Planner and nuclear crisis relocation

International Nuclear Information System (INIS)

Platt, R.H.

1984-01-01

Criticism of the Federal Emergency Management Agency (FEMA) plans to relocate two-thirds of the American people one week before a nuclear attack has been so intense that planners have renamed the crisis relocation plan to Integrated Emergency Management. A careful study of plans for the town of Greenfield, Massachusetts show that they are not only unworkable, but would seriously weaken the country even if no attack occurred. Recent warnings of a global climatic catastrophe and nuclear winter in the wake of a nuclear exchange underscore the need to denounce relocation policies as dangerous. Planners should take the lead in emphasizing the long-term consequences and informing the public that there is no civil defense against nuclear war. 7 references

75 FR 22404 - Clofencet; Notice of Receipt of Request to Voluntarily Cancel Certain Pesticide Registrations

Science.gov (United States)

2010-04-28

... Request to Voluntarily Cancel Certain Pesticide Registrations AGENCY: Environmental Protection Agency (EPA... voluntarily cancel their registrations of certain products containing the pesticide clofencet. The request... cancelled only if such sale, distribution, or use is consistent with the terms as described in the final...

76 FR 36535 - Dicofol; Notice of Receipt of Request To Voluntarily Cancel Certain Pesticide Registrations

Science.gov (United States)

2011-06-22

... Request To Voluntarily Cancel Certain Pesticide Registrations AGENCY: Environmental Protection Agency (EPA... registrants to voluntarily cancel their registrations of all products containing the pesticide dicofol. The... the registrations have been cancelled only if such sale, distribution, or use is consistent with the...

75 FR 24697 - Carbaryl; Notice of Receipt of Requests To Voluntarily Cancel Certain Pesticide Registrations

Science.gov (United States)

2010-05-05

... Requests To Voluntarily Cancel Certain Pesticide Registrations AGENCY: Environmental Protection Agency (EPA... voluntarily cancel their registrations of certain products containing the pesticide carbaryl. The requests... of products listed in this notice will be permitted after the registration has been canceled only if...

75 FR 22402 - Methyl Parathion; Notice of Receipt of Request to Voluntarily Cancel Pesticide Registrations

Science.gov (United States)

2010-04-28

... Receipt of Request to Voluntarily Cancel Pesticide Registrations AGENCY: Environmental Protection Agency... registrants to voluntarily cancel their registrations of products containing the pesticide methyl parathion... will be permitted after the registration has been cancelled only if such sale, distribution, or use is...

Voluntarily controlled but not merely observed visual feedback affects postural sway

Science.gov (United States)

Asai, Tomohisa; Hiromitsu, Kentaro; Imamizu, Hiroshi

2018-01-01

Online stabilization of human standing posture utilizes multisensory afferences (e.g., vision). Whereas visual feedback of spontaneous postural sway can stabilize postural control especially when observers concentrate on their body and intend to minimize postural sway, the effect of intentional control of visual feedback on postural sway itself remains unclear. This study assessed quiet standing posture in healthy adults voluntarily controlling or merely observing visual feedback. The visual feedback (moving square) had either low or high gain and was either horizontally flipped or not. Participants in the voluntary-control group were instructed to minimize their postural sway while voluntarily controlling visual feedback, whereas those in the observation group were instructed to minimize their postural sway while merely observing visual feedback. As a result, magnified and flipped visual feedback increased postural sway only in the voluntary-control group. Furthermore, regardless of the instructions and feedback manipulations, the experienced sense of control over visual feedback positively correlated with the magnitude of postural sway. We suggest that voluntarily controlled, but not merely observed, visual feedback is incorporated into the feedback control system for posture and begins to affect postural sway. PMID:29682421

Industrial relocation and energy consumption: Evidence from China

International Nuclear Information System (INIS)

Zhao Xiaoli; Yin Haitao

2011-01-01

With economic development and the change of industrial structure, industrial relocation is an inevitable trend. In the process of industrial relocation, environmental externality and social cost could occur due to market failure and government failure. Little attention has been paid to this issue. In this paper, we address it with a theoretical analysis and an empirical investigation on the relationship between China's industrial relocation in the early 1990s and energy consumption which is the primary source of CO 2 emission, an environmental externality that causes increasing concerns. The macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). Using fixed-effect regression model and simulation method, we provide an empirical support to this argument. In order to further reduce environmental externalities and social cost in the process of industrial relocation, we provide policy suggestions as follows: First, strengthen the evaluation of environmental benefits/costs; Second, pay more attention to the coordinated social-economic development; Third, avoid long-lived investment in high-carbon infrastructure in areas with industries moved in; Fourth, address employment issue in the areas with industries moved out. - Research highlights: → Little attention has been paid to the linkage between industrial relocation and environmental externality. → Our macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). → Using fixed-effect regression model and simulation method, we find a positive link between China's industrial relocation in the early 1990s and energy saving. → Policy suggestions to further reduce environmental externalities and social cost in the process of industrial relocation are discussed.

75 FR 57787 - Methyl Parathion; Notice of Receipt of Request to Voluntarily Cancel Certain Pesticide Registrations

Science.gov (United States)

2010-09-22

... Receipt of Request to Voluntarily Cancel Certain Pesticide Registrations AGENCY: Environmental Protection... registrant to voluntarily cancel their section 24(c) Special Local Needs (SLN) registrations of certain... after the registration has been canceled only if the sale, distribution, or use is consistent with the...

Evaluation of freshwater mussel relocation as a conservation and management strategy

Science.gov (United States)

Cope, W. Gregory; Waller, Diane L.

1995-01-01

The relocation of unionacean mussels is commonly used as a conservation and management tool in large rivers and streams. Relocation has been used to recolonize areas where mussel populations have been eliminated by prior pollution events, to remove mussels from construction zones and to re-establish populations of endangered species. More recently, relocation has been used to protect native freshwater mussels from colonization by the exotic zebra mussel Dreissena polymorpha. We conducted a literature review of mussel relocations and evaluated their relative success as a conservation and management strategy. We found that 43% of all relocations were conducted because of construction projects that were forced to comply with the Endangered Species Act 1973 and that only 16% were monitored for five or more consecutive years. Most (43%) relocation projects were conducted from July to September, presumably a period when reproductive stress is relatively low for most species and the metabolic rate is sufficient for reburrowing in the substrate. The mortality of relocated mussels was unreported in 27% of projects; reported mortality varied widely among projects and species and was difficult to assess. The mean mortality of relocated mussels was 49% based on an average recovery rate of 43%. There is little guidance on the methods for relocation or for monitoring the subsequent long-term status of relocated mussels. Based on this evaluation, research is needed to develop criteria for selecting a suitable relocation site and to establish appropriate methods and guidelines for conducting relocation projects.

75 FR 869 - Maneb; Notice of Receipt of a Request to Voluntarily Cancel Pesticide Registrations of Certain...

Science.gov (United States)

2010-01-06

... Request to Voluntarily Cancel Pesticide Registrations of Certain Products AGENCY: Environmental Protection... registrant to voluntarily cancel their registrations of certain products containing the pesticide maneb. EPA... period deadline identified. II. Background on the Receipt of Requests to Cancel Registrations This notice...

75 FR 9896 - Maneb; Notice of Receipt of a Request to Voluntarily Cancel a Certain Pesticide Registration

Science.gov (United States)

2010-03-04

... Request to Voluntarily Cancel a Certain Pesticide Registration AGENCY: Environmental Protection Agency... registrant to voluntarily cancel their pesticide registration. DATES: Unless a request is withdrawn by April... period, orders will be issued canceling this registration. The Agency will consider withdrawal requests...

47 CFR 0.186 - Emergency Relocation Board.

Science.gov (United States)

2010-10-01

..., Defense and Emergency Preparedness Functions § 0.186 Emergency Relocation Board. (a) As specified in the... functions of the Commission. Relocation may be required to accommodate a variety of emergency scenarios... require the evacuation of FCC headquarters with little or no advance notice, but for only a short duration...

44 CFR 63.6 - Reimbursable relocation costs.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Reimbursable relocation costs. 63.6 Section 63.6 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT... OF SECTION 1306(c) OF THE NATIONAL FLOOD INSURANCE ACT OF 1968 General § 63.6 Reimbursable relocation...

The Four-Factor Taxonomy of Relocation Outcomes

Science.gov (United States)

Matthiesen, Jane Kirsten; Tissington, Patrick

2008-01-01

Relocation, an intraorganizational geographical transfer, can be used for human resource development (HRD) because of the positive developmental effects it can induce. It is, thus, important for HRD professionals to understand the implications of relocation to ensure it is used appropriately and effectively as an HRD technique. Research on…

Development of Relocation Strategies Regarding Eruption Hazard in Mount Merapi

Directory of Open Access Journals (Sweden)

Rosdiana Puji Lestari

2015-09-01

Full Text Available The research was conducted to answer a questions: 1 how the relocation of the current strategy was carried out by the government 2 the problems that arise in the relocation which has yet to be resolved, 3 how the good concept of relocation so that these problems can be minimized. The research methodology used in this study combined quantitative and qualitative methods. Qualitative methods are used to explain the empirical facts that exist in each of these conditions in the relocation settlements. SWOT analysis is used to provide an overview of the strengths, weaknesses, opportunities and threats in the relocation of victims of Merapi. Information, facts and issues that arise in the study will be described, explained and analyzed primarily for the impact of residential relocation on social and economic life of the community. Relocation concept of the economic aspects of community empowerment efforts should be made related to community economic recovery after a change in livelihood. In addition, the potential of community mapping needs to be done by the government to be optimized and developed. From the aspect of government settlements seek to transfer ownership of land in the new settlement which may be the property of the citizens so that citizens obtain legal certainty while occupying the new settlement. The social aspects of the development potential of relocating residents and making it as a tourist village, residents need to support that relocation is no longer a newcomer, they have the same rights and obligations with citizens of another.

Relocation impacts of a major release from SRTC

International Nuclear Information System (INIS)

Blanchard, A.; Thompson, E.A.; Thompson, J.M.

1999-01-01

The relocation impacts of an accidental release, scenario 1-RD-3 , are evaluated for the Savannah River Technology Center. The extent of the area potentially contaminated to a level that would result in doses exceeding the relocation protective action guide(PAG)is calculated. The maximum calculated distance downwind from the accident at which the relocation PAG is exceeded is also determined. The consequences of the particulate portion of the release are evaluated using the HOTSPOT model and an EXCEL spreadsheet. The consequences of the tritium release are evaluated using UFOTRI

Strategic environmental policy when the governments are threatened by relocation

International Nuclear Information System (INIS)

Greaker, Mads

2003-01-01

This paper analyzes how the threat of relocation influences environmental policy. The stringency of environmental policy is determined in a game between two governments. There is one firm in each jurisdiction, and both firms threaten to relocate their production to the other jurisdiction. Because there is asymmetric information about the cost of relocation, the governments do not know the credibility of the threat. We compare the outcome of this game with the outcome of a game in which relocation is not possible. We find that the threat of relocation can increase both the level of environmental regulation and welfare. The profit tax level proves to be the most decisive for the result; that is, the higher the profit tax level, the lower the level of environmental regulation

Social Relationships, Psychosocial Adaptation, and Intrainstitutional Relocation of Elderly Men.

Science.gov (United States)

Tesch, Stephanie A.; And Others

1989-01-01

Studied intrainstitutional relocation of 40 men aged 53 to 91 and its effects on social integration, and behavioral and self-reported measures of psychosocial adaptation. Found in both longitudinal and time-lag analyses of pre- and post-relocation data, relocated men had lower scores on attitude toward aging dimension, fewer friends, and evidenced…

Franchise Relocations, Expansions, and Mergers in Professional Sports Leagues

OpenAIRE

Daniel, Rascher

2008-01-01

All three sections in this chapter are interrelated. Expansions and relocations, especially in the early years of a league, are often the response to upstart rival leagues. More recently, relocations have occurred because another city offers a better facility lease regardless of whether the league as a whole is better off or not. Relocations, more so than expansions, often end up in court whether as an antitrust case accusing the league of monopolistically restricting business or as an emi...

Relocation: Its Effect on Health, Functioning and Mortality.

Science.gov (United States)

Borup, Jerry H.; And Others

1980-01-01

Relocation of older patients had a positive effect on hypochondria, stamina, hygiene, and daily functioning but no effect on health status. Self-health assessments, stamina, hypochondria, and hygiene had no effect on the mortality rate of relocated patients, but daily functioning did effect the mortality rate. (Author)

Individual relocation decisions after tornadoes: a multi-level analysis.

Science.gov (United States)

Cong, Zhen; Nejat, Ali; Liang, Daan; Pei, Yaolin; Javid, Roxana J

2018-04-01

This study examines how multi-level factors affected individuals' relocation decisions after EF4 and EF5 (Enhanced Fujita Tornado Intensity Scale) tornadoes struck the United States in 2013. A telephone survey was conducted with 536 respondents, including oversampled older adults, one year after these two disaster events. Respondents' addresses were used to associate individual information with block group-level variables recorded by the American Community Survey. Logistic regression revealed that residential damage and homeownership are important predictors of relocation. There was also significant interaction between these two variables, indicating less difference between homeowners and renters at higher damage levels. Homeownership diminished the likelihood of relocation among younger respondents. Random effects logistic regression found that the percentage of homeownership and of higher income households in the community buffered the effect of damage on relocation; the percentage of older adults reduced the likelihood of this group relocating. The findings are assessed from the standpoint of age difference, policy implications, and social capital and vulnerability. © 2018 The Author(s). Disasters © Overseas Development Institute, 2018.

Fuel pellet fracture and relocation

International Nuclear Information System (INIS)

Walton, L.A.; Husser, D.L.

1983-01-01

The model used to describe fuel pellet fracture and relocation is an important feature of a fuel performance computer code. This model becomes especially important if the computer code is principally to be used for the evaluation of pellet clad interaction. The fracture and relocation model being developed for the B and W fuel performance code FUMAC was derived from an extensive data base. Cross sections of irradiated fuel rods were photographically magnified and measured to determine the configuration of the fragments of the fractured fuel pellets. Data, representing a wide range of LWR fuel designs and as-manufactured mechanical configurations, were catalogued and systematically reduced and then correlated as a function of the likely independent variables. These correlations define the key phenomenological behavior patterns which the relocation model must duplicate and indicate which mechanistic approaches are viable explanations of this behavior. The data base covers the burnup range from approximately one to 35 GWd/mtU and linear heat rates from less than 100 to nearly 700 W/Cm. This paper presents the correlated data base and the methods used to derive and interpret it. It was determined from this data base that pellet cracking is initially both power level and burnup dependent but tends to saturate eventually with continued steady irradiation. Fuel pellet relocation was found to be much more extensive than would be deduced from thermal considerations alone. Even at very low burnups fuel fragments were found to move outward until restrained by the cladding. The results also suggest that changes in internal resistance to heat flow within the pellets due to the opening of cracks may be as important as peripheral gap changes to the thermal modeler. The transient response and thermal implications of this model are recommended as primary areas for future investigation

The TMI-2 core relocation: Heat transfer and mechanism

International Nuclear Information System (INIS)

Epstein, M.; Fauske, H.K.

1987-07-01

It is postulated that the collapse of the upper debris bed was the main cause of core failure and core material relocation during the TMI-2 accident. It is shown that this mechanism of core relocation can account for the timescale(s) and energy transfer rate inferred from plant instrumentation. Additional analysis suggests that the water in the lower half of the reactor vessel was subcooled at the onset of relocation, as subcooling serves to explain the final coolable configuration at the bottom of the TMI vessel

13 CFR 142.38 - Can the administrative complaint be settled voluntarily?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can the administrative complaint be settled voluntarily? 142.38 Section 142.38 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 142.38 Can the administrative...

Mississippi Labor Mobility Demonstration Project--Relocating the Unemployed: Dimensions of Success.

Science.gov (United States)

Speight, John F.; And Others

The document provides an analysis of relocation stability of individuals relocated during the March, 1970-November, 1971 contract period. Data bases were 1,244 applicants with screening information and 401 individuals with follow-up interview information. Approximately one half were in new areas six months after being relocated. Reasons for…

75 FR 860 - Maneb; Notice of Receipt of a Request to Voluntarily Cancel a Pesticide Registration of a Certain...

Science.gov (United States)

2010-01-06

... Request to Voluntarily Cancel a Pesticide Registration of a Certain Product AGENCY: Environmental... request by the registrant to voluntarily cancel their registration of a product containing the pesticide... deadline identified. II. Background on the Receipt of Requests to Cancel and/or Amend Registrations to...

45 CFR 681.42 - Can the administrative complaint be settled voluntarily?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Can the administrative complaint be settled voluntarily? 681.42 Section 681.42 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 681.42 Can the...

Relocation Impacts of an H-Separations Coil and Tube Failure

International Nuclear Information System (INIS)

Blanchard, A.

1999-01-01

The relocation impacts of an accidental release, scenario 1-RD-2.35, are evaluated for H-Separations. The extent of the area potentially contaminated to a level that would result in doses exceeding the relocation protective action guide (PAG) is calculated. The maximum calculated distance downwind from the accident at which the relocation PAG is exceeded is also determined. The consequences of the release are evaluated using the HOTSPOT model and an EXCEL spreadsheet

Relocation impacts of an H-Separations coil and tube failure

International Nuclear Information System (INIS)

Blanchard, A.

2000-01-01

The relocation impacts of an accidental release, scenario 1-RD-2.35, are evaluated for H-Separations. The extent of the area potentially contaminated to a level that would result in doses exceeding the relocation protective action guide (PAG) is calculated. The maximum calculated distance downwind from the accident at which the relocation PAG is exceeded is also determined. The consequences of the release are evaluated using the HOTSPOT model and an EXCEL spreadsheet

A Heuristic Procedure for the Outbound Container Relocation Problem during Export Loading Operations

Directory of Open Access Journals (Sweden)

Roberto Guerra-Olivares

2015-01-01

Full Text Available During export ship loading operations, it is often necessary to perform relocation movements with containers that interfere with access to the desired container in the ship loading sequence. This paper presents a real-time heuristic procedure for the container relocation problem employing reachstacker vehicles as container handling equipment. The proposed heuristic searches for good relocation coordinates within a set of nearby bays. The heuristic has a parameter that determines how far from the original bay a container may be relocated. The tradeoff between reducing relocation movements and limiting vehicle travel distances is examined and the performance of the heuristic is compared with a common practice in the smaller container terminals in Chile and Mexico. Finally, a mathematical model for the container relocation problem is presented.

Means for Transferring Knowledge in the Relocation of Manufacturing Units

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik Skov; Liangsiri, Jirapha

2009-01-01

The global spread of production makes companies relocating their manufacturing units to achieve economies of scale, enjoy low-cost labor, or access to new markets. For the relocation, not only equipments, systems and facilities, need to be moved, but also operational knowledge and experience. Based...

Quotas, Relocation and Jobs

Science.gov (United States)

Blumrosen, Alfred

1975-01-01

This testimony, before a public hearing of the New York City Commission on Human Rights in May 1974, has two express focuses: one is the question of quotas, and the other is the problem of relocation of plants and facilities in the suburban areas and the consequent difficulties minorities face in retaining equal employment opportunities.…

Infectious Disease Prevalence and Factors Associated with Upper Respiratory Infection in Cats Following Relocation

Directory of Open Access Journals (Sweden)

Mehnaz Aziz

2018-06-01

Full Text Available Feline relocation is used increasingly in animal welfare to decrease shelter euthanasia rates and increase positive outcomes. Concerns about infectious disease introduction and transmission are often expressed; however, little research has been conducted on even the baseline prevalence of infectious disease following relocation. This study, which collected data on 430 cats relocated through an established program over 7 months, evaluated the prevalence of upper respiratory infection (URI, feline panleukopenia virus (FPV and dermatophytosis at one destination agency. The period prevalence was 25.8% for URI, 1.6% for FPV and 0.9% for dermatophytosis. Mixed-effects logistic regression was performed to investigate factors associated with URI. Younger age, increased time in transport, and increased length of stay at the destination agency were associated with increased URI prevalence following relocation. The findings of this study reveal that certain highly contagious and environmentally persistent infectious diseases, such as FPV and dermatophytosis, are uncommon following relocation in an established program; however, URI in relocated cats should be proactively managed. Animal welfare agencies can use this information to guide shelter and relocation operations and mitigate the impact of URI in relocated cats.

Environmental assessment for relocation of NREL research experiments

International Nuclear Information System (INIS)

1992-06-01

In compliance with the National Environmental Policy Act (NEPA), the Department of Energy (DOE) has prepared this environmental assessment (DOE/EA-0619) to evaluate the environmental consequences associated with the conduct of ongoing research activities of its National Renewable Energy Laboratory proposed to be relocated to leased commercial laboratory and warehouse space at 6800 Joyce Sum, in Arvada, Colorado. NREL is currently leasing space in Golden, Colorado, for conduct of the research actions discussed in the EA. The research project proposed for relocation is the Amorphous silicon Deposition Laboratory (ASDL). Additionally, it may be financially desirable to relocate the Scanning Hartman Optical Tester (SHOT) and the Whole Building Test Facility at a later date, therefore, the consequences of their operation at the proposed facility is evaluated in the EA to support such future decisions. The new location can also provide additional warehouse space required by NREL

Knowledge Transfer and Manufacturing Relocation in International Manufacturing Networks

DEFF Research Database (Denmark)

Madsen, Erik Skov

2014-01-01

This paper is built on six longitudinal case studies of knowledge transfer in manufacturing relocation. By focusing on tacit and explicit knowledge the paper introduces a model for identification of knowledge in relation to four task situations on the shop floor in a manufacturing environment...... after relocation. Finally the paper discusses how “dispatching capacity” and “absorptive capacity” can improve the process....

24 CFR 1003.209 - Prohibition on use of assistance for employment relocation activities.

Science.gov (United States)

2010-04-01

... employment relocation activities. (a) Prohibition. ICDBG funds may not be used to directly assist a business, including a business expansion, in the relocation of a plant, facility, or operation from one Identified... business to undertake one or more of these activities as a condition of the business relocating a facility...

20 CFR 627.215 - Relocation.

Science.gov (United States)

2010-04-01

... the original location. (b) For 120 days after the commencement or the expansion of commercial... original location. (c) For the purposes of this section, relocating establishment means a business entity... review should include names under which the establishment does business, including successors-in-interest...

Divided parents, shared children
Conflicting approaches to relocation disputes in the USA

Directory of Open Access Journals (Sweden)

Theresa Glennon

2008-06-01

Full Text Available Custody relocation disputes pose intractable dilemmas for courts in a highly mobile society. The custodial parent, most often a woman, seeks self-determination, freedom of movement and a continued custodial relationship with the child. The non-custodial parent seeks to preserve a geographically close relationship with the child. Courts must identify the best interests of the children amidst these multiple and conflicting interests. They make decisions that may determine the course of custodial parents’ lives, affecting remarriage, employment, education, and proximity to family. A narrow doctrinal focus on children’s best interests ignores these key aspects of relocation disputes. This article examines the varied legislative and judicial approaches to relocation disputes in the US and proposed principles for resolution of these disputes. It reviews scholarship analyzing relocation disputes from a wide range of perspectives, including: conflicting social science research; competing ideologies of the post-divorce family; alternative dispute resolution; parents’ constitutional rights; domestic violence victims; and proposals to eliminate geographic presumptions and remedy the economic effect of restraints on relocation. Relocation doctrine in the US should be realigned to address these complex perspectives. States should also assist post-divorce families to support children through the common experience of relocation.

24 CFR 570.210 - Prohibition on use of assistance for employment relocation activities.

Science.gov (United States)

2010-04-01

... relocation activities. (a) Prohibition. CDBG funds may not be used to directly assist a business, including a business expansion, in the relocation of a plant, facility, or operation from one LMA to another LMA if the... business to undertake one or more of these activities as a condition of the business relocating a facility...

30 CFR 780.33 - Relocation or use of public roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Relocation or use of public roads. 780.33... PLAN § 780.33 Relocation or use of public roads. Each application shall describe, with appropriate maps... line of any public road, except where mine access or haul roads join that right-of-way; or (b...

Relocating a Company within the EU

DEFF Research Database (Denmark)

Werlauff, Erik

2008-01-01

This article analyses how a public or private limited company can be relocated in another EU country via establishment of a subsidiary in the second country, followed by a reverse vertical merger (the parent ceases to exist and the subsidiary is the continuing company). The consideration for the ...... for the merger is shares in the subsidiary, which can be effected by giving the parent company's shares in the subsidiary to the parent company's shareholders, but after the shares have taken a brief respite in the subsidiary as own shares......This article analyses how a public or private limited company can be relocated in another EU country via establishment of a subsidiary in the second country, followed by a reverse vertical merger (the parent ceases to exist and the subsidiary is the continuing company). The consideration...

The Future of Earthquake Relocation Tools

Science.gov (United States)

Lecocq, T.; Caudron, C.

2010-12-01

Many scientists around the world use earthquake relocation software for their research. Some use "known" software like HYPODD or COMPLOC, while others use their own algorithms and codes. Often, beginners struggle to get one tool running or to properly configure input parameters. This Poster will be witness of debates that will take place during the Meeting, for example adressing questions like "Which program for which application?" ; "Standardized In/Outs?" , "Tectonic / Volcanic / Other ?" ; "All programs inside one single Super-Package?" ; "Common/Base Bibliography for the Relocation-Beginner?" ; "Continuous or Layered Velocity Model?" etc... We will also present the scheme of a Super-Package we are working on, grouping HYPODD [Waldhauser 2001], COMPLOC [Lin&Shearer 2006], LOTOS [Koulakov 2009] ; allowing standard in/outs for the 3 programs, and thus, the comparison of their outputs.

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.; Kalimullah; Hill, D.J.

1986-01-01

The SAS4A code system has been designed for the analysis of the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modelong the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel relocation are emphasized. 12 refs

Factors and aspects of the relocation strategies of companies

Directory of Open Access Journals (Sweden)

Serghei Margulescu

2013-05-01

Full Text Available In the last two decades there have been significant changes in the factors that determine the geographic location or relocation of R &D, production and marketing of all transnational companies. Supply chains have expanded to new areas of the globe and big traditional providers have also expanded their global presence by an increasing trend of co-localization with their main customers. Contract manufacturers have multiplied and strengthened, expanding their geographical distribution. A more obvious trend was that of the geographic dispersion of other global value chain functions such as business services and logistics support functions. Relocation to countries with cheap labor is not always a successful strategy. Therefore the decision to relocate in international geographical area, regardless of the structure formula, offshoring or outsourcing, must be based on a more diverse set of factors.

30 CFR 784.18 - Relocation or use of public roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Relocation or use of public roads. 784.18... PLAN § 784.18 Relocation or use of public roads. Each application shall describe, with appropriate maps...-of-way line of any public road, except where mine access or haul roads join that right-of-way; or (b...

Gender Preference in the Sexual Attractions, Fantasies, and Relationships of Voluntarily Castrated Men.

Science.gov (United States)

Handy, Ariel B; Jackowich, Robyn A; Wibowo, Erik; Johnson, Thomas Wayne; Wassersug, Richard J

2016-03-01

Some men seek castration outside a clear medical need. This study explored how their sexuality changed after castration. To explore changes in preferred gender(s) of sexual attraction, fantasy, and relationships in voluntarily castrated men with or without gonadal hormone therapy. A questionnaire was posted at http://www.eunuch.org that yielded data on men who had been voluntarily castrated physically (n = 198) or chemically (n = 96). Respondents were asked to report retrospectively on their sexuality, including their sexual activity and which gender(s) they were sexually attracted to, fantasized about, or had sexual relations with 6 months to 1 year before and after castration. A substantial proportion of men remained sexually active after castration; 37% had sex at least several times per week. Most respondents did not report a change in preferred gender(s) of attraction (65%, n = 181), fantasies (62%, n = 169), or sexual relationships (66%, n = 163), although approximately 20% to 30% of respondents did report such changes and 8% to 11% became non-sexual after castration. Respondents who were attracted to and fantasized about "only men" or who had sexual relationship with "only women" before castration were the least likely to report a change subsequent to castration. Respondents who were taking neither supplemental testosterone nor estrogen were more likely to report (i) becoming attracted to no one, (ii) fantasizing about no one, and (iii) becoming sexually inactive. Sexual changes in voluntarily castrated men vary and can be influenced by various factors including the use of supplemental testosterone or estrogen therapy. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

The Problem of Faculty Relocation.

Science.gov (United States)

Tabachnick, Stephen E.

1992-01-01

A faculty move to a new campus can be traumatic, but colleges and universities can take steps to lessen the strain. Solutions to faculty relocation problems should be a standard part of any hiring package, not left to chance and individual negotiation. Some problems are inexpensive and easy to solve. (MSE)

75 FR 51048 - Notice of Receipt of Request to Voluntarily Cancel a Pesticide Registration

Science.gov (United States)

2010-08-18

... Voluntarily Cancel a Pesticide Registration AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... cancel a pesticide registration. DATES: Comments must be received on or before September 17, 2010... the registrant to cancel a technical grade active ingredient pesticide product registered under...

Wages and commuting: quasi-natural experiments' evidence from firms that relocate

DEFF Research Database (Denmark)

Mulalic, Ismir; N. Van Ommeren, Jos; Pilegaard, Ninette

We examine workers' compensating differentials for commuting distance in a quasi-natural experiment setting by examining how wages of workers belonging to the same firm respond to changes in commuting distance induced by firm relocations. This setup enables us to test for the relevance of non...... explanations. We focus on wage changes in the year after, as well as three years after, the firm relocation. We demonstrate that a one km increase in commuting distance induces a wage increase of only 0.06 percent in the year after the relocation, but a more substantial wage increase of about 0.2 percent three...

Evaluation of relocation of unionid mussels into artificial ponds

Science.gov (United States)

Newton, T.J.; Monroe, E.M.; Kenyon, R.; Gutreuter, S.; Welke, K.I.; Thiel, P.A.

2001-01-01

Relocation of unionid mussels into refuges (e.g., hatchery ponds) has been suggested as a management tool to protect these animals from the threat of zebra mussel (Dreissena polymorpha) invasion. To evaluate the efficacy of relocation, we experimentally relocated 768 mussels, representing 5 species (Leptodea fragilis, Obliquaria reflexa, Fusconaia flava, Amblema plicata, and Quadrula quadrula) into an earthen pond at a National Fish Hatchery or back into the river. In both locations, mussels were placed into 1 of 4 treatments (mesh bags, corrals, and buried or suspended substrate-filled trays). Mussels were examined annually for survival, growth (shell length and wet mass), and physiological condition (glycogen concentration in foot and mantle and tissue condition index) for 36 mo in the pond or 40 mo in the river. We observed significant differences in mortality rates between locations (mortality was 4 times greater in the pond than in the river), among treatments (lowest mortality in the suspended trays), and among species (lower mortality in the amblemines than lamp-silines). Overall survival in both locations averaged 80% the 1st year; survival in the pond decreased dramatically after that. Although length and weight varied between locations and over time, these changes were small, suggesting that their utility as short-term measures of well being in long-lived unionids is questionable. Mussels relocated to the pond were in poor physiological condition relative to those in the river, but the magnitude of these differences was small compared to the inherent variability in physiological condition of reference mussels. These data suggest that relocation of unionids into artificial ponds is a high-risk conservation strategy; alternatives such as introduction of infected host fish, identification of mussel beds at greatest risk from zebra mussels, and a critical, large-scale assessment of the factors contributing to their decline should be explored.

Short-Period Surface Wave Based Seismic Event Relocation

Science.gov (United States)

White-Gaynor, A.; Cleveland, M.; Nyblade, A.; Kintner, J. A.; Homman, K.; Ammon, C. J.

2017-12-01

Accurate and precise seismic event locations are essential for a broad range of geophysical investigations. Superior location accuracy generally requires calibration with ground truth information, but superb relative location precision is often achievable independently. In explosion seismology, low-yield explosion monitoring relies on near-source observations, which results in a limited number of observations that challenges our ability to estimate any locations. Incorporating more distant observations means relying on data with lower signal-to-noise ratios. For small, shallow events, the short-period (roughly 1/2 to 8 s period) fundamental-mode and higher-mode Rayleigh waves (including Rg) are often the most stable and visible portion of the waveform at local distances. Cleveland and Ammon [2013] have shown that teleseismic surface waves are valuable observations for constructing precise, relative event relocations. We extend the teleseismic surface wave relocation method, and apply them to near-source distances using Rg observations from the Bighorn Arche Seismic Experiment (BASE) and the Earth Scope USArray Transportable Array (TA) seismic stations. Specifically, we present relocation results using short-period fundamental- and higher-mode Rayleigh waves (Rg) in a double-difference relative event relocation for 45 delay-fired mine blasts and 21 borehole chemical explosions. Our preliminary efforts are to explore the sensitivity of the short-period surface waves to local geologic structure, source depth, explosion magnitude (yield), and explosion characteristics (single-shot vs. distributed source, etc.). Our results show that Rg and the first few higher-mode Rayleigh wave observations can be used to constrain the relative locations of shallow low-yield events.

Post-accident fuel relocation and heat removal in the LMFBR

International Nuclear Information System (INIS)

Kazimi, M.S.; Tsai, S.S.; Gasser, R.D.

1976-08-01

Assessment of the dynamics of post-accident fuel relocation and heat removal is an important aspect of the evaluation of the consequences of a hypothetical accident in an LMFBR. Such an assessment is of particular importance in the evaluation of the post-accident radiological doses around the reactor site. In the present evaluation particular attention is given to the design features of the Clinch River Breeder Reactor Plant (CRBR). Fuel relocation and heat removal, assuming certain conditions have resulted in core disruption, are discussed. The discussion of events and phenomena involved in the relocation processes is centered around the resulting patterns of heat source distribution. The factors influencing fuel relocation and distribution in the inlet and outlet plena of the reactor vessel are discussed. The current technology of in-vessel heat removal is applied to the design of the CRBR reactor. Both fuel debris cooling limits and overall coolant flow in the reactor under natural convection conditions are explored. Some of the uncertainties in ex-vessel fuel behavior are addressed. In particular, the effect of melting the cavity bed on the rate of growth of a molten fuel pool is investigated

Understanding the Experiences of Relocatees During Forced Relocation in Chinese Urban Restructuring

NARCIS (Netherlands)

Li, X.; van Ham, M.; Kleinhans, R.J.

Despite the massive forced relocation of residents during urban restructuring in China, there are no systematic studies on how residents undergo the process. Most studies concerning urban restructuring in China directly equate forced relocation with displacement, which has a negative connotation.

Clinical validity of a relocation stress scale for the families of patients transferred from intensive care units.

Science.gov (United States)

Oh, HyunSoo; Lee, Seul; Kim, JiSun; Lee, EunJu; Min, HyoNam; Cho, OkJa; Seo, WhaSook

2015-07-01

This study was conducted to develop a family relocation stress scale by modifying the Son's Relocation Stress Syndrome Scale, to examine its clinical validity and reliability and to confirm its suitability for measuring family relocation stress. The transfer of ICU patients to general wards is a significant anxiety-producing event for family members. However, no relocation stress scale has been developed specifically for families. A nonexperimental, correlation design was adopted. The study subjects were 95 family members of 95 ICU patients at a university hospital located in Incheon, South Korea. Face and construct validities of the devised family relocation stress scale were examined. Construct validity was examined using factor analysis and by using a nomological validity test. Reliability was also examined. Face and content validity of the scale were verified by confirming that its items adequately measured family relocation stress. Factor analysis yielded four components, and the total variance explained by these four components was 63·0%, which is acceptable. Nomological validity was well supported by significant relationships between relocation stress and degree of preparation for relocation, patient self-care ability, family burden and satisfaction with the relocation process. The devised scale was also found to have good reliability. The family relocation stress scale devised in this study was found to have good validity and reliability, and thus, is believed to offer a means of assessing family relocation stress. The findings of this study provide a reliable and valid assessment tool when nurses prepare families for patient transfer from an ICU to a ward setting, and may also provide useful information to those developing an intervention programme for family relocation stress management. © 2015 John Wiley & Sons Ltd.

Nest enlargement in leaf-cutting ants: relocated brood and fungus trigger the excavation of new chambers.

Directory of Open Access Journals (Sweden)

Daniela Römer

Full Text Available During colony growth, leaf-cutting ants enlarge their nests by excavating tunnels and chambers housing their fungus gardens and brood. Workers are expected to excavate new nest chambers at locations across the soil profile that offer suitable environmental conditions for brood and fungus rearing. It is an open question whether new chambers are excavated in advance, or will emerge around brood or fungus initially relocated to a suitable site in a previously-excavated tunnel. In the laboratory, we investigated the mechanisms underlying the excavation of new nest chambers in the leaf-cutting ant Acromyrmex lundi. Specifically, we asked whether workers relocate brood and fungus to suitable nest locations, and to what extent the relocated items trigger the excavation of a nest chamber and influence its shape. When brood and fungus were exposed to unfavorable environmental conditions, either low temperatures or low humidity, both were relocated, but ants clearly preferred to relocate the brood first. Workers relocated fungus to places containing brood, demonstrating that subsequent fungus relocation spatially follows the brood deposition. In addition, more ants aggregated at sites containing brood. When presented with a choice between two otherwise identical digging sites, but one containing brood, ants' excavation activity was higher at this site, and the shape of the excavated cavity was more rounded and chamber-like. The presence of fungus also led to the excavation of rounder shapes, with higher excavation activity at the site that also contained brood. We argue that during colony growth, workers preferentially relocate brood to suitable locations along a tunnel, and that relocated brood spatially guides fungus relocation and leads to increased digging activity around them. We suggest that nest chambers are not excavated in advance, but emerge through a self-organized process resulting from the aggregation of workers and their density

75 FR 44256 - Rotenone; Notice of Receipt of Requests to Voluntarily Cancel Pesticide Registrations

Science.gov (United States)

2010-07-28

... that would merit its further review of the requests, or unless the registrants withdraw their requests. If these requests are granted, any sale, distribution, or use of products listed in this notice will... voluntarily cancel their rotenone registrations. The requests would not terminate the last rotenone products...

Nest relocation and excavation in the Florida harvester ant, Pogonomyrmex badius.

Directory of Open Access Journals (Sweden)

Walter R Tschinkel

Full Text Available The Florida harvester ant (Pogonomyrmex badius excavates deep nests in the sandy soils of the Gulf and Atlantic coastal plains. Nest relocations of over 400 colonies in a north Florida coastal plains pine forest were tracked and mapped from 2010 to 2013. Individual colonies varied from one move in two years to four times a year, averaging about one per year. Almost all moves occurred between May and November peaking in July when more than 1% of the colonies moved per day. Move directions were random, and averaged 4 m, with few moves exceeding 10 m. Distance moved was not related to colony size. Over multiple moves, paths were random walks around the original nest location. Relocation is probably intrinsic to the life history of this species, and the causes of relocation remain obscure--the architecture of old and new nests was very similar, and neither the forest canopy nor the density or size of neighbors was correlated with relocation. Monitoring entire relocations (n = 20 showed that they were usually completed in 4 to 6 days. Moves were diurnal, peaking in the mornings and afternoons dipping during mid-day, and ceasing before sundown. Workers excavated the new nest continuously during the daytime throughout the move and beyond. A minority of workers carried seeds, charcoal and brood, with seeds being by far the most common burden. The proportion of burdened workers increased throughout the move. Measured from year to year, small colonies gained size and large ones lost it. Colonies moving more than once in two years lost more size than those moving less often, suggesting that moving may bear a fitness cost. Colony relocation is a dramatic and consistent feature of the life history of the Florida harvester ant, inviting inquiry into its proximal and ultimate causes.

Reexamining the Impact of Employee Relocation Assistance on Housing Prices

OpenAIRE

Marcus T. Allen; Ronald C. Rutherford; Thomas M. Springer

1997-01-01

In this paper, we reexamine the issue of whether corporate relocation assistance programs for transferred employees significantly affect sale prices of single-family homes. We estimate a hedonic price equation that includes physical housing characteristics, location factors, occupancy status, and type of seller for a sample of 2,441 transactions. Seller types include (a) transferred employees who were given direct relocation assistance, (b) transferred employees who were not given direct relo...

Technique for estimating relocated gap width for gap conductance calculations

International Nuclear Information System (INIS)

Klink, P.H.

1978-01-01

Thermally induced fuel fragmentation and relocation has been demonstrated to influence the thermal behavior of a fuel rod in two ways. The effective fuel pellet conductivity is decreased and pellet-to-cladding heat transfer is improved. This paper presents a correlation between as-built and relocated gap width which, used with the Ross and Stoute Gap Conductance Correlation and an appropriate fuel thermal expansion model, closely predicts the measured gap conductances

Moving as a gift: relocation in older adulthood.

Science.gov (United States)

Perry, Tam E

2014-12-01

While discussions of accessibility, mobility and activities of daily living frame relocation studies, in older adulthood, the paper explores the emotional motivation of gift giving as a rationale for moving. This ethnographic study investigates the processes of household disbandment and decision-making of older adults in the Midwestern United States relocating in post-Global Financial Crisis contexts. In this study, relationships are created and sustained through the process of moving, linking older adults (n=81), their kin (n=49), and professionals (n=46) in the Midwestern United States. Using Marcel Mauss' The Gift (1925/1990) as a theoretical lens, relocation in older adulthood is conceptualized as a gift in two ways: to one's partner, and one's kin. Partners may consider gift-giving in terms of the act of moving to appease and honor their partner. Kin who were not moving themselves were also recipients of the gift of moving. These gifts enchain others in relationships of reciprocity. However these gifts, like all gifts, are not without costs or danger, so this paper examines some of the challenges that emerge along with gift-giving. Copyright © 2014 Elsevier Inc. All rights reserved.

Analysis of core degradation and relocation phenomena and scenarios in a Nordic-type BWR

Energy Technology Data Exchange (ETDEWEB)

Galushin, Sergey, E-mail: galushin@kth.se; Kudinov, Pavel, E-mail: pkudinov@kth.se

2016-12-15

Highlights: • A data base of the debris properties in lower plenum generated using MELCOR code. • The timing of safety systems has significant effect on the relocated debris properties. • Loose coupling between core relocation and vessel failure analyses was established. - Abstract: Severe Accident Management (SAM) in Nordic Boiling Water Reactors (BWR) employs ex-vessel cooling of core melt debris. The melt is released from the failed vessel and poured into a deep pool of water located under the reactor. The melt is expected to fragment, quench, and form a debris bed, coolable by a natural circulation and evaporation of water. Success of the strategy is contingent upon melt release conditions from the vessel and melt-coolant interaction that determine (i) properties of the debris bed and its coolability (ii) potential for energetic melt-coolant interactions (steam explosions). Risk Oriented Accident Analysis Methodology (ROAAM+) framework is currently under development for quantification of the risks associated with formation of non-coolable debris bed and occurrence of steam explosions, both presenting a credible threats to containment integrity. The ROAAM+ framework consist of loosely coupled models that describe each stage of the accident progression. Core relocation analysis framework provides initial conditions for melt vessel interaction, vessel failure and melt release frameworks. The properties of relocated debris and melt release conditions, including in-vessel and ex-vessel pressure, lower drywell pool depth and temperature, are sensitive to the accident scenarios and timing of safety systems recovery and operator actions. This paper illustrates a methodological approach and relevant data for establishing a connection between core relocation and vessel failure analysis in ROAAM+ approach. MELCOR code is used for analysis of core degradation and relocation phenomena. Properties of relocated debris are obtained as functions of the accident scenario

78 FR 2319 - Relocation of Regulations

Science.gov (United States)

2013-01-11

...) operations; and Bank assistance for the Resolution Funding Corporation (RefCorp). This final rule relocates... Board Part 996/FHFA Part 1271--Subpart E (Authority for Bank Assistance of the Resolution Funding... National Mortgage Association and any affiliate thereof, and any Federal Home Loan Bank. Resolution Funding...

"People over profits": retailers who voluntarily ended tobacco sales.

Science.gov (United States)

McDaniel, Patricia A; Malone, Ruth E

2014-01-01

Tobacco retailers are key players in the ongoing tobacco epidemic. Tobacco outlet density is linked to a greater likelihood of youth and adult smoking and greater difficulty quitting. While public policy efforts to address the tobacco problem at the retail level have been limited, some retailers have voluntarily ended tobacco sales. A previous pilot study examined this phenomenon in California, a state with a strong tobacco program focused on denormalizing smoking and the tobacco industry. We sought to learn what motivated retailers in other states to end tobacco sales and how the public and media responded. We conducted interviews with owners, managers, or representatives of six grocery stores in New York and Ohio that had voluntarily ended tobacco sales since 2007. We also conducted unobtrusive observations at stores and analyzed media coverage of each retailer's decision. Grocery store owners ended tobacco sales for two reasons, alone or in combination: health or ethics-related, including a desire to send a consistent health message to employees and customers, and business-related, including declining tobacco sales or poor fit with the store's image. The decision to end sales often appeared to resolve troubling contradictions between retailers' values and selling deadly products. New York retailers attributed declining sales to high state tobacco taxes. All reported largely positive customer reactions and most received media coverage. Forty-one percent of news items were letters to the editor or editorials; most (69%) supported the decision. Voluntary decisions by retailers to abandon tobacco sales may lay the groundwork for mandatory policies and further denormalize tobacco. Our study also suggests that high tobacco taxes may have both direct and indirect effects on tobacco use. Highlighting the contradictions between being a responsible business and selling deadly products may support voluntary decisions by retailers to end tobacco sales.

Relocation of belt conveyors along the final slope of the Belacevac surface coal mine

Energy Technology Data Exchange (ETDEWEB)

Maksimovic, N; Rosic, Z

1987-07-01

Describes how following a landslide on the northern wing of the Belacevac surface coal mine the belt conveyor lines had to be relocated in order to assure a reliable coal supply to the Kosovo A and Kosovo B thermal power stations. The relocation was achieved in three phases with new approach cuts being made, necessitating the removal of 280,000 m/sup 3/ of overburden in the first phase and 870,000 m/sup 3/ in the second phase of the reconstruction. Illustrates the relocation of the conveyor system by means of site plans and notes that the production of coal and the removal of overburden were not interrupted during the relocation exercise. 2 refs.

Who contributes voluntarily to OSS? An investigation among German IT employees

DEFF Research Database (Denmark)

Bitzer, Jürgen; Geishecker, Ingo

2010-01-01

Based on newly assembled survey data, we analyze which individual characteristics of IT employees are associated with the willingness to participate voluntarily in Open Source Software (OSS) projects. We find that, contrary to common expectations, formal educational attainment is not positively...... voluntary OSS contributions during leisure time. Although one has to be cautious regarding the direction of causality, we interpret this as evidence of career-oriented motives in voluntary OSS contributors. The finding is also reinforced by our more specific analysis of the importance of such motives...

Performance Analysis of a Forecasting Relocation Model for One-Way Carsharing

Directory of Open Access Journals (Sweden)

Ganjar Alfian

2017-06-01

Full Text Available A carsharing service can be seen as a transport alternative between private and public transport that enables a group of people to share vehicles based at certain stations. The advanced carsharing service, one-way carsharing, enables customers to return the car to another station. However, one-way implementation generates an imbalanced distribution of cars in each station. Thus, this paper proposes forecasting relocation to solve car distribution imbalances for one-way carsharing services. A discrete event simulation model was developed to help evaluate the proposed model performance. A real case dataset was used to find the best simulation result. The results provide a clear insight into the impact of forecasting relocation on high system utilization and the reservation acceptance ratio compared to traditional relocation methods.

Cracking and relocation of UO2 fuel during nuclear operation

International Nuclear Information System (INIS)

Appelhans, A.D.; Dagbjartsson, S.J.

1981-01-01

Cracking and relocation of light water reactor (LWR) fuel pellets affect the axial gas flow path within nuclear reactor fuel rods and the thermal performance of the fuel. As part of the Nuclear Regulatory Commission's Water Reactor Safety Research Fuel Behavior Program, the Thermal Fuels Behavior Program of EG and G Idaho, Inc., is conducting fuel rod behavior studies in the Heavy Boiling Water Reactor in Halden, Norway. The Instrumental Fuel Assembly-430 (IFA-430) operated in that facility is a multipurpose assembly designed to provide information on fuel cracking and relocation, the long-term thermal response of LWR fuel rods subjected to various internal pressures and gas compositions, and the release of fission gases. This report presents the results of an analysis of fuel cracking and relocation phenomena as deduced from fuel rod axial gas flow and fuel temperature data from the first 6.5 GWd/tUO 2 burnup of the IFA-430

41 CFR 302-12.101 - May we enter into a contract with a relocation services company for the company to provide...

Science.gov (United States)

2010-07-01

... contract with a relocation services company for the company to provide relocation services? 302-12.101... the company to provide relocation services? Yes, you may enter into a contract with a relocation services company for the company to provide relocation services. ...

RelocaTE2: a high resolution transposable element insertion site mapping tool for population resequencing

Directory of Open Access Journals (Sweden)

Jinfeng Chen

2017-01-01

Full Text Available Background Transposable element (TE polymorphisms are important components of population genetic variation. The functional impacts of TEs in gene regulation and generating genetic diversity have been observed in multiple species, but the frequency and magnitude of TE variation is under appreciated. Inexpensive and deep sequencing technology has made it affordable to apply population genetic methods to whole genomes with methods that identify single nucleotide and insertion/deletion polymorphisms. However, identifying TE polymorphisms, particularly transposition events or non-reference insertion sites can be challenging due to the repetitive nature of these sequences, which hamper both the sensitivity and specificity of analysis tools. Methods We have developed the tool RelocaTE2 for identification of TE insertion sites at high sensitivity and specificity. RelocaTE2 searches for known TE sequences in whole genome sequencing reads from second generation sequencing platforms such as Illumina. These sequence reads are used as seeds to pinpoint chromosome locations where TEs have transposed. RelocaTE2 detects target site duplication (TSD of TE insertions allowing it to report TE polymorphism loci with single base pair precision. Results and Discussion The performance of RelocaTE2 is evaluated using both simulated and real sequence data. RelocaTE2 demonstrate high level of sensitivity and specificity, particularly when the sequence coverage is not shallow. In comparison to other tools tested, RelocaTE2 achieves the best balance between sensitivity and specificity. In particular, RelocaTE2 performs best in prediction of TSDs for TE insertions. Even in highly repetitive regions, such as those tested on rice chromosome 4, RelocaTE2 is able to report up to 95% of simulated TE insertions with less than 0.1% false positive rate using 10-fold genome coverage resequencing data. RelocaTE2 provides a robust solution to identify TE insertion sites and can be

41 CFR 302-2.3 - What determines my entitlements and allowances for relocation?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What determines my entitlements and allowances for relocation? 302-2.3 Section 302-2.3 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 2-EMPLOYEES ELIGIBILITY REQUIREMENTS...

