated forms of the carboxylic acid buffer, and the chemometric processing of the Raman spectral data with PLS (partial least-squares) regression provides a means to quantify their respective abundances and therefore determine the solution pH. Interpretive quantitative models have been developed and validated under a range of chemical composition and pH conditions using a lactic acid/lactate buffer system. The developed model was applied to new spectra obtained from online spectral measurements during a solvent extraction experiment using a counter-current centrifugal contactor bank. The model

  1. Development of a new surfactant liquid formulation for TBP removal in reprocessing plants for decommissioning purposes

    Energy Technology Data Exchange (ETDEWEB)

    Fournel, B.; Bisel, I.; Pochon, P.; Delagrange, J.; Fulconis, J.M. [French Atomic Energy Commission, CEA/Siege, 31-33, rue de la Federation, 75752 Paris cedex 15 (France); Causse, J. [Universite de Montpellier, Place Eugene Bataillon 34095 Montpellier Cedex II (France)

    2003-07-01

    CEA has developed in the past years surfactant liquid solutions to remove organic matter located at the surfaces of nuclear components used in reprocessing facilities. These components may be covered with Tributyl Phosphate or products resulting from TBP radiolysis like Dibutyl phosphate or Monobutyl phosphate. These molecules can be combined either with uranium, plutonium or metal ions like zirconium for example. Conventional treatment used for decontamination usually have poor degreasing effect (like sodium hydroxide) so few of these products can be removed successfully. The aim of developing these new treatments is to achieve a better degreasing effect and eliminate sodium ions from the secondary liquid wastes. In a first step, low alkaline formulations have been developed (sodium content about 0,5 M to 1 M). In a second step, it is aimed to remove sodium ions completely, together with keeping a high degreasing efficiency. Another advantage to remove sodium hydroxide from decontamination solutions is to avoid Pu precipitation during the decontamination process. This paper describes the study of a degreasing formulation based on the use of fully soluble low foaming surfactants in nitric acid medium. One presents laboratory scale experiments, experiments on active samples, liquid secondary waste processing, a scale one experiment, and associated basic studies. In conclusion, chemical properties of a surfactant solution in nitric acid medium have been detailed. Aim of the formulation was to remove TBP molecules from metallic surfaces. Efficiency of the treatment was evaluated on inactive and hot samples and compared to more conventional treatments like concentrated sodium hydroxide and pure nitric acid. A micellization of 5,3 g/L of TBP in 0,5 M nitric acid is obtained. This value is about 15 times larger than TBP solubility in acid. The efficiency was found to be higher than that of sodium hydroxide and consequently the risk of Pu and U insolubilization is

  2. Airborne waste management technology applicable for use in reprocessing plants for control of iodine and other off-gas constituents

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1988-02-01

    Extensive work in the area of iodine removal from reprocessing plant off-gas streams using various types of solid sorbent materials has been conducted worldwide over the past two decades. This work has focused on the use of carbon filters, primarily for power plant applications. More recently, the use of silver-containing sorbents has been the subject of considerable research. The most recent work in the United States has addressed the use of silver-exchanged faujasites and mordenites. The chemical reactions of iodine with silver on the sorbent are not well defined, but it is generally believed that chemisorbed iodides and iodates are formed. The process for iodine recovery generally involves passage of the iodine-laden gas stream through a packed bed of the adsorbent material preheated to a temperature of about 150/degree/C. Most iodine removal system designs utilizing silver-containing solid sorbents assume only a 30 to 50% silver utilization. Based on laboratory tests, potentially 60 to 70% of the silver contained in the sorbents can be reacted with iodine. To overcome the high cost of silver associated with these materials, various approaches have been explored. Among these are the regeneration of the silver-containing sorbent by stripping the iodine and trapping the iodine on a sorbent that has undergone only partial silver exchange and is capable of attaining a much higher silver utilization. This summary report describes the US work in regeneration of iodine-loaded solid sorbent material. In addition, the report discusses the broader subject of plant off-gas treatment including system design. The off-gas technologies to recovery No/sub x/ and to recover and dispose of Kr, /sup 14/C, and I are described as to their impacts on the design of an integrated off-gas system. The effect of ventilation philosophy for the reprocessing plant is discussed as an integral part of the overall treatment philosophy of the plant off-gas. 103 refs., 5 figs., 8 tabs.

  3. Estimation of 85Kr dispersion from the spent nuclear fuel reprocessing plant in Rokkasho, Japan, using an atmospheric dispersion model.

    Science.gov (United States)

    Abe, K; Iyogi, T; Kawabata, H; Chiang, J H; Suwa, H; Hisamatsu, S

    2015-11-01

    The spent nuclear fuel reprocessing plant of Japan Nuclear Fuel Limited (JNFL) located in Rokkasho, Japan, discharged small amounts of (85)Kr into the atmosphere during final tests of the plant with actual spent fuel from 31 March 2006 to October 2008. During this period, the gamma-ray dose rates due to discharged (85)Kr were higher than the background rates measured at the Institute for Environmental Sciences and at seven monitoring stations of the Aomori prefectural government and JNFL. The dispersion of (85)Kr was simulated by means of the fifth-generation Penn State/NCAR Mesoscale Model and the CG-MATHEW/ADPIC models (ver. 5.0) with a vertical terrain-following height coordinate. Although the simulated gamma-ray dose rates due to discharged (85)Kr agreed fairly well with measured rates, the agreement between the estimated monthly mean (85)Kr concentrations and the observed concentrations was poor. Improvement of the vertical flow of air may lead to better estimation of (85)Kr dispersion.

  4. Nuclear Fuel Reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Harold F. McFarlane; Terry Todd

    2013-11-01

    Reprocessing is essential to closing nuclear fuel cycle. Natural uranium contains only 0.7 percent 235U, the fissile (see glossary for technical terms) isotope that produces most of the fission energy in a nuclear power plant. Prior to being used in commercial nuclear fuel, uranium is typically enriched to 3–5% in 235U. If the enrichment process discards depleted uranium at 0.2 percent 235U, it takes more than seven tonnes of uranium feed to produce one tonne of 4%-enriched uranium. Nuclear fuel discharged at the end of its economic lifetime contains less one percent 235U, but still more than the natural ore. Less than one percent of the uranium that enters the fuel cycle is actually used in a single pass through the reactor. The other naturally occurring isotope, 238U, directly contributes in a minor way to power generation. However, its main role is to transmute into plutoniumby neutron capture and subsequent radioactive decay of unstable uraniumand neptuniumisotopes. 239Pu and 241Pu are fissile isotopes that produce more than 40% of the fission energy in commercially deployed reactors. It is recovery of the plutonium (and to a lesser extent the uranium) for use in recycled nuclear fuel that has been the primary focus of commercial reprocessing. Uraniumtargets irradiated in special purpose reactors are also reprocessed to obtain the fission product 99Mo, the parent isotope of technetium, which is widely used inmedical procedures. Among the fission products, recovery of such expensive metals as platinum and rhodium is technically achievable, but not economically viable in current market and regulatory conditions. During the past 60 years, many different techniques for reprocessing used nuclear fuel have been proposed and tested in the laboratory. However, commercial reprocessing has been implemented along a single line of aqueous solvent extraction technology called plutonium uranium reduction extraction process (PUREX). Similarly, hundreds of types of reactor

  5. Noble gas retention in a reprocessing plant by selective absorption at low radiokrypton inventories

    Energy Technology Data Exchange (ETDEWEB)

    Henrich, E.; Huefner, R.; Weirich, F.

    1982-01-01

    In consideration of the special requirements on safety and technique in handling radioactive materials a continuous and selective variant of the noble gas scrubbing process with the solvent CF/sub 2/Cl/sub 2/ (refrigerant 12 or briefly R12) has been worked out. Principles and process direction are described. A good off-gas decontamination and a good Xe/Kr-separation have been obtained in a small laboratory facility, on the basis of which a semi-technical plant has been designed. The essential test aims of that plant are sketched and the ability to master several problems (purification of the solvent, radiolysis, corrosion) and the technical feasibility are discussed.

  6. Acidic surfactant solutions for tributylphosphate removal in nuclear fuel reprocessing plants: A formulation study

    Energy Technology Data Exchange (ETDEWEB)

    Causse, J.; Faure, S. [CEA Marcoule, LPAD, SPDE, DEN, 30 (France)

    2009-04-15

    The removal of tributylphosphate (TBP), an organic solvent widely used as a complexing agent for uranium and plutonium in nuclear plants, was investigated to understand and adapt the mechanisms involved in TBP detachment and solubilization in acidic surfactant solutions. Two well-known degreasing mechanisms, roll-up and emulsification, should be combined for maximum effect. These mechanisms were characterized with a CCD camera to measure contact angles between a solid substrate and a liquid drop. We measured the contact angles of a TBP drop deposited on a stainless steel plate immersed in an acidic surfactant solution, and quantified the amount of TBP solubilized in the micelles by turbidity measurements. Preliminary results of micelle size characterization by dynamic light scattering are presented. We formulated new acidic surfactant solutions associating two industrial surfactants, Pluronic P123 and Rewopal X1207L, with improvement factors in various fields (total organic matter content, oil detachment and solubilization efficiency, emulsion stability, etc.). (authors)

  7. Tritium concentrations in the atmospheric environment at Rokkasho, Japan before the final testing of the spent nuclear fuel reprocessing plant.

    Science.gov (United States)

    Akata, Naofumi; Kakiuchi, Hideki; Shima, Nagayoshi; Iyogi, Takashi; Momoshima, Noriyuki; Hisamatsu, Shun'ichi

    2011-09-01

    This study aimed at obtaining background tritium concentrations in precipitation and air at Rokkasho where the first commercial spent nuclear fuel reprocessing plant in Japan has been under construction. Tritium concentration in monthly precipitation during fiscal years 2001-2005 had a seasonal variation pattern which was high in spring and low in summer. The tritium concentration was higher than that observed at Chiba City as a whole. The seasonal peak concentration at Rokkasho was generally higher than that at Chiba City, while the baseline concentrations of both were similar. The reason for the difference may be the effect of air mass from the Asian continent which is considered to have high tritium concentration. Atmospheric tritium was operationally separated into HTO, HT and hydrocarbon (CH(3)T) fractions, and the samples collected every 3 d-14 d during fiscal year 2005 were analyzed for these fractions. The HTO concentration as radioactivity in water correlated well with that in the precipitation samples. The HT concentration was the highest among the chemical forms analyzed, followed by the HTO and CH(3)T concentrations. The HT and CH(3)T concentrations did not have clear seasonal variation patterns. The HT concentration followed the decline previously reported by Mason and Östlund with an apparent half-life of 4.8 y. The apparent and environmental half-lives of CH(3)T were estimated as 9.2 y and 36.5 y, respectively, by combining the present data with literature data. The Intergovernmental Panel on Climate Change used the atmospheric lifetime of 12 y for CH(4) to estimate global warming in its 2007 report. The longer environmental half-life of CH(3)T suggested its supply from other sources than past nuclear weapon testing in the atmosphere. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Development of the CELVA-1D code to evaluate the safety of an air-ventilation system during postulated fire and explosion in the reprocessing plant. Contract research

    Energy Technology Data Exchange (ETDEWEB)

    Nishio, Gunji; Watanabe, Kouji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kouno, Kouji; Yamazaki, Noboru; Mukaide, Shigeo; Yoshioka, Itsuo

    1998-03-01

    The CELVA-1D computer code was developed to evaluate the confinement of radioactive materials during postulated fire and explosion in a cell of nuclear fuel reprocessing plants. The CELVA-1D code calculates a response of temperature, pressure, flow velocity of fluid in an air-ventilation system of the plants by one-dimensional thermofluid analysis and calculates an ability to confine radioactive aerosol particles by transport, deposition, and HEPA filtration. The mathematical models in CELVA-1D were verified by comparison of the calculation with the result of JAERI`s demonstration tests simulating hypothetical fire and explosion accidents in the cell. (author)

  9. Estimation of tritium dispersion from the spent nuclear fuel reprocessing plant in Rokkasho using an atmospheric dispersion model

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Koichi; Kakiuchi, Hideki; Iyogi, Takashi; Hisamatsu, Shun' ichi [Institute for Environmental Sciences, Rokkasho, Aomori 039-3212 (Japan); Akata, Naofumi [Institute for Environmental Sciences, Rokkasho, Aomori 039-3212 (Japan); National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Chiang, Jing-Hsien; Suwa, Hiroji [Japan NUS Co., Ltd., Tokyo 160-0023 (Japan)

    2014-07-01

    Japan's first large-scale commercial plant for reprocessing spent nuclear fuel was constructed in Rokkasho, Japan, by Japan Nuclear Fuel Limited (JNFL). Final tests of plant operation carried out with spent fuels since 31 March 2006 have indicated that small amounts of radionuclides (mainly {sup 3}H, {sup 14}C, {sup 85}Kr, and {sup 129}I) are discharged into the atmosphere from the main stack of the plant. To estimate the atmospheric dispersion of {sup 3}H discharged from the plant, we used a combination of the Fifth-Generation Penn State/NCAR Mesoscale Model (MM5) and the CG-MATHEW/ADPIC models, Version 5.0 (ARAC-2). Simulation results were validated with atmospheric {sup 3}H concentrations and wet deposition rates measured at the Institute for Environmental Sciences (IES), located 2.6 km east from the stack. Biweekly atmospheric HTO, HT, and CH3T samples and monthly precipitation samples were collected at IES from April 2006 to February 2009 (the test period). Concentrations of {sup 3}H in the samples were measured with a low-background liquid scintillation counter (LSC-LB5, Hitachi Aloka Medical, Ltd., Tokyo, Japan). To simulate the dispersion of {sup 3}H from the stack, a meteorological field was calculated by MM5 and used as input to ARAC-2, which consists of a mass-consistent wind model and a particle-tracing-type dispersion model. The simulation areas were 315 km x 315 km for MM5 and 50 km x 50 km for ARAC-2. The following meteorological data were input to MM5: grid point data derived from the Mesoscale Model of the Japan Meteorological Agency (JMA), data from JMA's Automated Meteorological Data Acquisition System (AMeDAS), and wind speed and direction at IES and JNFL measured every 10 min. The weekly discharge rates of {sup 3}H disclosed by JNFL were used as the source term for ARAC-2. The concentrations of {sup 3}H in atmospheric moisture and precipitation samples increased from their background values during the test period. As an index of

  10. Standard model for the safety analysis report of nuclear fuel reprocessing plants; Modelo padrao para relatorio de analise de seguranca de usinas de reprocessamento de combustiveis nucleares

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-02-15

    This norm establishes the Standard Model for the Safety Analysis Report of Nuclear Fuel Reprocessing Plants, comprehending the presentation format, the detailing level of the minimum information required by the CNEN for evaluation the requests of Construction License or Operation Authorization, in accordance with the legislation in force. This regulation applies to the following basic reports: Preliminary Safety Analysis Report - PSAR, integrating part of the requirement of Construction License; and Final Safety Analysis Report (FSAR) which is the integrating part of the requirement for Operation Authorization.

  11. Classic Nuclear Fuel Reprocessing Flowsheet

    Energy Technology Data Exchange (ETDEWEB)

    Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-13

    This is a flowsheet as well as a series of subsheets to be used for discussion on the standard design of a reprocessing plant. This flowsheet consists of four main sections: offgas handling, separations, solvent wash, and acid recycle. As well as having the main flowsheet, subsections have been broken off into their own sheets to provide for larger font and ease of printing.

  12. Application of curium measurements for safeguarding at reprocessing plants. Study 1: High-level liquid waste and Study 2: Spent fuel assemblies and leached hulls

    Energy Technology Data Exchange (ETDEWEB)

    Rinard, P.M.; Menlove, H.O.

    1996-03-01

    In large-scale reprocessing plants for spent fuel assemblies, the quantity of plutonium in the waste streams each year is large enough to be important for nuclear safeguards. The wastes are drums of leached hulls and cylinders of vitrified high-level liquid waste. The plutonium amounts in these wastes cannot be measured directly by a nondestructive assay (NDA) technique because the gamma rays emitted by plutonium are obscured by gamma rays from fission products, and the neutrons from spontaneous fissions are obscured by those from curium. The most practical NDA signal from the waste is the neutron emission from curium. A diversion of waste for its plutonium would also take a detectable amount of curium, so if the amount of curium in a waste stream is reduced, it can be inferred that there is also a reduced amount of plutonium. This report studies the feasibility of tracking the curium through a reprocessing plant with neutron measurements at key locations: spent fuel assemblies prior to shearing, the accountability tank after dissolution, drums of leached hulls after dissolution, and canisters of vitrified high-level waste after separation. Existing pertinent measurement techniques are reviewed, improvements are suggested, and new measurements are proposed. The authors integrate these curium measurements into a safeguards system.

  13. Report of reprocessing of reflection seismic profile X-5 Waste Isolation Pilot Plant site, Eddy County, New Mexico

    Science.gov (United States)

    Miller, John J.

    1983-01-01

    Seismic reflection profile X-5 exhibits a 7,700 ft long anomalous zone of poor quality to nonexistent reflections between shotpoints 100 and 170, compared to the high-quality, flat-lying, coherent reflections on either side. Results from drill holes in the area suggest 'layer cake' geology with no detectable abnormalities such as faults present. In an attempt to determine whether the anomalous zone of the seismic profile is an artifact or actually indicates a geologic condition, the data were extensively reprocessed using state-of-the-art processing techniques and the following conclusions were made: 1. The field-recorded data in the anomalous zone are of poor quality due to surface conditions and recording parameters used. 2. Reprocessing shows reflectors throughout the anomalous zone at all levels. However, it cannot prove that the reflectors are continuous throughout the anomalous zone. 3. Significant improvement in data quality may be achieved if the line is reshot using carefully determined recording parameters.

  14. Development of On-Line Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes

    Energy Technology Data Exchange (ETDEWEB)

    Casella, Amanda J.; Hylden, Laura R.; Campbell, Emily L.; Levitskaia, Tatiana G.; Peterson, James M.; Smith, Frances N.; Bryan, Samuel A.

    2015-05-19

    Knowledge of real-time solution properties and composition is a necessity for any spent nuclear fuel reprocessing method. Metal-ligand speciation in aqueous solutions derived from the dissolved commercial spent fuel is highly dependent upon the acid concentration/pH, which influences extraction efficiency and the resulting speciation in the organic phase. Spectroscopic process monitoring capabilities, incorporated in a counter current centrifugal contactor bank, provide a pathway for on-line real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for on-line applications, while classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Our research is focused on developing a general method for on-line determination of pH of aqueous solutions through chemometric analysis of Raman spectra. Interpretive quantitative models have been developed and validated under the range of chemical composition and pH using a lactic acid/lactate buffer system. The developed model was applied to spectra obtained on-line during solvent extractions performed in a centrifugal contactor bank. The model predicted the pH within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH on-line in applications such as nuclear fuel reprocessing.

  15. Improvement in soil-plant-atmosphere modelling of {sup 14}C dynamics and the application of two models to data from a nuclear fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    Limer, Laura M.C. [Quintessa Limited, 633/635 Birchwood Boulevard, WA3 7QU, Warrington (United Kingdom); Le Dizes-Maurel, Severine; Maro, Denis [Institut de Radioprotection et de Surete Nucleaire (IRSN), PRP-ENV, SERIS, LM2E, Cadarache, Saint-Paul Lez Durance (France); Klos, Ryk [Aleksandria Sciences Limited, S7 2DD, Sheffield (United Kingdom); Norden, Maria [Swedish Radiation Safety Authority, SE-171 16, Stockholm (Sweden)

    2014-07-01

    The need to address radiological impacts from {sup 14}C released to the biosphere has been recognised for some time. However, because of its role in biological processes and its ecological cycling, the standard methods employed to model long-term radionuclide transport and accumulation in the biosphere cannot be used satisfactorily for {sup 14}C. The degree of complexity in any {sup 14}C model used must be balanced against the availability of supporting data and the assessment context. In 2011, the model SSPAM14C was developed on behalf of the Swedish Radiation Safety Authority (SSM), with the intention to usage in both long-term and short-term release assessments (Limer et al., 2013). As part of the model testing it was applied to data collected during laboratory experiments performed by Imperial College London in the 1990's (Tucker and Shaw, 1997). Independently, IRSN has also been developing its own {sup 14}C model, TOCATTA (Le Dizes et al., 2012), and has previously tested it against field data collected by IRSN, between 2006 and 2008, in the vicinity of the La Hague nuclear fuel reprocessing plant in France (Aulagnier et al., 2012). The main conclusion drawn from these comparisons highlighted the need to develop an hourly time step model of {sup 14}C transfer based more thoroughly on knowledge arising from plant physiology, soil science and meteorology (Farquhar and von Caemmerer, 1982). These models have undergone further development, and have been applied here to the La Hague field data as it represents a medium term data set with both short term variation and a sizeable time series of measurements against which to compare the models. By increasing the temporal resolution of the IRSN model, a new version called TOCATTA-ccan simulate the impact of intermittent {sup 14}C releases occurring either the day or night (Aulagnier et al., 2013). Simplification of the soil sub-model in SSPAM14C is also shown to be justified for application to operational release

  16. Improving ATLAS reprocessing software

    CERN Document Server

    Novak, Tadej

    2014-01-01

    For my CERN Summer Student programme I have been working with ATLAS reprocessing group. Data taken at ATLAS experiment is not only processed after being taken, but is also reprocessed multiple times afterwards. This allows applying new alignments, calibration of detector and using improved or faster algorithms. Reprocessing is usually done in campaigns for different periods of data or for different interest groups. The idea of my project was to simplify the definition of tasks and monitoring of their progress. I created a LIST configuration files generator script in Python and a monitoring webpage for tracking current reprocessing tasks.

  17. Specialist MTR reprocessing at Dounreay

    Energy Technology Data Exchange (ETDEWEB)

    Macdonald, A. J.; Skea, D. C. J. (UKAEA, Dounreay (United Kingdom))

    1999-12-15

    A summary is provided of the facilities at Dounreay and goes on to describe the plans to adapt an existing facility to reprocess irradiated TRIGA fuel. These facilities will provide a treatment for the fuel, thus enabling reactor operators to pursue their programme of decommissioning. The main features of the processing route are receipt, storage, dismantling and chemical treatment by solvent extraction. Solvent extraction will be on a small scale using improved plant containment and replaceable modular equipment. An outline process flowsheet is described. Wastes produced by the process will pass through established routes, with medium active liquor being stored in the short term and ultimately cemented. The modifications to the facilities will allow the reprocessing of other 'exotic' fuel types to produce waste forms suitable for disposal. (orig.)

  18. Transformative monitoring approaches for reprocessing.

    Energy Technology Data Exchange (ETDEWEB)

    Cipiti, Benjamin B.

    2011-09-01

    The future of reprocessing in the United States is strongly driven by plant economics. With increasing safeguards, security, and safety requirements, future plant monitoring systems must be able to demonstrate more efficient operations while improving the current state of the art. The goal of this work was to design and examine the incorporation of advanced plant monitoring technologies into safeguards systems with attention to the burden on the operator. The technologies examined include micro-fluidic sampling for more rapid analytical measurements and spectroscopy-based techniques for on-line process monitoring. The Separations and Safeguards Performance Model was used to design the layout and test the effect of adding these technologies to reprocessing. The results here show that both technologies fill key gaps in existing materials accountability that provide detection of diversion events that may not be detected in a timely manner in existing plants. The plant architecture and results under diversion scenarios are described. As a tangent to this work, both the AMUSE and SEPHIS solvent extraction codes were examined for integration in the model to improve the reality of diversion scenarios. The AMUSE integration was found to be the most successful and provided useful results. The SEPHIS integration is still a work in progress and may provide an alternative option.

  19. Nuclear Fuel Reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Michael F. Simpson; Jack D. Law

    2010-02-01

    This is an a submission for the Encyclopedia of Sustainable Technology on the subject of Reprocessing Spent Nuclear Fuel. No formal abstract was required for the article. The full article will be attached.

  20. Control systems of fission reactors and of reprocessing plants: general architecture; Controle-commande des reacteurs et des usines: architecture generale

    Energy Technology Data Exchange (ETDEWEB)

    Appel, B.; Guesnier, G. [Electricite de France, 75 - Paris (France). Service Etudes et Projets Thermiques et Nucleaires; Chabert, J. [Cogema, 78 - Velizy-Villacoublay (France)

    1998-10-01

    As any industrial facility, nuclear power plants and fuel reprocessing centers need means to monitor and manage the physical processes that are involved in their activities. All these means form the control system. Control systems are made up of sensors, able to turn physical data into electric signals, of automatic control circuits dedicated to process these electric signals, of supervisor systems to give to the staff the possibility to intervene, and of actuators designed to transform electric signals into actions on the physical process. The general design of control systems has to conform to the requirements imposed by the physical process itself, by nuclear safety and by operating conditions. As for the physical process, requirements can be diverse according to the purpose of the nuclear facility but the continuity must be assured because of the permanent release of energy from irradiated materials. As for safety, we have to notice the stiff requirements for all the equipment that is concerned by the confinement of radioactivity. The general architecture of control systems is made up of 3 levels; i) level 0: sensors and actuators, ii) level 1: automatic control circuits and iii) level 2: the control room. The second and third levels are mainly based on computer and data processing systems. All the equipment is classified into 3 levels of demands. The first level is the stiffest which generally implies that devices are specially designed so that they satisfy all the requirements. (A.C.)

  1. Transfer of conservative and non-conservative radionuclides from the Sellafield nuclear fuel reprocessing plant to the coastal waters of Ireland

    Energy Technology Data Exchange (ETDEWEB)

    Mcmahon, C.A.; Fegan, M.; Wong, J.; Long, S.C.; Mckittrick, L.; Thomas, K.; Rafferty, B. [Radiological Protection Institute of Ireland, Dublin (Ireland)

    2004-07-01

    The Radiological Protection Institute of Ireland has monitored levels of anthropogenic radionuclides in the Irish marine environment for over 20 years. While the primary objective of the monitoring programme is to assess the exposure of the Irish population resulting from the presence of these radionuclides in the marine environment, the programme also aims to assess the geographical distribution and temporal variations of the radionuclides. The programme involves the routine sampling of and testing for radioactivity in fish, shellfish, seaweed, sediments and seawater. The data generated in the course of this programme, as well as in a separate study of changing plutonium isotopic ratios in Fucus vesiculosus from the west coast of Ireland, are used in this paper to estimate transport times from the Sellafield nuclear fuel reprocessing plant to the western Irish Sea and from the Irish Sea to the west coast of Ireland. The results obtained are discussed in the paper and the transfer times estimated for particle-reactive radionuclides (plutonium isotopes) compared with those obtained for more conservative radionuclides ({sup 137}Cs and {sup 99}Tc). Transfer factors (calculated as the ratio between observed concentrations in the environment and an average discharge rate {tau} years earlier, where {tau} is the transport time) are also presented. (author)

  2. Comparison of RIMPUFF, HYSPLIT, ADMS atmospheric dispersion model outputs, using emergency response procedures, with (85)Kr measurements made in the vicinity of nuclear reprocessing plant.

    Science.gov (United States)

    Connan, Olivier; Smith, Kilian; Organo, Catherine; Solier, Luc; Maro, Denis; Hébert, Didier

    2013-10-01

    The Institut de Radioprotection et de Sureté Nucléaire (IRSN) performed a series of (85)Kr air sampling campaigns at mesoscale distances (18-50 km) from the AREVA NC La Hague nuclear reprocessing plant (North West France) between 2007 and 2009. The samples were collected in order to test and optimise a technique to measure low krypton-85 ((85)Kr) air concentrations and to investigate the performance of three atmospheric dispersion models (RIMPUFF, HYSPLIT, and ADMS), This paper presents the (85)Kr air concentrations measured at three sampling locations which varied from 2 to 8000 Bq m(-3), along with the (85)Kr air concentrations output by the dispersion models. The dispersion models made reasonable estimates of the mean concentrations of (85)Kr field measurements during steady wind conditions. In contrast, the models failed to accurately predict peaks in (85)Kr air concentration during periods of rapid and large changes in wind speed and/or wind direction. At distances where we made the comparisons (18-50 km), in all cases, the models underestimated the air concentration activities.

  3. 9 CFR 114.18 - Reprocessing of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Reprocessing of biological products. 114.18 Section 114.18 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.18 Reprocessing of biological products. The Administrator...

  4. Accident Safety Analysis Method Study for Spent Fuel Reprocessing Plant%乏燃料后处理厂事故安全分析方法的探讨

    Institute of Scientific and Technical Information of China (English)

    李锐柔; 徐云起

    2012-01-01

    According to some relative documents (like NRC, DOE and IAEA documents et al. ), and considering the experience and practical technology level of the safety analysis of spent fuel reprocess-ing plant in China, this article suggested that the risk assessment, which combining both deterministic ap-proach and probabilistic safety analysis, could be applied to the accident safety analysis of spent fuel repro-cessing plant in China. Meanwhile, the coordinated working procedure was also proposed.%参考了NRC、DOE、IAEA等相关文件,结合我国乏燃料后处理厂安全分析的经验和实际技术水平,建议我国乏燃料后处理厂在事故安全分析中可采用确定论和概率安全分析相结合的风险评价方法,并提出了相应的工作流程。

  5. Final report, Task 3: possible uses of the Nuclear Fuel Services, Inc. reprocessing plant at West Valley, New York. [For research on alternative fuel cycles, spiking, coprocessing, waste solidification, and recovery of radioactive gases

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-14

    The West Valley Plant could readily be used for work on reprocessing of alternative fuels, spiking, coprocessing (including CIVEX), waste solidification, and the recovery of radioactive gases. The plant could be easily modified for any scale between small-scale experimental work to production-scale demonstration, involving virtually any combination of fissile/fertile fuel materials that might be used in the future. The use of this plant for the contemplated experimental work would involve lower capital costs than the use of other facilities at DOE sites, except possibly for spiking of recovered products; the operating costs would be no greater than at other sites. The work on reprocessing of alternative fuels and coprocessing could commence within about one year; on recovery of radioactive gases, in 3 to 5 years; on spiking, in 4 years; and on waste solidification demonstration, in about 5 years. The contemplated work could be begun at this plant at least as early as at Barnwell, although work on spiking of recovered products could probably be started in existing hot cells earlier than at West Valley. (DLC)

  6. Integrated international safeguards concepts for fuel reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A.; Gutmacher, R.G.; Markin, J.T.; Shipley, J.P.; Whitty, W.J.; Camp, A.L.; Cameron, C.P.; Bleck, M.E.; Ellwein, L.B.

    1981-12-01

    This report is the fourth in a series of efforts by the Los Alamos National Laboratory and Sandia National Laboratories, Albuquerque, to identify problems and propose solutions for international safeguarding of light-water reactor spent-fuel reprocessing plants. Problem areas for international safeguards were identified in a previous Problem Statement (LA-7551-MS/SAND79-0108). Accounting concepts that could be verified internationally were presented in a subsequent study (LA-8042). Concepts for containment/surveillance were presented, conceptual designs were developed, and the effectiveness of these designs was evaluated in a companion study (SAND80-0160). The report discusses the coordination of nuclear materials accounting and containment/surveillance concepts in an effort to define an effective integrated safeguards system. The Allied-General Nuclear Services fuels reprocessing plant at Barnwell, South Carolina, was used as the reference facility.

  7. 后处理厂溶剂再生系统始发事件的FMEA评价%Initial Event Evaluation of Solvent Regeneration System in Reprocessing Plant by FMEA

    Institute of Scientific and Technical Information of China (English)

    吕丹; 李锐柔; 张春龙; 刘运陶; 张敏; 童节娟; 赵军

    2015-01-01

    The identification of initial events is the basis of accident analysis.Currently, in the accident analysis of nuclear fuel reprocessing plants,the general method for initial event identification still has not been established.Taking solvent regeneration system of decontamination cycle in the reprocessing plant as the research example,the engineering reliability evaluation method of the failure modes and effects analysis (FMEA)was applied to the identification and screening of initial events.The analysis results show that the types of initial events mainly consist of the leakage from the breakage of the boundary of radioactive material confinements (including equipment,pipes and valves), the failure of interface measuring instruments of acid or alkaline washing mixed-settler, the failure of liquid level measuring instruments of each storage tank or washing mixed-settler,as well as the shaft sealing leakage of the organic phase export metering pump for contaminated solvent reception tank.With the comparison of the reprocessing plant safety analysis reports of the United States and the actual accident examples of foreign reprocessing plants,the analysis results of FMEA method show good coverage and prac-ticability to the accidents caused by equipment failure.Therefore,the FMEA method can be used as a reference method for initial events selection,and can be popularized to other process systems of reprocessing plants.%识别始发事件是事故分析的基础。目前后处理厂对始发事件的识别尚未形成通用方法。本文以后处理厂共去污分离循环的溶剂再生系统为研究示范对象,采用失效模式和影响分析(FMEA)的工程评价方法识别和筛选始发事件。分析结果表明,该系统始发事件的类型主要包括:包容放射性物料的边界(设备、管道、阀门)破损泄漏;酸、碱洗槽界面测量仪表失效;各贮槽和洗涤槽液位测量仪表失效;污溶剂接受槽有机相出口计量泵

  8. Radioactive Semivolatiles in Nuclear Fuel Reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R. T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Strachan, D. M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ilas, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Spencer, B. B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Soelberg, N. R. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    In nuclear fuel reprocessing, various radioactive elements enter the gas phase from the unit operations found in the reprocessing facility. In previous reports, the pathways and required removal were discussed for four radionuclides known to be volatile, 14C, 3H, 129I, and 85Kr. Other, less volatile isotopes can also report to the off-gas streams in a reprocessing facility. These were reported to be isotopes of Cs, Cd, Ru, Sb, Tc, and Te. In this report, an effort is made to determine which, if any, of 24 semivolatile radionuclides could be released from a reprocessing plant and, if so, what would be the likely quantities released. As part of this study of semivolatile elements, the amount of each generated during fission is included as part of the assessment for the need to control their emission. Also included in this study is the assessment of the cooling time (time out of reactor) before the fuel is processed. This aspect is important for the short-lived isotopes shown in the list, especially for cooling times approaching 10 y. The approach taken in this study was to determine if semivolatile radionuclides need to be included in a list of gas-phase radionuclides that might need to be removed to meet Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. A list of possible elements was developed through a literature search and through knowledge and literature on the chemical processes in typical aqueous processing of nuclear fuels. A long list of possible radionuclides present in irradiated fuel was generated and then trimmed by considering isotope half-life and calculating the dose from each to a maximum exposed individual with the US EPA airborne radiological dispersion and risk assessment code CAP88 (Rosnick 1992) to yield a short list of elements that actually need to be considered for control because they require high decontamination factors to meet a reasonable fraction of the regulated release. Each of these elements is

  9. Noble gas atmospheric monitoring at reprocessing facilities

    Energy Technology Data Exchange (ETDEWEB)

    Nakhleh, C.W.; Perry, R.T. Jr.; Poths, J.; Stanbro, W.D.; Wilson, W.B.; Fearey, B.L.

    1997-05-01

    The discovery in Iraq after the Gulf War of the existence of a large clandestine nuclear-weapon program has led to an across-the-board international effort, dubbed Programme 93+2, to improve the effectiveness and efficiency of International Atomic Energy Agency (IAEA) safeguards. One particularly significant potential change is the introduction of environmental monitoring (EM) techniques as an adjunct to traditional safeguards methods. Monitoring of stable noble gas (Kr, Xe) isotopic abundances at reprocessing plant stacks appears to be able to yield information on the burnup and type of the fuel being processed. To estimate the size of these signals, model calculations of the production of stable Kr, Xe nuclides in reactor fuel and the subsequent dilution of these nuclides in the plant stack are carried out for two case studies: reprocessing of PWR fuel with a burnup of 35 GWd/tU, and reprocessing of CAND fuel with a burnup of 1 GWd/tU. For each case, a maximum-likelihood analysis is used to determine the fuel burnup and type from the isotopic data.

  10. Data validation and security for reprocessing.

    Energy Technology Data Exchange (ETDEWEB)

    Tolk, Keith Michael; Merkle, Peter Benedict; DurÔan, Felicia Angelica; Cipiti, Benjamin B.

    2008-10-01

    Next generation nuclear fuel cycle facilities will face strict requirements on security and safeguards of nuclear material. These requirements can result in expensive facilities. The purpose of this project was to investigate how to incorporate safeguards and security into one plant monitoring system early in the design process to take better advantage of all plant process data, to improve confidence in the operation of the plant, and to optimize costs. An existing reprocessing plant materials accountancy model was examined for use in evaluating integration of safeguards (both domestic and international) and security. International safeguards require independent, secure, and authenticated measurements for materials accountability--it may be best to design stand-alone systems in addition to domestic safeguards instrumentation to minimize impact on operations. In some cases, joint-use equipment may be appropriate. Existing domestic materials accountancy instrumentation can be used in conjunction with other monitoring equipment for plant security as well as through the use of material assurance indicators, a new metric for material control that is under development. Future efforts will take the results of this work to demonstrate integration on the reprocessing plant model.

  11. Plasma coal reprocessing

    Science.gov (United States)

    Messerle, V. E.; Ustimenko, A. B.

    2013-12-01

    Results of many years of investigations of plasma-chemical technologies for pyrolysis, hydrogenation, thermochemical preparation for combustion, gasification, and complex reprocessing of solid fuels and hydrocarbon gas cracking are represented. Application of these technologies for obtaining the desired products (hydrogen, industrial carbon, synthesis gas, valuable components of the mineral mass of coal) corresponds to modern ecological and economical requirements to the power engineering, metallurgy, and chemical industry. Plasma fuel utilization technologies are characterized by the short-term residence of reagents within a reactor and the high degree of the conversion of source substances into the desired products without catalyst application. The thermochemical preparation of the fuel to combustion is realized in a plasma-fuel system presenting a reaction chamber with a plasmatron; and the remaining plasma fuel utilization technologies, in a combined plasma-chemical reactor with a nominal power of 100 kW, whose zone of the heat release from an electric arc is joined with the chemical reaction zone.

  12. Thorium utilization program progress report for January 1, 1974--June 30, 1975. [Reprocessing; refabrication; recycle fuel irradiations

    Energy Technology Data Exchange (ETDEWEB)

    Lotts, A.L.; Kasten, P.R.

    1976-05-01

    Work was carried out on the following: HTGR reprocessing development and pilot plant, refabrication development and pilot plant, recycle fuel irradiations, engineering and economic studies, and conceptual design of a commercial recycle plant. (DLC)

  13. Monitoring 85Kr at China Reprocessing and Radiochemistry Laboratory

    Institute of Scientific and Technical Information of China (English)

    LV; Xue-sheng; LIU; Guo-rong; WANG; Chen; XU; Chang-kun; ZHOU; Hao

    2015-01-01

    85Kr is a long life fission product and a noble gas and one of the main target radionuclides in monitoring environment for the reprocessing plant.During the course of the spent fuel elements are dissolved,85Kr is released and part of these 85Kr will be let out through the stack after

  14. Capital and operating costs of irradiated natural uranium reprocessing plants; Couts d'investissement et d'exploitation des usines de retraitement de l'uranium naturel irradie

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L.; Jouannaud, C.; Couture, J.; Duboz, J. [Commissariat a l' Energie Atomique (France). Centre d' Etudes Nucleaires; Oger, C. [Saint Gobain Nucleaire (France)

    1966-07-01

    This paper presents first a method of analysing natural uranium reprocessing plants investment costs (method similar to LANG and BACH well known in the fuel oil industry) and their operating costs (analysed according to their economic type). This method helps establishing standard cost structures for these plants, allowing thus comparisons between existing or planned industrial facilities. It also helps evaluating the foreseeable consequences of technical progress. Some results obtained are given, concerning: the investment costs sensitivity to the various technical parameters defining the fuel and their comparison according to the country or the economic area taken into account. Finally, the influence of the plants size on their investment costs is shown. (author) [French] La communication expose d'abord une methode d'analyse des couts d'investissement des usines de retraitement de l'uranium naturel irradie (inspiree de celles de LANG et de BACH, bien connues dans l'industrie petroliere) et de leurs couts d'exploitation (selon leur nature economique). Cette methode permet d'etablir des structures types de couts de ces usines et de comparer les realisations industrielles et les projets. Elle facilite l'exploration des consequences previsibles du progres technique. On indique un certain nombre de resultats obtenus, concernant la sensibilite des couts d'investissement de ces usines aux differents parametres techniques definissant le combustible et leur confrontation selon les pays ou aires economiques envisages. On montre enfin comment doit pouvoir s'exprimer l'influence de la taille des usines sur leur cout d'investissement. (auteur)

  15. Commercial Nuclear Reprocessing in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sherrill, Charles Leland [Brigham Young Univ., Provo, UT (United States); Balatsky, Galya Ivanovna [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-09-09

    The short presentation outline: Reprocessing Overview; Events leading up to Carter’s Policy; Results of the decision; Policy since Nuclear Nonproliferation Act. Conclusions reached: Reprocessing ban has become an easy and visible fix to the public concern about proliferation, but has not completely stopped proliferation; and, Reprocessing needs to become detached from political considerations, so technical research can continue, regardless of the policy decisions we decide to take.

  16. X-ray reprocessing in binaries

    Science.gov (United States)

    Paul, Biswajit

    2016-07-01

    We will discuss several aspects of X-ray reprocessing into X-rays or longer wavelength radiation in different kinds of binary systems. In high mass X-ray binaries, reprocessing of hard X-rays into emission lines or lower temperature black body emission is a useful tool to investigate the reprocessing media like the stellar wind, clumpy structures in the wind, accretion disk or accretion stream. In low mass X-ray binaries, reprocessing from the surface of the companion star, the accretion disk, warps and other structures in the accretion disk produce signatures in longer wavelength radiation. X-ray sources with temporal structures like the X-ray pulsars and thermonuclear burst sources are key in such studies. We will discuss results from several new investigations of X-ray reprocessing phenomena in X-ray binaries.

  17. Reprocessing method for spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Hoshikawa, Tadahiro; Sawa, Toshio; Suzuoki, Akira [Hitachi Ltd., Tokyo (Japan); Takashima, Yoichi; Kumagai, Mikiro

    1998-09-29

    The present invention provides a method of reprocessing spent fuels to form MOX having a Pu/U ratio suitable to fuels of LWR or fast reactors and uranium oxides of fuels of an LWR reactor. In a brief separation step for uranium, carbonate is added to a nitric acid solution in which spent fuels are dissolved, to dissolve a portion of uranium in the nitric acid solution. The residual uranium, plutonium and fission products are made into complexes of carboxylic acid ions and precipitated. The precipitated complexes of carboxylic acid ions are brought into contact with a different nitric acid solution to recover the uranium, plutonium and fission products. The concentration of the carbonate in the nitric acid solution in which uranium is partially dissolved is determined in accordance with the plutonium/uranium ratio based on the relation between the saturation concentration of uranium to the concentration of carbonate in the nitric acid solution. (T.M.)

  18. Radioactive Iodine and Krypton Control for Nuclear Fuel Reprocessing Facilities

    Directory of Open Access Journals (Sweden)

    Nick R. Soelberg

    2013-01-01

    Full Text Available The removal of volatile radionuclides generated during used nuclear fuel reprocessing in the US is almost certain to be necessary for the licensing of a reprocessing facility in the US. Various control technologies have been developed, tested, or used over the past 50 years for control of volatile radionuclide emissions from used fuel reprocessing plants. The US DOE has sponsored, since 2009, an Off-gas Sigma Team to perform research and development focused on the most pressing volatile radionuclide control and immobilization problems. In this paper, we focus on the control requirements and methodologies for 85Kr and 129I. Numerous candidate technologies have been studied and developed at laboratory and pilot-plant scales in an effort to meet the need for high iodine control efficiency and to advance alternatives to cryogenic separations for krypton control. Several of these show promising results. Iodine decontamination factors as high as 105, iodine loading capacities, and other adsorption parameters including adsorption rates have been demonstrated under some conditions for both silver zeolite (AgZ and Ag-functionalized aerogel. Sorbents, including an engineered form of AgZ and selected metal organic framework materials (MOFs, have been successfully demonstrated to capture Kr and Xe without the need for separations at cryogenic temperatures.

  19. Characteristics and behavior of emulsion at nuclear fuel reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Gonda, K.; Nemoto, T.; Oka, K.

    1982-05-01

    The characteristics and behavior of the emulsion formed in mixer-settlers during nuclear fuel reprocessing were studied with the dissolver solution of spent fuel burned up to 28,000 MWd/MTU and a palladium colloidal solution, respectively. The emulsion was observed to be oil in water where nonsoluble residues of spent fuel were condensed as emulsifiers. Emulsion formed at interfaces in the settler showed electric conductivity due to continuity of the aqueous phase of the emulsion and viscosity due to the creamy state of the emulsion. The higher the palladium particle concentration was, the larger the amount of emulsion formed. This result agreed well with experience obtained in the Tokai Reprocessing Plant operation that both nonsoluble residues and emulsion formation increased remarkably on fuels in which burnup exceeded 20 000 MWd/MTU.

  20. Gloves Reprocessing: Does It Really Save Money?

    Science.gov (United States)

    Arora, Pankaj; Kumari, Santosh; Sodhi, Jitender; Talati, Shweta; Gupta, Anil Kumar

    2015-12-01

    Gloves are reprocessed and reused in health-care facilities in resource-limited settings to reduce the cost of availability of gloves. The study was done with the aim to compute the cost of reprocessing of gloves so that an economically rationale decision can be taken. A retrospective record-based cross-sectional study was undertaken in a central sterile supply department where different steps during reprocessing of gloves were identified and the cost involved in reprocessing per pair of gloves was calculated. The cost of material and manpower was calculated to arrive at the cost of reprocessing per pair of gloves. The cost of a reprocessed pair of surgical gloves was calculated to be Indian Rupee (INR) 14.33 which was greater than the cost of a new pair of disposable surgical gloves (INR 9.90) as the cost of sterilization of one pair of gloves itself came out to  be INR 10.97. The current study showed that the purchase of sterile disposable single-use gloves is cheaper than the process of recycling. Reprocessing of gloves is not economical on tangible terms even in resource-limited settings, and from the perspective of better infection control as well as health-care worker safety, it further justifies the use of disposable gloves.

  1. The Fourth (A)ATSR Data Reprocessing

    Science.gov (United States)

    Goryl, Philippe; Cocevar, Pauline; Done, Fay; Aatsr Quality Working Group

    2016-08-01

    This paper aims to inform users of the upcoming Fourth Reprocessing of ATSR-1, ATSR-2 and AATSR data. The main objective of the Fourth Reprocessing is to generate (A)ATSR Level 1B data products in a similar format to SLSTR products from Sentinel-3. In this way, users can easily access the 20-year dataset from the ERS and ENVISAT (A)ATSR missions and carry the analysis forward into the Sentinel era. In addition to the product format change, the dataset will build on the improvements implemented in the Third Reprocessing, and will contain further improvements and enhancements, as described below.

  2. Evaluation technology for burnup and generated amount of plutonium by measurement of xenon isotopic ratio in dissolver off-gas at reprocessing facility (Joint research)

    OpenAIRE

    岡野 正紀; 久野 剛彦; 高橋 一朗; 白水 秀知; Charlton, W. S.; Wells, C. A.; Hemberger, P. H.; 山田 敬二; 酒井 敏雄

    2006-01-01

    The amount of Pu in the spent fuel was evaluated from Xe isotopic ratio in off-gas in reprocessing facility, is related to burnup. Six batches of dissolver off-gas at spent fuel dissolution process were sampled from the main stack in Tokai Reprocessing Plant during BWR fuel reprocessing campaign. Xenon isotopic ratio was determined with GC/MS. Burnup and generated amount of Pu were evaluated with Noble Gas Environmental Monitoring Application code (NOVA), developed by Los Alamos National Labo...

  3. Storage and Reprocessing of Spent Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Karpius, Peter Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-02

    Addressing the problem of waste, especially high-level waste (HLW), is a requirement of the nuclear fuel cycle that cannot be ignored. We explore the two options employed currently, long-term storage and reprocessing.

  4. Nuclear fuel reprocessing and high level waste disposal: informational hearings. Volume V. Reprocessing. Part 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-03-08

    Testimony was presented by a four member panel on the commercial future of reprocessing. Testimony was given on the status of nuclear fuel reprocessing in the United States. The supplemental testimony and materials submitted for the record are included in this report. (LK)

  5. Corrosion studies in fuel element reprocessing environments containing nitric acid

    Energy Technology Data Exchange (ETDEWEB)

    Beavers, J A; White, R R; Berry, W E; Griess, J C

    1982-04-01

    Nitric acid is universally used in aqueous fuel element reprocessing plants; however, in the processing scheme being developed by the Consolidated Fuel Reprocessing Program, some of the equipment will be exposed to nitric acid under conditions not previously encountered in fuel element reprocessing plants. A previous report presented corrosion data obtained in hyperazeotropic nitric acid and in concentrated magnesium nitrate solutions used in its preparation. The results presented in this report are concerned with the following: (1) corrosion of titanium in nitric acid; (2) corrosion of nickel-base alloys in a nitric acid-hydrofluoric acid solution; (3) the formation of Cr(VI), which enhances corrosion, in nitric acid solutions; and (4) corrosion of mechanical pipe connectors in nitric acid. The results show that the corrosion rate of titanium increased with the refreshment rate of boiling nitric acid, but the effect diminished rapidly as the temperature decreased. The addition of iodic acid inhibited attack. Also, up to 200 ppM of fluoride in 70% HNO/sub 3/ had no major effect on the corrosion of either titanium or tantalum. In boiling 8 M HNO/sub 3/-0.05 M HF, Inconel 671 was more resistant than Inconel 690, but both alloys experienced end-grain attack. In the case of Inconel 671, heat treatment was very important; annealed and quenched material was much more resistant than furnace-cooled material.The rate of oxidation of Cr(III) to Cr(VI) increased significantly as the nitric acid concentration increased, and certain forms of ruthenium in the solution seemed to accelerate the rate of formation. Mechanical connectors of T-304L stainless steel experienced end-grain attack on the exposed pipe ends, and seal rings of both stainless steel and a titanium alloy (6% Al-4% V) underwent heavy attack in boiling 8 M HNO/sub 3/.

  6. The Separation Method of Neptunium in Reprocessed Uranium Product by TEVA-UTEVA Column Extraction Chromatography

    Institute of Scientific and Technical Information of China (English)

    JIN; Hua; SU; Yu-lan; YING; Zhe-cong; ZHAO; Sheng-yang

    2012-01-01

    <正>237Np, as a highly toxic nuclide, is limited strictly in the final uranium product of spent nuclear fuel reprocessing plant. Due to the low concentration level of 237Np, which is lower than 2.5 μg/g U, its accurate measurement is one of the most difficult analytical works in

  7. Hybrid reprocessing technology of fluoride volatility and solvent extraction. New reprocessing technology, FLUOREX, for LWR fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Fumio [Hitachi Ltd., Ibaraki (Japan)

    2002-11-01

    Hybrid Process of Fluoride Volatility and Solvent Extraction (FLUOREX) has been objected to develop a low cost reprocessing technology for collection of U and MOX (mixture U and Pu) in LWR fuel cycle. Outline, characteristics, technologies, problems and material balance of FLUOREX are explained. LWR spent fuel consists of about 96% U, 1% Pu and about 3% fission products (FP) and minor actinides (MA). FLUOREX method is hybrid system, which isolates about 90% U at high speed and refines by fluoride volatility process and residue about 10% U, Pu, MA and FP are processed by PUREX method after dissolution in acid. The special features are low cost by small type and lightweight, stable without gas Pu and stop of fluorine gas, reducing load of environment, resistance of nuclear proliferation, application of technologies demonstrated and flexible method for fast reactor. Three problems for development are selective fluoridation of U, transportation of oxides in the fluoride residue and dissolution of transported oxides. The preliminary examination of plan showed 800GWD/t processing volume, 200 day/year operation day, about 51 ten-thousand cubic meter volume of plant, about 1/3 Rokkasho reprocessing plant. (S.Y.)

  8. Reprocessing technology development for irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H.; Sakamoto, N. [Oarai Research Establishment, Ibaraki-ken (Japan); Tatenuma, K. [KAKEN Co., Ibaraki-ken (Japan)] [and others

    1995-09-01

    At present, beryllium is under consideration as a main candidate material for neutron multiplier and plasma facing material in a fusion reactor. Therefore, it is necessary to develop the beryllium reprocessing technology for effective resource use. And, we have proposed reprocessing technology development on irradiated beryllium used in a fusion reactor. The preliminary reprocessing tests were performed using un-irradiated and irradiated beryllium. At first, we performed beryllium separation tests using un-irradiated beryllium specimens. Un-irradiated beryllium with beryllium oxide which is a main impurity and some other impurities were heat-treated under chlorine gas flow diluted with Ar gas. As the results high purity beryllium chloride was obtained in high yield. And it appeared that beryllium oxide and some other impurities were removed as the unreactive matter, and the other chloride impurities were separated by the difference of sublimation temperature on beryllium chloride. Next, we performed some kinds of beryllium purification tests from beryllium chloride. And, metallic beryllium could be recovered from beryllium chloride by the reduction with dry process. In addition, as the results of separation and purification tests using irradiated beryllium specimens, it appeared that separation efficiency of Co-60 from beryllium was above 96%. It is considered that about 4% Co-60 was carried from irradiated beryllium specimen in the form of cobalt chloride. And removal efficiency of tritium from irradiated beryllium was above 95%.

  9. Acquisition of certification on quality assurance system ISO9002 in the Tokai Reprocessing Center

    Energy Technology Data Exchange (ETDEWEB)

    Masui, Jinichi; Kobayashi, Kentaro; Iwasaki, Shogo; Fukanoki, Shinji [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai Reprocessing Center, Tokai, Ibaraki (Japan)

    2002-03-01

    On September 6th 2001, Tokai Reprocessing Center obtained Certification under Quality Assurance System ISO9002: 2nd edition 1994 (JIS Z9902: 1998)-Model for quality assurance in production, installation and servicing. In Tokai Reprocessing Plant, quality assurance activities have been undertaken to contribute to the safety and stable operation of the plant based on the JEAG4101 since 1983. Since 1995, the establishment of a quality assurance system based on the ISO9000 series has been underway, and with the fire and explosion incident at the Bituminization Demonstration Facility as a turning point, this activity has been accelerated and certification obtained under ISO9002. These procedures have strengthened quality assurance activities in the plant operation and transparency of the business has been improved for society through an objective evaluation conducted by the International Organization for Standardization. This report describes the details of quality assurance activities until the acquisition of certification and the outline of the established quality assurance system. (author)

  10. Possible toxic effects from the nuclear reprocessing at Sellafield and Cap de la Hague

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, M.; Coeytaux, X.; Faid, Y.B.; Marignac, Y.; Rouy, E. [Wise, 75 - Paris (France); Thompson, G. [IRSS, Cambridge (United States); Fairlie, I.; Lowry, D.; Sumner, D

    2001-11-15

    The principal aim of this report is to assist the Committee of Petitions of the European Parliament in its consideration of Petition 393/95 brought by Dr. W. Nachtwey. The Petition expresses concerns about radioactive discharges from nuclear reprocessing plants at Sellafield in the UK and La Hague in France, and their possible adverse health effects. Six years after the Petition was introduced, the Petitioner main concerns remain relevant. This report concludes that reprocessing discharges are a valid matter for the Committee consideration. It also concludes that, on balance, the Petitioner's concerns over radioactive discharges from Sellafield and La Hague are justified. The report presents evidence and data on: 1) radioactive discharges from the Sellafield and La Hague sites; 2) resulting nuclide concentrations in environmental media including foodstuffs; 3) radiation doses from nuclide discharges to critical groups near the sites; 4) adverse health effects near the two sites; and 5) resulting collective doses from nuclide discharges. The report also examines a number of current issues in radiobiology concerning health effects from exposure to ionising radiation, in particular genetic and in utero effects. In addition, in accordance with contract specifications, the report examines other major factors that might influence future decision-making on reprocessing. It provides information on the legal framework, the operational history of the plants and the economic case for reprocessing compared with available alternatives for spent nuclear fuel management. The report also makes policy-related recommendations that take into account current knowledge and uncertainties in risk assessment and the availability of alternatives to reprocessing in spent fuel management. (authors)

  11. Handbook on process and chemistry on nuclear fuel reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Atsuyuki (ed.) [Tokyo Univ., Tokyo (Japan); Asakura, Toshihide; Adachi, Takeo (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2001-12-01

    'Wet-type' nuclear fuel reprocessing technology, based on PUREX technology, has wide applicability as the principal reprocessing technology of the first generation, and relating technologies, waste management for example, are highly developed, too. It is quite important to establish a database summarizing fundamental information about the process and the chemistry of 'wet-type' reprocessing, because it contributes to establish and develop fuel reprocessing process and nuclear fuel cycle treating high burn-up UO{sub 2} fuel and spent MOX fuel, and to utilize 'wet-type' reprocessing technology much widely. This handbook summarizes the fundamental data on process and chemistry, which was collected and examined by 'Editing Committee of Handbook on Process and Chemistry of Nuclear Fuel Reprocessing', from FY 1993 until FY 2000. (author)

  12. Structural damage and chemical contaminants on reprocessed arthroscopic shaver blades.

    Science.gov (United States)

    Kobayashi, Masahiko; Nakagawa, Yasuaki; Okamoto, Yukihiro; Nakamura, Shinichiro; Nakamura, Takashi

    2009-02-01

    In response to socioeconomic pressure to cut budgets in medicine, single-use surgical instruments are often reprocessed despite potential biological hazard. To evaluate the quality and contaminants of reprocessed shaver blades. Reprocessed shaver blades have mechanical damage and chemical contamination. Controlled laboratory study. Seven blades and 3 abraders were reprocessed 1 time or 3 times and then were assessed. In the first part of the study, structural damage on the blades after 3 reprocessings was compared to that after 1 reprocessing using optical microscopy. In the second part, surface damage was observed using optical microscopy and scanning electron microscopy; elemental and chemical analyses of contaminants found by the microscopy were performed using scanning electron microscopy/energy dispersive x-ray spectroscopy, scanning Auger microscopy, and Fourier transform infrared spectroscopy. Optical microscopic examination revealed abrasion on the surface of the inner blade and cracks on the inner tube after 1 reprocessing. These changes were more evident after 3 reprocessings. Scanning electron microscopy/energy dispersive x-ray spectroscopy of the inner cutter of the blade reprocessed once showed contaminants containing calcium, carbon, oxygen, and silicon, and Fourier transform infrared spectroscopy demonstrated biological protein consisting mainly of collagen, some type of salts, and polycarbonate used in plastic molding. Scanning electron microscopy/energy dispersive x-ray spectroscopy of the inner cutter of the reprocessed abrader revealed contaminants containing carbon, calcium, phosphorous, and oxygen, and Fourier transform infrared spectroscopy showed H2O, hydroxyapatite, and hydroxyl proteins. Scanning Auger microscopy showed that the tin-nickel plating on the moving blade and abrader was missing in some locations. This is the first study to evaluate both mechanical damage and chemical contaminants containing collagen, hydroxyapatite, and salts

  13. The reprocessing of reactor core materials

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing, E-mail: wang-jing@nuaa.edu.cn [State Key Laboratory of Mechanics and Control of Mechanial Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Liu, Bing; Shao, Youlin; Lu, Zhenming; Liu, Malin [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China)

    2014-05-01

    Generation IV high temperature gas-cooled reactors (HTGR) are preferentially fueled by spherical fuel elements, which are composed of a fuel zone of triso-coated uranium oxide (UO{sub 2}) particles and a matrix graphite layer. Unqualified coated particles and spherical fuel elements unavoidablely occur during the processing of coating UO{sub 2} kernels and embedding the coated particles into the graphite matrix. So it is necessary to reprocess the UO{sub 2} in the unqualified coated particles and spherical fuel elements to maximize the use of the reactor core materials. In this work, we present several methods to: (1) separate the coated particles from the graphite matrix and, (2) expose and recover the UO{sub 2} kernels from the coated particles. The comparison of different methods shows that the thermal oxidation of graphite by a fixed bed burner and the jet grinding of the unqualified coated particles are prosing in practice for the separation of coated particles from the graphite matrix and recovering the uranium dioxide kernels, respectively. Some other methods, such as etching the SiC layer with the active fluorine species in plasma generated by the dielectric barrier discharge (DBD) under the atmosphere also show their great potential values in the reprocessing of reactor core materials, especially for the activated and contaminated fuels.

