GASFLOW: A computational model to analyze accidents in nuclear containment and facility buildings

International Nuclear Information System (INIS)

Travis, J.R.; Nichols, B.D.; Wilson, T.L.; Lam, K.L.; Spore, J.W.; Niederauer, G.F.

1993-01-01

GASFLOW is a finite-volume computer code that solves the time-dependent, compressible Navier-Stokes equations for multiple gas species. The fluid-dynamics algorithm is coupled to the chemical kinetics of combusting liquids or gases to simulate diffusion or propagating flames in complex geometries of nuclear containment or confinement and facilities' buildings. Fluid turbulence is calculated to enhance the transport and mixing of gases in rooms and volumes that may be connected by a ventilation system. The ventilation system may consist of extensive ductwork, filters, dampers or valves, and fans. Condensation and heat transfer to walls, floors, ceilings, and internal structures are calculated to model the appropriate energy sinks. Solid and liquid aerosol behavior is simulated to give the time and space inventory of radionuclides. The solution procedure of the governing equations is a modified Los Alamos ICE'd-ALE methodology. Complex facilities can be represented by separate computational domains (multiblocks) that communicate through overlapping boundary conditions. The ventilation system is superimposed throughout the multiblock mesh. Gas mixtures and aerosols are transported through the free three-dimensional volumes and the restricted one-dimensional ventilation components as the accident and fluid flow fields evolve. Combustion may occur if sufficient fuel and reactant or oxidizer are present and have an ignition source. Pressure and thermal loads on the building, structural components, and safety-related equipment can be determined for specific accident scenarios. GASFLOW calculations have been compared with large oil-pool fire tests in the 1986 HDR containment test T52.14, which is a 3000-kW fire experiment. The computed results are in good agreement with the observed data

CFD analysis for the hydrogen transport in the primary contention of a BWR using the codes OpenFOAM and Gas-Flow

International Nuclear Information System (INIS)

Jimenez P, D. A.

2014-01-01

The accidents in Unit 2 of the Three Mile Island Nuclear Power Plant (NPP) in the United States (March 28 th , 1979), the one in Unit 4 of the NPP Chernobyl in Ukraine (April 26 th , 1986) and the explosions in some units of Fukushima NPP in Japan (March 11 th , 2011) boosted the investigations on severe accidents with core damage and, in particular, the threat to the ultimate barrier by an eventual explosion from uncontrolled Hydrogen combustion within the containment was considered of particular relevance. Research programs for analyzing Hydrogen behavior and control during this kind of accidents were early initiated by research and regulatory bodies. Assessment on Hydrogen behavior once it has been postulated to be released on the containment system can be divided into two phases, in the first one, transport and the concentrations of the gas mixtures and steam in each volume or area comprised between the structures of the containment are calculated, in the second one, the propagation of the detonation of the Hydrogen is calculated if there are the conditions to occur. Currently, there are computer programs that can be used in one, or both stages of computation, and they are based on one of the two solution methods in current use, one of them are integrated codes (e.g. MELCOR), which consists in assuming the containment as a network composed of hydraulic tanks or nodes on which the balance equations of mass and energy have to be solved, the network is connected by ducts or connections where the momentum balance equation arise. This methodology relies on the use of semi-empirical relationships and the criteria used to define a geometric pattern, are subjective. The second method, which is having relevance due to the large computing power of modern computers, is the numerical solution of the three-dimensional Navier-Stokes equations in complex geometries. This method of solution is known as Computational Fluid Dynamics (CFD), and offers the advantage of using a

Physical quantities, their role and treatment in gasflow measurement techniques

International Nuclear Information System (INIS)

Narjes, L.

1977-06-01

We begin by taking a closer look at the concepts physical quantity, dimension and unit of measurement. Then a survey is given of the physical quantities applied in gasflow measurement techniques. Here the volume-, as well as the mass-flow rate, as derived quantities are of particular interest. The application of these quantities in relation to the legal units of measurement is specifically described. In addition the quantity equation and further the quantity equation adapted to the use of suitable units and their modes of application are compared. In the appendix four examples clarify these modes. Special attention is paid to the quantity equation adapted to practically oriented units. The applications of this type of equation in VDI regulations, standards and other technical guidelines for measurement of flow are mentioned. Moreover, the meaning of the standard state for the comparison of flows of gaseous fluids is illustrated. The difficulties concerning an international agreement on uniform standard temperature are explained. Starting from there, the advantages of the fundamental quantity 'amount of substance' applied to the measurement of flow are described. The use of this quantity for the thermodynamic state of ideal and real gases, respectively gas mixtures, is demonstrated in the appendix by an example. (orig.) [de

A GASFLOW analysis of a steam explosion accident in a typical light-water reactor confinement building

International Nuclear Information System (INIS)

Travis, J.R.; Wilson, T.L.; Spore, J.W.; Lam, K.L.; Rao, D.V.

1994-01-01

Steam over-pressurization resulting from ex-vessel steam explosion (fuel-coolant interaction) may pose a serious challenge to the integrity of a typical light-water reactor confinement building. If the steam generation rate exceeds the removal capacity of the Airborne Activity Confinement System, confinement overpressurization occurs. Thus, there is a large potential for an uncontrolled and unfiltered release of fission products from the confinement atmosphere to the environment at the time of the steam explosion. The GASFLOW computer code was used to analyze the effects of a hypothetical steam explosion and the transport of steam and hydrogen throughout a typical light-water reactor confinement building. The effects of rapid pressurization and the resulting forces on the internal structures and the heat exchanger service bay hatch covers were calculated. Pressurization of the ventilation system and the potential damage to the ventilation fans and high-efficiency particulate air filters were assessed. Because of buoyancy forces and the calculated confinement velocity field, the hydrogen diffuses and mixes in the confinement atmosphere but tends to be transported to its upper region. (author). 2 refs., 14 figs

A GASFLOW analysis of a steam explosion accident in a typical light-water reactor confinement building

International Nuclear Information System (INIS)

Travis, J.R.; Wilson, T.L.; Spore, J.W.; Lam, K.L.; Rao, D.V.

1994-01-01

Steam over-pressurization resulting from ex-vessel steam explosion (fuel-coolant interaction) may pose a serious challenge to the integrity of a typical light-water reactor confinement building. If the steam generation rate exceeds the removal capacity of the Airborne Activity Confinement System, confinement over pressurization occurs. Thus, there is a large potential for an uncontrolled and unfiltered release of fission products from the confinement atmosphere to the environment at the time of the steam explosion. The GASFLOW computer code was used to analyze the effects of a hypothetical steam explosion and the transport of steam and hydrogen throughout a typical light-water reactor confinement building. The effects of rapid pressurization and the resulting forces on the internal structures and the heat exchanger service bay hatch covers were calculated. Pressurization of the ventilation system and the potential damage to the ventilation fans and high-efficiency particulate air filters were assessed. Because of buoyancy forces and the calculated confinement velocity field, the hydrogen diffuses and mixes in the confinement atmosphere but tends to be transported to its upper region

Calculations of hydrogen transport for the simulation of a Sbo in the NPP-L V using the code CFD GASFLOW; Calculos de transporte de hidrogeno para la simulacion de un SBO en la CNLV usando el codigo CFD GASFLOW

Energy Technology Data Exchange (ETDEWEB)

Gomez T, A. M.; Xolocostli M, V. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Lopez M, R.; Filio L, C.; Mugica R, C. A. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico); Royl, P., E-mail: armando.gomez@inin.gob.mx [Karlsruhe Institute of Technology, Consultor, Hermann-von-Helmholtz-Platz, D-76344 Eggenstein -Leopoldshafen, Karlsruhe (Germany)

2013-10-15

The scenario of electric power total loss in the nuclear power plant of Laguna Verde (NPP-L V) has been analyzed using the code MELCOR previously, until reaching fault conditions of the primary container. A mitigation measure to avoid the loss of the primary contention is the realization of a venting toward the secondary contention (reactor building), however this measure bears the potential explosions occurrence risk when the hydrogen accumulated in the primary container with the oxygen of the reactor building atmosphere reacting. In this work a scenario has been supposed that considers the mentioned venting when the pressure of 4.5 kg/cm{sup 2} is reached in the primary container. The information for the hydrogen like an entrance fact is obtained of the MELCOR results and the hydrogen transport in both contentions is analyzed with the code CFD GASFLOW that allows predicting the detailed distribution of the hydrogen volumetric concentration and the possible detonation of flammability conditions in the reactor building. The results show that the venting will produce detonation conditions in the venting level (level 33) and flammability in the level of the recharge floor. The methodology here described constitutes the base of a detailed calculation system of this type of phenomena that can use to make safety evaluations in the NPP-L V on scenarios that include gases transport. (Author)

Calibration of a low background gas-flow proportional counter to estimate "2"3"4Th activity in coastal waters

International Nuclear Information System (INIS)

Cuesta, E.; Lozano, R.L.; Miguel, E.G. San; Casas-Ruiz, M.; Bolívar, J.P.

2016-01-01

This paper relates the calibration of a low background gas-flow proportional counter. This calibration has been used to determine low activity of "2"3"4Th in coastal water samples. Two methods were used to prepare calibration samples: Evaporation and Electrodeposition. First method was rejected due to the lack of reproducibility because the different geometry adopted by the drops of tracer once dried on the disk. On the contrary, through the second method, similar efficiencies were obtained in all detectors with an average of 0.401±0.004. In this paper, the whole procedure to obtain "2"3"4Th activity in dissolution as well as in particulate matter has been detailed, and all the algorithms needed to calculate activities and efficiencies are shown. Finally, two experiments have been designed in order to validate the calibration of the beta counter and the method to determine "2"3"4Th in coastal waters with high concentration of particulate matter. - Highlights: • This paper shows a Home-made calibration using two methods to prepare calibration samples. • The algorithms needed to obtain Th-234 activity concentrations are described in full detail. • This is the first time Th-234 has been determined in water samples from Huelva Estuary.

Calculations of hydrogen transport for the simulation of a Sbo in the NPP-L V using the code CFD GASFLOW

International Nuclear Information System (INIS)

Gomez T, A. M.; Xolocostli M, V.; Lopez M, R.; Filio L, C.; Mugica R, C. A.; Royl, P.

2013-10-01

The scenario of electric power total loss in the nuclear power plant of Laguna Verde (NPP-L V) has been analyzed using the code MELCOR previously, until reaching fault conditions of the primary container. A mitigation measure to avoid the loss of the primary contention is the realization of a venting toward the secondary contention (reactor building), however this measure bears the potential explosions occurrence risk when the hydrogen accumulated in the primary container with the oxygen of the reactor building atmosphere reacting. In this work a scenario has been supposed that considers the mentioned venting when the pressure of 4.5 kg/cm 2 is reached in the primary container. The information for the hydrogen like an entrance fact is obtained of the MELCOR results and the hydrogen transport in both contentions is analyzed with the code CFD GASFLOW that allows predicting the detailed distribution of the hydrogen volumetric concentration and the possible detonation of flammability conditions in the reactor building. The results show that the venting will produce detonation conditions in the venting level (level 33) and flammability in the level of the recharge floor. The methodology here described constitutes the base of a detailed calculation system of this type of phenomena that can use to make safety evaluations in the NPP-L V on scenarios that include gases transport. (Author)

Analysis CFD for the hydrogen transport in the primary containment of a BWR; Analisis CFD para el transporte de hidrogeno en la contencion primaria de un reactor BWR

Energy Technology Data Exchange (ETDEWEB)

Jimenez P, D. A.; Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edificio 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Gomez T, A. M., E-mail: guerreroazteca_69@hotmail.com [ININ, Departamento de Sistemas Nucleares, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2014-10-15

This study presents a qualitative and quantitative comparison among the CFD GASFLOW and OpenFOAM codes which are related with the phenomenon of hydrogen transport and other gases in the primary containment of a Boiling Water Reactor (BWR). GASFLOW is a commercial license code that is well validated and that was developed in Germany for the analysis of the gases transport in containments of nuclear reactors. On the other hand, OpenFOAM is an open source code that offers several evaluation solvers for different types of phenomena; in this case, the solver reacting-Foam is used to analyze the hydrogen transport inside the primary containment of the BWR. The results that offer the solver reacting-Foam of OpenFOAM are evaluated in the hydrogen transport calculation and the results are compared with those of the program of commercial license GASFLOW to see if is viable the use of the open source code in the case of the hydrogen transport in the primary containment of a BWR. Of the obtained results so much quantitative as qualitative some differences were identified between both codes, the differences (with a percentage of maximum error of 4%) in the quantitative results are small and they are considered acceptable for this analysis type, also, these differences are attributed mainly to the used transport models, considering that OpenFOAM uses a homogeneous model and GASFLOW uses a heterogeneous model. (Author)

Analysis CFD for the hydrogen transport in the primary containment of a BWR

International Nuclear Information System (INIS)

Jimenez P, D. A.; Del Valle G, E.; Gomez T, A. M.

2014-10-01

This study presents a qualitative and quantitative comparison among the CFD GASFLOW and OpenFOAM codes which are related with the phenomenon of hydrogen transport and other gases in the primary containment of a Boiling Water Reactor (BWR). GASFLOW is a commercial license code that is well validated and that was developed in Germany for the analysis of the gases transport in containments of nuclear reactors. On the other hand, OpenFOAM is an open source code that offers several evaluation solvers for different types of phenomena; in this case, the solver reacting-Foam is used to analyze the hydrogen transport inside the primary containment of the BWR. The results that offer the solver reacting-Foam of OpenFOAM are evaluated in the hydrogen transport calculation and the results are compared with those of the program of commercial license GASFLOW to see if is viable the use of the open source code in the case of the hydrogen transport in the primary containment of a BWR. Of the obtained results so much quantitative as qualitative some differences were identified between both codes, the differences (with a percentage of maximum error of 4%) in the quantitative results are small and they are considered acceptable for this analysis type, also, these differences are attributed mainly to the used transport models, considering that OpenFOAM uses a homogeneous model and GASFLOW uses a heterogeneous model. (Author)

Gas Flow Validation with Panda Tests from the OECD SETH Benchmark Covering Steam/Air and Steam/Helium/Air Mixtures

International Nuclear Information System (INIS)

Royl, P.; Travis, J.R.; Breitung, W.; Kim, J.; Kim, S.B.

2009-01-01

The CFD code GASFLOW solves the time-dependent compressible Navier-Stokes Equations with multiple gas species. GASFLOW was developed for nonnuclear and nuclear applications. The major nuclear applications of GASFLOW are 3D analyses of steam/hydrogen distributions in complex PWR containment buildings to simulate scenarios of beyond design basis accidents. Validation of GASFLOW has been a continuously ongoing process together with the development of this code. This contribution reports the results from the open posttest GASFLOW calculations that have been performed for new experiments from the OECD SETH Benchmark. Discussed are the steam distribution tests 9 and 9 bis, 21 and 21 bis involving comparable sequences with and without steam condensation and the last SETH test 25 with steam/helium release and condensation. The latter one involves lighter gas mixture sources like they can result in real accidents. The helium is taken as simulant for hydrogen

Combustion modeling in waste tanks

International Nuclear Information System (INIS)

Mueller, C.; Unal, C.; Travis, J.R.; Forschungszentrum Karlsruhe

1997-01-01

This paper has two objectives. The first one is to repeat previous simulations of release and combustion of flammable gases in tank SY-101 at the Hanford reservation with the recently developed code GASFLOW-II. The GASFLOW-II results are compared with the results obtained with the HMS/TRAC code and show good agreement, especially for non-combustion cases. For combustion GASFLOW-II predicts a steeper pressure rise than HMS/TRAC. The second objective is to describe a so-called induction parameter model which was developed and implemented into GASFLOW-II and reassess previous calculations of Bureau of Mines experiments for hydrogen-air combustion. The pressure time history improves compared with the one-step model, and the time rate of pressure change is much closer to the experimental data

Hydrogen transport in the containment; Wasserstofftransport im Containment

Energy Technology Data Exchange (ETDEWEB)

Royl, P.; Mueller, C.; Travis, J.R.; Wilson, T.

1995-08-01

For the description of transport phenomena in water vapor/hydrogen mixtures released in nuclear meltdown accidents, an integrated analytical model is being developed for LWR containments. Thermal and mechanical loads due to recombination and combustion are to be calculable. The 3-dimensional GASFLOW code was taken over from LANL in exchange for HDR experimental results and Battelle BMC program results. (orig.)

Hydrogen transport in the containment

International Nuclear Information System (INIS)

Royl, P.; Mueller, C.; Travis, J.R.; Wilson, T.

1995-01-01

For the description of transport phenomena in water vapor/hydrogen mixtures released in nuclear meltdown accidents, an integrated analytical model is being developed for LWR containments. Thermal and mechanical loads due to recombination and combustion are to be calculable. The 3-dimensional GASFLOW code was taken over from LANL in exchange for HDR experimental results and Battelle BMC program results. (orig.)

Crystal structure and composition of BAlN thin films: Effect of boron concentration in the gas flow

KAUST Repository

Wang, Shuo

2017-07-20

We have investigated the microstructure of BxAl1-xN films grown by flow-modulated epitaxy at 1010 oC, with B/(B+Al) gas-flow ratios ranging from 0.06 to 0.18. The boron content obtained from X-ray diffraction (XRD) patterns ranges from x = 0.02 to 0.09. On the other hand, boron content deduced from the aluminum signal in the Rutherford backscattering spectra (RBS) ranges x = 0.06 to 0.16, closely following gas-flow ratios. Transmission electron microscopy indicates the sole presence of wurtzite crystal structure in the BAlN films, and a tendency towards columnar growth for B/(B+Al) gas-flow ratios below 0.12. For higher ratios, the BAlN films exhibit a tendency towards twin formation and finer microstructure. Electron energy loss spectroscopy has been used to profile spatial variations in the composition of the films.The RBS data suggest that the incorporation of B is highly efficient for our growth method, while the XRD data indicate that the epitaxial growth may be limited by a solubility limit in the crystal phase at about 9%, for the range of B/(B+Al) gas-flow ratios that we used, which is significantly higher than previously thought.

Crystal structure and composition of BAlN thin films: Effect of boron concentration in the gas flow

KAUST Repository

Wang, Shuo; Li, Xiaohang; Fischer, Alec M.; Detchprohm, Theeradetch; Dupuis, Russell D.; Ponce, Fernando A.

2017-01-01

We have investigated the microstructure of BxAl1-xN films grown by flow-modulated epitaxy at 1010 oC, with B/(B+Al) gas-flow ratios ranging from 0.06 to 0.18. The boron content obtained from X-ray diffraction (XRD) patterns ranges from x = 0.02 to 0.09. On the other hand, boron content deduced from the aluminum signal in the Rutherford backscattering spectra (RBS) ranges x = 0.06 to 0.16, closely following gas-flow ratios. Transmission electron microscopy indicates the sole presence of wurtzite crystal structure in the BAlN films, and a tendency towards columnar growth for B/(B+Al) gas-flow ratios below 0.12. For higher ratios, the BAlN films exhibit a tendency towards twin formation and finer microstructure. Electron energy loss spectroscopy has been used to profile spatial variations in the composition of the films.The RBS data suggest that the incorporation of B is highly efficient for our growth method, while the XRD data indicate that the epitaxial growth may be limited by a solubility limit in the crystal phase at about 9%, for the range of B/(B+Al) gas-flow ratios that we used, which is significantly higher than previously thought.

Heat transfer to a particle exposed to a rarefield ionized-gas flow

International Nuclear Information System (INIS)

Chen, X.; He, P.

1986-01-01

Analytical results are presented concerning the heat transfer to a spherical particle exposed to a high temperature, ionized- gas flow for the extreme case of free-molecule flow regime. It has been shown that the presence of relative velocity between the particle and the ionized gas reduces the floating potential on the particle, enhances the heat flux and causes appreciably non-uniform distribution of the local heat flux. Pronounced difference is found between metallic and non-metallic particles in the floating potential and the local heat flux distributions, in particular for the case with high gas-flow temperature. Relative contribution of atoms to the total heat flux is dominant for the case of low gas-flow temperature, while the heat flux is mainly caused by ions and electrons for the case of high gas-flow temperature

Analytical model for computing transient pressures and forces in the safety/relief valve discharge line. Mark I Containment Program, task number 7.1.2

International Nuclear Information System (INIS)

Wheeler, A.J.

1978-02-01

An analytical model is described that computes the transient pressures, velocities and forces in the safety/relief valve discharge line immediately after safety/relief valve opening. Equations of motion are defined for the gas-flow and water-flow models. Results are not only verified by comparing them with an earlier version of the model, but also with Quad Cities and Monticello plant data. The model shows reasonable agreement with the earlier model and the plant data

In-facility transport code review

International Nuclear Information System (INIS)

Spore, J.W.; Boyack, B.E.; Bohl, W.R.

1996-07-01

The following computer codes were reviewed by the In-Facility Transport Working Group for application to the in-facility transport of radioactive aerosols, flammable gases, and/or toxic gases: (1) CONTAIN, (2) FIRAC, (3) GASFLOW, (4) KBERT, and (5) MELCOR. Based on the review criteria as described in this report and the versions of each code available at the time of the review, MELCOR is the best code for the analysis of in-facility transport when multidimensional effects are not significant. When multi-dimensional effects are significant, GASFLOW should be used

Evaluation and Selection of a Multi-Dimensional Code for H{sub 2} Combustion and Explosion Analysis in the Containment of a Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Kang, Hyung Seok; Kim, Sangbaik; Hong, Seongwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Passive Auto-Catalytic Recombiners (PARs) were installed in all NPP containments to reduce hydrogen concentration during a severe accident. However, hydrogen combustion is possible during a severe accident if the hydrogen concentration is higher than about 10% at a local position in the containment. Thus, to assure containment integrity, it is necessary to evaluate an overpressure buildup resulting from a propagation of hydrogen flame along the obstacle and wall in the containment during a severe accident. Korea Atomic Energy Research Institute (KAERI) decided to import the computational code for the hydrogen combustion and explosion analysis from a foreign country, to establish a numerical analysis system for considering hydrogen generation in the core, to hydrogen combustion in the containment, as soon as possible. KAERI chose the COM3D as the computational code for hydrogen combustion and explosion analysis by evaluating for its numerical methods, physical models, a solver algorithm, validation and application results, and its ability to connect GASFLOW for calculating hydrogen distribution. In addition, the COM3D is currently used to evaluate the integrity of the EPR containment by predicting the overpressure buildup resulting from the hydrogen flame acceleration with the validated analysis methodology. However, we have to find a way to transfer the GASFLOW results, with a cylindrical grid model, as the initial condition of COM3D with a Cartesian grid model, because the COM3D can automatically import the GASFLOW result only when the Cartesian grid model is used, whereas KAERI has performed the GASFLOW analysis with the cylindrical grid model.

Research efforts for the resolution of hydrogen risk

Directory of Open Access Journals (Sweden)

Seong-Wan Hong

2015-02-01

Full Text Available During the past 10 years, the Korea Atomic Energy Research Institute (KAERI has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs and can provide data for the validation of the severe accident code being developed in Korea.

Research effects for the resolution of hydrogen risk

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong Wan; Kim, Jong Tae; Kang, Hyung Seok; Na, Young Su; Song, Jin Ho [Division of Severe Accident and PHWR Safety Research, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-02-15

During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

Research effects for the resolution of hydrogen risk

International Nuclear Information System (INIS)

Hong, Seong Wan; Kim, Jong Tae; Kang, Hyung Seok; Na, Young Su; Song, Jin Ho

2015-01-01

During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

Calculation of current-voltage characteristics of electron-capture detectors

International Nuclear Information System (INIS)

Hinneburg, D.; Grosse, H.J.; Leonhardt, J.; Popp, P.

1983-01-01

Starting from the law of conservation of charge a stationary one-dimensional non-linear differential equation system is derived, which is applied to the direct-current mode of an electron-capture detector with parallel electrode plates. The theory takes into account space-charge, recombination, and inhomogeneous ionization and it deals with three kinds of charge carriers with different mobilities (positive and negative ions, electrons). Terms due to diffusion and gas-flow losses are excluded. The equations so constructed were programmed to get a means of calculating the charge and field distributions and the current-voltage characteristics as functions of various parameters of the detectors, the attaching gas and the ionization. For two cases the results are given. (author)

Hydrogen mixing analyses for a VVER containment.

Energy Technology Data Exchange (ETDEWEB)

Sienicki, J.J.; Kostka, P.; Techy, Z.

2002-02-25

Hydrogen combustion may represent a threat to containment integrity in a VVER-440/213 plant owing to the combination of high pressure and high temperature. A study has been carried out using the GASFLOW 2.1 three-dimensional CFD code to evaluate the hydrogen distribution in the containment during a beyond design basis accident. The VVER-440/213 containment input model consists of two 3D blocks connected via one-dimensional (1D) ducts. One 3D block contains the reactor building and the accident localization tower with the suppression pools. Another 3D block models the air traps. 1D ducts represent the check valves connecting the accident localization tower with the air traps. The VVER pressure suppression system, called ''bubbler condenser,'' was modeled as a distributed heat sink with water thermodynamic properties. This model accounts for the energy balance. However, it is not currently possible to model dynamic phenomena associated with the water pools (e.g., vent clearing, level change). The GASFLOW 2.1 calculation gave detailed results for the spatial distribution of thermal-hydraulic parameters and gas concentrations. The range and trend of the parameters are reasonable and valuable. There are particularly interesting circulation patterns around the steam generators, in the bubbler tower and other primary system compartments. In case of the bubbler tower, concentration and temperature contour plots show an inhomogeneous distribution along the height and width, changing during the accident. Hydrogen concentrations also vary within primary system compartments displaying lower as well as higher (up to 13-20% and higher) values in some nodes. Prediction of such concentration distributions was not previously possible with lumped parameter codes. GASFLOW 2.1 calculations were compared with CONTAIN 1.2 (lumped parameter code) results. Apart from the qualitatively similar trends, there are, for the time being, quantitative differences between the

Verification of a dust transport model against theoretical solutions in multidimensional advection diffusion problems

Energy Technology Data Exchange (ETDEWEB)

Xu, Z., E-mail: zhanjie.xu@kit.ed [Forschungszentrum Karlsruhe, P.O. Box 3640, 76021 Karlsruhe (Germany); Travis, J.R. [Ingenieurbuero DuBois-Pitzer-Travis, 63071 Offenbach (Germany); Breitung, W.; Jordan, T. [Forschungszentrum Karlsruhe, P.O. Box 3640, 76021 Karlsruhe (Germany)

2010-12-15

Potentially explosive dust aerosol mobilization in the vacuum vessel is an important safety issue of the ITER facility, especially in scenarios of loss of vacuum accidents. Therefore dust mobilization modeling is ongoing in Research Center Karlsuhe. At first the aerosol particle model in the GASFLOW computer code is introduced briefly. To verify the particle model, a series of particle diffusion problems are simulated in one-, two- and three-dimensions. In each problem a particle source is initially exposed to an advective gas flow. Then a dust cloud is formed in the down stream. To obtain the theoretical solution about the particle concentration in the dust cloud, the governing diffusion partial differential equations with an additional advection term are solved by using Green's function method. Different spatial and temporal characters about the particle sources are also considered, e.g., instantaneous or continuous sources, line, or volume sources and so forth. The GASFLOW simulation results about the particle concentrations and the corresponding Green's function solutions are compared case by case. Very good agreements are found between the theoretical solutions and the GASGLOW simulations, when the drag force between the micron-sized particles and the conveying gas flow meets the Stokes' law about resistance. This situation is corresponding to a very small Reynolds number based on the particle diameter, with a negligible inertia effect of the particles. This verification work shows that the particle model of the GASFLOW code can reproduce numerically particle transport and diffusion in a good way.

Hydrogen risk reduction in Nuclear power plant

International Nuclear Information System (INIS)

Movahed, M.A.; Travis, J.R.

1999-01-01

In case of a severe accident in a nuclear power plant with core melt and hydrogen production, the hydrogen risk is one of the main concerns. It may jeopardize the containment integrity due to violent deflagration that can lead to DDT (Deflagration Detonation Transient) or even detonation of proper hydrogen mitigation means are not available. The design of the EPR (European Pressurized water Reactor) Hydrogen mitigation and control system is based on the lumped parameter code WAVCO and the 3D code GASFLOW. The concept consists of recombiners and igniters to cope with all scenarios including those without steam. The system has been checked to avoid DDT by the 7λ criteria that's implemented in GASFLOW. Future analysis could deal with determining dynamic pressure loads, if appropriate, and some sensitivity studies to check the hydrogen control measures with respect to different source locations and mass flow rates. Also a conditional criterion for determining the likelihood of fast deflagration should be developed. (author)

Reactive flow simulation in complex 3D geometries using the COM3D code

International Nuclear Information System (INIS)

Breitung, W.; Kotchourko, A.; Veser, A.; Scholtyssek, W.

1999-01-01

The COM3D code, under development at the Forschungszentrum Karlsruhe (FZK), is a 3-d CFD code to describe turbulent combustion phenomena in complex geometries. It is intended to be part of the advanced integral code system for containment analysis (INCA) which includes in addition GASFLOW for distribution calculations, V3D for slow combustion and DET3D for detonation analysis. COM3D uses a TVD-solver and optional models for turbulence, chemistry and thermodynamics. The hydrodynamic model considers mass, momentum and energy conservation. Advanced procedures were provided to facilitate grid-development for complex 3-d structures. COM3D was validated on experiments performed on different scales with generally good agreement for important physical quantities. The code was applied to combustion analysis of a large PWR. The initial conditions were obtained from a GASFLOW distribution analysis for a LOOP scenario. Results are presented concerning flame propagation and pressure evolution in the containment which clearly demonstrate the effects of internal structures, their influence on turbulence formation and consequences for local loads. (author)

Towards a biocompatible artificial lung: Covalent functionalization of poly(4-methylpent-1-ene (TPX with cRGD pentapeptide

Directory of Open Access Journals (Sweden)

Lena Möller

2013-02-01

Full Text Available Covalent multistep coating of poly(methylpentene, the membrane material in lung ventilators, by using a copper-free “click” approach with a modified cyclic RGD peptide, leads to a highly biocompatible poly(methylpentene surface. The resulting modified membrane preserves the required excellent gas-flow properties while being densely seeded with lung endothelial cells.

90Sr and 137Cs determination in milk and foodstuff samples in North and Middle Moravia

International Nuclear Information System (INIS)

Bartuskova, M.; Lusnak, J.; Rada, J.; Beckova, V.

2008-01-01

Activities of radionuclides Sr-90 and Cs-137 in milk and parts of foodstuff have been determined in National Radiation Protection Institute for many years. Sr-90 activity in those samples determinate branch Ostrava by radiochemical procedure - precipitation with oxalic acid and measuring with using gas-flow proportional detector. Gamma spectrometry with HPGe detector is using for 137 Cs determination. (authors)

Micromachined thin-film sensors for SOI-CMOS co-integration

CERN Document Server

Laconte, Jean; Raskin, Jean-Pierre

2006-01-01

Co-integration of MEMS and MOS in SOI technology is promising and well demonstrated hereThe impact of Micromachining on SOI devices is deeply analyzed for the first timeInclude extensive TMAH etching, residual stress, microheaters, gas-flow sensors reviewResidual stresses in thin films need to be more and more monitored in MEMS designsTMAH micromachining is an attractive alternative to KOH.

A study on the hydrogen behavior and its mitigation in the APR1400 containment during a severe accident

International Nuclear Information System (INIS)

Kim, Jong Tae; Hong, Seong Wan; Park, Rae Joon; Kim, Sang Baik

2005-02-01

During a hypothetical severe accident in a nuclear power plant (NPP), hydrogen is generated by the active reaction of fuel-cladding and steam in the reactor pressure vessel and released with steam into the containment. In this study, the analysis of the hydrogen and steam behavior during selected severe accidents in the APR1400 containment has been conducted by using the GASFLOW code. For the SBLOCA, hydrogen was accumulated in the containment dome region quickly when only PARSs were used. When the igniters were turned on, a standing flame was formed around a coolant pump and burnt most of the hydrogen blown-out. For the TLOFW accident, the flap-type pressure damper installed at the IRWST vents strongly affected the flow structure of the hydrogen. And by the steam-rich and oxygen starvation conditions in the IRWST, DDT is not likely to occur. For the SBO accident, dry hydrogen was release in the IRWST by the assumption of full condensation of the released steam in the IRWST water. In this case, the possibility of flame acceleration is high in the IRWST and annular compartment. In this study two design modifications were proposed in view of the hydrogen mitigation strategy and their effectiveness was evaluated by the GASFLOW analysis

Discharge characteristics and hydrodynamics behaviors of atmospheric plasma jets produced in various gas flow patterns

Science.gov (United States)

Setsuhara, Yuichi; Uchida, Giichiro; Nakajima, Atsushi; Takenaka, Kosuke; Koga, Kazunori; Shiratani, Masaharu

2015-09-01

Atmospheric nonequilibrium plasma jets have been widely employed in biomedical applications. For biomedical applications, it is an important issue to understand the complicated mechanism of interaction of the plasma jet with liquid. In this study, we present analysis of the discharge characteristics of a plasma jet impinging onto the liquid surface under various gas flow patterns such as laminar and turbulence flows. For this purpose, we analyzed gas flow patters by using a Schlieren gas-flow imaging system in detail The plasma jet impinging into the liquid surface expands along the liquid surface. The diameter of the expanded plasma increases with gas flow rate, which is well explained by an increase in the diameter of the laminar gas-flow channel. When the gas flow rate is further increased, the gas flow mode transits from laminar to turbulence in the gas flow channel, which leads to the shortening of the plasm-jet length. Our experiment demonstrated that the gas flow patterns strongly affect the discharge characteristics in the plasma-jet system. This study was partly supported by a Grant-in-Aid for Scientific Research on Innovative Areas ``Plasma Medical Innovation'' (24108003) from the Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT).

New Processing and Characterization Approaches for Achieving Full Performance of High Temperature Superconducting Tapes of (Bi,Pb)2Sr2Ca2Cu3Ox

International Nuclear Information System (INIS)

E.E. Hellstrom; D.C. Larbalestier

2006-01-01

The thrust of this research was to identify and understand current limiting mechanisms (CLMs) that limit the current carrying capacity of (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O x (2223) in Ag-sheathed wire. Our program concentrated on developing new methods to identify CLMs at the micrometer scale and new processing techniques to eliminate CLMs. All of the DOE Superconductivity Partnership Initiative (SPI) programs are using 2223 wire, so increasing the critical current density (J c ) in the wire can improve the technical performance of the demonstration projects, and at the same time it can decrease the cost of the wire. The important cost metric for superconducting wire is $/kA·m, so increasing Jc, which is in the denominator, decreases the wire cost. The obvious CLMs were micrometer size obstacles in the 2223 ceramic that block current flow, including: misaligned grains, cracks, pores, and nonsuperconducting phases. Pores and cracks--regions where there is no superconductor or the grains are not physically connected to one another--cannot carry supercurrent, so they were the first CLMs we tried to eliminate with improved processing. Prior to the contract, we had started investigating overpressure (OP) processing with Williams at ORNL to heal cracks and remove pores. OP processing, which is a variant of hot isostatic pressing (HIP), uses an Ar/O 2 gas mixture to apply a high pressure (up to 200 atm) to compress the sample and to set the oxygen partial pressure (pO 2 ) to form 2223. Williams had a static pressure system we used to demonstrate that OP processing healed cracks and densified the wire, but the static system limited the processing parameters we could investigate. We proposed building a new gas-flow OP system to expand the experimental capabilities and to investigate new processing routes using the gas-flow OP system. Using the gas-flow OP system, we established new world records in 2003 for J c and I c . These records were finally matched by Sumitomo Electric

Diffusion of zinc into an unpassivated surface of indium phosphide

International Nuclear Information System (INIS)

Budko, T.O.; Gushchinskaya, E.V.; Emelyanenko, Yu.S.; Malyshev, S.A.

1989-01-01

Peculiarities are studied of the diffusion of Zn into an unpassivated surface of InP in an open gasflow system. In the region where the carrier concentration profile is described by an erfc (error function compliment), the diffusion coefficient and activation energy are determined. It is shown that thermal processes cause changes in the charge state of Zn in InP which result in a variation of the carrier profile in the semiconductor. (author)

An easy method for the determination of Ra isotopes and actinide alpha emitters from the same water sample

International Nuclear Information System (INIS)

Moron, M.C.; Garcia-Tenorio, R.; Garcia-Montano, E.; Garcia-Leon, M.; Madurga, G.

1986-01-01

Radium isotopes and actinide α emitters are easily determined from the same water sample. The Ra fraction is obtained by coprecipitation with Ba, while a Fe coprecipitation is used for the actinides. Both fractions are measured with a gas-flow proportional counter. Additionally the isotopic Ra composition is obtained by measuring at two or three different times the α activity from the Ra-fraction. The method is applied to rain water and drinking water samples. (author)

Multibreath alveolar oxygen tension imaging.

Science.gov (United States)

Clapp, Justin; Hamedani, Hooman; Kadlecek, Stephen; Xin, Yi; Shaghaghi, Hoora; Siddiqui, Sarmad; Rossman, Milton D; Rizi, Rahim R

2016-10-01

This study tested the ability of a multibreath hyperpolarized HP (3) He MRI protocol to increase the accuracy of regional alveolar oxygen tension (PA O2 ) measurements by lessening the influence of gas-flow artifacts. Conventional single-breath PA O2 measurement has been susceptible to error induced by intervoxel gas flow, particularly when used to study subjects with moderate-to-severe chronic obstructive pulmonary disease (COPD). Both single-breath and multibreath PA O2 imaging schemes were implemented in seven human subjects (one healthy, three asymptomatic smokers, and three COPD). The number and location of voxels with nonphysiologic PA O2 values generated by intervoxel gas flow were compared between the two protocols. The multibreath scheme resulted in a significantly lower total percentage of nonphysiologic PA O2 values (6.0%) than the single-breath scheme (13.7%) (P = 0.006). PA O2 maps showed several patterns of gas-flow artifacts that were present in the single-breath protocol but mitigated by the multibreath approach. Multibreath imaging also allowed for the analysis of slow-filling areas that presented no signal after a single breath. A multibreath approach enhances the accuracy and completeness of noninvasive PA O2 measurement by significantly lessening the proportion of nonphysiologic values generated by intervoxel gas flow. Magn Reson Med 76:1092-1101, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

The UNDP/World Bank monitoring program on small scale biomass gasifiers (BTG's experience on tar measurements)

Energy Technology Data Exchange (ETDEWEB)

Knoef, H.A.M. [Biomass Technology Group BTG, Enschede (Netherlands)

2000-07-01

By the time that small-scale biomass gasifiers were 'rediscovered' and promoted for use in developing countries (1970s), UNDP and the World Bank were well aware of the pitfalls of previous attempts to diffuse decentralized energy technologies. Therefore they decided to initiate a technology assessment programme before endorsing and/or stimulating a widespread gasifier introduction programme in developing countries. On July 1, 1983, the UNDP/WB worldwide Small-scale biomass gasifier monitoring was initiated, which was to {sup c}ollect uniform data on the actual field performance, economics, safety and public acceptability of biomass gasifiers currently operating in developing countries{sup .} For the UNDP/WB program BTG developed a tar measuring protocol which was used at twenty gasifiers worldwide (Indonesia, Philippines, Brazil, Mali, Seychelles, Vanuatu and Burundi). Other parameters monitored include pressure and temperatures at various spots, gasflow, fuel consumption, lubrication oil analyses, gas-composition analyses, emission measurements. The seven year programme showed that most of donor funded projects failed, mainly because there was not sufficient commitment from involved parties. National programs on the utilization of loca available biomass resources mostly failed because the fuel did not suit the requirements of gasifier reactor. In case of proper project design/set-up most of the small scale biomass gasifiers operated without major problems. Examples of such projects are the ones in Balong and Majalengka (Indonesia) Onesua (Vanuatu), Espara Feliz (Brazil) and Dogofiry (Mali). A motivated team of technicians, operators, managers is one the most important items within this respect. Most of the heat gasifiers are installed commercially and are much more successful compared to the subsidized power gasifiers. Local manufactured gasifiers are generally constructed of low quality materials causing frequent technical problems. However, locally

Calculation of gas-flow in plasma reactor for carbon partial oxidation

Science.gov (United States)

Bespala, Evgeny; Myshkin, Vyacheslav; Novoselov, Ivan; Pavliuk, Alexander; Makarevich, Semen; Bespala, Yuliya

2018-03-01

The paper discusses isotopic effects at carbon oxidation in low temperature non-equilibrium plasma at constant magnetic field. There is described routine of experiment and defined optimal parameters ensuring maximum enrichment factor at given electrophysical, gas-dynamic, and thermodymanical parameters. It has been demonstrated that at high-frequency generator capacity of 4 kW, supply frequency of 27 MHz and field density of 44 mT the concentration of paramagnetic heavy nuclei 13C in gaseous phase increases up to 1.78 % compared to 1.11 % for natural concentration. Authors explain isotopic effect decrease during plasmachemical separation induced by mixing gas flows enriched in different isotopes at the lack of product quench. With the help of modeling the motion of gas flows inside the plasma-chemical reactor based on numerical calculation of Navier-Stokes equation authors determine zones of gas mixing and cooling speed. To increase isotopic effects and proportion of 13C in gaseous phase it has been proposed to use quench in the form of Laval nozzle of refractory steel. The article represents results on calculation of optimal Laval Nozzle parameters for plasma-chemical reactor of chosen geometry of. There are also given dependences of quench time of products on pressure at the diffuser output and on critical section diameter. Authors determine the location of quench inside the plasma-chemical reactor in the paper.