Study of seismicity around Toba area based on relocation hypocenter result from BMKG catalogue

Energy Technology Data Exchange (ETDEWEB)

Ramdhan, Mohamad [Indonesia' s Agency for Meteorology, Climatology and Geophysics (BMKG) Jl. Angkasa 1 No. 2 Kemayoran, Jakarta Pusat, 10720 (Indonesia); Nugraha, Andri Dian [Global Geophysics Research Group, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung, Indonesia, Jl. Ganesa 10, Bandung, 40132 (Indonesia)

2013-09-09

Toba area has complex tectonic setting attracting many earth scientists to study and understand tectonic and geological process or setting. The area is affected by oblique subduction zone, Renun Sumatran fault sub segment and some volcanoes that are near it. The earthquake catalogue provided by BMKG from April, 2009 to December, 2011 must be relocated firstly to get the precise hypocenter. We used catalogue data of P and S phase or P phase only and double-difference method to relocate the earthquakes. The results show hypocenter position enhancement that can be interpreted tectonically. The earthquakes after relocation relating to the Sumatran fault, subduction zone, volcanoes and seismic activities beneath Toba caldera can be mapped clearly. The relocated hypocenters in this study are very important to provide information for seismic hazard assessment and disaster mitigation study.

Multiple intra-hospital transports during relocation to a new critical care unit.

Science.gov (United States)

O'Leary, R-A; Conrick-Martin, I; O'Loughlin, C; Curran, M-R; Marsh, B

2017-11-01

Intra-hospital transport (IHT) of critically ill patients is associated with morbidity and mortality. Mass transfer of patients, as happens with unit relocation, is poorly described. We outline the process and adverse events associated with the relocation of a critical care unit. Extensive planning of the relocation targeted patient and equipment transfer, reduction in clinical pressure prior to the event and patient care during the relocation phase. The setting was a 30-bed, tertiary referral, combined medical and surgical critical care unit, located in a 570-bed hospital that serves as the national referral centre for cardiothoracic surgery and spinal injuries. All stakeholders relevant to the critical care unit relocation were involved, including nursing and medical staff, porters, information technology services, laboratory staff, project development managers, pharmacy staff and building contractors. Mortality at discharge from critical care unit and discharge from hospital were the main outcome measures. A wide range of adverse events were prospectively recorded, as were transfer times. Twenty-one patients underwent IHT, with a median transfer time of 10 min. Two transfers were complicated by equipment failure and three patients experienced an episode of hypotension requiring intervention. There were no cases of central venous or arterial catheter or endotracheal tube dislodgement, and hospital mortality at 30 days was 14%. Although IHT is associated with morbidity and mortality, careful logistical planning allows for efficient transfer with low complication rates.

41 CFR 302-3.508 - What relocation expenses are not authorized for new appointees or student trainees?

Science.gov (United States)

2010-07-01

... are not authorized for new appointees or student trainees? 302-3.508 Section 302-3.508 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES RELOCATION... relocation expenses are not authorized for new appointees or student trainees? You must not pay any expenses...

33 CFR 150.515 - What are the requirements for weight testing of newly installed or relocated craft?

Science.gov (United States)

2010-07-01

... weight testing of newly installed or relocated craft? 150.515 Section 150.515 Navigation and Navigable... testing of newly installed or relocated craft? (a) The operator must perform installation weight testing... (a) of this section, when survival crafts are relocated to another deepwater port. ...

Association of Violence against Partner and Former Victim Experiences: A Sample of Clients Voluntarily Attending Therapy

Science.gov (United States)

Askeland, Ingunn Rangul; Evang, Are; Heir, Trond

2011-01-01

The authors addressed the associations between childhood and adolescence victimization and partner violence in adulthood. Data were collected on 480 men voluntarily attending therapy with a semistructured interview that assessed (a) violent behavior, categorized as physical violence, physical controlling behavior, property violence,…

Performance Evaluation of Resilience using Service Relocation for GMPLS Networks

DEFF Research Database (Denmark)

Wessing, Henrik; Herrmann, Sven; Ruepp, Sarah Renée

2015-01-01

Cloud computing today represents an ever increasing part of the data exchanged over the Internet. This influences the core network, where the special properties of cloud based services can be leveraged to increase the network efficiency. This paper explores the concept of relocation for the backup...... path when providing resiliency to cloud services in the network. The control plane of a GMPLSenabled optical network is simulated, thus evaluating the proposed Path Computation Element architecture for service relocation. The results show that for increased offered traffic in the network, the overall...

Job Relocation is High in Chemical Industry.

Science.gov (United States)

Chemical and Engineering News, 1979

1979-01-01

The chances of an employee being relocated are higher in the chemical and plastics industries than in U.S. business as a whole. But the benefits provided by chemical and plastics companies to employees shifted to other locations are generally better than average. (Author/BB)

41 CFR 302-2.8 - When must I complete all aspects my relocation?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false When must I complete all aspects my relocation? 302-2.8 Section 302-2.8 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 2-EMPLOYEES ELIGIBILITY REQUIREMENTS General Rules Time...

Modularization of Legacy Features by Relocation and Reconceptualization: How Much is Enough?

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2012-01-01

and reconceptualization of classes during a migration of the NDVis neuroscience application to the NetBeans module system. We do this by comparing the manually-modularized version of NDVis with three automatically-optimized designs that exhibit various degrees of relocation and reconceptualization. The obtained findings...... shed new light on the actual extent and impact of relocation and reconceptualization during modularization of legacy features....

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.

1985-01-01

SAS4A is a new code system which has been designed for analyzing the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modeling the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel motion experiment analyses are also presented

Comparative study of human mitochondrial proteome reveals extensive protein subcellular relocalization after gene duplications

Directory of Open Access Journals (Sweden)

Huang Yong

2009-11-01

Full Text Available Abstract Background Gene and genome duplication is the principle creative force in evolution. Recently, protein subcellular relocalization, or neolocalization was proposed as one of the mechanisms responsible for the retention of duplicated genes. This hypothesis received support from the analysis of yeast genomes, but has not been tested thoroughly on animal genomes. In order to evaluate the importance of subcellular relocalizations for retention of duplicated genes in animal genomes, we systematically analyzed nuclear encoded mitochondrial proteins in the human genome by reconstructing phylogenies of mitochondrial multigene families. Results The 456 human mitochondrial proteins selected for this study were clustered into 305 gene families including 92 multigene families. Among the multigene families, 59 (64% consisted of both mitochondrial and cytosolic (non-mitochondrial proteins (mt-cy families while the remaining 33 (36% were composed of mitochondrial proteins (mt-mt families. Phylogenetic analyses of mt-cy families revealed three different scenarios of their neolocalization following gene duplication: 1 relocalization from mitochondria to cytosol, 2 from cytosol to mitochondria and 3 multiple subcellular relocalizations. The neolocalizations were most commonly enabled by the gain or loss of N-terminal mitochondrial targeting signals. The majority of detected subcellular relocalization events occurred early in animal evolution, preceding the evolution of tetrapods. Mt-mt protein families showed a somewhat different pattern, where gene duplication occurred more evenly in time. However, for both types of protein families, most duplication events appear to roughly coincide with two rounds of genome duplications early in vertebrate evolution. Finally, we evaluated the effects of inaccurate and incomplete annotation of mitochondrial proteins and found that our conclusion of the importance of subcellular relocalization after gene duplication on

A microwave powered sensor assembly for microwave ovens

DEFF Research Database (Denmark)

2016-01-01

The present invention relates to a microwave powered sensor assembly for micro- wave ovens. The microwave powered sensor assembly comprises a microwave antenna for generating an RF antenna signal in response to microwave radiation at a predetermined excitation frequency. A dc power supply circuit...... of the microwave powered sensor assembly is operatively coupled to the RF antenna signal for extracting energy from the RF antenna signal and produce a power supply voltage. A sensor is connected to the power supply voltage and configured to measure a physical or chemical property of a food item under heating...... in a microwave oven chamber....

Microwave engineering

CERN Document Server

Pozar, David M

2012-01-01

The 4th edition of this classic text provides a thorough coverage of RF and microwave engineering concepts, starting from fundamental principles of electrical engineering, with applications to microwave circuits and devices of practical importance.  Coverage includes microwave network analysis, impedance matching, directional couplers and hybrids, microwave filters, ferrite devices, noise, nonlinear effects, and the design of microwave oscillators, amplifiers, and mixers. Material on microwave and RF systems includes wireless communications, radar, radiometry, and radiation hazards. A large

77 FR 1684 - Imidacloprid, Oxamyl, and Methomyl; Notice of Receipt of Requests to Voluntarily Amend Pesticide...

Science.gov (United States)

2012-01-11

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2011-0933; FRL-9328-2] Imidacloprid, Oxamyl, and... issuing a notice of receipt of requests by registrants to voluntarily amend certain imidacloprid product... would not terminate the last imidacloprid, oxamyl, or methomyl products registered for use in the United...

“People over Profits”: Retailers Who Voluntarily Ended Tobacco Sales

Science.gov (United States)

McDaniel, Patricia A.; Malone, Ruth E.

2014-01-01

Background Tobacco retailers are key players in the ongoing tobacco epidemic. Tobacco outlet density is linked to a greater likelihood of youth and adult smoking and greater difficulty quitting. While public policy efforts to address the tobacco problem at the retail level have been limited, some retailers have voluntarily ended tobacco sales. A previous pilot study examined this phenomenon in California, a state with a strong tobacco program focused on denormalizing smoking and the tobacco industry. We sought to learn what motivated retailers in other states to end tobacco sales and how the public and media responded. Methods We conducted interviews with owners, managers, or representatives of six grocery stores in New York and Ohio that had voluntarily ended tobacco sales since 2007. We also conducted unobtrusive observations at stores and analyzed media coverage of each retailer’s decision. Results Grocery store owners ended tobacco sales for two reasons, alone or in combination: health or ethics-related, including a desire to send a consistent health message to employees and customers, and business-related, including declining tobacco sales or poor fit with the store’s image. The decision to end sales often appeared to resolve troubling contradictions between retailers’ values and selling deadly products. New York retailers attributed declining sales to high state tobacco taxes. All reported largely positive customer reactions and most received media coverage. Forty-one percent of news items were letters to the editor or editorials; most (69%) supported the decision. Conclusion Voluntary decisions by retailers to abandon tobacco sales may lay the groundwork for mandatory policies and further denormalize tobacco. Our study also suggests that high tobacco taxes may have both direct and indirect effects on tobacco use. Highlighting the contradictions between being a responsible business and selling deadly products may support voluntary decisions by retailers

An Updated Earthquake Relocation Catalog for the Island of Hawaíi from 2009 to 2016

Science.gov (United States)

Lin, G.; Okubo, P.; Shearer, P. M.; Matoza, R. S.

2017-12-01

We present an updated catalog of Hawaiian seismicity, systematically relocated from a starting catalog compiled by the Hawaiian Volcano Observatory (HVO). This is a continuation of our collaboration that began with relocating Hawaiian seismicity from 1992 through April 2009 and subsequently added 1986 through 1991, all initially processed with HVO's Caltech-USGS Seismic Processing systems. Our current efforts are initially focused on extending waveform cross-correlation analyses to significantly greater numbers of candidate event pairs of earthquakes recorded since 2009, after HVO migrated to its ANSS Quake Management Software (AQMS) systems. In its roughly 8 years of AQMS processing, HVO has cataloged over 170,000 events. Particular challenges with this more recent dataset relate to field network upgrades that introduced numerous broadband sensors to replace short-period instruments and significantly increased numbers of event triggers. A relatively low percentage of interactively-reviewed events compared to the pre-2009 catalogs also presents a significant challenge to our analysis. We start by ray tracing through a previously developed three-dimensional (3-D) seismic velocity model to relocate all the earthquakes with phase arrivals. We then use these 3-D relocated events, with improved absolute locations, as reference events to perform similar-event cluster analysis and differential-time relative relocation to all the available events in the data set. The resulting catalog of relocated, well-constrained hypocenters is an extension of our previous studies. Combined with earlier products of our systematic catalog relocations, the increased numbers of relocated earthquakes from more than 30 years of seismic monitoring offer enhanced opportunities for study and interpretation of seismic and volcanic processes spanning the entire 1986-2016 interval.

The managerial issues related to transferring shop floor knowledge in manufacturing relocation

DEFF Research Database (Denmark)

Knudsen, Mette Præst; Madsen, Erik Skov

2014-01-01

Purpose – The purpose of this paper is to explore the specific practices of management in the dispatching unit and to identify mechanisms for supporting transfer of shop floor knowledge embedded in operating manufacturing equipment. Design/methodology/approach – The paper applies an inductive...... and a case study approach for exploring three empirical cases that represent different manufacturing facility relocation processes and differences in the applied managerial practices. Findings – The paper identifies two important gaps in international production literature when firms relocate equipment...... to other sites; a time gap (from dismantling to re-assembly of production facilities) and a space gap (from the current to the new site abroad). These gaps are important for understanding why relocation processes are difficult and what management can do to facilitate such processes. Practical implications...

41 CFR 302-3.2 - As a new appointee or student trainee what relocation expenses may my agency pay or reimburse me...

Science.gov (United States)

2010-07-01

... student trainee what relocation expenses may my agency pay or reimburse me for incident to a permanent... Management Federal Travel Regulation System RELOCATION ALLOWANCES RELOCATION ALLOWANCES 3-RELOCATION ALLOWANCE BY SPECIFIC TYPE New Appointee § 302-3.2 As a new appointee or student trainee what relocation...

Habitat use and home range traits of resident and relocated hares (Lepus europaeus, Pallas

Directory of Open Access Journals (Sweden)

Marco Bagliacca

2010-09-01

Full Text Available The aim of the study was to know the habitat preferences and home range of resident and relocated brown hares during the no hunting period. The trial was carried out in a protected area (PA and in a free hunting territory (FHT, both located in Florence province. During captures 21 hares were equipped with a necklace radio tag: 7 hares, resident group, were released in the same area of capture and 14 hares, relocated group, were relocated in six different locations within the FHT. The effect of place of release was analyzed by ANOVA and/or non parametric methods. Results showed that the home ranges of the resident group were characterised by a greater presence of fallow land and shrub land than relocated group (P< 0.05. Home range sizes and Max distances from the releasing sites differed between the two groups. Resident hares preferred landscape characterized by a higher density of patches than the relocated hares (152 vs. 70 n/100ha, 43 vs. 12 n/100ha, 4703 vs. 8142 sq.m respectively; P<0.01. The landscape structure indexes, the home range sizes and the maximum distance from the releasing sites suggest that the relocated hares even if released in suited habitats, will move from their releasing point to look for better habitats. Landscape with most complexity are preferred from the resident hare, and this result should be consider when a project to reintroduction of this lagomorph in a territory is programmed, or when it is necessary to improve the dynamic of a natural population.

Using an ecological ethics framework to make decisions about the relocation of wildlife.

Science.gov (United States)

McCoy, Earl D; Berry, Kristin

2008-12-01

Relocation is an increasingly prominent conservation tool for a variety of wildlife, but the technique also is controversial, even among conservation practitioners. An organized framework for addressing the moral dilemmas often accompanying conservation actions such as relocation has been lacking. Ecological ethics may provide such a framework and appears to be an important step forward in aiding ecological researchers and biodiversity managers to make difficult moral choices. A specific application of this framework can make the reasoning process more transparent and give more emphasis to the strong sentiments about non-human organisms held by many potential users. Providing an example of the application of the framework may also increase the appeal of the reasoning process to ecological researchers and biodiversity managers. Relocation as a conservation action can be accompanied by a variety of moral dilemmas that reflect the interconnection of values, ethical positions, and conservation decisions. A model that is designed to address moral dilemmas arising from relocation of humans provides/demonstrates/illustrates a possible way to apply the ecological ethics framework and to involve practicing conservationists in the overall decision-making process.

Solving the Problem of Relocation of Residents from Old and Unfit Housing Stock

Directory of Open Access Journals (Sweden)

Prokopovich Vladimir Pavlovich

2014-06-01

Full Text Available The speed of construction does not solve the problem of relocating the residents from old and unfit housing stock, the number of which exceeds the maximum permissible values. To assess housing stock condition, the author uses a model describing the path traversed by an accelerated body. The graphic analogue of model is a coil spring with a variable, increasing step, from which it follows that the volume of old and unfit housing stock is growing exponentially. The proposed model helps to project possible consequences of slow relocation, to plan necessary annual volume of new construction for relocation of the residents, as well as to assess the additional resources for preventing accidents.

Coverage improvement in clustered wireless sensor networks by relocating mobile nodes based on waypoints

DEFF Research Database (Denmark)

Mathur, Prateek; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

2013-01-01

by clusters with relocation of mobile nodes between the clusters. Mobile nodes are guided by waypoints between source and destination clusters without use of localization services. The simulation results have been presented which state the effectiveness of the proposed approach. Mobile node relocation has...

Thermal behavior of molten corium during TMI-2 core relocation event

International Nuclear Information System (INIS)

Anderson, J.L.; Sienicki, J.J.

1988-01-01

During the TMI-2 accident, a pool of molten corium formed in the central region of the core and was contained by solidified crusts. Failure of the crust surrounding the molten material, at approximately 224 min, resulted in a relocation of an estimated 20-25 tons of molten corium through peripheral fuel assemblies in the east side of the vessel, as well as through the core barrel assembly (CBA) at the periphery of the core. This paper presents the results of an analyses carried out to investigate the thermal interactions of molten corium with the CBA structures during the relocation event. The principal objectives of the analyses are: (a) to assess the potential for relocation to take place through the CBA versus the flow of molten core material directly downward through the core via the fuel assemblies; and (b) to understand the distribution of prior molten corium observed during vessel defueling examinations. 5 refs., 1 fig

Optimal timing for managed relocation of species faced with climate change

Science.gov (United States)

McDonald Madden, Eve; Runge, Michael C.; Possingham, Hugh P.; Martin, Tara G.

2011-01-01

Managed relocation is a controversial climate-adaptation strategy to combat negative climate change impacts on biodiversity. While the scientific community debates the merits of managed relocation1,2,3,4,5,6,7,8,9,10,11,12, species are already being moved to new areas predicted to be more suitable under climate change13,14. To inform these moves, we construct a quantitative decision framework to evaluate the timing of relocation in the face of climate change. We find that the optimal timing depends on many factors, including the size of the population, the demographic costs of translocation and the expected carrying capacities over time in the source and destination habitats. In some settings, such as when a small population would benefit from time to grow before risking translocation losses, haste is ill advised. We also find that active adaptive management15,16 is valuable when the effect of climate change on source habitat is uncertain, and leads to delayed movement.

The Consequences of State Intervention: Forced Relocations and Sámi Rights in Sweden, 1919–2012

Directory of Open Access Journals (Sweden)

Patrik Lantto

2014-08-01

Full Text Available From the late 19th century up until the post-war period, Swedish Sámi policy was dominated by an image of the Sámi as nomadic reindeer herders. As nomads, the Sámi connection to the land they used was generally considered weaker than that of the settled population, and forced relocations were part of the Sámi policy for several decades as a solution to international developments that affected reindeer husbandry. These relocations have had and still have an effect on reindeer husbandry in Sweden today. The article examines and analyses forced relocations of Sámi reindeer herders, and specifically the effects of these relocations on the situation in one Reindeer Herding District: Vapsten. Strong intra-Sámi conflicts in the district today have historical roots in the forced relocations to the area, and the article analyses these and the role of the state both in causing the conflicts as well as solving them.

Records About Japanese Americans Relocated During World War II

Data.gov (United States)

National Archives and Records Administration — This series contains personal descriptive data about Japanese Americans evacuated from the states of Washington, Oregon, and California to ten relocation centers...

Transferring Knowledge in the Relocation of Manufacturing Units

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik; Liangsiri, Jirapha

2010-01-01

ABSTRACT Purpose--The global spread of production makes companies relocating their manufacturing units frequently. Not only equipments, systems and facilities, need to be moved, but the transfer of operational knowledge and experience seem to be a major challenge. However, discussions on knowledge...... transfer are derived predominantly from a cognitive perspective and normally focus on the organizational level. Thus, from the perspective of operations management, this paper aims to explore how to transfer production know-how on the shop floor level when manufacturing units are relocated and the paper...... indicate which means can be used to support this intra-firm transfer process. Design/methodology/approach--Four cases are identified from two action research projects on the basis of observations over one-and-half years and semi-structured interviews with more than 59 people. Other methods, such as surveys...

76 FR 32340 - Federal Travel Regulation; Temporary Duty (TDY) Travel Allowances (Taxes); Relocation Allowances...

Science.gov (United States)

2011-06-06

... reflection of the actual tax impact on the employee. Therefore, this proposed rule offers the one-year RITA... to estimate the additional income tax liability that you incur as a result of relocation benefits and... Allowances (Taxes); Relocation Allowances (Taxes) AGENCY: Office of Governmentwide Policy (OGP), General...

47 CFR 101.82 - Reimbursement and relocation expenses in the 2110-2150 MHz and 2160-2200 MHz bands.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Reimbursement and relocation expenses in the... License Transfers, Modifications, Conditions and Forfeitures § 101.82 Reimbursement and relocation expenses in the 2110-2150 MHz and 2160-2200 MHz bands. (a) Reimbursement and relocation expenses for the...

Environmental Assessment for the vacuum process laboratory (VPL) relocation at the Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

1992-04-01

This Environmental Assessment (EA) evaluates the potential environmental impacts of relocating a vacuum process laboratory (VPL) from Building 321 to Building 2231 at Lawrence Livermore National Laboratory (LLNL). The VPL provides the latest technology in the field of vacuum deposition of coatings onto various substrates for several weapons-related and energy-related programs at LLNL. Operations within the VPL at LLNL will not be expanded nor reduced by the relocation. No significant environmental impacts are expected as a result of the relocation of the VPL

Microwave imaging

CERN Document Server

Pastorino, Matteo

2010-01-01

An introduction to the most relevant theoretical and algorithmic aspects of modern microwave imaging approaches Microwave imaging-a technique used in sensing a given scene by means of interrogating microwaves-has recently proven its usefulness in providing excellent diagnostic capabilities in several areas, including civil and industrial engineering, nondestructive testing and evaluation, geophysical prospecting, and biomedical engineering. Microwave Imaging offers comprehensive descriptions of the most important techniques so far proposed for short-range microwave imaging-in

On the dynamic of franchise (re)location in the North-American sport leagues

OpenAIRE

Narme, Thibaut

2013-01-01

As the cost of tax-dollar paid stadia rises and the talks of relocations in the main North-American pro leagues increase, a multi-field analysis on the different mechanisms that decides team relocation seems necessary. This paper reviews the different mechanisms participating team location and finally offer a new angle of analysis on the actual equilibrium and demonstrates its dynamic nature.

48 CFR 31.205-35 - Relocation costs.

Science.gov (United States)

2010-10-01

... employees retain ownership of a vacated home in the old location and rent at the new location. The rented... work location (for a period of 12 months or more) of an existing employee or upon recruitment of a new employee. The following types of relocation costs are allowable as noted, subject to the limitations in...

Work environment perceptions following relocation to open-plan offices: A twelve-month longitudinal study.

Science.gov (United States)

Bergström, Jessica; Miller, Michael; Horneij, Eva

2015-01-01

A workplace's design can have various positive or negative effects on the employees and since the 1970s the advantages and disadvantages of open-plan offices have been discussed. The aim of this study was to investigate perceived health, work environment and self-estimated productivity one month before and at three, six and twelve months after relocation from individual offices to an open-plan office environment. Employees from three departments within the same company group and who worked with relatively similar tasks and who were planned to be relocated from private offices to open-plan offices were invited to participate. Questionnaires comprising items from The Salutogenic Health Indicator Scale, The Work Experience Measurement Scale, the questionnaire by Brennan et al. about perceived performance and one question from the Work Ability Index were sent to participants one month before relocation (baseline) to open-plan offices and then at three, six and twelve months after relocation. At baseline, 82 questionnaires were sent out. The response rate was 85%. At the follow-ups 77-79 questionnaires were sent out and the response-rate was 70%-81%. At follow-ups, perceived health, job satisfaction and performance had generally deteriorated. The results of the study indicate that employees' perception of health, work environment and performance decreased during a 12 month period following relocation from individual offices to open-plan offices.

A tailored relocation stress intervention programme for family caregivers of patients transferred from a surgical intensive care unit to a general ward.

Science.gov (United States)

Lee, Seul; Oh, HyunSoo; Suh, YeonOk; Seo, WhaSook

2017-03-01

To develop and examine a relocation stress intervention programme tailored for the family caregivers of patients scheduled for transfer from a surgical intensive care unit to a general ward. Family relocation stress syndrome has been reported to be similar to that exhibited by patients, and investigators have emphasised that nurses should make special efforts to relieve family relocation stress to maximise positive contributions to the well-being of patients by family caregivers. A nonequivalent control group, nonsynchronised pretest-post-test design was adopted. The study subjects were 60 family caregivers of patients with neurosurgical or general surgical conditions in the surgical intensive care unit of a university hospital located in Incheon, South Korea. Relocation stress and family burden were evaluated at three times, that is before intervention, immediately after transfer and four to five days after transfer. This relocation stress intervention programme was developed for the family caregivers based on disease characteristics and relocation-related needs. In the experimental group, relocation stress levels significantly and continuously decreased after intervention, whereas in the control group, a slight nonsignificant trend was observed. Family burden levels in the control group increased significantly after transfer, whereas burden levels in the experimental group increased only marginally and nonsignificantly. No significant between-group differences in relocation stress or family burden levels were observed after intervention. Relocation stress levels of family caregivers were significantly decreased after intervention in the experimental group, which indicates that the devised family relocation stress intervention programme effectively alleviated family relocation stress. The devised intervention programme, which was tailored to disease characteristics and relocation-related needs, may enhance the practicality and efficacy of relocation stress

Using an ecological ethics framework to make decisions about the relocation of wildlife

Science.gov (United States)

McCoy, E.D.; Berry, K.

2008-01-01

Relocation is an increasingly prominent conservation tool for a variety of wildlife, but the technique also is controversial, even among conservation practitioners. An organized framework for addressing the moral dilemmas often accompanying conservation actions such as relocation has been lacking. Ecological ethics may provide such a framework and appears to be an important step forward in aiding ecological researchers and biodiversity managers to make difficult moral choices. A specific application of this framework can make the reasoning process more transparent and give more emphasis to the strong sentiments about non-human organisms held by many potential users. Providing an example of the application of the framework may also increase the appeal of the reasoning process to ecological researchers and biodiversity managers. Relocation as a conservation action can be accompanied by a variety of moral dilemmas that reflect the interconnection of values, ethical positions, and conservation decisions. A model that is designed to address moral dilemmas arising from relocation of humans provides/demonstrates/illustrates a possible way to apply the ecological ethics framework and to involve practicing conservationists in the overall decision-making process. ?? 2008 Springer Science+Business Media B.V.

Preliminary results of teleseismic double-difference relocation of earthquakes around Indonesian archipelago region

Energy Technology Data Exchange (ETDEWEB)

Nugraha, Andri Dian, E-mail: andridn104@gmail.com; Widiyantoro, Sri [Global Geophysical Research Group, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung (Indonesia); Shiddiqi, Hasbi Ash [Earth Sciences Graduate Program, Faculty of Earth Sciences and Technology, Institut Teknologi Bandung (Indonesia); Ramdhan, Mohamad; Wandono,; Sutiyono,; Handayani, Titi; Nugroho, Hendro [Agency for Meteorology, Climatology, and Geophysics (BMKG), Jakarta (Indonesia)

2015-04-24

Indonesian archipelago region is located in active tectonic setting and high seismicity zone. During the last decade, Indonesian was experienced with destructive major earthquakes causing damage and victims. The information of precise earthquake location parameters are very important in partular for earthquake early warning to the society and for advance seismic studies. In this study, we attempted to improve hypocenter location compiled by BMKG for time periods of April, 2009 up to June, 2014 for about 22,000 earthquake events around Indonesian region. For the firts time, we applied teleseismic double-difference relocation algorithm (teletomoDD) to improve hypocenter region in Indonesia region combining regional and teleseismic stations. Hypocenter relocation was performed utilizing local, regional, and teleseismic P-wave arrival time data. Our relocation result show that travel-time RMS errors were greatly reduced compared to the BMKG catalog. Seismicity at shallower depth (less than 50 km) shows significantly improvement especially in depth, and refined shallow geological structures, e.g. trench and major strike slip faults. Clustered seismicity is also detected beneath volcanic region, and probably related volcano activities and also major faults nearby. In the Sunda arc region, seismicity at shallower depth centered at two major distributions parallel to the trench strike direction, i.e. around fore-arc and in mainland that related to major fault, e.g. the Sumatran fault, and volcanic fronts. Below Central Java region, relocated hypocenter result showed double seismic zone pattern. A seismic gap is detected around the Sunda-Banda transition zone where transition between oceanic subduction to continental crust collision of Australian plate occurs. In Eastern Indonesia region, shallow earthquakes are observed related to major strike slip faults, e.g. Sorong and Palu-Koro fault, volcanism, and shallow part of subduction and collision zones. We also compare our

Hypocenter relocation along the Sunda arc in Indonesia, using a 3D seismic velocity model

Science.gov (United States)

Nugraha, Andri Dian; Shiddiqi, Hasbi A.; Widiyantoro, Sri; Thurber, Clifford H.; Pesicek, Jeremy D.; Zhang, Haijiang; Wiyono, Samsul H.; Ramadhan, Mohamad; Wandano,; Irsyam, Mahsyur

2018-01-01

The tectonics of the Sunda arc region is characterized by the junction of the Eurasian and Indo‐Australian tectonic plates, causing complex dynamics to take place. High‐seismicity rates in the Indonesian region occur due to the interaction between these tectonic plates. The availability of a denser network of seismometers after the earthquakes of Mw">Mw 9.1 in 2004 and  Mw">Mw 8.6 in 2005 supports various seismic studies, one of which regards the precise relocation of the hypocenters. In this study, hypocenter relocation was performed using a teleseismic double‐difference (DD) relocation method (teletomoDD) combining arrival times of P and S waves from stations at local, regional, and teleseismic distances. The catalog data were taken from the Agency of Meteorology, Climatology, and Geophysics (BMKG) of Indonesia, and the International Seismological Centre (ISC) for the time period of April 2009 to May 2015. The 3D seismic‐wave velocity model with a grid size 1°×1°">1°×1° was used in the travel‐time calculations. Relocation results show a reduction in travel‐time residuals compared with the initial locations. The relocation results better illuminate subducted slabs and active faults in the region such as the Mentawai back thrust and the outer rise in the subduction zone south of Java. Focal mechanisms from the Global Centroid Moment Tensor catalog are analyzed in conjunction with the relocation results, and our synthesis of the results provides further insight into seismogenesis in the region.

Perceptions of performance and satisfaction after relocation to an activity-based office.

Science.gov (United States)

Rolfö, Linda; Eklund, Jörgen; Jahncke, Helena

2018-05-01

Many companies move from open-plan offices (OPO) to activity-based workplaces (ABWs). However, few studies examine the benefits and drawbacks following such a change. The aim of this study was to explore how physical conditions, office use, communication, privacy, territoriality, satisfaction and perceived performance change following a company's relocation from an OPO to an ABW. A mixed methods approach included pre- and post-relocation questionnaires and post-relocation focus groups, individual interviews and observations. The questionnaires enabled comparisons over time (n = 34) and broader analyses based on retrospective ratings of perceived change (n = 66). Results showed that satisfaction with auditory privacy, background noise, air quality, outdoor view and aesthetics increased significantly after relocation. Negative outcomes, such as lack of communication within teams, were perceived as being due to the high people-to-workstation ratio and lack of rules. Overall satisfaction with the physical work environment increased in the ABW compared to the OPO. Perceived performance did not change significantly. Practitioner Summary: Activity-based workplaces (ABWs) are commonly implemented although their effects on performance and well-being are unclear. This case study gives advice to stakeholders involved in office planning. Despite shortcomings with the people-to-workstation ratio and rules, employees showed improved satisfaction with auditory privacy and aesthetics in the ABW compared with the previous open-plan office.

Effects of fuel relocation on reflood in a partially-blocked rod bundle

Energy Technology Data Exchange (ETDEWEB)

Kim, Byoung Jae [School of Mechanical Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134 (Korea, Republic of); Kim, Jongrok; Kim, Kihwan; Bae, Sung Won [Thermal-Hydraulic Safety Research Division, Korea Atomic Energy Research Division, 111 Daedeok-daero, Yuseong-gu, Daejeon 34057 (Korea, Republic of); Moon, Sang-Ki, E-mail: skmoon@kaeri.re.kr [Thermal-Hydraulic Safety Research Division, Korea Atomic Energy Research Division, 111 Daedeok-daero, Yuseong-gu, Daejeon 34057 (Korea, Republic of)

2017-02-15

Ballooning of the fuel rods has been an important issue, since it can influence the coolability of the rod bundle in a large-break loss-of-coolant accident (LBLOCA). Numerous past studies have investigated the effect of blockage geometry on the heat transfer in a partially blocked rod bundle. However, they did not consider the occurrence of fuel relocation and the corresponding effect on two-phase heat transfer. Some fragmented fuel particles located above the ballooned region may drop into the enlarged volume of the balloon. Accordingly, the fuel relocation brings in a local power increase in the ballooned region. The present study’s objective is to investigate the effect of the fuel relocation on the reflood under a LBLOCA condition. Toward this end, experiments were performed in a 5 × 5 partially-blocked rod bundle. Two power profiles were tested: one is a typical cosine shape and the other is the modified shape considering the effect of the fuel relocation. For a typical power shape, the peak temperature in the ballooned rods was lower than that in the intact rods. On the other hand, for the modified power shape, the peak temperature in the ballooned rods was higher than that in the intact rods. Numerical simulations were also performed using the MARS code. The tendencies of the peak clad temperatures were well predicted.

76 FR 48863 - Federal Travel Regulation (FTR); Relocation Allowances-Standard Mileage Rate for Moving Purposes

Science.gov (United States)

2011-08-09

... Travel Regulation (FTR); Relocation Allowances--Standard Mileage Rate for Moving Purposes AGENCY: Office... agencies will reimburse an employee for using a privately owned vehicle for relocation on a worldwide basis...), Office of Travel, Transportation and Asset Management (MT), General Services Administration at (202) 208...

41 CFR 302-3.507 - Once we authorize relocation expenses for new appointees or student trainees what expenses must...

Science.gov (United States)

2010-07-01

... relocation expenses for new appointees or student trainees what expenses must we pay? 302-3.507 Section 302-3.507 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES....507 Once we authorize relocation expenses for new appointees or student trainees what expenses must we...

Temperature Discontinuity Caused by Relocation of Meteorological Stations in Taiwan

Directory of Open Access Journals (Sweden)

Chih-wen Hung

2009-01-01

Full Text Available With global warming upon us, it has be come increasingly important to identify the extent of this warming trend and in doing so be able to rank mean temperature changes in particular seasons and years. This requires a need for homogeneous climate data, which do not reflect individual anomalies in instruments, station locations or local environments (urbanization. Ac curate homogeneous long-term meteorological data helps show how temperature variations have truly occurred in the climate. Many possible factors contribute to artificial abrupt changes or sharp discontinuities in long time series data, such as the impact of station relocation, changes in observational schedules and instrumentation. Homogeneity adjustments of in situ climate data are very important processes for preparing observational data to be used in further analysis and research. Users require a well-documented history of stations to make appropriate homogeneity adjustments because precise historical back ground records of stations can provide researchers with knowledge of when artificial discontinuity has occurred and its causes. With out such de tailed historical data for each meteorological station, abrupt changes are difficult to interpret. Unfortunately, no homogeneity adjustments for temperature records have been con ducted previously in Tai wan, and present available sources of the history of Taiwan's meteorological stations exhibit in consistencies. In this study, information pertaining to station history, especially relocation records, is pro vided. This information is essential for anal y sis of continuous time series data for temperature and climate warming studies. Temperature data from several stations is given in this study to show how artificial discontinuity occurs due to station relocation. Al though there is no homogeneous adjusted climate data provided in this preliminary work, the summarizing of information regarding station relocations should be of assistance

Heatup of the TMI-2 lower head during core relocation

International Nuclear Information System (INIS)

Wang, S.K.; Sienicki, J.J.; Spencer, B.W.

1989-01-01

An analysis has been carried out to assess the potential of a melting attack upon the reactor vessel lower head and incore instrument nozzle penetration weldments during the TMI core relocation event at 224 minutes. Calculations were performed to determine the potential for molten corium to undergo breakup into droplets which freeze and form a debris bed versus impinging upon the lower head as one or more coherent streams. The effects of thermal-hydraulic interactions between corium streams and water inside the lower plenum, the effects of the core support assembly structure upon the corium, and the consequences of corium relocation by way of the core former region were examined. 19 refs., 24 figs

76 FR 18325 - Federal Travel Regulation; FTR Cases 2007-304 and 2003-309, Relocation Allowances

Science.gov (United States)

2011-04-01

... envisions agencies using commercial off-the-shelf software, data warehousing systems, or tools built by the.... GSA agrees and changed the definition. Data Systems, Reporting, and Relocation Program Management The... single electronic environment. Also, GSA removed the due date for agencies to report relocation data from...

Microwave Ovens

Science.gov (United States)

... Products and Procedures Home, Business, and Entertainment Products Microwave Ovens Share Tweet Linkedin Pin it More sharing ... 1030.10 - Microwave Ovens Required Reports for the Microwave Oven Manufacturers or Industry Exemption from Certain Reporting ...

WAGES AND COMMUTING: QUASI-NATURAL EXPERIMENTS’ EVIDENCE FROM FIRMS THAT RELOCATE

DEFF Research Database (Denmark)

Mulalic, Ismir; N. Van Ommeren, Jos; Pilegaard, Ninette

2014-01-01

We examine individual-level compensating differentials for commuting distance in a quasi-natural experiment setting by examining how wages respond to changes in commuting distance induced by firm relocations. This set-up enables us to test for the relevance of job search frictions within labour...... market models. Due to the quasi-experimental set-up, we are able to avoid a range of endogeneity issues. We demonstrate that a 1 km increase in commuting distance induces an almost negligible wage increase in the year after the relocation but a more substantial wage increase of about 0.15% three years...

Wages and commuting: quasi-natural experiments' evidence from firms that relocate

DEFF Research Database (Denmark)

Mulalic, Ismir; N. Van Ommeren, Jos; Pilegaard, Ninette

2014-01-01

We examine individual-level compensating differentials for commuting distance in a quasi-natural experiment setting by examining how wages respond to changes in commuting distance induced by firm relocations. This set-up enables us to test for the relevance of job search frictions within labour...... market models. Due to the quasi-experimental set-up, we are able to avoid a range of endogeneity issues. We demonstrate that a 1 km increase in commuting distance induces an almost negligible wage increase in the year after the relocation but a more substantial wage increase of about 0.15% three years...

Optimization of hospital ward resources with patient relocation using Markov chain modeling

DEFF Research Database (Denmark)

Andersen, Anders Reenberg; Nielsen, Bo Friis; Reinhardt, Line Blander

2017-01-01

available to the hospital. Patient flow is modeled using a homogeneous continuous-time Markov chain and optimization is conducted using a local search heuristic. Our model accounts for patient relocation, which has not been done analytically in literature with similar scope. The study objective is to ensure...... are distributed. Furthermore, our heuristic is found to efficiently derive the optimal solution. Applying our model to the hospital case, we found that relocation of daily arrivals can be reduced by 11.7% by re-distributing beds that are already available to the hospital....

Residential relocation and change in social capital: A natural experiment from the 2011 Great East Japan Earthquake and Tsunami.

Science.gov (United States)

Hikichi, Hiroyuki; Sawada, Yasuyuki; Tsuboya, Toru; Aida, Jun; Kondo, Katsunori; Koyama, Shihoko; Kawachi, Ichiro

2017-07-01

Social connections in the community ("social capital") represent an important source of resilience in the aftermath of major disasters. However, little is known about how residential relocation due to housing destruction affects survivors' social capital. We examined changes in social capital among survivors of the 2011 Great East Japan Earthquake and Tsunami. People who lost their homes were resettled to new locations by two primary means: (i) group relocation to public temporary trailer housing or (ii) individual relocation, in which victims moved into government-provided housing by lottery or arranged for their own accommodation (market rental housing or private purchase/new construction). The baseline for our natural experiment was established 7 months before the 11 March 2011 disaster, when we conducted a survey of older community-dwelling adults who lived 80-km west of the earthquake epicenter. Approximately 2.5 years after the disaster, the follow-up survey gathered information about personal experiences of disaster as well as health status and social capital. Among 3421 people in our study, 79 people moved via group relocation to public temporary trailer housing, whereas 96 people moved on their own. The individual fixed-effects model showed that group relocation was associated with improved informal socializing and social participation (β coefficient = 0.053, 95% confidence interval: 0.011 to 0.095). In contrast, individual relocation was associated with declining informal socializing and social participation (β coefficient = -0.039, 95% confidence interval: -0.074 to -0.003). Group relocation, as compared to individual relocation, appeared to preserve social participation and informal socializing in the community.

Negotiating a Concurrence: Tracing the Visible/Invisible Relocation within Migrant-Inhabited Cities of China

Directory of Open Access Journals (Sweden)

Xueni Peng

2015-04-01

China’s internal migrants experience hardship akin to those undergone by overseas immigrants. In this respect, migration in China is an experience that begins before people move away from their place of origin and continues long after arriving in their new home destinations. As a unique feature of migration research, national relocation is not simply crossing a geographical boundary, but also transgressing social and psychological environment barriers. Our research intends to examine the underestimated or marginal character played by such outsider crowds with special regard given to the individual’s experience of ‘unfamiliar settlements. This involves exploring the role of migrants’ transformation through the misapprehension that relocation is merely a geographical movement. We suggest that visible relocation brings other incidental replacements (such as changes in identity, psychological cognition and social cohesion.

Microwave energy transmission

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, Hiroshi [Kyoto Univ. (Japan)

1989-03-05

Laying stress on the technological problems and effect on the environment of microwave energy transmission, recent scientific and engineering problems and related subjects are described. Because no fuel is required for the solar power generation, the power generation system can not be considered as an expensive one when the unit cost of energy is taken into consideration. Some of the important technological problems in the microwave energy transmission are accurate microwave beam control technology to receiving stations and improvement in the efficiency of transmission system. Microwave energy beam has effects on living bodies, communication, and plasma atmosphere of the earth. Microwave energy transmission using a space flyer unit is scheduled. Its objective is the development of microwave wireless transmission technology and the study of the correlation between high power microwave and ionosphere plasma. Experiments on such a small scale application as a microwave driven space ship to bring results seem also important. 12 refs., 13 figs.

Final hazard classification for N basin water filtration and sediment relocation operations

International Nuclear Information System (INIS)

Pisarcik, D.J.; Kretzschmar, S.P.

1996-02-01

This document provides an auditable safety analysis and hazard classification for the filtration of basin water and the relocation of 105-N basin solids to the North Cask Pit within the basin complex. This report assesses the operation of the Water Filtration System and the Remotely Operated Sediment Extraction Equipment (ROSEE). These activities have an activity hazard classification of radiological. Inventories of potentially releasable nonradioactive hazardous materials are far below the reportable quantities of 40 CFR 302. No controls are required to maintain the releasable inventories of these materials below the reportable quantities. Descriptive material is included to provide a general understanding of the water filtration and sediment relocation processes. All equipment will be operated as described in work instructions and/or applicable procedures. Special controls associated with these activities are as follows: (1) A leak inspection of the ROSEE system shall be performed at least once every 5-hour period of sediment relocation operation. (2) A berm must be in place around the North Cask Pit to redirect a potential abovewater ROSEE system leak back to the basin

Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies

Science.gov (United States)

Sun, Jing; Wang, Wenlong; Yue, Qinyan

2016-01-01

Microwave heating is rapidly emerging as an effective and efficient tool in various technological and scientific fields. A comprehensive understanding of the fundamentals of microwave–matter interactions is the precondition for better utilization of microwave technology. However, microwave heating is usually only known as dielectric heating, and the contribution of the magnetic field component of microwaves is often ignored, which, in fact, contributes greatly to microwave heating of some aqueous electrolyte solutions, magnetic dielectric materials and certain conductive powder materials, etc. This paper focuses on this point and presents a careful review of microwave heating mechanisms in a comprehensive manner. Moreover, in addition to the acknowledged conventional microwave heating mechanisms, the special interaction mechanisms between microwave and metal-based materials are attracting increasing interest for a variety of metallurgical, plasma and discharge applications, and therefore are reviewed particularly regarding the aspects of the reflection, heating and discharge effects. Finally, several distinct strategies to improve microwave energy utilization efficiencies are proposed and discussed with the aim of tackling the energy-efficiency-related issues arising from the application of microwave heating. This work can present a strategic guideline for the developed understanding and utilization of the microwave heating technology. PMID:28773355

Crisis Relocation Workshops for Transportation Industry Representatives

Science.gov (United States)

1979-12-01

executive, two National Guard members, one Air Force transporta- _a ,tion representative, two Red Cross representatives, one school bus z coordinators...manaaers, local transitCD operator, and miiltary busingA authorityA Local Governa-ient 2 Fire chief, assistantI Air Force 3 Liaison Support D CPA :z...to attend the workshop. Majur trans- portation problems anticipated during crisis relocation include: 1. Transportation of carless residents; 2. The

Relocation Stress, Coping, and Sense of Control among Resettlers Resulting from China's Three Gorges Dam Project

Science.gov (United States)

Xi, Juan; Hwang, Sean-Shong

2011-01-01

The involuntary relocation of people for development purposes has become prevalent across the world in recent decades. Depression is one of the documented negative outcomes of involuntary relocation among resettlers. Viewing the affected population simply as passive victims, past studies have largely ignored the coping strategies employed by…

41 CFR 302-1.2 - Who is not eligible for relocation expense allowances under this chapter?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false Who is not eligible for relocation expense allowances under this chapter? 302-1.2 Section 302-1.2 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 1-GENERAL RULES Applicability...

5 CFR 575.209 - Payment of relocation incentives.

Science.gov (United States)

2010-01-01

... pay periods equals 546 days, and 546 days divided by 365 days equals 1.50 years. (c)(1) An authorized... pay a relocation incentive— (1) As an initial lump-sum payment at the commencement of the service... employee in a service period may not exceed 25 percent of the annual rate of basic pay of the employee at...

Comparison tomography relocation hypocenter grid search and guided grid search method in Java island

International Nuclear Information System (INIS)

Nurdian, S. W.; Adu, N.; Palupi, I. R.; Raharjo, W.

2016-01-01

The main data in this research is earthquake data recorded from 1952 to 2012 with 9162 P wave and 2426 events are recorded by 30 stations located around Java island. Relocation hypocenter processed using grid search and guidded grid search method. Then the result of relocation hypocenter become input for tomography pseudo bending inversion process. It can be used to identification the velocity distribution in subsurface. The result of relocation hypocenter by grid search and guided grid search method after tomography process shown in locally and globally. In locally area grid search method result is better than guided grid search according to geological reseach area. But in globally area the result of guided grid search method is better for a broad area because the velocity variation is more diverse than the other one and in accordance with local geological research conditions. (paper)

Relocation consequences on an ophthalmology consultation service from an inpatient to outpatient facility

Directory of Open Access Journals (Sweden)

Singh JS

2015-10-01

Full Text Available Jorawer S Singh,1 Vincent M Imbrogno,2 Mary K Howard,3 Amandip S Cheema,3 Ausra D Selvadurai,4 Surbhi Bansal5 1Department of Ophthalmology, George Washington University, Washington, DC, 2Contemporary Ophthalmology of Erie, Erie, PA, 3Department of Ophthalmology, University at Buffalo, Buffalo, NY, 4OcuSight Eye Care Center, Rochester, NY, 5Department of Ophthalmology, Virginia Commonwealth University, Richmond, VA, USA Importance: This study shows that relocation of an academic ophthalmology residency program from an inpatient to an outpatient setting in western New York does not affect the consult volume but affects management patterns and follow-up rates.Objective: To investigate the effects on the ophthalmology consultation service of an academic program with relocation from a Regional Level-1 Trauma center to an outpatient facility.Design: Consultation notes from 3 years before and 3 years after the University at Buffalo’s (UB Department of Ophthalmology relocation from a Regional Level-1 Trauma center (Erie County Medical Center to an outpatient facility (Ross Eye Institute were obtained from hospital electronic medical records and analyzed.Setting: Hospitalized care and institutional practice.Participants: All inpatient or Emergency Room Ophthalmology consultation patients from the Department of Ophthalmology at UB from 2004 to 2010 (1,379 patients.Exposures: None, this was a retrospective chart review.Main outcome measures: Patient demographics, reason for consult, diagnoses, and ophthalmic procedures performed by the UB Department of Ophthalmology before and after its relocation.Results: Relocation to the outpatient facility did not affect consult volume (P=0.15. The number of consults focusing on ophthalmic conditions, as a percentage of the yearly total, rose 460% (P=0.0001, while systemic condition consults with ocular manifestations fell 83% (P=0.0001. Consults for ocular trauma decreased 65% (P=0.0034. Consults ending with a

(Re)creating community: Experiences of Older Women Forcibly Relocated During Apartheid.

Science.gov (United States)

Roos, Vera; Kolobe, Patricia Stockie; Keating, Norah

2014-01-01

This article explores sense of community with a group of older African women, who were forcibly relocated during apartheid. The situation of a marginalised group, with a history of disconnection from younger generations and from place, provides an opportunity to consider the relevance of community in later life. The research was conducted at a day centre for older people in the North West Province of South Africa, more than 50 years after forced relocations took place. Eleven older women (70 years and older) participated. Qualitative data were obtained through visual research methods and group discussions and were thematically analysed. Findings were that place and sense of belonging as well as elements of community were relevant. Participants reported limited connections to place in either childhood or current communities. Post relocation, a sense of belonging was expressed only in relation to a shared-interest community of peers that addressed their needs for safety, emotional support and instrumental care. Also, generational relations were strained, giving rise to a sense of loss of a community where both young and old were responsible for each other. Constrained resource communities have a profound impact on opportunities to create a sense of belonging. © 2013 The Authors. Journal of Community & Applied Social Psychology published by John Wiley & Sons Ltd.

Gender differences in the family-relatedness of relocation decisions

NARCIS (Netherlands)

Ullrich, J.; Pluut, Helen; Büttgen, M.

2015-01-01

Using a dyadic study design, the present study draws on research into the family-relatedness of work decisions to examine the impact of the spouse's characteristics on an employee's willingness to engage in job-related relocation. With a sample of 1234 employees, the results show that spousal

41 CFR 300-70.1 - What are the requirements for reporting payments for employee travel and relocation?

Science.gov (United States)

2010-07-01

... Contracts and Property Management Federal Travel Regulation System GENERAL AGENCY REQUIREMENTS 70-AGENCY REPORTING REQUIREMENTS Requirement To Report Agency Payments for Employee Travel and Relocation § 300-70.1 What are the requirements for reporting payments for employee travel and relocation? Agencies (as...