  14. Plutonium behavior during the early diagenesis of marine sediments: applications to two marine environments labelled by radionuclides released from reprocessing plants; Etude du comportement du plutonium au cours de la diagenese precoce des sediments marins: applications a deux environnements marins marques par les rejets issus d'usines de retraitement de combustibles uses

    Energy Technology Data Exchange (ETDEWEB)

    Gouzy, A

    2004-12-15

    The plutonium released into the English Channel and the Irish Sea by nuclear fuel reprocessing plants is mainly associated to sediments. Nevertheless, this association is partially reversible. This work combines a field study, carried out on the Cumbrian mud patch and the Esk estuary (Eastern Irish Sea), and laboratory experiments performed on carbonaceous coarse-grained sediments collected in the Central Channel. It presents new data on the plutonium solid partition in sediments and suggests realistic scenarios for describing its release from sediments to the water column. The role of reactive sulphides acting as temporary sink phases is shown in anoxic sediments; those sulphides are liable to release dissolved plutonium upon their oxidation. The plutonium is also bound to carbonates within the carbonaceous matrix and as carbonate surface complexes. Conceptual schemes of the behaviour of the plutonium in marine sediments are proposed; they highlight the strong remobilization potential of plutonium from marine sediments to the interstitial water. Its plutonium content can be injected into the overlying water column. (author)

  15. Properties of endotracheal tubes reprocessed by two procedures

    Directory of Open Access Journals (Sweden)

    Elisa Elisa

    2011-04-01

    component. SEM analysis detected some large particles and fissures. EDX analysis on the large particles detected sodium and calcium signals. Altogether, signs of contamination and material damage were very strong. Conclusion Both reprocessing methods of reused EITs gave comparable results on sterility and mechanical behavior, but reprocessing may cause decreased surface and matrix quality.

  16. Study of the {sup 60}Co speciation in the aqueous radioactive waste of the la Hague nuclear reprocessing plant; environmental behaviour after discharges in the waters of the channel; Etude de la speciation du {sup 60}Co dans les effluents de l'usine de retraitement de combustibles irradies de la Hague; devenir apres rejet dans les eaux de la Manche

    Energy Technology Data Exchange (ETDEWEB)

    Gaudaire, J.M

    1999-07-01

    {sup 60}Co is produced as an activation product and is present in the low-level aqueous radioactive waste released from the La Hague plant. At present, the concentration in the sea (non filtered at 0.45 {mu}m) at the Goury site are close to or even below, the detection limit: 0.2 mBq.l{sup -1}. The {sup 60}Co speciation depends on the type of effluent considered: in the effluent A ('active'), the cobalt is in the form of a stable trivalent complex; in the effluent V (to be checked), the cobalt is in majority (50% of the activity release) in the form of particles (>0.45 {mu}m), and then in the form of two soluble species: ionic divalent (Co{sup 2+}) and some stable complexes. The evolution of the reprocessing techniques used does not affect the speciation. So, since the nuclear reprocessing plant started at the La Hague plant in 1966, the chemical species discharged in the sea shows time variation related to the evolution of the type of effluent discharged. Thus, since 1994, the particles of cobalt are the main species discharged in the Channel (the V effluents represent more than 85% of the total {sup 60}Co activity released). The effect of instantaneous dilution into the marine conditions involving a variation of pH, oxido-reduction, ionic strength, a gradient of salinity, does not interfere with the evolution of the chemical species discharged. Nevertheless, during the discharge of the V effluent, the main constituents of the sea water (Mg{sup 2+} and Ca{sup 2+}) go through a precipitation. This comes with the coprecipitation of the ion Co{sup 2+} and with the particles of cobalt (complexes are not affected), and it can be responsible for an increase in the concentration in the particles. The chemical behaviour of the cobalt in the Channel is different from those of conservative element such as antimony. The ionic cobalt and the particles have a small dispersion in the water (cobalt has a very high particle/dissolved distribution factor, it is a non

  17. Reprocessing of research reactor fuel the Dounreay option

    Energy Technology Data Exchange (ETDEWEB)

    Cartwright, P.

    1997-08-01

    Reprocessing is a proven process for the treatment of spent U/Al Research Reactor fuel. At Dounreay 12679 elements have been reprocessed during the past 30 years. For reactors converting to LEU fuel the uranium recovered in reprocessing can be blended down to less than 20% U{sub 235}, enrichment and be fabricated into new elements. For reactors already converted to LEU it is technically possible to reprocess spent silicide fuel to reduce the U{sub 235} burden and present to a repository only stable conditioned waste. The main waste stream from reprocessing which contains the Fission products is collected in underground storage tanks where it is kept for a period of at least five years before being converted to a stable solid form for return to the country of origin for subsequent storage/disposal. Discharges to the environment from reprocessing are low and are limited to the radioactive gases contained in the spent fuel and a low level liquid waste steam. Both of these discharges are independently monitored, and controlled within strict discharge limits set by the UK Government`s Scottish Office. Transportation of spent fuel to Dounreay has been undertaken using many routes from mainland Europe and has utilised over the past few years both chartered and scheduled vessel services. Several different transport containers have been handled and are currently licensed in the UK. This paper provides a short history of MTR reprocessing at Dounreay, and provides information to show reprocessing can satisfy the needs of MTR operators, showing that reprocessing is a valuable asset in non-proliferation terms, offers a complete solution and is environmentally acceptable.

  18. Power Reactor Fuel Reprocessing: Mechanical Phase

    Energy Technology Data Exchange (ETDEWEB)

    Klima, B. B.

    1959-07-01

    The major events in the mechanical phase of the Power Reactor fuels reprocessing program during June were: 1. Feasibility of shearing of fuel elements without disassembly has been demonstrated in tests using porcelain-loaded prototype fuel elements. 2. Further work with the Manco shear was not deemed tb be advisable since permission has been granted to use another shear for cutting UO{sub 2}-loaded fuel elements. 3. Necessity to strip the windows in Building 3048, to sandblast, and repaint them has seriously disrupted occupancy of the cell by July 1. Start of installation probably will not be before August 1. 4. A cold SRE element should be received during July which will permit a direct look a t the problems associated with processing of these irradiated fuel elements. 5. Concurrence with AEC, Atomics International, and ORNL people on the fabrication of a poisoned carrier was obtained and all criteria for the carrier were released and the design was completed. 6. A decision was made to install and use a 24-inch Ty-Sa-Man saw which is on hand and was originally purchased for use in the Segmenting Facility for the SRE reprocessing. This will be used instead of the multipurpose saw to allow more time to refine the design of that saw. The multipurpose saw will be installed for use in subsequent reprocessing programs. This report will chronicle the changes in status which occurred during the calendar month of June. A complete description of each item is not included and may be found in the parent report. The dates indicated on the schedule have slipped since the last report primarily due to increase in scope of the work and postponement on all phases of the work except for the SRE preparations. Twenty-four new items have been added to the schedule. The status of procurement is shown. A total of 93 purchase requests have been turned in to t% Purchasing Department. A total of $199,261.83 has been committed by purchase orders, and a total of 56 purchase orders have been

  19. Preliminary study of the {sup 129}I distribution in environment of La Hague reprocessing plant with the help of a terrestrial moss: Homalotecium sericeum. Study report; Etude preliminaire de la repartition de {sup 129}I dans l'environnement de l'usine de retraitement de La Hague a l'aide d'une mousse terrestre: Homalotecium sericeum. Rapport d'etude

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The preliminary study of the {sup 129}I distribution has allowed to underline the limits of use of a Homalotecium sericeum type terrestrial moss as biological indicator. However, this preliminary study allowed all the same to give a spatial distribution of this radioelement around La Hague reprocessing plant (source term) that underlines the existence of four geographic areas in function of collected activities. The levels are generally under 99 Bq/kg dry. It is recommended to improve the knowledge that we can have of transfers and quantity of iodine 129 from the marine environment to the terrestrial environment, but also, the one that we can have of factors able to modify the spatial distribution of this radionuclide. (N.C.)

  20. Reprocessing and reuse of urological armamentarium: How correct are we!

    Directory of Open Access Journals (Sweden)

    Krutik Vipulbhai Raval

    2017-01-01

    Full Text Available Healthcare is expensive for a large proportion of the population in spite of high per capita income and good health insurance penetration. In an effort to reduce cost of the procedure, reprocessing of devices was started in the late 1970s. Reprocessing practice includes various measures such as proper cleaning, disinfection, and sterilization procedures. As reprocessing is aimed at reducing cost, there is a potential risk of compromising patient safety due to cross contamination after inadequate sterilization. There is also risk of performance alteration of urological reprocessed devices during sterilization/disinfection processing. Therefore, there is a need for formulating proper guidelines to decide methods of reprocessing for various urological equipment. There is also need to discuss the problematic areas that urologists face and to find their solutions. A PubMed search was made in September 2016, using key words “reprocessing of medical devices,” “Single Use Devices,” “methods of reprocessing of devices in clinical practice,” “use of formalin chamber,” “urological disposable sterilization,” etc., After excluding duplicates, all English articles were reviewed by title and abstract. Full texts of selected articles were obtained, and these articles were cross-referenced to find any other related articles. All the articles were reviewed. A product can be reused if it can be economically reprocessed with validated protocols with preservation of its function. There is no reason to discard it after one use. This practice is useful for controlling economics of a urological case and to reduce the financial burden. Current Food and Drug Administration guidelines are stringent. The contamination described to test the sterilization process in the suggested guidelines actually does never exist in clinical practice. Therefore, new guidelines considering the clinical practice scenario are desirable.

  1. Suomi NPP VIIRS Reflective Solar Bands Operational Calibration Reprocessing

    Directory of Open Access Journals (Sweden)

    Slawomir Blonski

    2015-12-01

    Full Text Available Radiometric calibration coefficients for the VIIRS (Visible Infrared Imaging Radiometer Suite reflective solar bands have been reprocessed from the beginning of the Suomi NPP (National Polar-orbiting Partnership mission until present. An automated calibration procedure, implemented in the NOAA (National Oceanic and Atmospheric Administration JPSS (Joint Polar Satellite System operational data production system, was applied to reprocess onboard solar calibration data and solar diffuser degradation measurements. The latest processing parameters from the operational system were used to include corrected solar vectors, optimized directional dependence of attenuation screens transmittance and solar diffuser reflectance, updated prelaunch calibration coefficients without an offset term, and optimized Robust Holt-Winters filter parameters. The parameters were consistently used to generate a complete set of the radiometric calibration coefficients for the entire duration of the Suomi NPP mission. The reprocessing has demonstrated that the automated calibration procedure can be successfully applied to all solar measurements acquired from the beginning of the mission until the full deployment of the automated procedure in the operational processing system. The reprocessed calibration coefficients can be further used to reprocess VIIRS SDR (Sensor Data Record and other data products. The reprocessing has also demonstrated how the automated calibration procedure can be used during activation of the VIIRS instruments on the future JPSS satellites.

  2. Advanced Process Monitoring Techniques for Safeguarding Reprocessing Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Bryan, Samuel A.; Schwantes, Jon M.; Levitskaia, Tatiana G.; Fraga, Carlos G.; Peper, Shane M.

    2010-11-30

    The International Atomic Energy Agency (IAEA) has established international safeguards standards for fissionable material at spent fuel reprocessing plants to ensure that significant quantities of weapons-grade nuclear material are not diverted from these facilities. For large throughput nuclear facilities, it is difficult to satisfy the IAEA safeguards accountancy goal for detection of abrupt diversion. Currently, methods to verify material control and accountancy (MC&A) at these facilities require time-consuming and resource-intensive destructive assay (DA). Leveraging new on-line non destructive assay (NDA) process monitoring techniques in conjunction with the traditional and highly precise DA methods may provide an additional measure to nuclear material accountancy which would potentially result in a more timely, cost-effective and resource efficient means for safeguards verification at such facilities. By monitoring process control measurements (e.g. flowrates, temperatures, or concentrations of reagents, products or wastes), abnormal plant operations can be detected. Pacific Northwest National Laboratory (PNNL) is developing on-line NDA process monitoring technologies, including both the Multi-Isotope Process (MIP) Monitor and a spectroscopy-based monitoring system, to potentially reduce the time and resource burden associated with current techniques. The MIP Monitor uses gamma spectroscopy and multivariate analysis to identify off-normal conditions in process streams. The spectroscopic monitor continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major cold flowsheet chemicals using UV-Vis, Near IR and Raman spectroscopy. This paper will provide an overview of our methods and report our on-going efforts to develop and demonstrate the technologies.

  3. Eye Movement Desensitization and Reprocessing: A Critical Analysis.

    Science.gov (United States)

    Erwin, Terry McVannel

    Since Shapiro's introduction of Eye Movement Desensitization and Reprocessing (EMDR) in 1989, it has been a highly controversial therapeutic technique. Critical reviews of Shapiro's initial study have highlighted many methodological shortcomings in her work. And early empirical research that followed Shapiro's original study has been criticized…

  4. Do the Kepler AGN Light Curves Need Re-processing?

    CERN Document Server

    Kasliwal, Vishal P; Richards, Gordon T; Williams, Joshua; Carini, Michael T

    2015-01-01

    We gauge the impact of spacecraft-induced effects on the inferred variability properties of the light curve of the Seyfert 1 AGN Zw 229-15 observed by \\Kepler. We compare the light curve of Zw 229-15 obtained from the Kepler MAST database with a re-processed light curve constructed from raw pixel data (Williams & Carini, 2015). We use the first-order structure function, $SF(\\delta t)$, to fit both light curves to the damped power-law PSD of Kasliwal, Vogeley & Richards, 2015. On short timescales, we find a steeper log-PSD slope ($\\gamma = 2.90$ to within $10$ percent) for the re-processed light curve as compared to the light curve found on MAST ($\\gamma = 2.65$ to within $10$ percent)---both inconsistent with a damped random walk which requires $\\gamma = 2$. The log-PSD slope inferred for the re-processed light curve is consistent with previous results (Carini & Ryle, 2012, Williams & Carini, 2015) that study the same re-processed light curve. The turnover timescale is almost identical for bot...

  5. Consolidated Fuel Reprocessing Program. Progress report, January 1 to March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Unger, W.E. (comp.)

    1979-06-01

    On Oct. 1, 1978, a transition phase was begun to concentrate all US fuel reprocessing research in one major program, the Consolidated Fuel Reprocessing Program (CFRP). The CFRP is organized into the following: process R and D, engineering research, engineering systems, technical support, HTGR fuel reprocessing, and pyrochemical and dry processing methods. Progress is reported in each area. (DLC)

  6. Reprocessing VIIRS sensor data records from the early SNPP mission

    Science.gov (United States)

    Blonski, Slawomir; Cao, Changyong

    2016-10-01

    The Visible-Infrared Imaging Radiometer Suite (VIIRS) instrument onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite began acquiring Earth observations in November 2011. VIIRS data from all spectral bands became available three months after launch when all infrared-band detectors were cooled down to operational temperature. Before that, VIIRS sensor data record (SDR) products were successfully generated for the visible and near infrared (VNIR) bands. Although VIIRS calibration has been significantly improved through the four years of the SNPP mission, SDR reprocessing for this early mission phase has yet to be performed. Despite a rapid decrease in the telescope throughput that occurred during the first few months on orbit, calibration coefficients for the VNIR bands were recently successfully generated using an automated procedure that is currently deployed in the operational SDR production system. The reanalyzed coefficients were derived from measurements collected during solar calibration events that occur on every SNPP orbit since the beginning of the mission. The new coefficients can be further used to reprocess the VIIRS SDR products. In this study, they are applied to reprocess VIIRS data acquired over pseudo-invariant calibration sites Libya 4 and Sudan 1 in Sahara between November 2011 and February 2012. Comparison of the reprocessed SDR products with the original ones demonstrates improvements in the VIIRS calibration provided by the reprocessing. Since SNPP is the first satellite in a series that will form the Joint Polar Satellite System (JPSS), calibration methods developed for the SNPP VIIRS will also apply to the future JPSS measurements.

  7. Reprocessing of LEU U-Mo Dispersion and Monolithic Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Vandegrift, G.F.; Jerden, J.; Stepinski, D.C.; Figueroa, J.; Williamson, M.A.; Kleeck, M.A. Van; Blaskovitz, R.J.; Ziegler, A.J.; Maggos, L.E.; Swanson, J.; Fortner, J.; Bakel, A.J. [Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States)

    2011-07-01

    For conversion of high-performance research reactors from high-enriched uranium (HEU) to low-enriched uranium (LEU) fuel, a fuel material with a higher density than uranium aluminide is required. Development studies are underway to develop U-Mo dispersion and monolithic fuels for conversion of several high- performance reactors. For dispersion fuels, development is narrowing down to a composition of U-7Mo dispersed in an aluminium matrix containing {approx}5% silicon. For monolithic fuels to be used in high performance research reactors in the United States, a zirconium-bonded U-10Mo foil appears to be the fuel of choice. For conversion to be realized a back-end disposition path is required for both fuels; one disposition pathway is reprocessing. Argonne National Laboratory is developing a pyroprocess for reprocessing spent monolithic fuel. Pyroprocessing was chosen over conventional aqueous solvent extraction due to the necessity of adding fluoride to the fuel-dissolution solution in order to dissolve the zirconium bonding layer on the U-Mo fuel. The proposed flowsheet and development activities will be described. A literature survey points to the ability to reprocess U-Mo dispersion fuels by an aqueous process, but due to several special characteristics of the fuel, the solvent-extraction flowsheets will be a departure from that normally used for the reprocessing of power reactor fuel. Special concerns that must be addressed in reprocessing these fuels are, for example, the low solubilities of uranyl molybdate, molybdic acid, and silicic acid in nitric acid solutions. This paper will address these concerns and development activities required to overcome them. (author)

  8. Combination and long term stability of the IGS Reprocessing campaign

    Science.gov (United States)

    Booker, David; Clarke, Peter J.; Lavallée, David A.

    2010-05-01

    During the relatively short life of the Global Positioning System (GPS) there have been several changes to the analysis procedure, leading to inhomogeneous coordinate time series. Although they have reduced systematic errors in more recent solutions, these changes have modified the apparent periodic signals observed and led to spurious discontinuities. The International GNSS Service (IGS) reprocessing campaign uses the latest operational models and techniques to reprocess the back catalogue of GPS data to produce remove inconsistencies caused by the various model changes, thus producing a homogeneous time series of station coordinates and Earth Rotation Parameters (ERPs). Weekly coordinate and ERP solutions from up to 11 reprocessing analysis centres (ACs) have been aligned to the ITRF and combined using the TANYA software in a rigorous weighted least-squares solution. Analysis of the time series of station coordinates and Helmert transformation parameters between the combined solution and the ITRF shows a at least a 50 percent improvement in the stability of the reprocessed weekly solutions compared with earlier operational products. There is a gradual decrease in the weighted root mean square coordinate difference, both between the combined weekly solutions and the ITRF and between the individual AC solutions and their weekly combination, which reaches a minimum around the end of 2005 with a slight increase thereafter. We observe clear differences in the periodicity of Helmert transformation parameters between the individual AC solutions and the combined solution, which presumably result from variations in AC processing strategy. There is a clear annual or near annual periodic variation in the scale difference between the combined solution and the ITRF05 and some less clear variation between the translation parameters, which needs further analysis as to its cause. Keywords: GPS, ITRF, IGS reprocessing campaign, periodic errors

  9. Symposium on the reprocessing of irradiated fuels. Book 3, Session V

    Energy Technology Data Exchange (ETDEWEB)

    None

    1958-12-31

    Book three of this conference has a single-focused session V entitled Engineering and Economics, with 16 papers. The session is concerned with several phases of chemical reprocessing of fuels which are of a general nature. Hot labs, radiochemical analytical facilities, and high level development cells are described. Dissolution equipment, contactors, flow generation, measurement, and control equipment, samplers, connectors, carriers, valves, filters, and hydroclones are described and discussed. Papers are included on: radiation safety, chemical safety, radiochemical plant operating experience in the U.S., and heavy element isotopic buildup. The general economics of solvent extraction processing is discussed, and capital and operating costs for several U. S. plants given. The Atomic Energy Commission's chemical processing programs and administration are evaluated and the services offered and charges therefore are listed.

  10. Analysis of triso packing fraction and fissile material to DB-MHR using LWR reprocessed fuel

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Clarysson A.M. da; Pereira, Claubia; Costa, Antonella L.; Veloso, Maria Auxiliadora F.; Gual, Maritza R., E-mail: clarysson@nuclear.ufmg.br, E-mail: claubia@nuclear.ufmg.br, E-mail: antonella@nuclear.ufmg.br, E-mail: dora@nuclear.ufmg.br, E-mail: maritzargual@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear

    2013-07-01

    Gas-cooled and graphite-moderated reactor is being considered the next generation of nuclear power plants because of its characteristic to operate with reprocessed fuel. The typical fuel element consists of a hexagonal block with coolant and fuel channels. The fuel pin is manufactured into compacted ceramic-coated particles (TRISO) which are used to achieve both a high burnup and a high degree of passive safety. This work uses the MCNPX 2.6.0 to simulate the active core of Deep Burn Modular Helium Reactor (DB-MHR) employing PWR (Pressurized Water Reactor) reprocessed fuel. However, before a complete study of DB-MHR fuel cycle and recharge, it is necessary to evaluate the neutronic parameters to some values of TRISO Packing Fractions (PF) and Fissile Material (FM). Each PF and FM combination would generate the best behaviour of neutronic parameters. Therefore, this study configures several PF and FM combinations considering the heterogeneity of TRISO layers and lattice. The results present the best combination of PF and FM values according with the more appropriated behaviour of the neutronic parameters during the burnup. In this way, the optimized combination can be used to future works of MHR fuel cycle and recharge. (author)

  11. (reprocessed)CAGE_peaks_annotation - FANTOM5 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us FANTOM5 (reprocessed)CAGE_peaks_annotation Data detail Data name (reprocessed)CAGE_peaks_ann... - - Description of data contents Annotation of human and mouse CAGE peaks and RNA transcriptional initiatio...rence sequences (hg38/mm10). Data file File name: (reprocessed)CAGE_peaks_annotation (Homo sapiens) File URL...: ftp://ftp.biosciencedbc.jp/archive/fantom5/datafiles/reprocessed/hg38_latest/extra/CAGE_peaks_annotation/ ...File size: 16 MB File name: (reprocessed)CAGE_peaks_annotation (Mus musculus) Fil

  12. Plasma Mass Filters For Nuclear Waste Reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Fetterman, Abraham J. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Fisch, Nathaniel J. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    2011-05-01

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  13. Plasma Mass Filters For Nuclear Waste Reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-05-26

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  14. ATLAS level-1 calorimeter trigger: Monitoring and data reprocessing

    Science.gov (United States)

    Dimond, David; Hong, Tae; Carlson, Benjamin; Atlas Collaboration

    2017-01-01

    We present the monitoring and data reprocessing for the calorimeter-based hardware level-1 trigger system (L1Calo) for the ATLAS experiment. This trigger system was upgraded after the Run-1 data taking period (2009-2012) to prepare for Run-2 (2015-current), which allowed better control the event rates for algorithms based on jets and/or missing energy. Monitoring tools for the upgraded system is described. We also present a new offline tool to reprocess previous data samples with altered L1Calo settings, such as calibration constants and noise cuts. The samples are used to study the dependence of the event rates and signal efficiencies on the settings. The studies can help plan the appropriate L1Calo settings for upcoming data taking periods as well as for future runs.

  15. Inspiration fra New York - udforskende læreprocesser

    DEFF Research Database (Denmark)

    Jørgensen, Lone Tang

    2017-01-01

    Udforskende læreprocesser er inspireret af John Deweys filosofi og pædagogik og bygger på en didaktisk tilrettelæggelse, der vægter den demokratiske dannelse og børnenes medindflydelse på det, der arbejdes med i klasserummet. Børnenes erfaringer, interesser og engagement er selve afsættet...... for tilrettelæggelse af læreprocesserne. Med udgangspunkt i Deweys ideer om skolen, baseret på den eksperimentelle metode, præsenteres Paula Rogovins arbejde på Manhattan New School i New York som et eksempel på, hvordan arbejdet med udforskende læreprocesser kan tilrettelægges....

  16. Æstetiske læreprocesser som performative handlinger

    DEFF Research Database (Denmark)

    Illeris, Helene

    2009-01-01

      Med afsæt i en analyse af et samtidskunstværk undersøger artiklen nogle af de konsekvenser, forskellen mellem en repræsentativ og en performativ tilgang til begrebet form kan tænkes at have for begrebet 'æstetiske læreprocesser'. Teoretisk bygger artiklen på den amerikanske kønsforsker Judith B...

  17. China Reprocessing and Radiochemistry Laboratory(CRARL) Progress

    Institute of Scientific and Technical Information of China (English)

    WANG; Xiao-rong; LI; Wei-min; BIAN; Xiao-yan; ZHU; Ling-fan

    2015-01-01

    According to the arrangement of the Radiochemistry Department’s annual work conference,the main tasks of China Reprocessing and Radiochemistry Laboratory(CRARL)in 2015 are as follows.In the first half of the year,strive 100 days to prepare for the hot test by strengthening the team’s cohesion and overcoming the difficulties.In the second half of the year,escort the

  18. Study of an ADS Loaded with Thorium and Reprocessed Fuel

    Directory of Open Access Journals (Sweden)

    Graiciany de Paula Barros

    2012-01-01

    Full Text Available Accelerator-driven systems (ADSs are investigated for long-lived fission product transmutation and fuel regeneration. The aim of this paper is to investigate the nuclear fuel evolution and the neutronic parameters of a lead-cooled accelerator-driven system used for fuel breeding. The fuel used in some fuel rods was T232hO2 for U233 production. In the other fuel rods was used a mixture based upon Pu-MA, removed from PWR-spent fuel, reprocessed by GANEX, and finally spiked with thorium or depleted uranium. The use of reprocessed fuel ensured the use of T232hO2 without the initial requirement of U233 enrichment. In this paper was used the Monte Carlo code MCNPX 2.6.0 that presents the depletion/burnup capability, combining an ADS source and kcode-mode (for criticality calculations. The multiplication factor (keff evolution, the neutron energy spectra in the core at BOL, and the nuclear fuel evolution during the burnup were evaluated. The results indicated that the combined use of T232hO2 and reprocessed fuel allowed U233 production without the initial requirement of U233 enrichment.

  19. Noble Gas Measurement and Analysis Technique for Monitoring Reprocessing Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Charlton, William S [Univ. of California, Berkeley, CA (United States)

    1999-09-01

    An environmental monitoring technique using analysis of stable noble gas isotopic ratios on-stack at a reprocessing facility was developed. This technique integrates existing technologies to strengthen safeguards at reprocessing facilities. The isotopic ratios are measured using a mass spectrometry system and are compared to a database of calculated isotopic ratios using a Bayesian data analysis method to determine specific fuel parameters (e.g., burnup, fuel type, fuel age, etc.). These inferred parameters can be used by investigators to verify operator declarations. A user-friendly software application (named NOVA) was developed for the application of this technique. NOVA included a Visual Basic user interface coupling a Bayesian data analysis procedure to a reactor physics database (calculated using the Monteburns 3.01 code system). The integrated system (mass spectrometry, reactor modeling, and data analysis) was validated using on-stack measurements during the reprocessing of target fuel from a U.S. production reactor and gas samples from the processing of EBR-II fast breeder reactor driver fuel. These measurements led to an inferred burnup that matched the declared burnup with sufficient accuracy and consistency for most safeguards applications. The NOVA code was also tested using numerous light water reactor measurements from the literature. NOVA was capable of accurately determining spent fuel type, burnup, and fuel age for these experimental results. Work should continue to demonstrate the robustness of this system for production, power, and research reactor fuels.

  20. Review Of Decommissioning Experience In Spent Fuel Reprocessing Facilities at Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Guiberteau, Ph.; Vendroux, M. [CODEM GIE, BP 21004, 30201 Bagnols sur Ceze cedex (France); Berlan, C. [COGEMA Reprocessing Business Unit, 2, rue Paul Dautier - BP.4, 78141 Velizy Cedex (France)

    2003-07-01

    Final shutdown and decontamination, dismantling, and legacy waste retrieval programs are currently in progress at the Marcoule nuclear fuel reprocessing plant in southern France. They began in 1998 and will continue until about 2040. CODEM is the funding, decision-making and inspection organization for these decommissioning operations, COGEMA is the nuclear operator and the industrial contractor. After an overview of the facilities, the project and the participants, most significant operations are discussed in greater detail. High activity levels and the presence of large quantities of {alpha}-emitters complicate operating and waste treatment conditions. The major issues impacting cost-effectiveness-scenario, waste removal and project organization will be highlighted in the conclusion.

  1. Safe storage time for reprocessed flexible endoscopes: a systematic review.

    Science.gov (United States)

    Schmelzer, Marilee; Daniels, Glenda; Hough, Helen

    2015-09-01

    Flexible endoscopes are used to diagnose and treat gastrointestinal and pulmonary diseases. They have narrow, internal channels which are used to insert instruments, air and water into hollow organs and to remove tissues and secretions. Since endoscopes are contaminated during use and have heat sensitive components that cannot be sterilized, they are reprocessed with cleaning and high-level disinfection to destroy microorganisms. Knowing how long reprocessed endoscopes can be safely stored is essential for preventing infection and decreasing unnecessary costs. The objective was to systematically review the best available evidence related to safe storage time (in days) of flexible endoscopes that have undergone reprocessing in order to determine when they can be safely used again without posing any risk of contamination from pathogens. The types of equipment were flexible endoscopes that had been reprocessed according to recommended guidelines, stored for a specified period of time, and tested for microorganisms.The intervention was the length of time (in days) that reprocessed endoscopes were appropriately stored before use.This review included non-randomized controlled trials and prospective cohort studies.This review considered studies that included the outcome measure: microbial growth on endoscopes which was measured with microbiological cultures. The search strategy aimed to find studies in English and Spanish and included published and unpublished studies from 1990 to 2014. An initial search of CINAHL, MEDLINE/PUBMed and EMBASE was conducted followed by an analysis of the text words contained in the title and abstract and index terms used to describe the articles. Next, a search using all identified keywords and index terms was undertaken across all included databases. Then, the reference lists of all identified reports and articles were searched for additional studies. A citation search was performed in order to find additional studies that cited those

  2. High-level disinfection of gastrointestinal endoscope reprocessing.

    Science.gov (United States)

    Chiu, King-Wah; Lu, Lung-Sheng; Chiou, Shue-Shian

    2015-02-20

    High level disinfection (HLD) of the gastrointestinal (GI) endoscope is not simply a slogan, but rather is a form of experimental monitoring-based medicine. By definition, GI endoscopy is a semicritical medical device. Hence, such medical devices require major quality assurance for disinfection. And because many of these items are temperature sensitive, low-temperature chemical methods, such as liquid chemical germicide, must be used rather than steam sterilization. In summarizing guidelines for infection prevention and control for GI endoscopy, there are three important steps that must be highlighted: manual washing, HLD with automated endoscope reprocessor, and drying. Strict adherence to current guidelines is required because compared to any other medical device, the GI endoscope is associated with more outbreaks linked to inadequate cleaning or disinfecting during HLD. Both experimental evaluation on the surveillance bacterial cultures and in-use clinical results have shown that, the monitoring of the stringent processes to prevent and control infection is an essential component of the broader strategy to ensure the delivery of safe endoscopy services, because endoscope reprocessing is a multistep procedure involving numerous factors that can interfere with its efficacy. Based on our years of experience in the surveillance of culture monitoring of endoscopic reprocessing, we aim in this study to carefully describe what details require attention in the GI endoscopy disinfection and to share our experience so that patients can be provided with high quality and safe medical practices. Quality management encompasses all aspects of pre- and post-procedural care including the efficiency of the endoscopy unit and reprocessing area, as well as the endoscopic procedure itself.

  3. Consolidated fuel reprocessing program. Progress report, January 1-March 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-06-01

    Progress and activities are reported on process development, laboratory R and D, engineering research, engineering systems, Integrated Equipment Test (IET) facility operations, and HTGR fuel reprocessing. (DLC)

  4. Eye movement desensitization and reprocessing: a conceptual framework.

    Science.gov (United States)

    Menon, Sukanya B; Jayan, C

    2010-07-01

    Eye movement desensitization and reprocessing (EMDR) is a method which was initially used for the treatment of post-traumatic stress disorder. But it is now being used in different therapeutic situations. EMDR is an eight-phase treatment method. History taking, client preparation, assessment, desensitization, installation, body scan, closure and reevaluation of treatment effect are the eight phases of this treatment which are briefly described. A case report is also depicted which indicates the efficacy of EMDR. The areas where EMDR is used and the possible ways through which it is working are also described.

  5. Sexual violence: psychiatric healing with eye movement reprocessing and desensitization.

    Science.gov (United States)

    Posmontier, Bobbie; Dovydaitis, Tiffany; Lipman, Kenneth

    2010-08-01

    Sexual violence, which affects one in three women worldwide, can result in significant psychiatric morbidity and suicide. Eye movement desensitization and reprocessing (EMDR) offers health care providers the option of a brief psychiatric intervention that can result in psychiatric healing in as few as four sessions. Because health care providers often hear stories of sexual violence from their patients, they are in an ideal position to make recommendations for treatment. The purpose of this article is to introduce health care providers to the technique of EMDR, review safety and appropriateness, and discuss clinical and research implications.

  6. Eye movement desensitization and reprocessing: A conceptual framework

    Directory of Open Access Journals (Sweden)

    Menon Sukanya

    2010-01-01

    Full Text Available Eye movement desensitization and reprocessing (EMDR is a method which was initially used for the treatment of post-traumatic stress disorder. But it is now being used in different therapeutic situations. EMDR is an eight-phase treatment method. History taking, client preparation, assessment, desensitization, installation, body scan, closure and reevaluation of treatment effect are the eight phases of this treatment which are briefly described. A case report is also depicted which indicates the efficacy of EMDR. The areas where EMDR is used and the possible ways through which it is working are also described.

  7. Selected studies in HTGR reprocessing development. [KA2C process

    Energy Technology Data Exchange (ETDEWEB)

    Notz, K.J.

    1976-03-01

    Recent work at ORNL on hot cell studies, off-gas cleanup, and waste handling is reviewed. The work includes small-scale burning tests with irradiated fuels to study fission product release, development of the KALC process for the removal of /sup 85/Kr from a CO/sub 2/ stream, preliminary work on a nonfluidized bed burner, solvent extraction studies including computer modeling, characterization of reprocessing wastes, and initiation of a development program for the fixation of /sup 14/C as CaCO/sub 3/. (auth)

  8. Extending Spent Fuel Storage until Transport for Reprocessing or Disposal

    Energy Technology Data Exchange (ETDEWEB)

    Carlsen, Brett; Chiguer, Mustapha; Grahn, Per; Sampson, Michele; Wolff, Dietmar; Bevilaqua, Arturo; Wasinger, Karl; Saegusa, Toshiari; Seelev, Igor

    2016-09-01

    Spent fuel (SF) must be stored until an end point such as reprocessing or geologic disposal is imple-mented. Selection and implementation of an end point for SF depends upon future funding, legisla-tion, licensing and other factors that cannot be predicted with certainty. Past presumptions related to the availability of an end point have often been wrong and resulted in missed opportunities for properly informing spent fuel management policies and strategies. For example, dry cask storage systems were originally conceived to free up needed space in reactor spent fuel pools and also to provide SFS of up to 20 years until reprocessing and/or deep geological disposal became available. Hundreds of dry cask storage systems are now employed throughout the world and will be relied upon well beyond the originally envisioned design life. Given present and projected rates for the use of nuclear power coupled with projections for SF repro-cessing and disposal capacities, one concludes that SF storage will be prolonged, potentially for several decades. The US Nuclear Regulatory Commission has recently considered 300 years of storage to be appropriate for the characterization and prediction of ageing effects and ageing management issues associated with extending SF storage and subsequent transport. This paper encourages addressing the uncertainty associated with the duration of SF storage by de-sign – rather than by default. It suggests ways that this uncertainty may be considered in design, li-censing, policy, and strategy decisions and proposes a framework for safely extending spent fuel storage until SF can be transported for reprocessing or disposal – regardless of how long that may be. The paper however is not intended to either encourage or facilitate needlessly extending spent fuel storage durations. Its intent is to ensure a design and safety basis with sufficient margin to accommodate the full range of potential future scenarios. Although the focus is primarily on

  9. Seasonal signals in the reprocessed GPS coordinate time series

    Science.gov (United States)

    Kenyeres, A.; van Dam, T.; Figurski, M.; Szafranek, K.

    2008-12-01

    The global (IGS) and regional (EPN) CGPS time series have already been studied in detail by several authors to analyze the periodic signals and noise present in the long term displacement series. The comparisons indicated that the amplitude and phase of the CGPS derived seasonal signals mostly disagree with the surface mass redistribution models. The CGPS results are highly overestimating the seasonal term, only about 40% of the observed annual amplitude can be explained with the joint contribution of the geophysical models (Dong et al. 2002). Additionally the estimated amplitudes or phases are poorly coherent with the models, especially at sites close to coastal areas (van Dam et al, 2007). The conclusion of the studies was that the GPS results are distorted by analysis artifacts (e.g. ocean tide loading, aliasing of unmodeled short periodic tidal signals, antenna PCV models), monument thermal effects and multipath. Additionally, the GPS series available so far are inhomogeneous in terms of processing strategy, applied models and reference frames. The introduction of the absolute phase center variation (PCV) models for the satellite and ground antennae in 2006 and the related reprocessing of the GPS precise orbits made a perfect ground and strong argument for the complete re-analysis of the GPS observations from global to local level of networks. This enormous work is in progress within the IGS and a pilot analysis was already done for the complete EPN observations from 1996 to 2007 by the MUT group (Military University of Warsaw). The quick analysis of the results proved the expectations and the superiority of the reprocessed data. The noise level (weekly coordinate repeatability) was highly reduced making ground for the later analysis on the daily solution level. We also observed the significant decrease of the seasonal term in the residual coordinate time series, which called our attention to perform a repeated comparison of the GPS derived annual periodicity

  10. Mechanical reprocessing of contaminated bone-cutters according to Lindemann

    OpenAIRE

    Burda, Yvonne

    2016-01-01

    Surgical bone-cutters according to Lindemann play a central role during dental surgical treatments. Bone-cutters become contaminated with blood, saliva, bones and microorganisms. For reuse on patients medical devices have to be reprocessed according to the KRINKO-/BfArM-recommendation from 2012. A "residue-free" cleaning must be ensured for rotating surgical instruments, which is to be investigated. 61 bone-cutters were used as test instruments, made of tungsten-carbide and 63 with a ZrN-hard...

  11. Fast and Simultaneous Determination of Pu(Ⅳ) and Nitric Acid in Spent Nuclear Fuel Reprocessing Sample by Near Infrared Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    LI; Ding-ming; ZHANG; Li-hua; WANG; Ling; GONG; Yan-ping; FAN; De-jun; YI; Bao-shan; CHEN; Qiang; JI; Yong-chao; WU; Ji-zong

    2013-01-01

    Determination of Pu(Ⅳ)and nitric acid plays significant role in nuclear fuel reprocessing plant to control process accurately and timely.Coupling C-T fixed-type grating with InGaAs detector,a new novel analytical system for simultaneous measurement of nitric acid and Pu(Ⅳ)was developed by our working group.After obtaining near infrared absorptive spectra by the spectroscopic instrument,the spectra data

  12. Using Eye Movement Desensitization and Reprocessing To Enhance Treatment of Couples.

    Science.gov (United States)

    Protinsky, Howard; Sparks, Jennifer; Flemke, Kimberly

    2001-01-01

    Eye Movement Desensitization and Reprocessing (EMDR) as a clinical technique may enhance treatment effectiveness when applied in couple therapy that is emotionally and experientially oriented. Clinical experience indicates EMDR-based interventions are useful for accessing and reprocessing intense emotions in couple interactions. EMDR can amplify…

  13. 76 FR 13605 - Notice of Availability of Draft Waste Incidental to Reprocessing Evaluation for the Vitrification...

    Science.gov (United States)

    2011-03-14

    ... waste from reprocessing of spent nuclear fuel and certain treatment material) at the West Valley... a solid glass waste form. DOE used the vitrification melter as part of this process, specifically to melt glass frit (material used in making glass) together with reprocessing waste sludge and...

  14. 76 FR 34007 - Draft Regulatory Basis for a Potential Rulemaking on Spent Nuclear Fuel Reprocessing Facilities

    Science.gov (United States)

    2011-06-10

    ...: NUREG-1909, a white paper authored by the Advisory Committee on Nuclear Waste and Materials, titled... waste through developing more sophisticated reprocessing technologies. During the Bush Administration... reprocessing spent fuel and deploying fast reactors to burn long-lived actinides. In response to these...

  15. Consolidated fuel reprocessing. Program progress report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    This progress report is compiled from major contributions from three programs: (1) the Advanced Fuel Recycle Program at ORNL; (2) the Converter Fuel Reprocessing Program at Savannah River Laboratory; and (3) the reprocessing components of the HTGR Fuel Recycle Program, primarily at General Atomic and ORNL. The coverage is generally overview in nature; experimental details and data are limited.

  16. Defining the Costs of Reusable Flexible Ureteroscope Reprocessing Using Time-Driven Activity-Based Costing.

    Science.gov (United States)

    Isaacson, Dylan; Ahmad, Tessnim; Metzler, Ian; Tzou, David T; Taguchi, Kazumi; Usawachintachit, Manint; Zetumer, Samuel; Sherer, Benjamin; Stoller, Marshall; Chi, Thomas

    2017-09-20

    Careful decontamination and sterilization of reusable flexible ureteroscopes used in ureterorenoscopy cases prevent the spread of infectious pathogens to patients and technicians. However, inefficient reprocessing and unavailability of ureteroscopes sent out for repair can contribute to expensive operating room (OR) delays. Time-driven activity-based costing (TDABC) was applied to describe the time and costs involved in reprocessing. Direct observation and timing were performed for all steps in reprocessing of reusable flexible ureteroscopes following operative procedures. Estimated times needed for each step by which damaged ureteroscopes identified during reprocessing are sent for repair were characterized through interviews with purchasing analyst staff. Process maps were created for reprocessing and repair detailing individual step times and their variances. Cost data for labor and disposables used were applied to calculate per minute and average step costs. Ten ureteroscopes were followed through reprocessing. Process mapping for ureteroscope reprocessing averaged 229.0 ± 74.4 minutes, whereas sending a ureteroscope for repair required an estimated 143 minutes per repair. Most steps demonstrated low variance between timed observations. Ureteroscope drying was the longest and highest variance step at 126.5 ± 55.7 minutes and was highly dependent on manual air flushing through the ureteroscope working channel and ureteroscope positioning in the drying cabinet. Total costs for reprocessing totaled $96.13 per episode, including the cost of labor and disposable items. Utilizing TDABC delineates the full spectrum of costs associated with ureteroscope reprocessing and identifies areas for process improvement to drive value-based care. At our institution, ureteroscope drying was one clearly identified target area. Implementing training in ureteroscope drying technique could save up to 2 hours per reprocessing event, potentially preventing expensive OR delays.

  17. Computer code system for the R and D of nuclear fuel cycle with fast reactor. 4. Development of an object-oriented analysis code for estimation of the material balance in the pyrochemical reprocessing process

    Energy Technology Data Exchange (ETDEWEB)

    Okamura, Nobuo; Sato, Koji [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2002-03-01

    An analysis code using the object-oriented software EX{center_dot}TD Ver.4 was developed for the estimation of material balance for the system design of the pyrochemical reprocessing plants consisting of batch processes. This code can also estimate the radioactivity balance, decay heat balance and holdup, and easily cope with the improvement of the process flow, and so on. An example of the material balance estimation under the consideration of the solvent (molten salt) recycling time is presented for the oxide electrowinning reprocessing system designed in the feasibility study of the FBR fuel cycle system. The results indicate the possibility of reduction of the vitrified waste form volume due to the extension of the recycling time of the solvent. This paper describes the outline of the code and estimation of the material balance in the oxide electrowinning reprocessing system under consideration of the solvent recycling time. (author)

  18. Origin, development, and evolution of eye movement desensitization and reprocessing

    Directory of Open Access Journals (Sweden)

    Carolina Marín

    2016-12-01

    Full Text Available Eye movement desensitization and reprocessing (EMDR has led to a great number of studies since its appearance in 1989. The aim of this article is to describe EMDR development and evolution to the present day. With this purpose a search was carried out on MEDLINE and PsycINFO with the entry "eye movement desensitization". After revising the resulting 797 articles, those that because of their relevance explained best the development and evolution of the technique were chosen and shaped into a lifeline graphically representing the history of EMDR. Despite the fact that during the first years the focus of research was on the validation of the technique for post-traumatic disorder (PTSD, it was soon applied to other areas. Only 14% of the articles found account for controlled studies. Up to date, in spite of the effectiveness of EMDR for the treatment of PTSD that has been proven, many different explanatory hypotheses are still up for discussion.

  19. Analysis of nuclear proliferation resistance reprocessing and recycling technologies

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Paviet-Hartmann; Gary Cerefice; Marcela Stacey; Steven Bakhtiar

    2011-05-01

    The PUREX process has been progressively and continuously improved during the past three decades, and these improvements account for successful commercialization of reprocessing in a few countries. The renewed interest in nuclear energy and the international growth of nuclear electricity generation do not equate – and should not be equated -with increasing proliferation risks. Indeed, the nuclear renaissance presents a unique opportunity to enhance the culture of non-proliferation. With the recent revival of interest in nuclear technology, technical methods for prevention of nuclear proliferation are being revisited. Robust strategies to develop new advanced separation technologies are emerging worldwide for sustainability and advancement of nuclear energy with enhanced proliferation resistance. On the other hand, at this moment, there are no proliferation resistance advanced technologies. . Until now proliferation resistance as it applies to reprocessing has been focused on not separating a pure stream of weapons-usable plutonium. France, as an example, has proposed a variant of the PUREX process, the COEX TM process, which does not result on a pure plutonium product stream. A further step is to implement a process based on group extraction of actinides and fission products associated with a homogeneous recycling strategy (UNEX process in the US, GANEX process in France). Such scheme will most likely not be deployable on an industrial scale before 2030 or so because it requires intensive R&D and robust flowsheets. Finally, future generation recycling schemes will handle the used nuclear fuel in fast neutron reactors. This means that the plutonium throughput of the recycling process may increase. The need is obvious for advanced aqueous recycling technologies that are intrinsically more proliferation resistant than the commercial PUREX process. In this paper, we review the actual PUREX process along with the advanced recycling technologies that will enhance

  20. Neutronic evaluation of thorium and reprocessed fuels by GANEX and UREX+ in ADS

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Graiciany, E-mail: graiciany.barros@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil); Velasquez, Carlos E.; Pereira, Claubia; Veloso, Maria Auxiliadora F.; Costa, Antonella L., E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Escola de Engenharia. Departamento de Engenharia Nuclear

    2015-07-01

    A conceptual design of accelerator driven systems (ADS) that utilize thorium and reprocessed fuel in order to produce {sup 233}U and to transmute high radiotoxicity isotopes in spent nuclear fuel has been proposed. The use of thorium and reprocessed fuel in an ADS is one of the clean, safe, and economical solutions for the problem of nuclear waste. In this study, the aim was to compare the neutronic behavior of the core using spent fuel reprocessed by GANEX (Group ActiNide EXtraction) and UREX+ (Uranium Extraction), both spiked with thorium. The simulated design was a cylinder fuelled with a hexagonal lattice with 156 fuel rods. One of the studied fuels was a mixture based upon Pu-MA, removed from PWR-spent fuel, theoretically reprocessed by GANEX reprocessing and spiked with 82% of thorium. The other fuel was a reprocessed fuel obtained theoretically from UREX+ (Uranium Extraction) process and spiked with 82% of thorium. Monteburns 2.0 (MCNP5/ORIGEN 2.1) code was used to simulate the neutronic aspects of the fuels. The multiplication factors, the neutron spectra, and the nuclear fuel evolution were analyzed during 10 years of burn-up. The results allowed comparing the two reprocessing techniques, the {sup 233}U production and the reduction in the amount of high radiotoxicity isotopes of these fuels. (author)

  1. A step towards closing the CANDU fuel cycle: an innovative scheme for reprocessing used CANDU fuel

    Energy Technology Data Exchange (ETDEWEB)

    Collins, F.; Lister, D. [Univ. of New Brunswick, UNB Nuclear, Dept. of Chemical Engineering, Fredericton, New Brunswick (Canada)

    2011-07-01

    Disposal versus reprocessing costs for used CANDU fuel was recently discussed by Rozon and Lister in a report produced for the Nuclear Waste Management Organization (NWMO). Their study discussed the economic incentives for reprocessing, not for the recovery of fissile uranium but for the recovery of plutonium ash. A $370/kg break-even price of uranium was calculated, and their model was found to be very sensitive to the reprocessing costs of the chosen technology. Findings were consistent with earlier studies done by Harvard University. Various reprocessing technologies (most based on solvent extraction) have been in use for many decades, but there appears to be no conceptual engineering study available in the open literature for a spent fuel reprocessing facility - one that includes process flows, operating costs and economic analysis. A deeper engineering study of the design and economics of re-processing technologies has since been undertaken by the nuclear group at the University of New Brunswick. An improved fluorination process was developed and modeled using ASPEN process simulation software. This study examines the impact of chosen technology on the spent fuel re-processing costs. (author)

  2. The multi-isotope process monitor: Non-destructive, near-real-time nuclear safeguards monitoring at a reprocessing facility

    Science.gov (United States)

    Orton, Christopher Robert

    The IAEA will require advanced technologies to effectively safeguard nuclear material at envisioned large scale nuclear reprocessing plants. This dissertation describes results from simulations and experiments designed to test the Multi-Isotope Process (MIP) Monitor, a novel safeguards approach for process monitoring in reprocessing plants. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams, nondestructively and in near-real time (NRT). Three different models were used to predict spent nuclear fuel composition, estimate chemical distribution during separation, and simulate spectra from a variety of gamma detectors in product and raffinate streams for processed fuel. This was done for fuel with various irradiation histories and under a variety of plant operating conditions. Experiments were performed to validate the results from the model. Three segments of commercial spent nuclear fuel with variations in burnup and cooling time were dissolved and subjected to a batch PUREX method to separate the uranium and plutonium from fission and activation products. Gamma spectra were recorded by high purity germanium (HPGe) and cadmium zinc telluride (CZT) detectors. Hierarchal Cluster Analysis (HCA) and Principal Component Analysis (PCA) were applied to spectra from both model and experiment to investigate spectral variations as a function of acid concentration, burnup level and cooling time. Partial Least Squares was utilized to extract quantitative information about process variables, such as acid concentration or burnup. The MIP Monitor was found to be sensitive to the induced variations of the process and was capable of extracting quantitative process information from the analyzed spectra.

  3. Transmutation Strategy Using Thorium-Reprocessed Fuel ADS for Future Reactors in Vietnam

    Directory of Open Access Journals (Sweden)

    Thanh Mai Vu

    2013-01-01

    Full Text Available Nuclear power is believed to be a key to the energy security for a developing country like Vietnam where the power demanding increases rapidly every year. Nevertheless, spent nuclear fuel from nuclear power plants is the source of radiotoxic and proliferation risk. A conceptual design of ADS utilizing thorium fuel as a based fuel and reprocessed fuel as a seed for nuclear waste transmutation and energy production is proposed as one of the clean, safe, and economical solutions for the problem. In the design, 96 seed assemblies and 84 blanket assemblies were inserted into the core to make a heterogeneous subcritical core configuration. Introducing thorium fuel into the core offers an effective way to transmute plutonium and minor actinide (MA and gain energy from this process. Transmutation rate as a function of burnup is estimated using MCNPX 2.7.0 code. Results show that by using the seed-blanket designed ADS, at 40 GWd/t burnup, 192 kg of plutonium and 156 kg of MA can be eliminated. Equivalently, 1  ADS can be able to transmute the transuranic (TRU waste from 2  LWRs. 14 units of ADS would be required to eliminate TRUs from the future reactors to be constructed in Vietnam.

  4. Coastal Bend Texas Benthic Habitat Mapping Reprocessed DOQQ Aerial Imagery (NODC Accession 0086051)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 2006 and 2007 the NOAA Coastal Services Center purchased services to reprocess existing digital multi-spectral imagery (ADS-40) and create digital benthic habitat...

  5. Current issues in endoscope reprocessing and infection control during gastrointestinal endoscopy

    Institute of Scientific and Technical Information of China (English)

    Douglas B Nelson; Lawrence F Muscarella

    2006-01-01

    The purpose of this article is to review the evidence regarding transmission of infection during gastrointestinal endoscopy, factors important in endoscope reprocessing and infection control, areas to focus on to improve compliance, and recent developments and advances in the field.

  6. Consolidated fuel-reprocessing program. Progress report, April 1-June 30, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Burch, W D

    1982-09-01

    Highlights of progress accomplished during the quarter ending June 30, 1982 are summarized. Discussion is presented under the headings: Process development; Laboratory R and D; Engineering research; Engineering systems; Integrated equipment test facility operation; Instrument development; and HTGR fuel reprocessing.

  7. Physiological correlates of eye movement desensitization and reprocessing.

    Science.gov (United States)

    Elofsson, Ulf O E; von Schèele, Bo; Theorell, Töres; Söndergaard, Hans Peter

    2008-05-01

    Eye movement desensitization and reprocessing (EMDR) is an established treatment for post-traumatic stress disorder (PTSD). However, its working mechanism remains unclear. This study explored physiological correlates of eye movements during EMDR in relation to current hypotheses; distraction, conditioning, orienting response activation, and REM-like mechanisms. During EMDR therapy, fingertip temperature, heart rate, skin conductance, expiratory carbon dioxide level, and blood pulse oximeter oxygen saturation, were measured in male subjects with PTSD. The ratio between the low and high frequency components of the heart rate power spectrum (LF/HF) were computed as measures of autonomic balance. Respiratory rate was calculated from the carbon dioxide trace. Stimulation shifted the autonomic balance as indicated by decreases in heart rate, skin conductance and LF/HF-ratio, and an increased finger temperature. The breathing frequency and end-tidal carbon dioxide increased; oxygen saturation decreased during eye movements. In conclusion, eye movements during EMDR activate cholinergic and inhibit sympathetic systems. The reactivity has similarities with the pattern during REM-sleep.

  8. Eye movement desensitization and reprocessing (EMDR): a meta-analysis.

    Science.gov (United States)

    Davidson, P R; Parker, K C

    2001-04-01

    Eye movement desensitization and reprocessing (EMDR), a controversial treatment suggested for posttraumatic stress disorder (PTSD) and other conditions, was evaluated in a meta-analysis of 34 studies that examined EMDR with a variety of populations and measures. Process and outcome measures were examined separately. and EMDR showed an effect on both when compared with no treatment and with therapies not using exposure to anxiety-provoking stimuli and in pre post EMDR comparisons. However, no significant effect was found when EMDR was compared with other exposure techniques. No incremental effect of eye movements was noted when EMDR was compared with the same procedure without them. R. J. DeRubeis and P. Crits-Christoph (1998) noted that EMDR is a potentially effective treatment for noncombat PTSD. but studies that examined such patient groups did not give clear support to this. In sum, EMDR appears to be no more effective than other exposure techniques, and evidence suggests that the eye movements integral to the treatment, and to its name, are unnecessary.

  9. Eye movement desensitization and reprocessing for adolescent depression.

    Science.gov (United States)

    Bae, Hwallip; Kim, Daeho; Park, Yong Chon

    2008-03-01

    While cognitive behavior therapy is considered to be the first-line therapy for adolescent depression, there are limited data on whether other psychotherapeutic techniques are also effective in treating adolescents with depression. This report suggests the potential application of eye movement desensitization and reprocessing (EMDR) for treatment of depressive disorder related, not to trauma, but to stressful life events. At present, EMDR has only been empirically validated for only trauma-related disorders such as posttraumatic stress disorder. Two teenagers with major depressive disorder (MDD) underwent three and seven sessions of EMDR aimed at memories of stressful life events. After treatment, their depressive symptoms decreased to the level of full remission, and the therapeutic gains were maintained after two and three months of follow up. The effectiveness of EMDR for depression is explained by the model of adaptive information processing. Given the powerful effects observed within a brief period of time, the authors suggest that further investigation of EMDR for depressive disorders is warranted.

  10. Eye Movement Desensitization and Reprocessing (EMDR as a Neurorehabilitation Method

    Directory of Open Access Journals (Sweden)

    Afsaneh Zarghi

    2013-01-01

    Full Text Available   A variety of nervous system components such as medulla, pons, midbrain, cerebellum, basal ganglia, parietal, frontal and occipital lobes have role in Eye Movement Desensitization and Reprocessing (EMDR processes. The eye movement is done simultaneously for attracting client's attention to an external stimulus while concentrating on a certain internal subject. Eye movement guided by therapist is the most common attention stimulus. The role of eye movement has been documented previously in relation with cognitive processing mechanisms. A series of systemic experiments have shown that the eyes’ spontaneous movement is associated with emotional and cognitive changes and results in decreased excitement, flexibility in attention, memory processing, and enhanced semantic recalling. Eye movement also decreases the memory's image clarity and the accompanying excitement. By using EMDR, we can reach some parts of memory which were inaccessible before and also emotionally intolerable. Various researches emphasize on the effectiveness of EMDR in treating and curing phobias, pains, and dependent personality disorders. Consequently, due to the involvement of multiple neural system components, this palliative method of treatment can also help to rehabilitate the neuro-cognitive system.

  11. Reprocessability of molybdenum and magnesia based inert matrix fuels

    Directory of Open Access Journals (Sweden)

    Ebert Elena L.

    2015-12-01

    Full Text Available This work focuses on the reprocessability of metallic 92Mo and ceramic MgO, which is under investigation for (Pu,MA-oxide (MA = minor actinide fuel within a metallic 92Mo matrix (CERMET and a ceramic MgO matrix (CERCER. Magnesium oxide and molybdenum reference samples have been fabricated by powder metallurgy. The dissolution of the matrices was studied as a function of HNO3 concentration (1-7 mol/L and temperature (25-90°C. The rate of dissolution of magnesium oxide and metallic molybdenum increased with temperature. While the MgO rate was independent of the acid concentration (1-7 mol/L, the rate of dissolution of Mo increased with acid concentration. However, the dissolution of Mo at high temperatures and nitric acid concentrations was accompanied by precipitation of MoO3. The extraction of uranium, americium, and europium in the presence of macro amounts of Mo and Mg was studied by three different extraction agents: tri-n-butylphosphate (TBP, N,Nʹ-dimethyl-N,Nʹ-dioctylhexylethoxymalonamide (DMDOHEMA, and N,N,N’,N’- -tetraoctyldiglycolamide (TODGA. With TBP no extraction of Mo and Mg occurred. Both matrix materials are partly extracted by DMDOHEMA. Magnesium is not extracted by TODGA (D < 0.1, but a weak extraction of Mo is observed at low Mo concentration.

  12. Evaluation and quantification of reprocessing modification in single-use devices in interventional cardiology

    Science.gov (United States)

    Tessarolo, Francesco; Ferrari, Paolo; Silvia, Bortoluzzi; Motta, Antonella; Migliaresi, Claudio; Zennaro, Lucio; Rigo, Adelio; Guarrera, Giovanni Maria; Nollo, Giandomenico

    2004-11-01

    The increasing demand in interventional cardiology urges for reprocessing of single-use-labelled medical devices. To fulfil this aim, accurate and validated regeneration protocols are mandatory to guarantee sterility, functionality and safeness. The reprocessing protocol was realized by decontamination with chloro-donors, cleaning with enzymatic solutions and hydrogen peroxide gas plasma sterilization. Reprocessing effects on ablation and electrophysiology catheters were evaluated by assessing physical-chemical changes on surfaces and bulks, as a function of the reprocessing cycles number. Conventional optical microscopy and environmental scanning electron microscopy (ESEM) underlined the presence of micro-scratches on the polyurethane shaft surface. A clear correlation was found between surface damages and number of reprocessing cycles. Atomic force microscopy (AFM) confirmed the occurrence of physical-chemical etching of the polyurethane shaft caused by the hydrogen peroxide plasma sterilization, with increasing of nano-roughness at increasing number of the reprocessing cycles. UV-Vis spectra performed on the incubation solution of polymeric shaft sample, showed an absorbance increase at about 208 nm. This fact could be attributed to the water elution from the polymer of low molecular weight oligomers. The presence of hydrolysis products of the polymeric shaft after incubation demands both the characterization of the products released in the solution and the chemical characterization of the water exposed surface.

  13. Endoscope reprocessing methods: a prospective study on the impact of human factors and automation.

    Science.gov (United States)

    Ofstead, Cori L; Wetzler, Harry P; Snyder, Alycea K; Horton, Rebecca A

    2010-01-01

    The main cause of endoscopy-associated infections is failure to adhere to reprocessing guidelines. More information about factors impacting compliance is needed to support the development of effective interventions. The purpose of this multisite, observational study was to evaluate reprocessing practices, employee perceptions, and occupational health issues. Data were collected utilizing interviews, surveys, and direct observation. Written reprocessing policies and procedures were in place at all five sites, and employees affirmed the importance of most recommended steps. Nevertheless, observers documented guideline adherence, with only 1.4% of endoscopes reprocessed using manual cleaning methods with automated high-level disinfection versus 75.4% of those reprocessed using an automated endoscope cleaner and reprocessor. The majority reported health problems (i.e., pain, decreased flexibility, numbness, or tingling). Physical discomfort was associated with time spent reprocessing (p = .041). Discomfort diminished after installation of automated endoscope cleaners and reprocessors (p = .001). Enhanced training and accountability, combined with increased automation, may ensure guideline adherence and patient safety while improving employee satisfaction and health.