GASFLOW simulations for containment venting system of Emsland nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Xu, Zhanjie; Jordan, Thomas

2015-07-01

In a hypothetical core melt severe accident in nuclear power plants, a large amount of burnable gas, such as hydrogen and carbon monoxide, with certain amount of oxygen is released into the containment. In case of high containment pressure a filtered venting is designed as a mitigation measure. After aerosols and condensable portions of the gas mixture from the containment are purged, the remaining burnable gases flows into a chamber connected to horizontal venting pipes and further to a vertical stack, which is open to free atmosphere at the top. The main goal of the study is to investigate the chemical sensitivity of the burnable and potentially detonable gas mixture in the venting system by means of computational fluid dynamic computer simulations. Based on the calculations with different boundary conditions for different scenarios, it is concluded that the venting system has no risk of flame acceleration and detonation if the power supply of the ventilation fans can be maintained. In case of station blackout, the whole system has no risk of detonation if the scrubber - purging water pool - can get boiling in 10 minutes, owing to the heating effect resulted from the latent heat of the condensable gases into the water pool. It is because the injected steam from the boiling scrubber inerts the mixture of hydrogen, carbon monoxide plus oxygen, effectively and significantly. In this case, a gas mixture only in a very local region in the stack, as small as about 0.16 cubic meter, is in a risk of flame acceleration. It is in principle ignorable owing to the tiny volume and thus only a small amount of hydrogen and carbon monoxide.

Analytical Solution for Fractional Derivative Gas-Flow Equation in Porous Media

KAUST Repository

El-Amin, Mohamed; Radwan, Ahmed G.; Sun, Shuyu

2017-01-01

In this paper, we introduce an analytical solution of the fractional derivative gas transport equation using the power-series technique. We present a new universal transform, namely, generalized Boltzmann change of variable which depends on the fractional order, time and space. This universal transform is employed to transfer the partial differential equation into an ordinary differential equation. Moreover, the convergence of the solution has been investigated and found that solutions are unconditionally converged. Results are introduced and discussed for the universal variable and other physical parameters such as porosity and permeability of the reservoir; time and space.

Analytical Solution for Fractional Derivative Gas-Flow Equation in Porous Media

KAUST Repository

El-Amin, Mohamed

2017-07-06

In this paper, we introduce an analytical solution of the fractional derivative gas transport equation using the power-series technique. We present a new universal transform, namely, generalized Boltzmann change of variable which depends on the fractional order, time and space. This universal transform is employed to transfer the partial differential equation into an ordinary differential equation. Moreover, the convergence of the solution has been investigated and found that solutions are unconditionally converged. Results are introduced and discussed for the universal variable and other physical parameters such as porosity and permeability of the reservoir; time and space.

Pressure measurements in magnetic-fusion devices

International Nuclear Information System (INIS)

Dylla, H.F.

1981-11-01

Accurate pressure measurements are important in magnetic fusion devices for: (1) plasma diagnostic measurements of particle balance and ion temperature; (2) discharge cleaning optimization; (3) vacuum system performance; and (4) tritium accountability. This paper reviews the application, required accuracy, and suitable instrumentation for these measurements. Demonstrated uses of ionization-type and capacitance-diaphragm gauges for various pressure and gas-flow measurements in tokamaks are presented, with specific reference to the effects of magnetic fields on gauge performance and the problems associated with gauge calibration

Pressure measurements in magnetic-fusion devices

Energy Technology Data Exchange (ETDEWEB)

Dylla, H.F.

1981-11-01

Accurate pressure measurements are important in magnetic fusion devices for: (1) plasma diagnostic measurements of particle balance and ion temperature; (2) discharge cleaning optimization; (3) vacuum system performance; and (4) tritium accountability. This paper reviews the application, required accuracy, and suitable instrumentation for these measurements. Demonstrated uses of ionization-type and capacitance-diaphragm gauges for various pressure and gas-flow measurements in tokamaks are presented, with specific reference to the effects of magnetic fields on gauge performance and the problems associated with gauge calibration.

Numerical Methods for an Analysis of Hydrogen Behaviors Coupled with Thermal Hydraulics in a NPP Containment

International Nuclear Information System (INIS)

Kim, Jongtae; Park, Rae-Joon; Hong, Seong-Wan; Kim, Gun-Hong

2016-01-01

In a containment safety analysis, multi-dimensional characteristics in thermal hydraulics are very important because the flow paths are not confined in a large free volume of the containment. The analysis is difficult because of a difference in length scales between a characteristic length of the flow and representative length of the containment. In order to simulate hydrogen and steam behaviors in a containment during postulated severe accidents, the GASFLOW code as a multi-dimensional analysis tool for NPP containment has been used for years because of its computational efficiency. Though GASFLOW is well developed for a real NPP containment analysis, there exist shortcomings in nodalization, two-phase and turbulence models. It is based on a Cartesian or cylindrical coordinate mesh, so it is impractical to refine a mesh locally in a region with a physical or geometrical complication. In this paper, the importance of the hydrogen safety in an NPP containment and requirements of the analysis tool was described. And physical models necessary for the hydrogen safety analysis code were listed. As a member of international collaborative project HYMERES for containment thermal hydraulics, KAERI is actively participating in an analytic working group. As an analysis tool for blind benchmarkes, the analysis code described in this paper was used. From the blind benchmark analyses, it was found that the code is very promising for hydrogen safety analysis. Currently, it is proposed to develop the code collaboratively in a hydrogen safety community based on an open-source strategy

Numerical Methods for an Analysis of Hydrogen Behaviors Coupled with Thermal Hydraulics in a NPP Containment

Energy Technology Data Exchange (ETDEWEB)

Kim, Jongtae; Park, Rae-Joon; Hong, Seong-Wan; Kim, Gun-Hong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In a containment safety analysis, multi-dimensional characteristics in thermal hydraulics are very important because the flow paths are not confined in a large free volume of the containment. The analysis is difficult because of a difference in length scales between a characteristic length of the flow and representative length of the containment. In order to simulate hydrogen and steam behaviors in a containment during postulated severe accidents, the GASFLOW code as a multi-dimensional analysis tool for NPP containment has been used for years because of its computational efficiency. Though GASFLOW is well developed for a real NPP containment analysis, there exist shortcomings in nodalization, two-phase and turbulence models. It is based on a Cartesian or cylindrical coordinate mesh, so it is impractical to refine a mesh locally in a region with a physical or geometrical complication. In this paper, the importance of the hydrogen safety in an NPP containment and requirements of the analysis tool was described. And physical models necessary for the hydrogen safety analysis code were listed. As a member of international collaborative project HYMERES for containment thermal hydraulics, KAERI is actively participating in an analytic working group. As an analysis tool for blind benchmarkes, the analysis code described in this paper was used. From the blind benchmark analyses, it was found that the code is very promising for hydrogen safety analysis. Currently, it is proposed to develop the code collaboratively in a hydrogen safety community based on an open-source strategy.

A thermogravimetric analyzer for corrosive atmospheres, and its application to the chlorination of ZrO2-C mixtures

International Nuclear Information System (INIS)

Pasquevich, Daniel; Caneiro, Alberto

1990-01-01

A thermogravimetric analyzer built on the basis of a Cahn 2000 electrobalance, suitable for using with corrosive atmospheres, is reported. The corrections for buoyancy and gas-flow effects, which strongly modify the thermogravimetric curves are discussed. As an application, the kinetics of a reaction between chlorine and a mixture of zirconia and carbon has been studied. It has been able to measure the uptake of chlorine by carbon and the reaction rate within the first 50 seconds. Evidence of a transition to quite a different reaction rate at longer times is presented. (Author)

Development of Evaluation Technology for Hydrogen Combustion in containment and Accident Management Code for CANDU

International Nuclear Information System (INIS)

Kim, S. B.; Kim, D. H.; Song, Y. M.

2011-08-01

For a licensing of nuclear power plant(NPP) construction and operation, the hydrogen combustion and hydrogen mitigation system in the containment is one of the important safety issues. Hydrogen safety and its control for the new NPPs(Shin-Wolsong 1 and 2, Shin-Ulchin 1 and 2) have been evaluated in detail by using the 3-dimensional analysis code GASFLOW. The experimental and computational studies on the hydrogen combustion, and participations of the OEDE/NEA programs such as THAI and ISP-49 secures the resolving capabilities of the hydrogen safety and its control for the domestic nuclear power plants. ISAAC4.0, which has been developed for the assessment of severe accident management at CANDU plants, was already delivered to the regulatory body (KINS) for the assessment of the severe accident management guidelines (SAMG) for Wolsong units 1 to 4, which are scheduled to be submitted to KINS. The models for severe accident management strategy were newly added and the graphic simulator, CAVIAR, was coupled to addition, the ISAAC computer code is anticipated as a platform for the development and maintenance of Wolsong plant risk monitor and Wolsong-specific SAMG

Evaluation of pulsed streamer corona experiments to determine the O* radical yield

International Nuclear Information System (INIS)

Van Heesch, E J M; Winands, G J J; Pemen, A J M

2008-01-01

The production of O* radicals in air by a pulsed streamer plasma is studied by integration of a large set of precise experimental data and the chemical kinetics of ozone production. The measured data comprise ozone production, plasma energy, streamer volume, streamer length, streamer velocity, humidity and gas-flow rate. Instead of entering input parameters into a kinetic model to calculate the end products the opposite strategy is followed. Since the amount of end-products (ozone) is known from the measurements the model had to be applied in the reverse direction to determine the input parameters, i.e. the O* radical concentration.

Evaluation of pulsed streamer corona experiments to determine the O* radical yield

Science.gov (United States)

van Heesch, E. J. M.; Winands, G. J. J.; Pemen, A. J. M.

2008-12-01

The production of O* radicals in air by a pulsed streamer plasma is studied by integration of a large set of precise experimental data and the chemical kinetics of ozone production. The measured data comprise ozone production, plasma energy, streamer volume, streamer length, streamer velocity, humidity and gas-flow rate. Instead of entering input parameters into a kinetic model to calculate the end products the opposite strategy is followed. Since the amount of end-products (ozone) is known from the measurements the model had to be applied in the reverse direction to determine the input parameters, i.e. the O* radical concentration.

Production of an intense source of micro-second proton pulses

International Nuclear Information System (INIS)

Belmont, J.L.

1965-02-01

In order to obtain micro-second proton pulses of 100 mA, we have built a duoplasmatron ion source and beam focusing equipment. The pulses of the ion-source were produced by a load discharge. The source operates as a hydrogen-thyratron. The particular geometry of the duoplasmatron was chosen in order that the ion emission be stable with a 10 A arc and with a gas-flow lower than 10 cm 3 /h T.P.N. Studies of the beam showed preponderance of protons and the presence of heavy ions. The beam density is higher on the optic axis. (author) [fr

Preliminary H{sub 2} Combustion Analysis in the Containment of APR1400 for SBLOCA Accident using a Multi-Dimensional H{sub 2} Analysis System

Energy Technology Data Exchange (ETDEWEB)

Kang, Hyung Seok; Kim, Jongtae; Kim, Sang-Baik; Hong, Seong-Wan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The COM3D analyze an overpressure buildup resulting from a propagation of hydrogen flame along the structure and wall in the containment using the hydrogen distribution result calculated by the GASFLOW. The MAAP evaluates a hydrogen source during a severe accident and transfer it to the GASFLOW. We performed a hydrogen combustion analysis using the multidimensional hydrogen analysis system for a station blackout (SBO) accident under the assumption of 100% metal-water reaction in the reactor vessel. The COM3D results showed that the pressure buildup was about 250 kPa because the flame speed was not increased above 300 m/s and the pressure wave passed through the open spaces in the large containment. To increase the reliability of the COM3D calculation, it is necessary to perform the hydrogen combustion analysis for another accident such as a small break loss of coolant (SBLOCA). KAERI performed a hydrogen combustion analysis for a SBLOCA accident using the multi-dimensional hydrogen analysis system under the assumption of 100% metal-water reaction in the reactor vessel. From the COM3D results, we can know that the pressure buildup was approximately 310 kPa because the flame speed was not increased above 100 m/s owing to the high steam concentration and low oxygen concentration in the hydrogen distributed region of the containment. The predicted maximum overpressure in the SBLOCA accident is similar to that of the COM3D results for the SBO accident. Thus, we found that the maximum overpressure due to the hydrogen combustion in the containment may depend on the amount of hydrogen mass released from the reactor vessel.

Study of reactions for the production of uranium titrafluoride and uranium hexafluoride

International Nuclear Information System (INIS)

Guzella, M.F.R.

1985-01-01

The main production processes of uranium hexafluoride in pilot plants and industrial facilities are described. The known reactions confirmed in laboratory experiments that lead to Uf 6 or other intermediate fluorides are discussed. For the purpose of determining a thermodinamically feasible reaction involving the sulfur hexafluoride as fluorinating agent, a mock-up facility was designed and constructed as a part of the R and D work planned at the CDTN (Nuclebras Center for Nuclear Technology Development). IN the uranium tatrafluoride synthesis employing U 3 O 8 and SF 6 several experimental parameters are studied. The reaction time, gasflow, temperature and stoechiometic relations among reagents are described in detail. (Author) [pt

Development of low level alpha particle counting system

International Nuclear Information System (INIS)

Minobe, Masao; Kondo, Hiraku; Chinuki, Takashi; Hirano, Hiromichi

1987-01-01

Much attention has been paid to the trace analysis of uranium and thorium contained in the base material of LSI or VLSI, since the so-called ''soft-error'' of the memory device was known to be due to alpha particles emitted from these radioactive elements. We have developed an apparatus to meet the needs of estimating such a very small quantity of U and Th of the level of ppb, by directly counting alpha particles using a gas-flow type proportional counter. This method requires no sophisticated analytical skill, and the accuracy of the result is satisfactory. The instrumentation and some application of this apparatus are described. (author)

Erosion and break-up of light-gas layers by a horizontal jet in a multi-vessel, large-scale containment test system

Energy Technology Data Exchange (ETDEWEB)

Zboray, Robert, E-mail: robert.zboray@psi.ch; Mignot, Guillaume; Kapulla, Ralf; Paladino, Domenico

2015-09-15

The distribution and eventual stratification of hydrogen released during a hypothetical severe accident and the stability of the stratification formed in the early phase of the transient is of particular safety concern in Light Water Reactors (LWRs). The large-scale containment test facility PANDA (PSI, Switzerland) has been used to perform a series of four tests examining the erosion and break-up of stratified light-gas layers in the frame of the OECD SETH-2 project. The ultimate goal of the test program is to set-up an experimental data base of high-quality and high-density data that can challenge and validate 3D containment codes like e.g. GOTHIC, GASFLOW or MARS and validate the applicability of CFD codes like FLUENT or CFX for LWR containment problems. The test series discussed here focuses on the erosion of a stratified, helium-rich layer by horizontal steam injection at different locations below the layer. An approach with step-wise increasing complexity has been chosen to examine this problem allowing control over the rate of pressure increase and the occurrence of condensation. The step-wise approach enables a thorough understanding of the influence of different phenomena like position of steam injection, diffusion, pressurization and condensation on the behavior and erosion of the stratified layer.

The use of design-of-experiments methodology to optimize polymer capsule fabrication. 1998 summer research program for high school juniors at the University of Rochester's Laboratory for Laser Energetics. Student research reports

International Nuclear Information System (INIS)

Lai, L.

1999-03-01

Future inertial-fusion experiments on Omega will utilize ∼ 1 mm-diameter cryogenic targets that have a ∼ 100-microm-thick, uniformly-frozen fuel layer on their interior. It is desired that they have a stress-free wall thickness < 1 microm and an rms surface roughness < 20 nm. A design-of-experiments (DOE) approach was used to characterize a glow-discharge-polymerization coater built at LLE to fabricate smooth, stress-free capsules with submicron wall thicknesses. The DOE approach was selected because several parameters can be changed simultaneously in a manner which allows the minimum number of runs to be performed to obtain statistically-relevant data. Planar, silicon substrates were coated with ∼ 3--5 microm of polymer and profilometry was used to determine the coating rate, the film stress, and the surface roughness. The coating rate was found to depend on the trans-2-butene/hydrogen ratio, the total gas-flow rate, the total chamber pressure, and the RF power. In addition, a two-parameter interaction between the total pressure and the RF power also affects the coating rate. The film stress depends on the total chamber pressure and the total mass-flow rate. The surface roughness is independent of the parameters studied. Preliminary results indicate that capsules can be produced rapidly without affecting the smoothness of their outside surface and without residual stress in their walls

Effect of spray on performance of the hydrogen mitigation system during LB-LOCA for CPR1000 NPP

International Nuclear Information System (INIS)

Huang, X.G.; Yang, Y.H.; Cheng, X.; Al-Hawshabi, N.H.A.; Casey, S.P.

2011-01-01

Highlights: → This paper presents the spray effect on HMS during LB-LOCA by using GASFLOW. → The positive and negative effects of spray are summarized. → And the combination of DIS and PAR system is suggested as reasonable countermeasures. → This research is an important work aimed at the study of spray and hydrogen mitigation. → The contents of this paper should become a required part of the safety analysis of Chinese NPPs. - Abstract: During the course of the hypothetical large break loss-of-coolant accident (LB-LOCA) in a nuclear power plant (NPP), hydrogen is generated by a reaction between steam and the fuel-cladding inside the reactor pressure vessel (RPV). It is then ejected from the break into the containment along with a large amount of steam. Management of hydrogen safety and prevention of over-pressurization could be implemented through a hydrogen mitigation system (HMS) and spray system in CPR1000 NPP. The computational fluid dynamics (CFD) code GASFLOW is utilized in this study to analyze the spray effect on the performance of HMS during LB-LOCA. Results show that as a kind of HMS, deliberate igniter system (DIS) could initiate hydrogen combustion immediately after the flammability limit of the gas mixture has been reached. However, it will increase the temperature and pressure drastically. Operating the DIS under spray condition could result in hydrogen combustion being suppressed by suspended droplets inside the containment. Furthermore, the droplets could also mitigate local the temperature rise. Operation of a PAR system, another kind of HMS, consumes hydrogen steadily with a lower recombination rate which is not affected noticeably by the spray system. Numerical results indicate that the dual concept, namely the integrated application of DIS and PAR systems, is a constructive improvement for hydrogen safety under spray condition during LB-LOCA.

Results of Self-Absorption Study on the Versapor 3000 Filters for Radioactive Particulate Air Sampling

International Nuclear Information System (INIS)

Barnett, J.M.

2008-01-01

Since the mid-1980s the Pacific Northwest National Laboratory (PNNL) has used a value of 0.85 as a correction factor for the self absorption of activity of particulate radioactive air samples. More recently, an effort was made to evaluate the current particulate radioactive air sample filters (Versapor(reg s ign) 3000) used at PNNL for self absorption effects. There were two methods used in the study, (1) to compare the radioactivity concentration by direct gas-flow proportional counting of the filter to the results obtained after acid digestion of the filter and counting again by gas-flow proportional detection and (2) to evaluate sample filters by high resolution visual/infrared microscopy to determine the depth of material loading on or in the filter fiber material. Sixty samples were selected from the archive for acid digestion in the first method and about 30 samples were selected for high resolution visual/infrared microscopy. Mass loading effects were also considered. From the sample filter analysis, large error is associated with the average self absorption factor, however, when the data is compared directly one-to-one, statistically, there appears to be good correlation between the two analytical methods. The mass loading of filters evaluated was <0.2 mg cm-2 and was also compared against other published results. The microscopy analysis shows the sample material remains on the top of the filter paper and does not imbed into the filter media. Results of the microscopy evaluation lead to the conclusion that there is not a mechanism for significant self absorption. The overall conclusion is that self-absorption is not a significant factor in the analysis of filters used at PNNL for radioactive air stack sampling of radionuclide particulates and that an applied correction factor is conservative in determining overall sample activity. A new self absorption factor of 1.0 is recommended

Mechanical properties of Al2O3-doped (2 wt.%) ZnO films

International Nuclear Information System (INIS)

Kuriki, Shina; Kawashima, Toshitaka

2007-01-01

We report a new method of evaluating the adhesion of Al 2 O 3 -doped (2 wt.%) ZnO (AZO) thin films. The AZO films were deposited by DC reactive magnetron sputtering on plastic film (PET: polyethyleneterephthalate) at various sputtering pressures, power, and reactive gas-flow ratios. The adhesion test of the films was carried out using the nanoindentation system. The fracture point as determined by the load-displacement curve occurred at the time of separation between the thin film and the substrate. The integration value of load and displacement to the fracture point is defined as the degree of adhesion (S W ). The AZO films showed that adhesion increase as sputtering power increases and sputtering pressure decreases

Flow, simulation and dynamics. Including a contribution of Vienna University (TU Wien); Stroemung, Simulation und Dynamik. Mit einem Beitrag der TU Wien

Energy Technology Data Exchange (ETDEWEB)

Kauder, K. [ed.

1998-12-31

This report covers the following topics: Gas-flow through clearances in screw vacuum pumps - part 1, gas flow research at a plane screw type machine model - part 2, two-phase screw-type engine - problems of the filling process, oil as a design parameter in screw-type engines - use of non-newtonian oils, experimental determination of the dynamic properties of screw compressors, hot gas screw-type engine - simulations as a basis for construction - part 3. [Deutsch] Dieser Bericht hat folgende Inhalte: Gasspaltstroemungen in Schraubenspindel-Vakuumpumpen - Teil 1, Gasspaltstroemungen in einem ebenen Schraubenmaschinenmodell - Teil 2, Zweiphasen-Schraubenmotor-Probleme des Fuellungsvorganges, Oel als Konstruktionselement - Einsatz nicht-newtonscher Oele, die experimentelle Bestimmung der dynamischen Eigenschaften von Schraubenkompressoren, die Heissgasschraubenmaschine - simulationsgestuetzte Auslegung - Teil 3

Behavioral program synthesis with genetic programming

CERN Document Server

Krawiec, Krzysztof

2016-01-01

Genetic programming (GP) is a popular heuristic methodology of program synthesis with origins in evolutionary computation. In this generate-and-test approach, candidate programs are iteratively produced and evaluated. The latter involves running programs on tests, where they exhibit complex behaviors reflected in changes of variables, registers, or memory. That behavior not only ultimately determines program output, but may also reveal its `hidden qualities' and important characteristics of the considered synthesis problem. However, the conventional GP is oblivious to most of that information and usually cares only about the number of tests passed by a program. This `evaluation bottleneck' leaves search algorithm underinformed about the actual and potential qualities of candidate programs. This book proposes behavioral program synthesis, a conceptual framework that opens GP to detailed information on program behavior in order to make program synthesis more efficient. Several existing and novel mechanisms subs...

Exchange between the stagnant and flowing zone in gas-flowing solids-fixed bed contactors

Directory of Open Access Journals (Sweden)

ALEKSANDAR P. DUDUKOVIC

2005-02-01

Full Text Available In countercurrent gas – flowing solids – fixed bed contactors, a fraction of the flowing solids is in motion (dynamic holdup, while the other fraction is resting on the fixed bed elements. In this study it was experimentally proved that the stagnant zone should not be considered as a dead part of the column, but that there is a dynamic exchange between these two portions of flowing solids particles. Combining a mathematical model with tracer experiments, the rate of exchange was determined and it was shown that only a small part (ca. 20 % of the stagnant region should be considered as a dead one.

Functional Programming

OpenAIRE

Chitil, Olaf

2009-01-01

Functional programming is a programming paradigm like object-oriented programming and logic programming. Functional programming comprises both a specific programming style and a class of programming languages that encourage and support this programming style. Functional programming enables the programmer to describe an algorithm on a high-level, in terms of the problem domain, without having to deal with machine-related details. A program is constructed from functions that only map inputs to ...

Programming language for computations in the Interkosmos program

Science.gov (United States)

Schmidt, K.

1975-01-01

The programming system for Intercosmos data processing, based on the structural programming theory, which considers a program as an ordered set of standardized elementary parts, from which the user programs are automatically generated, is described. The programs are comprised of several modules, which are briefly summarized. The general structure of the programming system is presented in a block diagram. A programming control language developed to formulate the problem quickly and completely is presented along with basic symbols which are characteristic of the Intercosmos programming system.

Mechanical properties of Al{sub 2}O{sub 3}-doped (2 wt.%) ZnO films

Energy Technology Data Exchange (ETDEWEB)

Kuriki, Shina [Core Technology Development Group, Core Component Business Unit, Sony Corporation, 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo 141-0001 (Japan)], E-mail: Shina.Kuriki@jp.sony.com; Kawashima, Toshitaka [Core Technology Development Group, Core Component Business Unit, Sony Corporation, 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo 141-0001 (Japan)], E-mail: Toshitaka.Kawashima@jp.sony.com

2007-10-15

We report a new method of evaluating the adhesion of Al{sub 2}O{sub 3}-doped (2 wt.%) ZnO (AZO) thin films. The AZO films were deposited by DC reactive magnetron sputtering on plastic film (PET: polyethyleneterephthalate) at various sputtering pressures, power, and reactive gas-flow ratios. The adhesion test of the films was carried out using the nanoindentation system. The fracture point as determined by the load-displacement curve occurred at the time of separation between the thin film and the substrate. The integration value of load and displacement to the fracture point is defined as the degree of adhesion (S{sub W}). The AZO films showed that adhesion increase as sputtering power increases and sputtering pressure decreases.

Environmental natural radioactivity concentrations of Tekirdag

International Nuclear Information System (INIS)

Yarar, Y.; Kam, E.

2004-01-01

Full text: In this study, the environmental natural radioactivity concentrations of Tekirdag, a city in the region of Marmara in Turkey, have been measured. Gamma spectrometric analysis of the soil samples collected from 40 points of Tekirdag was performed by using an HPGe detector and the radionuclide concentrations of the decay products of 238 U and 232 Th series, 40K and 137 Cs were determined. Gross alpha and gross beta activities of the water samples taken from municipal supplies, springs, wells and fountains were performed by using the Berthold, LB770-PC 10, a gas-flow proportional counter. Gamma exposure dose rates were measured by using an Eberline Smart Portable scintillation detector and the annual effective dose equivalents caused by exposure gamma dose rates were calculated

Photoelectron-spectroscopic and reactivity investigation of thin Pd-Sn films prepared by magnetron sputtering

International Nuclear Information System (INIS)

Skala, T.; Veltruska, K.; Sedlacek, L.; Masek, K.; Matolinova, I.; Matolin, V.

2007-01-01

We have studied Pd-Sn layers with different composition prepared by magnetron sputtering. Layers were sputtered onto Al 2 O 3 and SiO 2 substrates and studied by X-ray photoelectron spectroscopy (XPS). Spectra confirmed that after vacuum annealing residual oxygen and carbon have been removed and bimetallic bonds have been created. The shift of Pd 3d 5/2 core level to higher binding energy followed by the peak narrowing in dependence on the composition was observed, accompanied by the shift of the Pd 4d in the valence band region, induced by hybridization of Pd-d and Sn-s,p states. Experiments carried out on a gas-flow reactor indicate increasing temperature of the CO oxidation with tin ratio in the alloy

Proportional counter system for radiation measurement

Energy Technology Data Exchange (ETDEWEB)

Sugimoto, M; Okudera, S

1970-11-21

A gas such as Xe or Kr employed in counter tubes is charged into the counter tube of a gas-flow type proportional counter for radiation measurement and into a vessel having a volume larger than that of the counter tube. The vessel communicates with the counter tube to circulate the gas via a pump through both the vessel and tube during measurement. An organic film such as a polyester synthetic resin film is used for the window of the counter tube to measure X-rays in the long wavelength range. Accordingly, a wide range of X-rays can be measured including both long and short wavelengths ranges by utilizing only one counter tube, thus permitting the gases employed to be effectively used.

Mixed field dosimetry with the twin chamber technique

International Nuclear Information System (INIS)

Burger, G.; Maier, E.

1974-04-01

For the separate dosimetry of the neutron- and gamma-component in a mixed beam it is principally possible to use two ionization chambers with different ratios of neutron- to gamma sensitivity. Several authors proposed for this purpose the use of a homogenious TE-chamber filled with the TE-gas and of a carbon-chamber filled with CO 2 -gas. This chamber combination is also commercially available in several countries. The chambers are normally equipped with a continuous gas-flow provision and with a waterproof-housing for the use within liquid phantoms. The application of such chambers for mixed field dosimetry in the intercomparison project of the ICRU at the RARAF-facility in Brookhaven (International Neutron Dosimetry Intercomparison - INDI) is described. (orig./HP) [de

Measurement of gross alpha and gross beta activity concentrations in human tooth

International Nuclear Information System (INIS)

Soeguet, Omer; Aydin, Mehmet Fatih; Kuecuekoender, Erdal; Zorer, Ozlem Selcuk; Dogru, Mahmut

2010-01-01

The gross alpha and gross beta activity concentrations were measured in human tooth taken from 3 to 6 age-groups to 40 and over ones. Accumulated teeth samples are investigated in two groups as under and above 18 years. The gross alpha and beta radioactivity of human tooth samples was measured by using a gas-flow proportional counter (PIC-MPC 9604-α/β counter). In tooth samples, for female age-groups, the obtained results show that the mean gross alpha and gross beta activity concentrations varied between 0.534-0.203 and 0.010-0.453 Bq g -1 and the same concentrations for male age-groups varied between 0.009-1.168 and 0.071-0.204 Bq g -1 , respectively.

Maine Migrant Program: 1997-1998 Program Evaluation.

Science.gov (United States)

Bazinet, Suzanne C., Ed.

The Maine Department of Education contracts with local educational agencies to administer the Maine Migrant Education Program. The program's overall mission is to provide the support necessary for migrant children to achieve Maine's academic standards. In 1997-98, 73 local migrant programs served 9,838 students, and 63 summer programs served 1,769…

Program Leadership from a Nordic Perspective - Program Leaders' Power to Influence Their Program

DEFF Research Database (Denmark)

Högfeldt, Anna-Karin; Strömberg, Emma; Jerbrant, Anna

2013-01-01

research demonstrated that program leaders have quite different positions, strategies and methods when it comes to monitoring and developing their programs. In this paper, a deeper investigation is carried out of the (im-) possibilities to make real influence on the study courses that constitutes...... the respective Engineering study programs. Eight program leaders from the five N5T universities have been interviewed, and the analysis of these studies, has culminated in a model for the analysis of program leadership for Engineering education development....

Multi-Year Program Plan - Building Regulatory Programs

Energy Technology Data Exchange (ETDEWEB)

none,

2010-10-01

This document presents DOE’s multi-year plan for the three components of the Buildings Regulatory Program: Appliance and Equipment Efficiency Standards, ENERGY STAR, and the Building Energy Codes Program. This document summarizes the history of these programs, the mission and goals of the programs, pertinent statutory requirements, and DOE’s 5-year plan for moving forward.

Program summary for the Civilian Reactor Development Program

International Nuclear Information System (INIS)

1982-07-01

This Civilian Reactor Development Program document has the prime purpose of summarizing the technical programs supported by the FY 1983 budget request. This section provides a statement of the overall program objectives and a general program overview. Section II presents the technical programs in a format intended to show logical technical interrelationships, and does not necessarily follow the structure of the formal budget presentation. Section III presents the technical organization and management structure of the program

Geothermal Technologies Program Overview - Peer Review Program

Energy Technology Data Exchange (ETDEWEB)

Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2011-06-06

This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

A Program Transformation for Backwards Analysis of Logic Programs

DEFF Research Database (Denmark)

Gallagher, John Patrick

2003-01-01

The input to backwards analysis is a program together with properties that are required to hold at given program points. The purpose of the analysis is to derive initial goals or pre-conditions that guarantee that, when the program is executed, the given properties hold. The solution for logic...... programs presented here is based on a transformation of the input program, which makes explicit the dependencies of the given program points on the initial goals. The transformation is derived from the resultants semantics of logic programs. The transformed program is then analysed using a standard...

Object-Oriented Programming in the Beta Programming Language

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger; Nygaard, Kristen

This is a book on object-oriented programming and the BETA programming language. Object-oriented programming originated with the Simula languages developed at the Norwegian Computing Center, Oslo, in the 1960s. The first Simula language, Simula I, was intended for writing simulation programs....... Simula I was later used as a basis for defining a general purpose programming language, Simula 67. In addition to being a programming language, Simula1 was also designed as a language for describing and communicating about systems in general. Simula has been used by a relatively small community for many...... years, although it has had a major impact on research in computer science. The real breakthrough for object-oriented programming came with the development of Smalltalk. Since then, a large number of programming languages based on Simula concepts have appeared. C++ is the language that has had...

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Program auto

International Nuclear Information System (INIS)

Rawool-Sullivan, M.W.; Plagnol, E.

1990-01-01

The program AUTO was developed to be used in the analysis of dE vs E type spectra. This program is written in FORTRAN and calculates dE vs E lines in MeV. The provision is also made in the program to convert these lines from MeV to ADC channel numbers to facilitate the comparison with the raw data from the experiments. Currently the output of this program can be plotted with the display program, called VISU, but it can also be used independent of the program VISU, with little or no modification in the actual fortran code. The program AUTO has many useful applications. In this article the program AUTO is described along with its applications

Fast dynamic ventilation MRI of hyperpolarized 129 Xe using spiral imaging.

Science.gov (United States)

Doganay, Ozkan; Matin, Tahreema N; Mcintyre, Anthony; Burns, Brian; Schulte, Rolf F; Gleeson, Fergus V; Bulte, Daniel

2018-05-01

To develop and optimize a rapid dynamic hyperpolarized 129 Xe ventilation (DXeV) MRI protocol and investigate the feasibility of capturing pulmonary signal-time curves in human lungs. Spiral k-space trajectories were designed with the number of interleaves N int  = 1, 2, 4, and 8 corresponding to voxel sizes of 8 mm, 5 mm, 4 mm, and 2.5 mm, respectively, for field of view = 15 cm. DXeV images were acquired from a gas-flow phantom to investigate the ability of N int  = 1, 2, 4, and 8 to capture signal-time curves. A finite element model was constructed to investigate gas-flow dynamics corroborating the experimental signal-time curves. DXeV images were also carried out in six subjects (three healthy and three chronic obstructive pulmonary disease subjects). DXeV images and numerical modelling of signal-time curves permitted the quantification of temporal and spatial resolutions for different numbers of spiral interleaves. The two-interleaved spiral (N int  = 2) was found to be the most time-efficient to obtain DXeV images and signal-time curves of whole lungs with a temporal resolution of 624 ms for 13 slices. Signal-time curves were well matched in three healthy volunteers. The Spearman's correlations of chronic obstructive pulmonary disease subjects were statistically different from three healthy subjects (P spiral demonstrates the successful acquisition of DXeV images and signal-time curves in healthy subjects and chronic obstructive pulmonary disease patients. Magn Reson Med 79:2597-2606, 2018. © 2017 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. © 2017 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc

GASFLOW Simulations for Containment Venting System of Emsland Nuclear Power Plant (KIT Scientific Reports ; 7695)

OpenAIRE

Xu, Zhanjie; Jordan, Thomas

2015-01-01

Ziel der Untersuchungen ist es, die Reaktivität, Brennbarkeit, sowie Potenziale für Flammenbeschleunigung und Detonationsumschlag der Gasmischungen in der Sicherheitsbehälter Entlüftungssystem über der Zeit mit Hilfe von detaillierten 3D CFD Simulationen zu ermitteln.

A Playful Programming Products Vs. Programming Concepts Matrix

DEFF Research Database (Denmark)

Allsopp, Benjamin Brink

2017-01-01

to computer program: playful programming. This research also describes a project to bring together different stakeholders (developers, educators, parents and researchers) with a common vocabulary for describing, developing, teaching with and comparing these playful programming products and develops a model......A number of Danish primary schools are involved in pilot studies where 1st to 9th grade students work with Scratch and Lego MindStorms in STEM subjects. These games may become part of the curriculum at these schools. Recent research identifies a category of games and toys that support learning...... to provide educators and researchers involved in pilot studies with an overview of which programming concepts various playful programming products exercise (a playful programming products vs. programming concepts matrix). We also add additional concept specializations and expand on the descriptions...

Programming by Numbers -- A Programming Method for Complete Novices

NARCIS (Netherlands)

Glaser, Hugh; Hartel, Pieter H.

2000-01-01

Students often have difficulty with the minutiae of program construction. We introduce the idea of `Programming by Numbers', which breaks some of the programming process down into smaller steps, giving such students a way into the process of Programming in the Small. Programming by Numbers does not

Clean Coal Technology Demonstration Program: Program Update 1998

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Program specialization

CERN Document Server

Marlet, Renaud

2013-01-01

This book presents the principles and techniques of program specialization - a general method to make programs faster (and possibly smaller) when some inputs can be known in advance. As an illustration, it describes the architecture of Tempo, an offline program specializer for C that can also specialize code at runtime, and provides figures for concrete applications in various domains. Technical details address issues related to program analysis precision, value reification, incomplete program specialization, strategies to exploit specialized program, incremental specialization, and data speci

UNDERSTANDING THE RELATIONSHIPS OF PROGRAM SATISFACTION, PROGRAM LOYALTY AND STORE LOYALTY AMONG CARDHOLDERS OF LOYALTY PROGRAMS

Directory of Open Access Journals (Sweden)

Nor Asiah Omar

2011-01-01

Full Text Available Loyalty programs have increasingly attracted interest in both academic marketing research and practice. One major factor that has been increasingly discussed is loyalty. In this study we examine the influence of cardholders' satisfaction on loyalty (program loyalty and store loyalty in a retail context, namely, in department stores and superstores. Data were collected from 400 cardholders of a retail loyalty program in Klang Valley, Malaysia via the drop-off-and-collect technique. Structural modelling techniques were applied to analyze the data. The results indicated that program satisfaction is not related to store loyalty (share-of-wallet, share-of-visit and store preference. However, loyalty to the program (program loyalty plays a crucial intervening role in the relationship between program satisfaction and store loyalty. The study underscores the principal importance of program loyalty in the retail loyalty program.