[Relocation of Espeletia grandiflora (Asteraceae) plants as a strategy for enrichment of disturbed paramo areas (PNN Chingaza, Colombia)].

Science.gov (United States)

Rojas-Zamora, Oscar; Insuasty-Torres, Jennyfer; de Cardenas, Camilo los Angeles; Ríos, Orlando Vargas

2013-03-01

Ecological restoration of the Andean paramos faces several ecological barriers mainly at the phase of dispersal and establishment of native species. With the aim to contribute to the enrichment of degraded areas, different strategies have to be developed to overcome those barriers. In this work we studied the response of individuals of Espeletia grandiflora (Asteraceae) to the relocation as a strategy for ecological restoration programs. We also evaluated the effect of size of relocated individuals on their survival and development. The work was carried out in an experimental plot at 3 424m altitude in the sector "Lagunas de Siecha" of Chingaza National Park, Colombia. We relocated 200 plants that belonged to three different size classes: 5, 10 and 15cm of initial height. The following variables were registered: survival, plant height, number of living leaves and stem diameter of each individual. We also evaluated the differences between individuals in survival and development. In terms of survival the most efficient size classes corresponded to 15cm high; the survival was 85% after two years. The relative growth rates for height and stem diameter decreases with the increase in size, but the absolute increase in height did not show significant differences between the three sizes tested. Since the stem diameter was found the strongest survival predictor after two years of relocation activities, we suggest its use as a criterion for selection of relocation individuals. The relocation of individuals of E. grandiflora had a positive side effect, carrying other species that may contribute to the enrichment and restoration of degraded areas. Among these, we found species of the genus Hypericum, as well as Arcytophyllum nitidum and Calamagrostis effusa, which should be evaluated in terms of survival and development for the subsequent implementation of the relocation strategy. In this study we verified the successful relocation of individuals of E. grandiflora as a

Fast microwave assisted pyrolysis of biomass using microwave absorbent.

Science.gov (United States)

Borges, Fernanda Cabral; Du, Zhenyi; Xie, Qinglong; Trierweiler, Jorge Otávio; Cheng, Yanling; Wan, Yiqin; Liu, Yuhuan; Zhu, Rongbi; Lin, Xiangyang; Chen, Paul; Ruan, Roger

2014-03-01

A novel concept of fast microwave assisted pyrolysis (fMAP) in the presence of microwave absorbents was presented and examined. Wood sawdust and corn stover were pyrolyzed by means of microwave heating and silicon carbide (SiC) as microwave absorbent. The bio-oil was characterized, and the effects of temperature, feedstock loading, particle sizes, and vacuum degree were analyzed. For wood sawdust, a temperature of 480°C, 50 grit SiC, with 2g/min of biomass feeding, were the optimal conditions, with a maximum bio-oil yield of 65 wt.%. For corn stover, temperatures ranging from 490°C to 560°C, biomass particle sizes from 0.9mm to 1.9mm, and vacuum degree lower than 100mmHg obtained a maximum bio-oil yield of 64 wt.%. This study shows that the use of microwave absorbents for fMAP is feasible and a promising technology to improve the practical values and commercial application outlook of microwave based pyrolysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Evolving Law of Disputed Relocation: constructing inner-city renewal practices in Shanghai, 1990-2005.

Science.gov (United States)

Shih, Mi

2010-01-01

The forceful pursuit of inner-city renewal in Shanghai since the early 1990s has to a great extent achieved spatial modernization, but at the same time it has given rise to increasing conflicts over residential relocation. Using law as a prism through which to examine the dialectic relationship between renewal practices and disputed relocation, this article argues that the series of unprecedented enactments in law that have taken place during this period have both paved the way for real estate market expansion and been a significant source of relocation disputes in Shanghai. Rather than viewing law as simply given and determinate, the article traces the regulatory regime's codification of property practices as a means of actively responding to the requirements of the real estate market. Under large-scale renewal practices, residents' legal rights of "return settlement" (huiban) in inner-city areas were largely denied in the early 1990s, before being effectively abolished by the adoption of monetary compensation for displacement in the 2000s. The evolving law on property practices has greatly shaped the process of disputed relocation while simultaneously posing a potential challenge to China's use of law for market-oriented development.

Social support, coping strategies and their correlations with older adults' relocation adjustments after natural disaster.

Science.gov (United States)

Chao, Shiau-Fang

2017-06-01

The present study examines the associations among social support, coping strategies and relocation adjustment outcomes, including community cohesion, residential satisfaction and depressive symptoms, for older persons in Taiwan displaced by Typhoon Morakot. This study enrolled 372 adults aged 60 years or older who were relocated to permanent houses after Typhoon Morakot destroyed their homes on 8 August 2009. A path analysis simultaneously examined the hypothesized links among social support, coping strategies and relocation adjustment outcomes. The relationships between coping strategies and relocation outcomes varied. Problem-focused and support-seeking coping were positively related to perceived community cohesion, whereas emotion-focused coping was associated with a high number of depressive symptoms. Social support was positively related to residential satisfaction. Additionally, social support was also indirectly related to increased community cohesion and residential satisfaction through its positive relationship with support-seeking and problem-focused coping. More interventions should be implemented to enhance support within informal networks and a sense of belonging to the new resident community, thereby promoting more active coping strategies, enhancing the effectiveness of coping efforts and maximizing positive adjustment outcomes. Geriatr Gerontol Int 2017; 17: 1006-1014. © 2016 Japan Geriatrics Society.

Design of a microwave calorimeter for the microwave tokamak experiment

International Nuclear Information System (INIS)

Marinak, M.

1988-01-01

The initial design of a microwave calorimeter for the Microwave Tokamak Experiment is presented. The design is optimized to measure the refraction and absorption of millimeter rf microwaves as they traverse the toroidal plasma of the Alcator C tokamak. Techniques utilized can be adapted for use in measuring high intensity pulsed output from a microwave device in an environment of ultra high vacuum, intense fields of ionizing and non-ionizing radiation and intense magnetic fields. 16 refs

Microwave power engineering applications

CERN Document Server

Okress, Ernest C

2013-01-01

Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ioni

Heat transfer between relocated materials and the RPV lower head

International Nuclear Information System (INIS)

Rempe, J.L.; Knudson, D.L.; Kohriyama, T.

2001-01-01

Questions about the coolability of a continuous mass of relocated corium were raised during the Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) Post-accident examinations indicate that nearly half of the material that relocated to the vessel lower head during the TMI-2 accident formed a cohesive or ''continuous'' layer. TMI-2 VIP results and other evidence suggest that conduction through this continuous layer of solidified corium materials was assisted by other cooling mechanisms. Because increased knowledge about in-vessel coolability of corium materials may assist reactor designers in demonstrating that their concepts are passively safe, there is international interest in this topic. However, data are needed to identify what cooling mechanism(s) occurred and to develop a validated model for predicting this cooling. Corium cooling models significantly impact predictions for subsequent accident progression, such as the estimated time and mode of vessel failure. Hence, improved cooling models will provide a much needed, missing component of severe accident analyses. This paper provides a critical review of research investigating the coolability of corium relocating to a water-filled lower head. Where possible, existing models and data for predicting cooling are quantitatively compared; and governing relationships are identified. Key phenomena that should be incorporated into models for predicting this heat transfer are discussed, and deficiencies in current models and available data for predicting cooling are noted. Recommendations for improving these models and for obtaining data to validate these models are also provided. (author)

Choice and necessity: relocations in the Arctic and South Pacific

Directory of Open Access Journals (Sweden)

Robin Bronen

2014-02-01

Full Text Available Relocation – whereby livelihoods, housing and public infrastructure are reconstructed in another location – may be the best adaptation response for communities whose current location becomes uninhabitable or is vulnerable to future climate-induced threats.

Final results of the XR2-1 BWR metallic melt relocation experiment

International Nuclear Information System (INIS)

Gauntt, R.O.; Humphries, L.L.

1997-08-01

This report documents the final results of the XR2-1 boiling water reactor (BWR) metallic melt relocation experiment, conducted at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission. The objective of this experiment was to investigate the material relocation processes and relocation pathways in a dry BWR core following a severe nuclear reactor accident such as an unrecovered station blackout accident. The imposed test conditions (initial thermal state and the melt generation rates) simulated the conditions for the postulated accident scenario and the prototypic design of the lower core test section (in composition and in geometry) ensured that thermal masses and physical flow barriers were modeled adequately. The experiment has shown that, under dry core conditions, the metallic core materials that melt and drain from the upper core regions can drain from the core region entirely without formation of robust coherent blockages in the lower core. Temporary blockages that suspended pools of molten metal later melted, allowing the metals to continue draining downward. The test facility and instrumentation are described in detail. The test progression and results are presented and compared to MERIS code analyses. 6 refs., 55 figs., 4 tabs

Advances in microwaves 8

CERN Document Server

Young, Leo

2013-01-01

Advances in Microwaves, Volume 8 covers the developments in the study of microwaves. The book discusses the circuit forms for microwave integrated circuits; the analysis of microstrip transmission lines; and the use of lumped elements in microwave integrated circuits. The text also describes the microwave properties of ferrimagnetic materials, as well as their interaction with electromagnetic waves propagating in bounded waveguiding structures. The integration techniques useful at high frequencies; material technology for microwave integrated circuits; specific requirements on technology for d

Relocation work of temporary thermocouples for measuring the vessel cooling system in the safety demonstration test

International Nuclear Information System (INIS)

Shimazaki, Yosuke; Shinohara, Masanori; Ono, Masato; Yanagi, Shunki; Tochio, Daisuke; Iigaki, Kazuhiko

2012-05-01

It is necessary to confirm that the temperature of water cooling panel of the vessel cooling system (VCS) is controlled under the allowable working temperature during the safety demonstration test because the water cooling panel temperature rises due to stop of cooling water circulation pumps. Therefore, several temporary thermocouples are relocated to the water cooling panel near the stabilizers of RPV and the side cooling panel outlet ring header of VCS in order to observe the temperature change of VCS. The relocated thermocouples can measure the temperature change with starting of the cooling water circulation pumps of VCS. So it is confirmed that the relocated thermocouples can observe the VCS temperature change in the safety demonstration test. (author)

41 CFR 302-2.6 - May I be reimbursed for relocation expenses if I relocate to a new official station that is less...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false May I be reimbursed for... duty station? 302-2.6 Section 302-2.6 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 2-EMPLOYEES ELIGIBILITY REQUIREMENTS General Rules § 302...

Unloaded shortening velocity of voluntarily and electrically activated human dorsiflexor muscles in vivo.

Directory of Open Access Journals (Sweden)

Kazushige Sasaki

Full Text Available We have previously shown that unloaded shortening velocity (V(0 of human plantar flexors can be determined in vivo, by applying the "slack test" to submaximal voluntary contractions (J Physiol 567:1047-1056, 2005. In the present study, to investigate the effect of motor unit recruitment pattern on V(0 of human muscle, we modified the slack test and applied this method to both voluntary and electrically elicited contractions of dorsiflexors. A series of quick releases (i.e., rapid ankle joint rotation driven by an electrical dynamometer was applied to voluntarily activated dorsiflexor muscles at three different contraction intensities (15, 50, and 85% of maximal voluntary contraction; MVC. The quick-release trials were also performed on electrically activated dorsiflexor muscles, in which three stimulus conditions were used: submaximal (equal to 15%MVC 50-Hz stimulation, supramaximal 50-Hz stimulation, and supramaximal 20-Hz stimulation. Modification of the slack test in vivo resulted in good reproducibility of V(0, with an intraclass correlation coefficient of 0.87 (95% confidence interval: 0.68-0.95. Regression analysis showed that V(0 of voluntarily activated dorsiflexor muscles significantly increased with increasing contraction intensity (R(2 = 0.52, P<0.001. By contrast, V(0 of electrically activated dorsiflexor muscles remained unchanged (R(2<0.001, P = 0.98 among three different stimulus conditions showing a large variation of tetanic torque. These results suggest that the recruitment pattern of motor units, which is quite different between voluntary and electrically elicited contractions, plays an important role in determining shortening velocity of human skeletal muscle in vivo.

Focusing patterns of seismicity with relocation and collapsing

Science.gov (United States)

Li, Ka Lok; Gudmundsson, Ólafur; Tryggvason, Ari; Bödvarsson, Reynir; Brandsdóttir, Bryndís

2016-07-01

Seismicity is generally concentrated on faults or in fault zones of varying, sometimes complex geometry. An earthquake catalog, compiled over time, contains useful information about this geometry, which can help understanding the tectonics of a region. Interpreting the geometrical distribution of events in a catalog is often complicated by the diffuseness of the earthquake locations. Here, we explore a number of strategies to reduce this diffuseness and hence simplify the seismicity pattern of an earthquake catalog. These strategies utilize information about event locations contained in their overall catalog distribution. They apply this distribution as an a priori constraint on relocations of the events, or as an attractor for each individual event in a collapsing scheme, and thereby focus the locations. The latter strategy is not a relocation strategy in a strict sense, although event foci are moved, because the movements are not driven by data misfit. Both strategies simplify the seismicity pattern of the catalog and may help to interpret it. A synthetic example and a real-data example from an aftershock sequence in south west Iceland are presented to demonstrate application of the strategies. Entropy is used to quantify their effect.

Microwave undulator

International Nuclear Information System (INIS)

Batchelor, K.

1986-03-01

The theory of a microwave undulator utilizing a plane rectangular waveguide operating in the TE/sub 10n/ mode and other higher order modes is presented. Based on this, a possible undulator configuration is analyzed, leading to the conclusion that the microwave undulator represents a viable option for undulator wavelength down to about 1 cm where peak voltage and available microwave power considerations limit effectiveness. 4 refs., 4 figs

Effects of Unit Design on Acute Care Nurses' Walking Distances, Energy Expenditure, and Job Satisfaction: A Pre-Post Relocation Study.

Science.gov (United States)

Copeland, Darcy; Chambers, Misty

2017-07-01

The purpose of this study was to determine what differences occurred in steps taken and energy expenditure among acute care nurses when their work environment moved from a hospital with centralized nurses' stations to a hospital with decentralized nurses' stations. Additional goals were to determine design features nurses perceived as contributing to or deterring from their work activities and what changes occurred in reported job satisfaction. Since design features can also affect patient outcomes, patient falls were monitored. The construction of a replacement facility for a 224-bed Level 1 trauma center provided the opportunity to compare the effects of centralized versus decentralized nurses' stations on nurses' experiences of their work environments. A pre-post quasi-experimental design was used. RN participants completed an open-ended questionnaire and recorded pedometer data at the end of each shift, working for 3-month pre-relocation and for 3-month post-relocation. Nine months passed between the move and post-relocation data collection. There were significant reductions in nurses' energy expenditure ( p job satisfaction was high and improved post-relocation, and patient falls decreased by 55%. Post-relocation, a number of the dissatisfiers associated with the physical environment were eliminated, and nurses identified more satisfiers (in general and related to the physical environment). Patients are safer post-relocation as indicated by a decrease in falls. This decrease is even more noteworthy when considering that the numbers of patient beds on each unit is higher post-relocation.

41 CFR 102-41.215 - Do we report to GSA all forfeited, voluntarily abandoned, or unclaimed drug paraphernalia not...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Do we report to GSA all forfeited, voluntarily abandoned, or unclaimed drug paraphernalia not required for official use? 102-41.215 Section 102-41.215 Public Contracts and Property Management Federal Property Management Regulations System...

Variable frequency microwave heating apparatus

Energy Technology Data Exchange (ETDEWEB)

Bible, D.W.; Lauf, R.J.; Johnson, A.C.; Thigpen, L.T.

1999-10-05

A variable frequency microwave heating apparatus (10) designed to allow modulation of the frequency of the microwaves introduced into a multi-mode microwave cavity (34) for testing or other selected applications. The variable frequency microwave heating apparatus (10) includes a microwave signal generator (12) and a high-power microwave amplifier (20) or a high-power microwave oscillator (14). A power supply (22) is provided for operation of the high-power microwave oscillator (14) or microwave amplifier (20). A directional coupler (24) is provided for detecting the direction and amplitude of signals incident upon and reflected from the microwave cavity (34). A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load (28).

Advanced microwave processing concepts

Energy Technology Data Exchange (ETDEWEB)

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L. [Oak Ridge National Laboratory, TN (United States)

1995-05-01

The purpose of this work is to explore the feasibility of several advanced microwave processing concepts to develop new energy-efficient materials and processes. The project includes two tasks: (1) commercialization of the variable-frequency microwave furnace; and (2) microwave curing of polymer composites. The variable frequency microwave furnace, whose initial conception and design was funded by the AIC Materials Program, will allow us, for the first time, to conduct microwave processing studies over a wide frequency range. This novel design uses a high-power traveling wave tube (TWT) originally developed for electronic warfare. By using this microwave source, one can not only select individual microwave frequencies for particular experiments, but also achieve uniform power densities over a large area by the superposition of many different frequencies. Microwave curing of thermoset resins will be studied because it hold the potential of in-situ curing of continuous-fiber composites for strong, lightweight components. Microwave heating can shorten curing times, provided issues of scaleup, uniformity, and thermal management can be adequately addressed.

Effect of housing relocation and neighborhood environment on adolescent mental and behavioral health.

Science.gov (United States)

Byck, Gayle R; Bolland, John; Dick, Danielle; Swann, Gregory; Henry, David; Mustanski, Brian

2015-11-01

This study examined whether relocating from a high-poverty neighborhood to a lower poverty neighborhood as part of a federal housing relocation program (HOPE VI; Housing Opportunities for People Everywhere) had effects on adolescent mental and behavioral health compared to adolescents consistently living in lower poverty neighborhoods. Sociodemographic, risk behavior, and neighborhood data were collected from 592 low-income, primarily African-American adolescents and their primary caregivers. Structured psychiatric interviews were conducted with adolescents. Prerelocation neighborhood, demographic, and risk behavior data were also included. Hierarchical Linear Modeling (HLM) was used to test associations between neighborhood variables and risk outcomes. HLM was used to test whether the effect of neighborhood relocation and neighborhood characteristics might explain differences in sexual risk taking, substance use, and mental health outcomes. Adolescents who relocated of HOPE VI neighborhoods (n = 158) fared worse than control group participants (n = 429) on most self-reported mental health outcomes. The addition of subjective neighborhood measures generally did not substantively change these results. Our findings suggest that moving from a high-poverty neighborhood to a somewhat lower poverty neighborhood is not associated with better mental health and risk behavior outcomes in adolescents. The continued effects of having grown up in a high-poverty neighborhood, the small improvements in their new neighborhoods, the comparatively short length of time they lived in their new neighborhood, and/or the stress of moving appears to worsen most of the mental health outcomes of HOPE VI compared to control group participants who consistently lived in the lower poverty neighborhoods. © 2015 Association for Child and Adolescent Mental Health.

Food Relocalization for Environmental Sustainability in Cumbria

Directory of Open Access Journals (Sweden)

Les Levidow

2011-04-01

Full Text Available In the past decade, many European farmers have adopted less-intensive production methods replacing external inputs with local resources and farmers’ skills. Some have developed closer relations with consumers, also known as short food-supply chains or agro-food relocalization. Through both these means, farmers can gain more of the value that they have added to food production, as well as greater incentives for more sustainable methods and/or quality products, thus linking environmental and economic sustainability. These systemic changes encounter difficulties indicating two generic needs—for state support measures, and for larger intermediaries to expand local markets. The UK rural county of Cumbria provides a case study for exploring those two needs. Cumbria farmers have developed greater proximity to consumers, as a means to gain their support for organic, territorially branded and/or simply ‘local’ food. This opportunity has been an incentive for practices which reduce transport distances, energy costs and other inputs. Regional authorities have provided various support measures for more closely linking producers with each other and with consumers, together developing a Cumbrian food culture. Going beyond the capacity of individual producers, farmer-led intermediaries have maintained distinctive product identities in larger markets including supermarket chains. Although Cumbria’s agro-food relocalization initiatives remain marginal, they counteract the 1990s trend towards delocalization, while also indicating potential for expansion elsewhere.

Relocation and Seismogenic Structure of the 1998 Zhangbei-Shangyi Earthquake Sequence

Science.gov (United States)

Yang, Z.

2002-05-01

An earthquake of magnitude 6.2 occurred in the Zhangbei-Shangyi region in the northern China on January 10, 1998. The earthquake was about 180km to the northwest of the Beijing City and was felt at Beijing. This earthquake is the largest event since the 1976 great Tangshan earthquake of magnitude 7.8 in the northern China. Historically seismicity in the Zhangbei-Shangyi region was very low. In the epicentral area no active fault constituting the seismogenic geological features capable of generating moderate earthquakes like this earthquake has been found before the earthquake. Nor surface faulting has been observed after the earthquake. Field geological investigation after the earthquake found two conjugate surface features trending NNE-NE and NNW-WNW. Because of the geometry of the seismic network the hypocentral distribution of the Zhangbei-Shangyi earthquake sequence given by routine location exhibited no any preferable orientation feature. In this study the Zhangbei-Shangyi earthquake and its aftershocks with magnitude equal or lager than 3.0 were relocated using both the master event relative relocation algorithm and the double-difference earthquake relocation algorithm (Waldhauser, 2000). Both algorithms gave consistent results within accuracy limits. The epicenter of the main shock was 41.15­aN and 114.46­aE, which was located 4km apart from the macro-epicenter of this event. The focal depth of the main shock was 15 km. The epicenters of aftershocks of this earthquake sequence distribute in a nearly vertical plane and its vicinity with orientation N20­aE. The results of relocation for the Zhangbei-Shangyi earthquake sequence clearly indicate that the seismogenic structure of this event is a N20­aE striking fault with right-lateral reverse slip, and that the occurrence of the Zhangbei-Shangyi earthquake is tectonically driven by the horizontal and oriented ENE compression stress, same as that of the stress field in northern China.

Practical microwave electron devices

CERN Document Server

Meurant, Gerard

2013-01-01

Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

Heat transfer between relocated materials and the RPV lower head

Energy Technology Data Exchange (ETDEWEB)

Rempe, J.L.; Knudson, D.L. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States); Kohriyama, T. [INSS, Fukui (Japan)

2001-07-01

Questions about the coolability of a continuous mass of relocated corium were raised during the Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) Post-accident examinations indicate that nearly half of the material that relocated to the vessel lower head during the TMI-2 accident formed a cohesive or ''continuous'' layer. TMI-2 VIP results and other evidence suggest that conduction through this continuous layer of solidified corium materials was assisted by other cooling mechanisms. Because increased knowledge about in-vessel coolability of corium materials may assist reactor designers in demonstrating that their concepts are passively safe, there is international interest in this topic. However, data are needed to identify what cooling mechanism(s) occurred and to develop a validated model for predicting this cooling. Corium cooling models significantly impact predictions for subsequent accident progression, such as the estimated time and mode of vessel failure. Hence, improved cooling models will provide a much needed, missing component of severe accident analyses. This paper provides a critical review of research investigating the coolability of corium relocating to a water-filled lower head. Where possible, existing models and data for predicting cooling are quantitatively compared; and governing relationships are identified. Key phenomena that should be incorporated into models for predicting this heat transfer are discussed, and deficiencies in current models and available data for predicting cooling are noted. Recommendations for improving these models and for obtaining data to validate these models are also provided. (author)

Subnuclear relocalization and silencing of a chromosomal region by an ectopic ribosomal DNA repeat

DEFF Research Database (Denmark)

Jakociunas, Tadas; Domange Jordö, Marie Elise; Mebarek, Mazhoura Aït

2013-01-01

Our research addresses the relationship between subnuclear localization and gene expression in fission yeast. We observed the relocalization of a heterochromatic region, the mating-type region, from its natural location at the spindle-pole body to the immediate vicinity of the nucleolus. Relocali......Our research addresses the relationship between subnuclear localization and gene expression in fission yeast. We observed the relocalization of a heterochromatic region, the mating-type region, from its natural location at the spindle-pole body to the immediate vicinity of the nucleolus...

Exploring the impact of residential relocation on modal shift in commute trips : Evidence from a quasi-longitudinal analysis

NARCIS (Netherlands)

Yang, M.; Wu, J.; Rasouli, S.; Cirillo, C.; Li, D.

2017-01-01

A growing number of studies have been devoted to the effects of residential relocation on travel behavior. However, most of these studies only focus on the direct effects of personal and system characteristics; while, residential relocation may trigger several interrelated changes in activity-travel

41 CFR 302-12.100 - What are “relocation services”?

Science.gov (United States)

2010-07-01

... marketing assistance, home finding assistance, and property management services. ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What are ârelocation servicesâ? 302-12.100 Section 302-12.100 Public Contracts and Property Management Federal Travel Regulation...

Microwave heating type evaporator

International Nuclear Information System (INIS)

Taura, Masazumi; Nishi, Akio; Morimoto, Takashi; Izumi, Jun; Tamura, Kazuo; Morooka, Akihiko.

1987-01-01

Purpose: To prevent evaporization stills against corrosion due to radioactive liquid wastes. Constitution: Microwaves are supplied from a microwave generator by way of a wave guide tube and through a microwave permeation window to the inside of an evaporatization still. A matching device is attached to the wave guide tube for transmitting the microwaves in order to match the impedance. When the microwaves are supplied to the inside of the evaporization still, radioactive liquid wastes supplied from a liquid feed port by way of a spray tower to the inside of the evaporization still is heated and evaporated by the induction heating of the microwaves. (Seki, T.)

The microwave market

International Nuclear Information System (INIS)

Bybokas, J.

1989-01-01

As superconductors move from the laboratory to the marketplace, it becomes more important for researchers and manufacturers to understand the markets for this technology. The large market for microwave systems represents a major opportunity for high-T c superconductors. Conductor losses are a primary design limitation in conventional microwave systems. The low losses of superconductors at microwave frequencies will allow component designers and system designers to improve their products in many ways. The most important market segments for microwave systems are outlined in this discussion

Microwave tokamak experiment (MTX) first year of operation and future plans

International Nuclear Information System (INIS)

Jackson, M.C.

1989-01-01

The Microwave Tokamak Experiment (MTX) at Lawrence Livermore National Laboratory (LLNL) began plasma operations in November 1988, and our main goal is the study of electron-cyclotron heating (ECH) in plasma discharges. The MTX tokamak was relocated from the Massachusetts Institute of Technology (MIT), and we have re-created plasma parameters that are similar to those generated while the tokamak was at MIT. After stable ohmic operation was achieved, single-pulse FEL heating experiments began. During this phase, the FEL operated at low power levels on the way to its ultimate goal of 2 GW and 140 GHz with a 30-ns pulse length. We have developed a number of new diagnostics to measure these fast FEL pulses and the resulting plasma effects. In this paper, we present results that show the correlation of MTX data with MIT data, some of the operational modifications and procedures used, results to date from preliminary tokamak operations with the FEL, and our near-term operational plans. 7 refs., 8 figs., 1 tab

Microwave generation and complex microwave responsivity measurements on small Dayem bridges

DEFF Research Database (Denmark)

Pedersen, Niels Falsig; Sørensen, O; Mygind, Jesper

1977-01-01

Measurements of the active properties of a Dayem micro-bridge at X-band frequencies is described. The bridge was mounted in a microwave cavity designed to match the bridge properly and the microwave output from the cavity was detected using a sensitive X-band spectrometer. Microwave power...

Microwave photonics

CERN Document Server

Lee, Chi H

2006-01-01

Wireless, optical, and electronic networks continue to converge, prompting heavy research into the interface between microwave electronics, ultrafast optics, and photonic technologies. New developments arrive nearly as fast as the photons under investigation, and their commercial impact depends on the ability to stay abreast of new findings, techniques, and technologies. Presenting a broad yet in-depth survey, Microwave Photonics examines the major advances that are affecting new applications in this rapidly expanding field.This book reviews important achievements made in microwave photonics o

Seismicity studies at Moluccas area based on the result of hypocenter relocation using HypoDD

Energy Technology Data Exchange (ETDEWEB)

Utama, Muhammad Reza July, E-mail: muhammad.reza@bmkg.go.id [Student of Geophysical Engineering Study Program, Institute of Technology Bandung (Indonesia); Indonesian Meteorological, Climatological and Geophysical Agency (MCGA), Jakarta (Indonesia); Nugraha, Andri Dian; Puspito, Nanang T. [Global Geophysical Research Group, Faculty of Mining and Petroleum Engineering, ITB (Indonesia)

2015-04-24

The precise hypocenter was determined location using double difference method around subduction zone in Moluccas area eastern part of Indonesia. The initial hypocenter location from MCGA data catalogue of 1,945 earthquake events. Basically the principle of double-difference algorithm assumes if the distance between two earthquake hypocenter distribution is very small compared to the distance between the station to the earthquake source, the ray path can be considered close to both earthquakes. The results show the initial earthquakes with a certain depth (fix depth 10 km) relocated and can be interpreted more reliable in term of seismicity and geological setting. The relocation of the intra slab earthquakes beneath Banda Arc are also clearly observed down to depth of about 400 km. The precise relocated hypocenter will give invaluable seismicity information for other seismological and tectonic studies especially for seismic hazard analysis in this region.

Microwave Irradiation

Indian Academy of Sciences (India)

Way to Eco-friendly, Green Chemistry. Rashmi ... The rapid heating of food in the kitchen using microwave ovens ... analysis; application to waste treatment; polymer technology; ... of microwave heating in organic synthesis since the first contri-.

The experience of relocation for specialist treatment for Indigenous women diagnosed with vulvar cancer in East Arnhem Land.

Science.gov (United States)

McGrath, Pam; Rawson, Nicole

2013-01-01

Vulvar cancer is a serious condition that requires a range of specialist treatments including surgery, chemotherapy, and radiation. In Australia, such treatments are only available in major metropolitan hospitals. Thus, women diagnosed with this condition in rural and remote areas must relocate to the metropolitan specialist centers for treatment. The focus of this article is on the experience of relocation for specialist care for Indigenous women diagnosed with vulvar cancer from East Arnhem Land, Northern Territory, Australia. The findings presented in this article explore a range of issues that affect the experience of relocation such as community concerns, cultural distress, loneliness, fear, worry, and physical concerns associated with the condition.

Conceptual design for relocation of the underground monitoring systems to ground surface

International Nuclear Information System (INIS)

Toya, Naruhisa; Ogawa, Ken; Iwatsuki, Teruki; Ohnuki, Kenji

2015-09-01

One of the major subjects of the ongoing geoscientific research program, the Mizunami Underground Research Laboratory (MIU) Project in the Tono area, central Japan, is accumulation of knowledge on a recovery of the geological environment during and after the facility closure. Then it is necessary to plan the observation system which can be use of after the backfill of research tunnels. The main purpose of this report is contribution to the detailed design for relocation of the underground monitoring systems to ground surface. We discussed the restriction and requirement for the underground monitoring systems which can be use of after the backfill. Furthermore, we made the conceptual design for relocation of the current underground monitoring systems to ground surface. (author)

Seismicity of the North of the Russian Plate: Relocation of Recent Earthquakese

Science.gov (United States)

Morozov, A. N.; Vaganova, N. V.; Asming, V. E.; Mikhailova, Ya. A.

2018-03-01

The hypocenters of the earthquakes recorded in the north of the Russian Plate from 1982 to 2013 are relocated. The relocation of the hypocenters is based on the common velocity section, common methodology, and the entire set of the initial data and bulletins available from the Russian and foreign seismic stations. The efficiency of the algorithm for calculating the hypocentral parameters and the velocity section is demonstrated by the example of two nonmilitary nuclear explosions in July 18, 1985 and September 6, 1988 in the northern part of the European Russia. For the first time, two earthquakes of July 19, 1982 and October 7, 2012, which have not been previously reported in the catalogs for the north of the Russian plate, are included in the seismic catalog.

78 FR 4134 - Notice of Intent To Prepare An Environmental Impact Statement (EIS) On the Proposal To Relocate...

Science.gov (United States)

2013-01-18

... Proposal To Relocate the 18th Aggressor Squadron From Eielson Air Force Base (EAFB), Alaska to Joint Base... Eielson AFB, AK AGENCY: Pacific Air Forces, United States Air Force, DOD. ACTION: Notice of Intent... Statement (EIS) considering a proposal to relocate the 18th Aggressor Squadron from Eielson AFB to Joint...

Environmental Assessment: Relocation and storage of TRIGA reg-sign reactor fuel, Hanford Site, Richland, Washington

International Nuclear Information System (INIS)

1995-08-01

In order to allow the shutdown of the Hanford 308 Building in the 300 Area, it is proposed to relocate fuel assemblies (101 irradiated, three unirradiated) from the Mark I TRIGA Reactor storage pool. The irradiated fuel assemblies would be stored in casks in the Interim Storage Area in the Hanford 400 Area; the three unirradiated ones would be transferred to another TRIGA reactor. The relocation is not expected to change the offsite exposure from all Hanford Site 300 and 400 Area operations

Technical committee meeting on material-coolant interactions and material movement and relocation in liquid metal fast reactors

International Nuclear Information System (INIS)

1994-01-01

The Technical Committee Meeting on Material-Coolant Interactions and Material Movement and Relocation in Liquid Metal Fast Reactors was sponsored by the International Working Group on Fast Reactors (IWGFR), International Atomic Energy Agency (IAEA) and hosted by PNC, on behalf of the Japanese government. A broad range of technical subjects was discussed in the TCM, covering entire aspects of material motion and interactions relevant to the safety of LMFRs. Recent achievement and current status in research and development in this area were presented including European out-of-pile test of molten material movement and relocation; molten material-sodium interaction; molten fuel-coolant interaction; core disruptive accidents; sodium boiling; post accident material relocation, heat removal and relevant experiments already performed or planned

Technical committee meeting on material-coolant interactions and material movement and relocation in liquid metal fast reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-07-01

The Technical Committee Meeting on Material-Coolant Interactions and Material Movement and Relocation in Liquid Metal Fast Reactors was sponsored by the International Working Group on Fast Reactors (IWGFR), International Atomic Energy Agency (IAEA) and hosted by PNC, on behalf of the Japanese government. A broad range of technical subjects was discussed in the TCM, covering entire aspects of material motion and interactions relevant to the safety of LMFRs. Recent achievement and current status in research and development in this area were presented including European out-of-pile test of molten material movement and relocation; molten material-sodium interaction; molten fuel-coolant interaction; core disruptive accidents; sodium boiling; post accident material relocation, heat removal and relevant experiments already performed or planned.

Review of Microwave Photonics Technique to Generate the Microwave Signal by Using Photonics Technology

Science.gov (United States)

Raghuwanshi, Sanjeev Kumar; Srivastav, Akash

2017-12-01

Microwave photonics system provides high bandwidth capabilities of fiber optic systems and also contains the ability to provide interconnect transmission properties, which are virtually independent of length. The low-loss wide bandwidth capability of optoelectronic systems makes them attractive for the transmission and processing of microwave signals, while the development of high-capacity optical communication systems has required the use of microwave techniques in optical transmitters and receivers. These two strands have led to the development of the research area of microwave photonics. So, we can considered microwave photonics as the field that studies the interaction between microwave and optical waves for applications such as communications, radars, sensors and instrumentations. In this paper we have thoroughly reviewed the microwave generation techniques by using photonics technology.

Structural Responses of a Stream Community to a Channel Relocation Using a Natural Channel Design Approach

Science.gov (United States)

Jack, J.; Word, D.; Daniel, W.; Pritchard, S.; Parola, A.; Vesely, B.

2005-05-01

Streams have been heavily impacted by historical and contemporary management practices. Restorations are seen as a way to enhance stream ecosystem integrity, but there are few restoration sites where pre- and post-restoration data are available to assess "success." In 2003, a channelized reach of Wilson Creek (Kentucky, USA) was relocated using a natural channel design approach. We compared the structural and functional responses of the stream pre- and post restoration/relocation at sites within Wilson and two reference streams. Despite the construction disturbance, water chemistry parameters such as nitrate and turbidity were nearly identical at sampling stations above and below the relocation for 2003-2004. Macroinvertebrate colonization of the relocation sites was rapid, with communities dominated by Cheumatopsyche, Perlesta and Baetis. Assessments of CPOM transport indicated that the new stream channel is more retentive of leaf and woody debris material than the pre-restoration Wilson sites or unrestored reference stream sites. The restoration of suitable habitat and the presence of "source populations" for colonization may compensate for even large-scale (but short-term) construction disturbance. More research is needed to assess the balance between the disturbance impacts of restoration installation and the long term benefits of stream ecological improvement.

Dietary Intake and Cardiovascular Risk Factors in Icelanders Following Voluntarily a Low Carbohydrate Diet.

Directory of Open Access Journals (Sweden)

Anita S Elidottir

Full Text Available Most studies regarding low-carbohydrate diets (LCDs have been intervention studies. The aim of the current study was to investigate dietary intake and cardiovascular risk factors among individuals who voluntarily follow a LCD.A cross-sectional study was conducted (N = 54, 20-66yrs in Reykjavik, Iceland. Participants recorded food intake for three days. Blood samples were analyzed for cardiovascular risk factors.Nearly half of the participants were obese and around 60% had been on a LCD for ≥ 6 months. Fifty percent claimed they had lost weight during the past month. The median intake of carbohydrate, protein and fat were 8%, 22% and 68% E (hereof 25% saturated fatty acids, respectively. The consumption of bread and wholegrain cereals was very low (<5g/day, including the intake of dietary fiber (11g/day. Median fruit intake was 12 g/day. Intake of red meat and meat products was double that of the general population or ~900 g/week. Median intake of vitamins and minerals were mostly higher than the estimated average requirements. Cardiovascular risk factors were mostly within normal range. Mean blood lipids were slightly elevated although the high density lipoprotein/total cholesterol ratio was normal.Despite poor diet quality and high prevalence of obesity, individuals who voluntarily follow a LCD have cardiovascular risk factors mostly within reference range. These individuals consume very low amounts of carbohydrates and high amounts of fat and saturated fat acids. Intake of red meat and processed meat exceeds recommended intake. Very low intake of whole grain cereals and fruits results in low intake of fiber. Long term health implications need to be examined further in longitudinal studies.

Business or Pleasure? Blurring Relocation Categories and Motivation Patterns among Expatriates

DEFF Research Database (Denmark)

Lauring, Jakob; Selmer, Jan; Kristian S. Jacobsen, Jens

2014-01-01

and relations between leisure tourism and international work relocations. The study uniquely examines demographic differences in tourism and work motivation of academics temporarily residing abroad. Data was collected from 428 self-initiated expatriate academics from 60 countries temporarily working at 34...

Mechanism analysis on nuclear technical relocation of the major countries

International Nuclear Information System (INIS)

1985-12-01

This report is about cooperation method of nuclear energy among the USA, France and Canada. So it deals with building a cooperative system on nuclear technical relocation, researching a foreign policy on nuclear energy of the USA and cooperation method and cooperation trend of Japan, Canada, Russia, China and West Germany.

Microwave heating denitration device

International Nuclear Information System (INIS)

Sato, Hajime; Morisue, Tetsuo.

1984-01-01

Purpose: To suppress energy consumption due to a reflection of microwaves. Constitution: Microwaves are irradiated to the nitrate solution containing nuclear fuel materials, to cause denitrating reaction under heating and obtain oxides of the nuclear fuel materials. A microwave heating and evaporation can for reserving the nitrate solution is disposed slantwise relative to the horizontal plane and a microwave heating device is connected to the evaporation can, and inert gases for agitation are supplied to the solution within the can. Since the evaporation can is slanted, wasteful energy consumption due to the reflection of the microwaves can be suppressed. (Moriyama, K.)

Plasma relativistic microwave electronics

International Nuclear Information System (INIS)

Kuzelev, M.V.; Loza, O.T.; Rukhadze, A.A.; Strelkov, P.S.; Shkvarunets, A.G.

2001-01-01

One formulated the principles of plasma relativistic microwave electronics based on the induced Cherenkov radiation of electromagnetic waves at interaction of a relativistic electron beam with plasma. One developed the theory of plasma relativistic generators and accelerators of microwave radiation, designed and studied the prototypes of such devices. One studied theoretically the mechanisms of radiation, calculated the efficiencies and the frequency spectra of plasma relativistic microwave generators and accelerators. The theory findings are proved by the experiment: intensity of the designed sources of microwave radiation is equal to 500 μW, the frequency of microwave radiation is increased by 7 times (from 4 up to 28 GHz), the width of radiation frequency band may vary from several up to 100%. The designed sources of microwave radiation are no else compared in the electronics [ru

41 CFR 302-12.9 - What are the income tax consequences if I use a relocation services company?

Science.gov (United States)

2010-07-01

... the income tax consequences if I use a relocation services company? You may incur income taxes on... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What are the income tax consequences if I use a relocation services company? 302-12.9 Section 302-12.9 Public Contracts and Property...

Microwave engineering concepts and fundamentals

CERN Document Server

Khan, Ahmad Shahid

2014-01-01

Detailing the active and passive aspects of microwaves, Microwave Engineering: Concepts and Fundamentals covers everything from wave propagation to reflection and refraction, guided waves, and transmission lines, providing a comprehensive understanding of the underlying principles at the core of microwave engineering. This encyclopedic text not only encompasses nearly all facets of microwave engineering, but also gives all topics—including microwave generation, measurement, and processing—equal emphasis. Packed with illustrations to aid in comprehension, the book: •Describes the mathematical theory of waveguides and ferrite devices, devoting an entire chapter to the Smith chart and its applications •Discusses different types of microwave components, antennas, tubes, transistors, diodes, and parametric devices •Examines various attributes of cavity resonators, semiconductor and RF/microwave devices, and microwave integrated circuits •Addresses scattering parameters and their properties, as well a...

75 FR 24740 - Recovery Fact Sheet RP9580.102, Permanent Relocation

Science.gov (United States)

2010-05-05

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2010-0028] Recovery Fact Sheet RP9580.102, Permanent Relocation AGENCY: Federal Emergency Management Agency, DHS... Management Agency (FEMA). DATES: This fact sheet is effective April 14, 2010. ADDRESSES: This final fact...

The effect of ewes relocation on milk composition and milk flow kinetics

Directory of Open Access Journals (Sweden)

Lucia Jackuliaková

2014-02-01

Full Text Available The investigation of an influence of ewes relocation and milking in other parlour (treatment on milk flow kinetics, milkability and milk composition was the aim of this study. In total 34 ewes of two breeds and crosbreeds Tsigai (14 heads and Improved Valachian (20 heads with Lacaune were tested. Two weeks after lamb weaning the ewes were milked in parallel milking parlour (1x16 stalls under shelter. On the last evening milking (first experimental milking, EB before relocation of flock to another parlour, and during next three continuous evening milkings (E0 - second, E1 - third and E2 - fourth milking of exp. after relocation the milk flow kinetics were measured using electronic collection jar. On day E0 after morning milking the flock was moved on a pasture and milked in other parlour (1x24-stalls. During E0 we recorded a significant decrease of total milk yield in comparison with EB (0.527 ±0.04 and 0.647 ±0.04 L. Significant differences were also recorded in machine milk yield, machine stripping, milking time and in maximum milk flow rate. During E0 there was a higher number of nonbimodal and lower numbers of bimodal flow types. The response of ewe to E0 depended on its response to EB. Ewes with bimodal flow at EB responded more negatively to E0 than ewes with nonbimodal or plateau flow. During E2 there were significantly increased protein content and solids not fat in milk. Thus the treatment significantly influenced the milkability of ewes in a negative way, but more clear response was found out in ewes with bimodal flow response to machine milking before treatment. We could assume that relocation to other milking conditions caused only short-term changes in milk flow kinetic and milk yield. Normal 0 21 false false false SK X-NONE X-NONE

Microwave Measurements

CERN Document Server

Skinner, A D

2007-01-01

The IET has organised training courses on microwave measurements since 1983, at which experts have lectured on modern developments. Their lecture notes were first published in book form in 1985 and then again in 1989, and they have proved popular for many years with a readership beyond those who attended the courses. The purpose of this third edition of the lecture notes is to bring the latest techniques in microwave measurements to this wider audience. The book begins with a survey of the theory of current microwave circuits and continues with a description of the techniques for the measureme

Proceedings of microwave processing of materials 3

International Nuclear Information System (INIS)

Beatty, R.L.

1992-01-01

This book contains proceedings of the third MRS Symposium on Microwave Processing of Materials. Topics covered include: Microwave Processing Overviews, Numerical Modeling Techniques, Microwave Processing System Design, Microwave/Plasma Processing, Microwave/Materials Interactions, Microwave Processing of Ceramics, Microwave Processing of Polymers, Microwave Processing of Hazardous Wastes, Microwave NDE Techniques and Dielectric Properties and Measurements

The microwave effects on the properties of alumina at high frequencies of microwave sintering

International Nuclear Information System (INIS)

Sudiana, I. Nyoman; Ngkoimani, La Ode; Usman, Ida; Mitsudo, Seitaro; Sako, Katsuhide; Inagaki, Shunsuke; Aripin, H.

2016-01-01

Microwave sintering of materials has attracted much research interest because of its significant advantages (e.g. reduced sintering temperatures and soaking times) over the conventional heating. Most researchers compared processes that occurred during the microwave and conventional heating at the same temperature and time. The enhancements found in the former method are indicated as a 'non-thermal effect' which is usually used for explaining the phenomena in microwave processing. Numerous recent studies have been focused on the effect to elucidate the microwave interaction mechanism with materials. Moreover, recent progress on microwave sources such as gyrotrons has opened the possibility for processing materials by using a higher microwave frequency. Therefore, the technology is expected to exhibit a stronger non-thermal effect. This paper presents results from a series of experiments to study the non-thermal effect on microwave sintered alumina. Sintering by using a wide rage of microwave frequencies up to 300 GHz as well as a conventional furnace was carried out. The linear shrinkages of samples for each sintering method were measured. Pores and grains taken from scanning electron microstructure (SEM) images of cut surfaces were also examined. The results of a comparative study of the shrinkages and microstructure evolutions of the sintered samples under annealing in microwave heating systems and in an electric furnace were analyzed. A notably different behavior of the shrinkages and microstructures of alumina after being annealed was found. The results suggested that microwave radiations provided an additional force for mass transports. The results also indicated that the sintering process depended on microwave frequencies.

The microwave effects on the properties of alumina at high frequencies of microwave sintering

Energy Technology Data Exchange (ETDEWEB)

Sudiana, I. Nyoman, E-mail: sudiana75@yahoo.com; Ngkoimani, La Ode; Usman, Ida [Department of Physics, Faculty of Mathematic and Natural Science, Halu Oleo University, Kampus Bumi Tridharma Anduonohu, Kendari 93232 (Indonesia); Mitsudo, Seitaro; Sako, Katsuhide; Inagaki, Shunsuke [Research Center for Development of Far-Infrared Region, University of Fukui, 3-9-1 Bunkyo, Fukui-shi 910-8507 (Japan); Aripin, H. [Center for Material Processing and Renewable Energy, Faculty of Learning Teacher and Education Science, Siliwangi University, Jl. Siliwangi 24 Tasikmalaya 46115, West Java (Indonesia)

2016-03-11

Microwave sintering of materials has attracted much research interest because of its significant advantages (e.g. reduced sintering temperatures and soaking times) over the conventional heating. Most researchers compared processes that occurred during the microwave and conventional heating at the same temperature and time. The enhancements found in the former method are indicated as a 'non-thermal effect' which is usually used for explaining the phenomena in microwave processing. Numerous recent studies have been focused on the effect to elucidate the microwave interaction mechanism with materials. Moreover, recent progress on microwave sources such as gyrotrons has opened the possibility for processing materials by using a higher microwave frequency. Therefore, the technology is expected to exhibit a stronger non-thermal effect. This paper presents results from a series of experiments to study the non-thermal effect on microwave sintered alumina. Sintering by using a wide rage of microwave frequencies up to 300 GHz as well as a conventional furnace was carried out. The linear shrinkages of samples for each sintering method were measured. Pores and grains taken from scanning electron microstructure (SEM) images of cut surfaces were also examined. The results of a comparative study of the shrinkages and microstructure evolutions of the sintered samples under annealing in microwave heating systems and in an electric furnace were analyzed. A notably different behavior of the shrinkages and microstructures of alumina after being annealed was found. The results suggested that microwave radiations provided an additional force for mass transports. The results also indicated that the sintering process depended on microwave frequencies.

Microwave-assisted Chemical Transformations

Science.gov (United States)

In recent years, there has been a considerable interest in developing sustainable chemistries utilizing green chemistry principles. Since the first published report in 1986 by Gedye and Giguere on microwave assisted synthesis in household microwave ovens, the use of microwaves as...

Survival of the relocated population of the U. S. after a nuclear attack. Final report

Energy Technology Data Exchange (ETDEWEB)

Haaland, C.M.; Chester, C.V.; Wigner, E.P.

1976-06-01

The feasibility of continued survival after a hypothetical nuclear attack is evaluated for people relocated from high-risk areas during the crisis period before the attack. The attack consists of 6559 MT, of which 5951 MT are ground bursts on military, industrial, and urban targets. Relocated people are assumed to be adequately protected from fallout radiation by shelters of various kinds. The major problems in the postattack situation will be the control of exposure to fallout radiation, and prevention of severe food shortages to several tens of millions of people.

Wages and commuting: quasi-natural experiments' evidence from firms that relocate

NARCIS (Netherlands)

Mulalic, I.; van Ommeren, J.N.; Pilegaard, N.

2014-01-01

We examine individual-level compensating differentials for commuting distance in a quasi-natural experiment setting by examining how wages respond to changes in commuting distance induced by firm relocations. This set-up enables us to test for the relevance of job search frictions within labour

Cosmic Microwave Background Timeline

Science.gov (United States)

Cosmic Microwave Background Timeline 1934 : Richard Tolman shows that blackbody radiation in an will have a blackbody cosmic microwave background with temperature about 5 K 1955: Tigran Shmaonov anisotropy in the cosmic microwave background, this strongly supports the big bang model with gravitational

Data forwarding mechanism for supporting real-time services during relocations in UMTS systems

Science.gov (United States)

Cai, Wei; Liao, Xianglong; Zheng, Liang; Liu, Zehong

2004-04-01

To minimize the interruption during the handovers or relocations invoked by subscribers moving is a very critical factor to enhance the performance of the UMTS systems. We know that the 2G systems have been optimized to minimize the interruption of speech during handovers by two main technologies: one is the bi-casting for the DL traffic and the other is the fast radio resynchronization by the UE for the UL traffic. In the UMTS systems, we have also implemented lossless relocations for non real-time services with high reliability by data buffering in the source RNC and target RNC for the UE. However, the UMTS systems support four QoS classes traffic flow: conversational class, streaming class, interactive class and background class. The main distinguishing factor between these QoS classes is how delay sensitive the traffic is: Conversational and Streaming classes are mainly used to carry real-time traffic flows, like video telephony, interactive and background classes are mainly used by traditional Internet applications like WWW, E-mail and FTP. It"s essential to provide the solutions for supporting real-time services to meet the requirement for QoS in UMTS systems. Apparently, the Data buffering mechanism is not adapted to real-time services because of it"s delay may exceed the basic requirement for real-time services. Under this background, the paper discussed two data forwarding solutions for real-time services from the PS domain in the UMTS systems: packet duplication and Core Network bi-casting. The former mechanism does not require any new procedures, messages nor information elements. The later mechanism requires that the GGSN or SGSN is able to bi-cast the DL traffic to the target RNC according to the relocations involving two SGSNs or just involving one SGSN. It also implicitly shows that we need change procedures at the nodes SGSN, GGSN and RNC which are involved in the relocation procedure based on existing procedures that we have already designed if

Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

Science.gov (United States)

Kumaran, S. Chidambara; Shunmugam, M. S.