  14. Spent Fuel Source Term Calculation of Daya Bay Nuclear Power Plant

    Institute of Scientific and Technical Information of China (English)

    XU; Zhi-long; WAN; Hai-xia; LI; Long; WU; Xiao-chun; SHAO; Jing; LIU; Li-li; ZHANG; Jing

    2013-01-01

    The spent fuel of nuclear power plant should be transported to reprocessing plant for reprocessing after reserving for a period of time.Before that,safety analysis and environmental impact assessment should be carried on to the transportation process,which need radioactive source term calculation and analysis.The task of Daya Bay Nuclear Power Plant spent fuel source term calculation includes estimation of

  15. Review of the literature for dry reprocessing oxide, metal, and carbide fuel: The AIROX, RAHYD, and CARBOX pyrochemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Hoyt, R.C.; Rhee, B.W. [Rockwell International Corp., Canoga Park, CA (United States). Energy Systems Group

    1979-09-30

    The state of the art of dry processing oxide, carbide, and metal fuel has been determined through an extensive literature review. Dry processing in one of the most proliferation resistant fuel reprocessing technologies available to date, and is one of the few which can be exported to other countries. Feasibility has been established for oxide, carbide, and metal fuel on a laboratory scale, and large-scale experiments on oxide and carbide fuel have shown viability of the dry processing concept. A complete dry processing cycle has been demonstrated by multicycle processing-refabrication-reirradiation experiments on oxide fuel. Additional experimental work is necessary to: (1) demonstrate the complete fuel cycle for carbide and metal fuel, (2) optimize dry processing conditions, and (3) establish fission product behavior. Dry process waste management is easier than for an aqueous processing facility since wastes are primarily solids and gases. Waste treatment can be accomplished by techniques which have been, or are being, developed for aqueous plants.

  16. Microstructure and Corrosion Behavior of Hf-40 Wt Pct Ti Alloy in Nitric Acid Medium for Reprocessing Applications

    Science.gov (United States)

    Jayaraj, J.; Ravi, K. R.; Mallika, C.; Kamachi Mudali, U.

    2016-09-01

    The Hf-40 wt pct Ti (Hf-Ti) alloy was developed for neutron poison application in the spent nuclear fuel reprocessing plant. The furnace-cooled Hf-Ti sample exhibited the microstructure comprising equiaxed-α, lamellar-α, and feathery-α. The water-quenched Hf-Ti sample confirmed the presence of lath and internally twinned martensite. In comparison to the furnace-cooled sample, low corrosion current density and passivation current density values obtained for the water-quenched Hf-Ti in 6 M HNO3 at 298 K (25 °C) indicated better passivation ability. The martensitic structure exhibited high hardness (660 HV) and negligible corrosion rate in 6 M nitric acid at 298 K (25 °C). X-ray photoelectron spectroscopic (XPS) analysis confirmed that passivation behavior of this alloy was due to the protective passive film composed of TiO2 and HfO2.

  17. Overview of reductants utilized in nuclear fuel reprocessing/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Paviet-Hartmann; Catherine Riddle; Keri Campbell; Edward Mausolf

    2013-10-01

    promises as a replacement for AHA. FHA undergoes hydrolysis to formic acid which is volatile, thus allowing the recycling of nitric acid. Unfortunately, FHA powder was not stable in the experiments we ran in our laboratory. In addition, AHA and FHA also decompose to hydroxylamine which may undergo an autocatalytic reaction. Other reductants are available and could be extremely useful for actinides separation. The review presents the current plutonium reductants used in used nuclear fuel reprocessing and will introduce innovative and novel reductants that could become reducers for future research on UNF separation.

  18. ATP measurement as method to monitor the quality of reprocessing flexible endoscopes

    Directory of Open Access Journals (Sweden)

    Hansen, Dorothea

    2004-04-01

    Full Text Available Insufficient performance of cleaning and disinfection of flexible endoscopes can pose an infection risk to patients. Actually quality of reprocessing is checked by performing microbiological cultures. Unfortunately, their results are not available on the same day so that more rapid methods are desirable. We compared the ATP (adenosine triphosphate bioluminescence for hygiene checking of the reprocessing procedures of 108 flexible endoscopes with routine microbiological culture technics. Sensitivity and specifity of ATP bioluminescence was calculated. 28 endoscopes showed bacterial growth of at least one sample. Depending on the applied threshold of bioluminescence between 67 and 28 endoscopes were positive. Sensitivity varied between 0.46 and 0.75 and specifity between 0.43 and 0.81. ATP bioluminescence does not replace routine microbiologic methods but it can indicate the need of immediate check of reprocessing.

  19. Remote maintenance lessons learned'' on prototypical reprocessing equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kring, C.T.; Schrock, S.L.

    1990-01-01

    Hardware representative of essentially every major equipment item necessary for reprocessing breeder reactor nuclear fuel has been installed and tested for remote maintainability. This testing took place in a cold mock-up of a remotely maintained hot cell operated by the Consolidated Fuel Reprocessing Program (CFRP) within the Fuel Recycle Division at Oak Ridge National Laboratory (ORNL). The reprocessing equipment tested included a Disassembly System, a Shear System, a Dissolver System, an Automated Sampler System, removable Equipment Racks on which various chemical process equipment items were mounted, and an advanced servomanipulator (ASM). These equipment items were disassembled and reassembled remotely by using the remote handling systems that are available within the cold mock-up area. This paper summarizes the lessons learned'' as a result of the numerous maintenance activities associated with each of these equipment items. 4 refs., 3 figs., 1 tab.

  20. Monitoring of endoscope reprocessing with an adenosine triphosphate (ATP) bioluminescence method.

    Science.gov (United States)

    Parohl, Nina; Stiefenhöfer, Doris; Heiligtag, Sabine; Reuter, Henning; Dopadlik, Dana; Mosel, Frank; Gerken, Guido; Dechêne, Alexander; Heintschel von Heinegg, Evelyn; Jochum, Christoph; Buer, Jan; Popp, Walter

    2017-01-01

    Background: The arising challenges over endoscope reprocessing quality proposes to look for possibilities to measure and control the process of endoscope reprocessing. Aim: The goal of this study was to evaluate the feasibility of monitoring endoscope reprocessing with an adenosine triphosphate (ATP) based bioluminescence system. Methods: 60 samples of eight gastroscopes have been assessed from routine clinical use in a major university hospital in Germany. Endoscopes have been assessed with an ATP system and microbial cultures at different timepoints during the reprocessing. Findings: After the bedside flush the mean ATP level in relative light units (RLU) was 19,437 RLU, after the manual cleaning 667 RLU and after the automated endoscope reprocessor (AER) 227 RLU. After the manual cleaning the mean total viable count (TVC) per endoscope was 15.3 CFU/10 ml, and after the AER 5.7 CFU/10 ml. Our results show that there are reprocessing cycles which are not able to clean a patient used endoscope. Conclusion: Our data suggest that monitoring of flexible endoscope with ATP can identify a number of different influence factors, like the endoscope condition and the endoscopic procedure, or especially the quality of the bedside flush and manual cleaning before the AER. More process control is one option to identify and improve influence factors to finally increase the overall reprocessing quality, best of all by different methods. ATP measurement seems to be a valid technique that allows an immediate repeat of the manual cleaning if the ATP results after manual cleaning exceed the established cutoff of 200 RLU.

  1. Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step

    OpenAIRE

    Rodrigues Davide; Durán-Klie Gabriela; Delpech Sylvie

    2015-01-01

    The nuclear fuel reprocessing is a prerequisite for nuclear energy to be a clean and sustainable energy. In the case of the molten salt reactor containing a liquid fuel, pyrometallurgical way is an obvious way. The method for treatment of the liquid fuel is divided into two parts. In-situ injection of helium gas into the fuel leads to extract the gaseous fission products and a part of the noble metals. The second part of the reprocessing is performed by ‘batch’. It aims to recover the fissile...

  2. Methods of Gas Phase Capture of Iodine from Fuel Reprocessing Off-Gas: A Literature Survey

    Energy Technology Data Exchange (ETDEWEB)

    Daryl Haefner

    2007-02-01

    A literature survey was conducted to collect information and summarize the methods available to capture iodine from fuel reprocessing off-gases. Techniques were categorized as either wet scrubbing or solid adsorbent methods, and each method was generally described as it might be used under reprocessing conditions. Decontamination factors are quoted only to give a rough indication of the effectiveness of the method. No attempt is made to identify a preferred capture method at this time, although activities are proposed that would provide a consistent baseline that would aid in evaluating technologies.

  3. Economics and resources analysis of the potential use of reprocessing options by the current Spanish nuclear reactor park

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez-Velarde, F.; Merino Rodriguez, I.; Gonzalez-Romero, E.

    2014-07-01

    Reprocessing of irradiated nuclear fuel serves multiple purposes, from Pu separation and recovery for MOX fuel fabrication to reduction of high level waste volume, and is nowadays being implemented in several countries like France, Japan, Russia or United Kingdom. This work is aimed at exploring the possibility (in resources and economic terms) of implementing reprocessing for MOX fabrication in Spain. (Author)

  4. A Review of Eye Movement Desensitization and Reprocessing (EMDR): Research Findings and Implications for Counsellors.

    Science.gov (United States)

    MacCluskie, Kathryn C.

    1998-01-01

    States that within the last six years a new therapeutic technique for the treatment of posttraumatic stress disorder, Eye Movement Desensitization and Reprocessing (EMDR), has emerged. Examines the strengths and weaknesses of published studies concerning EMDR, describes the nature of the debate about the efficacy of EMDR, and reviews implications…

  5. Eye Movement Desensitization and Reprocessing (EMDR) Treatment for Psychologically Traumatized Individuals.

    Science.gov (United States)

    Wilson, Sandra A.; And Others

    1995-01-01

    Studies the effects of 3 90-minute Eye Movement Desensitization and Reprocessing (EMDR) treatment sessions on traumatic memories of 80 participants. Participants receiving EMDR showed decreases in complaints and anxiety, and increases in positive cognition. Participants in the delayed-treatment condition showed no improvement in any measures in…

  6. Radiation Protection Report of the First Hot Test at China Reprocessing and Radiochemistry Laboratory

    Institute of Scientific and Technical Information of China (English)

    BAI; Yang; LIU; Ning; JIAO; Xiao-yan; XU; Xin; MA; Hao-ran; WANG; Xiang-li

    2015-01-01

    The first hot test has been completed at China Reprocessing and Radiochemistry Laboratory in September to December 2015.In order to ensure the safety of personal,facility and environment,security group wrote safety management regulation,drew up the specialized radiation monitoring plan and organized emergency exercise.

  7. Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour

    Directory of Open Access Journals (Sweden)

    Marco Morreale

    2015-11-01

    Full Text Available The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of reprocessing on the matrix properties, wood flour loading effects on virgin and reprocessed biopolymer, and wood flour effects on material reprocessability. Tensile, Dynamic-mechanical thermal (DMTA, differential scanning calorimetry (DSC and creep tests were performed, pointing out that wood flour leads to an improvement of rigidity and creep resistance in comparison to the pristine polymer, without compromising other properties such as the tensile strength. The biopolymer also showed a good resistance to multiple reprocessing; the latter even allowed for improving some properties of the obtained green composites.

  8. Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour.

    Science.gov (United States)

    Morreale, Marco; Liga, Antonio; Mistretta, Maria Chiara; Ascione, Laura; Mantia, Francesco Paolo La

    2015-11-11

    The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources) as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of reprocessing on the matrix properties, wood flour loading effects on virgin and reprocessed biopolymer, and wood flour effects on material reprocessability. Tensile, Dynamic-mechanical thermal (DMTA), differential scanning calorimetry (DSC) and creep tests were performed, pointing out that wood flour leads to an improvement of rigidity and creep resistance in comparison to the pristine polymer, without compromising other properties such as the tensile strength. The biopolymer also showed a good resistance to multiple reprocessing; the latter even allowed for improving some properties of the obtained green composites.

  9. Reprocessing the Southern Hemisphere ADditional OZonesondes (SHADOZ) Database for Long-Term Trend Analyses

    Science.gov (United States)

    Witte, J. C.; Thompson, A. M.; Coetzee, G.; Fujiwara, M.; Johnson, B. J.; Sterling, C. W.; Cullis, P.; Ashburn, C. E.; Jordan, A. F.

    2015-12-01

    SHADOZ is a large archive of tropical balloon-bone ozonesonde data at NASA/Goddard Space Flight Center with data from 14 tropical and subtropical stations provided by collaborators in Europe, Asia, Latin America and Africa . The SHADOZ time series began in 1998, using electrochemical concentration cell (ECC) ozonesondes. Like many long-term sounding stations, SHADOZ is characterized by variations in operating procedures, launch protocols, and data processing such that biases within a data record and among sites appear. In addition, over time, the radiosonde and ozonesonde instruments and data processing protocols have changed, adding to the measurement uncertainties at individual stations and limiting the reliability of ozone profile trends and continuous satellite validation. Currently, the ozonesonde community is engaged in reprocessing ECC data, with an emphasis on homogenization of the records to compensate for the variations in instrumentation and technique. The goals are to improve the information and integrity of each measurement record and to support calculation of more reliable trends. We illustrate the reprocessing activity of SHADOZ with selected stations. We will (1) show reprocessing steps based on the recent WMO report that provides post-processing guidelines for ozonesondes; (2) characterize uncertainties in various parts of the ECC conditioning process; and (3) compare original and reprocessed data to co-located ground and satellite measurements of column ozone.

  10. 77 FR 38789 - Notice of Availability of Draft Waste Incidental to Reprocessing Evaluation for the Concentrator...

    Science.gov (United States)

    2012-06-29

    ... vitrifying waste from reprocessing of spent nuclear fuel and certain treatment material at the West Valley... canisters where the mixture hardened into a solid glass waste form. DOE operated the vitrification system... of Chapter IV of DOE Manual 435.1-1, provided the waste will be incorporated in a solid physical...

  11. Effects of reprocessing on chemical and morphological properties of guide wires used in angioplasty

    Directory of Open Access Journals (Sweden)

    Rogério Valentim Gelamo

    2013-09-01

    Full Text Available OBJECTIVE: To investigate the influence of the reprocessing technique of enzymatic bath with ultrasonic cleaning and ethylene oxide sterilization on the chemical properties and morphological structure of polymeric coatings of guide wire for regular guiding catheter. METHODS: These techniques simulated the routine of guide wire reprocessing in many hemodynamic services in Brazil and other countries. Samples from three different manufacturers were verified by scanning electron microscopy and X-ray photoelectron spectroscopy. RESULTS: A single or double sterilization of the catheters with ethylene oxide was not associated with morphological or chemical changes. However, scanning electron microscopy images showed that the washing method was associated with rough morphological changes, including superficial holes and bubbles, in addition to chemical changes of external atomic layers of polymeric coating surfaces, as detected by the X-ray photoelectron spectroscopy method, which is compatible with extended chemical changes on catheter surfaces. CONCLUSION: The reprocessing of the catheters with ethylene oxide was not associated with morphological or chemical changes, and it seemed appropriate to maintain guide wire coating integrity. However, the method combining chemical cleaning with mechanical vibration resulted in rough anatomical and chemical surface deterioration, suggesting that this reprocessing method should be discouraged.

  12. Reprocessing of spent nuclear fuels. Status and trends; Upparbetning av anvaent kaernbraensle. Laege och trender

    Energy Technology Data Exchange (ETDEWEB)

    Hultgren, Aa.

    1993-01-01

    The report gives a short review of the status for industrial reprocessing and recycling of Uranium/Plutonium. The following countries are covered: Belgium, France, Germany, Great Britain, India, Japan, Russia, USA. Different fuel cycle strategies are accounted for, and new developments outlined. 116 refs, 27 figs, 12 tabs.

  13. The Eye Movement Desensitization and Reprocessing Procedure Prevents Defensive Processing in Health Persuasion

    NARCIS (Netherlands)

    Dijkstra, Arie; van Asten, Regine

    2014-01-01

    In the present study, the method of eye movement desensitization and reprocessing (EMDR) is studied to understand and prevent defensive reactions with regard to a negatively framed message advocating fruit and vegetable consumption. EMDR has been shown to tax the working memory. Participants from a

  14. A Comparison of "at-launch" V03 GPM Data Products and V04 Reprocessed Products

    Science.gov (United States)

    Stocker, Erich Franz; Kwiatkowksi, John; Ji, Yimin; Kelley, Owen; Stout, John; Woltz, Lawrence

    2016-04-01

    The first major reprocessing of GPM mission data is scheduled for 1 March 2016. This is an important first-step in the creation of a consistent mission data suite.It will be the first set of data in which the GPM constellation radiometers are intercalibrated using GPM GMI. In addition, the GPROF profile database will be substantially observational and based on the GPM combined data product. The GPM V03 "at-launch" 1C algorithms intercalibrated the constellation radiometers using TRMM TMI as the satellite reference standard. The GPROF profile database used for retrievals was based on TRMM, AMSRE, RadarSat and NMQ quality-controlled ground radar data in addition to model input. The V04 GPROF reprocessing will depend upon a profile database that is constructed using V04 GPM combined (DPR/GMI) observational data. This paper will provide comparison analysis of at launch V03 vs reprocessed V04. It will present global means comparing the V03 and V04 retrievals for both GPROF and the DPR radar. It will also look at the difference of the means separately for Land and Ocean. In addition it will look at specific instances of differences using the GPM gridded text products. In conclusion it will present the plans for a V05 reprocessing which is scheduled to take place in March of 2017.

  15. Advances in Endoscope Reprocessing Technology and Its Impact on Pathogen Transmission.

    Science.gov (United States)

    Shellnutt, Cathleen

    Pathogen transmissions via flexible endoscopes have been documented in the literature and have been historically related to human error or omission of steps in the reprocessing cycle. The 2008 Centers for Disease Control and Prevention report challenged manufacturers of automated endoscope reprocessors to improve and advance technology to automate more of the reprocessing steps. A review and synthesis of the literature following the 2008 Centers for Disease Control and Prevention report was performed to evaluate whether advances in reprocessing technology have occurred and whether these have had an impact on pathogen transmission via flexible endoscopes. The Iowa Model of Evidence-Based Practice to Promote Quality Care was used to guide the project. The literature search regarding pathogen transmission related to flexible endoscopes yielded 10 documents citing infections from 2008 to 2015. A total of 353 patients were identified as having been infected with a contaminated gastroscope, bronchoscope, or duodenoscope. An evaluation of reprocessing technology identified 3 automated endoscope reprocessors with enhanced capabilities and flushing devices intended to automate portions of the manual cleaning step.

  16. Evaluation of Methods for Decladding LWR Fuel for a Pyroprocessing-Based Reprocessing Plant

    Science.gov (United States)

    1992-10-01

    removed prior to any other operation that has the potential to contaminate the plenum structure. The compression springs, typically made of Inconel - 718 ...44 A.1.4 Dissolution in Hydrofluoric Acid .............................. 46 A.1.5 Nonaqueous Dissolution ...46 A.1.6 Alcholic HCl Solutions ..................................... 48 A.1.7 Direct Dissolution in Molten Lead or Zinc Chloride

  17. Technology, safety, and costs of decommissioning a reference nuclear fuel reprocessing plant. [Appendices only

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.; Jenkins, C.E.; Rhoads, R.E.

    1977-09-01

    Volume 2 comprises six appendices on: facility description; residual radioactivity inventory estimates; description and contamination levels of reference site; derivation of residual contamination levels; decommissioning mode detail; and decommissioning safety assessment details.

  18. Development of refining technology of Xe recovered from reprocessing plant off gas for commercial use

    Energy Technology Data Exchange (ETDEWEB)

    Tomiku, Yasushi [Air Water Inc., Osaka (Japan); Okimoto, Katsunori; Shoji, Hisashi; Hayashi, Sin-ichiro [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai Reprocessing Center, Tokai, Ibaraki (Japan)

    2002-06-01

    The present study is aiming to develop refining system of recovered Xe at Krypton Recovery Facility (KRF) by pressure swing adsorption with purge system for commercial use, such as to lighting and ion engine. Refined Xe with low radioactive Kr was prepared through three series of adsorption column packing synthetic Ca-X zeolite. And the computer simulation by molecular mechanics was practiced to obtain purification mechanism for Xe/Kr mixed gas. The simulation was fitted with the practical adsorption test. So the effects of pressure and cation were studied about adsorption. (author)

  19. Metal-organic frameworks for removal of Xe and Kr from nuclear fuel reprocessing plants.

    Science.gov (United States)

    Liu, Jian; Thallapally, Praveen K; Strachan, Denis

    2012-08-01

    Removal of xenon (Xe) and krypton (Kr) from process off-gases containing 400 ppm Xe, 40 ppm Kr, 78% N(2), 21% O(2), 0.9% Ar, 0.03% CO(2), and so forth using adsorption was demonstrated for the first time. Two well-known metal-organic frameworks (MOFs), HKUST-1 and Ni/DOBDC, which both have unsaturated metal centers but different pore morphologies, were selected as novel adsorbents. Results of an activated carbon were also included for comparison. The Ni/DOBDC has higher Xe/Kr selectivities than those of the activated carbon and the HKUST-1. In addition, results show that the Ni/DOBDC and HKUST-1 can adsorb substantial amounts of Xe and Kr even when they are mixed in air. Moreover, the Ni/DOBDC can successfully separate 400 ppm Xe from 40 ppm Kr and air containing O(2), N(2), and CO(2) with a Xe/Ke selectivity of 7.3 as indicated by our breakthrough results. This shows a promising future for MOFs in radioactive nuclide separations from spent fuels.

  20. Environmental survey of the reprocessing and waste management portions of the LWR fuel cycle: a task force report

    Energy Technology Data Exchange (ETDEWEB)

    Bishop, W.P.; Miraglia, F.J. Jr. (eds.)

    1976-10-01

    This Supplement deals with the reprocessing and waste management portions of the nuclear fuel cycle for uranium-fueled reactors. The scope of the report is limited to the illumination of fuel reprocessing and waste management activities, and examination of the environmental impacts caused by these activities on a per-reactor basis. The approach is to select one realistic reprocessing and waste management system and to treat it in enough depth to illuminate the issues involved, the technology available, and the relationships of these to the nuclear fuel cycle in general and its environmental impacts.

  1. Eye movement desensitization and reprocessing (EMDR) in the treatment of war veterans.

    Science.gov (United States)

    Silver, Steven M; Rogers, Susan; Russell, Mark

    2008-08-01

    Recent practice guidelines and meta-analyses have designated eye movement desensitization and reprocessing (EMDR) as a first-line treatment for trauma. Eye movement desensitization and reprocessing is an eight-phase therapeutic approach guided by an information-processing model that addresses the combat veteran's critical incidents, current triggers, and behaviors likely to prove useful in his or her future. Two case examples of combat veterans illustrate the ability of EMDR to achieve symptom reduction in a variety of clinical domains (e.g., anxiety, depression, anger, physical pain) simultaneously without requiring the patient to carry out homework assignments or discuss the details of the event. The treatment of phantom limb pain and other somatic presentations is also reviewed. The ability of EMDR to achieve positive effects without homework indicates that it can be effectively employed on consecutive days, making it especially useful during combat situations.

  2. High temperature gas-cooled reactor (HTGR) graphite pebble fuel: Review of technologies for reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Mcwilliams, A. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-08

    This report reviews literature on reprocessing high temperature gas-cooled reactor graphite fuel components. A basic review of the various fuel components used in the pebble bed type reactors is provided along with a survey of synthesis methods for the fabrication of the fuel components. Several disposal options are considered for the graphite pebble fuel elements including the storage of intact pebbles, volume reduction by separating the graphite from fuel kernels, and complete processing of the pebbles for waste storage. Existing methods for graphite removal are presented and generally consist of mechanical separation techniques such as crushing and grinding chemical techniques through the use of acid digestion and oxidation. Potential methods for reprocessing the graphite pebbles include improvements to existing methods and novel technologies that have not previously been investigated for nuclear graphite waste applications. The best overall method will be dependent on the desired final waste form and needs to factor in the technical efficiency, political concerns, cost, and implementation.

  3. Effect of Reprocessing and Accelerated Weathering on Impact-Modified Recycled Blend

    Science.gov (United States)

    Ramesh, V.; Mohanty, Smita; Biswal, Manoranjan; Nayak, Sanjay K.

    2015-12-01

    Recovery of recycled polycarbonate, acrylonitrile butadiene styrene, high-impact polystyrene, and its blends from waste electrical and electronic equipment plastics products properties were enhanced by the addition of virgin polycarbonate and impact modifier. The optimized blend formulation was processed through five cycles, at processing temperature, 220-240 °C and accelerated weathering up to 700 h. Moreover, the effect of reprocessing and accelerated weathering in the physical properties of the modified blends was investigated by mechanical, thermal, rheological, and morphological studies. The results show that in each reprocessing cycle, the tensile strength and impact strength decreased significantly and the similar behavior has been observed from accelerated weathering. Subsequently, the viscosity decreases and this decrease becomes the effect of thermal and photo-oxidative degradation. This can be correlated with FTIR analysis.

  4. Cyclone furnace for intensive reprocessing or burning of dispersed mineral raw material

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, E.; Jankowski, S.; Kurdowski, W.; Parda, A.; Zamojdo, R.

    1982-10-30

    In order to reduce emission of solid (or liquid) microparticles of reprocessed or burned dispersed mineral raw material, a separation furnace is proposed which has the appearance of a horizontally lying drum of a steam boiler. The raw material to be reprocessed is fed into the furnace chamber through two cylindrical pipelines arranged in its upper part in the opposite ends, and in the middle between them in the upper part there is a gas line for removal of exhaust gases arranged at a 55/sup 0/ angle to the horizontal. In the lower part there is a device for discharging the accumulated solid microparticles or fluid arranged at a 30/sup 0/ angle to the base plane.

  5. Reprocessing of Ices in Turbulent Protoplanetary Disks: Carbon and Nitrogen Chemistry

    CERN Document Server

    Furuya, Kenji

    2014-01-01

    We study the influence of the turbulent transport on ice chemistry in protoplanetary disks, focusing on carbon and nitrogen bearing molecules. Chemical rate equations are solved with the diffusion term, mimicking the turbulent mixing in the vertical direction. Turbulence can bring ice-coated dust grains from the midplane to the warm irradiated disk surface, and the ice mantles are reprocessed by photoreactions, thermal desorption, and surface reactions. The upward transport decreases the abundance of methanol and ammonia ices at r < 30 AU, because warm dust temperature prohibits their reformation on grain surfaces. This reprocessing could explain the smaller abundances of carbon and nitrogen bearing molecules in cometary coma than those in low-mass protostellar envelopes. We also show the effect of mixing on the synthesis of complex organic molecules (COMs) are two ways: (1) transport of ices from the midplane to the disk surface and (2) transport of atomic hydrogen from the surface to the midplane. The fo...

  6. Desensitization of triggers and urge reprocessing for pathological gambling: a case series.

    Science.gov (United States)

    Bae, Hwallip; Han, Changwoo; Kim, Daeho

    2015-03-01

    This case series introduces the desensitization of triggers and urge reprocessing (DeTUR), as a promising adjunctive therapy in addition to comprehensive treatment package for pathological gambling. This addiction protocol of eye movement desensitization and reprocessing was delivered to four male inpatients admitted to a 10-week inpatient program for pathological gambling. The therapist gave three 60-min weekly sessions of the DeTUR using bilateral stimulation (horizontal eye movements or alternative tactile stimuli) focusing on the hierarchy of triggering situations and the urge to initiate gambling behaviors. After treatment, self-reported gambling symptoms, depression, anxiety, and impulsiveness were all improved, and all the participants reported satisfaction with the therapy. They were followed up for 6 months and all maintained their abstinence from gambling and their symptomatic improvements. Given the efficiency (i.e., brevity and efficacy) of the treatment, a controlled study to confirm the effects of the DeTUR on pathological gambling would be justified.

  7. Available reprocessing and recycling services for research reactor spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Tozser, Sandor; Marshall, Frances M.; Adelfang, Pablo; Bradley, Edward [International Atomic Energy Agency, Vienna (Austria); Budu, Madalina Elena [SOSNY Research and Development Company, Moscow (Russian Federation); Chiguer, Mustapha [AREVA, Paris La Defense (France)

    2016-03-15

    International activities in the back end of the research reactor (RR) fuel cycle have so far been dominated by the programmes of acceptance of highly-enriched uranium (HEU) spent nuclear fuel (SNF) by the country where it was originally enriched. In the future inventories of LEU SNF will continue to be created and the back end solution of RR SNF remains a critical issue. The IAEA, based on the experience gained during the decade of international cooperation in supporting the objectives of the HEU take-back programmes, drew up a report presenting available reprocessing and recycling services for RR SNF. This paper gives an overview of the report, which will address all aspects of reprocessing and recycling services for RR SNF.

  8. Experimental research subject and renovation of chemical processing facility (CPF) for advanced fast reactor fuel reprocessing technology development

    Energy Technology Data Exchange (ETDEWEB)

    Koyama, Tomozo; Shinozaki, Tadahiro; Nomura, Kazunori; Koma, Yoshikazu; Miyachi, Shigehiko; Ichige, Yoshiaki; Kobayashi, Tsuguyuki; Nemoto, Shin-ichi [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan)

    2002-12-01

    In order to enhance economical efficiency, environmental impact and nuclear nonproliferation resistance, the Advanced Reprocessing Technology, such as simplification and optimization of process, and applicability evaluation of the innovative technology that was not adopted up to now, has been developed for the reprocessing of the irradiated fuel taken out from a fast reactor. Renovation of the hot cell interior equipments, establishment and updating of glove boxes, installation of various analytical equipments, etc. in the Chemical Processing Facility (CPF) was done to utilize the CPF more positivity which is the center of the experimental field, where actual fuel can be used, for research and development towards establishment of the Advanced Reprocessing Technology development. The hot trials using the irradiated fuel pins of the experimental fast reactor 'JOYO' for studies on improved aqueous reprocessing technology, MA separation technology, dry process technology, etc. are scheduled to be carried out with these new equipments. (author)

  9. Treatment of dysfunctionally stored experiences with the method Eye Movement Desensitization and Reprocessing – EMDR

    OpenAIRE

    Robert Cvetek

    2002-01-01

    In this paper a new therapeutic method called EMDR (Eye Movement Desensitization and Reprocessing) is described. The method was formed mainly for treatment of posttraumatic stress disorder, but there are also some reports about success with other mental disorders. The theoretical base of EMDR and especially the accelerated information processing model, the concept of memory networks and the explanations of effects of eye movements are presented. The process of EMDR is also described.

  10. Treatment of dysfunctionally stored experiences with the method Eye Movement Desensitization and Reprocessing – EMDR

    Directory of Open Access Journals (Sweden)

    Robert Cvetek

    2002-09-01

    Full Text Available In this paper a new therapeutic method called EMDR (Eye Movement Desensitization and Reprocessing is described. The method was formed mainly for treatment of posttraumatic stress disorder, but there are also some reports about success with other mental disorders. The theoretical base of EMDR and especially the accelerated information processing model, the concept of memory networks and the explanations of effects of eye movements are presented. The process of EMDR is also described.

  11. Følelser i bevægelse. Om læreprocesser i musikterapeutens uddannelse

    DEFF Research Database (Denmark)

    Lindvang, Charlotte; Bonde, Lars Ole

    2012-01-01

    Artiklen sætter fokus på forholdet mellem musik og følelser, som dette indgår i musikterapistuderendes personlige og professionelle læreprocesser. Der tages teoretisk afsæt i Antonio Damasios og Daniel Sterns kropsorienterede teorier om emotioner og følelser, med særligt fokus på baggrundsfølelser...

  12. Quality Assessment and Collection V1.1 Reprocessing of the Suomi NPP VIIRS LAND Records

    Science.gov (United States)

    Devadiga, S.; Davidson, C. C.; Sarkar, S.; Ye, G.; Hattori, M.; Praderas, C.; Kalb, V.; Nguyen, A.; Hamilton, C.; Kuyper, J.; Roman, M. O.; Mauoka, E.

    2014-12-01

    The Land Product Evaluation and Algorithm Testing Element (PEATE) is an important element of the Suomi National Polar-orbiting Partnership (SNPP) at NASA's Goddard Space Flight Center. The primary goals of NASA's Land PEATE are to assess the quality of the Visible Infrared Imaging Radiometer Suite (VIIRS) Land operational products made by the Interface Data Processing System (IDPS), and to recommend improvements to the operational algorithms to meet NASA's Land science needs. The Land PEATE uses a version of the MODIS Adaptive Processing System (MODAPS), NPPDAPS, which has been modified to run the IDPS operational algorithms, as well as software provided by the NASA SNPP Land Science Team. Since the early pre-launch period (c. 2009) the Land PEATE has used the MODIS Land Data Operational Product Evaluation (LDOPE) team for evaluation of the data records generated by NPPDAPS.In June 2014, Land PEATE completed Collection V1.1 reprocessing of the SNPP VIIRS Land products from the beginning (Jan 19, 2012) of the SNPP mission to current day using the best of the IDPS operational and NASA Land science team provided algorithms. The processing used the refined LUTs provided by the NASA VIIRS Calibration Support Team (VCST) for the L1B Sensor Data Records (SDR), including LUTs for calibration and stray light correction of the VIIRS Day/Night Band. In addition to generating the operational SDRs, Intermediate Products (IPs), and Environmental Data Records (EDRs) this reprocessing also produced Diagnostics Data Records, MODIS heritage L3 gridded products using the VIIRS observations. This paper describes approaches used to assess the quality of the products from operational processing and reprocessing of VIIRS records at Land PEATE. The paper also presents results from inter-comparison of records from this reprocessing with the MODIS heritage products. Our analysis verified that MODIS quality data records can be produced using the VIIRS observations, however with additional

  13. Conservatism in effective dose calculations for accident events involving fuel reprocessing waste tanks.

    Science.gov (United States)

    Bevelacqua, J J

    2011-07-01

    Conservatism in the calculation of the effective dose following an airborne release from an accident involving a fuel reprocessing waste tank is examined. Within the regulatory constraints at the Hanford Site, deterministic effective dose calculations are conservative by at least an order of magnitude. Deterministic calculations should be used with caution in reaching decisions associated with required safety systems and mitigation philosophy related to the accidental release of airborne radioactive material to the environment.

  14. THE ECONOMICS OF REPROCESSING vs DIRECT DISPOSAL OF SPENT NUCLEAR FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Bunn; Steve Fetter; John P. Holdren; Bob van der Zwaan

    2003-07-01

    This report assesses the economics of reprocessing versus direct disposal of spent nuclear fuel. The breakeven uranium price at which reprocessing spent nuclear fuel from existing light-water reactors (LWRs) and recycling the resulting plutonium and uranium in LWRs would become economic is assessed, using central estimates of the costs of different elements of the nuclear fuel cycle (and other fuel cycle input parameters), for a wide range of range of potential reprocessing prices. Sensitivity analysis is performed, showing that the conclusions reached are robust across a wide range of input parameters. The contribution of direct disposal or reprocessing and recycling to electricity cost is also assessed. The choice of particular central estimates and ranges for the input parameters of the fuel cycle model is justified through a review of the relevant literature. The impact of different fuel cycle approaches on the volume needed for geologic repositories is briefly discussed, as are the issues surrounding the possibility of performing separations and transmutation on spent nuclear fuel to reduce the need for additional repositories. A similar analysis is then performed of the breakeven uranium price at which deploying fast neutron breeder reactors would become competitive compared with a once-through fuel cycle in LWRs, for a range of possible differences in capital cost between LWRs and fast neutron reactors. Sensitivity analysis is again provided, as are an analysis of the contribution to electricity cost, and a justification of the choices of central estimates and ranges for the input parameters. The equations used in the economic model are derived and explained in an appendix. Another appendix assesses the quantities of uranium likely to be recoverable worldwide in the future at a range of different possible future prices.

  15. Activity Concentration Monitoring for Alpha Radioactive Aerosol in CRARL after Reprocessing Experiments

    Institute of Scientific and Technical Information of China (English)

    WANG; Xiang-li; LIU; Ning; WANG; Xiao-rong; BAI; Yang; JIAO; Xiao-yan; XU; Xin; MA; Hao-ran

    2015-01-01

    The activity concentration for alpha radioactive aerosol in CRARL after reprocessing experiments was analyzed.Through the decay method of activity concentration monitoring,the processed result shows the background is 3.05×10-3 s-1,σ(0)=2.25×10-3,LC=2.33×10-3 Bq/m3,LD=4.66×10-3 Bq/m3.The result indicated

  16. Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step

    Directory of Open Access Journals (Sweden)

    Rodrigues Davide

    2015-12-01

    Full Text Available The nuclear fuel reprocessing is a prerequisite for nuclear energy to be a clean and sustainable energy. In the case of the molten salt reactor containing a liquid fuel, pyrometallurgical way is an obvious way. The method for treatment of the liquid fuel is divided into two parts. In-situ injection of helium gas into the fuel leads to extract the gaseous fission products and a part of the noble metals. The second part of the reprocessing is performed by ‘batch’. It aims to recover the fissile material and to separate the minor actinides from fission products. The reprocessing involves several chemical steps based on redox and acido-basic properties of the various elements contained in the fuel salt. One challenge is to perform a selective extraction of actinides and lanthanides in spent liquid fuel. Extraction of actinides and lanthanides are successively performed by a reductive extraction in liquid bismuth pool containing metallic lithium as a reductive reagent. The objective of this paper is to give a description of the several steps of the reprocessing retained for the molten salt fast reactor (MSFR concept and to present the initial results obtained for the reductive extraction experiments realized in static conditions by contacting LiF-ThF4-UF4-NdF3 with a lab-made Bi-Li pool and for which extraction efficiencies of 0.7% for neodymium and 14.0% for uranium were measured. It was concluded that in static conditions, the extraction is governed by a kinetic limitation and not by the thermodynamic equilibrium.

  17. Reprocessing of dental instruments in washer-disinfectors: does a representative test soil exist in dentistry?

    OpenAIRE

    Franz, A.; Bristela, M.; Stauffer, F

    2012-01-01

    Background: Reprocessing of medical devices, being classified as semi-critical B is recommended to be performed in a washer-disinfector. In order to estimate, whether the expected contaminants of the various medical disciplines can be effectively removed by this washer-disinfector, different so called "test soils" have been proposed to be tested as a marker of cleaning efficacy of the disinfector. Todays described test soils are optimised for the testing of contaminations occurring in surgic...

  18. Effect of a change management program in a medical device reprocessing department: a mixed methods study.

    Science.gov (United States)

    Chadwick, Judy; Knapp, Mike; Sinclair, Douglas; Arshoff, Larry

    2014-01-01

    Faced with a variety of challenges in relation to performance, quality, staff engagement and morale in the Medical Device Reprocessing Department, managers at St. Michael's Hospital developed and implemented several innovative approaches including combining staff training and performance metrics. The results of these initiatives included a substantial reduction in the departmental budget along with higher productivity, output and quality; better staff morale; an improved relationship between management and the union; and a stronger partnership between the department and its institutional customers.

  19. An Integrative Model for the Neural Mechanism of Eye Movement Desensitization and Reprocessing (EMDR)

    OpenAIRE

    Coubard, Olivier A.

    2016-01-01

    Since the seminal report by Shapiro that bilateral stimulation induces cognitive and emotional changes, 26 years of basic and clinical research have examined the effects of Eye Movement Desensitization and Reprocessing (EMDR) in anxiety disorders, particularly in post-traumatic stress disorder (PTSD). The present article aims at better understanding EMDR neural mechanism. I first review procedural aspects of EMDR protocol and theoretical hypothesis about EMDR effects, and develop the reasons ...

  20. An integrative model for the neural mechanism of Eye Movement Desensitization and Reprocessing (EMDR)

    OpenAIRE

    Coubard, Olivier A.

    2016-01-01

    Since the seminal report by Shapiro that bilateral stimulation induces cognitive and emotional changes, twenty-six years of basic and clinical research have examined the effects of Eye Movement Desensitization and Reprocessing (EMDR) in anxiety disorders, particularly in Post-Traumatic Stress Disorder (PTSD). The present article aims at better understanding EMDR neural mechanism. I first review procedural aspects of EMDR protocol and theoretical hypothesis about EMDR effects, and develop the ...

  1. Lanthanides extraction processes in molten fluoride media. Application to nuclear spent fuel reprocessing

    OpenAIRE

    Taxil, Pierre; Massot, Laurent; Nourry, Christophe; Gibilaro, Mathieu; Chamelot, Pierre; Cassayre, Laurent

    2009-01-01

    This paper describes four techniques of extraction of lanthanides elements (Ln) from molten salts in the general frame of reprocessing nuclear wastes; One of them is chemical: the precipitation of Ln ions in insoluble compounds (oxides or oxifluorides); the others use electrochemical methodology in molten fluorides for extraction and measurement of the progress of the processes: first electrodeposition of pure Ln metals on an inert cathode material was proved to be incomplete and cause probl...

  2. Electrochemical reduction of metal oxides in molten salts for nuclear reprocessing

    OpenAIRE

    Abdulaziz, R.

    2016-01-01

    This thesis examines the electrochemical reduction of metal oxides in molten salts for nuclear reprocessing applications. The objective of this research is to characterise and understand the direct electrochemical reduction of UO₂ to U metal in a LiCl-KCl molten salt eutectic, as part of the nuclear pyroprocessing scheme, following a similar approach to the FFC Cambridge for the reduction of TiO₂ to Ti metal. The voltammetric behaviour of reduction processes of metal oxides were evaluated usi...

  3. Reprocessed and combined thorium fuel cycles in a PER system with a micro heterogeneous approaches

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Fabiana B.A.; Castro, Victor F.; Faria, Rochkhudson B. de; Pereira, Claubia; Fortini, Angela, E-mail: fabianabeghini@yahoo.com.br, E-mail: victorfariacastro@gmail.com, E-mail: rochkdefaria@yahoo.com.br, E-mail: claubia@nuclear.ufmg.br, E-mail: fortini@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear

    2015-07-01

    A micro heterogeneous approaches were used to study the behavior of reprocessed fuel spiked with thorium in a PWR fuel element considering (TRU-Th) cycle. The goal is to achieve a higher burnup using three different configurations to model the fuel element using SCALE 6.0. The reprocessed fuels were obtained using the ORIGEN 2.1 code from a spent PWR standard fuel (33,000 MWd/tHM burned), with 3.1% of initial enrichment. The spent fuel remained in the cooling pool for five years and then reprocessed using the UREX+ technique. Three configurations of micro heterogeneous approaches were analyzed, and the k{sub inf} and plutonium evolution during the burnup were evaluated. The preliminary results show that the behavior of advanced fuel based on transuranic elements spiked with thorium, and micro heterogeneous approach are satisfactory in PWRs, and the configuration that use a combination of Th and TRU (configuration 1) seems to be the most promising once has higher values for k{sub inf} during the burnup, compared with other configurations. (author)

  4. Influence of Reprocessing in the formation of functional groups during low density polyethylene aging

    Directory of Open Access Journals (Sweden)

    Maurício M. Selonke

    2012-01-01

    Full Text Available In recent years, the interest in polymer recycling has increased. However, in every reprocessing step the material undergoes shear stress and is affected by temperature and oxygen. The aim of this paper is to investigate the influence of multiple extrusion in the generation of functional groups, namely hydroperoxide, carbonyl, and transvinylene. Low density polyethylene was reprocessed three times in a single screw extruder. In each recycling step hot pressed films were prepared. These films were submitted to a heat treatment in an oven with air circulation and renovation to proceed with aging tests at different times and temperatures. The results obtained showed that all functional groups had their concentration increased with the increase in number of reprocessing, the aging time and temperature of the heat treatment. The factorial design was applied to verify the influence of these parameters. All the parameters had significant effects, since their regression coefficients had the same order of magnitude, with the most influential parameter being the aging temperature, followed by the aging time and number of extrusions. Most of the interactions were influential, indicating that the formation of functional groups depends upon their interaction, and not only on their isolated effects.

  5. Basic research on separation control of long life nuclides in fuel reprocessing processes

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Atsuyuki; Usami, Go [Tokyo Univ. (Japan). Faculty of Engineering; Maeda, Mitsuru; Fujine, Sachio; Uchiyama, Gunzo; Kihara, Takehiro; Asakura, Toshihide; Hotoku, Shinobu

    1996-01-01

    The behavior of technetium (Tc) in nuclear fuel reprocessing processes has become the subject to be elucidated in the transition to distribution process by coextraction and the catalytic action in distribution process. In order to forecast or control the behavior of Tc in reprocessing processes, it is necessary to understand that at which valence Tc exists stably in respective processes. Tc is stable at 7 valence in nitric acid solution expected in reprocessing. In this research, the reaction speed of the oxidation and reduction reactions of rhenium (Re) which simulates Tc was measured by laser Raman spectroscopy which can do high speed analysis of valence. The experimental method is explained. The Raman spectra of Re in the experimental system of this research were measured in perchloric acid solution and nitric acid solution, and compared with the values in literatures. As the result, the validity of this research was assured. It was confirmed that Re(7) was not reduced by sulfamic acid and ascorbic acid. Re(7) was reduced by thiocyanic acid once, but was oxidized again by the reaction of thiocyanic acid and nitric acid. (K.I.)

  6. Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

    Directory of Open Access Journals (Sweden)

    Mariana Fexina Tomé

    2015-06-01

    Full Text Available OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$ originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%. It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%. CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

  7. Effectiveness of Eye Movement Desensitization and Reprocessing Therapy on Public Speaking Anxiety of University Students

    Directory of Open Access Journals (Sweden)

    Jalil Aslani

    2014-08-01

    Full Text Available Background: Public speaking anxiety is a prominent problem in the college student population. The purpose of this study was to determine the effectiveness of eye movement desensitization and reprocessing on public speaking anxiety of college students. Materials and Methods: The design of research was quasi-experimental with pre-post test type, and control group. The sample consistent of 30 students with speech anxiety that selected base on available sampling and assigned randomly in experimental (N=15 and control (N=15 groups. The experimental group was treated with EMDR therapy for 7 sessions. In order to collect the data, Paul’s personal report of confidence as a speaker, S-R inventory of anxiousness was used. To analyze the data, SPSS-19 software and covariance analysis were used. Results: The multivariate analysis of covariance showed that the eye movement desensitization and reprocessing reducing public speaking anxiety. The one-way analysis of covariance for each variable shows there are significant differences in confidence of speaker (p=0.001 and physiological symptoms of speech anxiety (p=0.001 at the two groups. Conclusion: These results suggest that treatment of eye movement desensitization and reprocessing is effective on reducing physiological symptoms of speech anxiety and increasing the speaker’s confidence.

  8. Effect of compatibilization and reprocessing on the isothermal crystallization kinetics of polypropylene/wood flour composites

    Directory of Open Access Journals (Sweden)

    Arieny Rodrigues

    2013-01-01

    Full Text Available Numerous studies have focused on polymer mixtures aimed at the potential applications of these materials. This work analyzed the effect of polymer reprocessing and the type and concentration of compatibilizer on the isothermal crystallization kinetics of polypropylene/wood flour composites. The composites, which were polypropylene grafted with acrylic acid (PP-g-AA and maleic anhydride (PP-g-MA, were processed in a twin screw extruder with and without compatibilizer. Reprocessed polypropylene reached complete crystallization in less time than the composites with virgin polypropylene. The addition of wood flour to the composites did not change the kinetics significantly compared to that of the pure polymers, but the compatibilizers did, particularly PP-g-AA. The nucleation exponent (n and crystallization rate (K were calculated from Avrami plots. The values of n ranged from 2 to 3, indicating instantaneous to sporadic nucleation. The crystallization half-time of reprocessed polypropylene was shorter than that of virgin polypropylene and of the compositions containing PP-g-AA compatibilizer. The activation energy of crystallization and the equilibrium melting temperature were calculated, respectively, from Arrhenius and Hoffman-Weeks plots. Both of these parameters showed lower values in the composites, particularly in the ones containing compatibilizers.

  9. Swift Monitoring of NGC 4151: Evidence for a Second X-Ray/UV Reprocessing

    Science.gov (United States)

    Edelson, R.; Gelbord, J.; Cackett, E.; Connolly, S.; Done, C.; Fausnaugh, M.; Gardner, E.; Gehrels, N.; Goad, M.; Horne, K.; McHardy, I.; Peterson, B. M.; Vaughan, S.; Vestergaard, M.; Breeveld, A.; Barth, A. J.; Bentz, M.; Bottorff, M.; Brandt, W. N.; Crawford, S. M.; Dalla Bontà, E.; Emmanoulopoulos, D.; Evans, P.; Figuera Jaimes, R.; Filippenko, A. V.; Ferland, G.; Grupe, D.; Joner, M.; Kennea, J.; Korista, K. T.; Krimm, H. A.; Kriss, G.; Leonard, D. C.; Mathur, S.; Netzer, H.; Nousek, J.; Page, K.; Romero-Colmenero, E.; Siegel, M.; Starkey, D. A.; Treu, T.; Vogler, H. A.; Winkler, H.; Zheng, W.

    2017-05-01

    Swift monitoring of NGC 4151 with an ˜6 hr sampling over a total of 69 days in early 2016 is used to construct light curves covering five bands in the X-rays (0.3-50 keV) and six in the ultraviolet (UV)/optical (1900-5500 Å). The three hardest X-ray bands (>2.5 keV) are all strongly correlated with no measurable interband lag, while the two softer bands show lower variability and weaker correlations. The UV/optical bands are significantly correlated with the X-rays, lagging ˜3-4 days behind the hard X-rays. The variability within the UV/optical bands is also strongly correlated, with the UV appearing to lead the optical by ˜0.5-1 days. This combination of ≳3 day lags between the X-rays and UV and ≲1 day lags within the UV/optical appears to rule out the “lamp-post” reprocessing model in which a hot, X-ray emitting corona directly illuminates the accretion disk, which then reprocesses the energy in the UV/optical. Instead, these results appear consistent with the Gardner & Done picture in which two separate reprocessings occur: first, emission from the corona illuminates an extreme-UV-emitting toroidal component that shields the disk from the corona; this then heats the extreme-UV component, which illuminates the disk and drives its variability.

  10. Effect of reprocessing cycles on the degradation of polypropylene copolymer filled with talc or montmorillonite during injection molding process

    Energy Technology Data Exchange (ETDEWEB)

    Demori, R.; Mauler, R. S., E-mail: raquel.mauler@ufrgs.br [Chemistry Institute, Federal University of Rio Grande do Sul, UFRGS, Av. Bento Gonçalves, 9500, Porto Alegre, 91501-970 (Brazil); Ashton, E.; Weschenfelder, V. F.; Cândido, L. H. A.; Kindlein, W. [Laboratory of Design LDSM, Federal University of Rio Grande do Sul, UFRGS (Brazil)

    2015-05-22

    Mechanical recycling of polymeric materials is a favorable technique resulting in economic and environmental benefits, especially in the case of polymers with a high production volume as the polypropylene copolymer (PP). However, recycling by reprocessing techniques can lead to thermal, mechanical or thermo-oxidative degradation that can affect the structure of the polymer and subsequently the material properties. PP filled with montmorillonite (MMT) or talc are widely produced and studied, however, its degradation reactions by reprocessing cycles are poorly studied so far. In this study, the effects of reprocessing cycles in the structure and in the properties of the PP/MMT and PP/Talc were evaluated. The samples were mixed with 5% talc or MMT Cloisite C15A in a twin-screw extrusion. After extrusion, this filled material was submitted to five reprocessing cycles through an injection molding process. In order to evaluate the changes induced by reprocessing techniques, the samples were characterized by DSC, FT-IR, Izod impact and tensile strength tests. The study showed that Young modulus, elongation at brake and Izod impact were not affected by reprocessing cycles, except when using talc. In this case, the elongation at brake reduced until the fourth cycle, showing rigidity increase. The DSC results showed that melting and crystallization temperature were not affected. A comparison of FT-IR spectra of the reprocessed indicated that in both samples, between the first and the fifth cycle, no noticeable change has occurred. Thus, there is no evidence of thermo oxidative degradation. In general, these results suggest that PP reprocessing cycles using MMT or talc does not change the material properties until the fifth cycle.

  11. Monitoring, Controlling and Safeguarding Radiochemical Streams at Spent Fuel Reprocessing Facilities with Optical and Gamma-Ray Spectroscopic Methods

    Energy Technology Data Exchange (ETDEWEB)

    Schwantes, Jon M.; Bryan, Samuel A.; Orton, Christopher R.; Levitskaia, Tatiana G.; Fraga, Carlos G.

    2012-11-06

    The International Atomic Energy Agency (IAEA) has established international safeguards standards for fissionable material at spent fuel reprocessing plants to ensure that significant quantities of weapons-useable nuclear material are not diverted from these facilities. For large throughput nuclear facilities, it is difficult to satisfy the IAEA safeguards accountancy goal for detection of abrupt diversion. Currently, methods to verify material control and accountancy (MC&A) at these facilities require time-consuming and resourceintensive destructive assay (DA). Leveraging new on-line non-destructive assay (NDA) process monitoring techniques in conjunction with the traditional and highly precise DA methods may provide an additional measure to nuclear material accountancy which would potentially result in a more timely, cost-effective and resource efficient means for safeguards verification at such facilities. By monitoring process control measurements (e.g. flowrates, temperatures, or concentrations of reagents, products or wastes), abnormal plant operations can be detected. Pacific Northwest National Laboratory (PNNL) is developing on-line NDA process monitoring technologies based upon gamma-ray and optical spectroscopic measurements to potentially reduce the time and resource burden associated with current techniques. The Multi-Isotope Process (MIP) Monitor uses gamma spectroscopy and multivariate analysis to identify offnormal conditions in process streams. The spectroscopic monitor continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major stable flowsheet reagents using UV-Vis, Near IR and Raman spectroscopy. Multi-variate analysis is also applied to the optical measurements in order to quantify concentrations of analytes of interest within a complex array of radiochemical streams. This paper will provide an overview of these methods and reports on-going efforts to develop

  12. Monitoring, Controlling and Safeguarding Radiochemical Streams at Spent Fuel Reprocessing Facilities, Part 2: Gamma-Ray Spectroscopic Methods

    Energy Technology Data Exchange (ETDEWEB)

    Schwantes, Jon M.; Bryan, Samuel A.; Orton, Christopher R.; Levitskaia, Tatiana G.; Fraga, Carlos G.

    2012-02-10

    The International Atomic Energy Agency (IAEA) has established international safeguards standards for fissionable material at spent fuel reprocessing plants to ensure that significant quantities of weapons-useable nuclear material are not diverted from these facilities. For large throughput nuclear facilities, it is difficult to satisfy the IAEA safeguards accountancy goal for detection of abrupt diversion. Currently, methods to verify material control and accountancy (MC&A) at these facilities require time-consuming and resource-intensive destructive assay (DA). Leveraging new on-line non-destructive assay (NDA) process monitoring techniques in conjunction with the traditional and highly precise DA methods may provide an additional measure to nuclear material accountancy which would potentially result in a more timely, cost-effective and resource efficient means for safeguards verification at such facilities. By monitoring process control measurements (e.g. flowrates, temperatures, or concentrations of reagents, products or wastes), abnormal plant operations can be detected. Pacific Northwest National Laboratory (PNNL) is developing on-line NDA process monitoring technologies based upon gamma-ray and optical spectroscopic measurements to potentially reduce the time and resource burden associated with current techniques. The Multi-Isotope Process (MIP) Monitor uses gamma spectroscopy and multivariate analysis to identify off-normal conditions in process streams. The spectroscopic monitor continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major stable flowsheet reagents using UV-Vis, Near IR and Raman spectroscopy. Multi-variate analysis is also applied to the optical measurements in order to quantify concentrations of analytes of interest within a complex array of radiochemical streams. This paper will provide an overview of these methods and reports on-going efforts to develop

  13. Progress report on evaluation of potential impact of /sup 14/C releases from an HTGR reprocessing facility

    Energy Technology Data Exchange (ETDEWEB)

    Killough, G.G.; Dixon, K.R.; Edwards, N.T.; Murphy, B.D.; Rohwer, P.S.; Harris, W.F.; Kaye, S.V.

    1976-07-01

    The potential radiological impacts of atmospheric releases of /sup 14/CO/sub 2/ are assessed for a model HTGR reprocessing facility. Two off-gas systems were considered: (1) a 300-ft stack with no thermal output, and (2) a 1000-ft stack with a stack gas temperature of 80/sup 0/C and heat output of 4.2 x 10/sup 7/ Btu/hr. Meteorological data for the Oak Ridge area were used with an assumed annual release rate of 5000 Ci as input to an atmospheric transport model, which in turn was used to predict air concentrations of /sup 14/C at points of habitation and food production in the local area (within 50 miles) of the facility. The total-body dose rates estimated for the average resident living in the local area were 0.107 mrem/yr for the 300-ft stack and 0.063 mrem/yr for the 1000-ft stack. Population doses were computed for a population of 10/sup 6/ individuals uniformly distributed within the 50-mile local area of the facility; these were 110 man-rem for the 300-ft stack and 63 man-rem for the 1000-ft stack. The results of these dose calculations suggest that a 1000-ft stack would be very effective in reducing the estimated doses. Plant growth carbon assimilation model was derived in order to investigate the adequacy of the assumption of tissue equilibration with time-averaged ambient specific activity as a basis for dose estimates. Simulation runs with these models suggest that in the presence of frequent fluctuations of large amplitude in the ambient air /sup 14/CO/sub 2/ concentrations, specific activity in plant tissue can exceed conventionally calculated time-averaged specific activity.

  14. 10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

    Science.gov (United States)

    2010-01-01

    ... the written procedures or check lists by appropriately trained personnel not having direct..., approval, release, distribution, and revision of documents involving design interfaces. The design...

  15. The reprocessing of advanced mixed lithium orthosilicate/metatitanate tritium breeder pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Leys, Oliver, E-mail: oliver.leys@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Bergfeldt, Thomas; Kolb, Matthias H.H.; Knitter, Regina [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Goraieb, Aniceto A. [Karlsruhe Beryllium Handling Facility, Eggenstein-Leopoldshafen, 76344 (Germany)

    2016-06-15

    Highlights: • The recycling of advanced breeder pebbles without a deterioration of the material properties is possible using a melt-based process. • The only accumulation of impurities upon reprocessing, results from the platinum crucible alloy used for processing. • It is possible to replenish burnt-up lithium by additions of LiOH·H{sub 2}O to the melt during reprocessing. - Abstract: The recycling of tritium breeding materials will be necessary for any future use of nuclear fusion energy due to economical as well as ecological considerations. In the case of the solid breeder blanket concept, the ceramic pebble beds that are intended for the generation of tritium will eventually need to be restored due to depleted lithium levels as well as due to fractured pebbles, which will cause a deterioration of the pebble bed properties. It is proposed that the pebbles, which are fabricated using a melt-based process, are recycled using the same initial process, by replenishing the lithium levels and reforming the pebbles at the same time. To prove this recycling scheme, advanced ceramic pebbles were fabricated and then re-melted multiple times to prove that the reprocessing did not have any negative effect on the pebble properties and secondly, pebbles were produced with a simulated lithium burn-up and subsequently replenished by additions of LiOH to the melt. It was shown that the re-melting and lithium re-enrichment had no effect on the pebble properties, demonstrating that a melt-based process is suitable for recycling used breeder pebbles.

  16. Analysis of global climate variability from homogenously reprocessed ground-based GNSS measurements

    Science.gov (United States)

    Ahmed, Furqan; Hunegnaw, Addisu; Teferle, Felix Norman; Bingley, Richard

    2015-04-01

    The tropospheric delay information obtained through long-term homogenous reprocessing of Global Navigation Satellite System (GNSS) observations can be used for climate change and variability analysis on a global scale. A reprocessed global dataset of GNSS-derived zenith total delay (ZTD) and position estimates, based on the network double differencing (DD) strategy and covering 1994-2012, has been recently produced at the University of Luxembourg using the Bernese GNSS Software 5.2 (BSW5.2) and the reprocessed products from the Centre for Orbit Determination in Europe (CODE). The network of ground-based GNSS stations processed to obtain this dataset consists of over 400 globally distributed stations. The GNSS-derived ZTD has been validated by comparing it to that derived from reanalysis data from the European Centre for Medium-Range Weather Forecasts (ECMWF). After validation and quality control, the ZTD dataset obtained using the DD strategy has been used to investigate the inter-annual, seasonal and diurnal climate variability and trends in the tropospheric delay on various regional to global spatial scales. Precise point positioning (PPP) is a processing strategy for GNSS observations which is based on observations from a single station rather than a network of baselines and is therefore computationally more efficient than the DD strategy. However, the two processing strategies, i.e. DD and PPP, have their own strengths and weaknesses and could affect the solutions differently at different geographical locations. In order to explore the use of PPP strategy for climate monitoring, another experimental dataset covering a shorter period has been produced using the PPP strategy and compared to the DD based ZTD dataset.