Calibration method based on direct radioactivity measurement for radioactive gas monitoring instruments

International Nuclear Information System (INIS)

Yoshida, Makoto; Ohi, Yoshihiro; Chida, Tohru; Wu, Youyang.

1993-01-01

A calibration method for radioactive gas monitoring instruments was studied. In the method, gaseous radioactivity standards were provided on the basis of the direct radioactivity measurement by the diffusion-in long proportional counter method (DLPC method). The radioactivity concentration of the gas mixture through a monitoring instrument was determined by sampling the known volume of the gas mixture into the proportional counter used for the DLPC method. Since oxygen in the gas mixture decreased the counting efficiency in a proportional counter, the influence on calibration was experimentally estimated. It was not serious and able to be easily corrected. By the present method, the relation between radioactivity concentration and ionization current was determined for a gas-flow ionization chamber with 1.5 l effective volume. It showed good agreement with the results in other works. (author)

Measurement of the activity of electron capturing isotopes

International Nuclear Information System (INIS)

Szoerenyi, A.

1980-01-01

In order to measure precisely the activity of electron capturing isotopes, an equipment was constructed for the detection the X-photons, the Auger- and the conversing electrons by a high-pressure, gas-flow 4π proportional counter. The proportional counter and the NaI(Tl) scintillation counter are placed in a common lead-shielding, thus, the equipment is suited for the measurement of radioisotopes decaying in coincidence. The structure of the proportional counter and of the pressure-control system are detailed. As an example, the energy spectra of a 109 Cd solution, taken at different pressures, are published. At a pressure of 1.1 MPa the 3 peaks are well separated. The results of an international test, in which the radioactivity of a 57 Co sample was determined, are published, too. (L.E.)

Collectively loading programs in a multiple program multiple data environment

Science.gov (United States)

Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

2016-11-08

Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

Clean Coal Technology Demonstration Program: Program Update 2001

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2002-07-30

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

An Analysis of Programming Beginners' Source Programs

Science.gov (United States)

Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

The production of animations was made the subject of a university programming course in order to make students understand the process of program creation, and so that students could tackle programming with interest. In this paper, the formats and composition of the programs which students produced were investigated. As a result, it was found that there were a lot of problems related to such matters as how to use indent, how to apply comments and functions etc. for the format and the composition of the source codes.

Learners Programming Language a Helping System for Introductory Programming Courses

Directory of Open Access Journals (Sweden)

MUHAMMAD SHUMAIL NAVEED

2016-07-01

Full Text Available Programming is the core of computer science and due to this momentousness a special care is taken in designing the curriculum of programming courses. A substantial work has been conducted on the definition of programming courses, yet the introductory programming courses are still facing high attrition, low retention and lack of motivation. This paper introduced a tiny pre-programming language called LPL (Learners Programming Language as a ZPL (Zeroth Programming Language to illuminate novice students about elementary concepts of introductory programming before introducing the first imperative programming course. The overall objective and design philosophy of LPL is based on a hypothesis that the soft introduction of a simple and paradigm specific textual programming can increase the motivation level of novice students and reduce the congenital complexities and hardness of the first programming course and eventually improve the retention rate and may be fruitful in reducing the dropout/failure level. LPL also generates the equivalent high level programs from user source program and eventually very fruitful in understanding the syntax of introductory programming languages. To overcome the inherent complexities of unusual and rigid syntax of introductory programming languages, the LPL provide elementary programming concepts in the form of algorithmic and plain natural language based computational statements. The initial results obtained after the introduction of LPL are very encouraging in motivating novice students and improving the retention rate.

Analyzing Array Manipulating Programs by Program Transformation

Science.gov (United States)

Cornish, J. Robert M.; Gange, Graeme; Navas, Jorge A.; Schachte, Peter; Sondergaard, Harald; Stuckey, Peter J.

2014-01-01

We explore a transformational approach to the problem of verifying simple array-manipulating programs. Traditionally, verification of such programs requires intricate analysis machinery to reason with universally quantified statements about symbolic array segments, such as "every data item stored in the segment A[i] to A[j] is equal to the corresponding item stored in the segment B[i] to B[j]." We define a simple abstract machine which allows for set-valued variables and we show how to translate programs with array operations to array-free code for this machine. For the purpose of program analysis, the translated program remains faithful to the semantics of array manipulation. Based on our implementation in LLVM, we evaluate the approach with respect to its ability to extract useful invariants and the cost in terms of code size.

Subseabed-disposal program: systems-analysis program plan

International Nuclear Information System (INIS)

Klett, R.D.

1981-03-01

This report contains an overview of the Subseabed Nuclear Waste Disposal Program systems analysis program plan, and includes sensitivity, safety, optimization, and cost/benefit analyses. Details of the primary barrier sensitivity analysis and the data acquisition and modeling cost/benefit studies are given, as well as the schedule through the technical, environmental, and engineering feasibility phases of the program

Federal Wind Energy Program. Program summary. [USA

Energy Technology Data Exchange (ETDEWEB)

None

1978-01-01

The objective of the Federal Wind Energy Program is to accelerate the development of reliable and economically viable wind energy systems and enable the earliest possible commercialization of wind power. To achieve this objective for small and large wind systems requires advancing the technology, developing a sound industrial technology base, and addressing the non-technological issues which could deter the use of wind energy. This summary report outlines the projects being supported by the program through FY 1977 toward the achievement of these goals. It also outlines the program's general organization and specific program elements.

Automatic Construction of Java Programs from Functional Program Specifications

OpenAIRE

Md. Humayun Kabir

2015-01-01

This paper presents a novel approach to construct Java programs automatically from the input functional program specifications on natural numbers from the constructive proofs of the input specifications using an inductive theorem prover called Poiti'n. The construction of a Java program from the input functional program specification involves two phases. The theorem prover is used to construct a higher order functional (HOF) program from the input specification expressed as an existential the...

Environmental radioactive intercomparison program and radioactive standards program

Energy Technology Data Exchange (ETDEWEB)

Dilbeck, G. [Environmental Monitoring Systems Laboratory, Las Vegas, NV (United States)

1993-12-31

The Environmental Radioactivity Intercomparison Program described herein provides quality assurance support for laboratories involved in analyzing public drinking water under the Safe Drinking Water Act (SDWA) Regulations, and to the environmental radiation monitoring activities of various agencies. More than 300 federal and state nuclear facilities and private laboratories participate in some phase of the program. This presentation describes the Intercomparison Program studies and matrices involved, summarizes the precision and accuracy requirements of various radioactive analytes, and describes the traceability determinations involved with radioactive calibration standards distributed to the participants. A summary of program participants, sample and report distributions, and additional responsibilities of this program are discussed.

Veterinary Technician Program Director Leadership Style and Program Success

Science.gov (United States)

Renda-Francis, Lori A.

2012-01-01

Program directors of American Veterinary Medical Association (AVMA) accredited veterinary technician programs may have little or no training in leadership. The need for program directors of AVMA-accredited veterinary technician programs to understand how leadership traits may have an impact on student success is often overlooked. The purpose of…

Programming

International Nuclear Information System (INIS)

Jackson, M.A.

1982-01-01

The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

Knowledge, programming, and programming cultures: LISP, C, and Ada

Science.gov (United States)

Rochowiak, Daniel

1990-01-01

The results of research 'Ada as an implementation language for knowledge based systems' are presented. The purpose of the research was to compare Ada to other programming languages. The report focuses on the programming languages Ada, C, and Lisp, the programming cultures that surround them, and the programming paradigms they support.

System programming languages

OpenAIRE

Šmit, Matej

2016-01-01

Most operating systems are written in the C programming language. Similar is with system software, for example, device drivers, compilers, debuggers, disk checkers, etc. Recently some new programming languages emerged, which are supposed to be suitable for system programming. In this thesis we present programming languages D, Go, Nim and Rust. We defined the criteria which are important for deciding whether programming language is suitable for system programming. We examine programming langua...

Equipment qualification research program: program plan

International Nuclear Information System (INIS)

Dong, R.G.; Smith, P.D.

1982-01-01

The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump

40 CFR 68.175 - Prevention program/Program 3.

Science.gov (United States)

2010-07-01

... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.175 Prevention program/Program 3. (a) For each Program 3 process, the owner or operator shall provide the information indicated in paragraphs (b) through (p) of this section. If the same information applies to more than one covered process...

A strategy for automatically generating programs in the lucid programming language

Science.gov (United States)

Johnson, Sally C.

1987-01-01

A strategy for automatically generating and verifying simple computer programs is described. The programs are specified by a precondition and a postcondition in predicate calculus. The programs generated are in the Lucid programming language, a high-level, data-flow language known for its attractive mathematical properties and ease of program verification. The Lucid programming is described, and the automatic program generation strategy is described and applied to several example problems.

Stochastic integer programming by dynamic programming

NARCIS (Netherlands)

Lageweg, B.J.; Lenstra, J.K.; Rinnooy Kan, A.H.G.; Stougie, L.; Ermoliev, Yu.; Wets, R.J.B.

1988-01-01

Stochastic integer programming is a suitable tool for modeling hierarchical decision situations with combinatorial features. In continuation of our work on the design and analysis of heuristics for such problems, we now try to find optimal solutions. Dynamic programming techniques can be used to

Applied Energy Program

Science.gov (United States)

Science Programs Applied Energy Programs Civilian Nuclear Energy Programs Laboratory Directed Research » Applied Energy Program Applied Energy Program Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact

Computer-Assisted Program Reasoning Based on a Relational Semantics of Programs

Directory of Open Access Journals (Sweden)

Wolfgang Schreiner

2012-02-01

Full Text Available We present an approach to program reasoning which inserts between a program and its verification conditions an additional layer, the denotation of the program expressed in a declarative form. The program is first translated into its denotation from which subsequently the verification conditions are generated. However, even before (and independently of any verification attempt, one may investigate the denotation itself to get insight into the "semantic essence" of the program, in particular to see whether the denotation indeed gives reason to believe that the program has the expected behavior. Errors in the program and in the meta-information may thus be detected and fixed prior to actually performing the formal verification. More concretely, following the relational approach to program semantics, we model the effect of a program as a binary relation on program states. A formal calculus is devised to derive from a program a logic formula that describes this relation and is subject for inspection and manipulation. We have implemented this idea in a comprehensive form in the RISC ProgramExplorer, a new program reasoning environment for educational purposes which encompasses the previously developed RISC ProofNavigator as an interactive proving assistant.

Abstract Interpretation of PIC programs through Logic Programming

DEFF Research Database (Denmark)

Henriksen, Kim Steen; Gallagher, John Patrick

2006-01-01

, are applied to the logic based model of the machine. A small PIC microcontroller is used as a case study. An emulator for this microcontroller is written in Prolog, and standard programming transformations and analysis techniques are used to specialise this emulator with respect to a given PIC program....... The specialised emulator can now be further analysed to gain insight into the given program for the PIC microcontroller. The method describes a general framework for applying abstractions, illustrated here by linear constraints and convex hull analysis, to logic programs. Using these techniques on the specialised...

Playing by Programming: Making Gameplay a Programming Activity

Science.gov (United States)

Weintrop, David; Wilensky, Uri

2016-01-01

Video games are an oft-cited reason for young learners getting interested in programming and computer science. As such, many learning opportunities build on this interest by having kids program their own video games. This approach, while sometimes successful, has its drawbacks stemming from the fact that the challenge of programming and game…

40 CFR 68.170 - Prevention program/Program 2.

Science.gov (United States)

2010-07-01

... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.170 Prevention program/Program 2. (a) For each Program 2 process, the owner or operator shall provide in the RMP the information... the process. (c) The name(s) of the chemical(s) covered. (d) The date of the most recent review or...

Verification of Imperative Programs by Constraint Logic Program Transformation

Directory of Open Access Journals (Sweden)

Emanuele De Angelis

2013-09-01

Full Text Available We present a method for verifying partial correctness properties of imperative programs that manipulate integers and arrays by using techniques based on the transformation of constraint logic programs (CLP. We use CLP as a metalanguage for representing imperative programs, their executions, and their properties. First, we encode the correctness of an imperative program, say prog, as the negation of a predicate 'incorrect' defined by a CLP program T. By construction, 'incorrect' holds in the least model of T if and only if the execution of prog from an initial configuration eventually halts in an error configuration. Then, we apply to program T a sequence of transformations that preserve its least model semantics. These transformations are based on well-known transformation rules, such as unfolding and folding, guided by suitable transformation strategies, such as specialization and generalization. The objective of the transformations is to derive a new CLP program TransfT where the predicate 'incorrect' is defined either by (i the fact 'incorrect.' (and in this case prog is not correct, or by (ii the empty set of clauses (and in this case prog is correct. In the case where we derive a CLP program such that neither (i nor (ii holds, we iterate the transformation. Since the problem is undecidable, this process may not terminate. We show through examples that our method can be applied in a rather systematic way, and is amenable to automation by transferring to the field of program verification many techniques developed in the field of program transformation.

Building Strong Geoscience Programs: Perspectives From Three New Programs

Science.gov (United States)

Flood, T. P.; Munk, L.; Anderson, S. W.

2005-12-01

During the past decade, at least sixteen geoscience departments in the U.S. that offer a B.S. degree or higher have been eliminated or dispersed. During that same time, three new geoscience departments with degree-granting programs have been developed. Each program has unique student demographics, affiliation (i.e. public institution versus private liberal arts college), geoscience curricula and reasons for initiation. Some of the common themes for each program include; 1) strong devotion to providing field experiences, 2) commitment to student-faculty collaborative research, 3) maintaining traditional geology program elements in the core curriculum and 4) placing students into high quality graduate programs and geoscience careers. Although the metrics for each school vary, each program can claim success in the area of maintaining solid enrollments. This metric is critical because programs are successful only if they have enough students, either in the major and/or general education courses, to convince administrators that continued support of faculty, including space and funding is warranted. Some perspectives gained through the establishment of these new programs may also be applicable to established programs. The success and personality of a program can be greatly affected by the personality of a single faculty member. Therefore, it may not be in the best interest of a program to distribute programmatic work equally among all faculty. For example, critical responsibilities such as teaching core and introductory courses should be the responsibility of faculty who are fully committed to these pursuits. However, if these responsibilities reduce scholarly output, well-articulated arguments should be developed in order to promote program quality and sustainability rather than individual productivity. Field and undergraduate research experiences should be valued as much as high-quality classroom and laboratory instruction. To gain the support of the administration

Interfacing ANSYS to user's programs using UNIX shell program

Energy Technology Data Exchange (ETDEWEB)

Kim, In Yong; Kim, Beom Shig [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-01-01

It has been considered to be impossible to interface the ANSYS, which is the commercial finite element code and whose program is not open to public, to the other user's program. When the analysis need to be iterated, the user should wait until the analysis is finished and read the ANSYS result to make the input data for every iteration. In this report the direct interfacing techniques between the ANSYS and the other program using UNIX shell programming are proposed. The detail program lists and the application example are also provided. (Author) 19 refs., 6 figs., 7 tabs.

Clean Coal Technology Demonstration Program: Program update 1993

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

75 FR 58468 - Terrorism Risk Insurance Program; Program Loss Reporting

Science.gov (United States)

2010-09-24

... DEPARTMENT OF THE TREASURY Terrorism Risk Insurance Program; Program Loss Reporting AGENCY: Departmental Offices, Terrorism Risk Insurance Program Office, Treasury. ACTION: Notice and request for... 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the Terrorism Risk Insurance Program...

Functional Programming in C# Classic Programming Techniques for Modern Projects

CERN Document Server

Sturm, Oliver

2011-01-01

Take advantage of the growing trend in functional programming. C# is the number-one language used by .NET developers and one of the most popular programming languages in the world. It has many built-in functional programming features, but most are complex and little understood. With the shift to functional programming increasing at a rapid pace, you need to know how to leverage your existing skills to take advantage of this trend. Functional Programming in C# leads you along a path that begins with the historic value of functional ideas. Inside, C# MVP and functional programming expert Oli

PLC Programming

International Nuclear Information System (INIS)

Lee, Seong Jae; Wi, Seong Dong; Yoo, Jong Seon; Kim, Se Chan

2001-02-01

This book tells of PLC programming for KGL-WIN with summary of PLC, performance and function of PLC like characteristic of KGL-WIN, connection method with PLC, basic performance of K200S/K300S/K1000S, diagram of input and output H/W, writing project, staring the program, editing of program, on-line function, debugging and instructions like control, timer and counter, data transmission, comparison, rotation and moving, system, data operating data conversion and application program.

Material Programming

DEFF Research Database (Denmark)

Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

2017-01-01

. Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

Practical C++ programming

National Research Council Canada - National Science Library

Oualline, Steve

2003-01-01

... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 6 3 2. The Basics of Program Writing Programs from Conception to Execution Creating a Real Program Getting Help in Unix Getting Help in an IDE Programming...

Clean Coal Technology Programs: Program Update 2009

Energy Technology Data Exchange (ETDEWEB)

None

2009-10-01

The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

The concentration of active and inactive strontium in some Danube river samples

International Nuclear Information System (INIS)

Koshutich, K.; Lulich, S.

1985-01-01

The following fish species were investigated: Barbus barbus, Acipencer ruthenus, Abramis brama, Stizostedion lucioperca, Silurus glanis, Cyprinus caprio. The samples were collected during 1981. The inactive strontium in the water residue (after evaporation), sediment and fishes ewrw determined by nondestructive neutron activation analysis by using gamma couting system consisted of a 40 cm 3 Ge(Li) semiconductor rystal attached to a 4096-channel pulsehight analyser. The standard solution contained 5x10 -5 g of strontium per 100 lambda. Radioactive strontium was measured after several separation procedures. 90 SrCO 3 in equilibrium with its daughter 90 Y was detected in the β-low-level counting anticoincident system with gas-flow detector. The results confirmed the literature data that the sediment concentrations of the total strontium and the active 90 Sr are several times greater than those in water

A low-level needle counter

International Nuclear Information System (INIS)

Fujita, Y.; Taguchi, Y.; Imamura, M.; Inoue, T.; Tanaka, S.

1977-01-01

A small end-window type gas-flow counter which has a sharpened needle (anode) against the end-window plane (cathode) was developed for low-level counting of β particles to the amount of less than one count per hour in solid sources of relatively high specific activity. The advantage of the needle counter for low-level work is that being of a conical shape the active volume as against the window area is small. The background count rate of 0.0092+-0.0005 cpm was obtained for a 10 mm dia needle counter operating in GM mode and in anticoincidence with a well-type NaI(Tl) guard crystal with massive shields. The counter design and the counter characteristics are presented in detail. The needle counter is simple in design, low-cost and stable in long time operation. (author)

Program overview: Subsurface science program

International Nuclear Information System (INIS)

1994-03-01

The OHER Subsurface Science Program is DOE's core basic research program concerned with subsoils and groundwater. These practices have resulted in contamination by mixtures of organic chemicals, inorganic chemicals, and radionuclides. A primary long-term goal is to provide a foundation of knowledge that will lead to the reduction of environmental risks and to cost-effective cleanup strategies. Since the Program was initiated in 1985, a substantial amount of research in hydrogeology, subsurface microbiology, and the geochemistry of organically complexed radionuclides has been completed, leading to a better understanding of contaminant transport in groundwater and to new insights into microbial distribution and function in the subsurface environments. The Subsurface Science Program focuses on achieving long-term scientific advances that will assist DOE in the following key areas: providing the scientific basis for innovative in situ remediation technologies that are based on a concept of decontamination through benign manipulation of natural systems; understanding the complex mechanisms and process interactions that occur in the subsurface; determining the influence of chemical and geochemical-microbial processes on co-contaminant mobility to reduce environmental risks; improving predictions of contaminant transport that draw on fundamental knowledge of contaminant behavior in the presence of physical and chemical heterogeneities to improve cleanup effectiveness and to predict environmental risks

MatLab Programming for Engineers Having No Formal Programming Knowledge

Science.gov (United States)

Shaykhian, Linda H.; Shaykhian, Gholam Ali

2007-01-01

MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

C++ Programming Language

Science.gov (United States)

Shaykhian, Gholam Ali

2007-01-01

C++ Programming Language: The C++ seminar covers the fundamentals of C++ programming language. The C++ fundamentals are grouped into three parts where each part includes both concept and programming examples aimed at for hands-on practice. The first part covers the functional aspect of C++ programming language with emphasis on function parameters and efficient memory utilization. The second part covers the essential framework of C++ programming language, the object-oriented aspects. Information necessary to evaluate various features of object-oriented programming; including encapsulation, polymorphism and inheritance will be discussed. The last part of the seminar covers template and generic programming. Examples include both user defined and standard templates.

Site Support Program Plan Infrastructure Program

International Nuclear Information System (INIS)

1995-01-01

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site's infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford's infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition

Computer program CDCID: an automated quality control program using CDC update

International Nuclear Information System (INIS)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

General edition program

International Nuclear Information System (INIS)

Vaturi, Sylvain

1969-01-01

Computerized edition is essential for data processing exploitation. When a more or less complex edition program is required for each task, then the need for a general edition program become obvious. The aim of this study is to create a general edition program. Universal programs are capable to execute numerous and varied tasks. For a more precise processing, the execution of which is frequently required, the use of a specialized program is preferable because, contradictory to the universal program, it goes straight to the point [fr

Preretirement Programs within Service Firms: Existing and Planned Programs.

Science.gov (United States)

Siegel, Sidney R.; Rives, Janet M.

1980-01-01

A study of 300 nonmanufacturing firms' current and projected preretirement programs indicated that (1) personnel departments have primary responsibility for existing programs, (2) focus is changing from financial planning to psychological counseling, and (3) such programs benefit the company as well as the employee. (SK)

Performance Demonstration Program Plan for the WIPP Experimental-Waste Characterization Program

International Nuclear Information System (INIS)

1991-02-01

The Performance Demonstration Program is designed to ensure that compliance with the Quality Assurance Objective, identified in the Quality Assurance Program Plan for the WIPP Experimental-Waste Characterization Program (QAPP), is achieved. This Program Plan is intended for use by the WPO to assess the laboratory support provided for the characterization of WIPP TRU waste by the storage/generator sites. Phase 0 of the Performance Demonstration Program encompasses the analysis of headspace gas samples for inorganic and organic components. The WPO will ensure the implementation of this plan by designating an independent organization to coordinate and provide technical oversight for the program (Program Coordinator). Initial program support, regarding the technical oversight and coordination functions, shall be provided by the USEPA-ORP. This plan identifies the criteria that will be used for the evaluation of laboratory performance, the responsibilities of the Program Coordinator, and the responsibilities of the participating laboratories. 5 tabs

Functional Python programming

CERN Document Server

Lott, Steven

2015-01-01

This book is for developers who want to use Python to write programs that lean heavily on functional programming design patterns. You should be comfortable with Python programming, but no knowledge of functional programming paradigms is needed.

Program evaluation: Weatherization Residential Assistance Partnership (WRAP) Program

Energy Technology Data Exchange (ETDEWEB)

1991-12-01

The Connecticut low income weatherization program was developed in response to a 1987 rate docket order from the Connecticut Department of Public Utility Control (DPUC) to Connecticut Light Power Co., an operating subsidiary of Northeast Utilities (NU). (Throughout this report, NU is referred to as the operator of the program.) This program, known as the Weatherization Residential Assistance Partnership, or WRAP, was configured utilizing input from a collaborative group of interested parties to the docket. It was agreed that this program would be put forth by the electric utility, but would not ignore oil and gas savings (thus, it was to be fuel- blind''). The allocated cost of conservation services for each fuel source, however, should be cost effective. It was to be offered to those utility customers at or below 200 percent of the federal poverty levels, and provide a wide array of energy saving measures directed toward heating, water heating and lighting. It was felt by the collaborative group that this program would raise the level of expenditures per participant for weatherization services provided by the state, and by linking to and revising the auditing process for weatherization, would lower the audit unit cost. The program plans ranged from the offering of low-cost heating, water heating and infiltration measures, increased insulation levels, carpentry and plumbing services, to furnace or burner replacement. The program was configured to allow for very comprehensive weatherization and heating system servicing.

Programming for controlling of pulse radiolysis setup. Program RADIO96

International Nuclear Information System (INIS)

Mirkowski, J.; Grodkowski, J.

1998-01-01

Program RADIO96 was written in Pascal using DELPHI 1.0 (Borland) programming platform. It can operate on IBM PC compatible computers in WINDOWS 3x or WINDOWS'95 environment. The program is dedicated to the pulse radiolysis setup based on the linear electron accelerator LAE 13/9 of the Department of Radiation Chemistry and Technology of the INCT. This work was based on apparatus and results described before and also on programming manuals of used equipment and technical data of programming platform. (author)

Programming F#

CERN Document Server

Smith, Chris

2009-01-01

Why learn F#? This multi-paradigm language not only offers you an enormous productivity boost through functional programming, it also lets you develop applications using your existing object-oriented and imperative programming skills. With Programming F#, you'll quickly discover the many advantages of Microsoft's new language, which includes access to all the great tools and libraries of the .NET platform. Learn how to reap the benefits of functional programming for your next project -- whether it's quantitative computing, large-scale data exploration, or even a pursuit of your own. With th

Programming Interactivity

CERN Document Server

Noble, Joshua

2009-01-01

Make cool stuff. If you're a designer or artist without a lot of programming experience, this book will teach you to work with 2D and 3D graphics, sound, physical interaction, and electronic circuitry to create all sorts of interesting and compelling experiences -- online and off. Programming Interactivity explains programming and electrical engineering basics, and introduces three freely available tools created specifically for artists and designers: Processing, a Java-based programming language and environment for building projects on the desktop, Web, or mobile phonesArduino, a system t

Choreographic Programming

DEFF Research Database (Denmark)

Montesi, Fabrizio

, as they offer a concise view of the message flows enacted by a system. For this reason, in the last decade choreographies have been used in the development of programming languages, giving rise to a programming paradigm that in this dissertation we refer to as Choreographic Programming. Recent studies show...... endpoint described in a choreography can then be automatically generated, ensuring that such implementations are safe by construction. However, current formal models for choreographies do not deal with critical aspects of distributed programming, such as asynchrony, mobility, modularity, and multiparty...... sessions; it remains thus unclear whether choreographies can still guarantee safety when dealing with such nontrivial features. This PhD dissertation argues for the suitability of choreographic programming as a paradigm for the development of safe distributed systems. We proceed by investigating its...

Teaching object-oriented programming on top of functional programming

DEFF Research Database (Denmark)

Kristensen, Jens Thyge; Hansen, Michael Reichhardt; Richel, Hans

2001-01-01

programming in the construction of OO programs. This is done following a method where the program design is expressed in SML and afterwards implemented in Java. The use of different languages in design and implementation is an advantage as it makes the distinction between these two stages very clear...

Site Support Program Plan Infrastructure Program

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-26

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site`s infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford`s infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition.

Employee Assistance Programs.

Science.gov (United States)

Levine, Hermine Zagat

1985-01-01

The author reports company responses to a questionnaire concerning employee assistance programs (EAP). Answers concern EAP structure, staff training, use of outside consultant, services provided by EAPs, program administration, employee confidence in EAPs, advertising the program, program philosophy, problems encountered by EAP users, coverage and…

Assembly processor program converts symbolic programming language to machine language

Science.gov (United States)

Pelto, E. V.

1967-01-01

Assembly processor program converts symbolic programming language to machine language. This program translates symbolic codes into computer understandable instructions, assigns locations in storage for successive instructions, and computer locations from symbolic addresses.

75 FR 70083 - Emergency Forest Restoration Program and Emergency Conservation Program

Science.gov (United States)

2010-11-17

... Restoration Program and Emergency Conservation Program AGENCY: Farm Service Agency, USDA. ACTION: Interim rule. SUMMARY: The Farm Service Agency (FSA) is amending regulations as required by the Food, Conservation, and... as follows: PART 701--EMERGENCY CONSERVATION PROGRAM, EMERGENCY FOREST RESTORATION PROGRAM, AND...

Programming with joystick

OpenAIRE

Banič, Nejc

2014-01-01

In this thesis, we implemented a way of programming by means of gaming accessories. The main reason is that to show a diferent way of developing programs, because vast majority of programers are using two input / output devices: keyboard and mouse. These two devices have become standard and will definitely remain so in the future. For our implementation, we used high-level programming language Java and NetBeans integrated development environment. The program is actually a ...

Combining program visualization with programming workspace to assist students for completing programming laboratory task

Directory of Open Access Journals (Sweden)

Elvina Elvina

2018-06-01

Full Text Available Numerous Program Visualization tools (PVs have been developed for assisting novice students to understand their source code further. However, none of them are practical to be used in the context of completing programming laboratory task; students are required to keep switching between PV and programming workspace when they need to know how their code works. This paper combines PV with programming workspace to handle such issue. Resulted tool (which is named PITON has 13 features extracted from PythonTutor, PyCharm, and student’s feedbacks about PythonTutor. According to think-aloud and user study, PITON is more practical to be used than a combination of PythonTutor and PyCharm. Further, its features are considerably helpful; students rated these features as useful and frequently used.

An Attempt of Making Program-Generated Animation in a Beginners’ Programming Class

Science.gov (United States)

Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

In general, mathematical subjects are used for programming education in universities. In this case, many students lose the interest in the programming because the students have the preconception that is difficult to program by using the mathematical expressions. Especially beginners of the programming are a tendency to lose the interest. Therefore it is pointed out to use the subjects which do not need mathematical knowledge as much as possible. In this paper the authors have tried to make animation that are generated by programs instead of the mathematical subjects in a beginners’ programming class using C language used in a wide-ranging field. The authors discuss about improvements of the interest of students for programming by the try that is to make animation by programs in a programming class and refer to its effects.

Clean Coal Technology Programs: Program Update 2003 (Volume 1)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Active sites environmental monitoring Program - Program Plan: Revision 2

International Nuclear Information System (INIS)

Morrissey, C.M.; Hicks, D.S.; Ashwood, T.L.; Cunningham, G.R.

1994-05-01

The Active Sites Environmental Monitoring Program (ASEMP), initiated in 1989, provides early detection and performance monitoring of active low-level-waste (LLW) and transuranic (TRU) waste facilities at Oak Ridge National Laboratory (ORNL). Several changes have recently occurred in regard to the sites that are currently used for waste storage and disposal. These changes require a second set of revisions to the ASEMP program plan. This document incorporates those revisions. This program plan presents the organization and procedures for monitoring the active sites. The program plan also provides internal reporting levels to guide the evaluation of monitoring results

NASA Graduate Student Researchers Program Ronald E. McNair PhD Program

Science.gov (United States)

Howard, Sunnie

1998-01-01

The NASA Ronald E. McNair PHD Program was funded in September 1995. Implementation began during the spring of 1996. The deferment of the actual program initial semester enabled the program to continue support through the fall semester of 1998. This was accomplished by a no-cost extension from August 15, 1998 through December 31, 1998. There were 12 fellows supported by the program in 1996, 15 fellows in 1997, and 15 fellows 1998. Current program capacity is 15 fellows per funding support. Support for the academic outreach component began in spring 1998. The program was named the "Good Enough" Crew Activity (GECA) in honor of Dr. McNair's philosophy of everyone being good enough to achieve anything they want bad enough. The program currently enrolls 65 students from the third through the eight grades. The program is held 12 Saturdays per semester. The time is 9:00 AM to 12:30 PM each Saturday Morning. Program direction and facilitation is jointly administered with the PHD fellows and the Saturday Academy staff. Dr. John Kelly, REM-PHD Principal Investigator serves in a program oversight and leadership capacity. Ms. Sunnie Howard, The NASA REM-PHD Administrative Coordinator serves in an administrative and logistical capacity. Mr. Aaron Hatch, the NASA-AMES Liaison Officer, serve@'in a consultative and curriculum review capacity. The first recognition activity will be held on December 12, 1998, with the students, parents, faculty, PHD fellows, and other local student support services persons. Program outreach efforts are jointly supported by the NASA REM-PHD Program and the National Space Grant College and Fellowship Program. The Ph.D. program reached its first milestone in May 1998. North Carolina A&T State University graduated the first Ph.D. fellows. The first three Ph.D. Alumni were Ronald E. McNair PHD Program Fellows. It is hoped that this is just the beginning of a highly acclaimed doctoral program. The ultimate program success will be recognized when the

Implementing corporate wellness programs: a business approach to program planning.

Science.gov (United States)

Helmer, D C; Dunn, L M; Eaton, K; Macedonio, C; Lubritz, L

1995-11-01

1. Support of key decision makers is critical to the successful implementation of a corporate wellness program. Therefore, the program implementation plan must be communicated in a format and language readily understood by business people. 2. A business approach to corporate wellness program planning provides a standardized way to communicate the implementation plan. 3. A business approach incorporates the program planning components in a format that ranges from general to specific. This approach allows for flexibility and responsiveness to changes in program planning. 4. Components of the business approach are the executive summary, purpose, background, ground rules, approach, requirements, scope of work, schedule, and financials.

Cavity design programs

International Nuclear Information System (INIS)

Nelson, E.M.

1996-01-01

Numerous computer programs are available to help accelerator physicists and engineers model and design accelerator cavities and other microwave components. This article discusses the problems these programs solve and the principles upon which these programs are based. Some examples of how these programs are used in the design of accelerator cavities are also given

Employee assistance programs: history and program description.

Science.gov (United States)

Gilbert, B

1994-10-01

1. The history and development of Employee Assistance Programs (EAPs) can be traced back to the 1800s. There are currently over 10,000 EAPs in the United States. 2. Standards for program accreditation and counselor certification have been established for EAPs. The "core technology of Employee Assistance Programs" includes identification of behavioural problems based on job performance issues, expert consultation with supervisors, appropriate use of constructive confrontation, microlinkages with treatment providers and resources, macrolinkages between providers, resources, and work organizations, focus on substance abuse, and evaluation of employee success based on job performance. 3. Some EAPs take a broad brush approach, and incorporate health promotion and managed care functions.

FY85 Program plan for the Defense Transuranic Waste Program (DTWP)

International Nuclear Information System (INIS)

1984-11-01

The Defense TRU Waste Program (DTWP) is the focal point for the Department of Energy in national planning, integration, and technical development for TRU waste management. The scope of this program extends from the point of TRU waste generation through delivery to a permanent repository. The TRU program maintains a close interface with repository development to ensure program compatibility and coordination. The defense TRU program does not directly address commercial activities that generate TRU waste. Instead, it is concerned with providing alternatives to manage existing and future defense TRU wastes. The FY85 Program Plan is consistent with the Defense TRU Waste Program goals and objectives stated in the Defense Transuranic Waste Program Strategy Document, January 1984. The roles of participants, the responsibilities and authorities for Research and Development (R and D), the organizational interfaces and communication channels for R and D and the establishment of procedures for planning, reporting, and budgeting of all R and D activities meet requirements stated in the Technical Management Plan for the Transuranic Waste Management Program. The Program Plan is revised as needed. The work breakdown structure is reflected graphically immediately following the Administration section and is described in the subsequent narrative. Detailed budget planning (i.e., programmatic funding and capital equipment) is presented for FY85; outyear budget projections are presented for future years

An Intelligent Robot Programing

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong Yong

2012-01-15

This book introduces an intelligent robot programing with background of the begging, introduction of VPL, and SPL, building of environment for robot platform, starting of robot programing, design of simulation environment, robot autonomy drive control programing, simulation graphic. Such as SPL graphic programing graphical image and graphical shapes, and graphical method application, application of procedure for robot control, robot multiprogramming, robot bumper sensor programing, robot LRF sencor programing and robot color sensor programing.

Purely Functional Structured Programming

OpenAIRE

Obua, Steven

2010-01-01

The idea of functional programming has played a big role in shaping today's landscape of mainstream programming languages. Another concept that dominates the current programming style is Dijkstra's structured programming. Both concepts have been successfully married, for example in the programming language Scala. This paper proposes how the same can be achieved for structured programming and PURELY functional programming via the notion of LINEAR SCOPE. One advantage of this proposal is that m...

An Intelligent Robot Programing

International Nuclear Information System (INIS)

Hong, Seong Yong

2012-01-01

This book introduces an intelligent robot programing with background of the begging, introduction of VPL, and SPL, building of environment for robot platform, starting of robot programing, design of simulation environment, robot autonomy drive control programing, simulation graphic. Such as SPL graphic programing graphical image and graphical shapes, and graphical method application, application of procedure for robot control, robot multiprogramming, robot bumper sensor programing, robot LRF sencor programing and robot color sensor programing.

Multi-dimensional Rankings, Program Termination, and Complexity Bounds of Flowchart Programs

OpenAIRE

Alias , Christophe; Darte , Alain; Feautrier , Paul; Gonnord , Laure

2010-01-01

International audience; Proving the termination of a flowchart program can be done by exhibiting a ranking function, i.e., a function from the program states to a well-founded set, which strictly decreases at each program step. A standard method to automatically generate such a function is to compute invariants for each program point and to search for a ranking in a restricted class of functions that can be handled with linear programming techniques. Previous algorithms based on affine rankin...

Programming in COBOL

CERN Document Server

Lancaster, G T

2014-01-01

Programming in COBOL is a simple yet concise how-to book that teaches the programming language in a short yet effective step-by-step manner, which can be easily understood by anyone with sufficient knowledge in information technology. Covering first the advantages of COBOL over other programming languages, the book discusses COBOL's divisions - identification, environment, procedure, and data, and then describes the testing of the COBOL source programs and program questions. The book is valuable for those who wish to learn basic COBOL language, but do not have the time to take manufacturers' o

Fusion Energy Postdoctoral Research Program, Professional Development Program: FY 1987 annual report

International Nuclear Information System (INIS)

1988-01-01

In FY 1986, Oak Ridge Associated Universities (ORAU) initiated two programs for the US Department of Energy (DOE), Office of Fusion Energy (OFE): the Fusion Energy Postdoctoral Research Program and the Fusion Energy Professional Development Program. These programs provide opportunities to conduct collaborative research in magnetic fusion energy research and development programs at DOE laboratories and contractor sites. Participants become trained in advanced fusion energy research, interact with outstanding professionals, and become familiar with energy-related national issues while making personal contributions to the search for solutions to scientific problems. Both programs enhance the national fusion energy research and development effort by providing channels for the exchange of scientists and engineers, the diffusion of ideas and knowledge, and the transfer of relevant technologies. These programs, along with the Magnetic Fusion Energy Science and Technology Fellowship Programs, compose the fusion energy manpower development programs administered by ORAU for DOE/OFE

Program Fullerene

DEFF Research Database (Denmark)

Wirz, Lukas; Peter, Schwerdtfeger,; Avery, James Emil

2013-01-01

Fullerene (Version 4.4), is a general purpose open-source program that can generate any fullerene isomer, perform topological and graph theoretical analysis, as well as calculate a number of physical and chemical properties. The program creates symmetric planar drawings of the fullerene graph, an......-Fowler, and Brinkmann-Fowler vertex insertions. The program is written in standard Fortran and C++, and can easily be installed on a Linux or UNIX environment....