2017-10-01

Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

Effects of black bear relocation on elk calf recruitment at Great Smoky Mountains National Park

Science.gov (United States)

Yarkovich, J.; Clark, J.D.; Murrow, J.L.

2011-01-01

Previous research from 2001 to 2006 on an experimentally released elk (Cervus elaphus) population at Great Smoky Mountains National Park (GSMNP or Park) indicated that calf recruitment (i.e., calves reaching 1 yr of age per adult female elk) was low (0.306, total SE = 0.090) resulting in low or negative population growth (λ = 0.996, 95% CI = 0.945–1.047). Black bear (Ursus americanus) predation was the primary calf mortality factor. From 2006 to 2008, we trapped and relocated 49 bears (30 of which were radiocollared) from the primary calving areas in the Park and radiomonitored 67 (28 M:39 F) adult elk and 42 calves to compare vital rates and population growth with the earlier study. A model with annual calf recruitment rate correlating with the number of bears relocated each year was supported (ΔAICc = 0.000; β = 0.070, 95% CI = 0.028–0.112) and a model with annual calf recruitment differing from before to during bear relocation revealed an increase to 0.544 (total SE = 0.098; β = −1.092, 95% CI = −1.180 to −0.375). Using vital rates and estimates of process standard errors observed during our study, 25-yr simulations maintained a mean positive growth rate in 100% of the stochastic trials with λ averaging 1.118 (95% CI = 1.096–1.140), an increase compared with rates before bear relocation. A life table response experiment revealed that increases in population growth were mostly (67.1%) due to changes in calf recruitment. We speculate that behavioral adaptation of the elk since release also contributed to the observed increases in recruitment and population growth. Our results suggest that managers interested in elk reintroduction within bear range should consider bear relocation as a temporary means of increasing calf recruitment.

Advances in microwaves 7

CERN Document Server

Young, Leo

2013-01-01

Advances in Microwaves, Volume 7 covers the developments in the study of microwaves. The book discusses the effect of surface roughness on the propagation of the TEM mode, as well as the voltage breakdown of microwave antennas. The text also describes the theory and design considerations of single slotted-waveguide linear arrays and the techniques and theories that led to the achievement of wide bandwidths and ultralow noise temperatures for communication applications. The book will prove invaluable to microwave engineers.

Land Acquisition and Relocation Assistance for Airport Improvement Program (AIP) Assisted Projects

Science.gov (United States)

2017-07-10

This advisory circular (AC) provides guidance to sponsors of airport projects developed under the Airport Improvement Program (AIP) to meet the requirements of the Uniform Relocation Assistance and Real Property Acquisition Policies Act of 1970 (Pl 9...

Microwave processing heats up

Science.gov (United States)

Microwaves are a common appliance in many households. In the United States microwave heating is the third most popular domestic heating method food foods. Microwave heating is also a commercial food processing technology that has been applied for cooking, drying, and tempering foods. It's use in ...

The European Microwave Week 2008 and its Microwave Conferences

NARCIS (Netherlands)

Hoogeboom, P.; Van Vliet, F.

2009-01-01

Under the auspices of the European Microwave Association (EuMA) the 11th annual European Microwave Week was organized in the Amsterdam RAI Congress Centre, The Netherlands, 27-31 October 2008. This major event consisted this year of five conferences, an exhibition, and various side events. The 38th

Environmental Perceptions and Health before and after Relocation to a Green Building.

Science.gov (United States)

MacNaughton, Piers; Spengler, John; Vallarino, Jose; Santanam, Suresh; Satish, Usha; Allen, Joseph

2016-08-01

Green buildings are designed to have low environmental impacts and improved occupant health and well-being. Improvements to the built environment including ventilation, lighting, and materials have resulted in improved indoor environmental quality (IEQ) in green buildings, but the evidence around occupant health is currently centered around environmental perceptions and self-reported health. To investigate the objective impact of green buildings on health, we tracked IEQ, self-reported health, and heart rate in 30 participants from green and conventional buildings for two weeks. 24 participants were then selected to be relocated to the Syracuse Center of Excellence, a LEED platinum building, for six workdays. While they were there, ventilation, CO 2 , and volatile organic compound (VOC) levels were changed on different days to match the IEQ of conventional, green, and green+ (green with increased ventilation) buildings. Participants reported improved air quality, odors, thermal comfort, ergonomics, noise and lighting and fewer health symptoms in green buildings prior to relocation. After relocation, participants consistently reported fewer symptoms during the green building conditions compared to the conventional one, yet symptom counts were more closely associated with environmental perceptions than with measured IEQ. On average, participants had 4.7 times the odds of reporting a lack of air movement, 1.4 more symptoms (p-value = 0.019) and a 2 bpm higher heart rate (p-value green and conventional buildings is driven by both environmental perceptions and physiological pathways.

Advances in microwaves 3

CERN Document Server

Young, Leo

2013-01-01

Advances in Microwaves, Volume 3 covers the advances and applications of microwave signal transmission and Gunn devices. This volume contains six chapters and begins with descriptions of ground-station antennas for space communications. The succeeding chapters deal with beam waveguides, which offer interesting possibilities for transmitting microwave energy, as well as with parallel or tubular beams from antenna apertures. A chapter discusses the electron transfer mechanism and the velocity-field characteristics, with a particular emphasis on the microwave properties of Gunn oscillators. The l

The adenovirus E4 11 k protein binds and relocalizes the cytoplasmic P-body component Ddx6 to aggresomes

International Nuclear Information System (INIS)

Greer, Amy E.; Hearing, Patrick; Ketner, Gary

2011-01-01

The adenovirus E4 11 k protein, product of E4 ORF3, is required in infection for processes including normal accumulation of viral late mRNAs. 11 k restructures both the nucleus and cytoplasm of infected cells by relocalizing specific host cell target proteins, most strikingly components of nuclear PML oncogenic domains. It is likely that in many cases relocalization inactivates target proteins to produce 11 k's effects, although the mechanism and targets for stimulation of late mRNA accumulation is unknown. We have identified a new set of proteins relocalized by 11 k: at least five protein components of cytoplasmic mRNA processing bodies (p-bodies) are found in 11 k-induced cytoplasmic aggresomes, sites where proteins are inactivated or destroyed. One of these p-body proteins, RNA helicase Ddx6, binds 11 k, suggesting a mechanism for relocalization. Because p-bodies are sites for mRNA degradation, their modification by 11 k may provide an explanation for the role of 11 k in viral late mRNA accumulation.

Microwave heating processes involving carbon materials

Energy Technology Data Exchange (ETDEWEB)

Menendez, J.A.; Arenillas, A.; Fidalgo, B.; Fernandez, Y.; Zubizarreta, L.; Calvo, E.G.; Bermudez, J.M. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain)

2010-01-15

Carbon materials are, in general, very good absorbents of microwaves, i.e., they are easily heated by microwave radiation. This characteristic allows them to be transformed by microwave heating, giving rise to new carbons with tailored properties, to be used as microwave receptors, in order to heat other materials indirectly, or to act as a catalyst and microwave receptor in different heterogeneous reactions. In recent years, the number of processes that combine the use of carbons and microwave heating instead of other methods based on conventional heating has increased. In this paper some of the microwave-assisted processes in which carbon materials are produced, transformed or used in thermal treatments (generally, as microwave absorbers and catalysts) are reviewed and the main achievements of this technique are compared with those obtained by means of conventional (non microwave-assisted) methods in similar conditions. (author)

Microwave Sensors for Breast Cancer Detection.

Science.gov (United States)

Wang, Lulu

2018-02-23

Breast cancer is the leading cause of death among females, early diagnostic methods with suitable treatments improve the 5-year survival rates significantly. Microwave breast imaging has been reported as the most potential to become the alternative or additional tool to the current gold standard X-ray mammography for detecting breast cancer. The microwave breast image quality is affected by the microwave sensor, sensor array, the number of sensors in the array and the size of the sensor. In fact, microwave sensor array and sensor play an important role in the microwave breast imaging system. Numerous microwave biosensors have been developed for biomedical applications, with particular focus on breast tumor detection. Compared to the conventional medical imaging and biosensor techniques, these microwave sensors not only enable better cancer detection and improve the image resolution, but also provide attractive features such as label-free detection. This paper aims to provide an overview of recent important achievements in microwave sensors for biomedical imaging applications, with particular focus on breast cancer detection. The electric properties of biological tissues at microwave spectrum, microwave imaging approaches, microwave biosensors, current challenges and future works are also discussed in the manuscript.

Growth Rate and Relocation Movements of Common Nighthawk (Chordeiles minor) Nestlings in Relation to Age

Science.gov (United States)

Kramer, Gunnar R.; Chalfoun, Anna D.

2012-01-01

Relocation by dependent young is a survival strategy that occurs among a wide range of taxa. The Common Nighthawk (Chordeiles minor) lays its eggs on bare substrate and, once hatched, nestlings may relocate to new sites daily. We located and monitored eight Common Nighthawk nests in Grand Teton National Park, Wyoming, quantified inter-use-site distances in relation to nestling age, and calculated a nestling growth rate curve. Common Nighthawk nestlings grow in a nearly linear fashion. Nestlings moved up to 48 m in a single day and larger, older nestlings tended to move greater distances between daily use-sites.

The influence of microwave irradiation on rocks for microwave-assisted underground excavation

Directory of Open Access Journals (Sweden)

Ferri Hassani

2016-02-01

Full Text Available Demand is growing for explosive-free rock breakage systems for civil and mining engineering, and space industry applications. This paper highlights the work being undertaken in the Geomechanics Laboratory of McGill University to make a real application of microwave-assisted mechanical rock breakage to full-face tunneling machines and drilling. Comprehensive laboratory tests investigated the effect of microwave radiation on temperature profiles and strength reduction in hard rocks (norite, granite, and basalt for a range of exposure times and microwave power levels. The heating rate on the surface of the rock specimens linearly decreased with distance between the sample and the microwave antenna, regardless of microwave power level and exposure time. Tensile and uniaxial compressive strengths were reduced with increasing exposure time and power level. Scanning electron micrographs (SEMs highlighted fracture development in treated basalt. It was concluded that the microwave power level has a strong positive influence on the amount of heat damage induced to the rock surface. Numerical simulations of electric field intensity and wave propagation conducted with COMSOL Multiphysics® software generated temperature profiles that were in close agreement with experimental results.

Foreign investment, divestment and relocation by Japanese electronics firms in East Asia

NARCIS (Netherlands)

Belderbos, R.A.; Zou, J.

2006-01-01

Although foreign divestment and international relocation by multinational firms carry important economic implications for the industrialization of East Asian countries, there has been little empirical research on these issues. In this paper we analyze the magnitude and pattern of foreign divestment

Thermoactivation of viruses by microwaves

Energy Technology Data Exchange (ETDEWEB)

Mahnel, H.; von Brodorotti, H.S.

1981-01-01

Eight different viruses, suspended in drinking water, were examined for their ability to be inactivated by microwaves from a microwave oven. Up to a virus content of 10/sup 5/ TCID/sub 50//ml inactivation was successful within a few minutes of microwave treatment and occurred in parallel to the heat stability of the viruses. Evidence for direct effects of microwaves on viruses could not be detected. 7 of the viruses studied were inactivated rapidly when temperatures of 50 to 65/sup 0/C under microwave treatment were reached in the flowing water, while a bovine parvovirus was only inactivated by temperatures above 90/sup 0/C. The advantages of a thermal virus-decontamination of fluids and material by microwaves are discussed.

Microwave. Instructor's Edition. Louisiana Vocational-Technical Education.

Science.gov (United States)

Blanton, William

This publication contains related study assignments and job sheets for a course in microwave technology. The course is organized into 12 units covering the following topics: introduction to microwave, microwave systems, microwave oscillators, microwave modulators, microwave transmission lines, transmission lines, detectors and mixers, microwave…

Advances in microwaves

CERN Document Server

Young, Leo

1967-01-01

Advances in Microwaves, Volume 2 focuses on the developments in microwave solid-state devices and circuits. This volume contains six chapters that also describe the design and applications of diplexers and multiplexers. The first chapter deals with the parameters of the tunnel diode, oscillators, amplifiers and frequency converter, followed by a simple physical description and the basic operating principles of the solid state devices currently capable of generating coherent microwave power, including transistors, harmonic generators, and tunnel, avalanche transit time, and diodes. The next ch

Should We Leave? Attitudes towards Relocation in Response to Sea Level Rise

Directory of Open Access Journals (Sweden)

Jie Song

2017-12-01

Full Text Available The participation of individuals contributes significantly to the success of sea level rise adaptation. This study therefore addresses what influences people’s likelihood of relocating away from low-lying areas in response to rising sea levels. The analysis was based on a survey conducted in the City of Panama Beach in Florida (USA. Survey items relate to people’s risk perception, hazard experience, threat appraisal, and coping appraisal, whose theoretical background is Protection Motivation Theory. Descriptive and correlation analysis was first performed to highlight critical factors which were then examined by a multinomial Logit model. Results show that sea level rise awareness is the major explanatory variable. Coping appraisal is qualitatively viewed as a strong predictor for action, while threat appraisal is statistically significant in driving relocation intention. These factors should be integrated in current risk communication regarding sea level rise.

Earthquake hypocenter relocation using double difference method in East Java and surrounding areas

International Nuclear Information System (INIS)

C, Aprilia Puspita; Nugraha, Andri Dian; Puspito, Nanang T

2015-01-01

Determination of precise hypocenter location is very important in order to provide information about subsurface fault plane and for seismic hazard analysis. In this study, we have relocated hypocenter earthquakes in Eastern part of Java and surrounding areas from local earthquake data catalog compiled by Meteorological, Climatological, and Geophysical Agency of Indonesia (MCGA) in time period 2009-2012 by using the double-difference method. The results show that after relocation processes, there are significantly changes in position and orientation of earthquake hypocenter which is correlated with the geological setting in this region. We observed indication of double seismic zone at depths of 70-120 km within the subducting slab in south of eastern part of Java region. Our results will provide useful information for advance seismological studies and seismic hazard analysis in this study

Earthquake hypocenter relocation using double difference method in East Java and surrounding areas

Energy Technology Data Exchange (ETDEWEB)

C, Aprilia Puspita [Geophysical Engineering Program, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia); Meteorological, Climatological, and Geophysical Agency (MCGA) of Indonesian, Jakarta (Indonesia); Nugraha, Andri Dian, E-mail: nugraha@gf.itb.ac.id [Geophysical Engineering Program, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia); Puspito, Nanang T [Global Geophysical Research Group, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia)

2015-04-24

Determination of precise hypocenter location is very important in order to provide information about subsurface fault plane and for seismic hazard analysis. In this study, we have relocated hypocenter earthquakes in Eastern part of Java and surrounding areas from local earthquake data catalog compiled by Meteorological, Climatological, and Geophysical Agency of Indonesia (MCGA) in time period 2009-2012 by using the double-difference method. The results show that after relocation processes, there are significantly changes in position and orientation of earthquake hypocenter which is correlated with the geological setting in this region. We observed indication of double seismic zone at depths of 70-120 km within the subducting slab in south of eastern part of Java region. Our results will provide useful information for advance seismological studies and seismic hazard analysis in this study.

Gold Nanoparticle Microwave Synthesis

Energy Technology Data Exchange (ETDEWEB)

Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coopersmith, Kaitlin [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-07-27

At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however, polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, and a reduction in reaction time from 10 minutes to 1 minute; this maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

Gold Nanoparticle Microwave Synthesis

International Nuclear Information System (INIS)

Krantz, Kelsie E.; Christian, Jonathan H.; Coopersmith, Kaitlin; Washington II, Aaron L.; Murph, Simona H.

2016-01-01

At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however, polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, and a reduction in reaction time from 10 minutes to 1 minute; this maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

Non-self-sustained microwave discharge and the concept of a microwave air jet engine

International Nuclear Information System (INIS)

Batanov, G M; Gritsinin, S I; Kossyi, I A

2002-01-01

A new type of microwave discharge - near-surface non-self-sustained discharge (NSND) - has been realized and investigated. A physical model of this discharge is presented. For the first time NSND application for microwave air jet engines has been proposed. Measurements under laboratory conditions modelling the microwave air jet engine operation shows the qualitative agreement between the model of NSND and actual processes near the target irradiated by a powerful microwave beam. Characteristic dependences of recoil momentum of target on the background pressure and microwave pulse duration obtained in experiments are presented. Measured cost of thrust produced by the NSND is no more than 3.0 kW N -1 , which is close to the predicted values

Relocation of radioactive residuals store: environment effects statement

International Nuclear Information System (INIS)

1984-11-01

This Environment Effects Statement describes and assesses the likely environmental effects of the proposal to relocate the Health Commission's existing radioactive residuals store to a site within the established Dutson Downs waste disposal area, located 20 km south-east of Sale and 225 km east of Melbourne. The information presented demonstrates that the siting and construction of the proposed radioactive residuals store and the procedures to be adopted for the handling and storage of materials will not present an unacceptable risk to public health and safety, nor will it involve any significant adverse environmental effects

Motivations for active commuting: a qualitative investigation of the period of home or work relocation.

Science.gov (United States)

Jones, Caroline H D; Ogilvie, David

2012-09-11

Promoting walking or cycling to work (active commuting) could help to increase population physical activity levels. According to the habit discontinuity and residential self-selection hypotheses, moving home or workplace is a period when people (re)assess, and may be more likely to change, their travel behavior. Research in this area is dominated by the use of quantitative research methods, but qualitative approaches can provide in-depth insight into the experiences and processes of travel behavior change. This qualitative study aimed to explore experiences and motivations regarding travel behavior around the period of relocation, in an effort to understand how active commuting might be promoted more effectively. Participants were recruited from the Commuting and Health in Cambridge study cohort in the UK. Commuters who had moved home, workplace or both between 2009 and 2010 were identified, and a purposive sample was invited to participate in semi-structured interviews regarding their experiences of, and travel behavior before and after, relocating. A grounded theory approach was taken to analysis. Twenty-six commuters participated. Participants were motivated by convenience, speed, cost and reliability when selecting modes of travel for commuting. Physical activity was not a primary motivation, but incidental increases in physical activity were described and valued in association with active commuting, the use of public transport and the use of park-and-ride facilities. Emphasizing and improving the relative convenience, cost, speed and reliability of active commuting may be a more promising approach to promoting its uptake than emphasizing the health benefits, at least around the time of relocation. Providing good quality public transport and free car parking within walking or cycling distance of major employment sites may encourage the inclusion of active travel in the journey to work, particularly for people who live too far from work to walk or cycle the

Motivations for active commuting: a qualitative investigation of the period of home or work relocation

Directory of Open Access Journals (Sweden)

Jones Caroline HD

2012-09-01

Full Text Available Abstract Background Promoting walking or cycling to work (active commuting could help to increase population physical activity levels. According to the habit discontinuity and residential self-selection hypotheses, moving home or workplace is a period when people (reassess, and may be more likely to change, their travel behavior. Research in this area is dominated by the use of quantitative research methods, but qualitative approaches can provide in-depth insight into the experiences and processes of travel behavior change. This qualitative study aimed to explore experiences and motivations regarding travel behavior around the period of relocation, in an effort to understand how active commuting might be promoted more effectively. Methods Participants were recruited from the Commuting and Health in Cambridge study cohort in the UK. Commuters who had moved home, workplace or both between 2009 and 2010 were identified, and a purposive sample was invited to participate in semi-structured interviews regarding their experiences of, and travel behavior before and after, relocating. A grounded theory approach was taken to analysis. Results Twenty-six commuters participated. Participants were motivated by convenience, speed, cost and reliability when selecting modes of travel for commuting. Physical activity was not a primary motivation, but incidental increases in physical activity were described and valued in association with active commuting, the use of public transport and the use of park-and-ride facilities. Conclusions Emphasizing and improving the relative convenience, cost, speed and reliability of active commuting may be a more promising approach to promoting its uptake than emphasizing the health benefits, at least around the time of relocation. Providing good quality public transport and free car parking within walking or cycling distance of major employment sites may encourage the inclusion of active travel in the journey to work

Relocation of cryopreserved umbilical cord blood samples using a high-capacity dry shipper to a new laboratory: a cord blood banking experience.

Science.gov (United States)

Thiagarajah, Kalaivani; Wong, Chee-Yin; Vijayan, Vickneswary Veera; Ooi, Ghee-Chien; Ng, Mei-Theng; Cheong, Soon-Keng; Then, Kong-Yong

2015-05-01

Processed umbilical cord blood (UCB) must be stored at cryogenic temperature at all times to maintain the quality and viability of the cells. However, a challenge is presented in the form of moving a large number of cryopreserved UCB samples to a new location. In this report, we share our experience on relocating more than 100,000 units of cryopreserved UCB samples stored in 12 liquid nitrogen freezers (LNFs) to our new laboratory. For quality control purposes, 2 weeks before relocation, donor UCB samples were processed, cryopreserved, and stored in each LNF. On relocation day, half of the samples were retrieved to determine total nucleated cell count, percentage of CD34+ cells, and cell viability as controls for later comparison. UCB samples were transferred into dry shippers before being relocated to the new laboratory. Upon arrival, LNFs were serviced before transferring UCB samples back into its original location within the LNF. The remaining donor UCB samples were retrieved and analyzed for the same tests mentioned. We found no significant differences in pre- and postrelocation values of the tests performed. All UCB samples were successfully relocated into the new laboratory without affecting the quality. © 2014 AABB.

Parameter prediction for microwave garnets

International Nuclear Information System (INIS)

Ramer, R.

1996-01-01

Full text: Linearity of the microwave parameters (resonance linewidth ΔH and effective linewidth ΔH eff ) is demonstrated and their use in the Computer-aided design (CAD)/Computer-aided manufacturing (CAM) of new microwave garnets is proposed. Such an approach would combine a numerical database of microwave data and several computational programs. The model is an applied formulation of the analysis of a wide range of microwave garnets

Effects of Relocation and Individual and Environmental Factors on the Long-Term Stress Levels in Captive Chimpanzees (Pan troglodytes: Monitoring Hair Cortisol and Behaviors.

Directory of Open Access Journals (Sweden)

Yumi Yamanashi

Full Text Available Understanding the factors associated with the long-term stress levels of captive animals is important from the view of animal welfare. In this study, we investigated the effects of relocation in addition to individual and environmental factors related to social management on long-term stress level in group-living captive chimpanzees by examining behaviors and hair cortisol (HC. Specifically, we conducted two studies. The first compared changes in HC levels before and after the relocation of 8 chimpanzees (Study 1 and the second examined the relationship between individual and environmental factors and individual HC levels in 58 chimpanzees living in Kumamoto Sanctuary (KS, Kyoto University (Study 2. We hypothesized that relocation, social situation, sex, and early rearing conditions, would affect the HC levels of captive chimpanzees. We cut arm hair from chimpanzees and extracted and assayed cortisol with an enzyme immunoassay. Aggressive behaviors were recorded ad libitum by keepers using a daily behavior monitoring sheet developed for this study. The results of Study 1 indicate that HC levels increased during the first year after relocation to the new environment and then decreased during the second year. We observed individual differences in reactions to relocation and hypothesized that social factors may mediate these changes. In Study 2, we found that the standardized rate of receiving aggression, rearing history, sex, and group formation had a significant influence on mean HC levels. Relocation status was not a significant factor, but mean HC level was positively correlated with the rate of receiving aggression. Mean HC levels were higher in males than in females, and the association between aggressive interactions and HC levels differed by sex. These results suggest that, although relocation can affect long-term stress level, individuals' experiences of aggression and sex may be more important contributors to long-term stress than

Antinociceptive effects of voluntarily ingested buprenorphine in the hot-plate test in laboratory rats

DEFF Research Database (Denmark)

Kristensen, Sara Hestehave; Munro, Gordon; Brønnum Pedersen, Tina

2017-01-01

the animal to a thermal stimulus using a hot plate, significant antinociceptive effects of voluntarily ingested buprenorphine administered in Nutella® were demonstrated. This was evident at doses of 1.0 mg/kg 60 and 120 min post administration (Peffects were not as marked......Researchers performing experiments on animals should always strive towards the refinement of experiments, minimization of stress and provision of better animal welfare. An adequate analgesic strategy is important to improve post-operative recovery and welfare in laboratory rats and mice....... In addition, it is desirable to provide post-operative analgesia using methods that are minimally invasive and stressful. This study investigated the antinociceptive effects of orally administered buprenorphine ingested in Nutella® in comparison with subcutaneous buprenorphine administration. By exposing...

41 CFR 301-10.117 - May I keep compensation an airline gives me for voluntarily vacating my seat on my scheduled...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false May I keep compensation an airline gives me for voluntarily vacating my seat on my scheduled airline flight when the airline asks for volunteers? 301-10.117 Section 301-10.117 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY)...

A study on microwave oxidation of landfill leachate—Contributions of microwave-specific effects

International Nuclear Information System (INIS)

Chou, Yu-Chieh; Lo, Shang-Lien; Kuo, Jeff; Yeh, Chih-Jung

2013-01-01

Highlights: ► pH has an insignificant effect on TOC removals and 550 W has a well performance. ► MOP has well removals of color, UV 254 , and TOC at 550 W/85 °C. ► TOC removals were higher at higher microwave setting (550 W vs. 128 W). ► The microwave-specific effects on TOC removal were usually synergistic in MOP. ► COD analyses showed persulfate decayed rapidly in either MOP or CHO treatment. -- Abstract: Microwave oxidation process (MOP) was evaluated for treatment of landfill leachate. The experimental parameters include pH, temperature, oxidant doses, microwave power setting, and irradiation time. The study explored the microwave-specific effects of the MOP. The contributions of pure thermal, persulfate oxidation and microwave irradiation on TOC removal were quantified. It was then found the combinations of them were usually synergistic in MOP except two of them were antagonistic (128 W/85 °C/1 M Na 2 S 2 O 8 and 128 W/85 °C/2 M Na 2 S 2 O 8 ). At the highest temperature tested (85 °C) in this study, microwave irradiation may cause generation and termination of oxidizing radicals at adverse rates. The study also found that persulfate decayed rapidly in either MOP or conventional heating oxidation (CHO) treatment of landfill leachate

Non-Ionizing Radiation Used in Microwave Ovens

Science.gov (United States)

... Non-Ionizing Radiation Used in Microwave Ovens Non-Ionizing Radiation Used in Microwave Ovens Explore the interactive, virtual ... can do Where to learn more About Non-Ionizing Radiation Used in Microwave Ovens Microwave Oven. Microwave ovens ...

Classification of delocalization power of global unitary operations in terms of LOCC one-piece relocalization

Directory of Open Access Journals (Sweden)

Akihito Soeda

2010-06-01

Full Text Available We study how two pieces of localized quantum information can be delocalized across a composite Hilbert space when a global unitary operation is applied. We classify the delocalization power of global unitary operations on quantum information by investigating the possibility of relocalizing one piece of the quantum information without using any global quantum resource. We show that one-piece relocalization is possible if and only if the global unitary operation is local unitary equivalent of a controlled-unitary operation. The delocalization power turns out to reveal different aspect of the non-local properties of global unitary operations characterized by their entangling power.

Nest Relocation and Colony Founding in the Australian Desert Ant, Melophorus bagoti Lubbock (Hymenoptera: Formicidae

Directory of Open Access Journals (Sweden)

Patrick Schultheiss

2010-01-01

Full Text Available Even after years of research on navigation in the Red Honey Ant, Melophorus bagoti, much of its life history remains elusive. Here, we present observations on nest relocation and the reproductive and founding stages of colonies. Nest relocation is possibly aided by trail laying behaviour, which is highly unusual for solitary foraging desert ants. Reproduction occurs in synchronised mating flights, which are probably triggered by rain. Queens may engage in multiple matings, and there is circumstantial evidence that males are chemically attracted to queens. After the mating flight, the queens found new colonies independently and singly. Excavation of these founding colonies reveals first insights into their structure.

Modeling microwave/electron-cloud interaction

International Nuclear Information System (INIS)

Mattes, M; Sorolla, E; Zimmermann, F

2013-01-01

Starting from the separate codes BI-RME and ECLOUD or PyECLOUD, we are developing a novel joint simulation tool, which models the combined effect of a charged particle beam and of microwaves on an electron cloud. Possible applications include the degradation of microwave transmission in telecommunication satellites by electron clouds; the microwave-transmission techniques being used in particle accelerators for the purpose of electroncloud diagnostics; the microwave emission by the electron cloud itself in the presence of a magnetic field; and the possible suppression of electron-cloud formation in an accelerator by injecting microwaves of suitable amplitude and frequency. A few early simulation results are presented. (author)

Model for melt blockage (slug) relocation and physico-chemical interactions during core degradation under severe accident conditions

International Nuclear Information System (INIS)

Veshchunov, M.S.; Shestak, V.E.

2008-01-01

The model describing massive melt blockage (slug) relocation and physico-chemical interactions with steam and surrounding fuel rods of a bundle is developed on the base of the observations in the CORA tests. Mass exchange owing to slug oxidation and fuel rods dissolution is described by the previously developed 2D model for the molten pool oxidation. Heat fluxes in oxidising melt along with the oxidation heat effect at the melt relocation front are counterbalanced by the heat losses in the surrounding media and the fusion heat effect of the Zr claddings attacked by the melt. As a result, the slug relocation velocity is calculated from the heat flux matches at the melt propagation front (Stefan problem). A numerical module simulating the slug behaviour is developed by tight coupling of the heat and mass exchange modules. The new model demonstrates a reasonable capability to simulate the main features of the massive slug behaviour observed in the CORA-W1 test

Effects of lignocellulosic composition and microwave power level on the gaseous product of microwave pyrolysis

International Nuclear Information System (INIS)

Huang, Yu-Fong; Chiueh, Pei-Te; Kuan, Wen-Hui; Lo, Shang-Lien

2015-01-01

Agricultural residues are abundant resources to produce renewable energy and valuable chemicals. This study focused on the effects of lignocellulosic composition and microwave power level on the gaseous product of microwave pyrolysis of agricultural residues. When agricultural residues were under microwave radiation within 10 min, the maximum temperatures of approximately 320, 420, and 530 °C were achieved at the microwave power levels of 300, 400, and 500 W, respectively. Gas yield increased with increasing microwave power level, whereas solid and liquid yields decreased. Besides, gaseous products with higher H 2 content and higher calorific values can be obtained at higher microwave power levels. In addition to microwave power level, lignocellulosic composition was also an important factor. H 2 and CO 2 yields increased with increasing hemicellulose content, whereas CH 4 and CO yields increased with increasing cellulose content. Four empirical equations were derived to present the contributions of lignocellulosic materials to the yields of gaseous components. - Highlights: • About 530 °C was reached within 10 min at a microwave power level of 500 W. • Gas yield increased with increasing microwave power level. • A high correlation between hemicellulose content and either H 2 or CO 2 yield. • A high correlation between cellulose content and either CH 4 or CO yield. • Empirical equations depict contribution of lignocellulosic content to gas yield

Moving to an active lifestyle? A systematic review of the effects of residential relocation on walking, physical activity and travel behaviour.

Science.gov (United States)

Ding, Ding; Nguyen, Binh; Learnihan, Vincent; Bauman, Adrian E; Davey, Rachel; Jalaludin, Bin; Gebel, Klaus

2018-06-01

To synthesise the literature on the effects of neighbourhood environmental change through residential relocation on physical activity, walking and travel behaviour. Systematic review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines (PROSPERO registration number CRD42017077681). Electronic databases for peer-reviewed and grey literature were systematically searched to March 2017, followed by forward and backward citation tracking. A study was eligible for inclusion if it (1) measured changes in neighbourhood built environment attributes as a result of residential relocation (either prospectively or retrospectively); (2) included a measure of physical activity, walking, cycling or travel modal change as an outcome; (3) was quantitative and (4) included an English abstract or summary. A total of 23 studies was included in the review. Among the eight retrospective longitudinal studies, there was good evidence for the relationship between relocation and walking (consistency score (CS)>90%). For the 15 prospective longitudinal studies, the evidence for the effects of environmental change/relocation on physical activity or walking was weak to moderate (CS mostly <45%), even weaker for effects on other outcomes, including physical activity, cycling, public transport use and driving. Results from risk of bias analyses support the robustness of the findings. The results are encouraging for the retrospective longitudinal relocation studies, but weaker evidence exists for the methodologically stronger prospective longitudinal relocation studies. The evidence base is currently limited, and continued longitudinal research should extend the plethora of cross-sectional studies to build higher-quality evidence. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Integrated microwave photonics

NARCIS (Netherlands)

Marpaung, D.A.I.; Roeloffzen, C.G.H.; Heideman, Rene; Leinse, Arne; Sales, S.; Capmany, J.

2013-01-01

Microwave photonics (MWP) is an emerging field in which radio frequency (RF) signals are generated, distributed, processed and analyzed using the strength of photonic techniques. It is a technology that enables various functionalities which are not feasible to achieve only in the microwave domain. A

Preliminary evaluation of crisis-relocation fallout-shelter options. Volume 2. Detailed analysis

International Nuclear Information System (INIS)

Santini, D.J.; Clinch, J.M.; Davis, F.H.; Hill, L.G.; Lynch, E.P.; Tanzman, E.A.; Wernette, D.R.

1982-12-01

This report presents a preliminary, detailed evaluation of various shelter options for use if the President orders crisis relocation of the US urban population because of strong expectation of a nuclear war. The availability of livable shelter space at 40 ft 2 per person (congregate-care space) by state is evaluated. Options are evaluated for construction of fallout shelters allowing 10 ft 2 per person - such shelters are designed to provide 100% survival at projected levels of radioactive fallout. The FEMA concept of upgrading existing buildings to act as fallout shelters can, in principle, provide adequate shelter throughout most of the US. Exceptions are noted and remedies proposed. In terms of upgrading existing buildings to fallout shelter status, great benefits are possible by turning away from a standard national approach and adopting a more site-specific approach. Existing FEMA research provides a solid foundation for successful crisis relocation planning, but the program can be refined by making suitable modifications in its locational, engineering, and institutionally specific elements

78 FR 8550 - Relocation of Regulations and Rulings, Office of International Trade

Science.gov (United States)

2013-02-06

... Rulings, Office of International Trade AGENCY: U.S. Customs and Border Protection, Department of Homeland... International Trade, of the U.S. Customs and Border Protection (CBP) is relocating its office from the U.S. Mint... correspondence directed to the Regulations and Rulings, Office of International Trade, including mailed comments...

Microwave Resonators and Filters

Science.gov (United States)

2015-12-22

1 Microwave Resonators and Filters Daniel E. Oates MIT Lincoln Laboratory 244 Wood St. Lexington, MA 02478 USA Email: oates@ll.mit.edu...explained in other chapters, the surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the...resonators and filters in the first edition of this handbook (Z.-Y. Shen 2003) discussed the then state of the art of microwave frequency applications

Move it or lose it? The ecological ethics of relocating species under climate change.

Science.gov (United States)

Minteer, Ben A; Collins, James P

2010-10-01

Managed relocation (also known as assisted colonization, assisted migration) is one of the more controversial proposals to emerge in the ecological community in recent years. A conservation strategy involving the translocation of species to novel ecosystems in anticipation of range shifts forced by climate change, managed relocation (MR) has divided many ecologists and conservationists, mostly because of concerns about the potential invasion risk of the relocated species in their new environments. While this is indeed an important consideration in any evaluation of MR, moving species across the landscape in response to predicted climate shifts also raises a number of larger and important ethical and policy challenges that need to be addressed. These include evaluating the implications of a more aggressive approach to species conservation, assessing MR as a broader ecological policy and philosophy that departs from longstanding scientific and management goals focused on preserving ecological integrity, and considering MR within a more comprehensive ethical and policy response to climate change. Given the complexity and novelty of many of the issues at stake in the MR debate, a more dynamic and pragmatic approach to ethical analysis and debate is needed to help ecologists, conservationists, and environmental decision makers come to grips with MR and the emerging ethical challenges of ecological policy and management under global environmental change.

41 CFR 302-12.113 - Under a homesale program, may we direct the relocation services company to pay an employee more...

Science.gov (United States)

2010-07-01

..., may we direct the relocation services company to pay an employee more than the fair market value of... we direct the relocation services company to pay an employee more than the fair market value of his... an employee more than the fair market value (as determined by the residence appraisal process) of his...

Probing the local microwave properties of superconducting thin films by a scanning microwave near-field microscope

CERN Document Server

Wu, L Y; Wang, K L; Jiang, T; Kang, L; Yang, S Z; Wu, P H

2002-01-01

In this paper, we present our approach to probe the local microwave properties of superconducting thin films by using the microwave near-field scanning technique. We have employed a coaxial cavity together with a niobium tip as the probe and established a scanning sample stage cooled by liquid nitrogen to study thin film devices at low temperature in our scanning microwave near-field microscope. Nondestructive images have been obtained on the inhomogeneity of the YBaCuO superconducting thin films at microwave frequency. We believe that these results would be helpful in evaluating the microwave performance of the devices.

Passive Microwave Components and Antennas

DEFF Research Database (Denmark)

State-of-the-art microwave systems always require higher performance and lower cost microwave components. Constantly growing demands and performance requirements of industrial and scientific applications often make employing traditionally designed components impractical. For that reason, the design...... and development process remains a great challenge today. This problem motivated intensive research efforts in microwave design and technology, which is responsible for a great number of recently appeared alternative approaches to analysis and design of microwave components and antennas. This book highlights...... techniques. Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation...

Microwave Tokamak Experiment

International Nuclear Information System (INIS)

Anon.

1988-01-01

The Microwave Tokamak Experiment, now under construction at the Laboratory, will use microwave heating from a free-electron laser. The intense microwave pulses will be injected into the tokamak to realize several goals, including a demonstration of the effects of localized heat deposition within magnetically confined plasma, a better understanding of energy confinement in tokamaks, and use of the new free-electron laser technology for plasma heating. The experiment, soon to be operational, provides an opportunity to study dense plasmas heated by powers unprecedented in the electron-cyclotron frequency range required by the especially high magnetic fields used with the MTX and needed for reactors. 1 references, 5 figures, 3 tables

Medical preparation container comprising microwave powered sensor assembly

DEFF Research Database (Denmark)

2016-01-01

The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave ...... oven. The microwave powered sensor assembly is configured for harvesting energy from microwave radiation emitted by the microwave oven and energize the sensor by the harvested microwave energy.......The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave...

Microwave and RF engineering

CERN Document Server

Sorrentino, Roberto

2010-01-01

An essential text for both students and professionals, combining detailed theory with clear practical guidance This outstanding book explores a large spectrum of topics within microwave and radio frequency (RF) engineering, encompassing electromagnetic theory, microwave circuits and components. It provides thorough descriptions of the most common microwave test instruments and advises on semiconductor device modelling. With examples taken from the authors' own experience, this book also covers:network and signal theory;electronic technology with guided electromagnetic pr

Relocation due to Climate Change: Mapping the Divergent Responses of the Governments of Tuvalu and Kiribati

Science.gov (United States)

McNamara, K. E.; Hemstock, S.; Smith, R.; Holland, E. A.

2012-12-01

Climate change will continue to impact Pacific Island livelihoods in diverse and complex ways. At the 2009 Copenhagen Conference of Parties to discuss the United Nations Framework Convention on Climate Change, Pacific governments argued for the need to limit warming to 1.5°C. A growing body of literature demonstrates that warming beyond this 2°C threshold is likely and will result in numerous negative impacts on socio-ecological systems across the world, particularly for low-lying coastal communities (Parry et al, 2009; Smith et al, 2009). These communities will need to manage, if possible,a series of interconnected impacts, such as declining freshwater and food security and diminishing land availability, as a result of sea level rise and increasing extreme weather events (Adger and Barnett, 2009). Discussions concerning climate change as a trigger for relocation for low-lying Pacific nations have been contentious, and are fuelled by emotion and varying degrees of sensitivity. As Hayward-Jones (2010: 2) lamented: 'What is at stake over the next decade is not a sinking island but the very viability of life on this fragile atoll state. The land mass of Tuvalu will still exist in 2020 but it may be unable to support the population'. While this debate has historical roots, and indeed the phenomenon of relocation due to localised environmental degradation is not something new in the Pacific, it remains a significant contemporary issue. Scholars have argued that a 'successful mix of strategies' is required to develop culturally-appropriate solutions to this concern about the need for low-lying coastal communities in the Pacific to relocate (Bedford and Bedford, 2010: 93). As such, this paper assesses how the national governments of two low-lying nations in the Pacific - Tuvalu and Kiribati - are mapping out very different long-term strategies to respond to climate change impacts and concerns about the possibility of relocation. The governments of Tuvalu and Kiribati

41 CFR 102-73.305 - What relocation assistance policy must Federal agencies follow?

Science.gov (United States)

2010-07-01

... displaced person for actual— (a) Reasonable moving expenses (in moving himself, his family, and business... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What relocation... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL...

Discussion on Microwave-Matter Interaction Mechanisms by In Situ Observation of "Core-Shell" Microstructure during Microwave Sintering.

Science.gov (United States)

Liu, Wenchao; Xu, Feng; Li, Yongcun; Hu, Xiaofang; Dong, Bo; Xiao, Yu

2016-02-23

This research aims to deepen the understanding of the interaction mechanisms between microwave and matter in a metal-ceramic system based on in situ synchrotron radiation computed tomography. A special internal "core-shell" microstructure was discovered for the first time and used as an indicator for the interaction mechanisms between microwave and matter. Firstly, it was proved that the microwave magnetic field acted on metal particles by way of inducing an eddy current in the surface of the metal particles, which led to the formation of a "core-shell" microstructure in the metal particles. On this basis, it was proposed that the ceramic particles could change the microwave field and open a way for the microwave, thereby leading to selective heating in the region around the ceramic particles, which was verified by the fact that all the "core-shell" microstructure was located around ceramic particles. Furthermore, it was indicated that the ceramic particles would gather the microwaves, and might lead to local heating in the metal-ceramic contact region. The focusing of the microwave was proved by the quantitative analysis of the evolution rate of the "core-shell" microstructure in a different region. This study will help to reveal the microwave-matter interaction mechanisms during microwave sintering.

Reassessment of 50 years of seismicity in Simav-Gediz grabens (Western Turkey), based on earthquake relocations

Science.gov (United States)

Karasozen, E.; Nissen, E.; Bergman, E. A.; Walters, R. J.

2013-12-01

Western Turkey is a rapidly deforming region with a long history of high-magnitude normal faulting earthquakes. However, the locations and slip rates of the responsible faults are poorly constrained. Here, we reassess a series of large instrumental earthquakes in the Simav-Gediz region, an area exhibiting a strong E-W gradient in N-S extension rates, from low rates bordering the Anatolian Plateau to much higher rates in the west. We start with investigating a recent Mw 5.9 earthquake at Simav (19 May 2011) using InSAR, teleseismic body-wave modeling and field observations. Next, we exploit the small but clear InSAR signal to relocate a series of older, larger earthquakes, using a calibrated earthquake relocation method which is based on the hypocentroidial decomposition (HDC) method for multiple event relocation. These improved locations in turn provide an opportunity to reassess the regional style of deformation. One interesting aspect of these earthquakes is that the largest (the Mw 7.2 Gediz earthquake, March 1970) occurred in an area of slow extension and indistinct surface faulting, whilst the well-defined and more rapidly extending Simav graben has ruptured in several smaller, Mw 6 events. However, our relocations highlight the existence of a significant gap in instrumental earthquakes along the central Simav graben, which, if it ruptured in a single event, could equal ~Mw 7. We were unable to identify fault scarps along this section due to dense vegetation and human modification, and we suggest that acquiring LiDAR data in this area should be a high priority in order to properly investigate earthquake hazard in the Simav graben.

Microwave firing of MnZn-ferrites

International Nuclear Information System (INIS)

Tsakaloudi, V.; Papazoglou, E.; Zaspalis, V.T.

2004-01-01

Microwave firing is evaluated in comparison to conventional firing for MnZn-ferrites. For otherwise identical conditions, microwave firing results to higher densities and coarser microstructures. Initial magnetic permeability values (25 kHz, 25 deg. C, <0.1 mT) after conventional firing are approximately 5000, but the corresponding values after microwave firing are approximately 6000. Unlike the conventional firing process, the final density after microwave firing is increased by increasing the prefiring temperature. As appears from the results of this study, microwave firing could be in principle a promising MnZn-ferrite firing technology for materials to be used in high magnetic permeability applications. No advantages of microwave firing are evident for materials intended to be used in high field power applications

The 2008 Wells, Nevada earthquake sequence: Source constraints using calibrated multiple event relocation and InSAR

Science.gov (United States)

Nealy, Jennifer; Benz, Harley M.; Hayes, Gavin; Berman, Eric; Barnhart, William

2017-01-01

The 2008 Wells, NV earthquake represents the largest domestic event in the conterminous U.S. outside of California since the October 1983 Borah Peak earthquake in southern Idaho. We present an improved catalog, magnitude complete to 1.6, of the foreshock-aftershock sequence, supplementing the current U.S. Geological Survey (USGS) Preliminary Determination of Epicenters (PDE) catalog with 1,928 well-located events. In order to create this catalog, both subspace and kurtosis detectors are used to obtain an initial set of earthquakes and associated locations. The latter are then calibrated through the implementation of the hypocentroidal decomposition method and relocated using the BayesLoc relocation technique. We additionally perform a finite fault slip analysis of the mainshock using InSAR observations. By combining the relocated sequence with the finite fault analysis, we show that the aftershocks occur primarily updip and along the southwestern edge of the zone of maximum slip. The aftershock locations illuminate areas of post-mainshock strain increase; aftershock depths, ranging from 5 to 16 km, are consistent with InSAR imaging, which shows that the Wells earthquake was a buried source with no observable near-surface offset.

Controlled Microwave Heating Accelerates Rolling Circle Amplification.

Directory of Open Access Journals (Sweden)

Takeo Yoshimura

Full Text Available Rolling circle amplification (RCA generates single-stranded DNAs or RNA, and the diverse applications of this isothermal technique range from the sensitive detection of nucleic acids to analysis of single nucleotide polymorphisms. Microwave chemistry is widely applied to increase reaction rate as well as product yield and purity. The objectives of the present research were to apply microwave heating to RCA and indicate factors that contribute to the microwave selective heating effect. The microwave reaction temperature was strictly controlled using a microwave applicator optimized for enzymatic-scale reactions. Here, we showed that microwave-assisted RCA reactions catalyzed by either of the four thermostable DNA polymerases were accelerated over 4-folds compared with conventional RCA. Furthermore, the temperatures of the individual buffer components were specifically influenced by microwave heating. We concluded that microwave heating accelerated isothermal RCA of DNA because of the differential heating mechanisms of microwaves on the temperatures of reaction components, although the overall reaction temperatures were the same.

Controlled Microwave Heating Accelerates Rolling Circle Amplification.

Science.gov (United States)

Yoshimura, Takeo; Suzuki, Takamasa; Mineki, Shigeru; Ohuchi, Shokichi

2015-01-01

Rolling circle amplification (RCA) generates single-stranded DNAs or RNA, and the diverse applications of this isothermal technique range from the sensitive detection of nucleic acids to analysis of single nucleotide polymorphisms. Microwave chemistry is widely applied to increase reaction rate as well as product yield and purity. The objectives of the present research were to apply microwave heating to RCA and indicate factors that contribute to the microwave selective heating effect. The microwave reaction temperature was strictly controlled using a microwave applicator optimized for enzymatic-scale reactions. Here, we showed that microwave-assisted RCA reactions catalyzed by either of the four thermostable DNA polymerases were accelerated over 4-folds compared with conventional RCA. Furthermore, the temperatures of the individual buffer components were specifically influenced by microwave heating. We concluded that microwave heating accelerated isothermal RCA of DNA because of the differential heating mechanisms of microwaves on the temperatures of reaction components, although the overall reaction temperatures were the same.

The negative effects of development megaprojects: Comparative study of four cases of population relocation related to dam projects

International Nuclear Information System (INIS)

D'Almeida, K.

1993-11-01

As with any other hydroelectric installation project around the world, the construction of large dams in Africa such as the Kariba in Zambia, the Aswan High Dam in Egypt, the Akossombo in Ghana, and the Kossou in Ivory Coast have caused massive displacements of populations. Parallel to the attendant positive effects, negative effects have been observed following the relocation of those populations. These negative effects are social, cultural, political, economic, sanitary, demographic, psychological, and ecological. A comparative study is conducted of the four cases of dam construction cited above in order to demonstrate that errors committed by planners were at the source of those negative effects of population displacement. The knowledge of those errors committed in the past should serve as lessons for future instances of population relocation. Such lessons are outlined in the areas of relocation planning, principles of indemnization, re-housing of populations on new sites, and adaptation of the populations to new agricultural techniques. 116 refs., 14 figs., 5 tabs

Thermal Flow and Structure Stability Analyses of High Power Waterload for 2450 MHz microwave applications

International Nuclear Information System (INIS)

Seon, S. W.; Kim, H. J.; Wang, S. J.; Kim, J. N.

2016-01-01

This study is focused on analyzing the internal flow dynamics in the waterload by changing the inlet and outlet locations and adding guide pipeline to the inlet. The internal flow field simulation is done with CFX tool to compare the water flow velocity and temperature distributions in the waterload. The waterload absorbs RF power, converts it to thermal power, and increases the water temperature so that heat could be quickly removed by the water injection. And it is installed on the end of transmission line and is used to absorb reflected RF power. High power waterload with cone-shaped quartz is designed for 10-30 kW power handling at 2450 MHz microwave system. The thermal flow and structural stability analysis for the 2450 MHz waterload is done using ANSYS and the results are presented in this work. Relocation of the inlet and addition of the guide pipeline in the simulation shows a decrease in the localized maximum water temperature and increased water velocity around the heat source. It is also shown that the modified waterload is structurally more stable

Thermal Flow and Structure Stability Analyses of High Power Waterload for 2450 MHz microwave applications

Energy Technology Data Exchange (ETDEWEB)

Seon, S. W.; Kim, H. J.; Wang, S. J. [National Fusion Research Institute, Daejeon (Korea, Republic of); Kim, J. N. [KRF, Anyang (Korea, Republic of)

2016-05-15

This study is focused on analyzing the internal flow dynamics in the waterload by changing the inlet and outlet locations and adding guide pipeline to the inlet. The internal flow field simulation is done with CFX tool to compare the water flow velocity and temperature distributions in the waterload. The waterload absorbs RF power, converts it to thermal power, and increases the water temperature so that heat could be quickly removed by the water injection. And it is installed on the end of transmission line and is used to absorb reflected RF power. High power waterload with cone-shaped quartz is designed for 10-30 kW power handling at 2450 MHz microwave system. The thermal flow and structural stability analysis for the 2450 MHz waterload is done using ANSYS and the results are presented in this work. Relocation of the inlet and addition of the guide pipeline in the simulation shows a decrease in the localized maximum water temperature and increased water velocity around the heat source. It is also shown that the modified waterload is structurally more stable.