  17. Consolidated Fuel-Reprocessing Program. Progress report, April 1 to June 30, 1983

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-01

    All research and development on fuel reprocessing in the United States is managed under the Consolidated Fuel Reprocessing Program. Technical progress is reported in overview fashion. Conceptual studies for the proposed Breeder Reprocessing Engineering Test (BRET) have continued. Studies to date have confirmed the feasibility of modifying an existing DOE facility at Hanford, Washington. A study to measure the extent of plutonium polymerization during steam-jet transfers of nitric acid solutions indicated polymer would appear only after several successive transfers at temperatures of 75/sup 0/C or higher. Fast-Flux Test Facility fuel was processed for the first time in the Solvent Extraction Test Facility. Studies of krypton release from pulverized sputter-deposited Ni-Y-Kr matrices have shown that the release rate is inversely proportional to the particle radius at 200/sup 0/C. Preparation of the initial 500-g batch of mixed oxide gel-spheres was completed. Fabrication processing at HEDL of mixed oxide gel-spheres (DIPRES process) was initiated. Operational testing of both 8 packs of the centrifugal contactor has been completed. Fabrication of both the prototypical disassembly system and the prototypical shear system has been initiated. Planning for FY 1984 installation and modification work in the integrated equipment list facility was completed. Acceptance tests of the original Integrated Process Demonstration system have been completed. Instrumentation and controls work with the prototype multiwavelength uranium photometer was successful and has been expanded to continuously and simultaneously monitor three process streams (raffinate, aqueous feed, and organic strip) in the secondary extraction cycle. Major efforts of the environmental, safeguards, and waste management areas were directed toward providing data for BRET.

  18. Prolonged Exposure versus Eye Movement Desensitization and Reprocessing (EMDR) for PTSD rape victims.

    Science.gov (United States)

    Rothbaum, Barbara Olasov; Astin, Millie C; Marsteller, Fred

    2005-12-01

    This controlled study evaluated the relative efficacy of Prolonged Exposure (PE) and Eye Movement Desensitization and Reprocessing (EMDR) compared to a no-treatment wait-list control (WAIT) in the treatment of PTSD in adult female rape victims (n = 74). Improvement in PTSD as assessed by blind independent assessors, depression, dissociation, and state anxiety was significantly greater in both the PE and EMDR group than the WAIT group (n = 20 completers per group). PE and EMDR did not differ significantly for change from baseline to either posttreatment or 6-month follow-up measurement for any quantitative scale.

  19. XMM-Newton On-demand Reprocessing Using SaaS Technology

    Science.gov (United States)

    Ibarra, A.; Fajersztejn, N.; Loiseau, N.; Gabriel, C.

    2014-05-01

    We present here the architectural design of the new on-the-fly reprocessing capabilities that will be soon developed and implemented in the new XMM-Newton Science Operation Centre. The inclusion of processing capabilities into the archive, as we plan, will be possible thanks to the recent refurbishment of the XMM-Newton science archive, its alignment with the latest web technologies and the XMM-Newton Remote Interface for Science Analysis (RISA), a revolutionary idea of providing processing capabilities through internet services.

  20. Apparatus and method for reprocessing and separating spent nuclear fuels. [Patent application

    Science.gov (United States)

    Krikorian, O.H.; Grens, J.Z.; Parrish, W.H. Sr.

    1982-01-19

    Spent nuclear fuels, including actinide fuels, volatile and non-volatile fission products, are reprocessed and separated in a molten metal solvent housed in the reaction region of a separation vessel which includes a reflux region positioned above the molten tin solvent. The reflux region minimizes loss of evaporated solvent during the separation of the actinide fuels from the volatile fission products. Additionally, inclusion of the reflux region permits the separation of the more volatile fission products (noncondensable) from the less volatile ones (condensable).

  1. Current liquid metal cooled fast reactor concepts: use of the dry reprocess fuel

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jee Won; Jeong, C. J.; Yang, M. S

    2003-03-01

    Recent Liquid metal cooled Fast Reactor (LFR) concepts are reviewed for investigating the potential usability of the Dry Reprocess Fuel (DRF). The LFRs have been categorized into two different types: the sodium cooled and the lead cooled systems. In each category, overall design and engineering concepts are collected which includes those of S-PRISM, AFR300, STAR, ENHS and more. Specially, the nuclear fuel types which can be used in these LFRs, have been summarized and their thermal, physical and neutronic characteristics are tabulated. This study does not suggest the best-matching LFR for the DRF, but shows good possibility that the DRF fuel can be used in future LFRs.

  2. Re-use of explanted osteosynthesis devices: a reliable and inexpensive reprocessing protocol.

    Science.gov (United States)

    Danesi, Valentina; Cristofolini, Luca; Stea, Susanna; Traina, Francesco; Beraudi, Alina; Tersi, Luca; Harman, Melinda; Viceconti, Marco

    2011-10-01

    Orthopaedic surgical treatments emphasizing immobilization using open reduction and internal fixation with osteosynthesis devices are widely accepted for their efficacy in treating complex fractures and reducing permanent musculoskeletal deformity. However, such treatments are profoundly underutilized in low- and middle-income countries (LMIC), partially due to inadequate availability of the costly osteosynthesis devices. Orthopaedic surgeons in some LMIC regularly re-use osteosynthesis devices in an effort to meet treatment demands, even though such devices typically are regulated for single-use only. The purpose of this study is to report a reprocessing protocol applied to explanted osteosynthesis devices obtained at a leading trauma care hospital. Explanted osteosynthesis devices were identified through a Register of Explanted Orthopaedic Prostheses. Guidelines to handle ethical issues were approved by the local Ethical Committee and informed patient consent was obtained at the time of explant surgery. Primary acceptance criteria were established and applied to osteosynthesis devices explanted between 2005 and 2008. A rigorous protocol for conducting decontamination and visual inspection based on specific screening criteria was implemented using simple equipment that is readily available in LMIC. A total of 2050 osteosynthesis devices, including a large variety of plates, screws and staples, were reprocessed using the decontamination and inspection protocols. The acceptance rate was 66%. Estimated labour time and implementation time of the protocol to reprocess a typical osteosynthesis unit (1 plate and 5 screws) was 25 min, with an estimated fixed cost (in Italy) of €10 per unit for implementing the protocol, plus an additional €5 for final sterilization at the end-user hospital site. This study was motivated by the treatment demands encountered by orthopaedic surgeons providing medical treatment in several different LMIC and their need for access to basic

  3. Process behavior and environmental assessment of /sup 14/C releases from an HTGR fuel reprocessing facility

    Energy Technology Data Exchange (ETDEWEB)

    Snider, J.W.; Kaye, S.V.

    1976-01-01

    Large quantities of /sup 14/CO/sub 2/ will be evolved when graphite fuel blocks are burned during reprocessing of spent fuel from HTGR reactors. The possible release of some or all of this /sup 14/C to the environment is a matter of concern which is investigated in this paper. Various alternatives are considered in this study for decontaminating and releasing the process off-gas to the environment. Concomitant radiological analyses have been done for the waste process scenarios to supply the necessary feedbacks for process design.

  4. The Development of a Quality Management Framework for Evaluating Medical Device Reprocessing Practice in Healthcare Facilities.

    Science.gov (United States)

    Lorv, Bailey; Horodyski, Robin; Welton, Cynthia; Vail, John; Simonetto, Luca; Jokanovic, Danilo; Sharma, Richa; Mahoney, Angela Rea; Savoy-Bird, Shay; Bains, Shalu

    2017-01-01

    There is increasing awareness of the importance of medical device reprocessing (MDR) for the provision of safe patient care. Although industry service standards are available to guide MDR practices, there remains a lack of published key performance indicators (KPIs) and targets that are necessary to evaluate MDR quality for feedback and improvement. This article outlines the development of an initial framework that builds on established guidelines and includes service standards, KPIs and targets for evaluating MDR operations. This framework can support healthcare facilities in strengthening existing practices and enables a platform for collaboration towards better MDR performance management.

  5. Research on advanced aqueous reprocessing of spent nuclear fuel: literature study

    Energy Technology Data Exchange (ETDEWEB)

    Van Hecke, K.; Goethals, P.

    2006-07-15

    The goal of the partitioning and transmutation strategy is to reduce the radiotoxicity of spent nuclear fuel to the level of natural uranium in a short period of time (about 1000 years) and thus the required containment period of radioactive material in a repository. Furthermore, it aims to reduce the volume of waste requiring deep geological disposal and hence the associated space requirements and costs. Several aqueous as well as pyrochemical separation processes have been developed for the partitioning of the long-lived radionuclides from the remaining of the spent fuel. This report aims to describe and compare advanced aqueous reprocessing methods.

  6. Internet-delivered eye movement desensitization and reprocessing (iEMDR): an open trial

    OpenAIRE

    Jay Spence; Nickolai Titov; Luke Johnston; Dear, Blake F.; Bethany Wootton; Matthew Terides; Judy Zou

    2013-01-01

    Recent research indicates internet-delivered cognitive behavioural therapy (iCBT) can reduce symptoms of post traumatic stress disorder (PTSD). This study examined the efficacy of an internet-delivered treatment protocol that combined iCBT and internet-delivered eye movement desensitization and reprocessing (iEMDR), in an uncontrolled trial. Eleven of the 15 participants completed post-treatment questionnaires. Large effect sizes were found from pre-treatment to 3-month follow-up ( d = 1.03 –...

  7. Health technology assessment on reprocessing single-use catheters for cardiac electrophysiology: results of a three-years study.

    Science.gov (United States)

    Tessarolo, F; Disertori, M; Caola, I; Guarrera, G M; Favaretti, C; Nollo, G

    2007-01-01

    The study aims to define the technical, ethical, juridical and economic issues involved in the assessment of a reprocessing policy for single-use interventional cardiac devices (SUDs). The feasibility of reprocessing was evaluated for cardiac electrophysiology catheters by comparing the chemical, physical and functional properties of new and reprocessed devices. The issue of hygiene was addressed by developing microbiological tests for the quantification of bioburden, sterility and pyrogenic load. The results of more than 1500 tests, conducted on 531 catheters, suggested a precautionary number of regenerations of five cycles. The ethical aspects were reviewed and the European juridical framework was assessed, revealing a need for harmonization. Applying a specific economic model, potential savings were calculated for a representative cardiology department and estimated at national and European level. Potential savings of 41.2% and 32.9% were calculated for diagnostic and ablation catheters, respectively. Safe and effective reprocessing of SUDs could be pursued if quality control processes and certified procedures are met. A reprocessing policy in EP laboratory could lead to savings of about 27,250 euros per 100,000 population, but the economic benefits are strongly dependent on the maximum number of regenerations and the regeneration rate.

  8. Idaho Chemical Processing Plant and Plutonium-Uranium Extraction Plant phaseout/deactivation study

    Energy Technology Data Exchange (ETDEWEB)

    Patterson, M.W. [Westinghouse Idaho Nuclear Co., Idaho Falls, ID (United States); Thompson, R.J. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-01-01

    The decision to cease all US Department of Energy (DOE) reprocessing of nuclear fuels was made on April 28, 1992. This study provides insight into and a comparison of the management, technical, compliance, and safety strategies for deactivating the Idaho Chemical Processing Plant (ICPP) at Westinghouse Idaho Nuclear Company (WINCO) and the Westinghouse Hanford Company (WHC) Plutonium-Uranium Extraction (PUREX) Plant. The purpose of this study is to ensure that lessons-learned and future plans are coordinated between the two facilities.

  9. Influence of releases of (129)I and (137)Cs from European reprocessing facilities in Fucus vesiculosus and seawater from the Kattegat and Skagerrak areas.

    Science.gov (United States)

    Gómez-Guzmán, J M; Holm, E; Niagolova, N; López-Gutiérrez, J M; Pinto-Gómez, A R; Abril, J A; García-León, M

    2014-08-01

    (129)I is a very long-lived radionuclide (T1/2=15.7×10(6) years) that is present in the environment because of natural and anthropogenic sources. Compared to the pre-nuclear era, large amounts of (129)I have been released to the marine environment, especially as liquid and gaseous discharges from two European reprocessing facilities located at Sellafield (England) and La Hague (France). The marine environment, i.e., the oceans, is the major source of iodine. Brown seaweed accumulates iodine at high levels up to 1.0% of dry weigh, and therefore they are ideal bioindicators for studying levels of (129)I. In this work, (129)I concentrations have been determined in seaweed Fucus vesiculosus and seawater collected in the Kattegat and Skagerrak areas in July 2007. The resulting data were evaluated in terms of (129)I concentrations and (129)I/(137)Cs ratios. (129)I concentrations were found to be in the order of (44-575)×10(9) atoms g(-1) in seaweed and (5.4-51)×10(9) atoms g(-1) in seawater, with an enhancement in the Skagerrak area in comparison to the Kattegat area. Iodine-129 concentrations in both seaweed and seawater were used to determine the concentration factor of iodine in brown seaweed F. vesiculosus. The high levels of (129)I and (129)I/(137)Cs ratios in the Skagerrak area and their gradually decreasing trend to the Kattegat indicates that the most important contribution to the (129)I inventory in those areas comes from Sellafield and La Hague reprocessing plants.

  10. Contaminants of the bismuth phosphate process as signifiers of nuclear reprocessing history.

    Energy Technology Data Exchange (ETDEWEB)

    Schwantes, Jon M.; Sweet, Lucas E.

    2012-10-01

    Reagents used in spent nuclear fuel recycling impart unique contaminant patterns into the product stream of the process. Efforts are underway at Pacific Northwest National Laboratory to characterize and understand the relationship between these patterns and the process that created them. A main challenge to this effort, recycling processes that were employed at the Hanford site from 1944-1989 have been retired for decades. This precludes direct measurements of the contaminant patterns that propagate within product streams of these facilities. In the absence of any operating recycling facilities at Hanford, we have taken a multipronged approach to cataloging contaminants of U.S. reprocessing activities using: (1) historical records summarizing contaminants within the final Pu metal button product of these facilities; (2) samples of opportunity that represent intermediate products of these processes; and (3) lab-scale experiments and model simulations designed to replicate contaminant patterns at each stage of nuclear fuel reprocessing. This report provides a summary of the progress and results from Fiscal Year (April 1, 2010-September 30) 2011.

  11. Advanced aqueous reprocessing in P and T strategies: process demonstrations on genuine fuels and targets

    Energy Technology Data Exchange (ETDEWEB)

    Satmark, B.; Apostolidis, C.; Courson, O.; Malmbeck, R.; Carlos, R.; Pagliosa, G.; Romer, K.; Glatz, J.P. [European Commission, DG-JRC, Institute for Transuranium Elements, Hot Cell Technology, Karlsruhe (Germany)

    2000-07-01

    In the present work the performance of several processes used for advanced reprocessing of commercial LWR fuels as well as transmutation targets is compared. As a first step uranium and plutonium were recovered by PUREX type reprocessing. The raffinate, containing fission products, lanthanides and the minor actinides (MA) were used as feed for the second step in which minor actinides and lanthanides were separated from the bulk of the fission products. The five different processes tested use CMPO, DIDPA, TRPO, Diamide and CYANEX 923 as extractant. In the third step MA are separated from lanthanides. Here three processes were tested, i.e. using CYANEX 301, the synergistic mixture of di-chloro substituted CYANEX 301 and TOPO, and BTP solvents. Column-, batch- and continuous counter-current extraction techniques were used for the tests. The different processes will be described and discussed in terms of performances and efficiencies for Am and Cm. Efficient separation of MA from different genuine fuel solutions could be demonstrated and thereby also the possibility of closing a future transmutation fuel cycle. The combination, Diamide and BTP was found to be the best among extractants tested to achieve an efficient MA recovery from spent fuel. (authors)

  12. Advanced aqueous reprocessing in P and T strategies: process demonstrations on genuine fuels and targets

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, B.; Apostolidis, C.; Carlos, R.; Courson, O.; Glatz, J.P.; Malmbeck, R.; Pagliosa, G.; Roemer, K.; Serrano-Purroy, D. [European Commission, JRC, Inst. for Transuranium Elements, Karlsruhe (Germany)

    2004-07-01

    In the present work the performance of several processes used for advanced reprocessing of commercial LWR fuels as well as transmutation targets is compared. As a first step uranium and plutonium were recovered by PUREX type reprocessing. The raffinate, containing fission products including lanthanides and the minor actinides (MA) was used as feed for the second step in which minor actinides and lanthanides were separated from the bulk of the fission products. The five different processes tested use CMPO, DIDPA, TRPO, diamide and CYANEX 923 as extractants. In the third step MA are separated from lanthanides. Here three processes were tested, i.e. using CYANEX 301, the synergistic mixture of di-chloro substituted CYANEX 301 and TOPO, and BTP solvents. Column-, batch- and continuous counter-current extraction techniques were used for the tests. The different processes will be described and discussed in terms of performances and efficiencies for Am and Cm separation. Efficient separation of MA from different genuine fuel solutions could be demonstrated and thereby also the possibility of closing a future transmutation fuel cycle. The combination of diamide and BTP seems to be the best, among extractants tested, to achieve an efficient MA recovery from spent fuel. (orig.)

  13. Efficient method for variable reprocessing of paraffinic and highly paraffinic feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Odintsov, O.K.; Pereverzev, A.N.; Brovarskaya, S.S.

    1981-01-01

    Different procedures for reprocessing are necessary to obtain the maximum yields of desirable products and minimize the refining costs for feedstocks having significant concentrations of high molecular weight paraffins. A detailed processing scheme is given for each of two reprocessed oils: a Belorussian type containing 25-26 weight % n-paraffins in the kerosene-diesel fractions and a Romashkin crude from the ''Druzhba'' pipeline containing 13-15 weight % n-paraffins in the same fraction. The deparaffining process for the feedstocks must be stable and variable in response to the concentration of paraffins in the crude; an acceptable reactive fuel, complying with thermal stability requirements, was obtained in an 8% by volume yield and had an initial crystallization temperature of -55/sup 0/C and an aromatic content of 19 weight %; an acceptable fuel oil, complying with appropriate technical standards, was obtained by mixing the diesel fraction and fuel oil (in a 2:3 ratio) after the atmospheric distillation of the oil mixture from the ''Druzhba'' pipeline.

  14. Atmospheric dispersal of [sup 129]iodine from nuclear fuel reprocessing facilities

    Energy Technology Data Exchange (ETDEWEB)

    Moran, J.E.; Schink, D.R. (Texas A and M Univ., College Station, TX (United States). Dept. of Oceanography); Oktay, S.; Santschi, P.H. (Texas A and M Univ., Galveston, TX (United States). Dept. of Oceanography)

    1999-08-01

    [sup 129]I/[sup 127]I ratios measured in meteoric water and epiphytes from the continental United States are higher than those measured in coastal seawater or surface freshwater and suggest long-range atmospheric transport of [sup 129]I from the main source for the earth's surface inventory, viz., nuclear fuel reprocessing facilities. The median ratio for 14 meteoric water samples is 2100 [times] 10[sup [minus]12], corresponding to a [sup 129]I concentration of 2.5 [times] 10[sup 7] atoms/L, whereas 9 epiphyte samples have a median ratio of 1800 [times] 10[sup [minus]12]. Calculated deposition rates of [sup 129]I in the continental United States reveal that a small but significant fraction of the atmospheric releases from the nuclear fuel reprocessing facilities at Sellafield, England, and Cap de La Hague, France, is deposited after distribution by long-range transport. The inferred dominant mode of transport is easterly, within the troposphere, mainly in the form of the organic gas methyl iodide.

  15. Assessment of sensitivity of neutron-physical parameters of fast neutron reactor to purification of reprocessed fuel from minor actinides

    Science.gov (United States)

    Cherny, V. A.; Kochetkov, L. A.; Nevinitsa, A. I.

    2013-12-01

    The work is devoted to computational investigation of the dependence of basic physical parameters of fast neutron reactors on the degree of purification of plutonium from minor actinides obtained as a result of pyroelectrochemical reprocessing of spent nuclear fuel and used for manufacturing MOX fuel to be reloaded into the reactors mentioned. The investigations have shown that, in order to preserve such important parameters of a BN-800 type reactor as the criticality, the sodium void reactivity effect, the Doppler effect, and the efficiency of safety rods, it is possible to use the reprocessed fuel without separation of minor actinides for refueling (recharging) the core.

  16. Proof of Concept Simulations of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near-Real-Time Safeguards Monitor for Nuclear Fuel Reprocessing Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Schwantes, Jon M.

    2011-02-11

    The International Atomic Energy Agency (IAEA) will require the development of advanced technologies to effectively safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of nondestructive, near-real-time, autonomous process monitoring. This paper describes recent results from model simulations designed to test the Multi-Isotope Process (MIP) monitor, a novel approach to safeguarding reprocessing plants. The MIP monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in near-real-time. Three computer models including ORIGEN-ARP, AMUSE, and SYNTH were used in series to predict spent nuclear fuel composition, estimate element partitioning during separation, and simulate spectra from product and raffinate streams using a variety of gamma detectors, respectively. Simulations were generated for fuel with various irradiation histories and under a variety of plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup, and cooling time. Hierarchical cluster analysis (HCA) and partial least squares (PLS) were also used in the analysis. The MIP monitor was found to be sensitive to induced variations of several operating parameters including distinguishing ±2.5% variation from normal process acid concentrations. The ability of PLS to predict burnup levels from simulated spectra was also demonstrated to be within 3.5% of measured values.

  17. The Efficacy of Eye Movement Desensitization and Reprocessing Therapy Technique in the Treatment of Test Anxiety of College Students.

    Science.gov (United States)

    Enright, Matthew; Baldo, Tracy D.; Wykes, Scott D.

    2000-01-01

    Explores the efficacy of eye movement desensitization and reprocessing (EMDR) in the treatment of test anxiety. Thirty-five college students with test anxiety were assigned to either a treatment or delayed treatment control group. EMDR was shown to be effective in reducing overall test anxiety as well as "emotionality" and…

  18. Cationic gold staining of glomerular anionic sites in archived tissue, reprocessed from paraffin wax into LR gold resin.

    Science.gov (United States)

    Goode, N P; Shires, M; Aparicio, S R; Davison, A M

    1993-05-01

    Glomerular capillary wall anionic sites have been demonstrated by cationic gold staining of archived renal biopsy tissue (up to 10 years old), obtained from six patients, originally embedded in paraffin wax, and subsequently reprocessed into LR gold resin. The staining patterns at pH 2.5 and pH 7.0, demonstrating different glomerular basement membrane (GBM) anionic constituents, were compared in three patients from whom tissue directly processed into LR gold and reprocessed tissue was available. Ultrastructural preservation was poorer and shrinkage artefact greater in paraformaldehyde-lysine periodate (PLP) as opposed to formol saline-fixed reprocessed tissue. However, GBM anionic site expression was well preserved, or even enhanced (lamina rara externa, pH 7.0) in reprocessed tissue, using either fixative. Although it may not be possible to compare subtle changes in anionic site distribution in variously fixed and processed tissues, due to these artefacts, the technique enables retrospective study of charge status in archived material from disease groups in which there are distinct anionic site aberrations.

  19. REPROCESSING OF SHALLOW SEISMIC REFLECTION DATA TO IMAGE FAULTS NEAR A HAZARDOUS WASTE SITE ON THE OAK RIDGE RESERVATION, TENNESSEE

    Energy Technology Data Exchange (ETDEWEB)

    DOLL, W.E.

    1997-12-30

    Shallow seismic reflection data from Bear Creek Valley on the Oak Ridge Reservation demonstrates that spectral balancing and tomographic refraction statics can be important processing tools for shallow seismic data. At this site, reprocessing of data which had previously yielded no useable CMP stacked sections was successful after application of these processing techniques.

  20. Reprocessing of Shallow Seismic Reflection Data to Image Faults Near a Hazardous Waste Site on the Oak Ridge Reservation, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Doll, W.E.

    1997-12-31

    Shallow seismic reflection data from Bear Creek Valley on the Oak Ridge Reservation demonstrates that spectral balancing and tomographic refraction statics can be important processing tools for shallow seismic data. At this site, reprocessing of data which had previously yielded no usable CMP stacked sections was successful after application of these processing techniques.

  1. 75 FR 45167 - Notice of Public Workshop on a Potential Rulemaking for Spent Nuclear Fuel Reprocessing Facilities

    Science.gov (United States)

    2010-08-02

    ... civilian nuclear power globally and close the nuclear fuel cycle through reprocessing spent fuel and... Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor... regulations in 10 CFR Part 171, ``Annual Fees for Reactor Licenses and Fuel Cycle Licenses and......

  2. Brief eclectic psychotherapy v. eye movement desensitisation and reprocessing therapy for post-traumatic stress disorder: randomised controlled trial

    NARCIS (Netherlands)

    Nijdam, M.J.; Gersons, B.P.R.; Reitsma, J.B.; de Jongh, A.; Ollf, M.

    2012-01-01

    Background Trauma-focused cognitive-behavioural therapy (CBT) and eye movement desensitisation and reprocessing therapy (EMDR) are efficacious treatments for post-traumatic stress disorder (PTSD), but few studies have directly compared them using well-powered designs and few have investigated respon

  3. Eye movement desensitization and reprocessing therapy for personality disorders in older adults?

    Science.gov (United States)

    Gielkens, E M J; Sobczak, S; Van Alphen, S P J

    2016-10-01

    Eye Movement Desensitization and Reprocessing (EMDR) is a kind of psychotherapy, which is growing in popularity, particularly for treatment of post-traumatic stress disorder (PTSD). When Shapiro first introduced EMDR in 1989, it was approached as a controversial treatment because of lack of evidence. However, nowadays there is growing evidence for EMDR efficacy in PTSD (Mc Guire et al., 2014) and EMDR is recommended by international and national treatment guidelines for PTSD. Moreover, EMDR is also used for the treatment of other anxiety disorders, such as panic disorders (De Jongh et al., 2002). Furthermore, research continues on effects of EMDR in addiction, somatoform disorders and psychosis. So far, there is no empirical research on the efficacy of EMDR treatment in older adults.

  4. [Psychotherapeutic treatment of traumatic stress with the EMDR (Eye Movement Desensitization and Reprocessing) method].

    Science.gov (United States)

    Liebermann, P; Hofmann, A; Flatten, G

    2003-12-04

    EMDR (Eye Movement Desensitization and Reprocessing) is a method, developed at the end of the nineteen-eighties, for the treatment of the post-traumatic stress disorder (PTSD). The patient is asked to concentrate on certain aspect of the traumatic memory while keeping his eyes fixed on the movements of the therapist's finger. Apparently, this triggers information processing that results in appreciable relief for the patient. The method has proven to be equally as effective as behavioral-therapeutic techniques, and, has in the meantime, been included in national and international guidelines for the treatment of PTSD. The indications for EMDR treatment include not only PTSD, but, increasingly, also other, sometimes more severely chronic, it trauma sequelae. Within the framework of basic care, EMDR must be embedded within a treatment plan and should, where applicable, be combined with other methods.

  5. Eye movement desensitization and reprocessing in an adolescent with epilepsy and mild intellectual disability.

    Science.gov (United States)

    Rodenburg, Roos; Benjamin, Anja; Meijer, Anne Marie; Jongeneel, Ruud

    2009-09-01

    Intellectual disability is a comorbid condition in epilepsy. People with epilepsy and intellectual disability are at high risk of developing behavioral problems. Among the many contributors to behavioral problems in people with epilepsy and intellectual disability are those of traumatic experiences. As such, behavioral problems can be seen as a reflection of these traumatic experiences. Among established trauma therapies, eye movement desensitization and reprocessing (EMDR) is an emerging treatment that is effective in adults and also seems to be effective in children. This article is a case report of EMDR in an adolescent with epilepsy and mild intellectual disability, in whom the EMDR children's protocol was used. The aim was to assess whether clinical trauma status significantly diminished to nonclinical status posttreatment. Change in trauma symptoms was evaluated with the Reliable Change Index (RCI). Results showed a significant decrease in trauma symptoms toward nonclinical status from pretreatment to posttreatment. EMDR consequences for epilepsy and intellectual disability are discussed.

  6. Thoria-based nuclear fuels thermophysical and thermodynamic properties, fabrication, reprocessing, and waste management

    CERN Document Server

    Bharadwaj, S R

    2013-01-01

    This book presents the state of the art on thermophysical and thermochemical properties, fabrication methodologies, irradiation behaviours, fuel reprocessing procedures, and aspects of waste management for oxide fuels in general and for thoria-based fuels in particular. The book covers all the essential features involved in the development of and working with nuclear technology. With the help of key databases, many of which were created by the authors, information is presented in the form of tables, figures, schematic diagrams and flow sheets, and photographs. This information will be useful for scientists and engineers working in the nuclear field, particularly for design and simulation, and for establishing the technology. One special feature is the inclusion of the latest information on thoria-based fuels, especially on the use of thorium in power generation, as it has less proliferation potential for nuclear weapons. Given its natural abundance, thorium offers a future alternative to uranium fuels in nuc...

  7. Immobilization of fission products arising from pyrometallurgical reprocessing in chloride media

    Science.gov (United States)

    Leturcq, G.; Grandjean, A.; Rigaud, D.; Perouty, P.; Charlot, M.

    2005-12-01

    Spent nuclear fuel reprocessing to recover energy-producing elements such as uranium or plutonium can be performed by a pyrochemical process. In such method, the actinides and fission products are extracted by electrodeposition in a molten chloride medium. These processes generate chlorinated alkali salt flows contaminated by fission products, mainly Cs, Ba, Sr and rare earth elements constituting high-level waste. Two possible alternatives are investigated for managing this wasteform; a protocol is described for dechlorinating the fission products to allow vitrification, and mineral phases capable of immobilizing chlorides are listed to allow specification of a dedicated ceramic matrix suitable for containment of these chlorinated waste streams. The results of tests to synthesize chlorosilicate phases are also discussed.

  8. Reprocessing of Soft X-ray Emission Lines in Black Hole Accretion Disks

    Energy Technology Data Exchange (ETDEWEB)

    Mauche, C W; Liedahl, D A; Mathiesen, B F; Jimenez-Garate, M A; Raymond, J C

    2003-10-17

    By means of a Monte Carlo code that accounts for Compton scattering and photoabsorption followed by recombination, we have investigated the radiation transfer of Ly{alpha}, He{alpha}, and recombination continua photons of H- and He-like C, N, O, and Ne produced in the photoionized atmosphere of a relativistic black hole accretion disk. We find that photoelectric opacity causes significant attenuation of photons with energies above the O VIII K-edge; that the conversion efficiencies of these photons into lower-energy lines and recombination continua are high; and that accounting for this reprocessing significantly (by factors of 21% to 105%) increases the flux of the Ly{alpha} and He{alpha} emission lines of H- and He-like C and O escaping the disk atmosphere.

  9. Tier-1 reprocessing and other key grid computing activities within the ATLAS-Gridka cloud

    Energy Technology Data Exchange (ETDEWEB)

    Nderitu, Simon K. [Physikalisches Institut, Univ. Bonn (Germany)

    2009-07-01

    Computing in ATLAS is organized in so-called Tier-1 clouds. The Tier-1 provides crucial services for DDM and production, which had been developed and extensively tested in the last years. A further key activity of a Tier-1 is data reprocessing which requires bulk reading of RAW data from tape. It is an I/O intensive activity. Thus an efficient performance of the tape system I/O is very important. Tape reading tests have been done with an aim of optimizing the system. The talk presents the result of the progress made and the current status in line with the expected performance. Also an overview of the current status and progress in the other areas is given.

  10. Numerical Simulations of Turbulent Molecular Clouds Regulated by Reprocessed Radiation Feedback from Nascent Super Star Clusters

    CERN Document Server

    Skinner, M Aaron

    2015-01-01

    Radiation feedback from young star clusters embedded in giant molecular clouds (GMCs) is believed to be important to the control of star formation. For the most massive and dense clouds, including those in which super star clusters (SSCs) are born, pressure from reprocessed radiation exerted on dust grains may disperse a significant portion of the cloud mass back into the interstellar medium (ISM). Using our radiaton hydrodynamics (RHD) code, Hyperion, we conduct a series of numerical simulations to test this idea. Our models follow the evolution of self-gravitating, strongly turbulent clouds in which collapsing regions are replaced by radiating sink particles representing stellar clusters. We evaluate the dependence of the star formation efficiency (SFE) on the size and mass of the cloud and $\\kappa$, the opacity of the gas to infrared (IR) radiation. We find that the single most important parameter determining the evolutionary outcome is $\\kappa$, with $\\kappa \\gtrsim 15 \\text{ cm}^2 \\text{ g}^{-1}$ needed ...

  11. [The reprocessing of medical products: from regulatory polices to operational practices].

    Science.gov (United States)

    Costa, Eliana Auxiliadora Magalhães; Costa, Ediná Alves

    2011-12-01

    The number of technological resources used in health care interventions is growing and continually expanding with the introduction of new products and articles. Problems associated with the reutilization of medical products, both reusable and of single use, affect policies and related technical-operational, economic, political, ethical, legal, and environmental matters. This study aims to contextualize the regulatory systems of medical products, and analyze the subsequent operational implications for Brazilian hospital practices. The article consists of a bibliographic review, carried out without time and language restriction, utilizing the Web of Science, Bireme, Scielo and Lilacs databases, with the support of specific descriptors. This study uses the contextualization of regulatory plans for medical products across the world and in Brazil and the existing condition of standardization of the reprocessing of these products as the assessment sources with which to analyze the operational implications for these practices in Brazilian hospitals.

  12. Management of high-level waste arisen from SNF reprocessing by non-aqueous methods

    Energy Technology Data Exchange (ETDEWEB)

    Lukinykh, A.N.; Bychkov, A.V.; Lavrinovich, Yu.G.; Kormilitsyn, M.V

    2004-07-01

    Composition, properties and outputs of high-active products and waste have been studied after pyro-electrochemical reprocessing of BN-350 and BOR-60 reactor irradiated MOX fuel. The main amount of fission products, actinides and impurities is concentrated in a small volume of solid recycled products - uranium dioxides of two types and high-active waste - phosphate deposit and spent salt electrolyte. The phosphate deposit and electrolyte are subject to the final disposal but uranium dioxides are returned to the cycle after a certain period of storage. Based on the study of waste properties it was concluded that they can be kept in sealed stainless steel containers without treatment for a long time. Both types of waste may be immobilized in phosphate glass or in monazite-type and kosnarite-type (NZP) ceramics to make an additional safety barrier before the final disposal. (authors)

  13. Modeling the dynamics of evaluation: a multilevel neural network implementation of the iterative reprocessing model.

    Science.gov (United States)

    Ehret, Phillip J; Monroe, Brian M; Read, Stephen J

    2015-05-01

    We present a neural network implementation of central components of the iterative reprocessing (IR) model. The IR model argues that the evaluation of social stimuli (attitudes, stereotypes) is the result of the IR of stimuli in a hierarchy of neural systems: The evaluation of social stimuli develops and changes over processing. The network has a multilevel, bidirectional feedback evaluation system that integrates initial perceptual processing and later developing semantic processing. The network processes stimuli (e.g., an individual's appearance) over repeated iterations, with increasingly higher levels of semantic processing over time. As a result, the network's evaluations of stimuli evolve. We discuss the implications of the network for a number of different issues involved in attitudes and social evaluation. The success of the network supports the IR model framework and provides new insights into attitude theory.

  14. Science and pseudoscience in the development of eye movement desensitization and reprocessing: implications for clinical psychology.

    Science.gov (United States)

    Herbert, J D; Lilienfeld, S O; Lohr, J M; Montgomery, R W; O'Donohue, W T; Rosen, G M; Tolin, D F

    2000-11-01

    The enormous popularity recently achieved by Eye Movement Desensitization and Reprocessing (EMDR) as a treatment for anxiety disorders appears to have greatly outstripped the evidence for its efficacy from controlled research studies. The disparity raises disturbing questions concerning EMDR's aggressive commercial promotion and its rapid acceptance among practitioners. In this article, we: (1) summarize the evidence concerning EMDR's efficacy; (2) describe the dissemination and promotion of EMDR; (3) delineate the features of pseudoscience and explicate their relevance to EMDR; (4) describe the pseudoscientific marketing practices used to promote EMDR; (5) analyze factors contributing to the acceptance of EMDR by professional psychologists; and (6) discuss practical considerations for professional psychologists regarding the adoption of EMDR into professional practice. We argue that EMDR provides an excellent vehicle for illustrating the differences between scientific and pseudoscientific therapeutic techniques. Such distinctions are of critical importance for clinical psychologists who intend to base their practice on the best available research.

  15. The Role and Reprocessing of Attitudes in Fostering Employee Work Happiness: An Intervention Study

    Science.gov (United States)

    Williams, Paige; Kern, Margaret L.; Waters, Lea

    2017-01-01

    This intervention study examines the iterative reprocessing of explicit and implicit attitudes as the process underlying associations between positive employee attitudes (PsyCap), perception of positive organization culture (organizational virtuousness, OV), and work happiness. Using a quasi-experimental design, a group of school staff (N = 69) completed surveys at three time points. After the first assessment, the treatment group (n = 51) completed a positive psychology training intervention. Results suggest that employee PsyCap, OV, and work happiness are associated with one another through both implicit and explicit attitudes. Further, the Iterative-Reprocessing Model of attitudes (IRM) provides some insights into the processes underlying these associations. By examining the role and processes through which explicit and implicit attitudes relate to wellbeing at work, the study integrates theories on attitudes, positive organizational scholarship, positive organizational behavior and positive education. It is one of the first studies to apply the theory of the IRM to explain associations amongst PsyCap, OV and work happiness, and to test the IRM theory in a field-based setting. In applying attitude theory to wellbeing research, this study provides insights to mechanisms underlying workplace wellbeing that have not been previously examined and in doing so responds to calls for researchers to learn more about the mechanisms underlying wellbeing interventions. Further, it highlights the need to understand subconscious processes in future wellbeing research and to include implicit measures in positive psychology interventions measurement programs. Practically, this research calls attention to the importance of developing both the positive attitudes of employees and the organizational culture in developing employee work happiness. PMID:28154546

  16. Analysis of the Reuse of Uranium Recovered from the Reprocessing of Commercial LWR Spent Fuel

    Energy Technology Data Exchange (ETDEWEB)

    DelCul, Guillermo Daniel [ORNL; Trowbridge, Lee D [ORNL; Renier, John-Paul [ORNL; Ellis, Ronald James [ORNL; Williams, Kent Alan [ORNL; Spencer, Barry B [ORNL; Collins, Emory D [ORNL

    2009-02-01

    This report provides an analysis of the factors involved in the reuse of uranium recovered from commercial light-water-reactor (LWR) spent fuels (1) by reenrichment and recycling as fuel to LWRs and/or (2) by recycling directly as fuel to heavy-water-reactors (HWRs), such as the CANDU (registered trade name for the Canadian Deuterium Uranium Reactor). Reuse is an attractive alternative to the current Advanced Fuel Cycle Initiative (AFCI) Global Nuclear Energy Partnership (GNEP) baseline plan, which stores the reprocessed uranium (RU) for an uncertain future or attempts to dispose of it as 'greater-than-Class C' waste. Considering that the open fuel cycle currently deployed in the United States already creates a huge excess quantity of depleted uranium, the closed fuel cycle should enable the recycle of the major components of spent fuel, such as the uranium and the hazardous, long-lived transuranic (TRU) actinides, as well as the managed disposal of fission product wastes. Compared with the GNEP baseline scenario, the reuse of RU in the uranium fuel cycle has a number of potential advantages: (1) avoidance of purchase costs of 11-20% of the natural uranium feed; (2) avoidance of disposal costs for a large majority of the volume of spent fuel that is reprocessed; (3) avoidance of disposal costs for a portion of the depleted uranium from the enrichment step; (4) depending on the {sup 235}U assay of the RU, possible avoidance of separative work costs; and (5) a significant increase in the production of {sup 238}Pu due to the presence of {sup 236}U, which benefits somewhat the transmutation value of the plutonium and also provides some proliferation resistance.

  17. Multivariate analysis of GPS position time series of JPL second reprocessing campaign

    Science.gov (United States)

    Amiri-Simkooei, A. R.; Mohammadloo, T. H.; Argus, D. F.

    2017-01-01

    The second reprocessing of all GPS data gathered by the Analysis Centers of IGS was conducted in late 2013 using the latest models and methodologies. Improved models of antenna phase center variations and solar radiation pressure in JPL's reanalysis are expected to significantly reduce errors. In an earlier work, JPL estimates of position time series, termed first reprocessing campaign, were examined in terms of their spatial and temporal correlation, power spectra, and draconitic signal. Similar analyses are applied to GPS time series at 89 and 66 sites of the second reanalysis with the time span of 7 and 21 years, respectively, to study possible improvements. Our results indicate that the spatial correlations are reduced on average by a factor of 1.25. While the white and flicker noise amplitudes for all components are reduced by 29-56 %, the random walk amplitude is enlarged. The white, flicker, and random walk noise amount to rate errors of, respectively, 0.01, 0.12, and 0.09 mm/yr in the horizontal and 0.04, 0.41 and 0.3 mm/yr in the vertical. Signals reported previously, such as those with periods of 13.63, 14.76, 5.5, and 351.4 / n for n=1,2,ldots,8 days, are identified in multivariate spectra of both data sets. The oscillation of the draconitic signal is reduced by factors of 1.87, 1.87, and 1.68 in the east, north and up components, respectively. Two other signals with Chandlerian period and a period of 380 days can also be detected.

  18. Reprocessing of {sup 10}B-contaminated {sup 10}Be AMS targets

    Energy Technology Data Exchange (ETDEWEB)

    Simon, K.J., E-mail: ksz@ansto.gov.au [Australian Nuclear Science and Technology Organisation, Locked Bag 2001, Kirrawee NSW 2232 (Australia); Pedro, J.B. [Institute of Marine and Antarctic Studies, Private Bag 129, Hobart TAS 7001 (Australia); Antarctic Climate and Ecosystems Cooperative Research Centre, Private Bag 80, Hobart TAS 7001 (Australia); Smith, A.M.; Child, D.P.; Fink, D. [Australian Nuclear Science and Technology Organisation, Locked Bag 2001, Kirrawee NSW 2232 (Australia)

    2013-01-15

    {sup 10}Be accelerator mass spectrometry (AMS) is an increasingly important tool in studies ranging from exposure age dating and palaeo-geomagnetism to the impact of solar variability on the Earth's climate. High levels of boron in BeO AMS targets can adversely impact the quality of {sup 10}Be measurements through interference from the isobar {sup 10}B. Numerous methods in chemical sample preparation and AMS measurement have been employed in order to reduce the impact of excessive boron rates. We present details of a method developed to chemically reprocess a set of forty boron-contaminated BeO targets derived from modern Antarctic ice. Previously, the excessive boron levels in these samples, as measured in an argon-filled absorber cell preceding the ionisation detector, had precluded routine AMS measurement. The procedure involved removing the BeO + Nb mixture from the target holders and dissolving the BeO in hot concentrated H{sub 2}SO{sub 4}. The solution was then heated with HF to remove the boron as volatile BF{sub 3} before re-precipitating as Be(OH){sub 2} and calcining to BeO. This was again mixed with niobium and pressed into fresh target holders. Following reprocessing, the samples gave boron rates reduced by 10-100 Multiplication-Sign , which were sufficiently low and similar to previous successful batches of ice core, snow and associated blank samples, thus allowing a successful {sup 10}Be measurement in the absence of any boron correction. Overall recovery of the BeO for this process averaged 40%. Extensive testing of relevant processing equipment and reagents failed to determine the source of the boron. As a precautionary measure, a similar H{sub 2}SO{sub 4} + HF step has been subsequently added to the standard ice processing method.

  19. The Role and Reprocessing of Attitudes in Fostering Employee Work Happiness: An Intervention Study.

    Science.gov (United States)

    Williams, Paige; Kern, Margaret L; Waters, Lea

    2017-01-01

    This intervention study examines the iterative reprocessing of explicit and implicit attitudes as the process underlying associations between positive employee attitudes (PsyCap), perception of positive organization culture (organizational virtuousness, OV), and work happiness. Using a quasi-experimental design, a group of school staff (N = 69) completed surveys at three time points. After the first assessment, the treatment group (n = 51) completed a positive psychology training intervention. Results suggest that employee PsyCap, OV, and work happiness are associated with one another through both implicit and explicit attitudes. Further, the Iterative-Reprocessing Model of attitudes (IRM) provides some insights into the processes underlying these associations. By examining the role and processes through which explicit and implicit attitudes relate to wellbeing at work, the study integrates theories on attitudes, positive organizational scholarship, positive organizational behavior and positive education. It is one of the first studies to apply the theory of the IRM to explain associations amongst PsyCap, OV and work happiness, and to test the IRM theory in a field-based setting. In applying attitude theory to wellbeing research, this study provides insights to mechanisms underlying workplace wellbeing that have not been previously examined and in doing so responds to calls for researchers to learn more about the mechanisms underlying wellbeing interventions. Further, it highlights the need to understand subconscious processes in future wellbeing research and to include implicit measures in positive psychology interventions measurement programs. Practically, this research calls attention to the importance of developing both the positive attitudes of employees and the organizational culture in developing employee work happiness.

  20. Using OPUS to Perform HST On-The-Fly Re-Processing (OTFR)

    Science.gov (United States)

    Swam, M. S.; Hopkins, E.; Swade, D. A.

    The Hubble Space Telescope (HST) OPUS implementation of On-The-Fly Calibration (OTFC) processing currently provides the benefit of applying the most current calibration algorithms, reference files, and repairs of errant header keyword values (aperture, shutter, etc.) to Level-1b datasets as they are retrieved from the HST archive. While OTFC has performed well, a number of concerns about maintenance and flexibility have resulted in the evolution towards an On-The-Fly Re-Processing (OTFR) System. Also based on the OPUS pipeline architecture, OTFR carries further the notion of creating products for archive users at the time of their request, by completely regenerating calibrated (Level-2) data products for an exposure from the base telemetry files sent from the HST (Level-1a data). By starting processing at this earlier state, and taking advantage of the changes to the data processing software that are made as that software matures, improved, more consistent calibrated (Level-2) data products are produced. Use of OPUS distributed multi-processing, the relatively small size of HST datasets, and the efficiency of the data processing and calibration software results in a very small impact on the overall time it takes to complete an archive retrieval. There could be an impact to archive research, however, since the archive catalog meta-data will not completely reflect the reprocessed products as they would be delivered to the archive user. This problem will be addressed by performing catalog updates for any major discrepancies. This paper will describe the concerns raised about OTFC, the design of the OTFR pipeline system, and the benefits of using the OPUS architecture in this design.

  1. NOISE CHARACTERISTIC AND SEASONAL SIGNALS IN THE RE-PROCESSED EUREF PERMANENT NETWORK COORDINATE TIME SERIES

    Science.gov (United States)

    Kenyeres, A.; Williams, S. D.; Figurski, M.; van Dam, T. M.; Szafranek, K.

    2009-12-01

    Previous analyses of periodic signals present in continuous GPS time series showed that the amplitude and phase of the derived seasonal term mostly disagree with surface mass loading models. The CGPS results appeared to over-estimate the amplitude of the seasonal term and the estimated amplitudes and/or phases were poorly coherent with the loading models, especially at sites close to coastal areas. The studies concluded that the GPS results are distorted by analysis artifacts (such as ocean tide loading, aliasing, and antenna phase centre variation models), monument thermal effects, and multipath. In addition, the actual CGPS time series were inhomogeneous in terms of processing strategy, applied models and reference frame alignment. With the introduction of absolute antenna phase centre variation models an effort, within the EUREF Permanent Network, was initiated to produce a complete GPS re-analysis from global to local levels. A test re-processing of all EPN observations from 1996 to 2007 has already been completed by the Military University of Technology (MUT), Warsaw, Poland and cumulative EPN solutions, from the daily SINEX files, have been created using the CATREF software. We used a combination of Weighted Least Squares, Maximum Likelihood Estimation (MLE), Empirical Orthogonal Functions (EOF’s) and Wavelets to analyze the data for their spatial and temporal noise characteristics and investigate the periodic signals. We find that the noise levels in the re-processed daily solutions is reduced compared to past solutions, but the noise spectra is still represented by a combination of flicker noise and white noise. The amplitudes of the seasonal term have generally decreased and the spatial distribution of the phase lag appears to be more uniform. Comparisons of the estimated annual variations with combined loading models (NCEP + LaD - World - Fraser + ECCO) and the vertical displacement model of the GRACE R4 gravity fields show an improved agreement

  2. Multivariate analysis of GPS position time series of JPL second reprocessing campaign

    Science.gov (United States)

    Amiri-Simkooei, A. R.; Mohammadloo, T. H.; Argus, D. F.

    2017-06-01

    The second reprocessing of all GPS data gathered by the Analysis Centers of IGS was conducted in late 2013 using the latest models and methodologies. Improved models of antenna phase center variations and solar radiation pressure in JPL's reanalysis are expected to significantly reduce errors. In an earlier work, JPL estimates of position time series, termed first reprocessing campaign, were examined in terms of their spatial and temporal correlation, power spectra, and draconitic signal. Similar analyses are applied to GPS time series at 89 and 66 sites of the second reanalysis with the time span of 7 and 21 years, respectively, to study possible improvements. Our results indicate that the spatial correlations are reduced on average by a factor of 1.25. While the white and flicker noise amplitudes for all components are reduced by 29-56 %, the random walk amplitude is enlarged. The white, flicker, and random walk noise amount to rate errors of, respectively, 0.01, 0.12, and 0.09 mm/yr in the horizontal and 0.04, 0.41 and 0.3 mm/yr in the vertical. Signals reported previously, such as those with periods of 13.63, 14.76, 5.5, and 351.4 / n for n=1,2,{\\ldots },8 days, are identified in multivariate spectra of both data sets. The oscillation of the draconitic signal is reduced by factors of 1.87, 1.87, and 1.68 in the east, north and up components, respectively. Two other signals with Chandlerian period and a period of 380 days can also be detected.

  3. Correlation of radioactive waste treatment costs and the environmental impact of waste effluents in the nuclear fuel cycle: reprocessing of high-temperature gas-cooled reactor fuel containing U-233 and thorium

    Energy Technology Data Exchange (ETDEWEB)

    Davis, W. Jr.; Blanco, R.E.; Finney, B.C.; Hill, G.S.; Moore, R.E.; Witherspoon, J.P.

    1976-05-01

    A cost/benefit study was made to determine the cost and effectiveness of various radioactive waste (radwaste) treatment systems for decreasing the release of radioactive materials from a model high-temperature gas-cooled reactor (HTGR) fuel reprocessing plant and to determine the radiological impact (dose commitment) of the released materials on the environment. The study is designed to assist the U. S. Nuclear Regulatory Commission in defining the term as low as reasonably achievable as it applies to this nuclear facility. The base case is representative of conceptual, developing technology of head-end graphite-burning operations and of extensions of solvent-extraction technology of current designs for light-water-reactor (LWR) fuel reprocessing plants. The model plant has an annual capacity of 450 metric tons of heavy metal (MTHM, where heavy metal is uranium plus thorium), as charged to about fifty 1000-MW(e) HTGRs. Additional radwaste treatment systems are added to the base-case plant in a series of case studies to decrease the amounts of radioactive materials released and to reduce the radiological dose commitment to the population in the surrounding area. The capital and annual costs for the added waste treatment operations and the corresponding reductions in dose commitments are calculated for each case. In the final analysis, the cost/benefit of each case, calculated as additional cost of radwaste system divided by the reduction in dose commitment, is tabulated or the dose commitment is plotted with cost as the variable. The status of each of the radwaste treatment methods used in the case studies is discussed.

  4. Influence of reprocessing on fibre length distribution, tensile strength and impact strength of injection moulded cellulose fibre-reinforced polylactide (PLA composites

    Directory of Open Access Journals (Sweden)

    N. Graupner

    2016-08-01

    Full Text Available The present study focuses on the reprocessing behaviour of recycled injection moulded polylactide (PLA composites. The composites are reinforced with regenerated cellulose fibres (lyocell of variable fineness and a fibre mass content of 30%. They were reprocessed up to three times. The influence of reprocessing on the fibre length distribution and the resulting composite mechanical properties (tensile and impact strength was analysed. While the first reprocessing cycle does not affect the mechanical characteristics of the neat PLA matrix, the strength of the composites decreases significantly due to a decreasing fibre aspect ratio. It was shown that fibres having a larger cross-sectional area display a lower aspect ratio than finer fibres, after reprocessing. This phenomenon leads to a larger decrease in tensile strength of composites reinforced with coarser fibres when compared to composites reinforced with finer fibres. A comparison of virgin composites and threefold reprocessed composites with a similar fibre length distribution resulted in a significantly higher tensile strength compared to the virgin sample. This result leads to the conclusion that not only the fibre length is drastically reduced by reprocessing but also that the fibres and the matrix were damaged.

  5. Simulation of atmospheric krypton-85 transport to assess the detectability of clandestine nuclear reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Ross, Jens Ole

    2010-02-02

    The radioactive noble gas krypton-85 is released into the atmosphere during reprocessing of spent nuclear fuel or irradiated breeding targets. This is a necessary step for plutonium separation. Therefore the {sup 85}Kr signature of reprocessing could possibly be used for the detection of undeclared nuclear facilities producing nuclear weaponusable material. The {sup 85}Kr content of the atmosphere has grown over the last decades as the emissions from military and civilian nuclear industry could not be compensated by the decay with a half-life of 10.76 years. In this study, the global {sup 85}Kr background distribution due to emissions of known reprocessing facilities for the period from 1971 until 2006 was simulated using the atmospheric general circulation model ECHAM5 applying the newest available annual emission data. The convective tracer transport scheme and the operator splitting for the physical calculations in the model were modified in order to guarantee physically correct results for tracer point sources, in particular non negative concentrations. An on-line routine controlling the {sup 85}Kr -budget in the model enforced exact mass conservation. The results of the simulation were evaluated by extensive comparison with measurements performed by the German Federal Office for Radiation Protection with very good agreement at most observation sites except those in the direct vicinity of {sup 85}Kr sources. Of particular interest for the {sup 85}Kr detection potential was the variability of {sup 85}Kr background concentrations which was evaluated for the first time in a global model. In addition, the interhemispheric transport as simulated by ECHAM5 was analyzed using a two-box model providing a mean exchange time of τ {sub ex} = 10.5 months. The analysis of τ{sub ex} over simulated 35 years indicates that in years with strong South Asian or African Monsoon the interhemispheric transport is faster during the monsoon season. A correlation analysis of

  6. Fuel salt reprocessing influence on the MSFR behavior and on its associated reprocessing unit; Influence du retraitement physico-chimique du sel combustible sur le comportement du MSFR et sur le dimensionnement de son unite de retraitement

    Energy Technology Data Exchange (ETDEWEB)

    Doligez, X.

    2010-10-15

    In order to face with the growing of the energy demand, the nuclear industry has to reach the fourth generation technology. Among those concept, molten salt reactor, and especially the fast neutron spectrum configuration, seems very promising: indeed breeding is achievable while the feedback coefficient are still negative. However, the reprocessing salt scheme is not totally set down yet. A lot of uncertainties remain on chemical properties of the salt. Thanks to numerical simulation we studied the behavior of the molten Salt Fast Reactor coupled to a nominal reprocessing unit. We are now able to determine heat transfer and radiation in each elementary step of the unit and, by this way determine those that need special study for radioprotection. We also studied which elements are fundamental to extract for the reactor operation. Finally, we present a sensibility analysis of the chemical uncertainties to few relevant properties of the reactor behavior. (author)

  7. Waste-Incidental-to-Reprocessing Evaluation for the West Valley Demonstration Project Vitrification Melter - 12167

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, Jim; Kurasch, David [consultant - USA (United States); Sullivan, Dan; Crandall, Thomas [U.S. Department of Energy (United States)

    2012-07-01

    The Department of Energy (DOE) has determined that the vitrification melter used in the West Valley Demonstration Project can be disposed of as low-level waste (LLW) after completion of a waste-incidental-to-reprocessing evaluation performed in accordance with the evaluation process of DOE Manual 435.1-1, Radioactive Waste Management Manual. The vitrification melter - which consists of a ceramic lined, electrically heated box structure - was operated for more than 5 years melting and fusing high-level waste (HLW) slurry and glass formers and pouring the molten glass into 275 stainless steel canisters. Prior to shutdown, the melter was decontaminated by processing low-activity decontamination flush solutions and by extracting molten glass from the melter cavity. Because it could not be completely emptied, residual radioactivity conservatively estimated at approximately 170 TBq (4,600 Ci) remained in the vitrification melter. To establish whether the melter was incidental to reprocessing, DOE prepared an evaluation to demonstrate that the vitrification melter: (1) had been processed to remove key radionuclides to the maximum extent technically and economically practical; (2) would be managed to meet safety requirements comparable to the performance objectives for LLW established by the Nuclear Regulatory Commission (NRC); and (3) would be managed by DOE in accordance with DOE's requirements for LLW after it had been incorporated in a solid physical form with radionuclide concentrations that do not exceed the NRC concentration limits for Class C LLW. DOE consulted with the NRC on the draft evaluation and gave other stakeholders an opportunity to submit comments before the determination was made. The NRC submitted a request for additional information in connection with staff review of the draft evaluation; DOE provided the additional information and made improvements to the evaluation, which was issued in January 2012. DOE considered the NRC Technical Evaluation

  8. NASADEM Overview and First Results: Shuttle Radar Topography Mission (SRTM) Reprocessing and Improvements

    Science.gov (United States)

    Buckley, S.; Agram, P. S.; Belz, J. E.; Crippen, R. E.; Gurrola, E. M.; Hensley, S.; Kobrick, M.; Lavalle, M.; Martin, J. M.; Neumann, M.; Nguyen, Q.; Rosen, P. A.; Shimada, J.; Simard, M.; Tung, W.

    2015-12-01

    NASADEM is a significant modernization of SRTM digital elevation model (DEM) data supported by the NASA MEaSUREs program. We are reprocessing the raw radar signal data using improved algorithms and incorporating ICESat and ASTER-derived DEM data unavailable during the original processing. The NASADEM products will be freely-available through the Land Processes Distributed Active Archive Center (LPDAAC) at 1-arcsecond spacing. The most significant processing improvements involve void reduction through improved phase unwrapping and using ICESat data for control. The updated unwrapping strategy now includes the use of SNAPHU for data processing patches where the unwrapped coverage from the original residue-based unwrapper falls below a coverage threshold. In North America continental processing, first experiments show the strip void area is reduced by more than 50% and the number of strip void patches is reduced by 40%. Patch boundary voids are mitigated by reprocessing with a different starting burst and merging the unwrapping results. We also updated a low-resolution elevation database to aid with unwrapping bootstrapping, retaining isolated component of unwrapped phase, and assessing the quality of the strip DEMs. We introduce a height ripple error correction to reduce artifacts in the strip elevation data. These ripples are a few meters in size with along-track spatial scales of tens of kilometers and are due to uncompensated mast motion most pronounced after Shuttle roll angle adjustment maneuvers. We developed an along-track filter utilizing differences between the SRTM heights and ICESat lidar elevation data. For a test using all data over North America, the algorithm reduced the ICESat-SRTM bias from 80 cm to 3 cm and the RMS from 5m to 4m. After merging and regridding the SRTM strip DEMs into 1x1-degree tiles, remaining voids are primarily filled with the ASTER-derived Global DEM. We use a Delta Surface Fill method to rubbersheet fill data across the void for

  9. Reprocessing the Historical Satellite Passive Microwave Record at Enhanced Spatial Resolutions using Image Reconstruction

    Science.gov (United States)

    Hardman, M.; Brodzik, M. J.; Long, D. G.; Paget, A. C.; Armstrong, R. L.

    2015-12-01

    Beginning in 1978, the satellite passive microwave data record has been a mainstay of remote sensing of the cryosphere, providing twice-daily, near-global spatial coverage for monitoring changes in hydrologic and cryospheric parameters that include precipitation, soil moisture, surface water, vegetation, snow water equivalent, sea ice concentration and sea ice motion. Currently available global gridded passive microwave data sets serve a diverse community of hundreds of data users, but do not meet many requirements of modern Earth System Data Records (ESDRs) or Climate Data Records (CDRs), most notably in the areas of intersensor calibration, quality-control, provenance and consistent processing methods. The original gridding techniques were relatively primitive and were produced on 25 km grids using the original EASE-Grid definition that is not easily accommodated in modern software packages. Further, since the first Level 3 data sets were produced, the Level 2 passive microwave data on which they were based have been reprocessed as Fundamental CDRs (FCDRs) with improved calibration and documentation. We are funded by NASA MEaSUREs to reprocess the historical gridded data sets as EASE-Grid 2.0 ESDRs, using the most mature available Level 2 satellite passive microwave (SMMR, SSM/I-SSMIS, AMSR-E) records from 1978 to the present. We have produced prototype data from SSM/I and AMSR-E for the year 2003, for review and feedback from our Early Adopter user community. The prototype data set includes conventional, low-resolution ("drop-in-the-bucket" 25 km) grids and enhanced-resolution grids derived from the two candidate image reconstruction techniques we are evaluating: 1) Backus-Gilbert (BG) interpolation and 2) a radiometer version of Scatterometer Image Reconstruction (SIR). We summarize our temporal subsetting technique, algorithm tuning parameters and computational costs, and include sample SSM/I images at enhanced resolutions of up to 3 km. We are actively

  10. The behaviour of ¹²⁹I released from nuclear fuel reprocessing factories in the North Atlantic Ocean and transport to the Arctic assessed from numerical modelling.

