WorldWideScience

Sample records for vyngapour oil field

  1. Oil field experiments of microbial improved oil recovery in Vyngapour, West Siberia, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Murygina, V.P.; Mats, A.A.; Arinbasarov, M.U.; Salamov, Z.Z.; Cherkasov, A.B.

    1995-12-31

    Experiments on microbial improved oil recovery (MIOR) have been performed in the Vyngapour oil field in West Siberia for two years. Now, the product of some producing wells of the Vyngapour oil field is 98-99% water cut. The operation of such wells approaches an economic limit. The nutritious composition containing local industry wastes and sources of nitrogen, phosphorus and potassium was pumped into an injection well on the pilot area. This method is called {open_quotes}nutritional flooding.{close_quotes} The mechanism of nutritional flooding is based on intensification of biosynthesis of oil-displacing metabolites by indigenous bacteria and bacteria from food industry wastes in the stratum. 272.5 m{sup 3} of nutritious composition was introduced into the reservoir during the summer of 1993, and 450 m3 of nutritious composition-in 1994. The positive effect of the injections in 1993 showed up in 2-2.5 months and reached its maximum in 7 months after the injections were stopped. By July 1, 1994, 2,268.6 tons of oil was produced over the base variant, and the simultaneous water extraction reduced by 33,902 m{sup 3} as compared with the base variant. The injections in 1994 were carried out on the same pilot area.

  2. Chemical and biological monitoring of MIOR on the pilot area of Vyngapour oil field, West Sibera, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Arinbasarov, M.U.; Murygina, V.P.; Mats, A.A.

    1995-12-31

    The pilot area of the Vyngapour oil field allotted for MIOR tests contains three injection and three producing wells. These wells were treated in summer 1993 and 1994. Before, during, and after MIOR treatments on the pilot area the chemical compounds of injected and formation waters were studied, as well as the amount and species of microorganisms entering the stratum with the injected water and indigenous bacteria presented in bottomhole zones of the wells. The results of monitoring showed that the bottomhole zone of the injection well already had biocenosis of heterotrophic, hydrocarbon-oxidizing, methanogenic, and sulfate-reducing bacteria, which were besides permanently introduced into the reservoir during the usual waterflooding. The nutritious composition activated vital functions of all bacterial species presented in the bottomhole zone of the injection well. The formation waters from producing wells showed the increase of the content of nitrate, sulfate, phosphate, and bicarbonate ions by the end of MIOR. The amount of hydrocarbon-oxidizing bacteria in formation waters of producing wells increased by one order. The chemical and biological monitoring revealed the activation of the formation microorganisms, but no transport of food industry waste bacteria through the formation from injection to producing wells was found.

  3. Abandoned Texas oil fields

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    Data for Texas abandoned oil fields were primarily derived from two sources: (1) Texas Railroad Commission (TRRC), and (2) Dwight's ENERGYDATA. For purposes of this report, abandoned oil fields are defined as those fields that had no production during 1977. The TRRC OILMASTER computer tapes were used to identify these abandoned oil fields. The tapes also provided data on formation depth, gravity of oil production, location (both district and county), discovery date, and the cumulative production of the field since its discovery. In all, the computer tapes identified 9211 abandoned fields, most of which had less than 250,000 barrel cumulative production. This report focuses on the 676 abandoned onshore Texas oil fields that had cumulative production of over 250,000 barrels. The Dwight's ENERGYDATA computer tapes provided production histories for approximately two-thirds of the larger fields abandoned in 1966 and thereafter. Fields which ceased production prior to 1966 will show no production history nor abandonment date in this report. The Department of Energy hopes the general availability of these data will catalyze the private sector recovery of this unproduced resource.

  4. Tarim Oil Field Company Oil Output Exceeds 5 Million Tons

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    PetroChina Tarim Oil Field Company (Tarim Oil Field), located in the hinterland of Takelamagan Desert in Northwest Xinjiang Autonomous Region,produced 5.006 million tons of crude oil in 2002,ranking it as the sixth largest onshore oil field in China. This is the first time Tarim Oil Field has topped 5 million tons for its crude production.

  5. Oil and gas field database

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young In; Han, Jung Kuy [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    As agreed by the Second Meeting of the Expert Group of Minerals and Energy Exploration and Development in Seoul, Korea, 'The Construction of Database on the Oil and Gas Fields in the APEC Region' is now under way as a GEMEED database project for 1998. This project is supported by Korean government funds and the cooperation of GEMEED colleagues and experts. During this year, we have constructed the home page menu (topics) and added the data items on the oil and gas field. These items include name of field, discovery year, depth, the number of wells, average production (b/d), cumulative production, and API gravity. The web site shows the total number of oil and gas fields in the APEC region is 47,201. The number of oil and gas fields by member economics are shown in the table. World oil and gas statistics including reserve, production consumption, and trade information were added to the database for the users convenience. (author). 13 refs., tabs., figs.

  6. Physicochemical methods for enhancing oil recovery from oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Altunina, L K; Kuvshinov, V A [Institute of Petroleum Chemistry, Siberian Branch of the Russian Academy of Sciences, Tomsk (Russian Federation)

    2007-10-31

    Physicochemical methods for enhancing oil recovery from oil fields that are developed using water flooding and thermal steam treatment are considered. The results of pilot testing of processes based on these methods carried out at West Siberian and Chinese oil fields are analysed. The attention is focused on the processes that make use of surfactant blends and alkaline buffer solutions and thermotropic gel-forming systems.

  7. Physicochemical methods for enhancing oil recovery from oil fields

    Science.gov (United States)

    Altunina, L. K.; Kuvshinov, V. A.

    2007-10-01

    Physicochemical methods for enhancing oil recovery from oil fields that are developed using water flooding and thermal steam treatment are considered. The results of pilot testing of processes based on these methods carried out at West Siberian and Chinese oil fields are analysed. The attention is focused on the processes that make use of surfactant blends and alkaline buffer solutions and thermotropic gel-forming systems.

  8. Chinese Oil Giants Eye Canadian Oil Fields

    Institute of Scientific and Technical Information of China (English)

    Miao Bin

    2005-01-01

    @@ SinoCanada, a subsidiary of Sinopec International Petroleum Exploration and Development Corporation, and Canada-based Synenco Energy Inc announced on May 31 that they have inked a series of agreements to launch a joint venture for common development of the oil sand project located in Athabasca region of Northeast Canada's Alberta Province. Based on the agreements, Sinopec will pay 105 million Canadian dollars (US$84 million) for a stake in Canada's Northern Lights oil sands project while Synenco owns the remaining 60 percent share,and will operate the project as the managing partner.

  9. Optimization of Field Development Scheduling, East Unity Oil Field, Sudan

    Directory of Open Access Journals (Sweden)

    Tagwa A. Musa

    2005-01-01

    Full Text Available In order to improve the reservoir performance in East Unity oil field Sudan, the studies focused on characterization, modeling and simulation of the actual performance and future development. A model was constructed using a three-phase, three dimensional, black oil simulator (ECLIPSE. In this study a data from East Unity oil field Sudan started production at July 1999 was used to perform the optimal oil rate and designing the best location of the new operating wells. Cumulative oil production, oil production rate, Water cut and recovery factor were used as key criteria to see if adding new wells in the area under study are economic risk.

  10. Oil and Gas Field Locations, Geographic NAD83, LDNR (2007) [oil_gas_fields_LDNR_2007

    Data.gov (United States)

    Louisiana Geographic Information Center — This GIS layer consists of oil and gas field approximate center point locations (approximately 1,800). Oil and gas fields not assigned a center point by the DNR...

  11. Field performance of a premium heating oil

    Energy Technology Data Exchange (ETDEWEB)

    Santa, T. [Santa Fuels, Inc., Bridgeport, CT (United States); Jetter, S.M. [Mobil Oil R & D Corp., Paulsboro, NJ (United States)

    1996-07-01

    As part of our ongoing research to provide quality improvements to heating oil, Mobil Oil together with Santa Fuel, Inc., conducted a field trial to investigate the performance of a new premium heating oil. This premium heating oil contains an additive system designed to minimize sludge related problems in the fuel delivery system of residential home heating systems. The additive used was similar to others reported at this and earlier BNL conferences, but was further developed to enhance its performance in oil heat systems. The premium heating oil was bulk additized and delivered to a subset of the customer base. Fuel related, unscheduled service calls were monitored in this test area, as well as in a similar baseline area that did not receive the premium heating oil. Overall, the premium fuel provided a 45% reduction in the occurrence of fuel related, unscheduled service calls as compared to the baseline area. Within this population, there was a reduction of 38% in systems with 275 gallon tanks, and 55% in systems that had >275 gallon tanks showing that the additive is effective in the various configurations of residential oil heat systems. In addition, photographic documentation collected at two accounts supported this improvement by clearly showing that the equipment remained cleaner with the premium heating oil than with regular heating oil. Based on these results, a full marketing trial of this new product has been initiated by Mobil and Santa Fuel, Inc., during the 1995-1996 heating season.

  12. Panorama of PetroChina Jidong Oil Field Company

    Institute of Scientific and Technical Information of China (English)

    XiaoLu

    2003-01-01

    As the old oil fields in East China are currently facing more and more pressure to keep their crude oil production stable in the past few years owing to the high water cut, PetroChina Jidong Oil Field has become a rising star in the country's oil and gas exploration and production sector. Jidong Oil Field

  13. Methanogenic Oil Degradation in the Dagang Oil Field

    Science.gov (United States)

    Jiménez, Núria; Cai, Minmin; Straaten, Nontje; Yao, Jun; Richnow, Hans Hermann; Krüger, Martin

    2014-05-01

    Anaerobic biodegradation is one of the main in situ oil transformation processes in subsurface oil reservoirs. Recent studies have provided evidence of biodegradation of residual oil constituents under methanogenic conditions. Methane, like other biogenic gases, may contribute to reduce the viscosity of oil and enhance its flow characteristics (making it more available) but it can also be used as a energy source. So the aim of the present study was to provide reliable information on in situ biotransformation of oil under methanogenic conditions, and to assess the feasibility of implementing a MEOR strategy at this site. For this reason, chemical and isotopic analyses of injection and production fluids of the Dagang oil field (Hebei province, China) were performed. Microbial abundances were assessed by qPCR, and clone libraries were performed to study the diversity. In addition, microcosms with either oil or 13C-labelled hydrocarbons were inoculated with injection or production waters to characterize microbial processes in vitro. Geochemical and isotopic data were consistent with in situ biogenic methane production linked to aliphatic and aromatic hydrocarbon degradation: GC-MS profiles of petroleum samples were nearly devoid of n-alkanes, linear alkylbenzenes, and alkyltoluenes, and light PAH, confirming that Dagang oil is mostly highly weathered. In addition, carbon and hydrogen isotopic signatures of methane (δ13CCH4 and δDCH4, respectively), and the bulk isotopic discrimination (Δδ13C) between methane and CO2 (between 32 and 65 ) were in accordance with previously reported values for methane formation during hydrocarbon degradation. Furthermore, methane-producing Archaea and hydrocarbon-degrading Bacteria were abundant in produced oil-water samples. On the other hand, our laboratory degradation experiments revealed that autochthonous microbiota are capable of significantly degrade oil within several months, with biodegradation patterns resembling those

  14. A field laboratory for improved oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrandt, A.F.; McDonald, J.; Claridge, E.; Killough, J.

    1992-09-01

    The purpose of Annex III of the Memorandum of Understanding, undertaken by the Houston Petroleum Research Center at the University of Houston, was to develop a field laboratory for research in improved oil recovery using a Gulf Coast reservoir in Texas. The participants: (1) make a field site selection and conducted a high resolution seismic survey in the demonstration field, (2) obtained characteristics of the reservoir (3) developed an evaluation of local flood efficiency in different parts of the demonstration reservoir, (4) used diverse methodology to evaluate the potential recovery of the remaining oil in the test reservoir, (5) developed cross-well seismic tomography, and (6) will transfer the learned technologies to oil operators through publication and workshops. This abstract is an overview of these tasks.

  15. Apparatus for performing oil field laser operations

    Energy Technology Data Exchange (ETDEWEB)

    Zediker, Mark S.; Land, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Koblick, Yeshaya; Moxley, Joel F.

    2017-01-03

    A system, apparatus and methods for delivering high power laser energy to perform laser operations in oil fields and to form a borehole deep into the earth using laser energy. A laser downhole assembly for the delivery of high power laser energy to surfaces and areas in a borehole, which assembly may have laser optics and a fluid path.

  16. The Lennox oil and gas field

    Energy Technology Data Exchange (ETDEWEB)

    Haig, D.B.; Pickering, S.C.; Probert, R. [BHP Petroleum Ltd., London (United Kingdom)

    1997-12-31

    The Lennox oil and gas field is located in Block 110/15 of the East Irish Sea, approximately 10 km west of Southport, Lancashire. The field was discovered in 1992 with well 110/15-6 drilled by the P791 BHP group. The Lennox structure is a rollover anticline in Permo-Triassic sediments formed in the hanging wall of the Formby Point Fault. The reservoir comprises the Triassic Sherwood Sandstone Group, and is characterized by excellent permeability aeolian and fluvial sandstones. The structure is sealed by the overlying shales and evaporites of the Mercia Mudstone Group. To date four wells have been drilled on the Lennox Field and have delineated a free gas cap in communication with a constant thickness oil rim. The hydrocarbons have been sourced from Namurian Holywell shales and reflect complex migration into the Lennox structure. Reservoir studies indicate likely hydrocarbons-in-place of 463 BCF of gas and 218 MMBO of oil. Development approval for the Lennox Field was granted in 1993 with production due to commence in late 1995 from a series of horizontal oil producers. (author)

  17. Crude Production Tops 2 Million Tons at Qinghai Oil Field

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ The crude oil output of Qinghai Oil Field in Qaidam basin of the northwestern China's Qinghai Province topped two million tons at the end of 2000.This is the first time that the annual crude oil output of the oilfield has exceeded two millions, according to Huang Ligong, general manager of Qinghai Oil Field under PetroChina.

  18. Reserve growth of the world's giant oil fields

    Science.gov (United States)

    Klett, T.R.; Schmoker, J.W.

    2005-01-01

    Analysis of estimated total recoverable oil volume (field size) of 186 well-known giant oil fields of the world (>0.5 billion bbl of oil, discovered prior to 1981), exclusive of the United States and Canada, demonstrates general increases in field sizes through time. Field sizes were analyzed as a group and within subgroups of the Organization of Petroleum Exporting Countries (OPEC) and non-OPEC countries. From 1981 through 1996, the estimated volume of oil in the 186 fields for which adequate data were available increased from 617 billion to 777 billion bbl of oil (26%). Processes other than new field discoveries added an estimated 160 billion bbl of oil to known reserves in this subset of the world's oil fields. Although methods for estimating field sizes vary among countries, estimated sizes of the giant oil fields of the world increased, probably for many of the same reasons that estimated sizes of oil fields in the United States increased over the same time period. Estimated volumes in OPEC fields increased from a total of 550 billion to 668 billion bbl of oil and volumes in non-OPEC fields increased from 67 billion to 109 billion bbl of oil. In terms of percent change, non-OPEC field sizes increased more than OPEC field sizes (63% versus 22%). The changes in estimated total recoverable oil volumes that occurred within three 5-year increments between 1981 and 1996 were all positive. Between 1981 and 1986, the increase in estimated total recoverable oil volume within the 186 giant oil fields was 11 billion bbl of oil; between 1986 and 1991, the increase was 120 billion bbl of oil; and between 1991 and 1996, the increase was 29 billion bbl of oil. Fields in both OPEC and non-OPEC countries followed trends of substantial reserve growth.

  19. Venezuelan oil field revival bids won

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-29

    This paper reports that four private sector companies or combines will operate inactive oil fields in Venezuela under state owned Petroleos de Venezuela's marginal field reactivation program. The award of operating contract to winning bidders marks the first time private companies will be allowed to produce crude oil in Venezuela since nationalization of the industry in 1976. Winning bidders have committed a total of $720 million in investments to the program during the 1990s. Current plans call for drilling 670 appraisals and development wells, conducting 250 workovers and well repairs, and conducting about 2,9000 line km of seismic surveys. Venezuela's energy ministry is targeting a production level of 90,000 b/d by the end of the decade from the reactivated fields.

  20. Geology of the Tambaredjo oil field, Suriname

    Energy Technology Data Exchange (ETDEWEB)

    Dronkert, H. (Delft Univ. of Technology (Netherlands)); Wong, T.E. (Geological Survey of the Netherlands, Haarlem (Netherlands))

    1993-02-01

    After the initial discovery in the sixties of oil below the coastal plain of Suriname (S. America), the State Oil Company of Suriname started production of the unique Tambaredjo field in 1982. The heavy, biodegraded oil (14-16[degrees] API) is produced under compaction drive, from the Paleocene T-sand (average thickness 5 m) at a depth of about 300 m. More than 300 wells have been drilled in an area of about 200 km[sup 2]. High resolution seismics makes it possible to correlate units down to 2 m thick. This dense network of bore holes is very suitable for geological correlations and 3D modeling. The T-sand reservoir consists of angular, medium to coarse grained unconsolidated sands with interfingering clays and lignites. The sands are deposited on a well cemented erosional Cretaceous basement. The reservoir is sealed by locally continuous clays. The oil is trapped in structural highs created by syn-sedimentary rejuvenated basement faults. The depositional environment of the T-sand ranges from fluviatile to deltaic. Frequent avulsion and synsedimentary faulting created a highly compartmented reservoir. Although interconnectedness of the sand bodies is high, clay smears and silting out of the edges confine reservoir compartments. The best genetic sand units such as channel fills or mouth bar deposits hardly correlate over more than a few hundred meters. The Tambaredjo oil field offers an unique opportunity to study the detailed sedimentology and petroleum geology of a fluvio-deltaic transitional realm on the passive margin along the Guiana coast.

  1. Oil and gas field code master list, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-16

    This document contains data collected through October 1993 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service.

  2. Accounting for the waterless period of oil production in calculations on oil field production design

    Energy Technology Data Exchange (ETDEWEB)

    Aminov, M.F.; Butorin, O.I.

    1981-01-01

    Formulae on the dynamics of oil and liquid from a methodology developed by the Tatar Scientific-Research and Design Institute for the Oil Industry are adjusted, accounting for the waterless period in oil production. It is demonstrated that the process of accounting for the waterless period in oil production leads to a more accurate prediction of the engineering parameters for mining and oil field.

  3. Models of optimal technology for removing oil by secondary methods of developing highly viscous oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Jewulski, J.

    1982-01-01

    This paper presents research on developing several methods of optimal technology for removing oil in highly viscous oil fields from the following wells: Lubno-3, Kharklova-Gvaretstvo 154 and Vetzhno (heavy oil). The problem connected with preparing the displacement fluids, with special emphasis on the authors patented technology for producing micellar solutions are discussed. The studies of dislocation fluids (including modified ones) were conducted at 3 temperatures: 293, 308, and 323/sup 0/K and with and without micellar solutions. The tests were used to idetify static regressive models of oil removal from oil fields. The model is satisfactorily accurate in predicting the amount of oil yield by using various secondary methods. Practical conclusions are reached based on an analysis of the studies. These conclusions provide the basis for industrial tests to increase the effectiveness of waterflooding highly viscous oil fields. They can also be used to develop old (gased) oil fields, an advantage considering the current fuel-energy situation.

  4. Assessment of microorganisms from Indonesian Oil Fields

    Energy Technology Data Exchange (ETDEWEB)

    Kadarwati, S.; Udiharto, M.; Rahman, M.; Jasjfi, E.; Legowo, E.H. [Research and Development Centre for Oil and Gas Technology LEMIGAS, Jakarta Selatan (Indonesia)

    1995-12-31

    Petroleum resources have been the mainstay of the national development in Indonesia. However, resources are being depleted after over a century of exploitation, while the demand continues to grow with the rapid economic development of the country. In facing the problem, EOR has been applied in Indonesia, such as the steamflooding project in Duri field, but a more energy efficient technology would be preferable. Therefore, MEOR has been recommended as a promising solution. Our study, aimed at finding indigenous microorganisms which can be developed for application in MEOR, has isolated microbes from some oil fields of Indonesia. These microorganisms have been identified, their activities studied, and the effects of their metabolisms examined. This paper describes the research carried out by LEMIGAS in this respect, giving details on the methods of sampling, incubation, identification, and activation of the microbes as well as tests on the effects of their metabolites, with particular attention to those with potential for application in MEOR.

  5. Application of Lean Tools in the Oil Field Safety Management

    Directory of Open Access Journals (Sweden)

    Jinze Song

    2016-11-01

    Full Text Available Current safety management in oil fields is in low efficiency and data from DOE indicated that the injury rate in the oil and gas field was greater than those for all the other U.S. industries. The paperintroduced lean concepts and tools to the safety management in oil fields. In theresearch, a new safety management methodology has been set up. The study also compared the current safety management and the new safety management which was built up by lean concepts. In addition, several lean tools have been modified to make them fit and work better in oil fields.

  6. Rheological properties of crude oils in Yaregskoye and Yaraktinskoye oil fields

    Science.gov (United States)

    Manzhai, V. N.; Le Grand Monkam Monkam, Clovis; Terre, D. A.

    2016-09-01

    Rotary viscometer tests of crude oil with a high content of resins and asphaltenes (Yaregskoye oil field) and crude oil with high paraffin content (Yaraktinskoye oil field) have been conducted. The typical flow curves for these oil types have been plotted. It has been detected that these oils are non-Newtonian fluids, viscosity of which is dependent on shear rate. Based on Arrhenius-Eyring equation, calculations of viscous flow activation energy and complex structural unit (CSU) sizes have been performed. It has been stated that there is a tenfold reduction in CSU size in asphaltic crude oil with the increase in shear rate in a rotary viscometer, while particle size in paraffinic crude oil does not essentially change under the same hydrodynamic conditions.

  7. Oil and Gas Field Code Master List 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-04

    This is the ninth annual edition of the Energy Information Administration's (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1990 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. There are 54,963 field records in this year's Oil and Gas Field Code Master List (FCML). This amounts to 467 more than in last year's report. As it is maintained by EIA, the Master List includes: Field records for each state and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides;field records for each alias field name; fields crossing state boundaries that may be assigned different names by the respective state naming authorities.

  8. Integrated field modelling[Oil and gas fields

    Energy Technology Data Exchange (ETDEWEB)

    Nazarian, Bamshad

    2002-07-01

    This research project studies the feasibility of developing and applying an integrated field simulator to simulate the production performance of an entire oil or gas field. It integrates the performance of the reservoir, the wells, the chokes, the gathering system, the surface processing facilities and whenever applicable, gas and water injection systems. The approach adopted for developing the integrated simulator is to couple existing commercial reservoir and process simulators using available linking technologies. The simulators are dynamically linked and customised into a single hybrid application that benefits from the concept of open software architecture. The integrated field simulator is linked to an optimisation routine developed based on the genetic algorithm search strategies. This enables optimisation of the system at field level, from the reservoir to the process. Modelling the wells and the gathering network is achieved by customising the process simulator. This study demonstrated that the integrated simulation improves current capabilities to simulate the performance of the entire field and optimise its design. This is achieved by evaluating design options including spread and layout of the wells and gathering system, processing alternatives, reservoir development schemes and production strategies. Effectiveness of the integrated simulator is demonstrated and tested through several field-level case studies that discuss and investigate technical problems relevant to offshore field development. The case studies cover topics such as process optimisation, optimum tie-in of satellite wells into existing process facilities, optimal well location and field layout assessment of a high pressure high temperature deepwater oil field. Case study results confirm the viability of the total field simulator by demonstrating that the field performance simulation and optimal design were obtained in an automated process with treasonable computation time. No significant

  9. Integrated field modelling[Oil and gas fields

    Energy Technology Data Exchange (ETDEWEB)

    Nazarian, Bamshad

    2002-07-01

    This research project studies the feasibility of developing and applying an integrated field simulator to simulate the production performance of an entire oil or gas field. It integrates the performance of the reservoir, the wells, the chokes, the gathering system, the surface processing facilities and whenever applicable, gas and water injection systems. The approach adopted for developing the integrated simulator is to couple existing commercial reservoir and process simulators using available linking technologies. The simulators are dynamically linked and customised into a single hybrid application that benefits from the concept of open software architecture. The integrated field simulator is linked to an optimisation routine developed based on the genetic algorithm search strategies. This enables optimisation of the system at field level, from the reservoir to the process. Modelling the wells and the gathering network is achieved by customising the process simulator. This study demonstrated that the integrated simulation improves current capabilities to simulate the performance of the entire field and optimise its design. This is achieved by evaluating design options including spread and layout of the wells and gathering system, processing alternatives, reservoir development schemes and production strategies. Effectiveness of the integrated simulator is demonstrated and tested through several field-level case studies that discuss and investigate technical problems relevant to offshore field development. The case studies cover topics such as process optimisation, optimum tie-in of satellite wells into existing process facilities, optimal well location and field layout assessment of a high pressure high temperature deepwater oil field. Case study results confirm the viability of the total field simulator by demonstrating that the field performance simulation and optimal design were obtained in an automated process with treasonable computation time. No significant

  10. Coreflood assay using extremophile microorganisms for recovery of heavy oil in Mexican oil fields.

    Science.gov (United States)

    Castorena-Cortés, Gladys; Roldán-Carrillo, Teresa; Reyes-Avila, Jesús; Zapata-Peñasco, Icoquih; Mayol-Castillo, Martha; Olguín-Lora, Patricia

    2012-10-01

    A considerable portion of oil reserves in Mexico corresponds to heavy oils. This feature makes it more difficult to recover the remaining oil in the reservoir after extraction with conventional techniques. Microbial enhanced oil recovery (MEOR) has been considered as a promising technique to further increase oil recovery, but its application has been developed mainly with light oils; therefore, more research is required for heavy oil. In this study, the recovery of Mexican heavy oil (11.1°API and viscosity 32,906 mPa s) in a coreflood experiment was evaluated using the extremophile mixed culture A7, which was isolated from a Mexican oil field. Culture A7 includes fermentative, thermophilic, and anaerobic microorganisms. The experiments included waterflooding and MEOR stages, and were carried out under reservoir conditions (70°C and 9.65 MPa). MEOR consisted of injections of nutrients and microorganisms followed by confinement periods. In the MEOR stages, the mixed culture A7 produced surface-active agents (surface tension reduction 27 mN m⁻¹), solvents (ethanol, 1738 mg L⁻¹), acids (693 mg L⁻¹), and gases, and also degraded heavy hydrocarbon fractions in an extreme environment. The interactions of these metabolites with the oil, as well as the bioconversion of heavy oil fractions to lighter fractions (increased alkanes in the C₈-C₃₀ range), were the mechanisms responsible for the mobility and recovery of heavy oil from the porous media. Oil recovery by MEOR was 19.48% of the residual oil in the core after waterflooding. These results show that MEOR is a potential alternative to heavy oil recovery in Mexican oil fields. Copyright © 2012 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  11. Characteristics of operation and possible oil recovery from the sixth formation of Arlansk oil field. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Viktorov, P.F.; Teterev, I.G.

    1970-01-01

    This field is characterized by complex geological variations, high viscosity oil (16 to 39 cp), and extreme heterogeneity. The field has been under a peripheral waterflood for 10 yr, however even at high water-cut (50 to 75%), only 40% of the reserve has been recovered. The high water-cut results from premature water breakthrough in high-permeability zones and from water coning. As cumulative oil recovery increases, water production increases exponentially. Oil recovery can be increased only 3 to 4%, by increasing the removal of fluids from wells. Consideration is being given to use of hot water and high-pressure gas to increase oil recovery.

  12. Oil and Gas field code master list 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This is the fourteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1995 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the US. The Field Code Index, a listing of all field names and the States in which they occur, ordered by field code, has been removed from this year`s publications to reduce printing and postage costs. Complete copies (including the Field Code Index) will be available on the EIA CD-ROM and the EIA World-Wide Web Site. Future editions of the complete Master List will be available on CD-ROM and other electronic media. There are 57,400 field records in this year`s Oil and Gas Field Code Master List. As it is maintained by EIA, the Master List includes the following: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (see definition of alias below); and fields crossing State boundaries that may be assigned different names by the respective State naming authorities. Taking into consideration the double-counting of fields under such circumstances, EIA identifies 46,312 distinct fields in the US as of October 1995. This count includes fields that no longer produce oil or gas, and 383 fields used in whole or in part for oil or gas Storage. 11 figs., 6 tabs.

  13. Oil dehydration using hydrodynamic effects and electrical fields

    Energy Technology Data Exchange (ETDEWEB)

    Skipin, V.S.; Cherepnin, V.V.; Didenko, V.I.

    1980-01-01

    This article examines the influence of hydrodynamic effects and electrical fields upon the water content of commercial oil. It is demonstrated that increasing the period of contact of the emulsion with a reagent and a unit for emulsive perturbation and reagent transfer, leads to a dosage reduction with a resulting high-quality of oil.

  14. Assessment of remaining recoverable oil in selected major oil fields of the Permian Basin, Texas and New Mexico

    Science.gov (United States)

    Tennyson, Marilyn E.; Cook, Troy A.; Charpentier, Ronald R.; Gautier, Donald L.; Klett, Timothy R.; Verma, Mahendra K.; Ryder, Robert T.; Attanasi, E.D.; Freeman, P.A.; Le, Phoung A.

    2012-01-01

    The U.S. Geological Survey (USGS) recently completed an estimate of technically recoverable, conventional oil in selected oil fields in the Permian Basin in west Texas and southeastern New Mexico. The mean total volume of potential additional oil resources that might be added using improved oil-recovery technologies was estimated to be about 2.7 billion barrels of oil.

  15. Oil field produced water discharges into wetlands in Wyoming

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Approximately 600 oil field produced water discharges are permitted in Wyoming by the State’s Department of Environmental Quality's (WDEQ) National Pollutant...

  16. Rangely Oil Field Perch Survey, 2001-2004

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Data are the results of raptor perch surveys conducted monthly from August 2001 - July 2004 along a standardized survey route in the Rangely Oil Field (ROF),...

  17. Largest US oil and gas fields, August 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-06

    The Largest US Oil and Gas Fields is a technical report and part of an Energy Information Administration (EIA) series presenting distributions of US crude oil and natural gas resources, developed using field-level data collected by EIA`s annual survey of oil and gas proved reserves. The series` objective is to provide useful information beyond that routinely presented in the EIA annual report on crude oil and natural gas reserves. These special reports also will provide oil and gas resource analysts with a fuller understanding of the nature of US crude oil and natural gas occurrence, both at the macro level and with respect to the specific subjects addressed. The series` approach is to integrate EIA`s crude oil and natural gas survey data with related data obtained from other authoritative sources, and then to present illustrations and analyses of interest to a broad spectrum of energy information users ranging from the general public to oil and gas industry personnel.

  18. Shengli Oil Fields: Today and Tomorrow

    Institute of Scientific and Technical Information of China (English)

    Lu Renjie

    1996-01-01

    @@ Shengli oil area lies in the Yellow River Delta, in the north of Shandong Province bordering the Bohai Bay. The area is scattered over 28 counties, covering 37 000 square kilom eters. The main part of exploration and exploitation is located on both sides of the Yellow River estuary within the territory of Dongying City.

  19. Restructuring Raises Revenue of Liaohe Oil Field

    Institute of Scientific and Technical Information of China (English)

    Xiao Qiuju

    2002-01-01

    @@ Liaohe Petroleum Exploration Bureau, as a Stateowned oil giant company in Northeast China's Liaoning Province, has made significant progress in the nationwide drive o restructure State-owned enterprises. Once plagued by excessive laborers and backward production equipment, the bureau has adopted a series of effective measures on human resource management, market expansion and technology renovation.

  20. Oil and gas field code master list 1994

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This is the thirteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1994 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. The master field name spellings and codes are to be used by respondents when filing the following Department of Energy (DOE) forms: Form EIA-23, {open_quotes}Annual Survey of Domestic Oil and Gas Reserves,{close_quotes} filed by oil and gas well operators (field codes are required from larger operators only); Forms FERC 8 and EIA-191, {open_quotes}Underground Gas Storage Report,{close_quotes} filed by natural gas producers and distributors who operate underground natural gas storage facilities. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161, (703) 487-4650. In order for the Master List to be useful, it must be accurate and remain current. To accomplish this, EIA constantly reviews and revises this list. The EIA welcomes all comments, corrections, and additions to the Master List. All such information should be given to the EIA Field Code Coordinator at (214) 953-1858. EIA gratefully acknowledges the assistance provides by numerous State organizations and trade associations in verifying the existence of fields and their official nomenclature.

  1. Oil and gas field code master list 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Oil and Gas Field Code Master List 1997 is the sixteenth annual listing of all identified oil and gas fields in the US. It is updated with field information collected through October 1997. The purpose of this publication is to provide unique, standardized codes for identification of domestic fields. Use of these field codes fosters consistency of field identification by government and industry. As a result of their widespread adoption they have in effect become a national standard. The use of field names and codes listed in this publication is required on survey forms and other reports regarding field-specific data collected by EIA. There are 58,366 field records in this year`s FCML, 437 more than last year. The FCML includes: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (definition of alias is listed); fields crossing State boundaries that may be assigned different names by the respective State naming authorities. This report also contains an Invalid Field Record List of 4 records that have been removed from the FCML since last year`s report. These records were found to be either technically incorrect or to represent field names which were never recognized by State naming authorities.

  2. Field study of heavy oil viscosity reduction for production transport

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, J.; Annichiariccom, G.; Montanez, M. [Ecopetrol S.A. (Venezuela); Faust, M.; Weathers, T. [Nalco Energy Services (Colombia); Parra, R. [Nalco de Colombia Ltda. (Colombia)

    2011-07-01

    In the heavy oil industry, production and transportation are expensive processes requiring complex equipment and procedures. The main issue with heavy crude oil is its high viscosity. A method using naphtha injection was developed to dilute the fluids and aid in water separation, but this method is expensive and raises safety issues. To reduce naphtha consumption, Ecopetrol and Nalco Energy Services developed a new dispersion technology. This paper presents this technology and the results of its field trial in the Chichimene oil field. Key production indicators were monitored to determine how effective the emulsion method was in enhancing production. Results showed no negative effect on the separation facility or oil and water quality while reducing by 75% the injection of diluent. This paper presents a dispersion technology which successfully reduced the need for naphtha and thus reduced production costs.

  3. Experimental Research on the Reusing & Recycling Technology of Oil Extraction Wastewater Treatment in Oil Field

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    How to use water resource effectively is an important problem in developing industry. Three combined processes which are composed of oil separator+de-emulsification flocculation+sand filtration (SDF), oil separator +hydrolytic acidification+SBR (SAS) and oil separator+de-emulsification flocculation +SBR (SDS) are conducted in laboratory-scale experiment to treat oil extraction wastewater for an oil-field. The experimental results show that the removal rate of COD(chemistry oxygen demand) and oil treated by SDF process are 85% and 95% respectively, the residual oil in effluent can meet the discharge standard, but the residual COD can not. The removal rate of COD and BOD (biological oxygen demand) of the SAS effluent are 85% and 90% respectively, the BOD can meet but the COD can not meet discharge standard. So the further treatment is required in the process. The SDS effluent with removal rate of 95% and 90% are obtained for COD and BOD respectively, which can completely meet the national standards of oil wastewater discharge and refilling (China). The experimental result shows that oil extraction wastewater has turned into water resource after being treated by SDS.

  4. Verifying a Simplified Fuel Oil Flow Field Measurement Protocol

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, H.; Dentz, J.; Doty, C.

    2013-07-01

    The Better Buildings program is a U.S. Department of Energy program funding energy efficiency retrofits in buildings nationwide. The program is in need of an inexpensive method for measuring fuel oil consumption that can be used in evaluating the impact that retrofits have in existing properties with oil heat. This project developed and verified a fuel oil flow field measurement protocol that is cost effective and can be performed with little training for use by the Better Buildings program as well as other programs and researchers.

  5. Verifying a Simplified Fuel Oil Field Measurement Protocol

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, Hugh [Advanced Residential Integrated Energy Solutions Collaborative (ARIES), New York, NY (United States); Dentz, Jordan [Advanced Residential Integrated Energy Solutions Collaborative (ARIES), New York, NY (United States); Doty, Chris [Advanced Residential Integrated Energy Solutions Collaborative (ARIES), New York, NY (United States)

    2013-07-01

    The Better Buildings program is a U.S. Department of Energy program funding energy efficiency retrofits in buildings nationwide. The program is in need of an inexpensive method for measuring fuel oil consumption that can be used in evaluating the impact that retrofits have in existing properties with oil heat. This project developed and verified a fuel oil flow field measurement protocol that is cost effective and can be performed with little training for use by the Better Buildings program as well as other programs and researchers.

  6. Reserve Growth in Oil Fields of West Siberian Basin, Russia

    Science.gov (United States)

    Verma, Mahendra K.; Ulmishek, Gregory F.

    2006-01-01

    Although reserve (or field) growth has proven to be an important factor contributing to new reserves in mature petroleum basins, it is still a poorly understood phenomenon. Limited studies show that the magnitude of reserve growth is controlled by several major factors, including (1) the reserve booking and reporting requirements in each country, (2) improvements in reservoir characterization and simulation, (3) application of enhanced oil recovery techniques, and (4) the discovery of new and extensions of known pools in discovered fields. Various combinations of these factors can affect the estimates of proven reserves in particular fields and may dictate repeated estimations of reserves during a field's life. This study explores the reserve growth in the 42 largest oil fields in the West Siberian Basin, which contain about 55 percent of the basin's total oil reserves. The West Siberian Basin occupies a vast swampy plain between the Ural Mountains and the Yenisey River, and extends offshore into the Kara Sea; it is the richest petroleum province in Russia. About 600 oil and gas fields with original reserves of 144 billion barrels of oil (BBO) and more than 1,200 trillion cubic feet of gas (TCFG) have been discovered. The principal oil reserves and most of the oil fields are in the southern half of the basin, whereas the northern half contains mainly gas reserves. Sedimentary strata in the basin consist of Upper Triassic through Tertiary clastic rocks. Most oil is produced from Neocomian (Lower Cretaceous) marine to deltaic sandstone reservoirs, although substantial oil reserves are also in the marine Upper Jurassic and continental to paralic Lower to Middle Jurassic sequences. The majority of oil fields are in structural traps, which are gentle, platform-type anticlines with closures ranging from several tens of meters to as much as 150 meters (490 feet). Fields producing from stratigraphic traps are generally smaller except for the giant Talin field which

  7. Tar mats and residual oil distribution in a giant oil field offshore Abu Dhabi

    Energy Technology Data Exchange (ETDEWEB)

    Carpentier, Bernard [Institut Francais du Petrole and 4 Av. de Bois Preau, 92852 Rueil-Malmaison Cedex (France); Arab, Hani [ZADCO P.O. Box 46808, Abu Dhabi(United Arab Emirates); Pluchery, Eric; Chautru, Jean-Marc [Beicip-Franlab 232, Av. Napoleon Bonaparte, BP 213, 92502 Rueil-Malmaison Cedex (France)

    2007-09-15

    This paper describes how geochemical data (Rock Eval analysis, SARA composition) combined with wireline log interpretation allows for the recognition of the distribution and continuity of bitumens in a main reservoir of an offshore giant field in Abu Dhabi. The integration of new geochemical data with data and field information provided by the oil company ZADCO allows for the recognition of two types of bitumen rich levels in the main reservoir of the field: (a) one corresponding to bitumen rich main reservoir intervals associated with high resistivity and high oil saturation, these intervals can be called 'tar mats', (b) the other corresponding to low oil saturated intervals, and can be classified as 'heavy residual oil'. In terms of lateral and vertical distribution, the tar mats are found at the crestal area of the Present-day structure and are located at the base of the reservoir unit above a tight limestone which plays a role of being a vertical permeability barrier. The tar mats seem to be independent of the Present-day OWC and are not related to biodegradation processes. The heavy residual oil is mainly located in the Northeast and the Southeast parts of the field and close to the OWC but it is also present all around the field except (1) in the west, in the area of the spill point and (2) in the Northwest area where direct contact between mobile oil and water is detected. Study of the structural evolution demonstrates that a tilting of the field began at Dammam age time (Eocene). The tilting of the structure led to a reduction of the structural closure in the West followed by the leakage of part of the originally trapped oil. Numerical modeling of such a geological scenario leads to a distribution of fluids (water, movable oil and residual oil) very close to the one observed at Present-day time in the field. This modeling allows a prediction of the extension and distribution of the residual heavy oil within the studied reservoir and can

  8. Microbial consortia in Oman oil fields: a possible use in enhanced oil recovery.

    Science.gov (United States)

    Al-Bahry, Saif N; Elshafie, Abdulkader E; Al-Wahaibi, Yahya M; Al-Bemani, Ali S; Joshi, Sanket J; Al-Maaini, Ratiba A; Al-Alawi, Wafa J; Sugai, Yuichi; Al-Mandhari, Mussalam

    2013-01-01

    Microbial enhanced oil recovery (MEOR) is one of the most economical and efficient methods for extending the life of production wells in a declining reservoir. Microbial consortia from Wafra oil wells and Suwaihat production water, Al-Wusta region, Oman were screened. Microbial consortia in brine samples were identified using denaturing gradient gel electrophoresis and 16S rRNA gene sequences. The detected microbial consortia of Wafra oil wells were completely different from microbial consortia of Suwaihat formation water. A total of 33 genera and 58 species were identified in Wafra oil wells and Suwaihat production water. All of the identified microbial genera were first reported in Oman, with Caminicella sporogenes for the first time reported from oil fields. Most of the identified microorganisms were found to be anaerobic, thermophilic, and halophilic, and produced biogases, biosolvants, and biosurfactants as by-products, which may be good candidates for MEOR.

  9. Correlation of source rocks and oils in the Sespe oil field, Ventura County, California

    Energy Technology Data Exchange (ETDEWEB)

    Lillis, P.G. (Geological Survey, Lakewood, CO (United States)); Clark, M.S. (Colorado School of Mines, Golden (United States))

    1991-02-01

    The Sespe oil field in the central Ventura basin produces low sulfur (< 1%), intermediate gravity (23-32{degree} API) oil from Middle Eocene to Lower Miocene reservoirs in the upper plate of the San Cayetano thrust. Previous studies proposed the Eocene Cozy Dell, Matilija, and Juncal formations in the San Cayetano overthrust as the source rocks. Alternatively, the oils could be derived from the Miocene Monterey Formation in the subthrust. Gas chromatography and gas chromatography/mass spectrometry data are used to characterize and correlate the Sespe oils from comparison with bitumen extracts of the possible source rocks. The oils have pristane/phytane ratios of 1.3-1.6, bisnorhopane/hopane ratios of about 0.2, and relatively low amounts of diasteranes, oleanane, and C{sub 29} steranes. These data indicate that all of the oils belong to the same family and that variations in the API gravity are due to the degree of biodegradation. In addition, the sterane and triterpane distributions imply that the source organic matter is derived from marine phytoplankton and bacteria with a minor contribution from land plants. The Sespe oils do not correlate with the upper plate Eocene source rocks but correlate fairly well with the upper plate Eocene source rocks. Thus, a subthrust source is proposed. However, the Sespe oils have higher gravity and lower sulfur content than typical Monterey oils. The low sulfur content may result from the higher iron content, due to terrigenous input, of the Sespe field source rocks relative to other Monterey source rocks. Alternatively, the Sespe oils were expelled from the Monterey Formation at relatively high levels of thermal maturity.

  10. Deepwater oil and gas field development in South China Sea

    Institute of Scientific and Technical Information of China (English)

    Zhang Dagang; Wybro Pieter; Kang Yongtian

    2013-01-01

    This paper focuses on potential development models of future oil and gas exploration in South China Sea.A detailed study of current development models worldwide is performed through some examples of industry installed/ongoing projects and major technical issues encountered during these practice.Key technologies are discussed for the success of field development.Some of the technologies and field development experience can be used for South China Sea project.Several models are studied in field development for different scenarios,including marginal field,large oil field and gas field.With the massive investment activities,continued improved technologies,and rapidly growing pool of professionals,the offshore industry in China will soon encounter a golden period.

  11. Alkanes in shrimp from the Buccaneer Oil Field

    Energy Technology Data Exchange (ETDEWEB)

    Middleditch, B.S.; Basile, B.; Chang, E.S.

    1982-07-01

    A total of 36 samples of shrimp were examined from the region of the Buccaneer oil field, eighteen of which were representatives of the commercial species Penaeus aztecus and the rest were various other species: Penaeus duorarum (pink shrimp), Trachypenaeus duorarum (sugar shrimp), Squilla empusa (mantis shrimp), and Sicyonia dorsalis (chevron shrimp). The alkanes and deuteriated alkanes were completely separated by GC, so a mass spectrometer was not required for their detection and quantitation. To confirm the identities of individual compounds, however, some samples were examined by combined gas chromatography-mass spectrometry. Results show that only thirteen of the forty shrimp collected from the region of the Buccaneer oil field contained petroleum alkanes, and the majority of these were obtained from trawls immediately adjacent to the production platforms. It appears that shrimp caught in the region of the Buccaneer oil field are not appreciably tainted with hydrocarbons discharged from the production platforms. (JMT)

  12. Cumulative impacts of oil fields on northern alaskan landscapes.

    Science.gov (United States)

    Walker, D A; Webber, P J; Binnian, E F; Everett, K R; Lederer, N D; Nordstrand, E A; Walker, M D

    1987-11-06

    Proposed further developments on Alaska's Arctic Coastal Plain raise questions about cumulative effects on arctic tundra ecosystems of development of multiple large oil fields. Maps of historical changes to the Prudhoe Bay Oil Field show indirect impacts can lag behind planned developments by many years and the total area eventually disturbed can greatly exceed the planned area of construction. For example, in the wettest parts of the oil field (flat thaw-lake plains), flooding and thermokarst covered more than twice the area directly affected by roads and other construction activities. Protecting critical wildlife habitat is the central issue for cumulative impact analysis in northern Alaska. Comprehensive landscape planning with the use of geographic information system technology and detailed geobotanical maps can help identify and protect areas of high wildlife use.

  13. A field laboratory for improved oil recovery. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrandt, A.F.; McDonald, J.; Claridge, E.; Killough, J.

    1992-09-01

    The purpose of Annex III of the Memorandum of Understanding, undertaken by the Houston Petroleum Research Center at the University of Houston, was to develop a field laboratory for research in improved oil recovery using a Gulf Coast reservoir in Texas. The participants: (1) make a field site selection and conducted a high resolution seismic survey in the demonstration field, (2) obtained characteristics of the reservoir (3) developed an evaluation of local flood efficiency in different parts of the demonstration reservoir, (4) used diverse methodology to evaluate the potential recovery of the remaining oil in the test reservoir, (5) developed cross-well seismic tomography, and (6) will transfer the learned technologies to oil operators through publication and workshops. This abstract is an overview of these tasks.

  14. Composition and placement process for oil field chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Cantu, L.A.; Yost, M.E.

    1991-01-22

    This patent describes a process for the continuous release of an oil field chemical within a subterranean hydrocarbon bearing formation or wellbore penetrating such formation. It comprises placing the oil field chemical in a polymeric microcapsule; dispersing such polymeric microcapsules; introducing the wellbore fluid containing the microcapsules into a well bore or subterranean formation through a wellbore; then allowing water and temperature at formation conditions to degrade; continuously releasing the chemical from the degraded microcapsules. This patent describes a composition comprising an oil field chemical incorporated in a polymeric microcapsule comprising the condensation product of hydroxyacetic acid monomer or hydroxyacetic acid co-condensed with up to 15 percent by weight of other hydroxy-, carboxylic acid-, or hydroxycarboxylic acid- containing moieties. The product has a number average molecular weight of from about 200 to about 4000.

  15. Microbial response to nitrate treatment in offshore oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Boedtker, Gunhild

    2009-07-01

    North Sea oil reservoirs are often injected with deaerated sea water in order to enhance oil recovery. The high sulphate content of sea water combined with the anoxic conditions stimulates growth of sulphate-reducing bacteria (SRB) in the water injection system and the reservoir. SRB produce the highly toxic and corrosive gas hydrogen sulphide (HZS) during anaerobic respiration with sulphate. Accumulation of HZS leads to corrosion and reservoir souring, which may result in reduced gas quality, separation problems and increased maintenance costs. Biocides have traditionally been used to prevent SRB activity in North Sea oil fields. During the last decade, however, the environmentally sound method of nitrate treatment has replaced biocides on several fields. The method is based on shifting the microbial activity from sulphate reduction to nitrate reduction by introducing nitrate as an alternative electron acceptor for anaerobic respiration. Results presented in the current thesis show that nitrate treatment has resulted in long-term inhibition of SRB activity and a reduction in corrosion of up to 40% in sea water injection systems at the Veslefrikk and Gullfaks oil fields. Molecular analysis (PCR-DGGE) of pipeline biofilm from Veslefrikk showed that sulphide-oxidizing nitrate-reducing bacteria (NR-SOB) constituted the major metabolic group during nitrate treatment, and that the bacterial community composition remained stable during years. Reduction in sulphide produced from the Gullfaks field showed that nitrate treatment was effective also at reservoir level. Analysis of back flowed injection water from a nitrate-treated Statfjord reservoir showed that heterotrophic nitrate-reducing bacteria (hNRB) constituted the major metabolic group, and that the in situ HZS level was 10 fold lower than experienced during biocides treatment and 100 fold lower than experienced during produced water reinjection (PWRI). At the Norne oil field oxic sea water is injected along with

  16. Measuring marine oil spill extent by Markov Random Fields

    Science.gov (United States)

    Moctezuma, Miguel; Parmiggiani, Flavio; Lopez Lopez, Ludwin

    2014-10-01

    The Deepwater Horizon oil spill of the Gulf of Mexico in the spring of 2010 was the largest accidental marine oil spill in the history of the petroleum industry. An immediate request, after the accident, was to detect the oil slick and to measure its extent: SAR images were the obvious tool to be employed for the task. This paper presents a processing scheme based on Markov Random Fields (MRF) theory. MRF theory describes the global information by probability terms involving local neighborhood representations of the SAR backscatter data. The random degradation introduced by speckle noise is dealt with a pre-processing stage which applies a nonlinear diffusion filter. Spatial context attributes are structured by the Bayes equation derived from a Maximum-A-Posteriori (MAP) estimation. The probability terms define an objective function of a MRF model whose goal is to detect contours and fine structures. The markovian segmentation problem is solved with a numerical optimization method. The scheme was applied to an Envisat/ASAR image over the Gulf of Mexico of May 9, 2010, when the oil spill was already fully developed. The final result was obtained with 51 recursion cycles, where, at each step, the segmentation consists of a 3-class label field (open sea and two oil slick thicknesses). Both the MRF model and the parameters of the stochastic optimization procedure will be provided, together with the area measurement of the two kinds of oil slick.

  17. PRESERVATION OF AVOCADO OIL WITH ELECTRIC FIELD TREATMENT

    OpenAIRE

    J.A. Ariza-Ortega; E. Ramírez-Moreno; M.E. Ramos-Cassellis; J. Díaz-Reyes

    2014-01-01

    The aim of this study was to analyze the effect of different conditions of electric field (voltage 3 kV cm-1, 60 Hz, 10 and 180 s; 720 Hz, 10 and 180 s) as method on preservation up to 365 days on oil extracted of the avocado pulp. Unsaturated fatty acid oxidation in crude avocado oil was analyzed by Fourier transform infrared spectroscopy technique in the mid infrared region and by quality parameters (acidity, peroxide and iodine). The electric field caused minimal changes on unsaturated fat...

  18. The Terra Nova oil field development

    Energy Technology Data Exchange (ETDEWEB)

    Bruce, G.C. [Petro-Canada, Inc., St. John' s, NF (Canada)

    2001-07-01

    Before expanding on the development of the Terra Nova oilfield, the author discussed the overall business strategy of Petro-Canada and identified where the Terra Nova and offshore Newfoundland oil have their place within this strategy. The principal basins and oilfields offshore Newfoundland were reviewed, then the emphasis shifted to rest on the Terra Nova development project. A whole range of topics were brought up, including the Floating Production, Storage and Offloading (FPSO) facility, the modules layout, the FPSO located at Bull Arm, and the floating production systems. The physical environment of the Grand Banks was highlighted, and the next few sections were devoted to the Terra Nova FPSO, FPSO and drill centres, the Turret General Arrangement, and Spider buoy including the disconnect/reconnect. The last four sections dealt with the animation of riser movement, the wellhead protection animation, Henry Goodrich, and operations readiness.

  19. Intisar ''D'' Oil Field, Libya

    Energy Technology Data Exchange (ETDEWEB)

    Brady, T.J.; Campbell, N.D.J.; Maher, C.E.

    1979-01-01

    The Intisar D Reef Oil Field was discovered by Occidental in Oct. 1967; the discovery well tested 75,000 bpod. The prospect was based on reflection seismic data, which indicated the presence of an isolated reef. The Intisar D Reef is roughly circular in plan and approximately 5 km in diameter. Its maximum thickness is 1262 ft (385 m). The reef is coral and algal with grain- and mud-supported biomicrites. The reef was full to spill point with a maximum oil column of 955 ft (291 m). The 40 API gravity oil has a paraffinic base and is low in sulfur. Cumulative oil production as of Sept. 30, 1978, totaled 777 million bbl ultimate recovery efficiency is expected to appraoch 75%. No pressure support was expected. Supplemental recovery operations that were begun early include pressure maintenance by both water and gas injection. The reservoir pressure is now maintained at the 4000-psi level, high enough for miscible gas displacement.

  20. Effective strategies for development of thermal heavy oil field facilities

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Ken; Lehnert-Thiel, Gunter [IMV Projects (Canada)

    2011-07-01

    In thermal heavy oil, a significant part of the capital has to be invested in field facilities and therefore strategies have to be implemented to optimize these costs. Field facilities consist of pipelines, earthworks and production pads whose purpose is to connect an oilsands reservoir to a central processing facility. This paper, presented by IMV Projects, a leading company in the thermal heavy oil field, highlights strategies to manage field facility lifecycle cost. Upfront planning should be done and the development of field facilities should be thought of as a long term infrastructure program rather than a stand-alone project. In addition, templates should be developed to save money and repeatability should be implemented to obtain a better prediction of the program's costs. The strategies presented herein allow major savings over the program's life by implementing an improved schedule and allowing refinements all along the program's course.

  1. Oil Spill Field Trial at Sea: Measurements of Benzene Exposure.

    Science.gov (United States)

    Gjesteland, Ingrid; Hollund, Bjørg Eli; Kirkeleit, Jorunn; Daling, Per; Bråtveit, Magne

    2017-07-01

    Characterize personal exposure to airborne hydrocarbons, particularly carcinogenic benzene, during spill of two different fresh crude oils at sea. The study included 22 participants taking part in an «oil on water» field trial in the North Sea. Two types of fresh crude oils (light and heavy) were released six times over two consecutive days followed by different oil spill response methods. The participants were distributed on five boats; three open sampling boats (A, B, and C), one release ship (RS), and one oil recovery (OR) vessel. Assumed personal exposure was assessed a priori, assuming high exposure downwind and close to the oil slick (sampling boats), low exposure further downwind (100-200 m) and upwind from the oil slick (main deck of RS and OR vessel), and background exposure indoors (bridge of RS/OR vessel). Continuous measurements of total volatile organic compounds in isobutylene equivalents were performed with photoionization detectors placed in all five boats. Full-shift personal exposure to benzene, toluene, ethylbenzene, xylenes, naphthalene, and n-hexane was measured with passive thermal desorption tubes. Personal measurements of benzene, averaged over the respective sample duration, on Day 1 showed that participants in the sampling boats (A, B, and C) located downwind and close to the oil slick were highest exposed (0.14-0.59 ppm), followed by participants on the RS main deck (0.02-0.10 ppm) and on the bridge (0.004-0.03 ppm). On Day 2, participants in sampling boat A had high benzene exposure (0.87-1.52 ppm) compared to participants in sampling boat B (0.01-0.02 ppm), on the ships (0.06-0.10 ppm), and on the bridge (0.004-0.01 ppm). Overall, the participants in the sampling boats had the highest exposure to all of the compounds measured. The light crude oil yielded a five times higher concentration of total volatile organic compounds in air in the sampling boats (max 510 ppm) than the heavy crude oil (max 100 ppm) but rapidly declined to

  2. The influence of magnetic fields on crude oils viscosity

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, Jose L.; Bombard, Antonio J. F. [Universidade Federal de Itajuba (UNIFEI), Itajuba, MG (Brazil). Instituto de Ciencias Exatas. Lab. de Reologia

    2009-07-01

    The crystallization of paraffin causes serious problems in the process of transportation of petroleum. This phenomenon increases the crude oil viscosity and implies an organic resin accumulation on pipeline wall, resulting in a reduced flux area or totally blocked pipes. One of the most challenging tasks for pipeline maintenance is solving this problem at low cost. Therefore, a method that inhibits the crystallization of paraffin and reduces the viscosity of crude oil could have many useful applications within the petroleum industry. Recent studies showed that magnetic fields reduce the Wax Appearance Temperature (WAT) and the viscosity of paraffin-based crude oil. For better understanding of this discovery, a series of tests was performed. This paper will show the influence of a DC magnetic field on rheological proprieties of three crude oils with different paraffin concentrations: a crude oil sample with 11 % p/p of paraffin concentration (sample 1); a crude oil sample with 6 % p/p of paraffin concentration (sample 2); a mixture of paraffin plus light crude oil with a total of 11 % p/p of paraffin concentration. These samples were placed in an electromagnet that generates a magnetic field of 1.3 Tesla. The samples' temperatures were conditioned around their Wax Appearance Temperature (WAT), and they were exposed to the field. As the viscosity of crude oil is very sensitive to the changes in temperature, it was ensured that the temperature has remained constant throughout the process. The sample 1 revealed a considerable reduction of viscosity: its original viscosity was 66 cP before magnetic field exposure, after that its viscosity was reduced to 39 cP. The other samples showed the same viscosity, before and after the magnetic field exposure. Since the samples 1 and 3 have the same paraffin concentrations, the viscosity reduction is not due only to the presence of paraffin; there must be other factors responsible for the interaction of sample 1 with the

  3. Microbial ecology of oil fields : introduction to the symposium

    Energy Technology Data Exchange (ETDEWEB)

    Voordouw, G. [Calgary Univ., AB (Canada). Dept. of Biology

    2000-07-01

    A brief synopsis was presented of how and why microbiology has become a topic of large interest in the petroleum industry to increase the volume and reduce the costs of production. Organic acids are formed when organic material is buried and oil is being formed. Subsurface waters having high concentration of these acids contain sulfate-reducing bacteria (SRB) which cause problems such as anaerobic, microbially influenced corrosion and souring. New nucleic acid hybridization technologies are being used to identify the SRB and sulfide-oxidizing bacteria (SOB) active in these processes. Oil fields can be injected with nitrate to overcome microbial souring. Some oil field bacteria use hydrocarbons as electron donors for their metabolism, but when oxygen is absent, either Fe{sup 3}, sulfate or nitrate is needed as an electron acceptor. Degradation of alkylbenzenes under iron-reducing, denitrifying and sulfate-reducing conditions has been established and the anaerobic respiration of alkanes has also been demonstrated. Sulfate-reducing, alkylbenzene or alkane oxidizers are the dominant organisms in storage tanks. Another important reason why microbiology has played a key role in fields where oil is produced by water injection, is the fact that resident or introduced bacteria can be successfully used for microbial enhanced oil recovery (EOR) by blocking the path of lease resistance.

  4. Tar Creek study, Sargent oil field, Santa Clara County, California

    Science.gov (United States)

    Wagner, David L.; Fedasko, Bill; Carnahan, J.R.; Brunetti, Ross; Magoon, Leslie B.; Lillis, Paul G.; Lorenson, T.D.; Stanley, Richard G.

    2002-01-01

    Field work in the Tar Creek area of Sargent oil field was performed June 26 to 28, 2000. The Santa Clara County study area is located in Sections, 30, 31, and 32, Township 11 South, Range 4 East, M.D.B&M; and in Sections 25 and 36, Township 11 South, Range 3 East, M.D.B.&M., north and south of Tar Creek, west of Highway 101. The work was a cooperative effort of the California Department of Conservation's Division of Oil, Gas, and Geothermal Resources (DOGGR), California Geological Survey (CGS), and the United States Geological Survey (USGS). The purpose of the project was to map the stratigraphy and geologic structure (David Wagner, CGS); sample oil for age dating (Les Magoon, USGS); and search for undocumented wells plus conduct a GPS survey of the area (Bill Fedasko, J.P. Carnahan, and Ross Brunetti, DOGGR)

  5. Microbial diversity of a high salinity oil field

    Energy Technology Data Exchange (ETDEWEB)

    Neria, I.; Gales, G.; Alazard, D.; Ollivier, B.; Borgomano, J.; Joulian, C.

    2009-07-01

    This work is a preliminary study to investigate the microbial diversity of an onshore oil field. It aim to compare results obtained from molecular methods, physicochemical analyses and cultivation. A core of 1150 m depth sediments ( in situ T=45 degree centigrade) was collected and immediately frozen with liquid nitrogen prior to further investigation. Macroscopic and Scanning Electron Microscopy analyses were performed. (Author)

  6. Seismic techniques of enhanced oil recovery: experimental and field results

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, O.L.; Simkin, E.M.; Chilingar, G.V.; Gorfunkel, M.V.; Robertson, J.O. Jr.

    2002-09-15

    Application of secondary and tertiary oil recovery techniques during late field development stages usually yields poor results. The reasons are principally due to the low efficiency of these technologies, probably because the gravity and capillary forces are not properly considered. Improved efficiency for hydrocarbon recovery produced by seismic vibration is discussed. (author)

  7. Environmental Protection of Oil and Gas Fields 1997 Subscriptions Welcome

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    @@ ENTIRONMENTAL PROTECTION OF OIL AND GAS FIELDS is a scientific and technical periodical in Chinese with abstracts in English. jointly operated by China Petroleum Planning and Engineering Institute and Technical Supervision, Safety and Environmental Protection Bureau, CNPC and publicly distributed at home and abroad.

  8. Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field.

    Science.gov (United States)

    Al-Sayegh, Abdullah; Al-Wahaibi, Yahya; Al-Bahry, Saif; Elshafie, Abdulkadir; Al-Bemani, Ali; Joshi, Sanket

    2015-09-16

    Biodegradation is a cheap and environmentally friendly process that could breakdown and utilizes heavy crude oil (HCO) resources. Numerous bacteria are able to grow using hydrocarbons as a carbon source; however, bacteria that are able to grow using HCO hydrocarbons are limited. In this study, HCO degrading bacteria were isolated from an Omani heavy crude oil field. They were then identified and assessed for their biodegradation and biotransformation abilities under aerobic and anaerobic conditions. Bacteria were grown in five different minimum salts media. The isolates were identified by MALDI biotyper and 16S rRNA sequencing. The nucleotide sequences were submitted to GenBank (NCBI) database. The bacteria were identified as Bacillus subtilis and B. licheniformis. To assess microbial growth and biodegradation of HCO by well-assay on agar plates, samples were collected at different intervals. The HCO biodegradation and biotransformation were determined using GC-FID, which showed direct correlation of microbial growth with an increased biotransformation of light hydrocarbons (C12 and C14). Among the isolates, B. licheniformis AS5 was the most efficient isolate in biodegradation and biotransformation of the HCO. Therefore, isolate AS5 was used for heavy crude oil recovery experiments, in core flooding experiments using Berea core plugs, where an additional 16 % of oil initially in place was recovered. This is the first report from Oman for bacteria isolated from an oil field that were able to degrade and transform HCO to lighter components, illustrating the potential use in HCO recovery. The data suggested that biodegradation and biotransformation processes may lead to additional oil recovery from heavy oil fields, if bacteria are grown in suitable medium under optimum growth conditions.

  9. Evolution of the Moxizhuang Oil Field, Central Junggar Basin, Northwest China

    Institute of Scientific and Technical Information of China (English)

    Zou Huayao; Zhang Yuanchun; Liu Jianzhang; Shi Jiannan

    2008-01-01

    Current oil saturation in the Moxizhuang (莫西庄) Oil Field in central Janggar (准噶尔) basin was evaluated by logging interpretation and measured on core samples, and the paleo-oil saturation in both the pay zones and water zones was investigated by graln-containing-oil inclusion (GOI) analysis.The pay zones in this field have low oil saturation and display low resistivity and small contrast between pay zones and water zones, and are classified as low-porosity, low oil saturation, and low resistivity reservoirs. Both the current low oil-saturation pay zones and the water zones above 4 365 m have high GOI values (up to 38%), suggesting high paleo-oil saturation. The significant difference between current oil saturation from both logging interpretation and core sample measurement and paleo-oil saturation indicated by GOI analysis suggests that this low oil-saturation field evolved from a high oil-saturation pool. Lateral re-migration and spill of formally trapped oil owing to changes in structural configuration since Neogene was the most plausible mechanism for oil loss in the Moxizhuang Oil Field.The combined effects of differential accumulation in the charge phase and the differential re-migration and spill of accumulated oil in Neogene are responsible for the complicated correlation between residual oil saturation and porosity/permeability of the reservoir sandstones and the distribution of low oil-saturation pay zones and paleo-oil zones (current water zones).

  10. Bird Mortality in Oil Field Wastewater Disposal Facilities

    Science.gov (United States)

    Ramirez, Pedro

    2010-11-01

    Commercial and centralized oilfield wastewater disposal facilities (COWDFs) are used in the Western United States for the disposal of formation water produced from oil and natural gas wells. In Colorado, New Mexico, Utah, and Wyoming, COWDFs use large evaporation ponds to dispose of the wastewater. Birds are attracted to these large evaporation ponds which, if not managed properly, can cause wildlife mortality. The U.S. Fish and Wildlife Service (USFWS) and the U.S. Environmental Protection Agency (EPA) conducted 154 field inspections of 28 COWDFs in Wyoming from March 1998 through September 2008 and documented mortality of birds and other wildlife in 9 COWDFs. Of 269 bird carcasses recovered from COWDFs, grebes (Family Podicipedidae) and waterfowl (Anatidae) were the most frequent casualties. Most mortalities were attributed to oil on evaporation ponds, but sodium toxicity and surfactants were the suspected causes of mortality at three COWDFs. Although the oil industry and state and federal regulators have made much progress in reducing bird mortality in oil and gas production facilities, significant mortality incidents continue in COWDFs, particularly older facilities permitted in the early 1980’s. Inadequate operation and management of these COWDFs generally results in the discharge of oil into the large evaporation ponds which poses a risk for birds and other wildlife.