SPOT Program

Science.gov (United States)

Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard;

Effectiveness and Successful Program Elements of SOAR’s Afterschool Programs

Directory of Open Access Journals (Sweden)

Janet L. Johnson

2007-03-01

Full Text Available Project SOAR provided after-school programs that afforded expanded learning opportunities to help students succeed in local public schools and to contribute to the general welfare of the community. Program components focused on building students’ academic skills and positive attitudes, aided by teachers, mentors, parent education, and local agencies. Instructional programs were conducted to help reduce drug use and violence. Activities included academic assistance, technology training, mentoring, service learning projects, and education in life skills and the arts. Parent involvement was encouraged. Behavioral and academic outcomes—especially at the high school level—were analyzed to determine program effectiveness regarding academic achievement, dropout rates, and rates and frequency of suspensions. Successful program elements and strategies are noted.

Nuclear Power Infrastructure Development Program: Korean Education Program

International Nuclear Information System (INIS)

Choi, Sung Yeol; Hwang, Il Soon; Kim, Si Hwan

2009-01-01

Many countries have decided nuclear power for next energy resources as one of the long-term energy supply options. IAEA projected nuclear power expansion up to 2030 reaching between 447 GWe and 691 GWe compared to 370 GWe and 2660 TWh at the end of 2006. Both low and high projection is accompanied with new nuclear power plant constructions respectively 178 and 357, about 11 units per year, and most new construction is in North America, the Far East, Eastern Europe, the Middle East, and Southeast Asia. During the last forty years, thirty three countries have established commercial nuclear power programs but only some of them have developed comprehensive and large scale peaceful nuclear power infrastructure. Although various cooperation and guidance program of nuclear power infrastructure, developing appropriate environment and infrastructure of nuclear power plant is still challenging problems for developing countries launching nuclear power program. With increasing the demand of safety and safeguard from international society, creating appropriate infrastructure becomes essential requirements in national nuclear power program. In the viewpoint of developing countries, without sufficient explanation and proper guidance, infrastructure could be seen only as another barrier in its nuclear power program. The importance of infrastructure development would be obscured by ostensible business and infrastructure program can result in increasing entering barriers to peaceful nuclear power application field without benefits to developing countries and international community. To avoid this situation by providing enough explanation and realistic case example and cooperate with the countries wanting to establish comprehensive nuclear power infrastructure in the peaceful applications, we are creating the education program of infrastructure development with basic guidelines of the IAEA infrastructure series and Korean experiences from least developed country to advanced country

NEK AOV program

International Nuclear Information System (INIS)

Fable, D.; Andric, A.; Prah, M.; Habinc, M.

2002-01-01

Air Operated Valves (AOVs) are used in a wide variety of applications in nuclear power plants. Some AOVs perform important functions in safety and non-safety related systems which could affect initiating event frequencies, accident mitigation and radiological releases. A review of lessons learned from nuclear plant MOV programs and pilot AOV programs indicates that AOV performance can be enhanced via improvements in valve and actuator sizing, setup, testing and maintenance. Nuklearna elektrarna Krsko has decided to develop an AOV program on the basis of Joint Owners. Group (JOG) AOV Program, which identifies nine key elements for successful implementation. The first step in establishing an AOV Program is to identify and categorize the plant AOVs for evaluation. Performed categorization in NEK has resulted with Preliminary AOV Scope. Important part of NEK AOV Program is NEK AOV Database. For the time being, basic structure with tables, queries, forms, reports and relationships has been created. Further development will be coordinated with development of NEK AOV Program Methodology.(author)

Utility green pricing programs: a statistical analysis of program effectiveness

International Nuclear Information System (INIS)

Ryan, W.; Scott, O.; Lori, B.; Blair, S.

2005-01-01

Utility green pricing programs represent one way in which consumers can voluntarily support the development of renewable energy. The design features and effectiveness of these programs varies considerably. Based on a survey of utility program managers in the United States, this article provides insight into which program features might help maximize both customer participation in green pricing programs and the amount of renewable energy purchased by customers in those programs. We find that program length has a substantial impact on customer participation and purchases; to achieve higher levels of success, utilities will need to remain committed to their product offering for some time. Our findings also suggest that utilities should consider higher renewable energy purchase thresholds for residential customers in order to maximize renewable energy sales. Smaller utilities are found to be more successful than larger utilities, and we find some evidence that providing private benefits to nonresidential participants can enhance success. Interestingly, we find little evidence that the cost of the green pricing product greatly impacts customer participation and renewable energy sales, at least over the narrow range of premiums embedded in our data set, and for the initial set of green power purchasers. (author)

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific-analysis computer programs for year-2000 compliance is part of AECL' s year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific analysis computer programs for year-2000 compliance is part of AECL's year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

Effective Programming

DEFF Research Database (Denmark)

Frost, Jacob

To investigate the use of VTLoE as a basis for formal derivation of functional programs with effects. As a part of the process, a number of issues central to effective formal programming are considered. In particular it is considered how to develop a proof system suitable for pratical reasoning......, how to implement this system in the generic proof assistant Isabelle and finally how to apply the logic and the implementation to programming....

Transgenerational developmental programming.

Science.gov (United States)

Aiken, Catherine E; Ozanne, Susan E

2014-01-01

The concept of developmental programming suggests that the early life environment influences offspring characteristics in later life, including the propensity to develop diseases such as the metabolic syndrome. There is now growing evidence that the effects of developmental programming may also manifest in further generations without further suboptimal exposure. This review considers the evidence, primarily from rodent models, for effects persisting to subsequent generations, and evaluates the mechanisms by which developmental programming may be transmitted to further generations. In particular, we focus on the potential role of the intrauterine environment in contributing to a developmentally programmed phenotype in subsequent generations. The literature was systematically searched at http://pubmed.org and http://scholar.google.com to identify published findings regarding transgenerational (F2 and beyond) developmental programming effects in human populations and animal models. Transmission of programming effects is often viewed as a form of epigenetic inheritance, either via the maternal or paternal line. Evidence exists for both germline and somatic inheritance of epigenetic modifications which may be responsible for phenotypic changes in further generations. However, there is increasing evidence for the role of both extra-genomic components of the zygote and the interaction of the developing conceptus with the intrauterine environment in propagating programming effects. The contribution of a suboptimal reproductive tract environment or maternal adaptations to pregnancy may be critical to inheritance of programming effects via the maternal line. As the effects of age exacerbate the programmed metabolic phenotype, advancing maternal age may increase the likelihood of developmental programming effects being transmitted to further generations. We suggest that developmental programming effects could be propagated through the maternal line de novo in generations

An Analysis on Distance Education Computer Programming Students' Attitudes Regarding Programming and Their Self-Efficacy for Programming

Science.gov (United States)

Ozyurt, Ozcan

2015-01-01

This study aims to analyze the attitudes of students studying computer programming through the distance education regarding programming, and their self-efficacy for programming and the relation between these two factors. The study is conducted with 104 students being thought with distance education in a university in the north region of Turkey in…

Mixed language programming

International Nuclear Information System (INIS)

Burow, Burkhard D.

1996-01-01

Computing in the next millennium will be using software from this millennium. Programming languages evolve and new ones continue to be created. The use of legacy code demonstrates why some present and future applications may span programming languages. Even a completely new application may mix programming languages, if it allows its components to be more conveniently expressed. Given the need, mixed language programming should be easy and robust. By resolving a variety of difficulties, the well established cfortran.h package provides, the desired convenient interface across the C and Fortran programming languages, as demonstrated using CERN's Book. (author)

Short rotation woody crops program: 1982 program summary

Energy Technology Data Exchange (ETDEWEB)

Ranney, J.W.; Cushman, J.H.; Trimble, J.L.

1982-09-01

The general objective and overall approach of the program are discussed, and the status, specific goals, and recent results of the three major research areas are presented. The report concludes with brief summaries of the individual research projects in the program.

Analysis of the Education Program Approval Process: A Program Evaluation.

Science.gov (United States)

Fountaine, Charles A.; And Others

A study of the education program approval process involving the Veterans Administration (VA) and the State Approving Agencies (SAAs) had the following objectives: to describe the present education program approval process; to determine time and costs associated with the education program approval process; to describe the approval process at…

14 CFR 91.1411 - Continuous airworthiness maintenance program use by fractional ownership program manager.

Science.gov (United States)

2010-01-01

... program use by fractional ownership program manager. 91.1411 Section 91.1411 Aeronautics and Space FEDERAL... airworthiness maintenance program use by fractional ownership program manager. Fractional ownership program... through 91.1443. Any program manager who elects to maintain the program aircraft using a continuous...

Program reference schedule baseline

International Nuclear Information System (INIS)

1986-07-01

This Program Reference Schedule Baseline (PRSB) provides the baseline Program-level milestones and associated schedules for the Civilian Radioactive Waste Management Program. It integrates all Program-level schedule-related activities. This schedule baseline will be used by the Director, Office of Civilian Radioactive Waste Management (OCRWM), and his staff to monitor compliance with Program objectives. Chapter 1 includes brief discussions concerning the relationship of the PRSB to the Program Reference Cost Baseline (PRCB), the Mission Plan, the Project Decision Schedule, the Total System Life Cycle Cost report, the Program Management Information System report, the Program Milestone Review, annual budget preparation, and system element plans. Chapter 2 includes the identification of all Level 0, or Program-level, milestones, while Chapter 3 presents and discusses the critical path schedules that correspond to those Level 0 milestones

Recommended programming practices to facilitate the portability of science computer programs

International Nuclear Information System (INIS)

Anon.

1983-01-01

This standard recommends programming practices to facilitate the portability of computer programs prepared for scientific and engineering computations. These practices are intended to simplify implementation, conversion, and modification of computer programs

78 FR 40084 - Proposed Requirement-Migrant Education Program Consortium Incentive Grant Program

Science.gov (United States)

2013-07-03

... DEPARTMENT OF EDUCATION 34 CFR Chapter II Proposed Requirement--Migrant Education Program... educational agencies (SEAs) under the Migrant Education Program (MEP) Consortium Incentive Grant (CIG) Program... the interstate or intrastate coordination of migrant education programs by addressing key needs of...

Medical student education program in Alzheimer’s disease: The PAIRS Program

Directory of Open Access Journals (Sweden)

Jefferson Angela L

2012-08-01

Full Text Available Abstract Background As life expectancy increases, dementia incidence will also increase, creating a greater need for physicians well-trained to provide integrated geriatric care. However, research suggests medical students have limited knowledge or interest in pursuing geriatric or dementia care. The purpose of this study is to evaluate the PAIRS Program and its effectiveness in enhancing medical education as a service-learning activity and replication model for the Buddy ProgramTM. Methods Between 2007 and 2011, four consecutive classes of first year Boston University School of Medicine students (n = 45; 24 ± 3 years, 58% female, 53% White participated in a year-long program in which they were paired with a patient with early-stage Alzheimer’s disease (AD. Assessments included pre- and post-program dementia knowledge tests and a post-program reflective essay. Results Program completion was 100% (n = 45. A paired-sample t-test revealed a modest improvement in dementia knowledge post-program (p  Conclusions Quantitative and qualitative findings suggest that the PAIRS Program can enhance the acquisition of knowledge, skills, and positive attitudes regarding geriatric healthcare in future generations of physicians, a skill set that is becoming increasingly relevant in light of the rapidly aging population. Furthermore, results suggest that The Buddy ProgramTM model can be successfully replicated.

Integrated hydrogen control solutions for severe accidents using passive autocatalytic recombiners

International Nuclear Information System (INIS)

Bauer, M.; Tietsch, W.; Sabate Farnos, R.

2012-01-01

In a severe accident or a beyond-design-basis-accident, the reaction of water with zirconium alloy cladding, radiolysis of water, corium-concrete reactions and other corrosion phenomena generate hydrogen (H2). The detonation of this H2 in containment or in auxiliary buildings can result in damage to structures or loss of containment integrity. Identifying the generation and special distribution of hydrogen and controlling its concentration with Passive Autocatalytic Recombiners (PARs) solves this concern. Westinghouse's approach for hydrogen management starts by defining the quantities and transport/distribution of H 2 in-containment and out of containment with analysis tools such as MAAP, MELCOR, GASFLOW or FATE. Based on the results of these analyses, an optimized H2 Control Strategy is proposed in terms of number and location of PARs, and efficient integration with other H 2 management devices like e.g. existing igniters, H 2 monitors, etc.

LASERS: Parameters of a trigatron-driven low-pulse-repetition-rate TEA CO2 laser preionised by a surface corona discharge

Science.gov (United States)

Aram, M.; Behjat, A.; Shabanzadeh, M.; Mansori, F.

2007-01-01

The design of a TEA CO2 laser with UV preionisation by a surface corona discharge is described and the dependences of its average output energy on the gas-flow rate, discharge voltage and pulse repetition rate are presented. The scheme of the electric circuit and the geometry of the pre-ionisation system are considered. The electric circuit is designed to produce only impulse voltage difference between the laser electrodes. The triggering system of the trigatron is used to prevent the appearance of the arc. The dependences of the current, voltage and average output energy on the gas-mixture composition and applied voltages at a low pulse repetition rate are presented. The central output wavelength of the laser was measured with an IR spectrometer. Lasing at two adjacent vibrational-rotational transitions of the CO2 molecule was observed, which demonstrates the possibility of simultaneous lasing at several lines.

Parameters of a trigatron-driven low-pulse-repetition-rate TEA CO2 laser preionised by a surface corona discharge

International Nuclear Information System (INIS)

Aram, M; Shabanzadeh, M; Mansori, F; Behjat, A

2007-01-01

The design of a TEA CO 2 laser with UV preionisation by a surface corona discharge is described and the dependences of its average output energy on the gas-flow rate, discharge voltage and pulse repetition rate are presented. The scheme of the electric circuit and the geometry of the pre-ionisation system are considered. The electric circuit is designed to produce only impulse voltage difference between the laser electrodes. The triggering system of the trigatron is used to prevent the appearance of the arc. The dependences of the current, voltage and average output energy on the gas-mixture composition and applied voltages at a low pulse repetition rate are presented. The central output wavelength of the laser was measured with an IR spectrometer. Lasing at two adjacent vibrational-rotational transitions of the CO 2 molecule was observed, which demonstrates the possibility of simultaneous lasing at several lines. (lasers)

Portal monitor evaluation and test procedure

International Nuclear Information System (INIS)

Johnson, L.O.; Gupta, V.P.; Stevenson, R.L.; Rich, B.L.

1983-10-01

The purpose was to develop techniques and procedures to allow users to measure performance and sensitivity of portal monitors. Additionally, a methodology was developed to assist users in optimizing monitor performance. The two monitors tested utilized thin-window gas-flow proportional counters sensitive to beta and gamma radiation. Various tests were performed: a) background count rate and the statistical variability, b) detector efficiency at different distances, c) moving source sensitivity for various size sources and speeds, and d) false alarm rates at different background levels. A model was developed for the moving source measurements to compare the experimental data with measured results, and to test whether it is possible to adequately model the behavior of a portal monitor's response to a moving source. The model results were compared with the actual test results. A procedure for testing portal monitors is also given. 1 reference, 9 figures, 8 tables

Evaluation of the Health Rocks! Program: The Association of Youth Engagement with Program Outcomes

Directory of Open Access Journals (Sweden)

Yan Xia

2017-01-01

Full Text Available This evaluation research examined the relationship between program process and program outcome, specifically, youth engagement in the national 4-H Council Health Rocks! program and their program outcomes.  Based on program evaluation surveys completed after the program by participants, youths’ engagement in the program was associated with their gains in knowledge and skills about substance use, and personal assets related to avoiding risks.  When youth participants find a program interesting, are actively engaged in the program, and find the program staff friendly, they benefit more from the program.  Findings underscore the importance of engaging curriculum and friendly staff to the success of extension or afterschool youth programs. The evaluation method may offer an example of balancing rigor of evaluation design and feasibility of implementing an evaluation.

Research Program Overview

Science.gov (United States)

PEER logo Pacific Earthquake Engineering Research Center home about peer news events research products laboratories publications nisee b.i.p. members education FAQs links research Research Program Overview Tall Buildings Initiative Transportation Research Program Lifelines Program Concrete Grand

Programming Guidelines for FBD Programs in Reactor Protection System Software

International Nuclear Information System (INIS)

Jung, Se Jin; Lee, Dong Ah; Kim, Eui Sub; Yoo, Jun Beom; Lee, Jang Su

2014-01-01

Properties of programming languages, such as reliability, traceability, etc., play important roles in software development to improve safety. Several researches are proposed guidelines about programming to increase the dependability of software which is developed for safety critical systems. Misra-c is a widely accepted programming guidelines for the C language especially in the sector of vehicle industry. NUREG/CR-6463 helps engineers in nuclear industry develop software in nuclear power plant systems more dependably. FBD (Function Block Diagram), which is one of programming languages defined in IEC 61131-3 standard, is often used for software development of PLC (programmable logic controllers) in nuclear power plants. Software development for critical systems using FBD needs strict guidelines, because FBD is a general language and has easily mistakable elements. There are researches about guidelines for IEC 61131-3 programming languages. They, however, do not specify details about how to use languages. This paper proposes new guidelines for the FBD based on NUREG/CR-6463. The paper introduces a CASE (Computer-Aided Software Engineering) tool to check FBD programs with the new guidelines and shows availability with a case study using a FBD program in a reactor protection system. The paper is organized as follows

Programming Guidelines for FBD Programs in Reactor Protection System Software

Energy Technology Data Exchange (ETDEWEB)

Jung, Se Jin; Lee, Dong Ah; Kim, Eui Sub; Yoo, Jun Beom [Division of Computer Science and Engineering College of Information and Communication, Konkuk University, Seoul (Korea, Republic of); Lee, Jang Su [Man-Machine Interface System team Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

Properties of programming languages, such as reliability, traceability, etc., play important roles in software development to improve safety. Several researches are proposed guidelines about programming to increase the dependability of software which is developed for safety critical systems. Misra-c is a widely accepted programming guidelines for the C language especially in the sector of vehicle industry. NUREG/CR-6463 helps engineers in nuclear industry develop software in nuclear power plant systems more dependably. FBD (Function Block Diagram), which is one of programming languages defined in IEC 61131-3 standard, is often used for software development of PLC (programmable logic controllers) in nuclear power plants. Software development for critical systems using FBD needs strict guidelines, because FBD is a general language and has easily mistakable elements. There are researches about guidelines for IEC 61131-3 programming languages. They, however, do not specify details about how to use languages. This paper proposes new guidelines for the FBD based on NUREG/CR-6463. The paper introduces a CASE (Computer-Aided Software Engineering) tool to check FBD programs with the new guidelines and shows availability with a case study using a FBD program in a reactor protection system. The paper is organized as follows.

IMPACT OF THE U.S. SUPPORT PROGRAM SAFEGUARDS INTERNSHIP PROGRAM

International Nuclear Information System (INIS)

PEPPER, S.; OSIECKI, C.

2006-01-01

The U.S. Support Program began funding an internship program in the IAEA Department of Safeguards in 2002. Since that time, 39 U.S. citizens and permanent residents have been placed in one-year, paid internships with the IAEA. The management of the internship program was originally the responsibility of the International Safeguards Project Office but was transferred to the Office of Educational Programs at Brookhaven National Laboratory in 2004. Feedback on the internship program from the U.S. government and the IAEA has been positive. The interns have completed basic yet essential work for the Department of Safeguards and freed IAEA staff members to perform more complex tasks. The cost of an intern is low relative to other forms of human resources support. After the conclusion of their assignments, many of the interns go on to work for the U.S. government, the national laboratories, or companies in international safeguards and nonproliferation. This paper will discuss the work done by the interns for the IAEA, factors influencing the success of the internship program, and the effects the program has had on the careers of interns, in preparing the next generation to work in the nuclear industry, participation in INMM activities, and recruitment for U.S. citizens for safeguards positions

Clean Coal Technology Demonstration Program. Program update 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

75 FR 67751 - Medicare Program: Community-Based Care Transitions Program (CCTP) Meeting

Science.gov (United States)

2010-11-03

...] Medicare Program: Community-Based Care Transitions Program (CCTP) Meeting AGENCY: Centers for Medicare... guidance and ask questions about the upcoming Community-based Care Transitions Program. The meeting is open... conference will also provide an overview of the Community-based Care Transitions Program (CCTP) and provide...

SSCL quality program overview

International Nuclear Information System (INIS)

Hedderick, R.V.; Threatt, D.C.

1992-01-01

The Quality Program for the Superconducing Super Collider Laboratory (SSCL) was developed for a number of reasons. The need for a quality program not only is a contractual requirement, but it also makes good economic sense to implement such a program. The quality program is the device used to coordinate the activities of different Laboratory organizations, such as Engineering and Procurement, and to improve operational reliability and safety. To be successful, the QA Program not only must satisfy Department of Energy (DOE) requirements and provide for flowdown of requirements to performing organizations, but must also be flexible enough so that the program is tailored to meet the needs of each internal organization. The keys to success are management support, acceptance by personnel, and cost effectiveness. These three items are assured by involving appropriate management at each step of program development, by personnel training and by feedback, and by programs to reduce defects and improve quality. Equally valuable is involvement of key organizations in program development. We will describe the basic SSCL Quality Program requirements, how the requirements are tailored to the needs of Laboratory organizations, and how the effectiveness of the program is validated

UNDERSTANDING THE RELATIONSHIPS OF PROGRAM SATISFACTION, PROGRAM LOYALTY AND STORE LOYALTY AMONG CARDHOLDERS OF LOYALTY PROGRAMS

OpenAIRE

Nor Asiah Omar; Norzalita Abd. Aziz; Muhamad Azrin Nazri

2011-01-01

Loyalty programs have increasingly attracted interest in both academic marketing research and practice. One major factor that has been increasingly discussed is loyalty. In this study we examine the influence of cardholders' satisfaction on loyalty (program loyalty and store loyalty) in a retail context, namely, in department stores and superstores. Data were collected from 400 cardholders of a retail loyalty program in Klang Valley, Malaysia via the drop-off-and-collect technique. Structural...

Icobj Programming

OpenAIRE

Boussinot , Frédéric

1996-01-01

A simple and fully graphical programming method is presented, using a powerful means to combine behaviors. This programming is based on the notion of an «icobj» which has a behavioral aspect («object» part), a graphical aspect («icon» part), with an «animation» aspect. Icobj programming provides parallelism, broadcast event communication and migration through the network. An experimental system based on this approach is described in details. Its implementation with reactive scripts is also pr...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Membership Directory 2017 Annual Meeting 2016 Annual Meeting Women's Committee Mentorship Program Outside Activities ACS Archives Contact Us Quality Programs Quality Programs Overview About Quality Programs ACS ...

The Army Preposition Afloat Program: Is It a Program We Need?

National Research Council Canada - National Science Library

Curl, William

1998-01-01

... of most required classes. This paper addresses the evolution of the APA program, describes the current and planned APA program, discusses management of the APA, and looks critically at the value of the program in support...

RIPE [robot independent programming environment]: A robot independent programming environment

International Nuclear Information System (INIS)

Miller, D.J.; Lennox, R.C.

1990-01-01

Remote manual operations in radiation environments are typically performed very slowly. Sensor-based computer-controlled robots hold great promise for increasing the speed and safety of remote operations; however, the programming of robotic systems has proven to be expensive and difficult. Generalized approaches to robot programming that reuse available software modules and employ programming languages which are independent of the specific robotic and sensory devices being used are needed to speed software development and increase overall system reliability. This paper discusses the robot independent programming environment (RIPE) developed at Sandia National Laboratories (SNL). The RIPE is an object-oriented approach to robot system architectures; it is a software environment that facilitates rapid design and implementation of complex robot systems for diverse applications. An architecture based on hierarchies of distributed multiprocessors provides the computing platform for a layered programming structure that models applications using software objects. These objects are designed to support model-based automated programming of robotic and machining devices, real-time sensor-based control, error handling, and robust communication

76 FR 27986 - Funding for the Conservation Loan Program; Farm Loan Programs

Science.gov (United States)

2011-05-13

... for the Conservation Loan Program; Farm Loan Programs AGENCY: Farm Service Agency, USDA. ACTION... or guaranteed loan applications for the Conservation Loan (CL) Program because of lack of program... provisions to the existing direct and guaranteed loan regulations found in 7 CFR parts 761, 762, 764, 765...

Programming Models in HPC

Energy Technology Data Exchange (ETDEWEB)

Shipman, Galen M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-06-13

These are the slides for a presentation on programming models in HPC, at the Los Alamos National Laboratory's Parallel Computing Summer School. The following topics are covered: Flynn's Taxonomy of computer architectures; single instruction single data; single instruction multiple data; multiple instruction multiple data; address space organization; definition of Trinity (Intel Xeon-Phi is a MIMD architecture); single program multiple data; multiple program multiple data; ExMatEx workflow overview; definition of a programming model, programming languages, runtime systems; programming model and environments; MPI (Message Passing Interface); OpenMP; Kokkos (Performance Portable Thread-Parallel Programming Model); Kokkos abstractions, patterns, policies, and spaces; RAJA, a systematic approach to node-level portability and tuning; overview of the Legion Programming Model; mapping tasks and data to hardware resources; interoperability: supporting task-level models; Legion S3D execution and performance details; workflow, integration of external resources into the programming model.

Generating Consistent Program Tutorials

DEFF Research Database (Denmark)

Vestdam, Thomas

2002-01-01

In this paper we present a tool that supports construction of program tutorials. A program tutorial provides the reader with an understanding of an example program by interleaving fragments of source code and explaining text. An example program can for example illustrate how to use a library or a......, and we see potential in using the tool to produce program tutorials to be used for frameworks, libraries, and in educational contexts.......In this paper we present a tool that supports construction of program tutorials. A program tutorial provides the reader with an understanding of an example program by interleaving fragments of source code and explaining text. An example program can for example illustrate how to use a library...... or a framework. We present a means for specifying the fragments of a program that are to be in-lined in the tutorial text. These in-line fragments are defined by addressing named syntactical elements, such as classes and methods, but it is also possible to address individual code lines by labeling them...

Program History

Science.gov (United States)

Learn how the National Cancer Institute transitioned the former Cooperative Groups Program to the National Clinical Trials Network (NCTN) program. The NCTN gives funds and other support to cancer research organizations to conduct cancer clinical trials.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Continuous Certification Requirements SSR Login MIPS Resources and Education Quality and Safety Conference Trauma Trauma Programs Trauma Programs About Trauma Programs Violence Prevention BleedingControl.org Trauma Quality Programs National Trauma ...

Environmental conditions analysis program

International Nuclear Information System (INIS)

Holten, J.

1991-01-01

The PC-based program discussed in this paper has the capability of determining the steady state temperatures of environmental zones (rooms). A program overview will be provided along with examples of formula use. Required input and output from the program will also be discussed. Specific application of plant monitored temperatures and utilization of this program will be offered. The presentation will show how the program can project individual room temperature profiles without continual temperature monitoring of equipment. A discussion will also be provided for the application of the program generated data. Evaluations of anticipated or planned plant modifications and the use of the subject program will also be covered

Sexual Health Education in Massage Therapy Programs: A Survey of Program Directors

Science.gov (United States)

Zamboni, Brian D.; Healey, Dale K.

2016-01-01

Massage therapy program directors completed an online survey to explore sexual education in massage therapy programs. The overall data suggest that program directors are supportive of sexual health education in the training of massage therapists and that such education is integrated into several aspects of their training programs. To enhance…

Vehicle Technologies Program Overview

Energy Technology Data Exchange (ETDEWEB)

none,

2006-09-05

Overview of the Vehicle Technologies Program including external assessment and market view; internal assessment, program history and progress; program justification and federal role; program vision, mission, approach, strategic goals, outputs, and outcomes; and performance goals.

Foreign criteria and programs

International Nuclear Information System (INIS)

Swinth, K.L.; Thompson, I.M.G.

1993-03-01

The concept of measurement quality assurance (MQA) as embodied in National Institute of Standards and Technology (NIST) programs is not generally used within European programs for testing or accreditation. Although the essential elements of quality control and quality assurance are in the European programs, the concept of testing the capability of the laboratory itself, in terms of its performance for the designated measurements, may not be included. Rather, the European programs use the concept of periodic calibration of laboratory reference standards against the next highest level of standards. Thus, they embody the concept of measurement traceability to appropriate primary standards. Within Europe a series of calibration accreditation programs has been established in the various countries tied together through a multilateral agreement. The radiation measurement programs are based on the International Organization for Standardization (ISO) 9000 series of standards. The purpose of this paper is to outline the overall operation of European Accreditation Programs in the radiation calibration and measurement areas. The operation of the radiation measurement programs of the National Measurement Accreditation Service (NAMAS) in the United Kingdom is described in detail along with other European programs. The manner in which these programs relate to individual dosimetry service programs is also described

Developmental Programming of Renal Function and Re-Programming Approaches.

Science.gov (United States)

Nüsken, Eva; Dötsch, Jörg; Weber, Lutz T; Nüsken, Kai-Dietrich

2018-01-01

Chronic kidney disease affects more than 10% of the population. Programming studies have examined the interrelationship between environmental factors in early life and differences in morbidity and mortality between individuals. A number of important principles has been identified, namely permanent structural modifications of organs and cells, long-lasting adjustments of endocrine regulatory circuits, as well as altered gene transcription. Risk factors include intrauterine deficiencies by disturbed placental function or maternal malnutrition, prematurity, intrauterine and postnatal stress, intrauterine and postnatal overnutrition, as well as dietary dysbalances in postnatal life. This mini-review discusses critical developmental periods and long-term sequelae of renal programming in humans and presents studies examining the underlying mechanisms as well as interventional approaches to "re-program" renal susceptibility toward disease. Clinical manifestations of programmed kidney disease include arterial hypertension, proteinuria, aggravation of inflammatory glomerular disease, and loss of kidney function. Nephron number, regulation of the renin-angiotensin-aldosterone system, renal sodium transport, vasomotor and endothelial function, myogenic response, and tubuloglomerular feedback have been identified as being vulnerable to environmental factors. Oxidative stress levels, metabolic pathways, including insulin, leptin, steroids, and arachidonic acid, DNA methylation, and histone configuration may be significantly altered by adverse environmental conditions. Studies on re-programming interventions focused on dietary or anti-oxidative approaches so far. Further studies that broaden our understanding of renal programming mechanisms are needed to ultimately develop preventive strategies. Targeted re-programming interventions in animal models focusing on known mechanisms will contribute to new concepts which finally will have to be translated to human application. Early

Evaluasi Program-program Pengentasan Kemiskinan di Provinsi Bali

Directory of Open Access Journals (Sweden)

AAIN Marhaeni

2014-07-01

Full Text Available The success of the development carried out by a country, including Indonesia, one of which can be seen from the number of poor people. The results of the development carried out by both the local government and the central government still leaving the poverty in most of the existing population. The number of poor people in the Province of Bali, both in absolute and in the percentage is fluctuating, even  absolutely, the number of  poor people in 2011 was much more than in 2009 (183.1 thousand versus 173.6 thousand of people. It is essential to evaluate the government programs to be in accordance with the Act Number 25 Year 2004 on National Development Planning System which mandates the control and evaluation of the implementation of development plans and to be in accordance with the Government Regulation. 39 of 2006, concerning the monitoring. Seeing the importance of activities to perform the evaluation or monitoring, the study aims: 1 to determine the effectiveness of poverty eradication programs that have been implemented by the government so far, which is reducing the expenditure of the poor people, which involving inputs, processes and outputs;2 To analyze the constraints faced by the implementers in the implementation of poverty eradication programs that are reducing the expenditure of the poor; 3 To assess the benefits perceived by the recipients of the program, during receiving aids in the areas of education, health, and food sector; 4 to analyze the weaknesses that exist in the various poverty eradication programs that have been implemented by the government; 5 to assess the commitment of the program implementers in implementing poverty eradication programs in accordance with the community expectations. The research was conducted in three regencies, namely Buleleng, Badung, and Klungkung and each consisted of as many as 90 persons including the recipients of poverty eradication programs in the fields of education, health, and, food

Morning Programs Revisited.

Science.gov (United States)

Black, Susan

1993-01-01

Like British morning programs of recent decades, upstate New York program encourages parents and community residents to get involved in children's education. Parents and community residents--watercolor artists, auto mechanics, doll collectors, and others--are welcomed and valued in schools. Program's purpose is learning, not entertainment. Topics…

Modern programming language

Science.gov (United States)

Feldman, G. H.; Johnson, J. A.

1980-01-01

Structural-programming language is especially-tailored for producing assembly language programs for MODCOMP II and IV mini-computes. Modern programming language consists of set of simple and powerful control structures that include sequencing alternative selection, looping, sub-module linking, comment insertion, statement continuation, and compilation termination capabilities.

Measurement control program

International Nuclear Information System (INIS)

Anon.

1981-01-01

A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data. The purpose of the session is to enable participants to: (1) understand the criteria for this type of a measurement control program; (2) understand the kinds of physical standards required for the various measurement processes, e.g., weighing, analytical, NDA; (3) understand the need for and importance of a measurement control program; (4) understand the need for special experiments to provide an improved basis for the measurement of difficult-to-measure materials; (5) understand the general scope of the program's statistical aspects; and (6) understand the basis and scope of the documentation procedures

Gender and Programming.

Science.gov (United States)

Crittenden, Courtney A; Koons-Witt, Barbara A

2017-05-01

The current study examines U.S. prison programming availability and participation by gender on a national level. The authors build upon previous literature by using national-level data, something that has been done in very limited cases previously. The main concern of this study is gender and its effects on programming availability and participation. The U.S. corrections field has undergone major changes in regard to population trends, fiscal constraints, policies, and research over the last few decades without a large-scale examination of the effects of these changes on programming across the United States. In this study, multiple types of programming areas were examined and results indicated that often female prisons (i.e., prisons housing only females) were more likely to offer programs (e.g., mental health options) and women were more likely to participate in many programming options compared with male prisons and men, respectively. We discuss the possible reasons for this and implications for future research.

Evaluation Program initiative

International Nuclear Information System (INIS)

Rich, B.L.

1987-01-01

The purpose of this paper is to provide the Department of Energy's (DOE) safeguards and security community with some insights on an important management initiative by the Office of Security Evaluations (OSE). The paper will present the ''what, where, who, when, and why'' of a new Evaluation Program. The Evaluation Program will be comprised of a continuing series of regular and special evaluations of DOE safeguards and security programs and policies. The evaluations will be integrative and ''crosscutting,'' i.e. will extend across DOE organizational lines. Evaluations will be offered as positive advisories to DOE managers with safeguards and security responsibilities and will not be rated. They will complement the ongoing OSE Inspection Program of inspections conducted by OSE's Inspection Division. The purpose for the evaluations is to establish an accurate and current assessment of the effectiveness and status of safeguards and security programs and policies and to provide DOE managers with required information on program and policy effectiveness

Low-level waste management program: technical program overview

International Nuclear Information System (INIS)

Lowrie, R.S.

1981-01-01

The mission of the technical program is to develop the technology component of the Department of Energy's Low-Level Waste Management Program and to manage research and development, demonstration, and documentation of the technical aspects of the program. Some of the major technology objectives are: develop and demonstrate techniques for waste generation reduction; develop and demonstrate waste treatment, handling and packaging techniques; develop and demonstrate the technology for greater confinement; and develop the technology for remedial action at existing sites. In addition there is the technology transfer objective which is to compile and issue a handbook documenting the technology for each of the above technology objectives

Object-oriented Programming Laws for Annotated Java Programs

Directory of Open Access Journals (Sweden)

Gabriel Falconieri Freitas

2010-03-01

Full Text Available Object-oriented programming laws have been proposed in the context of languages that are not combined with a behavioral interface specification language (BISL. The strong dependence between source-code and interface specifications may cause a number of difficulties when transforming programs. In this paper we introduce a set of programming laws for object-oriented languages like Java combined with the Java Modeling Language (JML. The set of laws deals with object-oriented features taking into account their specifications. Some laws deal only with features of the specification language. These laws constitute a set of small transformations for the development of more elaborate ones like refactorings.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Trauma Trauma Programs Trauma Programs About Trauma Programs Violence Prevention BleedingControl.org Trauma Quality Programs National Trauma ... Benefits Current Openings Newsroom Newsroom Newsroom Press Releases Media Resources The FIRST Trial ACS Publications ACS in ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... and Safety Conference Participant Use Data File Surgical Risk Calculator Frequently Asked Questions Participant Hub Contact Us ... Trauma Programs Trauma Programs About Trauma Programs Violence Prevention BleedingControl.org Trauma Quality Programs National Trauma Data ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Trauma Programs Trauma Programs About Trauma Programs Violence Prevention BleedingControl.org Trauma Quality Programs National Trauma Data ... Conference Publications and Posters National Trauma System Injury Prevention and Control Quality and Safety Conference Quality and ...

Program management system manual

International Nuclear Information System (INIS)

1989-08-01

OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

Science.gov (United States)

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

Self-patching firmware program

International Nuclear Information System (INIS)

Stanchi, L.

1976-12-01

A method of branching to an auxiliary program without any hardware or software modification at the time the auxiliary program will be written is described. Suitable statements in the main program are already prepared to accept a future program that will be written in machine language. The main program is stored as firmware in PROM memory, while the auxiliary program is loaded into RAM memory. The method is described for the Intel 8080 microprocessor, but can be generalized for any microprocessor or minicomputer that uses ROMs or PROMs. 1 figure, 2 tables

Revealing the programming process

DEFF Research Database (Denmark)

Bennedsen, Jens; Caspersen, Michael Edelgaard

2005-01-01

One of the most important goals of an introductory programming course is that the students learn a systematic approach to the development of computer programs. Revealing the programming process is an important part of this; however, textbooks do not address the issue -- probably because...... the textbook medium is static and therefore ill-suited to expose the process of programming. We have found that process recordings in the form of captured narrated programming sessions are a simple, cheap, and efficient way of providing the revelation.We identify seven different elements of the programming...

Human Reliability Program Overview

Energy Technology Data Exchange (ETDEWEB)

Bodin, Michael

2012-09-25

This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Membership Directory 2017 Annual Meeting 2016 Annual Meeting Women's Committee Mentorship Program Outside Activities ACS Archives Contact Us Quality Programs Quality Programs Overview About Quality Programs ACS Leadership in Quality ACS Leadership in Quality Setting the ...

Programming Language Pragmatics

CERN Document Server

Scott, Michael L

2009-01-01

Programming Language Pragmatics is the most comprehensive programming language textbook available today. Taking the perspective that language design and language implementation are tightly interconnected, and that neither can be fully understood in isolation, this critically acclaimed and bestselling book has been thoroughly updated to cover the most recent developments in programming language design. With a new chapter on run-time program management and expanded coverage of concurrency, this new edition provides both students and professionals alike with a solid understanding of the most impo

Electron trajectory program

International Nuclear Information System (INIS)

Herrmannsfeldt, W.B.