Microwave Accelerated Polymerization of 2-Phenyl-2-Oxazoline: Microwave or Temperature Effects?

NARCIS (Netherlands)

Hoogenboom, R.; Leenen, M.A.M.; Wiesbrock, F.D.; Schubert, U.S.

2005-01-01

Summary: Investigations regarding the cationic ring-opening polymerization of 2-phenyl-2-oxazoline under microwave irradiation and conventional heating are reported. This study was inspired by contradictory reports of the (non-)existence of non-thermal microwave effects that might accelerate the

Microwave ablation devices for interventional oncology.

Science.gov (United States)

Ward, Robert C; Healey, Terrance T; Dupuy, Damian E

2013-03-01

Microwave ablation is one of the several options in the ablation armamentarium for the treatment of malignancy, offering several potential benefits when compared with other ablation, radiation, surgical and medical treatment modalities. The basic microwave system consists of the generator, power distribution system and antennas. Often under image (computed tomography or ultrasound) guidance, a needle-like antenna is inserted percutaneously into the tumor, where local microwave electromagnetic radiation is emitted from the probe's active tip, producing frictional tissue heating, capable of causing cell death by coagulation necrosis. Half of the microwave ablation systems use a 915 MHz generator and the other half use a 2450 MHz generator. To date, there are no completed clinical trials comparing microwave devices head-to-head. Prospective comparisons of microwave technology with other treatment alternatives, as well as head-to-head comparison with each microwave device, is needed if this promising field will garner more widespread support and use in the oncology community.

Study of federal microwave standards

Energy Technology Data Exchange (ETDEWEB)

David, L.

1980-08-01

Present and future federal regulatory processes which may impact the permissible levels of microwave radiation emitted by the SPS Microwave Power Transmission (MPTS) were studied. An historical development of US occupational and public microwave standards includes an overview of Western and East European philosophies of environmental protection and neurophysiology which have led to the current widely differing maximum permissible exposure limits to microwaves. The possible convergence of microwave standards is characterized by a lowering of Western exposure levels while Eastern countries consider standard relaxation. A trend toward stricter controls on activities perceived as harmful to public health is under way as is interest in improving the federal regulatory process. Particularly relevant to SPS is the initiation of long-term, low-level microwave exposure programs. Coupled with new developments in instrumentation and dosimetry, the results from chronic exposure program and population exposure studies could be expected within the next five to ten years. Also discussed is the increasing public concern that rf energy is yet another hazardous environmental agent.

41 CFR 302-2.2 - May I relocate to my new official duty station before I receive a written travel authorization (TA)?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false May I relocate to my new official duty station before I receive a written travel authorization (TA)? 302-2.2 Section 302-2.2 Public Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 2...

Preliminary evaluation of crisis-relocation fallout-shelter options. Volume 1. Summary

International Nuclear Information System (INIS)

Santini, D.J.; Clinch, J.M.; Davis, F.H.; Hill, L.G.; Lynch, E.P.; Tanzman, E.A.; Wernette, D.R.

1982-03-01

This report, prepared for the Federal Emergency Management Agency (FEMA), presents a summary evaluation of various shelter options for use in the case where the President orders crisis relocation of the US urban population because of strong expectation of a nuclear war. The availability of livable shelter space at 40 ft 2 per person (congregate-care space) by state is evaluated. Options are evaluated for construction of fallout shelters allowing 10 ft 2 per person - such shelters are designed to provide 100% survival at projected levels of radioactive fallout. The authors find that the FEMA concept of upgrading existing buildings to act as fallout shelters can, in principle, provide adequate shelter throughout most of the US. Exceptions are noted and remedies proposed. The authors also find that, in terms of upgrading existing buildings to fallout shelter status, great benefits are possible by turning away from a standard national approach and adopting a more site-specific approach. Existing FEMA research provides a solid foundation for successful crisis relocation planning, but the program can be refined by making suitable modifications in its locational, engineering, and institutionally specific elements

Microwave processing of radioactive materials-I

International Nuclear Information System (INIS)

White, T.L.; Berry, J.B.

1989-01-01

This paper is the first of two papers that reviews the major past and present applications of microwave energy for processing radioactive materials, with particular emphasis on processing radioactive wastes. Microwave heating occurs through the internal friction produced inside a dielectric material when its molecules vibrate in response to an oscillating microwave field. For this presentation, we shall focus on the two FCC-approved microwave frequencies for industrial, scientific, and medical use, 915 and 2450 MHz. Also, because of space limitations, we shall postpone addressing plasma processing of hazardous wastes using microwave energy until a later date. 13 refs., 4 figs

Microwave processing of ceramic oxide filaments

Energy Technology Data Exchange (ETDEWEB)

Vogt, G.J.; Katz, J.D. [Los Alamos National Laboratory, NM (United States)

1995-05-01

The objective of the microwave filament processing project is to develop microwave techniques at 2.45 GHZ to manufacture continuous ceramic oxide filaments. Microwave processing uses the volumetric absorption of microwave power in oxide filament tows to drive off process solvents, to burn out organic binders, and to sinter the dried fibers to produce flexible, high-strength ceramic filaments. The technical goal is to advance filament processing technology by microwave heating more rapidly with less energy and at a lower cost than conventional processing, but with the same quality as conventional processing. The manufacturing goal is to collaborate with the 3M Company, a US manufacturer of ceramic oxide filaments, to evaluate the technology using a prototype filament system and to transfer the microwave technology to the 3M Company.

Navigating emotions and relationship dynamics: family life review as a clinical tool for older adults during a relocation transition into an assisted living facility.

Science.gov (United States)

O'Hora, Kendra A; Roberto, Karen A

2018-01-16

Relocation for the purpose of receiving care may be one of the more challenging transitions for older adults. The purpose of this study was to facilitate a family life review (FLR) session aimed at enhancing family relationships and assisting older adults in coping with the challenges associated with a relocation. Fourteen dyads comprised of older adults who relocated to an assisted living facility (ALF) and a chosen family member or friend participated in a FLR session and semi-structured follow up interview. Data were analyzed using the constant comparative method and triangulated with descriptive statistics. Emergent themes suggested participating in FLR influenced families by raising emotions, systemically thinking, and navigating the relocation. FLR facilitated positive connections, enhanced existing relationships, and promoted self-acceptance. Families indicated mutual storytelling was enjoyable and reminded them of the urgency to share their story. FLR allowed dyads to reflect and thus prompted a renewed perspective on some of the more challenging components of the relocation transition. Study findings provide insight into how families organize individual and interpersonal narratives and use these narratives during transitional times. FLR can aid families in making a smoother and fulfilling move to an ALF and other late life transitions.

Evaluating superconductors for microwave applications

International Nuclear Information System (INIS)

Hammond, B.; Bybokas, J.

1989-01-01

It is becoming increasingly obvious that some of the earliest applications for high Tc superconductors will be in the microwave market. While this is a major opportunity for the superconductor community, it also represents a significant challenge. At DC or low frequencies a superconductor can be easily characterized by simple measurements of resistivity and magnetic susceptibility versus temperature. These parameters are fundamental to superconductor characterization and various methods exist for measuring them. The only valid way to determine the microwave characteristics of a superconductor is to measure it at microwave frequencies. It is for this reason that measuring microwave surface resistance has emerged as one of the most demanding and telling tests for materials intended for high frequency applications. In this article, the theory of microwave surface resistance is discussed. Methods for characterizing surface resistance theoretically and by practical implementation are described

Microseismic Event Relocation and Focal Mechanism Estimation Based on PageRank Linkage

Science.gov (United States)

Aguiar, A. C.; Myers, S. C.

2017-12-01

Microseismicity associated with enhanced geothermal systems (EGS) is key in understanding how subsurface stimulation can modify stress, fracture rock, and increase permeability. Large numbers of microseismic events are commonly associated with hydroshearing an EGS, making data mining methods useful in their analysis. We focus on PageRank, originally developed as Google's search engine, and subsequently adapted for use in seismology to detect low-frequency earthquakes by linking events directly and indirectly through cross-correlation (Aguiar and Beroza, 2014). We expand on this application by using PageRank to define signal-correlation topology for micro-earthquakes from the Newberry Volcano EGS in Central Oregon, which has been stimulated two times using high-pressure fluid injection. We create PageRank signal families from both data sets and compare these to the spatial and temporal proximity of associated earthquakes. PageRank families are relocated using differential travel times measured by waveform cross-correlation (CC) and the Bayesloc approach (Myers et al., 2007). Prior to relocation events are loosely clustered with events at a distance from the cluster. After relocation, event families are found to be tightly clustered. Indirect linkage of signals using PageRank is a reliable way to increase the number of events confidently determined to be similar, suggesting an efficient and effective grouping of earthquakes with similar physical characteristics (ie. location, focal mechanism, stress drop). We further explore the possibility of using PageRank families to identify events with similar relative phase polarities and estimate focal mechanisms following Shelly et al. (2016) method, where CC measurements are used to determine individual polarities within event clusters. Given a positive result, PageRank might be a useful tool in adaptive approaches to enhance production at well-instrumented geothermal sites. Prepared by LLNL under Contract DE-AC52-07NA27344

Visualization of the microwave beam generated by a plasma relativistic microwave amplifier

Energy Technology Data Exchange (ETDEWEB)

Alekseev, I. S.; Ivanov, I. E.; Strelkov, P. S., E-mail: strelkov@fpl.gpi.ru [Russian Academy of Science, Prokhorov General Physics Institute (Russian Federation); Tarakanov, V. P., E-mail: karat@msk.su [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation); Ulyanov, D. K. [Russian Academy of Science, Prokhorov General Physics Institute (Russian Federation)

2017-03-15

A method based on the detection of emission of a dielectric screen with metal microinclusions in open air is applied to visualize the transverse structure of a high-power microwave beam. In contrast to other visualization techniques, the results obtained in this work provide qualitative information not only on the electric field strength, but also on the structure of electric field lines in the microwave beam cross section. The interpretation of the results obtained with this method is confirmed by numerical simulations of the structure of electric field lines in the microwave beam cross section by means of the CARAT code.

Relocation and the characteristics of hospital and hostel regimes.

Science.gov (United States)

Booth, T; Simons, K; Booth, W

1991-01-01

Drawing on evidence from a research evaluation of a local community care programme, this paper explores whether relocation from a British National Health Service mental handicap hospital into local authority hostels (supervised residential facilities) brought about a qualitative change in the residential environment of movers towards less restrictive management practices and caring routines, more responsive attitudes towards their rights and needs as individuals, and greater control over their own lives. The conclusions point to the existence of a substantial measure of overlap in the fundamental characteristics of the hospital and hostel regimes.

Preliminary evaluation of crisis-relocation fallout-shelter options. Volume 2. Detailed analysis

Energy Technology Data Exchange (ETDEWEB)

Santini, D.J.; Clinch, J.M.; Davis, F.H.; Hill, L.G.; Lynch, E.P.; Tanzman, E.A.; Wernette, D.R.

1982-12-01

This report presents a preliminary, detailed evaluation of various shelter options for use if the President orders crisis relocation of the US urban population because of strong expectation of a nuclear war. The availability of livable shelter space at 40 ft/sup 2/ per person (congregate-care space) by state is evaluated. Options are evaluated for construction of fallout shelters allowing 10 ft/sup 2/ per person - such shelters are designed to provide 100% survival at projected levels of radioactive fallout. The FEMA concept of upgrading existing buildings to act as fallout shelters can, in principle, provide adequate shelter throughout most of the US. Exceptions are noted and remedies proposed. In terms of upgrading existing buildings to fallout shelter status, great benefits are possible by turning away from a standard national approach and adopting a more site-specific approach. Existing FEMA research provides a solid foundation for successful crisis relocation planning, but the program can be refined by making suitable modifications in its locational, engineering, and institutionally specific elements.

The fuel string relocation effect - why the Bruce reactors were derated

Energy Technology Data Exchange (ETDEWEB)

Gold, M; Farooqui, M Z; Adebiyi, A S; Chu, R Y; Le, N T; Oliva, A F [Ontario Hydro, Toronto, ON (Canada); Balog, G; Qu, T; DeBuda, P G [Ontario Hydro, Tiverton, ON (Canada). Bruce Nuclear Generating Station-A

1996-12-31

In the CANDU Safety Analysis process, a series of design basis accidents are chosen and analyzed to confirm safety system effectiveness. Of all the postulated accidents, the Large Break Loss of Coolant Accident (LBLOCA) - a postulated break in the Heat Transport System piping near a component that services a large number of fuel channels - sets the most demanding requirements on the speed and reactivity depth of the shutdown system devices - shutoff rods and liquid poison injection. While the event is extremely improbable, it is reanalyzed periodically and its consequences examined to ensure continued shutdown system effectiveness. In March 1993, an additional effect was identified: if the break occurred in the piping on the inlet side of the core, this would cause sudden movement of the fuel bundles (so-called fuel string relocation) in a large number of channels. In Ontario Hydro`s Bruce NGS A, Bruce NGS B and Darlington reactors, each channel is fuelled against the flow. In this situation, the relocation of the fuel string results in a sudden positive reactivity increase. This reactivity increase is in addition to the reactivity due to the core coolant voiding. The combined reactivity effect could lead to power pulses much higher than those that would arise due to coolant voiding alone. To maintain safety margins in the event of such a postulated accident, the eight Bruce NGS A and Bruce NGS B units were initially derated to 60 percent power within 2 days of the identification and confirmation of this effect. This paper: describes the fuel string relocation phenomenon in detail; explains why the consequences differ at the various Ontario Hydro reactors; outlines the actions taken with respect to each of the Ontario Hydro reactors in the months following March 1993; describes the design solutions implemented to mitigate the problem and return the Bruce reactors to higher powers. 6 refs., 1 tab., 6 figs.

A microwave-augmented plasma torch module

International Nuclear Information System (INIS)

Kuo, S P; Bivolaru, Daniel; Williams, Skip; Carter, Campbell D

2006-01-01

A new plasma torch device which combines arc and microwave discharges to enhance the size and enthalpy of the plasma torch is described. A cylindrical-shaped plasma torch module is integrated into a tapered rectangular cavity to form a microwave adaptor at one end, which couples the microwave power injected into the cavity from the other end to the arc plasma generated by the torch module. A theoretical study of the microwave coupling from the cavity to the plasma torch, as the load, is presented. The numerical results indicate that the microwave power coupling efficiency exceeds 80%. Operational tests of the device indicate that the microwave power is coupled to the plasma torch and that the arc discharge power is increased. The addition of microwave energy enhances the height, volume and enthalpy of the plasma torch when the torch operates at a low airflow rate, and even when the flow speed is supersonic, a noticeable microwave effect on the plasma torch is observed. In addition, the present design allows the torch to be operated as both a fuel injector and igniter. Ignition of ethylene fuel injected through the centre of a tungsten carbide tube acting as the central electrode is demonstrated

24 CFR 1000.14 - What relocation and real property acquisition policies are applicable?

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false What relocation and real property acquisition policies are applicable? 1000.14 Section 1000.14 Housing and Urban Development Regulations... HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT NATIVE AMERICAN HOUSING ACTIVITIES General § 1000.14...

The Impact of DEM Resolution on Relocating Radar Altimetry Data Over Ice Sheets

DEFF Research Database (Denmark)

Fredenslund Levinsen, Joanna; Simonsen, Sebastian Bjerregaard; Sørensen, Louise Sandberg

2016-01-01

for correcting for such mispointing errors. Here, two techniques are applied to observations near Jakobshavn Isbræ, acquired with Envisat’s Radar Altimeter(RA-2). The apriori knowledge on the surface topography is obtained from a digital elevation model. The methods relocate the measurement location horizontally...

Microfabricated Microwave-Integrated Surface Ion Trap

Science.gov (United States)

Revelle, Melissa C.; Blain, Matthew G.; Haltli, Raymond A.; Hollowell, Andrew E.; Nordquist, Christopher D.; Maunz, Peter

2017-04-01

Quantum information processing holds the key to solving computational problems that are intractable with classical computers. Trapped ions are a physical realization of a quantum information system in which qubits are encoded in hyperfine energy states. Coupling the qubit states to ion motion, as needed for two-qubit gates, is typically accomplished using Raman laser beams. Alternatively, this coupling can be achieved with strong microwave gradient fields. While microwave radiation is easier to control than a laser, it is challenging to precisely engineer the radiated microwave field. Taking advantage of Sandia's microfabrication techniques, we created a surface ion trap with integrated microwave electrodes with sub-wavelength dimensions. This multi-layered device permits co-location of the microwave antennae and the ion trap electrodes to create localized microwave gradient fields and necessary trapping fields. Here, we characterize the trap design and present simulated microwave performance with progress towards experimental results. This research was funded, in part, by the Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA).

Advances in microwaves 4

CERN Document Server

Young, Leo

2013-01-01

Advances in Microwaves, Volume 4 covers some innovations in the devices and applications of microwaves. This volume contains three chapters and begins with a discussion of the application of microwave phasers and time delay elements as beam steering elements in array radars. The next chapter provides first an overview of the technical aspects and different types of millimeter waveguides, followed by a survey of their application to railroads. The last chapter examines the general mode of conversion properties of nonuniform waveguides, such as waveguide tapers, using converted Maxwell's equatio

Pyrolysis of tyre powder using microwave thermogravimetric analysis: Effect of microwave power.

Science.gov (United States)

Song, Zhanlong; Yang, Yaqing; Zhou, Long; Zhao, Xiqiang; Wang, Wenlong; Mao, Yanpeng; Ma, Chunyuan

2017-02-01

The pyrolytic characteristics of tyre powder treated under different microwave powers (300, 500, and 700 W) were studied via microwave thermogravimetric analysis. The product yields at different power levels were studied, along with comparative analysis of microwave pyrolysis and conventional pyrolysis. The feedstock underwent preheating, intense pyrolysis, and final pyrolysis in sequence. The main and secondary weight loss peaks observed during the intense pyrolysis stage were attributed to the decomposition of natural rubbers and synthetic rubbers, respectively. The total mass loss rates, bulk temperatures, and maximum temperatures were distinctively higher at higher powers. However, the maximum mass loss rate (0.005 s -1 ), the highest yields of liquid product (53%), and the minimum yields of residual solid samples (43.83%) were obtained at 500 W. Compared with conventional pyrolysis, microwave pyrolysis exhibited significantly different behaviour with faster reaction rates, which can decrease the decomposition temperatures of both natural and synthetic rubber by approximately 110 °C-140 °C.

78 FR 49359 - Pay Under the General Schedule and Recruitment, Relocation, and Retention Incentives

Science.gov (United States)

2013-08-14

.... Agencies may, in their agency retention incentive plans, require documentation of private-sector job offers... Schedule and Recruitment, Relocation, and Retention Incentives AGENCY: U.S. Office of Personnel Management... to improve oversight of recruitment and retention incentive determinations; add succession planning...

Rapid-relocation model for describing high-fluence retention of rare gases implanted in solids

Science.gov (United States)

Wittmaack, K.

2009-09-01

It has been known for a long time that the maximum areal density of inert gases that can be retained in solids after ion implantation is significantly lower than expected if sputter erosion were the only limiting factor. The difference can be explained in terms of the idea that the trapped gas atoms migrate towards the surface in a series of detrapping-trapping events so that reemission takes place well before the receding surface has advanced to the original depth of implantation. Here it is shown that the fluence dependent shift and shape of implantation profiles, previously determined by Rutherford backscattering spectrometry (RBS), can be reproduced surprisingly well by extending a simple retention model originally developed to account only for the effect of surface recession by sputtering ('sputter approximation'). The additional migration of inert gas atoms is formally included by introducing an effective shift parameter Yeff as the sum of the sputtering yield Y and a relocation efficiency Ψrel. The approach is discussed in detail for 145 keV Xe + implanted in Si at normal incidence. Yeff was found to increase with increasing fluence, to arrive at a maximum equivalent to about twice the sputtering yield. At the surface one needs to account for Xe depletion and the limited depth resolution of RBS. The (high-fluence) effect of implanted Xe on the range distributions is discussed on the basis of SRIM calculations for different definitions of the mean target density, including the case of volume expansion (swelling). To identify a 'range shortening' effect, the implanted gas atoms must be excluded from the definition of the depth scale. The impact-energy dependence of the relocation efficiency was derived from measured stationary Xe concentrations. Above some characteristic energy (˜20 keV for Ar, ˜200 keV for Xe), Y exceeds Ψrel. With decreasing energy, however, Ψrel increases rapidly. Below 2-3 keV more than 90% of the reemission of Ar and Xe is estimated

Substance abuse in patients admitted voluntarily and involuntarily to acute psychiatric wards: a national cross-sectional study

Directory of Open Access Journals (Sweden)

Anne Opsal

2011-12-01

Full Text Available Background: Substance abuse and mental disorder comorbidity is high among patients admitted to acute psychiatric wards. The aim of the study was to identify this co-occurrence as a reason for involuntary admission and if specific substance use-related diagnoses were associated with such admissions.Methods: The study was a part of a multicentre, cross-sectional national study carried out during 2005-2006 within a research network of acute mental health services. Seventy-five percent of Norwegian hospitals providing acute in-patient treatment participated. Substance use was measured using the Clinician Rating Scale and the ICD-10 diagnoses F10-19. Diagnostic assessments were performed by the clinicians during hospital stay.Results: Overall, 33.2% (n=1,187 of the total patient population (3,506 were abusing alcohol or drugs prior to admission according to the Clinician Rating Scale. No difference in the overall prevalence of substance abuserelated diagnoses between the two groups was found. Overall, 310 (26% of the admissions, 216 voluntarily and 94 involuntarily admitted patients received a double diagnosis. Frequent comorbid combinations among voluntarily admitted patients were; a combination of alcohol and either mood disorder (40% or multiple mental disorders (29%. Among involuntarily admitted patients, a combination of poly drug use and schizophrenia was most frequent (47%. Substance abusing patients diagnosed with mental and behavioral disorders due to the use of psychoactive stimulant substances had a significantly higher risk of involuntary hospitalization (OR 2.3.Conclusion: Nearly one third of substance abusing patients are involuntarily admitted to mental hospitals, in particular stimulant drug use was associated with involuntarily admissions.

Clinician's perspectives of the relocation of a regional child and adolescent mental health service from co-located to stand alone premises.

Science.gov (United States)

Francis, K J; Boyd, C P; Sewell, J; Nurse, S

2008-01-01

Australia's National Mental Health Strategy's statement of rights and responsibilities states that children and adolescents admitted to a mental health facility or community program have the right to be separated from adult patients and provided with programs suited to their developmental needs. However, in rural Australia, where a lack of healthcare services, financial constraints, greater service delivery areas and fewer mental healthcare specialists represent the norm, Child and Adolescent Mental Health Services (CAMHS) are sometimes co-located with adult mental health services. The aim of the present study was to evaluate the impact of a recent relocation of a regional CAMHS in Victoria from co-located to stand alone premises. Six CAMHS clinicians who had experienced service delivery at a co-located setting and the current stand-alone CAMHS setting were interviewed about their perceptions of the impact of the relocation on service delivery. An exploratory interviewing methodology was utilized due to the lack of previous research in this area. Interview data were transcribed and analysed according to interpretative phenomenological analysis techniques. Findings indicated a perception that the relocation was positive for clients due to the family-friendly environment at the new setting and separation of CAMHS from adult psychiatric services. However, the impact of the relocation on clinicians was marked by a perceived loss of social capital from adult psychiatric service clinicians. These results provide increased understanding of the effects of service relocation and the influence of co-located versus stand-alone settings on mental health service delivery - an area where little prior research exists.

Digital microwave communication engineering point-to-point microwave systems

CERN Document Server

Kizer, George

2013-01-01

The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all en

PROGRAMMING THE MICROWAVE-OVEN

NARCIS (Netherlands)

KOK, LP; VISSER, PE; BOON, ME

1994-01-01

Microwaves can be used to stimulate chemical bonding, diffusion of reagents into and out of the specimen, and coagulation processes in preparatory techniques. Temperature plays an important role in these processes. There are several ways of controlling the temperature of microwave-exposed tissue,

Microwave Enhanced Reactive Distillation

NARCIS (Netherlands)

Altman, E.

2011-01-01

The application of electromagnetic irradiation in form of microwaves (MW) has gathered the attention of the scientific community in recent years. MW used as an alternative energy source for chemical syntheses (microwave chemistry) can provide clear advantages over conventional heating methods in

MICROWAVES IN ORGANIC SYNTHESIS

Science.gov (United States)

The effect of microwaves, a non-ionizing radiation, on organic reactions is described both in polar solvents and under solvent-free conditions. The special applications are highlighted in the context of solventless organic synthesis which involve microwave (MW) exposure of neat r...

Comparison of microwave hydrodistillation and solvent-free microwave extraction of essential oil from Melaleuca leucadendra Linn

Science.gov (United States)

Ismanto, A. W.; Kusuma, H. S.; Mahfud, M.

2017-12-01

The comparison of solvent-free microwave extraction (SFME) and microwave hydrodistillation (MHD) in the extraction of essential oil from Melaleuca leucadendra Linn. was examined. Dry cajuput leaves were used in this study. The purpose of this study is also to determine optimal condition (microwave power). The relative electric consumption of SFME and MHD methods are both showing 0,1627 kWh/g and 0,3279 kWh/g. The results showed that solvent-free microwave extraction methods able to reduce energy consumption and can be regarded as a green technique for extraction of cajuput oil.

Quantum teleportation of propagating quantum microwaves

Energy Technology Data Exchange (ETDEWEB)

Di Candia, R.; Felicetti, S.; Sanz, M. [University of the Basque Country UPV/EHU, Department of Physical Chemistry, Bilbao (Spain); Fedorov, K.G.; Menzel, E.P. [Bayerische Akademie der Wissenschaften, Walther-Meissner-Institut, Garching (Germany); Technische Universitaet Muenchen, Physik-Department, Garching (Germany); Zhong, L.; Deppe, F.; Gross, R. [Bayerische Akademie der Wissenschaften, Walther-Meissner-Institut, Garching (Germany); Technische Universitaet Muenchen, Physik-Department, Garching (Germany); Nanosystems Initiative Munich (NIM), Muenchen (Germany); Marx, A. [Bayerische Akademie der Wissenschaften, Walther-Meissner-Institut, Garching (Germany); Solano, E. [University of the Basque Country UPV/EHU, Department of Physical Chemistry, Bilbao (Spain); Basque Foundation for Science, IKERBASQUE, Bilbao (Spain)

2015-12-15

Propagating quantum microwaves have been proposed and successfully implemented to generate entanglement, thereby establishing a promising platform for the realisation of a quantum communication channel. However, the implementation of quantum teleportation with photons in the microwave regime is still absent. At the same time, recent developments in the field show that this key protocol could be feasible with current technology, which would pave the way to boost the field of microwave quantum communication. Here, we discuss the feasibility of a possible implementation of microwave quantum teleportation in a realistic scenario with losses. Furthermore, we propose how to implement quantum repeaters in the microwave regime without using photodetection, a key prerequisite to achieve long distance entanglement distribution. (orig.)

Quantum teleportation of propagating quantum microwaves

International Nuclear Information System (INIS)

Di Candia, R.; Felicetti, S.; Sanz, M.; Fedorov, K.G.; Menzel, E.P.; Zhong, L.; Deppe, F.; Gross, R.; Marx, A.; Solano, E.

2015-01-01

Propagating quantum microwaves have been proposed and successfully implemented to generate entanglement, thereby establishing a promising platform for the realisation of a quantum communication channel. However, the implementation of quantum teleportation with photons in the microwave regime is still absent. At the same time, recent developments in the field show that this key protocol could be feasible with current technology, which would pave the way to boost the field of microwave quantum communication. Here, we discuss the feasibility of a possible implementation of microwave quantum teleportation in a realistic scenario with losses. Furthermore, we propose how to implement quantum repeaters in the microwave regime without using photodetection, a key prerequisite to achieve long distance entanglement distribution. (orig.)

Public Housing Relocations and Relationships of Changes in Neighborhood Disadvantage and Transportation Access to Unmet Need for Medical Care.

Science.gov (United States)

Haley, Danielle F; Linton, Sabriya; Luo, Ruiyan; Hunter-Jones, Josalin; Adimora, Adaora A; Wingood, Gina M; Bonney, Loida; Ross, Zev; Cooper, Hannah L

2017-01-01

Cross-sectional research suggests that neighborhood characteristics and transportation access shape unmet need for medical care. This longitudinal analysis explores relationships of changes in neighborhood socioeconomic disadvantage and trans- portation access to unmet need for medical care. We analyzed seven waves of data from African American adults (N = 172) relocating from severely distressed public housing complexes in Atlanta, Georgia. Surveys yielded individual-level data and admin- istrative data characterized census tracts. We used hierarchical generalized linear models to explore relationships. Unmet need declined from 25% pre-relocation to 12% at Wave 7. Post-relocation reductions in neighborhood disadvantage were inversely associated with reductions in unmet need over time (OR = 0.71, 95% CI = 0.51-0.99). More frequent transportation barriers predicted unmet need (OR = 1.16, 95% CI = 1.02-1.31). These longitudinal findings support the importance of neighborhood environments and transportation access in shaping unmet need and suggest that improvements in these exposures reduce unmet need for medical care in this vulnerable population.

Freshwater mussel salvage and relocation at the Pond Eddy Bridge, Delaware River, New York and Pennsylvania

Science.gov (United States)

Galbraith, Heather S.; Blakeslee, Carrie J.; Cole, Jeffrey C.

2018-03-01

In a study conducted by the U.S. Geological Survey, in cooperation with the Pennsylvania Department of Transportation, freshwater mussels were salvaged and relocated from the anticipated zone of impact for the Pond Eddy Bridge construction project in New York and Pennsylvania. Five 25-meter (m) by 25-m cells along the Pennsylvania bank of the Delaware River were sampled in three generally straight-line passes by four surveyors wearing snorkel gear for a total of 180 survey minutes per cell. All mussels encountered were collected and identified to species. A subset of individuals was marked with shellfish tags, weighed, and measured prior to relocation upstream from the zone of impact. A total of 3,434 mussels, including 3,393 Elliptio complanata (eastern elliptio mussels), 39 Anodonta implicata (alewife floaters), 1 Strophitus undulatus (creeper), and 1 Pyganodon cataracta (eastern floater), were salvaged and relocated. All non-eastern elliptio species were georeferenced using a high-resolution global positioning system unit; a subset of tagged eastern elliptio was placed in transects between georeferenced points. These mussels will be monitored to assess the effects of translocation on mortality and body condition at 1 month, 1 year, and 2 years.

The microwave era is just beginning

International Nuclear Information System (INIS)

Grad, P.

1989-01-01

Microwave energy applicators in curing rubber products and in ceramic manufacture are enunciated by some of the participants at the First Australian Symposium on Microwave Power Applications held in February 1989 at Wollongong. The advantages and disadvantages of microwave heating over conventional methods are stated

Microwave power engineering generation, transmission, rectification

CERN Document Server

Okress, Ernest C

1968-01-01

Microwave Power Engineering, Volume 1: Generation, Transmission, Rectification considers the components, systems, and applications and the prevailing limitations of the microwave power technology. This book contains four chapters and begins with an introduction to the basic concept and developments of microwave power technology. The second chapter deals with the development of the main classes of high-power microwave and optical frequency power generators, such as magnetrons, crossed-field amplifiers, klystrons, beam plasma amplifiers, crossed-field noise sources, triodes, lasers. The third

Microwave-assisted organic and polymer chemistry

NARCIS (Netherlands)

Hoogenboom, R.; Schubert, U.S.

2009-01-01

The first ACS symposium on Microwave-Assisted Chemistry: Organic and Polymer Synthesis, held as part of the ACS National meeting in Philadelphia, in August 2008, aimed at various topics of the use of microwave irradiation. The symposium found that specific heating effects, such as higher microwave

Balanced microwave filters

CERN Document Server

Hong, Jiasheng; Medina, Francisco; Martiacuten, Ferran

2018-01-01

This book presents and discusses strategies for the design and implementation of common-mode suppressed balanced microwave filters, including, narrowband, wideband, and ultra-wideband filters This book examines differential-mode, or balanced, microwave filters by discussing several implementations of practical realizations of these passive components. Topics covered include selective mode suppression, designs based on distributed and semi-lumped approaches, multilayer technologies, defect ground structures, coupled resonators, metamaterials, interference techniques, and substrate integrated waveguides, among others. Divided into five parts, Balanced Microwave Filters begins with an introduction that presents the fundamentals of balanced lines, circuits, and networks. Part 2 covers balanced transmission lines with common-mode noise suppression, including several types of common-mode filters and the application of such filters to enhance common-mode suppression in balanced bandpass filters. Next, Part 3 exa...

Coupled microwave/photoassisted methods for environmental remediation.

Science.gov (United States)

Horikoshi, Satoshi; Serpone, Nick

2014-11-05

The microwave-induced acceleration of photocatalytic reactions was discovered serendipitously in the late 1990s. The activity of photocatalysts is enhanced significantly by both microwave radiation and UV light. Particularly relevant, other than as a heat source, was the enigmatic phenomenon of the non-thermal effect(s) of the microwave radiation that facilitated photocatalyzed reactions, as evidenced when examining various model contaminants in aqueous media. Results led to an examination of the possible mechanism(s) of the microwave effect(s). In the present article we contend that the microwaves' non-thermal effect(s) is an important factor in the enhancement of TiO2-photoassisted reactions involving the decomposition of organic pollutants in model wastewaters by an integrated (coupled) microwave-/UV-illumination method (UV/MW). Moreover, such coupling of no less than two irradiation methods led to the fabrication and ultimate investigation of microwave discharged electrodeless lamps (MDELs) as optimal light sources; their use is also described. The review focuses on the enhanced activity of photocatalytic reactions when subjected to microwave radiation and concentrates on the authors' research of the past few years.

Mechanism for microwave heating of 1-(4'-cyanophenyl)-4-propylcyclohexane characterized by in situ microwave irradiation NMR spectroscopy.

Science.gov (United States)

Tasei, Yugo; Yamakami, Takuya; Kawamura, Izuru; Fujito, Teruaki; Ushida, Kiminori; Sato, Motoyasu; Naito, Akira

2015-05-01

Microwave heating is widely used to accelerate organic reactions and enhance the activity of enzymes. However, the detailed molecular mechanism for the effect of microwave on chemical reactions is not yet fully understood. To investigate the effects of microwave heating on organic compounds, we have developed an in situ microwave irradiation NMR spectroscopy. (1)H NMR spectra of 1-(4'-cyanophenyl)-4-propylcyclohexane (PCH3) in the liquid crystalline and isotropic phases were observed under microwave irradiation. When the temperature was regulated at slightly higher than the phase transition temperature (Tc=45 °C) under a gas flow temperature control system, liquid crystalline phase mostly changed to the isotropic phase. Under microwave irradiation and with the gas flow temperature maintained at 20 °C, which is 25 °C below the Tc, the isotropic phase appeared stationary as an approximately 2% fraction in the liquid crystalline phase. The temperature of the liquid crystalline state was estimated to be 38 °C according to the line width, which is at least 7 °C lower than the Tc. The temperature of this isotropic phase should be higher than 45 °C, which is considered to be a non-equilibrium local heating state induced by microwave irradiation. Microwaves at a power of 195 W were irradiated to the isotropic phase of PCH3 at 50 °C and after 2 min, the temperature reached 220 °C. The temperature of PCH3 under microwave irradiation was estimated by measurement of the chemical shift changes of individual protons in the molecule. These results demonstrate that microwave heating generates very high temperature within a short time using an in situ microwave irradiation NMR spectrometer. Copyright © 2015 Elsevier Inc. All rights reserved.

From the SEM (IAEA) to the SIMS (ITU): Re-location experiment of μm-size particles - first results

International Nuclear Information System (INIS)

Admon, U.; Donohue, D.; Aigner, H.; Tamborini, G.; Bildstein, O.; Betti, M.

2002-01-01

Full text: Nuclear forensic analysis of individual radioactive particles in the μm-size range can be performed in two steps: in the first, an automated SEM screening of the loaded sample holder, particles of interest (POIs) are located and classified according to their elemental composition and size. In the second, the sample is transferred to a mass spectrometer (usually a SIMS), and individual POIs are re-located and further analyzed for their isotopic composition. Alternatively, selected POIs can be extracted after SEM screening or fission track analysis, and then analyzed in a TIMS or ICPMS. In the SIMS, which has imaging capability of its own, the whole sample is manipulated to bring specific POIs to the ion-beam point of impingement. In all these cases, including re-visiting POIs in the SEM itself, a precise relocation method is essential. The re-location of POIs in the SIMS after they have been identified as such in the SEM is based on the triangulation method. A set of reference marks are 'printed' by vacuum-deposition of metallic thin-film patterns on the sample holder, a flat-polished graphite planchet. These marks, easily recognizable and precisely measurable by both instruments, serve as inherent coordinate system for each sample. The SEM screening provides a list of POIs, each with a data profile comprising stage coordinates, composition, and size. Having measured the stage coordinates of at least 3 linearly-independent reference marks in the SEM and in the SIMS allows predicting the SIMS stage coordinates where the POIs can be found. This paper describes a joint IAEA-ITU experiment aimed at testing the feasibility of the relocation method in two separate laboratories. A flat-polished graphite planchet was loaded with a small number (a few hundreds) of μm-size uranium particles using the NIST method [3] in the ITU clean laboratory. The sample was sent to the IAEA clean laboratory, where the reference marks pattern was 'printed' by vacuum

75 FR 22805 - Federal Travel Regulation; Relocation Allowances; Standard Data Dictionary for Collection of...

Science.gov (United States)

2010-04-30

... GENERAL SERVICES ADMINISTRATION [Proposed GSA Bulletin FTR 10-XXX; Docket 2010-0009; Sequence 1] Federal Travel Regulation; Relocation Allowances; Standard Data Dictionary for Collection of Transaction... GSA is posting online a proposed FTR bulletin that contains the data dictionary that large Federal...

Tunable Multiband Microwave Photonic Filters

Directory of Open Access Journals (Sweden)

Mable P. Fok

2017-11-01

Full Text Available The increasing demand for multifunctional devices, the use of cognitive wireless technology to solve the frequency resource shortage problem, as well as the capabilities and operational flexibility necessary to meet ever-changing environment result in an urgent need of multiband wireless communications. Spectral filter is an essential part of any communication systems, and in the case of multiband wireless communications, tunable multiband RF filters are required for channel selection, noise/interference removal, and RF signal processing. Unfortunately, it is difficult for RF electronics to achieve both tunable and multiband spectral filtering. Recent advancements of microwave photonics have proven itself to be a promising candidate to solve various challenges in RF electronics including spectral filtering, however, the development of multiband microwave photonic filtering still faces lots of difficulties, due to the limited scalability and tunability of existing microwave photonic schemes. In this review paper, we first discuss the challenges that were facing by multiband microwave photonic filter, then we review recent techniques that have been developed to tackle the challenge and lead to promising developments of tunable microwave photonic multiband filters. The successful design and implementation of tunable microwave photonic multiband filter facilitate the vision of dynamic multiband wireless communications and radio frequency signal processing for commercial, defense, and civilian applications.

Are Gasoline Prices a Factor in Residential Relocation Decisions? Preliminary Findings from the American Housing Survey, 1996–2008

Science.gov (United States)

Chi, Guangqing; Boydstun, Jamie

2018-01-01

Residential relocation choice is affected by numerous factors, but gasoline prices as a potential factor have not been investigated. This study examines gasoline price changes and residential relocation choice using 1996–2008 American Housing Survey data. We found higher gasoline prices are associated with a higher percentage of movers choosing locations closer to workplaces. The findings have implications for addressing the impacts of volatile gasoline prices on land use planning and policies; resilient “smart cities or communities” are one possible solution. PMID:29658959

Modeling and prediction of extraction profile for microwave-assisted extraction based on absorbed microwave energy.

Science.gov (United States)

Chan, Chung-Hung; Yusoff, Rozita; Ngoh, Gek-Cheng

2013-09-01

A modeling technique based on absorbed microwave energy was proposed to model microwave-assisted extraction (MAE) of antioxidant compounds from cocoa (Theobroma cacao L.) leaves. By adapting suitable extraction model at the basis of microwave energy absorbed during extraction, the model can be developed to predict extraction profile of MAE at various microwave irradiation power (100-600 W) and solvent loading (100-300 ml). Verification with experimental data confirmed that the prediction was accurate in capturing the extraction profile of MAE (R-square value greater than 0.87). Besides, the predicted yields from the model showed good agreement with the experimental results with less than 10% deviation observed. Furthermore, suitable extraction times to ensure high extraction yield at various MAE conditions can be estimated based on absorbed microwave energy. The estimation is feasible as more than 85% of active compounds can be extracted when compared with the conventional extraction technique. Copyright © 2013 Elsevier Ltd. All rights reserved.

Microwave assisted centrifuge and related methods

Science.gov (United States)

Meikrantz, David H [Idaho Falls, ID

2010-08-17

Centrifuge samples may be exposed to microwave energy to heat the samples during centrifugation and to promote separation of the different components or constituents of the samples using a centrifuge device configured for generating microwave energy and directing the microwave energy at a sample located in the centrifuge.

Prospects of microwave processing: An overview

Indian Academy of Sciences (India)

Administrator

wave heating. In addition, microwave energy is being explored for the sintering of metal powders also. Ceramic and metal nanopowders have been sintered in microwave. Furthermore, initiatives have been taken to process the amorphous materials (e.g. glass) by microwave heating. Besides this, an attempt has been made ...

Understanding the microwave annealing of silicon

Directory of Open Access Journals (Sweden)

Chaochao Fu

2017-03-01

Full Text Available Though microwave annealing appears to be very appealing due to its unique features, lacking an in-depth understanding and accurate model hinder its application in semiconductor processing. In this paper, the physics-based model and accurate calculation for the microwave annealing of silicon are presented. Both thermal effects, including ohmic conduction loss and dielectric polarization loss, and non-thermal effects are thoroughly analyzed. We designed unique experiments to verify the mechanism and extract relevant parameters. We also explicitly illustrate the dynamic interaction processes of the microwave annealing of silicon. This work provides an in-depth understanding that can expedite the application of microwave annealing in semiconductor processing and open the door to implementing microwave annealing for future research and applications.

47 CFR 101.141 - Microwave modulation.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Microwave modulation. 101.141 Section 101.141... SERVICES Technical Standards § 101.141 Microwave modulation. (a) Microwave transmitters employing digital modulation techniques and operating below 25.25 GHz (except for MVDDS stations in the 12,200-12,700 MHz band...

Settlement Relocation Modeling: Reacting to Merapi’s Eruption Incident

Science.gov (United States)

Pramitasari, A.; Buchori, I.

2018-02-01

Merapi eruption has made severe damages in Central Java Province. Klaten was one of the most affected area, specifically in Balerante Village. This research is made to comprehend GIS model on finding alternative locations for impacted settlement in hazardous zones of eruption. The principal objective of the research study is to identify and analyze physical condition, community characteristics, and local government regulation related to settlements relocation plan for impacted area of eruption. The output is location map which classified into four categories, i.e. not available, available with low accessibility, available with medium accessibility, and available with high accessibility.

(Re)locating the gay Filipino: resistance, postcolonialism, and identity.

Science.gov (United States)

Manalansan, M F

1993-01-01

This paper attempts to critically analyze issues of postcolonial displacement, immigration, and homosexuality by examining the works of two Filipino gay immigrant writers, John Silva and Ralph Peña. Using postcolonial and critical theories, anthropological studies, and ethnographic fieldwork in New York City, this paper focuses on the role of language, memory, the body, race/ethnicity, and social class in the narrative strategies of the two writers. This paper argues that gay postcolonial writers such as these two relocate and reconfigure homosexual/gay identity in the face of new and oppressive hierarchies, identities, and practices.

Microwave-gamma ray water in crude monitor

International Nuclear Information System (INIS)

Paap, H.J.

1984-01-01

A microwave-gamma ray water-in-crude monitoring system measures the percent quantity of fresh water or salt water in crude oil flowing in a pipe line. The system includes a measuring cell arranged with the pipe line so that the crude oil flows through the measuring cell. A microwave transmitter subsystem and a gamma ray source are arranged with the measuring cell so that microwave energy and gamma rays are transmitted through the measuring cell. A microwave receiving subsystem and a gamma ray detector provide signals corresponding to received microwave energy and to the received gamma rays, respectively. Apparatus connected to the microwave receiver and to the gamma ray detector provides an indication of the percentage of water in the crude oil

Microwave heating in solid-phase peptide synthesis

DEFF Research Database (Denmark)

Pedersen, Søren Ljungberg; Shelton, Anne Pernille Tofteng; Malik, Leila

2012-01-01

synthesis, precise microwave irradiation to heat the reaction mixture during coupling and N(a)-deprotection has become increasingly popular. It has often provided dramatic reductions in synthesis times, accompanied by an increase in the crude peptide purity. Microwave heating has been proven especially...... relevant for sequences which might form ß-sheet type structures and for sterically difficult couplings. The beneficial effect of microwave heating appears so far to be due to the precise nature of this type of heating, rather than a peptide-specific microwave effect. However, microwave heating...... in microwave heating for peptide synthesis, with a focus on systematic studies and general protocols, as well as important applications. The assembly of ß-peptides, peptoids and pseudopeptides are also evaluated in this critical review (254 references)....

75 FR 42691 - Small Takes of Marine Mammals Incidental to Specified Activities; Exploratorium Relocation...

Science.gov (United States)

2010-07-22

... application from the Exploratorium, a nature, science, art and technology museum, requesting an IHA for the... (Eschrichtius robustus) incidental to relocation of the Exploratorium museum. Upon receipt of additional... function of current and device effectiveness (Caltrans, 2009). Therefore, distances to the Level A and...

Introduction to Microwave Linear [Accelerators

Energy Technology Data Exchange (ETDEWEB)

Whittum, David H

1999-01-04

The elements of microwave linear accelerators are introduced starting with the principles of acceleration and accelerating structures. Considerations for microwave structure modeling and design are developed from an elementary point of view. Basic elements of microwave electronics are described for application to the accelerator circuit and instrumentation. Concepts of beam physics are explored together with examples of common beamline instruments. Charged particle optics and lattice diagnostics are introduced. Considerations for fixed-target and colliding-beam experimentation are summarized.

DMSP SSM/I- Microwave Imager

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The SSM/I is a seven-channel, four frequency, linearly-polarized, passive microwave radiometric system which measures atmospheric, ocean and terrain microwave...

Comparison of carrot (Daucus carota drying in microwave and in vacuum microwave

Directory of Open Access Journals (Sweden)

R. Béttega

2014-06-01

Full Text Available Drying is a single operation employed to prolong the life of a large quantity of vegetables. Carrot (Daucus carota drying has been the subject of many studies. This plant has been highlighted in the human diet for having high nutritional value, mainly due to the high content of β-carotene. In this work, carrot drying behavior was studied in a regular microwave dryer and a vacuum microwave dryer. A vacuum of 450 mmHg was applied for drying of carrot in different geometrical shapes (cubes, discs and sticks. The samples were dried at power ratings of 1.0 W/g, 1.5 W/g and 2.0 W/g for both methods of drying. The evolution of physical properties such as density, volume and porosity was monitored and related to the moisture content of the sample and to the method of drying and power rating used. The geometric shape of the sample influenced the drying kinetics and it was verified that the cubic form was responsible for a slower drying. The application of vacuum showed no major changes in the drying kinetics in microwave but influenced the physical properties of the material. The influence of power ratings on the content of β-carotene was also evaluated and discussed. The main difference observed was the lower shrinkage of the samples dried in the vacuum microwave compared to those dried only in microwave.

Continuous microwave flow synthesis of mesoporous hydroxyapatite

International Nuclear Information System (INIS)

Akram, Muhammad; Alshemary, Ammar Z.; Goh, Yi-Fan; Wan Ibrahim, Wan Aini; Lintang, Hendrik O.; Hussain, Rafaqat

2015-01-01

We have successfully used continuous microwave flow synthesis (CMFS) technique for the template free synthesis of mesoporous hydroxyapatite. The continuous microwave flow reactor consisted of a modified 2.45 GHz household microwave, peristaltic pumps and a Teflon coil. This cost effective and efficient system was exploited to produce semi-crystalline phase pure nano-sized hydroxyapatite. Effect of microwave power, retention time and the concentration of reactants on the phase purity, degree of crystallinity and surface area of the final product was studied in detail. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to study the phase purity and composition of the product, while transmission electron microscopy (TEM) was used to study the effect of process parameters on the morphology of hydroxyapatite. The TEM analysis confirmed the formation of spherical particles at low microwave power; however the morphology of the particles changed to mesoporous needle and rod-like structure upon exposing the reaction mixture to higher microwave power and longer retention time inside the microwave. The in-vitro ion dissolution behavior of the as synthesized hydroxyapatite was studied by determining the amount of Ca 2+ ion released in SBF solution. - Highlights: • Continuous microwave flow synthesis method was used to prepare hydroxyapatite. • Increase in microwave power enhanced the degree of crystallinity. • TEM images confirmed the presence of mesopores on the surface of HA

Continuous microwave flow synthesis of mesoporous hydroxyapatite

Energy Technology Data Exchange (ETDEWEB)

Akram, Muhammad; Alshemary, Ammar Z.; Goh, Yi-Fan; Wan Ibrahim, Wan Aini [Department of Chemistry, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Lintang, Hendrik O. [Centre for Sustainable Nanomaterials (CSNano), Ibnu Sina Institute for Scientific and Industrial Research, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Hussain, Rafaqat, E-mail: rafaqat@kimia.fs.utm.my [Centre for Sustainable Nanomaterials (CSNano), Ibnu Sina Institute for Scientific and Industrial Research, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia)

2015-11-01

We have successfully used continuous microwave flow synthesis (CMFS) technique for the template free synthesis of mesoporous hydroxyapatite. The continuous microwave flow reactor consisted of a modified 2.45 GHz household microwave, peristaltic pumps and a Teflon coil. This cost effective and efficient system was exploited to produce semi-crystalline phase pure nano-sized hydroxyapatite. Effect of microwave power, retention time and the concentration of reactants on the phase purity, degree of crystallinity and surface area of the final product was studied in detail. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to study the phase purity and composition of the product, while transmission electron microscopy (TEM) was used to study the effect of process parameters on the morphology of hydroxyapatite. The TEM analysis confirmed the formation of spherical particles at low microwave power; however the morphology of the particles changed to mesoporous needle and rod-like structure upon exposing the reaction mixture to higher microwave power and longer retention time inside the microwave. The in-vitro ion dissolution behavior of the as synthesized hydroxyapatite was studied by determining the amount of Ca{sup 2+} ion released in SBF solution. - Highlights: • Continuous microwave flow synthesis method was used to prepare hydroxyapatite. • Increase in microwave power enhanced the degree of crystallinity. • TEM images confirmed the presence of mesopores on the surface of HA.