  11. Agroecological practices in oil palm plantations: examples from the field

    Directory of Open Access Journals (Sweden)

    Bessou Cécile

    2017-05-01

    Full Text Available Palm oil is nowadays the first vegetable oil consumed worldwide. Given the world population growth and the increasing demand in fat for food and fuel, the increase in oil palm production is expected to continue. It is thus important to find ways of reducing the ecological impact of oil palm plantations at both the agroecosystem and the mill supply area levels, by improving agricultural practices and land uses. This is where agroecology can play a very critical role. The present article gathers short stories on agroecological practices currently taking place in oil palm plantations in South-East Asia. Such stories notably highlight the importance of the various palm co-products and how appropriate recycling strategies can allow for reducing external inputs to both the field and the mill. Besides limiting environmental impacts thanks to such savings, several co-products used as organic amendments can even help to maintain or enhance soil quality. Other stories explored agroecological practices developed for biological controls. Although integrated pest management has been applied in palm plantations for a long time, the underlying mechanisms are still not fully deciphered and practices still need to be improved. More knowledge is needed in order to better account for the holistic role of biodiversity and arbitrate trade-offs between practices and ecosystem services, at both plantation and landscape levels.

  12. Development and Prospects for Energy Saving Technology in Oil & Gas Fields, China

    Institute of Scientific and Technical Information of China (English)

    Chen Youwang; Yu Jiqing; Lin Ran; Zhu Yingru; Liu Feijun

    2010-01-01

    @@ Current state of energy saving technology in China's oil and gas fields System optimization To optimize the oil-gas field surface engineering system is critical to improve the efficiency of oil and gas field system.To adapt to the changes in development of old oil and gas fields, all oilfields are adjusted and reconstructed;a set of optimized and simplified modes and technical measures are developed.

  13. Clay-oil droplet suspensions in electric fields

    Science.gov (United States)

    Rozynek, Zbigniew; Fossum, Jon Otto; Kjerstad, Knut; Mikkelsen, Alexander; Castberg, Rene

    2012-02-01

    Silicone oil droplets containing synthetic smectite clay submerged in immiscible organic oil have been studied by observing clay particle movement and oil circulation when an electric field is applied. Results show how electric field strength, dielectric and electrorheological properties as well as electrohydrodynamics determine the fluid flow and clay particle formation. In a presence of the DC electric fields the clay particles formed a ribbon-like structure onto the inner surface of the droplet. The structure consists of short chain-like clay elements orienting parallel to the electric field direction. It is suggested that a combination of two phenomena, namely the induced viscous flow (electrohydrodynamic effect) and the polarization of the clay particles (dielectric effect), contribute to the ribbon-like structure formation. -/abstract- References [1] G. Taylor, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences 291 (1966) 159--166. [2] J. R. Melcher and G. I. Taylor, Annual Review of Fluid Mechanics 1 (1969) 111--146. [3] H. Sato, N. Kaji, T. Mochizuki, and Y. H. Mori, Physics of Fluids 18 (2006) 127101. [4] D. A. Saville, Annual Review of Fluid Mechanics 29 (1997) 27--64. [5] J. O. Fossum, Y. M'eheust, K. P. S. Parmar, K. D. Knudsen, K. J. Måløy, and D. M. Fonseca Europhysics Letters 74

  14. Third One-million-ton Oil Field in Junggar Basin Will Come into Being

    Institute of Scientific and Technical Information of China (English)

    Tian Jun; Li Songguo

    2002-01-01

    @@ PetroChina Xinjiang Oil FieldCompany is accelerating its efforts for construction of the third 1-million-ton oil field in Junggar basin - Luliang oil field located in the hinterland of the basin, which was found in 2000.

  15. Detection of olive oil adulteration by low-field NMR relaxometry and UV-Vis spectroscopy upon mixing olive oil with various edible oils

    Directory of Open Access Journals (Sweden)

    S. Ok

    2017-03-01

    Full Text Available Adulteration of olive oil using unhealthy substitutes is considered a threat for public health. Low-field (LF proton (1H nuclear magnetic resonance (NMR relaxometry and ultra-violet (UV visible spectroscopy are used to detect adulteration of olive oil. Three different olive oil with different oleoyl acyl contents were mixed with almond, castor, corn, and sesame oils with three volumetric ratios, respectively. In addition, Arbequina olive oil was mixed with canola, flax, grape seed, peanut, soybean, and sunflower seed oils with three volumetric ratios. Transverse magnetization relaxation time (T2 curves were fitted with bi-exponential decaying functions. T2 times of each mixture of olive oils and castor oils, and olive oils and corn oils changed systematically as a function of volumetric ratio. To detect the adulteration in the mixtures with almond and sesame oils, both LF 1H NMR relaxometry and UV-Vis spectroscopy were needed, where UV-Vis-spectroscopy detected the adulteration qualitatively. In the mixtures of Arbequina olive oil and flax, peanut, soybean, and sunflower seed oils, both T21 and T22 values became longer systematically as the content of the olive oil was decreased. The unique UV-Vis maximum absorbance of flax oil at 320.0 nm shows the adulteration of olive oil qualitatively.

  16. An objective estimation of impurities in oil field stagnant waters

    Energy Technology Data Exchange (ETDEWEB)

    Abashev, R.G.; Runets, S.A.

    1984-01-01

    Studies and an analysis of published materials are used to establish the predominant role of the mechanical impurities of various origins covered by layers of the heavy components of petroleum products in reducing the injectivity of injection wells for injecting stagnant waters containing concretions. A method is proposed for determining the impurities in the oil field stagnant waters used for flooding; this method makes it possible to obtain more reliable results on the concentration of the concretions responsible in such conditions for the drop in the injectivity of the formation reservoirs. A comparative evaluation of the results from an analysis of the impurities determined by the existing method and the proposed method is given. This method is useful in oil field laboratories in the systematic quality control over injected waters.

  17. The Application of BP Neural Network In Oil-Field

    Directory of Open Access Journals (Sweden)

    Pei-Ying ZHANG

    2013-09-01

    Full Text Available Aiming at the situation that many techniques of production performance analysis acquire lots of data and are expensive considering the computational and human resources, and their applications are limited, this paper puts forward a new method to analyze the production performance of oil-field based on the BP neural network. It builds a dataset with some available measured data such as well logs and production history, then, builds a field-wide production model by neural network technique, a model will be used to predict. The technique is verified, which shows that the predicted results are consistent with the maximum error of rate of oil production lower than 7% and maximum error of rate of water production lower than 5%, having certain application and research value.  

  18. Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

    2002-09-30

    The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. It was hoped that the successful application of these technologies would result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs.

  19. Field observations of artificial sand and oil agglomerates

    Science.gov (United States)

    Dalyander, Patricia (Soupy); Long, Joseph W.; Plant, Nathaniel G.; McLaughlin, Molly R.; Mickey, Rangley C.

    2015-01-01

    Oil that comes into the surf zone following spills, such as occurred during the 2010 Deepwater Horizon (DWH) blowout, can mix with local sediment to form heavier-than-water sand and oil agglomerates (SOAs), at times in the form of mats a few centimeters thick and tens of meters long. Smaller agglomerates that form in situ or pieces that break off of larger mats, sometimes referred to as surface residual balls (SRBs), range in size from sand-sized grains to patty-shaped pieces several centimeters (cm) in diameter. These mobile SOAs can cause beach oiling for extended periods following the spill, on the scale of years as in the case of DWH. Limited research, including a prior effort by the U.S. Geological Survey (USGS) investigating SOA mobility, alongshore transport, and seafloor interaction using numerical model output, focused on the physical dynamics of SOAs. To address this data gap, we constructed artificial sand and oil agglomerates (aSOAs) with sand and paraffin wax to mimic the size and density of genuine SOAs. These aSOAs were deployed in the nearshore off the coast of St. Petersburg, Florida, during a field experiment to investigate their movement and seafloor interaction. This report presents the methodology for constructing aSOAs and describes the field experiment. Data acquired during the field campaign, including videos and images of aSOA movement in the nearshore (1.5-meter and 0.5-meter water depth) and in the swash zone, are also presented in this report.

  20. Developing High Water-cut Oil Fields Deeply to Enhance Their Oil Recovery

    Institute of Scientific and Technical Information of China (English)

    Han Dakuang

    1994-01-01

    @@ There are 283 developed oil fields in China onshore area by the end of 1993. Most of them are in the later development stage with high water cut. The overall average water cut in these oilfields reaches 80.4%.Some old ones, such as Shengtuo, Gudao and Zhengdong,which have been put on production since 60's or 70's, have a water cut of higher than 90%and are in the extra high water-cut development stage. The recovery factors of these oilfields in terms of the recoverable reserves, which is 63.1%on average and even higher than 80% in some old fields, are also high. A lot of field data show that the distribution of oil and water in the reservoir exhibits new features differing from that in the earlier development stage. Because of the serious interlayer and intralayer heterogeneity of non--marine sandbodies both horizontally and vertically, and the complicated structural features due to the cross cutting of numerous faults, the distribution of the remaining oil in the case of such high recovery and high water cut is in a very dispersed state forming a very complex picture just like the stars in the sky. However some regularities and some relatively abundant regions still exist.

  1. The value of flexibility in offshore oil field development projects

    Energy Technology Data Exchange (ETDEWEB)

    Lund, Morten Wattengaard

    1997-12-31

    Offshore oil field development projects often face substantial uncertainties and the operator`s ability to take corrective actions is very important. The main objective of this thesis was to identify the value of flexibility in such projects. Estimates obtained from exploratory wells can be dependent through common information. The effect of stochastic dependence was illustrated by an analytical model, where the dependence was expressed in terms of correlation between estimate errors. It was found that a high degree of correlation might distort the benefit of additional exploration. A prototype that covered the major phases of the project was developed to study the value of flexibility. The prototype was a Markov decision process, solved by stochastic dynamic programming. Based on discussions with Norwegian oil companies, three uncertain variables were addressed: the reservoir volume, the well rate, and the oil price. Simple descriptions were used to mimic the uncertainty. The reservoir was thus depicted as a tank model, and the well rate and oil prices were assumed to follow Markov processes. Flexibility was restricted to managerial as opposed to financial flexibility. Application of the prototype to a case study, based on an ongoing field development, showed that flexibility might be of considerable value to the project. In particular, capacity flexibility and initiation flexibility were identified as important aspects of the development. The results also emphasized the importance of a joint assessment, as the values of different flexibility types are not additive. In conclusion, the proposed model motivates further development of the decision support system presently available. Future decision making should therefore be made within a framework that gives consideration to flexibility. 129 refs., 46 figs., 23 tabs.

  2. Saudi Aramco: Oil to a Thirsty Market - International Cooperation Brings New Oil Field on Quickly

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajmi, Ali

    2007-07-01

    In response to high oil demand in 2004, Saudi Aramco committed to build facilities for the 500,000 BOPD Khursaniyah Oil Field in only 34 months from the start of preliminary engineering to startup. The project schedule was six months faster than any previous project, in the most resource competitive market the oil business has ever seen. The execution of this project required a new contract strategy, novel engineering and construction methods, and international cooperation from EPC firms and manufacturers. The project is also building a new one billion SCF per day gas plant receiving gas from five different sources with varying pressure and H2S content, along with huge water supply and injection facilities, oil gathering lines, and product distribution lines. To execute the project in this short time frame, a temporary construction city for 30,000 men has been constructed in the desert. This city has workers from all over 30 countries, speaking more than 15 languages, all focused on achieving one goal - on time completion of the most complex project ever done in Saudi Arabia. The paper will focus on the unique challenges of managing a city of this size that lasts for only 24 months. (auth)

  3. Saudi Aramco: Oil to a Thirsty Market - International Cooperation Brings New Oil Field on Quickly

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajmi, Ali

    2007-07-01

    In response to high oil demand in 2004, Saudi Aramco committed to build facilities for the 500,000 BOPD Khursaniyah Oil Field in only 34 months from the start of preliminary engineering to startup. The project schedule was six months faster than any previous project, in the most resource competitive market the oil business has ever seen. The execution of this project required a new contract strategy, novel engineering and construction methods, and international cooperation from EPC firms and manufacturers. The project is also building a new one billion SCF per day gas plant receiving gas from five different sources with varying pressure and H2S content, along with huge water supply and injection facilities, oil gathering lines, and product distribution lines. To execute the project in this short time frame, a temporary construction city for 30,000 men has been constructed in the desert. This city has workers from all over 30 countries, speaking more than 15 languages, all focused on achieving one goal - on time completion of the most complex project ever done in Saudi Arabia. The paper will focus on the unique challenges of managing a city of this size that lasts for only 24 months. (auth)

  4. Map Service Showing Geology, Oil and Gas Fields, and Geologic Provinces of Europe including Turkey

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digitally compiled map includes geology, oil and gas fields, and geologic provinces of Europe. The oil and gas map is part of a worldwide series released on...

  5. Map Service Showing Geology, Oil and Gas Fields, and Geologic Provinces of South America

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digitally compiled map includes geology, oil and gas fields, and geologic provinces of South America. The oil and gas map is part of a worldwide series released...

  6. Delineating Concealed Faults within Cogdell Oil Field via Earthquake Detection

    Science.gov (United States)

    Aiken, C.; Walter, J. I.; Brudzinski, M.; Skoumal, R.; Savvaidis, A.; Frohlich, C.; Borgfeldt, T.; Dotray, P.

    2016-12-01

    Cogdell oil field, located within the Permian Basin of western Texas, has experienced several earthquakes ranging from magnitude 1.7 to 4.6, most of which were recorded since 2006. Using the Earthscope USArray, Gan and Frohlich [2013] relocated some of these events and found a positive correlation in the timing of increased earthquake activity and increased CO2 injection volume. However, focal depths of these earthquakes are unknown due to 70 km station spacing of the USArray. Accurate focal depths as well as new detections can delineate subsurface faults and establish whether earthquakes are occurring in the shallow sediments or in the deeper basement. To delineate subsurface fault(s) in this region, we first detect earthquakes not currently listed in the USGS catalog by applying continuous waveform-template matching algorithms to multiple seismic data sets. We utilize seismic data spanning the time frame of 2006 to 2016 - which includes data from the U.S. Geological Survey Global Seismographic Network, the USArray, and the Sweetwater, TX broadband and nodal array located 20-40 km away. The catalog of earthquakes enhanced by template matching reveals events that were well recorded by the large-N Sweetwater array, so we are experimenting with strategies for optimizing template matching using different configurations of many stations. Since earthquake activity in the Cogdell oil field is on-going (a magnitude 2.6 occurred on May 29, 2016), a temporary deployment of TexNet seismometers has been planned for the immediate vicinity of Cogdell oil field in August 2016. Results on focal depths and detection of small magnitude events are pending this small local network deployment.

  7. Premium performance heating oil - Part 2, Field trial results

    Energy Technology Data Exchange (ETDEWEB)

    Jetter, S.M.; Hoskin, D.; McClintock, W.R. [Mobil Oil Corp., Paulsboro, NJ (United States)] [and others

    1996-07-01

    Limited field trial results of a heating oil additive package developed to minimize unscheduled maintenance indicate that it achieves its goal of keeping heating oil systems cleaner. The multifunctional additive package was developed to provide improved fuel oxidation stability, improved corrosion protection, and dispersency. This combination of performance benefits was chosen because we believed it would retard the formation of sludge, as well as allow sludge already present to be carried through the system without fouling the fuel system components (dispersency should keep sludge particles small so they pass through the filtering system). Since many unscheduled maintenance calls are linked to fouling of the fuel filtering system, the overall goal of this technology is to reduce these maintenance calls. Photographic evidence shows that the additive package not only reduces the amount of sludge formed, but even removes existing sludge from filters and pump strainers. This {open_quotes}clean-up{close_quotes} performance is provided trouble free: we found no indication that nozzle/burner performance was impaired by dispersing sludge from filters and pump strainers. Qualitative assessments from specific accounts that used the premium heating oil also show marked reductions in unscheduled maintenance.

  8. The value of offshore field experiments in oil spill technology development for Norwegian waters.

    Science.gov (United States)

    Faksness, Liv-Guri; Brandvik, Per Johan; Daling, Per S; Singsaas, Ivar; Sørstrøm, Stein Erik

    2016-10-15

    The blowout on the Ekofisk field in the North Sea in 1977 initiated R&D efforts in Norway focusing on improving oil spill contingency in general and more specifically on weathering processes and modeling drift and spreading of oil spills. Since 1978, approximately 40 experimental oil spills have been performed under controlled conditions in open and ice covered waters in Norway. The importance of these experimental oil spills for understanding oil spill behavior, development of oil spill and response models, and response technologies are discussed here. The large progress within oil spill R&D in Norway since the Ekofisk blowout has been possible through a combination of laboratory testing, basin studies, and experimental oil spills. However, it is the authors' recommendation that experimental oil spills still play an important role as a final validation for the extensive R&D presently going on in Norway, e.g. deep-water releases of oil and gas.

  9. Field testing the prototype BNL fan-atomized oil burner

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.; Celebi, Y. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    BNL has developed a new oil burner design referred to as the Fan Atomized burner System. The primary objective of the field study was to evaluate and demonstrate the reliable operation of the Fan Atomized Burner. The secondary objective was to establish and validate the ability of a low firing rate burner (0.3-0.4 gph) to fully satisfy the heating and domestic hot water load demands of an average household in a climate zone with over 5,000 heating-degree-days. The field activity was also used to evaluate the practicality of side-wall venting with the Fan Atomized Burner with a low stack temperature (300F) and illustrate the potential for very high efficiency with an integrated heating system approach based on the Fan Atomized Burner.

  10. Planning the sampling of a condensed-gas field with an oil fringe at the Benoi field

    Energy Technology Data Exchange (ETDEWEB)

    Siuniaev, Y.K.; Trubaev, V.L.

    1981-01-01

    In order to obtain data for determining gas, condensate and oil reserves, planning field development, and monitoring the operation of condensed gas wells in fields, a system of gas-hydrodynamic and specialized studies is developed.

  11. Low-field NMR determinations of the properties of heavy oils and water-in-oil emulsions.

    Science.gov (United States)

    LaTorraca, G A; Dunn, K J; Webber, P R; Carlson, R M

    1998-01-01

    Low-field (magnetic resonance (NMR) well-logging measurements are beginning to be used to obtain estimates of oil viscosity in situ. To build an interpretive capability, we made laboratory T1 and T2 relaxation measurements on a suite of high-density, high-viscosity crude oils. These measurements were also used to estimate oil viscosity and water fraction from T1 and T2 measurements on stable, water-in-oil emulsions. High-density, high-viscosity oils have components that relax faster than can be measured by nuclear magnetic resonance logging tools. This requires corrections to T2 logging measurements for accurate estimates of oil saturation and porosity.

  12. Estimation of Reserves of Tula Horizon Oil Deposits of Severo-Yurmanskoye Field, Perm Kray

    Directory of Open Access Journals (Sweden)

    V I Nabiullin

    2015-09-01

    Full Text Available This article presents an estimation of reserves of the Tula horizon oil-bearing layers Tl2-a and Tl2-b at the Severo-Yurmanskoye oil field. Research was carried out in order to prospect the unestimated oil reserves at the previously drilled but not commercially producing areas of Perm kray. The opportunity of reserve calculation for this oil field was provided by the sufficient oil encroachment rate achieved during testing of Tula horizon layers in the borehole 174, reliable mapping of oil-bearing horizons using seismic and borehole data, existence of updated stratigraphic information, results of study of uniformity of oil-bearing layers throughout the area of the Severo-Yurmanskoye oil field, reliable estimate of the position of water-oil contact, defining the effective oil-bearing thickness of oil-bearing layers using results of borehole geophysical survey, study of lithological composition and reservoir  properties, study of physical and chemical properties of oil in borehole and in laboratory, and reliability of statistical evaluation of oil recovery factor.

  13. Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

    2002-09-30

    The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies would result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs.

  14. Oil field waste disposal in salt caverns: An information website

    Energy Technology Data Exchange (ETDEWEB)

    Tomasko, D.; Veil, J. A.

    1999-12-10

    Argonne National Laboratory has completed the construction of a Website for the US Department of Energy (DOE) that provides detailed information on salt caverns and their use for disposing of nonhazardous oil field wastes (NOW) and naturally occurring radioactive materials (NORM). Specific topics in the Website include the following: descriptions of salt deposits and salt caverns within the US, salt cavern construction methods, potential types of wastes, waste emplacement, regulatory issues, costs, carcinogenic and noncarcinogenic human health risks associated with postulated cavern release scenarios, new information on cavern disposal (e.g., upcoming meetings, regulatory issues, etc.), other studies supported by the National Petroleum Technology Office (NPTO) (e.g., considerations of site location, cavern stability, development issues, and bedded salt characterization in the Midland Basin), and links to other associated Web sites. In addition, the Website allows downloadable access to reports prepared on the topic that were funded by DOE. Because of the large quantities of NOW and NORM wastes generated annually by the oil industry, information presented on this Website is particularly interesting and valuable to project managers, regulators, and concerned citizens.

  15. Detection of Virgin Olive Oil Adulteration Using Low Field Unilateral NMR

    Directory of Open Access Journals (Sweden)

    Zheng Xu

    2014-01-01

    Full Text Available The detection of adulteration in edible oils is a concern in the food industry, especially for the higher priced virgin olive oils. This article presents a low field unilateral nuclear magnetic resonance (NMR method for the detection of the adulteration of virgin olive oil that can be performed through sealed bottles providing a non-destructive screening technique. Adulterations of an extra virgin olive oil with different percentages of sunflower oil and red palm oil were measured with a commercial unilateral instrument, the profile NMR-Mouse. The NMR signal was processed using a 2-dimensional Inverse Laplace transformation to analyze the transverse relaxation and self-diffusion behaviors of different oils. The obtained results demonstrated the feasibility of detecting adulterations of olive oil with percentages of at least 10% of sunflower and red palm oils.

  16. Geochemical Specific Characters of the Oil and the Origin of the Oil and Gas Fields

    Science.gov (United States)

    Gottikh, Rimma; Pisotskiy, Bogdan; Plotnikova, Irina

    2010-05-01

    and porous rocks. The high metal content of carbonaceous substances and their compositional variations governed by homogenisation temperatures of the inclusions suggest that they are not the products of the decomposition of oil fields. The constant presence of uranium in the fluid and its differentiation products allows the tracing of the systems' migration ways from the crystalline basement to oil-saturated reservoir zones of the sedimentary cover The known geochemical properties of bitumen and oil - high platinum content, specific distributions of rare earth elements, that are not characteristic of the upper crust formations, as well as 143Nd/144Nd and 87Sr/86Sr isotopic compounds, which are out of balance with the organic matter of sedimentary rocks - suggest that hydrocarbons are accumulated in the presence of cooling high-alkalinity mafite-ultramafite intrusions. This logically corresponds to the distribution of seismic anomalies and magnetic and gravity fields in the consolidated crust below the various petroleum fields (for example, South Tatarstan and Nepsky arches of the Romashkino and Verkhne-Chonskoye oil fields). The acquired geochemical and thermodynamic characteristics of the reduced fluids and their differentiation products from the crystalline basement and the sedimentary cover of the southern Siberian and eastern East European platforms indicate that these were formed outside of the sedimentary cover and that the migration was directed upwards. The analysis of the magmatic evolution on platforms reveals its alkaline trend due to the impeded degassing of magmatic sources at depth and the inflow of new doses of alkaline fluids or melts into them. Further evolution of the zones of partial melting of the substratum led, in the authors' view, to the generation of oil-forming fluids and their transportation into the Earth's upper crust. Their interaction with the surrounding rocks in turn led to the formation of oil accumulations. Thus, oil is the product

  17. Geometric Seismic Attributes of Boca de Jaruco Oil Field

    Directory of Open Access Journals (Sweden)

    Yamicela Tamayo López

    2013-06-01

    Full Text Available This paper focuses in determining the Geometric Seismic Attributes in the central block of Mouth ofJaruco oil field to decrease the uncertainty in the structural design. The three dimensions seismic datacollected and depth migration processing results were used and was defined that the surface isassociated to the main reserve. A Geometric Attributes maps elaboration (Azimuth, Dip, Curvature andRoughness work flow was developed; and was able to determine structural elements, where traditionalseismic data were not always able to demonstrate a confinable image of the geological structure. Thisstructure includes three structures between 1122 and 1200 m in depth. The Azimuth Attribute differentiatesthe southern flank from the northern flank; and defined accurately the top of the structure. The DipAttribute indicates values of layers inclination between 5 and 30º, the structure top with lowers valuesand the flanks with higher values, mainly to the south. Curvature and Roughness attributes reveal theareas of faults or channels.

  18. Calculation of oil production performance of the large giant oil fields in the world: based upon oil fields depletion model; Yuden gentai model ni yoru sekai no ogata kyodai yuden no seisan kyodo ni kansuru ichishisan

    Energy Technology Data Exchange (ETDEWEB)

    Nomoto, S. [Japan Oil Development Co. Ltd., Tokyo (Japan); Fujita, K. [The University of Tokyo, Tokyo (Japan)

    1997-05-01

    Data for large giant oil fields with minable reserves of one billion barrels or more were accumulated to structure a new oil field depletion model and estimate production in each oil field. As a result of analyzing events recognized in large giant oil fields, necessity was made clear to correct the conventional oil depletion model. The newly proposed model changes definitions on the depletion period of time, depletion rate, build-up production (during a time period in which production rate increases) and production in a plateau (a time period in which production becomes constant). Two hundred and twenty-five large giant oil fields were classified into those in a depletion period, an initial development phase, and a plateau period. The following findings were obtained as a result of trial calculations using the new model: under an assumption of demand growth rate of 1.5%, oil field groups in the initial development phase will reach the plateau production in the year 2002, and oil fields in the depletion period will continue production decline, hence the production amount after that year will slow down. Because the oil field groups in the plateau period will shift into decline in 2014, the overall production will decrease. The year 2014 is about ten years later than the estimation given recently by Campbell. Undiscovered resources are outside these discussions. 11 refs., 9 figs., 2 tabs.

  19. Changqing Becomes China's Second Largest Oil and Gas Field

    Institute of Scientific and Technical Information of China (English)

    Peng Xufeng

    2010-01-01

    @@ Realizing great-leap-forward growth of oil and gas reserves,production Changqing Oilfield has created miracles from rapid growth to great-leap-forward development when China's oil and gas output increased slowly.

  20. Argentina Hopes for A Big Payoff in Its Shale Oil Field Discovery

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    @@ Just east of Argentina's Andean foothills, an oil field called the Vaca Muerta, "dead cow" in English, has finally come to life.In May, the Argentine oil company YPF announced that it had found 150 million barrels of oil in the Patagonian field, and President Cristina Fernandez de Kirchner rushed onto national television to praise the discovery as something that could give new impetus to the country's long-stagnant economy.

  1. Cleaning method of the oil field wastewater treatment by UF process

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This article introduces experiments and researches of polysulphone ultrafiltration membrane' s effect on oil field polluted water and approaches renewing oil field polluted water and approaches renewing of membrane' s flux by different detergents and cleaning method. Good result has been achieved by doing experiments and the renewal rate of membrane is over 90%.

  2. The Linguado, Carapeba, Vermelho, and Marimba giant oil fields, Campos basin, offshore Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Stank, C.V.; Esteves, F.R.; Martins, C.C.; Cruz, W.M.; Da Silva Barroso, A.; Horschutz, P.M.C. (Petrobras, Rio de Janeiro (Brazil))

    1990-09-01

    About 40 hydrocarbon accumulations have been discovered in the Campos basin in the period 1978-1984, including four giant fields in shallow to moderate water depths. The Linguado oil field is located on the extreme south of the producing area of the Campos basin. The pool was discovered in May 1978. The reservoir rocks occur between 1,700 and 3,000 m, and are constituted by fractured Neocomian basalts, Barremian pelecypod coquinas, Albian oolitic calcarenites, and, secondarily, by some Cretaceous turbidite sandstones. The main reservoir is formed by coquinas, which contain 76% of the total recoverable oil volume estimated at 104.6 million bbl. The field is located on a regional high and the accumulation is strongly controlled by stratigraphic and diagenetic factors. High-quality oil is produced through a floating producing system (FPS), and the cumulative oil production amounts to 63.8 million bbl. The Carapeba and Vermelho oil fields are situated in the northern limit of the Campos basin producing area and, together with the smaller Pargo field, make up the so-called Northeast Pole of Campos basin. Carapeba field was discovered in February 1982, and has an estimated recoverable oil volume of 127.8 million bbl. Production comes mainly from two Upper Cretaceous turbidite sandstone reservoirs. The Vermelho field in December 1982, and its main reservoir is formed by a massive Eocene turbidite sandstone. The estimated recoverable oil volume amounts to 119.7 million bbl. Both Carapeba and Vermelho fields are structural traps associated with the development of subtle anticlines caused by salt movements. The fields are gradually being put on stream through five fixed platforms installed in water depths ranging from 70 to 90 m. The Marimba field, discovered in March 1984, drilled in a water depth of 383 m, is considered the first deep-water oil strike in the Campos basin. The field has an estimated recoverable oil volume of 115 million bbl of good-quality oil.

  3. Application of oil-field well log interpretation techniques to the Cerro Prieto Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Ershaghi, I.; Phillips, L.B.; Dougherty, E.L.; Handy, L.L.

    1979-10-01

    An example is presented of the application of oil-field techniques to the Cerro Prieto Field, Mexico. The lithology in this field (sand-shale lithology) is relatively similar to oil-field systems. The study was undertaken as a part of the first series of case studies supported by the Geothermal Log Interpretation Program (GLIP) of the US Department of Energy. The suites of logs for individual wells were far from complete. This was partly because of adverse borehole conditions but mostly because of unavailability of high-temperature tools. The most complete set of logs was a combination of Dual Induction Laterolog, Compensated Formation Density Gamma Ray, Compensated Neutron Log, and Saraband. Temperature data about the wells were sketchy, and the logs had been run under pre-cooled mud condition. A system of interpretation consisting of a combination of graphic and numerical studies was used to study the logs. From graphical studies, evidence of hydrothermal alteration may be established from the trend analysis of SP (self potential) and ILD (deep induction log). Furthermore, the cross plot techniques using data from density and neutron logs may help in establishing compaction as well as rock density profile with depth. In the numerical method, R/sub wa/ values from three different resistivity logs were computed and brought into agreement. From this approach, values of formation temperature and mud filtrate resistivity effective at the time of logging were established.

  4. Quantitative calculation of GOR of complex oil-gas-water systems with logging data: A case study of the Yingdong Oil/Gas Field in the Qaidam Basin

    OpenAIRE

    2014-01-01

    In the Yingdong Oil/Gas Field of the Qaidam Basin, multiple suites of oil-gas-water systems overlie each other vertically, making it difficult to accurately identify oil layers from gas layers and calculate gas-oil ratio (GOR). Therefore, formation testing and production data, together with conventional logging, NMR and mud logging data were integrated to quantitatively calculate GOR. To tell oil layers from gas layers, conventional logging makes use of the excavation effect of compensated ne...

  5. Computer simulation of nonstationary thermal fields in design and operation of northern oil and gas fields

    Energy Technology Data Exchange (ETDEWEB)

    Vaganova, N. A., E-mail: vna@imm.uran.ru [Institute of Mathematics and Mechanics of Ural Branch of Russian Academy of Sciences, Ekaterinburg (Russian Federation); Filimonov, M. Yu., E-mail: fmy@imm.uran.ru [Ural Federal University, Ekaterinburg, Russia and Institute of Mathematics and Mechanics of Ural Branch of Russian Academy of Sciences, Ekaterinburg (Russian Federation)

    2015-11-30

    A mathematical model, numerical algorithm and program code for simulation and long-term forecasting of changes in permafrost as a result of operation of a multiple well pad of northern oil and gas field are presented. In the model the most significant climatic and physical factors are taken into account such as solar radiation, determined by specific geographical location, heterogeneous structure of frozen soil, thermal stabilization of soil, possible insulation of the objects, seasonal fluctuations in air temperature, and freezing and thawing of the upper soil layer. Results of computing are presented.

  6. Intelligent systems in oil field development under uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, Marco A.C.; Vellasco, Marley M.B.R. (eds.) [PUC-Rio, Rio de Janeiro (Brazil). Dept. of Electrical Engineering

    2009-07-01

    Intelligent Systems use a range of methodologies for analysis, pre-processing, storage, organization, enhancing and mining of operational data, turning it into useful information and knowledge for decision makers in business enterprises. These intelligent technologies for decision support have been used with success by companies and organizations that are looking for competitive advantages whenever the issues on forecast, optimization, risks analysis, fraud detection, and decision under uncertainties are presented. Intelligent Systems (IS) offer to managers and decision makers the best solutions for complex applications, normally considered difficult, very restrictive or even impossible. The use of such techniques leads to a revolutionary process which has a significant impact in the business management strategy, by providing on time, correct information, ready to use. Computational intelligence techniques, especially genetic algorithms, genetic programming, neural networks, fuzzy logic and neuro-fuzzy as well as modern finance theories, such as real options theory, are here presented and exemplified in oil and gas exploitation and production. This book is addressed to executives and students, directly involved or interested in intelligent management in different fields. (orig.)

  7. Biodesulphurization Within Natural Gas in Oil and Gas Field

    Directory of Open Access Journals (Sweden)

    Sri Rahayu

    2010-10-01

    Full Text Available The presence of sulphur compounds in natural gas can interfere to the quality of natural gas. The decline of combustion gas capacity, metal instrument corrosion in gas piping, and the environmental pollution from gas emission can affect by their presence. Bio-filter is one of the methods  that selected to reduce sulphur content in natural gas. A lab scale study of hydrogen sulphide reduction in natural gas had conducted in oil and gas field using bio-filter method. The bio-filter system (±1 L volume contains an active carbon and thiosulphide medium as a substrate, Thiobacillus thioparus as a single culture of sulphur bacteria, and Thiobacillus thioparus with sludge as a mixed culture of sulphur bacteria. The study of hydrogen sulphide reduction was conducted with continuous flow line process. The gas flow rate approximately 1.5 L/min with a fluctuate presence of Hydrogen sulphide (approximately 40 - 70 mg/L. The bio-filter system contains active carbon, thiosulphide medium, and single culture of T. thioparus appear as a good filter for hydrogen sulphide reduction. During 24 hours, the hydrogen sulphide reduction obtains 93% to 16%. When  culture media added, the hydrogen sulphide reduction will increase almost 60% and then the reduction decrease to 4% after 20 hours. It is concluded that the bio-filter have potential to develop for sulphur reduction in natural gas.

  8. INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Scott Hara

    2001-06-27

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies will result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs.

  9. Increasing Heavy Oil Reserves in the Wilmington Oil Field through Advanced Reservoir Characterization and Thermal Production Technologies

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; David K.Davies and Associates; Tidelands Oil Production Company; University of Southern California

    1999-06-25

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California. This is realized through the testing and application of advanced reservoir characterization and thermal production technologies. It is hoped that the successful application of these technologies will result in their implementation throughout the Wilmington Field and through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively insufficient because of several producability problems which are common in SBC reservoir; inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves.

  10. Wettability testing of unconsolidated oil sands using low field NMR technology

    Energy Technology Data Exchange (ETDEWEB)

    Ji, X.; Kantzas, A.; Bryan, J. [University of Calgary/TIPM Laboratory (Canada)

    2011-07-01

    In an oil field it is important to understand wettability within the reservoir as it has an important impact on several parameters. However it is difficult to measure wettability in oil sands since conventional Amott/USBM testing cannot be applied. The aim of this paper is to develop protocols to assess wettability from NMR spectra in heavy oil reservoirs. Research was conducted on water wet and oil wet conditions; 3 sets of experiments were carried out with oil phases of different viscosity. Results showed that the signal from oil is insensitive to the location of the oil when viscosity increases but that water relaxation times are linked to the presence of water so water peak shifts can be used to determine different wettability states. This study determined that using water phase NMR relaxation presents several advantages to extract wettability information in unconsolidated sand systems and a technique was developed to interpret wettability.

  11. PetroChina Licensed for Nation's Offshore Oil Fields Development

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ With the approval by the State Council - the Chinese Government, the Ministry of State and Resources formally authorized PetroChina, China's largest oil and gas producer, with the rights for oil and gas exploration and development in South China Sea on July 6.

  12. Basic results of oil field experiments which justify the development of oil and gas formations using CO2 in Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Nemeth, E.

    1984-01-01

    An oil field experiment begun in 1969 and conducted in the 1970s in the K-2 collector of the Budafa deposit is the basis for developing the deposits of oil and gas of Budafa and Lovasi by secondary and tertiary methods using CO2. The condition of the formation at the onset of pumping in the carbon dioxide is briefly described. The results of the experiment are confirmed by the substantial increase and improvement in the daily flow rates of wells and the oil extraction factor. The mechanism of displacement is analyzed, along with the factors which effect the results, and their value. The question about the role of clay minerals in the CO2, oil, water and rock system is examined along with methods for regulating the rate of pumping gas and the withdrawal rate.

  13. GWDC Solves World-class Drilling Bottleneck in Kenkijak Oil Field

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ The news that Greatwall Drilling Company Limited (GWDC) has drilled a well with the daily oil production of more than one thousand tons spread quickly when the Well H8010 of CNPC Aktobin Oil and Gas Shareholding Company (CNPC Aktobin) in Kenkijak Oil Field in Kazakhstan produced 1,170 tons on July 1, 2004; both the employees of GWDC and CNPC Aktobin could not hold their excited feeling and cheered at such encouraging news.

  14. INCREASED OIL RECOVERY FROM MATURE OIL FIELDS USING GELLED POLYMER TREATMENTS

    Energy Technology Data Exchange (ETDEWEB)

    G.P. Willhite; D.W. Green; C.S. McCool

    2003-05-01

    Gelled polymer treatments are applied to oil reservoirs to increase oil production and to reduce water production by altering the fluid movement within the reservoir. This report describes the results of a three-year research program aimed at reducing barriers to the widespread use of gelled polymer treatments by (1) developing methods to predict gel behavior during placement in matrix rock and fractures, (2) determining the persistence of permeability reduction after gel placement, and (3) developing methods to design production well treatments to control water production. The work focused on the gel system composed of polyacrylamide and chromium acetate. The molar mass of the polymer was about six million. Chromium(III) acetate reacted and formed crosslinks between polymer molecules. The crosslinked polymer molecules, or pre-gel aggregates, combine and grow to eventually form a 3-dimensional gel. A fundamental study to characterize the formation and growth of pre-gel aggregates was conducted. Two methods, flow field-flow fractionation (FFFF) and multi-angle laser light scattering (MALLS) were used. Studies using FFFF were inconclusive. Data taken using MALLS showed that at the gel time the average molar mass of gel aggregates increased by a factor of about three while the average size increase was approximately 50%. Increased acetate concentration in the gelant increases the gel time. The in situ performance of an added-acetate system was investigated to determine the applicability for in-depth treatments. Increased acetate concentrations delayed the development of increased flow resistance during gelant injection in short sandpacks. The development of increased flow resistance (in situ gelation) was extended from 2 to 34 days by increasing the acetate-to-chromium ratio from 38 to 153. In situ gelation occurred at a time that was approximately 22% of the bulk gelation time. When carbonate rocks are treated with gel, chromium retention in the rock may limit in

  15. Foamy oil flow : a laboratory curiosity or a real drive mechanism in field operations?

    Energy Technology Data Exchange (ETDEWEB)

    Maini, B.B. [Calgary Univ., AB (Canada)

    2006-07-01

    The exceptional performance of primary depletion in many Canadian and Venezuelan heavy oil reservoirs can be attributed to the mechanism of foamy oil flow. It is has been speculated that the solution gas released during depletion remains dispersed in the oil and flows towards the production well in the form of gas-in-oil dispersion. However, most laboratory studies of foamy-oil-flow reveal that the depletion rates required for generating dispersed flow are completely unrealistic in field operations. This study examined whether foamy oil flow is merely a laboratory aberration. The paper defines foamy oil flow and explains how it evolved. A brief review of Canadian field practices was presented along with observations from cold production of heavy oil. The pore-scale mechanisms involved and the interplay between capillary and viscous forces were also discussed along with the conditions under which dispersed flow is generated in field operations. The strengths and weaknesses of several mathematical models proposed for numerical simulation of foamy oil flow were described.

  16. Chemical composition of asphaltenes of crude oil from Baradero field in Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, V.V.; Proskuryakov, V.A.; Klyavina, O.A.; Kolyabina, N.A. [L.N. Tolstoi Tula State Pedagogical Institute (Russian Federation)

    1994-09-10

    Asphaltenes of crude oil from Baradero field in Cuba have been studied by physical and physicochemical methods. Dynamics of distribution of nitrogen, sulfur, and oxygen and also various functional groups in asphaltenes has been described. These data can be used for the proper deasphalting of crude oil and further treatment of asphaltenes.

  17. Market potential of solar thermal enhanced oil recovery-a techno-economic model for Issaran oil field in Egypt

    Science.gov (United States)

    Gupta, Sunay; Guédez, Rafael; Laumert, Björn

    2017-06-01

    Solar thermal enhanced oil recovery (S-EOR) is an advanced technique of using concentrated solar power (CSP) technology to generate steam and recover oil from maturing oil reservoirs. The generated steam is injected at high pressure and temperature into the reservoir wells to facilitate oil production. There are three common methods of steam injection in enhanced oil recovery - continuous steam injection, cyclic steam stimulation (CSS) and steam assisted gravity drainage (SAGD). Conventionally, this steam is generated through natural gas (NG) fired boilers with associated greenhouse gas emissions. However, pilot projects in the USA (Coalinga, California) and Oman (Miraah, Amal) demonstrated the use of S-EOR to meet their steam requirements despite the intermittent nature of solar irradiation. Hence, conventional steam based EOR projects under the Sunbelt region can benefit from S-EOR with reduced operational expenditure (OPEX) and increased profitability in the long term, even with the initial investment required for solar equipment. S-EOR can be realized as an opportunity for countries not owning any natural gas resources to make them less energy dependent and less sensible to gas price fluctuations, and for countries owning natural gas resources to reduce their gas consumption and export it for a higher margin. In this study, firstly, the market potential of S-EOR was investigated worldwide by covering some of the major ongoing steam based EOR projects as well as future projects in pipeline. A multi-criteria analysis was performed to compare local conditions and requirements of all the oil fields based on a defined set of parameters. Secondly, a modelling approach for S-EOR was designed to identify cost reduction opportunities and optimum solar integration techniques, and the Issaran oil field in Egypt was selected for a case study to substantiate the approach. This modelling approach can be consulted to develop S-EOR projects for any steam flooding based oil

  18. Enhancement of the TORIS data base of Appalachian basin oil fields. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-31

    The Tertiary Oil Recovery Information System, or TORIS, was developed by the Department of Energy in the early 1980s with a goal of accounting for 70% of the nation`s original oil in place (OOIP). More than 3,700 oil reservoirs were included in TORIS, but coverage in the Appalachian basin was poor. This TORIS enhancement project has two main objectives: to increase the coverage of oil fields in the Appalachian basin; and to evaluate data for reservoirs currently in TORIS, and to add, change or delete data as necessary. Both of these objectives have been accomplished. The geological surveys in Kentucky, Ohio, Pennsylvania and West Virginia have identified 113 fields in the Appalachian basin to be included in TORIS that collectively contained 80% of the original oil in place in the basin. Furthermore, data in TORIS at the outset of the project was checked and additional data were added to the original 20 TORIS oil fields. This final report is organized into four main sections: reservoir selection; evaluation of data already in TORIS; industry assistance; and data base creation and validation. Throughout the report the terms pool and reservoir may be used in reference to a single zone of oil accumulation and production within a field. Thus, a field is composed of one or more pools at various stratigraphic levels. These pools or reservoirs also are referred to as pay sands that may be individually named sandstones within a formation or group.

  19. Redistribution of mobile surface charges of an oil droplet in water in applied electric field.

    Science.gov (United States)

    Li, Mengqi; Li, Dongqing

    2016-10-01

    Most researches on oil droplets immersed in aqueous solutions assume that the surface charges of oil droplets are, similar to that of solid particles, immobile and distributed uniformly under external electric field. However, the surface charges at the liquid-liquid interface are mobile and will redistribute under external electric field. This paper studies the redistribution of surface charges on an oil droplet under the influence of the external electrical field. Analytical expressions of the local zeta potential on the surface of an oil droplet after the charge redistribution in a uniform electrical field were derived. The effects of the initial zeta potential, droplet radius and strength of applied electric field on the surface charge redistribution were studied. In analogy to the mobile surface charges, the redistribution of Al2O3-passivated aluminum nanoparticles on the oil droplet surface was observed under applied electrical field. Experimental results showed that these nanoparticles moved and accumulated towards one side of the oil droplet under electric field. The redistribution of the nanoparticles is in qualitative agreement with the redistribution model of the mobile surface charges developed in this work.

  20. Geochemistry of Eagle Ford group source rocks and oils from the first shot field area, Texas

    Science.gov (United States)

    Edman, Janell D.; Pitman, Janet K.; Hammes, Ursula

    2010-01-01

    Total organic carbon, Rock-Eval pyrolysis, and vitrinite reflectance analyses performed on Eagle Ford Group core and cuttings samples from the First Shot field area, Texas demonstrate these samples have sufficient quantity, quality, and maturity of organic matter to have generated oil. Furthermore, gas chromatography and biomarker analyses performed on Eagle Ford Group oils and source rock extracts as well as weight percent sulfur analyses on the oils indicate the source rock facies for most of the oils are fairly similar. Specifically, these source rock facies vary in lithology from shales to marls, contain elevated levels of sulfur, and were deposited in a marine environment under anoxic conditions. It is these First Shot Eagle Ford source facies that have generated the oils in the First Shot Field. However, in contrast to the generally similar source rock facies and organic matter, maturity varies from early oil window to late oil window in the study area, and these maturity variations have a pronounced effect on both the source rock and oil characteristics. Finally, most of the oils appear to have been generated locally and have not experienced long distance migration. 

  1. Map Service Showing Geology, Oil and Gas Fields and Geological Provinces of the Former Soviet Union

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map service includes geology, center points of oil and gas fields, geologic provinces, and political boundaries in the Former Soviet Union. This compilation is...

  2. Map Service Showing Geology, Oil and Gas Fields, and Geologic Provinces of the Arctic

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The digitally compiled map includes geology, oil and gas field centerpoints, and geologic provinces of the Arctic (North Pole area encircled by 640 N Latitude). The...

  3. Map Service Showing Geology, Oil and Gas Fields, and Geologic Provinces of Africa

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map service includes geology, oil and gas field centerpoints, and geologic provinces of Africa with some of these components extended into geographically...

  4. Radio-geochemical methods at surface expiotation of oil and gas fields

    OpenAIRE

    Sobolev, I. S.

    2007-01-01

    A review of the situation with radio-geochemical methods of searching oil and gas fields is presented. Potential reasons of radio-geochemical anomalies formation are considered, some approaches to interpretation of radio-geochemical datum are listed

  5. An Analysis of the Distribution and Economics of Oil Fields for Enhanced Oil Recovery-Carbon Capture and Storage

    Science.gov (United States)

    Hall, Kristyn Ann

    The rising carbon dioxide emissions contributing to climate change has lead to the examination of potential ways to mitigate the environmental impact. One such method is through the geological sequestration of carbon (CCS). Although there are several different forms of geological sequestration (i.e. Saline Aquifers, Oil and Gas Reservoirs, Unminable Coal Seams) the current projects are just initiating the large scale-testing phase. The lead entry point into CCS projects is to combine the sequestration with enhanced oil recovery (EOR) due to the improved economic model as a result of the oil recovery and the pre-existing knowledge of the geological structures. The potential scope of CCS-EOR projects throughout the continental United States in terms of a systematic examination of individual reservoir storage potential has not been examined. Instead the majority of the research completed has centered on either estimating the total United States storage potential or the potential of a single specific reservoir. The purpose of this paper is to examine the relationship between oil recovery, carbon dioxide storage and cost during CCS-EOR. The characteristics of the oil and gas reservoirs examined in this study from the Nehring Oil and Gas Database were used in the CCS-EOR model developed by Sean McCoy to estimate the lifting and storage costs of the different reservoirs throughout the continental United States. This allows for an examination of both technical and financial viability of CCS-EOR as an intermediate step for future CCS projects in other geological formations. One option for mitigating climate change is to store industrial CO2 emissions in geologic reservoirs as part of a process known as carbon capture and storage (CCS). There is general consensus that large-scale deployment of CCS would best be initiated by combining geologic sequestration with enhanced oil recovery (EOR), which can use CO2 to improve production from declining oil fields. Revenues from the

  6. Effect of electric field treatment on unsaturated fatty acid in crude avocado oil.

    Science.gov (United States)

    Ariza-Ortega, José Alberto; Ramírez-Moreno, Esther; Díaz-Reyes, Joel; Cruz-Cansino, Nelly del Socorro

    2014-09-01

    The objective of this study was to evaluate the stability of the fatty acids in avocado oil when the product is subjected to different conditions of electric field treatment (voltage: 5 kV cm(-1); frequency: 720 Hz; treatment time: 5, 10, 15, 20, and 25 min). Fatty acids were analyzed by Fourier transform infrared spectroscopy in the mid-infrared region. Electric field is a suitable method to preserve the oil quality and composition with minimal modifications in unsaturated fatty acids.

  7. The analysis of repeated failures of pipelines in Kal'chinskoe oil field

    Science.gov (United States)

    Shavlov, E. N.; Brusnik, O. V.; Lukjanov, V. G.

    2016-09-01

    The paper presents the chemical analysis of oilfield water and hydraulic analysis of the liquid flow in Kal'chinskoe oil field pipeline that allow detecting the causes of the internal corrosion processes. The inhibitor protection is suggested to reduce the corrosion rate in the pipelines of Kal'chinskoe oil field. Based on the analysis of the pipeline failures, it is suggested to replace steel pipes by fiberglass pipes.

  8. Technical and economic feasibility study of flue gas injection in an Iranian oil field

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Ahmadi

    2015-09-01

    The main aim of this research is to investigate various gas injection methods (N2, CO2, produced reservoir gas, and flue gas in one of the northern Persian gulf oil fields by a numerical simulation method. Moreover, for each scenario of gas injection technical and economical considerations are took into account. Finally, an economic analysis is implemented to compare the net present value (NPV of the different gas injection scenarios in the aforementioned oil field.

  9. THE EFFECT OF OIL CAVITY DEPTH ON TEMPERATURE FIELD IN HEAVY HYDROSTATIC THRUST BEARING

    Institute of Scientific and Technical Information of China (English)

    SHAO Jun-peng; DAI Chun-xi; ZHANG Yan-qin; YU Xiao-dong; XU Xiao-qiu; WANG Yun-fei

    2011-01-01

    For a heavy hydrostatic bearing with a high linear velocity,the results of numerical calculations often differ from practical conditions if the viscosity is considered as constant.In this article,the influence of the oil cavity depth on the temperature field in the heavy hydrostatic bearing is discussed in the context of variable viscosity.The viscosity-temperature relations for the gap oil film are first established by fitting B-Spline curves,then,numerical calculations for the temperature field in the heavy hydrostatic bearing of different oil cavity depths are carried out based on Finite Volume Method (FVM) under the same rotating speed,and the influence of the oil cavity depth on the temperature distribution in the gap oil film of the hydrostatic bearing is discussed.The results of numerical calculations provide the temperature distribution state inside the hydrostatic bearing,which would help the selection and the design of hydrostatic bearings in engineering practice.

  10. Drilling horizontal wells from the coast to reach offshore heavy oil pool, Puerto Escondido field, Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Puentes, G.E.; Alvarez, R.R. [Cubapetroleo, Havana, (Cuba); Marrero, F.M. [Ministry of Basic Industry, Havana, (Cuba)

    1999-11-01

    A series of vertical oil wells were drilled in the Puerto Escondido field in Cuba as part of an oil exploration program in the 1970s. The drilling of well PE-3 in 1992 revealed that the field contained one of the most significant oil finds in the western region of Cuba. Due to the fractured nature of the reservoir, it was determined that future wells should be drilled using horizontal drilling technology to increase hydrocarbon recoveries, and to maintain high production rates. The first horizontal well was successfully drilled in April, 1997. Four other wells were drilled by September 1998. This paper briefly described the drilling techniques used.

  11. De-convoluting mixed crude oil in Prudhoe Bay Field, North Slope, Alaska

    Science.gov (United States)

    Peters, K.E.; Scott, Ramos L.; Zumberge, J.E.; Valin, Z.C.; Bird, K.J.

    2008-01-01

    Seventy-four crude oil samples from the Barrow arch on the North Slope of Alaska were studied to assess the relative volumetric contributions from different source rocks to the giant Prudhoe Bay Field. We applied alternating least squares to concentration data (ALS-C) for 46 biomarkers in the range C19-C35 to de-convolute mixtures of oil generated from carbonate rich Triassic Shublik Formation and clay rich Jurassic Kingak Shale and Cretaceous Hue Shale-gamma ray zone (Hue-GRZ) source rocks. ALS-C results for 23 oil samples from the prolific Ivishak Formation reservoir of the Prudhoe Bay Field indicate approximately equal contributions from Shublik Formation and Hue-GRZ source rocks (37% each), less from the Kingak Shale (26%), and little or no contribution from other source rocks. These results differ from published interpretations that most oil in the Prudhoe Bay Field originated from the Shublik Formation source rock. With few exceptions, the relative contribution of oil from the Shublik Formation decreases, while that from the Hue-GRZ increases in reservoirs along the Barrow arch from Point Barrow in the northwest to Point Thomson in the southeast (???250 miles or 400 km). The Shublik contribution also decreases to a lesser degree between fault blocks within the Ivishak pool from west to east across the Prudhoe Bay Field. ALS-C provides a robust means to calculate the relative amounts of two or more oil types in a mixture. Furthermore, ALS-C does not require that pure end member oils be identified prior to analysis or that laboratory mixtures of these oils be prepared to evaluate mixing. ALS-C of biomarkers reliably de-convolutes mixtures because the concentrations of compounds in mixtures vary as linear functions of the amount of each oil type. ALS of biomarker ratios (ALS-R) cannot be used to de-convolute mixtures because compound ratios vary as nonlinear functions of the amount of each oil type.

  12. The discovery and development of the El Dorado (Kansas) oil field

    Science.gov (United States)

    Skelton, L.H.

    1997-01-01

    Pioneers named El Dorado, Kansas, in 1857 for the beauty of the site and the promise of future riches but not until 58 years later was black rather than mythical yellow gold discovered when the Stapleton No. 1 oil well came in on October 5, 1915. El Dorado's leaders were envious when nearby towns found huge gas fields and thrived. John Donley, an El Dorado barber, had tried to find either gas or oil in 1878 at a nearby site selected by a spiritualist. He staked out a townsite, spudded a well and drilled 200 feet before running out of money. Wells in 1879 and 1882 produced only brine. In June, 1914, chafed over discovery of oil in nearby Augusta, El Dorado city fathers contracted with Erasmus Haworth, soon to retire from his position as State Geologist, to perform a geological study of the area. His field work outlined the El Dorado Anticline, which unsuccessfully was drilled first in August, 1915. On abandonment, the Wichita Natural Gas Company purchased the lease and drilled the Stapleton No. 1 oil well. More success followed and by 1918, the El Dorado produced 29 million barrels, almost 9% of the nation's oil. Entrepreneurs came and prospered: the Cities Service Oil Company, A.L. Derby, Jack Vickers, and Bill Skelly all became familiar names in Midcontinent oil marketing. Earlier giant fields had hurt the price of crude oil but the El Dorado came in as both World War I and the rapid popularization of motor transport made a market for both light and heavy ends of the refinery stream. The giant gas field never materialized as hoped but in late 1995, the El Dorado Field produced its 300 millionth barrel of oil.

  13. Sulfate-reducing bacteria release barium and radium from naturally occurring radioactive material in oil-field barite

    Science.gov (United States)

    Phillips, E.J.P.; Landa, E.R.; Kraemer, T.; Zielinski, R.

    2001-01-01

    Scale and sludge deposits formed during oil production can contain elevated levels of Ra, often coprecipitated with barium sulfate (barite). The potential for sulfate-reducing bacteria to release 226 Ra and Ba (a Ra analog) from oil-field barite was evaluated. The concentration of dissolved Ba increased when samples containing pipe scale, tank sludge, or oil-field brine pond sediment were incubated with sulfate-reducing bacteria Desulfovibrio sp., Str LZKI, isolated from an oil-field brine pond. However, Ba release was not stoichiometric with sulfide production in oil-field samples, and material.

  14. Index to names of oil and gas fields in Oklahoma, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Lacina, J.L.

    1979-05-01

    This index contains the current and discontinued names of the oil and gas fields in Oklahoma. They are listed according to assignments made by the Oklahoma Nomenclature Committee of the Kansas-Oklahoma Division, Mid-Continent Oil and Gas Association. Also listed are some names which have been used locally or unofficially for certain areas. Included also are: (1) the date when the field was named; (2) the description of location by county, township, and section; and (3) a statement as to the disposition of a field when it was combined with other fields.

  15. Petroleum, oil field waters, and authigenic mineral assemblages - Are they in metastable equilibrium in hydrocarbon reservoirs?

    Science.gov (United States)

    Helgeson, Harold C.; Knox, Annette M.; Owens, Christine E.; Shock, Everett L.

    1993-07-01

    The hypothesis that although the presence of carboxylic acids and carboxylate anions in oil field waters is commonly attributed to the thermal maturation of kerogen or bacterial degradation of hydrocarbons during water-washing of petroleum in relatively shallow reservoirs, they may have also been produced in deeper reservoirs by the hydrolysis of hydrocarbons in petroleum at the oil-water interface is tested. Calculations were carried out to determine the distribution of species with the minimum Gibbs free energy in overpressured oil field waters in the Texas Gulf Coast assuming metastable equilibrium among calcite, albite, and a representative spectrum of organic and inorganic aqueous species at reservoir temperatures and pressures. The hypothesis that homogeneous equilibrium obtains among carboxylate and carbonate species in oil field waters is confirmed.

  16. Anaerobic thermophilic bacteria isolated from a Venezuelan oil field and its potential use in microbial improved oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Trebbau, G.; Fernandez, B.; Marin, A. [INTEVEP S.A., Caracas (Venezuela)

    1995-12-31

    The objective of this work is to determine the ability of indigenous bacteria from a Venezuelan oil field to grow under reservoir conditions inside a porous media, and to produce metabolites capable of recovering residual crude oil. For this purpose, samples of formation waters from a central-eastern Venezuelan oil reservoir were enriched with different carbon sources and a mineral basal media. Formation water was used as a source of trace metals. The enrichments obtained were incubated at reservoir temperature (71{degrees}C), reservoir pressure (1,200 psi), and under anaerobic conditions for both outside and inside porous media (Berea core). Growth and metabolic activity was followed outside porous media by measuring absorbance at 660 nm, increases in pressure, and decreases in pH. Inside porous media bacterial activity was determined by visual examination of the produced waters (gas bubbles and bacterial cells). All the carbohydrates tested outside porous media showed good growth at reservoir conditions. The pH was lowered, gases such as CO{sub 2} and CH{sub 4} were identified by GC. Surface tension was lowered in some enrichments by 30% when compared to controls. Growth was decreased inside porous media, but gases were produced and helped displace oil. In addition, 10% residual oil was recovered from the Berea core. Mathematical modeling was applied to the laboratory coreflood experiment to evaluate the reproducibility of the results obtained.

  17. Repellency of aerosol and cream products containing fennel oil to mosquitoes under laboratory and field conditions.

    Science.gov (United States)

    Kim, Soon-Il; Chang, Kyu-Sik; Yang, Young-Cheol; Kim, Byung-Seok; Ahn, Young-Joon

    2004-11-01

    The repellency of fennel (Foeniculum vulgare Miller)-containing products (5% aerosol and 8% cream) against mosquitoes was compared with those of citronella oil, geranium oil and deet, as well as three commercial repellents, Baby Keeper cream containing IR3535, MeiMei cream containing citronella and geranium oils, and Repellan S aerosol containing 19% N,N-diethyl-m-toluamide (deet) under laboratory and field conditions. In a laboratory study with female Aedes aegypti (L), fennel oil exhibited good repellency in a release-in-cage test and repellency in skin and patch tests of the oil was comparable with those of citronella and geranium oils. In paddy field tests with five human volunteers, 5% and 8% fennel oil-containing aerosol and cream produced 84% and 70% repellency, respectively, at 90 min after exposure, whereas Baby Keeper cream and MeiMei cream gave 71% and 57% repellency at 90 min after exposure, respectively, and Repellan S aerosol gave 89% repellency at 210 min. The species and ratio of mosquitoes collected were the genera Culex (44.1%), Anopheles (42.2%), Aedes (7.8%) and Armigeres (5.9%). Fennel oil-containing products could be useful for protection from humans and domestic animals from vector-borne diseases and nuisance caused by mosquitoes.

  18. Preliminary technical and legal evaluation of disposing of nonhazardous oil field waste into salt caverns

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J.; Elcock, D.; Raivel, M.; Caudle, D.; Ayers, R.C. Jr.; Grunewald, B.

    1996-06-01

    Caverns can be readily formed in salt formations through solution mining. The caverns may be formed incidentally, as a result of salt recovery, or intentionally to create an underground chamber that can be used for storing hydrocarbon products or compressed air or disposing of wastes. The purpose of this report is to evaluate the feasibility, suitability, and legality of disposing of nonhazardous oil and gas exploration, development, and production wastes (hereafter referred to as oil field wastes, unless otherwise noted) in salt caverns. Chapter 2 provides background information on: types and locations of US subsurface salt deposits; basic solution mining techniques used to create caverns; and ways in which salt caverns are used. Later chapters provide discussion of: federal and state regulatory requirements concerning disposal of oil field waste, including which wastes are considered eligible for cavern disposal; waste streams that are considered to be oil field waste; and an evaluation of technical issues concerning the suitability of using salt caverns for disposing of oil field waste. Separate chapters present: types of oil field wastes suitable for cavern disposal; cavern design and location; disposal operations; and closure and remediation. This report does not suggest specific numerical limits for such factors or variables as distance to neighboring activities, depths for casings, pressure testing, or size and shape of cavern. The intent is to raise issues and general approaches that will contribute to the growing body of information on this subject.

  19. Update on cavern disposal of NORM-contaminated oil field wastes.

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J. A.

    1998-09-22

    Some types of oil and gas production and processing wastes contain naturally occurring radioactive material (NORM). If NORM is present at concentrations above regulatory levels in oil field waste, the waste requires special disposal practices. The existing disposal options for wastes containing NORM are limited and costly. Argonne National Laboratory has previously evaluated the feasibility, legality, risk and economics of disposing of nonhazardous oil field wastes, other than NORM waste, in salt caverns. Cavern disposal of nonhazardous oil field waste, other than NORM waste, is occurring at four Texas facilities, in several Canadian facilities, and reportedly in Europe. This paper evaluates the legality, technical feasibility, economics, and human health risk of disposing of NORM-contaminated oil field wastes in salt caverns as well. Cavern disposal of NORM waste is technically feasible and poses a very low human health risk. From a legal perspective, a review of federal regulations and regulations from several states indicated that there are no outright prohibitions against NORM disposal in salt caverns or other Class II wells, except for Louisiana which prohibits disposal of radioactive wastes or other radioactive materials in salt domes. Currently, however, only Texas and New Mexico are working on disposal cavern regulations, and no states have issued permits to allow cavern disposal of NORM waste. On the basis of the costs currently charged for cavern disposal of nonhazardous oil field waste (NOW), NORM waste disposal in caverns is likely to be cost competitive with existing NORM waste disposal methods when regulatory agencies approve the practice.

  20. Polymer composite coatings to protect parts of oil field equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kislyy, P.S.; Alekseyenko, A.A.; Dzyadykevich, Yu.V.; Kalba, Ye.N.

    1983-01-01

    A study was made of the possibility of using polymer composite coating for protection from corrosion and wear of working wheels of oil pumping pumps. A study was made of the physicomechanical properties of the polymer matrix. Technology was developed for applying the coating based on a polymer matrix and refractory filler which was introduced at the UMN ''Druzhba.''

  1. A genome probe survey of the microbial community in oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Voordouw, G.; Telang, A. [Calgary Univ., AB (Canada). Dept. of Biology

    2000-07-01

    Reverse sample genome probing (RSGP) was conducted in water injected oil fields in Western Canada in order to analyze the microbial community in the fields to identify different bacteria responsible for microbially influenced corrosion (MIC) or souring. Oil fields of moderate temperature and salinity have an anaerobic microbial community consisting of sulfate-reducing bacteria (SRB), sulfide-oxidizing bacteria (SOB) and heterotrophic bacteria. The RSGP revealed that selected SRB are enhanced at metal surfaces and can therefore contribute to corrosion. Some of the SRB were found to be insensitive to biocides that are used in the field. RSGP also showed that injection of nitrate, instead of sulfate, leads to a marked increase of Campylobacter sp., which gets its energy from the oxidation of sulfide by nitrate. It was concluded that RSGP is a useful tool to monitor the effects of chemical stresses on the oil field microbial community. 13 refs., 2 figs.

  2. Microbial methane production associated with carbon steel corrosion in a Nigerian oil field

    Directory of Open Access Journals (Sweden)

    Jaspreet eMand

    2016-01-01

    Full Text Available Microbially influenced corrosion (MIC in oil field pipeline systems can be attributed to many different types of hydrogenotrophic microorganisms including sulfate reducers, methanogens and acetogens. Samples from a low temperature oil reservoir in Nigeria were analyzed using DNA pyrotag sequencing. The microbial community compositions of these samples revealed an abundance of anaerobic methanogenic archaea. Activity of methanogens was demonstrated by incubating samples anaerobically in a basal salts medium, in the presence of carbon steel and carbon dioxide. Methane formation was measured in all enrichments and correlated with metal weight loss. Methanogens were prominently represented in pipeline solids samples, scraped from the inside of a pipeline, comprising over 85% of all pyrosequencing reads. Methane production was only witnessed when carbon steel beads were added to these pipeline solids samples, indicating that no methane was formed as a result of degradation of the oil organics present in these samples. These results were compared to those obtained for samples taken from a low temperature oil field in Canada, which had been incubated with oil, either in the presence or in the absence of carbon steel. Again, methanogens present in these samples catalyzed methane production only when carbon steel was present. Moreover, acetate production was also found in these enrichments only in the presence of carbon steel. From these studies it appears that carbon steel, not oil organics, was the predominant electron donor for acetate production and methane formation in these low temperature oil fields, indicating that the methanogens and acetogens found may contribute significantly to MIC.