1979-11-01

The SLAC Electron Trajectory Program is described and instructions and examples for users are given. The program is specifically written to compute trajectories of charged particles in electrostatic and magnetostatic focusing systems including the effects of space charge and self-magnetic fields. Starting options include Child's Law conditions on cathodes of various shapes. Either rectangular or cylindrically symmetric geometry may be used. Magntic fields may be specified using arbitrary configurations of coils, or the output of a magnet program such as Poisson or by an externally calculated array of the axial fields. The program is available in IBM FORTRAN but can be easily converted for use on other brands of hardware. The program is intended to be used with a plotter whose interface the user must provide

Program summary. Nuclear waste management and fuel cycle programs

International Nuclear Information System (INIS)

1982-07-01

This Program Summary Document describes the US Department of Energy (DOE) Nuclear Waste Management and Fuel Cycle Programs. Particular emphasis is given to near-term, specifically Fiscal Year (FY) 1982, activities. The overall objective of these programs will be achieved by the demonstration of: (1) safe radioactive waste management practices for storage and disposal of high-level waste and (2) advanced technologies necessary to close the nuclear fuel cycle on a schedule which would assure a healthy future for the development of nuclear power in this country

FY-2007 PNNL Voluntary Protection Program (VPP) Program Evaluation

International Nuclear Information System (INIS)

Wright, Patrick A.; Fisher, Julie A.; Goheen, Steven C.; Isern, Nancy G.; Madson, Vernon J.; Meicenheimer, Russell L.; Pugh, Ray; Schneirla, Keri A.; Shockey, Loretta L.; Tinker, Mike R.

2008-01-01

This document reports the results of the FY-2007 PNNL VPP Program Evaluation, which is a self-assessment of the operational and programmatic performance of the Laboratory related to worker safety and health. The report was compiled by a team of worker representatives and safety professionals who evaluated the Laboratory's worker safety and health programs on the basis of DOE-VPP criteria. The principle elements of DOE's VPP program are: Management Leadership, Employee Involvement, Worksite Analysis, Hazard Prevention and Control, and Safety and Health Training.

Programming Scala Scalability = Functional Programming + Objects

CERN Document Server

Wampler, Dean

2009-01-01

Learn how to be more productive with Scala, a new multi-paradigm language for the Java Virtual Machine (JVM) that integrates features of both object-oriented and functional programming. With this book, you'll discover why Scala is ideal for highly scalable, component-based applications that support concurrency and distribution. Programming Scala clearly explains the advantages of Scala as a JVM language. You'll learn how to leverage the wealth of Java class libraries to meet the practical needs of enterprise and Internet projects more easily. Packed with code examples, this book provides us

The Development of a Program Engagement Theory for Group Offending Behavior Programs.

Science.gov (United States)

Holdsworth, Emma; Bowen, Erica; Brown, Sarah; Howat, Douglas

2017-10-01

Offender engagement in group offending behavior programs is poorly understood and under-theorized. In addition, there is no research on facilitators' engagement. This article presents the first ever theory to address this gap. A Program Engagement Theory (PET) was derived from a constructivist grounded theory analysis that accounts for both facilitators' and offenders' engagement in group offending behavior programs (GOBPs). Interviews and session observations were used to collect data from 23 program facilitators and 28 offenders (group members). The analysis revealed that group members' engagement involved shared identities and moving on as a group. In turn, this was dependent on facilitators personalising treatment frameworks and establishing a hook to help group members move on. The PET emphasizes the importance of considering change during treatment as a process rather than simply a program outcome. Solution-focused (SF) programs were more conducive to engagement and the change process than offence-focused programs.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Advocacy Efforts Cancer Liaison Program Cancer Programs Conference Clinical Research Program Commission on Cancer National Accreditation Program for ... and Safety Conference ACS Clinical Scholars in Residence Clinical Trials ... Health Services Research Methods Course Surgeon Specific Registry Trauma Education Trauma ...

Head First Programming A learner's guide to programming using the Python language

CERN Document Server

Griffiths, David

2009-01-01

Looking for a reliable way to learn how to program on your own, without being overwhelmed by confusing concepts? Head First Programming introduces the core concepts of writing computer programs -- variables, decisions, loops, functions, and objects -- which apply regardless of the programming language. This book offers concrete examples and exercises in the dynamic and versatile Python language to demonstrate and reinforce these concepts. Learn the basic tools to start writing the programs that interest you, and get a better understanding of what software can (and cannot) do. When you're fi

Construction program management

CERN Document Server

Delaney, Joseph

2013-01-01

Although construction is one of the largest industries in the United States, it lags behind other industries in its implementation of modern management techniques such as those contained in the Standard for Program Management (the Standard) by the Project Management Institute (PMI(R)). Construction Program Management details the successful use of the PMI(R) approach for the construction of capital programs. It demonstrates, through case studies, how implementation of PMI's set of tools and techniques can improve the chances of program success. Exploring tactical and strategic management method

Programming language structures

CERN Document Server

Organick, Elliott Irving; Plummer, Robert P

1978-01-01

Programming Language Structures deals with the structures of programming languages and introduces the reader to five important programming languages: Algol, Fortran, Lisp, Snobol, and Pascal. The fundamental similarities and differences among these languages are discussed. A unifying framework is constructed that can be used to study the structure of other languages, such as Cobol, PL/I, and APL. Several of the tools and methodologies needed to construct large programs are also considered.Comprised of 10 chapters, this book begins with a summary of the relevant concepts and principles about al

Customer Service Programming

Science.gov (United States)

1982-01-01

Use of computer program STRCMACS has enabled Illinois Bell Telephone, a subsidiary of American Telephone and Telegraph to cut software development costs about 10 percent by reducing program maintenance and by allowing the department to bring other software into operation more quickly. It has also been useful in company training of programming staff.

Special Milk Program

Science.gov (United States)

US Department of Agriculture, 2009

2009-01-01

The Special Milk Program provides milk to children in schools, child care institutions and eligible camps that do not participate in other Federal child nutrition meal service programs. The program reimburses schools and institutions for the milk they serve. In 2008, 4,676 schools and residential child care institutions participated, along with…

Programming

OpenAIRE

Jackson, M A

1982-01-01

The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, thi...

A Simple Application Program Interface for Saving Java Program Data on a Wiki

OpenAIRE

Yamanoue, Takashi; Oda, Kentaro; Shimozono, Koichi

2012-01-01

A simple application program interface (API) for Java programs running on a wiki is implemented experimentally. A Java program with the API can be running on a wiki, and the Java program can save its data on the wiki. The Java program consists of PukiWiki, which is a popular wiki in Japan, and a plug-in, which starts up Java programs and classes of Java. A Java applet with default access privilege cannot save its data at a local host. We have constructed an API of applets for easy and unified...

The standard for program management

CERN Document Server

2017-01-01

The Standard for Program Management – Fourth Edition differs from prior editions by focusing on the principles of good program management. Program activities have been realigned to program lifecycle phases rather than topics, and the first section was expanded to address the key roles of program manager, program sponsor and program management office. It has also been updated to better align with PMI’s Governance of Portfolios, Programs, and Projects: A Practice Guide.

FY-2007 PNNL Voluntary Protection Program (VPP) Program Evaluation

Energy Technology Data Exchange (ETDEWEB)

Wright, Patrick A.; Fisher, Julie A.; Goheen, Steven C.; Isern, Nancy G.; Madson, Vernon J.; Meicenheimer, Russell L.; Pugh, Ray; Schneirla, Keri A.; Shockey, Loretta L.; Tinker, Mike R.

2008-08-15

This document reports the results of the FY-2007 PNNL VPP Program Evaluation, which is a self-assessment of the operational and programmatic performance of the Laboratory related to worker safety and health. The report was compiled by a team of worker representatives and safety professionals who evaluated the Laboratory's worker safety and health programs on the basis of DOE-VPP criteria. The principle elements of DOE's VPP program are: Management Leadership, Employee Involvement, Worksite Analysis, Hazard Prevention and Control, and Safety and Health Training.

Commercial Midstream Energy Efficiency Incentive Programs: Guidelines for Future Program Design, Implementation, and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Milostan, Catharina [Argonne National Lab. (ANL), Argonne, IL (United States); Levin, Todd [Argonne National Lab. (ANL), Argonne, IL (United States); Muehleisen, Ralph T. [Argonne National Lab. (ANL), Argonne, IL (United States); Guzowski, Leah Bellah B. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-01-01

Many electric utilities operate energy efficiency incentive programs that encourage increased dissemination and use of energy-efficient (EE) products in their service territories. The programs can be segmented into three broad categories—downstream incentive programs target product end users, midstream programs target product distributors, and upstream programs target product manufacturers. Traditional downstream programs have had difficulty engaging Small Business/Small Portfolio (SBSP) audiences, and an opportunity exists to expand Commercial Midstream Incentive Programs (CMIPs) to reach this market segment instead.

Relationship between internal medicine program board examination pass rates, accreditation standards, and program size.

Science.gov (United States)

Falcone, John L; Gonzalo, Jed D

2014-01-19

To determine Internal Medicine residency program compliance with the Accreditation Council for Graduate Medical Education 80% pass-rate standard and the correlation between residency program size and performance on the American Board of Internal Medicine Certifying Examination. Using a cross-sectional study design from 2010-2012 American Board of Internal Medicine Certifying Examination data of all Internal Medicine residency pro-grams, comparisons were made between program pass rates to the Accreditation Council for Graduate Medical Education pass-rate standard. To assess the correlation between program size and performance, a Spearman's rho was calculated. To evaluate program size and its relationship to the pass-rate standard, receiver operative characteristic curves were calculated. Of 372 Internal Medicine residency programs, 276 programs (74%) achieved a pass rate of =80%, surpassing the Accreditation Council for Graduate Medical Education minimum standard. A weak correlation was found between residency program size and pass rate for the three-year period (p=0.19, pInternal Medicine residency programs complied with Accreditation Council for Graduate Medical Education pass-rate standards, a quarter of the programs failed to meet this requirement. Program size is positively but weakly associated with American Board of Internal Medicine Certifying Examination performance, suggesting other unidentified variables significantly contribute to program performance.

Hemovigilance Program-India

Directory of Open Access Journals (Sweden)

Akanksha Bisht

2013-01-01

Full Text Available A centralized hemovigilance program to assure patient safety and to promote public health has been launched for the first time in India on Dec 10, 2012 in 60 medical colleges in the first phase along with a well-structured program for monitoring adverse reactions associated with blood transfusion and blood product administration. National Institute of Biologicals (NIB will be the National Coordinating Centre for Hemovigilance. This program will be implemented under overall ambit of Pharmacovigilance Program of India (PvPI, which is being coordinated by Indian Pharmacopoeia Commission (IPC. All medical colleges of the country will be enrolled in this program by the year 2016 in order to have a National Centre of Excellence for Hemovigilance at NIB, which will act as a global knowledge platform.

Electron trajectory program

Energy Technology Data Exchange (ETDEWEB)

Herrmannsfeldt, W.B.

1979-11-01

The SLAC Electron Trajectory Program is described and instructions and examples for users are given. The program is specifically written to compute trajectories of charged particles in electrostatic and magnetostatic focusing systems including the effects of space charge and self-magnetic fields. Starting options include Child's Law conditions on cathodes of various shapes. Either rectangular or cylindrically symmetric geometry may be used. Magntic fields may be specified using arbitrary configurations of coils, or the output of a magnet program such as Poisson or by an externally calculated array of the axial fields. The program is available in IBM FORTRAN but can be easily converted for use on other brands of hardware. The program is intended to be used with a plotter whose interface the user must provide.

Rural Electrification Program in Indonesia: Comparing SEHEN and SHS Program

Directory of Open Access Journals (Sweden)

Maxensius Tri Sambodo

2015-07-01

Full Text Available In 2014, the Indonesian government has targets to obtain 80% of electrification ratio and 98.9% of rural electrification ratio. Extending the grid and off-grid connection has been done to obtain the targets. This paper aims to compare two main programs on rural electrification namely Super Extra Energy Saving (Super Ekstra Hemat Energi, SEHEN that is belong to PLN (state owned company in electricity and the Solar Home System (SHS that is financed by the Ministry of Energy and Mineral Resources (MEMR. Indonesia has started the rural electrification program in the late 1950s, but how to provide electricity in a sustainable ways both organizationally and institutionally still become a big challenge. The experiences from East Nusa Tenggara provinces showed that both SEHEN and SHS can instantly improve electrification ratio, but government needs to synchronize the technical, administrative, and financial aspect from the two programs. Without any improvements in designing the program, we argue that the existing program is not sustainable.

HEALS Hypertension Control Program: Training Church Members as Program Leaders.

Science.gov (United States)

Dodani, Sunita; Beayler, Irmatine; Lewis, Jennifer; Sowders, Lindsey A

2014-01-01

Health disparities related to cardiovascular diseases (CVDs) including stroke have remained higher in the African-Americans (AAs) than in other populations. HEALS is a faith-based hypertension (HTN) control program modified according to AA community needs, and delivered by the church-lay members called church health advisors (CHAs). This study examined the feasibility and acceptability of training CHAs as HEALS program leaders. Four CHAs completed a 10-hour HEALS program training workshop at the Church, conducted by the nutrition experts. Workshop was evaluated by CHAs on their level of satisfaction, clarity of contents covered and comfort in delivery the program to the church congregation. The overall six main HEALS curriculum components were completed. Workshop was highly evaluated by CHAs on length of training, balance between content and skills development, and level of satisfaction with program delivery. Church-based culturally modified health promotion interventions conducted by the community lay members may be a way to reduce health disparities in ethnic minorities.

YRE Program Guide.

Science.gov (United States)

California State Dept. of Education, Sacramento. Div. of School Facilities Planning.

This report examines single- and multi-track educational programs as found in California's public school system, explores the pros and cons of using year-round education (YRE) programs, and how to implement these programs. Each year-round tracking system is detailed using each of their calendars in a side-by-side comparison along with the…

Python to learn programming

Science.gov (United States)

Bogdanchikov, A.; Zhaparov, M.; Suliyev, R.

2013-04-01

Today we have a lot of programming languages that can realize our needs, but the most important question is how to teach programming to beginner students. In this paper we suggest using Python for this purpose, because it is a programming language that has neatly organized syntax and powerful tools to solve any task. Moreover it is very close to simple math thinking. Python is chosen as a primary programming language for freshmen in most of leading universities. Writing code in python is easy. In this paper we give some examples of program codes written in Java, C++ and Python language, and we make a comparison between them. Firstly, this paper proposes advantages of Python language in relation to C++ and JAVA. Then it shows the results of a comparison of short program codes written in three different languages, followed by a discussion on how students understand programming. Finally experimental results of students' success in programming courses are shown.

The evolution of programs

CERN Document Server

Dershowitz, Nachum

1983-01-01

-Ecclesiastes 12:12 Programs are invariably subjected to many rorms or transrormation. After an initial version of a program has been designed and developed, it undergoes debugging and certification. In addition, most long-lived pro­ grams have a liCe-cycle that includes modifications to meet amended specifications and extensions for expanded capabilities. Such evolution­ ary aspects of programming are the topic of this monograph. We present rormal methods for manipulating programs and illustrate their applica­ tion with numerous examples. Such methods could be incorporated in semi-automated programming environments, where they would serve to ease the burden on the programmer. We begin by describing a method whereby a given program that achieves one goal can be modified to achieve a different goal or a pro­ gram that computes wrong results can be debugged to achieve the 2 Preface intended results. The abstraction of a set of cognate programs to obtain a program schema, and the instantiation of abstract sc...

Magnetic Fusion Science Fellowship program: Summary of program activities for calendar year 1986

International Nuclear Information System (INIS)

1986-01-01

This report describes the 1985-1986 progress of the Magnetic Fusion Science Fellowship program (MFSF). The program was established in January of 1985 by the Office of Fusion Energy (OFE) of the US Department of Energy (DOE) to encourage talented undergraduate and first-year graduate students to enter qualified graduate programs in the sciences related to fusion energy development. The program currently has twelve fellows in participating programs. Six new fellows are being appointed during each of the program's next two award cycles. Appointments are for one year and are renewable for two additional years with a three year maximum. The stipend level also continues at a $1000 a month or $12,000 a year. The program pays all tuition and fee expenses for the fellows. Another important aspect of the fellowship program is the practicum. During the practicum fellows receive three month appointments to work at DOE designated fusion science research and development centers. The practicum allows the MFSF fellows to directly participate in on-going DOE research and development programs

Programming Python

CERN Document Server

Lutz, Mark

2011-01-01

If you've mastered Python's fundamentals, you're ready to start using it to get real work done. Programming Python will show you how, with in-depth tutorials on the language's primary application domains: system administration, GUIs, and the Web. You'll also explore how Python is used in databases, networking, front-end scripting layers, text processing, and more. This book focuses on commonly used tools and libraries to give you a comprehensive understanding of Python's many roles in practical, real-world programming. You'll learn language syntax and programming techniques in a clear and co

Maintenance procedure upgrade programs

International Nuclear Information System (INIS)

Campbell, J.J.; Zimmerman, C.M.

1988-01-01

This paper describes a systematic approach to upgrading nuclear power plant maintenance procedures. The approach consists of four phases: diagnosis, program planning, program implementation, and program evaluation. Each phase is explained as a series of steps to ensure that all factors in a procedure upgrade program are considered

BeHealthy Charities Aid Foundation Program, Russia: a Program Impact Pathways (PIP) analysis.

Science.gov (United States)

Mukhina, Marina; Novikova, Irina

2014-09-01

In 2007, the Charities Aid Foundation Branch in Russia, under the initiative of and with financial support from the Mondelēz International Foundation and Mondelēz International, launched the charitable BeHealthy Program. The program's main focus is the implementation of four interrelated activities: conducting lessons for schoolchildren on healthy nutrition, with an emphasis on breakfast; healthy cooking lessons with children; cultivating nutritional plants; and providing conditions to encourage children to engage in more physical activity. The program serves more than 13,000 children attending public schools in the Leningrad (Lomonosovskii District), Vladimir, and Novgorod regions. BeHealthy provides funding for schools and comprehensive educational materials to help schoolchildren develop habits of healthy nutrition and physical activity, as well as consulting and expert support for school staff and other key stakeholders. The program brings in experts on program implementation and training for teachers. Curriculum support also includes printed and Web-based healthy lifestyle educational materials on best practices and positive experience, as well as meetings and conferences with school representatives and local authorities. One of the biggest challenges for program managers is to fully understand the complexities of the program, and why and how it is expected to induce changes in healthy lifestyle behaviors of the schoolchildren. For more comprehensive understanding, we performed a Program Impact Pathways (PIP) analysis to identify Critical Quality Control Points (CCPs) and a suite of core indicators of the program's impact on healthy lifestyles. The findings were presented at the Healthy Life-styles Program Evaluation Workshop held in Granada, Spain, 13-14 September 2013, under the auspices of the Mondelēz International Foundation. First, we developed an updated logic model based on how the program was executed. We then translated the logic model into a PIP

Multiobjective programming and planning

CERN Document Server

Cohon, Jared L

2004-01-01

This text takes a broad view of multiobjective programming, emphasizing the methods most useful for continuous problems. It reviews multiobjective programming methods in the context of public decision-making problems, developing each problem within a context that addresses practical aspects of planning issues. Topics include a review of linear programming, the formulation of the general multiobjective programming problem, classification of multiobjective programming methods, techniques for generating noninferior solutions, multiple-decision-making methods, multiobjective analysis of water reso

Introduction to parallel programming

CERN Document Server

Brawer, Steven

1989-01-01

Introduction to Parallel Programming focuses on the techniques, processes, methodologies, and approaches involved in parallel programming. The book first offers information on Fortran, hardware and operating system models, and processes, shared memory, and simple parallel programs. Discussions focus on processes and processors, joining processes, shared memory, time-sharing with multiple processors, hardware, loops, passing arguments in function/subroutine calls, program structure, and arithmetic expressions. The text then elaborates on basic parallel programming techniques, barriers and race

Technology Commercialization Program 1991

Energy Technology Data Exchange (ETDEWEB)

1991-11-01

This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

Directory of Open Access Journals (Sweden)

Bryanna Hahn Fox

2012-12-01

Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

3-D diffusion program XYZ-MUGDI with data-analyzing program XYZFF

Energy Technology Data Exchange (ETDEWEB)

Siewers, H

1976-01-01

The XYZ-MUGDI program solves boudary value and eigenvalue problems for three-dimensional heterogeneous configurations in X, Y, Z-geometry for a maximum of four energy groups. The program XYZFF is a program for analyzing data; with it especially the average and maximum form factors for arbitrary coarse-meshed networks can be evaluated.

A Review of Generic Program Visualization Systems for Introductory Programming Education

Science.gov (United States)

Sorva, Juha; Karavirta, Ville; Malmi, Lauri

2013-01-01

This article is a survey of program visualization systems intended for teaching beginners about the runtime behavior of computer programs. Our focus is on generic systems that are capable of illustrating many kinds of programs and behaviors. We inclusively describe such systems from the last three decades and review findings from their empirical…

Knowledge management program

International Nuclear Information System (INIS)

Henderson, T.

2013-01-01

To capture and retain the CANDU experience from a wider CANDU base and transfer knowledge and experience to our members, supplier participants and universities in a cost effective manner. Major focus area of the program is knowledge management joint projects, generic training delivery, inter-utilities mentoring and technical support, public education programs. The path forward is execution of transition of OPG NPDS Program as an ongoing program in COG with member funding, pursue opportunities to provide member utilities with additional leadership and train-the-trainer training and grow the knowledge management activities by 20% per year based on 2013/2014 results.

Practical C programming

CERN Document Server

Oualline, Steve

1997-01-01

There are lots of introductory C books, but this is the first one that has the no-nonsense, practical approach that has made Nutshell Handbooks® famous. C programming is more than just getting the syntax right. Style and debugging also play a tremendous part in creating programs that run well and are easy to maintain. This book teaches you not only the mechanics of programming, but also describes how to create programs that are easy to read, debug, and update. Practical rules are stressed. For example, there are fifteen precedence rules in C (&& comes before || comes before ?:). The practi

Knowledge management program

Energy Technology Data Exchange (ETDEWEB)

Henderson, T. [CANDU Owners' Group, Toronto, Ontario (Canada)

2013-07-01

To capture and retain the CANDU experience from a wider CANDU base and transfer knowledge and experience to our members, supplier participants and universities in a cost effective manner. Major focus area of the program is knowledge management joint projects, generic training delivery, inter-utilities mentoring and technical support, public education programs. The path forward is execution of transition of OPG NPDS Program as an ongoing program in COG with member funding, pursue opportunities to provide member utilities with additional leadership and train-the-trainer training and grow the knowledge management activities by 20% per year based on 2013/2014 results.

Canadian fusion program

International Nuclear Information System (INIS)

Brown, T.S.

1982-06-01

The National Research Council of Canada is establishing a coordinated national program of fusion research and development that is planned to grow to a total annual operating level of about $20 million in 1985. The long-term objective of the program is to put Canadian industry in a position to manufacture sub-systems and components of fusion power reactors. In the near term the program is designed to establish a minimum base of scientific and technical expertise sufficient to make recognized contributions and thereby gain access to the international effort. The Canadian program must be narrowly focussed on a few specializations where Canada has special indigenous skills or technologies. The programs being funded are the Tokamak de Varennes, the Fusion Fuels Technology Project centered on tritium management, and high-power gas laser technology and associated diagnostic instrumentation

Refrigerator retirement and replacement programs : lessons learned and application to an Ontario wide program

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-05-15

The best practices in refrigerator retirement programs in North America were identified in an effort to develop a concept for an Ontario-wide provincial refrigerator retirement program. The report focused on describing refrigerator retirement programs, namely those programs that focused on getting rid of old secondary refrigerators. The report excluded refrigerator replacement programs, which encourage householders to retire their refrigerators early and replace them with an energy star refrigerator. However, it was noted that in several regions, both replacement and retirement programs are offered at the same time. The report provided background information on energy use by refrigerators as well as refrigerator retirement and replacement programs. Types of refrigerator retirement and replacement programs and the environmental benefits of these programs were also described. The report also addressed the potential energy impact of an Ontario-wide refrigerator retirement program as well as consumer incentive and bounties initiatives to encourage households to retire units. Other topics covered in the report included the design of typical refrigerator retirement and replacement programs; collection and recycling of retired refrigerators; reported costs of refrigerator retirement and replacement programs; as well as marketing and advertising. The role of retailers and manufacturers and reported lessons learned from refrigerator retirement and replacement were also presented. 14 refs., 6 tabs., 6 appendices.

Program Director Participation in a Leadership and Management Skills Fellowship and Characteristics of Program Quality.

Science.gov (United States)

Carek, Peter J; Mims, Lisa D; Conry, Colleen M; Maxwell, Lisa; Greenwood, Vicki; Pugno, Perry A

2015-01-01

The association between a residency program director completing a leadership and management skills fellowship and characteristics of quality and innovation of his/her residency program has not been studied. Therefore, the aim of this study is to examine the association between a residency program director's completion of a specific fellowship addressing these skills (National Institute for Program Director Development or NIPDD) and characteristics of quality and innovation of the program they direct. Using information from the American Academy of Family Physicians (AAFP), National Resident Matching Program (NRMP) and FREIDA® program characteristics were obtained. Descriptive statistics were used to summarize the data. The relationship between programs with a NIPDD graduate as director and program quality measures and indicators of innovation was analyzed using both chi square and logistic regression. Initial analyses showed significant associations between the NIPDD graduate status of a program director and regional location, mean years of program director tenure, and the program's 5-year aggregate ABFM board pass rate from 2007--2011. After grouping the programs into tertiles, the regression model showed significant positive associations with programs offering international experiences and being a NIPDD graduate. Program director participation in a fellowship addressing leadership and management skills (ie, NIPDD) was found to be associated with higher pass rates of new graduates on a Board certification examination and predictive of programs being in the upper tertile of programs in terms of Board pass rates.

The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

Energy Technology Data Exchange (ETDEWEB)

Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

2014-03-19

End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new

77 FR 14465 - Public Transportation on Indian Reservations Program; Tribal Transit Program

Science.gov (United States)

2012-03-09

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Public Transportation on Indian... in funding provided by the Public Transportation on Indian Reservations Program (Tribal Transit... establishing the Public Transportation on Indian Reservations Program (Tribal Transit Program or TTP). This...

Croatian non-fossil energy programme (NFE Program); Program nefosilnih energenata u Hrvatskoj (Program NFE)

Energy Technology Data Exchange (ETDEWEB)

Kamenski, M; Potocnik, V [Zagreb (Croatia)

1997-12-31

Proposed NFE Program (rational energy use and renewable energy) takes into account European Union experience and the facts of scarce fossil fuel reserves and relatively low energy efficiency in Croatia. Implementation of the NFE Program is expected to reduce fossil fuels import growth and environmental pollution, to improve import-export trade balance and to contribute to the new local jobs. (author). 4 figs., 11 refs.

BASIC Programming.

Science.gov (United States)

Jennings, Carol Ann

Designed for use by both secondary- and postsecondary-level business teachers, this curriculum guide consists of 10 units of instructional materials dealing with Beginners All-Purpose Symbol Instruction Code (BASIC) programing. Topics of the individual lessons are numbering BASIC programs and using the PRINT, END, and REM statements; system…

Nutrition Program Quality Assurance through a Formalized Process of On-Site Program Review

Science.gov (United States)

Paddock, Joan Doyle; Dollahite, Jamie

2012-01-01

A protocol for a systematic onsite review of the Expanded Food and Nutrition Education Program and Supplemental Nutrition Assistance Program-Education was developed to support quality programming and ensure compliance with state guidelines and federal regulations. Onsite review of local nutrition program operations is one strategy to meet this…

Which Introductory Programming Approach Is Most Suitable for Students: Procedural or Visual Programming?

Science.gov (United States)

Eid, Chaker; Millham, Richard

2012-01-01

In this paper, we discuss the visual programming approach to teaching introductory programming courses and then compare this approach with that of procedural programming. The involved cognitive levels of students, as beginning students are introduced to different types of programming concepts, are correlated to the learning processes of…

The Value in Evaluating and Communicating Program Impact: The Ohio BR&E Program

Science.gov (United States)

Daivs, Gregory

2012-01-01

Assessing program impact can provide useful program evaluation data. It also provides a basis for program development, marketing, and justification. This article discusses recent impact evaluation efforts and findings of a long-time Extension program; referred to as Business Retention and Expansion (BR&E). How such information can be…

The Trailblazer Program

Science.gov (United States)

Trefney, Charles J.

1999-01-01

This paper presents the "Three Pillars of Success" for the Trailblazer Program. The topics include: 1) The "Rocket Equation" for SSTO (Single Stage To Orbit); 2) The Rocket I* Barrier; 3) Rocket-Based Combined-Cycle Engine; 4) Potential for Reusability; 5) Factors Mitigating RBCC Performance; 6) The "Trailblazer" Program; 7) Trailblazer Performance Goals; 8) Trailblazer Reference Vehicle; and 9) Trailblazer Program Architecture.

Resource programs: Draft Environmental Impact Statement Resource Programs

International Nuclear Information System (INIS)

1992-03-01

Every two years, Bonneville Power Administration (BPA) prepares a Resource Program which identifies the resource actions BPA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Program's Environmental Impact Statement (RPEIS) is a programmatic environmental document which will support decisions made in several future Resource Programs. Environmental documents tiered to the EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. This report contains the appendices to the RPEIS

The Cybernetic Writing Program.

Science.gov (United States)

Lowe, Kelly Fisher

This paper looks at the role of a Writing Program Administrator, and applies the idea of a cybernetic system to the administration of the program. In this cybernetic model, the Writing Program Administrator (WPA) works as both a problem solver and problem causer, with the responsibility of keeping the program in proper balance. A cybernetic…

76 FR 44394 - Public Transportation on Indian Reservations Program; Tribal Transit Program

Science.gov (United States)

2011-07-25

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Public Transportation on Indian... the Public Transportation on Indian Reservations Program (Tribal Transit Program) (TTP). This program... of the Census and may be used for public transportation capital projects, operating costs of...

Impact of Aspect-Oriented Programming on the Quality of Novices’ Programs: A Comparative Study

Directory of Open Access Journals (Sweden)

Marija Katic

2013-06-01

Full Text Available Aspect-oriented programming has been introduced in order to increase the modularity of object-oriented programs and is claimed to improve software quality. Although there are various researches on this claim, the question to what extent aspect-oriented programming improves the quality of programs depending on a developer’s experience still remains. The purpose of this study is to investigate whether aspect-oriented programming used by novice programmers improves the quality of programs, in terms of software flexibility and readability (consequently reusability and maintainability as well. As a part of an undergraduate course in programming paradigms and languages, a systematic comparison between students’ object-oriented and aspect-oriented solutions of the same problem was driven. In order to drive this comparison we have established the basis for the development of the new quality assessment model consisting of software metrics for an objective evaluation and student survey for subjective evaluation. The results show that the use of aspect-oriented programming lead to novices’ programs that are easier to change and read (flexible and readable compared to object-oriented programs. What is more, administered survey showed that students perceive their programs as more flexible and readable.

Recruiting Fathers to Parenting Programs: Advice from Dads and Fatherhood Program Providers

Science.gov (United States)

Stahlschmidt, Mary Jo; Threlfall, Jennifer; Seay, Kristen D.; Lewis, Ericka M.; Kohl, Patricia L.

2014-01-01

The benefits of high-quality father-child relationships for fathers and children alike are well documented. While evidence suggests parenting programs can improve the quality of father-child relationships, few fathers participate in such programs. This qualitative study aims to fill the gap in knowledge on best practices for recruiting urban African American fathers, a group of fathers with unique parenting challenges, to parenting programs. Focus groups were conducted with 29 fathers to gain their perspectives on recruitment strategies. Semi-structured interviews were also conducted with a nationwide sample of 19 fatherhood program providers to learn about their most successful recruitment strategies. Recruitment strategies based on emergent themes from the focus groups and interviews are presented here. Themes included using word-of-mouth recruitment, increasing advertising, targeting advertising specifically to urban African American fathers, providing transportation and incentives, recruiting through the courts, collaborating with other community agencies, and offering parenting programming along with other programming valued by fathers such as employment assistance. Implications for developing strategies for recruiting urban African American fathers to parenting programs are discussed. PMID:24791035

Recruiting Fathers to Parenting Programs: Advice from Dads and Fatherhood Program Providers.

Science.gov (United States)

Stahlschmidt, Mary Jo; Threlfall, Jennifer; Seay, Kristen D; Lewis, Ericka M; Kohl, Patricia L

2013-10-01

The benefits of high-quality father-child relationships for fathers and children alike are well documented. While evidence suggests parenting programs can improve the quality of father-child relationships, few fathers participate in such programs. This qualitative study aims to fill the gap in knowledge on best practices for recruiting urban African American fathers, a group of fathers with unique parenting challenges, to parenting programs. Focus groups were conducted with 29 fathers to gain their perspectives on recruitment strategies. Semi-structured interviews were also conducted with a nationwide sample of 19 fatherhood program providers to learn about their most successful recruitment strategies. Recruitment strategies based on emergent themes from the focus groups and interviews are presented here. Themes included using word-of-mouth recruitment, increasing advertising, targeting advertising specifically to urban African American fathers, providing transportation and incentives, recruiting through the courts, collaborating with other community agencies, and offering parenting programming along with other programming valued by fathers such as employment assistance. Implications for developing strategies for recruiting urban African American fathers to parenting programs are discussed.

Older Workers and Federal Work Programs: The Korean Senior Employment Program (KSEP).

Science.gov (United States)

Choi, Eunhee

2016-01-01

Federal older worker programs are attracting attention due to the growing number of older workers across the world. They are uniquely situated to provide out-of-market work opportunities to older job seekers, who often find their age a barrier to securing desirable jobs. In 2004, the Korean government established its own program, the Korean Senior Employment Program (KSEP); however, literature for international readers on this innovative program is lacking. Thus, this article aims to provide an in-depth description of KSEP and a brief comparison between the Senior Community Service Employment Program in the U.S. and KSEP. The unique characteristics of KSEP include having the dual program foci on supplemental income and social participation; expanding work opportunities in the private sector beyond community-based jobs; accepting participants who are financially disadvantaged as well as those with a high desire for social participation regardless of their income; and broadening work opportunities for those with professional skills beyond repetitive, simple, and temporary jobs. This article may offer helpful insights to older worker advocates from various countries in creating or modifying their programs.

Summary of Program Evaluation Results: 1985-1986 School Year Pre-Kindergarten Educational Program.

Science.gov (United States)

Heath, Robert W.; And Others

Reported are findings of the 1985-86 program evaluation of the prenatal-to-preschool and preschool programs operating under the auspices of the Kamehameha Schools/Bishop Estate. Evaluation of the prenatal-to-preschool program (the Kupulani Program) included item analysis of the Questions about Pregnancy Test, development of a revised data…

Exploring the Educational Benefits of Introducing Aspect-Oriented Programming Into a Programming Course

Science.gov (United States)

Boticki, I.; Katic, M.; Martin,S.

2013-01-01

This paper explores the educational benefits of introducing the aspect-oriented programming paradigm into a programming course in a study on a sample of 75 undergraduate software engineering students. It discusses how using the aspect-oriented paradigm, in addition to the object-oriented programming paradigm, affects students' programs, their exam…

Mammography accreditation program

Energy Technology Data Exchange (ETDEWEB)

Wilcox, P.

1993-12-31

In the mid-1980`s, the movement toward the use of dedicated mammography equipment provided significant improvement in breast cancer detection. However, several studies demonstrated that this change was not sufficient to ensure optimal image quality at a low radiation dose. In particular, the 1985 Nationwide Evaluation of X-ray Trends identified the wide variations in image quality and radiation dose, even from dedicated units. During this time period, the American Cancer Society (ACS) launched its Breast Cancer Awareness Screening Campaign. However, there were concerns about the ability of radiology to respond to the increased demand for optimal screening examinations that would result from the ACS program. To respond to these concerns, the ACS and the American College of Radiology (ACR) established a joint committee on mammography screening in 1986. After much discussion, it was decided to use the ACR Diagnostic Practice Accreditation Program as a model for the development of a mammography accreditation program. However, some constraints were required in order to make the program meet the needs of the ACS. This voluntary, peer review program had to be timely and cost effective. It was determined that the best way to address these needs would be to conduct the program by mail. Finally, by placing emphasis on the educational nature of the program, it would provide an even greater opportunity for improving mammographic quality. The result of this effort was that, almost six years ago, in May 1987, the pilot study for the ACR Mammography Accreditation Program (MAP) began, and in August of that year, the first applications were received. In November 1987, the first 3-year accreditation certificates were awarded.

Mammography accreditation program

International Nuclear Information System (INIS)

Wilcox, P.

1993-01-01

In the mid-1980's, the movement toward the use of dedicated mammography equipment provided significant improvement in breast cancer detection. However, several studies demonstrated that this change was not sufficient to ensure optimal image quality at a low radiation dose. In particular, the 1985 Nationwide Evaluation of X-ray Trends identified the wide variations in image quality and radiation dose, even from dedicated units. During this time period, the American Cancer Society (ACS) launched its Breast Cancer Awareness Screening Campaign. However, there were concerns about the ability of radiology to respond to the increased demand for optimal screening examinations that would result from the ACS program. To respond to these concerns, the ACS and the American College of Radiology (ACR) established a joint committee on mammography screening in 1986. After much discussion, it was decided to use the ACR Diagnostic Practice Accreditation Program as a model for the development of a mammography accreditation program. However, some constraints were required in order to make the program meet the needs of the ACS. This voluntary, peer review program had to be timely and cost effective. It was determined that the best way to address these needs would be to conduct the program by mail. Finally, by placing emphasis on the educational nature of the program, it would provide an even greater opportunity for improving mammographic quality. The result of this effort was that, almost six years ago, in May 1987, the pilot study for the ACR Mammography Accreditation Program (MAP) began, and in August of that year, the first applications were received. In November 1987, the first 3-year accreditation certificates were awarded

Abandoned works program

International Nuclear Information System (INIS)

Arnott, A.

2007-01-01

Thousands of improperly abandoned or decommissioned oil and gas wells are threatening the purity of Ontario's source water. This presentation discussed an abandoned works program developed by the Ontario Ministry of Natural Resources. The abandoned works program was established in 2005 in order to plug old oil and gas wells. The program was designed to create a list of abandoned wells, develop a coherent policy, and formulate procurement and contracting protocols. Abandoned wells are defined as wells drilled prior to 1963 with no operator other than the current landowner. There are currently over 200 prioritized wells on the list. Twenty-six contracts have been issued for a total of 33 wells, and 19 wells have been plugged since the program's field operations began in 2006. However, the program is often challenged by the difficulties associated with determining where the wells are located. Many of the wells have been cut off and buried, and access is often dependent on weather conditions and road restrictions. There is also a shortage of contractors who have experience working with older wells. It was concluded that the program will expand by obtaining further funding and modifying its qualification criteria. tabs., figs

Functional Programming in R

DEFF Research Database (Denmark)

Mailund, Thomas

Master functions and discover how to write functional programs in R. In this book, you'll make your functions pure by avoiding side-effects; you’ll write functions that manipulate other functions, and you’ll construct complex functions using simpler functions as building blocks. In Functional...... Programming in R, you’ll see how we can replace loops, which can have side-effects, with recursive functions that can more easily avoid them. In addition, the book covers why you shouldn't use recursion when loops are more efficient and how you can get the best of both worlds. Functional programming...... is a style of programming, like object-oriented programming, but one that focuses on data transformations and calculations rather than objects and state. Where in object-oriented programming you model your programs by describing which states an object can be in and how methods will reveal or modify...