Integrated Microwave Photonics

OpenAIRE

Marpaung, David; Roeloffzen, Chris; Heideman, René; Leinse, Arne; Sales Maicas, Salvador; Capmany Francoy, José

2013-01-01

Microwave photonics (MWP) is an emerging field in which radio frequency (RF) signals are generated, distributed, processed and analyzed using the strength of photonic techniques. It is a technology that enables various functionalities which are not feasible to achieve only in the microwave domain. A particular aspect that recently gains significant interests is the use of photonic integrated circuit (PIC) technology in the MWP field for enhanced functionalities and robustness as well as the r...

Characterization of a microwave generated plasma

International Nuclear Information System (INIS)

Root, D.J.; Mahoney, L.; Asmussen, J.

1986-01-01

Recent experiments have demonstrated a microwave ion beam source without and with static magnetic fields in inert gases and in oxygen gases. This plasma generation configuration also has uses in the areas of plasma processing such as plasma etching, plasma assisted thin flim deposition and plasma assisted oxide growth. These ion beam and plasma processing applications have provided motivation to investigate microwave discharge properties, such as electron density, electron temperature, gas temperature, degree of ionization, etc., of the microwave generated plasma over a wide range of experimental operating conditions. This paper presents the results of experimental measurements which attempt to characterize the experimental microwave discharge in the absence of a static magnetic field. Measurements from a double probe, which is located in the plasma in a zero microwave field region, are presented in argon, xenon and oxygen gases. Variations of plasma density and electron temperature versus absorbed microwave power, gas pressure (0.2 m Torr to 200 m Torr) and discharge diffusion length are presented and compared to dc positive column discharge theory

Microwave effects in Drosophila melanogaster

International Nuclear Information System (INIS)

Dardalhon, M.; Averbeck, D.; Berteaud, A.J.

1979-01-01

Experiments were set up to investigate the effects of open space microwave irradiation of the millimeter (73 GHz) and the centimeter (17 GHz) range in Drosophila melanogaster. We used the wild type strain Paris and the strain delta carrying melanitic tumors in the 3rd larval stage, in the pupae and the adults. The power densities were up to 100mW.cm -2 for 73 GHz and about 60 mW.cm -2 for microwaves at 17 GHz. After 2h exposure to microwaves of 17 GHz or 73 GHz the hatching of the irradiated eggs and their development were normal. In a few cases there was a tendency towards a diminution of the survival of eggs treated at different stages, of larvae treated in the stages 1, 2 and 3 and of treated pupae. However, this was not always statistically significant. The microwave treatment did not induce teratological changes in the adults. A statistical analysis brought about slight diminutions in the incidence and multiplicity of tumors in adult flies. When wild type females were exposed to microwaves of 17 GHz for 16 or 21 h and crossed with untreated males we observed a marked increase in fertility as compared to untreated samples. The viability and tumor incidence in the offspring was not affected. Similar results were obtained when microwaves treated males were crossed with untreated females

Ceramic matrix composites by microwave assisted CVI

International Nuclear Information System (INIS)

Currier, R.P.; Devlin, D.J.

1993-01-01

Chemical vapor infiltration (CVI) processes for producing continuously reinforced ceramic composites are reviewed. Potential advantages of microwave assisted CVI are noted and numerical studies of microwave assisted CVI are reviewed. The models predict inverted thermal gradients in fibrous ceramic preforms subjected to microwave radiation and suggest processing strategies for achieving uniformly dense composites. Comparisons are made to experimental results on silicon-based composite systems. The role played by the relative ability of fiber and matrix to dissipate microwave energy is noted. Results suggest that microwave induced inverted gradients can be exploited to promote inside-out densification. 10 refs., 2 figs

Adhesive bonding using variable frequency microwave energy

Science.gov (United States)

Lauf, Robert J.; McMillan, April D.; Paulauskas, Felix L.; Fathi, Zakaryae; Wei, Jianghua

1998-01-01

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy.

Stress drop estimates and hypocenter relocations of induced earthquakes near Fox Creek, Alberta

Science.gov (United States)

Clerc, F.; Harrington, R. M.; Liu, Y.; Gu, Y. J.

2016-12-01

This study investigates the physical differences between induced and naturally occurring earthquakes using a sequence of events potentially induced by hydraulic fracturing near Fox Creek, Alberta. We perform precise estimations of static stress drop to determine if the range of values is low compared to values estimated for naturally occurring events, as has been suggested by previous studies. Starting with the Natural Resources Canada earthquake catalog and using waveform data from regional networks, we use a spectral ratio method to calculate the static stress drop values of a group of relocated earthquakes occurring in close proximity to hydraulic fracturing wells from December 2013 to June 2015. The spectral ratio method allows us to precisely constrain the corner frequencies of the amplitude spectra by eliminating the path and site effects of co-located event pairs. Our estimated stress drop values range from 0.1 - 149 MPa over the full range of observed magnitudes, Mw 1.5-4, which are on the high side of the typical reported range of tectonic events, but consistent with other regional studies [Zhang et al., 2016; Wang et al., 2016]. , Stress drops values range from 11 to 93 MPa and appear to be scale invariant over the magnitude range Mw 3 - 4, and are less well constrained at lower magnitudes due to noise and bandwidth limitations. We observe no correlation between event stress drop and hypocenter depth or distance from the wells. Relocated hypocenters cluster around corresponding injection wells and form fine-scale lineations, suggesting the presence and orientation of fault planes. We conclude that neither the range of stress drops nor their scaling with respect to magnitude can be used to conclusively discriminate induced and tectonic earthquakes, as stress drop values may be greatly affected by the regional setting. Instead, the double-difference relocations may be a more reliable indicator of induced seismicity.

76 FR 1096 - Pay Under the General Schedule and Recruitment, Relocation, and Retention Incentives

Science.gov (United States)

2011-01-07

... RIN 3206-AM13 Pay Under the General Schedule and Recruitment, Relocation, and Retention Incentives... instructions for submitting comments. Mail: Jerome D. Mikowicz, Deputy Associate Director, Pay and Leave...-0824; or by e-mail at pay[email protected] . SUPPLEMENTARY INFORMATION: The U.S. Office of...

Characteristics of Relocated Quiet Zones Using Virtual Microphone Algorithm in an Active Headrest System

Directory of Open Access Journals (Sweden)

Seokhoon Ryu

2016-01-01

Full Text Available This study displays theoretical and experimental investigation on the characteristics of the relocated zone of quiet by a virtual microphone (VM based filtered-x LMS (FxLMS algorithm which can be embedded in a real-time digital controller for an active headrest system. The attenuation changes at the relocated zones of quiet by the variation of the distance between the ear and the error microphone are mainly examined. An active headrest system was implemented for the control experiment at a chair and consists of two (left and right secondary loudspeakers, two error microphones, two observer microphones at ear positions in a HATS, and other electronics including a dSPACE 1401 controller. The VM based FxLMS algorithm achieved an attenuation of about 22 dB in the control experiment against a narrowband primary noise by the variation of the distance between the ear and the error microphone. The important factors for the algorithm are discussed as well.

FUMAC-a new model for light water reactor fuel relocation and pellet-cladding interaction

International Nuclear Information System (INIS)

Walton, L.A.; Matheson, J.E.

1984-01-01

An improved approach to the mechanical modeling of fuel rod performance is presented. Previous computer modeling has centered around a unified finite element approach with both fuel pellets and cladding being represented by ring elements. The fuel mechanical analysis code (FUMAC) departs from these approaches in two areas. The pellet model is an empirically based deterministic algorithm, while the cladding model uses both plane stress and plane strain finite elements. The work describes a semiempirical fuel cracking and fragment relocation model, which is burnup and power-level dependent. The interaction of the pellet with the cladding is treated classically. The resulting thick cylinder stresses are used in conjunction with an orthotropic creep model to predict cladding ridging. The resulting ridging compares well with experimental data for both steady-state and transient operating conditions. Future work planned includes the integration of the finite element cladding model with the pellet model and refinement of the pellet relocation and thermal models. Transient performance predictions will be emphasized

MEB 2013, Regulation for Administrator Assignment and Relocation Based On the Opinions of Administrators

Directory of Open Access Journals (Sweden)

Soner DOĞAN

2014-04-01

Full Text Available In this study; it is aimed to determine the opinions of the institution managers concerning the Regulation for Administrator Assignment and Relocation dated February 28, 2013, the scoring criteria in the regulation and the disturbances experienced in the application process of the regulation. The study is carried out in accordance with the phenomenological pattern through qualitative research methods. The participants were determined with the criterion sampling method which is one of the purposeful sampling methods. The study group of the research is composed of the eight managers serving in a province. In the study, a semi-structured interview form was used as data collection tool. In the interpretation process of the interviews, the inductive descriptive analysis, the content analysis and the constant comparison technique were used. Three main themes have come out regarding the result of the data analysis process of assigning the administrators, the combining of the different types of institutions and the application of the forced relocation.

Microwave oscillator with 'whispering gallery' resonator

International Nuclear Information System (INIS)

Kirichenko, A.Ya.; Prokopenko, Yu.V.; Filippov, Yu.F.; Lonin, Yu.F.; Papkovich, V.G.; Ponomarev, A.G.; Prokopenko, Yu.V.; Uvarov, V.T.

2010-01-01

It was presented researches of a generation of microwave radiation into system with azimuthally periodical relativistic electron beam current that excites a high-Q quasi-optical dielectric resonator. The Eigen parameters of cylindrical Teflon resonator were determined by numerical computation. Registration of the microwave radiation realizes by a crystal set of 8-mm wavelength range. Research projects of microwave oscillators with high-Q resonators, in which 'whispering gallery' oscillations are excited by an electron flow, are presented. Multiresonator oscillators ideology is based on principles of microwave generation in klystrons with both subcritical and supercritical electron beams currents.

Computer-Generated Microwave Holograms.

Science.gov (United States)

Leming, Charles W.; Hastings, Orestes Patterson, III

1980-01-01

Described is the phasor method of superposition of waves. The intensity pattern from a system of microwave sources is calculated point by point on a plane corresponding to a film emulsion, and then printed and directly converted to a hologram for 3-cm microwaves. Calculations, construction, and viewing of holograms are included. (Author/DS)

MARTINS: A foam/film flow model for molten material relocation in HWRs with U-Al-fueled multi-tube assemblies

International Nuclear Information System (INIS)

Kalimullah.

1994-01-01

Some special purpose heavy-water reactors (EM) are made of assemblies consisting of a number of coaxial aluminum-clad U-Al alloy fuel tubes and an outer Al sleeve surrounding the fuel tubes. The heavy water coolant flows in the annular gaps between the circular tubes. Analysis of severe accidents in such reactors requires a model for predicting the behavior of the fuel tubes as they melt and disrupt. This paper describes a detailed, mechanistic model for fuel tube heatup, melting, freezing, and molten material relocation, called MARTINS (Melting and Relocation of Tubes in Nuclear subassembly). The paper presents the modeling of the phenomena in MARTINS, and an application of the model to analysis of a reactivity insertion accident. Some models are being developed to compute gradual downward relocation of molten material at decay-heat power levels via candling along intact tubes, neglecting coolant vapor hydrodynamic forces on molten material. These models are inadequate for high power accident sequences involving significant hydrodynamic forces. These forces are included in MARTINS

Pyrolysis of methane by microwaves. Pt. 1

International Nuclear Information System (INIS)

Avni, R.; Winefordner, J.D.; Nickel, H.

1975-04-01

The pyrolysis of methane and mixtures of argon-methane by microwaves (2,450 MHz) was investigated. The microwave plasma diagnostic study was performed using electrical probes, namely, the double floating probe technique. Parameters such as electric field strength and current densities were measured and from their relationship the electron temperature, electric conductivity, electron and ion densities were evaluated as function of gas pressure, microwave power input and distance of the probe from the microwave cavity. Various spectroscopic techniques were used for the measurement of temperatures in the microwave plasma; the 'reversal temperature' by measuring the intensities of the electronic vibrational bands of CN and OH molecules and 'rotational temperature' from the measured intensities of rotational OH lines. The 'rotational' as well as the 'reversal temperature' were found to be identical and this temperature was assumed to be the temperature of the gas in the microwave plasma. Energy balance calculation, based upon the electrical energy input and thermal losses, were performed in order to determine if steady state conditions existed in the microwave plasma. Emission and absorption spectroscopy were used for determining the active species formed in the pyrolysis of methane and also of mixtures of CH 4 -Ar, by the microwave plasma. (orig.) [de

Binding of TFIIIC to sine elements controls the relocation of activity-dependent neuronal genes to transcription factories.

Directory of Open Access Journals (Sweden)

Luca Crepaldi

Full Text Available In neurons, the timely and accurate expression of genes in response to synaptic activity relies on the interplay between epigenetic modifications of histones, recruitment of regulatory proteins to chromatin and changes to nuclear structure. To identify genes and regulatory elements responsive to synaptic activation in vivo, we performed a genome-wide ChIPseq analysis of acetylated histone H3 using somatosensory cortex of mice exposed to novel enriched environmental (NEE conditions. We discovered that Short Interspersed Elements (SINEs located distal to promoters of activity-dependent genes became acetylated following exposure to NEE and were bound by the general transcription factor TFIIIC. Importantly, under depolarizing conditions, inducible genes relocated to transcription factories (TFs, and this event was controlled by TFIIIC. Silencing of the TFIIIC subunit Gtf3c5 in non-stimulated neurons induced uncontrolled relocation to TFs and transcription of activity-dependent genes. Remarkably, in cortical neurons, silencing of Gtf3c5 mimicked the effects of chronic depolarization, inducing a dramatic increase of both dendritic length and branching. These findings reveal a novel and essential regulatory function of both SINEs and TFIIIC in mediating gene relocation and transcription. They also suggest that TFIIIC may regulate the rearrangement of nuclear architecture, allowing the coordinated expression of activity-dependent neuronal genes.

Binding of TFIIIC to sine elements controls the relocation of activity-dependent neuronal genes to transcription factories.

Science.gov (United States)

Crepaldi, Luca; Policarpi, Cristina; Coatti, Alessandro; Sherlock, William T; Jongbloets, Bart C; Down, Thomas A; Riccio, Antonella

2013-01-01

In neurons, the timely and accurate expression of genes in response to synaptic activity relies on the interplay between epigenetic modifications of histones, recruitment of regulatory proteins to chromatin and changes to nuclear structure. To identify genes and regulatory elements responsive to synaptic activation in vivo, we performed a genome-wide ChIPseq analysis of acetylated histone H3 using somatosensory cortex of mice exposed to novel enriched environmental (NEE) conditions. We discovered that Short Interspersed Elements (SINEs) located distal to promoters of activity-dependent genes became acetylated following exposure to NEE and were bound by the general transcription factor TFIIIC. Importantly, under depolarizing conditions, inducible genes relocated to transcription factories (TFs), and this event was controlled by TFIIIC. Silencing of the TFIIIC subunit Gtf3c5 in non-stimulated neurons induced uncontrolled relocation to TFs and transcription of activity-dependent genes. Remarkably, in cortical neurons, silencing of Gtf3c5 mimicked the effects of chronic depolarization, inducing a dramatic increase of both dendritic length and branching. These findings reveal a novel and essential regulatory function of both SINEs and TFIIIC in mediating gene relocation and transcription. They also suggest that TFIIIC may regulate the rearrangement of nuclear architecture, allowing the coordinated expression of activity-dependent neuronal genes.

MICROWAVE TECHNOLOGY CHEMICAL SYNTHESIS APPLICATIONS

Science.gov (United States)

Microwave-accelerated chemical syntheses in various solvents as well as under solvent-free conditions have witnessed an explosive growth. The technique has found widespread application predominantly exploiting the inexpensive unmodified household microwave (MW) ovens although th...

Microwave energy transmission system for solar power station

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, Hiroshi

1988-05-05

This paper deals with a microwave wireless energy transmission system which will be required for a solar power station under investigation, particularly, it describes its foundation and future investigation. It is supposed that for realization of microwave wireless transmission techniques, it is most important to investigate the effect of strong microwave beams on a plasma environment, establish control techniques for microwave beams in which a retro-directive system is combined with a computer control system, and develop a semiconductor transmission module. Institute of Space and Astronautical Science (Japan) made an experiment on the effect of microwaves on ionospheric plasma by using an observatory rocket. The institute has planned to make an experiment on a microwave energy transmission system which is to be mounted to a small-scale space flyer unit in order to examine the control of microwave beams and 10 KW power transmission, in addition to investigation on the interaction of microwave energy beams with a plasma environment. (4 figs, 3 tabs, 20 refs)

The scientific base of heating water by microwave

Energy Technology Data Exchange (ETDEWEB)

Akdoğan, Ender, E-mail: ender.akdogan@tpe.gov.tr [Department of Physics Engineering, Ankara University, Dögol St. Tandoğan Ankara 06560 Türkiye (Turkey); Çiftçi, Muharrem, E-mail: muharrem-ciftci@windowslive.com [Author" 1 Department of Physics, Ankara University, Dögol St. Tandoğan Ankara 06560 Türkiye (Turkey)

2016-03-25

This article is based on the master thesis [4] related to our invention which was published in World Intellectual Property Organization (WO/2011/048506) as a microwave water heater. In the project, a prototype was produced to use microwave in industrial heating. In order to produce the prototype, the most appropriate material kind for microwave-water experiments was determined by a new energy loss rate calculation technique. This new energy loss calculation is a determinative factor for material permeability at microwave frequency band (1-100 GHz). This experimental series aim to investigate the rationality of using microwave in heating industry. Theoretically, heating water by microwave (with steady frequency 2.45 GHz) is analyzed from sub-molecular to Classical Mechanic results of heating. In the study, we examined Quantum Mechanical base of heating water by microwave experiments. As a result, we derived a Semi-Quantum Mechanical equation for microwave-water interactions and thus, Wien displacement law can be derived to verify experimental observations by this equation.

Microwave plasmatrons for giant integrated circuit processing

Energy Technology Data Exchange (ETDEWEB)

Petrin, A.B.

2000-02-01

A method for calculating the interaction of a powerful microwave with a plane layer of magnetoactive low-pressure plasma under conditions of electron cyclotron resonance is presented. In this paper, the plasma layer is situated between a plane dielectric layer and a plane metal screen. The calculation model contains the microwave energy balance, particle balance, and electron energy balance. The equation that expressed microwave properties of nonuniform magnetoactive plasma is found. The numerical calculations of the microwave-plasma interaction for a one-dimensional model of the problem are considered. Applications of the results for microwave plasmatrons designed for processing giant integrated circuits are suggested.

Recent Advancements in Microwave Imaging Plasma Diagnostics

International Nuclear Information System (INIS)

Park, H.; Chang, C.C.; Deng, B.H.; Domier, C.W.; Donni, A.J.H.; Kawahata, K.; Liang, C.; Liang, X.P.; Lu, H.J.; Luhmann, N.C. Jr.; Mase, A.; Matsuura, H.; Mazzucato, E.; Miura, A.; Mizuno, K.; Munsat, T.; Nagayama, K.; Nagayama, Y.; Pol, M.J. van de; Wang, J.; Xia, Z.G.; Zhang, W-K.

2002-01-01

Significant advances in microwave and millimeter wave technology over the past decade have enabled the development of a new generation of imaging diagnostics for current and envisioned magnetic fusion devices. Prominent among these are revolutionary microwave electron cyclotron emission imaging (ECEI), microwave phase imaging interferometers, imaging microwave scattering and microwave imaging reflectometer (MIR) systems for imaging electron temperature and electron density fluctuations (both turbulent and coherent) and profiles (including transport barriers) on toroidal devices such as tokamaks, spherical tori, and stellarators. The diagnostic technology is reviewed, and typical diagnostic systems are analyzed. Representative experimental results obtained with these novel diagnostic systems are also presented

Molten material relocation into the lower plenum: a status report

International Nuclear Information System (INIS)

1998-09-01

This report, prepared by the task group 'Degraded Core Cooling' (DCC) for the CSNI, summarizes the experimental and theoretical knowledge of molten material relocation from a degraded core to the lower plenum of the reactor vessel under the main severe accident scenarios envisaged for both PWRs and BWRs, and boundary conditions. Consequences of movement of material to the lower head are considered with respect to the potential for reactor pressure vessel failure. The following models are reviewed: SCDAP/RELAP5, ICARE/CATHARE, ATHLET-CD/KESS, MELCOR, MAAP4, ESCADRE, etc.

Microwave mixer technology and applications

CERN Document Server

Henderson, Bert

2013-01-01

Although microwave mixers play a critical role in wireless communication and other microwave applications employing frequency conversion circuits, engineers find that most books on this subject emphasize theoretical aspects, rather than practical applications. That's about to change with the forthcoming release of Microwave Mixer Technology and Applications. Based on a review of over one thousand patents on mixers and frequency conversion, authors Bert Henderson and Edmar Camargo have written a comprehensive book for mixer designers who want solid ideas for solving their own design challenges.

Aspects of microwave-heating uniformity

International Nuclear Information System (INIS)

Ginsberg, T.; Makowitz, H.

1983-01-01

Interest has been shown in the field of nuclear reactor safety in the use of microwave heating to simulate the nuclear heat source. The objective of the investigation reported here was to evaluate the usefulness of microwave dielectric heating as a simulator of the nuclear heat source in experiments which simulate the process of boiling of molten mixtures of nuclear fuel and steel. This paper summarizes the results of studies of several aspects of energy deposition in dielectric liquid samples which are exposed to microwave radiation

Microwave off-gas treatment apparatus and process

Science.gov (United States)

Schulz, Rebecca L.; Clark, David E.; Wicks, George G.

2003-01-01

The invention discloses a microwave off-gas system in which microwave energy is used to treat gaseous waste. A treatment chamber is used to remediate off-gases from an emission source by passing the off-gases through a susceptor matrix, the matrix being exposed to microwave radiation. The microwave radiation and elevated temperatures within the combustion chamber provide for significant reductions in the qualitative and quantitative emissions of the gas waste stream.

Investigation of dielectric properties of different cake formulations during microwave and infrared-microwave combination baking.

Science.gov (United States)

Sakiyan, Ozge; Sumnu, Gulum; Sahin, Serpil; Meda, Venkatesh

2007-05-01

Dielectric properties can be used to understand the behavior of food materials during microwave processing. Dielectric properties influence the level of interaction between food and high frequency electromagnetic energy. Dielectric properties are, therefore, important in the design of foods intended for microwave preparation. In this study, it was aimed to determine the variation of dielectric properties of different cake formulations during baking in microwave and infrared-microwave combination oven. In addition, the effects of formulation and temperature on dielectric properties of cake batter were examined. Dielectric constant and loss factor of cake samples were shown to be dependent on formulation, baking time, and temperature. The increase in baking time and temperature decreased dielectric constant and loss factor of all formulations. Fat content was shown to increase dielectric constant and loss factor of cakes.

The research and test of microwave preventer web

International Nuclear Information System (INIS)

Tao Songlei; Li Weicai; Ye Jian; Hong Tao; Tao Junbing

2003-01-01

To deal with the microwave's harm to the organism, a division-layer composed of several kinds of materials is set between the source of microwave and the protected target. By the use of the division-layer, the power density of field intensity of microwave will come up to a safe amount. The article puts forward a new microwave preventer for mobile telephone. Experiments show that the radiation power density nearby human brain can be reduced to 5 μW/cm 2 and below by using mobile telephone microwave preventer, which is in compliance with the state health standard for microwave radiation from the mobile phone

Photonics-Based Microwave Image-Reject Mixer

Directory of Open Access Journals (Sweden)

Dan Zhu

2018-03-01

Full Text Available Recent developments in photonics-based microwave image-reject mixers (IRMs are reviewed with an emphasis on the pre-filtering method, which applies an optical or electrical filter to remove the undesired image, and the phase cancellation method, which is realized by introducing an additional phase to the converted image and cancelling it through coherent combination without phase shift. Applications of photonics-based microwave IRM in electronic warfare, radar systems and satellite payloads are described. The inherent challenges of implementing photonics-based microwave IRM to meet specific requirements of the radio frequency (RF system are discussed. Developmental trends of the photonics-based microwave IRM are also discussed.

EDITORIAL: Microwave Moisture Measurements

Science.gov (United States)

Kaatze, Udo; Kupfer, Klaus; Hübner, Christof

2007-04-01

Microwave moisture measurements refer to a methodology by which the water content of materials is non-invasively determined using electromagnetic fields of radio and microwave frequencies. Being the omnipresent liquid on our planet, water occurs as a component in most materials and often exercises a significant influence on their properties. Precise measurements of the water content are thus extremely useful in pure sciences, particularly in biochemistry and biophysics. They are likewise important in many agricultural, technical and industrial fields. Applications are broad and diverse, and include the quality assessment of foodstuffs, the determination of water content in paper, cardboard and textile production, the monitoring of moisture in sands, gravels, soils and constructions, as well as the measurement of water admixtures to coal and crude oil in reservoirs and in pipelines. Microwave moisture measurements and evaluations require insights in various disciplines, such as materials science, dielectrics, the physical chemistry of water, electrodynamics and microwave techniques. The cooperation of experts from the different fields of science is thus necessary for the efficient development of this complex discipline. In order to advance cooperation the Workshop on Electromagnetic Wave Interaction with Water and Moist Substances was held in 1993 in Atlanta. It initiated a series of international conferences, of which the last one was held in 2005 in Weimar. The meeting brought together 130 scientists and engineers from all over the world. This special issue presents a collection of some selected papers that were given at the event. The papers cover most topics of the conference, featuring dielectric properties of aqueous materials, electromagnetic wave interactions, measurement methods and sensors, and various applications. The special issue is dedicated to Dr Andrzej W Kraszewski, who died in July 2006 after a distinguished career of 48 years in the research of

Microwave SQUID Multiplexer Demonstration for Cosmic Microwave Background Imagers.

Science.gov (United States)

Dober, B; Becker, D T; Bennett, D A; Bryan, S A; Duff, S M; Gard, J D; Hays-Wehle, J P; Hilton, G C; Hubmayr, J; Mates, J A B; Reintsema, C D; Vale, L R; Ullom, J N

2017-12-01

Key performance characteristics are demonstrated for the microwave SQUID multiplexer (µmux) coupled to transition edge sensor (TES) bolometers that have been optimized for cosmic microwave background (CMB) observations. In a 64-channel demonstration, we show that the µmux produces a white, input referred current noise level of [Formula: see text] at -77 dB microwave probe tone power, which is well below expected fundamental detector and photon noise sources for a ground-based CMB-optimized bolometer. Operated with negligible photon loading, we measure [Formula: see text] in the TES-coupled channels biased at 65% of the sensor normal resistance. This noise level is consistent with that predicted from bolometer thermal fluctuation (i.e. phonon) noise. Furthermore, the power spectral density is white over a range of frequencies down to ~ 100 mHz, which enables CMB mapping on large angular scales that constrain the physics of inflation. Additionally, we report cross-talk measurements that indicate a level below 0.3%, which is less than the level of cross-talk from multiplexed readout systems in deployed CMB imagers. These measurements demonstrate the µmux as a viable readout technique for future CMB imaging instruments.

Microwave and pulsed power engineering

International Nuclear Information System (INIS)

Hofer, W.W.

1984-01-01

The Microwave and Pulsed Power Engineering Thrust Area is responsible for developing the short-term and long-term engineering resources required to support the growing microwave and pulsed power engineering requirements of several LLNL Programs. The responsibility of this Thrust Area is to initiate applicable research and development projects and to provide capabilities and facilities to permit engineers involved in these and other programs to make significant contributions. In this section, the principal projects are described: dielectric failure prediction using partial discharge analysis, coating dielectrics to increase surface flashover potential, and the microwave generator experiment

75 FR 24434 - Federal Travel Regulation (FTR); Transportation in Conjunction With Official Travel and Relocation

Science.gov (United States)

2010-05-05

...-0010, sequence 1] RIN 3090-AJ02 Federal Travel Regulation (FTR); Transportation in Conjunction With Official Travel and Relocation AGENCY: Office of Governmentwide Policy, General Services Administration (GSA). ACTION: Final rule. SUMMARY: This final rule amends the Federal Travel Regulation (FTR), by...

Actual problems of management of territory and natural objects in the zone of population relocation at the Chernobyl' NPP

International Nuclear Information System (INIS)

Arkhipov, N.P.; Meshalkin, G.S.; Arkhipov, A.N.; Burov, N.I.; Mishenkov, N.N.; Fedotov, I.S.; Tursukova, T.A.; Kulikov, V.V.; Loginova, L.S.

1989-01-01

Basing on experimental data and using the research results and estimates of other authors an attempt is made to argue and formulate the principles of management for natural and agricultural lands, which can form the basis for development of the conception for use of the population relocation zone. The list of the first-priority works dealing with the problem of rational management of the zone natural objects is given. The necessity of development of the basis for organization of radioecologic nature, reserve, is shown. The scheme of organization of territory use in the population relocation zone is given. 2 figs.; 1 tab

Photoinduced spin polarization and microwave technology

International Nuclear Information System (INIS)

Antipov, Sergey; Poluektov, Oleg; Schoessow, Paul; Kanareykin, Alexei; Jing, Chunguang

2013-01-01

We report here on studies of optically pumped active microwave media based on various fullerene derivatives, with an emphasis on the use of these materials in microwave electronics. We have investigated a class of optically excited paramagnetic materials that demonstrate activity in the X-band as candidate materials. We found that a particular fullerene derivative, Phenyl-C 61 -butyric acid methyl ester (PCBM), produced the largest electron paramagnetic resonance (EPR) emission signal compared to other organic compounds that have been suggested for use as microwave active materials. We also studied the effects of concentration, temperature, solvent etc. on the activity of the material. In these experiments, EPR studies using a commercial spectrometer were followed up by measurements of an RF signal reflected from a resonator loaded with the PCBM-based material. The activity was directly demonstrated through the change in the quality factor and RF coupling between the resonator and waveguide feed. At the inception of these experiments the primary interest was the development of a microwave PASER. The PASER (particle acceleration by stimulated emission of radiation [1]) is a novel acceleration concept that is based on the direct energy transfer from an active medium to a charged particle beam. While the previous work on the PASER has emphasized operations at infrared or visible wavelengths, operating in the microwave regime has significant advantages in terms of the less stringent quality requirements placed on the electron beam provided an appropriate microwave active medium can be found. This paper is focused on our investigation of the possibility of a PASER operating in the microwave frequency regime [2] using active paramagnetic materials. While a high level of gain for PCBM was demonstrated compared to other candidate materials, dielectric losses and quenching effects were found to negatively impact its performance for PASER applications. We present results on

Microwave Tissue Ablation: Biophysics, Technology and Applications

Science.gov (United States)

2010-01-01

Microwave ablation is an emerging treatment option for many cancers, cardiac arrhythmias and other medical conditions. During treatment, microwaves are applied directly to tissues to produce rapid temperature elevations sufficient to produce immediate coagulative necrosis. The engineering design criteria for each application differ, with individual consideration for factors such as desired ablation zone size, treatment duration, and procedural invasiveness. Recent technological developments in applicator cooling, power control and system optimization for specific applications promise to increase the utilization of microwave ablation in the future. This article will review the basic biophysics of microwave tissue heating, provide an overview of the design and operation of current equipment, and outline areas for future research for microwave ablation. PMID:21175404

76 FR 75450 - Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC

Science.gov (United States)

2011-12-02

...-AA00 Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC AGENCY: Coast... moving safety zone around a barge transporting two container cranes on the Cooper and Wando Rivers during... barge will transit the Cooper and Wando Rivers. Because of the size of the two container cranes and the...

Advances on integrated microwave photonics

DEFF Research Database (Denmark)

Dong, Jianji; Liao, Shasha; Yan, Siqi

2017-01-01

Integrated microwave photonics has attracted a lot of attentions and makes significant improvement in last 10 years. We have proposed and demonstrated several schemes about microwave photonics including waveform generation, signal processing and energy-efficient micro-heaters. Our schemes are all...

High power microwaves

CERN Document Server

Benford, James; Schamiloglu, Edl

2016-01-01

Following in the footsteps of its popular predecessors, High Power Microwaves, Third Edition continues to provide a wide-angle, integrated view of the field of high power microwaves (HPMs). This third edition includes significant updates in every chapter as well as a new chapter on beamless systems that covers nonlinear transmission lines. Written by an experimentalist, a theorist, and an applied theorist, respectively, the book offers complementary perspectives on different source types. The authors address: * How HPM relates historically and technically to the conventional microwave field * The possible applications for HPM and the key criteria that HPM devices have to meet in order to be applied * How high power sources work, including their performance capabilities and limitations * The broad fundamental issues to be addressed in the future for a wide variety of source types The book is accessible to several audiences. Researchers currently in the field can widen their understanding of HPM. Present or pot...

Earthquake effect on volcano and the geological structure in central java using tomography travel time method and relocation hypocenter by grid search method

International Nuclear Information System (INIS)

Suharsono; Nurdian, S. W; Palupi, I. R.

2016-01-01

Relocating hypocenter is a way to improve the velocity model of the subsurface. One of the method is Grid Search. To perform the distribution of the velocity in subsurface by tomography method, it is used the result of relocating hypocenter to be a reference for subsurface analysis in volcanic and major structural patterns, such as in Central Java. The main data of this study is the earthquake data recorded from 1952 to 2012 with the P wave number is 9162, the number of events is 2426 were recorded by 30 stations located in the vicinity of Central Java. Grid search method has some advantages they are: it can relocate the hypocenter more accurate because this method is dividing space lattice model into blocks, and each grid block can only be occupied by one point hypocenter. Tomography technique is done by travel time data that has had relocated with inversion pseudo bending method. Grid search relocated method show that the hypocenter's depth is shallower than before and the direction is to the south, the hypocenter distribution is modeled into the subduction zone between the continent of Eurasia with the Indo-Australian with an average angle of 14 °. The tomography results show the low velocity value is contained under volcanoes with value of -8% to -10%, then the pattern of the main fault structure in Central Java can be description by the results of tomography at high velocity that is from 8% to 10% with the direction is northwest and northeast-southwest. (paper)

Microwave Breast Imaging Techniques

DEFF Research Database (Denmark)

Zhurbenko, Vitaliy; Rubæk, Tonny

2010-01-01

This paper outlines the applicability of microwave radiation for breast cancer detection. Microwave imaging systems are categorized based on their hardware architecture. The advantages and disadvantages of various imaging techniques are discussed. The fundamental tradeoffs are indicated between...... various requirements to be fulfilled in the design of an imaging system for breast cancer detection and some strategies to overcome these limitations....

Coupled Microwave/Photoassisted Methods for Environmental Remediation

Directory of Open Access Journals (Sweden)

Satoshi Horikoshi

2014-11-01

Full Text Available The microwave-induced acceleration of photocatalytic reactions was discovered serendipitously in the late 1990s. The activity of photocatalysts is enhanced significantly by both microwave radiation and UV light. Particularly relevant, other than as a heat source, was the enigmatic phenomenon of the non-thermal effect(s of the microwave radiation that facilitated photocatalyzed reactions, as evidenced when examining various model contaminants in aqueous media. Results led to an examination of the possible mechanism(s of the microwave effect(s. In the present article we contend that the microwaves’ non-thermal effect(s is an important factor in the enhancement of TiO2-photoassisted reactions involving the decomposition of organic pollutants in model wastewaters by an integrated (coupled microwave-/UV-illumination method (UV/MW. Moreover, such coupling of no less than two irradiation methods led to the fabrication and ultimate investigation of microwave discharged electrodeless lamps (MDELs as optimal light sources; their use is also described. The review focuses on the enhanced activity of photocatalytic reactions when subjected to microwave radiation and concentrates on the authors’ research of the past few years.

Microwave based method of monitoring crack formation

International Nuclear Information System (INIS)

Aman, Sergej; Aman, Alexander; Majcherek, Soeren; Hirsch, Soeren; Schmidt, Bertram

2014-01-01

The formation of cracks in glass particles was monitored by application of linearly polarized microwaves. The breakage behavior of glass spheres coated with a thin gold layer of about 50 nm, i.e. a thickness that is lower than the microwave penetration depth, was tested. In this way the investigation of fracture behavior of electronic circuits was simulated. A shielding current was induced in the gold layer by the application of microwaves. During the crack formation the distribution of this current changed abruptly and a scattered microwave signal appeared at the frequency of the incident microwaves. The time behavior of the scattered signal reflects the microscopic processes occurring during the fracture of the specimen. The duration of the increasing signal corresponds to the crack formation time in the tested specimen. This time was estimated as particle size divided by crack development speed in glass. An intense emission of electrons occurs during the formation of cracks. Due to this, coherent Thomson scattering of microwaves by emitted electrons becomes significant with a delay of a few microseconds after the initial phase of crack formation. In this time the intensity of the microwave signal increases. (paper)

Biologic effects and health hazards of microwave radiation

Energy Technology Data Exchange (ETDEWEB)

Czerski, P; Ostrowski, K; Shore, M L; Silverman, C., Suess, M.J.; Waldeskog, B

1974-01-01

Proceedings of an international symposium held in Warsaw, 15--18 Oct. 1973, sponsored by the World Health Organization, the U.S. Department of Health, Education and Welfare, and the Polish Scientific Council to the Minister of Health and Social Welfare are presented. It covered numerous aspects of exposure to microwave radiation. The papers more specifically relating to occupational exposure to microwaves deal with: measurement of microwave radiations, clinical manifestations, neurological findings, health status of microwave workers, blood protein disorders, effects of electromagnetic fields in densely populated areas, microwave cataract and concomitant pathology, retinal changes, assessment of lens translucency in microwave workers. A list of participants at the symposium and an author and subject index are appended.

Relocation of the 2010-2013 near the north coast of Papua earthquake sequence using Modified Joint Hypocenter Determination (MJHD) method

International Nuclear Information System (INIS)

Salomo, Dimas; Daryono,; Subakti, Hendri

2015-01-01

The accuracy of earthquake hypocenter position is necessary to analyze the tectonic conditions. This study aims to: (1) relocate the mainshock and aftershocks of the large earthquakes in Papua region i.e. June 16, 2010, April 21, 2012 and April 06, 2013 earthquake (2) determine the true fault plane, (3) estimate the area of the fracture, and (4) analyze the advantages and disadvantages of relocation with MJHD method in benefits for tectonic studies. This study used Modified Joint Hypocenter Determination (MJHD) method. Using P arrival phase data reported by the BMKG and openly available from website repogempa.bmkg.go.id, we relocated the mainshock of this large significant earthquake and its aftershocks. Then we identified the prefered fault planes from the candidate fault planes provided by the global CMT catalogue. The position of earthquakes was successfully relocated. The earthquakes mostly were clustered around the mainshock. Earthquakes that not clustered around mainshock are considered to be different mechanism from the mainshock. Relocation results indicate that the mainshock fault plane of June 16, 2010 earthquake is a field with strike 332o, dip 80o and −172o slip, the mainshock fault plane of April 21, 2012 earthquake is a field with strike 82o, dip 84o and 2o slip, the mainshock fault plane of April 06, 2013 earthquake is a field with strike 339o, dip 56o and −137o slip. Fault plane area estimated by cross section graphical method is an area of 2816.0 km2 (June 16, 2010), 906.2 km2 (April 21, 2012) and 1984.3 km2 (April 06, 2013). MJHD method has the advantage that it can calculate a lot of earthquakes simultaneously and has a station correction to account for lateral heterogeneity of the earth. This method successfully provides significant changes to improve the position of the depth of earthquakes that most of the hypocenter depth manually specified as a fixed depth (± 10 km). But this method cannot be sure that the hypocenters derived from the

Microwave studies of gas discharge plasmas

Energy Technology Data Exchange (ETDEWEB)

Brown, S C [Department of Physics and the Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA (United States)

1958-07-01

The plasma diagnostics in absence and in presence of magnetic field is discussed. It is concluded that it is not possible, even for low electron densities, to obtain a general theory in a form suitable for experimental verification and use in the microwave diagnostics of magnetized plasma, and valid for all possible configurations of the microwave field. Consequently, only a few special configurations of the microwave field are analysed.

Microwave Tokamak Experiment: Overview and status

International Nuclear Information System (INIS)

1990-05-01

The Microwave Tokamak Experiment, now under construction at the Laboratory, will use microwave heating from a free-electron laser. The intense microwave pulses will be injected into the tokamak to realize several goals, including a demonstration of the effects of localized heat deposition within magnetically confined plasma, a better understanding of energy confinement in tokamaks, and use of the new free-electron laser technology for plasma heating. 3 figs., 3 tabs

Harmonic distortion in microwave photonic filters.

Science.gov (United States)

Rius, Manuel; Mora, José; Bolea, Mario; Capmany, José

2012-04-09

We present a theoretical and experimental analysis of nonlinear microwave photonic filters. Far from the conventional condition of low modulation index commonly used to neglect high-order terms, we have analyzed the harmonic distortion involved in microwave photonic structures with periodic and non-periodic frequency responses. We show that it is possible to design microwave photonic filters with reduced harmonic distortion and high linearity even under large signal operation.

Atmospheric pressure microwave plasma system with ring waveguide

International Nuclear Information System (INIS)

Liu Liang; Zhang Guixin; Zhu Zhijie; Luo Chengmu

2007-01-01

Some scientists used waveguide as the cavity to produce a plasma jet, while large volume microwave plasma was relatively hard to get in atmospheric pressure. However, a few research institutes have already developed devices to generate large volume of atmospheric pressure microwave plasma, such as CYRANNUS and SLAN series, which can be widely applied. In this paper, present a microwave plasma system with ring waveguide to excite large volume of atmospheric pressure microwave plasma, plot curves on theoretical disruption electric field of some working gases, emulate the cavity through software, measure the power density to validate and show the appearance of microwave plasma. At present, large volume of argon and helium plasma have already been generated steadily by atmospheric pressure microwave plasma system. This research can build a theoretical basis of microwave plasma excitation under atmospheric pressure and will be useful in study of the device. (authors)

Microwave Imaging for Breast Cancer Detection

DEFF Research Database (Denmark)

Rubæk, Tonny; Fhager, Andreas; Jensen, Peter Damsgaard

2011-01-01

Still more research groups are promoting microwave imaging as a viable supplement or substitution to more conventional imaging modalities. A widespread approach for microwave imaging of the breast is tomographic imaging in which one seeks to reconstruct the distributions of permittivity and condu......Still more research groups are promoting microwave imaging as a viable supplement or substitution to more conventional imaging modalities. A widespread approach for microwave imaging of the breast is tomographic imaging in which one seeks to reconstruct the distributions of permittivity...... and conductivity in the breast. In this paper two nonlinear tomographic algorithms are compared – one is a single-frequency algorithm and the other is a time-domain algorithm....

Relocating Precarity and Resiliency within Montreal: The Artists' Bloc of the Immigrant Workers' Centre

Science.gov (United States)

Hall, Koby Rogers; Salamanca, Manuel

2017-01-01

In this document we describe our experience relocating precarity and resiliency by way of arts activism, to denounce and make visible social injustices experienced by im/migrant communities in Montreal. Under the umbrella of the Immigrant Workers' Centre, and other allies from the im/migrant workers' movement, we combine knowledge building, action…

41 CFR 302-12.4 - For what relocation services expenses will my agency pay?

Science.gov (United States)

2010-07-01

... actual expenses the company incurs on your behalf, payment to the company is limited to what you would... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false For what relocation services expenses will my agency pay? 302-12.4 Section 302-12.4 Public Contracts and Property Management...

Relocation of Intermediate-depth Seismicity in the Relic Alboran Slab: Clustering and Relationship to Tearing and Dehydration Embrittlement.

Science.gov (United States)

Sun, M.; Bezada, M.

2017-12-01

Intermediate-depth seismicity outside active subduction zones is rare. However, there is a well-known occurrence of such events in a N-S elongated volume between Spain and Morocco, within what most researchers consider to be the relic Alboran slab. Partial subduction of, and tearing from the adjoining continental lithosphere have been suggested in this area. We investigate whether dehydration embrittlement or shear instability is more consistent with the Alboran intermediate depth seismicity by considering their location relative to the expected thermal structure and expected areas of high strain rate associated with thinning or tearing of the slab. We use a dense temporary seismograph deployment in Spain and Morocco to relocate 65 intermediate-depth events occurring between 2010 and 2013 in this region. The relocation procedure is realized by a grid-search approach that minimizes the normalized misfit between the picked times and travel times calculated using a regional 3D velocity model. Results indicate that, compared with catalog results, hypocenters after relocation are more concentrated in space; they tend to shift southward and eastward while no systematic shift in depth is observed. Relocated hypocenters concentrate at a depth range between 50-100 km and along a narrow longitude range around 4.5W. Investigation of the earthquake density distribution indicates these earthquakes concentrate into several clusters. One such cluster sits above the spain-arm of the Alboran slab and beneath the Spain continental lithosphere, indicating that it is likely associated to the thinning process of the Alboran slab. The other four clusters all lie within the interior of the slab. Interestingly, two of them are near the middle of the subducted lithosphere and the other two lie near its base. This observation seems at odds with expectations based on the two leading hypotheses for enabling brittle failure at intermediate depths.

Influence of microwaves on olive oil stability

International Nuclear Information System (INIS)

Farag, R.S.; El-Baroty, G.; Abd El-Aziz, N.; Basuny, A.M.

1997-01-01

The fruits of Picual and Shemlalli olive cultivars were exposed to microwaves generated from an oven at low and moderate power settings for 3, 6, 9 and 12 min. The physicochemical constants and fatty acid composition of the olive oil samples extracted from nonmicrowaved and microwaved fruits were determined. The data demonstrated that microwaves did not alter the values of the above mentioned parameters compared with the oil extracted from nonmicrowaved fruits. Quality assurance tests (acid, peroxide and TBA values) elucidated that microwaves generally increased the olive oil stability of Picual and Shemlalli cultivars during storage. In addition, microwaves generated from oven ot moderate power setting for 12 min. exhibited an antioxidant power on olive oil equivalent to that possessed by BHT at 200 ppm [es

Microwave Heating of Synthetic Skin Samples for Potential Treatment of Gout Using the Metal-Assisted and Microwave-Accelerated Decrystallization Technique

OpenAIRE

Toker, Salih; Boone-Kukoyi, Zainab; Thompson, Nishone; Ajifa, Hillary; Clement, Travis; Ozturk, Birol; Aslan, Kadir

2016-01-01

Physical stability of synthetic skin samples during their exposure to microwave heating was investigated to demonstrate the use of the metal-assisted and microwave-accelerated decrystallization (MAMAD) technique for potential biomedical applications. In this regard, optical microscopy and temperature measurements were employed for the qualitative and quantitative assessment of damage to synthetic skin samples during 20 s intermittent microwave heating using a monomode microwave source (at 8 G...

Microwave sintering of hydroxyapatite-based composites

International Nuclear Information System (INIS)

Fang, Y.; Roy, D.M.; Cheng, J.; Roy, R.; Agrawal, D.K.

1993-01-01

Composites of hydroxyapatite/partially stabilized zirconia (HAp/PSZ) and hydroxyapatite/silicon carbide whiskers (HAp/SiC) were sintered at 1100-1200 degrees C by microwave at 2.45 GHz. Characterization of the sintered composites was carried out by density, microstructure, phase composition, and fracture toughness measurements. The results show that although not yet fully densified, a much higher sintered density in the HAp/PSZ composite was achieved by microwave sintering than by conventional sintering at the same temperature. A relative density of 93% was achieved by 20 min. microwave processing at 1200 degrees C. Comparatively, 2 h conventional sintering of the same material at 1200 degrees C led to only 75.5% relative density. K IC of this microwave sintered HAp/PSZ of 93% density was found to be 3.88 MPa√m, which is 250% of the value for pure HAp of the same density. A further increase in K IC could be expected if full or nearly full densification was achieved. Sintering of PSZ particles in the HAp/PSZ composite was also observed in the microwave processed sample. Microwave sintering of HAp/SiC was not successful in the current study due to the oxidation of SiC in air at high temperature. 8 refs., 4 figs., 1 tab

Impacting earthquake science and geoscience education: Educational programming to earthquake relocation

Science.gov (United States)

Carrick, Tina Louise

This dissertation is comprised of four studies: three related to research on geoscience education and another seismological study of the South Island of New Zealand. The geoscience education research is grounded in 10 years of data collection and its implications for best practices for recruitment and retention of underrepresented minority students into higher education in the geosciences. The seismological component contains results from the relocation of earthquakes from the 2009 Dusky Sound Mw 7.8 event, South Island, New Zealand. In recent years, many have cited a major concern that U.S. is not producing enough STEM graduates to fit the forecasted economic need. This situation is exacerbated by the fact that underrepresented minorities are becoming a growing portion of the population, and people in these groups enter STEM careers at rates much smaller than their proportion of the populations. Among the STEM disciplines the Geosciences are the worst at attracting young people from underrepresented minorities. This dissertation reports on results the Pathways program at the University of Texas at El Paso Pathways which sought to create a geoscience recruitment and training network in El Paso, Texas to increase the number of Hispanic Americans students to attain higher degrees and increase the awareness of the geosciences from 2002-2012. Two elements of the program were a summer program for high school students and an undergraduate research program conducted during the academic year, called PREP. Data collected from pre- and post-surveys from the summer program showed statistically significant positive changes in attitudes towards the geosciences. Longitudinal data shows a strong positive correlation of the program with retention of participants in the geoscience pipeline. Results from the undergraduate research program show that it produced far more women and minority geoscience professionals than national norms. Combination of the institutional data, focus

[Distribution and pollution assessment of heavy metals in soil of relocation areas from the Danjiangkou Reservoir].

Science.gov (United States)

Zhang, Lei; Qin, Yan-Wen; Zheng, Bing-Hui; Shi, Yao; Han, Chao-Nan

2013-01-01

The aim of this article is to explore the pollution level and potential ecological risk of heavy metals in soil of the relocation areas from the Danjiangkou Reservoir. The contents and spatial distribution of Cd, Pb, Cu, Zn, Cr and As in soil of the relocation areas from the Danjiangkou Reservoir were analyzed. The integrated pollution index and potential ecological risk index were used to evaluate the contamination degree and potential ecological risk of these elements. The results indicated that the average contents of Cd, Pb, Cu, Zn, Cr and As in the samples were 0.61, 23.11, 58.25, 22.65, 58.99 and 16.95 mg x kg(-1), respectively. Compared with the background value of soils from Henan province, all these 6 elements except Zn were enriched to some extent, especially Cd. Similar patterns were observed for the spatial distribution of Cu, Zn, and Pb. Compared with the contents of heavy metals in surface sediments of the typical domestic reservoirs, Cd and As in soil of the relocation areas from the Danjiangkou Reservoir were heavily accumulated. The correlation analysis showed that there were significant positive correlations among Pb, Cu, and Zn. And there was also significant positive correlation between Cr and Pb. In contrast, negative correlation was found between Cr and As. To sum up, the comprehensive assessment results showed that Cd was the primary element with high ecological risk.