  3. Microbial Methane Production Associated with Carbon Steel Corrosion in a Nigerian Oil Field.

    Science.gov (United States)

    Mand, Jaspreet; Park, Hyung S; Okoro, Chuma; Lomans, Bart P; Smith, Seun; Chiejina, Leo; Voordouw, Gerrit

    2015-01-01

    Microbially influenced corrosion (MIC) in oil field pipeline systems can be attributed to many different types of hydrogenotrophic microorganisms including sulfate reducers, methanogens and acetogens. Samples from a low temperature oil reservoir in Nigeria were analyzed using DNA pyrotag sequencing. The microbial community compositions of these samples revealed an abundance of anaerobic methanogenic archaea. Activity of methanogens was demonstrated by incubating samples anaerobically in a basal salts medium, in the presence of carbon steel and carbon dioxide. Methane formation was measured in all enrichments and correlated with metal weight loss. Methanogens were prominently represented in pipeline solids samples, scraped from the inside of a pipeline, comprising over 85% of all pyrosequencing reads. Methane production was only witnessed when carbon steel beads were added to these pipeline solids samples, indicating that no methane was formed as a result of degradation of the oil organics present in these samples. These results were compared to those obtained for samples taken from a low temperature oil field in Canada, which had been incubated with oil, either in the presence or in the absence of carbon steel. Again, methanogens present in these samples catalyzed methane production only when carbon steel was present. Moreover, acetate production was also found in these enrichments only in the presence of carbon steel. From these studies it appears that carbon steel, not oil organics, was the predominant electron donor for acetate production and methane formation in these low temperature oil fields, indicating that the methanogens and acetogens found may contribute significantly to MIC.

  4. INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2001-08-08

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California, through the testing and application of advanced reservoir characterization and thermal production technologies. The hope is that successful application of these technologies will result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs, including: (1) Development of three-dimensional (3-D) deterministic and stochastic reservoir simulation models--thermal or otherwise--to aid in reservoir management of the steamflood and post-steamflood phases and subsequent development work. (2) Development of computerized 3-D visualizations of the geologic and reservoir simulation models to aid reservoir surveillance and operations. (3) Perform detailed studies of the geochemical interactions between the steam and the formation rock and fluids. (4) Testing and proposed application of a

  5. Evolution of Hydrodynamic Field, Oil-Gas Migration and Accumulation in Songliao Basin, China

    Institute of Scientific and Technical Information of China (English)

    楼章华; 朱蓉; 金爱民; 孙毛明; 蔡希源; 迟元林

    2004-01-01

    The oil-gas migration and accumulation in the Songliao Basin were analyzed in the view of fluid dynamics by the authors. The key point of fluid dynamics is hydrodynamics. Oil-gas migration and accumulation are related closely with formation and evolution of hydrodynamic field. Based on abundant data, initial formation pressure and other parameters, such as water head were studied. They can be used to understand the present distribution of hydrodynamic field and its hydrochemical features. Generally, the hydrodynamic field in the basin is obviously asymmetrical. In its north and east part, there are the areas of centripetal flow caused by topographic relief when meteoric water permeate downwards. Its south part is an evaporation-concentration area. The central depression is an area of centrifugal flow driven by sediment compaction and its cross-formational flow area. Only at the basin margin and in the local uplifted and denudated area are the meteoric water permeating downwards areas. The centrifugal flow driven by sediment compaction is the main dynamic factor that induces oil-gas migration and accumulation and its formation period corresponding to the main stage of oil-gas migration and accumulation. Moreover, the evolution of hydrodynamic field has the cyclic property, which results in phased oil-gas migration by stages, and further dominates the terraced annular oil and gas distribution, concentric with their corresponding sags.

  6. Increased Oil Recovery from Mature Oil Fields Using Gelled Polymer Treatments

    Energy Technology Data Exchange (ETDEWEB)

    Willhite, G.P.; Green, D.W.; McCool, S.

    2001-03-28

    Gelled polymer treatments were applied to oil reservoirs to increase oil production and to reduce water production by altering the fluid movement within the reservoir. This report is aimed at reducing barriers to the widespread use of these treatments by developing methods to predict gel behavior during placement in matrix rock and fractures, determining the persistence of permeability reduction after gel placement, and by developing methods to design production well treatments to control water production. Procedures were developed to determine the weight-average molecular weight and average size of polyacrylamide samples in aqueous solutions. Sample preparation techniques were key to achieving reproducible results.

  7. Assessment of potential increased oil production by polymer-waterflood in northern and southern mid-continent oil fields. Progress report for the quarter ending December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    Six tasks are reported on: geological and engineering study of the DOE-Kewanee polymer-augmented waterflood, review of polymer injection program in this field, evaluation of results of polymer-augmented waterflood in this field, review of geological and engineering characteristics of oil fields now in waterflood as candidates for polymer augmentation, review of fields currently under primary production, and determination of ranges of future increased oil production from the polymer-water process in the project area.

  8. Laboratory and field observations of stress-wave induced changes in oil flow behavior

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, P. M. (Peter M.); Majer, Ernest Luther; Wooden, W. (William); Daley, T. M. (Thomas M.)

    2001-01-01

    We present recent results of laboratory and field experiments designed to validate and quantify the phenomenon of seismically enhanced oil production in marginal reservoirs. Controlled laboratory experiments were performed where mechanical stress oscillations at 100 Hz or less were applied to sandstone cores while flowing oil and/or brine at constant flow rates. Steady-state flow and simulated flooding experiments indicated that stress stimulation causes significant changes in the ability of one fluid to displace the other and on the preference that the rock has for trapping one fluid over the other. For Berea sandstone, which is highly water wet, stress stimulation caused oil production to be impeded during water floods and caused the bulk fluid pressure drop across the core to increase during steady-state simultaneous flow of oil and brine. A possible explanation of these observations is that stimulation caused the core to become more oil wet. Field stimulation tests on producing reservoirs at Lost Hills, California were performed using a downhole fluid pressure pulsation device. Stimulation was applied in one well for 50 days total during July - November 2000. Two groups of producing wells were monitored for changes in oil cut and oil production during the test. A control group of 26 wells displayed an oil-cut increase of 29% and an oil production increase of 26% which are clearly correlated with the stimulation treatment. A larger group of 60 wells showed 11% oil-cut and 17v0 production increases. Similar increases were observed during the October 1999 Hector Mine earthquake, magnitude 7.1, in the Mojave Desert about 230 miles from Lost Hills. Downhole seismic monitoring of the stimulation wavefield is being used to help quantify the frequency range and energy threshold required for effective production enhancement.

  9. Rock mechanics related to Jurassic underburden at Valdemar oil field

    DEFF Research Database (Denmark)

    Foged, Niels

    1999-01-01

    The presented study is a part of the Danish Energy Research project PRIORITY - Imroved Oil Recovery and Productivity from Lower Cretaceous Carbonates.It considers a multi-disciplinary study of the Jurassic shale underlying the Valdemar structure and gives a status of the on-going research work.......It has been initiated as a feasibility study of the North Jens-1 core 12 taken in the top Jurassic clay shale as a test specimens for integrated petrological, mineralogical and rock mechanical studies. Following topics are studied:(1) Pore pressure generation due to conversion of organic matter...... and deformation properties of the clay shale using the actual core material or outcrop equivalents.(3) Flushing mechanisms for oil and gas from source rocks due to possibly very high pore water pressure creating unstable conditions in deeply burried sedimentsThere seems to be a need for integrating the knowledge...

  10. Intelligent fiber sensing system for the oil field area

    Science.gov (United States)

    Sun, Wenju; Ma, Linping

    2010-08-01

    Optical Fiber strain sensor using fiber Bragg grating are poised to play a major role in structural health from military to civil engineering. Fiber Bragg Grating sensor is a practical type of fiber optic sensors. Its measurement is encoded with the wavelength of the optical signal reflected from fiber Bragg grating. The method of measuring the absolute optical wavelength is a critical component of the fiber optic sensing system. To reliably detect very small changes in the environment at the sensor, the interrogation system must provide accurate and repeatable wavelength measurements. Energy sources are increasingly scarce in the world. Getting oil from the oil-wells has become more and more difficult. Therefore, new technology to monitor the oil-well condition has become extremely important. The traditional electrical sensor system is no longer useful because of the down-hole's high temperature and high pressure environment. The optical fiber sensing system is the first choice to monitor this condition. This system will reduce the cost and increase the productivity. In the high pressure and high temperature environment, the traditional packed fiber grating pressure-temperature sensor will be no longer reliability. We have to find a new fiber grating temperature-pressure sensor element and the interrogation system. In this work we use the very narrow bandwidth birefringent fiber grating as the sensing element. We obtain the interrogation system has 0.1 pm resolution.

  11. Clear well physical water treatment technology for the oil field

    Energy Technology Data Exchange (ETDEWEB)

    Troncoso y Troncoso, Joao Ricardo [Weatherford Brazil, Rio de Janeiro, RJ (Brazil); Rzeznik, Lawrence; Parker, Wiley L. [Weatherford International, Houston, TX (United States)

    2008-07-01

    Deposits of various types are common problems associated with oil and gas production. Deposits of scale, paraffin can block tubing, cause pumps to stick and clog valves and chokes. The expense and widespread occurrence of deposition problems have resulted in the development of a variety of treatment options which have been marginally successful at best. This paper discusses a new and novel approach for controlling scale, paraffin using an electronic physical water treating device and results that have been achieved. This physical water treatment technology has been applied to oil and gas production wells which incorporate all forms of product lift. Units are now also being installed in several South American locations. This paper will discuss the results obtained from the use of these physical water treatment devices and discuss the criteria which are used to ascertain whether a particular well site's problems can be eased by use of these devices. These criteria will be discussed for both land based and offshore oil wells. (author)

  12. Mixed Finite Element Formulation for Magnetic Fluid Oil Flow in Electromagnetic Field

    Directory of Open Access Journals (Sweden)

    Tan Phey Hoon

    2017-01-01

    Full Text Available Pressure depletion and high viscosity of crude oil in oil reservoir are the main challenges in oil recovery process. A potential solution is to employ electromagnetic heating coupled with magnetic fluid injection. The present work delivers a fundamental study on the interaction between magnetic fluid flow with electromagnetic field. The two-dimensional, incompressible flow is solved numerically using mixed finite element method. The velocity fields, temperature and pressure are the variables of interest, to be obtained by solving mass, momentum and energy equations coupled with Maxwell’ equations. The fluid stress arises simultaneously with the external magnetic force which mobilises and increases the temperature of the oil flow. Verification is made against available data obtained from different numerical method reported in literature. The results justify feasibility of the mixed finite element formulation as an alternative for the modelling of the magnetic fluid flow.

  13. Oil palm and the emission of greenhouse gasses- from field measurements in Indonesia

    Science.gov (United States)

    Rahman, Niharika; Bruun, Thilde Bech; Giller, Ken E.; Magid, Jakob; van de Ven, Gerrie; de Neergaard, Andreas

    2017-04-01

    Palm oil from the oil palm (Elaeis guianensis) has in recent years become the world's most important vegetable oil. The increasing demand for palm oil has led to expansion of oil palm plantations, which has caused environmental controversies associated with carbon losses and the use of large amounts of mineral fertilizers. Efforts to increase sustainability of oil palm cultivation, include recycling of oil-mill residues and pruning's, but with this comes increased potential for methane emission from the plantations. Until now no field-based data on greenhouse gas emissions from oil palm plantations have been reported. Here for the first time we present data from a long term (360 days) field trial in Bah Lias Research Station, North Sumatra, Indonesia on greenhouse gas emissions from an oil palm plantation with various treatments of recycled oil palm waste products, fertilizers and simulated rainfall. The first experiment was conducted over a full year (dry + wet season) with mineral fertilizer treatments including urea and ammonium sulphate, and organic fertilizer treatments constituting: empty fruit bunches (EFB), enriched mulch (EFB + palm oil mill effluent (POME) ) and pruned oil palm fronds (OPF). Treatment doses represent the current management in Indonesian plantations and the higher doses that are expected in the imminent future. For the organic treatments several methods of application (applied in inter-rows, piles, patches or bands) were evaluated. The second experiment investigated effects of soil water saturation on GHG emissions through adding 25 mm simulated rainfall per day for 21 days. Each palm tree received 1 kg of N fertilizer as urea or ammonium sulphate and enriched mulch. The gas fluxes in the fields was measured by a large static-chamber (1.8 m x 1.2 m) method and CH4 and N2O concentrations were determined using gas chromatographs. We found that emissions were significantly affected by the type and dose of mineral fertilizers. Application of

  14. The intellectual information system for management of geological and technical arrangements during oil field exploitation

    Science.gov (United States)

    Markov, N. G.; Vasilyeva, E. E.; Evsyutkin, I. V.

    2017-01-01

    The intellectual information system for management of geological and technical arrangements during oil fields exploitation is developed. Service-oriented architecture of its software is a distinctive feature of the system. The results of the cluster analysis of real field data received by means of this system are shown.

  15. Simulation of phase separation with large component ratio for oil-in-water emulsion in ultrasound field.

    Science.gov (United States)

    Wang, Heping; Li, Xiaoguang; Li, Yanggui; Geng, Xingguo

    2017-05-01

    This paper presents an exploration for separation of oil-in-water and coalescence of oil droplets in ultrasound field via lattice Boltzmann method. Simulations were conducted by the ultrasound traveling and standing waves to enhance oil separation and trap oil droplets. The focus was to the effect of ultrasound irradiation on oil-in-water emulsion properties in the standing wave field, such as oil drop radius, morphology and growth kinetics of phase separation. Ultrasound fields were applied to irradiate the oil-in-water emulsion for getting flocculation of the oil droplets in 420kHz case, and larger dispersed oil droplets and continuous phases in 2MHz and 10MHz cases, respectively. The separated phases started to rise along the direction of sound propagation after several periods. The rising rate of the flocks was significantly greater in ultrasound case than that of oil droplets in the original emulsion, indicating that ultrasound irradiation caused a rapid increase of oil droplet quantity in the progress of the separation. The separation degree was also significantly improved with increasing frequency or irradiation time. The dataset was rearranged for growth kinetics of ultrasonic phase separation in a plot by spherically averaged structure factor and the ratio of oil and emulsion phases. The analyses recovered the two different temporal regimes: the spinodal decomposition and domain growth stages, which further quantified the morphology results. These numerical results provide guidance for setting the optimum condition for the separation of oil-in-water emulsion in the ultrasound field.

  16. Spatial variations of hydrocarbon contamination and soil properties in oil exploring fields across China.

    Science.gov (United States)

    Liang, Yuting; Zhang, Xu; Wang, Jian; Li, Guanghe

    2012-11-30

    Successful site remediation is critically based on a comprehensive understanding of distribution of contaminants, soil physico-chemical and microbial properties in oil contaminated sites. One hundred and ten topsoils were sampled from seven typical oil fields in different geoclimate regions across north to south China to investigate the spatial variances of oil contaminations and soil parameters. Oil concentrations and compositions, soil geochemical properties and microbial populations were analyzed and statistic analysis methods were used to analyze the spatial pattern of soil variables. The results indicated that oil contaminations were serious in most oil exploring areas in China, especially with high levels of polycyclic aromatic hydrocarbons (PAHs) from petrogenic origin. Ordination analyses indicated a relatively distinct spatial pattern that all soil samples grouped mainly by geographic locations, instead of distributing along contamination or other geochemical variable gradient. Microbial populations were found to be statistically positively correlated with soil nitrogen, phosphorus and water content, and negatively correlated with salt pH and soluble salts (Phydrocarbon-contaminated fields across large spatial scales, which is important for the environmental protection and further remediation in oil contaminated sites according to local conditions. Copyright © 2012 Elsevier B.V. All rights reserved.

  17. The effect of thermotropic oil-displacing compound thickened Ninka on reservoir microflora and the composition of oil in Usinskoe oil field

    Science.gov (United States)

    Ovsyannikova, V. S.; Shcherbakova, A. G.; Guseva, Y. Z.; Altunina, L. K.; Chuykina, D. I.

    2016-11-01

    The work presents results of the study of the impact of thermotropic sol-forming compound thickened NINKA on enhanced oil recovery, stimulation of oil production, on the composition of crude oil, and on oil reservoir microflora sampled from reservoir fluids in the testing and reference areas of Usinskoe field. In vitro, the compound in the concentrations of 0.1-0.5% has a stimulating effect on the microflora, which is more pronounced in a low-mineralized environment. In reservoir conditions, after the injection of the compound, along with the appearance of nitrogen-containing components of the compound and products of its hydrolysis in the wellstream, some wells showed a significant increase in the number of heterotrophic and denitrifying microflora, which is indicative of a stimulating effect of the compound. The change in the composition of oil from these producing wells is due to the desorption of polar and high-molecular components and, to a lesser extent, to the redistribution of filtration flows.

  18. Process and economic model of in-field heavy oil upgrading using aqueous pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Thorsness, C. B., LLNL

    1997-01-21

    A process and economic model for aqueous pyrolysis in-field upgrading of heavy oil has been developed. The model has been constructed using the ASPEN PLUS chemical process simulator. The process features cracking of heavy oil at moderate temperatures in the presence of water to increase oil quality and thus the value of the oil. Calculations with the model indicate that for a 464 Mg/day (3,000 bbl/day) process, which increases the oil API gravity of the processed oil from 13.5{degree} to 22.4{degree}, the required value increase of the oil would need to be at least $2.80/Mg{center_dot}{degree}API($0.40/bbl{center_dot}{degree}API) to make the process economically attractive. This level of upgrading has been demonstrated in preliminary experiments with candidate catalysts. For improved catalysts capable of having the coke make and increasing the pyrolysis rate, a required price increase for the oil as low as $1.34/Mg{center_dot}{degree}API ($0.21/bbl{center_dot}{degree}API)has been calculated.

  19. Rapid detection of peanut oil adulteration using low-field nuclear magnetic resonance and chemometrics.

    Science.gov (United States)

    Zhu, Wenran; Wang, Xin; Chen, Lihua

    2017-02-01

    (1)H low-field nuclear magnetic resonance (LF-NMR) and chemometrics were employed to screen the quality changes of peanut oil (PEO) adulterated with soybean oil (SO), rapeseed oil (RO), or palm oil (PAO) in ratios ranging from 0% to 100%. Significant differences in the LF-NMR parameters, single component relaxation time (T2W), and peak area proportion (S21 and S22), were detected between pure and adulterated peanut oil samples. As the ratio of adulteration increased, the T2W, S21, and S22 changed linearly; however, the multicomponent relaxation times (T21 and T22) changed slightly. The established principal component analysis or discriminant analysis models can correctly differentiate authentic PEO from fake and adulterated samples with at least 10% of SO, RO, or PAO. The binary blends of oils can be clearly classified by discriminant analysis when the adulteration ratio is above 30%, illustrating possible applications in screening the oil species in peanut oil blends.

  20. Economic assessment of environmental impact in the course of oil field development and production

    Science.gov (United States)

    Tsibulnikova, M. R.; Kupriyanova, O. S.; Strelnikova, A. B.

    2015-11-01

    The article considers the variety of impacts that oil exploration and production operations have on the environment at different stages of the process. To provide accurate economic assessment, an oil field development project was designed, with various development options. These options being analyzed, the strategy with the minimal environmental impact was identified. This has allowed preparation of a guideline on how to prevent deterioration of the environment and to reduce the negative environmental impact

  1. In-situ combustion test on outcrops in Kramai oil field

    Energy Technology Data Exchange (ETDEWEB)

    Lang, S.

    1982-01-01

    An in-situ combustion test was performed in Kramai oil field, located in the northwestern border of the Zhungerer Basin, China. The main objectives of the test were to investigate directly the reservoir geology, the petrophysical properties of the reservoir rock, and the flow properties of oil, gas and water within the reservoir. The paper describes the test procedure, including the well pattern, the test pit, operation and inspection techniques, etc., and presents a general discussion of the results obtained.

  2. Isolation and characterization of Klebsiella oxytoca strain degrading crude oil from a Tunisian off-shore oil field.

    Science.gov (United States)

    Chamkha, Mohamed; Trabelsi, Yosra; Mnif, Sami; Sayadi, Sami

    2011-12-01

    A facultatively anaerobic, Gram-negative, mesophilic, moderately halotolerant, non-motile, and non-sporulated bacterium, designated strain BSC5 was isolated from an off-shore "Sercina" oil field, located near the Kerkennah island, Tunisia. Yeast extract was not required for growth. Phenotypic characteristics and phylogenetic analysis of the 16S rRNA gene sequence of strain BSC5 revealed that it was related to members of the genus Klebsiella, being most closely related to the type strain of K. oxytoca (99% sequence similarity). Strain BSC5 was capable of using aerobically the crude oil as substrate growth. The growth of strain BSC5 on crude oil was followed by measuring the OD(600 nm) and by enumeration of viable cells at different culture's time. GC-MS analysis showed that strain BSC5 was capable of degrading a wide range of aliphatic hydrocarbons from C(13) to C(30) . The biodegradation rate for n -alkanes reached 44% and 75%, after 20 and 45 days of incubation, respectively. Addition of the synthetic surfactant, Tween 80, accelerated the crude oil degradation. The biodegradation rate for n -alkanes reached 61% and 98%, after 20 and 45 days of incubation, respectively. Moreover, three aromatic compounds, p -hydroxybenzoate, protocatechuate and gentisate, were metabolized completely by strain BSC5 after 24 h, under aerobic conditions.

  3. Observed oil and gas field size distributions: A consequence of the discovery process and prices of oil and gas

    Science.gov (United States)

    Drew, L.J.; Attanasi, E.D.; Schuenemeyer, J.H.

    1988-01-01

    If observed oil and gas field size distributions are obtained by random samplings, the fitted distributions should approximate that of the parent population of oil and gas fields. However, empirical evidence strongly suggests that larger fields tend to be discovered earlier in the discovery process than they would be by random sampling. Economic factors also can limit the number of small fields that are developed and reported. This paper examines observed size distributions in state and federal waters of offshore Texas. Results of the analysis demonstrate how the shape of the observable size distributions change with significant hydrocarbon price changes. Comparison of state and federal observed size distributions in the offshore area shows how production cost differences also affect the shape of the observed size distribution. Methods for modifying the discovery rate estimation procedures when economic factors significantly affect the discovery sequence are presented. A primary conclusion of the analysis is that, because hydrocarbon price changes can significantly affect the observed discovery size distribution, one should not be confident about inferring the form and specific parameters of the parent field size distribution from the observed distributions. ?? 1988 International Association for Mathematical Geology.

  4. Genomic and genotoxic responses to controlled weathered-oil exposures confirm and extend field studies on impacts of the Deepwater Horizon oil spill on native killifish.

    Directory of Open Access Journals (Sweden)

    Whitney Pilcher

    Full Text Available To understand the ecotoxicological impacts of the Deepwater Horizon oil spill, field studies provide a context for ecological realism but laboratory-based studies offer power for connecting biological effects with specific causes. As a complement to field studies, we characterized genome-wide gene expression responses of Gulf killifish (Fundulus grandis to oil-contaminated waters in controlled laboratory exposures. Transcriptional responses to the highest concentrations of oiled water in the laboratory were predictive of field-observed responses that coincided with the timing and location of major oiling. The transcriptional response to the low concentration (∼ 10-fold lower than the high concentration was distinct from the high concentration and was not predictive of major oiling in the field. The high concentration response was characterized by activation of the molecular signaling pathway that facilitates oil metabolism and oil toxicity. The high concentration also induced DNA damage. The low concentration invoked expression of genes that may support a compensatory response, including genes associated with regulation of transcription, cell cycle progression, RNA processing, DNA damage, and apoptosis. We conclude that the gene expression response detected in the field was a robust indicator of exposure to the toxic components of contaminating oil, that animals in the field were exposed to relatively high concentrations that are especially damaging to early life stages, and that such exposures can damage DNA.

  5. Oil and reservoir core extracts compositional variations in the Kerkennah Ouest fields, Tunisia

    Energy Technology Data Exchange (ETDEWEB)

    Ghenma, R. [ETAP, Belvedere (Tunisia); LaFargue, E. [IFP, Malmaison (France)

    1995-08-01

    A suite of oils and reservoir core extracts from the Kerkennah oil fields in Tunisia has been analyzed by various geochemical techniques to elucidate the geological processes which cause variations in oil and extracts composition and their resulting fingerprinting in the different reservoirs of the field. The results obtained greatly helped in the understanding of filling directions which is valuable for future exploration of satellite fields. The oil pools studied are parts of a large geologic province ({open_quotes}the pelagienne plateforme{close_quotes}) where the main oil fields are limited by NW-SE major faults. The two main reservoirs we encountered in the carbonate series of Turonian and Eocene ages and the best reservoir qualities are found in the packstone and grainstone Nummulites facies. Numerous fractures we observed through the fields and we could demonstrate their influence on the filling history of the different fields as well as on the present oil production. Detailed analysis of the light hydrocarbons (C{sub 20-}) as well as the complete study of the C{sub 15+} hydrocarbons indicate compositional variations between the hydrocarbons stored in the Eocene and Turonian reservoirs. The core extracts from the two reservoirs also shows some variations with in particular maturity differences. Apparently the only possible source rock in the area is represented by the Bahloul formation of Turonian age. Within this scenario, we proposed the hypothesis of different behaviours of the main faults over geological time: a first period where the faults acted as conduits for hydrocarbon migration towards both Turonian and Eocene reservoirs and a second period where the faults became impervious to the hydrocarbons moving towards the Eocene reservoirs thus resulting in the storage of more mature hydrocarbons in the Turonian reservoirs only. Also of interest is the observation of different levels of homogenization in the Turonian reservoirs from one field to another.

  6. The economics of field abandonment in the UKCS. [Oil and gas fields in the United Kingdom continental shelf

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, A.G.

    1989-08-01

    The abandonment of oil and natural gas fields in the North Sea raises a number of economic issues. These are principally (a) the costs incurred in the abandonment operations, (b) the criteria to be employed in determining the timing of field abandonment, (c) the fiscal reliefs available for the abandonment expenditures, and (d) the (financial) security aspects of the operation. These topics are briefly discussed in this paper. (author).

  7. Investigations of Flare Gas Emissions in Taq Taq Oil Field on the Surrounding Land

    Directory of Open Access Journals (Sweden)

    Jafar A. Ali

    2014-11-01

    Full Text Available Environmental pollution caused by oil takes many different forms; one of the most damaging sources is simply the combustion of oil products, such as a well flare burn-off. This paper presents the results of a survey of the agriculture lands around the Taq Taq Oil Production Company. The aim of the survey was to determine the potential contamination caused by the gas emissions from the well flares. Taq Taq field is located in the Kurdistan Region of Iraq, 60 km north of the giant Kirkuk oil field, 85 km south-east of Erbil and 120 km north-west of Suleimani. Samples of soil were collected from several locations around the site and analyzed to determine the content of Polycyclic Aromatic Hydrocarbons PAH present. A gas chromatography linked to a mass spectrometry (GCMS machine was used for these measurements. The PAH contamination at each location of soil was determined and the 16-PAHs, as listed in the US Environmental Protection Agency (EPA documentation were investigated. The average content of total PAH in all samples of the agricultural soil was 0.654 mg·kg-1 with the concentrations ranging from 0.310 to 0.869 mg·kg-1. It was found that the PAH concentrations decreased with increasing distance from the TTOPCO oil field, indicating that pollution was evident, the area close to the field being more affected by the gas pollution.

  8. Programed oil generation of the Zubair Formation, Southern Iraq oil fields: Results from Petromod software modeling and geochemical analysis

    Science.gov (United States)

    Al-Ameri, T. K.; Pitman, J.; Naser, M.E.; Zumberge, J.; Al-Haydari, H. A.

    2011-01-01

    1D petroleum system modeling was performed on wells in each of four oil fields in South Iraq, Zubair (well Zb-47), Nahr Umr (well NR-9), West Qurna (well WQ-15 and 23), and Majnoon (well Mj-8). In each of these fields, deposition of the Zubair Formation was followed by continuous burial, reaching maximum temperatures of 100??C (equivalent to 0. 70%Ro) at depths of 3,344-3,750 m of well Zb-47 and 3,081. 5-3,420 m of well WQ-15, 120??C (equivalent to 0. 78%Ro) at depths of 3,353-3,645 m of well NR-9, and 3,391-3,691. 5 m of well Mj-8. Generation of petroleum in the Zubair Formation began in the late Tertiary, 10 million years ago. At present day, modeled transformation ratios (TR) indicate that 65% TR of its generation potential has been reached in well Zb-47, 75% TR in well NR-9 and 55-85% TR in West Qurna oil field (wells WQ-15 and WQ-23) and up to 95% TR in well Mj-8, In contrast, younger source rocks are immature to early mature (environment and consists of interbedded shales and porous and permeable sandstones. In Basrah region, the shales have total organic carbon of 0. 5-7. 0 wt%, Tmax 430-470??C and hydrogen indices of up to 466 with S2 = 0. 4-9. 4 of kerogen type II & III and petroleum potential of 0. 4-9. 98 of good hydrocarbon generation, which is consistent with 55-95% hydrocarbon efficiency. These generated hydrocarbons had charged (in part) the Cretaceous and Tertiary reservoirs, especially the Zubair Formation itself, in the traps formed by Alpine collision that closed the Tethys Ocean between Arabian and Euracian Plates and developed folds in Mesopotamian Basin 15-10 million years ago. These traps are mainly stratigraphic facies of sandstones with the shale that formed during the deposition of the Zubair Formation in transgression and regression phases within the main structural folds of the Zubair, Nahr Umr, West Qurna and Majnoon Oil fields. Oil biomarkers of the Zubair Formation Reservoirs are showing source affinity with mixed oil from the Upper

  9. The Goldsmith/Lakeshore Field : a case history of an Ontario Trenton oil pool

    Energy Technology Data Exchange (ETDEWEB)

    Coulter, S.; Waugh, G. [Talisman Energy Inc., Calgary, AB (Canada)

    2002-07-01

    The development of the Goldsmith/Lakeshore oil and gas field located in Mersea and Romney Townships in southwestern Ontario was described with reference to the geological, geophysical and engineering aspects of the field. It was discovered in 1985 and has since produced 5 MMSTB oil and 3 Bcf gas from the Middle Ordovician carbonates of the Trenton Group. A total of 40 wells currently produce about 700 bopd and 1 MMcfg/d. The field is expected to continue to make a significant contribution to Ontario's total oil production for many years. The remaining reserves are estimated at 2 MMSTB oil and 1 Bcf gas. The development history over the 17 year period can be sub-divided into 4 distinct phases: (1) the early years from 1985-1989, (2), the development phase from 1990-1993, (3) the mature phase from 1994-1997, and (4) the horizontal drilling phase from 1998-2002. This paper describes the heterogeneous nature of the reservoir and the changes in drilling and completion practices over the years. In particular, it describes in detail how Talisman Energy Ltd. used horizontal drilling to develop an extension of the field beneath Lake Erie. Talisman is currently evaluating options for future field development including field extensions along the trend, in-fill drilling, and stimulation work on existing wells to increase production and reserves. 6 refs., 34 figs.

  10. Identification, characterization and application of sulfide-oxidizing bacteria in oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Jenneman, G.E. [Phillips Petroleum Co., Bartlesville, OK (United States). Research and Development Dept; Gevertz, D. [Agouron Institute, La Jolla, CA (United States)

    2000-07-01

    The efforts being made to identify and characterize sulfide-oxidizing bacteria (SOB) in oil fields were described. The role of SOB in the cycling of sulfur in shallow oil reservoirs in Western Canada and Western Texas was also explained. Field tests from reservoirs where anaerobic sulfide oxidation can be potentially applied were also included in this presentation. Sulfides are not desirable in oil fields because they are toxic, corrosive and form insoluble metal sulfides. Nitrate has been found to stimulate the activity of indigenous, anaerobic SOB when amended to sulfide-laden sewage sludges and pond sediments. In this study sulfide-laden, produced brine was collected from a field and dispensed into sterile, anaerobic bottles and amended with potassium nitrate and sodium phosphate. Oxidation of the sulfide was monitored using colour as a means by which to detect oxidation. Results showed that sulfide-oxidizing activity in brines from the Coleville field in Western Canada is a result of autotrophic SOB. Sulfide-oxidizing activity in produced brines collected from Western Texas oil fields needed the addition of organic acids and yeast extract, suggesting oxidation by heterotrophic SOB.19 refs., 1 tab., 1 fig.

  11. Computational Flow Dynamic Simulation of Micro Flow Field Characteristics Drainage Device Used in the Process of Oil-Water Separation

    Directory of Open Access Journals (Sweden)

    Guangya Jin

    2017-01-01

    Full Text Available Aqueous crude oil often contains large amounts of produced water and heavy sediment, which seriously threats the safety of crude oil storage and transportation. Therefore, the proper design of crude oil tank drainage device is prerequisite for efficient purification of aqueous crude oil. In this work, the composition and physicochemical properties of crude oil samples were tested under the actual conditions encountered. Based on these data, an appropriate crude oil tank drainage device was developed using the principle of floating ball and multiphase flow. In addition, the flow field characteristics in the device were simulated and the contours and streamtraces of velocity magnitude at different nine moments were obtained. Meanwhile, the improvement of flow field characteristics after the addition of grids in crude oil tank drainage device was validated. These findings provide insights into the development of effective selection methods and serve as important references for oil-water separation process.

  12. Performance of Surfactant Methyl Ester Sulphonate solution for Oil Well Stimulation in reservoir sandstone TJ Field

    Science.gov (United States)

    Eris, F. R.; Hambali, E.; Suryani, A.; Permadi, P.

    2017-05-01

    Asphaltene, paraffin, wax and sludge deposition, emulsion and water blocking are kinds ofprocess that results in a reduction of the fluid flow from the reservoir into formation which causes a decrease of oil wells productivity. Oil well Stimulation can be used as an alternative to solve oil well problems. Oil well stimulation technique requires applying of surfactant. Sodium Methyl Ester Sulphonate (SMES) of palm oil is an anionic surfactant derived from renewable natural resource that environmental friendly is one of potential surfactant types that can be used in oil well stimulation. This study was aimed at formulation SMES as well stimulation agent that can identify phase transitions to phase behavior in a brine-surfactant-oil system and altered the wettability of rock sandstone and limestone. Performance of SMES solution tested by thermal stability test, phase behavioral examination and rocks wettability test. The results showed that SMES solution (SMES 5% + xylene 5% in the diesel with addition of 1% NaCl at TJformation water and SMES 5% + xylene 5% in methyl ester with the addition of NaCl 1% in the TJ formation water) are surfactant that can maintain thermal stability, can mostly altered the wettability toward water-wet in sandstone reservoir, TJ Field.

  13. Mosquito (Diptera: Culicidae) repellency field tests of essential oils from plants traditionally used in Laos.

    Science.gov (United States)

    Vongsombath, Chanda; Pålsson, Katinka; Björk, Lars; Borg-Karlson, Anna-Karin; Jaenson, Thomas G T

    2012-11-01

    Essential oils of Hyptis suaveolens (Lamiaceae), Croton roxburghii (Euphorbiaceae), and Litsea cubeba (Lauraceae) were tested in the field near Vientiane city, Lao PDR, on humans for repellent activity against mosquitoes. Landing mosquitoes were collected and later identified. The most abundant mosquitoes captured belonged to the genera Armigeres, Culex, and Aedes. All the plant oils tested at concentrations of 1.7 microg/cm(2), 3.3 microg/cm(2), and 6.3 microg/cm(2) were significantly more mosquito repellent than the negative control. Croton oil was significantly repellent against mosquitoes of the three genera at the highest (6.3 microg/cm(2)) concentration tested. Litsea oil was significantly repellent against Armigeres at all (1.7 microg/cm(2), 3.3 microg/cm(2), and 6.3 microg/cm(2)) concentrations tested. Hyptis oil was significantly repellent against Armigeres at 3.3 microg/cm(2) and 6.3 microg/cm(2) and against Culex at 1.7 microg/cm(2) and 6.3 microg/cm(2). The oils were analyzed for chemical content of volatiles, mainly terpenes. Main constituents were beta-pinene, sabinene, and 1,8-cineol from oils of the green parts of H. suaveolens; alpha-pinene, beta-pinene, and alpha-phellandrene from fresh bark of C. roxburghii; and alpha-pinene, beta-phellandrene, sabinene, and 1,8-cineol from fresh fruits of L. cubeba.

  14. Multivariate statisticalmethods applied to interpretation of saturated biomarkers (Velebit oil field, SE Pannonian Basin, Serbia

    Directory of Open Access Journals (Sweden)

    TATJANA SOLEVIC

    2006-07-01

    Full Text Available Twenty-five crude oils originating from the Velebit oil field (SE Pannonian Basin, the most important oil field in Serbia, were investigated. Saturated biomarkers (n-alkanes, isoprenoids, steranes and triterpanes were analyzed by gas chromatography-mass spectrometry (GC-MS. Based on the distribution and abundance of these compounds, a large number of source and maturation parameters were calculated, particularly those most often used in correlation studies of oils. The examined samples were classified according to their origin and level of thermal maturity using factor, cluster and discriminant analyses. According to the source and maturation parameters, combined factor and cluster analyses using the Ward method enabled the categorization of the investigated oils into three groups. The cluster Ward analysis was shown to be of greater susceptibility and reliability. However, in addition to the two aforementioned methods, K-Means cluster analysis and discriminant analysis were shown to be necessary for a more precise and detailed categorization in the case of a large number of samples in one group. Consequently, it was concluded that factor and cluster K-Means andWard analyses can generally be used for the interpretation of saturated biomarkers in correlation studies of oils, but the observed results have to be checked, i.e., confirmed by discriminant analysis.

  15. Field development planning for an offshore extra heavy oil in the Gulf of Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Garcia, G.; Anguiano-Rojas, J. [PEMEX Exploration and Production, Mexico City (Mexico)

    2009-07-01

    This paper presented a phased development strategy for an offshore extra-heavy oil development located in the Gulf of Mexico. The Ayatsil-1 oil field is located in an upper Cretaceous brecciated formation. One of the primary concerns of the project is the infrastructure that is needed to handle low reservoir temperatures and high viscosity, low gravity API oil. A delineation well was drilled in order to confirm the areal extension of the reservoir. The field contains an estimated 3.1 billion barrels of oil-in-place. The project will involve the installation of fixed platforms and production platforms. Electric submersible pumps (ESPs) and multiphase pumps will be used to transport the oil from between 17 to 25 wells. Analyses were conducted to determine transport mechanisms as well as gathering networks in both stationary and transitory regimes. The viscosity of live and dead oil in the reservoirs must be accurately measured in relation to temperature in order to define the artificial systems that will be used to reduce viscosity. Results from several studies will be used to determine the feasibility of various chemical, thermal, and diluent applications. 6 refs., 3 figs.

  16. NAFTA opportunities: Oil and gas field drilling machinery and services sector

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    The North American Free Trade Agreement (NAFTA) significantly improves market access in Mexico and Canada for U.S. exports of oil and gas field equipment. Foreign markets account for more than 80 percent of U.S. shipments of oil and gas field machinery. Foreign markets are expected to continue their importance to this industry, in the long term. Mexico and Canada are moderate-sized markets for U.S. exports of oilfield products. In 1992, U.S. exports of this equipment amounted to about $113 million to Mexico and $11 million to Canada.

  17. Cryogels for oil and gas field construction under the conditions of arctic zone

    Science.gov (United States)

    Altunina, L. K.; Manzhay, V. N.; Fufaeva, M. S.

    2016-11-01

    The results of investigation of elastic and thermal properties of cryogels filled with used mineral oil are presented. A new chemical-biological method for oil and gas field construction in the northern regions is proposed and tested. The field experiments carried out in the territory of Yamalo-Nenets Autonomous District are described. The formation of cryotropic polymer systems occurring at shallow freezing from 0 to -3°C and the impact of crystructured soil on the viability, enzymatic activity of native soil microflora and growth of perennial herbs have been investigated. Cryogels are harmless to humans and safe for the environment.

  18. Optimizing the power of transformer substations in electric supply to the oil fields of Western Siberia

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, I.A.; Kudryashov, R.A.; Novoselov, Yu.B.; Sud, I.N.

    1983-01-01

    The problems which come up in designing substations for electricity supply grids for the oil fields in Western Siberia in determining their capacity are examined. A technique is proposed for technical and economic selection of the capacity of substations with consideration of the specifications for design documentation. The issues of rating loads on transformer substations and their prediction are examined. A technique for considering the overloading capability of transformers and their wear at the design load is presented. An example of power drop of an oil field, 35/6 kilovolt voltage substation is cited.

  19. Rock mechanics related to Jurassic underburden at Valdemar oil field

    DEFF Research Database (Denmark)

    Foged, Niels

    1999-01-01

    .It has been initiated as a feasibility study of the North Jens-1 core 12 taken in the top Jurassic clay shale as a test specimens for integrated petrological, mineralogical and rock mechanical studies. Following topics are studied:(1) Pore pressure generation due to conversion of organic matter...... and deformation properties of the clay shale using the actual core material or outcrop equivalents.(3) Flushing mechanisms for oil and gas from source rocks due to possibly very high pore water pressure creating unstable conditions in deeply burried sedimentsThere seems to be a need for integrating the knowledge...... in a number of geosciences to the benefit of common understanding of important reservoir mechanisms. Rock mechanics and geotechnical modelling might be key points for this understanding of reservoir geology and these may constitute a platform for future research in the maturing and migration from the Jurassic...

  20. Role of interfacial rheological properties in oil field chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Lakatos-Szabo, J.; Lakatos, I.; Kosztin, B.

    1996-12-31

    Interfacial rheological properties of different Hungarian crude oil/water systems were determined in wide temperature and shear rate range and in presence of inorganic electrolytes, tensides, alkaline materials and polymers. The detailed laboratory study definitely proved that the interfacial rheological properties are extremely sensitive parameters towards the chemical composition of inmiscible formation liquids. Comparison and interpretation of the interfacial rheological properties may contribute significantly to extension of the weaponry of the reservoir characterization, better understanding of the displacement mechanism, development of the more profitable EOR/IOR methods, intensification of the surface technologies, optimization of the pipeline transportation and improvement of the refinery operations. It was evidenced that the interfacial rheology is an efficient and powerful detection technique, which may enhance the knowledge on formation, structure, properties and behaviour of interfacial layers. 17 refs., 18 figs., 2 tabs.

  1. Elastomers in mud motors for oil field applications

    Energy Technology Data Exchange (ETDEWEB)

    Hendrik, J. [Baker Hughes INTEQ GmbH, Celle (Germany)

    1997-08-01

    Mud motors, the most frequently used downhole drilling motors in modern drilling systems, are described in their application and function. The elastomeric liner in a mud motor acts as a huge continuous seal. Important properties of elastomers such as chemical resistance, fatigue resistance, mechanical strength, abrasion resistance, bonding to steel and processability are discussed. Advantages and disadvantages of NBR, HNBR, FKM, TFEP, and EPDM elastomers for mud motor applications are briefly described. The importance of drilling fluids and their physical and chemical impact on motor elastomers are described. Drilling fluids are categorized in: oil based-, synthetic-, and water based. Results of compatibility tests in the different drilling muds of the presented categories demonstrate the complexity of elastomer development. Elastomers with an equally good performance in all drilling muds are not available. Future developments and improvements are directed towards higher chemical resistance at higher service temperatures. This will be possible only with improved elastomer-to-metal bonding, increased mechanical and better dynamic properties.

  2. Application of bio-huff-`n`-puff technology at Jilin oil field

    Energy Technology Data Exchange (ETDEWEB)

    Xiu-Yuan Wang; Yan-Fed Xue; Gang Dai; Ling Zhao [Institute of Microbiology, Beijing (China)] [and others

    1995-12-31

    An enriched culture 48, capable of adapting to the reservoir conditions and fermenting molasses to produce gas and acid, was used as an inoculum for bio- huff-`n`-puff tests at Fuyu oil area of Jilin oil field. The production well was injected with water containing 4-6% (v/v) molasses and inoculum, and then shut in. After 15-21 days, the well was placed back in operation. A total of 44 wells were treated, of which only two wells showed no effects. The daily oil production of treated wells increased by 33.3-733.3%. Up to the end of 1994, the oil production was increased by 204 tons per well on average. Results obtained from various types of production wells were discussed.

  3. Hydrocarbon charging histories of the Ordovician reservoir in the Tahe oil field, Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    李纯泉; 陈红汉; 李思田; 张希明; 陈汉林

    2004-01-01

    The Ordovician reservoir of the Tahe oil field went through many tectonic reconstructions, and was characterized by multiple hydrocarbon chargings. The aim of this study was to unravel the complex charging histories. Systematic analysis of fluid inclusions was employed to complete the investigation. Fluorescence observation of oil inclusions under UV light, and microthermometry of both oil and aqueous inclusions in 105 core samples taken from the Ordovician reservoir indicated that the Ordovician reservoir underwent four oil chargings and a gas charging. The hydrocarbon chargings occurred at the late Hercynian, the Indo-Sinian and Yanshan, the early Himalaya, the middle Himalaya, and the late Himalaya,respectively. The critical hydrocarbon charging time was at the late Hercynian.

  4. Hydrocarbon charging histories of the Ordovician reservoir in the Tahe oil field, Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    李纯泉; 陈红汉; 李思田; 张希明; 陈汉林

    2004-01-01

    The Ordovician reservoir of the Tahe oil field went through many tectonic reconstructions, and was charac-terized by multiple hydrocarbon chargings. The aim of this study was to unravel the complex charging histories. Systematicanalysis of fluid inclusions was employed to complete the investigation. Fluorescence observation of oil inclusions underUV light, and microthermometry of both oil and aqueous inclusions in 105 core samples taken from the Ordovician reservoirindicated that the Ordovician reservoir underwent four oil chargings and a gas charging. The hydrocarbon chargings oc-curred at the late Hercynian, the Indo-Sinian and Yanshan, the early Himalaya, the middle Himalaya, and the late Himalaya,respectively. The critical hydrocarbon charging time was at the late Hercynian.

  5. Risk assessment of nonhazardous oil-field waste disposal in salt caverns.

    Energy Technology Data Exchange (ETDEWEB)

    Elcock, D.

    1998-03-10

    Salt caverns can be formed in underground salt formations incidentally as a result of mining or intentionally to create underground chambers for product storage or waste disposal. For more than 50 years, salt caverns have been used to store hydrocarbon products. Recently, concerns over the costs and environmental effects of land disposal and incineration have sparked interest in using salt caverns for waste disposal. Countries using or considering using salt caverns for waste disposal include Canada (oil-production wastes), Mexico (purged sulfates from salt evaporators), Germany (contaminated soils and ashes), the United Kingdom (organic residues), and the Netherlands (brine purification wastes). In the US, industry and the regulatory community are pursuing the use of salt caverns for disposal of oil-field wastes. In 1988, the US Environmental Protection Agency (EPA) issued a regulatory determination exempting wastes generated during oil and gas exploration and production (oil-field wastes) from federal hazardous waste regulations--even though such wastes may contain hazardous constituents. At the same time, EPA urged states to tighten their oil-field waste management regulations. The resulting restrictions have generated industry interest in the use of salt caverns for potentially economical and environmentally safe oil-field waste disposal. Before the practice can be implemented commercially, however, regulators need assurance that disposing of oil-field wastes in salt caverns is technically and legally feasible and that potential health effects associated with the practice are acceptable. In 1996, Argonne National Laboratory (ANL) conducted a preliminary technical and legal evaluation of disposing of nonhazardous oil-field wastes (NOW) into salt caverns. It investigated regulatory issues; the types of oil-field wastes suitable for cavern disposal; cavern design and location considerations; and disposal operations, closure and remediation issues. It determined

  6. Methodology for oil field development; Metodologia para o desenvolvimento de campos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Galeano, Yadira Diaz

    1998-07-01

    The main scope of this work is to study and develop a methodology which allows the elaboration of project for oil field development. There fore it is necessary to consider to consider the integration of the human, technological and economical issues that are important parameters in the engineering project. The spiral concept was applied for the project in order to coordinate, in a reasonable and logical way, the activities involved in the field development, as well as the hierarchical analysis method for the decision making process. The development of an oil field is divided in viability study, preliminary project, final project, project implementation, production and field abandonment cycles. The main components for each cycle are external aspects, environmental criteria, reservoir management, and drilling, completion and well workover, production systems, exportation systems, and risk and economical analysis. The proposed methodology establishes a general scheme for planning and it presents applicable procedures for any field. (author)

  7. Recent developments in reservoir engineering and their impact on oil and gas field development

    Energy Technology Data Exchange (ETDEWEB)

    Davies, R.H.; Niko, H. [Shell Internationale Petroleum Maatschappij BV, Den Haag (Netherlands)

    1996-12-31

    With much of the reservoir engineering development activities prior to 1986 being directed to new processes such as EOR, reservoir engineering of today has, like the other petroleum engineering disciplines, become part of an integrated effort to extract the maximum amount of oil from a reservoir. We will discuss some of the new developments in reservoir engineering which had a real impact on oil field operations in Shell and on the working practices of the individual reservoir engineers. Examples of recent advances in reservoir engineering are: (1) progress in the field of measuring residual oil saturations to water under representative conditions which will enable a more realistic assessment of trapped/bypassed oil in water floods such as those in large North Sea fields; (2) improved understanding of the production behaviour of horizontal wells based on analytical and numerical modelling which led to successful applications in Gabon and Oman; (3) advances in our understanding of production in naturally fractured reservoirs which provided the basis for a unique field experiment in the Natih Field in Oman; (4) understanding of the mechanism of fracturing in water injection wells, a process which has large cost-saving potential. The one factor largely responsible for the change in working practices of individual reservoir engineers is the availability of modern integrated IT technology. (author)

  8. Neutron scattering studies of crude oil viscosity reduction with electric field

    Science.gov (United States)

    Du, Enpeng

    topic. Dr. Tao with his group at Temple University, using his electro or magnetic rheological viscosity theory has developed a new technology, which utilizes electric or magnetic fields to change the rheology of complex fluids to reduce the viscosity, while keeping the temperature unchanged. After we successfully reduced the viscosity of crude oil with field and investigated the microstructure changing in various crude oil samples with SANS, we have continued to reduce the viscosity of heavy crude oil, bunker diesel, ultra low sulfur diesel, bio-diesel and crude oil and ultra low temperature with electric field treatment. Our research group developed the viscosity electrorheology theory and investigated flow rate with laboratory and field pipeline. But we never visualize this aggregation. The small angle neutron scattering experiment has confirmed the theoretical prediction that a strong electric field induces the suspended nano-particles inside crude oil to aggregate into short chains along the field direction. This aggregation breaks the symmetry, making the viscosity anisotropic: along the field direction, the viscosity is significantly reduced. The experiment enables us to determine the induced chain size and shape, verifies that the electric field works for all kinds of crude oils, paraffin-based, asphalt-based, and mix-based. The basic physics of such field induced viscosity reduction is applicable to all kinds of suspensions.

  9. Biogeographic patterns of microbial communities from different oil-contaminated fields in China

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Yuting; Li, Guanghe [School of Environment, Tsinghua University (China); Zhou, Ji zhong [Institute for Environmental Genomics, Department of Botany and Microbiology, University of Oklahoma (United States)], email: jzhou@ou.edu

    2011-07-01

    Some striking biological challenges of the 21st century include linking biodiversity to ecosystem functions, information scaling, and linking genomics to ecology. This paper discusses the biogeographic patterns of microbial communities from various oil-contaminated fields in China. Two kinds of high throughput approaches are used, open format and closed format. Key differences between them are outlined. The GeoChip, or functional gene array (FGA) approach is presented. This is a high throughput tool for linking community structure to functions. Its main advantages are its high resolution and detecting functions. This approach was applied to soils, bioreactors and ground waters, among others. Issues related to specificity, sensitivity and quantification are listed. An overview of the microarray analysis is given. This is applied to the BP oil spill. 100 samples were chosen from representative oil fields to study the biogeographic patterns of microbial communities in China. The complete study is presented with the results.

  10. Characteristics of enriched cultures for bio-huff-`n`-puff tests at Jilin oil field

    Energy Technology Data Exchange (ETDEWEB)

    Xiu-Yuan Wang; Gang Dai; Yan-Fen Xue; Shu-Hua Xie [Institute of Microbiology, Beijing (China)] [and others

    1995-12-31

    Three enriched cultures (48, 15a, and 26a), selected from more than 80 soil and water samples, could grow anaerobically in the presence of crude oil at 30{degrees}C and could ferment molasses to gases and organic acids. Oil recovery by culture 48 in the laboratory model experiment was enhanced by 25.2% over the original reserves and by 53.7% over the residual reserves. Enriched culture 48 was composed of at least 4 species belonging to the genera Eubacterium, Fusobacterium, and Bacteroides. This enriched culture was used as inoculum for MEOR field trials at Jilin oil field with satisfactory results. The importance of the role of these isolates in EOR was confirmed by their presence and behavior in the fluids produced from the microbiologically treated reservoir.

  11. Water management in Siri oil field in Iran: A comprehensive case study

    Energy Technology Data Exchange (ETDEWEB)

    Masoudi, Zahedzadeh M.; Abbasian, Ataei A.; Shokrollahzadeh, S.; Raadmehr, M.

    2006-03-15

    Successful water management and dealing with produced water is a crucial part of any oil and gas production scenarios. This paper investigates the role of comprehensive study in water management and produced water re-injection in an Iranian offshore oil field. Appropriate method can be chosen by taking into account various effective parameters such as reservoir properties, laboratory experiment, and learning from already done projects and etc. In this work, produced water reinjection in Siri oil field in Iran has been investigated by examining the effective parameters including reservoir characterization such as permeability, porosity, petrophysical properties as well as performing relevant laboratory experiments and reservoir parameters like aquifer support and carbonated rock reservoir issues. Finally, it was concluded that comprehensive study together with proper laboratory investigation has a significant effect in success of produced water re-injection process. (author) (tk)

  12. IMPACT OF OIL FIELD EXPLOITATION ON ECO-ENVIRONMENT OF THE DAQING LAKES

    Institute of Scientific and Technical Information of China (English)

    YU Shao-peng; LU Jin-fu; SUN Guang-you

    2003-01-01

    The Daqing lakes are located in the region with sub-humid continental monsoon climate. Through histori-cal comparison of the environment before and after oil field exploitation in the area, the paper analyses the impact of oilfield exploitation on the eco-environment of the lakes, including the impact of diversion works, drainage works, exploita-tion and utilization of groundwater, dropped crude oil and petrochemical wastewater on the lakes water body. The analy-sis shows that oil field exploitation caused serious pollution to soil in the lakes area and deterioration of the e-co-environment. The impact became more evident with passage of time, and the intensity varied with areas, gettingmore serious from west to east, which meant that the eastern part of the lakes were influenced much more seriously by thehuman activities. To improve the eco-environment of the Daqing lakes and make them sustainable utilization, the effec-tive protection measures should be taken.

  13. EOR-technology gives Dutch oil field in Schoonebeek a second life; EOR-technologie geeft olieveld Schoonebeek tweede leven

    Energy Technology Data Exchange (ETDEWEB)

    De Wit, P.

    2010-05-15

    One appealing example of new oil recovery techniques can be found in Schoonebeek, the Netherlands. At first only half of the oil in this field could be extracted until the field was closed in 1996. Thanks to the modern EOR(Enhanced Oil Recovery) steam injection the field is now given a second life. [Dutch] Een aansprekend voorbeeld van de nieuwe oliewinningstechnieken is te vinden in Schoonebeek. Aanvankelijk kon slechts de helft van de aanwezige olie uit het veld worden geproduceerd tot het veld in 1996 gesloten werd. Met moderne EOR (Enhanced Oil Recovery) stoominjectie krijgt het veld nu een tweede leven.

  14. The controlling factors of oil and gas charging and accumulation of Puguang gas field in the Sichuan Basin

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Combined with oil and gas transport and accumulation, structure-Iithology evolution history, and with geochemistry and synthesizing geology methods, this paper studies the oil and gas discharge history of Puguang large scale gas field and the main controlling factors of oil accumulation. The natural gas in Puguang gas field is mainly coal-derived gas and oil-racked gas. The main hydrocarbon is Upper Permian coal mudstone and Lower Silurian mud shale with organic material. Puguang gas field has gone through discharge and adjustment 3 times, and it has favorable palaeostructure location, high quality dredge and effectively conserving conditions.

  15. Casing and tubing design for sour oil and gas field

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y. [CCDC Drilling and Production Technology Research Inst., Guanghan (China). Drilling and Completion Research and Design Center; State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu (China); Lin, Y.; Shi, T.; Zhu, D. [State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu (China); Wang, Z.; You, X.; Zhang, G.; Liu, H. [CCDC Drilling and Production Technology Research Inst., Guanghan (China). Drilling and Completion Research and Design Center

    2009-07-01

    Environmental fractures are the main cause of casing and tubing yield failures in sour gas and oil wells. This paper discussed casing and tubing designs for high pressure high temperature (HPHT) environments containing hydrogen sulfide (H{sub 2}S), carbon dioxide (CO{sub 2}) and water wells. A fracture mechanics methods was used to establish yield design criterion for a conventional sulfur resistance casing T95 and a quasi-resistance casing C110. Sulfide stress corrosion (SSC) tests, A-uniaxial tensile tests, and double cantilever beam tests were conducted to determine the potential for failures caused by the unstable propagation of a pre-existing crack and failures caused by the initiation and stable growth of cracks. Elasto-plastic equations were developed to calculate the pressure at which a pipe will fail due to the propagation of a pre-existing sharp crack. Results of the tests indicated that the predictive fracture pressures for the C110 casing and tubing samples were lower than those observed for the T95 sample. 17 refs., 4 figs.

  16. INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Scott Hara

    2004-03-05

    The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the

  17. Preliminary Technical and Legal Evaluation of Disposing of Nonhazardous Oil Field Waste into Salt Caverns

    Energy Technology Data Exchange (ETDEWEB)

    Ayers, Robert C.; Caudle, Dan; Elcock, Deborah; Raivel, Mary; Veil, John; and Grunewald, Ben

    1999-01-21

    This report presents an initial evaluation of the suitability, feasibility, and legality of using salt caverns for disposal of nonhazardous oil field wastes. Given the preliminary and general nature of this report, we recognize that some of our findings and conclusions maybe speculative and subject to change upon further research on this topic.

  18. Norm in soil and sludge samples in Dukhan oil Field, Qatar state

    Energy Technology Data Exchange (ETDEWEB)

    Al-Kinani, A.T.; Hushari, M.; Al-Sulaiti, Huda; Alsadig, I.A., E-mail: mmhushari@moe.gov.qa [Radiation and Chemical Protection Department, Ministry of Environment, Doha (Qatar)

    2015-07-01

    The main objective of this work is to measure the activity concentrations of Naturally Occurring radioactive Materials (NORM) produced as a buy products in oil production. The analyses of NORM give available information for guidelines concerning radiation protection. Recently NORM subjected to restricted regulation issued by high legal authority at Qatar state. Twenty five samples of soil from Dukhan onshore oil field and 10 sludge samples collected from 2 offshore fields at Qatar state. High resolution low-level gamma-ray spectrometry used to measure gamma emitters of NORM. The activity concentrations of natural radionuclide in 22 samples from Dukhan oil field, were with average worldwide values . Only three soil samples have high activity concentration of Ra-226 which is more than 185 Bq/kg the exempted level for NORM in the Quatrain regulation. The natural radionuclide activity concentrations of 10 sludge samples from offshore oil fields was greater than 1100Bq/kg the exempted values of NORM set by Quatrain regulation so the sludge need special treatments. The average hazards indices (H{sub ex} , D , and Ra{sub eq}), for the 22 samples were below the word permissible values .This means that the human exposure to such material not impose any radiation risk. The average hazards indices (H{sub ex} , D , and Ra{sub eq}), for 3 soil samples and sludge samples are higher than the published maximal permissible. Thus human exposure to such material impose radiation risk. (author)

  19. Analytical Thermal Field Theory Applicable to Oil Hydraulic Fluid Film Lubrication

    DEFF Research Database (Denmark)

    Johansen, Per; Roemer, Daniel Beck; Pedersen, Henrik C.

    2014-01-01

    An analytical thermal field theory is derived by a perturbation series expansion solution to the energy conservation equation. The theory is valid for small values of the Brinkman number and the modified Peclet number. This condition is sufficiently satisfied for hydraulic oils, whereby the analy...

  20. Special ESP configurations designed to test and produce Yemen oil field. [Electric-Submersible Pump

    Energy Technology Data Exchange (ETDEWEB)

    Wilkie, D.I. (Canadian Occidental Petroleum Ltd., Calgary, Alberta (Canada))

    1993-09-27

    Innovative electric-submersible-pump (ESP) configurations were used in the exploration phase of a Yemen oil field discovered by Canadian Occidental Petroleum Ltd. Because of subnormal reservoir pressure, CanOxy developed the field with ESPs and had to install surface components that could operate at the high, 130 F., ambient temperatures common in Yemen. The field is in a remote area that has seen very little development. The reservoirs produce a medium-to-heavy crude with a low gas/oil ratio, typically less than 20 scf/bbl. Problems faced in evaluating the field included drilling through unconsolidated sands with high flow capacity and subnormal reservoir pressure. CanOxy had to develop the technology to test the wells during the exploration phase, and intends to use new, or at least uncommon technology, for producing the wells. The paper describes testing the wells, the electric generators and variable speed drives, and the use of these pumps on production wells.

  1. Development of Improved Oil Field Waste Injection Disposal Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Terralog Technologies

    2002-11-25

    The goals of this project have was to: (1) assemble and analyze a comprehensive database of past waste injection operations; (2) develop improved diagnostic techniques for monitoring fracture growth and formation changes; (3) develop operating guidelines to optimize daily operations and ultimate storage capacity of the target formation; and (4) to apply these improved models and guidelines in the field.

  2. Molecular dynamics and composition of crude oil by low-field nuclear magnetic resonance.

    Science.gov (United States)

    Jia, Zijian; Xiao, Lizhi; Wang, Zhizhan; Liao, Guangzhi; Zhang, Yan; Liang, Can

    2016-08-01

    Nuclear magnetic resonance (NMR) techniques are widely used to identify pure substances and probe protein dynamics. Oil is a complex mixture composed of hydrocarbons, which have a wide range of molecular size distribution. Previous work show that empirical correlations of relaxation times and diffusion coefficients were found for simple alkane mixtures, and also the shape of the relaxation and diffusion distribution functions are related to the composition of the fluids. The 2D NMR is a promising qualitative evaluation method for oil composition. But uncertainty in the interpretation of crude oil indicated further study was required. In this research, the effect of each composition on relaxation distribution functions is analyzed in detail. We also suggest a new method for prediction of the rotational correlation time distribution of crude oil molecules using low field NMR (LF-NMR) relaxation time distributions. A set of down-hole NMR fluid analysis system is independently designed and developed for fluid measurement. We illustrate this with relaxation-relaxation correlation experiments and rotational correlation time distributions on a series of hydrocarbon mixtures that employ our laboratory-designed downhole NMR fluid analyzer. The LF-NMR is a useful tool for detecting oil composition and monitoring oil property changes. Copyright © 2016 John Wiley & Sons, Ltd.

  3. Evaluation of miscible and immiscible CO2 injection in one of the Iranian oil fields

    Directory of Open Access Journals (Sweden)

    Aref Hashemi Fath

    2014-09-01

    Full Text Available Carbon dioxide (CO2 flooding is one of the most important methods for enhanced oil recovery (EOR because it not only increases oil recovery efficiency but also causes a reduction of greenhouse gas emissions. It is a very complex system, involving phase behavior that could increase the recovery of oil by means of swelling, evaporation and decreasing viscosity of the oil. In this study, a reservoir modeling approach was used to evaluate immiscible and miscible CO2 flooding in a fractured oil field. To reduce simulation time, we grouped fluid components into 10 pseudo-components. The 3-parameter, Peng–Robinson Equation of State (EOS was used to match PVT experimental data by using the PVTi software. A one-dimensional slim-tube model was defined using ECLIPSE 300 software to determine the minimum miscibility pressure (MMP for injection of CO2. We used FloGrid software for making a reservoir static model and the reservoir model was calibrated using manual and assisted history matching methods. Then various scenarios of natural depletion, immiscible and miscible CO2 injection have been simulated by ECLIPSE 300 software and then the simulation results of scenarios have been compared. Investigation of simulation results shows that the oil recovery factor in miscible CO2 injection scenario is more than other methods.

  4. Real-time oil-saturation monitoring in rock cores with low-field NMR.

    Science.gov (United States)

    Mitchell, J; Howe, A M; Clarke, A

    2015-07-01

    Nuclear magnetic resonance (NMR) provides a powerful suite of tools for studying oil in reservoir core plugs at the laboratory scale. Low-field magnets are preferred for well-log calibration and to minimize magnetic-susceptibility-induced internal gradients in the porous medium. We demonstrate that careful data processing, combined with prior knowledge of the sample properties, enables real-time acquisition and interpretation of saturation state (relative amount of oil and water in the pores of a rock). Robust discrimination of oil and brine is achieved with diffusion weighting. We use this real-time analysis to monitor the forced displacement of oil from porous materials (sintered glass beads and sandstones) and to generate capillary desaturation curves. The real-time output enables in situ modification of the flood protocol and accurate control of the saturation state prior to the acquisition of standard NMR core analysis data, such as diffusion-relaxation correlations. Although applications to oil recovery and core analysis are demonstrated, the implementation highlights the general practicality of low-field NMR as an inline sensor for real-time industrial process control.

  5. Horizontal well performance in Hassi-Messaoud oil field, Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Azzouguen, A.; Mazouzi, A.; Delhomme, A.; Deghmoum, A. [Sonatrach Inc., Hydra, (Algeria)

    2000-11-01

    The performance of non-conventional wells drilled in Hassi-Messaoud field in Algeria was analyzed using a pressure transient analysis technique called Tiab's direct synthesis (TDS). This technique makes it possible to determine the permeability tensor and the effective length of horizontal wells. Transient tests were analyzed using the TDS method for 33 non-conventional wells. For the first time it was possible to obtain the permeability tensor and the vertical permeability anisotropy. Future horizontal well drilling can now be optimized through sensitivity studies. The performance of slanted horizontal and multilateral wells was also compared. It was determined that because of their low risk, slanted wells are more appropriate for the Hassi-Messaoud field. Besides improving productivity, horizontal wells have the added advantage of providing substantial information regarding the geology of the field. It was determined that the two parameters that control production are the length and the vertical permeability. Several recommendations were presented regarding the well spacing. The recommendations were based on different geological models. 21 refs., 12 figs.