Functional Programming in R

DEFF Research Database (Denmark)

Mailund, Thomas

2017-01-01

Master functions and discover how to write functional programs in R. In this book, you'll make your functions pure by avoiding side-effects; you’ll write functions that manipulate other functions, and you’ll construct complex functions using simpler functions as building blocks. In Functional...... Programming in R, you’ll see how we can replace loops, which can have side-effects, with recursive functions that can more easily avoid them. In addition, the book covers why you shouldn't use recursion when loops are more efficient and how you can get the best of both worlds. Functional programming...... is a style of programming, like object-oriented programming, but one that focuses on data transformations and calculations rather than objects and state. Where in object-oriented programming you model your programs by describing which states an object can be in and how methods will reveal or modify...

CROSSER - CUMULATIVE BINOMIAL PROGRAMS

Science.gov (United States)

Bowerman, P. N.

1994-01-01

The cumulative binomial program, CROSSER, is one of a set of three programs which calculate cumulative binomial probability distributions for arbitrary inputs. The three programs, CROSSER, CUMBIN (NPO-17555), and NEWTONP (NPO-17556), can be used independently of one another. CROSSER can be used by statisticians and users of statistical procedures, test planners, designers, and numerical analysts. The program has been used for reliability/availability calculations. CROSSER calculates the point at which the reliability of a k-out-of-n system equals the common reliability of the n components. It is designed to work well with all integer values 0 < k <= n. To run the program, the user simply runs the executable version and inputs the information requested by the program. The program is not designed to weed out incorrect inputs, so the user must take care to make sure the inputs are correct. Once all input has been entered, the program calculates and lists the result. It also lists the number of iterations of Newton's method required to calculate the answer within the given error. The CROSSER program is written in C. It was developed on an IBM AT with a numeric co-processor using Microsoft C 5.0. Because the source code is written using standard C structures and functions, it should compile correctly with most C compilers. The program format is interactive. It has been implemented under DOS 3.2 and has a memory requirement of 26K. CROSSER was developed in 1988.

76 FR 34541 - Child and Adult Care Food Program Improving Management and Program Integrity

Science.gov (United States)

2011-06-13

... 7 CFR Parts 210, 215, 220 et al. Child and Adult Care Food Program Improving Management and Program..., 220, 225, and 226 RIN 0584-AC24 Child and Adult Care Food Program Improving Management and Program... management and integrity in the Child and Adult Care Food Program (CACFP), at 67 FR 43447 (June 27, 2002) and...

Intelligence of programs

Energy Technology Data Exchange (ETDEWEB)

Novak, D

1982-01-01

A general discussion about the level of artificial intelligence in computer programs is presented. The suitability of various languages for the development of complex, intelligent programs is discussed, considering fourth-generation language as well as the well established structured COBOL language. It is concluded that the success of automation in many administrative fields depends to a large extent on the development of intelligent programs.

Surplus Facilities Management Program

International Nuclear Information System (INIS)

Coobs, J.H.

1983-01-01

This is the second of two programs that are concerned with the management of surplus facilities. The facilities in this program are those related to commercial activities, which include the three surplus experimental and test reactors [(MSRE, HRE-2, and the Low Intensity Test Reactor (LITR)] and seven experimental loops at the ORR. The program is an integral part of the Surplus Facilities Management Program, which is a national program administered for DOE by the Richland Operations Office. Very briefly reported here are routine surveillance and maintenance of surplus radioactively contaminated DOE facilities awaiting decommissioning

Energy research program 82

International Nuclear Information System (INIS)

1982-01-01

The energy research program 82 (EFP-82) is prepared by the Danish ministry of energy in order to continue the extension of the Danish energy research and development started through the former trade ministry's programs EM-1 (1976) and EM-2 (1978), and the energy ministry's programs EFP-80 and EFP-81. The new program is a continuation of the activities in the period 1982-84 with a total budget of 100 mio.Dkr. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (BP)

Computer Programs.

Science.gov (United States)

Anderson, Tiffoni

This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

Ostomy Home Skills Program

Medline Plus

Full Text Available ... ACS Careers at ACS About ACS Career Types Working at ACS ... Education Patients and Family Skills Programs Ostomy Home Skills Program Ostomy Home Skills Program Adult Ostomy ...

Programs as Data Objects

DEFF Research Database (Denmark)

This book constitutes the refereed proceedings of the Second Symposium on Programs as Data Objects, PADO 2001, held in Aarhus, Denmark, in May 2001. The 14 revised full papers presented were carefully reviewed and selected from 30 submissions. Various aspects of looking at programs as data objects...... are covered from the point of view of program analysis, program transformation, computational complexity, etc....

MIDI Programming in Scheme

DEFF Research Database (Denmark)

Nørmark, Kurt

2010-01-01

makes it possible to carry out systematic modifications and transformations of MIDI contents with use of pure functional programming. Side by side with the XML-inspired MIDI language, the paper describes an Emacs-based, textual programming environment that supports the MIDI programming process....... The programming environment also supports a variety of interactive features - similar to MIDI sequencers - but restricted to a textual representation of the music. The main contributions of the work are considered to be (1) An accumulated MIDI function library, which can transform MIDI files in many non......-trivial ways; (2) A proposed working process alternating between creative mode and programmatic editing mode within a MIDI programming environment; and (3) A textual MIDI programming environment with embedded support of many interactive, MIDI-related functionalities....

Mondelēz Hope Kitchen Program, China: a Program Impact Pathways (PIP) analysis.

Science.gov (United States)

Li, Yanran; Yao, Xiaoxun; Gu, Lan

2014-09-01

Mondelēz Hope Kitchen is a community program initiated jointly in 2009 by Mondelēz International and the China Youth Development Foundation (CYDF). In response to the urgent needs of students, parents, and teachers at primary and middle schools in poverty-stricken rural areas of China, the program addresses the complex and intertwined issues of undernutrition and obesity. By funding both kitchen equipment and teacher training in health and nutrition, the Mondelēz Hope Kitchen Program improves the capacity of schools to supply healthy meals, helping students to access safe and nutritious foods and, ultimately, to improve their nutritional status and health. In 2011, the Mondelēz International Foundation awarded CYDF a grant to formally assess the impact of the original program design. The Mondelēz International Foundation encouraged CYDF and six other healthy lifestyles-focused community partners around the world to participate in this program evaluation workshop. The goals of this study were to describe the logic model of the Mondelēz Hope Kitchen Program, summarize a recent evaluation of the Mondelēz Hope Kitchen Program, and conduct a Program Impact Pathways (PIP) analysis to identify Critical Quality Control Points (CCPs) and a suite of impact indicators. The findings were presented at the Healthy Lifestyles Program Evaluation Workshop held in Granada, Spain, 13-14 September 2013, under the auspices of the Mondelēz International Foundation. The authors developed the program's PIP diagram based on deliberations involving the program managers and Director and consulting the "Hope Kitchen Management Rules "and "Hope Kitchen Inspection and Acceptance Report". The PIP analyses identified three CCPs: buy-in from schools, kitchen infrastructure, and changes in teachers' knowledge of nutrition after training. In addition, changes in children's knowledge of nutrition will be added to the core suite of impact evaluation indicators that also includes children

A review of pediatric dentistry program websites: what are applicants learning about our programs?

Science.gov (United States)

Lin, Jenn-Yih; Lee, Jung; Davidson, Bo; Farquharson, Kara; Shaul, Cheryl; Kim, Sara

2010-06-01

The purpose of this study was twofold: 1) to examine website content provided by U.S. and Canadian pediatric dentistry residency programs, and 2) to understand aspects of program websites that dental students report to be related to their interests. Sixty-eight program websites were reviewed by five interprofessional evaluators. A thirty-six-item evaluation form was organized into 1) program descriptive items listed on the American Academy of Pediatric Dentistry (AAPD) website (n=21); 2) additional program descriptive items not listed on the AAPD website but of interest (n=9); and 3) items related to website interface design (n=5). We also surveyed fifty-four dental students regarding their interest in various aspects of program descriptions. The results of this study suggest that pediatric dentistry residency programs in general tend to provide identical or less information than what is listed on the AAPD website. The majority of respondents (76 percent) reported that residency program websites would be their first source of information about advanced programs. The greatest gap between the available website information and students' interests exists in these areas: stipend and tuition information, state licensure, and program strengths. Pediatric dentistry residency programs underutilize websites as a marketing and recruitment tool and should incorporate more information in areas of students' priority interests.

Developmental Programming of Renal Function and Re-Programming Approaches

Science.gov (United States)

Nüsken, Eva; Dötsch, Jörg; Weber, Lutz T.; Nüsken, Kai-Dietrich

2018-01-01

Chronic kidney disease affects more than 10% of the population. Programming studies have examined the interrelationship between environmental factors in early life and differences in morbidity and mortality between individuals. A number of important principles has been identified, namely permanent structural modifications of organs and cells, long-lasting adjustments of endocrine regulatory circuits, as well as altered gene transcription. Risk factors include intrauterine deficiencies by disturbed placental function or maternal malnutrition, prematurity, intrauterine and postnatal stress, intrauterine and postnatal overnutrition, as well as dietary dysbalances in postnatal life. This mini-review discusses critical developmental periods and long-term sequelae of renal programming in humans and presents studies examining the underlying mechanisms as well as interventional approaches to “re-program” renal susceptibility toward disease. Clinical manifestations of programmed kidney disease include arterial hypertension, proteinuria, aggravation of inflammatory glomerular disease, and loss of kidney function. Nephron number, regulation of the renin–angiotensin–aldosterone system, renal sodium transport, vasomotor and endothelial function, myogenic response, and tubuloglomerular feedback have been identified as being vulnerable to environmental factors. Oxidative stress levels, metabolic pathways, including insulin, leptin, steroids, and arachidonic acid, DNA methylation, and histone configuration may be significantly altered by adverse environmental conditions. Studies on re-programming interventions focused on dietary or anti-oxidative approaches so far. Further studies that broaden our understanding of renal programming mechanisms are needed to ultimately develop preventive strategies. Targeted re-programming interventions in animal models focusing on known mechanisms will contribute to new concepts which finally will have to be translated to human application

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Trauma Quality Programs National Trauma Data Bank Trauma Quality Improvement Program Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals ...

Automatic programming for critical applications

Science.gov (United States)

Loganantharaj, Raj L.

1988-01-01

The important phases of a software life cycle include verification and maintenance. Usually, the execution performance is an expected requirement in a software development process. Unfortunately, the verification and the maintenance of programs are the time consuming and the frustrating aspects of software engineering. The verification cannot be waived for the programs used for critical applications such as, military, space, and nuclear plants. As a consequence, synthesis of programs from specifications, an alternative way of developing correct programs, is becoming popular. The definition, or what is understood by automatic programming, has been changed with our expectations. At present, the goal of automatic programming is the automation of programming process. Specifically, it means the application of artificial intelligence to software engineering in order to define techniques and create environments that help in the creation of high level programs. The automatic programming process may be divided into two phases: the problem acquisition phase and the program synthesis phase. In the problem acquisition phase, an informal specification of the problem is transformed into an unambiguous specification while in the program synthesis phase such a specification is further transformed into a concrete, executable program.

Economic Evaluation of a Comprehensive Teenage Pregnancy Prevention Program: Pilot Program

Science.gov (United States)

Rosenthal, Marjorie S.; Ross, Joseph S.; Bilodeau, RoseAnne; Richter, Rosemary S.; Palley, Jane E.; Bradley, Elizabeth H.

2011-01-01

Background Previous research has suggested that comprehensive teenage pregnancy prevention programs that address sexual education and life skills development and provide academic are effective in reducing births among enrolled teenagers. However, there have been limited data on costs and cost-effectiveness of such programs. Objectives To use a community-based participatory research approach, to develop estimates of the cost-benefit of the Pathways/Senderos Center, a comprehensive neighborhood-based program to prevent unintended pregnancies and promote positive development for adolescents. Methods Using data from 1997-2003, we conducted an in-time intervention analysis to determine program cost-benefit while teenagers were enrolled and then used an extrapolation analysis to estimate accyrred economibc benefits and cost-benefit up to age 30. Results The program operating costs totaled $3,228,152.59 and reduced the teenage childbearing rate from 94.10 to 40.00 per 1000 teenage females, averting $52,297.84 in total societal costs, with an economic benefit to society from program participation of $2,673,153.11. Therefore, total costs to society exceeded economic benefits by $559,677.05, or $1,599.08 per adolescent per year. In an extrapolation analysis, benefits to society exceed costs by $10,474.77 per adolescent per year by age 30 on average, with social benefits outweighing total social costs by age 20.1. Conclusions We estimate that this comprehensive teenage pregnancy prevention program would provide societal economic benefits once participants are young adults, suggesting the need to expand beyond pilot demonstrations and evaluate the long-range cost-effectiveness of similarly comprehensive programs when implemented more widely in high-risk neighborhoods. PMID:19896030

Economic evaluation of a comprehensive teenage pregnancy prevention program: pilot program.

Science.gov (United States)

Rosenthal, Marjorie S; Ross, Joseph S; Bilodeau, Roseanne; Richter, Rosemary S; Palley, Jane E; Bradley, Elizabeth H

2009-12-01

Previous research has suggested that comprehensive teenage pregnancy prevention programs that address sexual education and life skills development and provide academic support are effective in reducing births among enrolled teenagers. However, there have been limited data on the costs and cost effectiveness of such programs. The study used a community-based participatory research approach to develop estimates of the cost-benefit of the Pathways/Senderos Center, a comprehensive neighborhood-based program to prevent unintended pregnancies and promote positive development for adolescents. Using data from 1997-2003, an in-time intervention analysis was conducted to determine program cost-benefit while teenagers were enrolled; an extrapolation analysis was then used to estimate accrued economic benefits and cost-benefit up to age 30 years. The program operating costs totaled $3,228,152.59 and reduced the teenage childbearing rate from 94.10 to 40.00 per 1000 teenage girls, averting $52,297.84 in total societal costs, with an economic benefit to society from program participation of $2,673,153.11. Therefore, total costs to society exceeded economic benefits by $559,677.05, or $1599.08 per adolescent per year. In an extrapolation analysis, benefits to society exceed costs by $10,474.77 per adolescent per year by age 30 years on average, with social benefits outweighing total social costs by age 20.1 years. This comprehensive teenage pregnancy prevention program is estimated to provide societal economic benefits once participants are young adults, suggesting the need to expand beyond pilot demonstrations and evaluate the long-range cost effectiveness of similarly comprehensive programs when they are implemented more widely in high-risk neighborhoods.

Programs as Polypeptides.

Science.gov (United States)

Williams, Lance R

2016-01-01

Object-oriented combinator chemistry (OOCC) is an artificial chemistry with composition devices borrowed from object-oriented and functional programming languages. Actors in OOCC are embedded in space and subject to diffusion; since they are neither created nor destroyed, their mass is conserved. Actors use programs constructed from combinators to asynchronously update their own states and the states of other actors in their neighborhoods. The fact that programs and combinators are themselves reified as actors makes it possible to build programs that build programs from combinators of a few primitive types using asynchronous spatial processes that resemble chemistry as much as computation. To demonstrate this, OOCC is used to define a parallel, asynchronous, spatially distributed self-replicating system modeled in part on the living cell. Since interactions among its parts result in the construction of more of these same parts, the system is strongly constructive. The system's high normalized complexity is contrasted with that of a simple composome.

Fuel channel in-service inspection programs program design for maximum cost effectiveness

International Nuclear Information System (INIS)

Van den Brekel, N.C.

1995-01-01

Inspection is an integral part of fuel channel life management strategy. Inspection data is used to assess the state of reactor core integrity and provide the information necessary to optimize long term maintenance programs. This paper will provide an overview of the structured approach to developing fuel channel inspection programs within OHN. The inspection programs are designed to balance the resources utilized (cost, outage time, and dose expenditure) with the benefits provided by the inspection data obtained (improved knowledge of component status, degradation mechanisms and rates, etc..). The CANDU community has yet to have a fuel channel operate for a full 30 year design life. Since research programs can not fully simulate reactor operating conditions, inspections become an essential feature of the life management strategy as the components age. Inspection programs often include activities designed to develop predictive capability for long term fuel channel behaviour and provide early warning of changes in behaviour. It should be noted that although this paper addresses the design of fuel channel inspection programs, the basic principles presented can be applied to the design of inspection programs for any major power plant component or system. (author)

The SBIRT program matrix: a conceptual framework for program implementation and evaluation.

Science.gov (United States)

Del Boca, Frances K; McRee, Bonnie; Vendetti, Janice; Damon, Donna

2017-02-01

Screening, Brief Intervention and Referral to Treatment (SBIRT) is a comprehensive, integrated, public health approach to the delivery of services to those at risk for the adverse consequences of alcohol and other drug use, and for those with probable substance use disorders. Research on successful SBIRT implementation has lagged behind studies of efficacy and effectiveness. This paper (1) outlines a conceptual framework, the SBIRT Program Matrix, to guide implementation research and program evaluation and (2) specifies potential implementation outcomes. Overview and narrative description of the SBIRT Program Matrix. The SBIRT Program Matrix has five components, each of which includes multiple elements: SBIRT services; performance sites; provider attributes; patient/client populations; and management structure and activities. Implementation outcomes include program adoption, acceptability, appropriateness, feasibility, fidelity, costs, penetration, sustainability, service provision and grant compliance. The Screening, Brief Intervention and Referral to Treatment Program Matrix provides a template for identifying, classifying and organizing the naturally occurring commonalities and variations within and across SBIRT programs, and for investigating which variables are associated with implementation success and, ultimately, with treatment outcomes and other impacts. © 2017 Society for the Study of Addiction.

Stop smoking support programs

Science.gov (United States)

Smokeless tobacco - stop smoking programs; Stop smoking techniques; Smoking cessation programs; Smoking cessation techniques ... You can find out about smoking cessation programs from: Your ... Your employer Your local health department The National Cancer ...

National Transuranic Program Charter

International Nuclear Information System (INIS)

1994-10-01

The National Transuranic Program Plan and Charter describes the functional elements of the National TRU Program, organizational relationships, programmatic responsibilities, division of work scope among the various DOE organizations that comprise the program, and program baselines against which overall progress will be measured. The charter defines the authorities and responsibilities of various organizations involved in the management of TRU waste throughout the DOE complex

OSO-8 soft X-ray wheel experiment: Data analysis

Science.gov (United States)

Kraushaar, W. L.

1982-01-01

The soft X-ray experiment hardware and its operation are described. The device included six X-ray proportional counters, two of which, numbers 1 and 4, were pressurized with on-board methane gas supplies. Number 4 developed an excessive leak rate early in the mission and was turned off on 1975 day number 282 except for brief (typically 2-hour) periods up to day 585 after which it as left off. Counter 1 worked satisfactorily until 1975 day number 1095 (January 1, 1978) at which time the on-board methane supply was depleted. The other four counters were sealed and all except number 3 worked satisfactorily throughout the mission which terminated with permanent satellie shut-down on day 1369. This was the first large area thin-window, gas-flow X-ray detector to be flown in orbit. The background problems were severe and consumed a very large portion of the data analysis effort. These background problems were associated with the Earth's trapped electron belts.

Numerical studies of rock-gas flow in Yucca Mountain; Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Ross, B.; Amter, S.; Lu, Ning [Disposal Safety, Inc., Washington, DC (United States)

1992-02-01

A computer model (TGIF -- Thermal Gradient Induced Flow) of two-dimensional, steady-state rock-gas flow driven by temperature and humidity differences is described. The model solves for the ``fresh-water head,`` a concept that has been used in models of variable-density water flow but has not previously been applied to gas flow. With this approach, the model can accurately simulate the flows driven by small differences in temperature. The unsaturated tuffs of Yucca Mountain, Nevada, are being studied as a potential site for a repository for high-level nuclear waste. Using the TGIF model, preliminary calculations of rock-gas flow in Yucca Mountain are made for four east-west cross-sections through the mountain. Calculations are made for three repository temperatures and for several assumptions about a possible semi-confining layer above the repository. The gas-flow simulations are then used to calculate travel-time distributions for air and for radioactive carbon-14 dioxide from the repository to the ground surface.

Production of high specific activity silicon-32

International Nuclear Information System (INIS)

Phillips, D.R.; Brzezinski, M.A.

1998-01-01

This is the final report of a three-year, Laboratory Directed Research and Development Project (LDRD) at Los Alamos National Laboratory (LANL). There were two primary objectives for the work performed under this project. The first was to take advantage of capabilities and facilities at Los Alamos to produce the radionuclide 32 Si in unusually high specific activity. The second was to combine the radioanalytical expertise at Los Alamos with the expertise at the University of California to develop methods for the application of 32 Si in biological oceanographic research related to global climate modeling. The first objective was met by developing targetry for proton spallation production of 32 Si in KCl targets and chemistry for its recovery in very high specific activity. The second objective was met by developing a validated field-useable, radioanalytical technique, based upon gas-flow proportional counting, to measure the dynamics of silicon uptake by naturally occurring diatoms

Development of methods for activity determination for radionuclides with double decay emission β- β+ / electron capture - application to the standardization of 192Ir, 152Eu and 186 Re

International Nuclear Information System (INIS)

Hilario, Katia Aparecida Fonseca

2002-01-01

In the present work alternative procedures have been developed for standardization of radionuclides with double decay, β - β + / electron capture using the 4πβ-γ coincidence technique, applying different systems. Two 4πβ-γ coincidence systems were used: one with a 4π gas-flow proportional counter coupled to a pair of NaI(Tl) scintillators and the other one with the same type of proportional counter coupled to HPGe detector. The radionuclides selected for this standardization, due to great interest in nuclear medicine, detector calibration and industrial radiography, were 192 Ir, 152 Eu and 186 Re. The first and the second were part of international comparisons sponsored by the Bureau International des Poids et Mesures (BIPM), France, who supplied the radioactive solution. For 186 Re, the gamma-ray emission probability per decay was measured by means REGe spectrometer system, previously calibrated with standard ampoules. All the uncertainties involved were treated rigorously, by means of covariance analysis. (author)

Combustion-assisted laser cutting of a difficult-to-machine superalloy

International Nuclear Information System (INIS)

Molian, P.A.

1992-01-01

In laser cutting, the largest single application of lasers in manufacturing, the assist gas plays an important role in affecting the cutting performance. The assist gas is usually oxygen or an inert gas. In this paper acetylene and oxygen was employed to create combustion reactions during CO 2 laser cutting that enabled an improvement in the cutting speed, and cut quality of a difficult-to-machine superalloy. A comparison with laser cutting of a plain carbon steel under identical conditions was also made to determine the usefulness of combustion energy. Results indicate that both cutting speed and quality are enhanced by the reduction in the viscosity of slag formed during cutting (which assisted in ejection of the slag through the bottom of the kerf) due to the heat released by the acetylene burning inside the kerf. Correlations of experimental data with a theoretical model provided the influence of combustion power and gas-flow power on the cutting phenomena

Gas-fueling studies in the PDX tokamak

International Nuclear Information System (INIS)

Dylla, H.F.; Blanchard, W.R.; Budny, R.; Fonck, R.J.; Owens, D.K.; Schmidt, G.L.

1982-08-01

The characteristics of gas-fueling of high power discharges in the PDX tokamak have been investigated using gas-flow, neutral pressure, plasma density, and Hα emission measurements. The efficiency of gas-fueling was measured for various plasma configurations by comparison of the measured gas-influx rates to the particle exhaust rates inferred from particle decay time measurements. We observe that the fueling efficiency decreases significantly with increasing plasma density as the ionization length for thermal neutrals becomes shorter than the width of the boundary plasma. Gas fueling rates required to maintain a given plasma density are considerably higher (by factors of 5 to 10) for diverted discharges compared to limiter discharges. This result is attributed to a lower effective recycling coefficient for diverted plasmas. We discuss the dependence of the particle balance on the following experimentally measured parameters: the particle containment time, system-pumping speed, and neutral pressure in the vicinity of the active pumps

Fabrication and measurement of gas electron multiplier

International Nuclear Information System (INIS)

Zhang Minglong; Xia Yiben; Wang Linjun; Gu Beibei; Wang Lin; Yang Ying

2005-01-01

Gas electron multiplier (GEM) with special performance has been widely used in the field of radiation detectors. In this work, GEM film was fabricated using a 50 μm -thick kapton film by the therma evaporation and laser masking drilling technique. GEM film has many uniformly arrayed holes with a diameter of 100 μm and a gap of 223 μm. It was then set up to a gas-flowing detector with an effective area of 3 x 3 cm 2 , 5.9 keV X-ray generated from a 55 Fe source was used to measure the pulse height distribution of GEM operating at various high voltage and gas proportion. The effect of high potential and gas proportion on the count rate and the energy resolution was discussed in detail. The results indicate that GEM has a very high ratio of signal to noise and better energy resolution of 18.2%. (authors)

Numerical studies of rock-gas flow in Yucca Mountain

International Nuclear Information System (INIS)

Ross, B.; Amter, S.; Lu, Ning

1992-02-01

A computer model (TGIF -- Thermal Gradient Induced Flow) of two-dimensional, steady-state rock-gas flow driven by temperature and humidity differences is described. The model solves for the ''fresh-water head,'' a concept that has been used in models of variable-density water flow but has not previously been applied to gas flow. With this approach, the model can accurately simulate the flows driven by small differences in temperature. The unsaturated tuffs of Yucca Mountain, Nevada, are being studied as a potential site for a repository for high-level nuclear waste. Using the TGIF model, preliminary calculations of rock-gas flow in Yucca Mountain are made for four east-west cross-sections through the mountain. Calculations are made for three repository temperatures and for several assumptions about a possible semi-confining layer above the repository. The gas-flow simulations are then used to calculate travel-time distributions for air and for radioactive carbon-14 dioxide from the repository to the ground surface

Proportional 4π detector with an electric field of axial symmetry

International Nuclear Information System (INIS)

Guevara, E.A.; Costello, E.D.

1984-01-01

A gas-flow proportional 4π counter, with an electric field of axial symmetry, designed and constructed by the authors, whose characteristics allow to work at positive gaseous pressure, is described. Based on the results from the measurements performed, the new detector proved to be suitable for the absolute calibration of beta-emitting radioactive sources and that the accuracy of the determinations can be compared with that achieved at metrologic laboratories of recognized accuracy. The slight dependence of the detector's efficiency on the nuclide's beta energy within the limits studied and its good performance for the measurements of non-punctual sources, are emphasized. Moreover, the spectra obtained, the disintegration schemes and the type of beta transition for each calibrated nuclide are presented. Some detector's parameters of certain interest, the capacity of the chambers in air and the loss of current at the working voltage are included in an annex. (M.E.L.) [es

Characterization of X-ray optics by soft X-ray diffractometry

International Nuclear Information System (INIS)

Biltoft, P.J.

1988-01-01

The authors have constructed a soft x-ray diffractometer to characterize layered synthetic microstructures (LSMs). The source, sample stage, and counter sections of the diffractometer operate under vacuum. The design differs from most others in two respects: the preamplifier and amplifier that process pulses from the subatmospheric-pressure gas-flow proportional counter are located outside the vacuum chamber and are separated from the proportional counter by approximately 76 cm of shielded cable; in addition, the conventional gear-driven, theta-two-theta diffractometer motion is accomplished with synchronized stepper motors. Characterizations of several LSMs have yielded data on d-spacing (distance between layers of different composition), critical angle, and peak reflectivity. Future work includes incorporation of an improved laser alignment system, in vacuo sample articulation (in addition to the theta-two-theta diffractometer movements), and a higher-flux photon source with a close-coupled fluorescent target carousel. Such a capability will permit multiple-energy diffraction work in a single pumpdown cycle

Coastal nonpoint pollution control program: Program development and approval guidance

International Nuclear Information System (INIS)

1993-01-01

The document, developed by NOAA and EPA, contains guidance for states in developing and implementing their coastal nonpoint pollutant source programs. It describes the requirements that must be met, including: the geographic scope of the program; the pollutant sources to be addressed; the types of management measures used; the establishment of critical areas; technical assistance, public participation, and administrative coordination; and, the process for program submission and Federal approval. The document also contains the criteria by which NOAA and EPA will review the states' submissions

77 FR 13530 - Funding for the Conservation Loan Program; Farm Loan Programs

Science.gov (United States)

2012-03-07

... DEPARTMENT OF AGRICULTURE Farm Service Agency Funding for the Conservation Loan Program; Farm Loan... Service Agency (FSA) now has funding for and is accepting guaranteed loan applications for the Conservation Loan (CL) Program. Due to a lack of program funding for direct CLs, direct loan applications are...

Training Accreditation Program

International Nuclear Information System (INIS)

1989-01-01

The Training Accreditation Program establishes the objectives and criteria against which DOE nuclear facility training is evaluated to determine its readiness for accreditation. Training programs are evaluated against the accreditation objectives and criteria by facility personnel during the initial self-evaluation process. From this self-evaluation, action plans are made by the contractor to address the scope of work necessary in order to upgrade any deficiencies noted. This scope of work must be formally documented in the Training Program Accreditation Plan. When reviewed and approved by the responsible Head of the Field Organization and cognizant Program Secretarial Office, EH-1 concurrence is obtained. This plan then becomes the document which guides accreditation efforts for the contractor

Energy research program 84

International Nuclear Information System (INIS)

1984-01-01

The energy research program 84 (EFP-84) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82 and EFP-83. The new program is a continuation of the activities in the period 1984-86 with a total budget of 112 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

C++ how to program

CERN Document Server

Deitel, Paul J

2014-01-01

This best-selling comprehensive text is aimed at readers with little or no programming experience. It teaches programming by presenting the concepts in the context of full working programs and takes an early-objects approach. The authors emphasize achieving program clarity through structured and object-oriented programming, software reuse and component-oriented software construction. The Ninth Edition encourages students to connect computers to the community, using the Internet to solve problems and make a difference in our world. All content has been carefully fine-tuned in response to a team of distinguished academic and industry reviewers.

Energy research program 83

International Nuclear Information System (INIS)

1983-01-01

The energy research program 83 (EFP-83) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81 and EFP-82. The new program is a continuation of the activities in the period 1983-85 with a total budget of 111 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Energy research program 85

International Nuclear Information System (INIS)

1985-01-01

The energy research program 85 (EFP-85) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, and EFP-84. The new program is a continuation of the activities in the period 1985-87 with a total budget of 110 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Diabetes Prevention Program (DPP)

Science.gov (United States)

... Recruiting Patients & Families Consortia, Networks & Centers Reports & Planning Diabetes Prevention Program (DPP) The NIDDK-sponsored Diabetes Prevention ... Diabetes Prevention Program for those who are eligible. Diabetes Prevention Program (DPP) DPP Goal The DPP looked ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Military Health System Strategic Partnership Military Health System Strategic Partnership About Excelsior Surgical Society ... Programs Quality Programs Overview About Quality Programs ACS Leadership in Quality ACS Leadership in Quality Setting the ...

New Production Reactors Program Plan

Energy Technology Data Exchange (ETDEWEB)

1990-12-01

Part I of this New Production Reactors (NPR) Program Plan: describes the policy basis of the NPR Program; describes the mission and objectives of the NPR Program; identifies the requirements that must be met in order to achieve the mission and objectives; and describes and assesses the technology and siting options that were considered, the Program's preferred strategy, and its rationale. The implementation strategy for the New Production Reactors Program has three functions: Linking the design, construction, operation, and maintenance of facilities to policies requirements, and the process for selecting options. The development of an implementation strategy ensures that activities and procedures are consistent with the rationale and analysis underlying the Program. Organization of the Program. The strategy establishes plans, organizational structure, procedures, a budget, and a schedule for carrying out the Program. By doing so, the strategy ensures the clear assignment of responsibility and accountability. Management and monitoring of the Program. Finally, the strategy provides a basis for monitoring the Program so that technological, cost, and scheduling issues can be addressed when they arise as the Program proceeds. Like the rest of the Program Plan, the Implementation Strategy is a living document and will be periodically revised to reflect both progress made in the Program and adjustments in plans and policies as they are made. 21 figs., 5 tabs.

New Production Reactors Program Plan

International Nuclear Information System (INIS)

1990-12-01

Part I of this New Production Reactors (NPR) Program Plan: describes the policy basis of the NPR Program; describes the mission and objectives of the NPR Program; identifies the requirements that must be met in order to achieve the mission and objectives; and describes and assesses the technology and siting options that were considered, the Program's preferred strategy, and its rationale. The implementation strategy for the New Production Reactors Program has three functions: Linking the design, construction, operation, and maintenance of facilities to policies requirements, and the process for selecting options. The development of an implementation strategy ensures that activities and procedures are consistent with the rationale and analysis underlying the Program. Organization of the Program. The strategy establishes plans, organizational structure, procedures, a budget, and a schedule for carrying out the Program. By doing so, the strategy ensures the clear assignment of responsibility and accountability. Management and monitoring of the Program. Finally, the strategy provides a basis for monitoring the Program so that technological, cost, and scheduling issues can be addressed when they arise as the Program proceeds. Like the rest of the Program Plan, the Implementation Strategy is a living document and will be periodically revised to reflect both progress made in the Program and adjustments in plans and policies as they are made. 21 figs., 5 tabs

State Energy Program Operations Manual

Energy Technology Data Exchange (ETDEWEB)

Office of Building Technology, State and Community Programs

1999-03-17

The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

Higher-Order Program Generation

DEFF Research Database (Denmark)

Rhiger, Morten

for OCaml, a dialect of ML, that provides run-time code generation for OCaml programs. We apply these byte-code combinators in semantics-directed compilation for an imperative language and in run-time specialization using type-directed partial evaluation. Finally, we present an approach to compiling goal......This dissertation addresses the challenges of embedding programming languages, specializing generic programs to specific parameters, and generating specialized instances of programs directly as executable code. Our main tools are higher-order programming techniques and automatic program generation....... It is our thesis that they synergize well in the development of customizable software. Recent research on domain-specific languages propose to embed them into existing general-purpose languages. Typed higher-order languages have proven especially useful as meta languages because they provide a rich...

Computer Program Newsletter No. 7

International Nuclear Information System (INIS)

Magnuson, W.G. Jr.

1982-09-01

This issue of the Computer Program Newsletter updates an earlier newsletter (Number 2, September 1979) and focuses on electrical network analysis computer programs. In particular, five network analysis programs (SCEPTRE, SPICE2, NET2, CALAHAN, and EMTP) will be described. The objective of this newsletter will be to provide a very brief description of the input syntax and semantics for each program, highlight their strong and weak points, illustrate how the programs are run at Lawrence Livermore National Laboratory using the Octopus computer network, and present examples of input for each of the programs to illustrate some of the features of each program. In a sense, this newsletter can be used as a quick reference guide to the programs

On termination of meta-programs

NARCIS (Netherlands)

Serebrenik, A.; De Schreye, D.; Nieuwenhuis, R.; Voronkov, A.

2001-01-01

The term meta-programming refers to the ability of writing programs that have other programs as data and exploit their semantics [4]. The choice of logic programming as a basis for meta-programming offers a number of practical and theoretical advantages. One of them is the possibility of tackling

Attitudes of program directors toward women in pediatric dentistry training programs.

Science.gov (United States)

Seale, N S; Waggoner, W F

1992-01-01

The number of women entering pediatric dentistry graduate programs is increasing. A formal survey was conducted in the fall of 1990 to determine what impact, if any, this increase is having on the programs. The survey sample consisted of the 57 pediatric dentistry graduate program directors from the United States and Canada. The survey form included program data about gender distribution in the current and previous classes, and female faculty distribution within the programs. The survey requested information about the attitudes of various groups of individuals who interacted with the residents relative to the gender of the resident and again, relative to whether the resident was pregnant. Inquiry was made concerning maternity leave policies and selected treatment scenarios involving pregnant residents. Finally, questions were asked about motivational factors, personal priorities, and policy change for female vs. male residents. Fifty forms were returned for a return rate of 88%. The 48 forms analyzed revealed that 52% of current classes are female and 51% of applicants for 1991 were female. Women comprise 23% of full-time and 26% of part-time faculty. There was no single issue perceived by program directors as a group to be a significant concern or problem relating to gender. Program directors would consider removing pregnant females from contact with combative patients (83%) and environmental hazards (85%), but fewer would consider removing them from contact with for HIV+ or Hb+ patients.

Multi-dimensional Rankings, Program Termination, and Complexity Bounds of Flowchart Programs

Science.gov (United States)

Alias, Christophe; Darte, Alain; Feautrier, Paul; Gonnord, Laure

Proving the termination of a flowchart program can be done by exhibiting a ranking function, i.e., a function from the program states to a well-founded set, which strictly decreases at each program step. A standard method to automatically generate such a function is to compute invariants for each program point and to search for a ranking in a restricted class of functions that can be handled with linear programming techniques. Previous algorithms based on affine rankings either are applicable only to simple loops (i.e., single-node flowcharts) and rely on enumeration, or are not complete in the sense that they are not guaranteed to find a ranking in the class of functions they consider, if one exists. Our first contribution is to propose an efficient algorithm to compute ranking functions: It can handle flowcharts of arbitrary structure, the class of candidate rankings it explores is larger, and our method, although greedy, is provably complete. Our second contribution is to show how to use the ranking functions we generate to get upper bounds for the computational complexity (number of transitions) of the source program. This estimate is a polynomial, which means that we can handle programs with more than linear complexity. We applied the method on a collection of test cases from the literature. We also show the links and differences with previous techniques based on the insertion of counters.

THE ESTABLISHMENT OF A U.S. SUPPORT PROGRAM INTERSHIP PROGRAM

International Nuclear Information System (INIS)

PEPPER, S.E.

2003-01-01

In 2002, the U.S. Support Program to IAEA Safeguards established a program of one-year paid internships with the IAEA Department of Safeguards for students and recent graduates. Six interns are currently working with the IAEA in software development and information collection activities. The program is administered through the International Safeguards Project Office (ISPO) at Brookhaven National Laboratory (BNL). Software development assignments were considered to be most feasible because of the considerable abilities of many computer science students after a few years' education. Candidates in information science were also recruited because of an existing internship program managed by the Monterey Institute of International Studies. ISPO recruited students from US. colleges and other sources. Applications were collected and provided to the IAEA for review and selection. SGIT then identified the best applicants and, after confirming their intention to accept the position, tailored assignments based on their qualifications. Before the assignments started, ISPO conducted an orientation to provide the interns with information to ease their transition into working with the IAEA and living in Vienna. Four interns began their assignments in software development in June 2002 and two others began their assignments in information collection in July and August. The IAEA, the interns, and the Subgroup on Safeguards Technical Support have found the assignments to be beneficial. The internship program provides additional staff to the IAEA at low cost to the USSP, introduces young professionals to careers in the nuclear industry and international civil service, and provides the IAEA access to U.S. academic institutions. In 2003, the program will be expanded to include engineering and technical writing in support of the Division of Safeguards Technical Services. The paper will discuss the recruitment and selection of interns and the administration of the program

76 FR 54599 - Medicare Program; Medicare Advantage and Prescription Drug Benefit Programs

Science.gov (United States)

2011-09-01

...), prescription drug benefit program (Part D) and section 1876 cost plans including conforming changes to the MA... accounts (MSA) plans, cost-sharing for dual-eligible enrollees in the MA program and prescription drug pricing, coverage, and payment processes in the Part D program, and requirements governing the marketing...