    Science.gov (United States)

    Villa, M; López-Gutiérrez, J M; Suh, Kyung-Suk; Min, Byung-Il; Periáñez, R

    2015-01-15

    A quantitative evaluation of the fate of (129)I, released from the European reprocessing plants of Sellafield (UK) and La Hague (France), has been made by means of a Lagrangian dispersion model. Transport of radionuclides to the Arctic Ocean has been determined. Thus, 5.1 and 16.6 TBq of (129)I have been introduced in the Arctic from Sellafield and La Hague respectively from 1966 to 2012. These figures represent, respectively, 48% and 55% of the cumulative discharge to that time. Inventories in the North Atlantic, including shelf seas, are 4.4 and 13.8 TBq coming from Sellafield and La Hague respectively. These figures are significantly different from previous estimations based on field data. The distribution of these inventories among several shelf seas and regions has been evaluated as well. Mean ages of tracers have been finally obtained, making use of the age-averaging hypothesis. It has been found that mean ages for Sellafield releases are about 3.5 year larger than for La Hague releases.

  11. Proof of concept simulations of the Multi-Isotope Process monitor: An online, nondestructive, near-real-time safeguards monitor for nuclear fuel reprocessing facilities

    Science.gov (United States)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard N.; Schwantes, Jon M.

    2011-02-01

    The International Atomic Energy Agency will require the development of advanced technologies to effectively safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of nondestructive, near-real-time, autonomous process monitoring. This paper describes recent results from model simulations designed to test the Multi-Isotope Process (MIP) monitor, a novel addition to a safeguards system for reprocessing facilities. The MIP monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in near-real-time. Three computer models including ORIGEN-ARP, AMUSE, and SYNTH were used in series to predict spent nuclear fuel composition, estimate element partitioning during separation, and simulate spectra from product and raffinate streams using a variety of gamma detectors, respectively. Simulations were generated for fuel with various irradiation histories and under a variety of plant operating conditions. Principal component analysis was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup, and cooling time. Hierarchical cluster analysis and partial least squares (PLS) were also used in the analysis. The MIP monitor was found to be sensitive to induced variations of several operating parameters including distinguishing ±2.5% variation from normal process acid concentrations. The ability of PLS to predict burnup levels from simulated spectra was also demonstrated to be within 3.5% of measured values.

  12. 65 Years of Reprocessed GLDAS Version 2.0 Data and Their Exploration Using the NASA GES DISC Giovanni

    Science.gov (United States)

    Rui, Hualan; Vollmer, B.; Teng, W.; Beaudoing, H.; Rodell, M.; Silberstein, D.

    2015-01-01

    GLDAS-2.0 data have been reprocessed with updated Princeton meteorological forcing data within the Land Information System (LIS) Version 7, and temporal coverage have been extended to 1948-2012.Global Land Data Assimilation System Version 2 (GLDAS-2) has two components: GLDAS-2.0: entirely forced with the Princeton meteorological forcing data GLDAS-2.1: forced with atmospheric analysis and observation-based data after 2001In order to create more climatologically consistent data sets, NASA GSFC's Hydrological Sciences Laboratory (HSL) has recently reprocessed the GLDAS-2.0, by using updated Princeton meteorological forcing data within the LIS Version 7.GLDAS-2.0 data and data services are provided at NASA GES DISC Hydrology Data and Information Services Center (HDISC), in collaboration with HSL.

  13. HUPO Brain Proteome Project: summary of the pilot phase and introduction of a comprehensive data reprocessing strategy.

    Science.gov (United States)

    Hamacher, Michael; Apweiler, Rolf; Arnold, Georg; Becker, Albert; Blüggel, Martin; Carrette, Odile; Colvis, Christine; Dunn, Michael J; Fröhlich, Thomas; Fountoulakis, Michael; van Hall, André; Herberg, Friedrich; Ji, Jianguo; Ji, Juango; Kretzschmar, Hans; Lewczuk, Piotr; Lubec, Gert; Marcus, Katrin; Martens, Lennart; Palacios Bustamante, Nadine; Park, Young Mok; Pennington, Stephen R; Robben, Johan; Stühler, Kai; Reidegeld, Kai A; Riederer, Peter; Rossier, Jean; Sanchez, Jean-Charles; Schrader, Michael; Stephan, Christian; Tagle, Danilo; Thiele, Herbert; Wang, Jing; Wiltfang, Jens; Yoo, Jong Shin; Zhang, Chenggang; Klose, Joachim; Meyer, Helmut E

    2006-09-01

    The Human Proteome Organisation (HUPO) initiated several projects focusing on the proteome analysis of distinct human organs. The Brain Proteome Project (BPP) is the initiative dedicated to the brain, its development and correlated diseases. Two pilot studies have been performed aiming at the comparison of techniques, laboratories and approaches. With the help of the results gained, objective data submission, storage and reprocessing workflow have been established. The biological relevance of the data will be drawn from the inter-laboratory comparisons as well as from the re-calculation of all data sets submitted by the different groups. In the following, results of the single groups as well as the centralised reprocessing effort will be summarised and compared, showing the added value of this concerted work.

  14. Costs of head-end incineration with respect to Kr separation in the reprocessing of HTR fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Barnert-Wiemer, H.; Boehnert, R.

    1976-07-15

    The C-incinerations and the Kr-separations during head-end incineration in the reprocessing of HTR fuel elements are described. The costs for constructing an operating a head-end incineration of reprocessing capacities with 5,000 to 50,000 MW(e)-HTR power have been determined. The cost estimates are divided into investment and operating costs, further after the fraction of the N/sub 2/-content in the incineration exhaust gas, which strongly affects costs. It appears that, in the case of Kr-separation from the incineration exhaust gas, the investment costs as well as the operating costs of the head-end for N/sub 2/-containing exhaust gas are considerably greater than those for gas without N/sub 2/. The C-incineration of the graphite of the HTR fuel elements should therefore only be performed with influx gas that is free of N/sub 2/.

  15. Global Daily Sea Ice Concentration Reprocessing Data Set for 1978-2007 from the EUMETSAT Ocean and Sea Ice Satellite Application Facility (NCEI Accession 0068294)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data constitute the reprocessed sea ice concentration data set from the EUMETSAT Ocean and Sea Ice Satellite Application Facility (OSI SAF), covering the...

  16. Comparison of GPS tropospheric delays derived from two consecutive EPN reprocessing campaigns from the point of view of climate monitoring

    Science.gov (United States)

    Baldysz, Zofia; Nykiel, Grzegorz; Araszkiewicz, Andrzej; Figurski, Mariusz; Szafranek, Karolina

    2016-09-01

    The main purpose of this research was to acquire information about consistency of ZTD (zenith total delay) linear trends and seasonal components between two consecutive GPS reprocessing campaigns. The analysis concerned two sets of the ZTD time series which were estimated during EUREF (Reference Frame Sub-Commission for Europe) EPN (Permanent Network) reprocessing campaigns according to 2008 and 2015 MUT AC (Military University of Technology Analysis Centre) scenarios. Firstly, Lomb-Scargle periodograms were generated for 57 EPN stations to obtain a characterisation of oscillations occurring in the ZTD time series. Then, the values of seasonal components and linear trends were estimated using the LSE (least squares estimation) approach. The Mann-Kendall trend test was also carried out to verify the presence of linear long-term ZTD changes. Finally, differences in seasonal signals and linear trends between these two data sets were investigated. All these analyses were conducted for the ZTD time series of two lengths: a shortened 16-year series and a full 18-year one. In the case of spectral analysis, amplitudes of the annual and semi-annual periods were almost exactly the same for both reprocessing campaigns. Exceptions were found for only a few stations and they did not exceed 1 mm. The estimated trends were also similar. However, for the reprocessing performed in 2008, the trends values were usually higher. In general, shortening of the analysed time period by 2 years resulted in a decrease of the linear trends values of about 0.07 mm yr-1. This was confirmed by analyses based on two data sets.

  17. 65 Years of Reprocessed GLDAS Version 2.0 Data and Their Exploration Using the NASA GES DISC Giovanni

    Science.gov (United States)

    Rui, H.; Vollmer, B.; Teng, W. L.; Beaudoing, H. K.; Rodell, M.; Silberstein, D. S.

    2015-12-01

    Global Land Data Assimilation System Version 2 (GLDAS-2) has two components: (1) GLDAS-2.0, entirely forced with the Princeton meteorological forcing data and (2) GLDAS-2.1, forced with a combination of model and observation-based data sets. GLDAS-2.0 data from the Noah model have been reprocessed in July 2015 with updated Princeton forcing data and upgraded Land Information System (LIS) software. The temporal coverage of GLDAS 2.0 is extended to 1948 ~ 2012. The reprocessed GLDAS-2.0 data are archived at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), in self-describing and machine-independent NetCDF format, and can be accessed via HTTP for direct download, OPeNDAP for parameter and spatial subsetting, time aggregation, and format conversion, and Giovanni - Interactive Visualization and Analysis System. The OPeNDAP subsetting is also integrated into Simple Subset Wizard (SSW) for better User Interface and better downloading capability. This presentation describes the main characteristics of GLDAS data, the major improvements of the reprocessed data, and the access to the data. To further facilitate their use, reprocessed GLDAS-2.0 data are integrated into Giovanni, where the data can be easily explored with 17 visualization types, such as Lat-Lon Map and Animation, Time Series, Scatter Plot, and Histogram. This presentation also showcases the main climatology characteristics of 65 years of GLDAS, derived with Giovanni's new capabilities in computing climatology for user-defined time range and visualizing in Lat-Lon Map and Time Series. GLDAS-2.1 is analogous to and will soon replace GLDAS Version 1 (GLDAS-1), covering the time period from 2001 (or 2000 for the 0.25 degree data) to the present, with about a one-month latency. The data are also in NetCDF format and can be accessed via HTTP, OPeNDAP, and Giovanni.

  18. Muon reconstruction efficiency in reprocessed 2010 LHC proton-proton collision data recorded with the ATLAS detector

    CERN Document Server

    The ATLAS collaboration

    2011-01-01

    This note presents measurements of the muon reconstruction and isolation efficiencies based on an analysis of Z->μ+μ- decays in 40 pb-1 of sqrt(s)=7 TeV proton-proton collision data recorded with the ATLAS detector in 2010. The data entering the analysis were reprocessed with an optimized ATLAS reconstruction software and improved detector calibration and alignment constants.

  19. Dissociation predicts treatment response in eye-movement desensitization and reprocessing for posttraumatic stress disorder.

    Science.gov (United States)

    Bae, Hwallip; Kim, Daeho; Park, Yong Chon

    2016-01-01

    Using clinical data from a specialized trauma clinic, this study investigated pretreatment clinical factors predicting response to eye-movement desensitization and reprocessing (EMDR) among adult patients diagnosed with posttraumatic stress disorder (PTSD). Participants were evaluated using the Clinician-Administered PTSD Scale (CAPS), the Symptom Checklist-90-Revised, the Beck Depression Inventory, and the Dissociative Experiences Scale before treatment and were reassessed using the CAPS after treatment and at 6-month follow-up. A total of 69 patients underwent an average of 4 sessions of EMDR, and 60 (87%) completed the posttreatment evaluation, including 8 participants who terminated treatment prematurely. Intent-to-treat analysis revealed that 39 (65%) of the 60 patients were classified as responders and 21 (35%) as nonresponders when response was defined as more than a 30% decrease in total CAPS score. The nonresponders had higher levels of dissociation (depersonalization and derealization) and numbing symptoms, but other PTSD symptoms, such as avoidance, hyperarousal, and intrusion, were not significantly different. The number of psychiatric comorbidities was also associated with treatment nonresponse. The final logistic regression model yielded 2 significant variables: dissociation (p < .001) and more than 2 comorbidities compared to none (p < .05). These results indicate that complex symptom patterns in PTSD may predict treatment response and support the inclusion of the dissociative subtype of PTSD in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition.

  20. Eye movement desensitization and reprocessing in addiction continuing care: a phenomenological study of women in recovery.

    Science.gov (United States)

    Marich, Jamie

    2010-09-01

    Traditional models of addiction treatment and relapse prevention fail to consider the role that unresolved trauma plays in an addicted woman's recovery experience. Implementing Eye Movement Desensitization and Reprocessing (EMDR) into the treatment process offers a potential solution to this problem. Ten women (alumnae of an extended-care treatment facility) participated in a semistandardized interview to share their experiences with active addiction, treatment, EMDR therapy, and recovery. With the use of A. P. Giorgi's descriptive phenomenological psychological method for analysis, four major thematic areas emerged from the interview data: the existence of safety as an essential crucible of the EMDR experience, the importance of accessing the emotional core as vital to the recovery experience, the role of perspective shift in lifestyle change, and the use of a combination of factors for successful treatment. All 10 women, to some degree, credited EMDR treatment as a crucial component of their addiction continuing-care processes, especially in helping with emotional core access and perspective shift. Implications emerge from the data on how to best implement EMDR into a comprehensive addiction treatment program.

  1. An integrative model for the neural mechanism of Eye Movement Desensitization and Reprocessing (EMDR

    Directory of Open Access Journals (Sweden)

    Olivier A. Coubard

    2016-04-01

    Full Text Available Since the seminal report by Shapiro that bilateral stimulation induces cognitive and emotional changes, twenty-six years of basic and clinical research have examined the effects of Eye Movement Desensitization and Reprocessing (EMDR in anxiety disorders, particularly in Post-Traumatic Stress Disorder (PTSD. The present article aims at better understanding EMDR neural mechanism. I first review procedural aspects of EMDR protocol and theoretical hypothesis about EMDR effects, and develop the reasons why the scientific community is still divided about EMDR. I then slide from psychology to physiology describing eye movements/emotion interaction from the physiological viewpoint, and introduce theoretical and technical tools used in movement research to re-examine EMDR neural mechanism. Using a recent physiological model for the neuropsychological architecture of motor and cognitive control, the Threshold Interval Modulation with Early Release-Rate of rIse Deviation with Early Release – TIMER-RIDER – model, I explore how attentional control and bilateral stimulation may participate to EMDR effects. These effects may be obtained by two processes acting in parallel: (i activity level enhancement of attentional control component; and (ii bilateral stimulation in any sensorimotor modality, both resulting in lower inhibition enabling dysfunctional information to be processed and anxiety to be reduced. The TIMER-RIDER model offers quantitative predictions about EMDR effects for future research about its underlying physiological mechanisms.

  2. The eye movement desensitization and reprocessing procedure prevents defensive processing in health persuasion.

    Science.gov (United States)

    Dijkstra, Arie; van Asten, Regine

    2014-01-01

    In the present study, the method of eye movement desensitization and reprocessing (EMDR) is studied to understand and prevent defensive reactions with regard to a negatively framed message advocating fruit and vegetable consumption. EMDR has been shown to tax the working memory. Participants from a university sample (n = 124) listened to the persuasive message in a randomized laboratory experiment. In the EMDR condition, they were also instructed to follow with their eyes a dot on the computer screen. The dot constantly moved from one side of the screen to the other in 2 seconds. In addition, a self-affirmation procedure was applied in half of the participants. EMDR led to a significant increase in persuasion, only in recipients in whom the persuasive message could be expected to activate defensive self-regulation (in participants with a moderate health value and in participants with low self-esteem). In those with a moderate health value, EMDR increased persuasion, but only when recipients were not affirmed. In addition, EMDR increased persuasion only in recipients with low self-esteem, not in those with high self-esteem. These results showed that EMDR influenced persuasion and in some way lowered defensive reactions. The similarities and differences in effects of EMDR and self-affirmation further increased our insight into the psychology of defensiveness.

  3. Hemodynamic responses of eye movement desensitization and reprocessing in posttraumatic stress disorder.

    Science.gov (United States)

    Ohtani, Toshiyuki; Ohta ni, Toshiyuki; Matsuo, Koji; Kasai, Kiyoto; Kato, Tadafumi; Kato, Nobumasa

    2009-12-01

    Eye movement desensitization and reprocessing (EMDR) is an effective psychological intervention for posttraumatic stress disorder (PTSD). Trauma-related recall (Recall) with eye movements (EMs) is thought to reduce distress. However, the neural mechanisms underlying this process remain unknown. Thirteen patients with PTSD received EMDR treatment over the course of 2-10 weeks. We assessed the change in hemoglobin concentration in the lateral prefrontal cortex (PFC) during Recall with and without EM using multi-channel near-infrared spectroscopy (NIRS). Clinical diagnosis and improvement were evaluated using the Clinician-Administered PTSD Scale. Recall with EM was associated with a significant decrease in oxygenated hemoglobin concentration ([oxy-Hb]) in the lateral PFC as compared with Recall without EM. Longitudinally, [oxy-Hb] during Recall significantly decreased and the amount of decrease was significantly correlated with clinical improvement when the post-treatment data was compared with that of the pre-treatment. Our results suggest that performing EM during Recall reduces the over-activity of the lateral PFC, which may be part of the biological basis for the efficacy of EMDR in PTSD. NIRS may be a useful tool for objective assessment of psychological intervention in PTSD.

  4. Neurophysiological correlates of eye movement desensitization and reprocessing sessions: preliminary evidence for traumatic memories integration.

    Science.gov (United States)

    Farina, Benedetto; Imperatori, Claudio; Quintiliani, Maria I; Castelli Gattinara, Paola; Onofri, Antonio; Lepore, Marta; Brunetti, Riccardo; Losurdo, Anna; Testani, Elisa; Della Marca, Giacomo

    2015-11-01

    We have investigated the potential role of eye movement desensitization and reprocessing (EMDR) in enhancing the integration of traumatic memories by measuring EEG coherence, power spectra and autonomic variables before (pre-EMDR) and after (post-EMDR) EMDR sessions during the recall of patient's traumatic memory. Thirteen EMDR sessions of six patients with post-traumatic stress disorder were recorded. EEG analyses were conducted by means of the standardized Low Resolution Electric Tomography (sLORETA) software. Power spectra, EEG coherence and heart rate variability (HRV) were compared between pre- and post-EMDR sessions. After EMDR, we observed a significant increase of alpha power in the left inferior temporal gyrus (T = 3.879; P = 0.041) and an increased EEG coherence in beta band between C3 and T5 electrodes (T = 6.358; P EMDR sessions was also observed (pre-EMDR: 6.38 ± 6.83; post-EMDR: 2.46 ± 2.95; U-Test = 45, P = 0.043). Finally, the values of lagged coherence were negatively associated with subjective units of disturbance (r(24) = -0.44, P EMDR leads to an integration of dissociated aspects of traumatic memories and, consequently, a decrease of hyperarousal symptoms [Correction made here after initial publication].

  5. An Integrative Model for the Neural Mechanism of Eye Movement Desensitization and Reprocessing (EMDR).

    Science.gov (United States)

    Coubard, Olivier A

    2016-01-01

    Since the seminal report by Shapiro that bilateral stimulation induces cognitive and emotional changes, 26 years of basic and clinical research have examined the effects of Eye Movement Desensitization and Reprocessing (EMDR) in anxiety disorders, particularly in post-traumatic stress disorder (PTSD). The present article aims at better understanding EMDR neural mechanism. I first review procedural aspects of EMDR protocol and theoretical hypothesis about EMDR effects, and develop the reasons why the scientific community is still divided about EMDR. I then slide from psychology to physiology describing eye movements/emotion interaction from the physiological viewpoint, and introduce theoretical and technical tools used in movement research to re-examine EMDR neural mechanism. Using a recent physiological model for the neuropsychological architecture of motor and cognitive control, the Threshold Interval Modulation with Early Release-Rate of rIse Deviation with Early Release (TIMER-RIDER)-model, I explore how attentional control and bilateral stimulation may participate to EMDR effects. These effects may be obtained by two processes acting in parallel: (i) activity level enhancement of attentional control component; and (ii) bilateral stimulation in any sensorimotor modality, both resulting in lower inhibition enabling dysfunctional information to be processed and anxiety to be reduced. The TIMER-RIDER model offers quantitative predictions about EMDR effects for future research about its underlying physiological mechanisms.

  6. Methodological Aspects of Cognitive Rehabilitation with Eye Movement Desensitization and Reprocessing (EMDR).

    Science.gov (United States)

    Zarghi, Afsaneh; Zali, Alireza; Tehranidost, Mehdi

    2013-01-01

    A variety of nervous system components such as medulla, pons, midbrain, cerebellum, basal ganglia, parietal, frontal and occipital lobes have role in Eye Movement Desensitization and Reprocessing (EMDR) processes. The eye movement is done simultaneously for attracting client's attention to an external stimulus while concentrating on a certain internal subject. Eye movement guided by therapist is the most common attention stimulus. The role of eye movement has been documented previously in relation with cognitive processing mechanisms. A series of systemic experiments have shown that the eyes' spontaneous movement is associated with emotional and cognitive changes and results in decreased excitement, flexibility in attention, memory processing, and enhanced semantic recalling. Eye movement also decreases the memory's image clarity and the accompanying excitement. By using EMDR, we can reach some parts of memory which were inaccessible before and also emotionally intolerable. Various researches emphasize on the effectiveness of EMDR in treating and curing phobias, pains, and dependent personality disorders. Consequently, due to the involvement of multiple neural system components, this palliative method of treatment can also help to rehabilitate the neuro-cognitive system.

  7. Eye movement desensitization and reprocessing for treating psychological disturbances in Taiwanese adolescents who experienced Typhoon Morakot.

    Science.gov (United States)

    Tang, Tze-Chun; Yang, Pinchen; Yen, Cheng-Fang; Liu, Tai-Ling

    2015-07-01

    In this case-control study, we aimed to assess the intervention effects of four-session eye movement desensitization and reprocessing (EMDR) on reducing the severity of disaster-related anxiety, general anxiety, and depressive symptoms in Taiwanese adolescents who experienced Typhoon Morakot. A total of 83 adolescents with posttraumatic stress disorder related to Typhoon Morakot, major depressive disorder, or current moderate or high suicide risk after experiencing Typhoon Morakot were allocated to a four-session course of EMDR (N = 41) or to treatment as usual (TAU; N = 42). A multivariate analysis of covariance was performed to examine the effects of EMDR in reducing the severity of disaster-related anxiety, general anxiety, and depressive symptoms in adolescents by using preintervention severity values as covariates. The multivariate analysis of covariance results indicated that the EMDR group exhibited significantly lower preintervention severity values of general anxiety and depression than did the TAU group. In addition, the preintervention severity value of disaster-related anxiety in the EMDR group was lower than that in the TAU group (p = 0.05). The results of this study support that EMDR could alleviate general anxiety and depressive symptoms and reduce disaster-related anxiety in adolescents experiencing major traumatic disasters.

  8. Is peracetic acid suitable for the cleaning step of reprocessing flexible endoscopes?

    Science.gov (United States)

    Kampf, Günter; Fliss, Patricia M; Martiny, Heike

    2014-09-16

    The bioburden (blood, protein, pathogens and biofilm) on flexible endoscopes after use is often high and its removal is essential to allow effective disinfection, especially in the case of peracetic acid-based disinfectants, which are easily inactivated by organic material. Cleaning processes using conventional cleaners remove a variable but often sufficient amount of the bioburden. Some formulations based on peracetic acid are recommended by manufacturers for the cleaning step. We performed a systematic literature search and reviewed the available evidence to clarify the suitability of peracetic acid-based formulations for cleaning flexible endoscopes. A total of 243 studies were evaluated. No studies have yet demonstrated that peracetic acid-based cleaners are as effective as conventional cleaners. Some peracetic acid-based formulations have demonstrated some biofilm-cleaning effects and no biofilm-fixation potential, while others have a limited cleaning effect and a clear biofilm-fixation potential. All published data demonstrated a limited blood cleaning effect and a substantial blood and nerve tissue fixation potential of peracetic acid. No evidence-based guidelines on reprocessing flexible endoscopes currently recommend using cleaners containing peracetic acid, but some guidelines clearly recommend not using them because of their fixation potential. Evidence from some outbreaks, especially those involving highly multidrug-resistant gram-negative pathogens, indicated that disinfection using peracetic acid may be insufficient if the preceding cleaning step is not performed adequately. Based on this review we conclude that peracetic acid-based formulations should not be used for cleaning flexible endoscopes.

  9. Physical Structure and Dust Reprocessing in a sample of HH Jets

    CERN Document Server

    Podio, L; Bacciotti, F; Eislöffel, J; Ray, T P

    2009-01-01

    We investigate the physical structure and dust reprocessing in the shocks along the beam of a number of classical Herbig-Haro jets in the Orion and Lupus molecular cloud. Spectral diagnostic techniques are applied to obtain the jet physical conditions from the ratios between selected forbidden lines. The presence of dust grains is investigated by estimating the gas-phase abundance of calcium with respect to its Solar value. We find the electron density, ne, varies between 0.05-4 10^3 cm^-3, the ionisation fraction, xe, is 0.01-0.7, the temperature, te, ranges between 0.6-3 10^4 K, and the hydrogen density between 0.01-6 10^4 cm^-3. Interestingly, in the HH 111 jet, ne, xe, and te, peak in the High Velocity Interval (HVI) of the strongest working surfaces, confirming the prediction from shocks models. Calcium turns out to be depleted with respect to its Solar value, but its gas-phase abundance is higher than that estimated in the interstellar medium in Orion. The depletion is high (up to 80%) along the low-exc...

  10. Reprocessed emission line profiles from dense clouds in geometrically thick accretion engines

    CERN Document Server

    Hartnoll, S A; Hartnoll, Sean A.

    2000-01-01

    The central engines of active galactic nuclei (AGN) contain cold, dense material as well as hot X-ray emitting gas. The standard paradigm for the engine geometry is a cold thin disc sandwiched between hot X-ray coronae. Strong support for this geometry in Seyferts comes from the study of fluorescent iron line profiles, although the evidence is not ubiquitously air tight. The thin disc model of line profiles in AGN and in X-ray binaries should be bench marked against other plausible possibilities. One proposed alternative is an engine consisting of dense clouds embedded in an optically thin, geometrically thick X-ray emitting engine. This model is further motivated by studies of geometrically thick engines such as advection dominated accretion flows (ADAFs). Here we compute the reprocessed iron line profiles from dense clouds embedded in geometrically thick, optically thin X-ray emitting discs near a Schwarzchild black hole. We consider a range of cloud distributions and disc solutions, including ADAFs, pure r...

  11. A Reprocessing Model for Complete Execution of RFID Access Operations on Tag Memory

    Institute of Scientific and Technical Information of China (English)

    Wooseok Ryu; Bonghee Hong; Joonho Kwon; Ge Yu

    2012-01-01

    This paper investigates the problem of inconsistent states of radio frequency identification (RFID) tag data caused by incomplete execution of read/write operations during access to RFID tag memory.Passive RFID tags require RF communication to access memory data.This study is motivated by the volatility of RF communication,where instability is caused by intermittent connections and uncertain communication.If a given tag disappears from the communication area of the reader during the reading or writing of tag data,the operation is incomplete,resulting in an inconsistent state of tag data.To avoid this inconsistency,it is necessary to ensure that any operations on tag memory are completed.In this paper,we propose an asynchronous reprocessing model for finalizing any incomplete execution of read/write operations to remove inconsistent states.The basic idea is to resume incomplete operations autonomously by detecting a tag's re-observation from any reader.To achieve this,we present a concurrency control mechanism based on continuous query processing that enables the suspended tag operations to be re-executed.The performance study shows that our model improves the number of successful operations considerably in addition to suppressing inconsistent data access completely.

  12. Rapid Large Scale Reprocessing of the ODI Archive using the QuickReduce Pipeline

    Science.gov (United States)

    Gopu, A.; Kotulla, R.; Young, M. D.; Hayashi, S.; Harbeck, D.; Liu, W.; Henschel, R.

    2015-09-01

    The traditional model of astronomers collecting their observations as raw instrument data is being increasingly replaced by astronomical observatories serving standard calibrated data products to observers and to the public at large once proprietary restrictions are lifted. For this model to be effective, observatories need the ability to periodically re-calibrate archival data products as improved master calibration products or pipeline improvements become available, and also to allow users to rapidly calibrate their data on-the-fly. Traditional astronomy pipelines are heavily I/O dependent and do not scale with increasing data volumes. In this paper, we present the One Degree Imager - Portal, Pipeline and Archive (ODI-PPA) calibration pipeline framework which integrates the efficient and parallelized QuickReduce pipeline to enable a large number of simultaneous, parallel data reduction jobs - initiated by operators AND/OR users - while also ensuring rapid processing times and full data provenance. Our integrated pipeline system allows re-processing of the entire ODI archive (˜15,000 raw science frames, ˜3.0 TB compressed) within ˜18 hours using twelve 32-core compute nodes on the Big Red II supercomputer. Our flexible, fast, easy to operate, and highly scalable framework improves access to ODI data, in particular when data rates double with an upgraded focal plane (scheduled for 2015), and also serve as a template for future data processing infrastructure across the astronomical community and beyond.

  13. Use of eye movement desensitization and reprocessing (EMDR) in the treatment of dermatologic disorders.

    Science.gov (United States)

    Gupta, Madhulika A; Gupta, Aditya K

    2002-01-01

    The use of psychological therapies in dermatology is being increasingly recognized because stress and negative emotions are major factors in a wide range of dermatologic disorders. Eye movement desensitization and reprocessing (EMDR) is a relatively new psychological intervention which was first described to be effective in post-traumatic stress disorder, a condition associated with extremely stressful life situations. We evaluated the efficacy of EMDR in primary dermatologic disorders where psychological stress plays an important part in the pathogenesis of the disorder, and in clinical situations where the dermatologic symptom is the feature of a stress-related psychiatric disorder. Four patients (two patients with atopic dermatitis and psoriasis, respectively, whose symptoms were exacerbated by stress, one patient with acne excoríee associated with body image pathology as a result of childhood emotional abuse, and one patient with generalized urticaria associated with post-traumatic stress disorder) were treated using the standard EMDR protocol with 3-6 sessions for a period ranging from 4 to 12 weeks, and followed up for 6-12 months after the end of EMDR therapy. All 4 patients experienced a marked improvement in their symptoms after 3-6 sessions of EMDR, within a period of dermatologic symptoms.

  14. Waste management system alternatives for treatment of wastes from spent fuel reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    McKee, R.W.; Swanson, J.L.; Daling, P.M.; Clark, L.L.; Craig, R.A.; Nesbitt, J.F.; McCarthy, D.; Franklin, A.L.; Hazelton, R.F.; Lundgren, R.A.

    1986-09-01

    This study was performed to help identify a preferred TRU waste treatment alternative for reprocessing wastes with respect to waste form performance in a geologic repository, near-term waste management system risks, and minimum waste management system costs. The results were intended for use in developing TRU waste acceptance requirements that may be needed to meet regulatory requirements for disposal of TRU wastes in a geologic repository. The waste management system components included in this analysis are waste treatment and packaging, transportation, and disposal. The major features of the TRU waste treatment alternatives examined here include: (1) packaging (as-produced) without treatment (PWOT); (2) compaction of hulls and other compactable wastes; (3) incineration of combustibles with cementation of the ash plus compaction of hulls and filters; (4) melting of hulls and failed equipment plus incineration of combustibles with vitrification of the ash along with the HLW; (5a) decontamination of hulls and failed equipment to produce LLW plus incineration and incorporation of ash and other inert wastes into HLW glass; and (5b) variation of this fifth treatment alternative in which the incineration ash is incorporated into a separate TRU waste glass. The six alternative processing system concepts provide progressively increasing levels of TRU waste consolidation and TRU waste form integrity. Vitrification of HLW and intermediate-level liquid wastes (ILLW) was assumed in all cases.

  15. Assimilation of reprocessed ERS scatterometer data into ECMWF weather analysis on the Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    R. Crapolicchio

    2005-01-01

    Full Text Available Since the launch of ERS-1 in 1991 and ERS-2 in 1995, carrying a C-band Scatterometer, a data set of more than thirteen years of backscattered signal from the Earth surface is available for exploitation. With its global coverage, day or night and all-weather operation, ERS Scatterometer data offer unique opportunity for long-term studies and research. To fulfill the needs of the scientific community, the European Space Agency (ESA has developed the project: Advanced Scatterometer Processing System (ASPS. Main scope of the project is to provide with state-of-the-art algorithm, high quality and homogenous Scatterometer measurements (sigma nought of the Earth surface and high quality wind field over the Oceans by re-processing the entire ERS mission. Additional scope is to provide on experimental basis scientific products in high resolution tailored for the emerging Scatterometer application on Ice and Land. The ASPS project is now in a pre-operational phase and the scope of the paper is to give to the scientific community an overview of the ASPS data and show the assimilation of the data into the ECMWF weather analysis system. ASPS data hopefully will help the scientific community to better understand and monitor the Earth's climate changes and to protect our environment.

  16. The Effectiveness of Eye Movement Desensitization and Reprocessing Therapy on the Emotion Regulation and Emotion Recognition of Addicted Individuals

    Directory of Open Access Journals (Sweden)

    Soheyla Meysami-Bonab

    2012-10-01

    Full Text Available Background: The purpose of this study is to assess the effectiveness of eye movement desensitization and reprocessing therapy on the emotion regulation and emotion recognition of addicts with traumatic experience. Materials and Methods: This research is an experimental study with pre and post-test design and a control group. The subjects of this study were selected using random sampling method on drug addicts of Ardebil Addiction Treatment Camp who have successfully completed the detoxification period and they were evaluated in two different experimental (15 individuals and control (15 individuals groups. The experimental group was treated with EMDR therapy for 8 sessions (each one for 60 minutes and the control group received no special treatment. All participants filled a questionnaire of Emotion Regulation and Emotion Recognition at the onset of the research and 2 months after termination of treatment. For the data analysis, SPSS-17 software and covariance analysis were used.Results: The results of covariance analysis test indicated that the eye movement desensitization and reprocessing therapy intervention increased the average of positive emotion regulation and emotion recognition scores in the post-test phase and significantly reduced the average of negative emotion regulation scores.Conclusion: These results suggest that the treatment of eye movement desensitization and reprocessing is effective in improving regulation and recognition of emotions in addicts with traumatic experience.

  17. Effect of Cognitive Processing Therapy and Holographic Reprocessing on Reduction of Posttraumatic Cognitions in Students Exposed to Trauma

    Directory of Open Access Journals (Sweden)

    Parviz molavi

    2011-10-01

    Full Text Available "nObjective: This research was conducted to examine the effect of cognitive processing therapy and holographic reprocessing on the reduction of posttraumatic cognitions in students exposed to trauma. "nMethod: This was an experimental study with spread pretest-posttest randomized groups design. Statistical society of this research consisted of male freshman, junior and senior high school students of Uremia (N=10286. Utilizing Traumatic Events Screening Inventory, and SCL-90 R on 1000 randomly selected high school students, 129 students were recognized as having experienced traumatic events. Of the subjects, 60 were selected randomly. Then, clinical interview was conducted, and the selected sample was randomly assigned in to three groups of cognitive processing therapy, holographic reprocessing and control. These groups responded to Posttraumatic Cognitions Inventory in pretest and post test. Differences of pre-post test scores were analyzed using one way ANOVA and Scheffe test. "nResults: The results demonstrated significant differences between the three groups in total score of the Posttraumatic Cognition Inventory. Difference was also observed in negative cognitions on self and self-blame dimensions. Furthermore, these two therapeutic methods were equally effective in the reduction of posttraumatic cognitions.   "nConclusion: It appears that cognitive processing therapy and holographic reprocessing which had been originally developed and tested for sexually assaulted females, can also be applied for the victims of other traumatic events, particularly  adolescents.

  18. Evaluation of reprocessing medical devices in 14 German regional hospitals and at 27 medical practitioners‘ offices within the European context – consequences for European harmonization

    Directory of Open Access Journals (Sweden)

    Thiede, Birgit

    2013-11-01

    Full Text Available [english] Safe reprocessing of medical devices through cleaning, disinfection, and sterilization is essential for the prevention of health care associated infections (HAI and to guarantee patient safety. Several studies detected residual contamination and even severe infections of patients, despite carrying out reprocessing. To develop appropriate solutions, the existing situation in Germany and selected European countries was analyzed. Additionally, in 27 medical practitioners’ offices and 14 hospitals, the true practice of reprocessing was analyzed using a questionnaire, a checklist, and inspection on site. A structured analysis of potential alternatives to the internal reprocessing was conducted within the German and European context. The results indicate that the conditions for the execution of the reprocessing process in the analyzed health facilities in southern Hesse (Germany do not satisfy legal requirements. The detected deficiencies were consistent with other reports from Germany and Europe. The analysis gave insight into several reasons for the detected deficiencies. The three main reasons were the high costs for proper implementation, the subjective value assigned to the reprocessing unit in health care facilities, and deficits in monitoring by the health authority. Throughout the European Union, a similar regulatory framework for the performance of the reprocessing process exists, while the environment, structures of the health systems and administrative supervision vary significantly. The German states as well as selected European countries are currently discussing the challenges of increased quality-assured execution of the reprocessing process. For instance, the same supervisory system for hospitals and medical practitioners should be established at an equal standard. Alternatives such as the use of single-use medical devices, outsourcing the decontamination processes, or the cooperation of health facilities may be considered

  19. 10 CFR Appendix I to Part 110 - Illustrative List of Reprocessing Plant Components Under NRC Export Licensing Authority

    Science.gov (United States)

    2010-01-01

    ... products by solvent extraction using a mixture of tributyl phosphate in an organic diluent. Purex... denitration of uranium nitrate, conversion of plutonium nitrate to oxide metal, and treatment of fission... plutonium oxide conversion systems. Complete systems especially designed or prepared for the conversion...

  20. The effect of eye movement and desensitization by reprocessing on depression in adolescents with Thalassemia

    Directory of Open Access Journals (Sweden)

    Shahnavazi

    2016-09-01

    Full Text Available Introduction: Thalassemia is the most common genetic diseases in the world and especially in our country. For many reasons, including chronic disease, health care costs, fear of early death, disease statues led to Depression, psychological and social problems in thalassemia patients. This study aimed to determine the efficacy of eye movement desensitization and processing efficiency of this method and to decreasing the Depression of children with thalassemia. Method: This study was a clinical trial. 60 thalassemic patients aged 20-12 years were randomly assigned to two groups. Demographic questionnaire and Beck Depression Inventory were used to collection of data. The trial of eye movement desensitization and reprocessing in 3 sessions on alternate days for 45 to 30 minutes after. Depression before and after the intervention were measured velocity. An analysis by descriptive statistics, t-test and paired t-test, Mann-Whitney and Wilcoxon tests Non parameter equal to the Kolmogorov-Smirnov test was performed. Results: This study shows that the mean or average level of Depression children with thalassemia before implementing EMDR therapy group27/73±3/52 was After doing EMDR therapy to 17/80±2/36 was Which is greatly reduced compared to pre-intervention and the results were statistically significant(P0<001. The result showed that EMDR has main full effect on decreasing the symptoms of Depression. Conclusion: The result showed that EMDR can useful through having the influence on integration information processing an effective method to treat or reduce Depression children with thalassemia.

  1. A Green Approach to SNF Reprocessing: Are Common Household Reagents the Answer?

    Energy Technology Data Exchange (ETDEWEB)

    Peper, Shane M.; McNamara, Bruce K.; O' Hara, Matthew J.; Douglas, Matthew

    2008-04-03

    It has been discovered that UO2, the principal component of spent nuclear fuel (SNF), can efficiently be dissolved at room temperature using a combination of common household reagents, namely hydrogen peroxide, baking soda, and ammonia. This rather serendipitous discovery opens up the possibility, for the first time, of considering a non-acidic process for recycling U from SNF. Albeit at the early stages of development, our unconventional dissolution approach possesses many attractive features that could make it a reality in the future. With dissolution byproducts of water and oxygen, our approach poses a minimal threat to the environment. Moreover, the use of common household reagents to afford actinide oxide dissolution suggests a certain degree of economic favorability. With the use of a “closed” digestion vessel as a reaction chamber, our approach has substantial versatility with the option of using either aqueous or gaseous reactant feeds or a combination of both. Our approach distinguishes itself from all existing reprocessing technologies in two important ways. First and foremost, it is an alkaline rather than an acidic process, using mild non-corrosive chemicals under ambient conditions to effect actinide separations. Secondly, it does not dissolve the entire SNF matrix, but rather selectively solubilizes U and other light actinides for subsequent separation, resulting in potentially faster head-end dissolution and fewer downstream separation steps. From a safeguards perspective, the use of oxidizing alkaline solutions to effect actinide separations also potentially offers a degree of inherent proliferation resistance, by allowing the U to be selectively removed from the remaining dissolver solution while keeping Pu grouped with the other minor actinides and fission products. This paper will describe the design and general experimental setup of a “closed” digestion vessel for performing uranium oxide dissolutions under alkaline conditions using

  2. NASADEM Initial Production Processing Results: Shuttle Radar Topography Mission (SRTM) Reprocessing with Improvements

    Science.gov (United States)

    Buckley, S.; Agram, P. S.; Belz, J. E.; Crippen, R. E.; Gurrola, E. M.; Hensley, S.; Kobrick, M.; Lavalle, M.; Martin, J. M.; Neumann, M.; Nguyen, Q.; Rosen, P. A.; Shimada, J.; Simard, M.; Tung, W.

    2016-12-01

    NASADEM is a significant modernization of SRTM digital elevation model (DEM) data supported by the NASA MEaSUREs program. We are reprocessing the raw radar signal data using improved algorithms and incorporating ICESat and DEM data unavailable during the original processing. The NASADEM products will be freely-available through the Land Processes Distributed Active Archive Center (LPDAAC) at one-arcsecond spacing and delivered by continent: North America, South America, Australia, Eurasia, Africa, and Island Groups. We are in the production phase of the project. This involves radar interferometry (InSAR) processing on thousands of radar datatakes. New phase unwrapping and height ripple error correction (HREC) procedures are applied to the data. The resulting strip DEMs and ancillary information are passed to a back-end processor to create DEM mosaics and new geocoded single-swath products. Manual data quality assessment (QA) and fixes are performed at several steps in the processing chain. Post-production DEM void-filling is described in a companion AGU Fall Meeting presentation. The team completed the InSAR processing for all continents and the manual QA of the strip DEMs for more than half the world. North America strip DEM void areas are reduced by more than 50%. The ICESat data is used for height ripple error correction and as control for continent-scale adjustment of the strip DEMs. These ripples are due to uncompensated mast motion most pronounced after Shuttle roll angle adjustment maneuvers. After an initial assessment of the NASADEM production processing for the Americas, we further refined the selection of ICESat data for control by excluded data over glaciers, snow cover, forest clear cuts, and sloped areas. The HREC algorithm reduces the North America ICESat-SRTM bias from 80 cm to 3 cm and the RMS from 5m to 4m.

  3. Glass ceramics containment matrix for insoluble residues coming from spent fuel reprocessing

    Science.gov (United States)

    Pinet, O.; Boën, R.

    2014-04-01

    Spent fuel reprocessing by hydrometallurgical process generates insoluble residues waste streams called fines solution. Considering their radioactivity, fines solution could be considered as Intermediate Level Waste. This waste stream is usually mixed with fission products stream before vitrification. Thus fines are incorporated in glass matrix designed for High Level Waste. The withdrawal of fines from high level glass could decrease the volume of high level waste after conditioning. It could also decrease the reaction time between high level waste and additives to obtain a homogeneous melt and then increase the vitrification process capacity. Separated conditioning of fines in glass matrices has been tested. The fines content targeted value is 16 wt%. To achieve this objective, two types of glass ceramic formulations have been tested. 700 g of the two selected glass ceramics have been prepared using simulated fines. Additives used were ground glass. Melting is achieved at 1100 °C. According to the type of glass ceramic, reducing or oxidizing conditions have been performed during melting. Due to their composition and the melting redox conditions, different phases have been observed. These crystalline phases are typically RuO2, metallic Ru, metallic Pd, MoO2 and CaMoO4. In view of melting these matrices in an in can process the corrosiveness of one of the most oxidizing borosilicate glass ceramic formulation has been tested. This one has been remelted at 1100 °C in inconel 601 pot for 3 days. The oxygen fugacity measurement performed in the remelted glass leads to an oxidizing value, indicating that no significant reaction occurred between the inconel pot and the glass melt had occurred.

  4. Reprocessing of dental instruments in washer-disinfectors: does a representative test soil exist in dentistry?

    Science.gov (United States)

    Franz, Alexander; Bristela, Margit; Stauffer, Fritz

    2012-01-01

    Reprocessing of medical devices, being classified as semi-critical B is recommended to be performed in a washer-disinfector. In order to estimate, whether the expected contaminants of the various medical disciplines can be effectively removed by this washer-disinfector, different so called "test soils" have been proposed to be tested as a marker of cleaning efficacy of the disinfector. Todays described test soils are optimised for the testing of contaminations occurring in surgical procedures, but not for dental procedures. In this study the test soils being proposed in the EN 15883-5 (e.g. KMNE soil, recipe by Koller and coagulated sheep's blood) were compared with 8 reference substances used in the conservative-prosthetic dental practice. The success of the cleaning efficacy in the washer-disinfector was checked visually and by determining the residual protein concentration on the contaminated instruments after the cleaning procedure. It could be shown that in contrast to the proposed test soils of the EN 15883-5, the used reference substances of the dental practice could not be removed by the washer-disinfector. Removal of these reference substances was only possible after manual or ultrasonic cleaning. Since blood plays a subordinate role as a contaminant of instruments during conservative-prosthetic dental treatments, testing of the cleaning efficacy of the washer-disinfector with test soils according to the proposals of the EN 15883-5 is not representative in this discipline of dentistry. Most of the materials used in dental practice can only be removed manually or with the help of the ultrasound bath.

  5. Correlation of radioactive waste treatment costs and the environmental impact of waste effluents in the nuclear fuel cycle: reprocessing light-water reactor fuel. [Radiation dose commitment to human populations from radioactive effluents released to environment

    Energy Technology Data Exchange (ETDEWEB)

    Finney, B.C.; Blanco, R.E.; Dahlman, R.C.; Hill, G.S.; Kitts, F.G.; Moore, R.E.; Witherspoon, J.P.

    1976-10-01

    A cost/benefit study was made to determine the cost and effectiveness of radioactive waste (radwaste) treatment systems for decreasing the release of radioactive materials from a model nuclear fuel reprocessing plant which processes light-water reactor (LWR) fuels, and to determine the radiological impact (dose commitment) of the released materials on the environment. The study is designed to assist in defining the term as low as reasonably achievable in relation to limiting the release of radioactive materials from nuclear facilities. The base case model plant is representative of current plant technology and has an annual capacity of 1500 metric tons of LWR fuel. Additional radwaste treatment systems are added to the base case plant in a series of case studies to decrease the amounts of radioactive materials released and to reduce the radiological dose commitment to the population in the surrounding area. The cost for the added waste treatment operations and the corresponding dose commitments are calculated for each case. In the final analysis, radiological dose is plotted vs the annual cost for treatment of the radwastes. The status of the radwaste treatment methods used in the case studies is discussed. Much of the technology used in the advanced cases is in an early stage of development and is not suitable for immediate use. The methodology used in estimating the costs, and the radiological doses, detailed calculations, and tabulations are presented in Appendix A and ORNL-4992. This report is a revision of the original study (ORNL/TM-4901).

  6. Microbiological evaluation of different reprocessing methods for cuffed and un-cuffed tracheostomy tubes in home-care and hospital setting

    Directory of Open Access Journals (Sweden)

    Leonhard, Matthias

    2016-02-01

    Full Text Available Background: Manufacturers’ recommendations on cleaning of tracheostomy tubes focus on general warning information and non-specific manual cleaning procedures. The aim of this experimental study was to evaluate different reprocessing methods and to determine the mechanical integrity and functionality of tracheostomy tubes following reprocessing.Methods: Sixteen cuffed or un-cuffed tracheostomy tubes obtained from hospital in-patients were reprocessed using one of the following reprocessing methods: a manual brushing and rinsing with tap water, brushing followed by disinfection with a glutaraldehyde solution, c manual brushing followed machine-based cleaning in a dishwasher, and d manual brushing followed by ultrasound cleaning in a commercially available ultrasound device. Microbial burden of the tubes before and after reprocessing was assessed by measurement of microbial colony-forming units per mL (CFU/mL of rinsing fluid. After cleaning, tracheostomy tubes were investigated for loss of functionality. Findings: Manual brushing and rinsing with tap water reduced microbial colonization in average by 10 CFU/mL, but with poor reproducibility and reliability. Complete microbial reduction was achieved only with additional chemical or machine-based thermal disinfection. Ultrasound sonification yielded no further microbial reduction after manual brushing. Conclusion: Manual brushing alone will not result in complete eradication of microorganism colonising cuffed or un-cuffed tracheostomy tubes. However, manual cleaning followed by chemical or thermal disinfection may be regarded as safe and reproducible reprocessing method. If a machine-based reprocessing method is used for cuffed tubes, the cuffs’ ventilation hose must be secured in a safe position prior to thermal disinfection.

  7. Effectiveness of Eye Movement Desensitization and Reprocessing on Anxiety in Children with Thalassemia in a 12-month follow up

    Directory of Open Access Journals (Sweden)

    A Shahnavazi

    2016-02-01

    Full Text Available Background and  Objective: Thalassemia is the most common genetic diseases in the world and especially in our country. For many reasons, including chronic disease, health care costs, the expected mortality Ray disease states such as anxiety, psychological and social problems in thalassemia. The aim of the present study was to assess the efficacy of Eye Movement Desensitization and Reprocessing (EMDR on anxiety of children with thalassemia in a 12-month follow up..  Methods: It was a clinical trial study, which was performed on 60 patients with Thalassemia in 2013-2014. A total of 60 thalassemic patients based on Beck anxiety inventory, selected using sampling and were randomly divided into experimental and Control groups. in experimental group, eye movement desensitization and reprocessing therapy was perfomed in five sessions and The control group received no intervention. In order to collect information on demographic questionnaire and Beck Anxiety Inventory were used. data were gathered on anxiety symptoms at pretreatment, posttreatment and 12 month follow up and were analyzed using descriptive statistics, repeated measures and chi square. Results: The average age of the participants was 15.22±1.93  years old. This study shows that the mean or average level of anxiety children with thalassemia in the experimental group before and after intervention and in a 12-month follow up group 34.73 ± 5.62, 19.90 ± 2.48 and 19.23 ± 2.48 respectively; repeated measures ANOVA showed significant statistical difference (p.05 Conclusion: This study shows that Method of eye movement desensitization and reprocessing as an alternative method to treat or reduce anxiety, aggressive children with thalassemia .Trained Nurses can use this new method is effective in the treatment of anxiety.

  8. Treatment of PTSD by eye movement desensitization reprocessing (EMDR) improves sleep quality, quality of life, and perception of stress.

    Science.gov (United States)

    Raboni, Mara Regina; Tufik, Sergio; Suchecki, Deborah

    2006-07-01

    The impact of posttraumatic stress disorder (PTSD) on the sleep of patients is widely reported. However, the parameters that can be altered are not the same for all patients. Some studies report an impairment of sleep maintenance and recurrent nightmares, while others failed to find such alterations. Among the many treatments, the eye movement desensitization reprocessing (EMDR) is a therapy used specifically to treat PTSD and general trauma. The purpose of this study was to examine whether EMDR treatment can improve PTSD symptoms, such as sleep, depression, anxiety, and poor quality of life.

  9. Nondestructive, energy-dispersive, x-ray fluorescence analysis of actinide stream concentrations from reprocessed nuclear fuels

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D.C.; Ruhter, W.D.

    1979-06-27

    In one plan for reprocessing LWR spent fuel, after separation from fission products and transplutonics, part of the U and all of the Pu in a nitrate solution will form a coprocessed stream which is then evaporated and sent to a hold tank for accounting. The remaining U fraction will be purified and sent to a separate storage tank. These two streams can be monitored using x-ray fluorescence analysis. This report discusses equipment, spectra, cell calibration, and dynamic concentration measurements. 7 figures. (DLC)

  10. Between innovation and tradition: the paradoxical relationship between eye movement desensitization and reprocessing and altered states of consciousness.

    Science.gov (United States)

    Stein, Debra; Rousseau, Cécile; Lacroix, Louise

    2004-03-01

    Eye movement desensitization and reprocessing (EMDR) is a relatively new form of psychotherapy to emerge in the West. Using both a case analysis and literature review we situate EMDR within the use of altered states of consciousness (ASCs) in psychological healing practices across times and cultures. We discuss EMDR's unique predicament as a therapy that draws upon techniques common to most therapeutic ASCs, while at the same time distancing itself from this tradition through its pseudoscientific language and technologic aesthetic. Our conclusion attempts to shed light on this paradox and raise questions for further study.

  11. Characterization and simulation of soft gamma-ray mirrors for their use with spent fuel rods at reprocessing facilities.

    Science.gov (United States)

    Ruz, J; Descalle, M A; Alameda, J B; Brejnholt, N F; Chichester, D L; Decker, T A; Fernandez-Perea, M; Hill, R M; Kisner, R A; Melin, A M; Patton, B W; Soufli, R; Trellue, H; Watson, S M; Ziock, K P; Pivovaroff, M J

    2016-06-01

    The use of a grazing incidence optic to selectively reflect K-shell fluorescence emission and isotope-specific lines from special nuclear materials is a highly desirable nondestructive analysis method for use in reprocessing fuel environments. Preliminary measurements have been performed, and a simulation suite has been developed to give insight into the design of the x ray optics system as a function of the source emission, multilayer coating characteristics, and general experimental configurations. The experimental results are compared to the predictions from our simulation toolkit to illustrate the ray-tracing capability and explore the effect of modified optics in future measurement campaigns.

  12. X-ray reprocessing in Narrow-Line Seyfert 1 Galaxies Ton S180 and Ark 564

    CERN Document Server

    Janiuk, A; Czerny, B

    2000-01-01

    We present the results of spectral analysis of the ASCA data for the Narrow-Line Seyfert 1 galaxy (NLS1) Ton S180 and simultaneous ASCA and RXTE data modelling for the NLS1 Ark 564. We model both the primary and reflected continuum as well as the iron K alpha line, the energy of which depends on the ionization state of the reprocessor. We show that the reprocessing matter is mildly ionized, and we find the soft to hard luminosity ratio to be about 2.5. The accretion rate approximately corresponds to the Eddington limit value.

  13. PRELIMINARY STUDY OF CERAMICS FOR IMMOBILIZATION OF ADVANCED FUEL CYCLE REPROCESSING WASTES

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.; Billings, A.; Brinkman, K.; Marra, J.

    2010-09-22

    The Savannah River National Laboratory (SRNL) developed a series of ceramic waste forms for the immobilization of Cesium/Lanthanide (CS/LN) and Cesium/Lanthanide/Transition Metal (CS/LN/TM) waste streams anticipated to result from nuclear fuel reprocessing. Simple raw materials, including Al{sub 2}O{sub 3}, CaO, and TiO{sub 2} were combined with simulated waste components to produce multiphase ceramics containing hollandite-type phases, perovskites (particularly BaTiO{sub 3}), pyrochlores, zirconolite, and other minor metal titanate phases. Identification of excess Al{sub 2}O{sub 3} via X-ray Diffraction (XRD) and Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS) in the first series of compositions led to a Phase II study, with significantly reduced Al{sub 2}O{sub 3} concentrations and increased waste loadings. Three fabrication methodologies were used, including melting and crystallizing, pressing and sintering, and Spark Plasma Sintering (SPS), with the intent of studying phase evolution under various sintering conditions. XRD and SEM/EDS results showed that the partitioning of the waste elements in the sintered materials was very similar, despite varying stoichiometry of the phases formed. The Phase II compositions generally contained a reduced amount of unreacted Al{sub 2}O{sub 3} as identified by XRD, and had phase assemblages that were closer to the initial targets. Chemical composition measurements showed no significant issues with meeting the target compositions. However, volatilization of Cs and Mo was identified, particularly during melting, since sintering of the pressed pellets and SPS were performed at lower temperatures. Partitioning of some of the waste components was difficult to determine via XRD. SEM/EDS mapping showed that those elements, which were generally present in small concentrations, were well distributed throughout the waste forms. Initial studies of radiation damage tolerance using ion beam irradiation at Los

  14. DUACS DT2014: the new multi-mission altimeter data set reprocessed over 20 years

    Science.gov (United States)

    Pujol, Marie-Isabelle; Faugère, Yannice; Taburet, Guillaume; Dupuy, Stéphanie; Pelloquin, Camille; Ablain, Michael; Picot, Nicolas

    2016-09-01

    The new DUACS DT2014 reprocessed products have been available since April 2014. Numerous innovative changes have been introduced at each step of an extensively revised data processing protocol. The use of a new 20-year altimeter reference period in place of the previous 7-year reference significantly changes the sea level anomaly (SLA) patterns and thus has a strong user impact. The use of up-to-date altimeter standards and geophysical corrections, reduced smoothing of the along-track data, and refined mapping parameters, including spatial and temporal correlation-scale refinement and measurement errors, all contribute to an improved high-quality DT2014 SLA data set. Although all of the DUACS products have been upgraded, this paper focuses on the enhancements to the gridded SLA products over the global ocean. As part of this exercise, 21 years of data have been homogenized, allowing us to retrieve accurate large-scale climate signals such as global and regional MSL trends, interannual signals, and better refined mesoscale features.An extensive assessment exercise has been carried out on this data set, which allows us to establish a consolidated error budget. The errors at mesoscale are about 1.4 cm2 in low-variability areas, increase to an average of 8.9 cm2 in coastal regions, and reach nearly 32.5 cm2 in high mesoscale activity areas. The DT2014 products, compared to the previous DT2010 version, retain signals for wavelengths lower than ˜ 250 km, inducing SLA variance and mean EKE increases of, respectively, +5.1 and +15 %. Comparisons with independent measurements highlight the improved mesoscale representation within this new data set. The error reduction at the mesoscale reaches nearly 10 % of the error observed with DT2010. DT2014 also presents an improved coastal signal with a nearly 2 to 4 % mean error reduction. High-latitude areas are also more accurately represented in DT2014, with an improved consistency between spatial coverage and sea ice edge

  15. Proof of concept experiments of the multi-isotope process monitor: An online, nondestructive, near real-time monitor for spent nuclear fuel reprocessing facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R., E-mail: christopher.orton@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States); Fraga, Carlos G., E-mail: carlos.fraga@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States); Christensen, Richard N., E-mail: christensen.3@osu.edu [The Ohio State University, 201W. 19th Avenue, Columbus, Ohio 43210 (United States); Schwantes, Jon M., E-mail: jon.schwantes@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States)

    2012-04-21

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the multi-isotope process (MIP) monitor, a novel approach to monitoring and safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial least squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-}1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  16. Proof of Concept Experiments of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near Real-Time Monitor for Spent Nuclear Fuel Reprocessing Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Schwantes, Jon M.

    2012-04-21

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near-real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the Multi-Isotope Process (MIP) Monitor, a novel approach to safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal Component Analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial Least Squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-} 1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  17. Proof of concept experiments of the multi-isotope process monitor: An online, nondestructive, near real-time monitor for spent nuclear fuel reprocessing facilities

    Science.gov (United States)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard N.; Schwantes, Jon M.

    2012-04-01

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the multi-isotope process (MIP) monitor, a novel approach to monitoring and safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial least squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of ±1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  18. Study of the potential uses of the Barnwell Nuclear Fuel Plant (BNFP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-25

    The purpose of this study is to provide an evaluation of possible international and domestic uses for the Barnwell Nuclear Fuel Plant, located in South Carolina, at the conclusion of the International Nuclear Fuel Cycle Evaluation. Four generic categories of use options for the Barnwell plant have been considered: storage of spent LWR fuel; reprocessing of LWR spent fuel; safeguards development and training; and non-use. Chapters are devoted to institutional options and integrated institutional-use options.

  19. Effect of Extrusion on the Mechanical and Rheological Properties of a Reinforced Poly(Lactic Acid: Reprocessing and Recycling of Biobased Materials

    Directory of Open Access Journals (Sweden)

    Víctor Peinado

    2015-10-01

    Full Text Available The aim of this research paper is to study the behaviour of a common used biopolymer (Poly(Lactic Acid (PLA after several reprocesses and how two different types of additives (a melt strength enhancer and a nanoadditive affect its mechanical and rheological properties. Systematic extraction of extrudate samples from a twin-screw compounder was done in order to study the effect in the properties of the reprocessed material. Detailed rheological tests on a capillary rheometer as well as mechanical studies on a universal tensile machine after preparation of injected specimens were carried out. Results evidenced that PLA and reinforced PLA materials can be reprocessed and recycled without a remarkable loss in their mechanical properties. Several processing restrictions and specific phenomena were identified and are explained in the present manuscript.

  20. Process Description and Operating History for the CPP-601/-640/-627 Fuel Reprocessing Complex at the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    E. P. Wagner

    1999-06-01

    The Fuel Reprocessing Complex (FRC) at the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory was used for reprocessing spent nuclear fuel from the early 1950's until 1992. The reprocessing facilities are now scheduled to be deactivated. As part of the deactivation process, three Resource Conservation and Recovery Act (RCRA) interim status units located in the complex must be closed. This document gathers the historical information necessary to provide a rational basis for the preparation of a comprehensive closure plan. Included are descriptions of process operations and the operating history of the FRC. A set of detailed tables record the service history and present status of the process vessels and transfer lines.

  1. Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

    Energy Technology Data Exchange (ETDEWEB)

    Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

    2013-10-01

    The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbent development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.

  2. Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

    Energy Technology Data Exchange (ETDEWEB)

    Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

    2013-09-01

    The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbent development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.