  6. Selection of chemical products for oil field applications in arctic environments

    Energy Technology Data Exchange (ETDEWEB)

    Powell, D.E.; VanderWende, E. [ARCO, Alaska, Inc., Anchorage, AK (United States)

    1996-08-01

    The Kuparuk Oil Field is located on the North Slope of Alaska, well above the Arctic Circle. Kuparuk uses chemicals for a variety of different oil production needs, including corrosion inhibition, emulsion breaking, defoaming, biofouling control, and scale inhibition. The North Slope`s isolated location demands unique logistical support, but it is otherwise accessible by unpaved road and has extensive air service. The Arctic climate provides difficult challenges and requirements for any chemical selection. This paper describes some criteria and practical experiences related to selecting the proper chemical products to be used in the Arctic environment.

  7. Increasing heavy oil reserves in the Wilmington Oil Field through advanced reservoir characterization and thermal production technologies. Annual report, March 30, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    The objective of this project is to increase heavy oil reserves in a portion of the Wilmington Oil Field, near Long Beach, California, by implementing advanced reservoir characterization and thermal production technologies. Based on the knowledge and experience gained with this project, these technologies are intended to be extended to other sections of the Wilmington Oil Field, and, through technology transfer, will be available to increase heavy oil reserves in other slope and basin clastic (SBC) reservoirs. The project involves implementing thermal recovery in the southern half of the Fault Block II-A Tar zone. The existing steamflood in Fault Block II-A has been relatively inefficient due to several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery efficiency and reduce operating costs.

  8. Electric field dependent dielectric response of alumina/silicone oil colloids

    Science.gov (United States)

    Magallon, Louis; Tsui, Stephen

    2014-03-01

    We investigate the dielectric response of a mixture of alumina nanopowder and silicone oil. Frequency and electric field dependent measurements of another insulating colloid, i.e., urea-coated Ba0.8Rb0.4TiO(C2O4)2 nanoparticles immersed in silicone oil, revealed universal dielectric response (UDR) characteristics and, with the application of high voltage, a negative capacitance. Alumina in silicone oil represents a simpler system in which to perform similar dielectric investigation. This colloid is sandwiched in a parallel plate capacitor cell, and the complex impedance is measured via lock-in amplifier at various frequencies and applied dc biases. Furthermore, we will compare and discuss the dielectric behaviors of different sized suspended alumina particles.

  9. Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications

    Directory of Open Access Journals (Sweden)

    Albina Mukhametshina

    2013-01-01

    Full Text Available Viscosity is a major obstacle in the recovery of low API gravity oil resources from heavy oil and bitumen reservoirs. While thermal recovery is usually considered the most effective method for lowering viscosity, for some reservoirs introducing heat with commonly implemented thermal methods is not recommended. For these types of reservoirs, electromagnetic heating is the recommended solution. Electromagnetic heating targets part of the reservoir instead of heating the bulk of the reservoir, which means that the targeted area can be heated up more effectively and with lower heat losses than with other thermal methods. Electromagnetic heating is still relatively new and is not widely used as an alternate or addition to traditional thermal recovery methods. However, studies are being conducted and new technologies proposed that could help increase its use. Therefore, the objective of this study is to investigate the recovery of heavy oil and bitumen reservoirs by electromagnetic heating through the review of existing laboratory studies and field trials.

  10. Quantitative calculation of GOR of complex oil-gas-water systems with logging data: A case study of the Yingdong Oil/Gas Field in the Qaidam Basin

    Directory of Open Access Journals (Sweden)

    Sima Liqiang

    2014-12-01

    Full Text Available In the Yingdong Oil/Gas Field of the Qaidam Basin, multiple suites of oil-gas-water systems overlie each other vertically, making it difficult to accurately identify oil layers from gas layers and calculate gas-oil ratio (GOR. Therefore, formation testing and production data, together with conventional logging, NMR and mud logging data were integrated to quantitatively calculate GOR. To tell oil layers from gas layers, conventional logging makes use of the excavation effect of compensated neutron log, NMR makes use of the different relaxation mechanisms of light oil and natural gas in large pores, while mud logging makes use of star chart of gas components established based on available charts and mathematical statistics. In terms of the quantitative calculation of GOR, the area ratio of the star chart of gas components was first used in GOR calculation. The study shows that: (1 conventional logging data has a modest performance in distinguishing oil layers from gas layers due to the impacts of formation pressure, hydrogen index (HI, shale content, borehole conditions and invasion of drilling mud; (2 NMR is quite effective in telling oil layers from gas layers, but cannot be widely used due to its high cost; (3 by contrast, the star chart of gas components is the most effective in differentiating oil layers from gas layers; and (4 the GOR calculated by using the area ratio of star chart has been verified by various data such as formation testing data, production data and liquid production profile.

  11. Third oil field just on stream in Dutch sector of North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, J.L.

    1984-01-01

    Three oil-producing fields are now onstream in the Dutch sector of the North Sea, an area which until about three years ago produced only natural gas. Union Oil Company of The Netherlands and Nedlloyd Energy B.V. are partners in the three fields, located in Block Q/1. Union is operator. Oil was first discovered in 1979 in an exploratory well about 40 km west of Den Helder. Confirmation drilling established the Helm field. About a year later, Helder field was discovered 6 km northwest of Helm. Production licenses for the two fields were granted in mid-1981 and production began from both fields in late September 1982. A third field in the Q/1 block, Hoorn, was discovered in 1980 and went onstream at the end of July 1983. In late summer 1983, Helm and Helder were producing a total of about 15,000 b/d, and Hoorn output was up to about 20,000 b/d one month after coming onstream. Development of the finds moved fast; for example, Hoorn field was put onstream 37 days ahead of schedule, according to a Union spokesman. Several factors were responsible for meeting--or beating--construction and development schedules, including: Cooperation of the Dutch government made permitting and other procedures move quickly. An integrated deck concept was used for platform design, reducing fabrication time and offshore construction time. Platforms for all three fields were identical, with only minor modifications made to handle different throughputs. Full approval to proceed with the development of Helm and Helder was obtained in July 1981, jackets and deck were delivered 1 year later and installed in August 1982. The Hoorn platform deck was delivered in June 1983, and started up at the end of July.

  12. Mapping three-dimensional oil distribution with π-EPI MRI measurements at low magnetic field

    Science.gov (United States)

    Li, Ming; Xiao, Dan; Romero-Zerón, Laura; Marica, Florea; MacMillan, Bryce; Balcom, Bruce J.

    2016-08-01

    Magnetic resonance imaging (MRI) is a robust tool to image oil saturation distribution in rock cores during oil displacement processes. However, a lengthy measurement time for 3D measurements at low magnetic field can hinder monitoring the displacement. 1D and 2D MRI measurements are instead often undertaken to monitor the oil displacement since they are faster. However, 1D and 2D images may not completely reflect the oil distribution in heterogeneous rock cores. In this work, a high-speed 3D MRI technique, π Echo Planar Imaging (π-EPI), was employed at 0.2 T to monitor oil displacement. Centric scan interleaved sampling with view sharing in k-t space was employed to improve the temporal resolution of the π-EPI measurements. A D2O brine was employed to distinguish the hydrocarbon and water phases. A relatively homogenous glass bead pack and a heterogeneous Spynie core plug were employed to show different oil displacement behaviors. High quality 3D images were acquired with π-EPI MRI measurements. Fluid quantification with π-EPI compared favorably with FID, CPMG, 1D-DHK-SPRITE, 3D Fast Spin Echo (FSE) and 3D Conical SPRITE measurements. π-EPI greatly reduced the gradient duty cycle and improved sensitivity, compared to FSE and Conical SPRITE measurements, enabling dynamic monitoring of oil displacement processes. For core plug samples with sufficiently long lived T2, T2∗, π-EPI is an ideal method for rapid 3D saturation imaging.

  13. Effect of flaring of natural gas in oil fields of Assam on rice cultivation.

    Science.gov (United States)

    Sharma, K K; Hazarika, S; Kalita, B; Sharma, B

    2011-07-01

    Assam (India) is endowed with natural resources like oil, coal and natural gas. The crude oil, one of the most precious natural resources, is found in the districts of upper Assam. During the process of extraction of crude oil, low-pressure natural gas is burnt in the air. Most of the oil wells in upper Assam are located near rice fields and therefore, rice crop grown near the oil wells is exposed to light uninterruptedly causing grain sterility resulting significant loss in grain yield. To identify promising varieties for these areas, we studied the effect of flare on rice varieties with different photoperiod sensitivity. The high light intensity and increased light hours were the factors responsible for substantial loss in grain yield near the flare resulting from delay in flower initiation, reduction of panicle length, having less number of grains per panicle and more grain sterility. To prevent significant loss in yield, photoperiod-sensitive traditional and improved rice varieties should not be grown up to the distance of 80 and 100 m, respectively from the boundary wall of the flare pit. Modern weakly-photoperiod sensitive varieties like Ranjti and Mahsuri can be grown 40 m away from the wall while modern photoperiod insensitive variety like Jaya, can be cultivated 20 m away from the wall without significant loss in yield.

  14. Effect of Magnetic Field on Tribological Properties of Lubri-cating Oils with and without Tricresyl Phosphate

    Institute of Scientific and Technical Information of China (English)

    Jiang Zeqi; Fang Jianhua; Chen Boshui; Zheng Zhe; Li Hao; Xu Lai

    2016-01-01

    Tribological properties of neat 150 SN mineral base oil and the oils doped with different contents of tricresyl phosphate (TCP) under magnetic field or non-magnetic field were evaluated on a four-ball tribotester, on which an external magnetic field was applied. Furthermore, the morphology and the tribochemical characteristics of the worn surfaces were examined with a scanning electron microscope (SEM) and an X-ray photoelectron spectrograph (XPS). The tribological test results showed that the magnetic field improved anti-wear properties but impaired the friction-reducing properties of neat base oil and the TCP-doped oils. The worn surfaces tested in magnetic field were characterized by a slighter wear than those tested in normal condition, especially for the surfaces lubricated with the TCP-doped oils. Furthermore, the results of XPS analysis indicated that tribochemical films on the surfaces tested with TCP-doped oils were mainly composed of ferric-containing compounds such as Fe2O3, Fe3O4 and FePO4. Under the influence of a magnetic field, the atomic concentrations of oxygen and phosphorous in the frictional sub-surfaces were higher than those without magnetic impact. Thus it can be in-ferred that the improved anti-wear properties and impaired friction-reducing capabilities of lubricating oils with TCP under a magnetic field were related to the diffusion of phosphorus and oxygen into the substrate induced by magnetism.

  15. Applications of advanced petroleum production technology and water alternating gas injection for enhanced oil recovery - Mattoon Oil Field, Illinois. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Baroni, M. [American Oil Recovery, Inc., Decatur, IL (United States)

    1995-09-01

    Phase I results of a C0{sub 2}-assisted oil recovery demonstration project in selected Cypress Sandstone reservoirs at Mattoon Field, Illinois are reported. The design and scope of this project included C0{sub 2} injectvity testing in the Pinnell and Sawyer units, well stimulaton treatments with C0{sub 2} in the Strong unit and infill well drilling, completion and oil production. The field activities were supported by extensive C0{sub 2}-oil-water coreflood experiments, CO{sub 2} oil-phase interaction experiments, and integrated geologic modeling and reservoir simulations. The progress of the project was made public through presentations at an industry meeting and a DOEs contractors` symposium, through quarterly reports and one-to-one consultations with interested operators. Phase II of this project was not implemented. It would have been a water-alternating-gas (WAG) project of longer duration.

  16. Field guide on reduction and disposal of waste from oil refineries and marketing installations

    Energy Technology Data Exchange (ETDEWEB)

    Dando, D.A.J.; Bossand, B.; Lilie, R.H.; Ooms, A.C.; Sutherland, H.

    1990-07-01

    The field guide has been written primarily for those in the oil refining and marketing industry who have responsibility for the management of waste and its disposal. It should also provide useful information to the authorities who exercise legal control over these activities. It lists the types of wastes commonly encountered in the industry and highlights techniques for minimizing the quantities generated. Guidance is given on the methods of pre-treatment and disposal, together with information on how to select and monitor waste facilities and contractors, to ensure a high quality and safe disposal operation. Information is also provided on documentation and labelling of waste cargoes, and reference is made to legislation and sources of additional information. While use of the field guide cannot guarantee a problem-free operation, it will minimize the risks involved in disposal of waste materials from oil industry installations.

  17. Use of the truncated shifted Pareto distribution in assessing size distribution of oil and gas fields

    Science.gov (United States)

    Houghton, J.C.

    1988-01-01

    The truncated shifted Pareto (TSP) distribution, a variant of the two-parameter Pareto distribution, in which one parameter is added to shift the distribution right and left and the right-hand side is truncated, is used to model size distributions of oil and gas fields for resource assessment. Assumptions about limits to the left-hand and right-hand side reduce the number of parameters to two. The TSP distribution has advantages over the more customary lognormal distribution because it has a simple analytic expression, allowing exact computation of several statistics of interest, has a "J-shape," and has more flexibility in the thickness of the right-hand tail. Oil field sizes from the Minnelusa play in the Powder River Basin, Wyoming and Montana, are used as a case study. Probability plotting procedures allow easy visualization of the fit and help the assessment. ?? 1988 International Association for Mathematical Geology.

  18. The drilling of a horizontal well in a mature oil field

    Energy Technology Data Exchange (ETDEWEB)

    Rougeot, J.E.; Lauterbach, K.A.

    1991-01-01

    This report documents the drilling of a medium radius horizontal well in the Bartlesville Sand of the Flatrock Field, Osage County, Oklahoma by Rougeot Oil and Gas Corporation (Rougeot) of Sperry, Oklahoma. The report includes the rationale for selecting the particular site, the details of drilling the well, the production response, conclusions reached, and recommendations made for the future drilling of horizontal wells. 11 figs., 2 tabs.

  19. Risk assessment of nonhazardous oil-field waste disposal in salt caverns.

    Energy Technology Data Exchange (ETDEWEB)

    Elcock, D.

    1998-03-05

    In 1996, Argonne National Laboratory (ANL) conducted a preliminary technical and legal evaluation of disposing of nonhazardous oil-field wastes (NOW) into salt caverns. Argonne determined that if caverns are sited and designed well, operated carefully, closed properly, and monitored routinely, they could be suitable for disposing of oil-field wastes. On the basis of these findings, Argonne subsequently conducted a preliminary evaluation of the possibility that adverse human health effects (carcinogenic and noncarcinogenic) could result from exposure to contaminants released from the NOW disposed of in domal salt caverns. Steps used in this evaluation included the following: identifying potential contaminants of concern, determining how humans could be exposed to these contaminants, assessing contaminant toxicities, estimating contaminant intakes, and calculating human cancer and noncancer risk estimates. Five postclosure cavern release scenarios were assessed. These were inadvertent cavern intrusion, failure of the cavern seal, failure of the cavern through cracks, failure of the cavern through leaky interbeds, and a partial collapse of the cavern roof. Assuming a single, generic, salt cavern and generic oil-field wastes, potential human health effects associated with constituent hazardous substances (arsenic, benzene, cadmium, and chromium) were assessed under each of these scenarios. Preliminary results provided excess cancer risk and hazard index (referring to noncancer health effects) estimates that were well within the US Environmental Protection Agency (EPA) target range for acceptable exposure risk levels. These results led to the preliminary conclusion that from a human health perspective, salt caverns can provide an acceptable disposal method for nonhazardous oil-field wastes.

  20. Short chain aliphatic acid anions in oil field waters and their contribution to the measured alkalinity

    Science.gov (United States)

    Willey, L.M.; Kharaka, Y.K.; Presser, T.S.; Rapp, J.B.; Barnes, I.

    1975-01-01

    High alkalinity values found in some formation waters from Kettleman North Dome oil field are due chiefly to acetate and propionate ions, with some contribution from higher molecular weight organic acid ions. Some of these waters contain no detectable bicarbonate alkalinity. For waters such as these, high supersaturation with respect to calcite will be incorrectly indicated by thermodynamic calculations based upon carbonate concentrations inferred from traditional alkalinity measurements. ?? 1975.

  1. Effect of Kuwait oil field fires on human comfort and environment in Jubail, Saudi Arabia

    Science.gov (United States)

    Riley, James J.; Hicks, Neal G.; Thompson, T. Lewis

    1992-03-01

    The plumes from the Kuwait oil field fires reduced hemispheric (total) solar radiation by 26 36% during January June 1991 in Jubail (300 km SE of Kuwait City), Saudi Arabia. Residents feel noticeably cooler even though air temperatures have not been lowered significantly (up to June 1991). These observations support human comfort theories and demonstrate the importance of shade to comfort. The desirability of complete solar radiation measurements, including those of diffuse radiation, is indicated.

  2. Static Electric Field Mapping Using a Mosquito Racket and Baby Oil

    Science.gov (United States)

    Rediansyah, Herfien; Khairurrijal; Viridi, Sparisoma

    2015-01-01

    The aim of this research was to design a simple experimental device to see electric field force lines using common components which are readily available in everyday life. A solution of baby oil was placed in a plastic container, 4.5 × 4.5 × 1 inches, with both ends of the electrodes (metal wire) immersed in the solution at a depth of 0.2 inches.…

  3. Static Electric Field Mapping Using a Mosquito Racket and Baby Oil

    Science.gov (United States)

    Rediansyah, Herfien; Khairurrijal; Viridi, Sparisoma

    2015-01-01

    The aim of this research was to design a simple experimental device to see electric field force lines using common components which are readily available in everyday life. A solution of baby oil was placed in a plastic container, 4.5 × 4.5 × 1 inches, with both ends of the electrodes (metal wire) immersed in the solution at a depth of 0.2 inches.…

  4. Disposal of NORM-Contaminated Oil Field Wastes in Salt Caverns

    Energy Technology Data Exchange (ETDEWEB)

    Blunt, D.L.; Elcock, D.; Smith, K.P.; Tomasko, D.; Viel, J.A.; and Williams, G.P.

    1999-01-21

    In 1995, the U.S. Department of Energy (DOE), Office of Fossil Energy, asked Argonne National Laboratory (Argonne) to conduct a preliminary technical and legal evaluation of disposing of nonhazardous oil field waste (NOW) into salt caverns. That study concluded that disposal of NOW into salt caverns is feasible and legal. If caverns are sited and designed well, operated carefully, closed properly, and monitored routinely, they can be a suitable means of disposing of NOW (Veil et al. 1996). Considering these findings and the increased U.S. interest in using salt caverns for NOW disposal, the Office of Fossil Energy asked Argonne to conduct further research on the cost of cavern disposal compared with the cost of more traditional NOW disposal methods and on preliminary identification and investigation of the risks associated with such disposal. The cost study (Veil 1997) found that disposal costs at the four permitted disposal caverns in the United States were comparable to or lower than the costs of other disposal facilities in the same geographic area. The risk study (Tomasko et al. 1997) estimated that both cancer and noncancer human health risks from drinking water that had been contaminated by releases of cavern contents were significantly lower than the accepted risk thresholds. Since 1992, DOE has funded Argonne to conduct a series of studies evaluating issues related to management and disposal of oil field wastes contaminated with naturally occurring radioactive material (NORM). Included among these studies were radiological dose assessments of several different NORM disposal options (Smith et al. 1996). In 1997, DOE asked Argonne to conduct additional analyses on waste disposal in salt caverns, except that this time the wastes to be evaluated would be those types of oil field wastes that are contaminated by NORM. This report describes these analyses. Throughout the remainder of this report, the term ''NORM waste'' is used to mean ''oil

  5. CO2 Storage and Enhanced Oil Recovery: Bald Unit Test Site, Mumford Hills Oil Field, Posey County, Indiana

    Energy Technology Data Exchange (ETDEWEB)

    Frailey, Scott M. [Illinois State Geological Survey, Champaign, IL (United States); Krapac, Ivan G. [Illinois State Geological Survey, Champaign, IL (United States); Damico, James R. [Illinois State Geological Survey, Champaign, IL (United States); Okwen, Roland T. [Illinois State Geological Survey, Champaign, IL (United States); McKaskle, Ray W. [Illinois State Geological Survey, Champaign, IL (United States)

    2012-03-30

    The Midwest Geological Sequestration Consortium (MGSC) carried out a small-scale carbon dioxide (CO2) injection test in a sandstone within the Clore Formation (Mississippian System, Chesterian Series) in order to gauge the large-scale CO2 storage that might be realized from enhanced oil recovery (EOR) of mature Illinois Basin oil fields via miscible liquid CO2 flooding.

  6. Souring in low-temperature surface facilities of two high-temperature Argentinian oil fields.

    Science.gov (United States)

    Agrawal, Akhil; An, Dongshan; Cavallaro, Adriana; Voordouw, Gerrit

    2014-09-01

    Produced waters from the Barrancas and Chihuido de la Salina (CHLS) fields in Argentina had higher concentrations of sulfate than were found in the injection waters, suggesting that the formation waters in these reservoirs had a high sulfate concentration and that sulfate-reducing bacteria were inactive downhole. Incubation of produced waters with produced oil gave rapid reduction of sulfate to sulfide (souring) at 37 °C, some at 60 °C, but none at 80 °C. Alkylbenzenes and alkanes served as electron donor, especially in incubations with CHLS oil. Dilution with water to decrease the ionic strength or addition of inorganic phosphate did not increase souring at 37 or 60 °C. These results indicate that souring in these reservoirs is limited by the reservoir temperature (80 °C for the Barrancas and 65-70 °C for the CHLS field) and that souring may accelerate in surface facilities where the oil-water mixture cools. As a result, significant sulfide concentrations are present in these surface facilities. The activity and presence of chemolithotrophic Gammaproteobacteria of the genus Thiomicrospira, which represented 85% of the microbial community in a water plant in the Barrancas field, indicated reoxidation of sulfide and sulfur to sulfate. The presence of these bacteria offers potential for souring control by microbial oxidation in aboveground facilities, provided that formation of corrosive sulfur can be avoided.

  7. Risk analyses for disposing nonhazardous oil field wastes in salt caverns

    Energy Technology Data Exchange (ETDEWEB)

    Tomasko, D.; Elcock, D.; Veil, J.; Caudle, D.

    1997-12-01

    Salt caverns have been used for several decades to store various hydrocarbon products. In the past few years, four facilities in the US have been permitted to dispose nonhazardous oil field wastes in salt caverns. Several other disposal caverns have been permitted in Canada and Europe. This report evaluates the possibility that adverse human health effects could result from exposure to contaminants released from the caverns in domal salt formations used for nonhazardous oil field waste disposal. The evaluation assumes normal operations but considers the possibility of leaks in cavern seals and cavern walls during the post-closure phase of operation. In this assessment, several steps were followed to identify possible human health risks. At the broadest level, these steps include identifying a reasonable set of contaminants of possible concern, identifying how humans could be exposed to these contaminants, assessing the toxicities of these contaminants, estimating their intakes, and characterizing their associated human health risks. The contaminants of concern for the assessment are benzene, cadmium, arsenic, and chromium. These were selected as being components of oil field waste and having a likelihood to remain in solution for a long enough time to reach a human receptor.

  8. INCREASING WATERFLOOD RESERVES IN THE WILMINGTON OIL FIELD THROUGH IMPROVED RESERVOIR CHARACTERIZATION AND RESERVOIR MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    Scott Walker; Chris Phillips; Roy Koerner; Don Clarke; Dan Moos; Kwasi Tagbor

    2002-02-28

    This project increased recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project. This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate. Although these reservoirs have been waterflooded over 40 years, researchers have found areas of remaining oil saturation. Areas such as the top sand in the Upper Terminal Zone Fault Block V, the western fault slivers of Upper Terminal Zone Fault Block V, the bottom sands of the Tar Zone Fault Block V, and the eastern edge of Fault Block IV in both the Upper Terminal and Lower Terminal Zones all show significant remaining oil saturation. Each area of interest was uncovered emphasizing a different type of reservoir characterization technique or practice. This was not the original strategy but was necessitated by the different levels of progress in each of the project activities.

  9. Increasing Waterflood Reserves in the Wilmington Oil Field Through Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Chris Phillips; Dan Moos; Don Clarke; John Nguyen; Kwasi Tagbor; Roy Koerner; Scott Walker

    1997-04-10

    This project is intended to increase recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project.

  10. Residual-oil-saturation-technology test, Bell Creek Field, Montana. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-06-01

    A field test was conducted of the technology available to measure residual oil saturation following waterflood secondary oil recovery processes. The test was conducted in a new well drilled solely for that purpose, located immediately northwest of the Bell Creek Micellar Polymer Pilot. The area where the test was conducted was originally drilled during 1968, produced by primary until late 1970, and was under line drive waterflood secondary recovery until early 1976, when the area was shut in at waterflood depletion. This report presents the results of tests conducted to determine waterflood residual oil saturation in the Muddy Sandstone reservoir. The engineering techniques used to determine the magnitude and distribution of the remaining oil saturation included both pressure and sidewall cores, conventional well logs (Dual Laterolog - Micro Spherically Focused Log, Dual Induction Log - Spherically Focused Log, Borehole Compensated Sonic Log, Formation Compensated Density-Compensated Neutron Log), Carbon-Oxygen Logs, Dielectric Logs, Nuclear Magnetism Log, Thermal Decay Time Logs, and a Partitioning Tracer Test.

  11. Preliminary hydrocarbon analysis of crude oils from Umutu/Bomu fields, south west Niger Delta Nigeria

    Directory of Open Access Journals (Sweden)

    M.C. Onojake

    2013-12-01

    Full Text Available Seven different crude oil samples were collected from two oil fields in the Niger Delta Nigeria. The bulk properties of these crude oils which include API gravity, reid vapour pressure; kinematic viscosity, dynamic viscosity, moisture, gum content and cloud point were analysed. Aliphatic biomarkers were used as supporting tool to deduce the geochemical characteristics such as thermal maturity, depositional environments, source of organic matter and extent of biodegradation. Results show that API° gravity ranged from 29.00° to 85.00°, specific gravity 0.65 to 0.88, 3.00 to 9.00, reid vapour pressure 3.00 to 9.00 kPa, kinematic viscosity 0.90 to 10.10 cSt, dynamic viscosity 0.70 to 8.90 cP, moisture content 0.13% to 26.00%, gum content 6.27 to 45.84 mg/L, cloud point 3.00 to 12.00 °C, pour point −7.00 to 4.00 °C and flash point <30.00 °C. Distribution of n-alkanes (Pr/Ph, and isoprenoide/n-alkanes ratios reflects that the oil samples originated mainly from terrestrial organic sources deposited in an oxic paleoenvironment.

  12. Structure of pre-Caspian depression and major oil and gas fields of the region

    Energy Technology Data Exchange (ETDEWEB)

    Krylov, N.A. (Amoco Production Co., Houston, TX (United States)); Avrov, V.P. (Igirgi, Moscow (USSR)); Lisovsky, N.N.

    1991-03-01

    As a single unified depression, the pre-Caspian basin has been formed from Paleozoic to Cenozoic time. The basin is superimposed on two large pre-Permian depressions. On the Astrakhan-Aktyubinsk zone of uplifts between them is found sharply reduced Carboniferous and Devonian sections. Modern structural plan clearly displays two major structural stages: Subsalt (Paleozoic) and post (post-Kungurian). The post-salt stage is characterized by wide development of salt dome tectonics. It corresponds with its own petroliferous stage containing numerous, mostly small oil accumulations in terrigenous Mesozoic reservoirs. Large recent discoveries-Astrakhan condensate, Karachaganak and Kanazhol-Sinelnikov oil/condensate, Tengiz oil, and other fields-are associated with the Subsalt Paleozoic complex ranging from Lower Permian to the top of Upper Devonian. The Subsalt stage has its own regularities in hydrocarbon phase differentiation; large reserves concentration; dominantly productive carbonates with various reservoirs; and presence of structural, depositional, and erosional factors controlling formation of oil and gas traps. The paper describes major distributional features of the various arc-and-type Permian and Carboniferous formations, which in conjunction with Subsalt paleotemperature data and geochemistry of organic matter represents a basis for the forecast of new discoveries.

  13. Structure and viscosity of a transformer oil-based ferrofluid under an external electric field

    Science.gov (United States)

    Rajnak, M.; Timko, M.; Kopcansky, P.; Paulovicova, K.; Tothova, J.; Kurimsky, J.; Dolnik, B.; Cimbala, R.; Avdeev, M. V.; Petrenko, V. I.; Feoktystov, A.

    2017-06-01

    Various structural changes of ferrofluids have been intensively studied under external magnetic fields. In this work we present an experimental evidence of similar changes induced by an electric field. In the context of the electric field effect on ferrofluids structure, we studied a simple ferrofluid consisting of iron oxide nanoparticles coated with oleic acid and dispersed in transformer oil. The structural changes have been observed both on macroscopic and microscopic scale. We also demonstrate a remarkable impact of the electric field on the ferrofluid viscosity in relation to the reported structural changes. It was found that the electric field induced viscosity changes are analogous to the magnetoviscous effect. These changes and the electroviscous effect are believed to stem from the dielectric permittivity contrast between the iron oxide nanoparticles and transformer oil, giving rise to the effective electric polarization of the nanoparticles. It is highlighted that this electrorheological effect should be considered in studies of ferrofluids for high voltage engineering applications, as it can have impact on the thermomagnetic convection or the dielectric breakdown performance.

  14. Biological treatment process for removing petroleum hydrocarbons from oil field produced waters

    Energy Technology Data Exchange (ETDEWEB)

    Tellez, G.; Khandan, N.

    1995-12-31

    The feasibility of removing petroleum hydrocarbons from oil fields produced waters using biological treatment was evaluated under laboratory and field conditions. Based on previous laboratory studies, a field-scale prototype system was designed and operated over a period of four months. Two different sources of produced waters were tested in this field study under various continuous flow rates ranging from 375 1/D to 1,800 1/D. One source of produced water was an open storage pit; the other, a closed storage tank. The TDS concentrations of these sources exceeded 50,000 mg/l; total n-alkanes exceeded 100 mg/l; total petroleum hydrocarbons exceeded 125 mg/l; and total BTEX exceeded 3 mg/l. Removals of total n-alkanes, total petroleum hydrocarbons, and BTEX remained consistently high over 99%. During these tests, the energy costs averaged $0.20/bbl at 12 bbl/D.

  15. Characteristics of Abnormal Pressure Systems and Their Responses of Fluid in Huatugou Oil Field, Qaidam Basin

    Institute of Scientific and Technical Information of China (English)

    CHEN Xiaozhi; XU Hao; TANG Dazhen; ZHANG Junfeng; HU Xiaolan; TAO Shu; CAI Yidong

    2009-01-01

    Based on the comprehensive study of core samples, well testing data, and reservoir fluid properties, the construction and the distribution of the abnormal pressure systems of the Huatugou oil field in Qaidam Basin are discussed. The correlation between the pressure systems and hydrocarbon accumulation is addressed by analyzing the corresponding fluid characteristics. The results show that the Huatugou oil field as a whole has low formation pressure and low fluid energy; therefore, the hydrocarbons are hard to migrate, which facilitates the forming of primary reservoirs. The study reservoirs, located at the Xiayoushashan Formation (N_2~1) and the Shangganchaigou Formation (N_1) are relatively shallow and have medium porosity and low permeability. They are abnormal low-pressure reservoirs with an average formation pressure coefficient of 0.61 and 0.72 respectively. According to the pressure coefficient and geothermal anomaly, the N_1 and N_2~1 Formations belong to two independent temperature-pressure systems, and the former has slightly higher energy. The low-pressure compartments consist of a distal bar as the main body, prodeita mud as the top boundary, and shore and shallow lake mud or algal mound as the bottom boundary. They are vertically overlapped and horizontally paralleled. The formation water is abundant in the Cl~- ion and can be categorized as CaCl_2 type with high salinity, which indicates that the abnormal low-pressure compartments are in good sealing condition and beneficial for oil and gas accumulation and preservation.

  16. Modified version of the Millikan oil drop experiment to test the probable existence of a new electrodynamic field

    Energy Technology Data Exchange (ETDEWEB)

    Cure, J.C. (Universidad Francisco de Miranda, Coro (Venezuela). Area de Tecnologia)

    1982-10-07

    The probable existence of a new electrodynamic field is obtained by analogy with the general theory of relativity. The new field is derived from a scalar electrodynamic potential which is similar to the Edwards potential discovered experimentally in recent years. A modification of the Millikan oil drop experiment is also suggested to empirically verify the new field avoiding misinterpretations of Edwards' results.

  17. A modified version of the Millikan oil drop experiment to test the probable existence of a new electrodynamic field

    Science.gov (United States)

    Curé, Jorge C.

    1982-10-01

    The probable existence of a new electrodynamic field is obtained by analogy with the general theory of relativity. The new field is derived from a scalar electrodynamic potential which is similar to the Edwards potential discovered experimentally in recent years. A modification of the Millikan oil drop experiment is also suggested to empirically verify the new field avoiding misinterpretations of Edwards' results.

  18. Weathering of field-collected floating and stranded Macondo oils during and shortly after the Deepwater Horizon oil spill.

    Science.gov (United States)

    Stout, Scott A; Payne, James R; Emsbo-Mattingly, Stephen D; Baker, Gregory

    2016-04-15

    Chemical analysis of large populations of floating (n=62) and stranded (n=1174) Macondo oils collected from the northern Gulf of Mexico sea surface and shorelines during or within seven weeks of the end of the Deepwater Horizon oil spill demonstrates the range, rates, and processes affecting surface oil weathering. Oil collected immediately upon reaching the sea surface had already lost most mass below n-C8 from dissolution of soluble aliphatics, monoaromatics, and naphthalenes during the oil's ascent with further reductions extending up to n-C13 due to the onset of evaporation. With additional time, weathering of the floating and stranded oils advanced with total PAH (TPAH50) depletions averaging 69±23% for floating oils and 94±3% for stranded oils caused by the combined effects of evaporation, dissolution, and photo-oxidation, the latter of which also reduced triaromatic steroid biomarkers. Biodegradation was not evident among the coalesced floating oils studied, but had commenced in some stranded oils.

  19. Preliminary study on the application of an electric field as a method of preservation for virgin olive oil

    Directory of Open Access Journals (Sweden)

    José Alberto Ariza-Ortega

    2016-06-01

    Full Text Available The objective of this study was to analyze the effect of an electric field treatment (voltage: 3 kV cm-1, frequency: 60 Hz and time: of 5 and 25 min on the stability of unsaturated fatty acids in virgin olive oil. Unsaturated fatty acid oxidation in the virgin olive oil was analyzed by Fourier transform infrared spectroscopy in the mid infrared region, and by quality parameters (acidity, peroxide and iodine. The electric field is a suitable method to preserve this oil composition with minimal modifications without the synthetic antioxidant addition.

  20. Case History of 3D Seismic Survey in Aershan Oil Field

    Institute of Scientific and Technical Information of China (English)

    Lu Yousheng

    1996-01-01

    @@ Aershan Oil Field is located at the eastern end of the Manite depression .in the northeastern part of Erlian basin of North China (Fig. 1). Three oilfields -Anan, Abei and Hanan - were discovered in the Erlian basin in the early 1980s using 2D seismic survey with a very dense 0.5 km ×0.5 km grid. However. difficulties were encountered in structural delineation and lateral reservoir prediction.partly due to low signal to noise ratio and resolution of 2D section, partly due to extensive lateral variations. In order to solve these problems, large- area 3D seismic survey was conducted in the late 1980s. 3D survey area is 80 km2.This survey accurately identified the details of reservoir structures, as well as located low-relief structures. Good results were also obtained in predicting lateral reservoir variations and ascertaining oil/water contacts and oilbearing areas.

  1. CNPC Beefs up Cooperative Development for Onshore Oil and Gas Fields

    Institute of Scientific and Technical Information of China (English)

    Cui Yaonan; Wang Kefu

    1996-01-01

    @@ China National Petroleum Corporation (CNPC) has made remarkable progress in cooperation with foreign firms for joint develoment of China's onshore oil and gas fields. A total of more than 30blocks from China's nine oil areas such as Daqing, Shengli,Liaohe, Xinjiang, Dagang, Zhongyuan, Tairm, Sichuan and Qinghai are now put up for cooperative development with foreign firms in various forms. By the end of August 1996, CNPC has signed eight development contracts with foreign firms, of which four contracts are for development of proven non-producing reserves (namely: Contract for Block Min-114 and Contract for Block Qian-130 in Jilin,Contract for Block Zhao-13 in Daqing, and Contract for West Chengdao Development in Shengli); one contract is for EOR ( contract for heavy crude in Xinjiang ) and three contracts are for well workover service and productionsharing ( in Shengli, Liaohe and Dagang ).

  2. Modeling porous structure of oil-pressboard interface and its effect on electric field distribution

    Institute of Scientific and Technical Information of China (English)

    司马文霞; 姜赤龙; 毛文奇; 唐信

    2015-01-01

    The oil−pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil−pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.

  3. Integral anomalous effect of an oil and gas deposit in a seismic wave field

    Energy Technology Data Exchange (ETDEWEB)

    Korostyshevskiy, M.B.; Nabokov, G.N.

    1981-01-01

    The basic precepts of an elaborated version of a procedure for forecasting (direct exploration) of oil and gas deposits according to seismic prospecting data MOV are examined. This procedure was previously called the procedure of analysis of the integral affect of an oil and gas deposit in a seismic wave field (MIIEZ-VP). The procedure is implemented in the form of an automated system ASOM-VP for the BESM-4 computer in a standard configuration equipped with standard input-output devices for seismic information (''Potok'', MVU, ''Atlas''). The entire procedure of processing from input of data into the computer to output of resulting maps and graphs on graph plotter ''Atlas'' is automated. Results of testing of procedure MIIEZ-VP and system ASOM-VP on drilled areas of Kazakhstan, Azerbaydzhan and Uzbekistan are cited.

  4. Horizontal drilling pilot in a shallow heavy oil reservoir in the Suplac Field in Northwestern Romania

    Energy Technology Data Exchange (ETDEWEB)

    Lavelle, J.; Yaghoobi, A. [OMV Petrom S.A. (Romania)

    2011-07-01

    The Suplac field situated in north-western Romania is a shallow and heavy oil deposit lying at depths of between 40 and 200 meters. The deposit has been exploited since 1964 using different techniques but some areas of the reservoir located beneath villages and steep hills were never reached. The aim of this paper is to describe a project using horizontal alternating steam drive (HASD) to harvest oil from these areas by turning from vertical to horizontal. A pilot test was conducted over 4 months in 2010 with 3 parallel horizontal wells. The rig equipment, the well path designs and the directional difficulties are discussed herein. Results showed that horizontals could be drilled using a vertical mast rig and all the expectations were met. The success of this pilot project was highlighted herein and the company is now planning on continuing with a horizontal development program; however wellbore clean out is a remaining challenge.

  5. Corrosion Behavior of Carbon Steel in Synthetically Produced Oil Field Seawater

    Directory of Open Access Journals (Sweden)

    Subir Paul

    2014-01-01

    Full Text Available The life of offshore steel structure in the oil production units is decided by the huge corrosive degradation due to SO42-, S2−, and Cl−, which normally present in the oil field seawater. Variation in pH and temperature further adds to the rate of degradation on steel. Corrosion behavior of mild steel is investigated through polarization, EIS, XRD, and optical and SEM microscopy. The effect of all 3 species is huge material degradation with FeSx and FeCl3 and their complex as corrosion products. EIS data match the model of Randle circuit with Warburg resistance. Addition of more corrosion species decreases impedance and increases capacitance values of the Randle circuit at the interface. The attack is found to be at the grain boundary as well as grain body with very prominent sulphide corrosion crack.

  6. Reservoir engineering optimized techniques and applications research in initial development stage of a super shallow sea marginal oil field : Development case of Chengdao Oil Field in Bohai Bay, China

    Energy Technology Data Exchange (ETDEWEB)

    Yu, D.; Ren, Y.; Zhou, Y.; Wang, D. [Shengli Oil field Inc. (China). SINOPEC Corp.

    2002-06-01

    One of the greatest Chinese neritic marginal oil fields is the Chengdao oil field, located north of Dongying City, Shandong Province, China in the southern part of Bohai Bay. The depth of the seawater is less than 15 metres, even though the field lies 5 kilometres from shore. It falls in the category of super shallow sea marginal oil field, due to a number of reasons: peculiar geographical location, abominable environment and climate, complex reservoir characteristics and high economic risk of exploration and development. The major oil-bearing series of the Chengdao oil field is upper Guantao sandstones. The establishment of a three-dimensional conceptual model and static model in initial development stage were completed using Log-Constrained Seismic Inversion technique combined with three-dimensional visual geological model establishment technique. The optimization and determination of reservoir engineering technical limits, namely development scheme, well pattern and spacing, timing of water injection, water injection scheme and injection-to-production ratio was accomplished with the application of geostatistics, numerical simulation and economic evaluation techniques. For the period 1996-2001, the cumulative oil productivity of upper Guantao reservoir in pure natural energy development increased substantially. The results were presented in this paper. 3 refs., 6 tabs., 13 figs.

  7. Mercury concentrations in urine of amerindian populations near oil fields in the peruvian and ecuadorian amazon.

    Science.gov (United States)

    Webb, Jena; Coomes, Oliver T; Ross, Nancy; Mergler, Donna

    2016-11-01

    Mercury is a global contaminant with toxic, persistent effects on human health. Petroleum extraction is an important source of elemental mercury; little is known about human exposure levels near oil fields in the Amazon basin. To characterize mercury levels in people living near oil production sites in the Peruvian and Ecuadorian Amazon, controlling for fish consumption, occupation, source of water and socio-demographic characteristics. Analyze mercury levels in urine samples using cold vapour atomic fluorescence spectrometry from 76 indigenous men and women in eight riverine communities situated near oil wells or pipelines. Subjects answered a questionnaire soliciting socio-demographic, occupational and dietary information. Data were analyzed using multiple linear regression modeling. The mean value of U-Hg was 2.61μg/g creatinine (95% CI: 2.14-3.08), with 7% of the sample recording values above the global background standard suggested by The World Health Organization (5μg/g creatinine). Women who used water from a surface source had two and a half times the amount of mercury in their urine (mean=3.70μg/g creatinine, 95% CI: 2.26-5.15) compared with women who used other water sources (mean =1.39μg/g creatinine, 95% CI: 0.51-2.25). Men who were involved in an oil clean-up operation had twice as much mercury in their urine (mean =3.07μg/g creatinine, 95% CI: 1.97-4.16) as did those who worked on other tasks (mean =1.56μg/g creatinine, 95% CI: 1.48-2.65). Mercury levels were not associated with the number of fish meals per week. Indigenous peoples of the Peruvian and Ecuadorian Amazon living near oil production sites generally had urine mercury levels within the global background standard suggested by the World Health Organization. Increased levels of mercury in urine were detected for men involved in oil spill remediation and for women who relied on surface water for household needs. These findings signal the need for strict safety measures to limit the amount

  8. Spatial statistical analysis of basal stem root disease under natural field epidemic of oil palm

    Science.gov (United States)

    Kamu, Assis; Phin, Chong Khim; Seman, Idris Abu; Wan, Hoong Hak; Mun, Ho Chong

    2015-02-01

    Oil palm or scientifically known as Elaeis guineensis Jacq. is the most important commodity crop in Malaysia and has greatly contributed to the economy growth of the country. As far as disease is concerned in the industry, Basal Stem Rot (BSR) caused by Ganoderma boninence remains the most important disease. BSR disease is the most widely studied with information available for oil palm disease in Malaysia. However, there is still limited study on the spatial as well as temporal pattern or distribution of the disease especially under natural field epidemic condition in oil palm plantation. The objective of this study is to spatially identify the pattern of BSR disease under natural field epidemic using two geospatial analytical techniques, which are quadrat analysis for the first order properties of partial pattern analysis and nearest-neighbor analysis (NNA) for the second order properties of partial pattern analysis. Two study sites were selected with different age of tree. Both sites are located in Tawau, Sabah and managed by the same company. The results showed that at least one of the point pattern analysis used which is NNA (i.e. the second order properties of partial pattern analysis) has confirmed the disease is complete spatial randomness. This suggests the spread of the disease is not from tree to tree and the age of palm does not play a significance role in determining the spatial pattern of the disease. From the spatial pattern of the disease, it would help in the disease management program and for the industry in the future. The statistical modelling is expected to help in identifying the right model to estimate the yield loss of oil palm due to BSR disease in the future.

  9. Chemical comparison and acute toxicity of water accommodated fraction (WAF) of source and field collected Macondo oils from the Deepwater Horizon spill.

    Science.gov (United States)

    Faksness, Liv-Guri; Altin, Dag; Nordtug, Trond; Daling, Per S; Hansen, Bjørn Henrik

    2015-02-15

    Two Source oils and five field collected oil residues from the Deepwater Horizon incident were chemically characterized. Water accommodated fractions (WAFs) of the Source oils and two of the field-weathered oils were prepared to evaluate the impact of natural weathering on the chemical composition and the acute toxicity of the WAFs. Toxicity test species representing different tropic levels were used (the primary producer Skeletonema costatum (algae) and the herbivorous copepod Acartia tonsa). The results suggest that the potential for acute toxicity is higher in WAFs from non-weathered oils than WAFs from the field weathered oils. The Source oils contained a large fraction of soluble and bioavailable components (such as BTEX (benzene, toluene, ethyl benzene, xylenes) and naphthalene), whereas in the surface collected oils these components were depleted by dissolution into the water column as the oil rose to the surface and by evaporative loss after reaching the sea surface.

  10. Geology and habitat of oil in Ras Budran field, Gulf of Suez, Egypt

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhary, L.R.; Taha, S.

    1987-05-01

    Deminex discovered the Ras Budran oil field in 1978. Discovery well EE 85-1 was drilled in about 140 ft of water, 4 km off the Sinai coast of the Gulf of Suez. Appraisal drilling (EE 85-2, 3, and 4 wells) confirmed the presence of a major field with an estimated 700 million bbl oil in place. The field, developed from three wellhead platforms, went on production in April 1983. To date, 20 development wells have been drilled. The Ras Budran structure at the deepest mappable seismic reflector, top Kareem (middle Miocene), is a broad northeast-southwest-trending anticlinal feature striking nearly at right angles to the main Gulf of Suez trend. At pre-Miocene producing horizons, the structure is complex and consists of a northeast-dipping flank (14-15) broken into several blocks by faults and limited to the south and west by major bounding faults. Oil is produced from three units of Nubian sandstone at a depth of 11,000 to 12,000 ft. The lower unit of Paleozoic age averages 10% porosity and up to 200 md in -situ permeability. The wells completed in this unit produce up to 2000 BOPD. In contrast, the sands of the upper two units of Lower Cretaceous age have a 15-20% porosity and up to 700 md permeability. The wells completed in these units produce 6000-8000 BOPD. The Ras Budran structure was primarily formed during the intra-Rudeis tectonic phase (lower Miocene). Migration of oil for accumulation in Ras Budran started late in the upper Miocene or Pliocene when the Santonian Brown Limestone and the Eocene Thebes Formation, the main source beds in the Gulf, reached the threshold of oil generation at a burial depth of about 10,000 ft (3000 m). At these depths, the organic matter in the source beds have a transformation ratio (0.10 to 0.15), increased yields of C15 + soluble organic matter and C15 + saturated hydrocarbons, a vitrinite reflectance of 0.62%, and a TTI value of 15.

  11. Detailed Study of Seismic Wave Attenuation in Carbonate Rocks: Application on Abu Dhabi Oil Fields

    Science.gov (United States)

    Bouchaala, F.; Ali, M. Y.; Matsushima, J.

    2015-12-01

    Seismic wave attenuation is a promising attribute for the petroleum exploration, thanks to its high sensitivity to physical properties of subsurface. It can be used to enhance the seismic imaging and improve the geophysical interpretation which is crucial for reservoir characterization. However getting an accurate attenuation profile is not an easy task, this is due to complex mechanism of this parameter, although that many studies were carried out to understand it. The degree of difficulty increases for the media composed of carbonate rocks, known to be highly heterogeneous and with complex lithology. That is why few attenuation studies were done successfully in carbonate rocks. The main objectives of this study are, Getting an accurate and high resolution attenuation profiles from several oil fields. The resolution is very important target for us, because many reservoirs in Abu Dhabi oil fields are tight.Separation between different modes of wave attenuation (scattering and intrinsic attenuations).Correlation between the attenuation profiles and other logs (Porosity, resistivity, oil saturation…), in order to establish a relationship which can be used to detect the reservoir properties from the attenuation profiles.Comparison of attenuation estimated from VSP and sonic waveforms. Provide spatial distribution of attenuation in Abu Dhabi oil fields.To reach these objectives we implemented a robust processing flow and new methodology to estimate the attenuation from the downgoing waves of the compressional VSP data and waveforms acquired from several wells drilled in Abu Dhabi. The subsurface geology of this area is primarily composed of carbonate rocks and it is known to be highly fractured which complicates more the situation, then we separated successfully the intrinsic attenuation from the scattering. The results show that the scattering is significant and cannot be ignored. We found also a very interesting correlation between the attenuation profiles and the

  12. Disposal of NORM-contaminated oil field wastes in salt caverns -- Legality, technical feasibility, economics, and risk

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J.A.; Smith, K.P.; Tomasko, D.; Elcock, D.; Blunt, D.; Williams, G.P.

    1998-07-01

    Some types of oil and gas production and processing wastes contain naturally occurring radioactive materials (NORM). If NORM is present at concentrations above regulatory levels in oil field waste, the waste requires special disposal practices. The existing disposal options for wastes containing NORM are limited and costly. This paper evaluates the legality, technical feasibility, economics, and human health risk of disposing of NORM-contaminated oil field wastes in salt caverns. Cavern disposal of NORM waste is technically feasible and poses a very low human health risk. From a legal perspective, there are no fatal flaws that would prevent a state regulatory agency from approaching cavern disposal of NORM. On the basis of the costs charged by caverns currently used for disposal of nonhazardous oil field waste (NOW), NORM waste disposal caverns could be cost competitive with existing NORM waste disposal methods when regulatory agencies approve the practice.

  13. ELECTRORHEOLOGICAL PROPERTIES OF TALC POWDER/SILICONE OIL SUSPENSIONS UNDER DC FIELDS

    Institute of Scientific and Technical Information of China (English)

    Hasim Yilmaza; Ummihan Yilmazb

    2007-01-01

    In this study, the electrorheological (ER) behavior of suspensions prepared from d50 = 2.4 μm talc powder,dispersed in insulating silicone oil (SO) medium was investigated. Sedimentation stabilities of suspensions (c = 5 wt%)prepared using these talc powder powders were determined to be 78 days. The ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. The shear stress of talc powder suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and showed a typical shear thinning non-Newtonian visco-elastic behavior. Effects of frequency on the ER activity of talc powder/SO system were also investigated.

  14. ELECTRORHEOLOGICAL PROPERTIES OF DIATOMITE/SILICONE OIL SUSPENSIONS UNDER DC FIELDS

    Institute of Scientific and Technical Information of China (English)

    Hasim Yilmaz

    2006-01-01

    In this study, electrorheological (ER) behavior of suspensions prepared from 3.0 and 9.0 μm diatomite particulate,dispersed in insulating silicone oil (SO) medium was investigated. Sedimentation stabilities of suspensions (c = 5 wt%)prepared using these diatomite powders were determined to be 32 days (d = 3 μm) and 24 days (d = 9 μm), respectively. ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. Shear stress of diatomite suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and particle size, showing a typical shear thinning non-Newtonian visco-elastic behavior. Effects of high temperature and polar promoter onto ER activity of diatomite/SO system were also investigated.

  15. Local and Global Impacts of Carbon Capture and Storage Combined with Enhanced Oil Recovery in Four Depleted Oil Fields, Kern County, California

    Science.gov (United States)

    Gillespie, J.; Jordan, P. D.; Goodell, J. A.; Harrington, K.; Jameson, S.

    2015-12-01

    Depleted oil reservoirs are attractive targets for geologic carbon storage (GCS) because they possess proven trapping mechanisms and large amounts of data pertaining to production and reservoir geometry. In addition, CO2 enhanced oil recovery (EOR) can improve recovery of the remaining oil at recovery factors of 6 to 20% of original oil in place in appropriate reservoirs. CO2 EOR increases the attractiveness of depleted oil and gas reservoirs as a starting point for CCS because the CO2 becomes a commodity that can be purchased by field operators for EOR purposes thereby offsetting the costs of CO2 capture at the power plant. In California, Kern County contains the largest oil reservoirs and produces 76% of California's oil. Most of the production at depths suitable for CCS combined with CO2 EOR comes from three reservoirs: the Vedder and Temblor formations and the Stevens Sandstone of the Monterey Formation. These formations were evaluated for GCS and CO2 EOR potential at the North and South Coles Levee (Stevens Sandstone), Greeley (Vedder) and McKittrick (Temblor) fields. CO2 EOR could be expected to produce an additional 150 million bbls of oil. The total storage space created by pre- and post-EOR fluid production for all three reservoirs is approximately 104 million metric tons (MMT). Large fixed sources in California produce 156 MMT/yr of CO2, and sources in Kern County produce 26 MMT/yr (WESTCARB, 2012). Therefore, the fields could store about four years of local large fixed source emissions and about two thirds of statewide emissions. However, from a global perspective, burning the additional oil produced by CO2 EOR would generate an additional 65 MMT of CO2 if not captured. This would result in a net reduction of greenhouse gas of only 39 MMT rather than the full 104 MMT. If the water produced along with the oil recovered during CO2 EOR operations is not reinjected into the reservoir, the storage space could be much higher.

  16. Assessment of Alaska's North Slope Oil Field Capacity to Sequester CO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Umekwe, Pascal, E-mail: wpascals@gmail.com [Baker Hughes (United States); Mongrain, Joanna, E-mail: Joanna.Mongrain@shell.com [Shell International Exploration and Production Co (United States); Ahmadi, Mohabbat, E-mail: mahmadi@alaska.edu [University of Alaska Fairbanks, Petroleum Engineering Department (United States); Hanks, Catherine, E-mail: chanks@gi.alaska.edu [University of Alaska Fairbanks, Geophysical Institute (United States)

    2013-03-15

    The capacity of 21 major fields containing more than 95% of the North Slope of Alaska's oil were investigated for CO{sub 2} storage by injecting CO{sub 2} as an enhanced oil recovery (EOR) agent. These fields meet the criteria for the application of miscible and immiscible CO{sub 2}-EOR methods and contain about 40 billion barrels of oil after primary and secondary recovery. Volumetric calculations from this study indicate that these fields have a static storage capacity of 3 billion metric tons of CO{sub 2}, assuming 100% oil recovery, re-pressurizing the fields to pre-fracturing pressure and applying a 50% capacity reduction to compensate for heterogeneity and for water invasion from the underlying aquifer. A ranking produced from this study, mainly controlled by field size and fracture gradient, identifies Prudhoe, Kuparuk, and West Sak as possessing the largest storage capacities under a 20% safety factor on pressures applied during storage to avoid over-pressurization, fracturing, and gas leakage. Simulation studies were conducted using CO{sub 2} Prophet to determine the amount of oil technically recoverable and CO{sub 2} gas storage possible during this process. Fields were categorized as miscible, partially miscible, and immiscible based on the miscibility of CO{sub 2} with their oil. Seven sample fields were selected across these categories for simulation studies comparing pure CO{sub 2} and water-alternating-gas injection. Results showed that the top two fields in each category for recovery and CO{sub 2} storage were Alpine and Point McIntyre (miscible), Prudhoe and Kuparuk (partially miscible), and West Sak and Lisburne (immiscible). The study concludes that 5 billion metric tons of CO{sub 2} can be stored while recovering 14.2 billion barrels of the remaining oil.

  17. Metal PCP field trial pushes up pumping window for heavy oil hot production : Joslyn field case

    Energy Technology Data Exchange (ETDEWEB)

    Beauquin, J.L.; Ndinemenu, F. [Total SA, Paris (France); Chalier, G. [Total E and P Canada Ltd., Calgary, AB (Canada); Lemay, L.; Seince, L. [PCM, Verves (France); Jahn, S. [Kudu Industries Inc., Calgary, AB (Canada)

    2008-07-01

    This paper presented details of field trials conducted for a novel all-metal progressive cavity pump (PCP) system at a steam assisted gravity drainage (SAGD) facility in Canada's Joslyn field. The fully metallic helical profile was produced by hydro-forming processes. The pump's stator was comprised of 3 elements welded together and coated for high temperature and wear resistance. During the field trials, the well pads were equipped with metal PCPs as well as topside and down hole instrumentation in order to obtain real time well data and pump performance data. Results of the study showed that initial volumetric efficiencies were 55 per cent. When pressure communication between injector and producer wells increased, pump intake pressure and speed also increased. Performance data from the field trial were then compared with results from high temperature electric submersible pumps (ESPs). It was concluded that the metal PCP is a promising artificial lift technology for SAGD processes. The pump design is now being modified to minimize vibrations and improve run life. 1 ref., 11 figs.

  18. Development Strategies for Achieving High Production with Fewer Wells in Conventional Offshore Heavy Oil Fields in Bohai Bay, China

    Institute of Scientific and Technical Information of China (English)

    Fu Xiang; Li Xiangfang; Kang Xiaodong

    2006-01-01

    Development strategy for heavy-oil reservoirs is one of the important research interests in China National Offshore Oil Corp. (CNOOC) that plans a highly effective development for heavy oil fields in multilayered fluvial reservoirs because of their significant influence on marine oil and even on China's petroleum production. The characteristics analysis of multilayered fluvial reservoirs in the heavy oil fields in Bohai Bay indicates that large amounts of oil were trapped in the channel, point bar and channel bar sands. The reserves distribution of 8 oilfields illustrates that the reserves trapped in the main sands, which is 20%-40% of all of the sand bodies, account for 70%-90% of total reserves of the heavy oil fields. The cumulative production from high productivity wells (50% of the total wells) was 75%-90% of the production of the overall oilfield, while only 3%-10% of the total production was from the low productivity wells (30% of the total wells). And the high productivity wells were drilled in the sands with high reserves abundance. Based on the above information the development strategy was proposed, which includes reserves production planning, selection of well configuration, productivity design, and development modification at different stages.

  19. Playa Del Rey oil field, Los Angeles County, California-- natural gas storage

    Energy Technology Data Exchange (ETDEWEB)

    Barnds, R.M.

    1968-01-01

    The Playa del Rey oil field is on Santa Monica Bay, about 15 miles SW. of Los Angeles. The sedimentary rocks of the field were deposited on the flanks and over the ridge of an erosional surface of Franciscan schist. A NW.-trending anticline resulted from deposition and compaction over the ridge. An apron of schistose clastic material was deposited in the littoral zone at the base of the ridge and in embayments formed by the lateral channels. Conformably overlying the basal conglomerate (productive lower zone) and unconformably overlying the schist is a dark brown, compact shale with abundant small lenticular streaks and nodules of calcium phosphate. The rest of the Miocene rock column is composed of about 500 ft of hard, compact black shale and sandy shale, which is conformably overlain by the typical Los Angeles-basin Pliocene and Pleistocene rocks. The upper oil zone is in the lower Pliocene. The Playa del Rey Field is productive from both the lower zone and from sedimentary rocks of the anticline. There are widely varied porosity and permeability values throughout the Del Rey Hills area. That part chosen for the gas-storage project is where the basal conglomerate overlying the Franciscan schist is overlain by the nodular shale.

  20. Application of new geological modeling technology in secondary development in Daqing oil field

    Science.gov (United States)

    Li, C. L.; Zhang, J. H.; Li, H. K.; Liu, C.

    2016-08-01

    The reconfiguration on underground geology system is one of the key techniques for secondary development in Daqing oil field. The geological modeling is the unique method to characterize new knowledge system of reservoir. The development history of maturing field is long. The structure of maturing field is complex and the distribution of oil remaining is highly scattered. The difficulty of adjustment and potential tapping is great. In viewing of demand for secondary development, the strategies and methods of geological modeling are proposed. According to the characteristics that many faults crosscut each other, the clue of fractional simulation—key horizon controlling—overall structural modeling is carried out to accurately and effectively build fine structural models. In order to approximate the real microfacies simulation effect, microfacies modeling technology of multiple iterations and geology tendency under vertical and lateral geology tendency constraint is used. And the attribute models could approximate the real parametric distribution. Moreover, in viewing of the key and potential reservoir sand, the countermeasure on configuration modeling by different stochastic simulation methods and step simulation is proposed to rapidly build geologic models. The geologic models are scientific and feasible. The above-mentioned countermeasures and methods have been used in secondary development of Daqing oilfield and the effect was well. This new technology presents directive sense.

  1. Enhanced biodegradation of transformer oil in soils with cyclodextrin--from the laboratory to the field.

    Science.gov (United States)

    Molnár, Mónika; Leitgib, Laura; Gruiz, Katalin; Fenyvesi, Eva; Szaniszló, Nikoletta; Szejtli, József; Fava, Fabio

    2005-03-01

    The use cyclodextrins for the intensification of bioremediation by improving the mobility and bioavailability of contaminants has recently been studied. In this work, the role of randomly methylated beta-cyclodextrin in the bioremediation of soils contaminated with transformer oil was studied both in bench scale bioreactors and through field experiments. The aims of this research were to (a) establish the scientific background of a cyclodextrin-based soil bioremediation technology, (b) demonstrate its feasibility and effectiveness in the field, and (c) develop an integrated methodology, consisting of a combination of physical, chemical, biological and ecotoxicological analytical methods, for efficiently monitoring the technology performances. The stepwise increasing scale of the experiments and the application of the integrated analytical methodology supported the development of a scientifically established new technology and the identification of the advantages and the limitations of its application in the field. At each phase of the study, randomly methylated beta-cyclodextrin was found to significantly enhance the bioremediation and detoxification of the transformer oil-contaminated soils employed by increasing the bioavailability of the pollutants and the activity of indigenous microorganisms.

  2. Gas injection may have triggered earthquakes in the Cogdell oil field, Texas.

    Science.gov (United States)

    Gan, Wei; Frohlich, Cliff

    2013-11-19

    Between 1957 and 1982, water flooding was conducted to improve petroleum production in the Cogdell oil field north of Snyder, TX, and a contemporary analysis concluded this induced earthquakes that occurred between 1975 and 1982. The National Earthquake Information Center detected no further activity between 1983 and 2005, but between 2006 and 2011 reported 18 earthquakes having magnitudes 3 and greater. To investigate these earthquakes, we analyzed data recorded by six temporary seismograph stations deployed by the USArray program, and identified 93 well-recorded earthquakes occurring between March 2009 and December 2010. Relocation with a double-difference method shows that most earthquakes occurred within several northeast-southwest-trending linear clusters, with trends corresponding to nodal planes of regional focal mechanisms, possibly indicating the presence of previously unidentified faults. We have evaluated data concerning injection and extraction of oil, water, and gas in the Cogdell field. Water injection cannot explain the 2006-2011 earthquakes, especially as net volumes (injection minus extraction) are significantly less than in the 1957-1982 period. However, since 2004 significant volumes of gases including supercritical CO2 have been injected into the Cogdell field. The timing of gas injection suggests it may have contributed to triggering the recent seismic activity. If so, this represents an instance where gas injection has triggered earthquakes having magnitudes 3 and larger. Further modeling studies may help evaluate recent assertions suggesting significant risks accompany large-scale carbon capture and storage as a strategy for managing climate change.

  3. The boomerang area: An example of oil and gas fields related to a transfer zone development

    Energy Technology Data Exchange (ETDEWEB)

    Specht, M.; Colletta, B.; Letouzey, J. (Institut Francais de petrole, Ruiel-Malmaison (France)); Baby, P. (ORSTOM, Santa Cruz (Bolivia)); Oller, J.; Montemuro, G. (YPFB, Santa Cruz (Bolivia)); Guillier, B. (IFEA, Santa Cruz (Bolivia))

    1993-02-01

    We present results of a study realized from petroleum data of Yacimientos Petroliferos Fiscales Bolivianos of the most important transfer zone of the Bolivian Andean belt: the Santa Cruz transfer zone. Frontal part of the Bolivian Andean belt consists of a thick series (6 to 8 km) of paleozoic to cenozoic sedimentary rocks thrusted eastwards on a sole thrust located in paleozoic series. The frontal part of the belt, globally N-S oriented, undergoes an important deviation East of Santa Cruz with a left lateral offset of 100 Km. Taking into account the E-W shortening direction, this transfer zone can be interpreted as a lateral ramp. The Santa Cruz transfer zone coincide with a set of small oil and gas fields whereas frontal structures lack hydrocarbon occurrences. We are then faced with a two-fold problem: (1) what is the origin of the transfer zone (2) why are the oil and gas concentrated in the transfer zone Our synthesis shows that the transfer zone is superimposed on the limit of a detached Paleozoic basin whose border direction is oblique to the regional shortening direction. We then interpret the oil and gas formation in two steps: (1) source rock maturation and hydrocarbon migration towards the top of the Paleozoic sedimentary wedge before Andean deformation. (2) hydrocarbon dismigration towards anticlinal structures developed during the lateral ramp propagation. In order to test our interpretation we performed a set of analog model experiments whose 3D visualization was analyzed by computerized X-ray tomography.

  4. Integration of geological, geochemical, and geophysical spatial data of the Cement oil field, Oklahoma, test site

    Science.gov (United States)

    Termain, Patricia A.; Donovan, Terrence J.; Chavez, Pat S.; Barringer, Anthony R.

    1980-01-01

    Measurement pertaining to geology, geochemistry, and geophysics of the Cement oil field, Oklahoma, test site were collected employing both airborne sensors and ground-based data collection. The measurements include: (1) airborne gamma-ray spectrometry (supplying bismuth 214, thalium 208, and potassium 40 gamma-ray intensities); (2) aeromagnetic survey data; (3) multi-frequency airborne resistivity survey data (supplying apparent electrical resistivity of near surface materials); (4) gravity data; (5) geological and topographic maps; and (6) image data from Landsat MSS and U-2 photography.

  5. Investigation of ginkgo biloba leave extracts as corrosion and Oil field microorganism inhibitors.

    Science.gov (United States)

    Chen, Gang; Zhang, Min; Zhao, Jingrui; Zhou, Rui; Meng, Zuchao; Zhang, Jie

    2013-05-07

    Ginkgo biloba (Ginkgoaceae), originating from China, now distributes all over the world. Wide application of Ginkgo biloba extracts is determined by the main active substances, flavonoids and terpenoids, which indicates its extracts suitable to be used as an effective corrosion inhibitor. The extracts of Ginkgo biloba leave have been investigated on the corrosion inhibition of Q235A steel with weight loss and potentiodynamic polarisation techniques. The inhibition efficiency of the extracts varies with extract concentration. The extracts inhibit corrosion mainly by adsorption mechanism. Potentiodynamic polarisation studies show that extracts are mixed type inhibitors. The antibacterial activity of the extracts against oil field microorganism (SRB, IB and TGB) was also investigated.