Evaluating Effectiveness of Pair Programming as a Teaching Tool in Programming Courses

Science.gov (United States)

Faja, Silvana

2014-01-01

This study investigates the effectiveness of pair programming on student learning and satisfaction in introductory programming courses. Pair programming, used in the industry as a practice of an agile development method, can be adopted in classroom settings to encourage peer learning, increase students' social skills, and enhance student…

76 FR 39006 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program; Correction

Science.gov (United States)

2011-07-05

... and 480 [CMS-3239-CN] RIN 0938-AQ55 Medicare Program; Hospital Inpatient Value-Based Purchasing... Value-Based Purchasing Program.'' DATES: Effective Date: These corrections are effective on July 1, 2011... for the hospital value-based purchasing program. Therefore, in section III. 6. and 7. of this notice...

Tank Focus Area Pretreatment Program. FY 1995 Program Management Plan

International Nuclear Information System (INIS)

Morrison, M.I.; McGinnis, C.P.; Wilkenson, W.T.; Hunt, R.D.

1995-02-01

This program management plan (PMP) describes the FY 1995 project plans for the Pretreatment Program of the Tank Focus Area. The Tank Focus Area is one of five areas of environmental concerns originally identified by the Deputy Assistant Secretary for Technology Development (EM-50). Projects in the Tank Focus Area relate to the remediation of liquid waste stored in underground storage tanks at various US Department of Energy sites. The Pretreatment Program is an organizational unit performing work within the Tank Focus Area. The function of the Pretreatment Program is to develop, test, evaluate, and demonstrate new technologies, with emphasis on separations. The 11 Pretreatment Program projects for FY 1995 are (1) Cesium Extraction Testing, (2) Comprehensive Supernate Treatment, (3) Hot Cell Studies, (4) Cesium Removal Demonstration, (5) Out-of-Tank Evaporator Demonstration, (6) Crossflow Filtration, (7) Technical Interchange with CEA, (8) TRUEX Applications, (9) NAC/NAG Process Studies (conducted at Oak Ridge National Laboratory), (10) NAC/NAG Process and Waste Form Studies (conducted at Florida International University), and (11) Program Management. Section 2 of this PMP contains a separate subsection for each FY 1995 project. A brief description of the project, a schedule of major milestones, and a breakdown of costs are provided for each project. The PMP also contains sections that describe the project controls that are in place. Quality assurance, document control, the project management system, and the management organization are described in these sections

A cross-cultural mentoring program

Energy Technology Data Exchange (ETDEWEB)

Huang-Nissen, S.; Myers, R.Y.

1995-04-01

This report summarized the results of the pilot Cross-Cultural Mentoring Program at Lawrence Livermore National Laboratory, from the inception of the program idea through its implementation and assessment. It discusses the benefits of mentoring, the origins of the program, program design and implementation, program assessment, and conclusions and recommendations.

Integrating Professional Development into STEM Graduate Programs: Student-Centered Programs for Career Preparation

Science.gov (United States)

Lautz, L.; McCay, D.; Driscoll, C. T.; Glas, R. L.; Gutchess, K. M.; Johnson, A.; Millard, G.

2017-12-01

Recognizing that over half of STEM Ph.D. graduates are finding work outside of academia, a new, NSF-funded program at Syracuse University, EMPOWER (or Education Model Program on Water-Energy Research) is encouraging its graduate students to take ownership of their graduate program and design it to meet their anticipated needs. Launched in 2016, EMPOWER's goal is to prepare graduate students for careers in the water-energy field by offering targeted workshops, professional training coursework, a career capstone experience, a professional development mini-grant program, and an interdisciplinary "foundations" seminar. Through regular student feedback and program evaluation, EMPOWER has learned some important lessons this first year: career options and graduate students' interests are diverse, requiring individualized programs designed to meet the needs of prospective employers and employees; students need exposure to the range of careers in their field to provide a roadmap for designing their own graduate school experience; effective programs nurture a culture that values professional development thereby giving students permission to pursue career paths and professional development opportunities that meet their own needs and interests; and existing university resources support the effective and efficient integration of professional development activities into graduate programs. Many of the positive outcomes experienced by EMPOWER students may be achieved in departmental graduate programs with small changes to their graduate curricula.

Supervisor's role in training programs as a manager of learning program

Directory of Open Access Journals (Sweden)

2011-06-01

Full Text Available According to the training literature, a supervisor's role in training programs has two major elements: supervisor support and supervisor communication. The ability of supervisors to play effective roles in training programs may increase employees' motivation to learn. The nature of this relationship is interesting, but the role of supervisor's role as a predicting variable is less emphasized in a training program models. Therefore, this study was conducted to examine the effect of supervisor's role in training programs on motivation to learn using 152 usable questionnaires gathered from non-academic employees who have worked in a technological based public university, Malaysia. The outcomes of stepwise regression analysis showed that the supervisor support and supervisor communication significantly associated with motivation to learn. Statistically, this result demonstrates that supervisor's role in training programs does act as an important predictor of motivation to learn in the organizational sample. In addition, discussion, implication and conclusion are elaborated.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Accreditation Program for Breast Centers About NAPBC Accreditation Education NAPBC Standards Cancer Programs News Quality in Geriatric ... Continuous Certification Requirements SSR Login MIPS Resources and Education Quality and Safety Conference Trauma Trauma Programs Trauma ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Safety Resources About the Patient Education Program The Recovery Room Choosing Wisely Educational Programs Educational Programs Educational ... and practice the skills needed for optimal postoperative recovery. The kit supports the entire surgical team with ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... and Safety Inspiring Quality Initiative Resources Continuous Quality Improvement ACS Clinical Scholars in Residence AHRQ Safety Program ... Enrollment Webinars ACS NSQIP ACS National Surgical Quality Improvement Program ACS National Surgical Quality Improvement Program About ...

Ada Linear-Algebra Program

Science.gov (United States)

Klumpp, A. R.; Lawson, C. L.

1988-01-01

Routines provided for common scalar, vector, matrix, and quaternion operations. Computer program extends Ada programming language to include linear-algebra capabilities similar to HAS/S programming language. Designed for such avionics applications as software for Space Station.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Policy Updates Selected Research Findings Quality Program Initiatives Communications to the Profession Advocacy Advocacy Overview Quality Payment Program QPP Resource Center QPP Resource Center 2018 Information 2017 Information Program Rules Surgeon Specific Registry Metabolic ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Membership Directory 2017 Annual Meeting 2016 Annual Meeting Women's Committee Mentorship Program Outside Activities ACS Archives Contact ... Accreditation Program for Breast Centers About NAPBC Accreditation Education NAPBC Standards Cancer Programs News Quality in Geriatric ...

PNNL FY2005 DOE Voluntary Protection Program (VPP) Program Evaluation

Energy Technology Data Exchange (ETDEWEB)

Wright, Patrick A.; Madson, Vernon J.; Isern, Nancy G.; Haney, Janice M.; Fisher, Julie A.; Goheen, Steven C.; Gulley, Susan E.; Reck, John J.; Collins, Drue A.; Tinker, Mike R.; Walker, Landon A.; Wynn, Clifford L.

2005-01-31

This document reports the results of the FY 2005 PNNL VPP Program Evaluation, which is a self-assessment of the operational and programmatic performance of the Laboratory related to worker safety and health. The report was compiled by a team of worker representatives and safety professionals who evaluated the Laboratory's worker safety and health programs on the basis of DOE-VPP criteria. The principle elements of DOE's VPP program are: Management Leadership, Employee Involvement, Worksite Analysis, Hazard Prevention and Control, and Safety and Health Training.

Report of the Integrated Program Planning Activity for the DOE Fusion Energy Sciences Program

International Nuclear Information System (INIS)

None

2000-01-01

This report of the Integrated Program Planning Activity (IPPA) has been prepared in response to a recommendation by the Secretary of Energy Advisory Board that, ''Given the complex nature of the fusion effort, an integrated program planning process is an absolute necessity.'' We, therefore, undertook this activity in order to integrate the various elements of the program, to improve communication and performance accountability across the program, and to show the inter-connectedness and inter-dependency of the diverse parts of the national fusion energy sciences program. This report is based on the September 1999 Fusion Energy Sciences Advisory Committee's (FESAC) report ''Priorities and Balance within the Fusion Energy Sciences Program''. In its December 5,2000, letter to the Director of the Office of Science, the FESAC has reaffirmed the validity of the September 1999 report and stated that the IPPA presents a framework and process to guide the achievement of the 5-year goals listed in the 1999 report. The National Research Council's (NRC) Fusion Assessment Committee draft final report ''An Assessment of the Department of Energy's Office of Fusion Energy Sciences Program'', reviewing the quality of the science in the program, was made available after the IPPA report had been completed. The IPPA report is, nevertheless, consistent with the recommendations in the NRC report. In addition to program goals and the related 5-year, 10-year, and 15-year objectives, this report elaborates on the scientific issues associated with each of these objectives. The report also makes clear the relationships among the various program elements, and cites these relationships as the reason why integrated program planning is essential. In particular, while focusing on the science conducted by the program, the report addresses the important balances between the science and energy goals of the program, between the MFE and IFE approaches, and between the domestic and international aspects

Laboratory Cooperative Program: an assessment

International Nuclear Information System (INIS)

1979-11-01

The Laboratory Cooperative Program (Lab Coop Program) was initiated by the US AEC over 20 years ago to promote the transfer of technical information from the national laboratories to the academic community utilizing the facilities and staff capabilities of the labs. Under the AEC, ERDA and DOE, the goals of the program have broadened gradually. Therefore, the program was examined to determine the extent to which it contributes to the current objectives of the DOE and to develop recommendations for any program changes. The assessment of the Lab Coop Program was based on a combination of review of program activity data and publications, review of general information regarding laboratory operations, and extensive interviews. The major findings of this evaluation were that: the program lacks a clear statement of purpose; program plans, priorities, and procedures are not explicit and operations tend to follow historical patterns; and the program is generally accepted as beneficial, but its benefits are difficult to quantify. It is recommended that the focus of the Lab Coop Program be limited and clearly defined, that performance plans be developed and measured against accomplishments, and that a national informational effort be initiated

Developmental Programming of Renal Function and Re-Programming Approaches

Directory of Open Access Journals (Sweden)

Eva Nüsken

2018-02-01

Full Text Available Chronic kidney disease affects more than 10% of the population. Programming studies have examined the interrelationship between environmental factors in early life and differences in morbidity and mortality between individuals. A number of important principles has been identified, namely permanent structural modifications of organs and cells, long-lasting adjustments of endocrine regulatory circuits, as well as altered gene transcription. Risk factors include intrauterine deficiencies by disturbed placental function or maternal malnutrition, prematurity, intrauterine and postnatal stress, intrauterine and postnatal overnutrition, as well as dietary dysbalances in postnatal life. This mini-review discusses critical developmental periods and long-term sequelae of renal programming in humans and presents studies examining the underlying mechanisms as well as interventional approaches to “re-program” renal susceptibility toward disease. Clinical manifestations of programmed kidney disease include arterial hypertension, proteinuria, aggravation of inflammatory glomerular disease, and loss of kidney function. Nephron number, regulation of the renin–angiotensin–aldosterone system, renal sodium transport, vasomotor and endothelial function, myogenic response, and tubuloglomerular feedback have been identified as being vulnerable to environmental factors. Oxidative stress levels, metabolic pathways, including insulin, leptin, steroids, and arachidonic acid, DNA methylation, and histone configuration may be significantly altered by adverse environmental conditions. Studies on re-programming interventions focused on dietary or anti-oxidative approaches so far. Further studies that broaden our understanding of renal programming mechanisms are needed to ultimately develop preventive strategies. Targeted re-programming interventions in animal models focusing on known mechanisms will contribute to new concepts which finally will have to be translated

75 FR 48815 - Medicaid Program and Children's Health Insurance Program (CHIP); Revisions to the Medicaid...

Science.gov (United States)

2010-08-11

... Parts 431, 447, and 457 Medicaid Program and Children's Health Insurance Program (CHIP); Revisions to... 431, 447, and 457 [CMS-6150-F] RIN 0938-AP69 Medicaid Program and Children's Health Insurance Program... final rule implements provisions from the Children's Health Insurance Program Reauthorization Act of...

PROGRAMMING IS GOOD FOR CHILDREN? A CRITICAL VIEW ABOUT TEACHING PROGRAMMING IN SCHOOLS

Directory of Open Access Journals (Sweden)

Wendell Bento Geraldes

2014-12-01

Full Text Available This article presents reflections on teaching programming in schools and the positive and negative impact of this new methodology today. The study also discusses the initiatives relating to teaching programming in schools, considering also the opinion of experts on the subject. The following questions are addressed: Is it good for children to learn to program computers in schools? Can all people learn to program computers? What is the importance of learning for today's society? The pros and cons regarding teaching programming in schools will be discussed in search of answers to these questions.

Quality assurance program plan for the Reactor Research Experiment Programs (RREP)

International Nuclear Information System (INIS)

Pipher, D.G.

1982-05-01

This document describes the Quality Assurance Program plans which will be applied to tasks on Reactor Research Experiments performed on Sandia National Laboratories' reactors. The program provides for individual project or experiment quality plan development and allows for reasonable plan flexibility and maximum plan visibility. Various controls and requirements in this program plan are considered mandatory on all features which are identified as important to public health and safety (Level I). It is the intent of this document that the Quality Assurance program comprise those elements which will provide adequate assurance that all components, equipment, and systems of the experiments will perform as designed, and hence prevent delays and costs due to rejections or failures

Department of Energy hazardous waste remedial actions program: Quality assurance program

International Nuclear Information System (INIS)

Horne, T.E.

1988-01-01

This paper describes the Quality Assurance Program developed for the Hazardous Waste Remedial Actions Program Support Contractor Office (HAZWRAP SCO). Key topics discussed include an overview of the HAZWRAP SCO mission and organization, the basic quality assurance program requirements and the requirements for the control of quality for the Department of Energy and Work for Others hazardous waste management programs, and the role of ensuring quality through the project team concept for the management of remedial response actions. The paper focuses on planning for quality assurance for this remedial waste management process from preliminary assessments of remedial sites to feasibility studies. Some observations concerning the control of quality during the implementation of remedial actions are presented. (2 refs.)

Programming in biomolecular computation

DEFF Research Database (Denmark)

Hartmann, Lars Røeboe; Jones, Neil; Simonsen, Jakob Grue

2011-01-01

Our goal is to provide a top-down approach to biomolecular computation. In spite of widespread discussion about connections between biology and computation, one question seems notable by its absence: Where are the programs? We identify a number of common features in programming that seem...... conspicuously absent from the literature on biomolecular computing; to partially redress this absence, we introduce a model of computation that is evidently programmable, by programs reminiscent of low-level computer machine code; and at the same time biologically plausible: its functioning is defined...... by a single and relatively small set of chemical-like reaction rules. Further properties: the model is stored-program: programs are the same as data, so programs are not only executable, but are also compilable and interpretable. It is universal: all computable functions can be computed (in natural ways...

The art of multiprocessor programming

CERN Document Server

Herlihy, Maurice

2012-01-01

Revised and updated with improvements conceived in parallel programming courses, The Art of Multiprocessor Programming is an authoritative guide to multicore programming. It introduces a higher level set of software development skills than that needed for efficient single-core programming. This book provides comprehensive coverage of the new principles, algorithms, and tools necessary for effective multiprocessor programming. Students and professionals alike will benefit from thorough coverage of key multiprocessor programming issues. This revised edition incorporates much-demanded updates t

Energy research program 86

International Nuclear Information System (INIS)

1986-01-01

The energy research program 86 (EFP-86) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, EFP-84, and EFP-85. The new program is a continuation of the activities in the period 1986-88 with a total budget of 116 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Trauma Programs About Trauma Programs Violence Prevention BleedingControl.org Trauma Quality Programs National Trauma Data Bank Trauma ... 5000 (F) 312-202-5001 (E) postmaster@facs.org Copyright © 1996-2018 by the American College of ...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Quality and Safety Inspiring Quality Initiative Resources Continuous Quality Improvement ACS Clinical Scholars in Residence AHRQ Safety Program ... ISCR Enrollment Webinars ACS NSQIP ACS National Surgical Quality Improvement Program ACS National Surgical Quality Improvement Program About ...

Building Technologies Program Multi-Year Program Plan Research and Development 2008

Energy Technology Data Exchange (ETDEWEB)

None, None

2008-01-01

Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

Reactive Programming in Java

CERN Document Server

CERN. Geneva

2017-01-01

Reactive Programming in gaining a lot of excitement. Many libraries, tools, and frameworks are beginning to make use of reactive libraries. Besides, applications dealing with big data or high frequency data can benefit from this programming paradigm. Come to this presentation to learn about what reactive programming is, what kind of problems it solves, how it solves them. We will take an example oriented approach to learning the programming model and the abstraction.

Program Aplikasi Optimalisasi Perencanaan Produksi Dengan Metode Goal Programming (Kasus Cv. G

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2010-06-01

Full Text Available Indonesia today is still a State agrarian. Thus agriculture in Indonesia always get more attention by the government. Many government programs are rolled out to support the agricultural development of Indonesia, and one of them is the fertilizer subsidy to farmers Indonesia. Fertilizer itself is very useful to nourish the soil and provide vitamins to the plants, thus increasing the amount of production generated. Therefore it is necessary fertilizer for agriculture in Indonesia. CV. G company is one of the companies that produce fertilizer. Fertilizer produced by this company is an organic fertilizer and inorganic fertilizer. Problems faced by these companies are in planning the production of fertilizer produced. Companies want to optimize the amount of production of each fertilizer, maximize revenues, minimize production costs, and simultaneously optimize the working hours of employees. To meet these objectives, this research created program package using goal programming methods. Goal programming method can provide an effective solution / equilibrium toward the goals set, and the calculation will be assisted by using the Simplex method that has been modified. This method is an extension of linear programming, linear programming which can only solve problems with a single goal while the goal programming to solve problems with multiple objectives.

Doctoral Study Programs in Social Work at HBCUs: Origin and Program Development

Science.gov (United States)

Aubrey, Hal; Jordan, Tina; Stevenson, Andre P.; Boss-Victoria, Rena; Haynes, James; Estreet, Anthony; Smith, Jahmaine; Cameron, Elijah; Williams, Quotasze

2016-01-01

Fisk University began the genesis of HBCU graduate programs in 1880. During the next fifty years, several other HBCUs established graduate programs. That group included Lincoln, Howard, and Morgan State. However, only Lincoln University established a PhD program. The primary goal of this paper is to provide a historical perspective regarding the…

Using program impact pathways to understand and improve program delivery, utilization, and potential for impact of Helen Keller International's homestead food production program in Cambodia.

Science.gov (United States)

Olney, Deanna K; Vicheka, Sao; Kro, Meng; Chakriya, Chhom; Kroeun, Hou; Hoing, Ly Sok; Talukder, Aminzzaman; Quinn, Victoria; Iannotti, Lora; Becker, Elisabeth; Roopnaraine, Terry

2013-06-01

Evidence of the impact of homestead food production programs on nutrition outcomes such as anemia and growth is scant. In the absence of information on program impact pathways, it is difficult to understand why these programs, which have been successful in increasing intake of micronutrient-rich foods, have had such limited documented impact on nutrition outcomes. To conduct a process evaluation of Helen Keller International's (HKI's) homestead food production program in Cambodia to assess whether the program was operating as planned (in terms of design, delivery, and utilization) and to identify ways in which the program might need to be strengthened in order to increase its potential for impact. A program theory framework, which laid out the primary components along the hypothesized program impact pathways, was developed in collaboration with HKI and used to design the research. Semistructured interviews and focus group discussions with program beneficiaries (n = 36 and 12, respectively), nonbeneficiaries (n = 12), and program implementers (n = 17 and 2, respectively) and observations of key program delivery points, including health and nutrition training sessions (n = 6), village model farms (n = 6), and household gardens of beneficiaries (n = 36) and nonbeneficiaries (n = 12), were conducted to assess the delivery and utilization of the primary program components along the impact pathways. The majority of program components were being delivered and utilized as planned. However, challenges with some of the key components posited to improve outcomes such as anemia and growth were noted. Among these were a gap in the expected pathway from poultry production to increased intake of eggs and poultry meat, and some weaknesses in the delivery of the health and nutrition training sessions and related improvements in knowledge among the village health volunteers and beneficiaries. Although the program has been successful in delivering the majority of the program

Meteorological Monitoring Program

International Nuclear Information System (INIS)

Hancock, H.A. Jr.; Parker, M.J.; Addis, R.P.

1994-01-01

The purpose of this technical report is to provide a comprehensive, detailed overview of the meteorological monitoring program at the Savannah River Site (SRS) near Aiken, South Carolina. The principle function of the program is to provide current, accurate meteorological data as input for calculating the transport and diffusion of any unplanned release of an atmospheric pollutant. The report is recommended for meteorologists, technicians, or any personnel who require an in-depth understanding of the meteorological monitoring program

Meteorological Monitoring Program

Energy Technology Data Exchange (ETDEWEB)

Hancock, H.A. Jr. [ed.; Parker, M.J.; Addis, R.P.

1994-09-01

The purpose of this technical report is to provide a comprehensive, detailed overview of the meteorological monitoring program at the Savannah River Site (SRS) near Aiken, South Carolina. The principle function of the program is to provide current, accurate meteorological data as input for calculating the transport and diffusion of any unplanned release of an atmospheric pollutant. The report is recommended for meteorologists, technicians, or any personnel who require an in-depth understanding of the meteorological monitoring program.

Integer programming

CERN Document Server

Conforti, Michele; Zambelli, Giacomo

2014-01-01

This book is an elegant and rigorous presentation of integer programming, exposing the subject’s mathematical depth and broad applicability. Special attention is given to the theory behind the algorithms used in state-of-the-art solvers. An abundance of concrete examples and exercises of both theoretical and real-world interest explore the wide range of applications and ramifications of the theory. Each chapter is accompanied by an expertly informed guide to the literature and special topics, rounding out the reader’s understanding and serving as a gateway to deeper study. Key topics include: formulations polyhedral theory cutting planes decomposition enumeration semidefinite relaxations Written by renowned experts in integer programming and combinatorial optimization, Integer Programming is destined to become an essential text in the field.

Ecosystem Analysis Program

International Nuclear Information System (INIS)

Burgess, R.L.

1978-01-01

Progress is reported on the following research programs: analysis and modeling of ecosystems; EDFB/IBP data center; biome analysis studies; land/water interaction studies; and computer programs for development of models

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Ostomy Home Skills Program Ostomy Home Skills Program Adult Ostomy Pediatric Ostomy Programa de Destrezas para manejo Doméstico de Ostomía Ostomy Home Skills Program Adult Ostomy Pediatric Ostomy Programa de Destrezas para manejo ...

The 3-D diffusion program XYZ-MUGDI with data-analyzing program XYZFF

International Nuclear Information System (INIS)

Siewers, H.

1976-01-01

The XYZ-MUGDI program solves boudary value and eigenvalue problems for three-dimensional heterogeneous configurations in X, Y, Z-geometry for a maximum of four energy groups. The program XYZFF is a program for analyzing data; with it especially the average and maximum form factors for arbitrary coarse-meshed networks can be evaluated. (orig.) [de

25 CFR 170.804 - How is BIA's Road Maintenance Program related to the IRR Program?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How is BIA's Road Maintenance Program related to the IRR... WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.804 How is BIA's Road Maintenance Program related to the IRR Program? The following chart illustrates how BIA's Road Maintenance Program is...

A Qualitative Program Evaluation of a Structured Leadership Mentoring Program at a Large Aerospace Corporation

Science.gov (United States)

Teller, Romney P.

2011-01-01

The researcher utilized a qualitative approach to conduct a program evaluation of the organization where he is employed. The study intended to serve as a program evaluation for the structured in-house mentoring program at a large aerospace corporation (A-Corp). This program evaluation clarified areas in which the current mentoring program is…

The program success story: a valuable tool for program evaluation.

Science.gov (United States)

Lavinghouze, Rene; Price, Ann Webb; Smith, Kisha-Ann

2007-10-01

Success stories are evaluation tools that have been used by professionals across disciplines for quite some time. They are also proving to be useful in promoting health programs and their accomplishments. The increasing popularity of success stories is due to the innovative and effective way that they increase a program's visibility, while engaging potential participants, partners, and funders in public health efforts. From the community level to the federal level, program administrators are using success stories as vehicles for celebrating achievements, sharing challenges, and communicating lessons learned. Success stories are an effective means to move beyond the numbers and connect to readers-with a cause they can relate to and want to join. This article defines success stories and provides an overview of several types of story formats, how success stories can be systematically collected, and how they are used to communicate program success.

Programs, interfaces and components

NARCIS (Netherlands)

Bergstra, J.A.; Loots, M.E.

The jump instruction is considered essential for an adequate theoretical understanding of imperative sequential programming. Using atomic actions and tests as a basis we outline an algebra of programs, denoted PGA, which captures the crux of sequential programming. PGA provides an ontology for

Trends in Multicultural Programming.

Science.gov (United States)

Mylopoulos, Chryss

1985-01-01

Outlines basic principles and philosophy behind library multicultural programs and provides brief overview of development of such programs in Canadian libraries. Programing themes (cultural identity, contribution of ethnocultural groups to Canadian society, interpretation of multiculturalism as social policy) and suggestions for integrating…

HIV Programs for Sex Workers: Lessons and Challenges for Developing and Delivering Programs.

Science.gov (United States)

Wilson, David

2015-06-01

There is evidence that HIV prevention programs for sex workers, especially female sex workers, are cost-effective in several contexts, including many western countries, Thailand, India, the Democratic Republic of Congo, Kenya, and Zimbabwe. The evidence that sex worker HIV prevention programs work must not inspire complacency but rather a renewed effort to expand, intensify, and maximize their impact. The PLOS Collection "Focus on Delivery and Scale: Achieving HIV Impact with Sex Workers" highlights major challenges to scaling-up sex worker HIV prevention programs, noting the following: sex worker HIV prevention programs are insufficiently guided by understanding of epidemic transmission dynamics, situation analyses, and programmatic mapping; sex worker HIV and sexually transmitted infection services receive limited domestic financing in many countries; many sex worker HIV prevention programs are inadequately codified to ensure consistency and quality; and many sex worker HIV prevention programs have not evolved adequately to address informal sex workers, male and transgender sex workers, and mobile- and internet-based sex workers. Based on the wider collection of papers, this article presents three major clusters of recommendations: (i) HIV programs focused on sex workers should be prioritized, developed, and implemented based on robust evidence; (ii) national political will and increased funding are needed to increase coverage of effective sex worker HIV prevention programs in low and middle income countries; and (iii) comprehensive, integrated, and rapidly evolving HIV programs are needed to ensure equitable access to health services for individuals involved in all forms of sex work.

Photovoltaic systems. Program summary

Energy Technology Data Exchange (ETDEWEB)

None

1978-12-01

Each of the Department of Energy's Photovoltaic Systems Program projects funded and/or in existence during fiscal year 1978 (October 1, 1977 through September 30, 1978) are described. The project sheets list the contractor, principal investigator, and contract number and funding and summarize the programs and status. The program is divided into various elements: program assessment and integration, research and advanced development, technology development, system definition and development, system application experiments, and standards and performance criteria. (WHK)

Putting program evaluation into practice: enhancing the Girls Just Wanna Have Fun program.

Science.gov (United States)

Bean, Corliss N; Kendellen, Kelsey; Halsall, Tanya; Forneris, Tanya

2015-04-01

In recent years there has been a call for increased community physical activity and sport programs for female youth that are deliberately structured to foster positive developmental outcomes. In addition, researchers have recognized the need to empirically evaluate such programs to ensure that youth are provided with optimal opportunities to thrive. This study represents a utilization-focused evaluation of Girls Just Wanna Have Fun, a female-only physical activity-based life skills community program. A utilization-focused evaluation is particularly important when the evaluation is to help stakeholders utilize the findings in practice. The purpose of this study was twofold: (a) to gain an understanding of the ongoing successes and challenges after year two of program implementation and (b) to examine how the adaptations made based on feedback from the first year evaluation were perceived as impacting the program. From interviews with youth participants and program leaders, three main themes with eight sub-themes emerged. The main themes were: (a) applying lessons learned can make a significant difference, (b) continually implementing successful strategies, and (c) ongoing challenges. Overall, this evaluation represents an important step in understanding how to improve program delivery to better meet the needs of the participants in community-based programming. Copyright © 2014 Elsevier Ltd. All rights reserved.

A reliability program for emergency diesel generators at nuclear power plants: Program structure

International Nuclear Information System (INIS)

Lofgren, E.V.; DeMoss, G.M.; Fragola, J.R.; Appignani, P.L.; Delarche, G.; Boccio, J.

1988-04-01

The purpose of this report is to provide technical guidelines for NRC staff use in the development of positions for evaluating emergency diesel generator (EDG) reliability programs. Such reviews will likely result following resolution of USI A-44 and GSI B-56. The diesel generator reliability program is a management system for achieving and maintaining a selected (or target) level of reliability. This can be achieved by: (1) understanding the factors that control the EDG reliability and (2) then applying reliability and maintenance techniques in the proper proportion to achieve selected performance goals. The concepts and guidelines discussed in this report are concepts and approaches that have been successful in applications where high levels of reliability must be maintained. Both an EDG reliability program process and a set of review items for NRC use are provided. The review items represent a checklist for reviewing EDG reliability programs. They do not, in themselves, constitute a reliability program. Rather, the review items are those distinctive features of a reliability program that must be present for the program to be effective

Sprego Programming

Directory of Open Access Journals (Sweden)

Maria Csernoch

2015-02-01

Full Text Available Spreadsheet management is a border-land between office applications and programming, however, it is rather communicated that spreadsheet is nothing more than an easily handled fun piece. Consequently, the complexity of spreadsheet handling, the unprepared end-users, their problem solving abilities and approaches do not match. To overcome these problems we have developed and introduced Sprego (Spreadsheet Lego. Sprego is a simplified functional programming language in spreadsheet environment, and such as can be used both as introductory language and the language of end-user programmers. The essence of Sprego is that we use as few and simple functions as possible and based on these functions build multilevel formulas. With this approach, similar to high level programming, we are able solve advanced problems, developing algorithmic skills, computational thinking. The advantage of Sprego is the simplicity of the language, when the emphasis is not on the coding but on the problem. Beyond that spreadsheets would provide real life problems with authentic data and tables which students are more interested in than the artificial environment and semi-authentic problems of high level programming languages.

CUMBIN - CUMULATIVE BINOMIAL PROGRAMS

Science.gov (United States)

Bowerman, P. N.

1994-01-01

The cumulative binomial program, CUMBIN, is one of a set of three programs which calculate cumulative binomial probability distributions for arbitrary inputs. The three programs, CUMBIN, NEWTONP (NPO-17556), and CROSSER (NPO-17557), can be used independently of one another. CUMBIN can be used by statisticians and users of statistical procedures, test planners, designers, and numerical analysts. The program has been used for reliability/availability calculations. CUMBIN calculates the probability that a system of n components has at least k operating if the probability that any one operating is p and the components are independent. Equivalently, this is the reliability of a k-out-of-n system having independent components with common reliability p. CUMBIN can evaluate the incomplete beta distribution for two positive integer arguments. CUMBIN can also evaluate the cumulative F distribution and the negative binomial distribution, and can determine the sample size in a test design. CUMBIN is designed to work well with all integer values 0 < k <= n. To run the program, the user simply runs the executable version and inputs the information requested by the program. The program is not designed to weed out incorrect inputs, so the user must take care to make sure the inputs are correct. Once all input has been entered, the program calculates and lists the result. The CUMBIN program is written in C. It was developed on an IBM AT with a numeric co-processor using Microsoft C 5.0. Because the source code is written using standard C structures and functions, it should compile correctly with most C compilers. The program format is interactive. It has been implemented under DOS 3.2 and has a memory requirement of 26K. CUMBIN was developed in 1988.

Workplace Violence Training Programs for Health Care Workers: An Analysis of Program Elements.

Science.gov (United States)

Arbury, Sheila; Hodgson, Michael; Zankowski, Donna; Lipscomb, Jane

2017-06-01

Commercial workplace violence (WPV) prevention training programs differ in their approach to violence prevention and the content they present. This study reviews 12 such programs using criteria developed from training topics in the Occupational Safety and Health Administration's (OSHA) Guidelines for Preventing Workplace Violence for Healthcare and Social Service Workers and a review of the WPV literature. None of the training programs addressed all the review criteria. The most significant gap in content was the lack of attention to facility-specific risk assessment and policies. To fill this gap, health care facilities should supplement purchased training programs with specific training in organizational policies and procedures, emergency action plans, communication, facility risk assessment, and employee post-incident debriefing and monitoring. Critical to success is a dedicated program manager who understands risk assessment, facility clinical operations, and program management and evaluation.

Veterans Choice Program

Data.gov (United States)

Department of Veterans Affairs — If you are already enrolled in VA health care, the Choice Program allows you to receive health care within your community. Using this program does NOT impact your...

Functional Programming Using F#

DEFF Research Database (Denmark)

Hansen, Michael Reichhardt; Rischel, Hans

This comprehensive introduction to the principles of functional programming using F# shows how to apply basic theoretical concepts to produce succinct and elegant programs. It demonstrates the role of functional programming in a wide spectrum of applications including databases and systems....... Coverage also includes advanced features in the .NET library, the imperative features of F# and topics such as text processing, sequences, computation expressions and asynchronous computation. With a broad spectrum of examples and exercises, the book is perfect for courses in functional programming...... and for self-study. Enhancing its use as a text is an accompanying website with downloadable programs, lecture slides, a mini-projects and links to further F# sources....

76 FR 43571 - Small Business HUBZone Program; Government Contracting Programs

Science.gov (United States)

2011-07-21

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 126 RIN 3245-AG45 Small Business HUBZone Program; Government Contracting Programs AGENCY: U.S. Small Business Administration. ACTION: Interim final rule with request for comments. SUMMARY: This interim final rule amends the U.S. Small Business Administration's...

National Toxicology Program

Science.gov (United States)

... NTP? NTP develops and applies tools of modern toxicology and molecular biology to identify substances in the ... depend on for decisions that matter. The National Toxicology Program provides the scientific basis for programs, activities, ...

Mississippi Curriculum Framework for Welding and Cutting Programs (Program CIP: 48.0508--Welder/Welding Technologist). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the welding and cutting programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

The RERTR program

International Nuclear Information System (INIS)

Travelli, A.

1997-01-01

The Reduced Enrichment Research and Test Reactor (RERTR) Program was established in 1978 at the Argonne National Laboratory (ANL) by the Department of Energy (DOE), which continues to fund the program and to manage it in coordination with the Department of State (DOS), the Arms Control and Disarmament Agency (ACDA), and the Nuclear Regulatory Commission (NRC). The primary objective of the program is to develop the technology needed to use Low-Enrichment Uranium (LEU) instead of High-Enrichment Uranium (HEU) in research and test reactors, without significant penalties in experiment performance, economics, or safety. Eliminating the continuing need of HEU supplies for research and test reactors has long been an integral part of US nonproliferation policy. This paper reviews the main accomplishments of the program through the years

Relay test program

International Nuclear Information System (INIS)

Bandyopadhyay, K.K.; Kunkel, C.; Shteyngart, S.

1994-02-01

This report presents the results of a relay test program conducted by Brookhaven National Laboratory (BNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC). The program is a continuation of an earlier test program the results of which were published in NUREG/CR-4867. The current program was carried out in two phases: electrical testing and vibration testing. The objective was primarily to focus on the electrical discontinuity or continuity of relays and circuit breaker tripping mechanisms subjected to electrical pulses and vibration loads. The electrical testing was conducted by KEMA-Powertest Company and the vibration testing was performed at Wyle Laboratories, Huntsville, Alabama. This report discusses the test procedures, presents the test data, includes an analysis of the data and provides recommendations regarding reliable relay testing

Separable programming theory and methods

CERN Document Server

Stefanov, Stefan M

2001-01-01

In this book, the author considers separable programming and, in particular, one of its important cases - convex separable programming Some general results are presented, techniques of approximating the separable problem by linear programming and dynamic programming are considered Convex separable programs subject to inequality equality constraint(s) and bounds on variables are also studied and iterative algorithms of polynomial complexity are proposed As an application, these algorithms are used in the implementation of stochastic quasigradient methods to some separable stochastic programs Numerical approximation with respect to I1 and I4 norms, as a convex separable nonsmooth unconstrained minimization problem, is considered as well Audience Advanced undergraduate and graduate students, mathematical programming operations research specialists

Uranium-mill appraisal program

International Nuclear Information System (INIS)

Everett, R.J.; Cain, C.L.

1982-08-01

The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

Entrez Programming Utilities

Data.gov (United States)

U.S. Department of Health & Human Services — The Entrez Programming Utilities (E-utilities) are a set of eight server-side programs that provide a stable interface into the Entrez query and database system at...

Materials Sciences Programs

International Nuclear Information System (INIS)

1977-01-01

A compilation and index of the ERDA materials sciences program is presented. This compilation is intended for use by administrators, managers, and scientists to help coordinate research and as an aid in selecting new programs

Toy Control Program evaluation.

Science.gov (United States)

Stewart, H A; Ormond, C; Seeger, B R

1991-08-01

The Toy Control Program for the Apple IIe microcomputer is a software and hardware package developed for the training of single-switch scanning skills. The specially designed scanning programs provide on screen visual feedback and activate a battery-powered toy to reinforce performance. This study examined whether the training of preschool subjects in single-switch scanning skills with the Toy Control Program would result in increased task completion scores and increased levels of attention to task, as compared with conditions of toy activation only and microcomputer programs with screen reinforcement only. The results showed that the subjects paid significantly more attention to the toys as reinforcers (p less than .01). No significant difference was found for the performance results of the three conditions. These findings support the use of a program like the Toy Control Program, which integrates the instructional capabilities of a computer with the reinforcement potential of a toy and the creativity of a therapist.

Role of the consolidated fuel reprocessing program in the United States Breeder Reactor Program

International Nuclear Information System (INIS)

Ballard, W.W.; Burch, W.D.

1980-01-01

While present US policy precludes the commercial reprocessing of LWR fuels and the recycle of plutonium, the policy does encompass the need to continue a program to develop the technology for reprocessing breeder fuels. Some questions have again risen this year as to the pace of the entire breeder program, including recycle, and the answers are evolving. This paper and the other companion papers which describe several aspects of the Consolidated Fuel Reprocessing Program take a longer-range perspective on the total program. Whether the program is implemented in the general time frame described is dependent on future government actions dedicated to carrying out a systematic program that would permit breeders to be commercialized early in the next century

ALPS: A Linear Program Solver

Science.gov (United States)

Ferencz, Donald C.; Viterna, Larry A.

1991-01-01

ALPS is a computer program which can be used to solve general linear program (optimization) problems. ALPS was designed for those who have minimal linear programming (LP) knowledge and features a menu-driven scheme to guide the user through the process of creating and solving LP formulations. Once created, the problems can be edited and stored in standard DOS ASCII files to provide portability to various word processors or even other linear programming packages. Unlike many math-oriented LP solvers, ALPS contains an LP parser that reads through the LP formulation and reports several types of errors to the user. ALPS provides a large amount of solution data which is often useful in problem solving. In addition to pure linear programs, ALPS can solve for integer, mixed integer, and binary type problems. Pure linear programs are solved with the revised simplex method. Integer or mixed integer programs are solved initially with the revised simplex, and the completed using the branch-and-bound technique. Binary programs are solved with the method of implicit enumeration. This manual describes how to use ALPS to create, edit, and solve linear programming problems. Instructions for installing ALPS on a PC compatible computer are included in the appendices along with a general introduction to linear programming. A programmers guide is also included for assistance in modifying and maintaining the program.