  3. Efficacy of Eye Movements Desensitization and Reprocessing on the Quality of Life of the Patients with Myocardial Infarction.

    Science.gov (United States)

    Salehian, Tahmineh; Saeedinejad, Saidzaker; Behnammoghadam, Mohammad; Shafiee, Mohsen; Mohammadhossini, Sima; Behnammoghadam, Zargham; Behnammoghadam, Aziz; Ebrahimpour, Soheil; Paymard, Akvan

    2016-10-01

    Myocardial infarction causes limitations in the physical activity and perturbation of quality of life.The aim of this study was to evaluate the effect of eye movements desensitization and reprocessing (EMDR) on the quality of life of these patients. This study was conducted in two groups as the before and after while the effect of eye movements desensitization and reprocessing on the quality of life of the patients with Myocardial infarction. Sampling was done based on the purposive sampling. Patients were randomly divided into two experimental and control groups (30 patients in each group). Samples were assigned through randomized allocation. In the experimental group, the EMDR method was carried out on the patients in five 90-minute sessions over a two week period. In the control group no intervention was received. Data of Quality of life, pre-treatment, post-treatment were analyzed using SPSS. The results showed that the quality of life increase in all its dimensions of the experimental group, after performing the EMDR therapy significantly (P=0.001). Treatment what has already been stated, was effective on the quality of life in patients. Treatment team members can use this method as an effective intervention in order to improve the quality of life of their patients.

  4. Synthesis and properties of reprocessable sulfonated polyimides cross-linked via acid stimulation for use as proton exchange membranes

    Science.gov (United States)

    Zhang, Boping; Ni, Jiangpeng; Xiang, Xiongzhi; Wang, Lei; Chen, Yongming

    2017-01-01

    Cross-linked sulfonated polyimides are one of the most promising materials for proton exchange membrane (PEM) applications. However, these cross-linked membranes are difficult to reprocess because they are insoluble. In this study, a series of cross-linkable sulfonated polyimides with flexible pendant alkyl side chains containing trimethoxysilyl groups is successfully synthesized. The cross-linkable polymers are highly soluble in common solvents and can be used to prepare tough and smooth films. Before the cross-linking reaction is complete, the membranes can be reprocessed, and the recovery rate of the prepared films falls within an acceptable range. The cross-linked membranes are obtained rapidly when the cross-linkable membranes are immersed in an acid solution, yielding a cross-linking density of the gel fraction of greater than 90%. The cross-linked membranes exhibit high proton conductivities and tensile strengths under hydrous conditions. Compared with those of pristine membranes, the oxidative and hydrolytic stabilities of the cross-linked membranes are significantly higher. The CSPI-70 membrane shows considerable power density in a direct methanol fuel cell (DMFC) test. All of these results suggest that the prepared cross-linked membranes have great potential for applications in proton exchange membrane fuel cells.

  5. Improvement of mood and sleep alterations in posttraumatic stress disorder patients by eye movement desensitization and reprocessing

    Directory of Open Access Journals (Sweden)

    Mara Regina Raboni

    2014-06-01

    Full Text Available Posttraumatic stress disorder (PTSD patients exhibit depressive and anxiety symptoms, in addition to nightmares, which interfere with sleep continuity. Pharmacologic treatment of these sleep problems improves PTSD symptoms, but very few studies have used psychotherapeutic interventions to treat PTSD and examined their effects on sleep quality. Therefore, in the present study, we sought to investigate the effects of Eye Movement Desensitization Reprocessing therapy on indices of mood, anxiety, subjective and objective sleep. The sample was composed of 11 healthy controls and 13 PTSD patients that were victims of assault and/or kidnapping. All participants were assessed before, and one day after, the end of treatment for depressive and anxiety profile, general well-being and subjective sleep by filling out specific questionnaires. In addition, objective sleep patterns were evaluated by polysomnographic recording. Healthy volunteers were submitted to the therapy for three weekly sessions, whereas PTSD patients underwent five sessions, on average. Before treatment, PTSD patients exhibited high levels of anxiety and depression, poor quality of life and poor sleep, assessed both subjectively and objectively; the latter was reflected by increased time of waking after sleep onset. After completion of treatment, patients exhibited improvement in depression and anxiety symptoms, and in quality of life; with indices that were no longer different from control volunteers. Moreover, these patients showed more consolidated sleep, with reduction of time spent awake after sleep onset. In conclusion, Eye Movement Desensitization and Reprocessing was an effective treatment of PTSD patients and improved the associated sleep and psychological symptoms.

  6. Physical and economical aspects of Pu multiple recycling on the basis of REMIX reprocessing technology in thermal reactors

    Directory of Open Access Journals (Sweden)

    Teplov Pavel S.

    2016-01-01

    Full Text Available The basic strategy of Russian nuclear energy is propagation of a closed fuel cycle on the basis of fast breeder and thermal reactors, as well as the solution of the spent nuclear fuel accumulation and resource problems. The three variants of multiple Pu and U recycling in Russian pressurized water reactor concept reactors on the basis of REgenerated MIXture of U, Pu oxides (REMIX reprocessing technology are considered in this work. The REMIX fuel is fabricated from an unseparated mixture of uranium and plutonium obtained during spent fuel reprocessing with further makeup by enriched natural U or reactor grade Pu. This makes it possible to recycle several times the total amount of Pu obtained from the spent fuel. The main difference in Pu recycling is the concept of 100% or partial fuel loading of the core. The third variant is heterogeneous composition of enriched uranium and uranium–plutonium mixed oxide fuel pins in one fuel assembly. It should be noted that all fuel assemblies with Pu require the involvement of expensive technologies during manufacturing. These three variants of the full core loadings can be balanced on zero Pu accumulation in the cycle. The various physical and economical aspects of Pu and U multiple recycling in selected variants are observed in the given work.

  7. National nuclear energy policy and Community law. Germany`s international commitments due to the EURATOM treaty and membership in the EC and their possible effects on a national policy for abandonment of spent fuel reprocessing and a phase-out of nuclear power; Nationale Kernenergiepolitik und Gemeinschaftsrecht. Die Bindungen des Euratom- und des EG-Vertrages fuer einen Verzicht auf die Wiederaufarbeitung und einen Ausstieg aus der wirtschaftlichen Nutzung der Kernenergie

    Energy Technology Data Exchange (ETDEWEB)

    Wahl, R.; Hermes, G.

    1995-08-01

    The spent fuel management concept of direct ultimate disposal is compatible in its fundamental features with the law of the European Community. This applies to a national law prohibiting spent fuel reprocessing and the handling of plutonium in Germany, imposing restrictions on exporting spent fuel assemblies and importing plutonium and reprocessing remnants, and on power plant operators to employ reprocessing services abroad. Also, a nuclear power phase-out decided by the German government would in principle not mean a breach of the EURATOM treaty. (orig./HP) [Deutsch] Als Alternative zur geltenden Rechtslage werden im Deutschen Rundestag Aenderungen vorgeschlagen, die das Entsorgungskonzept der direkten Endlagerung - d.h. ein Verbot der Wiederaufarbeitung von Brennelementen aus deutschen Kernkraftwerken auch im europaeischen Ausland - vorschreiben und einen ``Ausstieg`` aus der Kernenergienutzung anordnen. Vor dem Hintergrund einer Analyse der tatsaechlichen Situation untersucht die Studie, ob sich die Bundesrepublik Deutschland in Widerspruch zu ihren Verpflichtungen als Mitglied der Europaeischen Union, insbesondere der Europaeischen Atomgemeinschaft, setzen wuerde, wenn die Gesetzgebungsorgane diesen Aenderungsvorschlaegen folgen wuerden. Die Grundsatzfrage danach, ob es mit dem Recht der Euratom-Gemeinschaft vereinbar ist, wenn ein Mitgliedstaat sich gegen die wirtschaftliche Nutzung der Kernenergie entscheidet, wird bejaht. (orig./HP)

  8. Public comments and Task Force responses regarding the environmental survey of the reprocessing and waste management portions of the LWR fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    1977-03-01

    This document contains responses by the NRC Task Force to comments received on the report ''Environmental Survey of the Reprocessing and Waste Management Portions of the LWR Fuel Cycle'' (NUREG-0116). These responses are directed at all comments, inclding those received after the close of the comment period. Additional information on the environmental impacts of reprocessing and waste management which has either become available since the publication of NUREG-0116 or which adds requested clarification to the information in that document.

  9. World-wide redistribution of 129Iodine from nuclear fuel reprocessing facilities:results from meteoric, river, and seawater tracer studies

    Energy Technology Data Exchange (ETDEWEB)

    Fehn, U; Moran, J E; Oktay, S; Santschi, P H; Schink, D R; Snyder, G

    1998-10-02

    Releases of the long-lived radioisotope of iodine, 129I from commercial nuclear fuel reprocessing facilities in England and France have surpassed natural, and even bomb test inventories. 129I/127I ratios measured in a variety of environmental matrices from Europe, North America and the southern hemisphere show the influence of fuel reprocessing-derived 129I, which is transported globally via the atmosphere. Transport and cycling of I and 129I in the hydrosphere and in soils are described based on a spatial survey of 129I in freshwater.

  10. ConiferEST: an integrated bioinformatics system for data reprocessing and mining of conifer expressed sequence tags (ESTs

    Directory of Open Access Journals (Sweden)

    Carter Kikia

    2007-05-01

    Full Text Available Abstract Background With the advent of low-cost, high-throughput sequencing, the amount of public domain Expressed Sequence Tag (EST sequence data available for both model and non-model organism is growing exponentially. While these data are widely used for characterizing various genomes, they also present a serious challenge for data quality control and validation due to their inherent deficiencies, particularly for species without genome sequences. Description ConiferEST is an integrated system for data reprocessing, visualization and mining of conifer ESTs. In its current release, Build 1.0, it houses 172,229 loblolly pine EST sequence reads, which were obtained from reprocessing raw DNA sequencer traces using our software – WebTraceMiner. The trace files were downloaded from NCBI Trace Archive. ConiferEST provides biologists unique, easy-to-use data visualization and mining tools for a variety of putative sequence features including cloning vector segments, adapter sequences, restriction endonuclease recognition sites, polyA and polyT runs, and their corresponding Phred quality values. Based on these putative features, verified sequence features such as 3' and/or 5' termini of cDNA inserts in either sense or non-sense strand have been identified in-silico. Interestingly, only 30.03% of the designated 3' ESTs were found to have an authenticated 5' terminus in the non-sense strand (i.e., polyT tails, while fewer than 5.34% of the designated 5' ESTs had a verified 5' terminus in the sense strand. Such previously ignored features provide valuable insight for data quality control and validation of error-prone ESTs, as well as the ability to identify novel functional motifs embedded in large EST datasets. We found that "double-termini adapters" were effective indicators of potential EST chimeras. For all sequences with in-silico verified termini/terminus, we used InterProScan to assign protein domain signatures, results of which are available

  11. 眼动脱敏与再加工治疗现状%The Psychotherapy of Eye Movement Desensitization and Reprocessing

    Institute of Scientific and Technical Information of China (English)

    孙海霞; 杨蕴萍

    2004-01-01

    EMDR( Eye movement desensitization and reprocessing) is one of the first therapy to treat PTSD patient. It integrate aspects of a variety of theoretical orientations and can provide rapid clinical results compare to other treatment. There is fruitful studies to analysis its validity, but it is still need more serious controlled study to assess EMDR.

  12. Toward a Greenish Nuclear Fuel Cycle: Ionic Liquids as Solvents for Spent Nuclear Fuel Reprocessing and Other Decontamination Processes for Contaminated Metal Waste

    Science.gov (United States)

    Straka, Martin

    2016-12-01

    The final disposition of spent nuclear fuel (SNF) is an area that requires innovative solutions. The use of ionic liquids (ILs) has been examined as one means to remediate SNF in a variety of different chemical environments and with different chemical starting materials. The effectiveness of various ILs for SNF reprocessing, as well as the reaction chemistry that occurs in them, is discussed.

  13. Comparative Case Study of Diffusion of Eye Movement Desensitization and Reprocessing in Two Clinical Settings : Empirically Supported Treatment Status Is Not Enough

    NARCIS (Netherlands)

    Cook, Joan M.; Biyanova, Tatyana; Coyne, James C.

    2009-01-01

    An in-depth comparative case study was conducted of two attempts at diffusion of an empirically supported, but controversial, psychotherapy: eye movement desensitization and reprocessing (EMDR). One Department of Veterans Affairs (VA) treatment setting in which there was substantial uptake was compa

  14. Comparative Case Study of Diffusion of Eye Movement Desensitization and Reprocessing in Two Clinical Settings: Empirically Supported Treatment Status Is Not Enough

    NARCIS (Netherlands)

    Cook, Joan M.; Biyanova, Tatyana; Coyne, James C.

    2009-01-01

    An in-depth comparative case study was conducted of two attempts at diffusion of an empirically supported, but controversial, psychotherapy: eye movement desensitization and reprocessing (EMDR). One Department of Veterans Affairs (VA) treatment setting in which there was substantial uptake was compa

  15. Potential of eye movement desensitization and reprocessing therapy in the treatment of post-traumatic stress disorder.

    Science.gov (United States)

    McGuire, Tracy M; Lee, Christopher W; Drummond, Peter D

    2014-01-01

    Post-traumatic stress disorder (PTSD) continues to attract both empirical and clinical interest due to its complex symptom profile and the underlying processes involved. Recently, research attention has been focused on the types of memory processes involved in PTSD and hypothesized neurobiological processes. Complicating this exploration, and the treatment of PTSD, are underlying comorbid disorders, such as depression, anxiety, and substance use disorders. Treatment of PTSD has undergone further reviews with the introduction of eye movement desensitization and reprocessing (EMDR). EMDR has been empirically demonstrated to be as efficacious as other specific PTSD treatments, such as trauma-focused cognitive behavioral therapy. There is emerging evidence that there are different processes underlying these two types of trauma treatment and some evidence that EMDR might have an efficiency advantage. Current research and understanding regarding the processes of EMDR and the future direction of EMDR is presented.

  16. Development of spent fuel reprocessing process based on selective sulfurization: Study on the Pu, Np and Am sulfurization

    Science.gov (United States)

    Kirishima, Akira; Amano, Yuuki; Nihei, Toshifumi; Mitsugashira, Toshiaki; Sato, Nobuaki

    2010-03-01

    For the recovery of fissile materials from spent nuclear fuel, we have proposed a novel reprocessing process based on selective sulfurization of fission products (FPs). The key concept of this process is utilization of unique chemical property of carbon disulfide (CS2), i.e., it works as a reductant for U3O8 but works as a sulfurizing agent for minor actinides and lanthanides. Sulfurized FPs and minor actinides (MA) are highly soluble to dilute nitric acid while UO2 and PuO2 are hardly soluble, therefore, FPs and MA can be removed from Uranium and Plutonium matrix by selective dissolution. As a feasibility study of this new concept, the sulfurization behaviours of U, Pu, Np, Am and Eu are investigated in this paper by the thermodynamical calculation, phase analysis of chemical analogue elements and tracer experiments.

  17. Status of the nuclear measurement stations for the process control of spent fuel reprocessing at AREVA NC/La Hague

    Energy Technology Data Exchange (ETDEWEB)

    Eleon, Cyrille; Passard, Christian; Hupont, Nicolas; Estre, Nicolas [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Battel, Benjamin; Doumerc, Philippe; Dupuy, Thierry; Batifol, Marc [AREVA NC, La Hague plant - Nuclear Measurement Team, F-50444 Beaumont-Hague (France); Grassi, Gabriele [AREVA NC, 1 place Jean-Millier, 92084 Paris-La-Defense cedex (France)

    2015-07-01

    Nuclear measurements are used at AREVA NC/La Hague for the monitoring of spent fuel reprocessing. The process control is based on gamma-ray spectroscopy, passive neutron counting and active neutron interrogation, and gamma transmission measurements. The main objectives are criticality and safety, online process monitoring, and the determination of the residual fissile mass and activities in the metallic waste remained after fuel shearing and dissolution (empty hulls, grids, end pieces), which are put in radioactive waste drums before compaction. The whole monitoring system is composed of eight measurement stations which will be described in this paper. The main measurement stations no. 1, 3 and 7 are needed for criticality control. Before fuel element shearing for dissolution, station no. 1 allows determining the burn-up of the irradiated fuel by gamma-ray spectroscopy with HP Ge (high purity germanium) detectors. The burn-up is correlated to the {sup 137}Cs and {sup 134}Cs gamma emission rates. The fuel maximal mass which can be loaded in one bucket of the dissolver is estimated from the lowest burn-up fraction of the fuel element. Station no. 3 is dedicated to the control of the correct fuel dissolution, which is performed with a {sup 137}Cs gamma ray measurement with a HP Ge detector. Station no. 7 allows estimating the residual fissile mass in the drums filled with the metallic residues, especially in the hulls, from passive neutron counting (spontaneous fission and alpha-n reactions) and active interrogation (fission prompt neutrons induced by a pulsed neutron generator) with proportional {sup 3}He detectors. The measurement stations have been validated for the reprocessing of Uranium Oxide (UOX) fuels with a burn-up rate up to 60 GWd/t. This paper presents a brief overview of the current status of the nuclear measurement stations. (authors)

  18. INCREASING OIL RECOVERY THROUGH ADVANCED REPROCESSING OF 3D SEISMIC, GRANT CANYON AND BACON FLAT FIELDS, NYE COUNTY, NEVADA

    Energy Technology Data Exchange (ETDEWEB)

    Eric H. Johnson; Don E. French

    2001-06-01

    Makoil, Inc., of Orange, California, with the support of the U.S. Department of Energy has reprocessed and reinterpreted the 3D seismic survey of the Grant Canyon area, Railroad Valley, Nye County, Nevada. The project was supported by Dept. of Energy Grant DE-FG26-00BC15257. The Grant Canyon survey covers an area of 11 square miles, and includes Grant Canyon and Bacon Flat oil fields. These fields have produced over 20 million barrels of oil since 1981, from debris slides of Devonian rocks that are beneath 3,500 to 5,000 ft of Tertiary syntectonic deposits that fill the basin of Railroad Valley. High-angle and low-angle normal faults complicate the trap geometry of the fields, and there is great variability in the acoustic characteristics of the overlying valley fill. These factors combine to create an area that is challenging to interpret from seismic reflection data. A 3D seismic survey acquired in 1992-93 by the operator of the fields has been used to identify development and wildcat locations with mixed success. Makoil believed that improved techniques of processing seismic data and additional well control could enhance the interpretation enough to improve the chances of success in the survey area. The project involved the acquisition of hardware and software for survey interpretation, survey reprocessing, and reinterpretation of the survey. SeisX, published by Paradigm Geophysical Ltd., was chosen as the interpretation software, and it was installed on a Dell Precision 610 computer work station with the Windows NT operating system. The hardware and software were selected based on cost, possible addition of compatible modeling software in the future, and the experience of consulting geophysicists in the Billings area. Installation of the software and integration of the hardware into the local office network was difficult at times but was accomplished with some technical support from Paradigm and Hewlett Packard, manufacturer of some of the network equipment. A

  19. 乏燃料后处理溶解过程核临界安全初步分析%Nuclear Criticality Safety Analysis in Dissolving Process of Spent Fuel Reprocessing

    Institute of Scientific and Technical Information of China (English)

    刘颖瑜; 骆志文; 刘振华

    2013-01-01

    A rational space distribution model for spent fuel element dissolving at each stage of process in reprocessing plant was formulated .The nuclear criticality on safety issue was studied by calculating numerical model on the process of spent fuel dissolution in consideration of the given plant arrangement . An assessment of the influence of several main critical parameters to the plant safety was given .The calculation results show that the most dangerous status occurs at the initial stage of dissolution w hen fissile nuclide transforms under ideal conditions . A negative influence to the system is indicated by the increase of temperature and concentration of nitric acid ,and the effect is less than 4% .System safety can be improved greatly by the addition of neutron poison or the application of fuel burnup credit ,and the effect reaches 30% .%通过建立合理的空间分布模型,对后处理厂乏燃料溶解不同阶段的核临界安全问题进行分析,同时对重要的核临界安全参数给予影响评价。结果显示,在仅考虑易裂变核素形态转变的理想情况下,溶解初期为最危险状态;温度升高和硝酸浓度增大对系统的影响为负效应,影响均小于4%;可溶中子毒物的加入与燃耗信任制技术的应用能大幅提高系统的经济性,影响均可达到30%。

  20. X-ray and UV correlation in the quiescent emission of Cen X-4, evidence of accretion and reprocessing

    Directory of Open Access Journals (Sweden)

    Bernardini F.

    2014-01-01

    Full Text Available We conducted the first long-term (60 days, multiwavelength (optical, ultraviolet, and X-ray simultaneous monitoring of Cen X-4 with daily Swift observations, with the goal of understanding variability in the low mass X-ray binary Cen X-4 during quiescence. We found Cen X-4 to be highly variable in all energy bands on timescales from days to months, with the strongest quiescent variability a factor of 22 drop in the X-ray count rate in only 4 days. The X-ray, UV and optical (V band emission are correlated on timescales down to less than 110 s. The shape of the correlation is a power law with index γ about 0.2–0.6. The X-ray spectrum is well fitted by a hydrogen NS atmosphere (kT = 59 − 80 eV and a power law (with spectral index Γ = 1.4 − 2.0, with the spectral shape remaining constant as the flux varies. Both components vary in tandem, with each responsible for about 50% of the total X-ray flux, implying that they are physically linked. We conclude that the X-rays are likely generated by matter accreting down to the NS surface. Moreover, based on the short timescale of the correlation, we also unambiguously demonstrate that the UV emission can not be due to either thermal emission from the stream impact point, or a standard optically thick, geometrically thin disc. The spectral energy distribution shows a small UV emitting region, too hot to arise from the accretion disk, that we identified as a hot spot on the companion star. Therefore, the UV emission is most likely produced by reprocessing from the companion star, indeed the vertical size of the disc is small and can only reprocess a marginal fraction of the X-ray emission. We also found the accretion disc in quiescence to likely be UV faint, with a minimal contribution to the whole UV flux.

  1. Improved images of crustal structures in the Bergslagen, central Sweden, through seismic reprocessing of BABEL lines 1, 6 and 7

    Science.gov (United States)

    Buntin, Sebastian; Malehmir, Alireza; Malinowski, Michał; Högdahl, Karin; Juhlin, Christopher; Buske, Stefan

    2017-04-01

    In a joint effort through the BABEL project, geoscientists from five countries acquired marine seismic data in the Baltic Sea with a total length of 2268 km in the year 1989. These consisted of near-vertical reflection and wide-angle refraction seismic data, providing insights into the subsurface down to the Moho and suggesting the existence of plate tectonics already during the Paleoproterozoic. The seismic data were acquired using a receiver group interval of 50 m and a total cable length of 3 km. In total, 60 groups of 64 hydrophones at 15 m depth were used. An airgun array consisting of six equal subarrays towed at 7.5 m depth was used to generate the seismic signal. The shot interval and the corresponding record lengths were different among the lines. A record length of 25 s and 75 m shot spacing for lines 1 and 7, respectively and 23 s and 62.5 m for line 6, respectively was used. The sampling rate was 4 ms for all three profiles. Lines 1, 6 and 7 are located at the boundary to the world-class and historical Bergslagen mineral district, and are being revisited in this study. Improved images can be used to refine previous interpretations, particularly at shallower depths (< 5 km). About 27 years after the acquisition, these data have been processed again in our study. Aside from the original processing steps, like spherical divergence correction, deconvolution and NMO corrections, additional processing steps such as DMO corrections or pre- and post-stack deconvolutions and coherency enhancements were applied. The reprocessing revealed reflections in the shallow part of the profiles, likely from major deformation (multi-phase) zones extending down to the lower crust, which were not present in the previous images. Also the images of the reflections in the deeper parts are remarkably improved. This also includes a few sub-Moho reflections. The three reprocessed profiles help constrain the nature of the northern boundary of Bergslagen and associated crustal

  2. Application of ionic liquids in nuclear fuel reprocessing%离子液体在核燃料后处理中的应用

    Institute of Scientific and Technical Information of China (English)

    袁立永; 石伟群; 蓝建慧; 柴之芳

    2012-01-01

    核燃料后处理是核燃料循环的核心,对于核环境安全和核能的可持续发展意义重大.离子液体作为“新一代绿色溶剂”在核燃料后处理中具有广阔的潜在应用前景.离子液体可以替代易挥发的有机溶剂用于水法后处理萃取分离放射性核素,也可以替代强腐蚀性的高温熔盐用于干法后处理电解回收金属离子.本文在作者工作基础上总结了近年来离子液体用于核燃料水法和干法后处理的基础研究成果,归纳和分析了其中的关键科学问题.此外,由于核燃料后处理涉及强辐射应用环境,离子液体的辐射稳定性是其实际应用的前提和关键,因此本文还综述了国内外有关离子液体辐射效应的研究进展,评估了离子液体用于核燃料后处理的辐射化学可行性.最后,基于当前的研究现状和研究水平展望了离子液体在核燃料后处理应用方面的研究前景.%The nuclear fuel reprocessing, as the essential part of nuclear fuel cycle, is of great significance from the point of view of both nuclear safety and sustainable development of nuclear energy. Room temperature ionic liquids (RTILs) regarded as "new generation green solvents" have recently received an ever-increasing amount of interest in nuclear fuel reprocessing due to their unique physical and chemical properties. They can be used in aqueous reprocessing as environmentally benign alternatives to volatile organic solvents for traditional liquid-liquid extraction of high level radioactive nuclides. They are also applicable in non-aqueous reprocessing" by substituting caustic molten salts for electro-deposition of metal ions. Herein, we reviewed the recent basic researches on the utility of RTILs in nuclear fuel reprocessing, from which the key scientific issues on their practical application were summarized. In addition, it is well known that nuclear fuel reprocessing involves high-level radioactive matter, and full

  3. Report on design and technical standard planning of vibration controlling structure on the buildings, in the Tokai Reprocessing Facility, Power Reactor and Nuclear Fuel Development Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Uryu, Mitsuru; Terada, Shuji; Shinohara, Takaharu; Yamazaki, Toshihiko; Nakayama, Kazuhiko [Power Reactor and Nuclear Fuel Development Corp., Tokai, Ibaraki (Japan). Tokai Works; Kondo, Toshinari; Hosoya, Hisashi

    1997-10-01

    The Tokai reprocessing facility buildings are constituted by a lower foundation, vibration controlling layers, and upper structure. At the vibration controlling layer, a laminated rubber aiming support of the building load and extension of the eigenfrequency and a damper aiming absorption of earthquake energy are provided. Of course, the facility buildings are directly supported at the arenaceous shale (Taga Layer) of the Miocene in the Neogene confirmed to the stablest ground, as well the buildings with high vibration resistant importance in Japan. This report shows that when the vibration controlling structure is adopted for the reprocessing facility buildings where such high vibration resistance is required, reduction of input acceleration for equipments and pipings can be achieved and the earthquake resistant safety can also be maintained with sufficient tolerance and reliability. (G.K.)

  4. Report on design and technical standard planning of vibration controlling structure on the buildings, in the Tokai Reprocessing Facility, Power Reactor and Nuclear Fuel Development Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Uryu, Mitsuru; Terada, Shuji; Shinohara, Takaharu; Yamazaki, Toshihiko; Nakayama, Kazuhiko [Power Reactor and Nuclear Fuel Development Corp., Tokai, Ibaraki (Japan). Tokai Works; Kondo, Toshinari; Hosoya, Hisashi

    1997-10-01

    The Tokai reprocessing facility buildings are constituted by a lower foundation, vibration controlling layers, and upper structure. At the vibration controlling layer, a laminated rubber aiming support of the building load and extension of the eigenfrequency and a damper aiming absorption of earthquake energy are provided. Of course, the facility buildings are directly supported at the arenaceous shale (Taga Layer) of the Miocene in the Neogene confirmed to the stablest ground, as well the buildings with high vibration resistant importance in Japan. This report shows that when the vibration controlling structure is adopted for the reprocessing facility buildings where such high vibration resistance is required, reduction of input acceleration for equipments and pipings can be achieved and the earthquake resistant safety can also be maintained with sufficient tolerance and reliability. (G.K.)

  5. Symposium on the reprocessing of irradiated fuels. Book 2, Session IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1958-12-31

    Book two of this conference has a single-focused session IV entitled Nonaqueous Processing, with 8 papers. The session deals with fluoride volatility processes and pyrometallurgical or pyrochemical processes. The latter involves either an oxide drossing or molten metal extraction or fused salt extraction technique and results in only partial decontamination. Fluoride volatility processes appear to be especially favorable for recovery of enriched uranium and decontamination factors of 10/sup 7/ to 10/sup 8/ would be achieved by simpler means than those employed in solvent extraction. Data from lab research on the BrF/sub 3/ process and the ClF/sub 3/ process are given and discussed and pilot plant experience is described, all in connection with natural uranium or slightly enriched uranium processing. Fluoride volatility processes for enriched or high alloy fuels are described step by step. The economic and engineering considerations of both types of nonaqueous processing are treated separately and as fully as present knowledge allows. A comprehensive review of the chemistry of pyrometallurgical processes is included.

  6. 1974 conceptual design description of a bedded salt pilot plant in southeast New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-06-01

    The policy of the United States Atomic Energy Commission is to take custody of all commercial high-level radioactive wastes and maintain control of them in perpetuity. This policy (Title 10, Code of Federal Regulations, Part 50, Appendix F) requires that the high-level wastes from nuclear fuels reprocessing plants be solidified within five years after reprocessing and then shipped to a federal repository within ten years after reprocessing. Ultimate disposal sites and/or methods have not yet been selected and are not expected to be ready when waste deliveries begin about 1983. Therefore, the AEC plans to build an interim storage facility, called Retrievable Surface Storage Facility (RSSF), to store and isolate the waste from man and his environment until the suitability of the permanent repository is demonstrated and public acceptance has been established. Meantime, the AEC is proceeding with the study and development of an ultimate disposal method. Bedded salt is being considered for ultimate waste disposal, and work is in progress to develop a Bedded Salt Pilot Plant to demonstrate its acceptability. The pilot plant will permit in situ verification of laboratory work on the interaction of heat and radioactivity of the waste with the salt and surroundings. One concept of such a pilot facility is described.

  7. Reprocessed boomer 3D seismic-reflection data of field activity P-04-11-CC, in San Luis Obispo Bay, offshore of Pismo Beach, central California, 2011-12-06 to 2012-10-05

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset includes reprocessed boomer 3D seismic data collected by the Fugro Consultants Inc. in 2012, in San Luis Obispo Bay, offshore of Pismo Beach, central...

  8. Reprocessed 3D seismic-reflection data and neural-network fault cube of field activity P-04-11-CC, offshore Point Sal, central California, 2012-08-12 to 2012-10-05

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset includes reprocessed boomer 3D seismic data collected by the Fugro Consultants Inc. in 2012, offshore Point Sal, central California.

  9. Gas-Cooled Reactor Programs annual progress report for period ending December 31, 1973. [HTGR fuel reprocessing, fuel fabrication, fuel irradiation, core materials, and fission product distribution; GCFR fuel irradiation and steam generator modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.; Coobs, J.H.; Lotts, A.L.

    1976-04-01

    Progress is summarized in studies relating to HTGR fuel reprocessing, refabrication, and recycle; HTGR fuel materials development and performance testing; HTGR PCRV development; HTGR materials investigations; HTGR fuel chemistry; HTGR safety studies; and GCFR irradiation experiments and steam generator modeling.

  10. A novel method for recovery of acidic sludge of used-motor oil reprocessing industries to bitumen using bentonite and SBS

    OpenAIRE

    Ahmad Jonidi Jafari; malek hassanpour; Mitra Gholam; Mehdi Farzadkia

    2014-01-01

    ABSTRACT Acidic sludge is a by-product from used motor oil reprocessing industries, which thousand tons of this sludge are disposed into the environment as a hazardous waste material daily. The acidic sludge contains unsaturated compounds that are polar and asphaltene. The bitumen under certain conditions is produced from mixing of bentonite, polymer styrene – butadiene – styrene (SBS), and acidic sludge. Context and purpose: The objective of this study was the recovery of acidic sludge...

  11. The effectiveness of eye movement desensitization and reprocessing (EMDR) in reducing pathological worry in patients with generalized anxiety disorder: a preliminary study

    OpenAIRE

    Farima Rezvani; Shiva Dowlatabadi; Safieh Behzadi

    2015-01-01

    Aim of the study The current study aimed to investigate the effectiveness of eye movement desensitization and reprocessing (EMDR) in reducing pathological worry in patients with generalized anxiety disorder (GAD). Subject or material and methods Method. Three women with GAD were selected using a purposeful sampling method based on the Structured Clinical Interview for DSM-IV Axis I disorders (SCID-I). A baseline single-case experimental design was used and participants were...

  12. The Effectiveness of Eye Movement Desensitization and Reprocessing Therapy to Treat Symptoms Following Trauma in Timor Leste.

    Science.gov (United States)

    Schubert, Sarah J; Lee, Christopher W; de Araujo, Guilhermina; Butler, Susan R; Taylor, Graham; Drummond, Peter D

    2016-04-01

    The effectiveness of eye movement desensitization and reprocessing (EMDR) therapy for treating trauma symptoms was examined in a postwar/conflict, developing nation, Timor Leste. Participants were 21 Timorese adults with symptoms of posttraumatic stress disorder (PTSD), assessed as those who scored ≥2 on the Harvard Trauma Questionnaire (HTQ). Participants were treated with EMDR therapy. Depression and anxiety symptoms were assessed using the Hopkins Symptom Checklist. Symptom changes post-EMDR treatment were compared to a stabilization control intervention period in which participants served as their own waitlist control. Sessions were 60-90 mins. The average number of sessions was 4.15 (SD = 2.06). Despite difficulties providing treatment cross-culturally (i.e., language barriers), EMDR therapy was followed by significant and large reductions in trauma symptoms (Cohen's d = 2.48), depression (d = 2.09), and anxiety (d = 1.77). At posttreatment, 20 (95.2%) participants scored below the HTQ PTSD cutoff of 2. Reliable reductions in trauma symptoms were reported by 18 participants (85.7%) posttreatment and 16 (76.2%) at 3-month follow-up. Symptoms did not improve during the control period. Findings support the use of EMDR therapy for treatment of adults with PTSD in a cross-cultural, postwar/conflict setting, and suggest that structured trauma treatments can be applied in Timor Leste.

  13. Potential of eye movement desensitization and reprocessing therapy in the treatment of post-traumatic stress disorder

    Directory of Open Access Journals (Sweden)

    McGuire TM

    2014-09-01

    Full Text Available Tracy M McGuire, Christopher W Lee, Peter D Drummond School of Psychology, Murdoch University, Perth, WA, Australia Abstract: Post-traumatic stress disorder (PTSD continues to attract both empirical and clinical interest due to its complex symptom profile and the underlying processes involved. Recently, research attention has been focused on the types of memory processes involved in PTSD and hypothesized neurobiological processes. Complicating this exploration, and the treatment of PTSD, are underlying comorbid disorders, such as depression, anxiety, and substance use disorders. Treatment of PTSD has undergone further reviews with the introduction of eye movement desensitization and reprocessing (EMDR. EMDR has been empirically demonstrated to be as efficacious as other specific PTSD treatments, such as trauma-focused cognitive behavioral therapy. There is emerging evidence that there are different processes underlying these two types of trauma treatment and some evidence that EMDR might have an efficiency advantage. Current research and understanding regarding the processes of EMDR and the future direction of EMDR is presented. Keywords: post-traumatic stress disorder, eye movement desensitization, neurobiological, symptoms, treatment, comorbid

  14. The efficacy and psychophysiological correlates of dual-attention tasks in eye movement desensitization and reprocessing (EMDR).

    Science.gov (United States)

    Schubert, Sarah J; Lee, Christopher W; Drummond, Peter D

    2011-01-01

    This study aimed to investigate the psychophysiological correlates and the effectiveness of different dual-attention tasks used during eye movement desensitization and reprocessing (EMDR). Sixty-two non-clinical participants with negative autobiographical memories received a single session of EMDR without eye movements, or EMDR that included eye movements of either varied or fixed rate of speed. Subjective units of distress and vividness of the memory were recorded at pre-treatment, post-treatment, and 1 week follow-up. EMDR-with eye movements led to greater reduction in distress than EMDR-without eye movements. Heart rate decreased significantly when eye movements began; skin conductance decreased during eye movement sets; heart rate variability and respiration rate increased significantly as eye movements continued; and orienting responses were more frequent in the eye movement than no-eye movement condition at the start of exposure. Findings indicate that the eye movement component in EMDR is beneficial, and is coupled with distinct psychophysiological changes that may aid in processing negative memories.

  15. Neural processing of emotions in traumatized children treated with Eye Movement Desensitization and Reprocessing therapy: a hdEEG study.

    Science.gov (United States)

    Trentini, Cristina; Pagani, Marco; Fania, Piercarlo; Speranza, Anna Maria; Nicolais, Giampaolo; Sibilia, Alessandra; Inguscio, Lucio; Verardo, Anna Rita; Fernandez, Isabel; Ammaniti, Massimo

    2015-01-01

    Eye Movement Desensitization and Reprocessing (EMDR) therapy has been proven efficacious in restoring affective regulation in post-traumatic stress disorder (PTSD) patients. However, its effectiveness on emotion processing in children with complex trauma has yet to be explored. High density electroencephalography (hdEEG) was used to investigate the effects of EMDR on brain responses to adults' emotions on children with histories of early maltreatment. Ten school-aged children were examined before (T0) and within one month after the conclusion of EMDR (T1). hdEEGs were recorded while children passively viewed angry, afraid, happy, and neutral faces. Clinical scales were administered at the same time. Correlation analyses were performed to detect brain regions whose activity was linked to children's traumatic symptom-related and emotional-adaptive problem scores. In all four conditions, hdEEG showed similar significantly higher activity on the right medial prefrontal and fronto-temporal limbic regions at T0, shifting toward the left medial and superior temporal regions at T1. Moreover, significant correlations were found between clinical scales and the same regions whose activity significantly differed between pre- and post-treatment. These preliminary results demonstrate that, after EMDR, children suffering from complex trauma show increased activity in areas implicated in high-order cognitive processing when passively viewing pictures of emotional expressions. These changes are associated with the decrease of depressive and traumatic symptoms, and with the improvement of emotional-adaptive functioning over time.

  16. Neural processing of emotions in traumatized children treated with Eye Movement Desensitization and Reprocessing therapy: A hdEEG study

    Directory of Open Access Journals (Sweden)

    Cristina eTrentini

    2015-11-01

    Full Text Available Eye Movement Desensitization and Reprocessing (EMDR therapy has been proven efficacious in restoring affective regulation in Post–Traumatic Stress Disorder (PTSD patients. However, its effectiveness on emotion processing in children with complex trauma has yet to be explored. High density Electroencephalography (hdEEG was used to investigate the effects of EMDR on brain responses to adults’ emotions on children with histories of early maltreatment. Ten school–aged children were examined before (T0 and within one month after the conclusion of EMDR (T1. hdEEGs were recorded while children passively viewed angry, afraid, happy, and neutral faces. Clinical scales were administered at the same time. Correlation analyses were performed to detect brain regions whose activity was linked to children’s traumatic symptom–related and emotional–adaptive problem scores. In all four conditions, hdEEG showed similar significantly higher activity on the right medial prefrontal and fronto–temporal limbic regions at T0, shifting towards the left medial and superior temporal regions at T1. Moreover, significant correlations were found between clinical scales and the same regions whose activity significantly differed between pre– and post–treatment. These preliminary results demonstrate that, after EMDR, children suffering from complex trauma show increased activity in areas implicated in high–order cognitive processing when passively viewing pictures of emotional expressions. These changes are associated with the decrease of depressive and traumatic symptoms, and with the improvement of emotional–adaptive functioning over time.

  17. Impact of the use of the ferritic/martensitic ODS steels cladding on the fuel reprocessing PUREX process

    Science.gov (United States)

    Gwinner, B.; Auroy, M.; Mas, D.; Saint-Jevin, A.; Pasquier-Tilliette, S.

    2012-09-01

    Some ferritic/martensitic oxide dispersed strengthened (F/M ODS) steels are presently developed at CEA for the fuel cladding of the next generation of sodium fast nuclear reactors. The objective of this work is to study if this change of cladding could have any consequences on the spent fuel reprocessing PUREX process. During the fuel dissolution stage the cladding can actually be corroded by nitric acid. But some process specifications impose not to exceed a limit concentration of the corrosion products such as iron and chromium in the dissolution medium. For that purpose the corrosion behavior of these F/M ODS steels is studied in hot and concentrated nitric acid. The influence of some metallurgical parameters such as the chromium content, the elaboration process and the presence of the yttrium oxides is first discussed. The influence of environmental parameters such as the nitric acid concentration, the temperature and the presence of oxidizing species coming from the fuel is then analyzed. The corrosion rate is characterized by mass loss measurements and electrochemical tests. Analyses of the corroded surface are carried out by X-ray photoelectron spectroscopy.

  18. Imagery rescripting and reprocessing therapy after failed prolonged exposure for post-traumatic stress disorder following industrial injury.

    Science.gov (United States)

    Grunert, Brad K; Weis, Jo M; Smucker, Mervin R; Christianson, Heidi F

    2007-12-01

    Prolonged exposure (PE) has been reported to be effective for improving post-traumatic stress symptoms in 60-65% of trauma victims suffering from post-traumatic stress disorder (PTSD). This study examined the results of adding an imagery-based, cognitive restructuring component (imagery rescripting and reprocessing therapy, IRRT) to the treatment of 23 Type I trauma victims suffering from PTSD, all of whom failed to improve with PE alone. With the added treatment component, 18 of 23 clients showed a full recovery from their PTSD symptoms, and no longer met criteria for PTSD after 1-3 sessions of IRRT. It was noteworthy that non-FEAR emotions (e.g., guilt, shame, anger) were found to be predominant for all 23 PE failures examined in this study, suggesting that a simple habituation model (on which PE is based) is not sufficient to address non-FEAR emotions in PTSD. By contrast, IRRT, a cognitive restructuring treatment, was much more effective in PTSD symptom reduction for these clients. It was proposed that more detailed, individualized trauma assessments be conducted for each patient that focus on (1) identifying the predominant trauma-related emotions and cognitions that maintain the PTSD response, and (2) finding the best CBT "treatment fit" for the specific trauma characteristics of each patient.

  19. Mapping of crustal scale tectonic boundaries in the Ossa-Morena Zone using reprocessed IBERSEIS reflection seismic data

    Science.gov (United States)

    Kashubin, A. S.; Juhlin, C.

    2010-06-01

    The IBERSEIS deep seismic reflection profile imaged crustal scale structures in the SW Iberian Variscan belt, crossing the South Portuguese Zone, the Ossa-Morena Zone and the Central Iberian Zone in Spain. Two subsets of the profile, corresponding to the South Portuguese Zone-Ossa-Morena Zone and the Ossa-Morena Zone-Central Iberian Zone tectonic contacts, have been reprocessed with the aim of investigating the influence of cross-dip and to better image steeply dipping features. Alternative strategies for binning midpoints into common depth point (CDP) bins using different azimuths were examined for synthetic data. We show that the choice of the CDP-processing line and the bin azimuth orientation has a significant impact on the normal moveout and dip-moveout velocities and is crucial to optimizing the quality of the stacked seismic image along the crooked profile. Multi-azimuth binning, normal moveout/dip-moveout, and migration velocity analysis on synthetic and real data show the presence of clear sub-vertical upper crustal structures near the South Portuguese Zone-Ossa-Morena Zone suture, the Aroche fault. This sub-vertical reflectivity that was not imaged earlier, projects into a location in the lower crust with low reflectivity.

  20. Consolidation of the EXAm process: towards the reprocessing of a concentrated PUREX raffinate

    Energy Technology Data Exchange (ETDEWEB)

    Vanel, V.; Bollesteros, M.J.; Marie, C.; Montuir, M.; Pacary, V.; Antegnard, F.; Costenoble, S.; Boyer-Deslys, V. [CEA Marcoule, Nuclear Energy Division, Radiochemistry and Processes Department, Bagnols-sur-Ceze, F-30207 (France)

    2016-07-01

    Recycling americium alone from the spent fuel is an important issue currently studied for the future nuclear cycle (Generation IV systems) as Am is one of the main contributors to the long-term radiotoxicity and heat power of final waste. The solvent extraction process called EXAm has been developed by the CEA to enable the recovery of Am alone from a PUREX raffinate (with U, Np and Pu already removed). A mixture of DMDOHEMA and HDEHP diluted in TPH is used as the solvent and the Am/Cm selectivity is improved using TEDGA as a selective complexing agent to maintain Cm and the heavier lanthanides in the acidic aqueous phase (HNO{sub 3} 5-6 M). Americium is then selectively stripped from the light lanthanides at low acidity (pH 2.5-3) with a poly-aminocarboxylic acid (DTPA). An additional step is necessary before Am recovery, in order to strip molybdenum which would otherwise be complexed by DTPA and contaminate the Am raffinate. In order to make the process and its associated future plant more compact, the objective is now to adapt the EXAm process to a concentrated raffinate. With a concentrated PUREX raffinate, the process operates under conditions close to saturation both for the solvent and complexing agent TEDGA during the Am extraction step. Consequently, some changes were needed to adapt the flowsheet to higher concentrations of cations. Before the test on a real PUREX raffinate in the CBP shielded line at ATALANTE (at the end of 2015), the EXAm flowsheet had to be consolidated and achievable target performances ensured. A series of experiments and tests was performed: on laboratory scale (batch experiments), to identify the good operating conditions and to simulate the main phenomena involved (2010-2014); first on an inactive surrogate feed solution at G1 facility (2011-2013), and then on a surrogate feed solution with trace amounts of americium and curium (spiked test) in the C17 shielded line at ATALANTE (2014). (authors)

  1. Erroneous cardiac ECG-gated PET list-mode trigger events can be retrospectively identified and replaced by an offline reprocessing approach: first results in rodents

    Science.gov (United States)

    Böning, Guido; Todica, Andrei; Vai, Alessandro; Lehner, Sebastian; Xiong, Guoming; Mille, Erik; Ilhan, Harun; la Fougère, Christian; Bartenstein, Peter; Hacker, Marcus

    2013-11-01

    The assessment of left ventricular function, wall motion and myocardial viability using electrocardiogram (ECG)-gated [18F]-FDG positron emission tomography (PET) is widely accepted in human and in preclinical small animal studies. The nonterminal and noninvasive approach permits repeated in vivo evaluations of the same animal, facilitating the assessment of temporal changes in disease or therapy response. Although well established, gated small animal PET studies can contain erroneous gating information, which may yield to blurred images and false estimation of functional parameters. In this work, we present quantitative and visual quality control (QC) methods to evaluate the accuracy of trigger events in PET list-mode and physiological data. Left ventricular functional analysis is performed to quantify the effect of gating errors on the end-systolic and end-diastolic volumes, and on the ejection fraction (EF). We aim to recover the cardiac functional parameters by the application of the commonly established heart rate filter approach using fixed ranges based on a standardized population. In addition, we propose a fully reprocessing approach which retrospectively replaces the gating information of the PET list-mode file with appropriate list-mode decoding and encoding software. The signal of a simultaneously acquired ECG is processed using standard MATLAB vector functions, which can be individually adapted to reliably detect the R-peaks. Finally, the new trigger events are inserted into the PET list-mode file. A population of 30 mice with various health statuses was analyzed and standard cardiac parameters such as mean heart rate (119 ms ± 11.8 ms) and mean heart rate variability (1.7 ms ± 3.4 ms) derived. These standard parameter ranges were taken into account in the QC methods to select a group of nine optimal gated and a group of eight sub-optimal gated [18F]-FDG PET scans of mice from our archive. From the list-mode files of the optimal gated group, we

  2. Reprocessing and Interpretation of Vintage Seismic Reflection Data: Evidence for the Tectonic History of the Rocky Mountain Trench, Northwest Montana.

    Science.gov (United States)

    Porter, M.; Speece, M. A.; Rutherford, B. S.; Constenius, K. N.

    2014-12-01

    In 1983 Techno, Inc. collected five seismic reflection profiles in the region between Whitefish, Montana and the United States-Canada border. The poulter method was used to gather four of these profiles and one profile was collected using a vibroseis source. We are currently reprocessing these data in order to construct a regional geological interpretation. The profiles cover a key position in the hinterland of the Cordillera in the lee of the Lewis thrust salient where the east-northeast verging Lewis thrust fault system translated (horizontal displacement >100 km) and inverted a thick, strong slab of primarily Belt-Purcell rocks out of a deep Precambrian depositional basin onto a cratonic platform. In this event, Belt-Purcell rocks were thrust over complexly imbricated Phanerozoic strata in the foreland. Late Mesozoic compressional deformation was followed by Cenozoic extensional collapse of the over-thickened Cordillera and subsequent basin and range style deformation that produced an array of northwest trending grabens. Three of the seismic profiles cross the Rocky Mountain Trench; the Trench is a linear structure of regional dimension that is an expression of the extensional fragmentation of the Cordillera. Strong reflections, interpreted as sills encased within Lower Belt rocks (encountered in the Arco-Marathon 1 Paul Gibbs borehole), outline the complexly folded and faulted structure of the eastern limb of the Purcell anticlinorium. East of the Rocky Mountain Trench stratified reflections within Belt rocks clearly outline the Wigwam Thrust. Beneath the Whitefish Range, an apparent inflection in the strongly reflective basal Cambrian veneer marks the westerly increase in dip of the Rocky Mountain Basal Detachment. The dip contrast between the foreland and hinterland might be a manifestation of the tectonic loading of the Belt basin margin and the loading might have localized extension across the Rocky Mountain Trench.

  3. Status of nuclear fuel reprocessing, spent fuel storage, and high-level waste disposal. Overview and summary

    Energy Technology Data Exchange (ETDEWEB)

    Varanini, E.E. III; Maullin, R.L.

    1978-01-11

    With regard to the specific question embodied in California's nuclear statutes about the demonstrated and approved permanent terminal disposal of nuclear waste (assuming that the reprocessing question is now most for legislative purposes), the finding of the Energy Commission is that such a technology has not been demonstrated and that it is even questionable to assume that one will be demonstrated before the mid 1980s. Following upon this finding and addressing the broader question of continued implementation of the policy expressed by the nuclear fuel cycle statutes, the evidence indicates that it is not prudent to continue siting nuclear powerplants based on an optimistic assumption that waste management technologies to handle nuclear waste will be developed and scientifically demonstrated. The California Legislature has questioned that optimistic assumption by placing the burden of proof on the developers of a demonstrated, scientifically tested process for the permanent and terminal disposal of nuclear wastes. Such a process does not exist at this time. There are many who are optimistic that the development of such a technology will become a reality in the near future. This overview and the supporting report indicate that this optimism is not warranted. Weapons proliferation and degradation of the biosphere by radioactive waste have proved to be unanticipated, difficult and possibly intractable problems in spite of an overriding confidence that nuclear technology would not present such problems. On the basis of the evidence received by this Commission, there are substantial scientific gaps which preclude proceeding on the basis of faith that all the attendant risks and issues will be resolved.

  4. Surgical instrument biocontaminant fluorescence detection in ambient lighting conditions for hospital reprocessing and sterilization department (Conference Presentation)

    Science.gov (United States)

    Baribeau, François; Bubel, Annie; Dumont, Guillaume; Vachon, Carl; Lépine, André; Rochefort, Stéphane; Massicotte, Martin; Buteau-Vaillancourt, Louis; Gallant, Pascal; Mermut, Ozzy

    2017-03-01

    Hospitals currently rely on simple human visual inspection for assessing cleanliness of surgical instruments. Studies showed that surgical site infections are in part attributed to inadequate cleaning of medical devices. Standards groups recognize the need to objectively quantify the amount of residues on surgical instruments and establish guidelines. We developed a portable technology for the detection of contaminants on surgical instruments through fluorescence following cleaning. Weak fluorescence signals are usually detected in the obscurity only with the lighting of the excitation source. The key element of this system is that it works in ambient lighting conditions, a requirement to not disturb the normal workflow of hospital reprocessing facilities. A biocompatible fluorescent dye is added to the detergent and labels the proteins of organic residues. It is resistant to the harsh environment in a washer-disinfector. Two inspection devices have been developed with a 488nm laser as the excitation source: a handheld scanner and a tabletop station using spectral-domain and time-domain ambient light cancellation schemes. The systems are eye safe and equipped with image processing and interfacing software to provide visual or audible warnings to the operator based on a set of adjustable signal thresholds. Micron-scale residues are detected by the system which can also evaluate soil size and mass. Unlike swabbing, it can inspect whole tools in real-time. The technology has been validated in an independent hospital decontamination research laboratory. It also has potential applications in the forensics, agro-food, and space fields. Technical aspects and results will be presented and discussed.

  5. Materials accounting in a fast-breeder-reactor fuels-reprocessing facility: optimal allocation of measurement uncertainties

    Energy Technology Data Exchange (ETDEWEB)

    Dayem, H.A.; Ostenak, C.A.; Gutmacher, R.G.; Kern, E.A.; Markin, J.T.; Martinez, D.P.; Thomas, C.C. Jr.

    1982-07-01

    This report describes the conceptual design of a materials accounting system for the feed preparation and chemical separations processes of a fast breeder reactor spent-fuel reprocessing facility. For the proposed accounting system, optimization techniques are used to calculate instrument measurement uncertainties that meet four different accounting performance goals while minimizing the total development cost of instrument systems. We identify instruments that require development to meet performance goals and measurement uncertainty components that dominate the materials balance variance. Materials accounting in the feed preparation process is complicated by large in-process inventories and spent-fuel assembly inputs that are difficult to measure. To meet 8 kg of plutonium abrupt and 40 kg of plutonium protracted loss-detection goals, materials accounting in the chemical separations process requires: process tank volume and concentration measurements having a precision less than or equal to 1%; accountability and plutonium sample tank volume measurements having a precision less than or equal to 0.3%, a shortterm correlated error less than or equal to 0.04%, and a long-term correlated error less than or equal to 0.04%; and accountability and plutonium sample tank concentration measurements having a precision less than or equal to 0.4%, a short-term correlated error less than or equal to 0.1%, and a long-term correlated error less than or equal to 0.05%. The effects of process design on materials accounting are identified. Major areas of concern include the voloxidizer, the continuous dissolver, and the accountability tank.

  6. The 1946 Unimak Tsunami Earthquake Area: revised tectonic structure in reprocessed seismic images and a suspect near field tsunami source

    Science.gov (United States)

    Miller, John J.; von Huene, Roland; Ryan, Holly F.

    2014-01-01

    In 1946 at Unimak Pass, Alaska, a tsunami destroyed the lighthouse at Scotch Cap, Unimak Island, took 159 lives on the Hawaiian Islands, damaged island coastal facilities across the south Pacific, and destroyed a hut in Antarctica. The tsunami magnitude of 9.3 is comparable to the magnitude 9.1 tsunami that devastated the Tohoku coast of Japan in 2011. Both causative earthquake epicenters occurred in shallow reaches of the subduction zone. Contractile tectonism along the Alaska margin presumably generated the far-field tsunami by producing a seafloor elevation change. However, the Scotch Cap lighthouse was destroyed by a near-field tsunami that was probably generated by a coeval large undersea landslide, yet bathymetric surveys showed no fresh large landslide scar. We investigated this problem by reprocessing five seismic lines, presented here as high-resolution graphic images, both uninterpreted and interpreted, and available for the reader to download. In addition, the processed seismic data for each line are available for download as seismic industry-standard SEG-Y files. One line, processed through prestack depth migration, crosses a 10 × 15 kilometer and 800-meter-high hill presumed previously to be basement, but that instead is composed of stratified rock superimposed on the slope sediment. This image and multibeam bathymetry illustrate a slide block that could have sourced the 1946 near-field tsunami because it is positioned within a distance determined by the time between earthquake shaking and the tsunami arrival at Scotch Cap and is consistent with the local extent of high runup of 42 meters along the adjacent Alaskan coast. The Unimak/Scotch Cap margin is structurally similar to the 2011 Tohoku tsunamigenic margin where a large landslide at the trench, coeval with the Tohoku earthquake, has been documented. Further study can improve our understanding of tsunami sources along Alaska’s erosional margins.

  7. Materials accounting in a fast-breeder-reactor fuels-reprocessing facility: optimal allocation of measurement uncertainties

    Energy Technology Data Exchange (ETDEWEB)

    Dayem, H.A.; Ostenak, C.A.; Gutmacher, R.G.; Kern, E.A.; Markin, J.T.; Martinez, D.P.; Thomas, C.C. Jr.

    1982-07-01

    This report describes the conceptual design of a materials accounting system for the feed preparation and chemical separations processes of a fast breeder reactor spent-fuel reprocessing facility. For the proposed accounting system, optimization techniques are used to calculate instrument measurement uncertainties that meet four different accounting performance goals while minimizing the total development cost of instrument systems. We identify instruments that require development to meet performance goals and measurement uncertainty components that dominate the materials balance variance. Materials accounting in the feed preparation process is complicated by large in-process inventories and spent-fuel assembly inputs that are difficult to measure. To meet 8 kg of plutonium abrupt and 40 kg of plutonium protracted loss-detection goals, materials accounting in the chemical separations process requires: process tank volume and concentration measurements having a precision less than or equal to 1%; accountability and plutonium sample tank volume measurements having a precision less than or equal to 0.3%, a shortterm correlated error less than or equal to 0.04%, and a long-term correlated error less than or equal to 0.04%; and accountability and plutonium sample tank concentration measurements having a precision less than or equal to 0.4%, a short-term correlated error less than or equal to 0.1%, and a long-term correlated error less than or equal to 0.05%. The effects of process design on materials accounting are identified. Major areas of concern include the voloxidizer, the continuous dissolver, and the accountability tank.

  8. Behavior of silicon in nitric media. Application to uranium silicides fuels reprocessing; Comportement du silicium en milieu nitrique. Application au retraitement des combustibles siliciures d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Cheroux, L

    2001-07-01

    Uranium silicides are used in some research reactors. Reprocessing them is a solution for their cycle end. A list of reprocessing scenarios has been set the most realistic being a nitric dissolution close to the classic spent fuel reprocessing. This uranium silicide fuel contains a lot of silicon and few things are known about polymerization of silicic acid in concentrated nitric acid. The study of this polymerization allows to point out the main parameters: acidity, temperature, silicon concentration. The presence of aluminum seems to speed up heavily the polymerization. It has been impossible to find an analytical technique smart and fast enough to characterize the first steps of silicic acid polymerization. However the action of silicic species on emulsions stabilization formed by mixing them with an organic phase containing TBP has been studied, Silicon slows down the phase separation by means of oligomeric species forming complex with TBP. The existence of these intermediate species is short and heating can avoid any stabilization. When non irradiated uranium silicide fuel is attacked by a nitric solution, aluminum and uranium are quickly dissolved whereas silicon mainly stands in solid state. That builds a gangue of hydrated silica around the uranium silicide particulates without preventing uranium dissolution. A small part of silicon passes into the solution and polymerize towards the highly poly-condensed forms, just 2% of initial silicon is still in molecular form at the end of the dissolution. A thermal treatment of the fuel element, by forming inter-metallic phases U-Al-Si, allows the whole silicon to pass into the solution and next to precipitate. The behavior of silicon in spent fuels should be between these two situations. (author)

  9. Reflexões sobre segurança sanitária em reprocessamento de produtos para saúde / Thoughts regarding sanitary safety in medical device reprocessing

    Directory of Open Access Journals (Sweden)

    Eliana Auxiliadora Magalhães Costa

    2014-02-01

    Full Text Available Trata-se de um artigo de revisão bibliográfica sobre a segurança sanitária do repro-cessamento de produtos para saúde. Aborda a complexidade da assistência hospitalar possibilitada pelo avanço das tecnologias de saúde, especificamente dos produtos para saúde, que trazem benefícios e riscos, principalmente quando na condição de reúso e de reprocessamento. Ressalta a responsabilidade crescente do Estado, especificamente da Vigilância Sanitária e dos serviços de saúde, para prevenir danos aos pacientes usuários desses dispositivos. Introduz o conceito de risco residual, como elemento sinalizador da possibilidade da ocorrência de eventos adversos relacionados com o reprocessamento de produtos. Finaliza com as possíveis perspectivas futuras para o reprocessamento de produtos para saúde. --------------------------------------------------------------------------------- Medical products used in health services are highly complex. Despite their contribution to hospital assistance, those products are also the bearers of several risk factors, and give rise to concerns regarding safety and effectiveness of the processes related to their reprocessing and re-utilization. This descriptive-reflexive study was performed with ob-jective to present thoughts regarding sanitary safety in medical device reprocessing, and point out that there is immediate need to implement a risk management system in these hospitals, and need for greater sanitary control by the State in order to protect the health of patients. This study finish with possibles perspectives about the medical devices reprocessing.