  6. Standard practice for evaluating and qualifying oil field and refinery corrosion inhibitors using rotating cage

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This practice covers a generally accepted procedure to use the rotating cage (RC) for evaluating corrosion inhibitors for oil field and refinery applications. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  7. Exposures and cancer incidence near oil fields in the Amazon basin of Ecuador

    OpenAIRE

    San, S.; Armstrong, B; Cordoba, J.; Stephens, C.

    2001-01-01

    OBJECTIVES—To examine environmental exposure and incidence and mortality of cancer in the village of San Carlos surrounded by oil fields in the Amazon basin of Ecuador.
METHODS—Water samples of the local streams were analyzed for total petroleum hydrocarbons (TPHs). A preliminary list of potential cancer cases from 1989 to 1998 was prepared. Cases were compared with expected numbers of cancer morbidity and mortality registrations from a Quito reference population.
RESULTS—Water analysis showe...

  8. Numerical simulation and experimental verification of silicone oil flow over magnetic fluid under applied magnetic field

    Institute of Scientific and Technical Information of China (English)

    Ruoyu Hong; Zhiqiang Ren; Shizhong Zhang; Jianmin Ding; Hongzhong Li

    2007-01-01

    Two-layer flow of magnetic fluid and non-magnetic silicone oil was simulated numerically. The continuity equation, momentum equations,kinematic equation, and magnetic potential equation were solved in two-dimensional Cartesian coordinate. PLIC (piecewise linear integration calculation) VOF (volume of fluid) scheme was employed to track the free interface. Surface tension was treated via a continuous surface force(CSF) model that ensures robustness and accuracy. The influences of applied magnetic field, inlet velocity profile, initial surface disturbance of interface and surface tension were analyzed. The computed interface shapes at different conditions were compared with experimental observation.

  9. Aplication of AVO Technique to Gas Exploration in Liaohe Oil Field

    Institute of Scientific and Technical Information of China (English)

    Yu Changqing; Zhou Faping

    1996-01-01

    @@ Introduction AVO (Amplitude Versus Offset) technique uses prestack seismic data to predict reservoirs and detect hydrocarbon. We used AVO to find gas for the first time in Liaohe Oil Fields. Both real and synthetic data show that the typical AVO characteristics of gas reservoirs in Liaohe Basin appears dominantly as dim spots and occasionally bright spots. But the bright spot reservoirs are only restricted at depths less than 1 000 m These features can function as detection criteria for the application of AVO to gas exploration in Damintun Depression. which have been proved by real data to be right and reliable.

  10. Feasibility study of enhanced oil recovery for fields in decline. Export trade information (Final)

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    The report, generated by Scientific Software-Intercomp, Inc. for Yacimientos Petroliferos Fiscales Bolivianos, documents the results of a feasibility study which addressed the viability of developing petroleum areas in Bolivia. The primary objective of the project was to describe the reservoirs that have been discovered and their reserves, describe which would be the best alternatives for development of these reservoirs, and to determine the best alternatives for development of all the reserves together. The report, volume 4 of 4, concerns the feasibility of enhancing the oil or condensate recovery from a chosen group of fields (Yapacani, Humberto Suarez Roca, Vibora, La Pena, San Roque, and Camiri).

  11. Organic geochemistry of heavy/extra heavy oils from sidewall cores, Lower Lagunillas Member, Tia Juana Field, Maracaibo Basin, Venenzuela

    Energy Technology Data Exchange (ETDEWEB)

    Tocco, R.; Alberdi, M. [PDVSA-Inteveo S.A., Caracas (Venezuela)

    2002-10-01

    The study of 22 oils from sidewall cores taken at different depths in the Lower Lagunillas Member, well LSJ-AB, Tia Juana Field, Maracaibo Lake is presented, with the purpose of predicting the intervals that present the best crude oil quality. Differences were detected in the biodegradation levels of the studied samples, which are correlated with the depth at which the sidewall core was taken. The API gravity was considered for the oils from each sidewall core and it was found that toward the top of the sequence, the oils have an API gravity of 10.6-11.2{sup o}C, while toward the base part of the sequence, the well produces extra heavy oils with an API gravity that varies between 8.2 and 8.7{sup o}. 12 refs., 5 figs., 1 tab.

  12. Organic geochemical study of the ''W'' oil-gas field in the Yugoslav part of the Pannonian basin

    Energy Technology Data Exchange (ETDEWEB)

    Saban, M.M. (Belgrade Univ. (Yugoslavia). Faculty of Chemistry Institute of Chemistry, Technology and Metallurgy, Belgrade (Yugoslavia)); Jovancicevic, B.S.; Glumicic, T. (Institute of Chemistry, Technology and Metallurgy, Belgrade (Yugoslavia)); Saracevic, S. (Nafta-gas, Novi Sad (Yugoslavia))

    1990-01-01

    The naphthenic crude oil from the ''W'' oil-gas field differs from almost all other, paraffinic base oils discovered until now in the Yugoslav part of the Pannonian basin. In order to explain this difference, some geological and organic geochemical investigations were carried out. On the basis of the bulk and biomarker parameters, determined in oil samples taken from 13 producing wells located at different parts of the field, it is concluded that the crude oil throughout the field has an almost uniform composition. (author)

  13. The field development of the extra heavy oil Orinoco Belt in Morichal : a joint Chinese-Venezuelan effort

    Energy Technology Data Exchange (ETDEWEB)

    Rivodo, E. [Grupo KC, Caracas (Venezuela); Li, G.; Lu, F. [Orifuels Sinoven S.A., Barcelona, Anzoategui (Venezuela)

    2006-07-01

    Proper planning and a systemic approach along with a continual evaluation are important foundations to the development of an extra heavy oil field. This paper discussed a joint effort between China and Venezuela in the field development of extra heavy oil in the Orinoco Belt in Morichal. Background information on the Morichal Oilfield was first presented. The paper discussed the field development approach for pre-operations, including project execution plan; procedures/documents development and review; procurement and services contracts; commissioning and startup; and operations stabilization. The paper also addressed cultural recognition as a judicious approach as well as considerations and recommendations. It was concluded that extra heavy oil field development during the pre-operation stage is a continuous process from planning to startup and stable operations. In addition, a cultural recognition is recommended as a judicious approach to efficient personnel and community affairs management. 9 refs, 8 tabs., 3 figs.

  14. Impact of an indigenous microbial enhanced oil recovery field trial on microbial community structure in a high pour-point oil reservoir.

    Science.gov (United States)

    Zhang, Fan; She, Yue-Hui; Li, Hua-Min; Zhang, Xiao-Tao; Shu, Fu-Chang; Wang, Zheng-Liang; Yu, Long-Jiang; Hou, Du-Jie

    2012-08-01

    Based on preliminary investigation of microbial populations in a high pour-point oil reservoir, an indigenous microbial enhanced oil recovery (MEOR) field trial was carried out. The purpose of the study is to reveal the impact of the indigenous MEOR process on microbial community structure in the oil reservoir using 16Sr DNA clone library technique. The detailed monitoring results showed significant response of microbial communities during the field trial and large discrepancies of stimulated microorganisms in the laboratory and in the natural oil reservoir. More specifically, after nutrients injection, the original dominant populations of Petrobacter and Alishewanella in the production wells almost disappeared. The expected desirable population of Pseudomonas aeruginosa, determined by enrichment experiments in laboratory, was stimulated successfully in two wells of the five monitored wells. Unexpectedly, another potential population of Pseudomonas pseudoalcaligenes which were not detected in the enrichment culture in laboratory was stimulated in the other three monitored production wells. In this study, monitoring of microbial community displayed a comprehensive alteration of microbial populations during the field trial to remedy the deficiency of culture-dependent monitoring methods. The results would help to develop and apply more MEOR processes.

  15. Application of seismic attributes in structural study and fracture analysis of DQ oil field, Iran

    Directory of Open Access Journals (Sweden)

    Shahoo Maleki

    2015-06-01

    Full Text Available The determination of the most unstable areas in oil fields is critical for addressing engineering problems of wellbore and sand production as well as geologic problems such as understanding dynamic constraints on hydrocarbon migration and fracture permeability. In this research work, coherency seismic attribute has been used for the determination of the most critical areas in terms of drilling stabilities in the DQ oil field, Iran. The results obtained have shown that the (1 predominant features are the SSE–NNW and N–S trends (2 the central part of the DQ structure shows the highest concentration of segment bundles, (3 the segment bundles seem to be aligned along some lineaments oriented SE–NW and SSE–NNW, and (4 on the eastern and western margins of the map there is an anomalous concentration of segments oriented E–W. It can be concluded that coherency attribute is a valuable tool for structural analysis highlighting those areas containing unstable features.

  16. A Case Control Study of Lung Cancer Among Workers in Dagang Oil Field, Tianjin, China

    Directory of Open Access Journals (Sweden)

    Yaguang FAN

    2009-01-01

    Full Text Available Background and objective To investigate the risk factors of lung cancer among the employees who had worked in Dagang oil field, Tianjin, China. Methods A matched case control study was conducted to analyse the association between some exposures and lung cancer risk by univariate and multiple Logistic regression method. ResultsAccording to the results from univariate and multiple analysis, smoking and previous lung disease increase lung cancer risk with adjusted OR of 1.52 (95%CI: 1.18-1.94 and 3.37 (95%CI: 1.88-7.16 respectively, while the adjusted OR for occupational chemical toxic substance and dust exposure is 0.73 (95%CI: 0.69-1.30 and 0.84 (95%CI: 0.62-1.15 respectively, and there is no significant association between family history of cancer and lung cancer risk in this study.Conclusion Smoking and previous lung disease are the independent risk factors for lung cancer among workers in Dagang oil field, yet due to some potential epidemiological bias, the association between occupational exposure and lung cancer needs further investigation.

  17. SWD experiment at Southwest Andrews oil field; Nansei Andrews yuden ni okeru SWD jikken

    Energy Technology Data Exchange (ETDEWEB)

    Kozawa, T.; Tsuru, T. [Japan National Oil Corp., Tokyo (Japan)

    1998-04-01

    Seismic while drilling (SWD) is an accurate drilling method by which time-to-depth (T-D) information for determining the accurate bit location and information of bedding boundaries below the bit can be obtained. However, the signal level is rather low compared with the noise generated from the rig during drilling. It is required for improving the S/N ratio to calculate a correlation using reference signals simultaneously acquired using a pilot sensor which is a geophone attached to the rig. Some experiments were conducted in the Southwest Andrews Oil Field. Deterioration of data quality due to the noise particular to the SWD in this oil field could be reduced by proper data acquisition geometry including the minimum offset distance using a geophone array. In order to correct the time, a velocity of P-wave propagating the drill pipe was estimated using auto-correlation of the pilot traces. The S/N ratio was improved by the VSP deconvolution and the stacking effect during VSP-CDP conversion. Thus, could be obtained the accurate T-D information and reflection wave information below the bit. 12 refs., 19 figs., 1 tab.

  18. Water-in-oil emulsification in a non-uniform alternating electric field

    Science.gov (United States)

    Choi, Suhwan; Saveliev, Alexei

    2015-11-01

    The emulsification of a water microdroplet placed in castor oil was performed using a non-uniform alternating electric field formed in the pin-to-plate geometry. A non-uniform electric field of ~40 kV/mm alternating with a frequency of 6.7 kHz was generated near the pin electrode. The applied frequency exceeded charge relaxation frequency of castor oil (0.3 Hz) and was below charge relaxation frequency of deionized water (7.8 kHz) used in the experiments. The emulsification process was captured with a CCD camera. The emulsification process started with entrainment of the water droplet in the high electric filed region near the pin electrode under the dielectrophoretic force. Upon touching the pin, the microdroplet was disintegrated in numerous channels and secondary droplets. The process continued by entrainment of secondary droplets and continuous size reduction. Three droplet breakup mechanisms were identified: drop elongation and capillary breakup, ac electrospraying of individual droplets, chain and bridge formation and decay. The quasi-steady narrow size distribution of emulsified water droplets with diameters close to 1 μm was formed after a few minutes. The generated emulsion was confined near the needle electrode due to the dielectrophoretic force. The emulsion had a well-defined boundary with a shape resembling a pendant drop suspended on the pin electrode.

  19. Degradation and remediation of soils polluted with oil-field wastewater

    Science.gov (United States)

    Gabbasova, I. M.; Suleymanov, R. R.; Garipov, T. T.

    2013-02-01

    The changes in the properties of gray forest soils and leached chernozems under the impact of contamination with highly saline oil-field wastewater were studied in a model experiment. It was shown that the soil contamination results in the development of technogenic salinization and alkalization leading to worsening of the major soil properties. The salinization of the soils with oil-field wastewater transformed the soil exchange complex: the cation exchange capacity decreased, and the exchangeable sodium percentage increased to up to 25% of the CEC upon the wastewater infiltration and up to 60% of the CEC upon the continuous soil saturation with the wastewater independently of the soil type. The content of exchangeable magnesium also increased due to the phenomenon of super-equivalent exchange. Despite the saturation of the soil adsorption complex with sodium, no development of the soil alkalization took place in the presence of the high concentration of soluble salts. However, the soil alkalization was observed upon the soil washing from soluble salts. The gypsum application to the washed soils lowered the exchangeable sodium concentration to acceptable values and normalized the soil reaction. The gypsum application without the preliminary washing of the soils from soluble salts was of low efficiency; even after six months, the content of exchangeable sodium remained very high. The subsequent soil washing resulted in the removal of the soluble salts but did not affect the degree of the soil alkalization.

  20. Stereoselective biodegradation of tricyclic terpanes in heavy oils from the Bolivar Coastal Fields, Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, M. [Stanford University (United States). Dept. of Geological and Environmental Sciences; PDVSA-Intevep, Caracas (Venezuela); Moldowan, J.M.; Dahl, J.E. [Stanford University (United States). Dept. of Geological and Environmental Sciences; Peters, K.E. [Mobil Technology Co., Dallas, TX (United States)

    2001-07-01

    Gas chromatography-mass spectrometry (GC-MS) and GC-MS-MS analyses of heavy oils from Bolivar Coastal Fields (Lagunillas Field) show a complete set of demethylated tricyclic terpanes. As is the case for the 25-norhopanes, the demethylated tricyclics are probably formed in reservoirs by microbially-mediated removal of the methyl group from the C-10 position, generating putative 17-nor-tricyclic terpanes. Diastereomeric pairs of tricyclic terpanes are resolved above C{sub 24} due to resolution of 22S and 22R epimers, but the elution order of the 22S and 22R epimers is unknown. Early-eluting diastereomers (EE) predominate over late-eluting diastereomers (LE) (C{sub 25}-C{sub 29}) in the heavily degraded oils, indicating a stereoselective preference for the LE stereoisomers during biodegradation. Conversely, the LE diastereomers predominate over the EE diastereomers in the 17-nor tricyclic series (C{sub 24}-C{sub 28}), indicating that tricyclic terpanes and 17-nor-tricyclic terpanes are directly linked as precursors and products, respectively. A good correlation exists between the destruction of steranes and the demethylation of hopanes and tricyclic terpanes. This suggests that terpane demethylation occurs during sterane destruction and hopane demethylation, although the rate is slower, indicating that tricyclic terpanes are more resistant to biodegradation. (Author)

  1. CONVENTIONAL OIL LOGGING FOR INTERPRETATION OF OIL FIELD IN YAN' AN REGION%浅谈石油测井常规方法在延安地区井场解释中的应用

    Institute of Scientific and Technical Information of China (English)

    秦长春; 韩要记; 宋晓蛟

    2012-01-01

    延安地区蕴藏着丰富的油藏,用石油测井常规方法对储集层含油性的判断,可以对油井进行有效的井场解释。%Yan' an region is abundant in oll reservoir. Conventional oil logging can be used for oil bearing evaluation of oil reservoirs and effective interpretation of oil well fields in this area.

  2. Water scaling in the North Sea oil and gas fields and scale prediction: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, M.

    1996-12-31

    Water-scaling is a common and major production chemistry problem in the North Sea oil and gas fields and scale prediction has been an important means to assess the potential and extent of scale deposition. This paper presents an overview of sulphate and carbonate scaling problems in the North Sea and a review of several widely used and commercially available scale prediction software. In the paper, the water chemistries and scale types and severities are discussed relative of the geographical distribution of the fields in the North Sea. The theories behind scale prediction are then briefly described. Five scale or geochemical models are presented and various definitions of saturation index are compared and correlated. Views are the expressed on how to predict scale precipitation under some extreme conditions such as that encountered in HPHT reservoirs. 15 refs., 7 figs., 9 tabs.

  3. Modeling winter ozone episodes near oil and natural gas fields in Wyoming

    Science.gov (United States)

    Wu, Yuling; Rappenglück, Bernhard; Pour-Biazar, Arastoo; Field, Robert A.; Soltis, Jeff

    2017-04-01

    Wintertime ozone episodes have been reported in the oil and natural gas (O&NG) producing fields in Uintah Basin, Utah and the Upper Green River Basin (UGRB) in Wyoming in recent years. High concentrations of ozone precursors facilitated by favorable meteorological conditions, including low wind and shallow boundary layer (BL), were found in these episodes, although the exact roles of these precursor species in different O&NG fields are to be determined. Meanwhile, snow cover is also found to play an important role in these winter ozone episodes as the cold snow covered surface enhances the inversion, further limits the BL and the high snow albedo greatly boosts photolysis reactions that are closely related to ozone chemistry. In this study, we utilize model simulation to explore the role of chemical compositions, in terms of different VOC groups and NOx, and that of the enhanced photolysis due to snow cover in the UGRB ozone episodes in the late winter of 2011.

  4. The economics of incremental investments in mature oil fields in the U. K. continental shelf

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, A.G.; Reading, D.

    1991-09-01

    North Sea oil production commenced in the mid 1970s. Many fields have now passed their plateau years of production and are now in their mature phase. From a national viewpoint it is important to ensure that maximum economic benefit is obtained from these fields. This requires sound housekeeping, refurbishment and investment in incremental projects. The economic aspects of such projects are examined in this paper. The purpose is two-fold. Firstly, the study investigates, from an economic viewpoint, the characteristics of such projects in the conditions typically currently to be found in the North Sea. Secondly, the study elucidates the impact of the complex fiscal system in the projects. The issue of possible modification to the tax system is also discussed. (author).

  5. Effect of injecting cold water on oil-output of the beds of the Uzen' field

    Energy Technology Data Exchange (ETDEWEB)

    Borisov, Yu.P.; Kil' dibekova, L.I.; Rozenberg, M.D.; Safronov, S.V.; Teslyuk, Ye.V.

    1979-01-01

    At the Uzen' field, 254 million m/sup 3/ of cold water were injected into the oil area with average temperature 15-16/sup 0/C. This resulted in cooling of the rock-collectors on the order of 538.4 million m/sup 3/ and decrease in oil output by 9.4% as compared to injection of only hot water.

  6. Oil-material fractionation in Gulf deep water horizontal intrusion layer: Field data analysis with chemodynamic fate model for Macondo 252 oil spill.

    Science.gov (United States)

    Melvin, A T; Thibodeaux, L J; Parsons, A R; Overton, E; Valsaraj, K T; Nandakumar, K

    2016-04-15

    Among the discoveries of the Deepwater Horizon blowout was the so-called "sub-surface plume"; herein termed the "oil-trapping layer". Hydrocarbons were found positioned at ~1100-1300m with thickness ~100-150m and moving horizontally to the SW in a vertically stratified layer at the junction of the cold abyssal water and the permanent thermocline. This study focuses on its formation process and fate of the hydrocarbons within. The originality of this work to the field is two-fold, first it provides a conceptual framework which places layer origin in the context of a horizontal "intrusion" from the near-field, vertical, blow-out plume and second, it offers a theoretical model for the hydrocarbon chemicals within the horizontal layer as it moves far-afield. The model quantifies the oil-material fractionation process for the soluble and fine particle. The classical Box model, retrofitted with an internal gradient, the "G-Box", allows an approach that includes turbulent eddy diffusion coupled with droplet rise velocity and reactive decay to produce a simple, explicit, transparent, algebraic model with few parameters for the fate of the individual fractions. Computations show the soluble and smallest liquid droplets moving very slowly vertically through the layer appearing within the trapping layer at low concentration with high persistence. The larger droplets move-through this trapping zone quickly, attain high concentrations, and eventually form the sea surface slick. It impacts the field of oil spill engineering science by providing the conceptual idea and the algorithms for projecting the quantities and fractions of oil-material in a deep water, horizontal marine current being dispersed and moving far afield. In the field of oil spill modeling this work extends the current generation near-field plume source models to the far-field. The theory portrays the layer as an efficient oil-material trap. The model-forecasted concentration profiles for alkanes and aromatics

  7. Field and Model Study to Define Baseline Conditions of Beached Oil Tar Balls along Florida’s First Coast

    Directory of Open Access Journals (Sweden)

    Peter Bacopoulos

    2014-03-01

    Full Text Available Anecdotal data are currently the best data available to describe baseline conditions of beached oil tar balls on Florida’s First Coast beaches. This study combines field methods and numerical modeling to define a data-driven knowledge base of oil tar ball baseline conditions. Outcomes from the field study include an established methodology for field data collection and laboratory testing of beached oil tar balls, spatial maps of collected samples and analysis of the data as to transport/wash-up trends. Archives of the electronic data, including GPS locations and other informational tags, and collected samples are presented, as are the physical and chemical analyses of the collected samples. The thrust of the physical and chemical analyses is to differentiate the collected samples into highly suspect oil tar balls versus false/non-oil tar ball samples. The numerical modeling involves two-dimensional hydrodynamic simulations of astronomic tides. Results from the numerical modeling include velocity residuals that show ebb-dominated residual currents exiting the inlet via an offshore, counter-rotating dual-eddy system. The tidally derived residual currents are used as one explanation for the observed transport trends. The study concludes that the port activity in the St. Johns River is not majorly contributing to the baseline conditions of oil tar ball wash-up on Florida’s First Coast beaches.

  8. Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 34, quarter ending March 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. (ed.)

    1983-07-01

    Progress achieved for the quarter ending March 1983 are presented for field projects and supporting research for the following: chemical flooding; carbon dioxide injection; and thermal/heavy oil. In addition, progress reports are presented for: resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; oil recovered by gravity mining; improved drilling technology; and general supporting research. (ATT)

  9. Impact of oil and gas field in sugar cane condition using landsat 8 in Indramayu area and its surrounding, West Java province, Republic of Indonesia

    Science.gov (United States)

    Muji Susantoro, Tri; Wikantika, Ketut; Saskia Puspitasari, Alia; Saepuloh, Asep

    2017-01-01

    This study tried to monitor sugar cane condition surrounding of oil and gas field area. The spectral approaches were conducted for mapping sugar cane stress. As an initial stage Landsat-8 was corrected radiometrically and geometrically. Radiometric correction is an important stages for spectral approaching. Then all pixel values were transformed to the surface reflectance. Several vegetation indices were calculated to monitor vegetation stress surrounding of oil and gas field. NDVI, EVI, DVI, GVI, GRVI, GDVI and GNDVI were applied for generating tentative sugar cane stress images. The results indicated that sugar cane surrounding of oil and gas field has been influenced by oil and gas field.

  10. Enhanced oil recovery - nitrogen. Large fractures, water drive make Andector field a prime target

    Energy Technology Data Exchange (ETDEWEB)

    Wash, R.

    1982-03-01

    An immiscible nitrogen displacement project is expected to recover 973,928 bbl of tertiary oil from the Andector (Ellenburger) field in NW Ector County, Texas. Operated by Phillips Petroleum Co., the project began November 30, 1981, on the 1293-acre Embar lease in the south fault block of the Andector field, the highest of all Ellenburger fields in W. Texas in terms of cumulative production. (Total production as of January 1, 1981 was 151.2 million bbl). The nitrogen technique was chosen by Phillips due to the type of rock and the active water drive in this area. The aquifer is shared by several other Ellenburger fields in a 3-county area. The formation of interest is a highly fractured, vulgar, medium-to-fine-grained crystalline dolomite, fairly typical for the Ellenburger in W. Texas. It occurs between 7782 ft and 8835 ft. Overall porosity is 3.8%. Permeability is in the 2000-md range. At least 40% of the porosity is in solution cavities or vugs. The way in which nitrogen is used in the Ellenburger is discussed, along with the advantages and disadvantages of its use.

  11. Research and field trials with a blend of ethanol in diesel oil

    Energy Technology Data Exchange (ETDEWEB)

    Egebaeck, K.E. [Autoemission K-E E Consultant, Nykoeping (Sweden)

    1999-03-01

    The aim of this report is to summarize the experiences acquired and data generated during the project named `The mixed fuel project` which was carried out during the years 1993 to 1997. The project was initiated after that some information had been collected in Australia, where a similar project was underway. The Australian project showed some interesting data and within that project an emulsifier had been developed - an emulsifier which has also been used in the Swedish project. In order to avoid a costly development of a method for blending ethanol in diesel oil, a form of co-operation was established between the people involved in Australia and those involved in Sweden. The content of ethanol in diesel oil used in Australia was 15 % and the investigations in Sweden reported further down in this report the ratio 15 % ethanol in MK 1 (an environmentally classified diesel fuel in Sweden) was the best alternative to be used also in Sweden. Twelve reports have been studied and used as references in order to summarize the results and experiences from the project. In order to fulfil the obligations of the project many institutions, private and community companies, consultants and universities in Sweden were involved. In the report presents the main results from the different investigations and field trials with ethanol-diesel fueled vehicles. It can be said that there are no technical problems connected to the use of ethanol-diesel fuel but the most serious drawback is the cost of the fuel. There is also a need for further development of the technology of making a homogenous emulsion of ethanol in diesel oil at a reasonable cost. The main advantage of using the mixed fuel is that the emission of particles is considerably reduced. The emission of CO{sub 2} is also reduced when the ethanol is produced from biomass using an environmentally friendly method 17 refs, 22 figs, 22 tabs

  12. Comparison between micro-emulsion and surfactant solution flooding efficiency for enhanced oil recovery in TinFouye Oil Field

    Energy Technology Data Exchange (ETDEWEB)

    Bouabboune, M.; Benhadid, S. [Applied and Theoretical Fluid Mechanical Laboratory, Algiers (Algeria). Faculty of Physics; Hammouch, N. [Sonatrach, Hydra, Algiers (Algeria). Forage Division

    2006-07-01

    The TinFouye (TFY) reservoir is among the largest oil reservoirs discovered in Algeria. The reservoir has been extensively gas lifted for many years, but gas lift is now reaching its economic limits. Therefore, a tertiary enhancement method is needed. This report investigated the technical feasibility of applying a microemulsion flood to TFY reservoir. The purpose of the study was to optimize the concentration of surfactant, in order to obtain a lower interfacial tension between oil and microemulsion phases, and a high viscosity of the microemulsion compared to that of the oil phase. Another objective was to test the effectiveness of the obtained optimum chemical system for the displacement of residual oil saturation after waterflooding (secondary recovery). TinFouye reservoir conditions and samples were used in this study. Geomechanical equipment was used for the displacement experiments in porous media. Two optimum microemulsion compositions were determined through phase behavior studies: 4 wt per cent anionic surfactant, 2.5 wt per cent pentanol, total salinity of 0.5 g/l. Two surfactant solutions were prepared with the same anionic and alcohol concentration as those of the optimized microemulsions. This made it possible to compare the efficiency of displacing residual oil saturation. 12 refs., 5 tabs., 4 figs.

  13. New device for corrosion monitoring and flow effect evaluation in oil field

    Energy Technology Data Exchange (ETDEWEB)

    Rigual, Yobiris; Hernandez, Samuel; Biomorgi, Jose [PDVSA-INTEVEP. Departamento de Tecnologia de Infraestructura, Apartado 76343, Caracas 1070A (Venezuela)

    2004-07-01

    The monitoring and control of corrosion represent high interest in oil industry to keep the physical installations and prevent future corrosion-related failures. Efficiency and efficacy of the action assigned to reduce these problems are supported by an exhaustive evaluation of corrosion processes. In the Venezuelan oil industry, different techniques of corrosion monitoring have been used as for example weight loss coupons, electrochemical techniques, etc, with the purpose of estimate the useful lifetime of numerous components used in the industry. At the same time, laboratory techniques have been used at static or dynamic conditions, to evaluate the corrosiveness of the different fluids. Because of these techniques have shown certain limitations for field studies, where the flow patterns play an important role; it is necessary to develop new methodologies that allow to take into the account of the fluid dynamics. influence The objective of this work is to show a device, which permit to evaluate the internal corrosion under field operational conditions. This monitoring device consists in a spool placed between pipelines. The inner diameter of the spool is larger compare with the inner diameter of the line. Several teflon rings can be used to allowed the use of different kinds of corrosion specimens and keep the inner diameter of the pipe connected before and after the spool. The specimens (weight loss coupons that permit to carry out further pitting studies) are placed inside the teflon rings in order to evaluate the corrosion process and flow dynamics effect on the material of interest. The utilization of the Online Corrosion Evaluation System (SECLI by the spanish initials) allowed a deep evaluation of the fluid corrosiveness and the corrosion mechanism characterization. In fact, a comparison between two different inner diameter device (4 inches and 6 inches) permits to establish a flow effect on some Venezuelan crude oil corrosiveness, which form a pitting

  14. RESERVOIR CHARACTERIZATION OF UPPER DEVONIAN GORDON SANDSTONE, JACKSONBURG STRINGTOWN OIL FIELD, NORTHWESTERN WEST VIRGINIA

    Energy Technology Data Exchange (ETDEWEB)

    S. Ameri; K. Aminian; K.L. Avary; H.I. Bilgesu; M.E. Hohn; R.R. McDowell; D.L. Matchen

    2001-07-01

    The Jacksonburg-Stringtown oil field contained an estimated 88,500,000 barrels of oil in place, of which approximately 20,000,000 barrels were produced during primary recovery operations. A gas injection project, initiated in 1934, and a pilot waterflood, begun in 1981, yielded additional production from limited portions of the field. The pilot was successful enough to warrant development of a full-scale waterflood in 1990, involving approximately 8,900 acres in three units, with a target of 1,500 barrels of oil per acre recovery. Historical patterns of drilling and development within the field suggests that the Gordon reservoir is heterogeneous, and that detailed reservoir characterization is necessary for understanding well performance and addressing problems observed by the operators. The purpose of this work is to establish relationships among permeability, geophysical and other data by integrating geologic, geophysical and engineering data into an interdisciplinary quantification of reservoir heterogeneity as it relates to production. Conventional stratigraphic correlation and core description shows that the Gordon sandstone is composed of three parasequences, formed along the Late Devonian shoreline of the Appalachian Basin. The parasequences comprise five lithofacies, of which one includes reservoir sandstones. Pay sandstones were found to have permeabilities in core ranging from 10 to 200 mD, whereas non-pay sandstones have permeabilities ranging from below the level of instrumental detection to 5 mD; Conglomeratic zones could take on the permeability characteristics of enclosing materials, or could exhibit extremely low values in pay sandstone and high values in non-pay or low permeability pay sandstone. Four electrofacies based on a linear combination of density and scaled gamma ray best matched correlations made independently based on visual comparison of geophysical logs. Electrofacies 4 with relatively high permeability (mean value > 45 mD) was

  15. Experimental and computational studies of water drops falling through model oil with surfactant and subjected to an electric field

    CERN Document Server

    Ervik, Åsmund; Munkejord, Svend Tollak; Müller, Bernhard

    2014-01-01

    The behaviour of a single sub-millimetre-size water drop falling through a viscous oil while subjected to an electric field is of fundamental importance to industrial applications such as crude oil electrocoalescers. Detailed studies, both experimental and computational, have been performed previously, but an often challenging issue has been the characterization of the fluids. As numerous authors have noted, it is very difficult to have a perfectly clean water-oil system even for very pure model oils, and the presence of trace chemicals may significantly alter the interface behaviour. In this work, we consider a well- characterized water-oil system where controlled amounts of a surface active agent (Span 80) have been added to the oil. This addition dominates any trace contaminants in the oil, such that the interface behaviour can also be well-characterized. We present the results of experiments and corresponding two-phase- flow simulations of a falling water drop covered in surfactant and subjected to a mono...

  16. Effect of nitrogen form for the amendment of crude oil bioremediation field experiment in the Sea of Japan

    Energy Technology Data Exchange (ETDEWEB)

    Maki, H.; Hiwatari, T.; Kohata, K.; Watanabe, M. [National Inst. for Environmental Studies, Tsukuba, Ibaraki (Japan); Miyazaki, H.; Yamasaki, F.; Tanimoto, T. [Hyogo Perfectural Inst. of Environmental Science, Hyogo (Japan)

    2002-07-01

    Some small-scale field experiments have been conducted regarding the bioremediation of oil at a rocky beach in the Sea of Japan. During the 4 month experiment, artificial mixtures of weathered Arabian light crude oil and sand were wrapped in teflon net envelopes which were placed in perforated vessels to facilitate exchange with seawater in the intertidal area. Two inorganic and two organic slow release nitrogen fertilizers were added to the oil and sand mixtures which were then periodically sampled and analyzed using gas chromatography-mass spectrometry. Individual petroleum compounds degraded at a quicker rate when fertilizer was added. In addition, fertilizer helped to remove the oil from the sand. After 4 months, the oil content in the sands fertilized with ammonium sulfate, urea and isobutylidene diurea (IBDU) was one third that of the control sand. Ammonium nitrate fertilizers did not work as well at removing the oil from the sand. It was concluded that organic nitrogen fertilizers such as urea and IBDU have significant potential to stimulate microbial degradation and physical removal of oil rather than organic nitrogen fertilizers. 16 refs., 3 figs.

  17. Iran: review of petroleum developments and assessments of the oil and gas fields

    Energy Technology Data Exchange (ETDEWEB)

    Shammas, P. [APS Energy Group, Nicosia (Cyprus)

    2001-07-01

    In this review the author comments on the likelihood of a significant improvement in the relationship between Iran and the US, with vital implications for the Middle East, during US President George Bush's term of office. From an American perspective, normalising relations with Iran will provide critical geopolitical advantages related to its energy security from the Persian Gulf and the Caspian Sea as well as increased strategic options in dealing with Iraq and with an unstable Afghanistan. From the Iranian perspective, a breakthrough in relations with Washington will mean increased strategic leverage as a major transit route for oil and gas exports from Central Asia and an enhanced status in the region. Tehran will also be in a better position to balance its relations with the US, Russia and China to its own benefit. There are obstacles in the way, including deep mistrust among conservation factions in Tehran and Washington, but the road to normalisation has been paved gradually since President Mohammed Khatami took office in August 1997. The author also comments on the Iranian energy base; their geology and petroleum, oil and gas fields; refining sector; and their gas processing and export projects. (author)

  18. Environmental safety of underground injection of oil field brines in Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    Conger, R.M.

    1986-09-01

    Louisiana contains almost 4000 brine injection wells that dispose an estimated 1 billion bbl of brine each year, making underground injection that state's most widely practiced method of oil field brine disposal. Louisiana has had no known contamination of a public water supply from underground brine injection; however, the magnitude of this activity presents a potential for contamination if proper disposal practices are not followed. Following the earliest discovery of oil, the petroleum industry has been improving methods to protect ground-water aquifers from underground injection. Although economic incentives spurred the earliest use of underground injection, the technology has progressed to become a method providing environmental safety to ground-water aquifers. Complex reservoir modeling, developed for use in secondary and enhanced recovery techniques, has been applied to simulate pressure effects and vertical migration potential for underground injection reservoirs. Conventional well designs that allow monitoring of well conditions have replaced older, unreliable designs. Improvements in wireline logging make it possible to test the isolation of injected brines from vertical movement along the well bore.

  19. Exposures and cancer incidence near oil fields in the Amazon basin of Ecuador.

    Science.gov (United States)

    San Sebastián, M; Armstrong, B; Córdoba, J A; Stephens, C

    2001-08-01

    To examine environmental exposure and incidence and mortality of cancer in the village of San Carlos surrounded by oil fields in the Amazon basin of Ecuador. Water samples of the local streams were analyzed for total petroleum hydrocarbons (TPHs). A preliminary list of potential cancer cases from 1989 to 1998 was prepared. Cases were compared with expected numbers of cancer morbidity and mortality registrations from a Quito reference population. Water analysis showed severe exposure to TPHs by the residents. Ten patients with cancer were diagnosed while resident in the village of San Carlos. An overall excess for all types of cancer was found in the male population (8 observed v 3.5 expected) with a risk 2.26 times higher than expected (95% confidence interval (95% CI) 0.97 to 4.46). There was an overall excess of deaths for all types of cancer (6 v 1.6 expected) among the male population 3.6 times higher than the reference population (95% CI 1.31 to 7.81). The observed excess of cancer might be associated with the pollution of the environment by toxic contaminants coming from the oil production.

  20. Human health cost of hydrogen sulfide air pollution from an oil and gas Field.

    Science.gov (United States)

    Kenessary, Dinara; Kenessary, Almas; Kenessariyev, Ussen Ismailovich; Juszkiewicz, Konrad; Amrin, Meiram Kazievich; Erzhanova, Aya Eralovna

    2017-06-08

    Introduction and objective. The Karachaganak oil and gas condensate field (KOGCF), one of the largest in the world, located in the Republic of Kazakhstan (RoK) in Central Asia, is surrounded by 10 settlements with a total population of 9,000 people. Approximately73% of this population constantly mention a specific odour of rotten eggs in the air, typical for hydrogen sulfide (H2S) emissions, and the occurrence of low-level concentrations of hydrogen sulfide around certain industrial installations (esp. oil refineries) is a well known fact. Therefore, this study aimed at determining the impact on human health and the economic damage to the country due to H2S emissions. Materials and method. Dose-response dependency between H2S concentrations in the air and cardiovascular morbidity using multiple regression analysis was applied. Economic damage from morbidity was derived with a newly-developed method, with Kazakhstani peculiarities taken into account. Results.Hydrogen sulfide air pollution due to the KOGCF activity costs the state almost $60,000 per year. Moreover, this is the reason for a more than 40% rise incardiovascular morbidity in the region. Conclusion. The reduction of hydrogen sulfide emissions into the air is recommended, as well as successive constant ambient air monitoring in future. Economic damage evaluation should be made mandatory, on a legal basis, whenever an industrial facility operation results in associated air pollution.

  1. Laboratory development and field application of novel cement system for cementing high-temperature oil wells

    Energy Technology Data Exchange (ETDEWEB)

    Wan, X.; Zhang, H.; Li, Y.; Yang, Y. [SINOPEC, Beijing (China); Shan, H.; Xiao, Z. [OPT, Beijing (China)

    2010-07-01

    The challenges that oil and gas well engineers face when cementing mid-to-high temperature exploration oil and gas wells were discussed. A newly developed cement system with an effective laminar-flow spacer was presented along with case histories that document the system's effectiveness for cementing high temperature exploration wells. The problems associated with cementing high temperature exploration wells include high bottom hole static temperature; very low pump rates; and very long job times. These challenges contribute to the operational risks during cement slurry placement in the wellbore as well as during cement sheath setting during the life of the well. The new cement formulation presented in this paper addresses these challenges. Eight jobs have been completed in the field with much success. The combination of a new retarder and fluid loss control additive improves the system performance considerably in terms of low fluid loss rate, minimal free water, proper rheology, predictable thickening time, high resistance to salt contaminations and no adverse effect on set cement strength. The drilling muds are effectively displaced by the laminar flow spacer, thus improving the cementing bond. 9 refs., 5 tabs., 6 figs.

  2. The experience of arranging a back-up oil well group using the seventh bed at the Zhetybai field as an example

    Energy Technology Data Exchange (ETDEWEB)

    Lysenko, V.D.; Ermekov, A.K.; Leibin, E.L.; Savvin, K.F.; Vaslavskii, A.F.

    1981-01-01

    A method is proposed for arranging a back-up series of oil wells using the oil pool of the eighth bed located at the Zhetybai field, which has an underlying layer of water, as an example. Using a record of tapped and remaining oil reserves together with maps of existing isopachs, which were drafted accounting for the rising velocities of the water-oil contact at various sections in the bed, the placement of oil wells at one section or another of the bed is calculated. The number of oil wells is substantiated using a record of the remaining oil reserves together with a proposed oil yield standard for a single oil well.

  3. The problem in transportation of high waxy crude oils through submarine pipelines at JV Vietsovpetro oil fields, offshore Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Thuc, P. D.; Bich, H. V.; Son, T. C.; Hoe, L. D.; Vygovskoy, V. P. [J. V. Vietsovpetro (Viet Nam)

    2003-06-01

    Problems encountered in transporting crude oil with high wax content in a submarine pipeline, built without thermal insulation, are reviewed. The focus is on crystallization and deposition of the wax on the walls, the resulting reduction in pipeline diameter leading to higher pressure drop, and the formation of gelled interlocking structures of wax crystals in the pipeline which can lead to shutdown. Methods to reduce wax deposition and gelling, and modelling to predict restart pressures and flow characteristics to improve the pumpability of Vietsovpetro's high paraffin crude oil are described. 6 refs., 5 tabs., 1 fig.

  4. An efficient thermotolerant and halophilic biosurfactant-producing bacterium isolated from Dagang oil field for MEOR application

    Science.gov (United States)

    Wu, Langping; Richnow, Hans; Yao, Jun; Jain, Anil

    2014-05-01

    Dagang Oil field (Petro China Company Limited) is one of the most productive oil fields in China. In this study, 34 biosurfactant-producing strains were isolated and cultured from petroleum reservoir of Dagang oil field, using haemolytic assay and the qualitative oil-displacement test. On the basis of 16S rDNA analysis, the isolates were closely related to the species in genus Pseudomonas, Staphylococcus and Bacillus. One of the isolates identified as Bacillus subtilis BS2 were selected for further study. This bacterium was able to produce a type of biosurfactant with excessive foam-forming properties at 37ºC as well as at higher temperature of 55ºC. The biosurfactant produced by the strain BS2 could reduce the surface tension of the culture broth from 70.87 mN/m to 28.97 mN/m after 8 days of incubation at 37ºC and to 36.15 mN/m after 20 days of incubation at 55ºC, respectively. The biosurfactant showed stability at high temperature (up to 120ºC), a wide range of pH (2 to 12) and salt concentrations (up to 12%) offering potential for biotechnology. Fourier transform infrared (FT-IR) spectrum of extracted biosurfactant tentatively characterized the produced biosurfactant as glycolipid derivative. Elemental analysis of the biosurfactant by energy dispersive X-ray spectroscopy (EDS) reveals that the biosurfactant was anionic in nature. 15 days of biodegradation of crude oil suggested a preferential usage of n-alkane upon microbial metabolism of BS2 as a carbon substrate and consequently also for the synthesis of biosurfactants. Core flood studies for oil release indicated 9.6% of additional oil recovery over water flooding at 37ºC and 7.2% of additional oil recovery at 55 ºC. Strain BS2 was characterized as an efficient biosurfactant-producing, thermotolerant and halophillic bacterium and has the potential for application for microbial enhanced oil recovery (MEOR) through water flooding in China's oil fields even in situ as adapted to reservoir chemistry and

  5. Secondary ferroan dolomite rhombs in oil reservoirs, Chadra Sands, Gialo field, Libya

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shaieb, Z.; Shelton, J.W.

    1978-03-01

    Oil-productive, Oligocene Chadra sands in Gialo field, Libya, at depths of 600 to 750 m contain small dolomite rhombs. The rhombs are present as single crystals on detrital grains and as nonmosaic aggregates in pore space. The dolomite is calcium-rich and contains up to 10% iron but not measurable sodium or strontium. Total dissolved solids of produced interstitial water from the Chadra sand range from about 4,500 to 10,000 ppM. Introduction of fresh (meteoric) water into the Chadra sands, which were deposited in shallow-marine (shelf) environment, was responsible for formation of the dolomite rhombs. Iron in the dolomite rhombs was derived from alteration of galuconite.

  6. Biodegradation of marine surface floating crude oil in a large-scale field simulated experiment.

    Science.gov (United States)

    Bao, Mutai; Sun, Peiyan; Yang, Xiaofei; Wang, Xinping; Wang, Lina; Cao, Lixin; Li, Fujuan

    2014-08-01

    Biodegradation of marine surface floating crude oil with hydrocarbon degrading bacteria, rhamnolipid biosurfactants, and nutrients was carried out by a large-scale field simulated experiment in this paper. After a 103 day experiment, for n-alkanes, the maximum biodegradation rate reached 71% and the results showed hydrocarbon degrading bacteria, rhamnolipid biosurfactants, and nutrients have a comprehensive effect. It also showed that rhamnolipid biosurfactants could shorten the biodegradation time through an emulsifying function; the nutrients could greatly increase the biodegradation rate by promoting HDB production. For PAHs, the chrysene series had higher weathering resistance. For the same series, the weathering resistance ability is C1- biodegradation was found for different n-alkanes in two pools which only had added rhamnolipid biosurfactants or nutrients, respectively. Except for C14, C15 and C16 sesquiterpanes, most of the steranes and terpanes had high antibiodegradability.

  7. Inactivation of Bacteria in Oil Field Injected Water by a Pulsed Plasma Discharge Process

    Science.gov (United States)

    Xin, Qing; Li, Zhongjian; Lei, Lecheng; Yang, Bin

    2016-09-01

    Pulsed plasma discharge was employed to inactivate bacteria in the injection water for an oil field. The effects of water conductivity and initial concentration of bacteria on elimination efficiency were investigated in the batch and continuous flow modes. It was demonstrated that Fe2+ contained in injection water could enhance the elimination efficiency greatly. The addition of reducing agent glutathione (GSH) indicated that active radicals generated by pulsed plasma discharges played an important role in the inactivation of bacteria. Moreover, it was found that the microbial inactivation process for both batch and continuous flow mode well fitted the model based on the Weibull's survival function. supported by Zhejiang Province Welfare Technology Applied Research Project of China (No. 2014C31137), National Natural Science Foundation of China (Nos. 21436007 and U1462201), and the Fundamental Research Funds for the Central Universities of China (No. 2015QNA4032)

  8. Seismic Wave Attenuation in Fractured Reservoir: Application on Abu Dhabi Oil Fields.

    Science.gov (United States)

    Bouchaala, F.; Ali, M.; Matsushima, J.

    2016-12-01

    There is a close link between fractures network and fluids circulation so information about nature and geometry of fractures in the reservoir zone is benificial for the petroleum industry. However the immaturity of the methodology and the complication of fractures network in some reservoirs like those of Abu Dhabi oil fields, make getting such information challenging. Since several studies showed the close link between physical properties of the subsurface and seismic wave attenuation (eg. Müller et al. 2010), we use this parameter in this study to assess its potentiality on fractures detection and characterization, even though its use is not common for reservoir characterization and even less for fractures characterization. To get an accurate attenuation profiles, we use a robust methods recently developed to estimate accurately attenuation from Vertical Seismic Profiling (VSP) (Matsushima et al. 2016) and sonic waveforms (Suziki and Matsushima 2013) in the reservoir zones. The data were acquired from many wells located in offshore and onshore oil fields of Abu Dhabi region. The subsurface of this region is mainly composed of carbonate rocks, such media are known to be highly heterogeneous. Scattering and intrinsic attenuation profiles were compared to interpreted fractures by using Formation Micro-imager (FMI). The comparison shows a correlation between these two parameters and fractures characteristic, such as their density and dipping. We also performed Alford rotation on dipole data to estimate the attenuation from fast and slow shear waveforms. The anisotropy is proportional to the dispersion of the points plotted from the ratio between the intrinsic attenuation of fast and slow shear over the depth, from the line (Qslow /Qfast=1), which corresponds to the isotropic case. We noticed that the zones with low fractures density display less dispersion than those of high density. Even though our results show potentiality of the attenuation for fractured

  9. Lithological and petrophysical evaluation of the caprock keybeds, Asmari Reservoir of Pazanan Oil Field, Zagros, Iran

    Directory of Open Access Journals (Sweden)

    Bahman Soleimani

    2010-01-01

    Full Text Available The Pazanan oil field is located 150 km SE of ahvaz city in SW of Iran and measures 60 km long, 4-6 km wide. The caprock of this oil field were evaluated using well logs (gamma-ray and sonic logs SEM and petrographical microscopy data. The cap rock consist of mudstone, interlayers of anhydrite and bitumens shale. Therefore, it can be classified as mudstone type. On the basis of our investigations, the Caprock can be divided in to 6 keybeds: A(Anhydrite, B(Bitumenshale & some times bitumen marls, C (mudstone with interlayers of shale & anhydrite, D (mudstone & anhydrite, E (mudstone& F(mudstone & packstone, almost all of these units coverd by salt. Anhydrite beds show the following textures: microlitic, spherolite, porphyroblast, and granular. Anhydrite crystals indicate the occurrence of processes such as emplacement and calcitization. Sonic and gamma-ray well logs were used to determine lithological changes. The highest peak is correlated with mudstone units. Caprock depth varies from 2580m(min-2717m(max [northern part], 1704(min. - 2444(max. [central part],And 2050 (min.- 2490 (max. [southern part] using well drilling data. It seems that that the thickness in the southern part is less than is other part. Comparing the thicknesses of different keybeds. The maximum occurs in the c-keybeds. The sedimentar : sequence of Caprock started by mudstone, packstone and interlayers of anhydrite, followed by mudstone, anhydrite, shale-marl, as well as bitumen shale, mudstone and anhydrite and finally was overlaid by salt. Lithological variation indicate a sabkha-lacustrine environment. Therefore, the hot-wet and hot-dry climate was dominated. In some cases, Caprock thickness decreases to 6m without any gap. This thinning is related to structural deformation. Unfavorable lithologyconditions resulted is well collaps.

  10. Investigating electrokinetics application for in-situ inorganic oil field scale control

    Science.gov (United States)

    Hashaykeh, Manal A. I. Albadawi

    Oil well scale formation and deposition is an expensive problem and could be a nightmare for any production engineer if the rate of deposition is rapid as in the case of North Sea oil fields. Inorganic scales accumulate in surface and subsurface equipment causing a reduction in oil production and severe damage for production equipment. The major components of most oil field scale deposits are BaSO4, CaSO4 and SrSO4, which are formed due to incompatible mixing of reservoir formation water and sea water flooded in secondary enhanced oil recovery (EOR) processes. This work focuses on BaSO4 scale as it is one of the toughest scale components to be removed either by chemical means or mechanical means. Scale control methods usually involve complicated treatment using chemical dissolution methods as primary attempt and mechanical scrapping or jetting methods in case of failure of the chemical means. In this work, we devised a novel in-situ scale control method benefiting from the application of direct current (DC) which involves some of the electrokinetic (EK) phenomena. The applications of EK has been proved in our laboratories yielding high efficiency in capturing barium and separating it from sulfate before reaching the production well, thus preventing deposition in the production wellbore or wellbore formation. This objective was evaluated in our lab designed EK apparatus in three parts. In part-1, an 18.5 cm unconsolidated sand core was used which produced inconsistent results. This problem was overcome in part-2, where the porous media involved 46 cm consolidated sandcore. This also partly fulfilled the purpose of upscaling. In part-3, the porous media was extended to a 100 cm spatial distance between the injection and production wells. For all the experiments the reservoir models were made of 125 µm uniform sand particles and followed a final consolidation pressure of 30 psi. The EK-reservoir model contains 2 basic junctions; one of them injecting a 500 ppm SO4 2

  11. Laboratory testing and simulation of the paraffin deposition in Turija field oil well in Vojvodina region, Serbia

    Directory of Open Access Journals (Sweden)

    Danilović Dušan Š.

    2011-01-01

    Full Text Available In Serbia approx. 70% of the crude oil produced accounts for the heavy oil type, these results in the deposition of paraffin in wells, oil production decrease while increasing the operating costs. Different methods, such as mechanical, chemical and thermal, are applied in effort to solve the paraffin deposition problem. Most methods require an accurate determination of that the deposition zone in well. In this paper, experimental and simulation results of the parameter analysis affecting intensity and zone of paraffin deposition in oil wells are presented. The analysis has been done for heavy oil produced from the oil field Turija, Vojvodina region, Serbia. The paraffin deposition curves and paraffin deposition intensity during time are experimentally defined. The influence of temperature gradient, fluid flow rate and gas content in oil changes on the paraffin deposition zone change was analyzed by the computer simulation. It was found that temperature gradient changes can cause paraffin deposition zone to change approx. 22 m, i.e. maximum 43 m. It was also determined that the length of paraffin deposition zone can change up to 140 m due to the changes in the fluid flow rate or in the gas content in oil. The increase of the flow rate causes paraffin deposition zone to reduce, while increased gas content in oil leads to its increase. On the basis of the obtained results, the optimal working parameters of mechanical method, such as frequency and depth of paraffin scraping as well as temperature and heating cable power of thermal methods can be determined.

  12. Magnetic Susceptibility Analysis of Soil Affected by Hydrocarbon in Wonocolo Traditional Oil Field, Indonesia

    Science.gov (United States)

    Ulfah, Melianna; Wijatmoko, Bambang; Fitriani, Dini

    2017-04-01

    Magnetic susceptibility of soil affected by hydrocarbon was studied through cored soil samples in two zones (Zone One and Zone Two) of an oil field in Wonocolo Village, East Java. We also collected soil samples as the background from a residential area near the oil field (Zone Three). The Zone One, consisted two cores near producing well; the Zone Two consisted two cores obtained from near a dry hole well and a discontinued well; and the Zone Three consisted two cores to validate the initial soil magnetic susceptibility value in this area. The hydrocarbon content measurement was also done for the upper part of each cores using distillation method to identify the correlation between magnetic susceptibility and hydrocarbon content. From magnetic susceptibility measurement in dual frequency, samples from the Zone One and Zone Two have magnetic susceptibility range from 6,1 × 10-8 m3kg-1 - 160 × 10-8 m3kg-1 and 15,7 × 10-8 m3kg-1 - 417,9 × 10-8 m3kg-1, respectively. Whereas background samples from Zone Three have magnetic susceptibility range from 4,8 × 10-8 m3kg-1 to 81,1 × 10-8 m3kg-1. We found low χfd (%) in samples with high magnetic susceptibility values, shown that there was no indication of superparamagnetic minerals in the samples. The hydrocarbon content measurement shows the value range of 8% - 14% only exists in the upper part of all cores in Zone One and one core in Zone Two. From this analysis, we assume that other than the volume of the hydrocarbon content in soil, the period of petroleum hydrocarbon deposition in soil and the fossil fuel combustion generated in the study site could differently increase the soil magnetic susceptibility value in this area. Positive correlation between the two parameters hopefully could contribute to develop environmental magnetic methods for detecting oil spills in soil, especially to remediate former hydrocarbon exploration and production area.

  13. Potential evaluation and systemic analysis for sustainable development of heavy oil fields in Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Gambaretto, A.; Zanardi, E.; Zangari, L. [Inst. Tecnologico Buenos Aires (Argentina)

    2010-07-01

    This paper presented an overview of Argentina's heavy oil potential. Dynamic modelling techniques were used to simulate various oil recovery scenarios as well as to evaluate factors that may influence the long-term evolution of the country's heavy oil industry. Reserves were assessed. Differential oil prices were considered, as well as various tax and royalty scenarios. A temporal horizon of 30 years was used to consider various industry scenarios in relation to general trends in heavy oil production. The simulation also considered the total operational margin and returns per productive well. The study showed that an increase in the price of oil will not necessarily create a favourable environment for the sustainable development of heavy oil. Gradual increases in oil prices in relation to costs are needed to ensure long-term production stability. Results of the study will be used in decision-making and policy development. 10 refs., 1 tab., 10 figs.

  14. Innovative well-completion strategy for challenging heavy-oil wells within mature fields requiring sand control in Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Huimin, YE; Patarroyo, Mauricio [Mansarovar Energy (Colombia); Lopez, Nicolas; Perez, Carlos [Schlumberger (Colombia)

    2011-07-01

    With the depletion of conventional oil resources and the development of new techniques, exploitation of heavy oil wells has become common in Northern South America. Nevertheless those projects face the great challenge of implementing environment and sand management systems while optimizing the production and reservoir's life. The aim of this paper is to present a completion methodology, its results and impacts on the productivity of the reservoir. Different simulations to select the sand control strategy and sensitivity studies to confirm their decision were carried out in the Moriche field, a heavy-oil mature field located in Colombia. Following the simulation results, stainless steel wool based screens were finally chosen and their implementation led to savings in time and costs and the elimination of downhole issues. The use of the completion methodology presented herein on the Moriche wells led to an overall improvement in productivity.

  15. Environmental monitoring survey of oil and gas fields in Region II in 2009. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    2010-03-15

    The oil companies Statoil ASA, ExxonMobil Exploration and Production Norway AS, Total E&P Norge AS, Talisman Energy Norge AS and Marathon Petroleum Norge AS commissioned Section of Applied Environmental Research at UNI RESEARCH AS to undertake the monitoring survey of Region II in 2009. Similar monitoring surveys in Region II have been carried out in 1996, 2000, 2003 and 2006. The survey in 2009 included in total 18 fields: Rev, Varg, Sigyn, Sleipner Vest, Sleipner OEst, Sleipner Alfa Nord, Glitne, Grane, Balder, Ringhorne, Jotun, Vale, Skirne, Byggve, Heimdal, Volve, Vilje og Alvheim. Sampling was conducted from the vessel MV Libas between May 18 and May 27. Samples were collected from in totally 137 sampling sites, of which 15 were regional sampling sites. Samples for chemical analysis were collected at all sites, whereas samples for benthos analysis were collected at 12 fields. As in previous surveys, Region II is divided into natural sub-regions. One sub-region is shallow (77-96 m) sub-region, a central sub-region (107-130 m) and a northern subregion (115-119 m). The sediments of the shallow sub-region had relatively lower content of TOM and pelite and higher content of fine sand than the central and northern sub-regions. Calculated areas of contamination are shown for the sub-regions in Table 1.1. The fields Sigyn, Sleipner Alfa Nord, Glitne, Grane, Balder, Ringhorne, Jotun, Skirne, Byggve, Vilje og Alvheim showed no contamination of THC. At the other fields there were minor changes from 2006. The concentrations of barium increased in the central sub-region from 2006 to 2009, also at fields where no drilling had been undertaken during the last years. The same laboratory and methods are used during the three last regional investigations. The changes in barium concentrations may be due to high variability of barium concentrations in the sediments. This is supported by relatively large variations in average barium concentrations at the regional sampling sites in

  16. Time lapse seismic observations and effects of reservoir compressibility at Teal South oil field

    Science.gov (United States)

    Islam, Nayyer

    One of the original ocean-bottom time-lapse seismic studies was performed at the Teal South oil field in the Gulf of Mexico during the late 1990's. This work reexamines some aspects of previous work using modern analysis techniques to provide improved quantitative interpretations. Using three-dimensional volume visualization of legacy data and the two phases of post-production time-lapse data, I provide additional insight into the fluid migration pathways and the pressure communication between different reservoirs, separated by faults. This work supports a conclusion from previous studies that production from one reservoir caused regional pressure decline that in turn resulted in liberation of gas from multiple surrounding unproduced reservoirs. I also provide an explanation for unusual time-lapse changes in amplitude-versus-offset (AVO) data related to the compaction of the producing reservoir which, in turn, changed an isotropic medium to an anisotropic medium. In the first part of this work, I examine regional changes in seismic response due to the production of oil and gas from one reservoir. The previous studies primarily used two post-production ocean-bottom surveys (Phase I and Phase II), and not the legacy streamer data, due to the unavailability of legacy prestack data and very different acquisition parameters. In order to incorporate the legacy data in the present study, all three post-stack data sets were cross-equalized and examined using instantaneous amplitude and energy volumes. This approach appears quite effective and helps to suppress changes unrelated to production while emphasizing those large-amplitude changes that are related to production in this noisy (by current standards) suite of data. I examine the multiple data sets first by using the instantaneous amplitude and energy attributes, and then also examine specific apparent time-lapse changes through direct comparisons of seismic traces. In so doing, I identify time-delays that, when

  17. Field induced anomalous spreading, oscillation, ejection, spinning, and breaking of oil droplets on a strongly slipping water surface.

    Science.gov (United States)

    Kumar, Sunny; Sarma, Bhaskarjyoti; Dasmahapatra, Ahsok Kumar; Dalal, Amaresh; Basu, Dipankar Narayan; Bandyopadhyay, Dipankar

    2017-07-01

    Application of an electric field on an oil droplet floating on the surface of a deionized water bath showed interesting motions such as spreading, oscillation, and ejection. The electric field was generated by connecting a pointed platinum cathode at the top of the oil droplet and a copper anode coated with polymer at the bottom of the water layer. The experimental setup mimicked a conventional electrowetting setup with the exception that the oil was spread on a soft and deformable water isolator. While at relatively lower field intensities we observed spreading of the droplet, at intermediate field intensities the droplet oscillated around the platinum cathode, before ejecting out at a speed as high as ∼5 body lengths per second at even stronger field intensities. The experiments suggested that when the electric field was ramped up abruptly to a particular voltage, any of the spreading, oscillation, or ejection motions of the droplet could be engendered at lower, intermediate and higher field intensities, respectively. However, when the field was ramped up progressively by increasing by a definite amount of voltage per unit time, all three aforementioned motions could be generated simultaneously with the increase in the field intensity. Interestingly, when the aforementioned setup was placed on a magnet, the droplet showed a rotational motion under the influence of the Lorentz force, which was generated because of the coupling of the weak leakage current with the externally applied magnetic field. The spreading, oscillation, ejection, and rotation of the droplet were found to be functions of the oil-water interfacial tension, viscosity, and size of the oil droplet. We developed simple theoretical models to explain the experimental results obtained. Importantly, rotating at a higher speed broke the droplet into a number of smaller ones, owing to the combined influence of the spreading due to the centripetal force and the shear at the oil-water interface. While

  18. Hydraulic Fracturing of 403 Shallow Diatomite Wells in South Belridge Oil Field, Kern County, California, in 2014

    Science.gov (United States)

    Wynne, D. B.; Agusiegbe, V.

    2015-12-01

    We examine all 403 Hydraulic Fracture (HF) jobs performed by Aera Energy, LLC, in the South Belridge oil field, Kern County, CA in 2014. HFs in the South Belridge oil field are atypical amongst North American plays because the reservoir is shallow and produced via vertical wells. Our data set constitutes 88% of all HF jobs performed in CA oil fields in calendar-2014. The South Belridge field produces 11% of California's oil and the shallow HFs performed here differ from most HFs performed elsewhere. We discuss fracture modeling and methods and summary statistics, and modelled dimensions of fractures and their relationships to depth and reservoir properties. The 403 HFs were made in the diatomite-dominated Reef Ridge member of the Monterey Formation. The HFs began at an average depth of 1047 feet below ground (ft TVD) and extended an average of 626 ft vertically downward. The deepest initiation of HF was at 2380 ft and the shallowest cessation was at 639 ft TVD. The average HF was performed using 1488 BBL (62,496 gallons) of water. The HFs were performed in no more than 6 stages and nearly all were completed within one day. We (1) compare metrics of the South Belridge sample group with recent, larger "all-CA" and nationwide samples; and (2) conclude that if relationships of reservoir properties, well completion and HF are well understood, shallow diatomite HF may be optimized to enhance production while minimizing environmental impact.

  19. Tilting oil-water contact in the chalk of Tyra Field as interpreted from capillary pressure data

    DEFF Research Database (Denmark)

    Fabricius, Ida Lykke; Rana, M.A.

    2010-01-01

    -trends from logs were compared with normalized water saturation depth-trends predicted from capillary pressure core data. The ten wells lie close to a SW–NE cross section of the field. For the gas–oil contact, a free contact measured in one well corresponds to a practically horizontal contact interpreted from......The Tyra Field in the central North Sea is located in Palaeogene and Upper Cretaceous chalk. It contains a natural gas zone underlain by an oil leg. Based on analysis of logs and core data from ten wells drilled prior to the field being put into production, normalized water saturation depth...... logging data in the remaining wells. A westerly dipping oil–water contact was found from logging data. Comparison of the depth-wise trends in normalized water saturation among the different wells indicates a regional pattern: in the western side of the field, the trends correspond to a situation...

  20. Olive oil pilot-production assisted by pulsed electric field: impact on extraction yield, chemical parameters and sensory properties.

    Science.gov (United States)

    Puértolas, Eduardo; Martínez de Marañón, Iñigo

    2015-01-15

    The impact of the use of pulsed electric field (PEF) technology on Arroniz olive oil production in terms of extraction yield and chemical and sensory quality has been studied at pilot scale in an industrial oil mill. The application of a PEF treatment (2 kV/cm; 11.25 kJ/kg) to the olive paste significantly increased the extraction yield by 13.3%, with respect to a control. Furthermore, olive oil obtained by PEF showed total phenolic content, total phytosterols and total tocopherols significantly higher than control (11.5%, 9.9% and 15.0%, respectively). The use of PEF had no negative effects on general chemical and sensory characteristics of the olive oil, maintaining the highest quality according to EU legal standards (EVOO; extra virgin olive oil). Therefore, PEF could be an appropriate technology to improve olive oil yield and produce EVOO enriched in human-health-related compounds, such as polyphenols, phytosterols and tocopherols. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Methodology and some results of the multifaceted evaluation of ecological risk of maintenance of oil and gas fields

    Energy Technology Data Exchange (ETDEWEB)

    Vozuesensky, E.A. [Department of Engineering and Environmental Geology, Moscow State University (Russian Federation); Samarin, E.N. [Ditto (Russian Federation); Voznessenskaya, V.V. [A.N. Severtzov Institute of Ecology and Evolution RAS, Moscow (Russian Federation)

    2000-07-01

    An inter-disciplinary methodology to investigate pollution from maintenance of oil and gas fields and to explore potential impact of new ones has been developed and tested at three oil and gas fields in Western Siberia and Mid-Volga region with different duration of exploitation. The investigations focused on the impact of oil, its derivatives and other chemicals on human health and biocenoses. The research included combination of methods of environmental geology, geophysics, bioindication, cytogenetics and analytical chemistry and is based on the idea that reliable control of concentration, regularities of sorption and the complete tracing of oil pollution in the environment from the source of contamination through the soils, ground and surface water, soil biota and via the food chains to small mammals and birds are needed to assess ecological risk. It is anticipated that direct determination of oil and its derivatives concentration in soil and ground water can provide a basis to understand the results of bioindication. The obtained data revealed the main regularities of the pollutants migration in soils and ground waters, the most dangerous sources of their contamination and demonstrated the impact of gas torches on soils, vegetation and soil- dwelling animals using new reliable and independent indices. (orig.)

  2. Microbial diversity and hydrocarbon degrading gene capacity of a crude oil field soil as determined by metagenomics analysis.