Programming with Intervals

Science.gov (United States)

Matsakis, Nicholas D.; Gross, Thomas R.

Intervals are a new, higher-level primitive for parallel programming with which programmers directly construct the program schedule. Programs using intervals can be statically analyzed to ensure that they do not deadlock or contain data races. In this paper, we demonstrate the flexibility of intervals by showing how to use them to emulate common parallel control-flow constructs like barriers and signals, as well as higher-level patterns such as bounded-buffer producer-consumer. We have implemented intervals as a publicly available library for Java and Scala.

Heavy-Section Steel Technology Program

International Nuclear Information System (INIS)

Pennell, W.E.

1992-11-01

The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission (NRC) by Oak Ridge National Laboratory (ORNL). The program focus is on the development and validation of technology for the assessment of fracture-prevention margins in commercial nuclear reactor pressure vessels. The HSST Program is organized in 11 tasks: program management, fracture methodology and analysis, material characterization and properties, special technical assistance, fracture analysis computer programs, cleavage-crack initiation, cladding evaluations, pressurized-thermal-shock technology, analysis methods validation, fracture evaluation tests, and warm prestressing. The program tasks have been structured to place emphasis on the resolution fracture issues with near-term licensing significance. Resources to execute the research tasks are drawn from ORNL with subcontract support from universities and other research laboratories. Close contact is maintained with the sister Heavy-Section Steel Irradiation (HSSI) Program at ORNL and with related research programs both in the United States and abroad. This report provides an overview of principal developments in each of the II program tasks from October 1, 1991 to March 31, 1992

HIV Programs for Sex Workers: Lessons and Challenges for Developing and Delivering Programs.

Directory of Open Access Journals (Sweden)

David Wilson

2015-06-01

Full Text Available There is evidence that HIV prevention programs for sex workers, especially female sex workers, are cost-effective in several contexts, including many western countries, Thailand, India, the Democratic Republic of Congo, Kenya, and Zimbabwe. The evidence that sex worker HIV prevention programs work must not inspire complacency but rather a renewed effort to expand, intensify, and maximize their impact. The PLOS Collection "Focus on Delivery and Scale: Achieving HIV Impact with Sex Workers" highlights major challenges to scaling-up sex worker HIV prevention programs, noting the following: sex worker HIV prevention programs are insufficiently guided by understanding of epidemic transmission dynamics, situation analyses, and programmatic mapping; sex worker HIV and sexually transmitted infection services receive limited domestic financing in many countries; many sex worker HIV prevention programs are inadequately codified to ensure consistency and quality; and many sex worker HIV prevention programs have not evolved adequately to address informal sex workers, male and transgender sex workers, and mobile- and internet-based sex workers. Based on the wider collection of papers, this article presents three major clusters of recommendations: (i HIV programs focused on sex workers should be prioritized, developed, and implemented based on robust evidence; (ii national political will and increased funding are needed to increase coverage of effective sex worker HIV prevention programs in low and middle income countries; and (iii comprehensive, integrated, and rapidly evolving HIV programs are needed to ensure equitable access to health services for individuals involved in all forms of sex work.

How to Buy Training Programs.

Science.gov (United States)

Geber, Beverly

1989-01-01

Discusses how to select the best training program for your needs. Includes information on deciding whether to develop your own program or buy one; identifying the kind of program you need; examining what is available; networking; choosing a supplier; and evaluating programs. (JOW)

Maine's Employability Skills Program

Science.gov (United States)

McMahon, John M.; Wolffe, Karen E.; Wolfe, Judy; Brooker, Carrie

2013-01-01

This Practice Report describes the development and implementation of the "Maine Employability Skills Program," a model employment program developed by the Maine Division for the Blind and Visually Impaired (DBVI). The program was designed to support the efforts of the chronically unemployed or underemployed. These consumers were either…

DOE'S remedial action assurance program

International Nuclear Information System (INIS)

Welty, C.G. Jr.; Needels, T.S.; Denham, D.H.

1984-10-01

The formulation and initial implementation of DOE's Assurance Program for Remedial Action are described. It was initiated in FY 84 and is expected to be further implemented in FY 85 as the activities of DOE's Remedial Action programs continue to expand. Further APRA implementation will include additional document reviews, site inspections, and program office appraisals with emphasis on Uranium Mill Tailings Remedial Action Program and Surplus Facilities Management Program

Introduction to dynamic programming

CERN Document Server

Cooper, Leon; Rodin, E Y

1981-01-01

Introduction to Dynamic Programming provides information pertinent to the fundamental aspects of dynamic programming. This book considers problems that can be quantitatively formulated and deals with mathematical models of situations or phenomena that exists in the real world.Organized into 10 chapters, this book begins with an overview of the fundamental components of any mathematical optimization model. This text then presents the details of the application of dynamic programming to variational problems. Other chapters consider the application of dynamic programming to inventory theory, Mark

The Siemens graduate program

International Nuclear Information System (INIS)

Schaeffler, I.

2000-01-01

Siemens is an international company acting in different domains: power generation, communication and information, traffic, health, etc. To be more flexible and active in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in all the domains of activity. This graduate program is especially important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. This article presents the conditions to be accepted in this graduate program, and the supplementary training supporting this program. The Siemens graduate program (Sg) proposes a global concept with a main emphasis being international. (authors)

Scientific Programming in Fortran

Directory of Open Access Journals (Sweden)

W. Van Snyder

2007-01-01

Full Text Available The Fortran programming language was designed by John Backus and his colleagues at IBM to reduce the cost of programming scientific applications. IBM delivered the first compiler for its model 704 in 1957. IBM's competitors soon offered incompatible versions. ANSI (ASA at the time developed a standard, largely based on IBM's Fortran IV in 1966. Revisions of the standard were produced in 1977, 1990, 1995 and 2003. Development of a revision, scheduled for 2008, is under way. Unlike most other programming languages, Fortran is periodically revised to keep pace with developments in language and processor design, while revisions largely preserve compatibility with previous versions. Throughout, the focus on scientific programming, and especially on efficient generated programs, has been maintained.

Introduction to the Atari Computer. A Program Written in the Pilot Programming Language.

Science.gov (United States)

Schlenker, Richard M.

Designed to be an introduction to the Atari microcomputers for beginners, the interactive computer program listed in this document is written in the Pilot programing language. Instructions are given for entering and storing the program in the computer memory for use by students. (MES)

PROGRAM RISET ILMIAH IMRE LAKATOS

Directory of Open Access Journals (Sweden)

Rizal Mustansyir

2017-03-01

Full Text Available The topic of this paper is related to the methodological thought of a philosopher Imre Lacatos. The methodological problem is a core problem in the area of philosophy of science. Science philosopher’s discourse shows the methodology of science as one of the scientific procedures in gaining the truth, but in fact, it caused the emergence of methodological mainstream; mono-methodology and pluri-methodology. Imre Lacatos’ tried to mediate the discourse of two fortifications by means of scientific research program. Some ideas developed by Lacatos’ in its relation to the scientific research programs are; first, Lacatos propose a sum of mathematics knowledge which is based on the heuristics idea, second, Lacatos’ criticism to Popper’s falsifiable concept, third, Lacatos’ effort in looking for a harmonious method that provides a sum of rational scientific progress, appropriately keeps its consistency with the historical fact, fourth, Lacatos’ connect the research program to scientists who protect the core of theory from falsification effort, fifth, a research program is qualified as progressive if it is signed by stunning novel facts and as deteriorative if the program is not directed to the new fact, sixth, the hard-core is determining characteristic of program, it is a general theory of hypotheses which is employed as a foundation of developed program, seventh, the negative heuristic of hard-core program is detailed program which states the basic assumption of program, eighth, the positive heuristic of hard-core program is an outline which indicates how the research program can be developed under additional assumption of new phenomenon clarification.

Honolulu Community College Program Health Indicators: 2000-2001 Program Reviews.

Science.gov (United States)

Hawaii Univ., Honolulu. Honolulu Community Coll.

This report presents an overall health summation of 21 programs offered at Honolulu Community College (Hawaii) during 2000-2001. The programs profiled are: (1) Auto Body Repair and Painting; (2) Aeronautics Maintenance Technology; (3) Administration of Justice; (4) Automotive Mechanics Technology; (5) Boat Maintenance Repair; (6) Carpentry; (7)…

Sprego programming

OpenAIRE

Csernoch, Mária; Biró, Piroska

2015-01-01

Spreadsheet management is a border-land between office applications and programming, however, it is rather communicated that spreadsheet is nothing more than an easily handled fun piece. Consequently, the complexity of spreadsheet handling, the unprepared end-users, their problem solving abilities and approaches do not match. To overcome these problems we have developed and introduced Sprego (Spreadsheet Lego). Sprego is a simplified functional programming language in spreadsheet environment,...

Moderator Chemistry Program

International Nuclear Information System (INIS)

Dewitt, L.V.; Gibbs, A.; Lambert, D.P.; Bohrer, S.R.; Fanning, R.L.; Houston, M.W.; Stinson, S.L.; Deible, R.W.; Abdel-Khalik, S.I.

1990-11-01

Over the past fifteen months, the Systems Chemistry Group of the Reactor Engineering Department has undertaken a comprehensive study of the Department's moderator chemistry program at Savannah River Site (SRS). An internal review was developed to formalize and document this program. Objectives were as outlined in a mission statement and action plan. In addition to the mission statement and action plan, nine separate task reports have been issued during the course of this study. Each of these task reports is included in this document as a chapter. This document is an organized compilation of the individual reports issued by the Systems Chemistry Group in assessment of SRS moderator chemistry to determine if there were significant gaps in the program as ft existed in October, 1989. While these reviews found no significant gaps in that mode of operation, or any items that adversely affected safety, items were identified that could be improved. Many of the items have already been dear with or are in the process of completion under this Moderator Chemistry Program and other Reactor Restart programs. A complete list of the items of improvement found under this assessment is found in Chapter 9, along with a proposed time table for correcting remaining items that can be improved for the chemistry program of SRS reactors. An additional external review of the moderator chemistry processes, recommendations, and responses to/from the Reactor Corrosion Mitigation Committee is included as Appendix to this compilation

Quality Assurance Program Plan for TRUPACT-II Gas Generation Test Program

International Nuclear Information System (INIS)

2002-01-01

The Gas Generation Test Program (GGTP), referred to as the Program, is designed to establish the concentration of flammable gases and/or gas generation rates in a test category waste container intended for shipment in the Transuranic Package Transporter-II (TRUPACT-II). The phrase 'gas generationtesting' shall refer to any activity that establishes the flammable gas concentration or the flammable gas generation rate. This includes, but is not limited to, measurements performed directly on waste containers or during tests performed on waste containers. This Quality Assurance Program Plan (QAPP) documents the quality assurance (QA) and quality control (QC) requirements that apply to the Program. The TRUPACT-II requirements and technical bases for allowable flammable gas concentration and gas generation rates are described in the TRUPACT-II Authorized Methods for Payload Control (TRAMPAC).

NREL's Education Center Programs | NREL

Science.gov (United States)

NREL's Education Center Programs NREL's Education Center Programs There are a variety of educational programs offered through NREL's education center to inspire our community to explore the science neighbors, campus and trail maps, and more. A photo of the NREL Education Center exterior. Programs for

Programming Language Paradigms

OpenAIRE

Felician ALECU

2013-01-01

This paper's goal is to briefly explain the basic theory behind programming languages and their history while taking a close look at different programming paradigms that are used today as well as describing their differences, benefits, and drawbacks

Landlord Program multi-year program plan fiscal year 1995 WBS 7.5

International Nuclear Information System (INIS)

Young, C.L.

1994-01-01

The Landlord Program mission is to maintain, preserve, or upgrade the strategic assets of the Hanford Site to meet the overall cleanup mission. This encompasses innovative, appropriate, and cost effective general purpose infrastructure support, services, and long range strategic site planning that is the foundation for seven major Hanford programs. These programs are (1) Environmental Restoration, (2) Tank Waste Remediation System, (3) Solid/Liquid Waste Decontamination, (4) Facility Transition, (5) Spent Fuel, (6) Technology Development, and (7) the Multi-Program Laboratory. General infrastructure support consists of facilities, systems, and equipment that by design or use are not essentially dedicated to a single program mission. Facilities include laboratories, shops, warehouses, and general work space. Systems include electrical, process sewers, rail, roads, telecommunications, water, fire and emergency response, and steam supply and distribution. Funding also supports capital equipment critical to maintaining, upgrading, or operating the general infrastructure. Paramount to these objectives is compliance with all applicable laws, orders, agreements, codes, standards, best management and safety practices. The objectives for general infrastructure support are reflected in five programmatic functions, (1) Program Integration, (2) Capital Equipment, (3) Expense Funded Projects, (4) General Plant Projects, and (5) Line Items

Re-Imagining Program Development and Re-Engineering Program Design.

Science.gov (United States)

Currie, Geoffrey M; Thomas, Catherine J

2018-05-03

Program development and review is a central part of institutional and industry quality assurance. Traditional approaches, while well established, present a number of barriers that could undermine process integrity and quality outcomes. Here a new approach to program development and design is explored with the goal of enhancing outcomes for students and institutions. Copyright © 2018 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

The CRAFT Fortran Programming Model

Directory of Open Access Journals (Sweden)

Douglas M. Pase

1994-01-01

Full Text Available Many programming models for massively parallel machines exist, and each has its advantages and disadvantages. In this article we present a programming model that combines features from other programming models that (1 can be efficiently implemented on present and future Cray Research massively parallel processor (MPP systems and (2 are useful in constructing highly parallel programs. The model supports several styles of programming: message-passing, data parallel, global address (shared data, and work-sharing. These styles may be combined within the same program. The model includes features that allow a user to define a program in terms of the behavior of the system as a whole, where the behavior of individual tasks is implicit from this systemic definition. (In general, features marked as shared are designed to support this perspective. It also supports an opposite perspective, where a program may be defined in terms of the behaviors of individual tasks, and a program is implicitly the sum of the behaviors of all tasks. (Features marked as private are designed to support this perspective. Users can exploit any combination of either set of features without ambiguity and thus are free to define a program from whatever perspective is most appropriate to the problem at hand.

Java Programming Language

Science.gov (United States)

Shaykhian, Gholam Ali

2007-01-01

The Java seminar covers the fundamentals of Java programming language. No prior programming experience is required for participation in the seminar. The first part of the seminar covers introductory concepts in Java programming including data types (integer, character, ..), operators, functions and constants, casts, input, output, control flow, scope, conditional statements, and arrays. Furthermore, introduction to Object-Oriented programming in Java, relationships between classes, using packages, constructors, private data and methods, final instance fields, static fields and methods, and overloading are explained. The second part of the seminar covers extending classes, inheritance hierarchies, polymorphism, dynamic binding, abstract classes, protected access. The seminar conclude by introducing interfaces, properties of interfaces, interfaces and abstract classes, interfaces and cailbacks, basics of event handling, user interface components with swing, applet basics, converting applications to applets, the applet HTML tags and attributes, exceptions and debugging.

Quality Management Program

International Nuclear Information System (INIS)

1991-10-01

According to section 35.32, ''Quality Management Program,'' of 10 CFR Part 35, ''Medical Use of Byproduct Material,'' applicants or licensees, as applicable, are required to establish a quality management (QM) program. This regulatory guide provides guidance to licensees and applicants for developing policies and procedures for the QM program. This guide does not restrict or limit the licensee from using other guidance that may be equally useful in developing a QM program, e.g., information available from the Joint Commission on Accreditation of Healthcare Organizations or the American College of Radiology. Any information collection activities mentioned in this regulatory guide are contained as requirements in 10 CFR Part 35, which provides the regulatory basis for this guide. This information collection requirements in 10 CFR Part 35 have been cleared under OMB Clearance No. 3150-0010

An Interdistrict Transfer Program

Science.gov (United States)

Gross, Norman

1975-01-01

This testimony, before the May 1974 public hearings of the New York City Commission on Human Rights by the Administrator, Urban-Suburban Transfer Program and Inter district Transfer Program, West Irondequoit School District, New York, reviews a program which began with 25 minority group youngsters from one racially-imbalanced Rochester school…

Program Management System manual

International Nuclear Information System (INIS)

1986-01-01

The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

Calculation of cosmic ray induced single event upsets: Program CRUP (Cosmic Ray Upset Program)

Science.gov (United States)

Shapiro, P.

1983-09-01

This report documents PROGRAM CRUP, COSMIC RAY UPSET PROGRAM. The computer program calculates cosmic ray induced single-event error rates in microelectronic circuits exposed to several representative cosmic-ray environments.

New atmospheric program

Science.gov (United States)

The National Science Foundation's Division of Atmospheric Sciences has established an Upper Atmospheric Facilities program within its Centers and Facilities section. The program will support the operation of and the scientific research that uses the longitudinal chain of incoherent scatter radars. The program also will ensure that the chain is maintained as a state-of-the-art research tool available to all interested and qualified scientists.For additional information, contact Richard A. Behnke, Division of Atmospheric Sciences, National Science Foundation, 1800 G Street, N.W., Washington, DC 20550 (telephone: 202-357-7390).

Beginning Swift programming

CERN Document Server

Lee, Wei-Meng

2014-01-01

Enter the Swift future of iOS and OS X programming Beginning Swift Programming is your ideal starting point for creating Mac, iPhone, and iPad apps using Apple's new Swift programming language. Written by an experienced Apple developer and trainer, this comprehensive guide explains everything you need to know to jumpstart the creation of your app idea. Coverage includes data types, strings and characters, operators and functions, arrays and dictionaries, control flow, and looping, with expert guidance on classes, objects, class inheritance, closures, protocols, and generics. This succinct - ye

MLF user program

International Nuclear Information System (INIS)

Kamiyama, Takashi; Ikeda, Yujiro

2008-01-01

The user program of J-PARC/MLF is overviewed. Since MLF will be one of the major neutron facilities in the world, an international standard system for the user program is expected. It is also expected to establish a system to promote users from industries. The MLF user program is based on the IUPAP recommendation on the selection of proposals. Both open and closed accesses, biannual, regular, rapid accesses, etc. will be provided. All the features in the system are being introduced to maximize both scientific and engineering outputs from MLF. (author)

Ezhil: A Tamil Programming Language

OpenAIRE

Annamalai, Muthiah

2009-01-01

Ezhil is a Tamil language based interpreted procedural programming language. Tamil keywords and grammar are chosen to make the native Tamil speaker write programs in the Ezhil system. Ezhil allows easy representation of computer program closer to the Tamil language logical constructs equivalent to the conditional, branch and loop statements in modern English based programming languages. Ezhil is a compact programming language aimed towards Tamil speaking novice computer users. Grammar for Ezh...

Differential Programming Needs of College Students Preferring Web-Based Versus In-Person Physical Activity Programs.

Science.gov (United States)

Goldstein, Stephanie P; Forman, Evan M; Butryn, Meghan L; Herbert, James D

2017-09-21

College students report several barriers to exercise, highlighting a need for university-based programs that address these challenges. In contrast to in-person interventions, several web-based programs have been developed to enhance program engagement by increasing ease of access and lowering the necessary level of commitment to participate. Unfortunately, web-based programs continue to struggle with engagement and less-than-ideal outcomes. One explanation for this discrepancy is that different intervention modalities may attract students with distinctive activity patterns, motivators, barriers, and program needs. However, no studies have formally evaluated intervention modality preference (e.g., web-based or in-person) among college students. The current study sought to examine the relationship between intervention modality preference and physical activity programming needs. Undergraduate students (n = 157) enrolled in psychology courses at an urban university were asked to complete an online survey regarding current activity patterns and physical activity program preferences. Participants preferring web-based physical activity programs exercised less (p = .05), were less confident in their abilities to exercise (p = .01), were less likely to endorse the maintenance stage of change (p web-based programming may require programs that enhance self-efficacy by fostering goal-setting and problem-solving skills. A user-centered design approach may enhance the engagement (and therefore effectiveness) of physical activity promotion programs for college students.

STEM Education Programs

Science.gov (United States)

& Development (LDRD) National Security Education Center (NSEC) Office of Science Programs Richard P Databases National Security Education Center (NSEC) Center for Nonlinear Studies Engineering Institute Scholarships STEM Education Programs Teachers (K-12) Students (K-12) Higher Education Regional Education

77 FR 59931 - Single Source Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program...

Science.gov (United States)

2012-10-01

... Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program Grantee; Exception to... Competition--Single Source Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program... supplement award to the University of Guam School of Nursing, an Area Health Education Center (AHEC) Program...

Energy research program 80

International Nuclear Information System (INIS)

1980-01-01

The energy research program 80 contains an extension of the activities for the period 1980-82 within a budget of 100 mio.kr., that are a part of the goverment's employment plan for 1980. The research program is based on a number of project proposals, that have been collected, analysed, and supplemented in October-November 1979. This report consists of two parts. Part 1: a survey of the program, with a brief description of the background, principles, organization and financing. Part 2: Detailed description of the different research programs. (LN)

Development of object oriented program `SONSHO` for strength evaluation. Manual of Version 4.0 program

Energy Technology Data Exchange (ETDEWEB)

Hosogai, Hiromi [Joyo Industries Co. Ltd., Tokai, Ibaraki (Japan); Kasahara, Naoto

1998-07-01

Object Oriented Program `SONSHO` predicts creep fatigue damage factors based on Elevated Temperature Structural Design Guide for `Monju` and other various procedures from stress classification data obtained from structural analysis results. From view point of program implementation, it is required that external programs interface and frequent revise from update of material and creep fatigue evaluation methods. Object oriented approach was continuously introduced to improve these aspects of the program. Version 4.0 has the following new functions. (1) Material strength library was implemented as an independent program module based on Microsoft Active X control and 32bitDLL technologies, which can be accessed by general Windows programs. (2) Self instruction system `Wizard` enables manual less operation. (3) Microsoft common object model (COM) was adopted for program interface, and this program can communicate with Excel sheet data on memory. Sonsho Ver.4.0 can work on Windows 95 or Windows NT4.0. Microsoft Visual Basic 5.0 (Enterprose Edition) and Microsoft FORTRAN Power Station 4.0 were adopted for program. (author)

Quality assurance program preparation - review of requirements and plant systems - selection of program levels

International Nuclear Information System (INIS)

Asmuss, G.

1980-01-01

The establishment and implementation for a practicable quality assurance program for a nuclear power plant demands a detailed background in the field of engineering, manufacturing, organization and quality assurance. It will be demonstrated with examples to define and control the achievement of quality related activities during the phases of design, procurement, manufactoring, commissioning and operation. In general the quality assurance program applies to all items, processes and services important to safety of nuclear power plant. The classification for safety related and non-safety related items and services demonstrate the levels of quality assurance requirements. The lecture gives an introduction of QA Program preparation under the following topics: -Basic criteria and international requirements - Interaction of QA activities - Modular and product oriented QA programs - Structuring of organization for the QA program - Identification of the main quality assurance functions and required actions - Quality Assurance Program documentation - Documentation of planning of activities - Control of program documents - Definitions. (orig./RW)

GateWay Community College Water Resources Program Partnerships: An Opportunity for Program Success and Collaboration

Science.gov (United States)

Castaneda, M.

2012-12-01

GateWay Community College Water Resources Technologies (WRT) Program offers Certificate of Completions and Associate Degrees on Hydrologic Studies, Water Treatment and Wastewater Treatment. The program has been in existence since 1998 and has gone through several updates to meet the demand for professionals in those areas. The program includes theoretical and practical hands-on training in the monitoring of water quality and quantity as well as in water and industrial wastewater treatment. The WRT program offers online, face-to-face, and hybrid courses to address different student's needs for training. The program only Full-time faculty is supported by 15 adjunct- faculty professionals. Adjunct faculty is usually hired from a wide variety of professional people already working in the industry that have shown interest on teaching. Adjunct faculty also provide free tutoring to the WRT students when they are not teaching courses. The college Learning Center provides funding to support these tutoring activities. The program has an active Advisory Committee that provides guidance and recommends program changes to meet their training needs. This Advisory Committee is made of professionals from different federal, state, county agencies, and municipalities, private industry and consulting companies in the area. The Advisory Committee meets every year to provide feedback to GateWay on curriculum changes and commit to potential internship opportunities for the WRT students. Those internships (or voluntary work) are paid directly by the municipalities or agencies or can be paid by the GateWay WRT program. These internship jobs provides with an opportunity to actively promote the WRT program throughout the valley. The GateWay WRT program considers the Advisory Committee an essential component for the program success: the committee supports the program in recommending and acquiring the latest field equipment needed for the hands-on training. One of the main WRT program

Mitigation measures and programs in Hungary

Energy Technology Data Exchange (ETDEWEB)

Molnar, S. [Systemexpert Consulting Ltd., Budapest (Hungary)

1996-12-31

In Hungary there are four main governmental programs, which may result in a decrease of emissions of anthropogenic greenhouse gases (GHGs): (1) National program of energy efficiency improvement and energy conservation, (2) Afforestation program, (3) Volatile organic compounds (VOC) emission reduction program, and (4) Program to reduce the use of ozone depleting substances. These ambitious programs were launched in the beginning of the 90`s, but they have been slowed down because of budgetary problems. The comprehensive action plan for mitigation of GHG emissions should be based on these ongoing programs. These programs should be expanded by further measures and programs in order to fulfill the requirements of the FCCC. In the next sections the results and prospects of the above mentioned programs will be summarized. Also the results of the mitigation study supported by the U.S. Country Studies Program are included.

Programming the BBC micro

CERN Document Server

Ferguson, John D; Macari, Louie; Williams, Peter H

1983-01-01

Programming the BBC Micro is a 12-chapter book that begins with a description of the BBC microcomputer, its peripheral, and faults. Subsequent chapters focus on practice in programming, program development, graphics, words, numbers, sound, bits, bytes, and assembly language. The interfacing, file handling, and detailed description of BBC microcomputer are also shown.

Programming Language Paradigms

Directory of Open Access Journals (Sweden)

Bartoníček Jan

2014-01-01

Full Text Available This paper's goal is to briefly explain the basic theory behind programming languages and their history while taking a close look at different programming paradigms that are used today as well as describing their differences, benefits, and drawbacks

STREAM: A First Programming Process

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Kölling, Michael

2009-01-01

to derive a programming process, STREAM, designed specifically for novices. STREAM is a carefully down-scaled version of a full and rich agile software engineering process particularly suited for novices learning object-oriented programming. In using it we hope to achieve two things: to help novice......Programming is recognized as one of seven grand challenges in computing education. Decades of research have shown that the major problems novices experience are composition-based—they may know what the individual programming language constructs are, but they do not know how to put them together....... Despite this fact, textbooks, educational practice, and programming education research hardly address the issue of teaching the skills needed for systematic development of programs. We provide a conceptual framework for incremental program development, called Stepwise Improvement, which unifies best...

Integrated predictive maintenance program vibration and lube oil analysis: Part I - history and the vibration program

Energy Technology Data Exchange (ETDEWEB)

Maxwell, H.

1996-12-01

This paper is the first of two papers which describe the Predictive Maintenance Program for rotating machines at the Palo Verde Nuclear Generating Station. The organization has recently been restructured and significant benefits have been realized by the interaction, or {open_quotes}synergy{close_quotes} between the Vibration Program and the Lube Oil Analysis Program. This paper starts with the oldest part of the program - the Vibration Program and discusses the evolution of the program to its current state. The {open_quotes}Vibration{close_quotes} view of the combined program is then presented.

Integrated predictive maintenance program vibration and lube oil analysis: Part I - history and the vibration program

International Nuclear Information System (INIS)

Maxwell, H.

1996-01-01

This paper is the first of two papers which describe the Predictive Maintenance Program for rotating machines at the Palo Verde Nuclear Generating Station. The organization has recently been restructured and significant benefits have been realized by the interaction, or open-quotes synergyclose quotes between the Vibration Program and the Lube Oil Analysis Program. This paper starts with the oldest part of the program - the Vibration Program and discusses the evolution of the program to its current state. The open-quotes Vibrationclose quotes view of the combined program is then presented

Program evaluation: Weatherization Residential Assistance Partnership (WRAP) Program. Volume 1, Final report

Energy Technology Data Exchange (ETDEWEB)

1991-12-01

The Connecticut low income weatherization program was developed in response to a 1987 rate docket order from the Connecticut Department of Public Utility Control (DPUC) to Connecticut Light & Power Co., an operating subsidiary of Northeast Utilities (NU). (Throughout this report, NU is referred to as the operator of the program.) This program, known as the Weatherization Residential Assistance Partnership, or WRAP, was configured utilizing input from a collaborative group of interested parties to the docket. It was agreed that this program would be put forth by the electric utility, but would not ignore oil and gas savings (thus, it was to be ``fuel- blind``). The allocated cost of conservation services for each fuel source, however, should be cost effective. It was to be offered to those utility customers at or below 200 percent of the federal poverty levels, and provide a wide array of energy saving measures directed toward heating, water heating and lighting. It was felt by the collaborative group that this program would raise the level of expenditures per participant for weatherization services provided by the state, and by linking to and revising the auditing process for weatherization, would lower the audit unit cost. The program plans ranged from the offering of low-cost heating, water heating and infiltration measures, increased insulation levels, carpentry and plumbing services, to furnace or burner replacement. The program was configured to allow for very comprehensive weatherization and heating system servicing.

Laser program annual report, 1979

International Nuclear Information System (INIS)

Coleman, L.W.; Strack, J.R.

1980-03-01

This volume provides a program overview, presenting highlights of the technical accomplishments of the elements of the program, as well as discussions of program resources and facilities. Also covered are the work of the Solid-State Laser program element, which includes systems operations, Nova, and research and development activities

University Programs of the U.S. Department of Energy Advanced Accelerator Applications Program

International Nuclear Information System (INIS)

Beller, Denis E.; Ward, Thomas E.; Bresee, James C.

2002-01-01

The Advanced Accelerator Applications (AAA) Program was initiated in fiscal year 2001 (FY-01) by the U.S. Congress, the U.S. Department of Energy (DOE), and the Los Alamos National Laboratory (LANL) in partnership with other national laboratories. The primary goal of this program is to investigate the feasibility of transmutation of nuclear waste. An Accelerator-Driven Test Facility (ADTF), which may be built during the first decade of the 21. Century, is a major component of this effort. The ADTF would include a large, state-of-the-art charged-particle accelerator, proton-neutron target systems, and accelerator-driven R and D systems. This new facility and its underlying science and technology will require a large cadre of educated scientists and trained technicians. In addition, other applications of nuclear science and engineering (e.g., proliferation monitoring and defense, nuclear medicine, safety regulation, industrial processes, and many others) require increased academic and national infrastructure and student populations. Thus, the AAA Program Office has begun a multi-year program to involve university faculty and students in various phases of the Project to support the infrastructure requirements of nuclear energy, science and technology fields as well as the special needs of the DOE transmutation program. In this paper we describe university programs that have supported, are supporting, and will support the R and D necessary for the AAA Project. Previous work included research for the Accelerator Transmutation of Waste (ATW) project, current (FY-01) programs include graduate fellowships and research for the AAA Project, and it is expected that future programs will expand and add to the existing programs. (authors)

Strengthening Chronic Disease Prevention Programming: the Toward Evidence-Informed Practice (TEIP) Program Assessment Tool

Science.gov (United States)

Albert, Dayna; Fortin, Rebecca; Lessio, Anne; Herrera, Christine; Hanning, Rhona; Rush, Brian

2013-01-01

Best practices identified solely on the strength of research evidence may not be entirely relevant or practical for use in community-based public health and the practice of chronic disease prevention. Aiming to bridge the gap between best practices literature and local knowledge and expertise, the Ontario Public Health Association, through the Toward Evidence-Informed Practice initiative, developed a set of resources to strengthen evidence-informed decision making in chronic disease prevention programs. A Program Assessment Tool, described in this article, emphasizes better processes by incorporating review criteria into the program planning and implementation process. In a companion paper, “Strengthening Chronic Disease Prevention Programming: The Toward Evidence-Informed Practice (TEIP) Program Evidence Tool,” we describe another tool, which emphasizes better evidence by providing guidelines and worksheets to identify, synthesize, and incorporate evidence from a range of sources (eg, peer-reviewed literature, gray literature, local expertise) to strengthen local programs. The Program Assessment Tool uses 19 criteria derived from literature on best and promising practices to assess and strengthen program planning and implementation. We describe the benefits, strengths, and challenges in implementing the tool in 22 community-based chronic disease prevention projects in Ontario, Canada. The Program Assessment Tool helps put best processes into operation to complement adoption and adaptation of evidence-informed practices for chronic disease prevention. PMID:23721789

Fiscal year 1987 program plan

International Nuclear Information System (INIS)

1986-12-01

The Defense TRU Waste Program (DTWP) is the focal point for the Department of Energy in national planning, integration, operation, and technical development for TRU waste management. The scope of this program extends from the point of TRU waste generation through delivery to a permanent repository. The TRU program maintains a close interface with repository development to ensure program compatibility and coordination. The defense TRU program does not directly address commercial activities that generate TRU waste. Instead, it is concerned with providing alternatives to manage existing and future defense TRU wastes. The FY 87 Program Plan is consistent with the Defense TRU Waste Program goals and objectives stated in the Defense Transuranic Waste Program Strategy Document, January 1984. The roles of participants, the responsibilities and authorities for Operations, and Research ampersand Development (R ampersand D), the organizational interfaces and communication channels for R ampersand D and the establishment of procedures for planning, reporting, and budgeting of Operations and R ampersand D activities meet requirements stated in the Technical Management Plan for the Transuranic Waste Management Program. Detailed budget planning (i.e., programmatic funding and capital equipment) is presented for FY 87; outyear budget projections are presented for future years

Pollution prevention program implementation plan

International Nuclear Information System (INIS)

Engel, J.A.

1996-09-01

The Pollution Prevention Program Implementation Plan (the Plan) describes the Pacific Northwest National Laboratory's (PNNL) Pollution Prevention (P2) Program. The Plan also shows how the P2 Program at PNNL will be in support of and in compliance with the Hanford Site Waste Minimization and Pollution Prevention (WMin/P2) Awareness Program Plan and the Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation. In addition, this plan describes how PNNL will demonstrate compliance with various legal and policy requirements for P2. This plan documents the strategy for implementing the PNNL P2 Program. The scope of the P2 Program includes implementing and helping to implement P2 activities at PNNL. These activities will be implemented according to the Environmental Protection Agency's (EPA) hierarchy of source reduction, recycling, treatment, and disposal. The PNNL P2 Program covers all wastes generated at the Laboratory. These include hazardous waste, low-level radioactive waste, radioactive mixed waste, radioactive liquid waste system waste, polychlorinated biphenyl waste, transuranic waste, and sanitary waste generated by activities at PNNL. Materials, resource, and energy conservation are also within the scope of the PNNL P2 Program

77 FR 23193 - Medicare and Medicaid Programs; Electronic Health Record Incentive Program-Stage 2; Corrections

Science.gov (United States)

2012-04-18

..., 413, and 495 [CMS-0044-CN] RIN 0938-AQ84 Medicare and Medicaid Programs; Electronic Health Record... proposed rule entitled ``Medicare and Medicaid Programs; Electronic Health Record Incentive Program--Stage... (77 FR 13698), the proposed rule entitled ``Medicare and Medicaid Programs; Electronic Health Record...

75 FR 63480 - Medicaid Program: Implementation of Section 614 of the Children's Health Insurance Program...

Science.gov (United States)

2010-10-15

... Children's Health Insurance Program Reauthorization Act of 2009 for Adjustments to the Federal Medical... section 614 of the Children's Health Insurance Program Reauthorization Act of 2009 (CHIPRA), Public Law... Medicaid program and required by Section 614 of the Children's Health Insurance Program Reauthorization Act...

Interactive editing program using display

International Nuclear Information System (INIS)

Lang, I.; Ehsenski, J.; Namsraj, Yu.; Fefilov, B.V.

1976-01-01

A general description is given as well as principal functions are considered of 'DOSE' interactive editor program with a display involved. The program has been elaborated for TRA/1-1001 computer. This program enables one to edit and correct texts in algorithmical languages on a raster display screen as well as to provide perforated tapes for their further usage. 'DOSE' program is regarded as a basic program system for a set of TRA/1 and MINSK-32 computers

Toward Documentation of Program Evolution

DEFF Research Database (Denmark)

Vestdam, Thomas; Nørmark, Kurt

2005-01-01

The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

Constraint Programming versus Mathematical Programming

DEFF Research Database (Denmark)

Hansen, Jesper

2003-01-01

Constraint Logic Programming (CLP) is a relatively new technique from the 80's with origins in Computer Science and Artificial Intelligence. Lately, much research have been focused on ways of using CLP within the paradigm of Operations Research (OR) and vice versa. The purpose of this paper...

25 CFR 39.132 - Can a school integrate Language Development programs into its regular instructional program?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Can a school integrate Language Development programs into... Language Development Programs § 39.132 Can a school integrate Language Development programs into its regular instructional program? A school may offer Language Development programs to students as part of its...

Recombinant Programming

OpenAIRE

Pawlak , Renaud; Cuesta , Carlos; Younessi , Houman

2004-01-01

This research report presents a promising new approach to computation called Recombinant Programming. The novelty of our approach is that it separates the program into two layers of computation: the recombination and the interpretation layer. The recombination layer takes sequences as inputs and allows the programmer to recombine these sequences through the definition of cohesive code units called extensions. The output of such recombination is a mesh that can be used by the interpretation la...

Laser program annual report, 1979

Energy Technology Data Exchange (ETDEWEB)

Coleman, L.W.; Strack, J.R. (eds.)

1980-03-01

This volume provides a program overview, presenting highlights of the technical accomplishments of the elements of the program, as well as discussions of program resources and facilities. Also covered are the work of the Solid-State Laser program element, which includes systems operations, Nova, and research and development activities. (MOW)

Medical Research Volunteer Program (MRVP): innovative program promoting undergraduate research in the medical field.

Science.gov (United States)

Dagher, Michael M; Atieh, Jessica A; Soubra, Marwa K; Khoury, Samia J; Tamim, Hani; Kaafarani, Bilal R

2016-06-06

Most educational institutions lack a structured system that provides undergraduate students with research exposure in the medical field. The objective of this paper is to describe the structure of the Medical Research Volunteer Program (MRVP) which was established at the American University of Beirut, Lebanon, as well as to assess the success of the program. The MRVP is a program that targets undergraduate students interested in becoming involved in the medical research field early on in their academic career. It provides students with an active experience and the opportunity to learn from and support physicians, clinical researchers, basic science researchers and other health professionals. Through this program, students are assigned to researchers and become part of a research team where they observe and aid on a volunteer basis. This paper presents the MRVP's four major pillars: the students, the faculty members, the MRVP committee, and the online portal. Moreover, details of the MRVP process are provided. The success of the program was assessed by carrying out analyses using information gathered from the MRVP participants (both students and faculty). Satisfaction with the program was assessed using a set of questions rated on a Likert scale, ranging from 1 (lowest satisfaction) to 5 (highest satisfaction). A total of 211 students applied to the program with a total of 164 matches being completed. Since the beginning of the program, three students have each co-authored a publication in peer-reviewed journals with their respective faculty members. The majority of the students rated the program positively. Of the total number of students who completed the program period, 35.1 % rated the effectiveness of the program with a 5, 54.8 % rated 4, and 8.6 % rated 3. A small number of students gave lower ratings of 2 and 1 (1.1 % and 0.4 %, respectively). The MRVP is a program that provides undergraduate students with the opportunity to learn about research firsthand