  10. Fault Tree Analysis for Red Oil Explosion in Reprocessing Facility%后处理设施的红油爆炸故障树分析

    Institute of Scientific and Technical Information of China (English)

    王任泽; 王学新; 庄大杰; 曹芳芳

    2013-01-01

    Almost all spent fuel reprocessing facilities have adopted Purex process .T he red oil explosion is a great concern in safety study of spent fuel reprocessing facilities adopting Purex process .The event tree and fault tree analysis was performed for the red oil explosion of a medium level radioactive waste liquid evaporator for the collective decontamination and separation cycle segment in a representative reprocessing facility in this paper . The results show that the occurrence frequency of a red oil explosion is extremely low ,and human errors and common cause failures are major causes to a red oil explosion . Therefore , some relevant measures should be taken to prevent such accidents .%目前世界上几乎所有的乏燃料后处理设施均选用 Purex流程。红油爆炸事故是 Purex流程后处理设施安全研究的焦点问题之一。本文对典型后处理设施共去污分离循环工段的中放废液蒸发器的红油爆炸事故进行了事件树-故障树分析。结果显示,红油爆炸事故的发生频率极低;人因失误和共因失效对整个红油爆炸事故的贡献很大。应采取相应措施,以预防事故的发生。

  11. An updated interpretation of the Hanö Bay Basin, Baltic Sea, based on recently re-processed vintage 2D seismic data

    Science.gov (United States)

    Bell, Nicholas; Sopher, Daniel; Juhlin, Christopher

    2014-05-01

    The Hanö Bay Basin is a relatively small, tectonically controlled, Mesozoic basin in the SW Baltic Sea, Northern Europe. In this study a new seismic interpretation has been made of the basin based on re-processed vintage 2D marine seismic data. A large dataset acquired between 1970 and 1984 by Oljeprospektering AB (OPAB) containing seismic lines across the Hanö Bay Basin has recently been made available by the Swedish Geological Survey (SGU). Seismic interpretation studies within the Hanö Bay Basin were last conducted in the mid-1990's. Since this time, computer power and seismic processing methods have advanced. Re-processing of a grid of lines across the Hanö Bay Basin has allowed updated interpretations to be made which more accurately reflect the geological history of the area. Multi channel seismic data from four surveys within the OPAB dataset: NA79, D72, W70 and EA73, along with two wells H1 and H4, were used in this study. An updated interpretation of the pre-Cambrian basement, which exhibits a distinctive, sharply undulating morphology, was undertaken. The basement horizon across parts of the Hanö Bay appears to be very rugose, containing a number of distinctive troughs and peaks that are over 50m in amplitude. Within these basement troughs a set of distinct packages of sediment is observed. These packages are discontinuous and are most prevalent in a small circular area in the central section of the study area. The age of these sediment packages is uncertain, being either early Mesozoic or the erosional remnants of older Paleozoic sediments. Interpretations of the re-processed seismic data indicate, in some areas, that basin fill has occurred in a significantly different way to previous interpretations during the Mesozoic. The model proposed in this study takes into account normal movement on the Christiansø Fault prior to Cretaceous inversion.

  12. The Photometric Calibration of the Dark Energy Survey (DES): Results from the Summer 2013 Re-processing of the DES Science Verification Data

    Science.gov (United States)

    Tucker, Douglas L.; Allam, S. S.; Annis, J. T.; Armstrong, R.; Bauer, A.; Bernstein, G.; Burke, D.; Fix, M.; Foust, W.; Gruendl, R. A.; Head, H.; Kuehn, K.; Kuhlmann, S.; Li, T.; Lin, H.; Rykoff, E. S.; Smith, J.; Wester, W.; Wyatt, S.; Yanny, B.; Energy Survey, Dark

    2014-01-01

    The Dark Energy Survey (DES) -- a five-year 5000 sq deg grizY survey of the Southern sky to probe the parameters of dark energy -- recently began operations using the new 3 sq deg DECam imager on the Blanco 4m telescope at the Cerro Tololo Interamerican Observatory. In order to achieve its science goals, the DES has tight requirements on both its relative and absolute photometric calibrations. The 5-year requirements are (1) an internal (relative) photometric calibration of 2% rms (2) an absolute color calibration of 0.5%, and (3) an absolute flux calibration of 0.5% (in i-band relative to BD+17 4708). In preparation for DES operations, the instrument+telescope underwent a period of Science Verification between November 2012 and February 2013. These Science Verification (SV) data were quickly processed to determine whether the image data were being produced with sufficient quality and efficiency to meet DES science goals. These data were also useful for initial science, and they were re-processed and re-calibrated during Summer 2013. The photometric goals for Summer 2013 re-processing of the DES SV were intentionally more relaxed than the requirements for the final 5-year survey: (1) an all-sky internal (relative) calibration goal of 3%, (2) an absolute color goal of 3%, and (3) an absolute flux goal of 3%. Here, we describe the results from the photometric calibration of the Summer 2013 re-processing of the DES SV data, the lessons learned, and plans for the future.

  13. Reprocessing Coincident Refraction and Reflection Data to Constrain the Moho Depth in the Slave Craton, Northwest Territories, Canada.

    Science.gov (United States)

    Aristimuno, J.

    2005-12-01

    The Slave geological province, a relatively small area in the Canadian Northwest Territories incluiding the oldest rocks on Earth, is one of five cratons that form the Archean continental core of North America. Its tectonic evolution differs from the classical "life-raft model" proposed for most Archean terranes. In the Slave Craton, radiometric dating has revealed an east-west disparity between the various bedrock units exposed. The underlying lithospheric mantle, on the other hand, exhibits a NW-SE zonation, comprising three regions with distinctive geochemical and geophysical characteristics. This complex superposition suggests that crust-mantle coupling and stabilization occurred late in the orogenic development of the craton. Previous reflection and refraction studies in the Slave Craton have shown coincident reflection and refraction Moho depths at 33-35 km, which remain relatively constant beneath the Archean Slave Province and the Proterozoic domains located to the west. This is contrary to average values of crustal thickness from global compilations that would suggest a thicker Proterozoic crust of approximately 45 km. This observation implies that the Moho probably acted as a zone of detachment (mechanical boundary) during the Proterozoic Hottah-Slave collision. The Slave Craton has been extensively surveyed using seismic methods as part of the SNORCLE transect of the Canadian Lithoprobe project. The available data for this study are from a 600 km long seismic refraction/deep wide-angle reflection 2D profile acquired in 1997. In this paper, we present results from reprocessing both refraction and reflection seismic data. First, the refraction data is inverted and the resulting synthetic shot gathers are compared to observed data to validate the refraction velocity model. Then, the new velocity model is used as input to migrate the wide-angle reflection data. In addition, the depth to the Moho derived from inverted data will be compared to the interpreted

  14. Fuel reprocessing tank

    Energy Technology Data Exchange (ETDEWEB)

    Gonda, Sumitora

    1998-10-09

    A tank of the present invention for spent fuels comprises a stainless steel tank main body for storing a highly corrosive dissolving solution, a steam jet pump disposed to the inside of the tank main body for transferring the dissolving solution to the outside of the tank main body and pipelines connecting them. With such a constitution, abnormal abrasion and drag of mechanical parts are less caused. In addition, a cleaning nozzle and a cleaning liquid pipeline which eliminates clogging of a sucking port of the steam jet pump if clogging is caused by sludges are disposed thereby enabling to avoid possibility of clogging. (T.M.)

  15. Radioactive wastes coming from La Hague reprocessing plant exploitation; Dechets nucleaires issus de l'exploitation de l'usine de traitement de La Hague

    Energy Technology Data Exchange (ETDEWEB)

    Riva Roveda, G. [Cogema, Etablissement de la Hague, 50 - Beaumont Hague (France)

    2001-07-01

    The treatment of radioactive waste at the facility of Cogema la Hague is presented. At the different categories are associated different methods and processes. The different steps are primary waste, intermediary waste, conditioned waste and ultimate waste. (N.C.)

  16. Waste Estimates for a Future Recycling Plant in the US Based Upon AREVA Operating Experience - 13206

    Energy Technology Data Exchange (ETDEWEB)

    Foare, Genevieve; Meze, Florian [AREVA E and P, SGN - 1, rue des Herons, 78182 Montigny-le-Bretonneux (France); Bader, Sven; McGee, Don; Murray, Paul [AREVA Federal Services LLC, 7207 IBM Drive, Mail Code CLT- 1D, Charlotte NC 28262 (United States); Prud' homme, Pascal [AREVA NC SA - 1, place Jean Millier, 92084 Paris La Defense CEDEX (France)

    2013-07-01

    Estimates of process and secondary wastes produced by a recycling plant built in the U.S., which is composed of a used nuclear fuel (UNF) reprocessing facility and a mixed oxide (MOX) fuel fabrication facility, are performed as part of a U.S. Department of Energy (DOE) sponsored study [1]. In this study, a set of common inputs, assumptions, and constraints were identified to allow for comparison of these wastes between different industrial teams. AREVA produced a model of a reprocessing facility, an associated fuel fabrication facility, and waste treatment facilities to develop the results for this study. These facilities were divided into a number of discrete functional areas for which inlet and outlet flow streams were clearly identified to allow for an accurate determination of the radionuclide balance throughout the facility and the waste streams. AREVA relied primarily on its decades of experience and feedback from its La Hague (reprocessing) and MELOX (MOX fuel fabrication) commercial operating facilities in France to support this assessment. However, to perform these estimates for a U.S. facility with different regulatory requirements and to take advantage of some technological advancements, such as in the potential treatment of off-gases, some deviations from this experience were necessary. A summary of AREVA's approach and results for the recycling of 800 metric tonnes of initial heavy metal (MTIHM) of LWR UNF per year into MOX fuel under the assumptions and constraints identified for this DOE study are presented. (authors)

  17. Idaho Chemical Processing Plant spent fuel and waste management technology development program plan: 1994 Update

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Department of Energy has received spent nuclear fuel (SNF) at the Idaho Chemical Processing Plant (ICPP) for interim storage since 1951 and reprocessing since 1953. Until April 1992, the major activity of the ICPP was the reprocessing of SNF to recover fissile uranium and the management of the resulting high-level wastes (HLW). In 1992, DOE chose to discontinue reprocessing SNF for uranium recovery and shifted its focus toward the continued safe management and disposition of SNF and radioactive wastes accumulated through reprocessing activities. Currently, 1.8 million gallons of radioactive liquid wastes (1.5 million gallons of radioactive sodium-bearing liquid wastes and 0.3 million gallons of high-level liquid waste), 3,800 cubic meters of calcine waste, and 289 metric tons heavy metal of SNF are in inventory at the ICPP. Disposal of SNF and high-level waste (HLW) is planned for a repository. Preparation of SNF, HLW, and other radioactive wastes for disposal may include mechanical, physical, and/or chemical processes. This plan outlines the program strategy of the ICPP spent Fuel and Waste Management Technology Development Program (SF&WMTDP) to develop and demonstrate the technology required to ensure that SNF and radioactive waste will be properly stored and prepared for final disposal in accordance with regulatory drivers. This Plan presents a brief summary of each of the major elements of the SF&WMTDP; identifies key program assumptions and their bases; and outlines the key activities and decisions that must be completed to identify, develop, demonstrate, and implement a process(es) that will properly prepare the SNF and radioactive wastes stored at the ICPP for safe and efficient interim storage and final disposal.

  18. The new duty of care for nuclear power plant operators in Sec. 9a subpara. 2a AtG; Zur neuen Sorgepflicht der Kraftwerksbetreiber gem. paragraph 9a Abs. 2a AtG

    Energy Technology Data Exchange (ETDEWEB)

    Posser, Herbert [Freshfields Bruckhaus Deringer LLP, Duesseldorf (Germany)

    2014-07-15

    The new stipulation in Sec. 9a subpara. 2a AtG - pursuant to which operators of nuclear power plants are no longer entitled to use the interim storage facility in Gorleben for radioactive waste stemming from the reprocessing plants in Sellafield and La Hague, but have to establish further capacities in their own facilities for spent nuclear fuels at the site of the power plants - is illegal under constitutional law. It imposes an unproportional burden on the plant operators as well as on GNS, and infringes property rights without pursuing a legitimate purpose. (orig.)

  19. Cementation of the medium-activity AMOR waste solution at VKTA Rossendorf with the MOSS-200 mobile plant

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, F.; Pfefferkorn, G. [Nuclear Process Engineering and Analysis Association Rossendorf e. V. (VKTA), Dresden (Germany); Ekberg, A. [Westinghouse Atom AB, Vaesteras (Sweden); Mika, S. [Westinghouse Reaktor GmbH, Mannheim (Germany)

    2001-07-01

    Molybdenum-99 has been isolated since 1985 at the former Central Institute for Nuclear Research at Rossendorf from aluminium-clad fuel assemblies exposed in the research reactor for production of technetium-99m generators. The Rossendorf molybdenum production plant operated for this (abbreviated to AMOR - a German acronym), consisted of three plant sections. Plant section AMOR I was responsible for the resolution process and molybdenum extraction. Plant AMOR II was used for nuclear fuel recovery from AMOR-I waste solution by liquid-liquid extraction, and plant AMOR III was responsible for reprocessing the AMOR-II extract. The entire AMOR plant was shut down in late 1990. Radiologically, the residue from AMOR production can be classified as medium-activity liquid waste with the most important radioactive constituents being the two isotopes strontium-90 and caesium-137. Chemically, the waste consists of highly acidic (nitric acid) solution containing aluminium nitrate. (orig.)

  20. A controlled comparison of the effectiveness and efficiency of two psychological therapies for posttraumatic stress disorder: eye movement desensitization and reprocessing vs. emotional freedom techniques.

    Science.gov (United States)

    Karatzias, Thanos; Power, Kevin; Brown, Keith; McGoldrick, Theresa; Begum, Millia; Young, Jenny; Loughran, Paul; Chouliara, Zoë; Adams, Sally

    2011-06-01

    The present study reports on the first ever controlled comparison between eye movement desensitization and reprocessing (EMDR) and emotional freedom techniques (EFT) for posttraumatic stress disorder. A total of 46 participants were randomized to either EMDR (n = 23) or EFT (n = 23). The participants were assessed at baseline and then reassessed after an 8-week waiting period. Two further blind assessments were conducted at posttreatment and 3-months follow-up. Overall, the results indicated that both interventions produced significant therapeutic gains at posttreatment and follow-up in an equal number of sessions. Similar treatment effect sizes were observed in both treatment groups. Regarding clinical significant changes, a slightly higher proportion of patients in the EMDR group produced substantial clinical changes compared with the EFT group. Given the speculative nature of the theoretical basis of EFT, a dismantling study on the active ingredients of EFT should be subject to future research.

  1. Treatment of gay men for post-traumatic stress disorder resulting from social ostracism and ridicule: cognitive behavior therapy and eye movement desensitization and reprocessing approaches.

    Science.gov (United States)

    Carbone, Dominic J

    2008-04-01

    This report describes the clinical treatment of a sample of four gay men suffering from Post-Traumatic Stress Disorder (PTSD) attributed to their repeated experiences with peer ridicule and ostracism throughout childhood and adolescence, caused by their gender variant appearance and behavior. All of the men in the sample shared the following features: (1) a childhood history of ridicule and ostracism from both peers and adults focused on their gender variant presentation designed to elicit gender norm compliance; (2) a lack of social support networks to assist them in coping with the stress; (3) self-destructive coping responses that began in childhood and continued into adulthood in an attempt to lessen the experience of shame; and (4) symptoms of PTSD. A treatment model utilizing cognitive-behavioral therapy and eye movement desensitization and reprocessing was discussed.

  2. X-ray Spectral Model of Reprocessing by Smooth and Clumpy Molecular Tori in Active Galactic Nuclei with the MONACO framework

    CERN Document Server

    Furui, Shun'ya; Odaka, Hirokazu; Kawaguchi, Toshihiro; Ohno, Masanori; Hayashi, Kazuma

    2016-01-01

    We construct an X-ray spectral model of reprocessing by a torus in an active galactic nucleus (AGN) with a Monte Carlo simulation framework MONACO. Two torus geometries of smooth and clumpy cases are considered and compared. In order to reproduce a Compton shoulder accurately, MONACO includes not only free electron scattering but also bound electron scattering. Raman and Reyleigh scattering are also treated, and scattering cross sections dependent on chemical states of hydrogen and helium are included. Doppler broadening by turbulence velocity can be implemented. Our model gives consistent results with other available models, such as MYTorus, except for differences due to different physical parameters and assumptions. We studied the dependence on torus parameters for Compton shoulder, and found that a intensity ratio of Compton shoulder to line core mainly depends on the column density, inclination angle, and metal abundance. For instance, an increase of metal abundance makes the Compton shoulder relatively w...

  3. Spent nuclear fuel reprocessing and international law. Germany`s obligations under international law in matters of spent fuel reprocessing and the relevant contracts concluded with France and the United Kingdom; Wiederaufarbeitung und Voelkerrecht. Die voelkerrechtlichen Verpflichtungen der Bundesrepublik Deutschland gegenueber der Franzoesischen Republik und dem Vereinigten Koenigreich auf dem Gebiet der Wiederaufarbeitung

    Energy Technology Data Exchange (ETDEWEB)

    Heintschel v. Heinegg, W. [Augsburg Univ. (Germany). Juristische Fakultaet

    1999-01-01

    The review presented is an excerpt from an expert opinion written by the author in December last year, in response to changes in nuclear energy policy announced by the new German government. The reprocessing of spent nuclear fuels from German power reactors in the reprocessing facilities of France (La Hague) and the UK (Sellafield) is not only based on contracts concluded by the German electric utilities and the French COGEMA or the British BNFL, but has been agreed as well by an exchange of diplomatic notes between the French Ministry of Foreign Affairs and the German ambassador in Paris, the German Foreign Ministry and the French ambassador as well as the British ambassador in Bonn. The article therefore first examines from the angle of international law the legal obligations binding the states involved, and Germany in particular, in matters of spent fuel reprocessing contracts. The next question arising in this context and discussed by the article is that of whether and how much indemnification can be demanded by the reprocessing companies, or their governments, resp., if Germany should discontinue spent fuel resprocessing and thus might be made liable for breach of the bilateral agreements. (orig/CB) [Deutsch] Der Beitrag enthaelt eine gekuerzte Zusammenfassung eines Gutachtens, das der Verfasser im Dezember 1998 erstellte. Anlass war die Ankuendigung der neuen deutschen Regierung, die Wiederaufarbeitung abgebrannter Kernbrennstoffe bald beenden zu wollen zugunsten der Zwischenlagerung und spaeteren Entsorgung. Die Wiederaufarbeitung deutscher Brennelemente im franzoesischen La Hague und im englischen Sellafield ist Gegenstand nicht allein der Vereinbarungen zwischen den deutschen Stromversorgern und der COGEMA sowie der BNFL, sondern auch von Notenwechseln zwischen dem franzoesischen Ministerium fuer Auswaertige Angelegenheiten und dem deutschen Botschafter in Paris, dem Auswaertigen Amt und dem franzoesischen Botschafter in Bonn, sowie dem Staatssekretaer im

  4. Technological study of electrochemical uranium fuel reprocessing in fused chloride bath; Estudo tecnologico do reprocessamento eletroquimico de combustiveis de uranio em meio de cloretos fundidos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Damaris

    2002-07-01

    This study is applied to metallic fuels recycling, concerning advanced reactor concept, which was proposed and tested in LMR type reactors. Conditions for electrochemical non-irradiated uranium fuel reprocessing in fused chloride bath in laboratory scale were established. Experimental procedures and parameters for dehydration treatment of LiCl-KCl eutectic mixture and for electrochemical study of U{sup 3+}/U system in LiCl-KCl were developed and optimized. In the voltammetric studies many working electrodes were tested. As auxiliary electrodes, graphite and stainless steels crucibles were verified, with no significant impurities inclusions in the system. Ag/AgCl in Al{sub 2}O{sub 3} with 1 w% in AgCl were used as reference electrode. The experimental set up developed for electrolyte treatment as well as for the study of the system U{sup 3+}/U in LiCl-KCl showed to be adequate and efficient. Thermogravimetric Techniques, Scanning Electron Microscopy with Energy Dispersive X-Ray Spectrometry and cyclic voltametry showed an efficient dehydration method by using HCl gas and than argon flux for 12 h. Scanning Electron Microscopy, with Energy Dispersive X-Ray Spectrometry and Inductively Coupled Plasma Emission Spectrometry and DC Arc Emission Spectrometry detected the presence of uranium in the cadmium phase. X-ray Diffraction and also Inductively Coupled Plasma Emission Spectrometry and DC Arc Emission Spectrometry were used for uranium detection in the salt phase. The obtained results for the system U{sup 3+}/U in LiCl-KCl showed the viability of the electrochemical reprocessing process based on the IFR advanced fuel cycle. (author)

  5. Toward mechanistic understanding of nuclear reprocessing chemistries by quantifying lanthanide solvent extraction kinetics via microfluidics with constant interfacial area and rapid mixing.

    Science.gov (United States)

    Nichols, Kevin P; Pompano, Rebecca R; Li, Liang; Gelis, Artem V; Ismagilov, Rustem F

    2011-10-05

    The closing of the nuclear fuel cycle is an unsolved problem of great importance. Separating radionuclides produced in a nuclear reactor is useful both for the storage of nuclear waste and for recycling of nuclear fuel. These separations can be performed by designing appropriate chelation chemistries and liquid-liquid extraction schemes, such as in the TALSPEAK process (Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes). However, there are no approved methods for the industrial scale reprocessing of civilian nuclear fuel in the United States. One bottleneck in the design of next-generation solvent extraction-based nuclear fuel reprocessing schemes is a lack of interfacial mass transfer rate constants obtained under well-controlled conditions for lanthanide and actinide ligand complexes; such rate constants are a prerequisite for mechanistic understanding of the extraction chemistries involved and are of great assistance in the design of new chemistries. In addition, rate constants obtained under conditions of known interfacial area have immediate, practical utility in models required for the scaling-up of laboratory-scale demonstrations to industrial-scale solutions. Existing experimental techniques for determining these rate constants suffer from two key drawbacks: either slow mixing or unknown interfacial area. The volume of waste produced by traditional methods is an additional, practical concern in experiments involving radioactive elements, both from disposal cost and experimenter safety standpoints. In this paper, we test a plug-based microfluidic system that uses flowing plugs (droplets) in microfluidic channels to determine absolute interfacial mass transfer rate constants under conditions of both rapid mixing and controlled interfacial area. We utilize this system to determine, for the first time, the rate constants for interfacial transfer of all lanthanides, minus promethium, plus yttrium, under TALSPEAK

  6. Insight into “Changing-look” AGN Mrk 1018 from the Fe Kα Line: The Reprocessing Gas Has Yet to Fully Respond to the Fading of the AGN

    Science.gov (United States)

    LaMassa, Stephanie M.; Yaqoob, Tahir; Kilgard, Roy

    2017-05-01

    Mrk 1018 is a “changing-look” active galactic nucleus (AGN) whose optical spectrum transitioned from a Type 1.9 to a Type 1 between 1979 and 1984, and then back to a Type 1.9 in 2015. This latest transition was accompanied by a decrease in X-ray flux. We analyze the Chandra spectra from 2010 and 2016 and NuSTAR spectra from 2016, with a careful treatment of pileup in the Chandra spectrum from 2010, and self-consistently model absorption, reflection, and Fe Kα line emission in the X-ray spectra from 2016. We demonstrate that while the 2-10 keV X-ray flux decreased by an order of magnitude (1.46{}-0.13+0.10× {10}-11-{1.31}-0.04+0.09× {10}-12 erg s-1 cm-2), the Fe Kα equivalent width (EW) increased from {0.18}-0.12+0.17 to {0.61}-0.25+0.27 keV due to a depressed AGN continuum. We jointly fit the Chandra and NuSTAR spectra from 2016 using the physically motivated MYTorus model, and find that the torus orientation is consistent with a face-on geometry and that lines of sight intersecting the torus are ruled out. While we measure no line-of-sight absorption, we do measure a column density of {N}{{H}}={5.38}-4.0+14× {10}22 cm-2 for gas out of the line of sight that reprocesses the X-ray emission. We find a high relative normalization between the Compton-scattered emission and transmitted continuum, which is indicative of time lags between the primary X-ray source and reprocessing gas. We predict that the Fe Kα line will respond to the decrease in AGN flux, which would manifest as a decrease in the Fe Kα EW.

  7. Investigation report on the facilities and disposed materials related to the abolished Tokai refinement plants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Present situations were surveyed on the slay accumulation site, raw material ore, and demolished facilities. The survey revealed demolished materials buried in a restricted area of the Institute yard, and the result of investigation was published together with further investigation plan. As a result of the investigation, the area of buried slag and ore was pinpointed. At the same time, the situation of disposal of non-radioactive equipment materials and burnt ash generated from the fuel reprocessing plant was investigated. It was confirmed then that the waste storage did not effect the neighboring environment. (H. Baba)

  8. Characterization of past and present solid waste streams from the Plutonium-Uranium Extraction Plant

    Energy Technology Data Exchange (ETDEWEB)

    Pottmeyer, J.A.; Weyns, M.I.; Lorenzo, D.S.; Vejvoda, E.J. [Los Alamos Technical Associates, Inc., NM (US); Duncan, D.R. [Westinghouse Hanford Co., Richland, WA (US)

    1993-04-01

    During the next two decades the transuranic wastes, now stored in the burial trenches and storage facilities at the Hanford Site, are to be retrieved, processed at the Waste Receiving and Processing Facility, and shipped to the Waste Isolation Pilot Plant near Carlsbad, New Mexico for final disposal. Over 7% of the transuranic waste to be retrieved for shipment to the Waste Isolation Pilot Plant has been generated at the Plutonium-Uranium Extraction (PUREX) Plant. The purpose of this report is to characterize the radioactive solid wastes generated by PUREX using process knowledge, existing records, and oral history interviews. The PUREX Plant is currently operated by the Westinghouse Hanford Company for the US Department of Energy and is now in standby status while being prepared for permanent shutdown. The PUREX Plant is a collection of facilities that has been used primarily to separate plutonium for nuclear weapons from spent fuel that had been irradiated in the Hanford Site`s defense reactors. Originally designed to reprocess aluminum-clad uranium fuel, the plant was modified to reprocess zirconium alloy clad fuel elements from the Hanford Site`s N Reactor. PUREX has provided plutonium for research reactor development, safety programs, and defense. In addition, the PUREX was used to recover slightly enriched uranium for recycling into fuel for use in reactors that generate electricity and plutonium. Section 2.0 provides further details of the PUREX`s physical plant and its operations. The PUREX Plant functions that generate solid waste are as follows: processing operations, laboratory analyses and supporting activities. The types and estimated quantities of waste resulting from these activities are discussed in detail.

  9. Material control and accountability aspects of safeguards for the USA /sup 233/U/TH fuel recycle plant

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, Jr., J. A.; McNeany, S. R.; Angelini, P.; Holder, N. D.; Abraham, L.

    1979-01-01

    Two fuel cycles are considered. The highly enriched uranium (HEU) cycle uses uranium enriched 93% in /sup 235/U as the initial fuel. The medium enriched uranium (MEU) cycle uses uranium with a /sup 235/U enrichment less than 20% as its initial fuel. In both, /sup 233/U is bred from thorium. The HEU /sup 235/U and the /sup 233/U of both cycles are recycled. The MEU /sup 235/U is retired to waste after one reactor cycle. Typical heavy metal contents of spent fuel elements from both cycles are presented. The main functional areas of the recycle plant are Shipping, Receiving, and Storage; Reprocessing; Refabrication; and Waste Treatment. A real-time materials accountability system will manage the data provided by measurements from all four areas. Simulations of material flow used in the HTGR development program are forerunners of such a system. The material control and accountability aspects of Reprocessing and Refabrication only are discussed. The proposed accountability areas are identified and the measurement techniques appropriate to various streams crossing the boundaries of the areas are identified. Special emphasis is placed on novel nondestructive methods developed for assaying solid materials containing /sup 233/U-Th. The material form, total uranium and plutonium, and activity of selected reprocessing streams are listed. The isotopics and activity of the uranium input into Refabrication are also presented.

  10. Poisonous Plants

    Science.gov (United States)

    ... Publications and Products Programs Contact NIOSH NIOSH POISONOUS PLANTS Recommend on Facebook Tweet Share Compartir Photo courtesy ... U.S. Department of Agriculture Many native and exotic plants are poisonous to humans when ingested or if ...

  11. Aquatic plants

    DEFF Research Database (Denmark)

    Madsen, T. V.; Sand-Jensen, K.

    2006-01-01

    Aquatic fl owering plants form a relatively young plant group on an evolutionary timescale. The group has developed over the past 80 million years from terrestrial fl owering plants that re-colonised the aquatic environment after 60-100 million years on land. The exchange of species between...... terrestrial and aquatic environments continues today and is very intensive along stream banks. In this chapter we describe the physical and chemical barriers to the exchange of plants between land and water....

  12. Manufacturing Plants

    Institute of Scientific and Technical Information of China (English)

    TANG YUANKAI

    2010-01-01

    @@ Sunshine, air and soil are indispensable for green plants. This might be axi-omatic but not in a plant factory. By creating a plant factory, scientists are trying to grow plants where natural elements are deficient or absent, such as deserts,islands, water surfaces, South and North poles and space, as well as in human habi-tats such as skyscrapers in modern cities.

  13. Manufacturing Plants

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    China starts to produce vegetables and fruits in a factory sunshine,air and soil are indispensable for green plants. This might be axiomatic but not in a plant factory. By creating a plant factory,scientists are trying to grow plants where natural elements are deficient or absent,such as deserts, islands,water surfaces,South and North poles and space,as well as in human habitats such as skyscrapers in modern cities.

  14. Medicinal Plants.

    Science.gov (United States)

    Phillipson, J. David

    1997-01-01

    Highlights the demand for medicinal plants as pharmaceuticals and the demand for health care treatments worldwide and the issues that arise from this. Discusses new drugs from plants, anticancer drugs, antiviral drugs, antimalarial drugs, herbal remedies, quality, safety, efficacy, and conservation of plants. Contains 30 references. (JRH)

  15. Autoluminescent plants.

    Directory of Open Access Journals (Sweden)

    Alexander Krichevsky

    Full Text Available Prospects of obtaining plants glowing in the dark have captivated the imagination of scientists and layman alike. While light emission has been developed into a useful marker of gene expression, bioluminescence in plants remained dependent on externally supplied substrate. Evolutionary conservation of the prokaryotic gene expression machinery enabled expression of the six genes of the lux operon in chloroplasts yielding plants that are capable of autonomous light emission. This work demonstrates that complex metabolic pathways of prokaryotes can be reconstructed and function in plant chloroplasts and that transplastomic plants can emit light that is visible by naked eye.

  16. Plant volatiles.

    Science.gov (United States)

    Baldwin, Ian T

    2010-05-11

    Plant volatiles are the metabolites that plants release into the air. The quantities released are not trivial. Almost one-fifth of the atmospheric CO2 fixed by land plants is released back into the air each day as volatiles. Plants are champion synthetic chemists; they take advantage of their anabolic prowess to produce volatiles, which they use to protect themselves against biotic and abiotic stresses and to provide information - and potentially disinformation - to mutualists and competitors alike. As transferors of information, volatiles have provided plants with solutions to the challenges associated with being rooted in the ground and immobile.

  17. Application of steric exclusion chromatography for the separation of degradation products of the solvent used for the reprocessing of the nuclear fuels; Application de la chromatographie d`exclusion sterique a la separation de produits de degradation du solvant du retraitement des combustibles nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Pozo, C.

    1993-08-01

    The solvent, used in France in Purex reprocessing plants at La Hague is tributylphosphate (TBP) diluted to 30% with a mixture of branched alkanes, for which the main component is branched dodecane (70%). In order to minimize volumes of organic wastes, we have to maintain Purex solvent qualities and to get rid of degradation products. The subject of this memoir concerns among all the degradation products the heaviest molecules. The separation and the identification of these products have been carried out by preparative steric exclusion chromatography, followed by the analysis of the samples by various analytical methods. An inactive residue containing heavy degradation products was prepared according to the process used in the UP3 La Hague plant. The Analysis of this residue using steric exclusion chromatography and GPC/MS methods, shows the presence of three families of compounds heavier than TBP: the ``dimers of TBP`` (provided from the addition of two molecules of TBP), the ``TBP-alkanes`` (the main molecule is the result of the addition of dodecane with TBP), and ``the functionalized TBP`` (hydroxyled TBP, nitrous TBP, nitrated TBP). Plutonium (IV) retention tests were made on the various fractions generated by steric chromatography. They showed that ``the dimers of TBP`` and ``the functionalized TBP`` families are responsible for that retention. These results confirm the good efficiency of the solvent distillation system operated in UP3 plant which allow the elimination of heavy degradation products of the solvent with the residue and then restore excellent extracting properties for the recycled solvent. (author). 35 figs., 69 refs., 15 tabs.

  18. Experience gained with the Synroc demonstration plant at ANSTO and its relevance to plutonium immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Jostsons, A.; Ridal, A.; Mercer, D.J.; Vance, E.R.L. [Australian Nuclear Science and Technology Organisation, Menai (Australia)

    1996-05-01

    The Synroc Demonstration Plant (SDP) was designed and constructed at Lucas Heights to demonstrate the feasibility of Synroc production on a commercial scale (10 kg/hr) with simulated Purex liquid HLW. Since commissioning of the SDP in 1987, over 6000 kg of Synroc has been fabricated with a range of feeds and waste loadings. The SDP utilises uniaxial hot-pressing to consolidate Synroc. Pressureless sintering and hot-isostatic pressing have also been studied at smaller scales. The results of this extensive process development have been incorporated in a conceptual design for a radioactive plant to condition HLW from a reprocessing plant with a capacity to treat 800 tpa of spent LWR fuel. Synroic containing TRU, including Pu, and fission products has been fabricated and characterised in a glove-box facility and hot cells, respectively. The extensive experience in processing of Synroc over the past 15 years is summarised and its relevance to immobilization of surplus plutonium is discussed.

  19. [Plant hormones, plant growth regulators].

    Science.gov (United States)

    Végvári, György; Vidéki, Edina

    2014-06-29

    Plants seem to be rather defenceless, they are unable to do motion, have no nervous system or immune system unlike animals. Besides this, plants do have hormones, though these substances are produced not in glands. In view of their complexity they lagged behind animals, however, plant organisms show large scale integration in their structure and function. In higher plants, such as in animals, the intercellular communication is fulfilled through chemical messengers. These specific compounds in plants are called phytohormones, or in a wide sense, bioregulators. Even a small quantity of these endogenous organic compounds are able to regulate the operation, growth and development of higher plants, and keep the connection between cells, tissues and synergy between organs. Since they do not have nervous and immume systems, phytohormones play essential role in plants' life.

  20. Determination of Zr{sup 93} and Mo{sup 93} in reprocessing effluents of spent fuels; Determination des radionucleides zirconium 93 et molybdene 93 dans des effluents de retraitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Puech, P.; Bienvenu, Ph. [CEA Cadarache, Dept. d' Entreposage et de Stockage des Dechets, 13 - Saint-Paul-lez-Durance (France)

    2001-07-01

    In this work is presented the approach undertaken and the results obtained within the context of a study carried out with COGEMA on the quantification of two long lived isotopes: {sup 93}Zr and {sup 93}Mo contained in spent fuel reprocessing units effluents. The quantity of long lived radionuclides contained in nuclear wastes is indeed a very important parameter for surface storages and a determining one for underground storages. (O.M.)

  1. AN X-RAY SPECTRAL MODEL OF REPROCESSING BY SMOOTH AND CLUMPY MOLECULAR TORI IN ACTIVE GALACTIC NUCLEI WITH THE MONACO FRAMEWORK

    Energy Technology Data Exchange (ETDEWEB)

    Furui, Shun’ya; Fukazawa, Yasushi; Ohno, Masanori; Hayashi, Kazuma [Department of Physical Science, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526 (Japan); Odaka, Hirokazu [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, 2575 Sand Hill Rd, Menlo Park, CA 94025 (United States); Kawaguchi, Toshihiro, E-mail: fukazawa@hep01.hepl.hiroshima-u.ac.jp [Department of Liberal Arts and Sciences, Sapporo Medical University, S1W17, Chuo-ku, Sapporo 060-8556 (Japan)

    2016-02-20

    We construct an X-ray spectral model of reprocessing by a torus in an active galactic nucleus (AGN) with the Monte Carlo simulation framework MONACO. Two torus geometries of smooth and clumpy cases are considered and compared. In order to reproduce a Compton shoulder accurately, MONACO includes not only free electron scattering but also bound electron scattering. Raman and Rayleigh scattering are also treated, and scattering cross sections dependent on chemical states of hydrogen and helium are included. Doppler broadening by turbulence velocity can be implemented. Our model gives results consistent with other available models, such as MYTorus, except for differences due to different physical parameters and assumptions. We studied the dependence on torus parameters for a Compton shoulder, and found that a intensity ratio of a Compton shoulder to the line core mainly depends on column density, inclination angle, and metal abundance. For instance, an increase of metal abundance makes a Compton shoulder relatively weak. Also, the shape of a Compton shoulder depends on the column density. Furthermore, these dependences become different between smooth and clumpy cases. Then, we discuss the possibility of ASTRO-H/SXS spectroscopy of Compton shoulders in AGN reflection spectra.

  2. Treating Post-traumatic Stress Disorder in patients with Multiple Sclerosis: a randomized controlled trial comparing the efficacy of Eye Movement Desensitization and Reprocessing and Relaxation Therapy.

    Directory of Open Access Journals (Sweden)

    Sara eCarletto

    2016-04-01

    Full Text Available Objective: Multiple Sclerosis (MS is a demyelinating autoimmune disease that imposes a significant emotional burden with heavy psychosocial consequences. Several studies have investigated the association between MS and mental disorders such as depression and anxiety, and recently researchers have focused also on Post-traumatic Stress Disorder (PTSD. This is the first study that investigates the usefulness of proposing a treatment for PTSD to patients with MS. Methods: A randomized controlled trial with patients with MS diagnosed with PTSD comparing Eye Movement Desensitization and Reprocessing (EMDR; n = 20 and Relaxation Therapy (RT; n = 22. The primary outcome measure was the proportion of participants that no longer meet PTSD diagnosis as measured with Clinician Administered PTSD Scale six-months after the treatment.Results: The majority of patients were able to overcome their PTSD diagnosis after only 10 therapy sessions. EMDR treatment appears to be more effective than RT in reducing the proportion of patients with MS suffering from PTSD. Both treatments are effective in reducing PTSD severity, anxiety symptoms and to improve Quality of Life (QoL. Conclusions: Although our results can only be considered preliminary, this study suggests that it is essential that PTSD symptoms are detected and that brief and cost-effective interventions to reduce PTSD and associated psychological symptoms are offered to patients, in order to help them to reduce the psychological burden associated with their neurological condition.Trail registration: NCT01743664, https://clinicaltrials.gov/ct2/show/NCT01743664

  3. Theoretical study of trivalent element complexes for the nuclear waste reprocessing; Etude theorique de complexes d'elements f trivalents pour le retraitement des dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Petit, L

    2007-10-15

    Current energetic and environmental concerns have made the nuclear waste reprocessing to be a major issue in numerous countries. One avenue to treat nuclear spent fuel requires separating selectively trivalent minor actinides An (Am{sup 3+}, Cm{sup 3+}) from lanthanides Ln. In this regard, nitrogen extractants are under study. Their selectivity toward actinides is still unclear, but could be the result of enhanced covalency effects with trivalent minor actinides with respect to lanthanides (III). In this thesis, we have performed DFT calculations (Density Functional Theory) to study covalency effects within the actinide-ligand bond, following three main axes of research: advanced study of the nature of the chemical bonding, spectroscopic characterization of covalency, and preliminary tests of ab initio molecular dynamics for future calculations in solvent. Methods that are not regularly applied to trivalent actinides complexes have been used: topological methods, TDDFT, LDDFT, ab initio molecular dynamics. We have managed to show that the selectivity of the BTP ligand - the most effective An/Ln extractant to date - comes at least for a part from stronger covalency effects within the An-BTP bond with respect to the Ln-BTP bond, which has never been proved before. (author)

  4. Eye movement desensitization and reprocessing versus cognitive-behavioral therapy for adult posttraumatic stress disorder: systematic review and meta-analysis.

    Science.gov (United States)

    Chen, Ling; Zhang, Guiqing; Hu, Min; Liang, Xia

    2015-06-01

    Posttraumatic stress disorder (PTSD) is a relatively common mental disorder, with an estimated lifetime prevalence of ∼5.7%. Eye movement desensitization and reprocessing (EMDR) and cognitive-behavioral therapy (CBT) are the most often studied and most effective psychotherapies for PTSD. However, evidence is inadequate to conclude which treatment is superior. Therefore, we conducted a meta-analysis to confirm the effectiveness of EMDR compared to CBT for adult PTSD. We searched Medline, PubMed, Ebsco, Proquest, and Cochrane (1989-2013) to identify relevant randomized control trials comparing EMDR and CBT for PTSD. We included 11 studies (N = 424). Although all the studies had methodological limitations, meta-analyses for total PTSD scores revealed that EMDR was slightly superior to CBT. Cumulative meta-analysis confirmed this and a meta-analysis for subscale scores of PTSD symptoms indicated that EMDR was better for decreased intrusion and arousal severity compared to CBT. Avoidance was not significantly different between groups. EMDR may be more suitable than CBT for PTSD patients with prominent intrusion or arousal symptoms. However, the limited number and poor quality of the original studies included suggest caution when drawing final conclusions.

  5. Reprocessable squeezing electrode fabrication of olive-like Fe/Co/O nanoparticle@three dimensional nitrogen-doped reduced graphene oxides for high performance lithium batteries.

    Science.gov (United States)

    Qi, Li-Ya; Zhang, Yi-Wei; Xin, Yue-Long; Zuo, Zi-Cheng; Wu, Bin; Zhang, Xin-Xiang; Zhou, Heng-Hui

    2015-05-07

    A one step in situ synthesis approach is developed to construct 3D nitrogen-doped reduced graphene oxides, in which olive-like multi-component metal oxides are homogeneously dispersed. The novel hybrid nanoarchitecture shows some particular properties derived from synergistic effects. The size of Fe/Co/O oxides is reduced and better controlled compared to that of individual oxides due to mutual dispersant interactions. Furthermore, the positive synergistic interaction between heterogeneous oxides and graphene nanosheets has effective control on the particle size and dispersion of nanoparticles. Taking advantage of the flexibility and the cohesiveness of graphene nanosheets, the obtained composite can be directly processed into a binder-free electrode through a unique time-saving "squeezing" process. The obtained electrode possesses a reprocessable feature, which provides possibilities for convenient storage and quick fabrication at any time and presents attractive electrochemical performance of robust long-term capability retention (562 mA h g(-1) after 300 cycles at 10 A g(-1)) and superior rate performances (1162 mA h g(-1) at 0.5 A g(-1), 737 mA h g(-1) at 5 A g(-1), and 585 mA h g(-1) at 10 A g(-1)).

  6. Internet-delivered eye movement desensitization and reprocessing (iEMDR: an open trial [v2; ref status: indexed, http://f1000r.es/zr

    Directory of Open Access Journals (Sweden)

    Jay Spence

    2013-05-01

    Full Text Available Recent research indicates internet-delivered cognitive behavioural therapy (iCBT can reduce symptoms of post traumatic stress disorder (PTSD. This study examined the efficacy of an internet-delivered treatment protocol that combined iCBT and internet-delivered eye movement desensitization and reprocessing (iEMDR, in an uncontrolled trial. Eleven of the 15 participants completed post-treatment questionnaires. Large effect sizes were found from pre-treatment to 3-month follow-up (d = 1.03 – 1.61 on clinician-assessed and self-reported measures of PTSD, anxiety and distress, with moderate effect sizes (d = 0.59 – 0.70 found on measures of depression and disability. At post-treatment, 55% of the participants no longer met criteria for PTSD and this was sustained at follow-up. Symptom worsening occurred in 3 of 15 (20% of the sample from pre- to post-treatment; however, these participants reported overall symptom improvement by follow-up. Future research directions for iEMDR are discussed.

  7. CO2, SO, Hydrates, and Other Constituents on the Trailing and Anti-Jovian Hemispheres of Europa From Reprocessed Galileo/NIMS Measurements

    Science.gov (United States)

    Hansen, G. B.; McCord, T. B.

    2007-12-01

    The Near Infrared Mapping Spectrometer observations at wavelengths 0.7-5.3 μm of the Jovian moon Europa are being repro­cessed using information gained throughout and beyond the Galileo mission. Early analysis of these reprocessed data (a global observation of the anti-Jovian and trailing hemispheres at 47 km spatial resolution) show evidence of spectral features not or only weakly apparent before (e.g., Geophys. Res. Lett., submitted). These include strong absorption bands attributed to CO2 and SO (centered near 4.25 and 4.0 μm, respectively), as well as weaker bands, such as one attributed to H2O2 (near 3.5 μm). The strong hydrate bands, including at near 1.5 and 1.95 μm, are more clearly defined. The band depth distribution of the CO2 and the most well defined hydrate bands are strongly associated with the (endogenic) dark reddish regions on the surface. The SO is not strongly correlated with the CO2, but has a similar sparse distribution. We will continue this study looking at higher spatial resolution observations and higher spectral resolution observations of the same area from the same and other orbits of Galileo.

  8. Treatment of post-traumatic stress disorder with eye movement desensitization and reprocessing: outcome is stable in 35-month follow-up.

    Science.gov (United States)

    Högberg, Göran; Pagani, Marco; Sundin, Orjan; Soares, Joaquim; Aberg-Wistedt, Anna; Tärnell, Berit; Hällström, Tore

    2008-05-30

    Post-traumatic stress disorder (PTSD) is an anxiety disorder that may follow major psychological trauma. The disorder is longstanding, even chronic, and there is a need for effective treatment. The most effective short-term treatments are cognitive behavioural therapy and eye movement desensitization and reprocessing (EMDR). Twenty subjects with chronic PTSD following occupational health hazards from "person under train" accidents or assault at work were treated with five sessions of EMDR. They were assessed with psychometric scales and diagnostic interviews before treatment, directly after treatment, at 8 months, and at 35 months after the end of Therapy. The primary outcome variable was full diagnosis of PTSD according to the DSM-IV diagnostic criteria. Results from interview-based and self-evaluation psychometric scales were used as secondary outcome variables. Immediately following treatment, the patients were divided up into two groups, initial remitters (12 of 20) and non-remitters (8 of 20). There were no drop-outs during therapy, but three patients withdrew during follow-up. The initial result was maintained at the 35-month follow-up. The secondary outcome variables also showed a significant immediate change towards normality that was stable during the long-term follow-up. After 3 years of follow-up, 83% of the initial remitters had full working capacity.

  9. Comparative Case Study of Diffusion of Eye Movement Desensitization and Reprocessing in Two Clinical Settings: Empirically Supported Treatment Status Is Not Enough.

    Science.gov (United States)

    Cook, Joan M; Biyanova, Tatyana; Coyne, James C

    2009-01-01

    An in-depth comparative case study was conducted of two attempts at diffusion of an empirically supported, but controversial, psychotherapy: eye movement desensitization and reprocessing (EMDR). One Department of Veterans Affairs (VA) treatment setting in which there was substantial uptake was compared with a second VA setting in which it was not adopted. Qualitative interviews were conducted with 10 mental health clinicians at the first site, and 19 at the second. Critical selling points for EMDR were a highly regarded champion, the observability of effects with patients, and personally experiencing its effects during a role training session. Compatibility with existing psychotherapist practices and values further allowed the therapy to become embedded in the organizational culture. At the second site, a sense that EMDR was not theoretically coherent or compelling overwhelmed other considerations, including its empirical status. Comparative studies contrasting settings in which innovative therapies are implemented versus those in which they were rejected may aid in refining theories of and strategies for dissemination.

  10. Self-esteem treatment in anxiety: A randomized controlled crossover trial of Eye Movement Desensitization and Reprocessing (EMDR) versus Competitive Memory Training (COMET) in patients with anxiety disorders.

    Science.gov (United States)

    Staring, A B P; van den Berg, D P G; Cath, D C; Schoorl, M; Engelhard, I M; Korrelboom, C W

    2016-07-01

    Little is known about treating low self-esteem in anxiety disorders. This study evaluated two treatments targeting different mechanisms: (1) Eye Movement Desensitization and Reprocessing (EMDR), which aims to desensitize negative memory representations that are proposed to maintain low self-esteem; and (2) Competitive Memory Training (COMET), which aims to activate positive representations for enhancing self-esteem. A Randomized Controlled Trial (RCT) was used with a crossover design. Group 1 received six sessions EMDR first and then six sessions COMET; group 2 vice versa. Assessments were made at baseline (T0), end of first treatment (T1), and end of second treatment (T2). Main outcome was self-esteem. We included 47 patients and performed Linear Mixed Models. COMET showed more improvements in self-esteem than EMDR: effect-sizes 1.25 versus 0.46 post-treatment. Unexpectedly, when EMDR was given first, subsequent effects of COMET were significantly reduced in comparison to COMET as the first intervention. For EMDR, sequence made no difference. Reductions in anxiety and depression were mediated by better self-esteem. COMET was associated with significantly greater improvements in self-esteem than EMDR in patients with anxiety disorders. EMDR treatment reduced the effectiveness of subsequent COMET. Improved self-esteem mediated reductions in anxiety and depression symptoms. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Internet-delivered eye movement desensitization and reprocessing (iEMDR: an open trial [v1; ref status: indexed, http://f1000r.es/8l

    Directory of Open Access Journals (Sweden)

    Jay Spence

    2013-03-01

    Full Text Available Recent research indicates internet-delivered cognitive behavioural therapy (iCBT can reduce symptoms of post traumatic stress disorder (PTSD. This study examined the efficacy of an internet-delivered treatment protocol that combined iCBT and internet-delivered eye movement desensitization and reprocessing (iEMDR, in an uncontrolled trial. Eleven of the 15 participants completed post-treatment questionnaires. Large effect sizes were found from pre-treatment to 3-month follow-up (d = 1.03 – 1.61 on clinician-assessed and self-reported measures of PTSD, anxiety and distress, with moderate effect sizes (d = 0.59 – 0.70 found on measures of depression and disability. At post-treatment, 55% of the participants no longer met criteria for PTSD and this was sustained at follow-up. Symptom worsening occurred in 3 of 15 (20% of the sample from pre- to post-treatment; however, these participants reported overall symptom improvement by follow-up. Future research directions for iEMDR are discussed.

  12. Electronic plants

    Science.gov (United States)

    Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

    2015-01-01

    The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

  13. Quality Assurance in Nuclear Power Plants; La garantia de calidad en la Centrales Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Zamarron Casinello, J. M. (CC.AA. Almaraz-Trillo); Gasca Pinilla, R. (Asociacion Nuclear Asco-Vandellos II); Sala Candela, A. (IBERDROLA); Valle Pena (NUCLENOR); Ruiz Rodriguez, C. (UNION FENOSA)

    2000-07-01

    In 1970, 10CFR50 Appendix B. Quality Assurance Criteria for Nuclear Power Plants & Fuel Reprocessing Plants, was approved in USA. This is based on 18 criteria and requires American nuclear power plants to establish as quickly as possible a Quality Assurance Program (QAP) specifying how to comply with the criteria contained in this Appendix. The Ministry of Industry required that this standard be observed in Spanish plants. In The first-generation plants (Jose Cabrera, Santa Maria de Garona and Vandellos 1), which were built before this new standard was developed, the concept of Quality Assurance has only been applied to the operating phase, whereas in second-generation plants (Almaraz, Asco3 and Cofrentes) and third-generation plants (Vandellos 2 and Trillo), the concept was applied from the very beginning of the project: design phases, construction and finally plant operation. In 1979, the IAEA publihed practical code 50-C-QA as an international reference document. It contains 13 criteria that coincide with and complement those established in Appendex B of 10CFR50. As a result, the nuclear power plants in all neighboring countries will be enforcing similar Quality Assurance criteria. (Author)

  14. Plant Behavior

    Science.gov (United States)

    Liu, Dennis W. C.

    2014-01-01

    Plants are a huge and diverse group of organisms, ranging from microscopic marine phytoplankton to enormous terrestrial trees epitomized by the giant sequoia: 300 feet tall, living 3000 years, and weighing as much as 3000 tons. For this plant issue of "CBE-Life Sciences Education," the author focuses on a botanical topic that most…

  15. Plant Behavior

    Science.gov (United States)

    Liu, Dennis W. C.

    2014-01-01

    Plants are a huge and diverse group of organisms, ranging from microscopic marine phytoplankton to enormous terrestrial trees epitomized by the giant sequoia: 300 feet tall, living 3000 years, and weighing as much as 3000 tons. For this plant issue of "CBE-Life Sciences Education," the author focuses on a botanical topic that most…

  16. Plant minichromosomes.

    Science.gov (United States)

    Birchler, James A; Graham, Nathaniel D; Swyers, Nathan C; Cody, Jon P; McCaw, Morgan E

    2016-02-01

    Plant minichromosomes have the potential for stacking multiple traits on a separate entity from the remainder of the genome. Transgenes carried on an independent chromosome would facilitate conferring many new properties to plants and using minichromosomes as genetic tools. The favored method for producing plant minichromosomes is telomere-mediated chromosomal truncation because the epigenetic nature of centromere function prevents using centromere sequences to confer the ability to organize a kinetochore when reintroduced into plant cells. Because haploid induction procedures are not always complete in eliminating one parental genome, chromosomes from the inducer lines are often present in plants that are otherwise haploid. This fact suggests that minichromosomes could be combined with doubled haploid breeding to transfer stacked traits more easily to multiple lines and to use minichromosomes for massive scale genome editing.

  17. Trauma-focused cognitive behavioral therapy or eye movement desensitization and reprocessing: what works in children with posttraumatic stress symptoms? A randomized controlled trial.

    Science.gov (United States)

    Diehle, Julia; Opmeer, Brent C; Boer, Frits; Mannarino, Anthony P; Lindauer, Ramón J L

    2015-02-01

    To prevent adverse long-term effects, children who suffer from posttraumatic stress symptoms (PTSS) need treatment. Trauma-focused cognitive behavioral therapy (TF-CBT) is an established treatment for children with PTSS. However, alternatives are important for non-responders or if TF-CBT trained therapists are unavailable. Eye movement desensitization and reprocessing (EMDR) is a promising treatment for which sound comparative evidence is lacking. The current randomized controlled trial investigates the effectiveness and efficiency of both treatments. Forty-eight children (8-18 years) were randomly assigned to eight sessions of TF-CBT or EMDR. The primary outcome was PTSS as measured with the Clinician-Administered PTSD Scale for Children and Adolescents (CAPS-CA). Secondary outcomes included parental report of child PTSD diagnosis status and questionnaires on comorbid problems. The Children's Revised Impact of Event Scale was administered during the course of treatment. TF-CBT and EMDR showed large reductions from pre- to post-treatment on the CAPS-CA (-20.2; 95% CI -12.2 to -28.1 and -20.9; 95% CI -32.7 to -9.1). The difference in reduction was small and not statistically significant (mean difference of 0.69, 95% CI -13.4 to 14.8). Treatment duration was not significantly shorter for EMDR (p = 0.09). Mixed model analysis of monitored PTSS during treatment showed a significant effect for time (p EMDR are effective and efficient in reducing PTSS in children.

  18. Efficacy of eye-movement desensitization and reprocessing for patients with posttraumatic-stress disorder: a meta-analysis of randomized controlled trials.

    Directory of Open Access Journals (Sweden)

    Ying-Ren Chen

    Full Text Available BACKGROUND: We performed the first meta-analysis of clinical studies by investigating the effects of eye-movement desensitization and reprocessing (EMDR therapy on the symptoms of posttraumatic stress disorder (PTSD, depression, anxiety, and subjective distress in PTSD patients treated during the past 2 decades. METHODS: We performed a quantitative meta-analysis on the findings of 26 randomized controlled trials of EMDR therapy for PTSD published between 1991 and 2013, which were identified through the ISI Web of Science, Embase, Cochrane Library, MEDLINE, PubMed, Scopus, PsycINFO, and the Cumulative Index to Nursing and Allied Health Literature electronic databases, among which 22, 20, 16, and 11 of the studies assessed the effects of EMDR on the symptoms of PTSD, depression, anxiety, and subjective distress, respectively, as the primary clinical outcome. RESULTS: The meta-analysis revealed that the EMDR treatments significantly reduced the symptoms of PTSD (g = -0.662; 95% confidence interval (CI: -0.887 to -0.436, depression (g = -0.643; 95% CI: -0.864 to -0.422, anxiety (g = -0.640; 95% CI: -0.890 to -0.390, and subjective distress (g = -0.956; 95% CI: -1.388 to -0.525 in PTSD patients. CONCLUSION: This study confirmed that EMDR therapy significantly reduces the symptoms of PTSD, depression, anxiety, and subjective distress in PTSD patients. The subgroup analysis indicated that a treatment duration of more than 60 min per session was a major contributing factor in the amelioration of anxiety and depression, and that a therapist with experience in conducting PTSD group therapy was a major contributing factor in the reduction of PTSD symptoms.

  19. New Evidence of Regional Geological Structures Inferred from Reprocessing and Resistivity Data Interpretation in the Chingshui-Sanshing-Hanchi Area of Southwestern Ilan County, NE Taiwan

    Directory of Open Access Journals (Sweden)

    Gong-Ruei Ho

    2014-01-01

    Full Text Available The Ilan Plain is located at the southwestern tip of the back arc basin of the Okinawa Trough, which propagates westward into the Taiwan orogen. A long discussed issue concerns whether the opening normal-fault system of the Okinawa Trough propagates and transforms into the thrust-fault system of the Taiwan orogen. We have reprocessed and inverted resistivity measurements from a series of surveys conducted in the 1970s around the Chingshui-Sanshing-Hanchi area of southwestern Ilan County. The 2D and 3D inverted resistivity images reveal the regional structures. A major conductive structure dipping toward the northwest at an angle of 30°30° - 40°40° is located at the expected site of the Niudou Fault separating the Early Miocene Szeleng and Kangkou Formations from the Lushan Formation in the Sanshing area, which dip direction of two conductive structures with a dipping angle of 50°50° - 70°70° were coinciding with the dip direction of normal faults identified from the field surveys. In addition three high-angle discontinuity structures, dipping toward the north with an angle of 60°60° - 80°80° can be identified in the resistivity profile along Hanchi. We tend to suggest these structures as the extended portions of the normal faults that have been identified under the unconsolidated sediments in the Ilan Plain. Resistivity profiles from the Chingshuichi area reveal the existence of the vertical Chingshuichi, the Dachi, and the Xiaonanauo Fault. Hot springs were found in the junction area of the Chingshuichi and the Xiaonanauo Fault. The junction region of these two fault systems is the potential Chingshui geothermal field that provides fluid geothermals from the deep.

  20. NASA/GEWEX Surface Radiation Budget: Integrated Data Product With Reprocessed Radiance, Cloud, and Meteorology Inputs, and New Surface Albedo Treatment

    Science.gov (United States)

    Cox, Stephen J.; Stackhouse, Paul W., Jr.; Gupta, Shashi K.; Mikovitz, J. Colleen; Zhang, Taiping

    2016-01-01

    The NASA/GEWEX Surface Radiation Budget (SRB) project produces shortwave and longwave surface and top of atmosphere radiative fluxes for the 1983-near present time period. Spatial resolution is 1 degree. The current release 3.0 (available at gewex-srb.larc.nasa.gov) uses the International Satellite Cloud Climatology Project (ISCCP) DX product for pixel level radiance and cloud information. This product is subsampled to 30 km. ISCCP is currently recalibrating and recomputing their entire data series, to be released as the H product, at 10km resolution. The ninefold increase in pixel number will allow SRB a higher resolution gridded product (e.g. 0.5 degree), as well as the production of pixel-level fluxes. In addition to the input data improvements, several important algorithm improvements have been made. Most notable has been the adaptation of Angular Distribution Models (ADMs) from CERES to improve the initial calculation of shortwave TOA fluxes, from which the surface flux calculations follow. Other key input improvements include a detailed aerosol history using the Max Planck Institut Aerosol Climatology (MAC), temperature and moisture profiles from HIRS, and new topography, surface type, and snow/ice. Here we present results for the improved GEWEX Shortwave and Longwave algorithm (GSW and GLW) with new ISCCP data, the various other improved input data sets and the incorporation of many additional internal SRB model improvements. As of the time of abstract submission, results from 2007 have been produced with ISCCP H availability the limiting factor. More SRB data will be produced as ISCCP reprocessing continues. The SRB data produced will be released as part of the Release 4.0 Integrated Product, recognizing the interdependence of the radiative fluxes with other GEWEX products providing estimates of the Earth's global water and energy cycle (I.e., ISCCP, SeaFlux, LandFlux, NVAP, etc.).

  1. Recovery and reprocessing of legacy geophysical data from the archives of the State Company of Geology and Mining (GEOSURV) of Iraq and Iraq Petroleum Company (IPC)

    Science.gov (United States)

    Smith, D.V.; Drenth, B.R.; Fairhead, J.D.; Lei, K.; Dark, J.A.; Al-Bassam, K.