    Science.gov (United States)

    Abbasian, Firouz; Palanisami, Thavamani; Megharaj, Mallavarapu; Naidu, Ravi; Lockington, Robin; Ramadass, Kavitha

    2016-05-01

    Soils contaminated with crude oil are rich sources of enzymes suitable for both degradation of hydrocarbons through bioremediation processes and improvement of crude oil during its refining steps. Due to the long term selection, crude oil fields are unique environments for the identification of microorganisms with the ability to produce these enzymes. In this metagenomic study, based on Hiseq Illumina sequencing of samples obtained from a crude oil field and analysis of data on MG-RAST, Actinomycetales (9.8%) were found to be the dominant microorganisms, followed by Rhizobiales (3.3%). Furthermore, several functional genes were found in this study, mostly belong to Actinobacteria (12.35%), which have a role in the metabolism of aliphatic and aromatic hydrocarbons (2.51%), desulfurization (0.03%), element shortage (5.6%), and resistance to heavy metals (1.1%). This information will be useful for assisting in the application of microorganisms in the removal of hydrocarbon contamination and/or for improving the quality of crude oil. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:638-648, 2016.

  3. Modeling petroleum generation and geochemistry of crude oils in Ras Budran field, northern gulf of Suez, Egypt: implications for prospectivity

    Energy Technology Data Exchange (ETDEWEB)

    Younes, M.A. [Geology Dept., Alexandria Univ. (Egypt)

    2005-12-01

    Petroleum generation modeling of the pre-rift succession in Ras Budran Field, which is located in the northern Gulf of Suez province in Egypt, showed that the best oil prone source rocks identified are the carbonate dominated one in the Upper Cretaceous and the Middle Eocene. These source rocks contain type-II kerogen (liptinitic materials) and progressively increase in their peak of oil generation from 0.63 and 0.83 vitrinite reflectance at a depth of about 3000 meters during the early of middle Miocene age and could have charged traps during the intra Rudeis tectonic phase. Crude oil and source rock extract interrelationships display a great similarity in their geologic occurrences and biological marker distributions. The biomarker characteristics indicate a low relative abundance of oleanane index around 5% pristane/phytane ratio<1, higher C{sub 35}/C{sub 34} homohopanes>1 and higher gammacerane indices >30%, suggesting a typical marine organic matter with source rock deposition under reducing conditions, Marginally mature stage of oil generation is indicated by the relatively low sterane isomerization of C{sub 29} {alpha}{alpha}{alpha} 20S/(S+R) and C{sub 29}{alpha}{beta}{beta}/({alpha}{beta}{beta}+{alpha}{alpha}{alpha}) of about 06 and relatively low aromatic sulfur compound rations. Crude oil geochemistry and related source rock potential define genetically related oils which ware generated from marginally mature and organic-rich carbonate source rocks, most probably from the pre-rift Duwi and Thebes formations. The best oil prone for future prospectivity would be oriented west of Ras Budran Field toward the deep marine of the Gulf, where the undiscovered reserves are expected to be accumulated within the pre-rift reservoirs in the footwalls of the normal faulted blocks. (orig.)

  4. Design and Operation of Laboratory Combustion Cell for Air Injection into Light Oil Reservoirs: Potential Application in Sindh Field

    Directory of Open Access Journals (Sweden)

    Abdul Haque Tunio

    2011-01-01

    Full Text Available Historical experimental work on the combustion oil recovery processes consists of both laboratory and field studies. Although field experiments are the ultimate test of any oil recovery process, they are costly, time consuming and difficult to analyze quantitatively. Laboratory CC (Combustion Cell experiments are cost effective and less time consuming, but are subject to scaling and interpretation challenges. Experimental set up has been developed to understand air injection process for improving oil recovery from light oil reservoirs taking into account the sand pack petro physical and fluid properties. Some important design problems; operational criteria and considerations important to interpretation of results are pointed out. To replicate subsurface reservoir conditions or pressure and temperature, experiments up to 6895 KPa, at non-isothermal conditions with 5oC/min ramp-up are performed on unconsolidated cores with reservoir oil samples. Correlations were obtained for low temperature oxidation rate of oil, the fuel deposition rate and the rate of burning fuel as a fuel concentration. Various parameters such as (sand pack, pressure, oil saturation and flow rate/air flux were changed to investigate their impact on reaction and chemical nature of the fuel burned. To determine the importance of distribution and pyrolysis on these reactions, the hydrogen-carbon ratio and m-ratio was calculated. For further confirmation Arrhenius graphs were drawn by assuming 1.0 order of reaction with carbon concentration which is also confirmed.This research will contribute to the overall understanding of air injection process;help to determine the most appropriate

  5. Preliminary Prioritization of California Oil and Gas Fields for Regional Groundwater Monitoring Based on Intensity of Petroleum Resource Development and Proximity to Groundwater Resources

    Science.gov (United States)

    Davis, T. A.; Landon, M. K.; Bennett, G.

    2016-12-01

    The California State Water Resources Control Board is collaborating with the U.S. Geological Survey to implement a Regional Monitoring Program (RMP) to assess where and to what degree groundwater resources may be at risk of contamination from oil and gas development activities including stimulation, well integrity issues, produced water ponds, and underground injection. A key issue in the implementation of the RMP is that the state has 487 onshore oil fields covering 8,785 square kilometers but detailed characterization work can only be done in a few oil fields annually. The first step in the RMP is to prioritize fields using available data that indicate potential risk to groundwater from oil and gas development, including vertical proximity of groundwater and oil/gas resources, density of petroleum and water wells, and volume of water injected in oil fields. This study compiled data for these factors, computed summary metrics for each oil field, analyzed statewide distributions of summary metrics, used those distributions to define relative categories of potential risk for each factor, and combined these into an overall priority ranking. Aggregated results categorized 22% (107 fields) of the total number of onshore oil and gas fields in California as high priority, 23% as moderate priority, and 55% as low priority. On an area-weighted basis, 41% of the fields ranked high, 30% moderate, and 29% low, highlighting that larger fields tend to have higher potential risk because of greater intensity of development, sometimes coupled with closer proximity to groundwater. More than half of the fields ranked as high priority were located in the southern Central Valley or the Los Angeles Basin. The prioritization does not represent an assessment of groundwater risk from oil and gas development; rather, such assessments are planned to follow based on detailed analysis of data from the RMP near the oil fields selected for study in the future.

  6. The Prestige oil spill: bacterial community dynamics during a field biostimulation assay.

    Science.gov (United States)

    Jiménez, Núria; Viñas, Marc; Bayona, Josep M; Albaiges, Joan; Solanas, Anna M

    2007-12-01

    A field bioremediation assay using the oleophilic fertilizer S200 was carried out 12 months after the Prestige heavy fuel-oil spill on a beach on the Cantabrian coast (north Spain). This assay showed that S200-enhanced oil degradation, particularly of high-molecular-weight n-alkanes and alkylated PAHs, suggesting an increase in the microbial bioavailability of these compounds. The bacterial community structure was determined by cultivation-independent analysis of polymerase chain reaction-amplified 16S rDNA by denaturing gradient gel electrophoresis. Bacterial community was mainly composed of alpha-Proteobacteria (Rhodobacteriaceae and Sphingomonadaceae). Representatives of gamma-Proteobacteria (Chromatiales, Moraxellaceae, and Halomonadaceae), Bacteroidetes (Flavobacteriaceae), and Actinobacteria group (Nocardiaceae and Corynebacteriaceae) were also found. The addition of the fertilizer led to the appearance of the bacterium Mesonia algae in the early stages, with a narrow range of growth substrates, which has been associated with the common alga Achrosiphonia sonderi. The presence of Mesonia algae may be attributable to the response of the microbial community to the addition of N and P rather than indicating a role in the biodegradation process. The Rhodococcus group appeared in both assay plots, especially at the end of the experiment. It was also found at another site on the Galician coast that had been affected by the same spill. This genus has been associated with the degradation of n-alkanes up to C(36). Taking into account the high content of heavy alkanes in the Prestige fuel, these microorganisms could play a significant role in the degradation of such fuel. A similar bacterial community structure was observed at another site that showed a similar degree of fuel weathering.

  7. Spatial analysis in a Markov random field framework: The case of burning oil wells in Kuwait

    Science.gov (United States)

    Dezzani, Raymond J.; Al-Dousari, Ahmad

    This paper discusses a modeling approach for spatial-temporal prediction of environmental phenomena using classified satellite images. This research was prompted by the analysis of change and landscape redistribution of petroleum residues formed from the residue of the burning oil wells in Kuwait (1991). These surface residues have been termed ``tarcrete'' (El-Baz etal. 1994). The tarcrete forms a thick layer over sand and desert pavement covering a significant portion of south-central Kuwait. The purpose of this study is to develop a method that utilizes satellite images from different time steps to examine the rate-of-change of the oil residue deposits and determine where redistribution is are likely to occur. This problem exhibits general characteristics of environmental diffusion and dispersion phenomena so a theoretical framework for a general solution is sought. The use of a lagged-clique, Markov random field framework and entropy measures is deduced to be an effective solution to satisfy the criteria of determination of time-rate-of-change of the surface deposits and to forecast likely locations of redistribution of dispersed, aggraded residues. The method minimally requires image classification, the determination of time stationarity of classes and the measurement of the level of organization of the state-space information derived from the images. Analysis occurs at levels of both the individual pixels and the system to determine specific states and suites of states in space and time. Convergence of the observed landscape disorder with respect to an analytical maximum provide information on the total dispersion of the residual system.

  8. The economics of disposal methods for North Sea oil and gas fields: A study in comparative advantage

    Energy Technology Data Exchange (ETDEWEB)

    Fishman, D.

    1986-05-01

    One of the major development problems of new North Sea fields is the transportation of oil or gas to a landfall (the disposal method). Oil can be disposed of by offshore loading or by pipeline. While offshore loading may be cheaper, it leads to reduced operational efficiency and may not be permitted by regulatory bodies because of perceived safety or environmental hazards. A dedicated pipeline to shore may be too costly for small- to medium-sized fields, but sharing a pipeline system or tying in to an existing pipeline for a tariff are viable alternatives. The development of gas fields and the production of associated gas from oil fields has been hampered by the lack of pipeline systems for disposal. With no fallback position of offshore loading, gas fields cannot be developed unless there is an economic disposal method by pipeline. When a tariff is negotiated that results in the development of a field, all parties stand to benefit economically. The tariff negotiation would thus be expected to result in a mutually beneficial solution. This paper develops economic models of the disposal alternatives to derive the relative benefit of each with respect to the cost-of-disposal, tariff-structure, and reserve-throughput parameters.

  9. Pembina Cardium Field. Enhanced oil recovery economics. Proposed revisions to existing EOR incentives for low productivity reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    O' Keefe, J.J.; Howes, B.J.

    1985-07-01

    Technical analysis of miscibly flooding selected parts of the Pembina Cardium reservoir in Alberta indicates that substantial amounts of additional oil can be recovered, using a hydrocarbon solvent, from areas where little or no conglomerate zone is present. This represents approximately one-half of the total pool. Previous evaluations of the proposed miscible flood projects in the Pembina Cardium Field showed that a substantial enhanced oil recovery potential exists but that such projects were only marinally economic under the conditions that existed at the time. Subsequent to these evaluations, a number of significant changes have occurred. The Western Accord phased-out the Petroleum and Gas Revenue Tax and decontrolled the price of oil, world market forces have reduced oil prices, costs have declined, and a new royalty schedule has been introduced. This report analyzes the Pembina miscible flood economics in light of these changes. The combined effect of the changes is a slight improvement in project economics, which, however, remain marginal. Modifications to the existing Section 4.2 Royalty Deduction and to the earned depletion deduction are proposed with the goal of creating an economic environment that will allow the development of the Pembina Cardium enhanced oil recovery potential. The two projects evaluated in this report represent only a very small portion of the field, 8.3 km/sup 2/ out of field total of 1900 km/sup 2/. If economic considerations permitted the expansion of miscible flooding into the 50% of the Pembina Cardium reservoir considered to be amenable to the current miscible flood design, a very important contribution to oil supplies and economic activity in Canada would result. 6 figs., 26 tabs.

  10. Class III Mid-Term Project, "Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies"

    Energy Technology Data Exchange (ETDEWEB)

    Scott Hara

    2007-03-31

    The overall objective of this project was to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involved improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective has been to transfer technology that can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The first budget period addressed several producibility problems in the Tar II-A and Tar V thermal recovery operations that are common in SBC reservoirs. A few of the advanced technologies developed include a three-dimensional (3-D) deterministic geologic model, a 3-D deterministic thermal reservoir simulation model to aid in reservoir management and subsequent post-steamflood development work, and a detailed study on the geochemical interactions between the steam and the formation rocks and fluids. State of the art operational work included drilling and performing a pilot steam injection and production project via four new horizontal wells (2 producers and 2 injectors), implementing a hot water alternating steam (WAS) drive pilot in the existing steamflood area to improve thermal efficiency, installing a 2400-foot insulated, subsurface harbor channel crossing to supply steam to an island location, testing a novel alkaline steam completion technique to control well sanding problems, and starting on an advanced reservoir management system through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation. The second budget period phase (BP2) continued to implement state-of-the-art operational work to optimize thermal recovery processes, improve well drilling and completion practices, and evaluate the

  11. Hydrocarbon degassing of the earth and origin of oil-gas fields (isotope-geochemical and geodynamic aspects)

    Science.gov (United States)

    Valyaev, Boris; Dremin, Ivan

    2016-04-01

    More than half a century ago, Academician PN Kropotkin substantiated the relationship of the formation and distribution of oil and gas fields with the processes of emanation hydrocarbon degassing of the Earth. Over the years, the concept of PN Kropotkin received further development and recognition of studies based on new factual material. Of particular importance are the following factors: a) the results of studies on global and regional uneven processes of traditional oil and gas and the role of deep faults in controlling the spread of oil and gas fields; b) the results of the research on gigantic volumes and localization of the discharges of hydrocarbon fluids (mud volcanoes, seeps) on land and into the atmosphere and through the bottom of the World ocean; c) the results of the studies on grand volumes of the spread of unconventional hydrocarbon resources in their non-traditional fields, especially on near-surface interval of unconventional oil and gas accumulation with gas hydrates, heavy oil and bitumen, as well as extraordinary resources of oil and gas in the shale and tight rocks. Deep mantle-crust nature of oil and gas in traditional and nontraditional deposits thus received further substantiation of geological and geophysical data and research results. However, isotopic and geochemical data are still interpreted in favor of the concept of the genesis of oil and gas in the processes of thermal catalytic conversion of organic matter of sedimentary rocks, at temperatures up to 200°C. In this report an alternative interpretation of the isotope carbon-hydrogen system (δ13C-δD) for gas and of oil deposits, isotope carbon system for methane and carbon dioxide (δ13C1-δ13C0) will be presented. An alternative interpretation will also be presented for the data on carbon-helium isotope geochemical system for oil and gas fields, volcanoes and mud volcanoes. These constructions agree with the geological data on the nature of deep hydrocarbon fluids involved in the

  12. Improved Oil Recovery from Upper Jurassic Smackover Carbonates through the Application of Advanced Technologies at Womack Hill Oil Field, Choctaw and Clarke Counties, Eastern Gulf Coastal Plain

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2003-12-31

    , multiwell productivity analysis, and reservoir simulation studies indicate that water injection continues to provide stable support to maintain production from wells in the western unitized area of the field and that the strong water drive present in the eastern area of the field is adequate to sustain production from this part of the field. Although the results from the microbial characterization and microbial core experiments are very promising, it is recommended that an immobilized enzyme technology project not be implemented in the Womack Hill Field Unit until live (freshly taken and properly preserved) cores from the Smackover reservoir in the field are acquired to confirm the microbial core experiments to date. From 3-D geologic modeling, reservoir performance analysis, and reservoir simulation, four areas in the Womack Hill Field were identified as prospective infill drilling sites to recover undrained oil from the field. It was determined that the two areas in the unit area probably can be effectively drained by perforating higher zones in the Smackover reservoir in currently producing wells. The two areas in the eastern (non-unitized) part of the field require the drilling of new wells. The successful drilling and testing of a well in 2003 by J. R. Pounds, Inc. has proven the oil potential of the easternmost site in the non-unitized part of the field. Pruet Production Co. acquired new 2-D seismic data to evaluate the oil potential of the westernmost site. Because of the effects of a fault shadow from the major fault bounding the southern border of the Womack Hill Field, it is difficult to evaluate conclusively this potential drill site. Pruet Production Co. has decided not to drill this new well at this time and to further evaluate the new 2-D seismic profiles after these data have been processed using a pre-stack migration technique. Pruet Production Co. has elected not to continue into Phase II of this project because they are not prepared to make a proposal to

  13. Improved Oil Recovery from Upper Jurassic Smackover Carbonates through the Application of Advanced Technologies at Womack Hill Oil Field, Choctaw and Clarke Counties, Eastern Gulf Costal Plain

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2006-05-31

    , multiwell productivity analysis, and reservoir simulation studies indicate that water injection continues to provide stable support to maintain production from wells in the western unitized area of the field and that the strong water drive present in the eastern area of the field is adequate to sustain production from this part of the field. Although the results from the microbial characterization and microbial core experiments are very promising, it is recommended that an immobilized enzyme technology project not be implemented in the Womack Hill Field Unit until live (freshly taken and properly preserved) cores from the Smackover reservoir in the field are acquired to confirm the microbial core experiments to date. From 3-D geologic modeling, reservoir performance analysis, and reservoir simulation, four areas in the Womack Hill Field were identified as prospective infill drilling sites to recover undrained oil from the field. It was determined that the two areas in the unit area probably can be effectively drained by perforating higher zones in the Smackover reservoir in currently producing wells. The two areas in the eastern (non-unitized) part of the field require the drilling of new wells. The successful drilling and testing of a well in 2003 by J. R. Pounds, Inc. has proven the oil potential of the easternmost site in the non-unitized part of the field. Pruet Production Co. acquired new 2-D seismic data to evaluate the oil potential of the westernmost site. Because of the effects of a fault shadow from the major fault bounding the southern border of the Womack Hill Field, it is difficult to evaluate conclusively this potential drill site. Pruet Production Co. has decided not to drill this new well at this time and to further evaluate the new 2-D seismic profiles after these data have been processed using a pre-stack migration technique. Pruet Production Co. has elected not to continue into Phase II of this project because they are not prepared to make a proposal to

  14. Correlations among hydrocarbon microseepage, soil chemistry, and uptake of micronutrients by plants, Bell Creek oil field, Montana

    Science.gov (United States)

    Roeming, S.S.; Donovan, T.J.

    1985-01-01

    Chelate-extractable iron and manganese concentrations in soils over and around the Bell Creek oil field suggest that compared to low average background values, there are moderate amounts of these elements directly over the production area and higher concentrations distributed in an aureole pattern around the periphery of the field. Adsorbed and organically bound iron and manganese appear to be readily taken up by plants resulting in anomalously high levels of these elements in leaves and needles over the oil field and suggesting correlation with corresponding low concentrations in soils. Iron and manganese appear to have bypassed the soil formation process where, under normal oxidizing conditions, they would have ultimately precipitated as insoluble oxides and hydroxides. ?? 1985.

  15. Bioflocculant Produced by Klebsiella sp. MYC and Its Application in the Treatment of Oil-field Produced Water

    Institute of Scientific and Technical Information of China (English)

    YUE Lixi; MA Chunling; CHI Zhenming

    2006-01-01

    Seventy-nine strains of bioflocculant-producing bacteria were isolated from 3 activated sludge samples. Among them, strain MYC was found to have the highest and stable flocculating rate for both kaolin clay suspension and oil-field produced water. The bacterial strain was identified as Klebsiella sp. MYC according to its morphological and biochemical characteristics and 16SrDNA sequence. The optimal medium for bioflocculant production by this bacterial strain was composed of cane sugar 20gL 1, KH2PO4 2gL-1, K2HPO4 5gL-1, (NH4)2SO4 0.2gL-1, urea 0.5gL-1 and yeast extract 0.5gL 1, the initial pH being 5.5. When the suspension of kaolin clay was treated with0.5% of Klebsiella sp. MYC culture broth, the flocculating rate reached more than 90.0 % in the presence of 500 mg L-1 CaCl2, while the flocculating rate for oil-field produced water was near 80.0% in a pH range of 7.0 - 9.0 with the separation of oil and suspended particles from the oil-field produced water under similar conditions. The environm ent-friendly nature of the bioflocculant and high flocculating rate of the strain make the bioflocculant produced by Klebsiella sp. MYC an attractive bioflocculant in oil-field produced water treatment.

  16. Increased Oil Production and Reserves From Improved Completion Techniques in the Bluebell Field, Uinta Basin, Utah

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, C.D.; Deo, M.D.

    1998-04-01

    The Bluebell field is productive from the Tertiary lower Green River and Colton (Wasatch) Formations of the Uinta Basin, Utah. The productive interval consists of thousands of feet of interbedded fractured clastic and carbonate beds deposited in the ancestral Lake Uinta. Wells in the Bluebell field are typically completed by perforating 40 or more beds over 1000 to 3000 vertical ft (300-900 m), then stimulating the entire interval with hydrochloric acid. This technique is often referred to as the shot gun completion. Completion techniques used in the Bluebell field were discussed in detail in the Second Annual Report (Curtice, 1996). The shot-gun technique is believed to leave many potentially productive beds damaged and/or untreated, while allowing water-bearing and low-pressure (thief) zones to communicate with the wellbore. A two-year characterization study involved detailed examination of outcrop, core, well logs, surface and subsurface fractures, produced oil-field waters, engineering parameters of the two demonstration wells, and analysis of past completion techniques and effectiveness. The study was intended to improve the geologic characterization of the producing formations and thereby develop completion techniques specific to the producing beds or facies instead of a shot gun approach to stimulating all the beds. The characterization did not identify predictable-facies or predictable-fracture trends within the vertical stratigraphic column as originally hoped. Advanced logging techniques can identify productive beds in individual wells. A field-demonstration program was developed to use cased-hole advanced logging techniques in two wells and recompletion the wells at two different scales based on the logging. The first well was going to be completed at the interval scale using a multiple stage completion technique (about 500 ft [150 m] per stage). The second well will be recompleted at the bed-scale using bridge plug and packer to isolate three or more

  17. The Prestige oil spill. 2. Enhanced biodegradation of a heavy fuel oil under field conditions by the use of an oleophilic fertilizer.

    Science.gov (United States)

    Jiménez, Núria; Viñas, Marc; Sabaté, Jordi; Díez, Sergi; Bayona, Josep M; Solanas, Anna M; Albaiges, Joan

    2006-04-15

    A field bioremediation assay using the oleophilic fertilizer S200 was carried out 10 months after the Prestige heavy fuel-oil spill on a beach of the Cantabrian coast (North Spain). The field survey showed that S200 significantly enhanced the biodegradation rate, particularly of high molecular weight n-alkanes, alkylcyclohexanes, and benzenes, and alkylated PAHs, paralleling the results previously found in vitro. The most significant molecular bioremediation indicators were the depletion of diasteranes and C-27 sterane components. Enhanced isomeric selectivity was also observed within the C1-phenanthrenes and dibenzothiophenes. Through the analysis of some target aliphatic and aromatic hydrocarbons a number of chemical indicators for assessing the efficiency of field bioremediation as well as identifying the source of highly weathered samples collected in the area after the spill are defined.

  18. D20 Report : Soil Gas surveys in the Weyburn oil field (2001-2003)

    OpenAIRE

    Beaubien, S.; Strutt, M. H.; D. G. Jones; Baubron, J. C.; Cardellini, C.; Lombardi, S.; Quattrochi, F.; Penner, L

    2004-01-01

    The International Energy Agency (IEA) Weyburn project is an international project that is studying the feasibility of long-term geological storage of carbon dioxide (CO2), allied to an enhanced oil recovery operation, by Encana, in the Weyburn oilfield, south-eastern Saskatchewan, Canada. CO2 is being injected into the oil reservoir to improve oil production, whilst at the same time the process should lead to long term geological storage of large volumes of CO2. Soil gas studie...

  19. Is there widespread metal contamination from in-situ bitumen extraction at Cold Lake, Alberta heavy oil field?

    Science.gov (United States)

    Skierszkan, Elliott K; Irvine, Graham; Doyle, James R; Kimpe, Linda E; Blais, Jules M

    2013-03-01

    The extraction of oil sands by in-situ methods in Alberta has expanded dramatically in the past two decades and will soon overtake surface mining as the dominant bitumen production process in the province. While concerns regarding regional metal emissions from oil sand mining and bitumen upgrading have arisen, there is a lack of information on emissions from the in-situ industry alone. Here we show using lake sediment records and regionally-distributed soil samples that in the absence of bitumen upgrading and surface mining, there has been no significant metal (As, Cd, Cu, Hg, Ni, Pb, V) enrichment from the Cold Lake in-situ oil field. Sediment records demonstrate post-industrial Cd, Hg and Pb enrichment beginning in the early Twentieth Century, which has leveled off or declined since the onset of commercial in-situ bitumen production at Cold Lake in 1985.

  20. EVALUATION OF TECHNOLOGICAL SOLUTIONS FOR THE DESIGN AND DEVELOPMENT OF HEAVY OIL AND BITUMEN FIELDS IN NIGERIA

    Directory of Open Access Journals (Sweden)

    Nwizug-bee L. K.

    2016-06-01

    Full Text Available In Nigeria, belt of bituminous sand stretches to the East of Ijebu-Ode (Ogun State in the district of Siluko and Akotogbo, Okitipupa (Ondo Sate and Edo State. It covers a distance of approximately 110 km and lies in the upper cretaceous sequence of the Abeokuta formation in the eastern Dahomey Basin. Reserves of bituminous sand in Nigeria is estimated to be around 30- 40 billion barrels with a possibility to extract 3654 × 106 barrels. From the approximately 30-40 billion barrels of oil sand, Ogun State has more than 40% in reserve. However, this huge stock of oil sand in Nigeria is yet to be exploited. This article provides an assessment of technological solutions for the design and development of tar sand fields in Nigeria. Reserves of oil sand in Nigeria are the biggest in the whole of Africa

  1. Aerobic biodegradation process of petroleum and pathway of main compounds in water flooding well of Dagang oil field.

    Science.gov (United States)

    Cai, Minmin; Yao, Jun; Yang, Huaijun; Wang, Ruixia; Masakorala, Kanaji

    2013-09-01

    Aerobic biodegradation of crude oil and its pathways were investigated via in vitro culture and GC-MS analysis in water flooding wells of Dagang oil field. The in vitro aerobic culture lasted 90 days when 99.0% of n-alkanes and 43.03-99.9% of PAHs were degraded and the biomarkers and their ratios were changed. The spectra of components in the residual oil showed the similar biodegradation between aerobic process of 90 days and degradation in reservoir which may last for some millions years, and the potential of serious aerobic biodegradation of petroleum in reservoir. 24 Metabolites compounds were separated and identified from aerobic culture, including fatty acid, naphthenic acid, aromatic carboxylic acid, unsaturated acid, alcohols, ketones and aldehydes. The pathways of alkanes and aromatics were proposed, which suggests that oxidation of hydrocarbon to organic acid is an important process in the aerobic biodegradation of petroleum. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Activities of the Oil Implementation Task Force, reporting period March--August 1991; Contracts for field projects and supporting research on enhanced oil recovery, reporting period October--December 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    Activities of DOE's Oil Implementation Task Force for the period March--August 1991 are reviewed. Contracts for fields projects and supporting research on enhanced oil recovery are discussed, with a list of related publications given. Enhanced recovery processes covered include chemical flooding, gas displacement, thermal recovery, and microbial recovery.

  3. Organic geochemistry of oils and condensates in the Kekeya field, southwest depression of the Tarim Basin (China)

    Energy Technology Data Exchange (ETDEWEB)

    Maowen Li; Snowdon, L.R. [Geological Survey of Canada, Calgary (Canada); Renzi Lin; Peirong Wang [Jianghan Petroleum Institute, Hubei (China); Yongsheng Liao; Peilong Li [Shengli Petroleum Administrative Bureau, Shandong (China)

    1999-07-01

    This study shows that the oils and condensates in the Kekeya Field in the Tarim Basin, NW China, belong to a single family, most likely derived from marine shale source rocks deposited under oxic-suboxic conditions with mixed terrigenous and algal-bacterial organic inputs. The maturity data clearly indicate that the paraffinic condensates were not formed by thermal cracking of oil during late catagenesis (R{sub o} > 1.2%). Both the oils and condensates were generated within the normal oil window, whereas addition of gaseous hydrocarbons from a separate source resulted in migration fractionation and hence spuriously high heptane indices. Age specific biomarkers show that the oils and condensates were not generated from the Mesozoic-Cenozoic strata, but from the Carboniferous-Permian sections. 1D basin modelling results are consistent with this interpretation, suggesting that the Mesozoic-Eocene strata are currently immature with respect to hydrocarbon generation and expulsion. Deep-seated faults may have provided routes for upward fluid migration at the time of active deformation during several pulses of the Himalayan orogeny. The favoured targets for further petroleum exploration in front of the Kunlun Mountains include the deep structures within the Carboniferous-Permian strata for indigenous petroleum accumulations and anticlines and stratigraphic traps within the Mesozoic-Cenozoic sections that are cut by deep-seated thrust faults where secondary petroleum accumulations most likely occurred. (author)

  4. A Field-Scale Simulation of the Reversible Nanoparticle Adsorption for Enhancing Oil Recovery Using Hydrophilic Nanofluids

    Science.gov (United States)

    Cao, Liyuan

    In order to develop and apply nanotechnology in oil industry, nanoparticles transport in porous media has been studied in the past few years. Theoretical modeling were carried out to evaluate nanoparticle mobility and investigate nanoparticle retention mechanism. In this study, a simulator based on Ju and Fan's mathematical model was used to study nanoparticles transport in porous media on a reservoir scale. The simulator was verified with two simulation software, Eclipse from Schlumberger and MNM1D (Micro- and Nanoparticle transport Model in porous media in 1D geometry) developed by Tosco et al. Different injection scenarios were simulated: continuous injection, slug injection, and postflush. The effect of injection time, injection rate, and slug size on oil recovery were studied. The result discovered that when nanofluids flooding is used after water flooding as tertiary recovery method, early nanofluids injection will lead to higher oil recovery, but with more nanoparticle loss. Higher injection rate of nanofluids could help improve the flooding efficiency, but not the ultimate oil recovery for field development. Also, it can cause more nanoparticle loss. Brine water postflush is recommended when doing nanoflooding. It can significantly improve the recovery of nanoparticles, and for a homogeneous or heterogeneous reservoir, oil recovery is better compared to water flooding.

  5. Modified vegetation indices for Ganoderma disease detection in oil palm from field spectroradiometer data

    Science.gov (United States)

    Shafri, Helmi Z. M.; Anuar, M. Izzuddin; Saripan, M. Iqbal

    2009-10-01

    High resolution field spectroradiometers are important for spectral analysis and mobile inspection of vegetation disease. The biggest challenges in using this technology for automated vegetation disease detection are in spectral signatures pre-processing, band selection and generating reflectance indices to improve the ability of hyperspectral data for early detection of disease. In this paper, new indices for oil palm Ganoderma disease detection were generated using band ratio and different band combination techniques. Unsupervised clustering method was used to cluster the values of each class resultant from each index. The wellness of band combinations was assessed by using Optimum Index Factor (OIF) while cluster validation was executed using Average Silhouette Width (ASW). 11 modified reflectance indices were generated in this study and the indices were ranked according to the values of their ASW. These modified indices were also compared to several existing and new indices. The results showed that the combination of spectral values at 610.5nm and 738nm was the best for clustering the three classes of infection levels in the determination of the best spectral index for early detection of Ganoderma disease.

  6. Nonlinear approach for oil field optimization based on gas lift optimization

    Energy Technology Data Exchange (ETDEWEB)

    Khamehchi, Ehsan; Rashidi, Fariborz [Amirkabir Univ. of Technology, Tehran (Iran). Faculty of Chemical Engineering; Karimi, Behrooz [Amirkabir Univ. of Technology, Tehran (Iran). Faculty of Industrial Engineering; Pourafshary, Peyman [Tehran Univ. (Iran). Petroleum Engineering Inst.

    2009-12-15

    When the initial energy of a virgin reservoir is not sufficient or when this energy falls below a certain limit after a production history, the production rates won't be able to meet economic margins. It is then time for artificial lift methods to come to aid. Among which, gas lift is the most commonly used scenario. Being somehow an ancient tool with an age of over a century, gas lift is though still a challenging problem when overall optimization is the concern. When the injection gas is of limited supply the problem is finding the best gas allocation scheme. However there are ever more cases emerging in certain geographic localities where the gas supplies are usually unlimited. The optimization problem then totally relates to the wellbore and completion string and fully engages with multiphase flow concepts. In the present study an intelligent genetic algorithm has been developed to simultaneously optimize all role playing factors, namely gas injection rate, injection depth and tubing diameter towards the maximum oil production rate with the water cut and injection pressure as the restrictions. The computations and real field data are mutually compared. (orig.)

  7. Characteristics of Chang 21 Low Permeability Sandstone Reservoir in Shunning Oil Field

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-min; YU Liu-ying

    2006-01-01

    Characteristics of Chang 21 low permeability sandstone reservoir of Shunning oil field are analyzed and evaluated based on the data of well logging and experiment. The result shows that 1) the Chang 21 low permeability reservoir belongs to the classification of middle-to-fine sized feldspar sandstone, with its components being low in maturity, deposited in distributary rivers in the front of the delta; 2) the reservoir is obviously dominated by a low or a very low permeability with a linear variation tendency different from that of the ultra-low permeability reservoir; 3) the spatial variation in lithology and physical properties of the reservoir are controlled by the sedimentary facies zones, and 4)the physical property of the reservoir is significantly influenced by clastic constituents and their structure, and the constituent of cement materials and their content. The result also shows that the diagenesis action of the reservoir is quite strong in which dissolution greatly modified the reservoir In addition, the inter-granular dissolved pores are the mainly developed ones and the micro-structure is dominated by the combination of middle-to-large sized pores with fine-to-coarse throats. Finally, the radius of the throats is in good exponential correlation with permeability and the seepage capacity comes from those large sized throats.

  8. Recovery of Aliphatic Hydrocarbons from Oil Field Sludge using Bacillus sp

    Directory of Open Access Journals (Sweden)

    Rizwan Ahmed Bhutto

    2015-04-01

    Full Text Available Bioremediation of aliphatic HC (Hydrocarbons in the oily sludge of Kunnar oil and gas field, Pakistan was attempted by means of previously isolated and developed Bacillus sp. Both autoclaved and non-autoclaved sludge samples were analyzed for a reaction time of 30 days with pH 7 and temperature of 380C in 50 ml MSM growth media for the sludge concentration of 5, 10 and 50% with 2, 4 and 6ml of Bacillus sp. relatively, in air atmosphere. Stabilization of the samples by microbial activity resulted in the decrease in TPH (Total Petroleum Hydrocarbon concentration by 60, 69 and 87% in autoclaved samples in contrast to the decrease of 70, 84 and 94% observed in non-autoclaved samples, relatively. Hydrocarbon degradation in oily sludge was investigated via GC which transpired that 97 and 99% concentration of aliphatic hydrocarbons in autoclaved and non-autoclaved samples was removed at 5% of TPH concentration, relatively. However, with 10% TPH concentration aliphatic hydrocarbons reduction was 68% in autoclaved samples to that of 87% in non-autoclaved samples. Further increase in the hydrocarbons concentration by 50% yielded in the removal of aliphatic hydrocarbons by 65% in autoclaved samples as compared to 98% decrease in non-autoclaved samples.

  9. Geochemical haloes as an indication of over oil and gas fields in the Arctic shelf

    Science.gov (United States)

    Kholmiansky, Mikhail; Anokhin, Vladimir

    2013-04-01

    Hydrocarbon deposits at the Arctic shelf of Russia are a source of jet dispersion of heavy metals that forms haloes in sediments and in the bottom layer of sea water. The intensity of the haloes and their spatial position are jointly determined by geological structure of their source and the environment, i.e., hydrocarbon deposits in host rocks, seafloor lithodynamics and oceanographic factors. Based on theoretical works of Kholmyansky and Putikov (2000; 2006; 2008), an application of electrochemical modification of electric prospecting for offshore hydrocarbon exploration and detailed survey of the morphology of deposits was developed. Specialized equipment was developed for studies of electrochemical features of bottom water layer. With this equipment one can detect ion anomalies in water and determine the type of deposit as gas, gas hydrate, gas condensate or oil. At operation, the unit with equipment is towed underwater off the stern of research vessel. Type and configuration of deposits are determined based on occurrence of trace heavy metals detected by ion-selective electrodes. The proposed method was applied to study a few hydrocarbon fields in Barents and Kara seas in 2001 -2012 including Shtokman, Medyn, Polyarnoe, Prirazlomnoye and others. The results allowed us to trace the margins of the deposits in more detail, and geochemical data, in addition, showed the type of deposits. In general, the method has proven efficient and applicable to a wide range of hydrocarbon deposits.

  10. Sidetrack and recompletion risks in oil fields. 2. Economics of sidetrack development

    Energy Technology Data Exchange (ETDEWEB)

    Lerche, I. [University of South Carolina Columbia, S.C. (United States). Department of Geological Sciences; Noeth, S. [Texas A and M University, College Station, Texas (United States). Department of Geology and Geophysics

    2001-07-01

    The worth of undertaking a sidetrack well for an already producing field is examined in terms of the chances the sidetrack will fail and also the chances the sidetrack, even if successful, will kill already producing wells. The decision to proceed with such a sidetrack is shown to be sensitive to the residual producible reserves, the costs of the sidetrack, and its costs per bbl of oil relative to the costs through already producing wells and to the total cash flow to date. In addition, the types of uncertainty ascribed to the future estimates made for production influence the decision, as do the ranges of uncertainty for unknown components, such as the chances of a successful sidetrack and the chances of killing producing wells. Simple numerical illustrations are provided to show how such uncertainties can be used to assess the inherent risk, and also to show how corporate mandates of minimum acceptable chance of success constrain the needed net value for the sidetrack situation. The general problem, with all parameters included, can be set up as a simple Excel spreadsheet calculation, so that recourse to massive computing power is not needed. In this way, and with the help of superposed Crystal Ball types of programs for assessing the influence of parameter value ranges and distribution types, one can quickly find out which parameters need to be better constrained to improve the assessment of whether a sidetrack is preferable to not undertaking such a development. (author)

  11. Performance of EDAB-HCl Acid Blended System as Fracturing Fluids in Oil Fields

    Institute of Scientific and Technical Information of China (English)

    赵增迎; 吕国诚; 张以河; 连胜江; 田娜

    2014-01-01

    Due to the high price and formation damage of the guargum fracturing fluid, many oilfields are more and more interested in surfactant based fracturing fluids. The rheological properties of erucicamide dimethyl ami-dopropyl betaine (EDAB)-HCl acid blended system and its suitability as fracturing fluid were investigated in this work. The effects of pH, concentration of EDAB, and temperature on the rheological properties of the blended sys-tem were studied. The results show that addition of EDAB improved the viscosity of the system from less than 10 mPa·s to about 400 mPa·s, which could retard the acid-rock reaction to about one half at 60 °C and one quarter at 90 °C comparing to straight HCl acid, suggesting that there is sufficient time for the blended fluid to react with for-mation rock when it is used as fracturing fluid in an oil field. Core flow tests demonstrated that the EDAB-acid blended fluid could divert itself from high permeability formation core to low permeability one, thus ensuring proper acid placement in the target reservoirs.

  12. Light-mediated self-organization of sunflower stands increases oil yield in the field.

    Science.gov (United States)

    López Pereira, Mónica; Sadras, Victor O; Batista, William; Casal, Jorge J; Hall, Antonio J

    2017-07-25

    Here, we show a unique crop response to intraspecific interference, whereby neighboring sunflower plants in a row avoid each other by growing toward a more favorable light environment and collectively increase production per unit land area. In high-density stands, a given plant inclined toward one side of the interrow space, and the immediate neighbors inclined in the opposite direction. This process started early as an incipient inclination of pioneer plants, and the arrangement propagated gradually as a "wave" of alternate inclination that persisted until maturity. Measurements and experimental manipulation of light spectral composition indicate that these responses are mediated by changes in the red/far-red ratio of the light, which is perceived by phytochrome. Cellular automata simulations reproduced the patterns of stem inclination in field experiments, supporting the proposition of self-organization of stand structure. Under high crop population densities (10 and 14 plants per m(2)), as yet unachievable in commercial farms with current hybrids due to lodging and diseases, self-organized crops yielded between 19 and 47% more oil than crops forced to remain erect.

  13. Present status and trend of oil/gas field exploration technology in polar region. Part 6

    Energy Technology Data Exchange (ETDEWEB)

    Saka, Koji

    1988-10-01

    The supporting system necessary for the oil/gas field exploration in the polar region includes the transportation of material/equipment between the support base and production site, maintenance/repair of exploration/production equipment, salvage and other systems. For the transportation, ice breakers, supply boats, trucks, helicopters and aircrafts are used. To heighten the ice breaker in ice breaking capacity, there is progress in bow shape, paint coating and power source, of which the main feature is the adoption of spoon shaped bow and diesel or turbine engine. For the transportation of personnel and material/equipment, the aircraft, and long flight range and high transport capacity helicopter being used, the hovercraft and vertical take-off and landing aircraft will be further introduced in no distant future. Besides, Archimedian screw type amphibian vehicle is in expectation for the various work use, and manned or unmanned submarine boat for the submarine work/maintenance use, diving unit for the submarine maintenance/inspection use and submarine burying unit for the pipeline burying use are developed. 23 figures, 18 tables.

  14. Sea bird observations during an experimental oil spill on the Frigg field August 1995; Observasjoner av sjoefugl i forbindelse med eksperimentelt oljeutslipp - Friggfeltet august 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lorentsen, S.H.

    1995-10-01

    During an experimental oil spill on the Frigg field in August 1995 the distribution and number of sea birds was mapped prior to the release of the first oil spill. As discussed in this report, behavioural studies were carried out to estimate the number of sea birds harmed in a real oil spill. There were three spills of 15 m{sup 3} each and two spills of 25 m{sup 3} each, of clean oil. Very few birds were observed to have oil damage. The usefulness of this type of exercise for vulnerability studies is discussed. It is concluded that experimental as well as real oil spill situations should be utilized to collect information on the behavioural reaction of sea birds to drifting oil spills. 14 refs., 3 figs., 4 tabs.

  15. Geological emission of methane from the Yakela condensed oil/gas field in Talimu Basin, Xinjiang, China

    Institute of Scientific and Technical Information of China (English)

    TANG Junhong; BAO Zhengyu; XIANG Wu; GOU Qinghong

    2008-01-01

    A static flux chamber method was applied to study natural emissions of methane into the atmosphere in the Yakela condensed oil/gas field in Talimu Basin, Xinjiang, China. Using an online method, which couples a gas chromatography/high-temperature conversion/isotope ratio mass spectrometry (GC/C/MS) together, the 13C/12C ratios of methane in the flux chambers were measured. The results demonstrated that methane gases were liable to migrate from deep oil/gas reservoir to the surface through microseepage and pervasion, and that a part of the migrated methane that remained unoxidized could emit into the atmosphere. Methane emission rates varied less in the oil/gas field because the whole region was homogeneous in geology and geography, with a standard deviation of less than 0.02 mg/(m2·h). These were the differences in methane emission flux in the day and at night in the oil/gas field. The maximum methane emission flux reached 0.15 mg/(m2·h) at 5:00-6:00 early in the morning, and then decreased gradually. The minimum was shown 0.10 mg/(m2·h) at 17:00-18:00 in the afternoon, and then increased gradually. The daily methane released flux of the study area was 2.89 mg/(m2·d), with a standard deviation of 0.43 mg/(m2·d), using the average methane flux of every hour in a day for all chambers. δ13C of methane increased with the increase of methane concentration in the flux chambers, further indicating that the pyrogenetic origin of methane was come from deep oil/gas reservoirs.

  16. Environmental Management System of Petroleum Industries: A case study of Oil and Gas Exploration in the Zamrud Field Conservation Areas

    Directory of Open Access Journals (Sweden)

    Onny Setiani

    2015-12-01

    Full Text Available ABSTRACT Background:The Zamrud Field is one of the oil fields managed by Caltex Pacific Indonesia (CPI a production sharing contractor of Pertamina. It is located in the Coastal Plain and  Pekanbaru (CPP Block. The government of Indonesia has designated Zamrud as a conservation area. The petroleum industry in Zamrud fields has received 14001 ISO Certificate on Environmental Management System. The production sharing contract between CPI and the Government of Indonesia expired in August 2002 Methods: .This case study describes how CPI managed the development  of oil and gas production and compared to  the environmental management system for  petroleum industries  that should be taken  in the Zamrud conservation areas. Results: A number of specific measures were employed by CPI  to protect this sensitive area including a green seismic project, zero-discharge drilling, water management, preservation of nature and regular monitoring and impact assessment. There are two  important points that should be in consideration  for the environmental management system by CPI in the Zamrud areas, including top soil utilization to maintain biological and nutrients quality and re-vegetation in all areas of significant disturbances. Conclusion: oil and gas  exploration and production in conservation areas has to be managed through high commitment to good environmental  and social practices. Key words     : Environmental Management System (EMS, Petroleum Industries, Zamrud Field

  17. Costs for off-site disposal of nonhazardous oil field wastes: Salt caverns versus other disposal methods

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J.A.

    1997-09-01

    According to an American Petroleum Institute production waste survey reported on by P.G. Wakim in 1987 and 1988, the exploration and production segment of the US oil and gas industry generated more than 360 million barrels (bbl) of drilling wastes, more than 20 billion bbl of produced water, and nearly 12 million bbl of associated wastes in 1985. Current exploration and production activities are believed to be generating comparable quantities of these oil field wastes. Wakim estimates that 28% of drilling wastes, less than 2% of produced water, and 52% of associated wastes are disposed of in off-site commercial facilities. In recent years, interest in disposing of oil field wastes in solution-mined salt caverns has been growing. This report provides information on the availability of commercial disposal companies in oil-and gas-producing states, the treatment and disposal methods they employ, and the amounts they charge. It also compares cavern disposal costs with the costs of other forms of waste disposal.

  18. Test methodology for elemental sulfur resistant advanced materials for oil and gas field equipment

    Energy Technology Data Exchange (ETDEWEB)

    Steinbeck, G. [Verein Deutscher Eisenhuettenleute, Duesseldorf (Germany); Bruckhoff, W. [BEB Erdgas und Erdoel GmbH, Hannover (Germany); Koehler, M. [Krupp-VDM AG, Werdohl (Germany); Schlerkmann, H. [Mannesmann Forschungsinstitut, Duisburg (Germany); Schmitt, G. [Iserlohn Polytechnic (Germany). Lab. for Corrosion Protection

    1995-10-01

    The great variety of methodologies for testing the performance of advanced materials for resistance to elemental sulfur in oil and gas industry prompted the Technical Committee for Corrosion of the German Iron and Steel Institute (VDEh) to define recommended test procedures. These procedures have already found wide acceptance in the German materials and oil and gas industry.

  19. 米糠毛油掺伪食用植物油的低场核磁共振检测%Discrimination of Edible Vegetable Oil Adulterated with Rice Bran Crude Oil by Low-field Nuclear Magnetic Resonance

    Institute of Scientific and Technical Information of China (English)

    周凝; 刘宝林; 王欣; 汪宏志; 杨培强; 周航

    2011-01-01

    应用低场核磁共振方法分别测定了米糠毛油和3种食用植物油(花生油、橄榄油和葵花籽油)的弛豫图谱,发现在10 ms左右米糠毛油弛豫图谱中出现了-明显特征峰,而其他3种纯油品均未检出,且随着米糠毛油掺入量的增多,该峰面积的比例也随之增大.结果表明,通过测定该特征峰面积比例可定量测出米糠毛油掺伪量.%The relaxation maps of three edible vegetable oils (peanut oil, sunflower seed oil and sunflower seed oil) and rice bran crude oil were detected by low - field nuclear magnetic resonance technology (NMR). An obvious characteristic peak has been determined in the relaxation maps of rice bran crude oil at 10ms, which can not be detected in the other three kinds of pure edible oil. And the area proportion increased with the increase of rice bran crude oil content. Therefore, the detecting of the characteristic peak area can judge the vegetable oil adulterated with rice bran crude oil.

  20. Effects of oil pollution at Kuwait's Greater Al-Burgan oil field on the timing of morning emergence, basking and foraging behaviors by the sand lizard Acanthodactylus scutellatus.

    Science.gov (United States)

    Al-Hashem, M Abdulla; Brain, P F; Omar, S Ahmad

    2008-02-15

    An attempt was made to study the effects of oil pollution in a desert location (the Greater Al-Burgan oil fields, an area damaged in the second Gulf War) in Kuwait on the behaviour of the Sand lizard A. scutellatus. Polluted sites with apparently different degrees of contamination (namely tar mat, soot and clear sites) were compared with control areas outside this region. Between 2002 and 2003, ten lizards (5 of each sex) on each polluted and each control site were observed in the field at a time of the year when they were highly active. Air, substrate and burrow temperatures were recorded and lizards were monitored for their morning emergence times, as well as their basking and foraging activities. The present study confirmed that the morning emergence times and the basking behavior varied in sand lizards among the different pollution site categories. Physical changes in the tar mat sites caused the substrate temperatures in these locations to rise more quickly in the morning in response to solar gain than was the case in the other sites. This gives lizards in these locations the opportunity to emerge earlier and to start eating more quickly, giving them an energetic advantage (perhaps, in turn, influencing their rates of growth and fecundity). The clear sites had the next earliest emergence and were the next hottest but it is difficult to account for this in terms of the physical characteristics of this site. The basking times were clearly shorter on the dark soot and tar mat sites that appeared to have higher solar gain than control or clear sites. There did not appear to be any obvious differences in foraging activity of lizards in the different locations. It appears that some aspects of simple behaviour in these lizards provides a reliable, noninvasive indices for assessing oil pollution in desert locations. The precise impact of these changes in these reptiles on their long-term viability needs to be evaluated.

  1. The influence of bioaugmentation and biosurfactant addition on bioremediation efficiency of diesel-oil contaminated soil: feasibility during field studies.

    Science.gov (United States)

    Szulc, Alicja; Ambrożewicz, Damian; Sydow, Mateusz; Ławniczak, Łukasz; Piotrowska-Cyplik, Agnieszka; Marecik, Roman; Chrzanowski, Łukasz

    2014-01-01

    The study focused on assessing the influence of bioaugmentation and addition of rhamnolipids on diesel oil biodegradation efficiency during field studies. Initial laboratory studies (measurement of emitted CO2 and dehydrogenase activity) were carried out in order to select the consortium for bioaugmentation as well as to evaluate the most appropriate concentration of rhamnolipids. The selected consortium consisted of following bacterial taxa: Aeromonas hydrophila, Alcaligenes xylosoxidans, Gordonia sp., Pseudomonas fluorescens, Pseudomonas putida, Rhodococcus equi, Stenotrophomonas maltophilia, Xanthomonas sp. It was established that the application of rhamnolipids at 150 mg/kg of soil was most appropriate in terms of dehydrogenase activity. Based on the obtained results, four treatment methods were designed and tested during 365 days of field studies: I) natural attenuation; II) addition of rhamnolipids; III) bioaugmentation; IV) bioaugmentation and addition of rhamnolipids. It was observed that bioaugmentation contributed to the highest diesel oil biodegradation efficiency, whereas the addition of rhamnolipids did not notably influence the treatment process.

  2. Computer technology of quantitative interwell correlation of sediments on the oil and gas fields in the CIS countries

    Energy Technology Data Exchange (ETDEWEB)

    Barinova, O.I.; Kalinina, E.E.; Ovtchinnikova, M.I. (Oil and Gas Research Institute of the Russian Academy of Sciences, Moscow (Russian Federation))

    1993-09-01

    In the course of studies of the oil and gas fields of the former USSR (including Romashkinskoye, Western Uzbekistan, Orenburg, Odoptu-more, and Karachaganak), methods have been developed to subdivide the rock sequences into sedimentation cycles and subcyles, and to identify washouts and breaks in the section. An IBM-PC program (MSLA) has been developed that enables subdivision and correlation of the well section to be made according to the multilevel hierarchy model of sequences devised by Guberman. With the help of the MSLA program, this model can be applied to well-correlation problems where there are no preliminary data available such as geological markers, cores, or ditch samples. The technique has been used in studies of the structure of oil and gas fields involving computer models and as an [open quotes]expert[close quotes] system.

  3. Regulation of mature oil fields: a constitutional analysis; Regulacao de campos maduros de petroleo: uma analise a luz da Constituicao Federal de 1988

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Mariana de; Xavier, Yanko Marcius de Alencar [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The oil activities in Brazil had been started in an intensive way by the years 30 and 40. During approximately 40 years only one agent had been executed the oil activities in this country: the PETROBRAS. Many of the fields explored in the past are nowadays in decline. These fields, not interesting for the majors, would be interesting for the small and medium enterprises. The present research analyses the mature oil fields and its regulation in Brazil, looking to the 'Constituicao Federal de 1988' and to the idea of social and economic development. (author)

  4. Applications of advanced petroleum production technology and water alternating gas injection for enhanced oil recovery: Mattoon Oil Field, Illinois. Third quarterly report, [July--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Baroni, M.R.

    1993-12-21

    The objectives of this project are to continue reservoir characterization of the Cypress Sandstone; to identify and map facies-defined waterflood units (FDWS); and to design and implement water-alternating-gas (WAG) oil recovery utilizing carbon dioxide (CO{sub 2}) The producibility problems are permeability variation and poor sweep efficiency. Part 1 of the project focuses on the development of computer-generated geological and reservoir simulation models that will be used to select sites for the demonstration and implementation of CO{sub 2} displacement programs in Part 2. Included in Part 1 is the site selection and drilling of an infill well, coring of the Cypress interval, and injectivity testing to gather information used to update the reservoir simulation model. Part 2 involves field implementation of WAG. Technology Transfer includes outreach activity such as seminars, workshops, and field trips.

  5. Applications of advanced petroleum production technology and water alternating gas injection for enhanced oil recovery: Mattoon Oil Field, Illinois. Fourth quarterly report, [October 1, 1993--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Baroni, M.

    1994-01-25

    The objectives of this project are to continue reservoir characterization of the Cypress Sandstone; to identify and map fades-defined waterflood units (FDWS); and to design and Implement water-alternating-gas (WAG) oil recovery utilizing carbon dioxide (CO{sub 2}). The producibility problems are permeability variation and poor sweep efficiency. Phase 1 of the project focuses on the development of computer-generated geological and reservoir simulation models that will be used to select sites for the demonstration and implementation of CO{sub 2} displacement programs in Phase 2. Included in Phase 1 is the site selection and drilling of an infill well, coring of the Cypress interval, and injectivity testing to gather information used to update the reservoir simulation model. Phase 2 involves field implementation of WAG. Technology Transfer includes outreach activity such as seminars, workshops, and field trips. Technical progress for this quarter is described.

  6. Applications of advanced petroleum production technology and water alternating gas injection for enhanced oil recovery: Mattoon Oil Field, Illinois. [Quarterly report], January--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Baroni, M.R.

    1994-04-30

    The objectives of this project are to continue reservoir characterization of the Cypress Sandstone; to identify and map facies-defined waterflood units (FDWS); and to design and implement water-alternating-gas (WAG) oil recovery utilizing carbon dioxide (CO{sub 2}). The producibility problems are permeability variation and poor sweep efficiency. Phase 1 of the project focuses on the development of computer-generated geological and reservoir simulation models that will be used to select sites for the demonstration and implementation of CO{sub 2} displacement programs in Phase 2. Included in Phase 1 is the site selection and drilling of an infill well, coring of the Cypress internal and injectivity testing to gather information used to update the reservoir simulation model. Phase 2 involves field implementation of WAG. Technology Transfer includes outreach activity such as seminars, workshops, and field trips. Accomplishments for the past quarter are described.

  7. A model of basement structure from magnetic anomalies of the Bombay High oil-field west of India

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, D.G.

    -122 111 Elsevier Science Publishers B.V., Amsterdam A model of basement structure from magnetic anomalies of the Bombay High Oil-Field west of India D. Gopala Rao National Institute of Oceanography, Dona Paula, Goa 403 004, India (Revision accepted....5 kin LOWER MIOCENE LIMESTONE REFLECTOR (FROM SEISMIC DATA) ~',r V,,- v • - ~'¥¥YYYVV . ..... \\[~~'vvwvwyvvvvWvvvv " ":" ":'wv ..... I"'T .... L CLAY/CLAYSTONE ~ OBSERVED MAGNETIC ANOMALIES SHALE ~ THEORETICAL MAOHETIC ANOMALIES LIMESTONE...

  8. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 86, quarter ending March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    Summaries are presented for 37 enhanced oil recovery contracts being supported by the Department of Energy. The projects are grouped into gas displacement methods, thermal recovery methods, geoscience technology, reservoir characterization, and field demonstrations in high-priority reservoir classes. Each summary includes the objectives of the project and a summary of the technical progress, as well as information on contract dates, size of award, principal investigator, and company or facility doing the research.

  9. Petrophysical evaluation of the hydrocarbon potential of the Lower Cretaceous Kharita clastics, North Qarun oil field, Western Desert, Egypt

    Science.gov (United States)

    Teama, Mostafa A.; Nabawy, Bassem S.

    2016-09-01

    Based on the available well log data of six wells chosen in the North Qarun oil field in the Western Desert of Egypt, the petrophysical evaluation for the Lower Cretaceous Kharita Formation was accomplished. The lithology of Kharita Formation was analyzed using the neutron porosity-density and the neutron porosity-gamma ray crossplots as well as the litho-saturation plot. The petrophysical parameters, include shale volume, effective porosity, water saturation and hydrocarbon pore volume, were determined and traced laterally in the studied field through the iso-parametric maps. The lithology crossplots of the studied wells show that the sandstone is the main lithology of the Kharita Formation intercalated with some calcareous shale. The cutoff values of shale volume, porosity and water saturation for the productive hydrocarbon pay zones are defined to be 40%, 10% and 50%, respectively, which were determined, based on the applied crossplots approach and their limits. The iso-parametric contour maps for the average reservoir parameters; such as net-pay thickness, average porosity, shale volume, water saturation and the hydrocarbon pore volume were illustrated. From the present study, it is found that the Kharita Formation in the North Qarun oil field has promising reservoir characteristics, particularly in the northwestern part of the study area, which is considered as a prospective area for oil accumulation.

  10. Investigation of Diospyros Kaki L.f husk extracts as corrosion inhibitors and bactericide in oil field.

    Science.gov (United States)

    Zhang, Jie; Song, Yingpan; Su, Huijun; Zhang, Li; Chen, Gang; Zhao, Jingrui

    2013-07-01

    Hydrochloric acid is used in oil-well acidizing commonly for improving the crude oil production of the low-permeable reservoirs, while it is a great challenge for the metal instruments involved in the acidification. Developing natural products as oilfield chemicals is a straight way to find less expensive, green and eco-friendly materials. The great plant resources in Qin-ling and Ba-shan Mountain Area of Shannxi Province enable the investigating of new green oil field chemicals. Diospyros Kaki L.f (persimmon), a famous fruit tree is widely planted in Qin-ling and Ba-shan Mountain Area of Shaanxi Province. It has been found that the crude persimmon extracts are complex mixtures containing vitamins, p-coumaric acid, gallic acid, catechin, flavonoids, carotenoids and condensed tannin and so on, which indicates the extracts of persimmon husk suitable to be used as green and eco-friendly corrosion inhibitors. Extracts of persimmon husk were investigated, by using weight loss and potentiodynamic polarisation techniques, as green and eco-friendly corrosion inhibitors of Q235A steel in 1M HCl. The inhibition efficiency of the extracts varied with extract concentration from 10 to 1,000 mg/L. There are some synergistic effects between the extracts and KI, KSCN and HMTA. Potentiodynamic polarization studies indicate that extracts are mixed-type inhibitors. Besides, the extracts were screened for antibacterial activity against oil field microorganisms, and they showed good to moderate activity against SRB, IB and TGB. The inhibition efficiency of the extracts varied with extract concentration from 10 to 1,000 mg/L, and the highest reaches to 65.1% with the con concentration of 1,000 mg/L WE. KI, KSCN and HMTA they can enhance the IE of WE effectively to 97.3% at most, but not effective for KI and KSCN to AE. Tafel polarisation measurements indicate the extracts behave as mixed type inhibitor. Investigation of the antibacterial activity against oil field microorganism showed

  11. Nonisothermic filtering in working oil fields. Neizotermicheskaya fil'tratsiya pri razrabotke neftyanykh mestorozhdeniy

    Energy Technology Data Exchange (ETDEWEB)

    Alishayev, M.G.; Rozenberg, M.D.; Teslyuk, Ye.V.

    1985-01-01

    A description is made of the effect of water injected in large volumes at low temperature on the development indicators and the oil output coefficient, as well as their dependence on the thermal methods of bed modification. An examination was made of the mechanism for displacing oil from the beds during thermal flooding, temperature mode of the bed beyond the displacement front and in those regions where there is no displacement front. Examples are given of determining the filtering indicators and the technical and technological indicators of working in displacement of oil by water.

  12. Major Fields and Areas to Draw PetroChina's Oil and Gas Exploration Efforts

    Institute of Scientific and Technical Information of China (English)

    Qiu Xinlong

    2001-01-01

    @@ Based on the study released by China's Research Institute of Petroleum Exploration and Development at PetroChina's exploration work conference held recently in Chengdu,Sichuan Province, PetroChina has proven 405 million tons of oil in place between January and September 2001,fulfilling 99 percent of the annual plan.The proven oil in place is estimated to reach 422 million tons by the end of the year. Meanwhile, the controlled oil in place reached 293 million tons,accounting for 84 percent of the annual plan.

  13. Source rock evaluation and organic geochemistry of Belayim Marine Oil Field, Gulf of Suez, Egypt

    Directory of Open Access Journals (Sweden)

    Mohamed Abu Al-Atta

    2014-09-01

    In general, TOC analyses showed that the Nubia-A and B formation sediments are fairly immature compared to good source rocks with very high Hydrogen Index indicative of kerogen type II. The geochemical investigations of two oil samples indicate that the Upper Rudeis oil of Belayim Marine was derived from a marine carbonate rich source, which is relatively rich in algal organic matter and has moderate sulfur content. The maturity of the analyzed oils (about 0.75% R0 falls short from the stage of peak hydrocarbon generation which is known to be reached at about 0.85% R0.

  14. Preparation and fuel properties of field pennycress (Thlaspi arvense) seed oil ethyl esters and blends with ultra-low sulfur diesel fuel

    Science.gov (United States)

    Field pennycress (Thlaspi arvense L.) is a widely distributed winter annual with high seed oil content (36%) and is suitable as an off-season rotational crop in the Midwestern U.S. Erucic [(13Z)-docosenoic] acid (36.2%) is the most abundant constituent in the oil, with unsaturated and very long chai...

  15. Bacterial Community Dynamics and Hydrocarbon Degradation during a Field-Scale Evaluation of Bioremediation on a Mudflat Beach Contaminated with Buried Oil

    OpenAIRE

    Röling, Wilfred F. M.; Milner, Michael G.; Jones, D. Martin; Fratepietro, Francesco; Swannell, Richard P. J.; Daniel, Fabien; Head, Ian M.

    2004-01-01

    A field-scale experiment with a complete randomized block design was performed to study the degradation of buried oil on a shoreline over a period of almost 1 year. The following four treatments were examined in three replicate blocks: two levels of fertilizer treatment of oil-treated plots, one receiving a weekly application of liquid fertilizer and the other treated with a slow-release fertilizer; and two controls, one not treated with oil and the other treated with oil but not with fertili...

  16. Increasing Waterflood Reserves in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, D.; Koerner, R.; Moos D.; Nguyen, J.; Phillips, C.; Tagbor, K.; Walker, S.

    1999-04-05

    This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate.

  17. Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications

    OpenAIRE

    Albina Mukhametshina; Elena Martynova

    2013-01-01

    Viscosity is a major obstacle in the recovery of low API gravity oil resources from heavy oil and bitumen reservoirs. While thermal recovery is usually considered the most effective method for lowering viscosity, for some reservoirs introducing heat with commonly implemented thermal methods is not recommended. For these types of reservoirs, electromagnetic heating is the recommended solution. Electromagnetic heating targets part of the reservoir instead of heating the bulk of the reservoir, w...

  18. 油田用小型脱硫罐设计%Design of Minitype Desulfurization Tank of Oil Field

    Institute of Scientific and Technical Information of China (English)

    毕建成

    2014-01-01

    针对目前我国含硫化氢天然气和高含硫化氢天然气的开采情况,介绍了一种新型油田用小型脱硫罐的设计,对其工作原理、结构及材料进行了阐述。采用该脱硫罐解决了油田分散采油区块天然气硫化氢污染问题,保护了采油区块周边的环境和操作人员的人身安全。%In view of the situation of natural gas in our country natural gas containing hydrogen sulfide and high H2 S content mining ,the design of a kind of new minitype desulfurization tank used in oil fields is introduced ,the working principle ,structure and material are described .The technology is used to solve the oil dispersed oil block natural gas hydrogen sulfide pollution ,and protect the oil block surrounding environment and personal safety of operators .

  19. Process and mechanism for oil and gas accumulation, adjustment and reconstruction in Puguang Gas Field, Northeast Sichuan Basin, China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    With the discoveries of a series of large gas fields in the northeast of Sichuan Basin, such as Puguang and Longgang gas fields, the formation mechanism of the gas reservoir containing high H2S in the ancient marine carbonate formation in superposition-basin becomes a hot topic in the field of petroleum geology. Based on the structure inversion, numerical simulation, and geochemical research, we show at least two intervals of fluid transfer in Puguang paleo-oil reservoir, one in the forepart of late Indo-Chinese epoch to early Yanshan epoch and the other in the metaphase of early Yanshan epoch. Oil and gas accumulation occurred at Puguang structure through Puguang-Dongyuezhai faults and dolomite beds in reef and shoal facies in Changxing Formation (P2ch) - Feixianguan Formation (T1f) in the northwest and southwest directions along three main migration pathways, to form Puguang paleo-oil reservoir. Since crude oil is pyrolysised in the early stage of middle Yanshan epoch, Puguang gas reservoir has experienced fluid adjusting process controlled by tectonic movement and geochemical reconstruction process controlled by thermochemical sulfate reduction (TSR). Middle Yan-shan epoch is the main period during which the Puguang gas reservoir experienced the geochemical reaction of TSR. On one hand, TSR can recreate the fluid in gas reservoir, which makes the gas drying index larger and carbon isotope heavier. On the other hand, the reciprocity between fluid regarding TSR (hydrocarbon, H2S, and water) and reservoir rock induces erosion of the reservoir rocks and anhydrite alteration, which improves reservoir petrophysical properties. Superimposed by later tectonic movement, the fluid in Puguang reservoir has twice experienced adjustment, one in the late Yanshan epoch to the early Himalayan epoch and the other time in late Himalayan epoch, after which Puguang gas reservoir is finally developed.