Microwave Microscope

Data.gov (United States)

Federal Laboratory Consortium — FUNCTION: Makes ultra-high-resolution field measurements. The Microwave Microscope (MWM) has been used in support of several NRL experimental programs involving sea...

Microwave Radiometry in Remote Sensing

DEFF Research Database (Denmark)

Gudmandsen, Preben

1982-01-01

Microwave radiometry has shown its capabilities of observing and monitoring large-scale geophysical observables from space. Examples are sea surface temperature and surface wind over the ocean, sea ice extent, concentration and category and snow cover extent and water content. At low microwave fr...

Influence of Intimate Partner Violence on Domestic Relocation in Metropolitan and Non-Metropolitan Young Australian Women

NARCIS (Netherlands)

Dillon, Gina; Hussain, Rafat; Kibele, Eva; Rahman, Saifur; Loxton, Deborah

2016-01-01

Data from a national, population-based longitudinal study of Australian women (26-34 years) were analyzed to investigate the association between domestic relocation and multiple explanatory factors, namely intimate partner violence (IPV), metropolitan versus non-metropolitan residence, education,

Microwave Absorption Characteristics of Tire

Science.gov (United States)

Zhang, Yuzhe; Hwang, Jiann-Yang; Peng, Zhiwei; Andriese, Matthew; Li, Bowen; Huang, Xiaodi; Wang, Xinli

The recycling of waste tires has been a big environmental problem. About 280 million waste tires are produced annually in the United States and more than 2 billion tires are stockpiled, which cause fire hazards and health issues. Tire rubbers are insoluble elastic high polymer materials. They are not biodegradable and may take hundreds of years to decompose in the natural environment. Microwave irradiation can be a thermal processing method for the decomposition of tire rubbers. In this study, the microwave absorption properties of waste tire at various temperatures are characterized to determine the conditions favorable for the microwave heating of waste tires.

High-Power Microwave Transmission and Mode Conversion Program

Energy Technology Data Exchange (ETDEWEB)

Vernon, Ronald J. [Univ. of Wisconsin, Madison, WI (United States)

2015-08-14

This is a final technical report for a long term project to develop improved designs and design tools for the microwave hardware and components associated with the DOE Plasma Fusion Program. We have developed basic theory, software, fabrication techniques, and low-power measurement techniques for the design of microwave hardware associated gyrotrons, microwave mode converters and high-power microwave transmission lines. Specifically, in this report we discuss our work on designing quasi-optical mode converters for single and multiple frequencies, a new method for the analysis of perturbed-wall waveguide mode converters, perturbed-wall launcher design for TE0n mode gyrotrons, quasi-optical traveling-wave resonator design for high-power testing of microwave components, and possible improvements to the HSX microwave transmission line.

Current status of investigations on molten fuel: Coolant interaction, material movement and relocation in LMFBRs in Russia

International Nuclear Information System (INIS)

Buksha, Yu.; Kuznetsov, I.

1994-01-01

The paper contains information on experimental studies and calculation codes, related to molten fuel-coolant interaction, material movement and relocation. Some calculation results for the BN-800 type reactor are presented. (author)

Microwave Plasma System: PVA Tepla 300

Data.gov (United States)

Federal Laboratory Consortium — Description:CORAL Name: Microwave AsherA tool using microwave oxygen plasma to remove organics on the surfacesSpecifications / Capabilities:Frequency: 2.45 GHzPower:...

Study on microwave assisted process in chemical extraction

International Nuclear Information System (INIS)

Amer Ali; Rosli Mohd Yunus; Ramlan Abd Aziz

2001-01-01

The microwave assisted process is a revolutionary method of extraction that reduces the extraction time to as little as a few seconds, with up to a ten-fold decrease in the use of solvents. The target material is immersed in solvent that is transparent to microwaves, so only the target material is heated, and because of the microwaves tend to heat the inside of the material quickly, the target chemical are expelled in a few seconds. benefits from this process include significant reductions in the amount of energy required and substantial reductions in the cost and dispose of hazardous solvents. A thorough review has been displayed on: using the microwave in extraction, applications of microwave in industry, process flow diagram, mechanism of the process and comparison between microwave process and other extraction techniques (soxhlet, steam distillation and supercritical fluid). This review attempts to summarize the studies about microwave assisted process as a very promising technique. (Author)

Application of high power microwave vacuum electron devices

International Nuclear Information System (INIS)

Ding Yaogen; Liu Pukun; Zhang Zhaochuan; Wang Yong; Shen Bin

2011-01-01

High power microwave vacuum electron devices can work at high frequency, high peak and average power. They have been widely used in military and civil microwave electron systems, such as radar, communication,countermeasure, TV broadcast, particle accelerators, plasma heating devices of fusion, microwave sensing and microwave heating. In scientific research, high power microwave vacuum electron devices are used mainly on high energy particle accelerator and fusion research. The devices include high peak power klystron, CW and long pulse high power klystron, multi-beam klystron,and high power gyrotron. In national economy, high power microwave vacuum electron devices are used mainly on weather and navigation radar, medical and radiation accelerator, TV broadcast and communication system. The devices include high power pulse and CW klystron, extended interaction klystron, traveling wave tube (TWT), magnetron and induced output tube (IOT). The state of art, common technology problems and trends of high power microwave vacuum electron devices are introduced in this paper. (authors)

The extraction of essential oil from patchouli leaves (Pogostemon cablin Benth) using microwave hydrodistillation and solvent-free microwave extraction methods

Science.gov (United States)

Putri, D. K. Y.; Kusuma, H. S.; Syahputra, M. E.; Parasandi, D.; Mahfud, M.

2017-12-01

Patchouli plant (Pogostemon cablin Benth) is one of the important essential oil-producing plant, contributes more than 50% of total exports of Indonesia’s essential oil. However, the extraction of patchouli oil that has been done in Indonesia is generally still used conventional methods that require enormous amount of energy, high solvent usage, and long time of extraction. Therefore, in this study, patchouli oil extraction was carried out by using microwave hydrodistillation and solvent-free microwave extraction methods. Based on this research, it is known that the extraction of patchouli oil using microwave hydrodistillation method with longer extraction time (240 min) only produced patchouli oil’s yield 1.2 times greater than solvent-free microwave extraction method which require faster extraction time (120 min). Otherwise the analysis of electric consumption and the environmental impact, the solvent-free microwave extraction method showed a smaller amount when compared with microwave hydrodistillation method. It is conclude that the use of solvent-free microwave extraction method for patchouli oil extraction is suitably method as a new green technique.

Fuel pellet relocation behavior in fast reactor uranium-plutonium mixed oxide fuel pin at beginning-of-life

International Nuclear Information System (INIS)

Inoue, Masaki; Ukai, Shigeharu; Asaga, Takeo

1999-08-01

The effects of fabrication parameters, irradiation conditions and fuel microstructural feature on fuel pellet relocation behavior in fast reactor fuel pins were investigated. This work focused only on beginning-of-life conditions, when fuel centerline temperature depends largely on the behavior. Fuel pellet relocation behavior in Joyo Mk-II driver could not be characterized because of the lack of data. And the behavior in FFTF driver and its larger diameter type fuel pins could not be characterized because of the extensive lot-by-lot scatters. The behavior both in Monju type and in Joyo power-to-melt type fuel pins were similar to each other, and depends largely on the as-fabricated gap width while the effects of linear heat rate and the extent of microstructural evolution were negligible. And fuel pellet centerline melting seems to affect slightly the behavior. The correlation, which describes the extent of relocation both in Monju type and in Joyo power-to-melt type fuel pins, were newly formulated and extrapolated for Joyo Mk-II driver, FFTF driver and its larger diameter type fuel pins. And the behavior in Joyo Mk-II driver seemed to be similar. On the contrary, the similarity with JNC fuel pins was observed case-by-case in FFTF driver and its larger diameter type fuel pins. (author)

Freeze dehydration of milk using microwave energy

International Nuclear Information System (INIS)

Souda, K.B.; Akyel, C.; Bilgen, E.

1989-01-01

This paper presents the results of experimental studies on heat and mass transfer during a microwave freeze dehydration process. An experimental system and procedure was developed to freeze dry milk. A 2500-W microwave system with an appropriate wave guide was set up and instrumented, and a procedure was experimentally developed to obtain milk powder first by freezing milk and then dehydrating it at low pressure using microwave energy. An unsteady-state analysis was used to derive a one-dimensional mathematical model of the freeze dehydration process in a microwave electromagnetic field

Does social status within a dominance hierarchy mediate individual growth, residency and relocation?

Science.gov (United States)

Akbaripasand, Abbas; Ramezani, J; Krkosek, Martin; Lokman, P Mark; Closs, Gerard P

2014-11-01

The availability of food, and hence energy, is known to influence the abundance, habitat choice and growth of individuals. In contrast, there is a paucity of knowledge on how the interaction of energy supply and social status determines patterns of residency and movement. This study tests whether the presence of conspecifics and an individual's social status in relation to food supply influence the fitness and movement of a drift-feeding fish (Galaxias fasciatus). Using an information-theoretic approach (AIC), our analysis indicated that the most parsimonious model of fish movement among pools was one that included food supply, social rank and fish relative growth rate. Our results indicated that subordinate fish relocated more frequently compared to dominant fish, most likely as a consequence of intra-specific competition that limited the access of these smaller fish to resources and constrained their growth. Our results suggest that energy constraints may force individuals to explore new habitats in an effort to find more energetically profitable patches. We conclude that intra-specific competition mediated through the social hierarchy amongst closely interacting individuals plays a key role in determining individual growth, residency and relocation.

Continuous microwave flow synthesis of mesoporous hydroxyapatite.

Science.gov (United States)

Akram, Muhammad; Alshemary, Ammar Z; Goh, Yi-Fan; Wan Ibrahim, Wan Aini; Lintang, Hendrik O; Hussain, Rafaqat

2015-11-01

We have successfully used continuous microwave flow synthesis (CMFS) technique for the template free synthesis of mesoporous hydroxyapatite. The continuous microwave flow reactor consisted of a modified 2.45GHz household microwave, peristaltic pumps and a Teflon coil. This cost effective and efficient system was exploited to produce semi-crystalline phase pure nano-sized hydroxyapatite. Effect of microwave power, retention time and the concentration of reactants on the phase purity, degree of crystallinity and surface area of the final product was studied in detail. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to study the phase purity and composition of the product, while transmission electron microscopy (TEM) was used to study the effect of process parameters on the morphology of hydroxyapatite. The TEM analysis confirmed the formation of spherical particles at low microwave power; however the morphology of the particles changed to mesoporous needle and rod-like structure upon exposing the reaction mixture to higher microwave power and longer retention time inside the microwave. The in-vitro ion dissolution behavior of the as synthesized hydroxyapatite was studied by determining the amount of Ca(2+) ion released in SBF solution. Copyright © 2015 Elsevier B.V. All rights reserved.

Microwave combustion and sintering without isostatic pressure

International Nuclear Information System (INIS)

Ebadian, M.A.

1998-01-01

In recent years interest has grown rapidly in the application of microwave energy to the processing of ceramics, composites, polymers, and other materials. Advances in the understanding of microwave/materials interactions will facilitate the production of new ceramic materials with superior mechanical properties. One application of particular interest is the use of microwave energy for the mobilization of uranium for subsequent redeposition. Phase III (FY98) will focus on the microwave assisted chemical vapor infiltration tests for mobilization and redeposition of radioactive species in the mixed sludge waste. Uranium hexachloride and uranium (IV) borohydride are volatile compounds for which the chemical vapor infiltration procedure might be developed for the separation of uranium. Microwave heating characterized by an inverse temperature profile within a preformed ceramic matrix will be utilized for CVI using a carrier gas. Matrix deposition is expected to commence from the inside of the sample where the highest temperature is present. The preform matrix materials, which include aluminosilicate based ceramics and silicon carbide based ceramics, are all amenable to extreme volume reduction, densification, and vitrification. Important parameters of microwave sintering such as frequency, power requirement, soaking temperature, and holding time will be investigated to optimize process conditions for the volatilization of uranyl species using a reactive carrier gas in a microwave chamber

Modeling of microwave heating of metallic powders

International Nuclear Information System (INIS)

Buchelnikov, V.D.; Louzguine-Luzgin, D.V.; Anzulevich, A.P.; Bychkov, I.V.; Yoshikawa, N.; Sato, M.; Inoue, A.

2008-01-01

As it is known from the experiment that bulk metallic samples reflect microwaves while powdered samples can absorb such a radiation and be heated efficiently. In the present paper we investigate theoretically the mechanisms of penetration of a layer of metallic powder by microwave radiation and microwave heating of such a system

The Cosmic Microwave Background Anisotropy

Science.gov (United States)

Bennett, C. L.

1994-12-01

The properties of the cosmic microwave background radiation provide unique constraints on the history and evolution of the universe. The first detection of anisotropy of the microwave radiation was reported by the COBE Team in 1992, based on the first year of flight data. The latest analyses of the first two years of COBE data are reviewed in this talk, including the amplitude of the microwave anisotropy as a function of angular scale and the statistical nature of the fluctuations. The two-year results are generally consistent with the earlier first year results, but the additional data allow for a better determination of the key cosmological parameters. In this talk the COBE results are compared with other observational anisotropy results and directions for future cosmic microwave anisotropy observations will be discussed. The National Aeronautics and Space Administration/Goddard Space Flight Center (NASA/GSFC) is responsible for the design, development, and operation of the Cosmic Background Explorer (COBE). Scientific guidance is provided by the COBE Science Working Group.

Microwave Palaeointensity Experiments On Terrestrial and Martian Material

Science.gov (United States)

Shaw, J.; Hill, M.; Gratton, M.

The microwave palaeointensity technique was developed in Liverpool University (Walton et al 1996) and has successfully been applied to archaeological ceramics and recent lavas (Shaw et al 1996, 1999.; Hill et al 1999,2000). These published results show that microwave analysis provides accurate palaeointensity determinations com- bined with a very high success rate. Most recently the technique has been successfully applied to Martian material (Shaw et al, 2001) to look for the existence of an internal Martian dynamo early in Martian history. New experiments have been carried out us- ing microwaves to demagnetise synthetic muti-component TRM's and new palaeoin- tensity experiments providing a comparison between microwave analysis of laboratory TRM's and conventional thermal Thellier analysis of microwave generated mTRM's. These experiments demonstrate the equivalence of microwave and thermally gener- ated TRM's. D. Walton, S Snape, T.C. Rolph, J. Shaw and J.A. Share, Application of ferromagnetic resonance heating to palaeointensity determinations.1996, Phys Earth Planet Int,94, 183-186. J. Shaw, D. Walton, S Yang, T.C.Rolph, and J.A. Share. Microwave Archaeointensities from Peruvian Ceramics. 1996, Geophys. J. Int,124,241-244 J. Shaw, S. Yang, T. C. Rolph, and F. Y. Sun. A comparison of archaeointensity results from Chinese ceramics using Microwave and conventional ThellierSs and ShawSs methods.,1999, G J Int.136, 714-718 M. Hill, and J. Shaw, 1999, Palaeointensity results for Historic Lavas from Mt. Etna using microwave demagnetisation/remagnetisation in a modified Thellier type exper- iment. G. J. Int, 139, 583-590 M. J. Hill, and J. Shaw, 2000. Magnetic field intensity study of the 1960 Kilauea lava flow, Hawaii, using the microwave palaeointensity technique, Geophys. J. Int., 142, 487-504. J. Shaw, M. Hill, and S. J. Openshaw, 2001, Investigating the ancient Martian magnetic field using microwaves, Earth and Planetary Science Letters 190 (2001) 103-109

A novel symmetrical microwave power sensor based on GaAs monolithic microwave integrated circuit technology

International Nuclear Information System (INIS)

Wang, De-bo; Liao, Xiao-ping

2009-01-01

A novel symmetrical microwave power sensor based on GaAs monolithic microwave integrated circuit (MMIC) technology is presented in this paper. In this power sensor, the left section inputs the microwave power, while the right section inputs the dc power. Because of the symmetrical structure, this power sensor is created to provide more accurate microwave power measurement capability without mismatch uncertainty and restrain temperature drift. The loss model is built and the loss voltage is 0.8 mV at 20 GHz when the input power is 100 mW. This power sensor is designed and fabricated using GaAs MMIC technology. And it is measured in the frequency range up to 20 GHz with the input power in the −20 dBm to 19 dBm range. Over the 19 dBm dynamic range, the sensitivity can achieve about 0.2 mV mW −1 . The difference between the input powers in the two sections is below 0.1% for equal output voltages. For an amplitude modulation measurement, the carrier frequency is the main factor to influence the measurement results. In short, the key aspect of this power sensor is that the microwave power measurement can be replaced by a dc power measurement with precise wideband

Selection of Models for Ingestion Pathway and Relocation

International Nuclear Information System (INIS)

Blanchard, A.; Thompson, J.M.

1998-01-01

The area in which intermediate phase protective actions (such as food interdiction and relocation) may be needed following postulated accidents at three Savannah River Site nonreactor nuclear facilities will be determined by modeling. The criteria used to select dispersion/deposition models are presented. Several models are considered, including ARAC, MACCS, HOTSPOT, WINDS (coupled with PUFF-PLUME), and UFOTRI. Although ARAC and WINDS are expected to provide more accurate modeling of atmospheric transport following an actual release, analyses consistent with regulatory guidance for planning purposes may be accomplished with comparatively simple dispersion models such as HOTSPOT and UFOTRI. A recommendation is made to use HOTSPOT for non-tritium facilities and UFOTRI for tritium facilities. The most recent Food and Drug Administration Derived Intervention Levels (August 1998) are adopted as evaluation guidelines for ingestion pathways

Selection of Models for Ingestion Pathway and Relocation

International Nuclear Information System (INIS)

Blanchard, A.; Thompson, J.M.

1999-01-01

The area in which intermediate phase protective actions (such as food interdiction and relocation) may be needed following postulated accidents at three Savannah River Site nonreactor nuclear facilities will be determined by modeling. The criteria used to select dispersion/deposition models are presented. Several models are considered, including ARAC, MACCS, HOTSPOT, WINDS (coupled with PUFF-PLUME), and UFOTRI. Although ARAC and WINDS are expected to provide more accurate modeling of atmospheric transport following an actual release, analyses consistent with regulatory guidance for planning purposes may be accomplished with comparatively simple dispersion models such as HOTSPOT and UFOTRI. A recommendation is made to use HOTSPOT for non-tritium facilities and UFOTRI for tritium facilities. The most recent Food and Drug Administration Derived Intervention Levels (August 1998) are adopted as evaluation guidelines for ingestion pathways

A study of pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing on properties of aluminium/alumina nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Abedinzadeh, Reza; Safavi, Seyed Mohsen; Karimzadeh, Fathallah [Isfahan University, Isfahan (Iran, Islamic Republic of)

2016-05-15

Bulk Al/4wt-%Al{sub 2}O{sub 3} nanocomposites were prepared by consolidating nanocomposite powders using pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing techniques. Microstructural observations revealed that the microwave-assisted hot press sintering at different sintering temperatures of 400.deg.C and 500.deg.C resulted in more densification and smaller grain size for Al/Al{sub 2}O{sub 3} nanocomposite as compared with the conventional hot pressing. Moreover, the application of pressure in microwave sintering process led to more densification and grain growth. Mechanical properties resulting from microhardness and nanoindentation tests were also compared between three-method processed samples. It was found that the microwave-assisted hot-pressed sample exhibited higher hardness and elastic modulus in comparison with microwave-sintered and conventional hot-pressed samples. The improvement in the mechanical properties can be ascribed to lower porosity of microwave-assisted hot-pressed sample.

Microwave SQUID multiplexer demonstration for cosmic microwave background imagers

Science.gov (United States)

Dober, B.; Becker, D. T.; Bennett, D. A.; Bryan, S. A.; Duff, S. M.; Gard, J. D.; Hays-Wehle, J. P.; Hilton, G. C.; Hubmayr, J.; Mates, J. A. B.; Reintsema, C. D.; Vale, L. R.; Ullom, J. N.

2017-12-01

Key performance characteristics are demonstrated for the microwave superconducting quantum interference device (SQUID) multiplexer (μmux) coupled to transition edge sensor (TES) bolometers that have been optimized for cosmic microwave background (CMB) observations. In a 64-channel demonstration, we show that the μmux produces a white, input referred current noise level of 29 pA/ √{H z } at a microwave probe tone power of -77 dB, which is well below the expected fundamental detector and photon noise sources for a ground-based CMB-optimized bolometer. Operated with negligible photon loading, we measure 98 pA/ √{H z } in the TES-coupled channels biased at 65% of the sensor normal resistance. This noise level is consistent with that predicted from bolometer thermal fluctuation (i.e., phonon) noise. Furthermore, the power spectral density is white over a range of frequencies down to ˜100 mHz, which enables CMB mapping on large angular scales that constrain the physics of inflation. Additionally, we report cross-talk measurements that indicate a level below 0.3%, which is less than the level of cross-talk from multiplexed readout systems in deployed CMB imagers. These measurements demonstrate the μmux as a viable readout technique for future CMB imaging instruments.

Investigation of the coolability of a continuous mass of relocated debris to a water-filled lower plenum. Technical report

International Nuclear Information System (INIS)

Rempe, J.L.; Wolf, J.R.; Chavez, S.A.; Condie, K.G.; Hagrman, D.L.; Carmack, W.J.

1994-09-01

This report documents work performed to support the development of an analytical and experimental program to investigate the coolability of a continuous mass of debris that relocates to a water-filled lower plenum. The objective of this program is to provide an adequate data base for developing and validating a model to predict the coolability of a continuous mass of debris relocating to a water-filled lower plenum. The model must address higher pressure scenarios, such as the TMI-2 accident, and lower pressure scenarios, which recent calculations indicate are more likely for most operating LWR plants. The model must also address a range of possible debris compositions

Microwave processing in MOX fuel cycle

International Nuclear Information System (INIS)

Mallik, G.K.; Malav, R.K.; Panakkal, J.P.; Kamath, H.S.

2005-01-01

The prominent aspect of the microwave heating technique applications in nuclear material processing is its eco-friendly status. It is envisaged that no active liquid waste will be generated from microwave processing. AFFF has fabricated the (U, Pu) 2 O mixed oxide fuels for PHWRs, BWRs and PFBR. AFFF is also working for the AHWR fuel cycle. The present paper summarises about the process experiments, instrumental development, results, and future applications of microwave heating technique. (author)

Computerized portable microwave hyperthermia quality assurance kit

International Nuclear Information System (INIS)

Cheung, A.Y.; Neyzari, A.

1985-01-01

A computerized quality assurance kit to provide precise measurement and calibration of microwave power and temperature, as well as capabilities to map SAR (Specific absorption rate) distribution in phantoms; and survey of hazardous microwave leakage has been designed. The kit is also capable of performing corelation studies on the relationship between SAR and net microwave power delivered at various anatomical sites. The kit consists of a portable microcomputer, a time-multiplexed A/D converter, a 4-channel dual directional microwave power monitor, a 4-channel thin-wire thermocouple thermometry system, an electronic thermal calibrator, a microwave leakage hazard survey meter, and a dynamic phantom tank for dosimetric analysis. Comparative performance studies were made against NBS-traceable power and temperature standards, non-perturbing optical temperature sensors, and established power and temperature measurement devices. The test results indicate that this instrument is providing its user with measurement accuracy of 0.1 0 C in temperature, 10% accuracy in power. The thin-wire thermocouple, with computer assisted error compensation, performs equally well in a strong microwave field in comparison with non-perturbing optical temperature sensors

[Experimental study on spectra of compressed air microwave plasma].

Science.gov (United States)

Liu, Yong-Xi; Zhang, Gui-Xin; Wang, Qiang; Hou, Ling-Yun

2013-03-01

Using a microwave plasma generator, compressed air microwave plasma was excited under 1 - 5 atm pressures. Under different pressures and different incident microwave power, the emission spectra of compressed air microwave plasma were studied with a spectra measuring system. The results show that continuum is significant at atmospheric pressure and the characteristic will be weakened as the pressure increases. The band spectra intensity will be reduced with the falling of the incident microwave power and the band spectra were still significant. The experimental results are valuable to studying the characteristics of compressed air microwave plasma and the generating conditions of NO active groups.

Gas Discharge Produced by Strong Microwaves of Nanosecond Duration

International Nuclear Information System (INIS)

Vikharev, A.L.

2000-01-01

The results of the investigation of nanosecond microwave discharge are reviewed. Nanosecond microwave discharge is a new branch of gas discharge physics. The paper lists base types of microwave generators used to produce nanosecond discharge and classifies the discharges relative to their base parameters: the way the discharge gets localized in a limited space, amplitude and frequency of microwave field, gas pressure, duration of microwave pulses. The laboratory experiments performed and the new effects which appear in nanosecond microwave discharge are briefly summarized. Different applications of such a discharge are analyzed on the basis of the experimental modelling. (author)

Effect of microwave irradiation on petrophysical characterization of coals

International Nuclear Information System (INIS)

Hong, Yi-du; Lin, Bai-quan; Zhu, Chuan-jie; Li, He

2016-01-01

Highlights: • Microwave energy increase porosity, pore size and numbers of coals. • Growth rates of porosity decreased at first then increased with microwave energy. • NMR can be reliable to measure coal samples. • Microwave energy may have the potential for degassing of coal seams. - Abstract: The experimental work described in this paper aims to study the effect of microwave irradiation on petrophysical characterization of coals. Twenty coal samples were irradiated at 2.45 GHz with variable power (2, 4, 6 kW). The temperature, mass and specific heat capacity of coal samples were measured and calculated. The effect of microwave irradiation on the porosity of coal samples was evaluated by the gravimetric method and nuclear magnetic resonance (NMR) measurements. The porosity obviously increases after microwave heating. Interestingly, growth rate of the porosity decreases at first then increases with microwave energy. The turning point is approximately 100 kJ. The influence of microwave irradiation on pore size, throat size and pore numbers of coal samples were also evaluated by NMR measurements. It suggest that the pore size, throat size and pore numbers are obviously increase with microwave energy. In a word, it appears likely that microwave energy may have the potential for the degassing coal seams.

41 CFR 302-1.1 - Who is eligible for relocation expense allowances under this chapter?

Science.gov (United States)

2010-07-01

... Postal Service to an agency as defined in 5 U.S.C. 5721; (d) An employee performing travel in accordance... to the same or different Government agency. (f) A student trainee assigned to any position upon... Management Federal Travel Regulation System RELOCATION ALLOWANCES INTRODUCTION 1-GENERAL RULES Applicability...

Spontaneous Relocation of a Posterior Dislocation of Mobile Bearing in a Medial Unicompartmental Knee Replacement

Science.gov (United States)

Noureddine, Hussein; Aird, Jaimes; Latimer, Paul

2012-01-01

We describe a case of spontaneous relocation of a posterior dislocation of the mobile bearing in a medial unicompartmental knee replacement, prior to surgical intervention. We are unaware of any similar cases in the published literature. This paper highlights some clinical issues around this type of dislocation. PMID:23259116

Microwave Triggered Laser Ionization of Air

Science.gov (United States)

Vadiee, Ehsan; Prasad, Sarita; Jerald Buchenauer, C.; Schamiloglu, Edl

2012-10-01

The goal of this work is to study the evolution and dynamics of plasma expansion when a high power microwave (HPM) pulse is overlapped in time and space on a very small, localized region of plasma formed by a high energy laser pulse. The pulsed Nd:YAG laser (8 ns, 600mJ, repetition rate 10 Hz) is focused to generate plasma filaments in air with electron density of 10^17/cm^3. When irradiated with a high power microwave pulse these electrons would gain enough kinetic energy and further escalate avalanche ionization of air due to elastic electron-neutral collisions thereby causing an increased volumetric discharge region. An X-band relativistic backward wave oscillator(RBWO) at the Pulsed Power,Beams and Microwaves laboratory at UNM is constructed as the microwave source. The RBWO produces a microwave pulse of maximum power 400 MW, frequency of 10.1 GHz, and energy of 6.8 Joules. Special care is being given to synchronize the RBWO and the pulsed laser system in order to achieve a high degree of spatial and temporal overlap. A photodiode and a microwave waveguide detector will be used to ensure the overlap. Also, a new shadowgraph technique with a nanosecond time resolution will be used to detect changes in the shock wave fronts when the HPM signal overlaps the laser pulse in time and space.

SAFARI-1 research reactor beryllium reflector element replacement, management and relocation

International Nuclear Information System (INIS)

Kock, Marisa De; Vlok, Jwh; Steynberg, B.J.

2012-01-01

decommissioned beryllium elements were also measured to investigate the occurrence of ageing mechanisms and their consequences, and to determine the location of the element's vulnerable areas. This supports the Beryllium Management Programme in terms of an optimal shuffling scheme to mitigate the effects of ageing. Currently, the decommissioned beryllium reflector elements are stored in a storage rack within the reactor pool. Due to limited space it is necessary to relocate these elements. A proposed relocation strategy based on existing literature is discussed. This strategy covers the requirements, relocation process and types of storage to be considered. (author)

SAFARI-1 research reactor beryllium reflector element replacement, management and relocation

Energy Technology Data Exchange (ETDEWEB)

Kock, Marisa De; Vlok, Jwh; Steynberg, B J [South Africa Atomic Energy Corporation (Necsa) (South Africa)

2012-03-15

decommissioned beryllium elements were also measured to investigate the occurrence of ageing mechanisms and their consequences, and to determine the location of the element's vulnerable areas. This supports the Beryllium Management Programme in terms of an optimal shuffling scheme to mitigate the effects of ageing. Currently, the decommissioned beryllium reflector elements are stored in a storage rack within the reactor pool. Due to limited space it is necessary to relocate these elements. A proposed relocation strategy based on existing literature is discussed. This strategy covers the requirements, relocation process and types of storage to be considered. (author)

Application of microwave to drying and blanching of tomatoes

International Nuclear Information System (INIS)

Ando, Y.; Orikasa, T.; Shiina, T.; Sotome, I.; Isobe, S.; Muramatsu, Y.; Tagawa, A.

2010-01-01

The applicability of microwave to the drying and blanching of tomatoes was examined. The changes of the drying rate and surface color were first measured and compared between drying by hot air (50degC) or microwave at three radiation powers. The drying rates using a microwave were higher than that using hot air. Both a constant-rate drying period and a falling-rate drying period were observed for each microwave radiation power. Compared to hot air drying, microwave drying resulted in an increase in lightness which is a preferable quality of tomatoes. Next, the changes in temperature, nutrients and surface color were measured and compared between blanching by microwave or boiling water. Microwave blanching required less time, resulted in higher retention of nutrients (ascorbic acid and lycopene) and caused less change in color in comparison with boiling water blanching. These results suggest that a microwave could be applied to drying and blanching tomatoes

Behavioral effects of microwave reinforcement schedules and variations in microwave intensity on albino rats

Energy Technology Data Exchange (ETDEWEB)

Vitulli, W.F.; Lambert, J.K.; Brown, S.W.; Quinn, J.M.

1987-12-01

The objective of this exploratory investigation was to determine the interactive effects of fixed-ratio scheduling of microwave reinforcement in tandem with changes in microwave intensity. Nine albino rats were conditioned to regulate their thermal environment with microwave radiation while living in a Skinner (operant conditioning) Box in which the ambient temperature was about 27.13 degrees F at the beginning of the session. Each rat obtained a 6-sec. exposure of microwave radiation on a fixed-ratio schedule of MW reinforcement, the values of which varied from FR-1 to FR-30. Intensities of MW radiation were 62.5 W, 125 W, 250 W, and 437.5 W. Sessions lasted for 8 to 9 hr. over an approximate 13-mo. period. The effects of the intensity of microwave reinforcement varied as a function of the ratio value of the schedule used. Continuous reinforcement (FR-1) produced the lowest over-all rates, whereas FR-15, and FR-25 produced the highest over-all rates. Relatively higher thermal-behavior rates occurred under 62.5 W than under any of the other MW intensities for FR-1, FR-15, and FR-25, whereas FR-10 and FR-30 ratios produced intermediate rates of thermal responding which were constant for all values of MW intensity. These data are explained in terms of interactive effects between the local satiation or deprivation properties of the MW intensity and the ratio requirements of the schedule of MW reinforcement.

[Child health environment in the context of relocating of camp site families to social housing].

Science.gov (United States)

Burgos, Soledad; Sigala, Fiorenza; Argueta, Luzmila; Iglesias, Verónica

2015-01-01

Housing interventions aimed at overcoming poverty can lead to changes in the health status of children by modifying risk factors in their physical and social environment the aim was to identify children's environmental health factors to change with the relocation of families from slums to public housing. A cross-sectional study was conducted in children ages 2-8 years old of families relocated to public housing (n=115) who were compared to children residing in slums (n=88) in Santiago, Chile. Family socioeconomic characteristics, indoor environment and neighborhoods were collected. It was included respiratory symptoms, accidents and maternal-child care of children. χ2, Fisher and Mann-Whitney test were used to compare groups. There were differences in households related to pets keeping, presence of humidity/molds in homes, types of fuels, and perceived safety problems in neighborhoods (p<0.05). The families from slums reported higher tenancy of pets (73.8% v/s 32.2%%), humidity/molds in homes (43.,2% v/s 18.3%), use of wood for heating (39.8% v/s 0.0%), compared with families of public housing. Residents of public housing perceived more safety problems in neighborhood, and children have more asthma related symptoms and have lower diversity of accidents in home. Among the factors studied, indoor air quality and safety in neighborhoods could be linked to changes from the relocation of families. This reinforces the need to deepen the positive and negative influences of residential mobility of these groups focused on child welfare perspective. Copyright © 2015 Sociedad Chilena de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Duplication and relocation of the functional DPY19L2 gene within low copy repeats

Directory of Open Access Journals (Sweden)

Cheung Joseph

2006-03-01

Full Text Available Abstract Background Low copy repeats (LCRs are thought to play an important role in recent gene evolution, especially when they facilitate gene duplications. Duplicate genes are fundamental to adaptive evolution, providing substrates for the development of new or shared gene functions. Moreover, silencing of duplicate genes can have an indirect effect on adaptive evolution by causing genomic relocation of functional genes. These changes are theorized to have been a major factor in speciation. Results Here we present a novel example showing functional gene relocation within a LCR. We characterize the genomic structure and gene content of eight related LCRs on human Chromosomes 7 and 12. Two members of a novel transmembrane gene family, DPY19L, were identified in these regions, along with six transcribed pseudogenes. One of these genes, DPY19L2, is found on Chromosome 12 and is not syntenic with its mouse orthologue. Instead, the human locus syntenic to mouse Dpy19l2 contains a pseudogene, DPY19L2P1. This indicates that the ancestral copy of this gene has been silenced, while the descendant copy has remained active. Thus, the functional copy of this gene has been relocated to a new genomic locus. We then describe the expansion and evolution of the DPY19L gene family from a single gene found in invertebrate animals. Ancient duplications have led to multiple homologues in different lineages, with three in fish, frogs and birds and four in mammals. Conclusion Our results show that the DPY19L family has expanded throughout the vertebrate lineage and has undergone recent primate-specific evolution within LCRs.

Commercial microwave space power

International Nuclear Information System (INIS)

Siambis, J.; Gregorwich, W.; Walmsley, S.; Shockey, K.; Chang, K.

1991-01-01

This paper reports on central commercial space power, generating power via large scale solar arrays, and distributing power to satellites via docking, tethering or beamed power such as microwave or laser beams, that is being investigated as a potentially advantageous alternative to present day technology where each satellite carries its own power generating capability. The cost, size and weight for electrical power service, together with overall mission requirements and flexibility are the principal selection criteria, with the case of standard solar array panels based on the satellite, as the reference point. This paper presents and investigates a current technology design point for beamed microwave commercial space power. The design point requires that 25 kW be delivered to the user load with 30% overall system efficiency. The key elements of the design point are: An efficient rectenna at the user end; a high gain, low beam width, efficient antenna at the central space power station end, a reliable and efficient cw microwave tube. Design trades to optimize the proposed near term design point and to explore characteristics of future systems were performed. Future development for making the beamed microwave space power approach more competitive against docking and tethering are discussed

Semi-automated microwave assisted solid-phase peptide synthesis

DEFF Research Database (Denmark)

Pedersen, Søren Ljungberg

with microwaves for SPPS has gained in popularity as it for many syntheses has provided significant improvement in terms of speed, purity, and yields, maybe especially in the synthesis of long and "difficult" peptides. Thus, precise microwave heating has emerged as one new parameter for SPPS, in addition...... to coupling reagents, resins, solvents etc. We have previously reported on microwave heating to promote a range of solid-phase reactions in SPPS. Here we present a new, flexible semi-automated instrument for the application of precise microwave heating in solid-phase synthesis. It combines a slightly modified...... Biotage Initiator microwave instrument, which is available in many laboratories, with a modified semi-automated peptide synthesizer from MultiSynTech. A custom-made reaction vessel is placed permanently in the microwave oven, thus the reactor does not have to be moved between steps. Mixing is achieved...

Electron-beam and microwave treatment of some microbial strains

International Nuclear Information System (INIS)

Martin, D.; Ferdes, O.S.; Minea, R.; Tirlea, A.; Badea, M.; Plamadeala, S.; Ferdes, M.

1998-01-01

The experimental results concerning the combined effects of microwaves and accelerated electron beams on various microbial strains such as E. coli, Salmonella sp. and Monascus purpureus are presented. A special designed microwave applicator with a 2.45 GHz frequency CW magnetron of 850 maximum output power and with associate electronics that allow to control the microwave power, the current intensity, and the exposure time was used. The electron-beam irradiation was performed at different irradiation doses and at a dose rate of 1.5 - 2.0 kGy/min by using a linac at a mean electron energy about 6 MeV, mean bean current of 10 μA, pulse period of 3.5 μs and repetition frequency 100 Hz. The experiments were carried out in 5 variants: microwave treatment; electron-beam irradiation; microwaves followed by electron beam; electrons followed by microwaves; and simultaneous application of microwaves and electron beam. The microbiocidal effect was found to be enhanced by additional use of microwave energy to electron beam irradiation. Enhancement of inactivation rate is only remarkable for the microwave treatment or simultaneous electron beam and microwave irradiation at a temperature above the critical value at which microorganisms begin to perish by heat. Simultaneous irradiation with electron beam and microwaves results in a reduction of temperature and time as well as in the decrease of the upper limit of required electron beam absorbed dose for an assumed microbiological quality parameter. The results obtained indicate the occurrence of a synergistic effect of the two physical fields on a non-thermal basis. Hence, combined microwave-electron beam treatment may be applied as an effective method to reduce microbial load

Microwave-assisted grinding of metallurgical coke

International Nuclear Information System (INIS)

Ruisanchez, E.; Juarez-Perez, E. J.; Arenillas, A.; Bermudez, J. M.; Menendez, J. A.

2014-01-01

Metallurgical cokes are composed of graphitic carbon (s2p2) and different inorganic compounds with very different capacities to absorb microwave radiation. Moreover, due to the electric conductivity shown by the metallurgical cokes, microwave radiation produces electric arcs or microplasmas, which gives rise to hot spots. Therefore, when these cokes are irradiated with microwaves some parts of the particle experiment a rapid heating, while some others do not heat at all. As a result of the different expansion and stress caused by thermal the shock, small cracks and micro-fissures are produced in the particle. The weakening of the coke particles, and therefore an improvement of its grind ability, is produced. This paper studies the microwave-assisted grinding of metallurgical coke and evaluates the grinding improvement and energy saving. (Author)

Microwave coagulation therapy and drug injection to treat splenic injury.

Science.gov (United States)

Zhang, Guoming; Sun, Yuanyuan; Yu, Jie; Dong, Lei; Mu, Nannan; Liu, Xiaohong; Liu, Lanfen; Zhang, Yan; Wang, Xiaofei; Liang, Ping

2014-01-01

The present study compares the efficacy of 915- and 2450-MHz contrast-enhanced ultrasound (CEUS)-guided percutaneous microwave coagulation with that of CEUS-guided thrombin injection for the treatment of trauma-induced spleen hemorrhage. In a canine splenic artery hemorrhage model with two levels of arterial diameter (A, microwaves and drug injection. Therapy efficacy was measured by comparing bleeding rate, hemostatic time, bleeding index, bleeding volume, and pathology. The most efficient technique was CEUS-guided 915-MHz percutaneous microwave coagulation therapy in terms of action time and total blood loss. The success rate of the 915-MHz microwave group was higher than that of the 2450-MHz microwave and the drug injection groups (except A level, P microwave group than those in the 2450-MHz microwave and drug injection groups (P microwave group, but pathologic changes of light injury could be seen in the other groups. The present study provides evidence that microwave coagulation therapy is more efficient than thrombin injection for the treatment of splenic hemorrhage. Furthermore, treatment with 915-MHz microwaves stops bleeding more rapidly and generates a wider cauterization zone than does treatment with 2450-MHz microwaves. Copyright © 2014 Elsevier Inc. All rights reserved.

Ion-channeling analysis of As relocation in heavily doped Si:As irradiated with high-energy ions

International Nuclear Information System (INIS)

Lulli, G.; Albertazzi, E.; Bianconi, M.; Ferri, M.

2003-01-01

Silicon on insulator layers doped with 8x10 20 As cm -3 and thermally equilibrated at 1100 deg. C, have been irradiated with 2 MeV Si + ions. Rutherford backscattering-channeling analysis shows an increase in As disorder upon irradiation significantly larger than the increase in Si disorder, while electrical measurements show a large decrease in electrical activation. Monte Carlo simulation of channeling angular scans suggests that the enhanced As disorder effect is due to the preferential relocation of dopant atoms slightly displaced from lattice sites, which appear the main reason responsible for the electrical deactivation in the unirradiated sample and are believed to be in the form of As-vacancy clusters. Upon 600 deg. C 15 s annealing, the As atoms randomly relocated by ion irradiation almost completely recover their original configuration, probably capturing vacancies and forming, again, the complexes dissociated by ion irradiation

Microwave circulator design

CERN Document Server

Linkhart, Douglas K

2014-01-01

Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

Rapid biodiesel production using wet microalgae via microwave irradiation

International Nuclear Information System (INIS)

Wahidin, Suzana; Idris, Ani; Shaleh, Sitti Raehanah Muhamad

2014-01-01

Highlights: • Lipid was directly extracted from wet microalgae using microwave irradiation. • The microwave irradiation and water bath-assisted solvent extraction are applied. • Cell walls are significantly disrupted under microwave irradiation. • Highly disrupted cell walls led to higher biodiesel yield in microwave irradiation. • Microwave irradiation is a promising direct technique with high biodiesel yields. - Abstract: The major challenges for industrial commercialized biodiesel production from microalgae are the high cost of downstream processing such as dewatering and drying, utilization of large volumes of solvent and laborious extraction processes. In order to address these issues the microwave irradiation method was used to produce biodiesel directly from wet microalgae biomass. This alternative method of biodiesel production from wet microalgae biomass is compared with the conventional water bath-assisted solvent extraction. The microwave irradiation extracted more lipids and high biodiesel conversion was obtained compared to the water bath-assisted extraction method due to the high cell disruption achieved and rapid transesterification. The total content of lipid extracted from microwave irradiation and water bath-assisted extraction were 38.31% and 23.01% respectively. The biodiesel produced using microwave irradiation was higher (86.41%) compared to the conventional method. Thus microwave irradiation is an attractive and promising technology to be used in the extraction and transesterification process for efficient biodiesel production

[Application of microwave irradiation technology to the field of pharmaceutics].

Science.gov (United States)

Zhang, Xue-Bing; Shi, Nian-Qiu; Yang, Zhi-Qiang; Wang, Xing-Lin

2014-03-01

Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

Spontaneous Relocation of a Posterior Dislocation of Mobile Bearing in a Medial Unicompartmental Knee Replacement

Directory of Open Access Journals (Sweden)

Hussein Noureddine

2012-01-01

Full Text Available We describe a case of spontaneous relocation of a posterior dislocation of the mobile bearing in a medial unicompartmental knee replacement, prior to surgical intervention. We are unaware of any similar cases in the published literature. This paper highlights some clinical issues around this type of dislocation.

Microwave Enhanced Cotunneling in SET Transistors

DEFF Research Database (Denmark)

Manscher, Martin; Savolainen, M.; Mygind, Jesper

2003-01-01

Cotunneling in single electron tunneling (SET) devices is an error process which may severely limit their electronic and metrologic applications. Here is presented an experimental investigation of the theory for adiabatic enhancement of cotunneling by coherent microwaves. Cotunneling in SET...... transistors has been measured as function of temperature, gate voltage, frequency, and applied microwave power. At low temperatures and applied power levels, including also sequential tunneling, the results can be made consistent with theory using the unknown damping in the microwave line as the only free...

RF and microwave coupled-line circuits

CERN Document Server

Mongia, R K; Bhartia, P; Hong, J; Gupta, K C

2007-01-01

This extensively revised edition of the 1999 Artech House classic, RF and Microwave Coupled-Line Circuits, offers you a thoroughly up-to-date understanding of coupled line fundamentals, explaining their applications in designing microwave and millimeter-wave components used in today's communications, microwave, and radar systems. The Second Edition includes a wealth of new material, particularly relating to applications. You find brand new discussions on a novel simple design technique for multilayer coupled circuits, high pass filters using coupled lines, software packages used for filter des

CW 100MW microwave power transfer in space

International Nuclear Information System (INIS)

Takayama, K.; Hiramatsu, S.; Shiho, M.

1991-01-01

A proposal is made for high-power microwave transfer in space. The concept consists in a microwave power station integrating a multistage microwave free-electron laser and asymmetric dual-reflector system. Its use in space is discussed. 9 refs., 2 figs., 1 tab

Circular Bioassay Platforms for Applications in Microwave-Accelerated Techniques.

Science.gov (United States)

Mohammed, Muzaffer; Clement, Travis C; Aslan, Kadir

2014-12-02

In this paper, we present the design of four different circular bioassay platforms, which are suitable for homogeneous microwave heating, using theoretical calculations (i.e., COMSOL™ multiphysics software). Circular bioassay platforms are constructed from poly(methyl methacrylate) (PMMA) for optical transparency between 400-800 nm, has multiple sample capacity (12, 16, 19 and 21 wells) and modified with silver nanoparticle films (SNFs) to be used in microwave-accelerated bioassays (MABs). In addition, a small monomode microwave cavity, which can be operated with an external microwave generator (100 W), for use with the bioassay platforms in MABs is also developed. Our design parameters for the circular bioassay platforms and monomode microwave cavity during microwave heating were: (i) temperature profiles, (ii) electric field distributions, (iii) location of the circular bioassay platforms inside the microwave cavity, and (iv) design and number of wells on the circular bioassay platforms. We have also carried out additional simulations to assess the use of circular bioassay platforms in a conventional kitchen microwave oven (e.g., 900 W). Our results show that the location of the circular bioassay platforms in the microwave cavity was predicted to have a significant effect on the homogeneous heating of these platforms. The 21-well circular bioassay platform design in our monomode microwave cavity was predicted to offer a homogeneous heating pattern, where inter-well temperature was observed to be in between 23.72-24.13°C and intra-well temperature difference was less than 0.21°C for 60 seconds of microwave heating, which was also verified experimentally.

Combination microwave ovens: an innovative design strategy.

Science.gov (United States)

Tinga, Wayne R; Eke, Ken

2012-01-01

Reducing the sensitivity of microwave oven heating and cooking performance to load volume, load placement and load properties has been a long-standing challenge for microwave and microwave-convection oven designers. Conventional design problem and solution methods are reviewed to provide greater insight into the challenge and optimum operation of a microwave oven after which a new strategy is introduced. In this methodology, a special load isolating and energy modulating device called a transducer-exciter is used containing an iris, a launch box, a phase, amplitude and frequency modulator and a coupling plate designed to provide spatially distributed coupling to the oven. This system, when applied to a combined microwave-convection oven, gives astounding performance improvements to all kinds of baked and roasted foods including sensitive items such as cakes and pastries, with the only compromise being a reasonable reduction in the maximum available microwave power. Large and small metal utensils can be used in the oven with minimal or no performance penalty on energy uniformity and cooking results. Cooking times are greatly reduced from those in conventional ovens while maintaining excellent cooking performance.

Low-level microwave irradiation and central cholinergic systems

International Nuclear Information System (INIS)

Lai, H.; Carino, M.A.; Horita, A.; Guy, A.W.

1989-01-01

Our previous research showed that 45 min of exposure to low-level, pulsed microwaves (2450-MHz, 2-microseconds pulses, 500 pps, whole-body average specific absorption rate 0.6 W/kg) decreased sodium-dependent high-affinity choline uptake in the frontal cortex and hippocampus of the rat. The effects of microwaves on central cholinergic systems were further investigated in this study. Increases in choline uptake activity in the frontal cortex, hippocampus, and hypothalamus were observed after 20 min of acute microwave exposure, and tolerance to the effect of microwaves developed in the hypothalamus, but not in the frontal cortex and hippocampus, of rats subjected to ten daily 20-min exposure sessions. Furthermore, the effects of acute microwave irradiation on central choline uptake could be blocked by pretreating the animals before exposure with the narcotic antagonist naltrexone. In another series of experiments, rats were exposed to microwaves in ten daily sessions of either 20 or 45 min, and muscarinic cholinergic receptors in different regions of the brain were studied by 3H-QNB binding assay. Decreases in concentration of receptors occurred in the frontal cortex and hippocampus of rats subjected to ten 20-min microwave exposure sessions, whereas increase in receptor concentration occurred in the hippocampus of animals exposed to ten 45-min sessions. This study also investigated the effects of microwave exposure on learning in the radial-arm maze. Rats were trained in the maze to obtain food reinforcements immediately after 20 or 45 min of microwave exposure

Refraction and absorption of microwaves in wood

International Nuclear Information System (INIS)

Ziherl, Saša; Bajc, Jurij; Čepič, Mojca

2013-01-01

A demonstration experiment for physics students showing the dependence of the refractive index and absorption coefficient of wood on the direction of microwaves is presented. Wood and microwaves enable study of anisotropic properties, which are typically found in crystals. Wood is used as the persuasive representative of uniaxial anisotropic materials due to its visible structure and its consequent anisotropic properties. Wood can be cut in a general direction and wooden plates a few centimetres thick with well-defined fibre orientation are easily prepared. Microwaves are used because wood is transparent for microwaves and their centimetre-scale wavelength is comparable to the wood structure. (paper)

Use of microwave remote sensing in salinity estimation

International Nuclear Information System (INIS)

Singh, R.P.; Kumar, V.; Srivastav, S.K.