    2011-01-01

    Aeromagnetic data belonging to the State Company of Geology and Mining of Iraq (GEOSURV) have been recovered from magnetic tapes and early paper maps. In 1974 a national airborne survey was flown by the French firm Compagnie General de Geophysique (CGG). Following the survey the magnetic data were stored on magnetic tapes within an air conditioned archive run by GEOSURV. In 1990, the power supply to the archive was cut resulting in the present-day poor condition of the tapes. Frontier Processing Company and the U.S. Geological Survey (USGS) have been able to recover over 99 percent of the original digital data from the CGG tapes. Preliminary reprocessing of the data yielded a total magnetic field anomaly map that reveals fine structures not evident in available published maps. Successful restoration of these comprehensive, high quality digital datasets obviates the need to resurvey the entire country, thereby saving considerable time and money. These data were delivered to GEOSURV in a standard format for further analysis and interpretation. A parallel effort by GETECH concentrated on recovering the legacy gravity data from the original field data sheets archived by IPC (Iraq Petroleum Company). These data have been compiled with more recent GEOSURV sponsored surveys thus allowing for the first time a comprehensive digital and unified national gravity database to be constructed with full principal facts. Figure 1 shows the final aeromagnetic and gravity data coverage of Iraq. The only part of Iraq lacking gravity and aeromagnetic data coverage is the mountainous areas of the Kurdish region of northeastern Iraq. Joint interpretation of the magnetic and gravity data will help guide future geophysical investigations by GEOSURV, whose ultimate aim is to discover economical mineral and energy resources. ?? 2011 Society of Exploration Geophysicists.

  2. Analytical Methods of Dry Reprocessing Technology for Spent Nuclear Fuel%乏燃料干法后处理研究中的分析方法

    Institute of Scientific and Technical Information of China (English)

    白雪; 常志远

    2016-01-01

    综述了几种典型的乏燃料干法后处理方法,并对其中使用的分析方法进行了总结。详细论述了干法后处理研究中的在线分析方法,包括电化学分析方法、紫外可见吸收光谱法、X射线衍射法、拉曼原位分析、EXAFS原位分析、NMR原位分析等。在线分析方法有助于对工艺料液中物质的形态及结构进行实时监测。此外,离线分析方法可作为在线方法的有效补充,根据研究对象的形态(气态、液态、固态)对一些典型的离线分析方法进行了论述。%Some typical technical routes of dry reprocessing for spent nuclear fuel were reviewed and the analytical methods used in the processes were summarized .Several methods for on‐line monitoring were demonstrated in detail ,including electroanalytical methods ,UV‐Vis absorption spectrometry ,X‐ray diffraction analysis ,in‐situ Raman spectrometry ,in‐situ EXAFS analysis and in‐situ NMR analysis .On‐line analytical methods can give real‐time information of the morphologies and structures .As the effective complementarity of on‐line analytical methods ,off‐line analytical methods were discussed based on different states of the study object ,such as the one in a gas ,solid or liquid state .

  3. A novel method for recovery of acidic sludge of used-motor oil reprocessing industries to bitumen using bentonite and SBS

    Directory of Open Access Journals (Sweden)

    Ahmad Jonidi Jafari

    2014-04-01

    Full Text Available ABSTRACT Acidic sludge is a by-product from used motor oil reprocessing industries, which thousand tons of this sludge are disposed into the environment as a hazardous waste material daily. The acidic sludge contains unsaturated compounds that are polar and asphaltene. The bitumen under certain conditions is produced from mixing of bentonite, polymer styrene – butadiene – styrene (SBS, and acidic sludge. Context and purpose: The objective of this study was the recovery of acidic sludge to bitumen using additives such as bentonite and SBS. Also, the effect of additives with different weight percentages (wt%(on the performance parameters of bitumen was evaluated. At first, spilled oil was separated from the acidic sludge by a centrifugal concentrator. Then, concentrated acidic sludge and additives were mixed in together. Finally, the performance tests were carried out to compare the quality of acidic sludge with the obtained products.The results indicated that performance parameters such as softening point (SP, weight loss, penetration degree, PI, Frass breaking point, and temperature susceptibility (TS were promoted from 37°C, 1.3%, 230 dmm, -0.07854, -5°C and 0.0451 to 54°C, 1%, 130 dmm, 2.7094, -11°C , 0.02721, respectively. According to the paired sample t-test analysis, a significant difference was found between the bentonite dosage and the improved performance parameters from concentrated acidic sludge and obtained products (pvalue ≤.001. The bentonite and SBS with 2 and 4 wt%, respectively were determined as the suitable additives in the recovery of acidic sludge to bitumen.

  4. New Evidence of Regional Geological Structures Inferred from Reprocessing and Resistivity Data Interpretation in the Chingshui-Sanshing-Hanchi Area of Southwestern Ilan County, NE Taiwan

    Directory of Open Access Journals (Sweden)

    Gong-Ruei Ho

    2014-01-01

    Full Text Available The Ilan Plain is located at the southwestern tip of the back arc basin of the Okinawa Trough, which propagates westward into the Taiwan orogen. A long discussed issue concerns whether the opening normal-fault system of the Okinawa Trough propagates and transforms into the thrust-fault system of the Taiwan orogen. We have reprocessed and inverted resistivity measurements from a series of surveys conducted in the 1970s around the Chingshui-Sanshing-Hanchi area of southwestern Ilan County. The 2D and 3D inverted resistivity images reveal the regional structures. A major conductive structure dipping toward the northwest at an angle of 30° - 40° is located at the expected site of the Niudou Fault separating the Early Miocene Szeleng and Kangkou Formations from the Lushan Formation in the Sanshing area, which dip direction of two conductive structures with a dipping angle of 50° - 70° were coinciding with the dip direction of normal faults identified from the field surveys. In addition three high-angle discontinuity structures, dipping toward the north with an angle of 60° - 80° can be identified in the resistivity profile along Hanchi. We tend to suggest these structures as the extended portions of the normal faults that have been identified under the unconsolidated sediments in the Ilan Plain. Resistivity profiles from the Chingshuichi area reveal the existence of the vertical Chingshuichi, the Dachi, and the Xiaonanauo Fault. Hot springs were found in the junction area of the Chingshuichi and the Xiaonanauo Fault. The junction region of these two fault systems is the potential Chingshui geothermal field that provides fluid geothermals from the deep.

  5. Biodegradation of radioactive organic liquid waste from spent fuel reprocessing; Biodegradacao de rejeitos radioativos liquidos organicos provenientes do reprocessamento do combustivel nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Rafael Vicente de Padua

    2008-07-01

    The research and development program in reprocessing of low burn-up spent fuel elements began in Brazil in 70's, originating the lab-scale hot cell, known as Celeste located at Nuclear and Energy Research Institute, IPEN - CNEN/SP. The program was ended at the beginning of 90's, and the laboratory was closed down. Part of the radioactive waste generated mainly from the analytical laboratories is stored waiting for treatment at the Waste Management Laboratory, and it is constituted by mixture of aqueous and organic phases. The most widely used technique for the treatment of radioactive liquid wastes is the solidification in cement matrix, due to the low processing costs and compatibility with a wide variety of wastes. However, organics are generally incompatible with cement, interfering with the hydration and setting processes, and requiring pre -treatment with special additives to stabilize or destroy them. The objective of this work can be divided in three parts: organic compounds characterization in the radioactive liquid waste; the occurrence of bacterial consortia from Pocos de Caldas uranium mine soil and Sao Sebastiao estuary sediments that are able to degrade organic compounds; and the development of a methodology to biodegrade organic compounds from the radioactive liquid waste aiming the cementation. From the characterization analysis, TBP and ethyl acetate were chosen to be degraded. The results showed that selected bacterial consortia were efficient for the organic liquid wastes degradation. At the end of the experiments the biodegradation level were 66% for ethyl acetate and 70% for the TBP. (author)

  6. Plant Macrofossils

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past vegetation and environmental change derived from plant remains large enough to be seen without a microscope (macrofossils), such as leaves, needles,...

  7. Seed planting

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes prairie seed plantings on Neal Smith National Wildlife Refuge (formerly Walnut Creek National Wildlife Refuge) between 1992 and 2009.

  8. T Plant

    Data.gov (United States)

    Federal Laboratory Consortium — Arguably the second most historic building at Hanford is the T Plant.This facility is historic in that it's the oldest remaining nuclear facility in the country that...

  9. TRANSGENIC PLANTS

    African Journals Online (AJOL)

    MANAGEMENT OF INSECT PEST RESISTANCE WHILE USING ... Stratégies to delay the development of résistance while using Bt engineered plants are many and would need to be ..... training, pesticide use patterns change, and the.

  10. Eye Movement Desensitization and Reprocessing (EMDR Versus Treatment as Usual for Non-Specific Chronic Back Pain Patients with Psychological Trauma: A Randomized Controlled Pilot Study

    Directory of Open Access Journals (Sweden)

    Andreas Gerhardt

    2016-12-01

    Full Text Available Objective: Eye-Movement-Desensitization and Reprocessing (EMDR – an evidence-based approach to eliminate emotional distress from traumatic experiences – was recently suggested for the treatment of chronic pain. Aim of this study was to estimate preliminary efficacy of a pain-focused EMDR intervention for the treatment of non-specific chronic back pain.Design: Randomized controlled pilot study.Methods: Forty non-specific chronic back pain patients reporting previous experiences of psychological trauma were consecutively recruited from outpatient tertiary-care pain centers. After baseline assessment, patients were randomized to intervention or control group (1:1. The intervention group received ten sessions standardized pain-focused EMDR in addition to treatment-as-usual. The control group received treatment-as-usual alone.The primary outcome was preliminary efficacy, measured by pain intensity, disability, and treatment satisfaction from the patients' perspective. Clinical relevance of changes was determined according to established recommendations. Assessments were conducted at the baseline, post-treatment, and at a 6-month follow-up. Intention-to-treat-analysis with last-observation-carried-forward method was used. Registered with ClinicalTrials.gov (NCT01850875.Results: Estimated effect sizes (between-group, pooled standard deviation for pain intensity and disability were d=0.79 (CI95%: 0.13, 1.42 and d=0.39 (CI95%: -0.24, 1.01 post-treatment, and d=0.50 (CI95%: 0.14, 1.12 and d=0.14 (CI95%: -0.48, 0.76 at 6-month follow-up. Evaluation on individual patient basis showed that about 50% of the patients in the intervention group improved clinically relevant and also rated their situation as clinically satisfactory improved, compared to zero patients in the control group.Conclusions: There is preliminary evidence that pain-focused EMDR might be useful for non-specific chronic back pain patients with previous experiences of psychological trauma

  11. Imagery rescripting and eye movement desensitisation and reprocessing for treatment of adults with childhood trauma-related post-traumatic stress disorder: IREM study design.

    Science.gov (United States)

    Boterhoven de Haan, Katrina L; Lee, Christopher W; Fassbinder, Eva; Voncken, Marisol J; Meewisse, Mariel; Van Es, Saskia M; Menninga, Simone; Kousemaker, Margriet; Arntz, Arnoud

    2017-05-04

    Post-traumatic stress disorder (PTSD) that originates from childhood trauma experiences can develop into a chronic condition that has lasting effects on an individual's functioning and quality of life. While there are evidence-based guidelines for treating adult onset PTSD, treatments for adults with childhood trauma-related PTSD (Ch-PTSD) are varied and subject to ongoing debate. This study will test the effectiveness of two trauma-focused treatments, imagery rescripting (ImRs) and eye movement desensitisation and reprocessing (EMDR) in participants with Ch-PTSD. Both have been found effective in treatment of adult PTSD or mixed onset PTSD and previous research indicates they are well-tolerated treatments. However, we know less about their effectiveness for treating Ch-PTSD or their underlying working mechanisms. IREM is an international multicentre randomised controlled trial involving seven sites across Australia, Germany and the Netherlands. We aim to recruit 142 participants (minimum of n = 20 per site), who will be randomly assigned to treatment condition. Assessments will be conducted before treatment until 1-year follow-up. Assessments before and after the waitlist will assess change in time only. The primary outcome measure is change in PTSD symptom severity from pre-treatment to 8-weeks post-treatment. Secondary outcome measures include change in severity of depression, anger, trauma-related cognitions, guilt, shame, dissociation and quality of life. Underlying mechanisms of treatment will be assessed on changes in vividness, valence and encapsulated belief of a worst trauma memory. Additional sub-studies will include qualitative investigation of treatment experiences from the participant and therapists' perspective, changes in memory and the impact of treatment fidelity on outcome measures. The primary aims of this study are to compare the effectiveness of EMDR and ImRs in treating Ch-PTSD and to investigate the underlying working mechanisms of the two

  12. Toxic plants

    Science.gov (United States)

    Reproductive performance is the single most important economic animal trait to the livestock industry and is reported to be 5 and 10 times more significant than carcass quality and growth traits respectively. Poisonous plants impact livestock reproductive function in a major way and have been shown...

  13. 25 years of Eye Movement Desensitization and Reprocessing (EMDR): The EMDR therapy protocol, hypotheses of its mechanism of action and a systematic review of its efficacy in the treatment of post-traumatic stress disorder.

    Science.gov (United States)

    Novo Navarro, Patricia; Landin-Romero, Ramón; Guardiola-Wanden-Berghe, Rocio; Moreno-Alcázar, Ana; Valiente-Gómez, Alicia; Lupo, Walter; García, Francisca; Fernández, Isabel; Pérez, Víctor; Amann, Benedikt L

    2016-02-11

    Eye movement desensitization and reprocessing (EMDR) is a relatively new psychotherapy that has gradually gained popularity for the treatment of post-traumatic stress disorder. In the present work, the standardised EMDR protocol is introduced, along with current hypotheses of its mechanism of action, as well as a critical review of the available literature on its clinical effectiveness in adult post-traumatic stress disorder. A systematic review of the published literature was performed using PubMed and PsycINFO databases with the keywords «eye movement desensitization and reprocessing» and «post-traumatic stress disorder» and its abbreviations «EMDR» and «PTSD». Fifteen randomised controlled trials of good methodological quality were selected. These studies compared EMDR with unspecific interventions, waiting lists, or specific therapies. Overall, the results of these studies suggest that EMDR is a useful, evidence-based tool for the treatment of post-traumatic stress disorder, in line with recent recommendations from different international health organisations.

  14. Audubon Plant Study Program.

    Science.gov (United States)

    National Audubon Society, New York, NY.

    Included are an illustrated student reader, "The Story of Plants and Flowers," an adult leaders' guide, and a large wall chart picturing 37 wildflowers and describing 23 major plant families. The student reader presents these main topics: The Plant Kingdom, The Wonderful World of Plants, Plants Without Flowers, Flowering Plants, Plants Make Food…

  15. Plant adaptogens.

    Science.gov (United States)

    Wagner, H; Nörr, H; Winterhoff, H

    1994-06-01

    The term adaptogen has not yet been accepted in medicine. This is probably due to the difficulties in discriminating adaptogenic drugs from immunostimulators, anabolic drugs, nootropic drugs, and tonics. There can be not doubt, however, that, at least in animal experiments, there are plant drugs capable of modulating distinct phases of the adaptation syndrome as defined by Seyle. These drugs either reduce stress reactions in the alarm phase or retard / prevent the exhaustion phase and thus provide a certain degree of protection against long-term stress. The small number of drugs the antistress activity of which has been proven or reported includes, among others, the plant drugs Ginseng, Eleutherococcus, Withania, Ocimum, Rhodiola, and Codonopsis. This review summarizes the major findings of pharmacological tests and human studies carried out with these drugs. Currently used assay systems allowing detection of antistress activities are also reported. At present the most likely candidates responsible for the putative antistress activity of plant drugs are special steroids, phenylprogane compounds and lignanes, respectively. Apart from influencing activities of the pituitary-adrenal axis and inducing stress proteins, many adaptogens also possess immunomodulatory and / or anabolic activities. Copyright © 1994 Gustav Fischer Verlag, Stuttgart · Jena · New York. Published by Elsevier GmbH.. All rights reserved.

  16. Stress tolerant plants

    OpenAIRE

    2014-01-01

    [EN] The invention relates to transgenic plants and methods for modulating abscisic acid (ABA) perception and signal transduction in plants. The plants find use in increasing yield in plants, particularly under abiotic stress.

  17. Plant fertilizer poisoning

    Science.gov (United States)

    Plant fertilizers and household plant foods are used to improve plant growth. Poisoning can occur if someone swallows these products. Plant fertilizers are mildly poisonous if small amounts are swallowed. ...

  18. Stress tolerant plants

    OpenAIRE

    Rubio, Vicente; Iniesto Sánchez, Elisa; Irigoyen Miguel, María Luisa

    2014-01-01

    [EN] The invention relates to transgenic plants and methods for modulating abscisic acid (ABA) perception and signal transduction in plants. The plants find use in increasing yield in plants, particularly under abiotic stress.

  19. FoU-rapport 2016 UC SYD Kulturelle udtryksformer og æstetiske læreprocesser kan i et samarbejde mellem pædagoger og lærere kvalificere og udvikle den understøttende undervisning!

    DEFF Research Database (Denmark)

    Rasmussen, Bo Morthorst; Okkels, Else Marie; Kvist, Bolette

    engagerede pædagoger og lærere er positivt optagede af deres fælles resultater og tænker, at det kunne ”Folkeskolen”, og dermed alle skoler lære noget af, naturligvis til gavn for eleverne. Baggrunden for FoU-projektet er den nye Folkeskolereform og UC SYD, Aabenraa, Haderslev og Kolding kommuners ønsker om...... at udvikle pædagog og lærersamarbejdet omkring de kulturelle og æstetiske læreprocesser i indskolingens understøttende undervisning. Udviklingsprojektet er gennemført i 2015 og involverede fire folkeskoler fra 3 kommuner, Aabenraa, Haderslev og Kolding og fire lektorer fra UC Syddanmark...

  20. Comparison of Efficacy of Eye Movement, Desensitization and Reprocessing and Cognitive Behavioral Therapy Therapeutic Methods for Reducing Anxiety and Depression of Iranian Combatant Afflicted by Post Traumatic Stress Disorder

    Science.gov (United States)

    Narimani, M.; Sadeghieh Ahari, S.; Rajabi, S.

    This research aims to determine efficacy of two therapeutic methods and compare them; Eye Movement, Desensitization and Reprocessing (EMDR) and Cognitive Behavioral Therapy (CBT) for reduction of anxiety and depression of Iranian combatant afflicted with Post traumatic Stress Disorder (PTSD) after imposed war. Statistical population of current study includes combatants afflicted with PTSD that were hospitalized in Isar Hospital of Ardabil province or were inhabited in Ardabil. These persons were selected through simple random sampling and were randomly located in three groups. The method was extended test method and study design was multi-group test-retest. Used tools include hospital anxiety and depression scale. This survey showed that exercise of EMDR and CBT has caused significant reduction of anxiety and depression.

  1. Thorium utilization program. Quarterly progress report for the period ending November 30, 1975. [Fuel element crushing, solids handling, fluidized bed combustion, aqueous separations, solvent extraction, systems design and drafting, alternative head-end reprocessing, and fuel recycle systems analysis

    Energy Technology Data Exchange (ETDEWEB)

    1975-12-31

    The development program for HTGR fuel reprocessing continues to emphasize the design and construction of a prototype head-end line. Design work on the multistage crushing system, the primary and secondary fluidized bed burners, the pneumatic transfer systems, and the ancillary fixtures for semiremote assembly and disassembly is essentially complete. Fabrication and receipt of all major components is under way, and auxiliary instrumentation and support systems are being installed. Studies of flow characteristics of granular solids in pneumatic transfer systems are continuing and data are being collected for use in design of systems for solids handling. Experimental work on the 20-cm primary fluidized bed burner verified the fines recycle operating mode in runs of greater than 24 hr. Twelve leaching runs were performed during the quarter using crushed, burned-back TRISO coated ThC/sub 2/ particles and burned-back BISO coated sol gel ThO/sub 2/ particles to examine the effect of varying the Thorex-to-thoria ratio to give product solutions ranging from 0.25M to 1M in thorium. Only minor effects were observed and reference values for facility operations were specified. Two-stage leaching runs with burned-back ThC/sub 2/ indicate there are no measurable differences in total dissolution time as compared to single-stage leaching. Bench-scale tests on oxidation of HTGR fuel boron carbide at 900/sup 0/C indicates that most if not all of the carbide will be converted to boron oxide in the fluidized bed burner. Eight solvent extraction runs were completed during the quarter. These runs represented the first cycle and second uranium cycle of the acid-Thorex flowsheet. A detailed calculation of spent fuel compositions by fuel block and particle type is being performed for better definition of process streams in a fuel reprocessing facility.

  2. Design information verification (DIV) of conditioning plant for geological repositories (SAGOR activity 3a)[Nuclear waste disposal; Security; Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Myatt, J

    1998-02-01

    Following IAEA Advisory and Consultants Group meetings in September 1988 and in May 1991 respectively an IAEA multi-national Support Programme Task was initiated to consider the 'Development of Safeguards for Final Disposal of Spent Fuel in Geological Repositories' (SAGOR). A Technical Coordination Committee (TCC) was set up with invited representatives from those Member State Support Programmes wishing to be involved. The joint programme, through the TCC, was given the task of studying the safeguards requirements in: conditioning plant (where the spent fuel is prepared for transfer to the repository); operating repositories (i.e. those in which the fuel is being emplaced); closed repositories. At the first meeting of the TCC in Washington in July 1994 the UK undertook to provide a study of the Design Information Verification (DIV) required in all three areas. For this activity the requirements, techniques and procedures for the Design Information Verification (DIV) of conditioning plant have been considered. In completing the study the findings reported for Activities 1a and 2a (descriptions of a Model Facility and Potential Diversion Paths, respectively) have been used in formulating any conclusions reached. The findings of Activity 1a show that a conditioning plant will be far simpler in concept than is a reprocessing plant. From this it must be concluded that DIV is unlikely to present any significant problems; experience based on reprocessing plant shows that it can be done both efficiently and effectively using proven techniques. In section 3.2, however, a number of valuable techniques which are currently being developed are also described. These have potential for effecting better DIV and could provide further evidence that the declared designs are (or are not) being fully complied with. More general DIV requirements are described in section 4. Like the detailed considerations mentioned above, these are no different from those already being applied

  3. Plant host finding by parasitic plants: A new perspective on plant to plant communication

    Science.gov (United States)

    Mark C. Mescher; Justin B. Runyon; Consuelo M. De Moraes

    2006-01-01

    Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-...

  4. Process for ion exchange resins from radioactive materials reprocessing plants. Procede d'immobilisation de resines echangeuses d'ions provenant des centres de retraitement des produits radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Magnin, G.; Magnin, M.F.; Aubert, V.; Jaouen, C.

    1989-06-23

    Prior to encapsulation in cement spent ion exchange resins are treated with an aqueous solution containing NO{sub 3}{sup -} and Na{sup +} ions. Nitrate ion amount is determined for saturation of all resin sites as if all the resins were anionic and sodium ion amount for on the one hand a basic pH of the medium and on the other hand the saturation of all cationic resin sites.

  5. Poinsettia plant exposure

    Science.gov (United States)

    Christmas flower poisoning; Lobster plant poisoning; Painted leaf poisoning ... Leaves, stem, sap of the poinsettia plant ... Poinsettia plant exposure can affect many parts of the body. EYES (IF DIRECT CONTACT OCCURS) Burning Redness STOMACH AND ...

  6. Teaching Plant Reproduction.

    Science.gov (United States)

    Tolman, Marvin N., Ed.; Hardy, Garry R., Ed.

    2000-01-01

    Recommends using Amaryllis hippeastrum to teach young children about plant reproduction. Provides tips for growing these plants, discusses the fast growing rate of the plant, and explains the anatomy. (YDS)

  7. Kansas Power Plants

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas Power Plants database depicts, as point features, the locations of the various types of power plant locations in Kansas. The locations of the power plants...

  8. Some Thinking of Nuclear Fuel Reprocessing/Recycling in China%关于我国核燃料后处理/再循环的一些思考

    Institute of Scientific and Technical Information of China (English)

    顾忠茂; 柴之芳

    2011-01-01

    Based on the uranium-plutonium fuel cycle,the once-through fuel cycle,closed fuel cycle for thermal reactors and closed fuel cycle for fast reactors are analyzed and compared from the view point of sustainable development of nuclear fission energy.It is pointed out that both the once-through fuel cycle and the closed fuel cycle of thermal reactor could not meet the strategic needs of sustainable development of nuclear energy and fast reactor with multi-recycling of nuclear fuel is the best option to develop the nuclear fission energy in a sustainable way.The present status and the major trend of reprocessing/recycling technologies in the world are introduced and the gap between China and the major nuclear energy countries is evaluated.Keeping the domestic situation in mind,we try to explore the general considerations of the development of nuclear fuel reprocessing/recycling technologies in China and the technical options to be taken.The key techniques to be solved and the associated supporting measures are also proposed.%本文从核裂变能可持续发展的角度,对基于铀-钚循环的核燃料循环体系中的"一次通过"循环、热堆闭式循环和快堆闭式循环的特点进行分析和比较,指出"一次通过"循环和热堆闭式循环均不能满足核能可持续发展的战略需要,快堆及核燃料多次循环才是我国核裂变能可持续发展的根本出路;介绍了国际上核燃料后处理/再循环的技术现状和主流发展趋势,指出我国在后处理/再循环技术方面与国际先进水平之间的差距;结合我国国情探讨我国核燃料后处理/再循环技术发展的总体构想和拟采取的技术路线,提出需要突破的关键技术问题和相应的配套措施。

  9. Plant Growth Regulators.

    Science.gov (United States)

    Nickell, Louis G.

    1978-01-01

    Describes the effect of "plant growth regulators" on plants, such as controlling the flowering, fruit development, plant size, and increasing crop yields. Provides a list of plant growth regulators which includes their chemical, common, and trade names, as well as their different use(s). (GA)

  10. Ethylene insensitive plants

    Science.gov (United States)

    Ecker, Joseph R.; Nehring, Ramlah; McGrath, Robert B.

    2007-05-22

    Nucleic acid and polypeptide sequences are described which relate to an EIN6 gene, a gene involved in the plant ethylene response. Plant transformation vectors and transgenic plants are described which display an altered ethylene-dependent phenotype due to altered expression of EIN6 in transformed plants.

  11. Plant Biology Science Projects.

    Science.gov (United States)

    Hershey, David R.

    This book contains science projects about seed plants that deal with plant physiology, plant ecology, and plant agriculture. Each of the projects includes a step-by-step experiment followed by suggestions for further investigations. Chapters include: (1) "Bean Seed Imbibition"; (2) "Germination Percentages of Different Types of Seeds"; (3)…

  12. Nuclear power plants and childhood leukaemia: lessons from the past and future directions.

    Science.gov (United States)

    Kuehni, C; Spycher, B D

    2014-01-01

    In the 1980s, leukaemia clusters were discovered around nuclear fuel reprocessing plants in Sellafield and Dounreay in the United Kingdom. This raised public concern about the risk of childhood leukaemia near nuclear power plants (NPPs). Since then, the topic has been well-studied, but methodological limitations make results difficult to interpret. Our review aims to: (1.) summarise current evidence on the relationship between NPPs and risk of childhood leukaemia, with a focus on the Swiss CANUPIS (Childhood cancer and nuclear power plants in Switzerland) study; (2.) discuss the limitations of previous research; and (3.) suggest directions for future research. There are various reasons that previous studies produced inconclusive results. These include: inadequate study designs and limited statistical power due to the low prevalence of exposure (living near a NPP) and outcome (leukaemia); lack of accurate exposure estimates; limited knowledge of the aetiology of childhood leukaemia, particularly of vulnerable time windows and latent periods; use of residential location at time of diagnosis only and lack of data on address histories; and inability to adjust for potential confounders. We conclude that risk of childhood leukaemia around NPPs should continue to be monitored and that study designs should be improved and standardised. Data should be pooled internationally to increase the statistical power. More research needs to be done on other putative risk factors for childhood cancer such as low-dose ionizing radiation, exposure to certain chemicals and exposure to infections. Studies should be designed to allow examining multiple exposures.

  13. JSTOR Plant Science

    OpenAIRE

    2010-01-01

    JSTOR Plant Science is an online environment that brings together content, tools, and people interested in plant science. It provides access to foundational content vital to plant science – plant type specimens, taxonomic structures, scientific literature, and related materials, making them widely accessible to the plant science community as well as to researchers in other fields and to the public. It also provides an easy to use interface with powerful functionality that su...

  14. Plant Research '75

    Energy Technology Data Exchange (ETDEWEB)

    1975-01-01

    Research is reported on stomatal regulation of the gas exchanges between plant and environment; inhibitory effects in flower formation; plant growth and development through hormones; hormone action; development and nitrogen fixation in algae; primary cell wall glycoprotein ectensin; enzymic mechanisms and control of polysaccharide and glycoprotein synthesis; molecular studies of membrane studies; sensory transduction in plants; regulation of formation of protein complexes and enzymes in higher plant cell and mechanism of sulfur dioxide toxicity in plants. (PCS)

  15. PLANT BIOPRINTING: NOVEL PERSPECTIVE FOR PLANT BIOTECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Adhityo WICAKSONO

    2015-12-01

    Full Text Available Bioprinting is a technical innovation that has revolutionized tissue engineering. Using conventional printer cartridges filled with cells as well as a suitable scaffold, major advances have been made in the biomedical field, and it is now possible to print skin, bones, blood vessels, and even organs. Unlike animal systems, the application of bioprinting in simple plant tissue cells is still in a nascent phase and has yet to be studied. One major advantage of plants is that all living parts are reprogrammable in the form of totipotent cells. Plant bioprinting may improve scientists’understanding of plant shape and morphogenesis, and could serve for the mass production of desired tissues or plants, or even the production of plant-based biomaterial for industrial uses. This perspectives paper explores these possibilities using knowledge on what is known about bioprinting in other biosystems.

  16. Pathogen Phytosensing: Plants to Report Plant Pathogens

    Directory of Open Access Journals (Sweden)

    C. Neal Stewart

    2008-04-01

    Full Text Available Real-time systems that provide evidence of pathogen contamination in crops can be an important new line of early defense in agricultural centers. Plants possess defense mechanisms to protect against pathogen attack. Inducible plant defense is controlled by signal transduction pathways, inducible promoters and cis-regulatory elements corresponding to key genes involved in defense, and pathogen-specific responses. Identified inducible promoters and cis-acting elements could be utilized in plant sentinels, or ‘phytosensors’, by fusing these to reporter genes to produce plants with altered phenotypes in response to the presence of pathogens. Here, we have employed cis-acting elements from promoter regions of pathogen inducible genes as well as those responsive to the plant defense signal molecules salicylic acid, jasmonic acid, and ethylene. Synthetic promoters were constructed by combining various regulatory elements supplemented with the enhancer elements from the Cauliflower mosaic virus (CaMV 35S promoter to increase basal level of the GUS expression. The inducibility of each synthetic promoter was first assessed in transient expression assays using Arabidopsis thaliana protoplasts and then examined for efficacy in stably transgenic Arabidopsis and tobacco plants. Histochemical and fluorometric GUS expression analyses showed that both transgenic Arabidopsis and tobacco plants responded to elicitor and phytohormone treatments with increased GUS expression when compared to untreated plants. Pathogen-inducible phytosensor studies were initiated by analyzing the sensitivity of the synthetic promoters against virus infection. Transgenic tobacco plants infected with Alfalfa mosaic virus showed an increase in GUS expression when compared to mock-inoculated control plants, whereas Tobacco mosaic virus infection caused no changes in GUS expression. Further research, using these transgenic plants against a range of different

  17. Mixer-settler runs for the evaluation of tri-iso-amyl phosphate (TiAP) as an alternate extractant to tri-n-butyl phosphate (TBP) for reprocessing applications

    Energy Technology Data Exchange (ETDEWEB)

    Suresh, A.; Sreenivasulu, B.; Jayalakshmi, S.; Subramaniam, S.; Sabharwal, K.N.; Sivaraman, N.; Nagarajan, K.; Srinivasan, T.G.; Vasudeva Rao, P.R. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2015-05-01

    As part of the studies on the development of alternate extractants for fast reactor fuel reprocessing, a mixer-settler facility for performing counter-current solvent extraction runs with radioactive materials has been set up and commissioned in our laboratory for flow sheet development experiments. Mixer-settler runs were carried out with 1.1 M TiAP/Heavy Normal Paraffin (HNP) as the solvent using the above facility to test the equipment as well as the behaviour of the solvent for continuous solvent extraction processes. Stage profile data generated for the extraction and stripping of nitric acid with TiAP based solvent have been reported. Studies carried out on the continuous counter-current extraction and stripping of U(VI) for 1.1 M TiAP/HNP-U(VI)-HNO{sub 3} system under high solvent loading conditions are also reported in this paper. Overall and stage-wise mass balance data for the above runs are also discussed.

  18. Behavior of iodine in the atmosphere-soil-plant system

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Yasuyuki; Yoshida, Satoshi; Uchida, Shigeo [National Inst. of Radiological Sciences, Hitachinaka, Ibaraki (Japan). Nakaminato Lab. Branch

    1996-12-31

    Levels and behavior of radioactive and stable iodine in the environment were studied to obtain parameter values for the assessment of {sup 129}I released from nuclear facilities. The deposition velocity (V{sub D}) of gaseous iodine from the atmosphere to rice grains (rough rice) was 0.00048 cm{sup 3} g{sup -1}s{sup -1} for CH{sub 3}I and 0.15 cm{sup 3} g{sup -1}s{sup -1} for I{sub 2}. The ratio of the iodine distribution in a grain exposed to CH{sub 3}I was as follows, rough rice : brown rice (hulled rice) : polished rice = 1.0 : 0.49 : 0.38. The distribution ratio in polished rice for CH{sub 3}I was about 20 times higher than that for I{sub 2}. The soil-solution distribution coefficient (K{sub d}) for both I{sup -} and IO{sub 3}{sup -} varied very widely, i.e. <0.1 to 8000 ml g{sup -1}. High values were found in soils having high concentrations of total organic carbon, active-Al and active-Fe (Al and Fe extracted by a mixture of oxalic acid and ammonium oxalate). Andosol, one of the most typical Japanese soils derived from deposits of volcanic ash, showed specifically high K{sub d} values. The soil-to-plant transfer factors (or concentration ratio) in the edible parts of crops were in the range 0.0002-0.016. The transfer factors for tomato, sweet potato, carrot, soybeans and rice were significantly lower than their leaf values. The value for rice (polished) was 0.002. Iodine was found to be evaporated from the soil-plant system as CH{sub 3}I. The emission of CH{sub 3}I from rice plants grown on flooded soil was much higher than that from oat plants grown on unflooded soil. The {sup 129}I levels in environmental samples collected in and around Tokai-mura, where a spent nuclear fuel reprocessing plant is located, have been determined by neutron activation analysis. The concentrations of {sup 129}I in surface soils ranged from <0.001 to 0.18 Bq kg{sup -1}. The {sup 129}I concentrations in forest soil tended to be higher than those in field soils. (Abstract Truncated)

  19. Beginning Plant Biotechnology Laboratories Using Fast Plants.

    Science.gov (United States)

    Williams, Mike

    This set of 16 laboratory activities is designed to illustrate the life cycle of Brassicae plants from seeds in pots to pods in 40 days. At certain points along the production cycle of the central core of labs, there are related lateral labs to provide additional learning opportunities employing this family of plants, referred to as "fast…

  20. Plant Phenotype Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Daniel W McDonald; Ronald B Michaels

    2005-09-09

    This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

  1. Classification of cultivated plants.

    NARCIS (Netherlands)

    Brandenburg, W.A.

    1986-01-01

    Agricultural practice demands principles for classification, starting from the basal entity in cultivated plants: the cultivar. In establishing biosystematic relationships between wild, weedy and cultivated plants, the species concept needs re-examination. Combining of botanic classification, based

  2. Plant tissue culture techniques

    Directory of Open Access Journals (Sweden)

    Rolf Dieter Illg

    1991-01-01

    Full Text Available Plant cell and tissue culture in a simple fashion refers to techniques which utilize either single plant cells, groups of unorganized cells (callus or organized tissues or organs put in culture, under controlled sterile conditions.

  3. Plant growth and cultivation.

    Science.gov (United States)

    Podar, Dorina

    2013-01-01

    There is a variety of methods used for growing plants indoor for laboratory research. In most cases plant research requires germination and growth of plants. Often, people have adapted plant cultivation protocols to the conditions and materials at hand in their own laboratory and growth facilities. Here I will provide a guide for growing some of the most frequently used plant species for research, i.e., Arabidopsis thaliana, barley (Hordeum vulgare) and rice (Oryza sativa). However, the methods presented can be used for other plant species as well, especially if they are related to the above-mentioned species. The presented methods include growing plants in soil, hydroponics, and in vitro on plates. This guide is intended as a starting point for those who are just beginning to work on any of the above-mentioned plant species. Methods presented are to be taken as suggestive and modification can be made according to the conditions existing in the host laboratory.

  4. Plant tissue culture techniques

    OpenAIRE

    Rolf Dieter Illg

    1991-01-01

    Plant cell and tissue culture in a simple fashion refers to techniques which utilize either single plant cells, groups of unorganized cells (callus) or organized tissues or organs put in culture, under controlled sterile conditions.

  5. On Plant Names.

    Science.gov (United States)

    Colton, Ronald W.

    1979-01-01

    Discusses the scientific and common names of numerous plants and the satisfaction children derive from mastering them. Includes drawings which illustrate the connections between plant structures and their names. (MA)

  6. Plant proton pumps

    DEFF Research Database (Denmark)

    Gaxiola, Roberto A.; Palmgren, Michael Gjedde; Schumacher, Karin

    2007-01-01

    Chemiosmotic circuits of plant cells are driven by proton (H+) gradients that mediate secondary active transport of compounds across plasma and endosomal membranes. Furthermore, regulation of endosomal acidification is critical for endocytic and secretory pathways. For plants to react to their co......Chemiosmotic circuits of plant cells are driven by proton (H+) gradients that mediate secondary active transport of compounds across plasma and endosomal membranes. Furthermore, regulation of endosomal acidification is critical for endocytic and secretory pathways. For plants to react...

  7. Fundaments of plant cybernetics.

    Science.gov (United States)

    Zucconi, F

    2001-01-01

    A systemic approach is proposed for analyzing plants' physiological organization and cybernesis. To this end, the plant is inspected as a system, starting from the integration of crown and root systems, and its impact on a number of basic epigenetic events. The approach proves to be axiomatic and facilitates the definition of the principles behind the plant's autonomous control of growth and reproduction.

  8. Plants of the Bayshore.

    Science.gov (United States)

    Bachle, Leo; And Others

    This field guide gives pictures and descriptions of plants that can be found along the San Francisco Bayshore, especially along the Hayward shoreline. The plants are divided into three categories, those of the mud-flat zone, the drier zone, and the levee zone. Eighteen plants are represented in all. The guide is designed to be used alone, with an…

  9. Plant Diseases & Chemicals

    OpenAIRE

    Thompson, Sherm

    2008-01-01

    This course discusses the use of chemicals for plant disease control. Specifically, pesticides that can be used both in commercial or home/yard sitautions. This course also teaches how to determine plant diseases that may have caused a plant to die.

  10. Designing with plants

    NARCIS (Netherlands)

    Smits, R.

    2012-01-01

    This "designers' manual" is made during the TIDO-course AR0531 Smart & Bioclimatic Design. Rainforests are the lungs of the earth and plants can be the lungs of a buildings. Every plant uses CO2, water and light to produce sugars and oxygen; furthermore plants provide shade, take pollutants from th

  11. Plant Systems Biology (editorial)

    Science.gov (United States)

    In June 2003, Plant Physiology published an Arabidopsis special issue devoted to plant systems biology. The intention of Natasha Raikhel and Gloria Coruzzi, the two editors of this first-of-its-kind issue, was ‘‘to help nucleate this new effort within the plant community’’ as they considered that ‘‘...

  12. Power Plant Cycling Costs

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, N.; Besuner, P.; Lefton, S.; Agan, D.; Hilleman, D.

    2012-07-01

    This report provides a detailed review of the most up to date data available on power plant cycling costs. The primary objective of this report is to increase awareness of power plant cycling cost, the use of these costs in renewable integration studies and to stimulate debate between policymakers, system dispatchers, plant personnel and power utilities.

  13. Handbook of Plant Virology

    NARCIS (Netherlands)

    Khan, J.A.; Dijkstra, J.

    2006-01-01

    The Handbook of Plant Virology is a comprehensive guide to the terms and expressions commonly used in the study of plant virology, complete with descriptions of plant virus families down to the generic level. Rather than simply listing terms in alphabetical order, this unique book links each term to

  14. Diagnosing plant problems

    Science.gov (United States)

    Cheryl A. Smith

    2008-01-01

    Diagnosing Christmas tree problems can be a challenge, requiring a basic knowledge of plant culture and physiology, the effect of environmental influences on plant health, and the ability to identify the possible causes of plant problems. Developing a solution or remedy to the problem depends on a proper diagnosis, a process that requires recognition of a problem and...

  15. Iron stress in plants.

    Science.gov (United States)

    Connolly, Erin L; Guerinot, Mary

    2002-07-30

    Although iron is an essential nutrient for plants, its accumulation within cells can be toxic. Plants, therefore, respond to both iron deficiency and iron excess by inducing expression of different gene sets. Here, we review recent advances in the understanding of iron homeostasis in plants gained through functional genomic approaches

  16. Iron stress in plants

    OpenAIRE

    Connolly, Erin L.; Guerinot, Mary Lou

    2002-01-01

    Although iron is an essential nutrient for plants, its accumulation within cells can be toxic. Plants, therefore, respond to both iron deficiency and iron excess by inducing expression of different gene sets. Here, we review recent advances in the understanding of iron homeostasis in plants gained through functional genomic approaches.

  17. Recognizing plant defense priming

    NARCIS (Netherlands)

    Martinez-Medina, A.; Flors, V.; Heil, M.; Mauch-Mani, B.; Pieterse, C.M.J.; Pozo, M.J.; Ton, J.; Van Dam, N.M.; Conrath, U.

    2016-01-01

    Defense priming conditions diverse plant species for the superinduction of defense, often resulting in enhanced pest and disease resistance and abiotic stress tolerance. Here, we propose a guideline that might assist the plant research community in a consistent assessment of defense priming in plant

  18. Estudo do reprocessamento de polietileno de baixa densidade (PEBD reciclado do processamento de extrusão de filmes tubulares Study of the reprocessing of low density polyethylene (LDPE recycled from extruded blown films

    Directory of Open Access Journals (Sweden)

    Vinicius Pistor

    2010-01-01

    Full Text Available O mercado de reciclagem para os polímeros termoplásticos encontra-se atualmente em acentuada ascensão. Os materiais reciclados são vistos como materiais de propriedades inferiores em relação ao material virgem. O presente trabalho avaliou as características viscoelásticas e térmicas do polietileno de baixa densidade (PEBD reciclado. As amostras foram reprocessadas até dez vezes em condições extremas de processamento (300 °C/80 rpm em uma extrusora monorosca, a fim de avaliar modificações estruturais nas suas propriedades. Foram realizadas análises de reometria oscilatória de placas paralelas e calorimetria exploratória de varredura (DSC. A partir das análises de reometria oscilatória foram calculados espectros de relaxação e retardação pelo programa de regularização não-linear (NLREG e através das análises de DSC no primeiro aquecimento foram calculados os parâmetros cinéticos pelos métodos de Avrami e Freeman-Carroll. Os resultados do estudo reológico demonstraram que as amostras reprocessadas acima de quatro vezes apresentaram aumento da viscosidade complexa e dos módulos de armazenamento e perda, além de fenômenos de relaxação e retardação mais largos. Entretanto, os termogramas de DSC e os parâmetros cinéticos de fusão demonstraram que o PEBD estudado manteve sua estabilidade térmica, independentemente da modificação de suas características viscoelásticas.The recycling market of thermoplastic polymers is currently in a sharp increase. Recycled materials are regarded as having inferior properties compared to the virgin material. Here we investigated the viscoelastic and thermal properties of the recycled low density polyethylene (LDPE. The samples were reprocessed up to ten times under extreme processing conditions (300 °C/80 rpm in a single screw extruder in order to evaluate structural changes in their properties. Analyses were performed in an oscillatory rheometer with parallel plates and in

  19. Plant Physiology and Development

    DEFF Research Database (Denmark)

    Taiz, Lincoln; Zeiger, Eduardo; Møller, Ian Max

    Physiology and Development. As before, Unit III begins with updated chapters on Cell Walls and Signals and Signal Transduction. The latter chapter has been expanded to include a discussion of major signaling molecules, such as calcium ions and plant hormones. A new, unified chapter entitled Signals from......Throughout its twenty-two year history, the authors of Plant Physiology have continually updated the book to incorporate the latest advances in plant biology and implement pedagogical improvements requested by adopters. This has made Plant Physiology the most authoritative, comprehensive......, and widely used upper-division plant biology textbook. In the Sixth Edition, the Growth and Development section (Unit III) has been reorganized and expanded to present the complete life cycle of seed plants from germination to senescence. In recognition of this enhancement, the text has been renamed Plant...

  20. Multinationals and plant survival

    DEFF Research Database (Denmark)

    Bandick, Roger

    2010-01-01

    The aim of this paper is twofold: first, to investigate how different ownership structures affect plant survival, and second, to analyze how the presence of foreign multinational enterprises (MNEs) affects domestic plants’ survival. Using a unique and detailed data set on the Swedish manufacturing...... sector, I am able to separate plants into those owned by foreign MNEs, domestic MNEs, exporting non-MNEs, and purely domestic firms. In line with previous findings, the result, when conditioned on other factors affecting survival, shows that foreign MNE plants have lower survival rates than non......-MNE plants. However, separating the non-MNEs into exporters and non-exporters, the result shows that foreign MNE plants have higher survival rates than non-exporting non-MNEs, while the survival rates of foreign MNE plants and exporting non-MNE plants do not seem to differ. Moreover, the simple non...

  1. Comment on "radioactive fallout in the United States due to the Fukushima nuclear plant accident" by P. Thakur, S. Ballard and R. Nelson, J. Environ. Monit., 2012, 14, 1317-1324.

    Science.gov (United States)

    Rose, Paula S

    2014-07-01

    The May 2012 paper "Radioactive fallout in the United States due to the Fukushima nuclear plant accident" (P. Thakur, S. Ballard and R. Nelson, J. Environ. Monit., 2012, 14, 1317-1324), does not address medical patient excreta as a source of (131)I (t1/2 = 8.04 d) to the environment. While (131)I is generated during fission reactions and may be released to the environment from nuclear power plants, nuclear weapons tests, nuclear fuel reprocessing and weapons production facilities, it is also produced for medical use. Iodine-131 administered to patients, excreted and discharged to sewer systems is readily measureable in sewage and the environment; the patient-to-sewage pathway is the only source of (131)I in many locations.

  2. Pharming and transgenic plants.

    Science.gov (United States)

    Liénard, David; Sourrouille, Christophe; Gomord, Véronique; Faye, Loïc

    2007-01-01

    Plant represented the essence of pharmacopoeia until the beginning of the 19th century when plant-derived pharmaceuticals were partly supplanted by drugs produced by the industrial methods of chemical synthesis. In the last decades, genetic engineering has offered an alternative to chemical synthesis, using bacteria, yeasts and animal cells as factories for the production of therapeutic proteins. More recently, molecular farming has rapidly pushed towards plants among the major players in recombinant protein production systems. Indeed, therapeutic protein production is safe and extremely cost-effective in plants. Unlike microbial fermentation, plants are capable of carrying out post-translational modifications and, unlike production systems based on mammalian cell cultures, plants are devoid of human infective viruses and prions. Furthermore, a large panel of strategies and new plant expression systems are currently developed to improve the plant-made pharmaceutical's yields and quality. Recent advances in the control of post-translational maturations in transgenic plants will allow them, in the near future, to perform human-like maturations on recombinant proteins and, hence, make plant expression systems suitable alternatives to animal cell factories.

  3. Safe genetically engineered plants

    Science.gov (United States)

    Rosellini, D.; Veronesi, F.

    2007-10-01

    The application of genetic engineering to plants has provided genetically modified plants (GMPs, or transgenic plants) that are cultivated worldwide on increasing areas. The most widespread GMPs are herbicide-resistant soybean and canola and insect-resistant corn and cotton. New GMPs that produce vaccines, pharmaceutical or industrial proteins, and fortified food are approaching the market. The techniques employed to introduce foreign genes into plants allow a quite good degree of predictability of the results, and their genome is minimally modified. However, some aspects of GMPs have raised concern: (a) control of the insertion site of the introduced DNA sequences into the plant genome and of its mutagenic effect; (b) presence of selectable marker genes conferring resistance to an antibiotic or an herbicide, linked to the useful gene; (c) insertion of undesired bacterial plasmid sequences; and (d) gene flow from transgenic plants to non-transgenic crops or wild plants. In response to public concerns, genetic engineering techniques are continuously being improved. Techniques to direct foreign gene integration into chosen genomic sites, to avoid the use of selectable genes or to remove them from the cultivated plants, to reduce the transfer of undesired bacterial sequences, and make use of alternative, safer selectable genes, are all fields of active research. In our laboratory, some of these new techniques are applied to alfalfa, an important forage plant. These emerging methods for plant genetic engineering are briefly reviewed in this work.

  4. Toxic proteins in plants.

    Science.gov (United States)

    Dang, Liuyi; Van Damme, Els J M

    2015-09-01

    Plants have evolved to synthesize a variety of noxious compounds to cope with unfavorable circumstances, among which a large group of toxic proteins that play a critical role in plant defense against predators and microbes. Up to now, a wide range of harmful proteins have been discovered in different plants, including lectins, ribosome-inactivating proteins, protease inhibitors, ureases, arcelins, antimicrobial peptides and pore-forming toxins. To fulfill their role in plant defense, these proteins exhibit various degrees of toxicity towards animals, insects, bacteria or fungi. Numerous studies have been carried out to investigate the toxic effects and mode of action of these plant proteins in order to explore their possible applications. Indeed, because of their biological activities, toxic plant proteins are also considered as potentially useful tools in crop protection and in biomedical applications, such as cancer treatment. Genes encoding toxic plant proteins have been introduced into crop genomes using genetic engineering technology in order to increase the plant's resistance against pathogens and diseases. Despite the availability of ample information on toxic plant proteins, very few publications have attempted to summarize the research progress made during the last decades. This review focuses on the diversity of toxic plant proteins in view of their toxicity as well as their mode of action. Furthermore, an outlook towards the biological role(s) of these proteins and their potential applications is discussed.

  5. Plant Communities of Rough Rock.

    Science.gov (United States)

    Jacobs, Linda

    A unit of study on plants grown in the Navajo community of Rough Rock, Arizona, is presented in sketches providing the common Navajo name for the plant, a literal English translation, the English name of the plant, and the Latin name. A brief description of each plant includes where the plant grows, how the Navajos use the plant, and the color and…

  6. Conditional sterility in plants

    Science.gov (United States)

    Meagher, Richard B.; McKinney, Elizabeth; Kim, Tehryung

    2010-02-23

    The present disclosure provides methods, recombinant DNA molecules, recombinant host cells containing the DNA molecules, and transgenic plant cells, plant tissue and plants which contain and express at least one antisense or interference RNA specific for a thiamine biosynthetic coding sequence or a thiamine binding protein or a thiamine-degrading protein, wherein the RNA or thiamine binding protein is expressed under the regulatory control of a transcription regulatory sequence which directs expression in male and/or female reproductive tissue. These transgenic plants are conditionally sterile; i.e., they are fertile only in the presence of exogenous thiamine. Such plants are especially appropriate for use in the seed industry or in the environment, for example, for use in revegetation of contaminated soils or phytoremediation, especially when those transgenic plants also contain and express one or more chimeric genes which confer resistance to contaminants.

  7. Plant synthetic biology.

    Science.gov (United States)

    Liu, Wusheng; Stewart, C Neal

    2015-05-01

    Plant synthetic biology is an emerging field that combines engineering principles with plant biology toward the design and production of new devices. This emerging field should play an important role in future agriculture for traditional crop improvement, but also in enabling novel bioproduction in plants. In this review we discuss the design cycles of synthetic biology as well as key engineering principles, genetic parts, and computational tools that can be utilized in plant synthetic biology. Some pioneering examples are offered as a demonstration of how synthetic biology can be used to modify plants for specific purposes. These include synthetic sensors, synthetic metabolic pathways, and synthetic genomes. We also speculate about the future of synthetic biology of plants.

  8. Risk-taking plants

    Science.gov (United States)

    Sade, Nir; Gebremedhin, Alem; Moshelion, Menachem

    2012-01-01

    Water scarcity is a critical limitation for agricultural systems. Two different water management strategies have evolved in plants: an isohydric strategy and an anisohydric strategy. Isohydric plants maintain a constant midday leaf water potential (Ψleaf) when water is abundant, as well as under drought conditions, by reducing stomatal conductance as necessary to limit transpiration. Anisohydric plants have more variable Ψleaf and keep their stomata open and photosynthetic rates high for longer periods, even in the presence of decreasing leaf water potential. This risk-taking behavior of anisohydric plants might be beneficial when water is abundant, as well as under moderately stressful conditions. However, under conditions of intense drought, this behavior might endanger the plant. We will discuss the advantages and disadvantages of these two water-usage strategies and their effects on the plant’s ability to tolerate abiotic and biotic stress. The involvement of plant tonoplast AQPs in this process will also be discussed. PMID:22751307

  9. Annual Plant Reviews

    DEFF Research Database (Denmark)

    , three dimensional structures and functions of each protein in a biological system. In plant science, the number of proteome studies is rapidly expanding after the completion of the Arabidopsis thaliana genome sequence, and proteome analyses of other important or emerging model systems and crop plants...... are in progress or are being initiated. Proteome analysis in plants is subject to the same obstacles and limitations as in other organisms, but the nature of plant tissues, with their rigid cell walls and complex variety of secondary metabolites, means that extra challenges are involved that may not be faced when...... analysing other organisms. This volume aims to highlight the ways in which proteome analysis has been used to probe the complexities of plant biochemistry and physiology. It is aimed at researchers in plant biochemistry, genomics, transcriptomics and metabolomics who wish to gain an up-to-date insight...

  10. Recombinant Cytokines from Plants

    OpenAIRE

    Patrycja Redkiewicz; Anna Góra-Sochacka; Tomas Vaněk; Agnieszka Sirko

    2011-01-01

    Plant-based platforms have been successfully applied for the last two decades for the efficient production of pharmaceutical proteins. The number of commercialized products biomanufactured in plants is, however, rather discouraging. Cytokines are small glycosylated polypeptides used in the treatment of cancer, immune disorders and various other related diseases. Because the clinical use of cytokines is limited by high production costs they are good candidates for plant-made pharmaceuticals. S...

  11. MBS Native Plant Communities

    Data.gov (United States)

    Minnesota Department of Natural Resources — This data layer contains results of the Minnesota County Biological Survey (MCBS). It includes polygons representing the highest quality native plant communities...

  12. The Kuroshio power plant

    CERN Document Server

    Chen, Falin

    2013-01-01

    By outlining a new design or the Kuroshio power plant, new approaches to turbine design, anchorage system planning, deep sea marine engineering and power plant operations and maintenance are explored and suggested. The impact on the local environment, particularly in the face of natural disasters, is also considered to provide a well rounded introduction to plan and build a 30MW pilot power plant. Following a literature review, the six chapters of this book propose a conceptual design by focusing on the plant's core technologies and establish the separate analysis logics for turbine design and

  13. Plant Habitat (PH)

    Science.gov (United States)

    Onate, Bryan

    2016-01-01

    The International Space Station (ISS) will soon have a platform for conducting fundamental research of Large Plants. Plant Habitat (PH) is designed to be a fully controllable environment for high-quality plant physiological research. PH will control light quality, level, and timing, temperature, CO2, relative humidity, and irrigation, while scrubbing ethylene. Additional capabilities include leaf temperature and root zone moisture and oxygen sensing. The light cap will have red (630 nm), blue (450 nm), green (525 nm), far red (730 nm) and broad spectrum white LEDs. There will be several internal cameras (visible and IR) to monitor and record plant growth and operations.

  14. Plant Transporter Identification

    DEFF Research Database (Denmark)

    Larsen, Bo

    Membrane transport proteins (transporters) play a critical role for numerous biological processes, by controlling the movements of ions and molecules in and out of cells. In plants, transporters thus function as gatekeepers between the plant and its surrounding environment and between organs......, tissues, cells and intracellular compartments. Since plants are highly compartmentalized organisms with complex transportation infrastructures, they consequently have many transporters. However, the vast majority of predicted transporters have not yet been experimentally verified to have transport...... activity. This project contains a review of the implemented methods, which have led to plant transporter identification, and present our progress on creating a high-throughput functional genomics transporter identification platform....

  15. Plant intelligence and attention.

    Science.gov (United States)

    Marder, Michael

    2013-05-01

    This article applies the phenomenological model of attention to plant monitoring of environmental stimuli and signal perception. Three complementary definitions of attention as selectivity, modulation and perdurance are explained with reference to plant signaling and behaviors, including foraging, ramet placement and abiotic stress communication. Elements of animal and human attentive attitudes are compared with plant attention at the levels of cognitive focus, context and margin. It is argued that the concept of attention holds the potential of becoming a cornerstone of plant intelligence studies.

  16. Plant Transporter Identification

    DEFF Research Database (Denmark)

    Larsen, Bo

    Membrane transport proteins (transporters) play a critical role for numerous biological processes, by controlling the movements of ions and molecules in and out of cells. In plants, transporters thus function as gatekeepers between the plant and its surrounding environment and between organs......, tissues, cells and intracellular compartments. Since plants are highly compartmentalized organisms with complex transportation infrastructures, they consequently have many transporters. However, the vast majority of predicted transporters have not yet been experimentally verified to have transport...... activity. This project contains a review of the implemented methods, which have led to plant transporter identification, and present our progress on creating a high-throughput functional genomics transporter identification platform....

  17. Explosive Formulation Pilot Plant

    Data.gov (United States)

    Federal Laboratory Consortium — The Pilot Plant for Explosive Formulation supports the development of new explosives that are comprised of several components. This system is particularly beneficial...

  18. Phyllotactic Patterns on Plants

    Science.gov (United States)

    Shipman, Patrick D.; Newell, Alan C.

    2004-04-01

    We demonstrate how phyllotaxis (the arrangement of leaves on plants) and the deformation configurations seen on plant surfaces may be understood as the energy-minimizing buckling pattern of a compressed shell (the plant's tunica) on an elastic foundation. The key new idea is that the strain energy is minimized by configurations consisting of special triads of almost periodic deformations. We reproduce a wide spectrum of plant patterns, all with the divergence angles observed in nature, and show how the occurrences of Fibonacci-like sequences and the golden angle are natural consequences.

  19. Oil from plants

    Science.gov (United States)

    Calvin, M.

    1983-01-01

    As a result of the exhaustion of our supplies of ancient photosynthesis (oil and gas) it is necessary to develop renewable fuels for the future. The most immediate source of renewable fuel is, of course, the annually growing green plants, some of which produce hydrocarbon(s) directly. New plant sources can be selected for this purpose, plants which have high potential for production of chemicals and liquid fuels. Suggestions are made for modification of both the product character and the productivity of the plants. Ultimately, a totally synthetic device will be developed for the conversion of solar quanta into useful chemical form completely independent of the need for arable land.

  20. Plant biotic interactions

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    occurring after infestation by olive fly larvae. The last research article by Niu et al.(2016) describes a growth-promoting rhizobacterium that primes induced systemic resistance by suppressing a host R gene-targeting micro RNA pairs and activating host immune responses. This finding further supports the important roles of plant endogenous small RNAs in plant-pathogen interactions. Hailing Jin, Professor Special Issue Editor UC President’s Chair Director of Genetics, Genomics and Bioinformatics Graduate Program, Center for Plant Cell Biology, Institute for Integrative Genome Biology, University of California, Riverside, USA doi:10.1111/jipb.12476 ©2016 Institute of Botany, Chinese Academy of Sciences REFERENCES Alagna F, Kal enbach M, Pompa A, De Marchis F, Rao R, Baldwin IT, Bonaventure G, Baldoni L (2016) Olive fruits infested with olive fly larvae respond with an ethylene burst and the emission of specific volatiles. J Integr Plant Biol 58:413–425 Castiblanco LF, Sundin GW (2016) New insights on molecular regulation of biofilm formation in plant-associated bacteria. J Integr Plant Biol 58:362–372 da GraSca JV, Douhan GW, Halbert SE, Keremane ML, Lee RF, Vidalakis G, Zhao H (2016) Huanglongbing: An overview of a complex pathosystem ravaging the world’s citrus. J Integr Plant Biol 58:373–387 Giovino A, Martinel i F, Saia S (2016) Rhynchophorus ferrugineus attack affects a group of compounds rather than rearranging Phoenix canariensis metabolic pathways. J Integr Plant Biol 58:388–396 Huang J, Yang M, Zhang X (2016) The function of smal RNAs in plant biotic stress response. J Integr Plant Biol 58:312–327 Kaloshian I, Wal ing LL (2016) Hemipteran and dipteran pests: Effectors and plant host immune regulators. J Integr Plant Biol 58:350–361 Mermigka G, Verret F, Kalantidis K (2016) RNA silencing movement in plants. J Integr Plant Biol 58:328–342 Niu D, Xia J, Jiang C, Qi B, Ling X, Lin S, Zhang W, Guo J, Jin H, Zhao H (2016) Bacil us cereus AR156