  20. Hydrocarbons and heavy metals in fine particulates in oil field air: possible impacts on production of natural silk.

    Science.gov (United States)

    Devi, Gitumani; Devi, Arundhuti; Bhattacharyya, Krishna Gopal

    2016-02-01

    Analyses of fine particulates (PM2.5) from the upper Assam oil fields of India indicated considerable presence of higher hydrocarbons (C22-C35) and heavy metals, Cd, Co, Cr, Cu, Ni, Pb, and Zn. This has raised serious concern for the sustainability of the exotic Muga (Antheraea assama) silk production, which has been a prime activity of a large number of people living in the area. The Muga worm feeds on the leaves of Machilus bombycina plant, and the impacts of air quality on its survival were further investigated by analyzing the leaves of the plant, the plantation soil, and the Muga cocoons. PM2.5 content in the air was much more during the winter due to near calm conditions and high humidity. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and gas chromatography-mass spectrometer (GC-MS) analysis of PM2.5 showed the presence of higher alkanes (C22-C35) that could be traced to crude oil. Cr, Ni, and Zn were found in higher concentrations in PM2.5, M. bombycina leaves, and the plantation soil indicating a common origin. The winter has been the best period for production of the silk cocoons, and the unhealthy air during this period is likely to affect the production, which is already reflected in the declining yield of Muga cocoons from the area. SEM and protein analyses of the Muga silk fiber produced in the oil field area have exhibited the deteriorating quality of the silk. This is the first report from India on hydrocarbons and associated metals in PM2.5 collected from an oil field and on their possible effects on production of silk by A. assama.

  1. Optimization of Vertical Well Placement for Oil Field Development Based on Basic Reservoir Rock Properties using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Tutuka Ariadji

    2012-07-01

    Full Text Available Comparing the quality of basic reservoir rock properties is a common practice to locate new infills or development wells for optimizing an oil field development using a reservoir simulation. The conventional technique employs a manual trial and error process to find new well locations, which proves to be time-consuming, especially, for a large field. Concerning this practical matter, an alternative in the form of a robust technique was introduced in order that time and efforts could be reduced in finding best new well locations capable of producing the highest oil recovery. The objective of the research was to apply Genetic Algorithm (GA in determining wells locations using reservoir simulation to avoid the manual conventional trial and error method. GA involved the basic rock properties, i.e., porosity, permeability, and oil saturation, of each grid block obtained from a reservoir simulation model, which was applied into a newly generated fitness function formulated through translating the common engineering practice in the reservoir simulation into a mathematical equation and then into a computer program. The maximum of the fitness value indicated a final searching of the best grid location for a new well location. In order to evaluate the performance of the generated GA program, two fields that had different production profile characteristics, namely the X and Y fields, were applied to validate the proposed method. The proposed GA method proved to be a robust and accurate method to find the best new well locations for field development. The key success of this proposed GA method is in the formulation of the objective function.

  2. Increasing heavy oil reservers in the Wilmington oil Field through advanced reservoir characterization and thermal production technologies, technical progress report, October 1, 1996--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Hara, S. [Tidelands Oil Production Co., Long Beach, CA (United States)], Casteel, J. [USDOE Bartlesville Project Office, OK (United States)

    1997-05-11

    The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) 11-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and

  3. SAGD pilot project, wells MFB-772 (producer) / MFB-773 (injector), U1,3 MFB-53 reservoir, Bare Field. Orinoco oil belt. Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Mago, R.; Franco, L.; Armas, F.; Vasquez, R.; Rodriguez, J.; Gil, E. [PDVSA EandP (Venezuela)

    2011-07-01

    In heavy oil and extra heavy oil fields, steam assisted gravity drainage is a thermal recovery method used to reduce oil viscosity and thus increase oil recovery. For SAGD to be successfully applied in deep reservoirs, drilling and completion of the producer and injector wells are critical. Petroleos de Venezuela SA (PDVSA) is currently assessing the feasibility of SAGD in the Orinoco oil belt in Venezuela and this paper aims at presenting the methodology used to ensure optimal drilling and completion of the project. This method was divided in several stages: planning, drilling and completion of the producer, injector and then of the observer wells and cold information capture. It was found that the use of magnetic guidance tools, injection pipe pre-insulated and pressure and temperature sensors helps optimize the drilling and completion process. A methodology was presented to standardize operational procedures in the drilling and completion of SAGD projects in the Orinoco oil belt.

  4. The influence of strong electric fields on the DC conductivity of the composite cellulose, insulating oil, and water nanoparticles

    Science.gov (United States)

    Kierczyński, Konrad; Żukowski, Paweł

    2016-12-01

    The paper presents investigated the dependencies of DC conductivity electrical pressboard impregnated insolating oil of moisture content and electric field strength. The studies were conducted for measuring temperature in the range of 20 °C to 80 °C and the electric field intensity in the range of 10 kV/m to 1000 kV/m. With approximate waveforms in double logarithmic coordinates conductivity depending on the intensity of the electric field exponential function determined coefficients of determination R2. The value of this ratio is close to unity, which provides high accuracy measurements of conductivity and the exact stability and temperature measurements. It was found that changes in the electric field intensity will decrease the activation energy of conductivity of about 0.01 eV, thus increasing the DC conductivity of about 1.5 times.

  5. Improved Oil Recovery from Upper Jurassic Smackover Carbonates through the Application of Advanced Technologies at Womack Hill Oil Field, Choctaw and Clarke Counties, Eastern Gulf Coastal Plain

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2003-12-31

    , multiwell productivity analysis, and reservoir simulation studies indicate that water injection continues to provide stable support to maintain production from wells in the western unitized area of the field and that the strong water drive present in the eastern area of the field is adequate to sustain production from this part of the field. Although the results from the microbial characterization and microbial core experiments are very promising, it is recommended that an immobilized enzyme technology project not be implemented in the Womack Hill Field Unit until live (freshly taken and properly preserved) cores from the Smackover reservoir in the field are acquired to confirm the microbial core experiments to date. From 3-D geologic modeling, reservoir performance analysis, and reservoir simulation, four areas in the Womack Hill Field were identified as prospective infill drilling sites to recover undrained oil from the field. It was determined that the two areas in the unit area probably can be effectively drained by perforating higher zones in the Smackover reservoir in currently producing wells. The two areas in the eastern (non-unitized) part of the field require the drilling of new wells. The successful drilling and testing of a well in 2003 by J. R. Pounds, Inc. has proven the oil potential of the easternmost site in the non-unitized part of the field. Pruet Production Co. acquired new 2-D seismic data to evaluate the oil potential of the westernmost site. Because of the effects of a fault shadow from the major fault bounding the southern border of the Womack Hill Field, it is difficult to evaluate conclusively this potential drill site. Pruet Production Co. has decided not to drill this new well at this time and to further evaluate the new 2-D seismic profiles after these data have been processed using a pre-stack migration technique. Pruet Production Co. has elected not to continue into Phase II of this project because they are not prepared to make a proposal to

  6. Improved Oil Recovery from Upper Jurassic Smackover Carbonates through the Application of Advanced Technologies at Womack Hill Oil Field, Choctaw and Clarke Counties, Eastern Gulf Costal Plain

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2006-05-31

    , multiwell productivity analysis, and reservoir simulation studies indicate that water injection continues to provide stable support to maintain production from wells in the western unitized area of the field and that the strong water drive present in the eastern area of the field is adequate to sustain production from this part of the field. Although the results from the microbial characterization and microbial core experiments are very promising, it is recommended that an immobilized enzyme technology project not be implemented in the Womack Hill Field Unit until live (freshly taken and properly preserved) cores from the Smackover reservoir in the field are acquired to confirm the microbial core experiments to date. From 3-D geologic modeling, reservoir performance analysis, and reservoir simulation, four areas in the Womack Hill Field were identified as prospective infill drilling sites to recover undrained oil from the field. It was determined that the two areas in the unit area probably can be effectively drained by perforating higher zones in the Smackover reservoir in currently producing wells. The two areas in the eastern (non-unitized) part of the field require the drilling of new wells. The successful drilling and testing of a well in 2003 by J. R. Pounds, Inc. has proven the oil potential of the easternmost site in the non-unitized part of the field. Pruet Production Co. acquired new 2-D seismic data to evaluate the oil potential of the westernmost site. Because of the effects of a fault shadow from the major fault bounding the southern border of the Womack Hill Field, it is difficult to evaluate conclusively this potential drill site. Pruet Production Co. has decided not to drill this new well at this time and to further evaluate the new 2-D seismic profiles after these data have been processed using a pre-stack migration technique. Pruet Production Co. has elected not to continue into Phase II of this project because they are not prepared to make a proposal to

  7. Large-scale Tazhong Ordovician Reef-fiat Oil-Gas Field in the Tarim Basin of China

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xinyuan; WANG Zhaoming; YANG Haijun; ZHANG Lijuan; HAN Jianfa; WANG Zhenyu

    2009-01-01

    The Tazhong reef-flat oil-gas field is the first large-scale Ordovician organic reef type oil-gas field found in China.Its organic reefs were developed in the early Late Ordovician Lianglitag Formation, and are the first large reefs of the coral-stromatoporoid hermatypic community found in China.The organic reefs and platform-margin grain banks constitute a reef-fiat complex, mainly consisting of biolithites and grainstones.The biolithites can be classified into the framestone, bafflestone.bindstone etc.The main body of the complex lies around the wells from Tazhong-24 to Tazhong-82, trending northwest, with the thickness from 100 to 300 m, length about 220 km and width 5-10 km.It is a reef-flat lithologic hydrocarbon reservoir, with a very complex hydrocarbon distribution:being a gas condensate reservoir as a whole with local oil reservoirs.The hydrocarbon distribution is controlled by the reef complex.generally located in the upper 100-200 m part of the complex,and largely in a banded shape along the complex.On the profile,the reservoir shows a stratified feature.with an altitude difierence of almost 2200 m from southeast to northwest.The petroleum accumulation is controlled by karst reservoir beds and the northeast strike-slip fault belt. The total geologic reserves had reached 297.667 Mt by 2007.

  8. Integrated, multidisciplinary reservoir characterization, modeling and engineering leading to enhanced oil recovery from the Midway-Sunset field, California

    Energy Technology Data Exchange (ETDEWEB)

    Schamel, S.; Forster, C.; Deo, M. (Univ. of Utah, Salt Lake City, UT (United States)) (and others)

    1996-01-01

    The Pru Fee property is developed in a heavy oil, Class III (slope and basin clastic sand), reservoir of the Midway-Sunset field, San Joaquin Basin, California. Wells on the property were shut-in with an estimated 85% of the original oil remaining in place because the reservoir failed to respond to conventional cyclic steaming. Producibility problems are attributed to the close proximity of the property to the margin of the field. Specific problems include complex reservoir geometry, thinning pay, bottom water, and dipping beds. These problems are likely common at the margins of the Midway-Sunset and other Class III reservoirs. This project forms the first step in returning the property to production and explores strategies that might be applied elsewhere. Reservoir characterization, modeling, and engineering methods are integrated to design, simulate, and implement a pilot steam flood. A new drillhole provides good quality, core through the pay zone and a full suite of geophysical logs. Correlations between geological and petrophysical data are used to extrapolate reservoir conditions from older logs and yield a 3-dimensional petrophysical model. Numerical results illustrate how each producibility problem might influence production and provide a framework for designing the pilot steam flood. This first phase illustrates how a multidisciplinary team can use established technologies in developing the detailed petrophysical, geological, and numerical models needed to enhance oil recovery from marginal areas of Class III reservoirs.

  9. Integrated, multidisciplinary reservoir characterization, modeling and engineering leading to enhanced oil recovery from the Midway-Sunset field, California

    Energy Technology Data Exchange (ETDEWEB)

    Schamel, S.; Forster, C.; Deo, M. [Univ. of Utah, Salt Lake City, UT (United States)] [and others

    1996-12-31

    The Pru Fee property is developed in a heavy oil, Class III (slope and basin clastic sand), reservoir of the Midway-Sunset field, San Joaquin Basin, California. Wells on the property were shut-in with an estimated 85% of the original oil remaining in place because the reservoir failed to respond to conventional cyclic steaming. Producibility problems are attributed to the close proximity of the property to the margin of the field. Specific problems include complex reservoir geometry, thinning pay, bottom water, and dipping beds. These problems are likely common at the margins of the Midway-Sunset and other Class III reservoirs. This project forms the first step in returning the property to production and explores strategies that might be applied elsewhere. Reservoir characterization, modeling, and engineering methods are integrated to design, simulate, and implement a pilot steam flood. A new drillhole provides good quality, core through the pay zone and a full suite of geophysical logs. Correlations between geological and petrophysical data are used to extrapolate reservoir conditions from older logs and yield a 3-dimensional petrophysical model. Numerical results illustrate how each producibility problem might influence production and provide a framework for designing the pilot steam flood. This first phase illustrates how a multidisciplinary team can use established technologies in developing the detailed petrophysical, geological, and numerical models needed to enhance oil recovery from marginal areas of Class III reservoirs.

  10. Determining the oil-recovery coefficient for the developed part of the 4th gas-oil horizon in Anastasievsk-Troitskii field

    Energy Technology Data Exchange (ETDEWEB)

    Basin, Ya.N.; Konoplev, Yu.V.

    1971-01-01

    A special feature of the 4th gas-oil horizon is that it has a relatively small thickness (20 to 25 m), a huge gas cap (150 m thick), and an active bottom water drive. Production has to be regulated to prevent invasion of the oil zone by gas and water. In order to regulate production, geophysical methods were used to determine oil saturations. Position of the water-oil contact and of oil-gas contact were established with neutron gamma logs, neutron-neutron logs, and lateral logs. It was found that maximum displacement of oil by gas, and gas by oil occurred only near the initial gas-oil contact. The data indicated that about 72% of the oil in place is being recovered.

  11. The Effect of Oregano and Cinnamon Essential Oils on Fermentation Quality and Aerobic Stability of Field Pea Silages.

    Science.gov (United States)

    Soycan-Önenç, Sibel; Koc, Fisun; Coşkuntuna, Levent; Özdüven, M Levent; Gümüş, Tuncay

    2015-09-01

    This study was performed to determine the effect of field pea silages which were the organic acid (OA) alternative of oregano and cinnamon essential oils on fermentation quality and aerobic stability. Whole crop pea was harvested at full pod stage and wilted in the laboratory at the 48 h. The chopped pea was mixed and divided into equal portions allocated to five groups: CON (non-treated), distilled water, denoted as control group; OA group, a mixture of 60% formic acid, 20% sodium formate and 20% water applied at a rate of 5 g/kg fresh forage (Silofarm Liquid, Farmavet); origanum (ORE) group, Origanum onites essential oil at 400 mg/kg fresh forage; cinnamon (CIN) group, cinnamon essential oil at 400 mg/kg fresh forage; origanum+cinnamon (ORECIN) group, a mixture of ORE and CIN applied at an equal rate of 400 mg/kg fresh forage. Cinnamon decreased acetic acid (AA), ammonia nitrogen (NH3-N) and weight loss (WL) at the end of 60 days silage. Crude protein (CP) and dry matter (DM) increased by cinnamon essential oil. Yeasts were not detected in any treatments, including the control, after 7 days of air exposure. The CO2 amount decreased and the formation mold was inhibited in the aerobic period by the addition of cinnamon oil. Oregano did not show a similar effect, but when it was used with cinnamon, it showed synergic effect on AA and during aerobic period, it showed antagonistic effect on mold formation and DM losses. It was found in this study that cinnamon can be an alternative to organic acids.

  12. IRP/DSM Research and Demonstrating Engineering Report of Shengli Oil Field%胜利油田IRP/DSM研究与示范工程报告

    Institute of Scientific and Technical Information of China (English)

    刘军; 江武敏; 高月民; 张小宁; 严川; 尤春蓉

    2002-01-01

    @@ 1 Project Background In July 1995, China Oil and Natural Gas Corporation brings forward IRP/DSM research at the "9th Five-year Plan" electric program and research' s meeting. In July 1996, China Traffic and Energy Department of the State Planning Committee authorized the project about IRP/DSM research at Shengli Oil Field. In 1997, the project was put in oil field key science and technology program. This is a project about IRP/DSM research and implementation with key body of large electric users, and is the first project as the key body of large electric users inland.

  13. Simulation of permafrost changes due to technogenic influences of different ingeneering constructions used in nothern oil and gas fields

    Science.gov (United States)

    Filimonov, M. Yu; Vaganova, N. A.

    2016-10-01

    Significant amount of oil and gas is producted in Russian Federation on the territories with permafrost soils. Ice-saturated rocks thawing due to global warming or effects of various human activity will be accompanied by termocarst and others dangerous geological processes in permafrost. Design and construction of well pads in permafrost zones have some special features. The main objective is to minimize the influence of different heat sources (engineering objects) inserted into permafrost and accounting long-term forecast of development of permafrost degradation due to different factors in particular generated by human activity. In this work on the basis a mathematical model and numerical algorithms approved on 11 northern oil and gas fields some effects obtained by carrying out numerical simulations for various engineering systems are discussed.

  14. Research on Light Oil Temperature Field in Tanker%罐车内轻油温度场的研究

    Institute of Scientific and Technical Information of China (English)

    杨晓楼

    2013-01-01

      以油罐车内轻质油品为研究对象,模拟了汽油与柴油两种油品在相同边界条件下的温度分布,分析了温度场产生的原因,并研究了网格划分密度与结果精确度之间关系,为减少气阻现象的产生提供依据。%Simulated the temperature distribution of gasoline and diesel oil under the same boundary conditions with the research of light oil in tanker. Analyzed the cause of the temperature field, researched the relationship between the mesh density and the accuracy of the results. Provided a basis for reducing the generation of vapor lock.

  15. Control of hydrogen sulfide production in oil fields by managing microbial communities through nitrate or nitrite addition

    Science.gov (United States)

    Hubert, Casey R. J.

    Nitrate or nitrite injection into oil reservoirs during water flooding has the potential to control biological souring, the production of hydrogen sulfide (H2S) by sulfate-reducing bacteria (SRB). Souring control is essential because sulfide is toxic, sulfide precipitates can plug reservoir formations, souring lowers crude oil value, and SRB induce corrosion. Nitrate and nitrite can stimulate heterotrophic nitrate- or nitrite-reducing bacteria (hNRB) and nitrate- or nitrite-reducing, sulfide oxidizing bacteria (NRSOB). Nitrite also inhibits SRB activity by blocking the sulfate reduction pathway. Continuous up-flow packed-bed bioreactors were inoculated with produced water from the Coleville oil field to establish sulfide-producing biofilms similar to those found in sour reservoirs. Nitrate or nitrite addition to bioreactors indicated that the dose required for hNRB or NR-SOB to control souring depended on the concentration of oil organics. Either mechanism mediates the net removal of oil organics (lactate) with nitrate or nitrite, with lower doses of nitrate required due to its greater oxidative power. Microbial community analysis by reverse sample genome probing (RSGP) revealed that NR-SOB mediated sulfide removal at low nitrate or nitrite concentrations when lactate was still available to SRB and the redox potential was low. At high nitrate doses hNRB oxidized lactate directly, produced nitrite and maintained a high redox potential, thus excluding SRB activity. Facultatively chemolithotrophic Campylobacter sp. strains were isolated from the bioreactors and incorporated into RSGP analyses, revealing their dominance in both NR-SOB- and hNRB-containing communities. The metabolic flexibility of these strains may confer a competitive advantage over obligate chemolithotrophs like Thiomicrospira sp. strain CVO or hNRB that do not have NR-SOB activity like newly isolated Thauera sp. and Rhodobacter sp. strains. A single high dose of nitrite resulted in immediate

  16. Eos modeling and reservoir simulation study of bakken gas injection improved oil recovery in the elm coulee field, Montana

    Science.gov (United States)

    Pu, Wanli

    The Bakken Formation in the Williston Basin is one of the most productive liquid-rich unconventional plays. The Bakken Formation is divided into three members, and the Middle Bakken Member is the primary target for horizontal wellbore landing and hydraulic fracturing because of its better rock properties. Even with this new technology, the primary recovery factor is believed to be only around 10%. This study is to evaluate various gas injection EOR methods to try to improve on that low recovery factor of 10%. In this study, the Elm Coulee Oil Field in the Williston Basin was selected as the area of interest. Static reservoir models featuring the rock property heterogeneity of the Middle Bakken Member were built, and fluid property models were built based on Bakken reservoir fluid sample PVT data. By employing both compositional model simulation and Todd-Longstaff solvent model simulation methods, miscible gas injections were simulated and the simulations speculated that oil recovery increased by 10% to 20% of OOIP in 30 years. The compositional simulations yielded lower oil recovery compared to the solvent model simulations. Compared to the homogeneous model, the reservoir model featuring rock property heterogeneity in the vertical direction resulted in slightly better oil recovery, but with earlier CO2 break-through and larger CO2 production, suggesting that rock property heterogeneity is an important property for modeling because it has a big effect on the simulation results. Long hydraulic fractures shortened CO2 break-through time greatly and increased CO 2 production. Water-alternating-gas injection schemes and injection-alternating-shut-in schemes can provide more options for gas injection EOR projects, especially for gas production management. Compared to CO2 injection, separator gas injection yielded slightly better oil recovery, meaning separator gas could be a good candidate for gas injection EOR; lean gas generated the worst results. Reservoir

  17. The effect of an oil drilling operation on the trace metal concentrations in offshore bottom sediments of the Campos Basin oil field, SE Brazil.

    Science.gov (United States)

    Rezende, C E; Lacerda, L D; Ovalle, A R C; Souza, C M M; Gobo, A A R; Santos, D O

    2002-07-01

    The concentrations of Al, Fe, Mn, Zn, Cu, Pb, Ni, Cr, Ba, V, Sn and As in offshore bottom sediments from the Bacia de Campos oil field, SE Brazil, were measured at the beginning and at 7 months after completion of the drilling operation. Concentrations of Al, Fe, Ba, Cr, Ni and Zn were significantly higher closer to the drilling site compared to stations far from the site. Average concentrations of Al, Cu, and in particular of Ni, were significantly higher at the end of the drilling operation than at the beginning. Comparison between drilling area sediments with control sediments of the continental platform, however, showed no significant difference in trace metal concentrations. Under the operation conditions of this drilling event, the results show that while changes in some trace metal concentrations do occur during drilling operations, they are not significantly large to be distinguished from natural variability of the local background concentrations.

  18. Pilot demonstration of enhanced oil recovery by micellar polymer waterflooding: phase A. Quarterly report for the 1st quarter 1977. [Wilmington oil field, California

    Energy Technology Data Exchange (ETDEWEB)

    Wade, J.E.; Staub, H.L.

    1977-04-15

    A micellar-polymer tertiary waterflood project is underway in the HXa sand, Fault Block VB, Wilmington Oil Field. All tasks in Phase A, with the exception of Task No. 5, have been successfully finalized. Because Task No. 5, sulfonation of a Wilmington crude feedstock, was an integral part of the subjects to be resolved under Phase A, Decision Point No. 1 must be delayed several months. Marathon was unable to schedule sulfonation of Wilmington feedstocks but is now conducting bench sulfonation of Wilmington feedstocks and has called upon Witco and Stepan to prepare Wilmington sulfonates in their pilot plants. Flood tests and polymer adsorbtion-degradation tests were performed on old core material from the Upper Terminal sand need to be repeated on fresh core samples from the well to be drilled for the mini-injectivity test. (DLC)

  19. Floating Production Platforms and their Applications in the Development of Oil and Gas Fields in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    Dagang Zhang; Yongjun Chen; Tianyu Zhang

    2014-01-01

    This paper studies the current available options for floating production platforms in developing deepwater oil fields and the potential development models of future oil and gas exploration in the South China Sea. A detailed review of current deepwater platforms worldwide was performed through the examples of industry projects, and the pros and cons of each platform are discussed. Four types of platforms are currently used for the deepwater development: tension leg platform, Spar, semi-submersible platform, and the floating production system offloading. Among these, the TLP and Spar can be used for dry tree applications, and have gained popularity in recent years. The dry tree application enables the extension of the drilling application for fixed platforms into floating systems, and greatly reduces the cost and complexity of the subsea operation. Newly built wet tree semi-submersible production platforms for ultra deepwater are also getting their application, mainly due to the much needed payload for deepwater making the conversion of the old drilling semi-submersible platforms impossible. These platforms have been used in different fields around the world for different environments;each has its own advantages and disadvantages. There are many challenges with the successful use of these floating platforms. A lot of lessons have been learned and extensive experience accumulated through the many project applications. Key technologies are being reviewed for the successful use of floating platforms for field development, and potential future development needs are being discussed. Some of the technologies and experience of platform applications can be well used for the development of the South China Sea oil and gas field.

  20. Excito-repellency of essential oils against an Aedes aegypti (L.) field population in Thailand.

    Science.gov (United States)

    Boonyuan, Wasana; Grieco, John P; Bangs, Michael J; Prabaripai, Atchariya; Tantakom, Siripun; Chareonviriyaphap, Theeraphap

    2014-06-01

    An investigation of the behavioral responses of Aedes aegypti (= Stegomyia aegypti) to various concentrations of essential oils (2.5, 5, and 10%) extracted from hairy basil (Ocimum americanum Linn), ginger (Zingiber officinale Roscoe), lemongrass (Cymbopogon citratus Stapf), citronella grass (Cymbopogon nardus Rendle), and plai (Zingiber cassumunar Roxb) were performed using an excito-repellency test chamber. Results showed that Ae. aegypti exhibited varying levels of escape response in both the contact and noncontact chambers in response to different essential oils. The magnitude of the behaviors changed in a dose-response fashion depending on the percent volume to volume concentration of oil used. A 2.5% concentration of hairy basil oil produced a significantly greater escape response compared to the other extracts at the same concentration (POils of ginger, lemongrass, and citronella produced stronger irritant and repellent responses at the median 5% concentration compared to the lowest and highest concentrations. There was marked suppression of escape for both contact and noncontact tests using 10% concentrations of hairy basil, lemongrass, and citronella, with high knockdown for all three oils after 30 min. Hairy basil and lemongrass had the highest insecticidal activity to Ae. aegypti, with LC50 values of 6.3 and 6.7 percent, respectively. We conclude that the essential oils from native plants tested, and likely many other extracts found in plants, have inherent repellent and irritant qualities that should to be screened and optimized for their behavior-modifying properties against Ae. aegypti and other biting arthropods of public health and pest importance. © 2014 The Society for Vector Ecology.

  1. Application of Tension Leg Platform Combined with Other Systems in the Development of China Deepwater Oil Fields

    Institute of Scientific and Technical Information of China (English)

    ZHANG Da-gang

    2006-01-01

    The development of deepwater oil fields has reached a new stage with the dramatic increase in water depth and the recent increasing demands of the economic development in the filed. The use of a Tension Leg Platform (TLP) combined with other systems, such as Floating Production Storage and Offloading (FPSO) system, Floating Production Unit (FPU) system, Tender Assisted Drilling (TAD) system, etc., has drawn the industry attention and increased significantly in the past few years. For the areas lacking of pipeline system, the use of TLP(s) combined with FPSO has been chosen to efficiently develop the deepwater fields. The TLP with a Tender Assisted Drilling system significantly reduces the payload of the platform and reduces the investment in the TLP system substantially. This opens the door for many new deepwater field developments to use the tension leg platform. The advantage of the TLP combined with a TAD system is more significant when several TLPs are used for the continuous development of the field. One of the applications for the TLP with a tender assisted drilling system can be in the development of an offshore marginal field. Owing to the increase of water depth, the conventional fixed platform model for the exploration of those fields becomes uneconomical. It also would be too expensive to use a large TLP structure for those marginal fields due to the large amount of initial investment. The TLP system with tender assisted drilling can be used to develop those fields economically. There are many marginal fields in China offshore, especially in shelf areas. The application of this field developing model, combined with the existing field developing experience in China, will open the door for many marginal field developments. This paper will review the application of the combined TLP system through some examples of completed/ongoing projects, and major technical issues encountered in those practices. The potential application of this technology in China

  2. Developing High Water-cut Oil Fields Deeply to Enhance Their Oil Recovery(Continued from page 14 in the third issure)

    Institute of Scientific and Technical Information of China (English)

    Han Dakuang

    1994-01-01

    @@ Development of new EOR techniques with tertiary production as a main technique As stated above, the ultimate recovery of conventional oil in our country is estimated to be 33.6%, i.e., about 66.4% of the oil reserves cannot be recovered by water injection and may only be targeted for tertiary oil recovery or for other types of new technologies.

  3. Dynamic Variation of Land-use Types of the Constructed Wetland before and after Oil-field Water Irrigation Based on 3S Technology

    Institute of Scientific and Technical Information of China (English)

    CHEN; Ming-hui; ZHANG; Chen; HU; Yan; SU; Wei; DONG; De-ming

    2012-01-01

    [Objective] The study aimed at analyzing the dynamic variation of land-use types of the constructed wetland before and after oil-field water irrigation based on 3S technology. [Method] At semi-arid and arid areas in the west of Jilin Province, water resource balance between the amount of oil-field water supply and ecological water requirement in the constructed wetland irrigated by oil-field water during 2001-2010 was investigated firstly. Afterwards, based on 3S technology, the partition and dynamic variation of land-use types of the constructed wetland before and after oil-field water irrigation in 2001, 2006, 2008 and 2010 were analyzed. [Result] The annual ecological water requirement of the constructed wetland from 2003 to 2010 varied from 1.62×106 to 2.24×106 m3, and the annual amount of oil-field water supply in the region changed from 2.12×106 to 2.84×106 m3, which showed that the supply amount of oil-field water could meet the basic ecological water requirement of the constructed wetland. Meanwhile, compared with 2001, the areas of water region and paddy field in 2010 increased by 2.3 and 10.0 times, and the areas of forest and marsh rose by 40.15% and 29.5.0% respectively. [Conclusion] Water shortage and ecological environment problem of arid and semi-arid areas had been improved by oil-field water irrigation.

  4. Application of Neuro-Net Technology to Reservoir Prediction in Chendao Oil Field

    Institute of Scientific and Technical Information of China (English)

    Jiang Suhua

    1996-01-01

    @@ Recently, the Research Institute of Geological Sciences of the Shengli oil region and the University of Petroleum have been cooperated in developing a set of intelligent expert system to predicte reservoir and to estimate sand body thickness using multiple seismic information.

  5. Trajectory of an oil spill off Goa, eastern Arabian Sea: Field observations and simulations

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Sudheesh, K.; Babu, M.T.; Jayakumar, S.; ManiMurali, R.; Saran, A.K.; Sharma, L.H.; Rajan, B.; Srivastava, M.

    An oil spill occurred off Goa, west coast of India, on 23 March 2005 due to collision of 2 vessels. In general, fair weather with weak winds prevails along the west coast of India during March. In that case, the spill would have moved slowly...

  6. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 87

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Approximately 30 research projects are summarized in this report. Title of the project, contract number, company or university, award amount, principal investigators, objectives, and summary of technical progress are given for each project. Enhanced oil recovery projects include chemical flooding, gas displacement, and thermal recovery. Most of the research projects though are related to geoscience technology and reservoir characterization.

  7. Adaptive Management and Planning Models for Cultural Resources in Oil and Gas Fields in New Mexico and Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Eckerle, William; Hall, Stephen

    2005-12-30

    In 2002, Gnomon, Inc., entered into a cooperative agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) for a project entitled, Adaptive Management and Planning Models for Cultural Resources in Oil and Gas Fields in New Mexico and Wyoming (DE-FC26-02NT15445). This project, funded through DOE’s Preferred Upstream Management Practices grant program, examined cultural resource management practices in two major oil- and gas-producing areas, southeastern New Mexico and the Powder River Basin of Wyoming (Figure 1). The purpose of this project was to examine how cultural resources have been investigated and managed and to identify more effective management practices. The project also was designed to build information technology and modeling tools to meet both current and future management needs. The goals of the project were described in the original proposal as follows: Goal 1. Create seamless information systems for the project areas. Goal 2. Examine what we have learned from archaeological work in the southeastern New Mexico oil fields and whether there are better ways to gain additional knowledge more rapidly or at a lower cost. Goal 3. Provide useful sensitivity models for planning, management, and as guidelines for field investigations. Goal 4. Integrate management, investigation, and decision- making in a real-time electronic system. Gnomon, Inc., in partnership with the Wyoming State Historic Preservation Office (WYSHPO) and Western GeoArch Research, carried out the Wyoming portion of the project. SRI Foundation, in partnership with the New Mexico Historic Preservation Division (NMHPD), Statistical Research, Inc., and Red Rock Geological Enterprises, completed the New Mexico component of the project. Both the New Mexico and Wyoming summaries concluded with recommendations how cultural resource management (CRM) processes might be modified based on the findings of this research.

  8. Geology and habitat of oil in Ras Budran field, Gulf of Suez, Egypt

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhary, L.R.; Taha, S.

    1987-10-01

    The Ras Budran structure at the deepest mappable seismic reflector, the top of the Kareem Formation (middle Miocene), is a broad northeast-southwest-trending anticlinal feature with an anomalous strike nearly at right angles to the main Gulf of Suez trend. Oil is produced from three units of Nubian Formation sandstone from a depth of 11,000-12,000 ft (3352-3657 m). The lower unit of Paleozoic age averages 10% porosity and has up to 200 md in-situ permeability. Wells completed in this unit produce up to 2000 BOPD. In contrast, the sands to the upper two units of the Early Cretaceous have 15-20% porosity and up to 700 md permeability. Wells completed in this unit produce 6000-8000 BOPD. The Ras Budran structure was formed primarily during an intra-Rudeis tectonic phase (lower Miocene). Oil migration for accumulation in the structure started in the late Miocene or Pliocene when the Santonian Brown Limestone and the Eocene Thebes Formation, the main source beds in the Gulf of Suez, reached the threshold of oil generation at a burial depth of approximately 10,000 ft (3048 m). At this depth, the organic matter in the source beds had a high transformation ratio (0.10 to 0.15), high yields of C/sub 15+/ soluble organic matter and C/sub 15+/ saturated hydrocarbons, vitrinite reflectance (R/sub 0/) of 0.62%, and a time-temperature index (TTI) value of 15. Oil migration from mature source beds in adjoining lows into low-potential Nubian reservoirs is easily explained by fault planes that acted as conduits for oil migration. 16 figures, 3 tables.

  9. Applications of EOR (enhanced oil recovery) technology in field projects--1990 update

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J.F.; Thomas, R.D.

    1991-01-01

    Trends in the type and number of US enhanced oil recovery (EOR) projects are analyzed for the period from 1980 through 1989. The analysis is based on current literature and news media and the Department of Energy (DOE) EOR Project Data Base, which contains information on over 1,348 projects. The characteristics of the EOR projects are grouped by starting date and process type to identify trends in reservoir statistics and applications of process technologies. Twenty-two EOR projects starts were identified for 1989 and ten project starts for 1988. An obvious trend over recent years has been the decline in the number of project starts since 1981 until 1988 which corresponds to the oil price decline during that period. There was a modest recovery in 1989 of project starts, which lags the modest recovery of oil prices in 1987 that was reconfirmed in 1989. During the time frame of 1980 to 1989, there has been a gradual improvement in costs of operation for EOR technology. The perceived average cost of EOR has gone down from a $30/bbl range to low $20/bbl. These costs of operation seems to stay just at the price of oil or slightly above to result in marginal profitability. The use of polymer flooding has drastically decreased both in actual and relative numbers of project starts since the oil price drop in 1986. Production from polymer flooding is down more than 50%. Long-term plans for large, high-cost projects such as CO{sub 2} flooding in West Texas, steamflooding in California, and hydrocarbon flooding on the North Slope have continued to be implemented. EOR process technologies have been refined to be more cost effective as shown by the continued application and rising production attributable to EOR. 8 refs., 6 figs., 13 tabs.

  10. Numerical and Experimental Study of the Flow Field Structure Evolution in the Circular Recess of Oil Cavity

    Directory of Open Access Journals (Sweden)

    Feng Shen

    2014-01-01

    Full Text Available The laminar radial flow in the oil cavity of heavy-duty computer numerical control (CNC machines is very complicated and has not been fully explored. Navier-Stokes equations have been applied through the whole flow region using finite volume approach to explore this complicated flow phenomenon, including the influences of the clearance height (h, inlet nozzle Reynolds number (Re, and geometrical aspect ratio (e on flow behaviors. A fluid dynamic experiment has been conducted to study the flow structure by using particle image velocimetry (PIV. Numerical simulation results have been compared with the experimental results, finding a good agreement with the studied cases. The results suggest that there are complex vortices in the oil cavity. Flow field structure of the oil cavity largely depends on h, Re, and e. Re and e have a great influence on the size and amount of vortices, and h has slight effects on the size of the vortices. The lengths of primary, secondary, and tertiary isolated vortices have a linear relationship with h. The lengths of the primary and secondary isolated vortices increase linearly with ascending e as e is small. But when Re and e are large enough, the size of the three vortices decreases.

  11. Successful field application of novel, non-silicone antifoam chemistries for high foaming heavy oil storage tanks in northern Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Wylde, J.J. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Clariant Oil Services, Montreal, PQ (Canada)

    2008-10-15

    Heavy oil operators in northern Alberta have experienced production problems associated with foam formation in crude oil storage tanks. The foam could enter the transportation trucks and create separation problems in the process systems. Any antifoam used in the system could not contain silicone based polymers since these compounds affected the catalysts used in upgrading the crude oil and in the manufacture of asphalt. As such, there was a need to change the performance of the antifoam product. A phosphate ester and a salted amine were the previous incumbent antifoam products that did not perform well. Several chemistries were tested, including phosphate based products; ethoxylated and propoxylated esters; polyethylene glycol esters and oleates; alcohols, fatty alcohols and ethoxylated; and propoxylated alcohols. All products had to be freeze protected to -40 degrees C, which influenced the efficacy of antifoam chemicals. This paper described how laboratory testing has evolved to field wide implementation of a combined defoamer/antifoam chemistry. The laboratory tests revealed that foam induced in heavy, aged crude was very challenging and required the addition of heptane to create the foam. A potential follow-up may be to induce the foam without the addition of heptane by using a Seltzer cylinder in a semi-quantitative manner to rank performance of products against one another. The final selection of antifoam will depend on supply chain cost since the performance of the 2 blend products was essentially the same. 12 refs., 7 figs.

  12. Outcomes of pregnancy among women living in the proximity of oil fields in the Amazon basin of Ecuador.

    Science.gov (United States)

    San Sebastián, Miguel; Armstrong, Ben; Stephens, Carolyn

    2002-01-01

    Oil companies have released billions of gallons of untreated wastes and oil directly into the environment of the Ecuadorian Amazon. This cross-sectional study investigated the environmental conditions and reproductive health of women living in rural communities surrounded by oil fields in the Amazon basin and in unexposed communities. Water from local streams was analyzed for total petroleum hydrocarbons (TPH). The women, aged 17 to 45 years, had resided for at least three years in the study communities. Socioeconomic and reproductive histories of the last three pregnancies were obtained from interviews. Information from the questionnaire was available for 365 exposed and 283 non-exposed women. The study was conducted from November 1998 to April 1999. Streams of exposed communities had TPH concentrations above the allowable limit. After adjustment for potential confounders, the pregnancies of women in exposed communities were more likely to end in spontaneous abortion (OR: 2.47; 95% CI: 1.61-3.79; p pollution in the area is needed.

  13. Standard practice for evaluating and qualifying oil field and refinery corrosion inhibitors using the rotating cylinder electrode

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This practice covers a generally accepted procedure to use the rotating cylinder electrode (RCE) for evaluating corrosion inhibitors for oil field and refinery applications in defined flow conditions. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  14. Activities of the Oil Implementation Task Force, December 1990--February 1991; Contracts for field projects and supporting research on enhanced oil recovery, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    Tiedemann, H.A. (ed.) (USDOE Bartlesville Project Office, OK (USA))

    1991-03-01

    The Oil Implementation Task Force was appointed to implement the US DOE's new oil research program directed toward increasing domestic oil production by expanded research on near- or mid-term enhanced oil recovery methods. An added priority is to preserve access to reservoirs that have the largest potential for oil recovery, but that are threatened by the large number of wells abandoned each year. This report describes the progress of research activities in the following areas: chemical flooding; gas displacement; thermal recovery; resource assessment; microbial technology; geoscience technology; and environmental technology. (CK)

  15. Geographical differences in cancer incidence in the Amazon basin of Ecuador in relation to residence near oil fields

    National Research Council Canada - National Science Library

    Hurtig, Anna-Karin; San Sebastián, Miguel

    2002-01-01

    Since 1972, oil companies have extracted more than 2 billion barrels of crude oil from the Ecuadorian Amazon, releasing billions of gallons of untreated wastes and oil directly into the environment...

  16. Paleo-oil-Water Contact and Present-Day Gas-Water Contact:Implication for Evolution History of Puguang Gas Field,Sichuan Basin,China

    Institute of Scientific and Technical Information of China (English)

    Li Pingping; Zou Huayao; Zhang Yuanchun; Wang Cunwu; Zhang Xuefeng

    2008-01-01

    The Puguang (普光) gas field is the largest gas field found in marine carbonate in China.The Puguang gas field experienced complicated evolution history from paleo-oil pool to gas pool.The purpose of this article is to reveal the evolution history of Puguang gas field through systematic study on the relationship between paleo-oil-water contact (POWC) and present-day gas-water contact (PGWC).POWC was recognized by observing the change of relative content of residual solid bitumen in the cores,and PGWC was observed using log and drilling stem test data.Two types of relationship between POWC and PGWC were observed in the Puguang gas field:POWC is above PGWC,and POWC is below PGWC.The former is normal as oil cracking may cause gas-water contact to move downward.The latter can be interpreted by lateral gas re-migration and re-accumulation caused by changes in structural configuration.The relationship between POWC and PGWC suggests that during oil charge,the southwestern and northwestern parts of the Puguang gas field were structurally lower than the northeastern and southeastern parts.Thrusting from Xuefengshan (雪峰山) since Yanshanian movement and from Dabashan (大巴山) since Himalayan movement resulted in the relative uplift of the southwestern and northwestern parts of the Puguang structure,which significantly changed the structural configuration.Based on the paleo-structure discussed in this article,the most probable migration directions of paleo-oil were from the northwest to the southeast and from the southwest to the northeast.Consequently,the evolution history of the Puguang gas field can be divided into three stages,namely,oil charging (200-170 Ma),cracking oil to gas (155-120 Ma),and gas pool adjustment (1200-0Ma).

  17. Development a method for producing vegetable oil from safflower seeds by pressing in the field of ultrasound

    Directory of Open Access Journals (Sweden)

    S. T. Antipov

    2015-01-01

    Full Text Available The article shows the prospects of production in agriculture safflower seeds for food and extract biologically active components. The physicochemical composition of safflower, which is rich in unsaturated fatty acids. Safflower oil has a soothing and moisturizing effect, provides a barrier function of the skin, therefore, fatty oil is promising in terms of scientific evidence use in medical practice. In the article the task of developing a set of processes to extract oil from the seeds of safflower and effective use. The ways of processing safflower seed to obtain oil. It is the most productive and promising method for processing seeds of safflower scheme press extruder. Described compression step in the processing of safflower seeds scheme press extruder. Crucial processing technology safflower seeds have two fundamental rheological characteristics of viscosity and elasticity, which depend on the structure of the raw material, the molecular weight distribution, and processing conditions such as temperature, pressure and flow rate. The dependence of the density of its safflower cake moisture concluded that with humidity increase the particle density increases, due to the swelling of colloids grain. Furthermore, the dependence of shear stress and the effective viscosity versus shear rate, it is concluded that with increasing shear rate influence of temperature on the viscosity gradient weakens. The article shows the study of the prospects of the extrusion process in the presence of the ultrasound field and the creation of equipment that takes into account these properties. The use of ultrasound significantly reduces energy consumption and necessary to prevent the molding ion safflower seeds, improves product quality.

  18. CO2 and H2S gas injection heavy oil field

    Energy Technology Data Exchange (ETDEWEB)

    Padua, K.G.O. [Petrobras (Canada)

    2011-07-01

    Heavy oils constitute one of the largest fossil fuel reserves on earth; among them there are naturally fractured carbonate reservoirs under bottomwater. Those reservoirs are composed of sour heavy oil and its recovery is difficult, miscible processes are expensive and thermal methods are inefficient due to the harsh conditions. The aim of this paper is to investigate the use of injection of carbon dioxide and hydrogen sulfide mixtures. Fluid and reservoir characterizations were conducted using published observations, dynamic modeling and a comparative study. Reservoir performance under natural depletion and immiscible gas injection with effluent gas were then analyzed and compared. Expected breakthrough and composition of the produced fluid were presented in this study to provide the input necessary for operational planning. This paper presented a comparison between reservoir performance under natural depletion and immiscible gas injection, providing qualitative information to evaluate an effluent gas project.

  19. Investments in oil field development by the example of Tomsk oblast

    Science.gov (United States)

    Shmidt, Ye I.; Il'ina, G. F.; Matveenko, I. A.

    2015-11-01

    The article describes the geologic structure of the formation located not far from Strezhevoy Tomsk Oblast. The formation has been poorly studied by seismic methods. The reserves categories C1 and C2 as well as hydrocarbon potential are presented. 4 exploratory and 39 production wells are designed to be drilled depending on geologic knowledge and formation conditions. The article deals with the investment plan including development, oil export expenditures and implementing cost calculation.

  20. Reefer madness : Nisku play in Pembina field creates controversy in oil town of Drayton Valley

    Energy Technology Data Exchange (ETDEWEB)

    Ball, C.

    2005-08-01

    The Pembina-Nisku play has become a significant source of light oil discoveries in the Western Canada Sedimentary Basin in the past 5 years. This paper described the discovery of the play and the initial exploration efforts of 1977. It was noted that the play is now dominated by Canadian juniors with market capitalization of less than $300 million. Since 2004, industry has reported 4 major discoveries located at the heart of the trend. Hydrocarbon reservoirs along the Pembina-Nisku trend are typically light oil with associated sour gas. Using 3-D seismic interpretation and detailed geological modelling, the industry discovered several large oil pools, some of which are expected to yield 5 to 10 million barrels of oil. Each of the large discoveries has been valued at more than $75 million. However, public opposition to new wells has brought exploration to a standstill. The Alberta Energy and Utilities Board (EUB) ordered that all wells in the area must be licensed with a critical sour designation and that companies must notify all residents within a 6.9 km radius of any drilling activity. Communities are concerned that emergency response plans are inadequate to deal with the safety risks presented by the developments. Details of the EUB's communications strategies with the public were presented. It was noted that poor communications during a recent leak have contributed to public concerns. A background of some of the junior companies involved in the play was provided. It was concluded that convincing the public that sour gas can be produced safely is a challenge facing the industry, and that answering that challenge will determine whether the Nisku play will bring new life to Pembina. 5 figs.

  1. THE ESSENTIAL OIL OF LEMON BALM (Melissa officinalis L.), ITS COMPONENTS AND USING FIELDS

    OpenAIRE

    BAHTİYARCA BAĞDAT, Reyhan; Coşge, Belgin

    2012-01-01

    Lemon balm (Melissa officinalis L.), member of Lamiaceae (formerly Labiatae) family, is one of the important medicinal plant species. Today, it is used in different branches of industry (such as medicine, perfume, cosmetic, and food etc.) in many countries of the world. The main components of lemon balm essential oil, ranged from 0.01 to 0.25%, are 39% citronellal, 33% citral (citronellol, linalool) and geraniol. It is traditionally used as a mild sedative, spasmolytic and antibacterial agent...

  2. Repressing sulfate-reducing bacteria growth in the affusion system of oil field by changing ecological factors

    Institute of Scientific and Technical Information of China (English)

    SHAN Dan; MA Fang; WANG Chen; WEI Li; GUO Jing-bo

    2008-01-01

    Aiming at the corrosion issue of oil extraction equipments caused by sulfate-reducing bacteria (SRB) reproducing in oil field affusion system, we studied the dominant strains in the SRB community and the impact of four ecological factors on the growth of the dominant strains: temperature, pH, mineralization degree and concen-tration of PAM (Polyacrylamine). The feasibility of repressing the growth of SRB by changing ecological factors was also discussed. The results indicate that Desulfobacter (one genus of SRB) is the preponderant strains of the system, and the order of the effect of four ecological factors is pH>temperature>the concentrations of PAM>mineralization degree. The optimal pH for the highest growth rate of SRB is 8.0. No growth of SRB was observed when pH 12. The optimal temperature for the growth of SRB is 40 ℃ and the ecological amplitude is 20-50 ℃. The appropriate concentration values of PAM is 400 -800 mg/L, beyond of which the multiplication rate and growth quantity of cell decrease obviously. The effect of mineralization degree of SO42- ,HCO3- and Na+ on the growth of SRB has reached an extremely remarkable level, and the change of three ions' oncentration in water obviously effects SRB. The optimum values on the main ions in the system are Cl- of 200 mg/L, HCO3- of 900 mg/L,SO42- of 400 mg/L, Mg2+ of 60 mg/L and Na+ of 900 mg/L. Our results indicate that it is possible to repress the growth of SRB by changing the ecological factors in oil field affusion system.

  3. The Petrology and Diagenetic History of the Phacoides Sandstone, Temblor Formation at the McKittrick Oil Field, California

    Science.gov (United States)

    Kaess, A. B.; Horton, R. A.

    2015-12-01

    The McKittrick oil field is located near the western edge of the San Joaquin Basin, California. The oil field is currently in production with 480 wells producing from the Tulare, San Joaquin, Reef Ridge, Monterey, Temblor, Tumey, and Kreyenhagen formations. Within the Temblor Formation production is mainly from the Miocene Carneros and the Phacoides sandstones. Eighty-two samples from the Phacoides sandstone (2403 - 3045 m below surface) were obtained from the California Well Sample Repository to characterize and understand the diagenetic history and its influence on its reservoir properties. Petrographic thin sections were analyzed by quantitative optical petrography, energy dispersive X-ray spectrometry, and imaging with back-scatter electron and cathodoluminescence. The Phacoides sandstone consists of fine to very coarse, poorly to well-sorted, arkosic arenites, and wackes with detrital framework grains including sub-angular quartz, K-feldspar (microcline and orthoclase), plagioclase, and lithic fragments. Ba-free, Ba-rich, and perthitic K-feldspars are present. Accessory minerals include glauconite, biotite, muscovite, magnetite, titanomagnetite, sphene, zircon, apatite, corundum, and rutile. Diagenetic alteration includes: (1) compaction, (2) mineral dissolution, (3) albitization of feldspars, alteration of biotite to pyrite and chlorite, replacement of framework grains by calcite, (4) alteration of volcanic rock fragments, (5) cementation by kaolinite, calcite and dolomite, and (6) precipitation of K-feldspar and quartz overgrowths. Early-formed fractures were healed by authigenic quartz, albite, and K-feldspars. Precipitation of carbonates and clays, rearranging of broken grains, and formation of pseudomatrix reduced primary porosity. Secondary porosity is common and formed initially by the dissolution of plagioclase (excluding albite) and volcanic fragments, and later by dissolution of calcite, dolomite, and detrital K-feldspars. Hydrocarbon emplacement was

  4. Operation history of hydraulic jet pump on teh Chengbei oil field, China. Chengbei yuden ni okeru haidororikku jet pump no shiyo jisseki

    Energy Technology Data Exchange (ETDEWEB)

    Terao, Yoshihiro; Takagi, Sunao

    1989-11-01

    Changbei oil field in China uses hydraulic jet pump(HJP) to cope with the increase of oil production and increase of water content in the oil field. This paper described the practical result. This pump makes high speed jet by driving fluid, and converts the dynamic energy to pressure energy by decelerating with a diffuser to push up oil. Wellheads damaged by sand friction or near the gas cap were removed. The production from March, 1988 to October increased at the rate of 114kl/day at total 8 wellheads. Heavy oil of API specific gravity of 16 degree could be proved. Since the separation of oil and water was inferior, so that the countermeasures were studied but the cause was not known. Troubles or failures of main body, nozzle and throat of HJP were not occurred. Any effect could not be found at a wellhead of water content exceeding 50 to 60% because only water production increased. Consequently, this process could result the increase of oil production with lower cost and without mechanical failures. 2 refs., 7 figs., 7 tabs.

  5. Oil field chemicals synergistic effects on the corrosion rate of L-80 steel in sea and formation waters

    Energy Technology Data Exchange (ETDEWEB)

    Al Hashem, A.; Carew, J. [Petroleum Research and Studies Center, Kuwait Institute for Scientific Research, P.O. Box 24885, 13109 Safat Kuwait (Kuwait); Al-Borno, A. [Charter Coating Service (2000) Ltd., no 6, 4604, 13 Street N.E., Calgary, AB T2E 6P1 (Canada)

    2004-07-01

    The corrosion rate of tubular grade L-80 carbon steel under downhole conditions of a northern oil field of Kuwait was investigated. This was done using the injection seawater, formation water and a 50:50 mixture of both waters in the presence of commercially available corrosion inhibitor, scale inhibitor, and biocide products separately and in combination with each other. The main objective of this study was to investigate the effect of the corrosion inhibitor and its interaction with the scale inhibitor and the biocide, as seen in the corrosion rate of L80 carbon steel. This was done using the manufacturers' recommended dosage levels of the corrosion inhibitor, scale inhibitor and biocide. The corrosion rates were measured by linear polarization. Tests were conducted using the rotating cylinder electrode method with rotational speeds of 1000 and 2000 rpm at 80 deg. C. The seawater results indicated that the corrosion-scale inhibitor and biocide-scale inhibitor combinations provided the best protection at both rotation speeds. In formation water, the effects of rotation speed were more apparent with higher corrosion rates of L-80 carbon steel accompanying higher shear forces. In the 50: 50 mix waters and the formation water, the corrosion-scale inhibitors-biocide combination provided the best protection at both rotational speeds under downhole conditions of a northern oil field of Kuwait. (authors)

  6. Strontium isotope systematics of mixing groundwater and oil-field brine at Goose Lake in northeastern Montana, USA

    Science.gov (United States)

    Peterman, Zell E.; Thamke, Joanna N.; Futa, Kiyoto; Preston, Todd

    2012-01-01

    Groundwater, surface water, and soil in the Goose Lake oil field in northeastern Montana have been affected by Cl−-rich oil-field brines during long-term petroleum production. Ongoing multidisciplinary geochemical and geophysical studies have identified the degree and local extent of interaction between brine and groundwater. Fourteen samples representing groundwater, surface water, and brine were collected for Sr isotope analyses to evaluate the usefulness of 87Sr/86Sr in detecting small amounts of brine. Differences in Sr concentrations and 87Sr/86Sr are optimal at this site for the experiment. Strontium concentrations range from 0.13 to 36.9 mg/L, and corresponding 87Sr/86Sr values range from 0.71097 to 0.70828. The local brine has 168 mg/L Sr and a 87Sr/86Sr value of 0.70802. Mixing relationships are evident in the data set and illustrate the sensitivity of Sr in detecting small amounts of brine in groundwater. The location of data points on a Sr isotope-concentration plot is readily explained by an evaporation-mixing model. The model is supported by the variation in concentrations of most of the other solutes.

  7. Legal Treatment Given the Oil leak in the Frade field . Case Study: (i Liability and signing of Conduct Adjustment Term

    Directory of Open Access Journals (Sweden)

    Alexandre Ricardo Machado

    2016-06-01

    Full Text Available This paper is to discuss how were treated  the legal and environmental consequen- ces caused by the large oil spill occurred in the FRADE FIELD, State of Rio de Janeiro, Brazil by the Company CHEVRON Brazil, in the face of brazilian authorities. On the text it will be discussed important decisions taken related to objective liability from the Company due to damages and the theories that have been taken into consideration for the extinction of two public civil actions filed by the Federal Public Ministry by an agre- ement called “Conduct Adjustment Term”. This study will make a chronological analysis of the facts that occurred on the two oil spills and how the company Chevron Brazil handled the incident, especially after be signed the undertaking between this Company, the Federal Public Ministry (MPF, National Agency Petroleum (ANP and the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA solving the two public civil actions and proposals related to incidents in the Frade field in 2011 and 2012. The process also triggered imposition of financial penalties, already collected. On this comments shall be made considerations related to the incident and its “solution” for this legal formula and, given the severity of the accident, the indicated measures show hit or not the sectors involved.

  8. Chromosomal aberrations in lymphocytes of employees in transformer and generator production exposed to electromagnetic fields and mineral oil.

    Science.gov (United States)

    Skyberg, K; Hansteen, I L; Vistnes, A I

    2001-04-01

    The objective was to study the risk of cytogenetic damage among high voltage laboratory workers exposed to electromagnetic fields and mineral oil. This is a cross sectional study of 24 exposed and 24 matched controls in a Norwegian transformer factory. The exposure group included employees in the high voltage laboratory and in the generator soldering department. Electric and magnetic fields and oil mist and vapor were measured. Blood samples were analyzed for chromosomal aberrations in cultured lymphocytes. In addition to conventional cultures, the lymphocytes were also treated with hydroxyurea and caffeine. This procedure inhibits DNA synthesis and repair in vitro, revealing in vivo genotoxic lesions that are repaired during conventional culturing. In conventional cultures, the exposure group and the controls showed similar values for all cytogenetic parameters. In the DNA synthesis- and repair-inhibited cultures, generator welders showed no differences compared to controls. Among high voltage laboratory testers, compared to the controls, the median number of chromatid breaks was doubled (5 vs. 2.5 per 50 cells; P0.05) and the median number of aberrant cells was 5 vs. 3.5 (Poil exposure may produce chromosomal aberrations.

  9. Changes of the content of oil products in the oil-polluted peat soil of a high-moor bog in a field experiment with application of lime and fertilizers

    Science.gov (United States)

    Erkenova, M. I.; Tolpeshta, I. I.; Trofimov, S. Ya.; Aptikaev, R. S.; Lazarev, A. S.

    2016-11-01

    A field model experiment on stimulating the activity of native oil microorganisms-decomposers was performed on an oil-polluted area in a high-moor bog under its total flooding in the northern taiga (Western Siberia). For two summer months, the doses of lime and nitrogen, phosphorus, and potassium fertilizers applied have caused a decrease in the oil products (OP) content by 54% relative to their initial amount. The decrease of the OP content in the soil profiles was nonuniform, and at the depth of 30-50 cm it was accompanied by the acidification of peat. The stimulation of the activity of aboriginal microorganisms by applying lime and mineral fertilizers led to the development of migration processes with the participation of oil and products of its transformation. These processes differed from those in the soil without application of lime and fertilizers. An original technology of applying lime and fertilizers providing minimal disturbances the upper 50-cm peat layer is suggested.

  10. Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Riley, Ronald; Wicks, John; Perry, Christopher

    2009-12-30

    The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian “Clinton” sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test (“Huff-n-Puff”) was conducted on a well in Stark County to test the injectivity in a “Clinton”-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day “soak” period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the “Clinton” sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test; (C) there was a subsequent

  11. Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Riley; John Wicks; Christopher Perry

    2009-12-30

    The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian 'Clinton' sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test ('Huff-n-Puff') was conducted on a well in Stark County to test the injectivity in a 'Clinton'-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day 'soak' period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the 'Clinton' sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test

  12. Report of DSM Application in Daqing Oil Field%大庆油田DSM技术实施情况报告

    Institute of Scientific and Technical Information of China (English)

    王振良; 秦家坤; 李晓钢

    2002-01-01

    @@ 1 Introduction to Daqing Oil Field electric network With 40 years' development of Daqing oil filed, the electric network has become the largest corporation electric network in China. In 1998, total electricity consumption added up to 10. 078 billions kwh. And network supply electricity is 6.233 billions kwh, which is 61.8% of total electricity. The self-generated electricity is 3.845 billions kwh, which is 38.2% of total electricity consumption.

  13. Impact Of The Oil Trade On The Global Economy And The Role Of Giant Fields In Predicting Supply

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, Wayne; Bishop, Richard

    2010-09-15

    Confusion about global oil supply ('peak oil') is a distraction from the economic issue of massive wealth transfer associated with oil trading and its potential to destabilize the world economy. Without an accurate forecast of oil volumes (resources, reserves and supply), timing and cost, there is no reliable way to model the consequences of the oil trade on the global economy. This paper illustrates why it is imperative to improve our understanding of the oil trade on the global economy and proposes a method of forecasting oil supply for input into a credible global economic model.

  14. Oil palm water use: calibration of a sap flux method and a field measurement scheme.

    Science.gov (United States)

    Niu, Furong; Röll, Alexander; Hardanto, Afik; Meijide, Ana; Köhler, Michael; Hendrayanto; Hölscher, Dirk

    2015-05-01

    Oil palm (Elaeis guineensis Jacq.) water use was assessed by sap flux density measurements with the aim to establish the method and derive water-use characteristics. Thermal dissipation probes were inserted into leaf petioles of mature oil palms. In the laboratory, we tested our set-up against gravimetric measurements and derived new parameters for the original calibration equation that are specific to oil palm petioles. In the lowlands of Jambi, Indonesia, in a 12-year-old monoculture plantation, 56 leaves on 10 palms were equipped with one sensor per leaf. A 10-fold variation in individual leaf water use among leaves was observed, but we did not find significant correlations to the variables trunk height and diameter, leaf azimuthal orientation, leaf inclination or estimated horizontal leaf shading. We thus took an un-stratified approach to determine an appropriate sampling design to estimate stand transpiration (Es, mm day(-1)) rates of oil palm. We used the relative standard error of the mean (SEn, %) as a measure for the potential estimation error of Es associated with sample size. It was 14% for a sample size of 13 leaves to determine the average leaf water use and four palms to determine the average number of leaves per palm. Increasing these sample sizes only led to minor further decreases of the SEn of Es. The observed 90-day average of Es was 1.1 mm day(-1) (error margin ± 0.2 mm day(-1)), which seems relatively low, but does not contradict Penman-Monteith-derived estimates of evapotranspiration. Examining the environmental drivers of Es on an intra-daily scale indicates an early, pre-noon maximum of Es rates (11 am) due to a very sensitive reaction of Es to increasing vapor pressure deficit in the morning. This early peak is followed by a steady decline of Es rates for the rest of the day, despite further rising levels of vapor pressure deficit and radiation; this results in pronounced hysteresis, particularly between Es and vapor pressure deficit.

  15. Increasing Waterflooding Reservoirs in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, Roy; Clarke, Don; Walker, Scott

    1999-11-09

    The objectives of this quarterly report was to summarize the work conducted under each task during the reporting period April - June 1998 and to report all technical data and findings as specified in the ''Federal Assistance Reporting Checklist''. The main objective of this project is the transfer of technologies, methodologies, and findings developed and applied in this project to other operators of Slope and Basin Clastic Reservoirs. This project will study methods to identify sands with high remaining oil saturation and to recomplete existing wells using advanced completion technology.

  16. Producing Light Oil from a Frozen Reservoir: Reservoir and Fluid Characterization of Umiat Field, National Petroleum Reserve, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Hanks, Catherine

    2012-12-31

    Umiat oil field is a light oil in a shallow, frozen reservoir in the Brooks Range foothills of northern Alaska with estimated oil-in-place of over 1 billion barrels. Umiat field was discovered in the 1940’s but was never considered viable because it is shallow, in the permafrost, and far from any transportation infrastructure. The advent of modern drilling and production techniques has made Umiat and similar fields in northern Alaska attractive exploration and production targets. Since 2008 UAF has been working with Renaissance Alaska Inc. and, more recently, Linc Energy, to develop a more robust reservoir model that can be combined with rock and fluid property data to simulate potential production techniques. This work will be used to by Linc Energy as they prepare to drill up to 5 horizontal wells during the 2012-2013 drilling season. This new work identified three potential reservoir horizons within the Cretaceous Nanushuk Formation: the Upper and Lower Grandstand sands, and the overlying Ninuluk sand, with the Lower Grandstand considered the primary target. Seals are provided by thick interlayered shales. Reserve estimates for the Lower Grandstand alone range from 739 million barrels to 2437 million barrels, with an average of 1527 million bbls. Reservoir simulations predict that cold gas injection from a wagon-wheel pattern of multilateral injectors and producers located on 5 drill sites on the crest of the structure will yield 12-15% recovery, with actual recovery depending upon the injection pressure used, the actual Kv/Kh encountered, and other geologic factors. Key to understanding the flow behavior of the Umiat reservoir is determining the permeability structure of the sands. Sandstones of the Cretaceous Nanushuk Formation consist of mixed shoreface and deltaic sandstones and mudstones. A core-based study of the sedimentary facies of these sands combined with outcrop observations identified six distinct facies associations with distinctive permeability

  17. Producing Light Oil from a Frozen Reservoir: Reservoir and Fluid Characterization of Umiat Field, National Petroleum Reserve, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Hanks, Catherine

    2012-12-31

    Umiat oil field is a light oil in a shallow, frozen reservoir in the Brooks Range foothills of northern Alaska with estimated oil-in-place of over 1 billion barrels. Umiat field was discovered in the 1940’s but was never considered viable because it is shallow, in the permafrost, and far from any transportation infrastructure. The advent of modern drilling and production techniques has made Umiat and similar fields in northern Alaska attractive exploration and production targets. Since 2008 UAF has been working with Renaissance Alaska Inc. and, more recently, Linc Energy, to develop a more robust reservoir model that can be combined with rock and fluid property data to simulate potential production techniques. This work will be used to by Linc Energy as they prepare to drill up to 5 horizontal wells during the 2012-2013 drilling season. This new work identified three potential reservoir horizons within the Cretaceous Nanushuk Formation: the Upper and Lower Grandstand sands, and the overlying Ninuluk sand, with the Lower Grandstand considered the primary target. Seals are provided by thick interlayered shales. Reserve estimates for the Lower Grandstand alone range from 739 million barrels to 2437 million barrels, with an average of 1527 million bbls. Reservoir simulations predict that cold gas injection from a wagon-wheel pattern of multilateral injectors and producers located on 5 drill sites on the crest of the structure will yield 12-15% recovery, with actual recovery depending upon the injection pressure used, the actual Kv/Kh encountered, and other geologic factors. Key to understanding the flow behavior of the Umiat reservoir is determining the permeability structure of the sands. Sandstones of the Cretaceous Nanushuk Formation consist of mixed shoreface and deltaic sandstones and mudstones. A core-based study of the sedimentary facies of these sands combined with outcrop observations identified six distinct facies associations with distinctive permeability

  18. Analysis of oil content and oil quality in oilseeds by low-field NMR; Analise do teor e da qualidade dos lipideos presentes em sementes de oleaginosas por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Constantino, Andre F.; Lacerda Junior, Valdemar; Santos, Reginaldo B. dos; Greco, Sandro J.; Silva, Renzo C.; Neto, Alvaro C.; Barbosa, Lucio L.; Castro, Eustaquio V.R. de [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Departamento de Quimica; Freitas, Jair C.C. [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Departamento de Fisica

    2014-07-01

    To choose among the variety of oleaginous plants for biodiesel production, the oil content of several matrices was determined through different low-field {sup 1}H nuclear magnetic resonance (NMR) experiments with varied pulse sequences, namely single-pulse, spin-echo, CPMG, and CWFP. The experiments that involved the first three sequences showed high correlation with each other and with the solvent extraction method. The quality of the vegetable oils was also evaluated on the basis of the existing correlation between the T{sub 2} values of the oils and their properties, such as viscosity, iodine index, and cetane index. These analyses were performed using HCA and PCA chemometric tools. The results were sufficiently significant to allow separation of the oleaginous matrices according to their quality. Thus, the low-field {sup 1}H NMR technique was confirmed as an important tool to aid in the selection of oleaginous matrices for biodiesel production. (author)

  19. Lithologic Framework Modeling of the Fruitvale Oil Field Investigating Interaction Between Wastewater Injection Wells and Usable Groundwater

    Science.gov (United States)

    Treguboff, E. W.; Crandall-Bear, A. T.