1990-01-01

Soil-moisture interaction and the consequent liberation of ions causes the salinity of waters. The salinity of river, lake, ocean and ground water changes due to seepage and surface runoff. We have studied the feasibility of using microwave remote sensing for the estimation of salinity by carrying out numerical calculations to study the microwave remote sensing responses of various models representative of river, lake and ocean water. The results show the dependence of microwave remote sensing responses on the salinity and surface temperature of water. The results presented in this paper will be useful in the selection of microwave sensor parameters and in the accurate estimation of salinity from microwave remote sensing data

Compact Microwave Fourier Spectrum Analyzer

Science.gov (United States)

Savchenkov, Anatoliy; Matsko, Andrey; Strekalov, Dmitry

2009-01-01

A compact photonic microwave Fourier spectrum analyzer [a Fourier-transform microwave spectrometer, (FTMWS)] with no moving parts has been proposed for use in remote sensing of weak, natural microwave emissions from the surfaces and atmospheres of planets to enable remote analysis and determination of chemical composition and abundances of critical molecular constituents in space. The instrument is based on a Bessel beam (light modes with non-zero angular momenta) fiber-optic elements. It features low power consumption, low mass, and high resolution, without a need for any cryogenics, beyond what is achievable by the current state-of-the-art in space instruments. The instrument can also be used in a wide-band scatterometer mode in active radar systems.

Phase 2 microwave concrete decontamination results

International Nuclear Information System (INIS)

White, T.L.; Foster, D. Jr.; Wilson, C.T.; Schaich, C.R.

1995-01-01

The authors report on the results of the second phase of a four-phase program at Oak Ridge National Laboratory to develop a system to decontaminate concrete using microwave energy. The microwave energy is directed at the concrete surface through the use of an optimized wave guide antenna, or applicator, and this energy rapidly heats the free water present in the interstitial spaces of the concrete matrix. The resulting steam pressure causes the surface to burst in much the same way popcorn pops in a home microwave oven. Each steam explosion removes several square centimeters of concrete surface that are collected by a highly integrated wave guide and vacuum system. The authors call this process the microwave concrete decontamination, or MCD, process. In the first phase of the program the principle of microwaves concrete removal concrete surfaces was demonstrated. In these experiments, concrete slabs were placed on a translator and moved beneath a stationary microwave system. The second phase demonstrated the ability to mobilize the technology to remove the surfaces from concrete floors. Area and volume concrete removal rates of 10.4 cm 2 /s and 4.9 cm 3 /S, respectively, at 18 GHz were demonstrated. These rates are more than double those obtained in Phase 1 of the program. Deeper contamination can be removed by using a longer residence time under the applicator to create multiple explosions in the same area or by taking multiple passes over previously removed areas. Both techniques have been successfully demonstrated. Small test sections of painted and oil-soaked concrete have also been removed in a single pass. Concrete with embedded metal anchors on the surface has also been removed, although with some increased variability of removal depth. Microwave leakage should not pose any operational hazard to personnel, since the observed leakage was much less than the regulatory standard

Microwave system engineering principles

CERN Document Server

Raff, Samuel J

1977-01-01

Microwave System Engineering Principles focuses on the calculus, differential equations, and transforms of microwave systems. This book discusses the basic nature and principles that can be derived from thermal noise; statistical concepts and binomial distribution; incoherent signal processing; basic properties of antennas; and beam widths and useful approximations. The fundamentals of propagation; LaPlace's Equation and Transmission Line (TEM) waves; interfaces between homogeneous media; modulation, bandwidth, and noise; and communications satellites are also deliberated in this text. This bo

Plasma filamentation and shock wave enhancement in microwave rockets by combining low-frequency microwaves with external magnetic field

International Nuclear Information System (INIS)

Takahashi, Masayuki; Ohnishi, Naofumi

2016-01-01

A filamentary plasma is reproduced based on a fully kinetic model of electron and ion transports coupled with electromagnetic wave propagation. The discharge plasma transits from discrete to diffusive patterns at a 110-GHz breakdown, with decrease in the ambient pressure, because of the rapid electron diffusion that occurs during an increase in the propagation speed of the ionization front. A discrete plasma is obtained at low pressures when a low-frequency microwave is irradiated because the ionization process becomes more dominant than the electron diffusion, when the electrons are effectively heated by the low-frequency microwave. The propagation speed of the plasma increases with decrease in the incident microwave frequency because of the higher ionization frequency and faster plasma diffusion resulting from the increase in the energy-absorption rate. An external magnetic field is applied to the breakdown volume, which induces plasma filamentation at lower pressures because the electron diffusion is suppressed by the magnetic field. The thrust performance of a microwave rocket is improved by the magnetic fields corresponding to the electron cyclotron resonance (ECR) and its higher-harmonic heating, because slower propagation of the ionization front and larger energy-absorption rates are obtained at lower pressures. It would be advantageous if the fundamental mode of ECR heating is coupled with a lower frequency microwave instead of combining the higher-harmonic ECR heating with the higher frequency microwave. This can improve the thrust performance with smaller magnetic fields even if the propagation speed increases because of the decrease in the incident microwave frequency.

Plasma filamentation and shock wave enhancement in microwave rockets by combining low-frequency microwaves with external magnetic field

Energy Technology Data Exchange (ETDEWEB)

Takahashi, Masayuki, E-mail: m.takahashi@al.t.u-tokyo.ac.jp [Department of Aeronautics and Astronautics, The University of Tokyo, Bunkyo-ku 113-8656 (Japan); Ohnishi, Naofumi [Department of Aerospace Engineering, Tohoku University, Sendai 980-8579 (Japan)

2016-08-14

A filamentary plasma is reproduced based on a fully kinetic model of electron and ion transports coupled with electromagnetic wave propagation. The discharge plasma transits from discrete to diffusive patterns at a 110-GHz breakdown, with decrease in the ambient pressure, because of the rapid electron diffusion that occurs during an increase in the propagation speed of the ionization front. A discrete plasma is obtained at low pressures when a low-frequency microwave is irradiated because the ionization process becomes more dominant than the electron diffusion, when the electrons are effectively heated by the low-frequency microwave. The propagation speed of the plasma increases with decrease in the incident microwave frequency because of the higher ionization frequency and faster plasma diffusion resulting from the increase in the energy-absorption rate. An external magnetic field is applied to the breakdown volume, which induces plasma filamentation at lower pressures because the electron diffusion is suppressed by the magnetic field. The thrust performance of a microwave rocket is improved by the magnetic fields corresponding to the electron cyclotron resonance (ECR) and its higher-harmonic heating, because slower propagation of the ionization front and larger energy-absorption rates are obtained at lower pressures. It would be advantageous if the fundamental mode of ECR heating is coupled with a lower frequency microwave instead of combining the higher-harmonic ECR heating with the higher frequency microwave. This can improve the thrust performance with smaller magnetic fields even if the propagation speed increases because of the decrease in the incident microwave frequency.

Nuclear-microwave-electric propulsion

International Nuclear Information System (INIS)

Nordley, G.D.; Brown, W.C.

1986-01-01

Electric propulsion can move more mass through space than chemical propulsion by virtue of the higher exhaust velocities achieved by electric propulsion devices. This performance is achieved at the expense of very heavy power sources or very long trip times, which in turn create technical and economic penalties of varying severity. These penalties include: higher operations costs, delayed availability of the payload, and increased exposure to Van Allen Belt radiation. It is proposed to reduce these penalties by physically separating the power source from the propulsion and use microwave energy beaming technology, recently explored and partially developed/tested for Solar Power Satellite concept studies, as an extension cord. This paper summarizes the state of the art of the technology needed for space based beam microwave power cost/performance trades involved with the use beamed microwave/electric propulsion for some typical orbit transfer missions and offers some suggestions for additional work

Microwave line of sight link engineering

CERN Document Server

Angueira, Pablo

2012-01-01

A comprehensive guide to the design, implementation, and operation of line of sight microwave link systems The microwave Line of Sight (LOS) transport network of any cellular operator requires at least as much planning effort as the cellular infrastructure itself. The knowledge behind this design has been kept private by most companies and has not been easy to find. Microwave Line of Sight Link Engineering solves this dilemma. It provides the latest revisions to ITU reports and recommendations, which are not only key to successful design but have changed dramatically in

"Tired of watching customers walk out the door because of the smoke": a content analysis of media coverage of voluntarily smokefree restaurants and bars.

Science.gov (United States)

McDaniel, Patricia A; Offen, Naphtali; Yerger, Valerie; Forsyth, Susan; Malone, Ruth E

2015-08-08

News media are key sources of information regarding tobacco issues, and help set the tobacco control policy agenda. We examined US news coverage of voluntarily smokefree restaurants and bars in locales without mandatory policies to understand how such initiatives are perceived. We searched three online media databases (Access World News, Lexis Nexis, and Proquest) for all news items, including opinion pieces, published from 1995 to 2011. We coded retrieved items quantitatively, analyzing the volume, type, provenance, prominence, and content of news coverage. We found 986 news items, most published in local newspapers. News items conveyed unambiguous support for voluntarily smokefree establishments, regardless of venue. Mandatory policies were also frequently mentioned, and portrayed positively or neutrally. Restaurant items were more likely to mention health-related benefits of going smokefree, with bar items more likely to mention business-related benefits. Voluntary smokefree rules in bars and restaurants are regarded by news media as reasonable responses to health and business-based concerns about worker and customer exposure to secondhand smoke. As efforts continue to enact comprehensive smokefree policies to protect all in such venues, the media are likely to be supportive partners in the advocacy process, helping to generate public and policymaker support.

Remote measurement of microwave distribution based on optical detection

Energy Technology Data Exchange (ETDEWEB)

Ji, Zhong; Ding, Wenzheng; Yang, Sihua; Chen, Qun, E-mail: redrocks-chenqun@hotmail.com, E-mail: xingda@scnu.edu.cn; Xing, Da, E-mail: redrocks-chenqun@hotmail.com, E-mail: xingda@scnu.edu.cn [MOE Key Laboratory of Laser Life Science and Institute of Laser Life Science, South China Normal University, Guangzhou 510631 (China)

2016-01-04

In this letter, we present the development of a remote microwave measurement system. This method employs an arc discharge lamp that serves as an energy converter from microwave to visible light, which can propagate without transmission medium. Observed with a charge coupled device, quantitative microwave power distribution can be achieved when the operators and electronic instruments are in a distance from the high power region in order to reduce the potential risk. We perform the experiments using pulsed microwaves, and the results show that the system response is dependent on the microwave intensity over a certain range. Most importantly, the microwave distribution can be monitored in real time by optical observation of the response of a one-dimensional lamp array. The characteristics of low cost, a wide detection bandwidth, remote measurement, and room temperature operation make the system a preferred detector for microwave applications.

Microwave RF antennas and circuits nonlinearity applications in engineering

CERN Document Server

Aluf, Ofer

2017-01-01

This book describes a new concept for analyzing RF/microwave circuits, which includes RF/microwave antennas. The book is unique in its emphasis on practical and innovative microwave RF engineering applications. The analysis is based on nonlinear dynamics and chaos models and shows comprehensive benefits and results. All conceptual RF microwave circuits and antennas are innovative and can be broadly implemented in engineering applications. Given the dynamics of RF microwave circuits and antennas, they are suitable for use in a broad range of applications. The book presents analytical methods for microwave RF antennas and circuit analysis, concrete examples, and geometric examples. The analysis is developed systematically, starting with basic differential equations and their bifurcations, and subsequently moving on to fixed point analysis, limit cycles and their bifurcations. Engineering applications include microwave RF circuits and antennas in a variety of topological structures, RFID ICs and antennas, micros...

Flexible composite via rapid titania coating by microwave-assisted ...

Indian Academy of Sciences (India)

2017-06-09

Jun 9, 2017 ... carbon fibre via microwave-assisted hydrothermal synthesis (MHS) ... Nanoparticles; titanium dioxide; microwave-assisted hydrothermal synthesis; carbon fibre. ..... study, the carbon fibre absorbs microwave radiation and con-.

THE ROMANIAN RURAL SPACE AND ITS LANDSCAPES: ATTRACTION AND MOTIVATION FOR RELOCATING TOWNSPEOPLE

Directory of Open Access Journals (Sweden)

IULIAN DINCĂ

2015-05-01

Full Text Available The Romanian Rural Space And Its Landscapes: Attraction And Motivation For Relocating Townspeople. It is an easily noticed fact that a new generation of residents has been establishing new habitation structures all over Romania. This also applies to the south-eastern Oradea Suburban Area, in north-western Romania. The analysed suburban landscapes bring out open attitudes in former city dwellers, strongly biased pro-landscape (78.52% of all interviewees. The landscape criterion ranks second in reasons for relocation, indicating that local nature meets the expectations of the new residents. Indubitable spiritual benefits are also involved, the new residents’ perception of local landscapes being dominated by responses like beauty, repose, naturalness. However, the new residents do not have a narrowed-down, specialised definition in their minds when expressing opinions on local landscape physiognomy in detail, and on outstanding features that render local landscapes attractive. Even the landscape management interventions of new residents and of local authorities revolve around land estate categories and tailored urbanistic requisitions. Consequently, the configuration of neo-landscapes with a distinct suburban identity emerges. The major directions of this case study may serve as groundwork for further studies on the issue of landscape as subject matter in attracting city dwellers to suburban locations.

THE BOGOR BUS STATION RELOCATION IMPACT ANALYSIS TO THE BOGOR OUTER RING ROAD (BORR AND PANGERAN SOGIRI STREET PERFORMANCE

Directory of Open Access Journals (Sweden)

Tri Sudibyo

2015-02-01

Full Text Available As the main bus station in Bogor, West Java, Baranangsiang bus station is currently located in the crowded city centre, near many offices, campuses and department stores. There is a plan of Bogor’s Dinas Perhubungan Komunikasi dan Informasi (Diskominfo to relocate the bus station to the new location in the Pangeran Sogiri Street in Tanah Baru area, near the newly built toll road, the Bogor Outer Ring Road (BORR.This research is conducted to analyze the traffic performance impact of the relocation plan of the bus station to the BORR network and the Pangeran Sogiri Street. The traffic data is obtained from the field survey in the Baranangsiang bus station and the BORR network. Some other secondary data are obtained from the Dinas Lalu Lintas and Angkutan Jalan (DLLAJ Bogor city. Based on the obtained data, a micro simulation model is built by using Aimsun traffic micro simulation program. The analysis is conducted in three traffic performance parameters; the traffic density, speed, and vehicles queue length. With respect to the analysis result, the relocation causes a serious traffic problem to the BORR network and the P. Sogiri Street. To minimize the problem caused by the relocation, three scenarios are proposed and thus simulated based on the findings and observed traffic problems. The first proposed scenario is conducted by widening the P. Sogiri Street and providing a 4-4 toll payment gate system to the BORR. This first scenario is able to reduce traffic problem in some sections, but the average network density, speed and queue length are still high by 132%, -54%, and 200% respectively compared to the existing condition. The second scenario is conducted by widening the P. Sogiri Street and providing a 5-3 toll gate system. This second scenario is also able to reduce traffic problem in most sections, but the average network density, speed and queue length are still high by 248%, -70%, and 95% respectively compared to the main bus station

Fast and versatile microwave-assisted intramolecular Heck reaction in peptide macrocyclization using microwave energy.

Science.gov (United States)

Byk, Gerardo; Cohen-Ohana, Mirit; Raichman, Daniel

2006-01-01

We have revisited the intramolecular Heck reaction and investigated the microwave-assisted macrocyclization on preformed peptides using a model series of ring-varying peptides acryloyl-Gly-[Gly](n)-Phe(4-I)NHR; n = 0-4. The method was applied to both solution and solid supported cyclizations. We demonstrate that the intramolecular Heck reaction can be performed in peptides both in solution and solid support using a modified domestic microwave within 1 to 30 minutes in DMF under reflux with moderate yields ranging from 15 to 25% for a scale between 2-45 mg of linear precursors. The approach was applied to the synthesis of a constrained biologically relevant peptidomimetic bearing an Arg-Gly-Asp (RGD) sequence. These results make the microwave-assisted Heck reaction an attractive renovated approach for peptidomimetics. Copyright 2006 Wiley Periodicals, Inc.

A high-brightness thermionic microwave electron gun

Energy Technology Data Exchange (ETDEWEB)

Borland, Michael [Stanford Univ., CA (United States)

1991-02-01

In a collaborative effort by SSRL, AET Associates, and Varian Associates, a high-brightness microwave electron gun using a thermionic cathode has been designed, built, tested, and installed for use with the SSRL 150 MeV linear accelerator. This thesis discusses the physics behind the design and operation of the gun and associated systems, presenting predictions and experimental tests of the gun`s performance. The microwave gun concept is of increasing interest due to its promise of providing higher-current, lower-emittance electron beams than possible from conventional, DC gun technology. In a DC guns, accelerating gradients are less than 8 MV/m, while those in a microwave gun can exceed 100 MV/m, providing much more rapid initial acceleration, thereby reducing the deleterious effects of space-charge. Microwave guns produce higher momentum beams than DC guns, thus lessening space-charge effects during subsequent beam transport. Typical DC guns produce kinetic energies of 80--400 KeV, compared to 2--3 MeV for the SSRL microwave gun. ``State-of-the-art`` microwave gun designs employ laser-driven photocathodes, providing excellent performance but with greater complexity and monetary costs. A thermionic microwave gun with a magnetic bunching system is comparable in cost and complexity to a conventional system, but provides performance that is orders of magnitude better. Simulations of the SSRL microwave gun predict a normalized RMS emittance at the gun exist of < 10 π • m_ec • μm for a beam consisting of approximately 50% of the particles emitted from the gun, and having a momentum spread ±10%. These emittances are for up to 5 x 10⁹e^- per bunch. Chromatic aberrations in the transport line between the gun and linear accelerator increase this to typically < 30 π • m_e • μm.

A high-brightness thermionic microwave electron gun

International Nuclear Information System (INIS)

Borland, M.

1991-02-01

In a collaborative effort by SSRL, AET Associates, and Varian Associates, a high-brightness microwave electron gun using a thermionic cathode has been designed, built, tested, and installed for use with the SSRL 150 MeV linear accelerator. This thesis discusses the physics behind the design and operation of the gun and associated systems, presenting predictions and experimental tests of the gun's performance. The microwave gun concept is of increasing interest due to its promise of providing higher-current, lower-emittance electron beams than possible from conventional, DC gun technology. In a DC guns, accelerating gradients are less than 8 MV/m, while those in a microwave gun can exceed 100 MV/m, providing much more rapid initial acceleration, thereby reducing the deleterious effects of space-charge. Microwave guns produce higher momentum beams than DC guns, thus lessening space-charge effects during subsequent beam transport. Typical DC guns produce kinetic energies of 80--400 KeV, compared to 2--3 MeV for the SSRL microwave gun. ''State-of-the-art'' microwave gun designs employ laser-driven photocathodes, providing excellent performance but with greater complexity and monetary costs. A thermionic microwave gun with a magnetic bunching system is comparable in cost and complexity to a conventional system, but provides performance that is orders of magnitude better. Simulations of the SSRL microwave gun predict a normalized RMS emittance at the gun exist of e c · μm for a beam consisting of approximately 50% of the particles emitted from the gun, and having a momentum spread ±10%. These emittances are for up to 5 x 10 9 e - per bunch. Chromatic aberrations in the transport line between the gun and linear accelerator increase this to typically e · μm

Design of microwave vitrification systems for radioactive waste

International Nuclear Information System (INIS)

White, T.L.; Wilson, C.T.; Schaick, C.R.; Bostick, W.D.

1996-01-01

Oak Ridge National Laboratory (ORNL) is involved in the research and development of high-power microwave heating systems for the vitrification of DOE radioactive sludges. Design criteria for a continuous microwave vitrification system capable of processing a surrogate filtercake sludge representative of a typical waste-water treatment operation are discussed. A prototype 915 MHz, 75 kW microwave vitrification system or 'microwave melter' is described along with some early experimental results that demonstrate a 4 to 1 volume reduction of a surrogate ORNL filtercake sludge

TRMM MICROWAVE IMAGER (TMI) WENTZ OCEAN PRODUCTS V3

Data.gov (United States)

National Aeronautics and Space Administration — The TRMM Microwave Imager (TMI) is a 5-channel, dual-polarized, passive microwave radiometer. Microwave radiation is emitted by the Earth's surface and by water...

Microwave Heating of Synthetic Skin Samples for Potential Treatment of Gout Using the Metal-Assisted and Microwave-Accelerated Decrystallization Technique.

Science.gov (United States)

Toker, Salih; Boone-Kukoyi, Zainab; Thompson, Nishone; Ajifa, Hillary; Clement, Travis; Ozturk, Birol; Aslan, Kadir

2016-11-30

Physical stability of synthetic skin samples during their exposure to microwave heating was investigated to demonstrate the use of the metal-assisted and microwave-accelerated decrystallization (MAMAD) technique for potential biomedical applications. In this regard, optical microscopy and temperature measurements were employed for the qualitative and quantitative assessment of damage to synthetic skin samples during 20 s intermittent microwave heating using a monomode microwave source (at 8 GHz, 2-20 W) up to 120 s. The extent of damage to synthetic skin samples, assessed by the change in the surface area of skin samples, was negligible for microwave power of ≤7 W and more extensive damage (>50%) to skin samples occurred when exposed to >7 W at initial temperature range of 20-39 °C. The initial temperature of synthetic skin samples significantly affected the extent of change in temperature of synthetic skin samples during their exposure to microwave heating. The proof of principle use of the MAMAD technique was demonstrated for the decrystallization of a model biological crystal (l-alanine) placed under synthetic skin samples in the presence of gold nanoparticles. Our results showed that the size (initial size ∼850 μm) of l-alanine crystals can be reduced up to 60% in 120 s without damage to synthetic skin samples using the MAMAD technique. Finite-difference time-domain-based simulations of the electric field distribution of an 8 GHz monomode microwave radiation showed that synthetic skin samples are predicted to absorb ∼92.2% of the microwave radiation.

Microwave Heating of Synthetic Skin Samples for Potential Treatment of Gout Using the Metal-Assisted and Microwave-Accelerated Decrystallization Technique

Science.gov (United States)

2016-01-01

Physical stability of synthetic skin samples during their exposure to microwave heating was investigated to demonstrate the use of the metal-assisted and microwave-accelerated decrystallization (MAMAD) technique for potential biomedical applications. In this regard, optical microscopy and temperature measurements were employed for the qualitative and quantitative assessment of damage to synthetic skin samples during 20 s intermittent microwave heating using a monomode microwave source (at 8 GHz, 2–20 W) up to 120 s. The extent of damage to synthetic skin samples, assessed by the change in the surface area of skin samples, was negligible for microwave power of ≤7 W and more extensive damage (>50%) to skin samples occurred when exposed to >7 W at initial temperature range of 20–39 °C. The initial temperature of synthetic skin samples significantly affected the extent of change in temperature of synthetic skin samples during their exposure to microwave heating. The proof of principle use of the MAMAD technique was demonstrated for the decrystallization of a model biological crystal (l-alanine) placed under synthetic skin samples in the presence of gold nanoparticles. Our results showed that the size (initial size ∼850 μm) of l-alanine crystals can be reduced up to 60% in 120 s without damage to synthetic skin samples using the MAMAD technique. Finite-difference time-domain-based simulations of the electric field distribution of an 8 GHz monomode microwave radiation showed that synthetic skin samples are predicted to absorb ∼92.2% of the microwave radiation. PMID:27917407

Dehydration of sodium carbonate monohydrate with indirect microwave heating

International Nuclear Information System (INIS)

Seyrankaya, Abdullah; Ozalp, Baris

2006-01-01

In this study, dehydration of sodium carbonate monohydrate (Na 2 CO 3 .H 2 O) (SCM) in microwave (MW) field with silicon carbide (SiC) as an indirect heating medium was investigated. SCM samples containing up to 3% free moisture were placed in the microwave oven. The heating experiments showed that SCM is a poor microwave energy absorber for up to 6 min of irradiation at an 800 W of microwave power. The heat for SCM calcination is provided by SiC which absorbs microwave. The monohydrate is then converted to anhydrous sodium carbonate on the SiC plate by calcining, i.e. by removing the crystal water through heating of the monohydrate temperatures of over 120 deg. C. The calcination results in a solid phase recrystallization of the monohydrate into anhydrate. In the microwave irradiation process, dehydration of SCM in terms of indirect heating can be accelerated by increasing the microwave field power

Tunable Water-based Microwave Metasurface

DEFF Research Database (Denmark)

Kapitanova, Polina; Odit, Mikhail; Dobrykh, Dmitry

2017-01-01

A water-based dynamically tunable microwave metasurface is developed and experimentally investigated. A simple approach to tune the metasurface properties by changing the shape of water-based unit cells by gravitation force is proposed. The transmission spectra of the metasurface for linear...... angle. The proposed approach can be used to design cheap metasurfaces for electromagnetic wave control in the microwave frequency range....

Microwaves absorption in superconducting materials

International Nuclear Information System (INIS)

Biasi, R.S. de; Fernandes, A.A.R.; Pereira, R.F.R.

1989-01-01

Microwaves absorption measures in two superconductors ceramics systems, Y-Ba-Cu-O and Bi-Sr-Ca-Cu-O are compared with similars datas obtained in the same band of temperature by a conventional method, mutual inductance. The results suggest that the microwaves absorption can be used as single and non-destructive method for investigating the properties of ceramics superconductors. (C.G.C.) [pt

RF and microwave microelectronics packaging II

CERN Document Server

Sturdivant, Rick

2017-01-01

Reviews RF, microwave, and microelectronics assembly process, quality control, and failure analysis Bridges the gap between low cost commercial and hi-res RF/Microwave packaging technologies Engages in an in-depth discussion of challenges in packaging and assembly of advanced high-power amplifiers This book presents the latest developments in packaging for high-frequency electronics. It is a companion volume to “RF and Microwave Microelectronics Packaging” (2010) and covers the latest developments in thermal management, electrical/RF/thermal-mechanical designs and simulations, packaging and processing methods, and other RF and microwave packaging topics. Chapters provide detailed coverage of phased arrays, T/R modules, 3D transitions, high thermal conductivity materials, carbon nanotubes and graphene advanced materials, and chip size packaging for RF MEMS. It appeals to practicing engineers in the electronic packaging and high-frequency electronics domain, and to academic researchers interested in underst...

On-Chip Microwave Quantum Hall Circulator

Directory of Open Access Journals (Sweden)

A. C. Mahoney

2017-01-01

Full Text Available Circulators are nonreciprocal circuit elements that are integral to technologies including radar systems, microwave communication transceivers, and the readout of quantum information devices. Their nonreciprocity arises from the interference of microwaves over the centimeter scale of the signal wavelength, in the presence of bulky magnetic media that breaks time-reversal symmetry. Here, we realize a completely passive on-chip microwave circulator with size 1/1000th the wavelength by exploiting the chiral, “slow-light” response of a two-dimensional electron gas in the quantum Hall regime. For an integrated GaAs device with 330  μm diameter and about 1-GHz center frequency, a nonreciprocity of 25 dB is observed over a 50-MHz bandwidth. Furthermore, the nonreciprocity can be dynamically tuned by varying the voltage at the port, an aspect that may enable reconfigurable passive routing of microwave signals on chip.

Microwave absorption studies of MgB 2 superconductor

Indian Academy of Sciences (India)

Microwave absorption studies have been carried out on MgB2 superconductor using a standard X-band EPR spectrometer. The modulated low-field microwave absorption signals recorded for polycrystalline (grain size ∼ 10m) samples suggested the absence of weak-link character. The field dependent direct microwave ...

Direct-reading type microwave interferometer

International Nuclear Information System (INIS)

Matsuura, Kiyokata; Fujita, Junji; Ogata, Atsushi; Haba, Kiichiro.

1977-10-01

A new microwave interferometer has been developed and applied to the electron density measurement on JIPP T-II plasma device. The interferometer generates an output voltage proportional to the number of fringe shifts and also output pulses which indicate the change of electron density for the convenience of data processing, where the resolution is a quarter of fringe shift. The principle is based on the digitization of fringe shifts utilizing the phase detection of microwave signals with two-level modulation of source frequency. With this system and 70 GHz microwave source, a change of electron density as rapid as about 2 x 10 13 cm -3 in 1 ms has been measured at the tokamak operation of JIPP T-II. (auth.)

Post-tsunami relocation of fisher settlements in South Asia: evidence from the Coromandel Coast, India.

Science.gov (United States)

Bavinck, Maarten; de Klerk, Leo; van der Plaat, Felice; Ravesteijn, Jorik; Angel, Dominique; Arendsen, Hendrik; van Dijk, Tom; de Hoog, Iris; van Koolwijk, Ant; Tuijtel, Stijn; Zuurendonk, Benjamin

2015-07-01

The tsunami that struck the coasts of India on 26 December 2004 resulted in the large-scale destruction of fisher habitations. The post-tsunami rehabilitation effort in Tamil Nadu was directed towards relocating fisher settlements in the interior. This paper discusses the outcomes of a study on the social effects of relocation in a sample of nine communities along the Coromandel Coast. It concludes that, although the participation of fishing communities in house design and in allocation procedures has been limited, many fisher households are satisfied with the quality of the facilities. The distance of the new settlements to the shore, however, is regarded as an impediment to engaging in the fishing profession, and many fishers are actually moving back to their old locations. This raises questions as to the direction of coastal zone policy in India, as well as to the weight accorded to safety (and other coastal development interests) vis-à-vis the livelihood needs of fishers. © 2015 The Author(s). Disasters © Overseas Development Institute, 2015.

A Review of Microwave-Assisted Reactions for Biodiesel Production

Directory of Open Access Journals (Sweden)

Saifuddin Nomanbhay

2017-06-01

Full Text Available The conversion of biomass into chemicals and biofuels is an active research area as trends move to replace fossil fuels with renewable resources due to society’s increased concern towards sustainability. In this context, microwave processing has emerged as a tool in organic synthesis and plays an important role in developing a more sustainable world. Integration of processing methods with microwave irradiation has resulted in a great reduction in the time required for many processes, while the reaction efficiencies have been increased markedly. Microwave processing produces a higher yield with a cleaner profile in comparison to other methods. The microwave processing is reported to be a better heating method than the conventional methods due to its unique thermal and non-thermal effects. This paper provides an insight into the theoretical aspects of microwave irradiation practices and highlights the importance of microwave processing. The potential of the microwave technology to accomplish superior outcomes over the conventional methods in biodiesel production is presented. A green process for biodiesel production using a non-catalytic method is still new and very costly because of the supercritical condition requirement. Hence, non-catalytic biodiesel conversion under ambient pressure using microwave technology must be developed, as the energy utilization for microwave-based biodiesel synthesis is reported to be lower and cost-effective.

Palliative options of last resort: a comparison of voluntarily stopping eating and drinking, terminal sedation, physician-assisted suicide, and voluntary active euthanasia.

Science.gov (United States)

Quill, T E; Lo, B; Brock, D W

1997-12-17

Palliative care is generally agreed to be the standard of care for the dying, but there remain some patients for whom intolerable suffering persists. In the face of ethical and legal controversy about the acceptability of physician-assisted suicide and voluntary active euthanasia, voluntarily stopping eating and drinking and terminal sedation have been proposed as ethically superior responses of last resort that do not require changes in professional standards or the law. The clinical and ethical differences and similarities between these 4 practices are critically compared in light of the doctrine of double effect, the active/passive distinction, patient voluntariness, proportionality between risks and benefits, and the physician's potential conflict of duties. Terminal sedation and voluntarily stopping eating and drinking would allow clinicians to remain responsive to a wide range of patient suffering, but they are ethically and clinically more complex and closer to physician-assisted suicide and voluntary active euthanasia than is ordinarily acknowledged. Safeguards are presented for any medical action that may hasten death, including determining that palliative care is ineffective, obtaining informed consent, ensuring diagnostic and prognostic clarity, obtaining an independent second opinion, and implementing reporting and monitoring processes. Explicit public policy about which of these practices are permissible would reassure the many patients who fear a bad death in their future and allow for a predictable response for the few whose suffering becomes intolerable in spite of optimal palliative care.

Trends of microwave dielectric materials for antenna application

International Nuclear Information System (INIS)

Sulong, T. A. T.; Osman, R. A. M.; Idris, M. S.

2016-01-01

Rapid development of a modern microwave communication system requires a high quality microwave dielectric ceramic material to be used as mobile and satellite communication. High permittivity of dielectric ceramics leads to fabrication of compact device for electronic components. Dielectric ceramics which used for microwave applications required three important parameters such as high or appropriate permittivity (ε_r), high quality factor (Q _f ≥ 5000 GH z) and good temperature coefficient of resonant frequency (τ_f). This paper review of various dielectric ceramic materials used as microwave dielectric materials and related parameters for antenna applications.

Design of microwave vitrification systems for radioactive waste

International Nuclear Information System (INIS)

White, T.L.; Wilson, C.T.; Schaich, C.R.; Bostick, T.L.

1995-01-01

Oak Ridge National Laboratory (ORNL) is involved in the research and development of high-power microwave heating systems for the vitrification of Department of Energy (DOE) radioactive sludges. Design criteria for a continuous microwave vitrification system capable of processing a surrogate filtercake sludge representative of a typical waste-water treatment operation are discussed. A prototype 915-MHz, 75-kW microwave vitrification system or ''microwave melter'' is described along with some early experimental results that demonstrate a 4 to 1 volume reduction of a surrogate ORNL filtercake sludge

Job Satisfaction and Relocation Desire among Pediatric Dentists in Puerto Rico.

Science.gov (United States)

Arévalo, Oscar; Saman, Daniel M; Tabares, Miguel; Hernández, Ana; Sanders-Ward, Rebecca

2015-12-01

To determine the levels of satisfaction, license status, and desire to relocate of pediatric dentists in Puerto Rico. Pediatric dentists in Puerto Rico were surveyed via telephone interviews. Data were collected through a 34-item questionnaire that explored satisfaction as related to income, continuing education, professional goals, and participation in the Mi Salud program. Frequencies, chi-square analysis, and Fisher's exact 2-tailed t-test were utilized to determine the relationships between satisfaction and the demographics of the pediatric dentists. Sixty pediatric dentists participated in our survey-77% of the total number of pediatric dentists practicing in Puerto Rico. Overall, 65% of the participating pediatric dentists expressed dissatisfaction. Male pediatric dentists were more dissatisfied than their female colleagues were. Most pediatric dentists participating in Mi Salud expressed dissatisfaction. When asked about whether or not they had considered migrating to the mainland, those who were dissatisfied were more likely to have considered that idea than were those who were satisfied. Overall, 57% of the pediatric dentists comprising our sample had considered relocating to the continental United States. In general, the pediatric dentists who participated in our study expressed dissatisfaction in most areas except when asked about their ability to reach professional goals. Determining the levels of satisfaction of health care providers is important in the maintaining of an adequate workforce. As current levels of dissatisfaction are high, it is important to determine what variables are related to satisfaction so that corrective measures can be taken to ensure that retention rates improve, thereby maintaining an adequate pediatric dental workforce.

Vanishing microwave effects : influence of heterogeneity

NARCIS (Netherlands)

Dressen, M.H.C.L.; Kruijs, van de B.H.P.; Meuldijk, J.; Vekemans, J.A.J.M.; Hulshof, L.A.

2007-01-01

A consistent setup of experiments has been conducted to demonstrate an enhanced reaction rate under microwave irradiation as compared to conventional heating, i.e. a real microwave effect. It was found that addition of a cosolvent, diminishing the heterogeneous character of the reaction mixture,

Accelerated staining technique using kitchen microwave oven

Directory of Open Access Journals (Sweden)

Archana Mukunda

2015-01-01

Full Text Available Introduction: Histopathological diagnosis of specimens is greatly dependent on good sample preparation and staining. Both of these processes is governed by diffusion of fluids and dyes in and out of the tissue, which is the key to staining. Diffusion of fluids can be accelerated by the application of heat that reduces the time of staining from hours to the minute. We modified an inexpensive model of kitchen microwave oven for staining. This study is an attempt to compare the reliability of this modified technique against the tested technique of routine staining so as to establish the kitchen microwave oven as a valuable diagnostic tool. Materials and Methods: Sixty different tissue blocks were used to prepare 20 pairs of slides for 4 different stains namely hematoxylin and eosin, Van Gieson′s, 0.1% toluidine blue and periodic acid-Schiff. From each tissue block, two bits of tissues were mounted on two different slides. One slide was stained routinely, and the other stained inside a microwave. A pathologist evaluated the stained slides and the results so obtained were analyzed statistically. Results: Microwave staining considerably cut down the staining time from hours to seconds. Microwave staining showed no loss of cellular and nuclear details, uniform-staining characteristics and was of excellent quality. Interpretation and Conclusion: The cellular details, nuclear details and staining characteristics of microwave stained tissues were better than or equal to the routine stained tissue. The overall quality of microwave-stained sections was found to be better than the routine stained tissue in majority of cases.

77 FR 41956 - Relocation of and Spectrum Sharing by Federal Government Stations-Technical Panel and Dispute...

Science.gov (United States)

2012-07-17

... process through which any disagreements that may arise over the execution, timing, or cost of transition... or employee from each agency who is responsible for relocation or sharing efforts and who is... also an employee of one of the respective appointing agencies, his or her regular compensation in that...

Microwave chemistry: Effect of ions on dielectric heating in microwave ovens

Directory of Open Access Journals (Sweden)

Jamil Anwar

2015-01-01

Full Text Available To understand the interactions of microwaves with dielectric materials and their conversion to thermal energy in aqueous systems, the effect of ionic concentration has been studied. Aqueous solutions of inorganic ions were exposed to microwaves (2.45 GHz in a modified oven under identical conditions. Difference in solution temperatures with reference to pure (deionized water was monitored in each case. A significant decrease in the temperature was observed with an increase in the quantity of ions. Experiments were repeated with several inorganic ions varying in size and charge. The information can be helpful in understanding the role of ions during dielectric heating.

Wages and commuting: quasi-natural experiments' evidence from firms that relocate

DEFF Research Database (Denmark)

Mulalic, Ismir; Pilegaard, Ninette; van Ommeren, Jos N.

We examine the causal effect of commuting distance on workers' wages in a quasi-natural experiments setting using information on all workers in Denmark. We account for endogeneity of distance by using changes in distance that are due to firms’ relocations. A one kilometre increase in commuting...... distance induces a wage increase of about 0.42%, suggesting an hourly commuting time compensation of 49% of the hourly net wage. Our findings are consistent with wage bargaining theory and due to the experimental setup we are able to exclude many competing explanations of the wage-distance relationship....

Precision microwave applicators and systems for plasma and materials processing

International Nuclear Information System (INIS)

Asmussen, J.; Garard, R.

1988-01-01

Modern applications of microwave energy have imposed new requirements upon microwave processing systems. Interest in energy efficiency, processing uniformity and control of process cycles has placed new design conditions upon microwave power oscillators, microwave systems and microwave applicator design. One approach of meeting new application requirements is the use of single-mode or controlled multimode applicators. The use of a single-mode applicator for plasma generation and materials processing will be presented. Descriptions of actual applicator designs for heating, curing, and processing of solid materials and the generations of high and low pressure discharges will be given. The impact of these applicators on the total microwave system including the microwave power source will be described. Specific examples of applicator and associated microwave systems will be detailed for the applications of (1) plasma thin film deposition and (2) the precision processing and diagnosis of materials. Methods of process control and diagnosis, control of process uniformity and process scale up are discussed

Microwave bale moisture sensing: Field trial

Science.gov (United States)

A microwave moisture measurement technique was developed for moisture sensing of cotton bales after the bale press. The technique measures the propagation delay of a microwave signal that is transmitted through the cotton bale. This research conducted a field trial to test the sensor in a commercial...

Cosmic microwave background, where next?

CERN Multimedia

CERN. Geneva

2009-01-01

Ground-based, balloon-borne and space-based experiments will observe the Cosmic Microwave Background in greater details to address open questions about the origin and the evolution of the Universe. In particular, detailed observations the polarization pattern of the Cosmic Microwave Background radiation have the potential to directly probe physics at the GUT scale and illuminate aspects of the physics of the very early Universe.

The Interaction of C-Band Microwaves with Large Plasma Sheets

International Nuclear Information System (INIS)

Ding Liang; Huo Wenqing; Yang Xinjie; Xu Yuemin

2012-01-01

A large plasma sheet 60 cm×60 cm×2 cm in size was generated using a hollow cathode, and measurements were conducted for interactions including transmission, reflection and absorption. With different discharge parameters, plasma sheets can vary and influence microwave strength. Microwave reflection decreases when the discharge current rises, and the opposite occurs in transmission. The C-band microwave is absorbed when it is propagated through large plasma sheets at higher pressure. When plasma density and collision frequency are fitted with incident microwave frequency, a large amount of microwave energy is consumed. Reflection, transmission and absorption all exist simultaneously. Plasma sheets are an attractive alternative to microwave steering at low pressure, and the microwave reflection used in receiving radar can be altered by changing the discharge parameters.

A monolithic integrated photonic microwave filter

Science.gov (United States)

Fandiño, Javier S.; Muñoz, Pascual; Doménech, David; Capmany, José

2017-02-01

Meeting the increasing demand for capacity in wireless networks requires the harnessing of higher regions in the radiofrequency spectrum, reducing cell size, as well as more compact, agile and power-efficient base stations that are capable of smoothly interfacing the radio and fibre segments. Fully functional microwave photonic chips are promising candidates in attempts to meet these goals. In recent years, many integrated microwave photonic chips have been reported in different technologies. To the best of our knowledge, none has monolithically integrated all the main active and passive optoelectronic components. Here, we report the first demonstration of a tunable microwave photonics filter that is monolithically integrated into an indium phosphide chip. The reconfigurable radiofrequency photonic filter includes all the necessary elements (for example, lasers, modulators and photodetectors), and its response can be tuned by means of control electric currents. This is an important step in demonstrating the feasibility of integrated and programmable microwave photonic processors.

Global Warming and the Microwave Background

Directory of Open Access Journals (Sweden)

Robitaille P.-M.

2009-04-01

Full Text Available In the work, the importance of assigning the microwave background to the Earth is ad- dressed while emphasizing the consequences for global climate change. Climate mod- els can only produce meaningful forecasts when they consider the real magnitude of all radiative processes. The oceans and continents both contribute to terrestrial emis- sions. However, the extent of oceanic radiation, particularly in the microwave region, raises concerns. This is not only since the globe is covered with water, but because the oceans themselves are likely to be weaker emitters than currently believed. Should the microwave background truly be generated by the oceans of the Earth, our planet would be a much less efficient emitter of radiation in this region of the electromagnetic spectrum. Furthermore, the oceans would appear unable to increase their emissions in the microwave in response to temperature elevation, as predicted by Stefan’s law. The results are significant relative to the modeling of global warming.

Microwave solidification development for Rocky Flats waste

Energy Technology Data Exchange (ETDEWEB)

Dixon, D.; Erle, R.; Eschen, V. [and others

1994-04-01

The Microwave Engineering Team at the Rocky Flats Plant has developed a production-scale system for the treatment of hazardous, radioactive, and mixed wastes using microwave energy. The system produces a vitreous final form which meets the acceptance criteria for shipment and disposal. The technology also has potential for application on various other waste streams from the public and private sectors. Technology transfer opportunities are being identified and pursued for commercialization of the microwave solidification technology.

Microwave solidification development for Rocky Flats waste

International Nuclear Information System (INIS)

Dixon, D.; Erle, R.; Eschen, V.

1994-04-01

The Microwave Engineering Team at the Rocky Flats Plant has developed a production-scale system for the treatment of hazardous, radioactive, and mixed wastes using microwave energy. The system produces a vitreous final form which meets the acceptance criteria for shipment and disposal. The technology also has potential for application on various other waste streams from the public and private sectors. Technology transfer opportunities are being identified and pursued for commercialization of the microwave solidification technology

Techniques for ceramic sintering using microwave energy

International Nuclear Information System (INIS)

Kimrey, H.D.; Janney, M.A.; Becher, P.F.

1987-01-01

The use of microwave energy for ceramic sintering offers exciting new possibilities for materials processing. Based on experience gathered in microwave processing associated with the heating of fusion plasmas, we have developed hardware and methods for uniformly heating ceramic parts of large volume and irregular shape to temperatures in excess of 1600 0 C, in vacuum or pressurized atmosphere. Microwave processing at 28 GHz yields enhanced densification rates with a corresponding reduction in sintering temperatures. 6 refs

Microwave processing for ceramic materials in microsystem technology

International Nuclear Information System (INIS)

Rhee, S.

2002-11-01

In this study, the applicability of microwaves for sintering of monolithic ceramics and ceramic microcomponents was investigated. Experiments with 2.45 GHz and 30 GHz microwaves were conducted and contrasted to conventional thermal processing. The advantages and disadvantages of microwave processing were then assessed. Nanoscale zirconia and sub-micron lead-zirconate-titanate electroceramics were selected for the evaluation. (orig.)

Microwave-induced torrefaction of rice husk and sugarcane residues

International Nuclear Information System (INIS)

Wang, M.J.; Huang, Y.F.; Chiueh, P.T.; Kuan, W.H.; Lo, S.L.

2012-01-01

This study utilized microwave irradiation to induce torrefaction (mild pyrolysis) of rice husk and sugarcane residues by varying different parameters, including microwave power level, processing time, water content, and particle size of biomass. Proper microwave power levels are suggested to be set between 250 and 300 W for the torrefaction of these two agricultural residues. With proper processing time, the caloric value can increase 26% for rice husk and 57% for sugarcane residue. Compared to dry rice husk, both maximum reaction temperature and mass reduction ratio increased with higher water content (not over 10%). Moreover, the particle size of biomass needs not to be very small. The mass reduction ratios were 65 wt.%, 69 wt.%, and 72 wt.%, when the sizes were 50/100 mesh, 100/200 mesh, and >200 mesh, respectively. Microwave-induced torrefaction reduces more oxygen/carbon ratio of biomass in comparison with traditional torrefaction. Microwave-induced torrefaction is considered as an efficient and promising technology with great potential. -- Highlights: ► Microwave-induced torrefaction is promising compared to conventional methods. ► Neither high microwave power nor small particle size is needed. ► High energy yield can be met under mild microwave power. ► Caloric value can increase up to about 60%.

Microwave reflection, transmission, and absorption by human brain tissue

Science.gov (United States)

Ansari, M. A.; Akhlaghipour, N.; Zarei, M.; Niknam, A. R.

2018-04-01

These days, the biological effects of electromagnetic (EM) radiations on the brain, especially in the frequency range of mobile communications, have caught the attention of many scientists. Therefore, in this paper, the propagation of mobile phone electromagnetic waves in the brain tissues is investigated analytically and numerically. The brain is modeled by three layers consisting of skull, grey and white matter. First, we have analytically calculated the microwave reflection, transmission, and absorption coefficients using signal flow graph technique. The effect of microwave frequency and variations in the thickness of layers on the propagation of microwave through brain are studied. Then, the penetration of microwave in the layers is numerically investigated by Monte Carlo method. It is shown that the analytical results are in good agreement with those obtained by Monte Carlo method. Our results indicate the absorbed microwave energy depends on microwave frequency and thickness of brain layers, and the absorption coefficient is optimized at a number of frequencies. These findings can be used for comparing the microwave absorbed energy in a child's and adult's brain.

Preparation of silica nanoparticles through microwave-assisted acid-catalysis.

Science.gov (United States)

Lovingood, Derek D; Owens, Jeffrey R; Seeber, Michael; Kornev, Konstantin G; Luzinov, Igor

2013-12-16

Microwave-assisted synthetic techniques were used to quickly and reproducibly produce silica nanoparticle sols using an acid catalyst with nanoparticle diameters ranging from 30-250 nm by varying the reaction conditions. Through the selection of a microwave compatible solvent, silicic acid precursor, catalyst, and microwave irradiation time, these microwave-assisted methods were capable of overcoming the previously reported shortcomings associated with synthesis of silica nanoparticles using microwave reactors. The siloxane precursor was hydrolyzed using the acid catalyst, HCl. Acetone, a low-tan δ solvent, mediates the condensation reactions and has minimal interaction with the electromagnetic field. Condensation reactions begin when the silicic acid precursor couples with the microwave radiation, leading to silica nanoparticle sol formation. The silica nanoparticles were characterized by dynamic light scattering data and scanning electron microscopy, which show the materials' morphology and size to be dependent on the reaction conditions. Microwave-assisted reactions produce silica nanoparticles with roughened textured surfaces that are atypical for silica sols produced by Stöber's methods, which have smooth surfaces.

Simple microwave plasma source at atmospheric pressure

International Nuclear Information System (INIS)

Kim, Jeong H.; Hong, Yong C.; Kim, Hyoung S.; Uhm, Han S.

2003-01-01

We have developed a thermal plasma source operating without electrodes. One electrodeless torch is the microwave plasma-torch, which can produce plasmas in large quantities. We can generate plasma at an atmospheric pressure by marking use of the same magnetrons used as commercial microwave ovens. Most of the magnetrons are operated at the frequency of 2.45 GHz; the magnetron power microwave is about 1kW. Electromagnetic waves from the magnetrons propagate through a shorted waveguide. Plasma was generated under a resonant condition, by an auxiliary ignition system. The plasma is stabilized by vortex stabilization. Also, a high-power and high-efficiency microwave plasma-torch has been operated in air by combining two microwave plasma sources with 1kW, 2.45 GHz. They are arranged in series to generate a high-power plasma flame. The second torch adds all its power to the plasma flame of the first torch. Basically, electromagnetic waves in the waveguide were studied by a High Frequency Structure Simulator (HFSS) code and preliminary experiments were conducted

Compact torus compression of microwaves

International Nuclear Information System (INIS)

Hewett, D.W.; Langdon, A.B.

1985-01-01

The possibility that a compact torus (CT) might be accelerated to large velocities has been suggested by Hartman and Hammer. If this is feasible one application of these moving CTs might be to compress microwaves. The proposed mechanism is that a coaxial vacuum region in front of a CT is prefilled with a number of normal electromagnetic modes on which the CT impinges. A crucial assumption of this proposal is that the CT excludes the microwaves and therefore compresses them. Should the microwaves penetrate the CT, compression efficiency is diminished and significant CT heating results. MFE applications in the same parameters regime have found electromagnetic radiation capable of penetrating, heating, and driving currents. We report here a cursory investigation of rf penetration using a 1-D version of a direct implicit PIC code

Advanced Microwave Circuits and Systems

DEFF Research Database (Denmark)

This book is based on recent research work conducted by the authors dealing with the design and development of active and passive microwave components, integrated circuits and systems. It is divided into seven parts. In the first part comprising the first two chapters, alternative concepts...... amplifier architectures. In addition, distortion analysis and power combining techniques are considered. Another key element in most microwave systems is a signal generator. It forms the heart of all kinds of communication and radar systems. The fourth part of this book is dedicated to signal generators...... push currently available technologies to the limits. Some considerations to meet the growing requirements are provided in the fifth part of this book. The following part deals with circuits based on LTCC and MEMS technologies. The book concludes with chapters considering application of microwaves...