    2015-12-01

    The Fruitvale Oil Field lies in a populated area where oil production, water disposal injection wells, and drinking water wells lie in close proximity. The purpose of this project is to build a lithological framework of the area that can then be used to determine if water disposal from petroleum production has a chance of reaching usable groundwater aquifers. Using the DOGGR database, data were collected from well logs. Lithologic data from drilling logs and cores were coded and entered into a relational database, where it was combined with the surface elevation and location coordinates of each well. Elevation data was acquired through ArcGIS using a USGS 24k 10 m DEM. Drillers logs that started at the surface, and were continuous, were sorted by the density of intervals recorded, in order to select high quality drillers logs for use in creating a model. About 900 wells were coded and approximately 150 wells were used in the model. These wells were entered into the modeling program (Rockworks), which allowed the wells to be visualized as strip logs and also as cross sections, and 2D fence models were created to represent subsurface conditions. The data were interpolated into 3D models of the subsurface. Water disposal wells, with the depths of the perforation intervals as well as injection volume, were added to the model, and analyzed. Techniques of interpolation used in this project included kriging, which requires statistical analysis of the data collected. This allowed correlation between widely-spaced wells. Up scaling the data to a coarse or fine texture was also been found to be effective with the kriging technique. The methods developed on this field can be used to build framework models of other fields in the Central Valley to explore the relationship between water disposal injection and usable groundwater.

  20. 油田石油污染土壤微生物修复实验研究%Laboratory microbial remediation study of oil -contaminated soil in an oil field

    Institute of Scientific and Technical Information of China (English)

    刘小二; 张春生; 来亚芳; 郭东升; 杨鲁玉; 王红振

    2014-01-01

    In order to prevent and deal with the soil pollution caused by oil exploitation in an oil field,the effective degradation microbial communities, which were lab selective enrichment cultured from oil -contaminated soil of this oil field,was employed for microbial remediation experiments of oil -contaminated soil. Four methods affecting the degradation rate of oil for three soil samples of high,medium,low pollution concentration were observed under laboratory conditions,and the optimum processing methods for three soil samples were determined.The experimental results showed that the degradation rate of petroleum hydrocarbon for three soil samples in the optimal treatment method could reach 37.93% ~75.70% after 33 d bioremediation, indicating that the effective degradation microbial communities,cultivated in this experiment,can remediate the oil -contaminated soil of this oil field.This paper has discussed the feasibility of application of microbial remediation technique in this oil field.%为了有效预防和治理某油田因石油开发而造成的土壤污染,通过实验室选择性富集培养,从该油田石油污染土壤中筛选出了一组降解石油污染的优势菌群,开展石油污染土壤的微生物修复实验.在实验室条件下考察4种方法分别对高、中、低3种污染浓度的土壤样品的石油降解率的影响,确定出3种土壤样品的最佳处理方法.实验结果显示,3种土壤样品在最佳处理方法下,经过33 d 降解,其石油烃降解率可达37.93%~75.70%,说明本实验培养出的优势菌群能够对该油田的油污土壤进行修复,探索了该油田微生物修复技术应用的可行性.

  1. Fracture density determination using a novel hybrid computational scheme: a case study on an Iranian Marun oil field reservoir

    Science.gov (United States)

    Nouri-Taleghani, Morteza; Mahmoudifar, Mehrzad; Shokrollahi, Amin; Tatar, Afshin; Karimi-Khaledi, Mina

    2015-04-01

    Most oil production all over the world is from carbonated reservoirs. Carbonate reservoirs are abundant in the Middle East, the Gulf of Mexico and in other major petroleum fields that are regarded as the main oil producers. Due to the nature of such reservoirs that are associated with low matrix permeability, the fracture is the key parameter that governs the fluid flow in porous media and consequently oil production. Conventional methods to determine the fracture density include utilizing core data and the image log family, which are both time consuming and costly processes. In addition, the cores are limited to certain intervals and there is no image log for the well drilled before the introduction of this tool. These limitations motivate petroleum engineers to try to find appropriate alternatives. Recently, intelligent systems on the basis of machine learning have been applied to various branches of science and engineering. The objective of this study is to develop a mathematical model to predict the fracture density using full set log data as inputs based on a combination of three intelligent systems namely, the radial basis function neural network, the multilayer perceptron neural network and the least square supported vector machine. The developed committee machine intelligent system (CMIS) is the weighted average of the individual results of each expert. Proper corresponding weights are determined using a genetic algorithm (GA). The other important feature of the proposed model is its generalization capability. The ability of this model to predict data that have not been introduced during the training stage is very good.

  2. Cadmium bioaccumulation and gastric bioaccessibility in cacao: A field study in areas impacted by oil activities in Ecuador.

    Science.gov (United States)

    Barraza, F; Schreck, E; Lévêque, T; Uzu, G; López, F; Ruales, J; Prunier, J; Marquet, A; Maurice, L

    2017-10-01

    Cacao from South America is especially used to produce premium quality chocolate. Although the European Food Safety Authority has not established a limit for cadmium (Cd) in chocolate raw material, recent studies demonstrate that Cd concentrations in cacao beans can reach levels higher than the legal limits for dark chocolate (0.8 mg kg(-1), effective January 1st, 2019). Despite the fact that the presence of Cd in agricultural soils is related to contamination by fertilizers, other potential sources must be considered in Ecuador. This field study was conducted to investigate Cd content in soils and cacao cultivated on Ecuadorian farms in areas impacted by oil activities. Soils, cacao leaves, and pod husks were collected from 31 farms in the northern Amazon and Pacific coastal regions exposed to oil production and refining and compared to two control areas. Human gastric bioaccessibility was determined in raw cacao beans and cacao liquor samples in order to assess potential health risks involved. Our results show that topsoils (0-20 cm) have higher Cd concentrations than deeper layers, exceeding the Ecuadorian legislation limit in 39% of the sampling sites. Cacao leaves accumulate more Cd than pod husks or beans but, nevertheless, 50% of the sampled beans have Cd contents above 0.8 mg kg(-1). Root-to-cacao transfer seems to be the main pathway of Cd uptake, which is not only regulated by physico-chemical soil properties but also agricultural practices. Additionally, natural Cd enrichment by volcanic inputs must not be neglected. Finally, Cd in cacao trees cannot be considered as a tracer of oil activities. Assuming that total Cd content and its bioaccessible fraction (up to 90%) in cacao beans and liquor is directly linked to those in chocolate, the health risk associated with Cd exposure varies from low to moderate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Technical Proposal for Loading 3000 Gallon Crude Oil Samples from Field Terminal to Sandia Pressurized Tanker to Support US DOE/DOT Crude Oil Characterization Research Study

    Energy Technology Data Exchange (ETDEWEB)

    Lord, David; Allen, Raymond

    2016-10-01

    Sandia National Laboratories is seeking access to crude oil samples for a research project evaluating crude oil combustion properties in large-scale tests at Sandia National Laboratories in Albuquerque, NM. Samples must be collected from a source location and transported to Albuquerque in a tanker that complies with all applicable regulations for transportation of crude oil over public roadways. Moreover, the samples must not gain or lose any components, to include dissolved gases, from the point of loading through the time of combustion at the Sandia testing facility. In order to achieve this, Sandia designed and is currently procuring a custom tanker that utilizes water displacement in order to achieve these performance requirements. The water displacement procedure is modeled after the GPA 2174 standard “Obtaining Liquid Hydrocarbons Samples for Analysis by Gas Chromatography” (GPA 2014) that is used routinely by crude oil analytical laboratories for capturing and testing condensates and “live” crude oils, though it is practiced at the liter scale in most applications. The Sandia testing requires 3,000 gallons of crude. As such, the water displacement method will be upscaled and implemented in a custom tanker. This report describes the loading process for acquiring a ~3,000 gallon crude oil sample from commercial process piping containing single phase liquid crude oil at nominally 50-100 psig. This document contains a general description of the process (Section 2), detailed loading procedure (Section 3) and associated oil testing protocols (Section 4).

  4. Reservoir Modeling of Carbonate on Fika Field: The Challenge to Capture the Complexity of Rock and Oil Types

    Directory of Open Access Journals (Sweden)

    Erawati Fitriyani Adji

    2014-09-01

    Full Text Available DOI: 10.17014/ijog.v1i2.181The carbonate on Fika Field has a special character, because it grew above a basement high with the thickness and internal character variation. To develop the field, a proper geological model which can be used in reservoir simulation was needed. This model has to represent the complexity of the rock type and the variety of oil types among the clusters. Creating this model was challenging due to the heterogeneity of the Baturaja Formation (BRF: Early Miocene reef, carbonate platform, and breccia conglomerate grew up above the basement with a variety of thickness and quality distributions. The reservoir thickness varies between 23 - 600 ft and 3D seismic frequency ranges from 1 - 80 Hz with 25 Hz dominant frequency. Structurally, the Fika Field has a high basement slope, which has an impact on the flow unit layering slope. Based on production data, each area shows different characteristics and performance: some areas have high water cut and low cumulative production. Oil properties from several clusters also vary in wax content. The wax content can potentially build up a deposit inside tubing and flow-line, resulted in a possible disturbance to the operation. Five well cores were analyzed, including thin section and XRD. Seven check-shot data and 3D seismic Pre-Stack Time Migration (PSTM were available with limited seismic resolution. A seismic analysis was done after well seismic tie was completed. This analysis included paleogeography, depth structure map, and distribution of reservoir and basement. Core and log data generated facies carbonate distribution and rock typing, defining properties for log analysis and permeability prediction for each zone. An Sw prediction for each well was created by J-function analysis. This elaborates capillary pressure from core data, so it is very similar to the real conditions. Different stages of the initial model were done i.e. scale-up properties, data analysis, variogram modeling

  5. ADAPTIVE MANAGEMENT AND PLANNING MODELS FOR CULTURAL RESOURCES IN OIL & GAS FIELDS IN NEW MEXICO AND WYOMING

    Energy Technology Data Exchange (ETDEWEB)

    Peggy Robinson

    2005-07-01

    This report summarizes activities that have taken place in the last six (6) months (January 2005-June 2005) under the DOE-NETL cooperative agreement ''Adaptive Management and Planning Models for Cultural Resources in Oil and Gas Fields, New Mexico and Wyoming'' DE-FC26-02NT15445. This project examines the practices and results of cultural resource investigation and management in two different oil and gas producing areas of the United States: southeastern New Mexico and the Powder River Basin of Wyoming. The project evaluates how cultural resource investigations have been conducted in the past and considers how investigation and management could be pursued differently in the future. The study relies upon full database population for cultural resource inventories and resources and geomorphological studies. These are the basis for analysis of cultural resource occurrence, strategies for finding and evaluating cultural resources, and recommendations for future management practices. Activities can be summarized as occurring in either Wyoming or New Mexico. Gnomon as project lead, worked in both areas.

  6. A new experimental method to prevent paraffin - wax formation on the crude oil wells: A field case study in Libya

    Directory of Open Access Journals (Sweden)

    Elhaddad Elnori E.

    2015-01-01

    Full Text Available Wax formation and deposition is one of the most common problems in oil producing wells. This problem occurs as a result of the reduction of the produced fluid temperature below the wax appearance temperature (range between 46°C and 50°C and the pour point temperature (range between 42°C and 44°C. In this study, two new methods for preventing wax formation were implemented on three oil wells in Libya, where the surface temperature is, normally, 29°C. In the first method, the gas was injected at a pressure of 83.3 bar and a temperature of 65°C (greater than the pour point temperature during the gas-lift operation. In the second method, wax inhibitors (Trichloroethylene-xylene (TEX, Ethylene copolymers, and Comb polymers were injected down the casings together with the gas. Field observations confirmed that by applying these techniques, the production string was kept clean and no wax was formed. The obtained results show that the wax formation could be prevented by both methods.

  7. Isolation of a thermophilic and halophilic tyrosol-degrading Geobacillus from a Tunisian high-temperature oil field.

    Science.gov (United States)

    Chamkha, Mohamed; Mnif, Sami; Sayadi, Sami

    2008-06-01

    An aerobic, thermophilic, halotolerant and Gram-positive bacterium, designated strain C5, was isolated from a high-temperature oil field, located in Sfax, Tunisia, after enrichment on tyrosol. Strain C5 grew between 25 and 70 degrees C and optimally at 50 degrees C. It grew in the presence of 0-12% (w/v) NaCl, with optimum growth at 3% (w/v) NaCl. Strain C5 was able to degrade tyrosol aerobically, in the presence of 30 g L(-1) NaCl and under warm conditions (55 degrees C). The degradation of tyrosol proceeded via p-hydroxyphenylacetic and 3,4-dihydroxyphenylacetic acids. The products were confirmed by HPLC and GC-MS analyses. Strain C5 was also found to degrde a wide range of other aromatic compounds, including benzoic, p-hydroxybenzoic, protocatechuic, vanillic, p-hydroxyphenylacetic, 3,4-dihydroxyphenylacetic, cinnamic and ferulic acids, phenol and m-cresol. Moreover, strain C5 was grown on diesel and crude oil as sole carbon and energy sources. Strain C5 was also able to utilize several carbohydrates. Phenotypic characteristics and phylogenetic analysis of the 16S rRNA gene sequence of strain C5 revealed that it was related to members of the genus Geobacillus, being most closely related to the type strain of G. pallidus (99% sequence similarity). In addition, we report on growth of the type strain of G. pallidus on different aromatic compounds and hydrocarbons.

  8. Management of Drilling Cuttings in Term of Volume and Economics in Oil Field

    Directory of Open Access Journals (Sweden)

    Dr. Biltayib.M.

    2016-10-01

    Full Text Available The process of drilling oil and gas wells generates large volumes of drill cuttings and spent muds. The American Petroleum Institute estimated that about 150 million barrels of drilling waste was generated yearly from onshore wells in the United States alone. Of the total drilling waste, approximately 50% is solid drilling waste. The biggest contributors of drilling wastes are drilling cuttings and mud. Reducing the drilling fluids not only it reduces the waste volume, but it also reduces the environmental effects associated with it. The main purpose of drilling waste management is to find to ways by which the generation of waste can be controlled to minimize or eliminate its negative impact on the environment. Minimizing waste is always the priority, however, it not always the most cost-effective solution. The objective of this report is t

  9. Approaching viscosity control: electrical heating of extra heavy oil as alternative to diluent injection in down hole in Cerro Negro Field, Faja Petrolifera del Orinoco

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, Manuel [Petroleos de Venezuela SA, PDVSA (Venezuela)

    2011-07-01

    Electrical heating is a method used to enhance oil recovery in extra heavy oil reservoirs. This method can be used when diluent injection or other methods are not able to reduce oil viscosity sufficiently or when problems of product quality or quantity arise. The aim of this paper is to evaluate the performance of electrical heating, individually and simultaneously with injection of diluents. For this purpose, simulations were undertaken in one well with integrated electrical heating and diluent injection in Cerro Negro Field in the Orinoco oil belt, Venezuela. Results have shown that the application of both methods together is more profitable than the application of electrical heating alone. This paper demonstrated that the use of electrical heating and diluent injection combined is a valid alternative to diluent injection alone, reducing production loss.

  10. Five years of gas flaring by country, oil field or flare observed by the Suomi NPP satellite

    Science.gov (United States)

    Zhizhin, M. N.; Elvidge, C.; Baugh, K.; Hsu, F. C.

    2016-12-01

    We will present a new methodology and the resulting interactive map and statistical estimates of flared gas volumes in 2012-2016 using multispectral infrared images from VIIRS radiometer at the Suomi NPP satellite. The high temperature gas flares are detected at the night side of the Earth with the Nightfire algorithm. Gas flares are distinct from biomass burning and industrial heat sources because they have higher temperatures. Sums of the radiative heat from the detected flares are calibrated with country-level flared volumes reported by CEDIGAZ. Statistical analysis of the database with accumulated 5 years of the Nightfire detections makes it possible to estimate instant flow rate for an individual flare, as well as integral flared volumes and long term trends for all the countries or oil and gas fields.

  11. ADAPTIVE MANAGEMENT AND PLANNING MODELS FOR CULTURAL RESOURCES IN OIL & GAS FIELDS IN NEW MEXICO AND WYOMING

    Energy Technology Data Exchange (ETDEWEB)

    Peggy Robinson

    2004-07-01

    This report contains a summary of activities of Gnomon, Inc. and five subcontractors that have taken place during the first six months of 2004 (January 1, 2004-June 30, 2004) under the DOE-NETL cooperative agreement: ''Adaptive Management and Planning Models for Cultural Resources in Oil & Gas Fields in New Mexico and Wyoming'', DE-FC26-02NT15445. Although Gnomon and all five subcontractors completed tasks during these six months, most of the technical experimental work was conducted by the subcontractor, SRI Foundation (SRIF). SRIF created a sensitivity model for the Azotea Mesa area of southeastern New Mexico that rates areas as having a very good chance, a good chance, or a very poor chance of containing cultural resource sites. SRIF suggested that the results of the sensitivity model might influence possible changes in cultural resource management (CRM) practices in the Azote Mesa area of southeastern New Mexico.

  12. ADAPTIVE MANAGEMENT AND PLANNING MODELS FOR CULTURAL RESOURCES IN OIL & GAS FIELDS IN NEW MEXICO AND WYOMING

    Energy Technology Data Exchange (ETDEWEB)

    Peggy Robinson

    2004-01-01

    This report contains a summary of activities of Gnomon, Inc. and five subcontractors that have taken place during the second six months (July 1, 2003-December 31, 2003) under the DOE-NETL cooperative agreement: ''Adaptive Management and Planning Models for Cultural Resources in Oil & Gas Fields in New Mexico and Wyoming'', DE-FC26-02NT15445. Although Gnomon and all five subcontractors completed tasks during these six months, most of the technical experimental work was conducted by the subcontractor, SRI Foundation (SRIF). SRIF created a sensitivity model for the Loco Hills area of southeastern New Mexico that rates areas as having a very good chance, a good chance, or a very poor chance of containing cultural resource sites. SRIF suggested that the results of the sensitivity model might influence possible changes in cultural resource management (CRM) practices in the Loco Hills area of southeastern New Mexico.

  13. 中国油田服务企业海外投资研究%Research onOverseas Investment of Chinese Oil Field Service Enterprises

    Institute of Scientific and Technical Information of China (English)

    宋琛

    2016-01-01

    中国油田服务企业多数具有比较清晰的海外业务发展战略,从初期的海外设点、技术跟进,到全球业务布局,乃至资源收购等,但与国外油田服务企业,特别是发达国家的大型油田服务企业的海外业务拓展力度相比,中国企业仍存在诸如国际化程度低、技术水平落后、产业集中化程度低、企业组织制度不健全等问题.因此,中国油田服务企业应"走出去",积极开拓海外石油市场,打造一体化的大型油田服务公司、加强技术创新以及不断提高人才素质.%Most of Chinese oil field service enterprises have a relatively clear strategy for overseas business development: from the beginning branches abroad and and technical follow up to global business layout and resource acquisition. But compared with the overseas business development efforts of foreign oil field service enterprises, especially the large oil field service enterprises in developed countries, Chinese enterprises still have many problems, such as low degree of internationalization, lagging technical level, low industrial concentration and enterprise organization system is not perfect. So, Chinese oil field service enterprises should go out, actively explore overseas oil market, build a large oil field in the integration of Service Corporation, strengthen technological innovation and continuously improve the quality of talents.

  14. Economic benefits of carbon isotope fingerprint-logs used to determine source depths of migrating gas in heavy oil fields of Alberta and Saskatchewan

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, D.; Muehlenbachs, K. [Alberta Univ., Edmonton, AB (Canada); Jensen, E. [Amoco Canada Petroleum Co. Ltd., Calgary, AB (Canada)

    1998-09-01

    A method by which to identify the sources of gas migration from wells in heavy oil reservoirs was presented. Natural gas migration to surface presents an environmental and financial liability in oil fields in Alberta and Saskatchewan, particularly in those fields that have very close well spacings. Traditional geophysical or logging techniques have been unable to identify the source of these undesired gas emissions. This study showed that the problem does not originate from the heavy oil reservoirs, but from the shallower overlying shales. In this study, isotopic profiles of gases extracted from drilling muds were used to identify two gas sources and their depth. The gases associated with heavy oils originated as thermal cracking products. The shale gases are a mixture of bacterial methane and traces of ethane, propane and butane produced by incipient thermal cracking. Carbon isotope fingerprint logs in heavy oil fields were found to be useful in assessing potential environmental risks and ensure that remedial efforts are more cost efficient. 2 figs.

  15. Ex situ bioremediation of a soil contaminated by mazut (heavy residual fuel oil)--a field experiment.

    Science.gov (United States)

    Beškoski, Vladimir P; Gojgić-Cvijović, Gordana; Milić, Jelena; Ilić, Mila; Miletić, Srdjan; Solević, Tatjana; Vrvić, Miroslav M

    2011-03-01

    Mazut (heavy residual fuel oil)-polluted soil was exposed to bioremediation in an ex situ field-scale (600 m(3)) study. Re-inoculation was performed periodically with biomasses of microbial consortia isolated from the mazut-contaminated soil. Biostimulation was conducted by adding nutritional elements (N, P and K). The biopile (depth 0.4m) was comprised of mechanically mixed polluted soil with softwood sawdust and crude river sand. Aeration was improved by systematic mixing. The biopile was protected from direct external influences by a polyethylene cover. Part (10 m(3)) of the material prepared for bioremediation was set aside uninoculated, and maintained as an untreated control pile (CP). Biostimulation and re-inoculation with zymogenous microorganisms increased the number of hydrocarbon degraders after 50 d by more than 20 times in the treated soil. During the 5 months, the total petroleum hydrocarbon (TPH) content of the contaminated soil was reduced to 6% of the initial value, from 5.2 to 0.3 g kg(-1) dry matter, while TPH reduced to only 90% of the initial value in the CP. After 150 d there were 96%, 97% and 83% reductions for the aliphatic, aromatic, and nitrogen-sulphur-oxygen and asphaltene fractions, respectively. The isoprenoids, pristane and phytane, were more than 55% biodegraded, which indicated that they are not suitable biomarkers for following bioremediation. According to the available data, this is the first field-scale study of the bioremediation of mazut and mazut sediment-polluted soil, and the efficiency achieved was far above that described in the literature to date for heavy fuel oil.

  16. An indicator to evaluate the environmental Impact of olive oil waste water’s shedding on cultivated fields

    Directory of Open Access Journals (Sweden)

    Nicola Silvestri

    Full Text Available Several climatic, soil and topographic factors need to be considered when evaluating the impact of human actions on the environment. Such variables may be related in a complex way to environmental impact, thus making its evaluation difficult. Problems of this type emerge when evaluating the risks olive oil waste water pose to the environment when shed on cultivated soils. This paper proposes a fuzzy expert system to calculate a modular indicator, ICARO, which allows an evaluation of the potential environmental impact of the application of olive oil waste water in a field. Five modules were formulated, one (“Waste water” reflecting the nature of the waste water, two (“Groundwater”, “Surface water” reflecting the risk for the most sensitive agro-environmental compartments (groundwater, surface water, one (“Crop” reflecting possible consequences on the cropping system adopted, and one (“Soil” reflecting the soil aptitude to receive waste waters.The input variables are therefore waste water amount and properties, site-specific conditions, and characteristics of the application considered. For each input variable, two functions describing membership to the fuzzy subsets Favorable (F and Unfavorable (U have been defined. The expert system calculates the value of each module according to both the degree of membership of the input variables to the subsets F and U, and a set of decision rules. The five modules can be considered individually or can be aggregated (again according to level of membership to fuzzy subsets F and U and a set of decision rules into the synthetic indicator ICARO. Outcomes of a sensitivity analysis are presented. The system is flexible and can be used as a decision aid tool to authorize waste water’s shedding or subordinate the distribution on fields to acceptance of some limitations (amount, timing, site, etc.

  17. Electrofacies vs. lithofacies sandstone reservoir characterization Campanian sequence, Arshad gas/oil field, Central Sirt Basin, Libya

    Science.gov (United States)

    Burki, Milad; Darwish, Mohamed

    2017-06-01

    The present study focuses on the vertically stacked sandstones of the Arshad Sandstone in Arshad gas/oil field, Central Sirt Basin, Libya, and is based on the conventional cores analysis and wireline log interpretation. Six lithofacies types (F1 to F6) were identified based on the lithology, sedimentary structures and biogenic features, and are supported by wireline log calibration. From which four types (F1-F4) represent the main Campanian sandstone reservoirs in the Arshad gas/oil field. Lithofacies F5 is the basal conglomerates at the lower part of the Arshad sandstones. The Paleozoic Gargaf Formation is represented by lithofacies F6 which is the source provenance for the above lithofacies types. Arshad sediments are interpreted to be deposited in shallow marginal and nearshore marine environment influenced by waves and storms representing interactive shelf to fluvio-marine conditions. The main seal rocks are the Campanian Sirte shale deposited in a major flooding events during sea level rise. It is contended that the syn-depositional tectonics controlled the distribution of the reservoir facies in time and space. In addition, the post-depositional changes controlled the reservoir quality and performance. Petrophysical interpretation from the porosity log values were confirmed by the conventional core measurements of the different sandstone lithofacies types. Porosity ranges from 5 to 20% and permeability is between 0 and 20 mD. Petrophysical cut-off summary of the lower part of the clastic dominated sequence (i. e. Arshad Sandstone) calculated from six wells includes net pay sand ranging from 19.5‧ to 202.05‧, average porosity from 7.7 to 15% and water saturation from 19 to 58%.

  18. Development of heavy oil fields onshore and offshore: resemblances and challenges; Desenvolvimento de campos de oleos pesados em terra e em mar: semelhancas e desafios

    Energy Technology Data Exchange (ETDEWEB)

    Branco, Celso Cesar Moreira; Moczydlower, Priscila [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2008-07-01

    The so called offshore heavy oils (API gravity lower than 19) and extra heavy oils (API lower than 10) are receiving increasing importance due to the light oil production decline and also to exploration difficulties. In countries like Canada, Venezuela, China and the US (California) there are immense onshore heavy oil resources sometimes classified as non conventional. Differently in Brazil, onshore heavy oil volumes are modest being important those located in offshore fields (although non comparable to the Canadian and Venezuelan ones). The issue raised in this paper is: the field location, whether onshore or offshore, is always the main constraint in the development process? Well, the question has both a 'yes' and 'no' as an answer. There are important differences but some similarities in the technologies that can be applied. In this text the authors intend to explore this point while at the same time depicting some of the main related aspects under research for proper exploitation of heavy and extra heavy oil assets. The most relevant difference between onshore and offshore heavy oil fields is the application of thermal methods for improved recovery: while worldwide spread and commercially applied to onshore fields, steam injection is not yet viable for offshore operations. The only option for improving recovery in offshore fields is water injection, which has the drawback of producing large volumes of water during the field life. Another aspect is the cost of the production wells: much cheaper onshore they allow well spacing in the order of 100 m or even 50 m whereas in offshore well spacing are in the 1000 m range. From the flow assurance point of view, inland installations can take use of solvents for heavy oil dilution, such as diesel or naphtha. Offshore this option is complicated by the long distances from the wellheads to the producing facilities in the platform, in the case of wet completions. There are also differences regarding the

  19. Generalized Representation of Oil and Gas Fields in Southern Louisiana [slafldsg

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The polygons representing fields were created by constructing a grid of ¼ sq. mi. cells and proximal polygons centered on all wells in southern Louisiana and then...

  20. Well selection in depleted oil and gas fields for a safe CO2 storage practice: A case study from Malaysia

    Directory of Open Access Journals (Sweden)

    Arshad Raza

    2017-03-01

    Full Text Available Carbon capture and sequestration technology is recognized as a successful approach taken to mitigate the amount of greenhouse gases released into the atmosphere. However, having a successful storage practice requires wise selection of suitable wells in depleted oil or gas fields to reduce the risk of leakage and contamination of subsurface resources. The aim of this paper is to present a guideline which can be followed to provide a better understanding of sophisticated wells chosen for injection and storage practices. Reviewing recent studies carried out on different aspects of geosequestration indicated that the fracture pressure of seals and borehole conditions such as cement-sheath integrity, distance from faults and fractures together with the depth of wells are important parameters, which should be part of the analysis for well selection in depleted reservoirs. A workflow was then designed covering these aspects and it was applied to a depleted gas field in Malaysia. The results obtained indicated that Well B in the field may have the potential of being a suitable conduit for injection. Although more studies are required to consider other aspects of well selections, it is recommended to employ the formation integrity analysis as part of the caprock assessment before making any decisions.

  1. Potential for Carbon Dioxide Sequestration and Enhanced Oil Recovery in the Vedder Formation, Greeley Field, San Joaquin Valley, California.

    Science.gov (United States)

    Jameson, S.

    2015-12-01

    Most scientists agree that greenhouse gases (GHG) such as carbon dioxide (CO2), Methane (CH4), and nitrous oxide (N2O) are major contributors to the global warming trend and climate change. One effort to mitigate anthropogenic sourced CO2 is through carbon capture and sequestration. Depleted oil and gas reservoirs due to their known trapping capability, in-place infrastructure, and proximity to carbon emission sources are good candidates for possible CO2 storage. The Vedder formation is one of three reservoirs identified in the San Joaquin Basin that meets standards for possible storage. An analysis of net fluid production data (produced minus injected) from discovery to the present is used to determine the reservoir volume available for CO2 storage. Data regarding reservoir pressure response to injection and production of fluids include final shut-in pressures from drill stem test, static bottom-hole pressure measurements from well completion histories, and idle well fluid level measurements for recent pressure data. Proprietary experimental pressure, volume and temperature data (PVT), gas oil ratios (GOR), well by well permeability, porosity, and oil gravity, and relative permeability and perforation intervals are used to create static and dynamic multiphase fluid flow models. All data collected was logged and entered into excel spreadsheets and mapping software to create subsurface structure, reservoir thickness and pressure maps, cross sections, production/injection charts on a well-by-well basis, and both static and dynamic flow models. This data is used to determine storage capacity and the amount of pressure variance within the field to determine how the reservoir will react to CO2 injection and to gain insight into the subsurface fluid movement of CO2. Results indicate a homogenous field with a storage capacity of approximately 26 Million Metric Tons of CO2. Analysis of production by stream and pressure change through time indicates a strong water drive

  2. New designed device allows significant savings in PCP completions, in the Zuata Field, Junin block of the Orinoco oil belt, Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Busto, T.; Brunings, C. [PDVSA (Venezuela); Grisoni, J. [TIET, C.A. (Venezuela)

    2011-07-01

    In the Zuata principal field in the Orinoco oil belt, PDVSA has implemented a new device named FMB-TIET. This device is a retrievable mechanically activated tool designed with a torque anchor which converts a tubular PCP into an insertable PCP. In the Zuata principal field, the insertable PCPs have been used since 2001 but, given the intent of PDVSA to increase its oil production rates and decrease its operational expenditure, the FMB-TIET device was tried in well ZPZ0047 in February, 2010. This implementation along with Flush by unit resulted in a considerable saving: the operational expenditure for replacement service was reduced by 63%, rig time was reduced by two days and production delays were also reduced by two days. The test of the FMB-TIET device in one well of the Orinoco oil belt has proved to be successful and PDVSA is planning to install twenty devices in the short term.

  3. Improved Oil Recovery from Upper Jurassic Smackover Carbonates through the Application of Advanced Technologies at Womack Hill Oil Field, Choctaw and Clarke Counties, Alabama, Eastern Gulf Coastal Plan (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini; Joe Benson; David Hilton; David Cate; Lewis Brown

    2006-05-29

    The principal research efforts for Phase II of the project were drilling an infill well strategically located in Section 13, T. 10 N., R. 2 W., of the Womack Hill Field, Choctaw and Clarke Counties, Alabama, and obtaining fresh core from the upper Smackover reservoir to test the feasibility of implementing an immobilized enzyme technology project in this field. The Turner Land and Timber Company 13-10 No. 1 well was successfully drilled and tested at a daily rate of 132 barrels of oil in Section 13. The well has produced 27,720 barrels of oil, and is currently producing at a rate of 60 barrels of oil per day. The 13-10 well confirmed the presence of 175,000 barrels of attic (undrained) oil in Section 13. As predicted from reservoir characterization, modeling and simulation, the top of the Smackover reservoir in the 13-10 well is structurally high to the tops of the Smackover in offsetting wells, and the 13-10 well has significantly more net pay than the offsetting wells. The drilling and testing of the 13-10 well showed that the eastern part of the field continues to have a strong water drive and that there is no need to implement a pressure maintenance program in this part of the Womack Hill Field at this time. The success achieved in drilling and testing the 13-10 infill well demonstrates the benefits of building a geologic model to target areas in mature fields that have the potential to contain undrained oil, thus increasing the productivity and profitability of these fields. Microbial cultures that grew at 90 C and converted ethanol to acid were recovered from fresh cuttings from the Smackover carbonate reservoir in an analogous field to the Womack Hill Field in southwest Alabama; however, no viable microorganisms were found in the Smackover cores recovered from the drilling of the 13-10 well in Womack Hill Field. Further evaluation is, therefore, required prior to implementing an immobilized enzyme technology project in the Womack Hill Field.

  4. High temperature annealing of fission tracks in fluorapatite, Santa Fe Springs oil field, Los Angeles Basin, California

    Science.gov (United States)

    Naeser, Nancy D.; Crowley, Kevin D.; McCulloh, Thane H.; Reaves, Chris M.; ,

    1990-01-01

    Annealing of fission tracks is a kinetic process dependent primarily on temperature and to a laser extent on time. Several kinetic models of apatite annealing have been proposed. The predictive capabilities of these models for long-term geologic annealing have been limited to qualitative or semiquantitative at best, because of uncertainties associated with (1) the extrapolation of laboratory observations to geologic conditions, (2) the thermal histories of field samples, and (3) to some extent, the effect of apatite composition on reported annealing temperatures. Thermal history in the Santa Fe Springs oil field, Los Angeles Basin, California, is constrained by an exceptionally well known burial history and present-day temperature gradient. Sediment burial histories are continuous and tightly constrained from about 9 Ma to present, with an important tie at 3.4 Ma. No surface erosion and virtually no uplift were recorded during or since deposition of these sediments, so the burial history is simple and uniquely defined. Temperature gradient (???40??C km-1) is well established from oil-field operations. Fission-track data from the Santa Fe Springs area should thus provide one critical field test of kinetic annealing models for apatite. Fission-track analysis has been performed on apatites from sandstones of Pliocene to Miocene age from a deep drill hole at Santa Fe Springs. Apatite composition, determined by electron microprobe, is fluorapatite [average composition (F1.78Cl0.01OH0.21)] with very low chlorine content [less than Durango apatite; sample means range from 0.0 to 0.04 Cl atoms, calculated on the basis of 26(O, F, Cl, OH)], suggesting that the apatite is not unusually resistant to annealing. Fission tracks are preserved in these apatites at exceptionally high present-day temperatures. Track loss is not complete until temperatures reach the extreme of 167-178??C (at 3795-4090 m depth). The temperature-time annealing relationships indicated by the new data

  5. Effects of Operating Pressure on Energy-saving of Water Recycling Utilization with MVR system in Oil Extraction Fields

    OpenAIRE

    Li, Liansheng; Zhao, Yuanyang; Wang, Le; Xiao, Jun; Yang, Qichao; Liu, Guangbin; Tang, Bin

    2015-01-01

    One of the most effective methods for the extraction of crude oil with high viscosity is injecting high temperature water vapor to the oil well. To save water consumption and achieve zero discharge, it is needed to separate and purify the water, which is mixed with oil, mud and other impurities. In this paper, the mechanical vapor recompression (MVR) system is analyzed and the parameters for analysis are based on a demonstration project on water recycling utilization in the Karamay crude oil ...

  6. Rock physics for 4D modeling of heavy oil sands in Petromonagas field

    Energy Technology Data Exchange (ETDEWEB)

    Florez-Nino, J.M. [BP America Inc., Houston, TX (United States); Vega, V. [BP Andean, Caracas (Venezuela, Bolivarian Republic of)

    2009-07-01

    Seismic reservoir characterization and monitoring requires a good understanding of the many factors that influence the elastic properties of reservoir rocks, as well as the changes in elastic properties induced by reservoir production, such as those derived from variations in pressure, temperature, or reservoir porosity and saturation. This understanding can be obtained from a both rock physics modeling and direct laboratory measurements. This paper presented a rock physics analysis carried out to integrate well-log and seismic data for reservoir characterization and forward modeling of four-dimensional seismic response in heavy oil sands. The paper also presented an evaluation of the seismic response related to thermal recovery, including an analysis that accounted for frequency-dependant p-wave velocity dispersion; highly viscous fluid; temperature effects on fluid properties; and pressure effects on rock properties. It was concluded that p-wave and shear-wave velocity variation as a function of temperature are the dominant factors to consider while integrating well-log and seismic data in sands of the Morichal members of the Oficina formation in Venezuela. 6 refs., 9 figs.

  7. Study on detailed geological modelling for fluvial sandstone reservoir in Daqing oil field

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Hanqing; Fu Zhiguo; Lu Xiaoguang [Institute of Petroleum Exploration and Development, Daqing (China)

    1997-08-01

    Guided by the sedimentation theory and knowledge of modern and ancient fluvial deposition and utilizing the abundant information of sedimentary series, microfacies type and petrophysical parameters from well logging curves of close spaced thousands of wells located in a large area. A new method for establishing detailed sedimentation and permeability distribution models for fluvial reservoirs have been developed successfully. This study aimed at the geometry and internal architecture of sandbodies, in accordance to their hierarchical levels of heterogeneity and building up sedimentation and permeability distribution models of fluvial reservoirs, describing the reservoir heterogeneity on the light of the river sedimentary rules. The results and methods obtained in outcrop and modem sedimentation studies have successfully supported the study. Taking advantage of this method, the major producing layers (PI{sub 1-2}), which have been considered as heterogeneous and thick fluvial reservoirs extending widely in lateral are researched in detail. These layers are subdivided into single sedimentary units vertically and the microfacies are identified horizontally. Furthermore, a complex system is recognized according to their hierarchical levels from large to small, meander belt, single channel sandbody, meander scroll, point bar, and lateral accretion bodies of point bar. The achieved results improved the description of areal distribution of point bar sandbodies, provide an accurate and detailed framework model for establishing high resolution predicting model. By using geostatistic technique, it also plays an important role in searching for enriched zone of residual oil distribution.

  8. Seasonal variations of microbial community in a full scale oil field produced water treatment plant

    Directory of Open Access Journals (Sweden)

    Q. Xie

    2016-01-01

    Full Text Available This study investigated the microbial community in a full scale anaerobic baffled reactor and sequencing batch reactor system for oil-produced water treatment in summer and winter. The community structures of fungi and bacteria were analyzed through polymerase chain reaction–denaturing gradient gel electrophoresis and Illumina high-throughput sequencing, respectively. Chemical oxygen demand effluent concentration achieved lower than 50 mg/L level after the system in both summer and winter, however, chemical oxygen demand removal rates after anaerobic baffled reactor treatment system were significant higher in summer than that in winter, which conformed to the microbial community diversity. Saccharomycotina, Fusarium, and Aspergillus were detected in both anaerobic baffled reactor and sequencing batch reactor during summer and winter. The fungal communities in anaerobic baffled reactor and sequencing batch reactor were shaped by seasons and treatment units, while there was no correlation between abundance of fungi and chemical oxygen demand removal rates. Compared to summer, the total amount of the dominant hydrocarbon degrading bacteria decreased by 10.2% in anaerobic baffled reactor, resulting in only around 23% of chemical oxygen demand was removed in winter. Although microbial community significantly varied in the three parallel sulfide reducing bacteria, the performance of these bioreactors had no significant difference between summer and winter.

  9. Molecular phylogenetical studies of the thermophilic spore-forming desulfotomaculum isolated from oil-field

    Institute of Scientific and Technical Information of China (English)

    Chen Wu; Li Chunyan; Xiang Fu; Yu Longjiang

    2005-01-01

    A novel thermophilic and heterotrophic sulfate-reducing bacteria, strain CW-03, was isolated from crude oil well whose depth was 3.2 kilometer. The bacterium was strictly anaerobic; it does not endure acid and itsmaximum surviving temperature was 70℃. Many short chain organic compounds can be utilized as electron donors, which were acetate, formate, lactate, propionate, pyruvate, butyrate, succinate, malate, fumarate,valerate, caproate, heptanoate, octanoate, decanoate, tridecanoate, pentadecanoate, palmitate, heptadecanoate or ethanol, while sulfate and sulfite were used as electron acceptors. The following substrates were not utilized: benzoate undecanoate, dodecanoate, tetradecane, propanol, butanol, H2+CO2 (80/20%; v/v) and acetate (1mM)+ H2. When lactate was used as electron donors, sulfite and thiosulfate, but not sulfer and nitrate, can be used as electron acceptors. Strain CW-03 was motile, curved rod, Gram-positive, pole flagellum and spore-forming. On the basis of 16S rRNA sequence alignment (accession numbers: AY703032), CW-03 should be included in the genus Desulfotomaculum with BIAST analysis on line. However, some of its physiology and multiple sequence alignments were different from other members of this genus. Therefore, CW-03 should be recognized as a new species, for which we propose the name Desulfotomaculum chinamiddle (Bacteria, Firmicutes, Clostridia, Clostridiales, Peptococcaceae).

  10. Water saturation on Albian carbonates reservoirs—ancient Brazilian oil fields

    Science.gov (United States)

    Castillo Vincentelli, Maria Gabriela; António Caceres Contreras, Sergio

    2016-12-01

    One of the main objectives for petroleum exploration is to quantify the reservoir’s oil in place; usually this process is based on a petrophysical evaluation that, among other parameters, the reservoir water saturation (S w) must be calculated, because it represents the main factor for determining hydrocarbon saturation (S h). Classical petrophysical analysis includes the use of the water saturation’s resistivity (R w) and two main constants (for Archie saturation), as well as cementation (m) and tortuosity (a); both of which are obtained from laboratory plug/cores measurements. However, in the case of ancient Albian carbonate reservoirs (Brazil), this kind of data is not available for a fully water saturated reservoir, and as a consequence, we proposed to apply a logarithmic graphic solution of the main Archie’s equations to determine these main factors using a linear regression based on wire logs. As result, an R w was confirmed at 127 Kppm of NaCl for Quissamã Formation, m  =  1.071 and a  =  0.87. Finally, the value of ‘m’ is more affected by the pore and size configuration, and the ‘a’ value appears to be a logical answer for carbonates reservoir with high porosity.

  11. Case report: Profound neurobehavioral deficits in an oil field worker overcome by hydrogen sulfide

    Energy Technology Data Exchange (ETDEWEB)

    Kilburn, K.H. (Univ. of Southern California, Los Angeles (United States))

    1993-11-01

    A 24-year-old oil well tester was rendered semiconscious by hydrogen sulfide (H2S). He received oxygen and was hospitalized but released in 30 minutes. The next day, nausea, vomiting, diarrhea, and incontinence of urine and stool led to rehospitalization. These problems and leg shaking, dizziness, sweating, trouble sleeping, and nightmares prevented his return to work. A physical examination, chest x-ray, and pulmonary function tests were normal 39 months after the episode but vibration sense was diminished. Two choice visual reaction times were delayed. Balance was highly abnormal (5 to 6 cm/sec) with eyes closed. Blink reflex latency was slow (R-1 17.5 msec versus normal 14.3 msec). Numbers written on finger tips were not recognized. Verbal and visual recall were impaired but overlearned memory was intact. Cognitive functions measured by Culture Fair, block design, and digit symbol were impaired. Perceptual motor was slow. Scores for confusion, tension-anxiety, depression, and fatigue were elevated and vigor was reduced. Forty-nine months after exposure his reaction time, sway speed, and color vision had not improved. His recall and his cognitive, constructional, and psychomotor speeds had improved but remained abnormal. These deficits are most likely due to H2S. Similar testing of other survivors is recommended.

  12. Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 82, quarterly report, January--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    This document consists of a list of projects supporting work on oil recovery programs. A publications list and index of companies and institutions is provided. The remaining portion of the document provides brief descriptions on projects in chemical flooding, gas displacement, thermal recovery, geoscience, resource assessment, and reservoir class field demonstrations.

  13. Proposal for the risk management implementation phase in oil field development project by adding value on the refurbishment of critical equipment

    Directory of Open Access Journals (Sweden)

    Hamid Abdul

    2017-01-01

    Full Text Available Refurbishment process is a conceptual stage in product life cycle. It is utilized in existing equipment in the field by adding value to recondition and repaired equipment. The main interest of this paper is to implement and design risk management implementation phase in oil field development project on the refurbishment of critical equipment in oil and gas industry. This paper is provided base on research and experiences in risk management and learned from practical team in industry which matched by an application in oil field development project in refurbishment of critical equipment. A framework of implementation phase for risk management in oil field development project in refurbishment critical equipment were reviewed and added value on communication skills of the project team to the stakeholder and organization, which support to external body and vice-versa. Risk management framework can be used for reference of refurbishment process with simply process and developed with same concept for the next wide development project in industry.

  14. CO2 storage capacity of campos Basin’s oil field in Brazi

    NARCIS (Netherlands)

    Camboim Rockett, G.; Medina Ketzer, M.; Ramirez, C.A.; van den Broek, M.A.

    2013-01-01

    Large potentials for CO2 storage were demonstrated in previous studies in Brazil. This study aims to estimate the CO2 storage capacity in the Campos Basin , Southeast Brazil, in order to provide refined values to support CCS planning in the country. The results, based on field/reservoir level data s

  15. Uses of permanent plugging agent imp-op-301, polyacrylamide base, in oil-field production

    Energy Technology Data Exchange (ETDEWEB)

    Islas S, C.; Ledesma S, A.

    1974-10-01

    Due to its chemical and physical properties, the use of synthetic polymer gels has recently become an important auxiliary tool in petroleum production techniques. This paper described the properties of a new permanent plugging agent (IMP-OP-301), as well as the description of laboratory evaluation tests and some possible field applications of this acrylamide base product. (10 refs.)

  16. CO2 storage capacity of campos Basin’s oil field in Brazi

    NARCIS (Netherlands)

    Camboim Rockett, G.; Medina Ketzer, M.; Ramirez, C.A.; van den Broek, M.A.

    2013-01-01

    Large potentials for CO2 storage were demonstrated in previous studies in Brazil. This study aims to estimate the CO2 storage capacity in the Campos Basin , Southeast Brazil, in order to provide refined values to support CCS planning in the country. The results, based on field/reservoir level data s

  17. Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 89

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    Summaries are presented for the DOE contracts related to supported research for thermal recovery of petroleum, geoscience technology, and field demonstrations in high-priority reservoir classes. Data included for each project are: title, contract number, principal investigator, research organization, beginning date, expected completion date, amount of award, objectives of the research, and summary of technical progress.

  18. Constitutive models for the Etchegoin Sands, Belridge Diatomite, and overburden formations at the Lost Hills oil field, California

    Energy Technology Data Exchange (ETDEWEB)

    FOSSUM,ARLO F.; FREDRICH,JOANNE T.

    2000-04-01

    This report documents the development of constitutive material models for the overburden formations, reservoir formations, and underlying strata at the Lost Hills oil field located about 45 miles northwest of Bakersfield in Kern County, California. Triaxial rock mechanics tests were performed on specimens prepared from cores recovered from the Lost Hills field, and included measurements of axial and radial stresses and strains under different load paths. The tested intervals comprise diatomaceous sands of the Etchegoin Formation and several diatomite types of the Belridge Diatomite Member of the Monterey Formation, including cycles both above and below the diagenetic phase boundary between opal-A and opal-CT. The laboratory data are used to drive constitutive parameters for the Extended Sandler-Rubin (ESR) cap model that is implemented in Sandia's structural mechanics finite element code JAS3D. Available data in the literature are also used to derive ESR shear failure parameters for overburden formations. The material models are being used in large-scale three-dimensional geomechanical simulations of the reservoir behavior during primary and secondary recovery.

  19. Tectonic Framework and Deep Structure of South China and Their Constraint to Oil-Gas Field Distribution

    Institute of Scientific and Technical Information of China (English)

    WANG Qingchen; LIU Jinsong; DU Zhili; CAI Liguo

    2009-01-01

    South China could be divided into one stable craton,the Yangtze Craton(YzC),and several orogenic belts in the surrounding region,that is the Triassic Qinling-Dabie Orogenic Belt(QDOB)in river Orogenic Belt(TOB)in the west,the Youjiang Orogenic Belt(YOB)in the southwest,the Middle Paleozoic Huanan Orogenic Belt (HOB) in the southeast, and the Mesozoic-Cenozoic Maritime Orogenic Belt(MOB)along the coast.Seismic tomographic images reveal that the Moho depth is deeper than 40 km and the lithosphere iS about 210 km thick beneath the YzC.The SGOB is characterized by thick crust (>40 km)and thin lithosphere(<150 km).The Hob.Yob and Mob have a thin crnst (<40 km)and thin lithosphere(<150 km).Terrestrial heat flow survey revealed a distribution pattern with a low heat flow region in the eastern YzC and western HOB and two high heat flow regions in the TOB and MOB respectively.Such a"high-low-high"heat flow distribution pattern could have resulted from Cenozoic asthenosphere upwelling.All oil-gas fields are concentrated in the central part of the YzC.Remnant oil pools have been discovered along the southern margin of the YzC and its adjacent orogenic belts.From a viewpoint of geological and geophysical structure, regions in South China with thick lithosphere and low heat flOW value.as well as weak deformation.might be the ideal region for further petroleum exploration.

  20. Analysis of Wax Cleaning and Prevention Technology for Ningdong Oil Field%宁东油田清蜡、防蜡技术分析

    Institute of Scientific and Technical Information of China (English)

    闫金鹏; 吕玉杰; 朱江勇

    2012-01-01

    在原油开采过程中,随着温度、压力的降低和气体的析出,溶解的石蜡便以结晶体析出、逐渐长大聚集最终沉积在管壁等固相表面上,即出现所谓的结蜡现象。结蜡会堵塞产油层,降低油井产量,同时也会增大油井负荷,造成生产事故。油井结蜡是影响油井高产、稳产的主要因素之一,清蜡和防蜡是高含蜡油井常规管理的重要内容。通过收集整理现场资料、分析原油性质和综合评价不同清防蜡技术的经济效果,确定宁东油田采用热力清蜡和化学防蜡技术较为合适。%With reduction of temperature and pressure and release of gas in the production of crude oil, the dissolved paraffin will separate out in crystal form, grows up gradually and finally deposit on the surface of tube shell, which is called deposition. The wax deposition will block the oil layer, reduce the crude oil production, increase the oil well's operating load and lead to operation accident. The wax deposition in oil well is also one of main factors affecting the high and stable oil production. Therefore, wax cleaning and waxing prevention are an important items in the management of oil well with waxy crude oil. The collection of field information, analysis of crude oil properties and comprehensive evaluation of different wax cleaning and waxing prevention technologies and associated economics have concluded that the application of combination process of thermal wax cleaning and chemical waxing prevention is an effective way to control wax deposition in Ningdong Oil Field.

  1. A SIMPLE ANALYTICAL MODEL FOR PREDICTING SAND PRODUCTION IN A NIGER DELTA OIL FIELD

    Directory of Open Access Journals (Sweden)

    Isehunwa S.O

    2010-09-01

    Full Text Available Sand production, which is predominant in the Niger Delta, is a growing concern in the petroleum industry because of the associated technical, operational and economic challenges. The development of sanding predictive tools and effective management strategies has received much attention in literature. However, most of the publishedtheoretical models have been validated with laboratory or data obtained from petroleum provinces other than the Niger Delta. This work developed a simple analytical model for predicting sand production and validated it using 16 wells in a Niger Delta Field. The results confirmed the well-known impact of flow rate, fluid viscosity and grain size and density on sanding rates. It was also observed that at moderate production rates, sanding in the Niger Delta Field has relatively small arch lengths of below 30 feet.

  2. 中原油田采油一厂腐蚀严重井的治理%Corrosion Control of Oil Well in 1 st Oil Production Plant of Zhongyuan Oil Field

    Institute of Scientific and Technical Information of China (English)

    丁其杰; 韩长喜; 刘生福; 王红; 陈慧丽

    2012-01-01

    中原油田分公司采油一厂地质状况复杂,产出液具有“四高一低”的特点,产出液Cl-含量为3~11×10^4mg/L、矿化度为(7~22)×10^4mg/L、HCO3-为50~400mg/L、井底温度高达130—150℃、pH值低(5.5左右)的特点,腐蚀性较强。通过对采油一厂10口油井腐蚀因素调查,摸清了腐蚀原因是产出液中Cl-,HCO3-等强腐蚀性离子含量高,同时含有一定量的CO2,并含SRB,从而形成弱酸性腐蚀水体。经向套管中注入KY-2高效缓性剂(加药浓度100μg/g)后,腐蚀速率由0.0913mm/a降为0.0223mm/a,总铁值由36.1mg/L降为26.6mg/L;治理后减少腐蚀作业14井次,防腐效果明显。%The geological conditions in 1 st Oil Production Plant of Zhongyuan Oil Field are very complex. The production liquid is characterized by higher C1 (3 - 11 ) × 104mg/L, higher minerality (7 -22)×104mg/L, higher temperature (well bottom temperature 130 - 150℃ ) and lower pH value (about 5.5 ). The liquid is very corrosive. The investigation of the corrosion in the 10 oil wells in 1 st Oil Production Plant revealed that the corrosion culprit was the weak acid body resulted from higher C1- , HCO3 , CO2 and sulfate reducing bacteria(SRB) in the production liquid. After injection of high - efficiency corrosion inhibitor KY -2 in the conduit at a dosage of 100 ppm, the corrosion rate was reduced from 0. 0913mm/a to 0. 0223mm/a. The iron ion in the production water was lowered from 36.1 mg,/L to 26.6 mg/L. The underground work for corrosion control has been reduced by 14 well times as compared with that before the injection. The corrosion prevention effect is obvious.

  3. LABORATORY AND FIELD EVALUATION OF ESSENTIAL OILS FROM Cymbopogon nardus AS OVIPOSITION DETERRENT AND OVICIDAL ACTIVITIES AGAINST Helicoverpa armigera Hubner ON CHILI PEPPER

    Directory of Open Access Journals (Sweden)

    Wiwin Setiawati

    2011-04-01

    Full Text Available The fruit borer (Helicoverpa armigera Hubner is one of the key pests of chili pepper in Indonesia. Yield loss due to this insect pest may reach up to 60%. Chemical treatment for con-trolling this insect pest is ineffective and eventually leads to environmental pollution. More environmentally safe insecticides are developed based on natural plant ingredients as their active compound such as essential oils. This study aimed to assess the potential of citronella oil for managing H. armigera on chili pepper. The experiments were conducted at the Indonesian Vegetables Research Institute from April 2009 to March 2010 and in Cirebon, West Java from November 2009 to March 2010. A field experiment was designed in a randomized complete block design with five treatments and replicated five times. Citronella oil was extracted by steam distillation from Cymbo-pogon  nardus. The oil was then chemically characterized by using GC-MS and its efficacy (ovicidal and feeding deterrent against H. armigera was tested both in laboratory and field conditions. The GC-MS result showed that major chemical compounds of the citronella oil used were citronella (35.97%, nerol (17.28%, citronellol (10.03%, geranyle acetate (4.44%, elemol (4.38%, limonene (3.98%, and citronnellyle acetate (3.51%. The laboratory experiment revealed that the highest concentration (4,000 ppm of citronella oil reduced egg laying by 53-66%. Ovicidal activity was concentration dependent, and egg hatchability decreased by 15-95% compared to control. The field experiment showed that treatment of citronella oil at 2.0 mL L-1 significantly reduced fruit damage by H. armigera similar to the plots treated with spinosad at the recommended dose (60 g ai ha-1. Application of citronella oil significantly reduced fruit damage by 72% and increased quality of the chili pepper. Because oviposition and feeding deterrent properties are key factors in controlling the pest, therefore this study revealed that

  4. Microbial degradation of total petroleum hydrocarbons in crude oil: a field-scale study at the low-land rainforest of Ecuador.

    Science.gov (United States)

    Maddela, Naga Raju; Scalvenzi, Laura; Venkateswarlu, Kadiyala

    2016-12-26

    A field-level feasibility study was conducted to determine total petroleum hydrocarbon (TPH)-degrading potential of two bacterial strains, Bacillus thuringiensis B3 and B. cereus B6, and two fungi, Geomyces pannorum HR and Geomyces sp. strain HV, all soil isolates obtained from an oil field located in north-east region of Ecuador. Crude oil-treated soil samples contained in wooden boxes received a mixture of all the four microorganisms and were incubated for 90 days in an open low-land area of Amazon rainforest. The percent removal of TPHs in soil samples that received the mixed microbial inoculum was 87.45, indicating the great potential of the soil isolates in field-scale removal of crude oil. The TPHs-degrading efficiency was verified by determining the toxicity of residues, remained in soil after biodegradation, toward viability of Artemia salina or seed germination and plant growth of cowpea. Our results clearly suggest that the selected soil isolates of bacteria and fungi could be effectively used for large-scale bioremediation of sites contaminated with crude oil.

  5. Area balance and strain in an extensional fault system: Strategies for improved oil recovery in fractured chalk, Gilbertown Field, southwestern Alabama. Final report, March 1996--September 1998

    Energy Technology Data Exchange (ETDEWEB)

    Pashin, J.C.; Raymond, D.E.; Rindsberg, A.K.; Alabi, G.G.; Carroll, R.E.; Groshong, R.H.; Jin, G.

    1998-12-01

    This project was designed to analyze the structure of Mesozoic and Tertiary strata in Gilbertown Field and adjacent areas to suggest ways in which oil recovery can be improved. The Eutaw Formation comprises 7 major flow units and is dominated by low-resistivity, low-contrast play that is difficult to characterize quantitatively. Selma chalk produces strictly from fault-related fractures that were mineralized as warm fluid migrated from deep sources. Resistivity, dipmeter, and fracture identification logs corroborate that deformation is concentrated in the hanging-wall drag zones. New area balancing techniques were developed to characterize growth strata and confirm that strain is concentrated in hanging-wall drag zones. Curvature analysis indicates that the faults contain numerous fault bends that influence fracture distribution. Eutaw oil is produced strictly from footwall uplifts, whereas Selma oil is produced from fault-related fractures. Clay smear and mineralization may be significant trapping mechanisms in the Eutaw Formation. The critical seal for Selma reservoirs, by contrast, is where Tertiary clay in the hanging wall is juxtaposed with poorly fractured Selma chalk in the footwall. Gilbertown Field can be revitalized by infill drilling and recompletion of existing wells. Directional drilling may be a viable technique for recovering untapped oil from Selma chalk. Revitalization is now underway, and the first new production wells since 1985 are being drilled in the western part of the field.

  6. Marine transportation of oil from Timan Pechora and from inland Russian fields

    Energy Technology Data Exchange (ETDEWEB)

    Andresen, Dag; Backlund, Anders

    1996-05-01

    As part of The International Northern Sea Route Programme (INSROP), Subprogram III, Trade and Commercial Shipping, a study has been made concerning seaborne export of liquefied petroleum gas (LPG) from the Northern Russia, especially the West Siberian fields in Tyumen. The main purpose of the total project III.0703, part 2 and this study is to evaluate the economic viability of seaborne export from this area to the European region, mainly with the use of a special ice-strengthened LPG vessel, constructed and designed for such seaborne operations. This study concentrates on both seaborne LPG transportation, the demand and supply for seaborne LPG in the world and marine transportation of LPG from the West Siberian fields. Another purpose is to see which regions are potential exporters, importers and buyers of seaborne export of LPG from Tyumen. Currently large quantities of liquefied gas are flared off at the West Siberian fields due to insufficient infrastructure, lack of modern processing capacity and capital. A number of gas processing plants, nine in total, are in operation by the Sibneftegaspererabotka Corporation (SNGP), the main products being polyethylene variants. The regional surplus of LPG is estimated to increase to 700.000 metric tonnes by 1995 for which limited transportation capacity exists. As the development in Russia evolves to the East in the Timan-Pechora and Yamal areas, a part of the Northern Sea Route will be affected. The analysis will give a starting point for more detailed comparisons of the potential for seaborne LPG export to the world market. The project is split into several parts and deals with LPG markets and consumers, analyses different issues related to the political and economic environment in the LPG and gas industry, evaluates the world-wide seaborne demand for LPG and focuses on the estimated traded LPG until the turn of the century, analyses the supply side of the LPG market emphasising on the seaborne export of LPG, carries

  7. Activities of the Oil Implementation Task Force; Contracts for field projects and supporting research on enhanced oil recovery, July--September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Tiedemann, H.A. (ed.) (USDOE Bartlesville Project Office, OK (USA))

    1991-05-01

    The report contains a general introduction and background to DOE's revised National Energy Strategy Advanced Oil Recovery Program and activities of the Oil Implementation Task Force; a detailed synopsis of the symposium, including technical presentations, comments and suggestions; a section of technical information on deltaic reservoirs; and appendices containing a comprehensive listing of references keyed to general deltaic and geological aspects of reservoirs and those relevant to six selected deltaic plays. Enhanced recovery processes include chemical floodings, gas displacement, thermal recovery, geoscience, and microbial recovery.

  8. Novel Cleanup Agents Designed Exclusively for Oil Field Membrane Filtration Systems Low Cost Field Demonstrations of Cleanup Agents in Controlled Experimental Environments

    Energy Technology Data Exchange (ETDEWEB)

    David Burnett; Harold Vance

    2007-08-31

    The goal of our project is to develop innovative processes and novel cleaning agents for water treatment facilities designed to remove fouling materials and restore micro-filter and reverse osmosis (RO) membrane performance. This project is part of Texas A&M University's comprehensive study of the treatment and reuse of oilfield brine for beneficial purposes. Before waste water can be used for any beneficial purpose, it must be processed to remove contaminants, including oily wastes such as residual petroleum hydrocarbons. An effective way of removing petroleum from brines is the use of membrane filters to separate oily waste from the brine. Texas A&M and its partners have developed highly efficient membrane treatment and RO desalination for waste water including oil field produced water. We have also developed novel and new cleaning agents for membrane filters utilizing environmentally friendly materials so that the water from the treatment process will meet U.S. EPA drinking water standards. Prototype micellar cleaning agents perform better and use less clean water than alternate systems. While not yet optimized, the new system restores essentially complete membrane flux and separation efficiency after cleaning. Significantly the amount of desalinated water that is required to clean the membranes is reduced by more than 75%.

  9. Oil industry first field trial of inter-well reservoir nanoagent tracers

    Science.gov (United States)

    Kanj, Mazen Y.; Kosynkin, Dmitry V.

    2015-05-01

    This short manuscript highlights the industry's first proven reservoir nanoagents' design and demonstrates a successful multi-well field trial using these agents. Our fundamental nanoparticles tracer template, A-Dots or Arab-D Dots, is intentionally geared towards the harsh but prolific Arab-D carbonate reservoir environment of 100+°C temperature, 150,000+ppm salinity, and an abundant presence of divalent ions in the connate water. Preliminary analyses confirmed nanoparticles' breakthrough at a producer nearly 500m from the injector at the reservoir level; thus, proving the tracer nanoparticles' mobility and transport capability. This is considered industry-first and a breakthrough achievement complementing earlier accomplishments in regard to the nanoagents' reservoir stability with the first successful single well test and ease of scale up with the synthesis of one metric ton of this material. The importance of this accomplishment is not in how sophisticated is the sensing functionalities of this design but rather in its stability, mobility, scalability, and field application potentials. This renders the concept of having active, reactive, and even communicative, in-situ reservoir nanoagents for underground sensing and intervention a well anticipated near-future reality.

  10. The numerical simulation and forecast of spilled oil trajectory in Yacheng oil and gas field sea area%崖城油气田附近海域溢油漂移轨迹数值模拟预测

    Institute of Scientific and Technical Information of China (English)

    王璟; 娄安刚; 曹振东

    2012-01-01

    通过采用不规则的三角网格和有限体积法的FVCOM模式,建立三维潮流数值模型.利用大海域计算得到的调和常数值作为开边界的输入值,模拟出崖城附近海域的潮流和潮位变化情况.在潮流、潮位验证正确的前提下,利用欧拉—拉格朗日追踪方法,建立了溢油轨迹预测模型,进行崖城油气田附近海域溢油中心轨迹的预测,同时预测了溢油漂移的平均速率和油膜抵达敏感区的时间,为油气田实施应急措施提供技术支持.%Based on the unstructured grid finite-volume coastal ocean model (FVCOM), the complete three-dimensional fine-solution equation group of shallow-sea tide is used to compute the tidal current and sea-level variations in Yacheng sea area. The open boundary conditions are provided by the open oceanic model. The simulation of the tidal current and sea-level are verified with the observation data. By Euler-Lagarangian tracing method, a trajectory forecasting model for spilled oil is established to predict the trajectory of the oil-film centre, the averaging moving rate and the reaching time of the oil to the sensitive area in Yacheng oil and gas field sea area. It offers some effective technologies for the emergency response to the oil and gas field.

  11. Comprehensive Information Interpretation in Oil and Gas Exploration—An Example of Buried-Hill Oil and Gas Field in the Jizhong area

    Institute of Scientific and Technical Information of China (English)

    LiangShengzheng

    2003-01-01

    The petroleum geophysical and geological comprehensive interpretation with whole-information of gravitational, magnetic, electrical and seismic methods has played an important role in the exploration and development of the buried-hill oil